diff options
1123 files changed, 49917 insertions, 6499 deletions
diff --git a/Documentation/filesystems/pstore.rst b/Documentation/filesystems/pstore.rst index 22e89b3f1f..b8c2cb825c 100644 --- a/Documentation/filesystems/pstore.rst +++ b/Documentation/filesystems/pstore.rst @@ -1,17 +1,17 @@ .. index:: pstore (filesystem) -pstore filesystem with RAM backend (RAMOOPS) -============================================ +*pstore* filesystem with RAM backend (RAMOOPS) +============================================== -Barebox supports the pstore filesystem known from the kernel. The main backend +Barebox supports the *pstore* filesystem known from the kernel. The main backend implementation is RAM. All other backends are currently not implemented by Barebox. -pstore is a filesystem to store kernel log or kernel panic messages. These +*pstore* is a filesystem to store kernel log or kernel panic messages. These messages are stored by the kernel in a specified RAM area which is never overwritten by any user. This data can be accessed after a reboot through -/pstore in Barebox or the kernel. The pstore filesystem is automatically mounted -at boot: +``/pstore`` in Barebox or the kernel. The *pstore* filesystem is automatically +mounted at boot: .. code-block:: none @@ -19,7 +19,7 @@ at boot: none on /dev type devfs none on /pstore type pstore -pstore may add additional warnings during boot due to wrong ECCs (no data +*pstore* may add additional warnings during boot due to wrong ECCs (no data written): .. code-block:: none @@ -40,44 +40,44 @@ written): pstore: Registered ramoops as persistent store backend ramoops: attached 0x200000@0x1fdf4000, ecc: 16/0 -To use pstore/RAMOOPS both Barebox and Kernel have to be compiled with pstore +To use *pstore/RAMOOPS* both Barebox and Kernel have to be compiled with *pstore* and RAM backend support. The kernel receives the parameters describing the -layout over the kernel command line. These parameters are automatically -generated by Barebox. You can change these parameters in Barebox menuconfig. The -RAMOOPS parameters for the Kernel are stored in the variable -global.linux.bootargs.ramoops. +layout via devicetree or - as a fallback - over the kernel command line. +To ensure both worlds are using the same memory layout, the required +configuration data for the kernel is generated on-the-fly prior booting a kernel. +For the devicetree use case Barebox adapts the kernel's devicetree, for the +kernel command line fallback the variable ``global.linux.bootargs.ramoops`` is +created and its content used to build the kernel command line. -To see where the RAMOOPS area is located, you can execute iomem in Barebox. The -RAMOOPS area is listed as 'persistent ram': +You can adapt the *pstore* parameters in Barebox menuconfig. + +To see where the RAMOOPS area is located, you can execute the ``iomem`` command +in the Barebox shell. The RAMOOPS area is listed as 'persistent ram': .. code-block:: none 0x10000000 - 0x1fffffff (size 0x10000000) ram0 - 0x17e7c0c0 - 0x1fcf817f (size 0x07e7c0c0) malloc space - 0x1fcf8180 - 0x1fcfffff (size 0x00007e80) board data - 0x1fd00000 - 0x1fd6eeff (size 0x0006ef00) barebox - 0x1fd6ef00 - 0x1fd88dff (size 0x00019f00) barebox data - 0x1fd88e00 - 0x1fd8c3db (size 0x000035dc) bss - 0x1fdf4000 - 0x1fe13fff (size 0x00020000) persistent ram - 0x1fe14000 - 0x1fe33fff (size 0x00020000) persistent ram - 0x1fe34000 - 0x1fe53fff (size 0x00020000) persistent ram - 0x1fe54000 - 0x1fe73fff (size 0x00020000) persistent ram - 0x1fe74000 - 0x1fe93fff (size 0x00020000) persistent ram - 0x1fe94000 - 0x1feb3fff (size 0x00020000) persistent ram - 0x1feb4000 - 0x1fed3fff (size 0x00020000) persistent ram - 0x1fed4000 - 0x1fef3fff (size 0x00020000) persistent ram - 0x1fef4000 - 0x1ff13fff (size 0x00020000) persistent ram - 0x1ff14000 - 0x1ff33fff (size 0x00020000) persistent ram - 0x1ff34000 - 0x1ff53fff (size 0x00020000) persistent ram - 0x1ff54000 - 0x1ff73fff (size 0x00020000) persistent ram - 0x1ff74000 - 0x1ff93fff (size 0x00020000) persistent ram - 0x1ff94000 - 0x1ffb3fff (size 0x00020000) persistent ram - 0x1ffb4000 - 0x1ffd3fff (size 0x00020000) persistent ram - 0x1ffd4000 - 0x1fff3fff (size 0x00020000) persistent ram - 0x1fff4000 - 0x1fff7fff (size 0x00004000) ttb - 0x1fff8000 - 0x1fffffff (size 0x00008000) stack + 0x247f59c0 - 0x2fbf59bf (size 0x0b400000) malloc space + 0x2fbf59c0 - 0x2fbffffe (size 0x0000a63f) board data + 0x2fc00000 - 0x2fc8619f (size 0x000861a0) barebox + 0x2fc861a0 - 0x2fca35ef (size 0x0001d450) barebox data + 0x2fca35f0 - 0x2fca9007 (size 0x00005a18) bss + 0x2fdd4000 - 0x2fdf3fff (size 0x00020000) ramoops:dump(0/4) + 0x2fdf4000 - 0x2fe13fff (size 0x00020000) ramoops:dump(1/4) + 0x2fe14000 - 0x2fe33fff (size 0x00020000) ramoops:dump(2/4) + 0x2fe34000 - 0x2fe53fff (size 0x00020000) ramoops:dump(3/4) + 0x2fe54000 - 0x2fe73fff (size 0x00020000) ramoops:dump(4/4) + 0x2fe74000 - 0x2fe93fff (size 0x00020000) ramoops:console + 0x2fe94000 - 0x2feb3fff (size 0x00020000) ramoops:ftrace + 0x2feb4000 - 0x2fed3fff (size 0x00020000) ramoops:pmsg + 0x2fee4000 - 0x2fee7fff (size 0x00004000) ttb + 0x2fee8000 - 0x2feeffff (size 0x00008000) stack All pstore files that could be found are added to the /pstore directory. This is a read-only filesystem. If you disable the Kconfig option FS_PSTORE_RAMOOPS_RO, the RAMOOPS area is reset and its ECC recalculated. But that does not allow any writes from Barebox into that area. + +If the menu entry ``FS_PSTORE_CONSOLE`` is enabled, Barebox itself will add all +its own console output to the *ramoops:console* part, which enables the regular +userland later on to have access to the bootloaders output. @@ -6,12 +6,12 @@ mainmenu "Barebox/$(ARCH) $(KERNELVERSION) Configuration" source "arch/$(SRCARCH)/Kconfig" -source common/Kconfig -source commands/Kconfig -source net/Kconfig -source drivers/Kconfig -source fs/Kconfig -source lib/Kconfig -source crypto/Kconfig -source firmware/Kconfig +source "common/Kconfig" +source "commands/Kconfig" +source "net/Kconfig" +source "drivers/Kconfig" +source "fs/Kconfig" +source "lib/Kconfig" +source "crypto/Kconfig" +source "firmware/Kconfig" source "scripts/Kconfig" @@ -1,5 +1,5 @@ VERSION = 2019 -PATCHLEVEL = 03 +PATCHLEVEL = 04 SUBLEVEL = 0 EXTRAVERSION = NAME = None diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 9d3f5b2ca7..a683c9c866 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -113,6 +113,15 @@ config ARCH_IMX select WATCHDOG_IMX_RESET_SOURCE select HAS_DEBUG_LL +config ARCH_LAYERSCAPE + bool "NXP Layerscape based" + select GPIOLIB + select HAS_DEBUG_LL + select HAVE_PBL_MULTI_IMAGES + select COMMON_CLK + select CLKDEV_LOOKUP + select COMMON_CLK_OF_PROVIDER + config ARCH_MVEBU bool "Marvell EBU platforms" select COMMON_CLK @@ -198,6 +207,16 @@ config ARCH_S3C64xx select CPU_V6 select GENERIC_GPIO +config ARCH_STM32MP1 + bool "ST stm32mp1xx" + select CPU_V7 + select HAVE_PBL_MULTI_IMAGES + select CLKDEV_LOOKUP + select COMMON_CLK + select COMMON_CLK_OF_PROVIDER + select HAS_DEBUG_LL + select HAVE_CLK + config ARCH_VERSATILE bool "ARM Versatile boards (ARM926EJ-S)" select GPIOLIB @@ -266,31 +285,33 @@ config ARCH_QEMU endchoice -source arch/arm/cpu/Kconfig -source arch/arm/mach-at91/Kconfig -source arch/arm/mach-bcm283x/Kconfig -source arch/arm/mach-clps711x/Kconfig -source arch/arm/mach-davinci/Kconfig -source arch/arm/mach-digic/Kconfig -source arch/arm/mach-ep93xx/Kconfig -source arch/arm/mach-highbank/Kconfig -source arch/arm/mach-imx/Kconfig -source arch/arm/mach-mxs/Kconfig -source arch/arm/mach-mvebu/Kconfig -source arch/arm/mach-netx/Kconfig -source arch/arm/mach-nomadik/Kconfig -source arch/arm/mach-omap/Kconfig -source arch/arm/mach-pxa/Kconfig -source arch/arm/mach-rockchip/Kconfig -source arch/arm/mach-samsung/Kconfig -source arch/arm/mach-socfpga/Kconfig -source arch/arm/mach-versatile/Kconfig -source arch/arm/mach-vexpress/Kconfig -source arch/arm/mach-tegra/Kconfig -source arch/arm/mach-uemd/Kconfig -source arch/arm/mach-zynq/Kconfig -source arch/arm/mach-qemu/Kconfig -source arch/arm/mach-zynqmp/Kconfig +source "arch/arm/cpu/Kconfig" +source "arch/arm/mach-at91/Kconfig" +source "arch/arm/mach-bcm283x/Kconfig" +source "arch/arm/mach-clps711x/Kconfig" +source "arch/arm/mach-davinci/Kconfig" +source "arch/arm/mach-digic/Kconfig" +source "arch/arm/mach-ep93xx/Kconfig" +source "arch/arm/mach-highbank/Kconfig" +source "arch/arm/mach-imx/Kconfig" +source "arch/arm/mach-layerscape/Kconfig" +source "arch/arm/mach-mxs/Kconfig" +source "arch/arm/mach-mvebu/Kconfig" +source "arch/arm/mach-netx/Kconfig" +source "arch/arm/mach-nomadik/Kconfig" +source "arch/arm/mach-omap/Kconfig" +source "arch/arm/mach-pxa/Kconfig" +source "arch/arm/mach-rockchip/Kconfig" +source "arch/arm/mach-samsung/Kconfig" +source "arch/arm/mach-socfpga/Kconfig" +source "arch/arm/mach-stm32mp1/Kconfig" +source "arch/arm/mach-versatile/Kconfig" +source "arch/arm/mach-vexpress/Kconfig" +source "arch/arm/mach-tegra/Kconfig" +source "arch/arm/mach-uemd/Kconfig" +source "arch/arm/mach-zynq/Kconfig" +source "arch/arm/mach-qemu/Kconfig" +source "arch/arm/mach-zynqmp/Kconfig" config ARM_ASM_UNIFIED bool diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 0ce208128d..0daaff2a07 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -87,6 +87,7 @@ machine-$(CONFIG_ARCH_DIGIC) := digic machine-$(CONFIG_ARCH_EP93XX) := ep93xx machine-$(CONFIG_ARCH_HIGHBANK) := highbank machine-$(CONFIG_ARCH_IMX) := imx +machine-$(CONFIG_ARCH_LAYERSCAPE) := layerscape machine-$(CONFIG_ARCH_MXS) := mxs machine-$(CONFIG_ARCH_MVEBU) := mvebu machine-$(CONFIG_ARCH_NOMADIK) := nomadik @@ -96,6 +97,7 @@ machine-$(CONFIG_ARCH_PXA) := pxa machine-$(CONFIG_ARCH_ROCKCHIP) := rockchip machine-$(CONFIG_ARCH_SAMSUNG) := samsung machine-$(CONFIG_ARCH_SOCFPGA) := socfpga +machine-$(CONFIG_ARCH_STM32MP1) := stm32mp1 machine-$(CONFIG_ARCH_VERSATILE) := versatile machine-$(CONFIG_ARCH_VEXPRESS) := vexpress machine-$(CONFIG_ARCH_TEGRA) := tegra diff --git a/arch/arm/boards/Makefile b/arch/arm/boards/Makefile index c5dc41526b..91f17374c9 100644 --- a/arch/arm/boards/Makefile +++ b/arch/arm/boards/Makefile @@ -123,6 +123,7 @@ obj-$(CONFIG_MACH_SOCFPGA_TERASIC_DE0_NANO_SOC) += terasic-de0-nano-soc/ obj-$(CONFIG_MACH_SOCFPGA_TERASIC_SOCKIT) += terasic-sockit/ obj-$(CONFIG_MACH_SOLIDRUN_CUBOX) += solidrun-cubox/ obj-$(CONFIG_MACH_SOLIDRUN_MICROSOM) += solidrun-microsom/ +obj-$(CONFIG_MACH_STM32MP157C_DK2) += stm32mp157c-dk2/ obj-$(CONFIG_MACH_TECHNEXION_PICO_HOBBIT) += technexion-pico-hobbit/ obj-$(CONFIG_MACH_TECHNEXION_WANDBOARD) += technexion-wandboard/ obj-$(CONFIG_MACH_TNY_A9260) += tny-a926x/ @@ -156,9 +157,12 @@ obj-$(CONFIG_MACH_QEMU_VIRT64) += qemu-virt64/ obj-$(CONFIG_MACH_WARP7) += element14-warp7/ obj-$(CONFIG_MACH_VF610_TWR) += freescale-vf610-twr/ obj-$(CONFIG_MACH_XILINX_ZCU104) += xilinx-zcu104/ +obj-$(CONFIG_MACH_ZII_COMMON) += zii-common/ obj-$(CONFIG_MACH_ZII_RDU1) += zii-imx51-rdu1/ obj-$(CONFIG_MACH_ZII_RDU2) += zii-imx6q-rdu2/ obj-$(CONFIG_MACH_ZII_IMX8MQ_DEV) += zii-imx8mq-dev/ obj-$(CONFIG_MACH_ZII_VF610_DEV) += zii-vf610-dev/ obj-$(CONFIG_MACH_ZII_IMX7D_RPU2) += zii-imx7d-rpu2/ obj-$(CONFIG_MACH_WAGO_PFC_AM35XX) += wago-pfc-am35xx/ +obj-$(CONFIG_MACH_LS1046ARDB) += ls1046ardb/ +obj-$(CONFIG_MACH_TQMLS1046A) += tqmls1046a/
\ No newline at end of file diff --git a/arch/arm/boards/kindle3/kindle3.c b/arch/arm/boards/kindle3/kindle3.c index 5f1b06aeb2..1d966ff55a 100644 --- a/arch/arm/boards/kindle3/kindle3.c +++ b/arch/arm/boards/kindle3/kindle3.c @@ -152,6 +152,7 @@ static int kindle3_devices_init(void) } device_initcall(kindle3_devices_init); +#define FIVEWAY_PAD_CTL (PAD_CTL_PUS_100K_UP | PAD_CTL_HYS | PAD_CTL_DVS) static iomux_v3_cfg_t kindle3_pads[] = { /* UART1 */ MX35_PAD_RXD1__UART1_RXD_MUX, @@ -183,12 +184,11 @@ static iomux_v3_cfg_t kindle3_pads[] = { MX35_PAD_CSPI1_SPI_RDY__CSPI1_RDY, /* fiveway device: up, down, left, right, select */ - MX35_PAD_ATA_DATA14__GPIO2_27, - MX35_PAD_ATA_DATA15__GPIO2_28, - MX35_PAD_TX5_RX0__GPIO1_10, - MX35_PAD_ATA_BUFF_EN__GPIO2_30, - IOMUX_PAD(0x728, 0x2c4, 5, 0x8c8, 1, - PAD_CTL_PUS_100K_UP | PAD_CTL_HYS | PAD_CTL_DVS), + IOMUX_PAD(0x718, 0x2b4, 5, 0x8b4, 1, FIVEWAY_PAD_CTL), + IOMUX_PAD(0x71c, 0x2b8, 5, 0x8b8, 1, FIVEWAY_PAD_CTL), + IOMUX_PAD(0x59c, 0x158, 5, 0x830, 0, FIVEWAY_PAD_CTL), + IOMUX_PAD(0x724, 0x2c0, 5, 0x8c4, 1, FIVEWAY_PAD_CTL), + IOMUX_PAD(0x728, 0x2c4, 5, 0x8c8, 1, FIVEWAY_PAD_CTL), /* Volume keys: up, down */ MX35_PAD_SCKR__GPIO1_4, diff --git a/arch/arm/boards/ls1046ardb/Makefile b/arch/arm/boards/ls1046ardb/Makefile new file mode 100644 index 0000000000..03ac4ecca3 --- /dev/null +++ b/arch/arm/boards/ls1046ardb/Makefile @@ -0,0 +1,4 @@ +lwl-y += lowlevel.o +obj-y += board.o +lwl-y += start.o +bbenv-y += defaultenv-ls1046ardb diff --git a/arch/arm/boards/ls1046ardb/board.c b/arch/arm/boards/ls1046ardb/board.c new file mode 100644 index 0000000000..483040957e --- /dev/null +++ b/arch/arm/boards/ls1046ardb/board.c @@ -0,0 +1,36 @@ +// SPDX-License-Identifier: GPL-2.0+ + +#include <common.h> +#include <init.h> +#include <envfs.h> +#include <asm/memory.h> +#include <linux/sizes.h> +#include <linux/clk.h> +#include <linux/clkdev.h> +#include <asm/system.h> + +static int rdb_mem_init(void) +{ + if (!of_machine_is_compatible("fsl,ls1046a-rdb")) + return 0; + + arm_add_mem_device("ram0", 0x80000000, 0x80000000); + arm_add_mem_device("ram1", 0x880000000, 3ULL * SZ_2G); + + printf("Current EL: %d\n", current_el()); + + return 0; +} +mem_initcall(rdb_mem_init); + +static int rdb_postcore_init(void) +{ + if (!of_machine_is_compatible("fsl,ls1046a-rdb")) + return 0; + + defaultenv_append_directory(defaultenv_ls1046ardb); + + return 0; +} + +postcore_initcall(rdb_postcore_init); diff --git a/arch/arm/boards/ls1046ardb/defaultenv-ls1046ardb/nv/dev.eth4.mode b/arch/arm/boards/ls1046ardb/defaultenv-ls1046ardb/nv/dev.eth4.mode new file mode 100644 index 0000000000..7a68b11da8 --- /dev/null +++ b/arch/arm/boards/ls1046ardb/defaultenv-ls1046ardb/nv/dev.eth4.mode @@ -0,0 +1 @@ +disabled diff --git a/arch/arm/boards/ls1046ardb/defaultenv-ls1046ardb/nv/dev.eth5.mode b/arch/arm/boards/ls1046ardb/defaultenv-ls1046ardb/nv/dev.eth5.mode new file mode 100644 index 0000000000..7a68b11da8 --- /dev/null +++ b/arch/arm/boards/ls1046ardb/defaultenv-ls1046ardb/nv/dev.eth5.mode @@ -0,0 +1 @@ +disabled diff --git a/arch/arm/boards/ls1046ardb/defaultenv-ls1046ardb/nv/dev.eth6.mode b/arch/arm/boards/ls1046ardb/defaultenv-ls1046ardb/nv/dev.eth6.mode new file mode 100644 index 0000000000..7a68b11da8 --- /dev/null +++ b/arch/arm/boards/ls1046ardb/defaultenv-ls1046ardb/nv/dev.eth6.mode @@ -0,0 +1 @@ +disabled diff --git a/arch/arm/boards/ls1046ardb/defaultenv-ls1046ardb/nv/dev.eth7.mode b/arch/arm/boards/ls1046ardb/defaultenv-ls1046ardb/nv/dev.eth7.mode new file mode 100644 index 0000000000..7a68b11da8 --- /dev/null +++ b/arch/arm/boards/ls1046ardb/defaultenv-ls1046ardb/nv/dev.eth7.mode @@ -0,0 +1 @@ +disabled diff --git a/arch/arm/boards/ls1046ardb/lowlevel.c b/arch/arm/boards/ls1046ardb/lowlevel.c new file mode 100644 index 0000000000..6de16063a7 --- /dev/null +++ b/arch/arm/boards/ls1046ardb/lowlevel.c @@ -0,0 +1,231 @@ +// SPDX-License-Identifier: GPL-2.0+ + +#include <common.h> +#include <debug_ll.h> +#include <ddr_spd.h> +#include <platform_data/mmc-esdhc-imx.h> +#include <i2c/i2c-early.h> +#include <soc/fsl/fsl_ddr_sdram.h> +#include <soc/fsl/immap_lsch2.h> +#include <asm/barebox-arm-head.h> +#include <asm/barebox-arm.h> +#include <asm/syscounter.h> +#include <asm/cache.h> +#include <mach/errata.h> +#include <mach/lowlevel.h> +#include <mach/xload.h> +#include <mach/layerscape.h> + +struct board_specific_parameters { + u32 n_ranks; + u32 datarate_mhz_high; + u32 rank_gb; + u32 clk_adjust; + u32 wrlvl_start; + u32 wrlvl_ctl_2; + u32 wrlvl_ctl_3; +}; + +/* + * These tables contain all valid speeds we want to override with board + * specific parameters. datarate_mhz_high values need to be in ascending order + * for each n_ranks group. + */ +static const struct board_specific_parameters udimm0[] = { + /* + * memory controller 0 + * num| hi| rank| clk| wrlvl | wrlvl | wrlvl + * ranks| mhz| GB |adjst| start | ctl2 | ctl3 + */ + {2, 1350, 0, 8, 6, 0x0708090B, 0x0C0D0E09,}, + {2, 1666, 0, 8, 7, 0x08090A0C, 0x0D0F100B,}, + {2, 1900, 0, 8, 7, 0x09090B0D, 0x0E10120B,}, + {2, 2300, 0, 8, 9, 0x0A0B0C10, 0x1213140E,}, + {} +}; + +static const struct board_specific_parameters *udimms[] = { + udimm0, +}; + +static const struct board_specific_parameters rdimm0[] = { + /* + * memory controller 0 + * num| hi| rank| clk| wrlvl | wrlvl | wrlvl + * ranks| mhz| GB |adjst| start | ctl2 | ctl3 + */ + {2, 1666, 0, 0x8, 0x0D, 0x0C0B0A08, 0x0A0B0C08,}, + {2, 1900, 0, 0x8, 0x0E, 0x0D0C0B09, 0x0B0C0D09,}, + {2, 2300, 0, 0xa, 0x12, 0x100F0D0C, 0x0E0F100C,}, + {1, 1666, 0, 0x8, 0x0D, 0x0C0B0A08, 0x0A0B0C08,}, + {1, 1900, 0, 0x8, 0x0E, 0x0D0C0B09, 0x0B0C0D09,}, + {1, 2300, 0, 0xa, 0x12, 0x100F0D0C, 0x0E0F100C,}, + {} +}; + +static const struct board_specific_parameters *rdimms[] = { + rdimm0, +}; + +static void ddr_board_options(memctl_options_t *popts, + struct dimm_params *pdimm, + struct fsl_ddr_controller *c) +{ + const struct board_specific_parameters *pbsp, *pbsp_highest = NULL; + unsigned long ddr_freq; + + if (!pdimm->n_ranks) + return; + + if (popts->registered_dimm_en) + pbsp = rdimms[0]; + else + pbsp = udimms[0]; + + /* Get clk_adjust, wrlvl_start, wrlvl_ctl, according to the board ddr + * freqency and n_banks specified in board_specific_parameters table. + */ + ddr_freq = c->ddr_freq / 1000000; + while (pbsp->datarate_mhz_high) { + if (pbsp->n_ranks == pdimm->n_ranks) { + if (ddr_freq <= pbsp->datarate_mhz_high) { + popts->clk_adjust = pbsp->clk_adjust; + popts->wrlvl_start = pbsp->wrlvl_start; + popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2; + popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3; + goto found; + } + pbsp_highest = pbsp; + } + pbsp++; + } + + if (pbsp_highest) { + printf("Error: board specific timing not found for %lu MT/s\n", + ddr_freq); + printf("Trying to use the highest speed (%u) parameters\n", + pbsp_highest->datarate_mhz_high); + popts->clk_adjust = pbsp_highest->clk_adjust; + popts->wrlvl_start = pbsp_highest->wrlvl_start; + popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2; + popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3; + } else { + panic("DIMM is not supported by this board"); + } +found: + debug("Found timing match: n_ranks %d, data rate %d, rank_gb %d\n", + pbsp->n_ranks, pbsp->datarate_mhz_high, pbsp->rank_gb); + + popts->data_bus_width = 0; /* 64-bit data bus */ + popts->bstopre = 0; /* enable auto precharge */ + + /* + * Factors to consider for half-strength driver enable: + * - number of DIMMs installed + */ + popts->half_strength_driver_enable = 0; + /* + * Write leveling override + */ + popts->wrlvl_override = 1; + popts->wrlvl_sample = 0xf; + + /* + * Rtt and Rtt_WR override + */ + popts->rtt_override = 0; + + /* Enable ZQ calibration */ + popts->zq_en = 1; + + popts->ddr_cdr1 = DDR_CDR1_DHC_EN | DDR_CDR1_ODT(DDR4_CDR_ODT_80ohm); + popts->ddr_cdr2 = DDR_CDR2_ODT(DDR4_CDR_ODT_80ohm) | + DDR_CDR2_VREF_TRAIN_EN | DDR_CDR2_VREF_RANGE_2; + + /* optimize cpo for erratum A-009942 */ + popts->cpo_sample = 0x61; +} + +extern char __dtb_fsl_ls1046a_rdb_start[]; + +static struct spd_eeprom spd_eeprom[] = { + { + /* filled during runtime */ + }, +}; + +static struct dimm_params dimm_params[] = { + { + /* filled during runtime */ + }, +}; + +static struct fsl_ddr_controller ddrc[] = { + { + .dimm_slots_per_ctrl = ARRAY_SIZE(dimm_params), + .spd_installed_dimms = spd_eeprom, + .dimm_params = dimm_params, + .memctl_opts.ddrtype = SDRAM_TYPE_DDR4, + .base = IOMEM(LSCH2_DDR_ADDR), + .ddr_freq = LS1046A_DDR_FREQ, + .erratum_A008511 = 1, + .erratum_A009803 = 1, + .erratum_A010165 = 1, + .erratum_A009801 = 1, + .erratum_A009942 = 1, + .chip_selects_per_ctrl = 4, + .board_options = ddr_board_options, + }, +}; + +static struct fsl_ddr_info ls1046a_info = { + .num_ctrls = ARRAY_SIZE(ddrc), + .c = ddrc, +}; + +static noinline __noreturn void ls1046ardb_r_entry(unsigned long memsize) +{ + unsigned long membase = LS1046A_DDR_SDRAM_BASE; + struct fsl_i2c *i2c; + int ret; + + if (get_pc() >= membase) { + if (memsize + membase >= 0x100000000) + memsize = 0x100000000 - membase; + + barebox_arm_entry(membase, 0x80000000 - SZ_1M * 67, + __dtb_fsl_ls1046a_rdb_start); + } + + arm_cpu_lowlevel_init(); + debug_ll_init(); + ls1046a_init_lowlevel(); + + i2c = ls1046_i2c_init(IOMEM(LSCH2_I2C1_BASE_ADDR)); + ret = spd_read_eeprom(i2c, i2c_fsl_xfer, 0x51, &spd_eeprom); + if (ret) { + pr_err("Cannot read SPD EEPROM: %d\n", ret); + goto err; + } + + memsize = fsl_ddr_sdram(&ls1046a_info); + + ls1046a_errata_post_ddr(); + + ls1046a_esdhc_start_image(memsize, 0, 0); + +err: + pr_err("Booting failed\n"); + + while (1); +} + +void ls1046ardb_entry(unsigned long r0, unsigned long r1, unsigned long r2); + +__noreturn void ls1046ardb_entry(unsigned long r0, unsigned long r1, unsigned long r2) +{ + relocate_to_current_adr(); + setup_c(); + + ls1046ardb_r_entry(r0); +} diff --git a/arch/arm/boards/ls1046ardb/ls1046ardb_pbi.cfg b/arch/arm/boards/ls1046ardb/ls1046ardb_pbi.cfg new file mode 100644 index 0000000000..5478217524 --- /dev/null +++ b/arch/arm/boards/ls1046ardb/ls1046ardb_pbi.cfg @@ -0,0 +1,22 @@ +#Configure Scratch register +09570600 00000000 +09570604 10000000 +#Disable CCI barrier tranaction +09570178 0000e010 +09180000 00000008 +#USB PHY frequency sel +09570418 0000009e +0957041c 0000009e +09570420 0000009e +#Serdes SATA +09eb1300 80104e20 +09eb08dc 00502880 +#PEX gen3 link +09570158 00000300 +89400890 01048000 +89500890 01048000 +89600890 01048000 +#Alt base register +09570158 00001000 +#flush PBI data +096100c0 000fffff diff --git a/arch/arm/boards/ls1046ardb/ls1046ardb_qspi_pbi.cfg b/arch/arm/boards/ls1046ardb/ls1046ardb_qspi_pbi.cfg new file mode 100644 index 0000000000..735d46c9f9 --- /dev/null +++ b/arch/arm/boards/ls1046ardb/ls1046ardb_qspi_pbi.cfg @@ -0,0 +1,26 @@ +#QSPI clk +0957015c 40100000 +#Configure Scratch register +09570600 00000000 +09570604 10000000 +#Disable CCI barrier tranaction +09570178 0000e010 +09180000 00000008 +#USB PHY frequency sel +09570418 0000009e +0957041c 0000009e +09570420 0000009e +#Serdes SATA +09eb1300 80104e20 +09eb08dc 00502880 +#PEX gen3 link +09570158 00000300 +89400890 01048000 +89500890 01048000 +89600890 01048000 +#Alt base register +09570158 00001000 +#flush PBI data +096100c0 000fffff +#Change endianness +09550000 000f400c diff --git a/arch/arm/boards/ls1046ardb/ls1046ardb_rcw_emmc.cfg b/arch/arm/boards/ls1046ardb/ls1046ardb_rcw_emmc.cfg new file mode 100644 index 0000000000..ccedf87e84 --- /dev/null +++ b/arch/arm/boards/ls1046ardb/ls1046ardb_rcw_emmc.cfg @@ -0,0 +1,7 @@ +#PBL preamble and RCW header +aa55aa55 01ee0100 +# RCW +0c150012 0e000000 00000000 00000000 +11335559 40000012 60040000 c1000000 +00000000 00000000 00000000 00238800 +20124000 00003000 00000096 00000001 diff --git a/arch/arm/boards/ls1046ardb/ls1046ardb_rcw_qspi.cfg b/arch/arm/boards/ls1046ardb/ls1046ardb_rcw_qspi.cfg new file mode 100644 index 0000000000..7b9be0ad3f --- /dev/null +++ b/arch/arm/boards/ls1046ardb/ls1046ardb_rcw_qspi.cfg @@ -0,0 +1,7 @@ +#PBL preamble and RCW header +aa55aa55 01ee0100 +# RCW +0c150010 0e000000 00000000 00000000 +11335559 40005012 40025000 c1000000 +00000000 00000000 00000000 00238800 +20124000 00003101 00000096 00000001 diff --git a/arch/arm/boards/ls1046ardb/ls1046ardb_rcw_sd.cfg b/arch/arm/boards/ls1046ardb/ls1046ardb_rcw_sd.cfg new file mode 100644 index 0000000000..d3b152282f --- /dev/null +++ b/arch/arm/boards/ls1046ardb/ls1046ardb_rcw_sd.cfg @@ -0,0 +1,7 @@ +#PBL preamble and RCW header +aa55aa55 01ee0100 +# RCW +0c150012 0e000000 00000000 00000000 +11335559 40005012 60040000 c1000000 +00000000 00000000 00000000 00238800 +20124000 00003101 00000096 00000001 diff --git a/arch/arm/boards/ls1046ardb/start.S b/arch/arm/boards/ls1046ardb/start.S new file mode 100644 index 0000000000..466782b278 --- /dev/null +++ b/arch/arm/boards/ls1046ardb/start.S @@ -0,0 +1,11 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +#include <linux/linkage.h> +#include <asm/barebox-arm64.h> + +#define STACK_TOP 0x10020000 + +ENTRY_PROC(start_ls1046ardb) + mov x3, #STACK_TOP + mov sp, x3 + b ls1046ardb_entry +ENTRY_PROC_END(start_ls1046ardb) diff --git a/arch/arm/boards/nxp-imx8mq-evk/lowlevel.c b/arch/arm/boards/nxp-imx8mq-evk/lowlevel.c index ffbe14836f..6451e5d414 100644 --- a/arch/arm/boards/nxp-imx8mq-evk/lowlevel.c +++ b/arch/arm/boards/nxp-imx8mq-evk/lowlevel.c @@ -89,7 +89,7 @@ static void nxp_imx8mq_evk_sram_setup(void) */ ENTRY_FUNCTION(start_nxp_imx8mq_evk, r0, r1, r2) { - arm_cpu_lowlevel_init(); + imx8mq_cpu_lowlevel_init(); if (IS_ENABLED(CONFIG_DEBUG_LL)) setup_uart(); diff --git a/arch/arm/boards/phytec-som-imx8mq/lowlevel.c b/arch/arm/boards/phytec-som-imx8mq/lowlevel.c index cfee13f3e7..e42e7a6fcc 100644 --- a/arch/arm/boards/phytec-som-imx8mq/lowlevel.c +++ b/arch/arm/boards/phytec-som-imx8mq/lowlevel.c @@ -83,7 +83,7 @@ static void phytec_imx8mq_som_sram_setup(void) */ ENTRY_FUNCTION(start_phytec_phycore_imx8mq, r0, r1, r2) { - arm_cpu_lowlevel_init(); + imx8mq_cpu_lowlevel_init(); if (IS_ENABLED(CONFIG_DEBUG_LL)) setup_uart(); diff --git a/arch/arm/boards/raspberry-pi/rpi-common.c b/arch/arm/boards/raspberry-pi/rpi-common.c index 60cea7f8e9..bc877f853a 100644 --- a/arch/arm/boards/raspberry-pi/rpi-common.c +++ b/arch/arm/boards/raspberry-pi/rpi-common.c @@ -197,6 +197,8 @@ const struct rpi_model rpi_models_new_scheme[] = { RPI_MODEL(BCM2835_BOARD_REV_ZERO_W, "Zero W", rpi_b_plus_init), RPI_MODEL(BCM2837B0_BOARD_REV_3B_PLUS, "Model 3 B+", rpi_b_plus_init ), RPI_MODEL(BCM2837B0_BOARD_REV_3A_PLUS, "Nodel 3 A+", rpi_b_plus_init), + RPI_MODEL(0xf, "Unknown model", NULL), + RPI_MODEL(BCM2837B0_BOARD_REV_CM3_PLUS, "Compute Module 3+", NULL), }; static int rpi_board_rev = 0; diff --git a/arch/arm/boards/stm32mp157c-dk2/Makefile b/arch/arm/boards/stm32mp157c-dk2/Makefile new file mode 100644 index 0000000000..092c31d6b2 --- /dev/null +++ b/arch/arm/boards/stm32mp157c-dk2/Makefile @@ -0,0 +1,2 @@ +lwl-y += lowlevel.o +obj-y += board.o diff --git a/arch/arm/boards/stm32mp157c-dk2/board.c b/arch/arm/boards/stm32mp157c-dk2/board.c new file mode 100644 index 0000000000..cbfe21db6a --- /dev/null +++ b/arch/arm/boards/stm32mp157c-dk2/board.c @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: GPL-2.0+ +#include <common.h> +#include <linux/sizes.h> +#include <init.h> +#include <asm/memory.h> +#include <mach/stm32.h> + +static int dk2_postcore_init(void) +{ + if (!of_machine_is_compatible("st,stm32mp157c-dk2")) + return 0; + + arm_add_mem_device("ram0", STM32_DDR_BASE, SZ_512M); + + return 0; +} +mem_initcall(dk2_postcore_init); diff --git a/arch/arm/boards/stm32mp157c-dk2/lowlevel.c b/arch/arm/boards/stm32mp157c-dk2/lowlevel.c new file mode 100644 index 0000000000..b8e5959bef --- /dev/null +++ b/arch/arm/boards/stm32mp157c-dk2/lowlevel.c @@ -0,0 +1,19 @@ +// SPDX-License-Identifier: GPL-2.0+ +#include <common.h> +#include <asm/barebox-arm-head.h> +#include <asm/barebox-arm.h> +#include <mach/stm32.h> +#include <debug_ll.h> + +extern char __dtb_stm32mp157c_dk2_start[]; + +ENTRY_FUNCTION(start_stm32mp157c_dk2, r0, r1, r2) +{ + void *fdt; + + arm_cpu_lowlevel_init(); + + fdt = __dtb_stm32mp157c_dk2_start + get_runtime_offset(); + + barebox_arm_entry(STM32_DDR_BASE, SZ_512M, fdt); +} diff --git a/arch/arm/boards/tqmls1046a/Makefile b/arch/arm/boards/tqmls1046a/Makefile new file mode 100644 index 0000000000..851a5dcb3d --- /dev/null +++ b/arch/arm/boards/tqmls1046a/Makefile @@ -0,0 +1,3 @@ +lwl-y += lowlevel.o start.o +obj-y += board.o +bbenv-y += defaultenv-tqmls1046a diff --git a/arch/arm/boards/tqmls1046a/board.c b/arch/arm/boards/tqmls1046a/board.c new file mode 100644 index 0000000000..5d6d5ad62c --- /dev/null +++ b/arch/arm/boards/tqmls1046a/board.c @@ -0,0 +1,32 @@ +// SPDX-License-Identifier: GPL-2.0+ + +#include <common.h> +#include <init.h> +#include <envfs.h> +#include <asm/memory.h> +#include <linux/sizes.h> +#include <linux/clk.h> +#include <linux/clkdev.h> + +static int tqmls1046a_mem_init(void) +{ + if (!of_machine_is_compatible("tqc,tqmls1046a")) + return 0; + + arm_add_mem_device("ram0", 0x80000000, SZ_2G); + + return 0; +} +mem_initcall(tqmls1046a_mem_init); + +static int tqmls1046a_postcore_init(void) +{ + if (!of_machine_is_compatible("tqc,tqmls1046a")) + return 0; + + defaultenv_append_directory(defaultenv_tqmls1046a); + + return 0; +} + +postcore_initcall(tqmls1046a_postcore_init); diff --git a/arch/arm/boards/tqmls1046a/defaultenv-tqmls1046a/nv/dev.eth4.mode b/arch/arm/boards/tqmls1046a/defaultenv-tqmls1046a/nv/dev.eth4.mode new file mode 100644 index 0000000000..7a68b11da8 --- /dev/null +++ b/arch/arm/boards/tqmls1046a/defaultenv-tqmls1046a/nv/dev.eth4.mode @@ -0,0 +1 @@ +disabled diff --git a/arch/arm/boards/tqmls1046a/defaultenv-tqmls1046a/nv/dev.eth5.mode b/arch/arm/boards/tqmls1046a/defaultenv-tqmls1046a/nv/dev.eth5.mode new file mode 100644 index 0000000000..7a68b11da8 --- /dev/null +++ b/arch/arm/boards/tqmls1046a/defaultenv-tqmls1046a/nv/dev.eth5.mode @@ -0,0 +1 @@ +disabled diff --git a/arch/arm/boards/tqmls1046a/defaultenv-tqmls1046a/nv/dev.eth6.mode b/arch/arm/boards/tqmls1046a/defaultenv-tqmls1046a/nv/dev.eth6.mode new file mode 100644 index 0000000000..7a68b11da8 --- /dev/null +++ b/arch/arm/boards/tqmls1046a/defaultenv-tqmls1046a/nv/dev.eth6.mode @@ -0,0 +1 @@ +disabled diff --git a/arch/arm/boards/tqmls1046a/defaultenv-tqmls1046a/nv/dev.eth7.mode b/arch/arm/boards/tqmls1046a/defaultenv-tqmls1046a/nv/dev.eth7.mode new file mode 100644 index 0000000000..7a68b11da8 --- /dev/null +++ b/arch/arm/boards/tqmls1046a/defaultenv-tqmls1046a/nv/dev.eth7.mode @@ -0,0 +1 @@ +disabled diff --git a/arch/arm/boards/tqmls1046a/lowlevel.c b/arch/arm/boards/tqmls1046a/lowlevel.c new file mode 100644 index 0000000000..044d6a418d --- /dev/null +++ b/arch/arm/boards/tqmls1046a/lowlevel.c @@ -0,0 +1,217 @@ +// SPDX-License-Identifier: GPL-2.0+ +#include <common.h> +#include <debug_ll.h> +#include <platform_data/mmc-esdhc-imx.h> +#include <soc/fsl/fsl_ddr_sdram.h> +#include <soc/fsl/immap_lsch2.h> +#include <asm/barebox-arm-head.h> +#include <asm/barebox-arm.h> +#include <asm/syscounter.h> +#include <asm/cache.h> +#include <mach/errata.h> +#include <mach/lowlevel.h> +#include <mach/xload.h> +#include <mach/layerscape.h> + +struct board_specific_parameters { + u32 n_ranks; + u32 datarate_mhz_high; + u32 rank_gb; + u32 clk_adjust; + u32 wrlvl_start; + u32 wrlvl_ctl_2; + u32 wrlvl_ctl_3; +}; + +/* + * These tables contain all valid speeds we want to override with board + * specific parameters. datarate_mhz_high values need to be in ascending order + * for each n_ranks group. + */ +static const struct board_specific_parameters udimm0[] = { + /* + * memory controller 0 + * num| hi| rank| clk| wrlvl | wrlvl | wrlvl | cpo |wrdata|2T + * ranks| mhz| GB |adjst| start | ctl2 | ctl3 | |delay | + */ + {1, 2100, 0, 8, 9, 0x09080806, 0x07060606,}, + {} +}; + +static const struct board_specific_parameters *udimms[] = { + udimm0, +}; + +static void ddr_board_options(memctl_options_t *popts, + struct dimm_params *pdimm, + struct fsl_ddr_controller *c) +{ + const struct board_specific_parameters *pbsp, *pbsp_highest = NULL; + unsigned long ddr_freq; + + if (!pdimm->n_ranks) + return; + + pbsp = udimms[0]; + + /* + * Get clk_adjust, wrlvl_start, wrlvl_ctl, according to the board ddr + * freqency and n_banks specified in board_specific_parameters table. + */ + ddr_freq = c->ddr_freq / 1000000; + while (pbsp->datarate_mhz_high) { + if (pbsp->n_ranks == pdimm->n_ranks) { + if (ddr_freq <= pbsp->datarate_mhz_high) { + popts->clk_adjust = pbsp->clk_adjust; + popts->wrlvl_start = pbsp->wrlvl_start; + popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2; + popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3; + goto found; + } + pbsp_highest = pbsp; + } + pbsp++; + } + + if (pbsp_highest) { + printf("Error: board specific timing not found for %lu MT/s\n", + ddr_freq); + printf("Trying to use the highest speed (%u) parameters\n", + pbsp_highest->datarate_mhz_high); + popts->clk_adjust = pbsp_highest->clk_adjust; + popts->wrlvl_start = pbsp_highest->wrlvl_start; + popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2; + popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3; + } else { + panic("DIMM is not supported by this board"); + } +found: + debug("Found timing match: n_ranks %d, data rate %d, rank_gb %d\n", + pbsp->n_ranks, pbsp->datarate_mhz_high, pbsp->rank_gb); + + popts->data_bus_width = 0; /* 64-bit data bus */ + popts->bstopre = 0; /* enable auto precharge */ + + /* + * Factors to consider for half-strength driver enable: + * - number of DIMMs installed + */ + popts->half_strength_driver_enable = 0; + /* + * Write leveling override + */ + popts->wrlvl_override = 1; + popts->wrlvl_sample = 0xf; + + /* + * Rtt and Rtt_WR override + */ + popts->rtt_override = 0; + + /* Enable ZQ calibration */ + popts->zq_en = 1; + + popts->ddr_cdr1 = DDR_CDR1_DHC_EN | DDR_CDR1_ODT(DDR4_CDR_ODT_60ohm); + popts->ddr_cdr2 = DDR_CDR2_ODT(DDR4_CDR_ODT_60ohm) | + DDR_CDR2_VREF_TRAIN_EN | DDR_CDR2_VREF_RANGE_2; + + /* optimize cpo for erratum A-009942 */ + popts->cpo_sample = 0x61; +} + +static struct dimm_params dimm_params[] = { + { + .n_ranks = 1, + .rank_density = 2147483648u, + .capacity = 2147483648u, + .primary_sdram_width = 64, + .ec_sdram_width = 8, + .registered_dimm = 0, + .mirrored_dimm = 0, + .n_row_addr = 15, + .n_col_addr = 10, + .bank_addr_bits = 2, + .bank_group_bits = 0, + .edc_config = 2, + .burst_lengths_bitmask = 0x0c, + + .tckmin_x_ps = 833, + .tckmax_ps = 1900, + .caslat_x = 0x000DFA00, // + .taa_ps = 13320, + .trcd_ps = 13320, + .trp_ps = 13320, + .tras_ps = 32000, + .trc_ps = 45320, + .trfc1_ps = 260000, + .trfc2_ps = 160000, + .trfc4_ps = 110000, + .tfaw_ps = 21000, + .trrds_ps = 3300, + .trrdl_ps = 4900, + .tccdl_ps = 5000, + .trfc_slr_ps = 3500000, + .refresh_rate_ps = 7800000, + }, +}; + +static struct fsl_ddr_controller ddrc[] = { + { + .dimm_slots_per_ctrl = ARRAY_SIZE(dimm_params), + .dimm_params = dimm_params, + .memctl_opts.ddrtype = SDRAM_TYPE_DDR4, + .base = IOMEM(LSCH2_DDR_ADDR), + .ddr_freq = LS1046A_DDR_FREQ, + .erratum_A008511 = 1, + .erratum_A009803 = 1, + .erratum_A010165 = 1, + .erratum_A009801 = 1, + .erratum_A009942 = 1, + .chip_selects_per_ctrl = 4, + .board_options = ddr_board_options, + }, +}; + +static struct fsl_ddr_info ls1046a_info = { + .num_ctrls = ARRAY_SIZE(ddrc), + .c = ddrc, +}; + +extern char __dtb_fsl_tqmls1046a_mbls10xxa_start[]; + +static noinline __noreturn void tqmls1046a_r_entry(unsigned long memsize) +{ + unsigned long membase = LS1046A_DDR_SDRAM_BASE; + + if (get_pc() >= membase) { + if (memsize + membase >= 0x100000000) + memsize = 0x100000000 - membase; + + barebox_arm_entry(membase, 0x80000000, + __dtb_fsl_tqmls1046a_mbls10xxa_start); + } + + arm_cpu_lowlevel_init(); + debug_ll_init(); + ls1046a_init_lowlevel(); + + memsize = fsl_ddr_sdram(&ls1046a_info); + + ls1046a_errata_post_ddr(); + + ls1046a_esdhc_start_image(memsize, 0, 0); + + pr_err("Booting failed\n"); + + while (1); +} + +void tqmls1046a_entry(unsigned long r0, unsigned long r1, unsigned long r2); + +__noreturn void tqmls1046a_entry(unsigned long r0, unsigned long r1, unsigned long r2) +{ + relocate_to_current_adr(); + setup_c(); + + tqmls1046a_r_entry(r0); +} diff --git a/arch/arm/boards/tqmls1046a/start.S b/arch/arm/boards/tqmls1046a/start.S new file mode 100644 index 0000000000..12b785af54 --- /dev/null +++ b/arch/arm/boards/tqmls1046a/start.S @@ -0,0 +1,12 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +#include <linux/linkage.h> +#include <asm/barebox-arm64.h> + +#define STACK_TOP 0x10020000 + +ENTRY_PROC(start_tqmls1046a) + mov x3, #STACK_TOP + mov sp, x3 + b tqmls1046a_entry +ENTRY_PROC_END(start_tqmls1046a) + diff --git a/arch/arm/boards/tqmls1046a/tqmls1046a_pbi_qspi.cfg b/arch/arm/boards/tqmls1046a/tqmls1046a_pbi_qspi.cfg new file mode 100644 index 0000000000..32865ca2d0 --- /dev/null +++ b/arch/arm/boards/tqmls1046a/tqmls1046a_pbi_qspi.cfg @@ -0,0 +1,33 @@ +#Configure QSPI clock +0957015c 40100000 +#Configure Scratch register +09570600 00000000 +09570604 40010000 +#Disable CCI barrier tranaction +09570178 0000e010 +09180000 00000008 +#USB PHY frequency sel +09570418 0000009c +0957041c 0000009c +09570420 0000009c +#Serdes SATA +09eb1300 80104e20 +09eb08dc 00502880 +#PEX gen3 link (errata A-010477) +09570158 00000300 +89400890 01048000 +89500890 01048000 +89600890 01048000 +#PEX gen3 equalization preset values (errata A-008851) +894008bc 01000000 +89400154 47474747 +89400158 47474747 +894008bc 00000000 +895008bc 01000000 +89500154 47474747 +89500158 47474747 +895008bc 00000000 +896008bc 01000000 +89600154 47474747 +89600158 47474747 +896008bc 00000000 diff --git a/arch/arm/boards/tqmls1046a/tqmls1046a_pbi_sd.cfg b/arch/arm/boards/tqmls1046a/tqmls1046a_pbi_sd.cfg new file mode 100644 index 0000000000..7ac1398123 --- /dev/null +++ b/arch/arm/boards/tqmls1046a/tqmls1046a_pbi_sd.cfg @@ -0,0 +1,35 @@ +#Configure Scratch register +09570600 00000000 +09570604 10000000 +#Disable CCI barrier tranaction +09570178 0000e010 +09180000 00000008 +#USB PHY frequency sel +09570418 0000009c +0957041c 0000009c +09570420 0000009c +#Serdes SATA +09eb1300 80104e20 +09eb08dc 00502880 +#PEX gen3 link (errata A-010477) +09570158 00000300 +89400890 01048000 +89500890 01048000 +89600890 01048000 +#PEX gen3 equalization preset values (errata A-008851) +894008bc 01000000 +89400154 47474747 +89400158 47474747 +894008bc 00000000 +895008bc 01000000 +89500154 47474747 +89500158 47474747 +895008bc 00000000 +896008bc 01000000 +89600154 47474747 +89600158 47474747 +896008bc 00000000 +#Alt base register +09570158 00001000 +#flush PBI data +096100c0 000fffff diff --git a/arch/arm/boards/tqmls1046a/tqmls1046a_rcw_emmc_3333_5559.cfg b/arch/arm/boards/tqmls1046a/tqmls1046a_rcw_emmc_3333_5559.cfg new file mode 100644 index 0000000000..6c72d001c3 --- /dev/null +++ b/arch/arm/boards/tqmls1046a/tqmls1046a_rcw_emmc_3333_5559.cfg @@ -0,0 +1,84 @@ +# RCW values +# 0: 1 - SYS_PLL_CFG : 0 [0x0 / 0b00] +# 2: 6 - SYS_PLL_RAT : 6 [0x6 / 0b00110] +# 8: 9 - MEM_PLL_CFG : 0 [0x0 / 0b00] +# 10: 15 - MEM_PLL_RAT : 20 [0x14 / 0b010100] +# 24: 25 - CGA_PLL1_CFG : 0 [0x0 / 0b00] +# 26: 31 - CGA_PLL1_RAT : 16 [0x10 / 0b010000] +# 32: 33 - CGA_PLL2_CFG : 0 [0x0 / 0b00] +# 34: 39 - CGA_PLL2_RAT : 14 [0xe / 0b001110] +# 96: 99 - C1_PLL_SEL : 0 [0x0 / 0b0000] +# 128:143 - SRDS_PRTCL_S1 : 13107 [0x3333 / 0b0011001100110011] +# 144:159 - SRDS_PRTCL_S2 : 21849 [0x5559 / 0b0101010101011001] +# 160:161 - SRDS_PLL_REF_CLK_SEL_S1 : 3 [0x3 / 0b11] +# 162:163 - SRDS_PLL_REF_CLK_SEL_S2 : 3 [0x3 / 0b11] +# 168:169 - SRDS_PLL_PD_S1 : 0 [0x0 / 0b00] +# 170:171 - SRDS_PLL_PD_S2 : 0 [0x0 / 0b00] +# 176:177 - SRDS_DIV_PEX_S1 : 1 [0x1 / 0b01] +# 178:179 - SRDS_DIV_PEX_S2 : 1 [0x1 / 0b01] +# 186:187 - DDR_REFCLK_SEL : 0 [0x0 / 0b00] +# 188:188 - SRDS_REFCLK_SEL_S1 : 0 [0x0 / 0b0] +# 189:189 - SRDS_REFCLK_SEL_S2 : 0 [0x0 / 0b0] +# 190:191 - DDR_FDBK_MULT : 2 [0x2 / 0b10] +# 192:195 - PBI_SRC : 6 [0x6 / 0b0110] +# 201:201 - BOOT_HO : 0 [0x0 / 0b0] +# 202:202 - SB_EN : 0 [0x0 / 0b0] +# 203:211 - IFC_MODE : 64 [0x40 / 0b001000000] +# 224:226 - HWA_CGA_M1_CLK_SEL : 6 [0x6 / 0b110] +# 230:231 - DRAM_LAT : 1 [0x1 / 0b01] +# 232:232 - DDR_RATE : 0 [0x0 / 0b0] +# 234:234 - DDR_RSV0 : 0 [0x0 / 0b0] +# 242:242 - SYS_PLL_SPD : 0 [0x0 / 0b0] +# 243:243 - MEM_PLL_SPD : 0 [0x0 / 0b0] +# 244:244 - CGA_PLL1_SPD : 0 [0x0 / 0b0] +# 245:245 - CGA_PLL2_SPD : 0 [0x0 / 0b0] +# 264:266 - HOST_AGT_PEX : 0 [0x0 / 0b000] +# 288:295 - GP_INFO1 : 0 [0x00 / 0b00000000] +# 299:319 - GP_INFO2 : 0 [0x00000 / 0b000000000000000000000] +# 354:356 - UART_EXT : 0 [0x0 / 0b000] +# 357:359 - IRQ_EXT : 0 [0x0 / 0b000] +# 360:362 - SPI_EXT : 0 [0x0 / 0b000] +# 363:365 - SDHC_EXT : 0 [0x0 / 0b000] +# 366:368 - UART_BASE : 5 [0x5 / 0b101] +# 369:369 - ASLEEP : 0 [0x0 / 0b0] +# 370:370 - RTC : 0 [0x0 / 0b0] +# 371:371 - SDHC_BASE : 0 [0x0 / 0b0] +# 372:372 - IRQ_OUT : 1 [0x1 / 0b1] +# 373:381 - IRQ_BASE : 0 [0x00 / 0b000000000] +# 382:383 - SPI_BASE : 0 [0x0 / 0b00] +# 384:386 - IFC_GRP_A_EXT : 1 [0x1 / 0b001] +# 393:395 - IFC_GRP_D_EXT : 0 [0x0 / 0b000] +# 396:398 - IFC_GRP_E1_EXT : 0 [0x0 / 0b000] +# 399:401 - IFC_GRP_F_EXT : 1 [0x1 / 0b001] +# 405:405 - IFC_GRP_E1_BASE : 0 [0x0 / 0b0] +# 407:407 - IFC_GRP_D_BASE : 0 [0x0 / 0b0] +# 412:413 - IFC_GRP_A_BASE : 0 [0x0 / 0b00] +# 415:415 - IFC_A_22_24 : 0 [0x0 / 0b0] +# 416:418 - EC1 : 0 [0x0 / 0b000] +# 419:421 - EC2 : 0 [0x0 / 0b000] +# 422:423 - LVDD_VSEL : 1 [0x1 / 0b01] +# 424:424 - I2C_IPGCLK_SEL : 0 [0x0 / 0b0] +# 425:425 - EM1 : 0 [0x0 / 0b0] +# 426:426 - EM2 : 0 [0x0 / 0b0] +# 427:427 - EMI2_DMODE : 1 [0x1 / 0b1] +# 428:428 - EMI2_CMODE : 0 [0x0 / 0b0] +# 429:429 - USB_DRVVBUS : 0 [0x0 / 0b0] +# 430:430 - USB_PWRFAULT : 0 [0x0 / 0b0] +# 433:434 - TVDD_VSEL : 1 [0x1 / 0b01] +# 435:436 - DVDD_VSEL : 2 [0x2 / 0b10] +# 438:438 - EMI1_DMODE : 1 [0x1 / 0b1] +# 439:440 - EVDD_VSEL : 0 [0x0 / 0b00] +# 441:443 - IIC2_BASE : 0 [0x0 / 0b000] +# 444:444 - EMI1_CMODE : 0 [0x0 / 0b0] +# 445:447 - IIC2_EXT : 2 [0x2 / 0b010] +# 472:481 - SYSCLK_FREQ : 600 [0x258 / 0b1001011000] +# 509:511 - HWA_CGA_M2_CLK_SEL : 1 [0x1 / 0b001] + + +#PBL preamble and RCW header +aa55aa55 01ee0100 +# RCW +0c140010 0e000000 00000000 00000000 +33335559 f0005002 60040000 c1000000 +00000000 00000000 00000000 00028800 +20004000 01103202 00000096 00000001 diff --git a/arch/arm/boards/tqmls1046a/tqmls1046a_rcw_qspi_3333_5559.cfg b/arch/arm/boards/tqmls1046a/tqmls1046a_rcw_qspi_3333_5559.cfg new file mode 100644 index 0000000000..395c75c7d0 --- /dev/null +++ b/arch/arm/boards/tqmls1046a/tqmls1046a_rcw_qspi_3333_5559.cfg @@ -0,0 +1,84 @@ +# RCW values +# 0: 1 - SYS_PLL_CFG : 0 [0x0 / 0b00] +# 2: 6 - SYS_PLL_RAT : 6 [0x6 / 0b00110] +# 8: 9 - MEM_PLL_CFG : 0 [0x0 / 0b00] +# 10: 15 - MEM_PLL_RAT : 20 [0x14 / 0b010100] +# 24: 25 - CGA_PLL1_CFG : 0 [0x0 / 0b00] +# 26: 31 - CGA_PLL1_RAT : 16 [0x10 / 0b010000] +# 32: 33 - CGA_PLL2_CFG : 0 [0x0 / 0b00] +# 34: 39 - CGA_PLL2_RAT : 14 [0xe / 0b001110] +# 96: 99 - C1_PLL_SEL : 0 [0x0 / 0b0000] +# 128:143 - SRDS_PRTCL_S1 : 13107 [0x3333 / 0b0011001100110011] +# 144:159 - SRDS_PRTCL_S2 : 21849 [0x5559 / 0b0101010101011001] +# 160:161 - SRDS_PLL_REF_CLK_SEL_S1 : 3 [0x3 / 0b11] +# 162:163 - SRDS_PLL_REF_CLK_SEL_S2 : 3 [0x3 / 0b11] +# 168:169 - SRDS_PLL_PD_S1 : 0 [0x0 / 0b00] +# 170:171 - SRDS_PLL_PD_S2 : 0 [0x0 / 0b00] +# 176:177 - SRDS_DIV_PEX_S1 : 1 [0x1 / 0b01] +# 178:179 - SRDS_DIV_PEX_S2 : 1 [0x1 / 0b01] +# 186:187 - DDR_REFCLK_SEL : 0 [0x0 / 0b00] +# 188:188 - SRDS_REFCLK_SEL_S1 : 0 [0x0 / 0b0] +# 189:189 - SRDS_REFCLK_SEL_S2 : 0 [0x0 / 0b0] +# 190:191 - DDR_FDBK_MULT : 2 [0x2 / 0b10] +# 192:195 - PBI_SRC : 4 [0x4 / 0b0100] +# 201:201 - BOOT_HO : 0 [0x0 / 0b0] +# 202:202 - SB_EN : 0 [0x0 / 0b0] +# 203:211 - IFC_MODE : 37 [0x25 / 0b000100101] +# 224:226 - HWA_CGA_M1_CLK_SEL : 6 [0x6 / 0b110] +# 230:231 - DRAM_LAT : 1 [0x1 / 0b01] +# 232:232 - DDR_RATE : 0 [0x0 / 0b0] +# 234:234 - DDR_RSV0 : 0 [0x0 / 0b0] +# 242:242 - SYS_PLL_SPD : 0 [0x0 / 0b0] +# 243:243 - MEM_PLL_SPD : 0 [0x0 / 0b0] +# 244:244 - CGA_PLL1_SPD : 0 [0x0 / 0b0] +# 245:245 - CGA_PLL2_SPD : 0 [0x0 / 0b0] +# 264:266 - HOST_AGT_PEX : 0 [0x0 / 0b000] +# 288:295 - GP_INFO1 : 0 [0x00 / 0b00000000] +# 299:319 - GP_INFO2 : 0 [0x00000 / 0b000000000000000000000] +# 354:356 - UART_EXT : 0 [0x0 / 0b000] +# 357:359 - IRQ_EXT : 0 [0x0 / 0b000] +# 360:362 - SPI_EXT : 0 [0x0 / 0b000] +# 363:365 - SDHC_EXT : 0 [0x0 / 0b000] +# 366:368 - UART_BASE : 5 [0x5 / 0b101] +# 369:369 - ASLEEP : 0 [0x0 / 0b0] +# 370:370 - RTC : 0 [0x0 / 0b0] +# 371:371 - SDHC_BASE : 0 [0x0 / 0b0] +# 372:372 - IRQ_OUT : 1 [0x1 / 0b1] +# 373:381 - IRQ_BASE : 0 [0x00 / 0b000000000] +# 382:383 - SPI_BASE : 0 [0x0 / 0b00] +# 384:386 - IFC_GRP_A_EXT : 1 [0x1 / 0b001] +# 393:395 - IFC_GRP_D_EXT : 0 [0x0 / 0b000] +# 396:398 - IFC_GRP_E1_EXT : 0 [0x0 / 0b000] +# 399:401 - IFC_GRP_F_EXT : 1 [0x1 / 0b001] +# 405:405 - IFC_GRP_E1_BASE : 0 [0x0 / 0b0] +# 407:407 - IFC_GRP_D_BASE : 0 [0x0 / 0b0] +# 412:413 - IFC_GRP_A_BASE : 0 [0x0 / 0b00] +# 415:415 - IFC_A_22_24 : 0 [0x0 / 0b0] +# 416:418 - EC1 : 0 [0x0 / 0b000] +# 419:421 - EC2 : 0 [0x0 / 0b000] +# 422:423 - LVDD_VSEL : 1 [0x1 / 0b01] +# 424:424 - I2C_IPGCLK_SEL : 0 [0x0 / 0b0] +# 425:425 - EM1 : 0 [0x0 / 0b0] +# 426:426 - EM2 : 0 [0x0 / 0b0] +# 427:427 - EMI2_DMODE : 1 [0x1 / 0b1] +# 428:428 - EMI2_CMODE : 0 [0x0 / 0b0] +# 429:429 - USB_DRVVBUS : 0 [0x0 / 0b0] +# 430:430 - USB_PWRFAULT : 0 [0x0 / 0b0] +# 433:434 - TVDD_VSEL : 1 [0x1 / 0b01] +# 435:436 - DVDD_VSEL : 2 [0x2 / 0b10] +# 438:438 - EMI1_DMODE : 1 [0x1 / 0b1] +# 439:440 - EVDD_VSEL : 0 [0x0 / 0b00] +# 441:443 - IIC2_BASE : 0 [0x0 / 0b000] +# 444:444 - EMI1_CMODE : 0 [0x0 / 0b0] +# 445:447 - IIC2_EXT : 2 [0x2 / 0b010] +# 472:481 - SYSCLK_FREQ : 600 [0x258 / 0b1001011000] +# 509:511 - HWA_CGA_M2_CLK_SEL : 1 [0x1 / 0b001] + + +#PBL preamble and RCW header +aa55aa55 01ee0100 +# RCW +0c140010 0e000000 00000000 00000000 +33335559 f0005002 40025000 c1000000 +00000000 00000000 00000000 00028800 +20004000 01103202 00000096 00000001 diff --git a/arch/arm/boards/tqmls1046a/tqmls1046a_rcw_sd_3333_5559.cfg b/arch/arm/boards/tqmls1046a/tqmls1046a_rcw_sd_3333_5559.cfg new file mode 100644 index 0000000000..4ef6d576ed --- /dev/null +++ b/arch/arm/boards/tqmls1046a/tqmls1046a_rcw_sd_3333_5559.cfg @@ -0,0 +1,84 @@ +# RCW values +# 0: 1 - SYS_PLL_CFG : 0 [0x0 / 0b00] +# 2: 6 - SYS_PLL_RAT : 6 [0x6 / 0b00110] +# 8: 9 - MEM_PLL_CFG : 0 [0x0 / 0b00] +# 10: 15 - MEM_PLL_RAT : 20 [0x14 / 0b010100] +# 24: 25 - CGA_PLL1_CFG : 0 [0x0 / 0b00] +# 26: 31 - CGA_PLL1_RAT : 16 [0x10 / 0b010000] +# 32: 33 - CGA_PLL2_CFG : 0 [0x0 / 0b00] +# 34: 39 - CGA_PLL2_RAT : 14 [0xe / 0b001110] +# 96: 99 - C1_PLL_SEL : 0 [0x0 / 0b0000] +# 128:143 - SRDS_PRTCL_S1 : 13107 [0x3333 / 0b0011001100110011] +# 144:159 - SRDS_PRTCL_S2 : 21849 [0x5559 / 0b0101010101011001] +# 160:161 - SRDS_PLL_REF_CLK_SEL_S1 : 3 [0x3 / 0b11] +# 162:163 - SRDS_PLL_REF_CLK_SEL_S2 : 3 [0x3 / 0b11] +# 168:169 - SRDS_PLL_PD_S1 : 0 [0x0 / 0b00] +# 170:171 - SRDS_PLL_PD_S2 : 0 [0x0 / 0b00] +# 176:177 - SRDS_DIV_PEX_S1 : 1 [0x1 / 0b01] +# 178:179 - SRDS_DIV_PEX_S2 : 1 [0x1 / 0b01] +# 186:187 - DDR_REFCLK_SEL : 0 [0x0 / 0b00] +# 188:188 - SRDS_REFCLK_SEL_S1 : 0 [0x0 / 0b0] +# 189:189 - SRDS_REFCLK_SEL_S2 : 0 [0x0 / 0b0] +# 190:191 - DDR_FDBK_MULT : 2 [0x2 / 0b10] +# 192:195 - PBI_SRC : 6 [0x6 / 0b0110] +# 201:201 - BOOT_HO : 0 [0x0 / 0b0] +# 202:202 - SB_EN : 0 [0x0 / 0b0] +# 203:211 - IFC_MODE : 64 [0x40 / 0b001000000] +# 224:226 - HWA_CGA_M1_CLK_SEL : 6 [0x6 / 0b110] +# 230:231 - DRAM_LAT : 1 [0x1 / 0b01] +# 232:232 - DDR_RATE : 0 [0x0 / 0b0] +# 234:234 - DDR_RSV0 : 0 [0x0 / 0b0] +# 242:242 - SYS_PLL_SPD : 0 [0x0 / 0b0] +# 243:243 - MEM_PLL_SPD : 0 [0x0 / 0b0] +# 244:244 - CGA_PLL1_SPD : 0 [0x0 / 0b0] +# 245:245 - CGA_PLL2_SPD : 0 [0x0 / 0b0] +# 264:266 - HOST_AGT_PEX : 0 [0x0 / 0b000] +# 288:295 - GP_INFO1 : 0 [0x00 / 0b00000000] +# 299:319 - GP_INFO2 : 0 [0x00000 / 0b000000000000000000000] +# 354:356 - UART_EXT : 0 [0x0 / 0b000] +# 357:359 - IRQ_EXT : 0 [0x0 / 0b000] +# 360:362 - SPI_EXT : 0 [0x0 / 0b000] +# 363:365 - SDHC_EXT : 0 [0x0 / 0b000] +# 366:368 - UART_BASE : 5 [0x5 / 0b101] +# 369:369 - ASLEEP : 0 [0x0 / 0b0] +# 370:370 - RTC : 0 [0x0 / 0b0] +# 371:371 - SDHC_BASE : 0 [0x0 / 0b0] +# 372:372 - IRQ_OUT : 1 [0x1 / 0b1] +# 373:381 - IRQ_BASE : 0 [0x00 / 0b000000000] +# 382:383 - SPI_BASE : 0 [0x0 / 0b00] +# 384:386 - IFC_GRP_A_EXT : 1 [0x1 / 0b001] +# 393:395 - IFC_GRP_D_EXT : 0 [0x0 / 0b000] +# 396:398 - IFC_GRP_E1_EXT : 0 [0x0 / 0b000] +# 399:401 - IFC_GRP_F_EXT : 1 [0x1 / 0b001] +# 405:405 - IFC_GRP_E1_BASE : 0 [0x0 / 0b0] +# 407:407 - IFC_GRP_D_BASE : 0 [0x0 / 0b0] +# 412:413 - IFC_GRP_A_BASE : 0 [0x0 / 0b00] +# 415:415 - IFC_A_22_24 : 0 [0x0 / 0b0] +# 416:418 - EC1 : 0 [0x0 / 0b000] +# 419:421 - EC2 : 0 [0x0 / 0b000] +# 422:423 - LVDD_VSEL : 1 [0x1 / 0b01] +# 424:424 - I2C_IPGCLK_SEL : 0 [0x0 / 0b0] +# 425:425 - EM1 : 0 [0x0 / 0b0] +# 426:426 - EM2 : 0 [0x0 / 0b0] +# 427:427 - EMI2_DMODE : 1 [0x1 / 0b1] +# 428:428 - EMI2_CMODE : 0 [0x0 / 0b0] +# 429:429 - USB_DRVVBUS : 0 [0x0 / 0b0] +# 430:430 - USB_PWRFAULT : 0 [0x0 / 0b0] +# 433:434 - TVDD_VSEL : 1 [0x1 / 0b01] +# 435:436 - DVDD_VSEL : 2 [0x2 / 0b10] +# 438:438 - EMI1_DMODE : 1 [0x1 / 0b1] +# 439:440 - EVDD_VSEL : 2 [0x2 / 0b10] +# 441:443 - IIC2_BASE : 0 [0x0 / 0b000] +# 444:444 - EMI1_CMODE : 0 [0x0 / 0b0] +# 445:447 - IIC2_EXT : 1 [0x1 / 0b001] +# 472:481 - SYSCLK_FREQ : 600 [0x258 / 0b1001011000] +# 509:511 - HWA_CGA_M2_CLK_SEL : 1 [0x1 / 0b001] + + +#PBL preamble and RCW header +aa55aa55 01ee0100 +# RCW +0c140010 0e000000 00000000 00000000 +33335559 f0005002 60040000 c1000000 +00000000 00000000 00000000 00028800 +20004000 01103301 00000096 00000001 diff --git a/arch/arm/boards/zii-common/Makefile b/arch/arm/boards/zii-common/Makefile new file mode 100644 index 0000000000..fcc5cdf97d --- /dev/null +++ b/arch/arm/boards/zii-common/Makefile @@ -0,0 +1 @@ +obj-y += board.o switch-cmd.o pn-fixup.o diff --git a/arch/arm/boards/zii-common/board.c b/arch/arm/boards/zii-common/board.c new file mode 100644 index 0000000000..20ec64d2d4 --- /dev/null +++ b/arch/arm/boards/zii-common/board.c @@ -0,0 +1,75 @@ +/* + * Copyright (C) 2019 Zodiac Inflight Innovation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <common.h> +#include <globalvar.h> +#include <init.h> +#include <fs.h> + +static int rdu_networkconfig(void) +{ + static char *rdu_netconfig; + struct device_d *sp_dev; + + if (!of_machine_is_compatible("zii,imx6q-zii-rdu2") && + !of_machine_is_compatible("zii,imx6qp-zii-rdu2") && + !of_machine_is_compatible("zii,imx51-rdu1")) + return 0; + + sp_dev = get_device_by_name("sp"); + if (!sp_dev) { + pr_warn("no sp device found, network config not available!\n"); + return -ENODEV; + } + + rdu_netconfig = basprintf("ip=%s:::%s::eth0:", + dev_get_param(sp_dev, "ipaddr"), + dev_get_param(sp_dev, "netmask")); + + globalvar_add_simple_string("linux.bootargs.rdu_network", + &rdu_netconfig); + + return 0; +} +late_initcall(rdu_networkconfig); + +#define I210_CFGWORD_PCIID_157B 0x157b1a11 +static int rdu_i210_invm(void) +{ + int fd; + u32 val; + + if (!of_machine_is_compatible("zii,imx6q-zii-rdu2") && + !of_machine_is_compatible("zii,imx6qp-zii-rdu2") && + !of_machine_is_compatible("zii,imx8mq-ultra")) + return 0; + + fd = open("/dev/e1000-invm0", O_RDWR); + if (fd < 0) { + pr_err("could not open e1000 iNVM device!\n"); + return fd; + } + + pread(fd, &val, sizeof(val), 0); + if (val == I210_CFGWORD_PCIID_157B) { + pr_debug("i210 already programmed correctly\n"); + return 0; + } + + val = I210_CFGWORD_PCIID_157B; + pwrite(fd, &val, sizeof(val), 0); + + return 0; +} +late_initcall(rdu_i210_invm); diff --git a/arch/arm/boards/zii-common/pn-fixup.c b/arch/arm/boards/zii-common/pn-fixup.c new file mode 100644 index 0000000000..a665199917 --- /dev/null +++ b/arch/arm/boards/zii-common/pn-fixup.c @@ -0,0 +1,32 @@ +/* + * Copyright (C) 2019 Zodiac Inflight Innovation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <common.h> +#include <init.h> +#include <linux/nvmem-consumer.h> + +#include "pn-fixup.h" + +char *zii_read_part_number(const char *cell_name, size_t cell_size) +{ + struct device_node *np; + + np = of_find_node_by_name(NULL, "device-info"); + if (!np) { + pr_warn("No device information found\n"); + return ERR_PTR(-ENOENT); + } + + return nvmem_cell_get_and_read(np, cell_name, cell_size); +} diff --git a/arch/arm/boards/zii-common/pn-fixup.h b/arch/arm/boards/zii-common/pn-fixup.h new file mode 100644 index 0000000000..39b848bd00 --- /dev/null +++ b/arch/arm/boards/zii-common/pn-fixup.h @@ -0,0 +1,93 @@ +/* + * Copyright (C) 2019 Zodiac Inflight Innovation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __ZII_PN_FIXUP__ +#define __ZII_PN_FIXUP__ + +struct zii_pn_fixup { + const char *pn; + void (*callback) (const struct zii_pn_fixup *fixup); +}; + +char *zii_read_part_number(const char *, size_t); +/** + * __zii_process_fixups - Process array of ZII part number based fixups + * + * @__fixups: Array of part number base fixups + * @__cell_name: Name of the NVMEM cell containing the part number + * @__cell_size: Size of the NVMEM cell containing the part number + * + * NOTE: Keeping this code as a marcro allows us to avoid restricting + * the type of __fixups to an array of struct zii_pn_fixup. This is + * really convenient becuase it allows us to do things like + * + * struct zii_foo_fixup { + * struct zii_pn_fixup parent; + * type1 custom_field_1 + * type2 custom_field_2 + * ... + * }; + * + * ... + * + * const struct zii_foo_fixup foo_fixups[] = { + * { fixup1 }, + * { fixup2 }, + * { fixup3 }, + * }; + * + * ... + * + * __zii_process_fixups(foo_fixups, "blah", BLAH_LENGTH); + * + * which allows us to have the most compact definition of array of + * fixups + */ +#define __zii_process_fixups(__fixups, __cell_name, __cell_size) \ + do { \ + char *__pn = zii_read_part_number(__cell_name, \ + __cell_size); \ + const struct zii_pn_fixup *__fixup; \ + unsigned int __i; \ + bool __match_found = false; \ + \ + if (WARN_ON(IS_ERR(__pn))) \ + break; \ + \ + for (__i = 0; __i < ARRAY_SIZE(__fixups); __i++) { \ + __fixup = \ + (const struct zii_pn_fixup *) &__fixups[__i]; \ + \ + if (strstr(__pn, __fixup->pn)) { \ + pr_debug("%s->%pS\n", __func__, \ + __fixup->callback); \ + __match_found = true; \ + __fixup->callback(__fixup); \ + } \ + } \ + if (!__match_found) \ + pr_err("No config fixups found for P/N %s!\n", __pn); \ + free(__pn); \ + } while (0) + +#define DDS_PART_NUMBER_SIZE 15 +#define LRU_PART_NUMBER_SIZE 15 + +#define zii_process_dds_fixups(_fixups) \ + __zii_process_fixups(_fixups, "dds-part-number", DDS_PART_NUMBER_SIZE) + +#define zii_process_lru_fixups(_fixups) \ + __zii_process_fixups(_fixups, "lru-part-number", LRU_PART_NUMBER_SIZE) + +#endif /* __ZII_PN_FIXUP__ */ diff --git a/arch/arm/boards/zii-imx6q-rdu2/switch-cmd.c b/arch/arm/boards/zii-common/switch-cmd.c index bdba46fb36..30438053a1 100644 --- a/arch/arm/boards/zii-imx6q-rdu2/switch-cmd.c +++ b/arch/arm/boards/zii-common/switch-cmd.c @@ -11,19 +11,16 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ -#include <common.h> #include <command.h> +#include <common.h> #include <i2c/i2c.h> +#include <linux/mfd/rave-sp.h> -static int do_rave_switch_reset(int argc, char *argv[]) +static int do_rdu2_switch_reset(void) { struct i2c_client client; u8 reg; - if (!of_machine_is_compatible("zii,imx6q-zii-rdu2") && - !of_machine_is_compatible("zii,imx6qp-zii-rdu2")) - return -ENODEV; - client.adapter = i2c_get_adapter(1); if (!client.adapter) return -ENODEV; @@ -42,8 +39,35 @@ static int do_rave_switch_reset(int argc, char *argv[]) return 0; } +static int do_rdu1_switch_reset(void) +{ + struct device_d *sp_dev = get_device_by_name("sp"); + struct rave_sp *sp = sp_dev->priv; + u8 cmd[] = { + [0] = RAVE_SP_CMD_RESET_ETH_SWITCH, + [1] = 0 + }; + + if (IS_ENABLED(CONFIG_RAVE_SP_CORE)) + return rave_sp_exec(sp, cmd, sizeof(cmd), NULL, 0); + else + return -ENODEV; +} + +static int do_rave_switch_reset(int argc, char *argv[]) +{ + if (of_machine_is_compatible("zii,imx6q-zii-rdu2") || + of_machine_is_compatible("zii,imx6qp-zii-rdu2")) + return do_rdu2_switch_reset(); + + if (of_machine_is_compatible("zii,imx51-rdu1")) + return do_rdu1_switch_reset(); + + return -ENODEV; +} + BAREBOX_CMD_START(rave_reset_switch) .cmd = do_rave_switch_reset, - BAREBOX_CMD_DESC("reset ethernet switch on RDU2") + BAREBOX_CMD_DESC("reset ethernet switch on RDU") BAREBOX_CMD_GROUP(CMD_GRP_HWMANIP) BAREBOX_CMD_END diff --git a/arch/arm/boards/zii-imx6q-rdu2/Makefile b/arch/arm/boards/zii-imx6q-rdu2/Makefile index 10dfba3a3c..c6285362f2 100644 --- a/arch/arm/boards/zii-imx6q-rdu2/Makefile +++ b/arch/arm/boards/zii-imx6q-rdu2/Makefile @@ -1,3 +1,3 @@ -obj-y += board.o switch-cmd.o +obj-y += board.o lwl-y += lowlevel.o bbenv-y += defaultenv-rdu2 diff --git a/arch/arm/boards/zii-imx6q-rdu2/board.c b/arch/arm/boards/zii-imx6q-rdu2/board.c index 6352f49c5a..6adb0b1c6f 100644 --- a/arch/arm/boards/zii-imx6q-rdu2/board.c +++ b/arch/arm/boards/zii-imx6q-rdu2/board.c @@ -23,6 +23,30 @@ #include <mach/imx6.h> #include <net.h> #include <linux/nvmem-consumer.h> +#include "../zii-common/pn-fixup.h" + +enum rdu2_lcd_interface_type { + IT_SINGLE_LVDS, + IT_DUAL_LVDS, + IT_EDP +}; + +enum rdu2_lvds_busformat { + BF_NONE, + BF_JEIDA, + BF_SPWG +}; + +#define RDU2_LRU_FLAG_EGALAX BIT(0) +#define RDU2_LRU_FLAG_NO_FEC BIT(1) + +struct rdu2_lru_fixup { + struct zii_pn_fixup fixup; + unsigned int flags; + enum rdu2_lcd_interface_type type; + enum rdu2_lvds_busformat bus_format; + const char *compatible; +}; #define RDU2_DAC1_RESET IMX_GPIO_NR(1, 0) #define RDU2_DAC2_RESET IMX_GPIO_NR(1, 2) @@ -190,31 +214,254 @@ static int rdu2_ethernet_init(void) } late_initcall(rdu2_ethernet_init); -#define I210_CFGWORD_PCIID_157B 0x157b1a11 -static int rdu2_i210_invm(void) +static int rdu2_fixup_egalax_ts(struct device_node *root, void *context) { - int fd; - u32 val; + struct device_node *np; - if (!of_machine_is_compatible("zii,imx6q-zii-rdu2") && - !of_machine_is_compatible("zii,imx6qp-zii-rdu2")) - return 0; + /* + * The 32" unit has a EETI eGalax touchscreen instead of the + * Synaptics RMI4 found on other units. + */ + pr_info("Enabling eGalax touchscreen instead of RMI4\n"); - fd = open("/dev/e1000-invm0", O_RDWR); - if (fd < 0) { - pr_err("could not open e1000 iNVM device!\n"); - return fd; + np = of_find_compatible_node(root, NULL, "syna,rmi4-i2c"); + if (!np) + return -ENODEV; + + of_device_disable(np); + + np = of_find_compatible_node(root, NULL, "eeti,exc3000"); + if (!np) + return -ENODEV; + + of_device_enable(np); + of_property_write_u32(np->parent, "clock-frequency", 200000); + + + return 0; +} + +static int rdu2_fixup_dsa(struct device_node *root, void *context) +{ + struct device_node *switch_np, *np; + phandle i210_handle; + + /* + * The 12.1" unit has no FEC connection, so we need to rewrite + * the i210 port into the CPU port and delete the FEC port, + * which is part of the common setup. + */ + pr_info("Rewriting i210 switch port into CPU port\n"); + + switch_np = of_find_compatible_node(root, NULL, "marvell,mv88e6085"); + if (!switch_np) + return -ENODEV; + + np = of_find_node_by_name(switch_np, "port@2"); + if (!np) + return -ENODEV; + + of_delete_node(np); + + np = of_find_node_by_name(root, "i210@0"); + if (!np) + return -ENODEV; + + i210_handle = of_node_create_phandle(np); + + np = of_find_node_by_name(switch_np, "port@0"); + if (!np) + return -ENODEV; + + of_property_write_u32(np, "ethernet", i210_handle); + of_property_write_string(np, "label", "cpu"); + + return 0; +} + +static int rdu2_fixup_edp(struct device_node *root) +{ + const bool kernel_fixup = root != NULL; + struct device_node *np; + + if (kernel_fixup) { + /* + * Kernel DT fixup needs this additional step + */ + pr_info("Found eDP display, enabling parallel output " + "and eDP bridge.\n"); + np = of_find_compatible_node(root, NULL, + "fsl,imx-parallel-display"); + if (!np) + return -ENODEV; + + of_device_enable(np); } - pread(fd, &val, sizeof(val), 0); - if (val == I210_CFGWORD_PCIID_157B) { - pr_debug("i210 already programmed correctly\n"); - return 0; + np = of_find_compatible_node(root, NULL, "toshiba,tc358767"); + if (!np) + return -ENODEV; + + of_device_enable(np); + + return 0; +} + +static int rdu2_fixup_lvds(struct device_node *root, + const struct rdu2_lru_fixup *fixup) +{ + const bool kernel_fixup = root != NULL; + struct device_node *np; + + /* + * LVDS panels need the correct compatible + */ + pr_info("Found LVDS display, enabling %s channel LDB and " + "panel with compatible \"%s\".