diff options
| author | Sascha Hauer <s.hauer@pengutronix.de> | 2021-05-17 13:27:45 +0200 |
|---|---|---|
| committer | Sascha Hauer <s.hauer@pengutronix.de> | 2021-05-17 16:23:06 +0200 |
| commit | a5a4c1d5a3c4f89059fb612b5786ec8b61b959f1 (patch) | |
| tree | fe87198c6cc02e54d3131d087d2b9f7c3e96c689 /dts/src/arm64 | |
| parent | ba9de18c5f211678f5d0f67a0758c632ab774cca (diff) | |
| download | barebox-a5a4c1d5a3c4f89059fb612b5786ec8b61b959f1.tar.gz barebox-a5a4c1d5a3c4f89059fb612b5786ec8b61b959f1.tar.xz | |
dts: update to v5.13-rc1
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Diffstat (limited to 'dts/src/arm64')
268 files changed, 17744 insertions, 1851 deletions
diff --git a/dts/src/arm64/allwinner/sun50i-a64-amarula-relic.dts b/dts/src/arm64/allwinner/sun50i-a64-amarula-relic.dts index c7bd73f35e..f17cc89f47 100644 --- a/dts/src/arm64/allwinner/sun50i-a64-amarula-relic.dts +++ b/dts/src/arm64/allwinner/sun50i-a64-amarula-relic.dts @@ -173,7 +173,7 @@ compatible = "x-powers,axp803"; reg = <0x3a3>; interrupt-parent = <&r_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>; x-powers,drive-vbus-en; /* set N_VBUSEN as output pin */ }; }; diff --git a/dts/src/arm64/allwinner/sun50i-a64-bananapi-m64.dts b/dts/src/arm64/allwinner/sun50i-a64-bananapi-m64.dts index f7fe9fa50c..997a193726 100644 --- a/dts/src/arm64/allwinner/sun50i-a64-bananapi-m64.dts +++ b/dts/src/arm64/allwinner/sun50i-a64-bananapi-m64.dts @@ -191,7 +191,7 @@ compatible = "x-powers,axp803"; reg = <0x3a3>; interrupt-parent = <&r_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>; x-powers,drive-vbus-en; /* set N_VBUSEN as output pin */ }; }; diff --git a/dts/src/arm64/allwinner/sun50i-a64-nanopi-a64.dts b/dts/src/arm64/allwinner/sun50i-a64-nanopi-a64.dts index 09b3c7fb82..e47ff06a6f 100644 --- a/dts/src/arm64/allwinner/sun50i-a64-nanopi-a64.dts +++ b/dts/src/arm64/allwinner/sun50i-a64-nanopi-a64.dts @@ -152,7 +152,7 @@ compatible = "x-powers,axp803"; reg = <0x3a3>; interrupt-parent = <&r_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>; }; }; diff --git a/dts/src/arm64/allwinner/sun50i-a64-olinuxino.dts b/dts/src/arm64/allwinner/sun50i-a64-olinuxino.dts index f3f8e177ab..ec7e2c0e82 100644 --- a/dts/src/arm64/allwinner/sun50i-a64-olinuxino.dts +++ b/dts/src/arm64/allwinner/sun50i-a64-olinuxino.dts @@ -185,7 +185,7 @@ compatible = "x-powers,axp803"; reg = <0x3a3>; interrupt-parent = <&r_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>; x-powers,drive-vbus-en; /* set N_VBUSEN as output pin */ }; }; diff --git a/dts/src/arm64/allwinner/sun50i-a64-orangepi-win.dts b/dts/src/arm64/allwinner/sun50i-a64-orangepi-win.dts index 70e31743f0..097a551152 100644 --- a/dts/src/arm64/allwinner/sun50i-a64-orangepi-win.dts +++ b/dts/src/arm64/allwinner/sun50i-a64-orangepi-win.dts @@ -192,7 +192,7 @@ compatible = "x-powers,axp803"; reg = <0x3a3>; interrupt-parent = <&r_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>; x-powers,drive-vbus-en; /* set N_VBUSEN as output pin */ }; }; diff --git a/dts/src/arm64/allwinner/sun50i-a64-pine64.dts b/dts/src/arm64/allwinner/sun50i-a64-pine64.dts index 329cf27656..2accb5ddf7 100644 --- a/dts/src/arm64/allwinner/sun50i-a64-pine64.dts +++ b/dts/src/arm64/allwinner/sun50i-a64-pine64.dts @@ -139,7 +139,7 @@ compatible = "x-powers,axp803"; reg = <0x3a3>; interrupt-parent = <&r_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>; }; }; diff --git a/dts/src/arm64/allwinner/sun50i-a64-pinebook.dts b/dts/src/arm64/allwinner/sun50i-a64-pinebook.dts index 7ae16541d1..34e67f5f82 100644 --- a/dts/src/arm64/allwinner/sun50i-a64-pinebook.dts +++ b/dts/src/arm64/allwinner/sun50i-a64-pinebook.dts @@ -245,7 +245,7 @@ compatible = "x-powers,axp803"; reg = <0x3a3>; interrupt-parent = <&r_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>; }; }; diff --git a/dts/src/arm64/allwinner/sun50i-a64-pinephone.dtsi b/dts/src/arm64/allwinner/sun50i-a64-pinephone.dtsi index 9f69d489a8..79adea3f8c 100644 --- a/dts/src/arm64/allwinner/sun50i-a64-pinephone.dtsi +++ b/dts/src/arm64/allwinner/sun50i-a64-pinephone.dtsi @@ -296,7 +296,7 @@ compatible = "x-powers,axp803"; reg = <0x3a3>; interrupt-parent = <&r_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>; }; }; diff --git a/dts/src/arm64/allwinner/sun50i-a64-pinetab.dts b/dts/src/arm64/allwinner/sun50i-a64-pinetab.dts index 422a8507f6..7ef96f9ff7 100644 --- a/dts/src/arm64/allwinner/sun50i-a64-pinetab.dts +++ b/dts/src/arm64/allwinner/sun50i-a64-pinetab.dts @@ -266,7 +266,7 @@ compatible = "x-powers,axp803"; reg = <0x3a3>; interrupt-parent = <&r_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>; x-powers,drive-vbus-en; }; }; diff --git a/dts/src/arm64/allwinner/sun50i-a64-sopine.dtsi b/dts/src/arm64/allwinner/sun50i-a64-sopine.dtsi index df62044ff7..6d78a1c98f 100644 --- a/dts/src/arm64/allwinner/sun50i-a64-sopine.dtsi +++ b/dts/src/arm64/allwinner/sun50i-a64-sopine.dtsi @@ -45,7 +45,7 @@ compatible = "x-powers,axp803"; reg = <0x3a3>; interrupt-parent = <&r_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>; }; }; diff --git a/dts/src/arm64/allwinner/sun50i-a64-teres-i.dts b/dts/src/arm64/allwinner/sun50i-a64-teres-i.dts index f0a16f355e..45e1abdf70 100644 --- a/dts/src/arm64/allwinner/sun50i-a64-teres-i.dts +++ b/dts/src/arm64/allwinner/sun50i-a64-teres-i.dts @@ -205,7 +205,7 @@ compatible = "x-powers,axp803"; reg = <0x3a3>; interrupt-parent = <&r_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>; wakeup-source; }; }; diff --git a/dts/src/arm64/allwinner/sun50i-a64.dtsi b/dts/src/arm64/allwinner/sun50i-a64.dtsi index 57786fc120..5b30e6c1fa 100644 --- a/dts/src/arm64/allwinner/sun50i-a64.dtsi +++ b/dts/src/arm64/allwinner/sun50i-a64.dtsi @@ -648,6 +648,7 @@ pio: pinctrl@1c20800 { compatible = "allwinner,sun50i-a64-pinctrl"; reg = <0x01c20800 0x400>; + interrupt-parent = <&r_intc>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; @@ -818,6 +819,7 @@ compatible = "allwinner,sun50i-a64-lradc", "allwinner,sun8i-a83t-r-lradc"; reg = <0x01c21800 0x400>; + interrupt-parent = <&r_intc>; interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -1208,6 +1210,7 @@ compatible = "allwinner,sun50i-a64-rtc", "allwinner,sun8i-h3-rtc"; reg = <0x01f00000 0x400>; + interrupt-parent = <&r_intc>; interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; clock-output-names = "osc32k", "osc32k-out", "iosc"; @@ -1219,7 +1222,7 @@ compatible = "allwinner,sun50i-a64-r-intc", "allwinner,sun6i-a31-r-intc"; interrupt-controller; - #interrupt-cells = <2>; + #interrupt-cells = <3>; reg = <0x01f00c00 0x400>; interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; }; @@ -1279,6 +1282,7 @@ r_pio: pinctrl@1f02c00 { compatible = "allwinner,sun50i-a64-r-pinctrl"; reg = <0x01f02c00 0x400>; + interrupt-parent = <&r_intc>; interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; clocks = <&r_ccu CLK_APB0_PIO>, <&osc24M>, <&osc32k>; clock-names = "apb", "hosc", "losc"; diff --git a/dts/src/arm64/allwinner/sun50i-h6-beelink-gs1.dts b/dts/src/arm64/allwinner/sun50i-h6-beelink-gs1.dts index b5808047d6..6249e9e029 100644 --- a/dts/src/arm64/allwinner/sun50i-h6-beelink-gs1.dts +++ b/dts/src/arm64/allwinner/sun50i-h6-beelink-gs1.dts @@ -150,14 +150,30 @@ vcc-pg-supply = <®_aldo1>; }; -&r_i2c { +&r_ir { + linux,rc-map-name = "rc-beelink-gs1"; + status = "okay"; +}; + +&r_pio { + /* + * FIXME: We can't add that supply for now since it would + * create a circular dependency between pinctrl, the regulator + * and the RSB Bus. + * + * vcc-pl-supply = <®_aldo1>; + */ + vcc-pm-supply = <®_aldo1>; +}; + +&r_rsb { status = "okay"; - axp805: pmic@36 { + axp805: pmic@745 { compatible = "x-powers,axp805", "x-powers,axp806"; - reg = <0x36>; + reg = <0x745>; interrupt-parent = <&r_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <1>; x-powers,self-working-mode; @@ -273,22 +289,6 @@ }; }; -&r_ir { - linux,rc-map-name = "rc-beelink-gs1"; - status = "okay"; -}; - -&r_pio { - /* - * PL0 and PL1 are used for PMIC I2C - * don't enable the pl-supply else - * it will fail at boot - * - * vcc-pl-supply = <®_aldo1>; - */ - vcc-pm-supply = <®_aldo1>; -}; - &spdif { status = "okay"; }; diff --git a/dts/src/arm64/allwinner/sun50i-h6-orangepi-3.dts b/dts/src/arm64/allwinner/sun50i-h6-orangepi-3.dts index 7e83f6146f..c45d7b7fb3 100644 --- a/dts/src/arm64/allwinner/sun50i-h6-orangepi-3.dts +++ b/dts/src/arm64/allwinner/sun50i-h6-orangepi-3.dts @@ -175,14 +175,18 @@ vcc-pg-supply = <®_vcc_wifi_io>; }; -&r_i2c { +&r_ir { + status = "okay"; +}; + +&r_rsb { status = "okay"; - axp805: pmic@36 { + axp805: pmic@745 { compatible = "x-powers,axp805", "x-powers,axp806"; - reg = <0x36>; + reg = <0x745>; interrupt-parent = <&r_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <1>; x-powers,self-working-mode; @@ -291,10 +295,6 @@ }; }; -&r_ir { - status = "okay"; -}; - &rtc { clocks = <&ext_osc32k>; }; diff --git a/dts/src/arm64/allwinner/sun50i-h6-orangepi.dtsi b/dts/src/arm64/allwinner/sun50i-h6-orangepi.dtsi index da0875bd38..92745128fc 100644 --- a/dts/src/arm64/allwinner/sun50i-h6-orangepi.dtsi +++ b/dts/src/arm64/allwinner/sun50i-h6-orangepi.dtsi @@ -112,14 +112,22 @@ vcc-pg-supply = <®_aldo1>; }; -&r_i2c { +&r_ir { + status = "okay"; +}; + +&r_pio { + vcc-pm-supply = <®_bldo3>; +}; + +&r_rsb { status = "okay"; - axp805: pmic@36 { + axp805: pmic@745 { compatible = "x-powers,axp805", "x-powers,axp806"; - reg = <0x36>; + reg = <0x745>; interrupt-parent = <&r_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <1>; x-powers,self-working-mode; @@ -232,14 +240,6 @@ }; }; -&r_ir { - status = "okay"; -}; - -&r_pio { - vcc-pm-supply = <®_bldo3>; -}; - &rtc { clocks = <&ext_osc32k>; }; diff --git a/dts/src/arm64/allwinner/sun50i-h6-pine-h64.dts b/dts/src/arm64/allwinner/sun50i-h6-pine-h64.dts index b868ad17af..1ffd68f43f 100644 --- a/dts/src/arm64/allwinner/sun50i-h6-pine-h64.dts +++ b/dts/src/arm64/allwinner/sun50i-h6-pine-h64.dts @@ -168,7 +168,7 @@ compatible = "x-powers,axp805", "x-powers,axp806"; reg = <0x36>; interrupt-parent = <&r_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <1>; x-powers,self-working-mode; @@ -281,7 +281,7 @@ compatible = "nxp,pcf8563"; reg = <0x51>; interrupt-parent = <&r_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>; #clock-cells = <0>; }; }; diff --git a/dts/src/arm64/allwinner/sun50i-h6.dtsi b/dts/src/arm64/allwinner/sun50i-h6.dtsi index af8b7d0ef7..50815867ce 100644 --- a/dts/src/arm64/allwinner/sun50i-h6.dtsi +++ b/dts/src/arm64/allwinner/sun50i-h6.dtsi @@ -294,6 +294,7 @@ pio: pinctrl@300b000 { compatible = "allwinner,sun50i-h6-pinctrl"; reg = <0x0300b000 0x400>; + interrupt-parent = <&r_intc>; interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, @@ -902,6 +903,7 @@ rtc: rtc@7000000 { compatible = "allwinner,sun50i-h6-rtc"; reg = <0x07000000 0x400>; + interrupt-parent = <&r_intc>; interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; clock-output-names = "osc32k", "osc32k-out", "iosc"; @@ -927,10 +929,9 @@ }; r_intc: interrupt-controller@7021000 { - compatible = "allwinner,sun50i-h6-r-intc", - "allwinner,sun6i-a31-r-intc"; + compatible = "allwinner,sun50i-h6-r-intc"; interrupt-controller; - #interrupt-cells = <2>; + #interrupt-cells = <3>; reg = <0x07021000 0x400>; interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; }; @@ -938,6 +939,7 @@ r_pio: pinctrl@7022000 { compatible = "allwinner,sun50i-h6-r-pinctrl"; reg = <0x07022000 0x400>; + interrupt-parent = <&r_intc>; interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; clocks = <&r_ccu CLK_R_APB1>, <&osc24M>, <&rtc 0>; diff --git a/dts/src/arm64/amlogic/meson-a1.dtsi b/dts/src/arm64/amlogic/meson-a1.dtsi index 755b4ad151..b4000cf65a 100644 --- a/dts/src/arm64/amlogic/meson-a1.dtsi +++ b/dts/src/arm64/amlogic/meson-a1.dtsi @@ -88,13 +88,13 @@ #reset-cells = <1>; }; - periphs_pinctrl: pinctrl@0400 { + periphs_pinctrl: pinctrl@400 { compatible = "amlogic,meson-a1-periphs-pinctrl"; #address-cells = <2>; #size-cells = <2>; ranges; - gpio: bank@0400 { + gpio: bank@400 { reg = <0x0 0x0400 0x0 0x003c>, <0x0 0x0480 0x0 0x0118>; reg-names = "mux", "gpio"; diff --git a/dts/src/arm64/amlogic/meson-axg.dtsi b/dts/src/arm64/amlogic/meson-axg.dtsi index d945c84ab6..895c43c7af 100644 --- a/dts/src/arm64/amlogic/meson-axg.dtsi +++ b/dts/src/arm64/amlogic/meson-axg.dtsi @@ -1731,7 +1731,6 @@ interrupts = <GIC_SPI 150 IRQ_TYPE_EDGE_RISING>; clocks = <&clkc CLKID_VAPB>; resets = <&reset RESET_GE2D>; - reset-names = "core"; }; gic: interrupt-controller@ffc01000 { diff --git a/dts/src/arm64/amlogic/meson-g12-common.dtsi b/dts/src/arm64/amlogic/meson-g12-common.dtsi index b858c5e43c..793d48f723 100644 --- a/dts/src/arm64/amlogic/meson-g12-common.dtsi +++ b/dts/src/arm64/amlogic/meson-g12-common.dtsi @@ -17,6 +17,12 @@ #address-cells = <2>; #size-cells = <2>; + aliases { + mmc0 = &sd_emmc_b; /* SD card */ + mmc1 = &sd_emmc_c; /* eMMC */ + mmc2 = &sd_emmc_a; /* SDIO */ + }; + chosen { #address-cells = <2>; #size-cells = <2>; @@ -122,9 +128,9 @@ pcie: pcie@fc000000 { compatible = "amlogic,g12a-pcie", "snps,dw-pcie"; - reg = <0x0 0xfc000000 0x0 0x400000 - 0x0 0xff648000 0x0 0x2000 - 0x0 0xfc400000 0x0 0x200000>; + reg = <0x0 0xfc000000 0x0 0x400000>, + <0x0 0xff648000 0x0 0x2000>, + <0x0 0xfc400000 0x0 0x200000>; reg-names = "elbi", "cfg", "config"; interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; #interrupt-cells = <1>; @@ -134,8 +140,8 @@ #address-cells = <3>; #size-cells = <2>; device_type = "pci"; - ranges = <0x81000000 0 0 0x0 0xfc600000 0 0x00100000 - 0x82000000 0 0xfc700000 0x0 0xfc700000 0 0x1900000>; + ranges = <0x81000000 0 0 0x0 0xfc600000 0 0x00100000>, + <0x82000000 0 0xfc700000 0x0 0xfc700000 0 0x1900000>; clocks = <&clkc CLKID_PCIE_PHY &clkc CLKID_PCIE_COMB @@ -2003,7 +2009,7 @@ }; }; - vrtc: rtc@0a8 { + vrtc: rtc@a8 { compatible = "amlogic,meson-vrtc"; reg = <0x0 0x000a8 0x0 0x4>; }; @@ -2181,7 +2187,7 @@ amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>; }; - watchdog: wdt@f0d0 { + watchdog: watchdog@f0d0 { compatible = "amlogic,meson-gxbb-wdt"; reg = <0x0 0xf0d0 0x0 0x10>; clocks = <&xtal>; diff --git a/dts/src/arm64/amlogic/meson-g12b-gsking-x.dts b/dts/src/arm64/amlogic/meson-g12b-gsking-x.dts index 211191f663..6c7bfacbad 100644 --- a/dts/src/arm64/amlogic/meson-g12b-gsking-x.dts +++ b/dts/src/arm64/amlogic/meson-g12b-gsking-x.dts @@ -12,7 +12,7 @@ #include <dt-bindings/sound/meson-g12a-tohdmitx.h> / { - compatible = "azw,gsking-x", "amlogic,g12b"; + compatible = "azw,gsking-x", "amlogic,s922x", "amlogic,g12b"; model = "Beelink GS-King X"; aliases { diff --git a/dts/src/arm64/amlogic/meson-g12b-gtking-pro.dts b/dts/src/arm64/amlogic/meson-g12b-gtking-pro.dts index 0e331aa5a2..707daf9278 100644 --- a/dts/src/arm64/amlogic/meson-g12b-gtking-pro.dts +++ b/dts/src/arm64/amlogic/meson-g12b-gtking-pro.dts @@ -11,7 +11,7 @@ #include <dt-bindings/sound/meson-g12a-tohdmitx.h> / { - compatible = "azw,gtking", "amlogic,g12b"; + compatible = "azw,gtking", "amlogic,s922x", "amlogic,g12b"; model = "Beelink GT-King Pro"; aliases { @@ -35,7 +35,7 @@ leds { compatible = "gpio-leds"; - white { + led-white { label = "power:white"; gpios = <&gpio_ao GPIOAO_11 GPIO_ACTIVE_HIGH>; default-state = "on"; diff --git a/dts/src/arm64/amlogic/meson-g12b-gtking.dts b/dts/src/arm64/amlogic/meson-g12b-gtking.dts index a7db84a500..5d96c14490 100644 --- a/dts/src/arm64/amlogic/meson-g12b-gtking.dts +++ b/dts/src/arm64/amlogic/meson-g12b-gtking.dts @@ -11,7 +11,7 @@ #include <dt-bindings/sound/meson-g12a-tohdmitx.h> / { - compatible = "azw,gtking", "amlogic,g12b"; + compatible = "azw,gtking", "amlogic,s922x", "amlogic,g12b"; model = "Beelink GT-King"; aliases { diff --git a/dts/src/arm64/amlogic/meson-g12b-odroid-n2.dtsi b/dts/src/arm64/amlogic/meson-g12b-odroid-n2.dtsi index 58ce569b2a..344573e157 100644 --- a/dts/src/arm64/amlogic/meson-g12b-odroid-n2.dtsi +++ b/dts/src/arm64/amlogic/meson-g12b-odroid-n2.dtsi @@ -42,7 +42,7 @@ leds { compatible = "gpio-leds"; - blue { + led-blue { label = "n2:blue"; gpios = <&gpio_ao GPIOAO_11 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; @@ -410,7 +410,7 @@ &ext_mdio { external_phy: ethernet-phy@0 { - /* Realtek RTL8211F (0x001cc916) */ + /* Realtek RTL8211F (0x001cc916) */ reg = <0>; max-speed = <1000>; @@ -446,13 +446,58 @@ }; &gpio { + gpio-line-names = + /* GPIOZ */ + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + /* GPIOH */ + "", "", "", "", "", "", "", "", + "", + /* BOOT */ + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + /* GPIOC */ + "", "", "", "", "", "", "", "", + /* GPIOA */ + "PIN_44", /* GPIOA_0 */ + "PIN_46", /* GPIOA_1 */ + "PIN_45", /* GPIOA_2 */ + "PIN_47", /* GPIOA_3 */ + "PIN_26", /* GPIOA_4 */ + "", "", "", "", "", "", + "PIN_42", /* GPIOA_11 */ + "PIN_32", /* GPIOA_12 */ + "PIN_7", /* GPIOA_13 */ + "PIN_27", /* GPIOA_14 */ + "PIN_28", /* GPIOA_15 */ + /* GPIOX */ + "PIN_16", /* GPIOX_0 */ + "PIN_18", /* GPIOX_1 */ + "PIN_22", /* GPIOX_2 */ + "PIN_11", /* GPIOX_3 */ + "PIN_13", /* GPIOX_4 */ + "PIN_33", /* GPIOX_5 */ + "PIN_35", /* GPIOX_6 */ + "PIN_15", /* GPIOX_7 */ + "PIN_19", /* GPIOX_8 */ + "PIN_21", /* GPIOX_9 */ + "PIN_24", /* GPIOX_10 */ + "PIN_23", /* GPIOX_11 */ + "PIN_8", /* GPIOX_12 */ + "PIN_10", /* GPIOX_13 */ + "PIN_29", /* GPIOX_14 */ + "PIN_31", /* GPIOX_15 */ + "PIN_12", /* GPIOX_16 */ + "PIN_3", /* GPIOX_17 */ + "PIN_5", /* GPIOX_18 */ + "PIN_36"; /* GPIOX_19 */ /* * WARNING: The USB Hub on the Odroid-N2 needs a reset signal * to be turned high in order to be detected by the USB Controller * This signal should be handled by a USB specific power sequence * in order to reset the Hub when USB bus is powered down. */ - usb-hub { + hog-0 { gpio-hog; gpios = <GPIOH_4 GPIO_ACTIVE_HIGH>; output-high; @@ -508,6 +553,11 @@ status = "okay"; }; +&saradc { + status = "okay"; + vref-supply = <&vddao_1v8>; +}; + /* SD card */ &sd_emmc_b { status = "okay"; diff --git a/dts/src/arm64/amlogic/meson-gx.dtsi b/dts/src/arm64/amlogic/meson-gx.dtsi index 0edd137151..3d00404aae 100644 --- a/dts/src/arm64/amlogic/meson-gx.dtsi +++ b/dts/src/arm64/amlogic/meson-gx.dtsi @@ -20,6 +20,12 @@ #address-cells = <2>; #size-cells = <2>; + aliases { + mmc0 = &sd_emmc_b; /* SD card */ + mmc1 = &sd_emmc_c; /* eMMC */ + mmc2 = &sd_emmc_a; /* SDIO */ + }; + reserved-memory { #address-cells = <2>; #size-cells = <2>; diff --git a/dts/src/arm64/amlogic/meson-gxbb-odroidc2.dts b/dts/src/arm64/amlogic/meson-gxbb-odroidc2.dts index bfaf7f41a2..201596247f 100644 --- a/dts/src/arm64/amlogic/meson-gxbb-odroidc2.dts +++ b/dts/src/arm64/amlogic/meson-gxbb-odroidc2.dts @@ -257,7 +257,7 @@ * This signal should be handled by a USB specific power sequence * in order to reset the Hub when USB bus is powered down. */ - usb-hub { + hog-0 { gpio-hog; gpios = <GPIOAO_4 GPIO_ACTIVE_HIGH>; output-high; diff --git a/dts/src/arm64/amlogic/meson-gxl-s905d-mecool-kii-pro.dts b/dts/src/arm64/amlogic/meson-gxl-s905d-mecool-kii-pro.dts new file mode 100644 index 0000000000..c529b6c860 --- /dev/null +++ b/dts/src/arm64/amlogic/meson-gxl-s905d-mecool-kii-pro.dts @@ -0,0 +1,86 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/* + * Author: Christian Hewitt <christianshewitt@gmail.com> + */ + +/dts-v1/; + +#include "meson-gxl-s905d.dtsi" +#include "meson-gx-p23x-q20x.dtsi" +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> + +/ { + compatible = "videostrong,gxl-kii-pro", "amlogic,s905d", "amlogic,meson-gxl"; + model = "MeCool KII Pro"; + + adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 0>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1710000>; + + button-function { + label = "Update"; + linux,code = <KEY_VENDOR>; + press-threshold-microvolt = <10000>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; + + button@0 { + label = "power"; + linux,code = <KEY_POWER>; + gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-blue { + color = <LED_COLOR_ID_BLUE>; + function = LED_FUNCTION_POWER; + gpios = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>; + default-state = "on"; + panic-indicator; + }; + }; +}; + +ðmac { + phy-mode = "rmii"; + phy-handle = <&internal_phy>; +}; + +&ir { + linux,rc-map-name = "rc-mecool-kii-pro"; +}; + +&sd_emmc_a { + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; +}; + +&uart_A { + status = "okay"; + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; + pinctrl-names = "default"; + uart-has-rtscts; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; + max-speed = <2000000>; + clocks = <&wifi32k>; + clock-names = "lpo"; + }; +}; diff --git a/dts/src/arm64/amlogic/meson-gxl-s905d-sml5442tw.dts b/dts/src/arm64/amlogic/meson-gxl-s905d-sml5442tw.dts index ad6d722541..b331a01357 100644 --- a/dts/src/arm64/amlogic/meson-gxl-s905d-sml5442tw.dts +++ b/dts/src/arm64/amlogic/meson-gxl-s905d-sml5442tw.dts @@ -16,28 +16,28 @@ leds { compatible = "gpio-leds"; - yellow { + led-yellow { color = <LED_COLOR_ID_YELLOW>; function = LED_FUNCTION_STATUS; gpios = <&gpio_ao GPIOAO_6 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - blue { + led-blue { color = <LED_COLOR_ID_BLUE>; function = LED_FUNCTION_STATUS; gpios = <&gpio GPIODV_28 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - green { + led-green { color = <LED_COLOR_ID_GREEN>; function = LED_FUNCTION_STATUS; gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>; default-state = "on"; }; - red { + led-red { color = <LED_COLOR_ID_RED>; function = LED_FUNCTION_STATUS; gpios = <&gpio GPIODV_27 GPIO_ACTIVE_HIGH>; diff --git a/dts/src/arm64/amlogic/meson-gxm-mecool-kiii-pro.dts b/dts/src/arm64/amlogic/meson-gxm-mecool-kiii-pro.dts new file mode 100644 index 0000000000..ebebf344b7 --- /dev/null +++ b/dts/src/arm64/amlogic/meson-gxm-mecool-kiii-pro.dts @@ -0,0 +1,113 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/* + * Author: Christian Hewitt <christianshewitt@gmail.com> + */ + +/dts-v1/; + +#include "meson-gxm.dtsi" +#include "meson-gx-p23x-q20x.dtsi" +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> + +/ { + compatible = "videostrong,gxm-kiii-pro", "amlogic,s912", "amlogic,meson-gxm"; + model = "MeCool KIII Pro"; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0xC0000000>; + }; + + adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 0>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1710000>; + + button-function { + label = "Update"; + linux,code = <KEY_VENDOR>; + press-threshold-microvolt = <10000>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; + + button@0 { + label = "power"; + linux,code = <KEY_POWER>; + gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-blue { + color = <LED_COLOR_ID_BLUE>; + function = LED_FUNCTION_POWER; + gpios = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>; + default-state = "on"; + panic-indicator; + }; + }; +}; + +ðmac { + pinctrl-0 = <ð_pins>; + pinctrl-names = "default"; + + phy-handle = <&external_phy>; + + amlogic,tx-delay-ns = <2>; + + phy-mode = "rgmii"; +}; + +&external_mdio { + external_phy: ethernet-phy@0 { + /* Realtek RTL8211F (0x001cc916) */ + reg = <0>; + max-speed = <1000>; + + reset-assert-us = <10000>; + reset-deassert-us = <80000>; + reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>; + + interrupt-parent = <&gpio_intc>; + /* MAC_INTR on GPIOZ_15 */ + interrupts = <25 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&ir { + linux,rc-map-name = "rc-mecool-kiii-pro"; +}; + +&sd_emmc_a { + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; +}; + +&uart_A { + status = "okay"; + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; + pinctrl-names = "default"; + uart-has-rtscts; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; + max-speed = <2000000>; + clocks = <&wifi32k>; + clock-names = "lpo"; + }; +}; diff --git a/dts/src/arm64/amlogic/meson-gxm-minix-neo-u9h.dts b/dts/src/arm64/amlogic/meson-gxm-minix-neo-u9h.dts new file mode 100644 index 0000000000..ea9f234d1f --- /dev/null +++ b/dts/src/arm64/amlogic/meson-gxm-minix-neo-u9h.dts @@ -0,0 +1,120 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) Christian Hewitt <christianshewitt@gmail.com> + */ + +/dts-v1/; + +#include "meson-gxm.dtsi" +#include "meson-gx-p23x-q20x.dtsi" +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> + +/ { + compatible = "minix,neo-u9h", "amlogic,s912", "amlogic,meson-gxm"; + model = "Minix Neo U9-H"; + + leds { + compatible = "gpio-leds"; + + led-white { + color = <LED_COLOR_ID_WHITE>; + function = LED_FUNCTION_POWER; + gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>; + default-state = "on"; + panic-indicator; + }; + }; + + adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 0>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1710000>; + + button-function { + label = "update"; + linux,code = <KEY_VENDOR>; + press-threshold-microvolt = <10000>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; + + button@0 { + label = "power"; + linux,code = <KEY_POWER>; + gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>; + }; + }; +}; + +ðmac { + pinctrl-0 = <ð_pins>; + pinctrl-names = "default"; + phy-handle = <&external_phy>; + amlogic,tx-delay-ns = <2>; + phy-mode = "rgmii"; +}; + +&external_mdio { + external_phy: ethernet-phy@0 { + /* Realtek RTL8211F (0x001cc916) */ + reg = <0>; + max-speed = <1000>; + + reset-assert-us = <10000>; + reset-deassert-us = <80000>; + reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>; + + interrupt-parent = <&gpio_intc>; + /* MAC_INTR on GPIOZ_15 */ + interrupts = <25 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&ir { + linux,rc-map-name = "rc-minix-neo"; +}; + +&i2c_B { + status = "okay"; + pinctrl-0 = <&i2c_b_pins>; + pinctrl-names = "default"; + + rtc: rtc@51 { + status = "okay"; + compatible = "haoyu,hym8563"; + reg = <0x51>; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "xin32k"; + wakeup-source; + }; +}; + +&sd_emmc_a { + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; +}; + +&uart_A { + status = "okay"; + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; + pinctrl-names = "default"; + uart-has-rtscts; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; + max-speed = <2000000>; + clocks = <&wifi32k>; + clock-names = "lpo"; + }; +}; diff --git a/dts/src/arm64/amlogic/meson-gxm-wetek-core2.dts b/dts/src/arm64/amlogic/meson-gxm-wetek-core2.dts index ec794c134c..1e7f77f9b5 100644 --- a/dts/src/arm64/amlogic/meson-gxm-wetek-core2.dts +++ b/dts/src/arm64/amlogic/meson-gxm-wetek-core2.dts @@ -22,7 +22,7 @@ leds { compatible = "gpio-leds"; - blue { + led-blue { color = <LED_COLOR_ID_BLUE>; function = LED_FUNCTION_STATUS; gpios = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>; diff --git a/dts/src/arm64/amlogic/meson-khadas-vim3.dtsi b/dts/src/arm64/amlogic/meson-khadas-vim3.dtsi index 877e3b9892..66d67524b0 100644 --- a/dts/src/arm64/amlogic/meson-khadas-vim3.dtsi +++ b/dts/src/arm64/amlogic/meson-khadas-vim3.dtsi @@ -43,14 +43,14 @@ leds { compatible = "gpio-leds"; - white { + led-white { color = <LED_COLOR_ID_WHITE>; function = LED_FUNCTION_STATUS; gpios = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; - red { + led-red { color = <LED_COLOR_ID_RED>; function = LED_FUNCTION_STATUS; gpios = <&gpio_expander 5 GPIO_ACTIVE_HIGH>; diff --git a/dts/src/arm64/amlogic/meson-sm1-odroid-c4.dts b/dts/src/arm64/amlogic/meson-sm1-odroid-c4.dts index b2a4e823c1..8c327c03d8 100644 --- a/dts/src/arm64/amlogic/meson-sm1-odroid-c4.dts +++ b/dts/src/arm64/amlogic/meson-sm1-odroid-c4.dts @@ -47,7 +47,7 @@ * This signal should be handled by a USB specific power sequence * in order to reset the Hub when USB bus is powered down. */ - usb-hub { + hog-0 { gpio-hog; gpios = <GPIOH_4 GPIO_ACTIVE_HIGH>; output-high; diff --git a/dts/src/arm64/apple/t8103-j274.dts b/dts/src/arm64/apple/t8103-j274.dts new file mode 100644 index 0000000000..e0f6775b98 --- /dev/null +++ b/dts/src/arm64/apple/t8103-j274.dts @@ -0,0 +1,45 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Apple Mac mini (M1, 2020) + * + * target-type: J274 + * + * Copyright The Asahi Linux Contributors + */ + +/dts-v1/; + +#include "t8103.dtsi" + +/ { + compatible = "apple,j274", "apple,t8103", "apple,arm-platform"; + model = "Apple Mac mini (M1, 2020)"; + + aliases { + serial0 = &serial0; + }; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + stdout-path = "serial0"; + + framebuffer0: framebuffer@0 { + compatible = "apple,simple-framebuffer", "simple-framebuffer"; + reg = <0 0 0 0>; /* To be filled by loader */ + /* Format properties will be added by loader */ + status = "disabled"; + }; + }; + + memory@800000000 { + device_type = "memory"; + reg = <0x8 0 0x2 0>; /* To be filled by loader */ + }; +}; + +&serial0 { + status = "okay"; +}; diff --git a/dts/src/arm64/apple/t8103.dtsi b/dts/src/arm64/apple/t8103.dtsi new file mode 100644 index 0000000000..a1e22a2ea2 --- /dev/null +++ b/dts/src/arm64/apple/t8103.dtsi @@ -0,0 +1,135 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Apple T8103 "M1" SoC + * + * Other names: H13G, "Tonga" + * + * Copyright The Asahi Linux Contributors + */ + +#include <dt-bindings/interrupt-controller/apple-aic.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + compatible = "apple,t8103", "apple,arm-platform"; + + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu0: cpu@0 { + compatible = "apple,icestorm"; + device_type = "cpu"; + reg = <0x0 0x0>; + enable-method = "spin-table"; + cpu-release-addr = <0 0>; /* To be filled by loader */ + }; + + cpu1: cpu@1 { + compatible = "apple,icestorm"; + device_type = "cpu"; + reg = <0x0 0x1>; + enable-method = "spin-table"; + cpu-release-addr = <0 0>; /* To be filled by loader */ + }; + + cpu2: cpu@2 { + compatible = "apple,icestorm"; + device_type = "cpu"; + reg = <0x0 0x2>; + enable-method = "spin-table"; + cpu-release-addr = <0 0>; /* To be filled by loader */ + }; + + cpu3: cpu@3 { + compatible = "apple,icestorm"; + device_type = "cpu"; + reg = <0x0 0x3>; + enable-method = "spin-table"; + cpu-release-addr = <0 0>; /* To be filled by loader */ + }; + + cpu4: cpu@10100 { + compatible = "apple,firestorm"; + device_type = "cpu"; + reg = <0x0 0x10100>; + enable-method = "spin-table"; + cpu-release-addr = <0 0>; /* To be filled by loader */ + }; + + cpu5: cpu@10101 { + compatible = "apple,firestorm"; + device_type = "cpu"; + reg = <0x0 0x10101>; + enable-method = "spin-table"; + cpu-release-addr = <0 0>; /* To be filled by loader */ + }; + + cpu6: cpu@10102 { + compatible = "apple,firestorm"; + device_type = "cpu"; + reg = <0x0 0x10102>; + enable-method = "spin-table"; + cpu-release-addr = <0 0>; /* To be filled by loader */ + }; + + cpu7: cpu@10103 { + compatible = "apple,firestorm"; + device_type = "cpu"; + reg = <0x0 0x10103>; + enable-method = "spin-table"; + cpu-release-addr = <0 0>; /* To be filled by loader */ + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupt-parent = <&aic>; + interrupt-names = "phys", "virt", "hyp-phys", "hyp-virt"; + interrupts = <AIC_FIQ AIC_TMR_GUEST_PHYS IRQ_TYPE_LEVEL_HIGH>, + <AIC_FIQ AIC_TMR_GUEST_VIRT IRQ_TYPE_LEVEL_HIGH>, + <AIC_FIQ AIC_TMR_HV_PHYS IRQ_TYPE_LEVEL_HIGH>, + <AIC_FIQ AIC_TMR_HV_VIRT IRQ_TYPE_LEVEL_HIGH>; + }; + + clk24: clock-24m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + clock-output-names = "clk24"; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + + ranges; + nonposted-mmio; + + serial0: serial@235200000 { + compatible = "apple,s5l-uart"; + reg = <0x2 0x35200000 0x0 0x1000>; + reg-io-width = <4>; + interrupt-parent = <&aic>; + interrupts = <AIC_IRQ 605 IRQ_TYPE_LEVEL_HIGH>; + /* + * TODO: figure out the clocking properly, there may + * be a third selectable clock. + */ + clocks = <&clk24>, <&clk24>; + clock-names = "uart", "clk_uart_baud0"; + status = "disabled"; + }; + + aic: interrupt-controller@23b100000 { + compatible = "apple,t8103-aic", "apple,aic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x2 0x3b100000 0x0 0x8000>; + }; + }; +}; diff --git a/dts/src/arm64/arm/juno-base.dtsi b/dts/src/arm64/arm/juno-base.dtsi index f6c55877fb..1cc7fdcec5 100644 --- a/dts/src/arm64/arm/juno-base.dtsi +++ b/dts/src/arm64/arm/juno-base.dtsi @@ -544,6 +544,10 @@ ranges = <0x01000000 0x00 0x00000000 0x00 0x5f800000 0x0 0x00800000>, <0x02000000 0x00 0x50000000 0x00 0x50000000 0x0 0x08000000>, <0x42000000 0x40 0x00000000 0x40 0x00000000 0x1 0x00000000>; + /* Standard AXI Translation entries as programmed by EDK2 */ + dma-ranges = <0x02000000 0x0 0x2c1c0000 0x0 0x2c1c0000 0x0 0x00040000>, + <0x02000000 0x0 0x80000000 0x0 0x80000000 0x0 0x80000000>, + <0x43000000 0x8 0x00000000 0x8 0x00000000 0x2 0x00000000>; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 7>; interrupt-map = <0 0 0 1 &gic 0 GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, @@ -640,7 +644,6 @@ #iommu-cells = <1>; #global-interrupts = <1>; dma-coherent; - status = "disabled"; }; smmu_hdlcd1: iommu@7fb10000 { diff --git a/dts/src/arm64/arm/juno-r1.dts b/dts/src/arm64/arm/juno-r1.dts index 5f290090b0..0e24e29eb9 100644 --- a/dts/src/arm64/arm/juno-r1.dts +++ b/dts/src/arm64/arm/juno-r1.dts @@ -230,6 +230,10 @@ status = "okay"; }; +&smmu_pcie { + status = "okay"; +}; + &etm0 { cpu = <&A57_0>; }; diff --git a/dts/src/arm64/arm/juno-r2.dts b/dts/src/arm64/arm/juno-r2.dts index 305300dd52..e609420ce3 100644 --- a/dts/src/arm64/arm/juno-r2.dts +++ b/dts/src/arm64/arm/juno-r2.dts @@ -236,6 +236,10 @@ status = "okay"; }; +&smmu_pcie { + status = "okay"; +}; + &etm0 { cpu = <&A72_0>; }; diff --git a/dts/src/arm64/broadcom/bcm4908/bcm4906-netgear-r8000p.dts b/dts/src/arm64/broadcom/bcm4908/bcm4906-netgear-r8000p.dts index ee3ed61227..2dd028438c 100644 --- a/dts/src/arm64/broadcom/bcm4908/bcm4906-netgear-r8000p.dts +++ b/dts/src/arm64/broadcom/bcm4908/bcm4906-netgear-r8000p.dts @@ -18,11 +18,106 @@ leds { compatible = "gpio-leds"; - wps { + led-power-white { + function = LED_FUNCTION_POWER; + color = <LED_COLOR_ID_WHITE>; + gpios = <&gpio0 8 GPIO_ACTIVE_LOW>; + }; + + led-power-amber { + function = LED_FUNCTION_POWER; + color = <LED_COLOR_ID_AMBER>; + gpios = <&gpio0 9 GPIO_ACTIVE_LOW>; + }; + + led-wps { function = LED_FUNCTION_WPS; color = <LED_COLOR_ID_WHITE>; gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; }; + + led-2ghz { + function = "2ghz"; + color = <LED_COLOR_ID_WHITE>; + gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; + }; + + led-5ghz-1 { + function = "5ghz-1"; + color = <LED_COLOR_ID_WHITE>; + gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; + }; + + led-5ghz-2 { + function = "5ghz-2"; + color = <LED_COLOR_ID_WHITE>; + gpios = <&gpio0 16 GPIO_ACTIVE_LOW>; + }; + + led-usb2 { + function = "usb2"; + color = <LED_COLOR_ID_WHITE>; + gpios = <&gpio0 17 GPIO_ACTIVE_LOW>; + }; + + led-usb3 { + function = "usb3"; + color = <LED_COLOR_ID_WHITE>; + gpios = <&gpio0 18 GPIO_ACTIVE_LOW>; + }; + + led-wifi { + function = "wifi"; + color = <LED_COLOR_ID_WHITE>; + gpios = <&gpio0 56 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&enet { + nvmem-cells = <&base_mac_addr>; + nvmem-cell-names = "mac-address"; +}; + +&usb_phy { + brcm,ioc = <1>; + status = "okay"; +}; + +&ehci { + status = "okay"; +}; + +&ohci { + status = "okay"; +}; + +&xhci { + status = "okay"; +}; + +&ports { + port@0 { + label = "lan4"; + }; + + port@1 { + label = "lan3"; + }; + + port@2 { + label = "lan2"; + }; + + port@3 { + label = "lan1"; + }; + + port@7 { + reg = <7>; + phy-mode = "internal"; + phy-handle = <&phy12>; + label = "wan"; }; }; @@ -40,11 +135,21 @@ #size-cells = <1>; partition@0 { + compatible = "nvmem-cells"; label = "cferom"; reg = <0x0 0x100000>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x0 0x100000>; + + base_mac_addr: mac@106a0 { + reg = <0x106a0 0x6>; + }; }; partition@100000 { + compatible = "brcm,bcm4908-firmware"; label = "firmware"; reg = <0x100000 0x4400000>; }; diff --git a/dts/src/arm64/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts b/dts/src/arm64/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts new file mode 100644 index 0000000000..b63eefab48 --- /dev/null +++ b/dts/src/arm64/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts @@ -0,0 +1,182 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> + +#include "bcm4906.dtsi" + +/ { + compatible = "tplink,archer-c2300-v1", "brcm,bcm4906", "brcm,bcm4908"; + model = "TP-Link Archer C2300 V1"; + + memory@0 { + device_type = "memory"; + reg = <0x00 0x00 0x00 0x20000000>; + }; + + leds { + compatible = "gpio-leds"; + + led-power { + function = LED_FUNCTION_POWER; + color = <LED_COLOR_ID_BLUE>; + gpios = <&gpio0 0 GPIO_ACTIVE_LOW>; + }; + + led-2ghz { + function = "2ghz"; + color = <LED_COLOR_ID_BLUE>; + gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; + }; + + led-5ghz { + function = "5ghz"; + color = <LED_COLOR_ID_BLUE>; + gpios = <&gpio0 3 GPIO_ACTIVE_LOW>; + }; + + led-wan-amber { + function = LED_FUNCTION_WAN; + color = <LED_COLOR_ID_AMBER>; + gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>; + }; + + led-wan-blue { + function = LED_FUNCTION_WAN; + color = <LED_COLOR_ID_BLUE>; + gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; + }; + + led-lan { + function = LED_FUNCTION_LAN; + color = <LED_COLOR_ID_BLUE>; + gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; + }; + + led-wps { + function = LED_FUNCTION_WPS; + color = <LED_COLOR_ID_BLUE>; + gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; + }; + + led-usb2 { + function = "usb2"; + color = <LED_COLOR_ID_BLUE>; + gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; + }; + + led-usb3 { + function = "usbd3"; + color = <LED_COLOR_ID_BLUE>; + gpios = <&gpio0 17 GPIO_ACTIVE_LOW>; + }; + + led-brightness { + function = LED_FUNCTION_BACKLIGHT; + color = <LED_COLOR_ID_WHITE>; + gpios = <&gpio0 19 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + poll-interval = <100>; + + brightness { + label = "LEDs"; + linux,code = <KEY_BRIGHTNESS_ZERO>; + gpios = <&gpio0 18 GPIO_ACTIVE_LOW>; + }; + + wps { + label = "WPS"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&gpio0 21 GPIO_ACTIVE_LOW>; + }; + + wifi { + label = "WiFi"; + linux,code = <KEY_RFKILL>; + gpios = <&gpio0 22 GPIO_ACTIVE_LOW>; + }; + + restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&gpio0 23 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&usb_phy { + brcm,ioc = <1>; + status = "okay"; +}; + +&ehci { + status = "okay"; +}; + +&ohci { + status = "okay"; +}; + +&xhci { + status = "okay"; +}; + +&ports { + port@0 { + label = "lan4"; + }; + + port@1 { + label = "lan3"; + }; + + port@2 { + label = "lan2"; + }; + + port@3 { + label = "lan1"; + }; + + port@7 { + reg = <7>; + phy-mode = "internal"; + phy-handle = <&phy12>; + label = "wan"; + }; +}; + +&nandcs { + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + nand-on-flash-bbt; + + #address-cells = <1>; + #size-cells = <0>; + + partitions { + compatible = "brcm,bcm4908-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "cferom"; + reg = <0x0 0x100000>; + }; + + partition@100000 { + compatible = "brcm,bcm4908-firmware"; + reg = <0x100000 0x3900000>; + }; + + partition@5800000 { + compatible = "brcm,bcm4908-firmware"; + reg = <0x3a00000 0x3900000>; + }; + }; +}; diff --git a/dts/src/arm64/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts b/dts/src/arm64/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts index 6e4ad66ff5..169fbb7cfd 100644 --- a/dts/src/arm64/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts +++ b/dts/src/arm64/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts @@ -44,6 +44,28 @@ }; }; +&enet { + nvmem-cells = <&base_mac_addr>; + nvmem-cell-names = "mac-address"; +}; + +&usb_phy { + brcm,ioc = <1>; + status = "okay"; +}; + +&ehci { + status = "okay"; +}; + +&ohci { + status = "okay"; +}; + +&xhci { + status = "okay"; +}; + &ports { port@0 { label = "lan2"; @@ -65,6 +87,7 @@ port@7 { label = "sw"; reg = <7>; + phy-mode = "rgmii"; fixed-link { speed = <1000>; @@ -105,13 +128,32 @@ #size-cells = <0>; partitions { - compatible = "fixed-partitions"; + compatible = "brcm,bcm4908-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { + compatible = "nvmem-cells"; label = "cferom"; reg = <0x0 0x100000>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x0 0x100000>; + + base_mac_addr: mac@106a0 { + reg = <0x106a0 0x6>; + }; + }; + + partition@100000 { + compatible = "brcm,bcm4908-firmware"; + reg = <0x100000 0x5700000>; + }; + + partition@5800000 { + compatible = "brcm,bcm4908-firmware"; + reg = <0x5800000 0x5700000>; }; }; }; diff --git a/dts/src/arm64/broadcom/bcm4908/bcm4908.dtsi b/dts/src/arm64/broadcom/bcm4908/bcm4908.dtsi index 9354077f74..8060178b36 100644 --- a/dts/src/arm64/broadcom/bcm4908/bcm4908.dtsi +++ b/dts/src/arm64/broadcom/bcm4908/bcm4908.dtsi @@ -2,6 +2,8 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/phy/phy.h> +#include <dt-bindings/soc/bcm-pmb.h> /dts-v1/; @@ -110,28 +112,52 @@ #size-cells = <1>; ranges = <0x00 0x00 0x80000000 0x281000>; - usb@c300 { + enet: ethernet@2000 { + compatible = "brcm,bcm4908-enet"; + reg = <0x2000 0x1000>; + + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "rx", "tx"; + }; + + usb_phy: usb-phy@c200 { + compatible = "brcm,bcm4908-usb-phy"; + reg = <0xc200 0x100>; + reg-names = "ctrl"; + power-domains = <&pmb BCM_PMB_HOST_USB>; + dr_mode = "host"; + brcm,has-xhci; + brcm,has-eohci; + #phy-cells = <1>; + status = "disabled"; + }; + + ehci: usb@c300 { compatible = "generic-ehci"; reg = <0xc300 0x100>; interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + phys = <&usb_phy PHY_TYPE_USB2>; status = "disabled"; }; - usb@c400 { + ohci: usb@c400 { compatible = "generic-ohci"; reg = <0xc400 0x100>; interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + phys = <&usb_phy PHY_TYPE_USB2>; status = "disabled"; }; - usb@d000 { + xhci: usb@d000 { compatible = "generic-xhci"; reg = <0xd000 0x8c8>; interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + phys = <&usb_phy PHY_TYPE_USB3>; status = "disabled"; }; - ethernet-switch@80000 { + bus@80000 { compatible = "simple-bus"; #size-cells = <1>; #address-cells = <1>; @@ -182,6 +208,17 @@ phy-mode = "internal"; phy-handle = <&phy11>; }; + + port@8 { + reg = <8>; + phy-mode = "internal"; + ethernet = <&enet>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; }; }; @@ -222,7 +259,7 @@ #address-cells = <1>; #size-cells = <1>; - power-controller@2800c0 { + pmb: power-controller@2800c0 { compatible = "brcm,bcm4908-pmb"; reg = <0x2800c0 0x40>; #power-domain-cells = <1>; diff --git a/dts/src/arm64/exynos/exynos5433-tm2-common.dtsi b/dts/src/arm64/exynos/exynos5433-tm2-common.dtsi index 413cac63a1..773d9abe3a 100644 --- a/dts/src/arm64/exynos/exynos5433-tm2-common.dtsi +++ b/dts/src/arm64/exynos/exynos5433-tm2-common.dtsi @@ -1002,7 +1002,7 @@ ppmu_event0_d1_general: ppmu-event0-d1-general { event-name = "ppmu-event0-d1-general"; }; - }; + }; }; &pinctrl_alive { diff --git a/dts/src/arm64/exynos/exynos5433.dtsi b/dts/src/arm64/exynos/exynos5433.dtsi index 6433f9ee35..18a912eee3 100644 --- a/dts/src/arm64/exynos/exynos5433.dtsi +++ b/dts/src/arm64/exynos/exynos5433.dtsi @@ -564,9 +564,9 @@ compatible = "samsung,exynos5433-slim-sss"; reg = <0x11140000 0x1000>; interrupts = <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "aclk", "pclk"; - clocks = <&cmu_imem CLK_ACLK_SLIMSSS>, - <&cmu_imem CLK_PCLK_SLIMSSS>; + clock-names = "pclk", "aclk"; + clocks = <&cmu_imem CLK_PCLK_SLIMSSS>, + <&cmu_imem CLK_ACLK_SLIMSSS>; }; pd_gscl: power-domain@105c4000 { diff --git a/dts/src/arm64/freescale/fsl-ls1028a-kontron-sl28.dts b/dts/src/arm64/freescale/fsl-ls1028a-kontron-sl28.dts index 0516076087..a92ecb331c 100644 --- a/dts/src/arm64/freescale/fsl-ls1028a-kontron-sl28.dts +++ b/dts/src/arm64/freescale/fsl-ls1028a-kontron-sl28.dts @@ -25,6 +25,8 @@ spi1 = &dspi2; mmc0 = &esdhc1; mmc1 = &esdhc; + rtc0 = &rtc; + rtc1 = &ftm_alarm0; }; buttons0 { @@ -115,8 +117,6 @@ status = "okay"; flash@0 { - #address-cells = <1>; - #size-cells = <1>; compatible = "jedec,spi-nor"; m25p,fast-read; spi-max-frequency = <133000000>; @@ -125,49 +125,37 @@ spi-rx-bus-width = <2>; /* 2 SPI Rx lines */ spi-tx-bus-width = <1>; /* 1 SPI Tx line */ - partition@0 { - reg = <0x000000 0x010000>; - label = "rcw"; - read-only; - }; - - partition@10000 { - reg = <0x010000 0x0f0000>; - label = "failsafe bootloader"; - read-only; - }; - - partition@100000 { - reg = <0x100000 0x040000>; - label = "failsafe DP firmware"; - read-only; - }; - - partition@140000 { - reg = <0x140000 0x0a0000>; - label = "failsafe trusted firmware"; - read-only; - }; - - partition@1e0000 { - reg = <0x1e0000 0x020000>; - label = "reserved"; - read-only; - }; - - partition@200000 { - reg = <0x200000 0x010000>; - label = "configuration store"; - }; - - partition@210000 { - reg = <0x210000 0x1d0000>; - label = "bootloader"; - }; - - partition@3e0000 { - reg = <0x3e0000 0x020000>; - label = "bootloader environment"; + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + reg = <0x000000 0x010000>; + label = "rcw"; + read-only; + }; + + partition@10000 { + reg = <0x010000 0x1d0000>; + label = "failsafe bootloader"; + read-only; + }; + + partition@200000 { + reg = <0x200000 0x010000>; + label = "configuration store"; + }; + + partition@210000 { + reg = <0x210000 0x1d0000>; + label = "bootloader"; + }; + + partition@3e0000 { + reg = <0x3e0000 0x020000>; + label = "bootloader environment"; + }; }; }; }; @@ -191,7 +179,7 @@ &i2c0 { status = "okay"; - rtc@32 { + rtc: rtc@32 { compatible = "microcrystal,rv8803"; reg = <0x32>; }; diff --git a/dts/src/arm64/freescale/fsl-ls1028a-qds.dts b/dts/src/arm64/freescale/fsl-ls1028a-qds.dts index fbcba9cb85..bfd14b6456 100644 --- a/dts/src/arm64/freescale/fsl-ls1028a-qds.dts +++ b/dts/src/arm64/freescale/fsl-ls1028a-qds.dts @@ -25,6 +25,7 @@ serial1 = &duart1; mmc0 = &esdhc; mmc1 = &esdhc1; + rtc1 = &ftm_alarm0; }; chosen { diff --git a/dts/src/arm64/freescale/fsl-ls1028a-rdb.dts b/dts/src/arm64/freescale/fsl-ls1028a-rdb.dts index 41ae6e7675..9322c6ad8e 100644 --- a/dts/src/arm64/freescale/fsl-ls1028a-rdb.dts +++ b/dts/src/arm64/freescale/fsl-ls1028a-rdb.dts @@ -21,6 +21,7 @@ serial1 = &duart1; mmc0 = &esdhc; mmc1 = &esdhc1; + rtc1 = &ftm_alarm0; }; chosen { diff --git a/dts/src/arm64/freescale/fsl-ls1028a.dtsi b/dts/src/arm64/freescale/fsl-ls1028a.dtsi index 262fbad8f0..eca06a0c3c 100644 --- a/dts/src/arm64/freescale/fsl-ls1028a.dtsi +++ b/dts/src/arm64/freescale/fsl-ls1028a.dtsi @@ -18,10 +18,6 @@ #address-cells = <2>; #size-cells = <2>; - aliases { - rtc1 = &ftm_alarm0; - }; - cpus { #address-cells = <1>; #size-cells = <0>; @@ -1027,7 +1023,7 @@ status = "disabled"; fixed-link { - speed = <1000>; + speed = <2500>; full-duplex; }; }; @@ -1114,6 +1110,18 @@ full-duplex; }; }; + + rcec@1f,0 { + reg = <0x00f800 0 0 0 0>; + /* IEP INT_A */ + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + /* Integrated Endpoint Register Block */ + ierb@1f0800000 { + compatible = "fsl,ls1028a-enetc-ierb"; + reg = <0x01 0xf0800000 0x0 0x10000>; }; rcpm: power-controller@1e34040 { diff --git a/dts/src/arm64/freescale/fsl-lx2160a-cex7.dtsi b/dts/src/arm64/freescale/fsl-lx2160a-cex7.dtsi index 459dccad83..afb455210b 100644 --- a/dts/src/arm64/freescale/fsl-lx2160a-cex7.dtsi +++ b/dts/src/arm64/freescale/fsl-lx2160a-cex7.dtsi @@ -122,6 +122,30 @@ vcc-supply = <&sb_3v3>; }; }; + + sfp0_i2c: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + sfp1_i2c: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + sfp2_i2c: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + + sfp3_i2c: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; }; }; diff --git a/dts/src/arm64/freescale/fsl-lx2160a-clearfog-itx.dtsi b/dts/src/arm64/freescale/fsl-lx2160a-clearfog-itx.dtsi index 2b63235ca6..17f8e73397 100644 --- a/dts/src/arm64/freescale/fsl-lx2160a-clearfog-itx.dtsi +++ b/dts/src/arm64/freescale/fsl-lx2160a-clearfog-itx.dtsi @@ -30,6 +30,54 @@ gpios = <&gpio2 6 GPIO_ACTIVE_LOW>; }; }; + + sfp0: sfp-0 { + compatible = "sff,sfp"; + i2c-bus = <&sfp0_i2c>; + mod-def0-gpio = <&gpio2 0 GPIO_ACTIVE_LOW>; + maximum-power-milliwatt = <2000>; + }; + + sfp1: sfp-1 { + compatible = "sff,sfp"; + i2c-bus = <&sfp1_i2c>; + mod-def0-gpio = <&gpio2 9 GPIO_ACTIVE_LOW>; + maximum-power-milliwatt = <2000>; + }; + + sfp2: sfp-2 { + compatible = "sff,sfp"; + i2c-bus = <&sfp2_i2c>; + mod-def0-gpio = <&gpio2 10 GPIO_ACTIVE_LOW>; + maximum-power-milliwatt = <2000>; + }; + + sfp3: sfp-3 { + compatible = "sff,sfp"; + i2c-bus = <&sfp3_i2c>; + mod-def0-gpio = <&gpio2 11 GPIO_ACTIVE_LOW>; + maximum-power-milliwatt = <2000>; + }; +}; + +&dpmac7 { + sfp = <&sfp0>; + managed = "in-band-status"; +}; + +&dpmac8 { + sfp = <&sfp1>; + managed = "in-band-status"; +}; + +&dpmac9 { + sfp = <&sfp2>; + managed = "in-band-status"; +}; + +&dpmac10 { + sfp = <&sfp3>; + managed = "in-band-status"; }; &emdio2 { @@ -44,6 +92,22 @@ status = "okay"; }; +&pcs_mdio7 { + status = "okay"; +}; + +&pcs_mdio8 { + status = "okay"; +}; + +&pcs_mdio9 { + status = "okay"; +}; + +&pcs_mdio10 { + status = "okay"; +}; + &sata0 { status = "okay"; }; diff --git a/dts/src/arm64/freescale/imx8-ss-adma.dtsi b/dts/src/arm64/freescale/imx8-ss-adma.dtsi new file mode 100644 index 0000000000..9386d1a59e --- /dev/null +++ b/dts/src/arm64/freescale/imx8-ss-adma.dtsi @@ -0,0 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2018-2020 NXP + * Dong Aisheng <aisheng.dong@nxp.com> + */ + +#include "imx8-ss-audio.dtsi" +#include "imx8-ss-dma.dtsi" diff --git a/dts/src/arm64/freescale/imx8-ss-audio.dtsi b/dts/src/arm64/freescale/imx8-ss-audio.dtsi new file mode 100644 index 0000000000..6c8d75ef92 --- /dev/null +++ b/dts/src/arm64/freescale/imx8-ss-audio.dtsi @@ -0,0 +1,68 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2018-2019 NXP + * Dong Aisheng <aisheng.dong@nxp.com> + */ + +#include <dt-bindings/clock/imx8-lpcg.h> +#include <dt-bindings/firmware/imx/rsrc.h> + +audio_subsys: bus@59000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x59000000 0x0 0x59000000 0x1000000>; + + audio_ipg_clk: clock-audio-ipg { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <120000000>; + clock-output-names = "audio_ipg_clk"; + }; + + dsp_lpcg: clock-controller@59580000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x59580000 0x10000>; + #clock-cells = <1>; + clocks = <&audio_ipg_clk>, + <&audio_ipg_clk>, + <&audio_ipg_clk>; + clock-indices = <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>, + <IMX_LPCG_CLK_7>; + clock-output-names = "dsp_lpcg_adb_clk", + "dsp_lpcg_ipg_clk", + "dsp_lpcg_core_clk"; + power-domains = <&pd IMX_SC_R_DSP>; + }; + + dsp_ram_lpcg: clock-controller@59590000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x59590000 0x10000>; + #clock-cells = <1>; + clocks = <&audio_ipg_clk>; + clock-indices = <IMX_LPCG_CLK_4>; + clock-output-names = "dsp_ram_lpcg_ipg_clk"; + power-domains = <&pd IMX_SC_R_DSP_RAM>; + }; + + dsp: dsp@596e8000 { + compatible = "fsl,imx8qxp-dsp"; + reg = <0x596e8000 0x88000>; + clocks = <&dsp_lpcg IMX_LPCG_CLK_5>, + <&dsp_ram_lpcg IMX_LPCG_CLK_4>, + <&dsp_lpcg IMX_LPCG_CLK_7>; + clock-names = "ipg", "ocram", "core"; + power-domains = <&pd IMX_SC_R_MU_13A>, + <&pd IMX_SC_R_MU_13B>, + <&pd IMX_SC_R_DSP>, + <&pd IMX_SC_R_DSP_RAM>; + mbox-names = "txdb0", "txdb1", + "rxdb0", "rxdb1"; + mboxes = <&lsio_mu13 2 0>, + <&lsio_mu13 2 1>, + <&lsio_mu13 3 0>, + <&lsio_mu13 3 1>; + memory-region = <&dsp_reserved>; + status = "disabled"; + }; +}; diff --git a/dts/src/arm64/freescale/imx8-ss-conn.dtsi b/dts/src/arm64/freescale/imx8-ss-conn.dtsi new file mode 100644 index 0000000000..e1e81ca0ca --- /dev/null +++ b/dts/src/arm64/freescale/imx8-ss-conn.dtsi @@ -0,0 +1,184 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2018-2019 NXP + * Dong Aisheng <aisheng.dong@nxp.com> + */ + +#include <dt-bindings/clock/imx8-lpcg.h> +#include <dt-bindings/firmware/imx/rsrc.h> + +conn_subsys: bus@5b000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x5b000000 0x0 0x5b000000 0x1000000>; + + conn_axi_clk: clock-conn-axi { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <333333333>; + clock-output-names = "conn_axi_clk"; + }; + + conn_ahb_clk: clock-conn-ahb { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <166666666>; + clock-output-names = "conn_ahb_clk"; + }; + + conn_ipg_clk: clock-conn-ipg { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <83333333>; + clock-output-names = "conn_ipg_clk"; + }; + + usdhc1: mmc@5b010000 { + interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x5b010000 0x10000>; + clocks = <&sdhc0_lpcg IMX_LPCG_CLK_4>, + <&sdhc0_lpcg IMX_LPCG_CLK_5>, + <&sdhc0_lpcg IMX_LPCG_CLK_0>; + clock-names = "ipg", "per", "ahb"; + power-domains = <&pd IMX_SC_R_SDHC_0>; + status = "disabled"; + }; + + usdhc2: mmc@5b020000 { + interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x5b020000 0x10000>; + clocks = <&sdhc1_lpcg IMX_LPCG_CLK_4>, + <&sdhc1_lpcg IMX_LPCG_CLK_5>, + <&sdhc1_lpcg IMX_LPCG_CLK_0>; + clock-names = "ipg", "per", "ahb"; + power-domains = <&pd IMX_SC_R_SDHC_1>; + fsl,tuning-start-tap = <20>; + fsl,tuning-step= <2>; + status = "disabled"; + }; + + usdhc3: mmc@5b030000 { + interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x5b030000 0x10000>; + clocks = <&sdhc2_lpcg IMX_LPCG_CLK_4>, + <&sdhc2_lpcg IMX_LPCG_CLK_5>, + <&sdhc2_lpcg IMX_LPCG_CLK_0>; + clock-names = "ipg", "per", "ahb"; + power-domains = <&pd IMX_SC_R_SDHC_2>; + status = "disabled"; + }; + + fec1: ethernet@5b040000 { + reg = <0x5b040000 0x10000>; + interrupts = <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&enet0_lpcg IMX_LPCG_CLK_4>, + <&enet0_lpcg IMX_LPCG_CLK_2>, + <&enet0_lpcg IMX_LPCG_CLK_1>, + <&enet0_lpcg IMX_LPCG_CLK_0>; + clock-names = "ipg", "ahb", "enet_clk_ref", "ptp"; + fsl,num-tx-queues=<3>; + fsl,num-rx-queues=<3>; + power-domains = <&pd IMX_SC_R_ENET_0>; + status = "disabled"; + }; + + fec2: ethernet@5b050000 { + reg = <0x5b050000 0x10000>; + interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&enet1_lpcg IMX_LPCG_CLK_4>, + <&enet1_lpcg IMX_LPCG_CLK_2>, + <&enet1_lpcg IMX_LPCG_CLK_1>, + <&enet1_lpcg IMX_LPCG_CLK_0>; + clock-names = "ipg", "ahb", "enet_clk_ref", "ptp"; + fsl,num-tx-queues=<3>; + fsl,num-rx-queues=<3>; + power-domains = <&pd IMX_SC_R_ENET_1>; + status = "disabled"; + }; + + /* LPCG clocks */ + sdhc0_lpcg: clock-controller@5b200000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5b200000 0x10000>; + #clock-cells = <1>; + clocks = <&clk IMX_SC_R_SDHC_0 IMX_SC_PM_CLK_PER>, + <&conn_ipg_clk>, <&conn_axi_clk>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>, + <IMX_LPCG_CLK_5>; + clock-output-names = "sdhc0_lpcg_per_clk", + "sdhc0_lpcg_ipg_clk", + "sdhc0_lpcg_ahb_clk"; + power-domains = <&pd IMX_SC_R_SDHC_0>; + }; + + sdhc1_lpcg: clock-controller@5b210000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5b210000 0x10000>; + #clock-cells = <1>; + clocks = <&clk IMX_SC_R_SDHC_1 IMX_SC_PM_CLK_PER>, + <&conn_ipg_clk>, <&conn_axi_clk>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>, + <IMX_LPCG_CLK_5>; + clock-output-names = "sdhc1_lpcg_per_clk", + "sdhc1_lpcg_ipg_clk", + "sdhc1_lpcg_ahb_clk"; + power-domains = <&pd IMX_SC_R_SDHC_1>; + }; + + sdhc2_lpcg: clock-controller@5b220000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5b220000 0x10000>; + #clock-cells = <1>; + clocks = <&clk IMX_SC_R_SDHC_2 IMX_SC_PM_CLK_PER>, + <&conn_ipg_clk>, <&conn_axi_clk>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>, + <IMX_LPCG_CLK_5>; + clock-output-names = "sdhc2_lpcg_per_clk", + "sdhc2_lpcg_ipg_clk", + "sdhc2_lpcg_ahb_clk"; + power-domains = <&pd IMX_SC_R_SDHC_2>; + }; + + enet0_lpcg: clock-controller@5b230000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5b230000 0x10000>; + #clock-cells = <1>; + clocks = <&clk IMX_SC_R_ENET_0 IMX_SC_PM_CLK_PER>, + <&clk IMX_SC_R_ENET_0 IMX_SC_PM_CLK_PER>, + <&conn_axi_clk>, <&conn_ipg_clk>, <&conn_ipg_clk>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>, + <IMX_LPCG_CLK_2>, <IMX_LPCG_CLK_4>, + <IMX_LPCG_CLK_5>; + clock-output-names = "enet0_ipg_root_clk", + "enet0_tx_clk", + "enet0_ahb_clk", + "enet0_ipg_clk", + "enet0_ipg_s_clk"; + power-domains = <&pd IMX_SC_R_ENET_0>; + }; + + enet1_lpcg: clock-controller@5b240000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5b240000 0x10000>; + #clock-cells = <1>; + clocks = <&clk IMX_SC_R_ENET_1 IMX_SC_PM_CLK_PER>, + <&clk IMX_SC_R_ENET_1 IMX_SC_PM_CLK_PER>, + <&conn_axi_clk>, <&conn_ipg_clk>, <&conn_ipg_clk>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>, + <IMX_LPCG_CLK_2>, <IMX_LPCG_CLK_4>, + <IMX_LPCG_CLK_5>; + clock-output-names = "enet1_ipg_root_clk", + "enet1_tx_clk", + "enet1_ahb_clk", + "enet1_ipg_clk", + "enet1_ipg_s_clk"; + power-domains = <&pd IMX_SC_R_ENET_1>; + }; +}; diff --git a/dts/src/arm64/freescale/imx8-ss-ddr.dtsi b/dts/src/arm64/freescale/imx8-ss-ddr.dtsi new file mode 100644 index 0000000000..8b5cad4e27 --- /dev/null +++ b/dts/src/arm64/freescale/imx8-ss-ddr.dtsi @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2019-2020 NXP + * Dong Aisheng <aisheng.dong@nxp.com> + */ + +ddr_subsys: bus@5c000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x5c000000 0x0 0x5c000000 0x1000000>; + + ddr-pmu@5c020000 { + compatible = "fsl,imx8-ddr-pmu"; + reg = <0x5c020000 0x10000>; + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; + }; +}; diff --git a/dts/src/arm64/freescale/imx8-ss-dma.dtsi b/dts/src/arm64/freescale/imx8-ss-dma.dtsi new file mode 100644 index 0000000000..960a802b8b --- /dev/null +++ b/dts/src/arm64/freescale/imx8-ss-dma.dtsi @@ -0,0 +1,202 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2018-2019 NXP + * Dong Aisheng <aisheng.dong@nxp.com> + */ + +#include <dt-bindings/clock/imx8-lpcg.h> +#include <dt-bindings/firmware/imx/rsrc.h> + +dma_subsys: bus@5a000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x5a000000 0x0 0x5a000000 0x1000000>; + + dma_ipg_clk: clock-dma-ipg { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <120000000>; + clock-output-names = "dma_ipg_clk"; + }; + + lpuart0: serial@5a060000 { + reg = <0x5a060000 0x1000>; + interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&uart0_lpcg IMX_LPCG_CLK_4>, + <&uart0_lpcg IMX_LPCG_CLK_0>; + clock-names = "ipg", "baud"; + power-domains = <&pd IMX_SC_R_UART_0>; + status = "disabled"; + }; + + lpuart1: serial@5a070000 { + reg = <0x5a070000 0x1000>; + interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&uart1_lpcg IMX_LPCG_CLK_4>, + <&uart1_lpcg IMX_LPCG_CLK_0>; + clock-names = "ipg", "baud"; + power-domains = <&pd IMX_SC_R_UART_1>; + status = "disabled"; + }; + + lpuart2: serial@5a080000 { + reg = <0x5a080000 0x1000>; + interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&uart2_lpcg IMX_LPCG_CLK_4>, + <&uart2_lpcg IMX_LPCG_CLK_0>; + clock-names = "ipg", "baud"; + power-domains = <&pd IMX_SC_R_UART_2>; + status = "disabled"; + }; + + lpuart3: serial@5a090000 { + reg = <0x5a090000 0x1000>; + interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&uart3_lpcg IMX_LPCG_CLK_4>, + <&uart3_lpcg IMX_LPCG_CLK_0>; + clock-names = "ipg", "baud"; + power-domains = <&pd IMX_SC_R_UART_3>; + status = "disabled"; + }; + + uart0_lpcg: clock-controller@5a460000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5a460000 0x10000>; + #clock-cells = <1>; + clocks = <&clk IMX_SC_R_UART_0 IMX_SC_PM_CLK_PER>, + <&dma_ipg_clk>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>; + clock-output-names = "uart0_lpcg_baud_clk", + "uart0_lpcg_ipg_clk"; + power-domains = <&pd IMX_SC_R_UART_0>; + }; + + uart1_lpcg: clock-controller@5a470000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5a470000 0x10000>; + #clock-cells = <1>; + clocks = <&clk IMX_SC_R_UART_1 IMX_SC_PM_CLK_PER>, + <&dma_ipg_clk>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>; + clock-output-names = "uart1_lpcg_baud_clk", + "uart1_lpcg_ipg_clk"; + power-domains = <&pd IMX_SC_R_UART_1>; + }; + + uart2_lpcg: clock-controller@5a480000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5a480000 0x10000>; + #clock-cells = <1>; + clocks = <&clk IMX_SC_R_UART_2 IMX_SC_PM_CLK_PER>, + <&dma_ipg_clk>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>; + clock-output-names = "uart2_lpcg_baud_clk", + "uart2_lpcg_ipg_clk"; + power-domains = <&pd IMX_SC_R_UART_2>; + }; + + uart3_lpcg: clock-controller@5a490000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5a490000 0x10000>; + #clock-cells = <1>; + clocks = <&clk IMX_SC_R_UART_3 IMX_SC_PM_CLK_PER>, + <&dma_ipg_clk>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>; + clock-output-names = "uart3_lpcg_baud_clk", + "uart3_lpcg_ipg_clk"; + power-domains = <&pd IMX_SC_R_UART_3>; + }; + + i2c0: i2c@5a800000 { + reg = <0x5a800000 0x4000>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&i2c0_lpcg IMX_LPCG_CLK_0>; + clock-names = "per"; + assigned-clocks = <&clk IMX_SC_R_I2C_0 IMX_SC_PM_CLK_PER>; + assigned-clock-rates = <24000000>; + power-domains = <&pd IMX_SC_R_I2C_0>; + status = "disabled"; + }; + + i2c1: i2c@5a810000 { + reg = <0x5a810000 0x4000>; + interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&i2c1_lpcg IMX_LPCG_CLK_0>; + clock-names = "per"; + assigned-clocks = <&clk IMX_SC_R_I2C_1 IMX_SC_PM_CLK_PER>; + assigned-clock-rates = <24000000>; + power-domains = <&pd IMX_SC_R_I2C_1>; + status = "disabled"; + }; + + i2c2: i2c@5a820000 { + reg = <0x5a820000 0x4000>; + interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&i2c2_lpcg IMX_LPCG_CLK_0>; + clock-names = "per"; + assigned-clocks = <&clk IMX_SC_R_I2C_2 IMX_SC_PM_CLK_PER>; + assigned-clock-rates = <24000000>; + power-domains = <&pd IMX_SC_R_I2C_2>; + status = "disabled"; + }; + + i2c3: i2c@5a830000 { + reg = <0x5a830000 0x4000>; + interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&i2c3_lpcg IMX_LPCG_CLK_0>; + clock-names = "per"; + assigned-clocks = <&clk IMX_SC_R_I2C_3 IMX_SC_PM_CLK_PER>; + assigned-clock-rates = <24000000>; + power-domains = <&pd IMX_SC_R_I2C_3>; + status = "disabled"; + }; + + i2c0_lpcg: clock-controller@5ac00000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5ac00000 0x10000>; + #clock-cells = <1>; + clocks = <&clk IMX_SC_R_I2C_0 IMX_SC_PM_CLK_PER>, + <&dma_ipg_clk>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>; + clock-output-names = "i2c0_lpcg_clk", + "i2c0_lpcg_ipg_clk"; + power-domains = <&pd IMX_SC_R_I2C_0>; + }; + + i2c1_lpcg: clock-controller@5ac10000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5ac10000 0x10000>; + #clock-cells = <1>; + clocks = <&clk IMX_SC_R_I2C_1 IMX_SC_PM_CLK_PER>, + <&dma_ipg_clk>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>; + clock-output-names = "i2c1_lpcg_clk", + "i2c1_lpcg_ipg_clk"; + power-domains = <&pd IMX_SC_R_I2C_1>; + }; + + i2c2_lpcg: clock-controller@5ac20000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5ac20000 0x10000>; + #clock-cells = <1>; + clocks = <&clk IMX_SC_R_I2C_2 IMX_SC_PM_CLK_PER>, + <&dma_ipg_clk>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>; + clock-output-names = "i2c2_lpcg_clk", + "i2c2_lpcg_ipg_clk"; + power-domains = <&pd IMX_SC_R_I2C_2>; + }; + + i2c3_lpcg: clock-controller@5ac30000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5ac30000 0x10000>; + #clock-cells = <1>; + clocks = <&clk IMX_SC_R_I2C_3 IMX_SC_PM_CLK_PER>, + <&dma_ipg_clk>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>; + clock-output-names = "i2c3_lpcg_clk", + "i2c3_lpcg_ipg_clk"; + power-domains = <&pd IMX_SC_R_I2C_3>; + }; +}; diff --git a/dts/src/arm64/freescale/imx8-ss-lsio.dtsi b/dts/src/arm64/freescale/imx8-ss-lsio.dtsi new file mode 100644 index 0000000000..ee4e585a9c --- /dev/null +++ b/dts/src/arm64/freescale/imx8-ss-lsio.dtsi @@ -0,0 +1,311 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2018-2020 NXP + * Dong Aisheng <aisheng.dong@nxp.com> + */ + +#include <dt-bindings/clock/imx8-lpcg.h> +#include <dt-bindings/firmware/imx/rsrc.h> + +lsio_subsys: bus@5d000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x5d000000 0x0 0x5d000000 0x1000000>; + + lsio_mem_clk: clock-lsio-mem { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + clock-output-names = "lsio_mem_clk"; + }; + + lsio_bus_clk: clock-lsio-bus { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + clock-output-names = "lsio_bus_clk"; + }; + + lsio_gpio0: gpio@5d080000 { + reg = <0x5d080000 0x10000>; + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + power-domains = <&pd IMX_SC_R_GPIO_0>; + }; + + lsio_gpio1: gpio@5d090000 { + reg = <0x5d090000 0x10000>; + interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + power-domains = <&pd IMX_SC_R_GPIO_1>; + }; + + lsio_gpio2: gpio@5d0a0000 { + reg = <0x5d0a0000 0x10000>; + interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + power-domains = <&pd IMX_SC_R_GPIO_2>; + }; + + lsio_gpio3: gpio@5d0b0000 { + reg = <0x5d0b0000 0x10000>; + interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + power-domains = <&pd IMX_SC_R_GPIO_3>; + }; + + lsio_gpio4: gpio@5d0c0000 { + reg = <0x5d0c0000 0x10000>; + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + power-domains = <&pd IMX_SC_R_GPIO_4>; + }; + + lsio_gpio5: gpio@5d0d0000 { + reg = <0x5d0d0000 0x10000>; + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + power-domains = <&pd IMX_SC_R_GPIO_5>; + }; + + lsio_gpio6: gpio@5d0e0000 { + reg = <0x5d0e0000 0x10000>; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + power-domains = <&pd IMX_SC_R_GPIO_6>; + }; + + lsio_gpio7: gpio@5d0f0000 { + reg = <0x5d0f0000 0x10000>; + interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + power-domains = <&pd IMX_SC_R_GPIO_7>; + }; + + lsio_mu0: mailbox@5d1b0000 { + reg = <0x5d1b0000 0x10000>; + interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <2>; + status = "disabled"; + }; + + lsio_mu1: mailbox@5d1c0000 { + reg = <0x5d1c0000 0x10000>; + interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <2>; + }; + + lsio_mu2: mailbox@5d1d0000 { + reg = <0x5d1d0000 0x10000>; + interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <2>; + status = "disabled"; + }; + + lsio_mu3: mailbox@5d1e0000 { + reg = <0x5d1e0000 0x10000>; + interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <2>; + status = "disabled"; + }; + + lsio_mu4: mailbox@5d1f0000 { + reg = <0x5d1f0000 0x10000>; + interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <2>; + status = "disabled"; + }; + + lsio_mu13: mailbox@5d280000 { + reg = <0x5d280000 0x10000>; + interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <2>; + power-domains = <&pd IMX_SC_R_MU_13A>; + }; + + /* LPCG clocks */ + pwm0_lpcg: clock-controller@5d400000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5d400000 0x10000>; + #clock-cells = <1>; + clocks = <&clk IMX_SC_R_PWM_0 IMX_SC_PM_CLK_PER>, + <&clk IMX_SC_R_PWM_0 IMX_SC_PM_CLK_PER>, + <&clk IMX_SC_R_PWM_0 IMX_SC_PM_CLK_PER>, + <&lsio_bus_clk>, + <&clk IMX_SC_R_PWM_0 IMX_SC_PM_CLK_PER>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>, + <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>, + <IMX_LPCG_CLK_6>; + clock-output-names = "pwm0_lpcg_ipg_clk", + "pwm0_lpcg_ipg_hf_clk", + "pwm0_lpcg_ipg_s_clk", + "pwm0_lpcg_ipg_slv_clk", + "pwm0_lpcg_ipg_mstr_clk"; + power-domains = <&pd IMX_SC_R_PWM_0>; + }; + + pwm1_lpcg: clock-controller@5d410000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5d410000 0x10000>; + #clock-cells = <1>; + clocks = <&clk IMX_SC_R_PWM_1 IMX_SC_PM_CLK_PER>, + <&clk IMX_SC_R_PWM_1 IMX_SC_PM_CLK_PER>, + <&clk IMX_SC_R_PWM_1 IMX_SC_PM_CLK_PER>, + <&lsio_bus_clk>, + <&clk IMX_SC_R_PWM_1 IMX_SC_PM_CLK_PER>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>, + <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>, + <IMX_LPCG_CLK_6>; + clock-output-names = "pwm1_lpcg_ipg_clk", + "pwm1_lpcg_ipg_hf_clk", + "pwm1_lpcg_ipg_s_clk", + "pwm1_lpcg_ipg_slv_clk", + "pwm1_lpcg_ipg_mstr_clk"; + power-domains = <&pd IMX_SC_R_PWM_1>; + }; + + pwm2_lpcg: clock-controller@5d420000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5d420000 0x10000>; + #clock-cells = <1>; + clocks = <&clk IMX_SC_R_PWM_2 IMX_SC_PM_CLK_PER>, + <&clk IMX_SC_R_PWM_2 IMX_SC_PM_CLK_PER>, + <&clk IMX_SC_R_PWM_2 IMX_SC_PM_CLK_PER>, + <&lsio_bus_clk>, + <&clk IMX_SC_R_PWM_2 IMX_SC_PM_CLK_PER>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>, + <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>, + <IMX_LPCG_CLK_6>; + clock-output-names = "pwm2_lpcg_ipg_clk", + "pwm2_lpcg_ipg_hf_clk", + "pwm2_lpcg_ipg_s_clk", + "pwm2_lpcg_ipg_slv_clk", + "pwm2_lpcg_ipg_mstr_clk"; + power-domains = <&pd IMX_SC_R_PWM_2>; + }; + + pwm3_lpcg: clock-controller@5d430000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5d430000 0x10000>; + #clock-cells = <1>; + clocks = <&clk IMX_SC_R_PWM_3 IMX_SC_PM_CLK_PER>, + <&clk IMX_SC_R_PWM_3 IMX_SC_PM_CLK_PER>, + <&clk IMX_SC_R_PWM_3 IMX_SC_PM_CLK_PER>, + <&lsio_bus_clk>, + <&clk IMX_SC_R_PWM_3 IMX_SC_PM_CLK_PER>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>, + <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>, + <IMX_LPCG_CLK_6>; + clock-output-names = "pwm3_lpcg_ipg_clk", + "pwm3_lpcg_ipg_hf_clk", + "pwm3_lpcg_ipg_s_clk", + "pwm3_lpcg_ipg_slv_clk", + "pwm3_lpcg_ipg_mstr_clk"; + power-domains = <&pd IMX_SC_R_PWM_3>; + }; + + pwm4_lpcg: clock-controller@5d440000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5d440000 0x10000>; + #clock-cells = <1>; + clocks = <&clk IMX_SC_R_PWM_4 IMX_SC_PM_CLK_PER>, + <&clk IMX_SC_R_PWM_4 IMX_SC_PM_CLK_PER>, + <&clk IMX_SC_R_PWM_4 IMX_SC_PM_CLK_PER>, + <&lsio_bus_clk>, + <&clk IMX_SC_R_PWM_4 IMX_SC_PM_CLK_PER>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>, + <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>, + <IMX_LPCG_CLK_6>; + clock-output-names = "pwm4_lpcg_ipg_clk", + "pwm4_lpcg_ipg_hf_clk", + "pwm4_lpcg_ipg_s_clk", + "pwm4_lpcg_ipg_slv_clk", + "pwm4_lpcg_ipg_mstr_clk"; + power-domains = <&pd IMX_SC_R_PWM_4>; + }; + + pwm5_lpcg: clock-controller@5d450000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5d450000 0x10000>; + #clock-cells = <1>; + clocks = <&clk IMX_SC_R_PWM_5 IMX_SC_PM_CLK_PER>, + <&clk IMX_SC_R_PWM_5 IMX_SC_PM_CLK_PER>, + <&clk IMX_SC_R_PWM_5 IMX_SC_PM_CLK_PER>, + <&lsio_bus_clk>, + <&clk IMX_SC_R_PWM_5 IMX_SC_PM_CLK_PER>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>, + <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>, + <IMX_LPCG_CLK_6>; + clock-output-names = "pwm5_lpcg_ipg_clk", + "pwm5_lpcg_ipg_hf_clk", + "pwm5_lpcg_ipg_s_clk", + "pwm5_lpcg_ipg_slv_clk", + "pwm5_lpcg_ipg_mstr_clk"; + power-domains = <&pd IMX_SC_R_PWM_5>; + }; + + pwm6_lpcg: clock-controller@5d460000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5d460000 0x10000>; + #clock-cells = <1>; + clocks = <&clk IMX_SC_R_PWM_6 IMX_SC_PM_CLK_PER>, + <&clk IMX_SC_R_PWM_6 IMX_SC_PM_CLK_PER>, + <&clk IMX_SC_R_PWM_6 IMX_SC_PM_CLK_PER>, + <&lsio_bus_clk>, + <&clk IMX_SC_R_PWM_6 IMX_SC_PM_CLK_PER>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>, + <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>, + <IMX_LPCG_CLK_6>; + clock-output-names = "pwm6_lpcg_ipg_clk", + "pwm6_lpcg_ipg_hf_clk", + "pwm6_lpcg_ipg_s_clk", + "pwm6_lpcg_ipg_slv_clk", + "pwm6_lpcg_ipg_mstr_clk"; + power-domains = <&pd IMX_SC_R_PWM_6>; + }; + + pwm7_lpcg: clock-controller@5d470000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5d470000 0x10000>; + #clock-cells = <1>; + clocks = <&clk IMX_SC_R_PWM_7 IMX_SC_PM_CLK_PER>, + <&clk IMX_SC_R_PWM_7 IMX_SC_PM_CLK_PER>, + <&clk IMX_SC_R_PWM_7 IMX_SC_PM_CLK_PER>, + <&lsio_bus_clk>, + <&clk IMX_SC_R_PWM_7 IMX_SC_PM_CLK_PER>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>, + <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>, + <IMX_LPCG_CLK_6>; + clock-output-names = "pwm7_lpcg_ipg_clk", + "pwm7_lpcg_ipg_hf_clk", + "pwm7_lpcg_ipg_s_clk", + "pwm7_lpcg_ipg_slv_clk", + "pwm7_lpcg_ipg_mstr_clk"; + power-domains = <&pd IMX_SC_R_PWM_7>; + }; +}; diff --git a/dts/src/arm64/freescale/imx8mm-icore-mx8mm-ctouch2.dts b/dts/src/arm64/freescale/imx8mm-icore-mx8mm-ctouch2.dts new file mode 100644 index 0000000000..5389d6f2be --- /dev/null +++ b/dts/src/arm64/freescale/imx8mm-icore-mx8mm-ctouch2.dts @@ -0,0 +1,97 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 NXP + * Copyright (c) 2019 Engicam srl + * Copyright (c) 2020 Amarula Solutions(India) + */ + +/dts-v1/; +#include "imx8mm.dtsi" +#include "imx8mm-icore-mx8mm.dtsi" + +/ { + model = "Engicam i.Core MX8M Mini C.TOUCH 2.0"; + compatible = "engicam,icore-mx8mm-ctouch2", "engicam,icore-mx8mm", + "fsl,imx8mm"; + + chosen { + stdout-path = &uart2; + }; +}; + +&fec1 { + status = "okay"; +}; + +&i2c2 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + +&i2c4 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; + status = "okay"; +}; + +&iomuxc { + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL 0x400001c3 + MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA 0x400001c3 + >; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL 0x400001c3 + MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA 0x400001c3 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140 + MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX 0x140 + >; + }; + + pinctrl_usdhc1_gpio: usdhc1gpiogrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x41 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x190 + MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d0 + MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d0 + MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d0 + MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d0 + MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d0 + >; + }; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +/* SD */ +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_usdhc1_gpio>; + cd-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; + max-frequency = <50000000>; + bus-width = <4>; + no-1-8-v; + pm-ignore-notify; + keep-power-in-suspend; + status = "okay"; +}; diff --git a/dts/src/arm64/freescale/imx8mm-icore-mx8mm-edimm2.2.dts b/dts/src/arm64/freescale/imx8mm-icore-mx8mm-edimm2.2.dts new file mode 100644 index 0000000000..a4a2ada148 --- /dev/null +++ b/dts/src/arm64/freescale/imx8mm-icore-mx8mm-edimm2.2.dts @@ -0,0 +1,97 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 NXP + * Copyright (c) 2019 Engicam srl + * Copyright (c) 2020 Amarula Solutions(India) + */ + +/dts-v1/; +#include "imx8mm.dtsi" +#include "imx8mm-icore-mx8mm.dtsi" + +/ { + model = "Engicam i.Core MX8M Mini EDIMM2.2 Starter Kit"; + compatible = "engicam,icore-mx8mm-edimm2.2", "engicam,icore-mx8mm", + "fsl,imx8mm"; + + chosen { + stdout-path = &uart2; + }; +}; + +&fec1 { + status = "okay"; +}; + +&i2c2 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + +&i2c4 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; + status = "okay"; +}; + +&iomuxc { + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL 0x400001c3 + MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA 0x400001c3 + >; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL 0x400001c3 + MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA 0x400001c3 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140 + MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX 0x140 + >; + }; + + pinctrl_usdhc1_gpio: usdhc1gpiogrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x41 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x190 + MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d0 + MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d0 + MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d0 + MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d0 + MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d0 + >; + }; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +/* SD */ +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_usdhc1_gpio>; + cd-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; + max-frequency = <50000000>; + bus-width = <4>; + no-1-8-v; + pm-ignore-notify; + keep-power-in-suspend; + status = "okay"; +}; diff --git a/dts/src/arm64/freescale/imx8mm-icore-mx8mm.dtsi b/dts/src/arm64/freescale/imx8mm-icore-mx8mm.dtsi new file mode 100644 index 0000000000..b40148d728 --- /dev/null +++ b/dts/src/arm64/freescale/imx8mm-icore-mx8mm.dtsi @@ -0,0 +1,232 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2018 NXP + * Copyright (c) 2019 Engicam srl + * Copyright (c) 2020 Amarula Solutons(India) + */ + +/ { + compatible = "engicam,icore-mx8mm", "fsl,imx8mm"; +}; + +&A53_0 { + cpu-supply = <®_buck4>; +}; + +&A53_1 { + cpu-supply = <®_buck4>; +}; + +&A53_2 { + cpu-supply = <®_buck4>; +}; + +&A53_3 { + cpu-supply = <®_buck4>; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy: ethernet-phy@3 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <3>; + reset-gpios = <&gpio3 7 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + }; + }; +}; + +&i2c1 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + pmic@8 { + compatible = "nxp,pf8121a"; + reg = <0x08>; + + regulators { + reg_ldo1: ldo1 { + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + reg_ldo2: ldo2 { + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + reg_ldo3: ldo3 { + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + reg_ldo4: ldo4 { + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + reg_buck1: buck1 { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + reg_buck2: buck2 { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + reg_buck3: buck3 { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + reg_buck4: buck4 { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + reg_buck5: buck5 { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + reg_buck6: buck6 { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + reg_buck7: buck7 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + reg_vsnvs: vsnvs { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + }; + }; +}; + +&iomuxc { + pinctrl_fec1: fec1grp { + fsl,pins = < + MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x3 + MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3 + MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f + MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f + MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f + MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f + MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 + MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 + MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 + MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 + MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f + MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 + MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 + MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f + MX8MM_IOMUXC_NAND_DATA01_GPIO3_IO7 0x19 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3 + MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x190 + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d0 + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d0 + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d0 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0 + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d0 + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d0 + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d0 + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d0 + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d0 + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x190 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x194 + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4 + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4 + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4 + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4 + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4 + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4 + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4 + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4 + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x194 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x196 + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6 + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d6 + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d6 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d6 + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d6 + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d6 + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d6 + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d6 + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d6 + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x196 + >; + }; +}; + +/* eMMC */ +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + bus-width = <8>; + non-removable; + status = "okay"; +}; diff --git a/dts/src/arm64/freescale/imx8mm-nitrogen-r2.dts b/dts/src/arm64/freescale/imx8mm-nitrogen-r2.dts index c0c384d761..74c0989160 100644 --- a/dts/src/arm64/freescale/imx8mm-nitrogen-r2.dts +++ b/dts/src/arm64/freescale/imx8mm-nitrogen-r2.dts @@ -9,6 +9,53 @@ / { model = "Boundary Devices i.MX8MMini Nitrogen8MM Rev2"; compatible = "boundary,imx8mm-nitrogen8mm", "fsl,imx8mm"; + + reg_vref_1v8: regulator-vref-1v8 { + compatible = "regulator-fixed"; + regulator-name = "vref-1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + reg_vref_3v3: regulator-vref-3v3 { + compatible = "regulator-fixed"; + regulator-name = "vref-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_wlan_vmmc: regulator-wlan-vmmc { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_wlan_vmmc>; + regulator-name = "reg_wlan_vmmc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 20 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + sound-wm8960 { + audio-cpu = <&sai1>; + audio-codec = <&wm8960>; + audio-routing = + "Headphone Jack", "HP_L", + "Headphone Jack", "HP_R", + "Ext Spk", "SPK_LP", + "Ext Spk", "SPK_LN", + "Ext Spk", "SPK_RP", + "Ext Spk", "SPK_RN", + "RINPUT1", "Mic Jack", + "Mic Jack", "MICB"; + compatible = "fsl,imx-audio-wm8960"; + /* JD2: hp detect high for headphone*/ + hp-det-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>; + /* Jack is not stuffed */ + mic-det-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; + model = "wm8960-audio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sound_wm8960>; + }; }; &A53_0 { @@ -27,6 +74,17 @@ cpu-supply = <®_buck3>; }; +/* J15 */ +&ecspi2 { + assigned-clocks = <&clk IMX8MM_CLK_ECSPI2>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_40M>; + assigned-clock-rates = <40000000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + &fec1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fec1>; @@ -47,6 +105,12 @@ }; }; +&flexspi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexspi>; + status = "okay"; +}; + &i2c1 { clock-frequency = <100000>; pinctrl-names = "default"; @@ -156,7 +220,7 @@ #address-cells = <1>; #size-cells = <0>; - i2c3 { + i2c3@0 { reg = <0>; #address-cells = <1>; #size-cells = <0>; @@ -173,12 +237,88 @@ }; }; +&i2c4 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; + status = "okay"; + + wm8960: codec@1a { + compatible = "wlf,wm8960"; + reg = <0x1a>; + clocks = <&clk IMX8MM_CLK_SAI1_ROOT>; + clock-names = "mclk1"; + wlf,shared-lrclk; + #sound-dai-cells = <0>; + }; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + +&pwm2 { + assigned-clocks = <&clk IMX8MM_CLK_PWM2>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_40M>; + assigned-clock-rates = <40000000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2>; + status = "okay"; +}; + +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; + status = "okay"; +}; + +&pwm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm4>; + status = "okay"; +}; + +&sai1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai1>; + status = "okay"; +}; + +&sai2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai2>; + status = "okay"; +}; + +/* BT */ +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + uart-has-rtscts; + status = "okay"; +}; + /* console */ &uart2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; - assigned-clocks = <&clk IMX8MM_CLK_UART2>; - assigned-clock-parents = <&clk IMX8MM_CLK_24M>; + status = "okay"; +}; + +/* J15 */ +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + uart-has-rtscts; + status = "okay"; +}; + +/* J9 */ +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; status = "okay"; }; @@ -191,6 +331,8 @@ pinctrl-0 = <&pinctrl_usdhc1>; pinctrl-1 = <&pinctrl_usdhc1_100mhz>; pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + vmmc-supply = <®_vref_3v3>; + vqmmc-supply = <®_vref_1v8>; status = "okay"; }; @@ -206,6 +348,48 @@ status = "okay"; }; +/* wlan */ +&usdhc3 { + bus-width = <4>; + sdhci-caps-mask = <0x2 0x0>; + non-removable; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + vmmc-supply = <®_wlan_vmmc>; + vqmmc-supply = <®_vref_1v8>; + status = "okay"; +}; + +/* USB OTG port */ +&usbotg1 { + dr_mode = "otg"; + over-current-active-low; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg1>; + power-active-high; + status = "okay"; +}; + +/* USB Host port */ +&usbotg2 { + dr_mode = "host"; + over-current-active-low; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg2>; + power-active-high; + /* + * FIXME: having USB2 enabled hangs the boot just after: + *[ 1.655941] ci_hdrc ci_hdrc.1: EHCI Host Controller + *[ 1.660880] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2 + *[ 1.681505] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 + *[ 1.687730] hub 2-0:1.0: USB hub found + *[ 1.691528] hub 2-0:1.0: 1 port detected + */ + status = "disabled"; +}; + &wdog1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_wdog>; @@ -217,6 +401,15 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hog>; + pinctrl_ecspi2: ecspi2grp { + fsl,pins = < + MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0x140 + MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0x19 + MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0x19 + MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0x19 + >; + }; + pinctrl_fec1: fec1grp { fsl,pins = < MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x3 @@ -237,6 +430,17 @@ >; }; + pinctrl_flexspi: flexspigrp { + fsl,pins = < + MX8MM_IOMUXC_NAND_ALE_QSPI_A_SCLK 0x1c2 + MX8MM_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B 0x82 + MX8MM_IOMUXC_NAND_DATA00_QSPI_A_DATA0 0x82 + MX8MM_IOMUXC_NAND_DATA01_QSPI_A_DATA1 0x82 + MX8MM_IOMUXC_NAND_DATA02_QSPI_A_DATA2 0x82 + MX8MM_IOMUXC_NAND_DATA03_QSPI_A_DATA3 0x82 + >; + }; + pinctrl_hog: hoggrp { fsl,pins = < MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x09 @@ -258,12 +462,86 @@ >; }; + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL 0x400001c3 + MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA 0x400001c3 + >; + }; + pinctrl_i2c3a_rv4162: i2c3a-rv4162grp { fsl,pins = < MX8MM_IOMUXC_SAI2_RXC_GPIO4_IO22 0x1c0 >; }; + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX8MM_IOMUXC_SPDIF_EXT_CLK_PWM1_OUT 0x16 + >; + }; + + pinctrl_pwm2: pwm2grp { + fsl,pins = < + MX8MM_IOMUXC_SPDIF_RX_PWM2_OUT 0x16 + >; + }; + + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX8MM_IOMUXC_SPDIF_TX_PWM3_OUT 0x16 + >; + }; + + pinctrl_pwm4: pwm4grp { + fsl,pins = < + MX8MM_IOMUXC_SAI3_MCLK_PWM4_OUT 0x16 + >; + }; + + pinctrl_reg_wlan_vmmc: reg-wlan-vmmcgrp { + fsl,pins = < + MX8MM_IOMUXC_SAI5_RXC_GPIO3_IO20 0x16 + >; + }; + + pinctrl_sai1: sai1grp { + fsl,pins = < + /* wm8960 */ + MX8MM_IOMUXC_SAI1_MCLK_SAI1_MCLK 0xd6 + MX8MM_IOMUXC_SAI1_TXFS_SAI1_TX_SYNC 0xd6 + MX8MM_IOMUXC_SAI1_TXC_SAI1_TX_BCLK 0xd6 + MX8MM_IOMUXC_SAI1_TXD0_SAI1_TX_DATA0 0xd6 + MX8MM_IOMUXC_SAI1_RXD0_SAI1_RX_DATA0 0xd6 + >; + }; + + pinctrl_sai2: sai2grp { + fsl,pins = < + /* Bluetooth PCM */ + MX8MM_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC 0xd6 + MX8MM_IOMUXC_SAI2_TXC_SAI2_TX_BCLK 0xd6 + MX8MM_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0 0xd6 + MX8MM_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0 0xd6 + >; + }; + + pinctrl_sound_wm8960: sound-wm8960grp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x80 + MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28 0x80 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX 0x140 + MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX 0x140 + MX8MM_IOMUXC_UART3_RXD_UART1_DCE_CTS_B 0x140 + MX8MM_IOMUXC_UART3_TXD_UART1_DCE_RTS_B 0x140 + >; + }; + pinctrl_uart2: uart2grp { fsl,pins = < MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140 @@ -271,6 +549,36 @@ >; }; + pinctrl_uart3: uart3grp { + fsl,pins = < + MX8MM_IOMUXC_ECSPI1_SCLK_UART3_DCE_RX 0x140 + MX8MM_IOMUXC_ECSPI1_MOSI_UART3_DCE_TX 0x140 + MX8MM_IOMUXC_ECSPI1_SS0_UART3_DCE_RTS_B 0x140 + MX8MM_IOMUXC_ECSPI1_MISO_UART3_DCE_CTS_B 0x140 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX 0x140 + MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX 0x140 + >; + }; + + pinctrl_usbotg1: usbotg1grp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO12_USB1_OTG_PWR 0x16 + MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC 0x156 + >; + }; + + pinctrl_usbotg2: usbotg2grp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO14_USB2_OTG_PWR 0x16 + MX8MM_IOMUXC_GPIO1_IO15_USB2_OTG_OC 0x15 + >; + }; + pinctrl_usdhc1: usdhc1grp { fsl,pins = < MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x190 diff --git a/dts/src/arm64/freescale/imx8mm.dtsi b/dts/src/arm64/freescale/imx8mm.dtsi index 6bf1d15ba1..a27e02bee6 100644 --- a/dts/src/arm64/freescale/imx8mm.dtsi +++ b/dts/src/arm64/freescale/imx8mm.dtsi @@ -887,7 +887,7 @@ interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX8MM_CLK_QSPI_ROOT>, <&clk IMX8MM_CLK_QSPI_ROOT>; - clock-names = "fspi", "fspi_en"; + clock-names = "fspi_en", "fspi"; status = "disabled"; }; diff --git a/dts/src/arm64/freescale/imx8mn-beacon-som.dtsi b/dts/src/arm64/freescale/imx8mn-beacon-som.dtsi index de2cd0e320..c35eeaff95 100644 --- a/dts/src/arm64/freescale/imx8mn-beacon-som.dtsi +++ b/dts/src/arm64/freescale/imx8mn-beacon-som.dtsi @@ -262,8 +262,12 @@ &usdhc1 { #address-cells = <1>; #size-cells = <0>; - pinctrl-names = "default"; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + vmmc-supply = <&buck4_reg>; + vqmmc-supply = <&buck5_reg>; bus-width = <4>; non-removable; cap-power-off-card; diff --git a/dts/src/arm64/freescale/imx8mn.dtsi b/dts/src/arm64/freescale/imx8mn.dtsi index 16ea500895..4dac4da38f 100644 --- a/dts/src/arm64/freescale/imx8mn.dtsi +++ b/dts/src/arm64/freescale/imx8mn.dtsi @@ -898,7 +898,7 @@ interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX8MN_CLK_QSPI_ROOT>, <&clk IMX8MN_CLK_QSPI_ROOT>; - clock-names = "fspi", "fspi_en"; + clock-names = "fspi_en", "fspi"; status = "disabled"; }; diff --git a/dts/src/arm64/freescale/imx8mp-evk.dts b/dts/src/arm64/freescale/imx8mp-evk.dts index 7db4273cc8..2c28e58967 100644 --- a/dts/src/arm64/freescale/imx8mp-evk.dts +++ b/dts/src/arm64/freescale/imx8mp-evk.dts @@ -98,6 +98,8 @@ reg = <1>; eee-broken-1000t; reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <80000>; }; }; }; diff --git a/dts/src/arm64/freescale/imx8mp-phyboard-pollux-rdk.dts b/dts/src/arm64/freescale/imx8mp-phyboard-pollux-rdk.dts index 122c95ddad..984a6b9ded 100644 --- a/dts/src/arm64/freescale/imx8mp-phyboard-pollux-rdk.dts +++ b/dts/src/arm64/freescale/imx8mp-phyboard-pollux-rdk.dts @@ -16,7 +16,7 @@ "phytec,imx8mp-phycore-som", "fsl,imx8mp"; chosen { - stdout-path = &uart2; + stdout-path = &uart1; }; reg_usdhc2_vmmc: regulator-usdhc2 { @@ -33,6 +33,30 @@ }; }; +&eqos { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_eqos>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy0>; + status = "okay"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x1>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_1_50_NS>; + ti,tx-internal-delay = <DP83867_RGMIIDCTL_1_50_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>; + enet-phy-lane-no-swap; + }; + }; +}; + &i2c2 { clock-frequency = <400000>; pinctrl-names = "default", "gpio"; @@ -71,9 +95,9 @@ }; /* debug console */ -&uart2 { +&uart1 { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2>; + pinctrl-0 = <&pinctrl_uart1>; status = "okay"; }; @@ -90,6 +114,26 @@ }; &iomuxc { + pinctrl_eqos: eqosgrp { + fsl,pins = < + MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x3 + MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x3 + MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x91 + MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x91 + MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x91 + MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x91 + MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x91 + MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x91 + MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x1f + MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x1f + MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x1f + MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x1f + MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x1f + MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x1f + MX8MP_IOMUXC_SAI1_MCLK__GPIO4_IO20 0x10 + >; + }; + pinctrl_i2c2: i2c2grp { fsl,pins = < MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL 0x400001c3 @@ -110,10 +154,10 @@ >; }; - pinctrl_uart2: uart2grp { + pinctrl_uart1: uart1grp { fsl,pins = < - MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX 0x49 - MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX 0x49 + MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX 0x49 + MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX 0x49 >; }; diff --git a/dts/src/arm64/freescale/imx8mp.dtsi b/dts/src/arm64/freescale/imx8mp.dtsi index c7523fd4ea..c2d51a46cb 100644 --- a/dts/src/arm64/freescale/imx8mp.dtsi +++ b/dts/src/arm64/freescale/imx8mp.dtsi @@ -18,6 +18,7 @@ aliases { ethernet0 = &fec; + ethernet1 = &eqos; gpio0 = &gpio1; gpio1 = &gpio2; gpio2 = &gpio3; @@ -312,6 +313,22 @@ status = "disabled"; }; + wdog2: watchdog@30290000 { + compatible = "fsl,imx8mp-wdt", "fsl,imx21-wdt"; + reg = <0x30290000 0x10000>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_WDOG2_ROOT>; + status = "disabled"; + }; + + wdog3: watchdog@302a0000 { + compatible = "fsl,imx8mp-wdt", "fsl,imx21-wdt"; + reg = <0x302a0000 0x10000>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_WDOG3_ROOT>; + status = "disabled"; + }; + iomuxc: pinctrl@30330000 { compatible = "fsl,imx8mp-iomuxc"; reg = <0x30330000 0x10000>; @@ -786,6 +803,28 @@ nvmem_macaddr_swap; status = "disabled"; }; + + eqos: ethernet@30bf0000 { + compatible = "nxp,imx8mp-dwmac-eqos", "snps,dwmac-5.10a"; + reg = <0x30bf0000 0x10000>; + interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "eth_wake_irq", "macirq"; + clocks = <&clk IMX8MP_CLK_ENET_QOS_ROOT>, + <&clk IMX8MP_CLK_QOS_ENET_ROOT>, + <&clk IMX8MP_CLK_ENET_QOS_TIMER>, + <&clk IMX8MP_CLK_ENET_QOS>; + clock-names = "stmmaceth", "pclk", "ptp_ref", "tx"; + assigned-clocks = <&clk IMX8MP_CLK_ENET_AXI>, + <&clk IMX8MP_CLK_ENET_QOS_TIMER>, + <&clk IMX8MP_CLK_ENET_QOS>; + assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_266M>, + <&clk IMX8MP_SYS_PLL2_100M>, + <&clk IMX8MP_SYS_PLL2_125M>; + assigned-clock-rates = <0>, <100000000>, <125000000>; + intf_mode = <&gpr 0x4>; + status = "disabled"; + }; }; gic: interrupt-controller@38800000 { @@ -828,7 +867,7 @@ ranges; status = "disabled"; - usb_dwc3_0: dwc3@38100000 { + usb_dwc3_0: usb@38100000 { compatible = "snps,dwc3"; reg = <0x38100000 0x10000>; clocks = <&clk IMX8MP_CLK_HSIO_AXI>, @@ -869,7 +908,7 @@ ranges; status = "disabled"; - usb_dwc3_1: dwc3@38200000 { + usb_dwc3_1: usb@38200000 { compatible = "snps,dwc3"; reg = <0x38200000 0x10000>; clocks = <&clk IMX8MP_CLK_HSIO_AXI>, diff --git a/dts/src/arm64/freescale/imx8mq-kontron-pitx-imx8m.dts b/dts/src/arm64/freescale/imx8mq-kontron-pitx-imx8m.dts new file mode 100644 index 0000000000..f593e4ff62 --- /dev/null +++ b/dts/src/arm64/freescale/imx8mq-kontron-pitx-imx8m.dts @@ -0,0 +1,613 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree File for the Kontron pitx-imx8m board. + * + * Copyright (C) 2021 Heiko Thiery <heiko.thiery@gmail.com> + */ + +/dts-v1/; + +#include "imx8mq.dtsi" +#include <dt-bindings/net/ti-dp83867.h> + +/ { + model = "Kontron pITX-imx8m"; + compatible = "kontron,pitx-imx8m", "fsl,imx8mq"; + + aliases { + i2c0 = &i2c1; + i2c1 = &i2c2; + i2c2 = &i2c3; + mmc0 = &usdhc1; + mmc1 = &usdhc2; + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + spi0 = &qspi0; + spi1 = &ecspi2; + }; + + chosen { + stdout-path = "serial2:115200n8"; + }; + + pcie0_refclk: pcie0-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + }; + + pcie1_refclk: pcie1-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + }; + + reg_usdhc2_vmmc: regulator-usdhc2-vmmc { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usdhc2>; + regulator-name = "V_3V3_SD"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; + off-on-delay-us = <20000>; + enable-active-high; + }; +}; + +&ecspi2 { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2 &pinctrl_ecspi2_cs>; + cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; + status = "okay"; + + tpm@0 { + compatible = "infineon,slb9670"; + reg = <0>; + spi-max-frequency = <43000000>; + }; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy0>; + fsl,magic-packet; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; + ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_75_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; + reset-assert-us = <10>; + reset-deassert-us = <280>; + }; + }; +}; + +&i2c1 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + pmic@8 { + compatible = "fsl,pfuze100"; + fsl,pfuze-support-disable-sw; + reg = <0x8>; + + regulators { + sw1a_reg: sw1ab { + regulator-name = "V_0V9_GPU"; + regulator-min-microvolt = <825000>; + regulator-max-microvolt = <1100000>; + }; + + sw1c_reg: sw1c { + regulator-name = "V_0V9_VPU"; + regulator-min-microvolt = <825000>; + regulator-max-microvolt = <1100000>; + }; + + sw2_reg: sw2 { + regulator-name = "V_1V1_NVCC_DRAM"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + sw3a_reg: sw3ab { + regulator-name = "V_1V0_DRAM"; + regulator-min-microvolt = <825000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + sw4_reg: sw4 { + regulator-name = "V_1V8_S0"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + swbst_reg: swbst { + regulator-name = "NC"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + }; + + snvs_reg: vsnvs { + regulator-name = "V_0V9_SNVS"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-name = "V_0V55_VREF_DDR"; + regulator-always-on; + }; + + vgen1_reg: vgen1 { + regulator-name = "V_1V5_CSI"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen2_reg: vgen2 { + regulator-name = "V_0V9_PHY"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <975000>; + regulator-always-on; + }; + + vgen3_reg: vgen3 { + regulator-name = "V_1V8_PHY"; + regulator-min-microvolt = <1675000>; + regulator-max-microvolt = <1975000>; + regulator-always-on; + }; + + vgen4_reg: vgen4 { + regulator-name = "V_1V8_VDDA"; + regulator-min-microvolt = <1625000>; + regulator-max-microvolt = <1875000>; + regulator-always-on; + }; + + vgen5_reg: vgen5 { + regulator-name = "V_3V3_PHY"; + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3625000>; + regulator-always-on; + }; + + vgen6_reg: vgen6 { + regulator-name = "V_2V8_CAM"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; + + fan-controller@1b { + compatible = "maxim,max6650"; + reg = <0x1b>; + maxim,fan-microvolt = <5000000>; + }; + + rtc@32 { + compatible = "microcrystal,rv8803"; + reg = <0x32>; + }; + + sensor@4b { + compatible = "national,lm75b"; + reg = <0x4b>; + }; + + eeprom@51 { + compatible = "atmel,24c32"; + reg = <0x51>; + pagesize = <32>; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; +}; + +/* M.2 B-key slot */ +&pcie0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie0>; + reset-gpio = <&gpio1 9 GPIO_ACTIVE_LOW>; + clocks = <&clk IMX8MQ_CLK_PCIE1_ROOT>, + <&clk IMX8MQ_CLK_PCIE1_AUX>, + <&clk IMX8MQ_CLK_PCIE1_PHY>, + <&pcie0_refclk>; + clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus"; + status = "okay"; +}; + +/* Intel Ethernet Controller I210/I211 */ +&pcie1 { + clocks = <&clk IMX8MQ_CLK_PCIE2_ROOT>, + <&clk IMX8MQ_CLK_PCIE2_AUX>, + <&clk IMX8MQ_CLK_PCIE2_PHY>, + <&pcie1_refclk>; + clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus"; + fsl,max-link-speed = <1>; + status = "okay"; +}; + +&pgc_gpu { + power-supply = <&sw1a_reg>; +}; + +&pgc_vpu { + power-supply = <&sw1c_reg>; +}; + +&qspi0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_qspi>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + m25p,fast-read; + spi-max-frequency = <50000000>; + }; +}; + +&snvs_pwrkey { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + assigned-clocks = <&clk IMX8MQ_CLK_UART1>; + assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_80M>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + assigned-clocks = <&clk IMX8MQ_CLK_UART2>; + assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_80M>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + fsl,uart-has-rtscts; + assigned-clocks = <&clk IMX8MQ_CLK_UART3>; + assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_80M>; + status = "okay"; +}; + +&usb3_phy0 { + status = "okay"; +}; + +&usb3_phy1 { + status = "okay"; +}; + +&usb_dwc3_0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb0>; + dr_mode = "otg"; + hnp-disable; + srp-disable; + adp-disable; + maximum-speed = "high-speed"; + status = "okay"; +}; + +&usb_dwc3_1 { + dr_mode = "host"; + status = "okay"; +}; + +&usdhc1 { + assigned-clocks = <&clk IMX8MQ_CLK_USDHC1>; + assigned-clock-rates = <400000000>; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + vqmmc-supply = <&sw4_reg>; + bus-width = <8>; + non-removable; + no-sd; + no-sdio; + status = "okay"; +}; + +&usdhc2 { + assigned-clocks = <&clk IMX8MQ_CLK_USDHC2>; + assigned-clock-rates = <200000000>; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; + bus-width = <4>; + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>; + vmmc-supply = <®_usdhc2_vmmc>; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_hog: hoggrp { + fsl,pins = < + MX8MQ_IOMUXC_NAND_CE1_B_GPIO3_IO2 0x19 /* TPM Reset */ + MX8MQ_IOMUXC_NAND_CE3_B_GPIO3_IO4 0x19 /* USB2 Hub Reset */ + >; + }; + + pinctrl_gpio: gpiogrp { + fsl,pins = < + MX8MQ_IOMUXC_NAND_CLE_GPIO3_IO5 0x19 /* GPIO0 */ + MX8MQ_IOMUXC_NAND_RE_B_GPIO3_IO15 0x19 /* GPIO1 */ + MX8MQ_IOMUXC_NAND_WE_B_GPIO3_IO17 0x19 /* GPIO2 */ + MX8MQ_IOMUXC_NAND_WP_B_GPIO3_IO18 0x19 /* GPIO3 */ + MX8MQ_IOMUXC_NAND_READY_B_GPIO3_IO16 0x19 /* GPIO4 */ + MX8MQ_IOMUXC_NAND_DATA04_GPIO3_IO10 0x19 /* GPIO5 */ + MX8MQ_IOMUXC_NAND_DATA05_GPIO3_IO11 0x19 /* GPIO6 */ + MX8MQ_IOMUXC_NAND_DATA06_GPIO3_IO12 0x19 /* GPIO7 */ + >; + }; + + pinctrl_pcie0: pcie0grp { + fsl,pins = < + MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x16 /* PCIE_PERST */ + MX8MQ_IOMUXC_UART4_TXD_GPIO5_IO29 0x16 /* W_DISABLE */ + >; + }; + + pinctrl_reg_usdhc2: regusdhc2gpiogrp { + fsl,pins = < + MX8MQ_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41 + >; + }; + + pinctrl_fec1: fec1grp { + fsl,pins = < + MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC 0x3 + MX8MQ_IOMUXC_ENET_MDIO_ENET1_MDIO 0x23 + MX8MQ_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f + MX8MQ_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f + MX8MQ_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f + MX8MQ_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f + MX8MQ_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 + MX8MQ_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 + MX8MQ_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 + MX8MQ_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 + MX8MQ_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f + MX8MQ_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 + MX8MQ_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 + MX8MQ_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f + MX8MQ_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x16 + MX8MQ_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x16 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL 0x4000007f + MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA 0x4000007f + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX8MQ_IOMUXC_I2C2_SCL_I2C2_SCL 0x4000007f + MX8MQ_IOMUXC_I2C2_SDA_I2C2_SDA 0x4000007f + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX8MQ_IOMUXC_I2C3_SCL_I2C3_SCL 0x4000007f + MX8MQ_IOMUXC_I2C3_SDA_I2C3_SDA 0x4000007f + >; + }; + + pinctrl_qspi: qspigrp { + fsl,pins = < + MX8MQ_IOMUXC_NAND_ALE_QSPI_A_SCLK 0x82 + MX8MQ_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B 0x82 + MX8MQ_IOMUXC_NAND_DATA00_QSPI_A_DATA0 0x82 + MX8MQ_IOMUXC_NAND_DATA01_QSPI_A_DATA1 0x82 + MX8MQ_IOMUXC_NAND_DATA02_QSPI_A_DATA2 0x82 + MX8MQ_IOMUXC_NAND_DATA03_QSPI_A_DATA3 0x82 + >; + }; + + pinctrl_ecspi2: ecspi2grp { + fsl,pins = < + MX8MQ_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0x19 + MX8MQ_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0x19 + MX8MQ_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0x19 + >; + }; + + pinctrl_ecspi2_cs: ecspi2csgrp { + fsl,pins = < + MX8MQ_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0x19 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX 0x49 + MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX 0x49 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX8MQ_IOMUXC_UART2_TXD_UART2_DCE_TX 0x49 + MX8MQ_IOMUXC_UART2_RXD_UART2_DCE_RX 0x49 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX8MQ_IOMUXC_UART3_TXD_UART3_DCE_TX 0x49 + MX8MQ_IOMUXC_UART3_RXD_UART3_DCE_RX 0x49 + MX8MQ_IOMUXC_ECSPI1_SS0_UART3_DCE_RTS_B 0x49 + MX8MQ_IOMUXC_ECSPI1_MISO_UART3_DCE_CTS_B 0x49 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x83 + MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc3 + MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xc3 + MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xc3 + MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xc3 + MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xc3 + MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xc3 + MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xc3 + MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xc3 + MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xc3 + MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x83 + MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1-100grp { + fsl,pins = < + MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x8d + MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xcd + MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xcd + MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xcd + MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xcd + MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xcd + MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xcd + MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xcd + MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xcd + MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xcd + MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x8d + MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1-200grp { + fsl,pins = < + MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x9f + MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xdf + MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xdf + MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xdf + MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xdf + MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xdf + MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xdf + MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xdf + MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xdf + MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xdf + MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x9f + MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1 + >; + }; + + pinctrl_usdhc2_gpio: usdhc2gpiogrp { + fsl,pins = < + MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12 0x41 + MX8MQ_IOMUXC_SD2_WP_GPIO2_IO20 0x19 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x83 + MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc3 + MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xc3 + MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xc3 + MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xc3 + MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xc3 + MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100grp { + fsl,pins = < + MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x8d + MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xcd + MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xcd + MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xcd + MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xcd + MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xcd + MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200grp { + fsl,pins = < + MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x9f + MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xdf + MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xdf + MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xdf + MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xdf + MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xdf + MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1 + >; + }; + + pinctrl_usb0: usb0grp { + fsl,pins = < + MX8MQ_IOMUXC_GPIO1_IO12_USB1_OTG_PWR 0x19 + MX8MQ_IOMUXC_GPIO1_IO13_USB1_OTG_OC 0x19 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 + >; + }; +}; diff --git a/dts/src/arm64/freescale/imx8mq-librem5-devkit.dts b/dts/src/arm64/freescale/imx8mq-librem5-devkit.dts index dd217a0760..622f3787a1 100644 --- a/dts/src/arm64/freescale/imx8mq-librem5-devkit.dts +++ b/dts/src/arm64/freescale/imx8mq-librem5-devkit.dts @@ -50,13 +50,6 @@ linux,code = <KEY_VOLUMEDOWN>; }; - hp-det { - label = "HP_DET"; - gpios = <&gpio3 20 GPIO_ACTIVE_LOW>; - wakeup-source; - linux,code = <KEY_HP>; - }; - wwan-wake { label = "WWAN_WAKE"; gpios = <&gpio3 8 GPIO_ACTIVE_LOW>; @@ -163,21 +156,35 @@ #sound-dai-cells = <0>; }; + mic_mux: mic-mux { + compatible = "simple-audio-mux"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_micsel>; + mux-gpios = <&gpio5 5 GPIO_ACTIVE_LOW>; + sound-name-prefix = "Mic Mux"; + }; + sound { compatible = "simple-audio-card"; - simple-audio-card,name = "sgtl5000"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hpdet>; + simple-audio-card,aux-devs = <&speaker_amp>, <&mic_mux>; + simple-audio-card,name = "Librem 5 Devkit"; simple-audio-card,format = "i2s"; simple-audio-card,widgets = - "Microphone", "Microphone Jack", - "Headphone", "Headphone Jack", - "Speaker", "Speaker Ext", - "Line", "Line In Jack"; + "Microphone", "Builtin Microphone", + "Microphone", "Headset Microphone", + "Headphone", "Headphones", + "Speaker", "Builtin Speaker"; simple-audio-card,routing = - "MIC_IN", "Microphone Jack", - "Microphone Jack", "Mic Bias", - "LINE_IN", "Line In Jack", - "Headphone Jack", "HP_OUT", - "Speaker Ext", "LINE_OUT"; + "MIC_IN", "Mic Mux OUT", + "Mic Mux IN1", "Headset Microphone", + "Mic Mux IN2", "Builtin Microphone", + "Mic Mux OUT", "Mic Bias", + "Headphones", "HP_OUT", + "Builtin Speaker", "Speaker Amp OUTR", + "Speaker Amp INR", "LINE_OUT"; + simple-audio-card,hp-det-gpio = <&gpio3 20 GPIO_ACTIVE_HIGH>; simple-audio-card,cpu { sound-dai = <&sai2>; @@ -207,6 +214,15 @@ }; }; + speaker_amp: speaker-amp { + compatible = "simple-audio-amplifier"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spkamp>; + VCC-supply = <®_3v3_p>; + sound-name-prefix = "Speaker Amp"; + enable-gpios = <&gpio5 3 GPIO_ACTIVE_HIGH>; + }; + vibrator { compatible = "gpio-vibrator"; pinctrl-names = "default"; @@ -315,7 +331,6 @@ regulator-min-microvolt = <700000>; regulator-max-microvolt = <1300000>; regulator-boot-on; - regulator-enable-ramp-delay = <200>; rohm,dvs-run-voltage = <900000>; }; @@ -610,7 +625,6 @@ fsl,pins = < MX8MQ_IOMUXC_SAI2_RXFS_GPIO4_IO21 0x16 MX8MQ_IOMUXC_SAI2_RXC_GPIO4_IO22 0x16 - MX8MQ_IOMUXC_SAI5_RXC_GPIO3_IO20 0x180 /* HP_DET */ MX8MQ_IOMUXC_NAND_DATA02_GPIO3_IO8 0x80 /* nWoWWAN */ >; }; @@ -621,6 +635,12 @@ >; }; + pinctrl_hpdet: hpdetgrp { + fsl,pins = < + MX8MQ_IOMUXC_SAI5_RXC_GPIO3_IO20 0xC0 /* HP_DET */ + >; + }; + pinctrl_i2c1: i2c1grp { fsl,pins = < MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL 0x4000001f @@ -641,6 +661,18 @@ >; }; + pinctrl_micsel: micselgrp { + fsl,pins = < + MX8MQ_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5 0xc6 /* MIC_SEL */ + >; + }; + + pinctrl_spkamp: spkamp { + fsl,pins = < + MX8MQ_IOMUXC_SPDIF_TX_GPIO5_IO3 0x81 /* MUTE */ + >; + }; + pinctrl_pmic: pmicgrp { fsl,pins = < MX8MQ_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x80 /* PMIC intr */ diff --git a/dts/src/arm64/freescale/imx8mq-librem5-r2.dts b/dts/src/arm64/freescale/imx8mq-librem5-r2.dts index d77fc5df3f..73bd431cbd 100644 --- a/dts/src/arm64/freescale/imx8mq-librem5-r2.dts +++ b/dts/src/arm64/freescale/imx8mq-librem5-r2.dts @@ -25,5 +25,5 @@ }; &proximity { - proximity-near-level = <220>; + proximity-near-level = <120>; }; diff --git a/dts/src/arm64/freescale/imx8mq-librem5-r3.dts b/dts/src/arm64/freescale/imx8mq-librem5-r3.dts index 0d38327043..cd3c3edd48 100644 --- a/dts/src/arm64/freescale/imx8mq-librem5-r3.dts +++ b/dts/src/arm64/freescale/imx8mq-librem5-r3.dts @@ -28,6 +28,10 @@ ti,termination-current = <144000>; /* uA */ }; +&buck3_reg { + regulator-always-on; +}; + &proximity { proximity-near-level = <25>; }; diff --git a/dts/src/arm64/freescale/imx8mq-librem5.dtsi b/dts/src/arm64/freescale/imx8mq-librem5.dtsi index 06a4799b6a..460ef0d865 100644 --- a/dts/src/arm64/freescale/imx8mq-librem5.dtsi +++ b/dts/src/arm64/freescale/imx8mq-librem5.dtsi @@ -258,6 +258,25 @@ compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "protected0"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "protected1"; + reg = <0x30000 0x10000>; + read-only; + }; + + partition@40000 { + label = "rw"; + reg = <0x40000 0x1C0000>; + }; }; }; @@ -267,8 +286,9 @@ pmic-5v-hog { gpio-hog; - gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; + gpios = <1 GPIO_ACTIVE_HIGH>; input; + lane-mapping = "pmic-5v"; }; }; @@ -1051,8 +1071,6 @@ assigned-clocks = <&clk IMX8MQ_CLK_SAI2>; assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>; assigned-clock-rates = <24576000>; - assigned-clocks = <&clk IMX8MQ_AUDIO_PLL1>, <&clk IMX8MQ_AUDIO_PLL2>; - assigned-clock-rates = <786432000>, <722534400>; status = "okay"; }; diff --git a/dts/src/arm64/freescale/imx8qm-mek.dts b/dts/src/arm64/freescale/imx8qm-mek.dts new file mode 100644 index 0000000000..ce9d3f0b98 --- /dev/null +++ b/dts/src/arm64/freescale/imx8qm-mek.dts @@ -0,0 +1,144 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2018-2019 NXP + * Dong Aisheng <aisheng.dong@nxp.com> + */ + +/dts-v1/; + +#include "imx8qm.dtsi" + +/ { + model = "Freescale i.MX8QM MEK"; + compatible = "fsl,imx8qm-mek", "fsl,imx8qm"; + + chosen { + stdout-path = &lpuart0; + }; + + cpus { + /delete-node/ cpu-map; + /delete-node/ cpu@100; + /delete-node/ cpu@101; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x00000000 0x80000000 0 0x40000000>; + }; + + reg_usdhc2_vmmc: usdhc2-vmmc { + compatible = "regulator-fixed"; + regulator-name = "SD1_SPWR"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + gpio = <&lsio_gpio4 19 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&lpuart0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart0>; + status = "okay"; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy0>; + fsl,magic-packet; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + }; + + ethphy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; + }; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + bus-width = <8>; + no-sd; + no-sdio; + non-removable; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + bus-width = <4>; + vmmc-supply = <®_usdhc2_vmmc>; + cd-gpios = <&lsio_gpio4 22 GPIO_ACTIVE_LOW>; + wp-gpios = <&lsio_gpio4 21 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&iomuxc { + pinctrl_fec1: fec1grp { + fsl,pins = < + IMX8QM_ENET0_MDC_CONN_ENET0_MDC 0x06000020 + IMX8QM_ENET0_MDIO_CONN_ENET0_MDIO 0x06000020 + IMX8QM_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL 0x06000020 + IMX8QM_ENET0_RGMII_TXC_CONN_ENET0_RGMII_TXC 0x06000020 + IMX8QM_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0 0x06000020 + IMX8QM_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1 0x06000020 + IMX8QM_ENET0_RGMII_TXD2_CONN_ENET0_RGMII_TXD2 0x06000020 + IMX8QM_ENET0_RGMII_TXD3_CONN_ENET0_RGMII_TXD3 0x06000020 + IMX8QM_ENET0_RGMII_RXC_CONN_ENET0_RGMII_RXC 0x06000020 + IMX8QM_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL 0x06000020 + IMX8QM_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0 0x06000020 + IMX8QM_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1 0x06000020 + IMX8QM_ENET0_RGMII_RXD2_CONN_ENET0_RGMII_RXD2 0x06000020 + IMX8QM_ENET0_RGMII_RXD3_CONN_ENET0_RGMII_RXD3 0x06000020 + >; + }; + + pinctrl_lpuart0: lpuart0grp { + fsl,pins = < + IMX8QM_UART0_RX_DMA_UART0_RX 0x06000020 + IMX8QM_UART0_TX_DMA_UART0_TX 0x06000020 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + IMX8QM_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041 + IMX8QM_EMMC0_CMD_CONN_EMMC0_CMD 0x00000021 + IMX8QM_EMMC0_DATA0_CONN_EMMC0_DATA0 0x00000021 + IMX8QM_EMMC0_DATA1_CONN_EMMC0_DATA1 0x00000021 + IMX8QM_EMMC0_DATA2_CONN_EMMC0_DATA2 0x00000021 + IMX8QM_EMMC0_DATA3_CONN_EMMC0_DATA3 0x00000021 + IMX8QM_EMMC0_DATA4_CONN_EMMC0_DATA4 0x00000021 + IMX8QM_EMMC0_DATA5_CONN_EMMC0_DATA5 0x00000021 + IMX8QM_EMMC0_DATA6_CONN_EMMC0_DATA6 0x00000021 + IMX8QM_EMMC0_DATA7_CONN_EMMC0_DATA7 0x00000021 + IMX8QM_EMMC0_STROBE_CONN_EMMC0_STROBE 0x00000041 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + IMX8QM_USDHC1_CLK_CONN_USDHC1_CLK 0x06000041 + IMX8QM_USDHC1_CMD_CONN_USDHC1_CMD 0x00000021 + IMX8QM_USDHC1_DATA0_CONN_USDHC1_DATA0 0x00000021 + IMX8QM_USDHC1_DATA1_CONN_USDHC1_DATA1 0x00000021 + IMX8QM_USDHC1_DATA2_CONN_USDHC1_DATA2 0x00000021 + IMX8QM_USDHC1_DATA3_CONN_USDHC1_DATA3 0x00000021 + IMX8QM_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x00000021 + >; + }; +}; diff --git a/dts/src/arm64/freescale/imx8qm-ss-conn.dtsi b/dts/src/arm64/freescale/imx8qm-ss-conn.dtsi new file mode 100644 index 0000000000..42637a4570 --- /dev/null +++ b/dts/src/arm64/freescale/imx8qm-ss-conn.dtsi @@ -0,0 +1,21 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2019-2020 NXP + * Dong Aisheng <aisheng.dong@nxp.com> + */ + +&fec1 { + compatible = "fsl,imx8qm-fec", "fsl,imx6sx-fec"; +}; + +&fec2 { + compatible = "fsl,imx8qm-fec", "fsl,imx6sx-fec"; +}; + +&usdhc1 { + compatible = "fsl,imx8qm-usdhc", "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc"; +}; + +&usdhc2 { + compatible = "fsl,imx8qm-usdhc", "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc"; +}; diff --git a/dts/src/arm64/freescale/imx8qm-ss-dma.dtsi b/dts/src/arm64/freescale/imx8qm-ss-dma.dtsi new file mode 100644 index 0000000000..bbe5f5ecfb --- /dev/null +++ b/dts/src/arm64/freescale/imx8qm-ss-dma.dtsi @@ -0,0 +1,51 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2018-2019 NXP + * Dong Aisheng <aisheng.dong@nxp.com> + */ + +&dma_subsys { + uart4_lpcg: clock-controller@5a4a0000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5a4a0000 0x10000>; + #clock-cells = <1>; + clocks = <&clk IMX_SC_R_UART_4 IMX_SC_PM_CLK_PER>, + <&dma_ipg_clk>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>; + clock-output-names = "uart4_lpcg_baud_clk", + "uart4_lpcg_ipg_clk"; + power-domains = <&pd IMX_SC_R_UART_4>; + }; +}; + +&lpuart0 { + compatible = "fsl,imx8qm-lpuart", "fsl,imx8qxp-lpuart"; +}; + +&lpuart1 { + compatible = "fsl,imx8qm-lpuart", "fsl,imx8qxp-lpuart"; +}; + +&lpuart2 { + compatible = "fsl,imx8qm-lpuart", "fsl,imx8qxp-lpuart"; +}; + +&lpuart3 { + compatible = "fsl,imx8qm-lpuart", "fsl,imx8qxp-lpuart"; +}; + +&i2c0 { + compatible = "fsl,imx8qm-lpi2c", "fsl,imx7ulp-lpi2c"; +}; + +&i2c1 { + compatible = "fsl,imx8qm-lpi2c", "fsl,imx7ulp-lpi2c"; +}; + +&i2c2 { + compatible = "fsl,imx8qm-lpi2c", "fsl,imx7ulp-lpi2c"; +}; + +&i2c3 { + compatible = "fsl,imx8qm-lpi2c", "fsl,imx7ulp-lpi2c"; +}; diff --git a/dts/src/arm64/freescale/imx8qm-ss-lsio.dtsi b/dts/src/arm64/freescale/imx8qm-ss-lsio.dtsi new file mode 100644 index 0000000000..30896610c6 --- /dev/null +++ b/dts/src/arm64/freescale/imx8qm-ss-lsio.dtsi @@ -0,0 +1,61 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2019-2020 NXP + * Dong Aisheng <aisheng.dong@nxp.com> + */ + +&lsio_gpio0 { + compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio"; +}; + +&lsio_gpio1 { + compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio"; +}; + +&lsio_gpio2 { + compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio"; +}; + +&lsio_gpio3 { + compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio"; +}; + +&lsio_gpio4 { + compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio"; +}; + +&lsio_gpio5 { + compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio"; +}; + +&lsio_gpio6 { + compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio"; +}; + +&lsio_gpio7 { + compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio"; +}; + +&lsio_mu0 { + compatible = "fsl,imx8-mu-scu", "fsl,imx8qm-mu", "fsl,imx6sx-mu"; +}; + +&lsio_mu1 { + compatible = "fsl,imx8-mu-scu", "fsl,imx8qm-mu", "fsl,imx6sx-mu"; +}; + +&lsio_mu2 { + compatible = "fsl,imx8-mu-scu", "fsl,imx8qm-mu", "fsl,imx6sx-mu"; +}; + +&lsio_mu3 { + compatible = "fsl,imx8-mu-scu", "fsl,imx8qm-mu", "fsl,imx6sx-mu"; +}; + +&lsio_mu4 { + compatible = "fsl,imx8-mu-scu", "fsl,imx8qm-mu", "fsl,imx6sx-mu"; +}; + +&lsio_mu13 { + compatible = "fsl,imx8qm-mu", "fsl,imx6sx-mu"; +}; diff --git a/dts/src/arm64/freescale/imx8qm.dtsi b/dts/src/arm64/freescale/imx8qm.dtsi new file mode 100644 index 0000000000..12cd059b33 --- /dev/null +++ b/dts/src/arm64/freescale/imx8qm.dtsi @@ -0,0 +1,176 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2018-2019 NXP + * Dong Aisheng <aisheng.dong@nxp.com> + */ + +#include <dt-bindings/clock/imx8-lpcg.h> +#include <dt-bindings/firmware/imx/rsrc.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/pinctrl/pads-imx8qm.h> + +/ { + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + mmc0 = &usdhc1; + mmc1 = &usdhc2; + mmc2 = &usdhc3; + serial0 = &lpuart0; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&A53_0>; + }; + core1 { + cpu = <&A53_1>; + }; + core2 { + cpu = <&A53_2>; + }; + core3 { + cpu = <&A53_3>; + }; + }; + + cluster1 { + core0 { + cpu = <&A72_0>; + }; + core1 { + cpu = <&A72_1>; + }; + }; + }; + + A53_0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x0>; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + }; + + A53_1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x1>; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + }; + + A53_2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x2>; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + }; + + A53_3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x3>; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + }; + + A72_0: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x0 0x100>; + enable-method = "psci"; + next-level-cache = <&A72_L2>; + }; + + A72_1: cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x0 0x101>; + enable-method = "psci"; + next-level-cache = <&A72_L2>; + }; + + A53_L2: l2-cache0 { + compatible = "cache"; + }; + + A72_L2: l2-cache1 { + compatible = "cache"; + }; + }; + + gic: interrupt-controller@51a00000 { + compatible = "arm,gic-v3"; + reg = <0x0 0x51a00000 0 0x10000>, /* GIC Dist */ + <0x0 0x51b00000 0 0xC0000>, /* GICR */ + <0x0 0x52000000 0 0x2000>, /* GICC */ + <0x0 0x52010000 0 0x1000>, /* GICH */ + <0x0 0x52020000 0 0x20000>; /* GICV */ + #interrupt-cells = <3>; + interrupt-controller; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gic>; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* Physical Secure */ + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* Physical Non-Secure */ + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* Virtual */ + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* Hypervisor */ + }; + + scu { + compatible = "fsl,imx-scu"; + mbox-names = "tx0", + "rx0", + "gip3"; + mboxes = <&lsio_mu1 0 0 + &lsio_mu1 1 0 + &lsio_mu1 3 3>; + + pd: imx8qx-pd { + compatible = "fsl,imx8qm-scu-pd", "fsl,scu-pd"; + #power-domain-cells = <1>; + }; + + clk: clock-controller { + compatible = "fsl,imx8qxp-clk", "fsl,scu-clk"; + #clock-cells = <2>; + }; + + iomuxc: pinctrl { + compatible = "fsl,imx8qm-iomuxc"; + }; + + }; + + /* sorted in register address */ + #include "imx8-ss-dma.dtsi" + #include "imx8-ss-conn.dtsi" + #include "imx8-ss-lsio.dtsi" +}; + +#include "imx8qm-ss-dma.dtsi" +#include "imx8qm-ss-conn.dtsi" +#include "imx8qm-ss-lsio.dtsi" diff --git a/dts/src/arm64/freescale/imx8qxp-ai_ml.dts b/dts/src/arm64/freescale/imx8qxp-ai_ml.dts index a3f8cf1959..47bb68823b 100644 --- a/dts/src/arm64/freescale/imx8qxp-ai_ml.dts +++ b/dts/src/arm64/freescale/imx8qxp-ai_ml.dts @@ -13,13 +13,13 @@ compatible = "einfochips,imx8qxp-ai_ml", "fsl,imx8qxp"; aliases { - serial1 = &adma_lpuart1; - serial2 = &adma_lpuart2; - serial3 = &adma_lpuart3; + serial1 = &lpuart1; + serial2 = &lpuart2; + serial3 = &lpuart3; }; chosen { - stdout-path = &adma_lpuart2; + stdout-path = &lpuart2; }; memory@80000000 { @@ -82,7 +82,7 @@ }; /* BT */ -&adma_lpuart0 { +&lpuart0 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lpuart0>; uart-has-rtscts; @@ -90,21 +90,21 @@ }; /* LS-UART0 */ -&adma_lpuart1 { +&lpuart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lpuart1>; status = "okay"; }; /* Debug */ -&adma_lpuart2 { +&lpuart2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lpuart2>; status = "okay"; }; /* PCI-E UART */ -&adma_lpuart3 { +&lpuart3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lpuart3>; status = "okay"; @@ -133,7 +133,7 @@ &usdhc1 { #address-cells = <1>; #size-cells = <0>; - assigned-clocks = <&clk IMX_CONN_SDHC0_CLK>; + assigned-clocks = <&clk IMX_SC_R_SDHC_0 IMX_SC_PM_CLK_PER>; assigned-clock-rates = <200000000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc1>; @@ -151,7 +151,7 @@ /* SD */ &usdhc2 { - assigned-clocks = <&clk IMX_CONN_SDHC1_CLK>; + assigned-clocks = <&clk IMX_SC_R_SDHC_1 IMX_SC_PM_CLK_PER>; assigned-clock-rates = <200000000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc2>; diff --git a/dts/src/arm64/freescale/imx8qxp-colibri-eval-v3.dtsi b/dts/src/arm64/freescale/imx8qxp-colibri-eval-v3.dtsi index c7336f3876..144fc9e82d 100644 --- a/dts/src/arm64/freescale/imx8qxp-colibri-eval-v3.dtsi +++ b/dts/src/arm64/freescale/imx8qxp-colibri-eval-v3.dtsi @@ -26,7 +26,7 @@ }; }; -&adma_i2c1 { +&i2c1 { status = "okay"; /* M41T0M6 real time clock on carrier board */ @@ -37,17 +37,17 @@ }; /* Colibri UART_B */ -&adma_lpuart0 { +&lpuart0 { status= "okay"; }; /* Colibri UART_C */ -&adma_lpuart2 { +&lpuart2 { status= "okay"; }; /* Colibri UART_A */ -&adma_lpuart3 { +&lpuart3 { status= "okay"; }; diff --git a/dts/src/arm64/freescale/imx8qxp-colibri.dtsi b/dts/src/arm64/freescale/imx8qxp-colibri.dtsi index f38acff0d2..89d70e0304 100644 --- a/dts/src/arm64/freescale/imx8qxp-colibri.dtsi +++ b/dts/src/arm64/freescale/imx8qxp-colibri.dtsi @@ -10,7 +10,7 @@ compatible = "toradex,colibri-imx8x", "fsl,imx8qxp"; chosen { - stdout-path = &adma_lpuart3; + stdout-path = &lpuart3; }; reg_module_3v3: regulator-module-3v3 { @@ -22,7 +22,7 @@ }; /* On-module I2C */ -&adma_i2c0 { +&i2c0 { #address-cells = <1>; #size-cells = <0>; clock-frequency = <100000>; @@ -49,7 +49,7 @@ }; /* Colibri I2C */ -&adma_i2c1 { +&i2c1 { #address-cells = <1>; #size-cells = <0>; clock-frequency = <100000>; @@ -58,19 +58,19 @@ }; /* Colibri UART_B */ -&adma_lpuart0 { +&lpuart0 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lpuart0>; }; /* Colibri UART_C */ -&adma_lpuart2 { +&lpuart2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lpuart2>; }; /* Colibri UART_A */ -&adma_lpuart3 { +&lpuart3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lpuart3>, <&pinctrl_lpuart3_ctrl>; }; diff --git a/dts/src/arm64/freescale/imx8qxp-mek.dts b/dts/src/arm64/freescale/imx8qxp-mek.dts index 46437d3c7a..863232a470 100644 --- a/dts/src/arm64/freescale/imx8qxp-mek.dts +++ b/dts/src/arm64/freescale/imx8qxp-mek.dts @@ -12,7 +12,7 @@ compatible = "fsl,imx8qxp-mek", "fsl,imx8qxp"; chosen { - stdout-path = &adma_lpuart0; + stdout-path = &lpuart0; }; memory@80000000 { @@ -30,11 +30,30 @@ }; }; -&adma_dsp { +&dsp { status = "okay"; }; -&adma_i2c1 { +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy0>; + fsl,magic-packet; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + }; + }; +}; + +&i2c1 { #address-cells = <1>; #size-cells = <0>; clock-frequency = <100000>; @@ -110,31 +129,12 @@ }; }; -&adma_lpuart0 { +&lpuart0 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lpuart0>; status = "okay"; }; -&fec1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_fec1>; - phy-mode = "rgmii-id"; - phy-handle = <ðphy0>; - fsl,magic-packet; - status = "okay"; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - ethphy0: ethernet-phy@0 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <0>; - }; - }; -}; - &scu_key { status = "okay"; }; @@ -173,7 +173,7 @@ }; &usdhc1 { - assigned-clocks = <&clk IMX_CONN_SDHC0_CLK>; + assigned-clocks = <&clk IMX_SC_R_SDHC_0 IMX_SC_PM_CLK_PER>; assigned-clock-rates = <200000000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc1>; @@ -185,7 +185,7 @@ }; &usdhc2 { - assigned-clocks = <&clk IMX_CONN_SDHC1_CLK>; + assigned-clocks = <&clk IMX_SC_R_SDHC_1 IMX_SC_PM_CLK_PER>; assigned-clock-rates = <200000000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc2>; diff --git a/dts/src/arm64/freescale/imx8qxp-ss-adma.dtsi b/dts/src/arm64/freescale/imx8qxp-ss-adma.dtsi new file mode 100644 index 0000000000..dc1daa8dc7 --- /dev/null +++ b/dts/src/arm64/freescale/imx8qxp-ss-adma.dtsi @@ -0,0 +1,37 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2018-2020 NXP + * Dong Aisheng <aisheng.dong@nxp.com> + */ + +&lpuart0 { + compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart"; +}; + +&lpuart1 { + compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart"; +}; + +&lpuart2 { + compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart"; +}; + +&lpuart3 { + compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart"; +}; + +&i2c0 { + compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c"; +}; + +&i2c1 { + compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c"; +}; + +&i2c2 { + compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c"; +}; + +&i2c3 { + compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c"; +}; diff --git a/dts/src/arm64/freescale/imx8qxp-ss-conn.dtsi b/dts/src/arm64/freescale/imx8qxp-ss-conn.dtsi new file mode 100644 index 0000000000..f5f58959f6 --- /dev/null +++ b/dts/src/arm64/freescale/imx8qxp-ss-conn.dtsi @@ -0,0 +1,25 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2018-2020 NXP + * Dong Aisheng <aisheng.dong@nxp.com> + */ + +&usdhc1 { + compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc"; +}; + +&usdhc2 { + compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc"; +}; + +&usdhc3 { + compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc"; +}; + +&fec1 { + compatible = "fsl,imx8qxp-fec", "fsl,imx6sx-fec"; +}; + +&fec2 { + compatible = "fsl,imx8qxp-fec", "fsl,imx6sx-fec"; +}; diff --git a/dts/src/arm64/freescale/imx8qxp-ss-lsio.dtsi b/dts/src/arm64/freescale/imx8qxp-ss-lsio.dtsi new file mode 100644 index 0000000000..11395479ff --- /dev/null +++ b/dts/src/arm64/freescale/imx8qxp-ss-lsio.dtsi @@ -0,0 +1,61 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2018-2020 NXP + * Dong Aisheng <aisheng.dong@nxp.com> + */ + +&lsio_gpio0 { + compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio"; +}; + +&lsio_gpio1 { + compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio"; +}; + +&lsio_gpio2 { + compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio"; +}; + +&lsio_gpio3 { + compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio"; +}; + +&lsio_gpio4 { + compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio"; +}; + +&lsio_gpio5 { + compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio"; +}; + +&lsio_gpio6 { + compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio"; +}; + +&lsio_gpio7 { + compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio"; +}; + +&lsio_mu0 { + compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; +}; + +&lsio_mu1 { + compatible = "fsl,imx8-mu-scu", "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; +}; + +&lsio_mu2 { + compatible = "fsl,imx8-mu-scu", "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; +}; + +&lsio_mu3 { + compatible = "fsl,imx8-mu-scu", "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; +}; + +&lsio_mu4 { + compatible = "fsl,imx8-mu-scu", "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; +}; + +&lsio_mu13 { + compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; +}; diff --git a/dts/src/arm64/freescale/imx8qxp.dtsi b/dts/src/arm64/freescale/imx8qxp.dtsi index e46faac1fe..1e6b499509 100644 --- a/dts/src/arm64/freescale/imx8qxp.dtsi +++ b/dts/src/arm64/freescale/imx8qxp.dtsi @@ -1,11 +1,12 @@ // SPDX-License-Identifier: GPL-2.0+ /* * Copyright (C) 2016 Freescale Semiconductor, Inc. - * Copyright 2017-2018 NXP + * Copyright 2017-2020 NXP * Dong Aisheng <aisheng.dong@nxp.com> */ #include <dt-bindings/clock/imx8-clock.h> +#include <dt-bindings/clock/imx8-lpcg.h> #include <dt-bindings/firmware/imx/rsrc.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> @@ -29,10 +30,10 @@ gpio5 = &lsio_gpio5; gpio6 = &lsio_gpio6; gpio7 = &lsio_gpio7; - i2c0 = &adma_i2c0; - i2c1 = &adma_i2c1; - i2c2 = &adma_i2c2; - i2c3 = &adma_i2c3; + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; mmc0 = &usdhc1; mmc1 = &usdhc2; mmc2 = &usdhc3; @@ -41,10 +42,10 @@ mu2 = &lsio_mu2; mu3 = &lsio_mu3; mu4 = &lsio_mu4; - serial0 = &adma_lpuart0; - serial1 = &adma_lpuart1; - serial2 = &adma_lpuart2; - serial3 = &adma_lpuart3; + serial0 = &lpuart0; + serial1 = &lpuart1; + serial2 = &lpuart2; + serial3 = &lpuart3; }; cpus { @@ -58,7 +59,7 @@ reg = <0x0 0x0>; enable-method = "psci"; next-level-cache = <&A35_L2>; - clocks = <&clk IMX_A35_CLK>; + clocks = <&clk IMX_SC_R_A35 IMX_SC_PM_CLK_CPU>; operating-points-v2 = <&a35_opp_table>; #cooling-cells = <2>; }; @@ -69,7 +70,7 @@ reg = <0x0 0x1>; enable-method = "psci"; next-level-cache = <&A35_L2>; - clocks = <&clk IMX_A35_CLK>; + clocks = <&clk IMX_SC_R_A35 IMX_SC_PM_CLK_CPU>; operating-points-v2 = <&a35_opp_table>; #cooling-cells = <2>; }; @@ -80,7 +81,7 @@ reg = <0x0 0x2>; enable-method = "psci"; next-level-cache = <&A35_L2>; - clocks = <&clk IMX_A35_CLK>; + clocks = <&clk IMX_SC_R_A35 IMX_SC_PM_CLK_CPU>; operating-points-v2 = <&a35_opp_table>; #cooling-cells = <2>; }; @@ -91,7 +92,7 @@ reg = <0x0 0x3>; enable-method = "psci"; next-level-cache = <&A35_L2>; - clocks = <&clk IMX_A35_CLK>; + clocks = <&clk IMX_SC_R_A35 IMX_SC_PM_CLK_CPU>; operating-points-v2 = <&a35_opp_table>; #cooling-cells = <2>; }; @@ -158,9 +159,14 @@ &lsio_mu1 1 0 &lsio_mu1 3 3>; + pd: imx8qx-pd { + compatible = "fsl,imx8qxp-scu-pd", "fsl,scu-pd"; + #power-domain-cells = <1>; + }; + clk: clock-controller { compatible = "fsl,imx8qxp-clk"; - #clock-cells = <1>; + #clock-cells = <2>; clocks = <&xtal32k &xtal24m>; clock-names = "xtal_32KHz", "xtal_24Mhz"; }; @@ -175,11 +181,6 @@ #size-cells = <1>; }; - pd: imx8qx-pd { - compatible = "fsl,imx8qxp-scu-pd"; - #power-domain-cells = <1>; - }; - scu_key: scu-key { compatible = "fsl,imx8qxp-sc-key", "fsl,imx-sc-key"; linux,keycodes = <KEY_POWER>; @@ -223,380 +224,6 @@ clock-output-names = "xtal_24MHz"; }; - adma_subsys: bus@59000000 { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x59000000 0x0 0x59000000 0x2000000>; - - adma_lpcg: clock-controller@59000000 { - compatible = "fsl,imx8qxp-lpcg-adma"; - reg = <0x59000000 0x2000000>; - #clock-cells = <1>; - }; - - adma_dsp: dsp@596e8000 { - compatible = "fsl,imx8qxp-dsp"; - reg = <0x596e8000 0x88000>; - clocks = <&adma_lpcg IMX_ADMA_LPCG_DSP_IPG_CLK>, - <&adma_lpcg IMX_ADMA_LPCG_OCRAM_IPG_CLK>, - <&adma_lpcg IMX_ADMA_LPCG_DSP_CORE_CLK>; - clock-names = "ipg", "ocram", "core"; - power-domains = <&pd IMX_SC_R_MU_13A>, - <&pd IMX_SC_R_MU_13B>, - <&pd IMX_SC_R_DSP>, - <&pd IMX_SC_R_DSP_RAM>; - mbox-names = "txdb0", "txdb1", - "rxdb0", "rxdb1"; - mboxes = <&lsio_mu13 2 0>, - <&lsio_mu13 2 1>, - <&lsio_mu13 3 0>, - <&lsio_mu13 3 1>; - memory-region = <&dsp_reserved>; - status = "disabled"; - }; - - adma_lpuart0: serial@5a060000 { - compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart"; - reg = <0x5a060000 0x1000>; - interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&adma_lpcg IMX_ADMA_LPCG_UART0_IPG_CLK>, - <&adma_lpcg IMX_ADMA_LPCG_UART0_BAUD_CLK>; - clock-names = "ipg", "baud"; - power-domains = <&pd IMX_SC_R_UART_0>; - status = "disabled"; - }; - - adma_lpuart1: serial@5a070000 { - compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart"; - reg = <0x5a070000 0x1000>; - interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&adma_lpcg IMX_ADMA_LPCG_UART1_IPG_CLK>, - <&adma_lpcg IMX_ADMA_LPCG_UART1_BAUD_CLK>; - clock-names = "ipg", "baud"; - power-domains = <&pd IMX_SC_R_UART_1>; - status = "disabled"; - }; - - adma_lpuart2: serial@5a080000 { - compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart"; - reg = <0x5a080000 0x1000>; - interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&adma_lpcg IMX_ADMA_LPCG_UART2_IPG_CLK>, - <&adma_lpcg IMX_ADMA_LPCG_UART2_BAUD_CLK>; - clock-names = "ipg", "baud"; - power-domains = <&pd IMX_SC_R_UART_2>; - status = "disabled"; - }; - - adma_lpuart3: serial@5a090000 { - compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart"; - reg = <0x5a090000 0x1000>; - interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&adma_lpcg IMX_ADMA_LPCG_UART3_IPG_CLK>, - <&adma_lpcg IMX_ADMA_LPCG_UART3_BAUD_CLK>; - clock-names = "ipg", "baud"; - power-domains = <&pd IMX_SC_R_UART_3>; - status = "disabled"; - }; - - adma_i2c0: i2c@5a800000 { - compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c"; - reg = <0x5a800000 0x4000>; - interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&adma_lpcg IMX_ADMA_LPCG_I2C0_CLK>; - clock-names = "per"; - assigned-clocks = <&clk IMX_ADMA_I2C0_CLK>; - assigned-clock-rates = <24000000>; - power-domains = <&pd IMX_SC_R_I2C_0>; - status = "disabled"; - }; - - adma_i2c1: i2c@5a810000 { - compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c"; - reg = <0x5a810000 0x4000>; - interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&adma_lpcg IMX_ADMA_LPCG_I2C1_CLK>; - clock-names = "per"; - assigned-clocks = <&clk IMX_ADMA_I2C1_CLK>; - assigned-clock-rates = <24000000>; - power-domains = <&pd IMX_SC_R_I2C_1>; - status = "disabled"; - }; - - adma_i2c2: i2c@5a820000 { - compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c"; - reg = <0x5a820000 0x4000>; - interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&adma_lpcg IMX_ADMA_LPCG_I2C2_CLK>; - clock-names = "per"; - assigned-clocks = <&clk IMX_ADMA_I2C2_CLK>; - assigned-clock-rates = <24000000>; - power-domains = <&pd IMX_SC_R_I2C_2>; - status = "disabled"; - }; - - adma_i2c3: i2c@5a830000 { - compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c"; - reg = <0x5a830000 0x4000>; - interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&adma_lpcg IMX_ADMA_LPCG_I2C3_CLK>; - clock-names = "per"; - assigned-clocks = <&clk IMX_ADMA_I2C3_CLK>; - assigned-clock-rates = <24000000>; - power-domains = <&pd IMX_SC_R_I2C_3>; - status = "disabled"; - }; - }; - - conn_subsys: bus@5b000000 { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x5b000000 0x0 0x5b000000 0x1000000>; - - conn_lpcg: clock-controller@5b200000 { - compatible = "fsl,imx8qxp-lpcg-conn"; - reg = <0x5b200000 0xb0000>; - #clock-cells = <1>; - }; - - usdhc1: mmc@5b010000 { - compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc"; - interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x5b010000 0x10000>; - clocks = <&conn_lpcg IMX_CONN_LPCG_SDHC0_IPG_CLK>, - <&conn_lpcg IMX_CONN_LPCG_SDHC0_PER_CLK>, - <&conn_lpcg IMX_CONN_LPCG_SDHC0_HCLK>; - clock-names = "ipg", "per", "ahb"; - power-domains = <&pd IMX_SC_R_SDHC_0>; - status = "disabled"; - }; - - usdhc2: mmc@5b020000 { - compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc"; - interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x5b020000 0x10000>; - clocks = <&conn_lpcg IMX_CONN_LPCG_SDHC1_IPG_CLK>, - <&conn_lpcg IMX_CONN_LPCG_SDHC1_PER_CLK>, - <&conn_lpcg IMX_CONN_LPCG_SDHC1_HCLK>; - clock-names = "ipg", "per", "ahb"; - power-domains = <&pd IMX_SC_R_SDHC_1>; - fsl,tuning-start-tap = <20>; - fsl,tuning-step= <2>; - status = "disabled"; - }; - - usdhc3: mmc@5b030000 { - compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc"; - interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x5b030000 0x10000>; - clocks = <&conn_lpcg IMX_CONN_LPCG_SDHC2_IPG_CLK>, - <&conn_lpcg IMX_CONN_LPCG_SDHC2_PER_CLK>, - <&conn_lpcg IMX_CONN_LPCG_SDHC2_HCLK>; - clock-names = "ipg", "per", "ahb"; - power-domains = <&pd IMX_SC_R_SDHC_2>; - status = "disabled"; - }; - - fec1: ethernet@5b040000 { - compatible = "fsl,imx8qxp-fec", "fsl,imx6sx-fec"; - reg = <0x5b040000 0x10000>; - interrupts = <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&conn_lpcg IMX_CONN_LPCG_ENET0_IPG_CLK>, - <&conn_lpcg IMX_CONN_LPCG_ENET0_AHB_CLK>, - <&conn_lpcg IMX_CONN_LPCG_ENET0_TX_CLK>, - <&conn_lpcg IMX_CONN_LPCG_ENET0_ROOT_CLK>; - clock-names = "ipg", "ahb", "enet_clk_ref", "ptp"; - fsl,num-tx-queues=<3>; - fsl,num-rx-queues=<3>; - power-domains = <&pd IMX_SC_R_ENET_0>; - status = "disabled"; - }; - - fec2: ethernet@5b050000 { - compatible = "fsl,imx8qxp-fec", "fsl,imx6sx-fec"; - reg = <0x5b050000 0x10000>; - interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&conn_lpcg IMX_CONN_LPCG_ENET1_IPG_CLK>, - <&conn_lpcg IMX_CONN_LPCG_ENET1_AHB_CLK>, - <&conn_lpcg IMX_CONN_LPCG_ENET1_TX_CLK>, - <&conn_lpcg IMX_CONN_LPCG_ENET1_ROOT_CLK>; - clock-names = "ipg", "ahb", "enet_clk_ref", "ptp"; - fsl,num-tx-queues=<3>; - fsl,num-rx-queues=<3>; - power-domains = <&pd IMX_SC_R_ENET_1>; - status = "disabled"; - }; - }; - - ddr_subsyss: bus@5c000000 { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x5c000000 0x0 0x5c000000 0x1000000>; - - ddr-pmu@5c020000 { - compatible = "fsl,imx8-ddr-pmu"; - reg = <0x5c020000 0x10000>; - interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; - }; - }; - - lsio_subsys: bus@5d000000 { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x5d000000 0x0 0x5d000000 0x1000000>; - - lsio_gpio0: gpio@5d080000 { - compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio"; - reg = <0x5d080000 0x10000>; - interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - power-domains = <&pd IMX_SC_R_GPIO_0>; - }; - - lsio_gpio1: gpio@5d090000 { - compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio"; - reg = <0x5d090000 0x10000>; - interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - power-domains = <&pd IMX_SC_R_GPIO_1>; - }; - - lsio_gpio2: gpio@5d0a0000 { - compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio"; - reg = <0x5d0a0000 0x10000>; - interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - power-domains = <&pd IMX_SC_R_GPIO_2>; - }; - - lsio_gpio3: gpio@5d0b0000 { - compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio"; - reg = <0x5d0b0000 0x10000>; - interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - power-domains = <&pd IMX_SC_R_GPIO_3>; - }; - - lsio_gpio4: gpio@5d0c0000 { - compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio"; - reg = <0x5d0c0000 0x10000>; - interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - power-domains = <&pd IMX_SC_R_GPIO_4>; - }; - - lsio_gpio5: gpio@5d0d0000 { - compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio"; - reg = <0x5d0d0000 0x10000>; - interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - power-domains = <&pd IMX_SC_R_GPIO_5>; - }; - - lsio_gpio6: gpio@5d0e0000 { - compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio"; - reg = <0x5d0e0000 0x10000>; - interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - power-domains = <&pd IMX_SC_R_GPIO_6>; - }; - - lsio_gpio7: gpio@5d0f0000 { - compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio"; - reg = <0x5d0f0000 0x10000>; - interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - power-domains = <&pd IMX_SC_R_GPIO_7>; - }; - - lsio_mu0: mailbox@5d1b0000 { - compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; - reg = <0x5d1b0000 0x10000>; - interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>; - #mbox-cells = <2>; - status = "disabled"; - }; - - lsio_mu1: mailbox@5d1c0000 { - compatible = "fsl,imx8-mu-scu", "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; - reg = <0x5d1c0000 0x10000>; - interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; - #mbox-cells = <2>; - }; - - lsio_mu2: mailbox@5d1d0000 { - compatible = "fsl,imx8-mu-scu", "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; - reg = <0x5d1d0000 0x10000>; - interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>; - #mbox-cells = <2>; - status = "disabled"; - }; - - lsio_mu3: mailbox@5d1e0000 { - compatible = "fsl,imx8-mu-scu", "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; - reg = <0x5d1e0000 0x10000>; - interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>; - #mbox-cells = <2>; - status = "disabled"; - }; - - lsio_mu4: mailbox@5d1f0000 { - compatible = "fsl,imx8-mu-scu", "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; - reg = <0x5d1f0000 0x10000>; - interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>; - #mbox-cells = <2>; - status = "disabled"; - }; - - lsio_mu13: mailbox@5d280000 { - compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; - reg = <0x5d280000 0x10000>; - interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>; - #mbox-cells = <2>; - power-domains = <&pd IMX_SC_R_MU_13A>; - }; - - lsio_lpcg: clock-controller@5d400000 { - compatible = "fsl,imx8qxp-lpcg-lsio"; - reg = <0x5d400000 0x400000>; - #clock-cells = <1>; - }; - }; - thermal_zones: thermal-zones { cpu-thermal0 { polling-delay-passive = <250>; @@ -629,4 +256,14 @@ }; }; }; + + /* sorted in register address */ + #include "imx8-ss-adma.dtsi" + #include "imx8-ss-conn.dtsi" + #include "imx8-ss-ddr.dtsi" + #include "imx8-ss-lsio.dtsi" }; + +#include "imx8qxp-ss-adma.dtsi" +#include "imx8qxp-ss-conn.dtsi" +#include "imx8qxp-ss-lsio.dtsi" diff --git a/dts/src/arm64/intel/socfpga_agilex.dtsi b/dts/src/arm64/intel/socfpga_agilex.dtsi index 07c099b4ed..163f33b46e 100644 --- a/dts/src/arm64/intel/socfpga_agilex.dtsi +++ b/dts/src/arm64/intel/socfpga_agilex.dtsi @@ -6,6 +6,7 @@ /dts-v1/; #include <dt-bindings/reset/altr,rst-mgr-s10.