summaryrefslogtreecommitdiffstats
path: root/dts
diff options
context:
space:
mode:
authorSascha Hauer <s.hauer@pengutronix.de>2018-05-08 08:15:03 +0200
committerSascha Hauer <s.hauer@pengutronix.de>2018-05-08 08:15:03 +0200
commite2d1aab783e4d3a03525144446ccdc43d066b041 (patch)
treea3f1cd35a18d8edc30d504093cac4bc55c391bca /dts
parent5f713938cb13447de8fdc27d93b2197d2e870cf4 (diff)
downloadbarebox-e2d1aab783e4d3a03525144446ccdc43d066b041.tar.gz
dts: update to v4.17-rc3
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Diffstat (limited to 'dts')
-rw-r--r--dts/Bindings/serial/amlogic,meson-uart.txt2
-rw-r--r--dts/Bindings/serial/mvebu-uart.txt2
-rw-r--r--dts/Bindings/serial/renesas,sci-serial.txt2
-rw-r--r--dts/Bindings/usb/usb-xhci.txt5
-rw-r--r--dts/src/arm/gemini-nas4220b.dts28
-rw-r--r--dts/src/arm/omap4.dtsi8
-rw-r--r--dts/src/arm64/amlogic/meson-gx-p23x-q20x.dtsi4
-rw-r--r--dts/src/arm64/amlogic/meson-gxl-s905x-libretech-cc.dts12
-rw-r--r--dts/src/arm64/amlogic/meson-gxl-s905x-nexbox-a95x.dts4
-rw-r--r--dts/src/arm64/amlogic/meson-gxl-s905x-p212.dtsi4
-rw-r--r--dts/src/arm64/amlogic/meson-gxl.dtsi61
-rw-r--r--dts/src/arm64/amlogic/meson-gxm-khadas-vim2.dts4
-rw-r--r--dts/src/arm64/amlogic/meson-gxm.dtsi17
-rw-r--r--dts/src/arm64/arm/juno-motherboard.dtsi2
-rw-r--r--dts/src/arm64/broadcom/stingray/stingray-sata.dtsi80
15 files changed, 172 insertions, 63 deletions
diff --git a/dts/Bindings/serial/amlogic,meson-uart.txt b/dts/Bindings/serial/amlogic,meson-uart.txt
index 8ff65fa..c06c045 100644
--- a/dts/Bindings/serial/amlogic,meson-uart.txt
+++ b/dts/Bindings/serial/amlogic,meson-uart.txt
@@ -21,7 +21,7 @@ Required properties:
- interrupts : identifier to the device interrupt
- clocks : a list of phandle + clock-specifier pairs, one for each
entry in clock names.
-- clocks-names :
+- clock-names :
* "xtal" for external xtal clock identifier
* "pclk" for the bus core clock, either the clk81 clock or the gate clock
* "baud" for the source of the baudrate generator, can be either the xtal
diff --git a/dts/Bindings/serial/mvebu-uart.txt b/dts/Bindings/serial/mvebu-uart.txt
index 2ae2fee..b7e0e32 100644
--- a/dts/Bindings/serial/mvebu-uart.txt
+++ b/dts/Bindings/serial/mvebu-uart.txt
@@ -24,7 +24,7 @@ Required properties:
- Must contain two elements for the extended variant of the IP
(marvell,armada-3700-uart-ext): "uart-tx" and "uart-rx",
respectively the UART TX interrupt and the UART RX interrupt. A
- corresponding interrupts-names property must be defined.
+ corresponding interrupt-names property must be defined.
- For backward compatibility reasons, a single element interrupts
property is also supported for the standard variant of the IP,
containing only the UART sum interrupt. This form is deprecated
diff --git a/dts/Bindings/serial/renesas,sci-serial.txt b/dts/Bindings/serial/renesas,sci-serial.txt
index ad962f4..a006ea4 100644
--- a/dts/Bindings/serial/renesas,sci-serial.txt
+++ b/dts/Bindings/serial/renesas,sci-serial.txt
@@ -17,6 +17,8 @@ Required properties:
- "renesas,scifa-r8a7745" for R8A7745 (RZ/G1E) SCIFA compatible UART.
