summaryrefslogtreecommitdiffstats
path: root/dts/src/mips/ingenic
diff options
context:
space:
mode:
authorSascha Hauer <s.hauer@pengutronix.de>2020-06-23 12:14:59 +0200
committerSascha Hauer <s.hauer@pengutronix.de>2020-07-05 20:49:06 +0200
commitabef60363d8ecac66e45853f328afa8eeb9e00fd (patch)
treec7d6f1dcf0ef5154b9182da86f1acad048cb7da1 /dts/src/mips/ingenic
parente307bc559a2830b7f695150212ea1b26cdca69fb (diff)
downloadbarebox-abef60363d8ecac66e45853f328afa8eeb9e00fd.tar.gz
barebox-abef60363d8ecac66e45853f328afa8eeb9e00fd.tar.xz
dts: update to v5.8-rc1
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Diffstat (limited to 'dts/src/mips/ingenic')
-rw-r--r--dts/src/mips/ingenic/ci20.dts3
-rw-r--r--dts/src/mips/ingenic/gcw0.dts505
-rw-r--r--dts/src/mips/ingenic/gcw0_proto.dts13
-rw-r--r--dts/src/mips/ingenic/jz4740.dtsi33
-rw-r--r--dts/src/mips/ingenic/jz4770.dtsi227
-rw-r--r--dts/src/mips/ingenic/jz4780.dtsi65
-rw-r--r--dts/src/mips/ingenic/x1000.dtsi9
7 files changed, 795 insertions, 60 deletions
diff --git a/dts/src/mips/ingenic/ci20.dts b/dts/src/mips/ingenic/ci20.dts
index db0ca250bd..75f5bfbf2c 100644
--- a/dts/src/mips/ingenic/ci20.dts
+++ b/dts/src/mips/ingenic/ci20.dts
@@ -386,6 +386,9 @@
interrupt-parent = <&gpe>;
interrupts = <19 4>;
+
+ nvmem-cells = <&eth0_addr>;
+ nvmem-cell-names = "mac-address";
};
};
diff --git a/dts/src/mips/ingenic/gcw0.dts b/dts/src/mips/ingenic/gcw0.dts
index f58d239c20..8d22828787 100644
--- a/dts/src/mips/ingenic/gcw0.dts
+++ b/dts/src/mips/ingenic/gcw0.dts
@@ -4,6 +4,10 @@
#include "jz4770.dtsi"
#include <dt-bindings/clock/ingenic,tcu.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/iio/adc/ingenic,adc.h>
+#include <dt-bindings/input/input.h>
+
/ {
compatible = "gcw,zero", "ingenic,jz4770";
model = "GCW Zero";
@@ -15,20 +19,370 @@
serial3 = &uart3;
};
+ memory: memory {
+ device_type = "memory";
+ reg = <0x0 0x10000000>,
+ <0x30000000 0x10000000>;
+ };
+
chosen {
stdout-path = "serial2:57600n8";
};
- board {
- compatible = "simple-bus";
+ vcc: regulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc";
+
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ mmc1_power: regulator@1 {
+ compatible = "regulator-fixed";
+ regulator-name = "mmc1_vcc";
+ gpio = <&gpe 9 0>;
+
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc>;
+ };
+
+ headphones_amp: analog-amplifier@0 {
+ compatible = "simple-audio-amplifier";
+ enable-gpios = <&gpf 3 GPIO_ACTIVE_LOW>;
+ enable-delay-ms = <50>;
+
+ VCC-supply = <&ldo5>;
+ sound-name-prefix = "Headphones Amp";
+ };
+
+ speaker_amp: analog-amplifier@1 {
+ compatible = "simple-audio-amplifier";
+ enable-gpios = <&gpf 20 GPIO_ACTIVE_HIGH>;
+
+ VCC-supply = <&ldo5>;
+ sound-name-prefix = "Speaker Amp";
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+
+ simple-audio-card,name = "gcw0-audio";
+ simple-audio-card,format = "i2s";
+
+ simple-audio-card,widgets =
+ "Speaker", "Speaker",
+ "Headphone", "Headphones",
+ "Line", "FM Radio",
+ "Microphone", "Built-in Mic";
