|author||Sascha Hauer <email@example.com>||2018-12-07 08:12:07 +0100|
|committer||Sascha Hauer <firstname.lastname@example.org>||2018-12-07 08:12:07 +0100|
dts: update to v4.20-rc4
Signed-off-by: Sascha Hauer <email@example.com>
Diffstat (limited to 'dts')
4 files changed, 20 insertions, 22 deletions
diff --git a/dts/Bindings/net/can/holt_hi311x.txt b/dts/Bindings/net/can/holt_hi311x.txt
index 903a78d..3a9926f 100644
@@ -17,7 +17,7 @@ Example:
reg = <1>;
clocks = <&clk32m>;
interrupt-parent = <&gpio4>;
- interrupts = <13 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <13 IRQ_TYPE_LEVEL_HIGH>;
vdd-supply = <®5v0>;
xceiver-supply = <®5v0>;
diff --git a/dts/Bindings/net/can/rcar_can.txt b/dts/Bindings/net/can/rcar_can.txt
index cc43728..9936b9e 100644
@@ -5,6 +5,7 @@ Required properties:
- compatible: "renesas,can-r8a7743" if CAN controller is a part of R8A7743 SoC.
"renesas,can-r8a7744" if CAN controller is a part of R8A7744 SoC.
"renesas,can-r8a7745" if CAN controller is a part of R8A7745 SoC.
+ "renesas,can-r8a774a1" if CAN controller is a part of R8A774A1 SoC.
"renesas,can-r8a7778" if CAN controller is a part of R8A7778 SoC.
"renesas,can-r8a7779" if CAN controller is a part of R8A7779 SoC.
"renesas,can-r8a7790" if CAN controller is a part of R8A7790 SoC.
@@ -14,26 +15,32 @@ Required properties:
"renesas,can-r8a7794" if CAN controller is a part of R8A7794 SoC.
"renesas,can-r8a7795" if CAN controller is a part of R8A7795 SoC.
"renesas,can-r8a7796" if CAN controller is a part of R8A7796 SoC.
+ "renesas,can-r8a77965" if CAN controller is a part of R8A77965 SoC.
"renesas,rcar-gen1-can" for a generic R-Car Gen1 compatible device.
"renesas,rcar-gen2-can" for a generic R-Car Gen2 or RZ/G1
- "renesas,rcar-gen3-can" for a generic R-Car Gen3 compatible device.
+ "renesas,rcar-gen3-can" for a generic R-Car Gen3 or RZ/G2
+ compatible device.
When compatible with the generic version, nodes must list the
SoC-specific version corresponding to the platform first
followed by the generic version.
- reg: physical base address and size of the R-Car CAN register map.
- interrupts: interrupt specifier for the sole interrupt.
-- clocks: phandles and clock specifiers for 3 CAN clock inputs.
-- clock-names: 3 clock input name strings: "clkp1", "clkp2", "can_clk".
+- clocks: phandles and clock specifiers for 2 CAN clock inputs for RZ/G2
+ phandles and clock specifiers for 3 CAN clock inputs for every other
+- clock-names: 2 clock input name strings for RZ/G2: "clkp1", "can_clk".
+ 3 clock input name strings for every other SoC: "clkp1", "clkp2",
- pinctrl-0: pin control group to be used for this controller.
- pinctrl-names: must be "default".
-Required properties for "renesas,can-r8a7795" and "renesas,can-r8a7796"
-In R8A7795 and R8A7796 SoCs, "clkp2" can be CANFD clock. This is a div6 clock
-and can be used by both CAN and CAN FD controller at the same time. It needs to
-be scaled to maximum frequency if any of these controllers use it. This is done
+Required properties for R8A7795, R8A7796 and R8A77965:
+For the denoted SoCs, "clkp2" can be CANFD clock. This is a div6 clock and can
+be used by both CAN and CAN FD controller at the same time. It needs to be
+scaled to maximum frequency if any of these controllers use it. This is done
using the below properties:
- assigned-clocks: phandle of clkp2(CANFD) clock.
@@ -42,8 +49,9 @@ using the below properties:
- renesas,can-clock-select: R-Car CAN Clock Source Select. Valid values are:
<0x0> (default) : Peripheral clock (clkp1)
- <0x1> : Peripheral clock (clkp2)
- <0x3> : Externally input clock
+ <0x1> : Peripheral clock (clkp2) (not supported by
+ RZ/G2 devices)
+ <0x3> : External input clock
diff --git a/dts/Bindings/net/dsa/dsa.txt b/dts/Bindings/net/dsa/dsa.txt
index 3ceeb8d..35694c0 100644
@@ -7,7 +7,7 @@ limitations.
-Switches are true Linux devices and can be probes by any means. Once
+Switches are true Linux devices and can be probed by any means. Once
probed, they register to the DSA framework, passing a node
pointer. This node is expected to fulfil the following binding, and
may contain additional properties as required by the device it is
diff --git a/dts/include/dt-bindings/input/linux-event-codes.h b/dts/include/dt-bindings/input/linux-event-codes.h
index 6d180cc..3eb5a4c 100644
@@ -716,7 +716,6 @@
* the situation described above.
#define REL_RESERVED 0x0a
-#define REL_WHEEL_HI_RES 0x0b
#define REL_MAX 0x0f
#define REL_CNT (REL_MAX+1)
@@ -753,15 +752,6 @@
#define ABS_MISC 0x28
- * 0x2e is reserved and should not be used in input drivers.
- * It was used by HID as ABS_MISC+6 and userspace needs to detect if
- * the next ABS_* event is correct or is just ABS_MISC + n.
- * We define here ABS_RESERVED so userspace can rely on it and detect
- * the situation described above.
-#define ABS_RESERVED 0x2e
#define ABS_MT_SLOT 0x2f /* MT slot being modified */
#define ABS_MT_TOUCH_MAJOR 0x30 /* Major axis of touching ellipse */
#define ABS_MT_TOUCH_MINOR 0x31 /* Minor axis (omit if circular) */