diff options
| -rw-r--r-- | arch/arm/boards/solidrun-microsom/board.c | 19 | ||||
| -rw-r--r-- | arch/arm/boards/solidrun-microsom/lowlevel.c | 42 | ||||
| -rw-r--r-- | arch/arm/dts/Makefile | 4 | ||||
| -rw-r--r-- | arch/arm/dts/imx6dl-hummingboard2.dts | 71 | ||||
| -rw-r--r-- | arch/arm/dts/imx6q-hummingboard2.dts | 87 | ||||
| -rw-r--r-- | arch/arm/dts/imx6qdl-hummingboard2.dtsi | 536 | ||||
| -rw-r--r-- | images/Makefile.imx | 30 |
7 files changed, 781 insertions, 8 deletions
diff --git a/arch/arm/boards/solidrun-microsom/board.c b/arch/arm/boards/solidrun-microsom/board.c index b9041687e4..155199ff78 100644 --- a/arch/arm/boards/solidrun-microsom/board.c +++ b/arch/arm/boards/solidrun-microsom/board.c @@ -78,7 +78,9 @@ static void microsom_eth_init(void) static int hummingboard_device_init(void) { if (!of_machine_is_compatible("solidrun,hummingboard/dl") && - !of_machine_is_compatible("solidrun,hummingboard/q")) + !of_machine_is_compatible("solidrun,hummingboard/q") && + !of_machine_is_compatible("solidrun,hummingboard2/dl") && + !of_machine_is_compatible("solidrun,hummingboard2/q")) return 0; microsom_eth_init(); @@ -108,13 +110,26 @@ device_initcall(h100_device_init); static int hummingboard_late_init(void) { + bool emmc_present = false; + if (!of_machine_is_compatible("solidrun,hummingboard/dl") && !of_machine_is_compatible("solidrun,hummingboard/q") && + !of_machine_is_compatible("solidrun,hummingboard2/dl") && + !of_machine_is_compatible("solidrun,hummingboard2/q") && !of_machine_is_compatible("auvidea,h100")) return 0; + if (of_machine_is_compatible("solidrun,hummingboard2/dl") || + of_machine_is_compatible("solidrun,hummingboard2/q")) + emmc_present = true; + imx6_bbu_internal_mmc_register_handler("sdcard", "/dev/mmc1.barebox", - BBU_HANDLER_FLAG_DEFAULT); + emmc_present ? 0 : BBU_HANDLER_FLAG_DEFAULT); + + if (emmc_present) { + imx6_bbu_internal_mmc_register_handler("emmc", + "/dev/mmc2.barebox", BBU_HANDLER_FLAG_DEFAULT); + } return 0; } diff --git a/arch/arm/boards/solidrun-microsom/lowlevel.c b/arch/arm/boards/solidrun-microsom/lowlevel.c index 7b97f2e947..cc15958d64 100644 --- a/arch/arm/boards/solidrun-microsom/lowlevel.c +++ b/arch/arm/boards/solidrun-microsom/lowlevel.c @@ -5,6 +5,8 @@ extern char __dtb_imx6dl_hummingboard_start[]; extern char __dtb_imx6q_hummingboard_start[]; +extern char __dtb_imx6dl_hummingboard2_start[]; +extern char __dtb_imx6q_hummingboard2_start[]; extern char __dtb_imx6q_h100_start[]; ENTRY_FUNCTION(start_hummingboard_microsom_i1, r0, r1, r2) @@ -47,6 +49,46 @@ ENTRY_FUNCTION(start_hummingboard_microsom_i4, r0, r1, r2) imx6q_barebox_entry(fdt); } +ENTRY_FUNCTION(start_hummingboard2_microsom_i1, r0, r1, r2) +{ + void *fdt; + + imx6_cpu_lowlevel_init(); + + fdt = __dtb_imx6dl_hummingboard2_start - get_runtime_offset(); + imx6q_barebox_entry(fdt); +} + +ENTRY_FUNCTION(start_hummingboard2_microsom_i2, r0, r1, r2) +{ + void *fdt; + + imx6_cpu_lowlevel_init(); + + fdt = __dtb_imx6dl_hummingboard2_start - get_runtime_offset(); + imx6q_barebox_entry(fdt); +} + +ENTRY_FUNCTION(start_hummingboard2_microsom_i2ex, r0, r1, r2) +{ + void *fdt; + + imx6_cpu_lowlevel_init(); + + fdt = __dtb_imx6q_hummingboard2_start - get_runtime_offset(); + imx6q_barebox_entry(fdt); +} + +ENTRY_FUNCTION(start_hummingboard2_microsom_i4, r0, r1, r2) +{ + void *fdt; + + imx6_cpu_lowlevel_init(); + + fdt = __dtb_imx6q_hummingboard2_start - get_runtime_offset(); + imx6q_barebox_entry(fdt); +} + ENTRY_FUNCTION(start_h100_microsom_i2ex, r0, r1, r2) { void *fdt; diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index e8ad43bfd8..fe3f08ed0a 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -68,7 +68,9 @@ pbl-dtb-$(CONFIG_MACH_SOCFPGA_EBV_SOCRATES) += socfpga_cyclone5_socrates.dtb.o pbl-dtb-$(CONFIG_MACH_SOCFPGA_TERASIC_DE0_NANO_SOC) += socfpga_cyclone5_de0_nano_soc.dtb.o pbl-dtb-$(CONFIG_MACH_SOCFPGA_TERASIC_SOCKIT) += socfpga_cyclone5_sockit.dtb.o pbl-dtb-$(CONFIG_MACH_SOLIDRUN_CUBOX) += dove-cubox-bb.dtb.o -pbl-dtb-$(CONFIG_MACH_SOLIDRUN_MICROSOM) += imx6dl-hummingboard.dtb.o imx6q-hummingboard.dtb.o imx6q-h100.dtb.o +pbl-dtb-$(CONFIG_MACH_SOLIDRUN_MICROSOM) += imx6dl-hummingboard.dtb.o imx6q-hummingboard.dtb.o \ + imx6dl-hummingboard2.dtb.o imx6q-hummingboard2.dtb.o \ + imx6q-h100.dtb.o pbl-dtb-$(CONFIG_MACH_TECHNEXION_WANDBOARD) += imx6q-wandboard.dtb.o imx6dl-wandboard.dtb.o pbl-dtb-$(CONFIG_MACH_TORADEX_COLIBRI_T20) += tegra20-colibri-iris.dtb.o pbl-dtb-$(CONFIG_MACH_TOSHIBA_AC100) += tegra20-paz00.dtb.o diff --git a/arch/arm/dts/imx6dl-hummingboard2.dts b/arch/arm/dts/imx6dl-hummingboard2.dts new file mode 100644 index 0000000000..40ef174411 --- /dev/null +++ b/arch/arm/dts/imx6dl-hummingboard2.dts @@ -0,0 +1,71 @@ +/* + * Device Tree file for SolidRun HummingBoard2 + * Copyright (C) 2015 Rabeeh Khoury <rabeeh@solid-run.com> + * Based on work by Russell King + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +/dts-v1/; + +#include <arm/imx6dl.dtsi> +#include "imx6qdl-hummingboard2.dtsi" + +/ { + model = "SolidRun HummingBoard2 Solo/DualLite"; + compatible = "solidrun,hummingboard2/dl", "fsl,imx6dl"; +}; + +&ocotp { + barebox,provide-mac-address = <&fec 0x620>; +}; + +&usdhc3 { + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "barebox"; + reg = <0x0 0xe0000>; + }; + + partition@e0000 { + label = "barebox-environment"; + reg = <0xe0000 0x20000>; + }; +}; diff --git a/arch/arm/dts/imx6q-hummingboard2.dts b/arch/arm/dts/imx6q-hummingboard2.dts new file mode 100644 index 0000000000..89065581b8 --- /dev/null +++ b/arch/arm/dts/imx6q-hummingboard2.dts @@ -0,0 +1,87 @@ +/* + * Device Tree file for SolidRun HummingBoard2 + * Copyright (C) 2015 Rabeeh Khoury <rabeeh@solid-run.com> + * Based on work by Russell King + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +/dts-v1/; + +#include <arm/imx6q.dtsi> +#include "imx6qdl-hummingboard2.dtsi" +#include "imx6q.dtsi" + +/ { + model = "SolidRun HummingBoard2 Dual/Quad"; + compatible = "solidrun,hummingboard2/q", "fsl,imx6q"; + + chosen { + environment@0 { + compatible = "barebox,environment"; + device-path = &usdhc3, "partname:barebox-environment"; + }; + }; +}; + +&sata { + status = "okay"; + fsl,transmit-level-mV = <1104>; + fsl,transmit-boost-mdB = <0>; + fsl,transmit-atten-16ths = <9>; + fsl,no-spread-spectrum; +}; + +&ocotp { + barebox,provide-mac-address = <&fec 0x620>; +}; + +&usdhc3 { + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "barebox"; + reg = <0x0 0xe0000>; + }; + + partition@e0000 { + label = "barebox-environment"; + reg = <0xe0000 0x20000>; + }; +}; diff --git a/arch/arm/dts/imx6qdl-hummingboard2.dtsi b/arch/arm/dts/imx6qdl-hummingboard2.dtsi new file mode 100644 index 0000000000..2a5f389378 --- /dev/null +++ b/arch/arm/dts/imx6qdl-hummingboard2.dtsi @@ -0,0 +1,536 @@ +/* + * Device Tree file for SolidRun HummingBoard2 + * Copyright (C) 2015 Rabeeh Khoury <rabeeh@solid-run.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +#include <arm/imx6qdl-microsom.dtsi> +#include <arm/imx6qdl-microsom-ar8035.dtsi> + +/ { + chosen { + stdout-path = &uart1; + }; + + ir_recv: ir-receiver { + compatible = "gpio-ir-receiver"; + gpios = <&gpio7 9 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard2_gpio7_9>; + linux,rc-map-name = "rc-rc6-mce"; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V2"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_1p8v: regulator-1p8v { + compatible = "regulator-fixed"; + regulator-name = "VCC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + reg_usbh2_vbus: regulator-usb-h1-vbus { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard2_usbh1_vbus>; + regulator-name = "V_USB2"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + reg_usbotg_vbus: regulator-usb-otg-vbus { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard2_usbotg_vbus>; + regulator-name = "V_USB1"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_usbh3_vbus: regulator-usb-h2-vbus { + compatible = "regulator-fixed"; + enable-active-high; + enable-gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard2_usbh2_vbus>; + regulator-name = "V_USB3"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + reg_usbh4_vbus: regulator-usb-h3-vbus { + compatible = "regulator-fixed"; + enable-active-high; + enable-gpio = <&gpio7 10 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard2_usbh3_vbus>; + regulator-name = "V_USB4"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + reg_usdhc2_vmmc: reg-usdhc2-vmmc { + compatible = "regulator-fixed"; + gpio = <&gpio4 30 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard2_vmmc>; + regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "V_SD"; + startup-delay-us = <1000>; + }; + + sound-sgtl5000 { + audio-codec = <&sgtl5000>; + audio-routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + compatible = "fsl,imx-audio-sgtl5000"; + model = "On-board Codec"; + mux-ext-port = <5>; + mux-int-port = <1>; + ssi-controller = <&ssi1>; + }; +}; + +&audmux { + status = "okay"; +}; + +&ecspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard2_ecspi2>; + cs-gpios = <&gpio2 26 0>; + status = "okay"; +}; + +&hdmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard2_hdmi>; + ddc-i2c-bus = <&i2c2>; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard2_i2c1>; + status = "okay"; + + pcf8523: rtc@68 { + compatible = "nxp,pcf8523"; + reg = <0x68>; + }; + + sgtl5000: codec@0a { + clocks = <&clks