+ simple-audio-card,routing =
+ "Headphones Amp INL", "LHPOUT",
+ "Headphones Amp INR", "RHPOUT",
+ "Headphones", "Headphones Amp OUTL",
+ "Headphones", "Headphones Amp OUTR",
+ "Speaker Amp INL", "LOUT",
+ "Speaker Amp INR", "ROUT",
+ "Speaker", "Speaker Amp OUTL",
+ "Speaker", "Speaker Amp OUTR",
+ "LLINEIN", "FM Radio",
+ "RLINEIN", "FM Radio",
+ "Built-in Mic", "MICBIAS",
+ "MIC1P", "Built-in Mic",
+ "MIC1N", "Built-in Mic";
+ simple-audio-card,pin-switches = "Speaker", "Headphones";
+
+ simple-audio-card,hp-det-gpio = <&gpf 21 GPIO_ACTIVE_HIGH>;
+ simple-audio-card,aux-devs = <&speaker_amp>, <&headphones_amp>;
+
+ simple-audio-card,bitclock-master = <&dai_codec>;
+ simple-audio-card,frame-master = <&dai_codec>;
+
+ dai_cpu: simple-audio-card,cpu {
+ sound-dai = <&aic>;
+ };
+
+ dai_codec: simple-audio-card,codec {
+ sound-dai = <&codec>;
+ };
+ };
+
+ rumble {
+ compatible = "pwm-vibrator";
+ pwms = <&pwm 4 2000000 0>;
+ pwm-names = "enable";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_pwm4>;
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm 1 40000 0>;
+ power-supply = <&vcc>;
+
+ brightness-levels = <0 16 32 48 64 80 96 112 128
+ 144 160 176 192 208 224 240 255>;
+ default-brightness-level = <12>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_pwm1>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ autorepeat;
+
+ button@0 {
+ label = "D-pad up";
+ linux,code = <KEY_UP>;
+ linux,can-disable;
+ gpios = <&gpe 21 GPIO_ACTIVE_LOW>;
+ };
+
+ button@1 {
+ label = "D-pad down";
+ linux,code = <KEY_DOWN>;
+ linux,can-disable;
+ gpios = <&gpe 25 GPIO_ACTIVE_LOW>;
+ };
+
+ button@2 {
+ label = "D-pad left";
+ linux,code = <KEY_LEFT>;
+ linux,can-disable;
+ gpios = <&gpe 23 GPIO_ACTIVE_LOW>;
+ };
+
+ button@3 {
+ label = "D-pad right";
+ linux,code = <KEY_RIGHT>;
+ linux,can-disable;
+ gpios = <&gpe 24 GPIO_ACTIVE_LOW>;
+ };
+
+ button@4 {
+ label = "Button A";
+ linux,code = <KEY_LEFTCTRL>;
+ linux,can-disable;
+ gpios = <&gpe 29 GPIO_ACTIVE_LOW>;
+ };
+
+ button@5 {
+ label = "Button B";
+ linux,code = <KEY_LEFTALT>;
+ linux,can-disable;
+ gpios = <&gpe 20 GPIO_ACTIVE_LOW>;
+ };
+
+ button@6 {
+ label = "Button Y";
+ linux,code = <KEY_SPACE>;
+ linux,can-disable;
+ gpios = <&gpe 27 GPIO_ACTIVE_LOW>;
+ };
+
+ button@7 {
+ label = "Button X";
+ linux,code = <KEY_LEFTSHIFT>;
+ linux,can-disable;
+ gpios = <&gpe 28 GPIO_ACTIVE_LOW>;
+ };
+
+ button@8 {
+ label = "Left shoulder button";
+ linux,code = <KEY_TAB>;
+ linux,can-disable;
+ gpios = <&gpb 20 GPIO_ACTIVE_LOW>;
+ };
+
+ button@9 {
+ label = "Right shoulder button";
+ linux,code = <KEY_BACKSPACE>;
+ linux,can-disable;
+ gpios = <&gpe 26 GPIO_ACTIVE_LOW>;
+ };
+
+ button@10 {
+ label = "Start button";
+ linux,code = <KEY_ENTER>;
+ linux,can-disable;
+ gpios = <&gpb 21 GPIO_ACTIVE_LOW>;
+ };
+
+ button@11 {
+ label = "Select button";
+ linux,code = <KEY_ESC>;
+ linux,can-disable;
+ /*
+ * This is the only button that is active high,
+ * since it doubles as BOOT_SEL1.
