diff options
| -rw-r--r-- | drivers/mtd/devices/mtd_dataflash.c | 202 |
1 files changed, 113 insertions, 89 deletions
diff --git a/drivers/mtd/devices/mtd_dataflash.c b/drivers/mtd/devices/mtd_dataflash.c index fa31b61464..4b8eaec057 100644 --- a/drivers/mtd/devices/mtd_dataflash.c +++ b/drivers/mtd/devices/mtd_dataflash.c @@ -83,9 +83,13 @@ #define OP_WRITE_SECURITY_REVC 0x9A #define OP_WRITE_SECURITY 0x9B /* revision D */ +#define CFI_MFR_ATMEL 0x1F + +#define DATAFLASH_SHIFT_EXTID 24 +#define DATAFLASH_SHIFT_ID 40 struct dataflash { - uint8_t command[4]; + u8 command[4]; char name[24]; unsigned partitioned:1; @@ -122,8 +126,7 @@ static int dataflash_waitready(struct spi_device *spi) for (;;) { status = dataflash_status(spi); if (status < 0) { - pr_debug("%s: status %d?\n", - dev_name(&spi->dev), status); + dev_dbg(&spi->dev, "status %d?\n", status); status = 0; } @@ -146,12 +149,11 @@ static int dataflash_erase(struct mtd_info *mtd, struct erase_info *instr) struct spi_transfer x; struct spi_message msg; unsigned blocksize = priv->page_size << 3; - uint8_t *command; - uint32_t rem; + u8 *command; + u32 rem; - pr_debug("%s: erase addr=0x%llx len 0x%llx\n", - dev_name(&spi->dev), (long long)instr->addr, - (long long)instr->len); + dev_dbg(&spi->dev, "erase addr=0x%llx len 0x%llx\n", + (long long)instr->addr, (long long)instr->len); div_u64_rem(instr->len, priv->page_size, &rem); if (rem) @@ -181,11 +183,11 @@ static int dataflash_erase(struct mtd_info *mtd, struct erase_info *instr) pageaddr = pageaddr << priv->page_offset; command[0] = do_block ? OP_ERASE_BLOCK : OP_ERASE_PAGE; - command[1] = (uint8_t)(pageaddr >> 16); - command[2] = (uint8_t)(pageaddr >> 8); + command[1] = (u8)(pageaddr >> 16); + command[2] = (u8)(pageaddr >> 8); command[3] = 0; - pr_debug("ERASE %s: (%x) %x %x %x [%i]\n", + dev_dbg(&spi->dev, "ERASE %s: (%x) %x %x %x [%i]\n", do_block ? "block" : "page", command[0], command[1], command[2], command[3], pageaddr); @@ -194,8 +196,8 @@ static int dataflash_erase(struct mtd_info *mtd, struct erase_info *instr) (void) dataflash_waitready(spi); if (status < 0) { - printk(KERN_ERR "%s: erase %x, err %d\n", - dev_name(&spi->dev), pageaddr, status); + dev_err(&spi->dev, "erase %x, err %d\n", + pageaddr, status); /* REVISIT: can retry instr->retries times; or * giveup and instr->fail_addr = instr->addr; */ @@ -232,11 +234,11 @@ static int dataflash_read(struct mtd_info *mtd, loff_t from, size_t len, struct spi_transfer x[2]; struct spi_message msg; unsigned int addr; - uint8_t *command; + u8 *command; int status; - pr_debug("%s: read 0x%x..0x%x\n", dev_name(&priv->spi->dev), - (unsigned)from, (unsigned)(from + len)); + dev_dbg(&priv->spi->dev, "read 0x%x..0x%x\n", + (unsigned)from, (unsigned)(from + len)); /* Calculate flash page/byte address */ addr = (((unsigned)from / priv->page_size) << priv->page_offset) @@ -244,7 +246,7 @@ static int dataflash_read(struct mtd_info *mtd, loff_t from, size_t len, command = priv->command; - pr_debug("READ: (%x) %x %x %x\n", + dev_dbg(&priv->spi->dev, "READ: (%x) %x %x %x\n", command[0], command[1], command[2], command[3]); spi_message_init(&msg); @@ -264,9 +266,9 @@ static int dataflash_read(struct mtd_info *mtd, loff_t from, size_t len, * fewer "don't care" bytes. Both buffers stay unchanged. */ command[0] = OP_READ_CONTINUOUS; - command[1] = (uint8_t)(addr >> 16); - command[2] = (uint8_t)(addr >> 8); - command[3] = (uint8_t)(addr >> 0); + command[1] = (u8)(addr >> 16); + command[2] = (u8)(addr >> 8); + command[3] = (u8)(addr >> 0); /* plus 4 "don't care" bytes */ status = spi_sync(priv->spi, &msg); @@ -275,8 +277,7 @@ static int dataflash_read(struct mtd_info *mtd, loff_t from, size_t len, *retlen = msg.actual_length - 8; status = 0; } else - pr_debug("%s: read %x..%x --> %d\n", - dev_name(&priv->spi->dev), + dev_dbg(&priv->spi->dev, "read %x..%x --> %d\n", (unsigned)from, (unsigned)(from + len), status); return status; @@ -300,10 +301,10 @@ static int dataflash_write(struct mtd_info *mtd, loff_t to, size_t len, size_t remaining = len; u_char *writebuf = (u_char *) buf; int status = -EINVAL; - uint8_t *command; + u8 *command; - pr_debug("%s: write 0x%x..0x%x\n", - dev_name(&spi->dev), (unsigned)to, (unsigned)(to + len)); + dev_dbg(&spi->dev, "write 0x%x..0x%x\n", + (unsigned)to, (unsigned)(to + len)); spi_message_init(&msg); @@ -321,7 +322,7 @@ static int dataflash_write(struct mtd_info *mtd, loff_t to, size_t len, writelen = len; while (remaining > 0) { - pr_debug("write @ %i:%i len=%i\n", + dev_dbg(&spi->dev, "write @ %i:%i len=%i\n", pageaddr, offset, writelen); /* REVISIT: @@ -349,13 +350,13 @@ static int dataflash_write(struct mtd_info *mtd, loff_t to, size_t len, command[2] = (addr & 0x0000FF00) >> 8; command[3] = 0; - pr_debug("TRANSFER: (%x) %x %x %x\n", + dev_dbg(&spi->dev, "TRANSFER: (%x) %x %x %x\n", command[0], command[1], command[2], command[3]); status = spi_sync(spi, &msg); if (status < 0) - pr_debug("%s: xfer %u -> %d\n", - dev_name(&spi->dev), addr, status); + dev_dbg(&spi->dev, "xfer %u -> %d\n", + addr, status); (void) dataflash_waitready(priv->spi); } @@ -367,7 +368,7 @@ static int dataflash_write(struct mtd_info *mtd, loff_t to, size_t len, command[2] = (addr & 0x0000FF00) >> 8; command[3] = (addr & 0x000000FF); - pr_debug("PROGRAM: (%x) %x %x %x\n", + dev_dbg(&spi->dev, "PROGRAM: (%x) %x %x %x\n", command[0], command[1], command[2], command[3]); x[1].tx_buf = writebuf; @@ -376,8 +377,8 @@ static int dataflash_write(struct mtd_info *mtd, loff_t to, size_t len, status = spi_sync(spi, &msg); spi_transfer_del(x + 1); if (status < 0) - pr_debug("%s: pgm %u/%u -> %d\n", - dev_name(&spi->dev), addr, writelen, status); + dev_dbg(&spi->dev, "pgm %u/%u -> %d\n", + addr, writelen, status); (void) dataflash_waitready(priv->spi); @@ -391,20 +392,20 @@ static int dataflash_write(struct mtd_info *mtd, loff_t to, size_t len, command[2] = (addr & 0x0000FF00) >> 8; command[3] = 0; - pr_debug("COMPARE: (%x) %x %x %x\n", + dev_dbg(&spi->dev, "COMPARE: (%x) %x %x %x\n", command[0], command[1], command[2], command[3]); status = spi_sync(spi, &msg); if (status < 0) - pr_debug("%s: compare %u -> %d\n", - dev_name(&spi->dev), addr, status); + dev_dbg(&spi->dev, "compare %u -> %d\n", + addr, status); status = dataflash_waitready(priv->spi); /* Check result of the compare operation */ if (status & (1 << 6)) { - printk(KERN_ERR "%s: compare page %u, err %d\n", - dev_name(&spi->dev), pageaddr, status); + dev_err(&spi->dev, "compare page %u, err %d\n", + pageaddr, status); remaining = 0; status = -EIO; break; @@ -446,11 +447,11 @@ static int dataflash_get_otp_info(struct mtd_info *mtd, } static ssize_t otp_read(struct spi_device *spi, unsigned base, - uint8_t *buf, loff_t off, size_t len) + u8 *buf, loff_t off, size_t len) { struct spi_message m; size_t l; - uint8_t *scratch; + u8 *scratch; struct spi_transfer t; int status; @@ -525,7 +526,7 @@ static int dataflash_write_user_otp(struct mtd_info *mtd, { struct spi_message m; const size_t l = 4 + 64; - uint8_t *scratch; + u8 *scratch; struct spi_transfer t; struct dataflash *priv = mtd->priv; int status; @@ -667,14 +668,15 @@ struct flash_info { /* JEDEC id has a high byte of zero plus three data bytes: * the manufacturer id, then a two byte device id. */ - uint32_t jedec_id; + u64 jedec_id; /* The size listed here is what works with OP_ERASE_PAGE. */ unsigned nr_pages; - uint16_t pagesize; - uint16_t pageoffset; + u16 pagesize; + u16 pageoffset; - uint16_t flags; + u16 flags; +#define SUP_EXTID 0x0004 /* supports extended ID data */ #define SUP_POW2PS 0x0002 /* supports 2^N byte pages */ #define IS_POW2PS 0x0001 /* uses 2^N byte pages */ }; @@ -712,54 +714,32 @@ static struct flash_info dataflash_data [] = { { "AT45DB642x", 0x1f2800, 8192, 1056, 11, SUP_POW2PS}, { "at45db642d", 0x1f2800, 8192, 1024, 10, SUP_POW2PS | IS_POW2PS}, + + { "AT45DB641E", 0x1f28000100, 32768, 264, 9, SUP_EXTID | SUP_POW2PS}, + { "at45db641e", 0x1f28000100, 32768, 256, 8, SUP_EXTID | SUP_POW2PS | IS_POW2PS}, }; -static struct flash_info * jedec_probe(struct spi_device *spi) +static struct flash_info *jedec_lookup(struct spi_device *spi, + u64 jedec, bool use_extid) { - int tmp; - uint8_t code = OP_READ_ID; - uint8_t id[3]; - uint32_t jedec; - struct flash_info *info; + struct flash_info *info; int status; - /* JEDEC also defines an optional "extended device information" - * string for after vendor-specific data, after the three bytes - * we use here. Supporting some chips might require using it. - * - * If the vendor ID isn't Atmel's (0x1f), assume this call failed. - * That's not an error; only rev C and newer chips handle it, and - * only Atmel sells these chips. - */ - tmp = spi_write_then_read(spi, &code, 1, id, 3); - if (tmp < 0) { - pr_debug("%s: error %d reading JEDEC ID\n", - dev_name(&spi->dev), tmp); - return ERR_PTR(tmp); - } - if (id[0] != 0x1f) - return NULL; - - jedec = id[0]; - jedec = jedec << 8; - jedec |= id[1]; - jedec = jedec << 8; - jedec |= id[2]; + for (info = dataflash_data; + info < dataflash_data + ARRAY_SIZE(dataflash_data); + info++) { + if (use_extid && !