\n", + fixup->type == IT_DUAL_LVDS ? "dual" : "single", + fixup->compatible); + /* + * LVDS panels need the correct timings + */ + np = of_find_node_by_name(root, "panel"); + if (!np) + return -ENODEV; + + if (kernel_fixup) { + of_device_enable(np); + of_property_write_string(np, "compatible", fixup->compatible); + } else { + struct device_node *child, *tmp; + + of_device_enable_and_register(np); + /* + * Delete all mode entries, which aren't suited for the + * current display + */ + np = of_find_node_by_name(np, "display-timings"); + if (!np) + return -ENODEV; + + for_each_child_of_node_safe(np, tmp, child) { + if (!of_device_is_compatible(child, + fixup->compatible)) + of_delete_node(child); + } } + /* + * enable LDB channel 0 and set correct interface mode + */ + np = of_find_compatible_node(root, NULL, "fsl,imx6q-ldb"); + if (!np) + return -ENODEV; + + if (kernel_fixup) + of_device_enable(np); + else + of_device_enable_and_register(np); + + if (fixup->type == IT_DUAL_LVDS) + of_set_property(np, "fsl,dual-channel", NULL, 0, 1); + + np = of_find_node_by_name(np, "lvds-channel@0"); + if (!np) + return -ENODEV; + + of_device_enable(np); + + if (!kernel_fixup) { + of_property_write_string(np, "fsl,data-mapping", + fixup->bus_format == BF_SPWG ? + "spwg" : "jeida"); + } + + return 0; +} + +static int rdu2_fixup_display(struct device_node *root, void *context) +{ + const struct rdu2_lru_fixup *fixup = context; + /* + * If the panel is eDP, just enable the parallel output and + * eDP bridge + */ + if (fixup->type == IT_EDP) + return rdu2_fixup_edp(root); + + return rdu2_fixup_lvds(root, context); +} + +static void rdu2_lru_fixup(const struct zii_pn_fixup *context) +{ + const struct rdu2_lru_fixup *fixup = + container_of(context, struct rdu2_lru_fixup, fixup); + + WARN_ON(rdu2_fixup_display(NULL, (void *)context)); + of_register_fixup(rdu2_fixup_display, (void *)context); + + if (fixup->flags & RDU2_LRU_FLAG_EGALAX) + of_register_fixup(rdu2_fixup_egalax_ts, NULL); + + if (fixup->flags & RDU2_LRU_FLAG_NO_FEC) + of_register_fixup(rdu2_fixup_dsa, NULL); +} + +#define RDU2_LRU_FIXUP(__pn, __flags, __panel) \ + { \ + { __pn, rdu2_lru_fixup }, \ + __flags, \ + __panel \ + } + +#define RDU2_PANEL_10P1 IT_SINGLE_LVDS, BF_SPWG, "innolux,g121i1-l01" +#define RDU2_PANEL_11P6 IT_EDP, BF_NONE, NULL +#define RDU2_PANEL_12P1 IT_SINGLE_LVDS, BF_SPWG, "nec,nl12880bc20-05" +#define RDU2_PANEL_13P3 IT_DUAL_LVDS, BF_JEIDA, "auo,g133han01" +#define RDU2_PANEL_15P6 IT_DUAL_LVDS, BF_SPWG, "nlt,nl192108ac18-02d" +#define RDU2_PANEL_18P5 IT_DUAL_LVDS, BF_SPWG, "auo,g185han01" +#define RDU2_PANEL_32P0 IT_DUAL_LVDS, BF_SPWG, "auo,p320hvn03" + +static const struct rdu2_lru_fixup rdu2_lru_fixups[] = { + RDU2_LRU_FIXUP("00-5122-01", RDU2_LRU_FLAG_NO_FEC, RDU2_PANEL_12P1), + RDU2_LRU_FIXUP("00-5122-02", RDU2_LRU_FLAG_NO_FEC, RDU2_PANEL_12P1), + RDU2_LRU_FIXUP("00-5120-01", 0, RDU2_PANEL_10P1), + RDU2_LRU_FIXUP("00-5120-02", 0, RDU2_PANEL_10P1), + RDU2_LRU_FIXUP("00-5120-51", 0, RDU2_PANEL_10P1), + RDU2_LRU_FIXUP("00-5120-52", 0, RDU2_PANEL_10P1), + RDU2_LRU_FIXUP("00-5123-01", 0, RDU2_PANEL_11P6), + RDU2_LRU_FIXUP("00-5123-02", 0, RDU2_PANEL_11P6), + RDU2_LRU_FIXUP("00-5123-03", 0, RDU2_PANEL_11P6), + RDU2_LRU_FIXUP("00-5123-51", 0, RDU2_PANEL_11P6), + RDU2_LRU_FIXUP("00-5123-52", 0, RDU2_PANEL_11P6), + RDU2_LRU_FIXUP("00-5123-53", 0, RDU2_PANEL_11P6), + RDU2_LRU_FIXUP("00-5124-01", 0, RDU2_PANEL_13P3), + RDU2_LRU_FIXUP("00-5124-02", 0, RDU2_PANEL_13P3), + RDU2_LRU_FIXUP("00-5124-03", 0, RDU2_PANEL_13P3), + RDU2_LRU_FIXUP("00-5124-53", 0, RDU2_PANEL_13P3), + RDU2_LRU_FIXUP("00-5127-01", 0, RDU2_PANEL_15P6), + RDU2_LRU_FIXUP("00-5127-02", 0, RDU2_PANEL_15P6), + RDU2_LRU_FIXUP("00-5127-03", 0, RDU2_PANEL_15P6), + RDU2_LRU_FIXUP("00-5127-53", 0, RDU2_PANEL_15P6), + RDU2_LRU_FIXUP("00-5125-01", 0, RDU2_PANEL_18P5), + RDU2_LRU_FIXUP("00-5125-02", 0, RDU2_PANEL_18P5), + RDU2_LRU_FIXUP("00-5125-03", 0, RDU2_PANEL_18P5), + RDU2_LRU_FIXUP("00-5125-53", 0, RDU2_PANEL_18P5), + RDU2_LRU_FIXUP("00-5132-01", RDU2_LRU_FLAG_EGALAX, RDU2_PANEL_32P0), + RDU2_LRU_FIXUP("00-5132-02", RDU2_LRU_FLAG_EGALAX, RDU2_PANEL_32P0), +}; + +/* + * This initcall needs to be executed before coredevices, so we have a chance + * to fix up the internal DT with the correct display information. + */ +static int rdu2_process_fixups(void) +{ + if (!of_machine_is_compatible("zii,imx6q-zii-rdu2") && + !of_machine_is_compatible("zii,imx6qp-zii-rdu2")) + return 0; - val = I210_CFGWORD_PCIID_157B; - pwrite(fd, &val, sizeof(val), 0); + zii_process_lru_fixups(rdu2_lru_fixups); return 0; } -late_initcall(rdu2_i210_invm); +postmmu_initcall(rdu2_process_fixups); diff --git a/arch/arm/boards/zii-imx8mq-dev/lowlevel.c b/arch/arm/boards/zii-imx8mq-dev/lowlevel.c index 059e4c9efd..0fd2ddfca5 100644 --- a/arch/arm/boards/zii-imx8mq-dev/lowlevel.c +++ b/arch/arm/boards/zii-imx8mq-dev/lowlevel.c @@ -145,7 +145,7 @@ ENTRY_FUNCTION(start_zii_imx8mq_dev, r0, r1, r2) unsigned int system_type; void *fdt; - arm_cpu_lowlevel_init(); + imx8mq_cpu_lowlevel_init(); if (IS_ENABLED(CONFIG_DEBUG_LL)) setup_uart(); diff --git a/arch/arm/boards/zii-vf610-dev/board.c b/arch/arm/boards/zii-vf610-dev/board.c index a8fa1ef61f..1296f70317 100644 --- a/arch/arm/boards/zii-vf610-dev/board.c +++ b/arch/arm/boards/zii-vf610-dev/board.c @@ -123,6 +123,7 @@ static int zii_vf610_dev_set_hostname(void) const char *hostname; } boards[] = { { "zii,vf610spu3", "spu3" }, + { "zii,vf610spb4", "spb4" }, { "zii,vf610cfu1", "cfu1" }, { "zii,vf610dev-b", "dev-rev-b" }, { "zii,vf610dev-c", "dev-rev-c" }, @@ -168,7 +169,8 @@ static int zii_vf610_register_emmc_bbu(void) int ret; if (!of_machine_is_compatible("zii,vf610spu3") && - !of_machine_is_compatible("zii,vf610cfu1")) + !of_machine_is_compatible("zii,vf610cfu1") && + !of_machine_is_compatible("zii,vf610spb4")) return 0; ret = vf610_bbu_internal_mmcboot_register_handler("eMMC", diff --git a/arch/arm/boards/zii-vf610-dev/lowlevel.c b/arch/arm/boards/zii-vf610-dev/lowlevel.c index d19318026c..79588ac381 100644 --- a/arch/arm/boards/zii-vf610-dev/lowlevel.c +++ b/arch/arm/boards/zii-vf610-dev/lowlevel.c @@ -41,6 +41,7 @@ enum zii_platform_vf610_type { ZII_PLATFORM_VF610_SSMB_SPU3 = 0x03, ZII_PLATFORM_VF610_CFU1 = 0x04, ZII_PLATFORM_VF610_DEV_REV_C = 0x05, + ZII_PLATFORM_VF610_SPB4 = 0x06, }; static unsigned int get_system_type(void) @@ -77,7 +78,8 @@ extern char __dtb_vf610_zii_dev_rev_b_start[]; extern char __dtb_vf610_zii_dev_rev_c_start[]; extern char __dtb_vf610_zii_cfu1_start[]; extern char __dtb_vf610_zii_ssmb_spu3_start[]; -extern char __dtb_vf610_zii_scu4_aib_rev_c_start[]; +extern char __dtb_vf610_zii_scu4_aib_start[]; +extern char __dtb_vf610_zii_spb4_start[]; ENTRY_FUNCTION(start_zii_vf610_dev, r0, r1, r2) { @@ -121,7 +123,7 @@ ENTRY_FUNCTION(start_zii_vf610_dev, r0, r1, r2) fdt = __dtb_vf610_zii_dev_rev_b_start; break; case ZII_PLATFORM_VF610_SCU4_AIB: - fdt = __dtb_vf610_zii_scu4_aib_rev_c_start; + fdt = __dtb_vf610_zii_scu4_aib_start; break; case ZII_PLATFORM_VF610_DEV_REV_C: fdt = __dtb_vf610_zii_dev_rev_c_start; @@ -132,6 +134,9 @@ ENTRY_FUNCTION(start_zii_vf610_dev, r0, r1, r2) case ZII_PLATFORM_VF610_SSMB_SPU3: fdt = __dtb_vf610_zii_ssmb_spu3_start; break; + case ZII_PLATFORM_VF610_SPB4: + fdt = __dtb_vf610_zii_spb4_start; + break; } vf610_barebox_entry(fdt + get_runtime_offset()); diff --git a/arch/arm/configs/kindle-mx50_defconfig b/arch/arm/configs/kindle-mx50_defconfig index 31bfc9c06b..95b505fda2 100644 --- a/arch/arm/configs/kindle-mx50_defconfig +++ b/arch/arm/configs/kindle-mx50_defconfig @@ -4,8 +4,8 @@ CONFIG_MACH_KINDLE_MX50=y CONFIG_THUMB2_BAREBOX=y CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y CONFIG_ARM_UNWIND=y +CONFIG_IMAGE_COMPRESSION_XZKERN=y CONFIG_MMU=y -CONFIG_MMU_EARLY=y CONFIG_MALLOC_SIZE=0x0 CONFIG_MALLOC_TLSF=y CONFIG_KALLSYMS=y @@ -13,7 +13,6 @@ CONFIG_RELOCATABLE=y CONFIG_HUSH_FANCY_PROMPT=y CONFIG_CMDLINE_EDITING=y CONFIG_AUTO_COMPLETE=y -CONFIG_FLEXIBLE_BOOTARGS=y CONFIG_BOOTM_SHOW_TYPE=y CONFIG_BOOTM_VERBOSE=y CONFIG_BOOTM_INITRD=y @@ -24,47 +23,42 @@ CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y CONFIG_CMD_DMESG=y CONFIG_LONGHELP=y CONFIG_CMD_MEMINFO=y -CONFIG_CMD_BOOT=y +CONFIG_CMD_REGULATOR=y +CONFIG_CMD_LOADY=y CONFIG_CMD_RESET=y -CONFIG_CMD_AUTOMOUNT=y CONFIG_CMD_EXPORT=y -CONFIG_CMD_GLOBAL=y CONFIG_CMD_PRINTENV=y CONFIG_CMD_MAGICVAR=y CONFIG_CMD_MAGICVAR_HELP=y +CONFIG_CMD_EDIT=y +CONFIG_CMD_MEMTEST=y +CONFIG_CMD_CLK=y CONFIG_CMD_DETECT=y CONFIG_CMD_FLASH=y CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_SPI=y -CONFIG_CMD_USB=y CONFIG_CMD_USBGADGET=y -CONFIG_CMD_OF_DUMP=y CONFIG_CMD_OFTREE=y CONFIG_OFDEVICE=y -CONFIG_OF_GPIO=y CONFIG_OF_BAREBOX_DRIVERS=y CONFIG_MTD=y -CONFIG_MTD_WRITE=y CONFIG_MTD_M25P80=y -CONFIG_MTD_SPI_NOR=y -CONFIG_USB=y CONFIG_USB_HOST=y CONFIG_USB_IMX_CHIPIDEA=y CONFIG_USB_EHCI=y CONFIG_USB_GADGET=y -CONFIG_USB_GADGET_DRIVER_ARC=y CONFIG_USB_GADGET_SERIAL=y CONFIG_USB_GADGET_FASTBOOT=y CONFIG_MCI=y -CONFIG_MCI_INFO=y -CONFIG_MCI_WRITE=y +CONFIG_MCI_STARTUP=y CONFIG_MCI_MMC_BOOT_PARTITIONS=y CONFIG_MCI_IMX_ESDHC=y -CONFIG_PINCTRL=y CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED=y CONFIG_GENERIC_PHY=y CONFIG_USB_NOP_XCEIV=y -CONFIG_FS_AUTOMOUNT=y -CONFIG_IMAGE_COMPRESSION_XZKERN=y +CONFIG_FS_EXT4=y +CONFIG_FS_FAT=y +CONFIG_FS_FAT_WRITE=y +CONFIG_FS_FAT_LFN=y diff --git a/arch/arm/configs/kindle3_defconfig b/arch/arm/configs/kindle3_defconfig index a4e08dfad0..98691c3a81 100644 --- a/arch/arm/configs/kindle3_defconfig +++ b/arch/arm/configs/kindle3_defconfig @@ -2,7 +2,6 @@ CONFIG_ARCH_IMX=y CONFIG_BAREBOX_MAX_IMAGE_SIZE=0x30000 CONFIG_MACH_KINDLE3=y CONFIG_IMX_IIM=y -CONFIG_ARCH_IMX_USBLOADER=y CONFIG_AEABI=y CONFIG_ARM_BOARD_APPEND_ATAG=y CONFIG_ARM_BOARD_PREPEND_ATAG=y @@ -10,6 +9,7 @@ CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y CONFIG_PBL_IMAGE=y CONFIG_PBL_RELOCATABLE=y CONFIG_IMAGE_COMPRESSION_XZKERN=y +CONFIG_MMU=y CONFIG_MALLOC_SIZE=0x2000000 CONFIG_MALLOC_TLSF=y CONFIG_RELOCATABLE=y @@ -64,3 +64,4 @@ CONFIG_FS_EXT4=y CONFIG_FS_FAT=y CONFIG_FS_FAT_WRITE=y CONFIG_FS_FAT_LFN=y +CONFIG_ARCH_IMX_USBLOADER=y diff --git a/arch/arm/configs/layerscape_defconfig b/arch/arm/configs/layerscape_defconfig new file mode 100644 index 0000000000..dadbcc214c --- /dev/null +++ b/arch/arm/configs/layerscape_defconfig @@ -0,0 +1,111 @@ +CONFIG_ARCH_LAYERSCAPE=y +CONFIG_MACH_LS1046ARDB=y +CONFIG_MACH_TQMLS1046A=y +CONFIG_MMU=y +CONFIG_MALLOC_SIZE=0x0 +CONFIG_MALLOC_TLSF=y +CONFIG_KALLSYMS=y +CONFIG_RELOCATABLE=y +CONFIG_HUSH_FANCY_PROMPT=y +CONFIG_CMDLINE_EDITING=y +CONFIG_AUTO_COMPLETE=y +CONFIG_MENU=y +CONFIG_BOOTM_SHOW_TYPE=y +CONFIG_BOOTM_VERBOSE=y +CONFIG_BOOTM_INITRD=y +CONFIG_BOOTM_OFTREE=y +CONFIG_BOOTM_OFTREE_UIMAGE=y +CONFIG_BLSPEC=y +CONFIG_CONSOLE_ACTIVATE_NONE=y +CONFIG_CONSOLE_ALLOW_COLOR=y +CONFIG_PBL_CONSOLE=y +CONFIG_PARTITION_DISK_EFI=y +CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y +CONFIG_RESET_SOURCE=y +CONFIG_DEBUG_LL=y +CONFIG_CMD_DMESG=y +CONFIG_LONGHELP=y +CONFIG_CMD_IOMEM=y +CONFIG_CMD_IMD=y +CONFIG_CMD_MEMINFO=y +CONFIG_CMD_REGULATOR=y +CONFIG_CMD_MMC_EXTCSD=y +CONFIG_CMD_GO=y +CONFIG_CMD_RESET=y +CONFIG_CMD_UIMAGE=y +CONFIG_CMD_PARTITION=y +CONFIG_CMD_EXPORT=y +CONFIG_CMD_LOADENV=y +CONFIG_CMD_PRINTENV=y +CONFIG_CMD_MAGICVAR=y +CONFIG_CMD_MAGICVAR_HELP=y +CONFIG_CMD_SAVEENV=y +CONFIG_CMD_FILETYPE=y +CONFIG_CMD_LN=y +CONFIG_CMD_MD5SUM=y +CONFIG_CMD_UNCOMPRESS=y +CONFIG_CMD_LET=y +CONFIG_CMD_MSLEEP=y +CONFIG_CMD_READF=y +CONFIG_CMD_SLEEP=y +CONFIG_CMD_DHCP=y +CONFIG_CMD_MIITOOL=y +CONFIG_CMD_PING=y +CONFIG_CMD_ECHO_E=y +CONFIG_CMD_EDIT=y +CONFIG_CMD_MENU=y +CONFIG_CMD_MENU_MANAGEMENT=y +CONFIG_CMD_MENUTREE=y +CONFIG_CMD_READLINE=y +CONFIG_CMD_TIMEOUT=y +CONFIG_CMD_CRC=y +CONFIG_CMD_CRC_CMP=y +CONFIG_CMD_MEMTEST=y +CONFIG_CMD_MM=y +CONFIG_CMD_CLK=y +CONFIG_CMD_DETECT=y +CONFIG_CMD_FLASH=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y +CONFIG_CMD_LED=y +CONFIG_CMD_SPI=y +CONFIG_CMD_LED_TRIGGER=y +CONFIG_CMD_WD=y +CONFIG_CMD_BAREBOX_UPDATE=y +CONFIG_CMD_OF_NODE=y +CONFIG_CMD_OF_PROPERTY=y +CONFIG_CMD_OFTREE=y +CONFIG_CMD_TIME=y +CONFIG_NET=y +CONFIG_NET_NETCONSOLE=y +CONFIG_OFDEVICE=y +CONFIG_OF_BAREBOX_DRIVERS=y +CONFIG_DRIVER_SERIAL_NS16550=y +CONFIG_DRIVER_NET_FSL_FMAN=y +CONFIG_DP83867_PHY=y +CONFIG_REALTEK_PHY=y +CONFIG_NET_DSA_MV88E6XXX=y +CONFIG_I2C=y +CONFIG_I2C_IMX=y +CONFIG_MCI=y +CONFIG_MCI_MMC_BOOT_PARTITIONS=y +CONFIG_MCI_IMX_ESDHC=y +CONFIG_LED=y +CONFIG_LED_GPIO=y +CONFIG_LED_GPIO_OF=y +CONFIG_LED_TRIGGERS=y +CONFIG_EEPROM_AT25=y +CONFIG_EEPROM_AT24=y +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_IMX=y +CONFIG_NVMEM=y +CONFIG_REGULATOR=y +CONFIG_REGULATOR_FIXED=y +CONFIG_FS_EXT4=y +CONFIG_FS_TFTP=y +CONFIG_FS_NFS=y +CONFIG_FS_FAT=y +CONFIG_FS_FAT_WRITE=y +CONFIG_FS_FAT_LFN=y +CONFIG_ZLIB=y +CONFIG_LZO_DECOMPRESS=y diff --git a/arch/arm/configs/stm32mp1_defconfig b/arch/arm/configs/stm32mp1_defconfig new file mode 100644 index 0000000000..2922ce3632 --- /dev/null +++ b/arch/arm/configs/stm32mp1_defconfig @@ -0,0 +1,98 @@ +CONFIG_ARCH_STM32MP1=y +CONFIG_MACH_STM32MP157C_DK2=y +CONFIG_THUMB2_BAREBOX=y +CONFIG_ARM_BOARD_APPEND_ATAG=y +CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y +CONFIG_ARM_UNWIND=y +CONFIG_ARM_PSCI=y +CONFIG_MMU=y +CONFIG_MALLOC_SIZE=0x0 +CONFIG_MALLOC_TLSF=y +CONFIG_KALLSYMS=y +CONFIG_RELOCATABLE=y +CONFIG_HUSH_FANCY_PROMPT=y +CONFIG_CMDLINE_EDITING=y +CONFIG_AUTO_COMPLETE=y +CONFIG_MENU=y +CONFIG_BOOTM_SHOW_TYPE=y +CONFIG_BOOTM_VERBOSE=y +CONFIG_BOOTM_INITRD=y +CONFIG_BOOTM_OFTREE=y +CONFIG_BOOTM_OFTREE_UIMAGE=y +CONFIG_BLSPEC=y +CONFIG_CONSOLE_ACTIVATE_NONE=y +CONFIG_CONSOLE_ALLOW_COLOR=y +CONFIG_PBL_CONSOLE=y +CONFIG_PARTITION=y +CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y +CONFIG_POLLER=y +CONFIG_RESET_SOURCE=y +CONFIG_DEBUG_INITCALLS=y +CONFIG_CMD_DMESG=y +CONFIG_LONGHELP=y +CONFIG_CMD_IOMEM=y +CONFIG_CMD_IMD=y +CONFIG_CMD_MEMINFO=y +CONFIG_CMD_ARM_MMUINFO=y +# CONFIG_CMD_BOOTU is not set +CONFIG_CMD_GO=y +CONFIG_CMD_RESET=y +CONFIG_CMD_UIMAGE=y +CONFIG_CMD_PARTITION=y +CONFIG_CMD_EXPORT=y +CONFIG_CMD_LOADENV=y +CONFIG_CMD_PRINTENV=y +CONFIG_CMD_MAGICVAR=y +CONFIG_CMD_MAGICVAR_HELP=y +CONFIG_CMD_SAVEENV=y +CONFIG_CMD_FILETYPE=y +CONFIG_CMD_LN=y +CONFIG_CMD_MD5SUM=y +CONFIG_CMD_UNCOMPRESS=y +CONFIG_CMD_LET=y +CONFIG_CMD_MSLEEP=y +CONFIG_CMD_READF=y +CONFIG_CMD_SLEEP=y +CONFIG_CMD_DHCP=y +CONFIG_CMD_MIITOOL=y +CONFIG_CMD_PING=y +CONFIG_CMD_TFTP=y +CONFIG_CMD_ECHO_E=y +CONFIG_CMD_EDIT=y +CONFIG_CMD_MENU=y +CONFIG_CMD_MENU_MANAGEMENT=y +CONFIG_CMD_MENUTREE=y +CONFIG_CMD_READLINE=y +CONFIG_CMD_TIMEOUT=y +CONFIG_CMD_CRC=y +CONFIG_CMD_CRC_CMP=y +CONFIG_CMD_MEMTEST=y +CONFIG_CMD_MM=y +CONFIG_CMD_CLK=y +CONFIG_CMD_DETECT=y +CONFIG_CMD_FLASH=y +CONFIG_CMD_BAREBOX_UPDATE=y +CONFIG_CMD_OF_NODE=y +CONFIG_CMD_OF_PROPERTY=y +CONFIG_CMD_OFTREE=y +CONFIG_CMD_TIME=y +CONFIG_NET=y +CONFIG_NET_NETCONSOLE=y +CONFIG_OFDEVICE=y +CONFIG_OF_BAREBOX_DRIVERS=y +CONFIG_DRIVER_SERIAL_STM32=y +CONFIG_DRIVER_NET_DESIGNWARE=y +CONFIG_DRIVER_NET_DESIGNWARE_GENERIC=y +CONFIG_AT803X_PHY=y +CONFIG_MICREL_PHY=y +# CONFIG_SPI is not set +# CONFIG_PINCTRL is not set +CONFIG_FS_EXT4=y +CONFIG_FS_TFTP=y +CONFIG_FS_NFS=y +CONFIG_FS_FAT=y +CONFIG_FS_FAT_WRITE=y +CONFIG_FS_FAT_LFN=y +CONFIG_ZLIB=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_CRC8=y diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index f989df6b0c..1c6129816d 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -89,6 +89,7 @@ pbl-dtb-$(CONFIG_MACH_SOLIDRUN_CUBOX) += dove-cubox-bb.dtb.o pbl-dtb-$(CONFIG_MACH_SOLIDRUN_MICROSOM) += imx6dl-hummingboard.dtb.o imx6q-hummingboard.dtb.o \ imx6dl-hummingboard2.dtb.o imx6q-hummingboard2.dtb.o \ imx6q-h100.dtb.o +pbl-dtb-$(CONFIG_MACH_STM32MP157C_DK2) += stm32mp157c-dk2.dtb.o pbl-dtb-$(CONFIG_MACH_TECHNEXION_WANDBOARD) += imx6q-wandboard.dtb.o imx6dl-wandboard.dtb.o pbl-dtb-$(CONFIG_MACH_TECHNEXION_PICO_HOBBIT) += imx6ul-pico-hobbit.dtb.o pbl-dtb-$(CONFIG_MACH_NXP_IMX6ULL_EVK) += imx6ull-14x14-evk.dtb.o @@ -123,7 +124,8 @@ pbl-dtb-$(CONFIG_MACH_ZII_VF610_DEV) += \ vf610-zii-dev-rev-c.dtb.o \ vf610-zii-cfu1.dtb.o \ vf610-zii-ssmb-spu3.dtb.o \ - vf610-zii-scu4-aib-rev-c.dtb.o + vf610-zii-scu4-aib.dtb.o \ + vf610-zii-spb4.dtb.o pbl-dtb-$(CONFIG_MACH_AT91SAM9263EK_DT) += at91sam9263ek.dtb.o pbl-dtb-$(CONFIG_MACH_MICROCHIP_KSZ9477_EVB) += at91-microchip-ksz9477-evb.dtb.o pbl-dtb-$(CONFIG_MACH_AT91SAM9X5EK) += at91sam9x5ek.dtb.o @@ -131,5 +133,7 @@ pbl-dtb-$(CONFIG_MACH_XILINX_ZCU104) += zynqmp-zcu104-revA.dtb.o pbl-dtb-$(CONFIG_MACH_ZII_IMX7D_RPU2) += imx7d-zii-rpu2.dtb.o pbl-dtb-$(CONFIG_MACH_WAGO_PFC_AM35XX) += am35xx-pfc-750_820x.dtb.o +pbl-dtb-$(CONFIG_MACH_LS1046ARDB) += fsl-ls1046a-rdb.dtb.o +pbl-dtb-$(CONFIG_MACH_TQMLS1046A) += fsl-tqmls1046a-mbls10xxa.dtb.o clean-files := *.dtb *.dtb.S .*.dtc .*.pre .*.dts *.dtb.lzo diff --git a/arch/arm/dts/am335x-afi-gf.dts b/arch/arm/dts/am335x-afi-gf.dts index d0860b8905..961fe2e241 100644 --- a/arch/arm/dts/am335x-afi-gf.dts +++ b/arch/arm/dts/am335x-afi-gf.dts @@ -367,10 +367,6 @@ status = "okay"; }; -&phy_sel { - rmii-clock-ext; -}; - &am33xx_pinmux { dcan0_pins: pinmux_dcan0_pins { pinctrl-single,pins = < diff --git a/arch/arm/dts/am335x-baltos-minimal.dts b/arch/arm/dts/am335x-baltos-minimal.dts index f939cf6406..137c177b2f 100644 --- a/arch/arm/dts/am335x-baltos-minimal.dts +++ b/arch/arm/dts/am335x-baltos-minimal.dts @@ -423,10 +423,6 @@ dual_emac_res_vlan = <2>; }; -&phy_sel { - rmii-clock-ext = <1>; -}; - &mmc1 { pinctrl-names = "default"; pinctrl-0 = <&mmc1_pins>; diff --git a/arch/arm/dts/am335x-phytec-phycard-som.dtsi b/arch/arm/dts/am335x-phytec-phycard-som.dtsi index 2320ca1807..1d45d60dc0 100644 --- a/arch/arm/dts/am335x-phytec-phycard-som.dtsi +++ b/arch/arm/dts/am335x-phytec-phycard-som.dtsi @@ -128,10 +128,6 @@ }; }; -&phy_sel { - rmii-clock-ext; -}; - &cpsw_emac0 { phy-handle = <&phy0>; phy-mode = "rmii"; diff --git a/arch/arm/dts/am335x-phytec-phycore-som.dtsi b/arch/arm/dts/am335x-phytec-phycore-som.dtsi index 0601f5ab7b..ae3f70acdd 100644 --- a/arch/arm/dts/am335x-phytec-phycore-som.dtsi +++ b/arch/arm/dts/am335x-phytec-phycore-som.dtsi @@ -250,10 +250,6 @@ }; }; -&phy_sel { - rmii-clock-ext; -}; - &cpsw_emac0 { phy-handle = <&phy0>; phy-mode = "rmii"; diff --git a/arch/arm/dts/am335x-phytec-phyflex-som.dtsi b/arch/arm/dts/am335x-phytec-phyflex-som.dtsi index 4d0a913988..0325c81346 100644 --- a/arch/arm/dts/am335x-phytec-phyflex-som.dtsi +++ b/arch/arm/dts/am335x-phytec-phyflex-som.dtsi @@ -207,10 +207,6 @@ }; }; -&phy_sel { - rmii-clock-ext; -}; - &cpsw_emac0 { phy-handle = <&phy0>; phy-mode = "rgmii"; diff --git a/arch/arm/dts/fsl-ls1046a-rdb.dts b/arch/arm/dts/fsl-ls1046a-rdb.dts new file mode 100644 index 0000000000..e16948bc8a --- /dev/null +++ b/arch/arm/dts/fsl-ls1046a-rdb.dts @@ -0,0 +1,98 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include <arm64/freescale/fsl-ls1046a-rdb.dts> + +/ { + chosen { + stdout-path = &duart0; + + environment { + compatible = "barebox,environment"; + device-path = &environment_sd; + }; + }; + + aliases { + mmc0 = &esdhc; + }; +}; + +&esdhc { + #address-cells = <1>; + #size-cells = <1>; + + environment_sd: partition@200000 { + label = "barebox-environment"; + reg = <0x200000 0x20000>; + }; +}; + +&fman0 { + ethernet@e0000 { + status = "disabled"; + }; + + ethernet@e2000 { + status = "disabled"; + }; + + ethernet@e4000 { + phy-mode = "rgmii-id"; + }; + + ethernet@e6000 { + phy-mode = "rgmii-id"; + }; + + ethernet@e8000 { + }; + + ethernet@ea000 { + }; + + ethernet@f0000 { + }; + + ethernet@f2000 { + }; + + mdio@fc000 { + }; + + mdio@fd000 { + }; + + mdio@e1000 { + status = "disabled"; + }; + + mdio@e3000 { + status = "disabled"; + }; + + mdio@e5000 { + status = "disabled"; + }; + + mdio@e7000 { + status = "disabled"; + }; + + mdio@e9000 { + status = "disabled"; + }; + + mdio@eb000 { + status = "disabled"; + }; + + mdio@f1000 { + status = "disabled"; + }; + + mdio@f3000 { + status = "disabled"; + }; +}; diff --git a/arch/arm/dts/fsl-tqmls1046a-mbls10xxa.dts b/arch/arm/dts/fsl-tqmls1046a-mbls10xxa.dts new file mode 100644 index 0000000000..f21479eef8 --- /dev/null +++ b/arch/arm/dts/fsl-tqmls1046a-mbls10xxa.dts @@ -0,0 +1,240 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree Include file for TQMLS1046A SoM on MBLS10xxA from TQ + * + * Copyright 2018 TQ-Systems GmbH + */ + +/dts-v1/; + +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/gpio.h> + +#include "fsl-tqmls1046a.dtsi" + +/ { + model = "TQ TQMLS1046A SoM on MBLS10xxA board"; + compatible = "tqc,tqmls1046a", "fsl,ls1046a"; + + aliases { + serial0 = &duart0; + serial1 = &duart1; + mmc0 = &esdhc; + }; + + chosen { + stdout-path = "serial1:115200n8"; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + gpio-keys,name = "gpio-keys"; + poll-interval = <100>; + autorepeat; + + button0 { + label = "button0"; + gpios = <&gpioexp3 5 GPIO_ACTIVE_LOW>; + linux,code = <KEY_F1>; + }; + + button1 { + label = "button1"; + gpios = <&gpioexp3 6 GPIO_ACTIVE_LOW>; + linux,code = <KEY_F2>; + }; + }; + + leds { + compatible = "gpio-leds"; + + user { + gpios = <&gpioexp3 13 GPIO_ACTIVE_LOW>; + label = "led:user"; + linux,default-trigger = "heartbeat"; + }; + }; + +}; + + +&duart0 { + status = "okay"; +}; + +&duart1 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; + + i2c-mux@70 { + compatible = "nxp,pca9544"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0>; + + gpioexp1: pca9555@20 { + compatible = "nxp,pca9555"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpioexp2: pca9555@21 { + compatible = "nxp,pca9555"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpioexp3: pca9555@22 { + compatible = "nxp,pca9555"; + reg = <0x22>; + gpio-controller; + #gpio-cells = <2>; + }; + }; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x1>; + }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2>; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x3>; + }; + }; +}; + +&usb1 { + dr_mode = "otg"; +}; + +#include <arm64/freescale/fsl-ls1046-post.dtsi> +#include <dt-bindings/net/ti-dp83867.h> + +&fman0 { + status = "okay"; + + ethernet@e0000 { + status = "disabled"; + }; + + ethernet@e2000 { + phy-handle = <&qsgmii1_phy2>; + phy-connection-type = "sgmii"; + }; + + ethernet@e4000 { + phy-handle = <&rgmii_phy1>; + phy-connection-type = "rgmii"; + phy-mode = "rgmii-id"; + }; + + ethernet@e6000 { + phy-handle = <&rgmii_phy2>; + phy-connection-type = "rgmii"; + phy-mode = "rgmii-id"; + }; + + ethernet@e8000 { + status = "disabled"; + }; + + ethernet@ea000 { + phy-handle = <&qsgmii2_phy2>; + phy-connection-type = "sgmii"; + }; + + ethernet@f0000 { + phy-handle = <&qsgmii1_phy1>; + phy-connection-type = "sgmii"; + }; + + ethernet@f2000 { + phy-handle = <&qsgmii2_phy1>; + phy-connection-type = "sgmii"; + }; + + mdio@e1000 { + status = "disabled"; + }; + + mdio@e3000 { + status = "disabled"; + }; + + mdio@e5000 { + status = "disabled"; + }; + + mdio@e7000 { + status = "disabled"; + }; + + mdio@e9000 { + status = "disabled"; + }; + + mdio@eb000 { + status = "disabled"; + }; + + mdio@f1000 { + status = "disabled"; + }; + + mdio@f3000 { + status = "disabled"; + }; + + mdio@fc000 { + rgmii_phy1: ethernet-phy@0e { + reg = <0x0e>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_1_50_NS>; + ti,tx-internal-delay = <DP83867_RGMIIDCTL_1_50_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>; + }; + + qsgmii1_phy1: ethernet-phy@1c { + reg = <0x1c>; + }; + + qsgmii1_phy2: ethernet-phy@1d { + reg = <0x1d>; + }; + }; + + mdio@fd000 { + rgmii_phy2: ethernet-phy@0c { + reg = <0x0c>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_1_50_NS>; + ti,tx-internal-delay = <DP83867_RGMIIDCTL_1_50_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>; + }; + + qsgmii2_phy1: ethernet-phy@00 { + reg = <0x00>; + }; + + qsgmii2_phy2: ethernet-phy@01 { + reg = <0x01>; + }; + }; +}; diff --git a/arch/arm/dts/fsl-tqmls1046a.dtsi b/arch/arm/dts/fsl-tqmls1046a.dtsi new file mode 100644 index 0000000000..4717e66857 --- /dev/null +++ b/arch/arm/dts/fsl-tqmls1046a.dtsi @@ -0,0 +1,54 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree Include file for LS1046A based SoM of TQ + * + * Copyright 2018 TQ-Systems GmbH + */ + +#include <arm64/freescale/fsl-ls1046a.dtsi> + +&i2c0 { + status = "okay"; + + temp-sensor@18 { + compatible = "jc42"; + reg = <0x18>; + }; + + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + }; + + rtc@51 { + compatible = "nxp,pcf85063"; + reg = <0x51>; + }; + + eeprom@57 { + compatible = "atmel,24c256"; + reg = <0x57>; + }; +}; + +&qspi { + num-cs = <2>; + bus-num = <0>; + status = "okay"; + + qflash0: mx66u51235f@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + spi-max-frequency = <108000000>; + reg = <0>; + }; + + qflash1: mx66u51235f@1 { + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <108000000>; + compatible = "jedec,spi-nor"; + reg = <1>; + }; +}; diff --git a/arch/arm/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/dts/imx6qdl-phytec-pfla02.dtsi index aba86a3ec1..f0bba2e098 100644 --- a/arch/arm/dts/imx6qdl-phytec-pfla02.dtsi +++ b/arch/arm/dts/imx6qdl-phytec-pfla02.dtsi @@ -86,23 +86,6 @@ }; }; -&fec { - phy-handle = <ðphy>; - phy-reset-duration = <10>; /* in msecs */ - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - ethphy: ethernet-phy@3 { - reg = <3>; - - txc-skew-ps = <1680>; - rxc-skew-ps = <1860>; - }; - }; -}; - &gpmi { partitions { compatible = "fixed-partitions"; diff --git a/arch/arm/dts/imx6qdl-zii-rdu2.dtsi b/arch/arm/dts/imx6qdl-zii-rdu2.dtsi index fea219f1e1..bfc75ba606 100644 --- a/arch/arm/dts/imx6qdl-zii-rdu2.dtsi +++ b/arch/arm/dts/imx6qdl-zii-rdu2.dtsi @@ -49,6 +49,11 @@ }; }; + device-info { + nvmem-cells = <&lru_part_number>; + nvmem-cell-names = "lru-part-number"; + }; + aliases { ethernet0 = &fec; ethernet1 = &i210; @@ -59,8 +64,96 @@ */ switch-eeprom = &switch; }; -}; + panel { + compatible = "simple-panel"; + /* Timings for all supported panels, the correct one is enabled + * after the board data has been retrieved from the environment + * controller + */ + + display-timings { + innolux-g121i1-l01 { + compatible = "innolux,g121i1-l01"; + + hback-porch = <79>; + hfront-porch = <80>; + hactive = <1280>; + hsync-len = <1>; + vback-porch = <11>; + vfront-porch = <11>; + vactive = <800>; + vsync-len = <1>; + clock-frequency = <71000000>; + }; + nec-nl12880bc20-05 { + compatible = "nec,nl12880bc20-05"; + + hback-porch = <100>; + hfront-porch = <30>; + hactive = <1280>; + hsync-len = <30>; + vback-porch = <11>; + vfront-porch = <5>; + vactive = <800>; + vsync-len = <7>; + clock-frequency = <71000000>; + }; + auo-g133han01 { + compatible = "auo,g133han01"; + + hback-porch = <88>; + hfront-porch = <58>; + hactive = <1920>; + hsync-len = <42>; + vback-porch = <14>; + vfront-porch = <8>; + vactive = <1080>; + vsync-len = <14>; + clock-frequency = <141200000>; + }; + auo-g185han01 { + compatible = "auo,g185han01"; + + hback-porch = <44>; + hfront-porch = <60>; + hactive = <1920>; + hsync-len = <24>; + vback-porch = <5>; + vfront-porch = <10>; + vactive = <1080>; + vsync-len = <5>; + clock-frequency = <144000000>; + }; + nlt-nl192108ac18-02d { + compatible = "nlt,nl192108ac18-02d"; + + hback-porch = <120>; + hfront-porch = <100>; + hactive = <1920>; + hsync-len = <60>; + vback-porch = <10>; + vfront-porch = <30>; + vactive = <1080>; + vsync-len = <5>; + clock-frequency = <148350000>; + }; + auo-p320hvn03 { + compatible = "auo,p320hvn03"; + + hback-porch = <50>; + hfront-porch = <50>; + hactive = <1920>; + hsync-len = <40>; + vback-porch = <17>; + vfront-porch = <17>; + vactive = <1080>; + vsync-len = <11>; + clock-frequency = <148500000>; + }; + }; + }; +}; &uart4 { rave-sp { @@ -73,6 +166,11 @@ }; eeprom@a4 { + lru_part_number: lru-part-number@21 { + reg = <0x21 15>; + read-only; + }; + boot_source: boot-source@83 { reg = <0x83 1>; }; @@ -110,12 +208,38 @@ nvmem-cell-names = "mac-address"; }; +&i2c1 { + edp-bridge@68 { + pinctrl-0 = <&pinctrl_tc358767>, <&pinctrl_disp0>; + + ports { + port@1 { + reg = <1>; + + tc358767_in: endpoint { + remote-endpoint = <&disp0_out>; + }; + }; + }; + }; +}; + &i2c2 { temp-sense@48 { barebox,sensor-name = "Temp Sensor 1"; }; }; +&ipu1_di0_disp0 { + remote-endpoint = <&tc358767_in>; +}; + +&ldb { + lvds-channel@0 { + fsl,data-width = <24>; + }; +}; + &i210 { nvmem-cells = <&mac_address_1>; nvmem-cell-names = "mac-address"; diff --git a/arch/arm/dts/imx8mq-phytec-phycore-som.dts b/arch/arm/dts/imx8mq-phytec-phycore-som.dts index de8ed1873f..736c007f49 100644 --- a/arch/arm/dts/imx8mq-phytec-phycore-som.dts +++ b/arch/arm/dts/imx8mq-phytec-phycore-som.dts @@ -205,6 +205,13 @@ }; }; +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + &iomuxc { pinctrl_fec1: fec1grp { fsl,pins = < @@ -325,4 +332,10 @@ MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1 >; }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 + >; + }; }; diff --git a/arch/arm/dts/imx8mq.dtsi b/arch/arm/dts/imx8mq.dtsi index d6a4c715bd..d1d8bdaa0e 100644 --- a/arch/arm/dts/imx8mq.dtsi +++ b/arch/arm/dts/imx8mq.dtsi @@ -16,7 +16,6 @@ gpio4 = &gpio5; mmc0 = &usdhc1; mmc1 = &usdhc2; - spi0 = &ecspi1; }; thermal-zones { @@ -113,136 +112,6 @@ reg = <0x30390000 0x10000>; #reset-cells = <1>; }; - - gpc: gpc@303a0000 { - compatible = "fsl,imx8mq-gpc", "fsl,imx7d-gpc"; - reg = <0x303a0000 0x10000>; - #power-domain-cells = <1>; - - interrupt-controller; - interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; - #interrupt-cells = <3>; - interrupt-parent = <&gic>; - - pgc { - #address-cells = <1>; - #size-cells = <0>; - - /* - * As per comment in ATF source code: - * - * PCIE1 and PCIE2 share the - * same reset signal, if we power - * down PCIE2, PCIE1 will be held - * in reset too. - * - * So instead of creating two - * separate power domains for - * PCIE1 and PCIE2. We create - * a link between 1 and 10 and - * use what was supposed to be - * domain 1 as a shared PCIE - * power domain powering both - * PCIE1 and PCIE2 at the same - * time - */ - pgc_pcie_phy: gpc_power_domain@1 { - #power-domain-cells = <0>; - reg = <1>; - power-domains = <&pgc_pcie2_phy>; - }; - - pgc_otg1: power-domain@2 { - #power-domain-cells = <0>; - reg = <2>; - }; - - pgc_otg2: power-domain@3 { - #power-domain-cells = <0>; - reg = <3>; - }; - - pgc_pcie2_phy: gpc_power_domain@10 { - #power-domain-cells = <0>; - reg = <10>; - }; - }; - }; - }; - - bus@30800000 { - ecspi1: ecspi@30820000 { - compatible = "fsl,imx8mq-ecspi", "fsl,imx51-ecspi"; - reg = <0x30820000 0x10000>; - interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MQ_CLK_ECSPI1_ROOT>, - <&clk IMX8MQ_CLK_ECSPI1_ROOT>; - clock-names = "ipg", "per"; - status = "disabled"; - }; - }; - - - usb_dwc3_0: usb@38100000 { - compatible = "fsl,imx8mq-dwc3", "snps,dwc3"; - reg = <0x38100000 0x10000>; - clocks = <&clk IMX8MQ_CLK_USB_BUS>, - <&clk IMX8MQ_CLK_USB_CORE_REF>, - <&clk IMX8MQ_CLK_USB1_CTRL_ROOT>; - clock-names = "bus_early", "ref", "suspend"; - assigned-clocks = <&clk IMX8MQ_CLK_USB_BUS>, - <&clk IMX8MQ_CLK_USB_CORE_REF>; - assigned-clock-parents = <&clk IMX8MQ_SYS2_PLL_500M>, - <&clk IMX8MQ_SYS1_PLL_100M>; - assigned-clock-rates = <500000000>, <100000000>; - interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; - phys = <&usb3_phy0>, <&usb3_phy0>; - phy-names = "usb2-phy", "usb3-phy"; - power-domains = <&pgc_otg1>; - status = "disabled"; - }; - - usb3_phy0: phy@381f0040 { - compatible = "fsl,imx8mq-usb-phy"; - reg = <0x381f0040 0x40>; - clocks = <&clk IMX8MQ_CLK_USB1_PHY_ROOT>; - clock-names = "phy"; - assigned-clocks = <&clk IMX8MQ_CLK_USB_PHY_REF>; - assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_100M>; - assigned-clock-rates = <100000000>; - #phy-cells = <0>; - status = "disabled"; - }; - - usb_dwc3_1: usb@38200000 { - compatible = "fsl,imx8mq-dwc3", "snps,dwc3"; - reg = <0x38200000 0x10000>; - clocks = <&clk IMX8MQ_CLK_USB_BUS>, - <&clk IMX8MQ_CLK_USB_CORE_REF>, - <&clk IMX8MQ_CLK_USB2_CTRL_ROOT>; - clock-names = "bus_early", "ref", "suspend"; - assigned-clocks = <&clk IMX8MQ_CLK_USB_BUS>, - <&clk IMX8MQ_CLK_USB_CORE_REF>; - assigned-clock-parents = <&clk IMX8MQ_SYS2_PLL_500M>, - <&clk IMX8MQ_SYS1_PLL_100M>; - assigned-clock-rates = <500000000>, <100000000>; - interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; - phys = <&usb3_phy1>, <&usb3_phy1>; - phy-names = "usb2-phy", "usb3-phy"; - power-domains = <&pgc_otg2>; - status = "disabled"; - }; - - usb3_phy1: phy@382f0040 { - compatible = "fsl,imx8mq-usb-phy"; - reg = <0x382f0040 0x40>; - clocks = <&clk IMX8MQ_CLK_USB2_PHY_ROOT>; - clock-names = "phy"; - assigned-clocks = <&clk IMX8MQ_CLK_USB_PHY_REF>; - assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_100M>; - assigned-clock-rates = <100000000>; - #phy-cells = <0>; - status = "disabled"; }; pcie0: pcie@33800000 { @@ -266,7 +135,7 @@ <0 0 0 3 &gic GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, <0 0 0 4 &gic GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; fsl,max-link-speed = <2>; - power-domains = <&pgc_pcie_phy>; + power-domains = <&pgc_pcie1>; resets = <&src IMX8MQ_RESET_PCIEPHY>, <&src IMX8MQ_RESET_PCIE_CTRL_APPS_EN>, <&src IMX8MQ_RESET_PCIE_CTRL_APPS_TURNOFF>; @@ -295,7 +164,7 @@ <0 0 0 3 &gic GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>, <0 0 0 4 &gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; fsl,max-link-speed = <2>; - power-domains = <&pgc_pcie_phy>; + power-domains = <&pgc_pcie1>; resets = <&src IMX8MQ_RESET_PCIEPHY2>, <&src IMX8MQ_RESET_PCIE2_CTRL_APPS_EN>, <&src IMX8MQ_RESET_PCIE2_CTRL_APPS_TURNOFF>; diff --git a/arch/arm/dts/stm32mp157a-dk1.dts b/arch/arm/dts/stm32mp157a-dk1.dts new file mode 100644 index 0000000000..741284a444 --- /dev/null +++ b/arch/arm/dts/stm32mp157a-dk1.dts @@ -0,0 +1,62 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2018 - All Rights Reserved + * Author: Alexandre Torgue <alexandre.torgue@st.com>. + */ + +/dts-v1/; + +#include "stm32mp157c.dtsi" +#include <arm/stm32mp157c.dtsi> +#include <arm/stm32mp157-pinctrl.dtsi> + +/ { + model = "STMicroelectronics STM32MP157A-DK1 Discovery Board"; + compatible = "st,stm32mp157a-dk1", "st,stm32mp157"; + + aliases { + ethernet0 = ðernet0; + serial0 = &uart4; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + sram: sram@10050000 { + compatible = "mmio-sram"; + reg = <0x10050000 0x10000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x10050000 0x10000>; + + dma_pool: dma_pool@0 { + reg = <0x0 0x10000>; + pool; + }; + }; +}; + +ðernet0 { + status = "okay"; + pinctrl-0 = <ðernet0_rgmii_pins_a>; + pinctrl-names = "default", "sleep"; + phy-mode = "rgmii"; + max-speed = <1000>; + phy-handle = <&phy0>; + + mdio0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + phy0: ethernet-phy@0 { + reg = <0>; + }; + }; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins_a>; + status = "okay"; +}; diff --git a/arch/arm/dts/stm32mp157c-dk2.dts b/arch/arm/dts/stm32mp157c-dk2.dts new file mode 100644 index 0000000000..7565cabc3d --- /dev/null +++ b/arch/arm/dts/stm32mp157c-dk2.dts @@ -0,0 +1,14 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2018 - All Rights Reserved + * Author: Alexandre Torgue <alexandre.torgue@st.com>. + */ + +/dts-v1/; + +#include "stm32mp157a-dk1.dts" + +/ { + model = "STMicroelectronics STM32MP157C-DK2 Discovery Board"; + compatible = "st,stm32mp157c-dk2", "st,stm32mp157"; +}; diff --git a/arch/arm/dts/stm32mp157c.dtsi b/arch/arm/dts/stm32mp157c.dtsi new file mode 100644 index 0000000000..fa0d00ff02 --- /dev/null +++ b/arch/arm/dts/stm32mp157c.dtsi @@ -0,0 +1,7 @@ + +/ { + clocks { + /* Needed to let barebox find the clock nodes */ + compatible = "simple-bus"; + }; +}; diff --git a/arch/arm/dts/vf610-zii-scu4-aib-rev-c.dts b/arch/arm/dts/vf610-zii-scu4-aib-rev-c.dts deleted file mode 100644 index 12c2568bcc..0000000000 --- a/arch/arm/dts/vf610-zii-scu4-aib-rev-c.dts +++ /dev/null @@ -1,459 +0,0 @@ -/* - * Copyright (C) 2015, 2016 Zodiac Inflight Innovations - * - * Based on an original 'vf610-twr.dts' which is Copyright 2015, - * Freescale Semiconductor, Inc. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/dts-v1/; - -#include <arm/vf610-zii-dev.dtsi> - -#include "vf610-zii-dev.dtsi" - -/ { - model = "ZII VF610 SCU4 AIB, Rev C"; - compatible = "zii,vf610scu4-aib-c", "zii,vf610dev", "fsl,vf610"; - - chosen { - bootargs = "console=ttyLP0,115200n8"; - }; - - gpio-leds { - debug { - gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>; - }; - }; - - mdio-mux { - compatible = "mdio-mux-gpio"; - pinctrl-0 = <&pinctrl_mdio_mux>; - pinctrl-names = "default"; - gpios = <&gpio4 4 GPIO_ACTIVE_HIGH - &gpio4 5 GPIO_ACTIVE_HIGH - &gpio3 30 GPIO_ACTIVE_HIGH - &gpio3 31 GPIO_ACTIVE_HIGH>; - mdio-parent-bus = <&mdio1>; - #address-cells = <1>; - #size-cells = <0>; - - mdio_mux_1: mdio@1 { - reg = <1>; - #address-cells = <1>; - #size-cells = <0>; - }; - - mdio_mux_2: mdio@2 { - reg = <2>; - #address-cells = <1>; - #size-cells = <0>; - }; - - mdio_mux_4: mdio@4 { - reg = <4>; - #address-cells = <1>; - #size-cells = <0>; - }; - - mdio_mux_8: mdio@8 { - reg = <8>; - #address-cells = <1>; - #size-cells = <0>; - }; - }; - - spi2 { - compatible = "spi-gpio"; - pinctrl-0 = <&pinctrl_dspi2>; - pinctrl-names = "default"; - #address-cells = <1>; - #size-cells = <0>; - - gpio-sck = <&gpio2 3 GPIO_ACTIVE_HIGH>; - gpio-mosi = <&gpio2 2 GPIO_ACTIVE_HIGH>; - gpio-miso = <&gpio2 1 GPIO_ACTIVE_HIGH>; - cs-gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>; - num-chipselects = <1>; - - at93c46d@0 { - compatible = "atmel,at93c46d"; - #address-cells = <0>; - #size-cells = <0>; - reg = <0>; - spi-max-frequency = <500000>; - spi-cs-high; - data-size = <16>; - select-gpios = <&gpio2 4 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&dspi0 { - pinctrl-0 = <&pinctrl_dspi0>, <&pinctrl_dspi0_cs_4_5>; - pinctrl-names = "default"; - status = "okay"; -}; - -&dspi1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_dspi1>; - status = "okay"; - - m25p128@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "m25p128", "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <50000000>; - - partition@0 { - label = "m25p128-0"; - reg = <0x0 0x01000000>; - }; - }; - - m25p128@1 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "m25p128", "jedec,spi-nor"; - reg = <1>; - spi-max-frequency = <50000000>; - - partition@0 { - label = "m25p128-1"; - reg = <0x0 0x01000000>; - }; - }; -}; - -&esdhc0 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_esdhc0>; - bus-width = <8>; - status = "okay"; -}; - -&fec0 { - status = "disabled"; -}; - -&i2c0 { - /* Reset Signals */ - gpio5: pca9505@20 { - compatible = "nxp,pca9554"; - reg = <0x20>; - gpio-controller; - #gpio-cells = <2>; - }; - - /* Board Revision */ - gpio6: pca9505@22 { - compatible = "nxp,pca9554"; - reg = <0x22>; - gpio-controller; - #gpio-cells = <2>; - }; -}; - -&i2c1 { - /* Wireless 2 */ - gpio8: pca9554@18 { - compatible = "nxp,pca9557"; - reg = <0x18>; - gpio-controller; - #gpio-cells = <2>; - }; - - /* Wireless 1 */ - gpio7: pca9554@24 { - compatible = "nxp,pca9554"; - reg = <0x24>; - gpio-controller; - #gpio-cells = <2>; - }; - - /* AIB voltage monitor */ - adt7411@4a { - compatible = "adi,adt7411"; - reg = <0x4a>; - }; -}; - -&i2c2 { - /* FIB voltage monitor */ - adt7411@4a { - compatible = "adi,adt7411"; - reg = <0x4a>; - }; - - lm75_swb { - compatible = "national,lm75"; - reg = <0x4e>; - }; - - lm75_swa { - compatible = "national,lm75"; - reg = <0x4f>; - }; - - /* FIB Nameplate */ - at24c08@57 { - compatible = "atmel,24c08"; - reg = <0x57>; - }; - - tca9548@70 { - compatible = "nxp,pca9548"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x70>; - - i2c@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - - sff0: at24c04@50 { - compatible = "atmel,24c04"; - reg = <0x50>; - }; - }; - - i2c@2 { - #address-cells = <1>; - #size-cells = <0>; - reg = <2>; - - sff1: at24c04@50 { - compatible = "atmel,24c04"; - reg = <0x50>; - }; - }; - - i2c@3 { - #address-cells = <1>; - #size-cells = <0>; - reg = <3>; - - sff2: at24c04@50 { - compatible = "atmel,24c04"; - reg = <0x50>; - }; - }; - - i2c@4 { - #address-cells = <1>; - #size-cells = <0>; - reg = <4>; - - sff3: at24c04@50 { - compatible = "atmel,24c04"; - reg = <0x50>; - }; - }; - - i2c@5 { - #address-cells = <1>; - #size-cells = <0>; - reg = <5>; - - sff4: at24c04@50 { - compatible = "atmel,24c04"; - reg = <0x50>; - }; - }; - }; - - - tca9548@71 { - compatible = "nxp,pca9548"; - reg = <0x71>; - #address-cells = <1>; - #size-cells = <0>; - - i2c@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - - sff5: at24c04@50 { - compatible = "atmel,24c04"; - reg = <0x50>; - }; - }; - - i2c@2 { - #address-cells = <1>; - #size-cells = <0>; - reg = <2>; - - sff6: at24c04@50 { - compatible = "atmel,24c04"; - reg = <0x50>; - }; - }; - - i2c@3 { - #address-cells = <1>; - #size-cells = <0>; - reg = <3>; - - sff7: at24c04@50 { - compatible = "atmel,24c04"; - reg = <0x50>; - }; - - }; - - i2c@4 { - #address-cells = <1>; - #size-cells = <0>; - reg = <4>; - - sff8: at24c04@50 { - compatible = "atmel,24c04"; - reg = <0x50>; - }; - }; - - i2c@5 { - #address-cells = <1>; - #size-cells = <0>; - reg = <5>; - - sff9: at24c04@50 { - compatible = "atmel,24c04"; - reg = <0x50>; - }; - }; - }; -}; - -&uart1 { - linux,rs485-enabled-at-boot-time; - pinctrl-0 = <&pinctrl_uart1>, <&pinctrl_uart1_rts>; -}; - -&uart2 { - linux,rs485-enabled-at-boot-time; - pinctrl-0 = <&pinctrl_uart2>, <&pinctrl_uart2_rts>; -}; - -&iomuxc { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpo_public>; - - - pinctrl_gpo_public: gpopubgrp { - fsl,pins = < - VF610_PAD_PTE2__GPIO_107 0x2062 - VF610_PAD_PTE3__GPIO_108 0x2062 - VF610_PAD_PTE4__GPIO_109 0x2062 - VF610_PAD_PTE5__GPIO_110 0x2062 - VF610_PAD_PTE6__GPIO_111 0x2062 - >; - }; - - pinctrl_dspi0_cs_4_5: dspi0grp-cs-4-5 { - fsl,pins = < - VF610_PAD_PTB13__DSPI0_CS4 0x1182 - VF610_PAD_PTB12__DSPI0_CS5 0x1182 - >; - }; - - pinctrl_dspi1: dspi1grp { - fsl,pins = < - VF610_PAD_PTD5__DSPI1_CS0 0x1182 - VF610_PAD_PTD4__DSPI1_CS1 0x1182 - VF610_PAD_PTC6__DSPI1_SIN 0x1181 - VF610_PAD_PTC7__DSPI1_SOUT 0x1182 - VF610_PAD_PTC8__DSPI1_SCK 0x1182 - >; - }; - - pinctrl_esdhc0: esdhc0grp { - fsl,pins = < - VF610_PAD_PTC0__ESDHC0_CLK 0x31ef - VF610_PAD_PTC1__ESDHC0_CMD 0x31ef - VF610_PAD_PTC2__ESDHC0_DAT0 0x31ef - VF610_PAD_PTC3__ESDHC0_DAT1 0x31ef - VF610_PAD_PTC4__ESDHC0_DAT2 0x31ef - VF610_PAD_PTC5__ESDHC0_DAT3 0x31ef - VF610_PAD_PTD23__ESDHC0_DAT4 0x31ef - VF610_PAD_PTD22__ESDHC0_DAT5 0x31ef - VF610_PAD_PTD21__ESDHC0_DAT6 0x31ef - VF610_PAD_PTD20__ESDHC0_DAT7 0x31ef - >; - }; - - pinctrl_i2c3: i2c3grp { - fsl,pins = < - VF610_PAD_PTA30__I2C3_SCL 0x37ff - VF610_PAD_PTA31__I2C3_SDA 0x37ff - >; - }; - - pinctrl_leds_debug: pinctrl-leds-debug { - fsl,pins = < - VF610_PAD_PTB26__GPIO_96 0x31c2 - >; - }; - - pinctrl_uart1_rts: uart1grp-rts { - fsl,pins = < - VF610_PAD_PTB25__UART1_RTS 0x2062 - >; - }; - - pinctrl_uart2_rts: uart2grp-rts { - fsl,pins = < - VF610_PAD_PTD2__UART2_RTS 0x2062 - >; - }; - - pinctrl_mdio_mux: pinctrl-mdio-mux { - fsl,pins = < - VF610_PAD_PTE27__GPIO_132 0x31c2 - VF610_PAD_PTE28__GPIO_133 0x31c2 - VF610_PAD_PTE21__GPIO_126 0x31c2 - VF610_PAD_PTE22__GPIO_127 0x31c2 - >; - }; -}; diff --git a/arch/arm/dts/vf610-zii-scu4-aib.dts b/arch/arm/dts/vf610-zii-scu4-aib.dts new file mode 100644 index 0000000000..abe9e14fd7 --- /dev/null +++ b/arch/arm/dts/vf610-zii-scu4-aib.dts @@ -0,0 +1,21 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// +// Copyright (C) 2016-2018 Zodiac Inflight Innovations + +#include <arm/vf610-zii-scu4-aib.dts> + +#include "vf610-zii-dev.dtsi" + +/ { + aliases { + /* + * NVMEM device corresponding to EEPROM attached to + * the switch shares DT node with it, so we use that + * fact to create a desirable naming + */ + switch0-eeprom = &switch0; + switch1-eeprom = &switch1; + switch2-eeprom = &switch2; + switch3-eeprom = &switch3; + }; +}; diff --git a/arch/arm/dts/vf610-zii-spb4.dts b/arch/arm/dts/vf610-zii-spb4.dts new file mode 100644 index 0000000000..e7d35d0e69 --- /dev/null +++ b/arch/arm/dts/vf610-zii-spb4.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) + +#include "vf610-zii-spb4.dtsi" + +#include "vf610-zii-dev.dtsi" + +/ { + aliases { + /* + * NVMEM device corresponding to EEPROM attached to + * the switch shared DT node with it, so we use that + * fact to create a desirable naming + */ + switch-eeprom = &switch0; + }; +}; diff --git a/arch/arm/dts/vf610-zii-spb4.dtsi b/arch/arm/dts/vf610-zii-spb4.dtsi new file mode 100644 index 0000000000..f618ca45ee --- /dev/null +++ b/arch/arm/dts/vf610-zii-spb4.dtsi @@ -0,0 +1,365 @@ +/* + * This is a copy of DTS file from Linux. Remove it once the same file + * is availible via dts/src/arm + */ + +// SPDX-License-Identifier: (GPL-2.0 OR MIT) + +/* + * Device tree file for ZII's SPB4 board + * + * SPB - Seat Power Box + * + * Copyright (C) 2019 Zodiac Inflight Innovations + */ + +/dts-v1/; +#include <arm/vf610.dtsi> + +/ { + model = "ZII VF610 SPB4 Board"; + compatible = "zii,vf610spb4", "zii,vf610dev", "fsl,vf610"; + + chosen { + stdout-path = &uart0; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x20000000>; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-0 = <&pinctrl_leds_debug>; + pinctrl-names = "default"; + + led-debug { + label = "zii:green:debug1"; + gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + max-brightness = <1>; + }; + }; + + reg_vcc_3v3_mcu: regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_3v3_mcu"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&adc0 { + vref-supply = <®_vcc_3v3_mcu>; + status = "okay"; +}; + +&adc1 { + vref-supply = <®_vcc_3v3_mcu>; + status = "okay"; +}; + +&dspi1 { + bus-num = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dspi1>; + status = "okay"; + + m25p128@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "m25p128", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + }; +}; + +&edma0 { + status = "okay"; +}; + +&edma1 { + status = "okay"; +}; + +&esdhc0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc0>; + bus-width = <8>; + non-removable; + no-1-8-v; + keep-power-in-suspend; + no-sdio; + no-sd; + status = "okay"; +}; + +&esdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1>; + bus-width = <4>; + no-sdio; + status = "okay"; +}; + +&fec1 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + status = "okay"; + + fixed-link { + speed = <100>; + full-duplex; + }; + + mdio1: mdio { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + switch0: switch0@0 { + compatible = "marvell,mv88e6190"; + pinctrl-0 = <&pinctrl_gpio_switch0>; + pinctrl-names = "default"; + reg = <0>; + eeprom-length = <65536>; + reset-gpios = <&gpio3 11 GPIO_ACTIVE_LOW>; + interrupt-parent = <&gpio3>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <2>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "cpu"; + ethernet = <&fec1>; + + fixed-link { + speed = <100>; + full-duplex; + }; + }; + + port@1 { + reg = <1>; + label = "eth_cu_1000_1"; + }; + + port@2 { + reg = <2>; + label = "eth_cu_1000_2"; + }; + + port@3 { + reg = <3>; + label = "eth_cu_1000_3"; + }; + + port@4 { + reg = <4>; + label = "eth_cu_1000_4"; + }; + + port@5 { + reg = <5>; + label = "eth_cu_1000_5"; + }; + + port@6 { + reg = <6>; + label = "eth_cu_1000_6"; + }; + }; + }; + }; +}; + +&i2c0 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c0>; + status = "okay"; + + gpio6: pca9505@22 { + compatible = "nxp,pca9554"; + reg = <0x22>; + gpio-controller; + #gpio-cells = <2>; + }; + + at24c04@50 { + compatible = "atmel,24c04"; + reg = <0x50>; + label = "nameplate"; + }; + + at24c04@52 { + compatible = "atmel,24c04"; + reg = <0x52>; + }; +}; + +&snvsrtc { + status = "disabled"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; + + rave-sp { + compatible = "zii,rave-sp-rdu2"; + current-speed = <1000000>; + #address-cells = <1>; + #size-cells = <1>; + + watchdog { + compatible = "zii,rave-sp-watchdog"; + }; + + eeprom@a3 { + compatible = "zii,rave-sp-eeprom"; + reg = <0xa3 0x4000>; + #address-cells = <1>; + #size-cells = <1>; + zii,eeprom-name = "main-eeprom"; + }; + }; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +&wdoga5 { + status = "disabled"; +}; + +&iomuxc { + pinctrl_dspi1: dspi1grp { + fsl,pins = < + VF610_PAD_PTD5__DSPI1_CS0 0x1182 + VF610_PAD_PTD4__DSPI1_CS1 0x1182 + VF610_PAD_PTC6__DSPI1_SIN 0x1181 + VF610_PAD_PTC7__DSPI1_SOUT 0x1182 + VF610_PAD_PTC8__DSPI1_SCK 0x1182 + >; + }; + + pinctrl_esdhc0: esdhc0grp { + fsl,pins = < + VF610_PAD_PTC0__ESDHC0_CLK 0x31ef + VF610_PAD_PTC1__ESDHC0_CMD 0x31ef + VF610_PAD_PTC2__ESDHC0_DAT0 0x31ef + VF610_PAD_PTC3__ESDHC0_DAT1 0x31ef + VF610_PAD_PTC4__ESDHC0_DAT2 0x31ef + VF610_PAD_PTC5__ESDHC0_DAT3 0x31ef + VF610_PAD_PTD23__ESDHC0_DAT4 0x31ef + VF610_PAD_PTD22__ESDHC0_DAT5 0x31ef + VF610_PAD_PTD21__ESDHC0_DAT6 0x31ef + VF610_PAD_PTD20__ESDHC0_DAT7 0x31ef + >; + }; + + pinctrl_esdhc1: esdhc1grp { + fsl,pins = < + VF610_PAD_PTA24__ESDHC1_CLK 0x31ef + VF610_PAD_PTA25__ESDHC1_CMD 0x31ef + VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef + VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef + VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef + VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef + >; + }; + + pinctrl_fec1: fec1grp { + fsl,pins = < + VF610_PAD_PTA6__RMII_CLKIN 0x30d1 + VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2 + VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3 + VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1 + VF610_PAD_PTC12__ENET_RMII1_RXD1 0x30d1 + VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1 + VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1 + VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2 + VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2 + VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2 + >; + }; + + pinctrl_gpio_switch0: pinctrl-gpio-switch0 { + fsl,pins = < + VF610_PAD_PTE2__GPIO_107 0x31c2 + VF610_PAD_PTB28__GPIO_98 0x219d + >; + }; + + pinctrl_i2c0: i2c0grp { + fsl,pins = < + VF610_PAD_PTB14__I2C0_SCL 0x37ff + VF610_PAD_PTB15__I2C0_SDA 0x37ff + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + VF610_PAD_PTB16__I2C1_SCL 0x37ff + VF610_PAD_PTB17__I2C1_SDA 0x37ff + >; + }; + + pinctrl_leds_debug: pinctrl-leds-debug { + fsl,pins = < + VF610_PAD_PTD3__GPIO_82 0x31c2 + >; + }; + + pinctrl_uart0: uart0grp { + fsl,pins = < + VF610_PAD_PTB10__UART0_TX 0x21a2 + VF610_PAD_PTB11__UART0_RX 0x21a1 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + VF610_PAD_PTB23__UART1_TX 0x21a2 + VF610_PAD_PTB24__UART1_RX 0x21a1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + VF610_PAD_PTD0__UART2_TX 0x21a2 + VF610_PAD_PTD1__UART2_RX 0x21a1 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + VF610_PAD_PTA30__UART3_TX 0x21a2 + VF610_PAD_PTA31__UART3_RX 0x21a1 + >; + }; +}; diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h index 45eeb6e62c..ef9cb98bf0 100644 --- a/arch/arm/include/asm/system.h +++ b/arch/arm/include/asm/system.h @@ -126,6 +126,30 @@ static inline unsigned long get_cntpct(void) return cntpct; } +#else +static inline void set_cntfrq(unsigned long cntfrq) +{ + asm("mcr p15, 0, %0, c14, c0, 0" : : "r" (cntfrq)); +} + +static inline unsigned int get_cntfrq(void) +{ + unsigned int val; + + asm volatile("mrc p15, 0, %0, c14, c0, 0" : "=r" (val)); + + return val; +} + +static inline unsigned long long get_cntpct(void) +{ + unsigned long long cval; + + isb(); + asm volatile("mrrc p15, 0, %Q0, %R0, c14" : "=r" (cval)); + + return cval; +} #endif static inline unsigned int get_cr(void) diff --git a/arch/arm/lib/pbl.lds.S b/arch/arm/lib/pbl.lds.S index 53c9ce0fe6..300671bb51 100644 --- a/arch/arm/lib/pbl.lds.S +++ b/arch/arm/lib/pbl.lds.S @@ -80,12 +80,16 @@ SECTIONS .dynsym : { *(.dynsym) } .__dynsym_end : { *(.__dynsym_end) } + pbl_code_size = . - BASE; + . = ALIGN(4); .__bss_start : { *(.__bss_start) } .bss : { *(.bss*) } .__bss_stop : { *(.__bss_stop) } _end = .; + pbl_memory_size = . - BASE; + . = ALIGN(4); __piggydata_start = .; .piggydata : { @@ -95,6 +99,8 @@ SECTIONS .image_end : { *(.__image_end) } + pbl_image_size = . - BASE; + _barebox_image_size = __image_end - BASE; _barebox_pbl_size = __bss_start - BASE; } diff --git a/arch/arm/lib64/Makefile b/arch/arm/lib64/Makefile index 4c0019fabe..5068431342 100644 --- a/arch/arm/lib64/Makefile +++ b/arch/arm/lib64/Makefile @@ -6,4 +6,4 @@ obj-$(CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS) += memset.o string.o extra-y += barebox.lds obj-pbl-y += runtime-offset.o -pbl-y += div0.o +pbl-y += div0.o pbl.o diff --git a/arch/arm/lib64/pbl.c b/arch/arm/lib64/pbl.c new file mode 100644 index 0000000000..0cef08e4d2 --- /dev/null +++ b/arch/arm/lib64/pbl.c @@ -0,0 +1,17 @@ +#include <asm/system.h> +#include <clock.h> +#include <common.h> + +void udelay(unsigned long us) +{ + unsigned long cntfrq = get_cntfrq(); + unsigned long ticks = (us * cntfrq) / 1000000; + unsigned long start = get_cntpct(); + + while ((long)(start + ticks - get_cntpct()) > 0); +} + +void mdelay(unsigned long ms) +{ + udelay(ms * 1000); +} diff --git a/arch/arm/mach-bcm283x/include/mach/mbox.h b/arch/arm/mach-bcm283x/include/mach/mbox.h index e4f6cb6751..6db961b807 100644 --- a/arch/arm/mach-bcm283x/include/mach/mbox.h +++ b/arch/arm/mach-bcm283x/include/mach/mbox.h @@ -166,6 +166,7 @@ struct bcm2835_mbox_tag_hdr { #define BCM2835_BOARD_REV_ZERO_W 0x0c #define BCM2837B0_BOARD_REV_3B_PLUS 0x0d #define BCM2837B0_BOARD_REV_3A_PLUS 0x0e +#define BCM2837B0_BOARD_REV_CM3_PLUS 0x10 struct bcm2835_mbox_tag_get_board_rev { struct bcm2835_mbox_tag_hdr tag_hdr; diff --git a/arch/arm/mach-clps711x/clock.c b/arch/arm/mach-clps711x/clock.c index 4d6403b92e..2c5137c582 100644 --- a/arch/arm/mach-clps711x/clock.c +++ b/arch/arm/mach-clps711x/clock.c @@ -71,9 +71,9 @@ static __init int clps711x_clk_init(void) clks[CLPS711X_CLK_BUS] = clk_fixed("bus", f_bus); clks[CLPS711X_CLK_UART] = clk_fixed("uart", f_uart); clks[CLPS711X_CLK_TIMERREF] = clk_fixed("timer_ref", f_timer_ref); - clks[CLPS711X_CLK_TIMER1] = clk_divider_table("timer1", "timer_ref", + clks[CLPS711X_CLK_TIMER1] = clk_divider_table("timer1", "timer_ref", 0, IOMEM(SYSCON1), 5, 1, tdiv_tbl, ARRAY_SIZE(tdiv_tbl)); - clks[CLPS711X_CLK_TIMER2] = clk_divider_table("timer2", "timer_ref", + clks[CLPS711X_CLK_TIMER2] = clk_divider_table("timer2", "timer_ref", 0, IOMEM(SYSCON1), 7, 1, tdiv_tbl, ARRAY_SIZE(tdiv_tbl)); clkdev_add_physbase(clks[CLPS711X_CLK_UART], UARTDR1, NULL); diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index f3f3a49339..c4e7500e8f 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -431,16 +431,21 @@ config MACH_VF610_TWR bool "Freescale VF610 Tower Board" select ARCH_VF610 +config MACH_ZII_COMMON + bool + config MACH_ZII_RDU1 bool "ZII i.MX51 RDU1" select ARCH_IMX51 select MACH_FREESCALE_MX51_PDK_POWER select CRC8 + select MACH_ZII_COMMON config MACH_ZII_RDU2 bool "ZII i.MX6Q(+) RDU2" select ARCH_IMX6 select MCI_IMX_ESDHC_PBL + select MACH_ZII_COMMON config MACH_ZII_IMX8MQ_DEV bool "ZII i.MX8MQ based devices" diff --git a/arch/arm/mach-imx/cpu_init.c b/arch/arm/mach-imx/cpu_init.c index 471ef0cfd5..aa6e050e94 100644 --- a/arch/arm/mach-imx/cpu_init.c +++ b/arch/arm/mach-imx/cpu_init.c @@ -16,7 +16,20 @@ #include <asm/barebox-arm-head.h> #include <asm/errata.h> #include <linux/types.h> +#include <linux/bitops.h> #include <mach/generic.h> +#include <mach/imx7-regs.h> +#include <mach/imx8mq-regs.h> +#include <common.h> +#include <io.h> +#include <asm/syscounter.h> +#include <asm/system.h> + +static inline void imx_cpu_timer_init(void __iomem *syscnt) +{ + set_cntfrq(syscnt_get_cntfrq(syscnt)); + syscnt_enable(syscnt); +} #ifdef CONFIG_CPU_32 void imx5_cpu_lowlevel_init(void) @@ -48,10 +61,19 @@ void imx6ul_cpu_lowlevel_init(void) void imx7_cpu_lowlevel_init(void) { arm_cpu_lowlevel_init(); + imx_cpu_timer_init(IOMEM(MX7_SYSCNT_CTRL_BASE_ADDR)); } void vf610_cpu_lowlevel_init(void) { arm_cpu_lowlevel_init(); } +#else +void imx8mq_cpu_lowlevel_init(void) +{ + arm_cpu_lowlevel_init(); + + if (current_el() == 3) + imx_cpu_timer_init(IOMEM(MX8MQ_SYSCNT_CTRL_BASE_ADDR)); +} #endif diff --git a/arch/arm/mach-imx/imx-bbu-external-nand.c b/arch/arm/mach-imx/imx-bbu-external-nand.c index 52622ac4cb..fa43d2e8dc 100644 --- a/arch/arm/mach-imx/imx-bbu-external-nand.c +++ b/arch/arm/mach-imx/imx-bbu-external-nand.c @@ -40,7 +40,7 @@ static int imx_bbu_external_nand_update(struct bbu_handler *handler, struct bbu_ int size_available, size_need; int ret; uint32_t num_bb = 0, bbt = 0; - uint64_t offset = 0; + loff_t offset = 0; int block = 0, len, now, blocksize; void *image = data->image; @@ -147,10 +147,12 @@ static int imx_bbu_external_nand_update(struct bbu_handler *handler, struct bbu_ goto out; if (ret) { - ret = lseek(fd, offset + blocksize, SEEK_SET); - if (ret < 0) - goto out; offset += blocksize; + if (lseek(fd, offset, SEEK_SET) != offset) { + ret = -errno; + goto out; + } + continue; } diff --git a/arch/arm/mach-imx/imx-bbu-internal.c b/arch/arm/mach-imx/imx-bbu-internal.c index 188369fe34..a563b3bc29 100644 --- a/arch/arm/mach-imx/imx-bbu-internal.c +++ b/arch/arm/mach-imx/imx-bbu-internal.c @@ -207,7 +207,7 @@ static int imx_bbu_internal_v2_write_nand_dbbt(struct imx_internal_bbu_handler * int size_available, size_need; int ret; uint32_t *ptr, *num_bb, *bb; - uint64_t offset; + loff_t offset; int block = 0, len, now, blocksize; int dbbt_start_page = 4; int firmware_start_page = 12; @@ -330,10 +330,12 @@ static int imx_bbu_internal_v2_write_nand_dbbt(struct imx_internal_bbu_handler * goto out; if (ret) { - ret = lseek(fd, offset + blocksize, SEEK_SET); - if (ret < 0) - goto out; offset += blocksize; + if (lseek(fd, offset, SEEK_SET) != offset) { + ret = -errno; + goto out; + } + continue; } diff --git a/arch/arm/mach-imx/imx7.c b/arch/arm/mach-imx/imx7.c index ff2a828c7d..d875bf44f1 100644 --- a/arch/arm/mach-imx/imx7.c +++ b/arch/arm/mach-imx/imx7.c @@ -57,39 +57,6 @@ void imx7_init_lowlevel(void) writel(0, aips3 + 0x50); } -#define SC_CNTCR 0x0 -#define SC_CNTSR 0x4 -#define SC_CNTCV1 0x8 -#define SC_CNTCV2 0xc -#define SC_CNTFID0 0x20 -#define SC_CNTFID1 0x24 -#define SC_CNTFID2 0x28 -#define SC_counterid 0xfcc - -#define SC_CNTCR_ENABLE (1 << 0) -#define SC_CNTCR_HDBG (1 << 1) -#define SC_CNTCR_FREQ0 (1 << 8) -#define SC_CNTCR_FREQ1 (1 << 9) - -static int imx7_timer_init(void) -{ - void __iomem *sctr = IOMEM(MX7_SYSCNT_CTRL_BASE_ADDR); - unsigned long val, freq; - - freq = 8000000; - asm("mcr p15, 0, %0, c14, c0, 0" : : "r" (freq)); - - writel(freq, sctr + SC_CNTFID0); - - /* Enable system counter */ - val = readl(sctr + SC_CNTCR); - val &= ~(SC_CNTCR_FREQ0 | SC_CNTCR_FREQ1); - val |= SC_CNTCR_FREQ0 | SC_CNTCR_ENABLE | SC_CNTCR_HDBG; - writel(val, sctr + SC_CNTCR); - - return 0; -} - #define CSU_NUM_REGS 64 #define CSU_INIT_SEC_LEVEL0 0x00FF00FF @@ -186,8 +153,6 @@ int imx7_init(void) imx7_init_csu(); - imx7_timer_init(); - imx7_boot_save_loc(); psci_set_ops(&imx7_psci_ops); diff --git a/arch/arm/mach-imx/imx8mq.c b/arch/arm/mach-imx/imx8mq.c index 3f6b433a57..089344528d 100644 --- a/arch/arm/mach-imx/imx8mq.c +++ b/arch/arm/mach-imx/imx8mq.c @@ -27,28 +27,6 @@ #define FSL_SIP_BUILDINFO 0xC2000003 #define FSL_SIP_BUILDINFO_GET_COMMITHASH 0x00 -static int imx8mq_init_syscnt_frequency(void) -{ - if (!cpu_is_mx8mq()) - return 0; - - if (current_el() == 3) { - void __iomem *syscnt = IOMEM(MX8MQ_SYSCNT_CTRL_BASE_ADDR); - /* - * Update with accurate clock frequency - */ - set_cntfrq(syscnt_get_cntfrq(syscnt)); - syscnt_enable(syscnt); - } - - return 0; -} -/* - * This call needs to happen before timer driver gets probed and - * requests its update frequency via cntfrq_el0 - */ -core_initcall(imx8mq_init_syscnt_frequency); - int imx8mq_init(void) { void __iomem *anatop = IOMEM(MX8MQ_ANATOP_BASE_ADDR); diff --git a/arch/arm/mach-imx/include/mach/generic.h b/arch/arm/mach-imx/include/mach/generic.h index be58da4da2..ac066e3f17 100644 --- a/arch/arm/mach-imx/include/mach/generic.h +++ b/arch/arm/mach-imx/include/mach/generic.h @@ -58,6 +58,7 @@ void imx6_cpu_lowlevel_init(void); void imx6ul_cpu_lowlevel_init(void); void imx7_cpu_lowlevel_init(void); void vf610_cpu_lowlevel_init(void); +void imx8mq_cpu_lowlevel_init(void); /* There's a off-by-one betweem the gpio bank number and the gpiochip */ /* range e.g. GPIO_1_5 is gpio 5 under linux */ diff --git a/arch/arm/mach-layerscape/Kconfig b/arch/arm/mach-layerscape/Kconfig new file mode 100644 index 0000000000..3a44f3fea1 --- /dev/null +++ b/arch/arm/mach-layerscape/Kconfig @@ -0,0 +1,21 @@ +if ARCH_LAYERSCAPE + +config ARCH_LS1046 + select CPU_V8 + select SYS_SUPPORTS_64BIT_KERNEL + bool + +config MACH_LS1046ARDB + bool "QorIQ LS1046A Reference Design Board" + select ARCH_LS1046 + select DDR_SPD + select MCI_IMX_ESDHC_PBL + select I2C_IMX_EARLY + select DDR_FSL + select DDR_FSL_DDR4 + +config MACH_TQMLS1046A + bool "TQ TQMLS1046A Board" + select ARCH_LS1046 + +endif diff --git a/arch/arm/mach-layerscape/Makefile b/arch/arm/mach-layerscape/Makefile new file mode 100644 index 0000000000..269839254b --- /dev/null +++ b/arch/arm/mach-layerscape/Makefile @@ -0,0 +1,4 @@ +obj- := __dummy__.o +lwl-y += lowlevel.o errata.o +lwl-$(CONFIG_ARCH_LS1046) += lowlevel-ls1046a.o +obj-y += icid.o diff --git a/arch/arm/mach-layerscape/errata.c b/arch/arm/mach-layerscape/errata.c new file mode 100644 index 0000000000..4f4b759ddb --- /dev/null +++ b/arch/arm/mach-layerscape/errata.c @@ -0,0 +1,195 @@ +// SPDX-License-Identifier: GPL-2.0+ +#include <common.h> +#include <io.h> +#include <soc/fsl/immap_lsch2.h> +#include <soc/fsl/fsl_ddr_sdram.h> +#include <asm/system.h> +#include <mach/errata.h> +#include <mach/lowlevel.h> + +#define scfg_clrsetbits32(addr, clear, set) clrsetbits_be32(addr, clear, set) +#define scfg_clrbits32(addr, clear) clrbits_be32(addr, clear) + +static inline void set_usb_pcstxswingfull(u32 __iomem *scfg, u32 offset) +{ + scfg_clrsetbits32(scfg + offset / 4, + 0x7f << 9, + SCFG_USB_PCSTXSWINGFULL << 9); +} + +static void erratum_a008997_ls1046a(void) +{ + u32 __iomem *scfg = (u32 __iomem *)LSCH2_SCFG_ADDR; + + set_usb_pcstxswingfull(scfg, SCFG_USB3PRM2CR_USB1); + set_usb_pcstxswingfull(scfg, SCFG_USB3PRM2CR_USB2); + set_usb_pcstxswingfull(scfg, SCFG_USB3PRM2CR_USB3); +} + +#define PROGRAM_USB_PHY_RX_OVRD_IN_HI(phy) \ + out_be16((phy) + SCFG_USB_PHY_RX_OVRD_IN_HI, USB_PHY_RX_EQ_VAL_1); \ + out_be16((phy) + SCFG_USB_PHY_RX_OVRD_IN_HI, USB_PHY_RX_EQ_VAL_2); \ + out_be16((phy) + SCFG_USB_PHY_RX_OVRD_IN_HI, USB_PHY_RX_EQ_VAL_3); \ + out_be16((phy) + SCFG_USB_PHY_RX_OVRD_IN_HI, USB_PHY_RX_EQ_VAL_4) + +static void erratum_a009007_ls1046a(void) +{ + void __iomem *usb_phy = IOMEM(SCFG_USB_PHY1); + + PROGRAM_USB_PHY_RX_OVRD_IN_HI(usb_phy); + usb_phy = (void __iomem *)SCFG_USB_PHY2; + PROGRAM_USB_PHY_RX_OVRD_IN_HI(usb_phy); + + usb_phy = (void __iomem *)SCFG_USB_PHY3; + PROGRAM_USB_PHY_RX_OVRD_IN_HI(usb_phy); +} + +static inline void set_usb_txvreftune(u32 __iomem *scfg, u32 offset) +{ + scfg_clrsetbits32(scfg + offset / 4, 0xf << 6, SCFG_USB_TXVREFTUNE << 6); +} + +static void erratum_a009008_ls1046a(void) +{ + u32 __iomem *scfg = IOMEM(LSCH2_SCFG_ADDR); + + set_usb_txvreftune(scfg, SCFG_USB3PRM1CR_USB1); + set_usb_txvreftune(scfg, SCFG_USB3PRM1CR_USB2); + set_usb_txvreftune(scfg, SCFG_USB3PRM1CR_USB3); +} + +static inline void set_usb_sqrxtune(u32 __iomem *scfg, u32 offset) +{ + scfg_clrbits32(scfg + offset / 4, SCFG_USB_SQRXTUNE_MASK << 23); +} + +static void erratum_a009798_ls1046a(void) +{ + u32 __iomem *scfg = IOMEM(LSCH2_SCFG_ADDR); + + set_usb_sqrxtune(scfg, SCFG_USB3PRM1CR_USB1); + set_usb_sqrxtune(scfg, SCFG_USB3PRM1CR_USB2); + set_usb_sqrxtune(scfg, SCFG_USB3PRM1CR_USB3); +} + +static void erratum_a008850_early(void) +{ + /* part 1 of 2 */ + struct ccsr_cci400 __iomem *cci = IOMEM(LSCH2_CCI400_ADDR); + struct ccsr_ddr __iomem *ddr = IOMEM(LSCH2_DDR_ADDR); + + /* Skip if running at lower exception level */ + if (current_el() < 3) + return; + + /* disables propagation of barrier transactions to DDRC from CCI400 */ + out_le32(&cci->ctrl_ord, CCI400_CTRLORD_TERM_BARRIER); + + /* disable the re-ordering in DDRC */ + ddr_out32(&ddr->eor, DDR_EOR_RD_REOD_DIS | DDR_EOR_WD_REOD_DIS); +} + +/* erratum_a009942_check_cpo */ + +void ls1046a_errata(void) +{ + erratum_a008850_early(); + erratum_a009008_ls1046a(); + erratum_a009798_ls1046a(); + erratum_a008997_ls1046a(); + erratum_a009007_ls1046a(); +} + +static void erratum_a008850_post(void) +{ + /* part 2 of 2 */ + struct ccsr_cci400 __iomem *cci = IOMEM(LSCH2_CCI400_ADDR); + struct ccsr_ddr __iomem *ddr = IOMEM(LSCH2_DDR_ADDR); + u32 tmp; + + /* Skip if running at lower exception level */ + if (current_el() < 3) + return; + + /* enable propagation of barrier transactions to DDRC from CCI400 */ + out_le32(&cci->ctrl_ord, CCI400_CTRLORD_EN_BARRIER); + + /* enable the re-ordering in DDRC */ + tmp = ddr_in32(&ddr->eor); + tmp &= ~(DDR_EOR_RD_REOD_DIS | DDR_EOR_WD_REOD_DIS); + ddr_out32(&ddr->eor, tmp); +} + +/* + * This additional workaround of A009942 checks the condition to determine if + * the CPO value set by the existing A009942 workaround needs to be updated. + * If need, print a warning to prompt user reconfigure DDR debug_29[24:31] with + * expected optimal value, the optimal value is highly board dependent. + */ +static void erratum_a009942_check_cpo(void) +{ + struct ccsr_ddr __iomem *ddr = + (struct ccsr_ddr __iomem *)(LSCH2_DDR_ADDR); + u32 cpo, cpo_e, cpo_o, cpo_target, cpo_optimal; + u32 cpo_min = ddr_in32(&ddr->debug[9]) >> 24; + u32 cpo_max = cpo_min; + u32 sdram_cfg, i, tmp, lanes, ddr_type; + bool update_cpo = false, has_ecc = false; + + sdram_cfg = ddr_in32(&ddr->sdram_cfg); + if (sdram_cfg & SDRAM_CFG_32_BE) + lanes = 4; + else if (sdram_cfg & SDRAM_CFG_16_BE) + lanes = 2; + else + lanes = 8; + + if (sdram_cfg & SDRAM_CFG_ECC_EN) + has_ecc = true; + + /* determine the maximum and minimum CPO values */ + for (i = 9; i < 9 + lanes / 2; i++) { + cpo = ddr_in32(&ddr->debug[i]); + cpo_e = cpo >> 24; + cpo_o = (cpo >> 8) & 0xff; + tmp = min(cpo_e, cpo_o); + if (tmp < cpo_min) + cpo_min = tmp; + tmp = max(cpo_e, cpo_o); + if (tmp > cpo_max) + cpo_max = tmp; + } + + if (has_ecc) { + cpo = ddr_in32(&ddr->debug[13]); + cpo = cpo >> 24; + if (cpo < cpo_min) + cpo_min = cpo; + if (cpo > cpo_max) + cpo_max = cpo; + } + + cpo_target = ddr_in32(&ddr->debug[28]) & 0xff; + cpo_optimal = ((cpo_max + cpo_min) >> 1) + 0x27; + debug("cpo_optimal = 0x%x, cpo_target = 0x%x\n", cpo_optimal, + cpo_target); + debug("cpo_max = 0x%x, cpo_min = 0x%x\n", cpo_max, cpo_min); + + ddr_type = (sdram_cfg & SDRAM_CFG_SDRAM_TYPE_MASK) >> + SDRAM_CFG_SDRAM_TYPE_SHIFT; + if (ddr_type == SDRAM_TYPE_DDR4) + update_cpo = (cpo_min + 0x3b) < cpo_target ? true : false; + else if (ddr_type == SDRAM_TYPE_DDR3) + update_cpo = (cpo_min + 0x3f) < cpo_target ? true : false; + + if (update_cpo) { + printf("WARN: pls set popts->cpo_sample = 0x%x ", cpo_optimal); + printf("in <board>/ddr.c to optimize cpo\n"); + } +} + +void ls1046a_errata_post_ddr(void) +{ + erratum_a008850_post(); + erratum_a009942_check_cpo(); +} diff --git a/arch/arm/mach-layerscape/icid.c b/arch/arm/mach-layerscape/icid.c new file mode 100644 index 0000000000..2326d7e67a --- /dev/null +++ b/arch/arm/mach-layerscape/icid.c @@ -0,0 +1,243 @@ +#include <common.h> +#include <io.h> +#include <init.h> +#include <soc/fsl/immap_lsch2.h> +#include <soc/fsl/fsl_qbman.h> +#include <soc/fsl/fsl_fman.h> + +/* + * Stream IDs on Chassis-2 (for example ls1043a, ls1046a, ls1012) devices + * are not hardwired and are programmed by sw. There are a limited number + * of stream IDs available, and the partitioning of them is scenario + * dependent. This header defines the partitioning between legacy, PCI, + * and DPAA1 devices. + * + * This partitioning can be customized in this file depending + * on the specific hardware config: + * + * -non-PCI legacy, platform devices (USB, SDHC, SATA, DMA, QE etc) + * -all legacy devices get a unique stream ID assigned and programmed in + * their AMQR registers by u-boot + * + * -PCIe + * -there is a range of stream IDs set aside for PCI in this + * file. U-boot will scan the PCI bus and for each device discovered: + * -allocate a streamID + * -set a PEXn LUT table entry mapping 'requester ID' to 'stream ID' + * -set a msi-map entry in the PEXn controller node in the + * device tree (see Documentation/devicetree/bindings/pci/pci-msi.txt + * for more info on the msi-map definition) + * -set a iommu-map entry in the PEXn controller node in the + * device tree (see Documentation/devicetree/bindings/pci/pci-iommu.txt + * for more info on the iommu-map definition) + * + * -DPAA1 + * - Stream ids for DPAA1 use are reserved for future usecase. + * + */ + + +#define FSL_INVALID_STREAM_ID 0 + +/* legacy devices */ +#define FSL_USB1_STREAM_ID 1 +#define FSL_USB2_STREAM_ID 2 +#define FSL_USB3_STREAM_ID 3 +#define FSL_SDHC_STREAM_ID 4 +#define FSL_SATA_STREAM_ID 5 +#define FSL_QE_STREAM_ID 6 +#define FSL_QDMA_STREAM_ID 7 +#define FSL_EDMA_STREAM_ID 8 +#define FSL_ETR_STREAM_ID 9 +#define FSL_DEBUG_STREAM_ID 10 + +/* PCI - programmed in PEXn_LUT */ +#define FSL_PEX_STREAM_ID_START 11 +#define FSL_PEX_STREAM_ID_END 26 + +/* DPAA1 - Stream-ID that can be programmed in DPAA1 h/w */ +#define FSL_DPAA1_STREAM_ID_START 27 +#define FSL_DPAA1_STREAM_ID_END 63 + +struct icid_id_table { + const char *compat; + u32 id; + u32 reg; + phys_addr_t compat_addr; + phys_addr_t reg_addr; +}; + +struct fman_icid_id_table { + u32 port_id; + u32 icid; +}; + +#define SET_ICID_ENTRY(name, idA, regA, addr, compataddr) \ + { \ + .compat = name, \ + .id = idA, \ + .reg = regA, \ + .compat_addr = compataddr, \ + .reg_addr = addr, \ + } + +#define SET_SCFG_ICID(compat, streamid, name, compataddr) \ + SET_ICID_ENTRY(compat, streamid, (((streamid) << 24) | (1 << 23)), \ + offsetof(struct ccsr_scfg, name) + LSCH2_SCFG_ADDR, \ + compataddr) + +#define SET_USB_ICID(usb_num, compat, streamid) \ + SET_SCFG_ICID(compat, streamid, usb##usb_num##_icid,\ + LSCH2_XHCI_USB##usb_num##_ADDR) + +#define SET_SATA_ICID(compat, streamid) \ + SET_SCFG_ICID(compat, streamid, sata_icid,\ + LSCH2_HCI_BASE_ADDR) + +#define SET_SDHC_ICID(streamid) \ + SET_SCFG_ICID("fsl,esdhc", streamid, sdhc_icid,\ + LSCH2_ESDHC_ADDR) + +#define QMAN_CQSIDR_REG 0x20a80 + +#define SET_QDMA_ICID(compat, streamid) \ + SET_ICID_ENTRY(compat, streamid, (1 << 31) | (streamid), \ + LSCH2_QDMA_BASE_ADDR + QMAN_CQSIDR_REG, \ + LSCH2_QDMA_BASE_ADDR), \ + SET_ICID_ENTRY(NULL, streamid, (1 << 31) | (streamid), \ + LSCH2_QDMA_BASE_ADDR + QMAN_CQSIDR_REG + 4, \ + LSCH2_QDMA_BASE_ADDR) + +#define SET_EDMA_ICID(streamid) \ + SET_SCFG_ICID("fsl,vf610-edma", streamid, edma_icid,\ + LSCH2_EDMA_BASE_ADDR) + +#define SET_ETR_ICID(streamid) \ + SET_SCFG_ICID(NULL, streamid, etr_icid, 0) + +#define SET_DEBUG_ICID(streamid) \ + SET_SCFG_ICID(NULL, streamid, debug_icid, 0) + +#define SET_QE_ICID(streamid) \ + SET_SCFG_ICID("fsl,qe", streamid, qe_icid,\ + LSCH2_QE_BASE_ADDR) + +#define SET_QMAN_ICID(streamid) \ + SET_ICID_ENTRY("fsl,qman", streamid, streamid, \ + offsetof(struct ccsr_qman, liodnr) + \ + LSCH2_QMAN_ADDR, \ + LSCH2_QMAN_ADDR) + +#define SET_BMAN_ICID(streamid) \ + SET_ICID_ENTRY("fsl,bman", streamid, streamid, \ + offsetof(struct ccsr_bman, liodnr) + \ + LSCH2_BMAN_ADDR, \ + LSCH2_BMAN_ADDR) + +#define SET_FMAN_ICID_ENTRY(_port_id, streamid) \ + { .port_id = (_port_id), .icid = (streamid) } + +#define SET_SEC_QI_ICID(streamid) \ + SET_ICID_ENTRY("fsl,sec-v4.0", streamid, \ + 0, offsetof(ccsr_sec_t, qilcr_ls) + \ + LSCH2_SEC_ADDR, \ + LSCH2_SEC_ADDR) + +#define SET_SEC_JR_ICID_ENTRY(jr_num, streamid) \ + SET_ICID_ENTRY( \ + (CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT && \ + (FSL_SEC_JR##jr_num##_OFFSET == \ + SEC_JR3_OFFSET + CONFIG_SYS_FSL_SEC_OFFSET) \ + ? NULL \ + : "fsl,sec-v4.0-job-ring"), \ + streamid, \ + (((streamid) << 16) | (streamid)), \ + offsetof(ccsr_sec_t, jrliodnr[jr_num].ls) + \ + LSCH2_SEC_ADDR, \ + FSL_SEC_JR##jr_num##_BASE_ADDR) + +#define SET_SEC_DECO_ICID_ENTRY(deco_num, streamid) \ + SET_ICID_ENTRY(NULL, streamid, (((streamid) << 16) | (streamid)), \ + offsetof(ccsr_sec_t, decoliodnr[deco_num].ls) + \ + LSCH2_SEC_ADDR, 0) + +#define SET_SEC_RTIC_ICID_ENTRY(rtic_num, streamid) \ + SET_ICID_ENTRY(NULL, streamid, (((streamid) << 16) | (streamid)), \ + offsetof(ccsr_sec_t, rticliodnr[rtic_num].ls) + \ + LSCH2_SEC_ADDR, 0) + +static struct icid_id_table icid_tbl_ls1046a[] = { + SET_QMAN_ICID(FSL_DPAA1_STREAM_ID_START), + SET_BMAN_ICID(FSL_DPAA1_STREAM_ID_START + 1), + + SET_SDHC_ICID(FSL_SDHC_STREAM_ID), + + SET_USB_ICID(1, "snps,dwc3", FSL_USB1_STREAM_ID), + SET_USB_ICID(2, "snps,dwc3", FSL_USB2_STREAM_ID), + SET_USB_ICID(3, "snps,dwc3", FSL_USB3_STREAM_ID), + + SET_SATA_ICID("fsl,ls1046a-ahci", FSL_SATA_STREAM_ID), + SET_QDMA_ICID("fsl,ls1046a-qdma", FSL_QDMA_STREAM_ID), + SET_EDMA_ICID(FSL_EDMA_STREAM_ID), + SET_ETR_ICID(FSL_ETR_STREAM_ID), + SET_DEBUG_ICID(FSL_DEBUG_STREAM_ID), +}; + +static struct fman_icid_id_table fman_icid_tbl_ls1046a[] = { + /* port id, icid */ + SET_FMAN_ICID_ENTRY(0x02, FSL_DPAA1_STREAM_ID_END), + SET_FMAN_ICID_ENTRY(0x03, FSL_DPAA1_STREAM_ID_END), + SET_FMAN_ICID_ENTRY(0x04, FSL_DPAA1_STREAM_ID_END), + SET_FMAN_ICID_ENTRY(0x05, FSL_DPAA1_STREAM_ID_END), + SET_FMAN_ICID_ENTRY(0x06, FSL_DPAA1_STREAM_ID_END), + SET_FMAN_ICID_ENTRY(0x07, FSL_DPAA1_STREAM_ID_END), + SET_FMAN_ICID_ENTRY(0x08, FSL_DPAA1_STREAM_ID_END), + SET_FMAN_ICID_ENTRY(0x09, FSL_DPAA1_STREAM_ID_END), + SET_FMAN_ICID_ENTRY(0x0a, FSL_DPAA1_STREAM_ID_END), + SET_FMAN_ICID_ENTRY(0x0b, FSL_DPAA1_STREAM_ID_END), + SET_FMAN_ICID_ENTRY(0x0c, FSL_DPAA1_STREAM_ID_END), + SET_FMAN_ICID_ENTRY(0x0d, FSL_DPAA1_STREAM_ID_END), + SET_FMAN_ICID_ENTRY(0x28, FSL_DPAA1_STREAM_ID_END), + SET_FMAN_ICID_ENTRY(0x29, FSL_DPAA1_STREAM_ID_END), + SET_FMAN_ICID_ENTRY(0x2a, FSL_DPAA1_STREAM_ID_END), + SET_FMAN_ICID_ENTRY(0x2b, FSL_DPAA1_STREAM_ID_END), + SET_FMAN_ICID_ENTRY(0x2c, FSL_DPAA1_STREAM_ID_END), + SET_FMAN_ICID_ENTRY(0x2d, FSL_DPAA1_STREAM_ID_END), + SET_FMAN_ICID_ENTRY(0x10, FSL_DPAA1_STREAM_ID_END), + SET_FMAN_ICID_ENTRY(0x11, FSL_DPAA1_STREAM_ID_END), + SET_FMAN_ICID_ENTRY(0x30, FSL_DPAA1_STREAM_ID_END), + SET_FMAN_ICID_ENTRY(0x31, FSL_DPAA1_STREAM_ID_END), +}; + +static void set_icid(struct icid_id_table *tbl, int size) +{ + int i; + + for (i = 0; i < size; i++) + out_be32((u32 *)(tbl[i].reg_addr), tbl[i].reg); +} + +static void set_fman_icids(struct fman_icid_id_table *tbl, int size) +{ + int i; + struct ccsr_fman *fm = (void *)LSCH2_FM1_ADDR; + + for (i = 0; i < size; i++) { + out_be32(&fm->fm_bmi_common.fmbm_ppid[tbl[i].port_id - 1], + tbl[i].icid); + } +} + +static int set_icids(void) +{ + if (!of_machine_is_compatible("fsl,ls1046a")) + return 0; + + /* setup general icid offsets */ + set_icid(icid_tbl_ls1046a, ARRAY_SIZE(icid_tbl_ls1046a)); + + set_fman_icids(fman_icid_tbl_ls1046a, ARRAY_SIZE(fman_icid_tbl_ls1046a)); + + return 0; +} +postcore_initcall(set_icids);
