dts: update to v5.19-rc4

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

11 files changed, 59 insertions, 97 deletions

diff --git a/dts/src/arm/aspeed-bmc-nuvia-dc-scm.dts b/dts/src/arm/aspeed-bmc-qcom-dc-scm-v1.dts
index f4a97cfb0f..259ef3f54c 100644
--- a/dts/src/arm/aspeed-bmc-nuvia-dc-scm.dts
+++ b/dts/src/arm/aspeed-bmc-qcom-dc-scm-v1.dts
@@ -6,8 +6,8 @@
 #include "aspeed-g6.dtsi"
 
 / {
-	model = "Nuvia DC-SCM BMC";
-	compatible = "nuvia,dc-scm-bmc", "aspeed,ast2600";
+	model = "Qualcomm DC-SCM V1 BMC";
+	compatible = "qcom,dc-scm-v1-bmc", "aspeed,ast2600";
 
 	aliases {
 		serial4 = &uart5;
diff --git a/dts/src/arm/bcm2711-rpi-400.dts b/dts/src/arm/bcm2711-rpi-400.dts
index f4d2fc2039..c53d9eb0b8 100644
--- a/dts/src/arm/bcm2711-rpi-400.dts
+++ b/dts/src/arm/bcm2711-rpi-400.dts
@@ -28,12 +28,12 @@
 &expgpio {
 	gpio-line-names = "BT_ON",
 			  "WL_ON",
-			  "",
+			  "PWR_LED_OFF",
 			  "GLOBAL_RESET",
 			  "VDD_SD_IO_SEL",
-			  "CAM_GPIO",
+			  "GLOBAL_SHUTDOWN",
 			  "SD_PWR_ON",
-			  "SD_OC_N";
+			  "SHUTDOWN_REQUEST";
 };
 
 &genet_mdio {
diff --git a/dts/src/arm/imx6qdl-colibri.dtsi b/dts/src/arm/imx6qdl-colibri.dtsi
index c383e0e411..7df270cea2 100644
--- a/dts/src/arm/imx6qdl-colibri.dtsi
+++ b/dts/src/arm/imx6qdl-colibri.dtsi
@@ -593,7 +593,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_atmel_conn>;
 		reg = <0x4a>;
-		reset-gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;	/* SODIMM 106 */
+		reset-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;	/* SODIMM 106 */
 		status = "disabled";
 	};
 };
diff --git a/dts/src/arm/imx6qdl.dtsi b/dts/src/arm/imx6qdl.dtsi
index d27beb47f9..652feff334 100644
--- a/dts/src/arm/imx6qdl.dtsi
+++ b/dts/src/arm/imx6qdl.dtsi
@@ -762,7 +762,7 @@
 					regulator-name = "vddpu";
 					regulator-min-microvolt = <725000>;
 					regulator-max-microvolt = <1450000>;
-					regulator-enable-ramp-delay = <150>;
+					regulator-enable-ramp-delay = <380>;
 					anatop-reg-offset = <0x140>;
 					anatop-vol-bit-shift = <9>;
 					anatop-vol-bit-width = <5>;
diff --git a/dts/src/arm/imx7s.dtsi b/dts/src/arm/imx7s.dtsi
index 008e3da460..039eed79d2 100644
--- a/dts/src/arm/imx7s.dtsi
+++ b/dts/src/arm/imx7s.dtsi
@@ -120,6 +120,7 @@
 		compatible = "usb-nop-xceiv";
 		clocks = <&clks IMX7D_USB_HSIC_ROOT_CLK>;
 		clock-names = "main_clk";
+		power-domains = <&pgc_hsic_phy>;
 		#phy-cells = <0>;
 	};
 
