dts: update to v5.5-rc3

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

9 files changed, 30 insertions, 21 deletions

diff --git a/dts/src/arm/am335x-sancloud-bbe.dts b/dts/src/arm/am335x-sancloud-bbe.dts
index 8678e6e354..e5fdb7abb0 100644
--- a/dts/src/arm/am335x-sancloud-bbe.dts
+++ b/dts/src/arm/am335x-sancloud-bbe.dts
@@ -108,7 +108,7 @@
 
 &cpsw_emac0 {
 	phy-handle = <&ethphy0>;
-	phy-mode = "rgmii-txid";
+	phy-mode = "rgmii-id";
 };
 
 &i2c0 {
diff --git a/dts/src/arm/am437x-gp-evm.dts b/dts/src/arm/am437x-gp-evm.dts
index cae4500194..811c8cae31 100644
--- a/dts/src/arm/am437x-gp-evm.dts
+++ b/dts/src/arm/am437x-gp-evm.dts
@@ -86,7 +86,7 @@
 		};
 
 	lcd0: display {
-		compatible = "osddisplays,osd057T0559-34ts", "panel-dpi";
+		compatible = "osddisplays,osd070t1718-19ts", "panel-dpi";
 		label = "lcd";
 
 		backlight = <&lcd_bl>;
diff --git a/dts/src/arm/am43x-epos-evm.dts b/dts/src/arm/am43x-epos-evm.dts
index 95314121d1..078cb473fa 100644
--- a/dts/src/arm/am43x-epos-evm.dts
+++ b/dts/src/arm/am43x-epos-evm.dts
@@ -42,7 +42,7 @@
 	};
 
 	lcd0: display {
-		compatible = "osddisplays,osd057T0559-34ts", "panel-dpi";
+		compatible = "osddisplays,osd070t1718-19ts", "panel-dpi";
 		label = "lcd";
 
 		backlight = <&lcd_bl>;
diff --git a/dts/src/arm/bcm-cygnus.dtsi b/dts/src/arm/bcm-cygnus.dtsi
index 2dac3efc76..1bc45cfd54 100644
--- a/dts/src/arm/bcm-cygnus.dtsi
+++ b/dts/src/arm/bcm-cygnus.dtsi
@@ -174,8 +174,8 @@
 		mdio: mdio@18002000 {
 			compatible = "brcm,iproc-mdio";
 			reg = <0x18002000 0x8>;
-			#size-cells = <1>;
-			#address-cells = <0>;
+			#size-cells = <0>;
+			#address-cells = <1>;
 			status = "disabled";
 
 			gphy0: ethernet-phy@0 {
diff --git a/dts/src/arm/bcm2711.dtsi b/dts/src/arm/bcm2711.dtsi
index 961bed8327..e2f6ffb00a 100644
--- a/dts/src/arm/bcm2711.dtsi
+++ b/dts/src/arm/bcm2711.dtsi
@@ -43,7 +43,7 @@
 			 <0x7c000000  0x0 0xfc000000  0x02000000>,
 			 <0x40000000  0x0 0xff800000  0x00800000>;
 		/* Emulate a contiguous 30-bit address range for DMA */
-		dma-ranges = <0xc0000000  0x0 0x00000000  0x3c000000>;
+		dma-ranges = <0xc0000000  0x0 0x00000000  0x40000000>;
 
 		/*
 		 * This node is the provider for the enable-method for
diff --git a/dts/src/arm/bcm283x.dtsi b/dts/src/arm/bcm283x.dtsi
index 3caaa57eb6..839491628e 100644
--- a/dts/src/arm/bcm283x.dtsi
+++ b/dts/src/arm/bcm283x.dtsi
@@ -37,7 +37,7 @@
 
