dts: update to v4.15-rc3

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

42 files changed, 71 insertions, 43 deletions

diff --git a/dts/src/arm/am33xx.dtsi b/dts/src/arm/am33xx.dtsi
index 1b81c4e757..d37f950258 100644
--- a/dts/src/arm/am33xx.dtsi
+++ b/dts/src/arm/am33xx.dtsi
@@ -630,6 +630,7 @@
 				reg-names = "phy";
 				status = "disabled";
 				ti,ctrl_mod = <&usb_ctrl_mod>;
+				#phy-cells = <0>;
 			};
 
 			usb0: usb@47401000 {
@@ -678,6 +679,7 @@
 				reg-names = "phy";
 				status = "disabled";
 				ti,ctrl_mod = <&usb_ctrl_mod>;
+				#phy-cells = <0>;
 			};
 
 			usb1: usb@47401800 {
diff --git a/dts/src/arm/am4372.dtsi b/dts/src/arm/am4372.dtsi
index e5b061469b..4714a59fd8 100644
--- a/dts/src/arm/am4372.dtsi
+++ b/dts/src/arm/am4372.dtsi
@@ -927,7 +927,8 @@
 			reg = <0x48038000 0x2000>,
 			      <0x46000000 0x400000>;
 			reg-names = "mpu", "dat";
-			interrupts = <80>, <81>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "tx", "rx";
 			status = "disabled";
 			dmas = <&edma 8 2>,
@@ -941,7 +942,8 @@
 			reg = <0x4803C000 0x2000>,
 			      <0x46400000 0x400000>;
 			reg-names = "mpu", "dat";
-			interrupts = <82>, <83>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "tx", "rx";
 			status = "disabled";
 			dmas = <&edma 10 2>,
diff --git a/dts/src/arm/am437x-cm-t43.dts b/dts/src/arm/am437x-cm-t43.dts
index 9e92d48057..3b9a94c274 100644
--- a/dts/src/arm/am437x-cm-t43.dts
+++ b/dts/src/arm/am437x-cm-t43.dts
@@ -301,8 +301,8 @@
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&spi0_pins>;
-	dmas = <&edma 16
-		&edma 17>;
+	dmas = <&edma 16 0
+		&edma 17 0>;
 	dma-names = "tx0", "rx0";
 
 	flash: w25q64cvzpig@0 {
diff --git a/dts/src/arm/armada-385-db-ap.dts b/dts/src/arm/armada-385-db-ap.dts
index 25d2d720dc..678aa02333 100644
--- a/dts/src/arm/armada-385-db-ap.dts
+++ b/dts/src/arm/armada-385-db-ap.dts
@@ -236,6 +236,7 @@
 	usb3_phy: usb3_phy {
 		compatible = "usb-nop-xceiv";
 		vcc-supply = <&reg_xhci0_vbus>;
+		#phy-cells = <0>;
 	};
 
 	reg_xhci0_vbus: xhci0-vbus {
diff --git a/dts/src/arm/armada-385-linksys.dtsi b/dts/src/arm/armada-385-linksys.dtsi
index e1f355ffc8..434dc9aaa5 100644
--- a/dts/src/arm/armada-385-linksys.dtsi
+++ b/dts/src/arm/armada-385-linksys.dtsi
@@ -66,6 +66,7 @@
 	usb3_1_phy: usb3_1-phy {
 		compatible = "usb-nop-xceiv";
 		vcc-supply = <&usb3_1_vbus>;
+		#phy-cells = <0>;
 	};
 
 	usb3_1_vbus: usb3_1-vbus {
diff --git a/dts/src/arm/armada-385-synology-ds116.dts b/dts/src/arm/armada-385-synology-ds116.dts
index 36ad571e76..0a3552ebda 100644
--- a/dts/src/arm/armada-385-synology-ds116.dts
+++ b/dts/src/arm/armada-385-synology-ds116.dts
@@ -191,11 +191,13 @@
 	usb3_0_phy: usb3_0_phy {
 		compatible = "usb-nop-xceiv";
 		vcc-supply = <&reg_usb3_0_vbus>;
+		#phy-cells = <0>;
 	};
 
 	usb3_1_phy: usb3_1_phy {
 		compatible = "usb-nop-xceiv";
 		vcc-supply = <&reg_usb3_1_vbus>;
+		#phy-cells = <0>;
 	};
 
