dts: update to v5.17-rc4

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

13 files changed, 40 insertions, 52 deletions

diff --git a/dts/src/arm64/amlogic/meson-g12-common.dtsi b/dts/src/arm64/amlogic/meson-g12-common.dtsi
index 517519e6e8..f84d4b489e 100644
--- a/dts/src/arm64/amlogic/meson-g12-common.dtsi
+++ b/dts/src/arm64/amlogic/meson-g12-common.dtsi
@@ -107,6 +107,12 @@
 			no-map;
 		};
 
+		/* 32 MiB reserved for ARM Trusted Firmware (BL32) */
+		secmon_reserved_bl32: secmon@5300000 {
+			reg = <0x0 0x05300000 0x0 0x2000000>;
+			no-map;
+		};
+
 		linux,cma {
 			compatible = "shared-dma-pool";
 			reusable;
diff --git a/dts/src/arm64/amlogic/meson-g12a-sei510.dts b/dts/src/arm64/amlogic/meson-g12a-sei510.dts
index d8838dde0f..4fb31c2ba3 100644
--- a/dts/src/arm64/amlogic/meson-g12a-sei510.dts
+++ b/dts/src/arm64/amlogic/meson-g12a-sei510.dts
@@ -157,14 +157,6 @@
 		regulator-always-on;
 	};
 
-	reserved-memory {
-		/* TEE Reserved Memory */
-		bl32_reserved: bl32@5000000 {
-			reg = <0x0 0x05300000 0x0 0x2000000>;
-			no-map;
-		};
-	};
-
 	sdio_pwrseq: sdio-pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
diff --git a/dts/src/arm64/amlogic/meson-g12b-odroid-n2.dtsi b/dts/src/arm64/amlogic/meson-g12b-odroid-n2.dtsi
index 3e968b2441..fd3fa82e4c 100644
--- a/dts/src/arm64/amlogic/meson-g12b-odroid-n2.dtsi
+++ b/dts/src/arm64/amlogic/meson-g12b-odroid-n2.dtsi
@@ -17,7 +17,7 @@
 		rtc1 = &vrtc;
 	};
 
-	dioo2133: audio-amplifier-0 {
+	dio2133: audio-amplifier-0 {
 		compatible = "simple-audio-amplifier";
 		enable-gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>;
 		VCC-supply = <&vcc_5v>;
@@ -219,7 +219,7 @@
 		audio-widgets = "Line", "Lineout";
 		audio-aux-devs = <&tdmout_b>, <&tdmout_c>, <&tdmin_a>,
 				 <&tdmin_b>, <&tdmin_c>, <&tdmin_lb>,
-				 <&dioo2133>;
+				 <&dio2133>;
 		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
 				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
 				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
diff --git a/dts/src/arm64/amlogic/meson-gx.dtsi b/dts/src/arm64/amlogic/meson-gx.dtsi
index 6b457b2c30..aa14ea017a 100644
--- a/dts/src/arm64/amlogic/meson-gx.dtsi
+++ b/dts/src/arm64/amlogic/meson-gx.dtsi
@@ -49,6 +49,12 @@
 			no-map;
 		};
 
+		/* 32 MiB reserved for ARM Trusted Firmware (BL32) */
+		secmon_reserved_bl32: secmon@5300000 {
+			reg = <0x0 0x05300000 0x0 0x2000000>;
+			no-map;
+		};
+
 		linux,cma {
 			compatible = "shared-dma-pool";
 			reusable;
diff --git a/dts/src/arm64/amlogic/meson-sm1-bananapi-m5.dts b/dts/src/arm64/amlogic/meson-sm1-bananapi-m5.dts
index 212c6aa5a3..5751c48620 100644
--- a/dts/src/arm64/amlogic/meson-sm1-bananapi-m5.dts
+++ b/dts/src/arm64/amlogic/meson-sm1-bananapi-m5.dts
@@ -123,7 +123,7 @@
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <3300000>;
 
-		enable-gpio = <&gpio GPIOE_2 GPIO_ACTIVE_HIGH>;
+		enable-gpio = <&gpio_ao GPIOE_2 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 		regulator-always-on;
 
diff --git a/dts/src/arm64/amlogic/meson-sm1-odroid.dtsi b/dts/src/arm64/amlogic/meson-sm1-odroid.dtsi
index 0bd1e98a0e..ddb1b34539 100644
--- a/dts/src/arm64/amlogic/meson-sm1-odroid.dtsi
+++ b/dts/src/arm64/amlogic/meson-sm1-odroid.dtsi
@@ -48,7 +48,7 @@
 		regulator-max-microvolt = <3300000>;
 		vin-supply = <&vcc_5v>;
 
-		enable-gpio = <&gpio GPIOE_2 GPIO_ACTIVE_HIGH>;
+		enable-gpio = <&gpio_ao GPIOE_2 GPIO_OPEN_DRAIN>;
 		enable-active-high;
 		regulator-always-on;
 
diff --git a/dts/src/arm64/amlogic/meson-sm1-sei610.dts b/dts/src/arm64/amlogic/meson-sm1-sei610.dts
index 427475846f..a5d79f2f7c 100644
--- a/dts/src/arm64/amlogic/meson-sm1-sei610.dts
+++ b/dts/src/arm64/amlogic/meson-sm1-sei610.dts
@@ -203,14 +203,6 @@
 		regulator-always-on;
 	};
 