\ No newline at end of file diff --git a/arch/arm/mach-layerscape/include/mach/debug_ll.h b/arch/arm/mach-layerscape/include/mach/debug_ll.h new file mode 100644 index 0000000000..2658a4a7c9 --- /dev/null +++ b/arch/arm/mach-layerscape/include/mach/debug_ll.h @@ -0,0 +1,34 @@ +#ifndef __INCLUDE_ARCH_DEBUG_LL_H__ +#define __INCLUDE_ARCH_DEBUG_LL_H__ + +#include <io.h> +#include <soc/fsl/immap_lsch2.h> + +#define __LS_UART_BASE(num) LSCH2_NS16550_COM##num +#define LS_UART_BASE(num) __LS_UART_BASE(num) + +static inline uint8_t debug_ll_read_reg(int reg) +{ + void __iomem *base = IOMEM(LS_UART_BASE(CONFIG_DEBUG_LAYERSCAPE_UART_PORT)); + + return readb(base + reg); +} + +static inline void debug_ll_write_reg(int reg, uint8_t val) +{ + void __iomem *base = IOMEM(LS_UART_BASE(CONFIG_DEBUG_LAYERSCAPE_UART_PORT)); + + writeb(val, base + reg); +} + +#include <debug_ll/ns16550.h> + +static inline void debug_ll_init(void) +{ + uint16_t divisor; + + divisor = debug_ll_ns16550_calc_divisor(300000000); + debug_ll_ns16550_init(divisor); +} + +#endif /* __INCLUDE_ARCH_DEBUG_LL_H__ */ diff --git a/arch/arm/mach-layerscape/include/mach/errata.h b/arch/arm/mach-layerscape/include/mach/errata.h new file mode 100644 index 0000000000..bdefa22172 --- /dev/null +++ b/arch/arm/mach-layerscape/include/mach/errata.h @@ -0,0 +1,7 @@ +#ifndef __MACH_ERRATA_H +#define __MACH_ERRATA_H + +void ls1046a_errata(void); +void ls1046a_errata_post_ddr(void); + +#endif /* __MACH_ERRATA_H */ diff --git a/arch/arm/mach-layerscape/include/mach/layerscape.h b/arch/arm/mach-layerscape/include/mach/layerscape.h new file mode 100644 index 0000000000..55e0b7bc96 --- /dev/null +++ b/arch/arm/mach-layerscape/include/mach/layerscape.h @@ -0,0 +1,7 @@ +#ifndef __MACH_LAYERSCAPE_H +#define __MACH_LAYERSCAPE_H + +#define LS1046A_DDR_SDRAM_BASE 0x80000000 +#define LS1046A_DDR_FREQ 2100000000 + +#endif /* __MACH_LAYERSCAPE_H */ diff --git a/arch/arm/mach-layerscape/include/mach/lowlevel.h b/arch/arm/mach-layerscape/include/mach/lowlevel.h new file mode 100644 index 0000000000..0f5f0f3aad --- /dev/null +++ b/arch/arm/mach-layerscape/include/mach/lowlevel.h @@ -0,0 +1,7 @@ +#ifndef __MACH_LOWLEVEL_H +#define __MACH_LOWLEVEL_H + +void ls1046a_init_lowlevel(void); +void ls1046a_init_l2_latency(void); + +#endif /* __MACH_LOWLEVEL_H */ diff --git a/arch/arm/mach-layerscape/include/mach/xload.h b/arch/arm/mach-layerscape/include/mach/xload.h new file mode 100644 index 0000000000..fedd36e020 --- /dev/null +++ b/arch/arm/mach-layerscape/include/mach/xload.h @@ -0,0 +1,6 @@ +#ifndef __MACH_XLOAD_H +#define __MACH_XLOAD_H + +int ls1046a_esdhc_start_image(unsigned long r0, unsigned long r1, unsigned long r2); + +#endif /* __MACH_XLOAD_H */ diff --git a/arch/arm/mach-layerscape/lowlevel-ls1046a.c b/arch/arm/mach-layerscape/lowlevel-ls1046a.c new file mode 100644 index 0000000000..32f825ec25 --- /dev/null +++ b/arch/arm/mach-layerscape/lowlevel-ls1046a.c @@ -0,0 +1,246 @@ +// SPDX-License-Identifier: GPL-2.0+ +#include <common.h> +#include <io.h> +#include <asm/syscounter.h> +#include <asm/system.h> +#include <mach/errata.h> +#include <mach/lowlevel.h> +#include <soc/fsl/immap_lsch2.h> +#include <soc/fsl/fsl_immap.h> + +enum csu_cslx_access { + CSU_NS_SUP_R = 0x08, + CSU_NS_SUP_W = 0x80, + CSU_NS_SUP_RW = 0x88, + CSU_NS_USER_R = 0x04, + CSU_NS_USER_W = 0x40, + CSU_NS_USER_RW = 0x44, + CSU_S_SUP_R = 0x02, + CSU_S_SUP_W = 0x20, + CSU_S_SUP_RW = 0x22, + CSU_S_USER_R = 0x01, + CSU_S_USER_W = 0x10, + CSU_S_USER_RW = 0x11, + CSU_ALL_RW = 0xff, +}; + +struct csu_ns_dev { + unsigned long ind; + uint32_t val; +}; + +enum csu_cslx_ind { + CSU_CSLX_PCIE2_IO = 0, + CSU_CSLX_PCIE1_IO, + CSU_CSLX_MG2TPR_IP, + CSU_CSLX_IFC_MEM, + CSU_CSLX_OCRAM, + CSU_CSLX_GIC, + CSU_CSLX_PCIE1, + CSU_CSLX_OCRAM2, + CSU_CSLX_QSPI_MEM, + CSU_CSLX_PCIE2, + CSU_CSLX_SATA, + CSU_CSLX_USB1, + CSU_CSLX_QM_BM_SWPORTAL, + CSU_CSLX_PCIE3 = 16, + CSU_CSLX_PCIE3_IO, + CSU_CSLX_USB3 = 20, + CSU_CSLX_USB2, + CSU_CSLX_PFE = 23, + CSU_CSLX_SERDES = 32, + CSU_CSLX_QDMA, + CSU_CSLX_LPUART2, + CSU_CSLX_LPUART1, + CSU_CSLX_LPUART4, + CSU_CSLX_LPUART3, + CSU_CSLX_LPUART6, + CSU_CSLX_LPUART5, + CSU_CSLX_DSPI1 = 41, + CSU_CSLX_QSPI, + CSU_CSLX_ESDHC, + CSU_CSLX_IFC = 45, + CSU_CSLX_I2C1, + CSU_CSLX_USB_2, + CSU_CSLX_I2C3 = 48, + CSU_CSLX_I2C2, + CSU_CSLX_DUART2 = 50, + CSU_CSLX_DUART1, + CSU_CSLX_WDT2, + CSU_CSLX_WDT1, + CSU_CSLX_EDMA, + CSU_CSLX_SYS_CNT, + CSU_CSLX_DMA_MUX2, + CSU_CSLX_DMA_MUX1, + CSU_CSLX_DDR, + CSU_CSLX_QUICC, + CSU_CSLX_DCFG_CCU_RCPM = 60, + CSU_CSLX_SECURE_BOOTROM, + CSU_CSLX_SFP, + CSU_CSLX_TMU, + CSU_CSLX_SECURE_MONITOR, + CSU_CSLX_SCFG, + CSU_CSLX_FM = 66, + CSU_CSLX_SEC5_5, + CSU_CSLX_BM, + CSU_CSLX_QM, + CSU_CSLX_GPIO2 = 70, + CSU_CSLX_GPIO1, + CSU_CSLX_GPIO4, + CSU_CSLX_GPIO3, + CSU_CSLX_PLATFORM_CONT, + CSU_CSLX_CSU, + CSU_CSLX_IIC4 = 77, + CSU_CSLX_WDT4, + CSU_CSLX_WDT3, + CSU_CSLX_ESDHC2 = 80, + CSU_CSLX_WDT5 = 81, + CSU_CSLX_SAI2, + CSU_CSLX_SAI1, + CSU_CSLX_SAI4, + CSU_CSLX_SAI3, + CSU_CSLX_FTM2 = 86, + CSU_CSLX_FTM1, + CSU_CSLX_FTM4, + CSU_CSLX_FTM3, + CSU_CSLX_FTM6 = 90, + CSU_CSLX_FTM5, + CSU_CSLX_FTM8, + CSU_CSLX_FTM7, + CSU_CSLX_DSCR = 121, +}; + +static struct csu_ns_dev ns_dev[] = { + {CSU_CSLX_PCIE2_IO, CSU_ALL_RW}, + {CSU_CSLX_PCIE1_IO, CSU_ALL_RW}, + {CSU_CSLX_MG2TPR_IP, CSU_ALL_RW}, + {CSU_CSLX_IFC_MEM, CSU_ALL_RW}, + {CSU_CSLX_OCRAM, CSU_ALL_RW}, + {CSU_CSLX_GIC, CSU_ALL_RW}, + {CSU_CSLX_PCIE1, CSU_ALL_RW}, + {CSU_CSLX_OCRAM2, CSU_ALL_RW}, + {CSU_CSLX_QSPI_MEM, CSU_ALL_RW}, + {CSU_CSLX_PCIE2, CSU_ALL_RW}, + {CSU_CSLX_SATA, CSU_ALL_RW}, + {CSU_CSLX_USB1, CSU_ALL_RW}, + {CSU_CSLX_QM_BM_SWPORTAL, CSU_ALL_RW}, + {CSU_CSLX_PCIE3, CSU_ALL_RW}, + {CSU_CSLX_PCIE3_IO, CSU_ALL_RW}, + {CSU_CSLX_USB3, CSU_ALL_RW}, + {CSU_CSLX_USB2, CSU_ALL_RW}, + {CSU_CSLX_PFE, CSU_ALL_RW}, + {CSU_CSLX_SERDES, CSU_ALL_RW}, + {CSU_CSLX_QDMA, CSU_ALL_RW}, + {CSU_CSLX_LPUART2, CSU_ALL_RW}, + {CSU_CSLX_LPUART1, CSU_ALL_RW}, + {CSU_CSLX_LPUART4, CSU_ALL_RW}, + {CSU_CSLX_LPUART3, CSU_ALL_RW}, + {CSU_CSLX_LPUART6, CSU_ALL_RW}, + {CSU_CSLX_LPUART5, CSU_ALL_RW}, + {CSU_CSLX_DSPI1, CSU_ALL_RW}, + {CSU_CSLX_QSPI, CSU_ALL_RW}, + {CSU_CSLX_ESDHC, CSU_ALL_RW}, + {CSU_CSLX_IFC, CSU_ALL_RW}, + {CSU_CSLX_I2C1, CSU_ALL_RW}, + {CSU_CSLX_I2C3, CSU_ALL_RW}, + {CSU_CSLX_I2C2, CSU_ALL_RW}, + {CSU_CSLX_DUART2, CSU_ALL_RW}, + {CSU_CSLX_DUART1, CSU_ALL_RW}, + {CSU_CSLX_WDT2, CSU_ALL_RW}, + {CSU_CSLX_WDT1, CSU_ALL_RW}, + {CSU_CSLX_EDMA, CSU_ALL_RW}, + {CSU_CSLX_SYS_CNT, CSU_ALL_RW}, + {CSU_CSLX_DMA_MUX2, CSU_ALL_RW}, + {CSU_CSLX_DMA_MUX1, CSU_ALL_RW}, + {CSU_CSLX_DDR, CSU_ALL_RW}, + {CSU_CSLX_QUICC, CSU_ALL_RW}, + {CSU_CSLX_DCFG_CCU_RCPM, CSU_ALL_RW}, + {CSU_CSLX_SECURE_BOOTROM, CSU_ALL_RW}, + {CSU_CSLX_SFP, CSU_ALL_RW}, + {CSU_CSLX_TMU, CSU_ALL_RW}, + {CSU_CSLX_SECURE_MONITOR, CSU_ALL_RW}, + {CSU_CSLX_SCFG, CSU_ALL_RW}, + {CSU_CSLX_FM, CSU_ALL_RW}, + {CSU_CSLX_SEC5_5, CSU_ALL_RW}, + {CSU_CSLX_BM, CSU_ALL_RW}, + {CSU_CSLX_QM, CSU_ALL_RW}, + {CSU_CSLX_GPIO2, CSU_ALL_RW}, + {CSU_CSLX_GPIO1, CSU_ALL_RW}, + {CSU_CSLX_GPIO4, CSU_ALL_RW}, + {CSU_CSLX_GPIO3, CSU_ALL_RW}, + {CSU_CSLX_PLATFORM_CONT, CSU_ALL_RW}, + {CSU_CSLX_CSU, CSU_ALL_RW}, + {CSU_CSLX_IIC4, CSU_ALL_RW}, + {CSU_CSLX_WDT4, CSU_ALL_RW}, + {CSU_CSLX_WDT3, CSU_ALL_RW}, + {CSU_CSLX_ESDHC2, CSU_ALL_RW}, + {CSU_CSLX_WDT5, CSU_ALL_RW}, + {CSU_CSLX_SAI2, CSU_ALL_RW}, + {CSU_CSLX_SAI1, CSU_ALL_RW}, + {CSU_CSLX_SAI4, CSU_ALL_RW}, + {CSU_CSLX_SAI3, CSU_ALL_RW}, + {CSU_CSLX_FTM2, CSU_ALL_RW}, + {CSU_CSLX_FTM1, CSU_ALL_RW}, + {CSU_CSLX_FTM4, CSU_ALL_RW}, + {CSU_CSLX_FTM3, CSU_ALL_RW}, + {CSU_CSLX_FTM6, CSU_ALL_RW}, + {CSU_CSLX_FTM5, CSU_ALL_RW}, + {CSU_CSLX_FTM8, CSU_ALL_RW}, + {CSU_CSLX_FTM7, CSU_ALL_RW}, + {CSU_CSLX_DSCR, CSU_ALL_RW}, +}; + +static void set_devices_ns_access(unsigned long index, u16 val) +{ + u32 *base = IOMEM(LSCH2_CSU_ADDR); + u32 *reg; + uint32_t tmp; + + reg = base + index / 2; + tmp = in_be32(reg); + if (index % 2 == 0) { + tmp &= 0x0000ffff; + tmp |= val << 16; + } else { + tmp &= 0xffff0000; + tmp |= val; + } + + out_be32(reg, tmp); +} + +static void init_csu(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(ns_dev); i++) + set_devices_ns_access(ns_dev[i].ind, ns_dev[i].val); +} + +void ls1046a_init_lowlevel(void) +{ + struct ccsr_cci400 __iomem *cci = IOMEM(LSCH2_CCI400_ADDR); + struct ccsr_scfg *scfg = IOMEM(LSCH2_SCFG_ADDR); + + init_csu(); + ls1046a_init_l2_latency(); + set_cntfrq(25000000); + syscnt_enable(IOMEM(LSCH2_SYS_COUNTER_ADDR)); + + /* Make SEC reads and writes snoopable */ + setbits_be32(&scfg->snpcnfgcr, SCFG_SNPCNFGCR_SECRDSNP | + SCFG_SNPCNFGCR_SECWRSNP | + SCFG_SNPCNFGCR_SATARDSNP | + SCFG_SNPCNFGCR_SATAWRSNP); + + /* + * Enable snoop requests and DVM message requests for + * Slave insterface S4 (A53 core cluster) + */ + if (current_el() == 3) { + out_le32(&cci->slave[4].snoop_ctrl, + CCI400_DVM_MESSAGE_REQ_EN | CCI400_SNOOP_REQ_EN); + } + + ls1046a_errata(); +} diff --git a/arch/arm/mach-layerscape/lowlevel.S b/arch/arm/mach-layerscape/lowlevel.S new file mode 100644 index 0000000000..adb3e54367 --- /dev/null +++ b/arch/arm/mach-layerscape/lowlevel.S @@ -0,0 +1,18 @@ +#include <linux/linkage.h> + +.section .text.ls1046a_init_l2_latency +ENTRY(ls1046a_init_l2_latency) + /* Initialize the L2 RAM latency */ + mrs x1, S3_1_c11_c0_2 + mov x0, #0x1C7 + /* Clear L2 Tag RAM latency and L2 Data RAM latency */ + bic x1, x1, x0 + /* Set L2 data ram latency bits [2:0] */ + orr x1, x1, #0x2 + /* set L2 tag ram latency bits [8:6] */ + orr x1, x1, #0x80 + msr S3_1_c11_c0_2, x1 + isb + + ret +ENDPROC(ls1046a_init_l2_latency); diff --git a/arch/arm/mach-omap/Kconfig b/arch/arm/mach-omap/Kconfig index 49ca0ee157..e9228809f0 100644 --- a/arch/arm/mach-omap/Kconfig +++ b/arch/arm/mach-omap/Kconfig @@ -193,7 +193,7 @@ config MACH_WAGO_PFC_AM35XX endif -source arch/arm/boards/phytec-som-am335x/Kconfig +source "arch/arm/boards/phytec-som-am335x/Kconfig" choice prompt "Select OMAP board" diff --git a/arch/arm/mach-samsung/Kconfig b/arch/arm/mach-samsung/Kconfig index a2ddabf589..fa1a3ddcc4 100644 --- a/arch/arm/mach-samsung/Kconfig +++ b/arch/arm/mach-samsung/Kconfig @@ -73,7 +73,7 @@ config MACH_A9M2410DEV endchoice -source arch/arm/boards/friendlyarm-mini2440/Kconfig +source "arch/arm/boards/friendlyarm-mini2440/Kconfig" endmenu @@ -106,7 +106,7 @@ endchoice menu "Board specific settings" -source arch/arm/boards/friendlyarm-tiny6410/Kconfig +source "arch/arm/boards/friendlyarm-tiny6410/Kconfig" endmenu diff --git a/arch/arm/mach-stm32mp1/Kconfig b/arch/arm/mach-stm32mp1/Kconfig new file mode 100644 index 0000000000..cc7cf23cfb --- /dev/null +++ b/arch/arm/mach-stm32mp1/Kconfig @@ -0,0 +1,10 @@ +if ARCH_STM32MP1 + +config ARCH_STM32MP1157 + bool + +config MACH_STM32MP157C_DK2 + select ARCH_STM32MP1157 + bool "STM32MP157C-DK2 board" + +endif diff --git a/arch/arm/mach-stm32mp1/Makefile b/arch/arm/mach-stm32mp1/Makefile new file mode 100644 index 0000000000..16a218658a --- /dev/null +++ b/arch/arm/mach-stm32mp1/Makefile @@ -0,0 +1 @@ +obj- := __dummy__.o diff --git a/arch/arm/mach-stm32mp1/include/mach/debug_ll.h b/arch/arm/mach-stm32mp1/include/mach/debug_ll.h new file mode 100644 index 0000000000..99fedb91fe --- /dev/null +++ b/arch/arm/mach-stm32mp1/include/mach/debug_ll.h @@ -0,0 +1,28 @@ +#ifndef __MACH_STM32MP1_DEBUG_LL_H +#define __MACH_STM32MP1_DEBUG_LL_H + +#include <io.h> +#include <mach/stm32.h> + +#define DEBUG_LL_UART_ADDR STM32_UART4_BASE + +#define CR1_OFFSET 0x00 +#define CR3_OFFSET 0x08 +#define BRR_OFFSET 0x0c +#define ISR_OFFSET 0x1c +#define ICR_OFFSET 0x20 +#define RDR_OFFSET 0x24 +#define TDR_OFFSET 0x28 + +#define USART_ISR_TXE BIT(7) + +static inline void PUTC_LL(int c) +{ + void __iomem *base = IOMEM(DEBUG_LL_UART_ADDR); + + writel(c, base + TDR_OFFSET); + + while ((readl(base + ISR_OFFSET) & USART_ISR_TXE) == 0); +} + +#endif /* __MACH_STM32MP1_DEBUG_LL_H */ diff --git a/arch/arm/mach-stm32mp1/include/mach/stm32.h b/arch/arm/mach-stm32mp1/include/mach/stm32.h new file mode 100644 index 0000000000..f9bdb788b9 --- /dev/null +++ b/arch/arm/mach-stm32mp1/include/mach/stm32.h @@ -0,0 +1,35 @@ +/* SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause */ +/* + * Copyright (C) 2018, STMicroelectronics - All Rights Reserved + */ + +#ifndef _MACH_STM32_H_ +#define _MACH_STM32_H_ + +/* + * Peripheral memory map + */ +#define STM32_RCC_BASE 0x50000000 +#define STM32_PWR_BASE 0x50001000 +#define STM32_DBGMCU_BASE 0x50081000 +#define STM32_BSEC_BASE 0x5C005000 +#define STM32_TZC_BASE 0x5C006000 +#define STM32_ETZPC_BASE 0x5C007000 +#define STM32_TAMP_BASE 0x5C00A000 + +#define STM32_USART1_BASE 0x5C000000 +#define STM32_USART2_BASE 0x4000E000 +#define STM32_USART3_BASE 0x4000F000 +#define STM32_UART4_BASE 0x40010000 +#define STM32_UART5_BASE 0x40011000 +#define STM32_USART6_BASE 0x44003000 +#define STM32_UART7_BASE 0x40018000 +#define STM32_UART8_BASE 0x40019000 + +#define STM32_SYSRAM_BASE 0x2FFC0000 +#define STM32_SYSRAM_SIZE SZ_256K + +#define STM32_DDR_BASE 0xC0000000 +#define STM32_DDR_SIZE SZ_1G + +#endif /* _MACH_STM32_H_ */ diff --git a/arch/arm/mach-versatile/Kconfig b/arch/arm/mach-versatile/Kconfig index 3c5cced455..95172cff8c 100644 --- a/arch/arm/mach-versatile/Kconfig +++ b/arch/arm/mach-versatile/Kconfig @@ -23,6 +23,6 @@ config MACH_VERSATILEPB_ARM1176 endchoice -source arch/arm/boards/versatile/Kconfig +source "arch/arm/boards/versatile/Kconfig" endif diff --git a/arch/arm/pbl/Makefile b/arch/arm/pbl/Makefile index 2c28f56034..5d7e85b373 100644 --- a/arch/arm/pbl/Makefile +++ b/arch/arm/pbl/Makefile @@ -31,7 +31,7 @@ $(obj)/zbarebox.S: $(obj)/zbarebox FORCE $(call if_changed,disasm) PBL_CPPFLAGS += -fdata-sections -ffunction-sections -LDFLAGS_zbarebox := -Map $(obj)/zbarebox.map --gc-sections --no-dynamic-linker +LDFLAGS_zbarebox := -Map $(obj)/zbarebox.map --gc-sections ifdef CONFIG_PBL_RELOCATABLE LDFLAGS_zbarebox += -pie else diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index eab9452de9..a4070cfe32 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -109,12 +109,12 @@ config MACH_MIPS_XBURST select GPIOLIB endchoice -source arch/mips/mach-malta/Kconfig -source arch/mips/mach-ar231x/Kconfig -source arch/mips/mach-ath79/Kconfig -source arch/mips/mach-bcm47xx/Kconfig -source arch/mips/mach-loongson/Kconfig -source arch/mips/mach-xburst/Kconfig +source "arch/mips/mach-malta/Kconfig" +source "arch/mips/mach-ar231x/Kconfig" +source "arch/mips/mach-ath79/Kconfig" +source "arch/mips/mach-bcm47xx/Kconfig" +source "arch/mips/mach-loongson/Kconfig" +source "arch/mips/mach-xburst/Kconfig" endmenu diff --git a/arch/mips/lib/pbl.lds.S b/arch/mips/lib/pbl.lds.S index 1f0285dd6f..f1752ec720 100644 --- a/arch/mips/lib/pbl.lds.S +++ b/arch/mips/lib/pbl.lds.S @@ -38,6 +38,8 @@ SECTIONS . = ALIGN(4); .data : { *(.data*) } + pbl_code_size = . - HEAD_TEXT_BASE; + . = ALIGN(4); __piggydata_start = .; .piggydata : { @@ -45,9 +47,12 @@ SECTIONS } __piggydata_end = .; + pbl_image_size = . - HEAD_TEXT_BASE; + . = ALIGN(4); __bss_start = .; .bss : { *(.bss*) } __bss_stop = .; + pbl_memory_size = . - HEAD_TEXT_BASE; _end = .; } diff --git a/arch/mips/mach-ath79/art.c b/arch/mips/mach-ath79/art.c index 984d087363..2a2099e9f5 100644 --- a/arch/mips/mach-ath79/art.c +++ b/arch/mips/mach-ath79/art.c @@ -44,8 +44,8 @@ static int art_read_mac(struct device_d *dev, const char *file) fd = open_and_lseek(file, O_RDONLY, AR93000_EPPROM_OFFSET); if (fd < 0) { dev_err(dev, "Failed to open eeprom path %s %d\n", - file, fd); - return fd; + file, -errno); + return -errno; } rbytes = read_full(fd, &eeprom, sizeof(eeprom)); diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig index 7a45ced7cd..798f342fa4 100644 --- a/arch/ppc/Kconfig +++ b/arch/ppc/Kconfig @@ -18,5 +18,5 @@ config ARCH_MPC85XX bool "Freescale MPC85xx" endchoice -source arch/ppc/mach-mpc5xxx/Kconfig -source arch/ppc/mach-mpc85xx/Kconfig +source "arch/ppc/mach-mpc5xxx/Kconfig" +source "arch/ppc/mach-mpc85xx/Kconfig" diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig index c435cc8a31..16c3eecce6 100644 --- a/arch/riscv/Kconfig +++ b/arch/riscv/Kconfig @@ -62,7 +62,7 @@ config BUILTIN_DTB_NAME string "DTB to build into the barebox image" depends on BUILTIN_DTB -source arch/riscv/mach-erizo/Kconfig +source "arch/riscv/mach-erizo/Kconfig" endmenu diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 3f91585d02..1793055ae0 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -95,5 +95,5 @@ choice endchoice -source arch/x86/boot/Kconfig -source arch/x86/mach-i386/Kconfig +source "arch/x86/boot/Kconfig" +source "arch/x86/mach-i386/Kconfig" diff --git a/commands/crc.c b/commands/crc.c index edb1fb125c..580521d677 100644 --- a/commands/crc.c +++ b/commands/crc.c @@ -138,8 +138,8 @@ BAREBOX_CMD_HELP_OPT ("-F FILE", "Use file to compare.") #endif BAREBOX_CMD_HELP_OPT ("-v CRC", "Verify") BAREBOX_CMD_HELP_OPT ("-V FILE", "Verify with CRC read from FILE") -BAREBOX_CMD_HELP_OPT ("-r <var>", "Set <var> to the checksum result\n") -BAREBOX_CMD_HELP_OPT ("-s <var>", "Set <var> to the data size\n") +BAREBOX_CMD_HELP_OPT ("-r <var>", "Set <var> to the checksum result") +BAREBOX_CMD_HELP_OPT ("-s <var>", "Set <var> to the data size") BAREBOX_CMD_HELP_END BAREBOX_CMD_START(crc32) diff --git a/commands/firmwareload.c b/commands/firmwareload.c index 071f25be99..dbd43e046d 100644 --- a/commands/firmwareload.c +++ b/commands/firmwareload.c @@ -55,8 +55,8 @@ static int do_firmwareload(int argc, char *argv[]) BAREBOX_CMD_HELP_START(firmwareload) BAREBOX_CMD_HELP_TEXT("Options:") -BAREBOX_CMD_HELP_OPT("-t <target>", "define the firmware handler by name\n") -BAREBOX_CMD_HELP_OPT("-l\t", "list devices capable of firmware loading\n") +BAREBOX_CMD_HELP_OPT("-t <target>", "define the firmware handler by name") +BAREBOX_CMD_HELP_OPT("-l\t", "list devices capable of firmware loading") BAREBOX_CMD_HELP_END BAREBOX_CMD_START(firmwareload) diff --git a/commands/loadb.c b/commands/loadb.c index 8c3906ca42..37c272f6c7 100644 --- a/commands/loadb.c +++ b/commands/loadb.c @@ -33,6 +33,7 @@ #include <command.h> #include <console.h> #include <errno.h> +#include <libfile.h> #include <environment.h> #include <cache.h> #include <getopt.h> @@ -661,21 +662,11 @@ static int do_load_serial_bin(int argc, char *argv[]) output_file = DEF_FILE; /* File should exist */ - ofd = open(output_file, O_WRONLY | O_CREAT); + ofd = open_and_lseek(output_file, O_WRONLY | O_CREAT, offset); if (ofd < 0) { perror(argv[0]); return 3; } - /* Seek to the right offset */ - if (offset) { - int seek = lseek(ofd, offset, SEEK_SET); - if (seek != offset) { - close(ofd); - ofd = 0; - perror(argv[0]); - return 4; - } - } printf("## Ready for binary (kermit) download " "to 0x%08lX offset on %s device at %d bps...\n", offset, diff --git a/commands/loadxy.c b/commands/loadxy.c index 2bfe482fc5..85efad67c7 100644 --- a/commands/loadxy.c +++ b/commands/loadxy.c @@ -37,6 +37,7 @@ #include <fcntl.h> #include <fs.h> #include <malloc.h> +#include <libfile.h> #define DEF_FILE "image.bin" @@ -176,21 +177,11 @@ static int do_loadx(int argc, char *argv[]) output_file = DEF_FILE; /* File should exist */ - ofd = open(output_file, O_WRONLY | O_CREAT); + ofd = open_and_lseek(output_file, O_WRONLY | O_CREAT, offset); if (ofd < 0) { perror(argv[0]); return 3; } - /* Seek to the right offset */ - if (offset) { - int seek = lseek(ofd, offset, SEEK_SET); - if (seek != offset) { - close(ofd); - ofd = 0; - perror(argv[0]); - return 4; - } - } current_baudrate = console_get_baudrate(cdev); diff --git a/commands/memcpy.c b/commands/memcpy.c index ddaf767eac..ef25fb7b23 100644 --- a/commands/memcpy.c +++ b/commands/memcpy.c @@ -84,9 +84,9 @@ static int do_memcpy(int argc, char *argv[]) buf = xmalloc(RW_BUF_SIZE); while (count > 0) { - int now, r, w, tmp; + int now, r; - now = min((loff_t)RW_BUF_SIZE, count); + now = min_t(loff_t, RW_BUF_SIZE, count); r = read(sourcefd, buf, now); if (r < 0) { @@ -97,19 +97,9 @@ static int do_memcpy(int argc, char *argv[]) if (!r) break; - tmp = 0; - now = r; - while (now) { - w = write(destfd, buf + tmp, now); - if (w < 0) { - perror("write"); - goto out; - } - if (!w) - break; - - now -= w; - tmp += w; + if (write_full(destfd, buf, r) < 0) { + perror("write"); + goto out; } count -= r; diff --git a/commands/of_display_timings.c b/commands/of_display_timings.c index ccf2db0da5..365ff80c36 100644 --- a/commands/of_display_timings.c +++ b/commands/of_display_timings.c @@ -148,10 +148,10 @@ static int do_of_display_timings(int argc, char *argv[]) BAREBOX_CMD_HELP_START(of_display_timings) BAREBOX_CMD_HELP_TEXT("Options:") -BAREBOX_CMD_HELP_OPT("-l", "list path of all available display-timings\n") -BAREBOX_CMD_HELP_OPT("-s", "list path of all selected display-timings\n") -BAREBOX_CMD_HELP_OPT("-S path", "select display-timings and register oftree fixup\n") -BAREBOX_CMD_HELP_OPT("-f dtb", "work on dtb. Has no effect on -s option\n") +BAREBOX_CMD_HELP_OPT("-l", "list path of all available display-timings") +BAREBOX_CMD_HELP_OPT("-s", "list path of all selected display-timings") +BAREBOX_CMD_HELP_OPT("-S path", "select display-timings and register oftree fixup") +BAREBOX_CMD_HELP_OPT("-f dtb", "work on dtb. Has no effect on -s option") BAREBOX_CMD_HELP_END BAREBOX_CMD_START(of_display_timings) diff --git a/commands/of_dump.c b/commands/of_dump.c index 7bec0b925e..06b8e9fcda 100644 --- a/commands/of_dump.c +++ b/commands/of_dump.c @@ -139,9 +139,9 @@ out: BAREBOX_CMD_HELP_START(of_dump) BAREBOX_CMD_HELP_TEXT("Options:") -BAREBOX_CMD_HELP_OPT ("-f dtb", "work on dtb instead of internal devicetree\n") -BAREBOX_CMD_HELP_OPT ("-F", "return fixed devicetree\n") -BAREBOX_CMD_HELP_OPT ("-n", "Print node names only, no properties\n") +BAREBOX_CMD_HELP_OPT ("-f dtb", "work on dtb instead of internal devicetree") +BAREBOX_CMD_HELP_OPT ("-F", "return fixed devicetree") +BAREBOX_CMD_HELP_OPT ("-n", "Print node names only, no properties") BAREBOX_CMD_HELP_END BAREBOX_CMD_START(of_dump) diff --git a/commands/of_fixup_status.c b/commands/of_fixup_status.c index 9a4a619195..e0da429ac3 100644 --- a/commands/of_fixup_status.c +++ b/commands/of_fixup_status.c @@ -59,7 +59,7 @@ static int do_of_fixup_status(int argc, char *argv[]) BAREBOX_CMD_HELP_START(of_fixup_status) BAREBOX_CMD_HELP_TEXT("Options:") BAREBOX_CMD_HELP_OPT("-d", "disable node") -BAREBOX_CMD_HELP_OPT("path", "Node path\n") +BAREBOX_CMD_HELP_OPT("path", "Node path") BAREBOX_CMD_HELP_TEXT("Register a fixup to enable or disable a device tree node.") BAREBOX_CMD_HELP_TEXT("Nodes are enabled on default. Disabled with -d.") BAREBOX_CMD_HELP_END diff --git a/commands/oftree.c b/commands/oftree.c index 26a47bb581..299c2edfcd 100644 --- a/commands/oftree.c +++ b/commands/oftree.c @@ -123,8 +123,8 @@ out: BAREBOX_CMD_HELP_START(oftree) BAREBOX_CMD_HELP_TEXT("Options:") -BAREBOX_CMD_HELP_OPT ("-l <DTB>", "Load <DTB> to internal devicetree\n") -BAREBOX_CMD_HELP_OPT ("-s <DTB>", "save internal devicetree to <DTB>\n") +BAREBOX_CMD_HELP_OPT ("-l <DTB>", "Load <DTB> to internal devicetree") +BAREBOX_CMD_HELP_OPT ("-s <DTB>", "save internal devicetree to <DTB>") BAREBOX_CMD_HELP_OPT ("-p", "probe devices from stored device tree") BAREBOX_CMD_HELP_END diff --git a/common/Kconfig b/common/Kconfig index 43b657019f..7832df5c55 100644 --- a/common/Kconfig +++ b/common/Kconfig @@ -630,7 +630,9 @@ config BOOTM_FITIMAGE_PUBKEY default "../fit/pubkey.dtsi" depends on BOOTM_FITIMAGE_SIGNATURE help - Set Path to a dts snippet which holds the public keys for FIT images. + Set Path to a dts snippet which holds the public keys for FIT images. The + snippet can then be included in a device tree with + "#include CONFIG_BOOTM_FITIMAGE_PUBKEY". config BOOTM_FORCE_SIGNED_IMAGES bool @@ -762,13 +764,13 @@ config PBL_CONSOLE must be running at the address it's linked at and bss must be cleared. On ARM that would be after setup_c(). -source common/ratp/Kconfig +source "common/ratp/Kconfig" config PARTITION bool prompt "Enable Partitions" -source common/partitions/Kconfig +source "common/partitions/Kconfig" config ENV_HANDLING select CRC32 @@ -1236,6 +1238,14 @@ config DEBUG_SOCFPGA_UART_CLOCK help Choose UART root clock. +config DEBUG_LAYERSCAPE_UART_PORT + int "Layerscape UART port selection" + depends on ARCH_LAYERSCAPE + default 1 + help + Select the UART port number used for early debugging here. Port + numbers start counting from 1. + config DEBUG_INITCALLS bool "Trace initcalls" help diff --git a/common/filetype.c b/common/filetype.c index f8b6bc8954..fb029a7739 100644 --- a/common/filetype.c +++ b/common/filetype.c @@ -383,7 +383,7 @@ enum filetype file_name_detect_type_offset(const char *filename, loff_t pos) fd = open_and_lseek(filename, O_RDONLY, pos); if (fd < 0) - return fd; + goto out; buf = xzalloc(FILE_TYPE_SAFE_BUFSIZE); @@ -396,7 +396,7 @@ enum filetype file_name_detect_type_offset(const char *filename, loff_t pos) err_out: close(fd); free(buf); - +out: return type; } diff --git a/common/state/backend_bucket_circular.c b/common/state/backend_bucket_circular.c index da7c8421ae..4676730d05 100644 --- a/common/state/backend_bucket_circular.c +++ b/common/state/backend_bucket_circular.c @@ -162,11 +162,10 @@ static int state_mtd_peb_read(struct state_backend_storage_bucket_circular *circ offset += (off_t)circ->eraseblock * circ->mtd->erasesize; - ret = lseek(circ->fd, offset, SEEK_SET); - if (ret < 0) { + if (lseek(circ->fd, offset, SEEK_SET) != offset) { dev_err(circ->dev, "Failed to set circular read position to %lld, %d\n", - (long long) offset, ret); - return ret; + (long long) offset, -errno); + return -errno; } dev_dbg(circ->dev, "Read state from %lld length %d\n", (long long) offset, @@ -191,11 +190,10 @@ static int state_mtd_peb_write(struct state_backend_storage_bucket_circular *cir offset += circ->eraseblock * circ->mtd->erasesize; - ret = lseek(circ->fd, offset, SEEK_SET); - if (ret < 0) { + if (lseek(circ->fd, offset, SEEK_SET) != offset) { dev_err(circ->dev, "Failed to set position for circular write %lld, %d\n", - (long long) offset, ret); - return ret; + (long long) offset, -errno); + return -errno; } ret = write_full(circ->fd, buf, len); diff --git a/common/state/backend_bucket_direct.c b/common/state/backend_bucket_direct.c index 1f00b0fb2f..95ddb93106 100644 --- a/common/state/backend_bucket_direct.c +++ b/common/state/backend_bucket_direct.c @@ -56,10 +56,9 @@ static int state_backend_bucket_direct_read(struct state_backend_storage_bucket void *buf; int ret; - ret = lseek(direct->fd, direct->offset, SEEK_SET); - if (ret < 0) { - dev_err(direct->dev, "Failed to seek file, %d\n", ret); - return ret; + if (lseek(direct->fd, direct->offset, SEEK_SET) != direct->offset) { + dev_err(direct->dev, "Failed to seek file, %d\n", -errno); + return -errno; } ret = read_full(direct->fd, &meta, sizeof(meta)); if (ret < 0) { @@ -77,10 +76,11 @@ static int state_backend_bucket_direct_read(struct state_backend_storage_bucket return -EINVAL; } read_len = direct->max_size; - ret = lseek(direct->fd, direct->offset, SEEK_SET); - if (ret < 0) { - dev_err(direct->dev, "Failed to seek file, %d\n", ret); - return ret; + if (lseek(direct->fd, direct->offset, SEEK_SET) != + direct->offset) { + dev_err(direct->dev, "Failed to seek file, %d\n", + -errno); + return -errno; } } @@ -113,10 +113,9 @@ static int state_backend_bucket_direct_write(struct state_backend_storage_bucket if (len > direct->max_size - sizeof(meta)) return -E2BIG; - ret = lseek(direct->fd, direct->offset, SEEK_SET); - if (ret < 0) { - dev_err(direct->dev, "Failed to seek file, %d\n", ret); - return ret; + if (lseek(direct->fd, direct->offset, SEEK_SET) != direct->offset) { + dev_err(direct->dev, "Failed to seek file, %d\n", -errno); + return -errno; } /* write the meta data only if there is head room */ diff --git a/common/uimage.c b/common/uimage.c index 3273bc1871..35bfb10b06 100644 --- a/common/uimage.c +++ b/common/uimage.c @@ -265,11 +265,12 @@ int uimage_verify(struct uimage_handle *handle) { u32 crc = 0; int len, ret; + loff_t off; void *buf; - ret = lseek(handle->fd, sizeof(struct image_header), SEEK_SET); - if (ret < 0) - return ret; + off = sizeof(struct image_header); + if (lseek(handle->fd, off, SEEK_SET) != off) + return -errno; buf = xmalloc(PAGE_SIZE); @@ -307,6 +308,7 @@ int uimage_load(struct uimage_handle *handle, unsigned int image_no, image_header_t *hdr = &handle->header; struct uimage_handle_data *iha; int ret; + loff_t off; int (*uncompress_fn)(unsigned char *inbuf, int len, int(*fill)(void*, unsigned int), int(*flush)(void*, unsigned int), @@ -319,10 +321,9 @@ int uimage_load(struct uimage_handle *handle, unsigned int image_no, iha = &handle->ihd[image_no]; - ret = lseek(handle->fd, iha->offset + handle->data_offset, - SEEK_SET); - if (ret < 0) - return ret; + off = iha->offset + handle->data_offset; + if (lseek(handle->fd, off, SEEK_SET) != off) + return -errno; /* if ramdisk U-Boot expect to ignore the compression type */ if (hdr->ih_comp == IH_COMP_NONE || hdr->ih_type == IH_TYPE_RAMDISK) @@ -456,6 +457,7 @@ void *uimage_load_to_buf(struct uimage_handle *handle, int image_no, { u32 size; int ret; + loff_t off; struct uimage_handle_data *ihd; char ftbuf[128]; enum filetype ft; @@ -466,9 +468,8 @@ void *uimage_load_to_buf(struct uimage_handle *handle, int image_no, ihd = &handle->ihd[image_no]; - ret = lseek(handle->fd, ihd->offset + handle->data_offset, - SEEK_SET); - if (ret < 0) + off = ihd->offset + handle->data_offset; + if (lseek(handle->fd, off, SEEK_SET) != off) return NULL; if (handle->header.ih_comp == IH_COMP_NONE) { @@ -496,10 +497,8 @@ void *uimage_load_to_buf(struct uimage_handle *handle, int image_no, if (ft != filetype_gzip) return NULL; - ret = lseek(handle->fd, ihd->offset + handle->data_offset + - ihd->len - 4, - SEEK_SET); - if (ret < 0) + off = ihd->offset + handle->data_offset + ihd->len - 4; + if (lseek(handle->fd, off, SEEK_SET) != off) return NULL; ret = read(handle->fd, &size, 4); @@ -508,9 +507,8 @@ void *uimage_load_to_buf(struct uimage_handle *handle, int image_no, size = le32_to_cpu(size); - ret = lseek(handle->fd, ihd->offset + handle->data_offset, - SEEK_SET); - if (ret < 0) + off = ihd->offset + handle->data_offset; + if (lseek(handle->fd, off, SEEK_SET) != off) return NULL; buf = malloc(size); diff --git a/drivers/Kconfig b/drivers/Kconfig index d6fbcbfe16..f75da26982 100644 --- a/drivers/Kconfig +++ b/drivers/Kconfig @@ -40,5 +40,6 @@ source "drivers/crypto/Kconfig" source "drivers/memory/Kconfig" source "drivers/soc/imx/Kconfig" source "drivers/nvme/Kconfig" +source "drivers/ddr/Kconfig" endmenu diff --git a/drivers/Makefile b/drivers/Makefile index 65fd488ce9..fb7fcd3fc2 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -40,3 +40,4 @@ obj-$(CONFIG_AIODEV) += aiodev/ obj-y += memory/ obj-y += soc/imx/ obj-y += nvme/ +obj-y += ddr/ diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index b416105970..e6723a337c 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -27,7 +27,6 @@ #include <io.h> #include <of.h> #include <malloc.h> -#include <scsi.h> #include <linux/ctype.h> #include <linux/err.h> #include <disks.h> diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index 34c44fff9b..5f28329069 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -14,4 +14,6 @@ obj-$(CONFIG_SOC_QCA_AR9331) += clk-ar933x.o obj-$(CONFIG_SOC_QCA_AR9344) += clk-ar9344.o obj-$(CONFIG_ARCH_IMX) += imx/ obj-$(CONFIG_COMMON_CLK_AT91) += at91/ +obj-$(CONFIG_ARCH_STM32MP) += clk-stm32mp1.o obj-$(CONFIG_MACH_VEXPRESS) += vexpress/ +obj-$(CONFIG_ARCH_LAYERSCAPE) += clk-qoric.o diff --git a/drivers/clk/clk-composite.c b/drivers/clk/clk-composite.c index 5d21a0e7e1..e21ab98453 100644 --- a/drivers/clk/clk-composite.c +++ b/drivers/clk/clk-composite.c @@ -54,7 +54,10 @@ static unsigned long clk_composite_recalc_rate(struct clk *clk, struct clk_composite *composite = to_clk_composite(clk); struct clk *rate_clk = composite->rate_clk; - return rate_clk ? rate_clk->ops->recalc_rate(rate_clk, parent_rate) : 0; + if (rate_clk) + return rate_clk->ops->recalc_rate(rate_clk, parent_rate); + + return parent_rate; } static long clk_composite_round_rate(struct clk *clk, unsigned long rate, @@ -113,7 +116,7 @@ static struct clk_ops clk_composite_ops = { }; struct clk *clk_register_composite(const char *name, - const char **parent_names, int num_parents, + const char * const *parent_names, int num_parents, struct clk *mux_clk, struct clk *rate_clk, struct clk *gate_clk, diff --git a/drivers/clk/clk-divider.c b/drivers/clk/clk-divider.c index 7b1bdde1ce..d9d3407e75 100644 --- a/drivers/clk/clk-divider.c +++ b/drivers/clk/clk-divider.c @@ -203,8 +203,12 @@ static int clk_divider_bestdiv(struct clk *clk, unsigned long rate, static long clk_divider_round_rate(struct clk *clk, unsigned long rate, unsigned long *parent_rate) { + struct clk_divider *divider = container_of(clk, struct clk_divider, clk); int div; + if (divider->flags & CLK_DIVIDER_READ_ONLY) + return clk_divider_recalc_rate(clk, *parent_rate); + div = clk_divider_bestdiv(clk, rate, parent_rate); return *parent_rate / div; @@ -217,6 +221,9 @@ static int clk_divider_set_rate(struct clk *clk, unsigned long rate, unsigned int div, value; u32 val; + if (divider->flags & CLK_DIVIDER_READ_ONLY) + return 0; + if (clk->flags & CLK_SET_RATE_PARENT) { unsigned long best_parent_rate = parent_rate; div = clk_divider_bestdiv(clk, rate, &best_parent_rate); @@ -249,7 +256,8 @@ struct clk_ops clk_divider_ops = { }; struct clk *clk_divider_alloc(const char *name, const char *parent, - void __iomem *reg, u8 shift, u8 width, unsigned flags) + unsigned clk_flags, void __iomem *reg, u8 shift, + u8 width, unsigned div_flags) { struct clk_divider *div = xzalloc(sizeof(*div)); @@ -257,9 +265,10 @@ struct clk *clk_divider_alloc(const char *name, const char *parent, div->reg = reg; div->width = width; div->parent = parent; + div->flags = div_flags; div->clk.ops = &clk_divider_ops; div->clk.name = name; - div->clk.flags = flags; + div->clk.flags = clk_flags; div->clk.parent_names = &div->parent; div->clk.num_parents = 1; @@ -273,13 +282,14 @@ void clk_divider_free(struct clk *clk) free(d); } -struct clk *clk_divider(const char *name, const char *parent, - void __iomem *reg, u8 shift, u8 width, unsigned flags) +struct clk *clk_divider(const char *name, const char *parent, unsigned clk_flags, + void __iomem *reg, u8 shift, u8 width, unsigned div_flags) { struct clk *d; int ret; - d = clk_divider_alloc(name , parent, reg, shift, width, flags); + d = clk_divider_alloc(name , parent, clk_flags, reg, shift, width, + div_flags); ret = clk_register(d); if (ret) { @@ -291,12 +301,13 @@ struct clk *clk_divider(const char *name, const char *parent, } struct clk *clk_divider_one_based(const char *name, const char *parent, - void __iomem *reg, u8 shift, u8 width, unsigned flags) + unsigned clk_flags, void __iomem *reg, u8 shift, + u8 width, unsigned div_flags) { struct clk_divider *div; struct clk *clk; - clk = clk_divider(name, parent, reg, shift, width, flags); + clk = clk_divider(name, parent, clk_flags, reg, shift, width, div_flags); if (IS_ERR(clk)) return clk; @@ -306,9 +317,10 @@ struct clk *clk_divider_one_based(const char *name, const char *parent, return clk; } -struct clk *clk_divider_table(const char *name, - const char *parent, void __iomem *reg, u8 shift, u8 width, - const struct clk_div_table *table, unsigned flags) +struct clk *clk_divider_table(const char *name, const char *parent, + unsigned clk_flags, void __iomem *reg, u8 shift, + u8 width, const struct clk_div_table *table, + unsigned div_flags) { struct clk_divider *div = xzalloc(sizeof(*div)); const struct clk_div_table *clkt; @@ -318,9 +330,10 @@ struct clk *clk_divider_table(const char *name, div->reg = reg; div->width = width; div->parent = parent; + div->flags = div_flags; div->clk.ops = &clk_divider_ops; div->clk.name = name; - div->clk.flags = flags; + div->clk.flags = clk_flags; div->clk.parent_names = &div->parent; div->clk.num_parents = 1; div->table = table; diff --git a/drivers/clk/clk-gate.c b/drivers/clk/clk-gate.c index 89240ff794..b2b160555e 100644 --- a/drivers/clk/clk-gate.c +++ b/drivers/clk/clk-gate.c @@ -56,7 +56,7 @@ static void clk_gate_disable(struct clk *clk) clk_gate_endisable(clk, 0); } -static int clk_gate_is_enabled(struct clk *clk) +int clk_gate_is_enabled(struct clk *clk) { struct clk_gate *g = container_of(clk, struct clk_gate, clk); u32 val; diff --git a/drivers/clk/clk-mux.c b/drivers/clk/clk-mux.c index d5fe640dce..e9cb614005 100644 --- a/drivers/clk/clk-mux.c +++ b/drivers/clk/clk-mux.c @@ -33,6 +33,13 @@ static int clk_mux_set_parent(struct clk *clk, u8 idx) struct clk_mux *m = container_of(clk, struct clk_mux, clk); u32 val; + if (m->flags & CLK_MUX_READ_ONLY) { + if (clk_mux_get_parent(clk) != idx) + return -EPERM; + else + return 0; + } + val = readl(m->reg); val &= ~(((1 << m->width) - 1) << m->shift); val |= idx << m->shift; @@ -51,18 +58,19 @@ struct clk_ops clk_mux_ops = { .set_parent = clk_mux_set_parent, }; -struct clk *clk_mux_alloc(const char *name, void __iomem *reg, - u8 shift, u8 width, const char **parents, u8 num_parents, - unsigned flags) +struct clk *clk_mux_alloc(const char *name, unsigned clk_flags, void __iomem *reg, + u8 shift, u8 width, const char * const *parents, u8 num_parents, + unsigned mux_flags) { struct clk_mux *m = xzalloc(sizeof(*m)); m->reg = reg; m->shift = shift; m->width = width; + m->flags = mux_flags; m->clk.ops = &clk_mux_ops; m->clk.name = name; - m->clk.flags = flags; + m->clk.flags = clk_flags; m->clk.parent_names = parents; m->clk.num_parents = num_parents; @@ -76,13 +84,15 @@ void clk_mux_free(struct clk *clk_mux) free(m); } -struct clk *clk_mux(const char *name, void __iomem *reg, - u8 shift, u8 width, const char **parents, u8 num_parents, unsigned flags) +struct clk *clk_mux(const char *name, unsigned clk_flags, void __iomem *reg, + u8 shift, u8 width, const char * const *parents, + u8 num_parents, unsigned mux_flags) { struct clk *m; int ret; - m = clk_mux_alloc(name, reg, shift, width, parents, num_parents, flags); + m = clk_mux_alloc(name, clk_flags, reg, shift, width, parents, + num_parents, mux_flags); ret = clk_register(m); if (ret) { diff --git a/drivers/clk/clk-qoric.c b/drivers/clk/clk-qoric.c new file mode 100644 index 0000000000..c40c6e90d9 --- /dev/null +++ b/drivers/clk/clk-qoric.c @@ -0,0 +1,665 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * clock driver for Freescale QorIQ SoCs. + */ + +#define pr_fmt(fmt) "clk-qoric: " fmt + +#include <linux/clk.h> +#include <linux/clkdev.h> +#include <io.h> +#include <linux/kernel.h> +#include <of_address.h> +#include <of.h> +#include <asm-generic/div64.h> + +#define PLL_DIV1 0 +#define PLL_DIV2 1 +#define PLL_DIV3 2 +#define PLL_DIV4 3 + +#define PLATFORM_PLL 0 +#define CGA_PLL1 1 +#define CGA_PLL2 2 +#define CGA_PLL3 3 +#define CGA_PLL4 4 /* only on clockgen-1.0, which lacks CGB */ +#define CGB_PLL1 4 +#define CGB_PLL2 5 + +struct clockgen_pll_div { + struct clk *clk; + char name[32]; +}; + +struct clockgen_pll { + struct clockgen_pll_div div[8]; +}; + +#define CLKSEL_VALID 1 + +struct clockgen_sourceinfo { + u32 flags; /* CLKSEL_xxx */ + int pll; /* CGx_PLLn */ + int div; /* PLL_DIVn */ +}; + +#define NUM_MUX_PARENTS 16 + +struct clockgen_muxinfo { + struct clockgen_sourceinfo clksel[NUM_MUX_PARENTS]; +}; + +#define NUM_HWACCEL 5 +#define NUM_CMUX 8 + +struct clockgen; + +#define CG_PLL_8BIT 2 /* PLLCnGSR[CFG] is 8 bits, not 6 */ +#define CG_VER3 4 /* version 3 cg: reg layout different */ +#define CG_LITTLE_ENDIAN 8 + +struct clockgen_chipinfo { + const char *compat; + const struct clockgen_muxinfo *cmux_groups[2]; + const struct clockgen_muxinfo *hwaccel[NUM_HWACCEL]; + void (*init_periph)(struct clockgen *cg); + int cmux_to_group[NUM_CMUX]; /* -1 terminates if fewer than NUM_CMUX */ + u32 pll_mask; /* 1 << n bit set if PLL n is valid */ + u32 flags; /* CG_xxx */ +}; + +struct clockgen { + struct device_node *node; + void __iomem *regs; + struct clockgen_chipinfo info; /* mutable copy */ + struct clk *sysclk, *coreclk; + struct clockgen_pll pll[6]; + struct clk *cmux[NUM_CMUX]; + struct clk *hwaccel[NUM_HWACCEL]; + struct clk *fman[2]; +}; + +static struct clockgen clockgen; + +static void cg_out(struct clockgen *cg, u32 val, u32 __iomem *reg) +{ + if (cg->info.flags & CG_LITTLE_ENDIAN) + iowrite32(val, reg); + else + iowrite32be(val, reg); +} + +static u32 cg_in(struct clockgen *cg, u32 __iomem *reg) +{ + u32 val; + + if (cg->info.flags & CG_LITTLE_ENDIAN) + val = ioread32(reg); + else + val = ioread32be(reg); + + return val; +} + +static const struct clockgen_muxinfo t1023_cmux = { + { + [0] = { CLKSEL_VALID, CGA_PLL1, PLL_DIV1 }, + [1] = { CLKSEL_VALID, CGA_PLL1, PLL_DIV2 }, + } +}; + +static const struct clockgen_muxinfo t1040_cmux = { + { + [0] = { CLKSEL_VALID, CGA_PLL1, PLL_DIV1 }, + [1] = { CLKSEL_VALID, CGA_PLL1, PLL_DIV2 }, + [4] = { CLKSEL_VALID, CGA_PLL2, PLL_DIV1 }, + [5] = { CLKSEL_VALID, CGA_PLL2, PLL_DIV2 }, + } +}; + +static const struct clockgen_muxinfo clockgen2_cmux_cga12 = { + { + { CLKSEL_VALID, CGA_PLL1, PLL_DIV1 }, + { CLKSEL_VALID, CGA_PLL1, PLL_DIV2 }, + { CLKSEL_VALID, CGA_PLL1, PLL_DIV4 }, + {}, + { CLKSEL_VALID, CGA_PLL2, PLL_DIV1 }, + { CLKSEL_VALID, CGA_PLL2, PLL_DIV2 }, + { CLKSEL_VALID, CGA_PLL2, PLL_DIV4 }, + }, +}; + +static const struct clockgen_muxinfo clockgen2_cmux_cgb = { + { + { CLKSEL_VALID, CGB_PLL1, PLL_DIV1 }, + { CLKSEL_VALID, CGB_PLL1, PLL_DIV2 }, + { CLKSEL_VALID, CGB_PLL1, PLL_DIV4 }, + {}, + { CLKSEL_VALID, CGB_PLL2, PLL_DIV1 }, + { CLKSEL_VALID, CGB_PLL2, PLL_DIV2 }, + { CLKSEL_VALID, CGB_PLL2, PLL_DIV4 }, + }, +}; + +static const struct clockgen_muxinfo ls1043a_hwa1 = { + { + {}, + {}, + { CLKSEL_VALID, CGA_PLL1, PLL_DIV2 }, + { CLKSEL_VALID, CGA_PLL1, PLL_DIV3 }, + {}, + {}, + { CLKSEL_VALID, CGA_PLL2, PLL_DIV2 }, + { CLKSEL_VALID, CGA_PLL2, PLL_DIV3 }, + }, +}; + +static const struct clockgen_muxinfo ls1043a_hwa2 = { + { + {}, + { CLKSEL_VALID, CGA_PLL2, PLL_DIV1 }, + {}, + { CLKSEL_VALID, CGA_PLL2, PLL_DIV3 }, + }, +}; + +static const struct clockgen_muxinfo ls1046a_hwa1 = { + { + {}, + {}, + { CLKSEL_VALID, CGA_PLL1, PLL_DIV2 }, + { CLKSEL_VALID, CGA_PLL1, PLL_DIV3 }, + { CLKSEL_VALID, CGA_PLL1, PLL_DIV4 }, + { CLKSEL_VALID, PLATFORM_PLL, PLL_DIV1 }, + { CLKSEL_VALID, CGA_PLL2, PLL_DIV2 }, + { CLKSEL_VALID, CGA_PLL2, PLL_DIV3 }, + }, +}; + +static const struct clockgen_muxinfo ls1046a_hwa2 = { + { + {}, + { CLKSEL_VALID, CGA_PLL2, PLL_DIV1 }, + { CLKSEL_VALID, CGA_PLL2, PLL_DIV2 }, + { CLKSEL_VALID, CGA_PLL2, PLL_DIV3 }, + {}, + {}, + { CLKSEL_VALID, CGA_PLL1, PLL_DIV2 }, + }, +}; + +static const struct clockgen_muxinfo ls1012a_cmux = { + { + [0] = { CLKSEL_VALID, CGA_PLL1, PLL_DIV1 }, + {}, + [2] = { CLKSEL_VALID, CGA_PLL1, PLL_DIV2 }, + } +}; + +static void __init t2080_init_periph(struct clockgen *cg) +{ + cg->fman[0] = cg->hwaccel[0]; +} + +static const struct clockgen_chipinfo chipinfo_ls1021a = { + .compat = "fsl,ls1021a-clockgen", + .cmux_groups = { &t1023_cmux }, + .cmux_to_group = { 0, -1 }, + .pll_mask = 0x03, +}; + +static const struct clockgen_chipinfo chipinfo_ls1043a = { + .compat = "fsl,ls1043a-clockgen", + .init_periph = t2080_init_periph, + .cmux_groups = { &t1040_cmux }, + .hwaccel = { &ls1043a_hwa1, &ls1043a_hwa2 }, + .cmux_to_group = { 0, -1 }, + .pll_mask = 0x07, + .flags = CG_PLL_8BIT, +}; + +static const struct clockgen_chipinfo chipinfo_ls1046a = { + .compat = "fsl,ls1046a-clockgen", + .init_periph = t2080_init_periph, + .cmux_groups = { &t1040_cmux }, + .hwaccel = { &ls1046a_hwa1, &ls1046a_hwa2 }, + .cmux_to_group = { 0, -1 }, + .pll_mask = 0x07, + .flags = CG_PLL_8BIT, +}; + +static const struct clockgen_chipinfo chipinfo_ls1088a = { + .compat = "fsl,ls1088a-clockgen", + .cmux_groups = { &clockgen2_cmux_cga12 }, + .cmux_to_group = { 0, 0, -1 }, + .pll_mask = 0x07, + .flags = CG_VER3 | CG_LITTLE_ENDIAN, +}; + +static const struct clockgen_chipinfo chipinfo_ls1012a = { + .compat = "fsl,ls1012a-clockgen", + .cmux_groups = { &ls1012a_cmux }, + .cmux_to_group = { 0, -1 }, + .pll_mask = 0x03, +}; + +static const struct clockgen_chipinfo chipinfo_ls2080a = { + .compat = "fsl,ls2080a-clockgen", + .cmux_groups = { &clockgen2_cmux_cga12, &clockgen2_cmux_cgb }, + .cmux_to_group = { 0, 0, 1, 1, -1 }, + .pll_mask = 0x37, + .flags = CG_VER3 | CG_LITTLE_ENDIAN, +}; + +struct mux_hwclock { + struct clk clk; + struct clockgen *cg; + const struct clockgen_muxinfo *info; + u32 __iomem *reg; + int num_parents; +}; + +#define to_mux_hwclock(p) container_of(p, struct mux_hwclock, clk) +#define CLKSEL_MASK 0x78000000 +#define CLKSEL_SHIFT 27 + +static int mux_set_parent(struct clk *clk, u8 idx) +{ + struct mux_hwclock *hwc = to_mux_hwclock(clk); + + if (idx >= hwc->num_parents) + return -EINVAL; + + cg_out(hwc->cg, (idx << CLKSEL_SHIFT) & CLKSEL_MASK, hwc->reg); + + return 0; +} + +static int mux_get_parent(struct clk *clk) +{ + struct mux_hwclock *hwc = to_mux_hwclock(clk); + + return (cg_in(hwc->cg, hwc->reg) & CLKSEL_MASK) >> CLKSEL_SHIFT; +} + +static const struct clk_ops cmux_ops = { + .get_parent = mux_get_parent, + .set_parent = mux_set_parent, +}; + +/* + * Don't allow setting for now, as the clock options haven't been + * sanitized for additional restrictions. + */ +static const struct clk_ops hwaccel_ops = { + .get_parent = mux_get_parent, +}; + +static const struct clockgen_pll_div *get_pll_div(struct clockgen *cg, + struct mux_hwclock *hwc, + int idx) +{ + const struct clockgen_sourceinfo *clksel = &hwc->info->clksel[idx]; + int pll, div; + + if (!(clksel->flags & CLKSEL_VALID)) + return NULL; + + pll = clksel->pll; + div = clksel->div; + + return &cg->pll[pll].div[div]; +} + +static struct clk * __init create_mux_common(struct clockgen *cg, + struct mux_hwclock *hwc, + const struct clk_ops *ops, + const char *fmt, int idx) +{ + struct clk *clk = &hwc->clk; + const struct clockgen_pll_div *div; + const char **parent_names; + int i, ret; + + parent_names = xzalloc(sizeof(char *) * NUM_MUX_PARENTS); + + for (i = 0; i < NUM_MUX_PARENTS; i++) { + div = get_pll_div(cg, hwc, i); + if (!div) + continue; + + parent_names[i] = div->name; + } + + clk->name = xasprintf(fmt, idx);; + clk->ops = ops; + clk->parent_names = parent_names; + clk->num_parents = hwc->num_parents = i; + hwc->cg = cg; + + ret = clk_register(clk); + if (ret) { + pr_err("%s: Couldn't register %s: %d\n", __func__, clk->name, ret); + kfree(hwc); + return NULL; + } + + return clk; +} + +static struct clk * __init create_one_cmux(struct clockgen *cg, int idx) +{ + struct mux_hwclock *hwc; + const struct clockgen_pll_div *div; + u32 clksel; + + hwc = xzalloc(sizeof(*hwc)); + + if (cg->info.flags & CG_VER3) + hwc->reg = cg->regs + 0x70000 + 0x20 * idx; + else + hwc->reg = cg->regs + 0x20 * idx; + + hwc->info = cg->info.cmux_groups[cg->info.cmux_to_group[idx]]; + + /* + * Find the rate for the default clksel, and treat it as the + * maximum rated core frequency. If this is an incorrect + * assumption, certain clock options (possibly including the + * default clksel) may be inappropriately excluded on certain + * chips. + */ + clksel = (cg_in(cg, hwc->reg) & CLKSEL_MASK) >> CLKSEL_SHIFT; + div = get_pll_div(cg, hwc, clksel); + if (!div) { + kfree(hwc); + return NULL; + } + + return create_mux_common(cg, hwc, &cmux_ops, "cg-cmux%d", idx); +} + +static struct clk * __init create_one_hwaccel(struct clockgen *cg, int idx) +{ + struct mux_hwclock *hwc; + + hwc = xzalloc(sizeof(*hwc)); + + hwc->reg = cg->regs + 0x20 * idx + 0x10; + hwc->info = cg->info.hwaccel[idx]; + + return create_mux_common(cg, hwc, &hwaccel_ops, "cg-hwaccel%d", idx); +} + +static void __init create_muxes(struct clockgen *cg) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(cg->cmux); i++) { + if (cg->info.cmux_to_group[i] < 0) + break; + if (cg->info.cmux_to_group[i] >= + ARRAY_SIZE(cg->info.cmux_groups)) { + continue; + } + + cg->cmux[i] = create_one_cmux(cg, i); + } + + for (i = 0; i < ARRAY_SIZE(cg->hwaccel); i++) { + if (!cg->info.hwaccel[i]) + continue; + + cg->hwaccel[i] = create_one_hwaccel(cg, i); + } +} + +#define PLL_KILL BIT(31) + +static void __init create_one_pll(struct clockgen *cg, int idx) +{ + u32 __iomem *reg; + u32 mult; + struct clockgen_pll *pll = &cg->pll[idx]; + const char *input = cg->sysclk->name; + int i; + + if (!(cg->info.pll_mask & (1 << idx))) + return; + + if (cg->coreclk && idx != PLATFORM_PLL) { + if (IS_ERR(cg->coreclk)) + return; + + input = cg->coreclk->name; + } + + if (cg->info.flags & CG_VER3) { + switch (idx) { + case PLATFORM_PLL: + reg = cg->regs + 0x60080; + break; + case CGA_PLL1: + reg = cg->regs + 0x80; + break; + case CGA_PLL2: + reg = cg->regs + 0xa0; + break; + case CGB_PLL1: + reg = cg->regs + 0x10080; + break; + case CGB_PLL2: + reg = cg->regs + 0x100a0; + break; + default: + pr_warn("index %d\n", idx); + return; + } + } else { + if (idx == PLATFORM_PLL) + reg = cg->regs + 0xc00; + else + reg = cg->regs + 0x800 + 0x20 * (idx - 1); + } + + /* Get the multiple of PLL */ + mult = cg_in(cg, reg); + + /* Check if this PLL is disabled */ + if (mult & PLL_KILL) { + pr_debug("%s(): pll %p disabled\n", __func__, reg); + return; + } + + if ((cg->info.flags & CG_VER3) || + ((cg->info.flags & CG_PLL_8BIT) && idx != PLATFORM_PLL)) + mult = (mult & GENMASK(8, 1)) >> 1; + else + mult = (mult & GENMASK(6, 1)) >> 1; + + for (i = 0; i < ARRAY_SIZE(pll->div); i++) { + struct clk *clk; + + /* + * For platform PLL, there are 8 divider clocks. + * For core PLL, there are 4 divider clocks at most. + */ + if (idx != PLATFORM_PLL && i >= 4) + break; + + snprintf(pll->div[i].name, sizeof(pll->div[i].name), + "cg-pll%d-div%d", idx, i + 1); + + clk = clk_fixed_factor(pll->div[i].name, input, mult, i + 1, 0); + if (IS_ERR(clk)) { + pr_err("%s: %s: register failed %ld\n", + __func__, pll->div[i].name, PTR_ERR(clk)); + continue; + } + + pll->div[i].clk = clk; + } +} + +static void __init create_plls(struct clockgen *cg) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(cg->pll); i++) + create_one_pll(cg, i); +} + +static struct clk *clockgen_clk_get(struct of_phandle_args *clkspec, void *data) +{ + struct clockgen *cg = data; + struct clk *clk; + struct clockgen_pll *pll; + u32 type, idx; + + if (clkspec->args_count < 2) { + pr_err("%s: insufficient phandle args\n", __func__); + return ERR_PTR(-EINVAL); + } + + type = clkspec->args[0]; + idx = clkspec->args[1]; + + switch (type) { + case 0: + if (idx != 0) + goto bad_args; + clk = cg->sysclk; + break; + case 1: + if (idx >= ARRAY_SIZE(cg->cmux)) + goto bad_args; + clk = cg->cmux[idx]; + break; + case 2: + if (idx >= ARRAY_SIZE(cg->hwaccel)) + goto bad_args; + clk = cg->hwaccel[idx]; + break; + case 3: + if (idx >= ARRAY_SIZE(cg->fman)) + goto bad_args; + clk = cg->fman[idx]; + break; + case 4: + pll = &cg->pll[PLATFORM_PLL]; + if (idx >= ARRAY_SIZE(pll->div)) + goto bad_args; + clk = pll->div[idx].clk; + break; + case 5: + if (idx != 0) + goto bad_args; + clk = cg->coreclk; + if (IS_ERR(clk)) + clk = NULL; + break; + default: + goto bad_args; + } + + if (!clk) + return ERR_PTR(-ENOENT); + return clk; + +bad_args: + pr_err("%s: Bad phandle args %u %u\n", __func__, type, idx); + return ERR_PTR(-EINVAL); +} + +static void __init clockgen_init(struct device_node *np, + const struct clockgen_chipinfo *chipinfo) +{ + int ret; + + clockgen.node = np; + clockgen.regs = of_iomap(np, 0); + if (!clockgen.regs) { + pr_err("of_iomap failed for %s\n", np->full_name); + return; + } + + clockgen.info = *chipinfo; + + clockgen.sysclk = of_clk_get(clockgen.node, 0); + if (IS_ERR(clockgen.sysclk)) { + pr_err("sysclk not found: %s\n", strerrorp(clockgen.sysclk)); + return; + } + + clockgen.coreclk = of_clk_get(clockgen.node, 1); + if (IS_ERR(clockgen.coreclk)) + clockgen.coreclk = NULL; + + create_plls(&clockgen); + create_muxes(&clockgen); + + if (clockgen.info.init_periph) + clockgen.info.init_periph(&clockgen); + + ret = of_clk_add_provider(np, clockgen_clk_get, &clockgen); + if (ret) { + pr_err("Couldn't register clk provider for node %s: %d\n", + np->full_name, ret); + } + + return; +} + +static void __maybe_unused clockgen_init_ls1012a(struct device_node *np) +{ + clockgen_init(np, &chipinfo_ls1012a); +} + +static void __maybe_unused clockgen_init_ls1021a(struct device_node *np) +{ + clockgen_init(np, &chipinfo_ls1021a); +} + +static void __maybe_unused clockgen_init_ls1043a(struct device_node *np) +{ + clockgen_init(np, &chipinfo_ls1043a); +} + +static void __maybe_unused clockgen_init_ls1046a(struct device_node *np) +{ + clockgen_init(np, &chipinfo_ls1046a); +} + +static void __maybe_unused clockgen_init_ls1088a(struct device_node *np) +{ + clockgen_init(np, &chipinfo_ls1088a); +} + +static void __maybe_unused clockgen_init_ls2080a(struct device_node *np) +{ + clockgen_init(np, &chipinfo_ls2080a); +} + +#ifdef CONFIG_ARCH_LS1012 +CLK_OF_DECLARE(qoriq_clockgen_ls1012a, "fsl,ls1012a-clockgen", clockgen_init_ls1012a); +#endif +#ifdef CONFIG_ARCH_LS1021 +CLK_OF_DECLARE(qoriq_clockgen_ls1021a, "fsl,ls1021a-clockgen", clockgen_init_ls1021a); +#endif +#ifdef CONFIG_ARCH_LS1043 +CLK_OF_DECLARE(qoriq_clockgen_ls1043a, "fsl,ls1043a-clockgen", clockgen_init_ls1043a); +#endif +#ifdef CONFIG_ARCH_LS1046 +CLK_OF_DECLARE(qoriq_clockgen_ls1046a, "fsl,ls1046a-clockgen", clockgen_init_ls1046a); +#endif +#ifdef CONFIG_ARCH_LS1088 +CLK_OF_DECLARE(qoriq_clockgen_ls1088a, "fsl,ls1088a-clockgen", clockgen_init_ls1088a); +#endif +#ifdef CONFIG_ARCH_LS2080 +CLK_OF_DECLARE(qoriq_clockgen_ls2080a, "fsl,ls2080a-clockgen", clockgen_init_ls2080a); +#endif diff --git a/drivers/clk/clk-stm32mp1.c b/drivers/clk/clk-stm32mp1.c new file mode 100644 index 0000000000..6016c5bfd0 --- /dev/null +++ b/drivers/clk/clk-stm32mp1.c @@ -0,0 +1,1988 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) STMicroelectronics 2018 - All Rights Reserved + * Author: Olivier Bideau <olivier.bideau@st.com> for STMicroelectronics. + * Author: Gabriel Fernandez <gabriel.fernandez@st.com> for STMicroelectronics. + */ + +#include <linux/clk.h> +#include <linux/err.h> +#include <io.h> +#include <of.h> +#include <of_address.h> +#include <asm-generic/div64.h> + +#include <dt-bindings/clock/stm32mp1-clks.h> + +#define RCC_OCENSETR 0x0C +#define RCC_HSICFGR 0x18 +#define RCC_RDLSICR 0x144 +#define RCC_PLL1CR 0x80 +#define RCC_PLL1CFGR1 0x84 +#define RCC_PLL1CFGR2 0x88 +#define RCC_PLL2CR 0x94 +#define RCC_PLL2CFGR1 0x98 +#define RCC_PLL2CFGR2 0x9C +#define RCC_PLL3CR 0x880 +#define RCC_PLL3CFGR1 0x884 +#define RCC_PLL3CFGR2 0x888 +#define RCC_PLL4CR 0x894 +#define RCC_PLL4CFGR1 0x898 +#define RCC_PLL4CFGR2 0x89C +#define RCC_APB1ENSETR 0xA00 +#define RCC_APB2ENSETR 0xA08 +#define RCC_APB3ENSETR 0xA10 +#define RCC_APB4ENSETR 0x200 +#define RCC_APB5ENSETR 0x208 +#define RCC_AHB2ENSETR 0xA18 +#define RCC_AHB3ENSETR 0xA20 +#define RCC_AHB4ENSETR 0xA28 +#define RCC_AHB5ENSETR 0x210 +#define RCC_AHB6ENSETR 0x218 +#define RCC_AHB6LPENSETR 0x318 +#define RCC_RCK12SELR 0x28 +#define RCC_RCK3SELR 0x820 +#define RCC_RCK4SELR 0x824 +#define RCC_MPCKSELR 0x20 +#define RCC_ASSCKSELR 0x24 +#define RCC_MSSCKSELR 0x48 +#define RCC_SPI6CKSELR 0xC4 +#define RCC_SDMMC12CKSELR 0x8F4 +#define RCC_SDMMC3CKSELR 0x8F8 +#define RCC_FMCCKSELR 0x904 +#define RCC_I2C46CKSELR 0xC0 +#define RCC_I2C12CKSELR 0x8C0 +#define RCC_I2C35CKSELR 0x8C4 +#define RCC_UART1CKSELR 0xC8 +#define RCC_QSPICKSELR 0x900 +#define RCC_ETHCKSELR 0x8FC +#define RCC_RNG1CKSELR 0xCC +#define RCC_RNG2CKSELR 0x920 +#define RCC_GPUCKSELR 0x938 +#define RCC_USBCKSELR 0x91C +#define RCC_STGENCKSELR 0xD4 +#define RCC_SPDIFCKSELR 0x914 +#define RCC_SPI2S1CKSELR 0x8D8 +#define RCC_SPI2S23CKSELR 0x8DC +#define RCC_SPI2S45CKSELR 0x8E0 +#define RCC_CECCKSELR 0x918 +#define RCC_LPTIM1CKSELR 0x934 +#define RCC_LPTIM23CKSELR 0x930 +#define RCC_LPTIM45CKSELR 0x92C +#define RCC_UART24CKSELR 0x8E8 +#define RCC_UART35CKSELR 0x8EC +#define RCC_UART6CKSELR 0x8E4 +#define RCC_UART78CKSELR 0x8F0 +#define RCC_FDCANCKSELR 0x90C +#define RCC_SAI1CKSELR 0x8C8 +#define RCC_SAI2CKSELR 0x8CC +#define RCC_SAI3CKSELR 0x8D0 +#define RCC_SAI4CKSELR 0x8D4 +#define RCC_ADCCKSELR 0x928 +#define RCC_MPCKDIVR 0x2C +#define RCC_DSICKSELR 0x924 +#define RCC_CPERCKSELR 0xD0 +#define RCC_MCO1CFGR 0x800 +#define RCC_MCO2CFGR 0x804 +#define RCC_BDCR 0x140 +#define RCC_AXIDIVR 0x30 +#define RCC_MCUDIVR 0x830 +#define RCC_APB1DIVR 0x834 +#define RCC_APB2DIVR 0x838 +#define RCC_APB3DIVR 0x83C +#define RCC_APB4DIVR 0x3C +#define RCC_APB5DIVR 0x40 +#define RCC_TIMG1PRER 0x828 +#define RCC_TIMG2PRER 0x82C +#define RCC_RTCDIVR 0x44 +#define RCC_DBGCFGR 0x80C + +#define RCC_CLR 0x4 + +static const char * const ref12_parents[] = { + "ck_hsi", "ck_hse" +}; + +static const char * const ref3_parents[] = { + "ck_hsi", "ck_hse", "ck_csi" +}; + +static const char * const ref4_parents[] = { + "ck_hsi", "ck_hse", "ck_csi" +}; + +static const char * const cpu_src[] = { + "ck_hsi", "ck_hse", "pll1_p" +}; + +static const char * const axi_src[] = { + "ck_hsi", "ck_hse", "pll2_p", "pll3_p" +}; + +static const char * const per_src[] = { + "ck_hsi", "ck_csi", "ck_hse" +}; + +static const char * const mcu_src[] = { + "ck_hsi", "ck_hse", "ck_csi", "pll3_p" +}; + +static const char * const sdmmc12_src[] = { + "ck_axi", "pll3_r", "pll4_p", "ck_hsi" +}; + +static const char * const sdmmc3_src[] = { + "ck_mcu", "pll3_r", "pll4_p", "ck_hsi" +}; + +static const char * const fmc_src[] = { + "ck_axi", "pll3_r", "pll4_p", "ck_per" +}; + +static const char * const qspi_src[] = { + "ck_axi", "pll3_r", "pll4_p", "ck_per" +}; + +static const char * const eth_src[] = { + "pll4_p", "pll3_q" +}; + +static const char * const rng_src[] = { + "ck_csi", "pll4_r", "ck_lse", "ck_lsi" +}; + +static const char * const usbphy_src[] = { + "ck_hse", "pll4_r", "clk-hse-div2" +}; + +static const char * const usbo_src[] = { + "pll4_r", "ck_usbo_48m" +}; + +static const char * const stgen_src[] = { + "ck_hsi", "ck_hse" +}; + +static const char * const spdif_src[] = { + "pll4_p", "pll3_q", "ck_hsi" +}; + +static const char * const spi123_src[] = { + "pll4_p", "pll3_q", "i2s_ckin", "ck_per", "pll3_r" +}; + +static const char * const spi45_src[] = { + "pclk2", "pll4_q", "ck_hsi", "ck_csi", "ck_hse" +}; + +static const char * const spi6_src[] = { + "pclk5", "pll4_q", "ck_hsi", "ck_csi", "ck_hse", "pll3_q" +}; + +static const char * const cec_src[] = { + "ck_lse", "ck_lsi", "ck_csi" +}; + +static const char * const i2c12_src[] = { + "pclk1", "pll4_r", "ck_hsi", "ck_csi" +}; + +static const char * const i2c35_src[] = { + "pclk1", "pll4_r", "ck_hsi", "ck_csi" +}; + +static const char * const i2c46_src[] = { + "pclk5", "pll3_q", "ck_hsi", "ck_csi" +}; + +static const char * const lptim1_src[] = { + "pclk1", "pll4_p", "pll3_q", "ck_lse", "ck_lsi", "ck_per" +}; + +static const char * const lptim23_src[] = { + "pclk3", "pll4_q", "ck_per", "ck_lse", "ck_lsi" +}; + +static const char * const lptim45_src[] = { + "pclk3", "pll4_p", "pll3_q", "ck_lse", "ck_lsi", "ck_per" +}; + +static const char * const usart1_src[] = { + "pclk5", "pll3_q", "ck_hsi", "ck_csi", "pll4_q", "ck_hse" +}; + +static const char * const usart234578_src[] = { + "pclk1", "pll4_q", "ck_hsi", "ck_csi", "ck_hse" +}; + +static const char * const usart6_src[] = { + "pclk2", "pll4_q", "ck_hsi", "ck_csi", "ck_hse" +}; + +static const char * const fdcan_src[] = { + "ck_hse", "pll3_q", "pll4_q" +}; + +static const char * const sai_src[] = { + "pll4_q", "pll3_q", "i2s_ckin", "ck_per" +}; + +static const char * const sai2_src[] = { + "pll4_q", "pll3_q", "i2s_ckin", "ck_per", "spdif_ck_symb" +}; + +static const char * const adc12_src[] = { + "pll4_q", "ck_per" +}; + +static const char * const dsi_src[] = { + "ck_dsi_phy", "pll4_p" +}; + +static const char * const rtc_src[] = { + "off", "ck_lse", "ck_lsi", "ck_hse_rtc" +}; + +static const char * const mco1_src[] = { + "ck_hsi", "ck_hse", "ck_csi", "ck_lsi", "ck_lse" +}; + +static const char * const mco2_src[] = { + "ck_mpu", "ck_axi", "ck_mcu", "pll4_p", "ck_hse", "ck_hsi" +}; + +static const char * const ck_trace_src[] = { + "ck_axi" +}; + +static const struct clk_div_table axi_div_table[] = { + { 0, 1 }, { 1, 2 }, { 2, 3 }, { 3, 4 }, + { 4, 4 }, { 5, 4 }, { 6, 4 }, { 7, 4 }, + { 0 }, +}; + +static const struct clk_div_table mcu_div_table[] = { + { 0, 1 }, { 1, 2 }, { 2, 4 }, { 3, 8 }, + { 4, 16 }, { 5, 32 }, { 6, 64 }, { 7, 128 }, + { 8, 512 }, { 9, 512 }, { 10, 512}, { 11, 512 }, + { 12, 512 }, { 13, 512 }, { 14, 512}, { 15, 512 }, + { 0 }, +}; + +static const struct clk_div_table apb_div_table[] = { + { 0, 1 }, { 1, 2 }, { 2, 4 }, { 3, 8 }, + { 4, 16 }, { 5, 16 }, { 6, 16 }, { 7, 16 }, + { 0 }, +}; + +static const struct clk_div_table ck_trace_div_table[] = { + { 0, 1 }, { 1, 2 }, { 2, 4 }, { 3, 8 }, + { 4, 16 }, { 5, 16 }, { 6, 16 }, { 7, 16 }, + { 0 }, +}; + +#define MAX_MUX_CLK 2 + +struct stm32_mmux { + u8 nbr_clk; + struct clk *hws[MAX_MUX_CLK]; +}; + +struct stm32_clk_mmux { + struct clk_mux mux; + struct stm32_mmux *mmux; +}; + +struct stm32_mgate { + u8 nbr_clk; + u32 flag; +}; + +struct stm32_clk_mgate { + struct clk_gate gate; + struct stm32_mgate *mgate; + u32 mask; +}; + +struct clock_config { + u32 id; + const char *name; + const char *parent_name; + const char * const *parent_names; + int num_parents; + unsigned long flags; + void *cfg; + struct clk * (*func)(void __iomem *base, const struct clock_config *cfg); +}; + +#define NO_ID ~0 + +struct gate_cfg { + u32 reg_off; + u8 bit_idx; + u8 gate_flags; +}; + +struct fixed_factor_cfg { + unsigned int mult; + unsigned int div; +}; + +struct div_cfg { + u32 reg_off; + u8 shift; + u8 width; + u8 div_flags; + const struct clk_div_table *table; +}; + +struct mux_cfg { + u32 reg_off; + u8 shift; + u8 width; + u8 mux_flags; + u32 *table; +}; + +struct stm32_gate_cfg { + struct gate_cfg *gate; + struct stm32_mgate *mgate; + const struct clk_ops *ops; +}; + +struct stm32_div_cfg { + struct div_cfg *div; + const struct clk_ops *ops; +}; + +struct stm32_mux_cfg { + struct mux_cfg *mux; + struct stm32_mmux *mmux; + const struct clk_ops *ops; +}; + +/* STM32 Composite clock */ +struct stm32_composite_cfg { + const struct stm32_gate_cfg *gate; + const struct stm32_div_cfg *div; + const struct stm32_mux_cfg *mux; +}; + +static struct clk * +_clk_hw_register_gate(void __iomem *base, + const struct clock_config *cfg) +{ + struct gate_cfg *gate_cfg = cfg->cfg; + + return clk_gate(cfg->name, cfg->parent_name, gate_cfg->reg_off + base, + gate_cfg->bit_idx, cfg->flags, gate_cfg->gate_flags); +} + +static struct clk * +_clk_hw_register_fixed_factor(void __iomem *base, + const struct clock_config *cfg) +{ + struct fixed_factor_cfg *ff_cfg = cfg->cfg; + + return clk_fixed_factor(cfg->name, cfg->parent_name, ff_cfg->mult, + ff_cfg->div, cfg->flags); +} + +static struct clk * +_clk_hw_register_divider_table(void __iomem *base, + const struct clock_config *cfg) +{ + + struct div_cfg *div_cfg = cfg->cfg; + + if (div_cfg->table) + return clk_divider_table(cfg->name, cfg->parent_name, cfg->flags, + div_cfg->reg_off + base, div_cfg->shift, + div_cfg->width, div_cfg->table, + div_cfg->div_flags); + else + return clk_divider(cfg->name, cfg->parent_name, cfg->flags, + div_cfg->reg_off + base, div_cfg->shift, + div_cfg->width, div_cfg->div_flags); +} + +static struct clk * +_clk_hw_register_mux(void __iomem *base, + const struct clock_config *cfg) +{ + struct mux_cfg *mux_cfg = cfg->cfg; + + return clk_mux(cfg->name,cfg->flags, mux_cfg->reg_off + base, mux_cfg->shift, + mux_cfg->width, cfg->parent_names, cfg->num_parents, + mux_cfg->mux_flags); +} + +/* MP1 Gate clock with set & clear registers */ + +static int mp1_gate_clk_enable(struct clk *clk) +{ + if (!clk_gate_ops.is_enabled(clk)) + clk_gate_ops.enable(clk); + + return 0; +} + +static void mp1_gate_clk_disable(struct clk *clk) +{ + struct clk_gate *gate = to_clk_gate(clk); + + if (clk_gate_ops.is_enabled(clk)) { + writel(BIT(gate->shift), gate->reg + RCC_CLR); + } +} + +static const struct clk_ops mp1_gate_clk_ops = { + .enable = mp1_gate_clk_enable, + .disable = mp1_gate_clk_disable, + .is_enabled = clk_gate_is_enabled, +}; + +static struct clk *_get_stm32_mux(void __iomem *base, + const struct stm32_mux_cfg *cfg) +{ + struct stm32_clk_mmux *mmux; + struct clk_mux *mux; + struct clk *mux_hw; + + if (cfg->mmux) { + mmux = kzalloc(sizeof(*mmux), GFP_KERNEL); + if (!mmux) + return ERR_PTR(-ENOMEM); + + mmux->mux.reg = cfg->mux->reg_off + base; + mmux->mux.shift = cfg->mux->shift; + mmux->mux.width = cfg->mux->width; + mmux->mmux = cfg->mmux; + mux_hw = &mmux->mux.clk; + cfg->mmux->hws[cfg->mmux->nbr_clk++] = mux_hw; + mux = &mmux->mux; + } else { + mux = kzalloc(sizeof(*mux), GFP_KERNEL); + if (!mux) + return ERR_PTR(-ENOMEM); + + mux->reg = cfg->mux->reg_off + base; + mux->shift = cfg->mux->shift; + mux->width = cfg->mux->width; + mux_hw = &mux->clk; + } + + if (cfg->ops) + mux->clk.ops = cfg->ops; + else + mux->clk.ops = &clk_mux_ops; + + return mux_hw; +} + +static struct clk *_get_stm32_div(void __iomem *base, + const struct stm32_div_cfg *cfg) +{ + struct clk_divider *div; + + div = kzalloc(sizeof(*div), GFP_KERNEL); + if (!div) + return ERR_PTR(-ENOMEM); + + div->reg = cfg->div->reg_off + base; + div->shift = cfg->div->shift; + div->width = cfg->div->width; + div->flags = cfg->div->div_flags; + div->table = cfg->div->table; + + if (cfg->ops) + div->clk.ops = cfg->ops; + else + div->clk.ops = &clk_divider_ops; + + return &div->clk; +} + +static struct clk_gate * +_get_stm32_gate(void __iomem *base, + const struct stm32_gate_cfg *cfg) +{ + struct stm32_clk_mgate *mgate; + struct clk_gate *gate; + + if (cfg->mgate) { + mgate = kzalloc(sizeof(*mgate), GFP_KERNEL); + if (!mgate) + return ERR_PTR(-ENOMEM); + + mgate->gate.reg = cfg->gate->reg_off + base; + mgate->gate.shift = cfg->gate->bit_idx; + mgate->gate.flags = cfg->gate->gate_flags; + mgate->mask = BIT(cfg->mgate->nbr_clk++); + + mgate->mgate = cfg->mgate; + + gate = &mgate->gate; + + } else { + gate = kzalloc(sizeof(*gate), GFP_KERNEL); + if (!gate) + return ERR_PTR(-ENOMEM); + + gate->reg = cfg->gate->reg_off + base; + gate->shift = cfg->gate->bit_idx; + gate->flags = cfg->gate->gate_flags; + } + + if (cfg->ops) + gate->clk.ops = cfg->ops; + else + gate->clk.ops = &clk_gate_ops; + + return gate; +} + +static struct clk * +clk_stm32_register_gate_ops(const char *name, + const char *parent_name, + unsigned long flags, + void __iomem *base, + const struct stm32_gate_cfg *cfg) +{ + struct clk *clk; + struct clk_gate *gate; + int ret; + + gate = _get_stm32_gate(base, cfg); + if (IS_ERR(gate)) + return ERR_PTR(-ENOMEM); + + gate->parent = parent_name; + clk = &gate->clk; + clk->name = name; + clk->parent_names = &gate->parent; + clk->num_parents = 1; + clk->flags = flags; + + ret = clk_register(clk); + if (ret) + clk = ERR_PTR(ret); + + return clk; +} + +static struct clk * +clk_stm32_register_composite(const char *name, const char * const *parent_names, + int num_parents, void __iomem *base, + const struct stm32_composite_cfg *cfg, + unsigned long flags) +{ + struct clk *mux_hw, *div_hw, *gate_hw; + struct clk_gate *gate; + + mux_hw = NULL; + div_hw = NULL; + gate_hw = NULL; + + if (cfg->mux) + mux_hw = _get_stm32_mux(base, cfg->mux); + + if (cfg->div) + div_hw = _get_stm32_div(base, cfg->div); + + if (cfg->gate) { + gate = _get_stm32_gate(base, cfg->gate); + gate_hw = &gate->clk; + } + + return clk_register_composite(name, parent_names, num_parents, + mux_hw, div_hw, gate_hw, flags); +} + +#define to_clk_mgate(_gate) container_of(_gate, struct stm32_clk_mgate, gate) + +static int mp1_mgate_clk_enable(struct clk *clk) +{ + struct clk_gate *gate = to_clk_gate(clk); + struct stm32_clk_mgate *clk_mgate = to_clk_mgate(gate); + + clk_mgate->mgate->flag |= clk_mgate->mask; + + mp1_gate_clk_enable(clk); + + return 0; +} + +static void mp1_mgate_clk_disable(struct clk *clk) +{ + struct clk_gate *gate = to_clk_gate(clk); + struct stm32_clk_mgate *clk_mgate = to_clk_mgate(gate); + + clk_mgate->mgate->flag &= ~clk_mgate->mask; + + if (clk_mgate->mgate->flag == 0) + mp1_gate_clk_disable(clk); +} + +static const struct clk_ops mp1_mgate_clk_ops = { + .enable = mp1_mgate_clk_enable, + .disable = mp1_mgate_clk_disable, + .is_enabled = clk_gate_is_enabled, + +}; + +#define to_clk_mmux(_mux) container_of(_mux, struct stm32_clk_mmux, mux) + +static int clk_mmux_get_parent(struct clk *clk) +{ + return clk_mux_ops.get_parent(clk); +} + +static int clk_mmux_set_parent(struct clk *clk, u8 index) +{ + struct clk_mux *mux = to_clk_mux(clk); + struct stm32_clk_mmux *clk_mmux = to_clk_mmux(mux); + struct clk *parent; + int ret, n; + + ret = clk_mux_ops.set_parent(clk, index); + if (ret) + return ret; + + parent = clk_get_parent(clk); + + for (n = 0; n < clk_mmux->mmux->nbr_clk; n++) + clk_set_parent(clk_mmux->mmux->hws[n], parent); + + return 0; +} + +static const struct clk_ops clk_mmux_ops = { + .get_parent = clk_mmux_get_parent, + .set_parent = clk_mmux_set_parent, +}; + +/* STM32 PLL */ +struct stm32_pll_obj { + void __iomem *reg; + const char *parent; + struct clk clk; +}; + +#define to_pll(clk) container_of(clk, struct stm32_pll_obj, clk) + +#define PLL_ON BIT(0) +#define PLL_RDY BIT(1) +#define DIVN_MASK 0x1FF +#define DIVM_MASK 0x3F +#define DIVM_SHIFT 16 +#define DIVN_SHIFT 0 +#define FRAC_OFFSET 0xC +#define FRAC_MASK 0x1FFF +#define FRAC_SHIFT 3 +#define FRACLE BIT(16) + +static int __pll_is_enabled(struct clk *clk) +{ + struct stm32_pll_obj *clk_elem = to_pll(clk); + + return readl(clk_elem->reg) & PLL_ON; +} + +#define TIMEOUT 5 + +static int pll_enable(struct clk *clk) +{ + struct stm32_pll_obj *clk_elem = to_pll(clk); + u32 reg; + unsigned int timeout = TIMEOUT; + int bit_status = 0; + + if (__pll_is_enabled(clk)) + goto unlock; + + reg = readl(clk_elem->reg); + reg |= PLL_ON; + writel(reg, clk_elem->reg); + + /* We can't use readl_poll_timeout() because we can be blocked if + * someone enables this clock before clocksource changes. + * Only jiffies counter is available. Jiffies are incremented by + * interruptions and enable op does not allow to be interrupted. + */ + do { + bit_status = !