+ */
+ gpios = <&gpd 18 GPIO_ACTIVE_HIGH>;
+ };
+
+ button@12 {
+ label = "Power slider";
+ linux,code = <KEY_POWER>;
+ linux,can-disable;
+ gpios = <&gpa 30 GPIO_ACTIVE_LOW>;
+ wakeup-source;
+ };
+
+ button@13 {
+ label = "Power hold";
+ linux,code = <KEY_PAUSE>;
+ linux,can-disable;
+ gpios = <&gpf 11 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ i2c3: i2c-controller@3 {
+ compatible = "i2c-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sda-gpios = <&gpd 5 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&gpd 4 GPIO_ACTIVE_HIGH>;
+ i2c-gpio,delay-us = <2>; /* 250 kHz */
+
+ act8600: pmic@5a {
+ compatible = "active-semi,act8600";
+ reg = <0x5a>;
+
+ regulators {
+ /* USB OTG */
+ otg_vbus: SUDCDC_REG4 {
+ /*
+ * 5.3V instead of 5.0V to compensate
+ * for the voltage drop of a diode
+ * between the regulator and the
+ * connector.
+ */
+ regulator-min-microvolt = <5300000>;
+ regulator-max-microvolt = <5300000>;
+ inl-supply = <&vcc>;
+ };
+
+ /*
+ * When this is off, there is no sound, but also
+ * no USB networking.
+ */
+ ldo5: LDO5 {
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ inl-supply = <&vcc>;
+ };
+
+ /* LCD panel and FM radio */
+ ldo6: LDO6 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ inl-supply = <&vcc>;
+ };
+
+ /* ??? */
+ LDO7 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ /*regulator-always-on;*/
+ inl-supply = <&vcc>;
+ };
+
+ /*
+ * The colors on the LCD are wrong when this is
+ * off. Which is strange, since the LCD panel
+ * data sheet only mentions a 3.3V input.
+ */
+ LDO8 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ inl-supply = <&vcc>;
+ };
+
+ /* RTC fixed 3.3V */
+ LDO_REG9 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ inl-supply = <&vcc>;
+ };
+
+ /* Unused fixed 1.2V */
+ LDO_REG10 {
+ inl-supply = <&vcc>;
+ };
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led {
+ gpios = <&gpb 30 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+ };
+
+ spi {
+ compatible = "spi-gpio";
#address-cells = <1>;
- #size-cells = <1>;
- ranges;
+ #size-cells = <0>;
+
+ sck-gpios = <&gpe 15 GPIO_ACTIVE_HIGH>;
+ mosi-gpios = <&gpe 17 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpe 16 GPIO_ACTIVE_HIGH>;
+ num-chipselects = <1>;
+
+ nt39016@0 {
+ compatible = "kingdisplay,kd035g6-54nt";
+ reg = <0>;
+
+ spi-max-frequency = <3125000>;
+ spi-3wire;
+ spi-cs-high;
- otg_phy: otg-phy {
- compatible = "usb-nop-xceiv";
- clocks = <&cgu JZ4770_CLK_OTG_PHY>;
- clock-names = "main_clk";
+ reset-gpios = <&gpe 2 GPIO_ACTIVE_LOW>;
+
+ backlight = <&backlight>;
+ power-supply = <&ldo6>;
+
+ port {
+ panel_input: endpoint {
+ remote-endpoint = <&panel_output>;
+ };
+ };
+ };
+ };
+
+ connector {
+ compatible = "gpio-usb-b-connector", "usb-b-connector";
+ label = "mini-USB";
+ type = "mini";
+
+ /*
+ * USB OTG is not yet working reliably, the ID detection
+ * mechanism tends to fry easily for unknown reasons.
+ * Until this is fixed, disable OTG by not providing the
+ * ID GPIO to the driver.
+ */
+ //id-gpios = <&gpf 18 GPIO_ACTIVE_LOW>;
+
+ vbus-gpios = <&gpb 5 GPIO_ACTIVE_HIGH>;
+ vbus-supply = <&otg_vbus>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_otg>;
+
+ port {
+ usb_ep: endpoint {
+ remote-endpoint = <&usb_otg_ep>;
+ };
};
};
};
@@ -37,24 +391,86 @@
clock-frequency = <12000000>;
};
+&pinctrl {
+ pins_lcd: lcd {
+ function = "lcd";
+ groups = "lcd-24bit";
+ };
+
+ pins_uart2: uart2 {
+ function = "uart2";
+ groups = "uart2-data";
+ };
+
+ pins_mmc0: mmc0 {
+ function = "mmc0";
+ groups = "mmc0-1bit-a", "mmc0-4bit-a";
+ };
+
+ pins_mmc1: mmc1 {
+ function = "mmc1";
+ groups = "mmc1-1bit-d", "mmc1-4bit-d";
+ };
+
+ pins_otg: otg {
+ otg-vbus-pin {
+ function = "otg";
+ groups = "otg-vbus";
+ };
+
+ vbus-pin {
+ pins = "PB5";
+ bias-disable;
+ };
+ };
+
+ pins_pwm1: pwm1 {
+ function = "pwm1";
+ groups = "pwm1";
+ };
+
+ pins_pwm4: pwm4 {
+ function = "pwm4";
+ groups = "pwm4";
+ };
+};
+
&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_uart2>;
+
status = "okay";
};
&cgu {
- /* Put high-speed peripherals under PLL1, such that we can change the
+ /*
+ * Put high-speed peripherals under PLL1, such that we can change the
* PLL0 frequency on demand without having to suspend peripherals.
