summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--arch/arm/boards/eukrea_cpuimx35/eukrea_cpuimx35.c100
-rw-r--r--arch/arm/boards/eukrea_cpuimx35/lowlevel.c24
-rw-r--r--arch/arm/boards/freescale-mx35-3-stack/3stack.c78
-rw-r--r--arch/arm/boards/freescale-mx35-3-stack/lowlevel_init.S6
-rw-r--r--arch/arm/boards/guf-cupid/board.c74
-rw-r--r--arch/arm/boards/guf-cupid/lowlevel.c28
-rw-r--r--arch/arm/boards/pcm043/lowlevel.c26
-rw-r--r--arch/arm/boards/pcm043/pcm043.c78
-rw-r--r--arch/arm/mach-imx/imx35.c14
-rw-r--r--arch/arm/mach-imx/include/mach/devices-imx35.h34
-rw-r--r--arch/arm/mach-imx/include/mach/imx35-regs.h163
-rw-r--r--arch/arm/mach-imx/speed-imx35.c30
12 files changed, 369 insertions, 286 deletions
diff --git a/arch/arm/boards/eukrea_cpuimx35/eukrea_cpuimx35.c b/arch/arm/boards/eukrea_cpuimx35/eukrea_cpuimx35.c
index 3c7fb6992e..53cc428c84 100644
--- a/arch/arm/boards/eukrea_cpuimx35/eukrea_cpuimx35.c
+++ b/arch/arm/boards/eukrea_cpuimx35/eukrea_cpuimx35.c
@@ -97,21 +97,21 @@ static void imx35_usb_init(void)
unsigned int tmp;
/* Host 1 */
- tmp = readl(IMX_OTG_BASE + 0x600);
+ tmp = readl(MX35_USB_OTG_BASE_ADDR + 0x600);
tmp &= ~(MX35_H1_SIC_MASK | MX35_H1_PM_BIT | MX35_H1_TLL_BIT |
MX35_H1_USBTE_BIT | MX35_H1_IPPUE_DOWN_BIT | MX35_H1_IPPUE_UP_BIT);
tmp |= (MXC_EHCI_INTERFACE_SINGLE_UNI) << MX35_H1_SIC_SHIFT;
tmp |= MX35_H1_USBTE_BIT | MX35_H1_PM_BIT | MX35_H1_TLL_BIT ;
tmp |= MX35_H1_IPPUE_DOWN_BIT;
- writel(tmp, IMX_OTG_BASE + 0x600);
+ writel(tmp, MX35_USB_OTG_BASE_ADDR + 0x600);
- tmp = readl(IMX_OTG_BASE + 0x584);
+ tmp = readl(MX35_USB_OTG_BASE_ADDR + 0x584);
tmp |= 3 << 30;
- writel(tmp, IMX_OTG_BASE + 0x584);
+ writel(tmp, MX35_USB_OTG_BASE_ADDR + 0x584);
/* Set to Host mode */
- tmp = readl(IMX_OTG_BASE + 0x5a8);
- writel(tmp | 0x3, IMX_OTG_BASE + 0x5a8);
+ tmp = readl(MX35_USB_OTG_BASE_ADDR + 0x5a8);
+ writel(tmp | 0x3, MX35_USB_OTG_BASE_ADDR + 0x5a8);
}
#endif
@@ -124,7 +124,7 @@ static struct fsl_usb2_platform_data usb_pdata = {
static int eukrea_cpuimx35_mem_init(void)
{
- arm_add_mem_device("ram0", IMX_SDRAM_CS0, 128 * 1024 * 1024);
+ arm_add_mem_device("ram0", MX35_CSD0_BASE_ADDR, 128 * 1024 * 1024);
return 0;
}
@@ -216,13 +216,13 @@ static int eukrea_cpuimx35_devices_init(void)
#ifdef CONFIG_USB
imx35_usb_init();
- add_generic_usb_ehci_device(DEVICE_ID_DYNAMIC, IMX_OTG_BASE + 0x400, NULL);
+ add_generic_usb_ehci_device(DEVICE_ID_DYNAMIC, MX35_USB_HS_BASE_ADDR, NULL);
#endif
#ifdef CONFIG_USB_GADGET
/* Workaround ENGcm09152 */
- tmp = readl(IMX_OTG_BASE + 0x608);
- writel(tmp | (1 << 23), IMX_OTG_BASE + 0x608);
- add_generic_device("fsl-udc", DEVICE_ID_DYNAMIC, NULL, IMX_OTG_BASE, 0x200,
+ tmp = readl(MX35_USB_OTG_BASE_ADDR + 0x608);
+ writel(tmp | (1 << 23), MX35_USB_OTG_BASE_ADDR + 0x608);
+ add_generic_device("fsl-udc", DEVICE_ID_DYNAMIC, NULL, MX35_USB_OTG_BASE_ADDR, 0x200,
IORESOURCE_MEM, &usb_pdata);
#endif
armlinux_set_bootparams((void *)0x80000100);
@@ -246,70 +246,70 @@ static int eukrea_cpuimx35_core_init(void)
u32 reg;
/* enable clock for I2C1, SDHC1, USB and FEC */
- reg = readl(IMX_CCM_BASE + CCM_CGR1);
+ reg = readl(MX35_CCM_BASE_ADDR + CCM_CGR1);
reg |= 0x3 << CCM_CGR1_FEC_SHIFT;
reg |= 0x3 << CCM_CGR1_SDHC1_SHIFT;
reg |= 0x3 << CCM_CGR1_I2C1_SHIFT,
- reg = writel(reg, IMX_CCM_BASE + CCM_CGR1);
- reg = readl(IMX_CCM_BASE + CCM_CGR2);
+ reg = writel(reg, MX35_CCM_BASE_ADDR + CCM_CGR1);
+ reg = readl(MX35_CCM_BASE_ADDR + CCM_CGR2);
reg |= 0x3 << CCM_CGR2_USB_SHIFT;
- reg = writel(reg, IMX_CCM_BASE + CCM_CGR2);
+ reg = writel(reg, MX35_CCM_BASE_ADDR + CCM_CGR2);
/* AIPS setup - Only setup MPROTx registers. The PACR default values are good.*/
/*
* Set all MPROTx to be non-bufferable, trusted for R/W,
* not forced to user-mode.
*/
- writel(0x77777777, IMX_AIPS1_BASE);
- writel(0x77777777, IMX_AIPS1_BASE + 0x4);
- writel(0x77777777, IMX_AIPS2_BASE);
- writel(0x77777777, IMX_AIPS2_BASE + 0x4);
+ writel(0x77777777, MX35_AIPS1_BASE_ADDR);
+ writel(0x77777777, MX35_AIPS1_BASE_ADDR + 0x4);
+ writel(0x77777777, MX35_AIPS2_BASE_ADDR);
+ writel(0x77777777, MX35_AIPS2_BASE_ADDR + 0x4);
/*
* Clear the on and off peripheral modules Supervisor Protect bit
* for SDMA to access them. Did not change the AIPS control registers
* (offset 0x20) access type
*/
- writel(0x0, IMX_AIPS1_BASE + 0x40);
- writel(0x0, IMX_AIPS1_BASE + 0x44);
- writel(0x0, IMX_AIPS1_BASE + 0x48);
- writel(0x0, IMX_AIPS1_BASE + 0x4C);
- reg = readl(IMX_AIPS1_BASE + 0x50);
+ writel(0x0, MX35_AIPS1_BASE_ADDR + 0x40);
+ writel(0x0, MX35_AIPS1_BASE_ADDR + 0x44);
+ writel(0x0, MX35_AIPS1_BASE_ADDR + 0x48);
+ writel(0x0, MX35_AIPS1_BASE_ADDR + 0x4C);
+ reg = readl(MX35_AIPS1_BASE_ADDR + 0x50);
reg &= 0x00FFFFFF;
- writel(reg, IMX_AIPS1_BASE + 0x50);
+ writel(reg, MX35_AIPS1_BASE_ADDR + 0x50);
- writel(0x0, IMX_AIPS2_BASE + 0x40);
- writel(0x0, IMX_AIPS2_BASE + 0x44);
- writel(0x0, IMX_AIPS2_BASE + 0x48);
- writel(0x0, IMX_AIPS2_BASE + 0x4C);
- reg = readl(IMX_AIPS2_BASE + 0x50);
+ writel(0x0, MX35_AIPS2_BASE_ADDR + 0x40);
+ writel(0x0, MX35_AIPS2_BASE_ADDR + 0x44);
+ writel(0x0, MX35_AIPS2_BASE_ADDR + 0x48);
+ writel(0x0, MX35_AIPS2_BASE_ADDR + 0x4C);
+ reg = readl(MX35_AIPS2_BASE_ADDR + 0x50);
reg &= 0x00FFFFFF;
- writel(reg, IMX_AIPS2_BASE + 0x50);
+ writel(reg, MX35_AIPS2_BASE_ADDR + 0x50);
/* MAX (Multi-Layer AHB Crossbar Switch) setup */
/* MPR - priority is M4 > M2 > M3 > M5 > M0 > M1 */
#define MAX_PARAM1 0x00302154
- writel(MAX_PARAM1, IMX_MAX_BASE + 0x000); /* for S0 */
- writel(MAX_PARAM1, IMX_MAX_BASE + 0x100); /* for S1 */
- writel(MAX_PARAM1, IMX_MAX_BASE + 0x200); /* for S2 */
- writel(MAX_PARAM1, IMX_MAX_BASE + 0x300); /* for S3 */
- writel(MAX_PARAM1, IMX_MAX_BASE + 0x400); /* for S4 */
+ writel(MAX_PARAM1, MX35_MAX_BASE_ADDR + 0x000); /* for S0 */
+ writel(MAX_PARAM1, MX35_MAX_BASE_ADDR + 0x100); /* for S1 */
+ writel(MAX_PARAM1, MX35_MAX_BASE_ADDR + 0x200); /* for S2 */
+ writel(MAX_PARAM1, MX35_MAX_BASE_ADDR + 0x300); /* for S3 */
+ writel(MAX_PARAM1, MX35_MAX_BASE_ADDR + 0x400); /* for S4 */
/* SGPCR - always park on last master */
- writel(0x10, IMX_MAX_BASE + 0x10); /* for S0 */
- writel(0x10, IMX_MAX_BASE + 0x110); /* for S1 */
