diff options
| -rw-r--r-- | drivers/mtd/nand/Kconfig | 7 | ||||
| -rw-r--r-- | drivers/mtd/nand/Makefile | 1 | ||||
| -rw-r--r-- | drivers/mtd/nand/nand_mrvl_nfc.c | 1020 | ||||
| -rw-r--r-- | include/platform_data/mtd-nand-mrvl.h | 79 |
4 files changed, 1107 insertions, 0 deletions
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig index c345847d8f..a75540b4ec 100644 --- a/drivers/mtd/nand/Kconfig +++ b/drivers/mtd/nand/Kconfig @@ -97,6 +97,13 @@ config NAND_ORION help Support for the Orion NAND controller, present in Kirkwood SoCs. +config NAND_MRVL_NFC + bool + prompt "Marvell NAND driver" + depends on ARCH_PXA3XX + help + Support for the PXA3xx NAND controller, present in pxa3xx SoCs. + config NAND_ATMEL bool prompt "Atmel (AT91SAM9xxx) NAND driver" diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile index 02dacde962..a0b31989ff 100644 --- a/drivers/mtd/nand/Makefile +++ b/drivers/mtd/nand/Makefile @@ -11,6 +11,7 @@ obj-$(CONFIG_NAND_IMX) += nand_imx.o obj-$(CONFIG_NAND_IMX_BBM) += nand_imx_bbm.o obj-$(CONFIG_NAND_OMAP_GPMC) += nand_omap_gpmc.o nand_omap_bch_decoder.o obj-$(CONFIG_NAND_ORION) += nand_orion.o +obj-$(CONFIG_NAND_MRVL_NFC) += nand_mrvl_nfc.o obj-$(CONFIG_NAND_ATMEL) += atmel_nand.o obj-$(CONFIG_NAND_S3C24XX) += nand_s3c24xx.o pbl-$(CONFIG_NAND_S3C24XX) += nand_s3c24xx.o diff --git a/drivers/mtd/nand/nand_mrvl_nfc.c b/drivers/mtd/nand/nand_mrvl_nfc.c new file mode 100644 index 0000000000..258ff75953 --- /dev/null +++ b/drivers/mtd/nand/nand_mrvl_nfc.c @@ -0,0 +1,1020 @@ +/* + * drivers/mtd/nand/mrvl_nand.c + * + * Copyright © 2005 Intel Corporation + * Copyright © 2006 Marvell International Ltd. + * Copyright (C) 2014 Robert Jarzmik + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * See Documentation/mtd/nand/pxa3xx-nand.txt for more details. + */ +#include <common.h> + +#include <driver.h> +#include <dma/apbh-dma.h> +#include <errno.h> +#include <clock.h> +#include <init.h> +#include <io.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/nand.h> +#include <linux/types.h> +#include <linux/clk.h> +#include <linux/err.h> +#include <mach/clock.h> +#include <malloc.h> +#include <of_mtd.h> +#include <stmp-device.h> + +#include <platform_data/mtd-nand-mrvl.h> + +#define CHIP_DELAY_TIMEOUT_US 500000 +#define PAGE_CHUNK_SIZE (2048) + +/* + * Define a buffer size for the initial command that detects the flash device: + * STATUS, READID and PARAM. The largest of these is the PARAM command, + * needing 256 bytes. + */ +#define INIT_BUFFER_SIZE 256 + +/* registers and bit definitions */ +#define NDCR (0x00) /* Control register */ +#define NDTR0CS0 (0x04) /* Timing Parameter 0 for CS0 */ +#define NDTR1CS0 (0x0C) /* Timing Parameter 1 for CS0 */ +#define NDSR (0x14) /* Status Register */ +#define NDPCR (0x18) /* Page Count Register */ +#define NDBDR0 (0x1C) /* Bad Block Register 0 */ +#define NDBDR1 (0x20) /* Bad Block Register 1 */ +#define NDECCCTRL (0x28) /* ECC control */ +#define NDDB (0x40) /* Data Buffer */ +#define NDCB0 (0x48) /* Command Buffer0 */ +#define NDCB1 (0x4C) /* Command Buffer1 */ +#define NDCB2 (0x50) /* Command Buffer2 */ + +#define NDCR_SPARE_EN (0x1 << 31) +#define NDCR_ECC_EN (0x1 << 30) +#define NDCR_DMA_EN (0x1 << 29) +#define NDCR_ND_RUN (0x1 << 28) +#define NDCR_DWIDTH_C (0x1 << 27) +#define NDCR_DWIDTH_M (0x1 << 26) +#define NDCR_PAGE_SZ (0x1 << 24) +#define NDCR_NCSX (0x1 << 23) +#define NDCR_ND_MODE (0x3 << 21) +#define NDCR_NAND_MODE (0x0) +#define NDCR_CLR_PG_CNT (0x1 << 20) +#define NDCR_STOP_ON_UNCOR (0x1 << 19) +#define NDCR_RD_ID_CNT_MASK (0x7 << 16) +#define NDCR_RD_ID_CNT(x) (((x) << 16) & NDCR_RD_ID_CNT_MASK) + +#define NDCR_RA_START (0x1 << 15) +#define NDCR_PG_PER_BLK (0x1 << 14) +#define NDCR_ND_ARB_EN (0x1 << 12) +#define NDCR_INT_MASK (0xFFF) + +#define NDSR_MASK (0xfff) +#define NDSR_ERR_CNT_OFF (16) +#define NDSR_ERR_CNT_MASK (0x1f) +#define NDSR_ERR_CNT(sr) ((sr >> NDSR_ERR_CNT_OFF) & NDSR_ERR_CNT_MASK) +#define NDSR_RDY (0x1 << 12) +#define NDSR_FLASH_RDY (0x1 << 11) +#define NDSR_CS0_PAGED (0x1 << 10) +#define NDSR_CS1_PAGED (0x1 << 9) +#define NDSR_CS0_CMDD (0x1 << 8) +#define NDSR_CS1_CMDD (0x1 << 7) +#define NDSR_CS0_BBD (0x1 << 6) +#define NDSR_CS1_BBD (0x1 << 5) +#define NDSR_UNCORERR (0x1 << 4) +#define NDSR_CORERR (0x1 << 3) +#define NDSR_WRDREQ (0x1 << 2) +#define NDSR_RDDREQ (0x1 << 1) +#define NDSR_WRCMDREQ (0x1) + +#define NDCB0_LEN_OVRD (0x1 << 28) +#define NDCB0_ST_ROW_EN (0x1 << 26) +#define NDCB0_AUTO_RS (0x1 << 25) +#define NDCB0_CSEL (0x1 << 24) +#define NDCB0_EXT_CMD_TYPE_MASK (0x7 << 29) +#define NDCB0_EXT_CMD_TYPE(x) (((x) << 29) & NDCB0_EXT_CMD_TYPE_MASK) +#define NDCB0_CMD_TYPE_MASK (0x7 << 21) +#define NDCB0_CMD_TYPE(x) (((x) << 21) & NDCB0_CMD_TYPE_MASK) +#define NDCB0_NC (0x1 << 20) +#define NDCB0_DBC (0x1 << 19) +#define NDCB0_ADDR_CYC_MASK (0x7 << 16) +#define NDCB0_ADDR_CYC(x) (((x) << 16) & NDCB0_ADDR_CYC_MASK) +#define NDCB0_CMD2_MASK (0xff << 8) +#define NDCB0_CMD1_MASK (0xff) +#define NDCB0_ADDR_CYC_SHIFT (16) + +#define EXT_CMD_TYPE_DISPATCH 6 /* Command dispatch */ +#define EXT_CMD_TYPE_NAKED_RW 5 /* Naked read or Naked write */ +#define EXT_CMD_TYPE_READ 4 /* Read */ +#define EXT_CMD_TYPE_DISP_WR 4 /* Command dispatch with write */ +#define EXT_CMD_TYPE_FINAL 3 /* Final command */ +#define EXT_CMD_TYPE_LAST_RW 1 /* Last naked read/write */ +#define EXT_CMD_TYPE_MONO 0 /* Monolithic read/write */ + +/* macros for registers read/write */ +#define nand_writel(host, off, val) \ + _nand_writel(__func__, __LINE__, (host), (off), (val)) + +#define nand_writesl(host, off, buf, nbbytes) \ + writesl((host)->mmio_base + (off), buf, nbbytes) + +#define nand_readl(host, off) \ + _nand_readl(__func__, __LINE__, (host), (off)) + +#define nand_readsl(host, off, buf, nbbytes) \ + readsl((host)->mmio_base + (off), buf, nbbytes) + +struct mrvl_nand_host { + struct mtd_info mtd; + struct nand_chip chip; + struct mtd_partition *parts; + struct device_d *dev; + + /* calculated from mrvl_nand_flash data */ + unsigned int col_addr_cycles; + unsigned int row_addr_cycles; + size_t read_id_bytes; + + void __iomem *mmio_base; + + unsigned int buf_start; + unsigned int buf_count; + unsigned int buf_size; + + unsigned char *data_buff; + + int keep_config; + int ecc_strength; + int ecc_step; + + int cs; /* selected chip 0/1 */ + int use_ecc; /* use HW ECC ? */ + int use_spare; /* use spare ? */ + int flash_bbt; + + unsigned int data_size; /* data to be read from FIFO */ + unsigned int chunk_size; /* split commands chunk size */ + unsigned int oob_size; + unsigned int spare_size; + unsigned int ecc_size; + unsigned int max_bitflips; + int cmd_ongoing; + + /* cached register value */ + uint32_t reg_ndcr; + uint32_t ndtr0cs0_chip0; + uint32_t ndtr1cs0_chip0; + uint32_t ndtr0cs0_chip1; + uint32_t ndtr1cs0_chip1; + + /* generated NDCBx register values */ + uint32_t ndcb0; + uint32_t ndcb1; + uint32_t ndcb2; + uint32_t ndcb3; +}; + +static u8 bbt_pattern[] = {'M', 'V', 'B', 'b', 't', '0' }; +static u8 bbt_mirror_pattern[] = {'1', 't', 'b', 'B', 'V', 'M' }; + +static struct nand_bbt_descr bbt_main_descr = { + .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE + | NAND_BBT_2BIT | NAND_BBT_VERSION, + .offs = 8, + .len = 6, + .veroffs = 14, + .maxblocks = 8, /* Last 8 blocks in each chip */ + .pattern = bbt_pattern, +}; + +static struct nand_bbt_descr bbt_mirror_descr = { + .