IMX6QDL_CLK_CKO>; + compatible = "fsl,sgtl5000"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard2_sgtl5000>; + reg = <0x0a>; + VDDA-supply = <®_3p3v>; + VDDIO-supply = <®_3p3v>; + VDDD-supply = <®_1p8v>; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard2_i2c2>; + status = "okay"; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard2_i2c3>; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + hummingboard2 { + pinctrl_hog: hoggrp { + fsl,pins = < + /* + * 36 pin headers GPIO description. The pins + * numbering as following - + * + * 3.2v 5v 74 75 + * 73 72 71 70 + * 69 68 67 66 + * + * 77 78 79 76 + * 65 64 61 60 + * 53 52 51 50 + * 49 48 166 132 + * 95 94 90 91 + * GND 54 24 204 + * + * The GPIO numbers can be extracted using + * signal name from below. + * Example - + * MX6QDL_PAD_EIM_DA10__GPIO3_IO10 is + * GPIO(3,10) which is (3-1)*32+10 = gpio 74 + * + * i.e. The mapping of GPIO(X,Y) to Linux gpio + * number is : gpio number = (X-1) * 32 + Y + */ + /* DI1_PIN15 */ + MX6QDL_PAD_EIM_DA10__GPIO3_IO10 0x400130b1 + /* DI1_PIN02 */ + MX6QDL_PAD_EIM_DA11__GPIO3_IO11 0x400130b1 + /* DISP1_DATA00 */ + MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x400130b1 + /* DISP1_DATA01 */ + MX6QDL_PAD_EIM_DA8__GPIO3_IO08 0x400130b1 + /* DISP1_DATA02 */ + MX6QDL_PAD_EIM_DA7__GPIO3_IO07 0x400130b1 + /* DISP1_DATA03 */ + MX6QDL_PAD_EIM_DA6__GPIO3_IO06 0x400130b1 + /* DISP1_DATA04 */ + MX6QDL_PAD_EIM_DA5__GPIO3_IO05 0x400130b1 + /* DISP1_DATA05 */ + MX6QDL_PAD_EIM_DA4__GPIO3_IO04 0x400130b1 + /* DISP1_DATA06 */ + MX6QDL_PAD_EIM_DA3__GPIO3_IO03 0x400130b1 + /* DISP1_DATA07 */ + MX6QDL_PAD_EIM_DA2__GPIO3_IO02 0x400130b1 + /* DI1_D0_CS */ + MX6QDL_PAD_EIM_DA13__GPIO3_IO13 0x400130b1 + /* DI1_D1_CS */ + MX6QDL_PAD_EIM_DA14__GPIO3_IO14 0x400130b1 + /* DI1_PIN01 */ + MX6QDL_PAD_EIM_DA15__GPIO3_IO15 0x400130b1 + /* DI1_PIN03 */ + MX6QDL_PAD_EIM_DA12__GPIO3_IO12 0x400130b1 + /* DISP1_DATA08 */ + MX6QDL_PAD_EIM_DA1__GPIO3_IO01 0x400130b1 + /* DISP1_DATA09 */ + MX6QDL_PAD_EIM_DA0__GPIO3_IO00 0x400130b1 + /* DISP1_DATA10 */ + MX6QDL_PAD_EIM_EB1__GPIO2_IO29 0x400130b1 + /* DISP1_DATA11 */ + MX6QDL_PAD_EIM_EB0__GPIO2_IO28 0x400130b1 + /* DISP1_DATA12 */ + MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x400130b1 + /* DISP1_DATA13 */ + MX6QDL_PAD_EIM_A18__GPIO2_IO20 0x400130b1 + /* DISP1_DATA14 */ + MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x400130b1 + /* DISP1_DATA15 */ + MX6QDL_PAD_EIM_A20__GPIO2_IO18 0x400130b1 + /* DISP1_DATA16 */ + MX6QDL_PAD_EIM_A21__GPIO2_IO17 0x400130b1 + /* DISP1_DATA17 */ + MX6QDL_PAD_EIM_A22__GPIO2_IO16 0x400130b1 + /* DISP1_DATA18 */ + MX6QDL_PAD_EIM_A23__GPIO6_IO06 0x400130b1 + /* DISP1_DATA19 */ + MX6QDL_PAD_EIM_A24__GPIO5_IO04 0x400130b1 + /* DISP1_DATA20 */ + MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x400130b1 + /* DISP1_DATA21 */ + MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x400130b1 + /* DISP1_DATA22 */ + MX6QDL_PAD_EIM_D26__GPIO3_IO26 0x400130b1 + /* DISP1_DATA23 */ + MX6QDL_PAD_EIM_D27__GPIO3_IO27 0x400130b1 + /* DI1_DISP_CLK */ + MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x400130b1 + /* SPDIF_IN */ + MX6QDL_PAD_ENET_RX_ER__GPIO1_IO24 0x400130b1 + /* SPDIF_OUT */ + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x400130b1 + + /* MikroBUS GPIO pin number 10 */ + MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x400130b1 + >; + }; + + pinctrl_hummingboard2_ecspi2: hummingboard2-ecspi2grp { + fsl,pins = < + MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100b1 + MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1 + MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1 + MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x000b1 /* CS */ + >; + }; + + pinctrl_hummingboard2_gpio7_9: hummingboard2-gpio7_9 { + fsl,pins = < + MX6QDL_PAD_SD4_CMD__GPIO7_IO09 0x80000000 + >; + }; + + pinctrl_hummingboard2_hdmi: hummingboard2-hdmi { + fsl,pins = < + MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0 + >; + }; + + pinctrl_hummingboard2_i2c1: hummingboard2-i2c1 { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + >; + }; + + pinctrl_hummingboard2_i2c2: hummingboard2-i2c2 { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_hummingboard2_i2c3: hummingboard2-i2c3 { + fsl,pins = < + MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_hummingboard2_mipi: hummingboard2_mipi { + fsl,pins = < + MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x4001b8b1 + MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x4001b8b1 + MX6QDL_PAD_NANDF_CS2__CCM_CLKO2 0x130b0 + >; + }; + + pinctrl_hummingboard2_pcie_reset: hummingboard2-pcie-reset { + fsl,pins = < + MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x1b0b1 + >; + }; + + pinctrl_hummingboard2_pwm1: pwm1grp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b1 + >; + }; + + pinctrl_hummingboard2_sgtl5000: hummingboard2-sgtl5000 { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT19__AUD5_RXD 0x130b0 + MX6QDL_PAD_KEY_COL0__AUD5_TXC 0x130b0 + MX6QDL_PAD_KEY_ROW0__AUD5_TXD 0x110b0 + MX6QDL_PAD_KEY_COL1__AUD5_TXFS 0x130b0 + MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x130b0 + >; + }; + + pinctrl_hummingboard2_usbh1_vbus: hummingboard2-usbh1-vbus { + fsl,pins = <MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0>; + }; + + pinctrl_hummingboard2_usbh2_vbus: hummingboard2-usbh2-vbus { + fsl,pins = <MX6QDL_PAD_SD4_DAT5__GPIO2_IO13 0x1b0b0>; + }; + + pinctrl_hummingboard2_usbh3_vbus: hummingboard2-usbh3-vbus { + fsl,pins = <MX6QDL_PAD_SD4_CLK__GPIO7_IO10 0x1b0b0>; + }; + + pinctrl_hummingboard2_usbotg_id: hummingboard2-usbotg-id { + /* + * Similar to pinctrl_usbotg_2, but we want it + * pulled down for a fixed host connection. + */ + fsl,pins = <MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059>; + }; + + pinctrl_hummingboard2_usbotg_vbus: hummingboard2-usbotg-vbus { + fsl,pins = <MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0>; + }; + + pinctrl_hummingboard2_usdhc2_aux: hummingboard2-usdhc2-aux { + fsl,pins = < + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1f071 + MX6QDL_PAD_KEY_ROW1__SD2_VSELECT 0x1b071 + >; + }; + + pinctrl_hummingboard2_usdhc2: hummingboard2-usdhc2 { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x13059 + >; + }; + + pinctrl_hummingboard2_usdhc2_100mhz: hummingboard2-usdhc2-100mhz { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170b9 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100b9 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170b9 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170b9 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170b9 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x130b9 + >; + }; + + pinctrl_hummingboard2_usdhc2_200mhz: hummingboard2-usdhc2-200mhz { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170f9 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100f9 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170f9 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170f9 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170f9 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x130f9 + >; + }; + + pinctrl_hummingboard2_vmmc: hummingboard2-vmmc { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30 0x1b0b0 + >; + }; + + pinctrl_hummingboard2_usdhc3: hummingboard2-usdhc3 { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059 + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059 + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059 + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059 + MX6QDL_PAD_SD3_RST__SD3_RESET 0x17059 + >; + }; + + pinctrl_hummingboard2_uart3: hummingboard2-uart3 { + fsl,pins = < + MX6QDL_PAD_EIM_D25__UART3_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D24__UART3_RX_DATA 0x40013000 + >; + }; + }; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard2_pcie_reset>; + reset-gpio = <&gpio2 11 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard2_pwm1>; + status = "okay"; +}; + +&ssi1 { + status = "okay"; +}; + +&usbh1 { + disable-over-current; + status = "okay"; +}; + +&usbotg { + disable-over-current; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard2_usbotg_id>; + vbus-supply = <®_usbotg_vbus>; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = < + &pinctrl_hummingboard2_usdhc2_aux + &pinctrl_hummingboard2_usdhc2 + >; + pinctrl-1 = < + &pinctrl_hummingboard2_usdhc2_aux + &pinctrl_hummingboard2_usdhc2_100mhz + >; + pinctrl-2 = < + &pinctrl_hummingboard2_usdhc2_aux + &pinctrl_hummingboard2_usdhc2_200mhz + >; + vmmc-supply = <®_usdhc2_vmmc>; + cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard2_usdhc3>; + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_3p3v>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard2_uart3>; + status = "okay"; +}; diff --git a/images/Makefile.imx b/images/Makefile.imx index 2563779484..0677cc3560 100644 --- a/images/Makefile.imx +++ b/images/Makefile.imx @@ -249,16 +249,16 @@ CFG_start_imx6sx_sabresdb.pblx.imximg = $(board)/freescale-mx6sx-sabresdb/flash- FILE_barebox-freescale-imx6sx-sabresdb.img = start_imx6sx_sabresdb.pblx.imximg image-$(CONFIG_MACH_FREESCALE_IMX6SX_SABRESDB) += barebox-freescale-imx6sx-sabresdb.img -pblx-$(CONFIG_MACH_SOLIDRUN_MICROSOM) += start_hummingboard_microsom_i1 -CFG_start_hummingboard_microsom_i1.pblx.imximg = $(board)/solidrun-microsom/flash-header-microsom-i1.imxcfg -FILE_barebox-solidrun-hummingboard-microsom-i1.img = start_hummingboard_microsom_i1.pblx.imximg -image-$(CONFIG_MACH_SOLIDRUN_MICROSOM) += barebox-solidrun-hummingboard-microsom-i1.img - pblx-$(CONFIG_MACH_TECHNEXION_WANDBOARD) += start_imx6_wandboard CFG_start_imx6_wandboard.imx-sram-img = $(board)/technexion-wandboard/flash-header-technexion-wandboard.imxcfg FILE_barebox-imx6-wandboard.img = start_imx6_wandboard.imx-sram-img image-$(CONFIG_MACH_TECHNEXION_WANDBOARD) += barebox-imx6-wandboard.img +pblx-$(CONFIG_MACH_SOLIDRUN_MICROSOM) += start_hummingboard_microsom_i1 +CFG_start_hummingboard_microsom_i1.pblx.imximg = $(board)/solidrun-microsom/flash-header-microsom-i1.imxcfg +FILE_barebox-solidrun-hummingboard-microsom-i1.img = start_hummingboard_microsom_i1.pblx.imximg +image-$(CONFIG_MACH_SOLIDRUN_MICROSOM) += barebox-solidrun-hummingboard-microsom-i1.img + pblx-$(CONFIG_MACH_SOLIDRUN_MICROSOM) += start_hummingboard_microsom_i2 CFG_start_hummingboard_microsom_i2.pblx.imximg = $(board)/solidrun-microsom/flash-header-microsom-i2.imxcfg FILE_barebox-solidrun-hummingboard-microsom-i2.img = start_hummingboard_microsom_i2.pblx.imximg @@ -274,6 +274,26 @@ CFG_start_hummingboard_microsom_i4.pblx.imximg = $(board)/solidrun-microsom/flas FILE_barebox-solidrun-hummingboard-microsom-i4.img = start_hummingboard_microsom_i4.pblx.imximg image-$(CONFIG_MACH_SOLIDRUN_MICROSOM) += barebox-solidrun-hummingboard-microsom-i4.img +pblx-$(CONFIG_MACH_SOLIDRUN_MICROSOM) += start_hummingboard2_microsom_i1 +CFG_start_hummingboard2_microsom_i1.pblx.imximg = $(board)/solidrun-microsom/flash-header-microsom-i1.imxcfg +FILE_barebox-solidrun-hummingboard2-microsom-i1.img = start_hummingboard2_microsom_i1.pblx.imximg +image-$(CONFIG_MACH_SOLIDRUN_MICROSOM) += barebox-solidrun-hummingboard2-microsom-i1.img + +pblx-$(CONFIG_MACH_SOLIDRUN_MICROSOM) += start_hummingboard2_microsom_i2 +CFG_start_hummingboard2_microsom_i2.pblx.imximg = $(board)/solidrun-microsom/flash-header-microsom-i2.imxcfg +FILE_barebox-solidrun-hummingboard2-microsom-i2.img = start_hummingboard2_microsom_i2.pblx.imximg +image-$(CONFIG_MACH_SOLIDRUN_MICROSOM) += barebox-solidrun-hummingboard2-microsom-i2.img + +pblx-$(CONFIG_MACH_SOLIDRUN_MICROSOM) += start_hummingboard2_microsom_i2ex +CFG_start_hummingboard2_microsom_i2ex.pblx.imximg = $(board)/solidrun-microsom/flash-header-microsom-i2eX.imxcfg +FILE_barebox-solidrun-hummingboard2-microsom-i2eX.img = start_hummingboard2_microsom_i2ex.pblx.imximg +image-$(CONFIG_MACH_SOLIDRUN_MICROSOM) += barebox-solidrun-hummingboard2-microsom-i2eX.img + +pblx-$(CONFIG_MACH_SOLIDRUN_MICROSOM) += start_hummingboard2_microsom_i4 +CFG_start_hummingboard2_microsom_i4.pblx.imximg = $(board)/solidrun-microsom/flash-header-microsom-i4.imxcfg +FILE_barebox-solidrun-hummingboard2-microsom-i4.img = start_hummingboard2_microsom_i4.pblx.imximg +image-$(CONFIG_MACH_SOLIDRUN_MICROSOM) += barebox-solidrun-hummingboard2-microsom-i4.img + pblx-$(CONFIG_MACH_SOLIDRUN_MICROSOM) += start_h100_microsom_i2ex CFG_start_h100_microsom_i2ex.pblx.imximg = $(board)/solidrun-microsom/flash-header-microsom-i2eX.imxcfg FILE_barebox-auvidea-h100-microsom-i2eX.img = start_h100_microsom_i2ex.pblx.imximg |