- writel(0x10, IMX_MAX_BASE + 0x210); /* for S2 */
- writel(0x10, IMX_MAX_BASE + 0x310); /* for S3 */
- writel(0x10, IMX_MAX_BASE + 0x410); /* for S4 */
+ writel(0x10, MX35_MAX_BASE_ADDR + 0x10); /* for S0 */
+ writel(0x10, MX35_MAX_BASE_ADDR + 0x110); /* for S1 */
+ writel(0x10, MX35_MAX_BASE_ADDR + 0x210); /* for S2 */
+ writel(0x10, MX35_MAX_BASE_ADDR + 0x310); /* for S3 */
+ writel(0x10, MX35_MAX_BASE_ADDR + 0x410); /* for S4 */
/* MGPCR - restore default values */
- writel(0x0, IMX_MAX_BASE + 0x800); /* for M0 */
- writel(0x0, IMX_MAX_BASE + 0x900); /* for M1 */
- writel(0x0, IMX_MAX_BASE + 0xa00); /* for M2 */
- writel(0x0, IMX_MAX_BASE + 0xb00); /* for M3 */
- writel(0x0, IMX_MAX_BASE + 0xc00); /* for M4 */
- writel(0x0, IMX_MAX_BASE + 0xd00); /* for M5 */
+ writel(0x0, MX35_MAX_BASE_ADDR + 0x800); /* for M0 */
+ writel(0x0, MX35_MAX_BASE_ADDR + 0x900); /* for M1 */
+ writel(0x0, MX35_MAX_BASE_ADDR + 0xa00); /* for M2 */
+ writel(0x0, MX35_MAX_BASE_ADDR + 0xb00); /* for M3 */
+ writel(0x0, MX35_MAX_BASE_ADDR + 0xc00); /* for M4 */
+ writel(0x0, MX35_MAX_BASE_ADDR + 0xd00); /* for M5 */
/*
* M3IF Control Register (M3IFCTL)
@@ -324,7 +324,7 @@ static int eukrea_cpuimx35_core_init(void)
* ------------
* 0x00000040
*/
- writel(0x40, IMX_M3IF_BASE);
+ writel(0x40, MX35_M3IF_BASE_ADDR);
return 0;
}
@@ -345,10 +345,10 @@ static int do_cpufreq(int argc, char *argv[])
switch (freq) {
case 399:
- writel(MPCTL_PARAM_399, IMX_CCM_BASE + CCM_MPCTL);
+ writel(MPCTL_PARAM_399, MX35_CCM_BASE_ADDR + CCM_MPCTL);
break;
case 532:
- writel(MPCTL_PARAM_532, IMX_CCM_BASE + CCM_MPCTL);
+ writel(MPCTL_PARAM_532, MX35_CCM_BASE_ADDR + CCM_MPCTL);
break;
default:
return COMMAND_ERROR_USAGE;
diff --git a/arch/arm/boards/eukrea_cpuimx35/lowlevel.c b/arch/arm/boards/eukrea_cpuimx35/lowlevel.c
index 2721cf2ff0..ea932f773e 100644
--- a/arch/arm/boards/eukrea_cpuimx35/lowlevel.c
+++ b/arch/arm/boards/eukrea_cpuimx35/lowlevel.c
@@ -41,10 +41,10 @@ static void __bare_init __naked insdram(void)
uint32_t r;
/* Speed up NAND controller by adjusting the NFC divider */
- r = readl(IMX_CCM_BASE + CCM_PDR4);
+ r = readl(MX35_CCM_BASE_ADDR + CCM_PDR4);
r &= ~(0xf << 28);
r |= 0x1 << 28;
- writel(r, IMX_CCM_BASE + CCM_PDR4);
+ writel(r, MX35_CCM_BASE_ADDR + CCM_PDR4);
/* setup a stack to be able to call imx_nand_load_image() */
r = STACK_BASE + STACK_SIZE - 12;
@@ -59,7 +59,7 @@ static void __bare_init __naked insdram(void)
void __bare_init __naked reset(void)
{
uint32_t r, s;
- unsigned long ccm_base = IMX_CCM_BASE;
+ unsigned long ccm_base = MX35_CCM_BASE_ADDR;
#ifdef CONFIG_NAND_IMX_BOOT
unsigned int *trg, *src;
int i;
@@ -128,9 +128,9 @@ void __bare_init __naked reset(void)
r |= 0x03000000;
writel(r, ccm_base + CCM_CGR2);
- r = readl(IMX_L2CC_BASE + L2X0_AUX_CTRL);
+ r = readl(MX35_L2CC_BASE_ADDR + L2X0_AUX_CTRL);
r |= 0x1000;
- writel(r, IMX_L2CC_BASE + L2X0_AUX_CTRL);
+ writel(r, MX35_L2CC_BASE_ADDR + L2X0_AUX_CTRL);
/* Skip SDRAM initialization if we run from RAM */
r = get_pc();
@@ -146,22 +146,22 @@ void __bare_init __naked reset(void)
writel(0x0009572B, ESDCFG0);
writel(0x92220000, ESDCTL0);
- writeb(0xda, IMX_SDRAM_CS0 + 0x400);
+ writeb(0xda, MX35_CSD0_BASE_ADDR + 0x400);
writel(0xA2220000, ESDCTL0);
- writeb(0xda, IMX_SDRAM_CS0);
- writeb(0xda, IMX_SDRAM_CS0);
+ writeb(0xda, MX35_CSD0_BASE_ADDR);
+ writeb(0xda, MX35_CSD0_BASE_ADDR);
writel(0xB2220000, ESDCTL0);
- writeb(0xda, IMX_SDRAM_CS0 + 0x33);
- writeb(0xda, IMX_SDRAM_CS0 + 0x2000000);
+ writeb(0xda, MX35_CSD0_BASE_ADDR + 0x33);
+ writeb(0xda, MX35_CSD0_BASE_ADDR + 0x2000000);
writel(0x82228080, ESDCTL0);
#ifdef CONFIG_NAND_IMX_BOOT
/* skip NAND boot if not running from NFC space */
r = get_pc();
- if (r < IMX_NFC_BASE || r > IMX_NFC_BASE + 0x800)
+ if (r < MX35_NFC_BASE_ADDR || r > MX35_NFC_BASE_ADDR + 0x800)
board_init_lowlevel_return();
- src = (unsigned int *)IMX_NFC_BASE;
+ src = (unsigned int *)MX35_NFC_BASE_ADDR;
trg = (unsigned int *)_text;
/* Move ourselves out of NFC SRAM */
diff --git a/arch/arm/boards/freescale-mx35-3-stack/3stack.c b/arch/arm/boards/freescale-mx35-3-stack/3stack.c
index 199841f468..3d4a9cfa16 100644
--- a/arch/arm/boards/freescale-mx35-3-stack/3stack.c
+++ b/arch/arm/boards/freescale-mx35-3-stack/3stack.c
@@ -128,8 +128,8 @@ static void set_board_rev(int rev)
static int f3s_mem_init(void)
{
- arm_add_mem_device("ram0", IMX_SDRAM_CS0, 128 * 1024 * 1024);
- arm_add_mem_device("ram1", IMX_SDRAM_CS1, 128 * 1024 * 1024);
+ arm_add_mem_device("ram0", MX35_CSD0_BASE_ADDR, 128 * 1024 * 1024);
+ arm_add_mem_device("ram1", MX35_CSD1_BASE_ADDR, 128 * 1024 * 1024);
return 0;
}
@@ -144,7 +144,7 @@ static int f3s_devices_init(void)
writel(0x10000d03, CSCR_L(0));
writel(0x00720900, CSCR_A(0));
- reg = readl(IMX_CCM_BASE + CCM_RCSR);
+ reg = readl(MX35_CCM_BASE_ADDR + CCM_RCSR);
/* some fuses provide us vital information about connected hardware */
if (reg & 0x20000000)
nand_info.width = 2; /* 16 bit */
@@ -155,7 +155,7 @@ static int f3s_devices_init(void)
* This platform supports NOR and NAND
*/
imx35_add_nand(&nand_info);
- add_cfi_flash_device(DEVICE_ID_DYNAMIC, IMX_CS0_BASE, 64 * 1024 * 1024, 0);
+ add_cfi_flash_device(DEVICE_ID_DYNAMIC, MX35_CS0_BASE_ADDR, 64 * 1024 * 1024, 0);
switch ((reg >> 25) & 0x3) {
case 0x01: /* NAND is the source */
@@ -178,7 +178,7 @@ static int f3s_devices_init(void)
imx35_add_i2c0(NULL);
imx35_add_fec(&fec_info);
- add_generic_device("smc911x", DEVICE_ID_DYNAMIC, NULL, IMX_CS5_BASE, IMX_CS5_RANGE,
+ add_generic_device("smc911x", DEVICE_ID_DYNAMIC, NULL, MX35_CS5_BASE_ADDR, MX35_CS5_SIZE,
IORESOURCE_MEM, NULL);
imx35_add_mmc0(NULL);
@@ -283,66 +283,66 @@ static int f3s_core_init(void)
writel(0x22220A00, CSCR_A(5));
/* enable clock for I2C1 and FEC */
- reg = readl(IMX_CCM_BASE + CCM_CGR1);
+ reg = readl(MX35_CCM_BASE_ADDR + CCM_CGR1);
reg |= 0x3 << CCM_CGR1_FEC_SHIFT;
reg |= 0x3 << CCM_CGR1_I2C1_SHIFT;
- reg = writel(reg, IMX_CCM_BASE + CCM_CGR1);
+ reg = writel(reg, MX35_CCM_BASE_ADDR + CCM_CGR1);
/* AIPS setup - Only setup MPROTx registers. The PACR default values are good.*/
/*
* Set all MPROTx to be non-bufferable, trusted for R/W,
* not forced to user-mode.