* We use a rate of 432 MHz, which is the least common multiple of
* 27 MHz (required by TV encoder) and 48 MHz (required by USB host).
+ * Put the GPU under PLL0 since we want a higher frequency.
+ * Use the 32 kHz oscillator as the parent of the RTC for a higher
+ * precision.
*/
assigned-clocks =
<&cgu JZ4770_CLK_PLL1>,
- <&cgu JZ4770_CLK_UHC>;
+ <&cgu JZ4770_CLK_GPU>,
+ <&cgu JZ4770_CLK_RTC>,
+ <&cgu JZ4770_CLK_UHC>,
+ <&cgu JZ4770_CLK_LPCLK_MUX>,
+ <&cgu JZ4770_CLK_MMC0_MUX>,
+ <&cgu JZ4770_CLK_MMC1_MUX>;
assigned-clock-parents =
<0>,
+ <&cgu JZ4770_CLK_PLL0>,
+ <&cgu JZ4770_CLK_OSC32K>,
+ <&cgu JZ4770_CLK_PLL1>,
+ <&cgu JZ4770_CLK_PLL1>,
+ <&cgu JZ4770_CLK_PLL1>,
<&cgu JZ4770_CLK_PLL1>;
assigned-clock-rates =
- <432000000>;
+ <432000000>,
+ <600000000>;
};
&uhc {
@@ -63,10 +479,69 @@
};
&tcu {
- /* 750 kHz for the system timer and clocksource */
- assigned-clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER2>;
- assigned-clock-rates = <750000>, <750000>;
+ /*
+ * 750 kHz for the system timer and clocksource, 12 MHz for the OST,
+ * and use RTC as the parent for the watchdog clock
+ */
+ assigned-clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER2>,
+ <&tcu TCU_CLK_OST>, <&tcu TCU_CLK_WDT>;
+ assigned-clock-parents = <0>, <0>, <0>, <&cgu JZ4770_CLK_RTC>;
+ assigned-clock-rates = <750000>, <750000>, <12000000>;
- /* PWM1 is in use, so reserve channel #2 for the clocksource */
+ /* PWM1 is in use, so use channel #2 for the clocksource */
ingenic,pwm-channels-mask = <0xfa>;
};
+
+&usb_otg {
+ port {
+ usb_otg_ep: endpoint {
+ remote-endpoint = <&usb_ep>;
+ };
+ };
+};
+
+&otg_phy {
+ vcc-supply = <&ldo5>;
+};
+
+&rtc {
+ clocks = <&cgu JZ4770_CLK_RTC>;
+ clock-names = "rtc";
+
+ system-power-controller;
+};
+
+&mmc0 {
+ status = "okay";
+
+ bus-width = <4>;
+ max-frequency = <48000000>;
+ vmmc-supply = <&vcc>;
+ non-removable;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_mmc0>;
+};
+
+&mmc1 {
+ status = "okay";
+
+ bus-width = <4>;
+ max-frequency = <48000000>;
+ cd-gpios = <&gpb 2 GPIO_ACTIVE_LOW>;
+ vmmc-supply = <&mmc1_power>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_mmc1>;
+};
+
+&lcd {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_lcd>;
+
+ port {
+ panel_output: endpoint {
+ remote-endpoint = <&panel_input>;
+ };
+ };
+};
diff --git a/dts/src/mips/ingenic/gcw0_proto.dts b/dts/src/mips/ingenic/gcw0_proto.dts
new file mode 100644
index 0000000000..02df22f8ae
--- /dev/null
+++ b/dts/src/mips/ingenic/gcw0_proto.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "gcw0.dts"
+
+/ {
+ model = "GCW Zero Prototype";
+};
+
+&memory {
+ /* Prototype has only 256 MiB of RAM */
+ reg = <0x0 0x10000000>;
+};