- "renesas,scifb-r8a7745" for R8A7745 (RZ/G1E) SCIFB compatible UART.
- "renesas,hscif-r8a7745" for R8A7745 (RZ/G1E) HSCIF compatible UART.
+ - "renesas,scif-r8a77470" for R8A77470 (RZ/G1C) SCIF compatible UART.
+ - "renesas,hscif-r8a77470" for R8A77470 (RZ/G1C) HSCIF compatible UART.
- "renesas,scif-r8a7778" for R8A7778 (R-Car M1) SCIF compatible UART.
- "renesas,scif-r8a7779" for R8A7779 (R-Car H1) SCIF compatible UART.
- "renesas,scif-r8a7790" for R8A7790 (R-Car H2) SCIF compatible UART.
diff --git a/dts/Bindings/usb/usb-xhci.txt b/dts/Bindings/usb/usb-xhci.txt
index c4c00df..bd1dd31 100644
--- a/dts/Bindings/usb/usb-xhci.txt
+++ b/dts/Bindings/usb/usb-xhci.txt
@@ -28,7 +28,10 @@ Required properties:
- interrupts: one XHCI interrupt should be described here.
Optional properties:
- - clocks: reference to a clock
+ - clocks: reference to the clocks
+ - clock-names: mandatory if there is a second clock, in this case
+ the name must be "core" for the first clock and "reg" for the
+ second one
- usb2-lpm-disable: indicate if we don't want to enable USB2 HW LPM
- usb3-lpm-capable: determines if platform is USB3 LPM capable
- quirk-broken-port-ped: set if the controller has broken port disable mechanism
diff --git a/dts/src/arm/gemini-nas4220b.dts b/dts/src/arm/gemini-nas4220b.dts
index 8bbb6f8..4785fbc 100644
--- a/dts/src/arm/gemini-nas4220b.dts
+++ b/dts/src/arm/gemini-nas4220b.dts
@@ -134,37 +134,37 @@
function = "gmii";
groups = "gmii_gmac0_grp";
};
- /* Settings come from OpenWRT */
+ /* Settings come from OpenWRT, pins on SL3516 */
conf0 {
- pins = "R8 GMAC0 RXDV", "U11 GMAC1 RXDV";
+ pins = "V8 GMAC0 RXDV", "T10 GMAC1 RXDV";
skew-delay = <0>;
};
conf1 {
- pins = "T8 GMAC0 RXC", "T11 GMAC1 RXC";
+ pins = "Y7 GMAC0 RXC", "Y11 GMAC1 RXC";
skew-delay = <15>;
};
conf2 {
- pins = "P8 GMAC0 TXEN", "V11 GMAC1 TXEN";
+ pins = "T8 GMAC0 TXEN", "W11 GMAC1 TXEN";
skew-delay = <7>;
};
conf3 {
- pins = "V7 GMAC0 TXC";
+ pins = "U8 GMAC0 TXC";
skew-delay = <11>;
};
conf4 {
- pins = "P10 GMAC1 TXC";
+ pins = "V11 GMAC1 TXC";
skew-delay = <10>;
};
conf5 {
/* The data lines all have default skew */
- pins = "U8 GMAC0 RXD0", "V8 GMAC0 RXD1",
