summaryrefslogtreecommitdiffstats
path: root/dts
diff options
context:
space:
mode:
authorSascha Hauer <s.hauer@pengutronix.de>2020-01-06 10:50:17 +0100
committerSascha Hauer <s.hauer@pengutronix.de>2020-01-06 10:50:17 +0100
commit089b0370ba1d9080428f7298e586a24e51ba12d3 (patch)
tree3a957e175e399cbc889ca3069dd1befae4f231e4 /dts
parent17a537847ed3b1c0fcae46a43e1374868dc7dae6 (diff)
downloadbarebox-089b0370ba1d9080428f7298e586a24e51ba12d3.tar.gz
dts: update to v5.5-rc3
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Diffstat (limited to 'dts')
-rw-r--r--dts/Bindings/net/can/tcan4x5x.txt4
-rw-r--r--dts/Bindings/net/snps,dwmac.yaml1
-rw-r--r--dts/Bindings/reset/brcm,brcmstb-reset.txt2
-rw-r--r--dts/src/arm/am335x-sancloud-bbe.dts2
-rw-r--r--dts/src/arm/am437x-gp-evm.dts2
-rw-r--r--dts/src/arm/am43x-epos-evm.dts2
-rw-r--r--dts/src/arm/bcm-cygnus.dtsi4
-rw-r--r--dts/src/arm/bcm2711.dtsi2
-rw-r--r--dts/src/arm/bcm283x.dtsi2
-rw-r--r--dts/src/arm/bcm5301x.dtsi4
-rw-r--r--dts/src/arm/e60k02.dtsi5
-rw-r--r--dts/src/arm/imx6ul-14x14-evk.dtsi28
-rw-r--r--dts/src/arm64/freescale/fsl-ls1028a.dtsi10
13 files changed, 42 insertions, 26 deletions
diff --git a/dts/Bindings/net/can/tcan4x5x.txt b/dts/Bindings/net/can/tcan4x5x.txt
index 27e1b4c..6bdcc3f 100644
--- a/dts/Bindings/net/can/tcan4x5x.txt
+++ b/dts/Bindings/net/can/tcan4x5x.txt
@@ -10,7 +10,6 @@ Required properties:
- #size-cells: 0
- spi-max-frequency: Maximum frequency of the SPI bus the chip can
operate at should be less than or equal to 18 MHz.
- - device-wake-gpios: Wake up GPIO to wake up the TCAN device.
- interrupt-parent: the phandle to the interrupt controller which provides
the interrupt.
- interrupts: interrupt specification for data-ready.
@@ -23,6 +22,7 @@ Optional properties:
reset.
- device-state-gpios: Input GPIO that indicates if the device is in
a sleep state or if the device is active.
+ - device-wake-gpios: Wake up GPIO to wake up the TCAN device.
Example:
tcan4x5x: tcan4x5x@0 {
@@ -36,5 +36,5 @@ tcan4x5x: tcan4x5x@0 {
interrupts = <14 GPIO_ACTIVE_LOW>;
device-state-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
device-wake-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
- reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
+ reset-gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>;
};
diff --git a/dts/Bindings/net/snps,dwmac.yaml b/dts/Bindings/net/snps,dwmac.yaml
index 4845e29..e08cd4c 100644
--- a/dts/Bindings/net/snps,dwmac.yaml
+++ b/dts/Bindings/net/snps,dwmac.yaml
@@ -347,6 +347,7 @@ allOf:
- st,spear600-gmac
then:
+ properties:
snps,tso:
$ref: /schemas/types.yaml#definitions/flag
description:
diff --git a/dts/Bindings/reset/brcm,brcmstb-reset.txt b/dts/Bindings/reset/brcm,brcmstb-reset.txt
index 6e5341b..ee59409 100644
--- a/dts/Bindings/reset/brcm,brcmstb-reset.txt
