dts: update to v4.4-rc6

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

5 files changed, 14 insertions, 9 deletions

diff --git a/dts/Bindings/dma/ti-edma.txt b/dts/Bindings/dma/ti-edma.txt
index d3d0a4fb1c..079b42a81d 100644
--- a/dts/Bindings/dma/ti-edma.txt
+++ b/dts/Bindings/dma/ti-edma.txt
@@ -22,8 +22,7 @@ Required properties:
 Optional properties:
 - ti,hwmods:	Name of the hwmods associated to the eDMA CC
 - ti,edma-memcpy-channels: List of channels allocated to be used for memcpy, iow
-		these channels will be SW triggered channels. The list must
-		contain 16 bits numbers, see example.
+		these channels will be SW triggered channels. See example.
 - ti,edma-reserved-slot-ranges: PaRAM slot ranges which should not be used by
 		the driver, they are allocated to be used by for example the
 		DSP. See example.
@@ -56,10 +55,9 @@ edma: edma@49000000 {
 	ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 7>, <&edma_tptc2 0>;
 
 	/* Channel 20 and 21 is allocated for memcpy */
-	ti,edma-memcpy-channels = /bits/ 16 <20 21>;
-	/* The following PaRAM slots are reserved: 35-45 and 100-110 */
-	ti,edma-reserved-slot-ranges = /bits/ 16 <35 10>,
-				       /bits/ 16 <100 10>;
+	ti,edma-memcpy-channels = <20 21>;
+	/* The following PaRAM slots are reserved: 35-44 and 100-109 */
+	ti,edma-reserved-slot-ranges = <35 10>, <100 10>;
 };
 
 edma_tptc0: tptc@49800000 {
diff --git a/dts/Bindings/input/sun4i-lradc-keys.txt b/dts/Bindings/input/sun4i-lradc-keys.txt
index b9c32f6fd6..4357e498ef 100644
--- a/dts/Bindings/input/sun4i-lradc-keys.txt
+++ b/dts/Bindings/input/sun4i-lradc-keys.txt
@@ -12,7 +12,7 @@ Each key is represented as a sub-node of "allwinner,sun4i-a10-lradc-keys":
 Required subnode-properties:
 	- label: Descriptive name of the key.
 	- linux,code: Keycode to emit.
-	- channel: Channel this key is attached to, mut be 0 or 1.
+	- channel: Channel this key is attached to, must be 0 or 1.
 	- voltage: Voltage in µV at lradc input when this key is pressed.
 
 Example:
diff --git a/dts/Bindings/mtd/partition.txt b/dts/Bindings/mtd/partition.txt
index f1e2a02381..1c63e40659 100644
--- a/dts/Bindings/mtd/partition.txt
+++ b/dts/Bindings/mtd/partition.txt
@@ -6,7 +6,9 @@ used for what purposes, but which don't use an on-flash partition table such
 as RedBoot.
 
 The partition table should be a subnode of the mtd node and should be named
-'partitions'. Partitions are defined in subnodes of the partitions node.
+'partitions'. This node should have the following property:
+- compatible : (required) must be "fixed-partitions"
+Partitions are then defined in subnodes of the partitions node.
 
 For backwards compatibility partitions as direct subnodes of the mtd device are
 supported. This use is discouraged.
@@ -36,6 +38,7 @@ Examples:
 
 flash@0 {
 	partitions {
+		compatible = "fixed-partitions";
 		#address-cells = <1>;
 		#size-cells = <1>;
 
@@ -53,6 +56,7 @@ flash@0 {
 
 flash@1 {
 	partitions {
+		compatible = "fixed-partitions";
 		#address-cells = <1>;
 		#size-cells = <2>;
 
@@ -66,6 +70,7 @@ flash@1 {
 
 flash@2 {
 	partitions {
+		compatible = "fixed-partitions";
 		#address-cells = <2>;
 		#size-cells = <2>;
 
diff --git a/dts/src/arc/axs10x_mb.dtsi b/dts/src/arc/axs10x_mb.dtsi
index f3db321549..44a578c107 100644
--- a/dts/src/arc/axs10x_mb.dtsi
+++ b/dts/src/arc/axs10x_mb.dtsi
@@ -46,6 +46,7 @@
 			snps,pbl = < 32 >;
 			clocks = <&apbclk>;
 			clock-names = "stmmaceth";
+			max-speed = <100>;
 		};
 
 		ehci@0x40000 {
diff --git a/dts/src/arc/nsim_hs.dts b/dts/src/arc/nsim_hs.dts
index b0eb0e7fe2..fc81879bc1 100644
--- a/dts/src/arc/nsim_hs.dts
+++ b/dts/src/arc/nsim_hs.dts
@@ -17,7 +17,8 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0x0 0x80000000 0x0 0x40000000	/* 1 GB low mem */
+		/* CONFIG_LINUX_LINK_BASE needs to match low mem start */
+		reg = <0x0 0x80000000 0x0 0x20000000	/* 512 MB low mem */
 		       0x1 0x00000000 0x0 0x40000000>;	/* 1 GB highmem */
 	};