dts: update to v5.17-rc4

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

26 files changed, 133 insertions, 145 deletions

diff --git a/dts/src/arm/am335x-wega.dtsi b/dts/src/arm/am335x-wega.dtsi
index 673159d93a..f957fea820 100644
--- a/dts/src/arm/am335x-wega.dtsi
+++ b/dts/src/arm/am335x-wega.dtsi
@@ -55,7 +55,7 @@
 		2 1 0 0 /* # 0: INACTIVE, 1: TX, 2: RX */
 	>;
 	tx-num-evt = <16>;
-	rt-num-evt = <16>;
+	rx-num-evt = <16>;
 	status = "okay";
 };
 
diff --git a/dts/src/arm/dra7.dtsi b/dts/src/arm/dra7.dtsi
index 6b485cbed8..42bff11765 100644
--- a/dts/src/arm/dra7.dtsi
+++ b/dts/src/arm/dra7.dtsi
@@ -160,7 +160,7 @@
 		target-module@48210000 {
 			compatible = "ti,sysc-omap4-simple", "ti,sysc";
 			power-domains = <&prm_mpu>;
-			clocks = <&mpu_clkctrl DRA7_MPU_CLKCTRL 0>;
+			clocks = <&mpu_clkctrl DRA7_MPU_MPU_CLKCTRL 0>;
 			clock-names = "fck";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -875,10 +875,10 @@
 			      <0x58000014 4>;
 			reg-names = "rev", "syss";
 			ti,syss-mask = <1>;
-			clocks = <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 0>,
-				 <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 9>,
-				 <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 10>,
-				 <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 11>;
+			clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 0>,
+				 <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 9>,
+				 <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 10>,
+				 <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 11>;
 			clock-names = "fck", "hdmi_clk", "sys_clk", "tv_clk";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -912,7 +912,7 @@
 							 SYSC_OMAP2_SOFTRESET |
 							 SYSC_OMAP2_AUTOIDLE)>;
 					ti,syss-mask = <1>;
-					clocks = <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 8>;
+					clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 8>;
 					clock-names = "fck";
 					#address-cells = <1>;
 					#size-cells = <1>;
@@ -939,8 +939,8 @@
 							<SYSC_IDLE_SMART>,
 							<SYSC_IDLE_SMART_WKUP>;
 					ti,sysc-mask = <(SYSC_OMAP4_SOFTRESET)>;
-					clocks = <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 9>,
-						 <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 8>;
+					clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 9>,
+						 <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 8>;
 					clock-names = "fck", "dss_clk";
 					#address-cells = <1>;
 					#size-cells = <1>;
@@ -979,7 +979,7 @@
 				compatible = "vivante,gc";
 				reg = <0x0 0x700>;
 				interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&dss_clkctrl DRA7_BB2D_CLKCTRL 0>;
+				clocks = <&dss_clkctrl DRA7_DSS_BB2D_CLKCTRL 0>;
 				clock-names = "core";
 			};
 		};
@@ -1333,7 +1333,7 @@
 	ti,no-reset-on-init;
 	ti,no-idle;
 	timer@0 {
-		assigned-clocks = <&wkupaon_clkctrl DRA7_TIMER1_CLKCTRL 24>;
+		assigned-clocks = <&wkupaon_clkctrl DRA7_WKUPAON_TIMER1_CLKCTRL 24>;
 		assigned-clock-parents = <&sys_32k_ck>;
 	};
 };
diff --git a/dts/src/arm/imx23-evk.dts b/dts/src/arm/imx23-evk.dts
index 8cbaf1c811..3b609d987d 100644
--- a/dts/src/arm/imx23-evk.dts
+++ b/dts/src/arm/imx23-evk.dts
@@ -79,7 +79,6 @@
 						MX23_PAD_LCD_RESET__GPIO_1_18
 						MX23_PAD_PWM3__GPIO_1_29
 						MX23_PAD_PWM4__GPIO_1_30
-						MX23_PAD_SSP1_DETECT__SSP1_DETECT
 					>;
 					fsl,drive-strength = <MXS_DRIVE_4mA>;
 					fsl,voltage = <MXS_VOLTAGE_HIGH>;
diff --git a/dts/src/arm/imx6qdl-udoo.dtsi b/dts/src/arm/imx6qdl-udoo.dtsi
index d07d8f8345..ccfa8e320b 100644
--- a/dts/src/arm/imx6qdl-udoo.dtsi
+++ b/dts/src/arm/imx6qdl-udoo.dtsi
@@ -5,6 +5,8 @@
  * Author: Fabio Estevam <fabio.estevam@freescale.com>
  */
 