 	reg_usb3_0_vbus: usb3-vbus0 {
diff --git a/dts/src/arm/armada-388-gp.dts b/dts/src/arm/armada-388-gp.dts
index f503955dbd..51b4ee6df1 100644
--- a/dts/src/arm/armada-388-gp.dts
+++ b/dts/src/arm/armada-388-gp.dts
@@ -276,11 +276,13 @@
 	usb2_1_phy: usb2_1_phy {
 		compatible = "usb-nop-xceiv";
 		vcc-supply = <&reg_usb2_1_vbus>;
+		#phy-cells = <0>;
 	};
 
 	usb3_phy: usb3_phy {
 		compatible = "usb-nop-xceiv";
 		vcc-supply = <&reg_usb3_vbus>;
+		#phy-cells = <0>;
 	};
 
 	reg_usb3_vbus: usb3-vbus {
diff --git a/dts/src/arm/bcm-nsp.dtsi b/dts/src/arm/bcm-nsp.dtsi
index 528b9e3bc1..dcc55aa845 100644
--- a/dts/src/arm/bcm-nsp.dtsi
+++ b/dts/src/arm/bcm-nsp.dtsi
@@ -85,7 +85,7 @@
 		timer@20200 {
 			compatible = "arm,cortex-a9-global-timer";
 			reg = <0x20200 0x100>;
-			interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
 			clocks = <&periph_clk>;
 		};
 
@@ -93,7 +93,7 @@
 			compatible = "arm,cortex-a9-twd-timer";
 			reg = <0x20600 0x20>;
 			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
-						  IRQ_TYPE_LEVEL_HIGH)>;
+						  IRQ_TYPE_EDGE_RISING)>;
 			clocks = <&periph_clk>;
 		};
 
diff --git a/dts/src/arm/bcm283x.dtsi b/dts/src/arm/bcm283x.dtsi
index 013431e3d7..dcde93c85c 100644
--- a/dts/src/arm/bcm283x.dtsi
+++ b/dts/src/arm/bcm283x.dtsi
@@ -639,5 +639,6 @@
 
 	usbphy: phy {
 		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
 	};
 };
diff --git a/dts/src/arm/bcm958623hr.dts b/dts/src/arm/bcm958623hr.dts
index 3bc50849d0..b8bde13de9 100644
--- a/dts/src/arm/bcm958623hr.dts
+++ b/dts/src/arm/bcm958623hr.dts
@@ -141,10 +141,6 @@
 	status = "okay";
 };
 
-&sata {
-	status = "okay";
-};
-
 &qspi {
 	bspi-sel = <0>;
 	flash: m25p80@0 {
diff --git a/dts/src/arm/bcm958625hr.dts b/dts/src/arm/bcm958625hr.dts
index d94d14b3c7..6a44b80217 100644
--- a/dts/src/arm/bcm958625hr.dts
+++ b/dts/src/arm/bcm958625hr.dts
@@ -177,10 +177,6 @@
 	status = "okay";
 };
 
-&sata {
-	status = "okay";
-};
-
 &srab {
 	compatible = "brcm,bcm58625-srab", "brcm,nsp-srab";
 	status = "okay";
diff --git a/dts/src/arm/dm814x.dtsi b/dts/src/arm/dm814x.dtsi
index 9708157f5d..681f548740 100644
--- a/dts/src/arm/dm814x.dtsi
+++ b/dts/src/arm/dm814x.dtsi
@@ -75,6 +75,7 @@
 				reg = <0x47401300 0x100>;
 				reg-names = "phy";
 				ti,ctrl_mod = <&usb_ctrl_mod>;
+				#phy-cells = <0>;
 			};
 
 			usb0: usb@47401000 {
@@ -385,6 +386,7 @@
 					reg = <0x1b00 0x100>;
 					reg-names = "phy";
 					ti,ctrl_mod = <&usb_ctrl_mod>;
+					#phy-cells = <0>;
 				};
 			};
 
diff --git a/dts/src/arm/imx53.dtsi b/dts/src/arm/imx53.dtsi
index 589a67c5f7..84f17f7abb 100644
--- a/dts/src/arm/imx53.dtsi
+++ b/dts/src/arm/imx53.dtsi
@@ -433,15 +433,6 @@
 				clock-names = "ipg", "per";
 			};
 