@@ -1153,7 +1154,6 @@
 				compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
 				reg = <0x30b30000 0x200>;
 				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
-				power-domains = <&pgc_hsic_phy>;
 				clocks = <&clks IMX7D_USB_CTRL_CLK>;
 				fsl,usbphy = <&usbphynop3>;
 				fsl,usbmisc = <&usbmisc3 0>;
diff --git a/dts/src/arm/stm32mp15-scmi.dtsi b/dts/src/arm/stm32mp15-scmi.dtsi
new file mode 100644
index 0000000000..e90cf3acd0
--- /dev/null
+++ b/dts/src/arm/stm32mp15-scmi.dtsi
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2022 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
+ */
+
+/ {
+	firmware {
+		optee: optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+
+		scmi: scmi {
+			compatible = "linaro,scmi-optee";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			linaro,optee-channel-id = <0>;
+			shmem = <&scmi_shm>;
+
+			scmi_clk: protocol@14 {
+				reg = <0x14>;
+				#clock-cells = <1>;
+			};
+
+			scmi_reset: protocol@16 {
+				reg = <0x16>;
+				#reset-cells = <1>;
+			};
+		};
+	};
+
+	soc {
+		scmi_sram: sram@2ffff000 {
+			compatible = "mmio-sram";
+			reg = <0x2ffff000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x2ffff000 0x1000>;
+
+			scmi_shm: scmi-sram@0 {
+				compatible = "arm,scmi-shmem";
+				reg = <0 0x80>;
+			};
+		};
+	};
+};
diff --git a/dts/src/arm/stm32mp151.dtsi b/dts/src/arm/stm32mp151.dtsi
index 1b2fd3426a..7fdc324b3c 100644
--- a/dts/src/arm/stm32mp151.dtsi
+++ b/dts/src/arm/stm32mp151.dtsi
@@ -115,33 +115,6 @@
 		status = "disabled";
 	};
 
-	firmware {
-		optee: optee {
-			compatible = "linaro,optee-tz";
-			method = "smc";
-			status = "disabled";
-		};
-
-		scmi: scmi {
-			compatible = "linaro,scmi-optee";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			linaro,optee-channel-id = <0>;
-			shmem = <&scmi_shm>;
-			status = "disabled";
-
-			scmi_clk: protocol@14 {
-				reg = <0x14>;
-				#clock-cells = <1>;
-			};
-
-			scmi_reset: protocol@16 {
-				reg = <0x16>;
-				#reset-cells = <1>;
-			};
-		};
-	};
-
 	soc {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -149,20 +122,6 @@
 		interrupt-parent = <&intc>;
 		ranges;
 
-		scmi_sram: sram@2ffff000 {
-			compatible = "mmio-sram";
-			reg = <0x2ffff000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x2ffff000 0x1000>;
-
-			scmi_shm: scmi-sram@0 {
-				compatible = "arm,scmi-shmem";
-				reg = <0 0x80>;
-				status = "disabled";
-			};
-		};
-
 		timers2: timer@40000000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
diff --git a/dts/src/arm/stm32mp157a-dk1-scmi.dts b/dts/src/arm/stm32mp157a-dk1-scmi.dts
index e3d3f3f30c..36371d6ed6 100644
--- a/dts/src/arm/stm32mp157a-dk1-scmi.dts
+++ b/dts/src/arm/stm32mp157a-dk1-scmi.dts
@@ -7,6 +7,7 @@
 /dts-v1/;
 
 #include "stm32mp157a-dk1.dts"
+#include "stm32mp15-scmi.dtsi"
 
 / {
 	model = "STMicroelectronics STM32MP157A-DK1 SCMI Discovery Board";
@@ -54,10 +55,6 @@
 	resets = <&scmi_reset RST_SCMI_MCU>;
 };
 