+#include <dt-bindings/gpio/gpio.h>
+
 / {
 	aliases {
 		backlight = &backlight;
@@ -226,6 +228,7 @@
 				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
 				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
 				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x1b0b0
 			>;
 		};
 
@@ -304,7 +307,7 @@
 &usdhc3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc3>;
-	non-removable;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
diff --git a/dts/src/arm/imx7ulp.dtsi b/dts/src/arm/imx7ulp.dtsi
index b7ea37ad4e..bcec98b964 100644
--- a/dts/src/arm/imx7ulp.dtsi
+++ b/dts/src/arm/imx7ulp.dtsi
@@ -259,7 +259,7 @@
 			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&pcc2 IMX7ULP_CLK_WDG1>;
 			assigned-clocks = <&pcc2 IMX7ULP_CLK_WDG1>;
-			assigned-clocks-parents = <&scg1 IMX7ULP_CLK_FIRC_BUS_CLK>;
+			assigned-clock-parents = <&scg1 IMX7ULP_CLK_FIRC_BUS_CLK>;
 			timeout-sec = <40>;
 		};
 
diff --git a/dts/src/arm/meson.dtsi b/dts/src/arm/meson.dtsi
index 3be7cba603..26eaba3fa9 100644
--- a/dts/src/arm/meson.dtsi
+++ b/dts/src/arm/meson.dtsi
@@ -59,7 +59,7 @@
 			};
 
 			uart_A: serial@84c0 {
-				compatible = "amlogic,meson6-uart", "amlogic,meson-uart";
+				compatible = "amlogic,meson6-uart";
 				reg = <0x84c0 0x18>;
 				interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
 				fifo-size = <128>;
@@ -67,7 +67,7 @@
 			};
 
 			uart_B: serial@84dc {
-				compatible = "amlogic,meson6-uart", "amlogic,meson-uart";
+				compatible = "amlogic,meson6-uart";
 				reg = <0x84dc 0x18>;
 				interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
 				status = "disabled";
@@ -105,7 +105,7 @@
 			};
 
 			uart_C: serial@8700 {
-				compatible = "amlogic,meson6-uart", "amlogic,meson-uart";
+				compatible = "amlogic,meson6-uart";
 				reg = <0x8700 0x18>;
 				interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>;
 				status = "disabled";
@@ -228,7 +228,7 @@
 			};
 
 			uart_AO: serial@4c0 {
-				compatible = "amlogic,meson6-uart", "amlogic,meson-ao-uart", "amlogic,meson-uart";
+				compatible = "amlogic,meson6-uart", "amlogic,meson-ao-uart";
 				reg = <0x4c0 0x18>;
 				interrupts = <GIC_SPI 90 IRQ_TYPE_EDGE_RISING>;
 				status = "disabled";
diff --git a/dts/src/arm/meson8.dtsi b/dts/src/arm/meson8.dtsi
index f80ddc98d3..9997a5d033 100644
--- a/dts/src/arm/meson8.dtsi
+++ b/dts/src/arm/meson8.dtsi
@@ -736,27 +736,27 @@
 };
 
 &uart_AO {
-	compatible = "amlogic,meson8-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_CLK81>;
-	clock-names = "baud", "xtal", "pclk";
+	compatible = "amlogic,meson8-uart", "amlogic,meson-ao-uart";
+	clocks = <&xtal>, <&clkc CLKID_CLK81>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
 };
 
 &uart_A {
-	compatible = "amlogic,meson8-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_UART0>;
-	clock-names = "baud", "xtal", "pclk";
+	compatible = "amlogic,meson8-uart";
+	clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
 };
 
 &uart_B {
-	compatible = "amlogic,meson8-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_UART1>;
-	clock-names = "baud", "xtal", "pclk";
+	compatible = "amlogic,meson8-uart";
+	clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
 };
 
 &uart_C {
-	compatible = "amlogic,meson8-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_UART2>;
-	clock-names = "baud", "xtal", "pclk";
+	compatible = "amlogic,meson8-uart";
+	clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
 };
 
 &usb0 {
diff --git a/dts/src/arm/meson8b.dtsi b/dts/src/arm/meson8b.dtsi
index b49b7cbaed..94f1c03dec 100644
--- a/dts/src/arm/meson8b.dtsi
+++ b/dts/src/arm/meson8b.dtsi
@@ -724,27 +724,27 @@
 };
 