diff --git a/dts/src/mips/ingenic/jz4740.dtsi b/dts/src/mips/ingenic/jz4740.dtsi
index a3301bab92..1520585c23 100644
--- a/dts/src/mips/ingenic/jz4740.dtsi
+++ b/dts/src/mips/ingenic/jz4740.dtsi
@@ -55,10 +55,10 @@
#clock-cells = <1>;
- clocks = <&cgu JZ4740_CLK_RTC
- &cgu JZ4740_CLK_EXT
- &cgu JZ4740_CLK_PCLK
- &cgu JZ4740_CLK_TCU>;
+ clocks = <&cgu JZ4740_CLK_RTC>,
+ <&cgu JZ4740_CLK_EXT>,
+ <&cgu JZ4740_CLK_PCLK>,
+ <&cgu JZ4740_CLK_TCU>;
clock-names = "rtc", "ext", "pclk", "tcu";
interrupt-controller;
@@ -74,6 +74,20 @@
clocks = <&tcu TCU_CLK_WDT>;
clock-names = "wdt";
};
+
+ pwm: pwm@40 {
+ compatible = "ingenic,jz4740-pwm";
+ reg = <0x40 0x80>;
+
+ #pwm-cells = <3>;
+
+ clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER1>,
+ <&tcu TCU_CLK_TIMER2>, <&tcu TCU_CLK_TIMER3>,
+ <&tcu TCU_CLK_TIMER4>, <&tcu TCU_CLK_TIMER5>,
+ <&tcu TCU_CLK_TIMER6>, <&tcu TCU_CLK_TIMER7>;
+ clock-names = "timer0", "timer1", "timer2", "timer3",
+ "timer4", "timer5", "timer6", "timer7";
+ };
};
rtc_dev: rtc@10003000 {
@@ -241,10 +255,10 @@
reg = <0x13010000 0x54>;
#address-cells = <2>;
#size-cells = <1>;
- ranges = <1 0 0x18000000 0x4000000
- 2 0 0x14000000 0x4000000
- 3 0 0x0c000000 0x4000000
- 4 0 0x08000000 0x4000000>;
+ ranges = <1 0 0x18000000 0x4000000>,
+ <2 0 0x14000000 0x4000000>,
+ <3 0 0x0c000000 0x4000000>,
+ <4 0 0x08000000 0x4000000>;
clocks = <&cgu JZ4740_CLK_MCLK>;
};
@@ -258,8 +272,7 @@
dmac: dma-controller@13020000 {
compatible = "ingenic,jz4740-dma";
- reg = <0x13020000 0xbc
- 0x13020300 0x14>;
+ reg = <0x13020000 0xbc>, <0x13020300 0x14>;
#dma-cells = <2>;
interrupt-parent = <&intc>;
diff --git a/dts/src/mips/ingenic/jz4770.dtsi b/dts/src/mips/ingenic/jz4770.dtsi
index 0bfb9edff3..fa11ac9504 100644
--- a/dts/src/mips/ingenic/jz4770.dtsi
+++ b/dts/src/mips/ingenic/jz4770.dtsi
@@ -1,6 +1,7 @@
// SPDX-License-Identifier: GPL-2.0
#include <dt-bindings/clock/jz4770-cgu.h>
+#include <dt-bindings/clock/ingenic,tcu.h>
/ {
#address-cells = <1>;
@@ -37,13 +38,25 @@
};
cgu: jz4770-cgu@10000000 {
- compatible = "ingenic,jz4770-cgu";
+ compatible = "ingenic,jz4770-cgu", "simple-mfd";
reg = <0x10000000 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x10000000 0x100>;
clocks = <&ext>, <&osc32k>;
clock-names = "ext", "osc32k";
#clock-cells = <1>;
+
+ otg_phy: usb-phy@3c {
+ compatible = "ingenic,jz4770-phy";
+ reg = <0x3c 0x10>;
+
+ clocks = <&cgu JZ4770_CLK_OTG_PHY>;
+
+ #phy-cells = <0>;
+ };
};
tcu: timer@10002000 {
@@ -55,9 +68,9 @@
#clock-cells = <1>;
- clocks = <&cgu JZ4770_CLK_RTC
- &cgu JZ4770_CLK_EXT
- &cgu JZ4770_CLK_PCLK>;
+ clocks = <&cgu JZ4770_CLK_RTC>,
+ <&cgu JZ4770_CLK_EXT>,
+ <&cgu JZ4770_CLK_PCLK>;
clock-names = "rtc", "ext", "pclk";
interrupt-controller;
@@ -65,6 +78,47 @@