+++ b/dts/Bindings/reset/brcm,brcmstb-reset.txt
@@ -22,6 +22,6 @@ Example:
};
&ethernet_switch {
- resets = <&reset>;
+ resets = <&reset 26>;
reset-names = "switch";
};
diff --git a/dts/src/arm/am335x-sancloud-bbe.dts b/dts/src/arm/am335x-sancloud-bbe.dts
index 8678e6e..e5fdb7a 100644
--- a/dts/src/arm/am335x-sancloud-bbe.dts
+++ b/dts/src/arm/am335x-sancloud-bbe.dts
@@ -108,7 +108,7 @@
&cpsw_emac0 {
phy-handle = <&ethphy0>;
- phy-mode = "rgmii-txid";
+ phy-mode = "rgmii-id";
};
&i2c0 {
diff --git a/dts/src/arm/am437x-gp-evm.dts b/dts/src/arm/am437x-gp-evm.dts
index cae4500..811c8ca 100644
--- a/dts/src/arm/am437x-gp-evm.dts
+++ b/dts/src/arm/am437x-gp-evm.dts
@@ -86,7 +86,7 @@
};
lcd0: display {
- compatible = "osddisplays,osd057T0559-34ts", "panel-dpi";
+ compatible = "osddisplays,osd070t1718-19ts", "panel-dpi";
label = "lcd";
backlight = <&lcd_bl>;
diff --git a/dts/src/arm/am43x-epos-evm.dts b/dts/src/arm/am43x-epos-evm.dts
index 9531412..078cb47 100644
--- a/dts/src/arm/am43x-epos-evm.dts
+++ b/dts/src/arm/am43x-epos-evm.dts
@@ -42,7 +42,7 @@
};
lcd0: display {
- compatible = "osddisplays,osd057T0559-34ts", "panel-dpi";
+ compatible = "osddisplays,osd070t1718-19ts", "panel-dpi";
label = "lcd";
backlight = <&lcd_bl>;
diff --git a/dts/src/arm/bcm-cygnus.dtsi b/dts/src/arm/bcm-cygnus.dtsi
index 2dac3ef..1bc45cf 100644
--- a/dts/src/arm/bcm-cygnus.dtsi
+++ b/dts/src/arm/bcm-cygnus.dtsi
@@ -174,8 +174,8 @@
mdio: mdio@18002000 {
compatible = "brcm,iproc-mdio";
reg = <0x18002000 0x8>;
- #size-cells = <1>;
- #address-cells = <0>;
+ #size-cells = <0>;
+ #address-cells = <1>;
status = "disabled";
gphy0: ethernet-phy@0 {
diff --git a/dts/src/arm/bcm2711.dtsi b/dts/src/arm/bcm2711.dtsi
index 961bed8..e2f6ffb 100644
--- a/dts/src/arm/bcm2711.dtsi
+++ b/dts/src/arm/bcm2711.dtsi
@@ -43,7 +43,7 @@
<0x7c000000 0x0 0xfc000000 0x02000000>,
<0x40000000 0x0 0xff800000 0x00800000>;
/* Emulate a contiguous 30-bit address range for DMA */
- dma-ranges = <0xc0000000 0x0 0x00000000 0x3c000000>;
+ dma-ranges = <0xc0000000 0x0 0x00000000 0x40000000>;
/*
* This node is the provider for the enable-method for
diff --git a/dts/src/arm/bcm283x.dtsi b/dts/src/arm/bcm283x.dtsi
index 3caaa57..8394916 100644
--- a/dts/src/arm/bcm283x.dtsi
+++ b/dts/src/arm/bcm283x.dtsi
@@ -37,7 +37,7 @@
trips {
cpu-crit {
- temperature = <80000>;
+ temperature = <90000>;
hysteresis = <0>;
type = "critical";
};
diff --git a/dts/src/arm/bcm5301x.dtsi b/dts/src/arm/bcm5301x.dtsi
index 372dc1e..2d9b4dd 100644
--- a/dts/src/arm/bcm5301x.dtsi
+++ b/dts/src/arm/bcm5301x.dtsi
@@ -353,8 +353,8 @@
mdio: mdio@18003000 {
compatible = "brcm,iproc-mdio";
reg = <0x18003000 0x8>;
- #size-cells = <1>;
- #address-cells = <0>;
+ #size-cells = <0>;
+ #address-cells = <1>;
};
mdio-bus-mux@18003000 {
diff --git a/dts/src/arm/e60k02.dtsi b/dts/src/arm/e60k02.dtsi