 &uart_AO {
-	compatible = "amlogic,meson8b-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_CLK81>;
-	clock-names = "baud", "xtal", "pclk";
+	compatible = "amlogic,meson8b-uart", "amlogic,meson-ao-uart";
+	clocks = <&xtal>, <&clkc CLKID_CLK81>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
 };
 
 &uart_A {
-	compatible = "amlogic,meson8b-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_UART0>;
-	clock-names = "baud", "xtal", "pclk";
+	compatible = "amlogic,meson8b-uart";
+	clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
 };
 
 &uart_B {
-	compatible = "amlogic,meson8b-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_UART1>;
-	clock-names = "baud", "xtal", "pclk";
+	compatible = "amlogic,meson8b-uart";
+	clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
 };
 
 &uart_C {
-	compatible = "amlogic,meson8b-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_UART2>;
-	clock-names = "baud", "xtal", "pclk";
+	compatible = "amlogic,meson8b-uart";
+	clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
 };
 
 &usb0 {
diff --git a/dts/src/arm/omap3-beagle-ab4.dts b/dts/src/arm/omap3-beagle-ab4.dts
new file mode 100644
index 0000000000..990ff2d846
--- /dev/null
+++ b/dts/src/arm/omap3-beagle-ab4.dts
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+
+#include "omap3-beagle.dts"
+
+/ {
+	model = "TI OMAP3 BeagleBoard A to B4";
+	compatible = "ti,omap3-beagle-ab4", "ti,omap3-beagle", "ti,omap3430", "ti,omap3";
+};
+
+/*
+ * Workaround for capacitor C70 issue, see "Boards revision A and < B5"
+ * section at https://elinux.org/BeagleBoard_Community
+ */
+
+/* Unusable as clocksource because of unreliable oscillator */
+&counter32k {
+	status = "disabled";
+};
+
+/* Unusable as clockevent because of unreliable oscillator, allow to idle */
+&timer1_target {
+	/delete-property/ti,no-reset-on-init;
+	/delete-property/ti,no-idle;
+	timer@0 {
+		/delete-property/ti,timer-alwon;
+	};
+};
+
+/* Preferred always-on timer for clocksource */
+&timer12_target {
+	ti,no-reset-on-init;
+	ti,no-idle;
+	timer@0 {
+		/* Always clocked by secure_32k_fck */
+	};
+};
+
+/* Preferred timer for clockevent */
+&timer2_target {
+	ti,no-reset-on-init;
+	ti,no-idle;
+	timer@0 {
+		assigned-clocks = <&gpt2_fck>;
+		assigned-clock-parents = <&sys_ck>;
+	};
+};
diff --git a/dts/src/arm/omap3-beagle.dts b/dts/src/arm/omap3-beagle.dts
index f9f34b8458..0548b39133 100644
--- a/dts/src/arm/omap3-beagle.dts
+++ b/dts/src/arm/omap3-beagle.dts
@@ -304,39 +304,6 @@
 	phys = <0 &hsusb2_phy>;
 };
 
-/* Unusable as clocksource because of unreliable oscillator */
-&counter32k {
-	status = "disabled";
-};
-
-/* Unusable as clockevent because if unreliable oscillator, allow to idle */
-&timer1_target {
-	/delete-property/ti,no-reset-on-init;
-	/delete-property/ti,no-idle;
-	timer@0 {
-		/delete-property/ti,timer-alwon;
-	};
-};
-
-/* Preferred always-on timer for clocksource */
-&timer12_target {
-	ti,no-reset-on-init;
-	ti,no-idle;
-	timer@0 {
-		/* Always clocked by secure_32k_fck */
-	};
-};
-
-/* Preferred timer for clockevent */
-&timer2_target {
-	ti,no-reset-on-init;
-	ti,no-idle;
-	timer@0 {
-		assigned-clocks = <&gpt2_fck>;
-		assigned-clock-parents = <&sys_ck>;
-	};
-};
-
 &twl_gpio {
 	ti,use-leds;
 	/* pullups: BIT(1) */
diff --git a/dts/src/arm/spear320-hmi.dts b/dts/src/arm/spear320-hmi.dts
index 367ba48aac..b587e4ec11 100644
--- a/dts/src/arm/spear320-hmi.dts
+++ b/dts/src/arm/spear320-hmi.dts
@@ -235,7 +235,6 @@
 					#address-cells = <1>;
 					#size-cells = <0>;
 					reg = <0x41>;
-					irq-over-gpio;
 					irq-gpios = <&gpiopinctrl 29 0x4>;
 					id = <0>;
 					blocks = <0x5>;
diff --git a/dts/src/arm/ste-ux500-samsung-skomer.dts b/dts/src/arm/ste-ux500-samsung-skomer.dts
index 580ca497f3..f8c5899fbd 100644
--- a/dts/src/arm/ste-ux500-samsung-skomer.dts
+++ b/dts/src/arm/ste-ux500-samsung-skomer.dts
@@ -185,10 +185,6 @@
 			cap-sd-highspeed;
 			cap-mmc-highspeed;
 			/* All direction control is used */
-			st,sig-dir-cmd;
-			st,sig-dir-dat0;
-			st,sig-dir-dat2;
-			st,sig-dir-dat31;
 			st,sig-pin-fbclk;
 			full-pwr-cycle;
 			vmmc-supply = <&ab8500_ldo_aux3_reg>;
diff --git a/dts/src/arm64/amlogic/meson-g12-common.dtsi b/dts/src/arm64/amlogic/meson-g12-common.dtsi
index 517519e6e8..f84d4b489e 100644
--- a/dts/src/arm64/amlogic/meson-g12-common.dtsi
+++ b/dts/src/arm64/amlogic/meson-g12-common.dtsi
@@ -107,6 +107,12 @@
 			no-map;
 		};
 