interrupt-parent = <&intc>;
interrupts = <27 26 25>;
+
+ watchdog: watchdog@0 {
+ compatible = "ingenic,jz4770-watchdog",
+ "ingenic,jz4740-watchdog";
+ reg = <0x0 0xc>;
+
+ clocks = <&tcu TCU_CLK_WDT>;
+ clock-names = "wdt";
+ };
+
+ pwm: pwm@40 {
+ compatible = "ingenic,jz4770-pwm", "ingenic,jz4740-pwm";
+ reg = <0x40 0x80>;
+
+ #pwm-cells = <3>;
+
+ clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER1>,
+ <&tcu TCU_CLK_TIMER2>, <&tcu TCU_CLK_TIMER3>,
+ <&tcu TCU_CLK_TIMER4>, <&tcu TCU_CLK_TIMER5>,
+ <&tcu TCU_CLK_TIMER6>, <&tcu TCU_CLK_TIMER7>;
+ clock-names = "timer0", "timer1", "timer2", "timer3",
+ "timer4", "timer5", "timer6", "timer7";
+ };
+
+ ost: timer@e0 {
+ compatible = "ingenic,jz4770-ost";
+ reg = <0xe0 0x20>;
+
+ clocks = <&tcu TCU_CLK_OST>;
+ clock-names = "ost";
+
+ interrupts = <15>;
+ };
+ };
+
+ rtc: rtc@10003000 {
+ compatible = "ingenic,jz4770-rtc", "ingenic,jz4760-rtc";
+ reg = <0x10003000 0x40>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <32>;
};
pinctrl: pin-controller@10010000 {
@@ -165,6 +219,93 @@
};
};
+ aic: audio-controller@10020000 {
+ compatible = "ingenic,jz4770-i2s";
+ reg = <0x10020000 0x94>;
+
+ #sound-dai-cells = <0>;
+
+ clocks = <&cgu JZ4770_CLK_AIC>, <&cgu JZ4770_CLK_I2S>,
+ <&cgu JZ4770_CLK_EXT>, <&cgu JZ4770_CLK_PLL0>;
+ clock-names = "aic", "i2s", "ext", "pll half";
+
+ interrupt-parent = <&intc>;
+ interrupts = <34>;
+
+ dmas = <&dmac0 25 0xffffffff>, <&dmac0 24 0xffffffff>;
+ dma-names = "rx", "tx";
+ };
+
+ codec: audio-codec@100200a0 {
+ compatible = "ingenic,jz4770-codec";
+ reg = <0x100200a4 0x8>;
+
+ #sound-dai-cells = <0>;
+
+ clocks = <&cgu JZ4770_CLK_AIC>;
+ clock-names = "aic";
+ };
+
+ mmc0: mmc@10021000 {
+ compatible = "ingenic,jz4770-mmc", "ingenic,jz4760-mmc";
+ reg = <0x10021000 0x1000>;
+
+ clocks = <&cgu JZ4770_CLK_MMC0>;
+ clock-names = "mmc";
+
+ interrupt-parent = <&intc>;
+ interrupts = <37>;
+
+ dmas = <&dmac1 27 0xffffffff>, <&dmac1 26 0xffffffff>;
+ dma-names = "rx", "tx";
+
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ cap-sdio-irq;
+
+ status = "disabled";
+ };
+
+ mmc1: mmc@10022000 {
+ compatible = "ingenic,jz4770-mmc", "ingenic,jz4760-mmc";
+ reg = <0x10022000 0x1000>;
+
+ clocks = <&cgu JZ4770_CLK_MMC1>;
+ clock-names = "mmc";
+
+ interrupt-parent = <&intc>;
+ interrupts = <36>;
+
+ dmas = <&dmac1 31 0xffffffff>, <&dmac1 30 0xffffffff>;
+ dma-names = "rx", "tx";
+
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ cap-sdio-irq;
+
+ status = "disabled";
+ };
+
+ mmc2: mmc@10023000 {
+ compatible = "ingenic,jz4770-mmc", "ingenic,jz4760-mmc";
+ reg = <0x10023000 0x1000>;
+
+ clocks = <&cgu JZ4770_CLK_MMC2>;
+ clock-names = "mmc";
+
+ interrupt-parent = <&intc>;
+ interrupts = <35>;