(readl(clk_elem->reg) & PLL_RDY); + + if (bit_status) + udelay(120); + + } while (bit_status && --timeout); + +unlock: + return bit_status; +} + +static void pll_disable(struct clk *clk) +{ + struct stm32_pll_obj *clk_elem = to_pll(clk); + u32 reg; + + reg = readl(clk_elem->reg); + reg &= ~PLL_ON; + writel(reg, clk_elem->reg); +} + +static u32 pll_frac_val(struct clk *clk) +{ + struct stm32_pll_obj *clk_elem = to_pll(clk); + u32 reg, frac = 0; + + reg = readl(clk_elem->reg + FRAC_OFFSET); + if (reg & FRACLE) + frac = (reg >> FRAC_SHIFT) & FRAC_MASK; + + return frac; +} + +static unsigned long pll_recalc_rate(struct clk *clk, + unsigned long parent_rate) +{ + struct stm32_pll_obj *clk_elem = to_pll(clk); + u32 reg; + u32 frac, divm, divn; + u64 rate, rate_frac = 0; + + reg = readl(clk_elem->reg + 4); + + divm = ((reg >> DIVM_SHIFT) & DIVM_MASK) + 1; + divn = ((reg >> DIVN_SHIFT) & DIVN_MASK) + 1; + rate = (u64)parent_rate * divn; + + do_div(rate, divm); + + frac = pll_frac_val(clk); + if (frac) { + rate_frac = (u64)parent_rate * (u64)frac; + do_div(rate_frac, (divm * 8192)); + } + + return rate + rate_frac; +} + +static int pll_is_enabled(struct clk *clk) +{ + int ret; + + ret = __pll_is_enabled(clk); + + return ret; +} + +static const struct clk_ops pll_ops = { + .enable = pll_enable, + .disable = pll_disable, + .recalc_rate = pll_recalc_rate, + .is_enabled = pll_is_enabled, +}; + +static struct clk *clk_register_pll(const char *name, + const char *parent_name, + void __iomem *reg, + unsigned long flags) +{ + struct stm32_pll_obj *element; + struct clk *clk; + int err; + + element = kzalloc(sizeof(*element), GFP_KERNEL); + if (!element) + return ERR_PTR(-ENOMEM); + + element->parent = parent_name; + + clk = &element->clk; + + clk->name = name; + clk->ops = &pll_ops; + clk->flags = flags; + clk->parent_names = &element->parent; + clk->num_parents = 1; + + element->reg = reg; + + err = clk_register(clk); + + if (err) { + kfree(element); + return ERR_PTR(err); + } + + return clk; +} + +/* Kernel Timer */ +struct timer_cker { + void __iomem *apbdiv; + void __iomem *timpre; + const char *parent; + struct clk clk; +}; + +#define to_timer_cker(_hw) container_of(_hw, struct timer_cker, clk) + +#define APB_DIV_MASK 0x07 +#define TIM_PRE_MASK 0x01 + +static unsigned long __bestmult(struct clk *clk, unsigned long rate, + unsigned long parent_rate) +{ + struct timer_cker *tim_ker = to_timer_cker(clk); + u32 prescaler; + unsigned int mult = 0; + + prescaler = readl(tim_ker->apbdiv) & APB_DIV_MASK; + if (prescaler < 2) + return 1; + + mult = 2; + + if (rate / parent_rate >= 4) + mult = 4; + + return mult; +} + +static long timer_ker_round_rate(struct clk *clk, unsigned long rate, + unsigned long *parent_rate) +{ + unsigned long factor = __bestmult(clk, rate, *parent_rate); + + return *parent_rate * factor; +} + +static int timer_ker_set_rate(struct clk *clk, unsigned long rate, + unsigned long parent_rate) +{ + struct timer_cker *tim_ker = to_timer_cker(clk); + unsigned long factor = __bestmult(clk, rate, parent_rate); + int ret = 0; + + switch (factor) { + case 1: + break; + case 2: + writel(0, tim_ker->timpre); + break; + case 4: + writel(1, tim_ker->timpre); + break; + default: + ret = -EINVAL; + } + + return ret; +} + +static unsigned long timer_ker_recalc_rate(struct clk *hw, + unsigned long parent_rate) +{ + struct timer_cker *tim_ker = to_timer_cker(hw); + u32 prescaler, timpre; + u32 mul; + + prescaler = readl(tim_ker->apbdiv) & APB_DIV_MASK; + + timpre = readl(tim_ker->timpre) & TIM_PRE_MASK; + + if (!prescaler) + return parent_rate; + + mul = (timpre + 1) * 2; + + return parent_rate * mul; +} + +static const struct clk_ops timer_ker_ops = { + .recalc_rate = timer_ker_recalc_rate, + .round_rate = timer_ker_round_rate, + .set_rate = timer_ker_set_rate, + +}; + +static struct clk *clk_register_cktim(const char *name, + const char *parent_name, + unsigned long flags, + void __iomem *apbdiv, + void __iomem *timpre) +{ + struct timer_cker *tim_ker; + struct clk *clk; + int err; + + tim_ker = kzalloc(sizeof(*tim_ker), GFP_KERNEL); + if (!tim_ker) + return ERR_PTR(-ENOMEM); + + clk = &tim_ker->clk; + tim_ker->parent = parent_name; + clk->name = name; + clk->parent_names = &tim_ker->parent; + clk->num_parents = 1; + clk->ops = &timer_ker_ops; + clk->flags = flags; + + tim_ker->apbdiv = apbdiv; + tim_ker->timpre = timpre; + + err = clk_register(clk); + if (err) { + kfree(tim_ker); + return ERR_PTR(err); + } + + return clk; +} + +struct stm32_pll_cfg { + u32 offset; +}; + +static struct clk *_clk_register_pll(void __iomem *base, + const struct clock_config *cfg) +{ + struct stm32_pll_cfg *stm_pll_cfg = cfg->cfg; + + return clk_register_pll(cfg->name, cfg->parent_name, + base + stm_pll_cfg->offset, cfg->flags); +} + +struct stm32_cktim_cfg { + u32 offset_apbdiv; + u32 offset_timpre; +}; + +static struct clk *_clk_register_cktim(void __iomem *base, + const struct clock_config *cfg) +{ + struct stm32_cktim_cfg *cktim_cfg = cfg->cfg; + + return clk_register_cktim(cfg->name, cfg->parent_name, cfg->flags, + cktim_cfg->offset_apbdiv + base, + cktim_cfg->offset_timpre + base); +} + +static struct clk * +_clk_stm32_register_gate(void __iomem *base, + const struct clock_config *cfg) +{ + return clk_stm32_register_gate_ops(cfg->name, cfg->parent_name, + cfg->flags, base, cfg->cfg); +} + +static struct clk * +_clk_stm32_register_composite(void __iomem *base, + const struct clock_config *cfg) +{ + return clk_stm32_register_composite(cfg->name, cfg->parent_names, + cfg->num_parents, base, cfg->cfg, + cfg->flags); +} + +#define GATE(_id, _name, _parent, _flags, _offset, _bit_idx, _gate_flags)\ +{\ + .id = _id,\ + .name = _name,\ + .parent_name = _parent,\ + .flags = _flags,\ + .cfg = &(struct gate_cfg) {\ + .reg_off = _offset,\ + .bit_idx = _bit_idx,\ + .gate_flags = _gate_flags,\ + },\ + .func = _clk_hw_register_gate,\ +} + +#define FIXED_FACTOR(_id, _name, _parent, _flags, _mult, _div)\ +{\ + .id = _id,\ + .name = _name,\ + .parent_name = _parent,\ + .flags = _flags,\ + .cfg = &(struct fixed_factor_cfg) {\ + .mult = _mult,\ + .div = _div,\ + },\ + .func = _clk_hw_register_fixed_factor,\ +} + +#define DIV_TABLE(_id, _name, _parent, _flags, _offset, _shift, _width,\ + _div_flags, _div_table)\ +{\ + .id = _id,\ + .name = _name,\ + .parent_name = _parent,\ + .flags = _flags,\ + .cfg = &(struct div_cfg) {\ + .reg_off = _offset,\ + .shift = _shift,\ + .width = _width,\ + .div_flags = _div_flags,\ + .table = _div_table,\ + },\ + .func = _clk_hw_register_divider_table,\ +} + +#define DIV(_id, _name, _parent, _flags, _offset, _shift, _width, _div_flags)\ + DIV_TABLE(_id, _name, _parent, _flags, _offset, _shift, _width,\ + _div_flags, NULL) + +#define MUX(_id, _name, _parents, _flags, _offset, _shift, _width, _mux_flags)\ +{\ + .id = _id,\ + .name = _name,\ + .parent_names = _parents,\ + .num_parents = ARRAY_SIZE(_parents),\ + .flags = _flags,\ + .cfg = &(struct mux_cfg) {\ + .reg_off = _offset,\ + .shift = _shift,\ + .width = _width,\ + .mux_flags = _mux_flags,\ + },\ + .func = _clk_hw_register_mux,\ +} + +#define PLL(_id, _name, _parent, _flags, _offset)\ +{\ + .id = _id,\ + .name = _name,\ + .parent_name = _parent,\ + .flags = _flags,\ + .cfg = &(struct stm32_pll_cfg) {\ + .offset = _offset,\ + },\ + .func = _clk_register_pll,\ +} + +#define STM32_CKTIM(_name, _parent, _flags, _offset_apbdiv, _offset_timpre)\ +{\ + .id = NO_ID,\ + .name = _name,\ + .parent_name = _parent,\ + .flags = _flags,\ + .cfg = &(struct stm32_cktim_cfg) {\ + .offset_apbdiv = _offset_apbdiv,\ + .offset_timpre = _offset_timpre,\ + },\ + .func = _clk_register_cktim,\ +} + +#define STM32_TIM(_id, _name, _parent, _offset_set, _bit_idx)\ + GATE_MP1(_id, _name, _parent, CLK_SET_RATE_PARENT,\ + _offset_set, _bit_idx, 0) + +/* STM32 GATE */ +#define STM32_GATE(_id, _name, _parent, _flags, _gate)\ +{\ + .id = _id,\ + .name = _name,\ + .parent_name = _parent,\ + .flags = _flags,\ + .cfg = (struct stm32_gate_cfg *) {_gate},\ + .func = _clk_stm32_register_gate,\ +} + +#define _STM32_GATE(_gate_offset, _gate_bit_idx, _gate_flags, _ops)\ + (&(struct stm32_gate_cfg) {\ + &(struct gate_cfg) {\ + .reg_off = _gate_offset,\ + .bit_idx = _gate_bit_idx,\ + .gate_flags = _gate_flags,\ + },\ + .ops = _ops,\ + }) + +#define _STM32_MGATE(_mgate)\ + (&per_gate_cfg[_mgate]) + +#define _GATE(_gate_offset, _gate_bit_idx, _gate_flags)\ + _STM32_GATE(_gate_offset, _gate_bit_idx, _gate_flags,\ + NULL)\ + +#define _GATE_MP1(_gate_offset, _gate_bit_idx, _gate_flags)\ + _STM32_GATE(_gate_offset, _gate_bit_idx, _gate_flags,\ + &mp1_gate_clk_ops)\ + +#define _MGATE_MP1(_mgate)\ + .gate = &per_gate_cfg[_mgate] + +#define GATE_MP1(_id, _name, _parent, _flags, _offset, _bit_idx, _gate_flags)\ + STM32_GATE(_id, _name, _parent, _flags,\ + _GATE_MP1(_offset, _bit_idx, _gate_flags)) + +#define MGATE_MP1(_id, _name, _parent, _flags, _mgate)\ + STM32_GATE(_id, _name, _parent, _flags,\ + _STM32_MGATE(_mgate)) + +#define _STM32_DIV(_div_offset, _div_shift, _div_width,\ + _div_flags, _div_table, _ops)\ + .div = &(struct stm32_div_cfg) {\ + &(struct div_cfg) {\ + .reg_off = _div_offset,\ + .shift = _div_shift,\ + .width = _div_width,\ + .div_flags = _div_flags,\ + .table = _div_table,\ + },\ + .ops = _ops,\ + } + +#define _DIV(_div_offset, _div_shift, _div_width, _div_flags, _div_table)\ + _STM32_DIV(_div_offset, _div_shift, _div_width,\ + _div_flags, _div_table, NULL)\ + +#define _STM32_MUX(_offset, _shift, _width, _mux_flags, _mmux, _ops)\ + .mux = &(struct stm32_mux_cfg) {\ + &(struct mux_cfg) {\ + .reg_off = _offset,\ + .shift = _shift,\ + .width = _width,\ + .mux_flags = _mux_flags,\ + .table = NULL,\ + },\ + .mmux = _mmux,\ + .ops = _ops,\ + } + +#define _MUX(_offset, _shift, _width, _mux_flags)\ + _STM32_MUX(_offset, _shift, _width, _mux_flags, NULL, NULL)\ + +#define _MMUX(_mmux) .mux = &ker_mux_cfg[_mmux] + +#define PARENT(_parent) ((const char *[]) { _parent}) + +#define _NO_MUX .mux = NULL +#define _NO_DIV .div = NULL +#define _NO_GATE .gate = NULL + +#define COMPOSITE(_id, _name, _parents, _flags, _gate, _mux, _div)\ +{\ + .id = _id,\ + .name = _name,\ + .parent_names = _parents,\ + .num_parents = ARRAY_SIZE(_parents),\ + .flags = _flags,\ + .cfg = &(struct stm32_composite_cfg) {\ + _gate,\ + _mux,\ + _div,\ + },\ + .func = _clk_stm32_register_composite,\ +} + +#define PCLK(_id, _name, _parent, _flags, _mgate)\ + MGATE_MP1(_id, _name, _parent, _flags, _mgate) + +#define KCLK(_id, _name, _parents, _flags, _mgate, _mmux)\ + COMPOSITE(_id, _name, _parents, CLK_OPS_PARENT_ENABLE | _flags,\ + _MGATE_MP1(_mgate),\ + _MMUX(_mmux),\ + _NO_DIV) + +enum { + G_SAI1, + G_SAI2, + G_SAI3, + G_SAI4, + G_SPI1, + G_SPI2, + G_SPI3, + G_SPI4, + G_SPI5, + G_SPI6, + G_SPDIF, + G_I2C1, + G_I2C2, + G_I2C3, + G_I2C4, + G_I2C5, + G_I2C6, + G_USART2, + G_UART4, + G_USART3, + G_UART5, + G_USART1, + G_USART6, + G_UART7, + G_UART8, + G_LPTIM1, + G_LPTIM2, + G_LPTIM3, + G_LPTIM4, + G_LPTIM5, + G_LTDC, + G_DSI, + G_QSPI, + G_FMC, + G_SDMMC1, + G_SDMMC2, + G_SDMMC3, + G_USBO, + G_USBPHY, + G_RNG1, + G_RNG2, + G_FDCAN, + G_DAC12, + G_CEC, + G_ADC12, + G_GPU, + G_STGEN, + G_DFSDM, + G_ADFSDM, + G_TIM2, + G_TIM3, + G_TIM4, + G_TIM5, + G_TIM6, + G_TIM7, + G_TIM12, + G_TIM13, + G_TIM14, + G_MDIO, + G_TIM1, + G_TIM8, + G_TIM15, + G_TIM16, + G_TIM17, + G_SYSCFG, + G_VREF, + G_TMPSENS, + G_PMBCTRL, + G_HDP, + G_IWDG2, + G_STGENRO, + G_DMA1, + G_DMA2, + G_DMAMUX, + G_DCMI, + G_CRYP2, + G_HASH2, + G_CRC2, + G_HSEM, + G_IPCC, + G_GPIOA, + G_GPIOB, + G_GPIOC, + G_GPIOD, + G_GPIOE, + G_GPIOF, + G_GPIOG, + G_GPIOH, + G_GPIOI, + G_GPIOJ, + G_GPIOK, + G_MDMA, + G_ETHCK, + G_ETHTX, + G_ETHRX, + G_ETHMAC, + G_CRC1, + G_USBH, + G_ETHSTP, + G_RTCAPB, + G_TZC1, + G_TZC2, + G_TZPC, + G_IWDG1, + G_BSEC, + G_GPIOZ, + G_CRYP1, + G_HASH1, + G_BKPSRAM, + + G_LAST +}; + +static struct stm32_mgate mp1_mgate[G_LAST]; + +#define _K_GATE(_id, _gate_offset, _gate_bit_idx, _gate_flags,\ + _mgate, _ops)\ + [_id] = {\ + &(struct gate_cfg) {\ + .reg_off = _gate_offset,\ + .bit_idx = _gate_bit_idx,\ + .gate_flags = _gate_flags,\ + },\ + .mgate = _mgate,\ + .ops = _ops,\ + } + +#define K_GATE(_id, _gate_offset, _gate_bit_idx, _gate_flags)\ + _K_GATE(_id, _gate_offset, _gate_bit_idx, _gate_flags,\ + NULL, &mp1_gate_clk_ops) + +#define K_MGATE(_id, _gate_offset, _gate_bit_idx, _gate_flags)\ + _K_GATE(_id, _gate_offset, _gate_bit_idx, _gate_flags,\ + &mp1_mgate[_id], &mp1_mgate_clk_ops) + +/* Peripheral gates */ +static struct stm32_gate_cfg per_gate_cfg[G_LAST] = { + /* Multi gates */ + K_GATE(G_MDIO, RCC_APB1ENSETR, 31, 0), + K_MGATE(G_DAC12, RCC_APB1ENSETR, 29, 0), + K_MGATE(G_CEC, RCC_APB1ENSETR, 27, 0), + K_MGATE(G_SPDIF, RCC_APB1ENSETR, 26, 0), + K_MGATE(G_I2C5, RCC_APB1ENSETR, 24, 0), + K_MGATE(G_I2C3, RCC_APB1ENSETR, 23, 0), + K_MGATE(G_I2C2, RCC_APB1ENSETR, 22, 0), + K_MGATE(G_I2C1, RCC_APB1ENSETR, 21, 0), + K_MGATE(G_UART8, RCC_APB1ENSETR, 19, 0), + K_MGATE(G_UART7, RCC_APB1ENSETR, 18, 0), + K_MGATE(G_UART5, RCC_APB1ENSETR, 17, 0), + K_MGATE(G_UART4, RCC_APB1ENSETR, 16, 0), + K_MGATE(G_USART3, RCC_APB1ENSETR, 15, 0), + K_MGATE(G_USART2, RCC_APB1ENSETR, 14, 0), + K_MGATE(G_SPI3, RCC_APB1ENSETR, 12, 0), + K_MGATE(G_SPI2, RCC_APB1ENSETR, 11, 0), + K_MGATE(G_LPTIM1, RCC_APB1ENSETR, 9, 0), + K_GATE(G_TIM14, RCC_APB1ENSETR, 8, 0), + K_GATE(G_TIM13, RCC_APB1ENSETR, 7, 0), + K_GATE(G_TIM12, RCC_APB1ENSETR, 6, 0), + K_GATE(G_TIM7, RCC_APB1ENSETR, 5, 0), + K_GATE(G_TIM6, RCC_APB1ENSETR, 4, 0), + K_GATE(G_TIM5, RCC_APB1ENSETR, 3, 0), + K_GATE(G_TIM4, RCC_APB1ENSETR, 2, 0), + K_GATE(G_TIM3, RCC_APB1ENSETR, 1, 0), + K_GATE(G_TIM2, RCC_APB1ENSETR, 0, 0), + + K_MGATE(G_FDCAN, RCC_APB2ENSETR, 24, 0), + K_GATE(G_ADFSDM, RCC_APB2ENSETR, 21, 0), + K_GATE(G_DFSDM, RCC_APB2ENSETR, 20, 0), + K_MGATE(G_SAI3, RCC_APB2ENSETR, 18, 0), + K_MGATE(G_SAI2, RCC_APB2ENSETR, 17, 0), + K_MGATE(G_SAI1, RCC_APB2ENSETR, 16, 0), + K_MGATE(G_USART6, RCC_APB2ENSETR, 13, 0), + K_MGATE(G_SPI5, RCC_APB2ENSETR, 10, 0), + K_MGATE(G_SPI4, RCC_APB2ENSETR, 9, 0), + K_MGATE(G_SPI1, RCC_APB2ENSETR, 8, 0), + K_GATE(G_TIM17, RCC_APB2ENSETR, 4, 0), + K_GATE(G_TIM16, RCC_APB2ENSETR, 3, 0), + K_GATE(G_TIM15, RCC_APB2ENSETR, 2, 0), + K_GATE(G_TIM8, RCC_APB2ENSETR, 1, 0), + K_GATE(G_TIM1, RCC_APB2ENSETR, 0, 0), + + K_GATE(G_HDP, RCC_APB3ENSETR, 20, 0), + K_GATE(G_PMBCTRL, RCC_APB3ENSETR, 17, 0), + K_GATE(G_TMPSENS, RCC_APB3ENSETR, 16, 0), + K_GATE(G_VREF, RCC_APB3ENSETR, 13, 0), + K_GATE(G_SYSCFG, RCC_APB3ENSETR, 11, 0), + K_MGATE(G_SAI4, RCC_APB3ENSETR, 8, 0), + K_MGATE(G_LPTIM5, RCC_APB3ENSETR, 3, 0), + K_MGATE(G_LPTIM4, RCC_APB3ENSETR, 2, 0), + K_MGATE(G_LPTIM3, RCC_APB3ENSETR, 1, 0), + K_MGATE(G_LPTIM2, RCC_APB3ENSETR, 0, 0), + + K_GATE(G_STGENRO, RCC_APB4ENSETR, 20, 0), + K_MGATE(G_USBPHY, RCC_APB4ENSETR, 16, 0), + K_GATE(G_IWDG2, RCC_APB4ENSETR, 15, 0), + K_MGATE(G_DSI, RCC_APB4ENSETR, 4, 0), + K_MGATE(G_LTDC, RCC_APB4ENSETR, 0, 0), + + K_GATE(G_STGEN, RCC_APB5ENSETR, 20, 0), + K_GATE(G_BSEC, RCC_APB5ENSETR, 16, 0), + K_GATE(G_IWDG1, RCC_APB5ENSETR, 15, 0), + K_GATE(G_TZPC, RCC_APB5ENSETR, 13, 0), + K_GATE(G_TZC2, RCC_APB5ENSETR, 12, 0), + K_GATE(G_TZC1, RCC_APB5ENSETR, 11, 0), + K_GATE(G_RTCAPB, RCC_APB5ENSETR, 8, 0), + K_MGATE(G_USART1, RCC_APB5ENSETR, 4, 0), + K_MGATE(G_I2C6, RCC_APB5ENSETR, 3, 0), + K_MGATE(G_I2C4, RCC_APB5ENSETR, 2, 0), + K_MGATE(G_SPI6, RCC_APB5ENSETR, 0, 0), + + K_MGATE(G_SDMMC3, RCC_AHB2ENSETR, 16, 0), + K_MGATE(G_USBO, RCC_AHB2ENSETR, 8, 0), + K_MGATE(G_ADC12, RCC_AHB2ENSETR, 5, 0), + K_GATE(G_DMAMUX, RCC_AHB2ENSETR, 2, 0), + K_GATE(G_DMA2, RCC_AHB2ENSETR, 1, 0), + K_GATE(G_DMA1, RCC_AHB2ENSETR, 0, 0), + + K_GATE(G_IPCC, RCC_AHB3ENSETR, 12, 0), + K_GATE(G_HSEM, RCC_AHB3ENSETR, 11, 0), + K_GATE(G_CRC2, RCC_AHB3ENSETR, 7, 0), + K_MGATE(G_RNG2, RCC_AHB3ENSETR, 6, 0), + K_GATE(G_HASH2, RCC_AHB3ENSETR, 5, 0), + K_GATE(G_CRYP2, RCC_AHB3ENSETR, 4, 0), + K_GATE(G_DCMI, RCC_AHB3ENSETR, 0, 0), + + K_GATE(G_GPIOK, RCC_AHB4ENSETR, 10, 0), + K_GATE(G_GPIOJ, RCC_AHB4ENSETR, 9, 0), + K_GATE(G_GPIOI, RCC_AHB4ENSETR, 8, 0), + K_GATE(G_GPIOH, RCC_AHB4ENSETR, 7, 0), + K_GATE(G_GPIOG, RCC_AHB4ENSETR, 6, 0), + K_GATE(G_GPIOF, RCC_AHB4ENSETR, 5, 0), + K_GATE(G_GPIOE, RCC_AHB4ENSETR, 4, 0), + K_GATE(G_GPIOD, RCC_AHB4ENSETR, 3, 0), + K_GATE(G_GPIOC, RCC_AHB4ENSETR, 2, 0), + K_GATE(G_GPIOB, RCC_AHB4ENSETR, 1, 0), + K_GATE(G_GPIOA, RCC_AHB4ENSETR, 0, 0), + + K_GATE(G_BKPSRAM, RCC_AHB5ENSETR, 8, 0), + K_MGATE(G_RNG1, RCC_AHB5ENSETR, 6, 0), + K_GATE(G_HASH1, RCC_AHB5ENSETR, 5, 0), + K_GATE(G_CRYP1, RCC_AHB5ENSETR, 4, 0), + K_GATE(G_GPIOZ, RCC_AHB5ENSETR, 0, 0), + + K_GATE(G_USBH, RCC_AHB6ENSETR, 24, 0), + K_GATE(G_CRC1, RCC_AHB6ENSETR, 20, 0), + K_MGATE(G_SDMMC2, RCC_AHB6ENSETR, 17, 0), + K_MGATE(G_SDMMC1, RCC_AHB6ENSETR, 16, 0), + K_MGATE(G_QSPI, RCC_AHB6ENSETR, 14, 0), + K_MGATE(G_FMC, RCC_AHB6ENSETR, 12, 0), + K_GATE(G_ETHMAC, RCC_AHB6ENSETR, 10, 0), + K_GATE(G_ETHRX, RCC_AHB6ENSETR, 9, 0), + K_GATE(G_ETHTX, RCC_AHB6ENSETR, 8, 0), + K_GATE(G_ETHCK, RCC_AHB6ENSETR, 7, 0), + K_MGATE(G_GPU, RCC_AHB6ENSETR, 5, 0), + K_GATE(G_MDMA, RCC_AHB6ENSETR, 0, 0), + K_GATE(G_ETHSTP, RCC_AHB6LPENSETR, 11, 0), +}; + +enum { + M_SDMMC12, + M_SDMMC3, + M_FMC, + M_QSPI, + M_RNG1, + M_RNG2, + M_USBPHY, + M_USBO, + M_STGEN, + M_SPDIF, + M_SPI1, + M_SPI23, + M_SPI45, + M_SPI6, + M_CEC, + M_I2C12, + M_I2C35, + M_I2C46, + M_LPTIM1, + M_LPTIM23, + M_LPTIM45, + M_USART1, + M_UART24, + M_UART35, + M_USART6, + M_UART78, + M_SAI1, + M_SAI2, + M_SAI3, + M_SAI4, + M_DSI, + M_FDCAN, + M_ADC12, + M_ETHCK, + M_CKPER, + M_LAST +}; + +static struct stm32_mmux ker_mux[M_LAST]; + +#define _K_MUX(_id, _offset, _shift, _width, _mux_flags, _mmux, _ops)\ + [_id] = {\ + &(struct mux_cfg) {\ + .reg_off = _offset,\ + .shift = _shift,\ + .width = _width,\ + .mux_flags = _mux_flags,\ + .table = NULL,\ + },\ + .mmux = _mmux,\ + .ops = _ops,\ + } + +#define K_MUX(_id, _offset, _shift, _width, _mux_flags)\ + _K_MUX(_id, _offset, _shift, _width, _mux_flags,\ + NULL, NULL) + +#define K_MMUX(_id, _offset, _shift, _width, _mux_flags)\ + _K_MUX(_id, _offset, _shift, _width, _mux_flags,\ + &ker_mux[_id], &clk_mmux_ops) + +static const struct stm32_mux_cfg ker_mux_cfg[M_LAST] = { + /* Kernel multi mux */ + K_MMUX(M_SDMMC12, RCC_SDMMC12CKSELR, 0, 3, 0), + K_MMUX(M_SPI23, RCC_SPI2S23CKSELR, 0, 3, 0), + K_MMUX(M_SPI45, RCC_SPI2S45CKSELR, 0, 3, 0), + K_MMUX(M_I2C12, RCC_I2C12CKSELR, 0, 3, 0), + K_MMUX(M_I2C35, RCC_I2C35CKSELR, 0, 3, 0), + K_MMUX(M_LPTIM23, RCC_LPTIM23CKSELR, 0, 3, 0), + K_MMUX(M_LPTIM45, RCC_LPTIM45CKSELR, 0, 3, 0), + K_MMUX(M_UART24, RCC_UART24CKSELR, 0, 3, 0), + K_MMUX(M_UART35, RCC_UART35CKSELR, 0, 3, 0), + K_MMUX(M_UART78, RCC_UART78CKSELR, 0, 3, 0), + K_MMUX(M_SAI1, RCC_SAI1CKSELR, 0, 3, 0), + K_MMUX(M_ETHCK, RCC_ETHCKSELR, 0, 2, 0), + K_MMUX(M_I2C46, RCC_I2C46CKSELR, 0, 3, 0), + + /* Kernel simple mux */ + K_MUX(M_RNG2, RCC_RNG2CKSELR, 0, 2, 0), + K_MUX(M_SDMMC3, RCC_SDMMC3CKSELR, 0, 3, 0), + K_MUX(M_FMC, RCC_FMCCKSELR, 0, 2, 0), + K_MUX(M_QSPI, RCC_QSPICKSELR, 0, 2, 0), + K_MUX(M_USBPHY, RCC_USBCKSELR, 0, 2, 0), + K_MUX(M_USBO, RCC_USBCKSELR, 4, 1, 0), + K_MUX(M_SPDIF, RCC_SPDIFCKSELR, 0, 2, 0), + K_MUX(M_SPI1, RCC_SPI2S1CKSELR, 0, 3, 0), + K_MUX(M_CEC, RCC_CECCKSELR, 0, 2, 0), + K_MUX(M_LPTIM1, RCC_LPTIM1CKSELR, 0, 3, 0), + K_MUX(M_USART6, RCC_UART6CKSELR, 0, 3, 0), + K_MUX(M_FDCAN, RCC_FDCANCKSELR, 0, 2, 0), + K_MUX(M_SAI2, RCC_SAI2CKSELR, 0, 3, 0), + K_MUX(M_SAI3, RCC_SAI3CKSELR, 0, 3, 0), + K_MUX(M_SAI4, RCC_SAI4CKSELR, 0, 3, 0), + K_MUX(M_ADC12, RCC_ADCCKSELR, 0, 2, 0), + K_MUX(M_DSI, RCC_DSICKSELR, 0, 1, 0), + K_MUX(M_CKPER, RCC_CPERCKSELR, 0, 2, 0), + K_MUX(M_RNG1, RCC_RNG1CKSELR, 0, 2, 0), + K_MUX(M_STGEN, RCC_STGENCKSELR, 0, 2, 0), + K_MUX(M_USART1, RCC_UART1CKSELR, 0, 3, 0), + K_MUX(M_SPI6, RCC_SPI6CKSELR, 0, 3, 0), +}; + +static const struct clock_config stm32mp1_clock_cfg[] = { + /* Oscillator divider */ + DIV(NO_ID, "clk-hsi-div", "clk-hsi", 0, RCC_HSICFGR, 0, 2, + CLK_DIVIDER_READ_ONLY), + + /* External / Internal Oscillators */ + GATE_MP1(CK_HSE, "ck_hse", "clk-hse", 0, RCC_OCENSETR, 8, 0), + GATE_MP1(CK_CSI, "ck_csi", "clk-csi", 0, RCC_OCENSETR, 4, 0), + GATE_MP1(CK_HSI, "ck_hsi", "clk-hsi-div", 0, RCC_OCENSETR, 0, 0), + GATE(CK_LSI, "ck_lsi", "clk-lsi", 0, RCC_RDLSICR, 0, 0), + GATE(CK_LSE, "ck_lse", "clk-lse", 0, RCC_BDCR, 0, 0), + + FIXED_FACTOR(CK_HSE_DIV2, "clk-hse-div2", "ck_hse", 0, 1, 2), + + /* ref clock pll */ + MUX(NO_ID, "ref1", ref12_parents, CLK_OPS_PARENT_ENABLE, RCC_RCK12SELR, + 0, 2, CLK_MUX_READ_ONLY), + + MUX(NO_ID, "ref3", ref3_parents, CLK_OPS_PARENT_ENABLE, RCC_RCK3SELR, + 0, 2, CLK_MUX_READ_ONLY), + + MUX(NO_ID, "ref4", ref4_parents, CLK_OPS_PARENT_ENABLE, RCC_RCK4SELR, + 0, 2, CLK_MUX_READ_ONLY), + + /* PLLs */ + PLL(PLL1, "pll1", "ref1", CLK_IGNORE_UNUSED, RCC_PLL1CR), + PLL(PLL2, "pll2", "ref1", CLK_IGNORE_UNUSED, RCC_PLL2CR), + PLL(PLL3, "pll3", "ref3", CLK_IGNORE_UNUSED, RCC_PLL3CR), + PLL(PLL4, "pll4", "ref4", CLK_IGNORE_UNUSED, RCC_PLL4CR), + + /* ODF */ + COMPOSITE(PLL1_P, "pll1_p", PARENT("pll1"), 0, + _GATE(RCC_PLL1CR, 4, 0), + _NO_MUX, + _DIV(RCC_PLL1CFGR2, 0, 7, 0, NULL)), + + COMPOSITE(PLL2_P, "pll2_p", PARENT("pll2"), 0, + _GATE(RCC_PLL2CR, 4, 0), + _NO_MUX, + _DIV(RCC_PLL2CFGR2, 0, 7, 0, NULL)), + + COMPOSITE(PLL2_Q, "pll2_q", PARENT("pll2"), 0, + _GATE(RCC_PLL2CR, 5, 0), + _NO_MUX, + _DIV(RCC_PLL2CFGR2, 8, 7, 0, NULL)), + + COMPOSITE(PLL2_R, "pll2_r", PARENT("pll2"), CLK_IS_CRITICAL, + _GATE(RCC_PLL2CR, 6, 0), + _NO_MUX, + _DIV(RCC_PLL2CFGR2, 16, 7, 0, NULL)), + + COMPOSITE(PLL3_P, "pll3_p", PARENT("pll3"), 0, + _GATE(RCC_PLL3CR, 4, 0), + _NO_MUX, + _DIV(RCC_PLL3CFGR2, 0, 7, 0, NULL)), + + COMPOSITE(PLL3_Q, "pll3_q", PARENT("pll3"), 0, + _GATE(RCC_PLL3CR, 5, 0), + _NO_MUX, + _DIV(RCC_PLL3CFGR2, 8, 7, 0, NULL)), + + COMPOSITE(PLL3_R, "pll3_r", PARENT("pll3"), 0, + _GATE(RCC_PLL3CR, 6, 0), + _NO_MUX, + _DIV(RCC_PLL3CFGR2, 16, 7, 0, NULL)), + + COMPOSITE(PLL4_P, "pll4_p", PARENT("pll4"), 0, + _GATE(RCC_PLL4CR, 4, 0), + _NO_MUX, + _DIV(RCC_PLL4CFGR2, 0, 7, 0, NULL)), + + COMPOSITE(PLL4_Q, "pll4_q", PARENT("pll4"), 0, + _GATE(RCC_PLL4CR, 5, 0), + _NO_MUX, + _DIV(RCC_PLL4CFGR2, 8, 7, 0, NULL)), + + COMPOSITE(PLL4_R, "pll4_r", PARENT("pll4"), 0, + _GATE(RCC_PLL4CR, 6, 0), + _NO_MUX, + _DIV(RCC_PLL4CFGR2, 16, 7, 0, NULL)), + + /* MUX system clocks */ + MUX(CK_PER, "ck_per", per_src, CLK_OPS_PARENT_ENABLE, + RCC_CPERCKSELR, 0, 2, 0), + + MUX(CK_MPU, "ck_mpu", cpu_src, CLK_OPS_PARENT_ENABLE | + CLK_IS_CRITICAL, RCC_MPCKSELR, 0, 2, 0), + + COMPOSITE(CK_AXI, "ck_axi", axi_src, CLK_IS_CRITICAL | + CLK_OPS_PARENT_ENABLE, + _NO_GATE, + _MUX(RCC_ASSCKSELR, 0, 2, 0), + _DIV(RCC_AXIDIVR, 0, 3, 0, axi_div_table)), + + COMPOSITE(CK_MCU, "ck_mcu", mcu_src, CLK_IS_CRITICAL | + CLK_OPS_PARENT_ENABLE, + _NO_GATE, + _MUX(RCC_MSSCKSELR, 0, 2, 0), + _DIV(RCC_MCUDIVR, 0, 4, 0, mcu_div_table)), + + DIV_TABLE(NO_ID, "pclk1", "ck_mcu", CLK_IGNORE_UNUSED, RCC_APB1DIVR, 0, + 3, CLK_DIVIDER_READ_ONLY, apb_div_table), + + DIV_TABLE(NO_ID, "pclk2", "ck_mcu", CLK_IGNORE_UNUSED, RCC_APB2DIVR, 0, + 3, CLK_DIVIDER_READ_ONLY, apb_div_table), + + DIV_TABLE(NO_ID, "pclk3", "ck_mcu", CLK_IGNORE_UNUSED, RCC_APB3DIVR, 0, + 3, CLK_DIVIDER_READ_ONLY, apb_div_table), + + DIV_TABLE(NO_ID, "pclk4", "ck_axi", CLK_IGNORE_UNUSED, RCC_APB4DIVR, 0, + 3, CLK_DIVIDER_READ_ONLY, apb_div_table), + + DIV_TABLE(NO_ID, "pclk5", "ck_axi", CLK_IGNORE_UNUSED, RCC_APB5DIVR, 0, + 3, CLK_DIVIDER_READ_ONLY, apb_div_table), + + /* Kernel Timers */ + STM32_CKTIM("ck1_tim", "pclk1", 0, RCC_APB1DIVR, RCC_TIMG1PRER), + STM32_CKTIM("ck2_tim", "pclk2", 0, RCC_APB2DIVR, RCC_TIMG2PRER), + + STM32_TIM(TIM2_K, "tim2_k", "ck1_tim", RCC_APB1ENSETR, 0), + STM32_TIM(TIM3_K, "tim3_k", "ck1_tim", RCC_APB1ENSETR, 1), + STM32_TIM(TIM4_K, "tim4_k", "ck1_tim", RCC_APB1ENSETR, 2), + STM32_TIM(TIM5_K, "tim5_k", "ck1_tim", RCC_APB1ENSETR, 3), + STM32_TIM(TIM6_K, "tim6_k", "ck1_tim", RCC_APB1ENSETR, 4), + STM32_TIM(TIM7_K, "tim7_k", "ck1_tim", RCC_APB1ENSETR, 5), + STM32_TIM(TIM12_K, "tim12_k", "ck1_tim", RCC_APB1ENSETR, 6), + STM32_TIM(TIM13_K, "tim13_k", "ck1_tim", RCC_APB1ENSETR, 7), + STM32_TIM(TIM14_K, "tim14_k", "ck1_tim", RCC_APB1ENSETR, 8), + STM32_TIM(TIM1_K, "tim1_k", "ck2_tim", RCC_APB2ENSETR, 0), + STM32_TIM(TIM8_K, "tim8_k", "ck2_tim", RCC_APB2ENSETR, 1), + STM32_TIM(TIM15_K, "tim15_k", "ck2_tim", RCC_APB2ENSETR, 2), + STM32_TIM(TIM16_K, "tim16_k", "ck2_tim", RCC_APB2ENSETR, 3), + STM32_TIM(TIM17_K, "tim17_k", "ck2_tim", RCC_APB2ENSETR, 4), + + /* Peripheral clocks */ + PCLK(TIM2, "tim2", "pclk1", CLK_IGNORE_UNUSED, G_TIM2), + PCLK(TIM3, "tim3", "pclk1", CLK_IGNORE_UNUSED, G_TIM3), + PCLK(TIM4, "tim4", "pclk1", CLK_IGNORE_UNUSED, G_TIM4), + PCLK(TIM5, "tim5", "pclk1", CLK_IGNORE_UNUSED, G_TIM5), + PCLK(TIM6, "tim6", "pclk1", CLK_IGNORE_UNUSED, G_TIM6), + PCLK(TIM7, "tim7", "pclk1", CLK_IGNORE_UNUSED, G_TIM7), + PCLK(TIM12, "tim12", "pclk1", CLK_IGNORE_UNUSED, G_TIM12), + PCLK(TIM13, "tim13", "pclk1", CLK_IGNORE_UNUSED, G_TIM13), + PCLK(TIM14, "tim14", "pclk1", CLK_IGNORE_UNUSED, G_TIM14), + PCLK(LPTIM1, "lptim1", "pclk1", 0, G_LPTIM1), + PCLK(SPI2, "spi2", "pclk1", 0, G_SPI2), + PCLK(SPI3, "spi3", "pclk1", 0, G_SPI3), + PCLK(USART2, "usart2", "pclk1", 0, G_USART2), + PCLK(USART3, "usart3", "pclk1", 0, G_USART3), + PCLK(UART4, "uart4", "pclk1", 0, G_UART4), + PCLK(UART5, "uart5", "pclk1", 0, G_UART5), + PCLK(UART7, "uart7", "pclk1", 0, G_UART7), + PCLK(UART8, "uart8", "pclk1", 0, G_UART8), + PCLK(I2C1, "i2c1", "pclk1", 0, G_I2C1), + PCLK(I2C2, "i2c2", "pclk1", 0, G_I2C2), + PCLK(I2C3, "i2c3", "pclk1", 0, G_I2C3), + PCLK(I2C5, "i2c5", "pclk1", 0, G_I2C5), + PCLK(SPDIF, "spdif", "pclk1", 0, G_SPDIF), + PCLK(CEC, "cec", "pclk1", 0, G_CEC), + PCLK(DAC12, "dac12", "pclk1", 0, G_DAC12), + PCLK(MDIO, "mdio", "pclk1", 0, G_MDIO), + PCLK(TIM1, "tim1", "pclk2", CLK_IGNORE_UNUSED, G_TIM1), + PCLK(TIM8, "tim8", "pclk2", CLK_IGNORE_UNUSED, G_TIM8), + PCLK(TIM15, "tim15", "pclk2", CLK_IGNORE_UNUSED, G_TIM15), + PCLK(TIM16, "tim16", "pclk2", CLK_IGNORE_UNUSED, G_TIM16), + PCLK(TIM17, "tim17", "pclk2", CLK_IGNORE_UNUSED, G_TIM17), + PCLK(SPI1, "spi1", "pclk2", 0, G_SPI1), + PCLK(SPI4, "spi4", "pclk2", 0, G_SPI4), + PCLK(SPI5, "spi5", "pclk2", 0, G_SPI5), + PCLK(USART6, "usart6", "pclk2", 0, G_USART6), + PCLK(SAI1, "sai1", "pclk2", 0, G_SAI1), + PCLK(SAI2, "sai2", "pclk2", 0, G_SAI2), + PCLK(SAI3, "sai3", "pclk2", 0, G_SAI3), + PCLK(DFSDM, "dfsdm", "pclk2", 0, G_DFSDM), + PCLK(FDCAN, "fdcan", "pclk2", 0, G_FDCAN), + PCLK(LPTIM2, "lptim2", "pclk3", 0, G_LPTIM2), + PCLK(LPTIM3, "lptim3", "pclk3", 0, G_LPTIM3), + PCLK(LPTIM4, "lptim4", "pclk3", 0, G_LPTIM4), + PCLK(LPTIM5, "lptim5", "pclk3", 0, G_LPTIM5), + PCLK(SAI4, "sai4", "pclk3", 0, G_SAI4), + PCLK(SYSCFG, "syscfg", "pclk3", 0, G_SYSCFG), + PCLK(VREF, "vref", "pclk3", 13, G_VREF), + PCLK(TMPSENS, "tmpsens", "pclk3", 0, G_TMPSENS), + PCLK(PMBCTRL, "pmbctrl", "pclk3", 0, G_PMBCTRL), + PCLK(HDP, "hdp", "pclk3", 0, G_HDP), + PCLK(LTDC, "ltdc", "pclk4", 0, G_LTDC), + PCLK(DSI, "dsi", "pclk4", 0, G_DSI), + PCLK(IWDG2, "iwdg2", "pclk4", 0, G_IWDG2), + PCLK(USBPHY, "usbphy", "pclk4", 0, G_USBPHY), + PCLK(STGENRO, "stgenro", "pclk4", 0, G_STGENRO), + PCLK(SPI6, "spi6", "pclk5", 0, G_SPI6), + PCLK(I2C4, "i2c4", "pclk5", 0, G_I2C4), + PCLK(I2C6, "i2c6", "pclk5", 0, G_I2C6), + PCLK(USART1, "usart1", "pclk5", 0, G_USART1), + PCLK(RTCAPB, "rtcapb", "pclk5", CLK_IGNORE_UNUSED | + CLK_IS_CRITICAL, G_RTCAPB), + PCLK(TZC1, "tzc1", "ck_axi", CLK_IGNORE_UNUSED, G_TZC1), + PCLK(TZC2, "tzc2", "ck_axi", CLK_IGNORE_UNUSED, G_TZC2), + PCLK(TZPC, "tzpc", "pclk5", CLK_IGNORE_UNUSED, G_TZPC), + PCLK(IWDG1, "iwdg1", "pclk5", 0, G_IWDG1), + PCLK(BSEC, "bsec", "pclk5", CLK_IGNORE_UNUSED, G_BSEC), + PCLK(STGEN, "stgen", "pclk5", CLK_IGNORE_UNUSED, G_STGEN), + PCLK(DMA1, "dma1", "ck_mcu", 0, G_DMA1), + PCLK(DMA2, "dma2", "ck_mcu", 0, G_DMA2), + PCLK(DMAMUX, "dmamux", "ck_mcu", 0, G_DMAMUX), + PCLK(ADC12, "adc12", "ck_mcu", 0, G_ADC12), + PCLK(USBO, "usbo", "ck_mcu", 0, G_USBO), + PCLK(SDMMC3, "sdmmc3", "ck_mcu", 0, G_SDMMC3), + PCLK(DCMI, "dcmi", "ck_mcu", 0, G_DCMI), + PCLK(CRYP2, "cryp2", "ck_mcu", 0, G_CRYP2), + PCLK(HASH2, "hash2", "ck_mcu", 0, G_HASH2), + PCLK(RNG2, "rng2", "ck_mcu", 0, G_RNG2), + PCLK(CRC2, "crc2", "ck_mcu", 0, G_CRC2), + PCLK(HSEM, "hsem", "ck_mcu", 0, G_HSEM), + PCLK(IPCC, "ipcc", "ck_mcu", 0, G_IPCC), + PCLK(GPIOA, "gpioa", "ck_mcu", 0, G_GPIOA), + PCLK(GPIOB, "gpiob", "ck_mcu", 0, G_GPIOB), + PCLK(GPIOC, "gpioc", "ck_mcu", 0, G_GPIOC), + PCLK(GPIOD, "gpiod", "ck_mcu", 0, G_GPIOD), + PCLK(GPIOE, "gpioe", "ck_mcu", 0, G_GPIOE), + PCLK(GPIOF, "gpiof", "ck_mcu", 0, G_GPIOF), + PCLK(GPIOG, "gpiog", "ck_mcu", 0, G_GPIOG), + PCLK(GPIOH, "gpioh", "ck_mcu", 0, G_GPIOH), + PCLK(GPIOI, "gpioi", "ck_mcu", 0, G_GPIOI), + PCLK(GPIOJ, "gpioj", "ck_mcu", 0, G_GPIOJ), + PCLK(GPIOK, "gpiok", "ck_mcu", 0, G_GPIOK), + PCLK(GPIOZ, "gpioz", "ck_axi", CLK_IGNORE_UNUSED, G_GPIOZ), + PCLK(CRYP1, "cryp1", "ck_axi", CLK_IGNORE_UNUSED, G_CRYP1), + PCLK(HASH1, "hash1", "ck_axi", CLK_IGNORE_UNUSED, G_HASH1), + PCLK(RNG1, "rng1", "ck_axi", 0, G_RNG1), + PCLK(BKPSRAM, "bkpsram", "ck_axi", CLK_IGNORE_UNUSED, G_BKPSRAM), + PCLK(MDMA, "mdma", "ck_axi", 0, G_MDMA), + PCLK(GPU, "gpu", "ck_axi", 0, G_GPU), + PCLK(ETHTX, "ethtx", "ck_axi", 0, G_ETHTX), + PCLK(ETHRX, "ethrx", "ck_axi", 0, G_ETHRX), + PCLK(ETHMAC, "ethmac", "ck_axi", 0, G_ETHMAC), + PCLK(FMC, "fmc", "ck_axi", CLK_IGNORE_UNUSED, G_FMC), + PCLK(QSPI, "qspi", "ck_axi", CLK_IGNORE_UNUSED, G_QSPI), + PCLK(SDMMC1, "sdmmc1", "ck_axi", 0, G_SDMMC1), + PCLK(SDMMC2, "sdmmc2", "ck_axi", 0, G_SDMMC2), + PCLK(CRC1, "crc1", "ck_axi", 0, G_CRC1), + PCLK(USBH, "usbh", "ck_axi", 0, G_USBH), + PCLK(ETHSTP, "ethstp", "ck_axi", 0, G_ETHSTP), + + /* Kernel clocks */ + KCLK(SDMMC1_K, "sdmmc1_k", sdmmc12_src, 0, G_SDMMC1, M_SDMMC12), + KCLK(SDMMC2_K, "sdmmc2_k", sdmmc12_src, 0, G_SDMMC2, M_SDMMC12), + KCLK(SDMMC3_K, "sdmmc3_k", sdmmc3_src, 0, G_SDMMC3, M_SDMMC3), + KCLK(FMC_K, "fmc_k", fmc_src, 0, G_FMC, M_FMC), + KCLK(QSPI_K, "qspi_k", qspi_src, 0, G_QSPI, M_QSPI), + KCLK(RNG1_K, "rng1_k", rng_src, 0, G_RNG1, M_RNG1), + KCLK(RNG2_K, "rng2_k", rng_src, 0, G_RNG2, M_RNG2), + KCLK(USBPHY_K, "usbphy_k", usbphy_src, 0, G_USBPHY, M_USBPHY), + KCLK(STGEN_K, "stgen_k", stgen_src, CLK_IS_CRITICAL, G_STGEN, M_STGEN), + KCLK(SPDIF_K, "spdif_k", spdif_src, 0, G_SPDIF, M_SPDIF), + KCLK(SPI1_K, "spi1_k", spi123_src, 0, G_SPI1, M_SPI1), + KCLK(SPI2_K, "spi2_k", spi123_src, 0, G_SPI2, M_SPI23), + KCLK(SPI3_K, "spi3_k", spi123_src, 0, G_SPI3, M_SPI23), + KCLK(SPI4_K, "spi4_k", spi45_src, 0, G_SPI4, M_SPI45), + KCLK(SPI5_K, "spi5_k", spi45_src, 0, G_SPI5, M_SPI45), + KCLK(SPI6_K, "spi6_k", spi6_src, 0, G_SPI6, M_SPI6), + KCLK(CEC_K, "cec_k", cec_src, 0, G_CEC, M_CEC), + KCLK(I2C1_K, "i2c1_k", i2c12_src, 0, G_I2C1, M_I2C12), + KCLK(I2C2_K, "i2c2_k", i2c12_src, 0, G_I2C2, M_I2C12), + KCLK(I2C3_K, "i2c3_k", i2c35_src, 0, G_I2C3, M_I2C35), + KCLK(I2C5_K, "i2c5_k", i2c35_src, 0, G_I2C5, M_I2C35), + KCLK(I2C4_K, "i2c4_k", i2c46_src, 0, G_I2C4, M_I2C46), + KCLK(I2C6_K, "i2c6_k", i2c46_src, 0, G_I2C6, M_I2C46), + KCLK(LPTIM1_K, "lptim1_k", lptim1_src, 0, G_LPTIM1, M_LPTIM1), + KCLK(LPTIM2_K, "lptim2_k", lptim23_src, 0, G_LPTIM2, M_LPTIM23), + KCLK(LPTIM3_K, "lptim3_k", lptim23_src, 0, G_LPTIM3, M_LPTIM23), + KCLK(LPTIM4_K, "lptim4_k", lptim45_src, 0, G_LPTIM4, M_LPTIM45), + KCLK(LPTIM5_K, "lptim5_k", lptim45_src, 0, G_LPTIM5, M_LPTIM45), + KCLK(USART1_K, "usart1_k", usart1_src, 0, G_USART1, M_USART1), + KCLK(USART2_K, "usart2_k", usart234578_src, 0, G_USART2, M_UART24), + KCLK(USART3_K, "usart3_k", usart234578_src, 0, G_USART3, M_UART35), + KCLK(UART4_K, "uart4_k", usart234578_src, 0, G_UART4, M_UART24), + KCLK(UART5_K, "uart5_k", usart234578_src, 0, G_UART5, M_UART35), + KCLK(USART6_K, "uart6_k", usart6_src, 0, G_USART6, M_USART6), + KCLK(UART7_K, "uart7_k", usart234578_src, 0, G_UART7, M_UART78), + KCLK(UART8_K, "uart8_k", usart234578_src, 0, G_UART8, M_UART78), + KCLK(FDCAN_K, "fdcan_k", fdcan_src, 0, G_FDCAN, M_FDCAN), + KCLK(SAI1_K, "sai1_k", sai_src, 0, G_SAI1, M_SAI1), + KCLK(SAI2_K, "sai2_k", sai2_src, 0, G_SAI2, M_SAI2), + KCLK(SAI3_K, "sai3_k", sai_src, 0, G_SAI3, M_SAI3), + KCLK(SAI4_K, "sai4_k", sai_src, 0, G_SAI4, M_SAI4), + KCLK(ADC12_K, "adc12_k", adc12_src, 0, G_ADC12, M_ADC12), + KCLK(DSI_K, "dsi_k", dsi_src, 0, G_DSI, M_DSI), + KCLK(ADFSDM_K, "adfsdm_k", sai_src, 0, G_ADFSDM, M_SAI1), + KCLK(USBO_K, "usbo_k", usbo_src, 0, G_USBO, M_USBO), + KCLK(ETHCK_K, "ethck_k", eth_src, 0, G_ETHCK, M_ETHCK), + + /* Particulary Kernel Clocks (no mux or no gate) */ + MGATE_MP1(DFSDM_K, "dfsdm_k", "ck_mcu", 0, G_DFSDM), + MGATE_MP1(DSI_PX, "dsi_px", "pll4_q", CLK_SET_RATE_PARENT, G_DSI), + MGATE_MP1(LTDC_PX, "ltdc_px", "pll4_q", CLK_SET_RATE_PARENT, G_LTDC), + MGATE_MP1(GPU_K, "gpu_k", "pll2_q", 0, G_GPU), + MGATE_MP1(DAC12_K, "dac12_k", "ck_lsi", 0, G_DAC12), + + COMPOSITE(ETHPTP_K, "ethptp_k", eth_src, CLK_OPS_PARENT_ENABLE, + _NO_GATE, + _MMUX(M_ETHCK), + _DIV(RCC_ETHCKSELR, 4, 4, 0, NULL)), + + /* RTC clock */ + DIV(NO_ID, "ck_hse_rtc", "ck_hse", 0, RCC_RTCDIVR, 0, 7, 0), + + COMPOSITE(RTC, "ck_rtc", rtc_src, CLK_OPS_PARENT_ENABLE | + CLK_SET_RATE_PARENT, + _GATE(RCC_BDCR, 20, 0), + _MUX(RCC_BDCR, 16, 2, 0), + _NO_DIV), + + /* MCO clocks */ + COMPOSITE(CK_MCO1, "ck_mco1", mco1_src, CLK_OPS_PARENT_ENABLE | + CLK_SET_RATE_NO_REPARENT, + _GATE(RCC_MCO1CFGR, 12, 0), + _MUX(RCC_MCO1CFGR, 0, 3, 0), + _DIV(RCC_MCO1CFGR, 4, 4, 0, NULL)), + + COMPOSITE(CK_MCO2, "ck_mco2", mco2_src, CLK_OPS_PARENT_ENABLE | + CLK_SET_RATE_NO_REPARENT, + _GATE(RCC_MCO2CFGR, 12, 0), + _MUX(RCC_MCO2CFGR, 0, 3, 0), + _DIV(RCC_MCO2CFGR, 4, 4, 0, NULL)), + + /* Debug clocks */ + GATE(CK_DBG, "ck_sys_dbg", "ck_axi", CLK_IGNORE_UNUSED, + RCC_DBGCFGR, 8, 0), + + COMPOSITE(CK_TRACE, "ck_trace", ck_trace_src, CLK_OPS_PARENT_ENABLE, + _GATE(RCC_DBGCFGR, 9, 0), + _NO_MUX, + _DIV(RCC_DBGCFGR, 0, 3, 0, ck_trace_div_table)), +}; + +struct stm32_clock_match_data { + const struct clock_config *cfg; + unsigned int num; + unsigned int maxbinding; +}; + +static struct stm32_clock_match_data stm32mp1_data = { + .cfg = stm32mp1_clock_cfg, + .num = ARRAY_SIZE(stm32mp1_clock_cfg), + .maxbinding = STM32MP1_LAST_CLK, +}; + +static const struct of_device_id stm32mp1_match_data[] = { + { + .compatible = "st,stm32mp1-rcc", + .data = &stm32mp1_data, + }, + { } +}; + +static int stm32_register_hw_clk(struct clk_onecell_data *clk_data, + void __iomem *base, + const struct clock_config *cfg) +{ + struct clk *clk = ERR_PTR(-ENOENT); + + if (cfg->func) + clk = (*cfg->func)(base, cfg); + + if (IS_ERR(clk)) { + pr_err("Unable to register %s\n", cfg->name); + return PTR_ERR(clk); + } + + if (cfg->id != NO_ID) + clk_data->clks[cfg->id] = clk; + + return 0; +} + +static int stm32_rcc_init(struct device_node *np, + void __iomem *base, + const struct of_device_id *match_data) +{ + struct clk_onecell_data *clk_data; + struct clk **clks; + const struct of_device_id *match; + const struct stm32_clock_match_data *data; + int err, n, max_binding; + + match = of_match_node(match_data, np); + if (!match) { + pr_err("%s: match data not found\n", __func__); + return -ENODEV; + } + + data = match->data; + + max_binding = data->maxbinding; + + clk_data = xzalloc(sizeof(*clk_data)); + clk_data->clks = xzalloc(sizeof(void *) * max_binding); + clk_data->clk_num = max_binding; + + clks = clk_data->clks; + + for (n = 0; n < max_binding; n++) + clks[n] = ERR_PTR(-ENOENT); + + for (n = 0; n < data->num; n++) { + err = stm32_register_hw_clk(clk_data, base, + &data->cfg[n]); + if (err) { + pr_err("%s: can't register %s\n", __func__, + data->cfg[n].name); + + kfree(clk_data); + + return err; + } + } + + return of_clk_add_provider(np, of_clk_src_onecell_get, clk_data); +} + +static void stm32mp1_rcc_init(struct device_node *np) +{ + void __iomem *base; + + base = of_iomap(np, 0); + if (!base) { + pr_err("%pOFn: unable to map resource", np); + return; + } + + stm32_rcc_init(np, base, stm32mp1_match_data); +} + +CLK_OF_DECLARE_DRIVER(stm32mp1_rcc, "st,stm32mp1-rcc", stm32mp1_rcc_init); diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c index 6a2d8ad178..ea3304bc7c 100644 --- a/drivers/clk/clk.c +++ b/drivers/clk/clk.c @@ -87,6 +87,9 @@ void clk_disable(struct clk *clk) clk->enable_count--; if (!clk->enable_count) { + if (clk->flags & CLK_IS_CRITICAL) + return; + if (clk->ops->disable) clk->ops->disable(clk); diff --git a/drivers/clk/imx/clk-vf610.c b/drivers/clk/imx/clk-vf610.c index 49d66fb592..1b1b881052 100644 --- a/drivers/clk/imx/clk-vf610.c +++ b/drivers/clk/imx/clk-vf610.c @@ -252,7 +252,7 @@ static void __init vf610_clocks_init(struct device_node *ccm_node) clk[VF610_CLK_IPG_BUS] = imx_clk_divider("ipg_bus", "platform_bus", CCM_CACRR, 11, 2); clk[VF610_CLK_PLL3_MAIN_DIV] = imx_clk_divider("pll3_usb_otg_div", "pll3_usb_otg", CCM_CACRR, 20, 1); - clk[VF610_CLK_PLL4_MAIN_DIV] = clk_divider_table("pll4_audio_div", "pll4_audio", CCM_CACRR, 6, 3, pll4_audio_div_table, 0); + clk[VF610_CLK_PLL4_MAIN_DIV] = clk_divider_table("pll4_audio_div", "pll4_audio", 0, CCM_CACRR, 6, 3, pll4_audio_div_table, 0); clk[VF610_CLK_PLL6_MAIN_DIV] = imx_clk_divider("pll6_video_div", "pll6_video", CCM_CACRR, 21, 1); clk[VF610_CLK_DDRMC] = imx_clk_gate2_cgr("ddrmc", "ddr_sel", CCM_CCGR6, CCM_CCGRx_CGn(14), 0x2); diff --git a/drivers/clk/imx/clk.h b/drivers/clk/imx/clk.h index 945671cbad..875c76a8b3 100644 --- a/drivers/clk/imx/clk.h +++ b/drivers/clk/imx/clk.h @@ -7,34 +7,36 @@ struct clk *clk_gate2(const char *name, const char *parent, void __iomem *reg, static inline struct clk *imx_clk_divider(const char *name, const char *parent, void __iomem *reg, u8 shift, u8 width) { - return clk_divider(name, parent, reg, shift, width, CLK_SET_RATE_PARENT); + return clk_divider(name, parent, CLK_SET_RATE_PARENT, reg, shift, width, + 0); } static inline struct clk *imx_clk_divider_flags(const char *name, const char *parent, void __iomem *reg, u8 shift, u8 width, unsigned long flags) { - return clk_divider(name, parent, reg, shift, width, flags); + return clk_divider(name, parent, flags, reg, shift, width, 0); } static inline struct clk *imx_clk_divider_np(const char *name, const char *parent, void __iomem *reg, u8 shift, u8 width) { - return clk_divider(name, parent, reg, shift, width, 0); + return clk_divider(name, parent, 0, reg, shift, width, 0); } static inline struct clk *imx_clk_divider2(const char *name, const char *parent, void __iomem *reg, u8 shift, u8 width) { - return clk_divider(name, parent, reg, shift, width, CLK_OPS_PARENT_ENABLE); + return clk_divider(name, parent, CLK_OPS_PARENT_ENABLE, reg, shift, + width, 0); } static inline struct clk *imx_clk_divider_table(const char *name, const char *parent, void __iomem *reg, u8 shift, u8 width, const struct clk_div_table *table) { - return clk_divider_table(name, parent, reg, shift, width, table, - CLK_SET_RATE_PARENT); + return clk_divider_table(name, parent, CLK_SET_RATE_PARENT, reg, shift, + width, table, 0); } static inline struct clk *imx_clk_fixed_factor(const char *name, @@ -46,35 +48,38 @@ static inline struct clk *imx_clk_fixed_factor(const char *name, static inline struct clk *imx_clk_mux_flags(const char *name, void __iomem *reg, u8 shift, u8 width, const char **parents, u8 num_parents, - unsigned long flags) + unsigned long clk_flags) { - return clk_mux(name, reg, shift, width, parents, num_parents, flags); + return clk_mux(name, clk_flags, reg, shift, width, parents, num_parents, + 0); } static inline struct clk *imx_clk_mux2_flags(const char *name, void __iomem *reg, u8 shift, u8 width, const char **parents, - int num_parents, unsigned long flags) + int num_parents, unsigned long clk_flags) { - return clk_mux(name, reg, shift, width, parents, num_parents, - flags | CLK_OPS_PARENT_ENABLE); + return clk_mux(name, clk_flags | CLK_OPS_PARENT_ENABLE, reg, shift, + width, parents, num_parents, 0); } static inline struct clk *imx_clk_mux(const char *name, void __iomem *reg, u8 shift, u8 width, const char **parents, u8 num_parents) { - return clk_mux(name, reg, shift, width, parents, num_parents, 0); + return clk_mux(name, 0, reg, shift, width, parents, num_parents, 0); } static inline struct clk *imx_clk_mux2(const char *name, void __iomem *reg, u8 shift, u8 width, const char **parents, u8 num_parents) { - return clk_mux(name, reg, shift, width, parents, num_parents, CLK_OPS_PARENT_ENABLE); + return clk_mux(name, CLK_OPS_PARENT_ENABLE, reg, shift, width, parents, + num_parents, 0); } static inline struct clk *imx_clk_mux_p(const char *name, void __iomem *reg, u8 shift, u8 width, const char **parents, u8 num_parents) { - return clk_mux(name, reg, shift, width, parents, num_parents, CLK_SET_RATE_PARENT); + return clk_mux(name, CLK_SET_RATE_PARENT, reg, shift, width, parents, + num_parents, 0); } static inline struct clk *imx_clk_gate(const char *name, const char *parent, diff --git a/drivers/clk/mxs/clk.h b/drivers/clk/mxs/clk.h index 7bab7b5e6e..00895de507 100644 --- a/drivers/clk/mxs/clk.h +++ b/drivers/clk/mxs/clk.h @@ -40,7 +40,7 @@ static inline struct clk *mxs_clk_gate(const char *name, static inline struct clk *mxs_clk_mux(const char *name, void __iomem *reg, u8 shift, u8 width, const char **parent_names, int num_parents) { - return clk_mux(name, reg, shift, width, parent_names, num_parents, 0); + return clk_mux(name, 0, reg, shift, width, parent_names, num_parents, 0); } static inline struct clk *mxs_clk_fixed_factor(const char *name, diff --git a/drivers/clk/rockchip/clk-pll.c b/drivers/clk/rockchip/clk-pll.c index 87a3969c28..39ccf0a226 100644 --- a/drivers/clk/rockchip/clk-pll.c +++ b/drivers/clk/rockchip/clk-pll.c @@ -352,7 +352,8 @@ struct clk *rockchip_clk_register_pll(enum rockchip_pll_type pll_type, pll_parents[1] = pll->pll_name; pll_parents[2] = parent_names[1]; - pll_mux = clk_mux_alloc(name, base + mode_offset, mode_shift, PLL_MODE_MASK, pll_parents, 3, CLK_SET_RATE_PARENT); + pll_mux = clk_mux_alloc(name, CLK_SET_RATE_PARENT, base + mode_offset, mode_shift, + PLL_MODE_MASK, pll_parents, 3, 0); pll->pll_mux_ops = pll_mux->ops; mux_clk = pll_mux; diff --git a/drivers/clk/rockchip/clk-rk3188.c b/drivers/clk/rockchip/clk-rk3188.c index 7dda2963e3..9340739945 100644 --- a/drivers/clk/rockchip/clk-rk3188.c +++ b/drivers/clk/rockchip/clk-rk3188.c @@ -25,9 +25,6 @@ #define RK3066_GRF_SOC_STATUS 0x15c #define RK3188_GRF_SOC_STATUS 0xac -#define CLK_SET_RATE_NO_REPARENT 0 -#define CLK_DIVIDER_READ_ONLY 0 - enum rk3188_plls { apll, cpll, dpll, gpll, }; diff --git a/drivers/clk/rockchip/clk-rk3288.c b/drivers/clk/rockchip/clk-rk3288.c index bb111e1e0b..dcfaae2407 100644 --- a/drivers/clk/rockchip/clk-rk3288.c +++ b/drivers/clk/rockchip/clk-rk3288.c @@ -25,9 +25,6 @@ #define RK3288_GRF_SOC_CON(x) (0x244 + x * 4) #define RK3288_GRF_SOC_STATUS1 0x284 -#define CLK_SET_RATE_NO_REPARENT 0 -#define CLK_DIVIDER_READ_ONLY 0 - enum rk3288_plls { apll, dpll, cpll, gpll, npll, }; diff --git a/drivers/clk/rockchip/clk.c b/drivers/clk/rockchip/clk.c index 3222a4e09e..9e0cbadd57 100644 --- a/drivers/clk/rockchip/clk.c +++ b/drivers/clk/rockchip/clk.c @@ -50,7 +50,7 @@ static struct clk *rockchip_clk_register_branch(const char *name, struct clk *div = NULL; if (num_parents > 1) { - mux = clk_mux_alloc(name, base + muxdiv_offset, mux_shift, + mux = clk_mux_alloc(name, 0, base + muxdiv_offset, mux_shift, mux_width, parent_names, num_parents, mux_flags); if (!mux) return ERR_PTR(-ENOMEM); @@ -64,7 +64,7 @@ static struct clk *rockchip_clk_register_branch(const char *name, } if (div_width > 0) { - div = clk_divider_alloc(name, *parent_names, + div = clk_divider_alloc(name, *parent_names, 0, base + muxdiv_offset, div_shift, div_width, div_flags); if (!div) return ERR_PTR(-ENOMEM); @@ -176,25 +176,21 @@ void __init rockchip_clk_register_branches( /* catch simple muxes */ switch (list->branch_type) { case branch_mux: - /* - * mux_flags and flags are ored, this is safe, - * since there is no value clash, but isn't that elegant - */ - clk = clk_mux(list->name, + clk = clk_mux(list->name, flags, reg_base + list->muxdiv_offset, list->mux_shift, list->mux_width, list->parent_names, - list->num_parents, list->mux_flags | flags); + list->num_parents, list->mux_flags); break; case branch_divider: if (list->div_table) clk = clk_divider_table(list->name, - list->parent_names[0], + list->parent_names[0], flags, reg_base + list->muxdiv_offset, list->div_shift, list->div_width, list->div_table, list->div_flags); else clk = clk_divider(list->name, - list->parent_names[0], + list->parent_names[0], flags, reg_base + list->muxdiv_offset, list->div_shift, list->div_width, list->div_flags); diff --git a/drivers/clk/rockchip/clk.h b/drivers/clk/rockchip/clk.h index aa52638f70..d6798a9055 100644 --- a/drivers/clk/rockchip/clk.h +++ b/drivers/clk/rockchip/clk.h @@ -27,7 +27,6 @@ #include <linux/clk.h> /* To keep changes from kernel smaller */ -#define CLK_IGNORE_UNUSED 0 #define CLK_GATE_SET_TO_DISABLE CLK_GATE_INVERTED #define CLK_GET_RATE_NOCACHE 0 diff --git a/drivers/clk/tegra/clk-periph.c b/drivers/clk/tegra/clk-periph.c index fd1e2ed2c6..b4182861e7 100644 --- a/drivers/clk/tegra/clk-periph.c +++ b/drivers/clk/tegra/clk-periph.c @@ -123,7 +123,7 @@ static struct clk *_tegra_clk_register_periph(const char *name, goto out_periph; } - periph->mux = clk_mux_alloc(NULL, clk_base + reg_offset, 32 - mux_size, + periph->mux = clk_mux_alloc(NULL, 0, clk_base + reg_offset, 32 - mux_size, mux_size, parent_names, num_parents, 0); if (!periph->mux) goto out_mux; diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig index b0502c3036..43c5bfc973 100644 --- a/drivers/clocksource/Kconfig +++ b/drivers/clocksource/Kconfig @@ -73,7 +73,7 @@ config CLOCKSOURCE_ATMEL_PIT config CLOCKSOURCE_ARMV8_TIMER bool default y - depends on ARM && CPU_64v8 + depends on ARM && (CPU_64v8 || CPU_V7) config CLOCKSOURCE_ARM_GLOBAL_TIMER bool diff --git a/drivers/clocksource/armv8-timer.c b/drivers/clocksource/armv8-timer.c index 918232e0e0..3095f8cfc4 100644 --- a/drivers/clocksource/armv8-timer.c +++ b/drivers/clocksource/armv8-timer.c @@ -39,6 +39,7 @@ static int armv8_timer_probe(struct device_d *dev) } static struct of_device_id armv8_timer_dt_ids[] = { + { .compatible = "arm,armv7-timer", }, { .compatible = "arm,armv8-timer", }, { } }; diff --git a/drivers/crypto/Kconfig b/drivers/crypto/Kconfig index d1687e3774..b2709f00f8 100644 --- a/drivers/crypto/Kconfig +++ b/drivers/crypto/Kconfig @@ -4,6 +4,6 @@ menuconfig CRYPTO_HW if CRYPTO_HW -source drivers/crypto/caam/Kconfig +source "drivers/crypto/caam/Kconfig" endif diff --git a/drivers/ddr/Kconfig b/drivers/ddr/Kconfig new file mode 100644 index 0000000000..4ea71598af --- /dev/null +++ b/drivers/ddr/Kconfig @@ -0,0 +1 @@ +source "drivers/ddr/fsl/Kconfig" diff --git a/drivers/ddr/Makefile b/drivers/ddr/Makefile new file mode 100644 index 0000000000..faf2f9e1d6 --- /dev/null +++ b/drivers/ddr/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_DDR_FSL) += fsl/ diff --git a/drivers/ddr/fsl/Kconfig b/drivers/ddr/fsl/Kconfig new file mode 100644 index 0000000000..9cae9028a2 --- /dev/null +++ b/drivers/ddr/fsl/Kconfig @@ -0,0 +1,16 @@ +config DDR_FSL + bool + +if DDR_FSL + +config DDR_FSL_DDR1 + bool "Enable DDR1 support" +config DDR_FSL_DDR2 + bool "Enable DDR2 support" +config DDR_FSL_DDR3 + bool "Enable DDR3 support" +config DDR_FSL_DDR4 + bool "Enable DDR4 support" + +endif + diff --git a/drivers/ddr/fsl/Makefile b/drivers/ddr/fsl/Makefile new file mode 100644 index 0000000000..86ac4b820a --- /dev/null +++ b/drivers/ddr/fsl/Makefile @@ -0,0 +1,12 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# Copyright 2008-2014 Freescale Semiconductor, Inc. + +pbl-y += main.o util.o ctrl_regs.o options.o lc_common_dimm_params.o + +pbl-y += ddr1_dimm_params.o +pbl-y += ddr2_dimm_params.o +pbl-y += ddr3_dimm_params.o +pbl-y += ddr4_dimm_params.o +obj-y += arm_ddr_gen3.o +pbl-y += fsl_ddr_gen4.o diff --git a/drivers/ddr/fsl/arm_ddr_gen3.c b/drivers/ddr/fsl/arm_ddr_gen3.c new file mode 100644 index 0000000000..c016917a3f --- /dev/null +++ b/drivers/ddr/fsl/arm_ddr_gen3.c @@ -0,0 +1,204 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * Derived from mpc85xx_ddr_gen3.c, removed all workarounds + */ + +#include <common.h> +#include <asm/io.h> +#include <soc/fsl/fsl_ddr_sdram.h> +#include <soc/fsl/fsl_immap.h> +#include <soc/fsl/immap_lsch2.h> +#include "fsl_ddr.h" + +/* + * regs has the to-be-set values for DDR controller registers + * ctrl_num is the DDR controller number + * step: 0 goes through the initialization in one pass + * 1 sets registers and returns before enabling controller + * 2 resumes from step 1 and continues to initialize + * Dividing the initialization to two steps to deassert DDR reset signal + * to comply with JEDEC specs for RDIMMs. + */ +void fsl_ddr_set_memctl_regs(struct fsl_ddr_controller *c, int step) +{ + struct ccsr_ddr __iomem *ddr = c->base; + const fsl_ddr_cfg_regs_t *regs = &c->fsl_ddr_config_reg; + unsigned int i, bus_width; + u32 temp_sdram_cfg; + u32 total_gb_size_per_controller; + int timeout; + + if (step == 2) + goto step2; + + if (regs->ddr_eor) + ddr_out32(&ddr->eor, regs->ddr_eor); + for (i = 0; i < c->chip_selects_per_ctrl; i++) { + if (i == 0) { + ddr_out32(&ddr->cs0_bnds, regs->cs[i].bnds); + ddr_out32(&ddr->cs0_config, regs->cs[i].config); + ddr_out32(&ddr->cs0_config_2, regs->cs[i].config_2); + + } else if (i == 1) { + ddr_out32(&ddr->cs1_bnds, regs->cs[i].bnds); + ddr_out32(&ddr->cs1_config, regs->cs[i].config); + ddr_out32(&ddr->cs1_config_2, regs->cs[i].config_2); + + } else if (i == 2) { + ddr_out32(&ddr->cs2_bnds, regs->cs[i].bnds); + ddr_out32(&ddr->cs2_config, regs->cs[i].config); + ddr_out32(&ddr->cs2_config_2, regs->cs[i].config_2); + + } else if (i == 3) { + ddr_out32(&ddr->cs3_bnds, regs->cs[i].bnds); + ddr_out32(&ddr->cs3_config, regs->cs[i].config); + ddr_out32(&ddr->cs3_config_2, regs->cs[i].config_2); + } + } + + ddr_out32(&ddr->timing_cfg_3, regs->timing_cfg_3); + ddr_out32(&ddr->timing_cfg_0, regs->timing_cfg_0); + ddr_out32(&ddr->timing_cfg_1, regs->timing_cfg_1); + ddr_out32(&ddr->timing_cfg_2, regs->timing_cfg_2); + ddr_out32(&ddr->sdram_mode, regs->ddr_sdram_mode); + ddr_out32(&ddr->sdram_mode_2, regs->ddr_sdram_mode_2); + ddr_out32(&ddr->sdram_mode_3, regs->ddr_sdram_mode_3); + ddr_out32(&ddr->sdram_mode_4, regs->ddr_sdram_mode_4); + ddr_out32(&ddr->sdram_mode_5, regs->ddr_sdram_mode_5); + ddr_out32(&ddr->sdram_mode_6, regs->ddr_sdram_mode_6); + ddr_out32(&ddr->sdram_mode_7, regs->ddr_sdram_mode_7); + ddr_out32(&ddr->sdram_mode_8, regs->ddr_sdram_mode_8); + ddr_out32(&ddr->sdram_md_cntl, regs->ddr_sdram_md_cntl); + ddr_out32(&ddr->sdram_interval, regs->ddr_sdram_interval); + ddr_out32(&ddr->sdram_data_init, regs->ddr_data_init); + ddr_out32(&ddr->sdram_clk_cntl, regs->ddr_sdram_clk_cntl); + ddr_out32(&ddr->timing_cfg_4, regs->timing_cfg_4); + ddr_out32(&ddr->timing_cfg_5, regs->timing_cfg_5); + ddr_out32(&ddr->ddr_zq_cntl, regs->ddr_zq_cntl); + ddr_out32(&ddr->ddr_wrlvl_cntl, regs->ddr_wrlvl_cntl); + if (regs->ddr_wrlvl_cntl_2) + ddr_out32(&ddr->ddr_wrlvl_cntl_2, regs->ddr_wrlvl_cntl_2); + if (regs->ddr_wrlvl_cntl_3) + ddr_out32(&ddr->ddr_wrlvl_cntl_3, regs->ddr_wrlvl_cntl_3); + + ddr_out32(&ddr->ddr_sr_cntr, regs->ddr_sr_cntr); + ddr_out32(&ddr->ddr_sdram_rcw_1, regs->ddr_sdram_rcw_1); + ddr_out32(&ddr->ddr_sdram_rcw_2, regs->ddr_sdram_rcw_2); + ddr_out32(&ddr->ddr_cdr1, regs->ddr_cdr1); + + if (is_warm_boot()) { + ddr_out32(&ddr->sdram_cfg_2, + regs->ddr_sdram_cfg_2 & ~SDRAM_CFG2_D_INIT); + ddr_out32(&ddr->init_addr, c->common_timing_params.base_address); + ddr_out32(&ddr->init_ext_addr, DDR_INIT_ADDR_EXT_UIA); + + /* DRAM VRef will not be trained */ + ddr_out32(&ddr->ddr_cdr2, + regs->ddr_cdr2 & ~DDR_CDR2_VREF_TRAIN_EN); + } else { + ddr_out32(&ddr->sdram_cfg_2, regs->ddr_sdram_cfg_2); + ddr_out32(&ddr->init_addr, regs->ddr_init_addr); + ddr_out32(&ddr->init_ext_addr, regs->ddr_init_ext_addr); + ddr_out32(&ddr->ddr_cdr2, regs->ddr_cdr2); + } + ddr_out32(&ddr->err_disable, regs->err_disable); + ddr_out32(&ddr->err_int_en, regs->err_int_en); + for (i = 0; i < 32; i++) { + if (regs->debug[i]) { + debug("Write to debug_%d as %08x\n", i + 1, + regs->debug[i]); + ddr_out32(&ddr->debug[i], regs->debug[i]); + } + } + + /* + * For RDIMMs, JEDEC spec requires clocks to be stable before reset is + * deasserted. Clocks start when any chip select is enabled and clock + * control register is set. Because all DDR components are connected to + * one reset signal, this needs to be done in two steps. Step 1 is to + * get the clocks started. Step 2 resumes after reset signal is + * deasserted. + */ + if (step == 1) { + udelay(200); + return; + } + +step2: + /* Set, but do not enable the memory */ + temp_sdram_cfg = regs->ddr_sdram_cfg; + temp_sdram_cfg &= ~(SDRAM_CFG_MEM_EN); + ddr_out32(&ddr->sdram_cfg, temp_sdram_cfg); + + /* + * 500 painful micro-seconds must elapse between + * the DDR clock setup and the DDR config enable. + * DDR2 need 200 us, and DDR3 need 500 us from spec, + * we choose the max, that is 500 us for all of case. + */ + udelay(500); + asm volatile("dsb sy;isb"); + + if (is_warm_boot()) { + /* enter self-refresh */ + temp_sdram_cfg = ddr_in32(&ddr->sdram_cfg_2); + temp_sdram_cfg |= SDRAM_CFG2_FRC_SR; + ddr_out32(&ddr->sdram_cfg_2, temp_sdram_cfg); + + temp_sdram_cfg = (ddr_in32(&ddr->sdram_cfg) | SDRAM_CFG_BI); + } else { + temp_sdram_cfg = ddr_in32(&ddr->sdram_cfg) & ~SDRAM_CFG_BI; + } + /* Let the controller go */ + ddr_out32(&ddr->sdram_cfg, temp_sdram_cfg | SDRAM_CFG_MEM_EN); + asm volatile("dsb sy;isb"); + + total_gb_size_per_controller = 0; + for (i = 0; i < c->chip_selects_per_ctrl; i++) { + if (!(regs->cs[i].config & 0x80000000)) + continue; + total_gb_size_per_controller += 1 << ( + ((regs->cs[i].config >> 14) & 0x3) + 2 + + ((regs->cs[i].config >> 8) & 0x7) + 12 + + ((regs->cs[i].config >> 0) & 0x7) + 8 + + 3 - ((regs->ddr_sdram_cfg >> 19) & 0x3) - + 26); /* minus 26 (count of 64M) */ + } + if (regs->cs[0].config & 0x20000000) { + /* 2-way interleaving */ + total_gb_size_per_controller <<= 1; + } + /* + * total memory / bus width = transactions needed + * transactions needed / data rate = seconds + * to add plenty of buffer, double the time + * For example, 2GB on 666MT/s 64-bit bus takes about 402ms + * Let's wait for 800ms + */ + bus_width = 3 - ((ddr_in32(&ddr->sdram_cfg) & SDRAM_CFG_DBW_MASK) + >> SDRAM_CFG_DBW_SHIFT); + timeout = ((total_gb_size_per_controller << (6 - bus_width)) * 100 / + (c->ddr_freq >> 20)) << 1; + total_gb_size_per_controller >>= 4; /* shift down to gb size */ + debug("total %d GB\n", total_gb_size_per_controller); + debug("Need to wait up to %d * 10ms\n", timeout); + + /* Poll DDR_SDRAM_CFG_2[D_INIT] bit until auto-data init is done. */ + while ((ddr_in32(&ddr->sdram_cfg_2) & SDRAM_CFG2_D_INIT) && + (timeout >= 0)) { + udelay(10000); /* throttle polling rate */ + timeout--; + } + + if (timeout <= 0) + printf("Waiting for D_INIT timeout. Memory may not work.\n"); + + if (is_warm_boot()) { + /* exit self-refresh */ + temp_sdram_cfg = ddr_in32(&ddr->sdram_cfg_2); + temp_sdram_cfg &= ~SDRAM_CFG2_FRC_SR; + ddr_out32(&ddr->sdram_cfg_2, temp_sdram_cfg); + } +} diff --git a/drivers/ddr/fsl/ctrl_regs.c b/drivers/ddr/fsl/ctrl_regs.c new file mode 100644 index 0000000000..4957320d60 --- /dev/null +++ b/drivers/ddr/fsl/ctrl_regs.c @@ -0,0 +1,2539 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2008-2016 Freescale Semiconductor, Inc. + * Copyright 2017-2018 NXP Semiconductor + */ + +/* + * Generic driver for Freescale DDR/DDR2/DDR3/DDR4 memory controller. + * Based on code from spd_sdram.c + * Author: James Yang [at freescale.com] + */ +#include <common.h> +#include <soc/fsl/fsl_ddr_sdram.h> +#include <soc/fsl/fsl_immap.h> +#include <io.h> +#include <soc/fsl/immap_lsch2.h> +#include <linux/log2.h> +#include "fsl_ddr.h" + +/* + * Determine Rtt value. + * + * This should likely be either board or controller specific. + * + * Rtt(nominal) - DDR2: + * 0 = Rtt disabled + * 1 = 75 ohm + * 2 = 150 ohm + * 3 = 50 ohm + * Rtt(nominal) - DDR3: + * 0 = Rtt disabled + * 1 = 60 ohm + * 2 = 120 ohm + * 3 = 40 ohm + * 4 = 20 ohm + * 5 = 30 ohm + * + */ +static inline int fsl_ddr_get_rtt(const memctl_options_t *popts) +{ + if (is_ddr2(popts)) + return 3; + else + return 0; +} + +/* + * compute CAS write latency according to DDR4 spec + * CWL = 9 for <= 1600MT/s + * 10 for <= 1866MT/s + * 11 for <= 2133MT/s + * 12 for <= 2400MT/s + * 14 for <= 2667MT/s + * 16 for <= 2933MT/s + * 18 for higher + */ +static inline unsigned int compute_cas_write_latency_ddr4(struct fsl_ddr_controller *c) +{ + unsigned int cwl; + const unsigned int mclk_ps = get_memory_clk_period_ps(c); + if (mclk_ps >= 1250) + cwl = 9; + else if (mclk_ps >= 1070) + cwl = 10; + else if (mclk_ps >= 935) + cwl = 11; + else if (mclk_ps >= 833) + cwl = 12; + else if (mclk_ps >= 750) + cwl = 14; + else if (mclk_ps >= 681) + cwl = 16; + else + cwl = 18; + + return cwl; +} + +/* + * compute the CAS write latency according to DDR3 spec + * CWL = 5 if tCK >= 2.5ns + * 6 if 2.5ns > tCK >= 1.875ns + * 7 if 1.875ns > tCK >= 1.5ns + * 8 if 1.5ns > tCK >= 1.25ns + * 9 if 1.25ns > tCK >= 1.07ns + * 10 if 1.07ns > tCK >= 0.935ns + * 11 if 0.935ns > tCK >= 0.833ns + * 12 if 0.833ns > tCK >= 0.75ns + */ +static inline unsigned int compute_cas_write_latency_ddr3(struct fsl_ddr_controller *c) +{ + unsigned int cwl; + const unsigned int mclk_ps = get_memory_clk_period_ps(c); + + if (mclk_ps >= 2500) + cwl = 5; + else if (mclk_ps >= 1875) + cwl = 6; + else if (mclk_ps >= 1500) + cwl = 7; + else if (mclk_ps >= 1250) + cwl = 8; + else if (mclk_ps >= 1070) + cwl = 9; + else if (mclk_ps >= 935) + cwl = 10; + else if (mclk_ps >= 833) + cwl = 11; + else if (mclk_ps >= 750) + cwl = 12; + else { + cwl = 12; + printf("Warning: CWL is out of range\n"); + } + return cwl; +} + +/* Chip Select Configuration (CSn_CONFIG) */ +static void set_csn_config(int dimm_number, int i, fsl_ddr_cfg_regs_t *ddr, + const memctl_options_t *popts, + const struct dimm_params *dimm_params) +{ + unsigned int cs_n_en = 0; /* Chip Select enable */ + unsigned int intlv_en = 0; /* Memory controller interleave enable */ + unsigned int intlv_ctl = 0; /* Interleaving control */ + unsigned int ap_n_en = 0; /* Chip select n auto-precharge enable */ + unsigned int odt_rd_cfg = 0; /* ODT for reads configuration */ + unsigned int odt_wr_cfg = 0; /* ODT for writes configuration */ + unsigned int ba_bits_cs_n = 0; /* Num of bank bits for SDRAM on CSn */ + unsigned int row_bits_cs_n = 0; /* Num of row bits for SDRAM on CSn */ + unsigned int col_bits_cs_n = 0; /* Num of ocl bits for SDRAM on CSn */ + int go_config = 0; + unsigned int bg_bits_cs_n = 0; /* Num of bank group bits */ + unsigned int n_banks_per_sdram_device; + + /* Compute CS_CONFIG only for existing ranks of each DIMM. */ + switch (i) { + case 0: + if (dimm_params[dimm_number].n_ranks > 0) { + go_config = 1; + /* These fields only available in CS0_CONFIG */ + if (!popts->memctl_interleaving) + break; + switch (popts->memctl_interleaving_mode) { + case FSL_DDR_256B_INTERLEAVING: + case FSL_DDR_CACHE_LINE_INTERLEAVING: + case FSL_DDR_PAGE_INTERLEAVING: + case FSL_DDR_BANK_INTERLEAVING: + case FSL_DDR_SUPERBANK_INTERLEAVING: + intlv_en = popts->memctl_interleaving; + intlv_ctl = popts->memctl_interleaving_mode; + break; + default: + break; + } + } + break; + case 1: + if ((dimm_number == 0 && dimm_params[0].n_ranks > 1) || \ + (dimm_number == 1 && dimm_params[1].n_ranks > 0)) + go_config = 1; + break; + case 2: + if ((dimm_number == 0 && dimm_params[0].n_ranks > 2) || \ + (dimm_number >= 1 && dimm_params[dimm_number].n_ranks > 0)) + go_config = 1; + break; + case 3: + if ((dimm_number == 0 && dimm_params[0].n_ranks > 3) || \ + (dimm_number == 1 && dimm_params[1].n_ranks > 1) || \ + (dimm_number == 3 && dimm_params[3].n_ranks > 0)) + go_config = 1; + break; + default: + break; + } + if (go_config) { + cs_n_en = 1; + ap_n_en = popts->cs_local_opts[i].auto_precharge; + odt_rd_cfg = popts->cs_local_opts[i].odt_rd_cfg; + odt_wr_cfg = popts->cs_local_opts[i].odt_wr_cfg; + if (is_ddr4(popts)) { + ba_bits_cs_n = dimm_params[dimm_number].bank_addr_bits; + bg_bits_cs_n = dimm_params[dimm_number].bank_group_bits; + } else { + n_banks_per_sdram_device + = dimm_params[dimm_number].n_banks_per_sdram_device; + ba_bits_cs_n = ilog2(n_banks_per_sdram_device) - 2; + } + row_bits_cs_n = dimm_params[dimm_number].n_row_addr - 12; + col_bits_cs_n = dimm_params[dimm_number].n_col_addr - 8; + } + ddr->cs[i].config = (0 + | ((cs_n_en & 0x1) << 31) + | ((intlv_en & 0x3) << 29) + | ((intlv_ctl & 0xf) << 24) + | ((ap_n_en & 0x1) << 23) + + /* XXX: some implementation only have 1 bit starting at left */ + | ((odt_rd_cfg & 0x7) << 20) + + /* XXX: Some implementation only have 1 bit starting at left */ + | ((odt_wr_cfg & 0x7) << 16) + + | ((ba_bits_cs_n & 0x3) << 14) + | ((row_bits_cs_n & 0x7) << 8) + | ((bg_bits_cs_n & 0x3) << 4) + | ((col_bits_cs_n & 0x7) << 0) + ); + debug("FSLDDR: cs[%d]_config = 0x%08x\n", i,ddr->cs[i].config); +} + +/* Chip Select Configuration 2 (CSn_CONFIG_2) */ +/* FIXME: 8572 */ +static void set_csn_config_2(int i, fsl_ddr_cfg_regs_t *ddr) +{ + unsigned int pasr_cfg = 0; /* Partial array self refresh config */ + + ddr->cs[i].config_2 = ((pasr_cfg & 7) << 24); + debug("FSLDDR: cs[%d]_config_2 = 0x%08x\n", i, ddr->cs[i].config_2); +} + +/* -3E = 667 CL5, -25 = CL6 800, -25E = CL5 800 */ + +/* + * Check DIMM configuration, return 2 if quad-rank or two dual-rank + * Return 1 if other two slots configuration. Return 0 if single slot. + */ +static inline int avoid_odt_overlap(struct fsl_ddr_controller *c, + const struct dimm_params *dimm_params) +{ + if (c->dimm_slots_per_ctrl == 1) + if (dimm_params[0].n_ranks == 4) + return 2; + + if (c->dimm_slots_per_ctrl == 2) { + if ((dimm_params[0].n_ranks == 2) && + (dimm_params[1].n_ranks == 2)) + return 2; + + if ((dimm_params[0].n_ranks != 0) && + (dimm_params[2].n_ranks != 0)) + return 1; + } + + return 0; +} + +/* + * DDR SDRAM Timing Configuration 0 (TIMING_CFG_0) + * + * Avoid writing for DDR I. The new PQ38 DDR controller + * dreams up non-zero default values to be backwards compatible. + */ +static void set_timing_cfg_0(struct fsl_ddr_controller *c) +{ + fsl_ddr_cfg_regs_t *ddr = &c->fsl_ddr_config_reg; + const memctl_options_t *popts = &c->memctl_opts; + const struct dimm_params *dimm_params = c->dimm_params; + unsigned char trwt_mclk = 0; /* Read-to-write turnaround */ + unsigned char twrt_mclk = 0; /* Write-to-read turnaround */ + /* 7.5 ns on -3E; 0 means WL - CL + BL/2 + 1 */ + unsigned char trrt_mclk = 0; /* Read-to-read turnaround */ + unsigned char twwt_mclk = 0; /* Write-to-write turnaround */ + + /* Active powerdown exit timing (tXARD and tXARDS). */ + unsigned char act_pd_exit_mclk; + /* Precharge powerdown exit timing (tXP). */ + unsigned char pre_pd_exit_mclk; + /* ODT powerdown exit timing (tAXPD). */ + unsigned char taxpd_mclk = 0; + /* Mode register set cycle time (tMRD). */ + unsigned char tmrd_mclk; + const unsigned int mclk_ps = get_memory_clk_period_ps(c); + + if (is_ddr4(popts)) { + /* tXP=max(4nCK, 6ns) */ + int txp = max((int)mclk_ps * 4, 6000); /* unit=ps */ + unsigned int data_rate = c->ddr_freq; + + /* for faster clock, need more time for data setup */ + trwt_mclk = (data_rate/1000000 > 1900) ? 3 : 2; + + /* + * for single quad-rank DIMM and two-slot DIMMs + * to avoid ODT overlap + */ + switch (avoid_odt_overlap(c, dimm_params)) { + case 2: + twrt_mclk = 2; + twwt_mclk = 2; + trrt_mclk = 2; + break; + default: + twrt_mclk = 1; + twwt_mclk = 1; + trrt_mclk = 0; + break; + } + + act_pd_exit_mclk = picos_to_mclk(c, txp); + pre_pd_exit_mclk = act_pd_exit_mclk; + /* + * MRS_CYC = max(tMRD, tMOD) + * tMRD = 8nCK, tMOD = max(24nCK, 15ns) + */ + tmrd_mclk = max(24U, picos_to_mclk(c, 15000)); + } else if (is_ddr3(popts)) { + unsigned int data_rate = c->ddr_freq; + int txp; + unsigned int ip_rev; + int odt_overlap; + /* + * (tXARD and tXARDS). Empirical? + * The DDR3 spec has not tXARD, + * we use the tXP instead of it. + * tXP=max(3nCK, 7.5ns) for DDR3-800, 1066 + * max(3nCK, 6ns) for DDR3-1333, 1600, 1866, 2133 + * spec has not the tAXPD, we use + * tAXPD=1, need design to confirm. + */ + txp = max((int)mclk_ps * 3, (mclk_ps > 1540 ? 