- "P9 GMAC0 RXD2", "R9 GMAC0 RXD3",
- "U7 GMAC0 TXD0", "T7 GMAC0 TXD1",
- "R7 GMAC0 TXD2", "P7 GMAC0 TXD3",
- "R11 GMAC1 RXD0", "P11 GMAC1 RXD1",
- "V12 GMAC1 RXD2", "U12 GMAC1 RXD3",
- "R10 GMAC1 TXD0", "T10 GMAC1 TXD1",
- "U10 GMAC1 TXD2", "V10 GMAC1 TXD3";
+ pins = "W8 GMAC0 RXD0", "V9 GMAC0 RXD1",
+ "Y8 GMAC0 RXD2", "U9 GMAC0 RXD3",
+ "T7 GMAC0 TXD0", "U6 GMAC0 TXD1",
+ "V7 GMAC0 TXD2", "U7 GMAC0 TXD3",
+ "Y12 GMAC1 RXD0", "V12 GMAC1 RXD1",
+ "T11 GMAC1 RXD2", "W12 GMAC1 RXD3",
+ "U10 GMAC1 TXD0", "Y10 GMAC1 TXD1",
+ "W10 GMAC1 TXD2", "T9 GMAC1 TXD3";
skew-delay = <7>;
};
/* Set up drive strength on GMAC0 to 16 mA */
diff --git a/dts/src/arm/omap4.dtsi b/dts/src/arm/omap4.dtsi
index 4759048..e554b6e 100644
--- a/dts/src/arm/omap4.dtsi
+++ b/dts/src/arm/omap4.dtsi
@@ -163,10 +163,10 @@
cm2: cm2@8000 {
compatible = "ti,omap4-cm2", "simple-bus";
- reg = <0x8000 0x3000>;
+ reg = <0x8000 0x2000>;
#address-cells = <1>;
#size-cells = <1>;
- ranges = <0 0x8000 0x3000>;
+ ranges = <0 0x8000 0x2000>;
cm2_clocks: clocks {
#address-cells = <1>;
@@ -250,11 +250,11 @@
prm: prm@6000 {
compatible = "ti,omap4-prm";
- reg = <0x6000 0x3000>;
+ reg = <0x6000 0x2000>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <1>;
- ranges = <0 0x6000 0x3000>;
+ ranges = <0 0x6000 0x2000>;
prm_clocks: clocks {
#address-cells = <1>;
diff --git a/dts/src/arm64/amlogic/meson-gx-p23x-q20x.dtsi b/dts/src/arm64/amlogic/meson-gx-p23x-q20x.dtsi
index 4eef36b..88e712e 100644
--- a/dts/src/arm64/amlogic/meson-gx-p23x-q20x.dtsi
+++ b/dts/src/arm64/amlogic/meson-gx-p23x-q20x.dtsi
@@ -212,3 +212,7 @@
pinctrl-0 = <&uart_ao_a_pins>;
pinctrl-names = "default";
};
+
+&usb0 {
+ status = "okay";
+};
diff --git a/dts/src/arm64/amlogic/meson-gxl-s905x-libretech-cc.dts b/dts/src/arm64/amlogic/meson-gxl-s905x-libretech-cc.dts
index 22bf374..3e3eb31 100644
--- a/dts/src/arm64/amlogic/meson-gxl-s905x-libretech-cc.dts
+++ b/dts/src/arm64/amlogic/meson-gxl-s905x-libretech-cc.dts
@@ -271,3 +271,15 @@
pinctrl-0 = <&uart_ao_a_pins>;
pinctrl-names = "default";
};
+
+&usb0 {
+ status = "okay";
+};
+
+&usb2_phy0 {
+ /*
+ * even though the schematics don't show it:
+ * HDMI_5V is also used as supply for the USB VBUS.