-&optee {
-	status = "okay";
-};
-
 &rcc {
 	compatible = "st,stm32mp1-rcc-secure", "syscon";
 	clock-names = "hse", "hsi", "csi", "lse", "lsi";
@@ -76,11 +73,3 @@
 &rtc {
 	clocks = <&scmi_clk CK_SCMI_RTCAPB>, <&scmi_clk CK_SCMI_RTC>;
 };
-
-&scmi {
-	status = "okay";
-};
-
-&scmi_shm {
-	status = "okay";
-};
diff --git a/dts/src/arm/stm32mp157c-dk2-scmi.dts b/dts/src/arm/stm32mp157c-dk2-scmi.dts
index 45dcd299aa..03226a5969 100644
--- a/dts/src/arm/stm32mp157c-dk2-scmi.dts
+++ b/dts/src/arm/stm32mp157c-dk2-scmi.dts
@@ -7,6 +7,7 @@
 /dts-v1/;
 
 #include "stm32mp157c-dk2.dts"
+#include "stm32mp15-scmi.dtsi"
 
 / {
 	model = "STMicroelectronics STM32MP157C-DK2 SCMI Discovery Board";
@@ -63,10 +64,6 @@
 	resets = <&scmi_reset RST_SCMI_MCU>;
 };
 
-&optee {
-	status = "okay";
-};
-
 &rcc {
 	compatible = "st,stm32mp1-rcc-secure", "syscon";
 	clock-names = "hse", "hsi", "csi", "lse", "lsi";
@@ -85,11 +82,3 @@
 &rtc {
 	clocks = <&scmi_clk CK_SCMI_RTCAPB>, <&scmi_clk CK_SCMI_RTC>;
 };
-
-&scmi {
-	status = "okay";
-};
-
-&scmi_shm {
-	status = "okay";
-};
diff --git a/dts/src/arm/stm32mp157c-ed1-scmi.dts b/dts/src/arm/stm32mp157c-ed1-scmi.dts
index 458e0ca3cd..c1a79272c0 100644
--- a/dts/src/arm/stm32mp157c-ed1-scmi.dts
+++ b/dts/src/arm/stm32mp157c-ed1-scmi.dts
@@ -7,6 +7,7 @@
 /dts-v1/;
 
 #include "stm32mp157c-ed1.dts"
+#include "stm32mp15-scmi.dtsi"
 
 / {
 	model = "STMicroelectronics STM32MP157C-ED1 SCMI eval daughter";
@@ -59,10 +60,6 @@
 	resets = <&scmi_reset RST_SCMI_MCU>;
 };
 
-&optee {
-	status = "okay";
-};
-
 &rcc {
 	compatible = "st,stm32mp1-rcc-secure", "syscon";
 	clock-names = "hse", "hsi", "csi", "lse", "lsi";
@@ -81,11 +78,3 @@
 &rtc {
 	clocks = <&scmi_clk CK_SCMI_RTCAPB>, <&scmi_clk CK_SCMI_RTC>;
 };
-
-&scmi {
-	status = "okay";
-};
-
-&scmi_shm {
-	status = "okay";
-};
diff --git a/dts/src/arm/stm32mp157c-ev1-scmi.dts b/dts/src/arm/stm32mp157c-ev1-scmi.dts
index df9c113edb..7842384ddb 100644
--- a/dts/src/arm/stm32mp157c-ev1-scmi.dts
+++ b/dts/src/arm/stm32mp157c-ev1-scmi.dts
@@ -7,6 +7,7 @@
 /dts-v1/;
 
 #include "stm32mp157c-ev1.dts"
+#include "stm32mp15-scmi.dtsi"
 
 / {
 	model = "STMicroelectronics STM32MP157C-EV1 SCMI eval daughter on eval mother";
@@ -68,10 +69,6 @@
 	resets = <&scmi_reset RST_SCMI_MCU>;
 };
 
-&optee {
-	status = "okay";
-};
-
 &rcc {
 	compatible = "st,stm32mp1-rcc-secure", "syscon";
 	clock-names = "hse", "hsi", "csi", "lse", "lsi";
@@ -90,11 +87,3 @@
 &rtc {
 	clocks = <&scmi_clk CK_SCMI_RTCAPB>, <&scmi_clk CK_SCMI_RTC>;
 };
-
-&scmi {
-	status = "okay";
-};
-
-&scmi_shm {
-	status = "okay";
-};