*/
- writel(0x77777777, IMX_AIPS1_BASE);
- writel(0x77777777, IMX_AIPS1_BASE + 0x4);
- writel(0x77777777, IMX_AIPS2_BASE);
- writel(0x77777777, IMX_AIPS2_BASE + 0x4);
+ writel(0x77777777, MX35_AIPS1_BASE_ADDR);
+ writel(0x77777777, MX35_AIPS1_BASE_ADDR + 0x4);
+ writel(0x77777777, MX35_AIPS2_BASE_ADDR);
+ writel(0x77777777, MX35_AIPS2_BASE_ADDR + 0x4);
/*
* Clear the on and off peripheral modules Supervisor Protect bit
* for SDMA to access them. Did not change the AIPS control registers
* (offset 0x20) access type
*/
- writel(0x0, IMX_AIPS1_BASE + 0x40);
- writel(0x0, IMX_AIPS1_BASE + 0x44);
- writel(0x0, IMX_AIPS1_BASE + 0x48);
- writel(0x0, IMX_AIPS1_BASE + 0x4C);
- reg = readl(IMX_AIPS1_BASE + 0x50);
+ writel(0x0, MX35_AIPS1_BASE_ADDR + 0x40);
+ writel(0x0, MX35_AIPS1_BASE_ADDR + 0x44);
+ writel(0x0, MX35_AIPS1_BASE_ADDR + 0x48);
+ writel(0x0, MX35_AIPS1_BASE_ADDR + 0x4C);
+ reg = readl(MX35_AIPS1_BASE_ADDR + 0x50);
reg &= 0x00FFFFFF;
- writel(reg, IMX_AIPS1_BASE + 0x50);
+ writel(reg, MX35_AIPS1_BASE_ADDR + 0x50);
- writel(0x0, IMX_AIPS2_BASE + 0x40);
- writel(0x0, IMX_AIPS2_BASE + 0x44);
- writel(0x0, IMX_AIPS2_BASE + 0x48);
- writel(0x0, IMX_AIPS2_BASE + 0x4C);
- reg = readl(IMX_AIPS2_BASE + 0x50);
+ writel(0x0, MX35_AIPS2_BASE_ADDR + 0x40);
+ writel(0x0, MX35_AIPS2_BASE_ADDR + 0x44);
+ writel(0x0, MX35_AIPS2_BASE_ADDR + 0x48);
+ writel(0x0, MX35_AIPS2_BASE_ADDR + 0x4C);
+ reg = readl(MX35_AIPS2_BASE_ADDR + 0x50);
reg &= 0x00FFFFFF;
- writel(reg, IMX_AIPS2_BASE + 0x50);
+ writel(reg, MX35_AIPS2_BASE_ADDR + 0x50);
/* MAX (Multi-Layer AHB Crossbar Switch) setup */
/* MPR - priority is M4 > M2 > M3 > M5 > M0 > M1 */
#define MAX_PARAM1 0x00302154
- writel(MAX_PARAM1, IMX_MAX_BASE + 0x000); /* for S0 */
- writel(MAX_PARAM1, IMX_MAX_BASE + 0x100); /* for S1 */
- writel(MAX_PARAM1, IMX_MAX_BASE + 0x200); /* for S2 */
- writel(MAX_PARAM1, IMX_MAX_BASE + 0x300); /* for S3 */
- writel(MAX_PARAM1, IMX_MAX_BASE + 0x400); /* for S4 */
+ writel(MAX_PARAM1, MX35_MAX_BASE_ADDR + 0x000); /* for S0 */
+ writel(MAX_PARAM1, MX35_MAX_BASE_ADDR + 0x100); /* for S1 */
+ writel(MAX_PARAM1, MX35_MAX_BASE_ADDR + 0x200); /* for S2 */
+ writel(MAX_PARAM1, MX35_MAX_BASE_ADDR + 0x300); /* for S3 */
+ writel(MAX_PARAM1, MX35_MAX_BASE_ADDR + 0x400); /* for S4 */
/* SGPCR - always park on last master */
- writel(0x10, IMX_MAX_BASE + 0x10); /* for S0 */
- writel(0x10, IMX_MAX_BASE + 0x110); /* for S1 */
- writel(0x10, IMX_MAX_BASE + 0x210); /* for S2 */
- writel(0x10, IMX_MAX_BASE + 0x310); /* for S3 */
- writel(0x10, IMX_MAX_BASE + 0x410); /* for S4 */
+ writel(0x10, MX35_MAX_BASE_ADDR + 0x10); /* for S0 */
+ writel(0x10, MX35_MAX_BASE_ADDR + 0x110); /* for S1 */
+ writel(0x10, MX35_MAX_BASE_ADDR + 0x210); /* for S2 */
+ writel(0x10, MX35_MAX_BASE_ADDR + 0x310); /* for S3 */
+ writel(0x10, MX35_MAX_BASE_ADDR + 0x410); /* for S4 */
/* MGPCR - restore default values */
- writel(0x0, IMX_MAX_BASE + 0x800); /* for M0 */
- writel(0x0, IMX_MAX_BASE + 0x900); /* for M1 */
- writel(0x0, IMX_MAX_BASE + 0xa00); /* for M2 */
- writel(0x0, IMX_MAX_BASE + 0xb00); /* for M3 */
- writel(0x0, IMX_MAX_BASE + 0xc00); /* for M4 */
- writel(0x0, IMX_MAX_BASE + 0xd00); /* for M5 */
+ writel(0x0, MX35_MAX_BASE_ADDR + 0x800); /* for M0 */
+ writel(0x0, MX35_MAX_BASE_ADDR + 0x900); /* for M1 */
+ writel(0x0, MX35_MAX_BASE_ADDR + 0xa00); /* for M2 */
+ writel(0x0, MX35_MAX_BASE_ADDR + 0xb00); /* for M3 */
+ writel(0x0, MX35_MAX_BASE_ADDR + 0xc00); /* for M4 */
+ writel(0x0, MX35_MAX_BASE_ADDR + 0xd00); /* for M5 */
return 0;
}
diff --git a/arch/arm/boards/freescale-mx35-3-stack/lowlevel_init.S b/arch/arm/boards/freescale-mx35-3-stack/lowlevel_init.S
index 0718fc610c..e5d0feb18f 100644
--- a/arch/arm/boards/freescale-mx35-3-stack/lowlevel_init.S
+++ b/arch/arm/boards/freescale-mx35-3-stack/lowlevel_init.S
@@ -54,7 +54,7 @@ CCM_PDR0_W: .word 0x00001000
MPCTL_PARAM_399_W: .word MPCTL_PARAM_399
MPCTL_PARAM_532_W: .word MPCTL_PARAM_532
PPCTL_PARAM_W: .word PPCTL_PARAM_300
-CCM_BASE_ADDR_W: .word IMX_CCM_BASE
+CCM_BASE_ADDR_W: .word MX35_CCM_BASE_ADDR
.globl reset
reset:
@@ -157,8 +157,8 @@ reset:
#ifdef CONFIG_NAND_IMX_BOOT
ldr sp, =STACK_BASE + STACK_SIZE - 12 /* Setup a temporary stack in SDRAM */
- ldr r0, =IMX_NFC_BASE /* start of NFC SRAM */
- ldr r2, =IMX_NFC_BASE + 0x800 /* end of NFC SRAM */
+ ldr r0, =MX35_NFC_BASE_ADDR /* start of NFC SRAM */
+ ldr r2, =MX35_NFC_BASE_ADDR + 0x800 /* end of NFC SRAM */
/* skip NAND boot if not running from NFC space */
cmp pc, r0
diff --git a/arch/arm/boards/guf-cupid/board.c b/arch/arm/boards/guf-cupid/board.c
index d5f2291ff3..977d71c195 100644
--- a/arch/arm/boards/guf-cupid/board.c
+++ b/arch/arm/boards/guf-cupid/board.c
@@ -95,7 +95,7 @@ static struct imx_ipu_fb_platform_data ipu_fb_data = {
static int cupid_mem_init(void)
{
- arm_add_mem_device("ram0", IMX_SDRAM_CS0, 128 * 1024 * 1024);
+ arm_add_mem_device("ram0", MX35_CSD0_BASE_ADDR, 128 * 1024 * 1024);
return 0;
}
@@ -116,7 +116,7 @@ static int cupid_devices_init(void)
gpio_direction_output(GPIO_LCD_ENABLE, 0);
gpio_direction_output(GPIO_LCD_BACKLIGHT, 0);
- reg = readl(IMX_CCM_BASE + CCM_RCSR);
+ reg = readl(MX35_CCM_BASE_ADDR + CCM_RCSR);
/* some fuses provide us vital information about connected hardware */
if (reg & 0x20000000)
nand_info.width = 2; /* 16 bit */
@@ -250,56 +250,56 @@ static int cupid_core_setup(void)
* Set all MPROTx to be non-bufferable, trusted for R/W,
* not forced to user-mode.