+		/* 32 MiB reserved for ARM Trusted Firmware (BL32) */
+		secmon_reserved_bl32: secmon@5300000 {
+			reg = <0x0 0x05300000 0x0 0x2000000>;
+			no-map;
+		};
+
 		linux,cma {
 			compatible = "shared-dma-pool";
 			reusable;
diff --git a/dts/src/arm64/amlogic/meson-g12a-sei510.dts b/dts/src/arm64/amlogic/meson-g12a-sei510.dts
index d8838dde0f..4fb31c2ba3 100644
--- a/dts/src/arm64/amlogic/meson-g12a-sei510.dts
+++ b/dts/src/arm64/amlogic/meson-g12a-sei510.dts
@@ -157,14 +157,6 @@
 		regulator-always-on;
 	};
 
-	reserved-memory {
-		/* TEE Reserved Memory */
-		bl32_reserved: bl32@5000000 {
-			reg = <0x0 0x05300000 0x0 0x2000000>;
-			no-map;
-		};
-	};
-
 	sdio_pwrseq: sdio-pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
diff --git a/dts/src/arm64/amlogic/meson-g12b-odroid-n2.dtsi b/dts/src/arm64/amlogic/meson-g12b-odroid-n2.dtsi
index 3e968b2441..fd3fa82e4c 100644
--- a/dts/src/arm64/amlogic/meson-g12b-odroid-n2.dtsi
+++ b/dts/src/arm64/amlogic/meson-g12b-odroid-n2.dtsi
@@ -17,7 +17,7 @@
 		rtc1 = &vrtc;
 	};
 
-	dioo2133: audio-amplifier-0 {
+	dio2133: audio-amplifier-0 {
 		compatible = "simple-audio-amplifier";
 		enable-gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>;
 		VCC-supply = <&vcc_5v>;
@@ -219,7 +219,7 @@
 		audio-widgets = "Line", "Lineout";
 		audio-aux-devs = <&tdmout_b>, <&tdmout_c>, <&tdmin_a>,
 				 <&tdmin_b>, <&tdmin_c>, <&tdmin_lb>,
-				 <&dioo2133>;
+				 <&dio2133>;
 		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
 				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
 				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
diff --git a/dts/src/arm64/amlogic/meson-gx.dtsi b/dts/src/arm64/amlogic/meson-gx.dtsi
index 6b457b2c30..aa14ea017a 100644
--- a/dts/src/arm64/amlogic/meson-gx.dtsi
+++ b/dts/src/arm64/amlogic/meson-gx.dtsi
@@ -49,6 +49,12 @@
 			no-map;
 		};
 
+		/* 32 MiB reserved for ARM Trusted Firmware (BL32) */
+		secmon_reserved_bl32: secmon@5300000 {
+			reg = <0x0 0x05300000 0x0 0x2000000>;
+			no-map;
+		};
+
 		linux,cma {
 			compatible = "shared-dma-pool";
 			reusable;
diff --git a/dts/src/arm64/amlogic/meson-sm1-bananapi-m5.dts b/dts/src/arm64/amlogic/meson-sm1-bananapi-m5.dts
index 212c6aa5a3..5751c48620 100644
--- a/dts/src/arm64/amlogic/meson-sm1-bananapi-m5.dts
+++ b/dts/src/arm64/amlogic/meson-sm1-bananapi-m5.dts
@@ -123,7 +123,7 @@
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <3300000>;
 