(info->flags & SUP_EXTID)) + continue; - for (tmp = 0, info = dataflash_data; - tmp < ARRAY_SIZE(dataflash_data); - tmp++, info++) { if (info->jedec_id == jedec) { - pr_debug("%s: OTP, sector protect%s\n", - dev_name(&spi->dev), - (info->flags & SUP_POW2PS) - ? ", binary pagesize" : "" - ); + dev_dbg(&spi->dev, "OTP, sector protect%s\n", + (info->flags & SUP_POW2PS) ? + ", binary pagesize" : ""); if (info->flags & SUP_POW2PS) { status = dataflash_status(spi); if (status < 0) { - pr_debug("%s: status error %d\n", - dev_name(&spi->dev), status); + dev_dbg(&spi->dev, "status error %d\n", + status); return ERR_PTR(status); } if (status & 0x1) { @@ -774,12 +754,59 @@ static struct flash_info * jedec_probe(struct spi_device *spi) } } + return ERR_PTR(-ENODEV); +} + +static struct flash_info * jedec_probe(struct spi_device *spi) +{ + int ret; + u8 code = OP_READ_ID; + u64 jedec; + u8 id[sizeof(jedec)] = {0}; + const unsigned int id_size = 5; + struct flash_info *info; + + /* + * JEDEC also defines an optional "extended device information" + * string for after vendor-specific data, after the three bytes + * we use here. Supporting some chips might require using it. + * + * If the vendor ID isn't Atmel's (0x1f), assume this call failed. + * That's not an error; only rev C and newer chips handle it, and + * only Atmel sells these chips. + */ + ret = spi_write_then_read(spi, &code, 1, id, id_size); + if (ret < 0) { + dev_dbg(&spi->dev, "error %d reading JEDEC ID\n", ret); + return ERR_PTR(ret); + } + + if (id[0] != CFI_MFR_ATMEL) + return NULL; + + jedec = be64_to_cpup((__be64 *)id); + + /* + * First, try to match device using extended device + * information + */ + info = jedec_lookup(spi, jedec >> DATAFLASH_SHIFT_EXTID, true); + if (!IS_ERR(info)) + return info; + /* + * If that fails, make another pass using regular ID + * information + */ + info = jedec_lookup(spi, jedec >> DATAFLASH_SHIFT_ID, false); + if (!IS_ERR(info)) + return info; + /* * Treat other chips as errors ... we won't know the right page * size (it might be binary) even when we can tell which density * class is involved (legacy chip id scheme). */ - dev_warn(&spi->dev, "JEDEC id %06x not handled\n", jedec); + dev_warn(&spi->dev, "JEDEC id %016llx not handled\n", jedec); return ERR_PTR(-ENODEV); } @@ -824,8 +851,7 @@ static int dataflash_probe(struct device_d *dev) */ status = dataflash_status(spi); if (status <= 0 || status == 0xff) { - pr_debug("%s: status error %d\n", - dev_name(&spi->dev), status); + dev_dbg(&spi->dev, "status error %d\n", status); if (status == 0 || status == 0xff) status = -ENODEV; return status; @@ -860,14 +886,12 @@ static int dataflash_probe(struct device_d *dev) break; /* obsolete AT45DB1282 not (yet?) supported */ default: - pr_debug("%s: unsupported device (%x)\n", dev_name(&spi->dev), - status & 0x3c); + dev_dbg(&spi->dev, "unsupported device (%x)\n", status & 0x3c); status = -ENODEV; } if (status < 0) - pr_debug("%s: add_dataflash --> %d\n", dev_name(&spi->dev), - status); + dev_dbg(&spi->dev, "add_dataflash --> %d\n", status); return status; } |