index 6472b05..5a2c532 100644
--- a/dts/src/arm/e60k02.dtsi
+++ b/dts/src/arm/e60k02.dtsi
@@ -265,11 +265,6 @@
regulator-name = "LDORTC1";
regulator-boot-on;
};
-
- ldortc2_reg: LDORTC2 {
- regulator-name = "LDORTC2";
- regulator-boot-on;
- };
};
};
};
diff --git a/dts/src/arm/imx6ul-14x14-evk.dtsi b/dts/src/arm/imx6ul-14x14-evk.dtsi
index 1506eb1..2121445 100644
--- a/dts/src/arm/imx6ul-14x14-evk.dtsi
+++ b/dts/src/arm/imx6ul-14x14-evk.dtsi
@@ -30,14 +30,26 @@
enable-active-high;
};
- reg_sensors: regulator-sensors {
+ reg_peri_3v3: regulator-peri-3v3 {
compatible = "regulator-fixed";
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_sensors_reg>;
- regulator-name = "sensors-supply";
+ pinctrl-0 = <&pinctrl_peri_3v3>;
+ regulator-name = "VPERI_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio5 2 GPIO_ACTIVE_LOW>;
+ /*
+ * If you want to want to make this dynamic please
+ * check schematics and test all affected peripherals:
+ *
+ * - sensors
+ * - ethernet phy
+ * - can
+ * - bluetooth
+ * - wm8960 audio codec
+ * - ov5640 camera
+ */
+ regulator-always-on;
};
reg_can_3v3: regulator-can-3v3 {
@@ -140,6 +152,7 @@
pinctrl-0 = <&pinctrl_enet1>;
phy-mode = "rmii";
phy-handle = <&ethphy0>;
+ phy-supply = <&reg_peri_3v3>;
status = "okay";
};
@@ -148,6 +161,7 @@
pinctrl-0 = <&pinctrl_enet2>;
phy-mode = "rmii";
phy-handle = <&ethphy1>;
+ phy-supply = <&reg_peri_3v3>;
status = "okay";
mdio {
@@ -193,8 +207,8 @@
magnetometer@e {
compatible = "fsl,mag3110";
reg = <0x0e>;
- vdd-supply = <&reg_sensors>;
- vddio-supply = <&reg_sensors>;
+ vdd-supply = <&reg_peri_3v3>;
+ vddio-supply = <&reg_peri_3v3>;
};
};
@@ -227,7 +241,7 @@
flash0: n25q256a@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "micron,n25q256a";
+ compatible = "micron,n25q256a", "jedec,spi-nor";
spi-max-frequency = <29000000>;
spi-rx-bus-width = <4>;
spi-tx-bus-width = <4>;
@@ -462,7 +476,7 @@
>;
};
- pinctrl_sensors_reg: sensorsreggrp {
+ pinctrl_peri_3v3: peri3v3grp {
fsl,pins = <
MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x1b0b0
>;
diff --git a/dts/src/arm64/freescale/fsl-ls1028a.dtsi b/dts/src/arm64/freescale/fsl-ls1028a.dtsi
index 8e8a77e..13a3cbe 100644
--- a/dts/src/arm64/freescale/fsl-ls1028a.dtsi
+++ b/dts/src/arm64/freescale/fsl-ls1028a.dtsi
@@ -88,7 +88,7 @@
reboot {
compatible ="syscon-reboot";
- regmap = <&dcfg>;
+ regmap = <&rst>;
offset = <0xb0>;
mask = <0x02>;
};
@@ -178,6 +178,12 @@
big-endian;
};
+ rst: syscon@1e60000 {
+ compatible = "syscon";
+ reg = <0x0 0x1e60000 0x0 0x10000>;
+ little-endian;
+ };
+
scfg: syscon@1fc0000 {
compatible = "fsl,ls1028a-scfg", "syscon";
reg = <0x0 0x1fc0000 0x0 0x10000>;
@@ -584,7 +590,7 @@
0x00010004 0x0000003d
0x00010005 0x00000045
0x00010006 0x0000004d
- 0x00010007 0x00000045
+ 0x00010007 0x00000055
0x00010008 0x0000005e
0x00010009 0x00000066
0x0001000a 0x0000006e