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/agilex-clock.h> / { @@ -61,10 +62,10 @@ pmu { compatible = "arm,armv8-pmuv3"; - interrupts = <0 170 4>, - <0 171 4>, - <0 172 4>, - <0 173 4>; + interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, @@ -77,7 +78,7 @@ method = "smc"; }; - intc: intc@fffc1000 { + intc: interrupt-controller@fffc1000 { compatible = "arm,gic-400", "arm,cortex-a15-gic"; #interrupt-cells = <3>; interrupt-controller; @@ -87,6 +88,48 @@ <0x0 0xfffc6000 0x0 0x2000>; }; + clocks { + cb_intosc_hs_div2_clk: cb-intosc-hs-div2-clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + }; + + cb_intosc_ls_clk: cb-intosc-ls-clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + }; + + f2s_free_clk: f2s-free-clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + }; + + osc1: osc1 { + #clock-cells = <0>; + compatible = "fixed-clock"; + }; + + qspi_clk: qspi-clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <200000000>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupt-parent = <&intc>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; + + usbphy0: usbphy { + #phy-cells = <0>; + compatible = "usb-nop-xceiv"; + }; + soc { #address-cells = <1>; #size-cells = <1>; @@ -108,38 +151,10 @@ #clock-cells = <1>; }; - clocks { - cb_intosc_hs_div2_clk: cb-intosc-hs-div2-clk { - #clock-cells = <0>; - compatible = "fixed-clock"; - }; - - cb_intosc_ls_clk: cb-intosc-ls-clk { - #clock-cells = <0>; - compatible = "fixed-clock"; - }; - - f2s_free_clk: f2s-free-clk { - #clock-cells = <0>; - compatible = "fixed-clock"; - }; - - osc1: osc1 { - #clock-cells = <0>; - compatible = "fixed-clock"; - }; - - qspi_clk: qspi-clk { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <200000000>; - }; - }; - gmac0: ethernet@ff800000 { compatible = "altr,socfpga-stmmac-a10-s10", "snps,dwmac-3.74a", "snps,dwmac"; reg = <0xff800000 0x2000>; - interrupts = <0 90 4>; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "macirq"; mac-address = [00 00 00 00 00 00]; resets = <&rst EMAC0_RESET>, <&rst EMAC0_OCP_RESET>; @@ -157,7 +172,7 @@ gmac1: ethernet@ff802000 { compatible = "altr,socfpga-stmmac-a10-s10", "snps,dwmac-3.74a", "snps,dwmac"; reg = <0xff802000 0x2000>; - interrupts = <0 91 4>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "macirq"; mac-address = [00 00 00 00 00 00]; resets = <&rst EMAC1_RESET>, <&rst EMAC1_OCP_RESET>; @@ -175,7 +190,7 @@ gmac2: ethernet@ff804000 { compatible = "altr,socfpga-stmmac-a10-s10", "snps,dwmac-3.74a", "snps,dwmac"; reg = <0xff804000 0x2000>; - interrupts = <0 92 4>; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "macirq"; mac-address = [00 00 00 00 00 00]; resets = <&rst EMAC2_RESET>, <&rst EMAC2_OCP_RESET>; @@ -206,7 +221,7 @@ reg = <0>; interrupt-controller; #interrupt-cells = <2>; - interrupts = <0 110 4>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; }; }; @@ -226,7 +241,7 @@ reg = <0>; interrupt-controller; #interrupt-cells = <2>; - interrupts = <0 111 4>; + interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; }; }; @@ -235,7 +250,7 @@ #size-cells = <0>; compatible = "snps,designware-i2c"; reg = <0xffc02800 0x100>; - interrupts = <0 103 4>; + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; resets = <&rst I2C0_RESET>; clocks = <&clkmgr AGILEX_L4_SP_CLK>; status = "disabled"; @@ -246,7 +261,7 @@ #size-cells = <0>; compatible = "snps,designware-i2c"; reg = <0xffc02900 0x100>; - interrupts = <0 104 4>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; resets = <&rst I2C1_RESET>; clocks = <&clkmgr AGILEX_L4_SP_CLK>; status = "disabled"; @@ -257,7 +272,7 @@ #size-cells = <0>; compatible = "snps,designware-i2c"; reg = <0xffc02a00 0x100>; - interrupts = <0 105 4>; + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; resets = <&rst I2C2_RESET>; clocks = <&clkmgr AGILEX_L4_SP_CLK>; status = "disabled"; @@ -268,7 +283,7 @@ #size-cells = <0>; compatible = "snps,designware-i2c"; reg = <0xffc02b00 0x100>; - interrupts = <0 106 4>; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; resets = <&rst I2C3_RESET>; clocks = <&clkmgr AGILEX_L4_SP_CLK>; status = "disabled"; @@ -279,7 +294,7 @@ #size-cells = <0>; compatible = "snps,designware-i2c"; reg = <0xffc02c00 0x100>; - interrupts = <0 107 4>; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; resets = <&rst I2C4_RESET>; clocks = <&clkmgr AGILEX_L4_SP_CLK>; status = "disabled"; @@ -290,7 +305,7 @@ #size-cells = <0>; compatible = "altr,socfpga-dw-mshc"; reg = <0xff808000 0x1000>; - interrupts = <0 96 4>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; fifo-depth = <0x400>; resets = <&rst SDMMC_RESET>; reset-names = "reset"; @@ -301,14 +316,14 @@ status = "disabled"; }; - nand: nand@ffb90000 { + nand: nand-controller@ffb90000 { #address-cells = <1>; #size-cells = <0>; compatible = "altr,socfpga-denali-nand"; reg = <0xffb90000 0x10000>, <0xffb80000 0x1000>; reg-names = "nand_data", "denali_reg"; - interrupts = <0 97 4>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clkmgr AGILEX_NAND_CLK>, <&clkmgr AGILEX_NAND_X_CLK>, <&clkmgr AGILEX_NAND_ECC_CLK>; @@ -325,15 +340,15 @@ pdma: pdma@ffda0000 { compatible = "arm,pl330", "arm,primecell"; reg = <0xffda0000 0x1000>; - interrupts = <0 81 4>, - <0 82 4>, - <0 83 4>, - <0 84 4>, - <0 85 4>, - <0 86 4>, - <0 87 4>, - <0 88 4>, - <0 89 4>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; #dma-cells = <1>; #dma-channels = <8>; #dma-requests = <32>; @@ -355,17 +370,43 @@ #global-interrupts = <2>; #iommu-cells = <1>; interrupt-parent = <&intc>; - interrupts = <0 128 4>, /* Global Secure Fault */ - <0 129 4>, /* Global Non-secure Fault */ + /* Global Secure Fault */ + interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, + /* Global Non-secure Fault */ + <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, /* Non-secure Context Interrupts (32) */ - <0 138 4>, <0 139 4>, <0 140 4>, <0 141 4>, - <0 142 4>, <0 143 4>, <0 144 4>, <0 145 4>, - <0 146 4>, <0 147 4>, <0 148 4>, <0 149 4>, - <0 150 4>, <0 151 4>, <0 152 4>, <0 153 4>, - <0 154 4>, <0 155 4>, <0 156 4>, <0 157 4>, - <0 158 4>, <0 159 4>, <0 160 4>, <0 161 4>, - <0 162 4>, <0 163 4>, <0 164 4>, <0 165 4>, - <0 166 4>, <0 167 4>, <0 168 4>, <0 169 4>; + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; stream-match-mask = <0x7ff0>; clocks = <&clkmgr AGILEX_MPU_CCU_CLK>, <&clkmgr AGILEX_L3_MAIN_FREE_CLK>, @@ -378,7 +419,7 @@ #address-cells = <1>; #size-cells = <0>; reg = <0xffda4000 0x1000>; - interrupts = <0 99 4>; + interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; resets = <&rst SPIM0_RESET>; reset-names = "spi"; reg-io-width = <4>; @@ -392,7 +433,7 @@ #address-cells = <1>; #size-cells = <0>; reg = <0xffda5000 0x1000>; - interrupts = <0 100 4>; + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; resets = <&rst SPIM1_RESET>; reset-names = "spi"; reg-io-width = <4>; @@ -406,18 +447,9 @@ reg = <0xffd12000 0x500>; }; - /* Local timer */ - timer { - compatible = "arm,armv8-timer"; - interrupts = <1 13 0xf08>, - <1 14 0xf08>, - <1 11 0xf08>, - <1 10 0xf08>; - }; - timer0: timer0@ffc03000 { compatible = "snps,dw-apb-timer"; - interrupts = <0 113 4>; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; reg = <0xffc03000 0x100>; clocks = <&clkmgr AGILEX_L4_SP_CLK>; clock-names = "timer"; @@ -425,7 +457,7 @@ timer1: timer1@ffc03100 { compatible = "snps,dw-apb-timer"; - interrupts = <0 114 4>; + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; reg = <0xffc03100 0x100>; clocks = <&clkmgr AGILEX_L4_SP_CLK>; clock-names = "timer"; @@ -433,7 +465,7 @@ timer2: timer2@ffd00000 { compatible = "snps,dw-apb-timer"; - interrupts = <0 115 4>; + interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>; reg = <0xffd00000 0x100>; clocks = <&clkmgr AGILEX_L4_SP_CLK>; clock-names = "timer"; @@ -441,16 +473,16 @@ timer3: timer3@ffd00100 { compatible = "snps,dw-apb-timer"; - interrupts = <0 116 4>; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; reg = <0xffd00100 0x100>; clocks = <&clkmgr AGILEX_L4_SP_CLK>; clock-names = "timer"; }; - uart0: serial0@ffc02000 { + uart0: serial@ffc02000 { compatible = "snps,dw-apb-uart"; reg = <0xffc02000 0x100>; - interrupts = <0 108 4>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; resets = <&rst UART0_RESET>; @@ -458,10 +490,10 @@ clocks = <&clkmgr AGILEX_L4_SP_CLK>; }; - uart1: serial1@ffc02100 { + uart1: serial@ffc02100 { compatible = "snps,dw-apb-uart"; reg = <0xffc02100 0x100>; - interrupts = <0 109 4>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; resets = <&rst UART1_RESET>; @@ -469,16 +501,10 @@ status = "disabled"; }; - usbphy0: usbphy@0 { - #phy-cells = <0>; - compatible = "usb-nop-xceiv"; - status = "okay"; - }; - usb0: usb@ffb00000 { compatible = "snps,dwc2"; reg = <0xffb00000 0x40000>; - interrupts = <0 93 4>; + interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; phys = <&usbphy0>; phy-names = "usb2-phy"; resets = <&rst USB0_RESET>, <&rst USB0_OCP_RESET>; @@ -491,7 +517,7 @@ usb1: usb@ffb40000 { compatible = "snps,dwc2"; reg = <0xffb40000 0x40000>; - interrupts = <0 94 4>; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; phys = <&usbphy0>; phy-names = "usb2-phy"; resets = <&rst USB1_RESET>, <&rst USB1_OCP_RESET>; @@ -504,7 +530,7 @@ watchdog0: watchdog@ffd00200 { compatible = "snps,dw-wdt"; reg = <0xffd00200 0x100>; - interrupts = <0 117 4>; + interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; resets = <&rst WATCHDOG0_RESET>; clocks = <&clkmgr AGILEX_L4_SYS_FREE_CLK>; status = "disabled"; @@ -513,7 +539,7 @@ watchdog1: watchdog@ffd00300 { compatible = "snps,dw-wdt"; reg = <0xffd00300 0x100>; - interrupts = <0 118 4>; + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; resets = <&rst WATCHDOG1_RESET>; clocks = <&clkmgr AGILEX_L4_SYS_FREE_CLK>; status = "disabled"; @@ -522,7 +548,7 @@ watchdog2: watchdog@ffd00400 { compatible = "snps,dw-wdt"; reg = <0xffd00400 0x100>; - interrupts = <0 125 4>; + interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>; resets = <&rst WATCHDOG2_RESET>; clocks = <&clkmgr AGILEX_L4_SYS_FREE_CLK>; status = "disabled"; @@ -531,7 +557,7 @@ watchdog3: watchdog@ffd00500 { compatible = "snps,dw-wdt"; reg = <0xffd00500 0x100>; - interrupts = <0 126 4>; + interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>; resets = <&rst WATCHDOG3_RESET>; clocks = <&clkmgr AGILEX_L4_SYS_FREE_CLK>; status = "disabled"; @@ -548,7 +574,7 @@ altr,sysmgr-syscon = <&sysmgr>; #address-cells = <1>; #size-cells = <1>; - interrupts = <0 15 4>; + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <2>; ranges; @@ -607,7 +633,7 @@ #size-cells = <0>; reg = <0xff8d2000 0x100>, <0xff900000 0x100000>; - interrupts = <0 3 4>; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; cdns,fifo-depth = <128>; cdns,fifo-width = <4>; cdns,trigger-address = <0x00000000>; diff --git a/dts/src/arm64/intel/socfpga_agilex_socdk.dts b/dts/src/arm64/intel/socfpga_agilex_socdk.dts index a7a83f29f0..0f7a0ba344 100644 --- a/dts/src/arm64/intel/socfpga_agilex_socdk.dts +++ b/dts/src/arm64/intel/socfpga_agilex_socdk.dts @@ -41,14 +41,6 @@ /* We expect the bootloader to fill in the reg */ reg = <0 0 0 0>; }; - - soc { - clocks { - osc1 { - clock-frequency = <25000000>; - }; - }; - }; }; &gpio1 { @@ -92,6 +84,10 @@ bus-width = <4>; }; +&osc1 { + clock-frequency = <25000000>; +}; + &uart0 { status = "okay"; }; @@ -117,7 +113,7 @@ m25p,fast-read; cdns,page-size = <256>; cdns,block-size = <16>; - cdns,read-delay = <1>; + cdns,read-delay = <2>; cdns,tshsl-ns = <50>; cdns,tsd2d-ns = <50>; cdns,tchsh-ns = <4>; diff --git a/dts/src/arm64/intel/socfpga_agilex_socdk_nand.dts b/dts/src/arm64/intel/socfpga_agilex_socdk_nand.dts index 979aa59a6b..cc2dcabf34 100644 --- a/dts/src/arm64/intel/socfpga_agilex_socdk_nand.dts +++ b/dts/src/arm64/intel/socfpga_agilex_socdk_nand.dts @@ -20,17 +20,17 @@ leds { compatible = "gpio-leds"; - hps0 { + led0 { label = "hps_led0"; gpios = <&portb 20 GPIO_ACTIVE_HIGH>; }; - hps1 { + led1 { label = "hps_led1"; gpios = <&portb 19 GPIO_ACTIVE_HIGH>; }; - hps2 { + led2 { label = "hps_led2"; gpios = <&portb 21 GPIO_ACTIVE_HIGH>; }; @@ -41,14 +41,6 @@ /* We expect the bootloader to fill in the reg */ reg = <0 0 0 0>; }; - - soc { - clocks { - osc1 { - clock-frequency = <25000000>; - }; - }; - }; }; &gpio1 { @@ -121,6 +113,10 @@ }; }; +&osc1 { + clock-frequency = <25000000>; +}; + &uart0 { status = "okay"; }; diff --git a/dts/src/arm64/intel/socfpga_n5x_socdk.dts b/dts/src/arm64/intel/socfpga_n5x_socdk.dts index 5f56e2697f..01f1307ce4 100644 --- a/dts/src/arm64/intel/socfpga_n5x_socdk.dts +++ b/dts/src/arm64/intel/socfpga_n5x_socdk.dts @@ -23,14 +23,6 @@ /* We expect the bootloader to fill in the reg */ reg = <0 0 0 0>; }; - - soc { - clocks { - osc1 { - clock-frequency = <25000000>; - }; - }; - }; }; &clkmgr { @@ -44,6 +36,10 @@ bus-width = <4>; }; +&osc1 { + clock-frequency = <25000000>; +}; + &uart0 { status = "okay"; }; diff --git a/dts/src/arm64/marvell/armada-37xx.dtsi b/dts/src/arm64/marvell/armada-37xx.dtsi index 7a2df148c6..456dcd4a77 100644 --- a/dts/src/arm64/marvell/armada-37xx.dtsi +++ b/dts/src/arm64/marvell/armada-37xx.dtsi @@ -156,7 +156,8 @@ }; nb_periph_clk: nb-periph-clk@13000 { - compatible = "marvell,armada-3700-periph-clock-nb"; + compatible = "marvell,armada-3700-periph-clock-nb", + "syscon"; reg = <0x13000 0x100>; clocks = <&tbg 0>, <&tbg 1>, <&tbg 2>, <&tbg 3>, <&xtalclk>; diff --git a/dts/src/arm64/marvell/armada-7040-db.dts b/dts/src/arm64/marvell/armada-7040-db.dts index a7eb4e7697..51f3e29075 100644 --- a/dts/src/arm64/marvell/armada-7040-db.dts +++ b/dts/src/arm64/marvell/armada-7040-db.dts @@ -218,6 +218,10 @@ }; }; +&cp0_utmi { + status = "okay"; +}; + &cp0_comphy1 { cp0_usbh0_con: connector { compatible = "usb-a-connector"; @@ -226,8 +230,9 @@ }; &cp0_usb3_0 { - phys = <&cp0_comphy1 0>; - phy-names = "cp0-usb3h0-comphy"; + phys = <&cp0_comphy1 0>, <&cp0_utmi0>; + phy-names = "cp0-usb3h0-comphy", "utmi"; + dr_mode = "host"; status = "okay"; }; @@ -239,8 +244,9 @@ }; &cp0_usb3_1 { - phys = <&cp0_comphy4 1>; - phy-names = "cp0-usb3h1-comphy"; + phys = <&cp0_comphy4 1>, <&cp0_utmi1>; + phy-names = "cp0-usb3h1-comphy", "utmi"; + dr_mode = "host"; status = "okay"; }; diff --git a/dts/src/arm64/marvell/armada-8040-clearfog-gt-8k.dts b/dts/src/arm64/marvell/armada-8040-clearfog-gt-8k.dts index eb01cc96ba..0ec0d56258 100644 --- a/dts/src/arm64/marvell/armada-8040-clearfog-gt-8k.dts +++ b/dts/src/arm64/marvell/armada-8040-clearfog-gt-8k.dts @@ -31,6 +31,16 @@ ethernet2 = &cp1_eth2; }; + fan: pwm { + compatible = "pwm-fan"; + /* 20% steps */ + cooling-levels = <0 51 102 153 204 255>; + #cooling-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&cp0_fan_pwm_pins>; + pwms = <&cp0_gpio2 16 40000>; + }; + v_3_3: regulator-3-3v { compatible = "regulator-fixed"; regulator-name = "v_3_3"; @@ -102,6 +112,123 @@ }; }; +&ap_thermal_ic { + polling-delay = <1000>; /* milliseconds */ + trips { + ap_active: trip-active { + temperature = <40000>; /* millicelsius */ + hysteresis = <4000>; /* millicelsius */ + type = "active"; + }; + }; + cooling-maps { + map0 { + trip = <&ap_active>; + cooling-device = <&fan THERMAL_NO_LIMIT 4>; + }; + map1 { + trip = <&ap_crit>; + cooling-device = <&fan 4 5>; + }; + }; +}; + +&cp0_thermal_ic { + polling-delay = <1000>; /* milliseconds */ + trips { + cp0_active0: trip-active0 { + temperature = <40000>; /* millicelsius */ + hysteresis = <2500>; /* millicelsius */ + type = "active"; + }; + cp0_active1: trip-active1 { + temperature = <45000>; /* millicelsius */ + hysteresis = <2500>; /* millicelsius */ + type = "active"; + }; + cp0_active2: trip-active2 { + temperature = <50000>; /* millicelsius */ + hysteresis = <2500>; /* millicelsius */ + type = "active"; + }; + cp0_active3: trip-active3 { + temperature = <60000>; /* millicelsius */ + hysteresis = <2500>; /* millicelsius */ + type = "active"; + }; + }; + cooling-maps { + map0 { + trip = <&cp0_active0>; + cooling-device = <&fan 0 1>; + }; + map1 { + trip = <&cp0_active1>; + cooling-device = <&fan 1 2>; + }; + map2 { + trip = <&cp0_active2>; + cooling-device = <&fan 2 3>; + }; + map3 { + trip = <&cp0_active3>; + cooling-device = <&fan 3 4>; + }; + map4 { + trip = <&cp0_crit>; + cooling-device = <&fan 4 5>; + }; + }; +}; + +&cp1_thermal_ic { + polling-delay = <1000>; /* milliseconds */ + trips { + cp1_active0: trip-active0 { + temperature = <40000>; /* millicelsius */ + hysteresis = <2500>; /* millicelsius */ + type = "active"; + }; + cp1_active1: trip-active1 { + temperature = <45000>; /* millicelsius */ + hysteresis = <2500>; /* millicelsius */ + type = "active"; + }; + cp1_active2: trip-active2 { + temperature = <50000>; /* millicelsius */ + hysteresis = <2500>; /* millicelsius */ + type = "active"; + }; + cp1_active3: trip-active3 { + temperature = <60000>; /* millicelsius */ + hysteresis = <2500>; /* millicelsius */ + type = "active"; + }; + }; + cooling-maps { + map0 { + trip = <&cp1_active0>; + cooling-device = <&fan 0 1>; + }; + map1 { + trip = <&cp1_active1>; + cooling-device = <&fan 1 2>; + }; + map2 { + trip = <&cp1_active2>; + cooling-device = <&fan 2 3>; + }; + map3 { + trip = <&cp1_active3>; + cooling-device = <&fan 3 4>; + }; + map4 { + trip = <&cp1_crit>; + cooling-device = <&fan 4 5>; + }; + }; +}; + &uart0 { status = "okay"; pinctrl-0 = <&uart0_pins>; diff --git a/dts/src/arm64/marvell/armada-8040-db.dts b/dts/src/arm64/marvell/armada-8040-db.dts index 09fb5256f1..e39e1efc95 100644 --- a/dts/src/arm64/marvell/armada-8040-db.dts +++ b/dts/src/arm64/marvell/armada-8040-db.dts @@ -154,8 +154,15 @@ }; /* CON9 on CP0 expansion */ +&cp0_utmi { + status = "okay"; +}; + &cp0_usb3_0 { usb-phy = <&cp0_usb3_0_phy>; + phys = <&cp0_utmi0>; + phy-names = "utmi"; + dr_mode = "host"; status = "okay"; }; @@ -168,8 +175,9 @@ /* CON10 on CP0 expansion */ &cp0_usb3_1 { - phys = <&cp0_comphy4 1>; - phy-names = "cp0-usb3h1-comphy"; + phys = <&cp0_comphy4 1>, <&cp0_utmi1>; + phy-names = "usb", "utmi"; + dr_mode = "host"; status = "okay"; }; @@ -306,14 +314,23 @@ }; }; +&cp1_utmi { + status = "okay"; +}; + /* CON9 on CP1 expansion */ &cp1_usb3_0 { usb-phy = <&cp1_usb3_0_phy>; + phys = <&cp1_utmi0>; + phy-names = "utmi"; + dr_mode = "host"; status = "okay"; }; /* CON10 on CP1 expansion */ &cp1_usb3_1 { + phys = <&cp1_utmi1>; + phy-names = "utmi"; status = "okay"; }; diff --git a/dts/src/arm64/marvell/armada-8040-mcbin.dtsi b/dts/src/arm64/marvell/armada-8040-mcbin.dtsi index cbcb210cb6..adbfecc678 100644 --- a/dts/src/arm64/marvell/armada-8040-mcbin.dtsi +++ b/dts/src/arm64/marvell/armada-8040-mcbin.dtsi @@ -259,13 +259,23 @@ vqmmc-supply = <&v_3_3>; }; +&cp0_utmi { + status = "okay"; +}; + &cp0_usb3_0 { /* J38? - USB2.0 only */ + phys = <&cp0_utmi0>; + phy-names = "utmi"; + dr_mode = "host"; status = "okay"; }; &cp0_usb3_1 { /* J38? - USB2.0 only */ + phys = <&cp0_utmi1>; + phy-names = "utmi"; + dr_mode = "host"; status = "okay"; }; @@ -364,9 +374,14 @@ }; }; +&cp1_utmi { + status = "okay"; +}; + &cp1_usb3_0 { /* CPS Lane 2 - CON7 */ - phys = <&cp1_comphy2 0>; - phy-names = "cp1-usb3h0-comphy"; + phys = <&cp1_comphy2 0>, <&cp1_utmi0>; + phy-names = "cp1-usb3h0-comphy", "utmi"; + dr_mode = "host"; status = "okay"; }; diff --git a/dts/src/arm64/marvell/armada-cp11x.dtsi b/dts/src/arm64/marvell/armada-cp11x.dtsi index c6f5df2dec..3bd2182817 100644 --- a/dts/src/arm64/marvell/armada-cp11x.dtsi +++ b/dts/src/arm64/marvell/armada-cp11x.dtsi @@ -285,6 +285,25 @@ }; }; + CP11X_LABEL(utmi): utmi@580000 { + compatible = "marvell,cp110-utmi-phy"; + reg = <0x580000 0x2000>; + marvell,system-controller = <&CP11X_LABEL(syscon0)>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + CP11X_LABEL(utmi0): usb-phy@0 { + reg = <0>; + #phy-cells = <0>; + }; + + CP11X_LABEL(utmi1): usb-phy@1 { + reg = <1>; + #phy-cells = <0>; + }; + }; + CP11X_LABEL(usb3_0): usb@500000 { compatible = "marvell,armada-8k-xhci", "generic-xhci"; diff --git a/dts/src/arm64/marvell/cn9130-db.dts b/dts/src/arm64/marvell/cn9130-db.dts index 79020e6d27..2c2af00161 100644 --- a/dts/src/arm64/marvell/cn9130-db.dts +++ b/dts/src/arm64/marvell/cn9130-db.dts @@ -392,14 +392,22 @@ }; }; +&cp0_utmi { + status = "okay"; +}; + &cp0_usb3_0 { status = "okay"; usb-phy = <&cp0_usb3_0_phy0>; - phy-names = "usb"; + phys = <&cp0_utmi0>; + phy-names = "utmi"; + dr_mode = "host"; }; &cp0_usb3_1 { status = "okay"; usb-phy = <&cp0_usb3_0_phy1>; - phy-names = "usb"; + phys = <&cp0_utmi1>; + phy-names = "utmi"; + dr_mode = "host"; }; diff --git a/dts/src/arm64/marvell/cn9131-db.dts b/dts/src/arm64/marvell/cn9131-db.dts index 3c975f98b2..ba2d4e1da1 100644 --- a/dts/src/arm64/marvell/cn9131-db.dts +++ b/dts/src/arm64/marvell/cn9131-db.dts @@ -193,10 +193,15 @@ }; /* CON58 */ +&cp1_utmi { + status = "okay"; +}; + &cp1_usb3_1 { status = "okay"; usb-phy = <&cp1_usb3_0_phy0>; /* Generic PHY, providing serdes lanes */ - phys = <&cp1_comphy3 1>; - phy-names = "usb"; + phys = <&cp1_comphy3 1>, <&cp1_utmi1>; + phy-names = "usb", "utmi"; + dr_mode = "host"; }; diff --git a/dts/src/arm64/marvell/cn9132-db.dts b/dts/src/arm64/marvell/cn9132-db.dts index 4ef0df3097..81fba024b2 100644 --- a/dts/src/arm64/marvell/cn9132-db.dts +++ b/dts/src/arm64/marvell/cn9132-db.dts @@ -205,17 +205,24 @@ }; }; +&cp2_utmi { + status = "okay"; +}; + &cp2_usb3_0 { status = "okay"; usb-phy = <&cp2_usb3_0_phy0>; + phys = <&cp2_utmi0>; phy-names = "usb"; + dr_mode = "host"; }; /* SLM-1521-V2, CON11 */ &cp2_usb3_1 { status = "okay"; usb-phy = <&cp2_usb3_0_phy1>; - phy-names = "usb"; /* Generic PHY, providing serdes lanes */ - phys = <&cp2_comphy3 1>; + phys = <&cp2_comphy3 1>, <&cp2_utmi1>; + phy-names = "usb", "utmi"; + dr_mode = "host"; }; diff --git a/dts/src/arm64/mediatek/mt2712e.dtsi b/dts/src/arm64/mediatek/mt2712e.dtsi index db17d0a4ed..a9cca9c146 100644 --- a/dts/src/arm64/mediatek/mt2712e.dtsi +++ b/dts/src/arm64/mediatek/mt2712e.dtsi @@ -805,7 +805,7 @@ ranges; status = "disabled"; - usb_host0: xhci@11270000 { + usb_host0: usb@11270000 { compatible = "mediatek,mt2712-xhci", "mediatek,mtk-xhci"; reg = <0 0x11270000 0 0x1000>; @@ -818,7 +818,7 @@ }; }; - u3phy0: usb-phy@11290000 { + u3phy0: t-phy@11290000 { compatible = "mediatek,mt2712-tphy", "mediatek,generic-tphy-v2"; #address-cells = <1>; @@ -869,7 +869,7 @@ ranges; status = "disabled"; - usb_host1: xhci@112c0000 { + usb_host1: usb@112c0000 { compatible = "mediatek,mt2712-xhci", "mediatek,mtk-xhci"; reg = <0 0x112c0000 0 0x1000>; @@ -882,7 +882,7 @@ }; }; - u3phy1: usb-phy@112e0000 { + u3phy1: t-phy@112e0000 { compatible = "mediatek,mt2712-tphy", "mediatek,generic-tphy-v2"; #address-cells = <1>; diff --git a/dts/src/arm64/mediatek/mt7622-rfb1.dts b/dts/src/arm64/mediatek/mt7622-rfb1.dts index 08ad0ffb24..f2dc850010 100644 --- a/dts/src/arm64/mediatek/mt7622-rfb1.dts +++ b/dts/src/arm64/mediatek/mt7622-rfb1.dts @@ -495,6 +495,16 @@ groups = "watchdog"; }; }; + + wmac_pins: wmac-pins { + mux { + function = "antsel"; + groups = "antsel0", "antsel1", "antsel2", "antsel3", + "antsel4", "antsel5", "antsel6", "antsel7", + "antsel8", "antsel9", "antsel12", "antsel13", + "antsel14", "antsel15", "antsel16", "antsel17"; + }; + }; }; &pwm { @@ -559,5 +569,7 @@ }; &wmac { + pinctrl-names = "default"; + pinctrl-0 = <&wmac_pins>; status = "okay"; }; diff --git a/dts/src/arm64/mediatek/mt7622.dtsi b/dts/src/arm64/mediatek/mt7622.dtsi index 7c6d871538..890a942ec6 100644 --- a/dts/src/arm64/mediatek/mt7622.dtsi +++ b/dts/src/arm64/mediatek/mt7622.dtsi @@ -742,8 +742,8 @@ status = "disabled"; }; - u3phy: usb-phy@1a0c4000 { - compatible = "mediatek,mt7622-u3phy", + u3phy: t-phy@1a0c4000 { + compatible = "mediatek,mt7622-tphy", "mediatek,generic-tphy-v1"; reg = <0 0x1a0c4000 0 0x700>; #address-cells = <2>; @@ -877,8 +877,9 @@ status = "disabled"; }; - sata_phy: sata-phy@1a243000 { - compatible = "mediatek,generic-tphy-v1"; + sata_phy: t-phy@1a243000 { + compatible = "mediatek,mt7622-tphy", + "mediatek,generic-tphy-v1"; #address-cells = <2>; #size-cells = <2>; ranges; diff --git a/dts/src/arm64/mediatek/mt8173-evb.dts b/dts/src/arm64/mediatek/mt8173-evb.dts index 6dffada2e6..f6a1738dfb 100644 --- a/dts/src/arm64/mediatek/mt8173-evb.dts +++ b/dts/src/arm64/mediatek/mt8173-evb.dts @@ -294,7 +294,7 @@ &pwrap { /* Only MT8173 E1 needs USB power domain */ - power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>; + power-domains = <&spm MT8173_POWER_DOMAIN_USB>; pmic: mt6397 { compatible = "mediatek,mt6397"; @@ -516,10 +516,8 @@ extcon = <&extcon_usb>; dr_mode = "otg"; wakeup-source; - pinctrl-names = "default", "id_float", "id_ground"; + pinctrl-names = "default"; pinctrl-0 = <&usb_id_pins_float>; - pinctrl-1 = <&usb_id_pins_float>; - pinctrl-2 = <&usb_id_pins_ground>; status = "okay"; }; diff --git a/dts/src/arm64/mediatek/mt8173.dtsi b/dts/src/arm64/mediatek/mt8173.dtsi index 7fa870e438..003a5653c5 100644 --- a/dts/src/arm64/mediatek/mt8173.dtsi +++ b/dts/src/arm64/mediatek/mt8173.dtsi @@ -631,7 +631,7 @@ #mbox-cells = <2>; }; - mipi_tx0: mipi-dphy@10215000 { + mipi_tx0: dsi-phy@10215000 { compatible = "mediatek,mt8173-mipi-tx"; reg = <0 0x10215000 0 0x1000>; clocks = <&clk26m>; @@ -641,7 +641,7 @@ status = "disabled"; }; - mipi_tx1: mipi-dphy@10216000 { + mipi_tx1: dsi-phy@10216000 { compatible = "mediatek,mt8173-mipi-tx"; reg = <0 0x10216000 0 0x1000>; clocks = <&clk26m>; @@ -926,7 +926,7 @@ }; ssusb: usb@11271000 { - compatible = "mediatek,mt8173-mtu3"; + compatible = "mediatek,mt8173-mtu3", "mediatek,mtu3"; reg = <0 0x11271000 0 0x3000>, <0 0x11280700 0 0x0100>; reg-names = "mac", "ippc"; @@ -943,8 +943,9 @@ ranges; status = "disabled"; - usb_host: xhci@11270000 { - compatible = "mediatek,mt8173-xhci"; + usb_host: usb@11270000 { + compatible = "mediatek,mt8173-xhci", + "mediatek,mtk-xhci"; reg = <0 0x11270000 0 0x1000>; reg-names = "mac"; interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>; @@ -955,7 +956,7 @@ }; }; - u3phy: usb-phy@11290000 { + u3phy: t-phy@11290000 { compatible = "mediatek,mt8173-u3phy"; reg = <0 0x11290000 0 0x800>; #address-cells = <2>; @@ -1235,7 +1236,7 @@ <&mmsys CLK_MM_DSI1_DIGITAL>, <&mipi_tx1>; clock-names = "engine", "digital", "hs"; - phy = <&mipi_tx1>; + phys = <&mipi_tx1>; phy-names = "dphy"; status = "disabled"; }; diff --git a/dts/src/arm64/mediatek/mt8183-evb.dts b/dts/src/arm64/mediatek/mt8183-evb.dts index 3249c959f7..edff1e03e6 100644 --- a/dts/src/arm64/mediatek/mt8183-evb.dts +++ b/dts/src/arm64/mediatek/mt8183-evb.dts @@ -352,6 +352,10 @@ }; }; +&mfg { + domain-supply = <&mt6358_vgpu_reg>; +}; + &spi0 { pinctrl-names = "default"; pinctrl-0 = <&spi_pins_0>; diff --git a/dts/src/arm64/mediatek/mt8183-kukui-jacuzzi-damu.dts b/dts/src/arm64/mediatek/mt8183-kukui-jacuzzi-damu.dts new file mode 100644 index 0000000000..42ba9c0086 --- /dev/null +++ b/dts/src/arm64/mediatek/mt8183-kukui-jacuzzi-damu.dts @@ -0,0 +1,31 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2021 Google LLC + */ + +/dts-v1/; +#include "mt8183-kukui-jacuzzi.dtsi" + +/ { + model = "Google damu board"; + compatible = "google,damu", "mediatek,mt8183"; +}; + +&touchscreen { + status = "okay"; + + compatible = "hid-over-i2c"; + reg = <0x10>; + interrupt-parent = <&pio>; + interrupts = <155 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&touchscreen_pins>; + + post-power-on-delay-ms = <10>; + hid-descr-addr = <0x0001>; +}; + +&qca_wifi { + qcom,ath10k-calibration-variant = "GO_DAMU"; +}; + diff --git a/dts/src/arm64/mediatek/mt8183-kukui-jacuzzi-juniper-sku16.dts b/dts/src/arm64/mediatek/mt8183-kukui-jacuzzi-juniper-sku16.dts new file mode 100644 index 0000000000..36d2c3b3ca --- /dev/null +++ b/dts/src/arm64/mediatek/mt8183-kukui-jacuzzi-juniper-sku16.dts @@ -0,0 +1,13 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2021 Google LLC + */ + +/dts-v1/; +#include "mt8183-kukui-jacuzzi-juniper.dtsi" + +/ { + model = "Google juniper sku16 board"; + compatible = "google,juniper-sku16", "google,juniper", "mediatek,mt8183"; +}; + diff --git a/dts/src/arm64/mediatek/mt8183-kukui-jacuzzi-juniper.dtsi b/dts/src/arm64/mediatek/mt8183-kukui-jacuzzi-juniper.dtsi new file mode 100644 index 0000000000..078bc76564 --- /dev/null +++ b/dts/src/arm64/mediatek/mt8183-kukui-jacuzzi-juniper.dtsi @@ -0,0 +1,27 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2021 Google LLC + */ + +/dts-v1/; +#include "mt8183-kukui-jacuzzi.dtsi" + +&i2c2 { + trackpad@2c { + compatible = "hid-over-i2c"; + reg = <0x2c>; + hid-descr-addr = <0x20>; + + pinctrl-names = "default"; + pinctrl-0 = <&trackpad_pins>; + + interrupts-extended = <&pio 7 IRQ_TYPE_LEVEL_LOW>; + + wakeup-source; + }; +}; + +&qca_wifi { + qcom,ath10k-calibration-variant = "GO_JUNIPER"; +}; + diff --git a/dts/src/arm64/mediatek/mt8183-kukui-jacuzzi.dtsi b/dts/src/arm64/mediatek/mt8183-kukui-jacuzzi.dtsi new file mode 100644 index 0000000000..4049dff846 --- /dev/null +++ b/dts/src/arm64/mediatek/mt8183-kukui-jacuzzi.dtsi @@ -0,0 +1,474 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2021 Google LLC + */ + +#include "mt8183-kukui.dtsi" + +/ { + panel: panel { + compatible = "auo,b116xw03"; + power-supply = <&pp3300_panel>; + ddc-i2c-bus = <&i2c4>; + backlight = <&backlight_lcd0>; + + port { + panel_in: endpoint { + remote-endpoint = <&anx7625_out>; + }; + }; + }; + + pp1200_mipibrdg: pp1200-mipibrdg { + compatible = "regulator-fixed"; + regulator-name = "pp1200_mipibrdg"; + pinctrl-names = "default"; + pinctrl-0 = <&pp1200_mipibrdg_en>; + + enable-active-high; + regulator-boot-on; + + gpio = <&pio 54 GPIO_ACTIVE_HIGH>; + }; + + pp1800_mipibrdg: pp1800-mipibrdg { + compatible = "regulator-fixed"; + regulator-name = "pp1800_mipibrdg"; + pinctrl-names = "default"; + pinctrl-0 = <&pp1800_lcd_en>; + + enable-active-high; + regulator-boot-on; + + gpio = <&pio 36 GPIO_ACTIVE_HIGH>; + }; + + pp3300_panel: pp3300-panel { + compatible = "regulator-fixed"; + regulator-name = "pp3300_panel"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + pinctrl-names = "default"; + pinctrl-0 = <&pp3300_panel_pins>; + + enable-active-high; + regulator-boot-on; + + gpio = <&pio 35 GPIO_ACTIVE_HIGH>; + }; + + vddio_mipibrdg: vddio-mipibrdg { + compatible = "regulator-fixed"; + regulator-name = "vddio_mipibrdg"; + pinctrl-names = "default"; + pinctrl-0 = <&vddio_mipibrdg_en>; + + enable-active-high; + regulator-boot-on; + + gpio = <&pio 37 GPIO_ACTIVE_HIGH>; + }; + + volume_buttons: volume-buttons { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&volume_button_pins>; + + volume_down { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + debounce-interval = <100>; + + gpios = <&pio 6 GPIO_ACTIVE_LOW>; + }; + + volume_up { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + debounce-interval = <100>; + + gpios = <&pio 5 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&dsi0 { + status = "okay"; + /delete-node/panel@0; + ports { + port { + dsi_out: endpoint { + remote-endpoint = <&anx7625_in>; + }; + }; + }; +}; + +&i2c0 { + status = "okay"; + + touchscreen: touchscreen@10 { + compatible = "elan,ekth3500"; + reg = <0x10>; + + pinctrl-names = "default"; + pinctrl-0 = <&touchscreen_pins>; + + interrupts-extended = <&pio 155 IRQ_TYPE_LEVEL_LOW>; + + reset-gpios = <&pio 156 GPIO_ACTIVE_LOW>; + }; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + status = "okay"; + clock-frequency = <400000>; + + trackpad@15 { + compatible = "elan,ekth3000"; + reg = <0x15>; + + pinctrl-names = "default"; + pinctrl-0 = <&trackpad_pins>; + + interrupts-extended = <&pio 7 IRQ_TYPE_LEVEL_LOW>; + + wakeup-source; + }; +}; + +&i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_pins>; + status = "okay"; + clock-frequency = <100000>; + + anx_bridge: anx7625@58 { + compatible = "analogix,anx7625"; + reg = <0x58>; + pinctrl-names = "default"; + pinctrl-0 = <&anx7625_pins>; + panel_flags = <1>; + enable-gpios = <&pio 45 GPIO_ACTIVE_HIGH>; + reset-gpios = <&pio 73 GPIO_ACTIVE_HIGH>; + vdd10-supply = <&pp1200_mipibrdg>; + vdd18-supply = <&pp1800_mipibrdg>; + vdd33-supply = <&vddio_mipibrdg>; + + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + + anx7625_in: endpoint { + remote-endpoint = <&dsi_out>; + }; + }; + + port@1 { + reg = <1>; + + anx7625_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; +}; + +&i2c_tunnel { + google,remote-bus = <2>; +}; + +&pio { + /* 192 lines */ + gpio-line-names = + "SPI_AP_EC_CS_L", + "SPI_AP_EC_MOSI", + "SPI_AP_EC_CLK", + "I2S3_DO", + "USB_PD_INT_ODL", + "", + "", + "", + "", + "IT6505_HPD_L", + "I2S3_TDM_D3", + "SOC_I2C6_1V8_SCL", + "SOC_I2C6_1V8_SDA", + "DPI_D0", + "DPI_D1", + "DPI_D2", + "DPI_D3", + "DPI_D4", + "DPI_D5", + "DPI_D6", + "DPI_D7", + "DPI_D8", + "DPI_D9", + "DPI_D10", + "DPI_D11", + "DPI_HSYNC", + "DPI_VSYNC", + "DPI_DE", + "DPI_CK", + "AP_MSDC1_CLK", + "AP_MSDC1_DAT3", + "AP_MSDC1_CMD", + "AP_MSDC1_DAT0", + "AP_MSDC1_DAT2", + "AP_MSDC1_DAT1", + "", + "", + "", + "", + "", + "", + "OTG_EN", + "DRVBUS", + "DISP_PWM", + "DSI_TE", + "LCM_RST_1V8", + "AP_CTS_WIFI_RTS", + "AP_RTS_WIFI_CTS", + "SOC_I2C5_1V8_SCL", + "SOC_I2C5_1V8_SDA", + "SOC_I2C3_1V8_SCL", + "SOC_I2C3_1V8_SDA", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "SOC_I2C1_1V8_SDA", + "SOC_I2C0_1V8_SDA", + "SOC_I2C0_1V8_SCL", + "SOC_I2C1_1V8_SCL", + "AP_SPI_H1_MISO", + "AP_SPI_H1_CS_L", + "AP_SPI_H1_MOSI", + "AP_SPI_H1_CLK", + "I2S5_BCK", + "I2S5_LRCK", + "I2S5_DO", + "BOOTBLOCK_EN_L", + "MT8183_KPCOL0", + "SPI_AP_EC_MISO", + "UART_DBG_TX_AP_RX", + "UART_AP_TX_DBG_RX", + "I2S2_MCK", + "I2S2_BCK", + "CLK_5M_WCAM", + "CLK_2M_UCAM", + "I2S2_LRCK", + "I2S2_DI", + "SOC_I2C2_1V8_SCL", + "SOC_I2C2_1V8_SDA", + "SOC_I2C4_1V8_SCL", + "SOC_I2C4_1V8_SDA", + "", + "SCL8", + "SDA8", + "FCAM_PWDN_L", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "I2S_PMIC", + "I2S_PMIC", + "I2S_PMIC", + "I2S_PMIC", + "I2S_PMIC", + "I2S_PMIC", + "I2S_PMIC", + "I2S_PMIC", + "", + "", + "", + "", + "", + "", + /* + * AP_FLASH_WP_L is crossystem ABI. Rev1 schematics + * call it BIOS_FLASH_WP_R_L. + */ + "AP_FLASH_WP_L", + "EC_AP_INT_ODL", + "IT6505_INT_ODL", + "H1_INT_OD_L", + "", + "", + "", + "", + "", + "", + "", + "AP_SPI_FLASH_MISO", + "AP_SPI_FLASH_CS_L", + "AP_SPI_FLASH_MOSI", + "AP_SPI_FLASH_CLK", + "DA7219_IRQ", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + ""; + + pp1200_mipibrdg_en: pp1200-mipibrdg-en { + pins1 { + pinmux = <PINMUX_GPIO54__FUNC_GPIO54>; + output-low; + }; + }; + + pp1800_lcd_en: pp1800-lcd-en { + pins1 { + pinmux = <PINMUX_GPIO36__FUNC_GPIO36>; + output-low; + }; + }; + + pp3300_panel_pins: pp3300-panel-pins { + panel_3v3_enable: panel-3v3-enable { + pinmux = <PINMUX_GPIO35__FUNC_GPIO35>; + output-low; + }; + }; + + ppvarp_lcd_en: ppvarp-lcd-en { + pins1 { + pinmux = <PINMUX_GPIO66__FUNC_GPIO66>; + output-low; + }; + }; + + ppvarn_lcd_en: ppvarn-lcd-en { + pins1 { + pinmux = <PINMUX_GPIO166__FUNC_GPIO166>; + output-low; + }; + }; + + anx7625_pins: anx7625-pins { + pins1 { + pinmux = <PINMUX_GPIO45__FUNC_GPIO45>, + <PINMUX_GPIO73__FUNC_GPIO73>; + output-low; + }; + pins2 { + pinmux = <PINMUX_GPIO4__FUNC_GPIO4>; + input-enable; + bias-pull-up; + }; + }; + + touchscreen_pins: touchscreen-pins { + touch_int_odl { + pinmux = <PINMUX_GPIO155__FUNC_GPIO155>; + input-enable; + bias-pull-up; + }; + + touch_rst_l { + pinmux = <PINMUX_GPIO156__FUNC_GPIO156>; + output-high; + }; + }; + + trackpad_pins: trackpad-pins { + trackpad_int { + pinmux = <PINMUX_GPIO7__FUNC_GPIO7>; + input-enable; + bias-disable; /* pulled externally */ + }; + }; + + vddio_mipibrdg_en: vddio-mipibrdg-en { + pins1 { + pinmux = <PINMUX_GPIO37__FUNC_GPIO37>; + output-low; + }; + }; + + volume_button_pins: volume-button-pins { + voldn-btn-odl { + pinmux = <PINMUX_GPIO6__FUNC_GPIO6>; + input-enable; + bias-pull-up; + }; + + volup-btn-odl { + pinmux = <PINMUX_GPIO5__FUNC_GPIO5>; + input-enable; + bias-pull-up; + }; + }; +}; + diff --git a/dts/src/arm64/mediatek/mt8183-kukui-kakadu.dts b/dts/src/arm64/mediatek/mt8183-kukui-kakadu.dts new file mode 100644 index 0000000000..20eb0dc68f --- /dev/null +++ b/dts/src/arm64/mediatek/mt8183-kukui-kakadu.dts @@ -0,0 +1,13 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2020 Google LLC + */ + +/dts-v1/; +#include "mt8183-kukui-kakadu.dtsi" + +/ { + model = "MediaTek kakadu board"; + compatible = "google,kakadu-rev3", "google,kakadu-rev2", + "google,kakadu", "mediatek,mt8183"; +}; diff --git a/dts/src/arm64/mediatek/mt8183-kukui-kakadu.dtsi b/dts/src/arm64/mediatek/mt8183-kukui-kakadu.dtsi new file mode 100644 index 0000000000..b442e38a31 --- /dev/null +++ b/dts/src/arm64/mediatek/mt8183-kukui-kakadu.dtsi @@ -0,0 +1,378 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2020 Google LLC + */ + +#include "mt8183-kukui.dtsi" +#include <dt-bindings/input/gpio-keys.h> + +/ { + ppvarn_lcd: ppvarn-lcd { + compatible = "regulator-fixed"; + regulator-name = "ppvarn_lcd"; + pinctrl-names = "default"; + pinctrl-0 = <&ppvarn_lcd_en>; + + enable-active-high; + + gpio = <&pio 66 GPIO_ACTIVE_HIGH>; + }; + + ppvarp_lcd: ppvarp-lcd { + compatible = "regulator-fixed"; + regulator-name = "ppvarp_lcd"; + pinctrl-names = "default"; + pinctrl-0 = <&ppvarp_lcd_en>; + + enable-active-high; + + gpio = <&pio 166 GPIO_ACTIVE_HIGH>; + }; + + pp1800_lcd: pp1800-lcd { + compatible = "regulator-fixed"; + regulator-name = "pp1800_lcd"; + pinctrl-names = "default"; + pinctrl-0 = <&pp1800_lcd_en>; + + enable-active-high; + + gpio = <&pio 36 GPIO_ACTIVE_HIGH>; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pen_eject>; + + pen-insert { + label = "Pen Insert"; + /* Insert = low, eject = high */ + gpios = <&pio 6 GPIO_ACTIVE_LOW>; + linux,code = <SW_PEN_INSERTED>; + linux,input-type = <EV_SW>; + wakeup-event-action = <EV_ACT_DEASSERTED>; + wakeup-source; + }; + }; +}; + +&bluetooth { + firmware-name = "nvm_00440302_i2s_eu.bin"; +}; + +&i2c0 { + status = "okay"; + + touchscreen: touchscreen@10 { + compatible = "hid-over-i2c"; + reg = <0x10>; + pinctrl-names = "default"; + pinctrl-0 = <&open_touch>; + + interrupt-parent = <&pio>; + interrupts = <155 IRQ_TYPE_EDGE_FALLING>; + + post-power-on-delay-ms = <10>; + hid-descr-addr = <0x0001>; + }; +}; + +&mt6358_vcama2_reg { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + status = "okay"; + clock-frequency = <400000>; + + eeprom@58 { + compatible = "atmel,24c32"; + reg = <0x58>; + pagesize = <32>; + }; +}; + +&i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_pins>; + status = "okay"; + clock-frequency = <400000>; + + eeprom@54 { + compatible = "atmel,24c32"; + reg = <0x54>; + pagesize = <32>; + }; +}; + +&mipi_tx0 { + drive-strength-microamp = <5800>; +}; + +&pio { + /* 192 lines */ + gpio-line-names = + "SPI_AP_EC_CS_L", + "SPI_AP_EC_MOSI", + "SPI_AP_EC_CLK", + "I2S3_DO", + "USB_PD_INT_ODL", + "", + "", + "", + "", + "IT6505_HPD_L", + "I2S3_TDM_D3", + "SOC_I2C6_1V8_SCL", + "SOC_I2C6_1V8_SDA", + "DPI_D0", + "DPI_D1", + "DPI_D2", + "DPI_D3", + "DPI_D4", + "DPI_D5", + "DPI_D6", + "DPI_D7", + "DPI_D8", + "DPI_D9", + "DPI_D10", + "DPI_D11", + "DPI_HSYNC", + "DPI_VSYNC", + "DPI_DE", + "DPI_CK", + "AP_MSDC1_CLK", + "AP_MSDC1_DAT3", + "AP_MSDC1_CMD", + "AP_MSDC1_DAT0", + "AP_MSDC1_DAT2", + "AP_MSDC1_DAT1", + "", + "", + "", + "", + "", + "", + "OTG_EN", + "DRVBUS", + "DISP_PWM", + "DSI_TE", + "LCM_RST_1V8", + "AP_CTS_WIFI_RTS", + "AP_RTS_WIFI_CTS", + "SOC_I2C5_1V8_SCL", + "SOC_I2C5_1V8_SDA", + "SOC_I2C3_1V8_SCL", + "SOC_I2C3_1V8_SDA", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "SOC_I2C1_1V8_SDA", + "SOC_I2C0_1V8_SDA", + "SOC_I2C0_1V8_SCL", + "SOC_I2C1_1V8_SCL", + "AP_SPI_H1_MISO", + "AP_SPI_H1_CS_L", + "AP_SPI_H1_MOSI", + "AP_SPI_H1_CLK", + "I2S5_BCK", + "I2S5_LRCK", + "I2S5_DO", + "BOOTBLOCK_EN_L", + "MT8183_KPCOL0", + "SPI_AP_EC_MISO", + "UART_DBG_TX_AP_RX", + "UART_AP_TX_DBG_RX", + "I2S2_MCK", + "I2S2_BCK", + "CLK_5M_WCAM", + "CLK_2M_UCAM", + "I2S2_LRCK", + "I2S2_DI", + "SOC_I2C2_1V8_SCL", + "SOC_I2C2_1V8_SDA", + "SOC_I2C4_1V8_SCL", + "SOC_I2C4_1V8_SDA", + "", + "SCL8", + "SDA8", + "FCAM_PWDN_L", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "I2S_PMIC", + "I2S_PMIC", + "I2S_PMIC", + "I2S_PMIC", + "I2S_PMIC", + "I2S_PMIC", + "I2S_PMIC", + "I2S_PMIC", + "", + "", + "", + "", + "", + "", + /* + * AP_FLASH_WP_L is crossystem ABI. Rev1 schematics + * call it BIOS_FLASH_WP_R_L. + */ + "AP_FLASH_WP_L", + "EC_AP_INT_ODL", + "IT6505_INT_ODL", + "H1_INT_OD_L", + "", + "", + "", + "", + "", + "", + "", + "AP_SPI_FLASH_MISO", + "AP_SPI_FLASH_CS_L", + "AP_SPI_FLASH_MOSI", + "AP_SPI_FLASH_CLK", + "DA7219_IRQ", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + ""; + + ppvarp_lcd_en: ppvarp-lcd-en { + pins1 { + pinmux = <PINMUX_GPIO66__FUNC_GPIO66>; + output-low; + }; + }; + + ppvarn_lcd_en: ppvarn-lcd-en { + pins1 { + pinmux = <PINMUX_GPIO166__FUNC_GPIO166>; + output-low; + }; + }; + + pp1800_lcd_en: pp1800-lcd-en { + pins1 { + pinmux = <PINMUX_GPIO36__FUNC_GPIO36>; + output-low; + }; + }; + + open_touch: open_touch { + irq_pin { + pinmux = <PINMUX_GPIO155__FUNC_GPIO155>; + input-enable; + bias-pull-up; + }; + + rst_pin { + pinmux = <PINMUX_GPIO156__FUNC_GPIO156>; + + /* + * The pen driver doesn't currently support driving + * this reset line. By specifying output-high here + * we're relying on the fact that this pin has a default + * pulldown at boot (which makes sure the pen was in + * reset if it was powered) and then we set it high here + * to take it out of reset. Better would be if the pen + * driver could control this and we could remove + * "output-high" here. + */ + output-high; + }; + }; + + pen_eject: peneject { + pen_eject { + pinmux = <PINMUX_GPIO6__FUNC_GPIO6>; + input-enable; + /* External pull-up. */ + bias-disable; + }; + }; +}; + +&qca_wifi { + qcom,ath10k-calibration-variant = "GO_KAKADU"; +}; + +&panel { + status = "okay"; + compatible = "boe,tv105wum-nw0"; +}; diff --git a/dts/src/arm64/mediatek/mt8183-kukui-kodama-sku16.dts b/dts/src/arm64/mediatek/mt8183-kukui-kodama-sku16.dts new file mode 100644 index 0000000000..e3dd75bdae --- /dev/null +++ b/dts/src/arm64/mediatek/mt8183-kukui-kodama-sku16.dts @@ -0,0 +1,21 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2021 Google LLC + * + * SKU: 0x10 => 16 + * - bit 8: Camera: 0 (OV5695) + * - bits 7..4: Panel ID: 0x1 (AUO) + */ + +/dts-v1/; +#include "mt8183-kukui-kodama.dtsi" + +/ { + model = "MediaTek kodama sku16 board"; + compatible = "google,kodama-sku16", "google,kodama", "mediatek,mt8183"; +}; + +&panel { + status = "okay"; + compatible = "auo,b101uan08.3"; +}; diff --git a/dts/src/arm64/mediatek/mt8183-kukui-kodama-sku272.dts b/dts/src/arm64/mediatek/mt8183-kukui-kodama-sku272.dts new file mode 100644 index 0000000000..d81935ae07 --- /dev/null +++ b/dts/src/arm64/mediatek/mt8183-kukui-kodama-sku272.dts @@ -0,0 +1,21 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2020 Google LLC + * + * SKU: 0x110 => 272 + * - bit 8: Camera: 1 (GC5035) + * - bits 7..4: Panel ID: 0x1 (AUO) + */ + +/dts-v1/; +#include "mt8183-kukui-kodama.dtsi" + +/ { + model = "MediaTek kodama sku272 board"; + compatible = "google,kodama-sku272", "google,kodama", "mediatek,mt8183"; +}; + +&panel { + status = "okay"; + compatible = "auo,b101uan08.3"; +}; diff --git a/dts/src/arm64/mediatek/mt8183-kukui-kodama-sku288.dts b/dts/src/arm64/mediatek/mt8183-kukui-kodama-sku288.dts new file mode 100644 index 0000000000..f4082fbe05 --- /dev/null +++ b/dts/src/arm64/mediatek/mt8183-kukui-kodama-sku288.dts @@ -0,0 +1,21 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2020 Google LLC + * + * SKU: 0x120 => 288 + * - bit 8: Camera: 1 (GC5035) + * - bits 7..4: Panel ID: 0x2 (BOE) + */ + +/dts-v1/; +#include "mt8183-kukui-kodama.dtsi" + +/ { + model = "MediaTek kodama sku288 board"; + compatible = "google,kodama-sku288", "google,kodama", "mediatek,mt8183"; +}; + +&panel { + status = "okay"; + compatible = "boe,tv101wum-n53"; +}; diff --git a/dts/src/arm64/mediatek/mt8183-kukui-kodama-sku32.dts b/dts/src/arm64/mediatek/mt8183-kukui-kodama-sku32.dts new file mode 100644 index 0000000000..7739358008 --- /dev/null +++ b/dts/src/arm64/mediatek/mt8183-kukui-kodama-sku32.dts @@ -0,0 +1,21 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2021 Google LLC + * + * SKU: 0x20 => 32 + * - bit 8: Camera: 0 (OV5695) + * - bits 7..4: Panel ID: 0x2 (BOE) + */ + +/dts-v1/; +#include "mt8183-kukui-kodama.dtsi" + +/ { + model = "MediaTek kodama sku32 board"; + compatible = "google,kodama-sku32", "google,kodama", "mediatek,mt8183"; +}; + +&panel { + status = "okay"; + compatible = "boe,tv101wum-n53"; +}; diff --git a/dts/src/arm64/mediatek/mt8183-kukui-kodama.dtsi b/dts/src/arm64/mediatek/mt8183-kukui-kodama.dtsi new file mode 100644 index 0000000000..2f5234a16e --- /dev/null +++ b/dts/src/arm64/mediatek/mt8183-kukui-kodama.dtsi @@ -0,0 +1,343 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2021 Google LLC + */ + +/dts-v1/; +#include "mt8183-kukui.dtsi" + +/ { + ppvarn_lcd: ppvarn-lcd { + compatible = "regulator-fixed"; + regulator-name = "ppvarn_lcd"; + pinctrl-names = "default"; + pinctrl-0 = <&ppvarn_lcd_en>; + + enable-active-high; + + gpio = <&pio 66 GPIO_ACTIVE_HIGH>; + }; + + ppvarp_lcd: ppvarp-lcd { + compatible = "regulator-fixed"; + regulator-name = "ppvarp_lcd"; + pinctrl-names = "default"; + pinctrl-0 = <&ppvarp_lcd_en>; + + enable-active-high; + + gpio = <&pio 166 GPIO_ACTIVE_HIGH>; + }; + + pp1800_lcd: pp1800-lcd { + compatible = "regulator-fixed"; + regulator-name = "pp1800_lcd"; + pinctrl-names = "default"; + pinctrl-0 = <&pp1800_lcd_en>; + + enable-active-high; + + gpio = <&pio 36 GPIO_ACTIVE_HIGH>; + }; +}; + +&i2c0 { + status = "okay"; + + touchscreen: touchscreen@10 { + compatible = "hid-over-i2c"; + reg = <0x10>; + interrupt-parent = <&pio>; + interrupts = <155 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&touch_default>; + + post-power-on-delay-ms = <10>; + hid-descr-addr = <0x0001>; + }; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + status = "okay"; + clock-frequency = <400000>; + + eeprom@58 { + compatible = "atmel,24c64"; + reg = <0x58>; + pagesize = <32>; + }; +}; + +&i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_pins>; + status = "okay"; + clock-frequency = <400000>; + + eeprom@54 { + compatible = "atmel,24c64"; + reg = <0x54>; + pagesize = <32>; + }; +}; + +&mt6358_vcama2_reg { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; +}; + +&pio { + /* 192 lines */ + gpio-line-names = + "SPI_AP_EC_CS_L", + "SPI_AP_EC_MOSI", + "SPI_AP_EC_CLK", + "I2S3_DO", + "USB_PD_INT_ODL", + "", + "", + "", + "", + "IT6505_HPD_L", + "I2S3_TDM_D3", + "SOC_I2C6_1V8_SCL", + "SOC_I2C6_1V8_SDA", + "DPI_D0", + "DPI_D1", + "DPI_D2", + "DPI_D3", + "DPI_D4", + "DPI_D5", + "DPI_D6", + "DPI_D7", + "DPI_D8", + "DPI_D9", + "DPI_D10", + "DPI_D11", + "DPI_HSYNC", + "DPI_VSYNC", + "DPI_DE", + "DPI_CK", + "AP_MSDC1_CLK", + "AP_MSDC1_DAT3", + "AP_MSDC1_CMD", + "AP_MSDC1_DAT0", + "AP_MSDC1_DAT2", + "AP_MSDC1_DAT1", + "", + "", + "", + "", + "", + "", + "OTG_EN", + "DRVBUS", + "DISP_PWM", + "DSI_TE", + "LCM_RST_1V8", + "AP_CTS_WIFI_RTS", + "AP_RTS_WIFI_CTS", + "SOC_I2C5_1V8_SCL", + "SOC_I2C5_1V8_SDA", + "SOC_I2C3_1V8_SCL", + "SOC_I2C3_1V8_SDA", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "SOC_I2C1_1V8_SDA", + "SOC_I2C0_1V8_SDA", + "SOC_I2C0_1V8_SCL", + "SOC_I2C1_1V8_SCL", + "AP_SPI_H1_MISO", + "AP_SPI_H1_CS_L", + "AP_SPI_H1_MOSI", + "AP_SPI_H1_CLK", + "I2S5_BCK", + "I2S5_LRCK", + "I2S5_DO", + "BOOTBLOCK_EN_L", + "MT8183_KPCOL0", + "SPI_AP_EC_MISO", + "UART_DBG_TX_AP_RX", + "UART_AP_TX_DBG_RX", + "I2S2_MCK", + "I2S2_BCK", + "CLK_5M_WCAM", + "CLK_2M_UCAM", + "I2S2_LRCK", + "I2S2_DI", + "SOC_I2C2_1V8_SCL", + "SOC_I2C2_1V8_SDA", + "SOC_I2C4_1V8_SCL", + "SOC_I2C4_1V8_SDA", + "", + "SCL8", + "SDA8", + "FCAM_PWDN_L", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "I2S_PMIC", + "I2S_PMIC", + "I2S_PMIC", + "I2S_PMIC", + "I2S_PMIC", + "I2S_PMIC", + "I2S_PMIC", + "I2S_PMIC", + "", + "", + "", + "", + "", + "", + /* + * AP_FLASH_WP_L is crossystem ABI. Rev1 schematics + * call it BIOS_FLASH_WP_R_L. + */ + "AP_FLASH_WP_L", + "EC_AP_INT_ODL", + "IT6505_INT_ODL", + "H1_INT_OD_L", + "", + "", + "", + "", + "", + "", + "", + "AP_SPI_FLASH_MISO", + "AP_SPI_FLASH_CS_L", + "AP_SPI_FLASH_MOSI", + "AP_SPI_FLASH_CLK", + "DA7219_IRQ", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + ""; + + ppvarp_lcd_en: ppvarp-lcd-en { + pins1 { + pinmux = <PINMUX_GPIO66__FUNC_GPIO66>; + output-low; + }; + }; + + ppvarn_lcd_en: ppvarn-lcd-en { + pins1 { + pinmux = <PINMUX_GPIO166__FUNC_GPIO166>; + output-low; + }; + }; + + pp1800_lcd_en: pp1800-lcd-en { + pins1 { + pinmux = <PINMUX_GPIO36__FUNC_GPIO36>; + output-low; + }; + }; + + touch_default: touchdefault { + pin_irq { + pinmux = <PINMUX_GPIO155__FUNC_GPIO155>; + input-enable; + bias-pull-up; + }; + + touch_pin_reset: pin_reset { + pinmux = <PINMUX_GPIO156__FUNC_GPIO156>; + + /* + * The touchscreen driver doesn't currently support driving + * this reset line. By specifying output-high here + * we're relying on the fact that this pin has a default + * pulldown at boot (which makes sure the controller was in + * reset if it was powered) and then we set it high here + * to take it out of reset. Better would be if the touchscreen + * driver could control this and we could remove + * "output-high" here. + */ + output-high; + }; + }; +}; + +&qca_wifi { + qcom,ath10k-calibration-variant = "GO_KODAMA"; +}; + +&i2c_tunnel { + google,remote-bus = <2>; +}; diff --git a/dts/src/arm64/mediatek/mt8183-pumpkin.dts b/dts/src/arm64/mediatek/mt8183-pumpkin.dts new file mode 100644 index 0000000000..0aff5eb52e --- /dev/null +++ b/dts/src/arm64/mediatek/mt8183-pumpkin.dts @@ -0,0 +1,378 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2021 BayLibre, SAS. + * Author: Fabien Parent <fparent@baylibre.com> + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include "mt8183.dtsi" +#include "mt6358.dtsi" + +/ { + model = "Pumpkin MT8183"; + compatible = "mediatek,mt8183-pumpkin", "mediatek,mt8183"; + + aliases { + serial0 = &uart0; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0 0x40000000 0 0x80000000>; + }; + + chosen { + stdout-path = "serial0:921600n8"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + scp_mem_reserved: scp_mem_region@50000000 { + compatible = "shared-dma-pool"; + reg = <0 0x50000000 0 0x2900000>; + no-map; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-red { + label = "red"; + gpios = <&pio 155 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-green { + label = "green"; + gpios = <&pio 156 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; + + ntc { + compatible = "murata,ncp03wf104"; + pullup-uv = <1800000>; + pullup-ohm = <390000>; + pulldown-ohm = <0>; + io-channels = <&auxadc 0>; + }; +}; + +&auxadc { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c_pins_0>; + status = "okay"; + clock-frequency = <100000>; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c_pins_1>; + status = "okay"; + clock-frequency = <100000>; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c_pins_2>; + status = "okay"; + clock-frequency = <100000>; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c_pins_3>; + status = "okay"; + clock-frequency = <100000>; +}; + +&i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c_pins_4>; + status = "okay"; + clock-frequency = <100000>; +}; + +&i2c5 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c_pins_5>; + status = "okay"; + clock-frequency = <100000>; +}; + +&i2c6 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c6_pins>; + status = "okay"; + clock-frequency = <100000>; +}; + +&mmc0 { + status = "okay"; + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&mmc0_pins_default>; + pinctrl-1 = <&mmc0_pins_uhs>; + bus-width = <8>; + max-frequency = <200000000>; + cap-mmc-highspeed; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + cap-mmc-hw-reset; + no-sdio; + no-sd; + hs400-ds-delay = <0x12814>; + vmmc-supply = <&mt6358_vemc_reg>; + vqmmc-supply = <&mt6358_vio18_reg>; + assigned-clocks = <&topckgen CLK_TOP_MUX_MSDC50_0>; + assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_CK>; + non-removable; +}; + +&mmc1 { + status = "okay"; + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&mmc1_pins_default>; + pinctrl-1 = <&mmc1_pins_uhs>; + bus-width = <4>; + max-frequency = <200000000>; + cap-sd-highspeed; + sd-uhs-sdr50; + sd-uhs-sdr104; + cap-sdio-irq; + no-mmc; + no-sd; + vmmc-supply = <&mt6358_vmch_reg>; + vqmmc-supply = <&mt6358_vmc_reg>; + keep-power-in-suspend; + enable-sdio-wakeup; + non-removable; +}; + +&pio { + i2c_pins_0: i2c0 { + pins_i2c{ + pinmux = <PINMUX_GPIO82__FUNC_SDA0>, + <PINMUX_GPIO83__FUNC_SCL0>; + mediatek,pull-up-adv = <3>; + mediatek,drive-strength-adv = <00>; + }; + }; + + i2c_pins_1: i2c1 { + pins_i2c{ + pinmux = <PINMUX_GPIO81__FUNC_SDA1>, + <PINMUX_GPIO84__FUNC_SCL1>; + mediatek,pull-up-adv = <3>; + mediatek,drive-strength-adv = <00>; + }; + }; + + i2c_pins_2: i2c2 { + pins_i2c{ + pinmux = <PINMUX_GPIO103__FUNC_SCL2>, + <PINMUX_GPIO104__FUNC_SDA2>; + mediatek,pull-up-adv = <3>; + mediatek,drive-strength-adv = <00>; + }; + }; + + i2c_pins_3: i2c3 { + pins_i2c{ + pinmux = <PINMUX_GPIO50__FUNC_SCL3>, + <PINMUX_GPIO51__FUNC_SDA3>; + mediatek,pull-up-adv = <3>; + mediatek,drive-strength-adv = <00>; + }; + }; + + i2c_pins_4: i2c4 { + pins_i2c{ + pinmux = <PINMUX_GPIO105__FUNC_SCL4>, + <PINMUX_GPIO106__FUNC_SDA4>; + mediatek,pull-up-adv = <3>; + mediatek,drive-strength-adv = <00>; + }; + }; + + i2c_pins_5: i2c5 { + pins_i2c{ + pinmux = <PINMUX_GPIO48__FUNC_SCL5>, + <PINMUX_GPIO49__FUNC_SDA5>; + mediatek,pull-up-adv = <3>; + mediatek,drive-strength-adv = <00>; + }; + }; + + i2c6_pins: i2c6 { + pins_cmd_dat { + pinmux = <PINMUX_GPIO113__FUNC_SCL6>, + <PINMUX_GPIO114__FUNC_SDA6>; + mediatek,pull-up-adv = <3>; + }; + }; + + mmc0_pins_default: mmc0-pins-default { + pins_cmd_dat { + pinmux = <PINMUX_GPIO123__FUNC_MSDC0_DAT0>, + <PINMUX_GPIO128__FUNC_MSDC0_DAT1>, + <PINMUX_GPIO125__FUNC_MSDC0_DAT2>, + <PINMUX_GPIO132__FUNC_MSDC0_DAT3>, + <PINMUX_GPIO126__FUNC_MSDC0_DAT4>, + <PINMUX_GPIO129__FUNC_MSDC0_DAT5>, + <PINMUX_GPIO127__FUNC_MSDC0_DAT6>, + <PINMUX_GPIO130__FUNC_MSDC0_DAT7>, + <PINMUX_GPIO122__FUNC_MSDC0_CMD>; + input-enable; + drive-strength = <MTK_DRIVE_14mA>; + mediatek,pull-up-adv = <01>; + }; + + pins_clk { + pinmux = <PINMUX_GPIO124__FUNC_MSDC0_CLK>; + drive-strength = <MTK_DRIVE_14mA>; + mediatek,pull-down-adv = <10>; + }; + + pins_rst { + pinmux = <PINMUX_GPIO133__FUNC_MSDC0_RSTB>; + drive-strength = <MTK_DRIVE_14mA>; + mediatek,pull-down-adv = <01>; + }; + }; + + mmc0_pins_uhs: mmc0-pins-uhs { + pins_cmd_dat { + pinmux = <PINMUX_GPIO123__FUNC_MSDC0_DAT0>, + <PINMUX_GPIO128__FUNC_MSDC0_DAT1>, + <PINMUX_GPIO125__FUNC_MSDC0_DAT2>, + <PINMUX_GPIO132__FUNC_MSDC0_DAT3>, + <PINMUX_GPIO126__FUNC_MSDC0_DAT4>, + <PINMUX_GPIO129__FUNC_MSDC0_DAT5>, + <PINMUX_GPIO127__FUNC_MSDC0_DAT6>, + <PINMUX_GPIO130__FUNC_MSDC0_DAT7>, + <PINMUX_GPIO122__FUNC_MSDC0_CMD>; + input-enable; + drive-strength = <MTK_DRIVE_14mA>; + mediatek,pull-up-adv = <01>; + }; + + pins_clk { + pinmux = <PINMUX_GPIO124__FUNC_MSDC0_CLK>; + drive-strength = <MTK_DRIVE_14mA>; + mediatek,pull-down-adv = <10>; + }; + + pins_ds { + pinmux = <PINMUX_GPIO131__FUNC_MSDC0_DSL>; + drive-strength = <MTK_DRIVE_14mA>; + mediatek,pull-down-adv = <10>; + }; + + pins_rst { + pinmux = <PINMUX_GPIO133__FUNC_MSDC0_RSTB>; + drive-strength = <MTK_DRIVE_14mA>; + mediatek,pull-up-adv = <01>; + }; + }; + + mmc1_pins_default: mmc1-pins-default { + pins_cmd_dat { + pinmux = <PINMUX_GPIO31__FUNC_MSDC1_CMD>, + <PINMUX_GPIO32__FUNC_MSDC1_DAT0>, + <PINMUX_GPIO34__FUNC_MSDC1_DAT1>, + <PINMUX_GPIO33__FUNC_MSDC1_DAT2>, + <PINMUX_GPIO30__FUNC_MSDC1_DAT3>; + input-enable; + mediatek,pull-up-adv = <10>; + }; + + pins_clk { + pinmux = <PINMUX_GPIO29__FUNC_MSDC1_CLK>; + input-enable; + mediatek,pull-down-adv = <10>; + }; + + pins_pmu { + pinmux = <PINMUX_GPIO178__FUNC_GPIO178>; + output-high; + }; + }; + + mmc1_pins_uhs: mmc1-pins-uhs { + pins_cmd_dat { + pinmux = <PINMUX_GPIO31__FUNC_MSDC1_CMD>, + <PINMUX_GPIO32__FUNC_MSDC1_DAT0>, + <PINMUX_GPIO34__FUNC_MSDC1_DAT1>, + <PINMUX_GPIO33__FUNC_MSDC1_DAT2>, + <PINMUX_GPIO30__FUNC_MSDC1_DAT3>; + drive-strength = <MTK_DRIVE_6mA>; + input-enable; + mediatek,pull-up-adv = <10>; + }; + + pins_clk { + pinmux = <PINMUX_GPIO29__FUNC_MSDC1_CLK>; + drive-strength = <MTK_DRIVE_8mA>; + mediatek,pull-down-adv = <10>; + input-enable; + }; + }; +}; + +&mfg { + domain-supply = <&mt6358_vgpu_reg>; +}; + +&cpu0 { + proc-supply = <&mt6358_vproc12_reg>; +}; + +&cpu1 { + proc-supply = <&mt6358_vproc12_reg>; +}; + +&cpu2 { + proc-supply = <&mt6358_vproc12_reg>; +}; + +&cpu3 { + proc-supply = <&mt6358_vproc12_reg>; +}; + +&cpu4 { + proc-supply = <&mt6358_vproc11_reg>; +}; + +&cpu5 { + proc-supply = <&mt6358_vproc11_reg>; +}; + +&cpu6 { + proc-supply = <&mt6358_vproc11_reg>; +}; + +&cpu7 { + proc-supply = <&mt6358_vproc11_reg>; +}; + +&uart0 { + status = "okay"; +}; + +&scp { + status = "okay"; +}; + +&dsi0 { + status = "disabled"; +}; diff --git a/dts/src/arm64/mediatek/mt8183.dtsi b/dts/src/arm64/mediatek/mt8183.dtsi index 80519a145f..c5e822b6b7 100644 --- a/dts/src/arm64/mediatek/mt8183.dtsi +++ b/dts/src/arm64/mediatek/mt8183.dtsi @@ -13,6 +13,7 @@ #include <dt-bindings/power/mt8183-power.h> #include <dt-bindings/reset-controller/mt8183-resets.h> #include <dt-bindings/phy/phy.h> +#include <dt-bindings/thermal/thermal.h> #include "mt8183-pinfunc.h" / { @@ -657,6 +658,142 @@ status = "disabled"; }; + thermal: thermal@1100b000 { + #thermal-sensor-cells = <1>; + compatible = "mediatek,mt8183-thermal"; + reg = <0 0x1100b000 0 0x1000>; + clocks = <&infracfg CLK_INFRA_THERM>, + <&infracfg CLK_INFRA_AUXADC>; + clock-names = "therm", "auxadc"; + resets = <&infracfg MT8183_INFRACFG_AO_THERM_SW_RST>; + interrupts = <0 76 IRQ_TYPE_LEVEL_LOW>; + mediatek,auxadc = <&auxadc>; + mediatek,apmixedsys = <&apmixedsys>; + nvmem-cells = <&thermal_calibration>; + nvmem-cell-names = "calibration-data"; + }; + + thermal-zones { + cpu_thermal: cpu_thermal { + polling-delay-passive = <100>; + polling-delay = <500>; + thermal-sensors = <&thermal 0>; + sustainable-power = <5000>; + + trips { + threshold: trip-point0 { + temperature = <68000>; + hysteresis = <2000>; + type = "passive"; + }; + + target: trip-point1 { + temperature = <80000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_crit: cpu-crit { + temperature = <115000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&target>; + cooling-device = <&cpu0 + THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>, + <&cpu1 + THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>, + <&cpu2 + THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>, + <&cpu3 + THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; + contribution = <3072>; + }; + map1 { + trip = <&target>; + cooling-device = <&cpu4 + THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>, + <&cpu5 + THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>, + <&cpu6 + THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>, + <&cpu7 + THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; + contribution = <1024>; + }; + }; + }; + + /* The tzts1 ~ tzts6 don't need to polling */ + /* The tzts1 ~ tzts6 don't need to thermal throttle */ + + tzts1: tzts1 { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&thermal 1>; + sustainable-power = <5000>; + trips {}; + cooling-maps {}; + }; + + tzts2: tzts2 { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&thermal 2>; + sustainable-power = <5000>; + trips {}; + cooling-maps {}; + }; + + tzts3: tzts3 { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&thermal 3>; + sustainable-power = <5000>; + trips {}; + cooling-maps {}; + }; + + tzts4: tzts4 { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&thermal 4>; + sustainable-power = <5000>; + trips {}; + cooling-maps {}; + }; + + tzts5: tzts5 { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&thermal 5>; + sustainable-power = <5000>; + trips {}; + cooling-maps {}; + }; + + tztsABB: tztsABB { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&thermal 6>; + sustainable-power = <5000>; + trips {}; + cooling-maps {}; + }; + }; + pwm0: pwm@1100e000 { compatible = "mediatek,mt8183-disp-pwm"; reg = <0 0x1100e000 0 0x1000>; @@ -874,13 +1011,13 @@ clocks = <&infracfg CLK_INFRA_UNIPRO_SCK>, <&infracfg CLK_INFRA_USB>; clock-names = "sys_ck", "ref_ck"; - mediatek,syscon-wakeup = <&pericfg 0x400 0>; + mediatek,syscon-wakeup = <&pericfg 0x420 101>; #address-cells = <2>; #size-cells = <2>; ranges; status = "disabled"; - usb_host: xhci@11200000 { + usb_host: usb@11200000 { compatible = "mediatek,mt8183-xhci", "mediatek,mtk-xhci"; reg = <0 0x11200000 0 0x1000>; @@ -923,11 +1060,10 @@ status = "disabled"; }; - mipi_tx0: mipi-dphy@11e50000 { + mipi_tx0: dsi-phy@11e50000 { compatible = "mediatek,mt8183-mipi-tx"; reg = <0 0x11e50000 0 0x1000>; clocks = <&apmixedsys CLK_APMIXED_MIPID0_26M>; - clock-names = "ref_clk"; #clock-cells = <0>; #phy-cells = <0>; clock-output-names = "mipi_tx0_pll"; @@ -941,16 +1077,19 @@ reg = <0 0x11f10000 0 0x1000>; #address-cells = <1>; #size-cells = <1>; + thermal_calibration: calib@180 { + reg = <0x180 0xc>; + }; + mipi_tx_calibration: calib@190 { reg = <0x190 0xc>; }; }; - u3phy: usb-phy@11f40000 { + u3phy: t-phy@11f40000 { compatible = "mediatek,mt8183-tphy", "mediatek,generic-tphy-v2"; #address-cells = <1>; - #phy-cells = <1>; #size-cells = <1>; ranges = <0 0 0x11f40000 0x1000>; status = "okay"; @@ -964,7 +1103,7 @@ status = "okay"; }; - u3port0: usb-phy@0700 { + u3port0: usb-phy@700 { reg = <0x0700 0x900>; clocks = <&clk26m>; clock-names = "ref"; @@ -983,6 +1122,9 @@ compatible = "mediatek,mt8183-mmsys", "syscon"; reg = <0 0x14000000 0 0x1000>; #clock-cells = <1>; + mboxes = <&gce 0 CMDQ_THR_PRIO_HIGHEST>, + <&gce 1 CMDQ_THR_PRIO_HIGHEST>; + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0 0x1000>; }; ovl0: ovl@14008000 { @@ -1058,6 +1200,7 @@ interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_LOW>; power-domains = <&spm MT8183_POWER_DOMAIN_DISP>; clocks = <&mmsys CLK_MM_DISP_CCORR0>; + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xf000 0x1000>; }; aal0: aal@14010000 { @@ -1067,6 +1210,7 @@ interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_LOW>; power-domains = <&spm MT8183_POWER_DOMAIN_DISP>; clocks = <&mmsys CLK_MM_DISP_AAL0>; + mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0 0x1000>; }; gamma0: gamma@14011000 { @@ -1075,6 +1219,7 @@ interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_LOW>; power-domains = <&spm MT8183_POWER_DOMAIN_DISP>; clocks = <&mmsys CLK_MM_DISP_GAMMA0>; + mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x1000 0x1000>; }; dither0: dither@14012000 { @@ -1083,6 +1228,7 @@ interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_LOW>; power-domains = <&spm MT8183_POWER_DOMAIN_DISP>; clocks = <&mmsys CLK_MM_DISP_DITHER0>; + mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x2000 0x1000>; }; dsi0: dsi@14014000 { diff --git a/dts/src/arm64/mediatek/mt8516.dtsi b/dts/src/arm64/mediatek/mt8516.dtsi index b80e95574b..bbe5a1419e 100644 --- a/dts/src/arm64/mediatek/mt8516.dtsi +++ b/dts/src/arm64/mediatek/mt8516.dtsi @@ -480,7 +480,7 @@ }; usb0: usb@11100000 { - compatible = "mediatek,mtk-musb"; + compatible = "mediatek,mt8516-musb", "mediatek,mtk-musb"; reg = <0 0x11100000 0 0x1000>; interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_LOW>; interrupt-names = "mc"; @@ -493,7 +493,7 @@ }; usb1: usb@11190000 { - compatible = "mediatek,mtk-musb"; + compatible = "mediatek,mt8516-musb", "mediatek,mtk-musb"; reg = <0 0x11190000 0 0x1000>; interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_LOW>; interrupt-names = "mc"; @@ -506,8 +506,9 @@ status = "disabled"; }; - usb_phy: usb@11110000 { - compatible = "mediatek,generic-tphy-v1"; + usb_phy: t-phy@11110000 { + compatible = "mediatek,mt8516-tphy", + "mediatek,generic-tphy-v1"; reg = <0 0x11110000 0 0x800>; #address-cells = <2>; #size-cells = <2>; diff --git a/dts/src/arm64/mediatek/pumpkin-common.dtsi b/dts/src/arm64/mediatek/pumpkin-common.dtsi index 63fd70086b..fcddec1473 100644 --- a/dts/src/arm64/mediatek/pumpkin-common.dtsi +++ b/dts/src/arm64/mediatek/pumpkin-common.dtsi @@ -56,7 +56,7 @@ tca6416: gpio@20 { compatible = "ti,tca6416"; reg = <0x20>; - reset-gpios = <&pio 65 GPIO_ACTIVE_HIGH>; + reset-gpios = <&pio 65 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&tca6416_pins>; @@ -188,6 +188,7 @@ &usb0 { status = "okay"; dr_mode = "peripheral"; + usb-role-switch; usb_con: connector { compatible = "usb-c-connector"; diff --git a/dts/src/arm64/qcom/apq8016-sbc.dts b/dts/src/arm64/qcom/apq8016-sbc.dts index 48bd1c2874..f3c0dbfd0a 100644 --- a/dts/src/arm64/qcom/apq8016-sbc.dts +++ b/dts/src/arm64/qcom/apq8016-sbc.dts @@ -9,5 +9,5 @@ / { model = "Qualcomm Technologies, Inc. APQ 8016 SBC"; - compatible = "qcom,apq8016-sbc", "qcom,apq8016", "qcom,sbc"; + compatible = "qcom,apq8016-sbc", "qcom,apq8016"; }; diff --git a/dts/src/arm64/qcom/msm8916.dtsi b/dts/src/arm64/qcom/msm8916.dtsi index 5353da5219..4f06c0a9c4 100644 --- a/dts/src/arm64/qcom/msm8916.dtsi +++ b/dts/src/arm64/qcom/msm8916.dtsi @@ -25,10 +25,10 @@ chosen { }; - memory { + memory@80000000 { device_type = "memory"; /* We expect the bootloader to fill in the reg */ - reg = <0 0 0 0>; + reg = <0 0x80000000 0 0>; }; reserved-memory { @@ -1766,7 +1766,9 @@ compatible = "qcom,msm-qgic2"; interrupt-controller; #interrupt-cells = <3>; - reg = <0x0b000000 0x1000>, <0x0b002000 0x1000>; + reg = <0x0b000000 0x1000>, <0x0b002000 0x2000>, + <0x0b001000 0x1000>, <0x0b004000 0x2000>; + interrupts = <GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; }; apcs: mailbox@b011000 { diff --git a/dts/src/arm64/qcom/msm8994.dtsi b/dts/src/arm64/qcom/msm8994.dtsi index f49d442d2e..f9f0b5aa6a 100644 --- a/dts/src/arm64/qcom/msm8994.dtsi +++ b/dts/src/arm64/qcom/msm8994.dtsi @@ -149,10 +149,10 @@ }; }; - memory { + memory@80000000 { device_type = "memory"; /* We expect the bootloader to fill in the reg */ - reg = <0 0 0 0>; + reg = <0 0x80000000 0 0>; }; tcsr_mutex: hwlock { diff --git a/dts/src/arm64/qcom/msm8998-clamshell.dtsi b/dts/src/arm64/qcom/msm8998-clamshell.dtsi index b500f24d47..125d7923d7 100644 --- a/dts/src/arm64/qcom/msm8998-clamshell.dtsi +++ b/dts/src/arm64/qcom/msm8998-clamshell.dtsi @@ -281,6 +281,10 @@ }; }; +&remoteproc_mss { + status = "okay"; +}; + &tlmm { gpio-reserved-ranges = <0 4>, <81 4>; diff --git a/dts/src/arm64/qcom/msm8998-mtp.dtsi b/dts/src/arm64/qcom/msm8998-mtp.dtsi index c1ef0c71d5..a1d15eab85 100644 --- a/dts/src/arm64/qcom/msm8998-mtp.dtsi +++ b/dts/src/arm64/qcom/msm8998-mtp.dtsi @@ -328,6 +328,10 @@ status = "okay"; }; +&remoteproc_mss { + status = "okay"; +}; + &remoteproc_slpi { status = "okay"; }; diff --git a/dts/src/arm64/qcom/msm8998-oneplus-cheeseburger.dts b/dts/src/arm64/qcom/msm8998-oneplus-cheeseburger.dts new file mode 100644 index 0000000000..66b9297588 --- /dev/null +++ b/dts/src/arm64/qcom/msm8998-oneplus-cheeseburger.dts @@ -0,0 +1,42 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * OnePlus 5 (cheeseburger) device tree + * + * Copyright (c) 2021, Jami Kettunen <jamipkettunen@gmail.com> + */ + +#include <dt-bindings/leds/common.h> +#include "msm8998-oneplus-common.dtsi" + +/ { + model = "OnePlus 5"; + compatible = "oneplus,cheeseburger", "qcom,msm8998"; + /* Required for bootloader to select correct board */ + qcom,board-id = <8 0 16859 23>; + + /* Capacitive keypad button backlight */ + leds { + compatible = "gpio-leds"; + + pinctrl-names = "default"; + pinctrl-0 = <&button_backlight_default>; + + button-backlight { + gpios = <&pmi8998_gpio 5 GPIO_ACTIVE_HIGH>; + color = <LED_COLOR_ID_WHITE>; + function = LED_FUNCTION_KBD_BACKLIGHT; + default-state = "off"; + }; + }; +}; + +&pmi8998_gpio { + button_backlight_default: button-backlight-default { + pinconf { + pins = "gpio5"; + function = "normal"; + bias-pull-down; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; + }; + }; +}; diff --git a/dts/src/arm64/qcom/msm8998-oneplus-common.dtsi b/dts/src/arm64/qcom/msm8998-oneplus-common.dtsi new file mode 100644 index 0000000000..0f5c7828a9 --- /dev/null +++ b/dts/src/arm64/qcom/msm8998-oneplus-common.dtsi @@ -0,0 +1,514 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * OnePlus 5(T) (cheeseburger / dumpling) common device tree source based on msm8998-mtp.dtsi + * + * Copyright (c) 2021, Jami Kettunen <jamipkettunen@gmail.com> + * Copyright (c) 2016, The Linux Foundation. All rights reserved. + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include "msm8998.dtsi" +#include "pm8998.dtsi" +#include "pmi8998.dtsi" +#include "pm8005.dtsi" + +/ { + /* Required for bootloader to select correct board */ + qcom,msm-id = <292 0x20001>; /* 8998 v2.1 */ + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* Use display framebuffer setup by the UEFI XBL bootloader for simplefb */ + framebuffer0: framebuffer@9d400000 { + compatible = "simple-framebuffer"; + reg = <0x0 0x9d400000 0x0 0x2400000>; + width = <1080>; + height = <1920>; + stride = <(1080 * 4)>; + format = "a8r8g8b8"; + }; + }; + + reserved-memory { + /* Bootloader display framebuffer region */ + cont_splash_mem: memory@9d400000 { + reg = <0x0 0x9d400000 0x0 0x2400000>; + no-map; + }; + + /* For getting crash logs using Android downstream kernels */ + ramoops@ac000000 { + compatible = "ramoops"; + reg = <0x0 0xac000000 0x0 0x200000>; + console-size = <0x80000>; + pmsg-size = <0x40000>; + record-size = <0x8000>; + ftrace-size = <0x20000>; + }; + + /* + * The following memory regions on downstream are "dynamically allocated" + * but given the same addresses every time. Hard code them as these addresses + * are where the OnePlus signed firmware expects them to be. + */ + ipa_fws_region: ipa@f6800000 { + compatible = "shared-dma-pool"; + reg = <0x0 0xf6800000 0x0 0x5000>; + no-map; + }; + zap_shader_region: gpu@f6900000 { + compatible = "shared-dma-pool"; + reg = <0x0 0xf6900000 0x0 0x2000>; + no-map; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + label = "Volume buttons"; + autorepeat; + + pinctrl-names = "default"; + pinctrl-0 = <&vol_keys_default>; + + vol-down { + label = "Volume down"; + gpios = <&pm8998_gpio 5 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEDOWN>; + debounce-interval = <15>; + wakeup-source; + }; + + vol-up { + label = "Volume up"; + gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + debounce-interval = <15>; + wakeup-source; + }; + }; + + gpio-hall-sensor { + compatible = "gpio-keys"; + label = "Hall effect sensor"; + + pinctrl-names = "default"; + pinctrl-0 = <&hall_sensor_default>; + + hall-sensor { + label = "Hall Effect Sensor"; + gpios = <&tlmm 124 GPIO_ACTIVE_LOW>; + linux,input-type = <EV_SW>; + linux,code = <SW_LID>; + linux,can-disable; + wakeup-source; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-always-on; + regulator-boot-on; + }; +}; + +/* + * OnePlus' ADSP firmware requires 30 MiB in total, so increase the adsp_mem + * region by 4 MiB to account for this while relocating the other now + * conflicting memory nodes accordingly. + */ +&adsp_mem { + reg = <0x0 0x8b200000 0x0 0x1e00000>; +}; +&mpss_mem { + reg = <0x0 0x8d000000 0x0 0x7000000>; +}; +&venus_mem { + reg = <0x0 0x94000000 0x0 0x500000>; +}; +&mba_mem { + reg = <0x0 0x94500000 0x0 0x200000>; +}; +&slpi_mem { + reg = <0x0 0x94700000 0x0 0xf00000>; +}; +&ipa_fw_mem { + reg = <0x0 0x95600000 0x0 0x10000>; +}; +&ipa_gsi_mem { + reg = <0x0 0x95610000 0x0 0x5000>; +}; +&gpu_mem { + reg = <0x0 0x95615000 0x0 0x100000>; +}; +&wlan_msa_mem { + reg = <0x0 0x95715000 0x0 0x100000>; +}; + +&blsp1_i2c5 { + status = "okay"; + + touchscreen@20 { + compatible = "syna,rmi4-i2c"; + reg = <0x20>; + #address-cells = <1>; + #size-cells = <0>; + + interrupt-parent = <&tlmm>; + interrupts = <125 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_active &ts_reset_active>; + + vdd-supply = <&vreg_l28_3p0>; + vio-supply = <&vreg_l6a_1p8>; + + syna,reset-delay-ms = <20>; + syna,startup-delay-ms = <20>; + + rmi4-f01@1 { + reg = <0x01>; + syna,nosleep-mode = <1>; + }; + + rmi4_f12: rmi4-f12@12 { + reg = <0x12>; + syna,rezero-wait-ms = <20>; + syna,sensor-type = <1>; + touchscreen-x-mm = <68>; + touchscreen-y-mm = <122>; + }; + }; +}; + +&blsp1_uart3 { + status = "okay"; + + bluetooth { + compatible = "qcom,wcn3990-bt"; + + vddio-supply = <&vreg_s4a_1p8>; + vddxo-supply = <&vreg_l7a_1p8>; + vddrf-supply = <&vreg_l17a_1p3>; + vddch0-supply = <&vreg_l25a_3p3>; + max-speed = <3200000>; + }; +}; + +&blsp1_uart3_on { + rx { + /delete-property/ bias-disable; + /* + * Configure a pull-up on 46 (RX). This is needed to + * avoid garbage data when the TX pin of the Bluetooth + * module is in tri-state (module powered off or not + * driving the signal yet). + */ + bias-pull-up; + }; + + cts { + /delete-property/ bias-disable; + /* + * Configure a pull-down on 47 (CTS) to match the pull + * of the Bluetooth module. + */ + bias-pull-down; + }; +}; + +&blsp2_uart1 { + status = "okay"; +}; + +&pm8005_lsid1 { + pm8005-regulators { + compatible = "qcom,pm8005-regulators"; + + vdd_s1-supply = <&vph_pwr>; + + pm8005_s1: s1 { /* VDD_GFX supply */ + regulator-min-microvolt = <524000>; + regulator-max-microvolt = <1100000>; + regulator-enable-ramp-delay = <500>; + + /* hack until we rig up the gpu consumer */ + regulator-always-on; + }; + }; +}; + +&pm8998_gpio { + vol_keys_default: vol-keys-default { + pinconf { + pins = "gpio5", "gpio6"; + function = "normal"; + bias-pull-up; + input-enable; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; + }; + }; +}; + +&qusb2phy { + status = "okay"; + + vdda-pll-supply = <&vreg_l12a_1p8>; + vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; +}; + +&rpm_requests { + pm8998-regulators { + compatible = "qcom,rpm-pm8998-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_s4-supply = <&vph_pwr>; + vdd_s5-supply = <&vph_pwr>; + vdd_s6-supply = <&vph_pwr>; + vdd_s7-supply = <&vph_pwr>; + vdd_s8-supply = <&vph_pwr>; + vdd_s9-supply = <&vph_pwr>; + vdd_s10-supply = <&vph_pwr>; + vdd_s11-supply = <&vph_pwr>; + vdd_s12-supply = <&vph_pwr>; + vdd_s13-supply = <&vph_pwr>; + vdd_l1_l27-supply = <&vreg_s7a_1p025>; + vdd_l2_l8_l17-supply = <&vreg_s3a_1p35>; + vdd_l3_l11-supply = <&vreg_s7a_1p025>; + vdd_l4_l5-supply = <&vreg_s7a_1p025>; + vdd_l6-supply = <&vreg_s5a_2p04>; + vdd_l7_l12_l14_l15-supply = <&vreg_s5a_2p04>; + vdd_l9-supply = <&vreg_bob>; + vdd_l10_l23_l25-supply = <&vreg_bob>; + vdd_l13_l19_l21-supply = <&vreg_bob>; + vdd_l16_l28-supply = <&vreg_bob>; + vdd_l18_l22-supply = <&vreg_bob>; + vdd_l20_l24-supply = <&vreg_bob>; + vdd_l26-supply = <&vreg_s3a_1p35>; + vdd_lvs1_lvs2-supply = <&vreg_s4a_1p8>; + + vreg_s3a_1p35: s3 { + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + }; + vreg_s4a_1p8: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-allow-set-load; + }; + vreg_s5a_2p04: s5 { + regulator-min-microvolt = <1904000>; + regulator-max-microvolt = <2040000>; + }; + vreg_s7a_1p025: s7 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1028000>; + }; + vreg_l1a_0p875: l1 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + }; + vreg_l2a_1p2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + vreg_l3a_1p0: l3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + vreg_l5a_0p8: l5 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + }; + vreg_l6a_1p8: l6 { + regulator-min-microvolt = <1808000>; + regulator-max-microvolt = <1808000>; + }; + vreg_l7a_1p8: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l8a_1p2: l8 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + vreg_l9a_1p8: l9 { + regulator-min-microvolt = <1808000>; + regulator-max-microvolt = <2960000>; + }; + vreg_l10a_1p8: l10 { + regulator-min-microvolt = <1808000>; + regulator-max-microvolt = <2960000>; + }; + vreg_l11a_1p0: l11 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + vreg_l12a_1p8: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l13a_2p95: l13 { + regulator-min-microvolt = <1808000>; + regulator-max-microvolt = <2960000>; + }; + vreg_l14a_1p88: l14 { + regulator-min-microvolt = <1880000>; + regulator-max-microvolt = <1880000>; + }; + vreg_l15a_1p8: l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l16a_2p7: l16 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2704000>; + }; + vreg_l17a_1p3: l17 { + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1304000>; + }; + vreg_l18a_2p7: l18 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2704000>; + }; + vreg_l19a_3p0: l19 { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + }; + vreg_l20a_2p95: l20 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-allow-set-load; + }; + vreg_l21a_2p95: l21 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-allow-set-load; + regulator-system-load = <800000>; + }; + vreg_l22a_2p85: l22 { + regulator-min-microvolt = <2864000>; + regulator-max-microvolt = <2864000>; + }; + vreg_l23a_3p3: l23 { + regulator-min-microvolt = <3312000>; + regulator-max-microvolt = <3312000>; + }; + vreg_l24a_3p075: l24 { + regulator-min-microvolt = <3088000>; + regulator-max-microvolt = <3088000>; + }; + vreg_l25a_3p3: l25 { + regulator-min-microvolt = <3104000>; + regulator-max-microvolt = <3312000>; + }; + vreg_l26a_1p2: l26 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-allow-set-load; + }; + vreg_l28_3p0: l28 { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + }; + vreg_lvs1a_1p8: lvs1 { }; + vreg_lvs2a_1p8: lvs2 { }; + }; + + pmi8998-regulators { + compatible = "qcom,rpm-pmi8998-regulators"; + + vdd_bob-supply = <&vph_pwr>; + + vreg_bob: bob { + regulator-min-microvolt = <3312000>; + regulator-max-microvolt = <3600000>; + }; + }; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>, <81 4>; + + hall_sensor_default: hall-sensor-default { + pins = "gpio124"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + input-enable; + }; + + ts_int_active: ts-int-active { + pins = "gpio125"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; + + ts_reset_active: ts-reset-active { + pins = "gpio89"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; +}; + +&ufshc { + status = "okay"; + + vcc-supply = <&vreg_l20a_2p95>; + vccq-supply = <&vreg_l26a_1p2>; + vccq2-supply = <&vreg_s4a_1p8>; + vcc-max-microamp = <750000>; + vccq-max-microamp = <560000>; + vccq2-max-microamp = <750000>; +}; + +&ufsphy { + status = "okay"; + + vdda-phy-supply = <&vreg_l1a_0p875>; + vdda-pll-supply = <&vreg_l2a_1p2>; + vddp-ref-clk-supply = <&vreg_l26a_1p2>; + vdda-phy-max-microamp = <51400>; + vdda-pll-max-microamp = <14600>; + vddp-ref-clk-max-microamp = <100>; + vddp-ref-clk-always-on; +}; + +&usb3 { + status = "okay"; + + /* Disable USB3 clock requirement as the device only supports USB2 */ + qcom,select-utmi-as-pipe-clk; +}; + +&usb3_dwc3 { + /* Drop the unused USB 3 PHY */ + phys = <&qusb2phy>; + phy-names = "usb2-phy"; + + /* Fastest mode for USB 2 */ + maximum-speed = "high-speed"; + + /* Force to peripheral until we can switch modes */ + dr_mode = "peripheral"; +}; + +&wifi { + /* Leave disabled until MSS is functional */ + vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>; + vdd-1.8-xo-supply = <&vreg_l7a_1p8>; + vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; + vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; +}; diff --git a/dts/src/arm64/qcom/msm8998-oneplus-dumpling.dts b/dts/src/arm64/qcom/msm8998-oneplus-dumpling.dts new file mode 100644 index 0000000000..544b9b0ae4 --- /dev/null +++ b/dts/src/arm64/qcom/msm8998-oneplus-dumpling.dts @@ -0,0 +1,25 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * OnePlus 5T (dumpling) device tree + * + * Copyright (c) 2021, Jami Kettunen <jamipkettunen@gmail.com> + */ + +#include "msm8998-oneplus-common.dtsi" + +/ { + model = "OnePlus 5T"; + compatible = "oneplus,dumpling", "qcom,msm8998"; + /* Required for bootloader to select correct board */ + qcom,board-id = <8 0 17801 43>; +}; + +/* Update the screen height values from 1920 to 2160 on the 5T */ +&framebuffer0 { + height = <2160>; +}; + +/* Adjust digitizer area height to match the 5T's taller panel */ +&rmi4_f12 { + touchscreen-y-mm = <137>; +}; diff --git a/dts/src/arm64/qcom/msm8998.dtsi b/dts/src/arm64/qcom/msm8998.dtsi index 1f2e93aa65..e9d3ce2993 100644 --- a/dts/src/arm64/qcom/msm8998.dtsi +++ b/dts/src/arm64/qcom/msm8998.dtsi @@ -1398,6 +1398,8 @@ <&rpmpd MSM8998_VDDMX>; power-domain-names = "cx", "mx"; + status = "disabled"; + mba { memory-region = <&mba_mem>; }; diff --git a/dts/src/arm64/qcom/pm8150.dtsi b/dts/src/arm64/qcom/pm8150.dtsi index bdc76d504b..fa4ea7ded0 100644 --- a/dts/src/arm64/qcom/pm8150.dtsi +++ b/dts/src/arm64/qcom/pm8150.dtsi @@ -107,13 +107,11 @@ status = "disabled"; }; - pm8150_rtc: rtc@6000 { + rtc@6000 { compatible = "qcom,pm8941-rtc"; reg = <0x6000>; reg-names = "rtc", "alarm"; interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>; - - status = "disabled"; }; pm8150_gpios: gpio@c000 { diff --git a/dts/src/arm64/qcom/pm8350.dtsi b/dts/src/arm64/qcom/pm8350.dtsi new file mode 100644 index 0000000000..308f9ca7c7 --- /dev/null +++ b/dts/src/arm64/qcom/pm8350.dtsi @@ -0,0 +1,25 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Linaro Limited + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> + +&spmi_bus { + pm8350: pmic@1 { + compatible = "qcom,pm8350", "qcom,spmi-pmic"; + reg = <0x1 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm8350_gpios: gpio@8800 { + compatible = "qcom,pm8350-gpio"; + reg = <0x8800>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; +}; diff --git a/dts/src/arm64/qcom/pm8350b.dtsi b/dts/src/arm64/qcom/pm8350b.dtsi new file mode 100644 index 0000000000..b23bb1d49a --- /dev/null +++ b/dts/src/arm64/qcom/pm8350b.dtsi @@ -0,0 +1,25 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Linaro Limited + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> + +&spmi_bus { + pm8350b: pmic@3 { + compatible = "qcom,pm8350b", "qcom,spmi-pmic"; + reg = <0x3 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm8350b_gpios: gpio@8800 { + compatible = "qcom,pm8350b-gpio"; + reg = <0x8800>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; +}; diff --git a/dts/src/arm64/qcom/pm8350c.dtsi b/dts/src/arm64/qcom/pm8350c.dtsi new file mode 100644 index 0000000000..2b9b75ecec --- /dev/null +++ b/dts/src/arm64/qcom/pm8350c.dtsi @@ -0,0 +1,25 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Linaro Limited + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> + +&spmi_bus { + pm8350c: pmic@2 { + compatible = "qcom,pm8350c", "qcom,spmi-pmic"; + reg = <0x2 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm8350c_gpios: gpio@8800 { + compatible = "qcom,pm8350c-gpio"; + reg = <0x8800>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; +}; diff --git a/dts/src/arm64/qcom/pmk8350.dtsi b/dts/src/arm64/qcom/pmk8350.dtsi new file mode 100644 index 0000000000..1530b8ff27 --- /dev/null +++ b/dts/src/arm64/qcom/pmk8350.dtsi @@ -0,0 +1,25 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Linaro Limited + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> + +&spmi_bus { + pmk8350: pmic@0 { + compatible = "qcom,pmk8350", "qcom,spmi-pmic"; + reg = <0x0 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmk8350_gpios: gpio@b000 { + compatible = "qcom,pmk8350-gpio"; + reg = <0xb000>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; +}; diff --git a/dts/src/arm64/qcom/pmr735a.dtsi b/dts/src/arm64/qcom/pmr735a.dtsi new file mode 100644 index 0000000000..1c675af13c --- /dev/null +++ b/dts/src/arm64/qcom/pmr735a.dtsi @@ -0,0 +1,25 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Linaro Limited + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> + +&spmi_bus { + pmr735a: pmic@4 { + compatible = "qcom,pmr735a", "qcom,spmi-pmic"; + reg = <0x4 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmr735a_gpios: gpio@8800 { + compatible = "qcom,pmr735a-gpio"; + reg = <0x8800>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; +}; diff --git a/dts/src/arm64/qcom/pmr735b.dtsi b/dts/src/arm64/qcom/pmr735b.dtsi new file mode 100644 index 0000000000..1144086280 --- /dev/null +++ b/dts/src/arm64/qcom/pmr735b.dtsi @@ -0,0 +1,25 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Linaro Limited + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> + +&spmi_bus { + pmr735b: pmic@5 { + compatible = "qcom,pmr735b", "qcom,spmi-pmic"; + reg = <0x5 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmr735b_gpios: gpio@8800 { + compatible = "qcom,pmr735b-gpio"; + reg = <0x8800>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; +}; diff --git a/dts/src/arm64/qcom/qrb5165-rb5.dts b/dts/src/arm64/qcom/qrb5165-rb5.dts index 2f0528d012..5f41de20aa 100644 --- a/dts/src/arm64/qcom/qrb5165-rb5.dts +++ b/dts/src/arm64/qcom/qrb5165-rb5.dts @@ -811,10 +811,6 @@ }; }; -&pm8150_rtc { - status = "okay"; -}; - &qupv3_id_0 { status = "okay"; }; @@ -952,6 +948,9 @@ /* CAN */ &spi0 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi0_data_clk>, <&qup_spi0_cs_gpio>; + cs-gpios = <&tlmm 31 GPIO_ACTIVE_LOW>; can@0 { compatible = "microchip,mcp2518fd"; @@ -1352,3 +1351,14 @@ vdd-micb-supply = <&vreg_s4a_1p8>; qcom,dmic-sample-rate = <600000>; }; + +/* PINCTRL - additions to nodes defined in sm8250.dtsi */ +&qup_spi0_cs_gpio { + drive-strength = <6>; + bias-disable; +}; + +&qup_spi0_data_clk { + drive-strength = <6>; + bias-disable; +}; diff --git a/dts/src/arm64/qcom/sc7180-trogdor-coachz-r1-lte.dts b/dts/src/arm64/qcom/sc7180-trogdor-coachz-r1-lte.dts new file mode 100644 index 0000000000..533c048903 --- /dev/null +++ b/dts/src/arm64/qcom/sc7180-trogdor-coachz-r1-lte.dts @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google CoachZ board device tree source + * + * Copyright 2020 Google LLC. + */ + +#include "sc7180-trogdor-coachz-r1.dts" +#include "sc7180-trogdor-lte-sku.dtsi" + +/ { + model = "Google CoachZ (rev1) with LTE"; + compatible = "google,coachz-rev1-sku0", "qcom,sc7180"; +}; + +&cros_ec_proximity { + label = "proximity-wifi-lte"; +}; diff --git a/dts/src/arm64/qcom/sc7180-trogdor-coachz-r1.dts b/dts/src/arm64/qcom/sc7180-trogdor-coachz-r1.dts new file mode 100644 index 0000000000..1b1dbdb2a8 --- /dev/null +++ b/dts/src/arm64/qcom/sc7180-trogdor-coachz-r1.dts @@ -0,0 +1,141 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google CoachZ board device tree source + * + * Copyright 2020 Google LLC. + */ + +/dts-v1/; + +#include "sc7180-trogdor-coachz.dtsi" + +/ { + model = "Google CoachZ (rev1)"; + compatible = "google,coachz-rev1", "qcom,sc7180"; +}; + +&tlmm { + gpio-line-names = "HUB_RST_L", + "AP_RAM_ID0", + "AP_SKU_ID2", + "AP_RAM_ID1", + "FP_TO_AP_IRQ_L", + "AP_RAM_ID2", + "UF_CAM_EN", + "WF_CAM_EN", + "TS_RESET_L", + "TS_INT_L", + "FPMCU_BOOT0", + "EDP_BRIJ_IRQ", + "AP_EDP_BKLTEN", + "UF_CAM_MCLK", + "WF_CAM_CLK", + "EDP_BRIJ_I2C_SDA", + "EDP_BRIJ_I2C_SCL", + "UF_CAM_SDA", + "UF_CAM_SCL", + "WF_CAM_SDA", + "WF_CAM_SCL", + "WLC_IRQ", + "FP_RST_L", + "AMP_EN", + "WLC_NRST", + "AP_SAR_SENSOR_SDA", + "AP_SAR_SENSOR_SCL", + "", + "", + "WF_CAM_RST_L", + "UF_CAM_RST_L", + "AP_BRD_ID2", + "BRIJ_SUSPEND", + "AP_BRD_ID0", + "AP_H1_SPI_MISO", + "AP_H1_SPI_MOSI", + "AP_H1_SPI_CLK", + "AP_H1_SPI_CS_L", + "", + "", + "", + "", + "H1_AP_INT_ODL", + "", + "UART_AP_TX_DBG_RX", + "UART_DBG_TX_AP_RX", + "", + "", + "FORCED_USB_BOOT", + "AMP_BCLK", + "AMP_LRCLK", + "AMP_DIN", + "EN_PP3300_DX_EDP", + "HP_BCLK", + "HP_LRCLK", + "HP_DOUT", + "HP_DIN", + "HP_MCLK", + "AP_SKU_ID0", + "AP_EC_SPI_MISO", + "AP_EC_SPI_MOSI", + "AP_EC_SPI_CLK", + "AP_EC_SPI_CS_L", + "AP_SPI_CLK", + "AP_SPI_MOSI", + "AP_SPI_MISO", + /* + * AP_FLASH_WP_L is crossystem ABI. Schematics + * call it BIOS_FLASH_WP_L. + */ + "AP_FLASH_WP_L", + "", + "AP_SPI_CS0_L", + "SD_CD_ODL", + "", + "", + "", + "", + "FPMCU_SEL", + "UIM2_DATA", + "UIM2_CLK", + "UIM2_RST", + "UIM2_PRESENT_L", + "UIM1_DATA", + "UIM1_CLK", + "UIM1_RST", + "", + "DMIC_CLK_EN", + "HUB_EN", + "", + "AP_SPI_FP_MISO", + "AP_SPI_FP_MOSI", + "AP_SPI_FP_CLK", + "AP_SPI_FP_CS_L", + "AP_SKU_ID1", + "AP_RST_REQ", + "", + "AP_BRD_ID1", + "AP_EC_INT_L", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "EDP_BRIJ_EN", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "AP_TS_PEN_I2C_SDA", + "AP_TS_PEN_I2C_SCL", + "DP_HOT_PLUG_DET", + "EC_IN_RW_ODL"; +}; diff --git a/dts/src/arm64/qcom/sc7180-trogdor-coachz-r2-lte.dts b/dts/src/arm64/qcom/sc7180-trogdor-coachz-r2-lte.dts new file mode 100644 index 0000000000..6e7745801f --- /dev/null +++ b/dts/src/arm64/qcom/sc7180-trogdor-coachz-r2-lte.dts @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google CoachZ board device tree source + * + * Copyright 2020 Google LLC. + */ + +#include "sc7180-trogdor-coachz-r2.dts" +#include "sc7180-trogdor-lte-sku.dtsi" + +/ { + model = "Google CoachZ (rev2+) with LTE"; + compatible = "google,coachz-sku0", "qcom,sc7180"; +}; + +&cros_ec_proximity { + label = "proximity-wifi-lte"; +}; diff --git a/dts/src/arm64/qcom/sc7180-trogdor-coachz-r2.dts b/dts/src/arm64/qcom/sc7180-trogdor-coachz-r2.dts new file mode 100644 index 0000000000..4f69b6ba29 --- /dev/null +++ b/dts/src/arm64/qcom/sc7180-trogdor-coachz-r2.