-			srtc: srtc@53fa4000 {
-				compatible = "fsl,imx53-rtc", "fsl,imx25-rtc";
-				reg = <0x53fa4000 0x4000>;
-				interrupts = <24>;
-				interrupt-parent = <&tzic>;
-				clocks = <&clks IMX5_CLK_SRTC_GATE>;
-				clock-names = "ipg";
-			};
-
 			iomuxc: iomuxc@53fa8000 {
 				compatible = "fsl,imx53-iomuxc";
 				reg = <0x53fa8000 0x4000>;
diff --git a/dts/src/arm/logicpd-som-lv-37xx-devkit.dts b/dts/src/arm/logicpd-som-lv-37xx-devkit.dts
index 38faa90007..2fa5eb4bd4 100644
--- a/dts/src/arm/logicpd-som-lv-37xx-devkit.dts
+++ b/dts/src/arm/logicpd-som-lv-37xx-devkit.dts
@@ -72,7 +72,8 @@
 };
 
 &gpmc {
-	ranges = <1 0 0x08000000 0x1000000>;	/* CS1: 16MB for LAN9221 */
+	ranges = <0 0 0x30000000 0x1000000	/* CS0: 16MB for NAND */
+		  1 0 0x2c000000 0x1000000>;	/* CS1: 16MB for LAN9221 */
 
 	ethernet@gpmc {
 		pinctrl-names = "default";
diff --git a/dts/src/arm/logicpd-som-lv.dtsi b/dts/src/arm/logicpd-som-lv.dtsi
index 26cce4d184..29cb804d10 100644
--- a/dts/src/arm/logicpd-som-lv.dtsi
+++ b/dts/src/arm/logicpd-som-lv.dtsi
@@ -33,11 +33,12 @@
 	hsusb2_phy: hsusb2_phy {
 		compatible = "usb-nop-xceiv";
 		reset-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; /* gpio_4 */
+		#phy-cells = <0>;
 	};
 };
 
 &gpmc {
-	ranges = <0 0 0x00000000 0x1000000>;	/* CS0: 16MB for NAND */
+	ranges = <0 0 0x30000000 0x1000000>;	/* CS0: 16MB for NAND */
 
 	nand@0,0 {
 		compatible = "ti,omap2-nand";
@@ -121,7 +122,7 @@
 
 &mmc3 {
 	interrupts-extended = <&intc 94 &omap3_pmx_core2 0x46>;
-	pinctrl-0 = <&mmc3_pins>;
+	pinctrl-0 = <&mmc3_pins &wl127x_gpio>;
 	pinctrl-names = "default";
 	vmmc-supply = <&wl12xx_vmmc>;
 	non-removable;
@@ -132,8 +133,8 @@
 	wlcore: wlcore@2 {
 		compatible = "ti,wl1273";
 		reg = <2>;
-		interrupt-parent = <&gpio5>;
-		interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; /* gpio 152 */
+		interrupt-parent = <&gpio1>;
+		interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; /* gpio 2 */
 		ref-clock-frequency = <26000000>;
 	};
 };
@@ -157,8 +158,6 @@
 			OMAP3_CORE1_IOPAD(0x2166, PIN_INPUT_PULLUP | MUX_MODE3)	/* sdmmc2_dat5.sdmmc3_dat1 */
 			OMAP3_CORE1_IOPAD(0x2168, PIN_INPUT_PULLUP | MUX_MODE3)	/* sdmmc2_dat6.sdmmc3_dat2 */
 			OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE3)	/* sdmmc2_dat6.sdmmc3_dat3 */
-			OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT_PULLUP | MUX_MODE4)	/* mcbsp4_clkx.gpio_152 */
-			OMAP3_CORE1_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE4)	/* sys_boot1.gpio_3 */
 			OMAP3_CORE1_IOPAD(0x21d0, PIN_INPUT_PULLUP | MUX_MODE3) /* mcspi1_cs1.sdmmc3_cmd */
 			OMAP3_CORE1_IOPAD(0x21d2, PIN_INPUT_PULLUP | MUX_MODE3)	/* mcspi1_cs2.sdmmc_clk */
 		>;
@@ -228,6 +227,12 @@
 			OMAP3_WKUP_IOPAD(0x2a0e, PIN_OUTPUT | MUX_MODE4)	/* sys_boot2.gpio_4 */
 		>;
 	};
+	wl127x_gpio: pinmux_wl127x_gpio_pin {
+		pinctrl-single,pins = <
+			OMAP3_WKUP_IOPAD(0x2a0c, PIN_INPUT | MUX_MODE4)		/* sys_boot0.gpio_2 */
+			OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE4)	/* sys_boot1.gpio_3 */
+		>;
+	};
 };
 
