diff options
| -rw-r--r-- | drivers/ata/Kconfig | 7 | ||||
| -rw-r--r-- | drivers/ata/Makefile | 1 | ||||
| -rw-r--r-- | drivers/ata/intf_platform_ide.c | 130 | ||||
| -rw-r--r-- | include/platform_ide.h | 32 |
4 files changed, 170 insertions, 0 deletions
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index f4334c2ce9..fe6f5e6f5d 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -32,4 +32,11 @@ config DISK_ATA comment "interface types" +config DISK_INTF_PLATFORM_IDE + bool "Platform IDE" + select DISK_ATA + help + Generic platform driver for simple IDE like interfaces to a connected + ATA device. + endif diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile index cdbcbe7dbb..2560076d26 100644 --- a/drivers/ata/Makefile +++ b/drivers/ata/Makefile @@ -5,3 +5,4 @@ obj-$(CONFIG_DISK_ATA) += disk_ata_drive.o # interface types +obj-$(CONFIG_DISK_INTF_PLATFORM_IDE) += intf_platform_ide.o diff --git a/drivers/ata/intf_platform_ide.c b/drivers/ata/intf_platform_ide.c new file mode 100644 index 0000000000..1955a9cb6c --- /dev/null +++ b/drivers/ata/intf_platform_ide.c @@ -0,0 +1,130 @@ +/* + * Copyright (C) 2011 Juergen Beisert, Pengutronix + * + * Derived from the Linux kernel: Generic platform device PATA driver + * Copyright (C) 2006 - 2007 Paul Mundt + * Based on pata_pcmcia: + * Copyright 2005-2006 Red Hat Inc, all rights reserved. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <common.h> +#include <init.h> +#include <xfuncs.h> +#include <malloc.h> +#include <errno.h> +#include <ata_drive.h> +#include <platform_ide.h> + +/** + * Setup the register specific addresses for an ATA like divice + * @param reg_base Base address of the standard ATA like registers + * @param alt_base Base address of the alternate ATA like registers + * @param ioaddr Register file structure to setup + * @param shift Shift offset between registers + * + * Some of the registers have different names but use the same offset. This is + * due to the fact read or write access at the same offset reaches different + * registers. + */ +static void platform_ide_setup_port(void *reg_base, void *alt_base, + struct ata_ioports *ioaddr, unsigned shift) +{ + /* standard registers (0 ... 7) */ + ioaddr->cmd_addr = reg_base; + + ioaddr->data_addr = reg_base + (IDE_REG_DATA << shift); + + ioaddr->error_addr = reg_base + (IDE_REG_ERR << shift); + ioaddr->feature_addr = reg_base + (IDE_REG_FEATURE << shift); + + ioaddr->nsect_addr = reg_base + (IDE_REG_NSECT << shift); + + ioaddr->lbal_addr = reg_base + (IDE_REG_LBAL << shift); + + ioaddr->lbam_addr = reg_base + (IDE_REG_LBAM << shift); + + ioaddr->lbah_addr = reg_base + (IDE_REG_LBAH << shift); + + ioaddr->device_addr = reg_base + (IDE_REG_DEVICE << shift); + + ioaddr->status_addr = reg_base + (IDE_REG_STATUS << shift); + ioaddr->command_addr = reg_base + (IDE_REG_CMD << shift); + + ioaddr->altstatus_addr = alt_base + (IDE_REG_ALT_STATUS << shift); + ioaddr->ctl_addr = alt_base + (IDE_REG_DEV_CTL << shift); + + ioaddr->alt_dev_addr = alt_base + (IDE_REG_DRV_ADDR << shift); +} + +static int platform_ide_probe(struct device_d *dev) +{ + int rc; + struct ide_port_info *pdata = dev->platform_data; + struct ata_ioports *io; + void *reg_base, *alt_base; + + if (pdata == NULL) { + dev_err(dev, "No platform data. Cannot continue\n"); + return -EINVAL; + } + + io = xzalloc(sizeof(struct ata_ioports)); + reg_base = dev_request_mem_region(dev, 0); + alt_base = dev_request_mem_region(dev, 1); + platform_ide_setup_port(reg_base, alt_base, io, pdata->ioport_shift); + io->reset = pdata->reset; + io->dataif_be = pdata->dataif_be; + + rc = register_ata_drive(dev, io); + if (rc != 0) { + dev_err(dev, "Cannot register IDE interface\n"); + free(io); + } + + return rc; +} + +static struct driver_d platform_ide_driver = { + .name = "ide_intf", + .probe = platform_ide_probe, +}; + +static int platform_ide_init(void) +{ + return register_driver(&platform_ide_driver); +} + +device_initcall(platform_ide_init); + +/** + * @file + * @brief Interface driver for an ATA drive behind an IDE like interface + * + * This communication driver does all accesses to the drive via memory IO + * instructions. + * + * This kind of interface is also useable for regular bus like access, when + * there is no dedicated IDE available. + * + * "IDE like" means the platform data defines addresses to the register file + * of the attached ATA drive. + * + * This driver does not change any access timings due to the fact it has no idea + * how to do so. So, do not expect an impressive data throughput. + * + * @todo Support also the IO port access method, the x86 architecture is using + */ diff --git a/include/platform_ide.h b/include/platform_ide.h new file mode 100644 index 0000000000..f71fbfbc01 --- /dev/null +++ b/include/platform_ide.h @@ -0,0 +1,32 @@ +/* + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __PLATFORM_IDE_H +#define __PLATFORM_IDE_H + +struct ide_port_info { + /* + * I/O port shift, for platforms with ports that are + * constantly spaced and need larger than the 1-byte + * spacing + */ + unsigned ioport_shift; + int dataif_be; /* true if 16 bit data register is big endian */ + + /* handle hard reset of this port */ + void (*reset)(int); /* true: assert reset, false: de-assert reset */ +}; + +#endif /* __PLATFORM_IDE_H */ |