7500 : 6000)); + + ip_rev = fsl_ddr_get_version(c); + if (ip_rev >= 0x40700) { + /* + * MRS_CYC = max(tMRD, tMOD) + * tMRD = 4nCK (8nCK for RDIMM) + * tMOD = max(12nCK, 15ns) + */ + tmrd_mclk = max((unsigned int)12, picos_to_mclk(c, 15000)); + } else { + /* + * MRS_CYC = tMRD + * tMRD = 4nCK (8nCK for RDIMM) + */ + if (popts->registered_dimm_en) + tmrd_mclk = 8; + else + tmrd_mclk = 4; + } + + /* set the turnaround time */ + + /* + * for single quad-rank DIMM and two-slot DIMMs + * to avoid ODT overlap + */ + odt_overlap = avoid_odt_overlap(c, dimm_params); + switch (odt_overlap) { + case 2: + twwt_mclk = 2; + trrt_mclk = 1; + break; + case 1: + twwt_mclk = 1; + trrt_mclk = 0; + break; + default: + break; + } + + /* for faster clock, need more time for data setup */ + trwt_mclk = (data_rate/1000000 > 1800) ? 2 : 1; + + if ((data_rate/1000000 > 1150) || (popts->memctl_interleaving)) + twrt_mclk = 1; + + if (popts->dynamic_power == 0) { /* powerdown is not used */ + act_pd_exit_mclk = 1; + pre_pd_exit_mclk = 1; + taxpd_mclk = 1; + } else { + /* act_pd_exit_mclk = tXARD, see above */ + act_pd_exit_mclk = picos_to_mclk(c, txp); + /* Mode register MR0[A12] is '1' - fast exit */ + pre_pd_exit_mclk = act_pd_exit_mclk; + taxpd_mclk = 1; + } + } else if (is_ddr2(popts)) { + /* + * (tXARD and tXARDS). Empirical? + * tXARD = 2 for DDR2 + * tXP=2 + * tAXPD=8 + */ + act_pd_exit_mclk = 2; + pre_pd_exit_mclk = 2; + taxpd_mclk = 8; + tmrd_mclk = 2; + } else { + return; + } + + if (popts->trwt_override) + trwt_mclk = popts->trwt; + + ddr->timing_cfg_0 = (0 + | ((trwt_mclk & 0x3) << 30) /* RWT */ + | ((twrt_mclk & 0x3) << 28) /* WRT */ + | ((trrt_mclk & 0x3) << 26) /* RRT */ + | ((twwt_mclk & 0x3) << 24) /* WWT */ + | ((act_pd_exit_mclk & 0xf) << 20) /* ACT_PD_EXIT */ + | ((pre_pd_exit_mclk & 0xF) << 16) /* PRE_PD_EXIT */ + | ((taxpd_mclk & 0xf) << 8) /* ODT_PD_EXIT */ + | ((tmrd_mclk & 0x1f) << 0) /* MRS_CYC */ + ); + debug("FSLDDR: timing_cfg_0 = 0x%08x\n", ddr->timing_cfg_0); +} + +/* DDR SDRAM Timing Configuration 3 (TIMING_CFG_3) */ +static void set_timing_cfg_3(struct fsl_ddr_controller *c, + unsigned int cas_latency, + unsigned int additive_latency) +{ + fsl_ddr_cfg_regs_t *ddr = &c->fsl_ddr_config_reg; + const memctl_options_t *popts = &c->memctl_opts; + const struct common_timing_params *common_dimm = &c->common_timing_params; + /* Extended precharge to activate interval (tRP) */ + unsigned int ext_pretoact = 0; + /* Extended Activate to precharge interval (tRAS) */ + unsigned int ext_acttopre = 0; + /* Extended activate to read/write interval (tRCD) */ + unsigned int ext_acttorw = 0; + /* Extended refresh recovery time (tRFC) */ + unsigned int ext_refrec; + /* Extended MCAS latency from READ cmd */ + unsigned int ext_caslat = 0; + /* Extended additive latency */ + unsigned int ext_add_lat = 0; + /* Extended last data to precharge interval (tWR) */ + unsigned int ext_wrrec = 0; + /* Control Adjust */ + unsigned int cntl_adj = 0; + + ext_pretoact = picos_to_mclk(c, common_dimm->trp_ps) >> 4; + ext_acttopre = picos_to_mclk(c, common_dimm->tras_ps) >> 4; + ext_acttorw = picos_to_mclk(c, common_dimm->trcd_ps) >> 4; + ext_caslat = (2 * cas_latency - 1) >> 4; + ext_add_lat = additive_latency >> 4; + + if (is_ddr4(popts)) + ext_refrec = (picos_to_mclk(c, common_dimm->trfc1_ps) - 8) >> 4; + else + ext_refrec = (picos_to_mclk(c, common_dimm->trfc_ps) - 8) >> 4; + /* ext_wrrec only deals with 16 clock and above, or 14 with OTF */ + + ext_wrrec = (picos_to_mclk(c, common_dimm->twr_ps) + + (popts->otf_burst_chop_en ? 2 : 0)) >> 4; + + ddr->timing_cfg_3 = (0 + | ((ext_pretoact & 0x1) << 28) + | ((ext_acttopre & 0x3) << 24) + | ((ext_acttorw & 0x1) << 22) + | ((ext_refrec & 0x3F) << 16) + | ((ext_caslat & 0x3) << 12) + | ((ext_add_lat & 0x1) << 10) + | ((ext_wrrec & 0x1) << 8) + | ((cntl_adj & 0x7) << 0) + ); + debug("FSLDDR: timing_cfg_3 = 0x%08x\n", ddr->timing_cfg_3); +} + +/* DDR SDRAM Timing Configuration 1 (TIMING_CFG_1) */ +static void set_timing_cfg_1(struct fsl_ddr_controller *c, unsigned int cas_latency) +{ + fsl_ddr_cfg_regs_t *ddr = &c->fsl_ddr_config_reg; + const memctl_options_t *popts = &c->memctl_opts; + const struct common_timing_params *common_dimm = &c->common_timing_params; + /* Precharge-to-activate interval (tRP) */ + unsigned char pretoact_mclk; + /* Activate to precharge interval (tRAS) */ + unsigned char acttopre_mclk; + /* Activate to read/write interval (tRCD) */ + unsigned char acttorw_mclk; + /* CASLAT */ + unsigned char caslat_ctrl; + /* Refresh recovery time (tRFC) ; trfc_low */ + unsigned char refrec_ctrl; + /* Last data to precharge minimum interval (tWR) */ + unsigned char wrrec_mclk; + /* Activate-to-activate interval (tRRD) */ + unsigned char acttoact_mclk; + /* Last write data pair to read command issue interval (tWTR) */ + unsigned char wrtord_mclk; + + pretoact_mclk = picos_to_mclk(c, common_dimm->trp_ps); + acttopre_mclk = picos_to_mclk(c, common_dimm->tras_ps); + acttorw_mclk = picos_to_mclk(c, common_dimm->trcd_ps); + + /* + * Translate CAS Latency to a DDR controller field value: + * + * CAS Lat DDR I DDR II Ctrl + * Clocks SPD Bit SPD Bit Value + * ------- ------- ------- ----- + * 1.0 0 0001 + * 1.5 1 0010 + * 2.0 2 2 0011 + * 2.5 3 0100 + * 3.0 4 3 0101 + * 3.5 5 0110 + * 4.0 4 0111 + * 4.5 1000 + * 5.0 5 1001 + */ + if (is_ddr1(popts)) { + caslat_ctrl = (cas_latency + 1) & 0x07; + } else if (is_ddr2(popts)) { + caslat_ctrl = 2 * cas_latency - 1; + } else { + /* + * if the CAS latency more than 8 cycle, + * we need set extend bit for it at + * TIMING_CFG_3[EXT_CASLAT] + */ + if (fsl_ddr_get_version(c) <= 0x40400) + caslat_ctrl = 2 * cas_latency - 1; + else + caslat_ctrl = (cas_latency - 1) << 1; + } + + if (is_ddr4(popts)) { + /* DDR4 supports 10, 12, 14, 16, 18, 20, 24 */ + static const u8 wrrec_table[] = { + 10, 10, 10, 10, 10, + 10, 10, 10, 10, 10, + 12, 12, 14, 14, 16, + 16, 18, 18, 20, 20, + 24, 24, 24, 24 + }; + + refrec_ctrl = picos_to_mclk(c, common_dimm->trfc1_ps) - 8; + wrrec_mclk = picos_to_mclk(c, common_dimm->twr_ps); + acttoact_mclk = max(picos_to_mclk(c, common_dimm->trrds_ps), 4U); + wrtord_mclk = max(2U, picos_to_mclk(c, 2500)); + if ((wrrec_mclk < 1) || (wrrec_mclk > 24)) + printf("Error: WRREC doesn't support %d clocks\n", wrrec_mclk); + else + wrrec_mclk = wrrec_table[wrrec_mclk - 1]; + } else { + /* DDR_SDRAM_MODE doesn't support 9,11,13,15 */ + static const u8 wrrec_table[] = { + 1, 2, 3, 4, 5, 6, 7, 8, 10, 10, 12, 12, 14, 14, 0, 0 + }; + + refrec_ctrl = picos_to_mclk(c, common_dimm->trfc_ps) - 8; + wrrec_mclk = picos_to_mclk(c, common_dimm->twr_ps); + acttoact_mclk = picos_to_mclk(c, common_dimm->trrd_ps); + wrtord_mclk = picos_to_mclk(c, common_dimm->twtr_ps); + if ((wrrec_mclk < 1) || (wrrec_mclk > 16)) + printf("Error: WRREC doesn't support %d clocks\n", wrrec_mclk); + else + wrrec_mclk = wrrec_table[wrrec_mclk - 1]; + } + + if (popts->otf_burst_chop_en) + wrrec_mclk += 2; + + /* + * JEDEC has min requirement for tRRD + */ + if (is_ddr3(popts) && acttoact_mclk < 4) + acttoact_mclk = 4; + + /* + * JEDEC has some min requirements for tWTR + */ + if (is_ddr2(popts) && wrtord_mclk < 2) + wrtord_mclk = 2; + + if (is_ddr3(popts) && wrtord_mclk < 4) + wrtord_mclk = 4; + + if (popts->otf_burst_chop_en) + wrtord_mclk += 2; + + ddr->timing_cfg_1 = (0 + | ((pretoact_mclk & 0x0F) << 28) + | ((acttopre_mclk & 0x0F) << 24) + | ((acttorw_mclk & 0xF) << 20) + | ((caslat_ctrl & 0xF) << 16) + | ((refrec_ctrl & 0xF) << 12) + | ((wrrec_mclk & 0x0F) << 8) + | ((acttoact_mclk & 0x0F) << 4) + | ((wrtord_mclk & 0x0F) << 0) + ); + debug("FSLDDR: timing_cfg_1 = 0x%08x\n", ddr->timing_cfg_1); +} + +/* DDR SDRAM Timing Configuration 2 (TIMING_CFG_2) */ +static void set_timing_cfg_2(struct fsl_ddr_controller *c, + unsigned int cas_latency, + unsigned int additive_latency) +{ + fsl_ddr_cfg_regs_t *ddr = &c->fsl_ddr_config_reg; + const memctl_options_t *popts = &c->memctl_opts; + const struct common_timing_params *common_dimm = &c->common_timing_params; + /* Additive latency */ + unsigned char add_lat_mclk; + /* CAS-to-preamble override */ + unsigned short cpo; + /* Write latency */ + unsigned char wr_lat; + /* Read to precharge (tRTP) */ + unsigned char rd_to_pre; + /* Write command to write data strobe timing adjustment */ + unsigned char wr_data_delay; + /* Minimum CKE pulse width (tCKE) */ + unsigned char cke_pls; + /* Window for four activates (tFAW) */ + unsigned short four_act; + unsigned int mclk_ps; + + /* FIXME add check that this must be less than acttorw_mclk */ + add_lat_mclk = additive_latency; + cpo = popts->cpo_override; + + if (is_ddr1(popts)) { + /* + * This is a lie. It should really be 1, but if it is + * set to 1, bits overlap into the old controller's + * otherwise unused ACSM field. If we leave it 0, then + * the HW will magically treat it as 1 for DDR 1. Oh Yea. + */ + wr_lat = 0; + } else if (is_ddr2(popts)) { + wr_lat = cas_latency - 1; + } else if (is_ddr3(popts)) { + wr_lat = compute_cas_write_latency_ddr3(c); + } else { + wr_lat = compute_cas_write_latency_ddr4(c); + } + + if (is_ddr4(popts)) + rd_to_pre = picos_to_mclk(c, 7500); + else + rd_to_pre = picos_to_mclk(c, common_dimm->trtp_ps); + + /* + * JEDEC has some min requirements for tRTP + */ + if (is_ddr2(popts) && rd_to_pre < 2) + rd_to_pre = 2; + + if (is_ddr3_4(popts) && rd_to_pre < 4) + rd_to_pre = 4; + + if (popts->otf_burst_chop_en) + rd_to_pre += 2; /* according to UM */ + + wr_data_delay = popts->write_data_delay; + + if (is_ddr4(popts)) { + cpo = 0; + cke_pls = max(3U, picos_to_mclk(c, 5000)); + } else if (is_ddr3(popts)) { + mclk_ps = get_memory_clk_period_ps(c); + + /* + * cke pulse = max(3nCK, 7.5ns) for DDR3-800 + * max(3nCK, 5.625ns) for DDR3-1066, 1333 + * max(3nCK, 5ns) for DDR3-1600, 1866, 2133 + */ + cke_pls = max(3U, picos_to_mclk(c, mclk_ps > 1870 ? 7500 : + (mclk_ps > 1245 ? 5625 : 5000))); + } else if (is_ddr2(popts)) { + cke_pls = FSL_DDR_MIN_TCKE_PULSE_WIDTH_DDR2; + } else { + cke_pls = FSL_DDR_MIN_TCKE_PULSE_WIDTH_DDR1; + } + + four_act = picos_to_mclk(c, popts->tfaw_window_four_activates_ps); + + ddr->timing_cfg_2 = (0 + | ((add_lat_mclk & 0xf) << 28) + | ((cpo & 0x1f) << 23) + | ((wr_lat & 0xf) << 19) + | (((wr_lat & 0x10) >> 4) << 18) + | ((rd_to_pre & RD_TO_PRE_MASK) << RD_TO_PRE_SHIFT) + | ((wr_data_delay & WR_DATA_DELAY_MASK) << WR_DATA_DELAY_SHIFT) + | ((cke_pls & 0x7) << 6) + | ((four_act & 0x3f) << 0) + ); + debug("FSLDDR: timing_cfg_2 = 0x%08x\n", ddr->timing_cfg_2); +} + +/* DDR SDRAM Register Control Word */ +static void set_ddr_sdram_rcw(struct fsl_ddr_controller *c) +{ + fsl_ddr_cfg_regs_t *ddr = &c->fsl_ddr_config_reg; + const memctl_options_t *popts = &c->memctl_opts; + const struct common_timing_params *common_dimm = &c->common_timing_params; + unsigned int ddr_freq = c->ddr_freq / 1000000; + unsigned int rc0a, rc0f; + + if (common_dimm->all_dimms_registered && + !common_dimm->all_dimms_unbuffered) { + if (popts->rcw_override) { + ddr->ddr_sdram_rcw_1 = popts->rcw_1; + ddr->ddr_sdram_rcw_2 = popts->rcw_2; + ddr->ddr_sdram_rcw_3 = popts->rcw_3; + } else { + rc0a = ddr_freq > 3200 ? 0x7 : + (ddr_freq > 2933 ? 0x6 : + (ddr_freq > 2666 ? 0x5 : + (ddr_freq > 2400 ? 0x4 : + (ddr_freq > 2133 ? 0x3 : + (ddr_freq > 1866 ? 0x2 : + (ddr_freq > 1600 ? 1 : 0)))))); + rc0f = ddr_freq > 3200 ? 0x3 : + (ddr_freq > 2400 ? 0x2 : + (ddr_freq > 2133 ? 0x1 : 0)); + ddr->ddr_sdram_rcw_1 = + common_dimm->rcw[0] << 28 | \ + common_dimm->rcw[1] << 24 | \ + common_dimm->rcw[2] << 20 | \ + common_dimm->rcw[3] << 16 | \ + common_dimm->rcw[4] << 12 | \ + common_dimm->rcw[5] << 8 | \ + common_dimm->rcw[6] << 4 | \ + common_dimm->rcw[7]; + ddr->ddr_sdram_rcw_2 = + common_dimm->rcw[8] << 28 | \ + common_dimm->rcw[9] << 24 | \ + rc0a << 20 | \ + common_dimm->rcw[11] << 16 | \ + common_dimm->rcw[12] << 12 | \ + common_dimm->rcw[13] << 8 | \ + common_dimm->rcw[14] << 4 | \ + rc0f; + ddr->ddr_sdram_rcw_3 = + ((ddr_freq - 1260 + 19) / 20) << 8; + } + debug("FSLDDR: ddr_sdram_rcw_1 = 0x%08x\n", + ddr->ddr_sdram_rcw_1); + debug("FSLDDR: ddr_sdram_rcw_2 = 0x%08x\n", + ddr->ddr_sdram_rcw_2); + debug("FSLDDR: ddr_sdram_rcw_3 = 0x%08x\n", + ddr->ddr_sdram_rcw_3); + } +} + +/* DDR SDRAM control configuration (DDR_SDRAM_CFG) */ +static void set_ddr_sdram_cfg(struct fsl_ddr_controller *c) +{ + fsl_ddr_cfg_regs_t *ddr = &c->fsl_ddr_config_reg; + const memctl_options_t *popts = &c->memctl_opts; + const struct common_timing_params *common_dimm = &c->common_timing_params; + unsigned int mem_en; /* DDR SDRAM interface logic enable */ + unsigned int sren; /* Self refresh enable (during sleep) */ + unsigned int ecc_en = 0; /* ECC enable. */ + unsigned int rd_en; /* Registered DIMM enable */ + unsigned int sdram_type; /* Type of SDRAM */ + unsigned int dyn_pwr; /* Dynamic power management mode */ + unsigned int dbw; /* DRAM dta bus width */ + unsigned int eight_be = 0; /* 8-beat burst enable, DDR2 is zero */ + unsigned int ncap = 0; /* Non-concurrent auto-precharge */ + unsigned int threet_en; /* Enable 3T timing */ + unsigned int twot_en; /* Enable 2T timing */ + unsigned int ba_intlv_ctl; /* Bank (CS) interleaving control */ + unsigned int x32_en = 0; /* x32 enable */ + unsigned int pchb8 = 0; /* precharge bit 8 enable */ + unsigned int hse; /* Global half strength override */ + unsigned int acc_ecc_en = 0; /* Accumulated ECC enable */ + unsigned int mem_halt = 0; /* memory controller halt */ + unsigned int bi = 0; /* Bypass initialization */ + + mem_en = 1; + sren = popts->self_refresh_in_sleep; + if (common_dimm->all_dimms_ecc_capable) + ecc_en = 1; + + if (common_dimm->all_dimms_registered && + !common_dimm->all_dimms_unbuffered) { + rd_en = 1; + twot_en = 0; + } else { + rd_en = 0; + twot_en = popts->twot_en; + } + + sdram_type = popts->ddrtype; + + dyn_pwr = popts->dynamic_power; + dbw = popts->data_bus_width; + /* 8-beat burst enable DDR-III case + * we must clear it when use the on-the-fly mode, + * must set it when use the 32-bits bus mode. + */ + if (is_ddr3_4(popts)) { + if (popts->burst_length == DDR_BL8) + eight_be = 1; + if (popts->burst_length == DDR_OTF) + eight_be = 0; + if (dbw == 0x1) + eight_be = 1; + } + + threet_en = popts->threet_en; + ba_intlv_ctl = popts->ba_intlv_ctl; + hse = popts->half_strength_driver_enable; + + /* set when ddr bus width < 64 */ + acc_ecc_en = (dbw != 0 && ecc_en == 1) ? 1 : 0; + + ddr->ddr_sdram_cfg = (0 + | ((mem_en & 0x1) << 31) + | ((sren & 0x1) << 30) + | ((ecc_en & 0x1) << 29) + | ((rd_en & 0x1) << 28) + | ((sdram_type & 0x7) << 24) + | ((dyn_pwr & 0x1) << 21) + | ((dbw & 0x3) << 19) + | ((eight_be & 0x1) << 18) + | ((ncap & 0x1) << 17) + | ((threet_en & 0x1) << 16) + | ((twot_en & 0x1) << 15) + | ((ba_intlv_ctl & 0x7F) << 8) + | ((x32_en & 0x1) << 5) + | ((pchb8 & 0x1) << 4) + | ((hse & 0x1) << 3) + | ((acc_ecc_en & 0x1) << 2) + | ((mem_halt & 0x1) << 1) + | ((bi & 0x1) << 0) + ); + debug("FSLDDR: ddr_sdram_cfg = 0x%08x\n", ddr->ddr_sdram_cfg); +} + +/* DDR SDRAM control configuration 2 (DDR_SDRAM_CFG_2) */ +static void set_ddr_sdram_cfg_2(struct fsl_ddr_controller *c, + const unsigned int unq_mrs_en) +{ + fsl_ddr_cfg_regs_t *ddr = &c->fsl_ddr_config_reg; + const memctl_options_t *popts = &c->memctl_opts; + const struct common_timing_params *common_dimm = &c->common_timing_params; + unsigned int frc_sr = 0; /* Force self refresh */ + unsigned int sr_ie = 0; /* Self-refresh interrupt enable */ + unsigned int odt_cfg = 0; /* ODT configuration */ + unsigned int num_pr; /* Number of posted refreshes */ + unsigned int slow = 0; /* DDR will be run less than 1250 */ + unsigned int x4_en = 0; /* x4 DRAM enable */ + unsigned int obc_cfg; /* On-The-Fly Burst Chop Cfg */ + unsigned int ap_en; /* Address Parity Enable */ + unsigned int d_init; /* DRAM data initialization */ + unsigned int rcw_en = 0; /* Register Control Word Enable */ + unsigned int md_en = 0; /* Mirrored DIMM Enable */ + unsigned int qd_en = 0; /* quad-rank DIMM Enable */ + int i; + unsigned int dll_rst_dis; /* DLL reset disable */ + unsigned int dqs_cfg; /* DQS configuration */ + + if (is_ddr4(popts)) { + dll_rst_dis = 0; + dqs_cfg = 0; + } else { + dqs_cfg = popts->dqs_config; + dll_rst_dis = 1; + } + + for (i = 0; i < c->chip_selects_per_ctrl; i++) { + if (popts->cs_local_opts[i].odt_rd_cfg + || popts->cs_local_opts[i].odt_wr_cfg) { + odt_cfg = SDRAM_CFG2_ODT_ONLY_READ; + break; + } + } + sr_ie = popts->self_refresh_interrupt_en; + num_pr = popts->package_3ds + 1; + + /* + * 8572 manual says + * {TIMING_CFG_1[PRETOACT] + * + [DDR_SDRAM_CFG_2[NUM_PR] + * * ({EXT_REFREC || REFREC} + 8 + 2)]} + * << DDR_SDRAM_INTERVAL[REFINT] + */ + if (is_ddr3_4(popts)) + obc_cfg = popts->otf_burst_chop_en; + else + obc_cfg = 0; + + slow = c->ddr_freq < 1249000000; + + if (popts->registered_dimm_en) + rcw_en = 1; + + /* DDR4 can have address parity for UDIMM and discrete */ + if (!is_ddr4(popts) && !popts->registered_dimm_en) { + ap_en = 0; + } else { + ap_en = popts->ap_en; + } + + x4_en = popts->x4_en ? 1 : 0; + + /* Use the DDR controller to auto initialize memory. */ + d_init = common_dimm->all_dimms_ecc_capable ? 1 : 0;; + ddr->ddr_data_init = 0xdeadbeef; + + if (is_ddr3_4(popts)) + md_en = popts->mirrored_dimm; + + qd_en = popts->quad_rank_present ? 1 : 0; + ddr->ddr_sdram_cfg_2 = (0 + | ((frc_sr & 0x1) << 31) + | ((sr_ie & 0x1) << 30) + | ((dll_rst_dis & 0x1) << 29) + | ((dqs_cfg & 0x3) << 26) + | ((odt_cfg & 0x3) << 21) + | ((num_pr & 0xf) << 12) + | ((slow & 1) << 11) + | (x4_en << 10) + | (qd_en << 9) + | (unq_mrs_en << 8) + | ((obc_cfg & 0x1) << 6) + | ((ap_en & 0x1) << 5) + | ((d_init & 0x1) << 4) + | ((rcw_en & 0x1) << 2) + | ((md_en & 0x1) << 0) + ); + debug("FSLDDR: ddr_sdram_cfg_2 = 0x%08x\n", ddr->ddr_sdram_cfg_2); +} + +/* DDR SDRAM Mode configuration 2 (DDR_SDRAM_MODE_2) */ +static void set_ddr4_sdram_mode_2(struct fsl_ddr_controller *c, + const unsigned int unq_mrs_en) +{ + fsl_ddr_cfg_regs_t *ddr = &c->fsl_ddr_config_reg; + const memctl_options_t *popts = &c->memctl_opts; + const struct common_timing_params *common_dimm = &c->common_timing_params; + unsigned short esdmode2 = 0; /* Extended SDRAM mode 2 */ + unsigned short esdmode3 = 0; /* Extended SDRAM mode 3 */ + int i; + unsigned int wr_crc = 0; /* Disable */ + unsigned int rtt_wr = 0; /* Rtt_WR - dynamic ODT off */ + unsigned int srt = 0; /* self-refresh temerature, normal range */ + unsigned int cwl = compute_cas_write_latency_ddr4(c) - 9; + unsigned int mpr = 0; /* serial */ + unsigned int wc_lat; + const unsigned int mclk_ps = get_memory_clk_period_ps(c); + + if (popts->rtt_override) + rtt_wr = popts->rtt_wr_override_value; + else + rtt_wr = popts->cs_local_opts[0].odt_rtt_wr; + + if (common_dimm->extended_op_srt) + srt = common_dimm->extended_op_srt; + + esdmode2 = (0 + | ((wr_crc & 0x1) << 12) + | ((rtt_wr & 0x3) << 9) + | ((srt & 0x3) << 6) + | ((cwl & 0x7) << 3)); + + if (mclk_ps >= 1250) + wc_lat = 0; + else if (mclk_ps >= 833) + wc_lat = 1; + else + wc_lat = 2; + + esdmode3 = (0 + | ((mpr & 0x3) << 11) + | ((wc_lat & 0x3) << 9)); + + ddr->ddr_sdram_mode_2 = (0 + | ((esdmode2 & 0xFFFF) << 16) + | ((esdmode3 & 0xFFFF) << 0) + ); + debug("FSLDDR: ddr_sdram_mode_2 = 0x%08x\n", ddr->ddr_sdram_mode_2); + + if (unq_mrs_en) { /* unique mode registers are supported */ + for (i = 1; i < c->chip_selects_per_ctrl; i++) { + if (popts->rtt_override) + rtt_wr = popts->rtt_wr_override_value; + else + rtt_wr = popts->cs_local_opts[i].odt_rtt_wr; + + esdmode2 &= 0xF9FF; /* clear bit 10, 9 */ + esdmode2 |= (rtt_wr & 0x3) << 9; + switch (i) { + case 1: + ddr->ddr_sdram_mode_4 = (0 + | ((esdmode2 & 0xFFFF) << 16) + | ((esdmode3 & 0xFFFF) << 0) + ); + break; + case 2: + ddr->ddr_sdram_mode_6 = (0 + | ((esdmode2 & 0xFFFF) << 16) + | ((esdmode3 & 0xFFFF) << 0) + ); + break; + case 3: + ddr->ddr_sdram_mode_8 = (0 + | ((esdmode2 & 0xFFFF) << 16) + | ((esdmode3 & 0xFFFF) << 0) + ); + break; + } + } + debug("FSLDDR: ddr_sdram_mode_4 = 0x%08x\n", + ddr->ddr_sdram_mode_4); + debug("FSLDDR: ddr_sdram_mode_6 = 0x%08x\n", + ddr->ddr_sdram_mode_6); + debug("FSLDDR: ddr_sdram_mode_8 = 0x%08x\n", + ddr->ddr_sdram_mode_8); + } +} + +/* DDR SDRAM Mode configuration 2 (DDR_SDRAM_MODE_2) */ +static void set_ddr3_sdram_mode_2(struct fsl_ddr_controller *c, + const unsigned int unq_mrs_en) +{ + fsl_ddr_cfg_regs_t *ddr = &c->fsl_ddr_config_reg; + const memctl_options_t *popts = &c->memctl_opts; + const struct common_timing_params *common_dimm = &c->common_timing_params; + unsigned short esdmode2 = 0; /* Extended SDRAM mode 2 */ + unsigned short esdmode3 = 0; /* Extended SDRAM mode 3 */ + int i; + unsigned int rtt_wr = 0; /* Rtt_WR - dynamic ODT off */ + unsigned int srt = 0; /* self-refresh temerature, normal range */ + unsigned int asr = 0; /* auto self-refresh disable */ + unsigned int cwl = compute_cas_write_latency_ddr3(c) - 5; + unsigned int pasr = 0; /* partial array self refresh disable */ + + if (popts->rtt_override) + rtt_wr = popts->rtt_wr_override_value; + else + rtt_wr = popts->cs_local_opts[0].odt_rtt_wr; + + if (common_dimm->extended_op_srt) + srt = common_dimm->extended_op_srt; + + esdmode2 = (0 + | ((rtt_wr & 0x3) << 9) + | ((srt & 0x1) << 7) + | ((asr & 0x1) << 6) + | ((cwl & 0x7) << 3) + | ((pasr & 0x7) << 0)); + ddr->ddr_sdram_mode_2 = (0 + | ((esdmode2 & 0xFFFF) << 16) + | ((esdmode3 & 0xFFFF) << 0) + ); + debug("FSLDDR: ddr_sdram_mode_2 = 0x%08x\n", ddr->ddr_sdram_mode_2); + + if (unq_mrs_en) { /* unique mode registers are supported */ + for (i = 1; i < c->chip_selects_per_ctrl; i++) { + if (popts->rtt_override) + rtt_wr = popts->rtt_wr_override_value; + else + rtt_wr = popts->cs_local_opts[i].odt_rtt_wr; + + esdmode2 &= 0xF9FF; /* clear bit 10, 9 */ + esdmode2 |= (rtt_wr & 0x3) << 9; + switch (i) { + case 1: + ddr->ddr_sdram_mode_4 = (0 + | ((esdmode2 & 0xFFFF) << 16) + | ((esdmode3 & 0xFFFF) << 0) + ); + break; + case 2: + ddr->ddr_sdram_mode_6 = (0 + | ((esdmode2 & 0xFFFF) << 16) + | ((esdmode3 & 0xFFFF) << 0) + ); + break; + case 3: + ddr->ddr_sdram_mode_8 = (0 + | ((esdmode2 & 0xFFFF) << 16) + | ((esdmode3 & 0xFFFF) << 0) + ); + break; + } + } + debug("FSLDDR: ddr_sdram_mode_4 = 0x%08x\n", + ddr->ddr_sdram_mode_4); + debug("FSLDDR: ddr_sdram_mode_6 = 0x%08x\n", + ddr->ddr_sdram_mode_6); + debug("FSLDDR: ddr_sdram_mode_8 = 0x%08x\n", + ddr->ddr_sdram_mode_8); + } +} + +/* DDR SDRAM Mode configuration 2 (DDR_SDRAM_MODE_2) */ +static void set_ddr1_2_sdram_mode_2(struct fsl_ddr_controller *c, + const unsigned int unq_mrs_en) +{ + fsl_ddr_cfg_regs_t *ddr = &c->fsl_ddr_config_reg; + unsigned short esdmode2 = 0; /* Extended SDRAM mode 2 */ + unsigned short esdmode3 = 0; /* Extended SDRAM mode 3 */ + + ddr->ddr_sdram_mode_2 = (0 + | ((esdmode2 & 0xFFFF) << 16) + | ((esdmode3 & 0xFFFF) << 0) + ); + debug("FSLDDR: ddr_sdram_mode_2 = 0x%08x\n", ddr->ddr_sdram_mode_2); +} + +/* DDR SDRAM Mode configuration 9 (DDR_SDRAM_MODE_9) */ +static void set_ddr_sdram_mode_9(struct fsl_ddr_controller *c, + const unsigned int unq_mrs_en) +{ + fsl_ddr_cfg_regs_t *ddr = &c->fsl_ddr_config_reg; + const memctl_options_t *popts = &c->memctl_opts; + int i; + unsigned short esdmode4 = 0; /* Extended SDRAM mode 4 */ + unsigned short esdmode5; /* Extended SDRAM mode 5 */ + int rtt_park = 0; + bool four_cs = false; + const unsigned int mclk_ps = get_memory_clk_period_ps(0); + + if ((ddr->cs[0].config & SDRAM_CS_CONFIG_EN) && + (ddr->cs[1].config & SDRAM_CS_CONFIG_EN) && + (ddr->cs[2].config & SDRAM_CS_CONFIG_EN) && + (ddr->cs[3].config & SDRAM_CS_CONFIG_EN)) + four_cs = true; + + if (ddr->cs[0].config & SDRAM_CS_CONFIG_EN) { + esdmode5 = 0x00000500; /* Data mask enable, RTT_PARK CS0 */ + rtt_park = four_cs ? 0 : 1; + } else { + esdmode5 = 0x00000400; /* Data mask enabled */ + } + + /* + * For DDR3, set C/A latency if address parity is enabled. + * For DDR4, set C/A latency for UDIMM only. For RDIMM the delay is + * handled by register chip and RCW settings. + */ + if ((ddr->ddr_sdram_cfg_2 & SDRAM_CFG2_AP_EN) && + (!is_ddr4(popts) || !popts->registered_dimm_en)) { + if (mclk_ps >= 935) { + /* for DDR4-1600/1866/2133 */ + esdmode5 |= DDR_MR5_CA_PARITY_LAT_4_CLK; + } else if (mclk_ps >= 833) { + /* for DDR4-2400 */ + esdmode5 |= DDR_MR5_CA_PARITY_LAT_5_CLK; + } else { + printf("parity: mclk_ps = %d not supported\n", mclk_ps); + } + } + + ddr->ddr_sdram_mode_9 = (0 + | ((esdmode4 & 0xffff) << 16) + | ((esdmode5 & 0xffff) << 0) + ); + + /* Normally only the first enabled CS use 0x500, others use 0x400 + * But when four chip-selects are all enabled, all mode registers + * need 0x500 to park. + */ + + debug("FSLDDR: ddr_sdram_mode_9 = 0x%08x\n", ddr->ddr_sdram_mode_9); + if (unq_mrs_en) { /* unique mode registers are supported */ + for (i = 1; i < c->chip_selects_per_ctrl; i++) { + if (!rtt_park && + (ddr->cs[i].config & SDRAM_CS_CONFIG_EN)) { + esdmode5 |= 0x00000500; /* RTT_PARK */ + rtt_park = four_cs ? 0 : 1; + } else { + esdmode5 = 0x00000400; + } + + if ((ddr->ddr_sdram_cfg_2 & SDRAM_CFG2_AP_EN) && + (!is_ddr4(popts) || !popts->registered_dimm_en)) { + if (mclk_ps >= 935) { + /* for DDR4-1600/1866/2133 */ + esdmode5 |= DDR_MR5_CA_PARITY_LAT_4_CLK; + } else if (mclk_ps >= 833) { + /* for DDR4-2400 */ + esdmode5 |= DDR_MR5_CA_PARITY_LAT_5_CLK; + } else { + printf("parity: mclk_ps = %d not supported\n", + mclk_ps); + } + } + + switch (i) { + case 1: + ddr->ddr_sdram_mode_11 = (0 + | ((esdmode4 & 0xFFFF) << 16) + | ((esdmode5 & 0xFFFF) << 0) + ); + break; + case 2: + ddr->ddr_sdram_mode_13 = (0 + | ((esdmode4 & 0xFFFF) << 16) + | ((esdmode5 & 0xFFFF) << 0) + ); + break; + case 3: + ddr->ddr_sdram_mode_15 = (0 + | ((esdmode4 & 0xFFFF) << 16) + | ((esdmode5 & 0xFFFF) << 0) + ); + break; + } + } + debug("FSLDDR: ddr_sdram_mode_11 = 0x%08x\n", + ddr->ddr_sdram_mode_11); + debug("FSLDDR: ddr_sdram_mode_13 = 0x%08x\n", + ddr->ddr_sdram_mode_13); + debug("FSLDDR: ddr_sdram_mode_15 = 0x%08x\n", + ddr->ddr_sdram_mode_15); + } +} + +/* DDR SDRAM Mode configuration 10 (DDR_SDRAM_MODE_10) */ +static void set_ddr_sdram_mode_10(struct fsl_ddr_controller *c, + const unsigned int unq_mrs_en) +{ + fsl_ddr_cfg_regs_t *ddr = &c->fsl_ddr_config_reg; + const memctl_options_t *popts = &c->memctl_opts; + const struct common_timing_params *common_dimm = &c->common_timing_params; + int i; + unsigned short esdmode6 = 0; /* Extended SDRAM mode 6 */ + unsigned short esdmode7 = 0; /* Extended SDRAM mode 7 */ + unsigned int tccdl_min = picos_to_mclk(c, common_dimm->tccdl_ps); + + esdmode6 = ((tccdl_min - 4) & 0x7) << 10; + + if (popts->ddr_cdr2 & DDR_CDR2_VREF_RANGE_2) + esdmode6 |= 1 << 6; /* Range 2 */ + + ddr->ddr_sdram_mode_10 = (0 + | ((esdmode6 & 0xffff) << 16) + | ((esdmode7 & 0xffff) << 0) + ); + debug("FSLDDR: ddr_sdram_mode_10 = 0x%08x\n", ddr->ddr_sdram_mode_10); + if (unq_mrs_en) { /* unique mode registers are supported */ + for (i = 1; i < c->chip_selects_per_ctrl; i++) { + switch (i) { + case 1: + ddr->ddr_sdram_mode_12 = (0 + | ((esdmode6 & 0xFFFF) << 16) + | ((esdmode7 & 0xFFFF) << 0) + ); + break; + case 2: + ddr->ddr_sdram_mode_14 = (0 + | ((esdmode6 & 0xFFFF) << 16) + | ((esdmode7 & 0xFFFF) << 0) + ); + break; + case 3: + ddr->ddr_sdram_mode_16 = (0 + | ((esdmode6 & 0xFFFF) << 16) + | ((esdmode7 & 0xFFFF) << 0) + ); + break; + } + } + debug("FSLDDR: ddr_sdram_mode_12 = 0x%08x\n", + ddr->ddr_sdram_mode_12); + debug("FSLDDR: ddr_sdram_mode_14 = 0x%08x\n", + ddr->ddr_sdram_mode_14); + debug("FSLDDR: ddr_sdram_mode_16 = 0x%08x\n", + ddr->ddr_sdram_mode_16); + } +} + +/* DDR SDRAM Interval Configuration (DDR_SDRAM_INTERVAL) */ +static void set_ddr_sdram_interval(struct fsl_ddr_controller *c) +{ + fsl_ddr_cfg_regs_t *ddr = &c->fsl_ddr_config_reg; + const memctl_options_t *popts = &c->memctl_opts; + const struct common_timing_params *common_dimm = &c->common_timing_params; + unsigned int refint; /* Refresh interval */ + unsigned int bstopre; /* Precharge interval */ + + refint = picos_to_mclk(c, common_dimm->refresh_rate_ps); + + bstopre = popts->bstopre; + + /* refint field used 0x3FFF in earlier controllers */ + ddr->ddr_sdram_interval = (0 + | ((refint & 0xFFFF) << 16) + | ((bstopre & 0x3FFF) << 0) + ); + debug("FSLDDR: ddr_sdram_interval = 0x%08x\n", ddr->ddr_sdram_interval); +} + +/* DDR SDRAM Mode configuration set (DDR_SDRAM_MODE) */ +static void set_ddr_sdram_mode_ddr4(struct fsl_ddr_controller *c, + unsigned int cas_latency, + unsigned int additive_latency, + const unsigned int unq_mrs_en) +{ + fsl_ddr_cfg_regs_t *ddr = &c->fsl_ddr_config_reg; + const memctl_options_t *popts = &c->memctl_opts; + const struct common_timing_params *common_dimm = &c->common_timing_params; + int i; + unsigned short esdmode; /* Extended SDRAM mode */ + unsigned short sdmode; /* SDRAM mode */ + + /* Mode Register - MR1 */ + unsigned int qoff = 0; /* Output buffer enable 0=yes, 1=no */ + unsigned int tdqs_en = 0; /* TDQS Enable: 0=no, 1=yes */ + unsigned int rtt; + unsigned int wrlvl_en = 0; /* Write level enable: 0=no, 1=yes */ + unsigned int al = 0; /* Posted CAS# additive latency (AL) */ + unsigned int dic = 0; /* Output driver impedance, 40ohm */ + unsigned int dll_en = 1; /* DLL Enable 1=Enable (Normal), + 0=Disable (Test/Debug) */ + + /* Mode Register - MR0 */ + unsigned int wr = 0; /* Write Recovery */ + unsigned int dll_rst; /* DLL Reset */ + unsigned int mode; /* Normal=0 or Test=1 */ + unsigned int caslat = 4;/* CAS# latency, default set as 6 cycles */ + /* BT: Burst Type (0=Nibble Sequential, 1=Interleaved) */ + unsigned int bt; + unsigned int bl; /* BL: Burst Length */ + + unsigned int wr_mclk; + /* DDR4 support WR 10, 12, 14, 16, 18, 20, 24 */ + static const u8 wr_table[] = { + 0, 1, 1, 2, 2, 3, 3, 4, 4, 5, 5, 6, 6, 6, 6}; + /* DDR4 support CAS 9, 10, 11, 12, 13, 14, 15, 16, 18, 20, 22, 24 */ + static const u8 cas_latency_table[] = { + 0, 1, 2, 3, 4, 5, 6, 7, 8, 8, + 9, 9, 10, 10, 11, 11}; + + if (popts->rtt_override) + rtt = popts->rtt_override_value; + else + rtt = popts->cs_local_opts[0].odt_rtt_norm; + + if (additive_latency == (cas_latency - 1)) + al = 1; + if (additive_latency == (cas_latency - 2)) + al = 2; + + if (popts->quad_rank_present) + dic = 1; /* output driver impedance 240/7 ohm */ + + /* + * The esdmode value will also be used for writing + * MR1 during write leveling for DDR3, although the + * bits specifically related to the write leveling + * scheme will be handled automatically by the DDR + * controller. so we set the wrlvl_en = 0 here. + */ + esdmode = (0 + | ((qoff & 0x1) << 12) + | ((tdqs_en & 0x1) << 11) + | ((rtt & 0x7) << 8) + | ((wrlvl_en & 0x1) << 7) + | ((al & 0x3) << 3) + | ((dic & 0x3) << 1) /* DIC field is split */ + | ((dll_en & 0x1) << 0) + ); + + /* + * DLL control for precharge PD + * 0=slow exit DLL off (tXPDLL) + * 1=fast exit DLL on (tXP) + */ + + wr_mclk = picos_to_mclk(c, common_dimm->twr_ps); + if (wr_mclk <= 24) { + wr = wr_table[wr_mclk - 10]; + } else { + printf("Error: unsupported write recovery for mode register wr_mclk = %d\n", + wr_mclk); + } + + dll_rst = 0; /* dll no reset */ + mode = 0; /* normal mode */ + + /* look up table to get the cas latency bits */ + if (cas_latency >= 9 && cas_latency <= 24) + caslat = cas_latency_table[cas_latency - 9]; + else + printf("Error: unsupported cas latency for mode register\n"); + + bt = 0; /* Nibble sequential */ + + switch (popts->burst_length) { + case DDR_BL8: + bl = 0; + break; + case DDR_OTF: + bl = 1; + break; + case DDR_BC4: + bl = 2; + break; + default: + printf("Error: invalid burst length of %u specified. ", + popts->burst_length); + printf("Defaulting to on-the-fly BC4 or BL8 beats.\n"); + bl = 1; + break; + } + + sdmode = (0 + | ((wr & 0x7) << 9) + | ((dll_rst & 0x1) << 8) + | ((mode & 0x1) << 7) + | (((caslat >> 1) & 0x7) << 4) + | ((bt & 0x1) << 3) + | ((caslat & 1) << 2) + | ((bl & 0x3) << 0) + ); + + ddr->ddr_sdram_mode = (0 + | ((esdmode & 0xFFFF) << 16) + | ((sdmode & 0xFFFF) << 0) + ); + + debug("FSLDDR: ddr_sdram_mode = 0x%08x\n", ddr->ddr_sdram_mode); + + if (unq_mrs_en) { /* unique mode registers are supported */ + for (i = 1; i < c->chip_selects_per_ctrl; i++) { + if (popts->rtt_override) + rtt = popts->rtt_override_value; + else + rtt = popts->cs_local_opts[i].odt_rtt_norm; + + esdmode &= 0xF8FF; /* clear bit 10,9,8 for rtt */ + esdmode |= (rtt & 0x7) << 8; + switch (i) { + case 1: + ddr->ddr_sdram_mode_3 = (0 + | ((esdmode & 0xFFFF) << 16) + | ((sdmode & 0xFFFF) << 0) + ); + break; + case 2: + ddr->ddr_sdram_mode_5 = (0 + | ((esdmode & 0xFFFF) << 16) + | ((sdmode & 0xFFFF) << 0) + ); + break; + case 3: + ddr->ddr_sdram_mode_7 = (0 + | ((esdmode & 0xFFFF) << 16) + | ((sdmode & 0xFFFF) << 0) + ); + break; + } + } + debug("FSLDDR: ddr_sdram_mode_3 = 0x%08x\n", + ddr->ddr_sdram_mode_3); + debug("FSLDDR: ddr_sdram_mode_5 = 0x%08x\n", + ddr->ddr_sdram_mode_5); + debug("FSLDDR: ddr_sdram_mode_5 = 0x%08x\n", + ddr->ddr_sdram_mode_5); + } +} + +/* DDR SDRAM Mode configuration set (DDR_SDRAM_MODE) */ +static void set_ddr_sdram_mode_ddr3(struct fsl_ddr_controller *c, + unsigned int cas_latency, + unsigned int additive_latency, + const unsigned int unq_mrs_en) +{ + fsl_ddr_cfg_regs_t *ddr = &c->fsl_ddr_config_reg; + const memctl_options_t *popts = &c->memctl_opts; + const struct common_timing_params *common_dimm = &c->common_timing_params; + int i; + unsigned short esdmode; /* Extended SDRAM mode */ + unsigned short sdmode; /* SDRAM mode */ + + /* Mode Register - MR1 */ + unsigned int qoff = 0; /* Output buffer enable 0=yes, 1=no */ + unsigned int tdqs_en = 0; /* TDQS Enable: 0=no, 1=yes */ + unsigned int rtt; + unsigned int wrlvl_en = 0; /* Write level enable: 0=no, 1=yes */ + unsigned int al = 0; /* Posted CAS# additive latency (AL) */ + unsigned int dic = 0; /* Output driver impedance, 40ohm */ + unsigned int dll_en = 0; /* DLL Enable 0=Enable (Normal), + 1=Disable (Test/Debug) */ + + /* Mode Register - MR0 */ + unsigned int dll_on; /* DLL control for precharge PD, 0=off, 1=on */ + unsigned int wr = 0; /* Write Recovery */ + unsigned int dll_rst; /* DLL Reset */ + unsigned int mode; /* Normal=0 or Test=1 */ + unsigned int caslat = 4;/* CAS# latency, default set as 6 cycles */ + /* BT: Burst Type (0=Nibble Sequential, 1=Interleaved) */ + unsigned int bt; + unsigned int bl; /* BL: Burst Length */ + + unsigned int wr_mclk; + /* + * DDR_SDRAM_MODE doesn't support 9,11,13,15 + * Please refer JEDEC Standard No. 79-3E for Mode Register MR0 + * for this table + */ + static const u8 wr_table[] = {1, 2, 3, 4, 5, 5, 6, 6, 7, 7, 0, 0}; + + if (popts->rtt_override) + rtt = popts->rtt_override_value; + else + rtt = popts->cs_local_opts[0].odt_rtt_norm; + + if (additive_latency == (cas_latency - 1)) + al = 1; + if (additive_latency == (cas_latency - 2)) + al = 2; + + if (popts->quad_rank_present) + dic = 1; /* output driver impedance 240/7 ohm */ + + /* + * The esdmode value will also be used for writing + * MR1 during write leveling for DDR3, although the + * bits specifically related to the write leveling + * scheme will be handled automatically by the DDR + * controller. so we set the wrlvl_en = 0 here. + */ + esdmode = (0 + | ((qoff & 0x1) << 12) + | ((tdqs_en & 0x1) << 11) + | ((rtt & 0x4) << 7) /* rtt field is split */ + | ((wrlvl_en & 0x1) << 7) + | ((rtt & 0x2) << 5) /* rtt field is split */ + | ((dic & 0x2) << 4) /* DIC field is split */ + | ((al & 0x3) << 3) + | ((rtt & 0x1) << 2) /* rtt field is split */ + | ((dic & 0x1) << 1) /* DIC field is split */ + | ((dll_en & 0x1) << 0) + ); + + /* + * DLL control for precharge PD + * 0=slow exit DLL off (tXPDLL) + * 1=fast exit DLL on (tXP) + */ + dll_on = 1; + + wr_mclk = picos_to_mclk(c, common_dimm->twr_ps); + if (wr_mclk <= 16) { + wr = wr_table[wr_mclk - 5]; + } else { + printf("Error: unsupported write recovery for mode register " + "wr_mclk = %d\n", wr_mclk); + } + + dll_rst = 0; /* dll no reset */ + mode = 0; /* normal mode */ + + /* look up table to get the cas latency bits */ + if (cas_latency >= 5 && cas_latency <= 16) { + unsigned char cas_latency_table[] = { + 0x2, /* 5 clocks */ + 0x4, /* 6 clocks */ + 0x6, /* 7 clocks */ + 0x8, /* 8 clocks */ + 0xa, /* 9 clocks */ + 0xc, /* 10 clocks */ + 0xe, /* 11 clocks */ + 0x1, /* 12 clocks */ + 0x3, /* 13 clocks */ + 0x5, /* 14 clocks */ + 0x7, /* 15 clocks */ + 0x9, /* 16 clocks */ + }; + caslat = cas_latency_table[cas_latency - 5]; + } else { + printf("Error: unsupported cas latency for mode register\n"); + } + + bt = 0; /* Nibble sequential */ + + switch (popts->burst_length) { + case DDR_BL8: + bl = 0; + break; + case DDR_OTF: + bl = 1; + break; + case DDR_BC4: + bl = 2; + break; + default: + printf("Error: invalid burst length of %u specified. " + " Defaulting to on-the-fly BC4 or BL8 beats.\n", + popts->burst_length); + bl = 1; + break; + } + + sdmode = (0 + | ((dll_on & 0x1) << 12) + | ((wr & 0x7) << 9) + | ((dll_rst & 0x1) << 8) + | ((mode & 0x1) << 7) + | (((caslat >> 1) & 0x7) << 4) + | ((bt & 0x1) << 3) + | ((caslat & 1) << 2) + | ((bl & 0x3) << 0) + ); + + ddr->ddr_sdram_mode = (0 + | ((esdmode & 0xFFFF) << 16) + | ((sdmode & 0xFFFF) << 0) + ); + + debug("FSLDDR: ddr_sdram_mode = 0x%08x\n", ddr->ddr_sdram_mode); + + if (unq_mrs_en) { /* unique mode registers are supported */ + for (i = 1; i < c->chip_selects_per_ctrl; i++) { + if (popts->rtt_override) + rtt = popts->rtt_override_value; + else + rtt = popts->cs_local_opts[i].odt_rtt_norm; + + esdmode &= 0xFDBB; /* clear bit 9,6,2 */ + esdmode |= (0 + | ((rtt & 0x4) << 7) /* rtt field is split */ + | ((rtt & 0x2) << 5) /* rtt field is split */ + | ((rtt & 0x1) << 2) /* rtt field is split */ + ); + switch (i) { + case 1: + ddr->ddr_sdram_mode_3 = (0 + | ((esdmode & 0xFFFF) << 16) + | ((sdmode & 0xFFFF) << 0) + ); + break; + case 2: + ddr->ddr_sdram_mode_5 = (0 + | ((esdmode & 0xFFFF) << 16) + | ((sdmode & 0xFFFF) << 0) + ); + break; + case 3: + ddr->ddr_sdram_mode_7 = (0 + | ((esdmode & 0xFFFF) << 16) + | ((sdmode & 0xFFFF) << 0) + ); + break; + } + } + debug("FSLDDR: ddr_sdram_mode_3 = 0x%08x\n", + ddr->ddr_sdram_mode_3); + debug("FSLDDR: ddr_sdram_mode_5 = 0x%08x\n", + ddr->ddr_sdram_mode_5); + debug("FSLDDR: ddr_sdram_mode_5 = 0x%08x\n", + ddr->ddr_sdram_mode_5); + } +} + +static void set_ddr_sdram_mode_ddr12(struct fsl_ddr_controller *c, + unsigned int cas_latency, + unsigned int additive_latency, + const unsigned int unq_mrs_en) +{ + fsl_ddr_cfg_regs_t *ddr = &c->fsl_ddr_config_reg; + const memctl_options_t *popts = &c->memctl_opts; + const struct common_timing_params *common_dimm = &c->common_timing_params; + unsigned short esdmode; /* Extended SDRAM mode */ + unsigned short sdmode; /* SDRAM mode */ + + /* + * FIXME: This ought to be pre-calculated in a + * technology-specific routine, + * e.g. compute_DDR2_mode_register(), and then the + * sdmode and esdmode passed in as part of common_dimm. + */ + + /* Extended Mode Register */ + unsigned int mrs = 0; /* Mode Register Set */ + unsigned int outputs = 0; /* 0=Enabled, 1=Disabled */ + unsigned int rdqs_en = 0; /* RDQS Enable: 0=no, 1=yes */ + unsigned int dqs_en = 0; /* DQS# Enable: 0=enable, 1=disable */ + unsigned int ocd = 0; /* 0x0=OCD not supported, + 0x7=OCD default state */ + unsigned int rtt; + unsigned int al; /* Posted CAS# additive latency (AL) */ + unsigned int ods = 0; /* Output Drive Strength: + 0 = Full strength (18ohm) + 1 = Reduced strength (4ohm) */ + unsigned int dll_en = 0; /* DLL Enable 0=Enable (Normal), + 1=Disable (Test/Debug) */ + + /* Mode Register (MR) */ + unsigned int mr; /* Mode Register Definition */ + unsigned int pd; /* Power-Down Mode */ + unsigned int wr; /* Write Recovery */ + unsigned int dll_res; /* DLL Reset */ + unsigned int mode; /* Normal=0 or Test=1 */ + unsigned int caslat = 0;/* CAS# latency */ + /* BT: Burst Type (0=Sequential, 1=Interleaved) */ + unsigned int bt; + unsigned int bl; /* BL: Burst Length */ + + dqs_en = !popts->dqs_config; + rtt = fsl_ddr_get_rtt(popts); + + al = additive_latency; + + esdmode = (0 + | ((mrs & 0x3) << 14) + | ((outputs & 0x1) << 12) + | ((rdqs_en & 0x1) << 11) + | ((dqs_en & 0x1) << 10) + | ((ocd & 0x7) << 7) + | ((rtt & 0x2) << 5) /* rtt field is split */ + | ((al & 0x7) << 3) + | ((rtt & 0x1) << 2) /* rtt field is split */ + | ((ods & 0x1) << 1) + | ((dll_en & 0x1) << 0) + ); + + mr = 0; /* FIXME: CHECKME */ + + /* + * 0 = Fast Exit (Normal) + * 1 = Slow Exit (Low Power) + */ + pd = 0; + + if (is_ddr1(popts)) + wr = 0; /* Historical */ + else + wr = picos_to_mclk(c, common_dimm->twr_ps); + + dll_res = 0; + mode = 0; + + if (is_ddr1(popts)) { + if (1 <= cas_latency && cas_latency <= 4) { + unsigned char mode_caslat_table[4] = { + 0x5, /* 1.5 clocks */ + 0x2, /* 2.0 clocks */ + 0x6, /* 2.5 clocks */ + 0x3 /* 3.0 clocks */ + }; + caslat = mode_caslat_table[cas_latency - 1]; + } else { + printf("Warning: unknown cas_latency %d\n", cas_latency); + } + } else if (is_ddr2(popts)) { + caslat = cas_latency; + } + + bt = 0; + + switch (popts->burst_length) { + case DDR_BL4: + bl = 2; + break; + case DDR_BL8: + bl = 3; + break; + default: + printf("Error: invalid burst length of %u specified. " + " Defaulting to 4 beats.\n", + popts->burst_length); + bl = 2; + break; + } + + sdmode = (0 + | ((mr & 0x3) << 14) + | ((pd & 0x1) << 12) + | ((wr & 0x7) << 9) + | ((dll_res & 0x1) << 8) + | ((mode & 0x1) << 7) + | ((caslat & 0x7) << 4) + | ((bt & 0x1) << 3) + | ((bl & 0x7) << 0) + ); + + ddr->ddr_sdram_mode = (0 + | ((esdmode & 0xFFFF) << 16) + | ((sdmode & 0xFFFF) << 0) + ); + debug("FSLDDR: ddr_sdram_mode = 0x%08x\n", ddr->ddr_sdram_mode); +} + +/* + * DDR SDRAM Clock Control (DDR_SDRAM_CLK_CNTL) + * The old controller on the 8540/60 doesn't have this register. + * Hope it's OK to set it (to 0) anyway. + */ +static void set_ddr_sdram_clk_cntl(struct fsl_ddr_controller *c) +{ + fsl_ddr_cfg_regs_t *ddr = &c->fsl_ddr_config_reg; + const memctl_options_t *popts = &c->memctl_opts; + unsigned int clk_adjust; /* Clock adjust */ + unsigned int ss_en = 0; /* Source synchronous enable */ + + if (fsl_ddr_get_version(c) >= 0x40701) { + /* clk_adjust in 5-bits on T-series and LS-series */ + clk_adjust = (popts->clk_adjust & 0x1F) << 22; + } else { + /* clk_adjust in 4-bits on earlier MPC85xx and P-series */ + clk_adjust = (popts->clk_adjust & 0xF) << 23; + } + + ddr->ddr_sdram_clk_cntl = (0 + | ((ss_en & 0x1) << 31) + | clk_adjust + ); + debug("FSLDDR: clk_cntl = 0x%08x\n", ddr->ddr_sdram_clk_cntl); +} + +/* DDR Initialization Address (DDR_INIT_ADDR) */ +static void set_ddr_init_addr(struct fsl_ddr_controller *c) +{ + fsl_ddr_cfg_regs_t *ddr = &c->fsl_ddr_config_reg; + unsigned int init_addr = 0; /* Initialization address */ + + ddr->ddr_init_addr = init_addr; +} + +/* DDR Initialization Address (DDR_INIT_EXT_ADDR) */ +static void set_ddr_init_ext_addr(struct fsl_ddr_controller *c) +{ + fsl_ddr_cfg_regs_t *ddr = &c->fsl_ddr_config_reg; + unsigned int uia = 0; /* Use initialization address */ + unsigned int init_ext_addr = 0; /* Initialization address */ + + ddr->ddr_init_ext_addr = (0 + | ((uia & 0x1) << 31) + | (init_ext_addr & 0xF) + ); +} + +/* DDR SDRAM Timing Configuration 4 (TIMING_CFG_4) */ +static void set_timing_cfg_4(struct fsl_ddr_controller *c) +{ + fsl_ddr_cfg_regs_t *ddr = &c->fsl_ddr_config_reg; + const memctl_options_t *popts = &c->memctl_opts; + unsigned int rwt = 0; /* Read-to-write turnaround for same CS */ + unsigned int wrt = 0; /* Write-to-read turnaround for same CS */ + unsigned int rrt = 0; /* Read-to-read turnaround for same CS */ + unsigned int wwt = 0; /* Write-to-write turnaround for same CS */ + unsigned int trwt_mclk = 0; /* ext_rwt */ + unsigned int dll_lock = 0; /* DDR SDRAM DLL Lock Time */ + + if (is_ddr3_4(popts)) { + if (popts->burst_length == DDR_BL8) { + /* We set BL/2 for fixed BL8 */ + rrt = 0; /* BL/2 clocks */ + wwt = 0; /* BL/2 clocks */ + } else { + /* We need to set BL/2 + 2 to BC4 and OTF */ + rrt = 2; /* BL/2 + 2 clocks */ + wwt = 2; /* BL/2 + 2 clocks */ + } + } + + if (is_ddr4(popts)) + dll_lock = 2; /* tDLLK = 1024 clocks */ + else if (is_ddr3(popts)) + dll_lock = 1; /* tDLLK = 512 clocks from spec */ + + if (popts->trwt_override) + trwt_mclk = popts->trwt; + + ddr->timing_cfg_4 = (0 + | ((rwt & 0xf) << 28) + | ((wrt & 0xf) << 24) + | ((rrt & 0xf) << 20) + | ((wwt & 0xf) << 16) + | ((trwt_mclk & 0xc) << 12) + | (dll_lock & 0x3) + ); + debug("FSLDDR: timing_cfg_4 = 0x%08x\n", ddr->timing_cfg_4); +} + +/* DDR SDRAM Timing Configuration 5 (TIMING_CFG_5) */ +static void set_timing_cfg_5(struct fsl_ddr_controller *c, unsigned int cas_latency) +{ + fsl_ddr_cfg_regs_t *ddr = &c->fsl_ddr_config_reg; + const memctl_options_t *popts = &c->memctl_opts; + unsigned int rodt_on = 0; /* Read to ODT on */ + unsigned int rodt_off = 0; /* Read to ODT off */ + unsigned int wodt_on = 0; /* Write to ODT on */ + unsigned int wodt_off = 0; /* Write to ODT off */ + + if (is_ddr3_4(popts)) { + unsigned int wr_lat = ((ddr->timing_cfg_2 & 0x00780000) >> 19) + + ((ddr->timing_cfg_2 & 0x00040000) >> 14); + /* rodt_on = timing_cfg_1[caslat] - timing_cfg_2[wrlat] + 1 */ + if (cas_latency >= wr_lat) + rodt_on = cas_latency - wr_lat + 1; + rodt_off = 4; /* 4 clocks */ + wodt_on = 1; /* 1 clocks */ + wodt_off = 4; /* 4 clocks */ + } + + ddr->timing_cfg_5 = (0 + | ((rodt_on & 0x1f) << 24) + | ((rodt_off & 0x7) << 20) + | ((wodt_on & 0x1f) << 12) + | ((wodt_off & 0x7) << 8) + ); + debug("FSLDDR: timing_cfg_5 = 0x%08x\n", ddr->timing_cfg_5); +} + +static void set_timing_cfg_6(struct fsl_ddr_controller *c) +{ + fsl_ddr_cfg_regs_t *ddr = &c->fsl_ddr_config_reg; + unsigned int hs_caslat = 0; + unsigned int hs_wrlat = 0; + unsigned int hs_wrrec = 0; + unsigned int hs_clkadj = 0; + unsigned int hs_wrlvl_start = 0; + + ddr->timing_cfg_6 = (0 + | ((hs_caslat & 0x1f) << 24) + | ((hs_wrlat & 0x1f) << 19) + | ((hs_wrrec & 0x1f) << 12) + | ((hs_clkadj & 0x1f) << 6) + | ((hs_wrlvl_start & 0x1f) << 0) + ); + debug("FSLDDR: timing_cfg_6 = 0x%08x\n", ddr->timing_cfg_6); +} + +static void set_timing_cfg_7(struct fsl_ddr_controller *c) +{ + fsl_ddr_cfg_regs_t *ddr = &c->fsl_ddr_config_reg; + const memctl_options_t *popts = &c->memctl_opts; + const struct common_timing_params *common_dimm = &c->common_timing_params; + unsigned int txpr, tcksre, tcksrx; + unsigned int cke_rst, cksre, cksrx, par_lat = 0, cs_to_cmd; + const unsigned int mclk_ps = get_memory_clk_period_ps(c); + + txpr = max(5U, picos_to_mclk(c, common_dimm->trfc1_ps + 10000)); + tcksre = max(5U, picos_to_mclk(c, 10000)); + tcksrx = max(5U, picos_to_mclk(c, 10000)); + + if (ddr->ddr_sdram_cfg_2 & SDRAM_CFG2_AP_EN && is_ddr4(popts)) { + /* for DDR4 only */ + par_lat = (ddr->ddr_sdram_rcw_2 & 0xf) + 1; + debug("PAR_LAT = %u for mclk_ps = %d\n", par_lat, mclk_ps); + } + + cs_to_cmd = 0; + + if (txpr <= 200) + cke_rst = 0; + else if (txpr <= 256) + cke_rst = 1; + else if (txpr <= 512) + cke_rst = 2; + else + cke_rst = 3; + + if (tcksre <= 19) + cksre = tcksre - 5; + else + cksre = 15; + + if (tcksrx <= 19) + cksrx = tcksrx - 5; + else + cksrx = 15; + + ddr->timing_cfg_7 = (0 + | ((cke_rst & 0x3) << 28) + | ((cksre & 0xf) << 24) + | ((cksrx & 0xf) << 20) + | ((par_lat & 0xf) << 16) + | ((cs_to_cmd & 0xf) << 4) + ); + debug("FSLDDR: timing_cfg_7 = 0x%08x\n", ddr->timing_cfg_7); +} + +static void set_timing_cfg_8(struct fsl_ddr_controller *c, unsigned int cas_latency) +{ + fsl_ddr_cfg_regs_t *ddr = &c->fsl_ddr_config_reg; + const memctl_options_t *popts = &c->memctl_opts; + const struct common_timing_params *common_dimm = &c->common_timing_params; + int rwt_bg, wrt_bg, rrt_bg, wwt_bg; + unsigned int acttoact_bg, wrtord_bg, pre_all_rec; + int tccdl = picos_to_mclk(c, common_dimm->tccdl_ps); + int wr_lat = ((ddr->timing_cfg_2 & 0x00780000) >> 19) + + ((ddr->timing_cfg_2 & 0x00040000) >> 14); + + rwt_bg = cas_latency + 2 + 4 - wr_lat; + if (rwt_bg < tccdl) + rwt_bg = tccdl - rwt_bg; + else + rwt_bg = 0; + + wrt_bg = wr_lat + 4 + 1 - cas_latency; + if (wrt_bg < tccdl) + wrt_bg = tccdl - wrt_bg; + else + wrt_bg = 0; + + if (popts->burst_length == DDR_BL8) { + rrt_bg = tccdl - 4; + wwt_bg = tccdl - 4; + } else { + rrt_bg = tccdl - 2; + wwt_bg = tccdl - 2; + } + + acttoact_bg = picos_to_mclk(c, common_dimm->trrdl_ps); + wrtord_bg = max(4U, picos_to_mclk(c, 7500)); + if (popts->otf_burst_chop_en) + wrtord_bg += 2; + + pre_all_rec = 0; + + ddr->timing_cfg_8 = (0 + | ((rwt_bg & 0xf) << 28) + | ((wrt_bg & 0xf) << 24) + | ((rrt_bg & 0xf) << 20) + | ((wwt_bg & 0xf) << 16) + | ((acttoact_bg & 0xf) << 12) + | ((wrtord_bg & 0xf) << 8) + | ((pre_all_rec & 0x1f) << 0) + ); + + debug("FSLDDR: timing_cfg_8 = 0x%08x\n", ddr->timing_cfg_8); +} + +static void set_timing_cfg_9(struct fsl_ddr_controller *c) +{ + fsl_ddr_cfg_regs_t *ddr = &c->fsl_ddr_config_reg; + const memctl_options_t *popts = &c->memctl_opts; + const struct common_timing_params *common_dimm = &c->common_timing_params; + unsigned int refrec_cid_mclk = 0; + unsigned int acttoact_cid_mclk = 0; + + if (popts->package_3ds) { + refrec_cid_mclk = + picos_to_mclk(c, common_dimm->trfc_slr_ps); + acttoact_cid_mclk = 4U; /* tRRDS_slr */ + } + + ddr->timing_cfg_9 = (refrec_cid_mclk & 0x3ff) << 16 | + (acttoact_cid_mclk & 0xf) << 8; + + debug("FSLDDR: timing_cfg_9 = 0x%08x\n", ddr->timing_cfg_9); +} + +/* This function needs to be called after set_ddr_sdram_cfg() is called */ +static void set_ddr_dq_mapping(struct fsl_ddr_controller *c) +{ + fsl_ddr_cfg_regs_t *ddr = &c->fsl_ddr_config_reg; + const struct dimm_params *dimm_params = c->dimm_params; + unsigned int acc_ecc_en = (ddr->ddr_sdram_cfg >> 2) & 0x1; + int i; + + for (i = 0; i < c->dimm_slots_per_ctrl; i++) { + if (dimm_params[i].n_ranks) + break; + } + if (i >= c->dimm_slots_per_ctrl) { + printf("DDR error: no DIMM found!\n"); + return; + } + + ddr->dq_map_0 = ((dimm_params[i].dq_mapping[0] & 0x3F) << 26) | + ((dimm_params[i].dq_mapping[1] & 0x3F) << 20) | + ((dimm_params[i].dq_mapping[2] & 0x3F) << 14) | + ((dimm_params[i].dq_mapping[3] & 0x3F) << 8) | + ((dimm_params[i].dq_mapping[4] & 0x3F) << 2); + + ddr->dq_map_1 = ((dimm_params[i].dq_mapping[5] & 0x3F) << 26) | + ((dimm_params[i].dq_mapping[6] & 0x3F) << 20) | + ((dimm_params[i].dq_mapping[7] & 0x3F) << 14) | + ((dimm_params[i].dq_mapping[10] & 0x3F) << 8) | + ((dimm_params[i].dq_mapping[11] & 0x3F) << 2); + + ddr->dq_map_2 = ((dimm_params[i].dq_mapping[12] & 0x3F) << 26) | + ((dimm_params[i].dq_mapping[13] & 0x3F) << 20) | + ((dimm_params[i].dq_mapping[14] & 0x3F) << 14) | + ((dimm_params[i].dq_mapping[15] & 0x3F) << 8) | + ((dimm_params[i].dq_mapping[16] & 0x3F) << 2); + + /* dq_map for ECC[4:7] is set to 0 if accumulated ECC is enabled */ + ddr->dq_map_3 = ((dimm_params[i].dq_mapping[17] & 0x3F) << 26) | + ((dimm_params[i].dq_mapping[8] & 0x3F) << 20) | + (acc_ecc_en ? 0 : + (dimm_params[i].dq_mapping[9] & 0x3F) << 14) | + dimm_params[i].dq_mapping_ors; + + debug("FSLDDR: dq_map_0 = 0x%08x\n", ddr->dq_map_0); + debug("FSLDDR: dq_map_1 = 0x%08x\n", ddr->dq_map_1); + debug("FSLDDR: dq_map_2 = 0x%08x\n", ddr->dq_map_2); + debug("FSLDDR: dq_map_3 = 0x%08x\n", ddr->dq_map_3); +} +static void set_ddr_sdram_cfg_3(struct fsl_ddr_controller *c) +{ + fsl_ddr_cfg_regs_t *ddr = &c->fsl_ddr_config_reg; + const memctl_options_t *popts = &c->memctl_opts; + int rd_pre; + + rd_pre = popts->quad_rank_present ? 1 : 0; + + ddr->ddr_sdram_cfg_3 = (rd_pre & 0x1) << 16; + /* Disable MRS on parity error for RDIMMs */ + ddr->ddr_sdram_cfg_3 |= popts->registered_dimm_en ? 1 : 0; + + if (popts->package_3ds) { /* only 2,4,8 are supported */ + if ((popts->package_3ds + 1) & 0x1) { + printf("Error: Unsupported 3DS DIMM with %d die\n", + popts->package_3ds + 1); + } else { + ddr->ddr_sdram_cfg_3 |= ((popts->package_3ds + 1) >> 1) + << 4; + } + } + + debug("FSLDDR: ddr_sdram_cfg_3 = 0x%08x\n", ddr->ddr_sdram_cfg_3); +} + +/* DDR ZQ Calibration Control (DDR_ZQ_CNTL) */ +static void set_ddr_zq_cntl(struct fsl_ddr_controller *c, + unsigned int zq_en) +{ + fsl_ddr_cfg_regs_t *ddr = &c->fsl_ddr_config_reg; + const memctl_options_t *popts = &c->memctl_opts; + unsigned int zqinit; /* POR ZQ Calibration Time (tZQinit) */ + unsigned int zqoper; /* Normal Operation Full Calibration Time (tZQoper) */ + unsigned int zqcs; /* Normal Operation Short Calibration Time (tZQCS) */ + unsigned int zqcs_init; + + if (!zq_en) { + ddr->ddr_zq_cntl = 0; + goto out; + } + + if (is_ddr4(popts)) { + zqinit = 10; /* 1024 clocks */ + zqoper = 9; /* 512 clocks */ + zqcs = 7; /* 128 clocks */ + zqcs_init = 5; /* 1024 refresh sequences */ + } else { + zqinit = 9; /* 512 clocks */ + zqoper = 8; /* 256 clocks */ + zqcs = 6; /* 64 clocks */ + zqcs_init = 0; + } + + ddr->ddr_zq_cntl = ((zq_en & 0x1) << 31) + | ((zqinit & 0xF) << 24) + | ((zqoper & 0xF) << 16) + | ((zqcs & 0xF) << 8) + | (zqcs_init & 0xF); + +out: + debug("FSLDDR: zq_cntl = 0x%08x\n", ddr->ddr_zq_cntl); +} + +/* DDR Write Leveling Control (DDR_WRLVL_CNTL) */ +static void set_ddr_wrlvl_cntl(struct fsl_ddr_controller *c, unsigned int wrlvl_en) +{ + fsl_ddr_cfg_regs_t *ddr = &c->fsl_ddr_config_reg; + const memctl_options_t *popts = &c->memctl_opts; + + /* + * First DQS pulse rising edge after margining mode + * is programmed (tWL_MRD) + */ + unsigned int wrlvl_mrd = 0; + /* ODT delay after margining mode is programmed (tWL_ODTEN) */ + unsigned int wrlvl_odten = 0; + /* DQS/DQS_ delay after margining mode is programmed (tWL_DQSEN) */ + unsigned int wrlvl_dqsen = 0; + /* WRLVL_SMPL: Write leveling sample time */ + unsigned int wrlvl_smpl = 0; + /* WRLVL_WLR: Write leveling repeition time */ + unsigned int wrlvl_wlr = 0; + /* WRLVL_START: Write leveling start time */ + unsigned int wrlvl_start = 0; + + /* suggest enable write leveling for DDR3 due to fly-by topology */ + if (wrlvl_en) { + /* tWL_MRD min = 40 nCK, we set it 64 */ + wrlvl_mrd = 0x6; + /* tWL_ODTEN 128 */ + wrlvl_odten = 0x7; + /* tWL_DQSEN min = 25 nCK, we set it 32 */ + wrlvl_dqsen = 0x5; + /* + * Write leveling sample time at least need 6 clocks + * higher than tWLO to allow enough time for progagation + * delay and sampling the prime data bits. + */ + wrlvl_smpl = 0xf; + /* + * Write leveling repetition time + * at least tWLO + 6 clocks clocks + * we set it 64 + */ + wrlvl_wlr = 0x6; + /* + * Write leveling start time + * The value use for the DQS_ADJUST for the first sample + * when write leveling is enabled. It probably needs to be + * overridden per platform. + */ + wrlvl_start = 0x8; + /* + * Override the write leveling sample and start time + * according to specific board + */ + if (popts->wrlvl_override) { + wrlvl_smpl = popts->wrlvl_sample; + wrlvl_start = popts->wrlvl_start; + } + } + + ddr->ddr_wrlvl_cntl = (0 + | ((wrlvl_en & 0x1) << 31) + | ((wrlvl_mrd & 0x7) << 24) + | ((wrlvl_odten & 0x7) << 20) + | ((wrlvl_dqsen & 0x7) << 16) + | ((wrlvl_smpl & 0xf) << 12) + | ((wrlvl_wlr & 0x7) << 8) + | ((wrlvl_start & 0x1F) << 0) + ); + debug("FSLDDR: wrlvl_cntl = 0x%08x\n", ddr->ddr_wrlvl_cntl); + ddr->ddr_wrlvl_cntl_2 = popts->wrlvl_ctl_2; + debug("FSLDDR: wrlvl_cntl_2 = 0x%08x\n", ddr->ddr_wrlvl_cntl_2); + ddr->ddr_wrlvl_cntl_3 = popts->wrlvl_ctl_3; + debug("FSLDDR: wrlvl_cntl_3 = 0x%08x\n", ddr->ddr_wrlvl_cntl_3); + +} + +/* DDR Self Refresh Counter (DDR_SR_CNTR) */ +static void set_ddr_sr_cntr(struct fsl_ddr_controller *c, unsigned int sr_it) +{ + fsl_ddr_cfg_regs_t *ddr = &c->fsl_ddr_config_reg; + + /* Self Refresh Idle Threshold */ + ddr->ddr_sr_cntr = (sr_it & 0xF) << 16; +} + +static void set_ddr_eor(struct fsl_ddr_controller *c) +{ + fsl_ddr_cfg_regs_t *ddr = &c->fsl_ddr_config_reg; + const memctl_options_t *popts = &c->memctl_opts; + + if (popts->addr_hash) { + ddr->ddr_eor = 0x40000000; /* address hash enable */ + printf("Address hashing enabled.\n"); + } +} + +static void set_ddr_cdr1(struct fsl_ddr_controller *c) +{ + fsl_ddr_cfg_regs_t *ddr = &c->fsl_ddr_config_reg; + const memctl_options_t *popts = &c->memctl_opts; + + ddr->ddr_cdr1 = popts->ddr_cdr1; + debug("FSLDDR: ddr_cdr1 = 0x%08x\n", ddr->ddr_cdr1); +} + +static void set_ddr_cdr2(struct fsl_ddr_controller *c) +{ + fsl_ddr_cfg_regs_t *ddr = &c->fsl_ddr_config_reg; + const memctl_options_t *popts = &c->memctl_opts; + + ddr->ddr_cdr2 = popts->ddr_cdr2; + debug("FSLDDR: ddr_cdr2 = 0x%08x\n", ddr->ddr_cdr2); +} + +static unsigned int +check_fsl_memctl_config_regs(struct fsl_ddr_controller *c) +{ + fsl_ddr_cfg_regs_t *ddr = &c->fsl_ddr_config_reg; + unsigned int res = 0; + + /* + * Check that DDR_SDRAM_CFG[RD_EN] and DDR_SDRAM_CFG[2T_EN] are + * not set at the same time. + */ + if (ddr->ddr_sdram_cfg & 0x10000000 + && ddr->ddr_sdram_cfg & 0x00008000) { + printf("Error: DDR_SDRAM_CFG[RD_EN] and DDR_SDRAM_CFG[2T_EN] " + " should not be set at the same time.\n"); + res++; + } + + return res; +} + +unsigned int +compute_fsl_memctl_config_regs(struct fsl_ddr_controller *c) +{ + const memctl_options_t *popts = &c->memctl_opts; + fsl_ddr_cfg_regs_t *ddr = &c->fsl_ddr_config_reg; + const struct common_timing_params *common_dimm = &c->common_timing_params; + const struct dimm_params *dimm_params = c->dimm_params; + unsigned int i; + unsigned int cas_latency; + unsigned int additive_latency; + unsigned int sr_it; + unsigned int wrlvl_en; + unsigned int ip_rev = 0; + unsigned int unq_mrs_en = 0; + int cs_en = 1; + unsigned int ddr_freq; + struct ccsr_ddr __iomem *ddrc = c->base; + + memset(ddr, 0, sizeof(fsl_ddr_cfg_regs_t)); + + if (common_dimm == NULL) { + printf("Error: subset DIMM params struct null pointer\n"); + return 1; + } + + /* + * Process overrides first. + * + * FIXME: somehow add dereated caslat to this + */ + cas_latency = (popts->cas_latency_override) + ? popts->cas_latency_override_value + : common_dimm->lowest_common_spd_caslat; + + additive_latency = (popts->additive_latency_override) + ? popts->additive_latency_override_value + : common_dimm->additive_latency; + + sr_it = (popts->auto_self_refresh_en) + ? popts->sr_it + : 0; + /* write leveling */ + wrlvl_en = (popts->wrlvl_en) ? 