+ */
+ phy-supply = <&hdmi_5v>;
+};
diff --git a/dts/src/arm64/amlogic/meson-gxl-s905x-nexbox-a95x.dts b/dts/src/arm64/amlogic/meson-gxl-s905x-nexbox-a95x.dts
index 69c721a..6739697 100644
--- a/dts/src/arm64/amlogic/meson-gxl-s905x-nexbox-a95x.dts
+++ b/dts/src/arm64/amlogic/meson-gxl-s905x-nexbox-a95x.dts
@@ -215,3 +215,7 @@
pinctrl-0 = <&uart_ao_a_pins>;
pinctrl-names = "default";
};
+
+&usb0 {
+ status = "okay";
+};
diff --git a/dts/src/arm64/amlogic/meson-gxl-s905x-p212.dtsi b/dts/src/arm64/amlogic/meson-gxl-s905x-p212.dtsi
index 0a0953f..0cfd701 100644
--- a/dts/src/arm64/amlogic/meson-gxl-s905x-p212.dtsi
+++ b/dts/src/arm64/amlogic/meson-gxl-s905x-p212.dtsi
@@ -185,3 +185,7 @@
pinctrl-0 = <&uart_ao_a_pins>;
pinctrl-names = "default";
};
+
+&usb0 {
+ status = "okay";
+};
diff --git a/dts/src/arm64/amlogic/meson-gxl.dtsi b/dts/src/arm64/amlogic/meson-gxl.dtsi
index e1a39cb..dba365e 100644
--- a/dts/src/arm64/amlogic/meson-gxl.dtsi
+++ b/dts/src/arm64/amlogic/meson-gxl.dtsi
@@ -20,6 +20,67 @@
no-map;
};
};
+
+ soc {
+ usb0: usb@c9000000 {
+ status = "disabled";
+ compatible = "amlogic,meson-gxl-dwc3";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ clocks = <&clkc CLKID_USB>;
+ clock-names = "usb_general";
+ resets = <&reset RESET_USB_OTG>;
+ reset-names = "usb_otg";
+
+ dwc3: dwc3@c9000000 {
+ compatible = "snps,dwc3";
+ reg = <0x0 0xc9000000 0x0 0x100000>;
+ interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ dr_mode = "host";
+ maximum-speed = "high-speed";
+ snps,dis_u2_susphy_quirk;
+ phys = <&usb3_phy>, <&usb2_phy0>, <&usb2_phy1>;
+ };
+ };
+ };
+};
+
+&apb {
+ usb2_phy0: phy@78000 {
+ compatible = "amlogic,meson-gxl-usb2-phy";
+ #phy-cells = <0>;
+ reg = <0x0 0x78000 0x0 0x20>;
+ clocks = <&clkc CLKID_USB>;
+ clock-names = "phy";
+ resets = <&reset RESET_USB_OTG>;
+ reset-names = "phy";
+ status = "okay";
+ };
+
+ usb2_phy1: phy@78020 {
+ compatible = "amlogic,meson-gxl-usb2-phy";
+ #phy-cells = <0>;
+ reg = <0x0 0x78020 0x0 0x20>;
+ clocks = <&clkc CLKID_USB>;
+ clock-names = "phy";
+ resets = <&reset RESET_USB_OTG>;
+ reset-names = "phy";
+ status = "okay";
+ };
+
+ usb3_phy: phy@78080 {
+ compatible = "amlogic,meson-gxl-usb3-phy";
+ #phy-cells = <0>;
+ reg = <0x0 0x78080 0x0 0x20>;
+ interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clkc CLKID_USB>, <&clkc_AO CLKID_AO_CEC_32K>;
+ clock-names = "phy", "peripheral";
+ resets = <&reset RESET_USB_OTG>, <&reset RESET_USB_OTG>;
+ reset-names = "phy", "peripheral";
+ status = "okay";
+ };
};
&ethmac {
diff --git a/dts/src/arm64/amlogic/meson-gxm-khadas-vim2.dts b/dts/src/arm64/amlogic/meson-gxm-khadas-vim2.dts
index 4fd46c1..0868da4 100644
--- a/dts/src/arm64/amlogic/meson-gxm-khadas-vim2.dts
+++ b/dts/src/arm64/amlogic/meson-gxm-khadas-vim2.dts