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE + | NAND_BBT_2BIT | NAND_BBT_VERSION, + .offs = 8, + .len = 6, + .veroffs = 14, + .maxblocks = 8, /* Last 8 blocks in each chip */ + .pattern = bbt_mirror_pattern, +}; + +static struct nand_ecclayout ecc_layout_512B_hwecc = { + .eccbytes = 6, + .eccpos = { + 8, 9, 10, 11, 12, 13, 14, 15 }, + .oobfree = { {0, 8} } +}; + +static struct nand_ecclayout ecc_layout_2KB_hwecc = { + .eccbytes = 24, + .eccpos = { + 40, 41, 42, 43, 44, 45, 46, 47, + 48, 49, 50, 51, 52, 53, 54, 55, + 56, 57, 58, 59, 60, 61, 62, 63 }, + .oobfree = { {0, 40} } +}; + +#define NDTR0_tCH(c) (min((c), 7) << 19) +#define NDTR0_tCS(c) (min((c), 7) << 16) +#define NDTR0_tWH(c) (min((c), 7) << 11) +#define NDTR0_tWP(c) (min((c), 7) << 8) +#define NDTR0_tRH(c) (min((c), 7) << 3) +#define NDTR0_tRP(c) (min((c), 7) << 0) + +#define NDTR1_tR(c) (min((c), 65535) << 16) +#define NDTR1_tWHR(c) (min((c), 15) << 4) +#define NDTR1_tAR(c) (min((c), 15) << 0) + +#define mtd_info_to_host(mtd) ((struct mrvl_nand_host *) \ + (((struct nand_chip *)((mtd)->priv))->priv)) + +static struct of_device_id mrvl_nand_dt_ids[] = { + { + .compatible = "marvell,pxa3xx-nand", + }, + {} +}; + +/* convert nano-seconds to nand flash controller clock cycles */ +static int ns2cycle(int ns, unsigned long clk_rate) +{ + int clk_mhz = clk_rate / 1000000; + + return roundup(ns * clk_mhz, 1000) / 1000; +} + +static volatile u32 _nand_readl(const char *func, const int line, + struct mrvl_nand_host *host, int off) +{ + volatile u32 val = readl((host)->mmio_base + (off)); + + dev_vdbg(host->dev, "\treadl %s:%d reg=0x%08x => 0x%08x\n", + func, line, off, val); + return val; +} + +static void _nand_writel(const char *func, const int line, + struct mrvl_nand_host *host, int off, u32 val) +{ + dev_vdbg(host->dev, "\twritel %s:%d reg=0x%08x val=0x%08x\n", + func, line, off, val); + writel(val, (host)->mmio_base + off); +} + +static struct mrvl_nand_timing timings[] = { + { 0x46ec, 10, 0, 20, 40, 30, 40, 11123, 110, 10, }, + { 0xdaec, 10, 0, 20, 40, 30, 40, 11123, 110, 10, }, + { 0xd7ec, 10, 0, 20, 40, 30, 40, 11123, 110, 10, }, + { 0xa12c, 10, 25, 15, 25, 15, 30, 25000, 60, 10, }, + { 0xb12c, 10, 25, 15, 25, 15, 30, 25000, 60, 10, }, + { 0xdc2c, 10, 25, 15, 25, 15, 30, 25000, 60, 10, }, + { 0xcc2c, 10, 25, 15, 25, 15, 30, 25000, 60, 10, }, + { 0xba20, 10, 35, 15, 25, 15, 25, 25000, 60, 10, }, + { 0x0000, 40, 80, 60, 100, 80, 100, 90000, 400, 40, }, +}; + +static void mrvl_nand_set_timing(struct mrvl_nand_host *host, bool use_default) +{ + struct mtd_info *mtd = &host->mtd; + struct mrvl_nand_timing *t; + uint32_t ndtr0, ndtr1; + u16 id; + unsigned long nand_clk = pxa_get_nandclk(); + + if (use_default) { + id = 0; + } else { + host->chip.cmdfunc(mtd, NAND_CMD_READID, 0x00, -1); + host->chip.read_buf(mtd, (unsigned char *)&id, sizeof(id)); + } + for (t = &timings[0]; t->id; t++) + if (t->id == id) + break; + ndtr0 = NDTR0_tCH(ns2cycle(t->tCH, nand_clk)) | + NDTR0_tCS(ns2cycle(t->tCS, nand_clk)) | + NDTR0_tWH(ns2cycle(t->tWH, nand_clk)) | + NDTR0_tWP(ns2cycle(t->tWP, nand_clk)) | + NDTR0_tRH(ns2cycle(t->tRH, nand_clk)) | + NDTR0_tRP(ns2cycle(t->tRP, nand_clk)); + + ndtr1 = NDTR1_tR(ns2cycle(t->tR, nand_clk)) | + NDTR1_tWHR(ns2cycle(t->tWHR, nand_clk)) | + NDTR1_tAR(ns2cycle(t->tAR, nand_clk)); + nand_writel(host, NDTR0CS0, ndtr0); + nand_writel(host, NDTR1CS0, ndtr1); +} + +static int mrvl_nand_ready(struct mtd_info *mtd) +{ + struct mrvl_nand_host *host = mtd_info_to_host(mtd); + u32 ndcr; + + ndcr = nand_readl(host, NDSR); + if (host->cs == 0) + return ndcr & NDSR_FLASH_RDY; + if (host->cs == 1) + return ndcr & NDSR_RDY; + return 0; +} + +/* + * Claims all blocks are good. + * + * In principle, this function is *only* called when the NAND Flash MTD system + * isn't allowed to keep an in-memory bad block table, so it is forced to ask + * the driver for bad block information. + * + * In fact, we permit the NAND Flash MTD system to have an in-memory BBT, so + * this function is *only* called when we take it away. + * + * Thus, this function is only called when we want *all* blocks to look good, + * so it *always* return success. + */ +static int mrvl_nand_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip) +{ + return 0; +} + +static void mrvl_nand_select_chip(struct mtd_info *mtd, int chipnr) +{ + struct mrvl_nand_host *host = mtd_info_to_host(mtd); + + if (chipnr <= 0 || chipnr >= 3 || chipnr == host->cs) + return; + host->cs = chipnr - 1; +} + +/* + * Set the data and OOB size, depending on the selected + * spare and ECC configuration. + * Only applicable to READ0, READOOB and PAGEPROG commands. + */ +static unsigned int mrvl_datasize(struct mrvl_nand_host *host) +{ + unsigned int datasize; + + datasize = host->mtd.writesize; + if (host->use_spare) { + datasize += host->spare_size; + if (!host->use_ecc) + datasize += host->ecc_size; + } + return datasize; +} + +/** + * NOTE: it is a must to set ND_RUN firstly, then write + * command buffer, otherwise, it does not work. + * We enable all the interrupt at the same time, and + * let mrvl_nand_irq to handle all logic. + */ +static void mrvl_nand_start(struct mrvl_nand_host *host) +{ + uint32_t ndcr; + + ndcr = host->reg_ndcr; + if (host->use_ecc) + ndcr |= NDCR_ECC_EN; + else + ndcr &= ~NDCR_ECC_EN; + + ndcr &= ~NDCR_DMA_EN; + + if (host->use_spare) + ndcr |= NDCR_SPARE_EN; + else + ndcr &= ~NDCR_SPARE_EN; + + ndcr &= ~NDCR_ND_RUN; + ndcr |= NDCR_INT_MASK; + + /* clear status bits and run */ + nand_writel(host, NDCR, ndcr); + nand_writel(host, NDSR, NDSR_MASK); + nand_writel(host, NDCR, ndcr | NDCR_ND_RUN); + + if (wait_on_timeout(host->chip.chip_delay * USECOND, + nand_readl(host, NDSR) & NDSR_WRCMDREQ)) { + dev_err(host->dev, "Waiting for command request failed\n"); + } else { + /* + * Writing 12 bytes to NDBC0 sets NDBC0, NDBC1 and NDBC2 ! + */ + nand_writel(host, NDSR, NDSR_WRCMDREQ); + nand_writel(host, NDCB0, host->ndcb0); + nand_writel(host, NDCB0, host->ndcb1); + nand_writel(host, NDCB0, host->ndcb2); + } +} + +static void disable_int(struct mrvl_nand_host *host, uint32_t int_mask) +{ + uint32_t ndcr; + + ndcr = nand_readl(host, NDCR); + nand_writel(host, NDCR, ndcr | int_mask); +} + +static inline int is_buf_blank(uint8_t *buf, size_t len) +{ + for (; len > 0; len--) + if (*buf++ != 0xff) + return 0; + return 1; +} + +static void set_command_address(struct mrvl_nand_host *host, + unsigned int page_size, uint16_t column, int page_addr) +{ + /* small page addr setting */ + if (page_size < PAGE_CHUNK_SIZE) { + host->ndcb1 = ((page_addr & 0xFFFFFF) << 8) + | (column & 0xFF); + + host->ndcb2 = 0; + } else { + host->ndcb1 = ((page_addr & 0xFFFF) << 16) + | (column & 0xFFFF); + + if (page_addr & 0xFF0000) + host->ndcb2 = (page_addr & 0xFF0000) >> 16; + else + host->ndcb2 = 0; + } +} + +static void prepare_start_command(struct mrvl_nand_host *host, int command) +{ + /* reset data and oob column point to handle data */ + host->buf_start = 0; + host->buf_count = 0; + host->oob_size = 0; + host->use_ecc = 0; + host->use_spare = 1; + host->ndcb3 = 0; + host->cmd_ongoing = command; + + switch (command) { + case NAND_CMD_SEQIN: + /* + * This command is a no-op, as merged with PROGPAGE. + */ + break; + case NAND_CMD_READOOB: + host->data_size = mrvl_datasize(host); + break; + case NAND_CMD_READ0: + host->use_ecc = 1; + host->data_size = mrvl_datasize(host); + break; + case NAND_CMD_PAGEPROG: + host->use_ecc = 1; + host->data_size = mrvl_datasize(host); + break; + case NAND_CMD_PARAM: + host->use_spare = 0; + break; + default: + host->ndcb1 = 0; + host->ndcb2 = 0; + break; + } + + /* + * If we are about to issue a read command, or about to set + * the write address, then clean the data buffer. + */ + if (command == NAND_CMD_READ0 || + command == NAND_CMD_READOOB || + command == NAND_CMD_SEQIN) { + host->buf_count = host->mtd.writesize + host->mtd.oobsize; + memset(host->data_buff, 0xFF, host->buf_count); + } + +} + +/** + * prepare_set_command - Prepare a NAND command + * + * Prepare data for a NAND command. If the command will not be executed, but + * instead merged into a "bi-command", returns 0. + * + * Returns if the command should be launched on the NFC + */ +static int prepare_set_command(struct mrvl_nand_host *host, int command, + int ext_cmd_type, uint16_t