*/
- writel(0x77777777, IMX_AIPS1_BASE);
- writel(0x77777777, IMX_AIPS1_BASE + 0x4);
- writel(0x77777777, IMX_AIPS2_BASE);
- writel(0x77777777, IMX_AIPS2_BASE + 0x4);
+ writel(0x77777777, MX35_AIPS1_BASE_ADDR);
+ writel(0x77777777, MX35_AIPS1_BASE_ADDR + 0x4);
+ writel(0x77777777, MX35_AIPS2_BASE_ADDR);
+ writel(0x77777777, MX35_AIPS2_BASE_ADDR + 0x4);
/*
* Clear the on and off peripheral modules Supervisor Protect bit
* for SDMA to access them. Did not change the AIPS control registers
* (offset 0x20) access type
*/
- writel(0x0, IMX_AIPS1_BASE + 0x40);
- writel(0x0, IMX_AIPS1_BASE + 0x44);
- writel(0x0, IMX_AIPS1_BASE + 0x48);
- writel(0x0, IMX_AIPS1_BASE + 0x4C);
- tmp = readl(IMX_AIPS1_BASE + 0x50);
+ writel(0x0, MX35_AIPS1_BASE_ADDR + 0x40);
+ writel(0x0, MX35_AIPS1_BASE_ADDR + 0x44);
+ writel(0x0, MX35_AIPS1_BASE_ADDR + 0x48);
+ writel(0x0, MX35_AIPS1_BASE_ADDR + 0x4C);
+ tmp = readl(MX35_AIPS1_BASE_ADDR + 0x50);
tmp &= 0x00FFFFFF;
- writel(tmp, IMX_AIPS1_BASE + 0x50);
+ writel(tmp, MX35_AIPS1_BASE_ADDR + 0x50);
- writel(0x0, IMX_AIPS2_BASE + 0x40);
- writel(0x0, IMX_AIPS2_BASE + 0x44);
- writel(0x0, IMX_AIPS2_BASE + 0x48);
- writel(0x0, IMX_AIPS2_BASE + 0x4C);
- tmp = readl(IMX_AIPS2_BASE + 0x50);
+ writel(0x0, MX35_AIPS2_BASE_ADDR + 0x40);
+ writel(0x0, MX35_AIPS2_BASE_ADDR + 0x44);
+ writel(0x0, MX35_AIPS2_BASE_ADDR + 0x48);
+ writel(0x0, MX35_AIPS2_BASE_ADDR + 0x4C);
+ tmp = readl(MX35_AIPS2_BASE_ADDR + 0x50);
tmp &= 0x00FFFFFF;
- writel(tmp, IMX_AIPS2_BASE + 0x50);
+ writel(tmp, MX35_AIPS2_BASE_ADDR + 0x50);
/* MAX (Multi-Layer AHB Crossbar Switch) setup */
/* MPR - priority is M4 > M2 > M3 > M5 > M0 > M1 */
#define MAX_PARAM1 0x00302154
- writel(MAX_PARAM1, IMX_MAX_BASE + 0x0); /* for S0 */
- writel(MAX_PARAM1, IMX_MAX_BASE + 0x100); /* for S1 */
- writel(MAX_PARAM1, IMX_MAX_BASE + 0x200); /* for S2 */
- writel(MAX_PARAM1, IMX_MAX_BASE + 0x300); /* for S3 */
- writel(MAX_PARAM1, IMX_MAX_BASE + 0x400); /* for S4 */
+ writel(MAX_PARAM1, MX35_MAX_BASE_ADDR + 0x0); /* for S0 */
+ writel(MAX_PARAM1, MX35_MAX_BASE_ADDR + 0x100); /* for S1 */
+ writel(MAX_PARAM1, MX35_MAX_BASE_ADDR + 0x200); /* for S2 */
+ writel(MAX_PARAM1, MX35_MAX_BASE_ADDR + 0x300); /* for S3 */
+ writel(MAX_PARAM1, MX35_MAX_BASE_ADDR + 0x400); /* for S4 */
/* SGPCR - always park on last master */
- writel(0x10, IMX_MAX_BASE + 0x10); /* for S0 */
- writel(0x10, IMX_MAX_BASE + 0x110); /* for S1 */
- writel(0x10, IMX_MAX_BASE + 0x210); /* for S2 */
- writel(0x10, IMX_MAX_BASE + 0x310); /* for S3 */
- writel(0x10, IMX_MAX_BASE + 0x410); /* for S4 */
+ writel(0x10, MX35_MAX_BASE_ADDR + 0x10); /* for S0 */
+ writel(0x10, MX35_MAX_BASE_ADDR + 0x110); /* for S1 */
+ writel(0x10, MX35_MAX_BASE_ADDR + 0x210); /* for S2 */
+ writel(0x10, MX35_MAX_BASE_ADDR + 0x310); /* for S3 */
+ writel(0x10, MX35_MAX_BASE_ADDR + 0x410); /* for S4 */
/* MGPCR - restore default values */
- writel(0x0, IMX_MAX_BASE + 0x800); /* for M0 */
- writel(0x0, IMX_MAX_BASE + 0x900); /* for M1 */
- writel(0x0, IMX_MAX_BASE + 0xa00); /* for M2 */
- writel(0x0, IMX_MAX_BASE + 0xb00); /* for M3 */
- writel(0x0, IMX_MAX_BASE + 0xc00); /* for M4 */
- writel(0x0, IMX_MAX_BASE + 0xd00); /* for M5 */
+ writel(0x0, MX35_MAX_BASE_ADDR + 0x800); /* for M0 */
+ writel(0x0, MX35_MAX_BASE_ADDR + 0x900); /* for M1 */
+ writel(0x0, MX35_MAX_BASE_ADDR + 0xa00); /* for M2 */
+ writel(0x0, MX35_MAX_BASE_ADDR + 0xb00); /* for M3 */
+ writel(0x0, MX35_MAX_BASE_ADDR + 0xc00); /* for M4 */
+ writel(0x0, MX35_MAX_BASE_ADDR + 0xd00); /* for M5 */
writel(0x0000DCF6, CSCR_U(0)); /* CS0: NOR Flash */
writel(0x444A4541, CSCR_L(0));
@@ -318,7 +318,7 @@ static int cupid_core_setup(void)
* ------------
* 0x00000040
*/
- writel(0x40, IMX_M3IF_BASE);
+ writel(0x40, MX35_M3IF_BASE_ADDR);
return 0;
}
@@ -339,10 +339,10 @@ static int do_cpufreq(int argc, char *argv[])
switch (freq) {
case 399:
- writel(MPCTL_PARAM_399, IMX_CCM_BASE + CCM_MPCTL);
+ writel(MPCTL_PARAM_399, MX35_CCM_BASE_ADDR + CCM_MPCTL);
break;
case 532:
- writel(MPCTL_PARAM_532, IMX_CCM_BASE + CCM_MPCTL);
+ writel(MPCTL_PARAM_532, MX35_CCM_BASE_ADDR + CCM_MPCTL);
break;
default:
return COMMAND_ERROR_USAGE;
diff --git a/arch/arm/boards/guf-cupid/lowlevel.c b/arch/arm/boards/guf-cupid/lowlevel.c
index 677ff95626..d451fd9393 100644
--- a/arch/arm/boards/guf-cupid/lowlevel.c
+++ b/arch/arm/boards/guf-cupid/lowlevel.c
@@ -48,10 +48,10 @@ static void __bare_init __naked insdram(void)
uint32_t r;
/* Speed up NAND controller by adjusting the NFC divider */
- r = readl(IMX_CCM_BASE + CCM_PDR4);
+ r = readl(MX35_CCM_BASE_ADDR + CCM_PDR4);
r &= ~(0xf << 28);
r |= 0x1 << 28;
- writel(r, IMX_CCM_BASE + CCM_PDR4);
+ writel(r, MX35_CCM_BASE_ADDR + CCM_PDR4);
/* setup a stack to be able to call imx_nand_load_image() */
r = STACK_BASE + STACK_SIZE - 12;
@@ -66,7 +66,7 @@ static void __bare_init __naked insdram(void)
static void __bare_init noinline setup_sdram(u32 memsize, u32 mode, u32 sdram_addr)
{
volatile int loop;
- void *r9 = (void *)IMX_SDRAM_CS0;
+ void *r9 = (void *)MX35_CSD0_BASE_ADDR;
u32 r11 = 0xda; /* dummy constant */
u32 r1, r0;
@@ -249,7 +249,7 @@ void __bare_init __naked reset(void)
#define WDOG_WMCR 0x8
/* silence reset WDOG */
- writew(0, IMX_WDOG_BASE + WDOG_WMCR);
+ writew(0, MX35_WDOG_BASE_ADDR + WDOG_WMCR);
/* Skip SDRAM initialization if we run from RAM */
r0 = get_pc();
@@ -299,27 +299,27 @@ void __bare_init __naked reset(void)
/* Configure clocks */
/* setup cpu/bus clocks */
- writel(0x003f4208, IMX_CCM_BASE + CCM_CCMR);
+ writel(0x003f4208, MX35_CCM_BASE_ADDR + CCM_CCMR);
/* configure MPLL */
- writel(MPCTL_PARAM_532, IMX_CCM_BASE + CCM_MPCTL);
+ writel(MPCTL_PARAM_532, MX35_CCM_BASE_ADDR + CCM_MPCTL);
