miidev: consistent md and mw on phy regs

The dump generated by "md -w -s /dev/phy0"
suggests individual registers need to be
addressed by byte offset, not by register number.
E.g. to set the autonegotiation advertisement register
for 10Mbit only, use "mw -w -d /dev/phy0 8+2 0x0061".
The current mix of offset == register number, but
count == byte count is unintuitive.

Also, to be consistent with "md" on /dev/mem, round up
the count so "8+1" also works to access one register.
However, no attempt is made to do read-modify-write
single byte writes.

Signed-off-by: Johannes Stezenbach <js@sig21.net>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

0 files changed, 0 insertions, 0 deletions