@@ -406,3 +406,7 @@
status = "okay";
vref-supply = <&vddio_ao18>;
};
+
+&usb0 {
+ status = "okay";
+};
diff --git a/dts/src/arm64/amlogic/meson-gxm.dtsi b/dts/src/arm64/amlogic/meson-gxm.dtsi
index d076a7c..247888d 100644
--- a/dts/src/arm64/amlogic/meson-gxm.dtsi
+++ b/dts/src/arm64/amlogic/meson-gxm.dtsi
@@ -80,6 +80,19 @@
};
};
+&apb {
+ usb2_phy2: phy@78040 {
+ compatible = "amlogic,meson-gxl-usb2-phy";
+ #phy-cells = <0>;
+ reg = <0x0 0x78040 0x0 0x20>;
+ clocks = <&clkc CLKID_USB>;
+ clock-names = "phy";
+ resets = <&reset RESET_USB_OTG>;
+ reset-names = "phy";
+ status = "okay";
+ };
+};
+
&clkc_AO {
compatible = "amlogic,meson-gxm-aoclkc", "amlogic,meson-gx-aoclkc";
};
@@ -100,3 +113,7 @@
&hdmi_tx {
compatible = "amlogic,meson-gxm-dw-hdmi", "amlogic,meson-gx-dw-hdmi";
};
+
+&dwc3 {
+ phys = <&usb3_phy>, <&usb2_phy0>, <&usb2_phy1>, <&usb2_phy2>;
+};
diff --git a/dts/src/arm64/arm/juno-motherboard.dtsi b/dts/src/arm64/arm/juno-motherboard.dtsi
index 2ac4322..69804c5 100644
--- a/dts/src/arm64/arm/juno-motherboard.dtsi
+++ b/dts/src/arm64/arm/juno-motherboard.dtsi
@@ -56,8 +56,6 @@
gpio_keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
power-button {
debounce_interval = <50>;
diff --git a/dts/src/arm64/broadcom/stingray/stingray-sata.dtsi b/dts/src/arm64/broadcom/stingray/stingray-sata.dtsi
index 4b5465d..8c68e0c 100644
--- a/dts/src/arm64/broadcom/stingray/stingray-sata.dtsi
+++ b/dts/src/arm64/broadcom/stingray/stingray-sata.dtsi
@@ -36,11 +36,11 @@
#size-cells = <1>;
ranges = <0x0 0x0 0x67d00000 0x00800000>;
- sata0: ahci@210000 {
+ sata0: ahci@0 {
compatible = "brcm,iproc-ahci", "generic-ahci";
- reg = <0x00210000 0x1000>;
+ reg = <0x00000000 0x1000>;
reg-names = "ahci";
- interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -52,9 +52,9 @@
};
};
- sata_phy0: sata_phy@212100 {
+ sata_phy0: sata_phy@2100 {
compatible = "brcm,iproc-sr-sata-phy";
- reg = <0x00212100 0x1000>;
+ reg = <0x00002100 0x1000>;
reg-names = "phy";
#address-cells = <1>;
#size-cells = <0>;
@@ -66,11 +66,11 @@
};
};
- sata1: ahci@310000 {
+ sata1: ahci@10000 {
compatible = "brcm,iproc-ahci", "generic-ahci";
- reg = <0x00310000 0x1000>;
+ reg = <0x00010000 0x1000>;
reg-names = "ahci";
- interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -82,9 +82,9 @@
};
};
- sata_phy1: sata_phy@312100 {
+ sata_phy1: sata_phy@12100 {
compatible = "brcm,iproc-sr-sata-phy";
- reg = <0x00312100 0x1000>;
+ reg = <0x00012100 0x1000>;
reg-names = "phy";
#address-cells = <1>;
#size-cells = <0>;
@@ -96,11 +96,11 @@
};
};
- sata2: ahci@120000 {
+ sata2: ahci@20000 {
compatible = "brcm,iproc-ahci", "generic-ahci";
- reg = <0x00120000 0x1000>;
+ reg = <0x00020000 0x1000>;
reg-names = "ahci";
- interrupts = <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -112,9 +112,9 @@