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google CoachZ board device tree source + * + * Copyright 2020 Google LLC. + */ + +/dts-v1/; + +#include "sc7180-trogdor-coachz.dtsi" + +/ { + model = "Google CoachZ (rev2+)"; + compatible = "google,coachz", "qcom,sc7180"; +}; diff --git a/dts/src/arm64/qcom/sc7180-trogdor-coachz.dtsi b/dts/src/arm64/qcom/sc7180-trogdor-coachz.dtsi new file mode 100644 index 0000000000..4c6e433c82 --- /dev/null +++ b/dts/src/arm64/qcom/sc7180-trogdor-coachz.dtsi @@ -0,0 +1,266 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google CoachZ board device tree source + * + * Copyright 2020 Google LLC. + */ + +#include "sc7180.dtsi" + +ap_ec_spi: &spi6 {}; +ap_h1_spi: &spi0 {}; + +#include "sc7180-trogdor.dtsi" + +/* Deleted nodes from trogdor.dtsi */ + +/delete-node/ &alc5682; +/delete-node/ &pp3300_codec; + +/ { + /* BOARD-SPECIFIC TOP LEVEL NODES */ + + adau7002: audio-codec-1 { + compatible = "adi,adau7002"; + IOVDD-supply = <&pp1800_l15a>; + #sound-dai-cells = <0>; + }; +}; + +&ap_spi_fp { + status = "okay"; +}; + +&backlight { + pwms = <&cros_ec_pwm 0>; +}; + +&camcc { + status = "okay"; +}; + +&cros_ec { + cros_ec_proximity: proximity { + compatible = "google,cros-ec-mkbp-proximity"; + label = "proximity-wifi"; + }; +}; + +ap_ts_pen_1v8: &i2c4 { + status = "okay"; + clock-frequency = <400000>; + + ap_ts: touchscreen@5d { + compatible = "goodix,gt7375p"; + reg = <0x5d>; + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_l>, <&ts_reset_l>; + + interrupt-parent = <&tlmm>; + interrupts = <9 IRQ_TYPE_LEVEL_LOW>; + + reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>; + + vdd-supply = <&pp3300_ts>; + }; +}; + +&i2c7 { + status = "disabled"; +}; + +&i2c9 { + status = "disabled"; +}; + +&panel { + compatible = "boe,nv110wtm-n61"; +}; + +&pp3300_dx_edp { + gpio = <&tlmm 67 GPIO_ACTIVE_HIGH>; +}; + +&sdhc_2 { + status = "okay"; +}; + +&sn65dsi86_out { + data-lanes = <0 1 2 3>; +}; + +&sound { + compatible = "google,sc7180-coachz"; + model = "sc7180-adau7002-max98357a"; + audio-routing = "PDM_DAT", "DMIC"; + + pinctrl-names = "default"; + pinctrl-0 = <&dmic_clk_en>; +}; + +&sound_multimedia0_codec { + sound-dai = <&adau7002>; +}; + +/* PINCTRL - modifications to sc7180-trogdor.dtsi */ + +&en_pp3300_dx_edp { + pinmux { + pins = "gpio67"; + }; + + pinconf { + pins = "gpio67"; + }; +}; + +&ts_reset_l { + pinconf { + /* + * We want reset state by default and it will be up to the + * driver to disable this when it's ready. + */ + output-low; + }; +}; + +/* PINCTRL - board-specific pinctrl */ + +&tlmm { + gpio-line-names = "HUB_RST_L", + "AP_RAM_ID0", + "AP_SKU_ID2", + "AP_RAM_ID1", + "FP_TO_AP_IRQ_L", + "AP_RAM_ID2", + "UF_CAM_EN", + "WF_CAM_EN", + "TS_RESET_L", + "TS_INT_L", + "FPMCU_BOOT0", + "EDP_BRIJ_IRQ", + "AP_EDP_BKLTEN", + "UF_CAM_MCLK", + "WF_CAM_CLK", + "EDP_BRIJ_I2C_SDA", + "EDP_BRIJ_I2C_SCL", + "UF_CAM_SDA", + "UF_CAM_SCL", + "WF_CAM_SDA", + "WF_CAM_SCL", + "WLC_IRQ", + "FP_RST_L", + "AMP_EN", + "WLC_NRST", + "AP_SAR_SENSOR_SDA", + "AP_SAR_SENSOR_SCL", + "", + "", + "WF_CAM_RST_L", + "UF_CAM_RST_L", + "AP_BRD_ID2", + "BRIJ_SUSPEND", + "AP_BRD_ID0", + "AP_H1_SPI_MISO", + "AP_H1_SPI_MOSI", + "AP_H1_SPI_CLK", + "AP_H1_SPI_CS_L", + "", + "", + "", + "", + "H1_AP_INT_ODL", + "", + "UART_AP_TX_DBG_RX", + "UART_DBG_TX_AP_RX", + "", + "", + "FORCED_USB_BOOT", + "AMP_BCLK", + "AMP_LRCLK", + "AMP_DIN", + "", + "HP_BCLK", + "HP_LRCLK", + "HP_DOUT", + "HP_DIN", + "HP_MCLK", + "AP_SKU_ID0", + "AP_EC_SPI_MISO", + "AP_EC_SPI_MOSI", + "AP_EC_SPI_CLK", + "AP_EC_SPI_CS_L", + "AP_SPI_CLK", + "AP_SPI_MOSI", + "AP_SPI_MISO", + /* + * AP_FLASH_WP_L is crossystem ABI. Schematics + * call it BIOS_FLASH_WP_L. + */ + "AP_FLASH_WP_L", + "EN_PP3300_DX_EDP", + "AP_SPI_CS0_L", + "SD_CD_ODL", + "", + "", + "", + "", + "EN_FP_RAILS", + "UIM2_DATA", + "UIM2_CLK", + "UIM2_RST", + "UIM2_PRESENT_L", + "UIM1_DATA", + "UIM1_CLK", + "UIM1_RST", + "", + "", + "HUB_EN", + "", + "AP_SPI_FP_MISO", + "AP_SPI_FP_MOSI", + "AP_SPI_FP_CLK", + "AP_SPI_FP_CS_L", + "AP_SKU_ID1", + "AP_RST_REQ", + "", + "AP_BRD_ID1", + "AP_EC_INT_L", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "EDP_BRIJ_EN", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "AP_TS_PEN_I2C_SDA", + "AP_TS_PEN_I2C_SCL", + "DP_HOT_PLUG_DET", + "EC_IN_RW_ODL"; + + dmic_clk_en: dmic_clk_en { + pinmux { + pins = "gpio83"; + function = "gpio"; + }; + + pinconf { + pins = "gpio83"; + drive-strength = <8>; + bias-pull-up; + }; + }; +}; diff --git a/dts/src/arm64/qcom/sc7180-trogdor-lazor-limozeen-nots-r4.dts b/dts/src/arm64/qcom/sc7180-trogdor-lazor-limozeen-nots-r4.dts new file mode 100644 index 0000000000..6ebde08285 --- /dev/null +++ b/dts/src/arm64/qcom/sc7180-trogdor-lazor-limozeen-nots-r4.dts @@ -0,0 +1,34 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Lazor Limozeen board device tree source + * + * Copyright 2020 Google LLC. + */ + +#include "sc7180-trogdor-lazor-limozeen-nots.dts" + +/ { + model = "Google Lazor Limozeen without Touchscreen (rev4)"; + compatible = "google,lazor-rev4-sku5", "qcom,sc7180"; +}; + +/* + * rev4-sku5 was built with a different trackpad. + */ +/delete-node/&trackpad; +&ap_tp_i2c { + trackpad: trackpad@2c { + compatible = "hid-over-i2c"; + reg = <0x2c>; + pinctrl-names = "default"; + pinctrl-0 = <&tp_int_odl>; + + interrupt-parent = <&tlmm>; + interrupts = <58 IRQ_TYPE_EDGE_FALLING>; + + vcc-supply = <&pp3300_fp_tp>; + hid-descr-addr = <0x20>; + + wakeup-source; + }; +}; diff --git a/dts/src/arm64/qcom/sc7180-trogdor-lazor-limozeen-nots.dts b/dts/src/arm64/qcom/sc7180-trogdor-lazor-limozeen-nots.dts new file mode 100644 index 0000000000..0456c7e05d --- /dev/null +++ b/dts/src/arm64/qcom/sc7180-trogdor-lazor-limozeen-nots.dts @@ -0,0 +1,26 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Lazor Limozeen board device tree source + * + * Copyright 2020 Google LLC. + */ + +/dts-v1/; + +#include "sc7180-trogdor-lazor.dtsi" +#include "sc7180-trogdor-lte-sku.dtsi" + +/ { + model = "Google Lazor Limozeen without Touchscreen"; + compatible = "google,lazor-sku6", "google,lazor-sku5", "qcom,sc7180"; +}; + +/delete-node/&ap_ts; + +&panel { + compatible = "innolux,n116bca-ea1", "innolux,n116bge"; +}; + +&sdhc_2 { + status = "okay"; +}; diff --git a/dts/src/arm64/qcom/sc7180-trogdor-lazor-limozeen.dts b/dts/src/arm64/qcom/sc7180-trogdor-lazor-limozeen.dts new file mode 100644 index 0000000000..e6ad6dae4e --- /dev/null +++ b/dts/src/arm64/qcom/sc7180-trogdor-lazor-limozeen.dts @@ -0,0 +1,42 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Lazor Limozeen board device tree source + * + * Copyright 2020 Google LLC. + */ + +/dts-v1/; + +#include "sc7180-trogdor-lazor.dtsi" +#include "sc7180-trogdor-lte-sku.dtsi" + +/ { + model = "Google Lazor Limozeen"; + compatible = "google,lazor-sku4", "qcom,sc7180"; +}; + +/delete-node/&ap_ts; + +&ap_ts_pen_1v8 { + ap_ts: touchscreen@10 { + compatible = "elan,ekth3500"; + reg = <0x10>; + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_l>, <&ts_reset_l>; + + interrupt-parent = <&tlmm>; + interrupts = <9 IRQ_TYPE_LEVEL_LOW>; + + vcc33-supply = <&pp3300_ts>; + + reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>; + }; +}; + +&panel { + compatible = "auo,b116xa01"; +}; + +&sdhc_2 { + status = "okay"; +}; diff --git a/dts/src/arm64/qcom/sc7180-trogdor-lazor-r0.dts b/dts/src/arm64/qcom/sc7180-trogdor-lazor-r0.dts index 30e3e769d2..5c997cd900 100644 --- a/dts/src/arm64/qcom/sc7180-trogdor-lazor-r0.dts +++ b/dts/src/arm64/qcom/sc7180-trogdor-lazor-r0.dts @@ -14,6 +14,15 @@ compatible = "google,lazor-rev0", "qcom,sc7180"; }; +/* + * Lazor is stuffed with a 47k NTC as charger thermistor which currently is + * not supported by the PM6150 ADC driver. Disable the charger thermal zone + * to avoid using bogus temperature values. + */ +&charger_thermal { + status = "disabled"; +}; + &pp3300_hub { /* pp3300_l7c is used to power the USB hub */ /delete-property/regulator-always-on; diff --git a/dts/src/arm64/qcom/sc7180-trogdor-lazor-r1.dts b/dts/src/arm64/qcom/sc7180-trogdor-lazor-r1.dts index c2ef06367b..d9fbcc7bc5 100644 --- a/dts/src/arm64/qcom/sc7180-trogdor-lazor-r1.dts +++ b/dts/src/arm64/qcom/sc7180-trogdor-lazor-r1.dts @@ -14,6 +14,15 @@ compatible = "google,lazor-rev1", "google,lazor-rev2", "qcom,sc7180"; }; +/* + * Lazor is stuffed with a 47k NTC as charger thermistor which currently is + * not supported by the PM6150 ADC driver. Disable the charger thermal zone + * to avoid using bogus temperature values. + */ +&charger_thermal { + status = "disabled"; +}; + &pp3300_hub { /* pp3300_l7c is used to power the USB hub */ /delete-property/regulator-always-on; diff --git a/dts/src/arm64/qcom/sc7180-trogdor-lazor-r3-kb.dts b/dts/src/arm64/qcom/sc7180-trogdor-lazor-r3-kb.dts index 6985beb97e..dcb41afdc8 100644 --- a/dts/src/arm64/qcom/sc7180-trogdor-lazor-r3-kb.dts +++ b/dts/src/arm64/qcom/sc7180-trogdor-lazor-r3-kb.dts @@ -5,7 +5,10 @@ * Copyright 2020 Google LLC. */ -#include "sc7180-trogdor-lazor-r3.dts" +/dts-v1/; + +#include "sc7180-trogdor-lazor.dtsi" +#include "sc7180-lite.dtsi" / { model = "Google Lazor (rev3+) with KB Backlight"; diff --git a/dts/src/arm64/qcom/sc7180-trogdor-lazor-r3-lte.dts b/dts/src/arm64/qcom/sc7180-trogdor-lazor-r3-lte.dts index 0881f8dd02..be44900602 100644 --- a/dts/src/arm64/qcom/sc7180-trogdor-lazor-r3-lte.dts +++ b/dts/src/arm64/qcom/sc7180-trogdor-lazor-r3-lte.dts @@ -5,7 +5,9 @@ * Copyright 2020 Google LLC. */ -#include "sc7180-trogdor-lazor-r3.dts" +/dts-v1/; + +#include "sc7180-trogdor-lazor.dtsi" #include "sc7180-trogdor-lte-sku.dtsi" / { diff --git a/dts/src/arm64/qcom/sc7180-trogdor-lazor-r3.dts b/dts/src/arm64/qcom/sc7180-trogdor-lazor-r3.dts index 1b9d2f4635..ea8c2ee097 100644 --- a/dts/src/arm64/qcom/sc7180-trogdor-lazor-r3.dts +++ b/dts/src/arm64/qcom/sc7180-trogdor-lazor-r3.dts @@ -8,8 +8,18 @@ /dts-v1/; #include "sc7180-trogdor-lazor.dtsi" +#include "sc7180-lite.dtsi" / { model = "Google Lazor (rev3+)"; compatible = "google,lazor", "qcom,sc7180"; }; + +/* + * Lazor is stuffed with a 47k NTC as charger thermistor which currently is + * not supported by the PM6150 ADC driver. Disable the charger thermal zone + * to avoid using bogus temperature values. + */ +&charger_thermal { + status = "disabled"; +}; diff --git a/dts/src/arm64/qcom/sc7180-trogdor-lazor.dtsi b/dts/src/arm64/qcom/sc7180-trogdor-lazor.dtsi index 89e5cd29ec..6b10b96173 100644 --- a/dts/src/arm64/qcom/sc7180-trogdor-lazor.dtsi +++ b/dts/src/arm64/qcom/sc7180-trogdor-lazor.dtsi @@ -12,23 +12,6 @@ ap_h1_spi: &spi0 {}; #include "sc7180-trogdor.dtsi" -/ { - panel: panel { - compatible = "boe,nv133fhm-n62"; - power-supply = <&pp3300_dx_edp>; - backlight = <&backlight>; - hpd-gpios = <&sn65dsi86_bridge 2 GPIO_ACTIVE_HIGH>; - - ports { - port { - panel_in_edp: endpoint { - remote-endpoint = <&sn65dsi86_out>; - }; - }; - }; - }; -}; - &ap_sar_sensor { semtech,cs0-ground; semtech,combined-sensors = <3>; @@ -58,8 +41,30 @@ ap_ts_pen_1v8: &i2c4 { }; }; +&panel { + compatible = "boe,nv133fhm-n62"; +}; + +&trackpad { + interrupts = <58 IRQ_TYPE_EDGE_FALLING>; +}; + +&wifi { + qcom,ath10k-calibration-variant = "GO_LAZOR"; +}; + /* PINCTRL - modifications to sc7180-trogdor.dtsi */ +&trackpad_int_1v8_odl { + pinmux { + pins = "gpio58"; + }; + + pinconf { + pins = "gpio58"; + }; +}; + &ts_reset_l { pinconf { /* This pin is not connected on -rev0, pull up to park. */ diff --git a/dts/src/arm64/qcom/sc7180-trogdor-pompom-r1-lte.dts b/dts/src/arm64/qcom/sc7180-trogdor-pompom-r1-lte.dts new file mode 100644 index 0000000000..0202f03eaf --- /dev/null +++ b/dts/src/arm64/qcom/sc7180-trogdor-pompom-r1-lte.dts @@ -0,0 +1,14 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Pompom board device tree source + * + * Copyright 2020 Google LLC. + */ + +#include "sc7180-trogdor-pompom-r1.dts" +#include "sc7180-trogdor-lte-sku.dtsi" + +/ { + model = "Google Pompom (rev1) with LTE"; + compatible = "google,pompom-rev1-sku0", "qcom,sc7180"; +}; diff --git a/dts/src/arm64/qcom/sc7180-trogdor-pompom-r1.dts b/dts/src/arm64/qcom/sc7180-trogdor-pompom-r1.dts new file mode 100644 index 0000000000..e720e7bd0d --- /dev/null +++ b/dts/src/arm64/qcom/sc7180-trogdor-pompom-r1.dts @@ -0,0 +1,26 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Pompom board device tree source + * + * Copyright 2020 Google LLC. + */ + +/dts-v1/; + +#include "sc7180-trogdor-pompom.dtsi" + +/ { + model = "Google Pompom (rev1)"; + compatible = "google,pompom-rev1", "qcom,sc7180"; +}; + +&pp3300_hub { + /* pp3300_l7c is used to power the USB hub */ + /delete-property/regulator-always-on; + /delete-property/regulator-boot-on; +}; + +&pp3300_l7c { + regulator-always-on; + regulator-boot-on; +}; diff --git a/dts/src/arm64/qcom/sc7180-trogdor-pompom-r2-lte.dts b/dts/src/arm64/qcom/sc7180-trogdor-pompom-r2-lte.dts new file mode 100644 index 0000000000..791d496ad0 --- /dev/null +++ b/dts/src/arm64/qcom/sc7180-trogdor-pompom-r2-lte.dts @@ -0,0 +1,14 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Pompom board device tree source + * + * Copyright 2020 Google LLC. + */ + +#include "sc7180-trogdor-pompom-r2.dts" +#include "sc7180-trogdor-lte-sku.dtsi" + +/ { + model = "Google Pompom (rev2+) with LTE"; + compatible = "google,pompom-sku0", "qcom,sc7180"; +}; diff --git a/dts/src/arm64/qcom/sc7180-trogdor-pompom-r2.dts b/dts/src/arm64/qcom/sc7180-trogdor-pompom-r2.dts new file mode 100644 index 0000000000..984d7337da --- /dev/null +++ b/dts/src/arm64/qcom/sc7180-trogdor-pompom-r2.dts @@ -0,0 +1,44 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Pompom board device tree source + * + * Copyright 2020 Google LLC. + */ + +/dts-v1/; + +#include "sc7180-trogdor-pompom.dtsi" + +/ { + model = "Google Pompom (rev2+)"; + compatible = "google,pompom", "qcom,sc7180"; +}; + +&keyboard_controller { + function-row-physmap = < + MATRIX_KEY(0x00, 0x02, 0) /* T1 */ + MATRIX_KEY(0x03, 0x02, 0) /* T2 */ + MATRIX_KEY(0x02, 0x02, 0) /* T3 */ + MATRIX_KEY(0x01, 0x02, 0) /* T4 */ + MATRIX_KEY(0x03, 0x04, 0) /* T5 */ + MATRIX_KEY(0x02, 0x04, 0) /* T6 */ + MATRIX_KEY(0x01, 0x04, 0) /* T7 */ + MATRIX_KEY(0x02, 0x09, 0) /* T8 */ + MATRIX_KEY(0x01, 0x09, 0) /* T9 */ + MATRIX_KEY(0x00, 0x04, 0) /* T10 */ + >; + linux,keymap = < + MATRIX_KEY(0x00, 0x02, KEY_BACK) + MATRIX_KEY(0x03, 0x02, KEY_REFRESH) + MATRIX_KEY(0x02, 0x02, KEY_ZOOM) + MATRIX_KEY(0x01, 0x02, KEY_SCALE) + MATRIX_KEY(0x03, 0x04, KEY_SYSRQ) + MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN) + MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP) + MATRIX_KEY(0x02, 0x09, KEY_MUTE) + MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN) + MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP) + + CROS_STD_MAIN_KEYMAP + >; +}; diff --git a/dts/src/arm64/qcom/sc7180-trogdor-pompom.dtsi b/dts/src/arm64/qcom/sc7180-trogdor-pompom.dtsi new file mode 100644 index 0000000000..622b5f1b88 --- /dev/null +++ b/dts/src/arm64/qcom/sc7180-trogdor-pompom.dtsi @@ -0,0 +1,295 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Pompom board device tree source + * + * Copyright 2020 Google LLC. + */ + +#include "sc7180.dtsi" + +ap_ec_spi: &spi6 {}; +ap_h1_spi: &spi0 {}; + +#include "sc7180-trogdor.dtsi" + +/ { + thermal-zones { + 5v-choke-thermal { + polling-delay-passive = <0>; + polling-delay = <250>; + + thermal-sensors = <&pm6150_adc_tm 1>; + + trips { + 5v-choke-crit { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + }; +}; + +&alc5682 { + realtek,dmic-clk-driving-high = "true"; +}; + +&cpu6_alert0 { + temperature = <60000>; +}; + +&cpu6_alert1 { + temperature = <65000>; +}; + +&cpu6_thermal { + sustainable-power = <948>; +}; + +&cpu7_alert0 { + temperature = <60000>; +}; + +&cpu7_alert1 { + temperature = <65000>; +}; + +&cpu7_thermal { + sustainable-power = <948>; +}; + +&cpu8_alert0 { + temperature = <60000>; +}; + +&cpu8_alert1 { + temperature = <65000>; +}; + +&cpu8_thermal { + sustainable-power = <948>; +}; + +&cpu9_alert0 { + temperature = <60000>; +}; + +&cpu9_alert1 { + temperature = <65000>; +}; + +&cpu9_thermal { + sustainable-power = <948>; +}; + +&gpio_keys { + status = "okay"; +}; + +ap_ts_pen_1v8: &i2c4 { + status = "okay"; + clock-frequency = <400000>; + + ap_ts: touchscreen@10 { + compatible = "hid-over-i2c"; + reg = <0x10>; + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_l>, <&ts_reset_l>; + + interrupt-parent = <&tlmm>; + interrupts = <9 IRQ_TYPE_LEVEL_LOW>; + + post-power-on-delay-ms = <20>; + hid-descr-addr = <0x0001>; + + vdd-supply = <&pp3300_ts>; + }; +}; + +&panel { + compatible = "kingdisplay,kd116n21-30nv-a010"; +}; + +&pen_insert { + /* Insert = high, eject = low */ + gpios = <&tlmm 52 GPIO_ACTIVE_HIGH>; +}; + +&pm6150_adc { + 5v-choke-thermistor@4e { + reg = <ADC5_AMUX_THM2_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; +}; + +&pm6150_adc_tm { + status = "okay"; + + 5v-choke-thermistor@1 { + reg = <1>; + io-channels = <&pm6150_adc ADC5_AMUX_THM2_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; +}; + +&sdhc_2 { + status = "okay"; +}; + +&sound { + model = "sc7180-rt5682-max98357a-2mic"; + pinctrl-names = "default"; + pinctrl-0 = <&dmic_sel>; + dmic-gpios = <&tlmm 86 GPIO_ACTIVE_HIGH>; +}; + +&usb_c1 { + status = "disabled"; +}; + +&wifi { + qcom,ath10k-calibration-variant = "GO_POMPOM"; +}; + +/* PINCTRL - board-specific pinctrl */ + +&tlmm { + gpio-line-names = "TP_INT_ODL", + "AP_RAM_ID0", + "AP_SKU_ID2", + "AP_RAM_ID1", + "", + "AP_RAM_ID2", + "AP_TP_I2C_SDA", + "AP_TP_I2C_SCL", + "TS_RESET_L", + "TS_INT_L", + "", + "EDP_BRIJ_IRQ", + "AP_EDP_BKLTEN", + "", + "", + "EDP_BRIJ_I2C_SDA", + "EDP_BRIJ_I2C_SCL", + "HUB_RST_L", + "", + "", + "", + "", + "", + "AMP_EN", + "P_SENSOR_INT_L", + "AP_SAR_SENSOR_SDA", + "AP_SAR_SENSOR_SCL", + "", + "HP_IRQ", + "", + "EN_PP3300_DX_EDP", + "AP_BRD_ID2", + "BRIJ_SUSPEND", + "AP_BRD_ID0", + "AP_H1_SPI_MISO", + "AP_H1_SPI_MOSI", + "AP_H1_SPI_CLK", + "AP_H1_SPI_CS_L", + "", + "", + "", + "", + "H1_AP_INT_ODL", + "", + "UART_AP_TX_DBG_RX", + "UART_DBG_TX_AP_RX", + "HP_I2C_SDA", + "HP_I2C_SCL", + "FORCED_USB_BOOT", + "AMP_BCLK", + "AMP_LRCLK", + "AMP_DIN", + "PEN_PDCT_L", + "HP_BCLK", + "HP_LRCLK", + "HP_DOUT", + "HP_DIN", + "HP_MCLK", + "AP_SKU_ID0", + "AP_EC_SPI_MISO", + "AP_EC_SPI_MOSI", + "AP_EC_SPI_CLK", + "AP_EC_SPI_CS_L", + "AP_SPI_CLK", + "AP_SPI_MOSI", + "AP_SPI_MISO", + /* + * AP_FLASH_WP_L is crossystem ABI. Schematics + * call it BIOS_FLASH_WP_L. + */ + "AP_FLASH_WP_L", + "", + "AP_SPI_CS0_L", + "SD_CD_ODL", + "", + "", + "", + "", + "", + "UIM2_DATA", + "UIM2_CLK", + "UIM2_RST", + "UIM2_PRESENT", + "UIM1_DATA", + "UIM1_CLK", + "UIM1_RST", + "", + "EN_PP3300_CODEC", + "EN_PP3300_HUB", + "", + "DMIC_SEL", + "", + "", + "", + "AP_SKU_ID1", + "AP_RST_REQ", + "", + "AP_BRD_ID1", + "AP_EC_INT_R_L", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "EDP_BRIJ_EN", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "AP_TS_PEN_I2C_SDA", + "AP_TS_PEN_I2C_SCL", + "DP_HOT_PLUG_DET", + "EC_IN_RW_ODL"; + + dmic_sel: dmic-sel { + pinmux { + pins = "gpio86"; + function = "gpio"; + }; + + pinconf { + pins = "gpio86"; + bias-pull-down; + }; + }; +}; diff --git a/dts/src/arm64/qcom/sc7180-trogdor-r1.dts b/dts/src/arm64/qcom/sc7180-trogdor-r1.dts index 2cb522d696..2b522f9e0d 100644 --- a/dts/src/arm64/qcom/sc7180-trogdor-r1.dts +++ b/dts/src/arm64/qcom/sc7180-trogdor-r1.dts @@ -17,21 +17,6 @@ ap_h1_spi: &spi0 {}; / { model = "Google Trogdor (rev1+)"; compatible = "google,trogdor", "qcom,sc7180"; - - panel: panel { - compatible = "auo,b116xa01"; - power-supply = <&pp3300_dx_edp>; - backlight = <&backlight>; - hpd-gpios = <&sn65dsi86_bridge 2 GPIO_ACTIVE_HIGH>; - - ports { - port { - panel_in_edp: endpoint { - remote-endpoint = <&sn65dsi86_out>; - }; - }; - }; - }; }; ap_ts_pen_1v8: &i2c4 { @@ -53,6 +38,10 @@ ap_ts_pen_1v8: &i2c4 { }; }; +&panel { + compatible = "auo,b116xa01"; +}; + &pp3300_hub { /* pp3300_l7c is used to power the USB hub */ /delete-property/regulator-always-on; @@ -68,6 +57,22 @@ ap_ts_pen_1v8: &i2c4 { status = "okay"; }; +&trackpad { + interrupts = <58 IRQ_TYPE_EDGE_FALLING>; +}; + +/* PINCTRL - modifications to sc7180-trogdor.dtsi */ + +&trackpad_int_1v8_odl { + pinmux { + pins = "gpio58"; + }; + + pinconf { + pins = "gpio58"; + }; +}; + /* PINCTRL - board-specific pinctrl */ &tlmm { diff --git a/dts/src/arm64/qcom/sc7180-trogdor.dtsi b/dts/src/arm64/qcom/sc7180-trogdor.dtsi index 07c8b2c926..24d293ef56 100644 --- a/dts/src/arm64/qcom/sc7180-trogdor.dtsi +++ b/dts/src/arm64/qcom/sc7180-trogdor.dtsi @@ -6,8 +6,10 @@ */ #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/gpio-keys.h> #include <dt-bindings/input/input.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include <dt-bindings/sound/sc7180-lpass.h> /* PMICs depend on spmi_bus label and so must come after SoC */ #include "pm6150.dtsi" @@ -15,16 +17,18 @@ / { thermal-zones { - charger-thermal { + charger_thermal: charger-thermal { polling-delay-passive = <0>; polling-delay = <0>; - thermal-sensors = <&pm6150_adc_tm 1>; + thermal-sensors = <&pm6150_adc_tm 0>; trips { - temperature = <125000>; - hysteresis = <1000>; - type = "critical"; + charger-crit { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; }; }; }; @@ -45,7 +49,7 @@ /* Increase the size from 2MB to 8MB */ &rmtfs_mem { - reg = <0x0 0x84400000 0x0 0x800000>; + reg = <0x0 0x94600000 0x0 0x800000>; }; / { @@ -243,6 +247,7 @@ gpios = <&tlmm 52 GPIO_ACTIVE_LOW>; linux,code = <SW_PEN_INSERTED>; linux,input-type = <EV_SW>; + wakeup-event-action = <EV_ACT_DEASSERTED>; wakeup-source; }; }; @@ -255,6 +260,21 @@ #sound-dai-cells = <0>; }; + panel: panel { + /* Compatible will be filled in per-board */ + power-supply = <&pp3300_dx_edp>; + backlight = <&backlight>; + hpd-gpios = <&sn65dsi86_bridge 2 GPIO_ACTIVE_HIGH>; + + ports { + port { + panel_in_edp: endpoint { + remote-endpoint = <&sn65dsi86_out>; + }; + }; + }; + }; + pwmleds { compatible = "pwm-leds"; keyboard_backlight: keyboard-backlight { @@ -264,6 +284,42 @@ max-brightness = <1023>; }; }; + + sound: sound { + compatible = "google,sc7180-trogdor"; + model = "sc7180-rt5682-max98357a-1mic"; + + audio-routing = + "Headphone Jack", "HPOL", + "Headphone Jack", "HPOR"; + + #address-cells = <1>; + #size-cells = <0>; + + dai-link@0 { + link-name = "MultiMedia0"; + reg = <MI2S_PRIMARY>; + cpu { + sound-dai = <&lpass_cpu MI2S_PRIMARY>; + }; + + sound_multimedia0_codec: codec { + sound-dai = <&alc5682 0 /* aif1 */>; + }; + }; + + dai-link@1 { + link-name = "MultiMedia1"; + reg = <MI2S_SECONDARY>; + cpu { + sound-dai = <&lpass_cpu MI2S_SECONDARY>; + }; + + sound_multimedia1_codec: codec { + sound-dai = <&max98357a>; + }; + }; + }; }; &qfprom { @@ -551,6 +607,10 @@ }; }; +&camcc { + status = "disabled"; +}; + &dsi0 { status = "okay"; vdda-supply = <&vdda_mipi_dsi0_1p2>; @@ -642,14 +702,14 @@ ap_tp_i2c: &i2c7 { status = "okay"; clock-frequency = <400000>; - trackpad@15 { + trackpad: trackpad@15 { compatible = "elan,ekth3000"; reg = <0x15>; pinctrl-names = "default"; - pinctrl-0 = <&trackpad_int_1v8_odl>; + pinctrl-0 = <&tp_int_odl>; interrupt-parent = <&tlmm>; - interrupts = <58 IRQ_TYPE_EDGE_FALLING>; + interrupts = <0 IRQ_TYPE_EDGE_FALLING>; vcc-supply = <&pp3300_fp_tp>; @@ -697,6 +757,27 @@ hp_i2c: &i2c9 { modem-init; }; +&lpass_cpu { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&sec_mi2s_active>, <&pri_mi2s_active>, <&pri_mi2s_mclk_active>; + + #address-cells = <1>; + #size-cells = <0>; + + mi2s@0 { + reg = <MI2S_PRIMARY>; + qcom,playback-sd-lines = <1>; + qcom,capture-sd-lines = <0>; + }; + + mi2s@1 { + reg = <MI2S_SECONDARY>; + qcom,playback-sd-lines = <0>; + }; +}; + &mdp { status = "okay"; }; @@ -716,8 +797,8 @@ hp_i2c: &i2c9 { &pm6150_adc_tm { status = "okay"; - charger-thermistor@1 { - reg = <1>; + charger-thermistor@0 { + reg = <0>; io-channels = <&pm6150_adc ADC5_AMUX_THM3_100K_PU>; qcom,ratiometric; qcom,hw-settle-time-us = <200>; @@ -768,17 +849,17 @@ hp_i2c: &i2c9 { }; &spi0 { - pinctrl-0 = <&qup_spi0_cs_gpio>; + pinctrl-0 = <&qup_spi0_cs_gpio_init_high>, <&qup_spi0_cs_gpio>; cs-gpios = <&tlmm 37 GPIO_ACTIVE_LOW>; }; &spi6 { - pinctrl-0 = <&qup_spi6_cs_gpio>; + pinctrl-0 = <&qup_spi6_cs_gpio_init_high>, <&qup_spi6_cs_gpio>; cs-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>; }; ap_spi_fp: &spi10 { - pinctrl-0 = <&qup_spi10_cs_gpio>; + pinctrl-0 = <&qup_spi10_cs_gpio_init_high>, <&qup_spi10_cs_gpio>; cs-gpios = <&tlmm 89 GPIO_ACTIVE_LOW>; cros_ec_fp: ec@0 { @@ -787,7 +868,7 @@ ap_spi_fp: &spi10 { interrupt-parent = <&tlmm>; interrupts = <4 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; - pinctrl-0 = <&fp_to_ap_irq_l>, <&fp_rst_l>, <&fpmcu_boot0>, <&fpmcu_sel>; + pinctrl-0 = <&fp_to_ap_irq_l>; spi-max-frequency = <3000000>; }; }; @@ -812,7 +893,6 @@ ap_spi_fp: &spi10 { vddrf-supply = <&pp1300_l2c>; vddch0-supply = <&pp3300_l10c>; max-speed = <3200000>; - clocks = <&rpmhcc RPMH_RF_CLK2>; }; }; @@ -875,6 +955,22 @@ ap_spi_fp: &spi10 { }; }; +&pri_mi2s_active { + pinconf { + pins = "gpio53", "gpio54", "gpio55", "gpio56"; + drive-strength = <2>; + bias-pull-down; + }; +}; + +&pri_mi2s_mclk_active { + pinconf { + pins = "gpio57"; + drive-strength = <2>; + bias-pull-down; + }; +}; + &qspi_cs0 { pinconf { pins = "gpio68"; @@ -1015,6 +1111,14 @@ ap_spi_fp: &spi10 { }; }; +&sec_mi2s_active { + pinconf { + pins = "gpio49", "gpio50", "gpio51"; + drive-strength = <2>; + bias-pull-down; + }; +}; + /* PINCTRL - board-specific pinctrl */ &pm6150_gpio { @@ -1109,20 +1213,6 @@ ap_spi_fp: &spi10 { }; }; - dp_hot_plug_det: dp-hot-plug-det { - pinmux { - pins = "gpio117"; - function = "dp_hot"; - }; - - config { - pins = "gpio117"; - bias-disable; - input-enable; - drive-strength = <2>; - }; - }; - edp_brij_en: edp-brij-en { pinmux { pins = "gpio104"; @@ -1188,48 +1278,6 @@ ap_spi_fp: &spi10 { }; }; - fpmcu_boot0: fpmcu-boot0 { - pinmux { - pins = "gpio10"; - function = "gpio"; - }; - - pinconf { - pins = "gpio10"; - bias-disable; - drive-strength = <2>; - output-low; - }; - }; - - fpmcu_sel: fpmcu-sel { - pinmux { - pins = "gpio22"; - function = "gpio"; - }; - - pinconf { - pins = "gpio22"; - bias-disable; - drive-strength = <2>; - output-high; - }; - }; - - fp_rst_l: fp-rst-l { - pinmux { - pins = "gpio5"; - function = "gpio"; - }; - - pinconf { - pins = "gpio5"; - bias-disable; - drive-strength = <2>; - output-high; - }; - }; - fp_to_ap_irq_l: fp-to-ap-irq-l { pinmux { pins = "gpio4"; @@ -1245,7 +1293,6 @@ ap_spi_fp: &spi10 { }; }; - h1_ap_int_odl: h1-ap-int-odl { pinmux { pins = "gpio42"; @@ -1339,6 +1386,27 @@ ap_spi_fp: &spi10 { }; }; + qup_spi0_cs_gpio_init_high: qup-spi0-cs-gpio-init-high { + pinconf { + pins = "gpio37"; + output-high; + }; + }; + + qup_spi6_cs_gpio_init_high: qup-spi6-cs-gpio-init-high { + pinconf { + pins = "gpio62"; + output-high; + }; + }; + + qup_spi10_cs_gpio_init_high: qup-spi10-cs-gpio-init-high { + pinconf { + pins = "gpio89"; + output-high; + }; + }; + qup_uart3_sleep: qup-uart3-sleep { pinmux { pins = "gpio38", "gpio39", @@ -1386,14 +1454,16 @@ ap_spi_fp: &spi10 { }; }; - trackpad_int_1v8_odl: trackpad-int-1v8-odl { + /* Named trackpad_int_1v8_odl on earlier revision schematics */ + trackpad_int_1v8_odl: + tp_int_odl: tp-int-odl { pinmux { - pins = "gpio58"; + pins = "gpio0"; function = "gpio"; }; pinconf { - pins = "gpio58"; + pins = "gpio0"; /* Has external pullup */ bias-disable; diff --git a/dts/src/arm64/qcom/sc7180.dtsi b/dts/src/arm64/qcom/sc7180.dtsi index 1ea3344ab6..6228ba2d85 100644 --- a/dts/src/arm64/qcom/sc7180.dtsi +++ b/dts/src/arm64/qcom/sc7180.dtsi @@ -110,9 +110,9 @@ no-map; }; - rmtfs_mem: memory@84400000 { + rmtfs_mem: memory@94600000 { compatible = "qcom,rmtfs-mem"; - reg = <0x0 0x84400000 0x0 0x200000>; + reg = <0x0 0x94600000 0x0 0x200000>; no-map; qcom,client-id = <1>; @@ -1856,12 +1856,6 @@ pins = "gpio49", "gpio50", "gpio51"; function = "mi2s_1"; }; - - pinconf { - pins = "gpio49", "gpio50", "gpio51"; - drive-strength = <8>; - bias-pull-up; - }; }; pri_mi2s_active: pri-mi2s-active { @@ -1869,12 +1863,6 @@ pins = "gpio53", "gpio54", "gpio55", "gpio56"; function = "mi2s_0"; }; - - pinconf { - pins = "gpio53", "gpio54", "gpio55", "gpio56"; - drive-strength = <8>; - bias-pull-up; - }; }; pri_mi2s_mclk_active: pri-mi2s-mclk-active { @@ -1882,12 +1870,6 @@ pins = "gpio57"; function = "lpass_ext"; }; - - pinconf { - pins = "gpio57"; - drive-strength = <8>; - bias-pull-up; - }; }; sdc1_on: sdc1-on { @@ -2770,12 +2752,11 @@ }; usb_1_qmpphy: phy-wrapper@88e9000 { - compatible = "qcom,sc7180-qmp-usb3-phy"; + compatible = "qcom,sc7180-qmp-usb3-dp-phy"; reg = <0 0x088e9000 0 0x18c>, - <0 0x088e8000 0 0x38>; - reg-names = "reg-base", "dp_com"; + <0 0x088e8000 0 0x38>, + <0 0x088ea000 0 0x40>; status = "disabled"; - #clock-cells = <1>; #address-cells = <2>; #size-cells = <2>; ranges; @@ -2790,7 +2771,7 @@ <&gcc GCC_USB3_DP_PHY_PRIM_BCR>; reset-names = "phy", "common"; - usb_1_ssphy: phy@88e9200 { + usb_1_ssphy: usb3-phy@88e9200 { reg = <0 0x088e9200 0 0x128>, <0 0x088e9400 0 0x200>, <0 0x088e9c00 0 0x218>, @@ -2803,6 +2784,16 @@ clock-names = "pipe0"; clock-output-names = "usb3_phy_pipe_clk_src"; }; + + dp_phy: dp-phy@88ea200 { + reg = <0 0x088ea200 0 0x200>, + <0 0x088ea400 0 0x200>, + <0 0x088eaa00 0 0x200>, + <0 0x088ea600 0 0x200>, + <0 0x088ea800 0 0x200>; + #clock-cells = <1>; + #phy-cells = <0>; + }; }; dc_noc: interconnect@9160000 { @@ -2854,10 +2845,10 @@ <&gcc GCC_USB30_PRIM_MASTER_CLK>; assigned-clock-rates = <19200000>, <150000000>; - interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 488 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 489 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 6 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 8 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 9 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "hs_phy_irq", "ss_phy_irq", "dm_hs_phy_irq", "dp_hs_phy_irq"; @@ -3166,8 +3157,8 @@ <&gcc GCC_DISP_GPLL0_CLK_SRC>, <&dsi_phy 0>, <&dsi_phy 1>, - <0>, - <0>; + <&dp_phy 0>, + <&dp_phy 1>; clock-names = "bi_tcxo", "gcc_disp_gpll0_clk_src", "dsi0_phy_pll_out_byteclk", @@ -3222,7 +3213,7 @@ #reset-cells = <1>; }; - aoss_qmp: qmp@c300000 { + aoss_qmp: power-controller@c300000 { compatible = "qcom,sc7180-aoss-qmp"; reg = <0 0x0c300000 0 0x100000>; interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>; @@ -3575,7 +3566,8 @@ reg = <0 0x62f00000 0 0x29000>; reg-names = "lpass-lpaif"; - iommus = <&apps_smmu 0x1020 0>; + iommus = <&apps_smmu 0x1020 0>, + <&apps_smmu 0x1021 0>; power-domains = <&lpass_hm LPASS_CORE_HM_GDSCR>; diff --git a/dts/src/arm64/qcom/sc7280-idp.dts b/dts/src/arm64/qcom/sc7280-idp.dts new file mode 100644 index 0000000000..54d2cb365b --- /dev/null +++ b/dts/src/arm64/qcom/sc7280-idp.dts @@ -0,0 +1,259 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * sc7280 IDP board device tree source + * + * Copyright (c) 2021, The Linux Foundation. All rights reserved. + */ + +/dts-v1/; + +#include "sc7280.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. sc7280 IDP platform"; + compatible = "qcom,sc7280-idp", "qcom,sc7280"; + + aliases { + serial0 = &uart5; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&apps_rsc { + pm7325-regulators { + compatible = "qcom,pm7325-rpmh-regulators"; + qcom,pmic-id = "b"; + + vreg_s1b_1p8: smps1 { + regulator-min-microvolt = <1856000>; + regulator-max-microvolt = <2040000>; + }; + + vreg_s7b_0p9: smps7 { + regulator-min-microvolt = <535000>; + regulator-max-microvolt = <1120000>; + }; + + vreg_s8b_1p2: smps8 { + regulator-min-microvolt = <1256000>; + regulator-max-microvolt = <1500000>; + }; + + vreg_l1b_0p8: ldo1 { + regulator-min-microvolt = <825000>; + regulator-max-microvolt = <925000>; + }; + + vreg_l2b_3p0: ldo2 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3544000>; + }; + + vreg_l6b_1p2: ldo6 { + regulator-min-microvolt = <1140000>; + regulator-max-microvolt = <1260000>; + }; + + vreg_l7b_2p9: ldo7 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + }; + + vreg_l8b_0p9: ldo8 { + regulator-min-microvolt = <870000>; + regulator-max-microvolt = <970000>; + }; + + vreg_l9b_1p2: ldo9 { + regulator-min-microvolt = <1080000>; + regulator-max-microvolt = <1304000>; + }; + + vreg_l11b_1p7: ldo11 { + regulator-min-microvolt = <1504000>; + regulator-max-microvolt = <2000000>; + }; + + vreg_l12b_0p8: ldo12 { + regulator-min-microvolt = <751000>; + regulator-max-microvolt = <824000>; + }; + + vreg_l13b_0p8: ldo13 { + regulator-min-microvolt = <530000>; + regulator-max-microvolt = <824000>; + }; + + vreg_l14b_1p2: ldo14 { + regulator-min-microvolt = <1080000>; + regulator-max-microvolt = <1304000>; + }; + + vreg_l15b_0p8: ldo15 { + regulator-min-microvolt = <765000>; + regulator-max-microvolt = <1020000>; + }; + + vreg_l16b_1p2: ldo16 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1300000>; + }; + + vreg_l17b_1p8: ldo17 { + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <1900000>; + }; + + vreg_l18b_1p8: ldo18 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2000000>; + }; + + vreg_l19b_1p8: ldo19 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + }; + + pm8350c-regulators { + compatible = "qcom,pm8350c-rpmh-regulators"; + qcom,pmic-id = "c"; + + vreg_s1c_2p2: smps1 { + regulator-min-microvolt = <2190000>; + regulator-max-microvolt = <2210000>; + }; + + vreg_s9c_1p0: smps9 { + regulator-min-microvolt = <1010000>; + regulator-max-microvolt = <1170000>; + }; + + vreg_l1c_1p8: ldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1980000>; + }; + + vreg_l2c_1p8: ldo2 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <1980000>; + }; + + vreg_l3c_3p0: ldo3 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3540000>; + }; + + vreg_l4c_1p8: ldo4 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <3300000>; + }; + + vreg_l5c_1p8: ldo5 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <3300000>; + }; + + vreg_l6c_2p9: ldo6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + vreg_l7c_3p0: ldo7 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3544000>; + }; + + vreg_l8c_1p8: ldo8 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <2000000>; + }; + + vreg_l9c_2p9: ldo9 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + }; + + vreg_l10c_0p8: ldo10 { + regulator-min-microvolt = <720000>; + regulator-max-microvolt = <1050000>; + }; + + vreg_l11c_2p8: ldo11 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3544000>; + }; + + vreg_l12c_1p8: ldo12 { + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <2000000>; + }; + + vreg_l13c_3p0: ldo13 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3544000>; + }; + + vreg_bob: bob { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3960000>; + }; + }; + + pmr735a-regulators { + compatible = "qcom,pmr735a-rpmh-regulators"; + qcom,pmic-id = "e"; + + vreg_l2e_1p2: ldo2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + vreg_l3e_0p9: ldo3 { + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <1020000>; + }; + + vreg_l4e_1p7: ldo4 { + regulator-min-microvolt = <1776000>; + regulator-max-microvolt = <1890000>; + }; + + vreg_l5e_0p8: ldo5 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + }; + + vreg_l6e_0p8: ldo6 { + regulator-min-microvolt = <480000>; + regulator-max-microvolt = <904000>; + }; + }; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&uart5 { + status = "okay"; +}; + +/* PINCTRL - additions to nodes defined in sc7280.dtsi */ + +&qup_uart5_default { + tx { + pins = "gpio46"; + drive-strength = <2>; + bias-disable; + }; + + rx { + pins = "gpio47"; + drive-strength = <2>; + bias-pull-up; + }; +}; diff --git a/dts/src/arm64/qcom/sc7280.dtsi b/dts/src/arm64/qcom/sc7280.dtsi new file mode 100644 index 0000000000..2cc4785539 --- /dev/null +++ b/dts/src/arm64/qcom/sc7280.dtsi @@ -0,0 +1,1128 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * sc7280 SoC device tree source + * + * Copyright (c) 2020-2021, The Linux Foundation. All rights reserved. + */ + +#include <dt-bindings/clock/qcom,gcc-sc7280.h> +#include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/mailbox/qcom-ipcc.h> +#include <dt-bindings/power/qcom-aoss-qmp.h> +#include <dt-bindings/power/qcom-rpmpd.h> +#include <dt-bindings/soc/qcom,rpmh-rsc.h> + +/ { + interrupt-parent = <&intc>; + + #address-cells = <2>; + #size-cells = <2>; + + chosen { }; + + clocks { + xo_board: xo-board { + compatible = "fixed-clock"; + clock-frequency = <76800000>; + #clock-cells = <0>; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + clock-frequency = <32000>; + #clock-cells = <0>; + }; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + aop_mem: memory@80800000 { + reg = <0x0 0x80800000 0x0 0x60000>; + no-map; + }; + + aop_cmd_db_mem: memory@80860000 { + reg = <0x0 0x80860000 0x0 0x20000>; + compatible = "qcom,cmd-db"; + no-map; + }; + + cpucp_mem: memory@80b00000 { + no-map; + reg = <0x0 0x80b00000 0x0 0x100000>; + }; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "arm,kryo"; + reg = <0x0 0x0>; + enable-method = "psci"; + cpu-idle-states = <&LITTLE_CPU_SLEEP_0 + &LITTLE_CPU_SLEEP_1 + &CLUSTER_SLEEP_0>; + next-level-cache = <&L2_0>; + L2_0: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + L3_0: l3-cache { + compatible = "cache"; + }; + }; + }; + + CPU1: cpu@100 { + device_type = "cpu"; + compatible = "arm,kryo"; + reg = <0x0 0x100>; + enable-method = "psci"; + cpu-idle-states = <&LITTLE_CPU_SLEEP_0 + &LITTLE_CPU_SLEEP_1 + &CLUSTER_SLEEP_0>; + next-level-cache = <&L2_100>; + L2_100: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU2: cpu@200 { + device_type = "cpu"; + compatible = "arm,kryo"; + reg = <0x0 0x200>; + enable-method = "psci"; + cpu-idle-states = <&LITTLE_CPU_SLEEP_0 + &LITTLE_CPU_SLEEP_1 + &CLUSTER_SLEEP_0>; + next-level-cache = <&L2_200>; + L2_200: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU3: cpu@300 { + device_type = "cpu"; + compatible = "arm,kryo"; + reg = <0x0 0x300>; + enable-method = "psci"; + cpu-idle-states = <&LITTLE_CPU_SLEEP_0 + &LITTLE_CPU_SLEEP_1 + &CLUSTER_SLEEP_0>; + next-level-cache = <&L2_300>; + L2_300: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU4: cpu@400 { + device_type = "cpu"; + compatible = "arm,kryo"; + reg = <0x0 0x400>; + enable-method = "psci"; + cpu-idle-states = <&BIG_CPU_SLEEP_0 + &BIG_CPU_SLEEP_1 + &CLUSTER_SLEEP_0>; + next-level-cache = <&L2_400>; + L2_400: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU5: cpu@500 { + device_type = "cpu"; + compatible = "arm,kryo"; + reg = <0x0 0x500>; + enable-method = "psci"; + cpu-idle-states = <&BIG_CPU_SLEEP_0 + &BIG_CPU_SLEEP_1 + &CLUSTER_SLEEP_0>; + next-level-cache = <&L2_500>; + L2_500: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU6: cpu@600 { + device_type = "cpu"; + compatible = "arm,kryo"; + reg = <0x0 0x600>; + enable-method = "psci"; + cpu-idle-states = <&BIG_CPU_SLEEP_0 + &BIG_CPU_SLEEP_1 + &CLUSTER_SLEEP_0>; + next-level-cache = <&L2_600>; + L2_600: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU7: cpu@700 { + device_type = "cpu"; + compatible = "arm,kryo"; + reg = <0x0 0x700>; + enable-method = "psci"; + cpu-idle-states = <&BIG_CPU_SLEEP_0 + &BIG_CPU_SLEEP_1 + &CLUSTER_SLEEP_0>; + next-level-cache = <&L2_700>; + L2_700: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + idle-states { + entry-method = "psci"; + + LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 { + compatible = "arm,idle-state"; + idle-state-name = "little-power-down"; + arm,psci-suspend-param = <0x40000003>; + entry-latency-us = <549>; + exit-latency-us = <901>; + min-residency-us = <1774>; + local-timer-stop; + }; + + LITTLE_CPU_SLEEP_1: cpu-sleep-0-1 { + compatible = "arm,idle-state"; + idle-state-name = "little-rail-power-down"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <702>; + exit-latency-us = <915>; + min-residency-us = <4001>; + local-timer-stop; + }; + + BIG_CPU_SLEEP_0: cpu-sleep-1-0 { + compatible = "arm,idle-state"; + idle-state-name = "big-power-down"; + arm,psci-suspend-param = <0x40000003>; + entry-latency-us = <523>; + exit-latency-us = <1244>; + min-residency-us = <2207>; + local-timer-stop; + }; + + BIG_CPU_SLEEP_1: cpu-sleep-1-1 { + compatible = "arm,idle-state"; + idle-state-name = "big-rail-power-down"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <526>; + exit-latency-us = <1854>; + min-residency-us = <5555>; + local-timer-stop; + }; + + CLUSTER_SLEEP_0: cluster-sleep-0 { + compatible = "arm,idle-state"; + idle-state-name = "cluster-power-down"; + arm,psci-suspend-param = <0x40003444>; + entry-latency-us = <3263>; + exit-latency-us = <6562>; + min-residency-us = <9926>; + local-timer-stop; + }; + }; + }; + + memory@80000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the size */ + reg = <0 0x80000000 0 0>; + }; + + firmware { + scm { + compatible = "qcom,scm-sc7280", "qcom,scm"; + }; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + soc: soc@0 { + #address-cells = <2>; + #size-cells = <2>; + ranges = <0 0 0 0 0x10 0>; + dma-ranges = <0 0 0 0 0x10 0>; + compatible = "simple-bus"; + + gcc: clock-controller@100000 { + compatible = "qcom,gcc-sc7280"; + reg = <0 0x00100000 0 0x1f0000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>, + <0>, <0>, <0>, <0>, <0>, <0>; + clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk", + "pcie_0_pipe_clk", "pcie_1_pipe-clk", + "ufs_phy_rx_symbol_0_clk", "ufs_phy_rx_symbol_1_clk", + "ufs_phy_tx_symbol_0_clk", + "usb3_phy_wrapper_gcc_usb30_pipe_clk"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + ipcc: mailbox@408000 { + compatible = "qcom,sc7280-ipcc", "qcom,ipcc"; + reg = <0 0x00408000 0 0x1000>; + interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <3>; + #mbox-cells = <2>; + }; + + qupv3_id_0: geniqup@9c0000 { + compatible = "qcom,geni-se-qup"; + reg = <0 0x009c0000 0 0x2000>; + clock-names = "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + uart5: serial@994000 { + compatible = "qcom,geni-debug-uart"; + reg = <0 0x00994000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart5_default>; + interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + }; + + stm@6002000 { + compatible = "arm,coresight-stm", "arm,primecell"; + reg = <0 0x06002000 0 0x1000>, + <0 0x16280000 0 0x180000>; + reg-names = "stm-base", "stm-stimulus-base"; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + stm_out: endpoint { + remote-endpoint = <&funnel0_in7>; + }; + }; + }; + }; + + funnel@6041000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x06041000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + funnel0_out: endpoint { + remote-endpoint = <&merge_funnel_in0>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@7 { + reg = <7>; + funnel0_in7: endpoint { + remote-endpoint = <&stm_out>; + }; + }; + }; + }; + + funnel@6042000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x06042000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + funnel1_out: endpoint { + remote-endpoint = <&merge_funnel_in1>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@4 { + reg = <4>; + funnel1_in4: endpoint { + remote-endpoint = <&apss_merge_funnel_out>; + }; + }; + }; + }; + + funnel@6045000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x06045000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + merge_funnel_out: endpoint { + remote-endpoint = <&swao_funnel_in>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + merge_funnel_in0: endpoint { + remote-endpoint = <&funnel0_out>; + }; + }; + + port@1 { + reg = <1>; + merge_funnel_in1: endpoint { + remote-endpoint = <&funnel1_out>; + }; + }; + }; + }; + + replicator@6046000 { + compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; + reg = <0 0x06046000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + replicator_out: endpoint { + remote-endpoint = <&etr_in>; + }; + }; + }; + + in-ports { + port { + replicator_in: endpoint { + remote-endpoint = <&swao_replicator_out>; + }; + }; + }; + }; + + etr@6048000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0 0x06048000 0 0x1000>; + iommus = <&apps_smmu 0x04c0 0>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,scatter-gather; + + in-ports { + port { + etr_in: endpoint { + remote-endpoint = <&replicator_out>; + }; + }; + }; + }; + + funnel@6b04000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x06b04000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + swao_funnel_out: endpoint { + remote-endpoint = <&etf_in>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@7 { + reg = <7>; + swao_funnel_in: endpoint { + remote-endpoint = <&merge_funnel_out>; + }; + }; + }; + }; + + etf@6b05000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0 0x06b05000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + etf_out: endpoint { + remote-endpoint = <&swao_replicator_in>; + }; + }; + }; + + in-ports { + port { + etf_in: endpoint { + remote-endpoint = <&swao_funnel_out>; + }; + }; + }; + }; + + replicator@6b06000 { + compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; + reg = <0 0x06b06000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + qcom,replicator-loses-context; + + out-ports { + port { + swao_replicator_out: endpoint { + remote-endpoint = <&replicator_in>; + }; + }; + }; + + in-ports { + port { + swao_replicator_in: endpoint { + remote-endpoint = <&etf_out>; + }; + }; + }; + }; + + etm@7040000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07040000 0 0x1000>; + + cpu = <&CPU0>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; + + out-ports { + port { + etm0_out: endpoint { + remote-endpoint = <&apss_funnel_in0>; + }; + }; + }; + }; + + etm@7140000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07140000 0 0x1000>; + + cpu = <&CPU1>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; + + out-ports { + port { + etm1_out: endpoint { + remote-endpoint = <&apss_funnel_in1>; + }; + }; + }; + }; + + etm@7240000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07240000 0 0x1000>; + + cpu = <&CPU2>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; + + out-ports { + port { + etm2_out: endpoint { + remote-endpoint = <&apss_funnel_in2>; + }; + }; + }; + }; + + etm@7340000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07340000 0 0x1000>; + + cpu = <&CPU3>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; + + out-ports { + port { + etm3_out: endpoint { + remote-endpoint = <&apss_funnel_in3>; + }; + }; + }; + }; + + etm@7440000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07440000 0 0x1000>; + + cpu = <&CPU4>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; + + out-ports { + port { + etm4_out: endpoint { + remote-endpoint = <&apss_funnel_in4>; + }; + }; + }; + }; + + etm@7540000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07540000 0 0x1000>; + + cpu = <&CPU5>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; + + out-ports { + port { + etm5_out: endpoint { + remote-endpoint = <&apss_funnel_in5>; + }; + }; + }; + }; + + etm@7640000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07640000 0 0x1000>; + + cpu = <&CPU6>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; + + out-ports { + port { + etm6_out: endpoint { + remote-endpoint = <&apss_funnel_in6>; + }; + }; + }; + }; + + etm@7740000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07740000 0 0x1000>; + + cpu = <&CPU7>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; + + out-ports { + port { + etm7_out: endpoint { + remote-endpoint = <&apss_funnel_in7>; + }; + }; + }; + }; + + funnel@7800000 { /* APSS Funnel */ + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x07800000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + apss_funnel_out: endpoint { + remote-endpoint = <&apss_merge_funnel_in>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + apss_funnel_in0: endpoint { + remote-endpoint = <&etm0_out>; + }; + }; + + port@1 { + reg = <1>; + apss_funnel_in1: endpoint { + remote-endpoint = <&etm1_out>; + }; + }; + + port@2 { + reg = <2>; + apss_funnel_in2: endpoint { + remote-endpoint = <&etm2_out>; + }; + }; + + port@3 { + reg = <3>; + apss_funnel_in3: endpoint { + remote-endpoint = <&etm3_out>; + }; + }; + + port@4 { + reg = <4>; + apss_funnel_in4: endpoint { + remote-endpoint = <&etm4_out>; + }; + }; + + port@5 { + reg = <5>; + apss_funnel_in5: endpoint { + remote-endpoint = <&etm5_out>; + }; + }; + + port@6 { + reg = <6>; + apss_funnel_in6: endpoint { + remote-endpoint = <&etm6_out>; + }; + }; + + port@7 { + reg = <7>; + apss_funnel_in7: endpoint { + remote-endpoint = <&etm7_out>; + }; + }; + }; + }; + + funnel@7810000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x07810000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + apss_merge_funnel_out: endpoint { + remote-endpoint = <&funnel1_in4>; + }; + }; + }; + + in-ports { + port { + apss_merge_funnel_in: endpoint { + remote-endpoint = <&apss_funnel_out>; + }; + }; + }; + }; + + system-cache-controller@9200000 { + compatible = "qcom,sc7280-llcc"; + reg = <0 0x09200000 0 0xd0000>, <0 0x09600000 0 0x50000>; + reg-names = "llcc_base", "llcc_broadcast_base"; + interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>; + }; + + pdc: interrupt-controller@b220000 { + compatible = "qcom,sc7280-pdc", "qcom,pdc"; + reg = <0 0x0b220000 0 0x30000>; + qcom,pdc-ranges = <0 480 40>, <40 140 14>, <54 263 1>, + <55 306 4>, <59 312 3>, <62 374 2>, + <64 434 2>, <66 438 3>, <69 86 1>, + <70 520 54>, <124 609 31>, <155 63 1>, + <156 716 12>; + #interrupt-cells = <2>; + interrupt-parent = <&intc>; + interrupt-controller; + }; + + aoss_qmp: power-controller@c300000 { + compatible = "qcom,sc7280-aoss-qmp"; + reg = <0 0x0c300000 0 0x100000>; + interrupts-extended = <&ipcc IPCC_CLIENT_AOP + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_AOP + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + #clock-cells = <0>; + #power-domain-cells = <1>; + }; + + spmi_bus: spmi@c440000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0 0x0c440000 0 0x1100>, + <0 0x0c600000 0 0x2000000>, + <0 0x0e600000 0 0x100000>, + <0 0x0e700000 0 0xa0000>, + <0 0x0c40a000 0 0x26000>; + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; + interrupt-names = "periph_irq"; + interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <1>; + #size-cells = <1>; + interrupt-controller; + #interrupt-cells = <4>; + }; + + tlmm: pinctrl@f100000 { + compatible = "qcom,sc7280-pinctrl"; + reg = <0 0x0f100000 0 0x300000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&tlmm 0 0 175>; + wakeup-parent = <&pdc>; + + qup_uart5_default: qup-uart5-default { + pins = "gpio46", "gpio47"; + function = "qup13"; + }; + }; + + apps_smmu: iommu@15000000 { + compatible = "qcom,sc7280-smmu-500", "arm,mmu-500"; + reg = <0 0x15000000 0 0x100000>; + #iommu-cells = <2>; + #global-interrupts = <1>; + dma-coherent; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>; + }; + + intc: interrupt-controller@17a00000 { + compatible = "arm,gic-v3"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0 0x17a00000 0 0x10000>, /* GICD */ + <0 0x17a60000 0 0x100000>; /* GICR * 8 */ + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>; + + gic-its@17a40000 { + compatible = "arm,gic-v3-its"; + msi-controller; + #msi-cells = <1>; + reg = <0 0x17a40000 0 0x20000>; + status = "disabled"; + }; + }; + + watchdog@17c10000 { + compatible = "qcom,apss-wdt-sc7280", "qcom,kpss-wdt"; + reg = <0 0x17c10000 0 0x1000>; + clocks = <&sleep_clk>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; + }; + + timer@17c20000 { + #address-cells = <2>; + #size-cells = <2>; + ranges; + compatible = "arm,armv7-timer-mem"; + reg = <0 0x17c20000 0 0x1000>; + + frame@17c21000 { + frame-number = <0>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + reg = <0 0x17c21000 0 0x1000>, + <0 0x17c22000 0 0x1000>; + }; + + frame@17c23000 { + frame-number = <1>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + reg = <0 0x17c23000 0 0x1000>; + status = "disabled"; + }; + + frame@17c25000 { + frame-number = <2>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + reg = <0 0x17c25000 0 0x1000>; + status = "disabled"; + }; + + frame@17c27000 { + frame-number = <3>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + reg = <0 0x17c27000 0 0x1000>; + status = "disabled"; + }; + + frame@17c29000 { + frame-number = <4>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + reg = <0 0x17c29000 0 0x1000>; + status = "disabled"; + }; + + frame@17c2b000 { + frame-number = <5>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + reg = <0 0x17c2b000 0 0x1000>; + status = "disabled"; + }; + + frame@17c2d000 { + frame-number = <6>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + reg = <0 0x17c2d000 0 0x1000>; + status = "disabled"; + }; + }; + + apps_rsc: rsc@18200000 { + compatible = "qcom,rpmh-rsc"; + reg = <0 0x18200000 0 0x10000>, + <0 0x18210000 0 0x10000>, + <0 0x18220000 0 0x10000>; + reg-names = "drv-0", "drv-1", "drv-2"; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + qcom,tcs-offset = <0xd00>; + qcom,drv-id = <2>; + qcom,tcs-config = <ACTIVE_TCS 2>, + <SLEEP_TCS 3>, + <WAKE_TCS 3>, + <CONTROL_TCS 1>; + + rpmhpd: power-controller { + compatible = "qcom,sc7280-rpmhpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmhpd_opp_table>; + + rpmhpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmhpd_opp_ret: opp1 { + opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>; + }; + + rpmhpd_opp_low_svs: opp2 { + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + }; + + rpmhpd_opp_svs: opp3 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + }; + + rpmhpd_opp_svs_l1: opp4 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + }; + + rpmhpd_opp_svs_l2: opp5 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>; + }; + + rpmhpd_opp_nom: opp6 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM>; + }; + + rpmhpd_opp_nom_l1: opp7 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; + }; + + rpmhpd_opp_turbo: opp8 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; + }; + + rpmhpd_opp_turbo_l1: opp9 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>; + }; + }; + }; + + rpmhcc: clock-controller { + compatible = "qcom,sc7280-rpmh-clk"; + clocks = <&xo_board>; + clock-names = "xo"; + #clock-cells = <1>; + }; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; + }; +}; diff --git a/dts/src/arm64/qcom/sdm845-db845c.dts b/dts/src/arm64/qcom/sdm845-db845c.dts index c4ac6f5dc0..2d5533dd4e 100644 --- a/dts/src/arm64/qcom/sdm845-db845c.dts +++ b/dts/src/arm64/qcom/sdm845-db845c.dts @@ -244,7 +244,7 @@ &adsp_pas { status = "okay"; - firmware-name = "qcom/sdm845/adsp.mdt"; + firmware-name = "qcom/sdm845/adsp.mbn"; }; &apps_rsc { @@ -390,7 +390,7 @@ &cdsp_pas { status = "okay"; - firmware-name = "qcom/sdm845/cdsp.mdt"; + firmware-name = "qcom/sdm845/cdsp.mbn"; }; &dsi0 { @@ -1015,7 +1015,7 @@ left_spkr: wsa8810-left{ compatible = "sdw10217201000"; reg = <0 1>; - powerdown-gpios = <&wcdgpio 2 GPIO_ACTIVE_HIGH>; + powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_HIGH>; #thermal-sensor-cells = <0>; sound-name-prefix = "SpkrLeft"; #sound-dai-cells = <0>; @@ -1023,7 +1023,7 @@ right_spkr: wsa8810-right{ compatible = "sdw10217201000"; - powerdown-gpios = <&wcdgpio 2 GPIO_ACTIVE_HIGH>; + powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_HIGH>; reg = <0 2>; #thermal-sensor-cells = <0>; sound-name-prefix = "SpkrRight"; @@ -1108,6 +1108,25 @@ status = "okay"; }; +&camss { + vdda-supply = <&vreg_l1a_0p875>; + + status = "ok"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + csiphy0_ep: endpoint { + clock-lanes = <7>; + data-lanes = <0 1 2 3>; + remote-endpoint = <&ov8856_ep>; + }; + }; + }; +}; + &cci_i2c0 { camera@10 { compatible = "ovti,ov8856"; @@ -1137,7 +1156,7 @@ avdd-supply = <&cam0_avdd_2v8>; dvdd-supply = <&cam0_dvdd_1v2>; - status = "disable"; + status = "ok"; port { ov8856_ep: endpoint { @@ -1145,7 +1164,7 @@ link-frequencies = /bits/ 64 <360000000 180000000>; data-lanes = <1 2 3 4>; -// remote-endpoint = <&csiphy0_ep>; + remote-endpoint = <&csiphy0_ep>; }; }; }; diff --git a/dts/src/arm64/qcom/sdm845-xiaomi-beryllium.dts b/dts/src/arm64/qcom/sdm845-xiaomi-beryllium.dts index 86cbae63ea..7d02942533 100644 --- a/dts/src/arm64/qcom/sdm845-xiaomi-beryllium.dts +++ b/dts/src/arm64/qcom/sdm845-xiaomi-beryllium.dts @@ -157,6 +157,14 @@ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; + vreg_l14a_1p8: ldo14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-boot-on; + regulator-always-on; + }; + vreg_l17a_1p3: ldo17 { regulator-min-microvolt = <1304000>; regulator-max-microvolt = <1304000>; @@ -191,6 +199,7 @@ regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-boot-on; }; }; }; @@ -200,6 +209,43 @@ firmware-name = "qcom/sdm845/cdsp.mdt"; }; +&dsi0 { + status = "okay"; + vdda-supply = <&vreg_l26a_1p2>; + + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "tianma,fhd-video"; + reg = <0>; + vddi0-supply = <&vreg_l14a_1p8>; + vddpos-supply = <&lab>; + vddneg-supply = <&ibb>; + + #address-cells = <1>; + #size-cells = <0>; + + reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>; + + port { + tianma_nt36672a_in_0: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; +}; + +&dsi0_out { + remote-endpoint = <&tianma_nt36672a_in_0>; + data-lanes = <0 1 2 3>; +}; + +&dsi0_phy { + status = "okay"; + vdds-supply = <&vreg_l1a_0p875>; +}; + &gcc { protected-clocks = <GCC_QSPI_CORE_CLK>, <GCC_QSPI_CORE_CLK_SRC>, @@ -215,6 +261,31 @@ }; }; +&ibb { + regulator-min-microvolt = <4600000>; + regulator-max-microvolt = <6000000>; + regulator-over-current-protection; + regulator-pull-down; + regulator-soft-start; + qcom,discharge-resistor-kohms = <300>; +}; + +&lab { + regulator-min-microvolt = <4600000>; + regulator-max-microvolt = <6000000>; + regulator-over-current-protection; + regulator-pull-down; + regulator-soft-start; +}; + +&mdss { + status = "okay"; +}; + +&mdss_mdp { + status = "okay"; +}; + &mss_pil { status = "okay"; firmware-name = "qcom/sdm845/mba.mbn", "qcom/sdm845/modem.mdt"; diff --git a/dts/src/arm64/qcom/sdm845.dtsi b/dts/src/arm64/qcom/sdm845.dtsi index 454f794af5..0a86fe71a6 100644 --- a/dts/src/arm64/qcom/sdm845.dtsi +++ b/dts/src/arm64/qcom/sdm845.dtsi @@ -1061,6 +1061,16 @@ gcc: clock-controller@100000 { compatible = "qcom,gcc-sdm845"; reg = <0 0x00100000 0 0x1f0000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&rpmhcc RPMH_CXO_CLK_A>, + <&sleep_clk>, + <&pcie0_lane>, + <&pcie1_lane>; + clock-names = "bi_tcxo", + "bi_tcxo_ao", + "sleep_clk", + "pcie_0_pipe_clk", + "pcie_1_pipe_clk"; #clock-cells = <1>; #reset-cells = <1>; #power-domain-cells = <1>; @@ -2062,6 +2072,7 @@ clocks = <&gcc GCC_PCIE_0_PIPE_CLK>; clock-names = "pipe0"; + #clock-cells = <0>; #phy-cells = <0>; clock-output-names = "pcie_0_pipe_clk"; }; @@ -2170,6 +2181,7 @@ clocks = <&gcc GCC_PCIE_1_PIPE_CLK>; clock-names = "pipe0"; + #clock-cells = <0>; #phy-cells = <0>; clock-output-names = "pcie_1_pipe_clk"; }; @@ -2382,7 +2394,7 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; - gpio-ranges = <&tlmm 0 0 150>; + gpio-ranges = <&tlmm 0 0 151>; wakeup-parent = <&pdc_intc>; cci0_default: cci0-default { @@ -3673,7 +3685,6 @@ <0 0x088e8000 0 0x10>; reg-names = "reg-base", "dp_com"; status = "disabled"; - #clock-cells = <1>; #address-cells = <2>; #size-cells = <2>; ranges; @@ -3695,6 +3706,7 @@ <0 0x088e9600 0 0x128>, <0 0x088e9800 0 0x200>, <0 0x088e9a00 0 0x100>; + #clock-cells = <0>; #phy-cells = <0>; clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; clock-names = "pipe0"; @@ -3706,7 +3718,6 @@ compatible = "qcom,sdm845-qmp-usb3-uni-phy"; reg = <0 0x088eb000 0 0x18c>; status = "disabled"; - #clock-cells = <1>; #address-cells = <2>; #size-cells = <2>; ranges; @@ -3726,6 +3737,7 @@ <0 0x088eb400 0 0x1fc>, <0 0x088eb800 0 0x218>, <0 0x088eb600 0 0x70>; + #clock-cells = <0>; #phy-cells = <0>; clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>; clock-names = "pipe0"; @@ -3909,6 +3921,141 @@ #reset-cells = <1>; }; + camss: camss@a00000 { + compatible = "qcom,sdm845-camss"; + + reg = <0 0xacb3000 0 0x1000>, + <0 0xacba000 0 0x1000>, + <0 0xacc8000 0 0x1000>, + <0 0xac65000 0 0x1000>, + <0 0xac66000 0 0x1000>, + <0 0xac67000 0 0x1000>, + <0 0xac68000 0 0x1000>, + <0 0xacaf000 0 0x4000>, + <0 0xacb6000 0 0x4000>, + <0 0xacc4000 0 0x4000>; + reg-names = "csid0", + "csid1", + "csid2", + "csiphy0", + "csiphy1", + "csiphy2", + "csiphy3", + "vfe0", + "vfe1", + "vfe_lite"; + + interrupts = <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 478 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 479 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "csid0", + "csid1", + "csid2", + "csiphy0", + "csiphy1", + "csiphy2", + "csiphy3", + "vfe0", + "vfe1", + "vfe_lite"; + + power-domains = <&clock_camcc IFE_0_GDSC>, + <&clock_camcc IFE_1_GDSC>, + <&clock_camcc TITAN_TOP_GDSC>; + + clocks = <&clock_camcc CAM_CC_CAMNOC_AXI_CLK>, + <&clock_camcc CAM_CC_CPAS_AHB_CLK>, + <&clock_camcc CAM_CC_CPHY_RX_CLK_SRC>, + <&clock_camcc CAM_CC_IFE_0_CSID_CLK>, + <&clock_camcc CAM_CC_IFE_0_CSID_CLK_SRC>, + <&clock_camcc CAM_CC_IFE_1_CSID_CLK>, + <&clock_camcc CAM_CC_IFE_1_CSID_CLK_SRC>, + <&clock_camcc CAM_CC_IFE_LITE_CSID_CLK>, + <&clock_camcc CAM_CC_IFE_LITE_CSID_CLK_SRC>, + <&clock_camcc CAM_CC_CSIPHY0_CLK>, + <&clock_camcc CAM_CC_CSI0PHYTIMER_CLK>, + <&clock_camcc CAM_CC_CSI0PHYTIMER_CLK_SRC>, + <&clock_camcc CAM_CC_CSIPHY1_CLK>, + <&clock_camcc CAM_CC_CSI1PHYTIMER_CLK>, + <&clock_camcc CAM_CC_CSI1PHYTIMER_CLK_SRC>, + <&clock_camcc CAM_CC_CSIPHY2_CLK>, + <&clock_camcc CAM_CC_CSI2PHYTIMER_CLK>, + <&clock_camcc CAM_CC_CSI2PHYTIMER_CLK_SRC>, + <&clock_camcc CAM_CC_CSIPHY3_CLK>, + <&clock_camcc CAM_CC_CSI3PHYTIMER_CLK>, + <&clock_camcc CAM_CC_CSI3PHYTIMER_CLK_SRC>, + <&gcc GCC_CAMERA_AHB_CLK>, + <&gcc GCC_CAMERA_AXI_CLK>, + <&clock_camcc CAM_CC_SLOW_AHB_CLK_SRC>, + <&clock_camcc CAM_CC_SOC_AHB_CLK>, + <&clock_camcc CAM_CC_IFE_0_AXI_CLK>, + <&clock_camcc CAM_CC_IFE_0_CLK>, + <&clock_camcc CAM_CC_IFE_0_CPHY_RX_CLK>, + <&clock_camcc CAM_CC_IFE_0_CLK_SRC>, + <&clock_camcc CAM_CC_IFE_1_AXI_CLK>, + <&clock_camcc CAM_CC_IFE_1_CLK>, + <&clock_camcc CAM_CC_IFE_1_CPHY_RX_CLK>, + <&clock_camcc CAM_CC_IFE_1_CLK_SRC>, + <&clock_camcc CAM_CC_IFE_LITE_CLK>, + <&clock_camcc CAM_CC_IFE_LITE_CPHY_RX_CLK>, + <&clock_camcc CAM_CC_IFE_LITE_CLK_SRC>; + clock-names = "camnoc_axi", + "cpas_ahb", + "cphy_rx_src", + "csi0", + "csi0_src", + "csi1", + "csi1_src", + "csi2", + "csi2_src", + "csiphy0", + "csiphy0_timer", + "csiphy0_timer_src", + "csiphy1", + "csiphy1_timer", + "csiphy1_timer_src", + "csiphy2", + "csiphy2_timer", + "csiphy2_timer_src", + "csiphy3", + "csiphy3_timer", + "csiphy3_timer_src", + "gcc_camera_ahb", + "gcc_camera_axi", + "slow_ahb_src", + "soc_ahb", + "vfe0_axi", + "vfe0", + "vfe0_cphy_rx", + "vfe0_src", + "vfe1_axi", + "vfe1", + "vfe1_cphy_rx", + "vfe1_src", + "vfe_lite", + "vfe_lite_cphy_rx", + "vfe_lite_src"; + + iommus = <&apps_smmu 0x0808 0x0>, + <&apps_smmu 0x0810 0x8>, + <&apps_smmu 0x0c08 0x0>, + <&apps_smmu 0x0c10 0x8>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + cci: cci@ac4a000 { compatible = "qcom,sdm845-cci"; #address-cells = <1>; @@ -4428,7 +4575,7 @@ #reset-cells = <1>; }; - aoss_qmp: qmp@c300000 { + aoss_qmp: power-controller@c300000 { compatible = "qcom,sdm845-aoss-qmp"; reg = <0 0x0c300000 0 0x100000>; interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>; diff --git a/dts/src/arm64/qcom/sm8150.dtsi b/dts/src/arm64/qcom/sm8150.dtsi index e5bb17bc2f..51235a9521 100644 --- a/dts/src/arm64/qcom/sm8150.dtsi +++ b/dts/src/arm64/qcom/sm8150.dtsi @@ -577,17 +577,188 @@ <&sleep_clk>; }; + qupv3_id_0: geniqup@8c0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0x008c0000 0x0 0x6000>; + clock-names = "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; + iommus = <&apps_smmu 0xc3 0x0>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + i2c0: i2c@880000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00880000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c0_default>; + interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@884000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00884000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c1_default>; + interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@888000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00888000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c2_default>; + interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@88c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x0088c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c3_default>; + interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c4: i2c@890000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00890000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c4_default>; + interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c5: i2c@894000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00894000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c5_default>; + interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c6: i2c@898000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00898000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c6_default>; + interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c7: i2c@89c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x0089c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c7_default>; + interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + }; + qupv3_id_1: geniqup@ac0000 { compatible = "qcom,geni-se-qup"; reg = <0x0 0x00ac0000 0x0 0x6000>; clock-names = "m-ahb", "s-ahb"; clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; + iommus = <&apps_smmu 0x603 0x0>; #address-cells = <2>; #size-cells = <2>; ranges; status = "disabled"; + i2c8: i2c@a80000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a80000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c8_default>; + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c9: i2c@a84000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a84000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c9_default>; + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c10: i2c@a88000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a88000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c10_default>; + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c11: i2c@a8c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a8c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c11_default>; + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + uart2: serial@a90000 { compatible = "qcom,geni-debug-uart"; reg = <0x0 0x00a90000 0x0 0x4000>; @@ -596,6 +767,124 @@ interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; + + i2c12: i2c@a90000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a90000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c12_default>; + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c16: i2c@94000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x0094000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c16_default>; + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + qupv3_id_2: geniqup@cc0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0x00cc0000 0x0 0x6000>; + + clock-names = "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>; + iommus = <&apps_smmu 0x7a3 0x0>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + i2c17: i2c@c80000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00c80000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c17_default>; + interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c18: i2c@c84000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00c84000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c18_default>; + interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c19: i2c@c88000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00c88000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c19_default>; + interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c13: i2c@c8c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00c8c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c13_default>; + interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c14: i2c@c90000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00c90000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c14_default>; + interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c15: i2c@c94000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00c94000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c15_default>; + interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; }; config_noc: interconnect@1500000 { @@ -914,11 +1203,271 @@ <0x0 0x03D00000 0x0 0x300000>; reg-names = "west", "east", "north", "south"; interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; - gpio-ranges = <&tlmm 0 0 175>; + gpio-ranges = <&tlmm 0 0 176>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + + qup_i2c0_default: qup-i2c0-default { + mux { + pins = "gpio0", "gpio1"; + function = "qup0"; + }; + + config { + pins = "gpio0", "gpio1"; + drive-strength = <0x02>; + bias-disable; + }; + }; + + qup_i2c1_default: qup-i2c1-default { + mux { + pins = "gpio114", "gpio115"; + function = "qup1"; + }; + + config { + pins = "gpio114", "gpio115"; + drive-strength = <0x02>; + bias-disable; + }; + }; + + qup_i2c2_default: qup-i2c2-default { + mux { + pins = "gpio126", "gpio127"; + function = "qup2"; + }; + + config { + pins = "gpio126", "gpio127"; + drive-strength = <0x02>; + bias-disable; + }; + }; + + qup_i2c3_default: qup-i2c3-default { + mux { + pins = "gpio144", "gpio145"; + function = "qup3"; + }; + + config { + pins = "gpio144", "gpio145"; + drive-strength = <0x02>; + bias-disable; + }; + }; + + qup_i2c4_default: qup-i2c4-default { + mux { + pins = "gpio51", "gpio52"; + function = "qup4"; + }; + + config { + pins = "gpio51", "gpio52"; + drive-strength = <0x02>; + bias-disable; + }; + }; + + qup_i2c5_default: qup-i2c5-default { + mux { + pins = "gpio121", "gpio122"; + function = "qup5"; + }; + + config { + pins = "gpio121", "gpio122"; + drive-strength = <0x02>; + bias-disable; + }; + }; + + qup_i2c6_default: qup-i2c6-default { + mux { + pins = "gpio6", "gpio7"; + function = "qup6"; + }; + + config { + pins = "gpio6", "gpio7"; + drive-strength = <0x02>; + bias-disable; + }; + }; + + qup_i2c7_default: qup-i2c7-default { + mux { + pins = "gpio98", "gpio99"; + function = "qup7"; + }; + + config { + pins = "gpio98", "gpio99"; + drive-strength = <0x02>; + bias-disable; + }; + }; + + qup_i2c8_default: qup-i2c8-default { + mux { + pins = "gpio88", "gpio89"; + function = "qup8"; + }; + + config { + pins = "gpio88", "gpio89"; + drive-strength = <0x02>; + bias-disable; + }; + }; + + qup_i2c9_default: qup-i2c9-default { + mux { + pins = "gpio39", "gpio40"; + function = "qup9"; + }; + + config { + pins = "gpio39", "gpio40"; + drive-strength = <0x02>; + bias-disable; + }; + }; + + qup_i2c10_default: qup-i2c10-default { + mux { + pins = "gpio9", "gpio10"; + function = "qup10"; + }; + + config { + pins = "gpio9", "gpio10"; + drive-strength = <0x02>; + bias-disable; + }; + }; + + qup_i2c11_default: qup-i2c11-default { + mux { + pins = "gpio94", "gpio95"; + function = "qup11"; + }; + + config { + pins = "gpio94", "gpio95"; + drive-strength = <0x02>; + bias-disable; + }; + }; + + qup_i2c12_default: qup-i2c12-default { + mux { + pins = "gpio83", "gpio84"; + function = "qup12"; + }; + + config { + pins = "gpio83", "gpio84"; + drive-strength = <0x02>; + bias-disable; + }; + }; + + qup_i2c13_default: qup-i2c13-default { + mux { + pins = "gpio43", "gpio44"; + function = "qup13"; + }; + + config { + pins = "gpio43", "gpio44"; + drive-strength = <0x02>; + bias-disable; + }; + }; + + qup_i2c14_default: qup-i2c14-default { + mux { + pins = "gpio47", "gpio48"; + function = "qup14"; + }; + + config { + pins = "gpio47", "gpio48"; + drive-strength = <0x02>; + bias-disable; + }; + }; + + qup_i2c15_default: qup-i2c15-default { + mux { + pins = "gpio27", "gpio28"; + function = "qup15"; + }; + + config { + pins = "gpio27", "gpio28"; + drive-strength = <0x02>; + bias-disable; + }; + }; + + qup_i2c16_default: qup-i2c16-default { + mux { + pins = "gpio86", "gpio85"; + function = "qup16"; + }; + + config { + pins = "gpio86", "gpio85"; + drive-strength = <0x02>; + bias-disable; + }; + }; + + qup_i2c17_default: qup-i2c17-default { + mux { + pins = "gpio55", "gpio56"; + function = "qup17"; + }; + + config { + pins = "gpio55", "gpio56"; + drive-strength = <0x02>; + bias-disable; + }; + }; + + qup_i2c18_default: qup-i2c18-default { + mux { + pins = "gpio23", "gpio24"; + function = "qup18"; + }; + + config { + pins = "gpio23", "gpio24"; + drive-strength = <0x02>; + bias-disable; + }; + }; + + qup_i2c19_default: qup-i2c19-default { + mux { + pins = "gpio57", "gpio58"; + function = "qup19"; + }; + + config { + pins = "gpio57", "gpio58"; + drive-strength = <0x02>; + bias-disable; + }; + }; }; remoteproc_mpss: remoteproc@4080000 { @@ -1612,7 +2161,6 @@ <0 0x088e8000 0 0x10>; reg-names = "reg-base", "dp_com"; status = "disabled"; - #clock-cells = <1>; #address-cells = <2>; #size-cells = <2>; ranges; @@ -1634,6 +2182,7 @@ <0 0x088e9600 0 0x200>, <0 0x088e9800 0 0x200>, <0 0x088e9a00 0 0x100>; + #clock-cells = <0>; #phy-cells = <0>; clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; clock-names = "pipe0"; @@ -1659,7 +2208,6 @@ compatible = "qcom,sm8150-qmp-usb3-uni-phy"; reg = <0 0x088eb000 0 0x200>; status = "disabled"; - #clock-cells = <1>; #address-cells = <2>; #size-cells = <2>; ranges; @@ -1679,6 +2227,7 @@ <0 0x088eb400 0 0x200>, <0 0x088eb800 0 0x800>, <0 0x088eb600 0 0x200>; + #clock-cells = <0>; #phy-cells = <0>; clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>; clock-names = "pipe0"; diff --git a/dts/src/arm64/qcom/sm8250-mtp.dts b/dts/src/arm64/qcom/sm8250-mtp.dts index 5b4c5b0843..cfc4d1febe 100644 --- a/dts/src/arm64/qcom/sm8250-mtp.dts +++ b/dts/src/arm64/qcom/sm8250-mtp.dts @@ -601,10 +601,6 @@ }; }; -&pm8150_rtc { - status = "okay"; -}; - &qupv3_id_0 { status = "okay"; }; diff --git a/dts/src/arm64/qcom/sm8250.dtsi b/dts/src/arm64/qcom/sm8250.dtsi index 947e1accae..4c0de12aab 100644 --- a/dts/src/arm64/qcom/sm8250.dtsi +++ b/dts/src/arm64/qcom/sm8250.dtsi @@ -17,6 +17,7 @@ #include <dt-bindings/soc/qcom,rpmh-rsc.h> #include <dt-bindings/sound/qcom,q6afe.h> #include <dt-bindings/thermal/thermal.h> +#include <dt-bindings/clock/qcom,videocc-sm8250.h> / { interrupt-parent = <&intc>; @@ -279,7 +280,7 @@ pmu { compatible = "arm,armv8-pmuv3"; - interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>; }; psci { @@ -548,8 +549,6 @@ reg = <0 0x00880000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_spi14_default>; interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; @@ -576,8 +575,6 @@ reg = <0 0x00884000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_spi15_default>; interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; @@ -604,8 +601,6 @@ reg = <0 0x00888000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_spi16_default>; interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; @@ -632,8 +627,6 @@ reg = <0 0x0088c000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_spi17_default>; interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; @@ -673,8 +666,6 @@ reg = <0 0x00890000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_spi18_default>; interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; @@ -714,8 +705,6 @@ reg = <0 0x00894000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_spi19_default>; interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; @@ -755,8 +744,6 @@ reg = <0 0x00980000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_spi0_default>; interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; @@ -783,8 +770,6 @@ reg = <0 0x00984000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_spi1_default>; interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; @@ -811,8 +796,6 @@ reg = <0 0x00988000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_spi2_default>; interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; @@ -852,8 +835,6 @@ reg = <0 0x0098c000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_spi3_default>; interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; @@ -880,8 +861,6 @@ reg = <0 0x00990000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_spi4_default>; interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; @@ -908,8 +887,6 @@ reg = <0 0x00994000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_spi5_default>; interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; @@ -936,8 +913,6 @@ reg = <0 0x00998000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_spi6_default>; interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; @@ -977,8 +952,6 @@ reg = <0 0x0099c000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_spi7_default>; interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; @@ -1018,8 +991,6 @@ reg = <0 0x00a80000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_spi8_default>; interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; @@ -1046,8 +1017,6 @@ reg = <0 0x00a84000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_spi9_default>; interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; @@ -1074,8 +1043,6 @@ reg = <0 0x00a88000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_spi10_default>; interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; @@ -1102,8 +1069,6 @@ reg = <0 0x00a8c000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_spi11_default>; interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; @@ -1130,8 +1095,6 @@ reg = <0 0x00a90000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_spi12_default>; interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; @@ -1171,8 +1134,6 @@ reg = <0 0x00a94000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_spi13_default>; interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; @@ -2097,12 +2058,11 @@ }; usb_1_qmpphy: phy@88e9000 { - compatible = "qcom,sm8250-qmp-usb3-phy"; + compatible = "qcom,sm8250-qmp-usb3-dp-phy"; reg = <0 0x088e9000 0 0x200>, - <0 0x088e8000 0 0x20>; - reg-names = "reg-base", "dp_com"; + <0 0x088e8000 0 0x40>, + <0 0x088ea000 0 0x200>; status = "disabled"; - #clock-cells = <1>; #address-cells = <2>; #size-cells = <2>; ranges; @@ -2116,25 +2076,39 @@ <&gcc GCC_USB3_PHY_PRIM_BCR>; reset-names = "phy", "common"; - usb_1_ssphy: lanes@88e9200 { + usb_1_ssphy: usb3-phy@88e9200 { reg = <0 0x088e9200 0 0x200>, <0 0x088e9400 0 0x200>, <0 0x088e9c00 0 0x400>, <0 0x088e9600 0 0x200>, <0 0x088e9800 0 0x200>, <0 0x088e9a00 0 0x100>; + #clock-cells = <0>; #phy-cells = <0>; clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; clock-names = "pipe0"; clock-output-names = "usb3_phy_pipe_clk_src"; }; + + dp_phy: dp-phy@88ea200 { + reg = <0 0x088ea200 0 0x200>, + <0 0x088ea400 0 0x200>, + <0 0x088eac00 0 0x400>, + <0 0x088ea600 0 0x200>, + <0 0x088ea800 0 0x200>, + <0 0x088eaa00 0 0x100>; + #phy-cells = <0>; + #clock-cells = <1>; + clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "usb3_phy_pipe_clk_src"; + }; }; usb_2_qmpphy: phy@88eb000 { compatible = "qcom,sm8250-qmp-usb3-uni-phy"; reg = <0 0x088eb000 0 0x200>; status = "disabled"; - #clock-cells = <1>; #address-cells = <2>; #size-cells = <2>; ranges; @@ -2153,6 +2127,7 @@ reg = <0 0x088eb200 0 0x200>, <0 0x088eb400 0 0x200>, <0 0x088eb800 0 0x800>; + #clock-cells = <0>; #phy-cells = <0>; clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>; clock-names = "pipe0"; @@ -2322,15 +2297,86 @@ }; }; + venus: video-codec@aa00000 { + compatible = "qcom,sm8250-venus"; + reg = <0 0x0aa00000 0 0x100000>; + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&videocc MVS0C_GDSC>, + <&videocc MVS0_GDSC>, + <&rpmhpd SM8250_MX>; + power-domain-names = "venus", "vcodec0", "mx"; + operating-points-v2 = <&venus_opp_table>; + + clocks = <&gcc GCC_VIDEO_AXI0_CLK>, + <&videocc VIDEO_CC_MVS0C_CLK>, + <&videocc VIDEO_CC_MVS0_CLK>; + clock-names = "iface", "core", "vcodec0_core"; + + interconnects = <&gem_noc MASTER_AMPSS_M0 &config_noc SLAVE_VENUS_CFG>, + <&mmss_noc MASTER_VIDEO_P0 &mc_virt SLAVE_EBI_CH0>; + interconnect-names = "cpu-cfg", "video-mem"; + + iommus = <&apps_smmu 0x2100 0x0400>; + memory-region = <&video_mem>; + + resets = <&gcc GCC_VIDEO_AXI0_CLK_ARES>, + <&videocc VIDEO_CC_MVS0C_CLK_ARES>; + reset-names = "bus", "core"; + + video-decoder { + compatible = "venus-decoder"; + }; + + video-encoder { + compatible = "venus-encoder"; + }; + + venus_opp_table: venus-opp-table { + compatible = "operating-points-v2"; + + opp-720000000 { + opp-hz = /bits/ 64 <720000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-1014000000 { + opp-hz = /bits/ 64 <1014000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-1098000000 { + opp-hz = /bits/ 64 <1098000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-1332000000 { + opp-hz = /bits/ 64 <1332000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + videocc: clock-controller@abf0000 { + compatible = "qcom,sm8250-videocc"; + reg = <0 0x0abf0000 0 0x10000>; + clocks = <&gcc GCC_VIDEO_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&rpmhcc RPMH_CXO_CLK_A>; + mmcx-supply = <&mmcx_reg>; + clock-names = "iface", "bi_tcxo", "bi_tcxo_ao"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + mdss: mdss@ae00000 { compatible = "qcom,sdm845-mdss"; reg = <0 0x0ae00000 0 0x1000>; reg-names = "mdss"; - interconnects = <&gem_noc MASTER_AMPSS_M0 &config_noc SLAVE_DISPLAY_CFG>, - <&mmss_noc MASTER_MDP_PORT0 &mc_virt SLAVE_EBI_CH0>, + interconnects = <&mmss_noc MASTER_MDP_PORT0 &mc_virt SLAVE_EBI_CH0>, <&mmss_noc MASTER_MDP_PORT1 &mc_virt SLAVE_EBI_CH0>; - interconnect-names = "notused", "mdp0-mem", "mdp1-mem"; + interconnect-names = "mdp0-mem", "mdp1-mem"; power-domains = <&dispcc MDSS_GDSC>; @@ -2580,36 +2626,22 @@ dispcc: clock-controller@af00000 { compatible = "qcom,sm8250-dispcc"; - reg = <0 0x0af00000 0 0x20000>; + reg = <0 0x0af00000 0 0x10000>; mmcx-supply = <&mmcx_reg>; clocks = <&rpmhcc RPMH_CXO_CLK>, <&dsi0_phy 0>, <&dsi0_phy 1>, <&dsi1_phy 0>, <&dsi1_phy 1>, - <0>, - <0>, - <0>, - <0>, - <0>, - <0>, - <0>, - <0>, - <&sleep_clk>; + <&dp_phy 0>, + <&dp_phy 1>; clock-names = "bi_tcxo", "dsi0_phy_pll_out_byteclk", "dsi0_phy_pll_out_dsiclk", "dsi1_phy_pll_out_byteclk", "dsi1_phy_pll_out_dsiclk", - "dp_link_clk_divsel_ten", - "dp_vco_divided_clk_src_mux", - "dptx1_phy_pll_link_clk", - "dptx1_phy_pll_vco_div_clk", - "dptx2_phy_pll_link_clk", - "dptx2_phy_pll_vco_div_clk", - "edp_phy_pll_link_clk", - "edp_phy_pll_vco_div_clk", - "sleep_clk"; + "dp_phy_pll_link_clk", + "dp_phy_pll_vco_div_clk"; #clock-cells = <1>; #reset-cells = <1>; #power-domain-cells = <1>; @@ -2647,7 +2679,7 @@ #thermal-sensor-cells = <1>; }; - aoss_qmp: qmp@c300000 { + aoss_qmp: power-controller@c300000 { compatible = "qcom,sm8250-aoss-qmp"; reg = <0 0x0c300000 0 0x100000>; interrupts-extended = <&ipcc IPCC_CLIENT_AOP @@ -2689,7 +2721,7 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; - gpio-ranges = <&tlmm 0 0 180>; + gpio-ranges = <&tlmm 0 0 181>; wakeup-parent = <&pdc>; pri_mi2s_active: pri-mi2s-active { @@ -2983,304 +3015,324 @@ }; }; - qup_spi0_default: qup-spi0-default { - mux { - pins = "gpio28", "gpio29", - "gpio30", "gpio31"; - function = "qup0"; - }; + qup_spi0_cs: qup-spi0-cs { + pins = "gpio31"; + function = "qup0"; + }; - config { - pins = "gpio28", "gpio29", - "gpio30", "gpio31"; - drive-strength = <6>; - bias-disable; - }; + qup_spi0_cs_gpio: qup-spi0-cs-gpio { + pins = "gpio31"; + function = "gpio"; }; - qup_spi1_default: qup-spi1-default { - mux { - pins = "gpio4", "gpio5", - "gpio6", "gpio7"; - function = "qup1"; - }; + qup_spi0_data_clk: qup-spi0-data-clk { + pins = "gpio28", "gpio29", + "gpio30"; + function = "qup0"; + }; - config { - pins = "gpio4", "gpio5", - "gpio6", "gpio7"; - drive-strength = <6>; - bias-disable; - }; + qup_spi1_cs: qup-spi1-cs { + pins = "gpio7"; + function = "qup1"; }; - qup_spi2_default: qup-spi2-default { - mux { - pins = "gpio115", "gpio116", - "gpio117", "gpio118"; - function = "qup2"; - }; + qup_spi1_cs_gpio: qup-spi1-cs-gpio { + pins = "gpio7"; + function = "gpio"; + }; - config { - pins = "gpio115", "gpio116", - "gpio117", "gpio118"; - drive-strength = <6>; - bias-disable; - }; + qup_spi1_data_clk: qup-spi1-data-clk { + pins = "gpio4", "gpio5", + "gpio6"; + function = "qup1"; }; - qup_spi3_default: qup-spi3-default { - mux { - pins = "gpio119", "gpio120", - "gpio121", "gpio122"; - function = "qup3"; - }; + qup_spi2_cs: qup-spi2-cs { + pins = "gpio118"; + function = "qup2"; + }; - config { - pins = "gpio119", "gpio120", - "gpio121", "gpio122"; - drive-strength = <6>; - bias-disable; - }; + qup_spi2_cs_gpio: qup-spi2-cs-gpio { + pins = "gpio118"; + function = "gpio"; }; - qup_spi4_default: qup-spi4-default { - mux { - pins = "gpio8", "gpio9", - "gpio10", "gpio11"; - function = "qup4"; - }; + qup_spi2_data_clk: qup-spi2-data-clk { + pins = "gpio115", "gpio116", + "gpio117"; + function = "qup2"; + }; - config { - pins = "gpio8", "gpio9", - "gpio10", "gpio11"; - drive-strength = <6>; - bias-disable; - }; + qup_spi3_cs: qup-spi3-cs { + pins = "gpio122"; + function = "qup3"; }; - qup_spi5_default: qup-spi5-default { - mux { - pins = "gpio12", "gpio13", - "gpio14", "gpio15"; - function = "qup5"; - }; + qup_spi3_cs_gpio: qup-spi3-cs-gpio { + pins = "gpio122"; + function = "gpio"; + }; - config { - pins = "gpio12", "gpio13", - "gpio14", "gpio15"; - drive-strength = <6>; - bias-disable; - }; + qup_spi3_data_clk: qup-spi3-data-clk { + pins = "gpio119", "gpio120", + "gpio121"; + function = "qup3"; }; - qup_spi6_default: qup-spi6-default { - mux { - pins = "gpio16", "gpio17", - "gpio18", "gpio19"; - function = "qup6"; - }; + qup_spi4_cs: qup-spi4-cs { + pins = "gpio11"; + function = "qup4"; + }; - config { - pins = "gpio16", "gpio17", - "gpio18", "gpio19"; - drive-strength = <6>; - bias-disable; - }; + qup_spi4_cs_gpio: qup-spi4-cs-gpio { + pins = "gpio11"; + function = "gpio"; }; - qup_spi7_default: qup-spi7-default { - mux { - pins = "gpio20", "gpio21", - "gpio22", "gpio23"; - function = "qup7"; - }; + qup_spi4_data_clk: qup-spi4-data-clk { + pins = "gpio8", "gpio9", + "gpio10"; + function = "qup4"; + }; - config { - pins = "gpio20", "gpio21", - "gpio22", "gpio23"; - drive-strength = <6>; - bias-disable; - }; + qup_spi5_cs: qup-spi5-cs { + pins = "gpio15"; + function = "qup5"; }; - qup_spi8_default: qup-spi8-default { - mux { - pins = "gpio24", "gpio25", - "gpio26", "gpio27"; - function = "qup8"; - }; + qup_spi5_cs_gpio: qup-spi5-cs-gpio { + pins = "gpio15"; + function = "gpio"; + }; - config { - pins = "gpio24", "gpio25", - "gpio26", "gpio27"; - drive-strength = <6>; - bias-disable; - }; + qup_spi5_data_clk: qup-spi5-data-clk { + pins = "gpio12", "gpio13", + "gpio14"; + function = "qup5"; }; - qup_spi9_default: qup-spi9-default { - mux { - pins = "gpio125", "gpio126", - "gpio127", "gpio128"; - function = "qup9"; - }; + qup_spi6_cs: qup-spi6-cs { + pins = "gpio19"; + function = "qup6"; + }; - config { - pins = "gpio125", "gpio126", - "gpio127", "gpio128"; - drive-strength = <6>; - bias-disable; - }; + qup_spi6_cs_gpio: qup-spi6-cs-gpio { + pins = "gpio19"; + function = "gpio"; }; - qup_spi10_default: qup-spi10-default { - mux { - pins = "gpio129", "gpio130", - "gpio131", "gpio132"; - function = "qup10"; - }; + qup_spi6_data_clk: qup-spi6-data-clk { + pins = "gpio16", "gpio17", + "gpio18"; + function = "qup6"; + }; - config { - pins = "gpio129", "gpio130", - "gpio131", "gpio132"; - drive-strength = <6>; - bias-disable; - }; + qup_spi7_cs: qup-spi7-cs { + pins = "gpio23"; + function = "qup7"; }; - qup_spi11_default: qup-spi11-default { - mux { - pins = "gpio60", "gpio61", - "gpio62", "gpio63"; - function = "qup11"; - }; + qup_spi7_cs_gpio: qup-spi7-cs-gpio { + pins = "gpio23"; + function = "gpio"; + }; - config { - pins = "gpio60", "gpio61", - "gpio62", "gpio63"; - drive-strength = <6>; - bias-disable; - }; + qup_spi7_data_clk: qup-spi7-data-clk { + pins = "gpio20", "gpio21", + "gpio22"; + function = "qup7"; }; - qup_spi12_default: qup-spi12-default { - mux { - pins = "gpio32", "gpio33", - "gpio34", "gpio35"; - function = "qup12"; - }; + qup_spi8_cs: qup-spi8-cs { + pins = "gpio27"; + function = "qup8"; + }; - config { - pins = "gpio32", "gpio33", - "gpio34", "gpio35"; - drive-strength = <6>; - bias-disable; - }; + qup_spi8_cs_gpio: qup-spi8-cs-gpio { + pins = "gpio27"; + function = "gpio"; }; - qup_spi13_default: qup-spi13-default { - mux { - pins = "gpio36", "gpio37", - "gpio38", "gpio39"; - function = "qup13"; - }; + qup_spi8_data_clk: qup-spi8-data-clk { + pins = "gpio24", "gpio25", + "gpio26"; + function = "qup8"; + }; - config { - pins = "gpio36", "gpio37", - "gpio38", "gpio39"; - drive-strength = <6>; - bias-disable; - }; + qup_spi9_cs: qup-spi9-cs { + pins = "gpio128"; + function = "qup9"; }; - qup_spi14_default: qup-spi14-default { - mux { - pins = "gpio40", "gpio41", - "gpio42", "gpio43"; - function = "qup14"; - }; + qup_spi9_cs_gpio: qup-spi9-cs-gpio { + pins = "gpio128"; + function = "gpio"; + }; - config { - pins = "gpio40", "gpio41", - "gpio42", "gpio43"; - drive-strength = <6>; - bias-disable; - }; + qup_spi9_data_clk: qup-spi9-data-clk { + pins = "gpio125", "gpio126", + "gpio127"; + function = "qup9"; }; - qup_spi15_default: qup-spi15-default { - mux { - pins = "gpio44", "gpio45", - "gpio46", "gpio47"; - function = "qup15"; - }; + qup_spi10_cs: qup-spi10-cs { + pins = "gpio132"; + function = "qup10"; + }; - config { - pins = "gpio44", "gpio45", - "gpio46", "gpio47"; - drive-strength = <6>; - bias-disable; - }; + qup_spi10_cs_gpio: qup-spi10-cs-gpio { + pins = "gpio132"; + function = "gpio"; }; - qup_spi16_default: qup-spi16-default { - mux { - pins = "gpio48", "gpio49", - "gpio50", "gpio51"; - function = "qup16"; - }; + qup_spi10_data_clk: qup-spi10-data-clk { + pins = "gpio129", "gpio130", + "gpio131"; + function = "qup10"; + }; - config { - pins = "gpio48", "gpio49", - "gpio50", "gpio51"; - drive-strength = <6>; - bias-disable; - }; + qup_spi11_cs: qup-spi11-cs { + pins = "gpio63"; + function = "qup11"; }; - qup_spi17_default: qup-spi17-default { - mux { - pins = "gpio52", "gpio53", - "gpio54", "gpio55"; - function = "qup17"; - }; + qup_spi11_cs_gpio: qup-spi11-cs-gpio { + pins = "gpio63"; + function = "gpio"; + }; - config { - pins = "gpio52", "gpio53", - "gpio54", "gpio55"; - drive-strength = <6>; - bias-disable; - }; + qup_spi11_data_clk: qup-spi11-data-clk { + pins = "gpio60", "gpio61", + "gpio62"; + function = "qup11"; }; - qup_spi18_default: qup-spi18-default { - mux { - pins = "gpio56", "gpio57", - "gpio58", "gpio59"; - function = "qup18"; - }; + qup_spi12_cs: qup-spi12-cs { + pins = "gpio35"; + function = "qup12"; + }; - config { - pins = "gpio56", "gpio57", - "gpio58", "gpio59"; - drive-strength = <6>; - bias-disable; - }; + qup_spi12_cs_gpio: qup-spi12-cs-gpio { + pins = "gpio35"; + function = "gpio"; }; - qup_spi19_default: qup-spi19-default { - mux { - pins = "gpio0", "gpio1", - "gpio2", "gpio3"; - function = "qup19"; - }; + qup_spi12_data_clk: qup-spi12-data-clk { + pins = "gpio32", "gpio33", + "gpio34"; + function = "qup12"; + }; - config { - pins = "gpio0", "gpio1", - "gpio2", "gpio3"; - drive-strength = <6>; - bias-disable; - }; + qup_spi13_cs: qup-spi13-cs { + pins = "gpio39"; + function = "qup13"; + }; + + qup_spi13_cs_gpio: qup-spi13-cs-gpio { + pins = "gpio39"; + function = "gpio"; + }; + + qup_spi13_data_clk: qup-spi13-data-clk { + pins = "gpio36", "gpio37", + "gpio38"; + function = "qup13"; + }; + + qup_spi14_cs: qup-spi14-cs { + pins = "gpio43"; + function = "qup14"; + }; + + qup_spi14_cs_gpio: qup-spi14-cs-gpio { + pins = "gpio43"; + function = "gpio"; + }; + + qup_spi14_data_clk: qup-spi14-data-clk { + pins = "gpio40", "gpio41", + "gpio42"; + function = "qup14"; + }; + + qup_spi15_cs: qup-spi15-cs { + pins = "gpio47"; + function = "qup15"; + }; + + qup_spi15_cs_gpio: qup-spi15-cs-gpio { + pins = "gpio47"; + function = "gpio"; + }; + + qup_spi15_data_clk: qup-spi15-data-clk { + pins = "gpio44", "gpio45", + "gpio46"; + function = "qup15"; + }; + + qup_spi16_cs: qup-spi16-cs { + pins = "gpio51"; + function = "qup16"; + }; + + qup_spi16_cs_gpio: qup-spi16-cs-gpio { + pins = "gpio51"; + function = "gpio"; + }; + + qup_spi16_data_clk: qup-spi16-data-clk { + pins = "gpio48", "gpio49", + "gpio50"; + function = "qup16"; + }; + + qup_spi17_cs: qup-spi17-cs { + pins = "gpio55"; + function = "qup17"; + }; + + qup_spi17_cs_gpio: qup-spi17-cs-gpio { + pins = "gpio55"; + function = "gpio"; + }; + + qup_spi17_data_clk: qup-spi17-data-clk { + pins = "gpio52", "gpio53", + "gpio54"; + function = "qup17"; + }; + + qup_spi18_cs: qup-spi18-cs { + pins = "gpio59"; + function = "qup18"; + }; + + qup_spi18_cs_gpio: qup-spi18-cs-gpio { + pins = "gpio59"; + function = "gpio"; + }; + + qup_spi18_data_clk: qup-spi18-data-clk { + pins = "gpio56", "gpio57", + "gpio58"; + function = "qup18"; + }; + + qup_spi19_cs: qup-spi19-cs { + pins = "gpio3"; + function = "qup19"; + }; + + qup_spi19_cs_gpio: qup-spi19-cs-gpio { + pins = "gpio3"; + function = "gpio"; + }; + + qup_spi19_data_clk: qup-spi19-data-clk { + pins = "gpio0", "gpio1", + "gpio2"; + function = "qup19"; }; qup_uart2_default: qup-uart2-default { @@ -3754,7 +3806,7 @@ (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 12 + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; }; diff --git a/dts/src/arm64/qcom/sm8350-hdk.dts b/dts/src/arm64/qcom/sm8350-hdk.dts new file mode 100644 index 0000000000..f23a0cf3f7 --- /dev/null +++ b/dts/src/arm64/qcom/sm8350-hdk.dts @@ -0,0 +1,319 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020-2021, Linaro Limited + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "sm8350.