 &omap3_pmx_core2 {
diff --git a/dts/src/arm/meson.dtsi b/dts/src/arm/meson.dtsi
index 4926133077..0d9faf1a51 100644
--- a/dts/src/arm/meson.dtsi
+++ b/dts/src/arm/meson.dtsi
@@ -85,15 +85,6 @@
 				reg = <0x7c00 0x200>;
 			};
 
-			gpio_intc: interrupt-controller@9880 {
-				compatible = "amlogic,meson-gpio-intc";
-				reg = <0xc1109880 0x10>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>;
-				status = "disabled";
-			};
-
 			hwrng: rng@8100 {
 				compatible = "amlogic,meson-rng";
 				reg = <0x8100 0x8>;
@@ -191,6 +182,15 @@
 				status = "disabled";
 			};
 
+			gpio_intc: interrupt-controller@9880 {
+				compatible = "amlogic,meson-gpio-intc";
+				reg = <0x9880 0x10>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>;
+				status = "disabled";
+			};
+
 			wdt: watchdog@9900 {
 				compatible = "amlogic,meson6-wdt";
 				reg = <0x9900 0x8>;
diff --git a/dts/src/arm/nspire.dtsi b/dts/src/arm/nspire.dtsi
index ec2283b1a6..1a5ae4cd10 100644
--- a/dts/src/arm/nspire.dtsi
+++ b/dts/src/arm/nspire.dtsi
@@ -56,6 +56,7 @@
 
 	usb_phy: usb_phy {
 		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
 	};
 
 	vbus_reg: vbus_reg {
diff --git a/dts/src/arm/omap3-beagle-xm.dts b/dts/src/arm/omap3-beagle-xm.dts
index 683b96a8f7..0349fcc9dc 100644
--- a/dts/src/arm/omap3-beagle-xm.dts
+++ b/dts/src/arm/omap3-beagle-xm.dts
@@ -90,6 +90,7 @@
 		compatible = "usb-nop-xceiv";
 		reset-gpios = <&gpio5 19 GPIO_ACTIVE_LOW>; /* gpio_147 */
 		vcc-supply = <&hsusb2_power>;
+		#phy-cells = <0>;
 	};
 
 	tfp410: encoder0 {
diff --git a/dts/src/arm/omap3-beagle.dts b/dts/src/arm/omap3-beagle.dts
index 4d2eaf843f..3ca8991a6c 100644
--- a/dts/src/arm/omap3-beagle.dts
+++ b/dts/src/arm/omap3-beagle.dts
@@ -64,6 +64,7 @@
 		compatible = "usb-nop-xceiv";
 		reset-gpios = <&gpio5 19 GPIO_ACTIVE_LOW>;	/* gpio_147 */
 		vcc-supply = <&hsusb2_power>;
+		#phy-cells = <0>;
 	};
 
 	sound {
diff --git a/dts/src/arm/omap3-cm-t3x.dtsi b/dts/src/arm/omap3-cm-t3x.dtsi
index 31d5ebf388..ab6003fe5a 100644
--- a/dts/src/arm/omap3-cm-t3x.dtsi
+++ b/dts/src/arm/omap3-cm-t3x.dtsi
@@ -43,12 +43,14 @@
 	hsusb1_phy: hsusb1_phy {
 		compatible = "usb-nop-xceiv";
 		vcc-supply = <&hsusb1_power>;
+		#phy-cells = <0>;
 	};
 
 	/* HS USB Host PHY on PORT 2 */
 	hsusb2_phy: hsusb2_phy {
 		compatible = "usb-nop-xceiv";
 		vcc-supply = <&hsusb2_power>;
+		#phy-cells = <0>;
 	};
 
 	ads7846reg: ads7846-reg {
diff --git a/dts/src/arm/omap3-evm-common.dtsi b/dts/src/arm/omap3-evm-common.dtsi
index dbc3f030a1..ee64191e41 100644
--- a/dts/src/arm/omap3-evm-common.dtsi
+++ b/dts/src/arm/omap3-evm-common.dtsi
@@ -29,6 +29,7 @@
 		compatible = "usb-nop-xceiv";
 		reset-gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; /* gpio_21 */
 		vcc-supply = <&hsusb2_power>;
+		#phy-cells = <0>;
 	};
 