1 : 0; + + /* Chip Select Memory Bounds (CSn_BNDS) */ + for (i = 0; i < c->chip_selects_per_ctrl; i++) { + unsigned long long ea, sa; + unsigned int cs_per_dimm + = c->chip_selects_per_ctrl / c->dimm_slots_per_ctrl; + unsigned int dimm_number + = i / cs_per_dimm; + unsigned long long rank_density + = dimm_params[dimm_number].rank_density >> c->dbw_capacity_adjust; + + if (dimm_params[dimm_number].n_ranks == 0) { + debug("Skipping setup of CS%u " + "because n_ranks on DIMM %u is 0\n", i, dimm_number); + continue; + } + if (popts->memctl_interleaving) { + switch (popts->ba_intlv_ctl & FSL_DDR_CS0_CS1_CS2_CS3) { + case FSL_DDR_CS0_CS1_CS2_CS3: + break; + case FSL_DDR_CS0_CS1: + case FSL_DDR_CS0_CS1_AND_CS2_CS3: + if (i > 1) + cs_en = 0; + break; + case FSL_DDR_CS2_CS3: + default: + if (i > 0) + cs_en = 0; + break; + } + sa = common_dimm->base_address; + ea = sa + common_dimm->total_mem - 1; + } else if (!popts->memctl_interleaving) { + /* + * If memory interleaving between controllers is NOT + * enabled, the starting address for each memory + * controller is distinct. However, because rank + * interleaving is enabled, the starting and ending + * addresses of the total memory on that memory + * controller needs to be programmed into its + * respective CS0_BNDS. + */ + switch (popts->ba_intlv_ctl & FSL_DDR_CS0_CS1_CS2_CS3) { + case FSL_DDR_CS0_CS1_CS2_CS3: + sa = common_dimm->base_address; + ea = sa + common_dimm->total_mem - 1; + break; + case FSL_DDR_CS0_CS1_AND_CS2_CS3: + if ((i >= 2) && (dimm_number == 0)) { + sa = dimm_params[dimm_number].base_address + + 2 * rank_density; + ea = sa + 2 * rank_density - 1; + } else { + sa = dimm_params[dimm_number].base_address; + ea = sa + 2 * rank_density - 1; + } + break; + case FSL_DDR_CS0_CS1: + if (dimm_params[dimm_number].n_ranks > (i % cs_per_dimm)) { + sa = dimm_params[dimm_number].base_address; + ea = sa + rank_density - 1; + if (i != 1) + sa += (i % cs_per_dimm) * rank_density; + ea += (i % cs_per_dimm) * rank_density; + } else { + sa = 0; + ea = 0; + } + if (i == 0) + ea += rank_density; + break; + case FSL_DDR_CS2_CS3: + if (dimm_params[dimm_number].n_ranks > (i % cs_per_dimm)) { + sa = dimm_params[dimm_number].base_address; + ea = sa + rank_density - 1; + if (i != 3) + sa += (i % cs_per_dimm) * rank_density; + ea += (i % cs_per_dimm) * rank_density; + } else { + sa = 0; + ea = 0; + } + if (i == 2) + ea += (rank_density >> c->dbw_capacity_adjust); + break; + default: /* No bank(chip-select) interleaving */ + sa = dimm_params[dimm_number].base_address; + ea = sa + rank_density - 1; + if (dimm_params[dimm_number].n_ranks > (i % cs_per_dimm)) { + sa += (i % cs_per_dimm) * rank_density; + ea += (i % cs_per_dimm) * rank_density; + } else { + sa = 0; + ea = 0; + } + break; + } + } + + sa >>= 24; + ea >>= 24; + + if (cs_en) { + ddr->cs[i].bnds = (0 + | ((sa & 0xffff) << 16) /* starting address */ + | ((ea & 0xffff) << 0) /* ending address */ + ); + } else { + /* setting bnds to 0xffffffff for inactive CS */ + ddr->cs[i].bnds = 0xffffffff; + } + + debug("FSLDDR: cs[%d]_bnds = 0x%08x\n", i, ddr->cs[i].bnds); + set_csn_config(dimm_number, i, ddr, popts, dimm_params); + set_csn_config_2(i, ddr); + } + + set_ddr_eor(c); + + if (!is_ddr1(popts)) + set_timing_cfg_0(c); + + set_timing_cfg_3(c, cas_latency, + additive_latency); + set_timing_cfg_1(c, cas_latency); + set_timing_cfg_2(c, cas_latency, additive_latency); + + set_ddr_cdr1(c); + set_ddr_cdr2(c); + set_ddr_sdram_cfg(c); + ip_rev = fsl_ddr_get_version(c); + if (ip_rev > 0x40400) + unq_mrs_en = 1; + + if ((ip_rev > 0x40700) && (popts->cswl_override != 0)) + ddr->debug[18] = popts->cswl_override; + + set_ddr_sdram_cfg_2(c, unq_mrs_en); + if (is_ddr4(popts)) { + set_ddr_sdram_mode_ddr4(c, cas_latency, additive_latency, unq_mrs_en); + set_ddr4_sdram_mode_2(c, unq_mrs_en); + set_ddr_sdram_mode_9(c, unq_mrs_en); + set_ddr_sdram_mode_10(c, unq_mrs_en); + } else if (is_ddr3(popts)) { + set_ddr_sdram_mode_ddr3(c, cas_latency, additive_latency, unq_mrs_en); + set_ddr3_sdram_mode_2(c, unq_mrs_en); + } else { + set_ddr_sdram_mode_ddr12(c, cas_latency, additive_latency, unq_mrs_en); + set_ddr1_2_sdram_mode_2(c, unq_mrs_en); + } + + set_ddr_sdram_rcw(c); + + set_ddr_sdram_interval(c); + + ddr->ddr_data_init = 0xdeadbeef; + + set_ddr_sdram_clk_cntl(c); + set_ddr_init_addr(c); + set_ddr_init_ext_addr(c); + set_timing_cfg_4(c); + set_timing_cfg_5(c, cas_latency); + + if (is_ddr4(popts)) { + set_ddr_sdram_cfg_3(c); + set_timing_cfg_6(c); + set_timing_cfg_7(c); + set_timing_cfg_8(c, cas_latency); + set_timing_cfg_9(c); + set_ddr_dq_mapping(c); + } + + set_ddr_zq_cntl(c, popts->zq_en); + set_ddr_wrlvl_cntl(c, wrlvl_en); + + set_ddr_sr_cntr(c, sr_it); + + if (c->erratum_A004508 && ip_rev >= 0x40000 && ip_rev < 0x40400) + ddr->debug[2] |= 0x00000200; /* set bit 22 */ + + /* Erratum applies when accumulated ECC is used, or DBI is enabled */ +#define IS_ACC_ECC_EN(v) ((v) & 0x4) +#define IS_DBI(v) ((((v) >> 12) & 0x3) == 0x2) + if (c->erratum_A008378) { + if (IS_ACC_ECC_EN(ddr->ddr_sdram_cfg) || + IS_DBI(ddr->ddr_sdram_cfg_3)) { + ddr->debug[28] = ddr_in32(&ddrc->debug[28]); + ddr->debug[28] |= (0x9 << 20); + } + } + + if (c->erratum_A009942) { + ddr_freq = c->ddr_freq / 1000000; + ddr->debug[28] |= ddr_in32(&ddrc->debug[28]); + ddr->debug[28] &= 0xff0fff00; + if (ddr_freq <= 1333) + ddr->debug[28] |= 0x0080006a; + else if (ddr_freq <= 1600) + ddr->debug[28] |= 0x0070006f; + else if (ddr_freq <= 1867) + ddr->debug[28] |= 0x00700076; + else if (ddr_freq <= 2133) + ddr->debug[28] |= 0x0060007b; + if (popts->cpo_sample) + ddr->debug[28] = (ddr->debug[28] & 0xffffff00) | + popts->cpo_sample; + } + + return check_fsl_memctl_config_regs(c); +} diff --git a/drivers/ddr/fsl/ddr1_dimm_params.c b/drivers/ddr/fsl/ddr1_dimm_params.c new file mode 100644 index 0000000000..268bf5bde4 --- /dev/null +++ b/drivers/ddr/fsl/ddr1_dimm_params.c @@ -0,0 +1,319 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright 2008 Freescale Semiconductor, Inc. + */ +#include <common.h> +#include <soc/fsl/fsl_ddr_sdram.h> +#include <linux/log2.h> +#include "fsl_ddr.h" + +/* + * Calculate the Density of each Physical Rank. + * Returned size is in bytes. + * + * Study these table from Byte 31 of JEDEC SPD Spec. + * + * DDR I DDR II + * Bit Size Size + * --- ----- ------ + * 7 high 512MB 512MB + * 6 256MB 256MB + * 5 128MB 128MB + * 4 64MB 16GB + * 3 32MB 8GB + * 2 16MB 4GB + * 1 2GB 2GB + * 0 low 1GB 1GB + * + * Reorder Table to be linear by stripping the bottom + * 2 or 5 bits off and shifting them up to the top. + */ + +static unsigned long long +compute_ranksize(unsigned int mem_type, unsigned char row_dens) +{ + unsigned long long bsize; + + /* Bottom 2 bits up to the top. */ + bsize = ((row_dens >> 2) | ((row_dens & 3) << 6)); + bsize <<= 24ULL; + debug("DDR: DDR I rank density = 0x%16llx\n", bsize); + + return bsize; +} + +/* + * Convert a two-nibble BCD value into a cycle time. + * While the spec calls for nano-seconds, picos are returned. + * + * This implements the tables for bytes 9, 23 and 25 for both + * DDR I and II. No allowance for distinguishing the invalid + * fields absent for DDR I yet present in DDR II is made. + * (That is, cycle times of .25, .33, .66 and .75 ns are + * allowed for both DDR II and I.) + */ +static unsigned int +convert_bcd_tenths_to_cycle_time_ps(unsigned int spd_val) +{ + /* Table look up the lower nibble, allow DDR I & II. */ + unsigned int tenths_ps[16] = { + 0, + 100, + 200, + 300, + 400, + 500, + 600, + 700, + 800, + 900, + 250, /* This and the next 3 entries valid ... */ + 330, /* ... only for tCK calculations. */ + 660, + 750, + 0, /* undefined */ + 0 /* undefined */ + }; + + unsigned int whole_ns = (spd_val & 0xF0) >> 4; + unsigned int tenth_ns = spd_val & 0x0F; + unsigned int ps = whole_ns * 1000 + tenths_ps[tenth_ns]; + + return ps; +} + +static unsigned int +convert_bcd_hundredths_to_cycle_time_ps(unsigned int spd_val) +{ + unsigned int tenth_ns = (spd_val & 0xF0) >> 4; + unsigned int hundredth_ns = spd_val & 0x0F; + unsigned int ps = tenth_ns * 100 + hundredth_ns * 10; + + return ps; +} + +static unsigned int byte40_table_ps[8] = { + 0, + 250, + 330, + 500, + 660, + 750, + 0, /* supposed to be RFC, but not sure what that means */ + 0 /* Undefined */ +}; + +static unsigned int +compute_trfc_ps_from_spd(unsigned char trctrfc_ext, unsigned char trfc) +{ + return ((trctrfc_ext & 0x1) * 256 + trfc) * 1000 + + byte40_table_ps[(trctrfc_ext >> 1) & 0x7]; +} + +static unsigned int +compute_trc_ps_from_spd(unsigned char trctrfc_ext, unsigned char trc) +{ + return trc * 1000 + byte40_table_ps[(trctrfc_ext >> 4) & 0x7]; +} + +/* + * tCKmax from DDR I SPD Byte 43 + * + * Bits 7:2 == whole ns + * Bits 1:0 == quarter ns + * 00 == 0.00 ns + * 01 == 0.25 ns + * 10 == 0.50 ns + * 11 == 0.75 ns + * + * Returns picoseconds. + */ +static unsigned int +compute_tckmax_from_spd_ps(unsigned int byte43) +{ + return (byte43 >> 2) * 1000 + (byte43 & 0x3) * 250; +} + +/* + * Determine Refresh Rate. Ignore self refresh bit on DDR I. + * Table from SPD Spec, Byte 12, converted to picoseconds and + * filled in with "default" normal values. + */ +static unsigned int +determine_refresh_rate_ps(const unsigned int spd_refresh) +{ + unsigned int refresh_time_ps[8] = { + 15625000, /* 0 Normal 1.00x */ + 3900000, /* 1 Reduced .25x */ + 7800000, /* 2 Extended .50x */ + 31300000, /* 3 Extended 2.00x */ + 62500000, /* 4 Extended 4.00x */ + 125000000, /* 5 Extended 8.00x */ + 15625000, /* 6 Normal 1.00x filler */ + 15625000, /* 7 Normal 1.00x filler */ + }; + + return refresh_time_ps[spd_refresh & 0x7]; +} + +/* + * The purpose of this function is to compute a suitable + * CAS latency given the DRAM clock period. The SPD only + * defines at most 3 CAS latencies. Typically the slower in + * frequency the DIMM runs at, the shorter its CAS latency can be. + * If the DIMM is operating at a sufficiently low frequency, + * it may be able to run at a CAS latency shorter than the + * shortest SPD-defined CAS latency. + * + * If a CAS latency is not found, 0 is returned. + * + * Do this by finding in the standard speed bin table the longest + * tCKmin that doesn't exceed the value of mclk_ps (tCK). + * + * An assumption made is that the SDRAM device allows the + * CL to be programmed for a value that is lower than those + * advertised by the SPD. This is not always the case, + * as those modes not defined in the SPD are optional. + * + * CAS latency de-rating based upon values JEDEC Standard No. 79-E + * Table 11. + * + * ordinal 2, ddr1_speed_bins[1] contains tCK for CL=2 + */ + /* CL2.0 CL2.5 CL3.0 */ +unsigned short ddr1_speed_bins[] = {0, 7500, 6000, 5000 }; + +static unsigned int +compute_derated_DDR1_CAS_latency(unsigned int mclk_ps) +{ + const unsigned int num_speed_bins = ARRAY_SIZE(ddr1_speed_bins); + unsigned int lowest_tCKmin_found = 0; + unsigned int lowest_tCKmin_CL = 0; + unsigned int i; + + debug("mclk_ps = %u\n", mclk_ps); + + for (i = 0; i < num_speed_bins; i++) { + unsigned int x = ddr1_speed_bins[i]; + debug("i=%u, x = %u, lowest_tCKmin_found = %u\n", + i, x, lowest_tCKmin_found); + if (x && lowest_tCKmin_found <= x && x <= mclk_ps) { + lowest_tCKmin_found = x; + lowest_tCKmin_CL = i + 1; + } + } + + debug("lowest_tCKmin_CL = %u\n", lowest_tCKmin_CL); + + return lowest_tCKmin_CL; +} + +/* + * ddr1_compute_dimm_parameters for DDR1 SPD + * + * Compute DIMM parameters based upon the SPD information in spd. + * Writes the results to the struct dimm_params structure pointed by pdimm. + * + * FIXME: use #define for the retvals + */ +unsigned int ddr1_compute_dimm_parameters(struct fsl_ddr_controller *c, + const struct ddr1_spd_eeprom *spd, + struct dimm_params *pdimm) +{ + int ret; + + ret = ddr1_spd_check(spd); + if (ret) { + printf("DIMM: failed checksum\n"); + return 2; + } + + /* + * The part name in ASCII in the SPD EEPROM is not null terminated. + * Guarantee null termination here by presetting all bytes to 0 + * and copying the part name in ASCII from the SPD onto it + */ + memset(pdimm->mpart, 0, sizeof(pdimm->mpart)); + memcpy(pdimm->mpart, spd->mpart, sizeof(pdimm->mpart) - 1); + + /* DIMM organization parameters */ + pdimm->n_ranks = spd->nrows; + pdimm->rank_density = compute_ranksize(spd->mem_type, spd->bank_dens); + pdimm->capacity = pdimm->n_ranks * pdimm->rank_density; + pdimm->data_width = spd->dataw_lsb; + pdimm->primary_sdram_width = spd->primw; + pdimm->ec_sdram_width = spd->ecw; + + /* + * FIXME: Need to determine registered_dimm status. + * 1 == register buffered + * 0 == unbuffered + */ + pdimm->registered_dimm = 0; /* unbuffered */ + + /* SDRAM device parameters */ + pdimm->n_row_addr = spd->nrow_addr; + pdimm->n_col_addr = spd->ncol_addr; + pdimm->n_banks_per_sdram_device = spd->nbanks; + pdimm->edc_config = spd->config; + pdimm->burst_lengths_bitmask = spd->burstl; + + /* + * Calculate the Maximum Data Rate based on the Minimum Cycle time. + * The SPD clk_cycle field (tCKmin) is measured in tenths of + * nanoseconds and represented as BCD. + */ + pdimm->tckmin_x_ps + = convert_bcd_tenths_to_cycle_time_ps(spd->clk_cycle); + pdimm->tckmin_x_minus_1_ps + = convert_bcd_tenths_to_cycle_time_ps(spd->clk_cycle2); + pdimm->tckmin_x_minus_2_ps + = convert_bcd_tenths_to_cycle_time_ps(spd->clk_cycle3); + + pdimm->tckmax_ps = compute_tckmax_from_spd_ps(spd->tckmax); + + /* + * Compute CAS latencies defined by SPD + * The SPD caslat_x should have at least 1 and at most 3 bits set. + * + * If cas_lat after masking is 0, the __ilog2 function returns + * 255 into the variable. This behavior is abused once. + */ + pdimm->caslat_x = ilog2(spd->cas_lat); + pdimm->caslat_x_minus_1 = ilog2(spd->cas_lat + & ~(1 << pdimm->caslat_x)); + pdimm->caslat_x_minus_2 = ilog2(spd->cas_lat + & ~(1 << pdimm->caslat_x) + & ~(1 << pdimm->caslat_x_minus_1)); + + /* Compute CAS latencies below that defined by SPD */ + pdimm->caslat_lowest_derated = compute_derated_DDR1_CAS_latency( + get_memory_clk_period_ps(c)); + + /* Compute timing parameters */ + pdimm->trcd_ps = spd->trcd * 250; + pdimm->trp_ps = spd->trp * 250; + pdimm->tras_ps = spd->tras * 1000; + + pdimm->twr_ps = mclk_to_picos(c, 3); + pdimm->twtr_ps = mclk_to_picos(c, 1); + pdimm->trfc_ps = compute_trfc_ps_from_spd(0, spd->trfc); + + pdimm->trrd_ps = spd->trrd * 250; + pdimm->trc_ps = compute_trc_ps_from_spd(0, spd->trc); + + pdimm->refresh_rate_ps = determine_refresh_rate_ps(spd->refresh); + + pdimm->tis_ps = convert_bcd_hundredths_to_cycle_time_ps(spd->ca_setup); + pdimm->tih_ps = convert_bcd_hundredths_to_cycle_time_ps(spd->ca_hold); + pdimm->tds_ps + = convert_bcd_hundredths_to_cycle_time_ps(spd->data_setup); + pdimm->tdh_ps + = convert_bcd_hundredths_to_cycle_time_ps(spd->data_hold); + + pdimm->trtp_ps = mclk_to_picos(c, 2); /* By the book. */ + pdimm->tdqsq_max_ps = spd->tdqsq * 10; + pdimm->tqhs_ps = spd->tqhs * 10; + + return 0; +} diff --git a/drivers/ddr/fsl/ddr2_dimm_params.c b/drivers/ddr/fsl/ddr2_dimm_params.c new file mode 100644 index 0000000000..3f8b56330d --- /dev/null +++ b/drivers/ddr/fsl/ddr2_dimm_params.c @@ -0,0 +1,320 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright 2008 Freescale Semiconductor, Inc. + */ + +#include <common.h> +#include <soc/fsl/fsl_ddr_sdram.h> +#include <linux/log2.h> +#include "fsl_ddr.h" + +/* + * Calculate the Density of each Physical Rank. + * Returned size is in bytes. + * + * Study these table from Byte 31 of JEDEC SPD Spec. + * + * DDR I DDR II + * Bit Size Size + * --- ----- ------ + * 7 high 512MB 512MB + * 6 256MB 256MB + * 5 128MB 128MB + * 4 64MB 16GB + * 3 32MB 8GB + * 2 16MB 4GB + * 1 2GB 2GB + * 0 low 1GB 1GB + * + * Reorder Table to be linear by stripping the bottom + * 2 or 5 bits off and shifting them up to the top. + * + */ +static unsigned long long +compute_ranksize(unsigned int mem_type, unsigned char row_dens) +{ + unsigned long long bsize; + + /* Bottom 5 bits up to the top. */ + bsize = ((row_dens >> 5) | ((row_dens & 31) << 3)); + bsize <<= 27ULL; + debug("DDR: DDR II rank density = 0x%16llx\n", bsize); + + return bsize; +} + +/* + * Convert a two-nibble BCD value into a cycle time. + * While the spec calls for nano-seconds, picos are returned. + * + * This implements the tables for bytes 9, 23 and 25 for both + * DDR I and II. No allowance for distinguishing the invalid + * fields absent for DDR I yet present in DDR II is made. + * (That is, cycle times of .25, .33, .66 and .75 ns are + * allowed for both DDR II and I.) + */ +static unsigned int +convert_bcd_tenths_to_cycle_time_ps(unsigned int spd_val) +{ + /* Table look up the lower nibble, allow DDR I & II. */ + unsigned int tenths_ps[16] = { + 0, + 100, + 200, + 300, + 400, + 500, + 600, + 700, + 800, + 900, + 250, /* This and the next 3 entries valid ... */ + 330, /* ... only for tCK calculations. */ + 660, + 750, + 0, /* undefined */ + 0 /* undefined */ + }; + + unsigned int whole_ns = (spd_val & 0xF0) >> 4; + unsigned int tenth_ns = spd_val & 0x0F; + unsigned int ps = whole_ns * 1000 + tenths_ps[tenth_ns]; + + return ps; +} + +static unsigned int +convert_bcd_hundredths_to_cycle_time_ps(unsigned int spd_val) +{ + unsigned int tenth_ns = (spd_val & 0xF0) >> 4; + unsigned int hundredth_ns = spd_val & 0x0F; + unsigned int ps = tenth_ns * 100 + hundredth_ns * 10; + + return ps; +} + +static unsigned int byte40_table_ps[8] = { + 0, + 250, + 330, + 500, + 660, + 750, + 0, /* supposed to be RFC, but not sure what that means */ + 0 /* Undefined */ +}; + +static unsigned int +compute_trfc_ps_from_spd(unsigned char trctrfc_ext, unsigned char trfc) +{ + return (((trctrfc_ext & 0x1) * 256) + trfc) * 1000 + + byte40_table_ps[(trctrfc_ext >> 1) & 0x7]; +} + +static unsigned int +compute_trc_ps_from_spd(unsigned char trctrfc_ext, unsigned char trc) +{ + return trc * 1000 + byte40_table_ps[(trctrfc_ext >> 4) & 0x7]; +} + +/* + * Determine Refresh Rate. Ignore self refresh bit on DDR I. + * Table from SPD Spec, Byte 12, converted to picoseconds and + * filled in with "default" normal values. + */ +static unsigned int +determine_refresh_rate_ps(const unsigned int spd_refresh) +{ + unsigned int refresh_time_ps[8] = { + 15625000, /* 0 Normal 1.00x */ + 3900000, /* 1 Reduced .25x */ + 7800000, /* 2 Extended .50x */ + 31300000, /* 3 Extended 2.00x */ + 62500000, /* 4 Extended 4.00x */ + 125000000, /* 5 Extended 8.00x */ + 15625000, /* 6 Normal 1.00x filler */ + 15625000, /* 7 Normal 1.00x filler */ + }; + + return refresh_time_ps[spd_refresh & 0x7]; +} + +/* + * The purpose of this function is to compute a suitable + * CAS latency given the DRAM clock period. The SPD only + * defines at most 3 CAS latencies. Typically the slower in + * frequency the DIMM runs at, the shorter its CAS latency can. + * be. If the DIMM is operating at a sufficiently low frequency, + * it may be able to run at a CAS latency shorter than the + * shortest SPD-defined CAS latency. + * + * If a CAS latency is not found, 0 is returned. + * + * Do this by finding in the standard speed bin table the longest + * tCKmin that doesn't exceed the value of mclk_ps (tCK). + * + * An assumption made is that the SDRAM device allows the + * CL to be programmed for a value that is lower than those + * advertised by the SPD. This is not always the case, + * as those modes not defined in the SPD are optional. + * + * CAS latency de-rating based upon values JEDEC Standard No. 79-2C + * Table 40, "DDR2 SDRAM stanadard speed bins and tCK, tRCD, tRP, tRAS, + * and tRC for corresponding bin" + * + * ordinal 2, ddr2_speed_bins[1] contains tCK for CL=3 + * Not certain if any good value exists for CL=2 + */ + /* CL2 CL3 CL4 CL5 CL6 CL7*/ +unsigned short ddr2_speed_bins[] = { 0, 5000, 3750, 3000, 2500, 1875 }; + +static unsigned int +compute_derated_DDR2_CAS_latency(unsigned int mclk_ps) +{ + const unsigned int num_speed_bins = ARRAY_SIZE(ddr2_speed_bins); + unsigned int lowest_tCKmin_found = 0; + unsigned int lowest_tCKmin_CL = 0; + unsigned int i; + + debug("mclk_ps = %u\n", mclk_ps); + + for (i = 0; i < num_speed_bins; i++) { + unsigned int x = ddr2_speed_bins[i]; + debug("i=%u, x = %u, lowest_tCKmin_found = %u\n", + i, x, lowest_tCKmin_found); + if (x && x <= mclk_ps && x >= lowest_tCKmin_found ) { + lowest_tCKmin_found = x; + lowest_tCKmin_CL = i + 2; + } + } + + debug("lowest_tCKmin_CL = %u\n", lowest_tCKmin_CL); + + return lowest_tCKmin_CL; +} + +/* + * ddr2_compute_dimm_parameters for DDR2 SPD + * + * Compute DIMM parameters based upon the SPD information in spd. + * Writes the results to the struct dimm_params structure pointed by pdimm. + * + * FIXME: use #define for the retvals + */ +unsigned int ddr2_compute_dimm_parameters(struct fsl_ddr_controller *c, + const struct ddr2_spd_eeprom *spd, + struct dimm_params *pdimm) +{ + int ret; + + ret = ddr2_spd_check(spd); + if (ret) { + printf("DIMM: failed checksum\n"); + return 2; + } + + /* + * The part name in ASCII in the SPD EEPROM is not null terminated. + * Guarantee null termination here by presetting all bytes to 0 + * and copying the part name in ASCII from the SPD onto it + */ + memset(pdimm->mpart, 0, sizeof(pdimm->mpart)); + memcpy(pdimm->mpart, spd->mpart, sizeof(pdimm->mpart) - 1); + + /* DIMM organization parameters */ + pdimm->n_ranks = (spd->mod_ranks & 0x7) + 1; + pdimm->rank_density = compute_ranksize(spd->mem_type, spd->rank_dens); + pdimm->capacity = pdimm->n_ranks * pdimm->rank_density; + pdimm->data_width = spd->dataw; + pdimm->primary_sdram_width = spd->primw; + pdimm->ec_sdram_width = spd->ecw; + + /* These are all the types defined by the JEDEC DDR2 SPD 1.3 spec */ + switch (spd->dimm_type) { + case DDR2_SPD_DIMMTYPE_RDIMM: + case DDR2_SPD_DIMMTYPE_72B_SO_RDIMM: + case DDR2_SPD_DIMMTYPE_MINI_RDIMM: + /* Registered/buffered DIMMs */ + pdimm->registered_dimm = 1; + break; + + case DDR2_SPD_DIMMTYPE_UDIMM: + case DDR2_SPD_DIMMTYPE_SO_DIMM: + case DDR2_SPD_DIMMTYPE_MICRO_DIMM: + case DDR2_SPD_DIMMTYPE_MINI_UDIMM: + /* Unbuffered DIMMs */ + pdimm->registered_dimm = 0; + break; + + case DDR2_SPD_DIMMTYPE_72B_SO_CDIMM: + default: + printf("unknown dimm_type 0x%02X\n", spd->dimm_type); + return 1; + } + + /* SDRAM device parameters */ + pdimm->n_row_addr = spd->nrow_addr; + pdimm->n_col_addr = spd->ncol_addr; + pdimm->n_banks_per_sdram_device = spd->nbanks; + pdimm->edc_config = spd->config; + pdimm->burst_lengths_bitmask = spd->burstl; + + /* + * Calculate the Maximum Data Rate based on the Minimum Cycle time. + * The SPD clk_cycle field (tCKmin) is measured in tenths of + * nanoseconds and represented as BCD. + */ + pdimm->tckmin_x_ps + = convert_bcd_tenths_to_cycle_time_ps(spd->clk_cycle); + pdimm->tckmin_x_minus_1_ps + = convert_bcd_tenths_to_cycle_time_ps(spd->clk_cycle2); + pdimm->tckmin_x_minus_2_ps + = convert_bcd_tenths_to_cycle_time_ps(spd->clk_cycle3); + + pdimm->tckmax_ps = convert_bcd_tenths_to_cycle_time_ps(spd->tckmax); + + /* + * Compute CAS latencies defined by SPD + * The SPD caslat_x should have at least 1 and at most 3 bits set. + * + * If cas_lat after masking is 0, the __ilog2 function returns + * 255 into the variable. This behavior is abused once. + */ + pdimm->caslat_x = ilog2(spd->cas_lat); + pdimm->caslat_x_minus_1 = ilog2(spd->cas_lat + & ~(1 << pdimm->caslat_x)); + pdimm->caslat_x_minus_2 = ilog2(spd->cas_lat + & ~(1 << pdimm->caslat_x) + & ~(1 << pdimm->caslat_x_minus_1)); + + /* Compute CAS latencies below that defined by SPD */ + pdimm->caslat_lowest_derated = compute_derated_DDR2_CAS_latency( + get_memory_clk_period_ps(c)); + + /* Compute timing parameters */ + pdimm->trcd_ps = spd->trcd * 250; + pdimm->trp_ps = spd->trp * 250; + pdimm->tras_ps = spd->tras * 1000; + + pdimm->twr_ps = spd->twr * 250; + pdimm->twtr_ps = spd->twtr * 250; + pdimm->trfc_ps = compute_trfc_ps_from_spd(spd->trctrfc_ext, spd->trfc); + + pdimm->trrd_ps = spd->trrd * 250; + pdimm->trc_ps = compute_trc_ps_from_spd(spd->trctrfc_ext, spd->trc); + + pdimm->refresh_rate_ps = determine_refresh_rate_ps(spd->refresh); + + pdimm->tis_ps = convert_bcd_hundredths_to_cycle_time_ps(spd->ca_setup); + pdimm->tih_ps = convert_bcd_hundredths_to_cycle_time_ps(spd->ca_hold); + pdimm->tds_ps + = convert_bcd_hundredths_to_cycle_time_ps(spd->data_setup); + pdimm->tdh_ps + = convert_bcd_hundredths_to_cycle_time_ps(spd->data_hold); + + pdimm->trtp_ps = spd->trtp * 250; + pdimm->tdqsq_max_ps = spd->tdqsq * 10; + pdimm->tqhs_ps = spd->tqhs * 10; + + return 0; +} diff --git a/drivers/ddr/fsl/ddr3_dimm_params.c b/drivers/ddr/fsl/ddr3_dimm_params.c new file mode 100644 index 0000000000..1665e792c3 --- /dev/null +++ b/drivers/ddr/fsl/ddr3_dimm_params.c @@ -0,0 +1,325 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright 2008-2012 Freescale Semiconductor, Inc. + * Dave Liu <daveliu@freescale.com> + * + * calculate the organization and timing parameter + * from ddr3 spd, please refer to the spec + * JEDEC standard No.21-C 4_01_02_11R18.pdf + */ + +#include <common.h> +#include <soc/fsl/fsl_ddr_sdram.h> +#include "fsl_ddr.h" + +/* + * Calculate the Density of each Physical Rank. + * Returned size is in bytes. + * + * each rank size = + * sdram capacity(bit) / 8 * primary bus width / sdram width + * + * where: sdram capacity = spd byte4[3:0] + * primary bus width = spd byte8[2:0] + * sdram width = spd byte7[2:0] + * + * SPD byte4 - sdram density and banks + * bit[3:0] size(bit) size(byte) + * 0000 256Mb 32MB + * 0001 512Mb 64MB + * 0010 1Gb 128MB + * 0011 2Gb 256MB + * 0100 4Gb 512MB + * 0101 8Gb 1GB + * 0110 16Gb 2GB + * + * SPD byte8 - module memory bus width + * bit[2:0] primary bus width + * 000 8bits + * 001 16bits + * 010 32bits + * 011 64bits + * + * SPD byte7 - module organiztion + * bit[2:0] sdram device width + * 000 4bits + * 001 8bits + * 010 16bits + * 011 32bits + * + */ +static unsigned long long +compute_ranksize(const struct ddr3_spd_eeprom *spd) +{ + unsigned long long bsize; + + int nbit_sdram_cap_bsize = 0; + int nbit_primary_bus_width = 0; + int nbit_sdram_width = 0; + + if ((spd->density_banks & 0xf) < 7) + nbit_sdram_cap_bsize = (spd->density_banks & 0xf) + 28; + if ((spd->bus_width & 0x7) < 4) + nbit_primary_bus_width = (spd->bus_width & 0x7) + 3; + if ((spd->organization & 0x7) < 4) + nbit_sdram_width = (spd->organization & 0x7) + 2; + + bsize = 1ULL << (nbit_sdram_cap_bsize - 3 + + nbit_primary_bus_width - nbit_sdram_width); + + debug("DDR: DDR III rank density = 0x%16llx\n", bsize); + + return bsize; +} + +/* + * ddr3_compute_dimm_parameters for DDR3 SPD + * + * Compute DIMM parameters based upon the SPD information in spd. + * Writes the results to the struct dimm_params structure pointed by pdimm. + * + */ +unsigned int ddr3_compute_dimm_parameters(struct fsl_ddr_controller *c, + const struct ddr3_spd_eeprom *spd, + struct dimm_params *pdimm) +{ + int ret; + unsigned int mtb_ps; + int ftb_10th_ps; + int i; + + ret = ddr3_spd_check(spd); + if (ret) { + printf("DIMM: failed checksum\n"); + return 2; + } + + /* + * The part name in ASCII in the SPD EEPROM is not null terminated. + * Guarantee null termination here by presetting all bytes to 0 + * and copying the part name in ASCII from the SPD onto it + */ + memset(pdimm->mpart, 0, sizeof(pdimm->mpart)); + if ((spd->info_size_crc & 0xF) > 1) + memcpy(pdimm->mpart, spd->mpart, sizeof(pdimm->mpart) - 1); + + /* DIMM organization parameters */ + pdimm->n_ranks = ((spd->organization >> 3) & 0x7) + 1; + pdimm->rank_density = compute_ranksize(spd); + pdimm->capacity = pdimm->n_ranks * pdimm->rank_density; + pdimm->primary_sdram_width = 1 << (3 + (spd->bus_width & 0x7)); + if ((spd->bus_width >> 3) & 0x3) + pdimm->ec_sdram_width = 8; + else + pdimm->ec_sdram_width = 0; + pdimm->data_width = pdimm->primary_sdram_width + + pdimm->ec_sdram_width; + pdimm->device_width = 1 << ((spd->organization & 0x7) + 2); + + /* These are the types defined by the JEDEC DDR3 SPD spec */ + pdimm->mirrored_dimm = 0; + pdimm->registered_dimm = 0; + switch (spd->module_type & DDR3_SPD_MODULETYPE_MASK) { + case DDR3_SPD_MODULETYPE_RDIMM: + case DDR3_SPD_MODULETYPE_MINI_RDIMM: + case DDR3_SPD_MODULETYPE_72B_SO_RDIMM: + /* Registered/buffered DIMMs */ + pdimm->registered_dimm = 1; + for (i = 0; i < 16; i += 2) { + u8 rcw = spd->mod_section.registered.rcw[i/2]; + pdimm->rcw[i] = (rcw >> 0) & 0x0F; + pdimm->rcw[i+1] = (rcw >> 4) & 0x0F; + } + break; + + case DDR3_SPD_MODULETYPE_UDIMM: + case DDR3_SPD_MODULETYPE_SO_DIMM: + case DDR3_SPD_MODULETYPE_MICRO_DIMM: + case DDR3_SPD_MODULETYPE_MINI_UDIMM: + case DDR3_SPD_MODULETYPE_MINI_CDIMM: + case DDR3_SPD_MODULETYPE_72B_SO_UDIMM: + case DDR3_SPD_MODULETYPE_72B_SO_CDIMM: + case DDR3_SPD_MODULETYPE_LRDIMM: + case DDR3_SPD_MODULETYPE_16B_SO_DIMM: + case DDR3_SPD_MODULETYPE_32B_SO_DIMM: + /* Unbuffered DIMMs */ + if (spd->mod_section.unbuffered.addr_mapping & 0x1) + pdimm->mirrored_dimm = 1; + break; + + default: + printf("unknown module_type 0x%02X\n", spd->module_type); + return 1; + } + + /* SDRAM device parameters */ + pdimm->n_row_addr = ((spd->addressing >> 3) & 0x7) + 12; + pdimm->n_col_addr = (spd->addressing & 0x7) + 9; + pdimm->n_banks_per_sdram_device = 8 << ((spd->density_banks >> 4) & 0x7); + + /* + * The SPD spec has not the ECC bit, + * We consider the DIMM as ECC capability + * when the extension bus exist + */ + if (pdimm->ec_sdram_width) + pdimm->edc_config = 0x02; + else + pdimm->edc_config = 0x00; + + /* + * The SPD spec has not the burst length byte + * but DDR3 spec has nature BL8 and BC4, + * BL8 -bit3, BC4 -bit2 + */ + pdimm->burst_lengths_bitmask = 0x0c; + + /* MTB - medium timebase + * The unit in the SPD spec is ns, + * We convert it to ps. + * eg: MTB = 0.125ns (125ps) + */ + mtb_ps = (spd->mtb_dividend * 1000) /spd->mtb_divisor; + pdimm->mtb_ps = mtb_ps; + + /* + * FTB - fine timebase + * use 1/10th of ps as our unit to avoid floating point + * eg, 10 for 1ps, 25 for 2.5ps, 50 for 5ps + */ + ftb_10th_ps = + ((spd->ftb_div & 0xf0) >> 4) * 10 / (spd->ftb_div & 0x0f); + pdimm->ftb_10th_ps = ftb_10th_ps; + /* + * sdram minimum cycle time + * we assume the MTB is 0.125ns + * eg: + * tck_min=15 MTB (1.875ns) ->DDR3-1066 + * =12 MTB (1.5ns) ->DDR3-1333 + * =10 MTB (1.25ns) ->DDR3-1600 + */ + pdimm->tckmin_x_ps = spd->tck_min * mtb_ps + + (spd->fine_tck_min * ftb_10th_ps) / 10; + + /* + * CAS latency supported + * bit4 - CL4 + * bit5 - CL5 + * bit18 - CL18 + */ + pdimm->caslat_x = ((spd->caslat_msb << 8) | spd->caslat_lsb) << 4; + + /* + * min CAS latency time + * eg: taa_min = + * DDR3-800D 100 MTB (12.5ns) + * DDR3-1066F 105 MTB (13.125ns) + * DDR3-1333H 108 MTB (13.5ns) + * DDR3-1600H 90 MTB (11.25ns) + */ + pdimm->taa_ps = spd->taa_min * mtb_ps + + (spd->fine_taa_min * ftb_10th_ps) / 10; + + /* + * min write recovery time + * eg: + * twr_min = 120 MTB (15ns) -> all speed grades. + */ + pdimm->twr_ps = spd->twr_min * mtb_ps; + + /* + * min RAS to CAS delay time + * eg: trcd_min = + * DDR3-800 100 MTB (12.5ns) + * DDR3-1066F 105 MTB (13.125ns) + * DDR3-1333H 108 MTB (13.5ns) + * DDR3-1600H 90 MTB (11.25) + */ + pdimm->trcd_ps = spd->trcd_min * mtb_ps + + (spd->fine_trcd_min * ftb_10th_ps) / 10; + + /* + * min row active to row active delay time + * eg: trrd_min = + * DDR3-800(1KB page) 80 MTB (10ns) + * DDR3-1333(1KB page) 48 MTB (6ns) + */ + pdimm->trrd_ps = spd->trrd_min * mtb_ps; + + /* + * min row precharge delay time + * eg: trp_min = + * DDR3-800D 100 MTB (12.5ns) + * DDR3-1066F 105 MTB (13.125ns) + * DDR3-1333H 108 MTB (13.5ns) + * DDR3-1600H 90 MTB (11.25ns) + */ + pdimm->trp_ps = spd->trp_min * mtb_ps + + (spd->fine_trp_min * ftb_10th_ps) / 10; + + /* min active to precharge delay time + * eg: tRAS_min = + * DDR3-800D 300 MTB (37.5ns) + * DDR3-1066F 300 MTB (37.5ns) + * DDR3-1333H 288 MTB (36ns) + * DDR3-1600H 280 MTB (35ns) + */ + pdimm->tras_ps = (((spd->tras_trc_ext & 0xf) << 8) | spd->tras_min_lsb) + * mtb_ps; + /* + * min active to actice/refresh delay time + * eg: tRC_min = + * DDR3-800D 400 MTB (50ns) + * DDR3-1066F 405 MTB (50.625ns) + * DDR3-1333H 396 MTB (49.5ns) + * DDR3-1600H 370 MTB (46.25ns) + */ + pdimm->trc_ps = (((spd->tras_trc_ext & 0xf0) << 4) | spd->trc_min_lsb) + * mtb_ps + (spd->fine_trc_min * ftb_10th_ps) / 10; + /* + * min refresh recovery delay time + * eg: tRFC_min = + * 512Mb 720 MTB (90ns) + * 1Gb 880 MTB (110ns) + * 2Gb 1280 MTB (160ns) + */ + pdimm->trfc_ps = ((spd->trfc_min_msb << 8) | spd->trfc_min_lsb) + * mtb_ps; + /* + * min internal write to read command delay time + * eg: twtr_min = 40 MTB (7.5ns) - all speed bins. + * tWRT is at least 4 mclk independent of operating freq. + */ + pdimm->twtr_ps = spd->twtr_min * mtb_ps; + + /* + * min internal read to precharge command delay time + * eg: trtp_min = 40 MTB (7.5ns) - all speed bins. + * tRTP is at least 4 mclk independent of operating freq. + */ + pdimm->trtp_ps = spd->trtp_min * mtb_ps; + + /* + * Average periodic refresh interval + * tREFI = 7.8 us at normal temperature range + * = 3.9 us at ext temperature range + */ + pdimm->refresh_rate_ps = 7800000; + if ((spd->therm_ref_opt & 0x1) && !(spd->therm_ref_opt & 0x2)) { + pdimm->refresh_rate_ps = 3900000; + pdimm->extended_op_srt = 1; + } + + /* + * min four active window delay time + * eg: tfaw_min = + * DDR3-800(1KB page) 320 MTB (40ns) + * DDR3-1066(1KB page) 300 MTB (37.5ns) + * DDR3-1333(1KB page) 240 MTB (30ns) + * DDR3-1600(1KB page) 240 MTB (30ns) + */ + pdimm->tfaw_ps = (((spd->tfaw_msb & 0xf) << 8) | spd->tfaw_min) + * mtb_ps; + + return 0; +} diff --git a/drivers/ddr/fsl/ddr4_dimm_params.c b/drivers/ddr/fsl/ddr4_dimm_params.c new file mode 100644 index 0000000000..f39b6e2853 --- /dev/null +++ b/drivers/ddr/fsl/ddr4_dimm_params.c @@ -0,0 +1,352 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2014-2016 Freescale Semiconductor, Inc. + * Copyright 2017-2018 NXP Semiconductor + * + * calculate the organization and timing parameter + * from ddr3 spd, please refer to the spec + * JEDEC standard No.21-C 4_01_02_12R23A.pdf + * + * + */ + +#include <common.h> +#include <soc/fsl/fsl_ddr_sdram.h> +#include "fsl_ddr.h" + +/* + * Calculate the Density of each Physical Rank. + * Returned size is in bytes. + * + * Total DIMM size = + * sdram capacity(bit) / 8 * primary bus width / sdram width + * * Logical Ranks per DIMM + * + * where: sdram capacity = spd byte4[3:0] + * primary bus width = spd byte13[2:0] + * sdram width = spd byte12[2:0] + * Logical Ranks per DIMM = spd byte12[5:3] for SDP, DDP, QDP + * spd byte12{5:3] * spd byte6[6:4] for 3DS + * + * To simplify each rank size = total DIMM size / Number of Package Ranks + * where Number of Package Ranks = spd byte12[5:3] + * + * SPD byte4 - sdram density and banks + * bit[3:0] size(bit) size(byte) + * 0000 256Mb 32MB + * 0001 512Mb 64MB + * 0010 1Gb 128MB + * 0011 2Gb 256MB + * 0100 4Gb 512MB + * 0101 8Gb 1GB + * 0110 16Gb 2GB + * 0111 32Gb 4GB + * + * SPD byte13 - module memory bus width + * bit[2:0] primary bus width + * 000 8bits + * 001 16bits + * 010 32bits + * 011 64bits + * + * SPD byte12 - module organization + * bit[2:0] sdram device width + * 000 4bits + * 001 8bits + * 010 16bits + * 011 32bits + * + * SPD byte12 - module organization + * bit[5:3] number of package ranks per DIMM + * 000 1 + * 001 2 + * 010 3 + * 011 4 + * + * SPD byte6 - SDRAM package type + * bit[6:4] Die count + * 000 1 + * 001 2 + * 010 3 + * 011 4 + * 100 5 + * 101 6 + * 110 7 + * 111 8 + * + * SPD byte6 - SRAM package type + * bit[1:0] Signal loading + * 00 Not specified + * 01 Multi load stack + * 10 Sigle load stack (3DS) + * 11 Reserved + */ +static unsigned long long +compute_ranksize(const struct ddr4_spd_eeprom *spd) +{ + unsigned long long bsize; + + int nbit_sdram_cap_bsize = 0; + int nbit_primary_bus_width = 0; + int nbit_sdram_width = 0; + int die_count = 0; + bool package_3ds; + + if ((spd->density_banks & 0xf) <= 7) + nbit_sdram_cap_bsize = (spd->density_banks & 0xf) + 28; + if ((spd->bus_width & 0x7) < 4) + nbit_primary_bus_width = (spd->bus_width & 0x7) + 3; + if ((spd->organization & 0x7) < 4) + nbit_sdram_width = (spd->organization & 0x7) + 2; + package_3ds = (spd->package_type & 0x3) == 0x2; + if ((spd->package_type & 0x80) && !package_3ds) { /* other than 3DS */ + printf("Warning: not supported SDRAM package type\n"); + return 0; + } + if (package_3ds) + die_count = (spd->package_type >> 4) & 0x7; + + bsize = 1ULL << (nbit_sdram_cap_bsize - 3 + + nbit_primary_bus_width - nbit_sdram_width + + die_count); + + debug("DDR: DDR rank density = 0x%16llx\n", bsize); + + return bsize; +} + +#define spd_to_ps(mtb, ftb) \ + (mtb * pdimm->mtb_ps + (ftb * pdimm->ftb_10th_ps) / 10) +/* + * ddr4_compute_dimm_parameters for DDR4 SPD + * + * Compute DIMM parameters based upon the SPD information in spd. + * Writes the results to the struct dimm_params structure pointed by pdimm. + * + */ +unsigned int ddr4_compute_dimm_parameters(struct fsl_ddr_controller *c, + const struct ddr4_spd_eeprom *spd, + struct dimm_params *pdimm) +{ + int ret; + int i; + const u8 udimm_rc_e_dq[18] = { + 0x0c, 0x2c, 0x15, 0x35, 0x15, 0x35, 0x0b, 0x2c, 0x15, + 0x35, 0x0b, 0x35, 0x0b, 0x2c, 0x0b, 0x35, 0x15, 0x36 + }; + int spd_error = 0; + u8 *ptr; + u8 val; + + ret = ddr4_spd_check(spd); + if (ret) { + printf("DIMM: failed checksum\n"); + return 2; + } + + /* + * The part name in ASCII in the SPD EEPROM is not null terminated. + * Guarantee null termination here by presetting all bytes to 0 + * and copying the part name in ASCII from the SPD onto it + */ + memset(pdimm->mpart, 0, sizeof(pdimm->mpart)); + if ((spd->info_size_crc & 0xF) > 2) + memcpy(pdimm->mpart, spd->mpart, sizeof(pdimm->mpart) - 1); + + /* DIMM organization parameters */ + pdimm->n_ranks = ((spd->organization >> 3) & 0x7) + 1; + pdimm->rank_density = compute_ranksize(spd); + pdimm->capacity = pdimm->n_ranks * pdimm->rank_density; + pdimm->die_density = spd->density_banks & 0xf; + pdimm->primary_sdram_width = 1 << (3 + (spd->bus_width & 0x7)); + if ((spd->bus_width >> 3) & 0x3) + pdimm->ec_sdram_width = 8; + else + pdimm->ec_sdram_width = 0; + pdimm->data_width = pdimm->primary_sdram_width + + pdimm->ec_sdram_width; + pdimm->device_width = 1 << ((spd->organization & 0x7) + 2); + pdimm->package_3ds = (spd->package_type & 0x3) == 0x2 ? + (spd->package_type >> 4) & 0x7 : 0; + + /* These are the types defined by the JEDEC SPD spec */ + pdimm->mirrored_dimm = 0; + pdimm->registered_dimm = 0; + switch (spd->module_type & DDR4_SPD_MODULETYPE_MASK) { + case DDR4_SPD_MODULETYPE_RDIMM: + /* Registered/buffered DIMMs */ + pdimm->registered_dimm = 1; + if (spd->mod_section.registered.reg_map & 0x1) + pdimm->mirrored_dimm = 1; + val = spd->mod_section.registered.ca_stren; + pdimm->rcw[3] = val >> 4; + pdimm->rcw[4] = ((val & 0x3) << 2) | ((val & 0xc) >> 2); + val = spd->mod_section.registered.clk_stren; + pdimm->rcw[5] = ((val & 0x3) << 2) | ((val & 0xc) >> 2); + /* Not all in SPD. For convience only. Boards may overwrite. */ + pdimm->rcw[6] = 0xf; + /* + * A17 only used for 16Gb and above devices. + * C[2:0] only used for 3DS. + */ + pdimm->rcw[8] = pdimm->die_density >= 0x6 ? 0x0 : 0x8 | + (pdimm->package_3ds > 0x3 ? 0x0 : + (pdimm->package_3ds > 0x1 ? 0x1 : + (pdimm->package_3ds > 0 ? 0x2 : 0x3))); + if (pdimm->package_3ds || pdimm->n_ranks != 4) + pdimm->rcw[13] = 0xc; + else + pdimm->rcw[13] = 0xd; /* Fix encoded by board */ + + break; + + case DDR4_SPD_MODULETYPE_UDIMM: + case DDR4_SPD_MODULETYPE_SO_DIMM: + /* Unbuffered DIMMs */ + if (spd->mod_section.unbuffered.addr_mapping & 0x1) + pdimm->mirrored_dimm = 1; + if ((spd->mod_section.unbuffered.mod_height & 0xe0) == 0 && + (spd->mod_section.unbuffered.ref_raw_card == 0x04)) { + /* Fix SPD error found on DIMMs with raw card E0 */ + for (i = 0; i < 18; i++) { + if (spd->mapping[i] == udimm_rc_e_dq[i]) + continue; + spd_error = 1; + debug("SPD byte %d: 0x%x, should be 0x%x\n", + 60 + i, spd->mapping[i], + udimm_rc_e_dq[i]); + ptr = (u8 *)&spd->mapping[i]; + *ptr = udimm_rc_e_dq[i]; + } + if (spd_error) + printf("SPD DQ mapping error fixed\n"); + } + break; + + default: + printf("unknown module_type 0x%02X\n", spd->module_type); + return 1; + } + + /* SDRAM device parameters */ + pdimm->n_row_addr = ((spd->addressing >> 3) & 0x7) + 12; + pdimm->n_col_addr = (spd->addressing & 0x7) + 9; + pdimm->bank_addr_bits = (spd->density_banks >> 4) & 0x3; + pdimm->bank_group_bits = (spd->density_banks >> 6) & 0x3; + + /* + * The SPD spec has not the ECC bit, + * We consider the DIMM as ECC capability + * when the extension bus exist + */ + if (pdimm->ec_sdram_width) + pdimm->edc_config = 0x02; + else + pdimm->edc_config = 0x00; + + /* + * The SPD spec has not the burst length byte + * but DDR4 spec has nature BL8 and BC4, + * BL8 -bit3, BC4 -bit2 + */ + pdimm->burst_lengths_bitmask = 0x0c; + + /* MTB - medium timebase + * The MTB in the SPD spec is 125ps, + * + * FTB - fine timebase + * use 1/10th of ps as our unit to avoid floating point + * eg, 10 for 1ps, 25 for 2.5ps, 50 for 5ps + */ + if ((spd->timebases & 0xf) == 0x0) { + pdimm->mtb_ps = 125; + pdimm->ftb_10th_ps = 10; + + } else { + printf("Unknown Timebases\n"); + } + + /* sdram minimum cycle time */ + pdimm->tckmin_x_ps = spd_to_ps(spd->tck_min, spd->fine_tck_min); + + /* sdram max cycle time */ + pdimm->tckmax_ps = spd_to_ps(spd->tck_max, spd->fine_tck_max); + + /* + * CAS latency supported + * bit0 - CL7 + * bit4 - CL11 + * bit8 - CL15 + * bit12- CL19 + * bit16- CL23 + */ + pdimm->caslat_x = (spd->caslat_b1 << 7) | + (spd->caslat_b2 << 15) | + (spd->caslat_b3 << 23); + + BUG_ON(spd->caslat_b4 != 0); + + /* + * min CAS latency time + */ + pdimm->taa_ps = spd_to_ps(spd->taa_min, spd->fine_taa_min); + + /* + * min RAS to CAS delay time + */ + pdimm->trcd_ps = spd_to_ps(spd->trcd_min, spd->fine_trcd_min); + + /* + * Min Row Precharge Delay Time + */ + pdimm->trp_ps = spd_to_ps(spd->trp_min, spd->fine_trp_min); + + /* min active to precharge delay time */ + pdimm->tras_ps = (((spd->tras_trc_ext & 0xf) << 8) + + spd->tras_min_lsb) * pdimm->mtb_ps; + + /* min active to actice/refresh delay time */ + pdimm->trc_ps = spd_to_ps((((spd->tras_trc_ext & 0xf0) << 4) + + spd->trc_min_lsb), spd->fine_trc_min); + /* Min Refresh Recovery Delay Time */ + pdimm->trfc1_ps = ((spd->trfc1_min_msb << 8) | (spd->trfc1_min_lsb)) * + pdimm->mtb_ps; + pdimm->trfc2_ps = ((spd->trfc2_min_msb << 8) | (spd->trfc2_min_lsb)) * + pdimm->mtb_ps; + pdimm->trfc4_ps = ((spd->trfc4_min_msb << 8) | (spd->trfc4_min_lsb)) * + pdimm->mtb_ps; + /* min four active window delay time */ + pdimm->tfaw_ps = (((spd->tfaw_msb & 0xf) << 8) | spd->tfaw_min) * + pdimm->mtb_ps; + + /* min row active to row active delay time, different bank group */ + pdimm->trrds_ps = spd_to_ps(spd->trrds_min, spd->fine_trrds_min); + /* min row active to row active delay time, same bank group */ + pdimm->trrdl_ps = spd_to_ps(spd->trrdl_min, spd->fine_trrdl_min); + /* min CAS to CAS Delay Time (tCCD_Lmin), same bank group */ + pdimm->tccdl_ps = spd_to_ps(spd->tccdl_min, spd->fine_tccdl_min); + + if (pdimm->package_3ds) { + if (pdimm->die_density <= 0x4) { + pdimm->trfc_slr_ps = 260000; + } else if (pdimm->die_density <= 0x5) { + pdimm->trfc_slr_ps = 350000; + } else { + printf("WARN: Unsupported logical rank density 0x%x\n", + pdimm->die_density); + } + } + + /* + * Average periodic refresh interval + * tREFI = 7.8 us at normal temperature range + */ + pdimm->refresh_rate_ps = 7800000; + + for (i = 0; i < 18; i++) + pdimm->dq_mapping[i] = spd->mapping[i]; + + pdimm->dq_mapping_ors = ((spd->mapping[0] >> 6) & 0x3) == 0 ? 1 : 0; + + return 0; +} diff --git a/drivers/ddr/fsl/fsl_ddr.h b/drivers/ddr/fsl/fsl_ddr.h new file mode 100644 index 0000000000..ee6069d812 --- /dev/null +++ b/drivers/ddr/fsl/fsl_ddr.h @@ -0,0 +1,234 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright 2008-2016 Freescale Semiconductor, Inc. + * Copyright 2017-2018 NXP Semiconductor + */ + +#ifndef FSL_DDR_H +#define FSL_DDR_H + +#include <ddr_spd.h> +#include <soc/fsl/fsl_immap.h> + +#define DDR_BL4 4 /* burst length 4 */ +#define DDR_BC4 DDR_BL4 /* burst chop for ddr3 */ +#define DDR_OTF 6 /* on-the-fly BC4 and BL8 */ +#define DDR_BL8 8 /* burst length 8 */ + +#define DDR3_RTT_OFF 0 +#define DDR3_RTT_60_OHM 1 /* RTT_Nom = RZQ/4 */ +#define DDR3_RTT_120_OHM 2 /* RTT_Nom = RZQ/2 */ +#define DDR3_RTT_40_OHM 3 /* RTT_Nom = RZQ/6 */ +#define DDR3_RTT_20_OHM 4 /* RTT_Nom = RZQ/12 */ +#define DDR3_RTT_30_OHM 5 /* RTT_Nom = RZQ/8 */ + +#define DDR4_RTT_OFF 0 +#define DDR4_RTT_60_OHM 1 /* RZQ/4 */ +#define DDR4_RTT_120_OHM 2 /* RZQ/2 */ +#define DDR4_RTT_40_OHM 3 /* RZQ/6 */ +#define DDR4_RTT_240_OHM 4 /* RZQ/1 */ +#define DDR4_RTT_48_OHM 5 /* RZQ/5 */ +#define DDR4_RTT_80_OHM 6 /* RZQ/3 */ +#define DDR4_RTT_34_OHM 7 /* RZQ/7 */ + +#define DDR2_RTT_OFF 0 +#define DDR2_RTT_75_OHM 1 +#define DDR2_RTT_150_OHM 2 +#define DDR2_RTT_50_OHM 3 + +#define FSL_DDR_MIN_TCKE_PULSE_WIDTH_DDR1 1 +#define FSL_DDR_MIN_TCKE_PULSE_WIDTH_DDR2 3 + +#define FSL_DDR_ODT_NEVER 0x0 +#define FSL_DDR_ODT_CS 0x1 +#define FSL_DDR_ODT_ALL_OTHER_CS 0x2 +#define FSL_DDR_ODT_OTHER_DIMM 0x3 +#define FSL_DDR_ODT_ALL 0x4 +#define FSL_DDR_ODT_SAME_DIMM 0x5 +#define FSL_DDR_ODT_CS_AND_OTHER_DIMM 0x6 +#define FSL_DDR_ODT_OTHER_CS_ONSAMEDIMM 0x7 + +/* define bank(chip select) interleaving mode */ +#define FSL_DDR_CS0_CS1 0x40 +#define FSL_DDR_CS2_CS3 0x20 +#define FSL_DDR_CS0_CS1_AND_CS2_CS3 (FSL_DDR_CS0_CS1 | FSL_DDR_CS2_CS3) +#define FSL_DDR_CS0_CS1_CS2_CS3 (FSL_DDR_CS0_CS1_AND_CS2_CS3 | 0x04) + +/* define memory controller interleaving mode */ +#define FSL_DDR_CACHE_LINE_INTERLEAVING 0x0 +#define FSL_DDR_PAGE_INTERLEAVING 0x1 +#define FSL_DDR_BANK_INTERLEAVING 0x2 +#define FSL_DDR_SUPERBANK_INTERLEAVING 0x3 +#define FSL_DDR_256B_INTERLEAVING 0x8 +#define FSL_DDR_3WAY_1KB_INTERLEAVING 0xA +#define FSL_DDR_3WAY_4KB_INTERLEAVING 0xC +#define FSL_DDR_3WAY_8KB_INTERLEAVING 0xD +/* placeholder for 4-way interleaving */ +#define FSL_DDR_4WAY_1KB_INTERLEAVING 0x1A +#define FSL_DDR_4WAY_4KB_INTERLEAVING 0x1C +#define FSL_DDR_4WAY_8KB_INTERLEAVING 0x1D + +#define SDRAM_CS_CONFIG_EN 0x80000000 + +/* DDR_SDRAM_CFG - DDR SDRAM Control Configuration + */ +#define SDRAM_CFG_MEM_EN 0x80000000 +#define SDRAM_CFG_SREN 0x40000000 +#define SDRAM_CFG_ECC_EN 0x20000000 +#define SDRAM_CFG_RD_EN 0x10000000 +#define SDRAM_CFG_SDRAM_TYPE_DDR1 0x02000000 +#define SDRAM_CFG_SDRAM_TYPE_DDR2 0x03000000 +#define SDRAM_CFG_SDRAM_TYPE_MASK 0x07000000 +#define SDRAM_CFG_SDRAM_TYPE_SHIFT 24 +#define SDRAM_CFG_DYN_PWR 0x00200000 +#define SDRAM_CFG_DBW_MASK 0x00180000 +#define SDRAM_CFG_DBW_SHIFT 19 +#define SDRAM_CFG_32_BE 0x00080000 +#define SDRAM_CFG_16_BE 0x00100000 +#define SDRAM_CFG_8_BE 0x00040000 +#define SDRAM_CFG_NCAP 0x00020000 +#define SDRAM_CFG_2T_EN 0x00008000 +#define SDRAM_CFG_BI 0x00000001 + +#define SDRAM_CFG2_FRC_SR 0x80000000 +#define SDRAM_CFG2_D_INIT 0x00000010 +#define SDRAM_CFG2_AP_EN 0x00000020 +#define SDRAM_CFG2_ODT_CFG_MASK 0x00600000 +#define SDRAM_CFG2_ODT_NEVER 0 +#define SDRAM_CFG2_ODT_ONLY_WRITE 1 +#define SDRAM_CFG2_ODT_ONLY_READ 2 +#define SDRAM_CFG2_ODT_ALWAYS 3 + +#define SDRAM_INTERVAL_BSTOPRE 0x3FFF +#define TIMING_CFG_2_CPO_MASK 0x0F800000 + +#define RD_TO_PRE_MASK 0xf +#define RD_TO_PRE_SHIFT 13 +#define WR_DATA_DELAY_MASK 0xf +#define WR_DATA_DELAY_SHIFT 9 + +/* DDR_EOR register */ +#define DDR_EOR_RD_REOD_DIS 0x07000000 +#define DDR_EOR_WD_REOD_DIS 0x00100000 + +/* DDR_MD_CNTL */ +#define MD_CNTL_MD_EN 0x80000000 +#define MD_CNTL_CS_SEL_CS0 0x00000000 +#define MD_CNTL_CS_SEL_CS1 0x10000000 +#define MD_CNTL_CS_SEL_CS2 0x20000000 +#define MD_CNTL_CS_SEL_CS3 0x30000000 +#define MD_CNTL_CS_SEL_CS0_CS1 0x40000000 +#define MD_CNTL_CS_SEL_CS2_CS3 0x50000000 +#define MD_CNTL_MD_SEL_MR 0x00000000 +#define MD_CNTL_MD_SEL_EMR 0x01000000 +#define MD_CNTL_MD_SEL_EMR2 0x02000000 +#define MD_CNTL_MD_SEL_EMR3 0x03000000 +#define MD_CNTL_SET_REF 0x00800000 +#define MD_CNTL_SET_PRE 0x00400000 +#define MD_CNTL_CKE_CNTL_LOW 0x00100000 +#define MD_CNTL_CKE_CNTL_HIGH 0x00200000 +#define MD_CNTL_WRCW 0x00080000 +#define MD_CNTL_MD_VALUE(x) (x & 0x0000FFFF) +#define MD_CNTL_CS_SEL(x) (((x) & 0x7) << 28) +#define MD_CNTL_MD_SEL(x) (((x) & 0xf) << 24) + +/* DDR_CDR1 */ +#define DDR_CDR1_DHC_EN 0x80000000 +#define DDR_CDR1_V0PT9_EN 0x40000000 +#define DDR_CDR1_ODT_SHIFT 17 +#define DDR_CDR1_ODT_MASK 0x6 +#define DDR_CDR2_ODT_MASK 0x1 +#define DDR_CDR1_ODT(x) ((x & DDR_CDR1_ODT_MASK) << DDR_CDR1_ODT_SHIFT) +#define DDR_CDR2_ODT(x) (x & DDR_CDR2_ODT_MASK) +#define DDR_CDR2_VREF_OVRD(x) (0x00008080 | ((((x) - 37) & 0x3F) << 8)) +#define DDR_CDR2_VREF_TRAIN_EN 0x00000080 +#define DDR_CDR2_VREF_RANGE_2 0x00000040 + +/* DDR ERR_DISABLE */ +#define DDR_ERR_DISABLE_APED (1 << 8) /* Address parity error disable */ + +/* Mode Registers */ +#define DDR_MR5_CA_PARITY_LAT_4_CLK 0x1 /* for DDR4-1600/1866/2133 */ +#define DDR_MR5_CA_PARITY_LAT_5_CLK 0x2 /* for DDR4-2400 */ + +/* DEBUG_26 register */ +#define DDR_CAS_TO_PRE_SUB_MASK 0x0000f000 /* CAS to preamble subtract value */ +#define DDR_CAS_TO_PRE_SUB_SHIFT 12 + +/* DEBUG_29 register */ +#define DDR_TX_BD_DIS (1 << 10) /* Transmit Bit Deskew Disable */ + +static inline int is_ddr1(const memctl_options_t *popts) +{ + return IS_ENABLED(CONFIG_DDR_FSL_DDR1) && + popts->ddrtype == SDRAM_TYPE_DDR1; +} + +static inline int is_ddr2(const memctl_options_t *popts) +{ + return IS_ENABLED(CONFIG_DDR_FSL_DDR2) && + popts->ddrtype == SDRAM_TYPE_DDR2; +} + +static inline int is_ddr3(const memctl_options_t *popts) +{ + return IS_ENABLED(CONFIG_DDR_FSL_DDR3) && + popts->ddrtype == SDRAM_TYPE_DDR3; +} + +static inline int is_ddr4(const memctl_options_t *popts) +{ + return IS_ENABLED(CONFIG_DDR_FSL_DDR4) && + popts->ddrtype == SDRAM_TYPE_DDR4; +} + +static inline int is_ddr3_4(const memctl_options_t *popts) +{ + return is_ddr3(popts) || is_ddr4(popts); +} + +struct fsl_ddr_info; + +phys_size_t fsl_ddr_sdram(struct fsl_ddr_info *pinfo); +u32 fsl_ddr_get_intl3r(void); + +void board_mem_sleep_setup(void); +static inline bool is_warm_boot(void) +{ + return false; +} + +int fsl_dp_resume(void); + +struct fsl_ddr_controller; + +u32 fsl_ddr_get_version(struct fsl_ddr_controller *c); + +unsigned int ddr1_compute_dimm_parameters(struct fsl_ddr_controller *c, + const struct ddr1_spd_eeprom *spd, + struct dimm_params *pdimm); +unsigned int ddr2_compute_dimm_parameters(struct fsl_ddr_controller *c, + const struct ddr2_spd_eeprom *spd, + struct dimm_params *pdimm); +unsigned int ddr3_compute_dimm_parameters(struct fsl_ddr_controller *c, + const struct ddr3_spd_eeprom *spd, + struct dimm_params *pdimm); +unsigned int ddr4_compute_dimm_parameters(struct fsl_ddr_controller *c, + const struct ddr4_spd_eeprom *spd, + struct dimm_params *pdimm); +void fsl_ddr_set_intl3r(const unsigned int granule_size); + +unsigned int compute_fsl_memctl_config_regs(struct fsl_ddr_controller *c); +unsigned int compute_lowest_common_dimm_parameters(struct fsl_ddr_controller *c); +unsigned int populate_memctl_options(struct fsl_ddr_controller *c); +void check_interleaving_options(struct fsl_ddr_info *pinfo); + +unsigned int mclk_to_picos(struct fsl_ddr_controller *c, unsigned int mclk); +unsigned int get_memory_clk_period_ps(struct fsl_ddr_controller *c); +unsigned int picos_to_mclk(struct fsl_ddr_controller *c, unsigned int picos); + +void fsl_ddr_set_memctl_regs(struct fsl_ddr_controller *c, int step); + +void erratum_a009942_check_cpo(void); + +#endif diff --git a/drivers/ddr/fsl/fsl_ddr_gen4.c b/drivers/ddr/fsl/fsl_ddr_gen4.c new file mode 100644 index 0000000000..ac68e4ff03 --- /dev/null +++ b/drivers/ddr/fsl/fsl_ddr_gen4.c @@ -0,0 +1,501 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2014-2015 Freescale Semiconductor, Inc. + */ + +#include <common.h> +#include <asm/io.h> +#include <soc/fsl/fsl_ddr_sdram.h> +#include <soc/fsl/fsl_immap.h> +#include <soc/fsl/immap_lsch2.h> +#include <asm/system.h> +#include "fsl_ddr.h" + +#define CTLR_INTLV_MASK 0x20000000 + +static void set_wait_for_bits_clear(void *ptr, u32 value, u32 bits) +{ + int timeout = 1000; + + ddr_out32(ptr, value); + + while (ddr_in32(ptr) & bits) { + udelay(100); + timeout--; + } + if (timeout <= 0) + printf("Error: wait for clear timeout.\n"); +} + +/* + * regs has the to-be-set values for DDR controller registers + * ctrl_num is the DDR controller number + * step: 0 goes through the initialization in one pass + * 1 sets registers and returns before enabling controller + * 2 resumes from step 1 and continues to initialize + * Dividing the initialization to two steps to deassert DDR reset signal + * to comply with JEDEC specs for RDIMMs. + */ +void fsl_ddr_set_memctl_regs(struct fsl_ddr_controller *c, int step) +{ + struct ccsr_ddr __iomem *ddr = c->base; + const fsl_ddr_cfg_regs_t *regs = &c->fsl_ddr_config_reg; + unsigned int i, bus_width; + u32 temp32; + u32 total_gb_size_per_controller; + int timeout; + int mod_bnds = 0; + u32 mr6; + u32 vref_seq1[3] = {0x80, 0x96, 0x16}; /* for range 1 */ + u32 vref_seq2[3] = {0xc0, 0xf0, 0x70}; /* for range 2 */ + u32 *vref_seq = vref_seq1; + u32 mtcr, err_detect, err_sbe; + u32 cs0_bnds, cs1_bnds, cs2_bnds, cs3_bnds, cs0_config; + mod_bnds = regs->cs[0].config & CTLR_INTLV_MASK; + + if (step == 2) + goto step2; + + /* Set cdr1 first in case 0.9v VDD is enabled for some SoCs*/ + ddr_out32(&ddr->ddr_cdr1, regs->ddr_cdr1); + + if (regs->ddr_eor) + ddr_out32(&ddr->eor, regs->ddr_eor); + + ddr_out32(&ddr->sdram_clk_cntl, regs->ddr_sdram_clk_cntl); + for (i = 0; i < c->chip_selects_per_ctrl; i++) { + if (i == 0) { + if (mod_bnds) { + debug("modified bnds\n"); + ddr_out32(&ddr->cs0_bnds, + (regs->cs[i].bnds & 0xfffefffe) >> 1); + ddr_out32(&ddr->cs0_config, + (regs->cs[i].config & + ~CTLR_INTLV_MASK)); + } else { + ddr_out32(&ddr->cs0_bnds, regs->cs[i].bnds); + ddr_out32(&ddr->cs0_config, regs->cs[i].config); + } + ddr_out32(&ddr->cs0_config_2, regs->cs[i].config_2); + + } else if (i == 1) { + if (mod_bnds) { + ddr_out32(&ddr->cs1_bnds, + (regs->cs[i].bnds & 0xfffefffe) >> 1); + } else { + ddr_out32(&ddr->cs1_bnds, regs->cs[i].bnds); + } + ddr_out32(&ddr->cs1_config, regs->cs[i].config); + ddr_out32(&ddr->cs1_config_2, regs->cs[i].config_2); + + } else if (i == 2) { + if (mod_bnds) { + ddr_out32(&ddr->cs2_bnds, + (regs->cs[i].bnds & 0xfffefffe) >> 1); + } else { + ddr_out32(&ddr->cs2_bnds, regs->cs[i].bnds); + } + ddr_out32(&ddr->cs2_config, regs->cs[i].config); + ddr_out32(&ddr->cs2_config_2, regs->cs[i].config_2); + + } else if (i == 3) { + if (mod_bnds) { + ddr_out32(&ddr->cs3_bnds, + (regs->cs[i].bnds & 0xfffefffe) >> 1); + } else { + ddr_out32(&ddr->cs3_bnds, regs->cs[i].bnds); + } + ddr_out32(&ddr->cs3_config, regs->cs[i].config); + ddr_out32(&ddr->cs3_config_2, regs->cs[i].config_2); + } + } + + ddr_out32(&ddr->timing_cfg_3, regs->timing_cfg_3); + ddr_out32(&ddr->timing_cfg_0, regs->timing_cfg_0); + ddr_out32(&ddr->timing_cfg_1, regs->timing_cfg_1); + ddr_out32(&ddr->timing_cfg_2, regs->timing_cfg_2); + ddr_out32(&ddr->timing_cfg_4, regs->timing_cfg_4); + ddr_out32(&ddr->timing_cfg_5, regs->timing_cfg_5); + ddr_out32(&ddr->timing_cfg_6, regs->timing_cfg_6); + ddr_out32(&ddr->timing_cfg_7, regs->timing_cfg_7); + ddr_out32(&ddr->timing_cfg_8, regs->timing_cfg_8); + ddr_out32(&ddr->timing_cfg_9, regs->timing_cfg_9); + ddr_out32(&ddr->ddr_zq_cntl, regs->ddr_zq_cntl); + ddr_out32(&ddr->dq_map_0, regs->dq_map_0); + ddr_out32(&ddr->dq_map_1, regs->dq_map_1); + ddr_out32(&ddr->dq_map_2, regs->dq_map_2); + ddr_out32(&ddr->dq_map_3, regs->dq_map_3); + ddr_out32(&ddr->sdram_cfg_3, regs->ddr_sdram_cfg_3); + ddr_out32(&ddr->sdram_mode, regs->ddr_sdram_mode); + ddr_out32(&ddr->sdram_mode_2, regs->ddr_sdram_mode_2); + ddr_out32(&ddr->sdram_mode_3, regs->ddr_sdram_mode_3); + ddr_out32(&ddr->sdram_mode_4, regs->ddr_sdram_mode_4); + ddr_out32(&ddr->sdram_mode_5, regs->ddr_sdram_mode_5); + ddr_out32(&ddr->sdram_mode_6, regs->ddr_sdram_mode_6); + ddr_out32(&ddr->sdram_mode_7, regs->ddr_sdram_mode_7); + ddr_out32(&ddr->sdram_mode_8, regs->ddr_sdram_mode_8); + ddr_out32(&ddr->sdram_mode_9, regs->ddr_sdram_mode_9); + ddr_out32(&ddr->sdram_mode_10, regs->ddr_sdram_mode_10); + ddr_out32(&ddr->sdram_mode_11, regs->ddr_sdram_mode_11); + ddr_out32(&ddr->sdram_mode_12, regs->ddr_sdram_mode_12); + ddr_out32(&ddr->sdram_mode_13, regs->ddr_sdram_mode_13); + ddr_out32(&ddr->sdram_mode_14, regs->ddr_sdram_mode_14); + ddr_out32(&ddr->sdram_mode_15, regs->ddr_sdram_mode_15); + ddr_out32(&ddr->sdram_mode_16, regs->ddr_sdram_mode_16); + ddr_out32(&ddr->sdram_md_cntl, regs->ddr_sdram_md_cntl); + + if (c->erratum_A009663) + ddr_out32(&ddr->sdram_interval, + regs->ddr_sdram_interval & ~SDRAM_INTERVAL_BSTOPRE); + else + ddr_out32(&ddr->sdram_interval, regs->ddr_sdram_interval); + + ddr_out32(&ddr->sdram_data_init, regs->ddr_data_init); + ddr_out32(&ddr->ddr_wrlvl_cntl, regs->ddr_wrlvl_cntl); + if (regs->ddr_wrlvl_cntl_2) + ddr_out32(&ddr->ddr_wrlvl_cntl_2, regs->ddr_wrlvl_cntl_2); + if (regs->ddr_wrlvl_cntl_3) + ddr_out32(&ddr->ddr_wrlvl_cntl_3, regs->ddr_wrlvl_cntl_3); + + ddr_out32(&ddr->ddr_sr_cntr, regs->ddr_sr_cntr); + ddr_out32(&ddr->ddr_sdram_rcw_1, regs->ddr_sdram_rcw_1); + ddr_out32(&ddr->ddr_sdram_rcw_2, regs->ddr_sdram_rcw_2); + ddr_out32(&ddr->ddr_sdram_rcw_3, regs->ddr_sdram_rcw_3); + ddr_out32(&ddr->ddr_sdram_rcw_4, regs->ddr_sdram_rcw_4); + ddr_out32(&ddr->ddr_sdram_rcw_5, regs->ddr_sdram_rcw_5); + ddr_out32(&ddr->ddr_sdram_rcw_6, regs->ddr_sdram_rcw_6); + + if (is_warm_boot()) { + ddr_out32(&ddr->sdram_cfg_2, + regs->ddr_sdram_cfg_2 & ~SDRAM_CFG2_D_INIT); + ddr_out32(&ddr->init_addr, 0x80000000); /* FIXME */ + ddr_out32(&ddr->init_ext_addr, DDR_INIT_ADDR_EXT_UIA); + + /* DRAM VRef will not be trained */ + ddr_out32(&ddr->ddr_cdr2, + regs->ddr_cdr2 & ~DDR_CDR2_VREF_TRAIN_EN); + } else { + ddr_out32(&ddr->sdram_cfg_2, regs->ddr_sdram_cfg_2); + ddr_out32(&ddr->init_addr, regs->ddr_init_addr); + ddr_out32(&ddr->init_ext_addr, regs->ddr_init_ext_addr); + ddr_out32(&ddr->ddr_cdr2, regs->ddr_cdr2); + } + + /* part 1 of 2 */ + if (c->erratum_A009803) { + if (regs->ddr_sdram_cfg_2 & SDRAM_CFG2_AP_EN) { + if (regs->ddr_sdram_cfg & SDRAM_CFG_RD_EN) { /* for RDIMM */ + ddr_out32(&ddr->ddr_sdram_rcw_2, + regs->ddr_sdram_rcw_2 & ~0xf0); + } + ddr_out32(&ddr->err_disable, regs->err_disable | + DDR_ERR_DISABLE_APED); + } + } else { + ddr_out32(&ddr->err_disable, regs->err_disable); + } + ddr_out32(&ddr->err_int_en, regs->err_int_en); + for (i = 0; i < 64; i++) { + if (regs->debug[i]) { + debug("Write to debug_%d as %08x\n", + i+1, regs->debug[i]); + ddr_out32(&ddr->debug[i], regs->debug[i]); + } + } + + if (c->erratum_A008511) { + /* Part 1 of 2 */ + if (fsl_ddr_get_version(c) == 0x50200) { + /* Disable DRAM VRef training */ + ddr_out32(&ddr->ddr_cdr2, + regs->ddr_cdr2 & ~DDR_CDR2_VREF_TRAIN_EN); + /* disable transmit bit deskew */ + temp32 = ddr_in32(&ddr->debug[28]); + temp32 |= DDR_TX_BD_DIS; + ddr_out32(&ddr->debug[28], temp32); + ddr_out32(&ddr->debug[25], 0x9000); + } else if (fsl_ddr_get_version(c) == 0x50201) { + /* Output enable forced off */ + ddr_out32(&ddr->debug[37], 1 << 31); + /* Enable Vref training */ + ddr_out32(&ddr->ddr_cdr2, + regs->ddr_cdr2 | DDR_CDR2_VREF_TRAIN_EN); + } else { + debug("Erratum A008511 doesn't apply.\n"); + } + } + + if (c->erratum_A009803 || c->erratum_A008511) + /* Disable D_INIT */ + ddr_out32(&ddr->sdram_cfg_2, + regs->ddr_sdram_cfg_2 & ~SDRAM_CFG2_D_INIT); + + if (c->erratum_A009801) { + temp32 = ddr_in32(&ddr->debug[25]); + temp32 &= ~DDR_CAS_TO_PRE_SUB_MASK; + temp32 |= 9 << DDR_CAS_TO_PRE_SUB_SHIFT; + ddr_out32(&ddr->debug[25], temp32); + } + + if (c->erratum_A010165) { + temp32 = c->ddr_freq / 1000000; + if ((temp32 > 1900) && (temp32 < 2300)) { + temp32 = ddr_in32(&ddr->debug[28]); + ddr_out32(&ddr->debug[28], temp32 | 0x000a0000); + } + } + + /* + * For RDIMMs, JEDEC spec requires clocks to be stable before reset is + * deasserted. Clocks start when any chip select is enabled and clock + * control register is set. Because all DDR components are connected to + * one reset signal, this needs to be done in two steps. Step 1 is to + * get the clocks started. Step 2 resumes after reset signal is + * deasserted. + */ + if (step == 1) { + udelay(200); + return; + } + +step2: + /* Set, but do not enable the memory */ + temp32 = regs->ddr_sdram_cfg; + temp32 &= ~(SDRAM_CFG_MEM_EN); + ddr_out32(&ddr->sdram_cfg, temp32); + + /* + * 500 painful micro-seconds must elapse between + * the DDR clock setup and the DDR config enable. + * DDR2 need 200 us, and DDR3 need 500 us from spec, + * we choose the max, that is 500 us for all of case. + */ + udelay(500); + dsb(); + isb(); + + if (is_warm_boot()) { + /* enter self-refresh */ + temp32 = ddr_in32(&ddr->sdram_cfg_2); + temp32 |= SDRAM_CFG2_FRC_SR; + ddr_out32(&ddr->sdram_cfg_2, temp32); + /* do board specific memory setup */ + board_mem_sleep_setup(); + + temp32 = (ddr_in32(&ddr->sdram_cfg) | SDRAM_CFG_BI); + } else { + temp32 = ddr_in32(&ddr->sdram_cfg) & ~SDRAM_CFG_BI; + } + + /* Let the controller go */ + ddr_out32(&ddr->sdram_cfg, temp32 | SDRAM_CFG_MEM_EN); + dsb(); + isb(); + + if (c->erratum_A008511 || c->erratum_A009803) { + /* Part 2 of 2 */ + timeout = 40; + /* Wait for idle. D_INIT needs to be cleared earlier, or timeout */ + while (!(ddr_in32(&ddr->debug[1]) & 0x2) && timeout > 0) { + udelay(1000); + timeout--; + } + if (timeout <= 0) { + printf("Controler %d timeout, debug_2 = %x\n", + c->num, ddr_in32(&ddr->debug[1])); + } + } + + if (c->erratum_A008511) { + /* This erraum only applies to verion 5.2.0 */ + if (fsl_ddr_get_version(c) == 0x50200) { + /* The vref setting sequence is different for range 2 */ + if (regs->ddr_cdr2 & DDR_CDR2_VREF_RANGE_2) + vref_seq = vref_seq2; + + /* Set VREF */ + for (i = 0; i < c->chip_selects_per_ctrl; i++) { + if (!(regs->cs[i].config & SDRAM_CS_CONFIG_EN)) + continue; + + mr6 = (regs->ddr_sdram_mode_10 >> 16) | + MD_CNTL_MD_EN | + MD_CNTL_CS_SEL(i) | + MD_CNTL_MD_SEL(6) | + 0x00200000; + temp32 = mr6 | vref_seq[0]; + set_wait_for_bits_clear(&ddr->sdram_md_cntl, + temp32, MD_CNTL_MD_EN); + udelay(1); + debug("MR6 = 0x%08x\n", temp32); + temp32 = mr6 | vref_seq[1]; + set_wait_for_bits_clear(&ddr->sdram_md_cntl, + temp32, MD_CNTL_MD_EN); + udelay(1); + debug("MR6 = 0x%08x\n", temp32); + temp32 = mr6 | vref_seq[2]; + set_wait_for_bits_clear(&ddr->sdram_md_cntl, + temp32, MD_CNTL_MD_EN); + udelay(1); + debug("MR6 = 0x%08x\n", temp32); + } + ddr_out32(&ddr->sdram_md_cntl, 0); + temp32 = ddr_in32(&ddr->debug[28]); + temp32 &= ~DDR_TX_BD_DIS; /* Enable deskew */ + ddr_out32(&ddr->debug[28], temp32); + ddr_out32(&ddr->debug[1], 0x400); /* restart deskew */ + /* wait for idle */ + timeout = 40; + while (!(ddr_in32(&ddr->debug[1]) & 0x2) && timeout > 0) { + udelay(1000); + timeout--; + } + if (timeout <= 0) { + printf("Controler %d timeout, debug_2 = %x\n", + c->num, ddr_in32(&ddr->debug[1])); + } + } + } + + if (c->erratum_A009803 && regs->ddr_sdram_cfg_2 & SDRAM_CFG2_AP_EN) { + /* if it's RDIMM */ + if (regs->ddr_sdram_cfg & SDRAM_CFG_RD_EN) { + for (i = 0; i < c->chip_selects_per_ctrl; i++) { + if (!(regs->cs[i].config & SDRAM_CS_CONFIG_EN)) + continue; + set_wait_for_bits_clear(&ddr->sdram_md_cntl, + MD_CNTL_MD_EN | + MD_CNTL_CS_SEL(i) | + 0x070000ed, + MD_CNTL_MD_EN); + udelay(1); + } + } + + ddr_out32(&ddr->err_disable, + regs->err_disable & ~DDR_ERR_DISABLE_APED); + } + + /* Restore D_INIT */ + ddr_out32(&ddr->sdram_cfg_2, regs->ddr_sdram_cfg_2); + + total_gb_size_per_controller = 0; + for (i = 0; i < c->chip_selects_per_ctrl; i++) { + if (!(regs->cs[i].config & 0x80000000)) + continue; + total_gb_size_per_controller += 1 << ( + ((regs->cs[i].config >> 14) & 0x3) + 2 + + ((regs->cs[i].config >> 8) & 0x7) + 12 + + ((regs->cs[i].config >> 4) & 0x3) + 0 + + ((regs->cs[i].config >> 0) & 0x7) + 8 + + ((regs->ddr_sdram_cfg_3 >> 4) & 0x3) + + 3 - ((regs->ddr_sdram_cfg >> 19) & 0x3) - + 26); /* minus 26 (count of 64M) */ + } + /* + * total memory / bus width = transactions needed + * transactions needed / data rate = seconds + * to add plenty of buffer, double the time + * For example, 2GB on 666MT/s 64-bit bus takes about 402ms + * Let's wait for 800ms + */ + bus_width = 3 - ((ddr_in32(&ddr->sdram_cfg) & SDRAM_CFG_DBW_MASK) + >> SDRAM_CFG_DBW_SHIFT); + timeout = ((total_gb_size_per_controller << (6 - bus_width)) * 100 / + (c->ddr_freq >> 20)) << 2; + total_gb_size_per_controller >>= 4; /* shift down to gb size */ + debug("total %d GB\n", total_gb_size_per_controller); + debug("Need to wait up to %d * 10ms\n", timeout); + + /* Poll DDR_SDRAM_CFG_2[D_INIT] bit until auto-data init is done. */ + while ((ddr_in32(&ddr->sdram_cfg_2) & SDRAM_CFG2_D_INIT) && + (timeout >= 0)) { + udelay(10000); /* throttle polling rate */ + timeout--; + } + + if (timeout <= 0) + printf("Waiting for D_INIT timeout. Memory may not work.\n"); + + if (mod_bnds) { + debug("Reset to original bnds\n"); + ddr_out32(&ddr->cs0_bnds, regs->cs[0].bnds); + ddr_out32(&ddr->cs1_bnds, regs->cs[1].bnds); + ddr_out32(&ddr->cs2_bnds, regs->cs[2].bnds); + ddr_out32(&ddr->cs3_bnds, regs->cs[3].bnds); + ddr_out32(&ddr->cs0_config, regs->cs[0].config); + } + + if (c->erratum_A009663) + ddr_out32(&ddr->sdram_interval, regs->ddr_sdram_interval); + + if (is_warm_boot()) { + /* exit self-refresh */ + temp32 = ddr_in32(&ddr->sdram_cfg_2); + temp32 &= ~SDRAM_CFG2_FRC_SR; + ddr_out32(&ddr->sdram_cfg_2, temp32); + } + +#define BIST_PATTERN1 0xFFFFFFFF +#define BIST_PATTERN2 0x0 +#define BIST_CR 0x80010000 +#define BIST_CR_EN 0x80000000 +#define BIST_CR_STAT 0x00000001 + /* Perform build-in test on memory. Three-way interleaving is not yet + * supported by this code. */ + if (0) { + printf("Running BIST test. This will take a while..."); + cs0_config = ddr_in32(&ddr->cs0_config); + cs0_bnds = ddr_in32(&ddr->cs0_bnds); + cs1_bnds = ddr_in32(&ddr->cs1_bnds); + cs2_bnds = ddr_in32(&ddr->cs2_bnds); + cs3_bnds = ddr_in32(&ddr->cs3_bnds); + if (cs0_config & CTLR_INTLV_MASK) { + /* set bnds to non-interleaving */ + ddr_out32(&ddr->cs0_bnds, (cs0_bnds & 0xfffefffe) >> 1); + ddr_out32(&ddr->cs1_bnds, (cs1_bnds & 0xfffefffe) >> 1); + ddr_out32(&ddr->cs2_bnds, (cs2_bnds & 0xfffefffe) >> 1); + ddr_out32(&ddr->cs3_bnds, (cs3_bnds & 0xfffefffe) >> 1); + } + ddr_out32(&ddr->mtp1, BIST_PATTERN1); + ddr_out32(&ddr->mtp2, BIST_PATTERN1); + ddr_out32(&ddr->mtp3, BIST_PATTERN2); + ddr_out32(&ddr->mtp4, BIST_PATTERN2); + ddr_out32(&ddr->mtp5, BIST_PATTERN1); + ddr_out32(&ddr->mtp6, BIST_PATTERN1); + ddr_out32(&ddr->mtp7, BIST_PATTERN2); + ddr_out32(&ddr->mtp8, BIST_PATTERN2); + ddr_out32(&ddr->mtp9, BIST_PATTERN1); + ddr_out32(&ddr->mtp10, BIST_PATTERN2); + mtcr = BIST_CR; + ddr_out32(&ddr->mtcr, mtcr); + timeout = 100; + while (timeout > 0 && (mtcr & BIST_CR_EN)) { + mdelay(1000); + timeout--; + mtcr = ddr_in32(&ddr->mtcr); + } + if (timeout <= 0) + printf("Timeout\n"); + else + printf("Done\n"); + err_detect = ddr_in32(&ddr->err_detect); + err_sbe = ddr_in32(&ddr->err_sbe); + if (mtcr & BIST_CR_STAT) { + printf("BIST test failed on controller %d.\n", + c->num); + } + if (err_detect || (err_sbe & 0xffff)) { + printf("ECC error detected on controller %d.\n", + c->num); + } + + if (cs0_config & CTLR_INTLV_MASK) { + /* restore bnds registers */ + ddr_out32(&ddr->cs0_bnds, cs0_bnds); + ddr_out32(&ddr->cs1_bnds, cs1_bnds); + ddr_out32(&ddr->cs2_bnds, cs2_bnds); + ddr_out32(&ddr->cs3_bnds, cs3_bnds); + } + } +} diff --git a/drivers/ddr/fsl/lc_common_dimm_params.c b/drivers/ddr/fsl/lc_common_dimm_params.c new file mode 100644 index 0000000000..2de4cca9cc --- /dev/null +++ b/drivers/ddr/fsl/lc_common_dimm_params.c @@ -0,0 +1,542 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright 2008-2016 Freescale Semiconductor, Inc. + * Copyright 2017-2018 NXP Semiconductor + */ + +#include <common.h> +#include <soc/fsl/fsl_ddr_sdram.h> +#include <linux/log2.h> +#include "fsl_ddr.h" + +static unsigned int +compute_cas_latency_ddr34(memctl_options_t *popts, + struct fsl_ddr_controller *c, + const struct dimm_params *dimm_params, + struct common_timing_params *outpdimm, + unsigned int number_of_dimms) +{ + unsigned int i; + unsigned int common_caslat; + unsigned int caslat_actual; + unsigned int retry = 16; + unsigned int tmp = ~0; + const unsigned int mclk_ps = get_memory_clk_period_ps(c); + unsigned int taamax; + + if (is_ddr3(popts)) + taamax = 20000; + else + taamax = 18000; + + /* compute the common CAS latency supported between slots */ + for (i = 0; i < number_of_dimms; i++) { + if (dimm_params[i].n_ranks) + tmp &= dimm_params[i].caslat_x; + } + common_caslat = tmp; + + /* validate if the memory clk is in the range of dimms */ + if (mclk_ps < outpdimm->tckmin_x_ps) { + printf("DDR clock (MCLK cycle %u ps) is faster than " + "the slowest DIMM(s) (tCKmin %u ps) can support.\n", + mclk_ps, outpdimm->tckmin_x_ps); + } + + if (is_ddr4(popts) && mclk_ps > outpdimm->tckmax_ps) { + printf("DDR clock (MCLK cycle %u ps) is slower than DIMM(s) (tCKmax %u ps) can support.\n", + mclk_ps, outpdimm->tckmax_ps); + } + + /* determine the acutal cas latency */ + caslat_actual = (outpdimm->taamin_ps + mclk_ps - 1) / mclk_ps; + /* check if the dimms support the CAS latency */ + while (!(common_caslat & (1 << caslat_actual)) && retry > 0) { + caslat_actual++; + retry--; + } + /* once the caculation of caslat_actual is completed + * we must verify that this CAS latency value does not + * exceed tAAmax, which is 20 ns for all DDR3 speed grades, + * 18ns for all DDR4 speed grades. + */ + if (caslat_actual * mclk_ps > taamax) { + printf("The chosen cas latency %d is too large\n", + caslat_actual); + } + outpdimm->lowest_common_spd_caslat = caslat_actual; + debug("lowest_common_spd_caslat is 0x%x\n", caslat_actual); + + return 0; +} + +static unsigned int +compute_cas_latency_ddr12(memctl_options_t *popts, + struct fsl_ddr_controller *c, + const struct dimm_params *dimm_params, + struct common_timing_params *outpdimm, + unsigned int number_of_dimms) +{ + int i; + const unsigned int mclk_ps = get_memory_clk_period_ps(c); + unsigned int lowest_good_caslat; + unsigned int not_ok; + unsigned int temp1, temp2; + + debug("using mclk_ps = %u\n", mclk_ps); + if (mclk_ps > outpdimm->tckmax_ps) { + printf("Warning: DDR clock (%u ps) is slower than DIMM(s) (tCKmax %u ps)\n", + mclk_ps, outpdimm->tckmax_ps); + } + + /* + * Compute a CAS latency suitable for all DIMMs + * + * Strategy for SPD-defined latencies: compute only + * CAS latency defined by all DIMMs. + */ + + /* + * Step 1: find CAS latency common to all DIMMs using bitwise + * operation. + */ + temp1 = 0xFF; + for (i = 0; i < number_of_dimms; i++) { + if (dimm_params[i].n_ranks) { + temp2 = 0; + temp2 |= 1 << dimm_params[i].caslat_x; + temp2 |= 1 << dimm_params[i].caslat_x_minus_1; + temp2 |= 1 << dimm_params[i].caslat_x_minus_2; + /* + * If there was no entry for X-2 (X-1) in + * the SPD, then caslat_x_minus_2 + * (caslat_x_minus_1) contains either 255 or + * 0xFFFFFFFF because that's what the glorious + * __ilog2 function returns for an input of 0. + * On 32-bit PowerPC, left shift counts with bit + * 26 set (that the value of 255 or 0xFFFFFFFF + * will have), cause the destination register to + * be 0. That is why this works. + */ + temp1 &= temp2; + } + } + + /* + * Step 2: check each common CAS latency against tCK of each + * DIMM's SPD. + */ + lowest_good_caslat = 0; + temp2 = 0; + while (temp1) { + not_ok = 0; + temp2 = ilog2(temp1); + debug("checking common caslat = %u\n", temp2); + + /* Check if this CAS latency will work on all DIMMs at tCK. */ + for (i = 0; i < number_of_dimms; i++) { + if (!dimm_params[i].n_ranks) + continue; + + if (dimm_params[i].caslat_x == temp2) { + if (mclk_ps >= dimm_params[i].tckmin_x_ps) { + debug("CL = %u ok on DIMM %u at tCK=%u ps with tCKmin_X_ps of %u\n", + temp2, i, mclk_ps, + dimm_params[i].tckmin_x_ps); + continue; + } else { + not_ok++; + } + } + + if (dimm_params[i].caslat_x_minus_1 == temp2) { + unsigned int tckmin_x_minus_1_ps + = dimm_params[i].tckmin_x_minus_1_ps; + if (mclk_ps >= tckmin_x_minus_1_ps) { + debug("CL = %u ok on DIMM %u at tCK=%u ps with tckmin_x_minus_1_ps of %u\n", + temp2, i, mclk_ps, + tckmin_x_minus_1_ps); + continue; + } else { + not_ok++; + } + } + + if (dimm_params[i].caslat_x_minus_2 == temp2) { + unsigned int tckmin_x_minus_2_ps + = dimm_params[i].tckmin_x_minus_2_ps; + if (mclk_ps >= tckmin_x_minus_2_ps) { + debug("CL = %u ok on DIMM %u at tCK=%u ps with tckmin_x_minus_2_ps of %u\n", + temp2, i, mclk_ps, + tckmin_x_minus_2_ps); + continue; + } else { + not_ok++; + } + } + } + + if (!not_ok) + lowest_good_caslat = temp2; + + temp1 &= ~(1 << temp2); + } + + debug("lowest common SPD-defined CAS latency = %u\n", + lowest_good_caslat); + outpdimm->lowest_common_spd_caslat = lowest_good_caslat; + + + /* + * Compute a common 'de-rated' CAS latency. + * + * The strategy here is to find the *highest* dereated cas latency + * with the assumption that all of the DIMMs will support a dereated + * CAS latency higher than or equal to their lowest dereated value. + */ + temp1 = 0; + for (i = 0; i < number_of_dimms; i++) + temp1 = max(temp1, dimm_params[i].caslat_lowest_derated); + + outpdimm->highest_common_derated_caslat = temp1; + debug("highest common dereated CAS latency = %u\n", temp1); + + return 0; +} + +/* + * compute_lowest_common_dimm_parameters() + * + * Determine the worst-case DIMM timing parameters from the set of DIMMs + * whose parameters have been computed into the array pointed to + * by dimm_params. + */ +unsigned int +compute_lowest_common_dimm_parameters(struct fsl_ddr_controller *c) +{ + int number_of_dimms = c->dimm_slots_per_ctrl; + memctl_options_t *popts = &c->memctl_opts; + const struct dimm_params *dimm_params = c->dimm_params; + struct common_timing_params *outpdimm = &c->common_timing_params; + unsigned int i, j; + + unsigned int tckmin_x_ps = 0; + unsigned int tckmax_ps = 0xFFFFFFFF; + unsigned int trcd_ps = 0; + unsigned int trp_ps = 0; + unsigned int tras_ps = 0; + unsigned int taamin_ps = 0; + unsigned int twr_ps = 0; + unsigned int trfc1_ps = 0; + unsigned int trfc2_ps = 0; + unsigned int trfc4_ps = 0; + unsigned int trrds_ps = 0; + unsigned int trrdl_ps = 0; + unsigned int tccdl_ps = 0; + unsigned int trfc_slr_ps = 0; + unsigned int twtr_ps = 0; + unsigned int trfc_ps = 0; + unsigned int trrd_ps = 0; + unsigned int trtp_ps = 0; + unsigned int trc_ps = 0; + unsigned int refresh_rate_ps = 0; + unsigned int extended_op_srt = 1; + unsigned int tis_ps = 0; + unsigned int tih_ps = 0; + unsigned int tds_ps = 0; + unsigned int tdh_ps = 0; + unsigned int tdqsq_max_ps = 0; + unsigned int tqhs_ps = 0; + unsigned int temp1, temp2; + unsigned int additive_latency = 0; + + temp1 = 0; + for (i = 0; i < number_of_dimms; i++) { + /* + * If there are no ranks on this DIMM, + * it probably doesn't exist, so skip it. + */ + if (dimm_params[i].n_ranks == 0) { + temp1++; + continue; + } + if (dimm_params[i].n_ranks == 4 && i != 0) { + printf("Found Quad-rank DIMM in wrong bank, ignored." + " Software may not run as expected.