column, int page_addr) +{ + int addr_cycle, exec_cmd; + struct mtd_info *mtd; + + mtd = &host->mtd; + exec_cmd = 1; + + if (host->cs != 0) + host->ndcb0 = NDCB0_CSEL; + else + host->ndcb0 = 0; + + addr_cycle = NDCB0_ADDR_CYC(host->row_addr_cycles + + host->col_addr_cycles); + switch (command) { + case NAND_CMD_READOOB: + case NAND_CMD_READ0: + host->ndcb0 |= NDCB0_CMD_TYPE(0) + | addr_cycle + | NAND_CMD_READ0; + + if (command == NAND_CMD_READOOB) + host->buf_start = column + mtd->writesize; + else + host->buf_start = column; + + /* + * Multiple page read needs an 'extended command type' field, + * which is either naked-read or last-read according to the + * state. + */ + if (mtd->writesize == PAGE_CHUNK_SIZE) { + host->ndcb0 |= NDCB0_DBC | (NAND_CMD_READSTART << 8); + } else if (mtd->writesize > PAGE_CHUNK_SIZE) { + host->ndcb0 |= NDCB0_DBC | (NAND_CMD_READSTART << 8) + | NDCB0_LEN_OVRD + | NDCB0_EXT_CMD_TYPE(ext_cmd_type); + host->ndcb3 = host->chunk_size + + host->oob_size; + } + + set_command_address(host, mtd->writesize, column, page_addr); + break; + + case NAND_CMD_SEQIN: + host->buf_start = column; + set_command_address(host, mtd->writesize, 0, page_addr); + /* Data transfer will occur in write_page */ + host->data_size = 0; + exec_cmd = 0; + break; + + case NAND_CMD_PAGEPROG: + host->ndcb0 |= NDCB0_CMD_TYPE(0x1) + | NDCB0_DBC + | (NAND_CMD_PAGEPROG << 8) + | NAND_CMD_SEQIN + | addr_cycle; + break; + + case NAND_CMD_PARAM: + host->buf_count = 256; + host->ndcb0 |= NDCB0_CMD_TYPE(0) + | NDCB0_ADDR_CYC(1) + | NDCB0_LEN_OVRD + | command; + host->ndcb1 = (column & 0xFF); + host->ndcb3 = 256; + host->data_size = 256; + break; + + case NAND_CMD_READID: + host->buf_count = host->read_id_bytes; + host->ndcb0 |= NDCB0_CMD_TYPE(3) + | NDCB0_ADDR_CYC(1) + | command; + host->ndcb1 = (column & 0xFF); + + host->data_size = 8; + break; + case NAND_CMD_STATUS: + host->buf_count = 1; + host->ndcb0 |= NDCB0_CMD_TYPE(4) + | NDCB0_ADDR_CYC(1) + | command; + + host->data_size = 8; + break; + + case NAND_CMD_ERASE1: + host->ndcb0 |= NDCB0_CMD_TYPE(2) + | NDCB0_ADDR_CYC(3) + | NDCB0_DBC + | (NAND_CMD_ERASE2 << 8) + | NAND_CMD_ERASE1; + host->ndcb1 = page_addr; + host->ndcb2 = 0; + + break; + case NAND_CMD_RESET: + host->ndcb0 |= NDCB0_CMD_TYPE(5) + | command; + break; + + case NAND_CMD_ERASE2: + exec_cmd = 0; + break; + + default: + exec_cmd = 0; + dev_err(host->dev, "non-supported command %x\n", + command); + break; + } + + return exec_cmd; +} + +static void mrvl_data_stage(struct mrvl_nand_host *host) +{ + unsigned int i, mask = NDSR_RDDREQ | NDSR_WRDREQ; + u32 *src, ndsr; + + dev_dbg(host->dev, "%s() ndsr=0x%08x\n", __func__, + nand_readl(host, NDSR)); + if (!host->data_size) + return; + + wait_on_timeout(host->chip.chip_delay * USECOND, + nand_readl(host, NDSR) & mask); + if (!(nand_readl(host, NDSR) & mask)) { + dev_err(host->dev, "Timeout waiting for data ndsr=0x%08x\n", + nand_readl(host, NDSR)); + return; + } + + ndsr = nand_readl(host, NDSR); + mask &= ndsr; + src = (u32 *)host->data_buff; + + for (i = 0; i < host->data_size; i += 4) { + if (ndsr & NDSR_RDDREQ) + *src++ = nand_readl(host, NDDB); + if (ndsr & NDSR_WRDREQ) + nand_writel(host, NDDB, *src++); + } + + host->data_size = 0; + nand_writel(host, NDSR, mask); +} + +static void mrvl_nand_wait_cmd_done(struct mrvl_nand_host *host, + unsigned command) +{ + unsigned int mask; + static unsigned int nb_done; + + if (host->cs == 0) + mask = NDSR_CS0_CMDD; + else + mask = NDSR_CS1_CMDD; + wait_on_timeout(host->chip.chip_delay * USECOND, + (nand_readl(host, NDSR) & mask) == mask); + if ((nand_readl(host, NDSR) & mask) != mask) { + dev_err(host->dev, "Waiting end of command %dth %d timeout, ndsr=0x%08x ndcr=0x%08x\n", + nb_done++, command, nand_readl(host, NDSR), + nand_readl(host, NDCR)); + } +} + +static void mrvl_nand_cmdfunc(struct mtd_info *mtd, unsigned command, + int column, int page_addr) +{ + struct