-		enable-gpio = <&gpio GPIOE_2 GPIO_ACTIVE_HIGH>;
+		enable-gpio = <&gpio_ao GPIOE_2 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 		regulator-always-on;
 
diff --git a/dts/src/arm64/amlogic/meson-sm1-odroid.dtsi b/dts/src/arm64/amlogic/meson-sm1-odroid.dtsi
index 0bd1e98a0e..ddb1b34539 100644
--- a/dts/src/arm64/amlogic/meson-sm1-odroid.dtsi
+++ b/dts/src/arm64/amlogic/meson-sm1-odroid.dtsi
@@ -48,7 +48,7 @@
 		regulator-max-microvolt = <3300000>;
 		vin-supply = <&vcc_5v>;
 
-		enable-gpio = <&gpio GPIOE_2 GPIO_ACTIVE_HIGH>;
+		enable-gpio = <&gpio_ao GPIOE_2 GPIO_OPEN_DRAIN>;
 		enable-active-high;
 		regulator-always-on;
 
diff --git a/dts/src/arm64/amlogic/meson-sm1-sei610.dts b/dts/src/arm64/amlogic/meson-sm1-sei610.dts
index 427475846f..a5d79f2f7c 100644
--- a/dts/src/arm64/amlogic/meson-sm1-sei610.dts
+++ b/dts/src/arm64/amlogic/meson-sm1-sei610.dts
@@ -203,14 +203,6 @@
 		regulator-always-on;
 	};
 
-	reserved-memory {
-		/* TEE Reserved Memory */
-		bl32_reserved: bl32@5000000 {
-			reg = <0x0 0x05300000 0x0 0x2000000>;
-			no-map;
-		};
-	};
-
 	sdio_pwrseq: sdio-pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
diff --git a/dts/src/arm64/freescale/fsl-ls1028a-kontron-sl28.dts b/dts/src/arm64/freescale/fsl-ls1028a-kontron-sl28.dts
index d74e738e40..c03f4e1833 100644
--- a/dts/src/arm64/freescale/fsl-ls1028a-kontron-sl28.dts
+++ b/dts/src/arm64/freescale/fsl-ls1028a-kontron-sl28.dts
@@ -157,6 +157,10 @@
 	};
 };
 
+&ftm_alarm0 {
+	status = "okay";
+};
+
 &gpio1 {
 	gpio-line-names =
 		"", "", "", "", "", "", "", "",
diff --git a/dts/src/arm64/freescale/imx8mq-librem5.dtsi b/dts/src/arm64/freescale/imx8mq-librem5.dtsi
index f3e3418f7e..2d4a472af6 100644
--- a/dts/src/arm64/freescale/imx8mq-librem5.dtsi
+++ b/dts/src/arm64/freescale/imx8mq-librem5.dtsi
@@ -1115,8 +1115,8 @@
 	status = "okay";
 
 	ports {
-		port@1 {
-			reg = <1>;
+		port@0 {
+			reg = <0>;
 
 			mipi1_sensor_ep: endpoint {
 				remote-endpoint = <&camera1_ep>;
diff --git a/dts/src/arm64/freescale/imx8mq.dtsi b/dts/src/arm64/freescale/imx8mq.dtsi
index 2df2510d01..e92ebb6147 100644
--- a/dts/src/arm64/freescale/imx8mq.dtsi
+++ b/dts/src/arm64/freescale/imx8mq.dtsi
@@ -554,7 +554,7 @@
 				assigned-clock-rates = <0>, <0>, <0>, <594000000>;
 				status = "disabled";
 
-				port@0 {
+				port {
 					lcdif_mipi_dsi: endpoint {
 						remote-endpoint = <&mipi_dsi_lcdif_in>;
 					};
@@ -1151,8 +1151,8 @@
 					#address-cells = <1>;
 					#size-cells = <0>;
 
-					port@0 {
-						reg = <0>;
+					port@1 {
+						reg = <1>;
 
 						csi1_mipi_ep: endpoint {
 							remote-endpoint = <&csi1_ep>;
@@ -1203,8 +1203,8 @@
 					#address-cells = <1>;
 					#size-cells = <0>;
 
