diff options
| author | Sascha Hauer <s.hauer@pengutronix.de> | 2018-11-07 09:48:28 +0100 |
|---|---|---|
| committer | Sascha Hauer <s.hauer@pengutronix.de> | 2018-11-08 08:57:14 +0100 |
| commit | 646d1a09f05689a3a4781112a3b3e4747d0ba231 (patch) | |
| tree | fe48ab82140e06e495051098fde1d97a4b1e56d5 /dts/src | |
| parent | ebc406c1ab2be0e6002e1d8ccbc5c1377a882895 (diff) | |
| download | barebox-646d1a09f05689a3a4781112a3b3e4747d0ba231.tar.gz barebox-646d1a09f05689a3a4781112a3b3e4747d0ba231.tar.xz | |
dts: update to v4.20-rc1
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Diffstat (limited to 'dts/src')
467 files changed, 28810 insertions, 6145 deletions
diff --git a/dts/src/arm/am335x-bone-common.dtsi b/dts/src/arm/am335x-bone-common.dtsi index 73b514dddf..9e5e75ea87 100644 --- a/dts/src/arm/am335x-bone-common.dtsi +++ b/dts/src/arm/am335x-bone-common.dtsi @@ -379,7 +379,7 @@ }; &cpsw_emac0 { - phy_id = <&davinci_mdio>, <0>; + phy-handle = <ðphy0>; phy-mode = "mii"; }; @@ -396,6 +396,10 @@ pinctrl-0 = <&davinci_mdio_default>; pinctrl-1 = <&davinci_mdio_sleep>; status = "okay"; + + ethphy0: ethernet-phy@0 { + reg = <0>; + }; }; &mmc1 { diff --git a/dts/src/arm/am335x-boneblack-common.dtsi b/dts/src/arm/am335x-boneblack-common.dtsi index 325daae402..e543c2bee8 100644 --- a/dts/src/arm/am335x-boneblack-common.dtsi +++ b/dts/src/arm/am335x-boneblack-common.dtsi @@ -7,6 +7,7 @@ */ #include <dt-bindings/display/tda998x.h> +#include <dt-bindings/interrupt-controller/irq.h> &ldo3_reg { regulator-min-microvolt = <1800000>; @@ -88,9 +89,11 @@ }; &i2c0 { - tda19988: tda19988 { + tda19988: tda19988@70 { compatible = "nxp,tda998x"; reg = <0x70>; + nxp,calib-gpios = <&gpio1 25 0>; + interrupts-extended = <&gpio1 25 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default", "off"; pinctrl-0 = <&nxp_hdmi_bonelt_pins>; diff --git a/dts/src/arm/am335x-chiliboard.dts b/dts/src/arm/am335x-chiliboard.dts index 59431b2359..9c2a947aac 100644 --- a/dts/src/arm/am335x-chiliboard.dts +++ b/dts/src/arm/am335x-chiliboard.dts @@ -140,10 +140,14 @@ pinctrl-0 = <&davinci_mdio_default>; pinctrl-1 = <&davinci_mdio_sleep>; status = "okay"; + + ethphy0: ethernet-phy@0 { + reg = <0>; + }; }; &cpsw_emac0 { - phy_id = <&davinci_mdio>, <0>; + phy-handle = <ðphy0>; phy-mode = "rmii"; }; diff --git a/dts/src/arm/am335x-cm-t335.dts b/dts/src/arm/am335x-cm-t335.dts index 947c81b7aa..c4d3e1f1a9 100644 --- a/dts/src/arm/am335x-cm-t335.dts +++ b/dts/src/arm/am335x-cm-t335.dts @@ -486,10 +486,14 @@ status = "okay"; pinctrl-0 = <&davinci_mdio_default>; pinctrl-1 = <&davinci_mdio_sleep>; status = "okay"; + + ethphy0: ethernet-phy@0 { + reg = <0>; + }; }; &cpsw_emac0 { - phy_id = <&davinci_mdio>, <0>; + phy-handle = <ðphy0>; phy-mode = "rgmii-txid"; }; diff --git a/dts/src/arm/am335x-evm.dts b/dts/src/arm/am335x-evm.dts index c87d01297a..98ec9c3e49 100644 --- a/dts/src/arm/am335x-evm.dts +++ b/dts/src/arm/am335x-evm.dts @@ -713,6 +713,7 @@ pinctrl-0 = <&cpsw_default>; pinctrl-1 = <&cpsw_sleep>; status = "okay"; + slaves = <1>; }; &davinci_mdio { @@ -720,15 +721,14 @@ pinctrl-0 = <&davinci_mdio_default>; pinctrl-1 = <&davinci_mdio_sleep>; status = "okay"; -}; -&cpsw_emac0 { - phy_id = <&davinci_mdio>, <0>; - phy-mode = "rgmii-txid"; + ethphy0: ethernet-phy@0 { + reg = <0>; + }; }; -&cpsw_emac1 { - phy_id = <&davinci_mdio>, <1>; +&cpsw_emac0 { + phy-handle = <ðphy0>; phy-mode = "rgmii-txid"; }; diff --git a/dts/src/arm/am335x-evmsk.dts b/dts/src/arm/am335x-evmsk.dts index bf1a40e45c..245868f58f 100644 --- a/dts/src/arm/am335x-evmsk.dts +++ b/dts/src/arm/am335x-evmsk.dts @@ -639,16 +639,24 @@ pinctrl-0 = <&davinci_mdio_default>; pinctrl-1 = <&davinci_mdio_sleep>; status = "okay"; + + ethphy0: ethernet-phy@0 { + reg = <0>; + }; + + ethphy1: ethernet-phy@1 { + reg = <1>; + }; }; &cpsw_emac0 { - phy_id = <&davinci_mdio>, <0>; + phy-handle = <ðphy0>; phy-mode = "rgmii-txid"; dual_emac_res_vlan = <1>; }; &cpsw_emac1 { - phy_id = <&davinci_mdio>, <1>; + phy-handle = <ðphy1>; phy-mode = "rgmii-txid"; dual_emac_res_vlan = <2>; }; diff --git a/dts/src/arm/am335x-igep0033.dtsi b/dts/src/arm/am335x-igep0033.dtsi index a5769a8f5f..55b4c94cfa 100644 --- a/dts/src/arm/am335x-igep0033.dtsi +++ b/dts/src/arm/am335x-igep0033.dtsi @@ -102,15 +102,24 @@ &davinci_mdio { status = "okay"; + + ethphy0: ethernet-phy@0 { + reg = <0>; + }; + + ethphy1: ethernet-phy@1 { + reg = <1>; + }; }; &cpsw_emac0 { - phy_id = <&davinci_mdio>, <0>; + phy-handle = <ðphy0>; phy-mode = "rmii"; + }; &cpsw_emac1 { - phy_id = <&davinci_mdio>, <1>; + phy-handle = <ðphy1>; phy-mode = "rmii"; }; diff --git a/dts/src/arm/am335x-lxm.dts b/dts/src/arm/am335x-lxm.dts index 1d6c6fa703..481edcfaf1 100644 --- a/dts/src/arm/am335x-lxm.dts +++ b/dts/src/arm/am335x-lxm.dts @@ -317,13 +317,13 @@ }; &cpsw_emac0 { - phy_id = <&davinci_mdio>, <5>; + phy-handle = <ðphy0>; phy-mode = "rmii"; dual_emac_res_vlan = <2>; }; &cpsw_emac1 { - phy_id = <&davinci_mdio>, <4>; + phy-handle = <ðphy1>; phy-mode = "rmii"; dual_emac_res_vlan = <3>; }; @@ -345,6 +345,14 @@ pinctrl-0 = <&davinci_mdio_default>; pinctrl-1 = <&davinci_mdio_sleep>; status = "okay"; + + ethphy0: ethernet-phy@5 { + reg = <5>; + }; + + ethphy1: ethernet-phy@4 { + reg = <4>; + }; }; &mmc1 { diff --git a/dts/src/arm/am335x-moxa-uc-2100-common.dtsi b/dts/src/arm/am335x-moxa-uc-2100-common.dtsi new file mode 100644 index 0000000000..14f7819534 --- /dev/null +++ b/dts/src/arm/am335x-moxa-uc-2100-common.dtsi @@ -0,0 +1,249 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2018 MOXA Inc. - https://www.moxa.com/ + * + * Authors: SZ Lin (林上智) <sz.lin@moxa.com> + * Wes Huang (黃淵河) <wes.huang@moxa.com> + * Fero JD Zhou (周俊達) <FeroJD.Zhou@moxa.com> + */ + +#include "am33xx.dtsi" + +/ { + vbat: vbat-regulator { + compatible = "regulator-fixed"; + }; + + /* Power supply provides a fixed 3.3V @3A */ + vmmcsd_fixed: vmmcsd-regulator { + compatible = "regulator-fixed"; + regulator-name = "vmmcsd_fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + + buttons: push_button { + compatible = "gpio-keys"; + }; +}; + +&am33xx_pinmux { + pinctrl-names = "default"; + + i2c0_pins: pinmux_i2c0_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */ + AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */ + >; + }; + + push_button_pins: pinmux_push_button { + pinctrl-single,pins = < + AM33XX_IOPAD(0x8e4, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_hsync.gpio2_23 */ + >; + }; + + uart0_pins: pinmux_uart0_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ + AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ + >; + }; + + davinci_mdio_default: davinci_mdio_default { + pinctrl-single,pins = < + /* MDIO */ + AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ + AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + >; + }; + + mmc1_pins_default: pinmux_mmc1_pins { + pinctrl-single,pins = < + /* eMMC */ + AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad12.mmc1_dat0 */ + AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad13.mmc1_dat1 */ + AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad14.mmc1_dat2 */ + AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad15.mmc1_dat3 */ + AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad8.mmc1_dat4 */ + AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad9.mmc1_dat5 */ + AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad10.mmc1_dat6 */ + AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad11.mmc1_dat7 */ + AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */ + AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */ + >; + }; + + spi0_pins: pinmux_spi0 { + pinctrl-single,pins = < + AM33XX_IOPAD(0x950, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_sclk.spi0_sclk */ + AM33XX_IOPAD(0x95c, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_cs0.spi0_cs0 */ + AM33XX_IOPAD(0x954, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d0.spi0_d0 */ + AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d1.spi0_d1 */ + >; + }; +}; + +&uart0 { + /* Console */ + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + + status = "okay"; + clock-frequency = <400000>; + + eeprom: eeprom@50 { + compatible = "atmel,24c16"; + pagesize = <16>; + reg = <0x50>; + }; + + rtc_wdt: rtc_wdt@68 { + compatible = "dallas,ds1374"; + reg = <0x68>; + }; +}; + +&usb { + status = "okay"; +}; + +&usb_ctrl_mod { + status = "okay"; +}; + +&usb0_phy { + status = "okay"; +}; + +&usb0 { + status = "okay"; + dr_mode = "host"; +}; + +&cppi41dma { + status = "okay"; +}; + +/* Power */ +&vbat { + regulator-name = "vbat"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; +}; + +&mac { + pinctrl-names = "default"; + pinctrl-0 = <&cpsw_default>; + status = "okay"; +}; + +&davinci_mdio { + pinctrl-names = "default"; + pinctrl-0 = <&davinci_mdio_default>; + status = "okay"; +}; + +&cpsw_emac0 { + status = "okay"; +}; + +&cpsw_emac1 { + status = "okay"; +}; + +&phy_sel { + reg= <0x44e10650 0xf5>; + rmii-clock-ext; +}; + +&sham { + status = "okay"; +}; + +&aes { + status = "okay"; +}; + +&gpio0 { + ti,no-reset-on-init; +}; + +&mmc2 { + pinctrl-names = "default"; + vmmc-supply = <&vmmcsd_fixed>; + bus-width = <8>; + pinctrl-0 = <&mmc1_pins_default>; + ti,non-removable; + status = "okay"; +}; + +&buttons { + pinctrl-names = "default"; + pinctrl-0 = <&push_button_pins>; + #address-cells = <1>; + #size-cells = <0>; + + button@0 { + label = "push_button"; + linux,code = <0x100>; + gpios = <&gpio2 23 GPIO_ACTIVE_LOW>; + }; +}; + +/* SPI Busses */ +&spi0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins>; + + m25p80@0 { + compatible = "mx25l6405d"; + spi-max-frequency = <40000000>; + + reg = <0>; + spi-cpol; + spi-cpha; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + /* reg : The partition's offset and size within the mtd bank. */ + partitions@0 { + label = "MLO"; + reg = <0x0 0x80000>; + }; + + partitions@1 { + label = "U-Boot"; + reg = <0x80000 0x100000>; + }; + + partitions@2 { + label = "U-Boot Env"; + reg = <0x180000 0x40000>; + }; + }; + }; +}; + +&spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&spi1_pins>; + + tpm_spi_tis@0 { + compatible = "tcg,tpm_tis-spi"; + reg = <0>; + spi-max-frequency = <500000>; + }; +}; diff --git a/dts/src/arm/am335x-moxa-uc-2101.dts b/dts/src/arm/am335x-moxa-uc-2101.dts new file mode 100644 index 0000000000..48aee6de4c --- /dev/null +++ b/dts/src/arm/am335x-moxa-uc-2101.dts @@ -0,0 +1,69 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2018 MOXA Inc. - https://www.moxa.com/ + * + * Authors: SZ Lin (林上智) <sz.lin@moxa.com> + * Wes Huang (黃淵河) <wes.huang@moxa.com> + * Fero JD Zhou (周俊達) <FeroJD.Zhou@moxa.com> + */ + +/dts-v1/; + +#include "am335x-moxa-uc-2100-common.dtsi" + +/ { + model = "Moxa UC-2101"; + compatible = "moxa,uc-2101", "ti,am33xx"; + + leds { + compatible = "gpio-leds"; + led1 { + label = "UC2100:GREEN:USER"; + gpios = <&gpio3 10 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; +}; + +&am33xx_pinmux { + pinctrl-names = "default"; + + cpsw_default: cpsw_default { + pinctrl-single,pins = < + /* Slave 1 */ + AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_crs.rmii1_crs_dv */ + AM33XX_IOPAD(0x910, PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxerr.rmii1_rxerr */ + AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txen.rmii1_txen */ + AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd1.rmii1_txd1 */ + AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd0.rmii1_txd0 */ + AM33XX_IOPAD(0x93c, PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxd1.rmii1_rxd1 */ + AM33XX_IOPAD(0x940, PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxd0.rmii1_rxd0 */ + AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mii1_refclk.rmii1_refclk */ + >; + }; + + spi1_pins: pinmux_spi1 { + pinctrl-single,pins = < + AM33XX_IOPAD(0x964, PIN_INPUT_PULLUP | MUX_MODE4) /* ecap0_in_pwm0_out.spi1_sclk */ + AM33XX_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE4) /* uart1_ctsn.spi1_cs0 */ + AM33XX_IOPAD(0x968, PIN_INPUT_PULLUP | MUX_MODE4) /* uart0_ctsn.spi1_d0 */ + AM33XX_IOPAD(0x96c, PIN_INPUT_PULLUP | MUX_MODE4) /* uart0_rtsn.spi1_d1 */ + >; + }; +}; + +&davinci_mdio { + phy0: ethernet-phy@4 { + reg = <4>; + }; +}; + +&cpsw_emac0 { + status = "okay"; + phy-handle = <&phy0>; + phy-mode = "rmii"; +}; + +&cpsw_emac1 { + status = "disabled"; +}; diff --git a/dts/src/arm/am335x-moxa-uc-8100-me-t.dts b/dts/src/arm/am335x-moxa-uc-8100-me-t.dts index f82233cd18..5a58efc0c8 100644 --- a/dts/src/arm/am335x-moxa-uc-8100-me-t.dts +++ b/dts/src/arm/am335x-moxa-uc-8100-me-t.dts @@ -422,18 +422,26 @@ pinctrl-names = "default"; pinctrl-0 = <&davinci_mdio_default>; status = "okay"; + + ethphy0: ethernet-phy@4 { + reg = <4>; + }; + + ethphy1: ethernet-phy@5 { + reg = <5>; + }; }; &cpsw_emac0 { status = "okay"; - phy_id = <&davinci_mdio>, <4>; + phy-handle = <ðphy0>; phy-mode = "rmii"; dual_emac_res_vlan = <1>; }; &cpsw_emac1 { status = "okay"; - phy_id = <&davinci_mdio>, <5>; + phy-handle = <ðphy1>; phy-mode = "rmii"; dual_emac_res_vlan = <2>; }; diff --git a/dts/src/arm/am335x-nano.dts b/dts/src/arm/am335x-nano.dts index 946d7069f4..9c9143ed40 100644 --- a/dts/src/arm/am335x-nano.dts +++ b/dts/src/arm/am335x-nano.dts @@ -380,16 +380,24 @@ &davinci_mdio { status = "okay"; + + ethphy0: ethernet-phy@0 { + reg = <0>; + }; + + ethphy1: ethernet-phy@1 { + reg = <1>; + }; }; &cpsw_emac0 { - phy_id = <&davinci_mdio>, <0>; + phy-handle = <ðphy0>; phy-mode = "mii"; dual_emac_res_vlan = <1>; }; &cpsw_emac1 { - phy_id = <&davinci_mdio>, <1>; + phy-handle = <ðphy1>; phy-mode = "mii"; dual_emac_res_vlan = <2>; }; diff --git a/dts/src/arm/am335x-osd3358-sm-red.dts b/dts/src/arm/am335x-osd3358-sm-red.dts index 4d969013f9..85cd1d0a73 100644 --- a/dts/src/arm/am335x-osd3358-sm-red.dts +++ b/dts/src/arm/am335x-osd3358-sm-red.dts @@ -161,7 +161,7 @@ invensense,key = [4e cc 7e eb f6 1e 35 22 00 34 0d 65 32 e9 94 89];*/ }; - bmp280: pressure@78 { + bmp280: pressure@76 { compatible = "bosch,bmp280"; reg = <0x76>; }; @@ -424,7 +424,7 @@ }; &cpsw_emac0 { - phy_id = <&davinci_mdio>, <4>; + phy-handle = <ðphy0>; phy-mode = "rgmii-txid"; }; @@ -441,6 +441,10 @@ pinctrl-0 = <&davinci_mdio_default>; pinctrl-1 = <&davinci_mdio_sleep>; status = "okay"; + + ethphy0: ethernet-phy@4 { + reg = <4>; + }; }; &mmc1 { diff --git a/dts/src/arm/am335x-pdu001.dts b/dts/src/arm/am335x-pdu001.dts index 1ad530a39a..6dd9d487aa 100644 --- a/dts/src/arm/am335x-pdu001.dts +++ b/dts/src/arm/am335x-pdu001.dts @@ -373,7 +373,7 @@ ti,pindir-d0-out-d1-in; status = "okay"; - cfaf240320a032t { + display-controller@0 { compatible = "orisetech,otm3225a"; reg = <0>; spi-max-frequency = <1000000>; @@ -533,16 +533,24 @@ pinctrl-names = "default"; pinctrl-0 = <&davinci_mdio_default>; status = "okay"; + + ethphy0: ethernet-phy@0 { + reg = <0>; + }; + + ethphy1: ethernet-phy@1 { + reg = <1>; + }; }; &cpsw_emac0 { - phy_id = <&davinci_mdio>, <0>; + phy-handle = <ðphy0>; phy-mode = "mii"; dual_emac_res_vlan = <1>; }; &cpsw_emac1 { - phy_id = <&davinci_mdio>, <1>; + phy-handle = <ðphy1>; phy-mode = "mii"; dual_emac_res_vlan = <2>; }; diff --git a/dts/src/arm/am335x-pepper.dts b/dts/src/arm/am335x-pepper.dts index 9fb7426070..6be79b8349 100644 --- a/dts/src/arm/am335x-pepper.dts +++ b/dts/src/arm/am335x-pepper.dts @@ -265,13 +265,13 @@ /* Ethernet */ &cpsw_emac0 { status = "okay"; - phy_id = <&davinci_mdio>, <0>; + phy-handle = <ðphy0>; phy-mode = "rgmii"; }; &cpsw_emac1 { status = "okay"; - phy_id = <&davinci_mdio>, <1>; + phy-handle = <ðphy1>; phy-mode = "rgmii"; }; @@ -279,6 +279,14 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&mdio_pins>; + + ethphy0: ethernet-phy@0 { + reg = <0>; + }; + + ethphy1: ethernet-phy@1 { + reg = <1>; + }; }; &mac { diff --git a/dts/src/arm/am335x-sancloud-bbe.dts b/dts/src/arm/am335x-sancloud-bbe.dts index 7b8e7417a1..35527fdf56 100644 --- a/dts/src/arm/am335x-sancloud-bbe.dts +++ b/dts/src/arm/am335x-sancloud-bbe.dts @@ -103,10 +103,14 @@ pinctrl-0 = <&davinci_mdio_default>; pinctrl-1 = <&davinci_mdio_sleep>; status = "okay"; + + ethphy0: ethernet-phy@0 { + reg = <0>; + }; }; &cpsw_emac0 { - phy_id = <&davinci_mdio>, <0>; + phy-handle = <ðphy0>; phy-mode = "rgmii-txid"; }; diff --git a/dts/src/arm/am335x-shc.dts b/dts/src/arm/am335x-shc.dts index 4f6a286ea2..1d925ed2b1 100644 --- a/dts/src/arm/am335x-shc.dts +++ b/dts/src/arm/am335x-shc.dts @@ -206,7 +206,6 @@ status = "okay"; slaves = <1>; cpsw_emac0: slave@4a100200 { - phy_id = <&davinci_mdio>, <0>; phy-mode = "mii"; phy-handle = <ðernetphy0>; }; diff --git a/dts/src/arm/am3517-evm-ui.dtsi b/dts/src/arm/am3517-evm-ui.dtsi new file mode 100644 index 0000000000..e841918c1c --- /dev/null +++ b/dts/src/arm/am3517-evm-ui.dtsi @@ -0,0 +1,220 @@ +/* + * Copyright (C) 2018 Logic PD, Inc - http://www.logicpd.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <dt-bindings/input/input.h> + +/ { + codec1 { + compatible = "simple-audio-card"; + simple-audio-card,name = "tlv320aic23-hifi"; + + simple-audio-card,widgets = + "Microphone", "Mic In", + "Line", "Line In", + "Line", "Line Out"; + + simple-audio-card,routing = + "Line Out", "LOUT", + "Line Out", "ROUT", + "LLINEIN", "Line In", + "RLINEIN", "Line In", + "MICIN", "Mic In"; + + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&sound_master>; + simple-audio-card,frame-master = <&sound_master>; + + simple-audio-card,cpu { + sound-dai = <&mcbsp1>; + }; + + sound_master: simple-audio-card,codec { + sound-dai = <&tlv320aic23_1>; + system-clock-frequency = <12000000>; + }; + }; + + codec2 { + compatible = "simple-audio-card"; + simple-audio-card,name = "tlv320aic23-hifi"; + + simple-audio-card,widgets = + "Microphone", "Mic In", + "Line", "Line In", + "Line", "Line Out"; + + simple-audio-card,routing = + "Line Out", "LOUT", + "Line Out", "ROUT", + "LLINEIN", "Line In", + "RLINEIN", "Line In", + "MICIN", "Mic In"; + + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&sound_master2>; + simple-audio-card,frame-master = <&sound_master2>; + + simple-audio-card,cpu { + sound-dai = <&mcbsp2>; + }; + + sound_master2: simple-audio-card,codec { + sound-dai = <&tlv320aic23_2>; + system-clock-frequency = <12000000>; + }; + }; + + expander-keys { + compatible = "gpio-keys-polled"; + poll-interval = <100>; + + record { + label = "Record"; + /* linux,code = <BTN_0>; */ + gpios = <&tca6416_2 15 GPIO_ACTIVE_LOW>; + }; + + play { + label = "Play"; + linux,code = <KEY_PLAY>; + gpios = <&tca6416_2 14 GPIO_ACTIVE_LOW>; + }; + + Stop { + label = "Stop"; + linux,code = <KEY_STOP>; + gpios = <&tca6416_2 13 GPIO_ACTIVE_LOW>; + }; + + fwd { + label = "FWD"; + linux,code = <KEY_FASTFORWARD>; + gpios = <&tca6416_2 12 GPIO_ACTIVE_LOW>; + }; + + rwd { + label = "RWD"; + linux,code = <KEY_REWIND>; + gpios = <&tca6416_2 11 GPIO_ACTIVE_LOW>; + }; + + shift { + label = "Shift"; + linux,code = <KEY_LEFTSHIFT>; + gpios = <&tca6416_2 10 GPIO_ACTIVE_LOW>; + }; + + Mode { + label = "Mode"; + linux,code = <BTN_MODE>; + gpios = <&tca6416_2 9 GPIO_ACTIVE_LOW>; + }; + + Menu { + label = "Menu"; + linux,code = <KEY_MENU>; + gpios = <&tca6416_2 8 GPIO_ACTIVE_LOW>; + }; + + Up { + label = "Up"; + linux,code = <KEY_UP>; + gpios = <&tca6416_2 7 GPIO_ACTIVE_LOW>; + }; + + Down { + label = "Down"; + linux,code = <KEY_DOWN>; + gpios = <&tca6416_2 6 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&i2c2 { + /* Audio codecs */ + tlv320aic23_1: codec@1a { + compatible = "ti,tlv320aic23"; + reg = <0x1a>; + #sound-dai-cells= <0>; + status = "okay"; + }; + + tlv320aic23_2: codec@1b { + compatible = "ti,tlv320aic23"; + reg = <0x1b>; + #sound-dai-cells= <0>; + status = "okay"; + }; +}; + +&i2c3 { + /* Audio codecs */ + tlv320aic23_3: codec@1a { + compatible = "ti,tlv320aic23"; + reg = <0x1a>; + #sound-dai-cells= <0>; + status = "okay"; + }; + + /* GPIO Expanders */ + tca6416_2: gpio@20 { + compatible = "ti,tca6416"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + vcc-supply = <&vdd_io_reg>; + }; + + tca6416_3: gpio@21 { + compatible = "ti,tca6416"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + vcc-supply = <&vdd_io_reg>; + }; + + /* TVP5146 Analog Video decoder input */ + tvp5146@5c { + compatible = "ti,tvp5146m2"; + reg = <0x5c>; + }; +}; + +&mcbsp1 { + status = "ok"; + #sound-dai-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&mcbsp1_pins>; +}; + +&mcbsp2 { + status = "ok"; + #sound-dai-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&mcbsp2_pins>; +}; + +&omap3_pmx_core { + mcbsp1_pins: pinmux_mcbsp1_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2190, PIN_OUTPUT | MUX_MODE0) /* mcbsp1_dx.mcbsp1_dx */ + OMAP3_CORE1_IOPAD(0x2192, PIN_INPUT | MUX_MODE0) /* mcbsp1_dx.mcbsp1_dr */ + OMAP3_CORE1_IOPAD(0x2196, PIN_INPUT | MUX_MODE0) /* mcbsp_clks.mcbsp1_fsx */ + OMAP3_CORE1_IOPAD(0x2198, PIN_INPUT | MUX_MODE0) /* mcbsp1_clkx.mcbsp1_clkx */ + >; + }; + + mcbsp2_pins: pinmux_mcbsp2_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0) /* mcbsp2_fsx.mcbsp2_fsx */ + OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0) /* mcbsp2_clkx.mcbsp2_clkx */ + OMAP3_CORE1_IOPAD(0x2140, PIN_INPUT | MUX_MODE0) /* mcbsp2_dr.mcbsp2.dr */ + OMAP3_CORE1_IOPAD(0x2142, PIN_OUTPUT | MUX_MODE0) /* mcbsp2_dx.mcbsp2_dx */ + >; + }; +}; diff --git a/dts/src/arm/am3517-evm.dts b/dts/src/arm/am3517-evm.dts index 1d158cfda1..d4d33cd7ad 100644 --- a/dts/src/arm/am3517-evm.dts +++ b/dts/src/arm/am3517-evm.dts @@ -9,6 +9,7 @@ #include "am3517.dtsi" #include "am3517-som.dtsi" +#include "am3517-evm-ui.dtsi" #include <dt-bindings/input/input.h> / { diff --git a/dts/src/arm/am4372.dtsi b/dts/src/arm/am4372.dtsi index d4b7c59eec..a68e89dae7 100644 --- a/dts/src/arm/am4372.dtsi +++ b/dts/src/arm/am4372.dtsi @@ -1101,7 +1101,7 @@ }; }; - qspi: qspi@47900000 { + qspi: spi@47900000 { compatible = "ti,am4372-qspi"; reg = <0x47900000 0x100>, <0x30000000 0x4000000>; diff --git a/dts/src/arm/am437x-cm-t43.dts b/dts/src/arm/am437x-cm-t43.dts index bff5abe69b..4fcf647815 100644 --- a/dts/src/arm/am437x-cm-t43.dts +++ b/dts/src/arm/am437x-cm-t43.dts @@ -339,16 +339,24 @@ pinctrl-names = "default"; pinctrl-0 = <&davinci_mdio_default>; status = "okay"; + + ethphy0: ethernet-phy@0 { + reg = <0>; + }; + + ethphy1: ethernet-phy@1 { + reg = <1>; + }; }; &cpsw_emac0 { - phy_id = <&davinci_mdio>, <0>; + phy-handle = <ðphy0>; phy-mode = "rgmii-txid"; dual_emac_res_vlan = <1>; }; &cpsw_emac1 { - phy_id = <&davinci_mdio>, <1>; + phy-handle = <ðphy1>; phy-mode = "rgmii-txid"; dual_emac_res_vlan = <2>; }; diff --git a/dts/src/arm/am437x-gp-evm.dts b/dts/src/arm/am437x-gp-evm.dts index 5b97c20c5e..601bf4daae 100644 --- a/dts/src/arm/am437x-gp-evm.dts +++ b/dts/src/arm/am437x-gp-evm.dts @@ -831,10 +831,14 @@ pinctrl-0 = <&davinci_mdio_default>; pinctrl-1 = <&davinci_mdio_sleep>; status = "okay"; + + ethphy0: ethernet-phy@0 { + reg = <0>; + }; }; &cpsw_emac0 { - phy_id = <&davinci_mdio>, <0>; + phy-handle = <ðphy0>; phy-mode = "rgmii"; }; diff --git a/dts/src/arm/am437x-idk-evm.dts b/dts/src/arm/am437x-idk-evm.dts index 20132477a8..bb28540947 100644 --- a/dts/src/arm/am437x-idk-evm.dts +++ b/dts/src/arm/am437x-idk-evm.dts @@ -499,10 +499,14 @@ pinctrl-0 = <&davinci_mdio_default>; pinctrl-1 = <&davinci_mdio_sleep>; status = "okay"; + + ethphy0: ethernet-phy@0 { + reg = <0>; + }; }; &cpsw_emac0 { - phy_id = <&davinci_mdio>, <0>; + phy-handle = <ðphy0>; phy-mode = "rgmii"; }; diff --git a/dts/src/arm/am437x-sk-evm.dts b/dts/src/arm/am437x-sk-evm.dts index d4be3fd0b6..088cba09d3 100644 --- a/dts/src/arm/am437x-sk-evm.dts +++ b/dts/src/arm/am437x-sk-evm.dts @@ -799,16 +799,24 @@ pinctrl-0 = <&davinci_mdio_default>; pinctrl-1 = <&davinci_mdio_sleep>; status = "okay"; + + ethphy0: ethernet-phy@4 { + reg = <4>; + }; + + ethphy1: ethernet-phy@5 { + reg = <5>; + }; }; &cpsw_emac0 { - phy_id = <&davinci_mdio>, <4>; + phy-handle = <ðphy0>; phy-mode = "rgmii"; dual_emac_res_vlan = <1>; }; &cpsw_emac1 { - phy_id = <&davinci_mdio>, <5>; + phy-handle = <ðphy1>; phy-mode = "rgmii"; dual_emac_res_vlan = <2>; }; diff --git a/dts/src/arm/am43x-epos-evm.dts b/dts/src/arm/am43x-epos-evm.dts index 6502d33976..4ea753b3ee 100644 --- a/dts/src/arm/am43x-epos-evm.dts +++ b/dts/src/arm/am43x-epos-evm.dts @@ -575,10 +575,14 @@ pinctrl-0 = <&davinci_mdio_default>; pinctrl-1 = <&davinci_mdio_sleep>; status = "okay"; + + ethphy0: ethernet-phy@16 { + reg = <16>; + }; }; &cpsw_emac0 { - phy_id = <&davinci_mdio>, <16>; + phy-handle = <ðphy0>; phy-mode = "rmii"; }; diff --git a/dts/src/arm/am571x-idk.dts b/dts/src/arm/am571x-idk.dts index d9a2049a1e..6432309b39 100644 --- a/dts/src/arm/am571x-idk.dts +++ b/dts/src/arm/am571x-idk.dts @@ -64,6 +64,82 @@ linux,default-trigger = "mmc0"; }; }; + + idk-leds { + status = "disabled"; + compatible = "gpio-leds"; + red0-led { + label = "idk:red0"; + gpios = <&gpio6 19 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + green0-led { + label = "idk:green0"; + gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + blue0-led { + label = "idk:blue0"; + gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + red1-led { + label = "idk:red1"; + gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + green1-led { + label = "idk:green1"; + gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + blue1-led { + label = "idk:blue1"; + gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + red2-led { + label = "idk:red2"; + gpios = <&gpio7 9 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + green2-led { + label = "idk:green2"; + gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + blue2-led { + label = "idk:blue2"; + gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + red3-led { + label = "idk:red3"; + gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + green3-led { + label = "idk:green3"; + gpios = <&gpio7 25 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + blue3-led { + label = "idk:blue3"; + gpios = <&gpio7 24 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; }; &extcon_usb2 { @@ -71,6 +147,10 @@ vbus-gpio = <&gpio7 22 GPIO_ACTIVE_HIGH>; }; +&sn65hvs882 { + load-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>; +}; + &mailbox5 { status = "okay"; mbox_ipu1_ipc3x: mbox_ipu1_ipc3x { @@ -114,7 +194,3 @@ pinctrl-1 = <&mmc2_pins_hs>; pinctrl-2 = <&mmc2_pins_ddr_rev20 &mmc2_iodelay_ddr_conf>; }; - -&cpu0 { - vdd-supply = <&smps12_reg>; -}; diff --git a/dts/src/arm/am572x-idk-common.dtsi b/dts/src/arm/am572x-idk-common.dtsi index 784639ddf4..a064f13b38 100644 --- a/dts/src/arm/am572x-idk-common.dtsi +++ b/dts/src/arm/am572x-idk-common.dtsi @@ -55,6 +55,82 @@ linux,default-trigger = "mmc0"; }; }; + + idk-leds { + status = "disabled"; + compatible = "gpio-leds"; + red0-led { + label = "idk:red0"; + gpios = <&gpio6 19 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + green0-led { + label = "idk:green0"; + gpios = <&gpio3 9 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + blue0-led { + label = "idk:blue0"; + gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + red1-led { + label = "idk:red1"; + gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + green1-led { + label = "idk:green1"; + gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + blue1-led { + label = "idk:blue1"; + gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + red2-led { + label = "idk:red2"; + gpios = <&gpio7 9 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + green2-led { + label = "idk:green2"; + gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + blue2-led { + label = "idk:blue2"; + gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + red3-led { + label = "idk:red3"; + gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + green3-led { + label = "idk:green3"; + gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + blue3-led { + label = "idk:blue3"; + gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; }; &extcon_usb2 { diff --git a/dts/src/arm/am572x-idk.dts b/dts/src/arm/am572x-idk.dts index 3ef9111d0e..b2fb6e097b 100644 --- a/dts/src/arm/am572x-idk.dts +++ b/dts/src/arm/am572x-idk.dts @@ -36,7 +36,3 @@ pinctrl-1 = <&mmc2_pins_hs>; pinctrl-2 = <&mmc2_pins_ddr_rev20>; }; - -&cpu0 { - vdd-supply = <&smps12_reg>; -}; diff --git a/dts/src/arm/am57xx-cl-som-am57x.dts b/dts/src/arm/am57xx-cl-som-am57x.dts index 203266f884..4748ce8747 100644 --- a/dts/src/arm/am57xx-cl-som-am57x.dts +++ b/dts/src/arm/am57xx-cl-som-am57x.dts @@ -518,7 +518,7 @@ }; /* touch controller */ - ads7846@0 { + touchscreen@1 { pinctrl-names = "default"; pinctrl-0 = <&ads7846_pins>; @@ -558,13 +558,13 @@ }; &cpsw_emac0 { - phy_id = <&davinci_mdio>, <0>; + phy-handle = <ðphy0>; phy-mode = "rgmii-txid"; dual_emac_res_vlan = <0>; }; &cpsw_emac1 { - phy_id = <&davinci_mdio>, <1>; + phy-handle = <ðphy1>; phy-mode = "rgmii-txid"; dual_emac_res_vlan = <1>; }; @@ -573,6 +573,14 @@ pinctrl-names = "default", "sleep"; pinctrl-0 = <&davinci_mdio_pins_default>; pinctrl-1 = <&davinci_mdio_pins_sleep>; + + ethphy0: ethernet-phy@0 { + reg = <0>; + }; + + ethphy1: ethernet-phy@1 { + reg = <1>; + }; }; &usb2_phy1 { diff --git a/dts/src/arm/am57xx-idk-common.dtsi b/dts/src/arm/am57xx-idk-common.dtsi index c9063ffca5..f7bd264589 100644 --- a/dts/src/arm/am57xx-idk-common.dtsi +++ b/dts/src/arm/am57xx-idk-common.dtsi @@ -372,17 +372,27 @@ }; &cpsw_emac0 { - phy_id = <&davinci_mdio>, <0>; + phy-handle = <ðphy0>; phy-mode = "rgmii"; dual_emac_res_vlan = <1>; }; &cpsw_emac1 { - phy_id = <&davinci_mdio>, <1>; + phy-handle = <ðphy1>; phy-mode = "rgmii"; dual_emac_res_vlan = <2>; }; +&davinci_mdio { + ethphy0: ethernet-phy@0 { + reg = <0>; + }; + + ethphy1: ethernet-phy@1 { + reg = <1>; + }; +}; + &usb2_phy1 { phy-supply = <&ldousb_reg>; }; @@ -478,3 +488,7 @@ }; }; }; + +&cpu0 { + vdd-supply = <&smps12_reg>; +}; diff --git a/dts/src/arm/arm-realview-eb.dtsi b/dts/src/arm/arm-realview-eb.dtsi index a917cf8825..0e4c7c4c8c 100644 --- a/dts/src/arm/arm-realview-eb.dtsi +++ b/dts/src/arm/arm-realview-eb.dtsi @@ -371,7 +371,7 @@ clock-names = "uartclk", "apb_pclk"; }; - ssp: ssp@1000d000 { + ssp: spi@1000d000 { compatible = "arm,pl022", "arm,primecell"; reg = <0x1000d000 0x1000>; clocks = <&sspclk>, <&pclk>; diff --git a/dts/src/arm/arm-realview-pb1176.dts b/dts/src/arm/arm-realview-pb1176.dts index f935b72d3d..f2a1d25eb6 100644 --- a/dts/src/arm/arm-realview-pb1176.dts +++ b/dts/src/arm/arm-realview-pb1176.dts @@ -380,7 +380,7 @@ clock-names = "apb_pclk"; }; - pb1176_ssp: ssp@1010b000 { + pb1176_ssp: spi@1010b000 { compatible = "arm,pl022", "arm,primecell"; reg = <0x1010b000 0x1000>; interrupt-parent = <&intc_dc1176>; diff --git a/dts/src/arm/arm-realview-pb11mp.dts b/dts/src/arm/arm-realview-pb11mp.dts index 36203288de..7f9cbdf33a 100644 --- a/dts/src/arm/arm-realview-pb11mp.dts +++ b/dts/src/arm/arm-realview-pb11mp.dts @@ -523,7 +523,7 @@ clock-names = "uartclk", "apb_pclk"; }; - ssp@1000d000 { + spi@1000d000 { compatible = "arm,pl022", "arm,primecell"; reg = <0x1000d000 0x1000>; interrupt-parent = <&intc_pb11mp>; diff --git a/dts/src/arm/arm-realview-pbx.dtsi b/dts/src/arm/arm-realview-pbx.dtsi index 10868ba327..a5676697ff 100644 --- a/dts/src/arm/arm-realview-pbx.dtsi +++ b/dts/src/arm/arm-realview-pbx.dtsi @@ -362,7 +362,7 @@ clock-names = "uartclk", "apb_pclk"; }; - ssp: ssp@1000d000 { + ssp: spi@1000d000 { compatible = "arm,pl022", "arm,primecell"; reg = <0x1000d000 0x1000>; clocks = <&sspclk>, <&pclk>; diff --git a/dts/src/arm/armada-385-db-88f6820-amc.dts b/dts/src/arm/armada-385-db-88f6820-amc.dts new file mode 100644 index 0000000000..7881df3b28 --- /dev/null +++ b/dts/src/arm/armada-385-db-88f6820-amc.dts @@ -0,0 +1,155 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Device Tree file for Marvell Armada 385 AMC board + * (DB-88F6820-AMC) + * + * Copyright (C) 2017 Allied Telesis Labs + */ + +/dts-v1/; +#include "armada-385.dtsi" + +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Marvell Armada 385 AMC"; + compatible = "marvell,a385-db-amc", "marvell,armada385", "marvell,armada380"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + aliases { + ethernet0 = ð0; + ethernet1 = ð1; + spi1 = &spi1; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x80000000>; /* 2GB */ + }; + + soc { + ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 + MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>; + }; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + status = "okay"; +}; + +&uart0 { + /* + * Exported on the micro USB connector CON3 + * through an FTDI + */ + + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + status = "okay"; +}; + + +ð0 { + pinctrl-names = "default"; + /* + * The Reference Clock 0 is used to provide a + * clock to the PHY + */ + pinctrl-0 = <&ge0_rgmii_pins>, <&ref_clk0_pins>; + status = "okay"; + phy = <&phy0>; + phy-mode = "rgmii-id"; +}; + +ð2 { + status = "okay"; + phy = <&phy1>; + phy-mode = "sgmii"; +}; + +&usb0 { + status = "okay"; +}; + + + +&mdio { + pinctrl-names = "default"; + pinctrl-0 = <&mdio_pins>; + + phy0: ethernet-phy@1 { + reg = <1>; + }; + + phy1: ethernet-phy@0 { + reg = <0>; + }; +}; + +&nand_controller { + status = "okay"; + + nand@0 { + reg = <0>; + label = "pxa3xx_nand-0"; + nand-rb = <0>; + nand-on-flash-bbt; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + reg = <0x00000000 0x40000000>; + label = "user"; + }; + }; + }; +}; + +&pciec { + status = "okay"; +}; + +&pcie1 { + /* Port 0, Lane 0 */ + status = "okay"; +}; + +&spi1 { + pinctrl-names = "default"; + pinctrl-0 = <&spi1_pins>; + status = "okay"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <50000000>; + m25p,fast-read; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + reg = <0x00000000 0x00100000>; + label = "u-boot"; + }; + partition@100000 { + reg = <0x00100000 0x00040000>; + label = "u-boot-env"; + }; + }; + }; +}; + +&refclk { + clock-frequency = <20000000>; +}; diff --git a/dts/src/arm/armada-388-clearfog.dtsi b/dts/src/arm/armada-388-clearfog.dtsi index 7c6ad2afb0..1b0d0680c8 100644 --- a/dts/src/arm/armada-388-clearfog.dtsi +++ b/dts/src/arm/armada-388-clearfog.dtsi @@ -48,7 +48,7 @@ &clearfog_sdhci_cd_pins>; pinctrl-names = "default"; status = "okay"; - vmmc = <®_3p3v>; + vmmc-supply = <®_3p3v>; wp-inverted; }; diff --git a/dts/src/arm/armada-xp-98dx3236.dtsi b/dts/src/arm/armada-xp-98dx3236.dtsi index 8d708cc224..59753470cd 100644 --- a/dts/src/arm/armada-xp-98dx3236.dtsi +++ b/dts/src/arm/armada-xp-98dx3236.dtsi @@ -189,7 +189,7 @@ }; }; - nand: nand@d0000 { + nand_controller: nand-controller@d0000 { clocks = <&dfx_coredivclk 0>; }; @@ -243,7 +243,7 @@ ranges = <0 MBUS_ID(0x03, 0x00) 0 0x100000>; pp0: packet-processor@0 { - compatible = "marvell,prestera-98dx3236"; + compatible = "marvell,prestera-98dx3236", "marvell,prestera"; reg = <0 0x4000000>; interrupts = <33>, <34>, <35>; dfx = <&dfx>; diff --git a/dts/src/arm/armada-xp-98dx3336.dtsi b/dts/src/arm/armada-xp-98dx3336.dtsi index 2f5fc67dd6..1d9d8a8ea6 100644 --- a/dts/src/arm/armada-xp-98dx3336.dtsi +++ b/dts/src/arm/armada-xp-98dx3336.dtsi @@ -35,5 +35,5 @@ }; &pp0 { - compatible = "marvell,prestera-98dx3336"; + compatible = "marvell,prestera-98dx3336", "marvell,prestera"; }; diff --git a/dts/src/arm/armada-xp-98dx4251.dtsi b/dts/src/arm/armada-xp-98dx4251.dtsi index 7a9e883988..48ffdc72bf 100644 --- a/dts/src/arm/armada-xp-98dx4251.dtsi +++ b/dts/src/arm/armada-xp-98dx4251.dtsi @@ -49,6 +49,6 @@ }; &pp0 { - compatible = "marvell,prestera-98dx4251"; + compatible = "marvell,prestera-98dx4251", "marvell,prestera"; interrupts = <33>, <34>, <35>, <36>; }; diff --git a/dts/src/arm/armada-xp-db-dxbc2.dts b/dts/src/arm/armada-xp-db-dxbc2.dts index f42fc6118b..8a3aa616bb 100644 --- a/dts/src/arm/armada-xp-db-dxbc2.dts +++ b/dts/src/arm/armada-xp-db-dxbc2.dts @@ -68,14 +68,18 @@ status = "okay"; }; -&nand { +&nand_controller { status = "okay"; - label = "pxa3xx_nand-0"; - num-cs = <1>; - marvell,nand-keep-config; - nand-on-flash-bbt; - nand-ecc-strength = <4>; - nand-ecc-step-size = <512>; + + nand@0 { + reg = <0>; + label = "pxa3xx_nand-0"; + nand-rb = <0>; + marvell,nand-keep-config; + nand-on-flash-bbt; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + }; }; &sdio { diff --git a/dts/src/arm/armada-xp-db-xc3-24g4xg.dts b/dts/src/arm/armada-xp-db-xc3-24g4xg.dts index 8432f517e3..df04805061 100644 --- a/dts/src/arm/armada-xp-db-xc3-24g4xg.dts +++ b/dts/src/arm/armada-xp-db-xc3-24g4xg.dts @@ -67,14 +67,18 @@ status = "okay"; }; -&nand { +&nand_controller { status = "okay"; - label = "pxa3xx_nand-0"; - num-cs = <1>; - marvell,nand-keep-config; - nand-on-flash-bbt; - nand-ecc-strength = <4>; - nand-ecc-step-size = <512>; + + nand@0 { + reg = <0>; + label = "pxa3xx_nand-0"; + nand-rb = <0>; + marvell,nand-keep-config; + nand-on-flash-bbt; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + }; }; &spi0 { diff --git a/dts/src/arm/aspeed-bmc-arm-stardragon4800-rep2.dts b/dts/src/arm/aspeed-bmc-arm-stardragon4800-rep2.dts new file mode 100644 index 0000000000..bdfd8c9f3a --- /dev/null +++ b/dts/src/arm/aspeed-bmc-arm-stardragon4800-rep2.dts @@ -0,0 +1,207 @@ +// SPDX-License-Identifier: GPL-2.0+ +/dts-v1/; + +#include "aspeed-g5.dtsi" +#include <dt-bindings/gpio/aspeed-gpio.h> + +/ { + model = "HXT StarDragon 4800 REP2 AST2520"; + compatible = "hxt,stardragon4800-rep2-bmc", "aspeed,ast2500"; + + chosen { + stdout-path = &uart5; + bootargs = "console=ttyS4,115200 earlyprintk"; + }; + + memory@80000000 { + reg = <0x80000000 0x40000000>; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, + <&adc 4>, <&adc 5>, <&adc 6>, <&adc 8>; + }; + + iio-hwmon-battery { + compatible = "iio-hwmon"; + io-channels = <&adc 7>; + }; + + leds { + compatible = "gpio-leds"; + + system_fault1 { + label = "System_fault1"; + gpios = <&gpio ASPEED_GPIO(I, 3) GPIO_ACTIVE_LOW>; + }; + + system_fault2 { + label = "System_fault2"; + gpios = <&gpio ASPEED_GPIO(I, 2) GPIO_ACTIVE_LOW>; + }; + }; +}; + +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bmc"; +#include "openbmc-flash-layout.dtsi" + }; +}; + +&spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1_default>; + flash@0 { + status = "okay"; + }; +}; + +&spi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi2ck_default + &pinctrl_spi2miso_default + &pinctrl_spi2mosi_default + &pinctrl_spi2cs0_default>; +}; + +&uart3 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd3_default &pinctrl_rxd3_default>; + current-speed = <115200>; +}; + +&uart5 { + status = "okay"; +}; + +&mac0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>; +}; + +&mac1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii2_default>; + use-ncsi; +}; + +&i2c0 { + status = "okay"; +}; + +&i2c1 { + status = "okay"; + + tmp421@1e { + compatible = "ti,tmp421"; + reg = <0x1e>; + }; + tmp421@2a { + compatible = "ti,tmp421"; + reg = <0x2a>; + }; + tmp421@1c { + compatible = "ti,tmp421"; + reg = <0x1c>; + }; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; +}; + +&i2c4 { + status = "okay"; +}; + +&i2c5 { + status = "okay"; +}; + +&i2c6 { + status = "okay"; + + tmp421@1f { + compatible = "ti,tmp421"; + reg = <0x1f>; + }; + nvt210@4c { + compatible = "nvt210"; + reg = <0x4c>; + }; + eeprom@50 { + compatible = "atmel,24c128"; + reg = <0x50>; + pagesize = <128>; + }; +}; + +&i2c7 { + status = "okay"; +}; + +&i2c8 { + status = "okay"; + + pca9641@70 { + compatible = "nxp,pca9641"; + reg = <0x70>; + i2c-arb { + #address-cells = <1>; + #size-cells = <0>; + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + }; + dps650ab@58 { + compatible = "dps650ab"; + reg = <0x58>; + }; + }; + }; +}; + +&i2c9 { + status = "okay"; +}; + +&vuart { + status = "okay"; +}; + +&gfx { + status = "okay"; +}; + +&pinctrl { + aspeed,external-nodes = <&gfx &lhc>; +}; + +&gpio { + pin_gpio_c7 { + gpio-hog; + gpios = <ASPEED_GPIO(C, 7) GPIO_ACTIVE_HIGH>; + output-low; + line-name = "BIOS_SPI_MUX_S"; + }; + pin_gpio_d1 { + gpio-hog; + gpios = <ASPEED_GPIO(D, 1) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "PHY2_RESET_N"; + }; +}; diff --git a/dts/src/arm/aspeed-bmc-facebook-tiogapass.dts b/dts/src/arm/aspeed-bmc-facebook-tiogapass.dts new file mode 100644 index 0000000000..f8e7b71af7 --- /dev/null +++ b/dts/src/arm/aspeed-bmc-facebook-tiogapass.dts @@ -0,0 +1,146 @@ +// SPDX-License-Identifier: GPL-2.0+ +// Copyright (c) 2018 Facebook Inc. +// Author: Vijay Khemka <vijaykhemka@fb.com> +/dts-v1/; + +#include "aspeed-g5.dtsi" +#include <dt-bindings/gpio/aspeed-gpio.h> + +/ { + model = "Facebook TiogaPass BMC"; + compatible = "facebook,tiogapass-bmc", "aspeed,ast2500"; + aliases { + serial0 = &uart1; + serial4 = &uart5; + }; + chosen { + stdout-path = &uart5; + bootargs = "console=ttyS4,115200 earlyprintk"; + }; + + memory@80000000 { + reg = <0x80000000 0x20000000>; + }; +}; + +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + m25p,fast-read; +#include "openbmc-flash-layout.dtsi" + }; +}; + +&spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1_default>; + flash@0 { + status = "okay"; + m25p,fast-read; + label = "pnor"; + }; +}; + +&uart1 { + // Host Console + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd1_default + &pinctrl_rxd1_default>; +}; + +&uart5 { + // BMC Console + status = "okay"; +}; + +&mac0 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii1_default>; + use-ncsi; +}; + +&i2c0 { + status = "okay"; + //Airmax Conn B, CPU0 PIROM, CPU1 PIROM +}; + +&i2c1 { + status = "okay"; + //X24 Riser +}; + +&i2c2 { + status = "okay"; + // Mezz Management SMBus +}; + +&i2c3 { + status = "okay"; + // SMBus to Board ID EEPROM +}; + +&i2c4 { + status = "okay"; + // BMC Debug Header +}; + +&i2c5 { + status = "okay"; + // CPU Voltage regulators +}; + +&i2c6 { + status = "okay"; + tpm@20 { + compatible = "infineon,slb9645tt"; + reg = <0x20>; + }; + tmp421@4e { + compatible = "ti,tmp421"; + reg = <0x4e>; + }; + tmp421@4f { + compatible = "ti,tmp421"; + reg = <0x4f>; + }; + eeprom@54 { + compatible = "atmel,24c64"; + reg = <0x54>; + pagesize = <32>; + }; +}; + +&i2c7 { + status = "okay"; + //HSC, AirMax Conn A +}; + +&i2c8 { + status = "okay"; + //Mezz Sensor SMBus +}; + +&i2c9 { + status = "okay"; + //USB Debug Connector +}; + +&pwm_tacho { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default>; + fan@0 { + reg = <0x00>; + aspeed,fan-tach-ch = /bits/ 8 <0x00>; + }; + + fan@1 { + reg = <0x00>; + aspeed,fan-tach-ch = /bits/ 8 <0x01>; + }; +}; diff --git a/dts/src/arm/aspeed-bmc-quanta-q71l.dts b/dts/src/arm/aspeed-bmc-quanta-q71l.dts index 76aa6ea1f9..385c0f4b69 100644 --- a/dts/src/arm/aspeed-bmc-quanta-q71l.dts +++ b/dts/src/arm/aspeed-bmc-quanta-q71l.dts @@ -7,6 +7,25 @@ model = "Quanta Q71L BMC"; compatible = "quanta,q71l-bmc", "aspeed,ast2400"; + aliases { + i2c14 = &i2c_pcie2; + i2c15 = &i2c_pcie3; + i2c16 = &i2c_pcie6; + i2c17 = &i2c_pcie7; + i2c18 = &i2c_pcie1; + i2c19 = &i2c_pcie4; + i2c20 = &i2c_pcie5; + i2c21 = &i2c_pcie8; + i2c22 = &i2c_pcie9; + i2c23 = &i2c_pcie10; + i2c24 = &i2c_ssd1; + i2c25 = &i2c_ssd2; + i2c26 = &i2c_psu4; + i2c27 = &i2c_psu1; + i2c28 = &i2c_psu3; + i2c29 = &i2c_psu2; + }; + chosen { stdout-path = &uart5; bootargs = "console=ttyS4,115200 earlyprintk"; @@ -93,6 +112,10 @@ &pinctrl_ddcclk_default &pinctrl_ddcdat_default>; }; +&ibt { + status = "okay"; +}; + &lpc_snoop { status = "okay"; snoop-ports = <0x80>; @@ -299,24 +322,44 @@ #address-cells = <1>; #size-cells = <0>; reg = <0>; + + psu@59 { + compatible = "pmbus"; + reg = <0x59>; + }; }; i2c_psu1: i2c@1 { #address-cells = <1>; #size-cells = <0>; reg = <1>; + + psu@58 { + compatible = "pmbus"; + reg = <0x58>; + }; }; i2c_psu3: i2c@2 { #address-cells = <1>; #size-cells = <0>; reg = <2>; + + psu@58 { + compatible = "pmbus"; + reg = <0x58>; + }; }; i2c_psu2: i2c@3 { #address-cells = <1>; #size-cells = <0>; reg = <3>; + + psu@59 { + compatible = "pmbus"; + reg = <0x59>; + }; }; }; @@ -345,6 +388,10 @@ status = "okay"; }; +&adc { + status = "okay"; +}; + &pwm_tacho { status = "okay"; diff --git a/dts/src/arm/aspeed-g4.dtsi b/dts/src/arm/aspeed-g4.dtsi index b23a983f95..69f6b9d2e7 100644 --- a/dts/src/arm/aspeed-g4.dtsi +++ b/dts/src/arm/aspeed-g4.dtsi @@ -350,7 +350,7 @@ status = "disabled"; }; - i2c: i2c@1e78a000 { + i2c: bus@1e78a000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; diff --git a/dts/src/arm/aspeed-g5.dtsi b/dts/src/arm/aspeed-g5.dtsi index 87fdc146ff..d107459fc0 100644 --- a/dts/src/arm/aspeed-g5.dtsi +++ b/dts/src/arm/aspeed-g5.dtsi @@ -410,7 +410,7 @@ status = "disabled"; }; - i2c: i2c@1e78a000 { + i2c: bus@1e78a000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; diff --git a/dts/src/arm/at91-dvk_su60_somc.dtsi b/dts/src/arm/at91-dvk_su60_somc.dtsi index bb86f17ed5..21876da7c4 100644 --- a/dts/src/arm/at91-dvk_su60_somc.dtsi +++ b/dts/src/arm/at91-dvk_su60_somc.dtsi @@ -70,9 +70,9 @@ &i2c1 { status = "okay"; - eeprom@87 { + eeprom@57 { compatible = "giantec,gt24c32a", "atmel,24c32"; - reg = <87>; + reg = <0x57>; pagesize = <32>; }; }; diff --git a/dts/src/arm/at91-dvk_su60_somc_lcm.dtsi b/dts/src/arm/at91-dvk_su60_somc_lcm.dtsi index 4b9176dc5d..df0f0cc575 100644 --- a/dts/src/arm/at91-dvk_su60_somc_lcm.dtsi +++ b/dts/src/arm/at91-dvk_su60_somc_lcm.dtsi @@ -59,9 +59,9 @@ &i2c1 { status = "okay"; - ft5426@56 { + ft5426@38 { compatible = "focaltech,ft5426", "edt,edt-ft5406"; - reg = <56>; + reg = <0x38>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lcd_ctp_int>; diff --git a/dts/src/arm/at91-nattis-2-natte-2.dts b/dts/src/arm/at91-nattis-2-natte-2.dts index af9f38456d..911d2c7c15 100644 --- a/dts/src/arm/at91-nattis-2-natte-2.dts +++ b/dts/src/arm/at91-nattis-2-natte-2.dts @@ -16,46 +16,6 @@ compatible = "axentia,nattis-2", "axentia,natte-2", "axentia,linea", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5"; - ahb { - apb { - pinctrl@fffff200 { - nattis { - pinctrl_usba_vbus: usba_vbus { - atmel,pins = - <AT91_PIOD 28 - AT91_PERIPH_GPIO - AT91_PINCTRL_DEGLITCH>; - }; - - pinctrl_mmc0_cd: mmc0_cd { - atmel,pins = - <AT91_PIOD 5 - AT91_PERIPH_GPIO - AT91_PINCTRL_PULL_UP_DEGLITCH>; - }; - - pinctrl_lcd_prlud0: lcd_prlud0 { - atmel,pins = - <AT91_PIOA 21 - AT91_PERIPH_GPIO - AT91_PINCTRL_OUTPUT_VAL(0)>; - }; - - pinctrl_lcd_hipow0: lcd_hipow0 { - atmel,pins = - <AT91_PIOA 23 - AT91_PERIPH_GPIO - AT91_PINCTRL_OUTPUT_VAL(0)>; - }; - }; - }; - - watchdog@fffffe40 { - status = "okay"; - }; - }; - }; - gpio-keys { compatible = "gpio-keys"; @@ -103,10 +63,29 @@ }; panel: panel { - compatible = "sharp,lq150x1lg11"; + compatible = "sharp,lq150x1lg11", "panel-lvds"; + backlight = <&panel_bl>; power-supply = <&panel_reg>; + width-mm = <304>; + height-mm = <228>; + + data-mapping = "jeida-18"; + + panel-timing { + // 1024x768 @ 60Hz (typical) + clock-frequency = <50000000 65000000 80000000>; + hactive = <1024>; + vactive = <768>; + hfront-porch = <48 88 88>; + hback-porch = <96 168 168>; + hsync-len = <32 64 64>; + vsync-len = <3 13 74>; + vfront-porch = <3 13 74>; + vback-porch = <3 12 74>; + }; + port { panel_input: endpoint { remote-endpoint = <&lvds_encoder_output>; @@ -115,7 +94,10 @@ }; lvds-encoder { - compatible = "lvds-encoder"; + compatible = "ti,ds90c185", "lvds-encoder"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lvds_prlud0 &pinctrl_lvds_hipow0>; ports { #address-cells = <1>; @@ -159,6 +141,36 @@ }; }; +&pinctrl { + nattis { + pinctrl_usba_vbus: usba_vbus { + atmel,pins = <AT91_PIOD 28 AT91_PERIPH_GPIO + AT91_PINCTRL_DEGLITCH>; + }; + + pinctrl_mmc0_cd: mmc0_cd { + atmel,pins = <AT91_PIOD 5 AT91_PERIPH_GPIO + AT91_PINCTRL_PULL_UP_DEGLITCH>; + }; + + pinctrl_lvds_prlud0: lvds_prlud0 { + atmel,pins = <AT91_PIOA 21 AT91_PERIPH_GPIO + (AT91_PINCTRL_OUTPUT | + AT91_PINCTRL_OUTPUT_VAL(0))>; + }; + + pinctrl_lvds_hipow0: lvds_hipow0 { + atmel,pins = <AT91_PIOA 23 AT91_PERIPH_GPIO + (AT91_PINCTRL_OUTPUT | + AT91_PINCTRL_OUTPUT_VAL(0))>; + }; + }; +}; + +&watchdog { + status = "okay"; +}; + &i2c0 { status = "okay"; @@ -195,14 +207,12 @@ hlcdc-display-controller { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_lcd_base - &pinctrl_lcd_rgb565 - &pinctrl_lcd_prlud0 - &pinctrl_lcd_hipow0>; + pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb565>; port@0 { hlcdc_output: endpoint { remote-endpoint = <&lvds_encoder_input>; + bus-width = <16>; }; }; }; @@ -219,6 +229,7 @@ reg = <0>; bus-width = <4>; cd-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>; + cd-inverted; }; }; diff --git a/dts/src/arm/at91-sama5d27_som1_ek.dts b/dts/src/arm/at91-sama5d27_som1_ek.dts index e86e0c00eb..363a43d774 100644 --- a/dts/src/arm/at91-sama5d27_som1_ek.dts +++ b/dts/src/arm/at91-sama5d27_som1_ek.dts @@ -283,6 +283,13 @@ status = "okay"; }; + adc: adc@fc030000 { + vddana-supply = <&vddana>; + vref-supply = <&advref>; + + status = "disabled"; + }; + pinctrl@fc038000 { pinctrl_can1_default: can1_default { @@ -549,4 +556,39 @@ linux,default-trigger = "heartbeat"; }; }; + + vddin_3v3: fixed-regulator-vddin_3v3 { + compatible = "regulator-fixed"; + + regulator-name = "VDDIN_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + status = "okay"; + }; + + vddana: fixed-regulator-vddana { + compatible = "regulator-fixed"; + + regulator-name = "VDDANA"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vddin_3v3>; + status = "okay"; + }; + + advref: fixed-regulator-advref { + compatible = "regulator-fixed"; + + regulator-name = "advref"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vddana>; + status = "okay"; + }; }; diff --git a/dts/src/arm/at91-sama5d2_ptc_ek.dts b/dts/src/arm/at91-sama5d2_ptc_ek.dts index 3b1baa8605..2214bfe7aa 100644 --- a/dts/src/arm/at91-sama5d2_ptc_ek.dts +++ b/dts/src/arm/at91-sama5d2_ptc_ek.dts @@ -92,13 +92,13 @@ reg = <0x40000 0xc0000>; }; - bootloaderenv@0x100000 { - label = "bootloader env"; + bootloaderenvred@0x100000 { + label = "bootloader env redundant"; reg = <0x100000 0x40000>; }; - bootloaderenvred@0x140000 { - label = "bootloader env redundant"; + bootloaderenv@0x140000 { + label = "bootloader env"; reg = <0x140000 0x40000>; }; diff --git a/dts/src/arm/at91-sama5d2_xplained.dts b/dts/src/arm/at91-sama5d2_xplained.dts index fcc85d70f3..518e2b095c 100644 --- a/dts/src/arm/at91-sama5d2_xplained.dts +++ b/dts/src/arm/at91-sama5d2_xplained.dts @@ -281,6 +281,12 @@ status = "okay"; }; + i2s0: i2s@f8050000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2s0_default>; + status = "disabled"; /* conflict with can0 */ + }; + can0: can@f8054000 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_can0_default>; @@ -424,6 +430,24 @@ bias-disable; }; + pinctrl_i2s0_default: i2s0_default { + pinmux = <PIN_PC1__I2SC0_CK>, + <PIN_PC2__I2SC0_MCK>, + <PIN_PC3__I2SC0_WS>, + <PIN_PC4__I2SC0_DI0>, + <PIN_PC5__I2SC0_DO0>; + bias-disable; + }; + + pinctrl_i2s1_default: i2s1_default { + pinmux = <PIN_PA15__I2SC1_CK>, + <PIN_PA14__I2SC1_MCK>, + <PIN_PA16__I2SC1_WS>, + <PIN_PA17__I2SC1_DI0>, + <PIN_PA18__I2SC1_DO0>; + bias-disable; + }; + pinctrl_key_gpio_default: key_gpio_default { pinmux = <PIN_PB9__GPIO>; bias-pull-up; @@ -546,6 +570,12 @@ status = "okay"; }; + i2s1: i2s@fc04c000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2s1_default>; + status = "disabled"; /* conflict with spi0, sdmmc1 */ + }; + can1: can@fc050000 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_can1_default>; diff --git a/dts/src/arm/at91-sama5d3_xplained.dts b/dts/src/arm/at91-sama5d3_xplained.dts index 02c1d2958d..322a744e43 100644 --- a/dts/src/arm/at91-sama5d3_xplained.dts +++ b/dts/src/arm/at91-sama5d3_xplained.dts @@ -297,12 +297,17 @@ bootloader@40000 { label = "bootloader"; - reg = <0x40000 0x80000>; + reg = <0x40000 0xc0000>; }; - bootloaderenv@c0000 { + bootloaderenvred@100000 { + label = "bootloader env redundant"; + reg = <0x100000 0x40000>; + }; + + bootloaderenv@140000 { label = "bootloader env"; - reg = <0xc0000 0xc0000>; + reg = <0x140000 0x40000>; }; dtb@180000 { diff --git a/dts/src/arm/at91-sama5d4_xplained.dts b/dts/src/arm/at91-sama5d4_xplained.dts index 4b7c762d5f..43aef56ac7 100644 --- a/dts/src/arm/at91-sama5d4_xplained.dts +++ b/dts/src/arm/at91-sama5d4_xplained.dts @@ -232,12 +232,17 @@ bootloader@40000 { label = "bootloader"; - reg = <0x40000 0x80000>; + reg = <0x40000 0xc0000>; }; - bootloaderenv@c0000 { + bootloaderenvred@100000 { + label = "bootloader env redundant"; + reg = <0x100000 0x40000>; + }; + + bootloaderenv@140000 { label = "bootloader env"; - reg = <0xc0000 0xc0000>; + reg = <0x140000 0x40000>; }; dtb@180000 { @@ -252,7 +257,7 @@ rootfs@800000 { label = "rootfs"; - reg = <0x800000 0x0f800000>; + reg = <0x800000 0x1f800000>; }; }; }; diff --git a/dts/src/arm/at91-tse850-3.dts b/dts/src/arm/at91-tse850-3.dts index 2fbec69d9c..fe8876eaf9 100644 --- a/dts/src/arm/at91-tse850-3.dts +++ b/dts/src/arm/at91-tse850-3.dts @@ -16,25 +16,6 @@ compatible = "axentia,tse850v3", "axentia,linea", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5"; - ahb { - apb { - pinctrl@fffff200 { - tse850 { - pinctrl_usba_vbus: usba-vbus { - atmel,pins = - <AT91_PIOC 31 - AT91_PERIPH_GPIO - AT91_PINCTRL_DEGLITCH>; - }; - }; - }; - - watchdog@fffffe40 { - status = "okay"; - }; - }; - }; - sck: oscillator { compatible = "fixed-clock"; @@ -253,6 +234,19 @@ }; }; +&pinctrl { + tse850 { + pinctrl_usba_vbus: usba-vbus { + atmel,pins = <AT91_PIOC 31 AT91_PERIPH_GPIO + AT91_PINCTRL_DEGLITCH>; + }; + }; +}; + +&watchdog { + status = "okay"; +}; + &usart0 { status = "okay"; diff --git a/dts/src/arm/at91-vinco.dts b/dts/src/arm/at91-vinco.dts index 1be9889a2b..430277291e 100644 --- a/dts/src/arm/at91-vinco.dts +++ b/dts/src/arm/at91-vinco.dts @@ -128,7 +128,7 @@ i2c2: i2c@f8024000 { status = "okay"; - rtc1: rtc@64 { + rtc1: rtc@32 { compatible = "epson,rx8900"; reg = <0x32>; }; diff --git a/dts/src/arm/at91sam9260ek.dts b/dts/src/arm/at91sam9260ek.dts index d2b865f602..07d1b571e6 100644 --- a/dts/src/arm/at91sam9260ek.dts +++ b/dts/src/arm/at91sam9260ek.dts @@ -127,7 +127,7 @@ spi0: spi@fffc8000 { cs-gpios = <0>, <&pioC 11 0>, <0>, <0>; - mtd_dataflash@0 { + mtd_dataflash@1 { compatible = "atmel,at45", "atmel,dataflash"; spi-max-frequency = <50000000>; reg = <1>; diff --git a/dts/src/arm/at91sam9261ek.dts b/dts/src/arm/at91sam9261ek.dts index a29fc04940..a57f2d435d 100644 --- a/dts/src/arm/at91sam9261ek.dts +++ b/dts/src/arm/at91sam9261ek.dts @@ -160,7 +160,7 @@ spi-max-frequency = <15000000>; }; - tsc2046@0 { + tsc2046@2 { reg = <2>; compatible = "ti,ads7843"; interrupts-extended = <&pioC 2 IRQ_TYPE_EDGE_BOTH>; diff --git a/dts/src/arm/at91sam9g20ek_common.dtsi b/dts/src/arm/at91sam9g20ek_common.dtsi index 71df3adfc7..ec1f17ab67 100644 --- a/dts/src/arm/at91sam9g20ek_common.dtsi +++ b/dts/src/arm/at91sam9g20ek_common.dtsi @@ -109,7 +109,7 @@ spi0: spi@fffc8000 { cs-gpios = <0>, <&pioC 11 0>, <0>, <0>; - mtd_dataflash@0 { + mtd_dataflash@1 { compatible = "atmel,at45", "atmel,dataflash"; spi-max-frequency = <50000000>; reg = <1>; diff --git a/dts/src/arm/at91sam9g45.dtsi b/dts/src/arm/at91sam9g45.dtsi index 1ee25a475b..d16db1fa7e 100644 --- a/dts/src/arm/at91sam9g45.dtsi +++ b/dts/src/arm/at91sam9g45.dtsi @@ -570,7 +570,7 @@ }; }; - uart1 { + usart1 { pinctrl_usart1: usart1-0 { atmel,pins = <AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE diff --git a/dts/src/arm/at91sam9x5cm.dtsi b/dts/src/arm/at91sam9x5cm.dtsi index 4908ee07e6..c4cc9cc945 100644 --- a/dts/src/arm/at91sam9x5cm.dtsi +++ b/dts/src/arm/at91sam9x5cm.dtsi @@ -85,12 +85,22 @@ uboot@40000 { label = "u-boot"; - reg = <0x40000 0x80000>; + reg = <0x40000 0xc0000>; }; - ubootenv@c0000 { + ubootenvred@100000 { + label = "U-Boot Env Redundant"; + reg = <0x100000 0x40000>; + }; + + ubootenv@140000 { label = "U-Boot Env"; - reg = <0xc0000 0x140000>; + reg = <0x140000 0x40000>; + }; + + dtb@180000 { + label = "device tree"; + reg = <0x180000 0x80000>; }; kernel@200000 { @@ -100,7 +110,7 @@ rootfs@800000 { label = "rootfs"; - reg = <0x800000 0x1f800000>; + reg = <0x800000 0x0f800000>; }; }; }; diff --git a/dts/src/arm/bcm-hr2.dtsi b/dts/src/arm/bcm-hr2.dtsi index 3084a7c957..e4d4973128 100644 --- a/dts/src/arm/bcm-hr2.dtsi +++ b/dts/src/arm/bcm-hr2.dtsi @@ -216,7 +216,7 @@ reg = <0x33000 0x14>; }; - qspi: qspi@27200 { + qspi: spi@27200 { compatible = "brcm,spi-bcm-qspi", "brcm,spi-nsp-qspi"; reg = <0x027200 0x184>, <0x027000 0x124>, diff --git a/dts/src/arm/bcm-nsp.dtsi b/dts/src/arm/bcm-nsp.dtsi index 09ba850463..2fd111d9d5 100644 --- a/dts/src/arm/bcm-nsp.dtsi +++ b/dts/src/arm/bcm-nsp.dtsi @@ -273,7 +273,7 @@ brcm,nand-has-wp; }; - qspi: qspi@27200 { + qspi: spi@27200 { compatible = "brcm,spi-bcm-qspi", "brcm,spi-nsp-qspi"; reg = <0x027200 0x184>, <0x027000 0x124>, @@ -377,7 +377,36 @@ srab: srab@36000 { compatible = "brcm,nsp-srab"; - reg = <0x36000 0x1000>; + reg = <0x36000 0x1000>, + <0x3f308 0x8>, + <0x3f410 0xc>; + reg-names = "srab", "mux_config", "sgmii"; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "link_state_p0", + "link_state_p1", + "link_state_p2", + "link_state_p3", + "link_state_p4", + "link_state_p5", + "link_state_p7", + "link_state_p8", + "phy", + "ts", + "imp_sleep_timer_p5", + "imp_sleep_timer_p7", + "imp_sleep_timer_p8"; #address-cells = <1>; #size-cells = <0>; diff --git a/dts/src/arm/bcm2837-rpi-cm3-io3.dts b/dts/src/arm/bcm2837-rpi-cm3-io3.dts new file mode 100644 index 0000000000..6c8233a36d --- /dev/null +++ b/dts/src/arm/bcm2837-rpi-cm3-io3.dts @@ -0,0 +1,87 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; +#include "bcm2837-rpi-cm3.dtsi" +#include "bcm283x-rpi-usb-host.dtsi" + +/ { + compatible = "raspberrypi,3-compute-module", "brcm,bcm2837"; + model = "Raspberry Pi Compute Module 3 IO board V3.0"; +}; + +&gpio { + /* + * This is based on the official GPU firmware DT blob. + * + * Legend: + * "NC" = not connected (no rail from the SoC) + * "FOO" = GPIO line named "FOO" on the schematic + * "FOO_N" = GPIO line named "FOO" on schematic, active low + */ + gpio-line-names = "GPIO0", + "GPIO1", + "GPIO2", + "GPIO3", + "GPIO4", + "GPIO5", + "GPIO6", + "GPIO7", + "GPIO8", + "GPIO9", + "GPIO10", + "GPIO11", + "GPIO12", + "GPIO13", + "GPIO14", + "GPIO15", + "GPIO16", + "GPIO17", + "GPIO18", + "GPIO19", + "GPIO20", + "GPIO21", + "GPIO22", + "GPIO23", + "GPIO24", + "GPIO25", + "GPIO26", + "GPIO27", + "GPIO28", + "GPIO29", + "GPIO30", + "GPIO31", + "GPIO32", + "GPIO33", + "GPIO34", + "GPIO35", + "GPIO36", + "GPIO37", + "GPIO38", + "GPIO39", + "GPIO40", + "GPIO41", + "GPIO42", + "GPIO43", + "GPIO44", + "GPIO45", + "GPIO46", + "GPIO47", + /* Used by eMMC */ + "SD_CLK_R", + "SD_CMD_R", + "SD_DATA0_R", + "SD_DATA1_R", + "SD_DATA2_R", + "SD_DATA3_R"; + + pinctrl-0 = <&gpioout &alt0>; +}; + +&hdmi { + hpd-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_gpio14>; + status = "okay"; +}; diff --git a/dts/src/arm/bcm2837-rpi-cm3.dtsi b/dts/src/arm/bcm2837-rpi-cm3.dtsi new file mode 100644 index 0000000000..7b7ab6aea9 --- /dev/null +++ b/dts/src/arm/bcm2837-rpi-cm3.dtsi @@ -0,0 +1,52 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; +#include "bcm2837.dtsi" +#include "bcm2835-rpi.dtsi" + +/ { + memory { + reg = <0 0x40000000>; + }; + + reg_3v3: fixed-regulator { + compatible = "regulator-fixed"; + regulator-name = "3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_1v8: fixed-regulator { + compatible = "regulator-fixed"; + regulator-name = "1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; +}; + +&firmware { + expgpio: gpio { + compatible = "raspberrypi,firmware-gpio"; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "HDMI_HPD_N", + "EMMC_EN_N", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC"; + status = "okay"; + }; +}; + +&sdhost { + pinctrl-names = "default"; + pinctrl-0 = <&sdhost_gpio48>; + bus-width = <4>; + vmmc-supply = <®_3v3>; + vqmmc-supply = <®_1v8>; + status = "okay"; +}; diff --git a/dts/src/arm/bcm283x-rpi-lan7515.dtsi b/dts/src/arm/bcm283x-rpi-lan7515.dtsi index 9403da0990..70bece63f9 100644 --- a/dts/src/arm/bcm283x-rpi-lan7515.dtsi +++ b/dts/src/arm/bcm283x-rpi-lan7515.dtsi @@ -1,4 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 +#include <dt-bindings/net/microchip-lan78xx.h> + / { aliases { ethernet0 = ðernet; @@ -21,6 +23,18 @@ ethernet: ethernet@1 { compatible = "usb424,7800"; reg = <1>; + + mdio { + #address-cells = <0x1>; + #size-cells = <0x0>; + eth_phy: ethernet-phy@1 { + reg = <1>; + microchip,led-modes = < + LAN78XX_LINK_1000_ACTIVITY + LAN78XX_LINK_10_100_ACTIVITY + >; + }; + }; }; }; }; diff --git a/dts/src/arm/bcm47081-tplink-archer-c5-v2.dts b/dts/src/arm/bcm47081-tplink-archer-c5-v2.dts index 5f663f848d..189cc3dcd6 100644 --- a/dts/src/arm/bcm47081-tplink-archer-c5-v2.dts +++ b/dts/src/arm/bcm47081-tplink-archer-c5-v2.dts @@ -94,6 +94,34 @@ &spi_nor { status = "okay"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + boot@0 { + label = "boot"; + reg = <0x000000 0x040000>; + read-only; + }; + + os-image@100000 { + label = "os-image"; + reg = <0x040000 0x200000>; + compatible = "brcm,trx"; + }; + + rootfs@240000 { + label = "rootfs"; + reg = <0x240000 0xc00000>; + }; + + nvram@ff0000 { + label = "nvram"; + reg = <0xff0000 0x010000>; + }; + }; }; &usb2 { diff --git a/dts/src/arm/bcm4709-asus-rt-ac87u.dts b/dts/src/arm/bcm4709-asus-rt-ac87u.dts index 2033411240..4cb10f88a9 100644 --- a/dts/src/arm/bcm4709-asus-rt-ac87u.dts +++ b/dts/src/arm/bcm4709-asus-rt-ac87u.dts @@ -66,3 +66,34 @@ &usb3_phy { status = "okay"; }; + +&nandcs { + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + boot@0 { + label = "boot"; + reg = <0x00000000 0x00080000>; + read-only; + }; + + nvram@80000 { + label = "nvram"; + reg = <0x00080000 0x00180000>; + }; + + firmware@200000 { + label = "firmware"; + reg = <0x00200000 0x07cc0000>; + compatible = "brcm,trx"; + }; + + asus@7ec0000 { + label = "asus"; + reg = <0x07ec0000 0x00140000>; + read-only; + }; + }; +}; diff --git a/dts/src/arm/bcm4709-tplink-archer-c9-v1.dts b/dts/src/arm/bcm4709-tplink-archer-c9-v1.dts index c7143a9daa..b527d2ff98 100644 --- a/dts/src/arm/bcm4709-tplink-archer-c9-v1.dts +++ b/dts/src/arm/bcm4709-tplink-archer-c9-v1.dts @@ -103,6 +103,34 @@ &spi_nor { status = "okay"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + boot@0 { + label = "boot"; + reg = <0x000000 0x040000>; + read-only; + }; + + os-image@100000 { + label = "os-image"; + reg = <0x040000 0x200000>; + compatible = "brcm,trx"; + }; + + rootfs@240000 { + label = "rootfs"; + reg = <0x240000 0xc00000>; + }; + + nvram@ff0000 { + label = "nvram"; + reg = <0xff0000 0x010000>; + }; + }; }; &usb3_phy { diff --git a/dts/src/arm/bcm5301x-nand-cs0.dtsi b/dts/src/arm/bcm5301x-nand-cs0.dtsi index e5a2d62daf..925a7c9ce5 100644 --- a/dts/src/arm/bcm5301x-nand-cs0.dtsi +++ b/dts/src/arm/bcm5301x-nand-cs0.dtsi @@ -12,6 +12,10 @@ reg = <0>; #address-cells = <1>; #size-cells = <1>; + + partitions { + compatible = "brcm,bcm947xx-cfe-partitions"; + }; }; }; }; diff --git a/dts/src/arm/bcm5301x.dtsi b/dts/src/arm/bcm5301x.dtsi index bc607d11ee..7a5c188c26 100644 --- a/dts/src/arm/bcm5301x.dtsi +++ b/dts/src/arm/bcm5301x.dtsi @@ -475,8 +475,11 @@ compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <20000000>; - linux,part-probe = "ofpart", "bcm47xxpart"; status = "disabled"; + + partitions { + compatible = "brcm,bcm947xx-cfe-partitions"; + }; }; }; diff --git a/dts/src/arm/bcm958625hr.dts b/dts/src/arm/bcm958625hr.dts index ea3fc194f8..a53a2f629d 100644 --- a/dts/src/arm/bcm958625hr.dts +++ b/dts/src/arm/bcm958625hr.dts @@ -58,6 +58,24 @@ open-source; priority = <200>; }; + + /* Hardware I2C block cannot do more than 63 bytes per transfer, + * which would prevent reading from a SFP's EEPROM (256 byte). + */ + i2c1: i2c { + compatible = "i2c-gpio"; + sda-gpios = <&gpioa 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpioa 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + }; + + sfp: sfp { + compatible = "sff,sfp"; + i2c-bus = <&i2c1>; + mod-def0-gpios = <&gpioa 28 GPIO_ACTIVE_LOW>; + los-gpios = <&gpioa 24 GPIO_ACTIVE_HIGH>; + tx-fault-gpios = <&gpioa 30 GPIO_ACTIVE_HIGH>; + tx-disable-gpios = <&gpioa 26 GPIO_ACTIVE_HIGH>; + }; }; &amac0 { @@ -210,6 +228,14 @@ reg = <4>; }; + port@5 { + label = "sfp"; + phy-mode = "sgmii"; + reg = <5>; + sfp = <&sfp>; + managed = "in-band-status"; + }; + port@8 { ethernet = <&amac2>; label = "cpu"; diff --git a/dts/src/arm/da850-evm.dts b/dts/src/arm/da850-evm.dts index f9b7579058..a3c9b34672 100644 --- a/dts/src/arm/da850-evm.dts +++ b/dts/src/arm/da850-evm.dts @@ -221,6 +221,12 @@ gpio-controller; #gpio-cells = <2>; }; + tca6416_bb: gpio@21 { + compatible = "ti,tca6416"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + }; }; &wdt { diff --git a/dts/src/arm/da850-lego-ev3.dts b/dts/src/arm/da850-lego-ev3.dts index c4729d0e6c..66fcadf0ba 100644 --- a/dts/src/arm/da850-lego-ev3.dts +++ b/dts/src/arm/da850-lego-ev3.dts @@ -352,7 +352,8 @@ compatible = "ti,ads7957"; reg = <3>; #io-channel-cells = <1>; - spi-max-frequency = <10000000>; + spi-max-frequency = <1000000>; + ti,spi-wdelay = <63>; vref-supply = <&adc_ref>; }; }; diff --git a/dts/src/arm/dm8148-evm.dts b/dts/src/arm/dm8148-evm.dts index 85d7b5148b..2d201719ba 100644 --- a/dts/src/arm/dm8148-evm.dts +++ b/dts/src/arm/dm8148-evm.dts @@ -27,15 +27,25 @@ }; &cpsw_emac0 { - phy_id = <&davinci_mdio>, <0>; + phy-handle = <ðphy0>; phy-mode = "rgmii"; }; &cpsw_emac1 { - phy_id = <&davinci_mdio>, <1>; + phy-handle = <ðphy1>; phy-mode = "rgmii"; }; +&davinci_mdio { + ethphy0: ethernet-phy@0 { + reg = <0>; + }; + + ethphy1: ethernet-phy@1 { + reg = <1>; + }; +}; + &gpmc { ranges = <0 0 0x04000000 0x01000000>; /* CS0: 16MB for NAND */ diff --git a/dts/src/arm/dm8148-t410.dts b/dts/src/arm/dm8148-t410.dts index c46a227b54..63301bcacf 100644 --- a/dts/src/arm/dm8148-t410.dts +++ b/dts/src/arm/dm8148-t410.dts @@ -36,15 +36,25 @@ }; &cpsw_emac0 { - phy_id = <&davinci_mdio>, <0>; + phy-handle = <ðphy0>; phy-mode = "rgmii"; }; &cpsw_emac1 { - phy_id = <&davinci_mdio>, <1>; + phy-handle = <ðphy1>; phy-mode = "rgmii"; }; +&davinci_mdio { + ethphy0: ethernet-phy@0 { + reg = <0>; + }; + + ethphy1: ethernet-phy@1 { + reg = <1>; + }; +}; + &mmc1 { status = "disabled"; }; diff --git a/dts/src/arm/dove-cubox.dts b/dts/src/arm/dove-cubox.dts index 580e3cbcfb..3e1584e787 100644 --- a/dts/src/arm/dove-cubox.dts +++ b/dts/src/arm/dove-cubox.dts @@ -87,7 +87,7 @@ status = "okay"; clock-frequency = <100000>; - si5351: clock-generator { + si5351: clock-generator@60 { compatible = "silabs,si5351a-msop"; reg = <0x60>; #address-cells = <1>; diff --git a/dts/src/arm/dove.dtsi b/dts/src/arm/dove.dtsi index 4a0a5115b2..250ad0535e 100644 --- a/dts/src/arm/dove.dtsi +++ b/dts/src/arm/dove.dtsi @@ -155,7 +155,7 @@ 0xffffe000 MBUS_ID(0x03, 0x01) 0 0x0000800 /* CESA SRAM 2k */ 0xfffff000 MBUS_ID(0x0d, 0x00) 0 0x0000800>; /* PMU SRAM 2k */ - spi0: spi-ctrl@10600 { + spi0: spi@10600 { compatible = "marvell,orion-spi"; #address-cells = <1>; #size-cells = <0>; @@ -168,7 +168,7 @@ status = "disabled"; }; - i2c: i2c-ctrl@11000 { + i2c: i2c@11000 { compatible = "marvell,mv64xxx-i2c"; reg = <0x11000 0x20>; #address-cells = <1>; @@ -218,7 +218,7 @@ status = "disabled"; }; - spi1: spi-ctrl@14600 { + spi1: spi@14600 { compatible = "marvell,orion-spi"; #address-cells = <1>; #size-cells = <0>; diff --git a/dts/src/arm/dra62x-j5eco-evm.dts b/dts/src/arm/dra62x-j5eco-evm.dts index 31b824ad5d..906aedde04 100644 --- a/dts/src/arm/dra62x-j5eco-evm.dts +++ b/dts/src/arm/dra62x-j5eco-evm.dts @@ -27,15 +27,25 @@ }; &cpsw_emac0 { - phy_id = <&davinci_mdio>, <0>; + phy-handle = <ðphy0>; phy-mode = "rgmii"; }; &cpsw_emac1 { - phy_id = <&davinci_mdio>, <1>; + phy-handle = <ðphy1>; phy-mode = "rgmii"; }; +&davinci_mdio { + ethphy0: ethernet-phy@0 { + reg = <0>; + }; + + ethphy1: ethernet-phy@1 { + reg = <1>; + }; +}; + &gpmc { ranges = <0 0 0x04000000 0x01000000>; /* CS0: 16MB for NAND */ diff --git a/dts/src/arm/dra7-evm.dts b/dts/src/arm/dra7-evm.dts index 6ed5f91562..cc079064a2 100644 --- a/dts/src/arm/dra7-evm.dts +++ b/dts/src/arm/dra7-evm.dts @@ -512,17 +512,27 @@ }; &cpsw_emac0 { - phy_id = <&davinci_mdio>, <2>; + phy-handle = <ðphy0>; phy-mode = "rgmii"; dual_emac_res_vlan = <1>; }; &cpsw_emac1 { - phy_id = <&davinci_mdio>, <3>; + phy-handle = <ðphy1>; phy-mode = "rgmii"; dual_emac_res_vlan = <2>; }; +&davinci_mdio { + ethphy0: ethernet-phy@2 { + reg = <2>; + }; + + ethphy1: ethernet-phy@3 { + reg = <3>; + }; +}; + &dcan1 { status = "ok"; pinctrl-names = "default", "sleep", "active"; diff --git a/dts/src/arm/dra7.dtsi b/dts/src/arm/dra7.dtsi index a0ddf497e8..7ce24b282d 100644 --- a/dts/src/arm/dra7.dtsi +++ b/dts/src/arm/dra7.dtsi @@ -336,6 +336,7 @@ <0 0 0 2 &pcie1_intc 2>, <0 0 0 3 &pcie1_intc 3>, <0 0 0 4 &pcie1_intc 4>; + ti,syscon-unaligned-access = <&scm_conf1 0x14 1>; status = "disabled"; pcie1_intc: interrupt-controller { interrupt-controller; @@ -354,7 +355,7 @@ ti,hwmods = "pcie1"; phys = <&pcie1_phy>; phy-names = "pcie-phy0"; - ti,syscon-unaligned-access = <&scm_conf1 0x14 2>; + ti,syscon-unaligned-access = <&scm_conf1 0x14 1>; status = "disabled"; }; }; @@ -387,6 +388,7 @@ <0 0 0 2 &pcie2_intc 2>, <0 0 0 3 &pcie2_intc 3>, <0 0 0 4 &pcie2_intc 4>; + ti,syscon-unaligned-access = <&scm_conf1 0x14 2>; pcie2_intc: interrupt-controller { interrupt-controller; #address-cells = <0>; @@ -1369,7 +1371,7 @@ status = "disabled"; }; - qspi: qspi@4b300000 { + qspi: spi@4b300000 { compatible = "ti,dra7xxx-qspi"; reg = <0x4b300000 0x100>, <0x5c000000 0x4000000>; diff --git a/dts/src/arm/dra71-evm.dts b/dts/src/arm/dra71-evm.dts index c471bf3277..82cc7ec37a 100644 --- a/dts/src/arm/dra71-evm.dts +++ b/dts/src/arm/dra71-evm.dts @@ -203,13 +203,13 @@ }; &cpsw_emac0 { - phy_id = <&davinci_mdio>, <2>; + phy-handle = <&dp83867_0>; phy-mode = "rgmii-id"; dual_emac_res_vlan = <1>; }; &cpsw_emac1 { - phy_id = <&davinci_mdio>, <3>; + phy-handle = <&dp83867_1>; phy-mode = "rgmii-id"; dual_emac_res_vlan = <2>; }; diff --git a/dts/src/arm/dra72-evm-revc.dts b/dts/src/arm/dra72-evm-revc.dts index bf588d0072..fafc2a4d7b 100644 --- a/dts/src/arm/dra72-evm-revc.dts +++ b/dts/src/arm/dra72-evm-revc.dts @@ -61,13 +61,13 @@ }; &cpsw_emac0 { - phy_id = <&davinci_mdio>, <2>; + phy-handle = <&dp83867_0>; phy-mode = "rgmii-id"; dual_emac_res_vlan = <1>; }; &cpsw_emac1 { - phy_id = <&davinci_mdio>, <3>; + phy-handle = <&dp83867_1>; phy-mode = "rgmii-id"; dual_emac_res_vlan = <2>; }; diff --git a/dts/src/arm/dra72-evm.dts b/dts/src/arm/dra72-evm.dts index c572693b16..154b0a0ceb 100644 --- a/dts/src/arm/dra72-evm.dts +++ b/dts/src/arm/dra72-evm.dts @@ -51,10 +51,16 @@ }; &cpsw_emac0 { - phy_id = <&davinci_mdio>, <3>; + phy-handle = <ðphy0>; phy-mode = "rgmii"; }; +&davinci_mdio { + ethphy0: ethernet-phy@3 { + reg = <3>; + }; +}; + &mmc1 { pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104"; pinctrl-0 = <&mmc1_pins_default>; diff --git a/dts/src/arm/dra76-evm.dts b/dts/src/arm/dra76-evm.dts index 5a46163d46..8a57895fd8 100644 --- a/dts/src/arm/dra76-evm.dts +++ b/dts/src/arm/dra76-evm.dts @@ -375,13 +375,13 @@ }; &cpsw_emac0 { - phy_id = <&davinci_mdio>, <2>; + phy-handle = <&dp83867_0>; phy-mode = "rgmii-id"; dual_emac_res_vlan = <1>; }; &cpsw_emac1 { - phy_id = <&davinci_mdio>, <3>; + phy-handle = <&dp83867_1>; phy-mode = "rgmii-id"; dual_emac_res_vlan = <2>; }; diff --git a/dts/src/arm/exynos3250-artik5.dtsi b/dts/src/arm/exynos3250-artik5.dtsi index 620b50c19e..7c22cbf6f3 100644 --- a/dts/src/arm/exynos3250-artik5.dtsi +++ b/dts/src/arm/exynos3250-artik5.dtsi @@ -69,6 +69,8 @@ compatible = "samsung,s2mps14-pmic"; interrupt-parent = <&gpx3>; interrupts = <5 IRQ_TYPE_NONE>; + pinctrl-names = "default"; + pinctrl-0 = <&s2mps14_irq>; reg = <0x66>; s2mps14_osc: clocks { @@ -350,6 +352,11 @@ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV3>; samsung,pin-val = <1>; }; + + s2mps14_irq: s2mps14-irq { + samsung,pins = "gpx3-5"; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; }; &rtc { diff --git a/dts/src/arm/exynos4210-origen.dts b/dts/src/arm/exynos4210-origen.dts index 2ab99f9f3d..dd9ec05eb0 100644 --- a/dts/src/arm/exynos4210-origen.dts +++ b/dts/src/arm/exynos4210-origen.dts @@ -151,6 +151,8 @@ reg = <0x66>; interrupt-parent = <&gpx0>; interrupts = <4 IRQ_TYPE_NONE>, <3 IRQ_TYPE_NONE>; + pinctrl-names = "default"; + pinctrl-0 = <&max8997_irq>; max8997,pmic-buck1-dvs-voltage = <1350000>; max8997,pmic-buck2-dvs-voltage = <1100000>; @@ -288,6 +290,13 @@ }; }; +&pinctrl_1 { + max8997_irq: max8997-irq { + samsung,pins = "gpx0-3", "gpx0-4"; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; +}; + &sdhci_0 { bus-width = <4>; pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_cd>; diff --git a/dts/src/arm/exynos4210-trats.dts b/dts/src/arm/exynos4210-trats.dts index 6f1d76cb79..f9bbc6315c 100644 --- a/dts/src/arm/exynos4210-trats.dts +++ b/dts/src/arm/exynos4210-trats.dts @@ -385,6 +385,12 @@ regulator-max-microvolt = <1800000>; }; + tflash_reg: LDO17 { + regulator-name = "VTF_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + vddq_reg: LDO21 { regulator-name = "VDDQ_M1M2_1.2V"; regulator-min-microvolt = <1200000>; @@ -452,6 +458,15 @@ status = "okay"; }; +&sdhci_2 { + bus-width = <4>; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>; + pinctrl-names = "default"; + vmmc-supply = <&tflash_reg>; + cd-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + &serial_0 { status = "okay"; }; diff --git a/dts/src/arm/exynos4210-universal_c210.dts b/dts/src/arm/exynos4210-universal_c210.dts index 4e6ff97e1e..5c3d98654f 100644 --- a/dts/src/arm/exynos4210-universal_c210.dts +++ b/dts/src/arm/exynos4210-universal_c210.dts @@ -310,6 +310,9 @@ pmic@66 { compatible = "national,lp3974"; + interrupts-extended = <&gpx0 7 0>, <&gpx2 7 0>; + pinctrl-names = "default"; + pinctrl-0 = <&lp3974_irq>; reg = <0x66>; max8998,pmic-buck1-default-dvs-idx = <0>; @@ -503,6 +506,11 @@ }; &pinctrl_1 { + lp3974_irq: lp3974-irq { + samsung,pins = "gpx0-7", "gpx2-7"; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + hdmi_hpd: hdmi-hpd { samsung,pins = "gpx3-7"; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; @@ -537,8 +545,7 @@ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>; pinctrl-names = "default"; vmmc-supply = <&ldo5_reg>; - cd-gpios = <&gpx3 4 GPIO_ACTIVE_HIGH>; - cd-inverted; + cd-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/dts/src/arm/exynos4412-midas.dtsi b/dts/src/arm/exynos4412-midas.dtsi index c0476c2909..aed2f2e2b0 100644 --- a/dts/src/arm/exynos4412-midas.dtsi +++ b/dts/src/arm/exynos4412-midas.dtsi @@ -1269,8 +1269,7 @@ &sdhci_2 { bus-width = <4>; - cd-gpios = <&gpx3 4 GPIO_ACTIVE_HIGH>; - cd-inverted; + cd-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>; pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sdhci2_cd>; pinctrl-names = "default"; vmmc-supply = <&ldo21_reg>; diff --git a/dts/src/arm/exynos4412-odroid-common.dtsi b/dts/src/arm/exynos4412-odroid-common.dtsi index a09e46c9db..2caa3132f3 100644 --- a/dts/src/arm/exynos4412-odroid-common.dtsi +++ b/dts/src/arm/exynos4412-odroid-common.dtsi @@ -539,8 +539,7 @@ pinctrl-names = "default"; vmmc-supply = <&ldo21_reg>; vqmmc-supply = <&ldo4_reg>; - cd-gpios = <&gpk2 2 GPIO_ACTIVE_HIGH>; - cd-inverted; + cd-gpios = <&gpk2 2 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/dts/src/arm/exynos5250-arndale.dts b/dts/src/arm/exynos5250-arndale.dts index 7a8a5c5570..7d1f2dc590 100644 --- a/dts/src/arm/exynos5250-arndale.dts +++ b/dts/src/arm/exynos5250-arndale.dts @@ -71,6 +71,17 @@ }; }; + panel: panel { + compatible = "boe,hv070wsa-100"; + power-supply = <&vcc_3v3_reg>; + enable-gpios = <&gpd1 3 GPIO_ACTIVE_HIGH>; + port { + panel_ep: endpoint { + remote-endpoint = <&bridge_out_ep>; + }; + }; + }; + regulators { compatible = "simple-bus"; #address-cells = <1>; @@ -97,6 +108,30 @@ reg = <2>; regulator-name = "hdmi-en"; }; + + vcc_1v2_reg: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "VCC_1V2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + vcc_1v8_reg: regulator@4 { + compatible = "regulator-fixed"; + reg = <4>; + regulator-name = "VCC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vcc_3v3_reg: regulator@5 { + compatible = "regulator-fixed"; + reg = <5>; + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; }; fixed-rate-clocks { @@ -119,6 +154,32 @@ cpu0-supply = <&buck2_reg>; }; +&dsi_0 { + vddcore-supply = <&ldo8_reg>; + vddio-supply = <&ldo10_reg>; + samsung,pll-clock-frequency = <24000000>; + samsung,burst-clock-frequency = <320000000>; + samsung,esc-clock-frequency = <10000000>; + status = "okay"; + + bridge@0 { + reg = <0>; + compatible = "toshiba,tc358764"; + vddc-supply = <&vcc_1v2_reg>; + vddio-supply = <&vcc_1v8_reg>; + vddlvds-supply = <&vcc_3v3_reg>; + reset-gpios = <&gpd1 6 GPIO_ACTIVE_LOW>; + #address-cells = <1>; + #size-cells = <0>; + port@1 { + reg = <1>; + bridge_out_ep: endpoint { + remote-endpoint = <&panel_ep>; + }; + }; + }; +}; + &dp { status = "okay"; samsung,color-space = <0>; @@ -149,9 +210,11 @@ }; &hdmi { + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_hpd>; status = "okay"; - ddc = <&i2c_2>; - hpd-gpios = <&gpx3 7 GPIO_ACTIVE_LOW>; + ddc = <&i2c_ddc>; + hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>; vdd_osc-supply = <&ldo10_reg>; vdd_pll-supply = <&ldo8_reg>; vdd-supply = <&ldo8_reg>; @@ -168,6 +231,8 @@ reg = <0x66>; interrupt-parent = <&gpx3>; interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&s5m8767_irq>; vinb1-supply = <&main_dc_reg>; vinb2-supply = <&main_dc_reg>; @@ -452,13 +517,6 @@ }; }; -&i2c_2 { - status = "okay"; - /* used by HDMI DDC */ - samsung,i2c-sda-delay = <100>; - samsung,i2c-max-bus-freq = <66000>; -}; - &i2c_3 { status = "okay"; @@ -535,6 +593,13 @@ cap-sd-highspeed; }; +&pinctrl_0 { + s5m8767_irq: s5m8767-irq { + samsung,pins = "gpx3-2"; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; +}; + &rtc { status = "okay"; }; @@ -547,3 +612,22 @@ status = "okay"; samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>; }; + +&soc { + /* + * For unknown reasons HDMI-DDC does not work with Exynos I2C + * controllers. Lets use software I2C over GPIO pins as a workaround. + */ + i2c_ddc: i2c-gpio { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_gpio_bus>; + status = "okay"; + compatible = "i2c-gpio"; + gpios = <&gpa0 6 0 /* sda */ + &gpa0 7 0 /* scl */ + >; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; +}; diff --git a/dts/src/arm/exynos5250-pinctrl.dtsi b/dts/src/arm/exynos5250-pinctrl.dtsi index 6ff6dea29d..d31a68672b 100644 --- a/dts/src/arm/exynos5250-pinctrl.dtsi +++ b/dts/src/arm/exynos5250-pinctrl.dtsi @@ -225,6 +225,12 @@ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; }; + i2c2_gpio_bus: i2c2-gpio-bus { + samsung,pins = "gpa0-6", "gpa0-7"; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + uart2_data: uart2-data { samsung,pins = "gpa1-0", "gpa1-1"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; @@ -593,6 +599,11 @@ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; }; + + hdmi_hpd: hdmi-hpd { + samsung,pins = "gpx3-7"; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; }; &pinctrl_1 { diff --git a/dts/src/arm/exynos5250-snow-rev5.dts b/dts/src/arm/exynos5250-snow-rev5.dts index 0348b1c49a..7cbfc6f1f4 100644 --- a/dts/src/arm/exynos5250-snow-rev5.dts +++ b/dts/src/arm/exynos5250-snow-rev5.dts @@ -20,6 +20,14 @@ samsung,model = "Snow-I2S-MAX98090"; samsung,audio-codec = <&max98090>; + + cpu { + sound-dai = <&i2s0 0>; + }; + + codec { + sound-dai = <&max98090 0>, <&hdmi>; + }; }; }; @@ -31,6 +39,9 @@ interrupt-parent = <&gpx0>; pinctrl-names = "default"; pinctrl-0 = <&max98090_irq>; + clocks = <&pmu_system_controller 0>; + clock-names = "mclk"; + #sound-dai-cells = <1>; }; }; diff --git a/dts/src/arm/exynos5250.dtsi b/dts/src/arm/exynos5250.dtsi index da163a40af..5044f754e6 100644 --- a/dts/src/arm/exynos5250.dtsi +++ b/dts/src/arm/exynos5250.dtsi @@ -54,62 +54,109 @@ device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0>; - clock-frequency = <1700000000>; clocks = <&clock CLK_ARM_CLK>; clock-names = "cpu"; - clock-latency = <140000>; - - operating-points = < - 1700000 1300000 - 1600000 1250000 - 1500000 1225000 - 1400000 1200000 - 1300000 1150000 - 1200000 1125000 - 1100000 1100000 - 1000000 1075000 - 900000 1050000 - 800000 1025000 - 700000 1012500 - 600000 1000000 - 500000 975000 - 400000 950000 - 300000 937500 - 200000 925000 - >; + operating-points-v2 = <&cpu0_opp_table>; #cooling-cells = <2>; /* min followed by max */ }; cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <1>; - clock-frequency = <1700000000>; clocks = <&clock CLK_ARM_CLK>; clock-names = "cpu"; - clock-latency = <140000>; - - operating-points = < - 1700000 1300000 - 1600000 1250000 - 1500000 1225000 - 1400000 1200000 - 1300000 1150000 - 1200000 1125000 - 1100000 1100000 - 1000000 1075000 - 900000 1050000 - 800000 1025000 - 700000 1012500 - 600000 1000000 - 500000 975000 - 400000 950000 - 300000 937500 - 200000 925000 - >; + operating-points-v2 = <&cpu0_opp_table>; #cooling-cells = <2>; /* min followed by max */ }; }; + cpu0_opp_table: opp_table0 { + compatible = "operating-points-v2"; + opp-shared; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + opp-microvolt = <925000>; + clock-latency-ns = <140000>; + }; + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-microvolt = <937500>; + clock-latency-ns = <140000>; + }; + opp-400000000 { + opp-hz = /bits/ 64 <400000000>; + opp-microvolt = <950000>; + clock-latency-ns = <140000>; + }; + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <975000>; + clock-latency-ns = <140000>; + }; + opp-600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <1000000>; + clock-latency-ns = <140000>; + }; + opp-700000000 { + opp-hz = /bits/ 64 <700000000>; + opp-microvolt = <1012500>; + clock-latency-ns = <140000>; + }; + opp-800000000 { + opp-hz = /bits/ 64 <800000000>; + opp-microvolt = <1025000>; + clock-latency-ns = <140000>; + }; + opp-900000000 { + opp-hz = /bits/ 64 <900000000>; + opp-microvolt = <1050000>; + clock-latency-ns = <140000>; + }; + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <1075000>; + clock-latency-ns = <140000>; + opp-suspend; + }; + opp-1100000000 { + opp-hz = /bits/ 64 <1100000000>; + opp-microvolt = <1100000>; + clock-latency-ns = <140000>; + }; + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <1125000>; + clock-latency-ns = <140000>; + }; + opp-1300000000 { + opp-hz = /bits/ 64 <1300000000>; + opp-microvolt = <1150000>; + clock-latency-ns = <140000>; + }; + opp-1400000000 { + opp-hz = /bits/ 64 <1400000000>; + opp-microvolt = <1200000>; + clock-latency-ns = <140000>; + }; + opp-1500000000 { + opp-hz = /bits/ 64 <1500000000>; + opp-microvolt = <1225000>; + clock-latency-ns = <140000>; + }; + opp-1600000000 { + opp-hz = /bits/ 64 <1600000000>; + opp-microvolt = <1250000>; + clock-latency-ns = <140000>; + }; + opp-1700000000 { + opp-hz = /bits/ 64 <1700000000>; + opp-microvolt = <1300000>; + clock-latency-ns = <140000>; + }; + }; + soc: soc { sysram@2020000 { compatible = "mmio-sram"; @@ -756,6 +803,27 @@ #phy-cells = <0>; }; + mipi_phy: video-phy@10040710 { + compatible = "samsung,s5pv210-mipi-video-phy"; + reg = <0x10040710 0x100>; + #phy-cells = <1>; + syscon = <&pmu_system_controller>; + }; + + dsi_0: dsi@14500000 { + compatible = "samsung,exynos4210-mipi-dsi"; + reg = <0x14500000 0x10000>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + samsung,power-domain = <&pd_disp1>; + phys = <&mipi_phy 3>; + phy-names = "dsim"; + clocks = <&clock CLK_DSIM0>, <&clock CLK_SCLK_MIPI1>; + clock-names = "bus_clk", "sclk_mipi"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + adc: adc@12d10000 { compatible = "samsung,exynos-adc-v1"; reg = <0x12D10000 0x100>; diff --git a/dts/src/arm/exynos5410-odroidxu.dts b/dts/src/arm/exynos5410-odroidxu.dts index a2046f5f99..434a7591ff 100644 --- a/dts/src/arm/exynos5410-odroidxu.dts +++ b/dts/src/arm/exynos5410-odroidxu.dts @@ -530,7 +530,7 @@ samsung,dw-mshc-sdr-timing = <0 4>; samsung,dw-mshc-ddr-timing = <0 2>; pinctrl-names = "default"; - pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4 &sd2_wp>; bus-width = <4>; cap-sd-highspeed; vmmc-supply = <&ldo21_reg>; @@ -545,6 +545,14 @@ samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; }; + sd2_wp: sd2-wp { + samsung,pins = "gpm5-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + /* Pin is floating so be sure to disable write-protect */ + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>; + }; + pmic_dvs_3: pmic-dvs-3 { samsung,pins = "gpx0-0"; samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; diff --git a/dts/src/arm/exynos5420-peach-pit.dts b/dts/src/arm/exynos5420-peach-pit.dts index 57c2332bf2..f78db6809c 100644 --- a/dts/src/arm/exynos5420-peach-pit.dts +++ b/dts/src/arm/exynos5420-peach-pit.dts @@ -153,7 +153,7 @@ &clock_audss { assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>; - assigned-clock-parents = <&clock CLK_FOUT_EPLL>; + assigned-clock-parents = <&clock CLK_MAU_EPLL>; }; &cpu0 { @@ -312,6 +312,7 @@ regulator-name = "vdd_1v35"; regulator-min-microvolt = <1350000>; regulator-max-microvolt = <1350000>; + regulator-always-on; regulator-boot-on; regulator-state-mem { regulator-on-in-suspend; @@ -333,6 +334,7 @@ regulator-name = "vdd_2v"; regulator-min-microvolt = <2000000>; regulator-max-microvolt = <2000000>; + regulator-always-on; regulator-boot-on; regulator-state-mem { regulator-on-in-suspend; @@ -343,6 +345,7 @@ regulator-name = "vdd_1v8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + regulator-always-on; regulator-boot-on; regulator-state-mem { regulator-on-in-suspend; diff --git a/dts/src/arm/exynos5422-odroid-core.dtsi b/dts/src/arm/exynos5422-odroid-core.dtsi index 2f4f40882d..2fac4baf1e 100644 --- a/dts/src/arm/exynos5422-odroid-core.dtsi +++ b/dts/src/arm/exynos5422-odroid-core.dtsi @@ -154,6 +154,13 @@ regulator-always-on; }; + ldo2_reg: LDO2 { + regulator-name = "vdd_ldo2"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + ldo3_reg: LDO3 { regulator-name = "vddq_mmc0"; regulator-min-microvolt = <1800000>; @@ -216,10 +223,10 @@ }; ldo12_reg: LDO12 { + /* Unused */ regulator-name = "vdd_ldo12"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <2375000>; }; ldo13_reg: LDO13 { @@ -228,6 +235,13 @@ regulator-max-microvolt = <2800000>; }; + ldo14_reg: LDO14 { + /* Unused */ + regulator-name = "vdd_ldo14"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3950000>; + }; + ldo15_reg: LDO15 { regulator-name = "vdd_ldo15"; regulator-min-microvolt = <3300000>; @@ -236,10 +250,10 @@ }; ldo16_reg: LDO16 { + /* Unused */ regulator-name = "vdd_ldo16"; - regulator-min-microvolt = <2200000>; - regulator-max-microvolt = <2200000>; - regulator-always-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3950000>; }; ldo17_reg: LDO17 { @@ -261,20 +275,139 @@ regulator-max-microvolt = <2800000>; }; - ldo24_reg: LDO24 { - regulator-name = "tsp_io"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; + ldo20_reg: LDO20 { + /* Unused */ + regulator-name = "vdd_ldo20"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3950000>; + }; + + ldo21_reg: LDO21 { + /* Unused */ + regulator-name = "vdd_ldo21"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3950000>; + }; + + ldo22_reg: LDO22 { + /* Unused */ + regulator-name = "vdd_ldo22"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <2375000>; + }; + + ldo23_reg: LDO23 { + regulator-name = "vdd_mifs"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; regulator-always-on; }; + ldo24_reg: LDO24 { + /* Unused */ + regulator-name = "vdd_ldo24"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3950000>; + }; + + ldo25_reg: LDO25 { + /* Unused */ + regulator-name = "vdd_ldo25"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3950000>; + }; + ldo26_reg: LDO26 { + /* Used on XU3, XU3-Lite and XU4 */ regulator-name = "vdd_ldo26"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3950000>; + }; + + ldo27_reg: LDO27 { + regulator-name = "vdd_g3ds"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; regulator-always-on; }; + ldo28_reg: LDO28 { + /* Used on XU3 */ + regulator-name = "vdd_ldo28"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3950000>; + }; + + ldo29_reg: LDO29 { + /* Unused */ + regulator-name = "vdd_ldo29"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3950000>; + }; + + ldo30_reg: LDO30 { + /* Unused */ + regulator-name = "vdd_ldo30"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3950000>; + }; + + ldo31_reg: LDO31 { + /* Unused */ + regulator-name = "vdd_ldo31"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3950000>; + }; + + ldo32_reg: LDO32 { + /* Unused */ + regulator-name = "vdd_ldo32"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3950000>; + }; + + ldo33_reg: LDO33 { + /* Unused */ + regulator-name = "vdd_ldo33"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3950000>; + }; + + ldo34_reg: LDO34 { + /* Unused */ + regulator-name = "vdd_ldo34"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3950000>; + }; + + ldo35_reg: LDO35 { + /* Unused */ + regulator-name = "vdd_ldo35"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <2375000>; + }; + + ldo36_reg: LDO36 { + /* Unused */ + regulator-name = "vdd_ldo36"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3950000>; + }; + + ldo37_reg: LDO37 { + /* Unused */ + regulator-name = "vdd_ldo37"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3950000>; + }; + + ldo38_reg: LDO38 { + /* Unused */ + regulator-name = "vdd_ldo38"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3950000>; + }; + buck1_reg: BUCK1 { regulator-name = "vdd_mif"; regulator-min-microvolt = <800000>; diff --git a/dts/src/arm/exynos5422-odroidxu3-common.dtsi b/dts/src/arm/exynos5422-odroidxu3-common.dtsi index 96e281c0a1..e522edb2bb 100644 --- a/dts/src/arm/exynos5422-odroidxu3-common.dtsi +++ b/dts/src/arm/exynos5422-odroidxu3-common.dtsi @@ -367,6 +367,12 @@ status = "okay"; }; +&ldo26_reg { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; +}; + &mixer { status = "okay"; }; diff --git a/dts/src/arm/exynos5422-odroidxu3.dts b/dts/src/arm/exynos5422-odroidxu3.dts index 0322f28191..db0bc17a66 100644 --- a/dts/src/arm/exynos5422-odroidxu3.dts +++ b/dts/src/arm/exynos5422-odroidxu3.dts @@ -49,6 +49,12 @@ }; }; +&ldo28_reg { + regulator-name = "dp_p3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; +}; + &pwm { /* * PWM 0 -- fan diff --git a/dts/src/arm/exynos5800-peach-pi.dts b/dts/src/arm/exynos5800-peach-pi.dts index d80ab9085d..e0f470fe54 100644 --- a/dts/src/arm/exynos5800-peach-pi.dts +++ b/dts/src/arm/exynos5800-peach-pi.dts @@ -153,7 +153,7 @@ &clock_audss { assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>; - assigned-clock-parents = <&clock CLK_FOUT_EPLL>; + assigned-clock-parents = <&clock CLK_MAU_EPLL>; }; &cpu0 { @@ -312,6 +312,7 @@ regulator-name = "vdd_1v35"; regulator-min-microvolt = <1350000>; regulator-max-microvolt = <1350000>; + regulator-always-on; regulator-boot-on; regulator-state-mem { regulator-on-in-suspend; @@ -333,6 +334,7 @@ regulator-name = "vdd_2v"; regulator-min-microvolt = <2000000>; regulator-max-microvolt = <2000000>; + regulator-always-on; regulator-boot-on; regulator-state-mem { regulator-on-in-suspend; @@ -343,6 +345,7 @@ regulator-name = "vdd_1v8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + regulator-always-on; regulator-boot-on; regulator-state-mem { regulator-on-in-suspend; diff --git a/dts/src/arm/gr-peach-audiocamerashield.dtsi b/dts/src/arm/gr-peach-audiocamerashield.dtsi index e31a9e3c18..8d77579807 100644 --- a/dts/src/arm/gr-peach-audiocamerashield.dtsi +++ b/dts/src/arm/gr-peach-audiocamerashield.dtsi @@ -69,10 +69,6 @@ port { ceu_in: endpoint { - hsync-active = <1>; - vsync-active = <1>; - bus-width = <8>; - pclk-sample = <1>; remote-endpoint = <&mt9v111_out>; }; }; diff --git a/dts/src/arm/hip04.dtsi b/dts/src/arm/hip04.dtsi index 44044f2751..0f917b272f 100644 --- a/dts/src/arm/hip04.dtsi +++ b/dts/src/arm/hip04.dtsi @@ -277,10 +277,11 @@ clocks = <&clk_375m>; clock-names = "apb_pclk"; - port { - etb0_in_port: endpoint@0 { - slave-mode; - remote-endpoint = <&replicator0_out_port0>; + in-ports { + port { + etb0_in_port: endpoint@0 { + remote-endpoint = <&replicator0_out_port0>; + }; }; }; }; @@ -291,10 +292,11 @@ clocks = <&clk_375m>; clock-names = "apb_pclk"; - port { - etb1_in_port: endpoint@0 { - slave-mode; - remote-endpoint = <&replicator1_out_port0>; + in-ports { + port { + etb1_in_port: endpoint@0 { + remote-endpoint = <&replicator1_out_port0>; + }; }; }; }; @@ -305,10 +307,11 @@ clocks = <&clk_375m>; clock-names = "apb_pclk"; - port { - etb2_in_port: endpoint@0 { - slave-mode; - remote-endpoint = <&replicator2_out_port0>; + in-ports { + port { + etb2_in_port: endpoint@0 { + remote-endpoint = <&replicator2_out_port0>; + }; }; }; }; @@ -319,10 +322,11 @@ clocks = <&clk_375m>; clock-names = "apb_pclk"; - port { - etb3_in_port: endpoint@0 { - slave-mode; - remote-endpoint = <&replicator3_out_port0>; + in-ports { + port { + etb3_in_port: endpoint@0 { + remote-endpoint = <&replicator3_out_port0>; + }; }; }; }; @@ -333,10 +337,11 @@ clocks = <&clk_375m>; clock-names = "apb_pclk"; - port { - tpiu_in_port: endpoint@0 { - slave-mode; - remote-endpoint = <&funnel4_out_port0>; + in-ports { + port { + tpiu_in_port: endpoint@0 { + remote-endpoint = <&funnel4_out_port0>; + }; }; }; }; @@ -347,7 +352,7 @@ */ compatible = "arm,coresight-replicator"; - ports { + out-ports { #address-cells = <1>; #size-cells = <0>; @@ -365,12 +370,11 @@ remote-endpoint = <&funnel4_in_port0>; }; }; + }; - /* replicator input port */ - port@2 { - reg = <0>; + in-ports { + port { replicator0_in_port0: endpoint { - slave-mode; remote-endpoint = <&funnel0_out_port0>; }; }; @@ -383,7 +387,7 @@ */ compatible = "arm,coresight-replicator"; - ports { + out-ports { #address-cells = <1>; #size-cells = <0>; @@ -401,12 +405,11 @@ remote-endpoint = <&funnel4_in_port1>; }; }; + }; - /* replicator input port */ - port@2 { - reg = <0>; + in-ports { + port { replicator1_in_port0: endpoint { - slave-mode; remote-endpoint = <&funnel1_out_port0>; }; }; @@ -419,11 +422,10 @@ */ compatible = "arm,coresight-replicator"; - ports { + out-ports { #address-cells = <1>; #size-cells = <0>; - /* replicator output ports */ port@0 { reg = <0>; replicator2_out_port0: endpoint { @@ -437,12 +439,11 @@ remote-endpoint = <&funnel4_in_port2>; }; }; + }; - /* replicator input port */ - port@2 { - reg = <0>; + in-ports { + port { replicator2_in_port0: endpoint { - slave-mode; remote-endpoint = <&funnel2_out_port0>; }; }; @@ -455,11 +456,10 @@ */ compatible = "arm,coresight-replicator"; - ports { + out-ports { #address-cells = <1>; #size-cells = <0>; - /* replicator output ports */ port@0 { reg = <0>; replicator3_out_port0: endpoint { @@ -473,12 +473,11 @@ remote-endpoint = <&funnel4_in_port3>; }; }; + }; - /* replicator input port */ - port@2 { - reg = <0>; + in-ports { + port { replicator3_in_port0: endpoint { - slave-mode; remote-endpoint = <&funnel3_out_port0>; }; }; @@ -491,48 +490,43 @@ clocks = <&clk_375m>; clock-names = "apb_pclk"; - ports { - #address-cells = <1>; - #size-cells = <0>; - - /* funnel output port */ - port@0 { - reg = <0>; + out-ports { + port { funnel0_out_port0: endpoint { remote-endpoint = <&replicator0_in_port0>; }; }; + }; - /* funnel input ports */ - port@1 { + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { reg = <0>; funnel0_in_port0: endpoint { - slave-mode; remote-endpoint = <&ptm0_out_port>; }; }; - port@2 { + port@1 { reg = <1>; funnel0_in_port1: endpoint { - slave-mode; remote-endpoint = <&ptm1_out_port>; }; }; - port@3 { + port@2 { reg = <2>; funnel0_in_port2: endpoint { - slave-mode; remote-endpoint = <&ptm2_out_port>; }; }; - port@4 { + port@3 { reg = <3>; funnel0_in_port3: endpoint { - slave-mode; remote-endpoint = <&ptm3_out_port>; }; }; @@ -545,48 +539,43 @@ clocks = <&clk_375m>; clock-names = "apb_pclk"; - ports { - #address-cells = <1>; - #size-cells = <0>; - - /* funnel output port */ - port@0 { - reg = <0>; + out-ports { + port { funnel1_out_port0: endpoint { remote-endpoint = <&replicator1_in_port0>; }; }; + }; - /* funnel input ports */ - port@1 { + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { reg = <0>; funnel1_in_port0: endpoint { - slave-mode; remote-endpoint = <&ptm4_out_port>; }; }; - port@2 { + port@1 { reg = <1>; funnel1_in_port1: endpoint { - slave-mode; remote-endpoint = <&ptm5_out_port>; }; }; - port@3 { + port@2 { reg = <2>; funnel1_in_port2: endpoint { - slave-mode; remote-endpoint = <&ptm6_out_port>; }; }; - port@4 { + port@3 { reg = <3>; funnel1_in_port3: endpoint { - slave-mode; remote-endpoint = <&ptm7_out_port>; }; }; @@ -599,48 +588,43 @@ clocks = <&clk_375m>; clock-names = "apb_pclk"; - ports { - #address-cells = <1>; - #size-cells = <0>; - - /* funnel output port */ - port@0 { - reg = <0>; + out-ports { + port { funnel2_out_port0: endpoint { remote-endpoint = <&replicator2_in_port0>; }; }; + }; - /* funnel input ports */ - port@1 { + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { reg = <0>; funnel2_in_port0: endpoint { - slave-mode; remote-endpoint = <&ptm8_out_port>; }; }; - port@2 { + port@1 { reg = <1>; funnel2_in_port1: endpoint { - slave-mode; remote-endpoint = <&ptm9_out_port>; }; }; - port@3 { + port@2 { reg = <2>; funnel2_in_port2: endpoint { - slave-mode; remote-endpoint = <&ptm10_out_port>; }; }; - port@4 { + port@3 { reg = <3>; funnel2_in_port3: endpoint { - slave-mode; remote-endpoint = <&ptm11_out_port>; }; }; @@ -653,48 +637,43 @@ clocks = <&clk_375m>; clock-names = "apb_pclk"; - ports { - #address-cells = <1>; - #size-cells = <0>; - - /* funnel output port */ - port@0 { - reg = <0>; + out-ports { + port { funnel3_out_port0: endpoint { remote-endpoint = <&replicator3_in_port0>; }; }; + }; - /* funnel input ports */ - port@1 { + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { reg = <0>; funnel3_in_port0: endpoint { - slave-mode; remote-endpoint = <&ptm12_out_port>; }; }; - port@2 { + port@1 { reg = <1>; funnel3_in_port1: endpoint { - slave-mode; remote-endpoint = <&ptm13_out_port>; }; }; - port@3 { + port@2 { reg = <2>; funnel3_in_port2: endpoint { - slave-mode; remote-endpoint = <&ptm14_out_port>; }; }; - port@4 { + port@3 { reg = <3>; funnel3_in_port3: endpoint { - slave-mode; remote-endpoint = <&ptm15_out_port>; }; }; @@ -707,50 +686,45 @@ clocks = <&clk_375m>; clock-names = "apb_pclk"; - ports { - #address-cells = <1>; - #size-cells = <0>; - - /* funnel output port */ - port@0 { - reg = <0>; + out-ports { + port { funnel4_out_port0: endpoint { remote-endpoint = <&tpiu_in_port>; }; }; + }; - /* funnel input ports */ - port@1 { + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { reg = <0>; funnel4_in_port0: endpoint { - slave-mode; remote-endpoint = <&replicator0_out_port1>; }; }; - port@2 { + port@1 { reg = <1>; funnel4_in_port1: endpoint { - slave-mode; remote-endpoint = <&replicator1_out_port1>; }; }; - port@3 { + port@2 { reg = <2>; funnel4_in_port2: endpoint { - slave-mode; remote-endpoint = <&replicator2_out_port1>; }; }; - port@4 { + port@3 { reg = <3>; funnel4_in_port3: endpoint { - slave-mode; remote-endpoint = <&replicator3_out_port1>; }; @@ -765,9 +739,11 @@ clocks = <&clk_375m>; clock-names = "apb_pclk"; cpu = <&CPU0>; - port { - ptm0_out_port: endpoint { - remote-endpoint = <&funnel0_in_port0>; + out-ports { + port { + ptm0_out_port: endpoint { + remote-endpoint = <&funnel0_in_port0>; + }; }; }; }; @@ -779,9 +755,11 @@ clocks = <&clk_375m>; clock-names = "apb_pclk"; cpu = <&CPU1>; - port { - ptm1_out_port: endpoint { - remote-endpoint = <&funnel0_in_port1>; + out-ports { + port { + ptm1_out_port: endpoint { + remote-endpoint = <&funnel0_in_port1>; + }; }; }; }; @@ -793,9 +771,11 @@ clocks = <&clk_375m>; clock-names = "apb_pclk"; cpu = <&CPU2>; - port { - ptm2_out_port: endpoint { - remote-endpoint = <&funnel0_in_port2>; + out-ports { + port { + ptm2_out_port: endpoint { + remote-endpoint = <&funnel0_in_port2>; + }; }; }; }; @@ -807,9 +787,11 @@ clocks = <&clk_375m>; clock-names = "apb_pclk"; cpu = <&CPU3>; - port { - ptm3_out_port: endpoint { - remote-endpoint = <&funnel0_in_port3>; + out-ports { + port { + ptm3_out_port: endpoint { + remote-endpoint = <&funnel0_in_port3>; + }; }; }; }; @@ -821,9 +803,11 @@ clocks = <&clk_375m>; clock-names = "apb_pclk"; cpu = <&CPU4>; - port { - ptm4_out_port: endpoint { - remote-endpoint = <&funnel1_in_port0>; + out-ports { + port { + ptm4_out_port: endpoint { + remote-endpoint = <&funnel1_in_port0>; + }; }; }; }; @@ -835,9 +819,11 @@ clocks = <&clk_375m>; clock-names = "apb_pclk"; cpu = <&CPU5>; - port { - ptm5_out_port: endpoint { - remote-endpoint = <&funnel1_in_port1>; + out-ports { + port { + ptm5_out_port: endpoint { + remote-endpoint = <&funnel1_in_port1>; + }; }; }; }; @@ -849,9 +835,11 @@ clocks = <&clk_375m>; clock-names = "apb_pclk"; cpu = <&CPU6>; - port { - ptm6_out_port: endpoint { - remote-endpoint = <&funnel1_in_port2>; + out-ports { + port { + ptm6_out_port: endpoint { + remote-endpoint = <&funnel1_in_port2>; + }; }; }; }; @@ -863,9 +851,11 @@ clocks = <&clk_375m>; clock-names = "apb_pclk"; cpu = <&CPU7>; - port { - ptm7_out_port: endpoint { - remote-endpoint = <&funnel1_in_port3>; + out-ports { + port { + ptm7_out_port: endpoint { + remote-endpoint = <&funnel1_in_port3>; + }; }; }; }; @@ -877,9 +867,11 @@ clocks = <&clk_375m>; clock-names = "apb_pclk"; cpu = <&CPU8>; - port { - ptm8_out_port: endpoint { - remote-endpoint = <&funnel2_in_port0>; + out-ports { + port { + ptm8_out_port: endpoint { + remote-endpoint = <&funnel2_in_port0>; + }; }; }; }; @@ -890,9 +882,11 @@ clocks = <&clk_375m>; clock-names = "apb_pclk"; cpu = <&CPU9>; - port { - ptm9_out_port: endpoint { - remote-endpoint = <&funnel2_in_port1>; + out-ports { + port { + ptm9_out_port: endpoint { + remote-endpoint = <&funnel2_in_port1>; + }; }; }; }; @@ -904,9 +898,11 @@ clocks = <&clk_375m>; clock-names = "apb_pclk"; cpu = <&CPU10>; - port { - ptm10_out_port: endpoint { - remote-endpoint = <&funnel2_in_port2>; + out-ports { + port { + ptm10_out_port: endpoint { + remote-endpoint = <&funnel2_in_port2>; + }; }; }; }; @@ -918,9 +914,11 @@ clocks = <&clk_375m>; clock-names = "apb_pclk"; cpu = <&CPU11>; - port { - ptm11_out_port: endpoint { - remote-endpoint = <&funnel2_in_port3>; + out-ports { + port { + ptm11_out_port: endpoint { + remote-endpoint = <&funnel2_in_port3>; + }; }; }; }; @@ -932,9 +930,11 @@ clocks = <&clk_375m>; clock-names = "apb_pclk"; cpu = <&CPU12>; - port { - ptm12_out_port: endpoint { - remote-endpoint = <&funnel3_in_port0>; + out-ports { + port { + ptm12_out_port: endpoint { + remote-endpoint = <&funnel3_in_port0>; + }; }; }; }; @@ -946,9 +946,11 @@ clocks = <&clk_375m>; clock-names = "apb_pclk"; cpu = <&CPU13>; - port { - ptm13_out_port: endpoint { - remote-endpoint = <&funnel3_in_port1>; + out-ports { + port { + ptm13_out_port: endpoint { + remote-endpoint = <&funnel3_in_port1>; + }; }; }; }; @@ -960,9 +962,11 @@ clocks = <&clk_375m>; clock-names = "apb_pclk"; cpu = <&CPU14>; - port { - ptm14_out_port: endpoint { - remote-endpoint = <&funnel3_in_port2>; + out-ports { + port { + ptm14_out_port: endpoint { + remote-endpoint = <&funnel3_in_port2>; + }; }; }; }; @@ -974,9 +978,11 @@ clocks = <&clk_375m>; clock-names = "apb_pclk"; cpu = <&CPU15>; - port { - ptm15_out_port: endpoint { - remote-endpoint = <&funnel3_in_port3>; + out-ports { + port { + ptm15_out_port: endpoint { + remote-endpoint = <&funnel3_in_port3>; + }; }; }; }; diff --git a/dts/src/arm/imx1.dtsi b/dts/src/arm/imx1.dtsi index 3edc7b5550..b00ece16b8 100644 --- a/dts/src/arm/imx1.dtsi +++ b/dts/src/arm/imx1.dtsi @@ -164,7 +164,7 @@ reg = <0x00210000 0x10000>; ranges; - cspi1: cspi@213000 { + cspi1: spi@213000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx1-cspi"; @@ -186,7 +186,7 @@ status = "disabled"; }; - cspi2: cspi@219000 { + cspi2: spi@219000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx1-cspi"; diff --git a/dts/src/arm/imx23-evk.dts b/dts/src/arm/imx23-evk.dts index ad2ae25b7b..98efe1aeb2 100644 --- a/dts/src/arm/imx23-evk.dts +++ b/dts/src/arm/imx23-evk.dts @@ -58,7 +58,7 @@ status = "okay"; }; - ssp0: ssp@80010000 { + ssp0: spi@80010000 { compatible = "fsl,imx23-mmc"; pinctrl-names = "default"; pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>; diff --git a/dts/src/arm/imx23-olinuxino.dts b/dts/src/arm/imx23-olinuxino.dts index e9351774c6..31b1e3581a 100644 --- a/dts/src/arm/imx23-olinuxino.dts +++ b/dts/src/arm/imx23-olinuxino.dts @@ -25,7 +25,7 @@ apb@80000000 { apbh@80000000 { - ssp0: ssp@80010000 { + ssp0: spi@80010000 { compatible = "fsl,imx23-mmc"; pinctrl-names = "default"; pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>; @@ -59,7 +59,7 @@ }; }; - ssp1: ssp@80034000 { + ssp1: spi@80034000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx23-spi"; diff --git a/dts/src/arm/imx23-sansa.dts b/dts/src/arm/imx23-sansa.dts index 67de7863ad..faf701b2ad 100644 --- a/dts/src/arm/imx23-sansa.dts +++ b/dts/src/arm/imx23-sansa.dts @@ -55,7 +55,7 @@ apb@80000000 { apbh@80000000 { - ssp0: ssp@80010000 { + ssp0: spi@80010000 { compatible = "fsl,imx23-mmc"; pinctrl-names = "default"; pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>; @@ -65,7 +65,7 @@ status = "okay"; }; - ssp1: ssp@80034000 { + ssp1: spi@80034000 { compatible = "fsl,imx23-mmc"; pinctrl-names = "default"; pinctrl-0 = <&mmc1_8bit_pins_a>; diff --git a/dts/src/arm/imx23-stmp378x_devb.dts b/dts/src/arm/imx23-stmp378x_devb.dts index 95c7b918f6..2ff6cdf71a 100644 --- a/dts/src/arm/imx23-stmp378x_devb.dts +++ b/dts/src/arm/imx23-stmp378x_devb.dts @@ -22,7 +22,7 @@ apb@80000000 { apbh@80000000 { - ssp0: ssp@80010000 { + ssp0: spi@80010000 { compatible = "fsl,imx23-mmc"; pinctrl-names = "default"; pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>; diff --git a/dts/src/arm/imx23-xfi3.dts b/dts/src/arm/imx23-xfi3.dts index 9616e500b9..db53089fb7 100644 --- a/dts/src/arm/imx23-xfi3.dts +++ b/dts/src/arm/imx23-xfi3.dts @@ -54,7 +54,7 @@ apb@80000000 { apbh@80000000 { - ssp0: ssp@80010000 { + ssp0: spi@80010000 { compatible = "fsl,imx23-mmc"; pinctrl-names = "default"; pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>; @@ -64,7 +64,7 @@ status = "okay"; }; - ssp1: ssp@80034000 { + ssp1: spi@80034000 { compatible = "fsl,imx23-mmc"; pinctrl-names = "default"; pinctrl-0 = <&mmc1_4bit_pins_a>; diff --git a/dts/src/arm/imx23.dtsi b/dts/src/arm/imx23.dtsi index 71bfd2b156..ea259927ee 100644 --- a/dts/src/arm/imx23.dtsi +++ b/dts/src/arm/imx23.dtsi @@ -93,7 +93,7 @@ status = "disabled"; }; - ssp0: ssp@80010000 { + ssp0: spi@80010000 { reg = <0x80010000 0x2000>; interrupts = <15>; clocks = <&clks 33>; @@ -457,7 +457,7 @@ status = "disabled"; }; - ssp1: ssp@80034000 { + ssp1: spi@80034000 { reg = <0x80034000 0x2000>; interrupts = <2>; clocks = <&clks 33>; diff --git a/dts/src/arm/imx25.dtsi b/dts/src/arm/imx25.dtsi index 85c15ee632..b25309d26e 100644 --- a/dts/src/arm/imx25.dtsi +++ b/dts/src/arm/imx25.dtsi @@ -168,7 +168,7 @@ status = "disabled"; }; - spi1: cspi@43fa4000 { + spi1: spi@43fa4000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx25-cspi", "fsl,imx35-cspi"; @@ -209,7 +209,7 @@ reg = <0x50000000 0x40000>; ranges; - spi3: cspi@50004000 { + spi3: spi@50004000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx25-cspi", "fsl,imx35-cspi"; @@ -238,7 +238,7 @@ status = "disabled"; }; - spi2: cspi@50010000 { + spi2: spi@50010000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx25-cspi", "fsl,imx35-cspi"; diff --git a/dts/src/arm/imx27.dtsi b/dts/src/arm/imx27.dtsi index 753d88df16..151b0eb17d 100644 --- a/dts/src/arm/imx27.dtsi +++ b/dts/src/arm/imx27.dtsi @@ -209,7 +209,7 @@ status = "disabled"; }; - cspi1: cspi@1000e000 { + cspi1: spi@1000e000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx27-cspi"; @@ -221,7 +221,7 @@ status = "disabled"; }; - cspi2: cspi@1000f000 { + cspi2: spi@1000f000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx27-cspi"; @@ -373,7 +373,7 @@ status = "disabled"; }; - cspi3: cspi@10017000 { + cspi3: spi@10017000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx27-cspi"; diff --git a/dts/src/arm/imx28-apf28dev.dts b/dts/src/arm/imx28-apf28dev.dts index c4fadbc1b4..8df5ec4703 100644 --- a/dts/src/arm/imx28-apf28dev.dts +++ b/dts/src/arm/imx28-apf28dev.dts @@ -18,7 +18,7 @@ apb@80000000 { apbh@80000000 { - ssp0: ssp@80010000 { + ssp0: spi@80010000 { compatible = "fsl,imx28-mmc"; pinctrl-names = "default"; pinctrl-0 = <&mmc0_4bit_pins_a @@ -27,7 +27,7 @@ status = "okay"; }; - ssp2: ssp@80014000 { + ssp2: spi@80014000 { compatible = "fsl,imx28-spi"; pinctrl-names = "default"; pinctrl-0 = <&spi2_pins_a>; diff --git a/dts/src/arm/imx28-apx4devkit.dts b/dts/src/arm/imx28-apx4devkit.dts index 96faa53ba4..6c9b498305 100644 --- a/dts/src/arm/imx28-apx4devkit.dts +++ b/dts/src/arm/imx28-apx4devkit.dts @@ -18,7 +18,7 @@ status = "okay"; }; - ssp0: ssp@80010000 { + ssp0: spi@80010000 { compatible = "fsl,imx28-mmc"; pinctrl-names = "default"; pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_sck_cfg>; @@ -26,7 +26,7 @@ status = "okay"; }; - ssp2: ssp@80014000 { + ssp2: spi@80014000 { compatible = "fsl,imx28-mmc"; pinctrl-names = "default"; pinctrl-0 = <&mmc2_4bit_pins_apx4 &mmc2_sck_cfg_apx4>; diff --git a/dts/src/arm/imx28-cfa10036.dts b/dts/src/arm/imx28-cfa10036.dts index e54f5aba70..8337ca21e2 100644 --- a/dts/src/arm/imx28-cfa10036.dts +++ b/dts/src/arm/imx28-cfa10036.dts @@ -66,7 +66,7 @@ }; - ssp0: ssp@80010000 { + ssp0: spi@80010000 { compatible = "fsl,imx28-mmc"; pinctrl-names = "default"; pinctrl-0 = <&mmc0_4bit_pins_a diff --git a/dts/src/arm/imx28-duckbill-2-485.dts b/dts/src/arm/imx28-duckbill-2-485.dts index 97084e463d..f4f2b3d16c 100644 --- a/dts/src/arm/imx28-duckbill-2-485.dts +++ b/dts/src/arm/imx28-duckbill-2-485.dts @@ -25,7 +25,7 @@ apb@80000000 { apbh@80000000 { - ssp0: ssp@80010000 { + ssp0: spi@80010000 { compatible = "fsl,imx28-mmc"; pinctrl-names = "default"; pinctrl-0 = <&mmc0_8bit_pins_a @@ -36,7 +36,7 @@ non-removable; }; - ssp2: ssp@80014000 { + ssp2: spi@80014000 { compatible = "fsl,imx28-mmc"; pinctrl-names = "default"; pinctrl-0 = <&mmc2_4bit_pins_b diff --git a/dts/src/arm/imx28-duckbill-2-enocean.dts b/dts/src/arm/imx28-duckbill-2-enocean.dts index 22215337f7..71d0fcbc2d 100644 --- a/dts/src/arm/imx28-duckbill-2-enocean.dts +++ b/dts/src/arm/imx28-duckbill-2-enocean.dts @@ -26,7 +26,7 @@ apb@80000000 { apbh@80000000 { - ssp0: ssp@80010000 { + ssp0: spi@80010000 { compatible = "fsl,imx28-mmc"; pinctrl-names = "default"; pinctrl-0 = <&mmc0_8bit_pins_a @@ -37,7 +37,7 @@ non-removable; }; - ssp2: ssp@80014000 { + ssp2: spi@80014000 { compatible = "fsl,imx28-mmc"; pinctrl-names = "default"; pinctrl-0 = <&mmc2_4bit_pins_b diff --git a/dts/src/arm/imx28-duckbill-2-spi.dts b/dts/src/arm/imx28-duckbill-2-spi.dts index 13e7b134da..6580ec6e26 100644 --- a/dts/src/arm/imx28-duckbill-2-spi.dts +++ b/dts/src/arm/imx28-duckbill-2-spi.dts @@ -29,7 +29,7 @@ apb@80000000 { apbh@80000000 { - ssp0: ssp@80010000 { + ssp0: spi@80010000 { compatible = "fsl,imx28-mmc"; pinctrl-names = "default"; pinctrl-0 = <&mmc0_8bit_pins_a @@ -40,7 +40,7 @@ non-removable; }; - ssp2: ssp@80014000 { + ssp2: spi@80014000 { compatible = "fsl,imx28-spi"; pinctrl-names = "default"; pinctrl-0 = <&spi2_pins_a>; diff --git a/dts/src/arm/imx28-duckbill-2.dts b/dts/src/arm/imx28-duckbill-2.dts index 88556c93b0..693634edae 100644 --- a/dts/src/arm/imx28-duckbill-2.dts +++ b/dts/src/arm/imx28-duckbill-2.dts @@ -25,7 +25,7 @@ apb@80000000 { apbh@80000000 { - ssp0: ssp@80010000 { + ssp0: spi@80010000 { compatible = "fsl,imx28-mmc"; pinctrl-names = "default"; pinctrl-0 = <&mmc0_8bit_pins_a @@ -36,7 +36,7 @@ non-removable; }; - ssp2: ssp@80014000 { + ssp2: spi@80014000 { compatible = "fsl,imx28-mmc"; pinctrl-names = "default"; pinctrl-0 = <&mmc2_4bit_pins_b diff --git a/dts/src/arm/imx28-duckbill.dts b/dts/src/arm/imx28-duckbill.dts index f286bfe699..16f524428e 100644 --- a/dts/src/arm/imx28-duckbill.dts +++ b/dts/src/arm/imx28-duckbill.dts @@ -24,7 +24,7 @@ apb@80000000 { apbh@80000000 { - ssp0: ssp@80010000 { + ssp0: spi@80010000 { compatible = "fsl,imx28-mmc"; pinctrl-names = "default"; pinctrl-0 = <&mmc0_4bit_pins_a @@ -34,7 +34,7 @@ status = "okay"; }; - ssp2: ssp@80014000 { + ssp2: spi@80014000 { compatible = "fsl,imx28-spi"; pinctrl-names = "default"; pinctrl-0 = <&spi2_pins_a>; diff --git a/dts/src/arm/imx28-evk.dts b/dts/src/arm/imx28-evk.dts index 93ab5bdfe0..5778300f44 100644 --- a/dts/src/arm/imx28-evk.dts +++ b/dts/src/arm/imx28-evk.dts @@ -103,7 +103,7 @@ status = "okay"; }; - ssp0: ssp@80010000 { + ssp0: spi@80010000 { compatible = "fsl,imx28-mmc"; pinctrl-names = "default"; pinctrl-0 = <&mmc0_8bit_pins_a @@ -114,13 +114,13 @@ status = "okay"; }; - ssp1: ssp@80012000 { + ssp1: spi@80012000 { compatible = "fsl,imx28-mmc"; bus-width = <8>; wp-gpios = <&gpio0 28 0>; }; - ssp2: ssp@80014000 { + ssp2: spi@80014000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx28-spi"; diff --git a/dts/src/arm/imx28-m28cu3.dts b/dts/src/arm/imx28-m28cu3.dts index 3bb5ffc644..8883d36a51 100644 --- a/dts/src/arm/imx28-m28cu3.dts +++ b/dts/src/arm/imx28-m28cu3.dts @@ -41,7 +41,7 @@ }; }; - ssp0: ssp@80010000 { + ssp0: spi@80010000 { compatible = "fsl,imx28-mmc"; pinctrl-names = "default"; pinctrl-0 = <&mmc0_4bit_pins_a @@ -52,7 +52,7 @@ status = "okay"; }; - ssp2: ssp@80014000 { + ssp2: spi@80014000 { compatible = "fsl,imx28-mmc"; pinctrl-names = "default"; pinctrl-0 = <&mmc2_4bit_pins_a diff --git a/dts/src/arm/imx28-m28evk.dts b/dts/src/arm/imx28-m28evk.dts index 7d97a0ce74..893886d17b 100644 --- a/dts/src/arm/imx28-m28evk.dts +++ b/dts/src/arm/imx28-m28evk.dts @@ -18,7 +18,7 @@ apb@80000000 { apbh@80000000 { - ssp0: ssp@80010000 { + ssp0: spi@80010000 { compatible = "fsl,imx28-mmc"; pinctrl-names = "default"; pinctrl-0 = <&mmc0_8bit_pins_a @@ -30,7 +30,7 @@ status = "okay"; }; - ssp2: ssp@80014000 { + ssp2: spi@80014000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx28-spi"; diff --git a/dts/src/arm/imx28-sps1.dts b/dts/src/arm/imx28-sps1.dts index 2393e83979..ea9212f6ec 100644 --- a/dts/src/arm/imx28-sps1.dts +++ b/dts/src/arm/imx28-sps1.dts @@ -40,7 +40,7 @@ }; - ssp0: ssp@80010000 { + ssp0: spi@80010000 { compatible = "fsl,imx28-mmc"; pinctrl-names = "default"; pinctrl-0 = <&mmc0_4bit_pins_a>; @@ -48,7 +48,7 @@ status = "okay"; }; - ssp2: ssp@80014000 { + ssp2: spi@80014000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx28-spi"; diff --git a/dts/src/arm/imx28-ts4600.dts b/dts/src/arm/imx28-ts4600.dts index f8a09a8c2c..dccdd6bcd0 100644 --- a/dts/src/arm/imx28-ts4600.dts +++ b/dts/src/arm/imx28-ts4600.dts @@ -25,7 +25,7 @@ apb@80000000 { apbh@80000000 { - ssp0: ssp@80010000 { + ssp0: spi@80010000 { compatible = "fsl,imx28-mmc"; pinctrl-names = "default"; pinctrl-0 = <&mmc0_4bit_pins_a diff --git a/dts/src/arm/imx28.dtsi b/dts/src/arm/imx28.dtsi index 5107fdc482..2b7efb659f 100644 --- a/dts/src/arm/imx28.dtsi +++ b/dts/src/arm/imx28.dtsi @@ -117,7 +117,7 @@ status = "disabled"; }; - ssp0: ssp@80010000 { + ssp0: spi@80010000 { #address-cells = <1>; #size-cells = <0>; reg = <0x80010000 0x2000>; @@ -128,7 +128,7 @@ status = "disabled"; }; - ssp1: ssp@80012000 { + ssp1: spi@80012000 { #address-cells = <1>; #size-cells = <0>; reg = <0x80012000 0x2000>; @@ -139,7 +139,7 @@ status = "disabled"; }; - ssp2: ssp@80014000 { + ssp2: spi@80014000 { #address-cells = <1>; #size-cells = <0>; reg = <0x80014000 0x2000>; @@ -150,7 +150,7 @@ status = "disabled"; }; - ssp3: ssp@80016000 { + ssp3: spi@80016000 { #address-cells = <1>; #size-cells = <0>; reg = <0x80016000 0x2000>; diff --git a/dts/src/arm/imx31.dtsi b/dts/src/arm/imx31.dtsi index ca1419ca30..af7afccf5f 100644 --- a/dts/src/arm/imx31.dtsi +++ b/dts/src/arm/imx31.dtsi @@ -206,7 +206,7 @@ status = "disabled"; }; - spi2: cspi@50010000 { + spi2: spi@50010000 { compatible = "fsl,imx31-cspi"; reg = <0x50010000 0x4000>; interrupts = <13>; @@ -241,7 +241,7 @@ #clock-cells = <1>; }; - spi3: cspi@53f84000 { + spi3: spi@53f84000 { compatible = "fsl,imx31-cspi"; reg = <0x53f84000 0x4000>; interrupts = <17>; diff --git a/dts/src/arm/imx35.dtsi b/dts/src/arm/imx35.dtsi index 1c50b785ca..a1c3d28e87 100644 --- a/dts/src/arm/imx35.dtsi +++ b/dts/src/arm/imx35.dtsi @@ -133,7 +133,7 @@ status = "disabled"; }; - spi1: cspi@43fa4000 { + spi1: spi@43fa4000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx35-cspi"; @@ -174,7 +174,7 @@ status = "disabled"; }; - spi2: cspi@50010000 { + spi2: spi@50010000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx35-cspi"; diff --git a/dts/src/arm/imx50.dtsi b/dts/src/arm/imx50.dtsi index 7fae2ffb76..95b7fba583 100644 --- a/dts/src/arm/imx50.dtsi +++ b/dts/src/arm/imx50.dtsi @@ -140,7 +140,7 @@ status = "disabled"; }; - ecspi1: ecspi@50010000 { + ecspi1: spi@50010000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx50-ecspi", "fsl,imx51-ecspi"; @@ -403,7 +403,7 @@ status = "disabled"; }; - ecspi2: ecspi@63fac000 { + ecspi2: spi@63fac000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx50-ecspi", "fsl,imx51-ecspi"; @@ -426,7 +426,7 @@ fsl,sdma-ram-script-name = "imx/sdma/sdma-imx50.bin"; }; - cspi: cspi@63fc0000 { + cspi: spi@63fc0000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx50-cspi", "fsl,imx35-cspi"; diff --git a/dts/src/arm/imx51-babbage.dts b/dts/src/arm/imx51-babbage.dts index ba60b0cb3c..35ee1b4247 100644 --- a/dts/src/arm/imx51-babbage.dts +++ b/dts/src/arm/imx51-babbage.dts @@ -204,6 +204,7 @@ reg = <0>; interrupt-parent = <&gpio1>; interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; + fsl,mc13xxx-uses-adc; fsl,mc13xxx-uses-rtc; regulators { diff --git a/dts/src/arm/imx51-zii-rdu1.dts b/dts/src/arm/imx51-zii-rdu1.dts index 469cce2c03..e45a15ceb9 100644 --- a/dts/src/arm/imx51-zii-rdu1.dts +++ b/dts/src/arm/imx51-zii-rdu1.dts @@ -508,7 +508,7 @@ }; ds1341: rtc@68 { - compatible = "maxim,ds1341"; + compatible = "dallas,ds1341"; reg = <0x68>; }; diff --git a/dts/src/arm/imx51-zii-scu2-mezz.dts b/dts/src/arm/imx51-zii-scu2-mezz.dts index 26cf08549d..243d1c8cab 100644 --- a/dts/src/arm/imx51-zii-scu2-mezz.dts +++ b/dts/src/arm/imx51-zii-scu2-mezz.dts @@ -342,6 +342,14 @@ vcc-supply = <&vusb2_reg>; }; +&vpu { + status = "disabled"; +}; + +&wdog1 { + status = "disabled"; +}; + &iomuxc { pinctrl_ecspi1: ecspi1grp { fsl,pins = < diff --git a/dts/src/arm/imx51-zii-scu3-esb.dts b/dts/src/arm/imx51-zii-scu3-esb.dts index e6ebac8f43..14b2077781 100644 --- a/dts/src/arm/imx51-zii-scu3-esb.dts +++ b/dts/src/arm/imx51-zii-scu3-esb.dts @@ -350,6 +350,10 @@ vcc-supply = <&vusb2_reg>; }; +&vpu { + status = "disabled"; +}; + &wdog1 { status = "disabled"; }; diff --git a/dts/src/arm/imx51.dtsi b/dts/src/arm/imx51.dtsi index 5c4ba91e43..67d4627150 100644 --- a/dts/src/arm/imx51.dtsi +++ b/dts/src/arm/imx51.dtsi @@ -197,7 +197,7 @@ status = "disabled"; }; - ecspi1: ecspi@70010000 { + ecspi1: spi@70010000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx51-ecspi"; @@ -464,7 +464,7 @@ status = "disabled"; }; - ecspi2: ecspi@83fac000 { + ecspi2: spi@83fac000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx51-ecspi"; @@ -487,7 +487,7 @@ fsl,sdma-ram-script-name = "imx/sdma/sdma-imx51.bin"; }; - cspi: cspi@83fc0000 { + cspi: spi@83fc0000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx51-cspi", "fsl,imx35-cspi"; @@ -608,7 +608,7 @@ status = "disabled"; }; - vpu@83ff4000 { + vpu: vpu@83ff4000 { compatible = "fsl,imx51-vpu", "cnm,codahx4"; reg = <0x83ff4000 0x1000>; interrupts = <9>; diff --git a/dts/src/arm/imx53-ppd.dts b/dts/src/arm/imx53-ppd.dts index cdb90bee7b..b560ff8845 100644 --- a/dts/src/arm/imx53-ppd.dts +++ b/dts/src/arm/imx53-ppd.dts @@ -319,7 +319,6 @@ &ecspi2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi2>; - num-chipselects = <1>; cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>; status = "okay"; diff --git a/dts/src/arm/imx53.dtsi b/dts/src/arm/imx53.dtsi index 6386185ae2..207eb557c9 100644 --- a/dts/src/arm/imx53.dtsi +++ b/dts/src/arm/imx53.dtsi @@ -259,7 +259,7 @@ status = "disabled"; }; - ecspi1: ecspi@50010000 { + ecspi1: spi@50010000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi"; @@ -684,7 +684,7 @@ status = "disabled"; }; - ecspi2: ecspi@63fac000 { + ecspi2: spi@63fac000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi"; @@ -707,7 +707,7 @@ fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin"; }; - cspi: cspi@63fc0000 { + cspi: spi@63fc0000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx53-cspi", "fsl,imx35-cspi"; diff --git a/dts/src/arm/imx6dl-colibri-eval-v3.dts b/dts/src/arm/imx6dl-colibri-eval-v3.dts index 9de45a7173..d08e040279 100644 --- a/dts/src/arm/imx6dl-colibri-eval-v3.dts +++ b/dts/src/arm/imx6dl-colibri-eval-v3.dts @@ -146,7 +146,7 @@ &ecspi4 { status = "okay"; - mcp251x0: mcp251x@1 { + mcp251x0: mcp251x@0 { compatible = "microchip,mcp2515"; reg = <0>; clocks = <&clk16m>; diff --git a/dts/src/arm/imx6dl-icore-mipi.dts b/dts/src/arm/imx6dl-icore-mipi.dts index bf53f0552a..e43bccb78a 100644 --- a/dts/src/arm/imx6dl-icore-mipi.dts +++ b/dts/src/arm/imx6dl-icore-mipi.dts @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// SPDX-License-Identifier: GPL-2.0 OR X11 /* * Copyright (C) 2018 Engicam S.r.l. * Copyright (C) 2018 Amarula Solutions B.V. diff --git a/dts/src/arm/imx6dl-icore-rqs.dts b/dts/src/arm/imx6dl-icore-rqs.dts index 1281bc39b7..73d710d34b 100644 --- a/dts/src/arm/imx6dl-icore-rqs.dts +++ b/dts/src/arm/imx6dl-icore-rqs.dts @@ -1,43 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 /* * Copyright (C) 2016 Amarula Solutions B.V. * Copyright (C) 2016 Engicam S.r.l. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/dts/src/arm/imx6dl-icore.dts b/dts/src/arm/imx6dl-icore.dts index 971f9fc39c..80fa60607a 100644 --- a/dts/src/arm/imx6dl-icore.dts +++ b/dts/src/arm/imx6dl-icore.dts @@ -1,43 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 /* * Copyright (C) 2016 Amarula Solutions B.V. * Copyright (C) 2016 Engicam S.r.l. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/dts/src/arm/imx6dl-riotboard.dts b/dts/src/arm/imx6dl-riotboard.dts index dd3226fe5e..8e51491e68 100644 --- a/dts/src/arm/imx6dl-riotboard.dts +++ b/dts/src/arm/imx6dl-riotboard.dts @@ -84,6 +84,10 @@ status = "okay"; }; +&clks { + fsl,pmic-stby-poweroff; +}; + &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; @@ -164,6 +168,7 @@ reg = <0x08>; interrupt-parent = <&gpio5>; interrupts = <16 8>; + fsl,pmic-stby-poweroff; regulators { reg_vddcore: sw1ab { /* VDDARM_IN */ diff --git a/dts/src/arm/imx6q-apalis-eval.dts b/dts/src/arm/imx6q-apalis-eval.dts index 707ac9a461..0edd3043d9 100644 --- a/dts/src/arm/imx6q-apalis-eval.dts +++ b/dts/src/arm/imx6q-apalis-eval.dts @@ -196,6 +196,8 @@ }; &pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reset_moci>; /* active-high meaning opposite of regular PERST# active-low polarity */ reset-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>; reset-gpio-active-high; diff --git a/dts/src/arm/imx6q-apalis-ixora-v1.1.dts b/dts/src/arm/imx6q-apalis-ixora-v1.1.dts index 4e1c8feaef..b94bb687be 100644 --- a/dts/src/arm/imx6q-apalis-ixora-v1.1.dts +++ b/dts/src/arm/imx6q-apalis-ixora-v1.1.dts @@ -196,6 +196,8 @@ }; &pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reset_moci>; /* active-high meaning opposite of regular PERST# active-low polarity */ reset-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>; reset-gpio-active-high; diff --git a/dts/src/arm/imx6q-apalis-ixora.dts b/dts/src/arm/imx6q-apalis-ixora.dts index 469e3d0e28..302fd6adc8 100644 --- a/dts/src/arm/imx6q-apalis-ixora.dts +++ b/dts/src/arm/imx6q-apalis-ixora.dts @@ -200,6 +200,8 @@ }; &pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reset_moci>; /* active-high meaning opposite of regular PERST# active-low polarity */ reset-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>; reset-gpio-active-high; diff --git a/dts/src/arm/imx6q-icore-mipi.dts b/dts/src/arm/imx6q-icore-mipi.dts index 95b2efda17..d51745268d 100644 --- a/dts/src/arm/imx6q-icore-mipi.dts +++ b/dts/src/arm/imx6q-icore-mipi.dts @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// SPDX-License-Identifier: GPL-2.0 OR X11 /* * Copyright (C) 2017 Engicam S.r.l. * Copyright (C) 2017 Amarula Solutions B.V. @@ -8,10 +8,10 @@ /dts-v1/; #include "imx6q.dtsi" -#include "imx6qdl-icore.dtsi" +#include "imx6qdl-icore-1.5.dtsi" / { - model = "Engicam i.CoreM6 Quad/Dual MIPI Starter Kit"; + model = "Engicam i.CoreM6 1.5 Quad/Dual MIPI Starter Kit"; compatible = "engicam,imx6-icore", "fsl,imx6q"; }; diff --git a/dts/src/arm/imx6q-icore-ofcap10.dts b/dts/src/arm/imx6q-icore-ofcap10.dts index 49b60ca20e..81cc346dd1 100644 --- a/dts/src/arm/imx6q-icore-ofcap10.dts +++ b/dts/src/arm/imx6q-icore-ofcap10.dts @@ -1,43 +1,7 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (C) 2016 Amarula Solutions B.V. * Copyright (C) 2016 Engicam S.r.l. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/dts/src/arm/imx6q-icore-ofcap12.dts b/dts/src/arm/imx6q-icore-ofcap12.dts index 6e27c8143f..241811c52b 100644 --- a/dts/src/arm/imx6q-icore-ofcap12.dts +++ b/dts/src/arm/imx6q-icore-ofcap12.dts @@ -1,43 +1,7 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (C) 2016 Amarula Solutions B.V. * Copyright (C) 2016 Engicam S.r.l. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/dts/src/arm/imx6q-icore-rqs.dts b/dts/src/arm/imx6q-icore-rqs.dts index b81f48c6a8..cf6ba724f4 100644 --- a/dts/src/arm/imx6q-icore-rqs.dts +++ b/dts/src/arm/imx6q-icore-rqs.dts @@ -1,42 +1,7 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (C) 2015 Amarula Solutions B.V. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. + * Copyright (C) 2015 Engicam S.r.l. */ /dts-v1/; diff --git a/dts/src/arm/imx6q-icore.dts b/dts/src/arm/imx6q-icore.dts index 5613dd9dc4..fe28c3cf54 100644 --- a/dts/src/arm/imx6q-icore.dts +++ b/dts/src/arm/imx6q-icore.dts @@ -1,43 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 /* * Copyright (C) 2016 Amarula Solutions B.V. * Copyright (C) 2016 Engicam S.r.l. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/dts/src/arm/imx6q.dtsi b/dts/src/arm/imx6q.dtsi index 0193ee6fe9..8381d24eff 100644 --- a/dts/src/arm/imx6q.dtsi +++ b/dts/src/arm/imx6q.dtsi @@ -163,7 +163,7 @@ aips-bus@2000000 { /* AIPS1 */ spba-bus@2000000 { - ecspi5: ecspi@2018000 { + ecspi5: spi@2018000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi"; diff --git a/dts/src/arm/imx6qdl-apalis.dtsi b/dts/src/arm/imx6qdl-apalis.dtsi index 05f07ea3e8..3dc99dd8dd 100644 --- a/dts/src/arm/imx6qdl-apalis.dtsi +++ b/dts/src/arm/imx6qdl-apalis.dtsi @@ -482,10 +482,6 @@ }; &iomuxc { - /* pins used on module */ - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_reset_moci>; - pinctrl_apalis_gpio1: gpio2io04grp { fsl,pins = < MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x130b0 diff --git a/dts/src/arm/imx6qdl-icore-1.5.dtsi b/dts/src/arm/imx6qdl-icore-1.5.dtsi new file mode 100644 index 0000000000..d91d46b589 --- /dev/null +++ b/dts/src/arm/imx6qdl-icore-1.5.dtsi @@ -0,0 +1,34 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2018 Jacopo Mondi <jacopo@jmondi.org> + */ + +#include "imx6qdl-icore.dtsi" + +&iomuxc { + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0 + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0b0 + MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0 + MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0 + MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0 + MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0 + MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0 + >; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-reset-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>; + clocks = <&clks IMX6QDL_CLK_ENET>, + <&clks IMX6QDL_CLK_ENET>, + <&clks IMX6QDL_CLK_ENET_REF>; + phy-mode = "rmii"; + status = "okay"; +}; diff --git a/dts/src/arm/imx6qdl-icore-rqs.dtsi b/dts/src/arm/imx6qdl-icore-rqs.dtsi index acc3b11fba..ba93026ece 100644 --- a/dts/src/arm/imx6qdl-icore-rqs.dtsi +++ b/dts/src/arm/imx6qdl-icore-rqs.dtsi @@ -1,42 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 /* * Copyright (C) 2015 Amarula Solutions B.V. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. + * Copyright (C) 2015 Engicam S.r.l. */ #include <dt-bindings/gpio/gpio.h> @@ -316,7 +281,7 @@ }; &iomuxc { - pinctrl_audmux: audmux { + pinctrl_audmux: audmuxgrp { fsl,pins = < MX6QDL_PAD_DISP0_DAT20__AUD4_TXC 0x130b0 MX6QDL_PAD_DISP0_DAT21__AUD4_TXD 0x110b0 diff --git a/dts/src/arm/imx6qdl-icore.dtsi b/dts/src/arm/imx6qdl-icore.dtsi index 9ce9937761..84d03c65f4 100644 --- a/dts/src/arm/imx6qdl-icore.dtsi +++ b/dts/src/arm/imx6qdl-icore.dtsi @@ -1,43 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 /* * Copyright (C) 2016 Amarula Solutions B.V. * Copyright (C) 2016 Engicam S.r.l. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/gpio/gpio.h> @@ -310,7 +274,7 @@ }; &iomuxc { - pinctrl_audmux: audmux { + pinctrl_audmux: audmuxgrp { fsl,pins = < MX6QDL_PAD_DISP0_DAT20__AUD4_TXC 0x130b0 MX6QDL_PAD_DISP0_DAT21__AUD4_TXD 0x110b0 @@ -349,7 +313,7 @@ >; }; - pinctrl_gpmi_nand: gpmi-nand { + pinctrl_gpmi_nand: gpminandgrp { fsl,pins = < MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 diff --git a/dts/src/arm/imx6qdl-sabreauto.dtsi b/dts/src/arm/imx6qdl-sabreauto.dtsi index 9f11f1fcc3..a6dc5c42c6 100644 --- a/dts/src/arm/imx6qdl-sabreauto.dtsi +++ b/dts/src/arm/imx6qdl-sabreauto.dtsi @@ -4,6 +4,7 @@ // Copyright 2011 Linaro Ltd. #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> / { chosen { @@ -25,6 +26,47 @@ }; }; + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; + + home { + label = "Home"; + gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; + linux,code = <KEY_HOME>; + wakeup-source; + }; + + back { + label = "Back"; + gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; + linux,code = <KEY_BACK>; + wakeup-source; + }; + + program { + label = "Program"; + gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + linux,code = <KEY_PROGRAM>; + wakeup-source; + }; + + volume-up { + label = "Volume Up"; + gpios = <&gpio2 15 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + wakeup-source; + }; + + volume-down { + label = "Volume Down"; + gpios = <&gpio5 14 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEDOWN>; + wakeup-source; + }; + }; + clocks { codec_osc: anaclk2 { compatible = "fixed-clock"; @@ -375,6 +417,15 @@ VLC-supply = <®_audio>; }; + touchscreen@4 { + compatible = "eeti,egalax_ts"; + reg = <0x04>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_egalax_int>; + interrupt-parent = <&gpio2>; + interrupts = <28 IRQ_TYPE_EDGE_FALLING>; + wakeup-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>; + }; }; &i2c3 { @@ -410,6 +461,12 @@ >; }; + pinctrl_egalax_int: egalax-intgrp { + fsl,pins = < + MX6QDL_PAD_EIM_EB0__GPIO2_IO28 0xb0b1 + >; + }; + pinctrl_enet: enetgrp { fsl,pins = < MX6QDL_PAD_KEY_COL1__ENET_MDIO 0x1b0b0 @@ -446,6 +503,16 @@ >; }; + pinctrl_gpio_keys: gpiokeysgrp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__GPIO1_IO11 0x1b0b0 + MX6QDL_PAD_SD2_DAT3__GPIO1_IO12 0x1b0b0 + MX6QDL_PAD_SD4_DAT4__GPIO2_IO12 0x1b0b0 + MX6QDL_PAD_SD4_DAT7__GPIO2_IO15 0x1b0b0 + MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14 0x1b0b0 + >; + }; + pinctrl_gpio_leds: gpioledsgrp { fsl,pins = < MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15 0x80000000 diff --git a/dts/src/arm/imx6qdl-wandboard.dtsi b/dts/src/arm/imx6qdl-wandboard.dtsi index 381bf61fcd..b7d5fb4214 100644 --- a/dts/src/arm/imx6qdl-wandboard.dtsi +++ b/dts/src/arm/imx6qdl-wandboard.dtsi @@ -8,6 +8,10 @@ #include <dt-bindings/gpio/gpio.h> / { + chosen { + stdout-path = &uart1; + }; + sound { compatible = "fsl,imx6-wandboard-sgtl5000", "fsl,imx-audio-sgtl5000"; diff --git a/dts/src/arm/imx6qdl-zii-rdu2.dtsi b/dts/src/arm/imx6qdl-zii-rdu2.dtsi index 7fff3717cf..85e79a33bc 100644 --- a/dts/src/arm/imx6qdl-zii-rdu2.dtsi +++ b/dts/src/arm/imx6qdl-zii-rdu2.dtsi @@ -813,6 +813,10 @@ status = "okay"; }; +&snvs_rtc { + status = "disabled"; +}; + &ssi1 { status = "okay"; }; diff --git a/dts/src/arm/imx6qdl.dtsi b/dts/src/arm/imx6qdl.dtsi index 61d2d26afb..e4daf15088 100644 --- a/dts/src/arm/imx6qdl.dtsi +++ b/dts/src/arm/imx6qdl.dtsi @@ -317,7 +317,7 @@ status = "disabled"; }; - ecspi1: ecspi@2008000 { + ecspi1: spi@2008000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi"; @@ -331,7 +331,7 @@ status = "disabled"; }; - ecspi2: ecspi@200c000 { + ecspi2: spi@200c000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi"; @@ -345,7 +345,7 @@ status = "disabled"; }; - ecspi3: ecspi@2010000 { + ecspi3: spi@2010000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi"; @@ -359,7 +359,7 @@ status = "disabled"; }; - ecspi4: ecspi@2014000 { + ecspi4: spi@2014000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi"; diff --git a/dts/src/arm/imx6sl.dtsi b/dts/src/arm/imx6sl.dtsi index 7a4f5dace9..7a3ae7160c 100644 --- a/dts/src/arm/imx6sl.dtsi +++ b/dts/src/arm/imx6sl.dtsi @@ -168,7 +168,7 @@ status = "disabled"; }; - ecspi1: ecspi@2008000 { + ecspi1: spi@2008000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi"; @@ -180,7 +180,7 @@ status = "disabled"; }; - ecspi2: ecspi@200c000 { + ecspi2: spi@200c000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi"; @@ -192,7 +192,7 @@ status = "disabled"; }; - ecspi3: ecspi@2010000 { + ecspi3: spi@2010000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi"; @@ -204,7 +204,7 @@ status = "disabled"; }; - ecspi4: ecspi@2014000 { + ecspi4: spi@2014000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi"; diff --git a/dts/src/arm/imx6sll.dtsi b/dts/src/arm/imx6sll.dtsi index 000e6136a9..ed9a980bce 100644 --- a/dts/src/arm/imx6sll.dtsi +++ b/dts/src/arm/imx6sll.dtsi @@ -375,10 +375,12 @@ reg = <0x0209c000 0x4000>; interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_GPIO1>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 0 94 7>, <&iomuxc 7 25 25>; }; gpio2: gpio@20a0000 { @@ -386,10 +388,12 @@ reg = <0x020a0000 0x4000>; interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_GPIO2>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 0 50 32>; }; gpio3: gpio@20a4000 { @@ -397,10 +401,14 @@ reg = <0x020a4000 0x4000>; interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_GPIO3>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 0 82 12>, <&iomuxc 12 103 4>, + <&iomuxc 16 101 2>, <&iomuxc 18 5 1>, + <&iomuxc 21 6 11>; }; gpio4: gpio@20a8000 { @@ -408,10 +416,20 @@ reg = <0x020a8000 0x4000>; interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_GPIO4>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 0 17 8>, <&iomuxc 8 107 8>, + <&iomuxc 16 151 1>, <&iomuxc 17 149 1>, + <&iomuxc 18 146 1>, <&iomuxc 19 144 1>, + <&iomuxc 20 142 1>, <&iomuxc 21 143 1>, + <&iomuxc 22 150 1>, <&iomuxc 23 148 1>, + <&iomuxc 24 147 1>, <&iomuxc 25 145 1>, + <&iomuxc 26 152 1>, <&iomuxc 27 125 1>, + <&iomuxc 28 131 1>, <&iomuxc 29 134 1>, + <&iomuxc 30 129 1>, <&iomuxc 31 133 1>; }; gpio5: gpio@20ac000 { @@ -419,10 +437,22 @@ reg = <0x020ac000 0x4000>; interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_GPIO5>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 0 135 1>, <&iomuxc 1 128 1>, + <&iomuxc 2 132 1>, <&iomuxc 3 130 1>, + <&iomuxc 4 127 1>, <&iomuxc 5 126 1>, + <&iomuxc 6 120 1>, <&iomuxc 7 123 1>, + <&iomuxc 8 118 1>, <&iomuxc 9 122 1>, + <&iomuxc 10 124 1>, <&iomuxc 11 117 1>, + <&iomuxc 12 121 1>, <&iomuxc 13 119 1>, + <&iomuxc 14 116 1>, <&iomuxc 15 115 1>, + <&iomuxc 16 140 2>, <&iomuxc 18 136 1>, + <&iomuxc 19 138 1>, <&iomuxc 20 139 1>, + <&iomuxc 21 137 1>; }; gpio6: gpio@20b0000 { @@ -430,6 +460,7 @@ reg = <0x020b0000 0x4000>; interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_GPIO6>; gpio-controller; #gpio-cells = <2>; interrupt-controller; diff --git a/dts/src/arm/imx6sx-sdb.dtsi b/dts/src/arm/imx6sx-sdb.dtsi index f8f31872fa..53b3408b5f 100644 --- a/dts/src/arm/imx6sx-sdb.dtsi +++ b/dts/src/arm/imx6sx-sdb.dtsi @@ -40,12 +40,14 @@ label = "Volume Up"; gpios = <&gpio1 18 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; + wakeup-source; }; volume-down { label = "Volume Down"; gpios = <&gpio1 19 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEDOWN>; + wakeup-source; }; }; diff --git a/dts/src/arm/imx6sx.dtsi b/dts/src/arm/imx6sx.dtsi index 844caa3936..95a3c1cb87 100644 --- a/dts/src/arm/imx6sx.dtsi +++ b/dts/src/arm/imx6sx.dtsi @@ -268,7 +268,7 @@ status = "disabled"; }; - ecspi1: ecspi@2008000 { + ecspi1: spi@2008000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi"; @@ -280,7 +280,7 @@ status = "disabled"; }; - ecspi2: ecspi@200c000 { + ecspi2: spi@200c000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi"; @@ -292,7 +292,7 @@ status = "disabled"; }; - ecspi3: ecspi@2010000 { + ecspi3: spi@2010000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi"; @@ -304,7 +304,7 @@ status = "disabled"; }; - ecspi4: ecspi@2014000 { + ecspi4: spi@2014000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi"; @@ -1079,7 +1079,7 @@ status = "disabled"; }; - qspi1: qspi@21e0000 { + qspi1: spi@21e0000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6sx-qspi"; @@ -1092,7 +1092,7 @@ status = "disabled"; }; - qspi2: qspi@21e4000 { + qspi2: spi@21e4000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6sx-qspi"; @@ -1273,7 +1273,7 @@ status = "disabled"; }; - ecspi5: ecspi@228c000 { + ecspi5: spi@228c000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi"; diff --git a/dts/src/arm/imx6ul-ccimx6ulsbcpro.dts b/dts/src/arm/imx6ul-ccimx6ulsbcpro.dts new file mode 100644 index 0000000000..11966d12af --- /dev/null +++ b/dts/src/arm/imx6ul-ccimx6ulsbcpro.dts @@ -0,0 +1,390 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Digi International's ConnectCore6UL SBC Pro board device tree source + * + * Copyright 2018 Digi International, Inc. + * + */ + +/dts-v1/; +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include "imx6ul.dtsi" +#include "imx6ul-ccimx6ulsom.dtsi" + +/ { + model = "Digi International ConnectCore 6UL SBC Pro."; + compatible = "digi,ccimx6ulsbcpro", "digi,ccimx6ulsom", "fsl,imx6ul"; + + lcd_backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm5 0 50000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + status = "okay"; + }; + + reg_usb_otg1_vbus: regulator-usb-otg1 { + compatible = "regulator-fixed"; + regulator-name = "usb_otg1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&adc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc1>; + status = "okay"; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + xceiver-supply = <&ext_3v3>; + status = "okay"; +}; + +/* CAN2 is multiplexed with UART2 RTS/CTS */ +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + xceiver-supply = <&ext_3v3>; + status = "disabled"; +}; + +&ecspi1 { + cs-gpios = <&gpio3 26 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1_master>; + status = "okay"; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1>; + phy-mode = "rmii"; + phy-handle = <ðphy0>; + status = "okay"; +}; + +&fec2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet2 &pinctrl_enet2_mdio>; + phy-mode = "rmii"; + phy-handle = <ðphy1>; + phy-reset-gpios = <&gpio5 6 GPIO_ACTIVE_LOW>; + phy-reset-duration = <26>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + smsc,disable-energy-detect; + reg = <0>; + }; + + ethphy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + smsc,disable-energy-detect; + reg = <1>; + }; + }; +}; + +&gpio5 { + emmc-usd-mux { + gpio-hog; + gpios = <1 GPIO_ACTIVE_LOW>; + output-high; + }; +}; + +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcdif_dat0_17 + &pinctrl_lcdif_clken + &pinctrl_lcdif_hvsync>; + lcd-supply = <&ldo4_ext>; /* BU90T82 LVDS bridge power */ + status = "okay"; +}; + +&ldo4_ext { + regulator-max-microvolt = <1800000>; +}; + +&pwm1 { + status = "okay"; +}; + +&pwm2 { + status = "okay"; +}; + +&pwm3 { + status = "okay"; +}; + +&pwm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm4>; + status = "okay"; +}; + +&pwm5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm5>; + status = "okay"; +}; + +&pwm6 { + status = "okay"; +}; + +&pwm7 { + status = "okay"; +}; + +&pwm8 { + status = "okay"; +}; + +&sai2 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pinctrl_sai2>; + pinctrl-1 = <&pinctrl_sai2_sleep>; + assigned-clocks = <&clks IMX6UL_CLK_SAI2_SEL>, + <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>, + <&clks IMX6UL_CLK_SAI2>; + assigned-clock-rates = <0>, <786432000>, <12288000>; + assigned-clock-parents = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>; + status = "okay"; +}; + +/* UART2 RTS/CTS muxed with CAN2 */ +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2_4wires>; + uart-has-rtscts; + status = "okay"; +}; + +/* UART3 RTS/CTS muxed with CAN 1 */ +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3_2wires>; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + status = "okay"; +}; + +&usbotg1 { + dr_mode = "otg"; + vbus-supply = <®_usb_otg1_vbus>; + pinctrl-0 = <&pinctrl_usbotg1>; + status = "okay"; +}; + +&usbotg2 { + dr_mode = "host"; + disable-over-current; + status = "okay"; +}; + +/* USDHC2 (microSD conflicts with eMMC) */ +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + no-1-8-v; + broken-cd; /* no carrier detect line (use polling) */ + status = "okay"; +}; + +&iomuxc { + pinctrl_adc1: adc1grp { + fsl,pins = < + /* EXP_GPIO_2 -> GPIO1_3/ADC1_IN3 */ + MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0xb0 + >; + }; + + pinctrl_ecspi1_master: ecspi1grp1 { + fsl,pins = < + MX6UL_PAD_LCD_DATA20__ECSPI1_SCLK 0x10b0 + MX6UL_PAD_LCD_DATA22__ECSPI1_MOSI 0x10b0 + MX6UL_PAD_LCD_DATA23__ECSPI1_MISO 0x10b0 + MX6UL_PAD_LCD_DATA21__GPIO3_IO26 0x10b0 + >; + }; + + pinctrl_enet1: enet1grp { + fsl,pins = < + MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0 + MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x1b0b0 + MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0 + MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0 + MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0 + MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0 + MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0 + MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x40017051 + >; + }; + + pinctrl_enet2: enet2grp { + fsl,pins = < + MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x1b0b0 + MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER 0x1b0b0 + MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x1b0b0 + MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x1b0b0 + MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x1b0b0 + MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b0b0 + MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b0b0 + MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x40017051 + >; + }; + + pinctrl_enet2_mdio: mdioenet2grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO07__ENET2_MDC 0x1b0b0 + MX6UL_PAD_GPIO1_IO06__ENET2_MDIO 0x1b0b0 + >; + }; + + pinctrl_flexcan1: flexcan1grp{ + fsl,pins = < + MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x1b020 + MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x1b020 + >; + }; + pinctrl_flexcan2: flexcan2grp{ + fsl,pins = < + MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX 0x1b020 + MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX 0x1b020 + >; + }; + + pinctrl_lcdif_dat0_17: lcdifdatgrp0-17 { + fsl,pins = < + MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x79 + MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x79 + MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x79 + MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x79 + MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x79 + MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x79 + MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x79 + MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x79 + MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x79 + MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x79 + MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x79 + MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x79 + MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x79 + MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x79 + MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x79 + MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x79 + MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x79 + MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x79 + >; + }; + + pinctrl_lcdif_clken: lcdifctrlgrp1 { + fsl,pins = < + MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x17050 + MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x79 + >; + }; + + pinctrl_lcdif_hvsync: lcdifctrlgrp2 { + fsl,pins = < + MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x79 + MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x79 + >; + }; + + pinctrl_pwm4: pwm4grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO05__PWM4_OUT 0x110b0 + >; + }; + + pinctrl_pwm5: pwm5grp { + fsl,pins = < + MX6UL_PAD_NAND_DQS__PWM5_OUT 0x110b0 + >; + }; + + pinctrl_sai2: sai2grp { + fsl,pins = < + MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA 0x11088 + MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA 0x11088 + MX6UL_PAD_JTAG_TMS__SAI2_MCLK 0x17088 + MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK 0x17088 + MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC 0x17088 + /* Interrupt */ + MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x10b0 + >; + }; + + pinctrl_sai2_sleep: sai2grp-sleep { + fsl,pins = < + MX6UL_PAD_JTAG_TRST_B__GPIO1_IO15 0x3000 + MX6UL_PAD_JTAG_TCK__GPIO1_IO14 0x3000 + MX6UL_PAD_JTAG_TMS__GPIO1_IO11 0x3000 + MX6UL_PAD_JTAG_TDO__GPIO1_IO12 0x3000 + /* Interrupt */ + MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x3000 + >; + }; + + pinctrl_uart2_4wires: uart2grp-4wires { + fsl,pins = < + MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX 0x1b0b1 + MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX 0x1b0b1 + MX6UL_PAD_UART2_CTS_B__UART2_DCE_CTS 0x1b0b1 + MX6UL_PAD_UART2_RTS_B__UART2_DCE_RTS 0x1b0b1 + >; + }; + + pinctrl_uart3_2wires: uart3grp-2wires { + fsl,pins = < + MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX 0x1b0b1 + MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX6UL_PAD_UART5_TX_DATA__UART5_DCE_TX 0x1b0b1 + MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6UL_PAD_CSI_HSYNC__USDHC2_CMD 0x17059 + MX6UL_PAD_CSI_VSYNC__USDHC2_CLK 0x10039 + MX6UL_PAD_CSI_DATA00__USDHC2_DATA0 0x17059 + MX6UL_PAD_CSI_DATA01__USDHC2_DATA1 0x17059 + MX6UL_PAD_CSI_DATA02__USDHC2_DATA2 0x17059 + MX6UL_PAD_CSI_DATA03__USDHC2_DATA3 0x17059 + /* Mux selector between eMMC/SD# */ + MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x79 + >; + }; + + pinctrl_usbotg1: usbotg1grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID 0x17059 + MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0x17059 + MX6UL_PAD_GPIO1_IO01__USB_OTG1_OC 0x17059 + >; + }; +}; diff --git a/dts/src/arm/imx6ul-geam.dts b/dts/src/arm/imx6ul-geam.dts index d81d20f8fc..e22ec5be2b 100644 --- a/dts/src/arm/imx6ul-geam.dts +++ b/dts/src/arm/imx6ul-geam.dts @@ -1,43 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 /* * Copyright (C) 2016 Amarula Solutions B.V. * Copyright (C) 2016 Engicam S.r.l. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; @@ -328,7 +292,7 @@ >; }; - pinctrl_gpmi_nand: gpmi-nand { + pinctrl_gpmi_nand: gpminandgrp { fsl,pins = < MX6UL_PAD_NAND_CLE__RAWNAND_CLE 0xb0b1 MX6UL_PAD_NAND_ALE__RAWNAND_ALE 0xb0b1 diff --git a/dts/src/arm/imx6ul-isiot-emmc.dts b/dts/src/arm/imx6ul-isiot-emmc.dts index f5b422898e..1df3e376ae 100644 --- a/dts/src/arm/imx6ul-isiot-emmc.dts +++ b/dts/src/arm/imx6ul-isiot-emmc.dts @@ -1,43 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 /* * Copyright (C) 2016 Amarula Solutions B.V. * Copyright (C) 2016 Engicam S.r.l. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; @@ -50,28 +14,5 @@ }; &usdhc2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc2>; - cd-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>; - bus-width = <8>; - no-1-8-v; status = "okay"; }; - -&iomuxc { - pinctrl_usdhc2: usdhc2grp { - fsl,pins = < - MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x17070 - MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x10070 - MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17070 - MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17070 - MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17070 - MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17070 - MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x17070 - MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x17070 - MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x17070 - MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x17070 - MX6UL_PAD_NAND_ALE__USDHC2_RESET_B 0x17070 - >; - }; -}; diff --git a/dts/src/arm/imx6ul-isiot-nand.dts b/dts/src/arm/imx6ul-isiot-nand.dts index de15e1c75d..8c26d4d1a7 100644 --- a/dts/src/arm/imx6ul-isiot-nand.dts +++ b/dts/src/arm/imx6ul-isiot-nand.dts @@ -1,43 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 /* * Copyright (C) 2016 Amarula Solutions B.V. * Copyright (C) 2016 Engicam S.r.l. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; @@ -50,30 +14,5 @@ }; &gpmi { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpmi_nand>; - nand-on-flash-bbt; status = "okay"; }; - -&iomuxc { - pinctrl_gpmi_nand: gpmi-nand { - fsl,pins = < - MX6UL_PAD_NAND_CLE__RAWNAND_CLE 0xb0b1 - MX6UL_PAD_NAND_ALE__RAWNAND_ALE 0xb0b1 - MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B 0xb0b1 - MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B 0xb000 - MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B 0xb0b1 - MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B 0xb0b1 - MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B 0xb0b1 - MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00 0xb0b1 - MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01 0xb0b1 - MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02 0xb0b1 - MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03 0xb0b1 - MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04 0xb0b1 - MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05 0xb0b1 - MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06 0xb0b1 - MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07 0xb0b1 - >; - }; -}; diff --git a/dts/src/arm/imx6ul-isiot.dtsi b/dts/src/arm/imx6ul-isiot.dtsi index cd99285511..b1fa3f0a68 100644 --- a/dts/src/arm/imx6ul-isiot.dtsi +++ b/dts/src/arm/imx6ul-isiot.dtsi @@ -1,43 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 /* * Copyright (C) 2016 Amarula Solutions B.V. * Copyright (C) 2016 Engicam S.r.l. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/gpio/gpio.h> @@ -133,6 +97,13 @@ }; }; +&gpmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpmi_nand>; + nand-on-flash-bbt; + status = "disabled"; +}; + &i2c1 { clock-frequency = <100000>; pinctrl-names = "default"; @@ -243,6 +214,15 @@ status = "okay"; }; +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + cd-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>; + bus-width = <8>; + no-1-8-v; + status = "disabled"; +}; + &iomuxc { pinctrl_enet1: enet1grp { fsl,pins = < @@ -259,6 +239,26 @@ >; }; + pinctrl_gpmi_nand: gpminandgrp { + fsl,pins = < + MX6UL_PAD_NAND_CLE__RAWNAND_CLE 0xb0b1 + MX6UL_PAD_NAND_ALE__RAWNAND_ALE 0xb0b1 + MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B 0xb0b1 + MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B 0xb000 + MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B 0xb0b1 + MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B 0xb0b1 + MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B 0xb0b1 + MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00 0xb0b1 + MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01 0xb0b1 + MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02 0xb0b1 + MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03 0xb0b1 + MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04 0xb0b1 + MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05 0xb0b1 + MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06 0xb0b1 + MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07 0xb0b1 + >; + }; + pinctrl_i2c1: i2c1grp { fsl,pins = < MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0 @@ -366,4 +366,20 @@ MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9 >; }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x17070 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x10070 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17070 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17070 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17070 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17070 + MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x17070 + MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x17070 + MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x17070 + MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x17070 + MX6UL_PAD_NAND_ALE__USDHC2_RESET_B 0x17070 + >; + }; }; diff --git a/dts/src/arm/imx6ul.dtsi b/dts/src/arm/imx6ul.dtsi index 6dc0b569ac..083d3446c4 100644 --- a/dts/src/arm/imx6ul.dtsi +++ b/dts/src/arm/imx6ul.dtsi @@ -89,6 +89,8 @@ "pll1_sys"; arm-supply = <®_arm>; soc-supply = <®_soc>; + nvmem-cells = <&cpu_speed_grade>; + nvmem-cell-names = "speed_grade"; }; }; @@ -156,7 +158,6 @@ compatible = "arm,cortex-a7-pmu"; interrupt-parent = <&gpc>; interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; }; soc { @@ -218,7 +219,7 @@ reg = <0x02000000 0x40000>; ranges; - ecspi1: ecspi@2008000 { + ecspi1: spi@2008000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi"; @@ -230,7 +231,7 @@ status = "disabled"; }; - ecspi2: ecspi@200c000 { + ecspi2: spi@200c000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi"; @@ -242,7 +243,7 @@ status = "disabled"; }; - ecspi3: ecspi@2010000 { + ecspi3: spi@2010000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi"; @@ -254,7 +255,7 @@ status = "disabled"; }; - ecspi4: ecspi@2014000 { + ecspi4: spi@2014000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi"; @@ -918,6 +919,17 @@ reg = <0x021b0000 0x4000>; }; + weim: weim@21b8000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,imx6ul-weim", "fsl,imx6q-weim"; + reg = <0x021b8000 0x4000>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_EIM>; + fsl,weim-cs-gpr = <&gpr>; + status = "disabled"; + }; + ocotp: ocotp-ctrl@21bc000 { #address-cells = <1>; #size-cells = <1>; @@ -932,6 +944,10 @@ tempmon_temp_grade: temp-grade@20 { reg = <0x20 4>; }; + + cpu_speed_grade: speed-grade@10 { + reg = <0x10 4>; + }; }; lcdif: lcdif@21c8000 { @@ -945,7 +961,7 @@ status = "disabled"; }; - qspi: qspi@21e0000 { + qspi: spi@21e0000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6ul-qspi", "fsl,imx6sx-qspi"; diff --git a/dts/src/arm/imx6ull-14x14-evk.dts b/dts/src/arm/imx6ull-14x14-evk.dts index 30ef60344a..0ba64546c1 100644 --- a/dts/src/arm/imx6ull-14x14-evk.dts +++ b/dts/src/arm/imx6ull-14x14-evk.dts @@ -45,7 +45,7 @@ #include "imx6ul-14x14-evk.dtsi" / { - model = "Freescale i.MX6 UlltraLite 14x14 EVK Board"; + model = "Freescale i.MX6 UltraLiteLite 14x14 EVK Board"; compatible = "fsl,imx6ull-14x14-evk", "fsl,imx6ull"; }; diff --git a/dts/src/arm/imx6ull-pinfunc.h b/dts/src/arm/imx6ull-pinfunc.h index fdc46bb09c..a282a31a4b 100644 --- a/dts/src/arm/imx6ull-pinfunc.h +++ b/dts/src/arm/imx6ull-pinfunc.h @@ -14,14 +14,38 @@ * The pin function ID is a tuple of * <mux_reg conf_reg input_reg mux_mode input_val> */ +/* signals common for i.MX6UL and i.MX6ULL */ +#undef MX6UL_PAD_UART5_TX_DATA__UART5_DTE_RX +#define MX6UL_PAD_UART5_TX_DATA__UART5_DTE_RX 0x00BC 0x0348 0x0644 0x0 0x6 +#undef MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX +#define MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX 0x00C0 0x034C 0x0644 0x0 0x7 +#undef MX6UL_PAD_ENET1_RX_EN__UART5_DCE_RTS +#define MX6UL_PAD_ENET1_RX_EN__UART5_DCE_RTS 0x00CC 0x0358 0x0640 0x1 0x5 +#undef MX6UL_PAD_ENET1_TX_DATA0__UART5_DTE_RTS +#define MX6UL_PAD_ENET1_TX_DATA0__UART5_DTE_RTS 0x00D0 0x035C 0x0640 0x1 0x6 +#undef MX6UL_PAD_CSI_DATA02__UART5_DCE_RTS +#define MX6UL_PAD_CSI_DATA02__UART5_DCE_RTS 0x01EC 0x0478 0x0640 0x8 0x7 + +/* signals for i.MX6ULL only */ +#define MX6ULL_PAD_UART1_TX_DATA__UART5_DCE_TX 0x0084 0x0310 0x0000 0x9 0x0 #define MX6ULL_PAD_UART1_TX_DATA__UART5_DTE_RX 0x0084 0x0310 0x0644 0x9 0x4 #define MX6ULL_PAD_UART1_RX_DATA__UART5_DCE_RX 0x0088 0x0314 0x0644 0x9 0x5 -#define MX6ULL_PAD_UART1_CTS_B__UART5_DCE_RTS 0x008C 0x0318 0x0640 0x9 0x3 -#define MX6ULL_PAD_UART1_RTS_B__UART5_DTE_RTS 0x0090 0x031C 0x0640 0x9 0x4 -#define MX6ULL_PAD_UART5_TX_DATA__UART5_DTE_RX 0x00BC 0x0348 0x0644 0x0 0x6 -#define MX6ULL_PAD_UART5_RX_DATA__UART5_DCE_RX 0x00C0 0x034C 0x0644 0x0 0x7 -#define MX6ULL_PAD_ENET1_RX_EN__UART5_DCE_RTS 0x00CC 0x0358 0x0640 0x1 0x5 -#define MX6ULL_PAD_ENET1_TX_DATA0__UART5_DTE_RTS 0x00D0 0x035C 0x0640 0x1 0x6 +#define MX6ULL_PAD_UART1_RX_DATA__UART5_DTE_TX 0x0088 0x0314 0x0000 0x9 0x0 +#define MX6ULL_PAD_UART1_CTS_B__UART5_DCE_CTS 0x008C 0x0318 0x0000 0x9 0x0 +#define MX6ULL_PAD_UART1_CTS_B__UART5_DTE_RTS 0x008C 0x0318 0x0640 0x9 0x3 +#define MX6ULL_PAD_UART1_RTS_B__UART5_DCE_RTS 0x0090 0x031C 0x0640 0x9 0x4 +#define MX6ULL_PAD_UART1_RTS_B__UART5_DTE_CTS 0x0090 0x031C 0x0000 0x9 0x0 +#define MX6ULL_PAD_UART4_RX_DATA__EPDC_PWRCTRL01 0x00B8 0x0344 0x0000 0x9 0x0 +#define MX6ULL_PAD_UART5_TX_DATA__EPDC_PWRCTRL02 0x00BC 0x0348 0x0000 0x9 0x0 +#define MX6ULL_PAD_UART5_RX_DATA__EPDC_PWRCTRL03 0x00C0 0x034C 0x0000 0x9 0x0 +#define MX6ULL_PAD_ENET1_RX_DATA0__EPDC_SDCE04 0x00C4 0x0350 0x0000 0x9 0x0 +#define MX6ULL_PAD_ENET1_RX_DATA1__EPDC_SDCE05 0x00C8 0x0354 0x0000 0x9 0x0 +#define MX6ULL_PAD_ENET1_RX_EN__EPDC_SDCE06 0x00CC 0x0358 0x0000 0x9 0x0 +#define MX6ULL_PAD_ENET1_TX_DATA0__EPDC_SDCE07 0x00D0 0x035C 0x0000 0x9 0x0 +#define MX6ULL_PAD_ENET1_TX_DATA1__EPDC_SDCE08 0x00D4 0x0360 0x0000 0x9 0x0 +#define MX6ULL_PAD_ENET1_TX_EN__EPDC_SDCE09 0x00D8 0x0364 0x0000 0x9 0x0 +#define MX6ULL_PAD_ENET1_TX_CLK__EPDC_SDOED 0x00DC 0x0368 0x0000 0x9 0x0 +#define MX6ULL_PAD_ENET1_RX_ER__EPDC_SDOEZ 0x00E0 0x036C 0x0000 0x9 0x0 #define MX6ULL_PAD_ENET2_RX_DATA0__EPDC_SDDO08 0x00E4 0x0370 0x0000 0x9 0x0 #define MX6ULL_PAD_ENET2_RX_DATA1__EPDC_SDDO09 0x00E8 0x0374 0x0000 0x9 0x0 #define MX6ULL_PAD_ENET2_RX_EN__EPDC_SDDO10 0x00EC 0x0378 0x0000 0x9 0x0 @@ -48,6 +72,8 @@ #define MX6ULL_PAD_LCD_DATA16__EPDC_GDCLK 0x0158 0x03E4 0x0000 0x9 0x0 #define MX6ULL_PAD_LCD_DATA17__EPDC_GDSP 0x015C 0x03E8 0x0000 0x9 0x0 #define MX6ULL_PAD_LCD_DATA21__EPDC_SDCE1 0x016C 0x03F8 0x0000 0x9 0x0 +#define MX6ULL_PAD_LCD_DATA22__EPDC_SDCE02 0x0170 0x03FC 0x0000 0x9 0x0 +#define MX6ULL_PAD_LCD_DATA23__EPDC_SDCE03 0x0174 0x0400 0x0000 0x9 0x0 #define MX6ULL_PAD_CSI_MCLK__ESAI_TX3_RX2 0x01D4 0x0460 0x0000 0x9 0x0 #define MX6ULL_PAD_CSI_PIXCLK__ESAI_TX2_RX3 0x01D8 0x0464 0x0000 0x9 0x0 #define MX6ULL_PAD_CSI_VSYNC__ESAI_TX4_RX1 0x01DC 0x0468 0x0000 0x9 0x0 @@ -55,7 +81,6 @@ #define MX6ULL_PAD_CSI_DATA00__ESAI_TX_HF_CLK 0x01E4 0x0470 0x0000 0x9 0x0 #define MX6ULL_PAD_CSI_DATA01__ESAI_RX_HF_CLK 0x01E8 0x0474 0x0000 0x9 0x0 #define MX6ULL_PAD_CSI_DATA02__ESAI_RX_FS 0x01EC 0x0478 0x0000 0x9 0x0 -#define MX6ULL_PAD_CSI_DATA02__UART5_DCE_RTS 0x01EC 0x0478 0x0640 0x8 0x7 #define MX6ULL_PAD_CSI_DATA03__ESAI_RX_CLK 0x01F0 0x047C 0x0000 0x9 0x0 #define MX6ULL_PAD_CSI_DATA04__ESAI_TX_FS 0x01F4 0x0480 0x0000 0x9 0x0 #define MX6ULL_PAD_CSI_DATA05__ESAI_TX_CLK 0x01F8 0x0484 0x0000 0x9 0x0 diff --git a/dts/src/arm/imx6ull.dtsi b/dts/src/arm/imx6ull.dtsi index cd1776a701..796ed35d4a 100644 --- a/dts/src/arm/imx6ull.dtsi +++ b/dts/src/arm/imx6ull.dtsi @@ -22,7 +22,7 @@ >; fsl,soc-operating-points = < /* KHz uV */ - 900000 1175000 + 900000 1250000 792000 1175000 528000 1175000 396000 1175000 diff --git a/dts/src/arm/imx6ulz-14x14-evk.dts b/dts/src/arm/imx6ulz-14x14-evk.dts new file mode 100644 index 0000000000..6f1af240e0 --- /dev/null +++ b/dts/src/arm/imx6ulz-14x14-evk.dts @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// +// Copyright 2018 NXP. + +/dts-v1/; + +#include "imx6ulz.dtsi" +#include "imx6ul-14x14-evk.dtsi" + +/delete-node/ &fec1; +/delete-node/ &fec2; +/delete-node/ &lcdif; +/delete-node/ &tsc; + +/ { + model = "Freescale i.MX6 ULZ 14x14 EVK Board"; + compatible = "fsl,imx6ulz-14x14-evk", "fsl,imx6ull", "fsl,imx6ulz"; + + /delete-node/ panel; +}; diff --git a/dts/src/arm/imx6ulz.dtsi b/dts/src/arm/imx6ulz.dtsi new file mode 100644 index 0000000000..ae6d7e5937 --- /dev/null +++ b/dts/src/arm/imx6ulz.dtsi @@ -0,0 +1,38 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// +// Copyright 2018 NXP. + +#include "imx6ull.dtsi" + +/ { + aliases { + /delete-property/ ethernet0; + /delete-property/ ethernet1; + /delete-property/ i2c2; + /delete-property/ i2c3; + /delete-property/ serial4; + /delete-property/ serial5; + /delete-property/ serial6; + /delete-property/ serial7; + /delete-property/ spi2; + /delete-property/ spi3; + }; +}; + +/delete-node/ &adc1; +/delete-node/ &can1; +/delete-node/ &can2; +/delete-node/ &ecspi3; +/delete-node/ &ecspi4; +/delete-node/ &epit2; +/delete-node/ &gpt2; +/delete-node/ &i2c3; +/delete-node/ &i2c4; +/delete-node/ &pwm5; +/delete-node/ &pwm6; +/delete-node/ &pwm7; +/delete-node/ &pwm8; +/delete-node/ &uart5; +/delete-node/ &uart6; +/delete-node/ &uart7; +/delete-node/ &uart8; diff --git a/dts/src/arm/imx7d-sdb.dts b/dts/src/arm/imx7d-sdb.dts index c9b3c60b0e..f1bafdaa7e 100644 --- a/dts/src/arm/imx7d-sdb.dts +++ b/dts/src/arm/imx7d-sdb.dts @@ -27,12 +27,14 @@ label = "Volume Up"; gpios = <&gpio5 11 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; + wakeup-source; }; volume-down { label = "Volume Down"; gpios = <&gpio5 10 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEDOWN>; + wakeup-source; }; }; diff --git a/dts/src/arm/imx7d.dtsi b/dts/src/arm/imx7d.dtsi index 7234e8330a..826224bf7f 100644 --- a/dts/src/arm/imx7d.dtsi +++ b/dts/src/arm/imx7d.dtsi @@ -20,6 +20,7 @@ reg = <1>; clock-frequency = <996000000>; operating-points-v2 = <&cpu0_opp_table>; + cpu-idle-states = <&cpu_sleep_wait>; }; }; @@ -63,9 +64,11 @@ clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; clock-names = "apb_pclk"; - port { - etm1_out_port: endpoint { - remote-endpoint = <&ca_funnel_in_port1>; + out-ports { + port { + etm1_out_port: endpoint { + remote-endpoint = <&ca_funnel_in_port1>; + }; }; }; }; @@ -146,17 +149,20 @@ fsl,max-link-speed = <2>; power-domains = <&pgc_pcie_phy>; resets = <&src IMX7_RESET_PCIEPHY>, - <&src IMX7_RESET_PCIE_CTRL_APPS_EN>; - reset-names = "pciephy", "apps"; + <&src IMX7_RESET_PCIE_CTRL_APPS_EN>, + <&src IMX7_RESET_PCIE_CTRL_APPS_TURNOFF>; + reset-names = "pciephy", "apps", "turnoff"; status = "disabled"; }; }; -&ca_funnel_ports { +&ca_funnel_in_ports { + #address-cells = <1>; + #size-cells = <0>; + port@1 { reg = <1>; ca_funnel_in_port1: endpoint { - slave-mode; remote-endpoint = <&etm1_out_port>; }; }; diff --git a/dts/src/arm/imx7s-warp.dts b/dts/src/arm/imx7s-warp.dts index fa390da636..f7ba2c0a24 100644 --- a/dts/src/arm/imx7s-warp.dts +++ b/dts/src/arm/imx7s-warp.dts @@ -1,44 +1,7 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (C) 2016 NXP Semiconductors. * Author: Fabio Estevam <fabio.estevam@nxp.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; @@ -216,6 +179,13 @@ status = "okay"; }; +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; +}; + &i2c4 { clock-frequency = <100000>; pinctrl-names = "default"; @@ -346,6 +316,13 @@ >; }; + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX7D_PAD_I2C3_SDA__I2C3_SDA 0x4000007f + MX7D_PAD_I2C3_SCL__I2C3_SCL 0x4000007f + >; + }; + pinctrl_i2c4: i2c4grp { fsl,pins = < MX7D_PAD_I2C4_SCL__I2C4_SCL 0x4000007f diff --git a/dts/src/arm/imx7s.dtsi b/dts/src/arm/imx7s.dtsi index a052198f6e..aa8df7d93b 100644 --- a/dts/src/arm/imx7s.dtsi +++ b/dts/src/arm/imx7s.dtsi @@ -54,6 +54,19 @@ #address-cells = <1>; #size-cells = <0>; + idle-states { + entry-method = "psci"; + + cpu_sleep_wait: cpu-sleep-wait { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x0010000>; + local-timer-stop; + entry-latency-us = <100>; + exit-latency-us = <50>; + min-residency-us = <1000>; + }; + }; + cpu0: cpu@0 { compatible = "arm,cortex-a7"; device_type = "cpu"; @@ -61,6 +74,7 @@ clock-frequency = <792000000>; clock-latency = <61036>; /* two CLK32 periods */ clocks = <&clks IMX7D_CLK_ARM>; + cpu-idle-states = <&cpu_sleep_wait>; }; }; @@ -106,7 +120,7 @@ */ compatible = "arm,coresight-replicator"; - ports { + out-ports { #address-cells = <1>; #size-cells = <0>; /* replicator output ports */ @@ -123,12 +137,11 @@ remote-endpoint = <&etr_in_port>; }; }; + }; - /* replicator input port */ - port@2 { - reg = <0>; + in-ports { + port { replicator_in_port0: endpoint { - slave-mode; remote-endpoint = <&etf_out_port>; }; }; @@ -168,28 +181,23 @@ clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; clock-names = "apb_pclk"; - ca_funnel_ports: ports { - #address-cells = <1>; - #size-cells = <0>; - - /* funnel input ports */ - port@0 { - reg = <0>; + ca_funnel_in_ports: in-ports { + port { ca_funnel_in_port0: endpoint { - slave-mode; remote-endpoint = <&etm0_out_port>; }; }; - /* funnel output port */ - port@2 { - reg = <0>; + /* the other input ports are not connect to anything */ + }; + + out-ports { + port { ca_funnel_out_port0: endpoint { remote-endpoint = <&hugo_funnel_in_port0>; }; }; - /* the other input ports are not connect to anything */ }; }; @@ -200,9 +208,11 @@ clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; clock-names = "apb_pclk"; - port { - etm0_out_port: endpoint { - remote-endpoint = <&ca_funnel_in_port0>; + out-ports { + port { + etm0_out_port: endpoint { + remote-endpoint = <&ca_funnel_in_port0>; + }; }; }; }; @@ -213,15 +223,13 @@ clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; clock-names = "apb_pclk"; - ports { + in-ports { #address-cells = <1>; #size-cells = <0>; - /* funnel input ports */ port@0 { reg = <0>; hugo_funnel_in_port0: endpoint { - slave-mode; remote-endpoint = <&ca_funnel_out_port0>; }; }; @@ -229,18 +237,18 @@ port@1 { reg = <1>; hugo_funnel_in_port1: endpoint { - slave-mode; /* M4 input */ + /* M4 input */ }; }; + /* the other input ports are not connect to anything */ + }; - port@2 { - reg = <0>; + out-ports { + port { hugo_funnel_out_port0: endpoint { remote-endpoint = <&etf_in_port>; }; }; - - /* the other input ports are not connect to anything */ }; }; @@ -250,20 +258,16 @@ clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; clock-names = "apb_pclk"; - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; + in-ports { + port { etf_in_port: endpoint { - slave-mode; remote-endpoint = <&hugo_funnel_out_port0>; }; }; + }; - port@1 { - reg = <0>; + out-ports { + port { etf_out_port: endpoint { remote-endpoint = <&replicator_in_port0>; }; @@ -277,10 +281,11 @@ clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; clock-names = "apb_pclk"; - port { - etr_in_port: endpoint { - slave-mode; - remote-endpoint = <&replicator_out_port1>; + in-ports { + port { + etr_in_port: endpoint { + remote-endpoint = <&replicator_out_port1>; + }; }; }; }; @@ -291,10 +296,11 @@ clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; clock-names = "apb_pclk"; - port { - tpiu_in_port: endpoint { - slave-mode; - remote-endpoint = <&replicator_out_port0>; + in-ports { + port { + tpiu_in_port: endpoint { + remote-endpoint = <&replicator_out_port0>; + }; }; }; }; @@ -563,14 +569,6 @@ clock-names = "snvs-rtc"; }; - snvs_poweroff: snvs-poweroff { - compatible = "syscon-poweroff"; - regmap = <&snvs>; - offset = <0x38>; - value = <0x60>; - mask = <0x60>; - }; - snvs_pwrkey: snvs-powerkey { compatible = "fsl,sec-v4.0-pwrkey"; regmap = <&snvs>; @@ -644,7 +642,7 @@ status = "disabled"; }; - ecspi4: ecspi@30630000 { + ecspi4: spi@30630000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi"; @@ -725,7 +723,7 @@ reg = <0x30800000 0x100000>; ranges; - ecspi1: ecspi@30820000 { + ecspi1: spi@30820000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi"; @@ -737,7 +735,7 @@ status = "disabled"; }; - ecspi2: ecspi@30830000 { + ecspi2: spi@30830000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi"; @@ -749,7 +747,7 @@ status = "disabled"; }; - ecspi3: ecspi@30840000 { + ecspi3: spi@30840000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi"; @@ -974,6 +972,25 @@ status = "disabled"; }; + mu0a: mailbox@30aa0000 { + compatible = "fsl,imx7s-mu", "fsl,imx6sx-mu"; + reg = <0x30aa0000 0x10000>; + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_MU_ROOT_CLK>; + #mbox-cells = <2>; + status = "disabled"; + }; + + mu0b: mailbox@30ab0000 { + compatible = "fsl,imx7s-mu", "fsl,imx6sx-mu"; + reg = <0x30ab0000 0x10000>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_MU_ROOT_CLK>; + #mbox-cells = <2>; + fsl,mu-side-b; + status = "disabled"; + }; + usbotg1: usb@30b10000 { compatible = "fsl,imx7d-usb", "fsl,imx27-usb"; reg = <0x30b10000 0x200>; diff --git a/dts/src/arm/imx7ulp-pinfunc.h b/dts/src/arm/imx7ulp-pinfunc.h index fe511775b5..85f6b01780 100644 --- a/dts/src/arm/imx7ulp-pinfunc.h +++ b/dts/src/arm/imx7ulp-pinfunc.h @@ -116,6 +116,7 @@ #define IMX7ULP_PAD_PTC13__LPI2C7_SDA 0x0034 0x030c 0x5 0x1 #define IMX7ULP_PAD_PTC13__TPM7_CLKIN 0x0034 0x02f4 0x6 0x1 #define IMX7ULP_PAD_PTC13__FB_AD13 0x0034 0x0000 0x9 0x0 +#define IMX7ULP_PAD_PTC13__USB0_ID 0x0034 0x0338 0xb 0x1 #define IMX7ULP_PAD_PTC14__PTC14 0x0038 0x0000 0x1 0x0 #define IMX7ULP_PAD_PTC14__TRACE_D1 0x0038 0x0000 0xa 0x0 #define IMX7ULP_PAD_PTC14__FXIO1_D10 0x0038 0x022c 0x2 0x1 @@ -136,6 +137,7 @@ #define IMX7ULP_PAD_PTC16__LPSPI3_SIN 0x0040 0x0324 0x3 0x1 #define IMX7ULP_PAD_PTC16__TPM7_CH2 0x0040 0x02e4 0x6 0x1 #define IMX7ULP_PAD_PTC16__FB_ALE_FB_CS1_B_FB_TS_B 0x0040 0x0000 0x9 0x0 +#define IMX7ULP_PAD_PTC16__USB1_OC2 0x0040 0x0334 0xb 0x1 #define IMX7ULP_PAD_PTC17__PTC17 0x0044 0x0000 0x1 0x0 #define IMX7ULP_PAD_PTC17__FXIO1_D13 0x0044 0x0238 0x2 0x1 #define IMX7ULP_PAD_PTC17__LPSPI3_SOUT 0x0044 0x0328 0x3 0x1 @@ -146,11 +148,16 @@ #define IMX7ULP_PAD_PTC18__LPSPI3_SCK 0x0048 0x0320 0x3 0x1 #define IMX7ULP_PAD_PTC18__TPM6_CH0 0x0048 0x02d0 0x6 0x1 #define IMX7ULP_PAD_PTC18__FB_OE_B 0x0048 0x0000 0x9 0x0 +#define IMX7ULP_PAD_PTC18__USB0_ID 0x0048 0x0338 0xb 0x2 +#define IMX7ULP_PAD_PTC18__VIU_DE 0x0048 0x033c 0xc 0x1 #define IMX7ULP_PAD_PTC19__PTC19 0x004c 0x0000 0x1 0x0 #define IMX7ULP_PAD_PTC19__FXIO1_D15 0x004c 0x0240 0x2 0x1 #define IMX7ULP_PAD_PTC19__LPSPI3_PCS0 0x004c 0x0310 0x3 0x1 #define IMX7ULP_PAD_PTC19__TPM6_CH1 0x004c 0x02d4 0x6 0x1 #define IMX7ULP_PAD_PTC19__FB_A16 0x004c 0x0000 0x9 0x0 +#define IMX7ULP_PAD_PTC19__USB0_ID 0x004c 0x0338 0xa 0x3 +#define IMX7ULP_PAD_PTC19__USB1_PWR2 0x004c 0x0000 0xb 0x0 +#define IMX7ULP_PAD_PTC19__VIU_DE 0x004c 0x033c 0xc 0x3 #define IMX7ULP_PAD_PTD0__PTD0 0x0080 0x0000 0x1 0x0 #define IMX7ULP_PAD_PTD0__SDHC0_RESET_B 0x0080 0x0000 0x8 0x0 #define IMX7ULP_PAD_PTD1__PTD1 0x0084 0x0000 0x1 0x0 @@ -218,6 +225,7 @@ #define IMX7ULP_PAD_PTE5__LPI2C5_SDA 0x0114 0x02c0 0x5 0x2 #define IMX7ULP_PAD_PTE5__TPM5_CH0 0x0114 0x02c4 0x6 0x2 #define IMX7ULP_PAD_PTE5__SDHC1_D2 0x0114 0x0000 0x8 0x0 +#define IMX7ULP_PAD_PTE5__VIU_DE 0x0114 0x033c 0xc 0x2 #define IMX7ULP_PAD_PTE6__PTE6 0x0118 0x0000 0x1 0x0 #define IMX7ULP_PAD_PTE6__FXIO1_D25 0x0118 0x0000 0x2 0x0 #define IMX7ULP_PAD_PTE6__LPSPI2_SCK 0x0118 0x02ac 0x3 0x2 @@ -226,8 +234,10 @@ #define IMX7ULP_PAD_PTE6__TPM7_CH3 0x0118 0x02e8 0x6 0x2 #define IMX7ULP_PAD_PTE6__SDHC1_D4 0x0118 0x0000 0x8 0x0 #define IMX7ULP_PAD_PTE6__FB_A17 0x0118 0x0000 0x9 0x0 +#define IMX7ULP_PAD_PTE6__USB0_OC 0x0118 0x0330 0xb 0x1 #define IMX7ULP_PAD_PTE7__PTE7 0x011c 0x0000 0x1 0x0 #define IMX7ULP_PAD_PTE7__TRACE_D7 0x011c 0x0000 0xa 0x0 +#define IMX7ULP_PAD_PTE7__USB0_PWR 0x011c 0x0000 0xb 0x0 #define IMX7ULP_PAD_PTE7__VIU_FID 0x011c 0x0000 0xc 0x0 #define IMX7ULP_PAD_PTE7__FXIO1_D24 0x011c 0x0000 0x2 0x0 #define IMX7ULP_PAD_PTE7__LPSPI2_PCS0 0x011c 0x029c 0x3 0x2 @@ -278,6 +288,7 @@ #define IMX7ULP_PAD_PTE11__FB_A20 0x012c 0x0000 0x9 0x0 #define IMX7ULP_PAD_PTE12__PTE12 0x0130 0x0000 0x1 0x0 #define IMX7ULP_PAD_PTE12__TRACE_D2 0x0130 0x0000 0xa 0x0 +#define IMX7ULP_PAD_PTE12__USB1_OC2 0x0130 0x0334 0xb 0x2 #define IMX7ULP_PAD_PTE12__VIU_D20 0x0130 0x0000 0xc 0x0 #define IMX7ULP_PAD_PTE12__FXIO1_D19 0x0130 0x0000 0x2 0x0 #define IMX7ULP_PAD_PTE12__LPSPI3_SIN 0x0130 0x0324 0x3 0x2 @@ -288,6 +299,7 @@ #define IMX7ULP_PAD_PTE12__FB_A21 0x0130 0x0000 0x9 0x0 #define IMX7ULP_PAD_PTE13__PTE13 0x0134 0x0000 0x1 0x0 #define IMX7ULP_PAD_PTE13__TRACE_D1 0x0134 0x0000 0xa 0x0 +#define IMX7ULP_PAD_PTE13__USB1_PWR2 0x0134 0x0000 0xb 0x0 #define IMX7ULP_PAD_PTE13__VIU_D21 0x0134 0x0000 0xc 0x0 #define IMX7ULP_PAD_PTE13__FXIO1_D18 0x0134 0x0000 0x2 0x0 #define IMX7ULP_PAD_PTE13__LPSPI3_SOUT 0x0134 0x0328 0x3 0x2 @@ -298,6 +310,7 @@ #define IMX7ULP_PAD_PTE13__FB_A22 0x0134 0x0000 0x9 0x0 #define IMX7ULP_PAD_PTE14__PTE14 0x0138 0x0000 0x1 0x0 #define IMX7ULP_PAD_PTE14__TRACE_D0 0x0138 0x0000 0xa 0x0 +#define IMX7ULP_PAD_PTE14__USB0_OC 0x0138 0x0330 0xb 0x2 #define IMX7ULP_PAD_PTE14__VIU_D22 0x0138 0x0000 0xc 0x0 #define IMX7ULP_PAD_PTE14__FXIO1_D17 0x0138 0x0000 0x2 0x0 #define IMX7ULP_PAD_PTE14__LPSPI3_SCK 0x0138 0x0320 0x3 0x2 @@ -308,6 +321,7 @@ #define IMX7ULP_PAD_PTE14__FB_A23 0x0138 0x0000 0x9 0x0 #define IMX7ULP_PAD_PTE15__PTE15 0x013c 0x0000 0x1 0x0 #define IMX7ULP_PAD_PTE15__TRACE_CLKOUT 0x013c 0x0000 0xa 0x0 +#define IMX7ULP_PAD_PTE15__USB0_PWR 0x013c 0x0000 0xb 0x0 #define IMX7ULP_PAD_PTE15__VIU_D23 0x013c 0x0000 0xc 0x0 #define IMX7ULP_PAD_PTE15__FXIO1_D16 0x013c 0x0000 0x2 0x0 #define IMX7ULP_PAD_PTE15__LPSPI3_PCS0 0x013c 0x0310 0x3 0x2 @@ -315,7 +329,7 @@ #define IMX7ULP_PAD_PTE15__TPM6_CH1 0x013c 0x02d4 0x6 0x2 #define IMX7ULP_PAD_PTE15__FB_A24 0x013c 0x0000 0x9 0x0 #define IMX7ULP_PAD_PTF0__PTF0 0x0180 0x0000 0x1 0x0 -#define IMX7ULP_PAD_PTF0__VIU_DE 0x0180 0x0000 0xc 0x0 +#define IMX7ULP_PAD_PTF0__VIU_DE 0x0180 0x033c 0xc 0x0 #define IMX7ULP_PAD_PTF0__LPUART4_CTS_B 0x0180 0x0244 0x4 0x3 #define IMX7ULP_PAD_PTF0__LPI2C4_SCL 0x0180 0x0278 0x5 0x3 #define IMX7ULP_PAD_PTF0__TPM4_CLKIN 0x0180 0x0298 0x6 0x3 diff --git a/dts/src/arm/iwg20d-q7-common.dtsi b/dts/src/arm/iwg20d-q7-common.dtsi index 5cae74eb6c..ca9154dd80 100644 --- a/dts/src/arm/iwg20d-q7-common.dtsi +++ b/dts/src/arm/iwg20d-q7-common.dtsi @@ -160,10 +160,6 @@ clock-frequency = <100000000>; }; -&pciec { - status = "okay"; -}; - &pfc { can0_pins: can0 { groups = "can0_data_d"; diff --git a/dts/src/arm/keystone-k2g.dtsi b/dts/src/arm/keystone-k2g.dtsi index 738b44cf2b..1c833105d6 100644 --- a/dts/src/arm/keystone-k2g.dtsi +++ b/dts/src/arm/keystone-k2g.dtsi @@ -416,7 +416,7 @@ clock-names = "fck", "mmchsdb_fck"; }; - qspi: qspi@2940000 { + qspi: spi@2940000 { compatible = "ti,k2g-qspi", "cdns,qspi-nor"; #address-cells = <1>; #size-cells = <0>; diff --git a/dts/src/arm/lpc32xx.dtsi b/dts/src/arm/lpc32xx.dtsi index abff7ef7c9..b7303a4e42 100644 --- a/dts/src/arm/lpc32xx.dtsi +++ b/dts/src/arm/lpc32xx.dtsi @@ -179,7 +179,7 @@ * ssp0 and spi1 are shared pins; * enable one in your board dts, as needed. */ - ssp0: ssp@20084000 { + ssp0: spi@20084000 { compatible = "arm,pl022", "arm,primecell"; reg = <0x20084000 0x1000>; interrupts = <20 IRQ_TYPE_LEVEL_HIGH>; @@ -199,7 +199,7 @@ * ssp1 and spi2 are shared pins; * enable one in your board dts, as needed. */ - ssp1: ssp@2008c000 { + ssp1: spi@2008c000 { compatible = "arm,pl022", "arm,primecell"; reg = <0x2008c000 0x1000>; interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; diff --git a/dts/src/arm/ls1021a-qds.dts b/dts/src/arm/ls1021a-qds.dts index 499f41a2c6..923a257605 100644 --- a/dts/src/arm/ls1021a-qds.dts +++ b/dts/src/arm/ls1021a-qds.dts @@ -1,5 +1,6 @@ /* * Copyright 2013-2014 Freescale Semiconductor, Inc. + * Copyright 2018 NXP * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -235,6 +236,7 @@ #size-cells = <1>; compatible = "cfi-flash"; reg = <0x0 0x0 0x8000000>; + big-endian; bank-width = <2>; device-width = <1>; }; diff --git a/dts/src/arm/ls1021a-twr.dts b/dts/src/arm/ls1021a-twr.dts index f0c949d748..8b48c3c7cd 100644 --- a/dts/src/arm/ls1021a-twr.dts +++ b/dts/src/arm/ls1021a-twr.dts @@ -1,5 +1,6 @@ /* * Copyright 2013-2014 Freescale Semiconductor, Inc. + * Copyright 2018 NXP * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -203,6 +204,7 @@ #size-cells = <1>; compatible = "cfi-flash"; reg = <0x0 0x0 0x8000000>; + big-endian; bank-width = <2>; device-width = <1>; }; diff --git a/dts/src/arm/ls1021a.dtsi b/dts/src/arm/ls1021a.dtsi index f18490548c..bdd6e66a79 100644 --- a/dts/src/arm/ls1021a.dtsi +++ b/dts/src/arm/ls1021a.dtsi @@ -163,7 +163,7 @@ big-endian; }; - qspi: quadspi@1550000 { + qspi: spi@1550000 { compatible = "fsl,ls1021a-qspi"; #address-cells = <1>; #size-cells = <0>; @@ -330,7 +330,7 @@ }; }; - dspi0: dspi@2100000 { + dspi0: spi@2100000 { compatible = "fsl,ls1021a-v1.0-dspi"; #address-cells = <1>; #size-cells = <0>; @@ -343,7 +343,7 @@ status = "disabled"; }; - dspi1: dspi@2110000 { + dspi1: spi@2110000 { compatible = "fsl,ls1021a-v1.0-dspi"; #address-cells = <1>; #size-cells = <0>; @@ -364,6 +364,8 @@ interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; clock-names = "i2c"; clocks = <&clockgen 4 1>; + dma-names = "tx", "rx"; + dmas = <&edma0 1 39>, <&edma0 1 38>; status = "disabled"; }; @@ -375,6 +377,8 @@ interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; clock-names = "i2c"; clocks = <&clockgen 4 1>; + dma-names = "tx", "rx"; + dmas = <&edma0 1 37>, <&edma0 1 36>; status = "disabled"; }; @@ -386,6 +390,8 @@ interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; clock-names = "i2c"; clocks = <&clockgen 4 1>; + dma-names = "tx", "rx"; + dmas = <&edma0 1 35>, <&edma0 1 34>; status = "disabled"; }; diff --git a/dts/src/arm/meson8.dtsi b/dts/src/arm/meson8.dtsi index d77dcf890c..7162e0ca05 100644 --- a/dts/src/arm/meson8.dtsi +++ b/dts/src/arm/meson8.dtsi @@ -194,7 +194,7 @@ #clock-cells = <1>; #reset-cells = <1>; compatible = "amlogic,meson8-clkc"; - reg = <0x8000 0x4>, <0x4000 0x460>; + reg = <0x8000 0x4>, <0x4000 0x400>; }; reset: reset-controller@4404 { diff --git a/dts/src/arm/meson8b-ec100.dts b/dts/src/arm/meson8b-ec100.dts new file mode 100644 index 0000000000..0872f6e3ab --- /dev/null +++ b/dts/src/arm/meson8b-ec100.dts @@ -0,0 +1,248 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2018 Martin Blumenstingl <martin.blumenstingl@googlemail.com>. + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +#include "meson8b.dtsi" + +/ { + model = "Endless Computers Endless Mini"; + compatible = "endless,ec100", "amlogic,meson8b"; + + aliases { + serial0 = &uart_AO; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory { + reg = <0x40000000 0x40000000>; + }; + + gpio-keys { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; + + pal-switch { + label = "pal"; + linux,input-type = <EV_SW>; + linux,code = <KEY_SWITCHVIDEOMODE>; + gpios = <&gpio GPIOH_7 GPIO_ACTIVE_LOW>; + }; + + ntsc-switch { + label = "ntsc"; + linux,input-type = <EV_SW>; + linux,code = <KEY_SWITCHVIDEOMODE>; + gpios = <&gpio GPIOH_8 GPIO_ACTIVE_HIGH>; + }; + + power-button { + label = "power"; + linux,code = <KEY_POWER>; + gpios = <&gpio GPIOH_9 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-poweroff { + compatible = "gpio-poweroff"; + /* + * shutdown is managed by the EC (embedded micro-controller) + * which is configured through GPIOAO_2 (poweroff GPIO) and + * GPIOAO_7 (power LED, which has to go LOW as well). + */ + gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>; + timeout-ms = <20000>; + }; + + leds { + compatible = "gpio-leds"; + + power { + label = "ec100:red:power"; + /* + * Needs to go LOW (together with the poweroff GPIO) + * during shutdown to allow the EC (embedded + * micro-controller) to shutdown the system. Setting + * the output to LOW signals the EC to start a + * "breathing"/pulsing effect until the power is fully + * turned off. + */ + gpios = <&gpio_ao GPIOAO_7 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; + + usb_vbus: regulator-usb-vbus { + compatible = "regulator-fixed"; + + regulator-name = "USB_VBUS"; + + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + gpio = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vcc_5v: regulator-vcc5v { + compatible = "regulator-fixed"; + + regulator-name = "VCC5V"; + + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + gpio = <&gpio GPIODV_29 GPIO_ACTIVE_LOW>; + + regulator-boot-on; + regulator-always-on; + }; + + vcck: regulator-vcck { + compatible = "pwm-regulator"; + + regulator-name = "VCCK"; + regulator-min-microvolt = <860000>; + regulator-max-microvolt = <1140000>; + + pwms = <&pwm_cd 0 1148 0>; + pwm-dutycycle-range = <100 0>; + + regulator-boot-on; + regulator-always-on; + }; + + vcc_1v8: regulator-vcc1v8 { + compatible = "regulator-fixed"; + + regulator-name = "VCC1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vcc_3v3: regulator-vcc3v3 { + compatible = "regulator-fixed"; + + regulator-name = "VCC3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&cpu0 { + cpu-supply = <&vcck>; +}; + +ðmac { + status = "okay"; + + pinctrl-0 = <ð_rmii_pins>; + pinctrl-names = "default"; + + phy-handle = <ð_phy0>; + phy-mode = "rmii"; + + snps,reset-gpio = <&gpio GPIOH_4 0>; + snps,reset-delays-us = <0 10000 1000000>; + snps,reset-active-low; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + eth_phy0: ethernet-phy@0 { + /* IC Plus IP101A/G (0x02430c54) */ + reg = <0>; + }; + }; +}; + +&i2c_A { + status = "okay"; + pinctrl-0 = <&i2c_a_pins>; + pinctrl-names = "default"; + + rt5640: codec@1c { + compatible = "realtek,rt5640"; + reg = <0x1c>; + interrupt-parent = <&gpio_intc>; + interrupts = <13 IRQ_TYPE_EDGE_BOTH>; /* GPIOAO_13 */ + realtek,in1-differential; + }; +}; + +&saradc { + status = "okay"; + vref-supply = <&vcc_1v8>; +}; + +&sdio { + status = "okay"; + + pinctrl-0 = <&sd_b_pins>; + pinctrl-names = "default"; + + /* SD card */ + sd_card_slot: slot@1 { + compatible = "mmc-slot"; + reg = <1>; + status = "okay"; + + bus-width = <4>; + no-sdio; + cap-mmc-highspeed; + cap-sd-highspeed; + disable-wp; + + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>; + cd-inverted; + + vmmc-supply = <&vcc_3v3>; + }; +}; + +&pwm_cd { + status = "okay"; + pinctrl-0 = <&pwm_c1_pins>; + pinctrl-names = "default"; + clocks = <&clkc CLKID_XTAL>; + clock-names = "clkin0"; +}; + +/* exposed through the pin headers labeled "URDUG1" on the top of the PCB */ +&uart_AO { + status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; +}; + +/* + * connected to the Bluetooth part of the RTL8723BS SDIO wifi / Bluetooth + * combo chip. This is only available on the variant with 2GB RAM. + */ +&uart_B { + status = "okay"; + pinctrl-0 = <&uart_b0_pins>, <&uart_b0_cts_rts_pins>; + pinctrl-names = "default"; + uart-has-rtscts; +}; + +&usb1 { + status = "okay"; + vbus-supply = <&usb_vbus>; +}; + +&usb1_phy { + status = "okay"; +}; diff --git a/dts/src/arm/meson8b-odroidc1.dts b/dts/src/arm/meson8b-odroidc1.dts index ef3177d3da..58669abda2 100644 --- a/dts/src/arm/meson8b-odroidc1.dts +++ b/dts/src/arm/meson8b-odroidc1.dts @@ -57,6 +57,10 @@ mmc0 = &sd_card_slot; }; + chosen { + stdout-path = "serial0:115200n8"; + }; + memory { reg = <0x40000000 0x40000000>; }; @@ -71,6 +75,14 @@ }; }; + p5v0: regulator-p5v0 { + compatible = "regulator-fixed"; + + regulator-name = "P5V0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + tflash_vdd: regulator-tflash_vdd { /* * signal name from schematics: TFLASH_VDD_EN @@ -81,6 +93,8 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_3v3>; + gpio = <&gpio GPIOY_12 GPIO_ACTIVE_HIGH>; enable-active-high; }; @@ -92,6 +106,8 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_3v3>; + /* * signal name from schematics: TF_3V3N_1V8_EN */ @@ -101,6 +117,86 @@ states = <3300000 0 1800000 1>; }; + + vcc_1v8: regulator-vcc-1v8 { + /* + * RICHTEK RT9179 configured for a fixed output voltage of + * 1.8V. This supplies not only VCC1V8 but also IOREF_1V8 and + * VDD1V8 according to the schematics. + */ + compatible = "regulator-fixed"; + + regulator-name = "VCC1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + vin-supply = <&p5v0>; + }; + + vcc_3v3: regulator-vcc-3v3 { + /* + * Monolithic Power Systems MP2161 configured for a fixed + * output voltage of 3.3V. This supplies not only VCC3V3 but + * also VDD3V3 and VDDIO_AO3V3 according to the schematics. + */ + compatible = "regulator-fixed"; + + regulator-name = "VCC3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + vin-supply = <&p5v0>; + }; + + vcck: regulator-vcck { + /* Monolithic Power Systems MP2161 */ + compatible = "pwm-regulator"; + + regulator-name = "VCCK"; + regulator-min-microvolt = <860000>; + regulator-max-microvolt = <1140000>; + + vin-supply = <&p5v0>; + + pwms = <&pwm_cd 0 12218 0>; + pwm-dutycycle-range = <91 0>; + + regulator-boot-on; + regulator-always-on; + }; + + vddc_ddr: regulator-vddc-ddr { + /* + * Monolithic Power Systems MP2161 configured for a fixed + * output voltage of 1.5V. This supplies not only DDR_VDDC but + * also DDR3_1V5 according to the schematics. + */ + compatible = "regulator-fixed"; + + regulator-name = "DDR_VDDC"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + + vin-supply = <&p5v0>; + }; + + vdd_rtc: regulator-vdd-rtc { + /* + * Torex Semiconductor XC6215 configured for a fixed output of + * 0.9V. + */ + compatible = "regulator-fixed"; + + regulator-name = "VDD_RTC"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + vin-supply = <&vcc_3v3>; + }; +}; + +&cpu0 { + cpu-supply = <&vcck>; }; ðmac { @@ -154,6 +250,11 @@ pinctrl-names = "default"; }; +&saradc { + status = "okay"; + vref-supply = <&vcc_1v8>; +}; + &sdio { status = "okay"; @@ -180,6 +281,14 @@ }; }; +&pwm_cd { + status = "okay"; + pinctrl-0 = <&pwm_c1_pins>; + pinctrl-names = "default"; + clocks = <&clkc CLKID_XTAL>; + clock-names = "clkin0"; +}; + &uart_AO { status = "okay"; pinctrl-0 = <&uart_ao_a_pins>; diff --git a/dts/src/arm/meson8b.dtsi b/dts/src/arm/meson8b.dtsi index 08f7f6be72..cd1ca9dda1 100644 --- a/dts/src/arm/meson8b.dtsi +++ b/dts/src/arm/meson8b.dtsi @@ -163,7 +163,7 @@ #clock-cells = <1>; #reset-cells = <1>; compatible = "amlogic,meson8b-clkc"; - reg = <0x8000 0x4>, <0x4000 0x460>; + reg = <0x8000 0x4>, <0x4000 0x400>; }; reset: reset-controller@4404 { @@ -223,6 +223,28 @@ }; }; + eth_rmii_pins: eth-rmii { + mux { + groups = "eth_tx_en", + "eth_txd1_0", + "eth_txd0_0", + "eth_rx_clk", + "eth_rx_dv", + "eth_rxd1", + "eth_rxd0", + "eth_mdio_en", + "eth_mdc"; + function = "ethernet"; + }; + }; + + i2c_a_pins: i2c-a { + mux { + groups = "i2c_sda_a", "i2c_sck_a"; + function = "i2c_a"; + }; + }; + sd_b_pins: sd-b { mux { groups = "sd_d0_b", "sd_d1_b", "sd_d2_b", @@ -230,6 +252,29 @@ function = "sd_b"; }; }; + + pwm_c1_pins: pwm-c1 { + mux { + groups = "pwm_c1"; + function = "pwm_c"; + }; + }; + + uart_b0_pins: uart-b0 { + mux { + groups = "uart_tx_b0", + "uart_rx_b0"; + function = "uart_b"; + }; + }; + + uart_b0_cts_rts_pins: uart-b0-cts-rts { + mux { + groups = "uart_cts_b0", + "uart_rts_b0"; + function = "uart_b"; + }; + }; }; }; diff --git a/dts/src/arm/mt7623.dtsi b/dts/src/arm/mt7623.dtsi index 1cdc346a05..d01bdee6f2 100644 --- a/dts/src/arm/mt7623.dtsi +++ b/dts/src/arm/mt7623.dtsi @@ -13,6 +13,7 @@ #include <dt-bindings/power/mt2701-power.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/phy/phy.h> +#include <dt-bindings/memory/mt2701-larb-port.h> #include <dt-bindings/reset/mt2701-resets.h> #include <dt-bindings/thermal/thermal.h> @@ -121,6 +122,15 @@ }; }; + pmu { + compatible = "arm,cortex-a7-pmu"; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_LOW>; + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; + }; + system_clk: dummy13m { compatible = "fixed-clock"; clock-frequency = <13000000>; @@ -277,6 +287,17 @@ clock-names = "system-clk", "rtc-clk"; }; + smi_common: smi@1000c000 { + compatible = "mediatek,mt7623-smi-common", + "mediatek,mt2701-smi-common"; + reg = <0 0x1000c000 0 0x1000>; + clocks = <&infracfg CLK_INFRA_SMI>, + <&mmsys CLK_MM_SMI_COMMON>, + <&infracfg CLK_INFRA_SMI>; + clock-names = "apb", "smi", "async"; + power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>; + }; + pwrap: pwrap@1000d000 { compatible = "mediatek,mt7623-pwrap", "mediatek,mt2701-pwrap"; @@ -308,6 +329,17 @@ reg = <0 0x10200100 0 0x1c>; }; + iommu: mmsys_iommu@10205000 { + compatible = "mediatek,mt7623-m4u", + "mediatek,mt2701-m4u"; + reg = <0 0x10205000 0 0x1000>; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_LOW>; + clocks = <&infracfg CLK_INFRA_M4U>; + clock-names = "bclk"; + mediatek,larbs = <&larb0 &larb1 &larb2>; + #iommu-cells = <1>; + }; + efuse: efuse@10206000 { compatible = "mediatek,mt7623-efuse", "mediatek,mt8173-efuse"; @@ -683,6 +715,90 @@ status = "disabled"; }; + g3dsys: syscon@13000000 { + compatible = "mediatek,mt7623-g3dsys", + "mediatek,mt2701-g3dsys", + "syscon"; + reg = <0 0x13000000 0 0x200>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + mmsys: syscon@14000000 { + compatible = "mediatek,mt7623-mmsys", + "mediatek,mt2701-mmsys", + "syscon"; + reg = <0 0x14000000 0 0x1000>; + #clock-cells = <1>; + }; + + larb0: larb@14010000 { + compatible = "mediatek,mt7623-smi-larb", + "mediatek,mt2701-smi-larb"; + reg = <0 0x14010000 0 0x1000>; + mediatek,smi = <&smi_common>; + mediatek,larb-id = <0>; + clocks = <&mmsys CLK_MM_SMI_LARB0>, + <&mmsys CLK_MM_SMI_LARB0>; + clock-names = "apb", "smi"; + power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>; + }; + + imgsys: syscon@15000000 { + compatible = "mediatek,mt7623-imgsys", + "mediatek,mt2701-imgsys", + "syscon"; + reg = <0 0x15000000 0 0x1000>; + #clock-cells = <1>; + }; + + larb2: larb@15001000 { + compatible = "mediatek,mt7623-smi-larb", + "mediatek,mt2701-smi-larb"; + reg = <0 0x15001000 0 0x1000>; + mediatek,smi = <&smi_common>; + mediatek,larb-id = <2>; + clocks = <&imgsys CLK_IMG_SMI_COMM>, + <&imgsys CLK_IMG_SMI_COMM>; + clock-names = "apb", "smi"; + power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>; + }; + + jpegdec: jpegdec@15004000 { + compatible = "mediatek,mt7623-jpgdec", + "mediatek,mt2701-jpgdec"; + reg = <0 0x15004000 0 0x1000>; + interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_LOW>; + clocks = <&imgsys CLK_IMG_JPGDEC_SMI>, + <&imgsys CLK_IMG_JPGDEC>; + clock-names = "jpgdec-smi", + "jpgdec"; + power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>; + mediatek,larb = <&larb2>; + iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>, + <&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>; + }; + + vdecsys: syscon@16000000 { + compatible = "mediatek,mt7623-vdecsys", + "mediatek,mt2701-vdecsys", + "syscon"; + reg = <0 0x16000000 0 0x1000>; + #clock-cells = <1>; + }; + + larb1: larb@16010000 { + compatible = "mediatek,mt7623-smi-larb", + "mediatek,mt2701-smi-larb"; + reg = <0 0x16010000 0 0x1000>; + mediatek,smi = <&smi_common>; + mediatek,larb-id = <1>; + clocks = <&vdecsys CLK_VDEC_CKGEN>, + <&vdecsys CLK_VDEC_LARB>; + clock-names = "apb", "smi"; + power-domains = <&scpsys MT2701_POWER_DOMAIN_VDEC>; + }; + hifsys: syscon@1a000000 { compatible = "mediatek,mt7623-hifsys", "mediatek,mt2701-hifsys", @@ -937,6 +1053,14 @@ power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>; status = "disabled"; }; + + bdpsys: syscon@1c000000 { + compatible = "mediatek,mt7623-bdpsys", + "mediatek,mt2701-bdpsys", + "syscon"; + reg = <0 0x1c000000 0 0x1000>; + #clock-cells = <1>; + }; }; &pio { diff --git a/dts/src/arm/omap2.dtsi b/dts/src/arm/omap2.dtsi index f1d6de8b3c..000bf16de6 100644 --- a/dts/src/arm/omap2.dtsi +++ b/dts/src/arm/omap2.dtsi @@ -114,7 +114,7 @@ dma-names = "tx", "rx"; }; - mcspi1: mcspi@48098000 { + mcspi1: spi@48098000 { compatible = "ti,omap2-mcspi"; ti,hwmods = "mcspi1"; reg = <0x48098000 0x100>; @@ -125,7 +125,7 @@ "tx2", "rx2", "tx3", "rx3"; }; - mcspi2: mcspi@4809a000 { + mcspi2: spi@4809a000 { compatible = "ti,omap2-mcspi"; ti,hwmods = "mcspi2"; reg = <0x4809a000 0x100>; diff --git a/dts/src/arm/omap2430.dtsi b/dts/src/arm/omap2430.dtsi index 84635eeb99..7f57af2f10 100644 --- a/dts/src/arm/omap2430.dtsi +++ b/dts/src/arm/omap2430.dtsi @@ -285,7 +285,7 @@ ti,timer-alwon; }; - mcspi3: mcspi@480b8000 { + mcspi3: spi@480b8000 { compatible = "ti,omap2-mcspi"; ti,hwmods = "mcspi3"; reg = <0x480b8000 0x100>; diff --git a/dts/src/arm/omap3-beagle-xm.dts b/dts/src/arm/omap3-beagle-xm.dts index d80587de0b..9985ee2aae 100644 --- a/dts/src/arm/omap3-beagle-xm.dts +++ b/dts/src/arm/omap3-beagle-xm.dts @@ -160,10 +160,11 @@ clocks = <&emu_src_ck>; clock-names = "apb_pclk"; - port { - etb_in: endpoint { - slave-mode; - remote-endpoint = <&etm_out>; + in-ports { + port { + etb_in: endpoint { + remote-endpoint = <&etm_out>; + }; }; }; }; @@ -174,9 +175,11 @@ clocks = <&emu_src_ck>; clock-names = "apb_pclk"; - port { - etm_out: endpoint { - remote-endpoint = <&etb_in>; + out-ports { + port { + etm_out: endpoint { + remote-endpoint = <&etb_in>; + }; }; }; }; diff --git a/dts/src/arm/omap3-beagle.dts b/dts/src/arm/omap3-beagle.dts index 3ca8991a6c..91bb50ad9a 100644 --- a/dts/src/arm/omap3-beagle.dts +++ b/dts/src/arm/omap3-beagle.dts @@ -147,10 +147,11 @@ clocks = <&emu_src_ck>; clock-names = "apb_pclk"; - port { - etb_in: endpoint { - slave-mode; - remote-endpoint = <&etm_out>; + in-ports { + port { + etb_in: endpoint { + remote-endpoint = <&etm_out>; + }; }; }; }; @@ -161,9 +162,11 @@ clocks = <&emu_src_ck>; clock-names = "apb_pclk"; - port { - etm_out: endpoint { - remote-endpoint = <&etb_in>; + out-ports { + port { + etm_out: endpoint { + remote-endpoint = <&etb_in>; + }; }; }; }; diff --git a/dts/src/arm/omap3-gta04.dtsi b/dts/src/arm/omap3-gta04.dtsi index ac830b9177..d5fe553922 100644 --- a/dts/src/arm/omap3-gta04.dtsi +++ b/dts/src/arm/omap3-gta04.dtsi @@ -10,6 +10,7 @@ /dts-v1/; #include "omap36xx.dtsi" +#include <dt-bindings/input/input.h> / { model = "OMAP3 GTA04"; @@ -28,6 +29,7 @@ aliases { display0 = &lcd; + display1 = &tv0; }; /* fixed 26MHz oscillator */ @@ -42,12 +44,27 @@ aux-button { label = "aux"; - linux,code = <169>; + linux,code = <KEY_PHONE>; gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; wakeup-source; }; }; + antenna-detect { + compatible = "gpio-keys"; + + gps_antenna_button: gps-antenna-button { + label = "GPS_EXT_ANT"; + linux,input-type = <EV_SW>; + linux,code = <SW_LINEIN_INSERT>; + gpios = <&gpio5 16 GPIO_ACTIVE_HIGH>; /* GPIO144 */ + interrupt-parent = <&gpio5>; + interrupts = <16 IRQ_TYPE_EDGE_BOTH>; + debounce-interval = <10>; + wakeup-source; + }; + }; + sound { compatible = "ti,omap-twl4030"; ti,model = "gta04"; @@ -55,7 +72,7 @@ ti,mcbsp = <&mcbsp2>; }; - /* GSM audio */ + /* GSM audio */ sound_telephony { compatible = "simple-audio-card"; simple-audio-card,name = "GTA04 voice"; @@ -78,7 +95,7 @@ #sound-dai-cells = <0>; }; - spi_lcd { + spi_lcd: spi_lcd { compatible = "spi-gpio"; #address-cells = <0x1>; #size-cells = <0x0>; @@ -131,7 +148,7 @@ }; tv0: connector { - compatible = "svideo-connector"; + compatible = "composite-video-connector"; label = "tv"; port { @@ -143,7 +160,7 @@ tv_amp: opa362 { compatible = "ti,opa362"; - enable-gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>; + enable-gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>; /* GPIO_23 to enable video out amplifier */ ports { #address-cells = <1>; @@ -169,6 +186,42 @@ compatible = "mmc-pwrseq-simple"; reset-gpios = <&tca6507 0 GPIO_ACTIVE_LOW>; /* W2CBW003 reset through tca6507 */ }; + + /* devconf0 setup for mcbsp1 clock pins */ + pinmux_mcbsp1@48002274 { + compatible = "pinctrl-single"; + reg = <0x48002274 4>; /* CONTROL_DEVCONF0 */ + #address-cells = <1>; + #size-cells = <0>; + pinctrl-single,bit-per-mux; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0x7>; /* MCBSP1 CLK pinmux */ + #pinctrl-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&mcbsp1_devconf0_pins>; + mcbsp1_devconf0_pins: pinmux_mcbsp1_devconf0_pins { + /* offset bits mask */ + pinctrl-single,bits = <0x00 0x08 0x1c>; /* set MCBSP1_CLKR */ + }; + }; + + /* devconf1 setup for tvout pins */ + pinmux_tv_out@480022d8 { + compatible = "pinctrl-single"; + reg = <0x480022d8 4>; /* CONTROL_DEVCONF1 */ + #address-cells = <1>; + #size-cells = <0>; + pinctrl-single,bit-per-mux; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0x81>; /* TV out pin control */ + #pinctrl-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&tv_acbias_devconf1_pins>; + tv_acbias_devconf1_pins: pinmux_tv_acbias_devconf1_pins { + /* offset bits mask */ + pinctrl-single,bits = <0x00 0x40800 0x40800>; /* set TVOUTBYPASS and TVOUTACEN */ + }; + }; }; &omap3_pmx_core { @@ -220,14 +273,14 @@ >; }; - backlight_pins: backlight_pins_pimnux { + backlight_pins: backlight_pins_pinmux { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x20ba, MUX_MODE3) /* gpt11/gpio57 */ >; }; dss_dpi_pins: pinmux_dss_dpi_pins { - pinctrl-single,pins = < + pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */ OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */ OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */ @@ -265,6 +318,12 @@ >; }; + bmp085_pins: pinmux_bmp085_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2136, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio113 */ + >; + }; + bma180_pins: pinmux_bma180_pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x213a, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio115 */ @@ -282,6 +341,78 @@ OMAP3_CORE1_IOPAD(0x2134, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio112 */ >; }; + + penirq_pins: pinmux_penirq_pins { + pinctrl-single,pins = < + /* here we could enable to wakeup the cpu from suspend by a pen touch */ + OMAP3_CORE1_IOPAD(0x2194, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio160 */ + >; + }; + + camera_pins: pinmux_camera_pins { + pinctrl-single,pins = < + /* set up parallel camera interface */ + OMAP3_CORE1_IOPAD(0x210c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_hs */ + OMAP3_CORE1_IOPAD(0x210e, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_vs */ + OMAP3_CORE1_IOPAD(0x2110, PIN_OUTPUT | MUX_MODE0) /* cam_xclka */ + OMAP3_CORE1_IOPAD(0x2112, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_pclk */ + OMAP3_CORE1_IOPAD(0x2114, PIN_OUTPUT | MUX_MODE4) /* cam_fld = gpio_98 */ + OMAP3_CORE1_IOPAD(0x2116, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d0 */ + OMAP3_CORE1_IOPAD(0x2118, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d1 */ + OMAP3_CORE1_IOPAD(0x211a, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d2 */ + OMAP3_CORE1_IOPAD(0x211c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d3 */ + OMAP3_CORE1_IOPAD(0x211e, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d4 */ + OMAP3_CORE1_IOPAD(0x2120, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d5 */ + OMAP3_CORE1_IOPAD(0x2122, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d6 */ + OMAP3_CORE1_IOPAD(0x2124, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d7 */ + OMAP3_CORE1_IOPAD(0x2126, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d8 */ + OMAP3_CORE1_IOPAD(0x2128, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d9 */ + OMAP3_CORE1_IOPAD(0x212a, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d10 */ + OMAP3_CORE1_IOPAD(0x212c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d10 */ + OMAP3_CORE1_IOPAD(0x212e, PIN_OUTPUT | MUX_MODE0) /* cam_xclkb */ + OMAP3_CORE1_IOPAD(0x2130, PIN_OUTPUT | MUX_MODE4) /* cam_wen = gpio_167 */ + OMAP3_CORE1_IOPAD(0x2132, PIN_INPUT_PULLDOWN | MUX_MODE4) /* cam_strobe */ + >; + }; + + mcbsp1_pins: pinmux_mcbsp1_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x218c, PIN_INPUT | MUX_MODE4) /* mcbsp1_clkr.mcbsp1_clkr - gpio_156 FM interrupt */ + OMAP3_CORE1_IOPAD(0x218e, PIN_OUTPUT | MUX_MODE0) /* mcbsp1_clkr.mcbsp1_fsr */ + OMAP3_CORE1_IOPAD(0x2190, PIN_OUTPUT | MUX_MODE0) /* mcbsp1_dx.mcbsp1_dx */ + OMAP3_CORE1_IOPAD(0x2192, PIN_INPUT | MUX_MODE0) /* mcbsp1_dx.mcbsp1_dr */ + /* mcbsp_clks is used as PENIRQ */ + /* OMAP3_CORE1_IOPAD(0x2194, PIN_INPUT | MUX_MODE0) /* mcbsp_clks.mcbsp_clks */ + OMAP3_CORE1_IOPAD(0x2196, PIN_INPUT | MUX_MODE0) /* mcbsp_clks.mcbsp1_fsx */ + OMAP3_CORE1_IOPAD(0x2198, PIN_INPUT | MUX_MODE0) /* mcbsp1_clkx.mcbsp1_clkx */ + >; + }; + + mcbsp2_pins: pinmux_mcbsp2_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0) /* mcbsp2_fsx.mcbsp2_fsx */ + OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0) /* mcbsp2_fsx.mcbsp2_clkx */ + OMAP3_CORE1_IOPAD(0x2140, PIN_INPUT | MUX_MODE0) /* mcbsp2_dr.mcbsp2_dr */ + OMAP3_CORE1_IOPAD(0x2142, PIN_OUTPUT | MUX_MODE0) /* mcbsp2_dr.mcbsp2_dx */ + >; + }; + + mcbsp3_pins: pinmux_mcbsp3_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x216c, PIN_OUTPUT | MUX_MODE0) /* mcbsp3_dx.mcbsp3_dx */ + OMAP3_CORE1_IOPAD(0x216e, PIN_INPUT | MUX_MODE0) /* mcbsp3_dx.mcbsp3_dr */ + OMAP3_CORE1_IOPAD(0x2170, PIN_INPUT | MUX_MODE0) /* mcbsp3_clkx.mcbsp3_clkx */ + OMAP3_CORE1_IOPAD(0x2172, PIN_INPUT | MUX_MODE0) /* mcbsp3_clkx.mcbsp3_fsx */ + >; + }; + + mcbsp4_pins: pinmux_mcbsp4_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcbsp4_clkx.mcbsp4_clkx */ + OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcbsp4_clkx.mcbsp4_dr */ + OMAP3_CORE1_IOPAD(0x218a, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcbsp4_dx.mcbsp4_fsx */ + >; + }; }; &omap3_pmx_core2 { @@ -347,6 +478,8 @@ bmp085@77 { compatible = "bosch,bmp085"; reg = <0x77>; + pinctrl-names = "default"; + pinctrl-0 = <&bmp085_pins>; interrupt-parent = <&gpio4>; interrupts = <17 IRQ_TYPE_EDGE_RISING>; /* GPIO_113 */ }; @@ -402,7 +535,7 @@ reg = <0x4>; }; - wifi_reset: wifi_reset@6 { + wifi_reset: wifi_reset@6 { /* reference as <&tca_gpios 0 0> since it is currently the only GPIO */ reg = <0x6>; compatible = "gpio"; }; @@ -422,10 +555,19 @@ tsc2007@48 { compatible = "ti,tsc2007"; reg = <0x48>; + pinctrl-names = "default"; + pinctrl-0 = <&penirq_pins>; interrupt-parent = <&gpio6>; interrupts = <0 IRQ_TYPE_EDGE_FALLING>; /* GPIO_160 */ - gpios = <&gpio6 0 GPIO_ACTIVE_LOW>; + gpios = <&gpio6 0 GPIO_ACTIVE_LOW>; /* GPIO_160 */ ti,x-plate-ohms = <600>; + touchscreen-size-x = <480>; + touchscreen-size-y = <640>; + touchscreen-max-pressure = <1000>; + touchscreen-fuzz-x = <3>; + touchscreen-fuzz-y = <8>; + touchscreen-fuzz-pressure = <10>; + touchscreen-inverted-y; }; /* RFID EEPROM */ @@ -462,6 +604,7 @@ vmmc-supply = <&vmmc1>; bus-width = <4>; ti,non-removable; + broken-cd; /* hardware has no CD */ }; &mmc2 { @@ -476,6 +619,19 @@ status = "disabled"; }; +#define BIT(x) (1 << (x)) +&twl_gpio { + /* pullups: BIT(2) */ + ti,pullups = <BIT(2)>; + /* + * pulldowns: + * BIT(0), BIT(1), BIT(6), BIT(7), BIT(8), BIT(13) + * BIT(15), BIT(16), BIT(17) + */ + ti,pulldowns = <(BIT(0) | BIT(1) | BIT(6) | BIT(7) | BIT(8) | + BIT(13) | BIT(15) | BIT(16) | BIT(17))>; +}; + &twl_keypad { status = "disabled"; }; @@ -493,6 +649,7 @@ &uart3 { pinctrl-names = "default"; pinctrl-0 = <&uart3_pins>; + interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>; }; &charger { @@ -510,7 +667,7 @@ &vaux2 { regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; - regulator-always-on; + regulator-always-on; /* we should never switch off while vio is on! */ }; /* camera */ @@ -531,6 +688,12 @@ regulator-max-microvolt = <3150000>; }; +/* Needed to power the DPI pins */ + +&vpll2 { + regulator-always-on; +}; + &dss { pinctrl-names = "default"; pinctrl-0 = < &dss_dpi_pins >; @@ -551,10 +714,14 @@ vdda-supply = <&vdac>; + #address-cells = <1>; + #size-cells = <0>; + port { + reg = <0>; venc_out: endpoint { remote-endpoint = <&opa_in>; - ti,channels = <2>; + ti,channels = <1>; ti,invert-polarity; }; }; @@ -569,27 +736,27 @@ interrupt-parent = <&gpmc>; interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ <1 IRQ_TYPE_NONE>; /* termcount */ + ti,nand-ecc-opt = "ham1"; + rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */ nand-bus-width = <16>; - ti,nand-ecc-opt = "bch8"; + #address-cells = <1>; + #size-cells = <1>; - gpmc,sync-clk-ps = <0>; + gpmc,device-width = <2>; gpmc,cs-on-ns = <0>; gpmc,cs-rd-off-ns = <44>; gpmc,cs-wr-off-ns = <44>; gpmc,adv-on-ns = <6>; gpmc,adv-rd-off-ns = <34>; gpmc,adv-wr-off-ns = <44>; - gpmc,we-off-ns = <40>; gpmc,oe-off-ns = <54>; + gpmc,we-off-ns = <40>; gpmc,access-ns = <64>; gpmc,rd-cycle-ns = <82>; gpmc,wr-cycle-ns = <82>; gpmc,wr-access-ns = <40>; gpmc,wr-data-mux-bus-ns = <0>; - gpmc,device-width = <2>; - - #address-cells = <1>; - #size-cells = <1>; + gpmc,sync-clk-ps = <0>; x-loader@0 { label = "X-Loader"; @@ -598,28 +765,51 @@ bootloaders@80000 { label = "U-Boot"; - reg = <0x80000 0x1e0000>; + reg = <0x80000 0x1c0000>; }; - bootloaders_env@260000 { + bootloaders_env@240000 { label = "U-Boot Env"; - reg = <0x260000 0x20000>; + reg = <0x240000 0x40000>; }; kernel@280000 { label = "Kernel"; - reg = <0x280000 0x400000>; + reg = <0x280000 0x600000>; }; - filesystem@680000 { + filesystem@880000 { label = "File System"; - reg = <0x680000 0xf980000>; + reg = <0x880000 0>; /* 0 = MTDPART_SIZ_FULL */ }; }; }; -&mcbsp2 { - status = "okay"; +&mcbsp1 { /* FM Transceiver PCM */ + status = "ok"; + #sound-dai-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&mcbsp1_pins>; +}; + +&mcbsp2 { /* TPS65950 I2S */ + status = "ok"; + pinctrl-names = "default"; + pinctrl-0 = <&mcbsp2_pins>; +}; + +&mcbsp3 { /* Bluetooth PCM */ + status = "ok"; + #sound-dai-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&mcbsp3_pins>; +}; + +&mcbsp4 { /* GSM voice PCM */ + status = "ok"; + #sound-dai-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&mcbsp4_pins>; }; &hdqw1w { @@ -627,6 +817,22 @@ pinctrl-0 = <&hdq_pins>; }; -&mcbsp4 { - status = "okay"; +/* image signal processor within OMAP3 SoC */ +&isp { + ports { + port@0 { + reg = <0>; + parallel_ep: endpoint { + ti,isp-clock-divisor = <1>; + ti,strobe-mode; + bus-width = <8>;/* Used data lines */ + data-shift = <2>; /* Lines 9:2 are used */ + hsync-active = <0>; /* Active low */ + vsync-active = <1>; /* Active high */ + data-active = <1>;/* Active high */ + pclk-sample = <1>;/* Falling */ + }; + }; + /* port@1 and port@2 are not used by GTA04 */ + }; }; diff --git a/dts/src/arm/omap3-gta04a3.dts b/dts/src/arm/omap3-gta04a3.dts index 3099a892cf..cc92449566 100644 --- a/dts/src/arm/omap3-gta04a3.dts +++ b/dts/src/arm/omap3-gta04a3.dts @@ -9,7 +9,7 @@ #include "omap3-gta04.dtsi" / { - model = "Goldelico GTA04A3"; + model = "Goldelico GTA04A3/Letux 2804"; }; &i2c2 { diff --git a/dts/src/arm/omap3-gta04a4.dts b/dts/src/arm/omap3-gta04a4.dts index c918bb1f05..77afc711fe 100644 --- a/dts/src/arm/omap3-gta04a4.dts +++ b/dts/src/arm/omap3-gta04a4.dts @@ -9,5 +9,5 @@ #include "omap3-gta04.dtsi" / { - model = "Goldelico GTA04A4"; + model = "Goldelico GTA04A4/Letux 2804"; }; diff --git a/dts/src/arm/omap3-gta04a5.dts b/dts/src/arm/omap3-gta04a5.dts index 600b6ca5a1..bd232b1b24 100644 --- a/dts/src/arm/omap3-gta04a5.dts +++ b/dts/src/arm/omap3-gta04a5.dts @@ -1,5 +1,5 @@ /* - * Copyright (C) 2014 H. Nikolaus Schaller <hns@goldelico.com> + * Copyright (C) 2014-18 H. Nikolaus Schaller <hns@goldelico.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -9,9 +9,132 @@ #include "omap3-gta04.dtsi" / { - model = "Goldelico GTA04A5"; + model = "Goldelico GTA04A5/Letux 2804"; sound { - ti,jack-det-gpio = <&twl_gpio 2 GPIO_ACTIVE_HIGH>; /* GTA04A5 only */ + ti,jack-det-gpio = <&twl_gpio 2 GPIO_ACTIVE_HIGH>; /* GTA04A5 only */ + }; + + wlan_en: wlan_en_regulator { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&wlan_pins>; + regulator-name = "wlan-en-regulator"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&gpio5 10 GPIO_ACTIVE_HIGH>; /* GPIO_138 */ + + startup-delay-us = <70000>; + enable-active-high; + }; + + pps { + compatible = "pps-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pps_pins>; + + gpios = <&gpio4 18 GPIO_ACTIVE_HIGH>; /* GPIN_114 */ + }; + +}; + +&gpio5 { + irda_en { + gpio-hog; + gpios = <(175-160) GPIO_ACTIVE_HIGH>; + output-high; /* activate gpio_175 to disable IrDA receiver */ + }; +}; + +&omap3_pmx_core { + bt_pins: pinmux_bt_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE4) /* mmc2_dat5 = mmc3_dat1 = gpio137 */ + >; + }; + + wlan_pins: pinmux_wlan_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE4) /* mmc2_dat6 = mmc3_dat2 = gpio138 */ + >; + }; + + wlan_irq_pin: pinmux_wlan_irq_pin { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE4) /* mmc2_dat7 = mmc3_dat3 = gpio139 */ + >; + }; + + irda_pins: pinmux_irda { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21d0, PIN_OUTPUT_PULLUP | MUX_MODE4) /* mcspi1_cs1 = gpio175 */ + >; + }; + + pps_pins: pinmux_pps_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2138, PIN_INPUT | MUX_MODE4) /* gpin114 */ + >; + }; + +}; + +/* + * for WL183x module see + * http://lxr.free-electrons.com/source/Documentation/devicetree/bindings/net/wireless/ti,wlcore.txt + */ + +&wifi_pwrseq { + /delete-property/ reset-gpios; +}; + +&mmc2 { + vmmc-supply = <&wlan_en>; + bus-width = <4>; + cap-power-off-card; + non-removable; + + pinctrl-names = "default"; + pinctrl-0 = <&wlan_irq_pin>; + + #address-cells = <1>; + #size-cells = <0>; + + /delete-property/ mmc-pwrseq; + + wlcore: wlcore@2 { + compatible = "ti,wl1837"; + reg = <2>; + interrupt-parent = <&gpio5>; + interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; /* GPIO_139 */ + ref-clock-frequency = <26000000>; + }; +}; + +&i2c2 { + /delete-node/ bmp085@77; + /delete-node/ bma180@41; + /delete-node/ itg3200@68; + /delete-node/ hmc5843@1e; + + bmg160@69 { + compatible = "bosch,bmg160"; + reg = <0x69>; + }; + + bmc150@10 { + compatible = "bosch,bmc150_accel"; + reg = <0x10>; + }; + + bmc150@12 { + compatible = "bosch,bmc150_magn"; + reg = <0x12>; + }; + + bme280@76 { + compatible = "bosch,bme280"; + reg = <0x76>; }; }; diff --git a/dts/src/arm/omap3-gta04a5one.dts b/dts/src/arm/omap3-gta04a5one.dts new file mode 100644 index 0000000000..9b7bbdc344 --- /dev/null +++ b/dts/src/arm/omap3-gta04a5one.dts @@ -0,0 +1,114 @@ +/* + * Copyright (C) 2014-18 H. Nikolaus Schaller <hns@goldelico.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "omap3-gta04a5.dts" + +&omap3_pmx_core { + model = "Goldelico GTA04A5/Letux 2804 with OneNAND"; + + gpmc_pins: pinmux_gpmc_pins { + pinctrl-single,pins = < + + /* address lines */ + OMAP3_CORE1_IOPAD(0x207a, PIN_OUTPUT | MUX_MODE0) /* gpmc_a1.gpmc_a1 */ + OMAP3_CORE1_IOPAD(0x207c, PIN_OUTPUT | MUX_MODE0) /* gpmc_a2.gpmc_a2 */ + OMAP3_CORE1_IOPAD(0x207e, PIN_OUTPUT | MUX_MODE0) /* gpmc_a3.gpmc_a3 */ + + /* data lines, gpmc_d0..d7 not muxable according to TRM */ + OMAP3_CORE1_IOPAD(0x209e, PIN_INPUT | MUX_MODE0) /* gpmc_d8.gpmc_d8 */ + OMAP3_CORE1_IOPAD(0x20a0, PIN_INPUT | MUX_MODE0) /* gpmc_d9.gpmc_d9 */ + OMAP3_CORE1_IOPAD(0x20a2, PIN_INPUT | MUX_MODE0) /* gpmc_d10.gpmc_d10 */ + OMAP3_CORE1_IOPAD(0x20a4, PIN_INPUT | MUX_MODE0) /* gpmc_d11.gpmc_d11 */ + OMAP3_CORE1_IOPAD(0x20a6, PIN_INPUT | MUX_MODE0) /* gpmc_d12.gpmc_d12 */ + OMAP3_CORE1_IOPAD(0x20a8, PIN_INPUT | MUX_MODE0) /* gpmc_d13.gpmc_d13 */ + OMAP3_CORE1_IOPAD(0x20aa, PIN_INPUT | MUX_MODE0) /* gpmc_d14.gpmc_d14 */ + OMAP3_CORE1_IOPAD(0x20ac, PIN_INPUT | MUX_MODE0) /* gpmc_d15.gpmc_d15 */ + + /* + * gpmc_ncs0, gpmc_nadv_ale, gpmc_noe, gpmc_nwe, gpmc_wait0 not muxable + * according to TRM. OneNAND seems to require PIN_INPUT on clock. + */ + OMAP3_CORE1_IOPAD(0x20b0, PIN_OUTPUT | MUX_MODE0) /* gpmc_ncs1.gpmc_ncs1 */ + OMAP3_CORE1_IOPAD(0x20be, PIN_INPUT | MUX_MODE0) /* gpmc_clk.gpmc_clk */ + >; + }; +}; + +&gpmc { + /* switch inherited setup to OneNAND */ + + ranges = <0 0 0x04000000 0x1000000>; /* CS0: 16MB for OneNAND */ + pinctrl-names = "default"; + pinctrl-0 = <&gpmc_pins>; + + /delete-node/ nand@0,0; + + onenand@0,0 { + + #address-cells = <1>; + #size-cells = <1>; + compatible = "ti,omap2-onenand"; + reg = <0 0 0x20000>; /* CS0, offset 0, IO size 128K */ + + gpmc,sync-read; + gpmc,sync-write; + gpmc,burst-length = <16>; + gpmc,burst-read; + gpmc,burst-wrap; + gpmc,burst-write; + gpmc,device-width = <2>; + gpmc,mux-add-data = <2>; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <87>; + gpmc,cs-wr-off-ns = <87>; + gpmc,adv-on-ns = <0>; + gpmc,adv-rd-off-ns = <10>; + gpmc,adv-wr-off-ns = <10>; + gpmc,oe-on-ns = <15>; + gpmc,oe-off-ns = <87>; + gpmc,we-on-ns = <0>; + gpmc,we-off-ns = <87>; + gpmc,rd-cycle-ns = <112>; + gpmc,wr-cycle-ns = <112>; + gpmc,access-ns = <81>; + gpmc,page-burst-access-ns = <15>; + gpmc,bus-turnaround-ns = <0>; + gpmc,cycle2cycle-delay-ns = <0>; + gpmc,wait-monitoring-ns = <0>; + gpmc,clk-activation-ns = <5>; + gpmc,wr-data-mux-bus-ns = <30>; + gpmc,wr-access-ns = <81>; + gpmc,sync-clk-ps = <15000>; + + x-loader@0 { + label = "X-Loader"; + reg = <0 0x80000>; + }; + + bootloaders@80000 { + label = "U-Boot"; + reg = <0x80000 0x1c0000>; + }; + + bootloaders_env@240000 { + label = "U-Boot Env"; + reg = <0x240000 0x40000>; + }; + + kernel@280000 { + label = "Kernel"; + reg = <0x280000 0x600000>; + }; + + filesystem@880000 { + label = "File System"; + reg = <0x880000 0>; /* 0 = MTDPART_SIZ_FULL */ + }; + + }; +}; diff --git a/dts/src/arm/omap3-n9.dts b/dts/src/arm/omap3-n9.dts index ded5fcf084..1f91646b89 100644 --- a/dts/src/arm/omap3-n9.dts +++ b/dts/src/arm/omap3-n9.dts @@ -40,7 +40,7 @@ }; &i2c3 { - ak8975@0f { + ak8975@f { compatible = "asahi-kasei,ak8975"; reg = <0x0f>; }; diff --git a/dts/src/arm/omap5-board-common.dtsi b/dts/src/arm/omap5-board-common.dtsi index ab6f640b28..bf7ca00f4c 100644 --- a/dts/src/arm/omap5-board-common.dtsi +++ b/dts/src/arm/omap5-board-common.dtsi @@ -700,6 +700,10 @@ vbus-supply = <&smps10_out1_reg>; }; +&dwc3 { + dr_mode = "otg"; +}; + &mcspi1 { }; diff --git a/dts/src/arm/orion5x-linkstation.dtsi b/dts/src/arm/orion5x-linkstation.dtsi index ebd93df5d0..b6c9b85951 100644 --- a/dts/src/arm/orion5x-linkstation.dtsi +++ b/dts/src/arm/orion5x-linkstation.dtsi @@ -156,7 +156,7 @@ &i2c { status = "okay"; - rtc { + rtc@32 { compatible = "ricoh,rs5c372a"; reg = <0x32>; }; diff --git a/dts/src/arm/owl-s500-cubieboard6.dts b/dts/src/arm/owl-s500-cubieboard6.dts index ea4e01bce8..7c96c59b61 100644 --- a/dts/src/arm/owl-s500-cubieboard6.dts +++ b/dts/src/arm/owl-s500-cubieboard6.dts @@ -1,9 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Cubietech CubieBoard6 * * Copyright (c) 2017 Andreas Färber - * - * SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ /dts-v1/; diff --git a/dts/src/arm/owl-s500-guitar-bb-rev-b.dts b/dts/src/arm/owl-s500-guitar-bb-rev-b.dts index 7be1d2eaf3..e610d49395 100644 --- a/dts/src/arm/owl-s500-guitar-bb-rev-b.dts +++ b/dts/src/arm/owl-s500-guitar-bb-rev-b.dts @@ -1,7 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2016-2017 Andreas Färber - * - * SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ /dts-v1/; diff --git a/dts/src/arm/owl-s500-guitar.dtsi b/dts/src/arm/owl-s500-guitar.dtsi index 079b2c02cc..81cc39871f 100644 --- a/dts/src/arm/owl-s500-guitar.dtsi +++ b/dts/src/arm/owl-s500-guitar.dtsi @@ -1,9 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * LeMaker Guitar SoM * * Copyright (c) 2016-2017 Andreas Färber - * - * SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ #include "owl-s500.dtsi" diff --git a/dts/src/arm/owl-s500.dtsi b/dts/src/arm/owl-s500.dtsi index 43c9980a42..5ceb6cc445 100644 --- a/dts/src/arm/owl-s500.dtsi +++ b/dts/src/arm/owl-s500.dtsi @@ -1,9 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Actions Semi S500 SoC * * Copyright (c) 2016-2017 Andreas Färber - * - * SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/dts/src/arm/pxa25x.dtsi b/dts/src/arm/pxa25x.dtsi index 95d59be972..8494b57871 100644 --- a/dts/src/arm/pxa25x.dtsi +++ b/dts/src/arm/pxa25x.dtsi @@ -80,6 +80,10 @@ #pwm-cells = <1>; clocks = <&clks CLK_PWM1>; }; + + rtc@40900000 { + clocks = <&clks CLK_OSC32k768>; + }; }; timer@40a00000 { diff --git a/dts/src/arm/pxa27x.dtsi b/dts/src/arm/pxa27x.dtsi index 747f750f67..3228ad5fb7 100644 --- a/dts/src/arm/pxa27x.dtsi +++ b/dts/src/arm/pxa27x.dtsi @@ -71,7 +71,7 @@ clocks = <&clks CLK_PWM1>; }; - pwri2c: i2c@40f000180 { + pwri2c: i2c@40f00180 { compatible = "mrvl,pxa-i2c"; reg = <0x40f00180 0x24>; interrupts = <6>; @@ -113,6 +113,10 @@ status = "disabled"; }; + + rtc@40900000 { + clocks = <&clks CLK_OSC32k768>; + }; }; clocks { diff --git a/dts/src/arm/pxa2xx.dtsi b/dts/src/arm/pxa2xx.dtsi index a520b4c14e..080d5c5169 100644 --- a/dts/src/arm/pxa2xx.dtsi +++ b/dts/src/arm/pxa2xx.dtsi @@ -9,6 +9,25 @@ #include "skeleton.dtsi" #include "dt-bindings/clock/pxa-clock.h" +#define PMGROUP(pin) #pin +#define PMMUX(func, pin, af) \ + mux- ## func { \ + groups = PMGROUP(P ## pin); \ + function = #af; \ + } +#define PMMUX_LPM_LOW(func, pin, af) \ + mux- ## func { \ + groups = PMGROUP(P ## pin); \ + function = #af; \ + low-power-disable; \ + } +#define PMMUX_LPM_HIGH(func, pin, af) \ + mux- ## func { \ + groups = PMGROUP(P ## pin); \ + function = #af; \ + low-power-enable; \ + } + / { model = "Marvell PXA2xx family SoC"; compatible = "marvell,pxa2xx"; @@ -76,7 +95,7 @@ }; }; - ffuart: uart@40100000 { + ffuart: serial@40100000 { compatible = "mrvl,pxa-uart"; reg = <0x40100000 0x30>; interrupts = <22>; @@ -84,7 +103,7 @@ status = "disabled"; }; - btuart: uart@40200000 { + btuart: serial@40200000 { compatible = "mrvl,pxa-uart"; reg = <0x40200000 0x30>; interrupts = <21>; @@ -92,7 +111,7 @@ status = "disabled"; }; - stuart: uart@40700000 { + stuart: serial@40700000 { compatible = "mrvl,pxa-uart"; reg = <0x40700000 0x30>; interrupts = <20>; @@ -100,7 +119,7 @@ status = "disabled"; }; - hwuart: uart@41100000 { + hwuart: serial@41100000 { compatible = "mrvl,pxa-uart"; reg = <0x41100000 0x30>; interrupts = <7>; diff --git a/dts/src/arm/qcom-apq8064.dtsi b/dts/src/arm/qcom-apq8064.dtsi index 4a99c92551..48c3cf4276 100644 --- a/dts/src/arm/qcom-apq8064.dtsi +++ b/dts/src/arm/qcom-apq8064.dtsi @@ -1611,10 +1611,11 @@ clocks = <&rpmcc RPM_QDSS_CLK>; clock-names = "apb_pclk"; - port { - etb_in: endpoint { - slave-mode; - remote-endpoint = <&replicator_out0>; + in-ports { + port { + etb_in: endpoint { + remote-endpoint = <&replicator_out0>; + }; }; }; }; @@ -1626,10 +1627,11 @@ clocks = <&rpmcc RPM_QDSS_CLK>; clock-names = "apb_pclk"; - port { - tpiu_in: endpoint { - slave-mode; - remote-endpoint = <&replicator_out1>; + in-ports { + port { + tpiu_in: endpoint { + remote-endpoint = <&replicator_out1>; + }; }; }; }; @@ -1640,7 +1642,7 @@ clocks = <&rpmcc RPM_QDSS_CLK>; clock-names = "apb_pclk"; - ports { + out-ports { #address-cells = <1>; #size-cells = <0>; @@ -1656,10 +1658,11 @@ remote-endpoint = <&tpiu_in>; }; }; - port@2 { - reg = <0>; + }; + + in-ports { + port { replicator_in: endpoint { - slave-mode; remote-endpoint = <&funnel_out>; }; }; @@ -1673,7 +1676,7 @@ clocks = <&rpmcc RPM_QDSS_CLK>; clock-names = "apb_pclk"; - ports { + in-ports { #address-cells = <1>; #size-cells = <0>; @@ -1687,33 +1690,31 @@ port@0 { reg = <0>; funnel_in0: endpoint { - slave-mode; remote-endpoint = <&etm0_out>; }; }; port@1 { reg = <1>; funnel_in1: endpoint { - slave-mode; remote-endpoint = <&etm1_out>; }; }; port@4 { reg = <4>; funnel_in4: endpoint { - slave-mode; remote-endpoint = <&etm2_out>; }; }; port@5 { reg = <5>; funnel_in5: endpoint { - slave-mode; remote-endpoint = <&etm3_out>; }; }; - port@8 { - reg = <0>; + }; + + out-ports { + port { funnel_out: endpoint { remote-endpoint = <&replicator_in>; }; @@ -1730,9 +1731,11 @@ cpu = <&CPU0>; - port { - etm0_out: endpoint { - remote-endpoint = <&funnel_in0>; + out-ports { + port { + etm0_out: endpoint { + remote-endpoint = <&funnel_in0>; + }; }; }; }; @@ -1746,9 +1749,11 @@ cpu = <&CPU1>; - port { - etm1_out: endpoint { - remote-endpoint = <&funnel_in1>; + out-ports { + port { + etm1_out: endpoint { + remote-endpoint = <&funnel_in1>; + }; }; }; }; @@ -1762,9 +1767,11 @@ cpu = <&CPU2>; - port { - etm2_out: endpoint { - remote-endpoint = <&funnel_in4>; + out-ports { + port { + etm2_out: endpoint { + remote-endpoint = <&funnel_in4>; + }; }; }; }; @@ -1778,9 +1785,11 @@ cpu = <&CPU3>; - port { - etm3_out: endpoint { - remote-endpoint = <&funnel_in5>; + out-ports { + port { + etm3_out: endpoint { + remote-endpoint = <&funnel_in5>; + }; }; }; }; diff --git a/dts/src/arm/qcom-ipq4019.dtsi b/dts/src/arm/qcom-ipq4019.dtsi index 78db67337e..2d56008d8d 100644 --- a/dts/src/arm/qcom-ipq4019.dtsi +++ b/dts/src/arm/qcom-ipq4019.dtsi @@ -52,78 +52,85 @@ cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a7"; - enable-method = "qcom,kpss-acc-v1"; + enable-method = "qcom,kpss-acc-v2"; + next-level-cache = <&L2>; qcom,acc = <&acc0>; qcom,saw = <&saw0>; reg = <0x0>; clocks = <&gcc GCC_APPS_CLK_SRC>; clock-frequency = <0>; - operating-points = < - /* kHz uV (fixed) */ - 48000 1100000 - 200000 1100000 - 500000 1100000 - 716000 1100000 - >; clock-latency = <256000>; + operating-points-v2 = <&cpu0_opp_table>; }; cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a7"; - enable-method = "qcom,kpss-acc-v1"; + enable-method = "qcom,kpss-acc-v2"; + next-level-cache = <&L2>; qcom,acc = <&acc1>; qcom,saw = <&saw1>; reg = <0x1>; clocks = <&gcc GCC_APPS_CLK_SRC>; clock-frequency = <0>; - operating-points = < - /* kHz uV (fixed) */ - 48000 1100000 - 200000 1100000 - 500000 1100000 - 666000 1100000 - >; clock-latency = <256000>; + operating-points-v2 = <&cpu0_opp_table>; }; cpu@2 { device_type = "cpu"; compatible = "arm,cortex-a7"; - enable-method = "qcom,kpss-acc-v1"; + enable-method = "qcom,kpss-acc-v2"; + next-level-cache = <&L2>; qcom,acc = <&acc2>; qcom,saw = <&saw2>; reg = <0x2>; clocks = <&gcc GCC_APPS_CLK_SRC>; clock-frequency = <0>; - operating-points = < - /* kHz uV (fixed) */ - 48000 1100000 - 200000 1100000 - 500000 1100000 - 666000 1100000 - >; clock-latency = <256000>; + operating-points-v2 = <&cpu0_opp_table>; }; cpu@3 { device_type = "cpu"; compatible = "arm,cortex-a7"; - enable-method = "qcom,kpss-acc-v1"; + enable-method = "qcom,kpss-acc-v2"; + next-level-cache = <&L2>; qcom,acc = <&acc3>; qcom,saw = <&saw3>; reg = <0x3>; clocks = <&gcc GCC_APPS_CLK_SRC>; clock-frequency = <0>; - operating-points = < - /* kHz uV (fixed) */ - 48000 1100000 - 200000 1100000 - 500000 1100000 - 666000 1100000 - >; clock-latency = <256000>; + operating-points-v2 = <&cpu0_opp_table>; }; + + L2: l2-cache { + compatible = "cache"; + cache-level = <2>; + }; + }; + + cpu0_opp_table: opp_table0 { + compatible = "operating-points-v2"; + opp-shared; + + opp-48000000 { + opp-hz = /bits/ 64 <48000000>; + clock-latency-ns = <256000>; + }; + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + clock-latency-ns = <256000>; + }; + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + clock-latency-ns = <256000>; + }; + opp-716000000 { + opp-hz = /bits/ 64 <716000000>; + clock-latency-ns = <256000>; + }; }; pmu { @@ -291,49 +298,49 @@ status = "disabled"; }; - acc0: clock-controller@b088000 { - compatible = "qcom,kpss-acc-v1"; - reg = <0x0b088000 0x1000>, <0xb008000 0x1000>; - }; + acc0: clock-controller@b088000 { + compatible = "qcom,kpss-acc-v2"; + reg = <0x0b088000 0x1000>, <0xb008000 0x1000>; + }; - acc1: clock-controller@b098000 { - compatible = "qcom,kpss-acc-v1"; - reg = <0x0b098000 0x1000>, <0xb008000 0x1000>; - }; + acc1: clock-controller@b098000 { + compatible = "qcom,kpss-acc-v2"; + reg = <0x0b098000 0x1000>, <0xb008000 0x1000>; + }; - acc2: clock-controller@b0a8000 { - compatible = "qcom,kpss-acc-v1"; - reg = <0x0b0a8000 0x1000>, <0xb008000 0x1000>; - }; + acc2: clock-controller@b0a8000 { + compatible = "qcom,kpss-acc-v2"; + reg = <0x0b0a8000 0x1000>, <0xb008000 0x1000>; + }; - acc3: clock-controller@b0b8000 { - compatible = "qcom,kpss-acc-v1"; - reg = <0x0b0b8000 0x1000>, <0xb008000 0x1000>; - }; + acc3: clock-controller@b0b8000 { + compatible = "qcom,kpss-acc-v2"; + reg = <0x0b0b8000 0x1000>, <0xb008000 0x1000>; + }; - saw0: regulator@b089000 { - compatible = "qcom,saw2"; - reg = <0x02089000 0x1000>, <0x0b009000 0x1000>; + saw0: regulator@b089000 { + compatible = "qcom,saw2"; + reg = <0x0b089000 0x1000>, <0x0b009000 0x1000>; regulator; - }; + }; - saw1: regulator@b099000 { - compatible = "qcom,saw2"; - reg = <0x0b099000 0x1000>, <0x0b009000 0x1000>; - regulator; - }; + saw1: regulator@b099000 { + compatible = "qcom,saw2"; + reg = <0x0b099000 0x1000>, <0x0b009000 0x1000>; + regulator; + }; - saw2: regulator@b0a9000 { - compatible = "qcom,saw2"; - reg = <0x0b0a9000 0x1000>, <0x0b009000 0x1000>; - regulator; - }; + saw2: regulator@b0a9000 { + compatible = "qcom,saw2"; + reg = <0x0b0a9000 0x1000>, <0x0b009000 0x1000>; + regulator; + }; - saw3: regulator@b0b9000 { - compatible = "qcom,saw2"; - reg = <0x0b0b9000 0x1000>, <0x0b009000 0x1000>; - regulator; - }; + saw3: regulator@b0b9000 { + compatible = "qcom,saw2"; + reg = <0x0b0b9000 0x1000>, <0x0b009000 0x1000>; + regulator; + }; blsp1_uart1: serial@78af000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; @@ -387,7 +394,7 @@ #size-cells = <2>; ranges = <0x81000000 0 0x40200000 0x40200000 0 0x00100000 - 0x82000000 0 0x48000000 0x48000000 0 0x10000000>; + 0x82000000 0 0x40300000 0x40300000 0 0x400000>; interrupts = <GIC_SPI 141 IRQ_TYPE_EDGE_RISING>; interrupt-names = "msi"; diff --git a/dts/src/arm/qcom-ipq8064-ap148.dts b/dts/src/arm/qcom-ipq8064-ap148.dts index bcf53e37ed..554c65e7aa 100644 --- a/dts/src/arm/qcom-ipq8064-ap148.dts +++ b/dts/src/arm/qcom-ipq8064-ap148.dts @@ -2,26 +2,8 @@ #include "qcom-ipq8064-v1.0.dtsi" / { - model = "Qualcomm IPQ8064/AP148"; - compatible = "qcom,ipq8064-ap148", "qcom,ipq8064"; - - aliases { - serial0 = &gsbi4_serial; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - reserved-memory { - #address-cells = <1>; - #size-cells = <1>; - ranges; - rsvd@41200000 { - reg = <0x41200000 0x300000>; - no-map; - }; - }; + model = "Qualcomm Technologies, Inc. IPQ8064/AP-148"; + compatible = "qcom,ipq8064-ap148"; soc { pinmux@800000 { @@ -31,73 +13,22 @@ bias-disable; }; - spi_pins: spi_pins { + buttons_pins: buttons_pins { mux { - pins = "gpio18", "gpio19", "gpio21"; - function = "gsbi5"; - drive-strength = <10>; - bias-none; + pins = "gpio54", "gpio65"; + drive-strength = <2>; + bias-pull-up; }; }; }; gsbi@16300000 { - qcom,mode = <GSBI_PROT_I2C_UART>; - status = "ok"; - serial@16340000 { + i2c@16380000 { status = "ok"; - }; - - i2c4: i2c@16380000 { - status = "ok"; - clock-frequency = <200000>; - pinctrl-0 = <&i2c4_pins>; pinctrl-names = "default"; }; }; - - gsbi5: gsbi@1a200000 { - qcom,mode = <GSBI_PROT_SPI>; - status = "ok"; - - spi4: spi@1a280000 { - status = "ok"; - spi-max-frequency = <50000000>; - - pinctrl-0 = <&spi_pins>; - pinctrl-names = "default"; - - cs-gpios = <&qcom_pinmux 20 0>; - - flash: m25p80@0 { - compatible = "s25fl256s1"; - #address-cells = <1>; - #size-cells = <1>; - spi-max-frequency = <50000000>; - reg = <0>; - - partition@0 { - label = "rootfs"; - reg = <0x0 0x1000000>; - }; - - partition@1 { - label = "scratch"; - reg = <0x1000000 0x1000000>; - }; - }; - }; - }; - - sata-phy@1b400000 { - status = "ok"; - }; - - sata@29000000 { - ports-implemented = <0x1>; - status = "ok"; - }; }; }; diff --git a/dts/src/arm/qcom-ipq8064-v1.0.dtsi b/dts/src/arm/qcom-ipq8064-v1.0.dtsi index e1181194e8..e239a04869 100644 --- a/dts/src/arm/qcom-ipq8064-v1.0.dtsi +++ b/dts/src/arm/qcom-ipq8064-v1.0.dtsi @@ -1,2 +1,127 @@ // SPDX-License-Identifier: GPL-2.0 #include "qcom-ipq8064.dtsi" +#include <dt-bindings/input/input.h> + +/ { + model = "Qualcomm Technologies, Inc. IPQ8064-v1.0"; + + aliases { + serial0 = &gsbi4_serial; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + soc { + gsbi@16300000 { + qcom,mode = <GSBI_PROT_I2C_UART>; + status = "ok"; + + serial@16340000 { + status = "ok"; + }; + }; + + gsbi5: gsbi@1a200000 { + qcom,mode = <GSBI_PROT_SPI>; + status = "ok"; + + spi4: spi@1a280000 { + status = "ok"; + spi-max-frequency = <50000000>; + + pinctrl-0 = <&spi_pins>; + pinctrl-names = "default"; + + cs-gpios = <&qcom_pinmux 20 0>; + + flash: m25p80@0 { + compatible = "s25fl256s1"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <50000000>; + reg = <0>; + + partition@0 { + label = "rootfs"; + reg = <0x0 0x1000000>; + }; + + partition@1 { + label = "scratch"; + reg = <0x1000000 0x1000000>; + }; + }; + }; + }; + + sata-phy@1b400000 { + status = "ok"; + }; + + sata@29000000 { + ports-implemented = <0x1>; + status = "ok"; + }; + + gpio_keys { + compatible = "gpio-keys"; + pinctrl-0 = <&buttons_pins>; + pinctrl-names = "default"; + + button@1 { + label = "reset"; + linux,code = <KEY_RESTART>; + gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + debounce-interval = <60>; + }; + button@2 { + label = "wps"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + debounce-interval = <60>; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-0 = <&leds_pins>; + pinctrl-names = "default"; + + led@7 { + label = "led_usb1"; + gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "usbdev"; + default-state = "off"; + }; + + led@8 { + label = "led_usb3"; + gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "usbdev"; + default-state = "off"; + }; + + led@9 { + label = "status_led_fail"; + gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led@26 { + label = "sata_led"; + gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led@53 { + label = "status_led_pass"; + gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; + }; +}; diff --git a/dts/src/arm/qcom-ipq8064.dtsi b/dts/src/arm/qcom-ipq8064.dtsi index 70790ac242..f793cd1ad6 100644 --- a/dts/src/arm/qcom-ipq8064.dtsi +++ b/dts/src/arm/qcom-ipq8064.dtsi @@ -2,8 +2,11 @@ /dts-v1/; #include "skeleton.dtsi" +#include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,gcc-ipq806x.h> #include <dt-bindings/clock/qcom,lcc-ipq806x.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/reset/qcom,gcc-ipq806x.h> #include <dt-bindings/soc/qcom,gsbi.h> #include <dt-bindings/interrupt-controller/arm-gic.h> @@ -114,6 +117,61 @@ interrupt-controller; #interrupt-cells = <2>; interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + + pcie0_pins: pcie0_pinmux { + mux { + pins = "gpio3"; + function = "pcie1_rst"; + drive-strength = <12>; + bias-disable; + }; + }; + + pcie1_pins: pcie1_pinmux { + mux { + pins = "gpio48"; + function = "pcie2_rst"; + drive-strength = <12>; + bias-disable; + }; + }; + + pcie2_pins: pcie2_pinmux { + mux { + pins = "gpio63"; + function = "pcie3_rst"; + drive-strength = <12>; + bias-disable; + }; + }; + + spi_pins: spi_pins { + mux { + pins = "gpio18", "gpio19", "gpio21"; + function = "gsbi5"; + drive-strength = <10>; + bias-none; + }; + }; + + leds_pins: leds_pins { + mux { + pins = "gpio7", "gpio8", "gpio9", + "gpio26", "gpio53"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + output-low; + }; + }; + + buttons_pins: buttons_pins { + mux { + pins = "gpio54"; + drive-strength = <2>; + bias-pull-up; + }; + }; }; intc: interrupt-controller@2000000 { @@ -373,5 +431,233 @@ #reset-cells = <1>; }; + pcie0: pci@1b500000 { + compatible = "qcom,pcie-ipq8064"; + reg = <0x1b500000 0x1000 + 0x1b502000 0x80 + 0x1b600000 0x100 + 0x0ff00000 0x100000>; + reg-names = "dbi", "elbi", "parf", "config"; + device_type = "pci"; + linux,pci-domain = <0>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x81000000 0 0x0fe00000 0x0fe00000 0 0x00100000 /* downstream I/O */ + 0x82000000 0 0x08000000 0x08000000 0 0x07e00000>; /* non-prefetchable memory */ + + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc PCIE_A_CLK>, + <&gcc PCIE_H_CLK>, + <&gcc PCIE_PHY_CLK>, + <&gcc PCIE_AUX_CLK>, + <&gcc PCIE_ALT_REF_CLK>; + clock-names = "core", "iface", "phy", "aux", "ref"; + + assigned-clocks = <&gcc PCIE_ALT_REF_CLK>; + assigned-clock-rates = <100000000>; + + resets = <&gcc PCIE_ACLK_RESET>, + <&gcc PCIE_HCLK_RESET>, + <&gcc PCIE_POR_RESET>, + <&gcc PCIE_PCI_RESET>, + <&gcc PCIE_PHY_RESET>, + <&gcc PCIE_EXT_RESET>; + reset-names = "axi", "ahb", "por", "pci", "phy", "ext"; + + pinctrl-0 = <&pcie0_pins>; + pinctrl-names = "default"; + + status = "disabled"; + perst-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>; + }; + + pcie1: pci@1b700000 { + compatible = "qcom,pcie-ipq8064"; + reg = <0x1b700000 0x1000 + 0x1b702000 0x80 + 0x1b800000 0x100 + 0x31f00000 0x100000>; + reg-names = "dbi", "elbi", "parf", "config"; + device_type = "pci"; + linux,pci-domain = <1>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x81000000 0 0x31e00000 0x31e00000 0 0x00100000 /* downstream I/O */ + 0x82000000 0 0x2e000000 0x2e000000 0 0x03e00000>; /* non-prefetchable memory */ + + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 58 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 59 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 60 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 61 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc PCIE_1_A_CLK>, + <&gcc PCIE_1_H_CLK>, + <&gcc PCIE_1_PHY_CLK>, + <&gcc PCIE_1_AUX_CLK>, + <&gcc PCIE_1_ALT_REF_CLK>; + clock-names = "core", "iface", "phy", "aux", "ref"; + + assigned-clocks = <&gcc PCIE_1_ALT_REF_CLK>; + assigned-clock-rates = <100000000>; + + resets = <&gcc PCIE_1_ACLK_RESET>, + <&gcc PCIE_1_HCLK_RESET>, + <&gcc PCIE_1_POR_RESET>, + <&gcc PCIE_1_PCI_RESET>, + <&gcc PCIE_1_PHY_RESET>, + <&gcc PCIE_1_EXT_RESET>; + reset-names = "axi", "ahb", "por", "pci", "phy", "ext"; + + pinctrl-0 = <&pcie1_pins>; + pinctrl-names = "default"; + + status = "disabled"; + perst-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>; + }; + + pcie2: pci@1b900000 { + compatible = "qcom,pcie-ipq8064"; + reg = <0x1b900000 0x1000 + 0x1b902000 0x80 + 0x1ba00000 0x100 + 0x35f00000 0x100000>; + reg-names = "dbi", "elbi", "parf", "config"; + device_type = "pci"; + linux,pci-domain = <2>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x81000000 0 0x35e00000 0x35e00000 0 0x00100000 /* downstream I/O */ + 0x82000000 0 0x32000000 0x32000000 0 0x03e00000>; /* non-prefetchable memory */ + + interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 72 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 73 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 74 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 75 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc PCIE_2_A_CLK>, + <&gcc PCIE_2_H_CLK>, + <&gcc PCIE_2_PHY_CLK>, + <&gcc PCIE_2_AUX_CLK>, + <&gcc PCIE_2_ALT_REF_CLK>; + clock-names = "core", "iface", "phy", "aux", "ref"; + + assigned-clocks = <&gcc PCIE_2_ALT_REF_CLK>; + assigned-clock-rates = <100000000>; + + resets = <&gcc PCIE_2_ACLK_RESET>, + <&gcc PCIE_2_HCLK_RESET>, + <&gcc PCIE_2_POR_RESET>, + <&gcc PCIE_2_PCI_RESET>, + <&gcc PCIE_2_PHY_RESET>, + <&gcc PCIE_2_EXT_RESET>; + reset-names = "axi", "ahb", "por", "pci", "phy", "ext"; + + pinctrl-0 = <&pcie2_pins>; + pinctrl-names = "default"; + + status = "disabled"; + perst-gpio = <&qcom_pinmux 63 GPIO_ACTIVE_LOW>; + }; + + vsdcc_fixed: vsdcc-regulator { + compatible = "regulator-fixed"; + regulator-name = "SDCC Power"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + sdcc1bam:dma@12402000 { + compatible = "qcom,bam-v1.3.0"; + reg = <0x12402000 0x8000>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc SDC1_H_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + }; + + sdcc3bam:dma@12182000 { + compatible = "qcom,bam-v1.3.0"; + reg = <0x12182000 0x8000>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc SDC3_H_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + }; + + amba { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + sdcc@12400000 { + status = "disabled"; + compatible = "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x00051180>; + reg = <0x12400000 0x2000>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "cmd_irq"; + clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <8>; + max-frequency = <96000000>; + non-removable; + cap-sd-highspeed; + cap-mmc-highspeed; + mmc-ddr-1_8v; + vmmc-supply = <&vsdcc_fixed>; + dmas = <&sdcc1bam 2>, <&sdcc1bam 1>; + dma-names = "tx", "rx"; + }; + + sdcc@12180000 { + compatible = "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x00051180>; + status = "disabled"; + reg = <0x12180000 0x2000>; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "cmd_irq"; + clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <8>; + cap-sd-highspeed; + cap-mmc-highspeed; + max-frequency = <192000000>; + #mmc-ddr-1_8v; + sd-uhs-sdr104; + sd-uhs-ddr50; + vqmmc-supply = <&vsdcc_fixed>; + dmas = <&sdcc3bam 2>, <&sdcc3bam 1>; + dma-names = "tx", "rx"; + }; + }; }; }; diff --git a/dts/src/arm/qcom-msm8974-lge-nexus5-hammerhead.dts b/dts/src/arm/qcom-msm8974-lge-nexus5-hammerhead.dts index c2dc9d0948..ed8f064d08 100644 --- a/dts/src/arm/qcom-msm8974-lge-nexus5-hammerhead.dts +++ b/dts/src/arm/qcom-msm8974-lge-nexus5-hammerhead.dts @@ -241,6 +241,33 @@ bias-pull-up; }; }; + + i2c3_pins: i2c3 { + mux { + pins = "gpio10", "gpio11"; + function = "blsp_i2c3"; + drive-strength = <2>; + bias-disable; + }; + }; + + i2c12_pins: i2c12 { + mux { + pins = "gpio87", "gpio88"; + function = "blsp_i2c12"; + drive-strength = <2>; + bias-disable; + }; + }; + + mpu6515_pin: mpu6515 { + irq { + pins = "gpio73"; + function = "gpio"; + bias-disable; + input-enable; + }; + }; }; sdhci@f9824900 { @@ -277,6 +304,62 @@ linux,code = <KEY_VOLUMEDOWN>; }; }; + + i2c@f9968000 { + status = "ok"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c12_pins>; + clock-frequency = <100000>; + qcom,src-freq = <50000000>; + + mpu6515@68 { + compatible = "invensense,mpu6515"; + reg = <0x68>; + interrupts-extended = <&msmgpio 73 IRQ_TYPE_EDGE_FALLING>; + vddio-supply = <&pm8941_lvs1>; + + pinctrl-names = "default"; + pinctrl-0 = <&mpu6515_pin>; + + i2c-gate { + #address-cells = <1>; + #size-cells = <0>; + ak8963@f { + compatible = "asahi-kasei,ak8963"; + reg = <0x0f>; + // Currently only works in polling mode. + // gpios = <&msmgpio 61 0>; + vid-supply = <&pm8941_lvs1>; + vdd-supply = <&pm8941_l17>; + }; + + bmp280@76 { + compatible = "bosch,bmp280"; + reg = <0x76>; + vdda-supply = <&pm8941_lvs1>; + vddd-supply = <&pm8941_l17>; + }; + }; + }; + }; + + i2c@f9925000 { + status = "ok"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins>; + clock-frequency = <100000>; + qcom,src-freq = <50000000>; + + avago_apds993@39 { + compatible = "avago,apds9930"; + reg = <0x39>; + interrupts-extended = <&msmgpio 61 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&pm8941_l17>; + vddio-supply = <&pm8941_lvs1>; + led-max-microamp = <100000>; + amstaos,proximity-diodes = <0>; + }; + }; }; &spmi_bus { diff --git a/dts/src/arm/qcom-msm8974.dtsi b/dts/src/arm/qcom-msm8974.dtsi index d9019a49b2..aba159d5a9 100644 --- a/dts/src/arm/qcom-msm8974.dtsi +++ b/dts/src/arm/qcom-msm8974.dtsi @@ -67,7 +67,7 @@ cpus { #address-cells = <1>; #size-cells = <0>; - interrupts = <1 9 0xf04>; + interrupts = <GIC_PPI 9 0xf04>; CPU0: cpu@0 { compatible = "qcom,krait"; @@ -214,7 +214,7 @@ cpu-pmu { compatible = "qcom,krait-pmu"; - interrupts = <1 7 0xf04>; + interrupts = <GIC_PPI 7 0xf04>; }; clocks { @@ -233,17 +233,17 @@ timer { compatible = "arm,armv7-timer"; - interrupts = <1 2 0xf08>, - <1 3 0xf08>, - <1 4 0xf08>, - <1 1 0xf08>; + interrupts = <GIC_PPI 2 0xf08>, + <GIC_PPI 3 0xf08>, + <GIC_PPI 4 0xf08>, + <GIC_PPI 1 0xf08>; clock-frequency = <19200000>; }; adsp-pil { compatible = "qcom,msm8974-adsp-pil"; - interrupts-extended = <&intc 0 162 IRQ_TYPE_EDGE_RISING>, + interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>, <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, @@ -275,7 +275,7 @@ qcom,smem = <443>, <429>; interrupt-parent = <&intc>; - interrupts = <0 158 IRQ_TYPE_EDGE_RISING>; + interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>; qcom,ipc = <&apcs 8 10>; @@ -300,7 +300,7 @@ qcom,smem = <435>, <428>; interrupt-parent = <&intc>; - interrupts = <0 27 IRQ_TYPE_EDGE_RISING>; + interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>; qcom,ipc = <&apcs 8 14>; @@ -325,7 +325,7 @@ qcom,smem = <451>, <431>; interrupt-parent = <&intc>; - interrupts = <0 143 IRQ_TYPE_EDGE_RISING>; + interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>; qcom,ipc = <&apcs 8 18>; @@ -364,7 +364,7 @@ modem_smsm: modem@1 { reg = <1>; - interrupts = <0 26 IRQ_TYPE_EDGE_RISING>; + interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>; interrupt-controller; #interrupt-cells = <2>; @@ -372,7 +372,7 @@ adsp_smsm: adsp@2 { reg = <2>; - interrupts = <0 157 IRQ_TYPE_EDGE_RISING>; + interrupts = <GIC_SPI 157 IRQ_TYPE_EDGE_RISING>; interrupt-controller; #interrupt-cells = <2>; @@ -380,7 +380,7 @@ wcnss_smsm: wcnss@7 { reg = <7>; - interrupts = <0 144 IRQ_TYPE_EDGE_RISING>; + interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>; interrupt-controller; #interrupt-cells = <2>; @@ -445,50 +445,50 @@ frame@f9021000 { frame-number = <0>; - interrupts = <0 8 0x4>, - <0 7 0x4>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; reg = <0xf9021000 0x1000>, <0xf9022000 0x1000>; }; frame@f9023000 { frame-number = <1>; - interrupts = <0 9 0x4>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; reg = <0xf9023000 0x1000>; status = "disabled"; }; frame@f9024000 { frame-number = <2>; - interrupts = <0 10 0x4>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; reg = <0xf9024000 0x1000>; status = "disabled"; }; frame@f9025000 { frame-number = <3>; - interrupts = <0 11 0x4>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; reg = <0xf9025000 0x1000>; status = "disabled"; }; frame@f9026000 { frame-number = <4>; - interrupts = <0 12 0x4>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; reg = <0xf9026000 0x1000>; status = "disabled"; }; frame@f9027000 { frame-number = <5>; - interrupts = <0 13 0x4>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; reg = <0xf9027000 0x1000>; status = "disabled"; }; frame@f9028000 { frame-number = <6>; - interrupts = <0 14 0x4>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; reg = <0xf9028000 0x1000>; status = "disabled"; }; @@ -586,7 +586,7 @@ blsp1_uart1: serial@f991d000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0xf991d000 0x1000>; - interrupts = <0 107 0x0>; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; status = "disabled"; @@ -595,7 +595,7 @@ blsp1_uart2: serial@f991e000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0xf991e000 0x1000>; - interrupts = <0 108 0x0>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; status = "disabled"; @@ -605,7 +605,8 @@ compatible = "qcom,sdhci-msm-v4"; reg = <0xf9824900 0x11c>, <0xf9824000 0x800>; reg-names = "hc_mem", "core_mem"; - interrupts = <0 123 0>, <0 138 0>; + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "hc_irq", "pwr_irq"; clocks = <&gcc GCC_SDCC1_APPS_CLK>, <&gcc GCC_SDCC1_AHB_CLK>, @@ -618,8 +619,8 @@ compatible = "qcom,sdhci-msm-v4"; reg = <0xf9864900 0x11c>, <0xf9864000 0x800>; reg-names = "hc_mem", "core_mem"; - interrupts = <GIC_SPI 127 IRQ_TYPE_NONE>, - <GIC_SPI 224 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "hc_irq", "pwr_irq"; clocks = <&gcc GCC_SDCC3_APPS_CLK>, <&gcc GCC_SDCC3_AHB_CLK>, @@ -632,7 +633,8 @@ compatible = "qcom,sdhci-msm-v4"; reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>; reg-names = "hc_mem", "core_mem"; - interrupts = <0 125 0>, <0 221 0>; + interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "hc_irq", "pwr_irq"; clocks = <&gcc GCC_SDCC2_APPS_CLK>, <&gcc GCC_SDCC2_AHB_CLK>, @@ -699,25 +701,36 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; - interrupts = <0 208 0>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; }; i2c@f9924000 { status = "disabled"; compatible = "qcom,i2c-qup-v2.1.1"; reg = <0xf9924000 0x1000>; - interrupts = <0 96 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; #address-cells = <1>; #size-cells = <0>; }; + blsp_i2c3: i2c@f9925000 { + status = "disabled"; + compatible = "qcom,i2c-qup-v2.1.1"; + reg = <0xf9925000 0x1000>; + interrupts = <0 97 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + #address-cells = <1>; + #size-cells = <0>; + }; + blsp_i2c8: i2c@f9964000 { status = "disabled"; compatible = "qcom,i2c-qup-v2.1.1"; reg = <0xf9964000 0x1000>; - interrupts = <0 102 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; clock-names = "core", "iface"; #address-cells = <1>; @@ -728,7 +741,7 @@ status = "disabled"; compatible = "qcom,i2c-qup-v2.1.1"; reg = <0xf9967000 0x1000>; - interrupts = <0 105 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; clock-names = "core", "iface"; #address-cells = <1>; @@ -737,6 +750,17 @@ dma-names = "tx", "rx"; }; + blsp_i2c12: i2c@f9968000 { + status = "disabled"; + compatible = "qcom,i2c-qup-v2.1.1"; + reg = <0xf9968000 0x1000>; + interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP2_QUP6_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + #address-cells = <1>; + #size-cells = <0>; + }; + spmi_bus: spmi@fc4cf000 { compatible = "qcom,spmi-pmic-arb"; reg-names = "core", "intr", "cnfg"; @@ -744,7 +768,7 @@ <0xfc4cb000 0x1000>, <0xfc4ca000 0x1000>; interrupt-names = "periph_irq"; - interrupts = <0 190 0>; + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; qcom,ee = <0>; qcom,channel = <0>; #address-cells = <2>; @@ -770,10 +794,11 @@ clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; - port { - etr_in: endpoint { - slave-mode; - remote-endpoint = <&replicator_out0>; + in-ports { + port { + etr_in: endpoint { + remote-endpoint = <&replicator_out0>; + }; }; }; }; @@ -785,10 +810,11 @@ clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; - port { - tpiu_in: endpoint { - slave-mode; - remote-endpoint = <&replicator_out1>; + in-ports { + port { + tpiu_in: endpoint { + remote-endpoint = <&replicator_out1>; + }; }; }; }; @@ -800,7 +826,7 @@ clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; - ports { + out-ports { #address-cells = <1>; #size-cells = <0>; @@ -816,10 +842,11 @@ remote-endpoint = <&tpiu_in>; }; }; - port@2 { - reg = <0>; + }; + + in-ports { + port { replicator_in: endpoint { - slave-mode; remote-endpoint = <&etf_out>; }; }; @@ -833,20 +860,17 @@ clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; + out-ports { + port { etf_out: endpoint { remote-endpoint = <&replicator_in>; }; }; - port@1 { - reg = <0>; + }; + + in-ports { + port { etf_in: endpoint { - slave-mode; remote-endpoint = <&merger_out>; }; }; @@ -860,7 +884,7 @@ clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; - ports { + in-ports { #address-cells = <1>; #size-cells = <0>; @@ -873,12 +897,13 @@ port@1 { reg = <1>; merger_in1: endpoint { - slave-mode; remote-endpoint = <&funnel1_out>; }; }; - port@8 { - reg = <0>; + }; + + out-ports { + port { merger_out: endpoint { remote-endpoint = <&etf_in>; }; @@ -893,7 +918,7 @@ clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; - ports { + in-ports { #address-cells = <1>; #size-cells = <0>; @@ -910,12 +935,13 @@ port@5 { reg = <5>; funnel1_in5: endpoint { - slave-mode; remote-endpoint = <&kpss_out>; }; }; - port@8 { - reg = <0>; + }; + + out-ports { + port { funnel1_out: endpoint { remote-endpoint = <&merger_in1>; }; @@ -930,40 +956,38 @@ clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; - ports { + in-ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; kpss_in0: endpoint { - slave-mode; remote-endpoint = <&etm0_out>; }; }; port@1 { reg = <1>; kpss_in1: endpoint { - slave-mode; remote-endpoint = <&etm1_out>; }; }; port@2 { reg = <2>; kpss_in2: endpoint { - slave-mode; remote-endpoint = <&etm2_out>; }; }; port@3 { reg = <3>; kpss_in3: endpoint { - slave-mode; remote-endpoint = <&etm3_out>; }; }; - port@8 { - reg = <0>; + }; + + out-ports { + port { kpss_out: endpoint { remote-endpoint = <&funnel1_in5>; }; @@ -980,9 +1004,11 @@ cpu = <&CPU0>; - port { - etm0_out: endpoint { - remote-endpoint = <&kpss_in0>; + out-ports { + port { + etm0_out: endpoint { + remote-endpoint = <&kpss_in0>; + }; }; }; }; @@ -996,9 +1022,11 @@ cpu = <&CPU1>; - port { - etm1_out: endpoint { - remote-endpoint = <&kpss_in1>; + out-ports { + port { + etm1_out: endpoint { + remote-endpoint = <&kpss_in1>; + }; }; }; }; @@ -1012,9 +1040,11 @@ cpu = <&CPU2>; - port { - etm2_out: endpoint { - remote-endpoint = <&kpss_in2>; + out-ports { + port { + etm2_out: endpoint { + remote-endpoint = <&kpss_in2>; + }; }; }; }; @@ -1028,9 +1058,11 @@ cpu = <&CPU3>; - port { - etm3_out: endpoint { - remote-endpoint = <&kpss_in3>; + out-ports { + port { + etm3_out: endpoint { + remote-endpoint = <&kpss_in3>; + }; }; }; }; @@ -1040,21 +1072,21 @@ compatible = "qcom,smd"; adsp { - interrupts = <0 156 IRQ_TYPE_EDGE_RISING>; + interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>; qcom,ipc = <&apcs 8 8>; qcom,smd-edge = <1>; }; modem { - interrupts = <0 25 IRQ_TYPE_EDGE_RISING>; + interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>; qcom,ipc = <&apcs 8 12>; qcom,smd-edge = <0>; }; rpm { - interrupts = <0 168 1>; + interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; qcom,ipc = <&apcs 8 0>; qcom,smd-edge = <15>; diff --git a/dts/src/arm/r8a7743-iwg20d-q7-dbcm-ca.dts b/dts/src/arm/r8a7743-iwg20d-q7-dbcm-ca.dts index 327545119e..0d006aea99 100644 --- a/dts/src/arm/r8a7743-iwg20d-q7-dbcm-ca.dts +++ b/dts/src/arm/r8a7743-iwg20d-q7-dbcm-ca.dts @@ -14,3 +14,7 @@ model = "iW-RainboW-G20D-Q7 RZ/G1M based plus camera daughter board"; compatible = "iwave,g20d", "iwave,g20m", "renesas,r8a7743"; }; + +&pciec { + status = "okay"; +}; diff --git a/dts/src/arm/r8a7743-iwg20d-q7.dts b/dts/src/arm/r8a7743-iwg20d-q7.dts index b683db4da8..498e223a5f 100644 --- a/dts/src/arm/r8a7743-iwg20d-q7.dts +++ b/dts/src/arm/r8a7743-iwg20d-q7.dts @@ -13,3 +13,7 @@ model = "iWave Systems RainboW-G20D-Qseven board based on RZ/G1M"; compatible = "iwave,g20d", "iwave,g20m", "renesas,r8a7743"; }; + +&pciec { + status = "okay"; +}; diff --git a/dts/src/arm/r8a77470-iwg23s-sbc.dts b/dts/src/arm/r8a77470-iwg23s-sbc.dts index e3585daafd..22da819f18 100644 --- a/dts/src/arm/r8a77470-iwg23s-sbc.dts +++ b/dts/src/arm/r8a77470-iwg23s-sbc.dts @@ -35,6 +35,8 @@ phy3: ethernet-phy@3 { reg = <3>; + interrupt-parent = <&gpio5>; + interrupts = <16 IRQ_TYPE_LEVEL_LOW>; micrel,led-mode = <1>; }; }; @@ -43,6 +45,16 @@ clock-frequency = <20000000>; }; +&pfc { + scif1_pins: scif1 { + groups = "scif1_data_b"; + function = "scif1"; + }; +}; + &scif1 { + pinctrl-0 = <&scif1_pins>; + pinctrl-names = "default"; + status = "okay"; }; diff --git a/dts/src/arm/r8a77470.dtsi b/dts/src/arm/r8a77470.dtsi index 87d32d3e23..9ec78d3d0c 100644 --- a/dts/src/arm/r8a77470.dtsi +++ b/dts/src/arm/r8a77470.dtsi @@ -8,6 +8,7 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/r8a77470-cpg-mssr.h> +#include <dt-bindings/power/r8a77470-sysc.h> / { compatible = "renesas,r8a77470"; #address-cells = <2>; @@ -16,6 +17,7 @@ cpus { #address-cells = <1>; #size-cells = <0>; + enable-method = "renesas,apmu"; cpu0: cpu@0 { device_type = "cpu"; @@ -23,16 +25,25 @@ reg = <0>; clock-frequency = <1000000000>; clocks = <&cpg CPG_CORE R8A77470_CLK_Z2>; - power-domains = <&sysc 5>; + power-domains = <&sysc R8A77470_PD_CA7_CPU0>; next-level-cache = <&L2_CA7>; }; + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <1>; + clock-frequency = <1000000000>; + clocks = <&cpg CPG_CORE R8A77470_CLK_Z2>; + power-domains = <&sysc R8A77470_PD_CA7_CPU1>; + next-level-cache = <&L2_CA7>; + }; L2_CA7: cache-controller-0 { compatible = "cache"; cache-unified; cache-level = <2>; - power-domains = <&sysc 21>; + power-domains = <&sysc R8A77470_PD_CA7_SCU>; }; }; @@ -60,6 +71,102 @@ #size-cells = <2>; ranges; + gpio0: gpio@e6050000 { + compatible = "renesas,gpio-r8a77470", + "renesas,rcar-gen2-gpio"; + reg = <0 0xe6050000 0 0x50>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 0 23>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 912>; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; + resets = <&cpg 912>; + }; + + gpio1: gpio@e6051000 { + compatible = "renesas,gpio-r8a77470", + "renesas,rcar-gen2-gpio"; + reg = <0 0xe6051000 0 0x50>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 32 23>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 911>; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; + resets = <&cpg 911>; + }; + + gpio2: gpio@e6052000 { + compatible = "renesas,gpio-r8a77470", + "renesas,rcar-gen2-gpio"; + reg = <0 0xe6052000 0 0x50>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 64 32>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 910>; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; + resets = <&cpg 910>; + }; + + gpio3: gpio@e6053000 { + compatible = "renesas,gpio-r8a77470", + "renesas,rcar-gen2-gpio"; + reg = <0 0xe6053000 0 0x50>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 96 30>; + gpio-reserved-ranges = <17 10>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 909>; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; + resets = <&cpg 909>; + }; + + gpio4: gpio@e6054000 { + compatible = "renesas,gpio-r8a77470", + "renesas,rcar-gen2-gpio"; + reg = <0 0xe6054000 0 0x50>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 128 26>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 908>; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; + resets = <&cpg 908>; + }; + + gpio5: gpio@e6055000 { + compatible = "renesas,gpio-r8a77470", + "renesas,rcar-gen2-gpio"; + reg = <0 0xe6055000 0 0x50>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 160 32>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 907>; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; + resets = <&cpg 907>; + }; + + pfc: pin-controller@e6060000 { + compatible = "renesas,pfc-r8a77470"; + reg = <0 0xe6060000 0 0x118>; + }; + cpg: clock-controller@e6150000 { compatible = "renesas,r8a77470-cpg-mssr"; reg = <0 0xe6150000 0 0x1000>; @@ -70,6 +177,12 @@ #reset-cells = <1>; }; + apmu@e6151000 { + compatible = "renesas,r8a77470-apmu", "renesas,apmu"; + reg = <0 0xe6151000 0 0x188>; + cpus = <&cpu0 &cpu1>; + }; + rst: reset-controller@e6160000 { compatible = "renesas,r8a77470-rst"; reg = <0 0xe6160000 0 0x100>; @@ -97,7 +210,7 @@ <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 407>; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; resets = <&cpg 407>; }; @@ -124,6 +237,20 @@ reg = <0 0xe6300000 0 0x20000>; }; + i2c4: i2c@e6520000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a77470", + "renesas,rcar-gen2-i2c"; + reg = <0 0xe6520000 0 0x40>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 927>; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; + resets = <&cpg 927>; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + dmac0: dma-controller@e6700000 { compatible = "renesas,dmac-r8a77470", "renesas,rcar-dmac"; @@ -151,7 +278,7 @@ "ch12", "ch13", "ch14"; clocks = <&cpg CPG_MOD 219>; clock-names = "fck"; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; resets = <&cpg 219>; #dma-cells = <1>; dma-channels = <15>; @@ -184,7 +311,7 @@ "ch12", "ch13", "ch14"; clocks = <&cpg CPG_MOD 218>; clock-names = "fck"; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; resets = <&cpg 218>; #dma-cells = <1>; dma-channels = <15>; @@ -196,7 +323,7 @@ reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>; interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 812>; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; resets = <&cpg 812>; #address-cells = <1>; #size-cells = <0>; @@ -214,7 +341,7 @@ dmas = <&dmac0 0x29>, <&dmac0 0x2a>, <&dmac1 0x29>, <&dmac1 0x2a>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; resets = <&cpg 721>; status = "disabled"; }; @@ -230,7 +357,7 @@ dmas = <&dmac0 0x2d>, <&dmac0 0x2e>, <&dmac1 0x2d>, <&dmac1 0x2e>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; resets = <&cpg 720>; status = "disabled"; }; @@ -246,7 +373,7 @@ dmas = <&dmac0 0x2b>, <&dmac0 0x2c>, <&dmac1 0x2b>, <&dmac1 0x2c>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; resets = <&cpg 719>; status = "disabled"; }; @@ -262,7 +389,7 @@ dmas = <&dmac0 0x2f>, <&dmac0 0x30>, <&dmac1 0x2f>, <&dmac1 0x30>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; resets = <&cpg 718>; status = "disabled"; }; @@ -278,7 +405,7 @@ dmas = <&dmac0 0xfb>, <&dmac0 0xfc>, <&dmac1 0xfb>, <&dmac1 0xfc>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; resets = <&cpg 715>; status = "disabled"; }; @@ -294,11 +421,26 @@ dmas = <&dmac0 0xfd>, <&dmac0 0xfe>, <&dmac1 0xfd>, <&dmac1 0xfe>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; resets = <&cpg 714>; status = "disabled"; }; + sdhi2: sd@ee160000 { + compatible = "renesas,sdhi-r8a77470", + "renesas,rcar-gen2-sdhi"; + reg = <0 0xee160000 0 0x328>; + interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 312>; + dmas = <&dmac0 0xd3>, <&dmac0 0xd4>, + <&dmac1 0xd3>, <&dmac1 0xd4>; + dma-names = "tx", "rx", "tx", "rx"; + max-frequency = <97500000>; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; + resets = <&cpg 312>; + status = "disabled"; + }; + gic: interrupt-controller@f1001000 { compatible = "arm,gic-400"; #interrupt-cells = <3>; @@ -309,7 +451,7 @@ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; clocks = <&cpg CPG_MOD 408>; clock-names = "clk"; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; resets = <&cpg 408>; }; diff --git a/dts/src/arm/r8a7778-bockw.dts b/dts/src/arm/r8a7778-bockw.dts index de808d2ea8..cecb22924e 100644 --- a/dts/src/arm/r8a7778-bockw.dts +++ b/dts/src/arm/r8a7778-bockw.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Reference Device Tree Source for the Bock-W board + * Reference Device Tree Source for the R-Car M1A (R8A77781) Bock-W board * * Copyright (C) 2013 Renesas Solutions Corp. * Copyright (C) 2013 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> diff --git a/dts/src/arm/r8a7778.dtsi b/dts/src/arm/r8a7778.dtsi index 1bce16cc6b..05db0ccad7 100644 --- a/dts/src/arm/r8a7778.dtsi +++ b/dts/src/arm/r8a7778.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source for Renesas r8a7778 + * Device Tree Source for the R-Car M1A (R8A77781) SoC * * Copyright (C) 2013 Renesas Solutions Corp. * Copyright (C) 2013 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> diff --git a/dts/src/arm/r8a7779-marzen.dts b/dts/src/arm/r8a7779-marzen.dts index a4d0038363..abc14e7a4c 100644 --- a/dts/src/arm/r8a7779-marzen.dts +++ b/dts/src/arm/r8a7779-marzen.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source for the Marzen board + * Device Tree Source for the R-Car H1 (R8A77790) Marzen board * * Copyright (C) 2013 Renesas Solutions Corp. * Copyright (C) 2013 Simon Horman diff --git a/dts/src/arm/r8a7779.dtsi b/dts/src/arm/r8a7779.dtsi index 6b997bc016..3bc133d948 100644 --- a/dts/src/arm/r8a7779.dtsi +++ b/dts/src/arm/r8a7779.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source for Renesas r8a7779 + * Device Tree Source for the R-Car H1 (R8A77790) SoC * * Copyright (C) 2013 Renesas Solutions Corp. * Copyright (C) 2013 Simon Horman @@ -344,7 +344,7 @@ sata: sata@fc600000 { compatible = "renesas,sata-r8a7779", "renesas,rcar-sata"; - reg = <0xfc600000 0x2000>; + reg = <0xfc600000 0x200000>; interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7779_CLK_SATA>; power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; diff --git a/dts/src/arm/r8a7790-stout.dts b/dts/src/arm/r8a7790-stout.dts index a13a92c266..629da4cee1 100644 --- a/dts/src/arm/r8a7790-stout.dts +++ b/dts/src/arm/r8a7790-stout.dts @@ -318,6 +318,10 @@ interrupts = <2 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; + onkey { + compatible = "dlg,da9063-onkey"; + }; + rtc { compatible = "dlg,da9063-rtc"; }; diff --git a/dts/src/arm/r8a7790.dtsi b/dts/src/arm/r8a7790.dtsi index 0925bdca43..5a2747758f 100644 --- a/dts/src/arm/r8a7790.dtsi +++ b/dts/src/arm/r8a7790.