/* configure PPLL */
- writel(PPCTL_PARAM_300, IMX_CCM_BASE + CCM_PPCTL);
+ writel(PPCTL_PARAM_300, MX35_CCM_BASE_ADDR + CCM_PPCTL);
/* configure core dividers */
r0 = PDR0_CCM_PER_AHB(1) | PDR0_HSP_PODF(2);
- writel(r0, IMX_CCM_BASE + CCM_PDR0);
+ writel(r0, MX35_CCM_BASE_ADDR + CCM_PDR0);
/* configure clock-gates */
- r0 = readl(IMX_CCM_BASE + CCM_CGR0);
+ r0 = readl(MX35_CCM_BASE_ADDR + CCM_CGR0);
r0 |= 0x00300000;
- writel(r0, IMX_CCM_BASE + CCM_CGR0);
+ writel(r0, MX35_CCM_BASE_ADDR + CCM_CGR0);
- r0 = readl(IMX_CCM_BASE + CCM_CGR1);
+ r0 = readl(MX35_CCM_BASE_ADDR + CCM_CGR1);
r0 |= 0x00000c03;
- writel(r0, IMX_CCM_BASE + CCM_CGR1);
+ writel(r0, MX35_CCM_BASE_ADDR + CCM_CGR1);
/* Configure SDRAM */
/* Try 32-Bit 256 MB DDR memory */
@@ -329,10 +329,10 @@ void __bare_init __naked reset(void)
#ifdef CONFIG_NAND_IMX_BOOT
/* skip NAND boot if not running from NFC space */
r0 = get_pc();
- if (r0 < IMX_NFC_BASE || r0 > IMX_NFC_BASE + 0x800)
+ if (r0 < MX35_NFC_BASE_ADDR || r0 > MX35_NFC_BASE_ADDR + 0x800)
board_init_lowlevel_return();
- src = (unsigned int *)IMX_NFC_BASE;
+ src = (unsigned int *)MX35_NFC_BASE_ADDR;
trg = (unsigned int *)_text;
/* Move ourselves out of NFC SRAM */
diff --git a/arch/arm/boards/pcm043/lowlevel.c b/arch/arm/boards/pcm043/lowlevel.c
index 8c52b8c7b0..4516e9f017 100644
--- a/arch/arm/boards/pcm043/lowlevel.c
+++ b/arch/arm/boards/pcm043/lowlevel.c
@@ -46,10 +46,10 @@ static void __bare_init __naked insdram(void)
uint32_t r;
/* Speed up NAND controller by adjusting the NFC divider */
- r = readl(IMX_CCM_BASE + CCM_PDR4);
+ r = readl(MX35_CCM_BASE_ADDR + CCM_PDR4);
r &= ~(0xf << 28);
r |= 0x1 << 28;
- writel(r, IMX_CCM_BASE + CCM_PDR4);
+ writel(r, MX35_CCM_BASE_ADDR + CCM_PDR4);
/* setup a stack to be able to call imx_nand_load_image() */
r = STACK_BASE + STACK_SIZE - 12;
@@ -64,8 +64,8 @@ static void __bare_init __naked insdram(void)
void __bare_init __naked reset(void)
{
uint32_t r, s;
- unsigned long ccm_base = IMX_CCM_BASE;
- unsigned long iomuxc_base = IMX_IOMUXC_BASE;
+ unsigned long ccm_base = MX35_CCM_BASE_ADDR;
+ unsigned long iomuxc_base = MX35_IOMUXC_BASE_ADDR;
#ifdef CONFIG_NAND_IMX_BOOT
unsigned int *trg, *src;
int i;
@@ -118,7 +118,7 @@ void __bare_init __naked reset(void)
writel(PPCTL_PARAM_300, ccm_base + CCM_PPCTL);
/* Check silicon revision and use 532MHz if >=2.1 */
- r = readl(IMX_IIM_BASE + 0x24);
+ r = readl(MX35_IIM_BASE_ADDR + 0x24);
if (r >= IMX35_CHIP_REVISION_2_1)
writel(CCM_PDR0_532, ccm_base + CCM_PDR0);
else
@@ -133,9 +133,9 @@ void __bare_init __naked reset(void)
r |= 0x00000003;
writel(r, ccm_base + CCM_CGR1);
- r = readl(IMX_L2CC_BASE + L2X0_AUX_CTRL);
+ r = readl(MX35_L2CC_BASE_ADDR + L2X0_AUX_CTRL);
r |= 0x1000;
- writel(r, IMX_L2CC_BASE + L2X0_AUX_CTRL);
+ writel(r, MX35_L2CC_BASE_ADDR + L2X0_AUX_CTRL);
/* Skip SDRAM initialization if we run from RAM */
r = get_pc();
@@ -161,7 +161,7 @@ void __bare_init __naked reset(void)
/* select Precharge-All mode */
writel(0x92220000, ESDCTL0);
/* Precharge-All */
- writel(0x12345678, IMX_SDRAM_CS0 + 0x400);
+ writel(0x12345678, MX35_CSD0_BASE_ADDR + 0x400);
/* select Load-Mode-Register mode */
writel(0xB8001000, ESDCTL0);
@@ -177,13 +177,13 @@ void __bare_init __naked reset(void)
/* select Precharge-All mode */
writel(0x92220000, ESDCTL0);
/* Precharge-All */
- writel(0x12345678, IMX_SDRAM_CS0 + 0x400);
+ writel(0x12345678, MX35_CSD0_BASE_ADDR + 0x400);
/* select Manual-Refresh mode */
writel(0xA2220000, ESDCTL0);
/* Manual-Refresh 2 times */
- writel(0x87654321, IMX_SDRAM_CS0);
- writel(0x87654321, IMX_SDRAM_CS0);
+ writel(0x87654321, MX35_CSD0_BASE_ADDR);
+ writel(0x87654321, MX35_CSD0_BASE_ADDR);
/* select Load-Mode-Register mode */
writel(0xB2220000, ESDCTL0);
@@ -208,10 +208,10 @@ void __bare_init __naked reset(void)
#ifdef CONFIG_NAND_IMX_BOOT
/* skip NAND boot if not running from NFC space */
r = get_pc();
- if (r < IMX_NFC_BASE || r > IMX_NFC_BASE + 0x800)
+ if (r < MX35_NFC_BASE_ADDR || r > MX35_NFC_BASE_ADDR + 0x800)
board_init_lowlevel_return();
- src = (unsigned int *)IMX_NFC_BASE;
+ src = (unsigned int *)MX35_NFC_BASE_ADDR;
trg = (unsigned int *)_text;
/* Move ourselves out of NFC SRAM */
diff --git a/arch/arm/boards/pcm043/pcm043.c b/arch/arm/boards/pcm043/pcm043.c
index 3170161cfd..3b4ec77e36 100644
--- a/arch/arm/boards/pcm043/pcm043.c
+++ b/arch/arm/boards/pcm043/pcm043.c
@@ -93,13 +93,13 @@ static struct fb_videomode pcm043_fb_mode[] = {
static struct imx_ipu_fb_platform_data ipu_fb_data = {
.mode = pcm043_fb_mode,
.num_modes = ARRAY_SIZE(pcm043_fb_mode),
- .framebuffer_ovl = (void *) (IMX_SDRAM_CS0 + SZ_128M - SZ_1M),
+ .framebuffer_ovl = (void *) (MX35_CSD0_BASE_ADDR + SZ_128M - SZ_1M),
.bpp = 16,
};
static int pcm043_mem_init(void)
{
- arm_add_mem_device("ram0", IMX_SDRAM_CS0, SZ_128M);
+ arm_add_mem_device("ram0", MX35_CSD0_BASE_ADDR, SZ_128M);
return 0;
}
@@ -128,7 +128,7 @@ static int imx35_devices_init(void)
led_gpio_register(&led0);
- reg = readl(IMX_CCM_BASE + CCM_RCSR);
+ reg = readl(MX35_CCM_BASE_ADDR + CCM_RCSR);
/* some fuses provide us vital information about connected hardware */
if (reg & 0x20000000)
nand_info.width = 2; /* 16 bit */
@@ -144,7 +144,7 @@ static int imx35_devices_init(void)
* Up to 32MiB NOR type flash, connected to
* CS line 0, data width is 16 bit
*/
- add_cfi_flash_device(DEVICE_ID_DYNAMIC, IMX_CS0_BASE, 32 * 1024 * 1024, 0);
+ add_cfi_flash_device(DEVICE_ID_DYNAMIC, MX35_CS0_BASE_ADDR, 32 * 1024 * 1024, 0);
if ((reg & 0xc00) == 0x800) { /* reset mode: external boot */
switch ( (reg >> 25) & 0x3) {
@@ -224,56 +224,56 @@ static int pcm043_core_setup(void)
* Set all MPROTx to be non-bufferable, trusted for R/W,
* not forced to user-mode.