 	leds {
diff --git a/dts/src/arm/omap3-gta04.dtsi b/dts/src/arm/omap3-gta04.dtsi
index 4504908c23..3dc56fb156 100644
--- a/dts/src/arm/omap3-gta04.dtsi
+++ b/dts/src/arm/omap3-gta04.dtsi
@@ -120,6 +120,7 @@
 	hsusb2_phy: hsusb2_phy {
 		compatible = "usb-nop-xceiv";
 		reset-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
+		#phy-cells = <0>;
 	};
 
 	tv0: connector {
diff --git a/dts/src/arm/omap3-igep0020-common.dtsi b/dts/src/arm/omap3-igep0020-common.dtsi
index 667f962457..ecbec23af4 100644
--- a/dts/src/arm/omap3-igep0020-common.dtsi
+++ b/dts/src/arm/omap3-igep0020-common.dtsi
@@ -58,6 +58,7 @@
 		compatible = "usb-nop-xceiv";
 		reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; /* gpio_24 */
 		vcc-supply = <&hsusb1_power>;
+		#phy-cells = <0>;
 	};
 
 	tfp410: encoder {
diff --git a/dts/src/arm/omap3-igep0030-common.dtsi b/dts/src/arm/omap3-igep0030-common.dtsi
index e94d942745..443f717074 100644
--- a/dts/src/arm/omap3-igep0030-common.dtsi
+++ b/dts/src/arm/omap3-igep0030-common.dtsi
@@ -37,6 +37,7 @@
 	hsusb2_phy: hsusb2_phy {
 		compatible = "usb-nop-xceiv";
 		reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;		/* gpio_54 */
+		#phy-cells = <0>;
 	};
 };
 
diff --git a/dts/src/arm/omap3-lilly-a83x.dtsi b/dts/src/arm/omap3-lilly-a83x.dtsi
index 343a36d803..7ada1e93e1 100644
--- a/dts/src/arm/omap3-lilly-a83x.dtsi
+++ b/dts/src/arm/omap3-lilly-a83x.dtsi
@@ -51,6 +51,7 @@
 	hsusb1_phy: hsusb1_phy {
 		compatible = "usb-nop-xceiv";
 		vcc-supply = <&reg_vcc3>;
+		#phy-cells = <0>;
 	};
 };
 
diff --git a/dts/src/arm/omap3-overo-base.dtsi b/dts/src/arm/omap3-overo-base.dtsi
index f25e158e71..ac141fcd17 100644
--- a/dts/src/arm/omap3-overo-base.dtsi
+++ b/dts/src/arm/omap3-overo-base.dtsi
@@ -51,6 +51,7 @@
 		compatible = "usb-nop-xceiv";
 		reset-gpios = <&gpio6 23 GPIO_ACTIVE_LOW>;	/* gpio_183 */
 		vcc-supply = <&hsusb2_power>;
+		#phy-cells = <0>;
 	};
 
 	/* Regulator to trigger the nPoweron signal of the Wifi module */
diff --git a/dts/src/arm/omap3-pandora-common.dtsi b/dts/src/arm/omap3-pandora-common.dtsi
index 53e007abdc..cd53dc6c00 100644
--- a/dts/src/arm/omap3-pandora-common.dtsi
+++ b/dts/src/arm/omap3-pandora-common.dtsi
@@ -205,6 +205,7 @@
 		compatible = "usb-nop-xceiv";
 		reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; /* GPIO_16 */
 		vcc-supply = <&vaux2>;
+		#phy-cells = <0>;
 	};
 
 	/* HS USB Host VBUS supply
diff --git a/dts/src/arm/omap3-tao3530.dtsi b/dts/src/arm/omap3-tao3530.dtsi
index 9a601d1524..6f5bd027b7 100644
--- a/dts/src/arm/omap3-tao3530.dtsi
+++ b/dts/src/arm/omap3-tao3530.dtsi
@@ -46,6 +46,7 @@
 		compatible = "usb-nop-xceiv";
 		reset-gpios = <&gpio6 2 GPIO_ACTIVE_LOW>;	/* gpio_162 */
 		vcc-supply = <&hsusb2_power>;
+		#phy-cells = <0>;
 	};
 