-					port@0 {
-						reg = <0>;
+					port@1 {
+						reg = <1>;
 
 						csi2_mipi_ep: endpoint {
 							remote-endpoint = <&csi2_ep>;
diff --git a/dts/src/arm64/freescale/mba8mx.dtsi b/dts/src/arm64/freescale/mba8mx.dtsi
index f27e3c8de9..ce6d5bdba0 100644
--- a/dts/src/arm64/freescale/mba8mx.dtsi
+++ b/dts/src/arm64/freescale/mba8mx.dtsi
@@ -91,7 +91,7 @@
 
 	sound {
 		compatible = "fsl,imx-audio-tlv320aic32x4";
-		model = "tqm-tlv320aic32";
+		model = "imx-audio-tlv320aic32x4";
 		ssi-controller = <&sai3>;
 		audio-codec = <&tlv320aic3x04>;
 	};
diff --git a/dts/src/arm64/ti/k3-j721s2-common-proc-board.dts b/dts/src/arm64/ti/k3-j721s2-common-proc-board.dts
index a5a24f9f46..b210cc07c5 100644
--- a/dts/src/arm64/ti/k3-j721s2-common-proc-board.dts
+++ b/dts/src/arm64/ti/k3-j721s2-common-proc-board.dts
@@ -15,8 +15,18 @@
 	model = "Texas Instruments J721S2 EVM";
 
 	chosen {
-		stdout-path = "serial10:115200n8";
-		bootargs = "console=ttyS10,115200n8 earlycon=ns16550a,mmio32,2880000";
+		stdout-path = "serial2:115200n8";
+		bootargs = "console=ttyS2,115200n8 earlycon=ns16550a,mmio32,2880000";
+	};
+
+	aliases {
+		serial1 = &mcu_uart0;
+		serial2 = &main_uart8;
+		mmc0 = &main_sdhci0;
+		mmc1 = &main_sdhci1;
+		can0 = &main_mcan16;
+		can1 = &mcu_mcan0;
+		can2 = &mcu_mcan1;
 	};
 
 	evm_12v0: fixedregulator-evm12v0 {
diff --git a/dts/src/arm64/ti/k3-j721s2.dtsi b/dts/src/arm64/ti/k3-j721s2.dtsi
index 80d3cae03e..fe5234c40f 100644
--- a/dts/src/arm64/ti/k3-j721s2.dtsi
+++ b/dts/src/arm64/ti/k3-j721s2.dtsi
@@ -21,28 +21,6 @@
 	#address-cells = <2>;
 	#size-cells = <2>;
 
-	aliases {
-		serial0 = &wkup_uart0;
-		serial1 = &mcu_uart0;
-		serial2 = &main_uart0;
-		serial3 = &main_uart1;
-		serial4 = &main_uart2;
-		serial5 = &main_uart3;
-		serial6 = &main_uart4;
-		serial7 = &main_uart5;
-		serial8 = &main_uart6;
-		serial9 = &main_uart7;
-		serial10 = &main_uart8;
-		serial11 = &main_uart9;
-		mmc0 = &main_sdhci0;
-		mmc1 = &main_sdhci1;
-		can0 = &main_mcan16;
-		can1 = &mcu_mcan0;
-		can2 = &mcu_mcan1;
-		can3 = &main_mcan3;
-		can4 = &main_mcan5;
-	};
-
 	chosen { };
 
 	cpus {
diff --git a/dts/src/mips/ingenic/ci20.dts b/dts/src/mips/ingenic/ci20.dts
index 3e336b3dbb..ab6e3dc0bc 100644
--- a/dts/src/mips/ingenic/ci20.dts
+++ b/dts/src/mips/ingenic/ci20.dts
@@ -83,6 +83,8 @@
 		label = "HDMI OUT";
 		type = "a";
 
+		ddc-en-gpios = <&gpa 25 GPIO_ACTIVE_HIGH>;
+
 		port {
 			hdmi_con: endpoint {
 				remote-endpoint = <&dw_hdmi_out>;
@@ -114,17 +116,6 @@
 		gpio = <&gpf 14 GPIO_ACTIVE_LOW>;
 		enable-active-high;
 	};
-
-	hdmi_power: fixedregulator@3 {
-		compatible = "regulator-fixed";
-
-		regulator-name = "hdmi_power";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-
-		gpio = <&gpa 25 0>;
-		enable-active-high;
-	};
 };
 
 &ext {
@@ -576,8 +567,6 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pins_hdmi_ddc>;
 
-	hdmi-5v-supply = <&hdmi_power>;
-
 	ports {
 		#address-cells = <1>;
 		#size-cells = <0>;