*/
- writel(0x77777777, IMX_AIPS1_BASE);
- writel(0x77777777, IMX_AIPS1_BASE + 0x4);
- writel(0x77777777, IMX_AIPS2_BASE);
- writel(0x77777777, IMX_AIPS2_BASE + 0x4);
+ writel(0x77777777, MX35_AIPS1_BASE_ADDR);
+ writel(0x77777777, MX35_AIPS1_BASE_ADDR + 0x4);
+ writel(0x77777777, MX35_AIPS2_BASE_ADDR);
+ writel(0x77777777, MX35_AIPS2_BASE_ADDR + 0x4);
/*
* Clear the on and off peripheral modules Supervisor Protect bit
* for SDMA to access them. Did not change the AIPS control registers
* (offset 0x20) access type
*/
- writel(0x0, IMX_AIPS1_BASE + 0x40);
- writel(0x0, IMX_AIPS1_BASE + 0x44);
- writel(0x0, IMX_AIPS1_BASE + 0x48);
- writel(0x0, IMX_AIPS1_BASE + 0x4C);
- tmp = readl(IMX_AIPS1_BASE + 0x50);
+ writel(0x0, MX35_AIPS1_BASE_ADDR + 0x40);
+ writel(0x0, MX35_AIPS1_BASE_ADDR + 0x44);
+ writel(0x0, MX35_AIPS1_BASE_ADDR + 0x48);
+ writel(0x0, MX35_AIPS1_BASE_ADDR + 0x4C);
+ tmp = readl(MX35_AIPS1_BASE_ADDR + 0x50);
tmp &= 0x00FFFFFF;
- writel(tmp, IMX_AIPS1_BASE + 0x50);
+ writel(tmp, MX35_AIPS1_BASE_ADDR + 0x50);
- writel(0x0, IMX_AIPS2_BASE + 0x40);
- writel(0x0, IMX_AIPS2_BASE + 0x44);
- writel(0x0, IMX_AIPS2_BASE + 0x48);
- writel(0x0, IMX_AIPS2_BASE + 0x4C);
- tmp = readl(IMX_AIPS2_BASE + 0x50);
+ writel(0x0, MX35_AIPS2_BASE_ADDR + 0x40);
+ writel(0x0, MX35_AIPS2_BASE_ADDR + 0x44);
+ writel(0x0, MX35_AIPS2_BASE_ADDR + 0x48);
+ writel(0x0, MX35_AIPS2_BASE_ADDR + 0x4C);
+ tmp = readl(MX35_AIPS2_BASE_ADDR + 0x50);
tmp &= 0x00FFFFFF;
- writel(tmp, IMX_AIPS2_BASE + 0x50);
+ writel(tmp, MX35_AIPS2_BASE_ADDR + 0x50);
/* MAX (Multi-Layer AHB Crossbar Switch) setup */
/* MPR - priority is M4 > M2 > M3 > M5 > M0 > M1 */
#define MAX_PARAM1 0x00302154
- writel(MAX_PARAM1, IMX_MAX_BASE + 0x0); /* for S0 */
- writel(MAX_PARAM1, IMX_MAX_BASE + 0x100); /* for S1 */
- writel(MAX_PARAM1, IMX_MAX_BASE + 0x200); /* for S2 */
- writel(MAX_PARAM1, IMX_MAX_BASE + 0x300); /* for S3 */
- writel(MAX_PARAM1, IMX_MAX_BASE + 0x400); /* for S4 */
+ writel(MAX_PARAM1, MX35_MAX_BASE_ADDR + 0x0); /* for S0 */
+ writel(MAX_PARAM1, MX35_MAX_BASE_ADDR + 0x100); /* for S1 */
+ writel(MAX_PARAM1, MX35_MAX_BASE_ADDR + 0x200); /* for S2 */
+ writel(MAX_PARAM1, MX35_MAX_BASE_ADDR + 0x300); /* for S3 */
+ writel(MAX_PARAM1, MX35_MAX_BASE_ADDR + 0x400); /* for S4 */
/* SGPCR - always park on last master */
- writel(0x10, IMX_MAX_BASE + 0x10); /* for S0 */
- writel(0x10, IMX_MAX_BASE + 0x110); /* for S1 */
- writel(0x10, IMX_MAX_BASE + 0x210); /* for S2 */
- writel(0x10, IMX_MAX_BASE + 0x310); /* for S3 */
- writel(0x10, IMX_MAX_BASE + 0x410); /* for S4 */
+ writel(0x10, MX35_MAX_BASE_ADDR + 0x10); /* for S0 */
+ writel(0x10, MX35_MAX_BASE_ADDR + 0x110); /* for S1 */
+ writel(0x10, MX35_MAX_BASE_ADDR + 0x210); /* for S2 */
+ writel(0x10, MX35_MAX_BASE_ADDR + 0x310); /* for S3 */
+ writel(0x10, MX35_MAX_BASE_ADDR + 0x410); /* for S4 */
/* MGPCR - restore default values */
- writel(0x0, IMX_MAX_BASE + 0x800); /* for M0 */
- writel(0x0, IMX_MAX_BASE + 0x900); /* for M1 */
- writel(0x0, IMX_MAX_BASE + 0xa00); /* for M2 */
- writel(0x0, IMX_MAX_BASE + 0xb00); /* for M3 */
- writel(0x0, IMX_MAX_BASE + 0xc00); /* for M4 */
- writel(0x0, IMX_MAX_BASE + 0xd00); /* for M5 */
+ writel(0x0, MX35_MAX_BASE_ADDR + 0x800); /* for M0 */
+ writel(0x0, MX35_MAX_BASE_ADDR + 0x900); /* for M1 */
+ writel(0x0, MX35_MAX_BASE_ADDR + 0xa00); /* for M2 */
+ writel(0x0, MX35_MAX_BASE_ADDR + 0xb00); /* for M3 */
+ writel(0x0, MX35_MAX_BASE_ADDR + 0xc00); /* for M4 */
+ writel(0x0, MX35_MAX_BASE_ADDR + 0xd00); /* for M5 */
/*
* M3IF Control Register (M3IFCTL)
@@ -288,7 +288,7 @@ static int pcm043_core_setup(void)
* ------------
* 0x00000040
*/
- writel(0x40, IMX_M3IF_BASE);
+ writel(0x40, MX35_M3IF_BASE_ADDR);
return 0;
}
@@ -309,10 +309,10 @@ static int do_cpufreq(int argc, char *argv[])
switch (freq) {
case 399:
- writel(MPCTL_PARAM_399, IMX_CCM_BASE + CCM_MPCTL);
+ writel(MPCTL_PARAM_399, MX35_CCM_BASE_ADDR + CCM_MPCTL);
break;
case 532:
- writel(MPCTL_PARAM_532, IMX_CCM_BASE + CCM_MPCTL);
+ writel(MPCTL_PARAM_532, MX35_CCM_BASE_ADDR + CCM_MPCTL);
break;
default:
return COMMAND_ERROR_USAGE;
diff --git a/arch/arm/mach-imx/imx35.c b/arch/arm/mach-imx/imx35.c
index 579e14814d..2e94f175e6 100644
--- a/arch/arm/mach-imx/imx35.c
+++ b/arch/arm/mach-imx/imx35.c
@@ -22,7 +22,7 @@
int imx_silicon_revision()
{
uint32_t reg;
- reg = readl(IMX_IIM_BASE + IIM_SREV);
+ reg = readl(MX35_IIM_BASE_ADDR + IIM_SREV);
/* 0×00 = TO 1.0, First silicon */
reg += IMX_CHIP_REV_1_0;
@@ -41,7 +41,7 @@ int imx_silicon_revision()
static int imx35_l2_fix(void)
{
- writel(0x515, IMX_CLKCTL_BASE + L2_MEM_VAL);
+ writel(0x515, MX35_CLKCTL_BASE_ADDR + L2_MEM_VAL);
return 0;
}
@@ -49,13 +49,13 @@ core_initcall(imx35_l2_fix);
static int imx35_init(void)
{
- add_generic_device("imx_iim", 0, NULL, IMX_IIM_BASE, SZ_4K,
+ add_generic_device("imx_iim", 0, NULL, MX35_IIM_BASE_ADDR, SZ_4K,
IORESOURCE_MEM, NULL);
- add_generic_device("imx31-gpt", 0, NULL, 0x53f90000, 0x100, IORESOURCE_MEM, NULL);
- add_generic_device("imx31-gpio", 0, NULL, 0x53fcc000, 0x1000, IORESOURCE_MEM, NULL);
- add_generic_device("imx31-gpio", 1, NULL, 0x53fd0000, 0x1000, IORESOURCE_MEM, NULL);
- add_generic_device("imx31-gpio", 2, NULL, 0x53fa4000, 0x1000, IORESOURCE_MEM, NULL);
+ add_generic_device("imx31-gpt", 0, NULL, MX35_GPT1_BASE_ADDR, 0x100, IORESOURCE_MEM, NULL);
+ add_generic_device("imx-gpio", 0, NULL, MX35_GPIO1_BASE_ADDR, 0x1000, IORESOURCE_MEM, NULL);
+ add_generic_device("imx-gpio", 1, NULL, MX35_GPIO2_BASE_ADDR, 0x1000, IORESOURCE_MEM, NULL);
+ add_generic_device("imx-gpio", 2, NULL, MX35_GPIO3_BASE_ADDR, 0x1000, IORESOURCE_MEM, NULL);
return 0;
}
diff --git a/arch/arm/mach-imx/include/mach/devices-imx35.h b/arch/arm/mach-imx/include/mach/devices-imx35.h
index 9ecaa35ffe..27c49e7161 100644
--- a/arch/arm/mach-imx/include/mach/devices-imx35.h
+++ b/arch/arm/mach-imx/include/mach/devices-imx35.h
@@ -3,60 +3,70 @@
static inline struct device_d *imx35_add_i2c0(struct i2c_platform_data *pdata)
{
- return imx_add_i2c((void *)IMX_I2C1_BASE, 0, pdata);
+ return imx_add_i2c((void *)MX35_I2C1_BASE_ADDR, 0, pdata);
}
static inline struct device_d *imx35_add_i2c1(struct i2c_platform_data *pdata)
{
- return imx_add_i2c((void *)IMX_I2C2_BASE, 1, pdata);
+ return imx_add_i2c((void *)MX35_I2C2_BASE_ADDR, 1, pdata);
}
static inline struct device_d *imx35_add_i2c2(struct i2c_platform_data *pdata)
{
- return imx_add_i2c((void *)IMX_I2C3_BASE, 2, pdata);
+ return imx_add_i2c((void *)MX35_I2C3_BASE_ADDR, 2, pdata);
}
static inline struct device_d *imx35_add_spi0(struct spi_imx_master *pdata)
{
- return imx_add_spi((void *)IMX_CSPI1_BASE, 0, pdata);
+ return imx_add_spi((void *)MX35_CSPI1_BASE_ADDR, 0, pdata);
+}
+
+static inline struct device_d *imx35_add_spi(struct spi_imx_master *pdata)
+{
+ return imx_add_spi((void *)MX35_CSPI2_BASE_ADDR, 1, pdata);
}
static inline struct device_d *imx35_add_uart0(void)
{
- return imx_add_uart((void *)IMX_UART1_BASE, 0);
+ return imx_add_uart((void *)MX35_UART1_BASE_ADDR, 0);
}
static inline struct device_d *imx35_add_uart1(void)
{
- return imx_add_uart((void *)IMX_UART2_BASE, 1);