 	sound {
diff --git a/dts/src/arm/omap3.dtsi b/dts/src/arm/omap3.dtsi
index 90b5c7148f..bb33935df7 100644
--- a/dts/src/arm/omap3.dtsi
+++ b/dts/src/arm/omap3.dtsi
@@ -715,6 +715,7 @@
 				compatible = "ti,ohci-omap3";
 				reg = <0x48064400 0x400>;
 				interrupts = <76>;
+				remote-wakeup-connected;
 			};
 
 			usbhsehci: ehci@48064800 {
diff --git a/dts/src/arm/omap4-droid4-xt894.dts b/dts/src/arm/omap4-droid4-xt894.dts
index 8b93d37310..24a463f864 100644
--- a/dts/src/arm/omap4-droid4-xt894.dts
+++ b/dts/src/arm/omap4-droid4-xt894.dts
@@ -73,6 +73,7 @@
 	/* HS USB Host PHY on PORT 1 */
 	hsusb1_phy: hsusb1_phy {
 		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
 	};
 
 	/* LCD regulator from sw5 source */
diff --git a/dts/src/arm/omap4-duovero.dtsi b/dts/src/arm/omap4-duovero.dtsi
index 6e6810c258..eb123b24c8 100644
--- a/dts/src/arm/omap4-duovero.dtsi
+++ b/dts/src/arm/omap4-duovero.dtsi
@@ -43,6 +43,7 @@
 	hsusb1_phy: hsusb1_phy {
 		compatible = "usb-nop-xceiv";
 		reset-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>;	/* gpio_62 */
+		#phy-cells = <0>;
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&hsusb1phy_pins>;
diff --git a/dts/src/arm/omap4-panda-common.dtsi b/dts/src/arm/omap4-panda-common.dtsi
index 22c1eee9b0..5501d1b4e6 100644
--- a/dts/src/arm/omap4-panda-common.dtsi
+++ b/dts/src/arm/omap4-panda-common.dtsi
@@ -89,6 +89,7 @@
 	hsusb1_phy: hsusb1_phy {
 		compatible = "usb-nop-xceiv";
 		reset-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>;   /* gpio_62 */
+		#phy-cells = <0>;
 		vcc-supply = <&hsusb1_power>;
 		clocks = <&auxclk3_ck>;
 		clock-names = "main_clk";
diff --git a/dts/src/arm/omap4-var-som-om44.dtsi b/dts/src/arm/omap4-var-som-om44.dtsi
index 6500bfc8d1..10fce28ceb 100644
--- a/dts/src/arm/omap4-var-som-om44.dtsi
+++ b/dts/src/arm/omap4-var-som-om44.dtsi
@@ -44,6 +44,7 @@
 
 		reset-gpios = <&gpio6 17 GPIO_ACTIVE_LOW>; /* gpio 177 */
 		vcc-supply = <&vbat>;
+		#phy-cells = <0>;
 
 		clocks = <&auxclk3_ck>;
 		clock-names = "main_clk";
diff --git a/dts/src/arm/omap4.dtsi b/dts/src/arm/omap4.dtsi
index 1dc5a76b3c..cc1a07a362 100644
--- a/dts/src/arm/omap4.dtsi
+++ b/dts/src/arm/omap4.dtsi
@@ -398,7 +398,7 @@
 		elm: elm@48078000 {
 			compatible = "ti,am3352-elm";
 			reg = <0x48078000 0x2000>;
-			interrupts = <4>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "elm";
 			status = "disabled";
 		};
@@ -1081,14 +1081,13 @@
 			usbhsohci: ohci@4a064800 {
 				compatible = "ti,ohci-omap3";
 				reg = <0x4a064800 0x400>;
-				interrupt-parent = <&gic>;
 				interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+				remote-wakeup-connected;
 			};
 
 			usbhsehci: ehci@4a064c00 {
 				compatible = "ti,ehci-omap";
 				reg = <0x4a064c00 0x400>;
-				interrupt-parent = <&gic>;
 				interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
 			};
 		};
diff --git a/dts/src/arm/omap5-board-common.dtsi b/dts/src/arm/omap5-board-common.dtsi
index 575ecffb0e..1b20838bb9 100644
--- a/dts/src/arm/omap5-board-common.dtsi
+++ b/dts/src/arm/omap5-board-common.dtsi
@@ -73,12 +73,14 @@
 		clocks = <&auxclk1_ck>;
 		clock-names = "main_clk";
 		clock-frequency = <19200000>;
+		#phy-cells = <0>;
 	};
 