 			trips {
 				cpu-crit {
-					temperature	= <80000>;
+					temperature	= <90000>;
 					hysteresis	= <0>;
 					type		= "critical";
 				};
diff --git a/dts/src/arm/bcm5301x.dtsi b/dts/src/arm/bcm5301x.dtsi
index 372dc1eb88..2d9b4dd058 100644
--- a/dts/src/arm/bcm5301x.dtsi
+++ b/dts/src/arm/bcm5301x.dtsi
@@ -353,8 +353,8 @@
 	mdio: mdio@18003000 {
 		compatible = "brcm,iproc-mdio";
 		reg = <0x18003000 0x8>;
-		#size-cells = <1>;
-		#address-cells = <0>;
+		#size-cells = <0>;
+		#address-cells = <1>;
 	};
 
 	mdio-bus-mux@18003000 {
diff --git a/dts/src/arm/e60k02.dtsi b/dts/src/arm/e60k02.dtsi
index 6472b056a0..5a2c532043 100644
--- a/dts/src/arm/e60k02.dtsi
+++ b/dts/src/arm/e60k02.dtsi
@@ -265,11 +265,6 @@
 				regulator-name = "LDORTC1";
 				regulator-boot-on;
 			};
-
-			ldortc2_reg: LDORTC2 {
-				regulator-name = "LDORTC2";
-				regulator-boot-on;
-			};
 		};
 	};
 };
diff --git a/dts/src/arm/imx6ul-14x14-evk.dtsi b/dts/src/arm/imx6ul-14x14-evk.dtsi
index 1506eb12b2..212144511b 100644
--- a/dts/src/arm/imx6ul-14x14-evk.dtsi
+++ b/dts/src/arm/imx6ul-14x14-evk.dtsi
@@ -30,14 +30,26 @@
 		enable-active-high;
 	};
 
-	reg_sensors: regulator-sensors {
+	reg_peri_3v3: regulator-peri-3v3 {
 		compatible = "regulator-fixed";
 		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_sensors_reg>;
-		regulator-name = "sensors-supply";
+		pinctrl-0 = <&pinctrl_peri_3v3>;
+		regulator-name = "VPERI_3V3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 		gpio = <&gpio5 2 GPIO_ACTIVE_LOW>;
+		/*
+		 * If you want to want to make this dynamic please
+		 * check schematics and test all affected peripherals:
+		 *
+		 * - sensors
+		 * - ethernet phy
+		 * - can
+		 * - bluetooth
+		 * - wm8960 audio codec
+		 * - ov5640 camera
+		 */
+		regulator-always-on;
 	};
 
 	reg_can_3v3: regulator-can-3v3 {
@@ -140,6 +152,7 @@
 	pinctrl-0 = <&pinctrl_enet1>;
 	phy-mode = "rmii";
 	phy-handle = <&ethphy0>;
+	phy-supply = <&reg_peri_3v3>;
 	status = "okay";
 };
 
@@ -148,6 +161,7 @@
 	pinctrl-0 = <&pinctrl_enet2>;
 	phy-mode = "rmii";
 	phy-handle = <&ethphy1>;
+	phy-supply = <&reg_peri_3v3>;
 	status = "okay";
 
 	mdio {
@@ -193,8 +207,8 @@
 	magnetometer@e {
 		compatible = "fsl,mag3110";
 		reg = <0x0e>;
-		vdd-supply = <&reg_sensors>;
-		vddio-supply = <&reg_sensors>;
+		vdd-supply = <&reg_peri_3v3>;
+		vddio-supply = <&reg_peri_3v3>;
 	};
 };
 
@@ -227,7 +241,7 @@
 	flash0: n25q256a@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "micron,n25q256a";
+		compatible = "micron,n25q256a", "jedec,spi-nor";
 		spi-max-frequency = <29000000>;
 		spi-rx-bus-width = <4>;
 		spi-tx-bus-width = <4>;
@@ -462,7 +476,7 @@
 		>;
 	};
 
-	pinctrl_sensors_reg: sensorsreggrp {
+	pinctrl_peri_3v3: peri3v3grp {
 		fsl,pins = <
 			MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02	0x1b0b0
 		>;