+ return imx_add_uart((void *)MX35_UART2_BASE_ADDR, 1);
+}
+
+static inline struct device_d *imx35_add_uart2(void)
+{
+ return imx_add_uart((void *)MX35_UART3_BASE_ADDR, 2);
}
static inline struct device_d *imx35_add_nand(struct imx_nand_platform_data *pdata)
{
- return imx_add_nand((void *)IMX_NFC_BASE, pdata);
+ return imx_add_nand((void *)MX35_NFC_BASE_ADDR, pdata);
}
static inline struct device_d *imx35_add_fb(struct imx_ipu_fb_platform_data *pdata)
{
- return imx_add_ipufb((void *)IMX_IPU_BASE, pdata);
+ return imx_add_ipufb((void *)MX35_IPU_CTRL_BASE_ADDR, pdata);
}
static inline struct device_d *imx35_add_fec(struct fec_platform_data *pdata)
{
- return imx_add_fec((void *)IMX_FEC_BASE, pdata);
+ return imx_add_fec((void *)MX35_FEC_BASE_ADDR, pdata);
}
static inline struct device_d *imx35_add_mmc0(struct esdhc_platform_data *pdata)
{
- return imx_add_esdhc((void *)IMX_SDHC1_BASE, 0, pdata);
+ return imx_add_esdhc((void *)MX35_ESDHC1_BASE_ADDR, 0, pdata);
}
static inline struct device_d *imx35_add_mmc1(struct esdhc_platform_data *pdata)
{
- return imx_add_esdhc((void *)IMX_SDHC2_BASE, 1, pdata);
+ return imx_add_esdhc((void *)MX35_ESDHC2_BASE_ADDR, 1, pdata);
}
static inline struct device_d *imx35_add_mmc2(struct esdhc_platform_data *pdata)
{
- return imx_add_esdhc((void *)IMX_SDHC3_BASE, 2, pdata);
+ return imx_add_esdhc((void *)MX35_ESDHC3_BASE_ADDR, 2, pdata);
}
diff --git a/arch/arm/mach-imx/include/mach/imx35-regs.h b/arch/arm/mach-imx/include/mach/imx35-regs.h
index 5a4ab90082..8c6833875b 100644
--- a/arch/arm/mach-imx/include/mach/imx35-regs.h
+++ b/arch/arm/mach-imx/include/mach/imx35-regs.h
@@ -19,6 +19,8 @@
#ifndef __ASM_ARCH_MX35_REGS_H
#define __ASM_ARCH_MX35_REGS_H
+#include <sizes.h>
+
/*
* sanity check
*/
@@ -26,32 +28,122 @@
# error "Please do not include directly. Use imx-regs.h instead."
#endif
-#define IMX_L2CC_BASE 0x30000000
-#define IMX_CLKCTL_BASE 0x43F0C000
-#define IMX_UART1_BASE 0x43F90000
-#define IMX_UART2_BASE 0x43F94000
-#define IMX_TIM1_BASE 0x53F90000
-#define IMX_IOMUXC_BASE 0x43FAC000
-#define IMX_WDT_BASE 0x53FDC000
-#define IMX_MAX_BASE 0x43F04000
-#define IMX_ESD_BASE 0xb8001000
-#define IMX_AIPS1_BASE 0x43F00000
-#define IMX_AIPS2_BASE 0x53F00000
-#define IMX_CCM_BASE 0x53F80000
-#define IMX_IIM_BASE 0x53FF0000
-#define IMX_M3IF_BASE 0xB8003000
-#define IMX_NFC_BASE 0xBB000000
-#define IMX_FEC_BASE 0x50038000
-#define IMX_I2C1_BASE 0x43F80000
-#define IMX_I2C2_BASE 0x43F98000
-#define IMX_I2C3_BASE 0x43F84000
-#define IMX_CSPI1_BASE 0x43FA4000
-#define IMX_SDHC1_BASE 0x53FB4000
-#define IMX_SDHC2_BASE 0x53FB8000
-#define IMX_SDHC3_BASE 0x53FBC000
-#define IMX_IPU_BASE 0x53FC0000
-#define IMX_OTG_BASE 0x53FF4000
-#define IMX_WDOG_BASE 0x53fdc000
+#define MX35_IRAM_BASE_ADDR 0x10000000 /* internal ram */
+#define MX35_IRAM_SIZE SZ_128K
+
+#define MX35_L2CC_BASE_ADDR 0x30000000
+#define MX35_L2CC_SIZE SZ_1M
+
+#define MX35_AIPS1_BASE_ADDR 0x43f00000
+#define MX35_AIPS1_SIZE SZ_1M
+#define MX35_MAX_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x04000)
+#define MX35_EVTMON_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x08000)
+#define MX35_CLKCTL_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x0c000)
+#define MX35_ETB_SLOT4_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x10000)
+#define MX35_ETB_SLOT5_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x14000)
+#define MX35_ECT_CTIO_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x18000)
+#define MX35_I2C1_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x80000)
+#define MX35_I2C3_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x84000)
+#define MX35_UART1_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x90000)
+#define MX35_UART2_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x94000)
+#define MX35_I2C2_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x98000)
+#define MX35_OWIRE_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x9c000)
+#define MX35_SSI1_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0xa0000)
+#define MX35_CSPI1_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0xa4000)
+#define MX35_KPP_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0xa8000)
+#define MX35_IOMUXC_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0xac000)
+#define MX35_ECT_IP1_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0xb8000)
+#define MX35_ECT_IP2_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0xbc000)
+
+#define MX35_SPBA0_BASE_ADDR 0x50000000
+#define MX35_SPBA0_SIZE SZ_1M
+#define MX35_UART3_BASE_ADDR (MX35_SPBA0_BASE_ADDR + 0x0c000)
+#define MX35_CSPI2_BASE_ADDR (MX35_SPBA0_BASE_ADDR + 0x10000)
+#define MX35_SSI2_BASE_ADDR (MX35_SPBA0_BASE_ADDR + 0x14000)
+#define MX35_ATA_BASE_ADDR (MX35_SPBA0_BASE_ADDR + 0x20000)
+#define MX35_MSHC1_BASE_ADDR (MX35_SPBA0_BASE_ADDR + 0x24000)
+#define MX35_FEC_BASE_ADDR 0x50038000
+#define MX35_SPBA_CTRL_BASE_ADDR (MX35_SPBA0_BASE_ADDR + 0x3c000)
+
+#define MX35_AIPS2_BASE_ADDR 0x53f00000
+#define MX35_AIPS2_SIZE SZ_1M
+#define MX35_CCM_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0x80000)
+#define MX35_GPT1_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0x90000)
+#define MX35_EPIT1_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0x94000)
+#define MX35_EPIT2_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0x98000)
+#define MX35_GPIO3_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xa4000)
+#define MX35_SCC_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xac000)
+#define MX35_RNGA_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xb0000)
+#define MX35_ESDHC1_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xb4000)
+#define MX35_ESDHC2_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xb8000)
+#define MX35_ESDHC3_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xbc000)
+#define MX35_IPU_CTRL_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xc0000)
+#define MX35_AUDMUX_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xc4000)
+#define MX35_GPIO1_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xcc000)
+#define MX35_GPIO2_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xd0000)
+#define MX35_SDMA_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xd4000)
+#define MX35_RTC_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xd8000)
+#define MX35_WDOG_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xdc000)
+#define MX35_PWM_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xe0000)
+#define MX35_CAN1_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xe4000)
+#define MX35_CAN2_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xe8000)
+#define MX35_RTIC_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xec000)
+#define MX35_IIM_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xf0000)
+#define MX35_USB_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xf4000)
+#define MX35_USB_OTG_BASE_ADDR (MX35_USB_BASE_ADDR + 0x0000)
+
+/*
+ * The Reference Manual (IMX35RM, Rev. 2, 3/2009) claims an offset of 0x200 for
+ * HS. When host support was implemented only a preliminary document was
+ * available, which told 0x400. This works fine.