mrvl_nand_host *host = mtd_info_to_host(mtd); + + /* + * if this is a x16 device ,then convert the input + * "byte" address into a "word" address appropriate + * for indexing a word-oriented device + */ + dev_dbg(host->dev, "%s(cmd=%d, col=%d, page=%d)\n", __func__, + command, column, page_addr); + if ((host->reg_ndcr & NDCR_DWIDTH_M) && (command != NAND_CMD_READID)) + column /= 2; + + prepare_start_command(host, command); + if (prepare_set_command(host, command, 0, column, page_addr)) { + mrvl_nand_start(host); + mrvl_data_stage(host); + mrvl_nand_wait_cmd_done(host, command); + } +} + +/** + * mrvl_nand_write_page_hwecc - prepare page for write + * + * Fills in the host->data_buff. The actual write will be done by the PAGEPROG + * command, which will trigger a mrvl_data_stage(). + * + * Returns 0 + */ +static int mrvl_nand_write_page_hwecc(struct mtd_info *mtd, + struct nand_chip *chip, const uint8_t *buf, int oob_required) +{ + struct mrvl_nand_host *host = mtd_info_to_host(mtd); + + memcpy(host->data_buff, buf, mtd->writesize); + if (oob_required) + memcpy(host->data_buff + mtd->writesize, chip->oob_poi, + mtd->oobsize); + else + memset(host->data_buff + mtd->writesize, 0, mtd->oobsize); + dev_dbg(host->dev, "%s(buf=%p, oob_required=%d) => 0\n", + __func__, buf, oob_required); + return 0; +} + +static int mrvl_nand_read_page_hwecc(struct mtd_info *mtd, + struct nand_chip *chip, uint8_t *buf, int oob_required, + int page) +{ + struct mrvl_nand_host *host = mtd_info_to_host(mtd); + u32 ndsr; + int ret = 0; + + chip->read_buf(mtd, buf, mtd->writesize); + chip->read_buf(mtd, chip->oob_poi, mtd->oobsize); + ndsr = nand_readl(host, NDSR); + + if (ndsr & NDSR_UNCORERR) { + if (is_buf_blank(buf, mtd->writesize)) + ret = 0; + else + ret = -EBADMSG; + } + if (ndsr & NDSR_CORERR) + ret = 1; + dev_dbg(host->dev, "%s(buf=%p, page=%d, oob_required=%d) => %d\n", + __func__, buf, page, oob_required, ret); + return ret; +} + +static void mrvl_nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len) +{ + struct mrvl_nand_host *host = mtd_info_to_host(mtd); + int xfer; + + xfer = min_t(int, len, host->buf_count); + memcpy(buf, host->data_buff + host->buf_start, xfer); + host->buf_start += xfer; + host->buf_count -= xfer; +} + +static uint8_t mrvl_nand_read_byte(struct mtd_info *mtd) +{ + uint8_t ret; + + mrvl_nand_read_buf(mtd, (uint8_t *)&ret, sizeof(ret)); + return ret; +} + +static u16 mrvl_nand_read_word(struct mtd_info *mtd) +{ + u16 ret; + + mrvl_nand_read_buf(mtd, (uint8_t *)&ret, sizeof(ret)); + return ret; +} + +static void mrvl_nand_write_buf(struct mtd_info *mtd, + const uint8_t *buf, int len) +{ + struct mrvl_nand_host *host = mtd_info_to_host(mtd); + + memcpy(host->data_buff + host->buf_start, buf, len); + host->buf_start += len; + host->buf_count -= len; +} + +static void mrvl_nand_config_flash(struct mrvl_nand_host *host) +{ + struct nand_chip *chip = &host->chip; + struct mtd_info *mtd = &host->mtd; + uint32_t ndcr = host->reg_ndcr; + + /* calculate flash information */ + host->read_id_bytes = (mtd->writesize == 2048) ? 4 : 2; + + /* calculate addressing information */ + host->col_addr_cycles = (mtd->writesize == 2048) ? 2 : 1; + if ((mtd->size >> chip->page_shift) > 65536) + host->row_addr_cycles = 3; + else + host->row_addr_cycles = 2; + + ndcr |= NDCR_ND_ARB_EN; + ndcr |= (host->col_addr_cycles == 2) ? NDCR_RA_START : 0; + ndcr |= ((mtd->erasesize / mtd->writesize) == 64) ? NDCR_PG_PER_BLK : 0; + ndcr |= (mtd->writesize == 2048) ? NDCR_PAGE_SZ : 0; + + ndcr &= ~NDCR_RD_ID_CNT_MASK; + ndcr |= NDCR_RD_ID_CNT(host->read_id_bytes); + ndcr |= NDCR_SPARE_EN; /* enable spare by default */ + ndcr &= ~NDCR_DMA_EN; + + if (chip->options & NAND_BUSWIDTH_16) + ndcr |= NDCR_DWIDTH_M | NDCR_DWIDTH_C; + else + ndcr &= ~(NDCR_DWIDTH_M | NDCR_DWIDTH_C); + + host->reg_ndcr = ndcr; +} + +static int pxa_ecc_init(struct mrvl_nand_host *host, + struct nand_ecc_ctrl *ecc, + int strength, int ecc_stepsize, int page_size) +{ + if (strength == 1 && ecc_stepsize == 512 && page_size == 2048) { + host->chunk_size = 2048; + host->spare_size = 40; + host->ecc_size = 24; + ecc->mode = NAND_ECC_HW; + ecc->size = 512; + ecc->strength = 1; + ecc->layout = &ecc_layout_2KB_hwecc; + + } else if (strength == 1 && ecc_stepsize == 512 && page_size == 512) { + host->chunk_size = 512; + host->spare_size = 8; + host->ecc_size = 8; + ecc->mode = NAND_ECC_HW; + ecc->size = 512; + ecc->layout = &ecc_layout_512B_hwecc; + ecc->strength = 1; + } else { + dev_err(host->dev, + "ECC strength %d at page size %d is not supported\n", + strength, page_size); + return -ENODEV; + } + + dev_info(host->dev, "ECC strength %d, ECC step size %d\n", + ecc->strength, ecc->size); + return 0; +} + +static int mrvl_nand_scan(struct mtd_info *mtd) +{ + struct nand_chip *chip = mtd->priv; + struct mrvl_nand_host *host = chip->priv; + int ret; + unsigned int ndcr; + uint16_t ecc_strength = host->ecc_strength; + uint16_t ecc_step = host->ecc_step; + + host->read_id_bytes = 4; + ndcr = NDCR_ND_ARB_EN | NDCR_SPARE_EN; + ndcr |= NDCR_RD_ID_CNT(host->read_id_bytes); + host->reg_ndcr = ndcr; + + mrvl_nand_set_timing(host, true); + if (nand_scan_ident(mtd, 1, NULL)) { + host->reg_ndcr |= NDCR_DWIDTH_M | NDCR_DWIDTH_C; + if (nand_scan_ident(mtd, 1, NULL)) + return -ENODEV; + } + mrvl_nand_config_flash(host); + mrvl_nand_set_timing(host, false); + if (host->flash_bbt) { + /* + * We'll use a bad block table stored in-flash and don't + * allow writing the bad block marker to the flash. + */ + chip->bbt_options |= NAND_BBT_USE_FLASH | + NAND_BBT_NO_OOB_BBM; + chip->bbt_td = &bbt_main_descr; + chip->bbt_md = &bbt_mirror_descr; + } + + /* + * If the page size is bigger than the FIFO size, let's check + * we are given the right variant and then switch to the extended + * (aka split) command handling, + */ + if (mtd->writesize > PAGE_CHUNK_SIZE) { + dev_err(host->dev, + "unsupported page size on this variant\n"); + return -ENODEV; + } + + /* Set default ECC strength requirements on non-ONFI devices */ + if (ecc_strength < 1 && ecc_step < 1) { + ecc_strength = 1; + ecc_step = 512; + } + + ret = pxa_ecc_init(host, &chip->ecc, ecc_strength, + ecc_step, mtd->writesize); + if (ret) + return ret; + mtd->oobsize = host->spare_size + host->ecc_size; + + /* allocate the real data + oob buffer */ + host->buf_size = mtd->writesize + mtd->oobsize; + host->data_buff = xmalloc(host->buf_size); + + return nand_scan_tail(mtd); +} + +static struct mrvl_nand_host *alloc_nand_resource(struct device_d *dev) +{ + struct mrvl_nand_platform_data *pdata; + struct mrvl_nand_host *host; + struct nand_chip *chip = NULL; + struct mtd_info *mtd; + + pdata = dev->platform_data; + host = xzalloc(sizeof(*host)); + host->cs = 0; + mtd = &host->mtd; + mtd->priv = &host->chip; + mtd->parent = dev; + mtd->name = "mrvl_nand"; + + chip = &host->chip; + chip->read_byte = mrvl_nand_read_byte; + chip->read_word = mrvl_nand_read_word; + chip->ecc.read_page = mrvl_nand_read_page_hwecc; + chip->ecc.write_page = mrvl_nand_write_page_hwecc; + chip->dev_ready = mrvl_nand_ready; + chip->select_chip = mrvl_nand_select_chip; + chip->block_bad = mrvl_nand_block_bad; + chip->read_buf = mrvl_nand_read_buf; + chip->write_buf = mrvl_nand_write_buf; + chip->options |= NAND_NO_SUBPAGE_WRITE; + chip->cmdfunc = mrvl_nand_cmdfunc; + chip->priv = host; + chip->chip_delay = CHIP_DELAY_TIMEOUT_US; + + host->dev = dev; + host->mmio_base = dev_request_mem_region(dev, 0); + if (IS_ERR(host->mmio_base)) { + free(host); + return host->mmio_base; + } + if (pdata) { + host->keep_config = pdata->keep_config; + host->flash_bbt = pdata->flash_bbt; + host->ecc_strength = pdata->ecc_strength; + host->ecc_step = pdata->ecc_step_size; + } + + /* Allocate a buffer to allow flash detection */ + host->buf_size = INIT_BUFFER_SIZE; + host->data_buff = xmalloc(host->buf_size); + + /* initialize all interrupts to be disabled */ + disable_int(host, NDSR_MASK); + return host; +} + +static int mrvl_nand_probe_dt(struct mrvl_nand_host *host) +{ + struct device_node *np = host->dev->device_node; + + if (of_get_property(np, "marvell,nand-keep-config", NULL)) + host->keep_config = 1; + of_property_read_u32(np, "num-cs", &host->cs); + if (of_get_nand_on_flash_bbt(np)) + host->flash_bbt = 1; + + return 0; +} + +static int mrvl_nand_probe(struct device_d *dev) +{ + struct mrvl_nand_host *host; + int ret; + + host = alloc_nand_resource(dev); + if (IS_ERR(host)) { + dev_err(dev, "alloc nand resource failed\n"); + return PTR_ERR(host); + } + + ret = mrvl_nand_probe_dt(host); + if (ret) + return ret; + + host->chip.controller = &host->chip.hwcontrol; + ret = mrvl_nand_scan(&host->mtd); + if (ret) { + dev_warn(dev, "failed to scan nand at cs %d\n", + host->cs); + return -ENODEV; + } + + ret = add_mtd_nand_device(&host->mtd, "nand"); + return ret; +} + +static struct driver_d mrvl_nand_driver = { + .name = "mrvl_nand", + .probe = mrvl_nand_probe, + .of_compatible = DRV_OF_COMPAT(mrvl_nand_dt_ids), +}; +device_platform_driver(mrvl_nand_driver); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Marvell NAND controller driver"); diff --git a/include/platform_data/mtd-nand-mrvl.h b/include/platform_data/mtd-nand-mrvl.h new file mode 100644 index 0000000000..c8ef6a1eea --- /dev/null +++ b/include/platform_data/mtd-nand-mrvl.h @@ -0,0 +1,79 @@ +/* + * Copyright (C) 2014 Robert Jarzmik + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Taken from linux kernel mostly. + */ +#ifndef __MRVL_NAND_H +#define __MRVL_NAND_H + +struct mrvl_nand_timing { + uint16_t id; /* NAND id code (READID) */ + unsigned int tCH; /* Enable signal hold time */ + unsigned int tCS; /* Enable signal setup time */ + unsigned int tWH; /* ND_nWE high duration */ + unsigned int tWP; /* ND_nWE pulse time */ + unsigned int tRH; /* ND_nRE high duration */ + unsigned int tRP; /* ND_nRE pulse width */ + unsigned int tR; /* ND_nWE high to ND_nRE low for read */ + unsigned int tWHR; /* ND_nWE high to ND_nRE low for status read */ + unsigned int tAR; /* ND_ALE low to ND_nRE low delay */ +}; + +struct mrvl_nand_flash { + char *name; + uint32_t chip_id; + unsigned int page_per_block; /* Pages per block (PG_PER_BLK) */ + unsigned int page_size; /* Page size in bytes (PAGE_SZ) */ + unsigned int flash_width; /* Flash memory width (DWIDTH_M) */ + unsigned int dfc_width; /* Flash controller width (DWIDTH_C) */ + unsigned int num_blocks; /* Number of physical blocks in Flash */ + + struct mrvl_nand_timing *timing; /* NAND Flash timing */ +}; + +/* + * Current pxa3xx_nand controller has two chip select which + * both be workable. + * + * Notice should be taken that: + * When you want to use this feature, you should not enable the + * keep configuration feature, for two chip select could be + * attached with different nand chip. The different page size + * and timing requirement make the keep configuration impossible. + */ + +/* The max num of chip select current support */ +#define NUM_CHIP_SELECT (2) +struct mrvl_nand_platform_data { + /* the data flash bus is shared between the Static Memory + * Controller and the Data Flash Controller, the arbiter + * controls the ownership of the bus + */ + int dwidth_c; + int dwidth_m; + + /* allow platform code to keep OBM/bootloader defined NFC config */ + int keep_config; + + /* indicate how many chip selects will be used */ + int num_cs; + + /* use an flash-based bad block table */ + bool flash_bbt; + + /* requested ECC strength and ECC step size */ + int ecc_strength, ecc_step_size; + + const struct mtd_partition *parts[NUM_CHIP_SELECT]; + unsigned int nr_parts[NUM_CHIP_SELECT]; + + const struct mrvl_nand_flash *flash; + size_t num_flash; +}; + +extern void mrvl_set_nand_info(struct mrvl_nand_platform_data *info); +#endif /* __MRVL_NAND_H */ |