-	reserved-memory {
-		/* TEE Reserved Memory */
-		bl32_reserved: bl32@5000000 {
-			reg = <0x0 0x05300000 0x0 0x2000000>;
-			no-map;
-		};
-	};
-
 	sdio_pwrseq: sdio-pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
diff --git a/dts/src/arm64/freescale/fsl-ls1028a-kontron-sl28.dts b/dts/src/arm64/freescale/fsl-ls1028a-kontron-sl28.dts
index d74e738e40..c03f4e1833 100644
--- a/dts/src/arm64/freescale/fsl-ls1028a-kontron-sl28.dts
+++ b/dts/src/arm64/freescale/fsl-ls1028a-kontron-sl28.dts
@@ -157,6 +157,10 @@
 	};
 };
 
+&ftm_alarm0 {
+	status = "okay";
+};
+
 &gpio1 {
 	gpio-line-names =
 		"", "", "", "", "", "", "", "",
diff --git a/dts/src/arm64/freescale/imx8mq-librem5.dtsi b/dts/src/arm64/freescale/imx8mq-librem5.dtsi
index f3e3418f7e..2d4a472af6 100644
--- a/dts/src/arm64/freescale/imx8mq-librem5.dtsi
+++ b/dts/src/arm64/freescale/imx8mq-librem5.dtsi
@@ -1115,8 +1115,8 @@
 	status = "okay";
 
 	ports {
-		port@1 {
-			reg = <1>;
+		port@0 {
+			reg = <0>;
 
 			mipi1_sensor_ep: endpoint {
 				remote-endpoint = <&camera1_ep>;
diff --git a/dts/src/arm64/freescale/imx8mq.dtsi b/dts/src/arm64/freescale/imx8mq.dtsi
index 2df2510d01..e92ebb6147 100644
--- a/dts/src/arm64/freescale/imx8mq.dtsi
+++ b/dts/src/arm64/freescale/imx8mq.dtsi
@@ -554,7 +554,7 @@
 				assigned-clock-rates = <0>, <0>, <0>, <594000000>;
 				status = "disabled";
 
-				port@0 {
+				port {
 					lcdif_mipi_dsi: endpoint {
 						remote-endpoint = <&mipi_dsi_lcdif_in>;
 					};
@@ -1151,8 +1151,8 @@
 					#address-cells = <1>;
 					#size-cells = <0>;
 
-					port@0 {
-						reg = <0>;
+					port@1 {
+						reg = <1>;
 
 						csi1_mipi_ep: endpoint {
 							remote-endpoint = <&csi1_ep>;
@@ -1203,8 +1203,8 @@
 					#address-cells = <1>;
 					#size-cells = <0>;
 
-					port@0 {
-						reg = <0>;
+					port@1 {
+						reg = <1>;
 
 						csi2_mipi_ep: endpoint {
 							remote-endpoint = <&csi2_ep>;
diff --git a/dts/src/arm64/freescale/mba8mx.dtsi b/dts/src/arm64/freescale/mba8mx.dtsi
index f27e3c8de9..ce6d5bdba0 100644
--- a/dts/src/arm64/freescale/mba8mx.dtsi
+++ b/dts/src/arm64/freescale/mba8mx.dtsi
@@ -91,7 +91,7 @@
 
 	sound {
 		compatible = "fsl,imx-audio-tlv320aic32x4";
-		model = "tqm-tlv320aic32";
+		model = "imx-audio-tlv320aic32x4";
 		ssi-controller = <&sai3>;
 		audio-codec = <&tlv320aic3x04>;
 	};
diff --git a/dts/src/arm64/ti/k3-j721s2-common-proc-board.dts b/dts/src/arm64/ti/k3-j721s2-common-proc-board.dts
index a5a24f9f46..b210cc07c5 100644
--- a/dts/src/arm64/ti/k3-j721s2-common-proc-board.dts
+++ b/dts/src/arm64/ti/k3-j721s2-common-proc-board.dts
@@ -15,8 +15,18 @@
 	model = "Texas Instruments J721S2 EVM";
 
 	chosen {
-		stdout-path = "serial10:115200n8";
-		bootargs = "console=ttyS10,115200n8 earlycon=ns16550a,mmio32,2880000";
+		stdout-path = "serial2:115200n8";
+		bootargs = "console=ttyS2,115200n8 earlycon=ns16550a,mmio32,2880000";
+	};
+
+	aliases {
+		serial1 = &mcu_uart0;
+		serial2 = &main_uart8;
+		mmc0 = &main_sdhci0;
+		mmc1 = &main_sdhci1;
+		can0 = &main_mcan16;
+		can1 = &mcu_mcan0;
+		can2 = &mcu_mcan1;
 	};
 
 	evm_12v0: fixedregulator-evm12v0 {
diff --git a/dts/src/arm64/ti/k3-j721s2.dtsi b/dts/src/arm64/ti/k3-j721s2.dtsi
index 80d3cae03e..fe5234c40f 100644
--- a/dts/src/arm64/ti/k3-j721s2.dtsi
+++ b/dts/src/arm64/ti/k3-j721s2.dtsi
@@ -21,28 +21,6 @@
 	#address-cells = <2>;
 	#size-cells = <2>;
 
-	aliases {
-		serial0 = &wkup_uart0;
-		serial1 = &mcu_uart0;
-		serial2 = &main_uart0;
-		serial3 = &main_uart1;
-		serial4 = &main_uart2;
-		serial5 = &main_uart3;
-		serial6 = &main_uart4;
-		serial7 = &main_uart5;
-		serial8 = &main_uart6;
-		serial9 = &main_uart7;
-		serial10 = &main_uart8;
-		serial11 = &main_uart9;
-		mmc0 = &main_sdhci0;
-		mmc1 = &main_sdhci1;
-		can0 = &main_mcan16;
-		can1 = &mcu_mcan0;
-		can2 = &mcu_mcan1;
-		can3 = &main_mcan3;
-		can4 = &main_mcan5;
-	};
-
 	chosen { };
 
 	cpus {