+
+ dmas = <&dmac1 37 0xffffffff>, <&dmac1 36 0xffffffff>;
+ dma-names = "rx", "tx";
+
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ cap-sdio-irq;
+
+ status = "disabled";
+ };
+
uart0: serial@10030000 {
compatible = "ingenic,jz4770-uart";
reg = <0x10030000 0x100>;
@@ -217,34 +358,63 @@
status = "disabled";
};
+ adc: adc@10070000 {
+ compatible = "ingenic,jz4770-adc";
+ reg = <0x10070000 0x30>;
+
+ #io-channel-cells = <1>;
+
+ clocks = <&cgu JZ4770_CLK_ADC>;
+ clock-names = "adc";
+
+ interrupt-parent = <&intc>;
+ interrupts = <18>;
+ };
+
+ gpu: gpu@13040000 {
+ compatible = "vivante,gc";
+ reg = <0x13040000 0x10000>;
+
+ clocks = <&cgu JZ4770_CLK_GPU>,
+ <&cgu JZ4770_CLK_GPU>,
+ <&cgu JZ4770_CLK_GPU>;
+ clock-names = "bus", "core", "shader";
+
+ interrupt-parent = <&intc>;
+ interrupts = <6>;
+ };
+
+ lcd: lcd-controller@13050000 {
+ compatible = "ingenic,jz4770-lcd";
+ reg = <0x13050000 0x300>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <31>;
+
+ clocks = <&cgu JZ4770_CLK_LPCLK_MUX>;
+ clock-names = "lcd_pclk";
+ };
+
dmac0: dma-controller@13420000 {
compatible = "ingenic,jz4770-dma";
- reg = <0x13420000 0xC0
- 0x13420300 0x20>;
+ reg = <0x13420000 0xC0>, <0x13420300 0x20>;
- #dma-cells = <1>;
+ #dma-cells = <2>;
clocks = <&cgu JZ4770_CLK_DMA>;
interrupt-parent = <&intc>;
interrupts = <24>;
-
- /* Disable dmac0 until we have something that uses it */
- status = "disabled";
};
dmac1: dma-controller@13420100 {
compatible = "ingenic,jz4770-dma";
- reg = <0x13420100 0xC0
- 0x13420400 0x20>;
+ reg = <0x13420100 0xC0>, <0x13420400 0x20>;
- #dma-cells = <1>;
+ #dma-cells = <2>;
clocks = <&cgu JZ4770_CLK_DMA>;
interrupt-parent = <&intc>;
interrupts = <23>;
-
- /* Disable dmac1 until we have something that uses it */
- status = "disabled";
};
uhc: uhc@13430000 {
@@ -260,4 +430,29 @@
status = "disabled";
};
+
+ usb_otg: usb@13440000 {
+ compatible = "ingenic,jz4770-musb";
+ reg = <0x13440000 0x10000>;
+
+ clocks = <&cgu JZ4770_CLK_OTG>;
+ clock-names = "udc";
+
+ interrupt-parent = <&intc>;
+ interrupts = <21>;
+ interrupt-names = "mc";
+
+ phys = <&otg_phy>;
+
+ usb-role-switch;
+ };
+
+ rom: memory@1fc00000 {
+ compatible = "mtd-rom";
+ probe-type = "map_rom";
+ reg = <0x1fc00000 0x2000>;
+
+ bank-width = <4>;
+ device-width = <1>;
+ };
};
diff --git a/dts/src/mips/ingenic/jz4780.dtsi b/dts/src/mips/ingenic/jz4780.dtsi
index bb89653d16..b7f409a7cf 100644
--- a/dts/src/mips/ingenic/jz4780.dtsi
+++ b/dts/src/mips/ingenic/jz4780.dtsi
@@ -58,9 +58,9 @@
#clock-cells = <1>;
- clocks = <&cgu JZ4780_CLK_RTCLK
- &cgu JZ4780_CLK_EXCLK
- &cgu JZ4780_CLK_PCLK>;
+ clocks = <&cgu JZ4780_CLK_RTCLK>,
+ <&cgu JZ4780_CLK_EXCLK>,
+ <&cgu JZ4780_CLK_PCLK>;
clock-names = "rtc", "ext", "pclk";