};
};
- sata_phy2: sata_phy@122100 {
+ sata_phy2: sata_phy@22100 {
compatible = "brcm,iproc-sr-sata-phy";
- reg = <0x00122100 0x1000>;
+ reg = <0x00022100 0x1000>;
reg-names = "phy";
#address-cells = <1>;
#size-cells = <0>;
@@ -126,11 +126,11 @@
};
};
- sata3: ahci@130000 {
+ sata3: ahci@30000 {
compatible = "brcm,iproc-ahci", "generic-ahci";
- reg = <0x00130000 0x1000>;
+ reg = <0x00030000 0x1000>;
reg-names = "ahci";
- interrupts = <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -142,9 +142,9 @@
};
};
- sata_phy3: sata_phy@132100 {
+ sata_phy3: sata_phy@32100 {
compatible = "brcm,iproc-sr-sata-phy";
- reg = <0x00132100 0x1000>;
+ reg = <0x00032100 0x1000>;
reg-names = "phy";
#address-cells = <1>;
#size-cells = <0>;
@@ -156,11 +156,11 @@
};
};
- sata4: ahci@330000 {
+ sata4: ahci@100000 {
compatible = "brcm,iproc-ahci", "generic-ahci";
- reg = <0x00330000 0x1000>;
+ reg = <0x00100000 0x1000>;
reg-names = "ahci";
- interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -172,9 +172,9 @@
};
};
- sata_phy4: sata_phy@332100 {
+ sata_phy4: sata_phy@102100 {
compatible = "brcm,iproc-sr-sata-phy";
- reg = <0x00332100 0x1000>;
+ reg = <0x00102100 0x1000>;
reg-names = "phy";
#address-cells = <1>;
#size-cells = <0>;
@@ -186,11 +186,11 @@
};
};
- sata5: ahci@400000 {
+ sata5: ahci@110000 {
compatible = "brcm,iproc-ahci", "generic-ahci";
- reg = <0x00400000 0x1000>;
+ reg = <0x00110000 0x1000>;
reg-names = "ahci";
- interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -202,9 +202,9 @@
};
};
- sata_phy5: sata_phy@402100 {
+ sata_phy5: sata_phy@112100 {
compatible = "brcm,iproc-sr-sata-phy";
- reg = <0x00402100 0x1000>;
+ reg = <0x00112100 0x1000>;
reg-names = "phy";
#address-cells = <1>;
#size-cells = <0>;
@@ -216,11 +216,11 @@
};
};
- sata6: ahci@410000 {
+ sata6: ahci@120000 {
compatible = "brcm,iproc-ahci", "generic-ahci";
- reg = <0x00410000 0x1000>;
+ reg = <0x00120000 0x1000>;
reg-names = "ahci";
- interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -232,9 +232,9 @@
};
};
- sata_phy6: sata_phy@412100 {
+ sata_phy6: sata_phy@122100 {
compatible = "brcm,iproc-sr-sata-phy";
- reg = <0x00412100 0x1000>;
+ reg = <0x00122100 0x1000>;
reg-names = "phy";
#address-cells = <1>;
#size-cells = <0>;
@@ -246,11 +246,11 @@
};
};
- sata7: ahci@420000 {
+ sata7: ahci@130000 {
compatible = "brcm,iproc-ahci", "generic-ahci";
- reg = <0x00420000 0x1000>;
+ reg = <0x00130000 0x1000>;
reg-names = "ahci";
- interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -262,9 +262,9 @@
};
};
- sata_phy7: sata_phy@422100 {
+ sata_phy7: sata_phy@132100 {
compatible = "brcm,iproc-sr-sata-phy";
- reg = <0x00422100 0x1000>;
+ reg = <0x00132100 0x1000>;
reg-names = "phy";
#address-cells = <1>;
#size-cells = <0>;