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source for the r8a7790 SoC + * Device Tree Source for the R-Car H2 (R8A77900) SoC * * Copyright (C) 2015 Renesas Electronics Corporation * Copyright (C) 2013-2014 Renesas Solutions Corp. @@ -1559,7 +1559,7 @@ sata0: sata@ee300000 { compatible = "renesas,sata-r8a7790", "renesas,rcar-gen2-sata"; - reg = <0 0xee300000 0 0x2000>; + reg = <0 0xee300000 0 0x200000>; interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 815>; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; @@ -1570,7 +1570,7 @@ sata1: sata@ee500000 { compatible = "renesas,sata-r8a7790", "renesas,rcar-gen2-sata"; - reg = <0 0xee500000 0 0x2000>; + reg = <0 0xee500000 0 0x200000>; interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 814>; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; diff --git a/dts/src/arm/r8a7791.dtsi b/dts/src/arm/r8a7791.dtsi index 991ac6feed..6f87550245 100644 --- a/dts/src/arm/r8a7791.dtsi +++ b/dts/src/arm/r8a7791.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source for the r8a7791 SoC + * Device Tree Source for the R-Car M2-W (R8A77910) SoC * * Copyright (C) 2013-2015 Renesas Electronics Corporation * Copyright (C) 2013-2014 Renesas Solutions Corp. @@ -1543,7 +1543,7 @@ sata0: sata@ee300000 { compatible = "renesas,sata-r8a7791", "renesas,rcar-gen2-sata"; - reg = <0 0xee300000 0 0x2000>; + reg = <0 0xee300000 0 0x200000>; interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 815>; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; @@ -1554,7 +1554,7 @@ sata1: sata@ee500000 { compatible = "renesas,sata-r8a7791", "renesas,rcar-gen2-sata"; - reg = <0 0xee500000 0 0x2000>; + reg = <0 0xee500000 0 0x200000>; interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 814>; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; diff --git a/dts/src/arm/r8a7792.dtsi b/dts/src/arm/r8a7792.dtsi index 63a978ec81..8e9eb4b704 100644 --- a/dts/src/arm/r8a7792.dtsi +++ b/dts/src/arm/r8a7792.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source for the r8a7792 SoC + * Device Tree Source for the R-Car V2H (R8A77920) SoC * * Copyright (C) 2016 Cogent Embedded Inc. */ @@ -829,7 +829,6 @@ du: display@feb00000 { compatible = "renesas,du-r8a7792"; reg = <0 0xfeb00000 0 0x40000>; - reg-names = "du"; interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 724>, diff --git a/dts/src/arm/r8a7793-gose.dts b/dts/src/arm/r8a7793-gose.dts index 6b2f3a4fd1..f51601af89 100644 --- a/dts/src/arm/r8a7793-gose.dts +++ b/dts/src/arm/r8a7793-gose.dts @@ -596,6 +596,10 @@ status = "okay"; }; +&cpu0 { + cpu0-supply = <&vdd_dvfs>; +}; + &rwdt { timeout-sec = <60>; status = "okay"; @@ -725,6 +729,18 @@ compatible = "dlg,da9063-watchdog"; }; }; + + vdd_dvfs: regulator@68 { + compatible = "dlg,da9210"; + reg = <0x68>; + interrupt-parent = <&irqc0>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-boot-on; + regulator-always-on; + }; }; &i2c4 { diff --git a/dts/src/arm/r8a7793.dtsi b/dts/src/arm/r8a7793.dtsi index 620a570307..bf05110fac 100644 --- a/dts/src/arm/r8a7793.dtsi +++ b/dts/src/arm/r8a7793.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source for the r8a7793 SoC + * Device Tree Source for the R-Car M2-N (R8A77930) SoC * * Copyright (C) 2014-2015 Renesas Electronics Corporation */ diff --git a/dts/src/arm/r8a7794-silk.dts b/dts/src/arm/r8a7794-silk.dts index daec965889..60e91ebfa6 100644 --- a/dts/src/arm/r8a7794-silk.dts +++ b/dts/src/arm/r8a7794-silk.dts @@ -405,6 +405,31 @@ clock-frequency = <400000>; }; +&i2c7 { + status = "okay"; + clock-frequency = <100000>; + + pmic@58 { + compatible = "dlg,da9063"; + reg = <0x58>; + interrupt-parent = <&gpio3>; + interrupts = <31 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + + onkey { + compatible = "dlg,da9063-onkey"; + }; + + rtc { + compatible = "dlg,da9063-rtc"; + }; + + wdt { + compatible = "dlg,da9063-watchdog"; + }; + }; +}; + &mmcif0 { pinctrl-0 = <&mmcif0_pins>; pinctrl-names = "default"; diff --git a/dts/src/arm/r8a7794.dtsi b/dts/src/arm/r8a7794.dtsi index ea2ca4bdaf..8d797d3481 100644 --- a/dts/src/arm/r8a7794.dtsi +++ b/dts/src/arm/r8a7794.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source for the r8a7794 SoC + * Device Tree Source for the R-Car E2 (R8A77940) SoC * * Copyright (C) 2014 Renesas Electronics Corporation * Copyright (C) 2014 Ulrich Hecht @@ -1349,7 +1349,6 @@ du: display@feb00000 { compatible = "renesas,du-r8a7794"; reg = <0 0xfeb00000 0 0x40000>; - reg-names = "du"; interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>; diff --git a/dts/src/arm/r9a06g032.dtsi b/dts/src/arm/r9a06g032.dtsi index afe29c95a0..eaf94976ed 100644 --- a/dts/src/arm/r9a06g032.dtsi +++ b/dts/src/arm/r9a06g032.dtsi @@ -7,6 +7,7 @@ */ #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/r9a06g032-sysctrl.h> / { compatible = "renesas,r9a06g032"; @@ -21,14 +22,14 @@ device_type = "cpu"; compatible = "arm,cortex-a7"; reg = <0>; - clocks = <&sysctrl 84>; + clocks = <&sysctrl R9A06G032_CLK_A7MP>; }; cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a7"; reg = <1>; - clocks = <&sysctrl 84>; + clocks = <&sysctrl R9A06G032_CLK_A7MP>; enable-method = "renesas,r9a06g032-smp"; cpu-release-addr = <0 0x4000c204>; }; @@ -77,13 +78,90 @@ }; uart0: serial@40060000 { - compatible = "snps,dw-apb-uart"; + compatible = "renesas,r9a06g032-uart", "renesas,rzn1-uart", "snps,dw-apb-uart"; reg = <0x40060000 0x400>; interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&sysctrl 146>; - clock-names = "baudclk"; + clocks = <&sysctrl R9A06G032_CLK_UART0>, <&sysctrl R9A06G032_HCLK_UART0>; + clock-names = "baudclk", "apb_pclk"; + status = "disabled"; + }; + + uart1: serial@40061000 { + compatible = "renesas,r9a06g032-uart", "renesas,rzn1-uart", "snps,dw-apb-uart"; + reg = <0x40061000 0x400>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&sysctrl R9A06G032_CLK_UART1>, <&sysctrl R9A06G032_HCLK_UART1>; + clock-names = "baudclk", "apb_pclk"; + status = "disabled"; + }; + + uart2: serial@40062000 { + compatible = "renesas,r9a06g032-uart", "renesas,rzn1-uart", "snps,dw-apb-uart"; + reg = <0x40062000 0x400>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&sysctrl R9A06G032_CLK_UART2>, <&sysctrl R9A06G032_HCLK_UART2>; + clock-names = "baudclk", "apb_pclk"; + status = "disabled"; + }; + + uart3: serial@50000000 { + compatible = "renesas,r9a06g032-uart", "renesas,rzn1-uart"; + reg = <0x50000000 0x400>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&sysctrl R9A06G032_CLK_UART3>, <&sysctrl R9A06G032_HCLK_UART3>; + clock-names = "baudclk", "apb_pclk"; + status = "disabled"; + }; + + uart4: serial@50001000 { + compatible = "renesas,r9a06g032-uart", "renesas,rzn1-uart"; + reg = <0x50001000 0x400>; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&sysctrl R9A06G032_CLK_UART4>, <&sysctrl R9A06G032_HCLK_UART4>; + clock-names = "baudclk", "apb_pclk"; + status = "disabled"; + }; + + uart5: serial@50002000 { + compatible = "renesas,r9a06g032-uart", "renesas,rzn1-uart"; + reg = <0x50002000 0x400>; + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&sysctrl R9A06G032_CLK_UART5>, <&sysctrl R9A06G032_HCLK_UART5>; + clock-names = "baudclk", "apb_pclk"; + status = "disabled"; + }; + + uart6: serial@50003000 { + compatible = "renesas,r9a06g032-uart", "renesas,rzn1-uart"; + reg = <0x50003000 0x400>; + interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&sysctrl R9A06G032_CLK_UART6>, <&sysctrl R9A06G032_HCLK_UART6>; + clock-names = "baudclk", "apb_pclk"; + status = "disabled"; + }; + + uart7: serial@50004000 { + compatible = "renesas,r9a06g032-uart", "renesas,rzn1-uart"; + reg = <0x50004000 0x400>; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&sysctrl R9A06G032_CLK_UART7>, <&sysctrl R9A06G032_HCLK_UART7>; + clock-names = "baudclk", "apb_pclk"; status = "disabled"; }; diff --git a/dts/src/arm/rk3036.dtsi b/dts/src/arm/rk3036.dtsi index 67f57200d9..d560fc4051 100644 --- a/dts/src/arm/rk3036.dtsi +++ b/dts/src/arm/rk3036.dtsi @@ -733,7 +733,7 @@ /* no rts / cts for uart2 */ }; - spi { + spi-pins { spi_txd:spi-txd { rockchip,pins = <1 29 RK_FUNC_3 &pcfg_pull_default>; }; diff --git a/dts/src/arm/rk3188-radxarock.dts b/dts/src/arm/rk3188-radxarock.dts index 45fd2b302d..4a2890618f 100644 --- a/dts/src/arm/rk3188-radxarock.dts +++ b/dts/src/arm/rk3188-radxarock.dts @@ -93,6 +93,8 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; gpio = <&gpio3 RK_PA1 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_pwr>; startup-delay-us = <100000>; vin-supply = <&vcc_io>; }; @@ -315,6 +317,12 @@ }; }; + sd0 { + sdmmc_pwr: sdmmc-pwr { + rockchip,pins = <RK_GPIO3 1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + usb { host_vbus_drv: host-vbus-drv { rockchip,pins = <0 3 RK_FUNC_GPIO &pcfg_pull_none>; diff --git a/dts/src/arm/rk3188.dtsi b/dts/src/arm/rk3188.dtsi index aa123f93f1..b6f7909737 100644 --- a/dts/src/arm/rk3188.dtsi +++ b/dts/src/arm/rk3188.dtsi @@ -56,6 +56,11 @@ }; }; + display-subsystem { + compatible = "rockchip,display-subsystem"; + ports = <&vop0_out>, <&vop1_out>; + }; + sram: sram@10080000 { compatible = "mmio-sram"; reg = <0x10080000 0x8000>; @@ -69,6 +74,38 @@ }; }; + vop0: vop@1010c000 { + compatible = "rockchip,rk3188-vop"; + reg = <0x1010c000 0x1000>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru ACLK_LCDC0>, <&cru DCLK_LCDC0>, <&cru HCLK_LCDC0>; + clock-names = "aclk_vop", "dclk_vop", "hclk_vop"; + resets = <&cru SRST_LCDC0_AXI>, <&cru SRST_LCDC0_AHB>, <&cru SRST_LCDC0_DCLK>; + reset-names = "axi", "ahb", "dclk"; + status = "disabled"; + + vop0_out: port { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + vop1: vop@1010e000 { + compatible = "rockchip,rk3188-vop"; + reg = <0x1010e000 0x1000>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru ACLK_LCDC1>, <&cru DCLK_LCDC1>, <&cru HCLK_LCDC1>; + clock-names = "aclk_vop", "dclk_vop", "hclk_vop"; + resets = <&cru SRST_LCDC1_AXI>, <&cru SRST_LCDC1_AHB>, <&cru SRST_LCDC1_DCLK>; + reset-names = "axi", "ahb", "dclk"; + status = "disabled"; + + vop1_out: port { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + timer3: timer@2000e000 { compatible = "rockchip,rk3188-timer", "rockchip,rk3288-timer"; reg = <0x2000e000 0x20>; @@ -309,6 +346,51 @@ }; }; + lcdc1 { + lcdc1_dclk: lcdc1-dclk { + rockchip,pins = <2 RK_PD0 RK_FUNC_1 &pcfg_pull_none>; + }; + + lcdc1_den: lcdc1-den { + rockchip,pins = <2 RK_PD1 RK_FUNC_1 &pcfg_pull_none>; + }; + + lcdc1_hsync: lcdc1-hsync { + rockchip,pins = <2 RK_PD2 RK_FUNC_1 &pcfg_pull_none>; + }; + + lcdc1_vsync: lcdc1-vsync { + rockchip,pins = <2 RK_PD3 RK_FUNC_1 &pcfg_pull_none>; + }; + + lcdc1_rgb24: ldcd1-rgb24 { + rockchip,pins = <2 RK_PA0 RK_FUNC_1 &pcfg_pull_none>, + <2 RK_PA1 RK_FUNC_1 &pcfg_pull_none>, + <2 RK_PA2 RK_FUNC_1 &pcfg_pull_none>, + <2 RK_PA3 RK_FUNC_1 &pcfg_pull_none>, + <2 RK_PA4 RK_FUNC_1 &pcfg_pull_none>, + <2 RK_PA5 RK_FUNC_1 &pcfg_pull_none>, + <2 RK_PA6 RK_FUNC_1 &pcfg_pull_none>, + <2 RK_PA7 RK_FUNC_1 &pcfg_pull_none>, + <2 RK_PB0 RK_FUNC_1 &pcfg_pull_none>, + <2 RK_PB1 RK_FUNC_1 &pcfg_pull_none>, + <2 RK_PB2 RK_FUNC_1 &pcfg_pull_none>, + <2 RK_PB3 RK_FUNC_1 &pcfg_pull_none>, + <2 RK_PB4 RK_FUNC_1 &pcfg_pull_none>, + <2 RK_PB5 RK_FUNC_1 &pcfg_pull_none>, + <2 RK_PB6 RK_FUNC_1 &pcfg_pull_none>, + <2 RK_PB7 RK_FUNC_1 &pcfg_pull_none>, + <2 RK_PC0 RK_FUNC_1 &pcfg_pull_none>, + <2 RK_PC1 RK_FUNC_1 &pcfg_pull_none>, + <2 RK_PC2 RK_FUNC_1 &pcfg_pull_none>, + <2 RK_PC3 RK_FUNC_1 &pcfg_pull_none>, + <2 RK_PC4 RK_FUNC_1 &pcfg_pull_none>, + <2 RK_PC5 RK_FUNC_1 &pcfg_pull_none>, + <2 RK_PC6 RK_FUNC_1 &pcfg_pull_none>, + <2 RK_PC7 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + pwm0 { pwm0_out: pwm0-out { rockchip,pins = <RK_GPIO3 27 RK_FUNC_1 &pcfg_pull_none>; diff --git a/dts/src/arm/rk3288-tinker-s.dts b/dts/src/arm/rk3288-tinker-s.dts new file mode 100644 index 0000000000..37093922b4 --- /dev/null +++ b/dts/src/arm/rk3288-tinker-s.dts @@ -0,0 +1,26 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd. + */ + +/dts-v1/; + +#include "rk3288-tinker.dtsi" + +/ { + model = "Rockchip RK3288 Asus Tinker Board S"; + compatible = "asus,rk3288-tinker-s", "rockchip,rk3288"; +}; + +&emmc { + bus-width = <8>; + cap-mmc-highspeed; + disable-wp; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>; + max-frequency = <150000000>; + mmc-hs200-1_8v; + mmc-ddr-1_8v; + status = "okay"; +}; diff --git a/dts/src/arm/rk3288-tinker.dts b/dts/src/arm/rk3288-tinker.dts index ceade59628..1e43527aa1 100644 --- a/dts/src/arm/rk3288-tinker.dts +++ b/dts/src/arm/rk3288-tinker.dts @@ -5,503 +5,9 @@ /dts-v1/; -#include "rk3288.dtsi" -#include <dt-bindings/input/input.h> +#include "rk3288-tinker.dtsi" / { - model = "Rockchip RK3288 Tinker Board"; + model = "Rockchip RK3288 Asus Tinker Board"; compatible = "asus,rk3288-tinker", "rockchip,rk3288"; - - chosen { - stdout-path = "serial2:115200n8"; - }; - - memory { - reg = <0x0 0x0 0x0 0x80000000>; - device_type = "memory"; - }; - - ext_gmac: external-gmac-clock { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <125000000>; - clock-output-names = "ext_gmac"; - }; - - gpio-keys { - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - autorepeat; - - pinctrl-names = "default"; - pinctrl-0 = <&pwrbtn>; - - button@0 { - gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; - linux,code = <KEY_POWER>; - label = "GPIO Key Power"; - linux,input-type = <1>; - wakeup-source; - debounce-interval = <100>; - }; - }; - - gpio-leds { - compatible = "gpio-leds"; - - act-led { - gpios=<&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>; - linux,default-trigger="mmc0"; - }; - - heartbeat-led { - gpios=<&gpio1 RK_PD1 GPIO_ACTIVE_HIGH>; - linux,default-trigger="heartbeat"; - }; - - pwr-led { - gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-on"; - }; - }; - - sound { - compatible = "simple-audio-card"; - simple-audio-card,format = "i2s"; - simple-audio-card,name = "rockchip,tinker-codec"; - simple-audio-card,mclk-fs = <512>; - - simple-audio-card,codec { - sound-dai = <&hdmi>; - }; - - simple-audio-card,cpu { - sound-dai = <&i2s>; - }; - }; - - vcc_sys: vsys-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc_sys"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - regulator-boot-on; - }; - - vcc_sd: sdmmc-regulator { - compatible = "regulator-fixed"; - gpio = <&gpio7 11 GPIO_ACTIVE_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc_pwr>; - regulator-name = "vcc_sd"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - startup-delay-us = <100000>; - vin-supply = <&vcc_io>; - }; -}; - -&cpu0 { - cpu0-supply = <&vdd_cpu>; -}; - -&gmac { - assigned-clocks = <&cru SCLK_MAC>; - assigned-clock-parents = <&ext_gmac>; - clock_in_out = "input"; - phy-mode = "rgmii"; - phy-supply = <&vcc33_lan>; - pinctrl-names = "default"; - pinctrl-0 = <&rgmii_pins>; - snps,reset-gpio = <&gpio4 7 0>; - snps,reset-active-low; - snps,reset-delays-us = <0 10000 1000000>; - tx_delay = <0x30>; - rx_delay = <0x10>; - status = "ok"; -}; - -&gpu { - mali-supply = <&vdd_gpu>; - status = "okay"; -}; - -&hdmi { - ddc-i2c-bus = <&i2c5>; - status = "okay"; -}; - -&i2c0 { - clock-frequency = <400000>; - status = "okay"; - - rk808: pmic@1b { - compatible = "rockchip,rk808"; - reg = <0x1b>; - interrupt-parent = <&gpio0>; - interrupts = <4 IRQ_TYPE_LEVEL_LOW>; - #clock-cells = <1>; - clock-output-names = "xin32k", "rk808-clkout2"; - dvs-gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>, - <&gpio0 12 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&pmic_int &global_pwroff &dvs_1 &dvs_2>; - rockchip,system-power-controller; - wakeup-source; - - vcc1-supply = <&vcc_sys>; - vcc2-supply = <&vcc_sys>; - vcc3-supply = <&vcc_sys>; - vcc4-supply = <&vcc_sys>; - vcc6-supply = <&vcc_sys>; - vcc7-supply = <&vcc_sys>; - vcc8-supply = <&vcc_io>; - vcc9-supply = <&vcc_io>; - vcc10-supply = <&vcc_io>; - vcc11-supply = <&vcc_sys>; - vcc12-supply = <&vcc_io>; - vddio-supply = <&vcc_io>; - - regulators { - vdd_cpu: DCDC_REG1 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1350000>; - regulator-name = "vdd_arm"; - regulator-ramp-delay = <6000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_gpu: DCDC_REG2 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <1250000>; - regulator-name = "vdd_gpu"; - regulator-ramp-delay = <6000>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1000000>; - }; - }; - - vcc_ddr: DCDC_REG3 { - regulator-always-on; - regulator-boot-on; - regulator-name = "vcc_ddr"; - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - vcc_io: DCDC_REG4 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc_io"; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vcc18_ldo1: LDO_REG1 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "vcc18_ldo1"; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vcc33_mipi: LDO_REG2 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc33_mipi"; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_10: LDO_REG3 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-name = "vdd_10"; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1000000>; - }; - }; - - vcc18_codec: LDO_REG4 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "vcc18_codec"; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vccio_sd: LDO_REG5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vccio_sd"; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vdd10_lcd: LDO_REG6 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-name = "vdd10_lcd"; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1000000>; - }; - }; - - vcc_18: LDO_REG7 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "vcc_18"; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vcc18_lcd: LDO_REG8 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "vcc18_lcd"; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vcc33_sd: SWITCH_REG1 { - regulator-always-on; - regulator-boot-on; - regulator-name = "vcc33_sd"; - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - vcc33_lan: SWITCH_REG2 { - regulator-always-on; - regulator-boot-on; - regulator-name = "vcc33_lan"; - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - }; - }; -}; - -&i2c2 { - status = "okay"; -}; - -&i2c5 { - status = "okay"; -}; - -&i2s { - #sound-dai-cells = <0>; - status = "okay"; -}; - -&io_domains { - status = "okay"; - - sdcard-supply = <&vccio_sd>; -}; - -&pinctrl { - pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma { - drive-strength = <8>; - }; - - pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma { - bias-pull-up; - drive-strength = <8>; - }; - - backlight { - bl_en: bl-en { - rockchip,pins = <7 2 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - buttons { - pwrbtn: pwrbtn { - rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - eth_phy { - eth_phy_pwr: eth-phy-pwr { - rockchip,pins = <0 6 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - pmic { - pmic_int: pmic-int { - rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO \ - &pcfg_pull_up>; - }; - - dvs_1: dvs-1 { - rockchip,pins = <RK_GPIO0 11 RK_FUNC_GPIO \ - &pcfg_pull_down>; - }; - - dvs_2: dvs-2 { - rockchip,pins = <RK_GPIO0 12 RK_FUNC_GPIO \ - &pcfg_pull_down>; - }; - }; - - sdmmc { - sdmmc_bus4: sdmmc-bus4 { - rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up_drv_8ma>, - <6 17 RK_FUNC_1 &pcfg_pull_up_drv_8ma>, - <6 18 RK_FUNC_1 &pcfg_pull_up_drv_8ma>, - <6 19 RK_FUNC_1 &pcfg_pull_up_drv_8ma>; - }; - - sdmmc_clk: sdmmc-clk { - rockchip,pins = <6 20 RK_FUNC_1 \ - &pcfg_pull_none_drv_8ma>; - }; - - sdmmc_cmd: sdmmc-cmd { - rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up_drv_8ma>; - }; - - sdmmc_pwr: sdmmc-pwr { - rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - usb { - host_vbus_drv: host-vbus-drv { - rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - pwr_3g: pwr-3g { - rockchip,pins = <7 8 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; -}; - -&pwm0 { - status = "okay"; -}; - -&saradc { - vref-supply = <&vcc18_ldo1>; - status ="okay"; -}; - -&sdmmc { - bus-width = <4>; - cap-mmc-highspeed; - cap-sd-highspeed; - card-detect-delay = <200>; - disable-wp; /* wp not hooked up */ - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; - status = "okay"; - vmmc-supply = <&vcc33_sd>; - vqmmc-supply = <&vccio_sd>; -}; - -&tsadc { - rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */ - rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */ - status = "okay"; -}; - -&uart0 { - status = "okay"; -}; - -&uart1 { - status = "okay"; -}; - -&uart2 { - status = "okay"; -}; - -&uart3 { - status = "okay"; -}; - -&uart4 { - status = "okay"; -}; - -&usbphy { - status = "okay"; -}; - -&usb_host0_ehci { - status = "okay"; -}; - -&usb_host1 { - status = "okay"; -}; - -&usb_otg { - status= "okay"; -}; - -&vopb { - status = "okay"; -}; - -&vopb_mmu { - status = "okay"; -}; - -&vopl { - status = "okay"; -}; - -&vopl_mmu { - status = "okay"; -}; - -&wdt { - status = "okay"; }; diff --git a/dts/src/arm/rk3288-tinker.dtsi b/dts/src/arm/rk3288-tinker.dtsi new file mode 100644 index 0000000000..aa107ee41b --- /dev/null +++ b/dts/src/arm/rk3288-tinker.dtsi @@ -0,0 +1,502 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd. + */ + +#include "rk3288.dtsi" +#include <dt-bindings/input/input.h> + +/ { + chosen { + stdout-path = "serial2:115200n8"; + }; + + memory { + reg = <0x0 0x0 0x0 0x80000000>; + device_type = "memory"; + }; + + ext_gmac: external-gmac-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; + clock-output-names = "ext_gmac"; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + autorepeat; + + pinctrl-names = "default"; + pinctrl-0 = <&pwrbtn>; + + button@0 { + gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + label = "GPIO Key Power"; + linux,input-type = <1>; + wakeup-source; + debounce-interval = <100>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + act-led { + gpios=<&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>; + linux,default-trigger="mmc0"; + }; + + heartbeat-led { + gpios=<&gpio1 RK_PD1 GPIO_ACTIVE_HIGH>; + linux,default-trigger="heartbeat"; + }; + + pwr-led { + gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,name = "rockchip,tinker-codec"; + simple-audio-card,mclk-fs = <512>; + + simple-audio-card,codec { + sound-dai = <&hdmi>; + }; + + simple-audio-card,cpu { + sound-dai = <&i2s>; + }; + }; + + vcc_sys: vsys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_sys"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + vcc_sd: sdmmc-regulator { + compatible = "regulator-fixed"; + gpio = <&gpio7 11 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_pwr>; + regulator-name = "vcc_sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <100000>; + vin-supply = <&vcc_io>; + }; +}; + +&cpu0 { + cpu0-supply = <&vdd_cpu>; +}; + +&gmac { + assigned-clocks = <&cru SCLK_MAC>; + assigned-clock-parents = <&ext_gmac>; + clock_in_out = "input"; + phy-mode = "rgmii"; + phy-supply = <&vcc33_lan>; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>; + snps,reset-gpio = <&gpio4 7 0>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 1000000>; + tx_delay = <0x30>; + rx_delay = <0x10>; + status = "ok"; +}; + +&gpu { + mali-supply = <&vdd_gpu>; + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c5>; + status = "okay"; +}; + +&i2c0 { + clock-frequency = <400000>; + status = "okay"; + + rk808: pmic@1b { + compatible = "rockchip,rk808"; + reg = <0x1b>; + interrupt-parent = <&gpio0>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + #clock-cells = <1>; + clock-output-names = "xin32k", "rk808-clkout2"; + dvs-gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>, + <&gpio0 12 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int &global_pwroff &dvs_1 &dvs_2>; + rockchip,system-power-controller; + wakeup-source; + + vcc1-supply = <&vcc_sys>; + vcc2-supply = <&vcc_sys>; + vcc3-supply = <&vcc_sys>; + vcc4-supply = <&vcc_sys>; + vcc6-supply = <&vcc_sys>; + vcc7-supply = <&vcc_sys>; + vcc8-supply = <&vcc_io>; + vcc9-supply = <&vcc_io>; + vcc10-supply = <&vcc_io>; + vcc11-supply = <&vcc_sys>; + vcc12-supply = <&vcc_io>; + vddio-supply = <&vcc_io>; + + regulators { + vdd_cpu: DCDC_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-name = "vdd_arm"; + regulator-ramp-delay = <6000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu: DCDC_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1250000>; + regulator-name = "vdd_gpu"; + regulator-ramp-delay = <6000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc_ddr"; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_io: DCDC_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_io"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc18_ldo1: LDO_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc18_ldo1"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc33_mipi: LDO_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc33_mipi"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_10: LDO_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-name = "vdd_10"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vcc18_codec: LDO_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc18_codec"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vccio_sd: LDO_REG5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vccio_sd"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vdd10_lcd: LDO_REG6 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-name = "vdd10_lcd"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vcc_18: LDO_REG7 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc_18"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc18_lcd: LDO_REG8 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc18_lcd"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc33_sd: SWITCH_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc33_sd"; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc33_lan: SWITCH_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc33_lan"; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + }; + }; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c5 { + status = "okay"; +}; + +&i2s { + #sound-dai-cells = <0>; + status = "okay"; +}; + +&io_domains { + status = "okay"; + + sdcard-supply = <&vccio_sd>; +}; + +&pinctrl { + pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma { + drive-strength = <8>; + }; + + pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma { + bias-pull-up; + drive-strength = <8>; + }; + + backlight { + bl_en: bl-en { + rockchip,pins = <7 2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + buttons { + pwrbtn: pwrbtn { + rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + eth_phy { + eth_phy_pwr: eth-phy-pwr { + rockchip,pins = <0 6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + pmic_int: pmic-int { + rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO \ + &pcfg_pull_up>; + }; + + dvs_1: dvs-1 { + rockchip,pins = <RK_GPIO0 11 RK_FUNC_GPIO \ + &pcfg_pull_down>; + }; + + dvs_2: dvs-2 { + rockchip,pins = <RK_GPIO0 12 RK_FUNC_GPIO \ + &pcfg_pull_down>; + }; + }; + + sdmmc { + sdmmc_bus4: sdmmc-bus4 { + rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up_drv_8ma>, + <6 17 RK_FUNC_1 &pcfg_pull_up_drv_8ma>, + <6 18 RK_FUNC_1 &pcfg_pull_up_drv_8ma>, + <6 19 RK_FUNC_1 &pcfg_pull_up_drv_8ma>; + }; + + sdmmc_clk: sdmmc-clk { + rockchip,pins = <6 20 RK_FUNC_1 \ + &pcfg_pull_none_drv_8ma>; + }; + + sdmmc_cmd: sdmmc-cmd { + rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up_drv_8ma>; + }; + + sdmmc_pwr: sdmmc-pwr { + rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb { + host_vbus_drv: host-vbus-drv { + rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + pwr_3g: pwr-3g { + rockchip,pins = <7 8 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pwm0 { + status = "okay"; +}; + +&saradc { + vref-supply = <&vcc18_ldo1>; + status ="okay"; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + card-detect-delay = <200>; + disable-wp; /* wp not hooked up */ + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; + status = "okay"; + vmmc-supply = <&vcc33_sd>; + vqmmc-supply = <&vccio_sd>; +}; + +&tsadc { + rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */ + rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */ + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&uart4 { + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host1 { + status = "okay"; +}; + +&usb_otg { + status= "okay"; +}; + +&vopb { + status = "okay"; +}; + +&vopb_mmu { + status = "okay"; +}; + +&vopl { + status = "okay"; +}; + +&vopl_mmu { + status = "okay"; +}; + +&wdt { + status = "okay"; +}; diff --git a/dts/src/arm/s5pv210.dtsi b/dts/src/arm/s5pv210.dtsi index 67358562a6..75f454a210 100644 --- a/dts/src/arm/s5pv210.dtsi +++ b/dts/src/arm/s5pv210.dtsi @@ -120,7 +120,7 @@ interrupts = <30>; wakeup-interrupt-controller { - compatible = "samsung,exynos4210-wakeup-eint"; + compatible = "samsung,s5pv210-wakeup-eint"; interrupts = <16>; interrupt-parent = <&vic0>; }; diff --git a/dts/src/arm/sama5d2.dtsi b/dts/src/arm/sama5d2.dtsi index 61f68e5c48..843052f14f 100644 --- a/dts/src/arm/sama5d2.dtsi +++ b/dts/src/arm/sama5d2.dtsi @@ -47,6 +47,7 @@ #include <dt-bindings/dma/at91.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/clock/at91.h> +#include <dt-bindings/iio/adc/at91-sama5d2_adc.h> / { model = "Atmel SAMA5D2 family SoC"; @@ -58,6 +59,8 @@ serial1 = &uart3; tcb0 = &tcb0; tcb1 = &tcb1; + i2s0 = &i2s0; + i2s1 = &i2s1; }; cpus { @@ -84,10 +87,11 @@ clocks = <&mck>; clock-names = "apb_pclk"; - port { - etb_in: endpoint { - slave-mode; - remote-endpoint = <&etm_out>; + in-ports { + port { + etb_in: endpoint { + remote-endpoint = <&etm_out>; + }; }; }; }; @@ -99,9 +103,11 @@ clocks = <&mck>; clock-names = "apb_pclk"; - port { - etm_out: endpoint { - remote-endpoint = <&etb_in>; + out-ports { + port { + etm_out: endpoint { + remote-endpoint = <&etb_in>; + }; }; }; }; @@ -323,44 +329,6 @@ }; }; - nand0: nand@80000000 { - compatible = "atmel,sama5d2-nand"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - reg = < /* EBI CS3 */ - 0x80000000 0x08000000 - /* SMC PMECC regs */ - 0xf8014070 0x00000490 - /* SMC PMECC Error Location regs */ - 0xf8014500 0x00000200 - /* ROM Galois tables */ - 0x00040000 0x00018000 - >; - interrupts = <17 IRQ_TYPE_LEVEL_HIGH 6>; - atmel,nand-addr-offset = <21>; - atmel,nand-cmd-offset = <22>; - atmel,nand-has-dma; - atmel,has-pmecc; - atmel,pmecc-lookup-table-offset = <0x0 0x8000>; - status = "disabled"; - - nfc@c0000000 { - compatible = "atmel,sama5d3-nfc"; - #address-cells = <1>; - #size-cells = <1>; - reg = < /* NFC Command Registers */ - 0xc0000000 0x08000000 - /* NFC HSMC regs */ - 0xf8014000 0x00000070 - /* NFC SRAM banks */ - 0x00100000 0x00100000 - >; - clocks = <&hsmc_clk>; - atmel,write-by-sram; - }; - }; - sdmmc0: sdio-host@a0000000 { compatible = "atmel,sama5d2-sdhci"; reg = <0xa0000000 0x300>; @@ -992,6 +960,24 @@ atmel,clk-output-range = <0 100000000>; }; }; + + i2s_clkmux { + compatible = "atmel,sama5d2-clk-i2s-mux"; + #address-cells = <1>; + #size-cells = <0>; + + i2s0muxck: i2s0_muxclk { + clocks = <&i2s0_clk>, <&i2s0_gclk>; + #clock-cells = <0>; + reg = <0>; + }; + + i2s1muxck: i2s1_muxclk { + clocks = <&i2s1_clk>, <&i2s1_gclk>; + #clock-cells = <0>; + reg = <1>; + }; + }; }; qspi0: spi@f0020000 { @@ -1295,6 +1281,24 @@ clocks = <&clk32k>; }; + i2s0: i2s@f8050000 { + compatible = "atmel,sama5d2-i2s"; + reg = <0xf8050000 0x100>; + interrupts = <54 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(31))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(32))>; + dma-names = "tx", "rx"; + clocks = <&i2s0_clk>, <&i2s0_gclk>; + clock-names = "pclk", "gclk"; + assigned-clocks = <&i2s0muxck>; + assigned-clock-parents = <&i2s0_gclk>; + status = "disabled"; + }; + can0: can@f8054000 { compatible = "bosch,m_can"; reg = <0xf8054000 0x4000>, <0x210000 0x4000>; @@ -1437,6 +1441,17 @@ atmel,max-sample-rate-hz = <20000000>; atmel,startup-time-ms = <4>; atmel,trigger-edge-type = <IRQ_TYPE_EDGE_RISING>; + #io-channel-cells = <1>; + status = "disabled"; + }; + + resistive_touch: resistive-touch { + compatible = "resistive-adc-touch"; + io-channels = <&adc AT91_SAMA5D2_ADC_X_CHANNEL>, + <&adc AT91_SAMA5D2_ADC_Y_CHANNEL>, + <&adc AT91_SAMA5D2_ADC_P_CHANNEL>; + io-channel-names = "x", "y", "pressure"; + touchscreen-min-pressure = <50000>; status = "disabled"; }; @@ -1488,6 +1503,24 @@ status = "disabled"; }; + i2s1: i2s@fc04c000 { + compatible = "atmel,sama5d2-i2s"; + reg = <0xfc04c000 0x100>; + interrupts = <55 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(33))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(34))>; + dma-names = "tx", "rx"; + clocks = <&i2s1_clk>, <&i2s1_gclk>; + clock-names = "pclk", "gclk"; + assigned-clocks = <&i2s1muxck>; + assigned-parrents = <&i2s1_gclk>; + status = "disabled"; + }; + can1: can@fc050000 { compatible = "bosch,m_can"; reg = <0xfc050000 0x4000>, <0x210000 0x4000>; diff --git a/dts/src/arm/sama5d4.dtsi b/dts/src/arm/sama5d4.dtsi index 92a35a1942..7371f2a046 100644 --- a/dts/src/arm/sama5d4.dtsi +++ b/dts/src/arm/sama5d4.dtsi @@ -1323,13 +1323,13 @@ }; }; - rstc@fc068600 { + reset_controller: rstc@fc068600 { compatible = "atmel,sama5d3-rstc", "atmel,at91sam9g45-rstc"; reg = <0xfc068600 0x10>; clocks = <&clk32k>; }; - shdwc@fc068610 { + shutdown_controller: shdwc@fc068610 { compatible = "atmel,at91sam9x5-shdwc"; reg = <0xfc068610 0x10>; clocks = <&clk32k>; @@ -1342,7 +1342,7 @@ clocks = <&h32ck>; }; - watchdog@fc068640 { + watchdog: watchdog@fc068640 { compatible = "atmel,sama5d4-wdt"; reg = <0xfc068640 0x10>; interrupts = <4 IRQ_TYPE_LEVEL_HIGH 7>; @@ -1376,7 +1376,7 @@ }; - pinctrl@fc06a000 { + pinctrl: pinctrl@fc06a000 { #address-cells = <1>; #size-cells = <1>; compatible = "atmel,sama5d3-pinctrl", "atmel,at91sam9x5-pinctrl", "simple-bus"; diff --git a/dts/src/arm/socfpga.dtsi b/dts/src/arm/socfpga.dtsi index b38f8c2405..2d300396f0 100644 --- a/dts/src/arm/socfpga.dtsi +++ b/dts/src/arm/socfpga.dtsi @@ -22,8 +22,6 @@ #size-cells = <1>; aliases { - ethernet0 = &gmac0; - ethernet1 = &gmac1; serial0 = &uart0; serial1 = &uart1; timer0 = &timer0; @@ -483,10 +481,17 @@ clk-gate = <0xa0 9>; }; + nand_ecc_clk: nand_ecc_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&nand_x_clk>; + clk-gate = <0xa0 9>; + }; + nand_clk: nand_clk { #clock-cells = <0>; compatible = "altr,socfpga-gate-clk"; - clocks = <&f2s_periph_ref_clk>, <&main_nand_sdmmc_clk>, <&per_nand_mmc_clk>; + clocks = <&nand_x_clk>; clk-gate = <0xa0 10>; fixed-divider = <4>; }; @@ -754,7 +759,8 @@ reg-names = "nand_data", "denali_reg"; interrupts = <0x0 0x90 0x4>; dma-mask = <0xffffffff>; - clocks = <&nand_x_clk>; + clocks = <&nand_clk>, <&nand_x_clk>, <&nand_ecc_clk>; + clock-names = "nand", "nand_x", "ecc"; status = "disabled"; }; @@ -841,6 +847,8 @@ reg = <0xffc08000 0x1000>; clocks = <&l4_sp_clk>; clock-names = "timer"; + resets = <&rst SPTIMER0_RESET>; + reset-names = "timer"; }; timer1: timer1@ffc09000 { @@ -849,6 +857,8 @@ reg = <0xffc09000 0x1000>; clocks = <&l4_sp_clk>; clock-names = "timer"; + resets = <&rst SPTIMER1_RESET>; + reset-names = "timer"; }; timer2: timer2@ffd00000 { @@ -857,6 +867,8 @@ reg = <0xffd00000 0x1000>; clocks = <&osc1>; clock-names = "timer"; + resets = <&rst OSC1TIMER0_RESET>; + reset-names = "timer"; }; timer3: timer3@ffd01000 { @@ -865,6 +877,8 @@ reg = <0xffd01000 0x1000>; clocks = <&osc1>; clock-names = "timer"; + resets = <&rst OSC1TIMER1_RESET>; + reset-names = "timer"; }; uart0: serial0@ffc02000 { diff --git a/dts/src/arm/socfpga_arria10.dtsi b/dts/src/arm/socfpga_arria10.dtsi index a4dcb68f43..59ef13e375 100644 --- a/dts/src/arm/socfpga_arria10.dtsi +++ b/dts/src/arm/socfpga_arria10.dtsi @@ -377,13 +377,28 @@ clk-gate = <0xC8 11>; }; - nand_clk: nand_clk { + nand_x_clk: nand_x_clk { #clock-cells = <0>; compatible = "altr,socfpga-a10-gate-clk"; clocks = <&l4_mp_clk>; clk-gate = <0xC8 10>; }; + nand_ecc_clk: nand_ecc_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-a10-gate-clk"; + clocks = <&nand_x_clk>; + clk-gate = <0xC8 10>; + }; + + nand_clk: nand_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-a10-gate-clk"; + clocks = <&nand_x_clk>; + fixed-divider = <4>; + clk-gate = <0xC8 10>; + }; + spi_m_clk: spi_m_clk { #clock-cells = <0>; compatible = "altr,socfpga-a10-gate-clk"; @@ -613,7 +628,7 @@ status = "disabled"; }; - sdr: sdr@ffc25000 { + sdr: sdr@ffcfb100 { compatible = "altr,sdr-ctl", "syscon"; reg = <0xffcfb100 0x80>; }; @@ -650,7 +665,8 @@ reg-names = "nand_data", "denali_reg"; interrupts = <0 99 4>; dma-mask = <0xffffffff>; - clocks = <&nand_clk>; + clocks = <&nand_clk>, <&nand_x_clk>, <&nand_ecc_clk>; + clock-names = "nand", "nand_x", "ecc"; status = "disabled"; }; @@ -760,7 +776,7 @@ timer@ffffc600 { compatible = "arm,cortex-a9-twd-timer"; reg = <0xffffc600 0x100>; - interrupts = <1 13 0xf04>; + interrupts = <1 13 0xf01>; clocks = <&mpu_periph_clk>; }; @@ -770,6 +786,8 @@ reg = <0xffc02700 0x100>; clocks = <&l4_sp_clk>; clock-names = "timer"; + resets = <&rst SPTIMER0_RESET>; + reset-names = "timer"; }; timer1: timer1@ffc02800 { @@ -778,6 +796,8 @@ reg = <0xffc02800 0x100>; clocks = <&l4_sp_clk>; clock-names = "timer"; + resets = <&rst SPTIMER1_RESET>; + reset-names = "timer"; }; timer2: timer2@ffd00000 { @@ -786,6 +806,8 @@ reg = <0xffd00000 0x100>; clocks = <&l4_sys_free_clk>; clock-names = "timer"; + resets = <&rst L4SYSTIMER0_RESET>; + reset-names = "timer"; }; timer3: timer3@ffd00100 { @@ -794,6 +816,8 @@ reg = <0xffd01000 0x100>; clocks = <&l4_sys_free_clk>; clock-names = "timer"; + resets = <&rst L4SYSTIMER1_RESET>; + reset-names = "timer"; }; uart0: serial0@ffc02000 { diff --git a/dts/src/arm/socfpga_cyclone5_de0_sockit.dts b/dts/src/arm/socfpga_cyclone5_de0_nano_soc.dts index b280e64941..31b01a998b 100644 --- a/dts/src/arm/socfpga_cyclone5_de0_sockit.dts +++ b/dts/src/arm/socfpga_cyclone5_de0_nano_soc.dts @@ -88,7 +88,7 @@ status = "okay"; clock-frequency = <100000>; - adxl345: adxl345@0 { + adxl345: adxl345@53 { compatible = "adi,adxl345"; reg = <0x53>; diff --git a/dts/src/arm/socfpga_cyclone5_socrates.dts b/dts/src/arm/socfpga_cyclone5_socrates.dts index 53bf99eef6..031c721441 100644 --- a/dts/src/arm/socfpga_cyclone5_socrates.dts +++ b/dts/src/arm/socfpga_cyclone5_socrates.dts @@ -21,8 +21,13 @@ model = "EBV SOCrates"; compatible = "ebv,socrates", "altr,socfpga-cyclone5", "altr,socfpga"; + aliases { + ethernet0 = &gmac1; + }; + chosen { - bootargs = "console=ttyS0,115200"; + bootargs = "earlyprintk"; + stdout-path = "serial0:115200n8"; }; memory@0 { diff --git a/dts/src/arm/socfpga_cyclone5_vining_fpga.dts b/dts/src/arm/socfpga_cyclone5_vining_fpga.dts index f50b19447d..e61efe16e7 100644 --- a/dts/src/arm/socfpga_cyclone5_vining_fpga.dts +++ b/dts/src/arm/socfpga_cyclone5_vining_fpga.dts @@ -54,7 +54,8 @@ compatible = "samtec,vining", "altr,socfpga-cyclone5", "altr,socfpga"; chosen { - bootargs = "console=ttyS0,115200"; + bootargs = "earlyprintk"; + stdout-path = "serial0:115200n8"; }; memory@0 { diff --git a/dts/src/arm/ste-dbx5x0.dtsi b/dts/src/arm/ste-dbx5x0.dtsi index 2310a4e977..e6ed7c0354 100644 --- a/dts/src/arm/ste-dbx5x0.dtsi +++ b/dts/src/arm/ste-dbx5x0.dtsi @@ -15,9 +15,14 @@ #include <dt-bindings/arm/ux500_pm_domains.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/clock/ste-ab8500.h> -#include "skeleton.dtsi" / { + #address-cells = <1>; + #size-cells = <1>; + + chosen { + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -67,9 +72,11 @@ clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>; clock-names = "apb_pclk", "atclk"; cpu = <&CPU0>; - port { - ptm0_out_port: endpoint { - remote-endpoint = <&funnel_in_port0>; + out-ports { + port { + ptm0_out_port: endpoint { + remote-endpoint = <&funnel_in_port0>; + }; }; }; }; @@ -81,9 +88,11 @@ clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>; clock-names = "apb_pclk", "atclk"; cpu = <&CPU1>; - port { - ptm1_out_port: endpoint { - remote-endpoint = <&funnel_in_port1>; + out-ports { + port { + ptm1_out_port: endpoint { + remote-endpoint = <&funnel_in_port1>; + }; }; }; }; @@ -94,32 +103,29 @@ clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>; clock-names = "apb_pclk", "atclk"; - ports { - #address-cells = <1>; - #size-cells = <0>; - - /* funnel output ports */ - port@0 { - reg = <0>; + out-ports { + port { funnel_out_port: endpoint { remote-endpoint = <&replicator_in_port0>; }; }; + }; - /* funnel input ports */ - port@1 { + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { reg = <0>; funnel_in_port0: endpoint { - slave-mode; remote-endpoint = <&ptm0_out_port>; }; }; - port@2 { + port@1 { reg = <1>; funnel_in_port1: endpoint { - slave-mode; remote-endpoint = <&ptm1_out_port>; }; }; @@ -131,11 +137,10 @@ clocks = <&prcmu_clk PRCMU_APEATCLK>; clock-names = "atclk"; - ports { + out-ports { #address-cells = <1>; #size-cells = <0>; - /* replicator output ports */ port@0 { reg = <0>; replicator_out_port0: endpoint { @@ -148,12 +153,11 @@ remote-endpoint = <&etb_in_port>; }; }; + }; - /* replicator input port */ - port@2 { - reg = <0>; + in-ports { + port { replicator_in_port0: endpoint { - slave-mode; remote-endpoint = <&funnel_out_port>; }; }; @@ -166,10 +170,11 @@ clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>; clock-names = "apb_pclk", "atclk"; - port { - tpiu_in_port: endpoint { - slave-mode; - remote-endpoint = <&replicator_out_port0>; + in-ports { + port { + tpiu_in_port: endpoint { + remote-endpoint = <&replicator_out_port0>; + }; }; }; }; @@ -180,10 +185,11 @@ clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>; clock-names = "apb_pclk", "atclk"; - port { - etb_in_port: endpoint { - slave-mode; - remote-endpoint = <&replicator_out_port1>; + in-ports { + port { + etb_in_port: endpoint { + remote-endpoint = <&replicator_out_port1>; + }; }; }; }; @@ -197,7 +203,7 @@ <0xa0410100 0x100>; }; - scu@a04100000 { + scu@a0410000 { compatible = "arm,cortex-a9-scu"; reg = <0xa0410000 0x100>; }; @@ -487,7 +493,7 @@ }; prcmu: prcmu@80157000 { - compatible = "stericsson,db8500-prcmu"; + compatible = "stericsson,db8500-prcmu", "syscon"; reg = <0x80157000 0x2000>, <0x801b0000 0x8000>, <0x801b8000 0x1000>; reg-names = "prcmu", "prcmu-tcpm", "prcmu-tcdm"; interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; @@ -878,7 +884,7 @@ power-domains = <&pm_domains DOMAIN_VAPE>; }; - ssp@80002000 { + spi@80002000 { compatible = "arm,pl022", "arm,primecell"; reg = <0x80002000 0x1000>; interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; @@ -892,7 +898,7 @@ power-domains = <&pm_domains DOMAIN_VAPE>; }; - ssp@80003000 { + spi@80003000 { compatible = "arm,pl022", "arm,primecell"; reg = <0x80003000 0x1000>; interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; diff --git a/dts/src/arm/ste-href-family-pinctrl.dtsi b/dts/src/arm/ste-href-family-pinctrl.dtsi index 5c5cea2327..1ec193b0c5 100644 --- a/dts/src/arm/ste-href-family-pinctrl.dtsi +++ b/dts/src/arm/ste-href-family-pinctrl.dtsi @@ -607,16 +607,20 @@ mcde { lcd_default_mode: lcd_default { - default_mux { + default_mux1 { /* Mux in VSI0 and all the data lines */ function = "lcd"; groups = "lcdvsi0_a_1", /* VSI0 for LCD */ "lcd_d0_d7_a_1", /* Data lines */ "lcd_d8_d11_a_1", /* TV-out */ - "lcdaclk_b_1", /* Clock line for TV-out */ "lcdvsi1_a_1"; /* VSI1 for HDMI */ }; + default_mux2 { + function = "lcda"; + groups = + "lcdaclk_b_1"; /* Clock line for TV-out */ + }; default_cfg1 { pins = "GPIO68_E1", /* VSI0 */ diff --git a/dts/src/arm/ste-href.dtsi b/dts/src/arm/ste-href.dtsi index 9e359e4f34..feb682a3d3 100644 --- a/dts/src/arm/ste-href.dtsi +++ b/dts/src/arm/ste-href.dtsi @@ -15,6 +15,7 @@ / { memory { + device_type = "memory"; reg = <0x00000000 0x20000000>; }; diff --git a/dts/src/arm/ste-hrefprev60.dtsi b/dts/src/arm/ste-hrefprev60.dtsi index 3f14b4df69..94eeb7f1c9 100644 --- a/dts/src/arm/ste-hrefprev60.dtsi +++ b/dts/src/arm/ste-hrefprev60.dtsi @@ -57,7 +57,7 @@ }; }; - ssp@80002000 { + spi@80002000 { /* * On the first generation boards, this SSP/SPI port was connected * to the AB8500. diff --git a/dts/src/arm/ste-snowball.dts b/dts/src/arm/ste-snowball.dts index b0b94d0530..2de3ce79e4 100644 --- a/dts/src/arm/ste-snowball.dts +++ b/dts/src/arm/ste-snowball.dts @@ -26,6 +26,7 @@ }; memory { + device_type = "memory"; reg = <0x00000000 0x20000000>; }; @@ -376,7 +377,7 @@ pinctrl-1 = <&i2c3_sleep_mode>; }; - ssp@80002000 { + spi@80002000 { pinctrl-names = "default"; pinctrl-0 = <&ssp0_snowball_mode>; }; diff --git a/dts/src/arm/ste-u300.dts b/dts/src/arm/ste-u300.dts index 62ecb6a2fa..1bd1aba332 100644 --- a/dts/src/arm/ste-u300.dts +++ b/dts/src/arm/ste-u300.dts @@ -442,7 +442,7 @@ dma-names = "rx"; }; - spi: ssp@c0006000 { + spi: spi@c0006000 { compatible = "arm,pl022", "arm,primecell"; reg = <0xc0006000 0x1000>; interrupt-parent = <&vica>; diff --git a/dts/src/arm/stih410-b2260.dts b/dts/src/arm/stih410-b2260.dts index 155caa8c00..4ee6d51d8d 100644 --- a/dts/src/arm/stih410-b2260.dts +++ b/dts/src/arm/stih410-b2260.dts @@ -61,8 +61,11 @@ compatible = "simple-audio-card"; simple-audio-card,name = "STI-B2260"; status = "okay"; + #address-cells = <1>; + #size-cells = <0>; - simple-audio-card,dai-link0 { + simple-audio-card,dai-link@0 { + reg = <0>; /* DAC */ format = "i2s"; mclk-fs = <128>; diff --git a/dts/src/arm/stihxxx-b2120.dtsi b/dts/src/arm/stihxxx-b2120.dtsi index 4dedfcb0fc..97e05f55fb 100644 --- a/dts/src/arm/stihxxx-b2120.dtsi +++ b/dts/src/arm/stihxxx-b2120.dtsi @@ -27,8 +27,11 @@ compatible = "simple-audio-card"; simple-audio-card,name = "STI-B2120"; status = "okay"; + #address-cells = <1>; + #size-cells = <0>; - simple-audio-card,dai-link0 { + simple-audio-card,dai-link@0 { + reg = <0>; /* HDMI */ format = "i2s"; mclk-fs = <128>; @@ -41,7 +44,8 @@ }; }; - simple-audio-card,dai-link1 { + simple-audio-card,dai-link@1 { + reg = <1>; /* DAC */ format = "i2s"; mclk-fs = <256>; @@ -55,7 +59,8 @@ }; }; - simple-audio-card,dai-link2 { + simple-audio-card,dai-link@2 { + reg = <2>; /* SPDIF */ format = "left_j"; mclk-fs = <128>; diff --git a/dts/src/arm/stm32429i-eval.dts b/dts/src/arm/stm32429i-eval.dts index 7eb786a2d6..ed7d7f4646 100644 --- a/dts/src/arm/stm32429i-eval.dts +++ b/dts/src/arm/stm32429i-eval.dts @@ -264,8 +264,7 @@ &sdio { status = "okay"; vmmc-supply = <&mmc_vcard>; - cd-gpios = <&stmpegpio 15 GPIO_ACTIVE_HIGH>; - cd-inverted; + cd-gpios = <&stmpegpio 15 GPIO_ACTIVE_LOW>; pinctrl-names = "default", "opendrain"; pinctrl-0 = <&sdio_pins>; pinctrl-1 = <&sdio_pins_od>; diff --git a/dts/src/arm/stm32f429.dtsi b/dts/src/arm/stm32f429.dtsi index e35d782e7e..8d6f028ae2 100644 --- a/dts/src/arm/stm32f429.dtsi +++ b/dts/src/arm/stm32f429.dtsi @@ -58,7 +58,7 @@ clock-frequency = <0>; }; - clk-lse { + clk_lse: clk-lse { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <32768>; diff --git a/dts/src/arm/stm32f469-disco.dts b/dts/src/arm/stm32f469-disco.dts index 3ee768cb86..7937b43d77 100644 --- a/dts/src/arm/stm32f469-disco.dts +++ b/dts/src/arm/stm32f469-disco.dts @@ -210,8 +210,7 @@ &sdio { status = "okay"; vmmc-supply = <&mmc_vcard>; - cd-gpios = <&gpiog 2 GPIO_ACTIVE_HIGH>; - cd-inverted; + cd-gpios = <&gpiog 2 GPIO_ACTIVE_LOW>; broken-cd; pinctrl-names = "default", "opendrain"; pinctrl-0 = <&sdio_pins>; diff --git a/dts/src/arm/stm32f746-disco.dts b/dts/src/arm/stm32f746-disco.dts index f9ad71f7c8..e3a7bd338d 100644 --- a/dts/src/arm/stm32f746-disco.dts +++ b/dts/src/arm/stm32f746-disco.dts @@ -101,8 +101,7 @@ &sdio1 { status = "okay"; vmmc-supply = <&mmc_vcard>; - cd-gpios = <&gpioc 13 GPIO_ACTIVE_HIGH>; - cd-inverted; + cd-gpios = <&gpioc 13 GPIO_ACTIVE_LOW>; pinctrl-names = "default", "opendrain"; pinctrl-0 = <&sdio_pins_a>; pinctrl-1 = <&sdio_pins_od_a>; diff --git a/dts/src/arm/stm32f769-disco.dts b/dts/src/arm/stm32f769-disco.dts index 677276ba4d..483d896e2b 100644 --- a/dts/src/arm/stm32f769-disco.dts +++ b/dts/src/arm/stm32f769-disco.dts @@ -126,8 +126,7 @@ &sdio2 { status = "okay"; vmmc-supply = <&mmc_vcard>; - cd-gpios = <&gpioi 15 GPIO_ACTIVE_HIGH>; - cd-inverted; + cd-gpios = <&gpioi 15 GPIO_ACTIVE_LOW>; broken-cd; pinctrl-names = "default", "opendrain"; pinctrl-0 = <&sdio_pins_b>; diff --git a/dts/src/arm/stm32h743.dtsi b/dts/src/arm/stm32h743.dtsi index 637beffe50..cbdd69ca9e 100644 --- a/dts/src/arm/stm32h743.dtsi +++ b/dts/src/arm/stm32h743.dtsi @@ -472,7 +472,7 @@ interrupt-parent = <&exti>; interrupts = <17 IRQ_TYPE_EDGE_RISING>; interrupt-names = "alarm"; - st,syscfg = <&pwrcfg>; + st,syscfg = <&pwrcfg 0x00 0x100>; status = "disabled"; }; diff --git a/dts/src/arm/stm32mp157c-ev1.dts b/dts/src/arm/stm32mp157c-ev1.dts index 372bc2ea6b..063ee8ac5d 100644 --- a/dts/src/arm/stm32mp157c-ev1.dts +++ b/dts/src/arm/stm32mp157c-ev1.dts @@ -6,6 +6,7 @@ /dts-v1/; #include "stm32mp157c-ed1.dts" +#include <dt-bindings/gpio/gpio.h> / { model = "STMicroelectronics STM32MP157C eval daughter on eval mother"; @@ -19,6 +20,58 @@ serial0 = &uart4; ethernet0 = ðernet0; }; + + panel_backlight: panel-backlight { + compatible = "gpio-backlight"; + gpios = <&gpiod 13 GPIO_ACTIVE_LOW>; + default-on; + status = "okay"; + }; +}; + +&cec { + pinctrl-names = "default"; + pinctrl-0 = <&cec_pins_a>; + status = "okay"; +}; + +&dsi { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi_in: endpoint { + remote-endpoint = <<dc_ep0_out>; + }; + }; + + port@1 { + reg = <1>; + dsi_out: endpoint { + remote-endpoint = <&dsi_panel_in>; + }; + }; + }; + + panel-dsi@0 { + compatible = "raydium,rm68200"; + reg = <0>; + reset-gpios = <&gpiof 15 GPIO_ACTIVE_LOW>; + backlight = <&panel_backlight>; + status = "okay"; + + port { + dsi_panel_in: endpoint { + remote-endpoint = <&dsi_out>; + }; + }; + }; }; ðernet0 { @@ -40,12 +93,6 @@ }; }; -&cec { - pinctrl-names = "default"; - pinctrl-0 = <&cec_pins_a>; - status = "okay"; -}; - &i2c2 { pinctrl-names = "default"; pinctrl-0 = <&i2c2_pins_a>; @@ -62,6 +109,20 @@ status = "okay"; }; +<dc { + status = "okay"; + + port { + #address-cells = <1>; + #size-cells = <0>; + + ltdc_ep0_out: endpoint@0 { + reg = <0>; + remote-endpoint = <&dsi_in>; + }; + }; +}; + &m_can1 { pinctrl-names = "default"; pinctrl-0 = <&m_can1_pins_a>; diff --git a/dts/src/arm/stm32mp157c.dtsi b/dts/src/arm/stm32mp157c.dtsi index 185541a5b6..8bf1c17f8c 100644 --- a/dts/src/arm/stm32mp157c.dtsi +++ b/dts/src/arm/stm32mp157c.dtsi @@ -923,7 +923,7 @@ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; clocks = <&rcc HASH1>; resets = <&rcc HASH1_R>; - dmas = <&mdma1 31 0x10 0x1000A02 0x0 0x0 0x0>; + dmas = <&mdma1 31 0x10 0x1000A02 0x0 0x0>; dma-names = "in"; dma-maxburst = <2>; status = "disabled"; @@ -947,7 +947,7 @@ dma-requests = <48>; }; - qspi: qspi@58003000 { + qspi: spi@58003000 { compatible = "st,stm32f469-qspi"; reg = <0x58003000 0x1000>, <0x70000000 0x10000000>; reg-names = "qspi", "qspi_mm"; diff --git a/dts/src/arm/sun5i-reference-design-tablet.dtsi b/dts/src/arm/sun5i-reference-design-tablet.dtsi index 8acbaab14f..d2a2eb8b3f 100644 --- a/dts/src/arm/sun5i-reference-design-tablet.dtsi +++ b/dts/src/arm/sun5i-reference-design-tablet.dtsi @@ -92,7 +92,8 @@ */ clock-frequency = <400000>; - touchscreen: touchscreen { + touchscreen: touchscreen@40 { + reg = <0x40>; interrupt-parent = <&pio>; interrupts = <6 11 IRQ_TYPE_EDGE_FALLING>; /* EINT11 (PG11) */ pinctrl-names = "default"; diff --git a/dts/src/arm/sun5i.dtsi b/dts/src/arm/sun5i.dtsi index 8bfb366511..9cd65c4672 100644 --- a/dts/src/arm/sun5i.dtsi +++ b/dts/src/arm/sun5i.dtsi @@ -108,6 +108,21 @@ }; }; + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + /* Address must be kept in the lower 256 MiBs of DRAM for VE. */ + cma_pool: cma@4a000000 { + compatible = "shared-dma-pool"; + size = <0x6000000>; + alloc-ranges = <0x4a000000 0x6000000>; + reusable; + linux,cma-default; + }; + }; + soc@1c00000 { compatible = "simple-bus"; #address-cells = <1>; @@ -294,6 +309,17 @@ }; }; + video-codec@1c0e000 { + compatible = "allwinner,sun5i-a13-video-engine"; + reg = <0x01c0e000 0x1000>; + clocks = <&ccu CLK_AHB_VE>, <&ccu CLK_VE>, + <&ccu CLK_DRAM_VE>; + clock-names = "ahb", "mod", "ram"; + resets = <&ccu RST_VE>; + interrupts = <53>; + allwinner,sram = <&ve_sram 1>; + }; + mmc0: mmc@1c0f000 { compatible = "allwinner,sun5i-a13-mmc"; reg = <0x01c0f000 0x1000>; diff --git a/dts/src/arm/sun7i-a20.dtsi b/dts/src/arm/sun7i-a20.dtsi index 9c52712af2..02e40da9f0 100644 --- a/dts/src/arm/sun7i-a20.dtsi +++ b/dts/src/arm/sun7i-a20.dtsi @@ -174,6 +174,21 @@ reg = <0x40000000 0x80000000>; }; + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + /* Address must be kept in the lower 256 MiBs of DRAM for VE. */ + cma_pool: cma@4a000000 { + compatible = "shared-dma-pool"; + size = <0x6000000>; + alloc-ranges = <0x4a000000 0x6000000>; + reusable; + linux,cma-default; + }; + }; + timer { compatible = "arm,armv7-timer"; interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, @@ -479,6 +494,17 @@ }; }; + video-codec@1c0e000 { + compatible = "allwinner,sun7i-a20-video-engine"; + reg = <0x01c0e000 0x1000>; + clocks = <&ccu CLK_AHB_VE>, <&ccu CLK_VE>, + <&ccu CLK_DRAM_VE>; + clock-names = "ahb", "mod", "ram"; + resets = <&ccu RST_VE>; + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; + allwinner,sram = <&ve_sram 1>; + }; + mmc0: mmc@1c0f000 { compatible = "allwinner,sun7i-a20-mmc"; reg = <0x01c0f000 0x1000>; diff --git a/dts/src/arm/sun8i-a33.dtsi b/dts/src/arm/sun8i-a33.dtsi index 4e92741b24..c1cc8f09dd 100644 --- a/dts/src/arm/sun8i-a33.dtsi +++ b/dts/src/arm/sun8i-a33.dtsi @@ -190,6 +190,21 @@ reg = <0x40000000 0x80000000>; }; + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + /* Address must be kept in the lower 256 MiBs of DRAM for VE. */ + cma_pool: cma@4a000000 { + compatible = "shared-dma-pool"; + size = <0x6000000>; + alloc-ranges = <0x4a000000 0x6000000>; + reusable; + linux,cma-default; + }; + }; + sound: sound { compatible = "simple-audio-card"; simple-audio-card,name = "sun8i-a33-audio"; @@ -254,6 +269,17 @@ }; }; + video-codec@01c0e000 { + compatible = "allwinner,sun8i-a33-video-engine"; + reg = <0x01c0e000 0x1000>; + clocks = <&ccu CLK_BUS_VE>, <&ccu CLK_VE>, + <&ccu CLK_DRAM_VE>; + clock-names = "ahb", "mod", "ram"; + resets = <&ccu RST_BUS_VE>; + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; + allwinner,sram = <&ve_sram 1>; + }; + crypto: crypto-engine@1c15000 { compatible = "allwinner,sun4i-a10-crypto"; reg = <0x01c15000 0x1000>; diff --git a/dts/src/arm/sun8i-a83t-bananapi-m3.dts b/dts/src/arm/sun8i-a83t-bananapi-m3.dts index c7ce4158d6..742d2946b0 100644 --- a/dts/src/arm/sun8i-a83t-bananapi-m3.dts +++ b/dts/src/arm/sun8i-a83t-bananapi-m3.dts @@ -191,6 +191,11 @@ status = "okay"; }; +&r_cir { + clock-frequency = <3000000>; + status = "okay"; +}; + &r_rsb { status = "okay"; diff --git a/dts/src/arm/sun8i-a83t.dtsi b/dts/src/arm/sun8i-a83t.dtsi index 00a02b0373..5617dd387f 100644 --- a/dts/src/arm/sun8i-a83t.dtsi +++ b/dts/src/arm/sun8i-a83t.dtsi @@ -990,6 +990,19 @@ reg = <0x1f01c00 0x400>; }; + r_cir: ir@1f02000 { + compatible = "allwinner,sun8i-a83t-ir", + "allwinner,sun5i-a13-ir"; + clocks = <&r_ccu CLK_APB0_IR>, <&r_ccu CLK_IR>; + clock-names = "apb", "ir"; + resets = <&r_ccu RST_APB0_IR>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x01f02000 0x400>; + pinctrl-names = "default"; + pinctrl-0 = <&r_cir_pin>; + status = "disabled"; + }; + r_pio: pinctrl@1f02c00 { compatible = "allwinner,sun8i-a83t-r-pinctrl"; reg = <0x01f02c00 0x400>; @@ -1002,6 +1015,11 @@ interrupt-controller; #interrupt-cells = <3>; + r_cir_pin: r-cir-pin { + pins = "PL12"; + function = "s_cir_rx"; + }; + r_rsb_pins: r-rsb-pins { pins = "PL0", "PL1"; function = "s_rsb"; diff --git a/dts/src/arm/sun8i-h3-bananapi-m2-plus-v1.2.dts b/dts/src/arm/sun8i-h3-bananapi-m2-plus-v1.2.dts new file mode 100644 index 0000000000..fc4a8c3d08 --- /dev/null +++ b/dts/src/arm/sun8i-h3-bananapi-m2-plus-v1.2.dts @@ -0,0 +1,13 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2018 Chen-Yu Tsai <wens@csie.org> + */ + +/dts-v1/; +#include "sun8i-h3.dtsi" +#include "sunxi-bananapi-m2-plus-v1.2.dtsi" + +/ { + model = "Banana Pi BPI-M2-Plus v1.2 H3"; + compatible = "bananapi,bpi-m2-plus-v1.2", "allwinner,sun8i-h3"; +}; diff --git a/dts/src/arm/sun8i-h3-bananapi-m2-plus.dts b/dts/src/arm/sun8i-h3-bananapi-m2-plus.dts index 30540dc8e0..195a75da13 100644 --- a/dts/src/arm/sun8i-h3-bananapi-m2-plus.dts +++ b/dts/src/arm/sun8i-h3-bananapi-m2-plus.dts @@ -42,195 +42,9 @@ /dts-v1/; #include "sun8i-h3.dtsi" -#include "sunxi-common-regulators.dtsi" - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> +#include "sunxi-bananapi-m2-plus.dtsi" / { - model = "Banana Pi BPI-M2-Plus"; + model = "Banana Pi BPI-M2-Plus H3"; compatible = "sinovoip,bpi-m2-plus", "allwinner,sun8i-h3"; - - aliases { - ethernet0 = &emac; - serial0 = &uart0; - serial1 = &uart1; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - connector { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_con_in: endpoint { - remote-endpoint = <&hdmi_out_con>; - }; - }; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - - pwr_led { - label = "bananapi-m2-plus:red:pwr"; - gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */ - default-state = "on"; - }; - }; - - gpio_keys { - compatible = "gpio-keys"; - pinctrl-names = "default"; - - sw4 { - label = "power"; - linux,code = <BTN_0>; - gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; - }; - }; - - reg_gmac_3v3: gmac-3v3 { - compatible = "regulator-fixed"; - regulator-name = "gmac-3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - startup-delay-us = <100000>; - enable-active-high; - gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; - }; - - wifi_pwrseq: wifi_pwrseq { - compatible = "mmc-pwrseq-simple"; - pinctrl-names = "default"; - reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ - }; -}; - -&de { - status = "okay"; -}; - -&ehci0 { - status = "okay"; -}; - -&ehci1 { - status = "okay"; -}; - -&ehci2 { - status = "okay"; -}; - -&emac { - pinctrl-names = "default"; - pinctrl-0 = <&emac_rgmii_pins>; - phy-supply = <®_gmac_3v3>; - phy-handle = <&ext_rgmii_phy>; - phy-mode = "rgmii"; - - status = "okay"; -}; - -&external_mdio { - ext_rgmii_phy: ethernet-phy@1 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <0>; - }; -}; - -&hdmi { - status = "okay"; -}; - -&hdmi_out { - hdmi_out_con: endpoint { - remote-endpoint = <&hdmi_con_in>; - }; -}; - -&ir { - pinctrl-names = "default"; - pinctrl-0 = <&ir_pins_a>; - status = "okay"; -}; - -&mmc0 { - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ - status = "okay"; -}; - -&mmc1 { - vmmc-supply = <®_vcc3v3>; - vqmmc-supply = <®_vcc3v3>; - mmc-pwrseq = <&wifi_pwrseq>; - bus-width = <4>; - non-removable; - status = "okay"; - - brcmf: wifi@1 { - reg = <1>; - compatible = "brcm,bcm4329-fmac"; - interrupt-parent = <&pio>; - interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 / EINT10 */ - interrupt-names = "host-wake"; - }; -}; - -&mmc2 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc2_8bit_pins>; - vmmc-supply = <®_vcc3v3>; - vqmmc-supply = <®_vcc3v3>; - bus-width = <8>; - non-removable; - status = "okay"; -}; - -&ohci0 { - status = "okay"; -}; - -&ohci1 { - status = "okay"; -}; - -&ohci2 { - status = "okay"; -}; - -®_usb0_vbus { - gpio = <&pio 3 11 GPIO_ACTIVE_HIGH>; /* PD11 */ - status = "okay"; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; - status = "okay"; -}; - -&usb_otg { - dr_mode = "otg"; - status = "okay"; -}; - -&usbphy { - usb0_id_det-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */ - usb0_vbus-supply = <®_usb0_vbus>; - /* USB host VBUS is on as long as VCC-IO is on */ - status = "okay"; }; diff --git a/dts/src/arm/sun8i-h3-orangepi-zero-plus2.dts b/dts/src/arm/sun8i-h3-orangepi-zero-plus2.dts new file mode 100644 index 0000000000..c834048c32 --- /dev/null +++ b/dts/src/arm/sun8i-h3-orangepi-zero-plus2.dts @@ -0,0 +1,140 @@ +/* + * Copyright (C) 2017 Jagan Teki <jteki@openedev.com> + * Copyright (C) 2018 Diego Rondini <diego.rondini@kynetics.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "sun8i-h3.dtsi" + +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "OrangePi Zero Plus2 H3"; + compatible = "xunlong,orangepi-zero-plus2-h3", "allwinner,sun8i-h3"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + + reg_vcc3v3: vcc3v3 { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + reset-gpios = <&pio 0 9 GPIO_ACTIVE_LOW>; /* PA9 */ + post-power-on-delay-ms = <200>; + }; +}; + +&de { + status = "okay"; +}; + +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&mmc0 { + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&mmc1 { + vmmc-supply = <®_vcc3v3>; + vqmmc-supply = <®_vcc3v3>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; + + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + interrupt-parent = <&r_pio>; + interrupts = <0 7 IRQ_TYPE_LEVEL_LOW>; /* PL7 */ + interrupt-names = "host-wake"; + }; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_8bit_pins>; + vmmc-supply = <®_vcc3v3>; + bus-width = <8>; + non-removable; + cap-mmc-hw-reset; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; diff --git a/dts/src/arm/sun8i-h3.dtsi b/dts/src/arm/sun8i-h3.dtsi index f0096074a4..3ecfabb101 100644 --- a/dts/src/arm/sun8i-h3.dtsi +++ b/dts/src/arm/sun8i-h3.dtsi @@ -119,6 +119,20 @@ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; }; + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + cma_pool: cma@4a000000 { + compatible = "shared-dma-pool"; + size = <0x6000000>; + alloc-ranges = <0x4a000000 0x6000000>; + reusable; + linux,cma-default; + }; + }; + soc { system-control@1c00000 { compatible = "allwinner,sun8i-h3-system-control"; @@ -142,6 +156,17 @@ }; }; + video-codec@01c0e000 { + compatible = "allwinner,sun8i-h3-video-engine"; + reg = <0x01c0e000 0x1000>; + clocks = <&ccu CLK_BUS_VE>, <&ccu CLK_VE>, + <&ccu CLK_DRAM_VE>; + clock-names = "ahb", "mod", "ram"; + resets = <&ccu RST_BUS_VE>; + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; + allwinner,sram = <&ve_sram 1>; + }; + mali: gpu@1c40000 { compatible = "allwinner,sun8i-h3-mali", "arm,mali-400"; reg = <0x01c40000 0x10000>; diff --git a/dts/src/arm/sun8i-r40-bananapi-m2-ultra.dts b/dts/src/arm/sun8i-r40-bananapi-m2-ultra.dts index c39b9169ea..438b7b44da 100644 --- a/dts/src/arm/sun8i-r40-bananapi-m2-ultra.dts +++ b/dts/src/arm/sun8i-r40-bananapi-m2-ultra.dts @@ -105,6 +105,12 @@ }; }; +&ahci { + ahci-supply = <®_dldo4>; + phy-supply = <®_eldo3>; + status = "okay"; +}; + &de { status = "okay"; }; @@ -159,8 +165,7 @@ &mmc0 { vmmc-supply = <®_dcdc1>; bus-width = <4>; - cd-gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>; /* PH13 */ - cd-inverted; + cd-gpios = <&pio 7 13 GPIO_ACTIVE_LOW>; /* PH13 */ status = "okay"; }; @@ -251,6 +256,18 @@ regulator-name = "vcc-wifi"; }; +®_dldo4 { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-name = "vdd2v5-sata"; +}; + +®_eldo3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "vdd1v2-sata"; +}; + &tcon_tv0 { status = "okay"; }; diff --git a/dts/src/arm/sun8i-r40.dtsi b/dts/src/arm/sun8i-r40.dtsi index 5f547c161b..6f4c9ca5a3 100644 --- a/dts/src/arm/sun8i-r40.dtsi +++ b/dts/src/arm/sun8i-r40.dtsi @@ -529,6 +529,19 @@ #size-cells = <0>; }; + ahci: sata@1c18000 { + compatible = "allwinner,sun8i-r40-ahci"; + reg = <0x01c18000 0x1000>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_SATA>, <&ccu CLK_SATA>; + resets = <&ccu RST_BUS_SATA>; + resets-name = "ahci"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + }; + gmac: ethernet@1c50000 { compatible = "allwinner,sun8i-r40-gmac"; syscon = <&ccu>; diff --git a/dts/src/arm/sun8i-reference-design-tablet.dtsi b/dts/src/arm/sun8i-reference-design-tablet.dtsi index 880096c7e2..5e8a95af89 100644 --- a/dts/src/arm/sun8i-reference-design-tablet.dtsi +++ b/dts/src/arm/sun8i-reference-design-tablet.dtsi @@ -69,7 +69,8 @@ */ clock-frequency = <400000>; - touchscreen: touchscreen@0 { + touchscreen: touchscreen@40 { + reg = <0x40>; interrupt-parent = <&pio>; interrupts = <1 5 IRQ_TYPE_EDGE_FALLING>; /* PB5 */ pinctrl-names = "default"; diff --git a/dts/src/arm/sun8i-v40-bananapi-m2-berry.dts b/dts/src/arm/sun8i-v40-bananapi-m2-berry.dts index 35859d8f32..bf97f6244c 100644 --- a/dts/src/arm/sun8i-v40-bananapi-m2-berry.dts +++ b/dts/src/arm/sun8i-v40-bananapi-m2-berry.dts @@ -95,7 +95,7 @@ &i2c0 { status = "okay"; - axp22x: pmic@68 { + axp22x: pmic@34 { compatible = "x-powers,axp221"; reg = <0x34>; interrupt-parent = <&nmi_intc>; diff --git a/dts/src/arm/sun9i-a80.dtsi b/dts/src/arm/sun9i-a80.dtsi index 25591d6883..d9532fb1ef 100644 --- a/dts/src/arm/sun9i-a80.dtsi +++ b/dts/src/arm/sun9i-a80.dtsi @@ -1196,7 +1196,7 @@ }; }; - r_rsb: i2c@8003400 { + r_rsb: rsb@8003400 { compatible = "allwinner,sun8i-a23-rsb"; reg = <0x08003400 0x400>; interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; diff --git a/dts/src/arm/sunxi-bananapi-m2-plus-v1.2.dtsi b/dts/src/arm/sunxi-bananapi-m2-plus-v1.2.dtsi new file mode 100644 index 0000000000..53edd1faee --- /dev/null +++ b/dts/src/arm/sunxi-bananapi-m2-plus-v1.2.dtsi @@ -0,0 +1,31 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2018 Chen-Yu Tsai <wens@csie.org> + */ + +#include "sunxi-bananapi-m2-plus.dtsi" + +/ { + /* + * Bananapi M2+ v1.2 uses a GPIO line to change the effective + * resistance on the CPU regulator's feedback pin. + */ + reg_vdd_cpux: vdd-cpux { + compatible = "regulator-gpio"; + regulator-name = "vdd-cpux"; + regulator-type = "voltage"; + regulator-boot-on; + regulator-always-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1300000>; + regulator-ramp-delay = <50>; /* 4ms */ + gpios = <&r_pio 0 1 GPIO_ACTIVE_HIGH>; /* PL1 */ + gpios-states = <0x1>; + states = <1100000 0x0 + 1300000 0x1>; + }; +}; + +&cpu0 { + cpu-supply = <®_vdd_cpux>; +}; diff --git a/dts/src/arm/sunxi-bananapi-m2-plus.dtsi b/dts/src/arm/sunxi-bananapi-m2-plus.dtsi new file mode 100644 index 0000000000..b3283aeb5b --- /dev/null +++ b/dts/src/arm/sunxi-bananapi-m2-plus.dtsi @@ -0,0 +1,231 @@ +/* + * Copyright (C) 2016 Chen-Yu Tsai <wens@csie.org> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + aliases { + ethernet0 = &emac; + serial0 = &uart0; + serial1 = &uart1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + + pwr_led { + label = "bananapi-m2-plus:red:pwr"; + gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */ + default-state = "on"; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + + sw4 { + label = "power"; + linux,code = <BTN_0>; + gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; + }; + }; + + reg_gmac_3v3: gmac-3v3 { + compatible = "regulator-fixed"; + regulator-name = "gmac-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <100000>; + enable-active-high; + gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; + }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ + }; +}; + +&de { + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&ehci2 { + status = "okay"; +}; + +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&emac_rgmii_pins>; + phy-supply = <®_gmac_3v3>; + phy-handle = <&ext_rgmii_phy>; + phy-mode = "rgmii"; + + status = "okay"; +}; + +&external_mdio { + ext_rgmii_phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; +}; + +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&ir { + pinctrl-names = "default"; + pinctrl-0 = <&ir_pins_a>; + status = "okay"; +}; + +&mmc0 { + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ + status = "okay"; +}; + +&mmc1 { + vmmc-supply = <®_vcc3v3>; + vqmmc-supply = <®_vcc3v3>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; + + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + interrupt-parent = <&pio>; + interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 / EINT10 */ + interrupt-names = "host-wake"; + }; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_8bit_pins>; + vmmc-supply = <®_vcc3v3>; + vqmmc-supply = <®_vcc3v3>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&ohci2 { + status = "okay"; +}; + +®_usb0_vbus { + gpio = <&pio 3 11 GPIO_ACTIVE_HIGH>; /* PD11 */ + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usbphy { + usb0_id_det-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */ + usb0_vbus-supply = <®_usb0_vbus>; + /* USB host VBUS is on as long as VCC-IO is on */ + status = "okay"; +}; diff --git a/dts/src/arm/sunxi-h3-h5.dtsi b/dts/src/arm/sunxi-h3-h5.dtsi index fc6131315c..4b1530ebe4 100644 --- a/dts/src/arm/sunxi-h3-h5.dtsi +++ b/dts/src/arm/sunxi-h3-h5.dtsi @@ -816,7 +816,7 @@ clock-names = "apb", "ir"; resets = <&r_ccu RST_APB0_IR>; interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x01f02000 0x40>; + reg = <0x01f02000 0x400>; status = "disabled"; }; diff --git a/dts/src/arm/tegra124-apalis-eval.dts b/dts/src/arm/tegra124-apalis-eval.dts index a6ad759ddd..eaee10ef65 100644 --- a/dts/src/arm/tegra124-apalis-eval.dts +++ b/dts/src/arm/tegra124-apalis-eval.dts @@ -72,6 +72,7 @@ host1x@50000000 { hdmi@54280000 { status = "okay"; + hdmi-supply = <®_5v0>; }; }; @@ -122,7 +123,7 @@ /* * GEN2_I2C: I2C2_SDA/SCL (DDC) on MXM3 pin 205/207 (e.g. display EDID) */ - hdmi_ddc: i2c@7000c400 { + i2c@7000c400 { status = "okay"; }; @@ -141,29 +142,19 @@ spi@7000d400 { status = "okay"; spi-max-frequency = <50000000>; - - spidev0: spidev@0 { - compatible = "spidev"; - reg = <0>; - spi-max-frequency = <50000000>; - }; }; /* SPI4: Apalis SPI2 */ spi@7000da00 { status = "okay"; spi-max-frequency = <50000000>; - - spidev1: spidev@0 { - compatible = "spidev"; - reg = <0>; - spi-max-frequency = <50000000>; - }; }; /* Apalis Serial ATA */ sata@70020000 { status = "okay"; + target-5v-supply = <®_5v0>; + target-12v-supply = <®_12v0>; }; hda@70030000 { @@ -177,18 +168,18 @@ /* Apalis MMC1 */ sdhci@700b0000 { status = "okay"; + bus-width = <4>; /* MMC1_CD# */ cd-gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_LOW>; - bus-width = <4>; vqmmc-supply = <&vddio_sdmmc1>; }; /* Apalis SD1 */ sdhci@700b0400 { status = "okay"; + bus-width = <4>; /* SD1_CD# */ cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>; - bus-width = <4>; vqmmc-supply = <&vddio_sdmmc3>; }; @@ -225,11 +216,12 @@ backlight: backlight { compatible = "pwm-backlight"; - pwms = <&pwm 3 5000000>; /* BKL1_PWM */ brightness-levels = <255 231 223 207 191 159 127 0>; default-brightness-level = <6>; /* BKL1_ON */ enable-gpios = <&gpio TEGRA_GPIO(BB, 5) GPIO_ACTIVE_HIGH>; + power-supply = <®_3v3>; + pwms = <&pwm 3 5000000>; /* BKL1_PWM */ }; gpio-keys { @@ -244,6 +236,13 @@ }; }; + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3.3V_SW"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + reg_5v0: regulator-5v0 { compatible = "regulator-fixed"; regulator-name = "5V_SW"; @@ -251,6 +250,13 @@ regulator-max-microvolt = <5000000>; }; + reg_12v0: regulator-12v0 { + compatible = "regulator-fixed"; + regulator-name = "12V_SW"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + /* USBO1_EN */ reg_usbo1_vbus: regulator-usbo1-vbus { compatible = "regulator-fixed"; @@ -276,7 +282,7 @@ &gpio { /* Apalis GPIO7 MXM3 pin 15 PLX PEX 8605 PCIe Switch Reset */ - pex_perst_n { + pex-perst-n { gpio-hog; gpios = <TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>; output-high; diff --git a/dts/src/arm/tegra124-apalis-v1.2-eval.dts b/dts/src/arm/tegra124-apalis-v1.2-eval.dts index 8a8d5fa0ec..7961eb4bd8 100644 --- a/dts/src/arm/tegra124-apalis-v1.2-eval.dts +++ b/dts/src/arm/tegra124-apalis-v1.2-eval.dts @@ -11,7 +11,8 @@ / { model = "Toradex Apalis TK1 on Apalis Evaluation Board"; compatible = "toradex,apalis-tk1-v1.2-eval", "toradex,apalis-tk1-eval", - "toradex,apalis-tk1", "nvidia,tegra124"; + "toradex,apalis-tk1-v1.2", "toradex,apalis-tk1", + "nvidia,tegra124"; aliases { rtc0 = "/i2c@7000c000/rtc@68"; @@ -36,6 +37,7 @@ host1x@50000000 { hdmi@54280000 { status = "okay"; + hdmi-supply = <®_5v0>; }; }; @@ -98,7 +100,7 @@ * I2C4 (DDC): I2C4_SDA/SCL (DDC) on MXM3 pin 205/207 * (e.g. display EDID) */ - hdmi_ddc: i2c@7000c700 { + i2c@7000c700 { status = "okay"; }; @@ -106,29 +108,19 @@ spi@7000d400 { status = "okay"; spi-max-frequency = <50000000>; - - spidev0: spidev@0 { - compatible = "spidev"; - reg = <0>; - spi-max-frequency = <50000000>; - }; }; /* SPI4: Apalis SPI2 */ spi@7000da00 { status = "okay"; spi-max-frequency = <50000000>; - - spidev1: spidev@0 { - compatible = "spidev"; - reg = <0>; - spi-max-frequency = <50000000>; - }; }; /* Apalis Serial ATA */ sata@70020000 { status = "okay"; + target-5v-supply = <®_5v0>; + target-12v-supply = <®_12v0>; }; hda@70030000 { @@ -142,18 +134,18 @@ /* Apalis MMC1 */ sdhci@700b0000 { status = "okay"; + bus-width = <4>; /* MMC1_CD# */ cd-gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_LOW>; - bus-width = <4>; vqmmc-supply = <&vddio_sdmmc1>; }; /* Apalis SD1 */ sdhci@700b0400 { status = "okay"; + bus-width = <4>; /* SD1_CD# */ cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>; - bus-width = <4>; vqmmc-supply = <&vddio_sdmmc3>; }; @@ -190,11 +182,12 @@ backlight: backlight { compatible = "pwm-backlight"; - pwms = <&pwm 3 5000000>; /* BKL1_PWM */ brightness-levels = <255 231 223 207 191 159 127 0>; default-brightness-level = <6>; /* BKL1_ON */ enable-gpios = <&gpio TEGRA_GPIO(BB, 5) GPIO_ACTIVE_HIGH>; + power-supply = <®_3v3>; + pwms = <&pwm 3 5000000>; /* BKL1_PWM */ }; gpio-keys { @@ -209,6 +202,13 @@ }; }; + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3.3V_SW"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + reg_5v0: regulator-5v0 { compatible = "regulator-fixed"; regulator-name = "5V_SW"; @@ -216,6 +216,13 @@ regulator-max-microvolt = <5000000>; }; + reg_12v0: regulator-12v0 { + compatible = "regulator-fixed"; + regulator-name = "12V_SW"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + /* USBO1_EN */ reg_usbo1_vbus: regulator-usbo1-vbus { compatible = "regulator-fixed"; @@ -241,7 +248,7 @@ &gpio { /* Apalis GPIO7 MXM3 pin 15 PLX PEX 8605 PCIe Switch Reset */ - pex_perst_n { + pex-perst-n { gpio-hog; gpios = <TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>; output-high; diff --git a/dts/src/arm/tegra124-apalis-v1.2.dtsi b/dts/src/arm/tegra124-apalis-v1.2.dtsi index 573aaa50ff..367eb8c860 100644 --- a/dts/src/arm/tegra124-apalis-v1.2.dtsi +++ b/dts/src/arm/tegra124-apalis-v1.2.dtsi @@ -11,23 +11,19 @@ * Compatible for Revisions 2GB: V1.2A */ / { - model = "Toradex Apalis TK1"; - compatible = "toradex,apalis-tk1-v1.2", "toradex,apalis-tk1", - "nvidia,tegra124"; - memory@80000000 { reg = <0x0 0x80000000 0x0 0x80000000>; }; pcie@1003000 { status = "okay"; - avddio-pex-supply = <&vdd_1v05>; - avdd-pex-pll-supply = <&vdd_1v05>; - avdd-pll-erefe-supply = <&avdd_1v05>; - dvddio-pex-supply = <&vdd_1v05>; - hvdd-pex-pll-e-supply = <®_3v3>; - hvdd-pex-supply = <®_3v3>; - vddio-pex-ctl-supply = <®_3v3>; + avddio-pex-supply = <®_1v05_vdd>; + avdd-pex-pll-supply = <®_1v05_vdd>; + avdd-pll-erefe-supply = <®_1v05_avdd>; + dvddio-pex-supply = <®_1v05_vdd>; + hvdd-pex-pll-e-supply = <®_module_3v3>; + hvdd-pex-supply = <®_module_3v3>; + vddio-pex-ctl-supply = <®_module_3v3>; /* Apalis PCIe (additional lane Apalis type specific) */ pci@1,0 { @@ -42,16 +38,21 @@ phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-2}>; phy-names = "pcie-0"; status = "okay"; + + pcie@0 { + reg = <0 0 0 0 0>; + local-mac-address = [00 00 00 00 00 00]; + }; }; }; host1x@50000000 { hdmi@54280000 { - pll-supply = <®_1v05_avdd_hdmi_pll>; - vdd-supply = <®_3v3_avdd_hdmi>; nvidia,ddc-i2c-bus = <&hdmi_ddc>; nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>; + pll-supply = <®_1v05_avdd_hdmi_pll>; + vdd-supply = <®_3v3_avdd_hdmi>; }; }; @@ -60,44 +61,44 @@ * Node left disabled on purpose - the bootloader will enable * it after having set the VPR up */ - vdd-supply = <&vdd_gpu>; + vdd-supply = <®_vdd_gpu>; }; - pinmux: pinmux@70000868 { + pinmux@70000868 { pinctrl-names = "default"; pinctrl-0 = <&state_default>; state_default: pinmux { /* Analogue Audio (On-module) */ - dap3_fs_pp0 { + dap3-fs-pp0 { nvidia,pins = "dap3_fs_pp0"; nvidia,function = "i2s2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - dap3_din_pp1 { + dap3-din-pp1 { nvidia,pins = "dap3_din_pp1"; nvidia,function = "i2s2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - dap3_dout_pp2 { + dap3-dout-pp2 { nvidia,pins = "dap3_dout_pp2"; nvidia,function = "i2s2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - dap3_sclk_pp3 { + dap3-sclk-pp3 { nvidia,pins = "dap3_sclk_pp3"; nvidia,function = "i2s2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - dap_mclk1_pw4 { + dap-mclk1-pw4 { nvidia,pins = "dap_mclk1_pw4"; nvidia,function = "extperiph1"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -124,7 +125,7 @@ }; /* Apalis CAM1_MCLK */ - cam_mclk_pcc0 { + cam-mclk-pcc0 { nvidia,pins = "cam_mclk_pcc0"; nvidia,function = "vi_alt3"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -133,28 +134,28 @@ }; /* Apalis Digital Audio */ - dap2_fs_pa2 { + dap2-fs-pa2 { nvidia,pins = "dap2_fs_pa2"; nvidia,function = "hda"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - dap2_sclk_pa3 { + dap2-sclk-pa3 { nvidia,pins = "dap2_sclk_pa3"; nvidia,function = "hda"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - dap2_din_pa4 { + dap2-din-pa4 { nvidia,pins = "dap2_din_pa4"; nvidia,function = "hda"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - dap2_dout_pa5 { + dap2-dout-pa5 { nvidia,pins = "dap2_dout_pa5"; nvidia,function = "hda"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -167,7 +168,7 @@ nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - clk3_out_pee0 { + clk3-out-pee0 { nvidia,pins = "clk3_out_pee0"; nvidia,function = "extperiph3"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -176,7 +177,7 @@ }; /* Apalis GPIO */ - usb_vbus_en0_pn4 { + usb-vbus-en0-pn4 { nvidia,pins = "usb_vbus_en0_pn4"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -184,7 +185,7 @@ nvidia,enable-input = <TEGRA_PIN_ENABLE>; nvidia,open-drain = <TEGRA_PIN_DISABLE>; }; - usb_vbus_en1_pn5 { + usb-vbus-en1-pn5 { nvidia,pins = "usb_vbus_en1_pn5"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -192,35 +193,35 @@ nvidia,enable-input = <TEGRA_PIN_ENABLE>; nvidia,open-drain = <TEGRA_PIN_DISABLE>; }; - pex_l0_rst_n_pdd1 { + pex-l0-rst-n-pdd1 { nvidia,pins = "pex_l0_rst_n_pdd1"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - pex_l0_clkreq_n_pdd2 { + pex-l0-clkreq-n-pdd2 { nvidia,pins = "pex_l0_clkreq_n_pdd2"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - pex_l1_rst_n_pdd5 { + pex-l1-rst-n-pdd5 { nvidia,pins = "pex_l1_rst_n_pdd5"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - pex_l1_clkreq_n_pdd6 { + pex-l1-clkreq-n-pdd6 { nvidia,pins = "pex_l1_clkreq_n_pdd6"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - dp_hpd_pff0 { + dp-hpd-pff0 { nvidia,pins = "dp_hpd_pff0"; nvidia,function = "dp"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -244,7 +245,7 @@ }; /* Apalis HDMI1_CEC */ - hdmi_cec_pee3 { + hdmi-cec-pee3 { nvidia,pins = "hdmi_cec_pee3"; nvidia,function = "cec"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -254,7 +255,7 @@ }; /* Apalis HDMI1_HPD */ - hdmi_int_pn7 { + hdmi-int-pn7 { nvidia,pins = "hdmi_int_pn7"; nvidia,function = "rsvd1"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; @@ -264,7 +265,7 @@ }; /* Apalis I2C1 */ - gen1_i2c_scl_pc4 { + gen1-i2c-scl-pc4 { nvidia,pins = "gen1_i2c_scl_pc4"; nvidia,function = "i2c1"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -272,7 +273,7 @@ nvidia,enable-input = <TEGRA_PIN_ENABLE>; nvidia,open-drain = <TEGRA_PIN_ENABLE>; }; - gen1_i2c_sda_pc5 { + gen1-i2c-sda-pc5 { nvidia,pins = "gen1_i2c_sda_pc5"; nvidia,function = "i2c1"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -282,7 +283,7 @@ }; /* Apalis I2C3 (CAM) */ - cam_i2c_scl_pbb1 { + cam-i2c-scl-pbb1 { nvidia,pins = "cam_i2c_scl_pbb1"; nvidia,function = "i2c3"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -290,7 +291,7 @@ nvidia,enable-input = <TEGRA_PIN_ENABLE>; nvidia,open-drain = <TEGRA_PIN_ENABLE>; }; - cam_i2c_sda_pbb2 { + cam-i2c-sda-pbb2 { nvidia,pins = "cam_i2c_sda_pbb2"; nvidia,function = "i2c3"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -300,7 +301,7 @@ }; /* Apalis I2C4 (DDC) */ - ddc_scl_pv4 { + ddc-scl-pv4 { nvidia,pins = "ddc_scl_pv4"; nvidia,function = "i2c4"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -308,7 +309,7 @@ nvidia,enable-input = <TEGRA_PIN_ENABLE>; nvidia,rcv-sel = <TEGRA_PIN_ENABLE>; }; - ddc_sda_pv5 { + ddc-sda-pv5 { nvidia,pins = "ddc_sda_pv5"; nvidia,function = "i2c4"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -318,77 +319,77 @@ }; /* Apalis MMC1 */ - sdmmc1_cd_n_pv3 { /* CD# GPIO */ + sdmmc1-cd-n-pv3 { /* CD# GPIO */ nvidia,pins = "sdmmc1_wp_n_pv3"; nvidia,function = "sdmmc1"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - clk2_out_pw5 { /* D5 GPIO */ + clk2-out-pw5 { /* D5 GPIO */ nvidia,pins = "clk2_out_pw5"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - sdmmc1_dat3_py4 { + sdmmc1-dat3-py4 { nvidia,pins = "sdmmc1_dat3_py4"; nvidia,function = "sdmmc1"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - sdmmc1_dat2_py5 { + sdmmc1-dat2-py5 { nvidia,pins = "sdmmc1_dat2_py5"; nvidia,function = "sdmmc1"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - sdmmc1_dat1_py6 { + sdmmc1-dat1-py6 { nvidia,pins = "sdmmc1_dat1_py6"; nvidia,function = "sdmmc1"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - sdmmc1_dat0_py7 { + sdmmc1-dat0-py7 { nvidia,pins = "sdmmc1_dat0_py7"; nvidia,function = "sdmmc1"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - sdmmc1_clk_pz0 { + sdmmc1-clk-pz0 { nvidia,pins = "sdmmc1_clk_pz0"; nvidia,function = "sdmmc1"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - sdmmc1_cmd_pz1 { + sdmmc1-cmd-pz1 { nvidia,pins = "sdmmc1_cmd_pz1"; nvidia,function = "sdmmc1"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - clk2_req_pcc5 { /* D4 GPIO */ + clk2-req-pcc5 { /* D4 GPIO */ nvidia,pins = "clk2_req_pcc5"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - sdmmc3_clk_lb_in_pee5 { /* D6 GPIO */ + sdmmc3-clk-lb-in-pee5 { /* D6 GPIO */ nvidia,pins = "sdmmc3_clk_lb_in_pee5"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - usb_vbus_en2_pff1 { /* D7 GPIO */ + usb-vbus-en2-pff1 { /* D7 GPIO */ nvidia,pins = "usb_vbus_en2_pff1"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -428,7 +429,7 @@ }; /* Apalis SATA1_ACT# */ - dap1_dout_pn2 { + dap1-dout-pn2 { nvidia,pins = "dap1_dout_pn2"; nvidia,function = "gmi"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -437,49 +438,49 @@ }; /* Apalis SD1 */ - sdmmc3_clk_pa6 { + sdmmc3-clk-pa6 { nvidia,pins = "sdmmc3_clk_pa6"; nvidia,function = "sdmmc3"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - sdmmc3_cmd_pa7 { + sdmmc3-cmd-pa7 { nvidia,pins = "sdmmc3_cmd_pa7"; nvidia,function = "sdmmc3"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - sdmmc3_dat3_pb4 { + sdmmc3-dat3-pb4 { nvidia,pins = "sdmmc3_dat3_pb4"; nvidia,function = "sdmmc3"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - sdmmc3_dat2_pb5 { + sdmmc3-dat2-pb5 { nvidia,pins = "sdmmc3_dat2_pb5"; nvidia,function = "sdmmc3"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - sdmmc3_dat1_pb6 { + sdmmc3-dat1-pb6 { nvidia,pins = "sdmmc3_dat1_pb6"; nvidia,function = "sdmmc3"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - sdmmc3_dat0_pb7 { + sdmmc3-dat0-pb7 { nvidia,pins = "sdmmc3_dat0_pb7"; nvidia,function = "sdmmc3"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - sdmmc3_cd_n_pv2 { /* CD# GPIO */ + sdmmc3-cd-n-pv2 { /* CD# GPIO */ nvidia,pins = "sdmmc3_cd_n_pv2"; nvidia,function = "rsvd3"; nvidia,pull = <TEGRA_PIN_PULL_UP>; @@ -488,14 +489,14 @@ }; /* Apalis SPDIF */ - spdif_out_pk5 { + spdif-out-pk5 { nvidia,pins = "spdif_out_pk5"; nvidia,function = "spdif"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - spdif_in_pk6 { + spdif-in-pk6 { nvidia,pins = "spdif_in_pk6"; nvidia,function = "spdif"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -504,28 +505,28 @@ }; /* Apalis SPI1 */ - ulpi_clk_py0 { + ulpi-clk-py0 { nvidia,pins = "ulpi_clk_py0"; nvidia,function = "spi1"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - ulpi_dir_py1 { + ulpi-dir-py1 { nvidia,pins = "ulpi_dir_py1"; nvidia,function = "spi1"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - ulpi_nxt_py2 { + ulpi-nxt-py2 { nvidia,pins = "ulpi_nxt_py2"; nvidia,function = "spi1"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - ulpi_stp_py3 { + ulpi-stp-py3 { nvidia,pins = "ulpi_stp_py3"; nvidia,function = "spi1"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -578,42 +579,42 @@ nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - uart1_txd_pu0 { + uart1-txd-pu0 { nvidia,pins = "pu0"; nvidia,function = "uarta"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - uart1_rxd_pu1 { + uart1-rxd-pu1 { nvidia,pins = "pu1"; nvidia,function = "uarta"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - uart1_cts_n_pu2 { + uart1-cts-n-pu2 { nvidia,pins = "pu2"; nvidia,function = "uarta"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - uart1_rts_n_pu3 { + uart1-rts-n-pu3 { nvidia,pins = "pu3"; nvidia,function = "uarta"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - uart3_cts_n_pa1 { /* DSR GPIO */ + uart3-cts-n-pa1 { /* DSR GPIO */ nvidia,pins = "uart3_cts_n_pa1"; nvidia,function = "gmi"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - uart3_rts_n_pc0 { /* DTR GPIO */ + uart3-rts-n-pc0 { /* DTR GPIO */ nvidia,pins = "uart3_rts_n_pc0"; nvidia,function = "gmi"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -622,28 +623,28 @@ }; /* Apalis UART2 */ - uart2_txd_pc2 { + uart2-txd-pc2 { nvidia,pins = "uart2_txd_pc2"; nvidia,function = "irda"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - uart2_rxd_pc3 { + uart2-rxd-pc3 { nvidia,pins = "uart2_rxd_pc3"; nvidia,function = "irda"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - uart2_cts_n_pj5 { + uart2-cts-n-pj5 { nvidia,pins = "uart2_cts_n_pj5"; nvidia,function = "uartb"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - uart2_rts_n_pj6 { + uart2-rts-n-pj6 { nvidia,pins = "uart2_rts_n_pj6"; nvidia,function = "uartb"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -652,14 +653,14 @@ }; /* Apalis UART3 */ - uart3_txd_pw6 { + uart3-txd-pw6 { nvidia,pins = "uart3_txd_pw6"; nvidia,function = "uartc"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - uart3_rxd_pw7 { + uart3-rxd-pw7 { nvidia,pins = "uart3_rxd_pw7"; nvidia,function = "uartc"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -668,14 +669,14 @@ }; /* Apalis UART4 */ - uart4_rxd_pb0 { + uart4-rxd-pb0 { nvidia,pins = "pb0"; nvidia,function = "uartd"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - uart4_txd_pj7 { + uart4-txd-pj7 { nvidia,pins = "pj7"; nvidia,function = "uartd"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -684,7 +685,7 @@ }; /* Apalis USBH_EN */ - gen2_i2c_sda_pt6 { + gen2-i2c-sda-pt6 { nvidia,pins = "gen2_i2c_sda_pt6"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -703,7 +704,7 @@ }; /* Apalis USBO1_EN */ - gen2_i2c_scl_pt5 { + gen2-i2c-scl-pt5 { nvidia,pins = "gen2_i2c_scl_pt5"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -722,7 +723,7 @@ }; /* Apalis WAKE1_MICO */ - pex_wake_n_pdd3 { + pex-wake-n-pdd3 { nvidia,pins = "pex_wake_n_pdd3"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -731,7 +732,7 @@ }; /* CORE_PWR_REQ */ - core_pwr_req { + core-pwr-req { nvidia,pins = "core_pwr_req"; nvidia,function = "pwron"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -740,7 +741,7 @@ }; /* CPU_PWR_REQ */ - cpu_pwr_req { + cpu-pwr-req { nvidia,pins = "cpu_pwr_req"; nvidia,function = "cpu"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -749,14 +750,14 @@ }; /* DVFS */ - dvfs_pwm_px0 { + dvfs-pwm-px0 { nvidia,pins = "dvfs_pwm_px0"; nvidia,function = "cldvfs"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - dvfs_clk_px2 { + dvfs-clk-px2 { nvidia,pins = "dvfs_clk_px2"; nvidia,function = "cldvfs"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -765,70 +766,70 @@ }; /* eMMC */ - sdmmc4_dat0_paa0 { + sdmmc4-dat0-paa0 { nvidia,pins = "sdmmc4_dat0_paa0"; nvidia,function = "sdmmc4"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - sdmmc4_dat1_paa1 { + sdmmc4-dat1-paa1 { nvidia,pins = "sdmmc4_dat1_paa1"; nvidia,function = "sdmmc4"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - sdmmc4_dat2_paa2 { + sdmmc4-dat2-paa2 { nvidia,pins = "sdmmc4_dat2_paa2"; nvidia,function = "sdmmc4"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - sdmmc4_dat3_paa3 { + sdmmc4-dat3-paa3 { nvidia,pins = "sdmmc4_dat3_paa3"; nvidia,function = "sdmmc4"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - sdmmc4_dat4_paa4 { + sdmmc4-dat4-paa4 { nvidia,pins = "sdmmc4_dat4_paa4"; nvidia,function = "sdmmc4"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - sdmmc4_dat5_paa5 { + sdmmc4-dat5-paa5 { nvidia,pins = "sdmmc4_dat5_paa5"; nvidia,function = "sdmmc4"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - sdmmc4_dat6_paa6 { + sdmmc4-dat6-paa6 { nvidia,pins = "sdmmc4_dat6_paa6"; nvidia,function = "sdmmc4"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - sdmmc4_dat7_paa7 { + sdmmc4-dat7-paa7 { nvidia,pins = "sdmmc4_dat7_paa7"; nvidia,function = "sdmmc4"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - sdmmc4_clk_pcc4 { + sdmmc4-clk-pcc4 { nvidia,pins = "sdmmc4_clk_pcc4"; nvidia,function = "sdmmc4"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - sdmmc4_cmd_pt7 { + sdmmc4-cmd-pt7 { nvidia,pins = "sdmmc4_cmd_pt7"; nvidia,function = "sdmmc4"; nvidia,pull = <TEGRA_PIN_PULL_UP>; @@ -837,7 +838,7 @@ }; /* JTAG_RTCK */ - jtag_rtck { + jtag-rtck { nvidia,pins = "jtag_rtck"; nvidia,function = "rtck"; nvidia,pull = <TEGRA_PIN_PULL_UP>; @@ -846,7 +847,7 @@ }; /* LAN_DEV_OFF# */ - ulpi_data5_po6 { + ulpi-data5-po6 { nvidia,pins = "ulpi_data5_po6"; nvidia,function = "ulpi"; nvidia,pull = <TEGRA_PIN_PULL_UP>; @@ -855,7 +856,7 @@ }; /* LAN_RESET# */ - kb_row10_ps2 { + kb-row10-ps2 { nvidia,pins = "kb_row10_ps2"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_UP>; @@ -864,7 +865,7 @@ }; /* LAN_WAKE# */ - ulpi_data4_po5 { + ulpi-data4-po5 { nvidia,pins = "ulpi_data4_po5"; nvidia,function = "ulpi"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -918,35 +919,35 @@ }; /* MCU SPI */ - gpio_x4_aud_px4 { + gpio-x4-aud-px4 { nvidia,pins = "gpio_x4_aud_px4"; nvidia,function = "spi2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - gpio_x5_aud_px5 { + gpio-x5-aud-px5 { nvidia,pins = "gpio_x5_aud_px5"; nvidia,function = "spi2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - gpio_x6_aud_px6 { /* MCU_CS */ + gpio-x6-aud-px6 { /* MCU_CS */ nvidia,pins = "gpio_x6_aud_px6"; nvidia,function = "spi2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - gpio_x7_aud_px7 { + gpio-x7-aud-px7 { nvidia,pins = "gpio_x7_aud_px7"; nvidia,function = "spi2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - gpio_w2_aud_pw2 { /* MCU_CSEZP */ + gpio-w2-aud-pw2 { /* MCU_CSEZP */ nvidia,pins = "gpio_w2_aud_pw2"; nvidia,function = "spi2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -955,7 +956,7 @@ }; /* PMIC_CLK_32K */ - clk_32k_in { + clk-32k-in { nvidia,pins = "clk_32k_in"; nvidia,function = "clk"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -964,7 +965,7 @@ }; /* PMIC_CPU_OC_INT */ - clk_32k_out_pa0 { + clk-32k-out-pa0 { nvidia,pins = "clk_32k_out_pa0"; nvidia,function = "soc"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -973,7 +974,7 @@ }; /* PWR_I2C */ - pwr_i2c_scl_pz6 { + pwr-i2c-scl-pz6 { nvidia,pins = "pwr_i2c_scl_pz6"; nvidia,function = "i2cpwr"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -981,7 +982,7 @@ nvidia,enable-input = <TEGRA_PIN_ENABLE>; nvidia,open-drain = <TEGRA_PIN_ENABLE>; }; - pwr_i2c_sda_pz7 { + pwr-i2c-sda-pz7 { nvidia,pins = "pwr_i2c_sda_pz7"; nvidia,function = "i2cpwr"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -991,7 +992,7 @@ }; /* PWR_INT_N */ - pwr_int_n { + pwr-int-n { nvidia,pins = "pwr_int_n"; nvidia,function = "pmi"; nvidia,pull = <TEGRA_PIN_PULL_UP>; @@ -1009,7 +1010,7 @@ }; /* RESET_OUT_N */ - reset_out_n { + reset-out-n { nvidia,pins = "reset_out_n"; nvidia,function = "reset_out_n"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -1018,14 +1019,14 @@ }; /* SHIFT_CTRL_DIR_IN */ - kb_row0_pr0 { + kb-row0-pr0 { nvidia,pins = "kb_row0_pr0"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - kb_row1_pr1 { + kb-row1-pr1 { nvidia,pins = "kb_row1_pr1"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; @@ -1034,7 +1035,7 @@ }; /* Configure level-shifter as output for HDA */ - kb_row11_ps3 { + kb-row11-ps3 { nvidia,pins = "kb_row11_ps3"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_UP>; @@ -1043,21 +1044,21 @@ }; /* SHIFT_CTRL_DIR_OUT */ - kb_col5_pq5 { + kb-col5-pq5 { nvidia,pins = "kb_col5_pq5"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - kb_col6_pq6 { + kb-col6-pq6 { nvidia,pins = "kb_col6_pq6"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - kb_col7_pq7 { + kb-col7-pq7 { nvidia,pins = "kb_col7_pq7"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_UP>; @@ -1066,35 +1067,35 @@ }; /* SHIFT_CTRL_OE */ - kb_col0_pq0 { + kb-col0-pq0 { nvidia,pins = "kb_col0_pq0"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - kb_col1_pq1 { + kb-col1-pq1 { nvidia,pins = "kb_col1_pq1"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - kb_col2_pq2 { + kb-col2-pq2 { nvidia,pins = "kb_col2_pq2"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - kb_col4_pq4 { + kb-col4-pq4 { nvidia,pins = "kb_col4_pq4"; nvidia,function = "kbc"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - kb_row2_pr2 { + kb-row2-pr2 { nvidia,pins = "kb_row2_pr2"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; @@ -1112,7 +1113,7 @@ }; /* TOUCH_INT */ - gpio_w3_aud_pw3 { + gpio-w3-aud-pw3 { nvidia,pins = "gpio_w3_aud_pw3"; nvidia,function = "spi6"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -1253,189 +1254,189 @@ nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - dap1_fs_pn0 { /* NC */ + dap1-fs-pn0 { /* NC */ nvidia,pins = "dap1_fs_pn0"; nvidia,function = "rsvd4"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - dap1_din_pn1 { /* NC */ + dap1-din-pn1 { /* NC */ nvidia,pins = "dap1_din_pn1"; nvidia,function = "rsvd4"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - dap1_sclk_pn3 { /* NC */ + dap1-sclk-pn3 { /* NC */ nvidia,pins = "dap1_sclk_pn3"; nvidia,function = "rsvd4"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - ulpi_data7_po0 { /* NC */ + ulpi-data7-po0 { /* NC */ nvidia,pins = "ulpi_data7_po0"; nvidia,function = "ulpi"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - ulpi_data0_po1 { /* NC */ + ulpi-data0-po1 { /* NC */ nvidia,pins = "ulpi_data0_po1"; nvidia,function = "ulpi"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - ulpi_data1_po2 { /* NC */ + ulpi-data1-po2 { /* NC */ nvidia,pins = "ulpi_data1_po2"; nvidia,function = "ulpi"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - ulpi_data2_po3 { /* NC */ + ulpi-data2-po3 { /* NC */ nvidia,pins = "ulpi_data2_po3"; nvidia,function = "ulpi"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - ulpi_data3_po4 { /* NC */ + ulpi-data3-po4 { /* NC */ nvidia,pins = "ulpi_data3_po4"; nvidia,function = "ulpi"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - ulpi_data6_po7 { /* NC */ + ulpi-data6-po7 { /* NC */ nvidia,pins = "ulpi_data6_po7"; nvidia,function = "ulpi"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - dap4_fs_pp4 { /* NC */ + dap4-fs-pp4 { /* NC */ nvidia,pins = "dap4_fs_pp4"; nvidia,function = "rsvd4"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - dap4_din_pp5 { /* NC */ + dap4-din-pp5 { /* NC */ nvidia,pins = "dap4_din_pp5"; nvidia,function = "rsvd3"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - dap4_dout_pp6 { /* NC */ + dap4-dout-pp6 { /* NC */ nvidia,pins = "dap4_dout_pp6"; nvidia,function = "rsvd4"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - dap4_sclk_pp7 { /* NC */ + dap4-sclk-pp7 { /* NC */ nvidia,pins = "dap4_sclk_pp7"; nvidia,function = "rsvd3"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - kb_col3_pq3 { /* NC */ + kb-col3-pq3 { /* NC */ nvidia,pins = "kb_col3_pq3"; nvidia,function = "kbc"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - kb_row3_pr3 { /* NC */ + kb-row3-pr3 { /* NC */ nvidia,pins = "kb_row3_pr3"; nvidia,function = "kbc"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - kb_row4_pr4 { /* NC */ + kb-row4-pr4 { /* NC */ nvidia,pins = "kb_row4_pr4"; nvidia,function = "rsvd3"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - kb_row5_pr5 { /* NC */ + kb-row5-pr5 { /* NC */ nvidia,pins = "kb_row5_pr5"; nvidia,function = "rsvd3"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - kb_row6_pr6 { /* NC */ + kb-row6-pr6 { /* NC */ nvidia,pins = "kb_row6_pr6"; nvidia,function = "kbc"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - kb_row7_pr7 { /* NC */ + kb-row7-pr7 { /* NC */ nvidia,pins = "kb_row7_pr7"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - kb_row8_ps0 { /* NC */ + kb-row8-ps0 { /* NC */ nvidia,pins = "kb_row8_ps0"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - kb_row9_ps1 { /* NC */ + kb-row9-ps1 { /* NC */ nvidia,pins = "kb_row9_ps1"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - kb_row12_ps4 { /* NC */ + kb-row12-ps4 { /* NC */ nvidia,pins = "kb_row12_ps4"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - kb_row13_ps5 { /* NC */ + kb-row13-ps5 { /* NC */ nvidia,pins = "kb_row13_ps5"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - kb_row14_ps6 { /* NC */ + kb-row14-ps6 { /* NC */ nvidia,pins = "kb_row14_ps6"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - kb_row15_ps7 { /* NC */ + kb-row15-ps7 { /* NC */ nvidia,pins = "kb_row15_ps7"; nvidia,function = "rsvd3"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - kb_row16_pt0 { /* NC */ + kb-row16-pt0 { /* NC */ nvidia,pins = "kb_row16_pt0"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - kb_row17_pt1 { /* NC */ + kb-row17-pt1 { /* NC */ nvidia,pins = "kb_row17_pt1"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; @@ -1467,14 +1468,14 @@ nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - gpio_x1_aud_px1 { /* NC */ + gpio-x1-aud-px1 { /* NC */ nvidia,pins = "gpio_x1_aud_px1"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - gpio_x3_aud_px3 { /* NC */ + gpio-x3-aud-px3 { /* NC */ nvidia,pins = "gpio_x3_aud_px3"; nvidia,function = "rsvd4"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; @@ -1502,14 +1503,14 @@ nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - clk3_req_pee1 { /* NC */ + clk3-req-pee1 { /* NC */ nvidia,pins = "clk3_req_pee1"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - dap_mclk1_req_pee2 { /* NC */ + dap-mclk1-req-pee2 { /* NC */ nvidia,pins = "dap_mclk1_req_pee2"; nvidia,function = "rsvd4"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; @@ -1525,7 +1526,7 @@ * SDMMC_VENDOR_MISC_CNTRL_0 register's SDMMC_SPARE1 * bits being set to 0xfffd according to the TRM! */ - sdmmc3_clk_lb_out_pee4 { /* NC */ + sdmmc3-clk-lb-out-pee4 { /* NC */ nvidia,pins = "sdmmc3_clk_lb_out_pee4"; nvidia,function = "sdmmc3"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -1560,8 +1561,9 @@ sgtl5000: codec@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; - VDDA-supply = <®_3v3>; - VDDIO-supply = <&vddio_1v8>; + VDDA-supply = <®_module_3v3_audio>; + VDDD-supply = <®_1v8_vddio>; + VDDIO-supply = <®_1v8_vddio>; clocks = <&tegra_car TEGRA124_CLK_EXTERN1>; }; @@ -1578,14 +1580,14 @@ pinctrl-0 = <&as3722_default>; as3722_default: pinmux { - gpio2_7 { + gpio2-7 { pins = "gpio2", /* PWR_EN_+V3.3 */ "gpio7"; /* +V1.6_LPO */ function = "gpio"; bias-pull-up; }; - gpio0_1_3_4_5_6 { + gpio0-1-3-4-5-6 { pins = "gpio0", "gpio1", "gpio3", "gpio4", "gpio5", "gpio6"; bias-high-impedance; @@ -1593,18 +1595,18 @@ }; regulators { - vsup-sd2-supply = <®_3v3>; - vsup-sd3-supply = <®_3v3>; - vsup-sd4-supply = <®_3v3>; - vsup-sd5-supply = <®_3v3>; - vin-ldo0-supply = <&vddio_ddr_1v35>; - vin-ldo1-6-supply = <®_3v3>; - vin-ldo2-5-7-supply = <&vddio_1v8>; - vin-ldo3-4-supply = <®_3v3>; - vin-ldo9-10-supply = <®_3v3>; - vin-ldo11-supply = <®_3v3>; - - vdd_cpu: sd0 { + vsup-sd2-supply = <®_module_3v3>; + vsup-sd3-supply = <®_module_3v3>; + vsup-sd4-supply = <®_module_3v3>; + vsup-sd5-supply = <®_module_3v3>; + vin-ldo0-supply = <®_1v35_vddio_ddr>; + vin-ldo1-6-supply = <®_module_3v3>; + vin-ldo2-5-7-supply = <®_1v8_vddio>; + vin-ldo3-4-supply = <®_module_3v3>; + vin-ldo9-10-supply = <®_module_3v3>; + vin-ldo11-supply = <®_module_3v3>; + + reg_vdd_cpu: sd0 { regulator-name = "+VDD_CPU_AP"; regulator-min-microvolt = <700000>; regulator-max-microvolt = <1400000>; @@ -1626,7 +1628,7 @@ ams,ext-control = <1>; }; - vddio_ddr_1v35: sd2 { + reg_1v35_vddio_ddr: sd2 { regulator-name = "+V1.35_VDDIO_DDR(sd2)"; regulator-min-microvolt = <1350000>; @@ -1644,13 +1646,13 @@ regulator-boot-on; }; - vdd_1v05: sd4 { + reg_1v05_vdd: sd4 { regulator-name = "+V1.05"; regulator-min-microvolt = <1050000>; regulator-max-microvolt = <1050000>; }; - vddio_1v8: sd5 { + reg_1v8_vddio: sd5 { regulator-name = "+V1.8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -1658,7 +1660,7 @@ regulator-always-on; }; - vdd_gpu: sd6 { + reg_vdd_gpu: sd6 { regulator-name = "+VDD_GPU_AP"; regulator-min-microvolt = <650000>; regulator-max-microvolt = <1200000>; @@ -1668,7 +1670,7 @@ regulator-always-on; }; - avdd_1v05: ldo0 { + reg_1v05_avdd: ldo0 { regulator-name = "+V1.05_AVDD"; regulator-min-microvolt = <1050000>; regulator-max-microvolt = <1050000>; @@ -1743,12 +1745,13 @@ * TMP451 temperature sensor * Note: THERM_N directly connected to AS3722 PMIC THERM */ - temperature-sensor@4c { + temp-sensor@4c { compatible = "ti,tmp451"; reg = <0x4c>; interrupt-parent = <&gpio>; interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>; #thermal-sensor-cells = <1>; + vcc-supply = <®_module_3v3>; }; }; @@ -1780,9 +1783,9 @@ sata@70020000 { phys = <&{/padctl@7009f000/pads/sata/lanes/sata-0}>; phy-names = "sata-0"; - avdd-supply = <&vdd_1v05>; - hvdd-supply = <®_3v3>; - vddio-supply = <&vdd_1v05>; + avdd-supply = <®_1v05_vdd>; + hvdd-supply = <®_module_3v3>; + vddio-supply = <®_1v05_vdd>; }; usb@70090000 { @@ -1793,14 +1796,14 @@ <&{/padctl@7009f000/pads/usb2/lanes/usb2-2}>, <&{/padctl@7009f000/pads/pcie/lanes/pcie-0}>; phy-names = "usb2-0", "usb3-1", "usb2-1", "usb2-2", "usb3-0"; - avddio-pex-supply = <&vdd_1v05>; - avdd-pll-erefe-supply = <&avdd_1v05>; - avdd-pll-utmip-supply = <&vddio_1v8>; - avdd-usb-ss-pll-supply = <&vdd_1v05>; - avdd-usb-supply = <®_3v3>; - dvddio-pex-supply = <&vdd_1v05>; - hvdd-usb-ss-pll-e-supply = <®_3v3>; - hvdd-usb-ss-supply = <®_3v3>; + avddio-pex-supply = <®_1v05_vdd>; + avdd-pll-erefe-supply = <®_1v05_avdd>; + avdd-pll-utmip-supply = <®_1v8_vddio>; + avdd-usb-ss-pll-supply = <®_1v05_vdd>; + avdd-usb-supply = <®_module_3v3>; + dvddio-pex-supply = <®_1v05_vdd>; + hvdd-usb-ss-pll-e-supply = <®_module_3v3>; + hvdd-usb-ss-supply = <®_module_3v3>; }; padctl@7009f000 { @@ -1810,18 +1813,18 @@ lanes { usb2-0 { - nvidia,function = "xusb"; status = "okay"; + nvidia,function = "xusb"; }; usb2-1 { - nvidia,function = "xusb"; status = "okay"; + nvidia,function = "xusb"; }; usb2-2 { - nvidia,function = "xusb"; status = "okay"; + nvidia,function = "xusb"; }; }; }; @@ -1831,28 +1834,28 @@ lanes { pcie-0 { - nvidia,function = "usb3-ss"; status = "okay"; + nvidia,function = "usb3-ss"; }; pcie-1 { - nvidia,function = "usb3-ss"; status = "okay"; + nvidia,function = "usb3-ss"; }; pcie-2 { - nvidia,function = "pcie"; status = "okay"; + nvidia,function = "pcie"; }; pcie-3 { - nvidia,function = "pcie"; status = "okay"; + nvidia,function = "pcie"; }; pcie-4 { - nvidia,function = "pcie"; status = "okay"; + nvidia,function = "pcie"; }; }; }; @@ -1862,8 +1865,8 @@ lanes { sata-0 { - nvidia,function = "sata"; status = "okay"; + nvidia,function = "sata"; }; }; }; @@ -1874,7 +1877,6 @@ usb2-0 { status = "okay"; mode = "otg"; - vbus-supply = <®_usbo1_vbus>; }; @@ -1882,7 +1884,6 @@ usb2-1 { status = "okay"; mode = "host"; - vbus-supply = <®_usbh_vbus>; }; @@ -1890,18 +1891,19 @@ usb2-2 { status = "okay"; mode = "host"; - vbus-supply = <®_usbh_vbus>; }; usb3-0 { - nvidia,usb2-companion = <2>; status = "okay"; + nvidia,usb2-companion = <2>; + vbus-supply = <®_usbh_vbus>; }; usb3-1 { - nvidia,usb2-companion = <0>; status = "okay"; + nvidia,usb2-companion = <0>; + vbus-supply = <®_usbo1_vbus>; }; }; }; @@ -1911,13 +1913,16 @@ status = "okay"; bus-width = <8>; non-removable; + vmmc-supply = <®_module_3v3>; /* VCC */ + vqmmc-supply = <®_1v8_vddio>; /* VCCQ */ + mmc-ddr-1_8v; }; /* CPU DFLL clock */ clock@70110000 { status = "okay"; - vdd-cpu-supply = <&vdd_cpu>; nvidia,i2c-fs-rate = <400000>; + vdd-cpu-supply = <®_vdd_cpu>; }; ahub@70300000 { @@ -1926,22 +1931,15 @@ }; }; - clocks { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - clk32k_in: clock@0 { - compatible = "fixed-clock"; - reg = <0>; - #clock-cells = <0>; - clock-frequency = <32768>; - }; + clk32k_in: osc3 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; }; cpus { cpu@0 { - vdd-cpu-supply = <&vdd_cpu>; + vdd-cpu-supply = <®_vdd_cpu>; }; }; @@ -1951,7 +1949,7 @@ regulator-min-microvolt = <1050000>; regulator-max-microvolt = <1050000>; gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>; - vin-supply = <&vdd_1v05>; + vin-supply = <®_1v05_vdd>; }; reg_3v3_mxm: regulator-3v3-mxm { @@ -1963,7 +1961,15 @@ regulator-boot-on; }; - reg_3v3: regulator-3v3 { + reg_3v3_avdd_hdmi: regulator-3v3-avdd-hdmi { + compatible = "regulator-fixed"; + regulator-name = "+V3.3_AVDD_HDMI"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <®_1v05_vdd>; + }; + + reg_module_3v3: regulator-module-3v3 { compatible = "regulator-fixed"; regulator-name = "+V3.3"; regulator-min-microvolt = <3300000>; @@ -1976,12 +1982,12 @@ vin-supply = <®_3v3_mxm>; }; - reg_3v3_avdd_hdmi: regulator-3v3-avdd-hdmi { + reg_module_3v3_audio: regulator-module-3v3-audio { compatible = "regulator-fixed"; - regulator-name = "+V3.3_AVDD_HDMI"; + regulator-name = "+V3.3_AUDIO_AVDD_S"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - vin-supply = <&vdd_1v05>; + regulator-always-on; }; sound { @@ -2035,7 +2041,7 @@ &gpio { /* I210 Gigabit Ethernet Controller Reset */ - lan_reset_n { + lan-reset-n { gpio-hog; gpios = <TEGRA_GPIO(S, 2) GPIO_ACTIVE_HIGH>; output-high; @@ -2043,7 +2049,7 @@ }; /* Control MXM3 pin 26 Reset Module Output Carrier Input */ - reset_moci_ctrl { + reset-moci-ctrl { gpio-hog; gpios = <TEGRA_GPIO(U, 4) GPIO_ACTIVE_HIGH>; output-high; diff --git a/dts/src/arm/tegra124-apalis.dtsi b/dts/src/arm/tegra124-apalis.dtsi index 0f0d4a4988..13c93cd507 100644 --- a/dts/src/arm/tegra124-apalis.dtsi +++ b/dts/src/arm/tegra124-apalis.dtsi @@ -47,22 +47,19 @@ * Compatible for Revisions 2GB: V1.0A, V1.0B, V1.1A */ / { - model = "Toradex Apalis TK1"; - compatible = "toradex,apalis-tk1", "nvidia,tegra124"; - memory@80000000 { reg = <0x0 0x80000000 0x0 0x80000000>; }; pcie@1003000 { status = "okay"; - avddio-pex-supply = <&vdd_1v05>; - avdd-pex-pll-supply = <&vdd_1v05>; - avdd-pll-erefe-supply = <&avdd_1v05>; - dvddio-pex-supply = <&vdd_1v05>; - hvdd-pex-pll-e-supply = <®_3v3>; - hvdd-pex-supply = <®_3v3>; - vddio-pex-ctl-supply = <®_3v3>; + avddio-pex-supply = <®_1v05_vdd>; + avdd-pex-pll-supply = <®_1v05_vdd>; + avdd-pll-erefe-supply = <®_1v05_avdd>; + dvddio-pex-supply = <®_1v05_vdd>; + hvdd-pex-pll-e-supply = <®_module_3v3>; + hvdd-pex-supply = <®_module_3v3>; + vddio-pex-ctl-supply = <®_module_3v3>; /* Apalis PCIe (additional lane Apalis type specific) */ pci@1,0 { @@ -77,16 +74,21 @@ phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-2}>; phy-names = "pcie-0"; status = "okay"; + + pcie@0 { + reg = <0 0 0 0 0>; + local-mac-address = [00 00 00 00 00 00]; + }; }; }; host1x@50000000 { hdmi@54280000 { - pll-supply = <®_1v05_avdd_hdmi_pll>; - vdd-supply = <®_3v3_avdd_hdmi>; nvidia,ddc-i2c-bus = <&hdmi_ddc>; nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>; + pll-supply = <®_1v05_avdd_hdmi_pll>; + vdd-supply = <®_3v3_avdd_hdmi>; }; }; @@ -95,44 +97,44 @@ * Node left disabled on purpose - the bootloader will enable * it after having set the VPR up */ - vdd-supply = <&vdd_gpu>; + vdd-supply = <®_vdd_gpu>; }; - pinmux: pinmux@70000868 { + pinmux@70000868 { pinctrl-names = "default"; pinctrl-0 = <&state_default>; state_default: pinmux { /* Analogue Audio (On-module) */ - dap3_fs_pp0 { + dap3-fs-pp0 { nvidia,pins = "dap3_fs_pp0"; nvidia,function = "i2s2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - dap3_din_pp1 { + dap3-din-pp1 { nvidia,pins = "dap3_din_pp1"; nvidia,function = "i2s2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - dap3_dout_pp2 { + dap3-dout-pp2 { nvidia,pins = "dap3_dout_pp2"; nvidia,function = "i2s2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - dap3_sclk_pp3 { + dap3-sclk-pp3 { nvidia,pins = "dap3_sclk_pp3"; nvidia,function = "i2s2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - dap_mclk1_pw4 { + dap-mclk1-pw4 { nvidia,pins = "dap_mclk1_pw4"; nvidia,function = "extperiph1"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -159,7 +161,7 @@ }; /* Apalis CAM1_MCLK */ - cam_mclk_pcc0 { + cam-mclk-pcc0 { nvidia,pins = "cam_mclk_pcc0"; nvidia,function = "vi_alt3"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -168,28 +170,28 @@ }; /* Apalis Digital Audio */ - dap2_fs_pa2 { + dap2-fs-pa2 { nvidia,pins = "dap2_fs_pa2"; nvidia,function = "hda"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - dap2_sclk_pa3 { + dap2-sclk-pa3 { nvidia,pins = "dap2_sclk_pa3"; nvidia,function = "hda"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - dap2_din_pa4 { + dap2-din-pa4 { nvidia,pins = "dap2_din_pa4"; nvidia,function = "hda"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - dap2_dout_pa5 { + dap2-dout-pa5 { nvidia,pins = "dap2_dout_pa5"; nvidia,function = "hda"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -202,7 +204,7 @@ nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - clk3_out_pee0 { + clk3-out-pee0 { nvidia,pins = "clk3_out_pee0"; nvidia,function = "extperiph3"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -211,49 +213,49 @@ }; /* Apalis GPIO */ - ddc_scl_pv4 { + ddc-scl-pv4 { nvidia,pins = "ddc_scl_pv4"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - ddc_sda_pv5 { + ddc-sda-pv5 { nvidia,pins = "ddc_sda_pv5"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - pex_l0_rst_n_pdd1 { + pex-l0-rst-n-pdd1 { nvidia,pins = "pex_l0_rst_n_pdd1"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - pex_l0_clkreq_n_pdd2 { + pex-l0-clkreq-n-pdd2 { nvidia,pins = "pex_l0_clkreq_n_pdd2"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - pex_l1_rst_n_pdd5 { + pex-l1-rst-n-pdd5 { nvidia,pins = "pex_l1_rst_n_pdd5"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - pex_l1_clkreq_n_pdd6 { + pex-l1-clkreq-n-pdd6 { nvidia,pins = "pex_l1_clkreq_n_pdd6"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - dp_hpd_pff0 { + dp-hpd-pff0 { nvidia,pins = "dp_hpd_pff0"; nvidia,function = "dp"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -277,7 +279,7 @@ }; /* Apalis HDMI1_CEC */ - hdmi_cec_pee3 { + hdmi-cec-pee3 { nvidia,pins = "hdmi_cec_pee3"; nvidia,function = "cec"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -287,7 +289,7 @@ }; /* Apalis HDMI1_HPD */ - hdmi_int_pn7 { + hdmi-int-pn7 { nvidia,pins = "hdmi_int_pn7"; nvidia,function = "rsvd1"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; @@ -297,7 +299,7 @@ }; /* Apalis I2C1 */ - gen1_i2c_scl_pc4 { + gen1-i2c-scl-pc4 { nvidia,pins = "gen1_i2c_scl_pc4"; nvidia,function = "i2c1"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -305,7 +307,7 @@ nvidia,enable-input = <TEGRA_PIN_ENABLE>; nvidia,open-drain = <TEGRA_PIN_ENABLE>; }; - gen1_i2c_sda_pc5 { + gen1-i2c-sda-pc5 { nvidia,pins = "gen1_i2c_sda_pc5"; nvidia,function = "i2c1"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -315,7 +317,7 @@ }; /* Apalis I2C2 (DDC) */ - gen2_i2c_scl_pt5 { + gen2-i2c-scl-pt5 { nvidia,pins = "gen2_i2c_scl_pt5"; nvidia,function = "i2c2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -323,7 +325,7 @@ nvidia,enable-input = <TEGRA_PIN_ENABLE>; nvidia,open-drain = <TEGRA_PIN_ENABLE>; }; - gen2_i2c_sda_pt6 { + gen2-i2c-sda-pt6 { nvidia,pins = "gen2_i2c_sda_pt6"; nvidia,function = "i2c2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -333,7 +335,7 @@ }; /* Apalis I2C3 (CAM) */ - cam_i2c_scl_pbb1 { + cam-i2c-scl-pbb1 { nvidia,pins = "cam_i2c_scl_pbb1"; nvidia,function = "i2c3"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -341,7 +343,7 @@ nvidia,enable-input = <TEGRA_PIN_ENABLE>; nvidia,open-drain = <TEGRA_PIN_ENABLE>; }; - cam_i2c_sda_pbb2 { + cam-i2c-sda-pbb2 { nvidia,pins = "cam_i2c_sda_pbb2"; nvidia,function = "i2c3"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -351,77 +353,77 @@ }; /* Apalis MMC1 */ - sdmmc1_cd_n_pv3 { /* CD# GPIO */ + sdmmc1-cd-n-pv3 { /* CD# GPIO */ nvidia,pins = "sdmmc1_wp_n_pv3"; nvidia,function = "sdmmc1"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - clk2_out_pw5 { /* D5 GPIO */ + clk2-out-pw5 { /* D5 GPIO */ nvidia,pins = "clk2_out_pw5"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - sdmmc1_dat3_py4 { + sdmmc1-dat3-py4 { nvidia,pins = "sdmmc1_dat3_py4"; nvidia,function = "sdmmc1"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - sdmmc1_dat2_py5 { + sdmmc1-dat2-py5 { nvidia,pins = "sdmmc1_dat2_py5"; nvidia,function = "sdmmc1"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - sdmmc1_dat1_py6 { + sdmmc1-dat1-py6 { nvidia,pins = "sdmmc1_dat1_py6"; nvidia,function = "sdmmc1"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - sdmmc1_dat0_py7 { + sdmmc1-dat0-py7 { nvidia,pins = "sdmmc1_dat0_py7"; nvidia,function = "sdmmc1"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - sdmmc1_clk_pz0 { + sdmmc1-clk-pz0 { nvidia,pins = "sdmmc1_clk_pz0"; nvidia,function = "sdmmc1"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - sdmmc1_cmd_pz1 { + sdmmc1-cmd-pz1 { nvidia,pins = "sdmmc1_cmd_pz1"; nvidia,function = "sdmmc1"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - clk2_req_pcc5 { /* D4 GPIO */ + clk2-req-pcc5 { /* D4 GPIO */ nvidia,pins = "clk2_req_pcc5"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - sdmmc3_clk_lb_in_pee5 { /* D6 GPIO */ + sdmmc3-clk-lb-in-pee5 { /* D6 GPIO */ nvidia,pins = "sdmmc3_clk_lb_in_pee5"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - usb_vbus_en2_pff1 { /* D7 GPIO */ + usb-vbus-en2-pff1 { /* D7 GPIO */ nvidia,pins = "usb_vbus_en2_pff1"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -461,7 +463,7 @@ }; /* Apalis SATA1_ACT# */ - dap1_dout_pn2 { + dap1-dout-pn2 { nvidia,pins = "dap1_dout_pn2"; nvidia,function = "gmi"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -470,49 +472,49 @@ }; /* Apalis SD1 */ - sdmmc3_clk_pa6 { + sdmmc3-clk-pa6 { nvidia,pins = "sdmmc3_clk_pa6"; nvidia,function = "sdmmc3"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - sdmmc3_cmd_pa7 { + sdmmc3-cmd-pa7 { nvidia,pins = "sdmmc3_cmd_pa7"; nvidia,function = "sdmmc3"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - sdmmc3_dat3_pb4 { + sdmmc3-dat3-pb4 { nvidia,pins = "sdmmc3_dat3_pb4"; nvidia,function = "sdmmc3"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - sdmmc3_dat2_pb5 { + sdmmc3-dat2-pb5 { nvidia,pins = "sdmmc3_dat2_pb5"; nvidia,function = "sdmmc3"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - sdmmc3_dat1_pb6 { + sdmmc3-dat1-pb6 { nvidia,pins = "sdmmc3_dat1_pb6"; nvidia,function = "sdmmc3"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - sdmmc3_dat0_pb7 { + sdmmc3-dat0-pb7 { nvidia,pins = "sdmmc3_dat0_pb7"; nvidia,function = "sdmmc3"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - sdmmc3_cd_n_pv2 { /* CD# GPIO */ + sdmmc3-cd-n-pv2 { /* CD# GPIO */ nvidia,pins = "sdmmc3_cd_n_pv2"; nvidia,function = "rsvd3"; nvidia,pull = <TEGRA_PIN_PULL_UP>; @@ -521,14 +523,14 @@ }; /* Apalis SPDIF */ - spdif_out_pk5 { + spdif-out-pk5 { nvidia,pins = "spdif_out_pk5"; nvidia,function = "spdif"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - spdif_in_pk6 { + spdif-in-pk6 { nvidia,pins = "spdif_in_pk6"; nvidia,function = "spdif"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -537,28 +539,28 @@ }; /* Apalis SPI1 */ - ulpi_clk_py0 { + ulpi-clk-py0 { nvidia,pins = "ulpi_clk_py0"; nvidia,function = "spi1"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - ulpi_dir_py1 { + ulpi-dir-py1 { nvidia,pins = "ulpi_dir_py1"; nvidia,function = "spi1"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - ulpi_nxt_py2 { + ulpi-nxt-py2 { nvidia,pins = "ulpi_nxt_py2"; nvidia,function = "spi1"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - ulpi_stp_py3 { + ulpi-stp-py3 { nvidia,pins = "ulpi_stp_py3"; nvidia,function = "spi1"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -611,42 +613,42 @@ nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - uart1_txd_pu0 { + uart1-txd-pu0 { nvidia,pins = "pu0"; nvidia,function = "uarta"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - uart1_rxd_pu1 { + uart1-rxd-pu1 { nvidia,pins = "pu1"; nvidia,function = "uarta"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - uart1_cts_n_pu2 { + uart1-cts-n-pu2 { nvidia,pins = "pu2"; nvidia,function = "uarta"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - uart1_rts_n_pu3 { + uart1-rts-n-pu3 { nvidia,pins = "pu3"; nvidia,function = "uarta"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - uart3_cts_n_pa1 { /* DSR GPIO */ + uart3-cts-n-pa1 { /* DSR GPIO */ nvidia,pins = "uart3_cts_n_pa1"; nvidia,function = "gmi"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - uart3_rts_n_pc0 { /* DTR GPIO */ + uart3-rts-n-pc0 { /* DTR GPIO */ nvidia,pins = "uart3_rts_n_pc0"; nvidia,function = "gmi"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -655,28 +657,28 @@ }; /* Apalis UART2 */ - uart2_txd_pc2 { + uart2-txd-pc2 { nvidia,pins = "uart2_txd_pc2"; nvidia,function = "irda"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - uart2_rxd_pc3 { + uart2-rxd-pc3 { nvidia,pins = "uart2_rxd_pc3"; nvidia,function = "irda"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - uart2_cts_n_pj5 { + uart2-cts-n-pj5 { nvidia,pins = "uart2_cts_n_pj5"; nvidia,function = "uartb"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - uart2_rts_n_pj6 { + uart2-rts-n-pj6 { nvidia,pins = "uart2_rts_n_pj6"; nvidia,function = "uartb"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -685,14 +687,14 @@ }; /* Apalis UART3 */ - uart3_txd_pw6 { + uart3-txd-pw6 { nvidia,pins = "uart3_txd_pw6"; nvidia,function = "uartc"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - uart3_rxd_pw7 { + uart3-rxd-pw7 { nvidia,pins = "uart3_rxd_pw7"; nvidia,function = "uartc"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -701,14 +703,14 @@ }; /* Apalis UART4 */ - uart4_rxd_pb0 { + uart4-rxd-pb0 { nvidia,pins = "pb0"; nvidia,function = "uartd"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - uart4_txd_pj7 { + uart4-txd-pj7 { nvidia,pins = "pj7"; nvidia,function = "uartd"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -717,7 +719,7 @@ }; /* Apalis USBH_EN */ - usb_vbus_en1_pn5 { + usb-vbus-en1-pn5 { nvidia,pins = "usb_vbus_en1_pn5"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -736,7 +738,7 @@ }; /* Apalis USBO1_EN */ - usb_vbus_en0_pn4 { + usb-vbus-en0-pn4 { nvidia,pins = "usb_vbus_en0_pn4"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -755,7 +757,7 @@ }; /* Apalis WAKE1_MICO */ - pex_wake_n_pdd3 { + pex-wake-n-pdd3 { nvidia,pins = "pex_wake_n_pdd3"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -764,7 +766,7 @@ }; /* CORE_PWR_REQ */ - core_pwr_req { + core-pwr-req { nvidia,pins = "core_pwr_req"; nvidia,function = "pwron"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -773,7 +775,7 @@ }; /* CPU_PWR_REQ */ - cpu_pwr_req { + cpu-pwr-req { nvidia,pins = "cpu_pwr_req"; nvidia,function = "cpu"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -782,14 +784,14 @@ }; /* DVFS */ - dvfs_pwm_px0 { + dvfs-pwm-px0 { nvidia,pins = "dvfs_pwm_px0"; nvidia,function = "cldvfs"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - dvfs_clk_px2 { + dvfs-clk-px2 { nvidia,pins = "dvfs_clk_px2"; nvidia,function = "cldvfs"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -798,70 +800,70 @@ }; /* eMMC */ - sdmmc4_dat0_paa0 { + sdmmc4-dat0-paa0 { nvidia,pins = "sdmmc4_dat0_paa0"; nvidia,function = "sdmmc4"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - sdmmc4_dat1_paa1 { + sdmmc4-dat1-paa1 { nvidia,pins = "sdmmc4_dat1_paa1"; nvidia,function = "sdmmc4"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - sdmmc4_dat2_paa2 { + sdmmc4-dat2-paa2 { nvidia,pins = "sdmmc4_dat2_paa2"; nvidia,function = "sdmmc4"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - sdmmc4_dat3_paa3 { + sdmmc4-dat3-paa3 { nvidia,pins = "sdmmc4_dat3_paa3"; nvidia,function = "sdmmc4"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - sdmmc4_dat4_paa4 { + sdmmc4-dat4-paa4 { nvidia,pins = "sdmmc4_dat4_paa4"; nvidia,function = "sdmmc4"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - sdmmc4_dat5_paa5 { + sdmmc4-dat5-paa5 { nvidia,pins = "sdmmc4_dat5_paa5"; nvidia,function = "sdmmc4"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - sdmmc4_dat6_paa6 { + sdmmc4-dat6-paa6 { nvidia,pins = "sdmmc4_dat6_paa6"; nvidia,function = "sdmmc4"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - sdmmc4_dat7_paa7 { + sdmmc4-dat7-paa7 { nvidia,pins = "sdmmc4_dat7_paa7"; nvidia,function = "sdmmc4"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - sdmmc4_clk_pcc4 { + sdmmc4-clk-pcc4 { nvidia,pins = "sdmmc4_clk_pcc4"; nvidia,function = "sdmmc4"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - sdmmc4_cmd_pt7 { + sdmmc4-cmd-pt7 { nvidia,pins = "sdmmc4_cmd_pt7"; nvidia,function = "sdmmc4"; nvidia,pull = <TEGRA_PIN_PULL_UP>; @@ -870,7 +872,7 @@ }; /* JTAG_RTCK */ - jtag_rtck { + jtag-rtck { nvidia,pins = "jtag_rtck"; nvidia,function = "rtck"; nvidia,pull = <TEGRA_PIN_PULL_UP>; @@ -879,7 +881,7 @@ }; /* LAN_DEV_OFF# */ - ulpi_data5_po6 { + ulpi-data5-po6 { nvidia,pins = "ulpi_data5_po6"; nvidia,function = "ulpi"; nvidia,pull = <TEGRA_PIN_PULL_UP>; @@ -888,7 +890,7 @@ }; /* LAN_RESET# */ - kb_row10_ps2 { + kb-row10-ps2 { nvidia,pins = "kb_row10_ps2"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_UP>; @@ -897,7 +899,7 @@ }; /* LAN_WAKE# */ - ulpi_data4_po5 { + ulpi-data4-po5 { nvidia,pins = "ulpi_data4_po5"; nvidia,function = "ulpi"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -951,35 +953,35 @@ }; /* MCU SPI */ - gpio_x4_aud_px4 { + gpio-x4-aud-px4 { nvidia,pins = "gpio_x4_aud_px4"; nvidia,function = "spi2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - gpio_x5_aud_px5 { + gpio-x5-aud-px5 { nvidia,pins = "gpio_x5_aud_px5"; nvidia,function = "spi2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - gpio_x6_aud_px6 { /* MCU_CS */ + gpio-x6-aud-px6 { /* MCU_CS */ nvidia,pins = "gpio_x6_aud_px6"; nvidia,function = "spi2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - gpio_x7_aud_px7 { + gpio-x7-aud-px7 { nvidia,pins = "gpio_x7_aud_px7"; nvidia,function = "spi2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - gpio_w2_aud_pw2 { /* MCU_CSEZP */ + gpio-w2-aud-pw2 { /* MCU_CSEZP */ nvidia,pins = "gpio_w2_aud_pw2"; nvidia,function = "spi2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -988,7 +990,7 @@ }; /* PMIC_CLK_32K */ - clk_32k_in { + clk-32k-in { nvidia,pins = "clk_32k_in"; nvidia,function = "clk"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -997,7 +999,7 @@ }; /* PMIC_CPU_OC_INT */ - clk_32k_out_pa0 { + clk-32k-out-pa0 { nvidia,pins = "clk_32k_out_pa0"; nvidia,function = "soc"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -1006,7 +1008,7 @@ }; /* PWR_I2C */ - pwr_i2c_scl_pz6 { + pwr-i2c-scl-pz6 { nvidia,pins = "pwr_i2c_scl_pz6"; nvidia,function = "i2cpwr"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -1014,7 +1016,7 @@ nvidia,enable-input = <TEGRA_PIN_ENABLE>; nvidia,open-drain = <TEGRA_PIN_ENABLE>; }; - pwr_i2c_sda_pz7 { + pwr-i2c-sda-pz7 { nvidia,pins = "pwr_i2c_sda_pz7"; nvidia,function = "i2cpwr"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -1024,7 +1026,7 @@ }; /* PWR_INT_N */ - pwr_int_n { + pwr-int-n { nvidia,pins = "pwr_int_n"; nvidia,function = "pmi"; nvidia,pull = <TEGRA_PIN_PULL_UP>; @@ -1042,7 +1044,7 @@ }; /* RESET_OUT_N */ - reset_out_n { + reset-out-n { nvidia,pins = "reset_out_n"; nvidia,function = "reset_out_n"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -1051,14 +1053,14 @@ }; /* SHIFT_CTRL_DIR_IN */ - kb_row0_pr0 { + kb-row0-pr0 { nvidia,pins = "kb_row0_pr0"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - kb_row1_pr1 { + kb-row1-pr1 { nvidia,pins = "kb_row1_pr1"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; @@ -1067,7 +1069,7 @@ }; /* Configure level-shifter as output for HDA */ - kb_row11_ps3 { + kb-row11-ps3 { nvidia,pins = "kb_row11_ps3"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_UP>; @@ -1076,21 +1078,21 @@ }; /* SHIFT_CTRL_DIR_OUT */ - kb_col5_pq5 { + kb-col5-pq5 { nvidia,pins = "kb_col5_pq5"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - kb_col6_pq6 { + kb-col6-pq6 { nvidia,pins = "kb_col6_pq6"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - kb_col7_pq7 { + kb-col7-pq7 { nvidia,pins = "kb_col7_pq7"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_UP>; @@ -1099,35 +1101,35 @@ }; /* SHIFT_CTRL_OE */ - kb_col0_pq0 { + kb-col0-pq0 { nvidia,pins = "kb_col0_pq0"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - kb_col1_pq1 { + kb-col1-pq1 { nvidia,pins = "kb_col1_pq1"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - kb_col2_pq2 { + kb-col2-pq2 { nvidia,pins = "kb_col2_pq2"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - kb_col4_pq4 { + kb-col4-pq4 { nvidia,pins = "kb_col4_pq4"; nvidia,function = "kbc"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - kb_row2_pr2 { + kb-row2-pr2 { nvidia,pins = "kb_row2_pr2"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; @@ -1145,7 +1147,7 @@ }; /* TOUCH_INT */ - gpio_w3_aud_pw3 { + gpio-w3-aud-pw3 { nvidia,pins = "gpio_w3_aud_pw3"; nvidia,function = "spi6"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -1286,189 +1288,189 @@ nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - dap1_fs_pn0 { /* NC */ + dap1-fs-pn0 { /* NC */ nvidia,pins = "dap1_fs_pn0"; nvidia,function = "rsvd4"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - dap1_din_pn1 { /* NC */ + dap1-din-pn1 { /* NC */ nvidia,pins = "dap1_din_pn1"; nvidia,function = "rsvd4"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - dap1_sclk_pn3 { /* NC */ + dap1-sclk-pn3 { /* NC */ nvidia,pins = "dap1_sclk_pn3"; nvidia,function = "rsvd4"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - ulpi_data7_po0 { /* NC */ + ulpi-data7-po0 { /* NC */ nvidia,pins = "ulpi_data7_po0"; nvidia,function = "ulpi"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - ulpi_data0_po1 { /* NC */ + ulpi-data0-po1 { /* NC */ nvidia,pins = "ulpi_data0_po1"; nvidia,function = "ulpi"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - ulpi_data1_po2 { /* NC */ + ulpi-data1-po2 { /* NC */ nvidia,pins = "ulpi_data1_po2"; nvidia,function = "ulpi"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - ulpi_data2_po3 { /* NC */ + ulpi-data2-po3 { /* NC */ nvidia,pins = "ulpi_data2_po3"; nvidia,function = "ulpi"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - ulpi_data3_po4 { /* NC */ + ulpi-data3-po4 { /* NC */ nvidia,pins = "ulpi_data3_po4"; nvidia,function = "ulpi"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - ulpi_data6_po7 { /* NC */ + ulpi-data6-po7 { /* NC */ nvidia,pins = "ulpi_data6_po7"; nvidia,function = "ulpi"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - dap4_fs_pp4 { /* NC */ + dap4-fs-pp4 { /* NC */ nvidia,pins = "dap4_fs_pp4"; nvidia,function = "rsvd4"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - dap4_din_pp5 { /* NC */ + dap4-din-pp5 { /* NC */ nvidia,pins = "dap4_din_pp5"; nvidia,function = "rsvd3"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - dap4_dout_pp6 { /* NC */ + dap4-dout-pp6 { /* NC */ nvidia,pins = "dap4_dout_pp6"; nvidia,function = "rsvd4"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - dap4_sclk_pp7 { /* NC */ + dap4-sclk-pp7 { /* NC */ nvidia,pins = "dap4_sclk_pp7"; nvidia,function = "rsvd3"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - kb_col3_pq3 { /* NC */ + kb-col3-pq3 { /* NC */ nvidia,pins = "kb_col3_pq3"; nvidia,function = "kbc"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - kb_row3_pr3 { /* NC */ + kb-row3-pr3 { /* NC */ nvidia,pins = "kb_row3_pr3"; nvidia,function = "kbc"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - kb_row4_pr4 { /* NC */ + kb-row4-pr4 { /* NC */ nvidia,pins = "kb_row4_pr4"; nvidia,function = "rsvd3"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - kb_row5_pr5 { /* NC */ + kb-row5-pr5 { /* NC */ nvidia,pins = "kb_row5_pr5"; nvidia,function = "rsvd3"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - kb_row6_pr6 { /* NC */ + kb-row6-pr6 { /* NC */ nvidia,pins = "kb_row6_pr6"; nvidia,function = "kbc"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - kb_row7_pr7 { /* NC */ + kb-row7-pr7 { /* NC */ nvidia,pins = "kb_row7_pr7"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - kb_row8_ps0 { /* NC */ + kb-row8-ps0 { /* NC */ nvidia,pins = "kb_row8_ps0"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - kb_row9_ps1 { /* NC */ + kb-row9-ps1 { /* NC */ nvidia,pins = "kb_row9_ps1"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - kb_row12_ps4 { /* NC */ + kb-row12-ps4 { /* NC */ nvidia,pins = "kb_row12_ps4"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - kb_row13_ps5 { /* NC */ + kb-row13-ps5 { /* NC */ nvidia,pins = "kb_row13_ps5"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - kb_row14_ps6 { /* NC */ + kb-row14-ps6 { /* NC */ nvidia,pins = "kb_row14_ps6"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - kb_row15_ps7 { /* NC */ + kb-row15-ps7 { /* NC */ nvidia,pins = "kb_row15_ps7"; nvidia,function = "rsvd3"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - kb_row16_pt0 { /* NC */ + kb-row16-pt0 { /* NC */ nvidia,pins = "kb_row16_pt0"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - kb_row17_pt1 { /* NC */ + kb-row17-pt1 { /* NC */ nvidia,pins = "kb_row17_pt1"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; @@ -1496,14 +1498,14 @@ nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - gpio_x1_aud_px1 { /* NC */ + gpio-x1-aud-px1 { /* NC */ nvidia,pins = "gpio_x1_aud_px1"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - gpio_x3_aud_px3 { /* NC */ + gpio-x3-aud-px3 { /* NC */ nvidia,pins = "gpio_x3_aud_px3"; nvidia,function = "rsvd4"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; @@ -1531,14 +1533,14 @@ nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - clk3_req_pee1 { /* NC */ + clk3-req-pee1 { /* NC */ nvidia,pins = "clk3_req_pee1"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - dap_mclk1_req_pee2 { /* NC */ + dap-mclk1-req-pee2 { /* NC */ nvidia,pins = "dap_mclk1_req_pee2"; nvidia,function = "rsvd4"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; @@ -1554,7 +1556,7 @@ * SDMMC_VENDOR_MISC_CNTRL_0 register's SDMMC_SPARE1 * bits being set to 0xfffd according to the TRM! */ - sdmmc3_clk_lb_out_pee4 { /* NC */ + sdmmc3-clk-lb-out-pee4 { /* NC */ nvidia,pins = "sdmmc3_clk_lb_out_pee4"; nvidia,function = "sdmmc3"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -1589,8 +1591,9 @@ sgtl5000: codec@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; - VDDA-supply = <®_3v3>; - VDDIO-supply = <&vddio_1v8>; + VDDA-supply = <®_module_3v3_audio>; + VDDD-supply = <®_1v8_vddio>; + VDDIO-supply = <®_1v8_vddio>; clocks = <&tegra_car TEGRA124_CLK_EXTERN1>; }; @@ -1607,14 +1610,14 @@ pinctrl-0 = <&as3722_default>; as3722_default: pinmux { - gpio2_7 { + gpio2-7 { pins = "gpio2", /* PWR_EN_+V3.3 */ "gpio7"; /* +V1.6_LPO */ function = "gpio"; bias-pull-up; }; - gpio0_1_3_4_5_6 { + gpio0-1-3-4-5-6 { pins = "gpio0", "gpio1", "gpio3", "gpio4", "gpio5", "gpio6"; bias-high-impedance; @@ -1622,18 +1625,18 @@ }; regulators { - vsup-sd2-supply = <®_3v3>; - vsup-sd3-supply = <®_3v3>; - vsup-sd4-supply = <®_3v3>; - vsup-sd5-supply = <®_3v3>; - vin-ldo0-supply = <&vddio_ddr_1v35>; - vin-ldo1-6-supply = <®_3v3>; - vin-ldo2-5-7-supply = <&vddio_1v8>; - vin-ldo3-4-supply = <®_3v3>; - vin-ldo9-10-supply = <®_3v3>; - vin-ldo11-supply = <®_3v3>; - - vdd_cpu: sd0 { + vsup-sd2-supply = <®_module_3v3>; + vsup-sd3-supply = <®_module_3v3>; + vsup-sd4-supply = <®_module_3v3>; + vsup-sd5-supply = <®_module_3v3>; + vin-ldo0-supply = <®_1v35_vddio_ddr>; + vin-ldo1-6-supply = <®_module_3v3>; + vin-ldo2-5-7-supply = <®_1v8_vddio>; + vin-ldo3-4-supply = <®_module_3v3>; + vin-ldo9-10-supply = <®_module_3v3>; + vin-ldo11-supply = <®_module_3v3>; + + reg_vdd_cpu: sd0 { regulator-name = "+VDD_CPU_AP"; regulator-min-microvolt = <700000>; regulator-max-microvolt = <1400000>; @@ -1655,7 +1658,7 @@ ams,ext-control = <1>; }; - vddio_ddr_1v35: sd2 { + reg_1v35_vddio_ddr: sd2 { regulator-name = "+V1.35_VDDIO_DDR(sd2)"; regulator-min-microvolt = <1350000>; @@ -1673,13 +1676,13 @@ regulator-boot-on; }; - vdd_1v05: sd4 { + reg_1v05_vdd: sd4 { regulator-name = "+V1.05"; regulator-min-microvolt = <1050000>; regulator-max-microvolt = <1050000>; }; - vddio_1v8: sd5 { + reg_1v8_vddio: sd5 { regulator-name = "+V1.8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -1687,7 +1690,7 @@ regulator-always-on; }; - vdd_gpu: sd6 { + reg_vdd_gpu: sd6 { regulator-name = "+VDD_GPU_AP"; regulator-min-microvolt = <650000>; regulator-max-microvolt = <1200000>; @@ -1697,7 +1700,7 @@ regulator-always-on; }; - avdd_1v05: ldo0 { + reg_1v05_avdd: ldo0 { regulator-name = "+V1.05_AVDD"; regulator-min-microvolt = <1050000>; regulator-max-microvolt = <1050000>; @@ -1772,12 +1775,13 @@ * TMP451 temperature sensor * Note: THERM_N directly connected to AS3722 PMIC THERM */ - temperature-sensor@4c { + temp-sensor@4c { compatible = "ti,tmp451"; reg = <0x4c>; interrupt-parent = <&gpio>; interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>; #thermal-sensor-cells = <1>; + vcc-supply = <®_module_3v3>; }; }; @@ -1809,9 +1813,9 @@ sata@70020000 { phys = <&{/padctl@7009f000/pads/sata/lanes/sata-0}>; phy-names = "sata-0"; - avdd-supply = <&vdd_1v05>; - hvdd-supply = <®_3v3>; - vddio-supply = <&vdd_1v05>; + avdd-supply = <®_1v05_vdd>; + hvdd-supply = <®_module_3v3>; + vddio-supply = <®_1v05_vdd>; }; usb@70090000 { @@ -1822,14 +1826,14 @@ <&{/padctl@7009f000/pads/usb2/lanes/usb2-2}>, <&{/padctl@7009f000/pads/pcie/lanes/pcie-0}>; phy-names = "usb2-0", "usb3-1", "usb2-1", "usb2-2", "usb3-0"; - avddio-pex-supply = <&vdd_1v05>; - avdd-pll-erefe-supply = <&avdd_1v05>; - avdd-pll-utmip-supply = <&vddio_1v8>; - avdd-usb-ss-pll-supply = <&vdd_1v05>; - avdd-usb-supply = <®_3v3>; - dvddio-pex-supply = <&vdd_1v05>; - hvdd-usb-ss-pll-e-supply = <®_3v3>; - hvdd-usb-ss-supply = <®_3v3>; + avddio-pex-supply = <®_1v05_vdd>; + avdd-pll-erefe-supply = <®_1v05_avdd>; + avdd-pll-utmip-supply = <®_1v8_vddio>; + avdd-usb-ss-pll-supply = <®_1v05_vdd>; + avdd-usb-supply = <®_module_3v3>; + dvddio-pex-supply = <®_1v05_vdd>; + hvdd-usb-ss-pll-e-supply = <®_module_3v3>; + hvdd-usb-ss-supply = <®_module_3v3>; }; padctl@7009f000 { @@ -1839,18 +1843,18 @@ lanes { usb2-0 { - nvidia,function = "xusb"; status = "okay"; + nvidia,function = "xusb"; }; usb2-1 { - nvidia,function = "xusb"; status = "okay"; + nvidia,function = "xusb"; }; usb2-2 { - nvidia,function = "xusb"; status = "okay"; + nvidia,function = "xusb"; }; }; }; @@ -1860,28 +1864,28 @@ lanes { pcie-0 { - nvidia,function = "usb3-ss"; status = "okay"; + nvidia,function = "usb3-ss"; }; pcie-1 { - nvidia,function = "usb3-ss"; status = "okay"; + nvidia,function = "usb3-ss"; }; pcie-2 { - nvidia,function = "pcie"; status = "okay"; + nvidia,function = "pcie"; }; pcie-3 { - nvidia,function = "pcie"; status = "okay"; + nvidia,function = "pcie"; }; pcie-4 { - nvidia,function = "pcie"; status = "okay"; + nvidia,function = "pcie"; }; }; }; @@ -1891,8 +1895,8 @@ lanes { sata-0 { - nvidia,function = "sata"; status = "okay"; + nvidia,function = "sata"; }; }; }; @@ -1903,7 +1907,6 @@ usb2-0 { status = "okay"; mode = "otg"; - vbus-supply = <®_usbo1_vbus>; }; @@ -1911,7 +1914,6 @@ usb2-1 { status = "okay"; mode = "host"; - vbus-supply = <®_usbh_vbus>; }; @@ -1919,18 +1921,19 @@ usb2-2 { status = "okay"; mode = "host"; - vbus-supply = <®_usbh_vbus>; }; usb3-0 { - nvidia,usb2-companion = <2>; status = "okay"; + nvidia,usb2-companion = <2>; + vbus-supply = <®_usbh_vbus>; }; usb3-1 { - nvidia,usb2-companion = <0>; status = "okay"; + nvidia,usb2-companion = <0>; + vbus-supply = <®_usbo1_vbus>; }; }; }; @@ -1940,13 +1943,16 @@ status = "okay"; bus-width = <8>; non-removable; + vmmc-supply = <®_module_3v3>; /* VCC */ + vqmmc-supply = <®_1v8_vddio>; /* VCCQ */ + mmc-ddr-1_8v; }; /* CPU DFLL clock */ clock@70110000 { status = "okay"; - vdd-cpu-supply = <&vdd_cpu>; nvidia,i2c-fs-rate = <400000>; + vdd-cpu-supply = <®_vdd_cpu>; }; ahub@70300000 { @@ -1955,22 +1961,15 @@ }; }; - clocks { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - clk32k_in: clock@0 { - compatible = "fixed-clock"; - reg = <0>; - #clock-cells = <0>; - clock-frequency = <32768>; - }; + clk32k_in: osc3 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; }; cpus { cpu@0 { - vdd-cpu-supply = <&vdd_cpu>; + vdd-cpu-supply = <®_vdd_cpu>; }; }; @@ -1980,7 +1979,7 @@ regulator-min-microvolt = <1050000>; regulator-max-microvolt = <1050000>; gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>; - vin-supply = <&vdd_1v05>; + vin-supply = <®_1v05_vdd>; }; reg_3v3_mxm: regulator-3v3-mxm { @@ -1992,7 +1991,15 @@ regulator-boot-on; }; - reg_3v3: regulator-3v3 { + reg_3v3_avdd_hdmi: regulator-3v3-avdd-hdmi { + compatible = "regulator-fixed"; + regulator-name = "+V3.3_AVDD_HDMI"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <®_1v05_vdd>; + }; + + reg_module_3v3: regulator-module-3v3 { compatible = "regulator-fixed"; regulator-name = "+V3.3"; regulator-min-microvolt = <3300000>; @@ -2005,12 +2012,12 @@ vin-supply = <®_3v3_mxm>; }; - reg_3v3_avdd_hdmi: regulator-3v3-avdd-hdmi { + reg_module_3v3_audio: regulator-module-3v3-audio { compatible = "regulator-fixed"; - regulator-name = "+V3.3_AVDD_HDMI"; + regulator-name = "+V3.3_AUDIO_AVDD_S"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - vin-supply = <&vdd_1v05>; + regulator-always-on; }; sound { @@ -2064,7 +2071,7 @@ &gpio { /* I210 Gigabit Ethernet Controller Reset */ - lan_reset_n { + lan-reset-n { gpio-hog; gpios = <TEGRA_GPIO(S, 2) GPIO_ACTIVE_HIGH>; output-high; @@ -2072,7 +2079,7 @@ }; /* Control MXM3 pin 26 Reset Module Output Carrier Input */ - reset_moci_ctrl { + reset-moci-ctrl { gpio-hog; gpios = <TEGRA_GPIO(U, 4) GPIO_ACTIVE_HIGH>; output-high; diff --git a/dts/src/arm/tegra20-colibri-eval-v3.dts b/dts/src/arm/tegra20-colibri-eval-v3.dts new file mode 100644 index 0000000000..3c0f2681fc --- /dev/null +++ b/dts/src/arm/tegra20-colibri-eval-v3.dts @@ -0,0 +1,262 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +/dts-v1/; + +#include <dt-bindings/input/input.h> +#include "tegra20-colibri.dtsi" + +/ { + model = "Toradex Colibri T20 on Colibri Evaluation Board"; + compatible = "toradex,colibri_t20-eval-v3", "toradex,colibri_t20", + "nvidia,tegra20"; + + aliases { + rtc0 = "/i2c@7000c000/rtc@68"; + rtc1 = "/i2c@7000d000/pmic@34"; + rtc2 = "/rtc@7000e000"; + serial0 = &uarta; + serial1 = &uartd; + serial2 = &uartb; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + host1x@50000000 { + dc@54200000 { + rgb { + status = "okay"; + nvidia,panel = <&panel>; + }; + }; + + hdmi@54280000 { + status = "okay"; + hdmi-supply = <®_5v0>; + }; + }; + + pinmux@70000014 { + state_default: pinmux { + bl-on { + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + ddc { + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + hotplug-detect { + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + i2c { + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + lcd { + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + lm1 { + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + mmc { + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + mmccd { + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + pwm-a-b { + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + pwm-c-d { + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + ssp { + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + uart-a { + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + uart-b { + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + uart-c { + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + usbh-pen { + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + }; + }; + + /* Colibri UART-A */ + serial@70006000 { + status = "okay"; + }; + + /* Colibri UART-C */ + serial@70006040 { + status = "okay"; + }; + + /* Colibri UART-B */ + serial@70006300 { + status = "okay"; + }; + + pwm@7000a000 { + status = "okay"; + }; + + /* + * GEN1_I2C: I2C_SDA/SCL on SODIMM pin 194/196 (e.g. RTC on carrier + * board) + */ + i2c@7000c000 { + status = "okay"; + clock-frequency = <400000>; + + /* M41T0M6 real time clock on carrier board */ + rtc@68 { + compatible = "st,m41t0"; + reg = <0x68>; + }; + }; + + /* GEN2_I2C: unused */ + + /* CAM_I2C (I2C3): unused */ + + /* DDC_CLOCK/DATA on X3 pin 15/16 (e.g. display EDID) */ + i2c@7000c400 { + status = "okay"; + }; + + /* EHCI instance 0: USB1_DP/N -> USBC_P/N */ + usb@c5000000 { + status = "okay"; + dr_mode = "otg"; + }; + + usb-phy@c5000000 { + status = "okay"; + vbus-supply = <®_usbc_vbus>; + }; + + /* EHCI instance 2: USB3_DP/N -> USBH_P/N */ + usb@c5008000 { + status = "okay"; + }; + + usb-phy@c5008000 { + status = "okay"; + vbus-supply = <®_usbh_vbus>; + }; + + /* SPI4: Colibri SSP */ + spi@7000da00 { + status = "okay"; + spi-max-frequency = <25000000>; + + can@0 { + compatible = "microchip,mcp2515"; + reg = <0>; + clocks = <&clk16m>; + interrupt-parent = <&gpio>; + /* CAN_INT */ + interrupts = <TEGRA_GPIO(A, 0) IRQ_TYPE_EDGE_FALLING>; + spi-max-frequency = <10000000>; + vdd-supply = <®_3v3>; + xceiver-supply = <®_5v0>; + }; + }; + + /* SD/MMC */ + sdhci@c8000600 { + status = "okay"; + bus-width = <4>; + cd-gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_LOW>; /* MMCD */ + no-1-8-v; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + brightness-levels = <255 128 64 32 16 8 4 0>; + default-brightness-level = <6>; + /* BL_ON */ + enable-gpios = <&gpio TEGRA_GPIO(T, 4) GPIO_ACTIVE_HIGH>; + power-supply = <®_3v3>; + pwms = <&pwm 0 5000000>; /* PWM<A> */ + }; + + clk16m: osc3 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <16000000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + wakeup { + label = "SODIMM pin 45 wakeup"; + gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>; + linux,code = <KEY_WAKEUP>; + debounce-interval = <10>; + wakeup-source; + }; + }; + + panel: panel { + /* + * edt,et057090dhu: EDT 5.7" LCD TFT + * edt,et070080dh6: EDT 7.0" LCD TFT + */ + compatible = "edt,et057090dhu", "simple-panel"; + backlight = <&backlight>; + power-supply = <®_3v3>; + }; + + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3.3V_SW"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_5v0: regulator-5v0 { + compatible = "regulator-fixed"; + regulator-name = "5V_SW"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_usbc_vbus: regulator-usbc-vbus { + compatible = "regulator-fixed"; + regulator-name = "VCC_USB5"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <®_5v0>; + }; + + /* USBH_PEN resp. USB_P_EN */ + reg_usbh_vbus: regulator-usbh-vbus { + compatible = "regulator-fixed"; + regulator-name = "VCC_USB[1-4]"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>; + vin-supply = <®_5v0>; + }; +}; diff --git a/dts/src/arm/tegra20-colibri-iris.dts b/dts/src/arm/tegra20-colibri-iris.dts index 57f16c0e99..d8004d68ef 100644 --- a/dts/src/arm/tegra20-colibri-iris.dts +++ b/dts/src/arm/tegra20-colibri-iris.dts @@ -1,15 +1,21 @@ // SPDX-License-Identifier: GPL-2.0 /dts-v1/; +#include <dt-bindings/input/input.h> #include "tegra20-colibri.dtsi" / { - model = "Toradex Colibri T20 256/512 MB on Iris"; - compatible = "toradex,iris", "toradex,colibri_t20-512", "nvidia,tegra20"; + model = "Toradex Colibri T20 on Iris"; + compatible = "toradex,colibri_t20-iris", "toradex,colibri_t20", + "nvidia,tegra20"; aliases { + rtc0 = "/i2c@7000c000/rtc@68"; + rtc1 = "/i2c@7000d000/pmic@34"; + rtc2 = "/rtc@7000e000"; serial0 = &uarta; serial1 = &uartd; + serial2 = &uartb; }; chosen { @@ -17,90 +23,222 @@ }; host1x@50000000 { + dc@54200000 { + rgb { + status = "okay"; + nvidia,panel = <&panel>; + }; + }; + hdmi@54280000 { status = "okay"; + hdmi-supply = <®_5v0>; }; }; pinmux@70000014 { state_default: pinmux { - hdint { + bl-on { + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + ddc { + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + hotplug-detect { + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + i2c { + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + lcd { + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + lm1 { + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + mmc { + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + mmccd { + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + pwm-a-b { + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + pwm-c-d { + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + ssp { nvidia,tristate = <TEGRA_PIN_DISABLE>; }; - i2cddc { + uart-a { nvidia,tristate = <TEGRA_PIN_DISABLE>; }; - sdio4 { + uart-b { nvidia,tristate = <TEGRA_PIN_DISABLE>; }; - uarta { + uart-c { nvidia,tristate = <TEGRA_PIN_DISABLE>; }; - uartd { + usbh-pen { nvidia,tristate = <TEGRA_PIN_DISABLE>; }; }; }; + /* Colibri UART-A */ serial@70006000 { status = "okay"; }; + /* Colibri UART-C */ + serial@70006040 { + status = "okay"; + }; + + /* Colibri UART-B */ serial@70006300 { status = "okay"; }; - i2c_ddc: i2c@7000c400 { + pwm@7000a000 { + status = "okay"; + }; + + /* + * GEN1_I2C: I2C_SDA/SCL on SODIMM pin 194/196 (e.g. RTC on carrier + * board) + */ + i2c@7000c000 { + status = "okay"; + clock-frequency = <400000>; + + /* M41T0M6 real time clock on carrier board */ + rtc@68 { + compatible = "st,m41t0"; + reg = <0x68>; + }; + }; + + /* GEN2_I2C: unused */ + + /* CAM_I2C (I2C3): unused */ + + /* DDC_CLOCK/DATA on X3 pin 15/16 (e.g. display EDID) */ + i2c@7000c400 { status = "okay"; }; + /* EHCI instance 0: USB1_DP/N -> USBC_P/N */ usb@c5000000 { status = "okay"; + dr_mode = "otg"; }; usb-phy@c5000000 { status = "okay"; + vbus-supply = <®_usbc_vbus>; }; + /* EHCI instance 2: USB3_DP/N -> USBH_P/N */ usb@c5008000 { status = "okay"; }; usb-phy@c5008000 { status = "okay"; + vbus-supply = <®_usbh_vbus>; + }; + + /* SPI4: Colibri SSP */ + spi@7000da00 { + status = "okay"; + spi-max-frequency = <25000000>; }; + /* SD/MMC */ sdhci@c8000600 { status = "okay"; bus-width = <4>; - vmmc-supply = <&vcc_sd_reg>; - vqmmc-supply = <&vcc_sd_reg>; - }; - - regulators { - regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "usb_host_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-boot-on; - regulator-always-on; - gpio = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_HIGH>; - }; + cd-gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_LOW>; /* MMCD */ + no-1-8-v; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + brightness-levels = <255 128 64 32 16 8 4 0>; + default-brightness-level = <6>; + /* BL_ON */ + enable-gpios = <&gpio TEGRA_GPIO(T, 4) GPIO_ACTIVE_HIGH>; + power-supply = <®_3v3>; + pwms = <&pwm 0 5000000>; /* PWM<A> */ + }; + + gpio-keys { + compatible = "gpio-keys"; - vcc_sd_reg: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "vcc_sd"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; + wakeup { + label = "SODIMM pin 45 wakeup"; + gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>; + linux,code = <KEY_WAKEUP>; + debounce-interval = <10>; + wakeup-source; }; }; + + panel: panel { + /* + * edt,et057090dhu: EDT 5.7" LCD TFT + * edt,et070080dh6: EDT 7.0" LCD TFT + */ + compatible = "edt,et057090dhu", "simple-panel"; + backlight = <&backlight>; + power-supply = <®_3v3>; + }; + + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_5v0: regulator-5v0 { + compatible = "regulator-fixed"; + regulator-name = "5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_usbc_vbus: regulator-usbc-vbus { + compatible = "regulator-fixed"; + regulator-name = "VCC_USB2"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <®_5v0>; + }; + + /* USBH_PEN resp. USB_P_EN */ + reg_usbh_vbus: regulator-usbh-vbus { + compatible = "regulator-fixed"; + regulator-name = "VCC_USB1"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>; + vin-supply = <®_5v0>; + }; }; diff --git a/dts/src/arm/tegra20-colibri.dtsi b/dts/src/arm/tegra20-colibri.dtsi index e7b9ab0990..6162d193e1 100644 --- a/dts/src/arm/tegra20-colibri.dtsi +++ b/dts/src/arm/tegra20-colibri.dtsi @@ -1,15 +1,13 @@ // SPDX-License-Identifier: GPL-2.0 #include "tegra20.dtsi" +/* + * Toradex Colibri T20 Module Device Tree + * Compatible for Revisions Colibri T20 256MB V1.1B, V1.2A; + * Colibri T20 256MB IT V1.2A; Colibri T20 512MB V1.1C, V1.2A; + * Colibri T20 512MB IT V1.2A + */ / { - model = "Toradex Colibri T20 256/512 MB"; - compatible = "toradex,colibri_t20-512", "nvidia,tegra20"; - - aliases { - rtc0 = "/i2c@7000d000/tps6586x@34"; - rtc1 = "/rtc@7000e000"; - }; - memory@0 { /* * Set memory to 256 MB to be safe as this could be used on @@ -21,12 +19,11 @@ host1x@50000000 { hdmi@54280000 { - vdd-supply = <&hdmi_vdd_reg>; - pll-supply = <&hdmi_pll_reg>; - - nvidia,ddc-i2c-bus = <&i2c_ddc>; - nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7) - GPIO_ACTIVE_HIGH>; + nvidia,ddc-i2c-bus = <&hdmi_ddc>; + nvidia,hpd-gpio = + <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>; + pll-supply = <®_1v8_avdd_hdmi_pll>; + vdd-supply = <®_3v3_avdd_hdmi>; }; }; @@ -35,187 +32,406 @@ pinctrl-0 = <&state_default>; state_default: pinmux { - audio_refclk { + /* Analogue Audio AC97 to WM9712 (On-module) */ + audio-refclk { nvidia,pins = "cdev1"; nvidia,function = "plla_out"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; }; - crt { - nvidia,pins = "crtp"; - nvidia,function = "crt"; - nvidia,pull = <TEGRA_PIN_PULL_NONE>; - nvidia,tristate = <TEGRA_PIN_ENABLE>; - }; dap3 { nvidia,pins = "dap3"; nvidia,function = "dap3"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; }; - displaya { - nvidia,pins = "ld0", "ld1", "ld2", "ld3", - "ld4", "ld5", "ld6", "ld7", "ld8", - "ld9", "ld10", "ld11", "ld12", "ld13", - "ld14", "ld15", "ld16", "ld17", - "lhs", "lpw0", "lpw2", "lsc0", - "lsc1", "lsck", "lsda", "lspi", "lvs"; - nvidia,function = "displaya"; - nvidia,tristate = <TEGRA_PIN_ENABLE>; - }; - gpio_dte { - nvidia,pins = "dte"; - nvidia,function = "rsvd1"; - nvidia,pull = <TEGRA_PIN_PULL_NONE>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; - }; - gpio_gmi { - nvidia,pins = "ata", "atc", "atd", "ate", - "dap1", "dap2", "dap4", "gpu", "irrx", - "irtx", "spia", "spib", "spic"; - nvidia,function = "gmi"; + + /* + * AC97_RESET, ULPI_RESET, AC97_INT aka WM9712 GENIRQ + * (All on-module), SODIMM Pin 45 Wakeup + */ + gpio-uac { + nvidia,pins = "uac"; + nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; }; - gpio_pta { + + /* + * Buffer Enables for nPWE and RDnWR (On-module, + * see GPIO hogging further down below) + */ + gpio-pta { nvidia,pins = "pta"; nvidia,function = "rsvd4"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; }; - gpio_uac { - nvidia,pins = "uac"; - nvidia,function = "rsvd2"; - nvidia,pull = <TEGRA_PIN_PULL_NONE>; + + /* + * CLK_32K_OUT, CORE_PWR_REQ, CPU_PWR_REQ, PWR_INT_N, + * SYS_CLK_REQ (All on-module) + */ + pmc { + nvidia,pins = "pmc"; + nvidia,function = "pwr_on"; nvidia,tristate = <TEGRA_PIN_DISABLE>; }; - hdint { - nvidia,pins = "hdint"; + + /* + * Colibri Address/Data Bus (GMI) + * Note: spid and spie optionally used for SPI1 + */ + gmi { + nvidia,pins = "atc", "atd", "ate", "dap1", + "dap2", "dap4", "gmd", "gpu", + "irrx", "irtx", "spia", "spib", + "spic", "spid", "spie", "uca", + "ucb"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + }; + /* Further pins may be used as GPIOs */ + gmi-gpio1 { + nvidia,pins = "lpw0", "lsc1", "lsck", "lsda"; nvidia,function = "hdmi"; nvidia,tristate = <TEGRA_PIN_ENABLE>; }; - i2c1 { - nvidia,pins = "rm"; - nvidia,function = "i2c1"; - nvidia,pull = <TEGRA_PIN_PULL_NONE>; + gmi-gpio2 { + nvidia,pins = "lcsn", "ldc", "lm0", "lsdi"; + nvidia,function = "rsvd4"; nvidia,tristate = <TEGRA_PIN_ENABLE>; }; - i2c3 { - nvidia,pins = "dtf"; - nvidia,function = "i2c3"; + + /* Colibri BL_ON */ + bl-on { + nvidia,pins = "dta"; + nvidia,function = "rsvd1"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_ENABLE>; }; - i2cddc { + + /* Colibri Backlight PWM<A>, PWM<B> */ + pwm-a-b { + nvidia,pins = "sdc"; + nvidia,function = "pwm"; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + }; + + /* Colibri DDC */ + ddc { nvidia,pins = "ddc"; nvidia,function = "i2c2"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_ENABLE>; }; - i2cp { - nvidia,pins = "i2cp"; - nvidia,function = "i2cp"; + + /* + * Colibri EXT_IO* + * Note: dtf optionally used for I2C3 + */ + ext-io { + nvidia,pins = "dtf", "spdi"; + nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; }; - irda { - nvidia,pins = "uad"; - nvidia,function = "irda"; + + /* + * Colibri Ethernet (On-module) + * ULPI EHCI instance 1 USB2_DP/N -> AX88772B + */ + ulpi { + nvidia,pins = "uaa", "uab", "uda"; + nvidia,function = "ulpi"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; - nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; - nand { - nvidia,pins = "kbca", "kbcc", "kbcd", - "kbce", "kbcf"; - nvidia,function = "nand"; + ulpi-refclk { + nvidia,pins = "cdev2"; + nvidia,function = "pllp_out4"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; }; - owc { - nvidia,pins = "owc"; - nvidia,function = "owr"; + + /* Colibri HOTPLUG_DETECT (HDMI) */ + hotplug-detect { + nvidia,pins = "hdint"; + nvidia,function = "hdmi"; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + }; + + /* Colibri I2C */ + i2c { + nvidia,pins = "rm"; + nvidia,function = "i2c1"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_ENABLE>; }; - pmc { - nvidia,pins = "pmc"; - nvidia,function = "pwr_on"; - nvidia,tristate = <TEGRA_PIN_DISABLE>; + + /* + * Colibri L_BIAS, LCD_M1 is muxed with LCD_DE + * today's display need DE, disable LCD_M1 + */ + lm1 { + nvidia,pins = "lm1"; + nvidia,function = "rsvd3"; + nvidia,tristate = <TEGRA_PIN_ENABLE>; }; - pwm { - nvidia,pins = "sdb", "sdc", "sdd"; - nvidia,function = "pwm"; + + /* Colibri LCD (L_* resp. LDD<*>) */ + lcd { + nvidia,pins = "ld0", "ld1", "ld2", "ld3", + "ld4", "ld5", "ld6", "ld7", + "ld8", "ld9", "ld10", "ld11", + "ld12", "ld13", "ld14", "ld15", + "ld16", "ld17", "lhs", "lsc0", + "lspi", "lvs"; + nvidia,function = "displaya"; nvidia,tristate = <TEGRA_PIN_ENABLE>; }; - sdio4 { - nvidia,pins = "atb", "gma", "gme"; + /* Colibri LCD (Optional 24 BPP Support) */ + lcd-24 { + nvidia,pins = "ldi", "lhp0", "lhp1", "lhp2", + "lpp", "lvp1"; + nvidia,function = "displaya"; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + }; + + /* Colibri MMC */ + mmc { + nvidia,pins = "atb", "gma"; nvidia,function = "sdio4"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_ENABLE>; }; - spi1 { - nvidia,pins = "spid", "spie", "spif"; - nvidia,function = "spi1"; + + /* Colibri MMCCD */ + mmccd { + nvidia,pins = "gmb"; + nvidia,function = "gmi_int"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_ENABLE>; }; - spi4 { + + /* Colibri MMC (Optional 8-bit) */ + mmc-8bit { + nvidia,pins = "gme"; + nvidia,function = "sdio4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + }; + + /* + * Colibri Parallel Camera (Optional) + * pins multiplexed with others and therefore disabled + * Note: dta used for BL_ON by default + */ + cif-mclk { + nvidia,pins = "csus"; + nvidia,function = "vi_sensor_clk"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + }; + cif { + nvidia,pins = "dtb", "dtc", "dtd"; + nvidia,function = "vi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + }; + + /* Colibri PWM<C>, PWM<D> */ + pwm-c-d { + nvidia,pins = "sdb", "sdd"; + nvidia,function = "pwm"; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + }; + + /* Colibri SSP */ + ssp { nvidia,pins = "slxa", "slxc", "slxd", "slxk"; nvidia,function = "spi4"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_ENABLE>; }; - uarta { + + /* Colibri UART-A */ + uart-a { nvidia,pins = "sdio1"; nvidia,function = "uarta"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_ENABLE>; }; - uartd { + uart-a-dsr { + nvidia,pins = "lpw1"; + nvidia,function = "rsvd3"; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + }; + uart-a-dcd { + nvidia,pins = "lpw2"; + nvidia,function = "hdmi"; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + }; + + /* Colibri UART-B */ + uart-b { nvidia,pins = "gmc"; nvidia,function = "uartd"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_ENABLE>; }; - ulpi { - nvidia,pins = "uaa", "uab", "uda"; - nvidia,function = "ulpi"; + + /* Colibri UART-C */ + uart-c { + nvidia,pins = "uad"; + nvidia,function = "irda"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + }; + + /* Colibri USB_CDET */ + usb-cdet { + nvidia,pins = "spdo"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + }; + + /* Colibri USBH_OC */ + usbh-oc { + nvidia,pins = "spih"; + nvidia,function = "spi2_alt"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + }; + + /* Colibri USBH_PEN */ + usbh-pen { + nvidia,pins = "spig"; + nvidia,function = "spi2_alt"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + }; + + /* Colibri VGA not supported */ + vga { + nvidia,pins = "crtp"; + nvidia,function = "crt"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + }; + + /* I2C3 (Optional) */ + i2c3 { + nvidia,pins = "dtf"; + nvidia,function = "i2c3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + }; + + /* JTAG_RTCK */ + jtag-rtck { + nvidia,pins = "gpu7"; + nvidia,function = "rtck"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + }; + + /* + * LAN_RESET, LAN_EXT_WAKEUP and LAN_PME + * (All On-module) + */ + gpio-gpv { + nvidia,pins = "gpv"; + nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; }; - ulpi_refclk { - nvidia,pins = "cdev2"; - nvidia,function = "pllp_out4"; + + /* + * LAN_V_BUS, VDD_FAULT, BATT_FAULT, WM9712 PENDOWN + * (All On-module); Colibri CAN_INT + */ + gpio-dte { + nvidia,pins = "dte"; + nvidia,function = "rsvd1"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; }; - usb_gpio { - nvidia,pins = "spig", "spih"; - nvidia,function = "spi2_alt"; + + /* NAND (On-module) */ + nand { + nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd", + "kbce", "kbcf"; + nvidia,function = "nand"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; }; - vi { - nvidia,pins = "dta", "dtb", "dtc", "dtd"; - nvidia,function = "vi"; + + /* Onewire (Optional) */ + owr { + nvidia,pins = "owc"; + nvidia,function = "owr"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_ENABLE>; }; - vi_sc { - nvidia,pins = "csus"; - nvidia,function = "vi_sensor_clk"; + + /* Power I2C (On-module) */ + i2cp { + nvidia,pins = "i2cp"; + nvidia,function = "i2cp"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + /* RESET_OUT */ + reset-out { + nvidia,pins = "ata"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + /* + * SPI1 (Optional) + * Note: spid and spie used for Colibri Address/Data + * Bus (GMI) + */ + spi1 { + nvidia,pins = "spid", "spie", "spif"; + nvidia,function = "spi1"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_ENABLE>; }; + + /* + * THERMD_ALERT# (On-module), unlatched I2C address pin + * of LM95245 temperature sensor therefore requires + * disabling for now + */ + lvp0 { + nvidia,pins = "lvp0"; + nvidia,function = "rsvd3"; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + }; }; }; - ac97: ac97@70002000 { + tegra_ac97: ac97@70002000 { status = "okay"; - nvidia,codec-reset-gpio = <&gpio TEGRA_GPIO(V, 0) - GPIO_ACTIVE_HIGH>; - nvidia,codec-sync-gpio = <&gpio TEGRA_GPIO(P, 0) - GPIO_ACTIVE_HIGH>; + nvidia,codec-reset-gpio = + <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_HIGH>; + nvidia,codec-sync-gpio = + <&gpio TEGRA_GPIO(P, 0) GPIO_ACTIVE_HIGH>; + }; + + serial@70006040 { + compatible = "nvidia,tegra20-hsuart"; + }; + + serial@70006300 { + compatible = "nvidia,tegra20-hsuart"; }; nand-controller@70008000 { @@ -243,7 +459,7 @@ }; /* DDC_SCL/SDA on X3 pin 15/16 (e.g. display EDID) */ - i2c_ddc: i2c@7000c400 { + hdmi_ddc: i2c@7000c400 { clock-frequency = <10000>; }; @@ -256,59 +472,45 @@ status = "okay"; clock-frequency = <100000>; - pmic: tps6586x@34 { + pmic@34 { compatible = "ti,tps6586x"; reg = <0x34>; interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; - ti,system-power-controller; - #gpio-cells = <2>; gpio-controller; - - sys-supply = <&vdd_3v3_reg>; - vin-sm0-supply = <&sys_reg>; - vin-sm1-supply = <&sys_reg>; - vin-sm2-supply = <&sys_reg>; - vinldo01-supply = <&sm2_reg>; - vinldo23-supply = <&vdd_3v3_reg>; - vinldo4-supply = <&vdd_3v3_reg>; - vinldo678-supply = <&vdd_3v3_reg>; - vinldo9-supply = <&vdd_3v3_reg>; + sys-supply = <®_module_3v3>; + vin-sm0-supply = <®_3v3_vsys>; + vin-sm1-supply = <®_3v3_vsys>; + vin-sm2-supply = <®_3v3_vsys>; + vinldo01-supply = <®_1v8_vdd_ddr2>; + vinldo23-supply = <®_module_3v3>; + vinldo4-supply = <®_module_3v3>; + vinldo678-supply = <®_module_3v3>; + vinldo9-supply = <®_module_3v3>; regulators { - #address-cells = <1>; - #size-cells = <0>; - - sys_reg: regulator@0 { - reg = <0>; - regulator-compatible = "sys"; - regulator-name = "vdd_sys"; + reg_3v3_vsys: sys { + regulator-name = "VSYS_3.3V"; regulator-always-on; }; - regulator@1 { - reg = <1>; - regulator-compatible = "sm0"; - regulator-name = "vdd_sm0,vdd_core"; + sm0 { + regulator-name = "VDD_CORE_1.2V"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-always-on; }; - regulator@2 { - reg = <2>; - regulator-compatible = "sm1"; - regulator-name = "vdd_sm1,vdd_cpu"; + sm1 { + regulator-name = "VDD_CPU_1.0V"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-always-on; }; - sm2_reg: regulator@3 { - reg = <3>; - regulator-compatible = "sm2"; - regulator-name = "vdd_sm2,vin_ldo*"; + reg_1v8_vdd_ddr2: sm2 { + regulator-name = "VDD_DDR2_1.8V"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; @@ -316,80 +518,68 @@ /* LDO0 is not connected to anything */ - regulator@5 { - reg = <5>; - regulator-compatible = "ldo1"; - regulator-name = "vdd_ldo1,avdd_pll*"; + /* + * +3.3V_ENABLE_N switching via FET: + * AVDD_AUDIO_S and +3.3V + * see also +3.3V fixed supply + */ + ldo1 { + regulator-name = "AVDD_PLL_1.1V"; regulator-min-microvolt = <1100000>; regulator-max-microvolt = <1100000>; regulator-always-on; }; - regulator@6 { - reg = <6>; - regulator-compatible = "ldo2"; - regulator-name = "vdd_ldo2,vdd_rtc"; + ldo2 { + regulator-name = "VDD_RTC_1.2V"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; }; /* LDO3 is not connected to anything */ - regulator@8 { - reg = <8>; - regulator-compatible = "ldo4"; - regulator-name = "vdd_ldo4,avdd_osc,vddio_sys"; + ldo4 { + regulator-name = "VDDIO_SYS_1.8V"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; }; - ldo5_reg: regulator@9 { - reg = <9>; - regulator-compatible = "ldo5"; - regulator-name = "vdd_ldo5,vdd_fuse"; + /* Switched via FET from regular +3.3V */ + ldo5 { + regulator-name = "+3.3V_USB"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; - regulator@10 { - reg = <10>; - regulator-compatible = "ldo6"; - regulator-name = "vdd_ldo6,avdd_vdac,vddio_vi,vddio_cam"; + ldo6 { + regulator-name = "AVDD_VDAC_2.85V"; regulator-min-microvolt = <2850000>; regulator-max-microvolt = <2850000>; }; - hdmi_vdd_reg: regulator@11 { - reg = <11>; - regulator-compatible = "ldo7"; - regulator-name = "vdd_ldo7,avdd_hdmi"; + reg_3v3_avdd_hdmi: ldo7 { + regulator-name = "AVDD_HDMI_3.3V"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; - hdmi_pll_reg: regulator@12 { - reg = <12>; - regulator-compatible = "ldo8"; - regulator-name = "vdd_ldo8,avdd_hdmi_pll"; + reg_1v8_avdd_hdmi_pll: ldo8 { + regulator-name = "AVDD_HDMI_PLL_1.8V"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - regulator@13 { - reg = <13>; - regulator-compatible = "ldo9"; - regulator-name = "vdd_ldo9,avdd_2v85,vdd_ddr_rx"; + ldo9 { + regulator-name = "VDDIO_RX_DDR_2.85V"; regulator-min-microvolt = <2850000>; regulator-max-microvolt = <2850000>; regulator-always-on; }; - regulator@14 { - reg = <14>; - regulator-compatible = "ldo_rtc"; - regulator-name = "vdd_rtc_out,vdd_cell"; + ldo_rtc { + regulator-name = "VCC_BATT"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; @@ -397,7 +587,8 @@ }; }; - temperature-sensor@4c { + /* LM95245 temperature sensor */ + temp-sensor@4c { compatible = "national,lm95245"; reg = <0x4c>; }; @@ -410,6 +601,14 @@ nvidia,core-pwr-good-time = <3845 3845>; nvidia,core-pwr-off-time = <3875>; nvidia,sys-clock-req-active-high; + + /* Set SLEEP MODE bit in SUPPLYENE register of TPS658643 PMIC */ + i2c-thermtrip { + nvidia,i2c-controller-id = <3>; + nvidia,bus-addr = <0x34>; + nvidia,reg-addr = <0x14>; + nvidia,reg-data = <0x8>; + }; }; memory-controller@7000f400 { @@ -483,79 +682,87 @@ }; }; + /* EHCI instance 1: ULPI PHY -> AX88772B (On-module) */ usb@c5004000 { status = "okay"; - nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1) - GPIO_ACTIVE_LOW>; + #address-cells = <1>; + #size-cells = <0>; + + asix@1 { + reg = <1>; + local-mac-address = [00 00 00 00 00 00]; + }; }; usb-phy@c5004000 { status = "okay"; - nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1) - GPIO_ACTIVE_LOW>; + nvidia,phy-reset-gpio = + <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_LOW>; + vbus-supply = <®_lan_v_bus>; }; - sdhci@c8000600 { - cd-gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_LOW>; + clk32k_in: xtal3 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; }; - clocks { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - clk32k_in: clock@0 { - compatible = "fixed-clock"; - reg = <0>; - #clock-cells = <0>; - clock-frequency = <32768>; - }; + reg_lan_v_bus: regulator-lan-v-bus { + compatible = "regulator-fixed"; + regulator-name = "LAN_V_BUS"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&gpio TEGRA_GPIO(BB, 1) GPIO_ACTIVE_HIGH>; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - vdd_3v3_reg: regulator@100 { - compatible = "regulator-fixed"; - reg = <100>; - regulator-name = "vdd_3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - regulator@101 { - compatible = "regulator-fixed"; - reg = <101>; - regulator-name = "internal_usb"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - regulator-boot-on; - regulator-always-on; - gpio = <&gpio TEGRA_GPIO(BB, 1) GPIO_ACTIVE_HIGH>; - }; + reg_module_3v3: regulator-module-3v3 { + compatible = "regulator-fixed"; + regulator-name = "+V3.3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; }; sound { compatible = "nvidia,tegra-audio-wm9712-colibri_t20", - "nvidia,tegra-audio-wm9712"; - nvidia,model = "Colibri T20 AC97 Audio"; - + "nvidia,tegra-audio-wm9712"; + nvidia,model = "Toradex Colibri T20"; nvidia,audio-routing = "Headphone", "HPOUTL", "Headphone", "HPOUTR", "LineIn", "LINEINL", "LineIn", "LINEINR", "Mic", "MIC1"; - - nvidia,ac97-controller = <&ac97>; - + nvidia,ac97-controller = <&tegra_ac97>; clocks = <&tegra_car TEGRA20_CLK_PLL_A>, <&tegra_car TEGRA20_CLK_PLL_A_OUT0>, <&tegra_car TEGRA20_CLK_CDEV1>; clock-names = "pll_a", "pll_a_out0", "mclk"; }; }; + +&gpio { + lan-reset-n { + gpio-hog; + gpios = <TEGRA_GPIO(V, 4) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "LAN_RESET#"; + }; + + /* Tri-stating GMI_WR_N on SODIMM pin 99 nPWE */ + npwe { + gpio-hog; + gpios = <TEGRA_GPIO(T, 5) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "Tri-state nPWE"; + }; + + /* Not tri-stating GMI_WR_N on SODIMM pin 93 RDnWR */ + rdnwr { + gpio-hog; + gpios = <TEGRA_GPIO(T, 6) GPIO_ACTIVE_HIGH>; + output-low; + line-name = "Not tri-state RDnWR"; + }; +}; diff --git a/dts/src/arm/tegra20-paz00.dts b/dts/src/arm/tegra20-paz00.dts index ef24529192..8861e0976e 100644 --- a/dts/src/arm/tegra20-paz00.dts +++ b/dts/src/arm/tegra20-paz00.dts @@ -303,7 +303,7 @@ request-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>; slave-addr = <138>; clocks = <&tegra_car TEGRA20_CLK_I2C3>, - <&tegra_car TEGRA20_CLK_PLL_P_OUT3>; + <&tegra_car TEGRA20_CLK_PLL_P_OUT3>; clock-names = "div-clk", "fast-clk"; resets = <&tegra_car 67>; reset-names = "i2c"; @@ -524,10 +524,10 @@ gpio-keys { compatible = "gpio-keys"; - power { - label = "Power"; + wakeup { + label = "Wakeup"; gpios = <&gpio TEGRA_GPIO(J, 7) GPIO_ACTIVE_LOW>; - linux,code = <KEY_POWER>; + linux,code = <KEY_WAKEUP>; wakeup-source; }; }; @@ -599,8 +599,8 @@ GPIO_ACTIVE_HIGH>; clocks = <&tegra_car TEGRA20_CLK_PLL_A>, - <&tegra_car TEGRA20_CLK_PLL_A_OUT0>, - <&tegra_car TEGRA20_CLK_CDEV1>; + <&tegra_car TEGRA20_CLK_PLL_A_OUT0>, + <&tegra_car TEGRA20_CLK_CDEV1>; clock-names = "pll_a", "pll_a_out0", "mclk"; }; }; diff --git a/dts/src/arm/tegra20.dtsi b/dts/src/arm/tegra20.dtsi index 15b73bd377..20869757d3 100644 --- a/dts/src/arm/tegra20.dtsi +++ b/dts/src/arm/tegra20.dtsi @@ -419,19 +419,6 @@ status = "disabled"; }; - gmi@70009000 { - compatible = "nvidia,tegra20-gmi"; - reg = <0x70009000 0x1000>; - #address-cells = <2>; - #size-cells = <1>; - ranges = <0 0 0xd0000000 0xfffffff>; - clocks = <&tegra_car TEGRA20_CLK_NOR>; - clock-names = "gmi"; - resets = <&tegra_car 42>; - reset-names = "gmi"; - status = "disabled"; - }; - nand-controller@70008000 { compatible = "nvidia,tegra20-nand"; reg = <0x70008000 0x100>; @@ -447,6 +434,19 @@ status = "disabled"; }; + gmi@70009000 { + compatible = "nvidia,tegra20-gmi"; + reg = <0x70009000 0x1000>; + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0xd0000000 0xfffffff>; + clocks = <&tegra_car TEGRA20_CLK_NOR>; + clock-names = "gmi"; + resets = <&tegra_car 42>; + reset-names = "gmi"; + status = "disabled"; + }; + pwm: pwm@7000a000 { compatible = "nvidia,tegra20-pwm"; reg = <0x7000a000 0x100>; @@ -865,5 +865,7 @@ compatible = "arm,cortex-a9-pmu"; interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&{/cpus/cpu@0}>, + <&{/cpus/cpu@1}>; }; }; diff --git a/dts/src/arm/tegra30-apalis-eval.dts b/dts/src/arm/tegra30-apalis-eval.dts index 0dc85a20bd..749fc6d1ff 100644 --- a/dts/src/arm/tegra30-apalis-eval.dts +++ b/dts/src/arm/tegra30-apalis-eval.dts @@ -6,11 +6,12 @@ / { model = "Toradex Apalis T30 on Apalis Evaluation Board"; - compatible = "toradex,apalis_t30-eval", "toradex,apalis_t30", "nvidia,tegra30"; + compatible = "toradex,apalis_t30-eval", "toradex,apalis_t30", + "nvidia,tegra30"; aliases { rtc0 = "/i2c@7000c000/rtc@68"; - rtc1 = "/i2c@7000d000/tps65911@2d"; + rtc1 = "/i2c@7000d000/pmic@2d"; rtc2 = "/rtc@7000e000"; serial0 = &uarta; serial1 = &uartb; @@ -23,8 +24,6 @@ }; pcie@3000 { - status = "okay"; - pci@1,0 { status = "okay"; }; @@ -32,10 +31,6 @@ pci@2,0 { status = "okay"; }; - - pci@3,0 { - status = "okay"; - }; }; host1x@50000000 { @@ -45,27 +40,30 @@ nvidia,panel = <&panel>; }; }; + hdmi@54280000 { status = "okay"; + hdmi-supply = <®_5v0>; }; }; + /* Apalis UART1 */ serial@70006000 { status = "okay"; }; + /* Apalis UART2 */ serial@70006040 { - compatible = "nvidia,tegra30-hsuart"; status = "okay"; }; + /* Apalis UART3 */ serial@70006200 { - compatible = "nvidia,tegra30-hsuart"; status = "okay"; }; + /* Apalis UART4 */ serial@70006300 { - compatible = "nvidia,tegra30-hsuart"; status = "okay"; }; @@ -99,13 +97,13 @@ * CAM_I2C: I2C3_SDA/SCL on MXM3 pin 201/203 (e.g. camera sensor on * carrier board) */ - cami2c: i2c@7000c500 { + i2c@7000c500 { status = "okay"; clock-frequency = <400000>; }; /* DDC: I2C2_SDA/SCL on MXM3 pin 205/207 (e.g. display EDID) */ - hdmiddc: i2c@7000c700 { + i2c@7000c700 { status = "okay"; }; @@ -113,29 +111,16 @@ spi@7000d400 { status = "okay"; spi-max-frequency = <25000000>; - spidev0: spidev@1 { - compatible = "spidev"; - reg = <1>; - spi-max-frequency = <25000000>; - }; }; /* SPI5: Apalis SPI2 */ spi@7000dc00 { status = "okay"; spi-max-frequency = <25000000>; - spidev1: spidev@2 { - compatible = "spidev"; - reg = <2>; - spi-max-frequency = <25000000>; - }; - }; - - hda@70030000 { - status = "okay"; }; - sd1: sdhci@78000000 { + /* Apalis SD1 */ + sdhci@78000000 { status = "okay"; bus-width = <4>; /* SD1_CD# */ @@ -143,7 +128,8 @@ no-1-8-v; }; - mmc1: sdhci@78000400 { + /* Apalis MMC1 */ + sdhci@78000400 { status = "okay"; bus-width = <8>; /* MMC1_CD# */ @@ -154,12 +140,12 @@ /* EHCI instance 0: USB1_DP/N -> USBO1_DP/N */ usb@7d000000 { status = "okay"; + dr_mode = "otg"; }; usb-phy@7d000000 { status = "okay"; - dr_mode = "otg"; - vbus-supply = <&usbo1_vbus_reg>; + vbus-supply = <®_usbo1_vbus>; }; /* EHCI instance 1: USB2_DP/N -> USBH2_DP/N */ @@ -169,7 +155,7 @@ usb-phy@7d004000 { status = "okay"; - vbus-supply = <&usbh_vbus_reg>; + vbus-supply = <®_usbh_vbus>; }; /* EHCI instance 2: USB3_DP/N -> USBH3_DP/N */ @@ -179,18 +165,17 @@ usb-phy@7d008000 { status = "okay"; - vbus-supply = <&usbh_vbus_reg>; + vbus-supply = <®_usbh_vbus>; }; backlight: backlight { compatible = "pwm-backlight"; - - /* PWM_BKL1 */ - pwms = <&pwm 0 5000000>; brightness-levels = <255 231 223 207 191 159 127 0>; default-brightness-level = <6>; /* BKL1_ON */ enable-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>; + power-supply = <®_3v3>; + pwms = <&pwm 0 5000000>; /* BKL1_PWM */ }; gpio-keys { @@ -211,64 +196,53 @@ * edt,et070080dh6: EDT 7.0" LCD TFT */ compatible = "edt,et057090dhu", "simple-panel"; - backlight = <&backlight>; + power-supply = <®_3v3>; }; - pwmleds { - compatible = "pwm-leds"; - - pwm1 { - label = "PWM1"; - pwms = <&pwm 3 19600>; - max-brightness = <255>; - }; - - pwm2 { - label = "PWM2"; - pwms = <&pwm 2 19600>; - max-brightness = <255>; - }; + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3.3V_SW"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; - pwm3 { - label = "PWM3"; - pwms = <&pwm 1 19600>; - max-brightness = <255>; - }; + reg_5v0: regulator-5v0 { + compatible = "regulator-fixed"; + regulator-name = "5V_SW"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; }; - regulators { - sys_5v0_reg: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "5v0"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; + /* USBO1_EN */ + reg_usbo1_vbus: regulator-usbo1-vbus { + compatible = "regulator-fixed"; + regulator-name = "VCC_USBO1"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(T, 5) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <®_5v0>; + }; - /* USBO1_EN */ - usbo1_vbus_reg: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "usbo1_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio TEGRA_GPIO(T, 5) GPIO_ACTIVE_HIGH>; - enable-active-high; - vin-supply = <&sys_5v0_reg>; - }; + /* USBH_EN */ + reg_usbh_vbus: regulator-usbh-vbus { + compatible = "regulator-fixed"; + regulator-name = "VCC_USBH(2A|2C|2D|3|4)"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <®_5v0>; + }; +}; - /* USBH_EN */ - usbh_vbus_reg: regulator@3 { - compatible = "regulator-fixed"; - reg = <3>; - regulator-name = "usbh_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>; - enable-active-high; - vin-supply = <&sys_5v0_reg>; - }; +&gpio { + /* Apalis GPIO7 MXM3 pin 15 PLX PEX 8605 PCIe Switch Reset */ + pex-perst-n { + gpio-hog; + gpios = <TEGRA_GPIO(S, 7) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "PEX_PERST_N"; }; }; diff --git a/dts/src/arm/tegra30-apalis-v1.1-eval.dts b/dts/src/arm/tegra30-apalis-v1.1-eval.dts new file mode 100644 index 0000000000..0be50e8816 --- /dev/null +++ b/dts/src/arm/tegra30-apalis-v1.1-eval.dts @@ -0,0 +1,266 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +/dts-v1/; + +#include <dt-bindings/input/input.h> +#include "tegra30-apalis-v1.1.dtsi" + +/ { + model = "Toradex Apalis T30 on Apalis Evaluation Board"; + compatible = "toradex,apalis_t30-v1.1-eval", "toradex,apalis_t30-eval", + "toradex,apalis_t30-v1.1", "toradex,apalis_t30", + "nvidia,tegra30"; + + aliases { + rtc0 = "/i2c@7000c000/rtc@68"; + rtc1 = "/i2c@7000d000/pmic@2d"; + rtc2 = "/rtc@7000e000"; + serial0 = &uarta; + serial1 = &uartb; + serial2 = &uartc; + serial3 = &uartd; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + pcie@3000 { + pci@1,0 { + status = "okay"; + }; + + pci@2,0 { + status = "okay"; + }; + }; + + host1x@50000000 { + dc@54200000 { + rgb { + status = "okay"; + nvidia,panel = <&panel>; + }; + }; + + hdmi@54280000 { + status = "okay"; + hdmi-supply = <®_5v0>; + }; + }; + + /* Apalis UART1 */ + serial@70006000 { + status = "okay"; + }; + + /* Apalis UART2 */ + serial@70006040 { + status = "okay"; + }; + + /* Apalis UART3 */ + serial@70006200 { + status = "okay"; + }; + + /* Apalis UART4 */ + serial@70006300 { + status = "okay"; + }; + + pwm@7000a000 { + status = "okay"; + }; + + /* + * GEN1_I2C: I2C1_SDA/SCL on MXM3 pin 209/211 (e.g. RTC on carrier + * board) + */ + i2c@7000c000 { + status = "okay"; + clock-frequency = <400000>; + + pcie-switch@58 { + compatible = "plx,pex8605"; + reg = <0x58>; + }; + + /* M41T0M6 real time clock on carrier board */ + rtc@68 { + compatible = "st,m41t0"; + reg = <0x68>; + }; + }; + + /* GEN2_I2C: unused */ + + /* + * CAM_I2C: I2C3_SDA/SCL on MXM3 pin 201/203 (e.g. camera sensor on + * carrier board) + */ + i2c@7000c500 { + status = "okay"; + clock-frequency = <400000>; + }; + + /* DDC: I2C2_SDA/SCL on MXM3 pin 205/207 (e.g. display EDID) */ + i2c@7000c700 { + status = "okay"; + }; + + /* SPI1: Apalis SPI1 */ + spi@7000d400 { + status = "okay"; + spi-max-frequency = <25000000>; + }; + + /* SPI5: Apalis SPI2 */ + spi@7000dc00 { + status = "okay"; + spi-max-frequency = <25000000>; + }; + + /* Apalis SD1 */ + sdhci@78000000 { + status = "okay"; + bus-width = <4>; + /* SD1_CD# */ + cd-gpios = <&gpio TEGRA_GPIO(CC, 5) GPIO_ACTIVE_LOW>; + no-1-8-v; + }; + + /* Apalis MMC1 */ + sdhci@78000400 { + status = "okay"; + bus-width = <8>; + /* MMC1_CD# */ + cd-gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_LOW>; + vqmmc-supply = <®_vddio_sdmmc3>; + }; + + /* EHCI instance 0: USB1_DP/N -> USBO1_DP/N */ + usb@7d000000 { + status = "okay"; + dr_mode = "otg"; + }; + + usb-phy@7d000000 { + status = "okay"; + vbus-supply = <®_usbo1_vbus>; + }; + + /* EHCI instance 1: USB2_DP/N -> USBH2_DP/N */ + usb@7d004000 { + status = "okay"; + }; + + usb-phy@7d004000 { + status = "okay"; + vbus-supply = <®_usbh_vbus>; + }; + + /* EHCI instance 2: USB3_DP/N -> USBH3_DP/N */ + usb@7d008000 { + status = "okay"; + }; + + usb-phy@7d008000 { + status = "okay"; + vbus-supply = <®_usbh_vbus>; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + brightness-levels = <255 231 223 207 191 159 127 0>; + default-brightness-level = <6>; + /* BKL1_ON */ + enable-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>; + power-supply = <®_3v3>; + pwms = <&pwm 0 5000000>; /* BKL1_PWM */ + }; + + gpio-keys { + compatible = "gpio-keys"; + + wakeup { + label = "WAKE1_MICO"; + gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_LOW>; + linux,code = <KEY_WAKEUP>; + debounce-interval = <10>; + wakeup-source; + }; + }; + + panel: panel { + /* + * edt,et057090dhu: EDT 5.7" LCD TFT + * edt,et070080dh6: EDT 7.0" LCD TFT + */ + compatible = "edt,et057090dhu", "simple-panel"; + backlight = <&backlight>; + power-supply = <®_3v3>; + }; + + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3.3V_SW"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_5v0: regulator-5v0 { + compatible = "regulator-fixed"; + regulator-name = "5V_SW"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + /* USBO1_EN */ + reg_usbo1_vbus: regulator-usbo1-vbus { + compatible = "regulator-fixed"; + regulator-name = "VCC_USBO1"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(T, 5) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <®_5v0>; + }; + + /* USBH_EN */ + reg_usbh_vbus: regulator-usbh-vbus { + compatible = "regulator-fixed"; + regulator-name = "VCC_USBH(2A|2C|2D|3|4)"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <®_5v0>; + }; + + /* + * 1.8 volt resp. 3.3 volt VDDIO_SDMMC3 depending on + * EN_+3.3_SDMMC3 GPIO + */ + reg_vddio_sdmmc3: regulator-vddio-sdmmc3 { + compatible = "regulator-gpio"; + regulator-name = "VDDIO_SDMMC3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-type = "voltage"; + gpios = <&gpio TEGRA_GPIO(J, 5) GPIO_ACTIVE_HIGH>; + states = <1800000 0x0 + 3300000 0x1>; + startup-delay-us = <100000>; + vin-supply = <&vddio_sdmmc_1v8_reg>; + }; +}; + +&gpio { + /* Apalis GPIO7 MXM3 pin 15 PLX PEX 8605 PCIe Switch Reset */ + pex-perst-n { + gpio-hog; + gpios = <TEGRA_GPIO(S, 7) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "PEX_PERST_N"; + }; +}; diff --git a/dts/src/arm/tegra30-apalis-v1.1.dtsi b/dts/src/arm/tegra30-apalis-v1.1.dtsi new file mode 100644 index 0000000000..02f8126481 --- /dev/null +++ b/dts/src/arm/tegra30-apalis-v1.1.dtsi @@ -0,0 +1,1189 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +#include "tegra30.dtsi" + +/* + * Toradex Apalis T30 Module Device Tree + * Compatible for Revisions 1GB: V1.1A, V1.1B; 1GB IT: V1.1A, V1.1B; + * 2GB: V1.1A, V1.1B + */ +/ { + memory@80000000 { + reg = <0x80000000 0x40000000>; + }; + + pcie@3000 { + status = "okay"; + avdd-pexa-supply = <&vdd2_reg>; + avdd-pexb-supply = <&vdd2_reg>; + avdd-pex-pll-supply = <&vdd2_reg>; + avdd-plle-supply = <&ldo6_reg>; + hvdd-pex-supply = <®_module_3v3>; + vddio-pex-ctl-supply = <®_module_3v3>; + vdd-pexa-supply = <&vdd2_reg>; + vdd-pexb-supply = <&vdd2_reg>; + + /* Apalis type specific */ + pci@1,0 { + nvidia,num-lanes = <4>; + }; + + /* Apalis PCIe */ + pci@2,0 { + nvidia,num-lanes = <1>; + }; + + /* I210/I211 Gigabit Ethernet Controller (on-module) */ + pci@3,0 { + status = "okay"; + nvidia,num-lanes = <1>; + + pcie@0 { + reg = <0 0 0 0 0>; + local-mac-address = [00 00 00 00 00 00]; + }; + }; + }; + + host1x@50000000 { + hdmi@54280000 { + nvidia,ddc-i2c-bus = <&hdmi_ddc>; + nvidia,hpd-gpio = + <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>; + pll-supply = <®_1v8_avdd_hdmi_pll>; + vdd-supply = <®_3v3_avdd_hdmi>; + }; + }; + + pinmux@70000868 { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + /* Analogue Audio (On-module) */ + clk1-out-pw4 { + nvidia,pins = "clk1_out_pw4"; + nvidia,function = "extperiph1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dap3-fs-pp0 { + nvidia,pins = "dap3_fs_pp0", + "dap3_sclk_pp3", + "dap3_din_pp1", + "dap3_dout_pp2"; + nvidia,function = "i2s2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis BKL1_ON */ + pv2 { + nvidia,pins = "pv2"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis BKL1_PWM */ + uart3-rts-n-pc0 { + nvidia,pins = "uart3_rts_n_pc0"; + nvidia,function = "pwm0"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + /* BKL1_PWM_EN#, disable TPS65911 PMIC PWM backlight */ + uart3-cts-n-pa1 { + nvidia,pins = "uart3_cts_n_pa1"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis CAN1 on SPI6 */ + spi2-cs0-n-px3 { + nvidia,pins = "spi2_cs0_n_px3", + "spi2_miso_px1", + "spi2_mosi_px0", + "spi2_sck_px2"; + nvidia,function = "spi6"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + /* CAN_INT1 */ + spi2-cs1-n-pw2 { + nvidia,pins = "spi2_cs1_n_pw2"; + nvidia,function = "spi3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* Apalis CAN2 on SPI4 */ + gmi-a16-pj7 { + nvidia,pins = "gmi_a16_pj7", + "gmi_a17_pb0", + "gmi_a18_pb1", + "gmi_a19_pk7"; + nvidia,function = "spi4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + /* CAN_INT2 */ + spi2-cs2-n-pw3 { + nvidia,pins = "spi2_cs2_n_pw3"; + nvidia,function = "spi3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* Apalis Digital Audio */ + clk1-req-pee2 { + nvidia,pins = "clk1_req_pee2"; + nvidia,function = "hda"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + clk2-out-pw5 { + nvidia,pins = "clk2_out_pw5"; + nvidia,function = "extperiph2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dap1-fs-pn0 { + nvidia,pins = "dap1_fs_pn0", + "dap1_din_pn1", + "dap1_dout_pn2", + "dap1_sclk_pn3"; + nvidia,function = "hda"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis GPIO */ + kb-col0-pq0 { + nvidia,pins = "kb_col0_pq0", + "kb_col1_pq1", + "kb_row10_ps2", + "kb_row11_ps3", + "kb_row12_ps4", + "kb_row13_ps5", + "kb_row14_ps6", + "kb_row15_ps7"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + /* Multiplexed and therefore disabled */ + owr { + nvidia,pins = "owr"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis HDMI1 */ + hdmi-cec-pee3 { + nvidia,pins = "hdmi_cec_pee3"; + nvidia,function = "cec"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + hdmi-int-pn7 { + nvidia,pins = "hdmi_int_pn7"; + nvidia,function = "hdmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* Apalis I2C1 */ + gen1-i2c-scl-pc4 { + nvidia,pins = "gen1_i2c_scl_pc4", + "gen1_i2c_sda_pc5"; + nvidia,function = "i2c1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + + /* Apalis I2C2 (DDC) */ + ddc-scl-pv4 { + nvidia,pins = "ddc_scl_pv4", + "ddc_sda_pv5"; + nvidia,function = "i2c4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* Apalis I2C3 (CAM) */ + cam-i2c-scl-pbb1 { + nvidia,pins = "cam_i2c_scl_pbb1", + "cam_i2c_sda_pbb2"; + nvidia,function = "i2c3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + + /* Apalis LCD1 */ + lcd-d0-pe0 { + nvidia,pins = "lcd_d0_pe0", + "lcd_d1_pe1", + "lcd_d2_pe2", + "lcd_d3_pe3", + "lcd_d4_pe4", + "lcd_d5_pe5", + "lcd_d6_pe6", + "lcd_d7_pe7", + "lcd_d8_pf0", + "lcd_d9_pf1", + "lcd_d10_pf2", + "lcd_d11_pf3", + "lcd_d12_pf4", + "lcd_d13_pf5", + "lcd_d14_pf6", + "lcd_d15_pf7", + "lcd_d16_pm0", + "lcd_d17_pm1", + "lcd_d18_pm2", + "lcd_d19_pm3", + "lcd_d20_pm4", + "lcd_d21_pm5", + "lcd_d22_pm6", + "lcd_d23_pm7", + "lcd_de_pj1", + "lcd_hsync_pj3", + "lcd_pclk_pb3", + "lcd_vsync_pj4"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* Apalis MMC1 */ + sdmmc3-clk-pa6 { + nvidia,pins = "sdmmc3_clk_pa6"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + sdmmc3-dat0-pb7 { + nvidia,pins = "sdmmc3_cmd_pa7", + "sdmmc3_dat0_pb7", + "sdmmc3_dat1_pb6", + "sdmmc3_dat2_pb5", + "sdmmc3_dat3_pb4", + "sdmmc3_dat4_pd1", + "sdmmc3_dat5_pd0", + "sdmmc3_dat6_pd3", + "sdmmc3_dat7_pd4"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + /* Apalis MMC1_CD# */ + pv3 { + nvidia,pins = "pv3"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* Apalis Parallel Camera */ + cam-mclk-pcc0 { + nvidia,pins = "cam_mclk_pcc0"; + nvidia,function = "vi_alt3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + vi-vsync-pd6 { + nvidia,pins = "vi_d0_pt4", + "vi_d1_pd5", + "vi_d2_pl0", + "vi_d3_pl1", + "vi_d4_pl2", + "vi_d5_pl3", + "vi_d6_pl4", + "vi_d7_pl5", + "vi_d8_pl6", + "vi_d9_pl7", + "vi_d10_pt2", + "vi_d11_pt3", + "vi_hsync_pd7", + "vi_pclk_pt0", + "vi_vsync_pd6"; + nvidia,function = "vi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + /* Multiplexed and therefore disabled */ + kb-col2-pq2 { + nvidia,pins = "kb_col2_pq2", + "kb_col3_pq3", + "kb_col4_pq4", + "kb_row4_pr4"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb-row0-pr0 { + nvidia,pins = "kb_row0_pr0", + "kb_row1_pr1", + "kb_row2_pr2", + "kb_row3_pr3"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb-row5-pr5 { + nvidia,pins = "kb_row5_pr5", + "kb_row6_pr6", + "kb_row7_pr7"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + /* + * VI level-shifter direction + * (pull-down => default direction input) + */ + vi-mclk-pt1 { + nvidia,pins = "vi_mclk_pt1"; + nvidia,function = "vi_alt3"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis PWM1 */ + pu6 { + nvidia,pins = "pu6"; + nvidia,function = "pwm3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis PWM2 */ + pu5 { + nvidia,pins = "pu5"; + nvidia,function = "pwm2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis PWM3 */ + pu4 { + nvidia,pins = "pu4"; + nvidia,function = "pwm1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis PWM4 */ + pu3 { + nvidia,pins = "pu3"; + nvidia,function = "pwm0"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis RESET_MOCI# */ + gmi-rst-n-pi4 { + nvidia,pins = "gmi_rst_n_pi4"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis SATA1_ACT# */ + pex-l0-prsnt-n-pdd0 { + nvidia,pins = "pex_l0_prsnt_n_pdd0"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis SD1 */ + sdmmc1-clk-pz0 { + nvidia,pins = "sdmmc1_clk_pz0"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + sdmmc1-cmd-pz1 { + nvidia,pins = "sdmmc1_cmd_pz1", + "sdmmc1_dat0_py7", + "sdmmc1_dat1_py6", + "sdmmc1_dat2_py5", + "sdmmc1_dat3_py4"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + /* Apalis SD1_CD# */ + clk2-req-pcc5 { + nvidia,pins = "clk2_req_pcc5"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* Apalis SPDIF1 */ + spdif-out-pk5 { + nvidia,pins = "spdif_out_pk5", + "spdif_in_pk6"; + nvidia,function = "spdif"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* Apalis SPI1 */ + spi1-sck-px5 { + nvidia,pins = "spi1_sck_px5", + "spi1_mosi_px4", + "spi1_miso_px7", + "spi1_cs0_n_px6"; + nvidia,function = "spi1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis SPI2 */ + lcd-sck-pz4 { + nvidia,pins = "lcd_sck_pz4", + "lcd_sdout_pn5", + "lcd_sdin_pz2", + "lcd_cs0_n_pn4"; + nvidia,function = "spi5"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + /* + * Apalis TS (Low-speed type specific) + * pins may be used as GPIOs + */ + kb-col5-pq5 { + nvidia,pins = "kb_col5_pq5"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb-col6-pq6 { + nvidia,pins = "kb_col6_pq6", + "kb_col7_pq7", + "kb_row8_ps0", + "kb_row9_ps1"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* Apalis UART1 */ + ulpi-data0 { + nvidia,pins = "ulpi_data0_po1", + "ulpi_data1_po2", + "ulpi_data2_po3", + "ulpi_data3_po4", + "ulpi_data4_po5", + "ulpi_data5_po6", + "ulpi_data6_po7", + "ulpi_data7_po0"; + nvidia,function = "uarta"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis UART2 */ + ulpi-clk-py0 { + nvidia,pins = "ulpi_clk_py0", + "ulpi_dir_py1", + "ulpi_nxt_py2", + "ulpi_stp_py3"; + nvidia,function = "uartd"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis UART3 */ + uart2-rxd-pc3 { + nvidia,pins = "uart2_rxd_pc3", + "uart2_txd_pc2"; + nvidia,function = "uartb"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis UART4 */ + uart3-rxd-pw7 { + nvidia,pins = "uart3_rxd_pw7", + "uart3_txd_pw6"; + nvidia,function = "uartc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis USBH_EN */ + pex-l0-rst-n-pdd1 { + nvidia,pins = "pex_l0_rst_n_pdd1"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis USBH_OC# */ + pex-l0-clkreq-n-pdd2 { + nvidia,pins = "pex_l0_clkreq_n_pdd2"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* Apalis USBO1_EN */ + gen2-i2c-scl-pt5 { + nvidia,pins = "gen2_i2c_scl_pt5"; + nvidia,function = "rsvd4"; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis USBO1_OC# */ + gen2-i2c-sda-pt6 { + nvidia,pins = "gen2_i2c_sda_pt6"; + nvidia,function = "rsvd4"; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* Apalis VGA1 not supported and therefore disabled */ + crt-hsync-pv6 { + nvidia,pins = "crt_hsync_pv6", + "crt_vsync_pv7"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis WAKE1_MICO */ + pv1 { + nvidia,pins = "pv1"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* eMMC (On-module) */ + sdmmc4-clk-pcc4 { + nvidia,pins = "sdmmc4_clk_pcc4", + "sdmmc4_cmd_pt7", + "sdmmc4_rst_n_pcc3"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc4-dat0-paa0 { + nvidia,pins = "sdmmc4_dat0_paa0", + "sdmmc4_dat1_paa1", + "sdmmc4_dat2_paa2", + "sdmmc4_dat3_paa3", + "sdmmc4_dat4_paa4", + "sdmmc4_dat5_paa5", + "sdmmc4_dat6_paa6", + "sdmmc4_dat7_paa7"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* EN_+3.3_SDMMC3 */ + uart2-cts-n-pj5 { + nvidia,pins = "uart2_cts_n_pj5"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* LAN i210/i211 DEV_OFF_N, PE_RST_N (On-module) */ + pex-l2-prsnt-n-pdd7 { + nvidia,pins = "pex_l2_prsnt_n_pdd7", + "pex_l2_rst_n_pcc6"; + nvidia,function = "pcie"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + /* LAN i210/i211 PE_WAKE_N, SDP3 (On-module) */ + pex-wake-n-pdd3 { + nvidia,pins = "pex_wake_n_pdd3", + "pex_l2_clkreq_n_pcc7"; + nvidia,function = "pcie"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + /* LAN i210/i211 SMB_ALERT_N (On-module) */ + sys-clk-req-pz5 { + nvidia,pins = "sys_clk_req_pz5"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* LVDS Transceiver Configuration */ + pbb0 { + nvidia,pins = "pbb0", + "pbb7", + "pcc1", + "pcc2"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pbb3 { + nvidia,pins = "pbb3", + "pbb4", + "pbb5", + "pbb6"; + nvidia,function = "displayb"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* Not connected and therefore disabled */ + clk-32k-out-pa0 { + nvidia,pins = "clk3_out_pee0", + "clk3_req_pee1", + "clk_32k_out_pa0", + "dap4_din_pp5", + "dap4_dout_pp6", + "dap4_fs_pp4", + "dap4_sclk_pp7"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dap2-fs-pa2 { + nvidia,pins = "dap2_fs_pa2", + "dap2_sclk_pa3", + "dap2_din_pa4", + "dap2_dout_pa5", + "lcd_dc0_pn6", + "lcd_m1_pw1", + "lcd_pwr1_pc1", + "pex_l1_clkreq_n_pdd6", + "pex_l1_prsnt_n_pdd4", + "pex_l1_rst_n_pdd5"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi-ad0-pg0 { + nvidia,pins = "gmi_ad0_pg0", + "gmi_ad2_pg2", + "gmi_ad3_pg3", + "gmi_ad4_pg4", + "gmi_ad5_pg5", + "gmi_ad6_pg6", + "gmi_ad7_pg7", + "gmi_ad8_ph0", + "gmi_ad9_ph1", + "gmi_ad10_ph2", + "gmi_ad11_ph3", + "gmi_ad12_ph4", + "gmi_ad13_ph5", + "gmi_ad14_ph6", + "gmi_ad15_ph7", + "gmi_adv_n_pk0", + "gmi_clk_pk1", + "gmi_cs4_n_pk2", + "gmi_cs2_n_pk3", + "gmi_dqs_pi2", + "gmi_iordy_pi5", + "gmi_oe_n_pi1", + "gmi_wait_pi7", + "gmi_wr_n_pi0", + "lcd_cs1_n_pw0", + "pu0", + "pu1", + "pu2"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi-cs0-n-pj0 { + nvidia,pins = "gmi_cs0_n_pj0", + "gmi_cs1_n_pj2", + "gmi_cs3_n_pk4"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi-cs6-n-pi3 { + nvidia,pins = "gmi_cs6_n_pi3"; + nvidia,function = "sata"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi-cs7-n-pi6 { + nvidia,pins = "gmi_cs7_n_pi6"; + nvidia,function = "gmi_alt"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + lcd-pwr0-pb2 { + nvidia,pins = "lcd_pwr0_pb2", + "lcd_pwr2_pc6", + "lcd_wr_n_pz3"; + nvidia,function = "hdcp"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + uart2-rts-n-pj6 { + nvidia,pins = "uart2_rts_n_pj6"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* Power I2C (On-module) */ + pwr-i2c-scl-pz6 { + nvidia,pins = "pwr_i2c_scl_pz6", + "pwr_i2c_sda_pz7"; + nvidia,function = "i2cpwr"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + + /* + * THERMD_ALERT#, unlatched I2C address pin of LM95245 + * temperature sensor therefore requires disabling for + * now + */ + lcd-dc1-pd2 { + nvidia,pins = "lcd_dc1_pd2"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* TOUCH_PEN_INT# (On-module) */ + pv0 { + nvidia,pins = "pv0"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + }; + }; + + serial@70006040 { + compatible = "nvidia,tegra30-hsuart"; + }; + + serial@70006200 { + compatible = "nvidia,tegra30-hsuart"; + }; + + serial@70006300 { + compatible = "nvidia,tegra30-hsuart"; + }; + + hdmi_ddc: i2c@7000c700 { + clock-frequency = <10000>; + }; + + /* + * PWR_I2C: power I2C to audio codec, PMIC, temperature sensor and + * touch screen controller + */ + i2c@7000d000 { + status = "okay"; + clock-frequency = <100000>; + + /* SGTL5000 audio codec */ + sgtl5000: codec@a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + VDDA-supply = <®_module_3v3_audio>; + VDDD-supply = <®_1v8_vio>; + VDDIO-supply = <®_module_3v3>; + clocks = <&tegra_car TEGRA30_CLK_EXTERN1>; + }; + + pmic: pmic@2d { + compatible = "ti,tps65911"; + reg = <0x2d>; + + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <2>; + interrupt-controller; + + ti,system-power-controller; + + #gpio-cells = <2>; + gpio-controller; + + vcc1-supply = <®_module_3v3>; + vcc2-supply = <®_module_3v3>; + vcc3-supply = <®_1v8_vio>; + vcc4-supply = <®_module_3v3>; + vcc5-supply = <®_module_3v3>; + vcc6-supply = <®_1v8_vio>; + vcc7-supply = <®_5v0_charge_pump>; + vccio-supply = <®_module_3v3>; + + regulators { + vdd1_reg: vdd1 { + regulator-name = "+V1.35_VDDIO_DDR"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + }; + + vdd2_reg: vdd2 { + regulator-name = "+V1.05"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + }; + + vddctrl_reg: vddctrl { + regulator-name = "+V1.0_VDD_CPU"; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + regulator-always-on; + }; + + reg_1v8_vio: vio { + regulator-name = "+V1.8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + /* + * 1.8 volt +VDDIO_SDMMC3 in case EN_+3.3_SDMMC3 + * is off + */ + vddio_sdmmc_1v8_reg: ldo1 { + regulator-name = "+VDDIO_SDMMC3_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + /* + * EN_+V3.3 switching via FET: + * +V3.3_AUDIO_AVDD_S, +V3.3 + * see also +V3.3 fixed supply + */ + ldo2_reg: ldo2 { + regulator-name = "EN_+V3.3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ldo3_reg: ldo3 { + regulator-name = "+V1.2_CSI"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + ldo4_reg: ldo4 { + regulator-name = "+V1.2_VDD_RTC"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + /* + * +V2.8_AVDD_VDAC: + * only required for (unsupported) analog RGB + */ + ldo5_reg: ldo5 { + regulator-name = "+V2.8_AVDD_VDAC"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + /* + * +V1.05_AVDD_PLLE: avdd_plle should be 1.05V + * but LDO6 can't set voltage in 50mV + * granularity + */ + ldo6_reg: ldo6 { + regulator-name = "+V1.05_AVDD_PLLE"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + }; + + ldo7_reg: ldo7 { + regulator-name = "+V1.2_AVDD_PLL"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + ldo8_reg: ldo8 { + regulator-name = "+V1.0_VDD_DDR_HS"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + }; + }; + + /* STMPE811 touch screen controller */ + touchscreen@41 { + compatible = "st,stmpe811"; + reg = <0x41>; + irq-gpio = <&gpio TEGRA_GPIO(V, 0) IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + id = <0>; + blocks = <0x5>; + irq-trigger = <0x1>; + + stmpe_touchscreen { + compatible = "st,stmpe-ts"; + /* 3.25 MHz ADC clock speed */ + st,adc-freq = <1>; + /* 8 sample average control */ + st,ave-ctrl = <3>; + /* 7 length fractional part in z */ + st,fraction-z = <7>; + /* + * 50 mA typical 80 mA max touchscreen drivers + * current limit value + */ + st,i-drive = <1>; + /* 12-bit ADC */ + st,mod-12b = <1>; + /* internal ADC reference */ + st,ref-sel = <0>; + /* ADC converstion time: 80 clocks */ + st,sample-time = <4>; + /* 1 ms panel driver settling time */ + st,settling = <3>; + /* 5 ms touch detect interrupt delay */ + st,touch-det-delay = <5>; + }; + }; + + /* + * LM95245 temperature sensor + * Note: OVERT1# directly connected to TPS65911 PMIC PWRDN + */ + temp-sensor@4c { + compatible = "national,lm95245"; + reg = <0x4c>; + }; + + /* SW: +V1.2_VDD_CORE */ + regulator@60 { + compatible = "ti,tps62362"; + reg = <0x60>; + + regulator-name = "tps62362-vout"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1400000>; + regulator-boot-on; + regulator-always-on; + ti,vsel0-state-low; + /* VSEL1: EN_CORE_DVFS_N low for DVFS */ + ti,vsel1-state-low; + }; + }; + + /* SPI4: CAN2 */ + spi@7000da00 { + status = "okay"; + spi-max-frequency = <10000000>; + + can@1 { + compatible = "microchip,mcp2515"; + reg = <1>; + clocks = <&clk16m>; + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_EDGE_FALLING>; + spi-max-frequency = <10000000>; + }; + }; + + /* SPI6: CAN1 */ + spi@7000de00 { + status = "okay"; + spi-max-frequency = <10000000>; + + can@0 { + compatible = "microchip,mcp2515"; + reg = <0>; + clocks = <&clk16m>; + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(W, 2) IRQ_TYPE_EDGE_FALLING>; + spi-max-frequency = <10000000>; + }; + }; + + pmc@7000e400 { + nvidia,invert-interrupt; + nvidia,suspend-mode = <1>; + nvidia,cpu-pwr-good-time = <5000>; + nvidia,cpu-pwr-off-time = <5000>; + nvidia,core-pwr-good-time = <3845 3845>; + nvidia,core-pwr-off-time = <0>; + nvidia,core-power-req-active-high; + nvidia,sys-clock-req-active-high; + + /* Set DEV_OFF bit in DCDC control register of TPS65911 PMIC */ + i2c-thermtrip { + nvidia,i2c-controller-id = <4>; + nvidia,bus-addr = <0x2d>; + nvidia,reg-addr = <0x3f>; + nvidia,reg-data = <0x1>; + }; + }; + + hda@70030000 { + status = "okay"; + }; + + ahub@70080000 { + i2s@70080500 { + status = "okay"; + }; + }; + + /* eMMC */ + sdhci@78000600 { + status = "okay"; + bus-width = <8>; + non-removable; + vmmc-supply = <®_module_3v3>; /* VCC */ + vqmmc-supply = <®_1v8_vio>; /* VCCQ */ + mmc-ddr-1_8v; + }; + + clk32k_in: xtal1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + + clk16m: osc4 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <16000000>; + }; + + reg_1v8_avdd_hdmi_pll: regulator-1v8-avdd-hdmi-pll { + compatible = "regulator-fixed"; + regulator-name = "+V1.8_AVDD_HDMI_PLL"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + enable-active-high; + gpio = <&pmic 6 GPIO_ACTIVE_HIGH>; + vin-supply = <®_1v8_vio>; + }; + + reg_3v3_avdd_hdmi: regulator-3v3-avdd-hdmi { + compatible = "regulator-fixed"; + regulator-name = "+V3.3_AVDD_HDMI"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&pmic 6 GPIO_ACTIVE_HIGH>; + vin-supply = <®_module_3v3>; + }; + + reg_5v0_charge_pump: regulator-5v0-charge-pump { + compatible = "regulator-fixed"; + regulator-name = "+V5.0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + reg_module_3v3: regulator-module-3v3 { + compatible = "regulator-fixed"; + regulator-name = "+V3.3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_module_3v3_audio: regulator-module-3v3-audio { + compatible = "regulator-fixed"; + regulator-name = "+V3.3_AUDIO_AVDD_S"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + sound { + compatible = "toradex,tegra-audio-sgtl5000-apalis_t30", + "nvidia,tegra-audio-sgtl5000"; + nvidia,model = "Toradex Apalis T30"; + nvidia,audio-routing = + "Headphone Jack", "HP_OUT", + "LINE_IN", "Line In Jack", + "MIC_IN", "Mic Jack"; + nvidia,i2s-controller = <&tegra_i2s2>; + nvidia,audio-codec = <&sgtl5000>; + clocks = <&tegra_car TEGRA30_CLK_PLL_A>, + <&tegra_car TEGRA30_CLK_PLL_A_OUT0>, + <&tegra_car TEGRA30_CLK_EXTERN1>; + clock-names = "pll_a", "pll_a_out0", "mclk"; + }; +}; diff --git a/dts/src/arm/tegra30-apalis.dtsi b/dts/src/arm/tegra30-apalis.dtsi index 2f807d40c1..7f112f192f 100644 --- a/dts/src/arm/tegra30-apalis.dtsi +++ b/dts/src/arm/tegra30-apalis.dtsi @@ -3,48 +3,53 @@ /* * Toradex Apalis T30 Module Device Tree - * Compatible for Revisions 1GB: V1.0A, V1.1A; 1GB IT: V1.1A; - * 2GB: V1.0B, V1.0C, V1.0E, V1.1A + * Compatible for Revisions 1GB: V1.0A; 2GB: V1.0B, V1.0C, V1.0E */ / { - model = "Toradex Apalis T30"; - compatible = "toradex,apalis_t30", "nvidia,tegra30"; - memory@80000000 { reg = <0x80000000 0x40000000>; }; pcie@3000 { + status = "okay"; avdd-pexa-supply = <&vdd2_reg>; - vdd-pexa-supply = <&vdd2_reg>; avdd-pexb-supply = <&vdd2_reg>; - vdd-pexb-supply = <&vdd2_reg>; avdd-pex-pll-supply = <&vdd2_reg>; avdd-plle-supply = <&ldo6_reg>; - vddio-pex-ctl-supply = <&sys_3v3_reg>; - hvdd-pex-supply = <&sys_3v3_reg>; + hvdd-pex-supply = <®_module_3v3>; + vddio-pex-ctl-supply = <®_module_3v3>; + vdd-pexa-supply = <&vdd2_reg>; + vdd-pexb-supply = <&vdd2_reg>; + /* Apalis type specific */ pci@1,0 { nvidia,num-lanes = <4>; }; + /* Apalis PCIe */ pci@2,0 { nvidia,num-lanes = <1>; }; + /* I210/I211 Gigabit Ethernet Controller (on-module) */ pci@3,0 { + status = "okay"; nvidia,num-lanes = <1>; + + pcie@0 { + reg = <0 0 0 0 0>; + local-mac-address = [00 00 00 00 00 00]; + }; }; }; host1x@50000000 { hdmi@54280000 { - vdd-supply = <&avdd_hdmi_3v3_reg>; - pll-supply = <&avdd_hdmi_pll_1v8_reg>; - + nvidia,ddc-i2c-bus = <&hdmi_ddc>; nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>; - nvidia,ddc-i2c-bus = <&hdmiddc>; + pll-supply = <®_1v8_avdd_hdmi_pll>; + vdd-supply = <®_3v3_avdd_hdmi>; }; }; @@ -54,18 +59,18 @@ state_default: pinmux { /* Analogue Audio (On-module) */ - clk1_out_pw4 { + clk1-out-pw4 { nvidia,pins = "clk1_out_pw4"; nvidia,function = "extperiph1"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - dap3_fs_pp0 { - nvidia,pins = "dap3_fs_pp0", - "dap3_sclk_pp3", - "dap3_din_pp1", - "dap3_dout_pp2"; + dap3-fs-pp0 { + nvidia,pins = "dap3_fs_pp0", + "dap3_sclk_pp3", + "dap3_din_pp1", + "dap3_dout_pp2"; nvidia,function = "i2s2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; @@ -77,25 +82,28 @@ nvidia,function = "rsvd4"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; /* Apalis BKL1_PWM */ - uart3_rts_n_pc0 { + uart3-rts-n-pc0 { nvidia,pins = "uart3_rts_n_pc0"; nvidia,function = "pwm0"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; /* BKL1_PWM_EN#, disable TPS65911 PMIC PWM backlight */ - uart3_cts_n_pa1 { + uart3-cts-n-pa1 { nvidia,pins = "uart3_cts_n_pa1"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; /* Apalis CAN1 on SPI6 */ - spi2_cs0_n_px3 { + spi2-cs0-n-px3 { nvidia,pins = "spi2_cs0_n_px3", "spi2_miso_px1", "spi2_mosi_px0", @@ -105,7 +113,7 @@ nvidia,tristate = <TEGRA_PIN_DISABLE>; }; /* CAN_INT1 */ - spi2_cs1_n_pw2 { + spi2-cs1-n-pw2 { nvidia,pins = "spi2_cs1_n_pw2"; nvidia,function = "spi3"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -114,7 +122,7 @@ }; /* Apalis CAN2 on SPI4 */ - gmi_a16_pj7 { + gmi-a16-pj7 { nvidia,pins = "gmi_a16_pj7", "gmi_a17_pb0", "gmi_a18_pb1", @@ -125,7 +133,7 @@ nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; /* CAN_INT2 */ - spi2_cs2_n_pw3 { + spi2-cs2-n-pw3 { nvidia,pins = "spi2_cs2_n_pw3"; nvidia,function = "spi3"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -134,20 +142,20 @@ }; /* Apalis Digital Audio */ - clk1_req_pee2 { + clk1-req-pee2 { nvidia,pins = "clk1_req_pee2"; nvidia,function = "hda"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; }; - clk2_out_pw5 { + clk2-out-pw5 { nvidia,pins = "clk2_out_pw5"; nvidia,function = "extperiph2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - dap1_fs_pn0 { + dap1-fs-pn0 { nvidia,pins = "dap1_fs_pn0", "dap1_din_pn1", "dap1_dout_pn2", @@ -157,28 +165,125 @@ nvidia,tristate = <TEGRA_PIN_DISABLE>; }; - /* Apalis I2C3 */ - cam_i2c_scl_pbb1 { + /* Apalis GPIO */ + kb-col0-pq0 { + nvidia,pins = "kb_col0_pq0", + "kb_col1_pq1", + "kb_row10_ps2", + "kb_row11_ps3", + "kb_row12_ps4", + "kb_row13_ps5", + "kb_row14_ps6", + "kb_row15_ps7"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + /* Multiplexed and therefore disabled */ + owr { + nvidia,pins = "owr"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis HDMI1 */ + hdmi-cec-pee3 { + nvidia,pins = "hdmi_cec_pee3"; + nvidia,function = "cec"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + hdmi-int-pn7 { + nvidia,pins = "hdmi_int_pn7"; + nvidia,function = "hdmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* Apalis I2C1 */ + gen1-i2c-scl-pc4 { + nvidia,pins = "gen1_i2c_scl_pc4", + "gen1_i2c_sda_pc5"; + nvidia,function = "i2c1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + + /* Apalis I2C2 (DDC) */ + ddc-scl-pv4 { + nvidia,pins = "ddc_scl_pv4", + "ddc_sda_pv5"; + nvidia,function = "i2c4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* Apalis I2C3 (CAM) */ + cam-i2c-scl-pbb1 { nvidia,pins = "cam_i2c_scl_pbb1", "cam_i2c_sda_pbb2"; nvidia,function = "i2c3"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; - nvidia,lock = <TEGRA_PIN_DISABLE>; nvidia,open-drain = <TEGRA_PIN_ENABLE>; }; + /* Apalis LCD1 */ + lcd-d0-pe0 { + nvidia,pins = "lcd_d0_pe0", + "lcd_d1_pe1", + "lcd_d2_pe2", + "lcd_d3_pe3", + "lcd_d4_pe4", + "lcd_d5_pe5", + "lcd_d6_pe6", + "lcd_d7_pe7", + "lcd_d8_pf0", + "lcd_d9_pf1", + "lcd_d10_pf2", + "lcd_d11_pf3", + "lcd_d12_pf4", + "lcd_d13_pf5", + "lcd_d14_pf6", + "lcd_d15_pf7", + "lcd_d16_pm0", + "lcd_d17_pm1", + "lcd_d18_pm2", + "lcd_d19_pm3", + "lcd_d20_pm4", + "lcd_d21_pm5", + "lcd_d22_pm6", + "lcd_d23_pm7", + "lcd_de_pj1", + "lcd_hsync_pj3", + "lcd_pclk_pb3", + "lcd_vsync_pj4"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + /* Apalis MMC1 */ - sdmmc3_clk_pa6 { - nvidia,pins = "sdmmc3_clk_pa6", - "sdmmc3_cmd_pa7"; + sdmmc3-clk-pa6 { + nvidia,pins = "sdmmc3_clk_pa6"; nvidia,function = "sdmmc3"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; }; - sdmmc3_dat0_pb7 { - nvidia,pins = "sdmmc3_dat0_pb7", + sdmmc3-dat0-pb7 { + nvidia,pins = "sdmmc3_cmd_pa7", + "sdmmc3_dat0_pb7", "sdmmc3_dat1_pb6", "sdmmc3_dat2_pb5", "sdmmc3_dat3_pb4", @@ -194,10 +299,81 @@ pv3 { nvidia,pins = "pv3"; nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* Apalis Parallel Camera */ + cam-mclk-pcc0 { + nvidia,pins = "cam_mclk_pcc0"; + nvidia,function = "vi_alt3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + vi-vsync-pd6 { + nvidia,pins = "vi_d0_pt4", + "vi_d1_pd5", + "vi_d2_pl0", + "vi_d3_pl1", + "vi_d4_pl2", + "vi_d5_pl3", + "vi_d6_pl4", + "vi_d7_pl5", + "vi_d8_pl6", + "vi_d9_pl7", + "vi_d10_pt2", + "vi_d11_pt3", + "vi_hsync_pd7", + "vi_pclk_pt0", + "vi_vsync_pd6"; + nvidia,function = "vi"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; + /* Multiplexed and therefore disabled */ + kb-col2-pq2 { + nvidia,pins = "kb_col2_pq2", + "kb_col3_pq3", + "kb_col4_pq4", + "kb_row4_pr4"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb-row0-pr0 { + nvidia,pins = "kb_row0_pr0", + "kb_row1_pr1", + "kb_row2_pr2", + "kb_row3_pr3"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb-row5-pr5 { + nvidia,pins = "kb_row5_pr5", + "kb_row6_pr6", + "kb_row7_pr7"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + /* + * VI level-shifter direction + * (pull-down => default direction input) + */ + vi-mclk-pt1 { + nvidia,pins = "vi_mclk_pt1"; + nvidia,function = "vi_alt3"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; /* Apalis PWM1 */ pu6 { @@ -232,21 +408,30 @@ }; /* Apalis RESET_MOCI# */ - gmi_rst_n_pi4 { + gmi-rst-n-pi4 { nvidia,pins = "gmi_rst_n_pi4"; nvidia,function = "gmi"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; }; + /* Apalis SATA1_ACT# */ + pex-l0-prsnt-n-pdd0 { + nvidia,pins = "pex_l0_prsnt_n_pdd0"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + /* Apalis SD1 */ - sdmmc1_clk_pz0 { + sdmmc1-clk-pz0 { nvidia,pins = "sdmmc1_clk_pz0"; nvidia,function = "sdmmc1"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; }; - sdmmc1_cmd_pz1 { + sdmmc1-cmd-pz1 { nvidia,pins = "sdmmc1_cmd_pz1", "sdmmc1_dat0_py7", "sdmmc1_dat1_py6", @@ -257,16 +442,26 @@ nvidia,tristate = <TEGRA_PIN_DISABLE>; }; /* Apalis SD1_CD# */ - clk2_req_pcc5 { + clk2-req-pcc5 { nvidia,pins = "clk2_req_pcc5"; nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* Apalis SPDIF1 */ + spdif-out-pk5 { + nvidia,pins = "spdif_out_pk5", + "spdif_in_pk6"; + nvidia,function = "spdif"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; /* Apalis SPI1 */ - spi1_sck_px5 { + spi1-sck-px5 { nvidia,pins = "spi1_sck_px5", "spi1_mosi_px4", "spi1_miso_px7", @@ -277,7 +472,7 @@ }; /* Apalis SPI2 */ - lcd_sck_pz4 { + lcd-sck-pz4 { nvidia,pins = "lcd_sck_pz4", "lcd_sdout_pn5", "lcd_sdin_pz2", @@ -287,8 +482,30 @@ nvidia,tristate = <TEGRA_PIN_DISABLE>; }; + /* + * Apalis TS (Low-speed type specific) + * pins may be used as GPIOs + */ + kb-col5-pq5 { + nvidia,pins = "kb_col5_pq5"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb-col6-pq6 { + nvidia,pins = "kb_col6_pq6", + "kb_col7_pq7", + "kb_row8_ps0", + "kb_row9_ps1"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + /* Apalis UART1 */ - ulpi_data0 { + ulpi-data0 { nvidia,pins = "ulpi_data0_po1", "ulpi_data1_po2", "ulpi_data2_po3", @@ -303,7 +520,7 @@ }; /* Apalis UART2 */ - ulpi_clk_py0 { + ulpi-clk-py0 { nvidia,pins = "ulpi_clk_py0", "ulpi_dir_py1", "ulpi_nxt_py2", @@ -314,7 +531,7 @@ }; /* Apalis UART3 */ - uart2_rxd_pc3 { + uart2-rxd-pc3 { nvidia,pins = "uart2_rxd_pc3", "uart2_txd_pc2"; nvidia,function = "uartb"; @@ -323,7 +540,7 @@ }; /* Apalis UART4 */ - uart3_rxd_pw7 { + uart3-rxd-pw7 { nvidia,pins = "uart3_rxd_pw7", "uart3_txd_pw6"; nvidia,function = "uartc"; @@ -331,8 +548,26 @@ nvidia,tristate = <TEGRA_PIN_DISABLE>; }; + /* Apalis USBH_EN */ + pex-l0-rst-n-pdd1 { + nvidia,pins = "pex_l0_rst_n_pdd1"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis USBH_OC# */ + pex-l0-clkreq-n-pdd2 { + nvidia,pins = "pex_l0_clkreq_n_pdd2"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + /* Apalis USBO1_EN */ - gen2_i2c_scl_pt5 { + gen2-i2c-scl-pt5 { nvidia,pins = "gen2_i2c_scl_pt5"; nvidia,function = "rsvd4"; nvidia,open-drain = <TEGRA_PIN_DISABLE>; @@ -341,7 +576,7 @@ }; /* Apalis USBO1_OC# */ - gen2_i2c_sda_pt6 { + gen2-i2c-sda-pt6 { nvidia,pins = "gen2_i2c_sda_pt6"; nvidia,function = "rsvd4"; nvidia,open-drain = <TEGRA_PIN_DISABLE>; @@ -350,6 +585,16 @@ nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; + /* Apalis VGA1 not supported and therefore disabled */ + crt-hsync-pv6 { + nvidia,pins = "crt_hsync_pv6", + "crt_vsync_pv7"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + /* Apalis WAKE1_MICO */ pv1 { nvidia,pins = "pv1"; @@ -360,14 +605,16 @@ }; /* eMMC (On-module) */ - sdmmc4_clk_pcc4 { + sdmmc4-clk-pcc4 { nvidia,pins = "sdmmc4_clk_pcc4", + "sdmmc4_cmd_pt7", "sdmmc4_rst_n_pcc3"; nvidia,function = "sdmmc4"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - sdmmc4_dat0_paa0 { + sdmmc4-dat0-paa0 { nvidia,pins = "sdmmc4_dat0_paa0", "sdmmc4_dat1_paa1", "sdmmc4_dat2_paa2", @@ -379,6 +626,34 @@ nvidia,function = "sdmmc4"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* LAN i210/i211 DEV_OFF_N, PE_RST_N (On-module) */ + pex-l2-prsnt-n-pdd7 { + nvidia,pins = "pex_l2_prsnt_n_pdd7", + "pex_l2_rst_n_pcc6"; + nvidia,function = "pcie"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + /* LAN i210/i211 PE_WAKE_N, SDP3 (On-module) */ + pex-wake-n-pdd3 { + nvidia,pins = "pex_wake_n_pdd3", + "pex_l2_clkreq_n_pcc7"; + nvidia,function = "pcie"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + /* LAN i210/i211 SMB_ALERT_N (On-module) */ + sys-clk-req-pz5 { + nvidia,pins = "sys_clk_req_pz5"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; /* LVDS Transceiver Configuration */ @@ -391,7 +666,6 @@ nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; - nvidia,lock = <TEGRA_PIN_DISABLE>; }; pbb3 { nvidia,pins = "pbb3", @@ -402,18 +676,121 @@ nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; - nvidia,lock = <TEGRA_PIN_DISABLE>; + }; + + /* Not connected and therefore disabled */ + clk-32k-out-pa0 { + nvidia,pins = "clk3_out_pee0", + "clk3_req_pee1", + "clk_32k_out_pa0", + "dap4_din_pp5", + "dap4_dout_pp6", + "dap4_fs_pp4", + "dap4_sclk_pp7"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dap2-fs-pa2 { + nvidia,pins = "dap2_fs_pa2", + "dap2_sclk_pa3", + "dap2_din_pa4", + "dap2_dout_pa5", + "lcd_dc0_pn6", + "lcd_m1_pw1", + "lcd_pwr1_pc1", + "pex_l1_clkreq_n_pdd6", + "pex_l1_prsnt_n_pdd4", + "pex_l1_rst_n_pdd5"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi-ad0-pg0 { + nvidia,pins = "gmi_ad0_pg0", + "gmi_ad2_pg2", + "gmi_ad3_pg3", + "gmi_ad4_pg4", + "gmi_ad5_pg5", + "gmi_ad6_pg6", + "gmi_ad7_pg7", + "gmi_ad8_ph0", + "gmi_ad9_ph1", + "gmi_ad10_ph2", + "gmi_ad11_ph3", + "gmi_ad12_ph4", + "gmi_ad13_ph5", + "gmi_ad14_ph6", + "gmi_ad15_ph7", + "gmi_adv_n_pk0", + "gmi_clk_pk1", + "gmi_cs4_n_pk2", + "gmi_cs2_n_pk3", + "gmi_dqs_pi2", + "gmi_iordy_pi5", + "gmi_oe_n_pi1", + "gmi_wait_pi7", + "gmi_wr_n_pi0", + "lcd_cs1_n_pw0", + "pu0", + "pu1", + "pu2"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi-cs0-n-pj0 { + nvidia,pins = "gmi_cs0_n_pj0", + "gmi_cs1_n_pj2", + "gmi_cs3_n_pk4"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi-cs6-n-pi3 { + nvidia,pins = "gmi_cs6_n_pi3"; + nvidia,function = "sata"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi-cs7-n-pi6 { + nvidia,pins = "gmi_cs7_n_pi6"; + nvidia,function = "gmi_alt"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + lcd-pwr0-pb2 { + nvidia,pins = "lcd_pwr0_pb2", + "lcd_pwr2_pc6", + "lcd_wr_n_pz3"; + nvidia,function = "hdcp"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + uart2-cts-n-pj5 { + nvidia,pins = "uart2_cts_n_pj5", + "uart2_rts_n_pj6"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; /* Power I2C (On-module) */ - pwr_i2c_scl_pz6 { + pwr-i2c-scl-pz6 { nvidia,pins = "pwr_i2c_scl_pz6", "pwr_i2c_sda_pz7"; nvidia,function = "i2cpwr"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; - nvidia,lock = <TEGRA_PIN_DISABLE>; nvidia,open-drain = <TEGRA_PIN_ENABLE>; }; @@ -422,15 +799,15 @@ * temperature sensor therefore requires disabling for * now */ - lcd_dc1_pd2 { + lcd-dc1-pd2 { nvidia,pins = "lcd_dc1_pd2"; nvidia,function = "rsvd3"; - nvidia,pull = <TEGRA_PIN_PULL_NONE>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; - nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - /* TOUCH_PEN_INT# */ + /* TOUCH_PEN_INT# (On-module) */ pv0 { nvidia,pins = "pv0"; nvidia,function = "rsvd1"; @@ -441,7 +818,19 @@ }; }; - hdmiddc: i2c@7000c700 { + serial@70006040 { + compatible = "nvidia,tegra30-hsuart"; + }; + + serial@70006200 { + compatible = "nvidia,tegra30-hsuart"; + }; + + serial@70006300 { + compatible = "nvidia,tegra30-hsuart"; + }; + + hdmi_ddc: i2c@7000c700 { clock-frequency = <10000>; }; @@ -457,12 +846,13 @@ sgtl5000: codec@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; - VDDA-supply = <&sys_3v3_reg>; - VDDIO-supply = <&sys_3v3_reg>; + VDDA-supply = <®_module_3v3_audio>; + VDDD-supply = <®_1v8_vio>; + VDDIO-supply = <®_module_3v3>; clocks = <&tegra_car TEGRA30_CLK_EXTERN1>; }; - pmic: tps65911@2d { + pmic: pmic@2d { compatible = "ti,tps65911"; reg = <0x2d>; @@ -475,43 +865,38 @@ #gpio-cells = <2>; gpio-controller; - vcc1-supply = <&sys_3v3_reg>; - vcc2-supply = <&sys_3v3_reg>; - vcc3-supply = <&vio_reg>; - vcc4-supply = <&sys_3v3_reg>; - vcc5-supply = <&sys_3v3_reg>; - vcc6-supply = <&vio_reg>; - vcc7-supply = <&charge_pump_5v0_reg>; - vccio-supply = <&sys_3v3_reg>; + vcc1-supply = <®_module_3v3>; + vcc2-supply = <®_module_3v3>; + vcc3-supply = <®_1v8_vio>; + vcc4-supply = <®_module_3v3>; + vcc5-supply = <®_module_3v3>; + vcc6-supply = <®_1v8_vio>; + vcc7-supply = <®_5v0_charge_pump>; + vccio-supply = <®_module_3v3>; regulators { - /* SW1: +V1.35_VDDIO_DDR */ vdd1_reg: vdd1 { - regulator-name = "vddio_ddr_1v35"; + regulator-name = "+V1.35_VDDIO_DDR"; regulator-min-microvolt = <1350000>; regulator-max-microvolt = <1350000>; regulator-always-on; }; - /* SW2: +V1.05 */ vdd2_reg: vdd2 { - regulator-name = - "vdd_pexa,vdd_pexb,vdd_sata"; + regulator-name = "+V1.05"; regulator-min-microvolt = <1050000>; regulator-max-microvolt = <1050000>; }; - /* SW CTRL: +V1.0_VDD_CPU */ vddctrl_reg: vddctrl { - regulator-name = "vdd_cpu,vdd_sys"; + regulator-name = "+V1.0_VDD_CPU"; regulator-min-microvolt = <1150000>; regulator-max-microvolt = <1150000>; regulator-always-on; }; - /* SWIO: +V1.8 */ - vio_reg: vio { - regulator-name = "vdd_1v8_gen"; + reg_1v8_vio: vio { + regulator-name = "+V1.8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; @@ -521,27 +906,24 @@ /* * EN_+V3.3 switching via FET: - * +V3.3_AUDIO_AVDD_S, +V3.3 and +V1.8_VDD_LAN - * see also v3_3 fixed supply + * +V3.3_AUDIO_AVDD_S, +V3.3 + * see also +V3.3 fixed supply */ ldo2_reg: ldo2 { - regulator-name = "en_3v3"; + regulator-name = "EN_+V3.3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; - /* +V1.2_CSI */ ldo3_reg: ldo3 { - regulator-name = - "avdd_dsi_csi,pwrdet_mipi"; + regulator-name = "+V1.2_CSI"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; }; - /* +V1.2_VDD_RTC */ ldo4_reg: ldo4 { - regulator-name = "vdd_rtc"; + regulator-name = "+V1.2_VDD_RTC"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-always-on; @@ -549,10 +931,10 @@ /* * +V2.8_AVDD_VDAC: - * only required for analog RGB + * only required for (unsupported) analog RGB */ ldo5_reg: ldo5 { - regulator-name = "avdd_vdac"; + regulator-name = "+V2.8_AVDD_VDAC"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; regulator-always-on; @@ -564,22 +946,20 @@ * granularity */ ldo6_reg: ldo6 { - regulator-name = "avdd_plle"; + regulator-name = "+V1.05_AVDD_PLLE"; regulator-min-microvolt = <1100000>; regulator-max-microvolt = <1100000>; }; - /* +V1.2_AVDD_PLL */ ldo7_reg: ldo7 { - regulator-name = "avdd_pll"; + regulator-name = "+V1.2_AVDD_PLL"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-always-on; }; - /* +V1.0_VDD_DDR_HS */ ldo8_reg: ldo8 { - regulator-name = "vdd_ddr_hs"; + regulator-name = "+V1.0_VDD_DDR_HS"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-always-on; @@ -588,11 +968,10 @@ }; /* STMPE811 touch screen controller */ - stmpe811@41 { + touchscreen@41 { compatible = "st,stmpe811"; reg = <0x41>; - interrupts = <TEGRA_GPIO(V, 0) IRQ_TYPE_LEVEL_LOW>; - interrupt-parent = <&gpio>; + irq-gpio = <&gpio TEGRA_GPIO(V, 0) IRQ_TYPE_LEVEL_LOW>; interrupt-controller; id = <0>; blocks = <0x5>; @@ -626,7 +1005,7 @@ /* * LM95245 temperature sensor - * Note: OVERT_N directly connected to PMIC PWRDN + * Note: OVERT1# directly connected to TPS65911 PMIC PWRDN */ temp-sensor@4c { compatible = "national,lm95245"; @@ -634,7 +1013,7 @@ }; /* SW: +V1.2_VDD_CORE */ - tps62362@60 { + regulator@60 { compatible = "ti,tps62362"; reg = <0x60>; @@ -659,7 +1038,7 @@ reg = <1>; clocks = <&clk16m>; interrupt-parent = <&gpio>; - interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_EDGE_RISING>; + interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_EDGE_FALLING>; spi-max-frequency = <10000000>; }; }; @@ -674,7 +1053,7 @@ reg = <0>; clocks = <&clk16m>; interrupt-parent = <&gpio>; - interrupts = <TEGRA_GPIO(W, 2) IRQ_TYPE_EDGE_RISING>; + interrupts = <TEGRA_GPIO(W, 2) IRQ_TYPE_EDGE_FALLING>; spi-max-frequency = <10000000>; }; }; @@ -688,6 +1067,18 @@ nvidia,core-pwr-off-time = <0>; nvidia,core-power-req-active-high; nvidia,sys-clock-req-active-high; + + /* Set DEV_OFF bit in DCDC control register of TPS65911 PMIC */ + i2c-thermtrip { + nvidia,i2c-controller-id = <4>; + nvidia,bus-addr = <0x2d>; + nvidia,reg-addr = <0x3f>; + nvidia,reg-data = <0x1>; + }; + }; + + hda@70030000 { + status = "okay"; }; ahub@70080000 { @@ -701,73 +1092,65 @@ status = "okay"; bus-width = <8>; non-removable; + vmmc-supply = <®_module_3v3>; /* VCC */ + vqmmc-supply = <®_1v8_vio>; /* VCCQ */ + mmc-ddr-1_8v; }; - clocks { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; + clk32k_in: xtal1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; - clk32k_in: clk@0 { - compatible = "fixed-clock"; - reg = <0>; - #clock-cells = <0>; - clock-frequency = <32768>; - }; + clk16m: osc4 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <16000000>; + }; - clk16m: clk@1 { - compatible = "fixed-clock"; - reg = <1>; - #clock-cells = <0>; - clock-frequency = <16000000>; - clock-output-names = "clk16m"; - }; + reg_1v8_avdd_hdmi_pll: regulator-1v8-avdd-hdmi-pll { + compatible = "regulator-fixed"; + regulator-name = "+V1.8_AVDD_HDMI_PLL"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + enable-active-high; + gpio = <&pmic 6 GPIO_ACTIVE_HIGH>; + vin-supply = <®_1v8_vio>; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - avdd_hdmi_pll_1v8_reg: regulator@100 { - compatible = "regulator-fixed"; - reg = <100>; - regulator-name = "+V1.8_AVDD_HDMI_PLL"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - enable-active-high; - gpio = <&pmic 6 GPIO_ACTIVE_HIGH>; - vin-supply = <&vio_reg>; - }; + reg_3v3_avdd_hdmi: regulator-3v3-avdd-hdmi { + compatible = "regulator-fixed"; + regulator-name = "+V3.3_AVDD_HDMI"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&pmic 6 GPIO_ACTIVE_HIGH>; + vin-supply = <®_module_3v3>; + }; - sys_3v3_reg: regulator@101 { - compatible = "regulator-fixed"; - reg = <101>; - regulator-name = "3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; + reg_5v0_charge_pump: regulator-5v0-charge-pump { + compatible = "regulator-fixed"; + regulator-name = "+V5.0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; - avdd_hdmi_3v3_reg: regulator@102 { - compatible = "regulator-fixed"; - reg = <102>; - regulator-name = "+V3.3_AVDD_HDMI"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - enable-active-high; - gpio = <&pmic 6 GPIO_ACTIVE_HIGH>; - vin-supply = <&sys_3v3_reg>; - }; + reg_module_3v3: regulator-module-3v3 { + compatible = "regulator-fixed"; + regulator-name = "+V3.3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; - charge_pump_5v0_reg: regulator@103 { - compatible = "regulator-fixed"; - reg = <103>; - regulator-name = "5v0"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; + reg_module_3v3_audio: regulator-module-3v3-audio { + compatible = "regulator-fixed"; + regulator-name = "+V3.3_AUDIO_AVDD_S"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; }; sound { diff --git a/dts/src/arm/tegra30-colibri-eval-v3.dts b/dts/src/arm/tegra30-colibri-eval-v3.dts index 16e1f387aa..5965150ecd 100644 --- a/dts/src/arm/tegra30-colibri-eval-v3.dts +++ b/dts/src/arm/tegra30-colibri-eval-v3.dts @@ -1,15 +1,17 @@ // SPDX-License-Identifier: GPL-2.0 /dts-v1/; +#include <dt-bindings/input/input.h> #include "tegra30-colibri.dtsi" / { model = "Toradex Colibri T30 on Colibri Evaluation Board"; - compatible = "toradex,colibri_t30-eval-v3", "toradex,colibri_t30", "nvidia,tegra30"; + compatible = "toradex,colibri_t30-eval-v3", "toradex,colibri_t30", + "nvidia,tegra30"; aliases { rtc0 = "/i2c@7000c000/rtc@68"; - rtc1 = "/i2c@7000d000/tps65911@2d"; + rtc1 = "/i2c@7000d000/pmic@2d"; rtc2 = "/rtc@7000e000"; serial0 = &uarta; serial1 = &uartb; @@ -27,22 +29,25 @@ nvidia,panel = <&panel>; }; }; + hdmi@54280000 { status = "okay"; + hdmi-supply = <®_5v0>; }; }; + /* Colibri UART-A */ serial@70006000 { status = "okay"; }; + /* Colibri UART-C */ serial@70006040 { - compatible = "nvidia,tegra30-hsuart"; status = "okay"; }; + /* Colibri UART-B */ serial@70006300 { - compatible = "nvidia,tegra30-hsuart"; status = "okay"; }; @@ -65,8 +70,12 @@ }; }; + /* GEN2_I2C: unused */ + + /* CAM_I2C (I2C3): unused */ + /* DDC_CLOCK/DATA on X3 pin 15/16 (e.g. display EDID) */ - hdmiddc: i2c@7000c700 { + i2c@7000c700 { status = "okay"; }; @@ -74,18 +83,17 @@ spi@7000d400 { status = "okay"; spi-max-frequency = <25000000>; - can0: can@0 { + + can@0 { compatible = "microchip,mcp2515"; reg = <0>; clocks = <&clk16m>; interrupt-parent = <&gpio>; - interrupts = <TEGRA_GPIO(S, 0) IRQ_TYPE_EDGE_RISING>; + /* CAN_INT */ + interrupts = <TEGRA_GPIO(S, 0) IRQ_TYPE_EDGE_FALLING>; spi-max-frequency = <10000000>; - }; - spidev0: spi@1 { - compatible = "spidev"; - reg = <1>; - spi-max-frequency = <25000000>; + vdd-supply = <®_3v3>; + xceiver-supply = <®_5v0>; }; }; @@ -93,19 +101,19 @@ sdhci@78000200 { status = "okay"; bus-width = <4>; - cd-gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_LOW>; + cd-gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_LOW>; /* MMCD */ no-1-8-v; }; /* EHCI instance 0: USB1_DP/N -> USBC_P/N */ usb@7d000000 { status = "okay"; + dr_mode = "otg"; }; usb-phy@7d000000 { status = "okay"; - dr_mode = "otg"; - vbus-supply = <&usbc_vbus_reg>; + vbus-supply = <®_usbc_vbus>; }; /* EHCI instance 2: USB3_DP/N -> USBH_P/N */ @@ -115,28 +123,23 @@ usb-phy@7d008000 { status = "okay"; - vbus-supply = <&usbh_vbus_reg>; + vbus-supply = <®_usbh_vbus>; }; backlight: backlight { compatible = "pwm-backlight"; - - /* PWM<A> */ - pwms = <&pwm 0 5000000>; brightness-levels = <255 128 64 32 16 8 4 0>; default-brightness-level = <6>; /* BL_ON */ enable-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>; + power-supply = <®_3v3>; + pwms = <&pwm 0 5000000>; /* PWM<A> */ }; - clocks { - clk16m: clk@1 { - compatible = "fixed-clock"; - reg = <1>; - #clock-cells = <0>; - clock-frequency = <16000000>; - clock-output-names = "clk16m"; - }; + clk16m: osc3 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <16000000>; }; gpio-keys { @@ -157,58 +160,39 @@ * edt,et070080dh6: EDT 7.0" LCD TFT */ compatible = "edt,et057090dhu", "simple-panel"; - backlight = <&backlight>; + power-supply = <®_3v3>; }; - pwmleds { - compatible = "pwm-leds"; - - pwmb { - label = "PWM<B>"; - pwms = <&pwm 1 19600>; - max-brightness = <255>; - }; - pwmc { - label = "PWM<C>"; - pwms = <&pwm 2 19600>; - max-brightness = <255>; - }; - pwmd { - label = "PWM<D>"; - pwms = <&pwm 3 19600>; - max-brightness = <255>; - }; + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3.3V_SW"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; }; - regulators { - sys_5v0_reg: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "5v0"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; + reg_5v0: regulator-5v0 { + compatible = "regulator-fixed"; + regulator-name = "5V_SW"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; - usbc_vbus_reg: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "usbc_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&sys_5v0_reg>; - }; + reg_usbc_vbus: regulator-usbc-vbus { + compatible = "regulator-fixed"; + regulator-name = "VCC_USB5"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <®_5v0>; + }; - /* USBH_PEN */ - usbh_vbus_reg: regulator@3 { - compatible = "regulator-fixed"; - reg = <3>; - regulator-name = "usbh_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>; - vin-supply = <&sys_5v0_reg>; - }; + /* USBH_PEN resp. USB_P_EN */ + reg_usbh_vbus: regulator-usbh-vbus { + compatible = "regulator-fixed"; + regulator-name = "VCC_USB[1-4]"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>; + vin-supply = <®_5v0>; }; }; diff --git a/dts/src/arm/tegra30-colibri.dtsi b/dts/src/arm/tegra30-colibri.dtsi index 526ed71cf7..35af03ca9e 100644 --- a/dts/src/arm/tegra30-colibri.dtsi +++ b/dts/src/arm/tegra30-colibri.dtsi @@ -1,27 +1,22 @@ // SPDX-License-Identifier: GPL-2.0 -#include <dt-bindings/input/input.h> #include "tegra30.dtsi" /* * Toradex Colibri T30 Module Device Tree - * Compatible for Revisions V1.1B, V1.1C, V1.1D, V1.1E; IT: V1.1A + * Compatible for Revisions V1.1B, V1.1C, V1.1D, V1.1E, V1.1F; IT: V1.1A, V1.1B */ / { - model = "Toradex Colibri T30"; - compatible = "toradex,colibri_t30", "nvidia,tegra30"; - memory@80000000 { reg = <0x80000000 0x40000000>; }; host1x@50000000 { hdmi@54280000 { - vdd-supply = <&avdd_hdmi_3v3_reg>; - pll-supply = <&avdd_hdmi_pll_1v8_reg>; - + nvidia,ddc-i2c-bus = <&hdmi_ddc>; nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>; - nvidia,ddc-i2c-bus = <&hdmiddc>; + pll-supply = <®_1v8_avdd_hdmi_pll>; + vdd-supply = <®_3v3_avdd_hdmi>; }; }; @@ -31,23 +26,173 @@ state_default: pinmux { /* Analogue Audio (On-module) */ - clk1_out_pw4 { + clk1-out-pw4 { nvidia,pins = "clk1_out_pw4"; nvidia,function = "extperiph1"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - dap3_fs_pp0 { - nvidia,pins = "dap3_fs_pp0", - "dap3_sclk_pp3", - "dap3_din_pp1", - "dap3_dout_pp2"; + dap3-fs-pp0 { + nvidia,pins = "dap3_fs_pp0", + "dap3_sclk_pp3", + "dap3_din_pp1", + "dap3_dout_pp2"; nvidia,function = "i2s2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; }; + /* Colibri Address/Data Bus (GMI) */ + gmi-ad0-pg0 { + nvidia,pins = "gmi_ad0_pg0", + "gmi_ad2_pg2", + "gmi_ad3_pg3", + "gmi_ad4_pg4", + "gmi_ad5_pg5", + "gmi_ad6_pg6", + "gmi_ad7_pg7", + "gmi_ad8_ph0", + "gmi_ad9_ph1", + "gmi_ad10_ph2", + "gmi_ad11_ph3", + "gmi_ad12_ph4", + "gmi_ad13_ph5", + "gmi_ad14_ph6", + "gmi_ad15_ph7", + "gmi_adv_n_pk0", + "gmi_clk_pk1", + "gmi_cs4_n_pk2", + "gmi_cs2_n_pk3", + "gmi_iordy_pi5", + "gmi_oe_n_pi1", + "gmi_wait_pi7", + "gmi_wr_n_pi0", + "dap1_fs_pn0", + "dap1_din_pn1", + "dap1_dout_pn2", + "dap1_sclk_pn3", + "dap2_fs_pa2", + "dap2_sclk_pa3", + "dap2_din_pa4", + "dap2_dout_pa5", + "spi1_sck_px5", + "spi1_mosi_px4", + "spi1_cs0_n_px6", + "spi2_cs0_n_px3", + "spi2_miso_px1", + "spi2_mosi_px0", + "spi2_sck_px2", + "uart2_cts_n_pj5", + "uart2_rts_n_pj6"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + /* Further pins may be used as GPIOs */ + dap4-din-pp5 { + nvidia,pins = "dap4_din_pp5", + "dap4_dout_pp6", + "dap4_fs_pp4", + "dap4_sclk_pp7", + "pbb7", + "sdmmc1_clk_pz0", + "sdmmc1_cmd_pz1", + "sdmmc1_dat0_py7", + "sdmmc1_dat1_py6", + "sdmmc1_dat3_py4", + "uart3_cts_n_pa1", + "uart3_txd_pw6", + "uart3_rxd_pw7"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + lcd-d18-pm2 { + nvidia,pins = "lcd_d18_pm2", + "lcd_d19_pm3", + "lcd_d20_pm4", + "lcd_d21_pm5", + "lcd_d22_pm6", + "lcd_d23_pm7", + "lcd_dc0_pn6", + "pex_l2_clkreq_n_pcc7"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + lcd-cs0-n-pn4 { + nvidia,pins = "lcd_cs0_n_pn4", + "lcd_sdin_pz2", + "pu0", + "pu1", + "pu2", + "pu3", + "pu4", + "pu5", + "pu6", + "spi1_miso_px7", + "uart3_rts_n_pc0"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + lcd-pwr0-pb2 { + nvidia,pins = "lcd_pwr0_pb2", + "lcd_sck_pz4", + "lcd_sdout_pn5", + "lcd_wr_n_pz3"; + nvidia,function = "hdcp"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pbb4 { + nvidia,pins = "pbb4", + "pbb5", + "pbb6"; + nvidia,function = "displayb"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + /* Multiplexed RDnWR and therefore disabled */ + lcd-cs1-n-pw0 { + nvidia,pins = "lcd_cs1_n_pw0"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + /* Multiplexed GMI_CLK and therefore disabled */ + owr { + nvidia,pins = "owr"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + /* Tri-stating GMI_WR_N on nPWE SODIMM pin 99 */ + sdmmc3-dat4-pd1 { + nvidia,pins = "sdmmc3_dat4_pd1"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + /* Not tri-stating GMI_WR_N on RDnWR SODIMM pin 93 */ + sdmmc3-dat5-pd0 { + nvidia,pins = "sdmmc3_dat5_pd0"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + /* Colibri BL_ON */ pv2 { nvidia,pins = "pv2"; @@ -57,7 +202,7 @@ }; /* Colibri Backlight PWM<A> */ - sdmmc3_dat3_pb4 { + sdmmc3-dat3-pb4 { nvidia,pins = "sdmmc3_dat3_pb4"; nvidia,function = "pwm0"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -65,7 +210,7 @@ }; /* Colibri CAN_INT */ - kb_row8_ps0 { + kb-row8-ps0 { nvidia,pins = "kb_row8_ps0"; nvidia,function = "kbc"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -73,26 +218,133 @@ nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; + /* Colibri DDC */ + ddc-scl-pv4 { + nvidia,pins = "ddc_scl_pv4", + "ddc_sda_pv5"; + nvidia,function = "i2c4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* Colibri EXT_IO* */ + gen2-i2c-scl-pt5 { + nvidia,pins = "gen2_i2c_scl_pt5", + "gen2_i2c_sda_pt6"; + nvidia,function = "rsvd4"; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + spdif-in-pk6 { + nvidia,pins = "spdif_in_pk6"; + nvidia,function = "hda"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* Colibri GPIO */ + clk2-out-pw5 { + nvidia,pins = "clk2_out_pw5", + "pcc2", + "pv3", + "sdmmc1_dat2_py5"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + lcd-pwr1-pc1 { + nvidia,pins = "lcd_pwr1_pc1", + "pex_l1_clkreq_n_pdd6", + "pex_l1_rst_n_pdd5"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pv1 { + nvidia,pins = "pv1", + "sdmmc3_dat0_pb7", + "sdmmc3_dat1_pb6"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* Colibri HOTPLUG_DETECT (HDMI) */ + hdmi-int-pn7 { + nvidia,pins = "hdmi_int_pn7"; + nvidia,function = "hdmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* Colibri I2C */ + gen1-i2c-scl-pc4 { + nvidia,pins = "gen1_i2c_scl_pc4", + "gen1_i2c_sda_pc5"; + nvidia,function = "i2c1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + + /* Colibri LCD (L_* resp. LDD<*>) */ + lcd-d0-pe0 { + nvidia,pins = "lcd_d0_pe0", + "lcd_d1_pe1", + "lcd_d2_pe2", + "lcd_d3_pe3", + "lcd_d4_pe4", + "lcd_d5_pe5", + "lcd_d6_pe6", + "lcd_d7_pe7", + "lcd_d8_pf0", + "lcd_d9_pf1", + "lcd_d10_pf2", + "lcd_d11_pf3", + "lcd_d12_pf4", + "lcd_d13_pf5", + "lcd_d14_pf6", + "lcd_d15_pf7", + "lcd_d16_pm0", + "lcd_d17_pm1", + "lcd_de_pj1", + "lcd_hsync_pj3", + "lcd_pclk_pb3", + "lcd_vsync_pj4"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; /* * Colibri L_BIAS, LCD_M1 is muxed with LCD_DE - * todays display need DE, disable LCD_M1 + * today's display need DE, disable LCD_M1 */ - lcd_m1_pw1 { + lcd-m1-pw1 { nvidia,pins = "lcd_m1_pw1"; nvidia,function = "rsvd3"; - nvidia,pull = <TEGRA_PIN_PULL_NONE>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; - nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; /* Colibri MMC */ - kb_row10_ps2 { + kb-row10-ps2 { nvidia,pins = "kb_row10_ps2"; nvidia,function = "sdmmc2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; }; - kb_row11_ps3 { + kb-row11-ps3 { nvidia,pins = "kb_row11_ps3", "kb_row12_ps4", "kb_row13_ps5", @@ -102,9 +354,108 @@ nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; }; + /* Colibri MMC_CD */ + gmi-wp-n-pc7 { + nvidia,pins = "gmi_wp_n_pc7"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + /* Multiplexed and therefore disabled */ + cam-mclk-pcc0 { + nvidia,pins = "cam_mclk_pcc0"; + nvidia,function = "vi_alt3"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + cam-i2c-scl-pbb1 { + nvidia,pins = "cam_i2c_scl_pbb1", + "cam_i2c_sda_pbb2"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pbb0 { + nvidia,pins = "pbb0", + "pcc1"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pbb3 { + nvidia,pins = "pbb3"; + nvidia,function = "displayb"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* Colibri nRESET_OUT */ + gmi-rst-n-pi4 { + nvidia,pins = "gmi_rst_n_pi4"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + /* + * Colibri Parallel Camera (Optional) + * pins multiplexed with others and therefore disabled + */ + vi-vsync-pd6 { + nvidia,pins = "vi_d0_pt4", + "vi_d1_pd5", + "vi_d2_pl0", + "vi_d3_pl1", + "vi_d4_pl2", + "vi_d5_pl3", + "vi_d6_pl4", + "vi_d7_pl5", + "vi_d8_pl6", + "vi_d9_pl7", + "vi_d10_pt2", + "vi_d11_pt3", + "vi_hsync_pd7", + "vi_mclk_pt1", + "vi_pclk_pt0", + "vi_vsync_pd6"; + nvidia,function = "vi"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* Colibri PWM<B> */ + sdmmc3-dat2-pb5 { + nvidia,pins = "sdmmc3_dat2_pb5"; + nvidia,function = "pwm1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + /* Colibri PWM<C> */ + sdmmc3-clk-pa6 { + nvidia,pins = "sdmmc3_clk_pa6"; + nvidia,function = "pwm2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + /* Colibri PWM<D> */ + sdmmc3-cmd-pa7 { + nvidia,pins = "sdmmc3_cmd_pa7"; + nvidia,function = "pwm3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; /* Colibri SSP */ - ulpi_clk_py0 { + ulpi-clk-py0 { nvidia,pins = "ulpi_clk_py0", "ulpi_dir_py1", "ulpi_nxt_py2", @@ -113,16 +464,18 @@ nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; }; - sdmmc3_dat6_pd3 { + /* Multiplexed SSPFRM, SSPTXD and therefore disabled */ + sdmmc3-dat6-pd3 { nvidia,pins = "sdmmc3_dat6_pd3", "sdmmc3_dat7_pd4"; nvidia,function = "spdif"; - nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - /* Colibri UART_A */ - ulpi_data0 { + /* Colibri UART-A */ + ulpi-data0 { nvidia,pins = "ulpi_data0_po1", "ulpi_data1_po2", "ulpi_data2_po3", @@ -136,8 +489,8 @@ nvidia,tristate = <TEGRA_PIN_DISABLE>; }; - /* Colibri UART_B */ - gmi_a16_pj7 { + /* Colibri UART-B */ + gmi-a16-pj7 { nvidia,pins = "gmi_a16_pj7", "gmi_a17_pb0", "gmi_a18_pb1", @@ -147,8 +500,8 @@ nvidia,tristate = <TEGRA_PIN_DISABLE>; }; - /* Colibri UART_C */ - uart2_rxd { + /* Colibri UART-C */ + uart2-rxd { nvidia,pins = "uart2_rxd_pc3", "uart2_txd_pc2"; nvidia,function = "uartb"; @@ -156,15 +509,53 @@ nvidia,tristate = <TEGRA_PIN_DISABLE>; }; - /* eMMC */ - sdmmc4_clk_pcc4 { + /* Colibri USBC_DET */ + spdif-out-pk5 { + nvidia,pins = "spdif_out_pk5"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* Colibri USBH_PEN */ + spi2-cs1-n-pw2 { + nvidia,pins = "spi2_cs1_n_pw2"; + nvidia,function = "spi2_alt"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + /* Colibri USBH_OC */ + spi2-cs2-n-pw3, { + nvidia,pins = "spi2_cs2_n_pw3"; + nvidia,function = "spi2_alt"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* Colibri VGA not supported and therefore disabled */ + crt-hsync-pv6 { + nvidia,pins = "crt_hsync_pv6", + "crt_vsync_pv7"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* eMMC (On-module) */ + sdmmc4-clk-pcc4 { nvidia,pins = "sdmmc4_clk_pcc4", + "sdmmc4_cmd_pt7", "sdmmc4_rst_n_pcc3"; nvidia,function = "sdmmc4"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - sdmmc4_dat0_paa0 { + sdmmc4-dat0-paa0 { nvidia,pins = "sdmmc4_dat0_paa0", "sdmmc4_dat1_paa1", "sdmmc4_dat2_paa2", @@ -176,17 +567,111 @@ nvidia,function = "sdmmc4"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* LAN_EXT_WAKEUP#, LAN_PME (On-module) */ + pex-l0-rst-n-pdd1 { + nvidia,pins = "pex_l0_rst_n_pdd1", + "pex_wake_n_pdd3"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + /* LAN_V_BUS, LAN_RESET# (On-module) */ + pex-l0-clkreq-n-pdd2 { + nvidia,pins = "pex_l0_clkreq_n_pdd2", + "pex_l0_prsnt_n_pdd0"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* nBATT_FAULT(SENSE), nVDD_FAULT(SENSE) */ + pex-l2-rst-n-pcc6 { + nvidia,pins = "pex_l2_rst_n_pcc6", + "pex_l2_prsnt_n_pdd7"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* Not connected and therefore disabled */ + clk1-req-pee2 { + nvidia,pins = "clk1_req_pee2", + "pex_l1_prsnt_n_pdd4"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + clk2-req-pcc5 { + nvidia,pins = "clk2_req_pcc5", + "clk3_out_pee0", + "clk3_req_pee1", + "clk_32k_out_pa0", + "hdmi_cec_pee3", + "sys_clk_req_pz5"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi-dqs-pi2 { + nvidia,pins = "gmi_dqs_pi2", + "kb_col2_pq2", + "kb_col3_pq3", + "kb_col4_pq4", + "kb_col5_pq5", + "kb_row4_pr4"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb-col0-pq0 { + nvidia,pins = "kb_col0_pq0", + "kb_col1_pq1", + "kb_col6_pq6", + "kb_col7_pq7", + "kb_row5_pr5", + "kb_row6_pr6", + "kb_row7_pr7", + "kb_row9_ps1"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb-row0-pr0 { + nvidia,pins = "kb_row0_pr0", + "kb_row1_pr1", + "kb_row2_pr2", + "kb_row3_pr3"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + lcd-pwr2-pc6 { + nvidia,pins = "lcd_pwr2_pc6"; + nvidia,function = "hdcp"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; /* Power I2C (On-module) */ - pwr_i2c_scl_pz6 { + pwr-i2c-scl-pz6 { nvidia,pins = "pwr_i2c_scl_pz6", "pwr_i2c_sda_pz7"; nvidia,function = "i2cpwr"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; - nvidia,lock = <TEGRA_PIN_DISABLE>; nvidia,open-drain = <TEGRA_PIN_ENABLE>; }; @@ -195,15 +680,15 @@ * temperature sensor therefore requires disabling for * now */ - lcd_dc1_pd2 { + lcd-dc1-pd2 { nvidia,pins = "lcd_dc1_pd2"; nvidia,function = "rsvd3"; - nvidia,pull = <TEGRA_PIN_PULL_NONE>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; - nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - /* TOUCH_PEN_INT# */ + /* TOUCH_PEN_INT# (On-module) */ pv0 { nvidia,pins = "pv0"; nvidia,function = "rsvd1"; @@ -214,13 +699,21 @@ }; }; - hdmiddc: i2c@7000c700 { + serial@70006040 { + compatible = "nvidia,tegra30-hsuart"; + }; + + serial@70006300 { + compatible = "nvidia,tegra30-hsuart"; + }; + + hdmi_ddc: i2c@7000c700 { clock-frequency = <10000>; }; /* * PWR_I2C: power I2C to audio codec, PMIC, temperature sensor and - * touch screen controller + * touch screen controller (On-module) */ i2c@7000d000 { status = "okay"; @@ -230,12 +723,13 @@ sgtl5000: codec@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; - VDDA-supply = <&sys_3v3_reg>; - VDDIO-supply = <&sys_3v3_reg>; + VDDA-supply = <®_module_3v3_audio>; + VDDD-supply = <®_1v8_vio>; + VDDIO-supply = <®_module_3v3>; clocks = <&tegra_car TEGRA30_CLK_EXTERN1>; }; - pmic: tps65911@2d { + pmic: pmic@2d { compatible = "ti,tps65911"; reg = <0x2d>; @@ -248,19 +742,18 @@ #gpio-cells = <2>; gpio-controller; - vcc1-supply = <&sys_3v3_reg>; - vcc2-supply = <&sys_3v3_reg>; - vcc3-supply = <&vio_reg>; - vcc4-supply = <&sys_3v3_reg>; - vcc5-supply = <&sys_3v3_reg>; - vcc6-supply = <&vio_reg>; - vcc7-supply = <&charge_pump_5v0_reg>; - vccio-supply = <&sys_3v3_reg>; + vcc1-supply = <®_module_3v3>; + vcc2-supply = <®_module_3v3>; + vcc3-supply = <®_1v8_vio>; + vcc4-supply = <®_module_3v3>; + vcc5-supply = <®_module_3v3>; + vcc6-supply = <®_1v8_vio>; + vcc7-supply = <®_5v0_charge_pump>; + vccio-supply = <®_module_3v3>; regulators { - /* SW1: +V1.35_VDDIO_DDR */ vdd1_reg: vdd1 { - regulator-name = "vddio_ddr_1v35"; + regulator-name = "+V1.35_VDDIO_DDR"; regulator-min-microvolt = <1350000>; regulator-max-microvolt = <1350000>; regulator-always-on; @@ -268,17 +761,15 @@ /* SW2: unused */ - /* SW CTRL: +V1.0_VDD_CPU */ vddctrl_reg: vddctrl { - regulator-name = "vdd_cpu,vdd_sys"; + regulator-name = "+V1.0_VDD_CPU"; regulator-min-microvolt = <1150000>; regulator-max-microvolt = <1150000>; regulator-always-on; }; - /* SWIO: +V1.8 */ - vio_reg: vio { - regulator-name = "vdd_1v8_gen"; + reg_1v8_vio: vio { + regulator-name = "+V1.8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; @@ -289,10 +780,10 @@ /* * EN_+V3.3 switching via FET: * +V3.3_AUDIO_AVDD_S, +V3.3 and +V1.8_VDD_LAN - * see also 3v3 fixed supply + * see also +V3.3 fixed supply */ ldo2_reg: ldo2 { - regulator-name = "en_3v3"; + regulator-name = "EN_+V3.3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; @@ -300,9 +791,8 @@ /* LDO3: unused */ - /* +V1.2_VDD_RTC */ ldo4_reg: ldo4 { - regulator-name = "vdd_rtc"; + regulator-name = "+V1.2_VDD_RTC"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-always-on; @@ -310,10 +800,10 @@ /* * +V2.8_AVDD_VDAC: - * only required for analog RGB + * only required for (unsupported) analog RGB */ ldo5_reg: ldo5 { - regulator-name = "avdd_vdac"; + regulator-name = "+V2.8_AVDD_VDAC"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; regulator-always-on; @@ -325,22 +815,20 @@ * granularity */ ldo6_reg: ldo6 { - regulator-name = "avdd_plle"; + regulator-name = "+V1.05_AVDD_PLLE"; regulator-min-microvolt = <1100000>; regulator-max-microvolt = <1100000>; }; - /* +V1.2_AVDD_PLL */ ldo7_reg: ldo7 { - regulator-name = "avdd_pll"; + regulator-name = "+V1.2_AVDD_PLL"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-always-on; }; - /* +V1.0_VDD_DDR_HS */ ldo8_reg: ldo8 { - regulator-name = "vdd_ddr_hs"; + regulator-name = "+V1.0_VDD_DDR_HS"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-always-on; @@ -349,11 +837,10 @@ }; /* STMPE811 touch screen controller */ - stmpe811@41 { + touchscreen@41 { compatible = "st,stmpe811"; reg = <0x41>; - interrupts = <TEGRA_GPIO(V, 0) IRQ_TYPE_LEVEL_LOW>; - interrupt-parent = <&gpio>; + irq-gpio = <&gpio TEGRA_GPIO(V, 0) IRQ_TYPE_LEVEL_LOW>; interrupt-controller; id = <0>; blocks = <0x5>; @@ -387,7 +874,7 @@ /* * LM95245 temperature sensor - * Note: OVERT_N directly connected to PMIC PWRDN + * Note: OVERT1# directly connected to TPS65911 PMIC PWRDN */ temp-sensor@4c { compatible = "national,lm95245"; @@ -395,7 +882,7 @@ }; /* SW: +V1.2_VDD_CORE */ - tps62362@60 { + regulator@60 { compatible = "ti,tps62362"; reg = <0x60>; @@ -419,6 +906,18 @@ nvidia,core-pwr-off-time = <0>; nvidia,core-power-req-active-high; nvidia,sys-clock-req-active-high; + + /* Set DEV_OFF bit in DCDC control register of TPS65911 PMIC */ + i2c-thermtrip { + nvidia,i2c-controller-id = <4>; + nvidia,bus-addr = <0x2d>; + nvidia,reg-addr = <0x3f>; + nvidia,reg-data = <0x1>; + }; + }; + + hda@70030000 { + status = "okay"; }; ahub@70080000 { @@ -432,75 +931,85 @@ status = "okay"; bus-width = <8>; non-removable; + vmmc-supply = <®_module_3v3>; /* VCC */ + vqmmc-supply = <®_1v8_vio>; /* VCCQ */ + mmc-ddr-1_8v; }; - /* EHCI instance 1: USB2_DP/N -> AX88772B */ + /* EHCI instance 1: USB2_DP/N -> AX88772B (On-module) */ usb@7d004000 { status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + asix@1 { + reg = <1>; + local-mac-address = [00 00 00 00 00 00]; + }; }; usb-phy@7d004000 { status = "okay"; - nvidia,is-wired = <1>; + vbus-supply = <®_lan_v_bus>; }; - clocks { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; + clk32k_in: xtal1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; - clk32k_in: clk@0 { - compatible = "fixed-clock"; - reg = <0>; - #clock-cells = <0>; - clock-frequency = <32768>; - }; + reg_1v8_avdd_hdmi_pll: regulator-1v8-avdd-hdmi-pll { + compatible = "regulator-fixed"; + regulator-name = "+V1.8_AVDD_HDMI_PLL"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + enable-active-high; + gpio = <&pmic 6 GPIO_ACTIVE_HIGH>; + vin-supply = <®_1v8_vio>; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; + reg_3v3_avdd_hdmi: regulator-3v3-avdd-hdmi { + compatible = "regulator-fixed"; + regulator-name = "+V3.3_AVDD_HDMI"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&pmic 6 GPIO_ACTIVE_HIGH>; + vin-supply = <®_module_3v3>; + }; - avdd_hdmi_pll_1v8_reg: regulator@100 { - compatible = "regulator-fixed"; - reg = <100>; - regulator-name = "+V1.8_AVDD_HDMI_PLL"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - enable-active-high; - gpio = <&pmic 6 GPIO_ACTIVE_HIGH>; - vin-supply = <&vio_reg>; - }; + reg_5v0_charge_pump: regulator-5v0-charge-pump { + compatible = "regulator-fixed"; + regulator-name = "+V5.0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; - sys_3v3_reg: regulator@101 { - compatible = "regulator-fixed"; - reg = <101>; - regulator-name = "3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; + reg_lan_v_bus: regulator-lan-v-bus { + compatible = "regulator-fixed"; + regulator-name = "LAN_V_BUS"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&gpio TEGRA_GPIO(DD, 2) GPIO_ACTIVE_HIGH>; + }; - avdd_hdmi_3v3_reg: regulator@102 { - compatible = "regulator-fixed"; - reg = <102>; - regulator-name = "+V3.3_AVDD_HDMI"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - enable-active-high; - gpio = <&pmic 6 GPIO_ACTIVE_HIGH>; - vin-supply = <&sys_3v3_reg>; - }; + reg_module_3v3: regulator-module-3v3 { + compatible = "regulator-fixed"; + regulator-name = "+V3.3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; - charge_pump_5v0_reg: regulator@103 { - compatible = "regulator-fixed"; - reg = <103>; - regulator-name = "5v0"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; + reg_module_3v3_audio: regulator-module-3v3-audio { + compatible = "regulator-fixed"; + regulator-name = "+V3.3_AUDIO_AVDD_S"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; }; sound { @@ -519,3 +1028,12 @@ clock-names = "pll_a", "pll_a_out0", "mclk"; }; }; + +&gpio { + lan-reset-n { + gpio-hog; + gpios = <TEGRA_GPIO(DD, 0) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "LAN_RESET#"; + }; +}; diff --git a/dts/src/arm/tegra30.dtsi b/dts/src/arm/tegra30.dtsi index a6781f6533..d2b553f767 100644 --- a/dts/src/arm/tegra30.dtsi +++ b/dts/src/arm/tegra30.dtsi @@ -896,7 +896,7 @@ nvidia,elastic-limit = <16>; nvidia,term-range-adj = <6>; nvidia,xcvr-setup = <51>; - nvidia.xcvr-setup-use-fuses; + nvidia,xcvr-setup-use-fuses; nvidia,xcvr-lsfslew = <1>; nvidia,xcvr-lsrslew = <1>; nvidia,xcvr-hsslew = <32>; @@ -933,7 +933,7 @@ nvidia,elastic-limit = <16>; nvidia,term-range-adj = <6>; nvidia,xcvr-setup = <51>; - nvidia.xcvr-setup-use-fuses; + nvidia,xcvr-setup-use-fuses; nvidia,xcvr-lsfslew = <2>; nvidia,xcvr-lsrslew = <2>; nvidia,xcvr-hsslew = <32>; @@ -969,7 +969,7 @@ nvidia,elastic-limit = <16>; nvidia,term-range-adj = <6>; nvidia,xcvr-setup = <51>; - nvidia.xcvr-setup-use-fuses; + nvidia,xcvr-setup-use-fuses; nvidia,xcvr-lsfslew = <2>; nvidia,xcvr-lsrslew = <2>; nvidia,xcvr-hsslew = <32>; @@ -1013,5 +1013,9 @@ <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&{/cpus/cpu@0}>, + <&{/cpus/cpu@1}>, + <&{/cpus/cpu@2}>, + <&{/cpus/cpu@3}>; }; }; diff --git a/dts/src/arm/uniphier-ld4-ref.dts b/dts/src/arm/uniphier-ld4-ref.dts index 21407e159b..3aaca10f66 100644 --- a/dts/src/arm/uniphier-ld4-ref.dts +++ b/dts/src/arm/uniphier-ld4-ref.dts @@ -63,6 +63,10 @@ status = "okay"; }; +&sd { + status = "okay"; +}; + &usb0 { status = "okay"; }; diff --git a/dts/src/arm/uniphier-ld4.dtsi b/dts/src/arm/uniphier-ld4.dtsi index 37950ad2de..b73d594b6d 100644 --- a/dts/src/arm/uniphier-ld4.dtsi +++ b/dts/src/arm/uniphier-ld4.dtsi @@ -63,6 +63,17 @@ cache-level = <2>; }; + spi: spi@54006000 { + compatible = "socionext,uniphier-scssi"; + status = "disabled"; + reg = <0x54006000 0x100>; + interrupts = <0 39 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi0>; + clocks = <&peri_clk 11>; + resets = <&peri_rst 11>; + }; + serial0: serial@54006800 { compatible = "socionext,uniphier-uart"; status = "disabled"; @@ -224,6 +235,40 @@ }; }; + sd: sdhc@5a400000 { + compatible = "socionext,uniphier-sd-v2.91"; + status = "disabled"; + reg = <0x5a400000 0x200>; + interrupts = <0 76 4>; + pinctrl-names = "default", "uhs"; + pinctrl-0 = <&pinctrl_sd>; + pinctrl-1 = <&pinctrl_sd_uhs>; + clocks = <&mio_clk 0>; + reset-names = "host", "bridge"; + resets = <&mio_rst 0>, <&mio_rst 3>; + bus-width = <4>; + cap-sd-highspeed; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + }; + + emmc: sdhc@5a500000 { + compatible = "socionext,uniphier-sd-v2.91"; + status = "disabled"; + reg = <0x5a500000 0x200>; + interrupts = <0 78 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_emmc>; + clocks = <&mio_clk 1>; + reset-names = "host", "bridge", "hw"; + resets = <&mio_rst 1>, <&mio_rst 4>, <&mio_rst 6>; + bus-width = <8>; + cap-mmc-highspeed; + cap-mmc-hw-reset; + non-removable; + }; + usb0: usb@5a800100 { compatible = "socionext,uniphier-ehci", "generic-ehci"; status = "disabled"; @@ -347,7 +392,8 @@ interrupts = <0 65 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_nand2cs>; - clocks = <&sys_clk 2>; + clock-names = "nand", "nand_x", "ecc"; + clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>; resets = <&sys_rst 2>; }; }; diff --git a/dts/src/arm/uniphier-ld6b-ref.dts b/dts/src/arm/uniphier-ld6b-ref.dts index a0a44a422e..3d9080ee7a 100644 --- a/dts/src/arm/uniphier-ld6b-ref.dts +++ b/dts/src/arm/uniphier-ld6b-ref.dts @@ -65,6 +65,10 @@ status = "okay"; }; +&sd { + status = "okay"; +}; + ð { status = "okay"; phy-handle = <ðphy>; @@ -76,6 +80,14 @@ }; }; +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; + &nand { status = "okay"; }; diff --git a/dts/src/arm/uniphier-pinctrl.dtsi b/dts/src/arm/uniphier-pinctrl.dtsi index 51f0e69f49..1fee5ffbfb 100644 --- a/dts/src/arm/uniphier-pinctrl.dtsi +++ b/dts/src/arm/uniphier-pinctrl.dtsi @@ -121,11 +121,36 @@ function = "sd"; }; + pinctrl_sd_uhs: sd-uhs { + groups = "sd"; + function = "sd"; + }; + pinctrl_sd1: sd1 { groups = "sd1"; function = "sd1"; }; + pinctrl_spi0: spi0 { + groups = "spi0"; + function = "spi0"; + }; + + pinctrl_spi1: spi1 { + groups = "spi1"; + function = "spi1"; + }; + + pinctrl_spi2: spi2 { + groups = "spi2"; + function = "spi2"; + }; + + pinctrl_spi3: spi3 { + groups = "spi3"; + function = "spi3"; + }; + pinctrl_system_bus: system-bus { groups = "system_bus", "system_bus_cs1"; function = "system_bus"; diff --git a/dts/src/arm/uniphier-pro4-ace.dts b/dts/src/arm/uniphier-pro4-ace.dts index db1b08935a..92cc48dd86 100644 --- a/dts/src/arm/uniphier-pro4-ace.dts +++ b/dts/src/arm/uniphier-pro4-ace.dts @@ -68,6 +68,10 @@ status = "okay"; }; +&sd { + status = "okay"; +}; + &usb2 { status = "okay"; }; @@ -86,3 +90,11 @@ reg = <1>; }; }; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; diff --git a/dts/src/arm/uniphier-pro4-ref.dts b/dts/src/arm/uniphier-pro4-ref.dts index efb084983b..28038b17bb 100644 --- a/dts/src/arm/uniphier-pro4-ref.dts +++ b/dts/src/arm/uniphier-pro4-ref.dts @@ -65,6 +65,10 @@ status = "okay"; }; +&sd { + status = "okay"; +}; + &usb2 { status = "okay"; }; @@ -84,6 +88,14 @@ }; }; +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; + &nand { status = "okay"; }; diff --git a/dts/src/arm/uniphier-pro4-sanji.dts b/dts/src/arm/uniphier-pro4-sanji.dts index dac4d6679a..dda1a2f214 100644 --- a/dts/src/arm/uniphier-pro4-sanji.dts +++ b/dts/src/arm/uniphier-pro4-sanji.dts @@ -71,6 +71,10 @@ status = "okay"; }; +&emmc { + status = "okay"; +}; + ð { status = "okay"; phy-handle = <ðphy>; @@ -81,3 +85,11 @@ reg = <1>; }; }; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; diff --git a/dts/src/arm/uniphier-pro4.dtsi b/dts/src/arm/uniphier-pro4.dtsi index 49539f0352..0beb606cf3 100644 --- a/dts/src/arm/uniphier-pro4.dtsi +++ b/dts/src/arm/uniphier-pro4.dtsi @@ -71,6 +71,17 @@ cache-level = <2>; }; + spi0: spi@54006000 { + compatible = "socionext,uniphier-scssi"; + status = "disabled"; + reg = <0x54006000 0x100>; + interrupts = <0 39 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi0>; + clocks = <&peri_clk 11>; + resets = <&peri_rst 11>; + }; + serial0: serial@54006800 { compatible = "socionext,uniphier-uart"; status = "disabled"; @@ -258,6 +269,54 @@ }; }; + sd: sdhc@5a400000 { + compatible = "socionext,uniphier-sd-v2.91"; + status = "disabled"; + reg = <0x5a400000 0x200>; + interrupts = <0 76 4>; + pinctrl-names = "default", "uhs"; + pinctrl-0 = <&pinctrl_sd>; + pinctrl-1 = <&pinctrl_sd_uhs>; + clocks = <&mio_clk 0>; + reset-names = "host", "bridge"; + resets = <&mio_rst 0>, <&mio_rst 3>; + bus-width = <4>; + cap-sd-highspeed; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + }; + + emmc: sdhc@5a500000 { + compatible = "socionext,uniphier-sd-v2.91"; + status = "disabled"; + reg = <0x5a500000 0x200>; + interrupts = <0 78 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_emmc>; + clocks = <&mio_clk 1>; + reset-names = "host", "bridge", "hw"; + resets = <&mio_rst 1>, <&mio_rst 4>, <&mio_rst 6>; + bus-width = <8>; + cap-mmc-highspeed; + cap-mmc-hw-reset; + non-removable; + }; + + sd1: sdhc@5a600000 { + compatible = "socionext,uniphier-sd-v2.91"; + status = "disabled"; + reg = <0x5a600000 0x200>; + interrupts = <0 85 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sd1>; + clocks = <&mio_clk 2>; + reset-names = "host", "bridge"; + resets = <&mio_rst 2>, <&mio_rst 5>; + bus-width = <4>; + cap-sd-highspeed; + }; + usb2: usb@5a800100 { compatible = "socionext,uniphier-ehci", "generic-ehci"; status = "disabled"; @@ -269,6 +328,8 @@ <&mio_clk 12>; resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 8>, <&mio_rst 12>; + phy-names = "usb"; + phys = <&usb_phy0>; has-transaction-translator; }; @@ -283,6 +344,8 @@ <&mio_clk 13>; resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 9>, <&mio_rst 13>; + phy-names = "usb"; + phys = <&usb_phy1>; has-transaction-translator; }; @@ -294,6 +357,34 @@ pinctrl: pinctrl { compatible = "socionext,uniphier-pro4-pinctrl"; }; + + usb-phy { + compatible = "socionext,uniphier-pro4-usb2-phy"; + #address-cells = <1>; + #size-cells = <0>; + + usb_phy0: phy@0 { + reg = <0>; + #phy-cells = <0>; + }; + + usb_phy1: phy@1 { + reg = <1>; + #phy-cells = <0>; + }; + + usb_phy2: phy@2 { + reg = <2>; + #phy-cells = <0>; + vbus-supply = <&usb0_vbus>; + }; + + usb_phy3: phy@3 { + reg = <3>; + #phy-cells = <0>; + vbus-supply = <&usb1_vbus>; + }; + }; }; soc-glue@5f900000 { @@ -386,6 +477,101 @@ }; }; + usb0: usb@65a00000 { + compatible = "socionext,uniphier-dwc3", "snps,dwc3"; + status = "disabled"; + reg = <0x65a00000 0xcd00>; + interrupt-names = "host", "peripheral"; + interrupts = <0 134 4>, <0 135 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb0>; + clock-names = "ref", "bus_early", "suspend"; + clocks = <&sys_clk 12>, <&sys_clk 12>, <&sys_clk 12>; + resets = <&usb0_rst 4>; + phys = <&usb_phy2>, <&usb0_ssphy>; + dr_mode = "host"; + }; + + usb-glue@65b00000 { + compatible = "socionext,uniphier-pro4-dwc3-glue", + "simple-mfd"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x65b00000 0x100>; + + usb0_vbus: regulator@0 { + compatible = "socionext,uniphier-pro4-usb3-regulator"; + reg = <0 0x10>; + clock-names = "gio", "link"; + clocks = <&sys_clk 12>, <&sys_clk 14>; + reset-names = "gio", "link"; + resets = <&sys_rst 12>, <&sys_rst 14>; + }; + + usb0_ssphy: ss-phy@10 { + compatible = "socionext,uniphier-pro4-usb3-ssphy"; + reg = <0x10 0x10>; + #phy-cells = <0>; + clock-names = "gio", "link"; + clocks = <&sys_clk 12>, <&sys_clk 14>; + reset-names = "gio", "link"; + resets = <&sys_rst 12>, <&sys_rst 14>; + vbus-supply = <&usb0_vbus>; + }; + + usb0_rst: reset@40 { + compatible = "socionext,uniphier-pro4-usb3-reset"; + reg = <0x40 0x4>; + #reset-cells = <1>; + clock-names = "gio", "link"; + clocks = <&sys_clk 12>, <&sys_clk 14>; + reset-names = "gio", "link"; + resets = <&sys_rst 12>, <&sys_rst 14>; + }; + }; + + usb1: usb@65c00000 { + compatible = "socionext,uniphier-dwc3", "snps,dwc3"; + status = "disabled"; + reg = <0x65c00000 0xcd00>; + interrupt-names = "host", "peripheral"; + interrupts = <0 137 4>, <0 138 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb1>; + clock-names = "ref", "bus_early", "suspend"; + clocks = <&sys_clk 12>, <&sys_clk 12>, <&sys_clk 12>; + resets = <&usb1_rst 4>; + phys = <&usb_phy3>; + dr_mode = "host"; + }; + + usb-glue@65d00000 { + compatible = "socionext,uniphier-pro4-dwc3-glue", + "simple-mfd"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x65d00000 0x100>; + + usb1_vbus: regulator@0 { + compatible = "socionext,uniphier-pro4-usb3-regulator"; + reg = <0 0x10>; + clock-names = "gio", "link"; + clocks = <&sys_clk 12>, <&sys_clk 15>; + reset-names = "gio", "link"; + resets = <&sys_rst 12>, <&sys_rst 15>; + }; + + usb1_rst: reset@40 { + compatible = "socionext,uniphier-pro4-usb3-reset"; + reg = <0x40 0x4>; + #reset-cells = <1>; + clock-names = "gio", "link"; + clocks = <&sys_clk 12>, <&sys_clk 15>; + reset-names = "gio", "link"; + resets = <&sys_rst 12>, <&sys_rst 15>; + }; + }; + nand: nand@68000000 { compatible = "socionext,uniphier-denali-nand-v5a"; status = "disabled"; @@ -394,7 +580,8 @@ interrupts = <0 65 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_nand>; - clocks = <&sys_clk 2>; + clock-names = "nand", "nand_x", "ecc"; + clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>; resets = <&sys_rst 2>; }; }; diff --git a/dts/src/arm/uniphier-pro5.dtsi b/dts/src/arm/uniphier-pro5.dtsi index 06c2cef91e..3657387394 100644 --- a/dts/src/arm/uniphier-pro5.dtsi +++ b/dts/src/arm/uniphier-pro5.dtsi @@ -156,6 +156,28 @@ cache-level = <3>; }; + spi0: spi@54006000 { + compatible = "socionext,uniphier-scssi"; + status = "disabled"; + reg = <0x54006000 0x100>; + interrupts = <0 39 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi0>; + clocks = <&peri_clk 11>; + resets = <&peri_rst 11>; + }; + + spi1: spi@54006100 { + compatible = "socionext,uniphier-scssi"; + status = "disabled"; + reg = <0x54006100 0x100>; + interrupts = <0 216 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1>; + clocks = <&peri_clk 11>; + resets = <&peri_rst 11>; + }; + serial0: serial@54006800 { compatible = "socionext,uniphier-uart"; status = "disabled"; @@ -439,9 +461,44 @@ interrupts = <0 65 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_nand2cs>; - clocks = <&sys_clk 2>; + clock-names = "nand", "nand_x", "ecc"; + clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>; resets = <&sys_rst 2>; }; + + emmc: sdhc@68400000 { + compatible = "socionext,uniphier-sd-v3.1"; + status = "disabled"; + reg = <0x68400000 0x800>; + interrupts = <0 78 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_emmc>; + clocks = <&sd_clk 1>; + reset-names = "host", "hw"; + resets = <&sd_rst 1>, <&sd_rst 6>; + bus-width = <8>; + cap-mmc-highspeed; + cap-mmc-hw-reset; + non-removable; + }; + + sd: sdhc@68800000 { + compatible = "socionext,uniphier-sd-v3.1"; + status = "disabled"; + reg = <0x68800000 0x800>; + interrupts = <0 76 4>; + pinctrl-names = "default", "uhs"; + pinctrl-0 = <&pinctrl_sd>; + pinctrl-1 = <&pinctrl_sd_uhs>; + clocks = <&sd_clk 0>; + reset-names = "host"; + resets = <&sd_rst 0>; + bus-width = <4>; + cap-sd-highspeed; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + }; }; }; diff --git a/dts/src/arm/uniphier-pxs2-gentil.dts b/dts/src/arm/uniphier-pxs2-gentil.dts index bed26b8ed9..e27fd4f2a5 100644 --- a/dts/src/arm/uniphier-pxs2-gentil.dts +++ b/dts/src/arm/uniphier-pxs2-gentil.dts @@ -76,6 +76,10 @@ }; }; +&emmc { + status = "okay"; +}; + ð { status = "okay"; phy-handle = <ðphy>; @@ -86,3 +90,11 @@ reg = <1>; }; }; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; diff --git a/dts/src/arm/uniphier-pxs2-vodka.dts b/dts/src/arm/uniphier-pxs2-vodka.dts index b13d2d16dd..23fe42b740 100644 --- a/dts/src/arm/uniphier-pxs2-vodka.dts +++ b/dts/src/arm/uniphier-pxs2-vodka.dts @@ -77,6 +77,10 @@ status = "okay"; }; +&emmc { + status = "okay"; +}; + ð { status = "okay"; phy-handle = <ðphy>; @@ -87,3 +91,7 @@ reg = <1>; }; }; + +&usb0 { + status = "okay"; +}; diff --git a/dts/src/arm/uniphier-pxs2.dtsi b/dts/src/arm/uniphier-pxs2.dtsi index e2d1a22c59..8d20e9548e 100644 --- a/dts/src/arm/uniphier-pxs2.dtsi +++ b/dts/src/arm/uniphier-pxs2.dtsi @@ -167,6 +167,28 @@ cache-level = <2>; }; + spi0: spi@54006000 { + compatible = "socionext,uniphier-scssi"; + status = "disabled"; + reg = <0x54006000 0x100>; + interrupts = <0 39 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi0>; + clocks = <&peri_clk 11>; + resets = <&peri_rst 11>; + }; + + spi1: spi@54006100 { + compatible = "socionext,uniphier-scssi"; + status = "disabled"; + reg = <0x54006100 0x100>; + interrupts = <0 216 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1>; + clocks = <&peri_clk 11>; + resets = <&peri_rst 11>; + }; + serial0: serial@54006800 { compatible = "socionext,uniphier-uart"; status = "disabled"; @@ -422,6 +444,40 @@ }; }; + emmc: sdhc@5a000000 { + compatible = "socionext,uniphier-sd-v3.1.1"; + status = "disabled"; + reg = <0x5a000000 0x800>; + interrupts = <0 78 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_emmc>; + clocks = <&sd_clk 1>; + reset-names = "host", "hw"; + resets = <&sd_rst 1>, <&sd_rst 6>; + bus-width = <8>; + cap-mmc-highspeed; + cap-mmc-hw-reset; + non-removable; + }; + + sd: sdhc@5a400000 { + compatible = "socionext,uniphier-sd-v3.1.1"; + status = "disabled"; + reg = <0x5a400000 0x800>; + interrupts = <0 76 4>; + pinctrl-names = "default", "uhs"; + pinctrl-0 = <&pinctrl_sd>; + pinctrl-1 = <&pinctrl_sd_uhs>; + clocks = <&sd_clk 0>; + reset-names = "host"; + resets = <&sd_rst 0>; + bus-width = <4>; + cap-sd-highspeed; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + }; + soc_glue: soc-glue@5f800000 { compatible = "socionext,uniphier-pxs2-soc-glue", "simple-mfd", "syscon"; @@ -523,6 +579,186 @@ }; }; + usb0: usb@65a00000 { + compatible = "socionext,uniphier-dwc3", "snps,dwc3"; + status = "disabled"; + reg = <0x65a00000 0xcd00>; + interrupt-names = "host", "peripheral"; + interrupts = <0 134 4>, <0 135 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb0>, <&pinctrl_usb2>; + clock-names = "ref", "bus_early", "suspend"; + clocks = <&sys_clk 14>, <&sys_clk 14>, <&sys_clk 14>; + resets = <&usb0_rst 15>; + phys = <&usb0_hsphy0>, <&usb0_hsphy1>, + <&usb0_ssphy0>, <&usb0_ssphy1>; + dr_mode = "host"; + }; + + usb-glue@65b00000 { + compatible = "socionext,uniphier-pxs2-dwc3-glue", + "simple-mfd"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x65b00000 0x400>; + + usb0_rst: reset@0 { + compatible = "socionext,uniphier-pxs2-usb3-reset"; + reg = <0x0 0x4>; + #reset-cells = <1>; + clock-names = "link"; + clocks = <&sys_clk 14>; + reset-names = "link"; + resets = <&sys_rst 14>; + }; + + usb0_vbus0: regulator@100 { + compatible = "socionext,uniphier-pxs2-usb3-regulator"; + reg = <0x100 0x10>; + clock-names = "link"; + clocks = <&sys_clk 14>; + reset-names = "link"; + resets = <&sys_rst 14>; + }; + + usb0_vbus1: regulator@110 { + compatible = "socionext,uniphier-pxs2-usb3-regulator"; + reg = <0x110 0x10>; + clock-names = "link"; + clocks = <&sys_clk 14>; + reset-names = "link"; + resets = <&sys_rst 14>; + }; + + usb0_hsphy0: hs-phy@200 { + compatible = "socionext,uniphier-pxs2-usb3-hsphy"; + reg = <0x200 0x10>; + #phy-cells = <0>; + clock-names = "link", "phy"; + clocks = <&sys_clk 14>, <&sys_clk 16>; + reset-names = "link", "phy"; + resets = <&sys_rst 14>, <&sys_rst 16>; + vbus-supply = <&usb0_vbus0>; + }; + + usb0_hsphy1: hs-phy@210 { + compatible = "socionext,uniphier-pxs2-usb3-hsphy"; + reg = <0x210 0x10>; + #phy-cells = <0>; + clock-names = "link", "phy"; + clocks = <&sys_clk 14>, <&sys_clk 16>; + reset-names = "link", "phy"; + resets = <&sys_rst 14>, <&sys_rst 16>; + vbus-supply = <&usb0_vbus1>; + }; + + usb0_ssphy0: ss-phy@300 { + compatible = "socionext,uniphier-pxs2-usb3-ssphy"; + reg = <0x300 0x10>; + #phy-cells = <0>; + clock-names = "link", "phy"; + clocks = <&sys_clk 14>, <&sys_clk 17>; + reset-names = "link", "phy"; + resets = <&sys_rst 14>, <&sys_rst 17>; + vbus-supply = <&usb0_vbus0>; + }; + + usb0_ssphy1: ss-phy@310 { + compatible = "socionext,uniphier-pxs2-usb3-ssphy"; + reg = <0x310 0x10>; + #phy-cells = <0>; + clock-names = "link", "phy"; + clocks = <&sys_clk 14>, <&sys_clk 18>; + reset-names = "link", "phy"; + resets = <&sys_rst 14>, <&sys_rst 18>; + vbus-supply = <&usb0_vbus1>; + }; + }; + + usb1: usb@65c00000 { + compatible = "socionext,uniphier-dwc3", "snps,dwc3"; + status = "disabled"; + reg = <0x65c00000 0xcd00>; + interrupt-names = "host", "peripheral"; + interrupts = <0 137 4>, <0 138 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb1>, <&pinctrl_usb3>; + clock-names = "ref", "bus_early", "suspend"; + clocks = <&sys_clk 15>, <&sys_clk 15>, <&sys_clk 15>; + resets = <&usb1_rst 15>; + phys = <&usb1_hsphy0>, <&usb1_hsphy1>, <&usb1_ssphy0>; + dr_mode = "host"; + }; + + usb-glue@65d00000 { + compatible = "socionext,uniphier-pxs2-dwc3-glue", + "simple-mfd"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x65d00000 0x400>; + + usb1_rst: reset@0 { + compatible = "socionext,uniphier-pxs2-usb3-reset"; + reg = <0x0 0x4>; + #reset-cells = <1>; + clock-names = "link"; + clocks = <&sys_clk 15>; + reset-names = "link"; + resets = <&sys_rst 15>; + }; + + usb1_vbus0: regulator@100 { + compatible = "socionext,uniphier-pxs2-usb3-regulator"; + reg = <0x100 0x10>; + clock-names = "link"; + clocks = <&sys_clk 15>; + reset-names = "link"; + resets = <&sys_rst 15>; + }; + + usb1_vbus1: regulator@110 { + compatible = "socionext,uniphier-pxs2-usb3-regulator"; + reg = <0x110 0x10>; + clock-names = "link"; + clocks = <&sys_clk 15>; + reset-names = "link"; + resets = <&sys_rst 15>; + }; + + usb1_hsphy0: hs-phy@200 { + compatible = "socionext,uniphier-pxs2-usb3-hsphy"; + reg = <0x200 0x10>; + #phy-cells = <0>; + clock-names = "link", "phy"; + clocks = <&sys_clk 15>, <&sys_clk 20>; + reset-names = "link", "phy"; + resets = <&sys_rst 15>, <&sys_rst 20>; + vbus-supply = <&usb1_vbus0>; + }; + + usb1_hsphy1: hs-phy@210 { + compatible = "socionext,uniphier-pxs2-usb3-hsphy"; + reg = <0x210 0x10>; + #phy-cells = <0>; + clock-names = "link", "phy"; + clocks = <&sys_clk 15>, <&sys_clk 20>; + reset-names = "link", "phy"; + resets = <&sys_rst 15>, <&sys_rst 20>; + vbus-supply = <&usb1_vbus1>; + }; + + usb1_ssphy0: ss-phy@300 { + compatible = "socionext,uniphier-pxs2-usb3-ssphy"; + reg = <0x300 0x10>; + #phy-cells = <0>; + clock-names = "link", "phy"; + clocks = <&sys_clk 15>, <&sys_clk 21>; + reset-names = "link", "phy"; + resets = <&sys_rst 15>, <&sys_rst 21>; + vbus-supply = <&usb1_vbus0>; + }; + }; + nand: nand@68000000 { compatible = "socionext,uniphier-denali-nand-v5b"; status = "disabled"; @@ -531,7 +767,8 @@ interrupts = <0 65 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_nand2cs>; - clocks = <&sys_clk 2>; + clock-names = "nand", "nand_x", "ecc"; + clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>; resets = <&sys_rst 2>; }; }; diff --git a/dts/src/arm/uniphier-sld8-ref.dts b/dts/src/arm/uniphier-sld8-ref.dts index fe386fa2ea..01bf94c6b9 100644 --- a/dts/src/arm/uniphier-sld8-ref.dts +++ b/dts/src/arm/uniphier-sld8-ref.dts @@ -63,6 +63,10 @@ status = "okay"; }; +&sd { + status = "okay"; +}; + &usb0 { status = "okay"; }; diff --git a/dts/src/arm/uniphier-sld8.dtsi b/dts/src/arm/uniphier-sld8.dtsi index e9b9b4f3c5..f7fcf6b459 100644 --- a/dts/src/arm/uniphier-sld8.dtsi +++ b/dts/src/arm/uniphier-sld8.dtsi @@ -63,6 +63,17 @@ cache-level = <2>; }; + spi: spi@54006000 { + compatible = "socionext,uniphier-scssi"; + status = "disabled"; + reg = <0x54006000 0x100>; + interrupts = <0 39 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi0>; + clocks = <&peri_clk 11>; + resets = <&peri_rst 11>; + }; + serial0: serial@54006800 { compatible = "socionext,uniphier-uart"; status = "disabled"; @@ -228,6 +239,40 @@ }; }; + sd: sdhc@5a400000 { + compatible = "socionext,uniphier-sd-v2.91"; + status = "disabled"; + reg = <0x5a400000 0x200>; + interrupts = <0 76 4>; + pinctrl-names = "default", "uhs"; + pinctrl-0 = <&pinctrl_sd>; + pinctrl-1 = <&pinctrl_sd_uhs>; + clocks = <&mio_clk 0>; + reset-names = "host", "bridge"; + resets = <&mio_rst 0>, <&mio_rst 3>; + bus-width = <4>; + cap-sd-highspeed; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + }; + + emmc: sdhc@5a500000 { + compatible = "socionext,uniphier-sd-v2.91"; + status = "disabled"; + reg = <0x5a500000 0x200>; + interrupts = <0 78 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_emmc>; + clocks = <&mio_clk 1>; + reset-names = "host", "bridge", "hw"; + resets = <&mio_rst 1>, <&mio_rst 4>, <&mio_rst 6>; + bus-width = <8>; + cap-mmc-highspeed; + cap-mmc-hw-reset; + non-removable; + }; + usb0: usb@5a800100 { compatible = "socionext,uniphier-ehci", "generic-ehci"; status = "disabled"; @@ -351,7 +396,8 @@ interrupts = <0 65 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_nand2cs>; - clocks = <&sys_clk 2>; + clock-names = "nand", "nand_x", "ecc"; + clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>; resets = <&sys_rst 2>; }; }; diff --git a/dts/src/arm/versatile-ab.dts b/dts/src/arm/versatile-ab.dts index 5f61d36090..6f4f60ba54 100644 --- a/dts/src/arm/versatile-ab.dts +++ b/dts/src/arm/versatile-ab.dts @@ -373,7 +373,7 @@ clock-names = "apb_pclk"; }; - ssp@101f4000 { + spi@101f4000 { compatible = "arm,pl022", "arm,primecell"; reg = <0x101f4000 0x1000>; interrupts = <11>; diff --git a/dts/src/arm/vf500.dtsi b/dts/src/arm/vf500.dtsi index bbff0115e2..76a0949df4 100644 --- a/dts/src/arm/vf500.dtsi +++ b/dts/src/arm/vf500.dtsi @@ -1,43 +1,6 @@ -/* - * Copyright 2013 Freescale Semiconductor, Inc. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// +// Copyright 2013 Freescale Semiconductor, Inc. #include "vfxxx.dtsi" #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/dts/src/arm/vf610-twr.dts b/dts/src/arm/vf610-twr.dts index 6be7a828ae..59fceea880 100644 --- a/dts/src/arm/vf610-twr.dts +++ b/dts/src/arm/vf610-twr.dts @@ -1,43 +1,6 @@ -/* - * Copyright 2013 Freescale Semiconductor, Inc. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// +// Copyright 2013 Freescale Semiconductor, Inc. /dts-v1/; #include "vf610.dtsi" diff --git a/dts/src/arm/vf610-zii-cfu1.dts b/dts/src/arm/vf610-zii-cfu1.dts index 37777cf22e..b76c3d0413 100644 --- a/dts/src/arm/vf610-zii-cfu1.dts +++ b/dts/src/arm/vf610-zii-cfu1.dts @@ -66,6 +66,15 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; + + sff: sfp { + compatible = "sff,sff"; + pinctrl-0 = <&pinctrl_optical>; + pinctrl-names = "default"; + i2c-bus = <&i2c0>; + los-gpio = <&gpio4 4 GPIO_ACTIVE_HIGH>; + tx-disable-gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; + }; }; &adc0 { @@ -113,6 +122,8 @@ non-removable; no-1-8-v; keep-power-in-suspend; + no-sdio; + no-sd; status = "okay"; }; @@ -120,6 +131,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc1>; bus-width = <4>; + no-sdio; status = "okay"; }; @@ -170,6 +182,14 @@ label = "eth_cu_1000_3"; }; + port@5 { + reg = <5>; + label = "eth_fc_1000_1"; + phy-mode = "1000base-x"; + managed = "in-band-status"; + sfp = <&sff>; + }; + port@6 { reg = <6>; label = "cpu"; @@ -289,6 +309,16 @@ >; }; + pinctrl_optical: optical-grp { + fsl,pins = < + /* SFF SD input */ + VF610_PAD_PTE27__GPIO_132 0x3061 + + /* SFF Transmit disable output */ + VF610_PAD_PTE13__GPIO_118 0x3043 + >; + }; + pinctrl_switch: switch-grp { fsl,pins = < VF610_PAD_PTB28__GPIO_98 0x3061 diff --git a/dts/src/arm/vf610-zii-dev-rev-c.dts b/dts/src/arm/vf610-zii-dev-rev-c.dts index 0b1e94c6f2..6f4a5602ce 100644 --- a/dts/src/arm/vf610-zii-dev-rev-c.dts +++ b/dts/src/arm/vf610-zii-dev-rev-c.dts @@ -200,6 +200,13 @@ phy-handle = <&switch1phy4>; }; + port@9 { + reg = <9>; + label = "sff2"; + phy-mode = "sgmii"; + managed = "in-band-status"; + sfp = <&sff2>; + }; switch1port10: port@10 { reg = <10>; @@ -245,6 +252,22 @@ #size-cells = <0>; }; }; + + sff2: sff2 { + /* lower */ + compatible = "sff,sff"; + i2c-bus = <&sff2_i2c>; + los-gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>; + tx-disable-gpios = <&gpio6 14 GPIO_ACTIVE_HIGH>; + }; + + sff3: sff3 { + /* upper */ + compatible = "sff,sff"; + i2c-bus = <&sff3_i2c>; + los-gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>; + tx-disable-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>; + }; }; &dspi0 { @@ -329,13 +352,6 @@ interrupts = <23 IRQ_TYPE_EDGE_FALLING>; gpio-controller; interrupt-controller; - - enet_swr_en { - gpio-hog; - gpios = <0 GPIO_ACTIVE_HIGH>; - output-high; - line-name = "enet-swr-en"; - }; }; /* @@ -378,26 +394,16 @@ reg = <0>; }; - i2c@1 { + sff2_i2c: i2c@1 { #address-cells = <1>; #size-cells = <0>; reg = <1>; - - sfp2: at24c04@50 { - compatible = "atmel,24c02"; - reg = <0x50>; - }; }; - i2c@2 { + sff3_i2c: i2c@2 { #address-cells = <1>; #size-cells = <0>; reg = <2>; - - sfp3: at24c04@50 { - compatible = "atmel,24c02"; - reg = <0x50>; - }; }; i2c@3 { diff --git a/dts/src/arm/vf610.dtsi b/dts/src/arm/vf610.dtsi index 80fef182c6..7fd39817f8 100644 --- a/dts/src/arm/vf610.dtsi +++ b/dts/src/arm/vf610.dtsi @@ -1,43 +1,7 @@ -/* - * Copyright 2013 Freescale Semiconductor, Inc. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// +// Copyright 2013 Freescale Semiconductor, Inc. + #include "vf500.dtsi" diff --git a/dts/src/arm/vfxxx.dtsi b/dts/src/arm/vfxxx.dtsi index d392794d9c..028e0ec30e 100644 --- a/dts/src/arm/vfxxx.dtsi +++ b/dts/src/arm/vfxxx.dtsi @@ -1,43 +1,6 @@ -/* - * Copyright 2013 Freescale Semiconductor, Inc. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// +// Copyright 2013 Freescale Semiconductor, Inc. #include "vf610-pinfunc.h" #include <dt-bindings/clock/vf610-clock.h> @@ -190,7 +153,7 @@ status = "disabled"; }; - dspi0: dspi0@4002c000 { + dspi0: spi@4002c000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,vf610-dspi"; @@ -205,7 +168,7 @@ status = "disabled"; }; - dspi1: dspi1@4002d000 { + dspi1: spi@4002d000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,vf610-dspi"; @@ -339,7 +302,7 @@ status = "disabled"; }; - qspi0: quadspi@40044000 { + qspi0: spi@40044000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,vf610-qspi"; @@ -569,7 +532,7 @@ status = "disabled"; }; - dspi2: dspi2@400ac000 { + dspi2: spi@400ac000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,vf610-dspi"; @@ -584,7 +547,7 @@ status = "disabled"; }; - dspi3: dspi3@400ad000 { + dspi3: spi@400ad000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,vf610-dspi"; @@ -665,7 +628,7 @@ status = "disabled"; }; - qspi1: quadspi@400c4000 { + qspi1: spi@400c4000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,vf610-qspi"; diff --git a/dts/src/arm/zynq-zc702.dts b/dts/src/arm/zynq-zc702.dts index cc5a3dc2b4..27cd6cb52f 100644 --- a/dts/src/arm/zynq-zc702.dts +++ b/dts/src/arm/zynq-zc702.dts @@ -174,17 +174,17 @@ #address-cells = <1>; #size-cells = <0>; reg = <7>; - hwmon@52 { + hwmon@34 { compatible = "ti,ucd9248"; - reg = <52>; + reg = <0x34>; }; - hwmon@53 { + hwmon@35 { compatible = "ti,ucd9248"; - reg = <53>; + reg = <0x35>; }; - hwmon@54 { + hwmon@36 { compatible = "ti,ucd9248"; - reg = <54>; + reg = <0x36>; }; }; }; diff --git a/dts/src/arm/zynq-zc770-xm010.dts b/dts/src/arm/zynq-zc770-xm010.dts index 0e1bfdd342..0dd352289a 100644 --- a/dts/src/arm/zynq-zc770-xm010.dts +++ b/dts/src/arm/zynq-zc770-xm010.dts @@ -68,7 +68,7 @@ status = "okay"; num-cs = <4>; is-decoded-cs = <0>; - flash@0 { + flash@1 { compatible = "sst25wf080", "jedec,spi-nor"; reg = <1>; spi-max-frequency = <1000000>; diff --git a/dts/src/arm/zynq-zc770-xm013.dts b/dts/src/arm/zynq-zc770-xm013.dts index 651913f1af..4ae2c85df3 100644 --- a/dts/src/arm/zynq-zc770-xm013.dts +++ b/dts/src/arm/zynq-zc770-xm013.dts @@ -62,7 +62,7 @@ status = "okay"; num-cs = <4>; is-decoded-cs = <0>; - eeprom: eeprom@0 { + eeprom: eeprom@2 { at25,byte-len = <8192>; at25,addr-mode = <2>; at25,page-size = <32>; diff --git a/dts/src/arm64/actions/s700-cubieboard7.dts b/dts/src/arm64/actions/s700-cubieboard7.dts index ef79d7905f..28f3f4a0f7 100644 --- a/dts/src/arm64/actions/s700-cubieboard7.dts +++ b/dts/src/arm64/actions/s700-cubieboard7.dts @@ -28,12 +28,6 @@ device_type = "memory"; reg = <0x1 0xe0000000 0x0 0x0>; }; - - uart3_clk: uart3-clk { - compatible = "fixed-clock"; - clock-frequency = <921600>; - #clock-cells = <0>; - }; }; &timer { @@ -42,5 +36,4 @@ &uart3 { status = "okay"; - clocks = <&uart3_clk>; }; diff --git a/dts/src/arm64/actions/s700.dtsi b/dts/src/arm64/actions/s700.dtsi index 66dd5309f0..192c7b39c8 100644 --- a/dts/src/arm64/actions/s700.dtsi +++ b/dts/src/arm64/actions/s700.dtsi @@ -3,6 +3,7 @@ * Copyright (c) 2017 Andreas Färber */ +#include <dt-bindings/clock/actions,s700-cmu.h> #include <dt-bindings/interrupt-controller/arm-gic.h> / { @@ -87,6 +88,12 @@ #clock-cells = <0>; }; + losc: losc { + compatible = "fixed-clock"; + clock-frequency = <32768>; + #clock-cells = <0>; + }; + soc { compatible = "simple-bus"; #address-cells = <2>; @@ -107,6 +114,7 @@ uart0: serial@e0120000 { compatible = "actions,s900-uart", "actions,owl-uart"; reg = <0x0 0xe0120000 0x0 0x2000>; + clocks = <&cmu CLK_UART0>; interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -114,6 +122,7 @@ uart1: serial@e0122000 { compatible = "actions,s900-uart", "actions,owl-uart"; reg = <0x0 0xe0122000 0x0 0x2000>; + clocks = <&cmu CLK_UART1>; interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -121,6 +130,7 @@ uart2: serial@e0124000 { compatible = "actions,s900-uart", "actions,owl-uart"; reg = <0x0 0xe0124000 0x0 0x2000>; + clocks = <&cmu CLK_UART2>; interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -128,6 +138,7 @@ uart3: serial@e0126000 { compatible = "actions,s900-uart", "actions,owl-uart"; reg = <0x0 0xe0126000 0x0 0x2000>; + clocks = <&cmu CLK_UART3>; interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -135,6 +146,7 @@ uart4: serial@e0128000 { compatible = "actions,s900-uart", "actions,owl-uart"; reg = <0x0 0xe0128000 0x0 0x2000>; + clocks = <&cmu CLK_UART4>; interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -142,6 +154,7 @@ uart5: serial@e012a000 { compatible = "actions,s900-uart", "actions,owl-uart"; reg = <0x0 0xe012a000 0x0 0x2000>; + clocks = <&cmu CLK_UART5>; interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -149,10 +162,18 @@ uart6: serial@e012c000 { compatible = "actions,s900-uart", "actions,owl-uart"; reg = <0x0 0xe012c000 0x0 0x2000>; + clocks = <&cmu CLK_UART6>; interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; + cmu: clock-controller@e0168000 { + compatible = "actions,s700-cmu"; + reg = <0x0 0xe0168000 0x0 0x1000>; + clocks = <&hosc>, <&losc>; + #clock-cells = <1>; + }; + sps: power-controller@e01b0100 { compatible = "actions,s700-sps"; reg = <0x0 0xe01b0100 0x0 0x100>; diff --git a/dts/src/arm64/actions/s900-bubblegum-96.dts b/dts/src/arm64/actions/s900-bubblegum-96.dts index 21ca80f994..732daaa6e9 100644 --- a/dts/src/arm64/actions/s900-bubblegum-96.dts +++ b/dts/src/arm64/actions/s900-bubblegum-96.dts @@ -1,7 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2017 Andreas Färber - * - * SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ /dts-v1/; @@ -24,11 +23,223 @@ device_type = "memory"; reg = <0x0 0x0 0x0 0x80000000>; }; +}; + +&i2c0 { + status = "disabled"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_default>; +}; + +&i2c1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_default>; +}; + +&i2c2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_default>; +}; + +/* + * GPIO name legend: proper name = the GPIO line is used as GPIO + * NC = not connected (pin out but not routed from the chip to + * anything the board) + * "[PER]" = pin is muxed for [peripheral] (not GPIO) + * LSEC = Low Speed External Connector + * HSEC = High Speed External Connector + * + * Line names are taken from the schematic "Schematics Bubblegum96" + * version v1.0 + * + * For the lines routed to the external connectors the + * lines are named after the 96Boards CE Specification 1.0, + * Appendix "Expansion Connector Signal Description". + * + * When the 96Boards naming of a line and the schematic name of + * the same line are in conflict, the 96Boards specification + * takes precedence, which means that the external UART on the + * LSEC is named UART0 while the schematic and SoC names this + * UART2. Only exception is the I2C lines for which the schematic + * naming has been preferred. This is only for the informational + * lines i.e. "[FOO]", the GPIO named lines "GPIO-A" thru "GPIO-L" + * are the only ones actually used for GPIO. + */ + +&pinctrl { + gpio-line-names = + "GPIO-A", /* GPIO_0, LSEC pin 23 */ + "GPIO-B", /* GPIO_1, LSEC pin 24 */ + "GPIO-C", /* GPIO_2, LSEC pin 25 */ + "GPIO-D", /* GPIO_3, LSEC pin 26 */ + "GPIO-E", /* GPIO_4, LSEC pin 27 */ + "GPIO-F", /* GPIO_5, LSEC pin 28 */ + "GPIO-G", /* GPIO_6, LSEC pin 29 */ + "GPIO-H", /* GPIO_7, LSEC pin 30 */ + "GPIO-I", /* GPIO_8, LSEC pin 31 */ + "GPIO-J", /* GPIO_9, LSEC pin 32 */ + "NC", /* GPIO_10 */ + "NC", /* GPIO_11 */ + "SIRQ2_1V8", /* GPIO_12 */ + "PCM0_OUT", /* GPIO_13 */ + "WIFI_LED", /* GPIO_14 */ + "PCM0_SYNC", /* GPIO_15 */ + "PCM0_CLK", /* GPIO_16 */ + "PCM0_IN", /* GPIO_17 */ + "BT_LED", /* GPIO_18 */ + "LED0", /* GPIO_19 */ + "LED1", /* GPIO_20 */ + "JTAG_TCK", /* GPIO_21 */ + "JTAG_TMS", /* GPIO_22 */ + "JTAG_TDI", /* GPIO_23 */ + "JTAG_TDO", /* GPIO_24 */ + "[UART1_RxD]", /* GPIO_25, LSEC pin 13 */ + "NC", /* GPIO_26 */ + "[UART1_TxD]", /* GPIO_27, LSEC pin 11 */ + "SD0_D0", /* GPIO_28 */ + "SD0_D1", /* GPIO_29 */ + "SD0_D2", /* GPIO_30 */ + "SD0_D3", /* GPIO_31 */ + "SD1_D0", /* GPIO_32 */ + "SD1_D1", /* GPIO_33 */ + "SD1_D2", /* GPIO_34 */ + "SD1_D3", /* GPIO_35 */ + "SD0_CMD", /* GPIO_36 */ + "SD0_CLK", /* GPIO_37 */ + "SD1_CMD", /* GPIO_38 */ + "SD1_CLK", /* GPIO_39 */ + "SPI0_SCLK", /* GPIO_40, LSEC pin 8 */ + "SPI0_CS", /* GPIO_41, LSEC pin 12 */ + "SPI0_DIN", /* GPIO_42, LSEC pin 10 */ + "SPI0_DOUT", /* GPIO_43, LSEC pin 14 */ + "I2C5_SDATA", /* GPIO_44, HSEC pin 36 */ + "I2C5_SCLK", /* GPIO_45, HSEC pin 38 */ + "UART0_RX", /* GPIO_46, LSEC pin 7 */ + "UART0_TX", /* GPIO_47, LSEC pin 5 */ + "UART0_RTSB", /* GPIO_48, LSEC pin 9 */ + "UART0_CTSB", /* GPIO_49, LSEC pin 3 */ + "I2C4_SCLK", /* GPIO_50, HSEC pin 32 */ + "I2C4_SDATA", /* GPIO_51, HSEC pin 34 */ + "I2C0_SCLK", /* GPIO_52 */ + "I2C0_SDATA", /* GPIO_53 */ + "I2C1_SCLK", /* GPIO_54, LSEC pin 15 */ + "I2C1_SDATA", /* GPIO_55, LSEC pin 17 */ + "I2C2_SCLK", /* GPIO_56, LSEC pin 19 */ + "I2C2_SDATA", /* GPIO_57, LSEC pin 21 */ + "CSI0_DN0", /* GPIO_58, HSEC pin 10 */ + "CSI0_DP0", /* GPIO_59, HSEC pin 8 */ + "CSI0_DN1", /* GPIO_60, HSEC pin 16 */ + "CSI0_DP1", /* GPIO_61, HSEC pin 14 */ + "CSI0_CN", /* GPIO_62, HSEC pin 4 */ + "CSI0_CP", /* GPIO_63, HSEC pin 2 */ + "CSI0_DN2", /* GPIO_64, HSEC pin 22 */ + "CSI0_DP2", /* GPIO_65, HSEC pin 20 */ + "CSI0_DN3", /* GPIO_66, HSEC pin 28 */ + "CSI0_DP3", /* GPIO_67, HSEC pin 26 */ + "[CLK0]", /* GPIO_68, HSEC pin 15 */ + "CSI1_DN0", /* GPIO_69, HSEC pin 44 */ + "CSI1_DP0", /* GPIO_70, HSEC pin 42 */ + "CSI1_DN1", /* GPIO_71, HSEC pin 50 */ + "CSI1_DP1", /* GPIO_72, HSEC pin 48 */ + "CSI1_CN", /* GPIO_73, HSEC pin 56 */ + "CSI1_CP", /* GPIO_74, HSEC pin 54 */ + "[CLK1]", /* GPIO_75, HSEC pin 17 */ + "[GPIOD0]", /* GPIO_76 */ + "[GPIOD1]", /* GPIO_77 */ + "BT_RST_N", /* GPIO_78 */ + "EXT_DC_EN", /* GPIO_79 */ + "[PCM_DI]", /* GPIO_80, LSEC pin 22 */ + "[PCM_DO]", /* GPIO_81, LSEC pin 20 */ + "[PCM_CLK]", /* GPIO_82, LSEC pin 18 */ + "[PCM_FS]", /* GPIO_83, LSEC pin 16 */ + "WAKE_BT", /* GPIO_84 */ + "WL_REG_ON", /* GPIO_85 */ + "NC", /* GPIO_86 */ + "NC", /* GPIO_87 */ + "NC", /* GPIO_88 */ + "NC", /* GPIO_89 */ + "NC", /* GPIO_90 */ + "WIFI_WAKE", /* GPIO_91 */ + "BT_WAKE", /* GPIO_92 */ + "NC", /* GPIO_93 */ + "OTG_EN2", /* GPIO_94 */ + "OTG_EN", /* GPIO_95 */ + "DSI_DP3", /* GPIO_96, HSEC pin 45 */ + "DSI_DN3", /* GPIO_97, HSEC pin 47 */ + "DSI_DP1", /* GPIO_98, HSEC pin 33 */ + "DSI_DN1", /* GPIO_99, HSEC pin 35 */ + "DSI_CP", /* GPIO_100, HSEC pin 21 */ + "DSI_CN", /* GPIO_101, HSEC pin 23 */ + "DSI_DP0", /* GPIO_102, HSEC pin 27 */ + "DSI_DN0", /* GPIO_103, HSEC pin 29 */ + "DSI_DP2", /* GPIO_104, HSEC pin 39 */ + "DSI_DN2", /* GPIO_105, HSEC pin 41 */ + "N0_D0", /* GPIO_106 */ + "N0_D1", /* GPIO_107 */ + "N0_D2", /* GPIO_108 */ + "N0_D3", /* GPIO_109 */ + "N0_D4", /* GPIO_110 */ + "N0_D5", /* GPIO_111 */ + "N0_D6", /* GPIO_112 */ + "N0_D7", /* GPIO_113 */ + "N0_DQS", /* GPIO_114 */ + "N0_DQSN", /* GPIO_115 */ + "NC", /* GPIO_116 */ + "NC", /* GPIO_117 */ + "NC", /* GPIO_118 */ + "N0_CEB1", /* GPIO_119 */ + "CARD_DT", /* GPIO_120 */ + "N0_CEB3", /* GPIO_121 */ + "SD_DAT0", /* GPIO_122, HSEC pin 1 */ + "SD_DAT1", /* GPIO_123, HSEC pin 3 */ + "SD_DAT2", /* GPIO_124, HSEC pin 5 */ + "SD_DAT3", /* GPIO_125, HSEC pin 7 */ + "NC", /* GPIO_126 */ + "NC", /* GPIO_127 */ + "[PWR_BTN_N]", /* GPIO_128, LSEC pin 4 */ + "[RST_BTN_N]", /* GPIO_129, LSEC pin 6 */ + "NC", /* GPIO_130 */ + "SD_CMD", /* GPIO_131 */ + "GPIO-L", /* GPIO_132, LSEC pin 34 */ + "GPIO-K", /* GPIO_133, LSEC pin 33 */ + "NC", /* GPIO_134 */ + "SD_SCLK", /* GPIO_135 */ + "NC", /* GPIO_136 */ + "JTAG_TRST", /* GPIO_137 */ + "I2C3_SCLK", /* GPIO_138 */ + "LED2", /* GPIO_139 */ + "LED3", /* GPIO_140 */ + "I2C3_SDATA", /* GPIO_141 */ + "UART3_RX", /* GPIO_142 */ + "UART3_TX", /* GPIO_143 */ + "UART3_RTSB", /* GPIO_144 */ + "UART3_CTSB"; /* GPIO_145 */ + + i2c0_default: i2c0-default { + pinmux { + groups = "i2c0_mfp"; + function = "i2c0"; + }; + pinconf { + pins = "i2c0_sclk", "i2c0_sdata"; + bias-pull-up; + }; + }; + + i2c1_default: i2c1-default { + pinconf { + pins = "i2c1_sclk", "i2c1_sdata"; + bias-pull-up; + }; + }; - uart5_clk: uart5-clk { - compatible = "fixed-clock"; - clock-frequency = <921600>; - #clock-cells = <0>; + i2c2_default: i2c2-default { + pinconf { + pins = "i2c2_sclk", "i2c2_sdata"; + bias-pull-up; + }; }; }; @@ -38,5 +249,4 @@ &uart5 { status = "okay"; - clocks = <&uart5_clk>; }; diff --git a/dts/src/arm64/actions/s900.dtsi b/dts/src/arm64/actions/s900.dtsi index 11406f6d3a..491ddccc90 100644 --- a/dts/src/arm64/actions/s900.dtsi +++ b/dts/src/arm64/actions/s900.dtsi @@ -1,9 +1,9 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2017 Andreas Färber - * - * SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ +#include <dt-bindings/clock/actions,s900-cmu.h> #include <dt-bindings/interrupt-controller/arm-gic.h> / { @@ -88,6 +88,18 @@ #clock-cells = <0>; }; + losc: losc { + compatible = "fixed-clock"; + clock-frequency = <32768>; + #clock-cells = <0>; + }; + + diff24M: diff24M { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + #clock-cells = <0>; + }; + soc { compatible = "simple-bus"; #address-cells = <2>; @@ -108,6 +120,7 @@ uart0: serial@e0120000 { compatible = "actions,s900-uart", "actions,owl-uart"; reg = <0x0 0xe0120000 0x0 0x2000>; + clocks = <&cmu CLK_UART0>; interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -115,6 +128,7 @@ uart1: serial@e0122000 { compatible = "actions,s900-uart", "actions,owl-uart"; reg = <0x0 0xe0122000 0x0 0x2000>; + clocks = <&cmu CLK_UART1>; interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -122,6 +136,7 @@ uart2: serial@e0124000 { compatible = "actions,s900-uart", "actions,owl-uart"; reg = <0x0 0xe0124000 0x0 0x2000>; + clocks = <&cmu CLK_UART2>; interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -129,6 +144,7 @@ uart3: serial@e0126000 { compatible = "actions,s900-uart", "actions,owl-uart"; reg = <0x0 0xe0126000 0x0 0x2000>; + clocks = <&cmu CLK_UART3>; interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -136,6 +152,7 @@ uart4: serial@e0128000 { compatible = "actions,s900-uart", "actions,owl-uart"; reg = <0x0 0xe0128000 0x0 0x2000>; + clocks = <&cmu CLK_UART4>; interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -143,6 +160,7 @@ uart5: serial@e012a000 { compatible = "actions,s900-uart", "actions,owl-uart"; reg = <0x0 0xe012a000 0x0 0x2000>; + clocks = <&cmu CLK_UART5>; interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -150,15 +168,111 @@ uart6: serial@e012c000 { compatible = "actions,s900-uart", "actions,owl-uart"; reg = <0x0 0xe012c000 0x0 0x2000>; + clocks = <&cmu CLK_UART6>; interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; + sps: power-controller@e012e000 { + compatible = "actions,s900-sps"; + reg = <0x0 0xe012e000 0x0 0x2000>; + #power-domain-cells = <1>; + }; + + cmu: clock-controller@e0160000 { + compatible = "actions,s900-cmu"; + reg = <0x0 0xe0160000 0x0 0x1000>; + clocks = <&hosc>, <&losc>; + #clock-cells = <1>; + }; + + i2c0: i2c@e0170000 { + compatible = "actions,s900-i2c"; + reg = <0 0xe0170000 0 0x1000>; + clocks = <&cmu CLK_I2C0>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@e0172000 { + compatible = "actions,s900-i2c"; + reg = <0 0xe0172000 0 0x1000>; + clocks = <&cmu CLK_I2C1>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@e0174000 { + compatible = "actions,s900-i2c"; + reg = <0 0xe0174000 0 0x1000>; + clocks = <&cmu CLK_I2C2>; + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@e0176000 { + compatible = "actions,s900-i2c"; + reg = <0 0xe0176000 0 0x1000>; + clocks = <&cmu CLK_I2C3>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c4: i2c@e0178000 { + compatible = "actions,s900-i2c"; + reg = <0 0xe0178000 0 0x1000>; + clocks = <&cmu CLK_I2C4>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c5: i2c@e017a000 { + compatible = "actions,s900-i2c"; + reg = <0 0xe017a000 0 0x1000>; + clocks = <&cmu CLK_I2C5>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + pinctrl: pinctrl@e01b0000 { + compatible = "actions,s900-pinctrl"; + reg = <0x0 0xe01b0000 0x0 0x1000>; + clocks = <&cmu CLK_GPIO>; + gpio-controller; + gpio-ranges = <&pinctrl 0 0 146>; + #gpio-cells = <2>; + }; + timer: timer@e0228000 { compatible = "actions,s900-timer"; reg = <0x0 0xe0228000 0x0 0x8000>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "timer1"; }; + + dma: dma-controller@e0260000 { + compatible = "actions,s900-dma"; + reg = <0x0 0xe0260000 0x0 0x1000>; + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + dma-channels = <12>; + dma-requests = <46>; + clocks = <&cmu CLK_DMAC>; + }; }; }; diff --git a/dts/src/arm64/allwinner/sun50i-a64-amarula-relic.dts b/dts/src/arm64/allwinner/sun50i-a64-amarula-relic.dts index eac4793c85..6cb2b7f0c8 100644 --- a/dts/src/arm64/allwinner/sun50i-a64-amarula-relic.dts +++ b/dts/src/arm64/allwinner/sun50i-a64-amarula-relic.dts @@ -203,7 +203,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/dts/src/arm64/allwinner/sun50i-a64-bananapi-m64.dts b/dts/src/arm64/allwinner/sun50i-a64-bananapi-m64.dts index 094cfed13d..ef1c90401b 100644 --- a/dts/src/arm64/allwinner/sun50i-a64-bananapi-m64.dts +++ b/dts/src/arm64/allwinner/sun50i-a64-bananapi-m64.dts @@ -60,6 +60,17 @@ stdout-path = "serial0:115200n8"; }; + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + leds { compatible = "gpio-leds"; @@ -86,6 +97,10 @@ }; }; +&de { + status = "okay"; +}; + &ehci0 { status = "okay"; }; @@ -103,6 +118,17 @@ status = "okay"; }; +&hdmi { + hvcc-supply = <®_dldo1>; + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &i2c1 { pinctrl-names = "default"; pinctrl-0 = <&i2c1_pins>; @@ -151,7 +177,7 @@ &mmc2 { pinctrl-names = "default"; - pinctrl-0 = <&mmc2_pins>; + pinctrl-0 = <&mmc2_pins>, <&mmc2_ds_pin>; vmmc-supply = <®_dcdc1>; bus-width = <8>; non-removable; @@ -302,7 +328,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/dts/src/arm64/allwinner/sun50i-a64-nanopi-a64.dts b/dts/src/arm64/allwinner/sun50i-a64-nanopi-a64.dts index 98dbff19f5..31884dbc88 100644 --- a/dts/src/arm64/allwinner/sun50i-a64-nanopi-a64.dts +++ b/dts/src/arm64/allwinner/sun50i-a64-nanopi-a64.dts @@ -51,12 +51,44 @@ compatible = "friendlyarm,nanopi-a64", "allwinner,sun50i-a64"; aliases { + ethernet0 = &emac; serial0 = &uart0; }; chosen { stdout-path = "serial0:115200n8"; }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + + blue { + label = "nanopi-a64:blue:status"; + gpios = <&pio 3 24 GPIO_ACTIVE_LOW>; /* PD24 */ + }; + }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&rtc 1>; + clock-names = "ext_clock"; + reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */ + }; +}; + +&de { + status = "okay"; }; &ehci0 { @@ -67,6 +99,26 @@ status = "okay"; }; +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>; + phy-mode = "rgmii"; + phy-handle = <&ext_rgmii_phy>; + phy-supply = <®_dcdc1>; + status = "okay"; +}; + +&hdmi { + hvcc-supply = <®_dldo1>; + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + /* i2c1 connected with gpio headers like pine64, bananapi */ &i2c1 { pinctrl-names = "default"; @@ -78,6 +130,13 @@ bias-pull-up; }; +&mdio { + ext_rgmii_phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <7>; + }; +}; + &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins>; @@ -88,6 +147,24 @@ status = "okay"; }; +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + vmmc-supply = <®_dcdc1>; + vqmmc-supply = <®_dldo4>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; + + rtl8189etv: wifi@1 { + reg = <1>; + interrupt-parent = <&r_pio>; + interrupts = <0 3 IRQ_TYPE_LEVEL_LOW>; /* PL3 */ + interrupt-names = "host-wake"; + }; +}; + &ohci0 { status = "okay"; }; @@ -125,9 +202,9 @@ ®_dcdc1 { regulator-always-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "vcc-3v"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-3v3"; }; ®_dcdc2 { @@ -201,7 +278,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/dts/src/arm64/allwinner/sun50i-a64-olinuxino.dts b/dts/src/arm64/allwinner/sun50i-a64-olinuxino.dts index 3f531393ea..f7a4bccaa5 100644 --- a/dts/src/arm64/allwinner/sun50i-a64-olinuxino.dts +++ b/dts/src/arm64/allwinner/sun50i-a64-olinuxino.dts @@ -51,6 +51,7 @@ compatible = "olimex,a64-olinuxino", "allwinner,sun50i-a64"; aliases { + ethernet0 = &emac; serial0 = &uart0; }; @@ -58,12 +59,74 @@ stdout-path = "serial0:115200n8"; }; + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + + reg_usb1_vbus: usb1-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb1-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + enable-active-high; + gpio = <&pio 6 9 GPIO_ACTIVE_HIGH>; /* PG9 */ + status = "okay"; + }; + wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */ }; }; +&de { + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>; + phy-mode = "rgmii"; + phy-handle = <&ext_rgmii_phy>; + phy-supply = <®_dcdc1>; + allwinner,tx-delay-ps = <600>; + status = "okay"; +}; + +&hdmi { + hvcc-supply = <®_dldo1>; + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&mdio { + ext_rgmii_phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; +}; + &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins>; @@ -92,6 +155,14 @@ }; }; +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + &r_rsb { status = "okay"; @@ -100,6 +171,7 @@ reg = <0x3a3>; interrupt-parent = <&r_intc>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + x-powers,drive-vbus-en; /* set N_VBUSEN as output pin */ }; }; @@ -142,10 +214,14 @@ /* DCDC3 is polyphased with DCDC2 */ +/* + * The board uses DDR3L DRAM chips. 1.36V is the closest to the nominal + * 1.35V that the PMIC can drive. + */ ®_dcdc5 { regulator-always-on; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; + regulator-min-microvolt = <1360000>; + regulator-max-microvolt = <1360000>; regulator-name = "vcc-ddr3"; }; @@ -180,6 +256,11 @@ regulator-name = "vcc-wifi-io"; }; +®_drivevbus { + regulator-name = "usb0-vbus"; + status = "okay"; +}; + ®_eldo1 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -220,6 +301,18 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usbphy { status = "okay"; + usb0_id_det-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */ + usb0_vbus-supply = <®_drivevbus>; + usb1_vbus-supply = <®_usb1_vbus>; }; diff --git a/dts/src/arm64/allwinner/sun50i-a64-orangepi-win.dts b/dts/src/arm64/allwinner/sun50i-a64-orangepi-win.dts index 1221764f57..b0c64f7579 100644 --- a/dts/src/arm64/allwinner/sun50i-a64-orangepi-win.dts +++ b/dts/src/arm64/allwinner/sun50i-a64-orangepi-win.dts @@ -1,5 +1,6 @@ /* * Copyright (C) 2017 Jagan Teki <jteki@openedev.com> + * Copyright (C) 2017-2018 Samuel Holland <samuel@sholland.org> * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -51,23 +52,127 @@ compatible = "xunlong,orangepi-win", "allwinner,sun50i-a64"; aliases { + ethernet0 = &emac; serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; + serial4 = &uart4; }; chosen { stdout-path = "serial0:115200n8"; }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + + status { + label = "orangepi:green:status"; + gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */ + }; + }; + + reg_gmac_3v3: gmac-3v3 { + compatible = "regulator-fixed"; + regulator-name = "gmac-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + enable-active-high; + gpio = <&pio 3 14 GPIO_ACTIVE_HIGH>; /* PD14 */ + status = "okay"; + }; + + reg_usb1_vbus: usb1-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb1-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + enable-active-high; + gpio = <&pio 3 7 GPIO_ACTIVE_HIGH>; /* PD7 */ + status = "okay"; + }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>; /* PL8 */ + }; +}; + +&de { + status = "okay"; +}; + +&ehci0 { + status = "okay"; }; &ehci1 { status = "okay"; }; +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>; + phy-mode = "rgmii"; + phy-handle = <&ext_rgmii_phy>; + phy-supply = <®_gmac_3v3>; + status = "okay"; +}; + +&hdmi { + hvcc-supply = <®_dldo1>; + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&mdio { + ext_rgmii_phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; +}; + &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins>; vmmc-supply = <®_dcdc1>; - cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ + disable-wp; + bus-width = <4>; + status = "okay"; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + vmmc-supply = <®_dldo2>; + vqmmc-supply = <®_dldo4>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; +}; + +&ohci0 { status = "okay"; }; @@ -89,9 +194,8 @@ #include "axp803.dtsi" ®_aldo1 { - regulator-always-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; regulator-name = "afvcc-csi"; }; @@ -163,12 +267,23 @@ regulator-name = "vcc-wifi-io"; }; +®_drivevbus { + regulator-name = "usb0-vbus"; + status = "okay"; +}; + ®_eldo1 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-name = "cpvdd"; }; +®_eldo3 { + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1800000>; + regulator-name = "dvdd-csi"; +}; + ®_fldo1 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; @@ -195,13 +310,61 @@ vcc-hdmi-supply = <®_dldo1>; }; +&spi0 { + status = "okay"; + + spi-flash@0 { + compatible = "mxicy,mx25l1606e", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <80000000>; + m25p,fast-read; + status = "okay"; + }; +}; + +/* On debug connector */ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; -&usbphy { +/* Bluetooth */ +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; status = "okay"; }; +/* On Pi-2 connector, RTS/CTS optional */ +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; + status = "disabled"; +}; + +/* On Pi-2 connector, RTS/CTS optional */ +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>; + status = "disabled"; +}; + +/* On Pi-2 connector (labeled for SPI1), RTS/CTS optional */ +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins>; + status = "disabled"; +}; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usbphy { + usb0_id_det-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */ + usb0_vbus-supply = <®_drivevbus>; + usb1_vbus-supply = <®_usb1_vbus>; + status = "okay"; +}; diff --git a/dts/src/arm64/allwinner/sun50i-a64-pine64-lts.dts b/dts/src/arm64/allwinner/sun50i-a64-pine64-lts.dts new file mode 100644 index 0000000000..72d6961dc3 --- /dev/null +++ b/dts/src/arm64/allwinner/sun50i-a64-pine64-lts.dts @@ -0,0 +1,13 @@ +/* + * SPDX-License-Identifier: (GPL-2.0+ OR MIT) + * + * Copyright (c) 2018 ARM Ltd. + */ + +#include "sun50i-a64-sopine-baseboard.dts" + +/ { + model = "Pine64 LTS"; + compatible = "pine64,pine64-lts", "allwinner,sun50i-r18", + "allwinner,sun50i-a64"; +}; diff --git a/dts/src/arm64/allwinner/sun50i-a64-pine64.dts b/dts/src/arm64/allwinner/sun50i-a64-pine64.dts index 1b9b92e541..c077b6c1f4 100644 --- a/dts/src/arm64/allwinner/sun50i-a64-pine64.dts +++ b/dts/src/arm64/allwinner/sun50i-a64-pine64.dts @@ -62,6 +62,21 @@ chosen { stdout-path = "serial0:115200n8"; }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; +}; + +&de { + status = "okay"; }; &ehci0 { @@ -82,6 +97,17 @@ }; +&hdmi { + hvcc-supply = <®_dldo1>; + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &i2c1 { pinctrl-names = "default"; pinctrl-0 = <&i2c1_pins>; @@ -241,7 +267,7 @@ /* On Exp and Euler connectors */ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/dts/src/arm64/allwinner/sun50i-a64-pinebook.dts b/dts/src/arm64/allwinner/sun50i-a64-pinebook.dts index 897e60cbe3..77fac84797 100644 --- a/dts/src/arm64/allwinner/sun50i-a64-pinebook.dts +++ b/dts/src/arm64/allwinner/sun50i-a64-pinebook.dts @@ -80,8 +80,7 @@ pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins>; vmmc-supply = <®_dcdc1>; - cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; - cd-inverted; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; disable-wp; bus-width = <4>; status = "okay"; @@ -104,7 +103,7 @@ &mmc2 { pinctrl-names = "default"; - pinctrl-0 = <&mmc2_pins>; + pinctrl-0 = <&mmc2_pins>, <&mmc2_ds_pin>; vmmc-supply = <®_dcdc1>; vqmmc-supply = <®_eldo1>; bus-width = <8>; @@ -143,7 +142,7 @@ &r_i2c { clock-frequency = <100000>; pinctrl-names = "default"; - pinctrl-0 = <&r_i2c_pins_a>; + pinctrl-0 = <&r_i2c_pl89_pins>; status = "okay"; }; @@ -270,7 +269,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/dts/src/arm64/allwinner/sun50i-a64-sopine-baseboard.dts b/dts/src/arm64/allwinner/sun50i-a64-sopine-baseboard.dts index c21f2331ad..53fcc9098d 100644 --- a/dts/src/arm64/allwinner/sun50i-a64-sopine-baseboard.dts +++ b/dts/src/arm64/allwinner/sun50i-a64-sopine-baseboard.dts @@ -61,6 +61,17 @@ stdout-path = "serial0:115200n8"; }; + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + reg_vcc1v8: vcc1v8 { compatible = "regulator-fixed"; regulator-name = "vcc1v8"; @@ -69,6 +80,10 @@ }; }; +&de { + status = "okay"; +}; + &ehci0 { status = "okay"; }; @@ -86,6 +101,17 @@ status = "okay"; }; +&hdmi { + hvcc-supply = <®_dldo1>; + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &mdio { ext_rgmii_phy: ethernet-phy@1 { compatible = "ethernet-phy-ieee802.3-c22"; @@ -140,7 +166,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/dts/src/arm64/allwinner/sun50i-a64-teres-i.dts b/dts/src/arm64/allwinner/sun50i-a64-teres-i.dts index 81f8e00986..c455b24dd0 100644 --- a/dts/src/arm64/allwinner/sun50i-a64-teres-i.dts +++ b/dts/src/arm64/allwinner/sun50i-a64-teres-i.dts @@ -260,7 +260,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/dts/src/arm64/allwinner/sun50i-a64.dtsi b/dts/src/arm64/allwinner/sun50i-a64.dtsi index d3daf90a87..f3a66f8882 100644 --- a/dts/src/arm64/allwinner/sun50i-a64.dtsi +++ b/dts/src/arm64/allwinner/sun50i-a64.dtsi @@ -88,6 +88,7 @@ device_type = "cpu"; reg = <0>; enable-method = "psci"; + next-level-cache = <&L2>; }; cpu1: cpu@1 { @@ -95,6 +96,7 @@ device_type = "cpu"; reg = <1>; enable-method = "psci"; + next-level-cache = <&L2>; }; cpu2: cpu@2 { @@ -102,6 +104,7 @@ device_type = "cpu"; reg = <2>; enable-method = "psci"; + next-level-cache = <&L2>; }; cpu3: cpu@3 { @@ -109,7 +112,20 @@ device_type = "cpu"; reg = <3>; enable-method = "psci"; + next-level-cache = <&L2>; }; + + L2: l2-cache { + compatible = "cache"; + cache-level = <2>; + }; + }; + + de: display-engine { + compatible = "allwinner,sun50i-a64-display-engine"; + allwinner,pipelines = <&mixer0>, + <&mixer1>; + status = "disabled"; }; osc24M: osc24M_clk { @@ -194,6 +210,52 @@ #clock-cells = <1>; #reset-cells = <1>; }; + + mixer0: mixer@100000 { + compatible = "allwinner,sun50i-a64-de2-mixer-0"; + reg = <0x100000 0x100000>; + clocks = <&display_clocks CLK_BUS_MIXER0>, + <&display_clocks CLK_MIXER0>; + clock-names = "bus", + "mod"; + resets = <&display_clocks RST_MIXER0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + mixer0_out: port@1 { + reg = <1>; + + mixer0_out_tcon0: endpoint { + remote-endpoint = <&tcon0_in_mixer0>; + }; + }; + }; + }; + + mixer1: mixer@200000 { + compatible = "allwinner,sun50i-a64-de2-mixer-1"; + reg = <0x200000 0x100000>; + clocks = <&display_clocks CLK_BUS_MIXER1>, + <&display_clocks CLK_MIXER1>; + clock-names = "bus", + "mod"; + resets = <&display_clocks RST_MIXER1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + mixer1_out: port@1 { + reg = <1>; + + mixer1_out_tcon1: endpoint { + remote-endpoint = <&tcon1_in_mixer1>; + }; + }; + }; + }; }; syscon: syscon@1c00000 { @@ -228,6 +290,75 @@ #dma-cells = <1>; }; + tcon0: lcd-controller@1c0c000 { + compatible = "allwinner,sun50i-a64-tcon-lcd", + "allwinner,sun8i-a83t-tcon-lcd"; + reg = <0x01c0c000 0x1000>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_TCON0>, <&ccu CLK_TCON0>; + clock-names = "ahb", "tcon-ch0"; + clock-output-names = "tcon-pixel-clock"; + resets = <&ccu RST_BUS_TCON0>, <&ccu RST_BUS_LVDS>; + reset-names = "lcd", "lvds"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + tcon0_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + tcon0_in_mixer0: endpoint@0 { + reg = <0>; + remote-endpoint = <&mixer0_out_tcon0>; + }; + }; + + tcon0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + }; + }; + + tcon1: lcd-controller@1c0d000 { + compatible = "allwinner,sun50i-a64-tcon-tv", + "allwinner,sun8i-a83t-tcon-tv"; + reg = <0x01c0d000 0x1000>; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_TCON1>, <&ccu CLK_TCON1>; + clock-names = "ahb", "tcon-ch1"; + resets = <&ccu RST_BUS_TCON1>; + reset-names = "lcd"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + tcon1_in: port@0 { + reg = <0>; + + tcon1_in_mixer1: endpoint { + remote-endpoint = <&mixer1_out_tcon1>; + }; + }; + + tcon1_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + tcon1_out_hdmi: endpoint@1 { + reg = <1>; + remote-endpoint = <&hdmi_in_tcon1>; + }; + }; + }; + }; + mmc0: mmc@1c0f000 { compatible = "allwinner,sun50i-a64-mmc"; reg = <0x01c0f000 0x1000>; @@ -270,6 +401,11 @@ #size-cells = <0>; }; + sid: eeprom@1c14000 { + compatible = "allwinner,sun50i-a64-sid"; + reg = <0x1c14000 0x400>; + }; + usb_otg: usb@1c19000 { compatible = "allwinner,sun8i-a33-musb"; reg = <0x01c19000 0x0400>; @@ -399,7 +535,7 @@ }; mmc2_pins: mmc2-pins { - pins = "PC1", "PC5", "PC6", "PC8", "PC9", + pins = "PC5", "PC6", "PC8", "PC9", "PC10","PC11", "PC12", "PC13", "PC14", "PC15", "PC16"; function = "mmc2"; @@ -407,6 +543,13 @@ bias-pull-up; }; + mmc2_ds_pin: mmc2-ds-pin { + pins = "PC1"; + function = "mmc2"; + drive-strength = <30>; + bias-pull-up; + }; + pwm_pin: pwm_pin { pins = "PD22"; function = "pwm"; @@ -442,7 +585,7 @@ function = "spi1"; }; - uart0_pins_a: uart0 { + uart0_pb_pins: uart0-pb-pins { pins = "PB8", "PB9"; function = "uart0"; }; @@ -686,6 +829,50 @@ status = "disabled"; }; + hdmi: hdmi@1ee0000 { + compatible = "allwinner,sun50i-a64-dw-hdmi", + "allwinner,sun8i-a83t-dw-hdmi"; + reg = <0x01ee0000 0x10000>; + reg-io-width = <1>; + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>, + <&ccu CLK_HDMI>; + clock-names = "iahb", "isfr", "tmds"; + resets = <&ccu RST_BUS_HDMI1>; + reset-names = "ctrl"; + phys = <&hdmi_phy>; + phy-names = "hdmi-phy"; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + hdmi_in: port@0 { + reg = <0>; + + hdmi_in_tcon1: endpoint { + remote-endpoint = <&tcon1_out_hdmi>; + }; + }; + + hdmi_out: port@1 { + reg = <1>; + }; + }; + }; + + hdmi_phy: hdmi-phy@1ef0000 { + compatible = "allwinner,sun50i-a64-hdmi-phy"; + reg = <0x01ef0000 0x10000>; + clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>, + <&ccu 7>; + clock-names = "bus", "mod", "pll-0"; + resets = <&ccu RST_BUS_HDMI0>; + reset-names = "phy"; + #phy-cells = <0>; + }; + rtc: rtc@1f00000 { compatible = "allwinner,sun6i-a31-rtc"; reg = <0x01f00000 0x54>; @@ -749,7 +936,7 @@ interrupt-controller; #interrupt-cells = <3>; - r_i2c_pins_a: i2c-a { + r_i2c_pl89_pins: r-i2c-pl89-pins { pins = "PL8", "PL9"; function = "s_i2c"; }; diff --git a/dts/src/arm64/allwinner/sun50i-h5-bananapi-m2-plus-v1.2.dts b/dts/src/arm64/allwinner/sun50i-h5-bananapi-m2-plus-v1.2.dts new file mode 100644 index 0000000000..2e2b14c0ae --- /dev/null +++ b/dts/src/arm64/allwinner/sun50i-h5-bananapi-m2-plus-v1.2.dts @@ -0,0 +1,11 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (C) 2018 Chen-Yu Tsai <wens@csie.org> + +/dts-v1/; +#include "sun50i-h5.dtsi" +#include <arm/sunxi-bananapi-m2-plus-v1.2.dtsi> + +/ { + model = "Banana Pi BPI-M2-Plus v1.2 H5"; + compatible = "bananapi,bpi-m2-plus-v1.2", "allwinner,sun50i-h5"; +}; diff --git a/dts/src/arm64/allwinner/sun50i-h5-bananapi-m2-plus.dts b/dts/src/arm64/allwinner/sun50i-h5-bananapi-m2-plus.dts new file mode 100644 index 0000000000..77661006df --- /dev/null +++ b/dts/src/arm64/allwinner/sun50i-h5-bananapi-m2-plus.dts @@ -0,0 +1,11 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (C) 2018 Chen-Yu Tsai <wens@csie.org> + +/dts-v1/; +#include "sun50i-h5.dtsi" +#include <arm/sunxi-bananapi-m2-plus.dtsi> + +/ { + model = "Banana Pi BPI-M2-Plus H5"; + compatible = "sinovoip,bpi-m2-plus", "allwinner,sun50i-h5"; +}; diff --git a/dts/src/arm64/allwinner/sun50i-h5.dtsi b/dts/src/arm64/allwinner/sun50i-h5.dtsi index 62d646baac..b41dc1aab6 100644 --- a/dts/src/arm64/allwinner/sun50i-h5.dtsi +++ b/dts/src/arm64/allwinner/sun50i-h5.dtsi @@ -92,6 +92,49 @@ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; }; + + soc { + mali: gpu@1e80000 { + compatible = "allwinner,sun50i-h5-mali", "arm,mali-450"; + reg = <0x01e80000 0x30000>; + /* + * While the datasheet lists an interrupt for the + * PMU, the actual silicon does not have the PMU + * block. Reads all return zero, and writes are + * ignored. + */ + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "gp", + "gpmmu", + "pp", + "pp0", + "ppmmu0", + "pp1", + "ppmmu1", + "pp2", + "ppmmu2", + "pp3", + "ppmmu3", + "pmu"; + clocks = <&ccu CLK_BUS_GPU>, <&ccu CLK_GPU>; + clock-names = "bus", "core"; + resets = <&ccu RST_BUS_GPU>; + + assigned-clocks = <&ccu CLK_GPU>; + assigned-clock-rates = <384000000>; + }; + }; }; &ccu { diff --git a/dts/src/arm64/allwinner/sun50i-h6-orangepi-one-plus.dts b/dts/src/arm64/allwinner/sun50i-h6-orangepi-one-plus.dts new file mode 100644 index 0000000000..0612c19cd9 --- /dev/null +++ b/dts/src/arm64/allwinner/sun50i-h6-orangepi-one-plus.dts @@ -0,0 +1,150 @@ +// SPDX-License-Identifier: (GPL-2.0+ or MIT) +/* + * Copyright (C) 2018 Amarula Solutions + * Author: Jagan Teki <jagan@amarulasolutions.com> + */ + +/dts-v1/; + +#include "sun50i-h6.dtsi" + +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "OrangePi One Plus"; + compatible = "xunlong,orangepi-one-plus", "allwinner,sun50i-h6"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>; + vmmc-supply = <®_cldo1>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; + bus-width = <4>; + status = "okay"; +}; + +&r_i2c { + status = "okay"; + + axp805: pmic@36 { + compatible = "x-powers,axp805", "x-powers,axp806"; + reg = <0x36>; + interrupt-parent = <&r_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + x-powers,self-working-mode; + + regulators { + reg_aldo1: aldo1 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-pl"; + }; + + reg_aldo2: aldo2 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-ac200"; + }; + + reg_aldo3: aldo3 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc25-dram"; + }; + + reg_bldo1: bldo1 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-bias-pll"; + }; + + reg_bldo2: bldo2 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-efuse-pcie-hdmi-io"; + }; + + reg_bldo3: bldo3 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-dcxoio"; + }; + + bldo4 { + /* unused */ + }; + + reg_cldo1: cldo1 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-3v3"; + }; + + reg_cldo2: cldo2 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi-1"; + }; + + reg_cldo3: cldo3 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi-2"; + }; + + reg_dcdca: dcdca { + regulator-always-on; + regulator-min-microvolt = <810000>; + regulator-max-microvolt = <1080000>; + regulator-name = "vdd-cpu"; + }; + + reg_dcdcc: dcdcc { + regulator-min-microvolt = <810000>; + regulator-max-microvolt = <1080000>; + regulator-name = "vdd-gpu"; + }; + + reg_dcdcd: dcdcd { + regulator-always-on; + regulator-min-microvolt = <960000>; + regulator-max-microvolt = <960000>; + regulator-name = "vdd-sys"; + }; + + reg_dcdce: dcdce { + regulator-always-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "vcc-dram"; + }; + + sw { + /* unused */ + }; + }; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_ph_pins>; + status = "okay"; +}; diff --git a/dts/src/arm64/allwinner/sun50i-h6.dtsi b/dts/src/arm64/allwinner/sun50i-h6.dtsi index cfa5fffcf6..040828d2e2 100644 --- a/dts/src/arm64/allwinner/sun50i-h6.dtsi +++ b/dts/src/arm64/allwinner/sun50i-h6.dtsi @@ -92,6 +92,29 @@ #size-cells = <1>; ranges; + syscon: syscon@3000000 { + compatible = "allwinner,sun50i-h6-system-control", + "allwinner,sun50i-a64-system-control"; + reg = <0x03000000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + sram_c: sram@28000 { + compatible = "mmio-sram"; + reg = <0x00028000 0x1e000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x00028000 0x1e000>; + + de2_sram: sram-section@0 { + compatible = "allwinner,sun50i-h6-sram-c", + "allwinner,sun50i-a64-sram-c"; + reg = <0x0000 0x1e000>; + }; + }; + }; + ccu: clock@3001000 { compatible = "allwinner,sun50i-h6-ccu"; reg = <0x03001000 0x1000>; diff --git a/dts/src/arm64/altera/socfpga_stratix10.dtsi b/dts/src/arm64/altera/socfpga_stratix10.dtsi index d033da401c..8253a1a9e9 100644 --- a/dts/src/arm64/altera/socfpga_stratix10.dtsi +++ b/dts/src/arm64/altera/socfpga_stratix10.dtsi @@ -137,6 +137,8 @@ reset-names = "stmmaceth", "stmmaceth-ocp"; clocks = <&clkmgr STRATIX10_EMAC0_CLK>; clock-names = "stmmaceth"; + tx-fifo-depth = <16384>; + rx-fifo-depth = <16384>; status = "disabled"; }; @@ -150,6 +152,8 @@ reset-names = "stmmaceth", "stmmaceth-ocp"; clocks = <&clkmgr STRATIX10_EMAC1_CLK>; clock-names = "stmmaceth"; + tx-fifo-depth = <16384>; + rx-fifo-depth = <16384>; status = "disabled"; }; @@ -163,6 +167,8 @@ reset-names = "stmmaceth", "stmmaceth-ocp"; clocks = <&clkmgr STRATIX10_EMAC2_CLK>; clock-names = "stmmaceth"; + tx-fifo-depth = <16384>; + rx-fifo-depth = <16384>; status = "disabled"; }; @@ -335,7 +341,7 @@ sysmgr: sysmgr@ffd12000 { compatible = "altr,sys-mgr", "syscon"; - reg = <0xffd12000 0x1000>; + reg = <0xffd12000 0x228>; }; /* Local timer */ @@ -467,16 +473,51 @@ status = "disabled"; }; + sdr: sdr@f8011100 { + compatible = "altr,sdr-ctl", "syscon"; + reg = <0xf8011100 0xc0>; + }; + eccmgr { - compatible = "altr,socfpga-s10-ecc-manager"; + compatible = "altr,socfpga-a10-ecc-manager"; + altr,sysmgr-syscon = <&sysmgr>; + #address-cells = <1>; + #size-cells = <1>; interrupts = <0 15 4>, <0 95 4>; interrupt-controller; #interrupt-cells = <2>; + ranges; sdramedac { compatible = "altr,sdram-edac-s10"; + altr,sdr-syscon = <&sdr>; interrupts = <16 4>, <48 4>; }; + + usb0-ecc@ff8c4000 { + compatible = "altr,socfpga-usb-ecc"; + reg = <0xff8c4000 0x100>; + altr,ecc-parent = <&usb0>; + interrupts = <2 4>, + <34 4>; + }; + + emac0-rx-ecc@ff8c0000 { + compatible = "altr,socfpga-eth-mac-ecc"; + reg = <0xff8c0000 0x100>; + altr,ecc-parent = <&gmac0>; + interrupts = <4 4>, + <36 4>; + }; + + emac0-tx-ecc@ff8c0400 { + compatible = "altr,socfpga-eth-mac-ecc"; + reg = <0xff8c0400 0x100>; + altr,ecc-parent = <&gmac0>; + interrupts = <5 4>, + <37 4>; + }; + }; qspi: spi@ff8d2000 { diff --git a/dts/src/arm64/altera/socfpga_stratix10_socdk.dts b/dts/src/arm64/altera/socfpga_stratix10_socdk.dts index 6edc4fa9fd..2e3863ee12 100644 --- a/dts/src/arm64/altera/socfpga_stratix10_socdk.dts +++ b/dts/src/arm64/altera/socfpga_stratix10_socdk.dts @@ -21,6 +21,9 @@ aliases { serial0 = &uart0; + ethernet0 = &gmac0; + ethernet1 = &gmac1; + ethernet2 = &gmac2; }; chosen { @@ -76,7 +79,7 @@ phy-mode = "rgmii"; phy-handle = <&phy0>; - max-frame-size = <3800>; + max-frame-size = <9000>; mdio0 { #address-cells = <1>; @@ -124,6 +127,8 @@ &i2c1 { status = "okay"; clock-frequency = <100000>; + i2c-sda-falling-time-ns = <890>; /* hcnt */ + i2c-sdl-falling-time-ns = <890>; /* lcnt */ adc@14 { compatible = "lltc,ltc2497"; diff --git a/dts/src/arm64/amd/amd-seattle-soc.dtsi b/dts/src/arm64/amd/amd-seattle-soc.dtsi index 125f4deb52..b664e7af74 100644 --- a/dts/src/arm64/amd/amd-seattle-soc.dtsi +++ b/dts/src/arm64/amd/amd-seattle-soc.dtsi @@ -107,7 +107,7 @@ clock-names = "uartclk", "apb_pclk"; }; - spi0: ssp@e1020000 { + spi0: spi@e1020000 { status = "disabled"; compatible = "arm,pl022", "arm,primecell"; reg = <0 0xe1020000 0 0x1000>; @@ -117,7 +117,7 @@ clock-names = "apb_pclk"; }; - spi1: ssp@e1030000 { + spi1: spi@e1030000 { status = "disabled"; compatible = "arm,pl022", "arm,primecell"; reg = <0 0xe1030000 0 0x1000>; diff --git a/dts/src/arm64/amlogic/meson-axg-s400.dts b/dts/src/arm64/amlogic/meson-axg-s400.dts index d5c01427a5..18778ada7b 100644 --- a/dts/src/arm64/amlogic/meson-axg-s400.dts +++ b/dts/src/arm64/amlogic/meson-axg-s400.dts @@ -60,6 +60,55 @@ serial1 = &uart_A; }; + linein: audio-codec@0 { + #sound-dai-cells = <0>; + compatible = "everest,es7241"; + VDDA-supply = <&vcc_3v3>; + VDDP-supply = <&vcc_3v3>; + VDDD-supply = <&vcc_3v3>; + status = "okay"; + sound-name-prefix = "Linein"; + }; + + lineout: audio-codec@1 { + #sound-dai-cells = <0>; + compatible = "everest,es7154"; + VDD-supply = <&vcc_3v3>; + PVDD-supply = <&vcc_5v>; + status = "okay"; + sound-name-prefix = "Lineout"; + }; + + spdif_dit: audio-codec@2 { + #sound-dai-cells = <0>; + compatible = "linux,spdif-dit"; + status = "okay"; + sound-name-prefix = "DIT"; + }; + + dmics: audio-codec@3 { + #sound-dai-cells = <0>; + compatible = "dmic-codec"; + num-channels = <7>; + wakeup-delay-ms = <50>; + status = "okay"; + sound-name-prefix = "MIC"; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x40000000>; + }; + main_12v: regulator-main_12v { compatible = "regulator-fixed"; regulator-name = "12V"; @@ -68,15 +117,26 @@ regulator-always-on; }; - vddio_boot: regulator-vddio_boot { + vcc_3v3: regulator-vcc_3v3 { compatible = "regulator-fixed"; - regulator-name = "VDDIO_BOOT"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; vin-supply = <&vddao_3v3>; regulator-always-on; }; + vcc_5v: regulator-vcc_5v { + compatible = "regulator-fixed"; + regulator-name = "VCC5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&main_12v>; + + gpio = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + vddao_3v3: regulator-vddao_3v3 { compatible = "regulator-fixed"; regulator-name = "VDDAO_3V3"; @@ -95,26 +155,15 @@ regulator-always-on; }; - vcc_3v3: regulator-vcc_3v3 { + vddio_boot: regulator-vddio_boot { compatible = "regulator-fixed"; - regulator-name = "VCC_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; + regulator-name = "VDDIO_BOOT"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; vin-supply = <&vddao_3v3>; regulator-always-on; }; - vcc_5v: regulator-vcc_5v { - compatible = "regulator-fixed"; - regulator-name = "VCC5V"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&main_12v>; - - gpio = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - usb_pwr: regulator-usb_pwr { compatible = "regulator-fixed"; regulator-name = "USB_PWR"; @@ -126,11 +175,6 @@ enable-active-high; }; - emmc_pwrseq: emmc-pwrseq { - compatible = "mmc-pwrseq-emmc"; - reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; - }; - sdio_pwrseq: sdio-pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&gpio GPIOX_7 GPIO_ACTIVE_LOW>; @@ -138,13 +182,6 @@ clock-names = "ext_clock"; }; - wifi32k: wifi32k { - compatible = "pwm-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - pwms = <&pwm_ab 0 30518 0>; /* PWM_A at 32.768KHz */ - }; - speaker-leds { compatible = "gpio-leds"; @@ -179,30 +216,129 @@ }; }; - linein: audio-codec@0 { - #sound-dai-cells = <0>; - compatible = "everest,es7241"; - VDDA-supply = <&vcc_3v3>; - VDDP-supply = <&vcc_3v3>; - VDDD-supply = <&vcc_3v3>; + sound { + compatible = "amlogic,axg-sound-card"; + model = "AXG-S400"; + audio-aux-devs = <&tdmin_a>, <&tdmin_b>, <&tdmin_c>, + <&tdmin_lb>, <&tdmout_c>; + audio-widgets = "Line", "Lineout", + "Line", "Linein", + "Speaker", "Speaker1 Left", + "Speaker", "Speaker1 Right"; + audio-routing = "TDMOUT_C IN 0", "FRDDR_A OUT 2", + "SPDIFOUT IN 0", "FRDDR_A OUT 3", + "TDMOUT_C IN 1", "FRDDR_B OUT 2", + "SPDIFOUT IN 1", "FRDDR_B OUT 3", + "TDMOUT_C IN 2", "FRDDR_C OUT 2", + "SPDIFOUT IN 2", "FRDDR_C OUT 3", + "TDM_C Playback", "TDMOUT_C OUT", + "TDMIN_A IN 2", "TDM_C Capture", + "TDMIN_A IN 5", "TDM_C Loopback", + "TDMIN_B IN 2", "TDM_C Capture", + "TDMIN_B IN 5", "TDM_C Loopback", + "TDMIN_C IN 2", "TDM_C Capture", + "TDMIN_C IN 5", "TDM_C Loopback", + "TDMIN_LB IN 2", "TDM_C Loopback", + "TDMIN_LB IN 5", "TDM_C Capture", + "TODDR_A IN 0", "TDMIN_A OUT", + "TODDR_B IN 0", "TDMIN_A OUT", + "TODDR_C IN 0", "TDMIN_A OUT", + "TODDR_A IN 1", "TDMIN_B OUT", + "TODDR_B IN 1", "TDMIN_B OUT", + "TODDR_C IN 1", "TDMIN_B OUT", + "TODDR_A IN 2", "TDMIN_C OUT", + "TODDR_B IN 2", "TDMIN_C OUT", + "TODDR_C IN 2", "TDMIN_C OUT", + "TODDR_A IN 4", "PDM Capture", + "TODDR_B IN 4", "PDM Capture", + "TODDR_C IN 4", "PDM Capture", + "TODDR_A IN 6", "TDMIN_LB OUT", + "TODDR_B IN 6", "TDMIN_LB OUT", + "TODDR_C IN 6", "TDMIN_LB OUT", + "Lineout", "Lineout AOUTL", + "Lineout", "Lineout AOUTR", + "Speaker1 Left", "SPK1 OUT_A", + "Speaker1 Left", "SPK1 OUT_B", + "Speaker1 Right", "SPK1 OUT_C", + "Speaker1 Right", "SPK1 OUT_D", + "Linein AINL", "Linein", + "Linein AINR", "Linein"; + assigned-clocks = <&clkc CLKID_HIFI_PLL>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <589824000>, + <270950400>, + <393216000>; status = "okay"; - sound-name-prefix = "Linein"; - }; - lineout: audio-codec@1 { - #sound-dai-cells = <0>; - compatible = "everest,es7154"; - VDD-supply = <&vcc_3v3>; - PVDD-supply = <&vcc_5v>; - status = "okay"; - sound-name-prefix = "Lineout"; + dai-link@0 { + sound-dai = <&frddr_a>; + }; + + dai-link@1 { + sound-dai = <&frddr_b>; + }; + + dai-link@2 { + sound-dai = <&frddr_c>; + }; + + dai-link@3 { + sound-dai = <&toddr_a>; + }; + + dai-link@4 { + sound-dai = <&toddr_b>; + }; + + dai-link@5 { + sound-dai = <&toddr_c>; + }; + + dai-link@6 { + sound-dai = <&tdmif_c>; + dai-format = "i2s"; + dai-tdm-slot-tx-mask-2 = <1 1>; + dai-tdm-slot-rx-mask-1 = <1 1>; + mclk-fs = <256>; + + codec@0 { + sound-dai = <&lineout>; + }; + + codec@1 { + sound-dai = <&speaker_amp1>; + }; + + codec@2 { + sound-dai = <&linein>; + }; + + }; + + dai-link@7 { + sound-dai = <&spdifout>; + + codec { + sound-dai = <&spdif_dit>; + }; + }; + + dai-link@8 { + sound-dai = <&pdm>; + + codec { + sound-dai = <&dmics>; + }; + }; }; - spdif_dit: audio-codec@2 { - #sound-dai-cells = <0>; - compatible = "linux,spdif-dit"; - status = "okay"; - sound-name-prefix = "DIT"; + wifi32k: wifi32k { + compatible = "pwm-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + pwms = <&pwm_ab 0 30518 0>; /* PWM_A at 32.768KHz */ }; }; @@ -226,16 +362,16 @@ }; }; -&uart_A { +&frddr_a { status = "okay"; - pinctrl-0 = <&uart_a_pins>; - pinctrl-names = "default"; }; -&uart_AO { +&frddr_b { + status = "okay"; +}; + +&frddr_c { status = "okay"; - pinctrl-0 = <&uart_ao_a_pins>; - pinctrl-names = "default"; }; &ir { @@ -260,6 +396,7 @@ PVDD_B-supply = <&main_12v>; PVDD_C-supply = <&main_12v>; PVDD_D-supply = <&main_12v>; + sound-name-prefix = "SPK1"; }; }; @@ -277,30 +414,22 @@ }; }; +&pdm { + pinctrl-0 = <&pdm_dclk_a14_pins>, <&pdm_din0_pins>, + <&pdm_din1_pins>, <&pdm_din2_pins>, <&pdm_din3_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + &pwm_ab { status = "okay"; pinctrl-0 = <&pwm_a_x20_pins>; pinctrl-names = "default"; }; -/* emmc storage */ -&sd_emmc_c { +&saradc { status = "okay"; - pinctrl-0 = <&emmc_pins>; - pinctrl-1 = <&emmc_clk_gate_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <8>; - cap-sd-highspeed; - cap-mmc-highspeed; - max-frequency = <180000000>; - non-removable; - disable-wp; - mmc-ddr-1_8v; - mmc-hs200-1_8v; - - vmmc-supply = <&vcc_3v3>; - vqmmc-supply = <&vddio_boot>; + vref-supply = <&vddio_ao18>; }; /* wifi module */ @@ -330,7 +459,96 @@ }; }; -&saradc { +/* emmc storage */ +&sd_emmc_c { + status = "disabled"; + pinctrl-0 = <&emmc_pins>; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <8>; + cap-sd-highspeed; + cap-mmc-highspeed; + max-frequency = <180000000>; + non-removable; + disable-wp; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + + mmc-pwrseq = <&emmc_pwrseq>; + + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vddio_boot>; +}; + +&spdifout { + pinctrl-0 = <&spdif_out_a20_pins>; + pinctrl-names = "default"; status = "okay"; - vref-supply = <&vddio_ao18>; +}; + +&tdmif_a { + pinctrl-0 = <&tdma_sclk_pins>, <&tdma_fs_pins>, + <&tdma_din0_pins>, <&tdma_dout0_x15_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&tdmif_b { + pinctrl-0 = <&tdmb_sclk_pins>, <&tdmb_fs_pins>, + <&tdmb_din3_pins>, <&mclk_b_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&tdmif_c { + pinctrl-0 = <&tdmc_sclk_pins>, <&tdmc_fs_pins>, + <&tdmc_din1_pins>, <&tdmc_dout2_pins>, + <&mclk_c_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&tdmin_a { + status = "okay"; +}; + +&tdmin_b { + status = "okay"; +}; + +&tdmin_c { + status = "okay"; +}; + +&tdmin_lb { + status = "okay"; +}; + +&tdmout_c { + status = "okay"; +}; + +&toddr_a { + status = "okay"; +}; + +&toddr_b { + status = "okay"; +}; + +&toddr_c { + status = "okay"; +}; + +&uart_A { + status = "okay"; + pinctrl-0 = <&uart_a_pins>; + pinctrl-names = "default"; +}; + +&uart_AO { + status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; }; diff --git a/dts/src/arm64/amlogic/meson-axg.dtsi b/dts/src/arm64/amlogic/meson-axg.dtsi index c518130e5c..df017dbd2e 100644 --- a/dts/src/arm64/amlogic/meson-axg.dtsi +++ b/dts/src/arm64/amlogic/meson-axg.dtsi @@ -3,13 +3,14 @@ * Copyright (c) 2017 Amlogic, Inc. All rights reserved. */ -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/axg-aoclkc.h> #include <dt-bindings/clock/axg-audio-clkc.h> #include <dt-bindings/clock/axg-clkc.h> -#include <dt-bindings/clock/axg-aoclkc.h> +#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/gpio/meson-axg-gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/reset/amlogic,meson-axg-audio-arb.h> #include <dt-bindings/reset/amlogic,meson-axg-reset.h> / { @@ -19,22 +20,53 @@ #address-cells = <2>; #size-cells = <2>; - reserved-memory { - #address-cells = <2>; - #size-cells = <2>; - ranges; + tdmif_a: audio-controller@0 { + compatible = "amlogic,axg-tdm-iface"; + #sound-dai-cells = <0>; + sound-name-prefix = "TDM_A"; + clocks = <&clkc_audio AUD_CLKID_MST_A_MCLK>, + <&clkc_audio AUD_CLKID_MST_A_SCLK>, + <&clkc_audio AUD_CLKID_MST_A_LRCLK>; + clock-names = "mclk", "sclk", "lrclk"; + status = "disabled"; + }; - /* 16 MiB reserved for Hardware ROM Firmware */ - hwrom_reserved: hwrom@0 { - reg = <0x0 0x0 0x0 0x1000000>; - no-map; - }; + tdmif_b: audio-controller@1 { + compatible = "amlogic,axg-tdm-iface"; + #sound-dai-cells = <0>; + sound-name-prefix = "TDM_B"; + clocks = <&clkc_audio AUD_CLKID_MST_B_MCLK>, + <&clkc_audio AUD_CLKID_MST_B_SCLK>, + <&clkc_audio AUD_CLKID_MST_B_LRCLK>; + clock-names = "mclk", "sclk", "lrclk"; + status = "disabled"; + }; - /* Alternate 3 MiB reserved for ARM Trusted Firmware (BL31) */ - secmon_reserved: secmon@5000000 { - reg = <0x0 0x05000000 0x0 0x300000>; - no-map; - }; + tdmif_c: audio-controller@2 { + compatible = "amlogic,axg-tdm-iface"; + #sound-dai-cells = <0>; + sound-name-prefix = "TDM_C"; + clocks = <&clkc_audio AUD_CLKID_MST_C_MCLK>, + <&clkc_audio AUD_CLKID_MST_C_SCLK>, + <&clkc_audio AUD_CLKID_MST_C_LRCLK>; + clock-names = "mclk", "sclk", "lrclk"; + status = "disabled"; + }; + + ao_alt_xtal: ao_alt_xtal-clk { + compatible = "fixed-clock"; + clock-frequency = <32000000>; + clock-output-names = "ao_alt_xtal"; + #clock-cells = <0>; + }; + + arm-pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; }; cpus { @@ -78,77 +110,27 @@ }; }; - arm-pmu { - compatible = "arm,cortex-a53-pmu"; - interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; - interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; - }; - psci { compatible = "arm,psci-1.0"; method = "smc"; }; - tdmif_a: audio-controller@0 { - compatible = "amlogic,axg-tdm-iface"; - #sound-dai-cells = <0>; - sound-name-prefix = "TDM_A"; - clocks = <&clkc_audio AUD_CLKID_MST_A_MCLK>, - <&clkc_audio AUD_CLKID_MST_A_SCLK>, - <&clkc_audio AUD_CLKID_MST_A_LRCLK>; - clock-names = "mclk", "sclk", "lrclk"; - status = "disabled"; - }; - - tdmif_b: audio-controller@1 { - compatible = "amlogic,axg-tdm-iface"; - #sound-dai-cells = <0>; - sound-name-prefix = "TDM_B"; - clocks = <&clkc_audio AUD_CLKID_MST_B_MCLK>, - <&clkc_audio AUD_CLKID_MST_B_SCLK>, - <&clkc_audio AUD_CLKID_MST_B_LRCLK>; - clock-names = "mclk", "sclk", "lrclk"; - status = "disabled"; - }; - - tdmif_c: audio-controller@2 { - compatible = "amlogic,axg-tdm-iface"; - #sound-dai-cells = <0>; - sound-name-prefix = "TDM_C"; - clocks = <&clkc_audio AUD_CLKID_MST_C_MCLK>, - <&clkc_audio AUD_CLKID_MST_C_SCLK>, - <&clkc_audio AUD_CLKID_MST_C_LRCLK>; - clock-names = "mclk", "sclk", "lrclk"; - status = "disabled"; - }; - - timer { - compatible = "arm,armv8-timer"; - interrupts = <GIC_PPI 13 - (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 14 - (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 11 - (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 10 - (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>; - }; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; - xtal: xtal-clk { - compatible = "fixed-clock"; - clock-frequency = <24000000>; - clock-output-names = "xtal"; - #clock-cells = <0>; - }; + /* 16 MiB reserved for Hardware ROM Firmware */ + hwrom_reserved: hwrom@0 { + reg = <0x0 0x0 0x0 0x1000000>; + no-map; + }; - ao_alt_xtal: ao_alt_xtal-clk { - compatible = "fixed-clock"; - clock-frequency = <32000000>; - clock-output-names = "ao_alt_xtal"; - #clock-cells = <0>; + /* Alternate 3 MiB reserved for ARM Trusted Firmware (BL31) */ + secmon_reserved: secmon@5000000 { + reg = <0x0 0x05000000 0x0 0x300000>; + no-map; + }; }; soc { @@ -157,310 +139,10 @@ #size-cells = <2>; ranges; - apb: apb@ffe00000 { - compatible = "simple-bus"; - reg = <0x0 0xffe00000 0x0 0x200000>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x0 0x0 0xffe00000 0x0 0x200000>; - - sd_emmc_b: sd@5000 { - compatible = "amlogic,meson-axg-mmc"; - reg = <0x0 0x5000 0x0 0x800>; - interrupts = <GIC_SPI 217 IRQ_TYPE_EDGE_RISING>; - status = "disabled"; - clocks = <&clkc CLKID_SD_EMMC_B>, - <&clkc CLKID_SD_EMMC_B_CLK0>, - <&clkc CLKID_FCLK_DIV2>; - clock-names = "core", "clkin0", "clkin1"; - resets = <&reset RESET_SD_EMMC_B>; - }; - - sd_emmc_c: mmc@7000 { - compatible = "amlogic,meson-axg-mmc"; - reg = <0x0 0x7000 0x0 0x800>; - interrupts = <GIC_SPI 218 IRQ_TYPE_EDGE_RISING>; - status = "disabled"; - clocks = <&clkc CLKID_SD_EMMC_C>, - <&clkc CLKID_SD_EMMC_C_CLK0>, - <&clkc CLKID_FCLK_DIV2>; - clock-names = "core", "clkin0", "clkin1"; - resets = <&reset RESET_SD_EMMC_C>; - }; - }; - - audio: bus@ff642000 { - compatible = "simple-bus"; - reg = <0x0 0xff642000 0x0 0x2000>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x0 0x0 0xff642000 0x0 0x2000>; - - clkc_audio: clock-controller@0 { - compatible = "amlogic,axg-audio-clkc"; - reg = <0x0 0x0 0x0 0xb4>; - #clock-cells = <1>; - - clocks = <&clkc CLKID_AUDIO>, - <&clkc CLKID_MPLL0>, - <&clkc CLKID_MPLL1>, - <&clkc CLKID_MPLL2>, - <&clkc CLKID_MPLL3>, - <&clkc CLKID_HIFI_PLL>, - <&clkc CLKID_FCLK_DIV3>, - <&clkc CLKID_FCLK_DIV4>, - <&clkc CLKID_GP0_PLL>; - clock-names = "pclk", - "mst_in0", - "mst_in1", - "mst_in2", - "mst_in3", - "mst_in4", - "mst_in5", - "mst_in6", - "mst_in7"; - - resets = <&reset RESET_AUDIO>; - }; - - arb: reset-controller@280 { - compatible = "amlogic,meson-axg-audio-arb"; - reg = <0x0 0x280 0x0 0x4>; - #reset-cells = <1>; - clocks = <&clkc_audio AUD_CLKID_DDR_ARB>; - }; - - tdmin_a: audio-controller@300 { - compatible = "amlogic,axg-tdmin"; - reg = <0x0 0x300 0x0 0x40>; - sound-name-prefix = "TDMIN_A"; - clocks = <&clkc_audio AUD_CLKID_TDMIN_A>, - <&clkc_audio AUD_CLKID_TDMIN_A_SCLK>, - <&clkc_audio AUD_CLKID_TDMIN_A_SCLK_SEL>, - <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>, - <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>; - clock-names = "pclk", "sclk", "sclk_sel", - "lrclk", "lrclk_sel"; - status = "disabled"; - }; - - tdmin_b: audio-controller@340 { - compatible = "amlogic,axg-tdmin"; - reg = <0x0 0x340 0x0 0x40>; - sound-name-prefix = "TDMIN_B"; - clocks = <&clkc_audio AUD_CLKID_TDMIN_B>, - <&clkc_audio AUD_CLKID_TDMIN_B_SCLK>, - <&clkc_audio AUD_CLKID_TDMIN_B_SCLK_SEL>, - <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>, - <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>; - clock-names = "pclk", "sclk", "sclk_sel", - "lrclk", "lrclk_sel"; - status = "disabled"; - }; - - tdmin_c: audio-controller@380 { - compatible = "amlogic,axg-tdmin"; - reg = <0x0 0x380 0x0 0x40>; - sound-name-prefix = "TDMIN_C"; - clocks = <&clkc_audio AUD_CLKID_TDMIN_C>, - <&clkc_audio AUD_CLKID_TDMIN_C_SCLK>, - <&clkc_audio AUD_CLKID_TDMIN_C_SCLK_SEL>, - <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>, - <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>; - clock-names = "pclk", "sclk", "sclk_sel", - "lrclk", "lrclk_sel"; - status = "disabled"; - }; - - tdmin_lb: audio-controller@3c0 { - compatible = "amlogic,axg-tdmin"; - reg = <0x0 0x3c0 0x0 0x40>; - sound-name-prefix = "TDMIN_LB"; - clocks = <&clkc_audio AUD_CLKID_TDMIN_LB>, - <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK>, - <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK_SEL>, - <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>, - <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>; - clock-names = "pclk", "sclk", "sclk_sel", - "lrclk", "lrclk_sel"; - status = "disabled"; - }; - - spdifout: audio-controller@480 { - compatible = "amlogic,axg-spdifout"; - reg = <0x0 0x480 0x0 0x50>; - #sound-dai-cells = <0>; - sound-name-prefix = "SPDIFOUT"; - clocks = <&clkc_audio AUD_CLKID_SPDIFOUT>, - <&clkc_audio AUD_CLKID_SPDIFOUT_CLK>; - clock-names = "pclk", "mclk"; - status = "disabled"; - }; - - tdmout_a: audio-controller@500 { - compatible = "amlogic,axg-tdmout"; - reg = <0x0 0x500 0x0 0x40>; - sound-name-prefix = "TDMOUT_A"; - clocks = <&clkc_audio AUD_CLKID_TDMOUT_A>, - <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK>, - <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK_SEL>, - <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>, - <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>; - clock-names = "pclk", "sclk", "sclk_sel", - "lrclk", "lrclk_sel"; - status = "disabled"; - }; - - tdmout_b: audio-controller@540 { - compatible = "amlogic,axg-tdmout"; - reg = <0x0 0x540 0x0 0x40>; - sound-name-prefix = "TDMOUT_B"; - clocks = <&clkc_audio AUD_CLKID_TDMOUT_B>, - <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK>, - <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK_SEL>, - <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>, - <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>; - clock-names = "pclk", "sclk", "sclk_sel", - "lrclk", "lrclk_sel"; - status = "disabled"; - }; - - tdmout_c: audio-controller@580 { - compatible = "amlogic,axg-tdmout"; - reg = <0x0 0x580 0x0 0x40>; - sound-name-prefix = "TDMOUT_C"; - clocks = <&clkc_audio AUD_CLKID_TDMOUT_C>, - <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK>, - <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK_SEL>, - <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>, - <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>; - clock-names = "pclk", "sclk", "sclk_sel", - "lrclk", "lrclk_sel"; - status = "disabled"; - }; - }; - - cbus: bus@ffd00000 { - compatible = "simple-bus"; - reg = <0x0 0xffd00000 0x0 0x25000>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x0 0x0 0xffd00000 0x0 0x25000>; - - gpio_intc: interrupt-controller@f080 { - compatible = "amlogic,meson-gpio-intc"; - reg = <0x0 0xf080 0x0 0x10>; - interrupt-controller; - #interrupt-cells = <2>; - amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>; - status = "disabled"; - }; - - pwm_ab: pwm@1b000 { - compatible = "amlogic,meson-axg-ee-pwm"; - reg = <0x0 0x1b000 0x0 0x20>; - #pwm-cells = <3>; - status = "disabled"; - }; - - pwm_cd: pwm@1a000 { - compatible = "amlogic,meson-axg-ee-pwm"; - reg = <0x0 0x1a000 0x0 0x20>; - #pwm-cells = <3>; - status = "disabled"; - }; - - reset: reset-controller@1004 { - compatible = "amlogic,meson-axg-reset"; - reg = <0x0 0x01004 0x0 0x9c>; - #reset-cells = <1>; - }; - - spicc0: spi@13000 { - compatible = "amlogic,meson-axg-spicc"; - reg = <0x0 0x13000 0x0 0x3c>; - interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clkc CLKID_SPICC0>; - clock-names = "core"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - spicc1: spi@15000 { - compatible = "amlogic,meson-axg-spicc"; - reg = <0x0 0x15000 0x0 0x3c>; - interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clkc CLKID_SPICC1>; - clock-names = "core"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - i2c0: i2c@1f000 { - compatible = "amlogic,meson-axg-i2c"; - reg = <0x0 0x1f000 0x0 0x20>; - interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>; - clocks = <&clkc CLKID_I2C>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - i2c1: i2c@1e000 { - compatible = "amlogic,meson-axg-i2c"; - reg = <0x0 0x1e000 0x0 0x20>; - interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>; - clocks = <&clkc CLKID_I2C>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - i2c2: i2c@1d000 { - compatible = "amlogic,meson-axg-i2c"; - reg = <0x0 0x1d000 0x0 0x20>; - interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>; - clocks = <&clkc CLKID_I2C>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - i2c3: i2c@1c000 { - compatible = "amlogic,meson-axg-i2c"; - reg = <0x0 0x1c000 0x0 0x20>; - interrupts = <GIC_SPI 39 IRQ_TYPE_EDGE_RISING>; - clocks = <&clkc CLKID_I2C>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - uart_A: serial@24000 { - compatible = "amlogic,meson-gx-uart"; - reg = <0x0 0x24000 0x0 0x18>; - interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>; - status = "disabled"; - clocks = <&xtal>, <&clkc CLKID_UART0>, <&xtal>; - clock-names = "xtal", "pclk", "baud"; - }; - - uart_B: serial@23000 { - compatible = "amlogic,meson-gx-uart"; - reg = <0x0 0x23000 0x0 0x18>; - interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>; - status = "disabled"; - clocks = <&xtal>, <&clkc CLKID_UART1>, <&xtal>; - clock-names = "xtal", "pclk", "baud"; - }; - }; - ethmac: ethernet@ff3f0000 { - compatible = "amlogic,meson-gxbb-dwmac", "snps,dwmac"; + compatible = "amlogic,meson-axg-dwmac", "snps,dwmac"; reg = <0x0 0xff3f0000 0x0 0x10000 - 0x0 0xff634540 0x0 0x8>; + 0x0 0xff634540 0x0 0x8>; interrupts = <GIC_SPI 8 IRQ_TYPE_EDGE_RISING>; interrupt-names = "macirq"; clocks = <&clkc CLKID_ETH>, @@ -470,54 +152,26 @@ status = "disabled"; }; - gic: interrupt-controller@ffc01000 { - compatible = "arm,gic-400"; - reg = <0x0 0xffc01000 0 0x1000>, - <0x0 0xffc02000 0 0x2000>, - <0x0 0xffc04000 0 0x2000>, - <0x0 0xffc06000 0 0x2000>; - interrupt-controller; - interrupts = <GIC_PPI 9 - (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>; - #interrupt-cells = <3>; - #address-cells = <0>; - }; - - hiubus: bus@ff63c000 { - compatible = "simple-bus"; - reg = <0x0 0xff63c000 0x0 0x1c00>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x0 0x0 0xff63c000 0x0 0x1c00>; - - sysctrl: system-controller@0 { - compatible = "amlogic,meson-axg-hhi-sysctrl", "syscon", "simple-mfd"; - reg = <0 0 0 0x400>; - - clkc: clock-controller { - compatible = "amlogic,axg-clkc"; - #clock-cells = <1>; - }; - }; - }; - - mailbox: mailbox@ff63dc00 { - compatible = "amlogic,meson-gx-mhu", "amlogic,meson-gxbb-mhu"; - reg = <0 0xff63dc00 0 0x400>; - interrupts = <GIC_SPI 208 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 209 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 210 IRQ_TYPE_EDGE_RISING>; - #mbox-cells = <1>; + pdm: audio-controller@ff632000 { + compatible = "amlogic,axg-pdm"; + reg = <0x0 0xff632000 0x0 0x34>; + #sound-dai-cells = <0>; + sound-name-prefix = "PDM"; + clocks = <&clkc_audio AUD_CLKID_PDM>, + <&clkc_audio AUD_CLKID_PDM_DCLK>, + <&clkc_audio AUD_CLKID_PDM_SYSCLK>; + clock-names = "pclk", "dclk", "sysclk"; + status = "disabled"; }; - periphs: periphs@ff634000 { + periphs: bus@ff634000 { compatible = "simple-bus"; reg = <0x0 0xff634000 0x0 0x2000>; #address-cells = <2>; #size-cells = <2>; ranges = <0x0 0x0 0x0 0xff634000 0x0 0x2000>; - hwrng: rng { + hwrng: rng@18 { compatible = "amlogic,meson-rng"; reg = <0x0 0x18 0x0 0x4>; clocks = <&clkc CLKID_RNG0>; @@ -532,28 +186,92 @@ gpio: bank@480 { reg = <0x0 0x00480 0x0 0x40>, - <0x0 0x004e8 0x0 0x14>, - <0x0 0x00520 0x0 0x14>, - <0x0 0x00430 0x0 0x3c>; + <0x0 0x004e8 0x0 0x14>, + <0x0 0x00520 0x0 0x14>, + <0x0 0x00430 0x0 0x3c>; reg-names = "mux", "pull", "pull-enable", "gpio"; gpio-controller; #gpio-cells = <2>; gpio-ranges = <&pinctrl_periphs 0 0 86>; }; + i2c0_pins: i2c0 { + mux { + groups = "i2c0_sck", + "i2c0_sda"; + function = "i2c0"; + }; + }; + + i2c1_x_pins: i2c1_x { + mux { + groups = "i2c1_sck_x", + "i2c1_sda_x"; + function = "i2c1"; + }; + }; + + i2c1_z_pins: i2c1_z { + mux { + groups = "i2c1_sck_z", + "i2c1_sda_z"; + function = "i2c1"; + }; + }; + + i2c2_a_pins: i2c2_a { + mux { + groups = "i2c2_sck_a", + "i2c2_sda_a"; + function = "i2c2"; + }; + }; + + i2c2_x_pins: i2c2_x { + mux { + groups = "i2c2_sck_x", + "i2c2_sda_x"; + function = "i2c2"; + }; + }; + + i2c3_a6_pins: i2c3_a6 { + mux { + groups = "i2c3_sda_a6", + "i2c3_sck_a7"; + function = "i2c3"; + }; + }; + + i2c3_a12_pins: i2c3_a12 { + mux { + groups = "i2c3_sda_a12", + "i2c3_sck_a13"; + function = "i2c3"; + }; + }; + + i2c3_a19_pins: i2c3_a19 { + mux { + groups = "i2c3_sda_a19", + "i2c3_sck_a20"; + function = "i2c3"; + }; + }; + emmc_pins: emmc { mux { groups = "emmc_nand_d0", - "emmc_nand_d1", - "emmc_nand_d2", - "emmc_nand_d3", - "emmc_nand_d4", - "emmc_nand_d5", - "emmc_nand_d6", - "emmc_nand_d7", - "emmc_clk", - "emmc_cmd", - "emmc_ds"; + "emmc_nand_d1", + "emmc_nand_d2", + "emmc_nand_d3", + "emmc_nand_d4", + "emmc_nand_d5", + "emmc_nand_d6", + "emmc_nand_d7", + "emmc_clk", + "emmc_cmd", + "emmc_ds"; function = "emmc"; }; }; @@ -569,40 +287,57 @@ }; }; - sdio_pins: sdio { + eth_rgmii_x_pins: eth-x-rgmii { mux { - groups = "sdio_d0", - "sdio_d1", - "sdio_d2", - "sdio_d3", - "sdio_cmd", - "sdio_clk"; - function = "sdio"; + groups = "eth_mdio_x", + "eth_mdc_x", + "eth_rgmii_rx_clk_x", + "eth_rx_dv_x", + "eth_rxd0_x", + "eth_rxd1_x", + "eth_rxd2_rgmii", + "eth_rxd3_rgmii", + "eth_rgmii_tx_clk", + "eth_txen_x", + "eth_txd0_x", + "eth_txd1_x", + "eth_txd2_rgmii", + "eth_txd3_rgmii"; + function = "eth"; }; }; - sdio_clk_gate_pins: sdio_clk_gate { + eth_rgmii_y_pins: eth-y-rgmii { mux { - groups = "GPIOX_4"; - function = "gpio_periphs"; - }; - cfg-pull-down { - pins = "GPIOX_4"; - bias-pull-down; + groups = "eth_mdio_y", + "eth_mdc_y", + "eth_rgmii_rx_clk_y", + "eth_rx_dv_y", + "eth_rxd0_y", + "eth_rxd1_y", + "eth_rxd2_rgmii", + "eth_rxd3_rgmii", + "eth_rgmii_tx_clk", + "eth_txen_y", + "eth_txd0_y", + "eth_txd1_y", + "eth_txd2_rgmii", + "eth_txd3_rgmii"; + function = "eth"; }; }; eth_rmii_x_pins: eth-x-rmii { mux { groups = "eth_mdio_x", - "eth_mdc_x", - "eth_rgmii_rx_clk_x", - "eth_rx_dv_x", - "eth_rxd0_x", - "eth_rxd1_x", - "eth_txen_x", - "eth_txd0_x", - "eth_txd1_x"; + "eth_mdc_x", + "eth_rgmii_rx_clk_x", + "eth_rx_dv_x", + "eth_rxd0_x", + "eth_rxd1_x", + "eth_txen_x", + "eth_txd0_x", + "eth_txd1_x"; function = "eth"; }; }; @@ -610,55 +345,29 @@ eth_rmii_y_pins: eth-y-rmii { mux { groups = "eth_mdio_y", - "eth_mdc_y", - "eth_rgmii_rx_clk_y", - "eth_rx_dv_y", - "eth_rxd0_y", - "eth_rxd1_y", - "eth_txen_y", - "eth_txd0_y", - "eth_txd1_y"; + "eth_mdc_y", + "eth_rgmii_rx_clk_y", + "eth_rx_dv_y", + "eth_rxd0_y", + "eth_rxd1_y", + "eth_txen_y", + "eth_txd0_y", + "eth_txd1_y"; function = "eth"; }; }; - eth_rgmii_x_pins: eth-x-rgmii { + mclk_b_pins: mclk_b { mux { - groups = "eth_mdio_x", - "eth_mdc_x", - "eth_rgmii_rx_clk_x", - "eth_rx_dv_x", - "eth_rxd0_x", - "eth_rxd1_x", - "eth_rxd2_rgmii", - "eth_rxd3_rgmii", - "eth_rgmii_tx_clk", - "eth_txen_x", - "eth_txd0_x", - "eth_txd1_x", - "eth_txd2_rgmii", - "eth_txd3_rgmii"; - function = "eth"; + groups = "mclk_b"; + function = "mclk_b"; }; }; - eth_rgmii_y_pins: eth-y-rgmii { + mclk_c_pins: mclk_c { mux { - groups = "eth_mdio_y", - "eth_mdc_y", - "eth_rgmii_rx_clk_y", - "eth_rx_dv_y", - "eth_rxd0_y", - "eth_rxd1_y", - "eth_rxd2_rgmii", - "eth_rxd3_rgmii", - "eth_rgmii_tx_clk", - "eth_txen_y", - "eth_txd0_y", - "eth_txd1_y", - "eth_txd2_rgmii", - "eth_txd3_rgmii"; - function = "eth"; + groups = "mclk_c"; + function = "mclk_c"; }; }; @@ -788,6 +497,29 @@ }; }; + sdio_pins: sdio { + mux { + groups = "sdio_d0", + "sdio_d1", + "sdio_d2", + "sdio_d3", + "sdio_cmd", + "sdio_clk"; + function = "sdio"; + }; + }; + + sdio_clk_gate_pins: sdio_clk_gate { + mux { + groups = "GPIOX_4"; + function = "gpio_periphs"; + }; + cfg-pull-down { + pins = "GPIOX_4"; + bias-pull-down; + }; + }; + spdif_in_z_pins: spdif_in_z { mux { groups = "spdif_in_z"; @@ -823,13 +555,6 @@ }; }; - spdif_out_z_pins: spdif_out_z { - mux { - groups = "spdif_out_z"; - function = "spdif_out"; - }; - }; - spdif_out_a1_pins: spdif_out_a1 { mux { groups = "spdif_out_a1"; @@ -858,11 +583,18 @@ }; }; + spdif_out_z_pins: spdif_out_z { + mux { + groups = "spdif_out_z"; + function = "spdif_out"; + }; + }; + spi0_pins: spi0 { mux { groups = "spi0_miso", - "spi0_mosi", - "spi0_clk"; + "spi0_mosi", + "spi0_clk"; function = "spi0"; }; }; @@ -888,12 +620,11 @@ }; }; - spi1_a_pins: spi1_a { mux { groups = "spi1_miso_a", - "spi1_mosi_a", - "spi1_clk_a"; + "spi1_mosi_a", + "spi1_clk_a"; function = "spi1"; }; }; @@ -915,8 +646,8 @@ spi1_x_pins: spi1_x { mux { groups = "spi1_miso_x", - "spi1_mosi_x", - "spi1_clk_x"; + "spi1_mosi_x", + "spi1_clk_x"; function = "spi1"; }; }; @@ -928,145 +659,52 @@ }; }; - i2c0_pins: i2c0 { - mux { - groups = "i2c0_sck", - "i2c0_sda"; - function = "i2c0"; - }; - }; - - i2c1_z_pins: i2c1_z { - mux { - groups = "i2c1_sck_z", - "i2c1_sda_z"; - function = "i2c1"; - }; - }; - - i2c1_x_pins: i2c1_x { - mux { - groups = "i2c1_sck_x", - "i2c1_sda_x"; - function = "i2c1"; - }; - }; - - i2c2_x_pins: i2c2_x { - mux { - groups = "i2c2_sck_x", - "i2c2_sda_x"; - function = "i2c2"; - }; - }; - - i2c2_a_pins: i2c2_a { - mux { - groups = "i2c2_sck_a", - "i2c2_sda_a"; - function = "i2c2"; - }; - }; - - i2c3_a6_pins: i2c3_a6 { - mux { - groups = "i2c3_sda_a6", - "i2c3_sck_a7"; - function = "i2c3"; - }; - }; - - i2c3_a12_pins: i2c3_a12 { - mux { - groups = "i2c3_sda_a12", - "i2c3_sck_a13"; - function = "i2c3"; - }; - }; - - i2c3_a19_pins: i2c3_a19 { - mux { - groups = "i2c3_sda_a19", - "i2c3_sck_a20"; - function = "i2c3"; - }; - }; - - uart_a_pins: uart_a { - mux { - groups = "uart_tx_a", - "uart_rx_a"; - function = "uart_a"; - }; - }; - - uart_a_cts_rts_pins: uart_a_cts_rts { - mux { - groups = "uart_cts_a", - "uart_rts_a"; - function = "uart_a"; - }; - }; - - uart_b_x_pins: uart_b_x { - mux { - groups = "uart_tx_b_x", - "uart_rx_b_x"; - function = "uart_b"; - }; - }; - - uart_b_x_cts_rts_pins: uart_b_x_cts_rts { + tdma_din0_pins: tdma_din0 { mux { - groups = "uart_cts_b_x", - "uart_rts_b_x"; - function = "uart_b"; + groups = "tdma_din0"; + function = "tdma"; }; }; - uart_b_z_pins: uart_b_z { + tdma_dout0_x14_pins: tdma_dout0_x14 { mux { - groups = "uart_tx_b_z", - "uart_rx_b_z"; - function = "uart_b"; + groups = "tdma_dout0_x14"; + function = "tdma"; }; }; - uart_b_z_cts_rts_pins: uart_b_z_cts_rts { + tdma_dout0_x15_pins: tdma_dout0_x15 { mux { - groups = "uart_cts_b_z", - "uart_rts_b_z"; - function = "uart_b"; + groups = "tdma_dout0_x15"; + function = "tdma"; }; }; - uart_ao_b_z_pins: uart_ao_b_z { + tdma_dout1_pins: tdma_dout1 { mux { - groups = "uart_ao_tx_b_z", - "uart_ao_rx_b_z"; - function = "uart_ao_b_z"; + groups = "tdma_dout1"; + function = "tdma"; }; }; - uart_ao_b_z_cts_rts_pins: uart_ao_b_z_cts_rts { + tdma_din1_pins: tdma_din1 { mux { - groups = "uart_ao_cts_b_z", - "uart_ao_rts_b_z"; - function = "uart_ao_b_z"; + groups = "tdma_din1"; + function = "tdma"; }; }; - mclk_b_pins: mclk_b { + tdma_fs_pins: tdma_fs { mux { - groups = "mclk_b"; - function = "mclk_b"; + groups = "tdma_fs"; + function = "tdma"; }; }; - mclk_c_pins: mclk_c { + tdma_fs_slv_pins: tdma_fs_slv { mux { - groups = "mclk_c"; - function = "mclk_c"; + groups = "tdma_fs_slv"; + function = "tdma"; }; }; @@ -1084,65 +722,58 @@ }; }; - tdma_fs_pins: tdma_fs { - mux { - groups = "tdma_fs"; - function = "tdma"; - }; - }; - - tdma_fs_slv_pins: tdma_fs_slv { + tdmb_din0_pins: tdmb_din0 { mux { - groups = "tdma_fs_slv"; - function = "tdma"; + groups = "tdmb_din0"; + function = "tdmb"; }; }; - tdma_din0_pins: tdma_din0 { + tdmb_din1_pins: tdmb_din1 { mux { - groups = "tdma_din0"; - function = "tdma"; + groups = "tdmb_din1"; + function = "tdmb"; }; }; - tdma_dout0_x14_pins: tdma_dout0_x14 { + tdmb_din2_pins: tdmb_din2 { mux { - groups = "tdma_dout0_x14"; - function = "tdma"; + groups = "tdmb_din2"; + function = "tdmb"; }; }; - tdma_dout0_x15_pins: tdma_dout0_x15 { + tdmb_din3_pins: tdmb_din3 { mux { - groups = "tdma_dout0_x15"; - function = "tdma"; + groups = "tdmb_din3"; + function = "tdmb"; }; }; - tdma_dout1_pins: tdma_dout1 { + tdmb_dout0_pins: tdmb_dout0 { mux { - groups = "tdma_dout1"; - function = "tdma"; + groups = "tdmb_dout0"; + function = "tdmb"; }; }; - tdma_din1_pins: tdma_din1 { + tdmb_dout1_pins: tdmb_dout1 { mux { - groups = "tdma_din1"; - function = "tdma"; + groups = "tdmb_dout1"; + function = "tdmb"; }; }; - tdmb_sclk_pins: tdmb_sclk { + tdmb_dout2_pins: tdmb_dout2 { mux { - groups = "tdmb_sclk"; + groups = "tdmb_dout2"; function = "tdmb"; }; }; - tdmb_sclk_slv_pins: tdmb_sclk_slv { + tdmb_dout3_pins: tdmb_dout3 { mux { - groups = "tdmb_sclk_slv"; + groups = "tdmb_dout3"; function = "tdmb"; }; }; @@ -1161,163 +792,412 @@ }; }; - tdmb_din0_pins: tdmb_din0 { + tdmb_sclk_pins: tdmb_sclk { mux { - groups = "tdmb_din0"; + groups = "tdmb_sclk"; function = "tdmb"; }; }; - tdmb_dout0_pins: tdmb_dout0 { + tdmb_sclk_slv_pins: tdmb_sclk_slv { mux { - groups = "tdmb_dout0"; + groups = "tdmb_sclk_slv"; function = "tdmb"; }; }; - tdmb_din1_pins: tdmb_din1 { + tdmc_fs_pins: tdmc_fs { mux { - groups = "tdmb_din1"; - function = "tdmb"; + groups = "tdmc_fs"; + function = "tdmc"; }; }; - tdmb_dout1_pins: tdmb_dout1 { + tdmc_fs_slv_pins: tdmc_fs_slv { mux { - groups = "tdmb_dout1"; - function = "tdmb"; + groups = "tdmc_fs_slv"; + function = "tdmc"; }; }; - tdmb_din2_pins: tdmb_din2 { + tdmc_sclk_pins: tdmc_sclk { mux { - groups = "tdmb_din2"; - function = "tdmb"; + groups = "tdmc_sclk"; + function = "tdmc"; }; }; - tdmb_dout2_pins: tdmb_dout2 { + tdmc_sclk_slv_pins: tdmc_sclk_slv { mux { - groups = "tdmb_dout2"; - function = "tdmb"; + groups = "tdmc_sclk_slv"; + function = "tdmc"; }; }; - tdmb_din3_pins: tdmb_din3 { + tdmc_din0_pins: tdmc_din0 { mux { - groups = "tdmb_din3"; - function = "tdmb"; + groups = "tdmc_din0"; + function = "tdmc"; }; }; - tdmb_dout3_pins: tdmb_dout3 { + tdmc_din1_pins: tdmc_din1 { mux { - groups = "tdmb_dout3"; - function = "tdmb"; + groups = "tdmc_din1"; + function = "tdmc"; }; }; - tdmc_sclk_pins: tdmc_sclk { + tdmc_din2_pins: tdmc_din2 { mux { - groups = "tdmc_sclk"; + groups = "tdmc_din2"; function = "tdmc"; }; }; - tdmc_sclk_slv_pins: tdmc_sclk_slv { + tdmc_din3_pins: tdmc_din3 { mux { - groups = "tdmc_sclk_slv"; + groups = "tdmc_din3"; function = "tdmc"; }; }; - tdmc_fs_pins: tdmc_fs { + tdmc_dout0_pins: tdmc_dout0 { mux { - groups = "tdmc_fs"; + groups = "tdmc_dout0"; function = "tdmc"; }; }; - tdmc_fs_slv_pins: tdmc_fs_slv { + tdmc_dout1_pins: tdmc_dout1 { mux { - groups = "tdmc_fs_slv"; + groups = "tdmc_dout1"; function = "tdmc"; }; }; - tdmc_din0_pins: tdmc_din0 { + tdmc_dout2_pins: tdmc_dout2 { mux { - groups = "tdmc_din0"; + groups = "tdmc_dout2"; function = "tdmc"; }; }; - tdmc_dout0_pins: tdmc_dout0 { + tdmc_dout3_pins: tdmc_dout3 { mux { - groups = "tdmc_dout0"; + groups = "tdmc_dout3"; function = "tdmc"; }; }; - tdmc_din1_pins: tdmc_din1 { + uart_a_pins: uart_a { mux { - groups = "tdmc_din1"; - function = "tdmc"; + groups = "uart_tx_a", + "uart_rx_a"; + function = "uart_a"; }; }; - tdmc_dout1_pins: tdmc_dout1 { + uart_a_cts_rts_pins: uart_a_cts_rts { mux { - groups = "tdmc_dout1"; - function = "tdmc"; + groups = "uart_cts_a", + "uart_rts_a"; + function = "uart_a"; }; }; - tdmc_din2_pins: tdmc_din2 { + uart_b_x_pins: uart_b_x { mux { - groups = "tdmc_din2"; - function = "tdmc"; + groups = "uart_tx_b_x", + "uart_rx_b_x"; + function = "uart_b"; }; }; - tdmc_dout2_pins: tdmc_dout2 { + uart_b_x_cts_rts_pins: uart_b_x_cts_rts { mux { - groups = "tdmc_dout2"; - function = "tdmc"; + groups = "uart_cts_b_x", + "uart_rts_b_x"; + function = "uart_b"; }; }; - tdmc_din3_pins: tdmc_din3 { + uart_b_z_pins: uart_b_z { mux { - groups = "tdmc_din3"; - function = "tdmc"; + groups = "uart_tx_b_z", + "uart_rx_b_z"; + function = "uart_b"; }; }; - tdmc_dout3_pins: tdmc_dout3 { + uart_b_z_cts_rts_pins: uart_b_z_cts_rts { mux { - groups = "tdmc_dout3"; - function = "tdmc"; + groups = "uart_cts_b_z", + "uart_rts_b_z"; + function = "uart_b"; + }; + }; + + uart_ao_b_z_pins: uart_ao_b_z { + mux { + groups = "uart_ao_tx_b_z", + "uart_ao_rx_b_z"; + function = "uart_ao_b_z"; + }; + }; + + uart_ao_b_z_cts_rts_pins: uart_ao_b_z_cts_rts { + mux { + groups = "uart_ao_cts_b_z", + "uart_ao_rts_b_z"; + function = "uart_ao_b_z"; }; }; }; }; - sram: sram@fffc0000 { - compatible = "amlogic,meson-axg-sram", "mmio-sram"; - reg = <0x0 0xfffc0000 0x0 0x20000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x0 0xfffc0000 0x20000>; + hiubus: bus@ff63c000 { + compatible = "simple-bus"; + reg = <0x0 0xff63c000 0x0 0x1c00>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0xff63c000 0x0 0x1c00>; - cpu_scp_lpri: scp-shmem@0 { - compatible = "amlogic,meson-axg-scp-shmem"; - reg = <0x13000 0x400>; + sysctrl: system-controller@0 { + compatible = "amlogic,meson-axg-hhi-sysctrl", + "simple-mfd", "syscon"; + reg = <0 0 0 0x400>; + + clkc: clock-controller { + compatible = "amlogic,axg-clkc"; + #clock-cells = <1>; + }; }; + }; - cpu_scp_hpri: scp-shmem@200 { - compatible = "amlogic,meson-axg-scp-shmem"; - reg = <0x13400 0x400>; + mailbox: mailbox@ff63dc00 { + compatible = "amlogic,meson-gx-mhu", "amlogic,meson-gxbb-mhu"; + reg = <0 0xff63dc00 0 0x400>; + interrupts = <GIC_SPI 208 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 209 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 210 IRQ_TYPE_EDGE_RISING>; + #mbox-cells = <1>; + }; + + audio: bus@ff642000 { + compatible = "simple-bus"; + reg = <0x0 0xff642000 0x0 0x2000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0xff642000 0x0 0x2000>; + + clkc_audio: clock-controller@0 { + compatible = "amlogic,axg-audio-clkc"; + reg = <0x0 0x0 0x0 0xb4>; + #clock-cells = <1>; + + clocks = <&clkc CLKID_AUDIO>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL3>, + <&clkc CLKID_HIFI_PLL>, + <&clkc CLKID_FCLK_DIV3>, + <&clkc CLKID_FCLK_DIV4>, + <&clkc CLKID_GP0_PLL>; + clock-names = "pclk", + "mst_in0", + "mst_in1", + "mst_in2", + "mst_in3", + "mst_in4", + "mst_in5", + "mst_in6", + "mst_in7"; + + resets = <&reset RESET_AUDIO>; + }; + + toddr_a: audio-controller@100 { + compatible = "amlogic,axg-toddr"; + reg = <0x0 0x100 0x0 0x1c>; + #sound-dai-cells = <0>; + sound-name-prefix = "TODDR_A"; + interrupts = <GIC_SPI 84 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_TODDR_A>; + resets = <&arb AXG_ARB_TODDR_A>; + status = "disabled"; + }; + + toddr_b: audio-controller@140 { + compatible = "amlogic,axg-toddr"; + reg = <0x0 0x140 0x0 0x1c>; + #sound-dai-cells = <0>; + sound-name-prefix = "TODDR_B"; + interrupts = <GIC_SPI 85 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_TODDR_B>; + resets = <&arb AXG_ARB_TODDR_B>; + status = "disabled"; + }; + + toddr_c: audio-controller@180 { + compatible = "amlogic,axg-toddr"; + reg = <0x0 0x180 0x0 0x1c>; + #sound-dai-cells = <0>; + sound-name-prefix = "TODDR_C"; + interrupts = <GIC_SPI 86 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_TODDR_C>; + resets = <&arb AXG_ARB_TODDR_C>; + status = "disabled"; + }; + + frddr_a: audio-controller@1c0 { + compatible = "amlogic,axg-frddr"; + reg = <0x0 0x1c0 0x0 0x1c>; + #sound-dai-cells = <0>; + sound-name-prefix = "FRDDR_A"; + interrupts = <GIC_SPI 88 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_FRDDR_A>; + resets = <&arb AXG_ARB_FRDDR_A>; + status = "disabled"; + }; + + frddr_b: audio-controller@200 { + compatible = "amlogic,axg-frddr"; + reg = <0x0 0x200 0x0 0x1c>; + #sound-dai-cells = <0>; + sound-name-prefix = "FRDDR_B"; + interrupts = <GIC_SPI 89 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_FRDDR_B>; + resets = <&arb AXG_ARB_FRDDR_B>; + status = "disabled"; + }; + + frddr_c: audio-controller@240 { + compatible = "amlogic,axg-frddr"; + reg = <0x0 0x240 0x0 0x1c>; + #sound-dai-cells = <0>; + sound-name-prefix = "FRDDR_C"; + interrupts = <GIC_SPI 90 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_FRDDR_C>; + resets = <&arb AXG_ARB_FRDDR_C>; + status = "disabled"; + }; + + arb: reset-controller@280 { + compatible = "amlogic,meson-axg-audio-arb"; + reg = <0x0 0x280 0x0 0x4>; + #reset-cells = <1>; + clocks = <&clkc_audio AUD_CLKID_DDR_ARB>; + }; + + tdmin_a: audio-controller@300 { + compatible = "amlogic,axg-tdmin"; + reg = <0x0 0x300 0x0 0x40>; + sound-name-prefix = "TDMIN_A"; + clocks = <&clkc_audio AUD_CLKID_TDMIN_A>, + <&clkc_audio AUD_CLKID_TDMIN_A_SCLK>, + <&clkc_audio AUD_CLKID_TDMIN_A_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>, + <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + tdmin_b: audio-controller@340 { + compatible = "amlogic,axg-tdmin"; + reg = <0x0 0x340 0x0 0x40>; + sound-name-prefix = "TDMIN_B"; + clocks = <&clkc_audio AUD_CLKID_TDMIN_B>, + <&clkc_audio AUD_CLKID_TDMIN_B_SCLK>, + <&clkc_audio AUD_CLKID_TDMIN_B_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>, + <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + tdmin_c: audio-controller@380 { + compatible = "amlogic,axg-tdmin"; + reg = <0x0 0x380 0x0 0x40>; + sound-name-prefix = "TDMIN_C"; + clocks = <&clkc_audio AUD_CLKID_TDMIN_C>, + <&clkc_audio AUD_CLKID_TDMIN_C_SCLK>, + <&clkc_audio AUD_CLKID_TDMIN_C_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>, + <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + tdmin_lb: audio-controller@3c0 { + compatible = "amlogic,axg-tdmin"; + reg = <0x0 0x3c0 0x0 0x40>; + sound-name-prefix = "TDMIN_LB"; + clocks = <&clkc_audio AUD_CLKID_TDMIN_LB>, + <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK>, + <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>, + <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + spdifout: audio-controller@480 { + compatible = "amlogic,axg-spdifout"; + reg = <0x0 0x480 0x0 0x50>; + #sound-dai-cells = <0>; + sound-name-prefix = "SPDIFOUT"; + clocks = <&clkc_audio AUD_CLKID_SPDIFOUT>, + <&clkc_audio AUD_CLKID_SPDIFOUT_CLK>; + clock-names = "pclk", "mclk"; + status = "disabled"; + }; + + tdmout_a: audio-controller@500 { + compatible = "amlogic,axg-tdmout"; + reg = <0x0 0x500 0x0 0x40>; + sound-name-prefix = "TDMOUT_A"; + clocks = <&clkc_audio AUD_CLKID_TDMOUT_A>, + <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + tdmout_b: audio-controller@540 { + compatible = "amlogic,axg-tdmout"; + reg = <0x0 0x540 0x0 0x40>; + sound-name-prefix = "TDMOUT_B"; + clocks = <&clkc_audio AUD_CLKID_TDMOUT_B>, + <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + tdmout_c: audio-controller@580 { + compatible = "amlogic,axg-tdmout"; + reg = <0x0 0x580 0x0 0x40>; + sound-name-prefix = "TDMOUT_C"; + clocks = <&clkc_audio AUD_CLKID_TDMOUT_C>, + <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; }; }; @@ -1329,7 +1209,7 @@ ranges = <0x0 0x0 0x0 0xff800000 0x0 0x100000>; sysctrl_AO: sys-ctrl@0 { - compatible = "amlogic,meson-axg-ao-sysctrl", "syscon", "simple-mfd"; + compatible = "amlogic,meson-axg-ao-sysctrl", "simple-mfd", "syscon"; reg = <0x0 0x0 0x0 0x100>; clkc_AO: clock-controller { @@ -1347,8 +1227,8 @@ gpio_ao: bank@14 { reg = <0x0 0x00014 0x0 0x8>, - <0x0 0x0002c 0x0 0x4>, - <0x0 0x00024 0x0 0x8>; + <0x0 0x0002c 0x0 0x4>, + <0x0 0x00024 0x0 0x8>; reg-names = "mux", "pull", "gpio"; gpio-controller; #gpio-cells = <2>; @@ -1407,7 +1287,7 @@ uart_ao_a_pins: uart_ao_a { mux { groups = "uart_ao_tx_a", - "uart_ao_rx_a"; + "uart_ao_rx_a"; function = "uart_ao_a"; }; }; @@ -1415,7 +1295,7 @@ uart_ao_a_cts_rts_pins: uart_ao_a_cts_rts { mux { groups = "uart_ao_cts_a", - "uart_ao_rts_a"; + "uart_ao_rts_a"; function = "uart_ao_a"; }; }; @@ -1423,7 +1303,7 @@ uart_ao_b_pins: uart_ao_b { mux { groups = "uart_ao_tx_b", - "uart_ao_rx_b"; + "uart_ao_rx_b"; function = "uart_ao_b"; }; }; @@ -1431,7 +1311,7 @@ uart_ao_b_cts_rts_pins: uart_ao_b_cts_rts { mux { groups = "uart_ao_cts_b", - "uart_ao_rts_b"; + "uart_ao_rts_b"; function = "uart_ao_b"; }; }; @@ -1443,13 +1323,6 @@ amlogic,has-chip-id; }; - pwm_AO_ab: pwm@7000 { - compatible = "amlogic,meson-axg-ao-pwm"; - reg = <0x0 0x07000 0x0 0x20>; - #pwm-cells = <3>; - status = "disabled"; - }; - pwm_AO_cd: pwm@2000 { compatible = "amlogic,meson-axg-ao-pwm"; reg = <0x0 0x02000 0x0 0x20>; @@ -1457,16 +1330,6 @@ status = "disabled"; }; - i2c_AO: i2c@5000 { - compatible = "amlogic,meson-axg-i2c"; - reg = <0x0 0x05000 0x0 0x20>; - interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>; - clocks = <&clkc CLKID_AO_I2C>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - uart_AO: serial@3000 { compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart"; reg = <0x0 0x3000 0x0 0x18>; @@ -1485,6 +1348,23 @@ status = "disabled"; }; + i2c_AO: i2c@5000 { + compatible = "amlogic,meson-axg-i2c"; + reg = <0x0 0x05000 0x0 0x20>; + interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc CLKID_AO_I2C>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + pwm_AO_ab: pwm@7000 { + compatible = "amlogic,meson-axg-ao-pwm"; + reg = <0x0 0x07000 0x0 0x20>; + #pwm-cells = <3>; + status = "disabled"; + }; + ir: ir@8000 { compatible = "amlogic,meson-gxbb-ir"; reg = <0x0 0x8000 0x0 0x20>; @@ -1499,12 +1379,211 @@ #io-channel-cells = <1>; interrupts = <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>; clocks = <&xtal>, - <&clkc_AO CLKID_AO_SAR_ADC>, - <&clkc_AO CLKID_AO_SAR_ADC_CLK>, - <&clkc_AO CLKID_AO_SAR_ADC_SEL>; + <&clkc_AO CLKID_AO_SAR_ADC>, + <&clkc_AO CLKID_AO_SAR_ADC_CLK>, + <&clkc_AO CLKID_AO_SAR_ADC_SEL>; clock-names = "clkin", "core", "adc_clk", "adc_sel"; status = "disabled"; }; }; + + gic: interrupt-controller@ffc01000 { + compatible = "arm,gic-400"; + reg = <0x0 0xffc01000 0 0x1000>, + <0x0 0xffc02000 0 0x2000>, + <0x0 0xffc04000 0 0x2000>, + <0x0 0xffc06000 0 0x2000>; + interrupt-controller; + interrupts = <GIC_PPI 9 + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>; + #interrupt-cells = <3>; + #address-cells = <0>; + }; + + cbus: bus@ffd00000 { + compatible = "simple-bus"; + reg = <0x0 0xffd00000 0x0 0x25000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0xffd00000 0x0 0x25000>; + + reset: reset-controller@1004 { + compatible = "amlogic,meson-axg-reset"; + reg = <0x0 0x01004 0x0 0x9c>; + #reset-cells = <1>; + }; + + gpio_intc: interrupt-controller@f080 { + compatible = "amlogic,meson-gpio-intc"; + reg = <0x0 0xf080 0x0 0x10>; + interrupt-controller; + #interrupt-cells = <2>; + amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>; + status = "disabled"; + }; + + pwm_ab: pwm@1b000 { + compatible = "amlogic,meson-axg-ee-pwm"; + reg = <0x0 0x1b000 0x0 0x20>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm_cd: pwm@1a000 { + compatible = "amlogic,meson-axg-ee-pwm"; + reg = <0x0 0x1a000 0x0 0x20>; + #pwm-cells = <3>; + status = "disabled"; + }; + + spicc0: spi@13000 { + compatible = "amlogic,meson-axg-spicc"; + reg = <0x0 0x13000 0x0 0x3c>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clkc CLKID_SPICC0>; + clock-names = "core"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spicc1: spi@15000 { + compatible = "amlogic,meson-axg-spicc"; + reg = <0x0 0x15000 0x0 0x3c>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clkc CLKID_SPICC1>; + clock-names = "core"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@1c000 { + compatible = "amlogic,meson-axg-i2c"; + reg = <0x0 0x1c000 0x0 0x20>; + interrupts = <GIC_SPI 39 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc CLKID_I2C>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@1d000 { + compatible = "amlogic,meson-axg-i2c"; + reg = <0x0 0x1d000 0x0 0x20>; + interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc CLKID_I2C>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@1e000 { + compatible = "amlogic,meson-axg-i2c"; + reg = <0x0 0x1e000 0x0 0x20>; + interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc CLKID_I2C>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c0: i2c@1f000 { + compatible = "amlogic,meson-axg-i2c"; + reg = <0x0 0x1f000 0x0 0x20>; + interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc CLKID_I2C>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart_B: serial@23000 { + compatible = "amlogic,meson-gx-uart"; + reg = <0x0 0x23000 0x0 0x18>; + interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + clocks = <&xtal>, <&clkc CLKID_UART1>, <&xtal>; + clock-names = "xtal", "pclk", "baud"; + }; + + uart_A: serial@24000 { + compatible = "amlogic,meson-gx-uart"; + reg = <0x0 0x24000 0x0 0x18>; + interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + clocks = <&xtal>, <&clkc CLKID_UART0>, <&xtal>; + clock-names = "xtal", "pclk", "baud"; + }; + }; + + apb: bus@ffe00000 { + compatible = "simple-bus"; + reg = <0x0 0xffe00000 0x0 0x200000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0xffe00000 0x0 0x200000>; + + sd_emmc_b: sd@5000 { + compatible = "amlogic,meson-axg-mmc"; + reg = <0x0 0x5000 0x0 0x800>; + interrupts = <GIC_SPI 217 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + clocks = <&clkc CLKID_SD_EMMC_B>, + <&clkc CLKID_SD_EMMC_B_CLK0>, + <&clkc CLKID_FCLK_DIV2>; + clock-names = "core", "clkin0", "clkin1"; + resets = <&reset RESET_SD_EMMC_B>; + }; + + sd_emmc_c: mmc@7000 { + compatible = "amlogic,meson-axg-mmc"; + reg = <0x0 0x7000 0x0 0x800>; + interrupts = <GIC_SPI 218 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + clocks = <&clkc CLKID_SD_EMMC_C>, + <&clkc CLKID_SD_EMMC_C_CLK0>, + <&clkc CLKID_FCLK_DIV2>; + clock-names = "core", "clkin0", "clkin1"; + resets = <&reset RESET_SD_EMMC_C>; + }; + }; + + sram: sram@fffc0000 { + compatible = "amlogic,meson-axg-sram", "mmio-sram"; + reg = <0x0 0xfffc0000 0x0 0x20000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x0 0xfffc0000 0x20000>; + + cpu_scp_lpri: scp-shmem@0 { + compatible = "amlogic,meson-axg-scp-shmem"; + reg = <0x13000 0x400>; + }; + + cpu_scp_hpri: scp-shmem@200 { + compatible = "amlogic,meson-axg-scp-shmem"; + reg = <0x13400 0x400>; + }; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 + (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 + (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 + (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 + (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>; + }; + + xtal: xtal-clk { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "xtal"; + #clock-cells = <0>; }; }; diff --git a/dts/src/arm64/amlogic/meson-g12a-u200.dts b/dts/src/arm64/amlogic/meson-g12a-u200.dts new file mode 100644 index 0000000000..c44dbdddf2 --- /dev/null +++ b/dts/src/arm64/amlogic/meson-g12a-u200.dts @@ -0,0 +1,29 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2018 Amlogic, Inc. All rights reserved. + */ + +/dts-v1/; + +#include "meson-g12a.dtsi" + +/ { + compatible = "amlogic,u200", "amlogic,g12a"; + model = "Amlogic Meson G12A U200 Development Board"; + + aliases { + serial0 = &uart_AO; + }; + chosen { + stdout-path = "serial0:115200n8"; + }; + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x40000000>; + }; +}; + +&uart_AO { + status = "okay"; +}; + diff --git a/dts/src/arm64/amlogic/meson-g12a.dtsi b/dts/src/arm64/amlogic/meson-g12a.dtsi new file mode 100644 index 0000000000..3b82a975c6 --- /dev/null +++ b/dts/src/arm64/amlogic/meson-g12a.dtsi @@ -0,0 +1,172 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2018 Amlogic, Inc. All rights reserved. + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + compatible = "amlogic,g12a"; + + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <0x2>; + #size-cells = <0x0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x0>; + enable-method = "psci"; + next-level-cache = <&l2>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x1>; + enable-method = "psci"; + next-level-cache = <&l2>; + }; + + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x2>; + enable-method = "psci"; + next-level-cache = <&l2>; + }; + + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x3>; + enable-method = "psci"; + next-level-cache = <&l2>; + }; + + l2: l2-cache0 { + compatible = "cache"; + }; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* 3 MiB reserved for ARM Trusted Firmware (BL31) */ + secmon_reserved: secmon@5000000 { + reg = <0x0 0x05000000 0x0 0x300000>; + no-map; + }; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + periphs: periphs@ff634000 { + compatible = "simple-bus"; + reg = <0x0 0xff634000 0x0 0x2000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0xff634000 0x0 0x2000>; + }; + + hiubus: bus@ff63c000 { + compatible = "simple-bus"; + reg = <0x0 0xff63c000 0x0 0x1c00>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0xff63c000 0x0 0x1c00>; + }; + + aobus: bus@ff800000 { + compatible = "simple-bus"; + reg = <0x0 0xff800000 0x0 0x100000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0xff800000 0x0 0x100000>; + + uart_AO: serial@3000 { + compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart"; + reg = <0x0 0x3000 0x0 0x18>; + interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>; + clocks = <&xtal>, <&xtal>, <&xtal>; + clock-names = "xtal", "pclk", "baud"; + status = "disabled"; + }; + + uart_AO_B: serial@4000 { + compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart"; + reg = <0x0 0x4000 0x0 0x18>; + interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>; + clocks = <&xtal>, <&xtal>, <&xtal>; + clock-names = "xtal", "pclk", "baud"; + status = "disabled"; + }; + }; + + gic: interrupt-controller@ffc01000 { + compatible = "arm,gic-400"; + reg = <0x0 0xffc01000 0 0x1000>, + <0x0 0xffc02000 0 0x2000>, + <0x0 0xffc04000 0 0x2000>, + <0x0 0xffc06000 0 0x2000>; + interrupt-controller; + interrupts = <GIC_PPI 9 + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>; + #interrupt-cells = <3>; + #address-cells = <0>; + }; + + cbus: bus@ffd00000 { + compatible = "simple-bus"; + reg = <0x0 0xffd00000 0x0 0x25000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0xffd00000 0x0 0x25000>; + }; + + apb: apb@ffe00000 { + compatible = "simple-bus"; + reg = <0x0 0xffe00000 0x0 0x200000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0xffe00000 0x0 0x200000>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 + (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 + (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 + (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 + (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>; + }; + + xtal: xtal-clk { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "xtal"; + #clock-cells = <0>; + }; + +}; diff --git a/dts/src/arm64/amlogic/meson-gx.dtsi b/dts/src/arm64/amlogic/meson-gx.dtsi index b8dc4dbb39..f1e5cdbade 100644 --- a/dts/src/arm64/amlogic/meson-gx.dtsi +++ b/dts/src/arm64/amlogic/meson-gx.dtsi @@ -44,7 +44,7 @@ linux,cma { compatible = "shared-dma-pool"; reusable; - size = <0x0 0xbc00000>; + size = <0x0 0x10000000>; alignment = <0x0 0x400000>; linux,cma-default; }; @@ -344,7 +344,7 @@ ranges = <0x0 0x0 0x0 0xc8100000 0x0 0x100000>; sysctrl_AO: sys-ctrl@0 { - compatible = "amlogic,meson-gx-ao-sysctrl", "syscon", "simple-mfd"; + compatible = "amlogic,meson-gx-ao-sysctrl", "simple-mfd", "syscon"; reg = <0x0 0x0 0x0 0x100>; pwrc_vpu: power-controller-vpu { @@ -423,6 +423,19 @@ }; }; + dmcbus: bus@c8838000 { + compatible = "simple-bus"; + reg = <0x0 0xc8838000 0x0 0x400>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0xc8838000 0x0 0x400>; + + canvas: video-lut@48 { + compatible = "amlogic,canvas"; + reg = <0x0 0x48 0x0 0x14>; + }; + }; + hiubus: bus@c883c000 { compatible = "simple-bus"; reg = <0x0 0xc883c000 0x0 0x2000>; @@ -431,7 +444,7 @@ ranges = <0x0 0x0 0x0 0xc883c000 0x0 0x2000>; sysctrl: system-controller@0 { - compatible = "amlogic,meson-gx-hhi-sysctrl", "syscon", "simple-mfd"; + compatible = "amlogic,meson-gx-hhi-sysctrl", "simple-mfd", "syscon"; reg = <0 0 0 0x400>; }; diff --git a/dts/src/arm64/amlogic/meson-gxbb.dtsi b/dts/src/arm64/amlogic/meson-gxbb.dtsi index 98cbba6809..1ade7e4868 100644 --- a/dts/src/arm64/amlogic/meson-gxbb.dtsi +++ b/dts/src/arm64/amlogic/meson-gxbb.dtsi @@ -390,7 +390,7 @@ }; }; - spi_pins: spi { + spi_pins: spi-pins { mux { groups = "spi_miso", "spi_mosi", diff --git a/dts/src/arm64/amlogic/meson-gxl-s905x-libretech-cc.dts b/dts/src/arm64/amlogic/meson-gxl-s905x-libretech-cc.dts index f63bceb88c..90a56af967 100644 --- a/dts/src/arm64/amlogic/meson-gxl-s905x-libretech-cc.dts +++ b/dts/src/arm64/amlogic/meson-gxl-s905x-libretech-cc.dts @@ -13,7 +13,7 @@ / { compatible = "libretech,cc", "amlogic,s905x", "amlogic,meson-gxl"; - model = "Libre Technology CC"; + model = "Libre Computer Board AML-S905X-CC"; aliases { serial0 = &uart_AO; diff --git a/dts/src/arm64/amlogic/meson-gxl.dtsi b/dts/src/arm64/amlogic/meson-gxl.dtsi index c87a80e9bc..8f0bb3c44b 100644 --- a/dts/src/arm64/amlogic/meson-gxl.dtsi +++ b/dts/src/arm64/amlogic/meson-gxl.dtsi @@ -337,7 +337,7 @@ }; }; - spi_pins: spi { + spi_pins: spi-pins { mux { groups = "spi_miso", "spi_mosi", diff --git a/dts/src/arm64/arm/juno-base.dtsi b/dts/src/arm64/arm/juno-base.dtsi index ce56a4acda..ed774ee8f6 100644 --- a/dts/src/arm64/arm/juno-base.dtsi +++ b/dts/src/arm64/arm/juno-base.dtsi @@ -115,22 +115,17 @@ clocks = <&soc_smc50mhz>; clock-names = "apb_pclk"; power-domains = <&scpi_devpd 0>; - ports { - #address-cells = <1>; - #size-cells = <0>; - /* input port */ - port@0 { - reg = <0>; + in-ports { + port { etf0_in_port: endpoint { - slave-mode; remote-endpoint = <&main_funnel_out_port>; }; }; + }; - /* output port */ - port@1 { - reg = <0>; + out-ports { + port { etf0_out_port: endpoint { }; }; @@ -144,10 +139,11 @@ clocks = <&soc_smc50mhz>; clock-names = "apb_pclk"; power-domains = <&scpi_devpd 0>; - port { - tpiu_in_port: endpoint { - slave-mode; - remote-endpoint = <&replicator_out_port0>; + in-ports { + port { + tpiu_in_port: endpoint { + remote-endpoint = <&replicator_out_port0>; + }; }; }; }; @@ -160,31 +156,29 @@ clocks = <&soc_smc50mhz>; clock-names = "apb_pclk"; power-domains = <&scpi_devpd 0>; - ports { - #address-cells = <1>; - #size-cells = <0>; - /* output port */ - port@0 { - reg = <0>; + out-ports { + port { main_funnel_out_port: endpoint { remote-endpoint = <&etf0_in_port>; }; }; + }; - /* input ports */ - port@1 { + main_funnel_in_ports: in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { reg = <0>; main_funnel_in_port0: endpoint { - slave-mode; remote-endpoint = <&cluster0_funnel_out_port>; }; }; - port@2 { + port@1 { reg = <1>; main_funnel_in_port1: endpoint { - slave-mode; remote-endpoint = <&cluster1_funnel_out_port>; }; }; @@ -199,10 +193,12 @@ clocks = <&soc_smc50mhz>; clock-names = "apb_pclk"; power-domains = <&scpi_devpd 0>; - port { - etr_in_port: endpoint { - slave-mode; - remote-endpoint = <&replicator_out_port1>; + arm,scatter-gather; + in-ports { + port { + etr_in_port: endpoint { + remote-endpoint = <&replicator_out_port1>; + }; }; }; }; @@ -216,8 +212,10 @@ clocks = <&soc_smc50mhz>; clock-names = "apb_pclk"; power-domains = <&scpi_devpd 0>; - port { - stm_out_port: endpoint { + out-ports { + port { + stm_out_port: endpoint { + }; }; }; }; @@ -238,9 +236,11 @@ clocks = <&soc_smc50mhz>; clock-names = "apb_pclk"; power-domains = <&scpi_devpd 0>; - port { - cluster0_etm0_out_port: endpoint { - remote-endpoint = <&cluster0_funnel_in_port0>; + out-ports { + port { + cluster0_etm0_out_port: endpoint { + remote-endpoint = <&cluster0_funnel_in_port0>; + }; }; }; }; @@ -252,29 +252,28 @@ clocks = <&soc_smc50mhz>; clock-names = "apb_pclk"; power-domains = <&scpi_devpd 0>; - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; + out-ports { + port { cluster0_funnel_out_port: endpoint { remote-endpoint = <&main_funnel_in_port0>; }; }; + }; - port@1 { + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { reg = <0>; cluster0_funnel_in_port0: endpoint { - slave-mode; remote-endpoint = <&cluster0_etm0_out_port>; }; }; - port@2 { + port@1 { reg = <1>; cluster0_funnel_in_port1: endpoint { - slave-mode; remote-endpoint = <&cluster0_etm1_out_port>; }; }; @@ -297,9 +296,11 @@ clocks = <&soc_smc50mhz>; clock-names = "apb_pclk"; power-domains = <&scpi_devpd 0>; - port { - cluster0_etm1_out_port: endpoint { - remote-endpoint = <&cluster0_funnel_in_port1>; + out-ports { + port { + cluster0_etm1_out_port: endpoint { + remote-endpoint = <&cluster0_funnel_in_port1>; + }; }; }; }; @@ -320,9 +321,11 @@ clocks = <&soc_smc50mhz>; clock-names = "apb_pclk"; power-domains = <&scpi_devpd 0>; - port { - cluster1_etm0_out_port: endpoint { - remote-endpoint = <&cluster1_funnel_in_port0>; + out-ports { + port { + cluster1_etm0_out_port: endpoint { + remote-endpoint = <&cluster1_funnel_in_port0>; + }; }; }; }; @@ -334,43 +337,40 @@ clocks = <&soc_smc50mhz>; clock-names = "apb_pclk"; power-domains = <&scpi_devpd 0>; - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; + out-ports { + port { cluster1_funnel_out_port: endpoint { remote-endpoint = <&main_funnel_in_port1>; }; }; + }; - port@1 { + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { reg = <0>; cluster1_funnel_in_port0: endpoint { - slave-mode; remote-endpoint = <&cluster1_etm0_out_port>; }; }; - port@2 { + port@1 { reg = <1>; cluster1_funnel_in_port1: endpoint { - slave-mode; remote-endpoint = <&cluster1_etm1_out_port>; }; }; - port@3 { + port@2 { reg = <2>; cluster1_funnel_in_port2: endpoint { - slave-mode; remote-endpoint = <&cluster1_etm2_out_port>; }; }; - port@4 { + port@3 { reg = <3>; cluster1_funnel_in_port3: endpoint { - slave-mode; remote-endpoint = <&cluster1_etm3_out_port>; }; }; @@ -393,9 +393,11 @@ clocks = <&soc_smc50mhz>; clock-names = "apb_pclk"; power-domains = <&scpi_devpd 0>; - port { - cluster1_etm1_out_port: endpoint { - remote-endpoint = <&cluster1_funnel_in_port1>; + out-ports { + port { + cluster1_etm1_out_port: endpoint { + remote-endpoint = <&cluster1_funnel_in_port1>; + }; }; }; }; @@ -416,9 +418,11 @@ clocks = <&soc_smc50mhz>; clock-names = "apb_pclk"; power-domains = <&scpi_devpd 0>; - port { - cluster1_etm2_out_port: endpoint { - remote-endpoint = <&cluster1_funnel_in_port2>; + out-ports { + port { + cluster1_etm2_out_port: endpoint { + remote-endpoint = <&cluster1_funnel_in_port2>; + }; }; }; }; @@ -439,9 +443,11 @@ clocks = <&soc_smc50mhz>; clock-names = "apb_pclk"; power-domains = <&scpi_devpd 0>; - port { - cluster1_etm3_out_port: endpoint { - remote-endpoint = <&cluster1_funnel_in_port3>; + out-ports { + port { + cluster1_etm3_out_port: endpoint { + remote-endpoint = <&cluster1_funnel_in_port3>; + }; }; }; }; @@ -454,7 +460,7 @@ clock-names = "apb_pclk"; power-domains = <&scpi_devpd 0>; - ports { + out-ports { #address-cells = <1>; #size-cells = <0>; @@ -472,12 +478,10 @@ remote-endpoint = <&etr_in_port>; }; }; - - /* replicator input port */ - port@2 { - reg = <0>; + }; + in-ports { + port { replicator_in_port0: endpoint { - slave-mode; }; }; }; diff --git a/dts/src/arm64/arm/juno-cs-r1r2.dtsi b/dts/src/arm64/arm/juno-cs-r1r2.dtsi index 0c43fb3525..cf285152de 100644 --- a/dts/src/arm64/arm/juno-cs-r1r2.dtsi +++ b/dts/src/arm64/arm/juno-cs-r1r2.dtsi @@ -7,23 +7,16 @@ clocks = <&soc_smc50mhz>; clock-names = "apb_pclk"; power-domains = <&scpi_devpd 0>; - ports { - #address-cells = <1>; - #size-cells = <0>; - - /* output port */ - port@0 { - reg = <0>; + out-ports { + port { csys1_funnel_out_port: endpoint { remote-endpoint = <&etf1_in_port>; }; }; - - /* input port */ - port@1 { - reg = <0>; + }; + in-ports { + port { csys1_funnel_in_port0: endpoint { - slave-mode; }; }; @@ -37,22 +30,15 @@ clocks = <&soc_smc50mhz>; clock-names = "apb_pclk"; power-domains = <&scpi_devpd 0>; - ports { - #address-cells = <1>; - #size-cells = <0>; - - /* input port */ - port@0 { - reg = <0>; + in-ports { + port { etf1_in_port: endpoint { - slave-mode; remote-endpoint = <&csys1_funnel_out_port>; }; }; - - /* output port */ - port@1 { - reg = <0>; + }; + out-ports { + port { etf1_out_port: endpoint { remote-endpoint = <&csys2_funnel_in_port1>; }; @@ -67,20 +53,18 @@ clocks = <&soc_smc50mhz>; clock-names = "apb_pclk"; power-domains = <&scpi_devpd 0>; - ports { - #address-cells = <1>; - #size-cells = <0>; - - /* output port */ - port@0 { - reg = <0>; + out-ports { + port { csys2_funnel_out_port: endpoint { remote-endpoint = <&replicator_in_port0>; }; }; + }; - /* input ports */ - port@1 { + in-ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { reg = <0>; csys2_funnel_in_port0: endpoint { slave-mode; @@ -88,7 +72,7 @@ }; }; - port@2 { + port@1 { reg = <1>; csys2_funnel_in_port1: endpoint { slave-mode; diff --git a/dts/src/arm64/arm/juno.dts b/dts/src/arm64/arm/juno.dts index 1fb5c5a0f3..08d4ba1716 100644 --- a/dts/src/arm64/arm/juno.dts +++ b/dts/src/arm64/arm/juno.dts @@ -257,14 +257,11 @@ remote-endpoint = <&main_funnel_in_port2>; }; -&main_funnel { - ports { - port@3 { - reg = <2>; - main_funnel_in_port2: endpoint { - slave-mode; - remote-endpoint = <&stm_out_port>; - }; +&main_funnel_in_ports { + port@2 { + reg = <2>; + main_funnel_in_port2: endpoint { + remote-endpoint = <&stm_out_port>; }; }; }; diff --git a/dts/src/arm64/broadcom/bcm2837-rpi-cm3-io3.dts b/dts/src/arm64/broadcom/bcm2837-rpi-cm3-io3.dts new file mode 100644 index 0000000000..b1c4ab212c --- /dev/null +++ b/dts/src/arm64/broadcom/bcm2837-rpi-cm3-io3.dts @@ -0,0 +1,2 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "arm/bcm2837-rpi-cm3-io3.dts" diff --git a/dts/src/arm64/broadcom/northstar2/ns2.dtsi b/dts/src/arm64/broadcom/northstar2/ns2.dtsi index 1a406a76c8..ea854f689f 100644 --- a/dts/src/arm64/broadcom/northstar2/ns2.dtsi +++ b/dts/src/arm64/broadcom/northstar2/ns2.dtsi @@ -639,7 +639,7 @@ status = "disabled"; }; - ssp0: ssp@66180000 { + ssp0: spi@66180000 { compatible = "arm,pl022", "arm,primecell"; reg = <0x66180000 0x1000>; interrupts = <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>; @@ -650,7 +650,7 @@ status = "disabled"; }; - ssp1: ssp@66190000 { + ssp1: spi@66190000 { compatible = "arm,pl022", "arm,primecell"; reg = <0x66190000 0x1000>; interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>; diff --git a/dts/src/arm64/broadcom/stingray/bcm958742-base.dtsi b/dts/src/arm64/broadcom/stingray/bcm958742-base.dtsi index bc299c3d90..a9b92e52d5 100644 --- a/dts/src/arm64/broadcom/stingray/bcm958742-base.dtsi +++ b/dts/src/arm64/broadcom/stingray/bcm958742-base.dtsi @@ -138,7 +138,7 @@ &i2c1 { status = "okay"; - pcf8574: pcf8574@20 { + pcf8574: pcf8574@27 { compatible = "nxp,pcf8574a"; gpio-controller; #gpio-cells = <2>; diff --git a/dts/src/arm64/broadcom/stingray/stingray.dtsi b/dts/src/arm64/broadcom/stingray/stingray.dtsi index e283480bfc..cfeaa855bd 100644 --- a/dts/src/arm64/broadcom/stingray/stingray.dtsi +++ b/dts/src/arm64/broadcom/stingray/stingray.dtsi @@ -521,7 +521,7 @@ status = "disabled"; }; - ssp0: ssp@180000 { + ssp0: spi@180000 { compatible = "arm,pl022", "arm,primecell"; reg = <0x00180000 0x1000>; interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>; @@ -533,7 +533,7 @@ status = "disabled"; }; - ssp1: ssp@190000 { + ssp1: spi@190000 { compatible = "arm,pl022", "arm,primecell"; reg = <0x00190000 0x1000>; interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; diff --git a/dts/src/arm64/exynos/exynos5433-tm2-common.dtsi b/dts/src/arm64/exynos/exynos5433-tm2-common.dtsi index a1e3194b74..f3ed4c078b 100644 --- a/dts/src/arm64/exynos/exynos5433-tm2-common.dtsi +++ b/dts/src/arm64/exynos/exynos5433-tm2-common.dtsi @@ -868,6 +868,14 @@ }; }; }; + + ports { + port { + muic_to_usb: endpoint { + remote-endpoint = <&usb_to_muic>; + }; + }; + }; }; regulators { @@ -939,8 +947,7 @@ status = "okay"; cap-sd-highspeed; disable-wp; - cd-gpios = <&gpa2 4 GPIO_ACTIVE_HIGH>; - cd-inverted; + cd-gpios = <&gpa2 4 GPIO_ACTIVE_LOW>; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <0 4>; @@ -1283,12 +1290,17 @@ &usbdrd_dwc3 { dr_mode = "otg"; - extcon = <&muic>; }; &usbdrd30_phy { vbus-supply = <&safeout1_reg>; status = "okay"; + + port { + usb_to_muic: endpoint { + remote-endpoint = <&muic_to_usb>; + }; + }; }; &xxti { diff --git a/dts/src/arm64/freescale/fsl-ls1012a.dtsi b/dts/src/arm64/freescale/fsl-ls1012a.dtsi index 68ac78c456..5da732f82f 100644 --- a/dts/src/arm64/freescale/fsl-ls1012a.dtsi +++ b/dts/src/arm64/freescale/fsl-ls1012a.dtsi @@ -337,7 +337,7 @@ status = "disabled"; }; - dspi: dspi@2100000 { + dspi: spi@2100000 { compatible = "fsl,ls1012a-dspi", "fsl,ls1021a-v1.0-dspi"; #address-cells = <1>; #size-cells = <0>; diff --git a/dts/src/arm64/freescale/fsl-ls1043a-qds.dts b/dts/src/arm64/freescale/fsl-ls1043a-qds.dts index c7b8d2c009..dff3d64817 100644 --- a/dts/src/arm64/freescale/fsl-ls1043a-qds.dts +++ b/dts/src/arm64/freescale/fsl-ls1043a-qds.dts @@ -3,6 +3,7 @@ * Device Tree Include file for Freescale Layerscape-1043A family SoC. * * Copyright 2014-2015 Freescale Semiconductor, Inc. + * Copyright 2018 NXP * * Mingkai Hu <Mingkai.hu@freescale.com> */ @@ -50,6 +51,7 @@ nor@0,0 { compatible = "cfi-flash"; reg = <0x0 0x0 0x8000000>; + big-endian; bank-width = <2>; device-width = <1>; }; diff --git a/dts/src/arm64/freescale/fsl-ls1043a-rdb.dts b/dts/src/arm64/freescale/fsl-ls1043a-rdb.dts index 7b01ba8d3b..17ca357e85 100644 --- a/dts/src/arm64/freescale/fsl-ls1043a-rdb.dts +++ b/dts/src/arm64/freescale/fsl-ls1043a-rdb.dts @@ -3,6 +3,7 @@ * Device Tree Include file for Freescale Layerscape-1043A family SoC. * * Copyright 2014-2015 Freescale Semiconductor, Inc. + * Copyright 2018 NXP * * Mingkai Hu <Mingkai.hu@freescale.com> */ @@ -65,6 +66,7 @@ #address-cells = <1>; #size-cells = <1>; reg = <0x0 0x0 0x8000000>; + big-endian; bank-width = <2>; device-width = <1>; }; diff --git a/dts/src/arm64/freescale/fsl-ls1043a.dtsi b/dts/src/arm64/freescale/fsl-ls1043a.dtsi index 7881e3d81a..3fed504b53 100644 --- a/dts/src/arm64/freescale/fsl-ls1043a.dtsi +++ b/dts/src/arm64/freescale/fsl-ls1043a.dtsi @@ -3,6 +3,7 @@ * Device Tree Include file for Freescale Layerscape-1043A family SoC. * * Copyright 2014-2015 Freescale Semiconductor, Inc. + * Copyright 2018 NXP * * Mingkai Hu <Mingkai.hu@freescale.com> */ @@ -280,11 +281,10 @@ ifc: ifc@1530000 { compatible = "fsl,ifc", "simple-bus"; reg = <0x0 0x1530000 0x0 0x10000>; - big-endian; interrupts = <0 43 0x4>; }; - qspi: quadspi@1550000 { + qspi: spi@1550000 { compatible = "fsl,ls1043a-qspi", "fsl,ls1021a-qspi"; #address-cells = <1>; #size-cells = <0>; @@ -382,7 +382,7 @@ ranges = <0x0 0x5 0x00000000 0x8000000>; }; - dspi0: dspi@2100000 { + dspi0: spi@2100000 { compatible = "fsl,ls1043a-dspi", "fsl,ls1021a-v1.0-dspi"; #address-cells = <1>; #size-cells = <0>; @@ -395,7 +395,7 @@ status = "disabled"; }; - dspi1: dspi@2110000 { + dspi1: spi@2110000 { compatible = "fsl,ls1043a-dspi", "fsl,ls1021a-v1.0-dspi"; #address-cells = <1>; #size-cells = <0>; diff --git a/dts/src/arm64/freescale/fsl-ls1046a-qds.dts b/dts/src/arm64/freescale/fsl-ls1046a-qds.dts index e69306e6b0..e58a8ca138 100644 --- a/dts/src/arm64/freescale/fsl-ls1046a-qds.dts +++ b/dts/src/arm64/freescale/fsl-ls1046a-qds.dts @@ -3,6 +3,7 @@ * Device Tree Include file for Freescale Layerscape-1046A family SoC. * * Copyright 2016 Freescale Semiconductor, Inc. + * Copyright 2018 NXP * * Shaohui Xie <Shaohui.Xie@nxp.com> */ @@ -141,6 +142,7 @@ nor@0,0 { compatible = "cfi-flash"; reg = <0x0 0x0 0x8000000>; + big-endian; bank-width = <2>; device-width = <1>; }; diff --git a/dts/src/arm64/freescale/fsl-ls1046a-rdb.dts b/dts/src/arm64/freescale/fsl-ls1046a-rdb.dts index 440e111651..a59b482036 100644 --- a/dts/src/arm64/freescale/fsl-ls1046a-rdb.dts +++ b/dts/src/arm64/freescale/fsl-ls1046a-rdb.dts @@ -57,12 +57,12 @@ reg = <0x4c>; }; - eeprom@56 { + eeprom@52 { compatible = "atmel,24c512"; reg = <0x52>; }; - eeprom@57 { + eeprom@53 { compatible = "atmel,24c512"; reg = <0x53>; }; diff --git a/dts/src/arm64/freescale/fsl-ls1046a.dtsi b/dts/src/arm64/freescale/fsl-ls1046a.dtsi index ef83786b8b..51cbd50012 100644 --- a/dts/src/arm64/freescale/fsl-ls1046a.dtsi +++ b/dts/src/arm64/freescale/fsl-ls1046a.dtsi @@ -3,6 +3,7 @@ * Device Tree Include file for Freescale Layerscape-1046A family SoC. * * Copyright 2016 Freescale Semiconductor, Inc. + * Copyright 2018 NXP * * Mingkai Hu <mingkai.hu@nxp.com> */ @@ -198,11 +199,10 @@ ifc: ifc@1530000 { compatible = "fsl,ifc", "simple-bus"; reg = <0x0 0x1530000 0x0 0x10000>; - big-endian; interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; }; - qspi: quadspi@1550000 { + qspi: spi@1550000 { compatible = "fsl,ls1021a-qspi"; #address-cells = <1>; #size-cells = <0>; @@ -361,7 +361,7 @@ #thermal-sensor-cells = <1>; }; - dspi: dspi@2100000 { + dspi: spi@2100000 { compatible = "fsl,ls1021a-v1.0-dspi"; #address-cells = <1>; #size-cells = <0>; diff --git a/dts/src/arm64/freescale/fsl-ls208xa.dtsi b/dts/src/arm64/freescale/fsl-ls208xa.dtsi index 8cb78dd996..d188774a36 100644 --- a/dts/src/arm64/freescale/fsl-ls208xa.dtsi +++ b/dts/src/arm64/freescale/fsl-ls208xa.dtsi @@ -22,6 +22,8 @@ crypto = &crypto; serial0 = &serial0; serial1 = &serial1; + serial2 = &serial2; + serial3 = &serial3; }; cpu: cpus { @@ -148,6 +150,7 @@ #address-cells = <2>; #size-cells = <2>; ranges; + dma-ranges = <0x0 0x0 0x0 0x0 0x10000 0x00000000>; clockgen: clocking@1300000 { compatible = "fsl,ls2080a-clockgen"; @@ -221,6 +224,20 @@ interrupts = <0 32 0x4>; /* Level high type */ }; + serial2: serial@21d0500 { + compatible = "fsl,ns16550", "ns16550a"; + reg = <0x0 0x21d0500 0x0 0x100>; + clocks = <&clockgen 4 3>; + interrupts = <0 33 0x4>; /* Level high type */ + }; + + serial3: serial@21d0600 { + compatible = "fsl,ns16550", "ns16550a"; + reg = <0x0 0x21d0600 0x0 0x100>; + clocks = <&clockgen 4 3>; + interrupts = <0 33 0x4>; /* Level high type */ + }; + cluster1_core0_watchdog: wdt@c000000 { compatible = "arm,sp805-wdt", "arm,primecell"; reg = <0x0 0xc000000 0x0 0x1000>; @@ -321,6 +338,8 @@ reg = <0x00000008 0x0c000000 0 0x40>, /* MC portal base */ <0x00000000 0x08340000 0 0x40000>; /* MC control reg */ msi-parent = <&its>; + iommu-map = <0 &smmu 0 0>; /* This is fixed-up by u-boot */ + dma-coherent; #address-cells = <3>; #size-cells = <1>; @@ -424,6 +443,9 @@ compatible = "arm,mmu-500"; reg = <0 0x5000000 0 0x800000>; #global-interrupts = <12>; + #iommu-cells = <1>; + stream-match-mask = <0x7C00>; + dma-coherent; interrupts = <0 13 4>, /* global secure fault */ <0 14 4>, /* combined secure interrupt */ <0 15 4>, /* global non-secure fault */ @@ -466,10 +488,9 @@ <0 204 4>, <0 205 4>, <0 206 4>, <0 207 4>, <0 208 4>, <0 209 4>; - mmu-masters = <&fsl_mc 0x300 0>; }; - dspi: dspi@2100000 { + dspi: spi@2100000 { status = "disabled"; compatible = "fsl,ls2080a-dspi", "fsl,ls2085a-dspi"; #address-cells = <1>; @@ -595,7 +616,7 @@ 3 0 0x5 0x20000000 0x00010000>; }; - qspi: quadspi@20c0000 { + qspi: spi@20c0000 { status = "disabled"; compatible = "fsl,ls2080a-qspi", "fsl,ls1021a-qspi"; #address-cells = <1>; diff --git a/dts/src/arm64/hisilicon/hi3670-hikey970.dts b/dts/src/arm64/hisilicon/hi3670-hikey970.dts new file mode 100644 index 0000000000..4f51186420 --- /dev/null +++ b/dts/src/arm64/hisilicon/hi3670-hikey970.dts @@ -0,0 +1,35 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * dts file for Hisilicon HiKey970 Development Board + * + * Copyright (C) 2016, Hisilicon Ltd. + * Copyright (C) 2018, Linaro Ltd. + * + */ + +/dts-v1/; + +#include "hi3670.dtsi" + +/ { + model = "HiKey970"; + compatible = "hisilicon,hi3670-hikey970", "hisilicon,hi3670"; + + aliases { + serial6 = &uart6; /* console UART */ + }; + + chosen { + stdout-path = "serial6:115200n8"; + }; + + memory@0 { + device_type = "memory"; + /* expect bootloader to fill in this region */ + reg = <0x0 0x0 0x0 0x0>; + }; +}; + +&uart6 { + status = "okay"; +}; diff --git a/dts/src/arm64/hisilicon/hi3670.dtsi b/dts/src/arm64/hisilicon/hi3670.dtsi new file mode 100644 index 0000000000..c90e6f6a34 --- /dev/null +++ b/dts/src/arm64/hisilicon/hi3670.dtsi @@ -0,0 +1,162 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * dts file for Hisilicon Hi3670 SoC + * + * Copyright (C) 2016, Hisilicon Ltd. + * Copyright (C) 2018, Linaro Ltd. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + compatible = "hisilicon,hi3670"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu0>; + }; + core1 { + cpu = <&cpu1>; + }; + core2 { + cpu = <&cpu2>; + }; + core3 { + cpu = <&cpu3>; + }; + }; + cluster1 { + core0 { + cpu = <&cpu4>; + }; + core1 { + cpu = <&cpu5>; + }; + core2 { + cpu = <&cpu6>; + }; + core3 { + cpu = <&cpu7>; + }; + }; + }; + + cpu0: cpu@0 { + compatible = "arm,cortex-a53", "arm,armv8"; + device_type = "cpu"; + reg = <0x0 0x0>; + enable-method = "psci"; + }; + + cpu1: cpu@1 { + compatible = "arm,cortex-a53", "arm,armv8"; + device_type = "cpu"; + reg = <0x0 0x1>; + enable-method = "psci"; + }; + + cpu2: cpu@2 { + compatible = "arm,cortex-a53", "arm,armv8"; + device_type = "cpu"; + reg = <0x0 0x2>; + enable-method = "psci"; + }; + + cpu3: cpu@3 { + compatible = "arm,cortex-a53", "arm,armv8"; + device_type = "cpu"; + reg = <0x0 0x3>; + enable-method = "psci"; + }; + + cpu4: cpu@100 { + compatible = "arm,cortex-a73", "arm,armv8"; + device_type = "cpu"; + reg = <0x0 0x100>; + enable-method = "psci"; + }; + + cpu5: cpu@101 { + compatible = "arm,cortex-a73", "arm,armv8"; + device_type = "cpu"; + reg = <0x0 0x101>; + enable-method = "psci"; + }; + + cpu6: cpu@102 { + compatible = "arm,cortex-a73", "arm,armv8"; + device_type = "cpu"; + reg = <0x0 0x102>; + enable-method = "psci"; + }; + + cpu7: cpu@103 { + compatible = "arm,cortex-a73", "arm,armv8"; + device_type = "cpu"; + reg = <0x0 0x103>; + enable-method = "psci"; + }; + }; + + gic: interrupt-controller@e82b0000 { + compatible = "arm,gic-400"; + reg = <0x0 0xe82b1000 0 0x1000>, /* GICD */ + <0x0 0xe82b2000 0 0x2000>, /* GICC */ + <0x0 0xe82b4000 0 0x2000>, /* GICH */ + <0x0 0xe82b6000 0 0x2000>; /* GICV */ + #interrupt-cells = <3>; + #address-cells = <0>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) | + IRQ_TYPE_LEVEL_HIGH)>; + interrupt-controller; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupt-parent = <&gic>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | + IRQ_TYPE_LEVEL_LOW)>; + clock-frequency = <1920000>; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + uart6_clk: clk_19_2M { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <19200000>; + }; + + uart6: serial@fff32000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0 0xfff32000 0x0 0x1000>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&uart6_clk &uart6_clk>; + clock-names = "uartclk", "apb_pclk"; + status = "disabled"; + }; + }; +}; diff --git a/dts/src/arm64/hisilicon/hi6220-coresight.dtsi b/dts/src/arm64/hisilicon/hi6220-coresight.dtsi index 7afee5d508..68c52f1149 100644 --- a/dts/src/arm64/hisilicon/hi6220-coresight.dtsi +++ b/dts/src/arm64/hisilicon/hi6220-coresight.dtsi @@ -20,22 +20,18 @@ clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>; clock-names = "apb_pclk"; - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; + out-ports { + port { soc_funnel_out: endpoint { remote-endpoint = <&etf_in>; }; }; + }; - port@1 { - reg = <0>; + in-ports { + port { soc_funnel_in: endpoint { - slave-mode; remote-endpoint = <&acpu_funnel_out>; }; @@ -49,21 +45,17 @@ clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>; clock-names = "apb_pclk"; - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; + in-ports { + port { etf_in: endpoint { - slave-mode; remote-endpoint = <&soc_funnel_out>; }; }; + }; - port@1 { - reg = <0>; + out-ports { + port { etf_out: endpoint { remote-endpoint = <&replicator_in>; @@ -77,20 +69,20 @@ clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>; clock-names = "apb_pclk"; - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; + in-ports { + port { replicator_in: endpoint { - slave-mode; remote-endpoint = <&etf_out>; }; }; + }; - port@1 { + out-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { reg = <0>; replicator_out0: endpoint { remote-endpoint = @@ -98,7 +90,7 @@ }; }; - port@2 { + port@1 { reg = <1>; replicator_out1: endpoint { remote-endpoint = @@ -114,14 +106,9 @@ clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>; clock-names = "apb_pclk"; - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; + in-ports { + port { etr_in: endpoint { - slave-mode; remote-endpoint = <&replicator_out0>; }; @@ -135,14 +122,9 @@ clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>; clock-names = "apb_pclk"; - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; + in-ports { + port { tpiu_in: endpoint { - slave-mode; remote-endpoint = <&replicator_out1>; }; @@ -156,85 +138,78 @@ clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>; clock-names = "apb_pclk"; - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; + out-ports { + port { acpu_funnel_out: endpoint { remote-endpoint = <&soc_funnel_in>; }; }; + }; - port@1 { + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { reg = <0>; acpu_funnel_in0: endpoint { - slave-mode; remote-endpoint = <&etm0_out>; }; }; - port@2 { + port@1 { reg = <1>; acpu_funnel_in1: endpoint { - slave-mode; remote-endpoint = <&etm1_out>; }; }; - port@3 { + port@2 { reg = <2>; acpu_funnel_in2: endpoint { - slave-mode; remote-endpoint = <&etm2_out>; }; }; - port@4 { + port@3 { reg = <3>; acpu_funnel_in3: endpoint { - slave-mode; remote-endpoint = <&etm3_out>; }; }; - port@5 { + port@4 { reg = <4>; acpu_funnel_in4: endpoint { - slave-mode; remote-endpoint = <&etm4_out>; }; }; - port@6 { + port@5 { reg = <5>; acpu_funnel_in5: endpoint { - slave-mode; remote-endpoint = <&etm5_out>; }; }; - port@7 { + port@6 { reg = <6>; acpu_funnel_in6: endpoint { - slave-mode; remote-endpoint = <&etm6_out>; }; }; - port@8 { + port@7 { reg = <7>; acpu_funnel_in7: endpoint { - slave-mode; remote-endpoint = <&etm7_out>; }; @@ -251,10 +226,12 @@ cpu = <&cpu0>; - port { - etm0_out: endpoint { - remote-endpoint = - <&acpu_funnel_in0>; + out-ports { + port { + etm0_out: endpoint { + remote-endpoint = + <&acpu_funnel_in0>; + }; }; }; }; @@ -268,10 +245,12 @@ cpu = <&cpu1>; - port { - etm1_out: endpoint { - remote-endpoint = - <&acpu_funnel_in1>; + out-ports { + port { + etm1_out: endpoint { + remote-endpoint = + <&acpu_funnel_in1>; + }; }; }; }; @@ -285,10 +264,12 @@ cpu = <&cpu2>; - port { - etm2_out: endpoint { - remote-endpoint = - <&acpu_funnel_in2>; + out-ports { + port { + etm2_out: endpoint { + remote-endpoint = + <&acpu_funnel_in2>; + }; }; }; }; @@ -302,10 +283,12 @@ cpu = <&cpu3>; - port { - etm3_out: endpoint { - remote-endpoint = - <&acpu_funnel_in3>; + out-ports { + port { + etm3_out: endpoint { + remote-endpoint = + <&acpu_funnel_in3>; + }; }; }; }; @@ -319,10 +302,12 @@ cpu = <&cpu4>; - port { - etm4_out: endpoint { - remote-endpoint = - <&acpu_funnel_in4>; + out-ports { + port { + etm4_out: endpoint { + remote-endpoint = + <&acpu_funnel_in4>; + }; }; }; }; @@ -336,10 +321,12 @@ cpu = <&cpu5>; - port { - etm5_out: endpoint { - remote-endpoint = - <&acpu_funnel_in5>; + out-ports { + port { + etm5_out: endpoint { + remote-endpoint = + <&acpu_funnel_in5>; + }; }; }; }; @@ -353,10 +340,12 @@ cpu = <&cpu6>; - port { - etm6_out: endpoint { - remote-endpoint = - <&acpu_funnel_in6>; + out-ports { + port { + etm6_out: endpoint { + remote-endpoint = + <&acpu_funnel_in6>; + }; }; }; }; @@ -370,10 +359,12 @@ cpu = <&cpu7>; - port { - etm7_out: endpoint { - remote-endpoint = - <&acpu_funnel_in7>; + out-ports { + port { + etm7_out: endpoint { + remote-endpoint = + <&acpu_funnel_in7>; + }; }; }; }; diff --git a/dts/src/arm64/hisilicon/hi6220.dtsi b/dts/src/arm64/hisilicon/hi6220.dtsi index 247024df71..97d5bf2c6e 100644 --- a/dts/src/arm64/hisilicon/hi6220.dtsi +++ b/dts/src/arm64/hisilicon/hi6220.dtsi @@ -99,6 +99,7 @@ reg = <0x0 0x1>; enable-method = "psci"; next-level-cache = <&CLUSTER0_L2>; + clocks = <&stub_clock 0>; operating-points-v2 = <&cpu_opp_table>; cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; #cooling-cells = <2>; /* min followed by max */ @@ -111,6 +112,7 @@ reg = <0x0 0x2>; enable-method = "psci"; next-level-cache = <&CLUSTER0_L2>; + clocks = <&stub_clock 0>; operating-points-v2 = <&cpu_opp_table>; cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; #cooling-cells = <2>; /* min followed by max */ @@ -123,6 +125,7 @@ reg = <0x0 0x3>; enable-method = "psci"; next-level-cache = <&CLUSTER0_L2>; + clocks = <&stub_clock 0>; operating-points-v2 = <&cpu_opp_table>; cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; #cooling-cells = <2>; /* min followed by max */ @@ -135,6 +138,7 @@ reg = <0x0 0x100>; enable-method = "psci"; next-level-cache = <&CLUSTER1_L2>; + clocks = <&stub_clock 0>; operating-points-v2 = <&cpu_opp_table>; cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; #cooling-cells = <2>; /* min followed by max */ @@ -147,6 +151,7 @@ reg = <0x0 0x101>; enable-method = "psci"; next-level-cache = <&CLUSTER1_L2>; + clocks = <&stub_clock 0>; operating-points-v2 = <&cpu_opp_table>; cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; #cooling-cells = <2>; /* min followed by max */ @@ -159,6 +164,7 @@ reg = <0x0 0x102>; enable-method = "psci"; next-level-cache = <&CLUSTER1_L2>; + clocks = <&stub_clock 0>; operating-points-v2 = <&cpu_opp_table>; cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; #cooling-cells = <2>; /* min followed by max */ @@ -171,6 +177,7 @@ reg = <0x0 0x103>; enable-method = "psci"; next-level-cache = <&CLUSTER1_L2>; + clocks = <&stub_clock 0>; operating-points-v2 = <&cpu_opp_table>; cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; #cooling-cells = <2>; /* min followed by max */ diff --git a/dts/src/arm64/lg/lg1312.dtsi b/dts/src/arm64/lg/lg1312.dtsi index 860c8fb107..4bde7b6f2b 100644 --- a/dts/src/arm64/lg/lg1312.dtsi +++ b/dts/src/arm64/lg/lg1312.dtsi @@ -168,14 +168,14 @@ clock-names = "apb_pclk"; status="disabled"; }; - spi0: ssp@fe800000 { + spi0: spi@fe800000 { compatible = "arm,pl022", "arm,primecell"; reg = <0x0 0xfe800000 0x1000>; interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk_bus>; clock-names = "apb_pclk"; }; - spi1: ssp@fe900000 { + spi1: spi@fe900000 { compatible = "arm,pl022", "arm,primecell"; reg = <0x0 0xfe900000 0x1000>; interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; diff --git a/dts/src/arm64/lg/lg1313.dtsi b/dts/src/arm64/lg/lg1313.dtsi index 1887af654a..16ced1ff1a 100644 --- a/dts/src/arm64/lg/lg1313.dtsi +++ b/dts/src/arm64/lg/lg1313.dtsi @@ -168,14 +168,14 @@ clock-names = "apb_pclk"; status="disabled"; }; - spi0: ssp@fe800000 { + spi0: spi@fe800000 { compatible = "arm,pl022", "arm,primecell"; reg = <0x0 0xfe800000 0x1000>; interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk_bus>; clock-names = "apb_pclk"; }; - spi1: ssp@fe900000 { + spi1: spi@fe900000 { compatible = "arm,pl022", "arm,primecell"; reg = <0x0 0xfe900000 0x1000>; interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; diff --git a/dts/src/arm64/marvell/armada-372x.dtsi b/dts/src/arm64/marvell/armada-372x.dtsi index 97558a64e2..6800945a88 100644 --- a/dts/src/arm64/marvell/armada-372x.dtsi +++ b/dts/src/arm64/marvell/armada-372x.dtsi @@ -16,7 +16,7 @@ compatible = "marvell,armada3720", "marvell,armada3710"; cpus { - cpu@1 { + cpu1: cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a53","arm,armv8"; reg = <0x1>; diff --git a/dts/src/arm64/marvell/armada-37xx.dtsi b/dts/src/arm64/marvell/armada-37xx.dtsi index d9531e242e..4472bcd8f9 100644 --- a/dts/src/arm64/marvell/armada-37xx.dtsi +++ b/dts/src/arm64/marvell/armada-37xx.dtsi @@ -40,7 +40,7 @@ cpus { #address-cells = <1>; #size-cells = <0>; - cpu@0 { + cpu0: cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a53", "arm,armv8"; reg = <0>; @@ -80,6 +80,19 @@ /* 32M internal register @ 0xd000_0000 */ ranges = <0x0 0x0 0xd0000000 0x2000000>; + wdt: watchdog@8300 { + compatible = "marvell,armada-3700-wdt"; + reg = <0x8300 0x40>; + marvell,system-controller = <&cpu_misc>; + clocks = <&xtalclk>; + }; + + cpu_misc: system-controller@d000 { + compatible = "marvell,armada-3700-cpu-misc", + "syscon"; + reg = <0xd000 0x1000>; + }; + spi0: spi@10600 { compatible = "marvell,armada-3700-spi"; #address-cells = <1>; diff --git a/dts/src/arm64/marvell/armada-8040-clearfog-gt-8k.dts b/dts/src/arm64/marvell/armada-8040-clearfog-gt-8k.dts new file mode 100644 index 0000000000..9473d40a29 --- /dev/null +++ b/dts/src/arm64/marvell/armada-8040-clearfog-gt-8k.dts @@ -0,0 +1,441 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2018 SolidRun ltd. + * Based on Marvell MACCHIATOBin board + * + * Device Tree file for SolidRun's ClearFog GT 8K + */ + +#include "armada-8040.dtsi" + +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "SolidRun ClearFog GT 8K"; + compatible = "solidrun,clearfog-gt-8k", "marvell,armada8040", + "marvell,armada-ap806-quad", "marvell,armada-ap806"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@00000000 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; + + aliases { + ethernet0 = &cp1_eth1; + ethernet1 = &cp0_eth0; + ethernet2 = &cp1_eth2; + }; + + v_3_3: regulator-3-3v { + compatible = "regulator-fixed"; + regulator-name = "v_3_3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + status = "okay"; + }; + + v_5v0_usb3_hst_vbus: regulator-usb3-vbus0 { + compatible = "regulator-fixed"; + gpio = <&cp0_gpio2 15 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&cp0_xhci_vbus_pins>; + regulator-name = "v_5v0_usb3_hst_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + status = "okay"; + }; + + usb3h0_phy: usb3_phy0 { + compatible = "usb-nop-xceiv"; + vcc-supply = <&v_5v0_usb3_hst_vbus>; + }; + + sfp_cp0_eth0: sfp-cp0-eth0 { + compatible = "sff,sfp"; + i2c-bus = <&cp0_i2c1>; + mod-def0-gpio = <&cp0_gpio2 17 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&cp1_gpio1 29 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&cp0_sfp_present_pins &cp1_sfp_tx_disable_pins>; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-0 = <&cp0_led0_pins + &cp0_led1_pins>; + pinctrl-names = "default"; + /* No designated function for these LEDs at the moment */ + led0 { + label = "clearfog-gt-8k:green:led0"; + gpios = <&cp0_gpio2 8 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + led1 { + label = "clearfog-gt-8k:green:led1"; + gpios = <&cp0_gpio2 9 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + }; + + keys { + compatible = "gpio-keys"; + pinctrl-0 = <&cp0_gpio_reset_pins &cp1_wps_button_pins>; + pinctrl-names = "default"; + + button_0 { + /* The rear button */ + label = "Rear Button"; + gpios = <&cp0_gpio2 7 GPIO_ACTIVE_LOW>; + linux,can-disable; + linux,code = <BTN_0>; + }; + + button_1 { + /* The wps button */ + label = "WPS Button"; + gpios = <&cp1_gpio1 30 GPIO_ACTIVE_LOW>; + linux,can-disable; + linux,code = <KEY_WPS_BUTTON>; + }; + }; +}; + +&uart0 { + status = "okay"; + pinctrl-0 = <&uart0_pins>; + pinctrl-names = "default"; +}; + +&ap_sdhci0 { + bus-width = <8>; + no-1-8-v; + no-sd; + no-sdio; + non-removable; + status = "okay"; + vqmmc-supply = <&v_3_3>; +}; + +&cp0_i2c0 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&cp0_i2c0_pins>; + status = "okay"; +}; + +&cp0_i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&cp0_i2c1_pins>; + status = "okay"; +}; + +&cp0_pinctrl { + /* + * MPP Bus: + * [0-31] = 0xff: Keep default CP0_shared_pins: + * [11] CLKOUT_MPP_11 (out) + * [23] LINK_RD_IN_CP2CP (in) + * [25] CLKOUT_MPP_25 (out) + * [29] AVS_FB_IN_CP2CP (in) + * [32, 33, 34] pci0/1/2 reset + * [35-38] CP0 I2C1 and I2C0 + * [39] GPIO reset button + * [40,41] LED0 and LED1 + * [43] 1512 phy reset + * [47] USB VBUS EN (active low) + * [48] FAN PWM + * [49] SFP+ present signal + * [50] TPM interrupt + * [51] WLAN0 disable + * [52] WLAN1 disable + * [53] LTE disable + * [54] NFC reset + * [55] Micro SD card detect + * [56-61] Micro SD + */ + + cp0_pci0_reset_pins: pci0-reset-pins { + marvell,pins = "mpp32"; + marvell,function = "gpio"; + }; + + cp0_pci1_reset_pins: pci1-reset-pins { + marvell,pins = "mpp33"; + marvell,function = "gpio"; + }; + + cp0_pci2_reset_pins: pci2-reset-pins { + marvell,pins = "mpp34"; + marvell,function = "gpio"; + }; + + cp0_i2c1_pins: i2c1-pins { + marvell,pins = "mpp35", "mpp36"; + marvell,function = "i2c1"; + }; + + cp0_i2c0_pins: i2c0-pins { + marvell,pins = "mpp37", "mpp38"; + marvell,function = "i2c0"; + }; + + cp0_gpio_reset_pins: gpio-reset-pins { + marvell,pins = "mpp39"; + marvell,function = "gpio"; + }; + + cp0_led0_pins: led0-pins { + marvell,pins = "mpp40"; + marvell,function = "gpio"; + }; + + cp0_led1_pins: led1-pins { + marvell,pins = "mpp41"; + marvell,function = "gpio"; + }; + + cp0_copper_eth_phy_reset: copper-eth-phy-reset { + marvell,pins = "mpp43"; + marvell,function = "gpio"; + }; + + cp0_xhci_vbus_pins: xhci0-vbus-pins { + marvell,pins = "mpp47"; + marvell,function = "gpio"; + }; + + cp0_fan_pwm_pins: fan-pwm-pins { + marvell,pins = "mpp48"; + marvell,function = "gpio"; + }; + + cp0_sfp_present_pins: sfp-present-pins { + marvell,pins = "mpp49"; + marvell,function = "gpio"; + }; + + cp0_tpm_irq_pins: tpm-irq-pins { + marvell,pins = "mpp50"; + marvell,function = "gpio"; + }; + + cp0_sdhci_pins: sdhci-pins { + marvell,pins = "mpp55", "mpp56", "mpp57", "mpp58", "mpp59", + "mpp60", "mpp61"; + marvell,function = "sdio"; + }; +}; + +&cp0_pcie0 { + pinctrl-names = "default"; + pinctrl-0 = <&cp0_pci0_reset_pins>; + reset-gpios = <&cp0_gpio2 0 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&cp0_gpio2 { + sata_reset { + gpio-hog; + gpios = <1 GPIO_ACTIVE_HIGH>; + output-high; + }; +}; + +&cp0_ethernet { + status = "okay"; +}; + +/* SFP */ +&cp0_eth0 { + status = "okay"; + phy-mode = "10gbase-kr"; + managed = "in-band-status"; + phys = <&cp0_comphy2 0>; + sfp = <&sfp_cp0_eth0>; +}; + +&cp0_sdhci0 { + broken-cd; + bus-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&cp0_sdhci_pins>; + status = "okay"; + vqmmc-supply = <&v_3_3>; +}; + +&cp1_pinctrl { + /* + * MPP Bus: + * [0-5] TDM + * [6] VHV Enable + * [7] CP1 SPI0 CSn1 (FXS) + * [8] CP1 SPI0 CSn0 (TPM) + * [9.11]CP1 SPI0 MOSI/MISO/CLK + * [13] CP1 SPI1 MISO (TDM and SPI ROM shared) + * [14] CP1 SPI1 CS0n (64Mb SPI ROM) + * [15] CP1 SPI1 MOSI (TDM and SPI ROM shared) + * [16] CP1 SPI1 CLK (TDM and SPI ROM shared) + * [24] Topaz switch reset + * [26] Buzzer + * [27] CP1 SMI MDIO + * [28] CP1 SMI MDC + * [29] CP0 10G SFP TX Disable + * [30] WPS button + * [31] Front panel button + */ + + cp1_spi1_pins: spi1-pins { + marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16"; + marvell,function = "spi1"; + }; + + cp1_switch_reset_pins: switch-reset-pins { + marvell,pins = "mpp24"; + marvell,function = "gpio"; + }; + + cp1_ge_mdio_pins: ge-mdio-pins { + marvell,pins = "mpp27", "mpp28"; + marvell,function = "ge"; + }; + + cp1_sfp_tx_disable_pins: sfp-tx-disable-pins { + marvell,pins = "mpp29"; + marvell,function = "gpio"; + }; + + cp1_wps_button_pins: wps-button-pins { + marvell,pins = "mpp30"; + marvell,function = "gpio"; + }; +}; + +&cp1_sata0 { + pinctrl-0 = <&cp0_pci1_reset_pins>; + status = "okay"; +}; + +&cp1_mdio { + pinctrl-names = "default"; + pinctrl-0 = <&cp1_ge_mdio_pins>; + status = "okay"; + + ge_phy: ethernet-phy@0 { + /* LED0 - GB link + * LED1 - on: link, blink: activity + */ + marvell,reg-init = <3 16 0 0x1017>; + reg = <0>; + }; + + switch0: switch0@4 { + compatible = "marvell,mv88e6085"; + reg = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&cp1_switch_reset_pins>; + reset-gpios = <&cp1_gpio1 24 GPIO_ACTIVE_LOW>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + label = "lan2"; + phy-handle = <&switch0phy0>; + }; + + port@2 { + reg = <2>; + label = "lan1"; + phy-handle = <&switch0phy1>; + }; + + port@3 { + reg = <3>; + label = "lan4"; + phy-handle = <&switch0phy2>; + }; + + port@4 { + reg = <4>; + label = "lan3"; + phy-handle = <&switch0phy3>; + }; + + port@5 { + reg = <5>; + label = "cpu"; + ethernet = <&cp1_eth2>; + }; + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch0phy0: switch0phy0@11 { + reg = <0x11>; + }; + + switch0phy1: switch0phy1@12 { + reg = <0x12>; + }; + + switch0phy2: switch0phy2@13 { + reg = <0x13>; + }; + + switch0phy3: switch0phy3@14 { + reg = <0x14>; + }; + }; + }; +}; + +&cp1_ethernet { + status = "okay"; +}; + +/* 1G copper */ +&cp1_eth1 { + status = "okay"; + phy-mode = "sgmii"; + phy = <&ge_phy>; + phys = <&cp1_comphy3 1>; +}; + +/* Switch uplink */ +&cp1_eth2 { + status = "okay"; + phy-mode = "2500base-x"; + phys = <&cp1_comphy5 2>; + fixed-link { + speed = <2500>; + full-duplex; + }; +}; + +&cp1_spi1 { + pinctrl-names = "default"; + pinctrl-0 = <&cp1_spi1_pins>; + status = "okay"; + + spi-flash@0 { + compatible = "st,w25q32"; + spi-max-frequency = <50000000>; + reg = <0>; + }; +}; + +&cp1_usb3_0 { + usb-phy = <&usb3h0_phy>; + status = "okay"; +}; diff --git a/dts/src/arm64/marvell/armada-ap806-dual.dtsi b/dts/src/arm64/marvell/armada-ap806-dual.dtsi index 64b5e61a69..d3c0636558 100644 --- a/dts/src/arm64/marvell/armada-ap806-dual.dtsi +++ b/dts/src/arm64/marvell/armada-ap806-dual.dtsi @@ -15,13 +15,13 @@ #address-cells = <1>; #size-cells = <0>; - cpu@0 { + cpu0: cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a72", "arm,armv8"; reg = <0x000>; enable-method = "psci"; }; - cpu@1 { + cpu1: cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a72", "arm,armv8"; reg = <0x001>; diff --git a/dts/src/arm64/marvell/armada-ap806-quad.dtsi b/dts/src/arm64/marvell/armada-ap806-quad.dtsi index 746e792767..64632c8738 100644 --- a/dts/src/arm64/marvell/armada-ap806-quad.dtsi +++ b/dts/src/arm64/marvell/armada-ap806-quad.dtsi @@ -15,29 +15,33 @@ #address-cells = <1>; #size-cells = <0>; - cpu@0 { + cpu0: cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a72", "arm,armv8"; reg = <0x000>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; }; - cpu@1 { + cpu1: cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a72", "arm,armv8"; reg = <0x001>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; }; - cpu@100 { + cpu2: cpu@100 { device_type = "cpu"; compatible = "arm,cortex-a72", "arm,armv8"; reg = <0x100>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; }; - cpu@101 { + cpu3: cpu@101 { device_type = "cpu"; compatible = "arm,cortex-a72", "arm,armv8"; reg = <0x101>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; }; }; }; diff --git a/dts/src/arm64/marvell/armada-ap806.dtsi b/dts/src/arm64/marvell/armada-ap806.dtsi index 176e38d548..073610ac0a 100644 --- a/dts/src/arm64/marvell/armada-ap806.dtsi +++ b/dts/src/arm64/marvell/armada-ap806.dtsi @@ -6,6 +6,7 @@ */ #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/thermal/thermal.h> /dts-v1/; @@ -27,6 +28,33 @@ method = "smc"; }; + cpus { + #address-cells = <1>; + #size-cells = <0>; + + idle_states { + entry_method = "arm,pcsi"; + + CPU_SLEEP_0: cpu-sleep-0 { + compatible = "arm,idle-state"; + local-timer-stop; + arm,psci-suspend-param = <0x0010000>; + entry-latency-us = <80>; + exit-latency-us = <160>; + min-residency-us = <320>; + }; + + CLUSTER_SLEEP_0: cluster-sleep-0 { + compatible = "arm,idle-state"; + local-timer-stop; + arm,psci-suspend-param = <0x1010000>; + entry-latency-us = <500>; + exit-latency-us = <1000>; + min-residency-us = <2500>; + }; + }; + }; + ap806 { #address-cells = <2>; #size-cells = <2>; @@ -124,6 +152,15 @@ interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>; }; + sei: interrupt-controller@3f0200 { + compatible = "marvell,ap806-sei"; + reg = <0x3f0200 0x40>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <1>; + interrupt-controller; + msi-controller; + }; + xor@400000 { compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; reg = <0x400000 0x1000>, @@ -247,11 +284,76 @@ }; }; - ap_thermal: thermal@6f808c { - compatible = "marvell,armada-ap806-thermal"; - reg = <0x6f808c 0x4>, - <0x6f8084 0x8>; + ap_syscon1: system-controller@6f8000 { + compatible = "syscon", "simple-mfd"; + reg = <0x6f8000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + + ap_thermal: thermal-sensor@80 { + compatible = "marvell,armada-ap806-thermal"; + reg = <0x80 0x10>; + #thermal-sensor-cells = <1>; + }; }; }; }; + + /* + * The thermal IP features one internal sensor plus, if applicable, one + * remote channel wired to one sensor per CPU. + * + * The cooling maps are always empty as there are no cooling devices. + */ + thermal-zones { + ap_thermal_ic: ap-thermal-ic { + polling-delay-passive = <1000>; + polling-delay = <1000>; + + thermal-sensors = <&ap_thermal 0>; + + trips { }; + cooling-maps { }; + }; + + ap_thermal_cpu1: ap-thermal-cpu1 { + polling-delay-passive = <1000>; + polling-delay = <1000>; + + thermal-sensors = <&ap_thermal 1>; + + trips { }; + cooling-maps { }; + }; + + ap_thermal_cpu2: ap-thermal-cpu2 { + polling-delay-passive = <1000>; + polling-delay = <1000>; + + thermal-sensors = <&ap_thermal 2>; + + trips { }; + cooling-maps { }; + }; + + ap_thermal_cpu3: ap-thermal-cpu3 { + polling-delay-passive = <1000>; + polling-delay = <1000>; + + thermal-sensors = <&ap_thermal 3>; + + trips { }; + cooling-maps { }; + }; + + ap_thermal_cpu4: ap-thermal-cpu4 { + polling-delay-passive = <1000>; + polling-delay = <1000>; + + thermal-sensors = <&ap_thermal 4>; + + trips { }; + cooling-maps { }; + }; + }; }; diff --git a/dts/src/arm64/marvell/armada-ap810-ap0-octa-core.dtsi b/dts/src/arm64/marvell/armada-ap810-ap0-octa-core.dtsi index 7d00ae78fc..b788cb63ca 100644 --- a/dts/src/arm64/marvell/armada-ap810-ap0-octa-core.dtsi +++ b/dts/src/arm64/marvell/armada-ap810-ap0-octa-core.dtsi @@ -13,49 +13,49 @@ #size-cells = <0>; compatible = "marvell,armada-ap810-octa"; - cpu@0 { + cpu0: cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a72", "arm,armv8"; reg = <0x000>; enable-method = "psci"; }; - cpu@1 { + cpu1: cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a72", "arm,armv8"; reg = <0x001>; enable-method = "psci"; }; - cpu@100 { + cpu2: cpu@100 { device_type = "cpu"; compatible = "arm,cortex-a72", "arm,armv8"; reg = <0x100>; enable-method = "psci"; }; - cpu@101 { + cpu3: cpu@101 { device_type = "cpu"; compatible = "arm,cortex-a72", "arm,armv8"; reg = <0x101>; enable-method = "psci"; }; - cpu@200 { + cpu4: cpu@200 { device_type = "cpu"; compatible = "arm,cortex-a72", "arm,armv8"; reg = <0x200>; enable-method = "psci"; }; - cpu@201 { + cpu5: cpu@201 { device_type = "cpu"; compatible = "arm,cortex-a72", "arm,armv8"; reg = <0x201>; enable-method = "psci"; }; - cpu@300 { + cpu6: cpu@300 { device_type = "cpu"; compatible = "arm,cortex-a72", "arm,armv8"; reg = <0x300>; enable-method = "psci"; }; - cpu@301 { + cpu7: cpu@301 { device_type = "cpu"; compatible = "arm,cortex-a72", "arm,armv8"; reg = <0x301>; diff --git a/dts/src/arm64/marvell/armada-common.dtsi b/dts/src/arm64/marvell/armada-common.dtsi index d5e8aedec1..b29c6405d2 100644 --- a/dts/src/arm64/marvell/armada-common.dtsi +++ b/dts/src/arm64/marvell/armada-common.dtsi @@ -7,4 +7,5 @@ #define PASTER(x, y) x ## y #define EVALUATOR(x, y) PASTER(x, y) #define CP110_LABEL(name) EVALUATOR(CP110_NAME, EVALUATOR(_, name)) +#define CP110_NODE_NAME(name) EVALUATOR(CP110_NAME, EVALUATOR(-, name)) #define ADDRESSIFY(addr) EVALUATOR(0x, addr) diff --git a/dts/src/arm64/marvell/armada-cp110.dtsi b/dts/src/arm64/marvell/armada-cp110.dtsi index 840c8454d0..b9d9f31e3b 100644 --- a/dts/src/arm64/marvell/armada-cp110.dtsi +++ b/dts/src/arm64/marvell/armada-cp110.dtsi @@ -6,6 +6,7 @@ */ #include <dt-bindings/interrupt-controller/mvebu-icu.h> +#include <dt-bindings/thermal/thermal.h> #include "armada-common.dtsi" @@ -19,13 +20,30 @@ * save one indentation level */ CP110_NAME: CP110_NAME { }; + + /* + * CPs only have one sensor in the thermal IC. + * + * The cooling maps are empty as there are no cooling devices. + */ + thermal-zones { + CP110_LABEL(thermal_ic): CP110_NODE_NAME(thermal-ic) { + polling-delay-passive = <1000>; + polling-delay = <1000>; + + thermal-sensors = <&CP110_LABEL(thermal) 0>; + + trips { }; + cooling-maps { }; + }; + }; }; &CP110_NAME { #address-cells = <2>; #size-cells = <2>; compatible = "simple-bus"; - interrupt-parent = <&CP110_LABEL(icu)>; + interrupt-parent = <&CP110_LABEL(icu_nsr)>; ranges; config-space@CP110_BASE { @@ -47,42 +65,57 @@ dma-coherent; CP110_LABEL(eth0): eth0 { - interrupts = <ICU_GRP_NSR 39 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 43 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 47 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 51 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 55 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 129 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2", - "tx-cpu3", "rx-shared", "link"; + interrupts = <39 IRQ_TYPE_LEVEL_HIGH>, + <43 IRQ_TYPE_LEVEL_HIGH>, + <47 IRQ_TYPE_LEVEL_HIGH>, + <51 IRQ_TYPE_LEVEL_HIGH>, + <55 IRQ_TYPE_LEVEL_HIGH>, + <59 IRQ_TYPE_LEVEL_HIGH>, + <63 IRQ_TYPE_LEVEL_HIGH>, + <67 IRQ_TYPE_LEVEL_HIGH>, + <71 IRQ_TYPE_LEVEL_HIGH>, + <129 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hif0", "hif1", "hif2", + "hif3", "hif4", "hif5", "hif6", "hif7", + "hif8", "link"; port-id = <0>; gop-port-id = <0>; status = "disabled"; }; CP110_LABEL(eth1): eth1 { - interrupts = <ICU_GRP_NSR 40 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 44 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 48 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 52 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 56 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 128 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2", - "tx-cpu3", "rx-shared", "link"; + interrupts = <40 IRQ_TYPE_LEVEL_HIGH>, + <44 IRQ_TYPE_LEVEL_HIGH>, + <48 IRQ_TYPE_LEVEL_HIGH>, + <52 IRQ_TYPE_LEVEL_HIGH>, + <56 IRQ_TYPE_LEVEL_HIGH>, + <60 IRQ_TYPE_LEVEL_HIGH>, + <64 IRQ_TYPE_LEVEL_HIGH>, + <68 IRQ_TYPE_LEVEL_HIGH>, + <72 IRQ_TYPE_LEVEL_HIGH>, + <128 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hif0", "hif1", "hif2", + "hif3", "hif4", "hif5", "hif6", "hif7", + "hif8", "link"; port-id = <1>; gop-port-id = <2>; status = "disabled"; }; CP110_LABEL(eth2): eth2 { - interrupts = <ICU_GRP_NSR 41 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 45 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 49 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 53 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 57 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 127 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2", - "tx-cpu3", "rx-shared", "link"; + interrupts = <41 IRQ_TYPE_LEVEL_HIGH>, + <45 IRQ_TYPE_LEVEL_HIGH>, + <49 IRQ_TYPE_LEVEL_HIGH>, + <53 IRQ_TYPE_LEVEL_HIGH>, + <57 IRQ_TYPE_LEVEL_HIGH>, + <61 IRQ_TYPE_LEVEL_HIGH>, + <65 IRQ_TYPE_LEVEL_HIGH>, + <69 IRQ_TYPE_LEVEL_HIGH>, + <73 IRQ_TYPE_LEVEL_HIGH>, + <127 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hif0", "hif1", "hif2", + "hif3", "hif4", "hif5", "hif6", "hif7", + "hif8", "link"; port-id = <2>; gop-port-id = <3>; status = "disabled"; @@ -150,22 +183,31 @@ CP110_LABEL(icu): interrupt-controller@1e0000 { compatible = "marvell,cp110-icu"; reg = <0x1e0000 0x440>; - #interrupt-cells = <3>; - interrupt-controller; - msi-parent = <&gicp>; + #address-cells = <1>; + #size-cells = <1>; + + CP110_LABEL(icu_nsr): interrupt-controller@10 { + compatible = "marvell,cp110-icu-nsr"; + reg = <0x10 0x20>; + #interrupt-cells = <2>; + interrupt-controller; + msi-parent = <&gicp>; + }; + + CP110_LABEL(icu_sei): interrupt-controller@50 { + compatible = "marvell,cp110-icu-sei"; + reg = <0x50 0x10>; + #interrupt-cells = <2>; + interrupt-controller; + msi-parent = <&sei>; + }; }; CP110_LABEL(rtc): rtc@284000 { compatible = "marvell,armada-8k-rtc"; reg = <0x284000 0x20>, <0x284080 0x24>; reg-names = "rtc", "rtc-soc"; - interrupts = <ICU_GRP_NSR 77 IRQ_TYPE_LEVEL_HIGH>; - }; - - CP110_LABEL(thermal): thermal@400078 { - compatible = "marvell,armada-cp110-thermal"; - reg = <0x400078 0x4>, - <0x400070 0x8>; + interrupts = <77 IRQ_TYPE_LEVEL_HIGH>; }; CP110_LABEL(syscon0): system-controller@440000 { @@ -185,10 +227,10 @@ #gpio-cells = <2>; gpio-ranges = <&CP110_LABEL(pinctrl) 0 0 32>; interrupt-controller; - interrupts = <ICU_GRP_NSR 86 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 85 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 84 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 83 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <86 IRQ_TYPE_LEVEL_HIGH>, + <85 IRQ_TYPE_LEVEL_HIGH>, + <84 IRQ_TYPE_LEVEL_HIGH>, + <83 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -200,20 +242,33 @@ #gpio-cells = <2>; gpio-ranges = <&CP110_LABEL(pinctrl) 0 32 31>; interrupt-controller; - interrupts = <ICU_GRP_NSR 82 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 81 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 80 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 79 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <82 IRQ_TYPE_LEVEL_HIGH>, + <81 IRQ_TYPE_LEVEL_HIGH>, + <80 IRQ_TYPE_LEVEL_HIGH>, + <79 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; }; + CP110_LABEL(syscon1): system-controller@400000 { + compatible = "syscon", "simple-mfd"; + reg = <0x400000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + + CP110_LABEL(thermal): thermal-sensor@70 { + compatible = "marvell,armada-cp110-thermal"; + reg = <0x70 0x10>; + #thermal-sensor-cells = <1>; + }; + }; + CP110_LABEL(usb3_0): usb3@500000 { compatible = "marvell,armada-8k-xhci", "generic-xhci"; reg = <0x500000 0x4000>; dma-coherent; - interrupts = <ICU_GRP_NSR 106 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <106 IRQ_TYPE_LEVEL_HIGH>; clock-names = "core", "reg"; clocks = <&CP110_LABEL(clk) 1 22>, <&CP110_LABEL(clk) 1 16>; @@ -225,7 +280,7 @@ "generic-xhci"; reg = <0x510000 0x4000>; dma-coherent; - interrupts = <ICU_GRP_NSR 105 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <105 IRQ_TYPE_LEVEL_HIGH>; clock-names = "core", "reg"; clocks = <&CP110_LABEL(clk) 1 23>, <&CP110_LABEL(clk) 1 16>; @@ -237,7 +292,7 @@ "generic-ahci"; reg = <0x540000 0x30000>; dma-coherent; - interrupts = <ICU_GRP_NSR 107 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <107 IRQ_TYPE_LEVEL_HIGH>; clocks = <&CP110_LABEL(clk) 1 15>, <&CP110_LABEL(clk) 1 16>; status = "disabled"; @@ -290,7 +345,7 @@ reg = <0x701000 0x20>; #address-cells = <1>; #size-cells = <0>; - interrupts = <ICU_GRP_NSR 120 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <120 IRQ_TYPE_LEVEL_HIGH>; clock-names = "core", "reg"; clocks = <&CP110_LABEL(clk) 1 21>, <&CP110_LABEL(clk) 1 17>; @@ -302,7 +357,7 @@ reg = <0x701100 0x20>; #address-cells = <1>; #size-cells = <0>; - interrupts = <ICU_GRP_NSR 121 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <121 IRQ_TYPE_LEVEL_HIGH>; clock-names = "core", "reg"; clocks = <&CP110_LABEL(clk) 1 21>, <&CP110_LABEL(clk) 1 17>; @@ -313,7 +368,7 @@ compatible = "snps,dw-apb-uart"; reg = <0x702000 0x100>; reg-shift = <2>; - interrupts = <ICU_GRP_NSR 122 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <122 IRQ_TYPE_LEVEL_HIGH>; reg-io-width = <1>; clock-names = "baudclk", "apb_pclk"; clocks = <&CP110_LABEL(clk) 1 21>, @@ -325,7 +380,7 @@ compatible = "snps,dw-apb-uart"; reg = <0x702100 0x100>; reg-shift = <2>; - interrupts = <ICU_GRP_NSR 123 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <123 IRQ_TYPE_LEVEL_HIGH>; reg-io-width = <1>; clock-names = "baudclk", "apb_pclk"; clocks = <&CP110_LABEL(clk) 1 21>, @@ -337,7 +392,7 @@ compatible = "snps,dw-apb-uart"; reg = <0x702200 0x100>; reg-shift = <2>; - interrupts = <ICU_GRP_NSR 124 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <124 IRQ_TYPE_LEVEL_HIGH>; reg-io-width = <1>; clock-names = "baudclk", "apb_pclk"; clocks = <&CP110_LABEL(clk) 1 21>, @@ -349,7 +404,7 @@ compatible = "snps,dw-apb-uart"; reg = <0x702300 0x100>; reg-shift = <2>; - interrupts = <ICU_GRP_NSR 125 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <125 IRQ_TYPE_LEVEL_HIGH>; reg-io-width = <1>; clock-names = "baudclk", "apb_pclk"; clocks = <&CP110_LABEL(clk) 1 21>, @@ -368,7 +423,7 @@ reg = <0x720000 0x54>; #address-cells = <1>; #size-cells = <0>; - interrupts = <ICU_GRP_NSR 115 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <115 IRQ_TYPE_LEVEL_HIGH>; clock-names = "core", "reg"; clocks = <&CP110_LABEL(clk) 1 2>, <&CP110_LABEL(clk) 1 17>; @@ -380,7 +435,7 @@ compatible = "marvell,armada-8k-rng", "inside-secure,safexcel-eip76"; reg = <0x760000 0x7d>; - interrupts = <ICU_GRP_NSR 95 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <95 IRQ_TYPE_LEVEL_HIGH>; clock-names = "core", "reg"; clocks = <&CP110_LABEL(clk) 1 25>, <&CP110_LABEL(clk) 1 17>; @@ -390,7 +445,7 @@ CP110_LABEL(sdhci0): sdhci@780000 { compatible = "marvell,armada-cp110-sdhci"; reg = <0x780000 0x300>; - interrupts = <ICU_GRP_NSR 27 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <27 IRQ_TYPE_LEVEL_HIGH>; clock-names = "core", "axi"; clocks = <&CP110_LABEL(clk) 1 4>, <&CP110_LABEL(clk) 1 18>; dma-coherent; @@ -400,12 +455,12 @@ CP110_LABEL(crypto): crypto@800000 { compatible = "inside-secure,safexcel-eip197b"; reg = <0x800000 0x200000>; - interrupts = <ICU_GRP_NSR 87 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 88 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 89 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 90 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 91 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 92 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <87 IRQ_TYPE_LEVEL_HIGH>, + <88 IRQ_TYPE_LEVEL_HIGH>, + <89 IRQ_TYPE_LEVEL_HIGH>, + <90 IRQ_TYPE_LEVEL_HIGH>, + <91 IRQ_TYPE_LEVEL_HIGH>, + <92 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "mem", "ring0", "ring1", "ring2", "ring3", "eip"; clock-names = "core", "reg"; @@ -434,8 +489,8 @@ /* non-prefetchable memory */ 0x82000000 0 CP110_PCIEx_MEM_BASE(0) 0 CP110_PCIEx_MEM_BASE(0) 0 0xf00000>; interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &CP110_LABEL(icu) ICU_GRP_NSR 22 IRQ_TYPE_LEVEL_HIGH>; - interrupts = <ICU_GRP_NSR 22 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map = <0 0 0 0 &CP110_LABEL(icu_nsr) 22 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <22 IRQ_TYPE_LEVEL_HIGH>; num-lanes = <1>; clock-names = "core", "reg"; clocks = <&CP110_LABEL(clk) 1 13>, <&CP110_LABEL(clk) 1 14>; @@ -461,8 +516,8 @@ /* non-prefetchable memory */ 0x82000000 0 CP110_PCIEx_MEM_BASE(1) 0 CP110_PCIEx_MEM_BASE(1) 0 0xf00000>; interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &CP110_LABEL(icu) ICU_GRP_NSR 24 IRQ_TYPE_LEVEL_HIGH>; - interrupts = <ICU_GRP_NSR 24 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map = <0 0 0 0 &CP110_LABEL(icu_nsr) 24 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; num-lanes = <1>; clock-names = "core", "reg"; @@ -489,8 +544,8 @@ /* non-prefetchable memory */ 0x82000000 0 CP110_PCIEx_MEM_BASE(2) 0 CP110_PCIEx_MEM_BASE(2) 0 0xf00000>; interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &CP110_LABEL(icu) ICU_GRP_NSR 23 IRQ_TYPE_LEVEL_HIGH>; - interrupts = <ICU_GRP_NSR 23 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map = <0 0 0 0 &CP110_LABEL(icu_nsr) 23 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <23 IRQ_TYPE_LEVEL_HIGH>; num-lanes = <1>; clock-names = "core", "reg"; diff --git a/dts/src/arm64/mediatek/mt2712e.dtsi b/dts/src/arm64/mediatek/mt2712e.dtsi index 75cc0f7cc0..ee627a7c7b 100644 --- a/dts/src/arm64/mediatek/mt2712e.dtsi +++ b/dts/src/arm64/mediatek/mt2712e.dtsi @@ -301,6 +301,17 @@ status = "disabled"; }; + spis1: spi@10013000 { + compatible = "mediatek,mt2712-spi-slave"; + reg = <0 0x10013000 0 0x100>; + interrupts = <GIC_SPI 283 IRQ_TYPE_LEVEL_LOW>; + clocks = <&infracfg CLK_INFRA_AO_SPI1>; + clock-names = "spi"; + assigned-clocks = <&topckgen CLK_TOP_SPISLV_SEL>; + assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL1_D2>; + status = "disabled"; + }; + apmixedsys: syscon@10209000 { compatible = "mediatek,mt2712-apmixedsys", "syscon"; reg = <0 0x10209000 0 0x1000>; diff --git a/dts/src/arm64/mediatek/mt7622-bananapi-bpi-r64.dts b/dts/src/arm64/mediatek/mt7622-bananapi-bpi-r64.dts new file mode 100644 index 0000000000..5d6005c9b0 --- /dev/null +++ b/dts/src/arm64/mediatek/mt7622-bananapi-bpi-r64.dts @@ -0,0 +1,530 @@ +/* + * Copyright (c) 2018 MediaTek Inc. + * Author: Ryder Lee <ryder.lee@mediatek.com> + * + * SPDX-License-Identifier: (GPL-2.0 OR MIT) + */ + +/dts-v1/; +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/gpio.h> + +#include "mt7622.dtsi" +#include "mt6380.dtsi" + +/ { + model = "Bananapi BPI-R64"; + compatible = "bananapi,bpi-r64", "mediatek,mt7622"; + + chosen { + bootargs = "earlycon=uart8250,mmio32,0x11002000 console=ttyS0,115200n1 swiotlb=512"; + }; + + cpus { + cpu@0 { + proc-supply = <&mt6380_vcpu_reg>; + sram-supply = <&mt6380_vm_reg>; + }; + + cpu@1 { + proc-supply = <&mt6380_vcpu_reg>; + sram-supply = <&mt6380_vm_reg>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + factory { + label = "factory"; + linux,code = <BTN_0>; + gpios = <&pio 0 GPIO_ACTIVE_HIGH>; + }; + + wps { + label = "wps"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&pio 102 GPIO_ACTIVE_HIGH>; + }; + }; + + leds { + compatible = "gpio-leds"; + + green { + label = "bpi-r64:pio:green"; + gpios = <&pio 89 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + red { + label = "bpi-r64:pio:red"; + gpios = <&pio 88 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; + + memory { + reg = <0 0x40000000 0 0x40000000>; + }; + + reg_1p8v: regulator-1p8v { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_5v: regulator-5v { + compatible = "regulator-fixed"; + regulator-name = "fixed-5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + regulator-always-on; + }; +}; + +&bch { + status = "disabled"; +}; + +&btif { + status = "okay"; +}; + +&cir { + pinctrl-names = "default"; + pinctrl-0 = <&irrx_pins>; + status = "okay"; +}; + +ð { + pinctrl-names = "default"; + pinctrl-0 = <ð_pins>; + status = "okay"; + + gmac1: mac@1 { + compatible = "mediatek,eth-mac"; + reg = <1>; + phy-handle = <&phy5>; + }; + + mdio-bus { + #address-cells = <1>; + #size-cells = <0>; + + phy5: ethernet-phy@5 { + reg = <5>; + phy-mode = "sgmii"; + }; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&emmc_pins_default>; + pinctrl-1 = <&emmc_pins_uhs>; + status = "okay"; + bus-width = <8>; + max-frequency = <50000000>; + cap-mmc-highspeed; + mmc-hs200-1_8v; + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_1p8v>; + assigned-clocks = <&topckgen CLK_TOP_MSDC30_0_SEL>; + assigned-clock-parents = <&topckgen CLK_TOP_UNIV48M>; + non-removable; +}; + +&mmc1 { + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&sd0_pins_default>; + pinctrl-1 = <&sd0_pins_uhs>; + status = "okay"; + bus-width = <4>; + max-frequency = <50000000>; + cap-sd-highspeed; + r_smpl = <1>; + cd-gpios = <&pio 81 GPIO_ACTIVE_LOW>; + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_3p3v>; + assigned-clocks = <&topckgen CLK_TOP_MSDC30_1_SEL>; + assigned-clock-parents = <&topckgen CLK_TOP_UNIV48M>; +}; + +&nandc { + pinctrl-names = "default"; + pinctrl-0 = <¶llel_nand_pins>; + status = "disabled"; +}; + +&nor_flash { + pinctrl-names = "default"; + pinctrl-0 = <&spi_nor_pins>; + status = "disabled"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + }; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pcie0_pins>, <&pcie1_pins>; + status = "okay"; + + pcie@0,0 { + status = "okay"; + }; + + pcie@1,0 { + status = "okay"; + }; +}; + +&pio { + /* Attention: GPIO 90 is used to switch between PCIe@1,0 and + * SATA functions. i.e. output-high: PCIe, output-low: SATA + */ + asm_sel { + gpio-hog; + gpios = <90 GPIO_ACTIVE_HIGH>; + output-high; + }; + + /* eMMC is shared pin with parallel NAND */ + emmc_pins_default: emmc-pins-default { + mux { + function = "emmc", "emmc_rst"; + groups = "emmc"; + }; + + /* "NDL0","NDL1","NDL2","NDL3","NDL4","NDL5","NDL6","NDL7", + * "NRB","NCLE" pins are used as DAT0,DAT1,DAT2,DAT3,DAT4, + * DAT5,DAT6,DAT7,CMD,CLK for eMMC respectively + */ + conf-cmd-dat { + pins = "NDL0", "NDL1", "NDL2", + "NDL3", "NDL4", "NDL5", + "NDL6", "NDL7", "NRB"; + input-enable; + bias-pull-up; + }; + + conf-clk { + pins = "NCLE"; + bias-pull-down; + }; + }; + + emmc_pins_uhs: emmc-pins-uhs { + mux { + function = "emmc"; + groups = "emmc"; + }; + + conf-cmd-dat { + pins = "NDL0", "NDL1", "NDL2", + "NDL3", "NDL4", "NDL5", + "NDL6", "NDL7", "NRB"; + input-enable; + drive-strength = <4>; + bias-pull-up; + }; + + conf-clk { + pins = "NCLE"; + drive-strength = <4>; + bias-pull-down; + }; + }; + + eth_pins: eth-pins { + mux { + function = "eth"; + groups = "mdc_mdio", "rgmii_via_gmac2"; + }; + }; + + i2c1_pins: i2c1-pins { + mux { + function = "i2c"; + groups = "i2c1_0"; + }; + }; + + i2c2_pins: i2c2-pins { + mux { + function = "i2c"; + groups = "i2c2_0"; + }; + }; + + i2s1_pins: i2s1-pins { + mux { + function = "i2s"; + groups = "i2s_out_mclk_bclk_ws", + "i2s1_in_data", + "i2s1_out_data"; + }; + + conf { + pins = "I2S1_IN", "I2S1_OUT", "I2S_BCLK", + "I2S_WS", "I2S_MCLK"; + drive-strength = <12>; + bias-pull-down; + }; + }; + + irrx_pins: irrx-pins { + mux { + function = "ir"; + groups = "ir_1_rx"; + }; + }; + + irtx_pins: irtx-pins { + mux { + function = "ir"; + groups = "ir_1_tx"; + }; + }; + + /* Parallel nand is shared pin with eMMC */ + parallel_nand_pins: parallel-nand-pins { + mux { + function = "flash"; + groups = "par_nand"; + }; + }; + + pcie0_pins: pcie0-pins { + mux { + function = "pcie"; + groups = "pcie0_pad_perst", + "pcie0_1_waken", + "pcie0_1_clkreq"; + }; + }; + + pcie1_pins: pcie1-pins { + mux { + function = "pcie"; + groups = "pcie1_pad_perst", + "pcie1_0_waken", + "pcie1_0_clkreq"; + }; + }; + + pmic_bus_pins: pmic-bus-pins { + mux { + function = "pmic"; + groups = "pmic_bus"; + }; + }; + + pwm7_pins: pwm1-2-pins { + mux { + function = "pwm"; + groups = "pwm_ch7_2"; + }; + }; + + wled_pins: wled-pins { + mux { + function = "led"; + groups = "wled"; + }; + }; + + sd0_pins_default: sd0-pins-default { + mux { + function = "sd"; + groups = "sd_0"; + }; + + /* "I2S2_OUT, "I2S4_IN"", "I2S3_IN", "I2S2_IN", + * "I2S4_OUT", "I2S3_OUT" are used as DAT0, DAT1, + * DAT2, DAT3, CMD, CLK for SD respectively. + */ + conf-cmd-data { + pins = "I2S2_OUT", "I2S4_IN", "I2S3_IN", + "I2S2_IN","I2S4_OUT"; + input-enable; + drive-strength = <8>; + bias-pull-up; + }; + conf-clk { + pins = "I2S3_OUT"; + drive-strength = <12>; + bias-pull-down; + }; + conf-cd { + pins = "TXD3"; + bias-pull-up; + }; + }; + + sd0_pins_uhs: sd0-pins-uhs { + mux { + function = "sd"; + groups = "sd_0"; + }; + + conf-cmd-data { + pins = "I2S2_OUT", "I2S4_IN", "I2S3_IN", + "I2S2_IN","I2S4_OUT"; + input-enable; + bias-pull-up; + }; + + conf-clk { + pins = "I2S3_OUT"; + bias-pull-down; + }; + }; + + /* Serial NAND is shared pin with SPI-NOR */ + serial_nand_pins: serial-nand-pins { + mux { + function = "flash"; + groups = "snfi"; + }; + }; + + spic0_pins: spic0-pins { + mux { + function = "spi"; + groups = "spic0_0"; + }; + }; + + spic1_pins: spic1-pins { + mux { + function = "spi"; + groups = "spic1_0"; + }; + }; + + /* SPI-NOR is shared pin with serial NAND */ + spi_nor_pins: spi-nor-pins { + mux { + function = "flash"; + groups = "spi_nor"; + }; + }; + + /* serial NAND is shared pin with SPI-NOR */ + serial_nand_pins: serial-nand-pins { + mux { + function = "flash"; + groups = "snfi"; + }; + }; + + uart0_pins: uart0-pins { + mux { + function = "uart"; + groups = "uart0_0_tx_rx" ; + }; + }; + + uart2_pins: uart2-pins { + mux { + function = "uart"; + groups = "uart2_1_tx_rx" ; + }; + }; + + watchdog_pins: watchdog-pins { + mux { + function = "watchdog"; + groups = "watchdog"; + }; + }; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm7_pins>; + status = "okay"; +}; + +&pwrap { + pinctrl-names = "default"; + pinctrl-0 = <&pmic_bus_pins>; + + status = "okay"; +}; + +&sata { + status = "disable"; +}; + +&sata_phy { + status = "disable"; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spic0_pins>; + status = "okay"; +}; + +&spi1 { + pinctrl-names = "default"; + pinctrl-0 = <&spic1_pins>; + status = "okay"; +}; + +&ssusb { + vusb33-supply = <®_3p3v>; + vbus-supply = <®_5v>; + status = "okay"; +}; + +&u3phy { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; + status = "okay"; +}; + +&watchdog { + pinctrl-names = "default"; + pinctrl-0 = <&watchdog_pins>; + status = "okay"; +}; diff --git a/dts/src/arm64/mediatek/mt7622-rfb1.dts b/dts/src/arm64/mediatek/mt7622-rfb1.dts index a747b7bf13..dcad0869b8 100644 --- a/dts/src/arm64/mediatek/mt7622-rfb1.dts +++ b/dts/src/arm64/mediatek/mt7622-rfb1.dts @@ -51,7 +51,7 @@ }; memory { - reg = <0 0x40000000 0 0x3F000000>; + reg = <0 0x40000000 0 0x20000000>; }; reg_1p8v: regulator-1p8v { @@ -81,6 +81,103 @@ }; }; +&bch { + status = "disabled"; +}; + +&btif { + status = "okay"; +}; + +&cir { + pinctrl-names = "default"; + pinctrl-0 = <&irrx_pins>; + status = "okay"; +}; + +ð { + pinctrl-names = "default"; + pinctrl-0 = <ð_pins>; + status = "okay"; + + gmac1: mac@1 { + compatible = "mediatek,eth-mac"; + reg = <1>; + phy-handle = <&phy5>; + }; + + mdio-bus { + #address-cells = <1>; + #size-cells = <0>; + + phy5: ethernet-phy@5 { + reg = <5>; + phy-mode = "sgmii"; + }; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&emmc_pins_default>; + pinctrl-1 = <&emmc_pins_uhs>; + status = "okay"; + bus-width = <8>; + max-frequency = <50000000>; + cap-mmc-highspeed; + mmc-hs200-1_8v; + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_1p8v>; + assigned-clocks = <&topckgen CLK_TOP_MSDC30_0_SEL>; + assigned-clock-parents = <&topckgen CLK_TOP_UNIV48M>; + non-removable; +}; + +&mmc1 { + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&sd0_pins_default>; + pinctrl-1 = <&sd0_pins_uhs>; + status = "okay"; + bus-width = <4>; + max-frequency = <50000000>; + cap-sd-highspeed; + r_smpl = <1>; + cd-gpios = <&pio 81 GPIO_ACTIVE_LOW>; + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_3p3v>; + assigned-clocks = <&topckgen CLK_TOP_MSDC30_1_SEL>; + assigned-clock-parents = <&topckgen CLK_TOP_UNIV48M>; +}; + +&nandc { + pinctrl-names = "default"; + pinctrl-0 = <¶llel_nand_pins>; + status = "disabled"; +}; + +&nor_flash { + pinctrl-names = "default"; + pinctrl-0 = <&spi_nor_pins>; + status = "disabled"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + }; +}; + &pcie { pinctrl-names = "default"; pinctrl-0 = <&pcie0_pins>; @@ -344,103 +441,6 @@ }; }; -&bch { - status = "disabled"; -}; - -&btif { - status = "okay"; -}; - -&cir { - pinctrl-names = "default"; - pinctrl-0 = <&irrx_pins>; - status = "okay"; -}; - -ð { - pinctrl-names = "default"; - pinctrl-0 = <ð_pins>; - status = "okay"; - - gmac1: mac@1 { - compatible = "mediatek,eth-mac"; - reg = <1>; - phy-handle = <&phy5>; - }; - - mdio-bus { - #address-cells = <1>; - #size-cells = <0>; - - phy5: ethernet-phy@5 { - reg = <5>; - phy-mode = "sgmii"; - }; - }; -}; - -&i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins>; - status = "okay"; -}; - -&i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins>; - status = "okay"; -}; - -&mmc0 { - pinctrl-names = "default", "state_uhs"; - pinctrl-0 = <&emmc_pins_default>; - pinctrl-1 = <&emmc_pins_uhs>; - status = "okay"; - bus-width = <8>; - max-frequency = <50000000>; - cap-mmc-highspeed; - mmc-hs200-1_8v; - vmmc-supply = <®_3p3v>; - vqmmc-supply = <®_1p8v>; - assigned-clocks = <&topckgen CLK_TOP_MSDC30_0_SEL>; - assigned-clock-parents = <&topckgen CLK_TOP_UNIV48M>; - non-removable; -}; - -&mmc1 { - pinctrl-names = "default", "state_uhs"; - pinctrl-0 = <&sd0_pins_default>; - pinctrl-1 = <&sd0_pins_uhs>; - status = "okay"; - bus-width = <4>; - max-frequency = <50000000>; - cap-sd-highspeed; - r_smpl = <1>; - cd-gpios = <&pio 81 GPIO_ACTIVE_LOW>; - vmmc-supply = <®_3p3v>; - vqmmc-supply = <®_3p3v>; - assigned-clocks = <&topckgen CLK_TOP_MSDC30_1_SEL>; - assigned-clock-parents = <&topckgen CLK_TOP_UNIV48M>; -}; - -&nandc { - pinctrl-names = "default"; - pinctrl-0 = <¶llel_nand_pins>; - status = "disabled"; -}; - -&nor_flash { - pinctrl-names = "default"; - pinctrl-0 = <&spi_nor_pins>; - status = "disabled"; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - }; -}; - &pwm { pinctrl-names = "default"; pinctrl-0 = <&pwm7_pins>; diff --git a/dts/src/arm64/mediatek/mt7622.dtsi b/dts/src/arm64/mediatek/mt7622.dtsi index de2c47bdbe..fe0c875f1d 100644 --- a/dts/src/arm64/mediatek/mt7622.dtsi +++ b/dts/src/arm64/mediatek/mt7622.dtsi @@ -79,6 +79,7 @@ #cooling-cells = <2>; enable-method = "psci"; clock-frequency = <1300000000>; + cci-control-port = <&cci_control2>; }; cpu1: cpu@1 { @@ -92,6 +93,7 @@ #cooling-cells = <2>; enable-method = "psci"; clock-frequency = <1300000000>; + cci-control-port = <&cci_control2>; }; }; @@ -113,6 +115,13 @@ method = "smc"; }; + pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 9 IRQ_TYPE_LEVEL_LOW>; + interrupt-affinity = <&cpu0>, <&cpu1>; + }; + reserved-memory { #address-cells = <2>; #size-cells = <2>; @@ -218,6 +227,16 @@ #reset-cells = <1>; }; + timer: timer@10004000 { + compatible = "mediatek,mt7622-timer", + "mediatek,mt6577-timer"; + reg = <0 0x10004000 0 0x80>; + interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_LOW>; + clocks = <&infracfg CLK_INFRA_APXGPT_PD>, + <&topckgen CLK_TOP_RTC>; + clock-names = "system-clk", "rtc-clk"; + }; + scpsys: scpsys@10006000 { compatible = "mediatek,mt7622-scpsys", "syscon"; @@ -325,6 +344,42 @@ <0 0x10360000 0 0x2000>; }; + cci: cci@10390000 { + compatible = "arm,cci-400"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0 0x10390000 0 0x1000>; + ranges = <0 0 0x10390000 0x10000>; + + cci_control0: slave-if@1000 { + compatible = "arm,cci-400-ctrl-if"; + interface-type = "ace-lite"; + reg = <0x1000 0x1000>; + }; + + cci_control1: slave-if@4000 { + compatible = "arm,cci-400-ctrl-if"; + interface-type = "ace"; + reg = <0x4000 0x1000>; + }; + + cci_control2: slave-if@5000 { + compatible = "arm,cci-400-ctrl-if"; + interface-type = "ace"; + reg = <0x5000 0x1000>; + }; + + pmu@9000 { + compatible = "arm,cci-400-pmu,r1"; + reg = <0x9000 0x5000>; + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + auxadc: adc@11001000 { compatible = "mediatek,mt7622-auxadc"; reg = <0 0x11001000 0 0x1000>; @@ -475,6 +530,13 @@ reg-shift = <2>; reg-io-width = <4>; status = "disabled"; + + bluetooth { + compatible = "mediatek,mt7622-bluetooth"; + power-domains = <&scpsys MT7622_POWER_DOMAIN_WB>; + clocks = <&clk25m>; + clock-names = "ref"; + }; }; nandc: nfi@1100d000 { diff --git a/dts/src/arm64/nvidia/tegra186.dtsi b/dts/src/arm64/nvidia/tegra186.dtsi index b762227f6a..2f3c8e2952 100644 --- a/dts/src/arm64/nvidia/tegra186.dtsi +++ b/dts/src/arm64/nvidia/tegra186.dtsi @@ -4,6 +4,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/mailbox/tegra186-hsp.h> #include <dt-bindings/memory/tegra186-mc.h> +#include <dt-bindings/pinctrl/pinctrl-tegra-io-pad.h> #include <dt-bindings/power/tegra186-powergate.h> #include <dt-bindings/reset/tegra186-reset.h> #include <dt-bindings/thermal/tegra186-bpmp-thermal.h> @@ -236,6 +237,20 @@ clock-names = "sdhci"; resets = <&bpmp TEGRA186_RESET_SDMMC1>; reset-names = "sdhci"; + pinctrl-names = "sdmmc-3v3", "sdmmc-1v8"; + pinctrl-0 = <&sdmmc1_3v3>; + pinctrl-1 = <&sdmmc1_1v8>; + nvidia,pad-autocal-pull-up-offset-3v3-timeout = <0x07>; + nvidia,pad-autocal-pull-down-offset-3v3-timeout = <0x06>; + nvidia,pad-autocal-pull-up-offset-1v8-timeout = <0x07>; + nvidia,pad-autocal-pull-down-offset-1v8-timeout = <0x07>; + nvidia,pad-autocal-pull-up-offset-sdr104 = <0x03>; + nvidia,pad-autocal-pull-down-offset-sdr104 = <0x05>; + nvidia,default-tap = <0x5>; + nvidia,default-trim = <0xb>; + assigned-clocks = <&bpmp TEGRA186_CLK_SDMMC1>, + <&bpmp TEGRA186_CLK_PLLP_OUT0>; + assigned-clock-parents = <&bpmp TEGRA186_CLK_PLLP_OUT0>; status = "disabled"; }; @@ -247,6 +262,15 @@ clock-names = "sdhci"; resets = <&bpmp TEGRA186_RESET_SDMMC2>; reset-names = "sdhci"; + pinctrl-names = "sdmmc-3v3", "sdmmc-1v8"; + pinctrl-0 = <&sdmmc2_3v3>; + pinctrl-1 = <&sdmmc2_1v8>; + nvidia,pad-autocal-pull-up-offset-3v3-timeout = <0x07>; + nvidia,pad-autocal-pull-down-offset-3v3-timeout = <0x06>; + nvidia,pad-autocal-pull-up-offset-1v8-timeout = <0x07>; + nvidia,pad-autocal-pull-down-offset-1v8-timeout = <0x07>; + nvidia,default-tap = <0x5>; + nvidia,default-trim = <0xb>; status = "disabled"; }; @@ -258,6 +282,17 @@ clock-names = "sdhci"; resets = <&bpmp TEGRA186_RESET_SDMMC3>; reset-names = "sdhci"; + pinctrl-names = "sdmmc-3v3", "sdmmc-1v8"; + pinctrl-0 = <&sdmmc3_3v3>; + pinctrl-1 = <&sdmmc3_1v8>; + nvidia,pad-autocal-pull-up-offset-1v8 = <0x00>; + nvidia,pad-autocal-pull-down-offset-1v8 = <0x7a>; + nvidia,pad-autocal-pull-up-offset-3v3-timeout = <0x07>; + nvidia,pad-autocal-pull-down-offset-3v3-timeout = <0x06>; + nvidia,pad-autocal-pull-up-offset-1v8-timeout = <0x07>; + nvidia,pad-autocal-pull-down-offset-1v8-timeout = <0x07>; + nvidia,default-tap = <0x5>; + nvidia,default-trim = <0xb>; status = "disabled"; }; @@ -267,8 +302,19 @@ interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; clocks = <&bpmp TEGRA186_CLK_SDMMC4>; clock-names = "sdhci"; + assigned-clocks = <&bpmp TEGRA186_CLK_SDMMC4>, + <&bpmp TEGRA186_CLK_PLLC4_VCO>; + assigned-clock-parents = <&bpmp TEGRA186_CLK_PLLC4_VCO>; resets = <&bpmp TEGRA186_RESET_SDMMC4>; reset-names = "sdhci"; + nvidia,pad-autocal-pull-up-offset-hs400 = <0x05>; + nvidia,pad-autocal-pull-down-offset-hs400 = <0x05>; + nvidia,pad-autocal-pull-up-offset-1v8-timeout = <0x0a>; + nvidia,pad-autocal-pull-down-offset-1v8-timeout = <0x0a>; + nvidia,default-tap = <0x5>; + nvidia,default-trim = <0x9>; + nvidia,dqs-trim = <63>; + mmc-hs400-1_8v; status = "disabled"; }; @@ -368,6 +414,36 @@ <0 0x0c380000 0 0x10000>, <0 0x0c390000 0 0x10000>; reg-names = "pmc", "wake", "aotag", "scratch"; + + sdmmc1_3v3: sdmmc1-3v3 { + pins = "sdmmc1-hv"; + power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>; + }; + + sdmmc1_1v8: sdmmc1-1v8 { + pins = "sdmmc1-hv"; + power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>; + }; + + sdmmc2_3v3: sdmmc2-3v3 { + pins = "sdmmc2-hv"; + power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>; + }; + + sdmmc2_1v8: sdmmc2-1v8 { + pins = "sdmmc2-hv"; + power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>; + }; + + sdmmc3_3v3: sdmmc3-3v3 { + pins = "sdmmc3-hv"; + power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>; + }; + + sdmmc3_1v8: sdmmc3-1v8 { + pins = "sdmmc3-hv"; + power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>; + }; }; ccplex@e000000 { diff --git a/dts/src/arm64/nvidia/tegra194.dtsi b/dts/src/arm64/nvidia/tegra194.dtsi index a4dfcd19b9..9fc14bb9a0 100644 --- a/dts/src/arm64/nvidia/tegra194.dtsi +++ b/dts/src/arm64/nvidia/tegra194.dtsi @@ -118,7 +118,7 @@ }; gen1_i2c: i2c@3160000 { - compatible = "nvidia,tegra194-i2c", "nvidia,tegra114-i2c"; + compatible = "nvidia,tegra194-i2c"; reg = <0x03160000 0x10000>; interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -143,7 +143,7 @@ }; cam_i2c: i2c@3180000 { - compatible = "nvidia,tegra194-i2c", "nvidia,tegra114-i2c"; + compatible = "nvidia,tegra194-i2c"; reg = <0x03180000 0x10000>; interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -157,7 +157,7 @@ /* shares pads with dpaux1 */ dp_aux_ch1_i2c: i2c@3190000 { - compatible = "nvidia,tegra194-i2c", "nvidia,tegra114-i2c"; + compatible = "nvidia,tegra194-i2c"; reg = <0x03190000 0x10000>; interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -171,7 +171,7 @@ /* shares pads with dpaux0 */ dp_aux_ch0_i2c: i2c@31b0000 { - compatible = "nvidia,tegra194-i2c", "nvidia,tegra114-i2c"; + compatible = "nvidia,tegra194-i2c"; reg = <0x031b0000 0x10000>; interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -184,7 +184,7 @@ }; gen7_i2c: i2c@31c0000 { - compatible = "nvidia,tegra194-i2c", "nvidia,tegra114-i2c"; + compatible = "nvidia,tegra194-i2c"; reg = <0x031c0000 0x10000>; interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -197,7 +197,7 @@ }; gen9_i2c: i2c@31e0000 { - compatible = "nvidia,tegra194-i2c", "nvidia,tegra114-i2c"; + compatible = "nvidia,tegra194-i2c"; reg = <0x031e0000 0x10000>; interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -264,7 +264,7 @@ }; gen2_i2c: i2c@c240000 { - compatible = "nvidia,tegra194-i2c", "nvidia,tegra114-i2c"; + compatible = "nvidia,tegra194-i2c"; reg = <0x0c240000 0x10000>; interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -277,7 +277,7 @@ }; gen8_i2c: i2c@c250000 { - compatible = "nvidia,tegra194-i2c", "nvidia,tegra114-i2c"; + compatible = "nvidia,tegra194-i2c"; reg = <0x0c250000 0x10000>; interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; diff --git a/dts/src/arm64/nvidia/tegra210-p2180.dtsi b/dts/src/arm64/nvidia/tegra210-p2180.dtsi index 212e6634c9..053458a5db 100644 --- a/dts/src/arm64/nvidia/tegra210-p2180.dtsi +++ b/dts/src/arm64/nvidia/tegra210-p2180.dtsi @@ -178,16 +178,7 @@ vddio_sdmmc: ldo2 { regulator-name = "VDDIO_SDMMC"; - /* - * Technically this supply should have - * a supported range from 1.8 - 3.3 V. - * However, that would cause the SDHCI - * driver to request 2.7 V upon access - * and that in turn will cause traffic - * to be broken. Leave it at 3.3 V for - * now. - */ - regulator-min-microvolt = <3300000>; + regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-always-on; regulator-boot-on; @@ -282,6 +273,7 @@ status = "okay"; bus-width = <8>; non-removable; + vqmmc-supply = <&vdd_1v8>; }; clocks { diff --git a/dts/src/arm64/nvidia/tegra210-p2597.dtsi b/dts/src/arm64/nvidia/tegra210-p2597.dtsi index 9d5a0e6b2c..365726ddd4 100644 --- a/dts/src/arm64/nvidia/tegra210-p2597.dtsi +++ b/dts/src/arm64/nvidia/tegra210-p2597.dtsi @@ -1452,7 +1452,6 @@ sdhci@700b0000 { status = "okay"; bus-width = <4>; - no-1-8-v; cd-gpios = <&gpio TEGRA_GPIO(Z, 1) GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm64/nvidia/tegra210.dtsi b/dts/src/arm64/nvidia/tegra210.dtsi index 3be920efee..8fe47d6445 100644 --- a/dts/src/arm64/nvidia/tegra210.dtsi +++ b/dts/src/arm64/nvidia/tegra210.dtsi @@ -3,6 +3,7 @@ #include <dt-bindings/gpio/tegra-gpio.h> #include <dt-bindings/memory/tegra210-mc.h> #include <dt-bindings/pinctrl/pinctrl-tegra.h> +#include <dt-bindings/pinctrl/pinctrl-tegra-io-pad.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/thermal/tegra124-soctherm.h> @@ -776,6 +777,26 @@ #power-domain-cells = <0>; }; }; + + sdmmc1_3v3: sdmmc1-3v3 { + pins = "sdmmc1"; + power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>; + }; + + sdmmc1_1v8: sdmmc1-1v8 { + pins = "sdmmc1"; + power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>; + }; + + sdmmc3_3v3: sdmmc3-3v3 { + pins = "sdmmc3"; + power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>; + }; + + sdmmc3_1v8: sdmmc3-1v8 { + pins = "sdmmc3"; + power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>; + }; }; fuse@7000f800 { @@ -1027,6 +1048,20 @@ clock-names = "sdhci"; resets = <&tegra_car 14>; reset-names = "sdhci"; + pinctrl-names = "sdmmc-3v3", "sdmmc-1v8"; + pinctrl-0 = <&sdmmc1_3v3>; + pinctrl-1 = <&sdmmc1_1v8>; + nvidia,pad-autocal-pull-up-offset-3v3 = <0x00>; + nvidia,pad-autocal-pull-down-offset-3v3 = <0x7d>; + nvidia,pad-autocal-pull-up-offset-1v8 = <0x7b>; + nvidia,pad-autocal-pull-down-offset-1v8 = <0x7b>; + nvidia,default-tap = <0x2>; + nvidia,default-trim = <0x4>; + assigned-clocks = <&tegra_car TEGRA210_CLK_SDMMC4>, + <&tegra_car TEGRA210_CLK_PLL_C4_OUT0>, + <&tegra_car TEGRA210_CLK_PLL_C4>; + assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_C4_OUT0>; + assigned-clock-rates = <200000000>, <1000000000>, <1000000000>; status = "disabled"; }; @@ -1038,6 +1073,10 @@ clock-names = "sdhci"; resets = <&tegra_car 9>; reset-names = "sdhci"; + nvidia,pad-autocal-pull-up-offset-1v8 = <0x05>; + nvidia,pad-autocal-pull-down-offset-1v8 = <0x05>; + nvidia,default-tap = <0x8>; + nvidia,default-trim = <0x0>; status = "disabled"; }; @@ -1049,6 +1088,15 @@ clock-names = "sdhci"; resets = <&tegra_car 69>; reset-names = "sdhci"; + pinctrl-names = "sdmmc-3v3", "sdmmc-1v8"; + pinctrl-0 = <&sdmmc3_3v3>; + pinctrl-1 = <&sdmmc3_1v8>; + nvidia,pad-autocal-pull-up-offset-3v3 = <0x00>; + nvidia,pad-autocal-pull-down-offset-3v3 = <0x7d>; + nvidia,pad-autocal-pull-up-offset-1v8 = <0x7b>; + nvidia,pad-autocal-pull-down-offset-1v8 = <0x7b>; + nvidia,default-tap = <0x3>; + nvidia,default-trim = <0x3>; status = "disabled"; }; @@ -1060,6 +1108,15 @@ clock-names = "sdhci"; resets = <&tegra_car 15>; reset-names = "sdhci"; + nvidia,pad-autocal-pull-up-offset-1v8 = <0x05>; + nvidia,pad-autocal-pull-down-offset-1v8 = <0x05>; + nvidia,default-tap = <0x8>; + nvidia,default-trim = <0x0>; + assigned-clocks = <&tegra_car TEGRA210_CLK_SDMMC4>, + <&tegra_car TEGRA210_CLK_PLL_C4_OUT0>; + assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_C4_OUT0>; + nvidia,dqs-trim = <40>; + mmc-hs400-1_8v; status = "disabled"; }; diff --git a/dts/src/arm64/qcom/apq8016-sbc.dtsi b/dts/src/arm64/qcom/apq8016-sbc.dtsi index 78ce3979ef..46feedf7c9 100644 --- a/dts/src/arm64/qcom/apq8016-sbc.dtsi +++ b/dts/src/arm64/qcom/apq8016-sbc.dtsi @@ -545,6 +545,20 @@ }; }; +&spmi_bus { + pm8916_0: pm8916@0 { + pon@800 { + resin { + compatible = "qcom,pm8941-resin"; + interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = <KEY_VOLUMEDOWN>; + }; + }; + }; +}; + &wcd_codec { status = "okay"; clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>; diff --git a/dts/src/arm64/qcom/apq8096-db820c.dts b/dts/src/arm64/qcom/apq8096-db820c.dts index 230e9c8484..da23bdafbd 100644 --- a/dts/src/arm64/qcom/apq8096-db820c.dts +++ b/dts/src/arm64/qcom/apq8096-db820c.dts @@ -17,5 +17,5 @@ / { model = "Qualcomm Technologies, Inc. DB820c"; - compatible = "arrow,apq8096-db820c", "qcom,apq8096-sbc"; + compatible = "arrow,apq8096-db820c", "qcom,apq8096-sbc", "qcom,apq8096"; }; diff --git a/dts/src/arm64/qcom/apq8096-db820c.dtsi b/dts/src/arm64/qcom/apq8096-db820c.dtsi index 0ef90c6554..bf20c55a6b 100644 --- a/dts/src/arm64/qcom/apq8096-db820c.dtsi +++ b/dts/src/arm64/qcom/apq8096-db820c.dtsi @@ -623,3 +623,17 @@ }; }; }; + +&spmi_bus { + pmic@0 { + pon@800 { + resin { + compatible = "qcom,pm8941-resin"; + interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = <KEY_VOLUMEDOWN>; + }; + }; + }; +}; diff --git a/dts/src/arm64/qcom/msm8916.dtsi b/dts/src/arm64/qcom/msm8916.dtsi index 7b32b8990d..d302d8d639 100644 --- a/dts/src/arm64/qcom/msm8916.dtsi +++ b/dts/src/arm64/qcom/msm8916.dtsi @@ -18,9 +18,6 @@ #include <dt-bindings/thermal/thermal.h> / { - model = "Qualcomm Technologies, Inc. MSM8916"; - compatible = "qcom,msm8916"; - interrupt-parent = <&intc>; #address-cells = <2>; @@ -1099,10 +1096,11 @@ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; - port { - tpiu_in: endpoint { - slave-mode; - remote-endpoint = <&replicator_out1>; + in-ports { + port { + tpiu_in: endpoint { + remote-endpoint = <&replicator_out1>; + }; }; }; }; @@ -1114,7 +1112,7 @@ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; - ports { + in-ports { #address-cells = <1>; #size-cells = <0>; @@ -1132,12 +1130,13 @@ port@4 { reg = <4>; funnel0_in4: endpoint { - slave-mode; remote-endpoint = <&funnel1_out>; }; }; - port@8 { - reg = <0>; + }; + + out-ports { + port { funnel0_out: endpoint { remote-endpoint = <&etf_in>; }; @@ -1152,7 +1151,7 @@ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; - ports { + out-ports { #address-cells = <1>; #size-cells = <0>; @@ -1168,10 +1167,11 @@ remote-endpoint = <&tpiu_in>; }; }; - port@2 { - reg = <0>; + }; + + in-ports { + port { replicator_in: endpoint { - slave-mode; remote-endpoint = <&etf_out>; }; }; @@ -1185,19 +1185,16 @@ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; + in-ports { + port { etf_in: endpoint { - slave-mode; remote-endpoint = <&funnel0_out>; }; }; - port@1 { - reg = <0>; + }; + + out-ports { + port { etf_out: endpoint { remote-endpoint = <&replicator_in>; }; @@ -1212,10 +1209,11 @@ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; - port { - etr_in: endpoint { - slave-mode; - remote-endpoint = <&replicator_out0>; + in-ports { + port { + etr_in: endpoint { + remote-endpoint = <&replicator_out0>; + }; }; }; }; @@ -1227,40 +1225,38 @@ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; - ports { + in-ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; funnel1_in0: endpoint { - slave-mode; remote-endpoint = <&etm0_out>; }; }; port@1 { reg = <1>; funnel1_in1: endpoint { - slave-mode; remote-endpoint = <&etm1_out>; }; }; port@2 { reg = <2>; funnel1_in2: endpoint { - slave-mode; remote-endpoint = <&etm2_out>; }; }; port@3 { reg = <3>; funnel1_in3: endpoint { - slave-mode; remote-endpoint = <&etm3_out>; }; }; - port@4 { - reg = <0>; + }; + + out-ports { + port { funnel1_out: endpoint { remote-endpoint = <&funnel0_in4>; }; @@ -1309,9 +1305,11 @@ cpu = <&CPU0>; - port { - etm0_out: endpoint { - remote-endpoint = <&funnel1_in0>; + out-ports { + port { + etm0_out: endpoint { + remote-endpoint = <&funnel1_in0>; + }; }; }; }; @@ -1325,9 +1323,11 @@ cpu = <&CPU1>; - port { - etm1_out: endpoint { - remote-endpoint = <&funnel1_in1>; + out-ports { + port { + etm1_out: endpoint { + remote-endpoint = <&funnel1_in1>; + }; }; }; }; @@ -1341,9 +1341,11 @@ cpu = <&CPU2>; - port { - etm2_out: endpoint { - remote-endpoint = <&funnel1_in2>; + out-ports { + port { + etm2_out: endpoint { + remote-endpoint = <&funnel1_in2>; + }; }; }; }; @@ -1357,9 +1359,11 @@ cpu = <&CPU3>; - port { - etm3_out: endpoint { - remote-endpoint = <&funnel1_in3>; + out-ports { + port { + etm3_out: endpoint { + remote-endpoint = <&funnel1_in3>; + }; }; }; }; diff --git a/dts/src/arm64/qcom/msm8996.dtsi b/dts/src/arm64/qcom/msm8996.dtsi index cd3865e7a2..b29fe80d72 100644 --- a/dts/src/arm64/qcom/msm8996.dtsi +++ b/dts/src/arm64/qcom/msm8996.dtsi @@ -16,8 +16,6 @@ #include <dt-bindings/clock/qcom,rpmcc.h> / { - model = "Qualcomm Technologies, Inc. MSM8996"; - interrupt-parent = <&intc>; #address-cells = <2>; @@ -409,11 +407,6 @@ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; }; - apcs: syscon@9820000 { - compatible = "syscon"; - reg = <0x9820000 0x1000>; - }; - apcs_glb: mailbox@9820000 { compatible = "qcom,msm8996-apcs-hmss-global"; reg = <0x9820000 0x1000>; @@ -1140,7 +1133,7 @@ interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>; label = "lpass"; - qcom,ipc = <&apcs 16 8>; + mboxes = <&apcs_glb 8>; qcom,smd-edge = <1>; qcom,remote-pid = <2>; }; @@ -1152,7 +1145,7 @@ interrupts = <0 158 IRQ_TYPE_EDGE_RISING>; - qcom,ipc = <&apcs 16 10>; + mboxes = <&apcs_glb 10>; qcom,local-pid = <0>; qcom,remote-pid = <2>; @@ -1176,7 +1169,7 @@ interrupts = <GIC_SPI 451 IRQ_TYPE_EDGE_RISING>; - qcom,ipc = <&apcs 16 14>; + mboxes = <&apcs_glb 14>; qcom,local-pid = <0>; qcom,remote-pid = <1>; @@ -1200,7 +1193,7 @@ interrupts = <GIC_SPI 178 IRQ_TYPE_EDGE_RISING>; - qcom,ipc = <&apcs 16 26>; + mboxes = <&apcs_glb 26>; qcom,local-pid = <0>; qcom,remote-pid = <3>; diff --git a/dts/src/arm64/qcom/msm8998-mtp.dts b/dts/src/arm64/qcom/msm8998-mtp.dts new file mode 100644 index 0000000000..66540d2ca1 --- /dev/null +++ b/dts/src/arm64/qcom/msm8998-mtp.dts @@ -0,0 +1,13 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright (c) 2016, The Linux Foundation. All rights reserved. */ + +/dts-v1/; + +#include "msm8998-mtp.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. MSM8998 v1 MTP"; + compatible = "qcom,msm8998-mtp"; + + qcom,board-id = <8 0>; +}; diff --git a/dts/src/arm64/qcom/msm8998-mtp.dtsi b/dts/src/arm64/qcom/msm8998-mtp.dtsi new file mode 100644 index 0000000000..b4276da1fb --- /dev/null +++ b/dts/src/arm64/qcom/msm8998-mtp.dtsi @@ -0,0 +1,243 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright (c) 2016, The Linux Foundation. All rights reserved. */ + +#include "msm8998.dtsi" +#include "pm8998.dtsi" +#include "pmi8998.dtsi" +#include "pm8005.dtsi" + +/ { + aliases { + serial0 = &blsp2_uart1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + thermal-zones { + battery-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 0>; + + trips { + battery_crit: trip0 { + temperature = <60000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + skin-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 5>; + + trips { + skin_alert: trip0 { + temperature = <44000>; + hysteresis = <2000>; + type = "passive"; + }; + + skip_crit: trip1 { + temperature = <70000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-always-on; + regulator-boot-on; + }; +}; + +&blsp2_uart1 { + status = "okay"; +}; + +&rpm_requests { + pm8998-regulators { + compatible = "qcom,rpm-pm8998-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_s4-supply = <&vph_pwr>; + vdd_s5-supply = <&vph_pwr>; + vdd_s6-supply = <&vph_pwr>; + vdd_s7-supply = <&vph_pwr>; + vdd_s8-supply = <&vph_pwr>; + vdd_s9-supply = <&vph_pwr>; + vdd_s10-supply = <&vph_pwr>; + vdd_s11-supply = <&vph_pwr>; + vdd_s12-supply = <&vph_pwr>; + vdd_s13-supply = <&vph_pwr>; + vdd_l1_l27-supply = <&vreg_s7a_1p025>; + vdd_l2_l8_l17-supply = <&vreg_s3a_1p35>; + vdd_l3_l11-supply = <&vreg_s7a_1p025>; + vdd_l4_l5-supply = <&vreg_s7a_1p025>; + vdd_l6-supply = <&vreg_s5a_2p04>; + vdd_l7_l12_l14_l15-supply = <&vreg_s5a_2p04>; + vdd_l9-supply = <&vreg_bob>; + vdd_l10_l23_l25-supply = <&vreg_bob>; + vdd_l13_l19_l21-supply = <&vreg_bob>; + vdd_l16_l28-supply = <&vreg_bob>; + vdd_l18_l22-supply = <&vreg_bob>; + vdd_l20_l24-supply = <&vreg_bob>; + vdd_l26-supply = <&vreg_s3a_1p35>; + vdd_lvs1_lvs2-supply = <&vreg_s4a_1p8>; + + vreg_s3a_1p35: s3 { + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + }; + vreg_s4a_1p8: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_s5a_2p04: s5 { + regulator-min-microvolt = <1904000>; + regulator-max-microvolt = <2040000>; + }; + vreg_s7a_1p025: s7 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1028000>; + }; + vreg_l1a_0p875: l1 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + }; + vreg_l2a_1p2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + vreg_l3a_1p0: l3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + vreg_l5a_0p8: l5 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + }; + vreg_l6a_1p8: l6 { + regulator-min-microvolt = <1808000>; + regulator-max-microvolt = <1808000>; + }; + vreg_l7a_1p8: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l8a_1p2: l8 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + vreg_l9a_1p8: l9 { + regulator-min-microvolt = <1808000>; + regulator-max-microvolt = <2960000>; + }; + vreg_l10a_1p8: l10 { + regulator-min-microvolt = <1808000>; + regulator-max-microvolt = <2960000>; + }; + vreg_l11a_1p0: l11 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + vreg_l12a_1p8: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l13a_2p95: l13 { + regulator-min-microvolt = <1808000>; + regulator-max-microvolt = <2960000>; + }; + vreg_l14a_1p88: l14 { + regulator-min-microvolt = <1880000>; + regulator-max-microvolt = <1880000>; + }; + vreg_15a_1p8: l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l16a_2p7: l16 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2704000>; + }; + vreg_l17a_1p3: l17 { + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1304000>; + }; + vreg_l18a_2p7: l18 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2704000>; + }; + vreg_l19a_3p0: l19 { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + }; + vreg_l20a_2p95: l20 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + }; + vreg_l21a_2p95: l21 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + }; + vreg_l22a_2p85: l22 { + regulator-min-microvolt = <2864000>; + regulator-max-microvolt = <2864000>; + }; + vreg_l23a_3p3: l23 { + regulator-min-microvolt = <3312000>; + regulator-max-microvolt = <3312000>; + }; + vreg_l24a_3p075: l24 { + regulator-min-microvolt = <3088000>; + regulator-max-microvolt = <3088000>; + }; + vreg_l25a_3p3: l25 { + regulator-min-microvolt = <3104000>; + regulator-max-microvolt = <3312000>; + }; + vreg_l26a_1p2: l26 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + vreg_l28_3p0: l28 { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + }; + + vreg_lvs1a_1p8: lvs1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_lvs2a_1p8: lvs2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + }; + + pmi8998-regulators { + compatible = "qcom,rpm-pmi8998-regulators"; + + vdd_bob-supply = <&vph_pwr>; + + vreg_bob: bob { + regulator-min-microvolt = <3312000>; + regulator-max-microvolt = <3600000>; + }; + }; +}; diff --git a/dts/src/arm64/qcom/msm8998.dtsi b/dts/src/arm64/qcom/msm8998.dtsi new file mode 100644 index 0000000000..78227cce16 --- /dev/null +++ b/dts/src/arm64/qcom/msm8998.dtsi @@ -0,0 +1,690 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright (c) 2016, The Linux Foundation. All rights reserved. */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/qcom,gcc-msm8998.h> + +/ { + interrupt-parent = <&intc>; + + qcom,msm-id = <292 0x0>; + + #address-cells = <2>; + #size-cells = <2>; + + chosen { }; + + memory { + device_type = "memory"; + /* We expect the bootloader to fill in the reg */ + reg = <0 0 0 0>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + memory@85800000 { + reg = <0x0 0x85800000 0x0 0x800000>; + no-map; + }; + + smem_mem: smem-mem@86000000 { + reg = <0x0 0x86000000 0x0 0x200000>; + no-map; + }; + + memory@86200000 { + reg = <0x0 0x86200000 0x0 0x2600000>; + no-map; + }; + + rmtfs { + compatible = "qcom,rmtfs-mem"; + + size = <0x0 0x200000>; + alloc-ranges = <0x0 0xa0000000 0x0 0x2000000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <15>; + }; + }; + + clocks { + xo_board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <19200000>; + }; + + sleep_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32764>; + }; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x0>; + enable-method = "psci"; + efficiency = <1024>; + next-level-cache = <&L2_0>; + L2_0: l2-cache { + compatible = "arm,arch-cache"; + cache-level = <2>; + }; + L1_I_0: l1-icache { + compatible = "arm,arch-cache"; + }; + L1_D_0: l1-dcache { + compatible = "arm,arch-cache"; + }; + }; + + CPU1: cpu@1 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x1>; + enable-method = "psci"; + efficiency = <1024>; + next-level-cache = <&L2_0>; + L1_I_1: l1-icache { + compatible = "arm,arch-cache"; + }; + L1_D_1: l1-dcache { + compatible = "arm,arch-cache"; + }; + }; + + CPU2: cpu@2 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x2>; + enable-method = "psci"; + efficiency = <1024>; + next-level-cache = <&L2_0>; + L1_I_2: l1-icache { + compatible = "arm,arch-cache"; + }; + L1_D_2: l1-dcache { + compatible = "arm,arch-cache"; + }; + }; + + CPU3: cpu@3 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x3>; + enable-method = "psci"; + efficiency = <1024>; + next-level-cache = <&L2_0>; + L1_I_3: l1-icache { + compatible = "arm,arch-cache"; + }; + L1_D_3: l1-dcache { + compatible = "arm,arch-cache"; + }; + }; + + CPU4: cpu@100 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x100>; + enable-method = "psci"; + efficiency = <1536>; + next-level-cache = <&L2_1>; + L2_1: l2-cache { + compatible = "arm,arch-cache"; + cache-level = <2>; + }; + L1_I_100: l1-icache { + compatible = "arm,arch-cache"; + }; + L1_D_100: l1-dcache { + compatible = "arm,arch-cache"; + }; + }; + + CPU5: cpu@101 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x101>; + enable-method = "psci"; + efficiency = <1536>; + next-level-cache = <&L2_1>; + L1_I_101: l1-icache { + compatible = "arm,arch-cache"; + }; + L1_D_101: l1-dcache { + compatible = "arm,arch-cache"; + }; + }; + + CPU6: cpu@102 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x102>; + enable-method = "psci"; + efficiency = <1536>; + next-level-cache = <&L2_1>; + L1_I_102: l1-icache { + compatible = "arm,arch-cache"; + }; + L1_D_102: l1-dcache { + compatible = "arm,arch-cache"; + }; + }; + + CPU7: cpu@103 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x103>; + enable-method = "psci"; + efficiency = <1536>; + next-level-cache = <&L2_1>; + L1_I_103: l1-icache { + compatible = "arm,arch-cache"; + }; + L1_D_103: l1-dcache { + compatible = "arm,arch-cache"; + }; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + + core1 { + cpu = <&CPU1>; + }; + + core2 { + cpu = <&CPU2>; + }; + + core3 { + cpu = <&CPU3>; + }; + }; + + cluster1 { + core0 { + cpu = <&CPU4>; + }; + + core1 { + cpu = <&CPU5>; + }; + + core2 { + cpu = <&CPU6>; + }; + + core3 { + cpu = <&CPU7>; + }; + }; + }; + }; + + firmware { + scm { + compatible = "qcom,scm-msm8998"; + }; + }; + + tcsr_mutex: hwlock { + compatible = "qcom,tcsr-mutex"; + syscon = <&tcsr_mutex_regs 0 0x1000>; + #hwlock-cells = <1>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + rpm-glink { + compatible = "qcom,glink-rpm"; + + interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; + qcom,rpm-msg-ram = <&rpm_msg_ram>; + mboxes = <&apcs_glb 0>; + + rpm_requests: rpm-requests { + compatible = "qcom,rpm-msm8998"; + qcom,glink-channels = "rpm_requests"; + }; + }; + + smem { + compatible = "qcom,smem"; + memory-region = <&smem_mem>; + hwlocks = <&tcsr_mutex 3>; + }; + + smp2p-lpass { + compatible = "qcom,smp2p"; + qcom,smem = <443>, <429>; + + interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>; + + mboxes = <&apcs_glb 10>; + + qcom,local-pid = <0>; + qcom,remote-pid = <2>; + + adsp_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + adsp_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-mpss { + compatible = "qcom,smp2p"; + qcom,smem = <435>, <428>; + interrupts = <GIC_SPI 451 IRQ_TYPE_EDGE_RISING>; + mboxes = <&apcs_glb 14>; + qcom,local-pid = <0>; + qcom,remote-pid = <1>; + + modem_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + modem_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-slpi { + compatible = "qcom,smp2p"; + qcom,smem = <481>, <430>; + interrupts = <GIC_SPI 178 IRQ_TYPE_EDGE_RISING>; + mboxes = <&apcs_glb 26>; + qcom,local-pid = <0>; + qcom,remote-pid = <3>; + + slpi_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + slpi_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + thermal-zones { + cpu-thermal0 { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 6>; + + trips { + cpu_alert0: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_crit0: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu-thermal1 { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 7>; + + trips { + cpu_alert1: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_crit1: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu-thermal2 { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 8>; + + trips { + cpu_alert2: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_crit2: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu-thermal3 { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 9>; + + trips { + cpu_alert3: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_crit3: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu-thermal4 { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 10>; + + trips { + cpu_alert4: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_crit4: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu-thermal5 { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 11>; + + trips { + cpu_alert5: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_crit5: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu-thermal6 { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 0>; + + trips { + cpu_alert6: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_crit6: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu-thermal7 { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 1>; + + trips { + cpu_alert7: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_crit7: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + gpu-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 3>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 1 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 2 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 3 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 0 IRQ_TYPE_LEVEL_LOW>; + }; + + soc: soc { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0xffffffff>; + compatible = "simple-bus"; + + rpm_msg_ram: memory@68000 { + compatible = "qcom,rpm-msg-ram"; + reg = <0x778000 0x7000>; + }; + + qfprom: qfprom@780000 { + compatible = "qcom,qfprom"; + reg = <0x780000 0x621c>; + #address-cells = <1>; + #size-cells = <1>; + }; + + gcc: clock-controller@100000 { + compatible = "qcom,gcc-msm8998"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + reg = <0x100000 0xb0000>; + }; + + tlmm: pinctrl@3400000 { + compatible = "qcom,msm8998-pinctrl"; + reg = <0x3400000 0xc00000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <0x2>; + interrupt-controller; + #interrupt-cells = <0x2>; + }; + + spmi_bus: spmi@800f000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0x800f000 0x1000>, + <0x8400000 0x1000000>, + <0x9400000 0x1000000>, + <0xa400000 0x220000>, + <0x800a000 0x3000>; + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; + interrupt-names = "periph_irq"; + interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + cell-index = <0>; + }; + + tsens0: thermal@10aa000 { + compatible = "qcom,msm8998-tsens", "qcom,tsens-v2"; + reg = <0x10aa000 0x2000>; + + #qcom,sensors = <12>; + #thermal-sensor-cells = <1>; + }; + + tsens1: thermal@10ad000 { + compatible = "qcom,msm8998-tsens", "qcom,tsens-v2"; + reg = <0x10ad000 0x2000>; + + #qcom,sensors = <8>; + #thermal-sensor-cells = <1>; + }; + + tcsr_mutex_regs: syscon@1f40000 { + compatible = "syscon"; + reg = <0x1f40000 0x20000>; + }; + + apcs_glb: mailbox@9820000 { + compatible = "qcom,msm8998-apcs-hmss-global"; + reg = <0x17911000 0x1000>; + + #mbox-cells = <1>; + }; + + blsp2_uart1: serial@c1b0000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0xc1b0000 0x1000>; + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + timer@17920000 { + #address-cells = <1>; + #size-cells = <1>; + ranges; + compatible = "arm,armv7-timer-mem"; + reg = <0x17920000 0x1000>; + + frame@17921000 { + frame-number = <0>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x17921000 0x1000>, + <0x17922000 0x1000>; + }; + + frame@17923000 { + frame-number = <1>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x17923000 0x1000>; + status = "disabled"; + }; + + frame@17924000 { + frame-number = <2>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x17924000 0x1000>; + status = "disabled"; + }; + + frame@17925000 { + frame-number = <3>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x17925000 0x1000>; + status = "disabled"; + }; + + frame@17926000 { + frame-number = <4>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x17926000 0x1000>; + status = "disabled"; + }; + + frame@17927000 { + frame-number = <5>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x17927000 0x1000>; + status = "disabled"; + }; + + frame@17928000 { + frame-number = <6>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x17928000 0x1000>; + status = "disabled"; + }; + }; + + intc: interrupt-controller@17a00000 { + compatible = "arm,gic-v3"; + reg = <0x17a00000 0x10000>, /* GICD */ + <0x17b00000 0x100000>; /* GICR * 8 */ + #interrupt-cells = <3>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + interrupt-controller; + #redistributor-regions = <1>; + redistributor-stride = <0x0 0x20000>; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + }; + }; +}; diff --git a/dts/src/arm64/qcom/pm8916.dtsi b/dts/src/arm64/qcom/pm8916.dtsi index 196b1c0ceb..15a37cbcd2 100644 --- a/dts/src/arm64/qcom/pm8916.dtsi +++ b/dts/src/arm64/qcom/pm8916.dtsi @@ -1,6 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 #include <dt-bindings/iio/qcom,spmi-vadc.h> #include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/input/linux-event-codes.h> #include <dt-bindings/spmi/spmi.h> &spmi_bus { @@ -18,12 +19,19 @@ interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; }; - pwrkey@800 { - compatible = "qcom,pm8941-pwrkey"; + pon@800 { + compatible = "qcom,pm8916-pon"; reg = <0x800>; - interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; - debounce = <15625>; - bias-pull-up; + mode-bootloader = <0x2>; + mode-recovery = <0x1>; + + pwrkey { + compatible = "qcom,pm8941-pwrkey"; + interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = <KEY_POWER>; + }; }; pm8916_gpios: gpios@c000 { diff --git a/dts/src/arm64/qcom/pm8994.dtsi b/dts/src/arm64/qcom/pm8994.dtsi index 80024c0b1c..76b5a3e6a2 100644 --- a/dts/src/arm64/qcom/pm8994.dtsi +++ b/dts/src/arm64/qcom/pm8994.dtsi @@ -1,6 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/spmi/spmi.h> +#include <dt-bindings/input/linux-event-codes.h> &spmi_bus { @@ -17,6 +18,23 @@ interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; }; + pon@800 { + compatible = "qcom,pm8916-pon"; + + reg = <0x800>; + mode-bootloader = <0x2>; + mode-recovery = <0x1>; + + pwrkey { + compatible = "qcom,pm8941-pwrkey"; + interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = <KEY_POWER>; + }; + + }; + pm8994_gpios: gpios@c000 { compatible = "qcom,pm8994-gpio"; reg = <0xc000>; diff --git a/dts/src/arm64/qcom/pm8998.dtsi b/dts/src/arm64/qcom/pm8998.dtsi index 92bed1e7d4..048f19fa01 100644 --- a/dts/src/arm64/qcom/pm8998.dtsi +++ b/dts/src/arm64/qcom/pm8998.dtsi @@ -1,8 +1,35 @@ // SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* Copyright 2018 Google LLC. */ -#include <dt-bindings/spmi/spmi.h> +#include <dt-bindings/iio/qcom,spmi-vadc.h> +#include <dt-bindings/input/linux-event-codes.h> #include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> +#include <dt-bindings/thermal/thermal.h> + +/ { + thermal-zones { + pm8998 { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&pm8998_temp>; + + trips { + pm8998_alert0: pm8998-alert0 { + temperature = <105000>; + hysteresis = <2000>; + type = "passive"; + }; + pm8998_crit: pm8998-crit { + temperature = <125000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + }; +}; &spmi_bus { pm8998_lsid0: pmic@0 { @@ -11,6 +38,52 @@ #address-cells = <1>; #size-cells = <0>; + pm8998_pon: pon@800 { + compatible = "qcom,pm8916-pon"; + + reg = <0x800>; + mode-bootloader = <0x2>; + mode-recovery = <0x1>; + + pwrkey { + compatible = "qcom,pm8941-pwrkey"; + interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = <KEY_POWER>; + }; + }; + + pm8998_temp: temp-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400>; + interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>; + #thermal-sensor-cells = <0>; + }; + + pm8998_coincell: coincell@2800 { + compatible = "qcom,pm8941-coincell"; + reg = <0x2800>; + + status = "disabled"; + }; + + pm8998_adc: adc@3100 { + compatible = "qcom,spmi-adc-rev2"; + reg = <0x3100>; + interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + }; + + rtc@6000 { + compatible = "qcom,pm8941-rtc"; + reg = <0x6000>, <0x6100>; + reg-names = "rtc", "alarm"; + interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; + }; + pm8998_gpio: gpios@c000 { compatible = "qcom,pm8998-gpio", "qcom,spmi-gpio"; reg = <0xc000>; diff --git a/dts/src/arm64/qcom/pmi8998.dtsi b/dts/src/arm64/qcom/pmi8998.dtsi new file mode 100644 index 0000000000..da3285e216 --- /dev/null +++ b/dts/src/arm64/qcom/pmi8998.dtsi @@ -0,0 +1,40 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> + +&spmi_bus { + pmi8998_lsid0: pmic@2 { + compatible = "qcom,pmi8998", "qcom,spmi-pmic"; + reg = <0x2 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmi8998_gpio: gpios@c000 { + compatible = "qcom,pmi8998-gpio", "qcom,spmi-gpio"; + reg = <0xc000>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <0 0xc0 0 IRQ_TYPE_NONE>, + <0 0xc1 0 IRQ_TYPE_NONE>, + <0 0xc2 0 IRQ_TYPE_NONE>, + <0 0xc3 0 IRQ_TYPE_NONE>, + <0 0xc4 0 IRQ_TYPE_NONE>, + <0 0xc5 0 IRQ_TYPE_NONE>, + <0 0xc6 0 IRQ_TYPE_NONE>, + <0 0xc7 0 IRQ_TYPE_NONE>, + <0 0xc8 0 IRQ_TYPE_NONE>, + <0 0xc9 0 IRQ_TYPE_NONE>, + <0 0xca 0 IRQ_TYPE_NONE>, + <0 0xcb 0 IRQ_TYPE_NONE>, + <0 0xcc 0 IRQ_TYPE_NONE>, + <0 0xcd 0 IRQ_TYPE_NONE>; + }; + }; + + pmi8998_lsid1: pmic@3 { + compatible = "qcom,pmi8998", "qcom,spmi-pmic"; + reg = <0x3 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + }; +}; diff --git a/dts/src/arm64/qcom/sdm845-mtp.dts b/dts/src/arm64/qcom/sdm845-mtp.dts index 6d651f3141..eedfaf8922 100644 --- a/dts/src/arm64/qcom/sdm845-mtp.dts +++ b/dts/src/arm64/qcom/sdm845-mtp.dts @@ -7,6 +7,7 @@ /dts-v1/; +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include "sdm845.dtsi" / { @@ -20,6 +21,326 @@ chosen { stdout-path = "serial0:115200n8"; }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + }; + + /* + * Apparently RPMh does not provide support for PM8998 S4 because it + * is always-on; model it as a fixed regulator. + */ + vreg_s4a_1p8: pm8998-smps4 { + compatible = "regulator-fixed"; + regulator-name = "vreg_s4a_1p8"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-always-on; + regulator-boot-on; + + vin-supply = <&vph_pwr>; + }; +}; + +&apps_rsc { + pm8998-rpmh-regulators { + compatible = "qcom,pm8998-rpmh-regulators"; + qcom,pmic-id = "a"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + vdd-s11-supply = <&vph_pwr>; + vdd-s12-supply = <&vph_pwr>; + vdd-s13-supply = <&vph_pwr>; + vdd-l1-l27-supply = <&vreg_s7a_1p025>; + vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>; + vdd-l3-l11-supply = <&vreg_s7a_1p025>; + vdd-l4-l5-supply = <&vreg_s7a_1p025>; + vdd-l6-supply = <&vph_pwr>; + vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>; + vdd-l9-supply = <&vreg_bob>; + vdd-l10-l23-l25-supply = <&vreg_bob>; + vdd-l13-l19-l21-supply = <&vreg_bob>; + vdd-l16-l28-supply = <&vreg_bob>; + vdd-l18-l22-supply = <&vreg_bob>; + vdd-l20-l24-supply = <&vreg_bob>; + vdd-l26-supply = <&vreg_s3a_1p35>; + vin-lvs-1-2-supply = <&vreg_s4a_1p8>; + + vreg_s2a_1p125: smps2 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + }; + + vreg_s3a_1p35: smps3 { + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + }; + + vreg_s5a_2p04: smps5 { + regulator-min-microvolt = <1904000>; + regulator-max-microvolt = <2040000>; + }; + + vreg_s7a_1p025: smps7 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1028000>; + }; + + vdd_qusb_hs0: + vdda_hp_pcie_core: + vdda_mipi_csi0_0p9: + vdda_mipi_csi1_0p9: + vdda_mipi_csi2_0p9: + vdda_mipi_dsi0_pll: + vdda_mipi_dsi1_pll: + vdda_qlink_lv: + vdda_qlink_lv_ck: + vdda_qrefs_0p875: + vdda_pcie_core: + vdda_pll_cc_ebi01: + vdda_pll_cc_ebi23: + vdda_sp_sensor: + vdda_ufs1_core: + vdda_ufs2_core: + vdda_usb1_ss_core: + vdda_usb2_ss_core: + vreg_l1a_0p875: ldo1 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vddpx_10: + vreg_l2a_1p2: ldo2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; + }; + + vreg_l3a_1p0: ldo3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdd_wcss_cx: + vdd_wcss_mx: + vdda_wcss_pll: + vreg_l5a_0p8: ldo5 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vddpx_13: + vreg_l6a_1p8: ldo6 { + regulator-min-microvolt = <1856000>; + regulator-max-microvolt = <1856000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7a_1p8: ldo7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8a_1p2: ldo8 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1248000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9a_1p8: ldo9 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10a_1p8: ldo10 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11a_1p0: ldo11 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1048000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdd_qfprom: + vdd_qfprom_sp: + vdda_apc1_cs_1p8: + vdda_gfx_cs_1p8: + vdda_qrefs_1p8: + vdda_qusb_hs0_1p8: + vddpx_11: + vreg_l12a_1p8: ldo12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vddpx_2: + vreg_l13a_2p95: ldo13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l14a_1p88: ldo14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l15a_1p8: ldo15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l16a_2p7: ldo16 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2704000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l17a_1p3: ldo17 { + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l18a_2p7: ldo18 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l19a_3p0: ldo19 { + regulator-min-microvolt = <2856000>; + regulator-max-microvolt = <3104000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l20a_2p95: ldo20 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l21a_2p95: ldo21 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l22a_2p85: ldo22 { + regulator-min-microvolt = <2864000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l23a_3p3: ldo23 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdda_qusb_hs0_3p1: + vreg_l24a_3p075: ldo24 { + regulator-min-microvolt = <3088000>; + regulator-max-microvolt = <3088000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l25a_3p3: ldo25 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdda_hp_pcie_1p2: + vdda_hv_ebi0: + vdda_hv_ebi1: + vdda_hv_ebi2: + vdda_hv_ebi3: + vdda_mipi_csi_1p25: + vdda_mipi_dsi0_1p2: + vdda_mipi_dsi1_1p2: + vdda_pcie_1p2: + vdda_ufs1_1p2: + vdda_ufs2_1p2: + vdda_usb1_ss_1p2: + vdda_usb2_ss_1p2: + vreg_l26a_1p2: ldo26 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l28a_3p0: ldo28 { + regulator-min-microvolt = <2856000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_lvs1a_1p8: lvs1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_lvs2a_1p8: lvs2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + }; + + pmi8998-rpmh-regulators { + compatible = "qcom,pmi8998-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-bob-supply = <&vph_pwr>; + + vreg_bob: bob { + regulator-min-microvolt = <3312000>; + regulator-max-microvolt = <3600000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + regulator-allow-bypass; + }; + }; + + pm8005-rpmh-regulators { + compatible = "qcom,pm8005-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + + vreg_s3c_0p6: smps3 { + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <600000>; + }; + }; }; &i2c10 { @@ -35,6 +356,67 @@ status = "okay"; }; +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + /* Until we have Type C hooked up we'll force this as host. */ + dr_mode = "host"; +}; + +&usb_1_hsphy { + status = "okay"; + + vdd-supply = <&vdda_usb1_ss_core>; + vdda-pll-supply = <&vdda_qusb_hs0_1p8>; + vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>; + + qcom,imp-res-offset-value = <8>; + qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>; + qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>; + qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>; +}; + +&usb_1_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vdda_usb1_ss_1p2>; + vdda-pll-supply = <&vdda_usb1_ss_core>; +}; + +&usb_2 { + status = "okay"; +}; + +&usb_2_dwc3 { + /* + * Though the USB block on SDM845 can support host, there's no vbus + * signal for this port on MTP. Thus (unless you have a non-compliant + * hub that works without vbus) the only sensible thing is to force + * peripheral mode. + */ + dr_mode = "peripheral"; +}; + +&usb_2_hsphy { + status = "okay"; + + vdd-supply = <&vdda_usb2_ss_core>; + vdda-pll-supply = <&vdda_qusb_hs0_1p8>; + vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>; + + qcom,imp-res-offset-value = <8>; + qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_22_8_MA>; +}; + +&usb_2_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vdda_usb2_ss_1p2>; + vdda-pll-supply = <&vdda_usb2_ss_core>; +}; + /* PINCTRL - additions to nodes defined in sdm845.dtsi */ &qup_i2c10_default { diff --git a/dts/src/arm64/qcom/sdm845.dtsi b/dts/src/arm64/qcom/sdm845.dtsi index 0c9a2aa6a1..b72bdb0a31 100644 --- a/dts/src/arm64/qcom/sdm845.dtsi +++ b/dts/src/arm64/qcom/sdm845.dtsi @@ -5,9 +5,12 @@ * Copyright (c) 2018, The Linux Foundation. All rights reserved. */ +#include <dt-bindings/clock/qcom,dispcc-sdm845.h> #include <dt-bindings/clock/qcom,gcc-sdm845.h> #include <dt-bindings/clock/qcom,rpmh.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/phy/phy-qcom-qusb2.h> +#include <dt-bindings/reset/qcom,sdm845-aoss.h> #include <dt-bindings/soc/qcom,rpmh-rsc.h> / { @@ -230,6 +233,94 @@ hwlocks = <&tcsr_mutex 3>; }; + smp2p-cdsp { + compatible = "qcom,smp2p"; + qcom,smem = <94>, <432>; + + interrupts = <GIC_SPI 576 IRQ_TYPE_EDGE_RISING>; + + mboxes = <&apss_shared 6>; + + qcom,local-pid = <0>; + qcom,remote-pid = <5>; + + cdsp_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + cdsp_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-lpass { + compatible = "qcom,smp2p"; + qcom,smem = <443>, <429>; + + interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>; + + mboxes = <&apss_shared 10>; + + qcom,local-pid = <0>; + qcom,remote-pid = <2>; + + adsp_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + adsp_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-mpss { + compatible = "qcom,smp2p"; + qcom,smem = <435>, <428>; + interrupts = <GIC_SPI 451 IRQ_TYPE_EDGE_RISING>; + mboxes = <&apss_shared 14>; + qcom,local-pid = <0>; + qcom,remote-pid = <1>; + + modem_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + modem_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-slpi { + compatible = "qcom,smp2p"; + qcom,smem = <481>, <430>; + interrupts = <GIC_SPI 172 IRQ_TYPE_EDGE_RISING>; + mboxes = <&apss_shared 26>; + qcom,local-pid = <0>; + qcom,remote-pid = <3>; + + slpi_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + slpi_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + psci { compatible = "arm,psci-1.0"; method = "smc"; @@ -249,6 +340,23 @@ #power-domain-cells = <1>; }; + qfprom@784000 { + compatible = "qcom,qfprom"; + reg = <0x784000 0x8ff>; + #address-cells = <1>; + #size-cells = <1>; + + qusb2p_hstx_trim: hstx-trim-primary@1eb { + reg = <0x1eb 0x1>; + bits = <1 4>; + }; + + qusb2s_hstx_trim: hstx-trim-secondary@1eb { + reg = <0x1eb 0x2>; + bits = <6 4>; + }; + }; + qupv3_id_0: geniqup@8c0000 { compatible = "qcom,geni-se-qup"; reg = <0x8c0000 0x6000>; @@ -962,6 +1070,192 @@ }; }; + usb_1_hsphy: phy@88e2000 { + compatible = "qcom,sdm845-qusb2-phy"; + reg = <0x88e2000 0x400>; + status = "disabled"; + #phy-cells = <0>; + + clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "cfg_ahb", "ref"; + + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + + nvmem-cells = <&qusb2p_hstx_trim>; + }; + + usb_2_hsphy: phy@88e3000 { + compatible = "qcom,sdm845-qusb2-phy"; + reg = <0x88e3000 0x400>; + status = "disabled"; + #phy-cells = <0>; + + clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "cfg_ahb", "ref"; + + resets = <&gcc GCC_QUSB2PHY_SEC_BCR>; + + nvmem-cells = <&qusb2s_hstx_trim>; + }; + + usb_1_qmpphy: phy@88e9000 { + compatible = "qcom,sdm845-qmp-usb3-phy"; + reg = <0x88e9000 0x18c>, + <0x88e8000 0x10>; + reg-names = "reg-base", "dp_com"; + status = "disabled"; + #clock-cells = <1>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, + <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, + <&gcc GCC_USB3_PRIM_CLKREF_CLK>, + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>; + clock-names = "aux", "cfg_ahb", "ref", "com_aux"; + + resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>, + <&gcc GCC_USB3_PHY_PRIM_BCR>; + reset-names = "phy", "common"; + + usb_1_ssphy: lane@88e9200 { + reg = <0x88e9200 0x128>, + <0x88e9400 0x200>, + <0x88e9c00 0x218>, + <0x88e9a00 0x100>; + #phy-cells = <0>; + clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "usb3_phy_pipe_clk_src"; + }; + }; + + usb_2_qmpphy: phy@88eb000 { + compatible = "qcom,sdm845-qmp-usb3-uni-phy"; + reg = <0x88eb000 0x18c>; + status = "disabled"; + #clock-cells = <1>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>, + <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, + <&gcc GCC_USB3_SEC_CLKREF_CLK>, + <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>; + clock-names = "aux", "cfg_ahb", "ref", "com_aux"; + + resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>, + <&gcc GCC_USB3_PHY_SEC_BCR>; + reset-names = "phy", "common"; + + usb_2_ssphy: lane@88eb200 { + reg = <0x88eb200 0x128>, + <0x88eb400 0x1fc>, + <0x88eb800 0x218>, + <0x88e9600 0x70>; + #phy-cells = <0>; + clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "usb3_uni_phy_pipe_clk_src"; + }; + }; + + usb_1: usb@a6f8800 { + compatible = "qcom,sdm845-dwc3", "qcom,dwc3"; + reg = <0xa6f8800 0x400>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_SLEEP_CLK>; + clock-names = "cfg_noc", "core", "iface", "mock_utmi", + "sleep"; + + assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>; + assigned-clock-rates = <19200000>, <150000000>; + + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 488 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 489 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hs_phy_irq", "ss_phy_irq", + "dm_hs_phy_irq", "dp_hs_phy_irq"; + + power-domains = <&gcc USB30_PRIM_GDSC>; + + resets = <&gcc GCC_USB30_PRIM_BCR>; + + usb_1_dwc3: dwc3@a600000 { + compatible = "snps,dwc3"; + reg = <0xa600000 0xcd00>; + interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + phys = <&usb_1_hsphy>, <&usb_1_ssphy>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; + + usb_2: usb@a8f8800 { + compatible = "qcom,sdm845-dwc3", "qcom,dwc3"; + reg = <0xa8f8800 0x400>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>, + <&gcc GCC_USB30_SEC_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>, + <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_SEC_SLEEP_CLK>; + clock-names = "cfg_noc", "core", "iface", "mock_utmi", + "sleep"; + + assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_SEC_MASTER_CLK>; + assigned-clock-rates = <19200000>, <150000000>; + + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 487 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 490 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 491 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hs_phy_irq", "ss_phy_irq", + "dm_hs_phy_irq", "dp_hs_phy_irq"; + + power-domains = <&gcc USB30_SEC_GDSC>; + + resets = <&gcc GCC_USB30_SEC_BCR>; + + usb_2_dwc3: dwc3@a800000 { + compatible = "snps,dwc3"; + reg = <0xa800000 0xcd00>; + interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + phys = <&usb_2_hsphy>, <&usb_2_ssphy>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; + + dispcc: clock-controller@af00000 { + compatible = "qcom,sdm845-dispcc"; + reg = <0xaf00000 0x10000>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + tsens0: thermal-sensor@c263000 { compatible = "qcom,sdm845-tsens", "qcom,tsens-v2"; reg = <0xc263000 0x1ff>, /* TM */ @@ -978,6 +1272,12 @@ #thermal-sensor-cells = <1>; }; + aoss_reset: reset-controller@c2a0000 { + compatible = "qcom,sdm845-aoss-cc"; + reg = <0xc2a0000 0x31000>; + #reset-cells = <1>; + }; + spmi_bus: spmi@c440000 { compatible = "qcom,spmi-pmic-arb"; reg = <0xc440000 0x1100>, diff --git a/dts/src/arm64/renesas/r8a774a1.dtsi b/dts/src/arm64/renesas/r8a774a1.dtsi new file mode 100644 index 0000000000..012cbb6424 --- /dev/null +++ b/dts/src/arm64/renesas/r8a774a1.dtsi @@ -0,0 +1,1663 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the r8a774a1 SoC + * + * Copyright (C) 2018 Renesas Electronics Corp. + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/renesas-cpg-mssr.h> + +/ { + compatible = "renesas,r8a774a1"; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + i2c6 = &i2c6; + i2c7 = &i2c_dvfs; + }; + + /* + * The external audio clocks are configured as 0 Hz fixed frequency + * clocks by default. + * Boards that provide audio clocks should override them. + */ + audio_clk_a: audio_clk_a { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + audio_clk_b: audio_clk_b { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + audio_clk_c: audio_clk_c { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + /* External CAN clock - to be overridden by boards that provide it */ + can_clk: can { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + a57_0: cpu@0 { + compatible = "arm,cortex-a57", "arm,armv8"; + reg = <0x0>; + device_type = "cpu"; + power-domains = <&sysc 0>; + next-level-cache = <&L2_CA57>; + enable-method = "psci"; + clocks = <&cpg CPG_CORE 0>; + }; + + a57_1: cpu@1 { + compatible = "arm,cortex-a57", "arm,armv8"; + reg = <0x1>; + device_type = "cpu"; + power-domains = <&sysc 1>; + next-level-cache = <&L2_CA57>; + enable-method = "psci"; + clocks = <&cpg CPG_CORE 0>; + }; + + a53_0: cpu@100 { + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x100>; + device_type = "cpu"; + power-domains = <&sysc 5>; + next-level-cache = <&L2_CA53>; + enable-method = "psci"; + clocks =<&cpg CPG_CORE 1>; + }; + + a53_1: cpu@101 { + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x101>; + device_type = "cpu"; + power-domains = <&sysc 6>; + next-level-cache = <&L2_CA53>; + enable-method = "psci"; + clocks =<&cpg CPG_CORE 1>; + }; + + a53_2: cpu@102 { + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x102>; + device_type = "cpu"; + power-domains = <&sysc 7>; + next-level-cache = <&L2_CA53>; + enable-method = "psci"; + clocks =<&cpg CPG_CORE 1>; + }; + + a53_3: cpu@103 { + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x103>; + device_type = "cpu"; + power-domains = <&sysc 8>; + next-level-cache = <&L2_CA53>; + enable-method = "psci"; + clocks =<&cpg CPG_CORE 1>; + }; + + L2_CA57: cache-controller-0 { + compatible = "cache"; + power-domains = <&sysc 12>; + cache-unified; + cache-level = <2>; + }; + + L2_CA53: cache-controller-1 { + compatible = "cache"; + power-domains = <&sysc 21>; + cache-unified; + cache-level = <2>; + }; + }; + + extal_clk: extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board */ + clock-frequency = <0>; + }; + + extalr_clk: extalr { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board */ + clock-frequency = <0>; + }; + + /* External PCIe clock - can be overridden by the board */ + pcie_bus_clk: pcie_bus { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + pmu_a53 { + compatible = "arm,cortex-a53-pmu"; + interrupts-extended = <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&a53_0>, <&a53_1>, <&a53_2>, <&a53_3>; + }; + + pmu_a57 { + compatible = "arm,cortex-a57-pmu"; + interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&a57_0>, <&a57_1>; + }; + + psci { + compatible = "arm,psci-1.0", "arm,psci-0.2"; + method = "smc"; + }; + + /* External SCIF clock - to be overridden by boards that provide it */ + scif_clk: scif { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + soc { + compatible = "simple-bus"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + rwdt: watchdog@e6020000 { + compatible = "renesas,r8a774a1-wdt", + "renesas,rcar-gen3-wdt"; + reg = <0 0xe6020000 0 0x0c>; + clocks = <&cpg CPG_MOD 402>; + power-domains = <&sysc 32>; + resets = <&cpg 402>; + status = "disabled"; + }; + + gpio0: gpio@e6050000 { + compatible = "renesas,gpio-r8a774a1", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6050000 0 0x50>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 0 16>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 912>; + power-domains = <&sysc 32>; + resets = <&cpg 912>; + }; + + gpio1: gpio@e6051000 { + compatible = "renesas,gpio-r8a774a1", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6051000 0 0x50>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 32 29>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 911>; + power-domains = <&sysc 32>; + resets = <&cpg 911>; + }; + + gpio2: gpio@e6052000 { + compatible = "renesas,gpio-r8a774a1", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6052000 0 0x50>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 64 15>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 910>; + power-domains = <&sysc 32>; + resets = <&cpg 910>; + }; + + gpio3: gpio@e6053000 { + compatible = "renesas,gpio-r8a774a1", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6053000 0 0x50>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 96 16>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 909>; + power-domains = <&sysc 32>; + resets = <&cpg 909>; + }; + + gpio4: gpio@e6054000 { + compatible = "renesas,gpio-r8a774a1", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6054000 0 0x50>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 128 18>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 908>; + power-domains = <&sysc 32>; + resets = <&cpg 908>; + }; + + gpio5: gpio@e6055000 { + compatible = "renesas,gpio-r8a774a1", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6055000 0 0x50>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 160 26>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 907>; + power-domains = <&sysc 32>; + resets = <&cpg 907>; + }; + + gpio6: gpio@e6055400 { + compatible = "renesas,gpio-r8a774a1", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6055400 0 0x50>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 192 32>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 906>; + power-domains = <&sysc 32>; + resets = <&cpg 906>; + }; + + gpio7: gpio@e6055800 { + compatible = "renesas,gpio-r8a774a1", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6055800 0 0x50>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 224 4>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 905>; + power-domains = <&sysc 32>; + resets = <&cpg 905>; + }; + + pfc: pin-controller@e6060000 { + compatible = "renesas,pfc-r8a774a1"; + reg = <0 0xe6060000 0 0x50c>; + }; + + cpg: clock-controller@e6150000 { + compatible = "renesas,r8a774a1-cpg-mssr"; + reg = <0 0xe6150000 0 0x0bb0>; + clocks = <&extal_clk>, <&extalr_clk>; + clock-names = "extal", "extalr"; + #clock-cells = <2>; + #power-domain-cells = <0>; + #reset-cells = <1>; + }; + + rst: reset-controller@e6160000 { + compatible = "renesas,r8a774a1-rst"; + reg = <0 0xe6160000 0 0x018c>; + }; + + sysc: system-controller@e6180000 { + compatible = "renesas,r8a774a1-sysc"; + reg = <0 0xe6180000 0 0x0400>; + #power-domain-cells = <1>; + }; + + tsc: thermal@e6198000 { + compatible = "renesas,r8a774a1-thermal"; + reg = <0 0xe6198000 0 0x100>, + <0 0xe61a0000 0 0x100>, + <0 0xe61a8000 0 0x100>; + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 522>; + power-domains = <&sysc 32>; + resets = <&cpg 522>; + #thermal-sensor-cells = <1>; + }; + + intc_ex: interrupt-controller@e61c0000 { + compatible = "renesas,intc-ex-r8a774a1", "renesas,irqc"; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0 0xe61c0000 0 0x200>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 407>; + power-domains = <&sysc 32>; + resets = <&cpg 407>; + }; + + i2c0: i2c@e6500000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a774a1", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe6500000 0 0x40>; + interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 931>; + power-domains = <&sysc 32>; + resets = <&cpg 931>; + dmas = <&dmac1 0x91>, <&dmac1 0x90>, + <&dmac2 0x91>, <&dmac2 0x90>; + dma-names = "tx", "rx", "tx", "rx"; + i2c-scl-internal-delay-ns = <110>; + status = "disabled"; + }; + + i2c1: i2c@e6508000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a774a1", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe6508000 0 0x40>; + interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 930>; + power-domains = <&sysc 32>; + resets = <&cpg 930>; + dmas = <&dmac1 0x93>, <&dmac1 0x92>, + <&dmac2 0x93>, <&dmac2 0x92>; + dma-names = "tx", "rx", "tx", "rx"; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c2: i2c@e6510000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a774a1", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe6510000 0 0x40>; + interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 929>; + power-domains = <&sysc 32>; + resets = <&cpg 929>; + dmas = <&dmac1 0x95>, <&dmac1 0x94>, + <&dmac2 0x95>, <&dmac2 0x94>; + dma-names = "tx", "rx", "tx", "rx"; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c3: i2c@e66d0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a774a1", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe66d0000 0 0x40>; + interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 928>; + power-domains = <&sysc 32>; + resets = <&cpg 928>; + dmas = <&dmac0 0x97>, <&dmac0 0x96>; + dma-names = "tx", "rx"; + i2c-scl-internal-delay-ns = <110>; + status = "disabled"; + }; + + i2c4: i2c@e66d8000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a774a1", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe66d8000 0 0x40>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 927>; + power-domains = <&sysc 32>; + resets = <&cpg 927>; + dmas = <&dmac0 0x99>, <&dmac0 0x98>; + dma-names = "tx", "rx"; + i2c-scl-internal-delay-ns = <110>; + status = "disabled"; + }; + + i2c5: i2c@e66e0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a774a1", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe66e0000 0 0x40>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 919>; + power-domains = <&sysc 32>; + resets = <&cpg 919>; + dmas = <&dmac0 0x9b>, <&dmac0 0x9a>; + dma-names = "tx", "rx"; + i2c-scl-internal-delay-ns = <110>; + status = "disabled"; + }; + + i2c6: i2c@e66e8000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a774a1", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe66e8000 0 0x40>; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 918>; + power-domains = <&sysc 32>; + resets = <&cpg 918>; + dmas = <&dmac0 0x9d>, <&dmac0 0x9c>; + dma-names = "tx", "rx"; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c_dvfs: i2c@e60b0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-r8a774a1", + "renesas,rcar-gen3-iic", + "renesas,rmobile-iic"; + reg = <0 0xe60b0000 0 0x425>; + interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 926>; + power-domains = <&sysc 32>; + resets = <&cpg 926>; + dmas = <&dmac0 0x11>, <&dmac0 0x10>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + hscif0: serial@e6540000 { + compatible = "renesas,hscif-r8a774a1", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe6540000 0 0x60>; + interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 520>, + <&cpg CPG_CORE 19>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x31>, <&dmac1 0x30>, + <&dmac2 0x31>, <&dmac2 0x30>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc 32>; + resets = <&cpg 520>; + status = "disabled"; + }; + + hscif1: serial@e6550000 { + compatible = "renesas,hscif-r8a774a1", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe6550000 0 0x60>; + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 519>, + <&cpg CPG_CORE 19>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x33>, <&dmac1 0x32>, + <&dmac2 0x33>, <&dmac2 0x32>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc 32>; + resets = <&cpg 519>; + status = "disabled"; + }; + + hscif2: serial@e6560000 { + compatible = "renesas,hscif-r8a774a1", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe6560000 0 0x60>; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 518>, + <&cpg CPG_CORE 19>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x35>, <&dmac1 0x34>, + <&dmac2 0x35>, <&dmac2 0x34>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc 32>; + resets = <&cpg 518>; + status = "disabled"; + }; + + hscif3: serial@e66a0000 { + compatible = "renesas,hscif-r8a774a1", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe66a0000 0 0x60>; + interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 517>, + <&cpg CPG_CORE 19>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x37>, <&dmac0 0x36>; + dma-names = "tx", "rx"; + power-domains = <&sysc 32>; + resets = <&cpg 517>; + status = "disabled"; + }; + + hscif4: serial@e66b0000 { + compatible = "renesas,hscif-r8a774a1", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe66b0000 0 0x60>; + interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 516>, + <&cpg CPG_CORE 19>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x39>, <&dmac0 0x38>; + dma-names = "tx", "rx"; + power-domains = <&sysc 32>; + resets = <&cpg 516>; + status = "disabled"; + }; + + hsusb: usb@e6590000 { + compatible = "renesas,usbhs-r8a774a1", + "renesas,rcar-gen3-usbhs"; + reg = <0 0xe6590000 0 0x100>; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 704>; + dmas = <&usb_dmac0 0>, <&usb_dmac0 1>, + <&usb_dmac1 0>, <&usb_dmac1 1>; + dma-names = "ch0", "ch1", "ch2", "ch3"; + renesas,buswait = <11>; + phys = <&usb2_phy0>; + phy-names = "usb"; + power-domains = <&sysc 32>; + resets = <&cpg 704>; + status = "disabled"; + }; + + usb_dmac0: dma-controller@e65a0000 { + compatible = "renesas,r8a774a1-usb-dmac", + "renesas,usb-dmac"; + reg = <0 0xe65a0000 0 0x100>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1"; + clocks = <&cpg CPG_MOD 330>; + power-domains = <&sysc 32>; + resets = <&cpg 330>; + #dma-cells = <1>; + dma-channels = <2>; + }; + + usb_dmac1: dma-controller@e65b0000 { + compatible = "renesas,r8a774a1-usb-dmac", + "renesas,usb-dmac"; + reg = <0 0xe65b0000 0 0x100>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1"; + clocks = <&cpg CPG_MOD 331>; + power-domains = <&sysc 32>; + resets = <&cpg 331>; + #dma-cells = <1>; + dma-channels = <2>; + }; + + usb3_phy0: usb-phy@e65ee000 { + compatible = "renesas,r8a774a1-usb3-phy", + "renesas,rcar-gen3-usb3-phy"; + reg = <0 0xe65ee000 0 0x90>; + clocks = <&cpg CPG_MOD 328>, <&usb3s0_clk>, + <&usb_extal_clk>; + clock-names = "usb3-if", "usb3s_clk", "usb_extal"; + power-domains = <&sysc 32>; + resets = <&cpg 328>; + #phy-cells = <0>; + status = "disabled"; + }; + + dmac0: dma-controller@e6700000 { + compatible = "renesas,dmac-r8a774a1", + "renesas,rcar-dmac"; + reg = <0 0xe6700000 0 0x10000>; + interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 219>; + clock-names = "fck"; + power-domains = <&sysc 32>; + resets = <&cpg 219>; + #dma-cells = <1>; + dma-channels = <16>; + }; + + dmac1: dma-controller@e7300000 { + compatible = "renesas,dmac-r8a774a1", + "renesas,rcar-dmac"; + reg = <0 0xe7300000 0 0x10000>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 218>; + clock-names = "fck"; + power-domains = <&sysc 32>; + resets = <&cpg 218>; + #dma-cells = <1>; + dma-channels = <16>; + }; + + dmac2: dma-controller@e7310000 { + compatible = "renesas,dmac-r8a774a1", + "renesas,rcar-dmac"; + reg = <0 0xe7310000 0 0x10000>; + interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 217>; + clock-names = "fck"; + power-domains = <&sysc 32>; + resets = <&cpg 217>; + #dma-cells = <1>; + dma-channels = <16>; + }; + + ipmmu_ds0: mmu@e6740000 { + compatible = "renesas,ipmmu-r8a774a1"; + reg = <0 0xe6740000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 0>; + power-domains = <&sysc 32>; + #iommu-cells = <1>; + }; + + ipmmu_ds1: mmu@e7740000 { + compatible = "renesas,ipmmu-r8a774a1"; + reg = <0 0xe7740000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 1>; + power-domains = <&sysc 32>; + #iommu-cells = <1>; + }; + + ipmmu_hc: mmu@e6570000 { + compatible = "renesas,ipmmu-r8a774a1"; + reg = <0 0xe6570000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 2>; + power-domains = <&sysc 32>; + #iommu-cells = <1>; + }; + + ipmmu_mm: mmu@e67b0000 { + compatible = "renesas,ipmmu-r8a774a1"; + reg = <0 0xe67b0000 0 0x1000>; + interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&sysc 32>; + #iommu-cells = <1>; + }; + + ipmmu_mp: mmu@ec670000 { + compatible = "renesas,ipmmu-r8a774a1"; + reg = <0 0xec670000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 4>; + power-domains = <&sysc 32>; + #iommu-cells = <1>; + }; + + ipmmu_pv0: mmu@fd800000 { + compatible = "renesas,ipmmu-r8a774a1"; + reg = <0 0xfd800000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 5>; + power-domains = <&sysc 32>; + #iommu-cells = <1>; + }; + + ipmmu_pv1: mmu@fd950000 { + compatible = "renesas,ipmmu-r8a774a1"; + reg = <0 0xfd950000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 6>; + power-domains = <&sysc 32>; + #iommu-cells = <1>; + }; + + ipmmu_vc0: mmu@fe6b0000 { + compatible = "renesas,ipmmu-r8a774a1"; + reg = <0 0xfe6b0000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 8>; + power-domains = <&sysc 14>; + #iommu-cells = <1>; + }; + + ipmmu_vi0: mmu@febd0000 { + compatible = "renesas,ipmmu-r8a774a1"; + reg = <0 0xfebd0000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 9>; + power-domains = <&sysc 32>; + #iommu-cells = <1>; + }; + + avb: ethernet@e6800000 { + compatible = "renesas,etheravb-r8a774a1", + "renesas,etheravb-rcar-gen3"; + reg = <0 0xe6800000 0 0x800>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15", + "ch16", "ch17", "ch18", "ch19", + "ch20", "ch21", "ch22", "ch23", + "ch24"; + clocks = <&cpg CPG_MOD 812>; + power-domains = <&sysc 32>; + resets = <&cpg 812>; + phy-mode = "rgmii"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + pwm0: pwm@e6e30000 { + compatible = "renesas,pwm-r8a774a1", "renesas,pwm-rcar"; + reg = <0 0xe6e30000 0 0x8>; + #pwm-cells = <2>; + clocks = <&cpg CPG_MOD 523>; + resets = <&cpg 523>; + power-domains = <&sysc 32>; + status = "disabled"; + }; + + pwm1: pwm@e6e31000 { + compatible = "renesas,pwm-r8a774a1", "renesas,pwm-rcar"; + reg = <0 0xe6e31000 0 0x8>; + #pwm-cells = <2>; + clocks = <&cpg CPG_MOD 523>; + resets = <&cpg 523>; + power-domains = <&sysc 32>; + status = "disabled"; + }; + + pwm2: pwm@e6e32000 { + compatible = "renesas,pwm-r8a774a1", "renesas,pwm-rcar"; + reg = <0 0xe6e32000 0 0x8>; + #pwm-cells = <2>; + clocks = <&cpg CPG_MOD 523>; + resets = <&cpg 523>; + power-domains = <&sysc 32>; + status = "disabled"; + }; + + pwm3: pwm@e6e33000 { + compatible = "renesas,pwm-r8a774a1", "renesas,pwm-rcar"; + reg = <0 0xe6e33000 0 0x8>; + #pwm-cells = <2>; + clocks = <&cpg CPG_MOD 523>; + resets = <&cpg 523>; + power-domains = <&sysc 32>; + status = "disabled"; + }; + + pwm4: pwm@e6e34000 { + compatible = "renesas,pwm-r8a774a1", "renesas,pwm-rcar"; + reg = <0 0xe6e34000 0 0x8>; + #pwm-cells = <2>; + clocks = <&cpg CPG_MOD 523>; + resets = <&cpg 523>; + power-domains = <&sysc 32>; + status = "disabled"; + }; + + pwm5: pwm@e6e35000 { + compatible = "renesas,pwm-r8a774a1", "renesas,pwm-rcar"; + reg = <0 0xe6e35000 0 0x8>; + #pwm-cells = <2>; + clocks = <&cpg CPG_MOD 523>; + resets = <&cpg 523>; + power-domains = <&sysc 32>; + status = "disabled"; + }; + + pwm6: pwm@e6e36000 { + compatible = "renesas,pwm-r8a774a1", "renesas,pwm-rcar"; + reg = <0 0xe6e36000 0 0x8>; + #pwm-cells = <2>; + clocks = <&cpg CPG_MOD 523>; + resets = <&cpg 523>; + power-domains = <&sysc 32>; + status = "disabled"; + }; + + scif0: serial@e6e60000 { + compatible = "renesas,scif-r8a774a1", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6e60000 0 0x40>; + interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 207>, + <&cpg CPG_CORE 19>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x51>, <&dmac1 0x50>, + <&dmac2 0x51>, <&dmac2 0x50>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc 32>; + resets = <&cpg 207>; + status = "disabled"; + }; + + scif1: serial@e6e68000 { + compatible = "renesas,scif-r8a774a1", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6e68000 0 0x40>; + interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 206>, + <&cpg CPG_CORE 19>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x53>, <&dmac1 0x52>, + <&dmac2 0x53>, <&dmac2 0x52>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc 32>; + resets = <&cpg 206>; + status = "disabled"; + }; + + scif2: serial@e6e88000 { + compatible = "renesas,scif-r8a774a1", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6e88000 0 0x40>; + interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 310>, + <&cpg CPG_CORE 19>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + power-domains = <&sysc 32>; + resets = <&cpg 310>; + status = "disabled"; + }; + + scif3: serial@e6c50000 { + compatible = "renesas,scif-r8a774a1", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6c50000 0 0x40>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 204>, + <&cpg CPG_CORE 19>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x57>, <&dmac0 0x56>; + dma-names = "tx", "rx"; + power-domains = <&sysc 32>; + resets = <&cpg 204>; + status = "disabled"; + }; + + scif4: serial@e6c40000 { + compatible = "renesas,scif-r8a774a1", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6c40000 0 0x40>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 203>, + <&cpg CPG_CORE 19>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x59>, <&dmac0 0x58>; + dma-names = "tx", "rx"; + power-domains = <&sysc 32>; + resets = <&cpg 203>; + status = "disabled"; + }; + + scif5: serial@e6f30000 { + compatible = "renesas,scif-r8a774a1", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6f30000 0 0x40>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 202>, + <&cpg CPG_CORE 19>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x5b>, <&dmac1 0x5a>, + <&dmac2 0x5b>, <&dmac2 0x5a>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc 32>; + resets = <&cpg 202>; + status = "disabled"; + }; + + msiof0: spi@e6e90000 { + compatible = "renesas,msiof-r8a774a1", + "renesas,rcar-gen3-msiof"; + reg = <0 0xe6e90000 0 0x0064>; + interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 211>; + dmas = <&dmac1 0x41>, <&dmac1 0x40>, + <&dmac2 0x41>, <&dmac2 0x40>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc 32>; + resets = <&cpg 211>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + msiof1: spi@e6ea0000 { + compatible = "renesas,msiof-r8a774a1", + "renesas,rcar-gen3-msiof"; + reg = <0 0xe6ea0000 0 0x0064>; + interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 210>; + dmas = <&dmac1 0x43>, <&dmac1 0x42>, + <&dmac2 0x43>, <&dmac2 0x42>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc 32>; + resets = <&cpg 210>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + msiof2: spi@e6c00000 { + compatible = "renesas,msiof-r8a774a1", + "renesas,rcar-gen3-msiof"; + reg = <0 0xe6c00000 0 0x0064>; + interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 209>; + dmas = <&dmac0 0x45>, <&dmac0 0x44>; + dma-names = "tx", "rx"; + power-domains = <&sysc 32>; + resets = <&cpg 209>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + msiof3: spi@e6c10000 { + compatible = "renesas,msiof-r8a774a1", + "renesas,rcar-gen3-msiof"; + reg = <0 0xe6c10000 0 0x0064>; + interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 208>; + dmas = <&dmac0 0x47>, <&dmac0 0x46>; + dma-names = "tx", "rx"; + power-domains = <&sysc 32>; + resets = <&cpg 208>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + rcar_sound: sound@ec500000 { + /* + * #sound-dai-cells is required + * + * Single DAI : #sound-dai-cells = <0>; <&rcar_sound>; + * Multi DAI : #sound-dai-cells = <1>; <&rcar_sound N>; + */ + /* + * #clock-cells is required for audio_clkout0/1/2/3 + * + * clkout : #clock-cells = <0>; <&rcar_sound>; + * clkout0/1/2/3: #clock-cells = <1>; <&rcar_sound N>; + */ + compatible = "renesas,rcar_sound-r8a774a1", "renesas,rcar_sound-gen3"; + reg = <0 0xec500000 0 0x1000>, /* SCU */ + <0 0xec5a0000 0 0x100>, /* ADG */ + <0 0xec540000 0 0x1000>, /* SSIU */ + <0 0xec541000 0 0x280>, /* SSI */ + <0 0xec740000 0 0x200>; /* Audio DMAC peri peri*/ + reg-names = "scu", "adg", "ssiu", "ssi", "audmapp"; + + clocks = <&cpg CPG_MOD 1005>, + <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>, + <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>, + <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>, + <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>, + <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>, + <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>, + <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>, + <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>, + <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>, + <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>, + <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, + <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, + <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, + <&audio_clk_a>, <&audio_clk_b>, + <&audio_clk_c>, + <&cpg CPG_CORE 10>; + clock-names = "ssi-all", + "ssi.9", "ssi.8", "ssi.7", "ssi.6", + "ssi.5", "ssi.4", "ssi.3", "ssi.2", + "ssi.1", "ssi.0", + "src.9", "src.8", "src.7", "src.6", + "src.5", "src.4", "src.3", "src.2", + "src.1", "src.0", + "mix.1", "mix.0", + "ctu.1", "ctu.0", + "dvc.0", "dvc.1", + "clk_a", "clk_b", "clk_c", "clk_i"; + power-domains = <&sysc 32>; + resets = <&cpg 1005>, + <&cpg 1006>, <&cpg 1007>, + <&cpg 1008>, <&cpg 1009>, + <&cpg 1010>, <&cpg 1011>, + <&cpg 1012>, <&cpg 1013>, + <&cpg 1014>, <&cpg 1015>; + reset-names = "ssi-all", + "ssi.9", "ssi.8", "ssi.7", "ssi.6", + "ssi.5", "ssi.4", "ssi.3", "ssi.2", + "ssi.1", "ssi.0"; + status = "disabled"; + + rcar_sound,dvc { + dvc0: dvc-0 { + dmas = <&audma1 0xbc>; + dma-names = "tx"; + }; + dvc1: dvc-1 { + dmas = <&audma1 0xbe>; + dma-names = "tx"; + }; + }; + + rcar_sound,mix { + mix0: mix-0 { }; + mix1: mix-1 { }; + }; + + rcar_sound,ctu { + ctu00: ctu-0 { }; + ctu01: ctu-1 { }; + ctu02: ctu-2 { }; + ctu03: ctu-3 { }; + ctu10: ctu-4 { }; + ctu11: ctu-5 { }; + ctu12: ctu-6 { }; + ctu13: ctu-7 { }; + }; + + rcar_sound,src { + src0: src-0 { + interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x85>, <&audma1 0x9a>; + dma-names = "rx", "tx"; + }; + src1: src-1 { + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x87>, <&audma1 0x9c>; + dma-names = "rx", "tx"; + }; + src2: src-2 { + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x89>, <&audma1 0x9e>; + dma-names = "rx", "tx"; + }; + src3: src-3 { + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x8b>, <&audma1 0xa0>; + dma-names = "rx", "tx"; + }; + src4: src-4 { + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x8d>, <&audma1 0xb0>; + dma-names = "rx", "tx"; + }; + src5: src-5 { + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x8f>, <&audma1 0xb2>; + dma-names = "rx", "tx"; + }; + src6: src-6 { + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x91>, <&audma1 0xb4>; + dma-names = "rx", "tx"; + }; + src7: src-7 { + interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x93>, <&audma1 0xb6>; + dma-names = "rx", "tx"; + }; + src8: src-8 { + interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x95>, <&audma1 0xb8>; + dma-names = "rx", "tx"; + }; + src9: src-9 { + interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x97>, <&audma1 0xba>; + dma-names = "rx", "tx"; + }; + }; + + rcar_sound,ssi { + ssi0: ssi-0 { + interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi1: ssi-1 { + interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x03>, <&audma1 0x04>, <&audma0 0x49>, <&audma1 0x4a>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi2: ssi-2 { + interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x05>, <&audma1 0x06>, <&audma0 0x63>, <&audma1 0x64>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi3: ssi-3 { + interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x07>, <&audma1 0x08>, <&audma0 0x6f>, <&audma1 0x70>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi4: ssi-4 { + interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x09>, <&audma1 0x0a>, <&audma0 0x71>, <&audma1 0x72>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi5: ssi-5 { + interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0b>, <&audma1 0x0c>, <&audma0 0x73>, <&audma1 0x74>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi6: ssi-6 { + interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0d>, <&audma1 0x0e>, <&audma0 0x75>, <&audma1 0x76>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi7: ssi-7 { + interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0f>, <&audma1 0x10>, <&audma0 0x79>, <&audma1 0x7a>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi8: ssi-8 { + interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x11>, <&audma1 0x12>, <&audma0 0x7b>, <&audma1 0x7c>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi9: ssi-9 { + interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x13>, <&audma1 0x14>, <&audma0 0x7d>, <&audma1 0x7e>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + }; + port@1 { + reg = <1>; + }; + }; + }; + + audma0: dma-controller@ec700000 { + compatible = "renesas,dmac-r8a774a1", + "renesas,rcar-dmac"; + reg = <0 0xec700000 0 0x10000>; + interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 502>; + clock-names = "fck"; + power-domains = <&sysc 32>; + resets = <&cpg 502>; + #dma-cells = <1>; + dma-channels = <16>; + }; + + audma1: dma-controller@ec720000 { + compatible = "renesas,dmac-r8a774a1", + "renesas,rcar-dmac"; + reg = <0 0xec720000 0 0x10000>; + interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 501>; + clock-names = "fck"; + power-domains = <&sysc 32>; + resets = <&cpg 501>; + #dma-cells = <1>; + dma-channels = <16>; + }; + + xhci0: usb@ee000000 { + compatible = "renesas,xhci-r8a774a1", + "renesas,rcar-gen3-xhci"; + reg = <0 0xee000000 0 0xc00>; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 328>; + power-domains = <&sysc 32>; + resets = <&cpg 328>; + status = "disabled"; + }; + + usb3_peri0: usb@ee020000 { + compatible = "renesas,r8a774a1-usb3-peri", + "renesas,rcar-gen3-usb3-peri"; + reg = <0 0xee020000 0 0x400>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 328>; + power-domains = <&sysc 32>; + resets = <&cpg 328>; + status = "disabled"; + }; + + ohci0: usb@ee080000 { + compatible = "generic-ohci"; + reg = <0 0xee080000 0 0x100>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 703>; + phys = <&usb2_phy0>; + phy-names = "usb"; + power-domains = <&sysc 32>; + resets = <&cpg 703>; + status = "disabled"; + }; + + ohci1: usb@ee0a0000 { + compatible = "generic-ohci"; + reg = <0 0xee0a0000 0 0x100>; + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 702>; + phys = <&usb2_phy1>; + phy-names = "usb"; + power-domains = <&sysc 32>; + resets = <&cpg 702>; + status = "disabled"; + }; + + ehci0: usb@ee080100 { + compatible = "generic-ehci"; + reg = <0 0xee080100 0 0x100>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 703>; + phys = <&usb2_phy0>; + phy-names = "usb"; + companion = <&ohci0>; + power-domains = <&sysc 32>; + resets = <&cpg 703>; + status = "disabled"; + }; + + ehci1: usb@ee0a0100 { + compatible = "generic-ehci"; + reg = <0 0xee0a0100 0 0x100>; + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 702>; + phys = <&usb2_phy1>; + phy-names = "usb"; + companion = <&ohci1>; + power-domains = <&sysc 32>; + resets = <&cpg 702>; + status = "disabled"; + }; + + usb2_phy0: usb-phy@ee080200 { + compatible = "renesas,usb2-phy-r8a774a1", + "renesas,rcar-gen3-usb2-phy"; + reg = <0 0xee080200 0 0x700>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 703>; + power-domains = <&sysc 32>; + resets = <&cpg 703>; + #phy-cells = <0>; + status = "disabled"; + }; + + usb2_phy1: usb-phy@ee0a0200 { + compatible = "renesas,usb2-phy-r8a774a1", + "renesas,rcar-gen3-usb2-phy"; + reg = <0 0xee0a0200 0 0x700>; + clocks = <&cpg CPG_MOD 702>; + power-domains = <&sysc 32>; + resets = <&cpg 702>; + #phy-cells = <0>; + status = "disabled"; + }; + + sdhi0: sd@ee100000 { + compatible = "renesas,sdhi-r8a774a1", + "renesas,rcar-gen3-sdhi"; + reg = <0 0xee100000 0 0x2000>; + interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 314>; + max-frequency = <200000000>; + power-domains = <&sysc 32>; + resets = <&cpg 314>; + status = "disabled"; + }; + + sdhi1: sd@ee120000 { + compatible = "renesas,sdhi-r8a774a1", + "renesas,rcar-gen3-sdhi"; + reg = <0 0xee120000 0 0x2000>; + interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 313>; + max-frequency = <200000000>; + power-domains = <&sysc 32>; + resets = <&cpg 313>; + status = "disabled"; + }; + + sdhi2: sd@ee140000 { + compatible = "renesas,sdhi-r8a774a1", + "renesas,rcar-gen3-sdhi"; + reg = <0 0xee140000 0 0x2000>; + interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 312>; + max-frequency = <200000000>; + power-domains = <&sysc 32>; + resets = <&cpg 312>; + status = "disabled"; + }; + + sdhi3: sd@ee160000 { + compatible = "renesas,sdhi-r8a774a1", + "renesas,rcar-gen3-sdhi"; + reg = <0 0xee160000 0 0x2000>; + interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 311>; + max-frequency = <200000000>; + power-domains = <&sysc 32>; + resets = <&cpg 311>; + status = "disabled"; + }; + + gic: interrupt-controller@f1010000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x0 0xf1010000 0 0x1000>, + <0x0 0xf1020000 0 0x20000>, + <0x0 0xf1040000 0 0x20000>, + <0x0 0xf1060000 0 0x20000>; + interrupts = <GIC_PPI 9 + (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>; + clocks = <&cpg CPG_MOD 408>; + clock-names = "clk"; + power-domains = <&sysc 32>; + resets = <&cpg 408>; + }; + + fcpf0: fcp@fe950000 { + compatible = "renesas,fcpf"; + reg = <0 0xfe950000 0 0x200>; + clocks = <&cpg CPG_MOD 615>; + power-domains = <&sysc 14>; + resets = <&cpg 615>; + }; + + fcpvb0: fcp@fe96f000 { + compatible = "renesas,fcpv"; + reg = <0 0xfe96f000 0 0x200>; + clocks = <&cpg CPG_MOD 607>; + power-domains = <&sysc 14>; + resets = <&cpg 607>; + }; + + fcpvd0: fcp@fea27000 { + compatible = "renesas,fcpv"; + reg = <0 0xfea27000 0 0x200>; + clocks = <&cpg CPG_MOD 603>; + power-domains = <&sysc 32>; + resets = <&cpg 603>; + iommus = <&ipmmu_vi0 8>; + }; + + fcpvd1: fcp@fea2f000 { + compatible = "renesas,fcpv"; + reg = <0 0xfea2f000 0 0x200>; + clocks = <&cpg CPG_MOD 602>; + power-domains = <&sysc 32>; + resets = <&cpg 602>; + iommus = <&ipmmu_vi0 9>; + }; + + fcpvd2: fcp@fea37000 { + compatible = "renesas,fcpv"; + reg = <0 0xfea37000 0 0x200>; + clocks = <&cpg CPG_MOD 601>; + power-domains = <&sysc 32>; + resets = <&cpg 601>; + iommus = <&ipmmu_vi0 10>; + }; + + fcpvi0: fcp@fe9af000 { + compatible = "renesas,fcpv"; + reg = <0 0xfe9af000 0 0x200>; + clocks = <&cpg CPG_MOD 611>; + power-domains = <&sysc 14>; + resets = <&cpg 611>; + iommus = <&ipmmu_vc0 19>; + }; + + prr: chipid@fff00044 { + compatible = "renesas,prr"; + reg = <0 0xfff00044 0 4>; + }; + }; + + thermal-zones { + sensor_thermal1: sensor-thermal1 { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsc 0>; + + trips { + sensor1_crit: sensor1-crit { + temperature = <120000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + sensor_thermal2: sensor-thermal2 { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsc 1>; + + trips { + sensor2_crit: sensor2-crit { + temperature = <120000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + }; + + sensor_thermal3: sensor-thermal3 { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsc 2>; + + trips { + sensor3_crit: sensor3-crit { + temperature = <120000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>; + }; + + /* External USB clocks - can be overridden by the board */ + usb3s0_clk: usb3s0 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + usb_extal_clk: usb_extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; +}; diff --git a/dts/src/arm64/renesas/r8a7795-es1-salvator-x.dts b/dts/src/arm64/renesas/r8a7795-es1-salvator-x.dts index 6b5fa91f1d..0895503b69 100644 --- a/dts/src/arm64/renesas/r8a7795-es1-salvator-x.dts +++ b/dts/src/arm64/renesas/r8a7795-es1-salvator-x.dts @@ -40,12 +40,11 @@ <&cpg CPG_MOD 723>, <&cpg CPG_MOD 722>, <&cpg CPG_MOD 721>, - <&cpg CPG_MOD 727>, <&versaclock5 1>, <&x21_clk>, <&x22_clk>, <&versaclock5 2>; - clock-names = "du.0", "du.1", "du.2", "du.3", "lvds.0", + clock-names = "du.0", "du.1", "du.2", "du.3", "dclkin.0", "dclkin.1", "dclkin.2", "dclkin.3"; }; diff --git a/dts/src/arm64/renesas/r8a7795-es1.dtsi b/dts/src/arm64/renesas/r8a7795-es1.dtsi index 7b2fbaec9a..0fb84c219b 100644 --- a/dts/src/arm64/renesas/r8a7795-es1.dtsi +++ b/dts/src/arm64/renesas/r8a7795-es1.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source for the r8a7795 ES1.x SoC + * Device Tree Source for the R-Car H3 (R8A77950) ES1.x SoC * * Copyright (C) 2015 Renesas Electronics Corp. */ @@ -232,7 +232,7 @@ port@1 { vin0csi21: endpoint@1 { reg = <1>; - remote-endpoint= <&csi21vin0>; + remote-endpoint = <&csi21vin0>; }; }; }; @@ -243,7 +243,7 @@ port@1 { vin1csi21: endpoint@1 { reg = <1>; - remote-endpoint= <&csi21vin1>; + remote-endpoint = <&csi21vin1>; }; }; }; @@ -254,7 +254,7 @@ port@1 { vin2csi21: endpoint@1 { reg = <1>; - remote-endpoint= <&csi21vin2>; + remote-endpoint = <&csi21vin2>; }; }; }; @@ -265,7 +265,7 @@ port@1 { vin3csi21: endpoint@1 { reg = <1>; - remote-endpoint= <&csi21vin3>; + remote-endpoint = <&csi21vin3>; }; }; }; @@ -276,7 +276,7 @@ port@1 { vin4csi21: endpoint@1 { reg = <1>; - remote-endpoint= <&csi21vin4>; + remote-endpoint = <&csi21vin4>; }; }; }; @@ -287,7 +287,7 @@ port@1 { vin5csi21: endpoint@1 { reg = <1>; - remote-endpoint= <&csi21vin5>; + remote-endpoint = <&csi21vin5>; }; }; }; @@ -298,7 +298,7 @@ port@1 { vin6csi21: endpoint@1 { reg = <1>; - remote-endpoint= <&csi21vin6>; + remote-endpoint = <&csi21vin6>; }; }; }; @@ -309,7 +309,7 @@ port@1 { vin7csi21: endpoint@1 { reg = <1>; - remote-endpoint= <&csi21vin7>; + remote-endpoint = <&csi21vin7>; }; }; }; diff --git a/dts/src/arm64/renesas/r8a7795-h3ulcb.dts b/dts/src/arm64/renesas/r8a7795-h3ulcb.dts index df50bf4640..54515eaf03 100644 --- a/dts/src/arm64/renesas/r8a7795-h3ulcb.dts +++ b/dts/src/arm64/renesas/r8a7795-h3ulcb.dts @@ -41,11 +41,10 @@ <&cpg CPG_MOD 723>, <&cpg CPG_MOD 722>, <&cpg CPG_MOD 721>, - <&cpg CPG_MOD 727>, <&versaclock5 1>, <&versaclock5 3>, <&versaclock5 4>, <&versaclock5 2>; - clock-names = "du.0", "du.1", "du.2", "du.3", "lvds.0", + clock-names = "du.0", "du.1", "du.2", "du.3", "dclkin.0", "dclkin.1", "dclkin.2", "dclkin.3"; }; diff --git a/dts/src/arm64/renesas/r8a7795-salvator-x.dts b/dts/src/arm64/renesas/r8a7795-salvator-x.dts index 446822f575..1620e8d8da 100644 --- a/dts/src/arm64/renesas/r8a7795-salvator-x.dts +++ b/dts/src/arm64/renesas/r8a7795-salvator-x.dts @@ -40,12 +40,11 @@ <&cpg CPG_MOD 723>, <&cpg CPG_MOD 722>, <&cpg CPG_MOD 721>, - <&cpg CPG_MOD 727>, <&versaclock5 1>, <&x21_clk>, <&x22_clk>, <&versaclock5 2>; - clock-names = "du.0", "du.1", "du.2", "du.3", "lvds.0", + clock-names = "du.0", "du.1", "du.2", "du.3", "dclkin.0", "dclkin.1", "dclkin.2", "dclkin.3"; }; diff --git a/dts/src/arm64/renesas/r8a7795-salvator-xs.dts b/dts/src/arm64/renesas/r8a7795-salvator-xs.dts index 8ded64d0a4..cf08a119ee 100644 --- a/dts/src/arm64/renesas/r8a7795-salvator-xs.dts +++ b/dts/src/arm64/renesas/r8a7795-salvator-xs.dts @@ -40,12 +40,11 @@ <&cpg CPG_MOD 723>, <&cpg CPG_MOD 722>, <&cpg CPG_MOD 721>, - <&cpg CPG_MOD 727>, <&versaclock6 1>, <&x21_clk>, <&x22_clk>, <&versaclock6 2>; - clock-names = "du.0", "du.1", "du.2", "du.3", "lvds.0", + clock-names = "du.0", "du.1", "du.2", "du.3", "dclkin.0", "dclkin.1", "dclkin.2", "dclkin.3"; }; @@ -152,6 +151,15 @@ }; }; +&pca9654 { + pcie_sata_switch { + gpio-hog; + gpios = <7 GPIO_ACTIVE_HIGH>; + output-low; /* enable SATA by default */ + line-name = "PCIE/SATA switch"; + }; +}; + &pfc { usb2_pins: usb2 { groups = "usb2"; @@ -176,6 +184,11 @@ }; }; +/* SW12-7 must be set 'Off' (MD12 set to 1) which is not the default! */ +&sata { + status = "okay"; +}; + &usb2_phy2 { pinctrl-0 = <&usb2_pins>; pinctrl-names = "default"; diff --git a/dts/src/arm64/renesas/r8a7795.dtsi b/dts/src/arm64/renesas/r8a7795.dtsi index fb9d08ad76..b5f2273cac 100644 --- a/dts/src/arm64/renesas/r8a7795.dtsi +++ b/dts/src/arm64/renesas/r8a7795.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source for the r8a7795 SoC + * Device Tree Source for the R-Car H3 (R8A77950) SoC * * Copyright (C) 2015 Renesas Electronics Corp. */ @@ -123,7 +123,7 @@ power-domains = <&sysc R8A7795_PD_CA57_CPU0>; next-level-cache = <&L2_CA57>; enable-method = "psci"; - clocks =<&cpg CPG_CORE R8A7795_CLK_Z>; + clocks = <&cpg CPG_CORE R8A7795_CLK_Z>; operating-points-v2 = <&cluster0_opp>; #cooling-cells = <2>; }; @@ -135,7 +135,7 @@ power-domains = <&sysc R8A7795_PD_CA57_CPU1>; next-level-cache = <&L2_CA57>; enable-method = "psci"; - clocks =<&cpg CPG_CORE R8A7795_CLK_Z>; + clocks = <&cpg CPG_CORE R8A7795_CLK_Z>; operating-points-v2 = <&cluster0_opp>; #cooling-cells = <2>; }; @@ -147,7 +147,7 @@ power-domains = <&sysc R8A7795_PD_CA57_CPU2>; next-level-cache = <&L2_CA57>; enable-method = "psci"; - clocks =<&cpg CPG_CORE R8A7795_CLK_Z>; + clocks = <&cpg CPG_CORE R8A7795_CLK_Z>; operating-points-v2 = <&cluster0_opp>; #cooling-cells = <2>; }; @@ -159,7 +159,7 @@ power-domains = <&sysc R8A7795_PD_CA57_CPU3>; next-level-cache = <&L2_CA57>; enable-method = "psci"; - clocks =<&cpg CPG_CORE R8A7795_CLK_Z>; + clocks = <&cpg CPG_CORE R8A7795_CLK_Z>; operating-points-v2 = <&cluster0_opp>; #cooling-cells = <2>; }; @@ -171,7 +171,7 @@ power-domains = <&sysc R8A7795_PD_CA53_CPU0>; next-level-cache = <&L2_CA53>; enable-method = "psci"; - clocks =<&cpg CPG_CORE R8A7795_CLK_Z2>; + clocks = <&cpg CPG_CORE R8A7795_CLK_Z2>; operating-points-v2 = <&cluster1_opp>; }; @@ -182,7 +182,7 @@ power-domains = <&sysc R8A7795_PD_CA53_CPU1>; next-level-cache = <&L2_CA53>; enable-method = "psci"; - clocks =<&cpg CPG_CORE R8A7795_CLK_Z2>; + clocks = <&cpg CPG_CORE R8A7795_CLK_Z2>; operating-points-v2 = <&cluster1_opp>; }; @@ -193,7 +193,7 @@ power-domains = <&sysc R8A7795_PD_CA53_CPU2>; next-level-cache = <&L2_CA53>; enable-method = "psci"; - clocks =<&cpg CPG_CORE R8A7795_CLK_Z2>; + clocks = <&cpg CPG_CORE R8A7795_CLK_Z2>; operating-points-v2 = <&cluster1_opp>; }; @@ -204,7 +204,7 @@ power-domains = <&sysc R8A7795_PD_CA53_CPU3>; next-level-cache = <&L2_CA53>; enable-method = "psci"; - clocks =<&cpg CPG_CORE R8A7795_CLK_Z2>; + clocks = <&cpg CPG_CORE R8A7795_CLK_Z2>; operating-points-v2 = <&cluster1_opp>; }; @@ -455,7 +455,6 @@ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 522>; #thermal-sensor-cells = <1>; - status = "okay"; }; intc_ex: interrupt-controller@e61c0000 { @@ -525,15 +524,6 @@ status = "disabled"; }; - arm_cc630p: crypto@e6601000 { - compatible = "arm,cryptocell-630p-ree"; - interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0 0xe6601000 0 0x1000>; - clocks = <&cpg CPG_MOD 229>; - resets = <&cpg 229>; - power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; - }; - i2c3: i2c@e66d0000 { #address-cells = <1>; #size-cells = <0>; @@ -707,7 +697,7 @@ "renesas,rcar-gen3-usbhs"; reg = <0 0xe6590000 0 0x100>; interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 704>; + clocks = <&cpg CPG_MOD 704>, <&cpg CPG_MOD 703>; dmas = <&usb_dmac0 0>, <&usb_dmac0 1>, <&usb_dmac1 0>, <&usb_dmac1 1>; dma-names = "ch0", "ch1", "ch2", "ch3"; @@ -715,7 +705,7 @@ phys = <&usb2_phy0>; phy-names = "usb"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; - resets = <&cpg 704>; + resets = <&cpg 704>, <&cpg 703>; status = "disabled"; }; @@ -724,7 +714,7 @@ "renesas,rcar-gen3-usbhs"; reg = <0 0xe659c000 0 0x100>; interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 705>; + clocks = <&cpg CPG_MOD 705>, <&cpg CPG_MOD 700>; dmas = <&usb_dmac2 0>, <&usb_dmac2 1>, <&usb_dmac3 0>, <&usb_dmac3 1>; dma-names = "ch0", "ch1", "ch2", "ch3"; @@ -732,7 +722,7 @@ phys = <&usb2_phy3>; phy-names = "usb"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; - resets = <&cpg 705>; + resets = <&cpg 705>, <&cpg 700>; status = "disabled"; }; @@ -805,6 +795,15 @@ status = "disabled"; }; + arm_cc630p: crypto@e6601000 { + compatible = "arm,cryptocell-630p-ree"; + interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0xe6601000 0 0x1000>; + clocks = <&cpg CPG_MOD 229>; + resets = <&cpg 229>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + }; + dmac0: dma-controller@e6700000 { compatible = "renesas,dmac-r8a7795", "renesas,rcar-dmac"; @@ -1425,11 +1424,11 @@ vin0csi20: endpoint@0 { reg = <0>; - remote-endpoint= <&csi20vin0>; + remote-endpoint = <&csi20vin0>; }; vin0csi40: endpoint@2 { reg = <2>; - remote-endpoint= <&csi40vin0>; + remote-endpoint = <&csi40vin0>; }; }; }; @@ -1457,11 +1456,11 @@ vin1csi20: endpoint@0 { reg = <0>; - remote-endpoint= <&csi20vin1>; + remote-endpoint = <&csi20vin1>; }; vin1csi40: endpoint@2 { reg = <2>; - remote-endpoint= <&csi40vin1>; + remote-endpoint = <&csi40vin1>; }; }; }; @@ -1489,11 +1488,11 @@ vin2csi20: endpoint@0 { reg = <0>; - remote-endpoint= <&csi20vin2>; + remote-endpoint = <&csi20vin2>; }; vin2csi40: endpoint@2 { reg = <2>; - remote-endpoint= <&csi40vin2>; + remote-endpoint = <&csi40vin2>; }; }; }; @@ -1521,11 +1520,11 @@ vin3csi20: endpoint@0 { reg = <0>; - remote-endpoint= <&csi20vin3>; + remote-endpoint = <&csi20vin3>; }; vin3csi40: endpoint@2 { reg = <2>; - remote-endpoint= <&csi40vin3>; + remote-endpoint = <&csi40vin3>; }; }; }; @@ -1553,11 +1552,11 @@ vin4csi20: endpoint@0 { reg = <0>; - remote-endpoint= <&csi20vin4>; + remote-endpoint = <&csi20vin4>; }; vin4csi41: endpoint@3 { reg = <3>; - remote-endpoint= <&csi41vin4>; + remote-endpoint = <&csi41vin4>; }; }; }; @@ -1585,11 +1584,11 @@ vin5csi20: endpoint@0 { reg = <0>; - remote-endpoint= <&csi20vin5>; + remote-endpoint = <&csi20vin5>; }; vin5csi41: endpoint@3 { reg = <3>; - remote-endpoint= <&csi41vin5>; + remote-endpoint = <&csi41vin5>; }; }; }; @@ -1617,11 +1616,11 @@ vin6csi20: endpoint@0 { reg = <0>; - remote-endpoint= <&csi20vin6>; + remote-endpoint = <&csi20vin6>; }; vin6csi41: endpoint@3 { reg = <3>; - remote-endpoint= <&csi41vin6>; + remote-endpoint = <&csi41vin6>; }; }; }; @@ -1649,11 +1648,11 @@ vin7csi20: endpoint@0 { reg = <0>; - remote-endpoint= <&csi20vin7>; + remote-endpoint = <&csi20vin7>; }; vin7csi41: endpoint@3 { reg = <3>; - remote-endpoint= <&csi41vin7>; + remote-endpoint = <&csi41vin7>; }; }; }; @@ -2098,11 +2097,11 @@ compatible = "generic-ohci"; reg = <0 0xee080000 0 0x100>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 703>; + clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; phys = <&usb2_phy0>; phy-names = "usb"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; - resets = <&cpg 703>; + resets = <&cpg 703>, <&cpg 704>; status = "disabled"; }; @@ -2134,11 +2133,11 @@ compatible = "generic-ohci"; reg = <0 0xee0e0000 0 0x100>; interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 700>; + clocks = <&cpg CPG_MOD 700>, <&cpg CPG_MOD 705>; phys = <&usb2_phy3>; phy-names = "usb"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; - resets = <&cpg 700>; + resets = <&cpg 700>, <&cpg 705>; status = "disabled"; }; @@ -2146,12 +2145,12 @@ compatible = "generic-ehci"; reg = <0 0xee080100 0 0x100>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 703>; + clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; phys = <&usb2_phy0>; phy-names = "usb"; companion = <&ohci0>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; - resets = <&cpg 703>; + resets = <&cpg 703>, <&cpg 704>; status = "disabled"; }; @@ -2185,12 +2184,12 @@ compatible = "generic-ehci"; reg = <0 0xee0e0100 0 0x100>; interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 700>; + clocks = <&cpg CPG_MOD 700>, <&cpg CPG_MOD 705>; phys = <&usb2_phy3>; phy-names = "usb"; companion = <&ohci3>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; - resets = <&cpg 700>; + resets = <&cpg 700>, <&cpg 705>; status = "disabled"; }; @@ -2199,9 +2198,9 @@ "renesas,rcar-gen3-usb2-phy"; reg = <0 0xee080200 0 0x700>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 703>; + clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; - resets = <&cpg 703>; + resets = <&cpg 703>, <&cpg 704>; #phy-cells = <0>; status = "disabled"; }; @@ -2233,9 +2232,9 @@ "renesas,rcar-gen3-usb2-phy"; reg = <0 0xee0e0200 0 0x700>; interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 700>; + clocks = <&cpg CPG_MOD 700>, <&cpg CPG_MOD 705>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; - resets = <&cpg 700>; + resets = <&cpg 700>, <&cpg 705>; #phy-cells = <0>; status = "disabled"; }; @@ -2782,9 +2781,7 @@ du: display@feb00000 { compatible = "renesas,du-r8a7795"; - reg = <0 0xfeb00000 0 0x80000>, - <0 0xfeb90000 0 0x14>; - reg-names = "du", "lvds.0"; + reg = <0 0xfeb00000 0 0x80000>; interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>, @@ -2792,9 +2789,8 @@ clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&cpg CPG_MOD 722>, - <&cpg CPG_MOD 721>, - <&cpg CPG_MOD 727>; - clock-names = "du.0", "du.1", "du.2", "du.3", "lvds.0"; + <&cpg CPG_MOD 721>; + clock-names = "du.0", "du.1", "du.2", "du.3"; vsps = <&vspd0 0 &vspd1 0 &vspd2 0 &vspd0 1>; status = "disabled"; @@ -2822,6 +2818,33 @@ port@3 { reg = <3>; du_out_lvds0: endpoint { + remote-endpoint = <&lvds0_in>; + }; + }; + }; + }; + + lvds0: lvds@feb90000 { + compatible = "renesas,r8a7795-lvds"; + reg = <0 0xfeb90000 0 0x14>; + clocks = <&cpg CPG_MOD 727>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 727>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + lvds0_in: endpoint { + remote-endpoint = <&du_out_lvds0>; + }; + }; + port@1 { + reg = <1>; + lvds0_out: endpoint { }; }; }; diff --git a/dts/src/arm64/renesas/r8a7796-m3ulcb.dts b/dts/src/arm64/renesas/r8a7796-m3ulcb.dts index cbd8acbf53..9e4594c27f 100644 --- a/dts/src/arm64/renesas/r8a7796-m3ulcb.dts +++ b/dts/src/arm64/renesas/r8a7796-m3ulcb.dts @@ -30,10 +30,9 @@ clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&cpg CPG_MOD 722>, - <&cpg CPG_MOD 727>, <&versaclock5 1>, <&versaclock5 3>, <&versaclock5 2>; - clock-names = "du.0", "du.1", "du.2", "lvds.0", + clock-names = "du.0", "du.1", "du.2", "dclkin.0", "dclkin.1", "dclkin.2"; }; diff --git a/dts/src/arm64/renesas/r8a7796-salvator-x.dts b/dts/src/arm64/renesas/r8a7796-salvator-x.dts index 052d72acc8..b4f9567cb9 100644 --- a/dts/src/arm64/renesas/r8a7796-salvator-x.dts +++ b/dts/src/arm64/renesas/r8a7796-salvator-x.dts @@ -29,11 +29,10 @@ clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&cpg CPG_MOD 722>, - <&cpg CPG_MOD 727>, <&versaclock5 1>, <&x21_clk>, <&versaclock5 2>; - clock-names = "du.0", "du.1", "du.2", "lvds.0", + clock-names = "du.0", "du.1", "du.2", "dclkin.0", "dclkin.1", "dclkin.2"; }; diff --git a/dts/src/arm64/renesas/r8a7796.dtsi b/dts/src/arm64/renesas/r8a7796.dtsi index cbd35c00b4..1ec6aaa520 100644 --- a/dts/src/arm64/renesas/r8a7796.dtsi +++ b/dts/src/arm64/renesas/r8a7796.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source for the r8a7796 SoC + * Device Tree Source for the R-Car M3-W (R8A77960) SoC * * Copyright (C) 2016-2017 Renesas Electronics Corp. */ @@ -134,7 +134,7 @@ power-domains = <&sysc R8A7796_PD_CA57_CPU0>; next-level-cache = <&L2_CA57>; enable-method = "psci"; - clocks =<&cpg CPG_CORE R8A7796_CLK_Z>; + clocks = <&cpg CPG_CORE R8A7796_CLK_Z>; operating-points-v2 = <&cluster0_opp>; #cooling-cells = <2>; }; @@ -146,7 +146,7 @@ power-domains = <&sysc R8A7796_PD_CA57_CPU1>; next-level-cache = <&L2_CA57>; enable-method = "psci"; - clocks =<&cpg CPG_CORE R8A7796_CLK_Z>; + clocks = <&cpg CPG_CORE R8A7796_CLK_Z>; operating-points-v2 = <&cluster0_opp>; #cooling-cells = <2>; }; @@ -158,7 +158,7 @@ power-domains = <&sysc R8A7796_PD_CA53_CPU0>; next-level-cache = <&L2_CA53>; enable-method = "psci"; - clocks =<&cpg CPG_CORE R8A7796_CLK_Z2>; + clocks = <&cpg CPG_CORE R8A7796_CLK_Z2>; operating-points-v2 = <&cluster1_opp>; }; @@ -169,7 +169,7 @@ power-domains = <&sysc R8A7796_PD_CA53_CPU1>; next-level-cache = <&L2_CA53>; enable-method = "psci"; - clocks =<&cpg CPG_CORE R8A7796_CLK_Z2>; + clocks = <&cpg CPG_CORE R8A7796_CLK_Z2>; operating-points-v2 = <&cluster1_opp>; }; @@ -180,7 +180,7 @@ power-domains = <&sysc R8A7796_PD_CA53_CPU2>; next-level-cache = <&L2_CA53>; enable-method = "psci"; - clocks =<&cpg CPG_CORE R8A7796_CLK_Z2>; + clocks = <&cpg CPG_CORE R8A7796_CLK_Z2>; operating-points-v2 = <&cluster1_opp>; }; @@ -191,7 +191,7 @@ power-domains = <&sysc R8A7796_PD_CA53_CPU3>; next-level-cache = <&L2_CA53>; enable-method = "psci"; - clocks =<&cpg CPG_CORE R8A7796_CLK_Z2>; + clocks = <&cpg CPG_CORE R8A7796_CLK_Z2>; operating-points-v2 = <&cluster1_opp>; }; @@ -434,7 +434,6 @@ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; resets = <&cpg 522>; #thermal-sensor-cells = <1>; - status = "okay"; }; intc_ex: interrupt-controller@e61c0000 { @@ -677,7 +676,7 @@ "renesas,rcar-gen3-usbhs"; reg = <0 0xe6590000 0 0x100>; interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 704>; + clocks = <&cpg CPG_MOD 704>, <&cpg CPG_MOD 703>; dmas = <&usb_dmac0 0>, <&usb_dmac0 1>, <&usb_dmac1 0>, <&usb_dmac1 1>; dma-names = "ch0", "ch1", "ch2", "ch3"; @@ -685,7 +684,7 @@ phys = <&usb2_phy0>; phy-names = "usb"; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; - resets = <&cpg 704>; + resets = <&cpg 704>, <&cpg 703>; status = "disabled"; }; @@ -1299,11 +1298,11 @@ vin0csi20: endpoint@0 { reg = <0>; - remote-endpoint= <&csi20vin0>; + remote-endpoint = <&csi20vin0>; }; vin0csi40: endpoint@2 { reg = <2>; - remote-endpoint= <&csi40vin0>; + remote-endpoint = <&csi40vin0>; }; }; }; @@ -1331,11 +1330,11 @@ vin1csi20: endpoint@0 { reg = <0>; - remote-endpoint= <&csi20vin1>; + remote-endpoint = <&csi20vin1>; }; vin1csi40: endpoint@2 { reg = <2>; - remote-endpoint= <&csi40vin1>; + remote-endpoint = <&csi40vin1>; }; }; }; @@ -1363,11 +1362,11 @@ vin2csi20: endpoint@0 { reg = <0>; - remote-endpoint= <&csi20vin2>; + remote-endpoint = <&csi20vin2>; }; vin2csi40: endpoint@2 { reg = <2>; - remote-endpoint= <&csi40vin2>; + remote-endpoint = <&csi40vin2>; }; }; }; @@ -1395,11 +1394,11 @@ vin3csi20: endpoint@0 { reg = <0>; - remote-endpoint= <&csi20vin3>; + remote-endpoint = <&csi20vin3>; }; vin3csi40: endpoint@2 { reg = <2>; - remote-endpoint= <&csi40vin3>; + remote-endpoint = <&csi40vin3>; }; }; }; @@ -1427,11 +1426,11 @@ vin4csi20: endpoint@0 { reg = <0>; - remote-endpoint= <&csi20vin4>; + remote-endpoint = <&csi20vin4>; }; vin4csi40: endpoint@2 { reg = <2>; - remote-endpoint= <&csi40vin4>; + remote-endpoint = <&csi40vin4>; }; }; }; @@ -1459,11 +1458,11 @@ vin5csi20: endpoint@0 { reg = <0>; - remote-endpoint= <&csi20vin5>; + remote-endpoint = <&csi20vin5>; }; vin5csi40: endpoint@2 { reg = <2>; - remote-endpoint= <&csi40vin5>; + remote-endpoint = <&csi40vin5>; }; }; }; @@ -1491,11 +1490,11 @@ vin6csi20: endpoint@0 { reg = <0>; - remote-endpoint= <&csi20vin6>; + remote-endpoint = <&csi20vin6>; }; vin6csi40: endpoint@2 { reg = <2>; - remote-endpoint= <&csi40vin6>; + remote-endpoint = <&csi40vin6>; }; }; }; @@ -1523,11 +1522,11 @@ vin7csi20: endpoint@0 { reg = <0>; - remote-endpoint= <&csi20vin7>; + remote-endpoint = <&csi20vin7>; }; vin7csi40: endpoint@2 { reg = <2>; - remote-endpoint= <&csi40vin7>; + remote-endpoint = <&csi40vin7>; }; }; }; @@ -1970,11 +1969,11 @@ compatible = "generic-ohci"; reg = <0 0xee080000 0 0x100>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 703>; + clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; phys = <&usb2_phy0>; phy-names = "usb"; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; - resets = <&cpg 703>; + resets = <&cpg 703>, <&cpg 704>; status = "disabled"; }; @@ -1994,12 +1993,12 @@ compatible = "generic-ehci"; reg = <0 0xee080100 0 0x100>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 703>; + clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; phys = <&usb2_phy0>; phy-names = "usb"; - companion= <&ohci0>; + companion = <&ohci0>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; - resets = <&cpg 703>; + resets = <&cpg 703>, <&cpg 704>; status = "disabled"; }; @@ -2010,7 +2009,7 @@ clocks = <&cpg CPG_MOD 702>; phys = <&usb2_phy1>; phy-names = "usb"; - companion= <&ohci1>; + companion = <&ohci1>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; resets = <&cpg 702>; status = "disabled"; @@ -2021,9 +2020,9 @@ "renesas,rcar-gen3-usb2-phy"; reg = <0 0xee080200 0 0x700>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 703>; + clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; - resets = <&cpg 703>; + resets = <&cpg 703>, <&cpg 704>; #phy-cells = <0>; status = "disabled"; }; @@ -2437,17 +2436,14 @@ du: display@feb00000 { compatible = "renesas,du-r8a7796"; - reg = <0 0xfeb00000 0 0x70000>, - <0 0xfeb90000 0 0x14>; - reg-names = "du", "lvds.0"; + reg = <0 0xfeb00000 0 0x70000>; interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, - <&cpg CPG_MOD 722>, - <&cpg CPG_MOD 727>; - clock-names = "du.0", "du.1", "du.2", "lvds.0"; + <&cpg CPG_MOD 722>; + clock-names = "du.0", "du.1", "du.2"; status = "disabled"; vsps = <&vspd0 &vspd1 &vspd2>; @@ -2470,6 +2466,33 @@ port@2 { reg = <2>; du_out_lvds0: endpoint { + remote-endpoint = <&lvds0_in>; + }; + }; + }; + }; + + lvds0: lvds@feb90000 { + compatible = "renesas,r8a7796-lvds"; + reg = <0 0xfeb90000 0 0x14>; + clocks = <&cpg CPG_MOD 727>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 727>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + lvds0_in: endpoint { + remote-endpoint = <&du_out_lvds0>; + }; + }; + port@1 { + reg = <1>; + lvds0_out: endpoint { }; }; }; diff --git a/dts/src/arm64/renesas/r8a77965-m3nulcb-kf.dts b/dts/src/arm64/renesas/r8a77965-m3nulcb-kf.dts new file mode 100644 index 0000000000..dadad97051 --- /dev/null +++ b/dts/src/arm64/renesas/r8a77965-m3nulcb-kf.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the M3NULCB Kingfisher board + * + * Copyright (C) 2018 Renesas Electronics Corp. + * Copyright (C) 2018 Cogent Embedded, Inc. + */ + +#include "r8a77965-m3nulcb.dts" +#include "ulcb-kf.dtsi" + +/ { + model = "Renesas M3NULCB Kingfisher board based on r8a77965"; + compatible = "shimafuji,kingfisher", "renesas,m3nulcb", + "renesas,r8a77965"; +}; diff --git a/dts/src/arm64/renesas/r8a77965-m3nulcb.dts b/dts/src/arm64/renesas/r8a77965-m3nulcb.dts new file mode 100644 index 0000000000..964078b6cc --- /dev/null +++ b/dts/src/arm64/renesas/r8a77965-m3nulcb.dts @@ -0,0 +1,33 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the M3NULCB (R-Car Starter Kit Pro) board + * + * Copyright (C) 2018 Renesas Electronics Corp. + * Copyright (C) 2018 Cogent Embedded, Inc. + */ + +/dts-v1/; +#include "r8a77965.dtsi" +#include "ulcb.dtsi" + +/ { + model = "Renesas M3NULCB board based on r8a77965"; + compatible = "renesas,m3nulcb", "renesas,r8a77965"; + + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0x0 0x48000000 0x0 0x78000000>; + }; +}; + +&du { + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>, + <&cpg CPG_MOD 721>, + <&versaclock5 1>, + <&versaclock5 3>, + <&versaclock5 2>; + clock-names = "du.0", "du.1", "du.3", + "dclkin.0", "dclkin.1", "dclkin.3"; +}; diff --git a/dts/src/arm64/renesas/r8a77965-salvator-xs.dts b/dts/src/arm64/renesas/r8a77965-salvator-xs.dts index 9de4e3db16..f03a5e9e0c 100644 --- a/dts/src/arm64/renesas/r8a77965-salvator-xs.dts +++ b/dts/src/arm64/renesas/r8a77965-salvator-xs.dts @@ -47,3 +47,17 @@ &hdmi0_con { remote-endpoint = <&rcar_dw_hdmi0_out>; }; + +&pca9654 { + pcie_sata_switch { + gpio-hog; + gpios = <7 GPIO_ACTIVE_HIGH>; + output-low; /* enable SATA by default */ + line-name = "PCIE/SATA switch"; + }; +}; + +/* SW12-7 must be set 'Off' (MD12 set to 1) which is not the default! */ +&sata { + status = "okay"; +}; diff --git a/dts/src/arm64/renesas/r8a77965.dtsi b/dts/src/arm64/renesas/r8a77965.dtsi index 0cd44461a0..83946ca2eb 100644 --- a/dts/src/arm64/renesas/r8a77965.dtsi +++ b/dts/src/arm64/renesas/r8a77965.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source for the r8a77965 SoC + * Device Tree Source for the R-Car M3-N (R8A77965) SoC * * Copyright (C) 2018 Jacopo Mondi <jacopo+renesas@jmondi.org> * @@ -12,7 +12,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/power/r8a77965-sysc.h> -#define CPG_AUDIO_CLK_I 10 +#define CPG_AUDIO_CLK_I R8A77965_CLK_S0D4 / { compatible = "renesas,r8a77965"; @@ -60,6 +60,46 @@ clock-frequency = <0>; }; + cluster0_opp: opp_table0 { + compatible = "operating-points-v2"; + opp-shared; + + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <830000>; + clock-latency-ns = <300000>; + }; + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <830000>; + clock-latency-ns = <300000>; + }; + opp-1500000000 { + opp-hz = /bits/ 64 <1500000000>; + opp-microvolt = <830000>; + clock-latency-ns = <300000>; + opp-suspend; + }; + opp-1600000000 { + opp-hz = /bits/ 64 <1600000000>; + opp-microvolt = <900000>; + clock-latency-ns = <300000>; + turbo-mode; + }; + opp-1700000000 { + opp-hz = /bits/ 64 <1700000000>; + opp-microvolt = <900000>; + clock-latency-ns = <300000>; + turbo-mode; + }; + opp-1800000000 { + opp-hz = /bits/ 64 <1800000000>; + opp-microvolt = <960000>; + clock-latency-ns = <300000>; + turbo-mode; + }; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -71,6 +111,8 @@ power-domains = <&sysc R8A77965_PD_CA57_CPU0>; next-level-cache = <&L2_CA57>; enable-method = "psci"; + clocks = <&cpg CPG_CORE R8A77965_CLK_Z>; + operating-points-v2 = <&cluster0_opp>; }; a57_1: cpu@1 { @@ -80,6 +122,8 @@ power-domains = <&sysc R8A77965_PD_CA57_CPU1>; next-level-cache = <&L2_CA57>; enable-method = "psci"; + clocks = <&cpg CPG_CORE R8A77965_CLK_Z>; + operating-points-v2 = <&cluster0_opp>; }; L2_CA57: cache-controller-0 { @@ -306,7 +350,6 @@ power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; resets = <&cpg 522>; #thermal-sensor-cells = <1>; - status = "okay"; }; intc_ex: interrupt-controller@e61c0000 { @@ -545,11 +588,11 @@ }; hsusb: usb@e6590000 { - compatible = "renesas,usbhs-r8a7796", + compatible = "renesas,usbhs-r8a77965", "renesas,rcar-gen3-usbhs"; reg = <0 0xe6590000 0 0x100>; interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 704>; + clocks = <&cpg CPG_MOD 704>, <&cpg CPG_MOD 703>; dmas = <&usb_dmac0 0>, <&usb_dmac0 1>, <&usb_dmac1 0>, <&usb_dmac1 1>; dma-names = "ch0", "ch1", "ch2", "ch3"; @@ -557,7 +600,7 @@ phys = <&usb2_phy0>; phy-names = "usb"; power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; - resets = <&cpg 704>; + resets = <&cpg 704>, <&cpg 703>; status = "disabled"; }; @@ -634,6 +677,14 @@ resets = <&cpg 219>; #dma-cells = <1>; dma-channels = <16>; + iommus = <&ipmmu_ds0 0>, <&ipmmu_ds0 1>, + <&ipmmu_ds0 2>, <&ipmmu_ds0 3>, + <&ipmmu_ds0 4>, <&ipmmu_ds0 5>, + <&ipmmu_ds0 6>, <&ipmmu_ds0 7>, + <&ipmmu_ds0 8>, <&ipmmu_ds0 9>, + <&ipmmu_ds0 10>, <&ipmmu_ds0 11>, + <&ipmmu_ds0 12>, <&ipmmu_ds0 13>, + <&ipmmu_ds0 14>, <&ipmmu_ds0 15>; }; dmac1: dma-controller@e7300000 { @@ -668,6 +719,14 @@ resets = <&cpg 218>; #dma-cells = <1>; dma-channels = <16>; + iommus = <&ipmmu_ds1 0>, <&ipmmu_ds1 1>, + <&ipmmu_ds1 2>, <&ipmmu_ds1 3>, + <&ipmmu_ds1 4>, <&ipmmu_ds1 5>, + <&ipmmu_ds1 6>, <&ipmmu_ds1 7>, + <&ipmmu_ds1 8>, <&ipmmu_ds1 9>, + <&ipmmu_ds1 10>, <&ipmmu_ds1 11>, + <&ipmmu_ds1 12>, <&ipmmu_ds1 13>, + <&ipmmu_ds1 14>, <&ipmmu_ds1 15>; }; dmac2: dma-controller@e7310000 { @@ -702,6 +761,14 @@ resets = <&cpg 217>; #dma-cells = <1>; dma-channels = <16>; + iommus = <&ipmmu_ds1 16>, <&ipmmu_ds1 17>, + <&ipmmu_ds1 18>, <&ipmmu_ds1 19>, + <&ipmmu_ds1 20>, <&ipmmu_ds1 21>, + <&ipmmu_ds1 22>, <&ipmmu_ds1 23>, + <&ipmmu_ds1 24>, <&ipmmu_ds1 25>, + <&ipmmu_ds1 26>, <&ipmmu_ds1 27>, + <&ipmmu_ds1 28>, <&ipmmu_ds1 29>, + <&ipmmu_ds1 30>, <&ipmmu_ds1 31>; }; ipmmu_ds0: mmu@e6740000 { @@ -838,6 +905,16 @@ status = "disabled"; }; + can0: can@e6c30000 { + reg = <0 0xe6c30000 0 0x1000>; + /* placeholder */ + }; + + can1: can@e6c38000 { + reg = <0 0xe6c38000 0 0x1000>; + /* placeholder */ + }; + pwm0: pwm@e6e30000 { compatible = "renesas,pwm-r8a77965", "renesas,pwm-rcar"; reg = <0 0xe6e30000 0 8>; @@ -1089,11 +1166,11 @@ vin0csi20: endpoint@0 { reg = <0>; - remote-endpoint= <&csi20vin0>; + remote-endpoint = <&csi20vin0>; }; vin0csi40: endpoint@2 { reg = <2>; - remote-endpoint= <&csi40vin0>; + remote-endpoint = <&csi40vin0>; }; }; }; @@ -1121,11 +1198,11 @@ vin1csi20: endpoint@0 { reg = <0>; - remote-endpoint= <&csi20vin1>; + remote-endpoint = <&csi20vin1>; }; vin1csi40: endpoint@2 { reg = <2>; - remote-endpoint= <&csi40vin1>; + remote-endpoint = <&csi40vin1>; }; }; }; @@ -1153,11 +1230,11 @@ vin2csi20: endpoint@0 { reg = <0>; - remote-endpoint= <&csi20vin2>; + remote-endpoint = <&csi20vin2>; }; vin2csi40: endpoint@2 { reg = <2>; - remote-endpoint= <&csi40vin2>; + remote-endpoint = <&csi40vin2>; }; }; }; @@ -1185,11 +1262,11 @@ vin3csi20: endpoint@0 { reg = <0>; - remote-endpoint= <&csi20vin3>; + remote-endpoint = <&csi20vin3>; }; vin3csi40: endpoint@2 { reg = <2>; - remote-endpoint= <&csi40vin3>; + remote-endpoint = <&csi40vin3>; }; }; }; @@ -1217,11 +1294,11 @@ vin4csi20: endpoint@0 { reg = <0>; - remote-endpoint= <&csi20vin4>; + remote-endpoint = <&csi20vin4>; }; vin4csi40: endpoint@2 { reg = <2>; - remote-endpoint= <&csi40vin4>; + remote-endpoint = <&csi40vin4>; }; }; }; @@ -1249,11 +1326,11 @@ vin5csi20: endpoint@0 { reg = <0>; - remote-endpoint= <&csi20vin5>; + remote-endpoint = <&csi20vin5>; }; vin5csi40: endpoint@2 { reg = <2>; - remote-endpoint= <&csi40vin5>; + remote-endpoint = <&csi40vin5>; }; }; }; @@ -1281,11 +1358,11 @@ vin6csi20: endpoint@0 { reg = <0>; - remote-endpoint= <&csi20vin6>; + remote-endpoint = <&csi20vin6>; }; vin6csi40: endpoint@2 { reg = <2>; - remote-endpoint= <&csi40vin6>; + remote-endpoint = <&csi40vin6>; }; }; }; @@ -1313,57 +1390,280 @@ vin7csi20: endpoint@0 { reg = <0>; - remote-endpoint= <&csi20vin7>; + remote-endpoint = <&csi20vin7>; }; vin7csi40: endpoint@2 { reg = <2>; - remote-endpoint= <&csi40vin7>; + remote-endpoint = <&csi40vin7>; }; }; }; }; rcar_sound: sound@ec500000 { + /* + * #sound-dai-cells is required + * + * Single DAI : #sound-dai-cells = <0>; <&rcar_sound>; + * Multi DAI : #sound-dai-cells = <1>; <&rcar_sound N>; + */ + /* + * #clock-cells is required for audio_clkout0/1/2/3 + * + * clkout : #clock-cells = <0>; <&rcar_sound>; + * clkout0/1/2/3: #clock-cells = <1>; <&rcar_sound N>; + */ + compatible = "renesas,rcar_sound-r8a77965", "renesas,rcar_sound-gen3"; reg = <0 0xec500000 0 0x1000>, /* SCU */ <0 0xec5a0000 0 0x100>, /* ADG */ <0 0xec540000 0 0x1000>, /* SSIU */ <0 0xec541000 0 0x280>, /* SSI */ <0 0xec740000 0 0x200>; /* Audio DMAC peri peri*/ - /* placeholder */ + reg-names = "scu", "adg", "ssiu", "ssi", "audmapp"; + + clocks = <&cpg CPG_MOD 1005>, + <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>, + <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>, + <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>, + <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>, + <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>, + <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>, + <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>, + <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>, + <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>, + <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>, + <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, + <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, + <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, + <&audio_clk_a>, <&audio_clk_b>, + <&audio_clk_c>, + <&cpg CPG_CORE R8A77965_CLK_S0D4>; + clock-names = "ssi-all", + "ssi.9", "ssi.8", "ssi.7", "ssi.6", + "ssi.5", "ssi.4", "ssi.3", "ssi.2", + "ssi.1", "ssi.0", + "src.9", "src.8", "src.7", "src.6", + "src.5", "src.4", "src.3", "src.2", + "src.1", "src.0", + "mix.1", "mix.0", + "ctu.1", "ctu.0", + "dvc.0", "dvc.1", + "clk_a", "clk_b", "clk_c", "clk_i"; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + resets = <&cpg 1005>, + <&cpg 1006>, <&cpg 1007>, + <&cpg 1008>, <&cpg 1009>, + <&cpg 1010>, <&cpg 1011>, + <&cpg 1012>, <&cpg 1013>, + <&cpg 1014>, <&cpg 1015>; + reset-names = "ssi-all", + "ssi.9", "ssi.8", "ssi.7", "ssi.6", + "ssi.5", "ssi.4", "ssi.3", "ssi.2", + "ssi.1", "ssi.0"; + status = "disabled"; rcar_sound,dvc { dvc0: dvc-0 { + dmas = <&audma1 0xbc>; + dma-names = "tx"; }; dvc1: dvc-1 { + dmas = <&audma1 0xbe>; + dma-names = "tx"; }; }; + rcar_sound,mix { + mix0: mix-0 { }; + mix1: mix-1 { }; + }; + + rcar_sound,ctu { + ctu00: ctu-0 { }; + ctu01: ctu-1 { }; + ctu02: ctu-2 { }; + ctu03: ctu-3 { }; + ctu10: ctu-4 { }; + ctu11: ctu-5 { }; + ctu12: ctu-6 { }; + ctu13: ctu-7 { }; + }; + rcar_sound,src { src0: src-0 { + interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x85>, <&audma1 0x9a>; + dma-names = "rx", "tx"; }; src1: src-1 { + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x87>, <&audma1 0x9c>; + dma-names = "rx", "tx"; + }; + src2: src-2 { + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x89>, <&audma1 0x9e>; + dma-names = "rx", "tx"; + }; + src3: src-3 { + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x8b>, <&audma1 0xa0>; + dma-names = "rx", "tx"; + }; + src4: src-4 { + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x8d>, <&audma1 0xb0>; + dma-names = "rx", "tx"; + }; + src5: src-5 { + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x8f>, <&audma1 0xb2>; + dma-names = "rx", "tx"; + }; + src6: src-6 { + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x91>, <&audma1 0xb4>; + dma-names = "rx", "tx"; + }; + src7: src-7 { + interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x93>, <&audma1 0xb6>; + dma-names = "rx", "tx"; + }; + src8: src-8 { + interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x95>, <&audma1 0xb8>; + dma-names = "rx", "tx"; + }; + src9: src-9 { + interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x97>, <&audma1 0xba>; + dma-names = "rx", "tx"; }; }; rcar_sound,ssi { ssi0: ssi-0 { + interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>; + dma-names = "rx", "tx", "rxu", "txu"; }; ssi1: ssi-1 { + interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x03>, <&audma1 0x04>, <&audma0 0x49>, <&audma1 0x4a>; + dma-names = "rx", "tx", "rxu", "txu"; }; - }; - - ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; + ssi2: ssi-2 { + interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x05>, <&audma1 0x06>, <&audma0 0x63>, <&audma1 0x64>; + dma-names = "rx", "tx", "rxu", "txu"; }; - port@1 { - reg = <1>; + ssi3: ssi-3 { + interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x07>, <&audma1 0x08>, <&audma0 0x6f>, <&audma1 0x70>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi4: ssi-4 { + interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x09>, <&audma1 0x0a>, <&audma0 0x71>, <&audma1 0x72>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi5: ssi-5 { + interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0b>, <&audma1 0x0c>, <&audma0 0x73>, <&audma1 0x74>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi6: ssi-6 { + interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0d>, <&audma1 0x0e>, <&audma0 0x75>, <&audma1 0x76>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi7: ssi-7 { + interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0f>, <&audma1 0x10>, <&audma0 0x79>, <&audma1 0x7a>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi8: ssi-8 { + interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x11>, <&audma1 0x12>, <&audma0 0x7b>, <&audma1 0x7c>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi9: ssi-9 { + interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x13>, <&audma1 0x14>, <&audma0 0x7d>, <&audma1 0x7e>; + dma-names = "rx", "tx", "rxu", "txu"; }; }; }; + audma0: dma-controller@ec700000 { + compatible = "renesas,dmac-r8a77965", + "renesas,rcar-dmac"; + reg = <0 0xec700000 0 0x10000>; + interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 502>; + clock-names = "fck"; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + resets = <&cpg 502>; + #dma-cells = <1>; + dma-channels = <16>; + }; + + audma1: dma-controller@ec720000 { + compatible = "renesas,dmac-r8a77965", + "renesas,rcar-dmac"; + reg = <0 0xec720000 0 0x10000>; + interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 501>; + clock-names = "fck"; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + resets = <&cpg 501>; + #dma-cells = <1>; + dma-channels = <16>; + }; + xhci0: usb@ee000000 { compatible = "renesas,xhci-r8a77965", "renesas,rcar-gen3-xhci"; @@ -1390,11 +1690,11 @@ compatible = "generic-ohci"; reg = <0 0xee080000 0 0x100>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 703>; + clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; phys = <&usb2_phy0>; phy-names = "usb"; power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; - resets = <&cpg 703>; + resets = <&cpg 703>, <&cpg 704>; status = "disabled"; }; @@ -1414,12 +1714,12 @@ compatible = "generic-ehci"; reg = <0 0xee080100 0 0x100>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 703>; + clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; phys = <&usb2_phy0>; phy-names = "usb"; companion = <&ohci0>; power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; - resets = <&cpg 703>; + resets = <&cpg 703>, <&cpg 704>; status = "disabled"; }; @@ -1441,9 +1741,9 @@ "renesas,rcar-gen3-usb2-phy"; reg = <0 0xee080200 0 0x700>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 703>; + clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; - resets = <&cpg 703>; + resets = <&cpg 703>, <&cpg 704>; #phy-cells = <0>; status = "disabled"; }; @@ -1452,9 +1752,9 @@ compatible = "renesas,usb2-phy-r8a77965", "renesas,rcar-gen3-usb2-phy"; reg = <0 0xee0a0200 0 0x700>; - clocks = <&cpg CPG_MOD 703>; + clocks = <&cpg CPG_MOD 702>; power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; - resets = <&cpg 703>; + resets = <&cpg 702>; #phy-cells = <0>; status = "disabled"; }; @@ -1507,6 +1807,17 @@ status = "disabled"; }; + sata: sata@ee300000 { + compatible = "renesas,sata-r8a77965", + "renesas,rcar-gen3-sata"; + reg = <0 0xee300000 0 0x200000>; + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 815>; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + resets = <&cpg 815>; + status = "disabled"; + }; + gic: interrupt-controller@f1010000 { compatible = "arm,gic-400"; #interrupt-cells = <3>; @@ -1578,6 +1889,16 @@ status = "disabled"; }; + fdp1@fe940000 { + compatible = "renesas,fdp1"; + reg = <0 0xfe940000 0 0x2400>; + interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 119>; + power-domains = <&sysc R8A77965_PD_A3VP>; + resets = <&cpg 119>; + renesas,fcp = <&fcpf0>; + }; + fcpf0: fcp@fe950000 { compatible = "renesas,fcpf"; reg = <0 0xfe950000 0 0x200>; @@ -1843,14 +2164,6 @@ }; }; - timer { - compatible = "arm,armv8-timer"; - interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; - }; - thermal-zones { sensor_thermal1: sensor-thermal1 { polling-delay-passive = <250>; @@ -1895,6 +2208,14 @@ }; }; + timer { + compatible = "arm,armv8-timer"; + interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + }; + /* External USB clocks - can be overridden by the board */ usb3s0_clk: usb3s0 { compatible = "fixed-clock"; diff --git a/dts/src/arm64/renesas/r8a77970-v3msk.dts b/dts/src/arm64/renesas/r8a77970-v3msk.dts index 8eac8ca655..0dbcb4cccc 100644 --- a/dts/src/arm64/renesas/r8a77970-v3msk.dts +++ b/dts/src/arm64/renesas/r8a77970-v3msk.dts @@ -51,6 +51,15 @@ regulator-always-on; }; + vcc_vddq_vin0: regulator-2 { + compatible = "regulator-fixed"; + regulator-name = "VCC_VDDQ_VIN0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + lvds-decoder { compatible = "thine,thc63lvd1024"; vcc-supply = <&vcc_d3_3v>; @@ -128,6 +137,12 @@ function = "i2c0"; }; + mmc_pins: mmc_3_3v { + groups = "mmc_data8", "mmc_ctrl"; + function = "mmc"; + power-source = <3300>; + }; + scif0_pins: scif0 { groups = "scif0_data"; function = "scif0"; @@ -192,6 +207,17 @@ }; }; +&mmc0 { + pinctrl-0 = <&mmc_pins>; + pinctrl-names = "default"; + + vmmc-supply = <&vcc_d3_3v>; + vqmmc-supply = <&vcc_vddq_vin0>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + &scif0 { pinctrl-0 = <&scif0_pins>; pinctrl-names = "default"; diff --git a/dts/src/arm64/renesas/r8a77970.dtsi b/dts/src/arm64/renesas/r8a77970.dtsi index 954168858f..cba7885cf7 100644 --- a/dts/src/arm64/renesas/r8a77970.dtsi +++ b/dts/src/arm64/renesas/r8a77970.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source for the r8a77970 SoC + * Device Tree Source for the R-Car V3M (R8A77970) SoC * * Copyright (C) 2016-2017 Renesas Electronics Corp. * Copyright (C) 2017 Cogent Embedded, Inc. @@ -24,6 +24,13 @@ i2c4 = &i2c4; }; + /* External CAN clock - to be overridden by boards that provide it */ + can_clk: can { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -82,13 +89,6 @@ method = "smc"; }; - /* External CAN clock - to be overridden by boards that provide it */ - can_clk: can { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <0>; - }; - /* External SCIF clock - to be overridden by boards that provide it */ scif_clk: scif { compatible = "fixed-clock"; @@ -209,6 +209,76 @@ reg = <0 0xe6060000 0 0x504>; }; + cmt0: timer@e60f0000 { + compatible = "renesas,r8a77970-cmt0", + "renesas,rcar-gen3-cmt0"; + reg = <0 0xe60f0000 0 0x1004>; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 303>; + clock-names = "fck"; + power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; + resets = <&cpg 303>; + status = "disabled"; + }; + + cmt1: timer@e6130000 { + compatible = "renesas,r8a77970-cmt1", + "renesas,rcar-gen3-cmt1"; + reg = <0 0xe6130000 0 0x1004>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 302>; + clock-names = "fck"; + power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; + resets = <&cpg 302>; + status = "disabled"; + }; + + cmt2: timer@e6140000 { + compatible = "renesas,r8a77970-cmt1", + "renesas,rcar-gen3-cmt1"; + reg = <0 0xe6140000 0 0x1004>; + interrupts = <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 301>; + clock-names = "fck"; + power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; + resets = <&cpg 301>; + status = "disabled"; + }; + + cmt3: timer@e6148000 { + compatible = "renesas,r8a77970-cmt1", + "renesas,rcar-gen3-cmt1"; + reg = <0 0xe6148000 0 0x1004>; + interrupts = <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 300>; + clock-names = "fck"; + power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; + resets = <&cpg 300>; + status = "disabled"; + }; + cpg: clock-controller@e6150000 { compatible = "renesas,r8a77970-cpg-mssr"; reg = <0 0xe6150000 0 0x1000>; @@ -544,6 +614,16 @@ status = "disabled"; }; + tpu: pwm@e6e80000 { + compatible = "renesas,tpu-r8a77970", "renesas,tpu"; + reg = <0 0xe6e80000 0 0x148>; + interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 304>; + power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; + resets = <&cpg 304>; + #pwm-cells = <3>; + status = "disabled"; + }; vin0: video@e6ef0000 { compatible = "renesas,vin-r8a77970"; @@ -567,7 +647,7 @@ vin0csi40: endpoint@2 { reg = <2>; - remote-endpoint= <&csi40vin0>; + remote-endpoint = <&csi40vin0>; }; }; }; @@ -595,7 +675,7 @@ vin1csi40: endpoint@2 { reg = <2>; - remote-endpoint= <&csi40vin1>; + remote-endpoint = <&csi40vin1>; }; }; }; @@ -623,7 +703,7 @@ vin2csi40: endpoint@2 { reg = <2>; - remote-endpoint= <&csi40vin2>; + remote-endpoint = <&csi40vin2>; }; }; }; @@ -651,7 +731,7 @@ vin3csi40: endpoint@2 { reg = <2>; - remote-endpoint= <&csi40vin3>; + remote-endpoint = <&csi40vin3>; }; }; }; @@ -754,6 +834,18 @@ #iommu-cells = <1>; }; + mmc0: mmc@ee140000 { + compatible = "renesas,sdhi-r8a77970", + "renesas,rcar-gen3-sdhi"; + reg = <0 0xee140000 0 0x2000>; + interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 314>; + power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; + resets = <&cpg 314>; + max-frequency = <200000000>; + status = "disabled"; + }; + gic: interrupt-controller@f1010000 { compatible = "arm,gic-400"; #interrupt-cells = <3>; diff --git a/dts/src/arm64/renesas/r8a77980-condor.dts b/dts/src/arm64/renesas/r8a77980-condor.dts index 9f25c407df..fe2e2c051c 100644 --- a/dts/src/arm64/renesas/r8a77980-condor.dts +++ b/dts/src/arm64/renesas/r8a77980-condor.dts @@ -45,6 +45,56 @@ regulator-boot-on; regulator-always-on; }; + + d1_8v: regulator-2 { + compatible = "regulator-fixed"; + regulator-name = "D1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + hdmi-out { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con: endpoint { + remote-endpoint = <&adv7511_out>; + }; + }; + }; + + lvds-decoder { + compatible = "thine,thc63lvd1024"; + vcc-supply = <&d3_3v>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + thc63lvd1024_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + + port@2 { + reg = <2>; + thc63lvd1024_out: endpoint { + remote-endpoint = <&adv7511_in>; + }; + }; + }; + }; + + x1_clk: x1-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <148500000>; + }; }; &avb { @@ -74,6 +124,13 @@ }; }; +&du { + clocks = <&cpg CPG_MOD 724>, + <&x1_clk>; + clock-names = "du.0", "dclkin.0"; + status = "okay"; +}; + &extal_clk { clock-frequency = <16666666>; }; @@ -102,6 +159,55 @@ gpio-controller; #gpio-cells = <2>; }; + + hdmi@39 { + compatible = "adi,adv7511w"; + reg = <0x39>; + interrupt-parent = <&gpio1>; + interrupts = <20 IRQ_TYPE_LEVEL_LOW>; + avdd-supply = <&d1_8v>; + dvdd-supply = <&d1_8v>; + pvdd-supply = <&d1_8v>; + bgvdd-supply = <&d1_8v>; + dvdd-3v-supply = <&d3_3v>; + + adi,input-depth = <8>; + adi,input-colorspace = "rgb"; + adi,input-clock = "1x"; + adi,input-style = <1>; + adi,input-justification = "evenly"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7511_in: endpoint { + remote-endpoint = <&thc63lvd1024_out>; + }; + }; + + port@1 { + reg = <1>; + adv7511_out: endpoint { + remote-endpoint = <&hdmi_con>; + }; + }; + }; + }; +}; + +&lvds0 { + status = "okay"; + + ports { + port@1 { + lvds0_out: endpoint { + remote-endpoint = <&thc63lvd1024_in>; + }; + }; + }; }; &mmc0 { @@ -117,6 +223,18 @@ status = "okay"; }; +&pciec { + status = "okay"; +}; + +&pcie_bus_clk { + clock-frequency = <100000000>; +}; + +&pcie_phy { + status = "okay"; +}; + &pfc { avb_pins: avb { groups = "avb_mdio", "avb_rgmii"; @@ -156,6 +274,11 @@ }; }; +&rwdt { + timeout-sec = <60>; + status = "okay"; +}; + &scif0 { pinctrl-0 = <&scif0_pins>, <&scif_clk_pins>; pinctrl-names = "default"; diff --git a/dts/src/arm64/renesas/r8a77980-v3hsk.dts b/dts/src/arm64/renesas/r8a77980-v3hsk.dts index 9dac42f8f8..dd14a41b32 100644 --- a/dts/src/arm64/renesas/r8a77980-v3hsk.dts +++ b/dts/src/arm64/renesas/r8a77980-v3hsk.dts @@ -27,6 +27,72 @@ /* first 128MB is reserved for secure area. */ reg = <0 0x48000000 0 0x78000000>; }; + + hdmi-out { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con: endpoint { + remote-endpoint = <&adv7511_out>; + }; + }; + }; + + lvds-decoder { + compatible = "thine,thc63lvd1024"; + vcc-supply = <&vcc3v3_d5>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + thc63lvd1024_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + + port@2 { + reg = <2>; + thc63lvd1024_out: endpoint { + remote-endpoint = <&adv7511_in>; + }; + }; + }; + }; + + osc1_clk: osc1-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <148500000>; + }; + + vcc1v8_d4: regulator-0 { + compatible = "regulator-fixed"; + regulator-name = "VCC1V8_D4"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + vcc3v3_d5: regulator-1 { + compatible = "regulator-fixed"; + regulator-name = "VCC3V3_D5"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; +}; + +&du { + clocks = <&cpg CPG_MOD 724>, + <&osc1_clk>; + clock-names = "du.0", "dclkin.0"; + status = "okay"; }; &extal_clk { @@ -53,6 +119,64 @@ }; }; +&i2c0 { + pinctrl-0 = <&i2c0_pins>; + pinctrl-names = "default"; + + status = "okay"; + clock-frequency = <400000>; + + hdmi@39 { + compatible = "adi,adv7511w"; + #sound-dai-cells = <0>; + reg = <0x39>; + interrupt-parent = <&gpio1>; + interrupts = <20 IRQ_TYPE_LEVEL_LOW>; + avdd-supply = <&vcc1v8_d4>; + dvdd-supply = <&vcc1v8_d4>; + pvdd-supply = <&vcc1v8_d4>; + bgvdd-supply = <&vcc1v8_d4>; + dvdd-3v-supply = <&vcc3v3_d5>; + + adi,input-depth = <8>; + adi,input-colorspace = "rgb"; + adi,input-clock = "1x"; + adi,input-style = <1>; + adi,input-justification = "evenly"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7511_in: endpoint { + remote-endpoint = <&thc63lvd1024_out>; + }; + }; + + port@1 { + reg = <1>; + adv7511_out: endpoint { + remote-endpoint = <&hdmi_con>; + }; + }; + }; + }; +}; + +&lvds0 { + status = "okay"; + + ports { + port@1 { + lvds0_out: endpoint { + remote-endpoint = <&thc63lvd1024_in>; + }; + }; + }; +}; + &pfc { gether_pins: gether { groups = "gether_mdio_a", "gether_rgmii", @@ -60,6 +184,11 @@ function = "gether"; }; + i2c0_pins: i2c0 { + groups = "i2c0"; + function = "i2c0"; + }; + scif0_pins: scif0 { groups = "scif0_data"; function = "scif0"; @@ -71,6 +200,11 @@ }; }; +&rwdt { + timeout-sec = <60>; + status = "okay"; +}; + &scif0 { pinctrl-0 = <&scif0_pins>, <&scif_clk_pins>; pinctrl-names = "default"; diff --git a/dts/src/arm64/renesas/r8a77980.dtsi b/dts/src/arm64/renesas/r8a77980.dtsi index b8c9a56562..d4952b527d 100644 --- a/dts/src/arm64/renesas/r8a77980.dtsi +++ b/dts/src/arm64/renesas/r8a77980.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source for the r8a77980 SoC + * Device Tree Source for the R-Car V3H (R8A77980) SoC * * Copyright (C) 2018 Renesas Electronics Corp. * Copyright (C) 2018 Cogent Embedded, Inc. @@ -25,6 +25,13 @@ i2c5 = &i2c5; }; + /* External CAN clock - to be overridden by boards that provide it */ + can_clk: can { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -77,27 +84,36 @@ }; }; - /* External CAN clock - to be overridden by boards that provide it */ - can_clk: can { + extal_clk: extal { compatible = "fixed-clock"; #clock-cells = <0>; + /* This value must be overridden by the board */ clock-frequency = <0>; }; - extal_clk: extal { + extalr_clk: extalr { compatible = "fixed-clock"; #clock-cells = <0>; /* This value must be overridden by the board */ clock-frequency = <0>; }; - extalr_clk: extalr { + /* External PCIe clock - can be overridden by the board */ + pcie_bus_clk: pcie_bus { compatible = "fixed-clock"; #clock-cells = <0>; - /* This value must be overridden by the board */ clock-frequency = <0>; }; + pmu_a53 { + compatible = "arm,cortex-a53-pmu"; + interrupts-extended = <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&a53_0>, <&a53_1>, <&a53_2>, <&a53_3>; + }; + psci { compatible = "arm,psci-1.0", "arm,psci-0.2"; method = "smc"; @@ -118,6 +134,16 @@ #size-cells = <2>; ranges; + rwdt: watchdog@e6020000 { + compatible = "renesas,r8a77980-wdt", + "renesas,rcar-gen3-wdt"; + reg = <0 0xe6020000 0 0x0c>; + clocks = <&cpg CPG_MOD 402>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 402>; + status = "disabled"; + }; + gpio0: gpio@e6050000 { compatible = "renesas,gpio-r8a77980", "renesas,rcar-gen3-gpio"; @@ -213,6 +239,76 @@ reg = <0 0xe6060000 0 0x50c>; }; + cmt0: timer@e60f0000 { + compatible = "renesas,r8a77980-cmt0", + "renesas,rcar-gen3-cmt0"; + reg = <0 0xe60f0000 0 0x1004>; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 303>; + clock-names = "fck"; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 303>; + status = "disabled"; + }; + + cmt1: timer@e6130000 { + compatible = "renesas,r8a77980-cmt1", + "renesas,rcar-gen3-cmt1"; + reg = <0 0xe6130000 0 0x1004>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 302>; + clock-names = "fck"; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 302>; + status = "disabled"; + }; + + cmt2: timer@e6140000 { + compatible = "renesas,r8a77980-cmt1", + "renesas,rcar-gen3-cmt1"; + reg = <0 0xe6140000 0 0x1004>; + interrupts = <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 301>; + clock-names = "fck"; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 301>; + status = "disabled"; + }; + + cmt3: timer@e6148000 { + compatible = "renesas,r8a77980-cmt1", + "renesas,rcar-gen3-cmt1"; + reg = <0 0xe6148000 0 0x1004>; + interrupts = <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 300>; + clock-names = "fck"; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 300>; + status = "disabled"; + }; + cpg: clock-controller@e6150000 { compatible = "renesas,r8a77980-cpg-mssr"; reg = <0 0xe6150000 0 0x1000>; @@ -418,6 +514,16 @@ status = "disabled"; }; + pcie_phy: pcie-phy@e65d0000 { + compatible = "renesas,r8a77980-pcie-phy"; + reg = <0 0xe65d0000 0 0x8000>; + #phy-cells = <0>; + clocks = <&cpg CPG_MOD 319>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 319>; + status = "disabled"; + }; + canfd: can@e66c0000 { compatible = "renesas,r8a77980-canfd", "renesas,rcar-gen3-canfd"; @@ -443,69 +549,6 @@ }; }; - ipmmu_ds1: mmu@e7740000 { - compatible = "renesas,ipmmu-r8a77980"; - reg = <0 0xe7740000 0 0x1000>; - renesas,ipmmu-main = <&ipmmu_mm 0>; - power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; - #iommu-cells = <1>; - }; - - ipmmu_vip0: mmu@e7b00000 { - compatible = "renesas,ipmmu-r8a77980"; - reg = <0 0xe7b00000 0 0x1000>; - power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; - #iommu-cells = <1>; - }; - - ipmmu_vip1: mmu@e7960000 { - compatible = "renesas,ipmmu-r8a77980"; - reg = <0 0xe7960000 0 0x1000>; - power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; - #iommu-cells = <1>; - }; - - ipmmu_ir: mmu@ff8b0000 { - compatible = "renesas,ipmmu-r8a77980"; - reg = <0 0xff8b0000 0 0x1000>; - renesas,ipmmu-main = <&ipmmu_mm 3>; - power-domains = <&sysc R8A77980_PD_A3IR>; - #iommu-cells = <1>; - }; - - ipmmu_mm: mmu@e67b0000 { - compatible = "renesas,ipmmu-r8a77980"; - reg = <0 0xe67b0000 0 0x1000>; - interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>; - power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; - #iommu-cells = <1>; - }; - - ipmmu_rt: mmu@ffc80000 { - compatible = "renesas,ipmmu-r8a77980"; - reg = <0 0xffc80000 0 0x1000>; - renesas,ipmmu-main = <&ipmmu_mm 10>; - power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; - #iommu-cells = <1>; - }; - - ipmmu_vc0: mmu@fe6b0000 { - compatible = "renesas,ipmmu-r8a77980"; - reg = <0 0xfe6b0000 0 0x1000>; - renesas,ipmmu-main = <&ipmmu_mm 12>; - power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; - #iommu-cells = <1>; - }; - - ipmmu_vi0: mmu@febd0000 { - compatible = "renesas,ipmmu-r8a77980"; - reg = <0 0xfebd0000 0 0x1000>; - renesas,ipmmu-main = <&ipmmu_mm 14>; - power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; - #iommu-cells = <1>; - }; - avb: ethernet@e6800000 { compatible = "renesas,etheravb-r8a77980", "renesas,etheravb-rcar-gen3"; @@ -623,6 +666,313 @@ status = "disabled"; }; + tpu: pwm@e6e80000 { + compatible = "renesas,tpu-r8a77980", "renesas,tpu"; + reg = <0 0xe6e80000 0 0x148>; + interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 304>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 304>; + #pwm-cells = <3>; + status = "disabled"; + }; + + vin0: video@e6ef0000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6ef0000 0 0x1000>; + interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 811>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 811>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin0csi40: endpoint@2 { + reg = <2>; + remote-endpoint = <&csi40vin0>; + }; + }; + }; + }; + + vin1: video@e6ef1000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6ef1000 0 0x1000>; + interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 810>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + status = "disabled"; + resets = <&cpg 810>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin1csi40: endpoint@2 { + reg = <2>; + remote-endpoint = <&csi40vin1>; + }; + }; + }; + }; + + vin2: video@e6ef2000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6ef2000 0 0x1000>; + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 809>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 809>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin2csi40: endpoint@2 { + reg = <2>; + remote-endpoint = <&csi40vin2>; + }; + }; + }; + }; + + vin3: video@e6ef3000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6ef3000 0 0x1000>; + interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 808>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 808>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin3csi40: endpoint@2 { + reg = <2>; + remote-endpoint = <&csi40vin3>; + }; + }; + }; + }; + + vin4: video@e6ef4000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6ef4000 0 0x1000>; + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 807>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 807>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin4csi41: endpoint@2 { + reg = <2>; + remote-endpoint = <&csi41vin4>; + }; + }; + }; + }; + + vin5: video@e6ef5000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6ef5000 0 0x1000>; + interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 806>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 806>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin5csi41: endpoint@2 { + reg = <2>; + remote-endpoint = <&csi41vin5>; + }; + }; + }; + }; + + vin6: video@e6ef6000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6ef6000 0 0x1000>; + interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 805>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 805>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin6csi41: endpoint@2 { + reg = <2>; + remote-endpoint = <&csi41vin6>; + }; + }; + }; + }; + + vin7: video@e6ef7000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6ef7000 0 0x1000>; + interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 804>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 804>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin7csi41: endpoint@2 { + reg = <2>; + remote-endpoint = <&csi41vin7>; + }; + }; + }; + }; + + vin8: video@e6ef8000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6ef8000 0 0x1000>; + interrupts = <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 628>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 628>; + status = "disabled"; + }; + + vin9: video@e6ef9000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6ef9000 0 0x1000>; + interrupts = <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 627>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 627>; + status = "disabled"; + }; + + vin10: video@e6efa000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6efa000 0 0x1000>; + interrupts = <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 625>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 625>; + status = "disabled"; + }; + + vin11: video@e6efb000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6efb000 0 0x1000>; + interrupts = <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 618>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 618>; + status = "disabled"; + }; + + vin12: video@e6efc000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6efc000 0 0x1000>; + interrupts = <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 612>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 612>; + status = "disabled"; + }; + + vin13: video@e6efd000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6efd000 0 0x1000>; + interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 608>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 608>; + status = "disabled"; + }; + + vin14: video@e6efe000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6efe000 0 0x1000>; + interrupts = <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 605>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 605>; + status = "disabled"; + }; + + vin15: video@e6eff000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6eff000 0 0x1000>; + interrupts = <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 604>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 604>; + status = "disabled"; + }; + dmac1: dma-controller@e7300000 { compatible = "renesas,dmac-r8a77980", "renesas,rcar-dmac"; @@ -655,6 +1005,14 @@ resets = <&cpg 218>; #dma-cells = <1>; dma-channels = <16>; + iommus = <&ipmmu_ds1 0>, <&ipmmu_ds1 1>, + <&ipmmu_ds1 2>, <&ipmmu_ds1 3>, + <&ipmmu_ds1 4>, <&ipmmu_ds1 5>, + <&ipmmu_ds1 6>, <&ipmmu_ds1 7>, + <&ipmmu_ds1 8>, <&ipmmu_ds1 9>, + <&ipmmu_ds1 10>, <&ipmmu_ds1 11>, + <&ipmmu_ds1 12>, <&ipmmu_ds1 13>, + <&ipmmu_ds1 14>, <&ipmmu_ds1 15>; }; dmac2: dma-controller@e7310000 { @@ -689,6 +1047,14 @@ resets = <&cpg 217>; #dma-cells = <1>; dma-channels = <16>; + iommus = <&ipmmu_ds1 16>, <&ipmmu_ds1 17>, + <&ipmmu_ds1 18>, <&ipmmu_ds1 19>, + <&ipmmu_ds1 20>, <&ipmmu_ds1 21>, + <&ipmmu_ds1 22>, <&ipmmu_ds1 23>, + <&ipmmu_ds1 24>, <&ipmmu_ds1 25>, + <&ipmmu_ds1 26>, <&ipmmu_ds1 27>, + <&ipmmu_ds1 28>, <&ipmmu_ds1 29>, + <&ipmmu_ds1 30>, <&ipmmu_ds1 31>; }; gether: ethernet@e7400000 { @@ -703,6 +1069,69 @@ status = "disabled"; }; + ipmmu_ds1: mmu@e7740000 { + compatible = "renesas,ipmmu-r8a77980"; + reg = <0 0xe7740000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 0>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_ir: mmu@ff8b0000 { + compatible = "renesas,ipmmu-r8a77980"; + reg = <0 0xff8b0000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 3>; + power-domains = <&sysc R8A77980_PD_A3IR>; + #iommu-cells = <1>; + }; + + ipmmu_mm: mmu@e67b0000 { + compatible = "renesas,ipmmu-r8a77980"; + reg = <0 0xe67b0000 0 0x1000>; + interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_rt: mmu@ffc80000 { + compatible = "renesas,ipmmu-r8a77980"; + reg = <0 0xffc80000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 10>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_vc0: mmu@fe6b0000 { + compatible = "renesas,ipmmu-r8a77980"; + reg = <0 0xfe6b0000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 12>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_vi0: mmu@febd0000 { + compatible = "renesas,ipmmu-r8a77980"; + reg = <0 0xfebd0000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 14>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_vip0: mmu@e7b00000 { + compatible = "renesas,ipmmu-r8a77980"; + reg = <0 0xe7b00000 0 0x1000>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_vip1: mmu@e7960000 { + compatible = "renesas,ipmmu-r8a77980"; + reg = <0 0xe7960000 0 0x1000>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + mmc0: mmc@ee140000 { compatible = "renesas,sdhi-r8a77980", "renesas,rcar-gen3-sdhi"; @@ -732,6 +1161,38 @@ resets = <&cpg 408>; }; + pciec: pcie@fe000000 { + compatible = "renesas,pcie-r8a77980", + "renesas,pcie-rcar-gen3"; + reg = <0 0xfe000000 0 0x80000>; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x00 0xff>; + device_type = "pci"; + ranges = < + 0x01000000 0 0x00000000 0 0xfe100000 0 0x0100000 + 0x02000000 0 0xfe200000 0 0xfe200000 0 0x0200000 + 0x02000000 0 0x30000000 0 0x30000000 0 0x8000000 + 0x42000000 0 0x38000000 0 0x38000000 0 0x8000000 + >; + dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 + 0 0x80000000>; + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 148 + IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>; + clock-names = "pcie", "pcie_bus"; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 319>; + phys = <&pcie_phy>; + phy-names = "pcie"; + status = "disabled"; + }; + vspd0: vsp@fea20000 { compatible = "renesas,vsp2"; reg = <0 0xfea20000 0 0x5000>; @@ -750,6 +1211,84 @@ resets = <&cpg 603>; }; + csi40: csi2@feaa0000 { + compatible = "renesas,r8a77980-csi2"; + reg = <0 0xfeaa0000 0 0x10000>; + interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 716>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 716>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + csi40vin0: endpoint@0 { + reg = <0>; + remote-endpoint = <&vin0csi40>; + }; + csi40vin1: endpoint@1 { + reg = <1>; + remote-endpoint = <&vin1csi40>; + }; + csi40vin2: endpoint@2 { + reg = <2>; + remote-endpoint = <&vin2csi40>; + }; + csi40vin3: endpoint@3 { + reg = <3>; + remote-endpoint = <&vin3csi40>; + }; + }; + }; + }; + + csi41: csi2@feab0000 { + compatible = "renesas,r8a77980-csi2"; + reg = <0 0xfeab0000 0 0x10000>; + interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 715>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 715>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + csi41vin4: endpoint@0 { + reg = <0>; + remote-endpoint = <&vin4csi41>; + }; + csi41vin5: endpoint@1 { + reg = <1>; + remote-endpoint = <&vin5csi41>; + }; + csi41vin6: endpoint@2 { + reg = <2>; + remote-endpoint = <&vin6csi41>; + }; + csi41vin7: endpoint@3 { + reg = <3>; + remote-endpoint = <&vin7csi41>; + }; + }; + }; + }; + du: display@feb00000 { compatible = "renesas,du-r8a77980", "renesas,du-r8a77970"; diff --git a/dts/src/arm64/renesas/r8a77990-ebisu.dts b/dts/src/arm64/renesas/r8a77990-ebisu.dts index 2bc3a4884b..f342dd85b1 100644 --- a/dts/src/arm64/renesas/r8a77990-ebisu.dts +++ b/dts/src/arm64/renesas/r8a77990-ebisu.dts @@ -28,6 +28,111 @@ /* first 128MB is reserved for secure area. */ reg = <0x0 0x48000000 0x0 0x38000000>; }; + + cvbs-in { + compatible = "composite-video-connector"; + label = "CVBS IN"; + + port { + cvbs_con: endpoint { + remote-endpoint = <&adv7482_ain7>; + }; + }; + }; + + hdmi-in { + compatible = "hdmi-connector"; + label = "HDMI IN"; + type = "a"; + + port { + hdmi_in_con: endpoint { + remote-endpoint = <&adv7482_hdmi>; + }; + }; + }; + + hdmi-out { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_out: endpoint { + remote-endpoint = <&adv7511_out>; + }; + }; + }; + + lvds-decoder { + compatible = "thine,thc63lvd1024"; + vcc-supply = <®_3p3v>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + thc63lvd1024_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + + port@2 { + reg = <2>; + thc63lvd1024_out: endpoint { + remote-endpoint = <&adv7511_in>; + }; + }; + }; + }; + + vga { + compatible = "vga-connector"; + + port { + vga_in: endpoint { + remote-endpoint = <&adv7123_out>; + }; + }; + }; + + vga-encoder { + compatible = "adi,adv7123"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7123_in: endpoint { + remote-endpoint = <&du_out_rgb>; + }; + }; + port@1 { + reg = <1>; + adv7123_out: endpoint { + remote-endpoint = <&vga_in>; + }; + }; + }; + }; + + reg_3p3v: regulator1 { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + x13_clk: x13 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <74250000>; + }; }; &avb { @@ -47,6 +152,41 @@ }; }; +&csi40 { + status = "okay"; + + ports { + port@0 { + reg = <0>; + + csi40_in: endpoint { + clock-lanes = <0>; + data-lanes = <1 2>; + remote-endpoint = <&adv7482_txa>; + }; + }; + }; +}; + +&du { + pinctrl-0 = <&du_pins>; + pinctrl-names = "default"; + status = "okay"; + + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>, + <&x13_clk>; + clock-names = "du.0", "du.1", "dclkin.0"; + + ports { + port@0 { + endpoint { + remote-endpoint = <&adv7123_in>; + }; + }; + }; +}; + &ehci0 { status = "okay"; }; @@ -55,6 +195,105 @@ clock-frequency = <48000000>; }; +&i2c0 { + status = "okay"; + + hdmi-encoder@39 { + compatible = "adi,adv7511w"; + reg = <0x39>; + interrupt-parent = <&gpio1>; + interrupts = <1 IRQ_TYPE_LEVEL_LOW>; + + adi,input-depth = <8>; + adi,input-colorspace = "rgb"; + adi,input-clock = "1x"; + adi,input-style = <1>; + adi,input-justification = "evenly"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7511_in: endpoint { + remote-endpoint = <&thc63lvd1024_out>; + }; + }; + + port@1 { + reg = <1>; + adv7511_out: endpoint { + remote-endpoint = <&hdmi_con_out>; + }; + }; + }; + }; + + video-receiver@70 { + compatible = "adi,adv7482"; + reg = <0x70>; + + #address-cells = <1>; + #size-cells = <0>; + + interrupt-parent = <&gpio0>; + interrupt-names = "intrq1", "intrq2"; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>, + <17 IRQ_TYPE_LEVEL_LOW>; + + port@7 { + reg = <7>; + + adv7482_ain7: endpoint { + remote-endpoint = <&cvbs_con>; + }; + }; + + port@8 { + reg = <8>; + + adv7482_hdmi: endpoint { + remote-endpoint = <&hdmi_in_con>; + }; + }; + + port@a { + reg = <0xa>; + + adv7482_txa: endpoint { + clock-lanes = <0>; + data-lanes = <1 2>; + remote-endpoint = <&csi40_in>; + }; + }; + }; +}; + +&lvds0 { + status = "okay"; + + clocks = <&cpg CPG_MOD 727>, + <&x13_clk>, + <&extal_clk>; + clock-names = "fck", "dclkin.0", "extal"; + + ports { + port@1 { + lvds0_out: endpoint { + remote-endpoint = <&thc63lvd1024_in>; + }; + }; + }; +}; + +&lvds1 { + clocks = <&cpg CPG_MOD 727>, + <&x13_clk>, + <&extal_clk>; + clock-names = "fck", "dclkin.0", "extal"; +}; + &ohci0 { status = "okay"; }; @@ -67,6 +306,21 @@ }; }; + du_pins: du { + groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0"; + function = "du"; + }; + + pwm3_pins: pwm3 { + groups = "pwm3_b"; + function = "pwm3"; + }; + + pwm5_pins: pwm5 { + groups = "pwm5_a"; + function = "pwm5"; + }; + usb0_pins: usb { groups = "usb0_b"; function = "usb0"; @@ -78,6 +332,20 @@ }; }; +&pwm3 { + pinctrl-0 = <&pwm3_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pwm5 { + pinctrl-0 = <&pwm5_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + &rwdt { timeout-sec = <60>; status = "okay"; @@ -94,6 +362,10 @@ status = "okay"; }; +&vin4 { + status = "okay"; +}; + &xhci0 { pinctrl-0 = <&usb30_pins>; pinctrl-names = "default"; diff --git a/dts/src/arm64/renesas/r8a77990.dtsi b/dts/src/arm64/renesas/r8a77990.dtsi index ae89260baa..9509dc0566 100644 --- a/dts/src/arm64/renesas/r8a77990.dtsi +++ b/dts/src/arm64/renesas/r8a77990.dtsi @@ -1,11 +1,11 @@ /* SPDX-License-Identifier: GPL-2.0 */ /* - * Device Tree Source for the r8a77990 SoC + * Device Tree Source for the R-Car E3 (R8A77990) SoC * * Copyright (C) 2018 Renesas Electronics Corp. */ -#include <dt-bindings/clock/renesas-cpg-mssr.h> +#include <dt-bindings/clock/r8a77990-cpg-mssr.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/power/r8a77990-sysc.h> @@ -14,6 +14,17 @@ #address-cells = <2>; #size-cells = <2>; + aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + i2c6 = &i2c6; + i2c7 = &i2c7; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -22,7 +33,7 @@ compatible = "arm,cortex-a53", "arm,armv8"; reg = <0>; device_type = "cpu"; - power-domains = <&sysc 5>; + power-domains = <&sysc R8A77990_PD_CA53_CPU0>; next-level-cache = <&L2_CA53>; enable-method = "psci"; }; @@ -31,14 +42,14 @@ compatible = "arm,cortex-a53", "arm,armv8"; reg = <1>; device_type = "cpu"; - power-domains = <&sysc 6>; + power-domains = <&sysc R8A77990_PD_CA53_CPU1>; next-level-cache = <&L2_CA53>; enable-method = "psci"; }; L2_CA53: cache-controller-0 { compatible = "cache"; - power-domains = <&sysc 21>; + power-domains = <&sysc R8A77990_PD_CA53_SCU>; cache-unified; cache-level = <2>; }; @@ -63,6 +74,13 @@ method = "smc"; }; + /* External SCIF clock - to be overridden by boards that provide it */ + scif_clk: scif { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + soc: soc { compatible = "simple-bus"; interrupt-parent = <&gic>; @@ -75,7 +93,7 @@ "renesas,rcar-gen3-wdt"; reg = <0 0xe6020000 0 0x0c>; clocks = <&cpg CPG_MOD 402>; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; resets = <&cpg 402>; status = "disabled"; }; @@ -91,7 +109,7 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&cpg CPG_MOD 912>; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; resets = <&cpg 912>; }; @@ -106,7 +124,7 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&cpg CPG_MOD 911>; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; resets = <&cpg 911>; }; @@ -121,7 +139,7 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&cpg CPG_MOD 910>; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; resets = <&cpg 910>; }; @@ -136,7 +154,7 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&cpg CPG_MOD 909>; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; resets = <&cpg 909>; }; @@ -151,7 +169,7 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&cpg CPG_MOD 908>; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; resets = <&cpg 908>; }; @@ -166,7 +184,7 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&cpg CPG_MOD 907>; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; resets = <&cpg 907>; }; @@ -181,10 +199,122 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&cpg CPG_MOD 906>; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; resets = <&cpg 906>; }; + i2c0: i2c@e6500000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a77990", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe6500000 0 0x40>; + interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 931>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 931>; + i2c-scl-internal-delay-ns = <110>; + status = "disabled"; + }; + + i2c1: i2c@e6508000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a77990", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe6508000 0 0x40>; + interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 930>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 930>; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c2: i2c@e6510000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a77990", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe6510000 0 0x40>; + interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 929>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 929>; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c3: i2c@e66d0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a77990", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe66d0000 0 0x40>; + interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 928>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 928>; + i2c-scl-internal-delay-ns = <110>; + status = "disabled"; + }; + + i2c4: i2c@e66d8000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a77990", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe66d8000 0 0x40>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 927>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 927>; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c5: i2c@e66e0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a77990", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe66e0000 0 0x40>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 919>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 919>; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c6: i2c@e66e8000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a77990", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe66e8000 0 0x40>; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 918>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 918>; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c7: i2c@e6690000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a77990", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe6690000 0 0x40>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 1003>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 1003>; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + pfc: pin-controller@e6060000 { compatible = "renesas,pfc-r8a77990"; reg = <0 0xe6060000 0 0x508>; @@ -211,6 +341,132 @@ #power-domain-cells = <1>; }; + dmac0: dma-controller@e6700000 { + compatible = "renesas,dmac-r8a77990", + "renesas,rcar-dmac"; + reg = <0 0xe6700000 0 0x10000>; + interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 219>; + clock-names = "fck"; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 219>; + #dma-cells = <1>; + dma-channels = <16>; + iommus = <&ipmmu_ds0 0>, <&ipmmu_ds0 1>, + <&ipmmu_ds0 2>, <&ipmmu_ds0 3>, + <&ipmmu_ds0 4>, <&ipmmu_ds0 5>, + <&ipmmu_ds0 6>, <&ipmmu_ds0 7>, + <&ipmmu_ds0 8>, <&ipmmu_ds0 9>, + <&ipmmu_ds0 10>, <&ipmmu_ds0 11>, + <&ipmmu_ds0 12>, <&ipmmu_ds0 13>, + <&ipmmu_ds0 14>, <&ipmmu_ds0 15>; + }; + + dmac1: dma-controller@e7300000 { + compatible = "renesas,dmac-r8a77990", + "renesas,rcar-dmac"; + reg = <0 0xe7300000 0 0x10000>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 218>; + clock-names = "fck"; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 218>; + #dma-cells = <1>; + dma-channels = <16>; + iommus = <&ipmmu_ds1 0>, <&ipmmu_ds1 1>, + <&ipmmu_ds1 2>, <&ipmmu_ds1 3>, + <&ipmmu_ds1 4>, <&ipmmu_ds1 5>, + <&ipmmu_ds1 6>, <&ipmmu_ds1 7>, + <&ipmmu_ds1 8>, <&ipmmu_ds1 9>, + <&ipmmu_ds1 10>, <&ipmmu_ds1 11>, + <&ipmmu_ds1 12>, <&ipmmu_ds1 13>, + <&ipmmu_ds1 14>, <&ipmmu_ds1 15>; + }; + + dmac2: dma-controller@e7310000 { + compatible = "renesas,dmac-r8a77990", + "renesas,rcar-dmac"; + reg = <0 0xe7310000 0 0x10000>; + interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 217>; + clock-names = "fck"; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 217>; + #dma-cells = <1>; + dma-channels = <16>; + iommus = <&ipmmu_ds1 16>, <&ipmmu_ds1 17>, + <&ipmmu_ds1 18>, <&ipmmu_ds1 19>, + <&ipmmu_ds1 20>, <&ipmmu_ds1 21>, + <&ipmmu_ds1 22>, <&ipmmu_ds1 23>, + <&ipmmu_ds1 24>, <&ipmmu_ds1 25>, + <&ipmmu_ds1 26>, <&ipmmu_ds1 27>, + <&ipmmu_ds1 28>, <&ipmmu_ds1 29>, + <&ipmmu_ds1 30>, <&ipmmu_ds1 31>; + }; + ipmmu_ds0: mmu@e6740000 { compatible = "renesas,ipmmu-r8a77990"; reg = <0 0xe6740000 0 0x1000>; @@ -329,7 +585,7 @@ "ch20", "ch21", "ch22", "ch23", "ch24"; clocks = <&cpg CPG_MOD 812>; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; resets = <&cpg 812>; phy-mode = "rgmii"; #address-cells = <1>; @@ -337,18 +593,191 @@ status = "disabled"; }; + pwm0: pwm@e6e30000 { + compatible = "renesas,pwm-r8a77990", "renesas,pwm-rcar"; + reg = <0 0xe6e30000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm1: pwm@e6e31000 { + compatible = "renesas,pwm-r8a77990", "renesas,pwm-rcar"; + reg = <0 0xe6e31000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm2: pwm@e6e32000 { + compatible = "renesas,pwm-r8a77990", "renesas,pwm-rcar"; + reg = <0 0xe6e32000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm3: pwm@e6e33000 { + compatible = "renesas,pwm-r8a77990", "renesas,pwm-rcar"; + reg = <0 0xe6e33000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm4: pwm@e6e34000 { + compatible = "renesas,pwm-r8a77990", "renesas,pwm-rcar"; + reg = <0 0xe6e34000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm5: pwm@e6e35000 { + compatible = "renesas,pwm-r8a77990", "renesas,pwm-rcar"; + reg = <0 0xe6e35000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm6: pwm@e6e36000 { + compatible = "renesas,pwm-r8a77990", "renesas,pwm-rcar"; + reg = <0 0xe6e36000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + scif2: serial@e6e88000 { compatible = "renesas,scif-r8a77990", "renesas,rcar-gen3-scif", "renesas,scif"; reg = <0 0xe6e88000 0 64>; interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 310>; - clock-names = "fck"; - power-domains = <&sysc 32>; + clocks = <&cpg CPG_MOD 310>, + <&cpg CPG_CORE R8A77990_CLK_S3D1C>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; resets = <&cpg 310>; status = "disabled"; }; + msiof0: spi@e6e90000 { + compatible = "renesas,msiof-r8a77990", + "renesas,rcar-gen3-msiof"; + reg = <0 0xe6e90000 0 0x0064>; + interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 211>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 211>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + msiof1: spi@e6ea0000 { + compatible = "renesas,msiof-r8a77990", + "renesas,rcar-gen3-msiof"; + reg = <0 0xe6ea0000 0 0x0064>; + interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 210>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 210>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + msiof2: spi@e6c00000 { + compatible = "renesas,msiof-r8a77990", + "renesas,rcar-gen3-msiof"; + reg = <0 0xe6c00000 0 0x0064>; + interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 209>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 209>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + msiof3: spi@e6c10000 { + compatible = "renesas,msiof-r8a77990", + "renesas,rcar-gen3-msiof"; + reg = <0 0xe6c10000 0 0x0064>; + interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 208>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 208>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + vin4: video@e6ef4000 { + compatible = "renesas,vin-r8a77990"; + reg = <0 0xe6ef4000 0 0x1000>; + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 807>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 807>; + renesas,id = <4>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + + vin4csi40: endpoint { + remote-endpoint= <&csi40vin4>; + }; + }; + }; + }; + + vin5: video@e6ef5000 { + compatible = "renesas,vin-r8a77990"; + reg = <0 0xe6ef5000 0 0x1000>; + interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 806>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 806>; + renesas,id = <5>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + + vin5csi40: endpoint { + remote-endpoint= <&csi40vin5>; + }; + }; + }; + }; + xhci0: usb@ee000000 { compatible = "renesas,xhci-r8a77990", "renesas,rcar-gen3-xhci"; @@ -364,11 +793,11 @@ compatible = "generic-ohci"; reg = <0 0xee080000 0 0x100>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 703>; + clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; phys = <&usb2_phy0>; phy-names = "usb"; - power-domains = <&sysc 32>; - resets = <&cpg 703>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 703>, <&cpg 704>; status = "disabled"; }; @@ -376,12 +805,12 @@ compatible = "generic-ehci"; reg = <0 0xee080100 0 0x100>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 703>; + clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; phys = <&usb2_phy0>; phy-names = "usb"; companion = <&ohci0>; - power-domains = <&sysc 32>; - resets = <&cpg 703>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 703>, <&cpg 704>; status = "disabled"; }; @@ -390,9 +819,9 @@ "renesas,rcar-gen3-usb2-phy"; reg = <0 0xee080200 0 0x700>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 703>; - power-domains = <&sysc 32>; - resets = <&cpg 703>; + clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 703>, <&cpg 704>; #phy-cells = <0>; status = "disabled"; }; @@ -410,10 +839,208 @@ (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; clocks = <&cpg CPG_MOD 408>; clock-names = "clk"; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; resets = <&cpg 408>; }; + vspb0: vsp@fe960000 { + compatible = "renesas,vsp2"; + reg = <0 0xfe960000 0 0x8000>; + interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 626>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 626>; + renesas,fcp = <&fcpvb0>; + }; + + fcpvb0: fcp@fe96f000 { + compatible = "renesas,fcpv"; + reg = <0 0xfe96f000 0 0x200>; + clocks = <&cpg CPG_MOD 607>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 607>; + iommus = <&ipmmu_vp0 5>; + }; + + vspi0: vsp@fe9a0000 { + compatible = "renesas,vsp2"; + reg = <0 0xfe9a0000 0 0x8000>; + interrupts = <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 631>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 631>; + renesas,fcp = <&fcpvi0>; + }; + + fcpvi0: fcp@fe9af000 { + compatible = "renesas,fcpv"; + reg = <0 0xfe9af000 0 0x200>; + clocks = <&cpg CPG_MOD 611>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 611>; + iommus = <&ipmmu_vp0 8>; + }; + + vspd0: vsp@fea20000 { + compatible = "renesas,vsp2"; + reg = <0 0xfea20000 0 0x7000>; + interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 623>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 623>; + renesas,fcp = <&fcpvd0>; + }; + + fcpvd0: fcp@fea27000 { + compatible = "renesas,fcpv"; + reg = <0 0xfea27000 0 0x200>; + clocks = <&cpg CPG_MOD 603>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 603>; + iommus = <&ipmmu_vi0 8>; + }; + + vspd1: vsp@fea28000 { + compatible = "renesas,vsp2"; + reg = <0 0xfea28000 0 0x7000>; + interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 622>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 622>; + renesas,fcp = <&fcpvd1>; + }; + + fcpvd1: fcp@fea2f000 { + compatible = "renesas,fcpv"; + reg = <0 0xfea2f000 0 0x200>; + clocks = <&cpg CPG_MOD 602>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 602>; + iommus = <&ipmmu_vi0 9>; + }; + + csi40: csi2@feaa0000 { + compatible = "renesas,r8a77990-csi2", "renesas,rcar-gen3-csi2"; + reg = <0 0xfeaa0000 0 0x10000>; + interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 716>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 716>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + csi40vin4: endpoint@0 { + reg = <0>; + remote-endpoint = <&vin4csi40>; + }; + csi40vin5: endpoint@1 { + reg = <1>; + remote-endpoint = <&vin5csi40>; + }; + }; + }; + }; + + du: display@feb00000 { + compatible = "renesas,du-r8a77990"; + reg = <0 0xfeb00000 0 0x80000>; + interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>; + clock-names = "du.0", "du.1"; + vsps = <&vspd0 0 &vspd1 0>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + du_out_rgb: endpoint { + }; + }; + + port@1 { + reg = <1>; + du_out_lvds0: endpoint { + remote-endpoint = <&lvds0_in>; + }; + }; + + port@2 { + reg = <2>; + du_out_lvds1: endpoint { + remote-endpoint = <&lvds1_in>; + }; + }; + }; + }; + + lvds0: lvds-encoder@feb90000 { + compatible = "renesas,r8a77990-lvds"; + reg = <0 0xfeb90000 0 0x20>; + clocks = <&cpg CPG_MOD 727>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 727>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + lvds0_in: endpoint { + remote-endpoint = <&du_out_lvds0>; + }; + }; + + port@1 { + reg = <1>; + lvds0_out: endpoint { + }; + }; + }; + }; + + lvds1: lvds-encoder@feb90100 { + compatible = "renesas,r8a77990-lvds"; + reg = <0 0xfeb90100 0 0x20>; + clocks = <&cpg CPG_MOD 727>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 726>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + lvds1_in: endpoint { + remote-endpoint = <&du_out_lvds1>; + }; + }; + + port@1 { + reg = <1>; + lvds1_out: endpoint { + }; + }; + }; + }; + prr: chipid@fff00044 { compatible = "renesas,prr"; reg = <0 0xfff00044 0 4>; diff --git a/dts/src/arm64/renesas/r8a77995-draak.dts b/dts/src/arm64/renesas/r8a77995-draak.dts index a8e8f2669d..2405eaad02 100644 --- a/dts/src/arm64/renesas/r8a77995-draak.dts +++ b/dts/src/arm64/renesas/r8a77995-draak.dts @@ -2,7 +2,7 @@ /* * Device Tree Source for the Draak board * - * Copyright (C) 2016 Renesas Electronics Corp. + * Copyright (C) 2016-2018 Renesas Electronics Corp. * Copyright (C) 2017 Glider bvba */ @@ -24,55 +24,58 @@ stdout-path = "serial0:115200n8"; }; - vga { - compatible = "vga-connector"; + composite-in { + compatible = "composite-video-connector"; port { - vga_in: endpoint { - remote-endpoint = <&adv7123_out>; + composite_con_in: endpoint { + remote-endpoint = <&adv7180_in>; }; }; }; - vga-encoder { - compatible = "adi,adv7123"; - - ports { - #address-cells = <1>; - #size-cells = <0>; + hdmi-in { + compatible = "hdmi-connector"; + type = "a"; - port@0 { - reg = <0>; - adv7123_in: endpoint { - remote-endpoint = <&du_out_rgb>; - }; - }; - port@1 { - reg = <1>; - adv7123_out: endpoint { - remote-endpoint = <&vga_in>; - }; + port { + hdmi_con_in: endpoint { + remote-endpoint = <&adv7612_in>; }; }; }; - composite-in { - compatible = "composite-video-connector"; + hdmi-out { + compatible = "hdmi-connector"; + type = "a"; port { - composite_con_in: endpoint { - remote-endpoint = <&adv7180_in>; + hdmi_con_out: endpoint { + remote-endpoint = <&adv7511_out>; }; }; }; - hdmi-in { - compatible = "hdmi-connector"; - type = "a"; + lvds-decoder { + compatible = "thine,thc63lvd1024"; + vcc-supply = <®_3p3v>; - port { - hdmi_con_in: endpoint { - remote-endpoint = <&adv7612_in>; + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + thc63lvd1024_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + + port@2 { + reg = <2>; + thc63lvd1024_out: endpoint { + remote-endpoint = <&adv7511_in>; + }; }; }; }; @@ -101,76 +104,86 @@ regulator-always-on; }; - x12_clk: x12 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <74250000>; - }; -}; - -&extal_clk { - clock-frequency = <48000000>; -}; + vga { + compatible = "vga-connector"; -&pfc { - avb0_pins: avb { - mux { - groups = "avb0_link", "avb0_mdio", "avb0_mii"; - function = "avb0"; + port { + vga_in: endpoint { + remote-endpoint = <&adv7123_out>; + }; }; }; - du_pins: du { - groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0"; - function = "du"; - }; + vga-encoder { + compatible = "adi,adv7123"; - i2c0_pins: i2c0 { - groups = "i2c0"; - function = "i2c0"; - }; + ports { + #address-cells = <1>; + #size-cells = <0>; - i2c1_pins: i2c1 { - groups = "i2c1"; - function = "i2c1"; + port@0 { + reg = <0>; + adv7123_in: endpoint { + remote-endpoint = <&du_out_rgb>; + }; + }; + port@1 { + reg = <1>; + adv7123_out: endpoint { + remote-endpoint = <&vga_in>; + }; + }; + }; }; - pwm0_pins: pwm0 { - groups = "pwm0_c"; - function = "pwm0"; + x12_clk: x12 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <74250000>; }; +}; - pwm1_pins: pwm1 { - groups = "pwm1_c"; - function = "pwm1"; - }; +&avb { + pinctrl-0 = <&avb0_pins>; + pinctrl-names = "default"; + renesas,no-ether-link; + phy-handle = <&phy0>; + phy-mode = "rgmii-txid"; + status = "okay"; - scif2_pins: scif2 { - groups = "scif2_data"; - function = "scif2"; + phy0: ethernet-phy@0 { + rxc-skew-ps = <1500>; + reg = <0>; + interrupt-parent = <&gpio5>; + interrupts = <19 IRQ_TYPE_LEVEL_LOW>; }; +}; - sdhi2_pins: sd2 { - groups = "mmc_data8", "mmc_ctrl"; - function = "mmc"; - power-source = <1800>; - }; +&du { + pinctrl-0 = <&du_pins>; + pinctrl-names = "default"; + status = "okay"; - sdhi2_pins_uhs: sd2_uhs { - groups = "mmc_data8", "mmc_ctrl"; - function = "mmc"; - power-source = <1800>; - }; + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>, + <&x12_clk>; + clock-names = "du.0", "du.1", "dclkin.0"; - usb0_pins: usb0 { - groups = "usb0"; - function = "usb0"; + ports { + port@0 { + endpoint { + remote-endpoint = <&adv7123_in>; + }; + }; }; +}; - vin4_pins_cvbs: vin4 { - groups = "vin4_data8", "vin4_sync", "vin4_clk"; - function = "vin4"; - }; +&ehci0 { + status = "okay"; +}; + +&extal_clk { + clock-frequency = <48000000>; }; &i2c0 { @@ -178,12 +191,6 @@ pinctrl-names = "default"; status = "okay"; - eeprom@50 { - compatible = "rohm,br24t01", "atmel,24c01"; - reg = <0x50>; - pagesize = <8>; - }; - composite-in@20 { compatible = "adi,adv7180cp"; reg = <0x20>; @@ -218,6 +225,43 @@ }; + hdmi-encoder@39 { + compatible = "adi,adv7511w"; + reg = <0x39>, <0x3f>, <0x38>, <0x3c>; + reg-names = "main", "edid", "packet", "cec"; + interrupt-parent = <&gpio1>; + interrupts = <28 IRQ_TYPE_LEVEL_LOW>; + + /* Depends on LVDS */ + max-clock = <135000000>; + min-vrefresh = <50>; + + adi,input-depth = <8>; + adi,input-colorspace = "rgb"; + adi,input-clock = "1x"; + adi,input-style = <1>; + adi,input-justification = "evenly"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7511_in: endpoint { + remote-endpoint = <&thc63lvd1024_out>; + }; + }; + + port@1 { + reg = <1>; + adv7511_out: endpoint { + remote-endpoint = <&hdmi_con_out>; + }; + }; + }; + }; + hdmi-decoder@4c { compatible = "adi,adv7612"; reg = <0x4c>; @@ -254,6 +298,12 @@ }; }; }; + + eeprom@50 { + compatible = "rohm,br24t01", "atmel,24c01"; + reg = <0x50>; + pagesize = <8>; + }; }; &i2c1 { @@ -262,47 +312,112 @@ status = "okay"; }; -&du { - pinctrl-0 = <&du_pins>; - pinctrl-names = "default"; +&lvds0 { status = "okay"; - clocks = <&cpg CPG_MOD 724>, - <&cpg CPG_MOD 723>, - <&x12_clk>; - clock-names = "du.0", "du.1", "dclkin.0"; + clocks = <&cpg CPG_MOD 727>, + <&x12_clk>, + <&extal_clk>; + clock-names = "fck", "dclkin.0", "extal"; ports { - port@0 { - endpoint { - remote-endpoint = <&adv7123_in>; + port@1 { + lvds0_out: endpoint { + remote-endpoint = <&thc63lvd1024_in>; }; }; }; }; -&ehci0 { - status = "okay"; +&lvds1 { + clocks = <&cpg CPG_MOD 727>, + <&x12_clk>, + <&extal_clk>; + clock-names = "fck", "dclkin.0", "extal"; }; &ohci0 { status = "okay"; }; -&avb { - pinctrl-0 = <&avb0_pins>; +&pfc { + avb0_pins: avb { + mux { + groups = "avb0_link", "avb0_mdio", "avb0_mii"; + function = "avb0"; + }; + }; + + du_pins: du { + groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0"; + function = "du"; + }; + + i2c0_pins: i2c0 { + groups = "i2c0"; + function = "i2c0"; + }; + + i2c1_pins: i2c1 { + groups = "i2c1"; + function = "i2c1"; + }; + + pwm0_pins: pwm0 { + groups = "pwm0_c"; + function = "pwm0"; + }; + + pwm1_pins: pwm1 { + groups = "pwm1_c"; + function = "pwm1"; + }; + + scif2_pins: scif2 { + groups = "scif2_data"; + function = "scif2"; + }; + + sdhi2_pins: sd2 { + groups = "mmc_data8", "mmc_ctrl"; + function = "mmc"; + power-source = <1800>; + }; + + sdhi2_pins_uhs: sd2_uhs { + groups = "mmc_data8", "mmc_ctrl"; + function = "mmc"; + power-source = <1800>; + }; + + usb0_pins: usb0 { + groups = "usb0"; + function = "usb0"; + }; + + vin4_pins_cvbs: vin4 { + groups = "vin4_data8", "vin4_sync", "vin4_clk"; + function = "vin4"; + }; +}; + +&pwm0 { + pinctrl-0 = <&pwm0_pins>; pinctrl-names = "default"; - renesas,no-ether-link; - phy-handle = <&phy0>; - phy-mode = "rgmii-txid"; + status = "okay"; +}; - phy0: ethernet-phy@0 { - rxc-skew-ps = <1500>; - reg = <0>; - interrupt-parent = <&gpio5>; - interrupts = <19 IRQ_TYPE_LEVEL_LOW>; - }; +&pwm1 { + pinctrl-0 = <&pwm1_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&rwdt { + timeout-sec = <60>; + status = "okay"; }; &scif2 { @@ -333,25 +448,6 @@ status = "okay"; }; -&pwm0 { - pinctrl-0 = <&pwm0_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&pwm1 { - pinctrl-0 = <&pwm1_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&rwdt { - timeout-sec = <60>; - status = "okay"; -}; - &vin4 { pinctrl-0 = <&vin4_pins_cvbs>; pinctrl-names = "default"; diff --git a/dts/src/arm64/renesas/r8a77995.dtsi b/dts/src/arm64/renesas/r8a77995.dtsi index fe77bc43c4..214f4954b3 100644 --- a/dts/src/arm64/renesas/r8a77995.dtsi +++ b/dts/src/arm64/renesas/r8a77995.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source for the r8a77995 SoC + * Device Tree Source for the R-Car D3 (R8A77995) SoC * * Copyright (C) 2016 Renesas Electronics Corp. * Copyright (C) 2017 Glider bvba @@ -391,6 +391,10 @@ resets = <&cpg 219>; #dma-cells = <1>; dma-channels = <8>; + iommus = <&ipmmu_ds0 0>, <&ipmmu_ds0 1>, + <&ipmmu_ds0 2>, <&ipmmu_ds0 3>, + <&ipmmu_ds0 4>, <&ipmmu_ds0 5>, + <&ipmmu_ds0 6>, <&ipmmu_ds0 7>; }; dmac1: dma-controller@e7300000 { @@ -415,6 +419,10 @@ resets = <&cpg 218>; #dma-cells = <1>; dma-channels = <8>; + iommus = <&ipmmu_ds1 0>, <&ipmmu_ds1 1>, + <&ipmmu_ds1 2>, <&ipmmu_ds1 3>, + <&ipmmu_ds1 4>, <&ipmmu_ds1 5>, + <&ipmmu_ds1 6>, <&ipmmu_ds1 7>; }; dmac2: dma-controller@e7310000 { @@ -439,6 +447,10 @@ resets = <&cpg 217>; #dma-cells = <1>; dma-channels = <8>; + iommus = <&ipmmu_ds1 16>, <&ipmmu_ds1 17>, + <&ipmmu_ds1 18>, <&ipmmu_ds1 19>, + <&ipmmu_ds1 20>, <&ipmmu_ds1 21>, + <&ipmmu_ds1 22>, <&ipmmu_ds1 23>; }; ipmmu_ds0: mmu@e6740000 { @@ -817,11 +829,11 @@ compatible = "generic-ohci"; reg = <0 0xee080000 0 0x100>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 703>; + clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; phys = <&usb2_phy0>; phy-names = "usb"; power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; - resets = <&cpg 703>; + resets = <&cpg 703>, <&cpg 704>; status = "disabled"; }; @@ -829,12 +841,12 @@ compatible = "generic-ehci"; reg = <0 0xee080100 0 0x100>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 703>; + clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; phys = <&usb2_phy0>; phy-names = "usb"; companion = <&ohci0>; power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; - resets = <&cpg 703>; + resets = <&cpg 703>, <&cpg 704>; status = "disabled"; }; @@ -843,9 +855,9 @@ "renesas,rcar-gen3-usb2-phy"; reg = <0 0xee080200 0 0x700>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 703>; + clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; - resets = <&cpg 703>; + resets = <&cpg 703>, <&cpg 704>; #phy-cells = <0>; status = "disabled"; }; @@ -960,12 +972,68 @@ port@1 { reg = <1>; du_out_lvds0: endpoint { + remote-endpoint = <&lvds0_in>; }; }; port@2 { reg = <2>; du_out_lvds1: endpoint { + remote-endpoint = <&lvds1_in>; + }; + }; + }; + }; + + lvds0: lvds-encoder@feb90000 { + compatible = "renesas,r8a77995-lvds"; + reg = <0 0xfeb90000 0 0x20>; + clocks = <&cpg CPG_MOD 727>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 727>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + lvds0_in: endpoint { + remote-endpoint = <&du_out_lvds0>; + }; + }; + + port@1 { + reg = <1>; + lvds0_out: endpoint { + }; + }; + }; + }; + + lvds1: lvds-encoder@feb90100 { + compatible = "renesas,r8a77995-lvds"; + reg = <0 0xfeb90100 0 0x20>; + clocks = <&cpg CPG_MOD 727>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 726>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + lvds1_in: endpoint { + remote-endpoint = <&du_out_lvds1>; + }; + }; + + port@1 { + reg = <1>; + lvds1_out: endpoint { }; }; }; diff --git a/dts/src/arm64/renesas/salvator-common.dtsi b/dts/src/arm64/renesas/salvator-common.dtsi index 7d3d866a00..7f91ff5241 100644 --- a/dts/src/arm64/renesas/salvator-common.dtsi +++ b/dts/src/arm64/renesas/salvator-common.dtsi @@ -420,7 +420,10 @@ video-receiver@70 { compatible = "adi,adv7482"; - reg = <0x70>; + reg = <0x70 0x71 0x72 0x73 0x74 0x75 + 0x60 0x61 0x62 0x63 0x64 0x65>; + reg-names = "main", "dpll", "cp", "hdmi", "edid", "repeater", + "infoframe", "cbus", "cec", "sdp", "txa", "txb" ; #address-cells = <1>; #size-cells = <0>; @@ -471,6 +474,8 @@ &i2c_dvfs { status = "okay"; + clock-frequency = <400000>; + pmic: pmic@30 { pinctrl-0 = <&irq0_pins>; pinctrl-names = "default"; @@ -748,6 +753,7 @@ wp-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>; bus-width = <4>; sd-uhs-sdr50; + sd-uhs-sdr104; status = "okay"; }; @@ -777,6 +783,7 @@ wp-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>; bus-width = <4>; sd-uhs-sdr50; + sd-uhs-sdr104; status = "okay"; }; diff --git a/dts/src/arm64/renesas/ulcb-kf.dtsi b/dts/src/arm64/renesas/ulcb-kf.dtsi index 8bf3091a89..1b316d79df 100644 --- a/dts/src/arm64/renesas/ulcb-kf.dtsi +++ b/dts/src/arm64/renesas/ulcb-kf.dtsi @@ -127,7 +127,7 @@ #address-cells = <1>; #size-cells = <0>; reg = <0x71>; - reset-gpios= <&gpio3 15 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>; }; }; diff --git a/dts/src/arm64/renesas/ulcb.dtsi b/dts/src/arm64/renesas/ulcb.dtsi index 0ead552d7e..89daca7356 100644 --- a/dts/src/arm64/renesas/ulcb.dtsi +++ b/dts/src/arm64/renesas/ulcb.dtsi @@ -18,6 +18,7 @@ }; chosen { + bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; stdout-path = "serial0:115200n8"; }; @@ -241,6 +242,8 @@ &i2c_dvfs { status = "okay"; + clock-frequency = <400000>; + pmic: pmic@30 { pinctrl-0 = <&irq0_pins>; pinctrl-names = "default"; @@ -416,6 +419,7 @@ cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>; bus-width = <4>; sd-uhs-sdr50; + sd-uhs-sdr104; status = "okay"; }; diff --git a/dts/src/arm64/rockchip/px30-evb.dts b/dts/src/arm64/rockchip/px30-evb.dts new file mode 100644 index 0000000000..263d7f3dbc --- /dev/null +++ b/dts/src/arm64/rockchip/px30-evb.dts @@ -0,0 +1,235 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2018 Fuzhou Rockchip Electronics Co., Ltd + */ + +/dts-v1/; +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include "px30.dtsi" + +/ { + model = "Rockchip PX30 EVB"; + compatible = "rockchip,px30-evb", "rockchip,px30"; + + chosen { + stdout-path = "serial2:1500000n8"; + }; + + adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 2>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1800000>; + poll-interval = <100>; + + esc-key { + label = "esc"; + linux,code = <KEY_ESC>; + press-threshold-microvolt = <1310000>; + }; + + home-key { + label = "home"; + linux,code = <KEY_HOME>; + press-threshold-microvolt = <624000>; + }; + + menu-key { + label = "menu"; + linux,code = <KEY_MENU>; + press-threshold-microvolt = <987000>; + }; + + vol-down-key { + label = "volume down"; + linux,code = <KEY_VOLUMEDOWN>; + press-threshold-microvolt = <300000>; + }; + + vol-up-key { + label = "volume up"; + linux,code = <KEY_VOLUMEUP>; + press-threshold-microvolt = <17000>; + }; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 25000 0>; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_enable_h>; + + /* + * On the module itself this is one of these (depending + * on the actual card populated): + * - SDIO_RESET_L_WL_REG_ON + * - PDN (power down when low) + */ + reset-gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>; /* GPIO3_A4 */ + }; + + vcc_phy: vcc-phy-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_phy"; + regulator-always-on; + regulator-boot-on; + }; + + vcc5v0_sys: vccsys { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; +}; + +&display_subsystem { + status = "okay"; +}; + +&emmc { + bus-width = <8>; + cap-mmc-highspeed; + mmc-hs200-1_8v; + non-removable; + status = "okay"; +}; + +&gmac { + clock_in_out = "output"; + phy-supply = <&vcc_phy>; + snps,reset-gpio = <&gpio2 13 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + snps,reset-delays-us = <0 50000 50000>; + status = "okay"; +}; + +&i2c0 { + status = "okay"; +}; + +&i2s1_2ch { + status = "okay"; +}; + +&io_domains { + status = "okay"; +}; + +&pinctrl { + headphone { + hp_det: hp-det { + rockchip,pins = + <2 RK_PB0 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + + pmic { + pmic_int: pmic_int { + rockchip,pins = + <0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + soc_slppin_gpio: soc_slppin_gpio { + rockchip,pins = + <0 RK_PA4 RK_FUNC_GPIO &pcfg_output_low>; + }; + + soc_slppin_slp: soc_slppin_slp { + rockchip,pins = + <0 RK_PA4 RK_FUNC_1 &pcfg_pull_none>; + }; + + soc_slppin_rst: soc_slppin_rst { + rockchip,pins = + <0 RK_PA4 RK_FUNC_2 &pcfg_pull_none>; + }; + }; + + sdio-pwrseq { + wifi_enable_h: wifi-enable-h { + rockchip,pins = + <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pmu_io_domains { + status = "okay"; +}; + +&pwm1 { + status = "okay"; +}; + +&saradc { + status = "okay"; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + card-detect-delay = <800>; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-sdr104; + status = "okay"; +}; + +&sdio { + bus-width = <4>; + cap-sd-highspeed; + keep-power-in-suspend; + non-removable; + mmc-pwrseq = <&sdio_pwrseq>; + sd-uhs-sdr104; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_xfer &uart1_cts>; + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&usb20_otg { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&vopb { + status = "okay"; +}; + +&vopb_mmu { + status = "okay"; +}; + +&vopl { + status = "okay"; +}; + +&vopl_mmu { + status = "okay"; +}; diff --git a/dts/src/arm64/rockchip/px30.dtsi b/dts/src/arm64/rockchip/px30.dtsi new file mode 100644 index 0000000000..9aa8d5ef9e --- /dev/null +++ b/dts/src/arm64/rockchip/px30.dtsi @@ -0,0 +1,2047 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2018 Fuzhou Rockchip Electronics Co., Ltd + */ + +#include <dt-bindings/clock/px30-cru.