\n"); + temp1++; + continue; + } + + /* + * check if quad-rank DIMM is plugged if + * CONFIG_CHIP_SELECT_QUAD_CAPABLE is not defined + * Only the board with proper design is capable + */ + if (dimm_params[i].n_ranks == 4 && \ + c->chip_selects_per_ctrl / c->dimm_slots_per_ctrl < 4) { + printf("Found Quad-rank DIMM, not able to support."); + temp1++; + continue; + } + + /* + * Find minimum tckmax_ps to find fastest slow speed, + * i.e., this is the slowest the whole system can go. + */ + outpdimm->tckmax_ps = min(tckmax_ps, + (unsigned int)dimm_params[i].tckmax_ps); + if (is_ddr3_4(popts)) + outpdimm->taamin_ps = max(taamin_ps, + (unsigned int)dimm_params[i].taa_ps); + outpdimm->tckmin_x_ps = max(tckmin_x_ps, + (unsigned int)dimm_params[i].tckmin_x_ps); + outpdimm->trcd_ps = max(trcd_ps, (unsigned int)dimm_params[i].trcd_ps); + outpdimm->trp_ps = max(trp_ps, (unsigned int)dimm_params[i].trp_ps); + outpdimm->tras_ps = max(tras_ps, (unsigned int)dimm_params[i].tras_ps); + + if (is_ddr4(popts)) { + outpdimm->twr_ps = 15000; + outpdimm->trfc1_ps = max(trfc1_ps, + (unsigned int)dimm_params[i].trfc1_ps); + outpdimm->trfc2_ps = max(trfc2_ps, + (unsigned int)dimm_params[i].trfc2_ps); + outpdimm->trfc4_ps = max(trfc4_ps, + (unsigned int)dimm_params[i].trfc4_ps); + outpdimm->trrds_ps = max(trrds_ps, + (unsigned int)dimm_params[i].trrds_ps); + outpdimm->trrdl_ps = max(trrdl_ps, + (unsigned int)dimm_params[i].trrdl_ps); + outpdimm->tccdl_ps = max(tccdl_ps, + (unsigned int)dimm_params[i].tccdl_ps); + outpdimm->trfc_slr_ps = max(trfc_slr_ps, + (unsigned int)dimm_params[i].trfc_slr_ps); + } else { + twr_ps = max(twr_ps, (unsigned int)dimm_params[i].twr_ps); + outpdimm->twtr_ps = max(twtr_ps, (unsigned int)dimm_params[i].twtr_ps); + outpdimm->trfc_ps = max(trfc_ps, (unsigned int)dimm_params[i].trfc_ps); + outpdimm->trrd_ps = max(trrd_ps, (unsigned int)dimm_params[i].trrd_ps); + outpdimm->trtp_ps = max(trtp_ps, (unsigned int)dimm_params[i].trtp_ps); + } + outpdimm->trc_ps = max(trc_ps, (unsigned int)dimm_params[i].trc_ps); + if (is_ddr1(popts) || is_ddr2(popts)) { + outpdimm->tis_ps = max(tis_ps, (unsigned int)dimm_params[i].tis_ps); + outpdimm->tih_ps = max(tih_ps, (unsigned int)dimm_params[i].tih_ps); + outpdimm->tds_ps = max(tds_ps, (unsigned int)dimm_params[i].tds_ps); + outpdimm->tdh_ps = max(tdh_ps, (unsigned int)dimm_params[i].tdh_ps); + outpdimm->tqhs_ps = max(tqhs_ps, (unsigned int)dimm_params[i].tqhs_ps); + /* + * Find maximum tdqsq_max_ps to find slowest. + * + * FIXME: is finding the slowest value the correct + * strategy for this parameter? + */ + outpdimm->tdqsq_max_ps = max(tdqsq_max_ps, + (unsigned int)dimm_params[i].tdqsq_max_ps); + } + outpdimm->refresh_rate_ps = max(refresh_rate_ps, + (unsigned int)dimm_params[i].refresh_rate_ps); + /* extended_op_srt is either 0 or 1, 0 having priority */ + outpdimm->extended_op_srt = min(extended_op_srt, + (unsigned int)dimm_params[i].extended_op_srt); + } + + outpdimm->ndimms_present = number_of_dimms - temp1; + + if (temp1 == number_of_dimms) { + debug("no dimms this memory controller\n"); + return 0; + } + + /* Determine common burst length for all DIMMs. */ + temp1 = 0xff; + for (i = 0; i < number_of_dimms; i++) { + if (dimm_params[i].n_ranks) { + temp1 &= dimm_params[i].burst_lengths_bitmask; + } + } + outpdimm->all_dimms_burst_lengths_bitmask = temp1; + + /* Determine if all DIMMs registered buffered. */ + temp1 = temp2 = 0; + for (i = 0; i < number_of_dimms; i++) { + if (dimm_params[i].n_ranks) { + if (dimm_params[i].registered_dimm) { + temp1 = 1; + printf("Detected RDIMM %s\n", + dimm_params[i].mpart); + } else { + temp2 = 1; + printf("Detected UDIMM %s\n", + dimm_params[i].mpart); + } + } + } + + outpdimm->all_dimms_registered = 0; + outpdimm->all_dimms_unbuffered = 0; + if (temp1 && !temp2) { + outpdimm->all_dimms_registered = 1; + } else if (!temp1 && temp2) { + outpdimm->all_dimms_unbuffered = 1; + } else { + printf("ERROR: Mix of registered buffered and unbuffered " + "DIMMs detected!\n"); + } + + temp1 = 0; + if (outpdimm->all_dimms_registered) + for (j = 0; j < 16; j++) { + outpdimm->rcw[j] = dimm_params[0].rcw[j]; + for (i = 1; i < number_of_dimms; i++) { + if (!dimm_params[i].n_ranks) + continue; + if (dimm_params[i].rcw[j] != dimm_params[0].rcw[j]) { + temp1 = 1; + break; + } + } + } + + if (temp1 != 0) + printf("ERROR: Mix different RDIMM detected!\n"); + + /* calculate cas latency for all DDR types */ + if (is_ddr3_4(popts)) { + if (compute_cas_latency_ddr34(popts, c, dimm_params, + outpdimm, number_of_dimms)) + return 1; + } else { + if (compute_cas_latency_ddr12(popts, c, dimm_params, + outpdimm, number_of_dimms)) + return 1; + } + + /* Determine if all DIMMs ECC capable. */ + temp1 = 1; + for (i = 0; i < number_of_dimms; i++) { + if (dimm_params[i].n_ranks && + !(dimm_params[i].edc_config & EDC_ECC)) { + temp1 = 0; + break; + } + } + if (temp1) { + debug("all DIMMs ECC capable\n"); + } else { + debug("Warning: not all DIMMs ECC capable, cant enable ECC\n"); + } + outpdimm->all_dimms_ecc_capable = temp1; + + /* + * Compute additive latency. + * + * For DDR1, additive latency should be 0. + * + * For DDR2, with ODT enabled, use "a value" less than ACTTORW, + * which comes from Trcd, and also note that: + * add_lat + caslat must be >= 4 + * + * For DDR3, we use the AL=0 + * + * When to use additive latency for DDR2: + * + * I. Because you are using CL=3 and need to do ODT on writes and + * want functionality. + * 1. Are you going to use ODT? (Does your board not have + * additional termination circuitry for DQ, DQS, DQS_, + * DM, RDQS, RDQS_ for x4/x8 configs?) + * 2. If so, is your lowest supported CL going to be 3? + * 3. If so, then you must set AL=1 because + * + * WL >= 3 for ODT on writes + * RL = AL + CL + * WL = RL - 1 + * -> + * WL = AL + CL - 1 + * AL + CL - 1 >= 3 + * AL + CL >= 4 + * QED + * + * RL >= 3 for ODT on reads + * RL = AL + CL + * + * Since CL aren't usually less than 2, AL=0 is a minimum, + * so the WL-derived AL should be the -- FIXME? + * + * II. Because you are using auto-precharge globally and want to + * use additive latency (posted CAS) to get more bandwidth. + * 1. Are you going to use auto-precharge mode globally? + * + * Use addtivie latency and compute AL to be 1 cycle less than + * tRCD, i.e. the READ or WRITE command is in the cycle + * immediately following the ACTIVATE command.. + * + * III. Because you feel like it or want to do some sort of + * degraded-performance experiment. + * 1. Do you just want to use additive latency because you feel + * like it? + * + * Validation: AL is less than tRCD, and within the other + * read-to-precharge constraints. + */ + + additive_latency = 0; + + if (is_ddr2(popts) && outpdimm->lowest_common_spd_caslat < 4 && + picos_to_mclk(c, trcd_ps > outpdimm->lowest_common_spd_caslat)) { + additive_latency = picos_to_mclk(c, trcd_ps) - + outpdimm->lowest_common_spd_caslat; + if (mclk_to_picos(c, additive_latency) > trcd_ps) { + additive_latency = picos_to_mclk(c, trcd_ps); + debug("setting additive_latency to %u because it was " + " greater than tRCD_ps\n", additive_latency); + } + } + + /* + * Validate additive latency + * + * AL <= tRCD(min) + */ + if (mclk_to_picos(c, additive_latency) > trcd_ps) { + printf("Error: invalid additive latency exceeds tRCD(min).\n"); + return 1; + } + + /* + * RL = CL + AL; RL >= 3 for ODT_RD_CFG to be enabled + * WL = RL - 1; WL >= 3 for ODT_WL_CFG to be enabled + * ADD_LAT (the register) must be set to a value less + * than ACTTORW if WL = 1, then AL must be set to 1 + * RD_TO_PRE (the register) must be set to a minimum + * tRTP + AL if AL is nonzero + */ + + /* + * Additive latency will be applied only if the memctl option to + * use it. + */ + outpdimm->additive_latency = additive_latency; + + debug("tCKmin_ps = %u\n", outpdimm->tckmin_x_ps); + debug("trcd_ps = %u\n", outpdimm->trcd_ps); + debug("trp_ps = %u\n", outpdimm->trp_ps); + debug("tras_ps = %u\n", outpdimm->tras_ps); + if (is_ddr4(popts)) { + debug("trfc1_ps = %u\n", trfc1_ps); + debug("trfc2_ps = %u\n", trfc2_ps); + debug("trfc4_ps = %u\n", trfc4_ps); + debug("trrds_ps = %u\n", trrds_ps); + debug("trrdl_ps = %u\n", trrdl_ps); + debug("tccdl_ps = %u\n", tccdl_ps); + debug("trfc_slr_ps = %u\n", trfc_slr_ps); + } else { + debug("twtr_ps = %u\n", outpdimm->twtr_ps); + debug("trfc_ps = %u\n", outpdimm->trfc_ps); + debug("trrd_ps = %u\n", outpdimm->trrd_ps); + } + debug("twr_ps = %u\n", outpdimm->twr_ps); + debug("trc_ps = %u\n", outpdimm->trc_ps); + + return 0; +} diff --git a/drivers/ddr/fsl/main.c b/drivers/ddr/fsl/main.c new file mode 100644 index 0000000000..b0df34c933 --- /dev/null +++ b/drivers/ddr/fsl/main.c @@ -0,0 +1,444 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright 2008-2014 Freescale Semiconductor, Inc. + */ + +/* + * Generic driver for Freescale DDR/DDR2/DDR3 memory controller. + * Based on code from spd_sdram.c + * Author: James Yang [at freescale.com] + */ +#include <common.h> +#include <soc/fsl/fsl_ddr_sdram.h> +#include <linux/log2.h> +#include "fsl_ddr.h" + +/* + * ASSUMPTIONS: + * - Same number of CONFIG_DIMM_SLOTS_PER_CTLR on each controller + * - Same memory data bus width on all controllers + * + * NOTES: + * + * The memory controller and associated documentation use confusing + * terminology when referring to the orgranization of DRAM. + * + * Here is a terminology translation table: + * + * memory controller/documention |industry |this code |signals + * -------------------------------|-----------|-----------|----------------- + * physical bank/bank |rank |rank |chip select (CS) + * logical bank/sub-bank |bank |bank |bank address (BA) + * page/row |row |page |row address + * ??? |column |column |column address + * + * The naming confusion is further exacerbated by the descriptions of the + * memory controller interleaving feature, where accesses are interleaved + * _BETWEEN_ two seperate memory controllers. This is configured only in + * CS0_CONFIG[INTLV_CTL] of each memory controller. + * + * memory controller documentation | number of chip selects + * | per memory controller supported + * --------------------------------|----------------------------------------- + * cache line interleaving | 1 (CS0 only) + * page interleaving | 1 (CS0 only) + * bank interleaving | 1 (CS0 only) + * superbank interleraving | depends on bank (chip select) + * | interleraving [rank interleaving] + * | mode used on every memory controller + * + * Even further confusing is the existence of the interleaving feature + * _WITHIN_ each memory controller. The feature is referred to in + * documentation as chip select interleaving or bank interleaving, + * although it is configured in the DDR_SDRAM_CFG field. + * + * Name of field | documentation name | this code + * -----------------------------|-----------------------|------------------ + * DDR_SDRAM_CFG[BA_INTLV_CTL] | Bank (chip select) | rank interleaving + * | interleaving + */ + +static unsigned long long step_assign_addresses_linear(struct fsl_ddr_info *pinfo, + unsigned long long current_mem_base) +{ + int i, j; + unsigned long long total_mem = 0; + + /* + * Simple linear assignment if memory + * controllers are not interleaved. + */ + for (i = 0; i < pinfo->num_ctrls; i++) { + struct fsl_ddr_controller *c = &pinfo->c[i]; + unsigned long long total_ctlr_mem = 0; + + c->common_timing_params.base_address = current_mem_base; + + for (j = 0; j < c->dimm_slots_per_ctrl; j++) { + /* Compute DIMM base addresses. */ + unsigned long long cap = c->dimm_params[j].capacity >> + pinfo->c[i].dbw_capacity_adjust; + + c->dimm_params[j].base_address = current_mem_base; + debug("ctrl %d dimm %d base 0x%llx\n", i, j, current_mem_base); + current_mem_base += cap; + total_ctlr_mem += cap; + } + debug("ctrl %d total 0x%llx\n", i, total_ctlr_mem); + c->common_timing_params.total_mem = total_ctlr_mem; + total_mem += total_ctlr_mem; + } + + return total_mem; +} + +static unsigned long long step_assign_addresses_interleaved(struct fsl_ddr_info *pinfo, + unsigned long long current_mem_base) +{ + unsigned long long total_mem, total_ctlr_mem; + unsigned long long rank_density, ctlr_density = 0; + int i; + + rank_density = pinfo->c[0].dimm_params[0].rank_density >> + pinfo->c[0].dbw_capacity_adjust; + + switch (pinfo->c[0].memctl_opts.ba_intlv_ctl & + FSL_DDR_CS0_CS1_CS2_CS3) { + case FSL_DDR_CS0_CS1_CS2_CS3: + ctlr_density = 4 * rank_density; + break; + case FSL_DDR_CS0_CS1: + case FSL_DDR_CS0_CS1_AND_CS2_CS3: + ctlr_density = 2 * rank_density; + break; + case FSL_DDR_CS2_CS3: + default: + ctlr_density = rank_density; + break; + } + + debug("rank density is 0x%llx, ctlr density is 0x%llx\n", + rank_density, ctlr_density); + + for (i = 0; i < pinfo->num_ctrls; i++) { + struct fsl_ddr_controller *c = &pinfo->c[i]; + + if (c->memctl_opts.memctl_interleaving) { + switch (c->memctl_opts.memctl_interleaving_mode) { + case FSL_DDR_256B_INTERLEAVING: + case FSL_DDR_CACHE_LINE_INTERLEAVING: + case FSL_DDR_PAGE_INTERLEAVING: + case FSL_DDR_BANK_INTERLEAVING: + case FSL_DDR_SUPERBANK_INTERLEAVING: + total_ctlr_mem = 2 * ctlr_density; + break; + case FSL_DDR_3WAY_1KB_INTERLEAVING: + case FSL_DDR_3WAY_4KB_INTERLEAVING: + case FSL_DDR_3WAY_8KB_INTERLEAVING: + total_ctlr_mem = 3 * ctlr_density; + break; + case FSL_DDR_4WAY_1KB_INTERLEAVING: + case FSL_DDR_4WAY_4KB_INTERLEAVING: + case FSL_DDR_4WAY_8KB_INTERLEAVING: + total_ctlr_mem = 4 * ctlr_density; + break; + default: + panic("Unknown interleaving mode"); + } + c->common_timing_params.base_address = current_mem_base; + c->common_timing_params.total_mem = total_ctlr_mem; + total_mem = current_mem_base + total_ctlr_mem; + debug("ctrl %d base 0x%llx\n", i, current_mem_base); + debug("ctrl %d total 0x%llx\n", i, total_ctlr_mem); + } else { + total_mem += step_assign_addresses_linear(pinfo, current_mem_base); + } + } + + return total_mem; +} + +static unsigned long long step_assign_addresses(struct fsl_ddr_info *pinfo) +{ + unsigned int i, j; + unsigned long long total_mem; + + /* + * If a reduced data width is requested, but the SPD + * specifies a physically wider device, adjust the + * computed dimm capacities accordingly before + * assigning addresses. + */ + for (i = 0; i < pinfo->num_ctrls; i++) { + struct fsl_ddr_controller *c = &pinfo->c[i]; + unsigned int found = 0; + + switch (c->memctl_opts.data_bus_width) { + case 2: + /* 16-bit */ + for (j = 0; j < c->dimm_slots_per_ctrl; j++) { + unsigned int dw; + if (!c->dimm_params[j].n_ranks) + continue; + dw = c->dimm_params[j].primary_sdram_width; + if ((dw == 72 || dw == 64)) { + pinfo->c[i].dbw_capacity_adjust = 2; + break; + } else if ((dw == 40 || dw == 32)) { + pinfo->c[i].dbw_capacity_adjust = 1; + break; + } + } + break; + + case 1: + /* 32-bit */ + for (j = 0; j < c->dimm_slots_per_ctrl; j++) { + unsigned int dw; + dw = c->dimm_params[j].data_width; + if (c->dimm_params[j].n_ranks + && (dw == 72 || dw == 64)) { + /* + * FIXME: can't really do it + * like this because this just + * further reduces the memory + */ + found = 1; + break; + } + } + if (found) + pinfo->c[i].dbw_capacity_adjust = 1; + + break; + + case 0: + /* 64-bit */ + break; + + default: + printf("unexpected data bus width " + "specified controller %u\n", i); + return 1; + } + debug("dbw_cap_adj[%d]=%d\n", i, pinfo->c[i].dbw_capacity_adjust); + } + + if (pinfo->c[0].memctl_opts.memctl_interleaving) + total_mem = step_assign_addresses_interleaved(pinfo, pinfo->mem_base); + else + total_mem = step_assign_addresses_linear(pinfo, pinfo->mem_base); + + debug("Total mem by %s is 0x%llx\n", __func__, total_mem); + + return total_mem; +} + +static int compute_dimm_parameters(struct fsl_ddr_controller *c, + struct spd_eeprom *spd, + struct dimm_params *pdimm) +{ + const memctl_options_t *popts = &c->memctl_opts; + int ret = -EINVAL; + + memset(pdimm, 0, sizeof(*pdimm)); + + if (is_ddr1(popts)) + ret = ddr1_compute_dimm_parameters(c, (void *)spd, pdimm); + else if (is_ddr2(popts)) + ret = ddr2_compute_dimm_parameters(c, (void *)spd, pdimm); + else if (is_ddr3(popts)) + ret = ddr3_compute_dimm_parameters(c, (void *)spd, pdimm); + else if (is_ddr4(popts)) + ret = ddr4_compute_dimm_parameters(c, (void *)spd, pdimm); + + return ret; +} + +static unsigned long long fsl_ddr_compute(struct fsl_ddr_info *pinfo) +{ + unsigned int i, j; + unsigned long long total_mem = 0; + int assert_reset = 0; + int retval; + unsigned int max_end = 0; + + /* STEP 2: Compute DIMM parameters from SPD data */ + for (i = 0; i < pinfo->num_ctrls; i++) { + struct fsl_ddr_controller *c = &pinfo->c[i]; + + if (!c->spd_installed_dimms) + continue; + + for (j = 0; j < c->dimm_slots_per_ctrl; j++) { + struct spd_eeprom *spd = &c->spd_installed_dimms[j]; + struct dimm_params *pdimm = &c->dimm_params[j]; + + retval = compute_dimm_parameters(c, spd, pdimm); + if (retval == 2) { + printf("Error: compute_dimm_parameters" + " non-zero returned FATAL value " + "for memctl=%u dimm=%u\n", i, j); + return 0; + } + if (retval) { + debug("Warning: compute_dimm_parameters" + " non-zero return value for memctl=%u " + "dimm=%u\n", i, j); + } + } + } + + /* + * STEP 3: Compute a common set of timing parameters + * suitable for all of the DIMMs on each memory controller + */ + for (i = 0; i < pinfo->num_ctrls; i++) { + struct fsl_ddr_controller *c = &pinfo->c[i]; + + debug("Computing lowest common DIMM parameters for memctl=%u\n", + i); + compute_lowest_common_dimm_parameters(c); + } + + /* STEP 4: Gather configuration requirements from user */ + for (i = 0; i < pinfo->num_ctrls; i++) { + struct fsl_ddr_controller *c = &pinfo->c[i]; + + debug("Reloading memory controller " + "configuration options for memctl=%u\n", i); + /* + * This "reloads" the memory controller options + * to defaults. If the user "edits" an option, + * next_step points to the step after this, + * which is currently STEP_ASSIGN_ADDRESSES. + */ + populate_memctl_options(c); + /* + * For RDIMMs, JEDEC spec requires clocks to be stable + * before reset signal is deasserted. For the boards + * using fixed parameters, this function should be + * be called from board init file. + */ + if (c->common_timing_params.all_dimms_registered) + assert_reset = 1; + } + + /* STEP 5: Assign addresses to chip selects */ + check_interleaving_options(pinfo); + total_mem = step_assign_addresses(pinfo); + debug("Total mem %llu assigned\n", total_mem); + + /* STEP 6: compute controller register values */ + debug("FSL Memory ctrl register computation\n"); + for (i = 0; i < pinfo->num_ctrls; i++) { + struct fsl_ddr_controller *c = &pinfo->c[i]; + + if (c->common_timing_params.ndimms_present == 0) { + memset(&c->fsl_ddr_config_reg, 0, + sizeof(fsl_ddr_cfg_regs_t)); + continue; + } + + compute_fsl_memctl_config_regs(c); + } + + /* + * Compute the amount of memory available just by + * looking for the highest valid CSn_BNDS value. + * This allows us to also experiment with using + * only CS0 when using dual-rank DIMMs. + */ + + for (i = 0; i < pinfo->num_ctrls; i++) { + struct fsl_ddr_controller *c = &pinfo->c[i]; + + for (j = 0; j < c->chip_selects_per_ctrl; j++) { + fsl_ddr_cfg_regs_t *reg = &c->fsl_ddr_config_reg; + if (reg->cs[j].config & 0x80000000) { + unsigned int end; + /* + * 0xfffffff is a special value we put + * for unused bnds + */ + if (reg->cs[j].bnds == 0xffffffff) + continue; + end = reg->cs[j].bnds & 0xffff; + if (end > max_end) { + max_end = end; + } + } + } + } + + total_mem = 1 + (((unsigned long long)max_end << 24ULL) | + 0xFFFFFFULL) - pinfo->mem_base; + + return total_mem; +} + +phys_size_t fsl_ddr_sdram(struct fsl_ddr_info *pinfo) +{ + unsigned int i; + unsigned long long total_memory; + int deassert_reset = 0; + + total_memory = fsl_ddr_compute(pinfo); + + /* setup 3-way interleaving before enabling DDRC */ + switch (pinfo->c[0].memctl_opts.memctl_interleaving_mode) { + case FSL_DDR_3WAY_1KB_INTERLEAVING: + case FSL_DDR_3WAY_4KB_INTERLEAVING: + case FSL_DDR_3WAY_8KB_INTERLEAVING: + fsl_ddr_set_intl3r( + pinfo->c[0].memctl_opts. + memctl_interleaving_mode); + break; + default: + break; + } + + /* + * Program configuration registers. + * JEDEC specs requires clocks to be stable before deasserting reset + * for RDIMMs. Clocks start after chip select is enabled and clock + * control register is set. During step 1, all controllers have their + * registers set but not enabled. Step 2 proceeds after deasserting + * reset through board FPGA or GPIO. + * For non-registered DIMMs, initialization can go through but it is + * also OK to follow the same flow. + */ + for (i = 0; i < pinfo->num_ctrls; i++) { + struct fsl_ddr_controller *c = &pinfo->c[i]; + + if (c->common_timing_params.all_dimms_registered) + deassert_reset = 1; + } + for (i = 0; i < pinfo->num_ctrls; i++) { + struct fsl_ddr_controller *c = &pinfo->c[i]; + + debug("Programming controller %u\n", i); + if (c->common_timing_params.ndimms_present == 0) { + debug("No dimms present on controller %u; " + "skipping programming\n", i); + continue; + } + /* + * The following call with step = 1 returns before enabling + * the controller. It has to finish with step = 2 later. + */ + fsl_ddr_set_memctl_regs(c, deassert_reset ? 1 : 0); + } + if (deassert_reset) { + for (i = 0; i < pinfo->num_ctrls; i++) { + struct fsl_ddr_controller *c = &pinfo->c[i]; + + /* Call with step = 2 to continue initialization */ + fsl_ddr_set_memctl_regs(c, 2); + } + } + + debug("total_memory by %s = %llu\n", __func__, total_memory); + + return total_memory; +} diff --git a/drivers/ddr/fsl/options.c b/drivers/ddr/fsl/options.c new file mode 100644 index 0000000000..73e9ab044e --- /dev/null +++ b/drivers/ddr/fsl/options.c @@ -0,0 +1,1133 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2008, 2010-2016 Freescale Semiconductor, Inc. + * Copyright 2017-2018 NXP Semiconductor + */ + +#include <common.h> +#include <soc/fsl/fsl_ddr_sdram.h> +#include "fsl_ddr.h" + +struct dynamic_odt { + unsigned int odt_rd_cfg; + unsigned int odt_wr_cfg; + unsigned int odt_rtt_norm; + unsigned int odt_rtt_wr; +}; + +/* Quad rank is not verified yet due availability. + * Replacing 20 OHM with 34 OHM since DDR4 doesn't have 20 OHM option + */ +static const struct dynamic_odt single_Q_ddr4[4] = { + { /* cs0 */ + FSL_DDR_ODT_NEVER, + FSL_DDR_ODT_CS_AND_OTHER_DIMM, + DDR4_RTT_34_OHM, /* unverified */ + DDR4_RTT_120_OHM + }, + { /* cs1 */ + FSL_DDR_ODT_NEVER, + FSL_DDR_ODT_NEVER, + DDR4_RTT_OFF, + DDR4_RTT_120_OHM + }, + { /* cs2 */ + FSL_DDR_ODT_NEVER, + FSL_DDR_ODT_CS_AND_OTHER_DIMM, + DDR4_RTT_34_OHM, + DDR4_RTT_120_OHM + }, + { /* cs3 */ + FSL_DDR_ODT_NEVER, + FSL_DDR_ODT_NEVER, /* tied high */ + DDR4_RTT_OFF, + DDR4_RTT_120_OHM + } +}; + +static const struct dynamic_odt single_D_ddr4[4] = { + { /* cs0 */ + FSL_DDR_ODT_NEVER, + FSL_DDR_ODT_ALL, + DDR4_RTT_40_OHM, + DDR4_RTT_OFF + }, + { /* cs1 */ + FSL_DDR_ODT_NEVER, + FSL_DDR_ODT_NEVER, + DDR4_RTT_OFF, + DDR4_RTT_OFF + }, + {0, 0, 0, 0}, + {0, 0, 0, 0} +}; + +static const struct dynamic_odt single_S_ddr4[4] = { + { /* cs0 */ + FSL_DDR_ODT_NEVER, + FSL_DDR_ODT_ALL, + DDR4_RTT_40_OHM, + DDR4_RTT_OFF + }, + {0, 0, 0, 0}, + {0, 0, 0, 0}, + {0, 0, 0, 0}, +}; + +static const struct dynamic_odt dual_DD_ddr4[4] = { + { /* cs0 */ + FSL_DDR_ODT_NEVER, + FSL_DDR_ODT_SAME_DIMM, + DDR4_RTT_120_OHM, + DDR4_RTT_OFF + }, + { /* cs1 */ + FSL_DDR_ODT_OTHER_DIMM, + FSL_DDR_ODT_OTHER_DIMM, + DDR4_RTT_34_OHM, + DDR4_RTT_OFF + }, + { /* cs2 */ + FSL_DDR_ODT_NEVER, + FSL_DDR_ODT_SAME_DIMM, + DDR4_RTT_120_OHM, + DDR4_RTT_OFF + }, + { /* cs3 */ + FSL_DDR_ODT_OTHER_DIMM, + FSL_DDR_ODT_OTHER_DIMM, + DDR4_RTT_34_OHM, + DDR4_RTT_OFF + } +}; + +static const struct dynamic_odt dual_DS_ddr4[4] = { + { /* cs0 */ + FSL_DDR_ODT_NEVER, + FSL_DDR_ODT_SAME_DIMM, + DDR4_RTT_120_OHM, + DDR4_RTT_OFF + }, + { /* cs1 */ + FSL_DDR_ODT_OTHER_DIMM, + FSL_DDR_ODT_OTHER_DIMM, + DDR4_RTT_34_OHM, + DDR4_RTT_OFF + }, + { /* cs2 */ + FSL_DDR_ODT_OTHER_DIMM, + FSL_DDR_ODT_ALL, + DDR4_RTT_34_OHM, + DDR4_RTT_120_OHM + }, + {0, 0, 0, 0} +}; +static const struct dynamic_odt dual_SD_ddr4[4] = { + { /* cs0 */ + FSL_DDR_ODT_OTHER_DIMM, + FSL_DDR_ODT_ALL, + DDR4_RTT_34_OHM, + DDR4_RTT_120_OHM + }, + {0, 0, 0, 0}, + { /* cs2 */ + FSL_DDR_ODT_NEVER, + FSL_DDR_ODT_SAME_DIMM, + DDR4_RTT_120_OHM, + DDR4_RTT_OFF + }, + { /* cs3 */ + FSL_DDR_ODT_OTHER_DIMM, + FSL_DDR_ODT_OTHER_DIMM, + DDR4_RTT_34_OHM, + DDR4_RTT_OFF + } +}; + +static const struct dynamic_odt dual_SS_ddr4[4] = { + { /* cs0 */ + FSL_DDR_ODT_OTHER_DIMM, + FSL_DDR_ODT_ALL, + DDR4_RTT_34_OHM, + DDR4_RTT_120_OHM + }, + {0, 0, 0, 0}, + { /* cs2 */ + FSL_DDR_ODT_OTHER_DIMM, + FSL_DDR_ODT_ALL, + DDR4_RTT_34_OHM, + DDR4_RTT_120_OHM + }, + {0, 0, 0, 0} +}; + +static const struct dynamic_odt dual_D0_ddr4[4] = { + { /* cs0 */ + FSL_DDR_ODT_NEVER, + FSL_DDR_ODT_SAME_DIMM, + DDR4_RTT_40_OHM, + DDR4_RTT_OFF + }, + { /* cs1 */ + FSL_DDR_ODT_NEVER, + FSL_DDR_ODT_NEVER, + DDR4_RTT_OFF, + DDR4_RTT_OFF + }, + {0, 0, 0, 0}, + {0, 0, 0, 0} +}; + +static const struct dynamic_odt dual_0D_ddr4[4] = { + {0, 0, 0, 0}, + {0, 0, 0, 0}, + { /* cs2 */ + FSL_DDR_ODT_NEVER, + FSL_DDR_ODT_SAME_DIMM, + DDR4_RTT_40_OHM, + DDR4_RTT_OFF + }, + { /* cs3 */ + FSL_DDR_ODT_NEVER, + FSL_DDR_ODT_NEVER, + DDR4_RTT_OFF, + DDR4_RTT_OFF + } +}; + +static const struct dynamic_odt dual_S0_ddr4[4] = { + { /* cs0 */ + FSL_DDR_ODT_NEVER, + FSL_DDR_ODT_CS, + DDR4_RTT_40_OHM, + DDR4_RTT_OFF + }, + {0, 0, 0, 0}, + {0, 0, 0, 0}, + {0, 0, 0, 0} + +}; + +static const struct dynamic_odt dual_0S_ddr4[4] = { + {0, 0, 0, 0}, + {0, 0, 0, 0}, + { /* cs2 */ + FSL_DDR_ODT_NEVER, + FSL_DDR_ODT_CS, + DDR4_RTT_40_OHM, + DDR4_RTT_OFF + }, + {0, 0, 0, 0} + +}; + +static const struct dynamic_odt odt_unknown_ddr4[4] = { + { /* cs0 */ + FSL_DDR_ODT_NEVER, + FSL_DDR_ODT_CS, + DDR4_RTT_120_OHM, + DDR4_RTT_OFF + }, + { /* cs1 */ + FSL_DDR_ODT_NEVER, + FSL_DDR_ODT_CS, + DDR4_RTT_120_OHM, + DDR4_RTT_OFF + }, + { /* cs2 */ + FSL_DDR_ODT_NEVER, + FSL_DDR_ODT_CS, + DDR4_RTT_120_OHM, + DDR4_RTT_OFF + }, + { /* cs3 */ + FSL_DDR_ODT_NEVER, + FSL_DDR_ODT_CS, + DDR4_RTT_120_OHM, + DDR4_RTT_OFF + } +}; + +static const struct dynamic_odt single_Q_ddr3[4] = { + { /* cs0 */ + FSL_DDR_ODT_NEVER, + FSL_DDR_ODT_CS_AND_OTHER_DIMM, + DDR3_RTT_20_OHM, + DDR3_RTT_120_OHM + }, + { /* cs1 */ + FSL_DDR_ODT_NEVER, + FSL_DDR_ODT_NEVER, /* tied high */ + DDR3_RTT_OFF, + DDR3_RTT_120_OHM + }, + { /* cs2 */ + FSL_DDR_ODT_NEVER, + FSL_DDR_ODT_CS_AND_OTHER_DIMM, + DDR3_RTT_20_OHM, + DDR3_RTT_120_OHM + }, + { /* cs3 */ + FSL_DDR_ODT_NEVER, + FSL_DDR_ODT_NEVER, /* tied high */ + DDR3_RTT_OFF, + DDR3_RTT_120_OHM + } +}; + +static const struct dynamic_odt single_D_ddr3[4] = { + { /* cs0 */ + FSL_DDR_ODT_NEVER, + FSL_DDR_ODT_ALL, + DDR3_RTT_40_OHM, + DDR3_RTT_OFF + }, + { /* cs1 */ + FSL_DDR_ODT_NEVER, + FSL_DDR_ODT_NEVER, + DDR3_RTT_OFF, + DDR3_RTT_OFF + }, + {0, 0, 0, 0}, + {0, 0, 0, 0} +}; + +static const struct dynamic_odt single_S_ddr3[4] = { + { /* cs0 */ + FSL_DDR_ODT_NEVER, + FSL_DDR_ODT_ALL, + DDR3_RTT_40_OHM, + DDR3_RTT_OFF + }, + {0, 0, 0, 0}, + {0, 0, 0, 0}, + {0, 0, 0, 0}, +}; + +static const struct dynamic_odt dual_DD_ddr3[4] = { + { /* cs0 */ + FSL_DDR_ODT_NEVER, + FSL_DDR_ODT_SAME_DIMM, + DDR3_RTT_120_OHM, + DDR3_RTT_OFF + }, + { /* cs1 */ + FSL_DDR_ODT_OTHER_DIMM, + FSL_DDR_ODT_OTHER_DIMM, + DDR3_RTT_30_OHM, + DDR3_RTT_OFF + }, + { /* cs2 */ + FSL_DDR_ODT_NEVER, + FSL_DDR_ODT_SAME_DIMM, + DDR3_RTT_120_OHM, + DDR3_RTT_OFF + }, + { /* cs3 */ + FSL_DDR_ODT_OTHER_DIMM, + FSL_DDR_ODT_OTHER_DIMM, + DDR3_RTT_30_OHM, + DDR3_RTT_OFF + } +}; + +static const struct dynamic_odt dual_DS_ddr3[4] = { + { /* cs0 */ + FSL_DDR_ODT_NEVER, + FSL_DDR_ODT_SAME_DIMM, + DDR3_RTT_120_OHM, + DDR3_RTT_OFF + }, + { /* cs1 */ + FSL_DDR_ODT_OTHER_DIMM, + FSL_DDR_ODT_OTHER_DIMM, + DDR3_RTT_30_OHM, + DDR3_RTT_OFF + }, + { /* cs2 */ + FSL_DDR_ODT_OTHER_DIMM, + FSL_DDR_ODT_ALL, + DDR3_RTT_20_OHM, + DDR3_RTT_120_OHM + }, + {0, 0, 0, 0} +}; +static const struct dynamic_odt dual_SD_ddr3[4] = { + { /* cs0 */ + FSL_DDR_ODT_OTHER_DIMM, + FSL_DDR_ODT_ALL, + DDR3_RTT_20_OHM, + DDR3_RTT_120_OHM + }, + {0, 0, 0, 0}, + { /* cs2 */ + FSL_DDR_ODT_NEVER, + FSL_DDR_ODT_SAME_DIMM, + DDR3_RTT_120_OHM, + DDR3_RTT_OFF + }, + { /* cs3 */ + FSL_DDR_ODT_OTHER_DIMM, + FSL_DDR_ODT_OTHER_DIMM, + DDR3_RTT_20_OHM, + DDR3_RTT_OFF + } +}; + +static const struct dynamic_odt dual_SS_ddr3[4] = { + { /* cs0 */ + FSL_DDR_ODT_OTHER_DIMM, + FSL_DDR_ODT_ALL, + DDR3_RTT_30_OHM, + DDR3_RTT_120_OHM + }, + {0, 0, 0, 0}, + { /* cs2 */ + FSL_DDR_ODT_OTHER_DIMM, + FSL_DDR_ODT_ALL, + DDR3_RTT_30_OHM, + DDR3_RTT_120_OHM + }, + {0, 0, 0, 0} +}; + +static const struct dynamic_odt dual_D0_ddr3[4] = { + { /* cs0 */ + FSL_DDR_ODT_NEVER, + FSL_DDR_ODT_SAME_DIMM, + DDR3_RTT_40_OHM, + DDR3_RTT_OFF + }, + { /* cs1 */ + FSL_DDR_ODT_NEVER, + FSL_DDR_ODT_NEVER, + DDR3_RTT_OFF, + DDR3_RTT_OFF + }, + {0, 0, 0, 0}, + {0, 0, 0, 0} +}; + +static const struct dynamic_odt dual_0D_ddr3[4] = { + {0, 0, 0, 0}, + {0, 0, 0, 0}, + { /* cs2 */ + FSL_DDR_ODT_NEVER, + FSL_DDR_ODT_SAME_DIMM, + DDR3_RTT_40_OHM, + DDR3_RTT_OFF + }, + { /* cs3 */ + FSL_DDR_ODT_NEVER, + FSL_DDR_ODT_NEVER, + DDR3_RTT_OFF, + DDR3_RTT_OFF + } +}; + +static const struct dynamic_odt dual_S0_ddr3[4] = { + { /* cs0 */ + FSL_DDR_ODT_NEVER, + FSL_DDR_ODT_CS, + DDR3_RTT_40_OHM, + DDR3_RTT_OFF + }, + {0, 0, 0, 0}, + {0, 0, 0, 0}, + {0, 0, 0, 0} + +}; + +static const struct dynamic_odt dual_0S_ddr3[4] = { + {0, 0, 0, 0}, + {0, 0, 0, 0}, + { /* cs2 */ + FSL_DDR_ODT_NEVER, + FSL_DDR_ODT_CS, + DDR3_RTT_40_OHM, + DDR3_RTT_OFF + }, + {0, 0, 0, 0} + +}; + +static const struct dynamic_odt odt_unknown_ddr3[4] = { + { /* cs0 */ + FSL_DDR_ODT_NEVER, + FSL_DDR_ODT_CS, + DDR3_RTT_120_OHM, + DDR3_RTT_OFF + }, + { /* cs1 */ + FSL_DDR_ODT_NEVER, + FSL_DDR_ODT_CS, + DDR3_RTT_120_OHM, + DDR3_RTT_OFF + }, + { /* cs2 */ + FSL_DDR_ODT_NEVER, + FSL_DDR_ODT_CS, + DDR3_RTT_120_OHM, + DDR3_RTT_OFF + }, + { /* cs3 */ + FSL_DDR_ODT_NEVER, + FSL_DDR_ODT_CS, + DDR3_RTT_120_OHM, + DDR3_RTT_OFF + } +}; + +static const struct dynamic_odt single_Q_ddr12[4] = { + {0, 0, 0, 0}, + {0, 0, 0, 0}, + {0, 0, 0, 0}, + {0, 0, 0, 0} +}; + +static const struct dynamic_odt single_D_ddr12[4] = { + { /* cs0 */ + FSL_DDR_ODT_NEVER, + FSL_DDR_ODT_ALL, + DDR2_RTT_150_OHM, + DDR2_RTT_OFF + }, + { /* cs1 */ + FSL_DDR_ODT_NEVER, + FSL_DDR_ODT_NEVER, + DDR2_RTT_OFF, + DDR2_RTT_OFF + }, + {0, 0, 0, 0}, + {0, 0, 0, 0} +}; + +static const struct dynamic_odt single_S_ddr12[4] = { + { /* cs0 */ + FSL_DDR_ODT_NEVER, + FSL_DDR_ODT_ALL, + DDR2_RTT_150_OHM, + DDR2_RTT_OFF + }, + {0, 0, 0, 0}, + {0, 0, 0, 0}, + {0, 0, 0, 0}, +}; + +static const struct dynamic_odt dual_DD_ddr12[4] = { + { /* cs0 */ + FSL_DDR_ODT_OTHER_DIMM, + FSL_DDR_ODT_OTHER_DIMM, + DDR2_RTT_75_OHM, + DDR2_RTT_OFF + }, + { /* cs1 */ + FSL_DDR_ODT_NEVER, + FSL_DDR_ODT_NEVER, + DDR2_RTT_OFF, + DDR2_RTT_OFF + }, + { /* cs2 */ + FSL_DDR_ODT_OTHER_DIMM, + FSL_DDR_ODT_OTHER_DIMM, + DDR2_RTT_75_OHM, + DDR2_RTT_OFF + }, + { /* cs3 */ + FSL_DDR_ODT_NEVER, + FSL_DDR_ODT_NEVER, + DDR2_RTT_OFF, + DDR2_RTT_OFF + } +}; + +static const struct dynamic_odt dual_DS_ddr12[4] = { + { /* cs0 */ + FSL_DDR_ODT_OTHER_DIMM, + FSL_DDR_ODT_OTHER_DIMM, + DDR2_RTT_75_OHM, + DDR2_RTT_OFF + }, + { /* cs1 */ + FSL_DDR_ODT_NEVER, + FSL_DDR_ODT_NEVER, + DDR2_RTT_OFF, + DDR2_RTT_OFF + }, + { /* cs2 */ + FSL_DDR_ODT_OTHER_DIMM, + FSL_DDR_ODT_OTHER_DIMM, + DDR2_RTT_75_OHM, + DDR2_RTT_OFF + }, + {0, 0, 0, 0} +}; + +static const struct dynamic_odt dual_SD_ddr12[4] = { + { /* cs0 */ + FSL_DDR_ODT_OTHER_DIMM, + FSL_DDR_ODT_OTHER_DIMM, + DDR2_RTT_75_OHM, + DDR2_RTT_OFF + }, + {0, 0, 0, 0}, + { /* cs2 */ + FSL_DDR_ODT_OTHER_DIMM, + FSL_DDR_ODT_OTHER_DIMM, + DDR2_RTT_75_OHM, + DDR2_RTT_OFF + }, + { /* cs3 */ + FSL_DDR_ODT_NEVER, + FSL_DDR_ODT_NEVER, + DDR2_RTT_OFF, + DDR2_RTT_OFF + } +}; + +static const struct dynamic_odt dual_SS_ddr12[4] = { + { /* cs0 */ + FSL_DDR_ODT_OTHER_DIMM, + FSL_DDR_ODT_OTHER_DIMM, + DDR2_RTT_75_OHM, + DDR2_RTT_OFF + }, + {0, 0, 0, 0}, + { /* cs2 */ + FSL_DDR_ODT_OTHER_DIMM, + FSL_DDR_ODT_OTHER_DIMM, + DDR2_RTT_75_OHM, + DDR2_RTT_OFF + }, + {0, 0, 0, 0} +}; + +static const struct dynamic_odt dual_D0_ddr12[4] = { + { /* cs0 */ + FSL_DDR_ODT_NEVER, + FSL_DDR_ODT_ALL, + DDR2_RTT_150_OHM, + DDR2_RTT_OFF + }, + { /* cs1 */ + FSL_DDR_ODT_NEVER, + FSL_DDR_ODT_NEVER, + DDR2_RTT_OFF, + DDR2_RTT_OFF + }, + {0, 0, 0, 0}, + {0, 0, 0, 0} +}; + +static const struct dynamic_odt dual_0D_ddr12[4] = { + {0, 0, 0, 0}, + {0, 0, 0, 0}, + { /* cs2 */ + FSL_DDR_ODT_NEVER, + FSL_DDR_ODT_ALL, + DDR2_RTT_150_OHM, + DDR2_RTT_OFF + }, + { /* cs3 */ + FSL_DDR_ODT_NEVER, + FSL_DDR_ODT_NEVER, + DDR2_RTT_OFF, + DDR2_RTT_OFF + } +}; + +static const struct dynamic_odt dual_S0_ddr12[4] = { + { /* cs0 */ + FSL_DDR_ODT_NEVER, + FSL_DDR_ODT_CS, + DDR2_RTT_150_OHM, + DDR2_RTT_OFF + }, + {0, 0, 0, 0}, + {0, 0, 0, 0}, + {0, 0, 0, 0} + +}; + +static const struct dynamic_odt dual_0S_ddr12[4] = { + {0, 0, 0, 0}, + {0, 0, 0, 0}, + { /* cs2 */ + FSL_DDR_ODT_NEVER, + FSL_DDR_ODT_CS, + DDR2_RTT_150_OHM, + DDR2_RTT_OFF + }, + {0, 0, 0, 0} + +}; + +static const struct dynamic_odt odt_unknown_ddr12[4] = { + { /* cs0 */ + FSL_DDR_ODT_NEVER, + FSL_DDR_ODT_CS, + DDR2_RTT_75_OHM, + DDR2_RTT_OFF + }, + { /* cs1 */ + FSL_DDR_ODT_NEVER, + FSL_DDR_ODT_NEVER, + DDR2_RTT_OFF, + DDR2_RTT_OFF + }, + { /* cs2 */ + FSL_DDR_ODT_NEVER, + FSL_DDR_ODT_CS, + DDR2_RTT_75_OHM, + DDR2_RTT_OFF + }, + { /* cs3 */ + FSL_DDR_ODT_NEVER, + FSL_DDR_ODT_NEVER, + DDR2_RTT_OFF, + DDR2_RTT_OFF + } +}; + +/* + * Automatically seleect bank interleaving mode based on DIMMs + * in this order: cs0_cs1_cs2_cs3, cs0_cs1, null. + * This function only deal with one or two slots per controller. + */ +static inline unsigned int auto_bank_intlv(struct fsl_ddr_controller *c, + struct dimm_params *pdimm) +{ + if (c->dimm_slots_per_ctrl == 1) { + if (pdimm[0].n_ranks == 4) + return FSL_DDR_CS0_CS1_CS2_CS3; + else if (pdimm[0].n_ranks == 2) + return FSL_DDR_CS0_CS1; + } + + if (c->dimm_slots_per_ctrl == 2) { + if (pdimm[0].n_ranks == 2) { + if (pdimm[1].n_ranks == 2) + return FSL_DDR_CS0_CS1_CS2_CS3; + else + return FSL_DDR_CS0_CS1; + } + } + + return 0; +} + +unsigned int populate_memctl_options(struct fsl_ddr_controller *c) +{ + const struct common_timing_params *common_dimm = &c->common_timing_params; + memctl_options_t *popts = &c->memctl_opts; + struct dimm_params *pdimm = c->dimm_params; + unsigned int i; + const struct dynamic_odt *pdodt; + const struct dynamic_odt *single_Q, *single_S, *single_D; + const struct dynamic_odt *dual_DD, *dual_DS, *dual_0S; + const struct dynamic_odt *dual_D0, *dual_SD, *dual_SS, *dual_S0, *dual_0D; + + if (is_ddr1(popts) || is_ddr2(popts)) { + pdodt = odt_unknown_ddr12; + single_Q = single_Q_ddr12; + single_D = single_D_ddr12; + single_S = single_S_ddr12; + dual_DD = dual_DD_ddr12; + dual_DS = dual_DS_ddr12; + dual_0S = dual_0S_ddr12; + dual_D0 = dual_D0_ddr12; + dual_SD = dual_SD_ddr12; + dual_SS = dual_SS_ddr12; + dual_S0 = dual_S0_ddr12; + dual_0D = dual_0D_ddr12; + } else if (is_ddr3(popts)) { + pdodt = odt_unknown_ddr3; + single_Q = single_Q_ddr3; + single_D = single_D_ddr3; + single_S = single_S_ddr3; + dual_DD = dual_DD_ddr3; + dual_DS = dual_DS_ddr3; + dual_0S = dual_0S_ddr3; + dual_D0 = dual_D0_ddr3; + dual_SD = dual_SD_ddr3; + dual_SS = dual_SS_ddr3; + dual_S0 = dual_S0_ddr3; + dual_0D = dual_0D_ddr3; + } else if (is_ddr4(popts)) { + pdodt = odt_unknown_ddr4; + single_Q = single_Q_ddr4; + single_D = single_D_ddr4; + single_S = single_S_ddr4; + dual_DD = dual_DD_ddr4; + dual_DS = dual_DS_ddr4; + dual_0S = dual_0S_ddr4; + dual_D0 = dual_D0_ddr4; + dual_SD = dual_SD_ddr4; + dual_SS = dual_SS_ddr4; + dual_S0 = dual_S0_ddr4; + dual_0D = dual_0D_ddr4; + } else { + return -EINVAL; + } + + if (!is_ddr1(popts)) { + /* Chip select options. */ + if (c->dimm_slots_per_ctrl == 1) { + switch (pdimm[0].n_ranks) { + case 1: + pdodt = single_S; + break; + case 2: + pdodt = single_D; + break; + case 4: + pdodt = single_Q; + break; + } + } else if (c->dimm_slots_per_ctrl == 2) { + switch (pdimm[0].n_ranks) { + case 4: + pdodt = single_Q; + if (pdimm[1].n_ranks) + printf("Error: Quad- and Dual-rank DIMMs cannot be used together\n"); + break; + case 2: + switch (pdimm[1].n_ranks) { + case 2: + pdodt = dual_DD; + break; + case 1: + pdodt = dual_DS; + break; + case 0: + pdodt = dual_D0; + break; + } + break; + case 1: + switch (pdimm[1].n_ranks) { + case 2: + pdodt = dual_SD; + break; + case 1: + pdodt = dual_SS; + break; + case 0: + pdodt = dual_S0; + break; + } + break; + case 0: + switch (pdimm[1].n_ranks) { + case 2: + pdodt = dual_0D; + break; + case 1: + pdodt = dual_0S; + break; + } + break; + } + } + } + + /* Pick chip-select local options. */ + for (i = 0; i < c->chip_selects_per_ctrl; i++) { + if (is_ddr1(popts)) { + popts->cs_local_opts[i].odt_rd_cfg = FSL_DDR_ODT_NEVER; + popts->cs_local_opts[i].odt_wr_cfg = FSL_DDR_ODT_CS; + } else { + popts->cs_local_opts[i].odt_rd_cfg = pdodt[i].odt_rd_cfg; + popts->cs_local_opts[i].odt_wr_cfg = pdodt[i].odt_wr_cfg; + popts->cs_local_opts[i].odt_rtt_norm = pdodt[i].odt_rtt_norm; + popts->cs_local_opts[i].odt_rtt_wr = pdodt[i].odt_rtt_wr; + } + popts->cs_local_opts[i].auto_precharge = 0; + } + + /* Pick interleaving mode. */ + + /* + * 0 = no interleaving + * 1 = interleaving between 2 controllers + */ + popts->memctl_interleaving = 0; + + /* + * 0 = cacheline + * 1 = page + * 2 = (logical) bank + * 3 = superbank (only if CS interleaving is enabled) + */ + popts->memctl_interleaving_mode = 0; + + /* + * 0: cacheline: bit 30 of the 36-bit physical addr selects the memctl + * 1: page: bit to the left of the column bits selects the memctl + * 2: bank: bit to the left of the bank bits selects the memctl + * 3: superbank: bit to the left of the chip select selects the memctl + * + * NOTE: ba_intlv (rank interleaving) is independent of memory + * controller interleaving; it is only within a memory controller. + * Must use superbank interleaving if rank interleaving is used and + * memory controller interleaving is enabled. + */ + + /* + * 0 = no + * 0x40 = CS0,CS1 + * 0x20 = CS2,CS3 + * 0x60 = CS0,CS1 + CS2,CS3 + * 0x04 = CS0,CS1,CS2,CS3 + */ + popts->ba_intlv_ctl = 0; + + /* Memory Organization Parameters */ + popts->registered_dimm_en = common_dimm->all_dimms_registered; + + /* + * Choose DQS config + * 0 for DDR1 + * 1 for DDR2 + */ + if (is_ddr2(popts) || is_ddr3(popts)) + popts->dqs_config = 1; + + /* Choose self-refresh during sleep. */ + popts->self_refresh_in_sleep = 1; + + /* Choose dynamic power management mode. */ + popts->dynamic_power = 0; + + popts->x4_en = (pdimm[0].device_width == 4) ? 1 : 0; + + /* Choose ddr controller address mirror mode */ + if (is_ddr3_4(popts)) { + if (pdimm[0].n_ranks != 0) { + if (pdimm[0].primary_sdram_width == 64) + popts->data_bus_width = 0; + else if (pdimm[0].primary_sdram_width == 32) + popts->data_bus_width = 1; + else if (pdimm[0].primary_sdram_width == 16) + popts->data_bus_width = 2; + else { + panic("Error: primary sdram width %u is invalid!\n", + pdimm[0].primary_sdram_width); + } + } + + if ((popts->data_bus_width == 1) || (popts->data_bus_width == 2)) { + /* 32-bit or 16-bit bus */ + popts->otf_burst_chop_en = 0; + popts->burst_length = DDR_BL8; + } else { + popts->otf_burst_chop_en = 1; /* on-the-fly burst chop */ + popts->burst_length = DDR_OTF; /* on-the-fly BC4 and BL8 */ + } + + for (i = 0; i < c->dimm_slots_per_ctrl; i++) { + if (pdimm[i].n_ranks) { + popts->mirrored_dimm = pdimm[i].mirrored_dimm; + break; + } + } + } else { + if (pdimm[0].n_ranks != 0) { + if ((pdimm[0].data_width >= 64) && \ + (pdimm[0].data_width <= 72)) + popts->data_bus_width = 0; + else if ((pdimm[0].data_width >= 32) && \ + (pdimm[0].data_width <= 40)) + popts->data_bus_width = 1; + else { + panic("Error: data width %u is invalid!\n", + pdimm[0].data_width); + } + } + + popts->burst_length = DDR_BL4; /* has to be 4 for DDR2 */ + } + + + /* Global Timing Parameters. */ + debug("mclk_ps = %u ps\n", get_memory_clk_period_ps(c)); + + /* Pick a caslat override. */ + popts->cas_latency_override = 0; + popts->cas_latency_override_value = 3; + if (popts->cas_latency_override) { + debug("using caslat override value = %u\n", + popts->cas_latency_override_value); + } + + /* Decide whether to use the computed derated latency */ + popts->use_derated_caslat = 0; + + /* Choose an additive latency. */ + popts->additive_latency_override = 0; + popts->additive_latency_override_value = 3; + if (popts->additive_latency_override) { + debug("using additive latency override value = %u\n", + popts->additive_latency_override_value); + } + + /* + * 2T_EN setting + * + * Factors to consider for 2T_EN: + * - number of DIMMs installed + * - number of components, number of active ranks + * - how much time you want to spend playing around + */ + popts->twot_en = 0; + popts->threet_en = 0; + + /* for RDIMM and DDR4 UDIMM/discrete memory, address parity enable */ + if (popts->registered_dimm_en) + popts->ap_en = 1; /* 0 = disable, 1 = enable */ + else + popts->ap_en = 0; /* disabled for DDR4 UDIMM/discrete default */ + + /* + * BSTTOPRE precharge interval + * + * Set this to 0 for global auto precharge + * The value of 0x100 has been used for DDR1, DDR2, DDR3. + * It is not wrong. Any value should be OK. The performance depends on + * applications. There is no one good value for all. One way to set + * is to use 1/4 of refint value. + */ + popts->bstopre = picos_to_mclk(c, common_dimm->refresh_rate_ps) + >> 2; + + /* + * Window for four activates -- tFAW + * + * FIXME: UM: applies only to DDR2/DDR3 with eight logical banks only + * FIXME: varies depending upon number of column addresses or data + * FIXME: width, was considering looking at pdimm->primary_sdram_width + */ + if (is_ddr1(popts)) + popts->tfaw_window_four_activates_ps = mclk_to_picos(c, 1); + else if (is_ddr2(popts)) + /* + * x4/x8; some datasheets have 35000 + * x16 wide columns only? Use 50000? + */ + popts->tfaw_window_four_activates_ps = 37500; + else + popts->tfaw_window_four_activates_ps = pdimm[0].tfaw_ps; + + popts->zq_en = 0; + popts->wrlvl_en = 0; + + if (is_ddr3_4(popts)) { + /* + * due to ddr3 dimm is fly-by topology + * we suggest to enable write leveling to + * meet the tQDSS under different loading. + */ + popts->wrlvl_en = 1; + popts->zq_en = 1; + popts->wrlvl_override = 0; + } + + if (pdimm[0].n_ranks == 4) + popts->quad_rank_present = 1; + + popts->package_3ds = pdimm->package_3ds; + + if (!is_ddr4(popts)) { + ulong ddr_freq = c->ddr_freq / 1000000; + if (popts->registered_dimm_en) { + popts->rcw_override = 1; + popts->rcw_1 = 0x000a5a00; + if (ddr_freq <= 800) + popts->rcw_2 = 0x00000000; + else if (ddr_freq <= 1066) + popts->rcw_2 = 0x00100000; + else if (ddr_freq <= 1333) + popts->rcw_2 = 0x00200000; + else + popts->rcw_2 = 0x00300000; + } + } + + if (c->board_options) + c->board_options(popts, pdimm, c); + + return 0; +} + +void check_interleaving_options(struct fsl_ddr_info *pinfo) +{ + int i, j, k, check_n_ranks, intlv_invalid = 0; + unsigned int check_intlv, check_n_row_addr, check_n_col_addr; + unsigned long long check_rank_density; + struct dimm_params *dimm; + + /* + * Check if all controllers are configured for memory + * controller interleaving. Identical dimms are recommended. At least + * the size, row and col address should be checked. + */ + j = 0; + check_n_ranks = pinfo->c[0].dimm_params[0].n_ranks; + check_rank_density = pinfo->c[0].dimm_params[0].rank_density; + check_n_row_addr = pinfo->c[0].dimm_params[0].n_row_addr; + check_n_col_addr = pinfo->c[0].dimm_params[0].n_col_addr; + check_intlv = pinfo->c[0].memctl_opts.memctl_interleaving_mode; + for (i = 0; i < pinfo->num_ctrls; i++) { + dimm = &pinfo->c[i].dimm_params[0]; + if (!pinfo->c[i].memctl_opts.memctl_interleaving) { + continue; + } else if (((check_rank_density != dimm->rank_density) || + (check_n_ranks != dimm->n_ranks) || + (check_n_row_addr != dimm->n_row_addr) || + (check_n_col_addr != dimm->n_col_addr) || + (check_intlv != + pinfo->c[i].memctl_opts.memctl_interleaving_mode))){ + intlv_invalid = 1; + break; + } else { + j++; + } + + } + if (intlv_invalid) { + for (i = 0; i < pinfo->num_ctrls; i++) + pinfo->c[i].memctl_opts.memctl_interleaving = 0; + printf("Not all DIMMs are identical. " + "Memory controller interleaving disabled.\n"); + } else { + switch (check_intlv) { + case FSL_DDR_256B_INTERLEAVING: + case FSL_DDR_CACHE_LINE_INTERLEAVING: + case FSL_DDR_PAGE_INTERLEAVING: + case FSL_DDR_BANK_INTERLEAVING: + case FSL_DDR_SUPERBANK_INTERLEAVING: + if (pinfo->num_ctrls == 3) + k = 2; + else + k = pinfo->num_ctrls; + break; + case FSL_DDR_3WAY_1KB_INTERLEAVING: + case FSL_DDR_3WAY_4KB_INTERLEAVING: + case FSL_DDR_3WAY_8KB_INTERLEAVING: + case FSL_DDR_4WAY_1KB_INTERLEAVING: + case FSL_DDR_4WAY_4KB_INTERLEAVING: + case FSL_DDR_4WAY_8KB_INTERLEAVING: + default: + k = pinfo->num_ctrls; + break; + } + debug("%d of %d controllers are interleaving.\n", j, k); + if (j && (j != k)) { + for (i = 0; i < pinfo->num_ctrls; i++) + pinfo->c[i].memctl_opts.memctl_interleaving = 0; + if (pinfo->num_ctrls > 1) + printf("Not all controllers have compatible interleaving mode. All disabled.\n"); + } + } + debug("Checking interleaving options completed\n"); +} diff --git a/drivers/ddr/fsl/util.c b/drivers/ddr/fsl/util.c new file mode 100644 index 0000000000..977d22dcaa --- /dev/null +++ b/drivers/ddr/fsl/util.c @@ -0,0 +1,98 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright 2008-2014 Freescale Semiconductor, Inc. + */ + +#include <common.h> +#include <soc/fsl/fsl_ddr_sdram.h> +#include <soc/fsl/fsl_immap.h> +#include <io.h> +#include <soc/fsl/immap_lsch2.h> +#include <asm-generic/div64.h> +#include "fsl_ddr.h" + +/* To avoid 64-bit full-divides, we factor this here */ +#define ULL_2E12 2000000000000ULL +#define UL_5POW12 244140625UL +#define UL_2POW13 (1UL << 13) + +#define ULL_8FS 0xFFFFFFFFULL + +u32 fsl_ddr_get_version(struct fsl_ddr_controller *c) +{ + struct ccsr_ddr __iomem *ddr = c->base; + u32 ver_major_minor_errata; + + ver_major_minor_errata = (ddr_in32(&ddr->ip_rev1) & 0xFFFF) << 8; + ver_major_minor_errata |= (ddr_in32(&ddr->ip_rev2) & 0xFF00) >> 8; + + return ver_major_minor_errata; +} + +/* + * Round up mclk_ps to nearest 1 ps in memory controller code + * if the error is 0.5ps or more. + * + * If an imprecise data rate is too high due to rounding error + * propagation, compute a suitably rounded mclk_ps to compute + * a working memory controller configuration. + */ +unsigned int get_memory_clk_period_ps(struct fsl_ddr_controller *c) +{ + unsigned int data_rate = c->ddr_freq; + unsigned int result; + + /* Round to nearest 10ps, being careful about 64-bit multiply/divide */ + unsigned long long rem, mclk_ps = ULL_2E12; + + /* Now perform the big divide, the result fits in 32-bits */ + rem = do_div(mclk_ps, data_rate); + result = (rem >= (data_rate >> 1)) ? mclk_ps + 1 : mclk_ps; + + return result; +} + +/* Convert picoseconds into DRAM clock cycles (rounding up if needed). */ +unsigned int picos_to_mclk(struct fsl_ddr_controller *c, unsigned int picos) +{ + unsigned long long clks, clks_rem; + unsigned int data_rate = c->ddr_freq; + + /* Short circuit for zero picos */ + if (!picos) + return 0; + + /* First multiply the time by the data rate (32x32 => 64) */ + clks = picos * (unsigned long long)data_rate; + /* + * Now divide by 5^12 and track the 32-bit remainder, then divide + * by 2*(2^12) using shifts (and updating the remainder). + */ + clks_rem = do_div(clks, UL_5POW12); + clks_rem += (clks & (UL_2POW13-1)) * UL_5POW12; + clks >>= 13; + + /* If we had a remainder greater than the 1ps error, then round up */ + if (clks_rem > data_rate) + clks++; + + /* Clamp to the maximum representable value */ + if (clks > ULL_8FS) + clks = ULL_8FS; + return (unsigned int) clks; +} + +unsigned int mclk_to_picos(struct fsl_ddr_controller *c, unsigned int mclk) +{ + return get_memory_clk_period_ps(c) * mclk; +} + +void fsl_ddr_set_intl3r(const unsigned int granule_size) +{ +} + +u32 fsl_ddr_get_intl3r(void) +{ + u32 val = 0; + return val; +} diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig index fc314ec9c6..0bd8be04e1 100644 --- a/drivers/i2c/Kconfig +++ b/drivers/i2c/Kconfig @@ -3,8 +3,8 @@ menuconfig I2C if I2C -source drivers/i2c/algos/Kconfig -source drivers/i2c/busses/Kconfig +source "drivers/i2c/algos/Kconfig" +source "drivers/i2c/busses/Kconfig" config I2C_MUX tristate "I2C bus multiplexing support" @@ -13,7 +13,7 @@ config I2C_MUX handle multiplexed I2C bus topologies, by presenting each multiplexed segment as a I2C adapter. -source drivers/i2c/muxes/Kconfig +source "drivers/i2c/muxes/Kconfig" endif diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index a25a871809..6d874357b7 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -18,7 +18,7 @@ config I2C_AT91 config I2C_IMX bool "MPC85xx/MPC5200/i.MX I2C Master driver" - depends on (ARCH_IMX && !ARCH_IMX1) || ARCH_MPC85XX || ARCH_MPC5200 + depends on (ARCH_IMX && !ARCH_IMX1) || ARCH_MPC85XX || ARCH_MPC5200 || ARCH_LAYERSCAPE help If you say yes to this option, support will be included for many built-in I2C master controllers found in Freescale SoCs. This is true diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c index 4c7346063c..6911f803b2 100644 --- a/drivers/i2c/busses/i2c-imx.c +++ b/drivers/i2c/busses/i2c-imx.c @@ -47,7 +47,6 @@ #include <io.h> #include <i2c/i2c.h> -#include <mach/clock.h> #include "i2c-imx.h" @@ -276,6 +275,9 @@ static void i2c_fsl_stop(struct i2c_adapter *adapter) } #ifdef CONFIG_PPC + +#include <mach/clock.h> + static void i2c_fsl_set_clk(struct fsl_i2c_struct *i2c_fsl, unsigned int rate) { diff --git a/drivers/mci/imx-esdhc-pbl.c b/drivers/mci/imx-esdhc-pbl.c index 8a03c5fcf4..f7f8c3348d 100644 --- a/drivers/mci/imx-esdhc-pbl.c +++ b/drivers/mci/imx-esdhc-pbl.c @@ -15,11 +15,12 @@ #include <io.h> #include <mci.h> #include <linux/sizes.h> +#include <asm-generic/sections.h> +#include <mach/xload.h> #ifdef CONFIG_ARCH_IMX #include <mach/atf.h> #include <mach/imx6-regs.h> #include <mach/imx8mq-regs.h> -#include <mach/xload.h> #include <mach/imx-header.h> #endif #include "sdhci.h" @@ -406,3 +407,60 @@ int imx8_esdhc_start_image(int instance) MX8MQ_ATF_BL33_BASE_ADDR, SZ_32K); } #endif + +#ifdef CONFIG_ARCH_LS1046 + +/* + * The image on the SD card starts at 0x1000. We reserved 128KiB for the PBL, + * so the 2nd stage image starts here: + */ +#define LS1046A_SD_IMAGE_OFFSET (SZ_4K + SZ_128K) + +/** + * ls1046a_esdhc_start_image - Load and start a 2nd stage from the ESDHC controller + * + * This loads and starts a 2nd stage barebox from an SD card and starts it. We + * assume the image has been generated with scripts/pblimage.c which puts the + * second stage to an offset of 128KiB in the image. + * + * Return: If successful, this function does not return. A negative error + * code is returned when this function fails. + */ +int ls1046a_esdhc_start_image(unsigned long r0, unsigned long r1, unsigned long r2) +{ + int ret; + uint32_t val; + struct esdhc esdhc = { + .regs = IOMEM(0x01560000), + .is_be = true, + }; + unsigned long sdram = 0x80000000; + void (*barebox)(unsigned long, unsigned long, unsigned long) = + (void *)(sdram + LS1046A_SD_IMAGE_OFFSET); + + /* + * The ROM leaves us here with a clock frequency of around 400kHz. Speed + * this up a bit. FIXME: The resulting frequency has not yet been verified + * to work on all cards. + */ + val = esdhc_read32(&esdhc, SDHCI_CLOCK_CONTROL__TIMEOUT_CONTROL__SOFTWARE_RESET); + val &= ~0x0000fff0; + val |= (2 << 8) | (6 << 4); + esdhc_write32(&esdhc, SDHCI_CLOCK_CONTROL__TIMEOUT_CONTROL__SOFTWARE_RESET, val); + + esdhc_write32(&esdhc, ESDHC_DMA_SYSCTL, ESDHC_SYSCTL_DMA_SNOOP); + + ret = esdhc_read_blocks(&esdhc, (void *)sdram, + ALIGN(barebox_image_size + LS1046A_SD_IMAGE_OFFSET, 512)); + if (ret) { + pr_err("%s: reading blocks failed with: %d\n", __func__, ret); + return ret; + } + + printf("Starting barebox\n"); + + barebox(r0, r1, r2); + + return -EINVAL; +} +#endif diff --git a/drivers/mci/imx-esdhc.c b/drivers/mci/imx-esdhc.c index 2fa0974742..f71ca539ed 100644 --- a/drivers/mci/imx-esdhc.c +++ b/drivers/mci/imx-esdhc.c @@ -741,7 +741,8 @@ static struct esdhc_soc_data usdhc_imx6sx_data = { }; static struct esdhc_soc_data esdhc_ls_data = { - .flags = ESDHC_FLAG_MULTIBLK_NO_INT | ESDHC_FLAG_BIGENDIAN, + .flags = ESDHC_FLAG_MULTIBLK_NO_INT | ESDHC_FLAG_BIGENDIAN | + ESDHC_FLAG_CACHE_SNOOPING, }; static __maybe_unused struct of_device_id fsl_esdhc_compatible[] = { diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 1aa096f005..3e3de5a975 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -137,6 +137,14 @@ config DRIVER_NET_FEC_IMX depends on ARCH_HAS_FEC_IMX select PHYLIB +config DRIVER_NET_FSL_FMAN + bool "Freescale fman ethernet driver" + select PHYLIB + select FSL_QE_FIRMWARE + help + This option enabled support for the Freescale fman core found + on Layerscape SoCs. + config DRIVER_NET_GIANFAR bool "Gianfar Ethernet" depends on ARCH_MPC85XX diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 304bbba02d..6ccd22cc10 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -17,6 +17,7 @@ obj-$(CONFIG_DRIVER_NET_ENC28J60) += enc28j60.o obj-$(CONFIG_DRIVER_NET_EP93XX) += ep93xx.o obj-$(CONFIG_DRIVER_NET_ETHOC) += ethoc.o obj-$(CONFIG_DRIVER_NET_FEC_IMX) += fec_imx.o +obj-$(CONFIG_DRIVER_NET_FSL_FMAN) += fsl-fman.o obj-$(CONFIG_DRIVER_NET_GIANFAR) += gianfar.o obj-$(CONFIG_DRIVER_NET_KS8851_MLL) += ks8851_mll.o obj-$(CONFIG_DRIVER_NET_MACB) += macb.o diff --git a/drivers/net/fsl-fman.c b/drivers/net/fsl-fman.c new file mode 100644 index 0000000000..1a11ca4926 --- /dev/null +++ b/drivers/net/fsl-fman.c @@ -0,0 +1,1333 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2009-2012 Freescale Semiconductor, Inc. + * Dave Liu <daveliu@freescale.com> + */ + +#include <common.h> +#include <io.h> +#include <malloc.h> +#include <net.h> +#include <init.h> +#include <of_net.h> +#include <dma.h> +#include <firmware.h> +#include <soc/fsl/qe.h> +#include <soc/fsl/fsl_fman.h> +#include <soc/fsl/fsl_memac.h> + +/* Port ID */ +#define OH_PORT_ID_BASE 0x01 +#define MAX_NUM_OH_PORT 7 +#define RX_PORT_1G_BASE 0x08 +#define MAX_NUM_RX_PORT_1G 8 +#define RX_PORT_10G_BASE 0x10 +#define RX_PORT_10G_BASE2 0x08 +#define TX_PORT_1G_BASE 0x28 +#define MAX_NUM_TX_PORT_1G 8 +#define TX_PORT_10G_BASE 0x30 +#define TX_PORT_10G_BASE2 0x28 +#define MIIM_TIMEOUT 0xFFFF + +struct fm_muram { + void *base; + void *top; + size_t size; + void *alloc; +}; +#define FM_MURAM_RES_SIZE 0x01000 + +/* Rx/Tx buffer descriptor */ +struct fm_port_bd { + u16 status; + u16 len; + u32 res0; + u16 res1; + u16 buf_ptr_hi; + u32 buf_ptr_lo; +}; + +/* Common BD flags */ +#define BD_LAST 0x0800 + +/* Rx BD status flags */ +#define RxBD_EMPTY 0x8000 +#define RxBD_LAST BD_LAST +#define RxBD_FIRST 0x0400 +#define RxBD_PHYS_ERR 0x0008 +#define RxBD_SIZE_ERR 0x0004 +#define RxBD_ERROR (RxBD_PHYS_ERR | RxBD_SIZE_ERR) + +/* Tx BD status flags */ +#define TxBD_READY 0x8000 +#define TxBD_LAST BD_LAST + +/* Rx/Tx queue descriptor */ +struct fm_port_qd { + u16 gen; + u16 bd_ring_base_hi; + u32 bd_ring_base_lo; + u16 bd_ring_size; + u16 offset_in; + u16 offset_out; + u16 res0; + u32 res1[0x4]; +}; + +/* IM global parameter RAM */ +struct fm_port_global_pram { + u32 mode; /* independent mode register */ + u32 rxqd_ptr; /* Rx queue descriptor pointer */ + u32 txqd_ptr; /* Tx queue descriptor pointer */ + u16 mrblr; /* max Rx buffer length */ + u16 rxqd_bsy_cnt; /* RxQD busy counter, should be cleared */ + u32 res0[0x4]; + struct fm_port_qd rxqd; /* Rx queue descriptor */ + struct fm_port_qd txqd; /* Tx queue descriptor */ + u32 res1[0x28]; +}; + +#define FM_PRAM_SIZE sizeof(struct fm_port_global_pram) +#define FM_PRAM_ALIGN 256 +#define PRAM_MODE_GLOBAL 0x20000000 +#define PRAM_MODE_GRACEFUL_STOP 0x00800000 + +#define FM_FREE_POOL_SIZE 0x20000 /* 128K bytes */ +#define FM_FREE_POOL_ALIGN 256 + +/* Fman ethernet private struct */ +struct fm_eth { + struct fm_bmi_tx_port *tx_port; + struct fm_bmi_rx_port *rx_port; + phy_interface_t enet_if; + struct eth_device edev; + struct device_d *dev; + struct fm_port_global_pram *rx_pram; /* Rx parameter table */ + struct fm_port_global_pram *tx_pram; /* Tx parameter table */ + void *rx_bd_ring; /* Rx BD ring base */ + void *cur_rxbd; /* current Rx BD */ + void *rx_buf; /* Rx buffer base */ + void *tx_bd_ring; /* Tx BD ring base */ + void *cur_txbd; /* current Tx BD */ + struct memac *regs; +}; + +#define RX_BD_RING_SIZE 8 +#define TX_BD_RING_SIZE 8 +#define MAX_RXBUF_LOG2 11 +#define MAX_RXBUF_LEN (1 << MAX_RXBUF_LOG2) + +struct fsl_fman_mdio { + struct mii_bus bus; + struct memac_mdio_controller *regs; +}; + +enum fman_port_type { + FMAN_PORT_TYPE_RX = 0, /* RX Port */ + FMAN_PORT_TYPE_TX, /* TX Port */ +}; + +struct fsl_fman_port { + void *regs; + enum fman_port_type type; + struct fm_bmi_rx_port *rxport; + struct fm_bmi_tx_port *txport; +}; + +static struct fm_eth *to_fm_eth(struct eth_device *edev) +{ + return container_of(edev, struct fm_eth, edev); +} + +static struct fm_muram muram; + +static void *fm_muram_base(void) +{ + return muram.base; +} + +static void *fm_muram_alloc(size_t size, unsigned long align) +{ + void *ret; + unsigned long align_mask; + size_t off; + void *save; + + align_mask = align - 1; + save = muram.alloc; + + off = (unsigned long)save & align_mask; + if (off != 0) + muram.alloc += (align - off); + off = size & align_mask; + if (off != 0) + size += (align - off); + if ((muram.alloc + size) >= muram.top) { + muram.alloc = save; + printf("%s: run out of ram.\n", __func__); + return NULL; + } + + ret = muram.alloc; + muram.alloc += size; + + return ret; +} + +/* + * fm_upload_ucode - Fman microcode upload worker function + * + * This function does the actual uploading of an Fman microcode + * to an Fman. + */ +static int fm_upload_ucode(struct fm_imem *imem, + u32 *ucode, unsigned int size) +{ + unsigned int i; + unsigned int timeout = 1000000; + + /* enable address auto increase */ + out_be32(&imem->iadd, IRAM_IADD_AIE); + /* write microcode to IRAM */ + for (i = 0; i < size / 4; i++) + out_be32(&imem->idata, (be32_to_cpu(ucode[i]))); + + /* verify if the writing is over */ + out_be32(&imem->iadd, 0); + while ((in_be32(&imem->idata) != be32_to_cpu(ucode[0])) && --timeout) + ; + if (!timeout) { + printf("microcode upload timeout\n"); + return -ETIMEDOUT; + } + + /* enable microcode from IRAM */ + out_be32(&imem->iready, IRAM_READY); + + return 0; +} + +static int fman_upload_firmware(struct device_d *dev, struct fm_imem *fm_imem) +{ + int i, size, ret; + const struct qe_firmware *firmware; + + get_builtin_firmware(fsl_fman_ucode_ls1046_r1_0_106_4_18_bin, &firmware, &size); + + ret = qe_validate_firmware(firmware, size); + if (ret) + return ret; + + if (firmware->count != 1) { + dev_err(dev, "Invalid data in firmware header\n"); + return -EINVAL; + } + + /* Loop through each microcode. */ + for (i = 0; i < firmware->count; i++) { + const struct qe_microcode *ucode = &firmware->microcode[i]; + + /* Upload a microcode if it's present */ + if (be32_to_cpu(ucode->code_offset)) { + u32 ucode_size; + u32 *code; + dev_info(dev, "Uploading microcode version %u.%u.