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. SM8350 HDK"; + compatible = "qcom,sm8350-hdk", "qcom,sm8350"; + + aliases { + serial0 = &uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + + regulator-always-on; + regulator-boot-on; + }; +}; + +&adsp { + status = "okay"; + firmware-name = "qcom/sm8350/adsp.mbn"; +}; + +&apps_rsc { + pm8350-rpmh-regulators { + compatible = "qcom,pm8350-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + vdd-s11-supply = <&vph_pwr>; + vdd-s12-supply = <&vph_pwr>; + + vdd-l1-l4-supply = <&vreg_s11b_0p95>; + vdd-l2-l7-supply = <&vreg_bob>; + vdd-l3-l5-supply = <&vreg_bob>; + vdd-l6-l9-l10-supply = <&vreg_s11b_0p95>; + + vreg_s10b_1p8: smps10 { + regulator-name = "vreg_s10b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s11b_0p95: smps11 { + regulator-name = "vreg_s11b_0p95"; + regulator-min-microvolt = <952000>; + regulator-max-microvolt = <952000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s12b_1p25: smps12 { + regulator-name = "vreg_s12b_1p25"; + regulator-min-microvolt = <1256000>; + regulator-max-microvolt = <1256000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1b_0p88: ldo1 { + regulator-name = "vreg_l1b_0p88"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2b_3p07: ldo2 { + regulator-name = "vreg_l2b_3p07"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3b_0p9: ldo3 { + regulator-name = "vreg_l3b_0p9"; + regulator-min-microvolt = <904000>; + regulator-max-microvolt = <904000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5b_0p88: ldo5 { + regulator-name = "vreg_l5b_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <888000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + + vreg_l6b_1p2: ldo6 { + regulator-name = "vreg_l6b_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1208000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + + vreg_l7b_2p96: ldo7 { + regulator-name = "vreg_l7b_2p96"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2504000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + + vreg_l9b_1p2: ldo9 { + regulator-name = "vreg_l9b_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + }; + + pm8350c-rpmh-regulators { + compatible = "qcom,pm8350c-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + + vdd-l1-l12-supply = <&vreg_s1c_1p86>; + vdd-l2-l8-supply = <&vreg_s1c_1p86>; + vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>; + vdd-l6-l9-l11-supply = <&vreg_bob>; + vdd-l10-supply = <&vreg_s12b_1p25>; + + vdd-bob-supply = <&vph_pwr>; + + vreg_s1c_1p86: smps1 { + regulator-name = "vreg_s1c_1p86"; + regulator-min-microvolt = <1856000>; + regulator-max-microvolt = <1880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_bob: bob { + regulator-name = "vreg_bob"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + }; + + vreg_l1c_1p8: ldo1 { + regulator-name = "vreg_l1c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2c_1p8: ldo2 { + regulator-name = "vreg_l2c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6c_1p8: ldo6 { + regulator-name = "vreg_l6c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9c_2p96: ldo9 { + regulator-name = "vreg_l9c_2p96"; + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10c_1p2: ldo10 { + regulator-name = "vreg_l10c_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; +}; + +&cdsp { + status = "okay"; + firmware-name = "qcom/sm8350/cdsp.mbn"; +}; + +&mpss { + status = "okay"; + firmware-name = "qcom/sm8350/modem.mbn"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&slpi { + status = "okay"; + firmware-name = "qcom/sm8350/slpi.mbn"; +}; + +&tlmm { + gpio-reserved-ranges = <52 8>; +}; + +&uart2 { + status = "okay"; +}; + +&ufs_mem_hc { + status = "okay"; + + reset-gpios = <&tlmm 203 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l7b_2p96>; + vcc-max-microamp = <800000>; + vccq-supply = <&vreg_l9b_1p2>; + vccq-max-microamp = <900000>; +}; + +&ufs_mem_phy { + status = "okay"; + + vdda-phy-supply = <&vreg_l5b_0p88>; + vdda-max-microamp = <91600>; + vdda-pll-supply = <&vreg_l6b_1p2>; + vdda-pll-max-microamp = <19000>; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + /* TODO: Define USB-C connector properly */ + dr_mode = "peripheral"; +}; + +&usb_1_hsphy { + status = "okay"; + + vdda-pll-supply = <&vreg_l5b_0p88>; + vdda18-supply = <&vreg_l1c_1p8>; + vdda33-supply = <&vreg_l2b_3p07>; +}; + +&usb_1_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vreg_l6b_1p2>; + vdda-pll-supply = <&vreg_l1b_0p88>; +}; + +&usb_2 { + status = "okay"; +}; + +&usb_2_dwc3 { + dr_mode = "host"; + + pinctrl-names = "default"; + pinctrl-0 = <&usb_hub_enabled_state>; +}; + +&usb_2_hsphy { + status = "okay"; + + vdda-pll-supply = <&vreg_l5b_0p88>; + vdda18-supply = <&vreg_l1c_1p8>; + vdda33-supply = <&vreg_l2b_3p07>; +}; + +&usb_2_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vreg_l6b_1p2>; + vdda-pll-supply = <&vreg_l5b_0p88>; +}; + +/* PINCTRL - additions to nodes defined in sm8350.dtsi */ + +&tlmm { + usb_hub_enabled_state: usb-hub-enabled-state { + pins = "gpio42"; + function = "gpio"; + + drive-strength = <2>; + output-low; + }; +}; diff --git a/dts/src/arm64/qcom/sm8350-mtp.dts b/dts/src/arm64/qcom/sm8350-mtp.dts index 8923657579..6ca638b4e3 100644 --- a/dts/src/arm64/qcom/sm8350-mtp.dts +++ b/dts/src/arm64/qcom/sm8350-mtp.dts @@ -5,8 +5,15 @@ /dts-v1/; +#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include "sm8350.dtsi" +#include "pm8350.dtsi" +#include "pm8350b.dtsi" +#include "pm8350c.dtsi" +#include "pmk8350.dtsi" +#include "pmr735a.dtsi" +#include "pmr735b.dtsi" / { model = "Qualcomm Technologies, Inc. sm8350 MTP"; @@ -31,6 +38,11 @@ }; }; +&adsp { + status = "okay"; + firmware-name = "qcom/sm8350/adsp.mbn"; +}; + &apps_rsc { pm8350-rpmh-regulators { compatible = "qcom,pm8350-rpmh-regulators"; @@ -56,57 +68,67 @@ vdd-l8-supply = <&vreg_s2c_0p8>; vreg_s10b_1p8: smps10 { + regulator-name = "vreg_s10b_1p8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; vreg_s11b_0p95: smps11 { + regulator-name = "vreg_s11b_0p95"; regulator-min-microvolt = <752000>; regulator-max-microvolt = <1000000>; }; vreg_s12b_1p25: smps12 { + regulator-name = "vreg_s12b_1p25"; regulator-min-microvolt = <1224000>; regulator-max-microvolt = <1360000>; }; vreg_l1b_0p88: ldo1 { + regulator-name = "vreg_l1b_0p88"; regulator-min-microvolt = <912000>; regulator-max-microvolt = <920000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l2b_3p07: ldo2 { + regulator-name = "vreg_l2b_3p07"; regulator-min-microvolt = <3072000>; regulator-max-microvolt = <3072000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l3b_0p9: ldo3 { + regulator-name = "vreg_l3b_0p9"; regulator-min-microvolt = <904000>; regulator-max-microvolt = <904000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l5b_0p88: ldo5 { + regulator-name = "vreg_l3b_0p9"; regulator-min-microvolt = <880000>; regulator-max-microvolt = <888000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l6b_1p2: ldo6 { + regulator-name = "vreg_l6b_1p2"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1208000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l7b_2p96: ldo7 { + regulator-name = "vreg_l7b_2p96"; regulator-min-microvolt = <2400000>; regulator-max-microvolt = <3008000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l9b_1p2: ldo9 { + regulator-name = "vreg_l9b_1p2"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; @@ -137,99 +159,116 @@ vdd-bob-supply = <&vph_pwr>; vreg_s1c_1p86: smps1 { + regulator-name = "vreg_s1c_1p86"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1952000>; }; vreg_s2c_0p8: smps2 { + regulator-name = "vreg_s2c_0p8"; regulator-min-microvolt = <640000>; regulator-max-microvolt = <1000000>; }; vreg_s10c_1p05: smps10 { + regulator-name = "vreg_s10c_1p05"; regulator-min-microvolt = <1048000>; regulator-max-microvolt = <1128000>; }; vreg_bob: bob { + regulator-name = "vreg_bob"; regulator-min-microvolt = <3008000>; regulator-max-microvolt = <3960000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; }; vreg_l1c_1p8: ldo1 { + regulator-name = "vreg_l1c_1p8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l2c_1p8: ldo2 { + regulator-name = "vreg_l2c_1p8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l3c_3p0: ldo3 { + regulator-name = "vreg_l3c_3p0"; regulator-min-microvolt = <3008000>; regulator-max-microvolt = <3008000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l4c_uim1: ldo4 { + regulator-name = "vreg_l4c_uim1"; regulator-min-microvolt = <1704000>; regulator-max-microvolt = <3000000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l5c_uim2: ldo5 { + regulator-name = "vreg_l5c_uim2"; regulator-min-microvolt = <1704000>; regulator-max-microvolt = <3000000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l6c_1p8: ldo6 { + regulator-name = "vreg_l6c_1p8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <2960000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l7c_3p0: ldo7 { + regulator-name = "vreg_l7c_3p0"; regulator-min-microvolt = <3008000>; regulator-max-microvolt = <3008000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l8c_1p8: ldo8 { + regulator-name = "vreg_l8c_1p8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l9c_2p96: ldo9 { + regulator-name = "vreg_l9c_2p96"; regulator-min-microvolt = <2960000>; regulator-max-microvolt = <3008000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l10c_1p2: ldo10 { + regulator-name = "vreg_l10c_1p2"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l11c_2p96: ldo11 { + regulator-name = "vreg_l11c_2p96"; regulator-min-microvolt = <2400000>; regulator-max-microvolt = <3008000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l12c_1p8: ldo12 { + regulator-name = "vreg_l12c_1p8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <2000000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l13c_3p0: ldo13 { + regulator-name = "vreg_l13c_3p0"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; @@ -237,10 +276,25 @@ }; }; +&cdsp { + status = "okay"; + firmware-name = "qcom/sm8350/cdsp.mbn"; +}; + +&mpss { + status = "okay"; + firmware-name = "qcom/sm8350/modem.mbn"; +}; + &qupv3_id_1 { status = "okay"; }; +&slpi { + status = "okay"; + firmware-name = "qcom/sm8350/slpi.mbn"; +}; + &tlmm { gpio-reserved-ranges = <52 8>; }; @@ -248,3 +302,65 @@ &uart2 { status = "okay"; }; + +&ufs_mem_hc { + status = "okay"; + + reset-gpios = <&tlmm 203 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l7b_2p96>; + vcc-max-microamp = <800000>; + vccq-supply = <&vreg_l9b_1p2>; + vccq-max-microamp = <900000>; +}; + +&ufs_mem_phy { + status = "okay"; + + vdda-phy-supply = <&vreg_l5b_0p88>; + vdda-max-microamp = <91600>; + vdda-pll-supply = <&vreg_l6b_1p2>; + vdda-pll-max-microamp = <19000>; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "peripheral"; +}; + +&usb_1_hsphy { + status = "okay"; + + vdda-pll-supply = <&vreg_l5b_0p88>; + vdda18-supply = <&vreg_l1c_1p8>; + vdda33-supply = <&vreg_l2b_3p07>; +}; + +&usb_1_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vreg_l6b_1p2>; + vdda-pll-supply = <&vreg_l1b_0p88>; +}; + +&usb_2 { + status = "okay"; +}; + +&usb_2_hsphy { + status = "okay"; + + vdda-pll-supply = <&vreg_l5b_0p88>; + vdda18-supply = <&vreg_l1c_1p8>; + vdda33-supply = <&vreg_l2b_3p07>; +}; + +&usb_2_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vreg_l6b_1p2>; + vdda-pll-supply = <&vreg_l5b_0p88>; +}; diff --git a/dts/src/arm64/qcom/sm8350.dtsi b/dts/src/arm64/qcom/sm8350.dtsi index 5ef460458f..ed0b51bc03 100644 --- a/dts/src/arm64/qcom/sm8350.dtsi +++ b/dts/src/arm64/qcom/sm8350.dtsi @@ -1,14 +1,16 @@ // SPDX-License-Identifier: BSD-3-Clause /* - * Copyright (c) 2020, Linaro Limaited + * Copyright (c) 2020, Linaro Limited */ #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/qcom,gcc-sm8350.h> #include <dt-bindings/clock/qcom,rpmh.h> #include <dt-bindings/mailbox/qcom-ipcc.h> #include <dt-bindings/power/qcom-aoss-qmp.h> #include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/soc/qcom,rpmh-rsc.h> +#include <dt-bindings/thermal/thermal.h> / { interrupt-parent = <&intc>; @@ -43,6 +45,8 @@ reg = <0x0 0x0>; enable-method = "psci"; next-level-cache = <&L2_0>; + qcom,freq-domain = <&cpufreq_hw 0>; + #cooling-cells = <2>; L2_0: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; @@ -58,6 +62,8 @@ reg = <0x0 0x100>; enable-method = "psci"; next-level-cache = <&L2_100>; + qcom,freq-domain = <&cpufreq_hw 0>; + #cooling-cells = <2>; L2_100: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; @@ -70,6 +76,8 @@ reg = <0x0 0x200>; enable-method = "psci"; next-level-cache = <&L2_200>; + qcom,freq-domain = <&cpufreq_hw 0>; + #cooling-cells = <2>; L2_200: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; @@ -82,6 +90,8 @@ reg = <0x0 0x300>; enable-method = "psci"; next-level-cache = <&L2_300>; + qcom,freq-domain = <&cpufreq_hw 0>; + #cooling-cells = <2>; L2_300: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; @@ -94,6 +104,8 @@ reg = <0x0 0x400>; enable-method = "psci"; next-level-cache = <&L2_400>; + qcom,freq-domain = <&cpufreq_hw 1>; + #cooling-cells = <2>; L2_400: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; @@ -106,6 +118,8 @@ reg = <0x0 0x500>; enable-method = "psci"; next-level-cache = <&L2_500>; + qcom,freq-domain = <&cpufreq_hw 1>; + #cooling-cells = <2>; L2_500: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; @@ -119,6 +133,8 @@ reg = <0x0 0x600>; enable-method = "psci"; next-level-cache = <&L2_600>; + qcom,freq-domain = <&cpufreq_hw 1>; + #cooling-cells = <2>; L2_600: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; @@ -131,6 +147,8 @@ reg = <0x0 0x700>; enable-method = "psci"; next-level-cache = <&L2_700>; + qcom,freq-domain = <&cpufreq_hw 2>; + #cooling-cells = <2>; L2_700: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; @@ -153,7 +171,7 @@ pmu { compatible = "arm,armv8-pmuv3"; - interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>; }; psci { @@ -257,6 +275,15 @@ no-map; }; + rmtfs_mem: memory@9b800000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0 0x9b800000 0x0 0x280000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <15>; + }; + hyp_reserved_mem: memory@d0000000 { reg = <0x0 0xd0000000 0x0 0x800000>; no-map; @@ -294,6 +321,102 @@ hwlocks = <&tcsr_mutex 3>; }; + smp2p-adsp { + compatible = "qcom,smp2p"; + qcom,smem = <443>, <429>; + interrupts-extended = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,local-pid = <0>; + qcom,remote-pid = <2>; + + smp2p_adsp_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_adsp_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-cdsp { + compatible = "qcom,smp2p"; + qcom,smem = <94>, <432>; + interrupts-extended = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,local-pid = <0>; + qcom,remote-pid = <5>; + + smp2p_cdsp_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_cdsp_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-modem { + compatible = "qcom,smp2p"; + qcom,smem = <435>, <428>; + interrupts-extended = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,local-pid = <0>; + qcom,remote-pid = <1>; + + smp2p_modem_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_modem_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-slpi { + compatible = "qcom,smp2p"; + qcom,smem = <481>, <430>; + interrupts-extended = <&ipcc IPCC_CLIENT_SLPI + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_SLPI + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,local-pid = <0>; + qcom,remote-pid = <3>; + + smp2p_slpi_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_slpi_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + soc: soc@0 { #address-cells = <2>; #size-cells = <2>; @@ -324,8 +447,8 @@ compatible = "qcom,geni-se-qup"; reg = <0x0 0x009c0000 0x0 0x6000>; clock-names = "m-ahb", "s-ahb"; - clocks = <&gcc 121>, - <&gcc 122>; + clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; #address-cells = <2>; #size-cells = <2>; ranges; @@ -335,7 +458,7 @@ compatible = "qcom,geni-debug-uart"; reg = <0 0x0098c000 0 0x4000>; clock-names = "se"; - clocks = <&gcc 83>; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; pinctrl-names = "default"; pinctrl-0 = <&qup_uart3_default_state>; interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; @@ -345,12 +468,215 @@ }; }; + apps_smmu: iommu@15000000 { + compatible = "qcom,sm8350-smmu-500", "arm,mmu-500"; + reg = <0 0x15000000 0 0x100000>; + #iommu-cells = <2>; + #global-interrupts = <2>; + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 697 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>; + }; + + config_noc: interconnect@1500000 { + compatible = "qcom,sm8350-config-noc"; + reg = <0 0x01500000 0 0xa580>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + mc_virt: interconnect@1580000 { + compatible = "qcom,sm8350-mc-virt"; + reg = <0 0x01580000 0 0x1000>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + system_noc: interconnect@1680000 { + compatible = "qcom,sm8350-system-noc"; + reg = <0 0x01680000 0 0x1c200>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + aggre1_noc: interconnect@16e0000 { + compatible = "qcom,sm8350-aggre1-noc"; + reg = <0 0x016e0000 0 0x1f180>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + aggre2_noc: interconnect@1700000 { + compatible = "qcom,sm8350-aggre2-noc"; + reg = <0 0x01700000 0 0x33000>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + mmss_noc: interconnect@1740000 { + compatible = "qcom,sm8350-mmss-noc"; + reg = <0 0x01740000 0 0x1f080>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + lpass_ag_noc: interconnect@3c40000 { + compatible = "qcom,sm8350-lpass-ag-noc"; + reg = <0 0x03c40000 0 0xf080>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + compute_noc: interconnect@a0c0000{ + compatible = "qcom,sm8350-compute-noc"; + reg = <0 0x0a0c0000 0 0xa180>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + tcsr_mutex: hwlock@1f40000 { compatible = "qcom,tcsr-mutex"; reg = <0x0 0x01f40000 0x0 0x40000>; #hwlock-cells = <1>; }; + mpss: remoteproc@4080000 { + compatible = "qcom,sm8350-mpss-pas"; + reg = <0x0 0x04080000 0x0 0x4040>; + + interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>, + <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 3 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", "handover", + "stop-ack", "shutdown-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&aoss_qmp AOSS_QMP_LS_MODEM>, + <&rpmhpd 0>, + <&rpmhpd 12>; + power-domain-names = "load_state", "cx", "mss"; + + interconnects = <&mc_virt 0 &mc_virt 1>; + + memory-region = <&pil_modem_mem>; + + qcom,smem-states = <&smp2p_modem_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_GLINK_QMP>; + interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>; + label = "modem"; + qcom,remote-pid = <1>; + }; + }; + pdc: interrupt-controller@b220000 { compatible = "qcom,sm8350-pdc", "qcom,pdc"; reg = <0 0x0b220000 0 0x30000>, <0 0x17c000f0 0 0x60>; @@ -363,7 +689,29 @@ interrupt-controller; }; - aoss_qmp: qmp@c300000 { + tsens0: thermal-sensor@c222000 { + compatible = "qcom,sm8350-tsens", "qcom,tsens-v2"; + reg = <0 0x0c263000 0 0x1ff>, /* TM */ + <0 0x0c222000 0 0x8>; /* SROT */ + #qcom,sensors = <15>; + interrupts = <&pdc 26 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 28 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + }; + + tsens1: thermal-sensor@c223000 { + compatible = "qcom,sm8350-tsens", "qcom,tsens-v2"; + reg = <0 0x0c265000 0 0x1ff>, /* TM */ + <0 0x0c223000 0 0x8>; /* SROT */ + #qcom,sensors = <14>; + interrupts = <&pdc 27 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 29 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + }; + + aoss_qmp: power-controller@c300000 { compatible = "qcom,sm8350-aoss-qmp"; reg = <0 0x0c300000 0 0x100000>; interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP @@ -374,6 +722,24 @@ #power-domain-cells = <1>; }; + spmi_bus: spmi@c440000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0x0 0xc440000 0x0 0x1100>, + <0x0 0xc600000 0x0 0x2000000>, + <0x0 0xe600000 0x0 0x100000>, + <0x0 0xe700000 0x0 0xa0000>, + <0x0 0xc40a000 0x0 0x26000>; + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; + interrupt-names = "periph_irq"; + interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + }; + tlmm: pinctrl@f100000 { compatible = "qcom,sm8350-tlmm"; reg = <0 0x0f100000 0 0x300000>; @@ -382,7 +748,7 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; - gpio-ranges = <&tlmm 0 0 203>; + gpio-ranges = <&tlmm 0 0 204>; qup_uart3_default_state: qup-uart3-default-state { rx { @@ -396,6 +762,13 @@ }; }; + rng: rng@10d3000 { + compatible = "qcom,prng-ee"; + reg = <0 0x010d3000 0 0x1000>; + clocks = <&rpmhcc RPMH_HWKM_CLK>; + clock-names = "core"; + }; + intc: interrupt-controller@17a00000 { compatible = "arm,gic-v3"; #interrupt-cells = <3>; @@ -486,6 +859,1256 @@ clocks = <&xo_board>; }; + rpmhpd: power-controller { + compatible = "qcom,sm8350-rpmhpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmhpd_opp_table>; + + rpmhpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmhpd_opp_ret: opp1 { + opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>; + }; + + rpmhpd_opp_min_svs: opp2 { + opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; + }; + + rpmhpd_opp_low_svs: opp3 { + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + }; + + rpmhpd_opp_svs: opp4 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + }; + + rpmhpd_opp_svs_l1: opp5 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + }; + + rpmhpd_opp_nom: opp6 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM>; + }; + + rpmhpd_opp_nom_l1: opp7 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; + }; + + rpmhpd_opp_nom_l2: opp8 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>; + }; + + rpmhpd_opp_turbo: opp9 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; + }; + + rpmhpd_opp_turbo_l1: opp10 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>; + }; + }; + }; + + apps_bcm_voter: bcm_voter { + compatible = "qcom,bcm-voter"; + }; + }; + + cpufreq_hw: cpufreq@18591000 { + compatible = "qcom,sm8350-cpufreq-epss", "qcom,cpufreq-epss"; + reg = <0 0x18591000 0 0x1000>, + <0 0x18592000 0 0x1000>, + <0 0x18593000 0 0x1000>; + reg-names = "freq-domain0", "freq-domain1", "freq-domain2"; + + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>; + clock-names = "xo", "alternate"; + + #freq-domain-cells = <1>; + }; + + ufs_mem_hc: ufshc@1d84000 { + compatible = "qcom,sm8350-ufshc", "qcom,ufshc", + "jedec,ufs-2.0"; + reg = <0 0x01d84000 0 0x3000>; + interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; + phys = <&ufs_mem_phy_lanes>; + phy-names = "ufsphy"; + lanes-per-direction = <2>; + #reset-cells = <1>; + resets = <&gcc GCC_UFS_PHY_BCR>; + reset-names = "rst"; + + power-domains = <&gcc UFS_PHY_GDSC>; + + iommus = <&apps_smmu 0xe0 0x0>; + + clock-names = + "ref_clk", + "core_clk", + "bus_aggr_clk", + "iface_clk", + "core_clk_unipro", + "ref_clk", + "tx_lane0_sync_clk", + "rx_lane0_sync_clk", + "rx_lane1_sync_clk"; + clocks = + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_UFS_PHY_AXI_CLK>, + <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, + <&gcc GCC_UFS_PHY_AHB_CLK>, + <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>; + freq-table-hz = + <75000000 300000000>, + <75000000 300000000>, + <0 0>, + <0 0>, + <75000000 300000000>, + <0 0>, + <0 0>, + <75000000 300000000>, + <75000000 300000000>; + status = "disabled"; + }; + + ufs_mem_phy: phy@1d87000 { + compatible = "qcom,sm8350-qmp-ufs-phy"; + reg = <0 0x01d87000 0 0xe10>; + #address-cells = <2>; + #size-cells = <2>; + #clock-cells = <1>; + ranges; + clock-names = "ref", + "ref_aux"; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_UFS_PHY_PHY_AUX_CLK>; + + resets = <&ufs_mem_hc 0>; + reset-names = "ufsphy"; + status = "disabled"; + + ufs_mem_phy_lanes: lanes@1d87400 { + reg = <0 0x01d87400 0 0x108>, + <0 0x01d87600 0 0x1e0>, + <0 0x01d87c00 0 0x1dc>, + <0 0x01d87800 0 0x108>, + <0 0x01d87a00 0 0x1e0>; + #phy-cells = <0>; + #clock-cells = <0>; + }; + }; + + slpi: remoteproc@5c00000 { + compatible = "qcom,sm8350-slpi-pas"; + reg = <0 0x05c00000 0 0x4000>; + + interrupts-extended = <&pdc 9 IRQ_TYPE_LEVEL_HIGH>, + <&smp2p_slpi_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_slpi_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_slpi_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_slpi_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&aoss_qmp AOSS_QMP_LS_SLPI>, + <&rpmhpd 4>, + <&rpmhpd 5>; + power-domain-names = "load_state", "lcx", "lmx"; + + memory-region = <&pil_slpi_mem>; + + qcom,smem-states = <&smp2p_slpi_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_SLPI + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_SLPI + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "slpi"; + qcom,remote-pid = <3>; + + }; + }; + + cdsp: remoteproc@98900000 { + compatible = "qcom,sm8350-cdsp-pas"; + reg = <0 0x098900000 0 0x1400000>; + + interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>, + <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&aoss_qmp AOSS_QMP_LS_CDSP>, + <&rpmhpd 0>, + <&rpmhpd 10>; + power-domain-names = "load_state", "cx", "mxc"; + + interconnects = <&compute_noc 1 &mc_virt 1>; + + memory-region = <&pil_cdsp_mem>; + + qcom,smem-states = <&smp2p_cdsp_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "cdsp"; + qcom,remote-pid = <5>; + }; + }; + + usb_1_hsphy: phy@88e3000 { + compatible = "qcom,sm8350-usb-hs-phy", + "qcom,usb-snps-hs-7nm-phy"; + reg = <0 0x088e3000 0 0x400>; + status = "disabled"; + #phy-cells = <0>; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "ref"; + + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + }; + + usb_2_hsphy: phy@88e4000 { + compatible = "qcom,sm8250-usb-hs-phy", + "qcom,usb-snps-hs-7nm-phy"; + reg = <0 0x088e4000 0 0x400>; + status = "disabled"; + #phy-cells = <0>; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "ref"; + + resets = <&gcc GCC_QUSB2PHY_SEC_BCR>; + }; + + usb_1_qmpphy: phy-wrapper@88e9000 { + compatible = "qcom,sm8350-qmp-usb3-phy"; + reg = <0 0x088e9000 0 0x200>, + <0 0x088e8000 0 0x20>; + reg-names = "reg-base", "dp_com"; + status = "disabled"; + #clock-cells = <1>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>; + clock-names = "aux", "ref_clk_src", "com_aux"; + + resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>, + <&gcc GCC_USB3_PHY_PRIM_BCR>; + reset-names = "phy", "common"; + + usb_1_ssphy: phy@88e9200 { + reg = <0 0x088e9200 0 0x200>, + <0 0x088e9400 0 0x200>, + <0 0x088e9c00 0 0x400>, + <0 0x088e9600 0 0x200>, + <0 0x088e9800 0 0x200>, + <0 0x088e9a00 0 0x100>; + #phy-cells = <0>; + #clock-cells = <1>; + clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "usb3_phy_pipe_clk_src"; + }; + }; + + usb_2_qmpphy: phy-wrapper@88eb000 { + compatible = "qcom,sm8350-qmp-usb3-uni-phy"; + reg = <0 0x088eb000 0 0x200>; + status = "disabled"; + #clock-cells = <1>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_USB3_SEC_CLKREF_EN>, + <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>; + clock-names = "aux", "ref_clk_src", "ref", "com_aux"; + + resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>, + <&gcc GCC_USB3_PHY_SEC_BCR>; + reset-names = "phy", "common"; + + usb_2_ssphy: phy@88ebe00 { + reg = <0 0x088ebe00 0 0x200>, + <0 0x088ec000 0 0x200>, + <0 0x088eb200 0 0x1100>; + #phy-cells = <0>; + #clock-cells = <1>; + clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "usb3_uni_phy_pipe_clk_src"; + }; + }; + + dc_noc: interconnect@90e0000 { + compatible = "qcom,sm8350-dc-noc"; + reg = <0 0x090c0000 0 0x4200>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + gem_noc: interconnect@9100000 { + compatible = "qcom,sm8350-gem-noc"; + reg = <0 0x09100000 0 0xb4000>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + usb_1: usb@a6f8800 { + compatible = "qcom,sm8350-dwc3", "qcom,dwc3"; + reg = <0 0x0a6f8800 0 0x400>; + status = "disabled"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_SLEEP_CLK>; + clock-names = "cfg_noc", "core", "iface", "mock_utmi", + "sleep"; + + assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>; + assigned-clock-rates = <19200000>, <200000000>; + + interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 14 IRQ_TYPE_EDGE_BOTH>, + <&pdc 15 IRQ_TYPE_EDGE_BOTH>, + <&pdc 17 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hs_phy_irq", "dp_hs_phy_irq", + "dm_hs_phy_irq", "ss_phy_irq"; + + power-domains = <&gcc USB30_PRIM_GDSC>; + + resets = <&gcc GCC_USB30_PRIM_BCR>; + + usb_1_dwc3: dwc3@a600000 { + compatible = "snps,dwc3"; + reg = <0 0x0a600000 0 0xcd00>; + interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&apps_smmu 0x0 0x0>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + phys = <&usb_1_hsphy>, <&usb_1_ssphy>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; + + usb_2: usb@a8f8800 { + compatible = "qcom,sm8350-dwc3", "qcom,dwc3"; + reg = <0 0x0a8f8800 0 0x400>; + status = "disabled"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>, + <&gcc GCC_USB30_SEC_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>, + <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_SEC_SLEEP_CLK>, + <&gcc GCC_USB3_SEC_CLKREF_EN>; + clock-names = "cfg_noc", "core", "iface", "mock_utmi", + "sleep", "xo"; + + assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_SEC_MASTER_CLK>; + assigned-clock-rates = <19200000>, <200000000>; + + interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 12 IRQ_TYPE_EDGE_BOTH>, + <&pdc 13 IRQ_TYPE_EDGE_BOTH>, + <&pdc 16 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hs_phy_irq", "dp_hs_phy_irq", + "dm_hs_phy_irq", "ss_phy_irq"; + + power-domains = <&gcc USB30_SEC_GDSC>; + + resets = <&gcc GCC_USB30_SEC_BCR>; + + usb_2_dwc3: dwc3@a800000 { + compatible = "snps,dwc3"; + reg = <0 0x0a800000 0 0xcd00>; + interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&apps_smmu 0x20 0x0>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + phys = <&usb_2_hsphy>, <&usb_2_ssphy>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; + + adsp: remoteproc@17300000 { + compatible = "qcom,sm8350-adsp-pas"; + reg = <0 0x17300000 0 0x100>; + + interrupts-extended = <&pdc 6 IRQ_TYPE_LEVEL_HIGH>, + <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&aoss_qmp AOSS_QMP_LS_LPASS>, + <&rpmhpd 4>, + <&rpmhpd 5>; + power-domain-names = "load_state", "lcx", "lmx"; + + memory-region = <&pil_adsp_mem>; + + qcom,smem-states = <&smp2p_adsp_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "lpass"; + qcom,remote-pid = <2>; + }; + }; + }; + + thermal-zones { + cpu0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 1>; + + trips { + cpu0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu0_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu0_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu0_alert0>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu0_alert1>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 2>; + + trips { + cpu1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu1_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu1_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu1_alert0>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu1_alert1>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu2-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 3>; + + trips { + cpu2_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu2_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu2_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu2_alert0>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu2_alert1>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu3-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 4>; + + trips { + cpu3_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu3_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu3_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu3_alert0>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu3_alert1>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu4-top-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 7>; + + trips { + cpu4_top_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4_top_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4_top_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu4_top_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu4_top_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu5-top-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 8>; + + trips { + cpu5_top_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5_top_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5_top_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu5_top_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu5_top_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu6-top-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 9>; + + trips { + cpu6_top_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6_top_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6_top_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu6_top_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu6_top_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu7-top-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 10>; + + trips { + cpu7_top_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_top_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_top_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu7_top_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu7_top_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu4-bottom-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 11>; + + trips { + cpu4_bottom_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4_bottom_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4_bottom_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu4_bottom_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu4_bottom_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu5-bottom-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 12>; + + trips { + cpu5_bottom_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5_bottom_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5_bottom_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu5_bottom_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu5_bottom_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu6-bottom-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 13>; + + trips { + cpu6_bottom_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6_bottom_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6_bottom_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu6_bottom_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu6_bottom_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu7-bottom-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 14>; + + trips { + cpu7_bottom_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_bottom_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_bottom_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu7_bottom_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu7_bottom_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + aoss0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 0>; + + trips { + aoss0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + cluster0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 5>; + + trips { + cluster0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + cluster0_crit: cluster0_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cluster1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 6>; + + trips { + cluster1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + cluster1_crit: cluster1_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + aoss1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 0>; + + trips { + aoss1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + gpu-thermal-top { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 1>; + + trips { + gpu1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <1000>; + type = "hot"; + }; + }; + }; + + gpu-thermal-bottom { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 2>; + + trips { + gpu2_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <1000>; + type = "hot"; + }; + }; + }; + + nspss1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 3>; + + trips { + nspss1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <1000>; + type = "hot"; + }; + }; + }; + + nspss2-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 4>; + + trips { + nspss2_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <1000>; + type = "hot"; + }; + }; + }; + + nspss3-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 5>; + + trips { + nspss3_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <1000>; + type = "hot"; + }; + }; + }; + + video-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 6>; + + trips { + video_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + mem-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 7>; + + trips { + mem_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + modem1-thermal-top { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 8>; + + trips { + modem1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + modem2-thermal-top { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 9>; + + trips { + modem2_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + modem3-thermal-top { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 10>; + + trips { + modem3_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + modem4-thermal-top { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 11>; + + trips { + modem4_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + camera-thermal-top { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 12>; + + trips { + camera1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + camera-thermal-bottom { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 13>; + + trips { + camera2_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; }; }; diff --git a/dts/src/arm64/renesas/beacon-renesom-baseboard.dtsi b/dts/src/arm64/renesas/beacon-renesom-baseboard.dtsi index 30c169b085..d8046fedf9 100644 --- a/dts/src/arm64/renesas/beacon-renesom-baseboard.dtsi +++ b/dts/src/arm64/renesas/beacon-renesom-baseboard.dtsi @@ -615,7 +615,7 @@ }; &rcar_sound { - pinctrl-0 = <&sound_pins &sound_clk_pins>; + pinctrl-0 = <&sound_pins>, <&sound_clk_pins>; pinctrl-names = "default"; /* Single DAI */ @@ -639,7 +639,7 @@ bitclock-master = <&rsnd_endpoint0>; frame-master = <&rsnd_endpoint0>; - playback = <&ssi1 &dvc1 &src1>; + playback = <&ssi1>, <&dvc1>, <&src1>; capture = <&ssi0>; }; }; diff --git a/dts/src/arm64/renesas/hihope-common.dtsi b/dts/src/arm64/renesas/hihope-common.dtsi index 7a3da9b06f..0c7e6f7905 100644 --- a/dts/src/arm64/renesas/hihope-common.dtsi +++ b/dts/src/arm64/renesas/hihope-common.dtsi @@ -12,6 +12,9 @@ aliases { serial0 = &scif2; serial1 = &hscif0; + mmc0 = &sdhi3; + mmc1 = &sdhi0; + mmc2 = &sdhi2; }; chosen { diff --git a/dts/src/arm64/renesas/hihope-rev4.dtsi b/dts/src/arm64/renesas/hihope-rev4.dtsi index 929f4a1d3f..7fc0339a3a 100644 --- a/dts/src/arm64/renesas/hihope-rev4.dtsi +++ b/dts/src/arm64/renesas/hihope-rev4.dtsi @@ -80,7 +80,7 @@ }; &rcar_sound { - pinctrl-0 = <&sound_pins &sound_clk_pins>; + pinctrl-0 = <&sound_pins>, <&sound_clk_pins>; pinctrl-names = "default"; status = "okay"; diff --git a/dts/src/arm64/renesas/r8a774a1-beacon-rzg2m-kit.dts b/dts/src/arm64/renesas/r8a774a1-beacon-rzg2m-kit.dts index 501cb05da2..3cf2e07694 100644 --- a/dts/src/arm64/renesas/r8a774a1-beacon-rzg2m-kit.dts +++ b/dts/src/arm64/renesas/r8a774a1-beacon-rzg2m-kit.dts @@ -21,6 +21,9 @@ serial4 = &hscif2; serial5 = &scif5; ethernet0 = &avb; + mmc0 = &sdhi3; + mmc1 = &sdhi0; + mmc2 = &sdhi2; }; chosen { diff --git a/dts/src/arm64/renesas/r8a774b1-beacon-rzg2n-kit.dts b/dts/src/arm64/renesas/r8a774b1-beacon-rzg2n-kit.dts index 71763f4402..3c0d59def8 100644 --- a/dts/src/arm64/renesas/r8a774b1-beacon-rzg2n-kit.dts +++ b/dts/src/arm64/renesas/r8a774b1-beacon-rzg2n-kit.dts @@ -22,6 +22,9 @@ serial5 = &scif5; serial6 = &scif4; ethernet0 = &avb; + mmc0 = &sdhi3; + mmc1 = &sdhi0; + mmc2 = &sdhi2; }; chosen { diff --git a/dts/src/arm64/renesas/r8a774c0-cat874.dts b/dts/src/arm64/renesas/r8a774c0-cat874.dts index ea87cb5a45..4e72e4f2ba 100644 --- a/dts/src/arm64/renesas/r8a774c0-cat874.dts +++ b/dts/src/arm64/renesas/r8a774c0-cat874.dts @@ -17,6 +17,8 @@ aliases { serial0 = &scif2; serial1 = &hscif2; + mmc0 = &sdhi0; + mmc1 = &sdhi3; }; chosen { @@ -351,7 +353,7 @@ }; &rcar_sound { - pinctrl-0 = <&sound_pins &sound_clk_pins>; + pinctrl-0 = <&sound_pins>, <&sound_clk_pins>; pinctrl-names = "default"; /* Single DAI */ @@ -365,7 +367,7 @@ rcar_sound,dai { dai0 { - playback = <&ssi0 &src0 &dvc0>; + playback = <&ssi0>, <&src0>, <&dvc0>; }; }; }; diff --git a/dts/src/arm64/renesas/r8a774e1-beacon-rzg2h-kit.dts b/dts/src/arm64/renesas/r8a774e1-beacon-rzg2h-kit.dts index 273f062f29..7b6649a3de 100644 --- a/dts/src/arm64/renesas/r8a774e1-beacon-rzg2h-kit.dts +++ b/dts/src/arm64/renesas/r8a774e1-beacon-rzg2h-kit.dts @@ -22,6 +22,9 @@ serial5 = &scif5; serial6 = &scif4; ethernet0 = &avb; + mmc0 = &sdhi3; + mmc1 = &sdhi0; + mmc2 = &sdhi2; }; chosen { diff --git a/dts/src/arm64/renesas/r8a77950-salvator-x.dts b/dts/src/arm64/renesas/r8a77950-salvator-x.dts index 2438825c9b..3e3b954a4a 100644 --- a/dts/src/arm64/renesas/r8a77950-salvator-x.dts +++ b/dts/src/arm64/renesas/r8a77950-salvator-x.dts @@ -52,29 +52,6 @@ status = "okay"; }; -&hdmi0 { - status = "okay"; - - ports { - port@1 { - reg = <1>; - rcar_dw_hdmi0_out: endpoint { - remote-endpoint = <&hdmi0_con>; - }; - }; - port@2 { - reg = <2>; - dw_hdmi0_snd_in: endpoint { - remote-endpoint = <&rsnd_endpoint1>; - }; - }; - }; -}; - -&hdmi0_con { - remote-endpoint = <&rcar_dw_hdmi0_out>; -}; - &hdmi1 { status = "okay"; @@ -111,19 +88,7 @@ &rcar_sound { ports { - /* rsnd_port0 is on salvator-common */ - rsnd_port1: port@1 { - reg = <1>; - rsnd_endpoint1: endpoint { - remote-endpoint = <&dw_hdmi0_snd_in>; - - dai-format = "i2s"; - bitclock-master = <&rsnd_endpoint1>; - frame-master = <&rsnd_endpoint1>; - - playback = <&ssi2>; - }; - }; + /* rsnd_port0/1 are described in salvator-common.dtsi */ rsnd_port2: port@2 { reg = <2>; rsnd_endpoint2: endpoint { diff --git a/dts/src/arm64/renesas/r8a77950.dtsi b/dts/src/arm64/renesas/r8a77950.dtsi index d716c4386a..25b87da32e 100644 --- a/dts/src/arm64/renesas/r8a77950.dtsi +++ b/dts/src/arm64/renesas/r8a77950.dtsi @@ -29,6 +29,11 @@ <&ipmmu_mp1 30>, <&ipmmu_mp1 31>; }; +&cluster0_opp { + /delete-node/ opp-1600000000; + /delete-node/ opp-1700000000; +}; + &du { renesas,vsps = <&vspd0 0>, <&vspd1 0>, <&vspd2 0>, <&vspd3 0>; }; diff --git a/dts/src/arm64/renesas/r8a77951-salvator-x.dts b/dts/src/arm64/renesas/r8a77951-salvator-x.dts index a402a2fb6e..cf2165bdf6 100644 --- a/dts/src/arm64/renesas/r8a77951-salvator-x.dts +++ b/dts/src/arm64/renesas/r8a77951-salvator-x.dts @@ -52,29 +52,6 @@ status = "okay"; }; -&hdmi0 { - status = "okay"; - - ports { - port@1 { - reg = <1>; - rcar_dw_hdmi0_out: endpoint { - remote-endpoint = <&hdmi0_con>; - }; - }; - port@2 { - reg = <2>; - dw_hdmi0_snd_in: endpoint { - remote-endpoint = <&rsnd_endpoint1>; - }; - }; - }; -}; - -&hdmi0_con { - remote-endpoint = <&rcar_dw_hdmi0_out>; -}; - &hdmi1 { status = "okay"; @@ -111,19 +88,7 @@ &rcar_sound { ports { - /* rsnd_port0 is on salvator-common */ - rsnd_port1: port@1 { - reg = <1>; - rsnd_endpoint1: endpoint { - remote-endpoint = <&dw_hdmi0_snd_in>; - - dai-format = "i2s"; - bitclock-master = <&rsnd_endpoint1>; - frame-master = <&rsnd_endpoint1>; - - playback = <&ssi2>; - }; - }; + /* rsnd_port0/1 are described in salvator-common.dtsi */ rsnd_port2: port@2 { reg = <2>; rsnd_endpoint2: endpoint { diff --git a/dts/src/arm64/renesas/r8a77951-salvator-xs.dts b/dts/src/arm64/renesas/r8a77951-salvator-xs.dts index e5922329a4..37202fcdc3 100644 --- a/dts/src/arm64/renesas/r8a77951-salvator-xs.dts +++ b/dts/src/arm64/renesas/r8a77951-salvator-xs.dts @@ -57,29 +57,6 @@ status = "okay"; }; -&hdmi0 { - status = "okay"; - - ports { - port@1 { - reg = <1>; - rcar_dw_hdmi0_out: endpoint { - remote-endpoint = <&hdmi0_con>; - }; - }; - port@2 { - reg = <2>; - dw_hdmi0_snd_in: endpoint { - remote-endpoint = <&rsnd_endpoint1>; - }; - }; - }; -}; - -&hdmi0_con { - remote-endpoint = <&rcar_dw_hdmi0_out>; -}; - &hdmi1 { status = "okay"; @@ -152,19 +129,7 @@ &rcar_sound { ports { - /* rsnd_port0 is on salvator-common */ - rsnd_port1: port@1 { - reg = <1>; - rsnd_endpoint1: endpoint { - remote-endpoint = <&dw_hdmi0_snd_in>; - - dai-format = "i2s"; - bitclock-master = <&rsnd_endpoint1>; - frame-master = <&rsnd_endpoint1>; - - playback = <&ssi2>; - }; - }; + /* rsnd_port0/1 are described in salvator-common.dtsi */ rsnd_port2: port@2 { reg = <2>; rsnd_endpoint2: endpoint { diff --git a/dts/src/arm64/renesas/r8a77960-salvator-x.dts b/dts/src/arm64/renesas/r8a77960-salvator-x.dts index ecfbeafeaf..d5543f26c4 100644 --- a/dts/src/arm64/renesas/r8a77960-salvator-x.dts +++ b/dts/src/arm64/renesas/r8a77960-salvator-x.dts @@ -35,49 +35,3 @@ clock-names = "du.0", "du.1", "du.2", "dclkin.0", "dclkin.1", "dclkin.2"; |