 	/* HS USB Host PHY on PORT 3 */
 	hsusb3_phy: hsusb3_phy {
 		compatible = "usb-nop-xceiv";
 		reset-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>; /* gpio3_79 ETH_NRESET */
+		#phy-cells = <0>;
 	};
 
 	tpd12s015: encoder {
diff --git a/dts/src/arm/omap5-cm-t54.dts b/dts/src/arm/omap5-cm-t54.dts
index 5b172a04b6..5e21fb430a 100644
--- a/dts/src/arm/omap5-cm-t54.dts
+++ b/dts/src/arm/omap5-cm-t54.dts
@@ -63,12 +63,14 @@
 	hsusb2_phy: hsusb2_phy {
 		compatible = "usb-nop-xceiv";
 		reset-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>; /* gpio3_76 HUB_RESET */
+		#phy-cells = <0>;
 	};
 
 	/* HS USB Host PHY on PORT 3 */
 	hsusb3_phy: hsusb3_phy {
 		compatible = "usb-nop-xceiv";
 		reset-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; /* gpio3_83 ETH_RESET */
+		#phy-cells = <0>;
 	};
 
 	leds {
diff --git a/dts/src/arm/omap5.dtsi b/dts/src/arm/omap5.dtsi
index 4cd0005e46..51a7fb3d7b 100644
--- a/dts/src/arm/omap5.dtsi
+++ b/dts/src/arm/omap5.dtsi
@@ -940,6 +940,7 @@
 				compatible = "ti,ohci-omap3";
 				reg = <0x4a064800 0x400>;
 				interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+				remote-wakeup-connected;
 			};
 
 			usbhsehci: ehci@4a064c00 {
diff --git a/dts/src/arm/r8a7790.dtsi b/dts/src/arm/r8a7790.dtsi
index 2f017fee40..62baabd757 100644
--- a/dts/src/arm/r8a7790.dtsi
+++ b/dts/src/arm/r8a7790.dtsi
@@ -1201,6 +1201,7 @@
 		clock-names = "extal", "usb_extal";
 		#clock-cells = <2>;
 		#power-domain-cells = <0>;
+		#reset-cells = <1>;
 	};
 
 	prr: chipid@ff000044 {
diff --git a/dts/src/arm/r8a7792.dtsi b/dts/src/arm/r8a7792.dtsi
index 131f65b042..3d080e0737 100644
--- a/dts/src/arm/r8a7792.dtsi
+++ b/dts/src/arm/r8a7792.dtsi
@@ -829,6 +829,7 @@
 			clock-names = "extal";
 			#clock-cells = <2>;
 			#power-domain-cells = <0>;
+			#reset-cells = <1>;
 		};
 	};
 
diff --git a/dts/src/arm/r8a7793.dtsi b/dts/src/arm/r8a7793.dtsi
index 58eae569b4..0cd1035de1 100644
--- a/dts/src/arm/r8a7793.dtsi
+++ b/dts/src/arm/r8a7793.dtsi
@@ -1088,6 +1088,7 @@
 		clock-names = "extal", "usb_extal";
 		#clock-cells = <2>;
 		#power-domain-cells = <0>;
+		#reset-cells = <1>;
 	};
 
 	rst: reset-controller@e6160000 {
diff --git a/dts/src/arm/r8a7794.dtsi b/dts/src/arm/r8a7794.dtsi
index 905e50c9b5..5643976c13 100644
--- a/dts/src/arm/r8a7794.dtsi
+++ b/dts/src/arm/r8a7794.dtsi
@@ -1099,6 +1099,7 @@
 		clock-names = "extal", "usb_extal";
 		#clock-cells = <2>;
 		#power-domain-cells = <0>;
+		#reset-cells = <1>;
 	};
 
 	rst: reset-controller@e6160000 {
diff --git a/dts/src/arm/vf610-zii-dev-rev-c.dts b/dts/src/arm/vf610-zii-dev-rev-c.dts
index 02a6227c71..fbb3758ca2 100644
--- a/dts/src/arm/vf610-zii-dev-rev-c.dts
+++ b/dts/src/arm/vf610-zii-dev-rev-c.dts
@@ -359,7 +359,7 @@
 };
 
 &i2c1 {
-	at24mac602@0 {
+	at24mac602@50 {
 		compatible = "atmel,24c02";
 		reg = <0x50>;
 		read-only;