summaryrefslogtreecommitdiffstats
path: root/dts
diff options
context:
space:
mode:
authorSascha Hauer <s.hauer@pengutronix.de>2019-09-12 10:51:07 +0200
committerSascha Hauer <s.hauer@pengutronix.de>2019-09-12 10:51:07 +0200
commit2da0a124188c06222ce729401733644e246c2a16 (patch)
tree86d82fe3f4d1a574213f90bf74781e8d7047a093 /dts
parent47338967d2cc00b37f887e2eef52af52e3943fce (diff)
downloadbarebox-2da0a124188c06222ce729401733644e246c2a16.tar.gz
dts: update to v5.3-rc5
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Diffstat (limited to 'dts')
-rw-r--r--dts/Bindings/Makefile4
-rw-r--r--dts/Bindings/net/fsl-fec.txt30
-rw-r--r--dts/Bindings/pinctrl/st,stm32-pinctrl.yaml3
3 files changed, 22 insertions, 15 deletions
diff --git a/dts/Bindings/Makefile b/dts/Bindings/Makefile
index 6b0dfd5..5138a2f 100644
--- a/dts/Bindings/Makefile
+++ b/dts/Bindings/Makefile
@@ -19,7 +19,9 @@ quiet_cmd_mk_schema = SCHEMA $@
DT_DOCS = $(shell \
cd $(srctree)/$(src) && \
- find * \( -name '*.yaml' ! -name $(DT_TMP_SCHEMA) \) \
+ find * \( -name '*.yaml' ! \
+ -name $(DT_TMP_SCHEMA) ! \
+ -name '*.example.dt.yaml' \) \
)
DT_SCHEMA_FILES ?= $(addprefix $(src)/,$(DT_DOCS))
diff --git a/dts/Bindings/net/fsl-fec.txt b/dts/Bindings/net/fsl-fec.txt
index 2d41fb9..5b88fae 100644
--- a/dts/Bindings/net/fsl-fec.txt
+++ b/dts/Bindings/net/fsl-fec.txt
@@ -7,18 +7,6 @@ Required properties:
- phy-mode : See ethernet.txt file in the same directory
Optional properties:
-- phy-reset-gpios : Should specify the gpio for phy reset
-- phy-reset-duration : Reset duration in milliseconds. Should present
- only if property "phy-reset-gpios" is available. Missing the property
- will have the duration be 1 millisecond. Numbers greater than 1000 are
- invalid and 1 millisecond will be used instead.
-- phy-reset-active-high : If present then the reset sequence using the GPIO
- specified in the "phy-reset-gpios" property is reversed (H=reset state,
- L=operation state).
-- phy-reset-post-delay : Post reset delay in milliseconds. If present then
- a delay of phy-reset-post-delay milliseconds will be observed after the
- phy-reset-gpios has been toggled. Can be omitted thus no delay is
- observed. Delay is in range of 1ms to 1000ms. Other delays are invalid.
- phy-supply : regulator that powers the Ethernet PHY.
- phy-handle : phandle to the PHY device connected to this device.
- fixed-link : Assume a fixed link. See fixed-link.txt in the same directory.
@@ -47,11 +35,27 @@ Optional properties:
For imx6sx, "int0" handles all 3 queues and ENET_MII. "pps" is for the pulse
per second interrupt associated with 1588 precision time protocol(PTP).
-
Optional subnodes:
- mdio : specifies the mdio bus in the FEC, used as a container for phy nodes
according to phy.txt in the same directory
+Deprecated optional properties:
+ To avoid these, create a phy node according to phy.txt in the same
+ directory, and point the fec's "phy-handle" property to it. Then use
+ the phy's reset binding, again described by phy.txt.
+- phy-reset-gpios : Should specify the gpio for phy reset
+- phy-reset-duration : Reset duration in milliseconds. Should present
+ only if property "phy-reset-gpios" is available. Missing the property
+ will have the duration be 1 millisecond. Numbers greater than 1000 are
+ invalid and 1 millisecond will be used instead.
+- phy-reset-active-high : If present then the reset sequence using the GPIO
+ specified in the "phy-reset-gpios" property is reversed (H=reset state,
+ L=operation state).
+- phy-reset-post-delay : Post reset delay in milliseconds. If present then
+ a delay of phy-reset-post-delay milliseconds will be observed after the
+ phy-reset-gpios has been toggled. Can be omitted thus no delay is
+ observed. Delay is in range of 1ms to 1000ms. Other delays are invalid.
+
Example:
ethernet@83fec000 {
diff --git a/dts/Bindings/pinctrl/st,stm32-pinctrl.yaml b/dts/Bindings/pinctrl/st,stm32-pinctrl.yaml
index 91d3e78..400df2d 100644
--- a/dts/Bindings/pinctrl/st,stm32-pinctrl.yaml
+++ b/dts/Bindings/pinctrl/st,stm32-pinctrl.yaml
@@ -37,7 +37,8 @@ properties:
hwlocks: true
st,syscfg:
- $ref: "/schemas/types.yaml#/definitions/phandle-array"
+ allOf:
+ - $ref: "/schemas/types.yaml#/definitions/phandle-array"
description: Should be phandle/offset/mask
items:
- description: Phandle to the syscon node which includes IRQ mux selection.