+ */
+#define MX35_USB_HS_BASE_ADDR (MX35_USB_BASE_ADDR + 0x0400)
+
+#define MX35_ROMP_BASE_ADDR 0x60000000
+#define MX35_ROMP_SIZE SZ_1M
+
+#define MX35_AVIC_BASE_ADDR 0x68000000
+#define MX35_AVIC_SIZE SZ_1M
+
+/*
+ * Memory regions and CS
+ */
+#define MX35_IPU_MEM_BASE_ADDR 0x70000000
+#define MX35_CSD0_BASE_ADDR 0x80000000
+#define MX35_CSD1_BASE_ADDR 0x90000000
+
+#define MX35_CS0_BASE_ADDR 0xa0000000
+#define MX35_CS1_BASE_ADDR 0xa8000000
+#define MX35_CS2_BASE_ADDR 0xb0000000
+#define MX35_CS3_BASE_ADDR 0xb2000000
+
+#define MX35_CS4_BASE_ADDR 0xb4000000
+#define MX35_CS4_SIZE SZ_32M
+
+#define MX35_CS5_BASE_ADDR 0xb6000000
+#define MX35_CS5_SIZE SZ_32M
+
+/*
+ * NAND, SDRAM, WEIM, M3IF, EMI controllers
+ */
+#define MX35_X_MEMC_BASE_ADDR 0xb8000000
+#define MX35_X_MEMC_SIZE SZ_64K
+#define MX35_ESDCTL_BASE_ADDR (MX35_X_MEMC_BASE_ADDR + 0x1000)
+#define MX35_WEIM_BASE_ADDR (MX35_X_MEMC_BASE_ADDR + 0x2000)
+#define MX35_M3IF_BASE_ADDR (MX35_X_MEMC_BASE_ADDR + 0x3000)
+#define MX35_EMI_CTL_BASE_ADDR (MX35_X_MEMC_BASE_ADDR + 0x4000)
+#define MX35_PCMCIA_CTL_BASE_ADDR MX35_EMI_CTL_BASE_ADDR
+
+#define MX35_NFC_BASE_ADDR 0xbb000000
+#define MX35_PCMCIA_MEM_BASE_ADDR 0xbc000000
+
+/* FIXME: Get rid of these */
+#define IMX_WDT_BASE MX35_WDOG_BASE_ADDR
+#define IMX_TIM1_BASE MX35_GPT1_BASE_ADDR
+#define IMX_ESD_BASE MX35_ESDCTL_BASE_ADDR
+#define IMX_IOMUXC_BASE MX35_IOMUXC_BASE_ADDR
+#define IMX_CCM_BASE MX35_CCM_BASE_ADDR
+#define IMX_NFC_BASE MX35_NFC_BASE_ADDR
/*
* Clock Controller Module (CCM)
@@ -88,25 +180,6 @@
#define PDR0_AUTO_CON (1 << 0)
#define PDR0_PER_SEL (1 << 26)
-/*
- * Adresses and ranges of the external chip select lines
- */
-#define IMX_CS0_BASE 0xA0000000
-#define IMX_CS0_RANGE (128 * 1024 * 1024)
-#define IMX_CS1_BASE 0xA8000000
-#define IMX_CS1_RANGE (128 * 1024 * 1024)
-#define IMX_CS2_BASE 0xB0000000
-#define IMX_CS2_RANGE (32 * 1024 * 1024)
-#define IMX_CS3_BASE 0xB2000000
-#define IMX_CS3_RANGE (32 * 1024 * 1024)
-#define IMX_CS4_BASE 0xB4000000
-#define IMX_CS4_RANGE (32 * 1024 * 1024)
-#define IMX_CS5_BASE 0xB6000000
-#define IMX_CS5_RANGE (32 * 1024 * 1024)
-
-#define IMX_SDRAM_CS0 0x80000000
-#define IMX_SDRAM_CS1 0x90000000
-
#define WEIM_BASE 0xb8002000
#define CSCR_U(x) (WEIM_BASE + (x) * 0x10)
#define CSCR_L(x) (WEIM_BASE + 4 + (x) * 0x10)
diff --git a/arch/arm/mach-imx/speed-imx35.c b/arch/arm/mach-imx/speed-imx35.c
index a4e0120da5..a8063f20b3 100644
--- a/arch/arm/mach-imx/speed-imx35.c
+++ b/arch/arm/mach-imx/speed-imx35.c
@@ -21,13 +21,13 @@
unsigned long imx_get_mpllclk(void)
{
- ulong mpctl = readl(IMX_CCM_BASE + CCM_MPCTL);
+ ulong mpctl = readl(MX35_CCM_BASE_ADDR + CCM_MPCTL);
return imx_decode_pll(mpctl, CONFIG_MX35_HCLK_FREQ);
}
static unsigned long imx_get_ppllclk(void)
{
- ulong ppctl = readl(IMX_CCM_BASE + CCM_PPCTL);
+ ulong ppctl = readl(MX35_CCM_BASE_ADDR + CCM_PPCTL);
return imx_decode_pll(ppctl, CONFIG_MX35_HCLK_FREQ);
}
@@ -56,7 +56,7 @@ static struct arm_ahb_div clk_consumer[] = {
static unsigned long imx_get_armclk(void)
{
- unsigned long pdr0 = readl(IMX_CCM_BASE + CCM_PDR0);
+ unsigned long pdr0 = readl(MX35_CCM_BASE_ADDR + CCM_PDR0);
struct arm_ahb_div *aad;
unsigned long fref = imx_get_mpllclk();
@@ -70,7 +70,7 @@ static unsigned long imx_get_armclk(void)
unsigned long imx_get_ahbclk(void)
{
- unsigned long pdr0 = readl(IMX_CCM_BASE + CCM_PDR0);
+ unsigned long pdr0 = readl(MX35_CCM_BASE_ADDR + CCM_PDR0);
struct arm_ahb_div *aad;
unsigned long fref = imx_get_mpllclk();
@@ -100,8 +100,8 @@ static unsigned long get_6_div(unsigned long in)
static unsigned long imx_get_ipg_perclk(void)
{
- ulong pdr0 = readl(IMX_CCM_BASE + CCM_PDR0);
- ulong pdr4 = readl(IMX_CCM_BASE + CCM_PDR4);
+ ulong pdr0 = readl(MX35_CCM_BASE_ADDR + CCM_PDR0);
+ ulong pdr4 = readl(MX35_CCM_BASE_ADDR + CCM_PDR4);
ulong div;
ulong fref;
@@ -129,7 +129,7 @@ unsigned long imx_get_gptclk(void)
*/
unsigned long imx_get_lcdclk(void)
{
- unsigned long hsp_podf = (readl(IMX_CCM_BASE + CCM_PDR0) >> 20) & 0x03;
+ unsigned long hsp_podf = (readl(MX35_CCM_BASE_ADDR + CCM_PDR0) >> 20) & 0x03;
unsigned long base_clk = imx_get_armclk();
if (base_clk > 400 * 1000 * 1000) {
@@ -156,8 +156,8 @@ unsigned long imx_get_lcdclk(void)
unsigned long imx_get_uartclk(void)
{
- unsigned long pdr3 = readl(IMX_CCM_BASE + CCM_PDR3);
- unsigned long pdr4 = readl(IMX_CCM_BASE + CCM_PDR4);
+ unsigned long pdr3 = readl(MX35_CCM_BASE_ADDR + CCM_PDR3);
+ unsigned long pdr4 = readl(MX35_CCM_BASE_ADDR + CCM_PDR4);
unsigned long div = get_3_3_div(pdr4 >> 10);
if (pdr3 & (1 << 14))
@@ -169,7 +169,7 @@ unsigned long imx_get_uartclk(void)
/* mmc0 clk only */
unsigned long imx_get_mmcclk(void)
{
- unsigned long pdr3 = readl(IMX_CCM_BASE + CCM_PDR3);
+ unsigned long pdr3 = readl(MX35_CCM_BASE_ADDR + CCM_PDR3);
unsigned long div = get_6_div(pdr3);
if (pdr3 & (1 << 6))
@@ -213,7 +213,7 @@ void imx_dump_clocks(void)
*/
int imx_clko_set_div(int num, int div)
{
- unsigned long cosr = readl(IMX_CCM_BASE + CCM_COSR);
+ unsigned long cosr = readl(MX35_CCM_BASE_ADDR + CCM_COSR);
if (num != 1)
return -ENODEV;
@@ -224,7 +224,7 @@ int imx_clko_set_div(int num, int div)
cosr &= ~(0x3f << 10);
cosr |= div << 10;
- writel(cosr, IMX_CCM_BASE + CCM_COSR);
+ writel(cosr, MX35_CCM_BASE_ADDR + CCM_COSR);
return div + 1;
}
@@ -234,14 +234,14 @@ int imx_clko_set_div(int num, int div)
*/
void imx_clko_set_src(int num, int src)
{
- unsigned long cosr = readl(IMX_CCM_BASE + CCM_COSR);
+ unsigned long cosr = readl(MX35_CCM_BASE_ADDR + CCM_COSR);
if (num != 1)
return;
if (src < 0) {
cosr &= ~(1 << 5);
- writel(cosr, IMX_CCM_BASE + CCM_COSR);
+ writel(cosr, MX35_CCM_BASE_ADDR + CCM_COSR);
return;
}
@@ -250,6 +250,6 @@ void imx_clko_set_src(int num, int src)
cosr &= ~(1 << 6);
cosr |= src & 0x1f;
- writel(cosr, IMX_CCM_BASE + CCM_COSR);
+ writel(cosr, MX35_CCM_BASE_ADDR + CCM_COSR);
}
generated by cgit v1.2.3 (git 2.39.1) at 2024-04-27 21:57:12 +0000