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include <dt-bindings/power/px30-power.h> +#include <dt-bindings/soc/rockchip,boot-mode.h> + +/ { + compatible = "rockchip,px30"; + + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + ethernet0 = &gmac; + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; + serial4 = &uart4; + serial5 = &uart5; + spi0 = &spi0; + spi1 = &spi1; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a35", "arm,armv8"; + reg = <0x0 0x0>; + enable-method = "psci"; + clocks = <&cru ARMCLK>; + #cooling-cells = <2>; + cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; + dynamic-power-coefficient = <90>; + operating-points-v2 = <&cpu0_opp_table>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a35", "arm,armv8"; + reg = <0x0 0x1>; + enable-method = "psci"; + clocks = <&cru ARMCLK>; + #cooling-cells = <2>; + cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; + dynamic-power-coefficient = <90>; + operating-points-v2 = <&cpu0_opp_table>; + }; + + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a35", "arm,armv8"; + reg = <0x0 0x2>; + enable-method = "psci"; + clocks = <&cru ARMCLK>; + #cooling-cells = <2>; + cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; + dynamic-power-coefficient = <90>; + operating-points-v2 = <&cpu0_opp_table>; + }; + + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a35", "arm,armv8"; + reg = <0x0 0x3>; + enable-method = "psci"; + clocks = <&cru ARMCLK>; + #cooling-cells = <2>; + cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; + dynamic-power-coefficient = <90>; + operating-points-v2 = <&cpu0_opp_table>; + }; + + idle-states { + entry-method = "psci"; + + CPU_SLEEP: cpu-sleep { + compatible = "arm,idle-state"; + local-timer-stop; + arm,psci-suspend-param = <0x0010000>; + entry-latency-us = <120>; + exit-latency-us = <250>; + min-residency-us = <900>; + }; + + CLUSTER_SLEEP: cluster-sleep { + compatible = "arm,idle-state"; + local-timer-stop; + arm,psci-suspend-param = <0x1010000>; + entry-latency-us = <400>; + exit-latency-us = <500>; + min-residency-us = <2000>; + }; + }; + }; + + cpu0_opp_table: cpu0-opp-table { + compatible = "operating-points-v2"; + opp-shared; + + opp-408000000 { + opp-hz = /bits/ 64 <408000000>; + opp-microvolt = <950000 950000 1350000>; + clock-latency-ns = <40000>; + opp-suspend; + }; + opp-600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <950000 950000 1350000>; + clock-latency-ns = <40000>; + }; + opp-816000000 { + opp-hz = /bits/ 64 <816000000>; + opp-microvolt = <1050000 1050000 1350000>; + clock-latency-ns = <40000>; + }; + opp-1008000000 { + opp-hz = /bits/ 64 <1008000000>; + opp-microvolt = <1175000 1175000 1350000>; + clock-latency-ns = <40000>; + }; + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <1300000 1300000 1350000>; + clock-latency-ns = <40000>; + }; + opp-1296000000 { + opp-hz = /bits/ 64 <1296000000>; + opp-microvolt = <1350000 1350000 1350000>; + clock-latency-ns = <40000>; + }; + }; + + arm-pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; + }; + + display_subsystem: display-subsystem { + compatible = "rockchip,display-subsystem"; + ports = <&vopb_out>, <&vopl_out>; + status = "disabled"; + }; + + firmware { + optee { + compatible = "linaro,optee-tz"; + method = "smc"; + }; + }; + + gmac_clkin: external-gmac-clock { + compatible = "fixed-clock"; + clock-frequency = <50000000>; + clock-output-names = "gmac_clkin"; + #clock-cells = <0>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + xin24m: xin24m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + clock-output-names = "xin24m"; + }; + + xin32k: xin32k { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "xin32k"; + }; + + pmu: power-management@ff000000 { + compatible = "rockchip,px30-pmu", "syscon", "simple-mfd"; + reg = <0x0 0xff000000 0x0 0x1000>; + + power: power-controller { + compatible = "rockchip,px30-power-controller"; + #power-domain-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + + /* These power domains are grouped by VD_LOGIC */ + pd_usb@PX30_PD_USB { + reg = <PX30_PD_USB>; + clocks = <&cru HCLK_HOST>, + <&cru HCLK_OTG>, + <&cru SCLK_OTG_ADP>; + pm_qos = <&qos_usb_host>, <&qos_usb_otg>; + }; + pd_sdcard@PX30_PD_SDCARD { + reg = <PX30_PD_SDCARD>; + clocks = <&cru HCLK_SDMMC>, + <&cru SCLK_SDMMC>; + pm_qos = <&qos_sdmmc>; + }; + pd_gmac@PX30_PD_GMAC { + reg = <PX30_PD_GMAC>; + clocks = <&cru ACLK_GMAC>, + <&cru PCLK_GMAC>, + <&cru SCLK_MAC_REF>, + <&cru SCLK_GMAC_RX_TX>; + pm_qos = <&qos_gmac>; + }; + pd_mmc_nand@PX30_PD_MMC_NAND { + reg = <PX30_PD_MMC_NAND>; + clocks = <&cru HCLK_NANDC>, + <&cru HCLK_EMMC>, + <&cru HCLK_SDIO>, + <&cru HCLK_SFC>, + <&cru SCLK_EMMC>, + <&cru SCLK_NANDC>, + <&cru SCLK_SDIO>, + <&cru SCLK_SFC>; + pm_qos = <&qos_emmc>, <&qos_nand>, + <&qos_sdio>, <&qos_sfc>; + }; + pd_vpu@PX30_PD_VPU { + reg = <PX30_PD_VPU>; + clocks = <&cru ACLK_VPU>, + <&cru HCLK_VPU>, + <&cru SCLK_CORE_VPU>; + pm_qos = <&qos_vpu>, <&qos_vpu_r128>; + }; + pd_vo@PX30_PD_VO { + reg = <PX30_PD_VO>; + clocks = <&cru ACLK_RGA>, + <&cru ACLK_VOPB>, + <&cru ACLK_VOPL>, + <&cru DCLK_VOPB>, + <&cru DCLK_VOPL>, + <&cru HCLK_RGA>, + <&cru HCLK_VOPB>, + <&cru HCLK_VOPL>, + <&cru PCLK_MIPI_DSI>, + <&cru SCLK_RGA_CORE>, + <&cru SCLK_VOPB_PWM>; + pm_qos = <&qos_rga_rd>, <&qos_rga_wr>, + <&qos_vop_m0>, <&qos_vop_m1>; + }; + pd_vi@PX30_PD_VI { + reg = <PX30_PD_VI>; + clocks = <&cru ACLK_CIF>, + <&cru ACLK_ISP>, + <&cru HCLK_CIF>, + <&cru HCLK_ISP>, + <&cru SCLK_ISP>; + pm_qos = <&qos_isp_128>, <&qos_isp_rd>, + <&qos_isp_wr>, <&qos_isp_m1>, + <&qos_vip>; + }; + pd_gpu@PX30_PD_GPU { + reg = <PX30_PD_GPU>; + clocks = <&cru SCLK_GPU>; + pm_qos = <&qos_gpu>; + }; + }; + }; + + pmugrf: syscon@ff010000 { + compatible = "rockchip,px30-pmugrf", "syscon", "simple-mfd"; + reg = <0x0 0xff010000 0x0 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + + pmu_io_domains: io-domains { + compatible = "rockchip,px30-pmu-io-voltage-domain"; + status = "disabled"; + }; + + reboot-mode { + compatible = "syscon-reboot-mode"; + offset = <0x200>; + mode-bootloader = <BOOT_BL_DOWNLOAD>; + mode-fastboot = <BOOT_FASTBOOT>; + mode-loader = <BOOT_BL_DOWNLOAD>; + mode-normal = <BOOT_NORMAL>; + mode-recovery = <BOOT_RECOVERY>; + }; + }; + + uart0: serial@ff030000 { + compatible = "rockchip,px30-uart", "snps,dw-apb-uart"; + reg = <0x0 0xff030000 0x0 0x100>; + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmucru SCLK_UART0_PMU>, <&pmucru PCLK_UART0_PMU>; + clock-names = "baudclk", "apb_pclk"; + dmas = <&dmac 0>, <&dmac 1>; + dma-names = "tx", "rx"; + reg-shift = <2>; + reg-io-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; + status = "disabled"; + }; + + i2s1_2ch: i2s@ff070000 { + compatible = "rockchip,px30-i2s", "rockchip,rk3066-i2s"; + reg = <0x0 0xff070000 0x0 0x1000>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_I2S1>, <&cru HCLK_I2S1>; + clock-names = "i2s_clk", "i2s_hclk"; + dmas = <&dmac 18>, <&dmac 19>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&i2s1_2ch_sclk &i2s1_2ch_lrck + &i2s1_2ch_sdi &i2s1_2ch_sdo>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + i2s2_2ch: i2s@ff080000 { + compatible = "rockchip,px30-i2s", "rockchip,rk3066-i2s"; + reg = <0x0 0xff080000 0x0 0x1000>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_I2S2>, <&cru HCLK_I2S2>; + clock-names = "i2s_clk", "i2s_hclk"; + dmas = <&dmac 20>, <&dmac 21>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&i2s2_2ch_sclk &i2s2_2ch_lrck + &i2s2_2ch_sdi &i2s2_2ch_sdo>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + gic: interrupt-controller@ff131000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x0 0xff131000 0 0x1000>, + <0x0 0xff132000 0 0x2000>, + <0x0 0xff134000 0 0x2000>, + <0x0 0xff136000 0 0x2000>; + interrupts = <GIC_PPI 9 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + grf: syscon@ff140000 { + compatible = "rockchip,px30-grf", "syscon", "simple-mfd"; + reg = <0x0 0xff140000 0x0 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + + io_domains: io-domains { + compatible = "rockchip,px30-io-voltage-domain"; + status = "disabled"; + }; + }; + + uart1: serial@ff158000 { + compatible = "rockchip,px30-uart", "snps,dw-apb-uart"; + reg = <0x0 0xff158000 0x0 0x100>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>; + clock-names = "baudclk", "apb_pclk"; + dmas = <&dmac 2>, <&dmac 3>; + dma-names = "tx", "rx"; + reg-shift = <2>; + reg-io-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&uart1_xfer &uart1_cts &uart1_rts>; + status = "disabled"; + }; + + uart2: serial@ff160000 { + compatible = "rockchip,px30-uart", "snps,dw-apb-uart"; + reg = <0x0 0xff160000 0x0 0x100>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>; + clock-names = "baudclk", "apb_pclk"; + dmas = <&dmac 4>, <&dmac 5>; + dma-names = "tx", "rx"; + reg-shift = <2>; + reg-io-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&uart2m0_xfer>; + status = "disabled"; + }; + + uart3: serial@ff168000 { + compatible = "rockchip,px30-uart", "snps,dw-apb-uart"; + reg = <0x0 0xff168000 0x0 0x100>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>; + clock-names = "baudclk", "apb_pclk"; + dmas = <&dmac 6>, <&dmac 7>; + dma-names = "tx", "rx"; + reg-shift = <2>; + reg-io-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&uart3m1_xfer &uart3m1_cts &uart3m1_rts>; + status = "disabled"; + }; + + uart4: serial@ff170000 { + compatible = "rockchip,px30-uart", "snps,dw-apb-uart"; + reg = <0x0 0xff170000 0x0 0x100>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_UART4>, <&cru PCLK_UART4>; + clock-names = "baudclk", "apb_pclk"; + dmas = <&dmac 8>, <&dmac 9>; + dma-names = "tx", "rx"; + reg-shift = <2>; + reg-io-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&uart4_xfer &uart4_cts &uart4_rts>; + status = "disabled"; + }; + + uart5: serial@ff178000 { + compatible = "rockchip,px30-uart", "snps,dw-apb-uart"; + reg = <0x0 0xff178000 0x0 0x100>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_UART5>, <&cru PCLK_UART5>; + clock-names = "baudclk", "apb_pclk"; + dmas = <&dmac 10>, <&dmac 11>; + dma-names = "tx", "rx"; + reg-shift = <2>; + reg-io-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&uart5_xfer &uart5_cts &uart5_rts>; + status = "disabled"; + }; + + i2c0: i2c@ff180000 { + compatible = "rockchip,px30-i2c", "rockchip,rk3399-i2c"; + reg = <0x0 0xff180000 0x0 0x1000>; + clocks = <&cru SCLK_I2C0>, <&cru PCLK_I2C0>; + clock-names = "i2c", "pclk"; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_xfer>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@ff190000 { + compatible = "rockchip,px30-i2c", "rockchip,rk3399-i2c"; + reg = <0x0 0xff190000 0x0 0x1000>; + clocks = <&cru SCLK_I2C1>, <&cru PCLK_I2C1>; + clock-names = "i2c", "pclk"; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_xfer>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@ff1a0000 { + compatible = "rockchip,px30-i2c", "rockchip,rk3399-i2c"; + reg = <0x0 0xff1a0000 0x0 0x1000>; + clocks = <&cru SCLK_I2C2>, <&cru PCLK_I2C2>; + clock-names = "i2c", "pclk"; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_xfer>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@ff1b0000 { + compatible = "rockchip,px30-i2c", "rockchip,rk3399-i2c"; + reg = <0x0 0xff1b0000 0x0 0x1000>; + clocks = <&cru SCLK_I2C3>, <&cru PCLK_I2C3>; + clock-names = "i2c", "pclk"; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_xfer>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi0: spi@ff1d0000 { + compatible = "rockchip,px30-spi", "rockchip,rk3066-spi"; + reg = <0x0 0xff1d0000 0x0 0x1000>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>; + clock-names = "spiclk", "apb_pclk"; + dmas = <&dmac 12>, <&dmac 13>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&spi0_clk &spi0_csn &spi0_miso &spi0_mosi>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi1: spi@ff1d8000 { + compatible = "rockchip,px30-spi", "rockchip,rk3066-spi"; + reg = <0x0 0xff1d8000 0x0 0x1000>; + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_SPI1>, <&cru PCLK_SPI1>; + clock-names = "spiclk", "apb_pclk"; + dmas = <&dmac 14>, <&dmac 15>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&spi1_clk &spi1_csn0 &spi1_csn1 &spi1_miso &spi1_mosi>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + wdt: watchdog@ff1e0000 { + compatible = "snps,dw-wdt"; + reg = <0x0 0xff1e0000 0x0 0x100>; + clocks = <&cru PCLK_WDT_NS>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + pwm0: pwm@ff200000 { + compatible = "rockchip,px30-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xff200000 0x0 0x10>; + clocks = <&cru SCLK_PWM0>, <&cru PCLK_PWM0>; + clock-names = "pwm", "pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_pin>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm1: pwm@ff200010 { + compatible = "rockchip,px30-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xff200010 0x0 0x10>; + clocks = <&cru SCLK_PWM0>, <&cru PCLK_PWM0>; + clock-names = "pwm", "pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&pwm1_pin>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm2: pwm@ff200020 { + compatible = "rockchip,px30-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xff200020 0x0 0x10>; + clocks = <&cru SCLK_PWM0>, <&cru PCLK_PWM0>; + clock-names = "pwm", "pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&pwm2_pin>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm3: pwm@ff200030 { + compatible = "rockchip,px30-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xff200030 0x0 0x10>; + clocks = <&cru SCLK_PWM0>, <&cru PCLK_PWM0>; + clock-names = "pwm", "pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&pwm3_pin>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm4: pwm@ff208000 { + compatible = "rockchip,px30-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xff208000 0x0 0x10>; + clocks = <&cru SCLK_PWM1>, <&cru PCLK_PWM1>; + clock-names = "pwm", "pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&pwm4_pin>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm5: pwm@ff208010 { + compatible = "rockchip,px30-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xff208010 0x0 0x10>; + clocks = <&cru SCLK_PWM1>, <&cru PCLK_PWM1>; + clock-names = "pwm", "pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&pwm5_pin>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm6: pwm@ff208020 { + compatible = "rockchip,px30-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xff208020 0x0 0x10>; + clocks = <&cru SCLK_PWM1>, <&cru PCLK_PWM1>; + clock-names = "pwm", "pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&pwm6_pin>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm7: pwm@ff208030 { + compatible = "rockchip,px30-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xff208030 0x0 0x10>; + clocks = <&cru SCLK_PWM1>, <&cru PCLK_PWM1>; + clock-names = "pwm", "pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&pwm7_pin>; + #pwm-cells = <3>; + status = "disabled"; + }; + + rktimer: timer@ff210000 { + compatible = "rockchip,px30-timer", "rockchip,rk3288-timer"; + reg = <0x0 0xff210000 0x0 0x1000>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_TIMER>, <&cru SCLK_TIMER0>; + clock-names = "pclk", "timer"; + }; + + amba { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + dmac: dmac@ff240000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x0 0xff240000 0x0 0x4000>; + interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru ACLK_DMAC>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + }; + }; + + saradc: saradc@ff288000 { + compatible = "rockchip,px30-saradc", "rockchip,rk3399-saradc"; + reg = <0x0 0xff288000 0x0 0x100>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; + #io-channel-cells = <1>; + clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>; + clock-names = "saradc", "apb_pclk"; + resets = <&cru SRST_SARADC_P>; + reset-names = "saradc-apb"; + status = "disabled"; + }; + + cru: clock-controller@ff2b0000 { + compatible = "rockchip,px30-cru"; + reg = <0x0 0xff2b0000 0x0 0x1000>; + rockchip,grf = <&grf>; + #clock-cells = <1>; + #reset-cells = <1>; + + assigned-clocks = <&cru PLL_NPLL>; + assigned-clock-rates = <1188000000>; + }; + + pmucru: clock-controller@ff2bc000 { + compatible = "rockchip,px30-pmucru"; + reg = <0x0 0xff2bc000 0x0 0x1000>; + rockchip,grf = <&grf>; + #clock-cells = <1>; + #reset-cells = <1>; + + assigned-clocks = + <&pmucru PLL_GPLL>, <&pmucru PCLK_PMU_PRE>, + <&pmucru SCLK_WIFI_PMU>, <&cru ARMCLK>, + <&cru ACLK_BUS_PRE>, <&cru ACLK_PERI_PRE>, + <&cru HCLK_BUS_PRE>, <&cru HCLK_PERI_PRE>, + <&cru PCLK_BUS_PRE>, <&cru SCLK_GPU>; + assigned-clock-rates = + <1200000000>, <100000000>, + <26000000>, <600000000>, + <200000000>, <200000000>, + <150000000>, <150000000>, + <100000000>, <200000000>; + }; + + usb20_otg: usb@ff300000 { + compatible = "rockchip,px30-usb", "rockchip,rk3066-usb", + "snps,dwc2"; + reg = <0x0 0xff300000 0x0 0x40000>; + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_OTG>; + clock-names = "otg"; + dr_mode = "otg"; + g-np-tx-fifo-size = <16>; + g-rx-fifo-size = <280>; + g-tx-fifo-size = <256 128 128 64 32 16>; + g-use-dma; + power-domains = <&power PX30_PD_USB>; + status = "disabled"; + }; + + usb_host0_ehci: usb@ff340000 { + compatible = "generic-ehci"; + reg = <0x0 0xff340000 0x0 0x10000>; + interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_HOST>; + clock-names = "usbhost"; + power-domains = <&power PX30_PD_USB>; + status = "disabled"; + }; + + usb_host0_ohci: usb@ff350000 { + compatible = "generic-ohci"; + reg = <0x0 0xff350000 0x0 0x10000>; + interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_HOST>; + clock-names = "usbhost"; + power-domains = <&power PX30_PD_USB>; + status = "disabled"; + }; + + gmac: ethernet@ff360000 { + compatible = "rockchip,px30-gmac"; + reg = <0x0 0xff360000 0x0 0x10000>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + clocks = <&cru SCLK_GMAC>, <&cru SCLK_GMAC_RX_TX>, + <&cru SCLK_GMAC_RX_TX>, <&cru SCLK_MAC_REF>, + <&cru SCLK_MAC_REFOUT>, <&cru ACLK_GMAC>, + <&cru PCLK_GMAC>, <&cru SCLK_GMAC_RMII>; + clock-names = "stmmaceth", "mac_clk_rx", + "mac_clk_tx", "clk_mac_ref", + "clk_mac_refout", "aclk_mac", + "pclk_mac", "clk_mac_speed"; + rockchip,grf = <&grf>; + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&rmii_pins &mac_refclk_12ma>; + power-domains = <&power PX30_PD_GMAC>; + resets = <&cru SRST_GMAC_A>; + reset-names = "stmmaceth"; + status = "disabled"; + }; + + sdmmc: dwmmc@ff370000 { + compatible = "rockchip,px30-dw-mshc", "rockchip,rk3288-dw-mshc"; + reg = <0x0 0xff370000 0x0 0x4000>; + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>, + <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>; + clock-names = "biu", "ciu", "ciu-drv", "ciu-sample"; + fifo-depth = <0x100>; + max-frequency = <150000000>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_det &sdmmc_bus4>; + power-domains = <&power PX30_PD_SDCARD>; + status = "disabled"; + }; + + sdio: dwmmc@ff380000 { + compatible = "rockchip,px30-dw-mshc", "rockchip,rk3288-dw-mshc"; + reg = <0x0 0xff380000 0x0 0x4000>; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>, + <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>; + clock-names = "biu", "ciu", "ciu-drv", "ciu-sample"; + fifo-depth = <0x100>; + max-frequency = <150000000>; + pinctrl-names = "default"; + pinctrl-0 = <&sdio_bus4 &sdio_cmd &sdio_clk>; + power-domains = <&power PX30_PD_MMC_NAND>; + status = "disabled"; + }; + + emmc: dwmmc@ff390000 { + compatible = "rockchip,px30-dw-mshc", "rockchip,rk3288-dw-mshc"; + reg = <0x0 0xff390000 0x0 0x4000>; + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>, + <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>; + clock-names = "biu", "ciu", "ciu-drv", "ciu-sample"; + fifo-depth = <0x100>; + max-frequency = <150000000>; + power-domains = <&power PX30_PD_MMC_NAND>; + status = "disabled"; + }; + + vopb: vop@ff460000 { + compatible = "rockchip,px30-vop-big"; + reg = <0x0 0xff460000 0x0 0xefc>; + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru ACLK_VOPB>, <&cru DCLK_VOPB>, + <&cru HCLK_VOPB>; + clock-names = "aclk_vop", "dclk_vop", "hclk_vop"; + resets = <&cru SRST_VOPB_A>, <&cru SRST_VOPB_H>, <&cru SRST_VOPB>; + reset-names = "axi", "ahb", "dclk"; + iommus = <&vopb_mmu>; + power-domains = <&power PX30_PD_VO>; + rockchip,grf = <&grf>; + status = "disabled"; + + vopb_out: port { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + vopb_mmu: iommu@ff460f00 { + compatible = "rockchip,iommu"; + reg = <0x0 0xff460f00 0x0 0x100>; + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "vopb_mmu"; + clocks = <&cru ACLK_VOPB>, <&cru HCLK_VOPB>; + clock-names = "aclk", "hclk"; + power-domains = <&power PX30_PD_VO>; + #iommu-cells = <0>; + status = "disabled"; + }; + + vopl: vop@ff470000 { + compatible = "rockchip,px30-vop-lit"; + reg = <0x0 0xff470000 0x0 0xefc>; + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru ACLK_VOPL>, <&cru DCLK_VOPL>, + <&cru HCLK_VOPL>; + clock-names = "aclk_vop", "dclk_vop", "hclk_vop"; + resets = <&cru SRST_VOPL_A>, <&cru SRST_VOPL_H>, <&cru SRST_VOPL>; + reset-names = "axi", "ahb", "dclk"; + iommus = <&vopl_mmu>; + power-domains = <&power PX30_PD_VO>; + rockchip,grf = <&grf>; + status = "disabled"; + + vopl_out: port { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + vopl_mmu: iommu@ff470f00 { + compatible = "rockchip,iommu"; + reg = <0x0 0xff470f00 0x0 0x100>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "vopl_mmu"; + clocks = <&cru ACLK_VOPL>, <&cru HCLK_VOPL>; + clock-names = "aclk", "hclk"; + power-domains = <&power PX30_PD_VO>; + #iommu-cells = <0>; + status = "disabled"; + }; + + qos_gmac: qos@ff518000 { + compatible = "syscon"; + reg = <0x0 0xff518000 0x0 0x20>; + }; + + qos_gpu: qos@ff520000 { + compatible = "syscon"; + reg = <0x0 0xff520000 0x0 0x20>; + }; + + qos_sdmmc: qos@ff52c000 { + compatible = "syscon"; + reg = <0x0 0xff52c000 0x0 0x20>; + }; + + qos_emmc: qos@ff538000 { + compatible = "syscon"; + reg = <0x0 0xff538000 0x0 0x20>; + }; + + qos_nand: qos@ff538080 { + compatible = "syscon"; + reg = <0x0 0xff538080 0x0 0x20>; + }; + + qos_sdio: qos@ff538100 { + compatible = "syscon"; + reg = <0x0 0xff538100 0x0 0x20>; + }; + + qos_sfc: qos@ff538180 { + compatible = "syscon"; + reg = <0x0 0xff538180 0x0 0x20>; + }; + + qos_usb_host: qos@ff540000 { + compatible = "syscon"; + reg = <0x0 0xff540000 0x0 0x20>; + }; + + qos_usb_otg: qos@ff540080 { + compatible = "syscon"; + reg = <0x0 0xff540080 0x0 0x20>; + }; + + qos_isp_128: qos@ff548000 { + compatible = "syscon"; + reg = <0x0 0xff548000 0x0 0x20>; + }; + + qos_isp_rd: qos@ff548080 { + compatible = "syscon"; + reg = <0x0 0xff548080 0x0 0x20>; + }; + + qos_isp_wr: qos@ff548100 { + compatible = "syscon"; + reg = <0x0 0xff548100 0x0 0x20>; + }; + + qos_isp_m1: qos@ff548180 { + compatible = "syscon"; + reg = <0x0 0xff548180 0x0 0x20>; + }; + + qos_vip: qos@ff548200 { + compatible = "syscon"; + reg = <0x0 0xff548200 0x0 0x20>; + }; + + qos_rga_rd: qos@ff550000 { + compatible = "syscon"; + reg = <0x0 0xff550000 0x0 0x20>; + }; + + qos_rga_wr: qos@ff550080 { + compatible = "syscon"; + reg = <0x0 0xff550080 0x0 0x20>; + }; + + qos_vop_m0: qos@ff550100 { + compatible = "syscon"; + reg = <0x0 0xff550100 0x0 0x20>; + }; + + qos_vop_m1: qos@ff550180 { + compatible = "syscon"; + reg = <0x0 0xff550180 0x0 0x20>; + }; + + qos_vpu: qos@ff558000 { + compatible = "syscon"; + reg = <0x0 0xff558000 0x0 0x20>; + }; + + qos_vpu_r128: qos@ff558080 { + compatible = "syscon"; + reg = <0x0 0xff558080 0x0 0x20>; + }; + + pinctrl: pinctrl { + compatible = "rockchip,px30-pinctrl"; + rockchip,grf = <&grf>; + rockchip,pmu = <&pmugrf>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gpio0: gpio0@ff040000 { + compatible = "rockchip,gpio-bank"; + reg = <0x0 0xff040000 0x0 0x100>; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmucru PCLK_GPIO0_PMU>; + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio1: gpio1@ff250000 { + compatible = "rockchip,gpio-bank"; + reg = <0x0 0xff250000 0x0 0x100>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_GPIO1>; + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio2@ff260000 { + compatible = "rockchip,gpio-bank"; + reg = <0x0 0xff260000 0x0 0x100>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_GPIO2>; + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio3@ff270000 { + compatible = "rockchip,gpio-bank"; + reg = <0x0 0xff270000 0x0 0x100>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_GPIO3>; + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + pcfg_pull_up: pcfg-pull-up { + bias-pull-up; + }; + + pcfg_pull_down: pcfg-pull-down { + bias-pull-down; + }; + + pcfg_pull_none: pcfg-pull-none { + bias-disable; + }; + + pcfg_pull_none_2ma: pcfg-pull-none-2ma { + bias-disable; + drive-strength = <2>; + }; + + pcfg_pull_up_2ma: pcfg-pull-up-2ma { + bias-pull-up; + drive-strength = <2>; + }; + + pcfg_pull_up_4ma: pcfg-pull-up-4ma { + bias-pull-up; + drive-strength = <4>; + }; + + pcfg_pull_none_4ma: pcfg-pull-none-4ma { + bias-disable; + drive-strength = <4>; + }; + + pcfg_pull_down_4ma: pcfg-pull-down-4ma { + bias-pull-down; + drive-strength = <4>; + }; + + pcfg_pull_none_8ma: pcfg-pull-none-8ma { + bias-disable; + drive-strength = <8>; + }; + + pcfg_pull_up_8ma: pcfg-pull-up-8ma { + bias-pull-up; + drive-strength = <8>; + }; + + pcfg_pull_none_12ma: pcfg-pull-none-12ma { + bias-disable; + drive-strength = <12>; + }; + + pcfg_pull_up_12ma: pcfg-pull-up-12ma { + bias-pull-up; + drive-strength = <12>; + }; + + pcfg_pull_none_smt: pcfg-pull-none-smt { + bias-disable; + input-schmitt-enable; + }; + + pcfg_output_high: pcfg-output-high { + output-high; + }; + + pcfg_output_low: pcfg-output-low { + output-low; + }; + + pcfg_input_high: pcfg-input-high { + bias-pull-up; + input-enable; + }; + + pcfg_input: pcfg-input { + input-enable; + }; + + i2c0 { + i2c0_xfer: i2c0-xfer { + rockchip,pins = + <0 RK_PB0 1 &pcfg_pull_none_smt>, + <0 RK_PB1 1 &pcfg_pull_none_smt>; + }; + }; + + i2c1 { + i2c1_xfer: i2c1-xfer { + rockchip,pins = + <0 RK_PC2 1 &pcfg_pull_none_smt>, + <0 RK_PC3 1 &pcfg_pull_none_smt>; + }; + }; + + i2c2 { + i2c2_xfer: i2c2-xfer { + rockchip,pins = + <2 RK_PB7 2 &pcfg_pull_none_smt>, + <2 RK_PC0 2 &pcfg_pull_none_smt>; + }; + }; + + i2c3 { + i2c3_xfer: i2c3-xfer { + rockchip,pins = + <1 RK_PB4 4 &pcfg_pull_none_smt>, + <1 RK_PB5 4 &pcfg_pull_none_smt>; + }; + }; + + tsadc { + tsadc_otp_gpio: tsadc-otp-gpio { + rockchip,pins = + <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + tsadc_otp_out: tsadc-otp-out { + rockchip,pins = + <0 RK_PA6 1 &pcfg_pull_none>; + }; + }; + + uart0 { + uart0_xfer: uart0-xfer { + rockchip,pins = + <0 RK_PB2 1 &pcfg_pull_up>, + <0 RK_PB3 1 &pcfg_pull_up>; + }; + + uart0_cts: uart0-cts { + rockchip,pins = + <0 RK_PB4 1 &pcfg_pull_none>; + }; + + uart0_rts: uart0-rts { + rockchip,pins = + <0 RK_PB5 1 &pcfg_pull_none>; + }; + + uart0_rts_gpio: uart0-rts-gpio { + rockchip,pins = + <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + uart1 { + uart1_xfer: uart1-xfer { + rockchip,pins = + <1 RK_PC1 1 &pcfg_pull_up>, + <1 RK_PC0 1 &pcfg_pull_up>; + }; + + uart1_cts: uart1-cts { + rockchip,pins = + <1 RK_PC2 1 &pcfg_pull_none>; + }; + + uart1_rts: uart1-rts { + rockchip,pins = + <1 RK_PC3 1 &pcfg_pull_none>; + }; + + uart1_rts_gpio: uart1-rts-gpio { + rockchip,pins = + <1 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + uart2-m0 { + uart2m0_xfer: uart2m0-xfer { + rockchip,pins = + <1 RK_PD2 2 &pcfg_pull_up>, + <1 RK_PD3 2 &pcfg_pull_up>; + }; + }; + + uart2-m1 { + uart2m1_xfer: uart2m1-xfer { + rockchip,pins = + <2 RK_PB4 2 &pcfg_pull_up>, + <2 RK_PB6 2 &pcfg_pull_up>; + }; + }; + + uart3-m0 { + uart3m0_xfer: uart3m0-xfer { + rockchip,pins = + <0 RK_PC0 2 &pcfg_pull_up>, + <0 RK_PC1 2 &pcfg_pull_up>; + }; + + uart3m0_cts: uart3m0-cts { + rockchip,pins = + <0 RK_PC2 2 &pcfg_pull_none>; + }; + + uart3m0_rts: uart3m0-rts { + rockchip,pins = + <0 RK_PC3 2 &pcfg_pull_none>; + }; + + uart3m0_rts_gpio: uart3m0-rts-gpio { + rockchip,pins = + <0 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + uart3-m1 { + uart3m1_xfer: uart3m1-xfer { + rockchip,pins = + <1 RK_PB6 2 &pcfg_pull_up>, + <1 RK_PB7 2 &pcfg_pull_up>; + }; + + uart3m1_cts: uart3m1-cts { + rockchip,pins = + <1 RK_PB4 2 &pcfg_pull_none>; + }; + + uart3m1_rts: uart3m1-rts { + rockchip,pins = + <1 RK_PB5 2 &pcfg_pull_none>; + }; + + uart3m1_rts_gpio: uart3m1-rts-gpio { + rockchip,pins = + <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + uart4 { + uart4_xfer: uart4-xfer { + rockchip,pins = + <1 RK_PD4 2 &pcfg_pull_up>, + <1 RK_PD5 2 &pcfg_pull_up>; + }; + + uart4_cts: uart4-cts { + rockchip,pins = + <1 RK_PD6 2 &pcfg_pull_none>; + }; + + uart4_rts: uart4-rts { + rockchip,pins = + <1 RK_PD7 2 &pcfg_pull_none>; + }; + }; + + uart5 { + uart5_xfer: uart5-xfer { + rockchip,pins = + <3 RK_PA2 4 &pcfg_pull_up>, + <3 RK_PA1 4 &pcfg_pull_up>; + }; + + uart5_cts: uart5-cts { + rockchip,pins = + <3 RK_PA3 4 &pcfg_pull_none>; + }; + + uart5_rts: uart5-rts { + rockchip,pins = + <3 RK_PA5 4 &pcfg_pull_none>; + }; + }; + + spi0 { + spi0_clk: spi0-clk { + rockchip,pins = + <1 RK_PB7 3 &pcfg_pull_up_4ma>; + }; + + spi0_csn: spi0-csn { + rockchip,pins = + <1 RK_PB6 3 &pcfg_pull_up_4ma>; + }; + + spi0_miso: spi0-miso { + rockchip,pins = + <1 RK_PB5 3 &pcfg_pull_up_4ma>; + }; + + spi0_mosi: spi0-mosi { + rockchip,pins = + <1 RK_PB4 3 &pcfg_pull_up_4ma>; + }; + + spi0_clk_hs: spi0-clk-hs { + rockchip,pins = + <1 RK_PB7 3 &pcfg_pull_up_8ma>; + }; + + spi0_miso_hs: spi0-miso-hs { + rockchip,pins = + <1 RK_PB5 3 &pcfg_pull_up_8ma>; + }; + + spi0_mosi_hs: spi0-mosi-hs { + rockchip,pins = + <1 RK_PB4 3 &pcfg_pull_up_8ma>; + }; + }; + + spi1 { + spi1_clk: spi1-clk { + rockchip,pins = + <3 RK_PB7 4 &pcfg_pull_up_4ma>; + }; + + spi1_csn0: spi1-csn0 { + rockchip,pins = + <3 RK_PB1 4 &pcfg_pull_up_4ma>; + }; + + spi1_csn1: spi1-csn1 { + rockchip,pins = + <3 RK_PB2 2 &pcfg_pull_up_4ma>; + }; + + spi1_miso: spi1-miso { + rockchip,pins = + <3 RK_PB6 4 &pcfg_pull_up_4ma>; + }; + + spi1_mosi: spi1-mosi { + rockchip,pins = + <3 RK_PB4 4 &pcfg_pull_up_4ma>; + }; + + spi1_clk_hs: spi1-clk-hs { + rockchip,pins = + <3 RK_PB7 4 &pcfg_pull_up_8ma>; + }; + + spi1_miso_hs: spi1-miso-hs { + rockchip,pins = + <3 RK_PB6 4 &pcfg_pull_up_8ma>; + }; + + spi1_mosi_hs: spi1-mosi-hs { + rockchip,pins = + <3 RK_PB4 4 &pcfg_pull_up_8ma>; + }; + }; + + pdm { + pdm_clk0m0: pdm-clk0m0 { + rockchip,pins = + <3 RK_PC6 2 &pcfg_pull_none>; + }; + + pdm_clk0m1: pdm-clk0m1 { + rockchip,pins = + <2 RK_PC6 1 &pcfg_pull_none>; + }; + + pdm_clk1: pdm-clk1 { + rockchip,pins = + <3 RK_PC7 2 &pcfg_pull_none>; + }; + + pdm_sdi0m0: pdm-sdi0m0 { + rockchip,pins = + <3 RK_PD3 2 &pcfg_pull_none>; + }; + + pdm_sdi0m1: pdm-sdi0m1 { + rockchip,pins = + <2 RK_PC5 2 &pcfg_pull_none>; + }; + + pdm_sdi1: pdm-sdi1 { + rockchip,pins = + <3 RK_PD0 2 &pcfg_pull_none>; + }; + + pdm_sdi2: pdm-sdi2 { + rockchip,pins = + <3 RK_PD1 2 &pcfg_pull_none>; + }; + + pdm_sdi3: pdm-sdi3 { + rockchip,pins = + <3 RK_PD2 2 &pcfg_pull_none>; + }; + + pdm_clk0m0_sleep: pdm-clk0m0-sleep { + rockchip,pins = + <3 RK_PC6 RK_FUNC_GPIO &pcfg_input_high>; + }; + + pdm_clk0m_sleep1: pdm-clk0m1-sleep { + rockchip,pins = + <2 RK_PC6 RK_FUNC_GPIO &pcfg_input_high>; + }; + + pdm_clk1_sleep: pdm-clk1-sleep { + rockchip,pins = + <3 RK_PC7 RK_FUNC_GPIO &pcfg_input_high>; + }; + + pdm_sdi0m0_sleep: pdm-sdi0m0-sleep { + rockchip,pins = + <3 RK_PD3 RK_FUNC_GPIO &pcfg_input_high>; + }; + + pdm_sdi0m1_sleep: pdm-sdi0m1-sleep { + rockchip,pins = + <2 RK_PC5 RK_FUNC_GPIO &pcfg_input_high>; + }; + + pdm_sdi1_sleep: pdm-sdi1-sleep { + rockchip,pins = + <3 RK_PD0 RK_FUNC_GPIO &pcfg_input_high>; + }; + + pdm_sdi2_sleep: pdm-sdi2-sleep { + rockchip,pins = + <3 RK_PD1 RK_FUNC_GPIO &pcfg_input_high>; + }; + + pdm_sdi3_sleep: pdm-sdi3-sleep { + rockchip,pins = + <3 RK_PD2 RK_FUNC_GPIO &pcfg_input_high>; + }; + }; + + i2s0 { + i2s0_8ch_mclk: i2s0-8ch-mclk { + rockchip,pins = + <3 RK_PC1 2 &pcfg_pull_none>; + }; + + i2s0_8ch_sclktx: i2s0-8ch-sclktx { + rockchip,pins = + <3 RK_PC3 2 &pcfg_pull_none>; + }; + + i2s0_8ch_sclkrx: i2s0-8ch-sclkrx { + rockchip,pins = + <3 RK_PB4 2 &pcfg_pull_none>; + }; + + i2s0_8ch_lrcktx: i2s0-8ch-lrcktx { + rockchip,pins = + <3 RK_PC2 2 &pcfg_pull_none>; + }; + + i2s0_8ch_lrckrx: i2s0-8ch-lrckrx { + rockchip,pins = + <3 RK_PB5 2 &pcfg_pull_none>; + }; + + i2s0_8ch_sdo0: i2s0-8ch-sdo0 { + rockchip,pins = + <3 RK_PC4 2 &pcfg_pull_none>; + }; + + i2s0_8ch_sdo1: i2s0-8ch-sdo1 { + rockchip,pins = + <3 RK_PC0 2 &pcfg_pull_none>; + }; + + i2s0_8ch_sdo2: i2s0-8ch-sdo2 { + rockchip,pins = + <3 RK_PB7 2 &pcfg_pull_none>; + }; + + i2s0_8ch_sdo3: i2s0-8ch-sdo3 { + rockchip,pins = + <3 RK_PB6 2 &pcfg_pull_none>; + }; + + i2s0_8ch_sdi0: i2s0-8ch-sdi0 { + rockchip,pins = + <3 RK_PC5 2 &pcfg_pull_none>; + }; + + i2s0_8ch_sdi1: i2s0-8ch-sdi1 { + rockchip,pins = + <3 RK_PB3 2 &pcfg_pull_none>; + }; + + i2s0_8ch_sdi2: i2s0-8ch-sdi2 { + rockchip,pins = + <3 RK_PB1 2 &pcfg_pull_none>; + }; + + i2s0_8ch_sdi3: i2s0-8ch-sdi3 { + rockchip,pins = + <3 RK_PB0 2 &pcfg_pull_none>; + }; + }; + + i2s1 { + i2s1_2ch_mclk: i2s1-2ch-mclk { + rockchip,pins = + <2 RK_PC3 1 &pcfg_pull_none>; + }; + + i2s1_2ch_sclk: i2s1-2ch-sclk { + rockchip,pins = + <2 RK_PC2 1 &pcfg_pull_none>; + }; + + i2s1_2ch_lrck: i2s1-2ch-lrck { + rockchip,pins = + <2 RK_PC1 1 &pcfg_pull_none>; + }; + + i2s1_2ch_sdi: i2s1-2ch-sdi { + rockchip,pins = + <2 RK_PC5 1 &pcfg_pull_none>; + }; + + i2s1_2ch_sdo: i2s1-2ch-sdo { + rockchip,pins = + <2 RK_PC4 1 &pcfg_pull_none>; + }; + }; + + i2s2 { + i2s2_2ch_mclk: i2s2-2ch-mclk { + rockchip,pins = + <3 RK_PA1 2 &pcfg_pull_none>; + }; + + i2s2_2ch_sclk: i2s2-2ch-sclk { + rockchip,pins = + <3 RK_PA2 2 &pcfg_pull_none>; + }; + + i2s2_2ch_lrck: i2s2-2ch-lrck { + rockchip,pins = + <3 RK_PA3 2 &pcfg_pull_none>; + }; + + i2s2_2ch_sdi: i2s2-2ch-sdi { + rockchip,pins = + <3 RK_PA5 2 &pcfg_pull_none>; + }; + + i2s2_2ch_sdo: i2s2-2ch-sdo { + rockchip,pins = + <3 RK_PA7 2 &pcfg_pull_none>; + }; + }; + + sdmmc { + sdmmc_clk: sdmmc-clk { + rockchip,pins = + <1 RK_PD6 1 &pcfg_pull_none_8ma>; + }; + + sdmmc_cmd: sdmmc-cmd { + rockchip,pins = + <1 RK_PD7 1 &pcfg_pull_up_8ma>; + }; + + sdmmc_det: sdmmc-det { + rockchip,pins = + <0 RK_PA3 1 &pcfg_pull_up_8ma>; + }; + + sdmmc_bus1: sdmmc-bus1 { + rockchip,pins = + <1 RK_PD2 1 &pcfg_pull_up_8ma>; + }; + + sdmmc_bus4: sdmmc-bus4 { + rockchip,pins = + <1 RK_PD2 1 &pcfg_pull_up_8ma>, + <1 RK_PD3 1 &pcfg_pull_up_8ma>, + <1 RK_PD4 1 &pcfg_pull_up_8ma>, + <1 RK_PD5 1 &pcfg_pull_up_8ma>; + }; + + sdmmc_gpio: sdmmc-gpio { + rockchip,pins = + <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_up_4ma>, + <1 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up_4ma>, + <1 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up_4ma>, + <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up_4ma>, + <1 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up_4ma>, + <1 RK_PD7 RK_FUNC_GPIO &pcfg_pull_up_4ma>; + }; + }; + + sdio { + sdio_clk: sdio-clk { + rockchip,pins = + <1 RK_PC5 1 &pcfg_pull_none>; + }; + + sdio_cmd: sdio-cmd { + rockchip,pins = + <1 RK_PC4 1 &pcfg_pull_up>; + }; + + sdio_bus4: sdio-bus4 { + rockchip,pins = + <1 RK_PC6 1 &pcfg_pull_up>, + <1 RK_PC7 1 &pcfg_pull_up>, + <1 RK_PD0 1 &pcfg_pull_up>, + <1 RK_PD1 1 &pcfg_pull_up>; + }; + + sdio_gpio: sdio-gpio { + rockchip,pins = + <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>, + <1 RK_PC7 RK_FUNC_GPIO &pcfg_pull_up>, + <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>, + <1 RK_PD1 RK_FUNC_GPIO &pcfg_pull_up>, + <1 RK_PC4 RK_FUNC_GPIO &pcfg_pull_up>, + <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + emmc { + emmc_clk: emmc-clk { + rockchip,pins = + <1 RK_PB1 2 &pcfg_pull_none_8ma>; + }; + + emmc_cmd: emmc-cmd { + rockchip,pins = + <1 RK_PB2 2 &pcfg_pull_up_8ma>; + }; + + emmc_pwren: emmc-pwren { + rockchip,pins = + <1 RK_PB0 2 &pcfg_pull_none>; + }; + + emmc_rstnout: emmc-rstnout { + rockchip,pins = + <1 RK_PB3 2 &pcfg_pull_none>; + }; + + emmc_bus1: emmc-bus1 { + rockchip,pins = + <1 RK_PA0 2 &pcfg_pull_up_8ma>; + }; + + emmc_bus4: emmc-bus4 { + rockchip,pins = + <1 RK_PA0 2 &pcfg_pull_up_8ma>, + <1 RK_PA1 2 &pcfg_pull_up_8ma>, + <1 RK_PA2 2 &pcfg_pull_up_8ma>, + <1 RK_PA3 2 &pcfg_pull_up_8ma>; + }; + + emmc_bus8: emmc-bus8 { + rockchip,pins = + <1 RK_PA0 2 &pcfg_pull_up_8ma>, + <1 RK_PA1 2 &pcfg_pull_up_8ma>, + <1 RK_PA2 2 &pcfg_pull_up_8ma>, + <1 RK_PA3 2 &pcfg_pull_up_8ma>, + <1 RK_PA4 2 &pcfg_pull_up_8ma>, + <1 RK_PA5 2 &pcfg_pull_up_8ma>, + <1 RK_PA6 2 &pcfg_pull_up_8ma>, + <1 RK_PA7 2 &pcfg_pull_up_8ma>; + }; + }; + + flash { + flash_cs0: flash-cs0 { + rockchip,pins = + <1 RK_PB0 1 &pcfg_pull_none>; + }; + + flash_rdy: flash-rdy { + rockchip,pins = + <1 RK_PB1 1 &pcfg_pull_none>; + }; + + flash_dqs: flash-dqs { + rockchip,pins = + <1 RK_PB2 1 &pcfg_pull_none>; + }; + + flash_ale: flash-ale { + rockchip,pins = + <1 RK_PB3 1 &pcfg_pull_none>; + }; + + flash_cle: flash-cle { + rockchip,pins = + <1 RK_PB4 1 &pcfg_pull_none>; + }; + + flash_wrn: flash-wrn { + rockchip,pins = + <1 RK_PB5 1 &pcfg_pull_none>; + }; + + flash_csl: flash-csl { + rockchip,pins = + <1 RK_PB6 1 &pcfg_pull_none>; + }; + + flash_rdn: flash-rdn { + rockchip,pins = + <1 RK_PB7 1 &pcfg_pull_none>; + }; + + flash_bus8: flash-bus8 { + rockchip,pins = + <1 RK_PA0 1 &pcfg_pull_up_12ma>, + <1 RK_PA1 1 &pcfg_pull_up_12ma>, + <1 RK_PA2 1 &pcfg_pull_up_12ma>, + <1 RK_PA3 1 &pcfg_pull_up_12ma>, + <1 RK_PA4 1 &pcfg_pull_up_12ma>, + <1 RK_PA5 1 &pcfg_pull_up_12ma>, + <1 RK_PA6 1 &pcfg_pull_up_12ma>, + <1 RK_PA7 1 &pcfg_pull_up_12ma>; + }; + }; + + lcdc { + lcdc_rgb_dclk_pin: lcdc-rgb-dclk-pin { + rockchip,pins = + <3 RK_PA0 1 &pcfg_pull_none_12ma>; + }; + + lcdc_rgb_m0_hsync_pin: lcdc-rgb-m0-hsync-pin { + rockchip,pins = + <3 RK_PA1 1 &pcfg_pull_none_12ma>; + }; + + lcdc_rgb_m0_vsync_pin: lcdc-rgb-m0-vsync-pin { + rockchip,pins = + <3 RK_PA2 1 &pcfg_pull_none_12ma>; + }; + + lcdc_rgb_m0_den_pin: lcdc-rgb-m0-den-pin { + rockchip,pins = + <3 RK_PA3 1 &pcfg_pull_none_12ma>; + }; + + lcdc_rgb888_m0_data_pins: lcdc-rgb888-m0-data-pins { + rockchip,pins = + <3 RK_PA7 1 &pcfg_pull_none_8ma>, /* lcdc_d3 */ + <3 RK_PA6 1 &pcfg_pull_none_8ma>, /* lcdc_d2 */ + <3 RK_PA5 1 &pcfg_pull_none_8ma>, /* lcdc_d1 */ + <3 RK_PA4 1 &pcfg_pull_none_8ma>, /* lcdc_d0 */ + <3 RK_PB3 1 &pcfg_pull_none_8ma>, /* lcdc_d7 */ + <3 RK_PB2 1 &pcfg_pull_none_8ma>, /* lcdc_d6 */ + <3 RK_PB1 1 &pcfg_pull_none_8ma>, /* lcdc_d5 */ + <3 RK_PB0 1 &pcfg_pull_none_8ma>, /* lcdc_d4 */ + <3 RK_PB7 1 &pcfg_pull_none_8ma>, /* lcdc_d11 */ + <3 RK_PB6 1 &pcfg_pull_none_8ma>, /* lcdc_d10 */ + <3 RK_PB5 1 &pcfg_pull_none_8ma>, /* lcdc_d9 */ + <3 RK_PB4 1 &pcfg_pull_none_8ma>, /* lcdc_d8 */ + <3 RK_PC3 1 &pcfg_pull_none_8ma>, /* lcdc_d15 */ + <3 RK_PC2 1 &pcfg_pull_none_8ma>, /* lcdc_d14 */ + <3 RK_PC1 1 &pcfg_pull_none_8ma>, /* lcdc_d13 */ + <3 RK_PC0 1 &pcfg_pull_none_8ma>, /* lcdc_d12 */ + <3 RK_PC7 1 &pcfg_pull_none_8ma>, /* lcdc_d19 */ + <3 RK_PC6 1 &pcfg_pull_none_8ma>, /* lcdc_d18 */ + <3 RK_PC5 1 &pcfg_pull_none_8ma>, /* lcdc_d17 */ + <3 RK_PC4 1 &pcfg_pull_none_8ma>, /* lcdc_d16 */ + <3 RK_PD3 1 &pcfg_pull_none_8ma>, /* lcdc_d23 */ + <3 RK_PD2 1 &pcfg_pull_none_8ma>, /* lcdc_d22 */ + <3 RK_PD1 1 &pcfg_pull_none_8ma>, /* lcdc_d21 */ + <3 RK_PD0 1 &pcfg_pull_none_8ma>; /* lcdc_d20 */ + }; + + lcdc_rgb666_m0_data_pins: lcdc-rgb666-m0-data-pins { + rockchip,pins = + <3 RK_PA7 1 &pcfg_pull_none_8ma>, /* lcdc_d3 */ + <3 RK_PA6 1 &pcfg_pull_none_8ma>, /* lcdc_d2 */ + <3 RK_PA5 1 &pcfg_pull_none_8ma>, /* lcdc_d1 */ + <3 RK_PA4 1 &pcfg_pull_none_8ma>, /* lcdc_d0 */ + <3 RK_PB3 1 &pcfg_pull_none_8ma>, /* lcdc_d7 */ + <3 RK_PB2 1 &pcfg_pull_none_8ma>, /* lcdc_d6 */ + <3 RK_PB1 1 &pcfg_pull_none_8ma>, /* lcdc_d5 */ + <3 RK_PB0 1 &pcfg_pull_none_8ma>, /* lcdc_d4 */ + <3 RK_PB7 1 &pcfg_pull_none_8ma>, /* lcdc_d11 */ + <3 RK_PB6 1 &pcfg_pull_none_8ma>, /* lcdc_d10 */ + <3 RK_PB5 1 &pcfg_pull_none_8ma>, /* lcdc_d9 */ + <3 RK_PB4 1 &pcfg_pull_none_8ma>, /* lcdc_d8 */ + <3 RK_PC3 1 &pcfg_pull_none_8ma>, /* lcdc_d15 */ + <3 RK_PC2 1 &pcfg_pull_none_8ma>, /* lcdc_d14 */ + <3 RK_PC1 1 &pcfg_pull_none_8ma>, /* lcdc_d13 */ + <3 RK_PC0 1 &pcfg_pull_none_8ma>, /* lcdc_d12 */ + <3 RK_PC5 1 &pcfg_pull_none_8ma>, /* lcdc_d17 */ + <3 RK_PC4 1 &pcfg_pull_none_8ma>; /* lcdc_d16 */ + }; + + lcdc_rgb565_m0_data_pins: lcdc-rgb565-m0-data-pins { + rockchip,pins = + <3 RK_PA7 1 &pcfg_pull_none_8ma>, /* lcdc_d3 */ + <3 RK_PA6 1 &pcfg_pull_none_8ma>, /* lcdc_d2 */ + <3 RK_PA5 1 &pcfg_pull_none_8ma>, /* lcdc_d1 */ + <3 RK_PA4 1 &pcfg_pull_none_8ma>, /* lcdc_d0 */ + <3 RK_PB3 1 &pcfg_pull_none_8ma>, /* lcdc_d7 */ + <3 RK_PB2 1 &pcfg_pull_none_8ma>, /* lcdc_d6 */ + <3 RK_PB1 1 &pcfg_pull_none_8ma>, /* lcdc_d5 */ + <3 RK_PB0 1 &pcfg_pull_none_8ma>, /* lcdc_d4 */ + <3 RK_PB7 1 &pcfg_pull_none_8ma>, /* lcdc_d11 */ + <3 RK_PB6 1 &pcfg_pull_none_8ma>, /* lcdc_d10 */ + <3 RK_PB5 1 &pcfg_pull_none_8ma>, /* lcdc_d9 */ + <3 RK_PB4 1 &pcfg_pull_none_8ma>, /* lcdc_d8 */ + <3 RK_PC3 1 &pcfg_pull_none_8ma>, /* lcdc_d15 */ + <3 RK_PC2 1 &pcfg_pull_none_8ma>, /* lcdc_d14 */ + <3 RK_PC1 1 &pcfg_pull_none_8ma>, /* lcdc_d13 */ + <3 RK_PC0 1 &pcfg_pull_none_8ma>; /* lcdc_d12 */ + }; + + lcdc_rgb888_m1_data_pins: lcdc-rgb888-m1-data-pins { + rockchip,pins = + <3 RK_PA6 1 &pcfg_pull_none_8ma>, /* lcdc_d2 */ + <3 RK_PA4 1 &pcfg_pull_none_8ma>, /* lcdc_d0 */ + <3 RK_PB3 1 &pcfg_pull_none_8ma>, /* lcdc_d7 */ + <3 RK_PB2 1 &pcfg_pull_none_8ma>, /* lcdc_d6 */ + <3 RK_PB5 1 &pcfg_pull_none_8ma>, /* lcdc_d9 */ + <3 RK_PC3 1 &pcfg_pull_none_8ma>, /* lcdc_d15 */ + <3 RK_PC2 1 &pcfg_pull_none_8ma>, /* lcdc_d14 */ + <3 RK_PC1 1 &pcfg_pull_none_8ma>, /* lcdc_d13 */ + <3 RK_PC0 1 &pcfg_pull_none_8ma>, /* lcdc_d12 */ + <3 RK_PC7 1 &pcfg_pull_none_8ma>, /* lcdc_d19 */ + <3 RK_PC6 1 &pcfg_pull_none_8ma>, /* lcdc_d18 */ + <3 RK_PC5 1 &pcfg_pull_none_8ma>, /* lcdc_d17 */ + <3 RK_PC4 1 &pcfg_pull_none_8ma>, /* lcdc_d16 */ + <3 RK_PD3 1 &pcfg_pull_none_8ma>, /* lcdc_d23 */ + <3 RK_PD2 1 &pcfg_pull_none_8ma>, /* lcdc_d22 */ + <3 RK_PD1 1 &pcfg_pull_none_8ma>, /* lcdc_d21 */ + <3 RK_PD0 1 &pcfg_pull_none_8ma>; /* lcdc_d20 */ + }; + + lcdc_rgb666_m1_data_pins: lcdc-rgb666-m1-data-pins { + rockchip,pins = + <3 RK_PA6 1 &pcfg_pull_none_8ma>, /* lcdc_d2 */ + <3 RK_PA4 1 &pcfg_pull_none_8ma>, /* lcdc_d0 */ + <3 RK_PB3 1 &pcfg_pull_none_8ma>, /* lcdc_d7 */ + <3 RK_PB2 1 &pcfg_pull_none_8ma>, /* lcdc_d6 */ + <3 RK_PB5 1 &pcfg_pull_none_8ma>, /* lcdc_d9 */ + <3 RK_PC3 1 &pcfg_pull_none_8ma>, /* lcdc_d15 */ + <3 RK_PC2 1 &pcfg_pull_none_8ma>, /* lcdc_d14 */ + <3 RK_PC1 1 &pcfg_pull_none_8ma>, /* lcdc_d13 */ + <3 RK_PC0 1 &pcfg_pull_none_8ma>, /* lcdc_d12 */ + <3 RK_PC5 1 &pcfg_pull_none_8ma>, /* lcdc_d17 */ + <3 RK_PC4 1 &pcfg_pull_none_8ma>; /* lcdc_d16 */ + }; + + lcdc_rgb565_m1_data_pins: lcdc-rgb565-m1-data-pins { + rockchip,pins = + <3 RK_PA6 1 &pcfg_pull_none_8ma>, /* lcdc_d2 */ + <3 RK_PA4 1 &pcfg_pull_none_8ma>, /* lcdc_d0 */ + <3 RK_PB3 1 &pcfg_pull_none_8ma>, /* lcdc_d7 */ + <3 RK_PB2 1 &pcfg_pull_none_8ma>, /* lcdc_d6 */ + <3 RK_PB5 1 &pcfg_pull_none_8ma>, /* lcdc_d9 */ + <3 RK_PC3 1 &pcfg_pull_none_8ma>, /* lcdc_d15 */ + <3 RK_PC2 1 &pcfg_pull_none_8ma>, /* lcdc_d14 */ + <3 RK_PC1 1 &pcfg_pull_none_8ma>, /* lcdc_d13 */ + <3 RK_PC0 1 &pcfg_pull_none_8ma>; /* lcdc_d12 */ + }; + }; + + pwm0 { + pwm0_pin: pwm0-pin { + rockchip,pins = + <0 RK_PB7 1 &pcfg_pull_none>; + }; + }; + + pwm1 { + pwm1_pin: pwm1-pin { + rockchip,pins = + <0 RK_PC0 1 &pcfg_pull_none>; + }; + }; + + pwm2 { + pwm2_pin: pwm2-pin { + rockchip,pins = + <2 RK_PB5 1 &pcfg_pull_none>; + }; + }; + + pwm3 { + pwm3_pin: pwm3-pin { + rockchip,pins = + <0 RK_PC1 1 &pcfg_pull_none>; + }; + }; + + pwm4 { + pwm4_pin: pwm4-pin { + rockchip,pins = + <3 RK_PC2 3 &pcfg_pull_none>; + }; + }; + + pwm5 { + pwm5_pin: pwm5-pin { + rockchip,pins = + <3 RK_PC3 3 &pcfg_pull_none>; + }; + }; + + pwm6 { + pwm6_pin: pwm6-pin { + rockchip,pins = + <3 RK_PC4 3 &pcfg_pull_none>; + }; + }; + + pwm7 { + pwm7_pin: pwm7-pin { + rockchip,pins = + <3 RK_PC5 3 &pcfg_pull_none>; + }; + }; + + gmac { + rmii_pins: rmii-pins { + rockchip,pins = + <2 RK_PA0 2 &pcfg_pull_none_12ma>, /* mac_txen */ + <2 RK_PA1 2 &pcfg_pull_none_12ma>, /* mac_txd1 */ + <2 RK_PA2 2 &pcfg_pull_none_12ma>, /* mac_txd0 */ + <2 RK_PA3 2 &pcfg_pull_none>, /* mac_rxd0 */ + <2 RK_PA4 2 &pcfg_pull_none>, /* mac_rxd1 */ + <2 RK_PA5 2 &pcfg_pull_none>, /* mac_rxer */ + <2 RK_PA6 2 &pcfg_pull_none>, /* mac_rxdv */ + <2 RK_PA7 2 &pcfg_pull_none>, /* mac_mdio */ + <2 RK_PB1 2 &pcfg_pull_none>; /* mac_mdc */ + }; + + mac_refclk_12ma: mac-refclk-12ma { + rockchip,pins = + <2 RK_PB2 2 &pcfg_pull_none_12ma>; + }; + + mac_refclk: mac-refclk { + rockchip,pins = + <2 RK_PB2 2 &pcfg_pull_none>; + }; + }; + + cif-m0 { + cif_clkout_m0: cif-clkout-m0 { + rockchip,pins = + <2 RK_PB3 1 &pcfg_pull_none>; + }; + + dvp_d2d9_m0: dvp-d2d9-m0 { + rockchip,pins = + <2 RK_PA0 1 &pcfg_pull_none>, /* cif_data2 */ + <2 RK_PA1 1 &pcfg_pull_none>, /* cif_data3 */ + <2 RK_PA2 1 &pcfg_pull_none>, /* cif_data4 */ + <2 RK_PA3 1 &pcfg_pull_none>, /* cif_data5 */ + <2 RK_PA4 1 &pcfg_pull_none>, /* cif_data6 */ + <2 RK_PA5 1 &pcfg_pull_none>, /* cif_data7 */ + <2 RK_PA6 1 &pcfg_pull_none>, /* cif_data8 */ + <2 RK_PA7 1 &pcfg_pull_none>, /* cif_data9 */ + <2 RK_PB0 1 &pcfg_pull_none>, /* cif_sync */ + <2 RK_PB1 1 &pcfg_pull_none>, /* cif_href */ + <2 RK_PB2 1 &pcfg_pull_none>, /* cif_clkin */ + <2 RK_PB3 1 &pcfg_pull_none>; /* cif_clkout */ + }; + + dvp_d0d1_m0: dvp-d0d1-m0 { + rockchip,pins = + <2 RK_PB4 1 &pcfg_pull_none>, /* cif_data0 */ + <2 RK_PB6 1 &pcfg_pull_none>; /* cif_data1 */ + }; + + dvp_d10d11_m0:d10-d11-m0 { + rockchip,pins = + <2 RK_PB7 1 &pcfg_pull_none>, /* cif_data10 */ + <2 RK_PC0 1 &pcfg_pull_none>; /* cif_data11 */ + }; + }; + + cif-m1 { + cif_clkout_m1: cif-clkout-m1 { + rockchip,pins = + <3 RK_PD0 3 &pcfg_pull_none>; + }; + + dvp_d2d9_m1: dvp-d2d9-m1 { + rockchip,pins = + <3 RK_PA3 3 &pcfg_pull_none>, /* cif_data2 */ + <3 RK_PA5 3 &pcfg_pull_none>, /* cif_data3 */ + <3 RK_PA7 3 &pcfg_pull_none>, /* cif_data4 */ + <3 RK_PB0 3 &pcfg_pull_none>, /* cif_data5 */ + <3 RK_PB1 3 &pcfg_pull_none>, /* cif_data6 */ + <3 RK_PB4 3 &pcfg_pull_none>, /* cif_data7 */ + <3 RK_PB6 3 &pcfg_pull_none>, /* cif_data8 */ + <3 RK_PB7 3 &pcfg_pull_none>, /* cif_data9 */ + <3 RK_PD1 3 &pcfg_pull_none>, /* cif_sync */ + <3 RK_PD2 3 &pcfg_pull_none>, /* cif_href */ + <3 RK_PD3 3 &pcfg_pull_none>, /* cif_clkin */ + <3 RK_PD0 3 &pcfg_pull_none>; /* cif_clkout */ + }; + + dvp_d0d1_m1: dvp-d0d1-m1 { + rockchip,pins = + <3 RK_PA1 3 &pcfg_pull_none>, /* cif_data0 */ + <3 RK_PA2 3 &pcfg_pull_none>; /* cif_data1 */ + }; + + dvp_d10d11_m1:d10-d11-m1 { + rockchip,pins = + <3 RK_PC6 3 &pcfg_pull_none>, /* cif_data10 */ + <3 RK_PC7 3 &pcfg_pull_none>; /* cif_data11 */ + }; + }; + + isp { + isp_prelight: isp-prelight { + rockchip,pins = + <3 RK_PD1 4 &pcfg_pull_none>; + }; + }; + }; +}; diff --git a/dts/src/arm64/rockchip/rk3328-roc-cc.dts b/dts/src/arm64/rockchip/rk3328-roc-cc.dts index 246c317f6a..99d0d99129 100644 --- a/dts/src/arm64/rockchip/rk3328-roc-cc.dts +++ b/dts/src/arm64/rockchip/rk3328-roc-cc.dts @@ -41,6 +41,19 @@ vin-supply = <&vcc_io>; }; + vcc_sdio: sdmmcio-regulator { + compatible = "regulator-gpio"; + gpios = <&grf_gpio 0 GPIO_ACTIVE_HIGH>; + states = <1800000 0x1 + 3300000 0x0>; + regulator-name = "vcc_sdio"; + regulator-type = "voltage"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + vin-supply = <&vcc_sys>; + }; + vcc_host1_5v: vcc_otg_5v: vcc-host1-5v-regulator { compatible = "regulator-fixed"; enable-active-high; @@ -208,6 +221,18 @@ }; }; +&io_domains { + status = "okay"; + + vccio1-supply = <&vcc_io>; + vccio2-supply = <&vcc18_emmc>; + vccio3-supply = <&vcc_sdio>; + vccio4-supply = <&vcc_18>; + vccio5-supply = <&vcc_io>; + vccio6-supply = <&vcc_io>; + pmuio-supply = <&vcc_io>; +}; + &pinctrl { pmic { pmic_int_l: pmic-int-l { @@ -230,7 +255,12 @@ max-frequency = <150000000>; pinctrl-names = "default"; pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_dectn &sdmmc0_bus4>; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-sdr104; vmmc-supply = <&vcc_sd>; + vqmmc-supply = <&vcc_sdio>; status = "okay"; }; diff --git a/dts/src/arm64/rockchip/rk3328-rock64.dts b/dts/src/arm64/rockchip/rk3328-rock64.dts index 5272e887a4..dc20145dd3 100644 --- a/dts/src/arm64/rockchip/rk3328-rock64.dts +++ b/dts/src/arm64/rockchip/rk3328-rock64.dts @@ -46,7 +46,7 @@ vcc_host1_5v: vcc_otg_5v: vcc-host1-5v-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>; + gpio = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&usb20_host_drv>; regulator-name = "vcc_host1_5v"; @@ -62,6 +62,23 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; }; + + sound { + compatible = "audio-graph-card"; + label = "rockchip,rk3328"; + dais = <&spdif_p0>; + }; + + spdif-dit { + compatible = "linux,spdif-dit"; + #sound-dai-cells = <0>; + + port { + dit_p0_0: endpoint { + remote-endpoint = <&spdif_p0_0>; + }; + }; + }; }; &cpu0 { @@ -108,6 +125,14 @@ status = "okay"; }; +&hdmi { + status = "okay"; +}; + +&hdmiphy { + status = "okay"; +}; + &i2c1 { status = "okay"; @@ -238,7 +263,7 @@ usb2 { usb20_host_drv: usb20-host-drv { - rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; }; }; @@ -261,6 +286,30 @@ status = "okay"; }; +&spdif { + pinctrl-0 = <&spdifm0_tx>; + status = "okay"; + #sound-dai-cells = <0>; + + spdif_p0: port { + spdif_p0_0: endpoint { + remote-endpoint = <&dit_p0_0>; + }; + }; +}; + +&spi0 { + status = "okay"; + + spiflash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + + /* maximum speed for Rockchip SPI */ + spi-max-frequency = <50000000>; + }; +}; + &tsadc { rockchip,hw-tshut-mode = <0>; rockchip,hw-tshut-polarity = <0>; @@ -295,3 +344,11 @@ &usb_host0_ohci { status = "okay"; }; + +&vop { + status = "okay"; +}; + +&vop_mmu { + status = "okay"; +}; diff --git a/dts/src/arm64/rockchip/rk3328.dtsi b/dts/src/arm64/rockchip/rk3328.dtsi index 3f5a294430..e1a33dd981 100644 --- a/dts/src/arm64/rockchip/rk3328.dtsi +++ b/dts/src/arm64/rockchip/rk3328.dtsi @@ -151,6 +151,11 @@ interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; }; + display_subsystem: display-subsystem { + compatible = "rockchip,display-subsystem"; + ports = <&vop_out>; + }; + psci { compatible = "arm,psci-1.0", "arm,psci-0.2"; method = "smc"; @@ -249,6 +254,12 @@ status = "disabled"; }; + grf_gpio: grf-gpio { + compatible = "rockchip,rk3328-grf-gpio"; + gpio-controller; + #gpio-cells = <2>; + }; + power: power-controller { compatible = "rockchip,rk3328-power-controller"; #power-domain-cells = <1>; @@ -274,7 +285,6 @@ mode-bootloader = <BOOT_FASTBOOT>; mode-loader = <BOOT_BL_DOWNLOAD>; }; - }; uart0: serial@ff110000 { @@ -600,6 +610,28 @@ status = "disabled"; }; + vop: vop@ff370000 { + compatible = "rockchip,rk3328-vop"; + reg = <0x0 0xff370000 0x0 0x3efc>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru ACLK_VOP>, <&cru DCLK_LCDC>, <&cru HCLK_VOP>; + clock-names = "aclk_vop", "dclk_vop", "hclk_vop"; + resets = <&cru SRST_VOP_A>, <&cru SRST_VOP_H>, <&cru SRST_VOP_D>; + reset-names = "axi", "ahb", "dclk"; + iommus = <&vop_mmu>; + status = "disabled"; + + vop_out: port { + #address-cells = <1>; + #size-cells = <0>; + + vop_out_hdmi: endpoint@0 { + reg = <0>; + remote-endpoint = <&hdmi_in_vop>; + }; + }; + }; + vop_mmu: iommu@ff373f00 { compatible = "rockchip,iommu"; reg = <0x0 0xff373f00 0x0 0x100>; @@ -611,6 +643,46 @@ status = "disabled"; }; + hdmi: hdmi@ff3c0000 { + compatible = "rockchip,rk3328-dw-hdmi"; + reg = <0x0 0xff3c0000 0x0 0x20000>; + reg-io-width = <4>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_HDMI>, + <&cru SCLK_HDMI_SFC>; + clock-names = "iahb", + "isfr"; + phys = <&hdmiphy>; + phy-names = "hdmi"; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_cec &hdmii2c_xfer &hdmi_hpd>; + rockchip,grf = <&grf>; + status = "disabled"; + + ports { + hdmi_in: port { + hdmi_in_vop: endpoint { + remote-endpoint = <&vop_out_hdmi>; + }; + }; + }; + }; + + hdmiphy: phy@ff430000 { + compatible = "rockchip,rk3328-hdmi-phy"; + reg = <0x0 0xff430000 0x0 0x10000>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_HDMIPHY>, <&xin24m>, <&cru DCLK_HDMIPHY>; + clock-names = "sysclk", "refoclk", "refpclk"; + clock-output-names = "hdmi_phy"; + #clock-cells = <0>; + nvmem-cells = <&efuse_cpu_version>; + nvmem-cell-names = "cpu-version"; + #phy-cells = <0>; + status = "disabled"; + }; + cru: clock-controller@ff440000 { compatible = "rockchip,rk3328-cru", "rockchip,cru", "syscon"; reg = <0x0 0xff440000 0x0 0x1000>; diff --git a/dts/src/arm64/rockchip/rk3399-ficus.dts b/dts/src/arm64/rockchip/rk3399-ficus.dts index 8978d924eb..cce266da28 100644 --- a/dts/src/arm64/rockchip/rk3399-ficus.dts +++ b/dts/src/arm64/rockchip/rk3399-ficus.dts @@ -7,8 +7,7 @@ */ /dts-v1/; -#include "rk3399.dtsi" -#include "rk3399-opp.dtsi" +#include "rk3399-rock960.dtsi" / { model = "96boards RK3399 Ficus"; @@ -24,97 +23,6 @@ clock-output-names = "clkin_gmac"; #clock-cells = <0>; }; - - vcc1v8_s0: vcc1v8-s0 { - compatible = "regulator-fixed"; - regulator-name = "vcc1v8_s0"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - vcc_sys: vcc-sys { - compatible = "regulator-fixed"; - regulator-name = "vcc_sys"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; - - vcc3v3_sys: vcc3v3-sys { - compatible = "regulator-fixed"; - regulator-name = "vcc3v3_sys"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - vin-supply = <&vcc_sys>; - }; - - vcc3v3_pcie: vcc3v3-pcie-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio1 24 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&pcie_drv>; - regulator-boot-on; - regulator-name = "vcc3v3_pcie"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vcc3v3_sys>; - }; - - vcc5v0_host: vcc5v0-host-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&host_vbus_drv>; - regulator-name = "vcc5v0_host"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - vin-supply = <&vcc_sys>; - }; - - vdd_log: vdd-log { - compatible = "pwm-regulator"; - pwms = <&pwm2 0 25000 0>; - regulator-name = "vdd_log"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1400000>; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vcc_sys>; - }; - -}; - -&cpu_l0 { - cpu-supply = <&vdd_cpu_l>; -}; - -&cpu_l1 { - cpu-supply = <&vdd_cpu_l>; -}; - -&cpu_l2 { - cpu-supply = <&vdd_cpu_l>; -}; - -&cpu_l3 { - cpu-supply = <&vdd_cpu_l>; -}; - -&cpu_b0 { - cpu-supply = <&vdd_cpu_b>; -}; - -&cpu_b1 { - cpu-supply = <&vdd_cpu_b>; -}; - -&emmc_phy { - status = "okay"; }; &gmac { @@ -133,279 +41,8 @@ status = "okay"; }; -&hdmi { - ddc-i2c-bus = <&i2c3>; - pinctrl-names = "default"; - pinctrl-0 = <&hdmi_cec>; - status = "okay"; -}; - -&i2c0 { - clock-frequency = <400000>; - i2c-scl-rising-time-ns = <168>; - i2c-scl-falling-time-ns = <4>; - status = "okay"; - - vdd_cpu_b: regulator@40 { - compatible = "silergy,syr827"; - reg = <0x40>; - fcs,suspend-voltage-selector = <1>; - regulator-name = "vdd_cpu_b"; - regulator-min-microvolt = <712500>; - regulator-max-microvolt = <1500000>; - regulator-ramp-delay = <1000>; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vcc_sys>; - status = "okay"; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_gpu: regulator@41 { - compatible = "silergy,syr828"; - reg = <0x41>; - fcs,suspend-voltage-selector = <1>; - regulator-name = "vdd_gpu"; - regulator-min-microvolt = <712500>; - regulator-max-microvolt = <1500000>; - regulator-ramp-delay = <1000>; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vcc_sys>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - rk808: pmic@1b { - compatible = "rockchip,rk808"; - reg = <0x1b>; - interrupt-parent = <&gpio1>; - interrupts = <21 IRQ_TYPE_LEVEL_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&pmic_int_l>; - rockchip,system-power-controller; - wakeup-source; - #clock-cells = <1>; - clock-output-names = "xin32k", "rk808-clkout2"; - - vcc1-supply = <&vcc_sys>; - vcc2-supply = <&vcc_sys>; - vcc3-supply = <&vcc_sys>; - vcc4-supply = <&vcc_sys>; - vcc6-supply = <&vcc_sys>; - vcc7-supply = <&vcc_sys>; - vcc8-supply = <&vcc3v3_sys>; - vcc9-supply = <&vcc_sys>; - vcc10-supply = <&vcc_sys>; - vcc11-supply = <&vcc_sys>; - vcc12-supply = <&vcc3v3_sys>; - vddio-supply = <&vcc_1v8>; - - regulators { - vdd_center: DCDC_REG1 { - regulator-name = "vdd_center"; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_cpu_l: DCDC_REG2 { - regulator-name = "vdd_cpu_l"; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_ddr: DCDC_REG3 { - regulator-name = "vcc_ddr"; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - vcc_1v8: DCDC_REG4 { - regulator-name = "vcc_1v8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vcc1v8_dvp: LDO_REG1 { - regulator-name = "vcc1v8_dvp"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vcca1v8_hdmi: LDO_REG2 { - regulator-name = "vcca1v8_hdmi"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vcca_1v8: LDO_REG3 { - regulator-name = "vcca_1v8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vcc_sd: LDO_REG4 { - regulator-name = "vcc_sd"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vcc3v0_sd: LDO_REG5 { - regulator-name = "vcc3v0_sd"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3000000>; - }; - }; - - vcc_1v5: LDO_REG6 { - regulator-name = "vcc_1v5"; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1500000>; - }; - }; - - vcca0v9_hdmi: LDO_REG7 { - regulator-name = "vcca0v9_hdmi"; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <900000>; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <900000>; - }; - }; - - vcc_3v0: LDO_REG8 { - regulator-name = "vcc_3v0"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3000000>; - }; - }; - - vcc3v3_s3: SWITCH_REG1 { - regulator-name = "vcc3v3_s3"; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - vcc3v3_s0: SWITCH_REG2 { - regulator-name = "vcc3v3_s0"; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - }; - }; -}; - -&i2c1 { - status = "okay"; -}; - -&i2c2 { - status = "okay"; -}; - -&i2c3 { - status = "okay"; -}; - -&i2c4 { - status = "okay"; -}; - -&io_domains { - bt656-supply = <&vcc1v8_s0>; /* bt656_gpio2ab_ms */ - audio-supply = <&vcc1v8_s0>; /* audio_gpio3d4a_ms */ - sdmmc-supply = <&vcc_sd>; /* sdmmc_gpio4b_ms */ - gpio1830-supply = <&vcc_3v0>; /* gpio1833_gpio4cd_ms */ - status = "okay"; -}; - -&pcie_phy { - status = "okay"; -}; - &pcie0 { ep-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_HIGH>; - num-lanes = <4>; - pinctrl-names = "default"; - pinctrl-0 = <&pcie_clkreqn_cpm>; - vpcie3v3-supply = <&vcc3v3_pcie>; - status = "okay"; -}; - -&pmu_io_domains { - pmu1830-supply = <&vcc_1v8>; - status = "okay"; }; &pinctrl { @@ -416,31 +53,6 @@ }; }; - sdmmc { - sdmmc_bus1: sdmmc-bus1 { - rockchip,pins = - <4 8 RK_FUNC_1 &pcfg_pull_up_8ma>; - }; - - sdmmc_bus4: sdmmc-bus4 { - rockchip,pins = - <4 8 RK_FUNC_1 &pcfg_pull_up_8ma>, - <4 9 RK_FUNC_1 &pcfg_pull_up_8ma>, - <4 10 RK_FUNC_1 &pcfg_pull_up_8ma>, - <4 11 RK_FUNC_1 &pcfg_pull_up_8ma>; - }; - - sdmmc_clk: sdmmc-clk { - rockchip,pins = - <4 12 RK_FUNC_1 &pcfg_pull_none_18ma>; - }; - - sdmmc_cmd: sdmmc-cmd { - rockchip,pins = - <4 13 RK_FUNC_1 &pcfg_pull_up_8ma>; - }; - }; - pcie { pcie_drv: pcie-drv { rockchip,pins = @@ -448,23 +60,6 @@ }; }; - pmic { - pmic_int_l: pmic-int-l { - rockchip,pins = - <1 21 RK_FUNC_GPIO &pcfg_pull_up>; - }; - - vsel1_gpio: vsel1-gpio { - rockchip,pins = - <1 17 RK_FUNC_GPIO &pcfg_pull_down>; - }; - - vsel2_gpio: vsel2-gpio { - rockchip,pins = - <1 14 RK_FUNC_GPIO &pcfg_pull_down>; - }; - }; - usb2 { host_vbus_drv: host-vbus-drv { rockchip,pins = @@ -473,127 +68,18 @@ }; }; -&pwm2 { - status = "okay"; -}; - -&pwm3 { - status = "okay"; -}; - -&sdhci { - bus-width = <8>; - mmc-hs400-1_8v; - mmc-hs400-enhanced-strobe; - non-removable; - status = "okay"; -}; - -&sdmmc { - bus-width = <4>; - cap-mmc-highspeed; - cap-sd-highspeed; - clock-frequency = <100000000>; - clock-freq-min-max = <100000 100000000>; - disable-wp; - sd-uhs-sdr104; - vqmmc-supply = <&vcc_sd>; - card-detect-delay = <800>; - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; - status = "okay"; -}; - -&tcphy0 { - status = "okay"; -}; - -&tcphy1 { - status = "okay"; -}; - -&u2phy0 { - status = "okay"; -}; - -&u2phy1 { - status = "okay"; -}; - -&u2phy0_host { - phy-supply = <&vcc5v0_host>; - status = "okay"; -}; - -&u2phy1_host { - phy-supply = <&vcc5v0_host>; - status = "okay"; -}; - -&u2phy0_otg { - status = "okay"; -}; - -&u2phy1_otg { - status = "okay"; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_xfer &uart0_cts>; - status = "okay"; -}; - -&uart2 { - status = "okay"; -}; - -&usb_host0_ehci { - status = "okay"; -}; - -&usb_host0_ohci { - status = "okay"; -}; - -&usb_host1_ehci { - status = "okay"; -}; - -&usb_host1_ohci { - status = "okay"; -}; - -&usbdrd3_0 { - status = "okay"; -}; - &usbdrd_dwc3_0 { - status = "okay"; dr_mode = "host"; }; -&usbdrd3_1 { - status = "okay"; -}; - &usbdrd_dwc3_1 { - status = "okay"; dr_mode = "host"; }; -&vopb { - status = "okay"; -}; - -&vopb_mmu { - status = "okay"; -}; - -&vopl { - status = "okay"; +&vcc3v3_pcie { + gpio = <&gpio1 24 GPIO_ACTIVE_HIGH>; }; -&vopl_mmu { - status = "okay"; +&vcc5v0_host { + gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>; }; diff --git a/dts/src/arm64/rockchip/rk3399-firefly.dts b/dts/src/arm64/rockchip/rk3399-firefly.dts index 38336ab57c..c706db0ee9 100644 --- a/dts/src/arm64/rockchip/rk3399-firefly.dts +++ b/dts/src/arm64/rockchip/rk3399-firefly.dts @@ -622,6 +622,12 @@ }; }; + wifi { + wifi_host_wake_l: wifi-host-wake-l { + rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + leds { work_led_gpio: work_led-gpio { rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; @@ -646,6 +652,36 @@ status = "okay"; }; +&sdio0 { + /* WiFi & BT combo module Ampak AP6356S */ + bus-width = <4>; + cap-sdio-irq; + cap-sd-highspeed; + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; + non-removable; + num-slots = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>; + sd-uhs-sdr104; + + /* Power supply */ + vqmmc-supply = &vcc1v8_s3; /* IO line */ + vmmc-supply = &vcc_sdio; /* card's power */ + + status = "okay"; + + brcmf: wifi@1 { + compatible = "brcm,bcm4329-fmac"; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>; + interrupt-names = "host-wake"; + brcm,drive-strength = <5>; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_host_wake_l>; + }; +}; + &sdmmc { bus-width = <4>; cap-mmc-highspeed; diff --git a/dts/src/arm64/rockchip/rk3399-puma-haikou.dts b/dts/src/arm64/rockchip/rk3399-puma-haikou.dts index e0d64f8623..2dceeea29b 100644 --- a/dts/src/arm64/rockchip/rk3399-puma-haikou.dts +++ b/dts/src/arm64/rockchip/rk3399-puma-haikou.dts @@ -131,7 +131,7 @@ status = "okay"; clock-frequency = <400000>; - sgtl5000: codec@0a { + sgtl5000: codec@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; clocks = <&sgtl5000_clk>; diff --git a/dts/src/arm64/rockchip/rk3399-roc-pc.dts b/dts/src/arm64/rockchip/rk3399-roc-pc.dts new file mode 100644 index 0000000000..19f7732d72 --- /dev/null +++ b/dts/src/arm64/rockchip/rk3399-roc-pc.dts @@ -0,0 +1,680 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2017 T-Chip Intelligent Technology Co., Ltd + */ + +/dts-v1/; +#include <dt-bindings/pwm/pwm.h> +#include "rk3399.dtsi" +#include "rk3399-opp.dtsi" + +/ { + model = "Firefly ROC-RK3399-PC Board"; + compatible = "firefly,roc-rk3399-pc", "rockchip,rk3399"; + + chosen { + stdout-path = "serial2:1500000n8"; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm0 0 25000 0>; + }; + + clkin_gmac: external-gmac-clock { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "clkin_gmac"; + #clock-cells = <0>; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&rk808 1>; + clock-names = "ext_clock"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_enable_h>; + + /* + * On the module itself this is one of these (depending + * on the actual card populated): + * - SDIO_RESET_L_WL_REG_ON + * - PDN (power down when low) + */ + reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; + }; + + vcc_vbus_typec0: vcc-vbus-typec0 { + compatible = "regulator-fixed"; + regulator-name = "vcc_vbus_typec0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + /* + * should be placed inside mp8859, but not until mp8859 has + * its own dt-binding. + */ + vcc12v_sys: mp8859-dcdc1 { + compatible = "regulator-fixed"; + regulator-name = "vcc12v_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + vin-supply = <&vcc_vbus_typec0>; + }; + + /* switched by pmic_sleep */ + vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 { + compatible = "regulator-fixed"; + regulator-name = "vcc1v8_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_1v8>; + }; + + vcc3v3_sys: vcc3v3-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc12v_sys>; + }; + + /* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */ + vcc5v0_host: vcc5v0-host-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_host_en &hub_rst>; + regulator-name = "vcc5v0_host"; + regulator-always-on; + vin-supply = <&vcc_sys>; + }; + + vcc_vbus_typec1: vcc-vbus-typec1 { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc_vbus_typec1_en>; + regulator-name = "vcc_vbus_typec1"; + regulator-always-on; + vin-supply = <&vcc_sys>; + }; + + vcc_sys: vcc-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc12v_sys>; + }; + + vdd_log: vdd-log { + compatible = "pwm-regulator"; + pwms = <&pwm2 0 25000 1>; + regulator-name = "vdd_log"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + vin-supply = <&vcc3v3_sys>; + }; +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_b0 { + cpu-supply = <&vdd_cpu_b>; +}; + +&cpu_b1 { + cpu-supply = <&vdd_cpu_b>; +}; + +&emmc_phy { + status = "okay"; +}; + +&gmac { + assigned-clocks = <&cru SCLK_RMII_SRC>; + assigned-clock-parents = <&clkin_gmac>; + clock_in_out = "input"; + phy-supply = <&vcc_lan>; + phy-mode = "rgmii"; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>; + snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 50000>; + tx_delay = <0x28>; + rx_delay = <0x11>; + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c3>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_cec>; + status = "okay"; +}; + +&i2c0 { + clock-frequency = <400000>; + i2c-scl-rising-time-ns = <168>; + i2c-scl-falling-time-ns = <4>; + status = "okay"; + + rk808: pmic@1b { + compatible = "rockchip,rk808"; + reg = <0x1b>; + interrupt-parent = <&gpio1>; + interrupts = <21 IRQ_TYPE_LEVEL_LOW>; + #clock-cells = <1>; + clock-output-names = "xin32k", "rk808-clkout2"; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l>; + rockchip,system-power-controller; + wakeup-source; + + vcc1-supply = <&vcc3v3_sys>; + vcc2-supply = <&vcc3v3_sys>; + vcc3-supply = <&vcc3v3_sys>; + vcc4-supply = <&vcc3v3_sys>; + vcc6-supply = <&vcc3v3_sys>; + vcc7-supply = <&vcc3v3_sys>; + vcc8-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc3v3_sys>; + vcc10-supply = <&vcc3v3_sys>; + vcc11-supply = <&vcc3v3_sys>; + vcc12-supply = <&vcc3v3_sys>; + vddio-supply = <&vcc1v8_pmu>; + + regulators { + vdd_center: DCDC_REG1 { + regulator-name = "vdd_center"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_l: DCDC_REG2 { + regulator-name = "vdd_cpu_l"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_1v8: DCDC_REG4 { + regulator-name = "vcc_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcca1v8_codec: LDO_REG1 { + regulator-name = "vcca1v8_codec"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc1v8_hdmi: LDO_REG2 { + regulator-name = "vcc1v8_hdmi"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc1v8_pmu: LDO_REG3 { + regulator-name = "vcc1v8_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc_sdio: LDO_REG4 { + regulator-name = "vcc_sdio"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vcca3v0_codec: LDO_REG5 { + regulator-name = "vcca3v0_codec"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v5: LDO_REG6 { + regulator-name = "vcc_1v5"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1500000>; + }; + }; + + vcca0v9_hdmi: LDO_REG7 { + regulator-name = "vcca0v9_hdmi"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v0: LDO_REG8 { + regulator-name = "vcc_3v0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vcc3v3_s3: vcc_lan: SWITCH_REG1 { + regulator-name = "vcc3v3_s3"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_s0: SWITCH_REG2 { + regulator-name = "vcc3v3_s0"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; + + vdd_cpu_b: regulator@40 { + compatible = "silergy,syr827"; + reg = <0x40>; + fcs,suspend-voltage-selector = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&vsel1_gpio>; + regulator-name = "vdd_cpu_b"; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1500000>; + regulator-ramp-delay = <1000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc3v3_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu: regulator@41 { + compatible = "silergy,syr828"; + reg = <0x41>; + fcs,suspend-voltage-selector = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&vsel2_gpio>; + regulator-name = "vdd_gpu"; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1500000>; + regulator-ramp-delay = <1000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc3v3_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&i2c1 { + i2c-scl-rising-time-ns = <300>; + i2c-scl-falling-time-ns = <15>; + status = "okay"; +}; + +&i2c3 { + i2c-scl-rising-time-ns = <450>; + i2c-scl-falling-time-ns = <15>; + status = "okay"; +}; + +&i2c4 { + i2c-scl-rising-time-ns = <600>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; + + fusb1: usb-typec@22 { + compatible = "fcs,fusb302"; + reg = <0x22>; + interrupt-parent = <&gpio1>; + interrupts = <1 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&fusb1_int>; + vbus-supply = <&vcc_vbus_typec1>; + status = "okay"; + }; +}; + +&i2c7 { + i2c-scl-rising-time-ns = <600>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; + + fusb0: usb-typec@22 { + compatible = "fcs,fusb302"; + reg = <0x22>; + interrupt-parent = <&gpio1>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&fusb0_int>; + vbus-supply = <&vcc_vbus_typec0>; + status = "okay"; + }; +}; + +&i2s0 { + rockchip,playback-channels = <8>; + rockchip,capture-channels = <8>; + status = "okay"; +}; + +&i2s1 { + rockchip,playback-channels = <2>; + rockchip,capture-channels = <2>; + status = "okay"; +}; + +&i2s2 { + status = "okay"; +}; + +&io_domains { + audio-supply = <&vcca1v8_codec>; + bt656-supply = <&vcc_3v0>; + gpio1830-supply = <&vcc_3v0>; + sdmmc-supply = <&vcc_sdio>; + status = "okay"; +}; + +&pmu_io_domains { + pmu1830-supply = <&vcc_3v0>; + status = "okay"; +}; + +&pinctrl { + lcd-panel { + lcd_panel_reset: lcd-panel-reset { + rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + pmic { + vsel1_gpio: vsel1-gpio { + rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + vsel2_gpio: vsel2-gpio { + rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + + sdio-pwrseq { + wifi_enable_h: wifi-enable-h { + rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + usb2 { + vcc5v0_host_en: vcc5v0-host-en { + rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + hub_rst: hub-rst { + rockchip,pins = <2 RK_PA4 RK_FUNC_GPIO &pcfg_output_high>; + }; + }; + + usb-typec { + vcc_vbus_typec1_en: vcc-vbus-typec1-en { + rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + fusb30x { + fusb0_int: fusb0-int { + rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + fusb1_int: fusb1-int { + rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; +}; + +&pwm0 { + status = "okay"; +}; + +&pwm2 { + status = "okay"; +}; + +&saradc { + vref-supply = <&vcca1v8_s3>; + status = "okay"; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>; + disable-wp; + max-frequency = <150000000>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>; + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + non-removable; + status = "okay"; +}; + +&tcphy0 { + status = "okay"; +}; + +&tcphy1 { + status = "okay"; +}; + +&tsadc { + /* tshut mode 0:CRU 1:GPIO */ + rockchip,hw-tshut-mode = <1>; + /* tshut polarity 0:LOW 1:HIGH */ + rockchip,hw-tshut-polarity = <1>; + status = "okay"; +}; + +&u2phy0 { + status = "okay"; + + u2phy0_otg: otg-port { + phy-supply = <&vcc_vbus_typec0>; + status = "okay"; + }; + + u2phy0_host: host-port { + phy-supply = <&vcc5v0_host>; + status = "okay"; + }; +}; + +&u2phy1 { + status = "okay"; + + u2phy1_otg: otg-port { + phy-supply = <&vcc_vbus_typec1>; + status = "okay"; + }; + + u2phy1_host: host-port { + phy-supply = <&vcc5v0_host>; + status = "okay"; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer &uart0_cts>; + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +&usbdrd3_0 { + status = "okay"; +}; + +&usbdrd_dwc3_0 { + status = "okay"; +}; + +&usbdrd3_1 { + status = "okay"; +}; + +&usbdrd_dwc3_1 { + status = "okay"; + dr_mode = "host"; +}; + +&vopb { + status = "okay"; +}; + +&vopb_mmu { + status = "okay"; +}; + +&vopl { + status = "okay"; +}; + +&vopl_mmu { + status = "okay"; +}; diff --git a/dts/src/arm64/rockchip/rk3399-rock960.dts b/dts/src/arm64/rockchip/rk3399-rock960.dts new file mode 100644 index 0000000000..3c3308daec --- /dev/null +++ b/dts/src/arm64/rockchip/rk3399-rock960.dts @@ -0,0 +1,52 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2018 Linaro Ltd. + */ + +/dts-v1/; +#include "rk3399-rock960.dtsi" + +/ { + model = "96boards Rock960"; + compatible = "vamrs,rock960", "rockchip,rk3399"; + + chosen { + stdout-path = "serial2:1500000n8"; + }; +}; + +&pcie0 { + ep-gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_HIGH>; +}; + +&pinctrl { + pcie { + pcie_drv: pcie-drv { + rockchip,pins = + <2 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb2 { + host_vbus_drv: host-vbus-drv { + rockchip,pins = + <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&usbdrd_dwc3_0 { + dr_mode = "otg"; +}; + +&usbdrd_dwc3_1 { + dr_mode = "host"; +}; + +&vcc3v3_pcie { + gpio = <&gpio2 5 GPIO_ACTIVE_HIGH>; +}; + +&vcc5v0_host { + gpio = <&gpio4 25 GPIO_ACTIVE_HIGH>; +}; diff --git a/dts/src/arm64/rockchip/rk3399-rock960.dtsi b/dts/src/arm64/rockchip/rk3399-rock960.dtsi new file mode 100644 index 0000000000..6c8c4ab044 --- /dev/null +++ b/dts/src/arm64/rockchip/rk3399-rock960.dtsi @@ -0,0 +1,542 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2018 Collabora Ltd. + * Copyright (c) 2018 Fuzhou Rockchip Electronics Co., Ltd. + * Copyright (c) 2018 Linaro Ltd. + */ + +#include "rk3399.dtsi" +#include "rk3399-opp.dtsi" + +/ { + vcc1v8_s0: vcc1v8-s0 { + compatible = "regulator-fixed"; + regulator-name = "vcc1v8_s0"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vcc_sys: vcc-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc_sys"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + vcc3v3_sys: vcc3v3-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_sys"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + vin-supply = <&vcc_sys>; + }; + + vcc3v3_pcie: vcc3v3-pcie-regulator { + compatible = "regulator-fixed"; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&pcie_drv>; + regulator-boot-on; + regulator-name = "vcc3v3_pcie"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc3v3_sys>; + }; + + vcc5v0_host: vcc5v0-host-regulator { + compatible = "regulator-fixed"; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&host_vbus_drv>; + regulator-name = "vcc5v0_host"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + vin-supply = <&vcc_sys>; + }; + + vdd_log: vdd-log { + compatible = "pwm-regulator"; + pwms = <&pwm2 0 25000 0>; + regulator-name = "vdd_log"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_sys>; + }; + +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_b0 { + cpu-supply = <&vdd_cpu_b>; +}; + +&cpu_b1 { + cpu-supply = <&vdd_cpu_b>; +}; + +&emmc_phy { + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c3>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_cec>; + status = "okay"; +}; + +&i2c0 { + clock-frequency = <400000>; + i2c-scl-rising-time-ns = <168>; + i2c-scl-falling-time-ns = <4>; + status = "okay"; + + vdd_cpu_b: regulator@40 { + compatible = "silergy,syr827"; + reg = <0x40>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu_b"; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1500000>; + regulator-ramp-delay = <1000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_sys>; + status = "okay"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu: regulator@41 { + compatible = "silergy,syr828"; + reg = <0x41>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_gpu"; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1500000>; + regulator-ramp-delay = <1000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_sys>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + rk808: pmic@1b { + compatible = "rockchip,rk808"; + reg = <0x1b>; + interrupt-parent = <&gpio1>; + interrupts = <21 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l>; + rockchip,system-power-controller; + wakeup-source; + #clock-cells = <1>; + clock-output-names = "xin32k", "rk808-clkout2"; + + vcc1-supply = <&vcc_sys>; + vcc2-supply = <&vcc_sys>; + vcc3-supply = <&vcc_sys>; + vcc4-supply = <&vcc_sys>; + vcc6-supply = <&vcc_sys>; + vcc7-supply = <&vcc_sys>; + vcc8-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc_sys>; + vcc10-supply = <&vcc_sys>; + vcc11-supply = <&vcc_sys>; + vcc12-supply = <&vcc3v3_sys>; + vddio-supply = <&vcc_1v8>; + + regulators { + vdd_center: DCDC_REG1 { + regulator-name = "vdd_center"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_l: DCDC_REG2 { + regulator-name = "vdd_cpu_l"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_1v8: DCDC_REG4 { + regulator-name = "vcc_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc1v8_dvp: LDO_REG1 { + regulator-name = "vcc1v8_dvp"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcca1v8_hdmi: LDO_REG2 { + regulator-name = "vcca1v8_hdmi"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcca_1v8: LDO_REG3 { + regulator-name = "vcca_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc_sd: LDO_REG4 { + regulator-name = "vcc_sd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc3v0_sd: LDO_REG5 { + regulator-name = "vcc3v0_sd"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vcc_1v5: LDO_REG6 { + regulator-name = "vcc_1v5"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1500000>; + }; + }; + + vcca0v9_hdmi: LDO_REG7 { + regulator-name = "vcca0v9_hdmi"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vcc_3v0: LDO_REG8 { + regulator-name = "vcc_3v0"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vcc3v3_s3: SWITCH_REG1 { + regulator-name = "vcc3v3_s3"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc3v3_s0: SWITCH_REG2 { + regulator-name = "vcc3v3_s0"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + }; + }; +}; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; +}; + +&i2c4 { + status = "okay"; +}; + +&io_domains { + bt656-supply = <&vcc1v8_s0>; /* bt656_gpio2ab_ms */ + audio-supply = <&vcc1v8_s0>; /* audio_gpio3d4a_ms */ + sdmmc-supply = <&vcc_sd>; /* sdmmc_gpio4b_ms */ + gpio1830-supply = <&vcc_3v0>; /* gpio1833_gpio4cd_ms */ + status = "okay"; +}; + +&pcie_phy { + status = "okay"; +}; + +&pcie0 { + num-lanes = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie_clkreqn_cpm>; + vpcie3v3-supply = <&vcc3v3_pcie>; + status = "okay"; +}; + +&pmu_io_domains { + pmu1830-supply = <&vcc_1v8>; + status = "okay"; +}; + +&pinctrl { + sdmmc { + sdmmc_bus1: sdmmc-bus1 { + rockchip,pins = + <4 8 RK_FUNC_1 &pcfg_pull_up_8ma>; + }; + + sdmmc_bus4: sdmmc-bus4 { + rockchip,pins = + <4 8 RK_FUNC_1 &pcfg_pull_up_8ma>, + <4 9 RK_FUNC_1 &pcfg_pull_up_8ma>, + <4 10 RK_FUNC_1 &pcfg_pull_up_8ma>, + <4 11 RK_FUNC_1 &pcfg_pull_up_8ma>; + }; + + sdmmc_clk: sdmmc-clk { + rockchip,pins = + <4 12 RK_FUNC_1 &pcfg_pull_none_18ma>; + }; + + sdmmc_cmd: sdmmc-cmd { + rockchip,pins = + <4 13 RK_FUNC_1 &pcfg_pull_up_8ma>; + }; + }; + + pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = + <1 21 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + vsel1_gpio: vsel1-gpio { + rockchip,pins = + <1 17 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + vsel2_gpio: vsel2-gpio { + rockchip,pins = + <1 14 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; +}; + +&pwm2 { + status = "okay"; +}; + +&pwm3 { + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + non-removable; + status = "okay"; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + clock-frequency = <100000000>; + clock-freq-min-max = <100000 100000000>; + cd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; + disable-wp; + sd-uhs-sdr104; + vqmmc-supply = <&vcc_sd>; + card-detect-delay = <800>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer &uart0_cts>; + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&tcphy0 { + status = "okay"; +}; + +&tcphy1 { + status = "okay"; +}; + +&u2phy0 { + status = "okay"; +}; + +&u2phy1 { + status = "okay"; +}; + +&u2phy0_host { + phy-supply = <&vcc5v0_host>; + status = "okay"; +}; + +&u2phy1_host { + phy-supply = <&vcc5v0_host>; + status = "okay"; +}; + +&u2phy0_otg { + status = "okay"; +}; + +&u2phy1_otg { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +&usbdrd3_0 { + status = "okay"; +}; + +&usbdrd_dwc3_0 { + status = "okay"; +}; + +&usbdrd3_1 { + status = "okay"; +}; + +&usbdrd_dwc3_1 { + status = "okay"; +}; + +&vopb { + status = "okay"; +}; + +&vopb_mmu { + status = "okay"; +}; + +&vopl { + status = "okay"; +}; + +&vopl_mmu { + status = "okay"; +}; diff --git a/dts/src/arm64/rockchip/rk3399-rockpro64.dts b/dts/src/arm64/rockchip/rk3399-rockpro64.dts new file mode 100644 index 0000000000..1d35f5406b --- /dev/null +++ b/dts/src/arm64/rockchip/rk3399-rockpro64.dts @@ -0,0 +1,692 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd. + * Copyright (c) 2018 Akash Gajjar <Akash_Gajjar@mentor.com> + */ + +/dts-v1/; +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/pwm/pwm.h> +#include "rk3399.dtsi" +#include "rk3399-opp.dtsi" + +/ { + model = "Pine64 RockPro64"; + compatible = "pine64,rockpro64", "rockchip,rk3399"; + + chosen { + stdout-path = "serial2:1500000n8"; + }; + + clkin_gmac: external-gmac-clock { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "clkin_gmac"; + #clock-cells = <0>; + }; + + dc_12v: dc-12v { + compatible = "regulator-fixed"; + regulator-name = "dc_12v"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + autorepeat; + pinctrl-names = "default"; + pinctrl-0 = <&pwrbtn>; + + power { + debounce-interval = <100>; + gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; + label = "GPIO Key Power"; + linux,code = <KEY_POWER>; + wakeup-source; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&work_led_gpio>, <&diy_led_gpio>; + + work-led { + label = "work"; + default-state = "on"; + gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>; + }; + + diy-led { + label = "diy"; + default-state = "off"; + gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>; + }; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&rk808 1>; + clock-names = "ext_clock"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_enable_h>; + + /* + * On the module itself this is one of these (depending + * on the actual card populated): + * - SDIO_RESET_L_WL_REG_ON + * - PDN (power down when low) + */ + reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; + }; + + /* switched by pmic_sleep */ + vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 { + compatible = "regulator-fixed"; + regulator-name = "vcc1v8_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_1v8>; + }; + + vcc3v3_pcie: vcc3v3-pcie-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie_pwr_en>; + regulator-name = "vcc3v3_pcie"; + regulator-always-on; + regulator-boot-on; + vin-supply = <&dc_12v>; + }; + + vcc3v3_sys: vcc3v3-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_sys>; + }; + + /* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */ + vcc5v0_host: vcc5v0-host-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_host_en>; + regulator-name = "vcc5v0_host"; + regulator-always-on; + vin-supply = <&vcc_sys>; + }; + + vcc5v0_typec: vcc5v0-typec-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_typec_en>; + regulator-name = "vcc5v0_typec"; + regulator-always-on; + vin-supply = <&vcc_sys>; + }; + + vcc_sys: vcc-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&dc_12v>; + }; + + vdd_log: vdd-log { + compatible = "pwm-regulator"; + pwms = <&pwm2 0 25000 1>; + regulator-name = "vdd_log"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + vin-supply = <&vcc_sys>; + }; +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_b0 { + cpu-supply = <&vdd_cpu_b>; +}; + +&cpu_b1 { + cpu-supply = <&vdd_cpu_b>; +}; + +&emmc_phy { + status = "okay"; +}; + +&gmac { + assigned-clocks = <&cru SCLK_RMII_SRC>; + assigned-clock-parents = <&clkin_gmac>; + clock_in_out = "input"; + phy-supply = <&vcc_lan>; + phy-mode = "rgmii"; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>; + snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 50000>; + tx_delay = <0x28>; + rx_delay = <0x11>; + status = "okay"; +}; + +&i2c0 { + clock-frequency = <400000>; + i2c-scl-rising-time-ns = <168>; + i2c-scl-falling-time-ns = <4>; + status = "okay"; + + rk808: pmic@1b { + compatible = "rockchip,rk808"; + reg = <0x1b>; + interrupt-parent = <&gpio1>; + interrupts = <21 IRQ_TYPE_LEVEL_LOW>; + #clock-cells = <1>; + clock-output-names = "xin32k", "rk808-clkout2"; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l>; + rockchip,system-power-controller; + wakeup-source; + + vcc1-supply = <&vcc_sys>; + vcc2-supply = <&vcc_sys>; + vcc3-supply = <&vcc_sys>; + vcc4-supply = <&vcc_sys>; + vcc6-supply = <&vcc_sys>; + vcc7-supply = <&vcc_sys>; + vcc8-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc_sys>; + vcc10-supply = <&vcc_sys>; + vcc11-supply = <&vcc_sys>; + vcc12-supply = <&vcc3v3_sys>; + vddio-supply = <&vcc1v8_pmu>; + + regulators { + vdd_center: DCDC_REG1 { + regulator-name = "vdd_center"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_l: DCDC_REG2 { + regulator-name = "vdd_cpu_l"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_1v8: DCDC_REG4 { + regulator-name = "vcc_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc1v8_dvp: LDO_REG1 { + regulator-name = "vcc1v8_dvp"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc2v8_dvp: LDO_REG2 { + regulator-name = "vcc2v8_dvp"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc1v8_pmu: LDO_REG3 { + regulator-name = "vcc1v8_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc_sdio: LDO_REG4 { + regulator-name = "vcc_sdio"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vcca3v0_codec: LDO_REG5 { + regulator-name = "vcca3v0_codec"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v5: LDO_REG6 { + regulator-name = "vcc_1v5"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1500000>; + }; + }; + + vcca1v8_codec: LDO_REG7 { + regulator-name = "vcca1v8_codec"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v0: LDO_REG8 { + regulator-name = "vcc_3v0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vcc3v3_s3: vcc_lan: SWITCH_REG1 { + regulator-name = "vcc3v3_s3"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_s0: SWITCH_REG2 { + regulator-name = "vcc3v3_s0"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; + + vdd_cpu_b: regulator@40 { + compatible = "silergy,syr827"; + reg = <0x40>; + fcs,suspend-voltage-selector = <0>; + regulator-name = "vdd_cpu_b"; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1500000>; + regulator-ramp-delay = <1000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu: regulator@41 { + compatible = "silergy,syr828"; + reg = <0x41>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_gpu"; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1500000>; + regulator-ramp-delay = <1000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&i2c1 { + i2c-scl-rising-time-ns = <300>; + i2c-scl-falling-time-ns = <15>; + status = "okay"; +}; + +&i2c3 { + i2c-scl-rising-time-ns = <450>; + i2c-scl-falling-time-ns = <15>; + status = "okay"; +}; + +&i2c4 { + i2c-scl-rising-time-ns = <600>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; + + fusb0: typec-portc@22 { + compatible = "fcs,fusb302"; + reg = <0x22>; + interrupt-parent = <&gpio1>; + interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&fusb0_int>; + vbus-supply = <&vcc5v0_typec>; + status = "okay"; + }; +}; + +&i2s0 { + rockchip,playback-channels = <8>; + rockchip,capture-channels = <8>; + status = "okay"; +}; + +&i2s1 { + rockchip,playback-channels = <2>; + rockchip,capture-channels = <2>; + status = "okay"; +}; + +&i2s2 { + status = "okay"; +}; + +&io_domains { + status = "okay"; + + bt656-supply = <&vcc1v8_dvp>; + audio-supply = <&vcca1v8_codec>; + sdmmc-supply = <&vcc_sdio>; + gpio1830-supply = <&vcc_3v0>; +}; + +&pmu_io_domains { + pmu1830-supply = <&vcc_3v0>; + status = "okay"; +}; + +&pinctrl { + buttons { + pwrbtn: pwrbtn { + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + fusb302x { + fusb0_int: fusb0-int { + rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + leds { + work_led_gpio: work_led-gpio { + rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + diy_led_gpio: diy_led-gpio { + rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + lcd-panel { + lcd_panel_reset: lcd-panel-reset { + rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + pcie { + pcie_pwr_en: pcie-pwr-en { + rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + vsel1_gpio: vsel1-gpio { + rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + vsel2_gpio: vsel2-gpio { + rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + + sdio-pwrseq { + wifi_enable_h: wifi-enable-h { + rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb-typec { + vcc5v0_typec_en: vcc5v0_typec_en { + rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + usb2 { + vcc5v0_host_en: vcc5v0-host-en { + rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pwm0 { + status = "okay"; +}; + +&pwm2 { + status = "okay"; +}; + +&saradc { + vref-supply = <&vcca1v8_s3>; + status = "okay"; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + cd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; + disable-wp; + max-frequency = <150000000>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>; + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + non-removable; + status = "okay"; +}; + +&tcphy0 { + status = "okay"; +}; + +&tcphy1 { + status = "okay"; +}; + +&tsadc { + /* tshut mode 0:CRU 1:GPIO */ + rockchip,hw-tshut-mode = <1>; + /* tshut polarity 0:LOW 1:HIGH */ + rockchip,hw-tshut-polarity = <1>; + status = "okay"; +}; + +&u2phy0 { + status = "okay"; + + u2phy0_otg: otg-port { + status = "okay"; + }; + + u2phy0_host: host-port { + phy-supply = <&vcc5v0_host>; + status = "okay"; + }; +}; + +&u2phy1 { + status = "okay"; + + u2phy1_otg: otg-port { + status = "okay"; + }; + + u2phy1_host: host-port { + phy-supply = <&vcc5v0_host>; + status = "okay"; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer &uart0_cts>; + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +&usbdrd3_0 { + status = "okay"; +}; + +&usbdrd_dwc3_0 { + status = "okay"; + dr_mode = "otg"; +}; + +&usbdrd3_1 { + status = "okay"; +}; + +&usbdrd_dwc3_1 { + status = "okay"; + dr_mode = "host"; +}; + +&vopb { + status = "okay"; +}; + +&vopb_mmu { + status = "okay"; +}; + +&vopl { + status = "okay"; +}; + +&vopl_mmu { + status = "okay"; +}; diff --git a/dts/src/arm64/rockchip/rk3399-sapphire.dtsi b/dts/src/arm64/rockchip/rk3399-sapphire.dtsi index 36b60791c1..5421e23760 100644 --- a/dts/src/arm64/rockchip/rk3399-sapphire.dtsi +++ b/dts/src/arm64/rockchip/rk3399-sapphire.dtsi @@ -93,6 +93,19 @@ vin-supply = <&vcc_1v8>; }; + vcc3v0_sd: vcc3v0-sd { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc0_pwr_h>; + regulator-always-on; + regulator-max-microvolt = <3000000>; + regulator-min-microvolt = <3000000>; + regulator-name = "vcc3v0_sd"; + vin-supply = <&vcc3v3_sys>; + }; + vcc3v3_sys: vcc3v3-sys { compatible = "regulator-fixed"; regulator-name = "vcc3v3_sys"; @@ -103,20 +116,10 @@ vin-supply = <&vcc_sys>; }; - vcc_sys: vcc-sys { - compatible = "regulator-fixed"; - regulator-name = "vcc_sys"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&dc_12v>; - }; - vcc5v0_host: vcc5v0-host-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio1 RK_PD1 GPIO_ACTIVE_HIGH>; + gpio = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&vcc5v0_host_en>; regulator-name = "vcc5v0_host"; @@ -124,6 +127,26 @@ vin-supply = <&vcc_sys>; }; + vcc5v0_typec0: vcc5v0-typec0-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio2 RK_PA0 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_typec0_en>; + regulator-name = "vcc5v0_typec0"; + vin-supply = <&vcc_sys>; + }; + + vcc_sys: vcc-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&dc_12v>; + }; + vdd_log: vdd-log { compatible = "pwm-regulator"; pwms = <&pwm2 0 25000 1>; @@ -208,7 +231,7 @@ #clock-cells = <1>; clock-output-names = "xin32k", "rk808-clkout2"; pinctrl-names = "default"; - pinctrl-0 = <&pmic_int_l &pmic_dvs2>; + pinctrl-0 = <&pmic_int_l>; rockchip,system-power-controller; wakeup-source; @@ -310,7 +333,7 @@ regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; regulator-state-mem { regulator-on-in-suspend; regulator-suspend-microvolt = <3000000>; @@ -455,11 +478,6 @@ <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; }; - pmic_dvs2: pmic-dvs2 { - rockchip,pins = - <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>; - }; - vsel1_gpio: vsel1-gpio { rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; }; @@ -469,11 +487,22 @@ }; }; + sd { + sdmmc0_pwr_h: sdmmc0-pwr-h { + rockchip,pins = + <RK_GPIO0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + usb2 { vcc5v0_host_en: vcc5v0-host-en { rockchip,pins = <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>; }; + vcc5v0_typec0_en: vcc5v0-typec0-en { + rockchip,pins = + <2 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; + }; }; }; @@ -499,6 +528,7 @@ }; &sdmmc { + broken-cd; bus-width = <4>; cap-mmc-highspeed; cap-sd-highspeed; @@ -507,6 +537,7 @@ max-frequency = <150000000>; pinctrl-names = "default"; pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; + vmmc-supply = <&vcc3v0_sd>; vqmmc-supply = <&vcc_sdio>; status = "okay"; }; @@ -531,6 +562,7 @@ status = "okay"; u2phy0_otg: otg-port { + phy-supply = <&vcc5v0_typec0>; status = "okay"; }; diff --git a/dts/src/arm64/rockchip/rk3399.dtsi b/dts/src/arm64/rockchip/rk3399.dtsi index c88e603396..99e7f65c17 100644 --- a/dts/src/arm64/rockchip/rk3399.dtsi +++ b/dts/src/arm64/rockchip/rk3399.dtsi @@ -74,6 +74,7 @@ clocks = <&cru ARMCLKL>; #cooling-cells = <2>; /* min followed by max */ dynamic-power-coefficient = <100>; + cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; }; cpu_l1: cpu@1 { @@ -84,6 +85,7 @@ clocks = <&cru ARMCLKL>; #cooling-cells = <2>; /* min followed by max */ dynamic-power-coefficient = <100>; + cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; }; cpu_l2: cpu@2 { @@ -94,6 +96,7 @@ clocks = <&cru ARMCLKL>; #cooling-cells = <2>; /* min followed by max */ dynamic-power-coefficient = <100>; + cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; }; cpu_l3: cpu@3 { @@ -104,6 +107,7 @@ clocks = <&cru ARMCLKL>; #cooling-cells = <2>; /* min followed by max */ dynamic-power-coefficient = <100>; + cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; }; cpu_b0: cpu@100 { @@ -114,6 +118,7 @@ clocks = <&cru ARMCLKB>; #cooling-cells = <2>; /* min followed by max */ dynamic-power-coefficient = <436>; + cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; }; cpu_b1: cpu@101 { @@ -124,6 +129,29 @@ clocks = <&cru ARMCLKB>; #cooling-cells = <2>; /* min followed by max */ dynamic-power-coefficient = <436>; + cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; + }; + + idle-states { + entry-method = "psci"; + + CPU_SLEEP: cpu-sleep { + compatible = "arm,idle-state"; + local-timer-stop; + arm,psci-suspend-param = <0x0010000>; + entry-latency-us = <120>; + exit-latency-us = <250>; + min-residency-us = <900>; + }; + + CLUSTER_SLEEP: cluster-sleep { + compatible = "arm,idle-state"; + local-timer-stop; + arm,psci-suspend-param = <0x1010000>; + entry-latency-us = <400>; + exit-latency-us = <500>; + min-residency-us = <2000>; + }; }; }; @@ -1720,6 +1748,8 @@ resets = <&cru SRST_P_MIPI_DSI0>; reset-names = "apb"; rockchip,grf = <&grf>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; ports { @@ -1754,6 +1784,8 @@ resets = <&cru SRST_P_MIPI_DSI1>; reset-names = "apb"; rockchip,grf = <&grf>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; ports { diff --git a/dts/src/arm64/socionext/uniphier-ld11.dtsi b/dts/src/arm64/socionext/uniphier-ld11.dtsi index d63b56e944..31ba52b14e 100644 --- a/dts/src/arm64/socionext/uniphier-ld11.dtsi +++ b/dts/src/arm64/socionext/uniphier-ld11.dtsi @@ -116,6 +116,28 @@ #size-cells = <1>; ranges = <0 0 0 0xffffffff>; + spi0: spi@54006000 { + compatible = "socionext,uniphier-scssi"; + status = "disabled"; + reg = <0x54006000 0x100>; + interrupts = <0 39 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi0>; + clocks = <&peri_clk 11>; + resets = <&peri_rst 11>; + }; + + spi1: spi@54006100 { + compatible = "socionext,uniphier-scssi"; + status = "disabled"; + reg = <0x54006100 0x100>; + interrupts = <0 216 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1>; + clocks = <&peri_clk 11>; + resets = <&peri_rst 11>; + }; + serial0: serial@54006800 { compatible = "socionext,uniphier-uart"; status = "disabled"; @@ -432,6 +454,8 @@ <&mio_clk 12>; resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 8>, <&mio_rst 12>; + phy-names = "usb"; + phys = <&usb_phy0>; has-transaction-translator; }; @@ -446,6 +470,8 @@ <&mio_clk 13>; resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 9>, <&mio_rst 13>; + phy-names = "usb"; + phys = <&usb_phy1>; has-transaction-translator; }; @@ -460,6 +486,8 @@ <&mio_clk 14>; resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 10>, <&mio_rst 14>; + phy-names = "usb"; + phys = <&usb_phy2>; has-transaction-translator; }; @@ -488,6 +516,27 @@ pinctrl: pinctrl { compatible = "socionext,uniphier-ld11-pinctrl"; }; + + usb-phy { + compatible = "socionext,uniphier-ld11-usb2-phy"; + #address-cells = <1>; + #size-cells = <0>; + + usb_phy0: phy@0 { + reg = <0>; + #phy-cells = <0>; + }; + + usb_phy1: phy@1 { + reg = <1>; + #phy-cells = <0>; + }; + + usb_phy2: phy@2 { + reg = <2>; + #phy-cells = <0>; + }; + }; }; soc-glue@5f900000 { @@ -571,7 +620,8 @@ interrupts = <0 65 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_nand>; - clocks = <&sys_clk 2>; + clock-names = "nand", "nand_x", "ecc"; + clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>; resets = <&sys_rst 2>; }; }; diff --git a/dts/src/arm64/socionext/uniphier-ld20-global.dts b/dts/src/arm64/socionext/uniphier-ld20-global.dts index 1a5e7c24b9..d7ae28afef 100644 --- a/dts/src/arm64/socionext/uniphier-ld20-global.dts +++ b/dts/src/arm64/socionext/uniphier-ld20-global.dts @@ -148,3 +148,7 @@ &nand { status = "okay"; }; + +&usb { + status = "okay"; +}; diff --git a/dts/src/arm64/socionext/uniphier-ld20-ref.dts b/dts/src/arm64/socionext/uniphier-ld20-ref.dts index 440c2e6a63..406244a5c8 100644 --- a/dts/src/arm64/socionext/uniphier-ld20-ref.dts +++ b/dts/src/arm64/socionext/uniphier-ld20-ref.dts @@ -75,3 +75,7 @@ drive-strength = <9>; }; }; + +&usb { + status = "okay"; +}; diff --git a/dts/src/arm64/socionext/uniphier-ld20.dtsi b/dts/src/arm64/socionext/uniphier-ld20.dtsi index caf112629c..d7e2d89696 100644 --- a/dts/src/arm64/socionext/uniphier-ld20.dtsi +++ b/dts/src/arm64/socionext/uniphier-ld20.dtsi @@ -224,6 +224,50 @@ #size-cells = <1>; ranges = <0 0 0 0xffffffff>; + spi0: spi@54006000 { + compatible = "socionext,uniphier-scssi"; + status = "disabled"; + reg = <0x54006000 0x100>; + interrupts = <0 39 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi0>; + clocks = <&peri_clk 11>; + resets = <&peri_rst 11>; + }; + + spi1: spi@54006100 { + compatible = "socionext,uniphier-scssi"; + status = "disabled"; + reg = <0x54006100 0x100>; + interrupts = <0 216 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1>; + clocks = <&peri_clk 11>; + resets = <&peri_rst 11>; + }; + + spi2: spi@54006200 { + compatible = "socionext,uniphier-scssi"; + status = "disabled"; + reg = <0x54006200 0x100>; + interrupts = <0 229 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi2>; + clocks = <&peri_clk 11>; + resets = <&peri_rst 11>; + }; + + spi3: spi@54006300 { + compatible = "socionext,uniphier-scssi"; + status = "disabled"; + reg = <0x54006300 0x100>; + interrupts = <0 230 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi3>; + clocks = <&peri_clk 11>; + resets = <&peri_rst 11>; + }; + serial0: serial@54006800 { compatible = "socionext,uniphier-uart"; status = "disabled"; @@ -528,6 +572,20 @@ cdns,phy-dll-delay-sdclk-hsmmc = <21>; }; + sd: sdhc@5a400000 { + compatible = "socionext,uniphier-sd-v3.1.1"; + status = "disabled"; + reg = <0x5a400000 0x800>; + interrupts = <0 76 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sd>; + clocks = <&sd_clk 0>; + reset-names = "host"; + resets = <&sd_rst 0>; + bus-width = <4>; + cap-sd-highspeed; + }; + soc_glue: soc-glue@5f800000 { compatible = "socionext,uniphier-ld20-soc-glue", "simple-mfd", "syscon"; @@ -553,6 +611,50 @@ efuse@200 { compatible = "socionext,uniphier-efuse"; reg = <0x200 0x68>; + #address-cells = <1>; + #size-cells = <1>; + + /* USB cells */ + usb_rterm0: trim@54,4 { + reg = <0x54 1>; + bits = <4 2>; + }; + usb_rterm1: trim@55,4 { + reg = <0x55 1>; + bits = <4 2>; + }; + usb_rterm2: trim@58,4 { + reg = <0x58 1>; + bits = <4 2>; + }; + usb_rterm3: trim@59,4 { + reg = <0x59 1>; + bits = <4 2>; + }; + usb_sel_t0: trim@54,0 { + reg = <0x54 1>; + bits = <0 4>; + }; + usb_sel_t1: trim@55,0 { + reg = <0x55 1>; + bits = <0 4>; + }; + usb_sel_t2: trim@58,0 { + reg = <0x58 1>; + bits = <0 4>; + }; + usb_sel_t3: trim@59,0 { + reg = <0x59 1>; + bits = <0 4>; + }; + usb_hs_i0: trim@56,0 { + reg = <0x56 1>; + bits = <0 4>; + }; + usb_hs_i2: trim@5a,0 { + reg = <0x5a 1>; + bits = <0 4>; + }; }; }; @@ -620,6 +722,156 @@ }; }; + usb: usb@65a00000 { + compatible = "socionext,uniphier-dwc3", "snps,dwc3"; + status = "disabled"; + reg = <0x65a00000 0xcd00>; + interrupt-names = "host"; + interrupts = <0 134 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb0>, <&pinctrl_usb1>, + <&pinctrl_usb2>, <&pinctrl_usb3>; + clock-names = "ref", "bus_early", "suspend"; + clocks = <&sys_clk 14>, <&sys_clk 14>, <&sys_clk 14>; + resets = <&usb_rst 15>; + phys = <&usb_hsphy0>, <&usb_hsphy1>, + <&usb_hsphy2>, <&usb_hsphy3>, + <&usb_ssphy0>, <&usb_ssphy1>; + dr_mode = "host"; + }; + + usb-glue@65b00000 { + compatible = "socionext,uniphier-ld20-dwc3-glue", + "simple-mfd"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x65b00000 0x400>; + + usb_rst: reset@0 { + compatible = "socionext,uniphier-ld20-usb3-reset"; + reg = <0x0 0x4>; + #reset-cells = <1>; + clock-names = "link"; + clocks = <&sys_clk 14>; + reset-names = "link"; + resets = <&sys_rst 14>; + }; + + usb_vbus0: regulator@100 { + compatible = "socionext,uniphier-ld20-usb3-regulator"; + reg = <0x100 0x10>; + clock-names = "link"; + clocks = <&sys_clk 14>; + reset-names = "link"; + resets = <&sys_rst 14>; + }; + + usb_vbus1: regulator@110 { + compatible = "socionext,uniphier-ld20-usb3-regulator"; + reg = <0x110 0x10>; + clock-names = "link"; + clocks = <&sys_clk 14>; + reset-names = "link"; + resets = <&sys_rst 14>; + }; + + usb_vbus2: regulator@120 { + compatible = "socionext,uniphier-ld20-usb3-regulator"; + reg = <0x120 0x10>; + clock-names = "link"; + clocks = <&sys_clk 14>; + reset-names = "link"; + resets = <&sys_rst 14>; + }; + + usb_vbus3: regulator@130 { + compatible = "socionext,uniphier-ld20-usb3-regulator"; + reg = <0x130 0x10>; + clock-names = "link"; + clocks = <&sys_clk 14>; + reset-names = "link"; + resets = <&sys_rst 14>; + }; + + usb_hsphy0: hs-phy@200 { + compatible = "socionext,uniphier-ld20-usb3-hsphy"; + reg = <0x200 0x10>; + #phy-cells = <0>; + clock-names = "link", "phy"; + clocks = <&sys_clk 14>, <&sys_clk 16>; + reset-names = "link", "phy"; + resets = <&sys_rst 14>, <&sys_rst 16>; + vbus-supply = <&usb_vbus0>; + nvmem-cell-names = "rterm", "sel_t", "hs_i"; + nvmem-cells = <&usb_rterm0>, <&usb_sel_t0>, + <&usb_hs_i0>; + }; + + usb_hsphy1: hs-phy@210 { + compatible = "socionext,uniphier-ld20-usb3-hsphy"; + reg = <0x210 0x10>; + #phy-cells = <0>; + clock-names = "link", "phy"; + clocks = <&sys_clk 14>, <&sys_clk 16>; + reset-names = "link", "phy"; + resets = <&sys_rst 14>, <&sys_rst 16>; + vbus-supply = <&usb_vbus1>; + nvmem-cell-names = "rterm", "sel_t", "hs_i"; + nvmem-cells = <&usb_rterm1>, <&usb_sel_t1>, + <&usb_hs_i0>; + }; + + usb_hsphy2: hs-phy@220 { + compatible = "socionext,uniphier-ld20-usb3-hsphy"; + reg = <0x220 0x10>; + #phy-cells = <0>; + clock-names = "link", "phy"; + clocks = <&sys_clk 14>, <&sys_clk 17>; + reset-names = "link", "phy"; + resets = <&sys_rst 14>, <&sys_rst 17>; + vbus-supply = <&usb_vbus2>; + nvmem-cell-names = "rterm", "sel_t", "hs_i"; + nvmem-cells = <&usb_rterm2>, <&usb_sel_t2>, + <&usb_hs_i2>; + }; + + usb_hsphy3: hs-phy@230 { + compatible = "socionext,uniphier-ld20-usb3-hsphy"; + reg = <0x230 0x10>; + #phy-cells = <0>; + clock-names = "link", "phy"; + clocks = <&sys_clk 14>, <&sys_clk 17>; + reset-names = "link", "phy"; + resets = <&sys_rst 14>, <&sys_rst 17>; + vbus-supply = <&usb_vbus3>; + nvmem-cell-names = "rterm", "sel_t", "hs_i"; + nvmem-cells = <&usb_rterm3>, <&usb_sel_t3>, + <&usb_hs_i2>; + }; + + usb_ssphy0: ss-phy@300 { + compatible = "socionext,uniphier-ld20-usb3-ssphy"; + reg = <0x300 0x10>; + #phy-cells = <0>; + clock-names = "link", "phy"; + clocks = <&sys_clk 14>, <&sys_clk 18>; + reset-names = "link", "phy"; + resets = <&sys_rst 14>, <&sys_rst 18>; + vbus-supply = <&usb_vbus0>; + }; + + usb_ssphy1: ss-phy@310 { + compatible = "socionext,uniphier-ld20-usb3-ssphy"; + reg = <0x310 0x10>; + #phy-cells = <0>; + clock-names = "link", "phy"; + clocks = <&sys_clk 14>, <&sys_clk 19>; + reset-names = "link", "phy"; + resets = <&sys_rst 14>, <&sys_rst 19>; + vbus-supply = <&usb_vbus1>; + }; + }; + nand: nand@68000000 { compatible = "socionext,uniphier-denali-nand-v5b"; status = "disabled"; @@ -628,7 +880,8 @@ interrupts = <0 65 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_nand>; - clocks = <&sys_clk 2>; + clock-names = "nand", "nand_x", "ecc"; + clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>; resets = <&sys_rst 2>; }; }; diff --git a/dts/src/arm64/socionext/uniphier-pxs3-ref.dts b/dts/src/arm64/socionext/uniphier-pxs3-ref.dts index c1bb607bd2..a41f7cac95 100644 --- a/dts/src/arm64/socionext/uniphier-pxs3-ref.dts +++ b/dts/src/arm64/socionext/uniphier-pxs3-ref.dts @@ -75,6 +75,10 @@ status = "okay"; }; +&sd { + status = "okay"; +}; + ð0 { status = "okay"; phy-handle = <ðphy0>; @@ -100,3 +104,11 @@ &nand { status = "okay"; }; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; diff --git a/dts/src/arm64/socionext/uniphier-pxs3.dtsi b/dts/src/arm64/socionext/uniphier-pxs3.dtsi index 2a4cf427f5..4f57c9e9d7 100644 --- a/dts/src/arm64/socionext/uniphier-pxs3.dtsi +++ b/dts/src/arm64/socionext/uniphier-pxs3.dtsi @@ -144,6 +144,28 @@ #size-cells = <1>; ranges = <0 0 0 0xffffffff>; + spi0: spi@54006000 { + compatible = "socionext,uniphier-scssi"; + status = "disabled"; + reg = <0x54006000 0x100>; + interrupts = <0 39 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi0>; + clocks = <&peri_clk 11>; + resets = <&peri_rst 11>; + }; + + spi1: spi@54006100 { + compatible = "socionext,uniphier-scssi"; + status = "disabled"; + reg = <0x54006100 0x100>; + interrupts = <0 216 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1>; + clocks = <&peri_clk 11>; + resets = <&peri_rst 11>; + }; + serial0: serial@54006800 { compatible = "socionext,uniphier-uart"; status = "disabled"; @@ -341,6 +363,24 @@ cdns,phy-dll-delay-sdclk-hsmmc = <21>; }; + sd: sdhc@5a400000 { + compatible = "socionext,uniphier-sd-v3.1.1"; + status = "disabled"; + reg = <0x5a400000 0x800>; + interrupts = <0 76 4>; + pinctrl-names = "default", "uhs"; + pinctrl-0 = <&pinctrl_sd>; + pinctrl-1 = <&pinctrl_sd_uhs>; + clocks = <&sd_clk 0>; + reset-names = "host"; + resets = <&sd_rst 0>; + bus-width = <4>; + cap-sd-highspeed; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + }; + soc_glue: soc-glue@5f800000 { compatible = "socionext,uniphier-pxs3-soc-glue", "simple-mfd", "syscon"; @@ -366,6 +406,50 @@ efuse@200 { compatible = "socionext,uniphier-efuse"; reg = <0x200 0x68>; + #address-cells = <1>; + #size-cells = <1>; + + /* USB cells */ + usb_rterm0: trim@54,4 { + reg = <0x54 1>; + bits = <4 2>; + }; + usb_rterm1: trim@55,4 { + reg = <0x55 1>; + bits = <4 2>; + }; + usb_rterm2: trim@58,4 { + reg = <0x58 1>; + bits = <4 2>; + }; + usb_rterm3: trim@59,4 { + reg = <0x59 1>; + bits = <4 2>; + }; + usb_sel_t0: trim@54,0 { + reg = <0x54 1>; + bits = <0 4>; + }; + usb_sel_t1: trim@55,0 { + reg = <0x55 1>; + bits = <0 4>; + }; + usb_sel_t2: trim@58,0 { + reg = <0x58 1>; + bits = <0 4>; + }; + usb_sel_t3: trim@59,0 { + reg = <0x59 1>; + bits = <0 4>; + }; + usb_hs_i0: trim@56,0 { + reg = <0x56 1>; + bits = <0 4>; + }; + usb_hs_i2: trim@5a,0 { + reg = <0x5a 1>; + bits = <0 4>; + }; }; }; @@ -447,6 +531,202 @@ }; }; + usb0: usb@65a00000 { + compatible = "socionext,uniphier-dwc3", "snps,dwc3"; + status = "disabled"; + reg = <0x65a00000 0xcd00>; + interrupt-names = "host", "peripheral"; + interrupts = <0 134 4>, <0 135 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb0>, <&pinctrl_usb2>; + clock-names = "ref", "bus_early", "suspend"; + clocks = <&sys_clk 12>, <&sys_clk 12>, <&sys_clk 12>; + resets = <&usb0_rst 15>; + phys = <&usb0_hsphy0>, <&usb0_hsphy1>, + <&usb0_ssphy0>, <&usb0_ssphy1>; + dr_mode = "host"; + }; + + usb-glue@65b00000 { + compatible = "socionext,uniphier-pxs3-dwc3-glue", + "simple-mfd"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x65b00000 0x400>; + + usb0_rst: reset@0 { + compatible = "socionext,uniphier-pxs3-usb3-reset"; + reg = <0x0 0x4>; + #reset-cells = <1>; + clock-names = "link"; + clocks = <&sys_clk 12>; + reset-names = "link"; + resets = <&sys_rst 12>; + }; + + usb0_vbus0: regulator@100 { + compatible = "socionext,uniphier-pxs3-usb3-regulator"; + reg = <0x100 0x10>; + clock-names = "link"; + clocks = <&sys_clk 12>; + reset-names = "link"; + resets = <&sys_rst 12>; + }; + + usb0_vbus1: regulator@110 { + compatible = "socionext,uniphier-pxs3-usb3-regulator"; + reg = <0x110 0x10>; + clock-names = "link"; + clocks = <&sys_clk 12>; + reset-names = "link"; + resets = <&sys_rst 12>; + }; + + usb0_hsphy0: hs-phy@200 { + compatible = "socionext,uniphier-pxs3-usb3-hsphy"; + reg = <0x200 0x10>; + #phy-cells = <0>; + clock-names = "link", "phy"; + clocks = <&sys_clk 12>, <&sys_clk 16>; + reset-names = "link", "phy"; + resets = <&sys_rst 12>, <&sys_rst 16>; + vbus-supply = <&usb0_vbus0>; + nvmem-cell-names = "rterm", "sel_t", "hs_i"; + nvmem-cells = <&usb_rterm0>, <&usb_sel_t0>, + <&usb_hs_i0>; + }; + + usb0_hsphy1: hs-phy@210 { + compatible = "socionext,uniphier-pxs3-usb3-hsphy"; + reg = <0x210 0x10>; + #phy-cells = <0>; + clock-names = "link", "phy"; + clocks = <&sys_clk 12>, <&sys_clk 16>; + reset-names = "link", "phy"; + resets = <&sys_rst 12>, <&sys_rst 16>; + vbus-supply = <&usb0_vbus1>; + nvmem-cell-names = "rterm", "sel_t", "hs_i"; + nvmem-cells = <&usb_rterm1>, <&usb_sel_t1>, + <&usb_hs_i0>; + }; + + usb0_ssphy0: ss-phy@300 { + compatible = "socionext,uniphier-pxs3-usb3-ssphy"; + reg = <0x300 0x10>; + #phy-cells = <0>; + clock-names = "link", "phy"; + clocks = <&sys_clk 12>, <&sys_clk 17>; + reset-names = "link", "phy"; + resets = <&sys_rst 12>, <&sys_rst 17>; + vbus-supply = <&usb0_vbus0>; + }; + + usb0_ssphy1: ss-phy@310 { + compatible = "socionext,uniphier-pxs3-usb3-ssphy"; + reg = <0x310 0x10>; + #phy-cells = <0>; + clock-names = "link", "phy"; + clocks = <&sys_clk 12>, <&sys_clk 18>; + reset-names = "link", "phy"; + resets = <&sys_rst 12>, <&sys_rst 18>; + vbus-supply = <&usb0_vbus1>; + }; + }; + + usb1: usb@65c00000 { + compatible = "socionext,uniphier-dwc3", "snps,dwc3"; + status = "disabled"; + reg = <0x65c00000 0xcd00>; + interrupt-names = "host", "peripheral"; + interrupts = <0 137 4>, <0 138 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb1>, <&pinctrl_usb3>; + clock-names = "ref", "bus_early", "suspend"; + clocks = <&sys_clk 13>, <&sys_clk 13>, <&sys_clk 13>; + resets = <&usb1_rst 15>; + phys = <&usb1_hsphy0>, <&usb1_hsphy1>, + <&usb1_ssphy0>; + dr_mode = "host"; + }; + + usb-glue@65d00000 { + compatible = "socionext,uniphier-pxs3-dwc3-glue", + "simple-mfd"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x65d00000 0x400>; + + usb1_rst: reset@0 { + compatible = "socionext,uniphier-pxs3-usb3-reset"; + reg = <0x0 0x4>; + #reset-cells = <1>; + clock-names = "link"; + clocks = <&sys_clk 13>; + reset-names = "link"; + resets = <&sys_rst 13>; + }; + + usb1_vbus0: regulator@100 { + compatible = "socionext,uniphier-pxs3-usb3-regulator"; + reg = <0x100 0x10>; + clock-names = "link"; + clocks = <&sys_clk 13>; + reset-names = "link"; + resets = <&sys_rst 13>; + }; + + usb1_vbus1: regulator@110 { + compatible = "socionext,uniphier-pxs3-usb3-regulator"; + reg = <0x110 0x10>; + clock-names = "link"; + clocks = <&sys_clk 13>; + reset-names = "link"; + resets = <&sys_rst 13>; + }; + + usb1_hsphy0: hs-phy@200 { + compatible = "socionext,uniphier-pxs3-usb3-hsphy"; + reg = <0x200 0x10>; + #phy-cells = <0>; + clock-names = "link", "phy", "phy-ext"; + clocks = <&sys_clk 13>, <&sys_clk 20>, + <&sys_clk 14>; + reset-names = "link", "phy"; + resets = <&sys_rst 13>, <&sys_rst 20>; + vbus-supply = <&usb1_vbus0>; + nvmem-cell-names = "rterm", "sel_t", "hs_i"; + nvmem-cells = <&usb_rterm2>, <&usb_sel_t2>, + <&usb_hs_i2>; + }; + + usb1_hsphy1: hs-phy@210 { + compatible = "socionext,uniphier-pxs3-usb3-hsphy"; + reg = <0x210 0x10>; + #phy-cells = <0>; + clock-names = "link", "phy", "phy-ext"; + clocks = <&sys_clk 13>, <&sys_clk 20>, + <&sys_clk 14>; + reset-names = "link", "phy"; + resets = <&sys_rst 13>, <&sys_rst 20>; + vbus-supply = <&usb1_vbus1>; + nvmem-cell-names = "rterm", "sel_t", "hs_i"; + nvmem-cells = <&usb_rterm3>, <&usb_sel_t3>, + <&usb_hs_i2>; + }; + + usb1_ssphy0: ss-phy@300 { + compatible = "socionext,uniphier-pxs3-usb3-ssphy"; + reg = <0x300 0x10>; + #phy-cells = <0>; + clock-names = "link", "phy", "phy-ext"; + clocks = <&sys_clk 13>, <&sys_clk 21>, + <&sys_clk 14>; + reset-names = "link", "phy"; + resets = <&sys_rst 13>, <&sys_rst 21>; + vbus-supply = <&usb1_vbus0>; + }; + }; + nand: nand@68000000 { compatible = "socionext,uniphier-denali-nand-v5b"; status = "disabled"; @@ -455,7 +735,8 @@ interrupts = <0 65 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_nand>; - clocks = <&sys_clk 2>; + clock-names = "nand", "nand_x", "ecc"; + clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>; resets = <&sys_rst 2>; }; }; diff --git a/dts/src/arm64/synaptics/as370.dtsi b/dts/src/arm64/synaptics/as370.dtsi new file mode 100644 index 0000000000..7331acf387 --- /dev/null +++ b/dts/src/arm64/synaptics/as370.dtsi @@ -0,0 +1,173 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (C) 2018 Synaptics Incorporated + * + * Author: Jisheng Zhang <jszhang@kernel.org> + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + compatible = "syna,as370"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + compatible = "arm,cortex-a53", "arm,armv8"; + device_type = "cpu"; + reg = <0x0>; + enable-method = "psci"; + next-level-cache = <&l2>; + cpu-idle-states = <&CPU_SLEEP_0>; + }; + + cpu1: cpu@1 { + compatible = "arm,cortex-a53", "arm,armv8"; + device_type = "cpu"; + reg = <0x1>; + enable-method = "psci"; + next-level-cache = <&l2>; + cpu-idle-states = <&CPU_SLEEP_0>; + }; + + cpu2: cpu@2 { + compatible = "arm,cortex-a53", "arm,armv8"; + device_type = "cpu"; + reg = <0x2>; + enable-method = "psci"; + next-level-cache = <&l2>; + cpu-idle-states = <&CPU_SLEEP_0>; + }; + + cpu3: cpu@3 { + compatible = "arm,cortex-a53", "arm,armv8"; + device_type = "cpu"; + reg = <0x3>; + enable-method = "psci"; + next-level-cache = <&l2>; + cpu-idle-states = <&CPU_SLEEP_0>; + }; + + l2: cache { + compatible = "cache"; + }; + + idle-states { + entry-method = "psci"; + CPU_SLEEP_0: cpu-sleep-0 { + compatible = "arm,idle-state"; + local-timer-stop; + arm,psci-suspend-param = <0x0010000>; + entry-latency-us = <75>; + exit-latency-us = <155>; + min-residency-us = <1000>; + }; + }; + }; + + osc: osc { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + + pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, + <&cpu1>, + <&cpu2>, + <&cpu3>; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; + + soc@f7000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0xf7000000 0x1000000>; + + gic: interrupt-controller@901000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x901000 0x1000>, + <0x902000 0x2000>, + <0x904000 0x2000>, + <0x906000 0x2000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + apb@e80000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xe80000 0x10000>; + + uart0: serial@c00 { + compatible = "snps,dw-apb-uart"; + reg = <0xc00 0x100>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&osc>; + reg-shift = <2>; + status = "disabled"; + }; + + gpio0: gpio@1800 { + compatible = "snps,dw-apb-gpio"; + reg = <0x1800 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + porta: gpio-port@0 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <32>; + reg = <0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + gpio1: gpio@2000 { + compatible = "snps,dw-apb-gpio"; + reg = <0x2000 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + portb: gpio-port@1 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <32>; + reg = <0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + }; + }; +}; diff --git a/dts/src/arm64/ti/k3-am65-main.dtsi b/dts/src/arm64/ti/k3-am65-main.dtsi index 2409344df4..adcd6341e4 100644 --- a/dts/src/arm64/ti/k3-am65-main.dtsi +++ b/dts/src/arm64/ti/k3-am65-main.dtsi @@ -8,13 +8,13 @@ &cbass_main { gic500: interrupt-controller@1800000 { compatible = "arm,gic-v3"; - #address-cells = <1>; - #size-cells = <1>; + #address-cells = <2>; + #size-cells = <2>; ranges; #interrupt-cells = <3>; interrupt-controller; - reg = <0x01800000 0x10000>, /* GICD */ - <0x01880000 0x90000>; /* GICR */ + reg = <0x00 0x01800000 0x00 0x10000>, /* GICD */ + <0x00 0x01880000 0x00 0x90000>; /* GICR */ /* * vcpumntirq: * virtual CPU interface maintenance interrupt @@ -23,9 +23,50 @@ gic_its: gic-its@18200000 { compatible = "arm,gic-v3-its"; - reg = <0x01820000 0x10000>; + reg = <0x00 0x01820000 0x00 0x10000>; msi-controller; #msi-cells = <1>; }; }; + + secure_proxy_main: mailbox@32c00000 { + compatible = "ti,am654-secure-proxy"; + #mbox-cells = <1>; + reg-names = "target_data", "rt", "scfg"; + reg = <0x00 0x32c00000 0x00 0x100000>, + <0x00 0x32400000 0x00 0x100000>, + <0x00 0x32800000 0x00 0x100000>; + interrupt-names = "rx_011"; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + }; + + main_uart0: serial@2800000 { + compatible = "ti,am654-uart"; + reg = <0x00 0x02800000 0x00 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + current-speed = <115200>; + }; + + main_uart1: serial@2810000 { + compatible = "ti,am654-uart"; + reg = <0x00 0x02810000 0x00 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + current-speed = <115200>; + }; + + main_uart2: serial@2820000 { + compatible = "ti,am654-uart"; + reg = <0x00 0x02820000 0x00 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + current-speed = <115200>; + }; }; diff --git a/dts/src/arm64/ti/k3-am65-mcu.dtsi b/dts/src/arm64/ti/k3-am65-mcu.dtsi new file mode 100644 index 0000000000..8c611d16df --- /dev/null +++ b/dts/src/arm64/ti/k3-am65-mcu.dtsi @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for AM6 SoC Family MCU Domain peripherals + * + * Copyright (C) 2016-2018 Texas Instruments Incorporated - http://www.ti.com/ + */ + +&cbass_mcu { + mcu_uart0: serial@40a00000 { + compatible = "ti,am654-uart"; + reg = <0x00 0x40a00000 0x00 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 565 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <96000000>; + current-speed = <115200>; + }; +}; diff --git a/dts/src/arm64/ti/k3-am65-wakeup.dtsi b/dts/src/arm64/ti/k3-am65-wakeup.dtsi new file mode 100644 index 0000000000..affc3c3093 --- /dev/null +++ b/dts/src/arm64/ti/k3-am65-wakeup.dtsi @@ -0,0 +1,46 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for AM6 SoC Family Wakeup Domain peripherals + * + * Copyright (C) 2016-2018 Texas Instruments Incorporated - http://www.ti.com/ + */ + +&cbass_wakeup { + dmsc: dmsc { + compatible = "ti,k2g-sci"; + ti,host-id = <12>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + mbox-names = "rx", "tx"; + + mboxes= <&secure_proxy_main 11>, + <&secure_proxy_main 13>; + + k3_pds: power-controller { + compatible = "ti,sci-pm-domain"; + #power-domain-cells = <1>; + }; + + k3_clks: clocks { + compatible = "ti,k2g-sci-clk"; + #clock-cells = <2>; + }; + + k3_reset: reset-controller { + compatible = "ti,sci-reset"; + #reset-cells = <2>; + }; + }; + + wkup_uart0: serial@42300000 { + compatible = "ti,am654-uart"; + reg = <0x00 0x42300000 0x00 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 697 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + current-speed = <115200>; + }; +}; diff --git a/dts/src/arm64/ti/k3-am65.dtsi b/dts/src/arm64/ti/k3-am65.dtsi index cede1fa098..3d4bf369d0 100644 --- a/dts/src/arm64/ti/k3-am65.dtsi +++ b/dts/src/arm64/ti/k3-am65.dtsi @@ -16,6 +16,14 @@ #address-cells = <2>; #size-cells = <2>; + aliases { + serial0 = &wkup_uart0; + serial1 = &mcu_uart0; + serial2 = &main_uart0; + serial3 = &main_uart1; + serial4 = &main_uart2; + }; + chosen { }; firmware { @@ -46,38 +54,38 @@ cbass_main: interconnect@100000 { compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x00100000 0x00 0x00100000 0x00020000>, /* ctrl mmr */ - <0x00600000 0x00 0x00600000 0x00001100>, /* GPIO */ - <0x00900000 0x00 0x00900000 0x00012000>, /* serdes */ - <0x01000000 0x00 0x01000000 0x0af02400>, /* Most peripherals */ - <0x30800000 0x00 0x30800000 0x0bc00000>, /* MAIN NAVSS */ + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x00 0x00100000 0x00 0x00100000 0x00 0x00020000>, /* ctrl mmr */ + <0x00 0x00600000 0x00 0x00600000 0x00 0x00001100>, /* GPIO */ + <0x00 0x00900000 0x00 0x00900000 0x00 0x00012000>, /* serdes */ + <0x00 0x01000000 0x00 0x01000000 0x00 0x0af02400>, /* Most peripherals */ + <0x00 0x30800000 0x00 0x30800000 0x00 0x0bc00000>, /* MAIN NAVSS */ /* MCUSS Range */ - <0x28380000 0x00 0x28380000 0x03880000>, - <0x40200000 0x00 0x40200000 0x00900100>, - <0x42040000 0x00 0x42040000 0x03ac2400>, - <0x45100000 0x00 0x45100000 0x00c24000>, - <0x46000000 0x00 0x46000000 0x00200000>, - <0x47000000 0x00 0x47000000 0x00068400>; + <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>, + <0x00 0x40200000 0x00 0x40200000 0x00 0x00900100>, + <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>, + <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>, + <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, + <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>; cbass_mcu: interconnect@28380000 { compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x28380000 0x28380000 0x03880000>, /* MCU NAVSS*/ - <0x40200000 0x40200000 0x00900100>, /* First peripheral window */ - <0x42040000 0x42040000 0x03ac2400>, /* WKUP */ - <0x45100000 0x45100000 0x00c24000>, /* MMRs, remaining NAVSS */ - <0x46000000 0x46000000 0x00200000>, /* CPSW */ - <0x47000000 0x47000000 0x00068400>; /* OSPI space 1 */ + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>, /* MCU NAVSS*/ + <0x00 0x40200000 0x00 0x40200000 0x00 0x00900100>, /* First peripheral window */ + <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>, /* WKUP */ + <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>, /* MMRs, remaining NAVSS */ + <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, /* CPSW */ + <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>; /* OSPI space 1 */ cbass_wakeup: interconnect@42040000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; /* WKUP Basic peripherals */ - ranges = <0x42040000 0x42040000 0x03ac2400>; + ranges = <0x42040000 0x00 0x42040000 0x03ac2400>; }; }; }; @@ -85,3 +93,5 @@ /* Now include the peripherals for each bus segments */ #include "k3-am65-main.dtsi" +#include "k3-am65-mcu.dtsi" +#include "k3-am65-wakeup.dtsi" diff --git a/dts/src/arm64/ti/k3-am654-base-board.dts b/dts/src/arm64/ti/k3-am654-base-board.dts index af6956fdc1..e146ac2ad7 100644 --- a/dts/src/arm64/ti/k3-am654-base-board.dts +++ b/dts/src/arm64/ti/k3-am654-base-board.dts @@ -34,3 +34,8 @@ }; }; }; + +&wkup_uart0 { + /* Wakeup UART is used by System firmware */ + status = "disabled"; +}; diff --git a/dts/src/mips/ingenic/jz4740.dtsi b/dts/src/mips/ingenic/jz4740.dtsi index 26c6b561d6..6fb16fd240 100644 --- a/dts/src/mips/ingenic/jz4740.dtsi +++ b/dts/src/mips/ingenic/jz4740.dtsi @@ -154,6 +154,21 @@ clock-names = "baud", "module"; }; + dmac: dma-controller@13020000 { + compatible = "ingenic,jz4740-dma"; + reg = <0x13020000 0xbc + 0x13020300 0x14>; + #dma-cells = <2>; + + interrupt-parent = <&intc>; + interrupts = <29>; + + clocks = <&cgu JZ4740_CLK_DMA>; + + /* Disable dmac until we have something that uses it */ + status = "disabled"; + }; + uhc: uhc@13030000 { compatible = "ingenic,jz4740-ohci", "generic-ohci"; reg = <0x13030000 0x1000>; diff --git a/dts/src/mips/ingenic/jz4770.dtsi b/dts/src/mips/ingenic/jz4770.dtsi index 7c2804f3f5..49ede6c14f 100644 --- a/dts/src/mips/ingenic/jz4770.dtsi +++ b/dts/src/mips/ingenic/jz4770.dtsi @@ -196,6 +196,36 @@ status = "disabled"; }; + dmac0: dma-controller@13420000 { + compatible = "ingenic,jz4770-dma"; + reg = <0x13420000 0xC0 + 0x13420300 0x20>; + + #dma-cells = <1>; + + clocks = <&cgu JZ4770_CLK_DMA>; + interrupt-parent = <&intc>; + interrupts = <24>; + + /* Disable dmac0 until we have something that uses it */ + status = "disabled"; + }; + + dmac1: dma-controller@13420100 { + compatible = "ingenic,jz4770-dma"; + reg = <0x13420100 0xC0 + 0x13420400 0x20>; + + #dma-cells = <1>; + + clocks = <&cgu JZ4770_CLK_DMA>; + interrupt-parent = <&intc>; + interrupts = <23>; + + /* Disable dmac1 until we have something that uses it */ + status = "disabled"; + }; + uhc: uhc@13430000 { compatible = "generic-ohci"; reg = <0x13430000 0x1000>; diff --git a/dts/src/mips/ingenic/jz4780.dtsi b/dts/src/mips/ingenic/jz4780.dtsi index ce93d57f1b..b03cdec56d 100644 --- a/dts/src/mips/ingenic/jz4780.dtsi +++ b/dts/src/mips/ingenic/jz4780.dtsi @@ -266,7 +266,8 @@ dma: dma@13420000 { compatible = "ingenic,jz4780-dma"; - reg = <0x13420000 0x10000>; + reg = <0x13420000 0x400 + 0x13421000 0x40>; #dma-cells = <2>; interrupt-parent = <&intc>; diff --git a/dts/src/mips/lantiq/danube.dtsi b/dts/src/mips/lantiq/danube.dtsi index 2dd950181f..510be63c8b 100644 --- a/dts/src/mips/lantiq/danube.dtsi +++ b/dts/src/mips/lantiq/danube.dtsi @@ -10,12 +10,12 @@ }; }; - biu@1F800000 { + biu@1f800000 { #address-cells = <1>; #size-cells = <1>; compatible = "lantiq,biu", "simple-bus"; - reg = <0x1F800000 0x800000>; - ranges = <0x0 0x1F800000 0x7FFFFF>; + reg = <0x1f800000 0x800000>; + ranges = <0x0 0x1f800000 0x7fffff>; icu0: icu@80200 { #interrupt-cells = <1>; @@ -24,18 +24,18 @@ reg = <0x80200 0x120>; }; - watchdog@803F0 { + watchdog@803f0 { compatible = "lantiq,wdt"; - reg = <0x803F0 0x10>; + reg = <0x803f0 0x10>; }; }; - sram@1F000000 { + sram@1f000000 { #address-cells = <1>; #size-cells = <1>; compatible = "lantiq,sram"; - reg = <0x1F000000 0x800000>; - ranges = <0x0 0x1F000000 0x7FFFFF>; + reg = <0x1f000000 0x800000>; + ranges = <0x0 0x1f000000 0x7fffff>; eiu0: eiu@101000 { #interrupt-cells = <1>; @@ -66,41 +66,41 @@ #address-cells = <1>; #size-cells = <1>; compatible = "lantiq,fpi", "simple-bus"; - ranges = <0x0 0x10000000 0xEEFFFFF>; - reg = <0x10000000 0xEF00000>; + ranges = <0x0 0x10000000 0xeefffff>; + reg = <0x10000000 0xef00000>; - gptu@E100A00 { + gptu@e100a00 { compatible = "lantiq,gptu-xway"; - reg = <0xE100A00 0x100>; + reg = <0xe100a00 0x100>; }; - serial@E100C00 { + serial@e100c00 { compatible = "lantiq,asc"; - reg = <0xE100C00 0x400>; + reg = <0xe100c00 0x400>; interrupt-parent = <&icu0>; interrupts = <112 113 114>; }; - dma0: dma@E104100 { + dma0: dma@e104100 { compatible = "lantiq,dma-xway"; - reg = <0xE104100 0x800>; + reg = <0xe104100 0x800>; }; - ebu0: ebu@E105300 { + ebu0: ebu@e105300 { compatible = "lantiq,ebu-xway"; - reg = <0xE105300 0x100>; + reg = <0xe105300 0x100>; }; - pci0: pci@E105400 { + pci0: pci@e105400 { #address-cells = <3>; #size-cells = <2>; #interrupt-cells = <1>; compatible = "lantiq,pci-xway"; bus-range = <0x0 0x0>; ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000 /* pci memory */ - 0x1000000 0 0x00000000 0xAE00000 0 0x200000>; /* io space */ + 0x1000000 0 0x00000000 0xae00000 0 0x200000>; /* io space */ reg = <0x7000000 0x8000 /* config space */ - 0xE105400 0x400>; /* pci bridge */ + 0xe105400 0x400>; /* pci bridge */ }; }; }; diff --git a/dts/src/mips/lantiq/easy50712.dts b/dts/src/mips/lantiq/easy50712.dts index c37a33962f..1ce20b7d05 100644 --- a/dts/src/mips/lantiq/easy50712.dts +++ b/dts/src/mips/lantiq/easy50712.dts @@ -52,14 +52,14 @@ }; }; - gpio: pinmux@E100B10 { + gpio: pinmux@e100b10 { compatible = "lantiq,danube-pinctrl"; pinctrl-names = "default"; pinctrl-0 = <&state_default>; #gpio-cells = <2>; gpio-controller; - reg = <0xE100B10 0xA0>; + reg = <0xe100b10 0xa0>; state_default: pinmux { stp { @@ -82,26 +82,26 @@ }; }; - etop@E180000 { + etop@e180000 { compatible = "lantiq,etop-xway"; - reg = <0xE180000 0x40000>; + reg = <0xe180000 0x40000>; interrupt-parent = <&icu0>; interrupts = <73 78>; phy-mode = "rmii"; mac-address = [ 00 11 22 33 44 55 ]; }; - stp0: stp@E100BB0 { + stp0: stp@e100bb0 { #gpio-cells = <2>; compatible = "lantiq,gpio-stp-xway"; gpio-controller; - reg = <0xE100BB0 0x40>; + reg = <0xe100bb0 0x40>; lantiq,shadow = <0xfff>; lantiq,groups = <0x3>; }; - pci@E105400 { + pci@e105400 { lantiq,bus-clock = <33333333>; interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < diff --git a/dts/src/mips/mscc/ocelot.dtsi b/dts/src/mips/mscc/ocelot.dtsi index f7eb612b46..90c60d42f5 100644 --- a/dts/src/mips/mscc/ocelot.dtsi +++ b/dts/src/mips/mscc/ocelot.dtsi @@ -78,6 +78,19 @@ status = "disabled"; }; + i2c: i2c@100400 { + compatible = "mscc,ocelot-i2c", "snps,designware-i2c"; + pinctrl-0 = <&i2c_pins>; + pinctrl-names = "default"; + reg = <0x100400 0x100>, <0x198 0x8>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <8>; + clocks = <&ahb_clk>; + + status = "disabled"; + }; + uart2: serial@100800 { pinctrl-0 = <&uart2_pins>; pinctrl-names = "default"; @@ -107,7 +120,6 @@ reg = <0x1010000 0x10000>, <0x1030000 0x10000>, <0x1080000 0x100>, - <0x10d0000 0x10000>, <0x11e0000 0x100>, <0x11f0000 0x100>, <0x1200000 0x100>, @@ -121,10 +133,10 @@ <0x1280000 0x100>, <0x1800000 0x80000>, <0x1880000 0x10000>; - reg-names = "sys", "rew", "qs", "hsio", "port0", - "port1", "port2", "port3", "port4", "port5", - "port6", "port7", "port8", "port9", "port10", - "qsys", "ana"; + reg-names = "sys", "rew", "qs", "port0", "port1", + "port2", "port3", "port4", "port5", "port6", + "port7", "port8", "port9", "port10", "qsys", + "ana"; interrupts = <21 22>; interrupt-names = "xtr", "inj"; @@ -183,6 +195,11 @@ interrupts = <13>; #interrupt-cells = <2>; + i2c_pins: i2c-pins { + pins = "GPIO_16", "GPIO_17"; + function = "twi"; + }; + uart_pins: uart-pins { pins = "GPIO_6", "GPIO_7"; function = "uart"; @@ -197,6 +214,7 @@ pins = "GPIO_14", "GPIO_15"; function = "miim1"; }; + }; mdio0: mdio@107009c { @@ -231,5 +249,15 @@ pinctrl-0 = <&miim1>; status = "disabled"; }; + + hsio: syscon@10d0000 { + compatible = "mscc,ocelot-hsio", "syscon", "simple-mfd"; + reg = <0x10d0000 0x10000>; + + serdes: serdes { + compatible = "mscc,vsc7514-serdes"; + #phy-cells = <2>; + }; + }; }; }; diff --git a/dts/src/mips/mscc/ocelot_pcb120.dts b/dts/src/mips/mscc/ocelot_pcb120.dts new file mode 100644 index 0000000000..33991fd209 --- /dev/null +++ b/dts/src/mips/mscc/ocelot_pcb120.dts @@ -0,0 +1,107 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* Copyright (c) 2017 Microsemi Corporation */ + +/dts-v1/; + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/phy/phy-ocelot-serdes.h> +#include "ocelot.dtsi" + +/ { + compatible = "mscc,ocelot-pcb120", "mscc,ocelot"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0e000000>; + }; +}; + +&gpio { + phy_int_pins: phy_int_pins { + pins = "GPIO_4"; + function = "gpio"; + }; +}; + +&mdio0 { + status = "okay"; +}; + +&mdio1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&miim1>, <&phy_int_pins>; + + phy7: ethernet-phy@0 { + reg = <0>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gpio>; + }; + phy6: ethernet-phy@1 { + reg = <1>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gpio>; + }; + phy5: ethernet-phy@2 { + reg = <2>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gpio>; + }; + phy4: ethernet-phy@3 { + reg = <3>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gpio>; + }; +}; + +&port0 { + phy-handle = <&phy0>; +}; + +&port1 { + phy-handle = <&phy1>; +}; + +&port2 { + phy-handle = <&phy2>; +}; + +&port3 { + phy-handle = <&phy3>; +}; + +&port4 { + phy-handle = <&phy7>; + phy-mode = "sgmii"; + phys = <&serdes 4 SERDES1G(2)>; +}; + +&port5 { + phy-handle = <&phy4>; + phy-mode = "sgmii"; + phys = <&serdes 5 SERDES1G(5)>; +}; + +&port6 { + phy-handle = <&phy6>; + phy-mode = "sgmii"; + phys = <&serdes 6 SERDES1G(3)>; +}; + +&port9 { + phy-handle = <&phy5>; + phy-mode = "sgmii"; + phys = <&serdes 9 SERDES1G(4)>; +}; + +&uart0 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; diff --git a/dts/src/mips/mscc/ocelot_pcb123.dts b/dts/src/mips/mscc/ocelot_pcb123.dts index 2266027759..ef852f382d 100644 --- a/dts/src/mips/mscc/ocelot_pcb123.dts +++ b/dts/src/mips/mscc/ocelot_pcb123.dts @@ -36,6 +36,12 @@ }; }; +&i2c { + clock-frequency = <100000>; + i2c-sda-hold-time-ns = <300>; + status = "okay"; +}; + &mdio0 { status = "okay"; }; diff --git a/dts/src/powerpc/fsl/t2080rdb.dts b/dts/src/powerpc/fsl/t2080rdb.dts index 55c0210a77..092a400740 100644 --- a/dts/src/powerpc/fsl/t2080rdb.dts +++ b/dts/src/powerpc/fsl/t2080rdb.dts @@ -77,12 +77,12 @@ }; ethernet@f0000 { - phy-handle = <&xg_cs4315_phy1>; + phy-handle = <&xg_cs4315_phy2>; phy-connection-type = "xgmii"; }; ethernet@f2000 { - phy-handle = <&xg_cs4315_phy2>; + phy-handle = <&xg_cs4315_phy1>; phy-connection-type = "xgmii"; }; diff --git a/dts/src/powerpc/mpc885ads.dts b/dts/src/powerpc/mpc885ads.dts index 5b037f5174..3aa300afbb 100644 --- a/dts/src/powerpc/mpc885ads.dts +++ b/dts/src/powerpc/mpc885ads.dts @@ -72,7 +72,7 @@ #address-cells = <1>; #size-cells = <1>; device_type = "soc"; - ranges = <0x0 0xff000000 0x4000>; + ranges = <0x0 0xff000000 0x28000>; bus-frequency = <0>; // Temporary -- will go away once kernel uses ranges for get_immrbase(). @@ -224,6 +224,17 @@ #size-cells = <0>; }; }; + + crypto@20000 { + compatible = "fsl,sec1.2", "fsl,sec1.0"; + reg = <0x20000 0x8000>; + interrupts = <1 1>; + interrupt-parent = <&PIC>; + fsl,num-channels = <1>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0x4c>; + fsl,descriptor-types-mask = <0x05000154>; + }; }; chosen { |