interrupt-controller;
@@ -76,6 +76,30 @@
clocks = <&tcu TCU_CLK_WDT>;
clock-names = "wdt";
};
+
+ pwm: pwm@40 {
+ compatible = "ingenic,jz4780-pwm", "ingenic,jz4740-pwm";
+ reg = <0x40 0x80>;
+
+ #pwm-cells = <3>;
+
+ clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER1>,
+ <&tcu TCU_CLK_TIMER2>, <&tcu TCU_CLK_TIMER3>,
+ <&tcu TCU_CLK_TIMER4>, <&tcu TCU_CLK_TIMER5>,
+ <&tcu TCU_CLK_TIMER6>, <&tcu TCU_CLK_TIMER7>;
+ clock-names = "timer0", "timer1", "timer2", "timer3",
+ "timer4", "timer5", "timer6", "timer7";
+ };
+
+ ost: timer@e0 {
+ compatible = "ingenic,jz4780-ost", "ingenic,jz4770-ost";
+ reg = <0xe0 0x20>;
+
+ clocks = <&tcu TCU_CLK_OST>;
+ clock-names = "ost";
+
+ interrupts = <15>;
+ };
};
rtc_dev: rtc@10003000 {
@@ -196,8 +220,7 @@
gpio-miso = <&gpe 14 0>;
gpio-sck = <&gpe 15 0>;
gpio-mosi = <&gpe 17 0>;
- cs-gpios = <&gpe 16 0
- &gpe 18 0>;
+ cs-gpios = <&gpe 16 0>, <&gpe 18 0>;
spidev@0 {
compatible = "spidev";
@@ -358,26 +381,40 @@
};
nemc: nemc@13410000 {
- compatible = "ingenic,jz4780-nemc";
+ compatible = "ingenic,jz4780-nemc", "simple-mfd";
reg = <0x13410000 0x10000>;
#address-cells = <2>;
#size-cells = <1>;
- ranges = <1 0 0x1b000000 0x1000000
- 2 0 0x1a000000 0x1000000
- 3 0 0x19000000 0x1000000
- 4 0 0x18000000 0x1000000
- 5 0 0x17000000 0x1000000
- 6 0 0x16000000 0x1000000>;
+ ranges = <0 0 0x13410000 0x10000>,
+ <1 0 0x1b000000 0x1000000>,
+ <2 0 0x1a000000 0x1000000>,
+ <3 0 0x19000000 0x1000000>,
+ <4 0 0x18000000 0x1000000>,
+ <5 0 0x17000000 0x1000000>,
+ <6 0 0x16000000 0x1000000>;
clocks = <&cgu JZ4780_CLK_NEMC>;
status = "disabled";
+
+ efuse: efuse@d0 {
+ reg = <0 0xd0 0x30>;
+ compatible = "ingenic,jz4780-efuse";
+
+ clocks = <&cgu JZ4780_CLK_AHB2>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ eth0_addr: eth-mac-addr@0x22 {
+ reg = <0x22 0x6>;
+ };
+ };
};
dma: dma@13420000 {
compatible = "ingenic,jz4780-dma";
- reg = <0x13420000 0x400
- 0x13421000 0x40>;
+ reg = <0x13420000 0x400>, <0x13421000 0x40>;
#dma-cells = <2>;
interrupt-parent = <&intc>;
diff --git a/dts/src/mips/ingenic/x1000.dtsi b/dts/src/mips/ingenic/x1000.dtsi
index 147f7d5c24..59a63a0985 100644
--- a/dts/src/mips/ingenic/x1000.dtsi
+++ b/dts/src/mips/ingenic/x1000.dtsi
@@ -58,9 +58,9 @@
#clock-cells = <1>;
- clocks = <&cgu X1000_CLK_RTCLK
- &cgu X1000_CLK_EXCLK
- &cgu X1000_CLK_PCLK>;
+ clocks = <&cgu X1000_CLK_RTCLK>,
+ <&cgu X1000_CLK_EXCLK>,
+ <&cgu X1000_CLK_PCLK>;
clock-names = "rtc", "ext", "pclk";
interrupt-controller;
@@ -239,8 +239,7 @@
pdma: dma-controller@13420000 {
compatible = "ingenic,x1000-dma";
- reg = <0x13420000 0x400
- 0x13421000 0x40>;
+ reg = <0x13420000 0x400>, <0x13421000 0x40>;
#dma-cells = <2>;
interrupt-parent = <&intc>;