%u\n", + ucode->major, ucode->minor, + ucode->revision); + code = (void *)firmware + + be32_to_cpu(ucode->code_offset); + ucode_size = sizeof(u32) * be32_to_cpu(ucode->count); + ret = fm_upload_ucode(fm_imem, code, ucode_size); + if (ret) + return ret; + } + } + + return 0; +} + +static u32 fm_assign_risc(int port_id) +{ + u32 risc_sel, val; + risc_sel = (port_id & 0x1) ? FMFPPRC_RISC2 : FMFPPRC_RISC1; + val = (port_id << FMFPPRC_PORTID_SHIFT) & FMFPPRC_PORTID_MASK; + val |= ((risc_sel << FMFPPRC_ORA_SHIFT) | risc_sel); + + return val; +} + +static void fm_init_fpm(struct fm_fpm *fpm) +{ + int i, port_id; + u32 val; + + setbits_be32(&fpm->fmfpee, FMFPEE_EHM | FMFPEE_UEC | + FMFPEE_CER | FMFPEE_DER); + + /* IM mode, each even port ID to RISC#1, each odd port ID to RISC#2 */ + + /* offline/parser port */ + for (i = 0; i < MAX_NUM_OH_PORT; i++) { + port_id = OH_PORT_ID_BASE + i; + val = fm_assign_risc(port_id); + out_be32(&fpm->fpmprc, val); + } + /* Rx 1G port */ + for (i = 0; i < MAX_NUM_RX_PORT_1G; i++) { + port_id = RX_PORT_1G_BASE + i; + val = fm_assign_risc(port_id); + out_be32(&fpm->fpmprc, val); + } + /* Tx 1G port */ + for (i = 0; i < MAX_NUM_TX_PORT_1G; i++) { + port_id = TX_PORT_1G_BASE + i; + val = fm_assign_risc(port_id); + out_be32(&fpm->fpmprc, val); + } + /* Rx 10G port */ + port_id = RX_PORT_10G_BASE; + val = fm_assign_risc(port_id); + out_be32(&fpm->fpmprc, val); + /* Tx 10G port */ + port_id = TX_PORT_10G_BASE; + val = fm_assign_risc(port_id); + out_be32(&fpm->fpmprc, val); + + /* disable the dispatch limit in IM case */ + out_be32(&fpm->fpmflc, FMFP_FLC_DISP_LIM_NONE); + /* clear events */ + out_be32(&fpm->fmfpee, FMFPEE_CLEAR_EVENT); + + /* clear risc events */ + for (i = 0; i < 4; i++) + out_be32(&fpm->fpmcev[i], 0xffffffff); + + /* clear error */ + out_be32(&fpm->fpmrcr, FMFP_RCR_MDEC | FMFP_RCR_IDEC); +} + +static int fm_init_bmi(struct fm_bmi_common *bmi) +{ + int blk, i, port_id; + u32 val; + size_t offset; + void *base; + + /* alloc free buffer pool in MURAM */ + base = fm_muram_alloc(FM_FREE_POOL_SIZE, FM_FREE_POOL_ALIGN); + if (!base) { + printf("%s: no muram for free buffer pool\n", __func__); + return -ENOMEM; + } + offset = base - fm_muram_base(); + + /* Need 128KB total free buffer pool size */ + val = offset / 256; + blk = FM_FREE_POOL_SIZE / 256; + /* in IM, we must not begin from offset 0 in MURAM */ + val |= ((blk - 1) << FMBM_CFG1_FBPS_SHIFT); + out_be32(&bmi->fmbm_cfg1, val); + + /* disable all BMI interrupt */ + out_be32(&bmi->fmbm_ier, FMBM_IER_DISABLE_ALL); + + /* clear all events */ + out_be32(&bmi->fmbm_ievr, FMBM_IEVR_CLEAR_ALL); + + /* + * set port parameters - FMBM_PP_x + * max tasks 10G Rx/Tx=12, 1G Rx/Tx 4, others is 1 + * max dma 10G Rx/Tx=3, others is 1 + * set port FIFO size - FMBM_PFS_x + * 4KB for all Rx and Tx ports + */ + /* offline/parser port */ + for (i = 0; i < MAX_NUM_OH_PORT; i++) { + port_id = OH_PORT_ID_BASE + i - 1; + /* max tasks=1, max dma=1, no extra */ + out_be32(&bmi->fmbm_pp[port_id], 0); + /* port FIFO size - 256 bytes, no extra */ + out_be32(&bmi->fmbm_pfs[port_id], 0); + } + /* Rx 1G port */ + for (i = 0; i < MAX_NUM_RX_PORT_1G; i++) { + port_id = RX_PORT_1G_BASE + i - 1; + /* max tasks=4, max dma=1, no extra */ + out_be32(&bmi->fmbm_pp[port_id], FMBM_PP_MXT(4)); + /* FIFO size - 4KB, no extra */ + out_be32(&bmi->fmbm_pfs[port_id], FMBM_PFS_IFSZ(0xf)); + } + /* Tx 1G port FIFO size - 4KB, no extra */ + for (i = 0; i < MAX_NUM_TX_PORT_1G; i++) { + port_id = TX_PORT_1G_BASE + i - 1; + /* max tasks=4, max dma=1, no extra */ + out_be32(&bmi->fmbm_pp[port_id], FMBM_PP_MXT(4)); + /* FIFO size - 4KB, no extra */ + out_be32(&bmi->fmbm_pfs[port_id], FMBM_PFS_IFSZ(0xf)); + } + /* Rx 10G port */ + port_id = RX_PORT_10G_BASE - 1; + /* max tasks=12, max dma=3, no extra */ + out_be32(&bmi->fmbm_pp[port_id], FMBM_PP_MXT(12) | FMBM_PP_MXD(3)); + /* FIFO size - 4KB, no extra */ + out_be32(&bmi->fmbm_pfs[port_id], FMBM_PFS_IFSZ(0xf)); + + /* Tx 10G port */ + port_id = TX_PORT_10G_BASE - 1; + /* max tasks=12, max dma=3, no extra */ + out_be32(&bmi->fmbm_pp[port_id], FMBM_PP_MXT(12) | FMBM_PP_MXD(3)); + /* FIFO size - 4KB, no extra */ + out_be32(&bmi->fmbm_pfs[port_id], FMBM_PFS_IFSZ(0xf)); + + /* initialize internal buffers data base (linked list) */ + out_be32(&bmi->fmbm_init, FMBM_INIT_START); + + return 0; +} + +static void fm_init_qmi(struct fm_qmi_common *qmi) +{ + /* disable all error interrupts */ + out_be32(&qmi->fmqm_eien, FMQM_EIEN_DISABLE_ALL); + /* clear all error events */ + out_be32(&qmi->fmqm_eie, FMQM_EIE_CLEAR_ALL); + + /* disable all interrupts */ + out_be32(&qmi->fmqm_ien, FMQM_IEN_DISABLE_ALL); + /* clear all interrupts */ + out_be32(&qmi->fmqm_ie, FMQM_IE_CLEAR_ALL); +} + +static int fm_init_common(struct device_d *dev, struct ccsr_fman *reg) +{ + int ret; + + /* Upload the Fman microcode if it's present */ + ret = fman_upload_firmware(dev, ®->fm_imem); + if (ret) + return ret; + + fm_init_qmi(®->fm_qmi_common); + fm_init_fpm(®->fm_fpm); + + /* clear DMA status */ + setbits_be32(®->fm_dma.fmdmsr, FMDMSR_CLEAR_ALL); + + /* set DMA mode */ + setbits_be32(®->fm_dma.fmdmmr, FMDMMR_SBER); + + return fm_init_bmi(®->fm_bmi_common); +} + +#define memac_out_32(a, v) out_be32(a, v) +#define memac_in_32(a) in_be32(a) +#define memac_clrbits_32(a, v) clrbits_be32(a, v) +#define memac_setbits_32(a, v) setbits_be32(a, v) + +static int memac_mdio_write(struct mii_bus *bus, int port_addr, int regnum, u16 value) +{ + struct fsl_fman_mdio *priv = container_of(bus, struct fsl_fman_mdio, bus); + struct memac_mdio_controller *regs = priv->regs; + u32 mdio_ctl; + + memac_clrbits_32(®s->mdio_stat, MDIO_STAT_ENC); + + /* Wait till the bus is free */ + while ((memac_in_32(®s->mdio_stat)) & MDIO_STAT_BSY) + ; + + /* Set the port and dev addr */ + mdio_ctl = MDIO_CTL_PORT_ADDR(port_addr) | MDIO_CTL_DEV_ADDR(regnum); + memac_out_32(®s->mdio_ctl, mdio_ctl); + + /* Wait till the bus is free */ + while ((memac_in_32(®s->mdio_stat)) & MDIO_STAT_BSY) + ; + + /* Write the value to the register */ + memac_out_32(®s->mdio_data, MDIO_DATA(value)); + + /* Wait till the MDIO write is complete */ + while ((memac_in_32(®s->mdio_data)) & MDIO_DATA_BSY) + ; + + return 0; +} + +static int memac_mdio_read(struct mii_bus *bus, int port_addr, int regnum) +{ + struct fsl_fman_mdio *priv = container_of(bus, struct fsl_fman_mdio, bus); + struct memac_mdio_controller *regs = priv->regs; + u32 mdio_ctl; + + memac_clrbits_32(®s->mdio_stat, MDIO_STAT_ENC); + + /* Wait till the bus is free */ + while ((memac_in_32(®s->mdio_stat)) & MDIO_STAT_BSY) + ; + + /* Set the Port and Device Addrs */ + mdio_ctl = MDIO_CTL_PORT_ADDR(port_addr) | MDIO_CTL_DEV_ADDR(regnum); + memac_out_32(®s->mdio_ctl, mdio_ctl); + + /* Wait till the bus is free */ + while ((memac_in_32(®s->mdio_stat)) & MDIO_STAT_BSY) + ; + + /* Initiate the read */ + mdio_ctl |= MDIO_CTL_READ; + memac_out_32(®s->mdio_ctl, mdio_ctl); + + /* Wait till the MDIO write is complete */ + while ((memac_in_32(®s->mdio_data)) & MDIO_DATA_BSY) + ; + + /* Return all Fs if nothing was there */ + if (memac_in_32(®s->mdio_stat) & MDIO_STAT_RD_ER) + return 0xffff; + + return memac_in_32(®s->mdio_data) & 0xffff; +} + +static u16 muram_readw(u16 *addr) +{ + unsigned long base = (unsigned long)addr & ~0x3UL; + u32 val32 = in_be32((void *)base); + int byte_pos; + u16 ret; + + byte_pos = (unsigned long)addr & 0x3UL; + if (byte_pos) + ret = (u16)(val32 & 0x0000ffff); + else + ret = (u16)((val32 & 0xffff0000) >> 16); + + return ret; +} + +static void muram_writew(u16 *addr, u16 val) +{ + unsigned long base = (unsigned long)addr & ~0x3UL; + u32 org32 = in_be32((void *)base); + u32 val32; + int byte_pos; + + byte_pos = (unsigned long)addr & 0x3UL; + if (byte_pos) + val32 = (org32 & 0xffff0000) | val; + else + val32 = (org32 & 0x0000ffff) | ((u32)val << 16); + + out_be32((void *)base, val32); +} + +static void bmi_rx_port_disable(struct fm_bmi_rx_port *rx_port) +{ + int timeout = 1000000; + + clrbits_be32(&rx_port->fmbm_rcfg, FMBM_RCFG_EN); + + /* wait until the rx port is not busy */ + while ((in_be32(&rx_port->fmbm_rst) & FMBM_RST_BSY) && timeout--) + ; +} + +static void bmi_rx_port_init(struct fm_bmi_rx_port *rx_port) +{ + /* set BMI to independent mode, Rx port disable */ + out_be32(&rx_port->fmbm_rcfg, FMBM_RCFG_IM); + /* clear FOF in IM case */ + out_be32(&rx_port->fmbm_rim, 0); + /* Rx frame next engine -RISC */ + out_be32(&rx_port->fmbm_rfne, NIA_ENG_RISC | NIA_RISC_AC_IM_RX); + /* Rx command attribute - no order, MR[3] = 1 */ + clrbits_be32(&rx_port->fmbm_rfca, FMBM_RFCA_ORDER | FMBM_RFCA_MR_MASK); + setbits_be32(&rx_port->fmbm_rfca, FMBM_RFCA_MR(4)); + /* enable Rx statistic counters */ + out_be32(&rx_port->fmbm_rstc, FMBM_RSTC_EN); + /* disable Rx performance counters */ + out_be32(&rx_port->fmbm_rpc, 0); +} + +static void bmi_tx_port_disable(struct fm_bmi_tx_port *tx_port) +{ + int timeout = 1000000; + + clrbits_be32(&tx_port->fmbm_tcfg, FMBM_TCFG_EN); + + /* wait until the tx port is not busy */ + while ((in_be32(&tx_port->fmbm_tst) & FMBM_TST_BSY) && timeout--) + ; +} + +static void bmi_tx_port_init(struct fm_bmi_tx_port *tx_port) +{ + /* set BMI to independent mode, Tx port disable */ + out_be32(&tx_port->fmbm_tcfg, FMBM_TCFG_IM); + /* Tx frame next engine -RISC */ + out_be32(&tx_port->fmbm_tfne, NIA_ENG_RISC | NIA_RISC_AC_IM_TX); + out_be32(&tx_port->fmbm_tfene, NIA_ENG_RISC | NIA_RISC_AC_IM_TX); + /* Tx command attribute - no order, MR[3] = 1 */ + clrbits_be32(&tx_port->fmbm_tfca, FMBM_TFCA_ORDER | FMBM_TFCA_MR_MASK); + setbits_be32(&tx_port->fmbm_tfca, FMBM_TFCA_MR(4)); + /* enable Tx statistic counters */ + out_be32(&tx_port->fmbm_tstc, FMBM_TSTC_EN); + /* disable Tx performance counters */ + out_be32(&tx_port->fmbm_tpc, 0); +} + +static int fm_eth_rx_port_parameter_init(struct fm_eth *fm_eth) +{ + struct fm_port_global_pram *pram; + u32 pram_page_offset; + void *rx_bd_ring_base; + void *rx_buf_pool; + u32 bd_ring_base_lo, bd_ring_base_hi; + u32 buf_lo, buf_hi; + struct fm_port_bd *rxbd; + struct fm_port_qd *rxqd; + struct fm_bmi_rx_port *bmi_rx_port = fm_eth->rx_port; + int i; + + /* alloc global parameter ram at MURAM */ + pram = fm_muram_alloc(FM_PRAM_SIZE, FM_PRAM_ALIGN); + if (!pram) { + printf("%s: No muram for Rx global parameter\n", __func__); + return -ENOMEM; + } + + fm_eth->rx_pram = pram; + + /* parameter page offset to MURAM */ + pram_page_offset = (void *)pram - fm_muram_base(); + + /* enable global mode- snooping data buffers and BDs */ + out_be32(&pram->mode, PRAM_MODE_GLOBAL); + + /* init the Rx queue descriptor pointer */ + out_be32(&pram->rxqd_ptr, pram_page_offset + 0x20); + + /* set the max receive buffer length, power of 2 */ + muram_writew(&pram->mrblr, MAX_RXBUF_LOG2); + + /* alloc Rx buffer descriptors from main memory */ + rx_bd_ring_base = dma_alloc_coherent(sizeof(struct fm_port_bd) + * RX_BD_RING_SIZE, DMA_ADDRESS_BROKEN); + if (!rx_bd_ring_base) + return -ENOMEM; + + memset(rx_bd_ring_base, 0, sizeof(struct fm_port_bd) + * RX_BD_RING_SIZE); + + /* alloc Rx buffer from main memory */ + rx_buf_pool = malloc(MAX_RXBUF_LEN * RX_BD_RING_SIZE); + if (!rx_buf_pool) + return -ENOMEM; + + memset(rx_buf_pool, 0, MAX_RXBUF_LEN * RX_BD_RING_SIZE); + + /* save them to fm_eth */ + fm_eth->rx_bd_ring = rx_bd_ring_base; + fm_eth->cur_rxbd = rx_bd_ring_base; + fm_eth->rx_buf = rx_buf_pool; + + /* init Rx BDs ring */ + rxbd = rx_bd_ring_base; + for (i = 0; i < RX_BD_RING_SIZE; i++) { + muram_writew(&rxbd->status, RxBD_EMPTY); + muram_writew(&rxbd->len, 0); + buf_hi = upper_32_bits(virt_to_phys(rx_buf_pool + + i * MAX_RXBUF_LEN)); + buf_lo = lower_32_bits(virt_to_phys(rx_buf_pool + + i * MAX_RXBUF_LEN)); + muram_writew(&rxbd->buf_ptr_hi, (u16)buf_hi); + out_be32(&rxbd->buf_ptr_lo, buf_lo); + rxbd++; + } + + /* set the Rx queue descriptor */ + rxqd = &pram->rxqd; + muram_writew(&rxqd->gen, 0); + bd_ring_base_hi = upper_32_bits(virt_to_phys(rx_bd_ring_base)); + bd_ring_base_lo = lower_32_bits(virt_to_phys(rx_bd_ring_base)); + muram_writew(&rxqd->bd_ring_base_hi, (u16)bd_ring_base_hi); + out_be32(&rxqd->bd_ring_base_lo, bd_ring_base_lo); + muram_writew(&rxqd->bd_ring_size, sizeof(struct fm_port_bd) + * RX_BD_RING_SIZE); + muram_writew(&rxqd->offset_in, 0); + muram_writew(&rxqd->offset_out, 0); + + /* set IM parameter ram pointer to Rx Frame Queue ID */ + out_be32(&bmi_rx_port->fmbm_rfqid, pram_page_offset); + + return 0; +} + +static int fm_eth_tx_port_parameter_init(struct fm_eth *fm_eth) +{ + struct fm_port_global_pram *pram; + u32 pram_page_offset; + void *tx_bd_ring_base; + u32 bd_ring_base_lo, bd_ring_base_hi; + struct fm_port_bd *txbd; + struct fm_port_qd *txqd; + struct fm_bmi_tx_port *bmi_tx_port = fm_eth->tx_port; + int i; + + /* alloc global parameter ram at MURAM */ + pram = fm_muram_alloc(FM_PRAM_SIZE, FM_PRAM_ALIGN); + if (!pram) + return -ENOMEM; + + fm_eth->tx_pram = pram; + + /* parameter page offset to MURAM */ + pram_page_offset = (void *)pram - fm_muram_base(); + + /* enable global mode- snooping data buffers and BDs */ + out_be32(&pram->mode, PRAM_MODE_GLOBAL); + + /* init the Tx queue descriptor pionter */ + out_be32(&pram->txqd_ptr, pram_page_offset + 0x40); + + /* alloc Tx buffer descriptors from main memory */ + tx_bd_ring_base = dma_alloc_coherent(sizeof(struct fm_port_bd) + * TX_BD_RING_SIZE, DMA_ADDRESS_BROKEN); + if (!tx_bd_ring_base) + return -ENOMEM; + + memset(tx_bd_ring_base, 0, sizeof(struct fm_port_bd) + * TX_BD_RING_SIZE); + /* save it to fm_eth */ + fm_eth->tx_bd_ring = tx_bd_ring_base; + fm_eth->cur_txbd = tx_bd_ring_base; + + /* init Tx BDs ring */ + txbd = tx_bd_ring_base; + for (i = 0; i < TX_BD_RING_SIZE; i++) { + muram_writew(&txbd->status, TxBD_LAST); + muram_writew(&txbd->len, 0); + muram_writew(&txbd->buf_ptr_hi, 0); + out_be32(&txbd->buf_ptr_lo, 0); + txbd++; + } + + /* set the Tx queue decriptor */ + txqd = &pram->txqd; + bd_ring_base_hi = upper_32_bits(virt_to_phys(tx_bd_ring_base)); + bd_ring_base_lo = lower_32_bits(virt_to_phys(tx_bd_ring_base)); + muram_writew(&txqd->bd_ring_base_hi, (u16)bd_ring_base_hi); + out_be32(&txqd->bd_ring_base_lo, bd_ring_base_lo); + muram_writew(&txqd->bd_ring_size, sizeof(struct fm_port_bd) + * TX_BD_RING_SIZE); + muram_writew(&txqd->offset_in, 0); + muram_writew(&txqd->offset_out, 0); + + /* set IM parameter ram pointer to Tx Confirmation Frame Queue ID */ + out_be32(&bmi_tx_port->fmbm_tcfqid, pram_page_offset); + + return 0; +} + +static void fmc_tx_port_graceful_stop_enable(struct fm_eth *fm_eth) +{ + struct fm_port_global_pram *pram; + + pram = fm_eth->tx_pram; + /* graceful stop transmission of frames */ + setbits_be32(&pram->mode, PRAM_MODE_GRACEFUL_STOP); +} + +static void fmc_tx_port_graceful_stop_disable(struct fm_eth *fm_eth) +{ + struct fm_port_global_pram *pram; + + pram = fm_eth->tx_pram; + /* re-enable transmission of frames */ + clrbits_be32(&pram->mode, PRAM_MODE_GRACEFUL_STOP); +} + +static void memac_adjust_link_speed(struct eth_device *edev) +{ + struct fm_eth *fm_eth = to_fm_eth(edev); + struct memac *regs = fm_eth->regs; + int speed = edev->phydev->speed; + u32 if_mode; + phy_interface_t type = fm_eth->enet_if; + + if_mode = in_be32(®s->if_mode); + + if (type == PHY_INTERFACE_MODE_RGMII || + type == PHY_INTERFACE_MODE_RGMII_ID || + type == PHY_INTERFACE_MODE_RGMII_TXID) { + if_mode &= ~IF_MODE_EN_AUTO; + if_mode &= ~IF_MODE_SETSP_MASK; + + switch (speed) { + case SPEED_1000: + if_mode |= IF_MODE_SETSP_1000M; + break; + case SPEED_100: + if_mode |= IF_MODE_SETSP_100M; + break; + case SPEED_10: + if_mode |= IF_MODE_SETSP_10M; + default: + break; + } + } + + out_be32(®s->if_mode, if_mode); + + return; +} + +static int fm_eth_open(struct eth_device *edev) +{ + struct fm_eth *fm_eth = to_fm_eth(edev); + struct memac *regs = fm_eth->regs; + int ret; + + ret = phy_device_connect(edev, NULL, -1, memac_adjust_link_speed, 0, + fm_eth->enet_if); + if (ret) + return ret; + + /* enable bmi Rx port */ + setbits_be32(&fm_eth->rx_port->fmbm_rcfg, FMBM_RCFG_EN); + /* enable MAC rx/tx port */ + setbits_be32(®s->command_config, + MEMAC_CMD_CFG_RXTX_EN | MEMAC_CMD_CFG_NO_LEN_CHK); + + /* enable bmi Tx port */ + setbits_be32(&fm_eth->tx_port->fmbm_tcfg, FMBM_TCFG_EN); + /* re-enable transmission of frame */ + fmc_tx_port_graceful_stop_disable(fm_eth); + + return 0; +} + +static void memac_disable_mac(struct fm_eth *fm_eth) +{ + struct memac *regs = fm_eth->regs; + + clrbits_be32(®s->command_config, MEMAC_CMD_CFG_RXTX_EN); +} + +static void fm_eth_halt(struct eth_device *edev) +{ + struct fm_eth *fm_eth = to_fm_eth(edev); + + /* graceful stop the transmission of frames */ + fmc_tx_port_graceful_stop_enable(fm_eth); + /* disable bmi Tx port */ + bmi_tx_port_disable(fm_eth->tx_port); + /* disable MAC rx/tx port */ + memac_disable_mac(fm_eth); + /* disable bmi Rx port */ + bmi_rx_port_disable(fm_eth->rx_port); +} + +static int fm_eth_send(struct eth_device *edev, void *buf, int len) +{ + struct fm_eth *fm_eth = to_fm_eth(edev); + struct fm_port_global_pram *pram; + struct fm_port_bd *txbd, *txbd_base; + u16 offset_in; + int i; + dma_addr_t dma; + + pram = fm_eth->tx_pram; + txbd = fm_eth->cur_txbd; + + /* find one empty TxBD */ + for (i = 0; muram_readw(&txbd->status) & TxBD_READY; i++) { + udelay(100); + if (i > 0x1000) { + dev_err(&edev->dev, "Tx buffer not ready, txbd->status = 0x%x\n", + muram_readw(&txbd->status)); + return -EIO; + } + } + + dma = dma_map_single(fm_eth->dev, buf, len, DMA_TO_DEVICE); + if (dma_mapping_error(fm_eth->dev, dma)) + return -EFAULT; + + /* setup TxBD */ + muram_writew(&txbd->buf_ptr_hi, (u16)upper_32_bits(dma)); + out_be32(&txbd->buf_ptr_lo, lower_32_bits(dma)); + muram_writew(&txbd->len, len); + muram_writew(&txbd->status, TxBD_READY | TxBD_LAST); + + /* update TxQD, let RISC to send the packet */ + offset_in = muram_readw(&pram->txqd.offset_in); + offset_in += sizeof(struct fm_port_bd); + if (offset_in >= muram_readw(&pram->txqd.bd_ring_size)) + offset_in = 0; + muram_writew(&pram->txqd.offset_in, offset_in); + + /* wait for buffer to be transmitted */ + for (i = 0; muram_readw(&txbd->status) & TxBD_READY; i++) { + udelay(10); + if (i > 0x10000) { + dev_err(&edev->dev, "Tx error, txbd->status = 0x%x\n", + muram_readw(&txbd->status)); + return -EIO; + } + } + + dma_unmap_single(fm_eth->dev, dma, len, DMA_TO_DEVICE); + + /* advance the TxBD */ + txbd++; + txbd_base = fm_eth->tx_bd_ring; + if (txbd >= (txbd_base + TX_BD_RING_SIZE)) + txbd = txbd_base; + /* update current txbd */ + fm_eth->cur_txbd = (void *)txbd; + + return 0; +} + +static int fm_eth_recv(struct eth_device *edev) +{ + struct fm_eth *fm_eth = to_fm_eth(edev); + struct fm_port_global_pram *pram; + struct fm_port_bd *rxbd, *rxbd_base; + u16 status, len; + u32 buf_lo, buf_hi; + u8 *data; + u16 offset_out; + int ret = 1; + + pram = fm_eth->rx_pram; + rxbd = fm_eth->cur_rxbd; + status = muram_readw(&rxbd->status); + + while (!(status & RxBD_EMPTY)) { + if (!(status & RxBD_ERROR)) { + buf_hi = muram_readw(&rxbd->buf_ptr_hi); + buf_lo = in_be32(&rxbd->buf_ptr_lo); + data = (u8 *)((unsigned long)(buf_hi << 16) << 16 | buf_lo); + len = muram_readw(&rxbd->len); + + dma_sync_single_for_cpu((unsigned long)data, + len, + DMA_FROM_DEVICE); + + net_receive(edev, data, len); + + dma_sync_single_for_device((unsigned long)data, + len, + DMA_FROM_DEVICE); + } else { + dev_err(&edev->dev, "Rx error\n"); + ret = 0; + } + + /* clear the RxBDs */ + muram_writew(&rxbd->status, RxBD_EMPTY); + muram_writew(&rxbd->len, 0); + + /* advance RxBD */ + rxbd++; + rxbd_base = fm_eth->rx_bd_ring; + if (rxbd >= (rxbd_base + RX_BD_RING_SIZE)) + rxbd = rxbd_base; + /* read next status */ + status = muram_readw(&rxbd->status); + + /* update RxQD */ + offset_out = muram_readw(&pram->rxqd.offset_out); + offset_out += sizeof(struct fm_port_bd); + if (offset_out >= muram_readw(&pram->rxqd.bd_ring_size)) + offset_out = 0; + muram_writew(&pram->rxqd.offset_out, offset_out); + } + fm_eth->cur_rxbd = rxbd; + + return ret; +} + +static void memac_init_mac(struct fm_eth *fm_eth) +{ + struct memac *regs = fm_eth->regs; + + /* mask all interrupt */ + out_be32(®s->imask, IMASK_MASK_ALL); + + /* clear all events */ + out_be32(®s->ievent, IEVENT_CLEAR_ALL); + + /* set the max receive length */ + out_be32(®s->maxfrm, MAX_RXBUF_LEN); + + /* multicast frame reception for the hash entry disable */ + out_be32(®s->hashtable_ctrl, 0); +} + +static int memac_set_ethaddr(struct eth_device *edev, const unsigned char *adr) +{ + struct fm_eth *fm_eth = to_fm_eth(edev); + struct memac *regs = fm_eth->regs; + u32 mac_addr0, mac_addr1; + + /* + * if a station address of 0x12345678ABCD, perform a write to + * MAC_ADDR0 of 0x78563412, MAC_ADDR1 of 0x0000CDAB + */ + mac_addr0 = (adr[3] << 24) | (adr[2] << 16) | \ + (adr[1] << 8) | (adr[0]); + out_be32(®s->mac_addr_0, mac_addr0); + + mac_addr1 = ((adr[5] << 8) | adr[4]) & 0x0000ffff; + out_be32(®s->mac_addr_1, mac_addr1); + + return 0; +} + +static int memac_get_ethaddr(struct eth_device *edev, unsigned char *adr) +{ + struct fm_eth *fm_eth = to_fm_eth(edev); + struct memac *regs = fm_eth->regs; + u32 mac_addr0, mac_addr1; + + mac_addr0 = in_be32(®s->mac_addr_0); + mac_addr1 = in_be32(®s->mac_addr_1); + + adr[0] = mac_addr0 & 0xff; + adr[1] = (mac_addr0 >> 8) & 0xff; + adr[2] = (mac_addr0 >> 16) & 0xff; + adr[3] = (mac_addr0 >> 24) & 0xff; + adr[4] = mac_addr1 & 0xff; + adr[5] = (mac_addr1 >> 8) & 0xff; + + return 0; +} + +static void memac_set_interface_mode(struct fm_eth *fm_eth, + phy_interface_t type) +{ + struct memac *regs = fm_eth->regs; + u32 if_mode; + + /* clear all bits relative with interface mode */ + if_mode = in_be32(®s->if_mode) & ~IF_MODE_MASK; + + /* set interface mode */ + switch (type) { + case PHY_INTERFACE_MODE_GMII: + if_mode |= IF_MODE_GMII | IF_MODE_EN_AUTO; + break; + case PHY_INTERFACE_MODE_RGMII: + case PHY_INTERFACE_MODE_RGMII_ID: + case PHY_INTERFACE_MODE_RGMII_TXID: + if_mode |= IF_MODE_GMII | IF_MODE_RG | IF_MODE_EN_AUTO; + break; + case PHY_INTERFACE_MODE_SGMII: + case PHY_INTERFACE_MODE_QSGMII: + if_mode |= IF_MODE_GMII | IF_MODE_EN_AUTO; + break; + case PHY_INTERFACE_MODE_XGMII: + if_mode |= IF_MODE_XGMII; + break; + default: + break; + } + + out_be32(®s->if_mode, if_mode); +} + +static int fm_eth_startup(struct fm_eth *fm_eth) +{ + int ret; + + ret = fm_eth_rx_port_parameter_init(fm_eth); + if (ret) + return ret; + + ret = fm_eth_tx_port_parameter_init(fm_eth); + if (ret) + return ret; + + /* setup the MAC controller */ + memac_init_mac(fm_eth); + + /* init bmi rx port, IM mode and disable */ + bmi_rx_port_init(fm_eth->rx_port); + + /* init bmi tx port, IM mode and disable */ + bmi_tx_port_init(fm_eth->tx_port); + + memac_set_interface_mode(fm_eth, fm_eth->enet_if); + + return 0; +} + +static int fsl_fman_mdio_probe(struct device_d *dev) +{ + struct resource *iores; + int ret; + struct fsl_fman_mdio *priv; + + dev_dbg(dev, "probe\n"); + + iores = dev_request_mem_resource(dev, 0); + if (IS_ERR(iores)) + return PTR_ERR(iores); + + priv = xzalloc(sizeof(*priv)); + + priv->bus.read = memac_mdio_read; + priv->bus.write = memac_mdio_write; + priv->bus.parent = dev; + priv->regs = IOMEM(iores->start); + + memac_setbits_32(&priv->regs->mdio_stat, + MDIO_STAT_CLKDIV(258) | MDIO_STAT_NEG); + + ret = mdiobus_register(&priv->bus); + if (ret) + return ret; + + return 0; +} + +static int fsl_fman_port_probe(struct device_d *dev) +{ + struct resource *iores; + int ret; + struct fsl_fman_port *port; + unsigned long type; + + dev_dbg(dev, "probe\n"); + + ret = dev_get_drvdata(dev, (const void **)&type); + if (ret) + return ret; + + iores = dev_request_mem_resource(dev, 0); + if (IS_ERR(iores)) + return PTR_ERR(iores); + + port = xzalloc(sizeof(*port)); + + port->regs = IOMEM(iores->start); + port->type = type; + + if (type == FMAN_PORT_TYPE_RX) + port->rxport = port->regs; + else + port->txport = port->regs; + + dev->priv = port; + + return 0; +} + +static int fsl_fman_memac_port_bind(struct fm_eth *fm_eth, enum fman_port_type type) +{ + struct device_node *macnp = fm_eth->dev->device_node; + struct device_node *portnp; + struct device_d *portdev; + struct fsl_fman_port *port; + + portnp = of_parse_phandle(macnp, "fsl,fman-ports", type); + if (!portnp) { + dev_err(fm_eth->dev, "of_parse_phandle(%s, fsl,fman-ports) failed\n", + macnp->full_name); + return -EINVAL; + } + + portdev = of_find_device_by_node(portnp); + if (!portdev) + return -ENOENT; + + port = portdev->priv; + if (!port) + return -EINVAL; + + if (type == FMAN_PORT_TYPE_TX) + fm_eth->tx_port = port->txport; + else + fm_eth->rx_port = port->rxport; + + return 0; +} + +static int fsl_fman_memac_probe(struct device_d *dev) +{ + struct resource *iores; + struct fm_eth *fm_eth; + struct eth_device *edev; + int ret; + int phy_mode; + + dev_dbg(dev, "probe\n"); + + iores = dev_request_mem_resource(dev, 0); + if (IS_ERR(iores)) + return PTR_ERR(iores); + + /* alloc the FMan ethernet private struct */ + fm_eth = xzalloc(sizeof(*fm_eth)); + + fm_eth->dev = dev; + + ret = fsl_fman_memac_port_bind(fm_eth, FMAN_PORT_TYPE_TX); + if (ret) + return ret; + + ret = fsl_fman_memac_port_bind(fm_eth, FMAN_PORT_TYPE_RX); + if (ret) + return ret; + + phy_mode = of_get_phy_mode(dev->device_node); + if (phy_mode < 0) + return phy_mode; + + fm_eth->enet_if = phy_mode; + + fm_eth->regs = IOMEM(iores->start); + + dev->priv = fm_eth; + + edev = &fm_eth->edev; + edev->open = fm_eth_open; + edev->halt = fm_eth_halt; + edev->send = fm_eth_send; + edev->recv = fm_eth_recv; + edev->get_ethaddr = memac_get_ethaddr; + edev->set_ethaddr = memac_set_ethaddr; + edev->parent = dev; + + /* startup the FM im */ + ret = fm_eth_startup(fm_eth); + if (ret) + return ret; + + ret = eth_register(edev); + if (ret) + return ret; + + return 0; +} + +static int fsl_fman_muram_probe(struct device_d *dev) +{ + struct resource *iores; + + dev_dbg(dev, "probe\n"); + + iores = dev_request_mem_resource(dev, 0); + if (IS_ERR(iores)) + return PTR_ERR(iores); + + muram.base = IOMEM(iores->start); + muram.size = resource_size(iores); + muram.alloc = muram.base + FM_MURAM_RES_SIZE; + muram.top = muram.base + muram.size; + + return 0; +} + +static struct of_device_id fsl_fman_mdio_dt_ids[] = { + { + .compatible = "fsl,fman-memac-mdio", + }, { + } +}; + +static struct driver_d fman_mdio_driver = { + .name = "fsl-fman-mdio", + .probe = fsl_fman_mdio_probe, + .of_compatible = DRV_OF_COMPAT(fsl_fman_mdio_dt_ids), +}; + +static struct of_device_id fsl_fman_port_dt_ids[] = { + { + .compatible = "fsl,fman-v3-port-rx", + .data = (void *)FMAN_PORT_TYPE_RX, + }, { + .compatible = "fsl,fman-v3-port-tx", + .data = (void *)FMAN_PORT_TYPE_TX, + }, { + } +}; + +static struct driver_d fman_port_driver = { + .name = "fsl-fman-port", + .probe = fsl_fman_port_probe, + .of_compatible = DRV_OF_COMPAT(fsl_fman_port_dt_ids), +}; + +static struct of_device_id fsl_fman_memac_dt_ids[] = { + { + .compatible = "fsl,fman-memac", + }, { + } +}; + +static struct driver_d fman_memac_driver = { + .name = "fsl-fman-memac", + .probe = fsl_fman_memac_probe, + .of_compatible = DRV_OF_COMPAT(fsl_fman_memac_dt_ids), +}; + +static struct of_device_id fsl_fman_muram_dt_ids[] = { + { + .compatible = "fsl,fman-muram", + }, { + } +}; + +static struct driver_d fman_muram_driver = { + .name = "fsl-fman-muram", + .probe = fsl_fman_muram_probe, + .of_compatible = DRV_OF_COMPAT(fsl_fman_muram_dt_ids), +}; + +static int fsl_fman_probe(struct device_d *dev) +{ + struct resource *iores; + struct ccsr_fman *reg; + int ret; + + dev_dbg(dev, "----------------> probe\n"); + + iores = dev_get_resource(dev, IORESOURCE_MEM, 0); + if (IS_ERR(iores)) + return PTR_ERR(iores); + + reg = IOMEM(iores->start); + + ret = of_platform_populate(dev->device_node, NULL, dev); + if (ret) + return ret; + + platform_driver_register(&fman_muram_driver); + platform_driver_register(&fman_mdio_driver); + platform_driver_register(&fman_port_driver); + platform_driver_register(&fman_memac_driver); + + ret = fm_init_common(dev, reg); + if (ret) + return ret; + + return 0; +} + +static struct of_device_id fsl_fman_dt_ids[] = { + { + .compatible = "fsl,fman", + }, { + } +}; + +static struct driver_d fman_driver = { + .name = "fsl-fman", + .probe = fsl_fman_probe, + .of_compatible = DRV_OF_COMPAT(fsl_fman_dt_ids), +}; +device_platform_driver(fman_driver); diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig index 0665aefd99..c08b8257a7 100644 --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -48,6 +48,11 @@ config NATIONAL_PHY ---help--- Currently supports the DP83865 PHY. +config REALTEK_PHY + bool "Driver for Realtek PHYs" + ---help--- + Supports the Realtek 821x PHY. + config SMSC_PHY bool "Drivers for SMSC PHYs" ---help--- diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile index 5f11a857d4..7053b5762c 100644 --- a/drivers/net/phy/Makefile +++ b/drivers/net/phy/Makefile @@ -1,4 +1,4 @@ -obj-y += phy.o mdio_bus.o +obj-y += phy.o mdio_bus.o phy-core.o obj-$(CONFIG_AR8327N_PHY) += ar8327.o obj-$(CONFIG_AT803X_PHY) += at803x.o obj-$(CONFIG_DAVICOM_PHY) += davicom.o @@ -6,6 +6,7 @@ obj-$(CONFIG_LXT_PHY) += lxt.o obj-$(CONFIG_MARVELL_PHY) += marvell.o obj-$(CONFIG_MICREL_PHY) += micrel.o obj-$(CONFIG_NATIONAL_PHY) += national.o +obj-$(CONFIG_REALTEK_PHY) += realtek.o obj-$(CONFIG_SMSC_PHY) += smsc.o obj-$(CONFIG_NET_DSA_MV88E6XXX) += mv88e6xxx/ diff --git a/drivers/net/phy/phy-core.c b/drivers/net/phy/phy-core.c new file mode 100644 index 0000000000..21daaa9a2b --- /dev/null +++ b/drivers/net/phy/phy-core.c @@ -0,0 +1,175 @@ +#include <common.h> +#include <linux/phy.h> + +/** + * phy_modify - Convenience function for modifying a given PHY register + * @phydev: the phy_device struct + * @regnum: register number to write + * @mask: bit mask of bits to clear + * @set: new value of bits set in mask to write to @regnum + * + */ +int phy_modify(struct phy_device *phydev, u32 regnum, u16 mask, u16 set) +{ + int ret; + + ret = phy_read(phydev, regnum); + if (ret < 0) + return ret; + + ret = phy_write(phydev, regnum, (ret & ~mask) | set); + + return ret < 0 ? ret : 0; +} + +static int phy_read_page(struct phy_device *phydev) +{ + struct phy_driver *phydrv = to_phy_driver(phydev->dev.driver); + + return phydrv->read_page(phydev); +} + +static int phy_write_page(struct phy_device *phydev, int page) +{ + struct phy_driver *phydrv = to_phy_driver(phydev->dev.driver); + + return phydrv->write_page(phydev, page); +} + +/** + * phy_save_page() - take the bus lock and save the current page + * @phydev: a pointer to a &struct phy_device + * + * Take the MDIO bus lock, and return the current page number. On error, + * returns a negative errno. phy_restore_page() must always be called + * after this, irrespective of success or failure of this call. + */ +int phy_save_page(struct phy_device *phydev) +{ + return phy_read_page(phydev); +} + +/** + * phy_select_page() - take the bus lock, save the current page, and set a page + * @phydev: a pointer to a &struct phy_device + * @page: desired page + * + * Take the MDIO bus lock to protect against concurrent access, save the + * current PHY page, and set the current page. On error, returns a + * negative errno, otherwise returns the previous page number. + * phy_restore_page() must always be called after this, irrespective + * of success or failure of this call. + */ +int phy_select_page(struct phy_device *phydev, int page) +{ + int ret, oldpage; + + oldpage = ret = phy_save_page(phydev); + if (ret < 0) + return ret; + + if (oldpage != page) { + ret = phy_write_page(phydev, page); + if (ret < 0) + return ret; + } + + return oldpage; +} + +/** + * phy_restore_page() - restore the page register and release the bus lock + * @phydev: a pointer to a &struct phy_device + * @oldpage: the old page, return value from phy_save_page() or phy_select_page() + * @ret: operation's return code + * + * Release the MDIO bus lock, restoring @oldpage if it is a valid page. + * This function propagates the earliest error code from the group of + * operations. + * + * Returns: + * @oldpage if it was a negative value, otherwise + * @ret if it was a negative errno value, otherwise + * phy_write_page()'s negative value if it were in error, otherwise + * @ret. + */ +int phy_restore_page(struct phy_device *phydev, int oldpage, int ret) +{ + int r; + + if (oldpage >= 0) { + r = phy_write_page(phydev, oldpage); + + /* Propagate the operation return code if the page write + * was successful. + */ + if (ret >= 0 && r < 0) + ret = r; + } else { + /* Propagate the phy page selection error code */ + ret = oldpage; + } + + return ret; +} + +/** + * phy_read_paged() - Convenience function for reading a paged register + * @phydev: a pointer to a &struct phy_device + * @page: the page for the phy + * @regnum: register number + * + * Same rules as for phy_read(). + */ +int phy_read_paged(struct phy_device *phydev, int page, u32 regnum) +{ + int ret = 0, oldpage; + + oldpage = phy_select_page(phydev, page); + if (oldpage >= 0) + ret = phy_read(phydev, regnum); + + return phy_restore_page(phydev, oldpage, ret); +} + +/** + * phy_write_paged() - Convenience function for writing a paged register + * @phydev: a pointer to a &struct phy_device + * @page: the page for the phy + * @regnum: register number + * @val: value to write + * + * Same rules as for phy_write(). + */ +int phy_write_paged(struct phy_device *phydev, int page, u32 regnum, u16 val) +{ + int ret = 0, oldpage; + + oldpage = phy_select_page(phydev, page); + if (oldpage >= 0) + ret = phy_write(phydev, regnum, val); + + return phy_restore_page(phydev, oldpage, ret); +} + +/** + * phy_modify_paged() - Convenience function for modifying a paged register + * @phydev: a pointer to a &struct phy_device + * @page: the page for the phy + * @regnum: register number + * @mask: bit mask of bits to clear + * @set: bit mask of bits to set + * + * Same rules as for phy_read() and phy_write(). + */ +int phy_modify_paged(struct phy_device *phydev, int page, u32 regnum, + u16 mask, u16 set) +{ + int ret = 0, oldpage; + + oldpage = phy_select_page(phydev, page); + if (oldpage >= 0) + ret = phy_modify(phydev, regnum, mask, set); + + return phy_restore_page(phydev, oldpage, ret); +} diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c new file mode 100644 index 0000000000..4ae050128c --- /dev/null +++ b/drivers/net/phy/realtek.c @@ -0,0 +1,172 @@ +/* + * drivers/net/phy/realtek.c + * + * Driver for Realtek PHYs + * + * Author: Johnson Leung <r58129@freescale.com> + * + * Copyright (c) 2004 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ +#include <common.h> +#include <init.h> +#include <linux/bitops.h> +#include <linux/phy.h> + +#define RTL821x_PHYSR 0x11 +#define RTL821x_PHYSR_DUPLEX BIT(13) +#define RTL821x_PHYSR_SPEED GENMASK(15, 14) + +#define RTL821x_INER 0x12 +#define RTL8211B_INER_INIT 0x6400 +#define RTL8211E_INER_LINK_STATUS BIT(10) +#define RTL8211F_INER_LINK_STATUS BIT(4) + +#define RTL821x_INSR 0x13 + +#define RTL821x_PAGE_SELECT 0x1f + +#define RTL8211F_INSR 0x1d + +#define RTL8211F_TX_DELAY BIT(8) + +#define RTL8201F_ISR 0x1e +#define RTL8201F_IER 0x13 + +#define RTL8366RB_POWER_SAVE 0x15 +#define RTL8366RB_POWER_SAVE_ON BIT(12) + +static int rtl821x_read_page(struct phy_device *phydev) +{ + return phy_read(phydev, RTL821x_PAGE_SELECT); +} + +static int rtl821x_write_page(struct phy_device *phydev, int page) +{ + return phy_write(phydev, RTL821x_PAGE_SELECT, page); +} + +static int rtl8211_config_aneg(struct phy_device *phydev) +{ + int ret; + + ret = genphy_config_aneg(phydev); + if (ret < 0) + return ret; + + /* Quirk was copied from vendor driver. Unfortunately it includes no + * description of the magic numbers. + */ + if (phydev->speed == SPEED_100 && phydev->autoneg == AUTONEG_DISABLE) { + phy_write(phydev, 0x17, 0x2138); + phy_write(phydev, 0x0e, 0x0260); + } else { + phy_write(phydev, 0x17, 0x2108); + phy_write(phydev, 0x0e, 0x0000); + } + + return 0; +} + +static int rtl8211c_config_init(struct phy_device *phydev) +{ + /* RTL8211C has an issue when operating in Gigabit slave mode */ + phy_set_bits(phydev, MII_CTRL1000, + CTL1000_ENABLE_MASTER | CTL1000_AS_MASTER); + + return genphy_config_init(phydev); +} + +static int rtl8211f_config_init(struct phy_device *phydev) +{ + int ret; + u16 val = 0; + + ret = genphy_config_init(phydev); + if (ret < 0) + return ret; + + /* enable TX-delay for rgmii-id and rgmii-txid, otherwise disable it */ + if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID || + phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) + val = RTL8211F_TX_DELAY; + + return phy_modify_paged(phydev, 0xd08, 0x11, RTL8211F_TX_DELAY, val); +} + +static int rtl8366rb_config_init(struct phy_device *phydev) +{ + int ret; + + ret = genphy_config_init(phydev); + if (ret < 0) + return ret; + + ret = phy_set_bits(phydev, RTL8366RB_POWER_SAVE, + RTL8366RB_POWER_SAVE_ON); + if (ret) { + dev_err(&phydev->dev, "error enabling power management\n"); + } + + return ret; +} + +static struct phy_driver realtek_drvs[] = { + { + PHY_ID_MATCH_EXACT(0x00008201), + .drv.name = "RTL8201CP Ethernet", + .features = PHY_BASIC_FEATURES, + }, { + PHY_ID_MATCH_EXACT(0x001cc816), + .drv.name = "RTL8201F Fast Ethernet", + .features = PHY_BASIC_FEATURES, + .read_page = rtl821x_read_page, + .write_page = rtl821x_write_page, + }, { + PHY_ID_MATCH_EXACT(0x001cc910), + .drv.name = "RTL8211 Gigabit Ethernet", + .features = PHY_GBIT_FEATURES, + .config_aneg = rtl8211_config_aneg, + }, { + PHY_ID_MATCH_EXACT(0x001cc912), + .drv.name = "RTL8211B Gigabit Ethernet", + .features = PHY_GBIT_FEATURES, + }, { + PHY_ID_MATCH_EXACT(0x001cc913), + .drv.name = "RTL8211C Gigabit Ethernet", + .features = PHY_GBIT_FEATURES, + .config_init = rtl8211c_config_init, + }, { + PHY_ID_MATCH_EXACT(0x001cc914), + .drv.name = "RTL8211DN Gigabit Ethernet", + .features = PHY_GBIT_FEATURES, + }, { + PHY_ID_MATCH_EXACT(0x001cc915), + .drv.name = "RTL8211E Gigabit Ethernet", + .features = PHY_GBIT_FEATURES, + }, { + PHY_ID_MATCH_EXACT(0x001cc916), + .drv.name = "RTL8211F Gigabit Ethernet", + .features = PHY_GBIT_FEATURES, + .config_init = &rtl8211f_config_init, + .read_page = rtl821x_read_page, + .write_page = rtl821x_write_page, + }, { + PHY_ID_MATCH_EXACT(0x001cc961), + .drv.name = "RTL8366RB Gigabit Ethernet", + .features = PHY_GBIT_FEATURES, + .config_init = &rtl8366rb_config_init, + }, +}; + +static int __init realtek_phy_init(void) +{ + return phy_drivers_register(realtek_drvs, + ARRAY_SIZE(realtek_drvs)); +} +fs_initcall(realtek_phy_init); diff --git a/drivers/of/base.c b/drivers/of/base.c index b082f0c656..318ba72cb0 100644 --- a/drivers/of/base.c +++ b/drivers/of/base.c @@ -2274,6 +2274,8 @@ char *of_get_reproducible_name(struct device_node *node) return basprintf("[0x%llx]", addr); } + na = of_n_addr_cells(node); + /* * Special workaround for the of partition binding. In the old binding * the partitions are directly under the hardware devicenode whereas in @@ -2286,8 +2288,6 @@ char *of_get_reproducible_name(struct device_node *node) node = node->parent; } - na = of_n_addr_cells(node); - offset = of_read_number(reg, na); str = of_get_reproducible_name(node->parent); diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig index 45c3b351d6..46badeee06 100644 --- a/drivers/pinctrl/Kconfig +++ b/drivers/pinctrl/Kconfig @@ -83,7 +83,7 @@ config PINCTRL_TEGRA_XUSB The pinmux controller found on the Tegra 124 line of SoCs used for the SerDes lanes. -source drivers/pinctrl/mvebu/Kconfig +source "drivers/pinctrl/mvebu/Kconfig" config PINCTRL_VF610 bool diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index d462c11c16..f12ff93f6a 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -37,6 +37,10 @@ config DRIVER_SERIAL_IMX default y bool "i.MX serial driver" +config DRIVER_SERIAL_STM32 + depends on ARCH_STM32MP + bool "stm32mp serial driver" + config DRIVER_SERIAL_STM378X depends on ARCH_MXS default y diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile index 3d9f735ed2..4174cc1ffb 100644 --- a/drivers/serial/Makefile +++ b/drivers/serial/Makefile @@ -13,6 +13,7 @@ obj-$(CONFIG_DRIVER_SERIAL_CLPS711X) += serial_clps711x.o obj-$(CONFIG_DRIVER_SERIAL_NS16550) += serial_ns16550.o obj-$(CONFIG_DRIVER_SERIAL_PL010) += serial_pl010.o obj-$(CONFIG_DRIVER_SERIAL_S3C) += serial_s3c.o +obj-$(CONFIG_DRIVER_SERIAL_STM32) += serial_stm32.o obj-$(CONFIG_DRIVER_SERIAL_ALTERA) += serial_altera.o obj-$(CONFIG_DRIVER_SERIAL_ALTERA_JTAG) += serial_altera_jtag.o obj-$(CONFIG_DRIVER_SERIAL_PXA) += serial_pxa.o diff --git a/drivers/serial/serial_stm32.c b/drivers/serial/serial_stm32.c new file mode 100644 index 0000000000..a84e64e974 --- /dev/null +++ b/drivers/serial/serial_stm32.c @@ -0,0 +1,246 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2016, STMicroelectronics - All Rights Reserved + * Author(s): Vikas Manocha, <vikas.manocha@st.com> for STMicroelectronics. + */ + +#include <common.h> +#include <console.h> +#include <io.h> +#include <linux/clk.h> +#include <init.h> +#include <driver.h> +#include "serial_stm32.h" + +struct stm32_uart_info { + u8 uart_enable_bit; /* UART_CR1_UE */ + bool stm32f4; /* true for STM32F4, false otherwise */ + bool has_fifo; +}; + +struct stm32_uart { + struct console_device cdev; + void __iomem *base; + struct clk *clk; + bool stm32f4; + bool has_fifo; + int uart_enable_bit; +}; + +static struct stm32_uart *to_stm32_uart(struct console_device *cdev) +{ + return container_of(cdev, struct stm32_uart, cdev); +} + +static int stm32_serial_setbaudrate(struct console_device *cdev, int baudrate) +{ + struct stm32_uart *stm32 = to_stm32_uart(cdev); + void __iomem *base = stm32->base; + bool stm32f4 = stm32->stm32f4; + u32 int_div, mantissa, fraction, oversampling; + unsigned long clock_rate; + + clock_rate = clk_get_rate(stm32->clk); + + int_div = DIV_ROUND_CLOSEST(clock_rate, baudrate); + + if (int_div < 16) { + oversampling = 8; + setbits_le32(base + CR1_OFFSET(stm32f4), USART_CR1_OVER8); + } else { + oversampling = 16; + clrbits_le32(base + CR1_OFFSET(stm32f4), USART_CR1_OVER8); + } + + mantissa = (int_div / oversampling) << USART_BRR_M_SHIFT; + fraction = int_div % oversampling; + + writel(mantissa | fraction, base + BRR_OFFSET(stm32f4)); + + return 0; +} + +static int stm32_serial_getc(struct console_device *cdev) +{ + struct stm32_uart *stm32 = to_stm32_uart(cdev); + void __iomem *base = stm32->base; + bool stm32f4 = stm32->stm32f4; + u32 isr = readl(base + ISR_OFFSET(stm32f4)); + + if ((isr & USART_ISR_RXNE) == 0) + return -EAGAIN; + + if (isr & (USART_ISR_PE | USART_ISR_ORE)) { + if (!stm32f4) + setbits_le32(base + ICR_OFFSET, + USART_ICR_PCECF | USART_ICR_ORECF); + else + readl(base + RDR_OFFSET(stm32f4)); + return -EIO; + } + + return readl(base + RDR_OFFSET(stm32f4)); +} + +static void stm32_serial_putc(struct console_device *cdev, char c) +{ + struct stm32_uart *stm32 = to_stm32_uart(cdev); + void __iomem *base = stm32->base; + bool stm32f4 = stm32->stm32f4; + + while ((readl(base + ISR_OFFSET(stm32f4)) & USART_ISR_TXE) == 0); + + writel(c, base + TDR_OFFSET(stm32f4)); +} + +static int stm32_serial_tstc(struct console_device *cdev) +{ + struct stm32_uart *stm32 = to_stm32_uart(cdev); + void __iomem *base = stm32->base; + bool stm32f4 = stm32->stm32f4; + + return readl(base + ISR_OFFSET(stm32f4)) & USART_ISR_RXNE ? 1 : 0; +} + +static void stm32_serial_flush(struct console_device *cdev) +{ + struct stm32_uart *stm32 = to_stm32_uart(cdev); + void __iomem *base = stm32->base; + bool stm32f4 = stm32->stm32f4; + + while (!(readl(base + ISR_OFFSET(stm32f4)) & USART_ISR_TXE)); +} + +static void stm32_serial_init(struct console_device *cdev) +{ + struct stm32_uart *stm32 = to_stm32_uart(cdev); + void __iomem *base = stm32->base; + bool stm32f4 = stm32->stm32f4; + u8 uart_enable_bit = stm32->uart_enable_bit; + u32 cr1; + + cr1 = readl(base + CR1_OFFSET(stm32f4)); + + /* Disable uart-> enable fifo -> enable uart */ + cr1 &= ~(USART_CR1_RE | USART_CR1_TE | BIT(uart_enable_bit)); + + writel(cr1, base + CR1_OFFSET(stm32f4)); + + if (stm32->has_fifo) + cr1 |= USART_CR1_FIFOEN; + + cr1 &= ~(USART_CR1_PCE | USART_CR1_PS | USART_CR1_M1 | USART_CR1_M0); + + cr1 |= USART_CR1_RE | USART_CR1_TE | BIT(uart_enable_bit); + + writel(cr1, base + CR1_OFFSET(stm32f4)); +} + +static int stm32_serial_probe(struct device_d *dev) +{ + int ret; + struct console_device *cdev; + struct stm32_uart *stm32; + const char *devname; + struct resource *res; + struct stm32_uart_info *info; + + ret = dev_get_drvdata(dev, (const void **)&info); + if (ret) + return ret; + + stm32 = xzalloc(sizeof(*stm32)); + cdev = &stm32->cdev; + + res = dev_request_mem_resource(dev, 0); + if (IS_ERR(res)) { + ret = PTR_ERR(res); + goto err_free; + } + stm32->base = IOMEM(res->start); + + stm32->has_fifo = info->has_fifo; + stm32->stm32f4 = info->stm32f4; + stm32->uart_enable_bit = info->uart_enable_bit; + + stm32->clk = clk_get(dev, NULL); + if (IS_ERR(stm32->clk)) { + ret = PTR_ERR(stm32->clk); + dev_err(dev, "Failed to get UART clock %d\n", ret); + goto io_release; + } + + ret = clk_enable(stm32->clk); + if (ret) { + dev_err(dev, "Failed to enable UART clock %d\n", ret); + goto io_release; + } + + cdev->dev = dev; + cdev->tstc = stm32_serial_tstc; + cdev->putc = stm32_serial_putc; + cdev->getc = stm32_serial_getc; + cdev->flush = stm32_serial_flush; + cdev->setbrg = stm32_serial_setbaudrate; + + if (dev->device_node) { + devname = of_alias_get(dev->device_node); + if (devname) { + cdev->devname = xstrdup(devname); + cdev->devid = DEVICE_ID_SINGLE; + } + } + + stm32_serial_init(cdev); + + ret = console_register(cdev); + if (!ret) + return 0; + + clk_put(stm32->clk); +io_release: + release_region(res); +err_free: + free(stm32); + + return ret; +} + +struct stm32_uart_info stm32f4_info = { + .stm32f4 = true, + .uart_enable_bit = 13, + .has_fifo = false, +}; + +struct stm32_uart_info stm32f7_info = { + .uart_enable_bit = 0, + .stm32f4 = false, + .has_fifo = true, +}; + +struct stm32_uart_info stm32h7_info = { + .uart_enable_bit = 0, + .stm32f4 = false, + .has_fifo = true, +}; + +static struct of_device_id stm32_serial_dt_ids[] = { + { + .compatible = "st,stm32-uart", + .data = &stm32f4_info + }, { + .compatible = "st,stm32f7-uart", + .data = &stm32f7_info + }, { + .compatible = "st,stm32h7-uart", + .data = &stm32h7_info + }, { + } +}; + +static struct driver_d stm32_serial_driver = { + .name = "stm32-serial", + .probe = stm32_serial_probe, + .of_compatible = DRV_OF_COMPAT(stm32_serial_dt_ids), +}; +console_platform_driver(stm32_serial_driver); diff --git a/drivers/serial/serial_stm32.h b/drivers/serial/serial_stm32.h new file mode 100644 index 0000000000..dd3e930c93 --- /dev/null +++ b/drivers/serial/serial_stm32.h @@ -0,0 +1,48 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (C) 2016, STMicroelectronics - All Rights Reserved + * Author(s): Vikas Manocha, <vikas.manocha@st.com> for STMicroelectronics. + */ + +#ifndef _SERIAL_STM32_ +#define _SERIAL_STM32_ + +#define CR1_OFFSET(x) (x ? 0x0c : 0x00) +#define CR3_OFFSET(x) (x ? 0x14 : 0x08) +#define BRR_OFFSET(x) (x ? 0x08 : 0x0c) +#define ISR_OFFSET(x) (x ? 0x00 : 0x1c) + +#define ICR_OFFSET 0x20 + +/* + * STM32F4 has one Data Register (DR) for received or transmitted + * data, so map Receive Data Register (RDR) and Transmit Data + * Register (TDR) at the same offset + */ +#define RDR_OFFSET(x) (x ? 0x04 : 0x24) +#define TDR_OFFSET(x) (x ? 0x04 : 0x28) + +#define USART_CR1_FIFOEN BIT(29) +#define USART_CR1_M1 BIT(28) +#define USART_CR1_OVER8 BIT(15) +#define USART_CR1_M0 BIT(12) +#define USART_CR1_PCE BIT(10) +#define USART_CR1_PS BIT(9) +#define USART_CR1_TE BIT(3) +#define USART_CR1_RE BIT(2) + +#define USART_CR3_OVRDIS BIT(12) + +#define USART_ISR_TXE BIT(7) +#define USART_ISR_RXNE BIT(5) +#define USART_ISR_ORE BIT(3) +#define USART_ISR_PE BIT(0) + +#define USART_BRR_F_MASK GENMASK(7, 0) +#define USART_BRR_M_SHIFT 4 +#define USART_BRR_M_MASK GENMASK(15, 4) + +#define USART_ICR_ORECF BIT(3) +#define USART_ICR_PCECF BIT(0) + +#endif diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig index 8ff3d18d4a..99eff1c8d2 100644 --- a/drivers/usb/Kconfig +++ b/drivers/usb/Kconfig @@ -7,21 +7,20 @@ menuconfig USB_HOST if USB_HOST -source drivers/usb/imx/Kconfig +source "drivers/usb/imx/Kconfig" source "drivers/usb/dwc3/Kconfig" -source drivers/usb/host/Kconfig +source "drivers/usb/host/Kconfig" -source drivers/usb/otg/Kconfig +source "drivers/usb/otg/Kconfig" -source drivers/usb/storage/Kconfig +source "drivers/usb/storage/Kconfig" source "drivers/usb/misc/Kconfig" endif -source drivers/usb/gadget/Kconfig - -source drivers/usb/musb/Kconfig +source "drivers/usb/gadget/Kconfig" +source "drivers/usb/musb/Kconfig" diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 39e5fe67d4..d01a016077 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -21,7 +21,6 @@ #include <init.h> #include <malloc.h> #include <errno.h> -#include <scsi.h> #include <usb/phy.h> #include <usb/usb.h> #include <usb/usb_defs.h> diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c index 7b008435fd..d29cd1328b 100644 --- a/drivers/usb/core/usb.c +++ b/drivers/usb/core/usb.c @@ -63,7 +63,6 @@ static int dev_count; static int dev_index; -static int asynch_allowed; static LIST_HEAD(host_list); LIST_HEAD(usb_device_list); @@ -98,7 +97,6 @@ int usb_register_host(struct usb_host *host) list_add_tail(&host->list, &host_list); host->busnum = host_busnum++; host->sem = 0; - asynch_allowed = 1; return 0; } @@ -559,16 +557,6 @@ void usb_rescan(void) pr_info("%d USB Device(s) found\n", dev_count); } -/* - * disables the asynch behaviour of the control message. This is used for data - * transfers that uses the exclusiv access to the control and bulk messages. - */ -void usb_disable_asynch(int disable) -{ - asynch_allowed = !disable; -} - - /*------------------------------------------------------------------- * Message wrappers. * @@ -597,10 +585,9 @@ int usb_submit_int_msg(struct usb_device *dev, unsigned long pipe, /* * submits a control message and waits for completion (at least timeout * 1ms) * If timeout is 0, we don't wait for completion (used as example to set and - * clear keyboards LEDs). For data transfers, (storage transfers) we don't - * allow control messages with 0 timeout, by previously resetting the flag - * asynch_allowed (usb_disable_asynch(1)). - * returns the transfered length if OK or -1 if error. The transfered length + * clear keyboards LEDs). + * + * Returns the transfered length if OK or -1 if error. The transfered length * and the current status are stored in the dev->act_len and dev->status. */ int usb_control_msg(struct usb_device *dev, unsigned int pipe, @@ -612,11 +599,6 @@ int usb_control_msg(struct usb_device *dev, unsigned int pipe, int ret; struct devrequest *setup_packet = dev->setup_packet; - if ((timeout == 0) && (!asynch_allowed)) { - /* request for a asynch control pipe is not allowed */ - return -1; - } - ret = usb_host_acquire(host); if (ret) return ret; diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 2e7031a348..60fd6318db 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -663,6 +663,25 @@ static void dwc3_check_params(struct dwc3 *dwc) } } +static void dwc3_coresoft_reset(struct dwc3 *dwc) +{ + u32 reg; + + reg = dwc3_readl(dwc->regs, DWC3_GCTL); + reg |= DWC3_GCTL_CORESOFTRESET; + dwc3_writel(dwc->regs, DWC3_GCTL, reg); + + /* + * Similar reset sequence in U-Boot has a 100ms delay here. In + * practice reset sequence seem to work as expected even + * without a delay. + */ + + reg = dwc3_readl(dwc->regs, DWC3_GCTL); + reg &= ~DWC3_GCTL_CORESOFTRESET; + dwc3_writel(dwc->regs, DWC3_GCTL, reg); +} + static int dwc3_probe(struct device_d *dev) { struct dwc3 *dwc; @@ -695,6 +714,8 @@ static int dwc3_probe(struct device_d *dev) if (ret) return ret; + dwc3_coresoft_reset(dwc); + dwc3_cache_hwparams(dwc); ret = dwc3_core_init(dwc); diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c index 4140991340..48ccee2072 100644 --- a/drivers/usb/storage/transport.c +++ b/drivers/usb/storage/transport.c @@ -24,8 +24,6 @@ #include <errno.h> #include <dma.h> -#undef USB_STOR_DEBUG - #include "usb.h" #include "transport.h" @@ -62,6 +60,7 @@ static int usb_stor_Bulk_clear_endpt_stall(struct us_data *us, unsigned int pipe /* Determine what the maximum LUN supported is */ int usb_stor_Bulk_max_lun(struct us_data *us) { + struct device_d *dev = &us->pusb_dev->dev; int len, ret = 0; unsigned char *iobuf = dma_alloc(1); @@ -73,8 +72,8 @@ int usb_stor_Bulk_max_lun(struct us_data *us) USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE, 0, us->ifnum, iobuf, 1, USB_CNTL_TIMEOUT); - US_DEBUGP("GetMaxLUN command result is %d, data is %d\n", - len, (int)iobuf[0]); + dev_dbg(dev, "GetMaxLUN command result is %d, data is %d\n", + len, (int)iobuf[0]); /* if we have a successful request, return the result */ if (len > 0) @@ -92,8 +91,12 @@ int usb_stor_Bulk_max_lun(struct us_data *us) return ret; } -int usb_stor_Bulk_transport(ccb *srb, struct us_data *us) +int usb_stor_Bulk_transport(struct us_blk_dev *usb_blkdev, + const u8 *cmd, u8 cmdlen, + void *data, u32 datalen) { + struct us_data *us = usb_blkdev->us; + struct device_d *dev = &us->pusb_dev->dev; struct bulk_cb_wrap cbw; struct bulk_cs_wrap csw; int actlen, data_actlen; @@ -101,30 +104,28 @@ int usb_stor_Bulk_transport(ccb *srb, struct us_data *us) unsigned int residue; unsigned int pipein = usb_rcvbulkpipe(us->pusb_dev, us->recv_bulk_ep); unsigned int pipeout = usb_sndbulkpipe(us->pusb_dev, us->send_bulk_ep); - int dir_in = US_DIRECTION(srb->cmd[0]); - - srb->trans_bytes = 0; + int dir_in = US_DIRECTION(cmd[0]); /* set up the command wrapper */ cbw.Signature = cpu_to_le32(US_BULK_CB_SIGN); - cbw.DataTransferLength = cpu_to_le32(srb->datalen); + cbw.DataTransferLength = cpu_to_le32(datalen); cbw.Flags = (dir_in ? US_BULK_FLAG_IN : US_BULK_FLAG_OUT); cbw.Tag = ++cbw_tag; - cbw.Lun = srb->lun; - cbw.Length = srb->cmdlen; + cbw.Lun = usb_blkdev->lun; + cbw.Length = cmdlen; /* copy the command payload */ - memcpy(cbw.CDB, srb->cmd, cbw.Length); + memcpy(cbw.CDB, cmd, cbw.Length); /* send it to out endpoint */ - US_DEBUGP("Bulk Command S 0x%x T 0x%x L %d F %d Trg %d LUN %d CL %d\n", - le32_to_cpu(cbw.Signature), cbw.Tag, - le32_to_cpu(cbw.DataTransferLength), cbw.Flags, - (cbw.Lun >> 4), (cbw.Lun & 0x0F), - cbw.Length); + dev_dbg(dev, "Bulk Command S 0x%x T 0x%x L %d F %d Trg %d LUN %d CL %d\n", + le32_to_cpu(cbw.Signature), cbw.Tag, + le32_to_cpu(cbw.DataTransferLength), cbw.Flags, + (cbw.Lun >> 4), (cbw.Lun & 0x0F), + cbw.Length); result = usb_bulk_msg(us->pusb_dev, pipeout, &cbw, US_BULK_CB_WRAP_LEN, &actlen, USB_BULK_TO); - US_DEBUGP("Bulk command transfer result=%d\n", result); + dev_dbg(dev, "Bulk command transfer result=%d\n", result); if (result < 0) { usb_stor_Bulk_reset(us); return USB_STOR_TRANSPORT_FAILED; @@ -136,36 +137,36 @@ int usb_stor_Bulk_transport(ccb *srb, struct us_data *us) mdelay(1); data_actlen = 0; - if (srb->datalen) { + if (datalen) { unsigned int pipe = dir_in ? pipein : pipeout; - result = usb_bulk_msg(us->pusb_dev, pipe, srb->pdata, - srb->datalen, &data_actlen, USB_BULK_TO); - US_DEBUGP("Bulk data transfer result 0x%x\n", result); + result = usb_bulk_msg(us->pusb_dev, pipe, data, + datalen, &data_actlen, USB_BULK_TO); + dev_dbg(dev, "Bulk data transfer result 0x%x\n", result); /* special handling of STALL in DATA phase */ if ((result < 0) && (us->pusb_dev->status & USB_ST_STALLED)) { - US_DEBUGP("DATA: stall\n"); + dev_dbg(dev, "DATA: stall\n"); /* clear the STALL on the endpoint */ result = usb_stor_Bulk_clear_endpt_stall(us, pipe); } if (result < 0) { - US_DEBUGP("Device status: %lx\n", us->pusb_dev->status); + dev_dbg(dev, "Device status: %lx\n", us->pusb_dev->status); usb_stor_Bulk_reset(us); return USB_STOR_TRANSPORT_FAILED; } } /* STATUS phase + error handling */ - US_DEBUGP("Attempting to get CSW...\n"); + dev_dbg(dev, "Attempting to get CSW...\n"); result = usb_bulk_msg(us->pusb_dev, pipein, &csw, US_BULK_CS_WRAP_LEN, &actlen, USB_BULK_TO); /* did the endpoint stall? */ if ((result < 0) && (us->pusb_dev->status & USB_ST_STALLED)) { - US_DEBUGP("STATUS: stall\n"); + dev_dbg(dev, "STATUS: stall\n"); /* clear the STALL on the endpoint */ result = usb_stor_Bulk_clear_endpt_stall(us, pipein); if (result >= 0) { - US_DEBUGP("Attempting to get CSW...\n"); + dev_dbg(dev, "Attempting to get CSW...\n"); result = usb_bulk_msg(us->pusb_dev, pipein, &csw, US_BULK_CS_WRAP_LEN, &actlen, USB_BULK_TO); @@ -173,36 +174,35 @@ int usb_stor_Bulk_transport(ccb *srb, struct us_data *us) } if (result < 0) { - US_DEBUGP("Device status: %lx\n", us->pusb_dev->status); + dev_dbg(dev, "Device status: %lx\n", us->pusb_dev->status); usb_stor_Bulk_reset(us); return USB_STOR_TRANSPORT_FAILED; } /* check bulk status */ residue = le32_to_cpu(csw.Residue); - US_DEBUGP("Bulk Status S 0x%x T 0x%x R %u Stat 0x%x\n", - le32_to_cpu(csw.Signature), csw.Tag, residue, csw.Status); + dev_dbg(dev, "Bulk Status S 0x%x T 0x%x R %u Stat 0x%x\n", + le32_to_cpu(csw.Signature), csw.Tag, residue, csw.Status); if (csw.Signature != cpu_to_le32(US_BULK_CS_SIGN)) { - US_DEBUGP("Bad CSW signature\n"); + dev_dbg(dev, "Bad CSW signature\n"); usb_stor_Bulk_reset(us); return USB_STOR_TRANSPORT_FAILED; } else if (csw.Tag != cbw_tag) { - US_DEBUGP("Mismatching tag\n"); + dev_dbg(dev, "Mismatching tag\n"); usb_stor_Bulk_reset(us); return USB_STOR_TRANSPORT_FAILED; } else if (csw.Status >= US_BULK_STAT_PHASE) { - US_DEBUGP("Status >= phase\n"); + dev_dbg(dev, "Status >= phase\n"); usb_stor_Bulk_reset(us); return USB_STOR_TRANSPORT_ERROR; - } else if (residue > srb->datalen) { - US_DEBUGP("residue (%uB) > req data (%luB)\n", - residue, srb->datalen); + } else if (residue > datalen) { + dev_dbg(dev, "residue (%uB) > req data (%uB)\n", + residue, datalen); return USB_STOR_TRANSPORT_FAILED; } else if (csw.Status == US_BULK_STAT_FAIL) { - US_DEBUGP("FAILED\n"); + dev_dbg(dev, "FAILED\n"); return USB_STOR_TRANSPORT_FAILED; } - srb->trans_bytes = min(srb->datalen - residue, (ulong)data_actlen); return 0; } @@ -213,11 +213,12 @@ int usb_stor_Bulk_transport(ccb *srb, struct us_data *us) */ int usb_stor_Bulk_reset(struct us_data *us) { + struct device_d *dev = &us->pusb_dev->dev; int result; int result2; unsigned int pipe; - US_DEBUGP("%s called\n", __func__); + dev_dbg(dev, "%s called\n", __func__); /* issue the command */ result = usb_control_msg(us->pusb_dev, @@ -226,24 +227,24 @@ int usb_stor_Bulk_reset(struct us_data *us) USB_TYPE_CLASS | USB_RECIP_INTERFACE, 0, us->ifnum, 0, 0, USB_CNTL_TIMEOUT); if ((result < 0) && (us->pusb_dev->status & USB_ST_STALLED)) { - US_DEBUGP("Soft reset stalled: %d\n", result); + dev_dbg(dev, "Soft reset stalled: %d\n", result); return result; } mdelay(150); /* clear the bulk endpoints halt */ - US_DEBUGP("Soft reset: clearing %s endpoint halt\n", "bulk-in"); + dev_dbg(dev, "Soft reset: clearing %s endpoint halt\n", "bulk-in"); pipe = usb_rcvbulkpipe(us->pusb_dev, us->recv_bulk_ep); result = usb_clear_halt(us->pusb_dev, pipe); mdelay(150); - US_DEBUGP("Soft reset: clearing %s endpoint halt\n", "bulk-out"); + dev_dbg(dev, "Soft reset: clearing %s endpoint halt\n", "bulk-out"); pipe = usb_sndbulkpipe(us->pusb_dev, us->send_bulk_ep); result2 = usb_clear_halt(us->pusb_dev, pipe); mdelay(150); if (result >= 0) result = result2; - US_DEBUGP("Soft reset %s\n", ((result < 0) ? "failed" : "done")); + dev_dbg(dev, "Soft reset %s\n", ((result < 0) ? "failed" : "done")); return result; } diff --git a/drivers/usb/storage/transport.h b/drivers/usb/storage/transport.h index bc8a7693f8..22d7dea3f5 100644 --- a/drivers/usb/storage/transport.h +++ b/drivers/usb/storage/transport.h @@ -84,7 +84,7 @@ struct bulk_cs_wrap { struct us_data; -extern int usb_stor_Bulk_transport(ccb *, struct us_data *); +extern trans_cmnd usb_stor_Bulk_transport; extern int usb_stor_Bulk_max_lun(struct us_data *); extern int usb_stor_Bulk_reset(struct us_data *); diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c index 8218bb2a71..fda24d6167 100644 --- a/drivers/usb/storage/usb.c +++ b/drivers/usb/storage/usb.c @@ -26,164 +26,176 @@ #include <usb/usb.h> #include <usb/usb_defs.h> -#undef USB_STOR_DEBUG +#include <asm/unaligned.h> #include "usb.h" #include "transport.h" -static LIST_HEAD(us_blkdev_list); - - /*********************************************************************** * USB Storage routines ***********************************************************************/ -static int usb_stor_inquiry(ccb *srb, struct us_data *us) +#define USB_STOR_NO_REQUEST_SENSE -1 + +static int usb_stor_request_sense(struct us_blk_dev *usb_blkdev) { - int retries, result; + struct us_data *us = usb_blkdev->us; + struct device_d *dev = &us->pusb_dev->dev; + u8 cmd[6]; + const u8 datalen = 18; + u8 *data = xzalloc(datalen); - srb->datalen = min(128UL, srb->datalen); - if (srb->datalen < 5) { - US_DEBUGP("SCSI_INQUIRY: invalid data buffer size\n"); - return -EINVAL; - } + dev_dbg(dev, "SCSI_REQ_SENSE\n"); - retries = 3; - do { - US_DEBUGP("SCSI_INQUIRY\n"); - memset(&srb->cmd[0], 0, 6); - srb->cmdlen = 6; - srb->cmd[0] = SCSI_INQUIRY; - srb->cmd[3] = (u8)(srb->datalen >> 8); - srb->cmd[4] = (u8)(srb->datalen >> 0); - result = us->transport(srb, us); - US_DEBUGP("SCSI_INQUIRY returns %d\n", result); - } while ((result != USB_STOR_TRANSPORT_GOOD) && retries--); - - return (result != USB_STOR_TRANSPORT_GOOD) ? -EIO : 0; -} + memset(cmd, 0, sizeof(cmd)); + cmd[0] = SCSI_REQ_SENSE; + cmd[4] = datalen; + us->transport(usb_blkdev, cmd, sizeof(cmd), data, datalen); + dev_dbg(dev, "Request Sense returned %02X %02X %02X\n", + data[2], data[12], data[13]); -static int usb_stor_request_sense(ccb *srb, struct us_data *us) -{ - unsigned char *pdata = srb->pdata; - unsigned long datalen = srb->datalen; - - US_DEBUGP("SCSI_REQ_SENSE\n"); - srb->pdata = &srb->sense_buf[0]; - srb->datalen = 18; - memset(&srb->cmd[0], 0, 6); - srb->cmdlen = 6; - srb->cmd[0] = SCSI_REQ_SENSE; - srb->cmd[4] = (u8)(srb->datalen >> 0); - us->transport(srb, us); - US_DEBUGP("Request Sense returned %02X %02X %02X\n", - srb->sense_buf[2], srb->sense_buf[12], srb->sense_buf[13]); - srb->pdata = pdata; - srb->datalen = datalen; + free(data); return 0; } -static int usb_stor_test_unit_ready(ccb *srb, struct us_data *us) +static const char *usb_stor_opcode_name(u8 opcode) { - int retries, result; - - retries = 10; - do { - US_DEBUGP("SCSI_TST_U_RDY\n"); - memset(&srb->cmd[0], 0, 12); - srb->cmdlen = 12; - srb->cmd[0] = SCSI_TST_U_RDY; - srb->datalen = 0; - result = us->transport(srb, us); - US_DEBUGP("SCSI_TST_U_RDY returns %d\n", result); - if (result == USB_STOR_TRANSPORT_GOOD) - return 0; - usb_stor_request_sense(srb, us); - mdelay(100); - } while (retries--); - - return -1; + switch (opcode) { + case SCSI_INQUIRY: + return "SCSI_INQUIRY"; + case SCSI_TST_U_RDY: + return "SCSI_TST_U_RDY"; + case SCSI_RD_CAPAC: + return "SCSI_RD_CAPAC"; + case SCSI_READ10: + return "SCSI_READ10"; + case SCSI_WRITE10: + return "SCSI_WRITE10"; + }; + + return "UNKNOWN"; } -static int usb_stor_read_capacity(ccb *srb, struct us_data *us) +static int usb_stor_transport(struct us_blk_dev *usb_blkdev, + const u8 *cmd, u8 cmdlen, + void *data, u32 datalen, + int retries, int request_sense_delay_ms) { - int retries, result; + struct us_data *us = usb_blkdev->us; + struct device_d *dev = &us->pusb_dev->dev; + int i, ret; + - if (srb->datalen < 8) { - US_DEBUGP("SCSI_RD_CAPAC: invalid data buffer size\n"); - return -EINVAL; + for (i = 0; i < retries; i++) { + dev_dbg(dev, "%s\n", usb_stor_opcode_name(cmd[0])); + ret = us->transport(usb_blkdev, cmd, cmdlen, data, datalen); + dev_dbg(dev, "%s returns %d\n", usb_stor_opcode_name(cmd[0]), + ret); + if (ret == USB_STOR_TRANSPORT_GOOD) + return 0; + + if (request_sense_delay_ms == USB_STOR_NO_REQUEST_SENSE) + continue; + + usb_stor_request_sense(usb_blkdev); + + if (request_sense_delay_ms) + mdelay(request_sense_delay_ms); } - retries = 3; - do { - US_DEBUGP("SCSI_RD_CAPAC\n"); - memset(&srb->cmd[0], 0, 10); - srb->cmdlen = 10; - srb->cmd[0] = SCSI_RD_CAPAC; - srb->datalen = 8; - result = us->transport(srb, us); - US_DEBUGP("SCSI_RD_CAPAC returns %d\n", result); - } while ((result != USB_STOR_TRANSPORT_GOOD) && retries--); - - return (result != USB_STOR_TRANSPORT_GOOD) ? -EIO : 0; + return -EIO; } -static int usb_stor_read_10(ccb *srb, struct us_data *us, - unsigned long start, unsigned short blocks) +static int usb_stor_inquiry(struct us_blk_dev *usb_blkdev) { - int retries, result; - - retries = 2; - do { - US_DEBUGP("SCSI_READ10: start %lx blocks %x\n", start, blocks); - memset(&srb->cmd[0], 0, 10); - srb->cmdlen = 10; - srb->cmd[0] = SCSI_READ10; - srb->cmd[2] = (u8)(start >> 24); - srb->cmd[3] = (u8)(start >> 16); - srb->cmd[4] = (u8)(start >> 8); - srb->cmd[5] = (u8)(start >> 0); - srb->cmd[7] = (u8)(blocks >> 8); - srb->cmd[8] = (u8)(blocks >> 0); - result = us->transport(srb, us); - US_DEBUGP("SCSI_READ10 returns %d\n", result); - if (result == USB_STOR_TRANSPORT_GOOD) - return 0; - usb_stor_request_sense(srb, us); - } while (retries--); + struct device_d *dev = &usb_blkdev->us->pusb_dev->dev; + int ret; + u8 cmd[6]; + const u16 datalen = 36; + u8 *data = xzalloc(datalen); + + memset(cmd, 0, sizeof(cmd)); + cmd[0] = SCSI_INQUIRY; + put_unaligned_be16(datalen, &cmd[3]); + + ret = usb_stor_transport(usb_blkdev, cmd, sizeof(cmd), data, datalen, + 3, USB_STOR_NO_REQUEST_SENSE); + if (ret < 0) { + ret = -ENODEV; + goto exit; + } - return -EIO; + dev_dbg(dev, "Peripheral type: %x, removable: %x\n", + data[0], (data[1] >> 7)); + dev_dbg(dev, "ISO ver: %x, resp format: %x\n", + data[2], data[3]); + dev_dbg(dev, "Vendor/product/rev: %28s\n", + &data[8]); + // TODO: process and store device info + +exit: + free(data); + return ret; } -static int usb_stor_write_10(ccb *srb, struct us_data *us, - unsigned long start, unsigned short blocks) +static int usb_stor_test_unit_ready(struct us_blk_dev *usb_blkdev) { - int retries, result; - - retries = 2; - do { - US_DEBUGP("SCSI_WRITE10: start %lx blocks %x\n", start, blocks); - memset(&srb->cmd[0], 0, 10); - srb->cmdlen = 10; - srb->cmd[0] = SCSI_WRITE10; - srb->cmd[2] = (u8)(start >> 24); - srb->cmd[3] = (u8)(start >> 16); - srb->cmd[4] = (u8)(start >> 8); - srb->cmd[5] = (u8)(start >> 0); - srb->cmd[7] = (u8)(blocks >> 8); - srb->cmd[8] = (u8)(blocks >> 0); - result = us->transport(srb, us); - US_DEBUGP("SCSI_WRITE10 returns %d\n", result); - if (result == USB_STOR_TRANSPORT_GOOD) - return 0; - usb_stor_request_sense(srb, us); - } while (retries--); + u8 cmd[12]; + int ret; + + memset(cmd, 0, sizeof(cmd)); + cmd[0] = SCSI_TST_U_RDY; - return us->transport(srb, us); + ret = usb_stor_transport(usb_blkdev, cmd, sizeof(cmd), NULL, 0, + 10, 100); + if (ret < 0) + return -ENODEV; + + return 0; } +static int usb_stor_read_capacity(struct us_blk_dev *usb_blkdev, + u32 *last_lba, u32 *block_length) +{ + struct device_d *dev = &usb_blkdev->us->pusb_dev->dev; + const u32 datalen = 8; + u32 *data = xzalloc(datalen); + u8 cmd[10]; + int ret; + + memset(cmd, 0, sizeof(cmd)); + cmd[0] = SCSI_RD_CAPAC; + + ret = usb_stor_transport(usb_blkdev, cmd, sizeof(cmd), data, datalen, + 3, USB_STOR_NO_REQUEST_SENSE); + if (ret < 0) + goto exit; + + dev_dbg(dev, "Read Capacity returns: 0x%x, 0x%x\n", + data[0], data[1]); + *last_lba = be32_to_cpu(data[0]); + *block_length = be32_to_cpu(data[1]); + +exit: + free(data); + return ret; +} + +static int usb_stor_io_10(struct us_blk_dev *usb_blkdev, u8 opcode, + u32 start, u8 *data, u16 blocks) +{ + u8 cmd[10]; + + memset(cmd, 0, sizeof(cmd)); + cmd[0] = opcode; + put_unaligned_be32(start, &cmd[2]); + put_unaligned_be16(blocks, &cmd[7]); + + return usb_stor_transport(usb_blkdev, cmd, sizeof(cmd), data, + blocks * SECTOR_SIZE, 2, 0); +} /*********************************************************************** * Disk driver interface @@ -191,101 +203,59 @@ static int usb_stor_write_10(ccb *srb, struct us_data *us, #define US_MAX_IO_BLK 32 -#define to_usb_mass_storage(x) container_of((x), struct us_blk_dev, blk) - -enum { io_rd, io_wr }; - /* Read / write a chunk of sectors on media */ -static int usb_stor_blk_io(int io_op, struct block_device *disk_dev, - int sector_start, int sector_count, void *buffer) +static int usb_stor_blk_io(struct block_device *disk_dev, + int sector_start, int sector_count, void *buffer, + bool read) { - struct us_blk_dev *pblk_dev = to_usb_mass_storage(disk_dev); + struct us_blk_dev *pblk_dev = container_of(disk_dev, + struct us_blk_dev, + blk); struct us_data *us = pblk_dev->us; - ccb us_ccb; - unsigned sectors_done; - - if (sector_count == 0) - return 0; - - /* check for unsupported block size */ - if (pblk_dev->blk.blockbits != SECTOR_SHIFT) { - US_DEBUGP("%s: unsupported block shift %d\n", - __func__, pblk_dev->blk.blockbits); - return -EINVAL; - } - - /* check for invalid sector_start */ - if (sector_start >= pblk_dev->blk.num_blocks || sector_start > (ulong)-1) { - US_DEBUGP("%s: start sector %d too large\n", - __func__, sector_start); - return -EINVAL; - } - - us_ccb.lun = pblk_dev->lun; - usb_disable_asynch(1); + struct device_d *dev = &us->pusb_dev->dev; /* ensure unit ready */ - US_DEBUGP("Testing for unit ready\n"); - if (usb_stor_test_unit_ready(&us_ccb, us)) { - US_DEBUGP("Device NOT ready\n"); - usb_disable_asynch(0); + dev_dbg(dev, "Testing for unit ready\n"); + if (usb_stor_test_unit_ready(pblk_dev)) { + dev_dbg(dev, "Device NOT ready\n"); return -EIO; } - /* possibly limit the amount of I/O data */ - if (sector_count > INT_MAX) { - sector_count = INT_MAX; - US_DEBUGP("Restricting I/O to %u blocks\n", sector_count); - } - if (sector_start + sector_count > pblk_dev->blk.num_blocks) { - sector_count = pblk_dev->blk.num_blocks - sector_start; - US_DEBUGP("Restricting I/O to %u blocks\n", sector_count); - } - /* read / write the requested data */ - US_DEBUGP("%s %u block(s), starting from %d\n", - ((io_op == io_rd) ? "Read" : "Write"), - sector_count, sector_start); - sectors_done = 0; + dev_dbg(dev, "%s %u block(s), starting from %d\n", + read ? "Read" : "Write", + sector_count, sector_start); + while (sector_count > 0) { - int result; unsigned n = min(sector_count, US_MAX_IO_BLK); - us_ccb.pdata = buffer + (sectors_done * SECTOR_SIZE); - us_ccb.datalen = n * SECTOR_SIZE; - if (io_op == io_rd) - result = usb_stor_read_10(&us_ccb, us, - (ulong)sector_start, n); - else - result = usb_stor_write_10(&us_ccb, us, - (ulong)sector_start, n); - if (result != 0) { - US_DEBUGP("I/O error at sector %d\n", sector_start); + + if (usb_stor_io_10(pblk_dev, + read ? SCSI_READ10 : SCSI_WRITE10, + sector_start, + buffer, n)) { + dev_dbg(dev, "I/O error at sector %d\n", sector_start); break; } sector_start += n; sector_count -= n; - sectors_done += n; + buffer += n * SECTOR_SIZE; } - usb_disable_asynch(0); - - US_DEBUGP("Successful I/O of %d blocks\n", sectors_done); - - return (sector_count != 0) ? -EIO : 0; + return sector_count ? -EIO : 0; } /* Write a chunk of sectors to media */ static int __maybe_unused usb_stor_blk_write(struct block_device *blk, const void *buffer, int block, int num_blocks) { - return usb_stor_blk_io(io_wr, blk, block, num_blocks, (void *)buffer); + return usb_stor_blk_io(blk, block, num_blocks, (void *)buffer, false); } /* Read a chunk of sectors from media */ static int usb_stor_blk_read(struct block_device *blk, void *buffer, int block, int num_blocks) { - return usb_stor_blk_io(io_rd, blk, block, num_blocks, buffer); + return usb_stor_blk_io(blk, block, num_blocks, buffer, true); } static struct block_device_ops usb_mass_storage_ops = { @@ -299,82 +269,61 @@ static struct block_device_ops usb_mass_storage_ops = { * Block device routines ***********************************************************************/ -static unsigned char us_io_buf[512]; - -static int usb_limit_blk_cnt(unsigned cnt) -{ - if (cnt > 0x7fffffff) { - pr_warn("Limiting device size due to 31 bit contraints\n"); - return 0x7fffffff; - } - - return (int)cnt; -} - /* Prepare a disk device */ static int usb_stor_init_blkdev(struct us_blk_dev *pblk_dev) { struct us_data *us = pblk_dev->us; - ccb us_ccb; - unsigned long *pcap; - int result = 0; - - us_ccb.pdata = us_io_buf; - us_ccb.lun = pblk_dev->lun; - - pblk_dev->blk.num_blocks = 0; - usb_disable_asynch(1); + struct device_d *dev = &us->pusb_dev->dev; + u32 last_lba = 0, block_length = 0; + int result; /* get device info */ - US_DEBUGP("Reading device info\n"); - us_ccb.datalen = 36; - if (usb_stor_inquiry(&us_ccb, us)) { - US_DEBUGP("Cannot read device info\n"); - result = -ENODEV; - goto Exit; + dev_dbg(dev, "Reading device info\n"); + + result = usb_stor_inquiry(pblk_dev); + if (result) { + dev_dbg(dev, "Cannot read device info\n"); + return result; } - US_DEBUGP("Peripheral type: %x, removable: %x\n", - us_io_buf[0], (us_io_buf[1] >> 7)); - US_DEBUGP("ISO ver: %x, resp format: %x\n", us_io_buf[2], us_io_buf[3]); - US_DEBUGP("Vendor/product/rev: %28s\n", &us_io_buf[8]); - // TODO: process and store device info /* ensure unit ready */ - US_DEBUGP("Testing for unit ready\n"); - us_ccb.datalen = 0; - if (usb_stor_test_unit_ready(&us_ccb, us)) { - US_DEBUGP("Device NOT ready\n"); - result = -ENODEV; - goto Exit; + dev_dbg(dev, "Testing for unit ready\n"); + + result = usb_stor_test_unit_ready(pblk_dev); + if (result) { + dev_dbg(dev, "Device NOT ready\n"); + return result; } /* read capacity */ - US_DEBUGP("Reading capacity\n"); - memset(us_ccb.pdata, 0, 8); - us_ccb.datalen = sizeof(us_io_buf); - if (usb_stor_read_capacity(&us_ccb, us) != 0) { - US_DEBUGP("Cannot read device capacity\n"); - result = -EIO; - goto Exit; + dev_dbg(dev, "Reading capacity\n"); + + result = usb_stor_read_capacity(pblk_dev, &last_lba, &block_length); + if (result < 0) { + dev_dbg(dev, "Cannot read device capacity\n"); + return result; } - pcap = (unsigned long *)us_ccb.pdata; - US_DEBUGP("Read Capacity returns: 0x%lx, 0x%lx\n", pcap[0], pcap[1]); - pblk_dev->blk.num_blocks = usb_limit_blk_cnt(be32_to_cpu(pcap[0]) + 1); - if (be32_to_cpu(pcap[1]) != SECTOR_SIZE) + + if (last_lba > INT_MAX - 1) { + last_lba = INT_MAX - 1; + dev_warn(dev, + "Limiting device size due to 31 bit contraints\n"); + } + + pblk_dev->blk.num_blocks = last_lba + 1; + if (block_length != SECTOR_SIZE) pr_warn("Support only %d bytes sectors\n", SECTOR_SIZE); pblk_dev->blk.blockbits = SECTOR_SHIFT; - US_DEBUGP("Capacity = 0x%x, blockshift = 0x%x\n", - pblk_dev->blk.num_blocks, pblk_dev->blk.blockbits); + dev_dbg(dev, "Capacity = 0x%x, blockshift = 0x%x\n", + pblk_dev->blk.num_blocks, pblk_dev->blk.blockbits); -Exit: - usb_disable_asynch(0); - return result; + return 0; } /* Create and register a disk device for the specified LUN */ -static int usb_stor_add_blkdev(struct us_data *us, struct device_d *dev, - unsigned char lun) +static int usb_stor_add_blkdev(struct us_data *us, unsigned char lun) { + struct device_d *dev = &us->pusb_dev->dev; struct us_blk_dev *pblk_dev; int result; @@ -412,12 +361,12 @@ static int usb_stor_add_blkdev(struct us_data *us, struct device_d *dev, dev_warn(dev, "No partition table found\n"); list_add_tail(&pblk_dev->list, &us->blk_dev_list); - US_DEBUGP("USB disk device successfully added\n"); + dev_dbg(dev, "USB disk device successfully added\n"); return 0; BadDevice: - US_DEBUGP("%s failed with %d\n", __func__, result); + dev_dbg(dev, "%s failed with %d\n", __func__, result); free(pblk_dev); return result; } @@ -429,6 +378,7 @@ BadDevice: /* Get the transport settings */ static void get_transport(struct us_data *us) { + struct device_d *dev = &us->pusb_dev->dev; switch (us->protocol) { case US_PR_BULK: us->transport_name = "Bulk"; @@ -437,17 +387,17 @@ static void get_transport(struct us_data *us) break; } - US_DEBUGP("Transport: %s\n", us->transport_name); + dev_dbg(dev, "Transport: %s\n", us->transport_name); } /* Get the endpoint settings */ static int get_pipes(struct us_data *us, struct usb_interface *intf) { + struct device_d *dev = &us->pusb_dev->dev; unsigned int i; struct usb_endpoint_descriptor *ep; struct usb_endpoint_descriptor *ep_in = NULL; struct usb_endpoint_descriptor *ep_out = NULL; - struct usb_endpoint_descriptor *ep_int = NULL; /* * Find the first endpoint of each type we need. @@ -468,44 +418,38 @@ static int get_pipes(struct us_data *us, struct usb_interface *intf) ep_out = ep; } } - else if (USB_EP_IS_INT_IN(ep)) { - if (!ep_int) - ep_int = ep; - } } - if (!ep_in || !ep_out || (us->protocol == US_PR_CBI && !ep_int)) { - US_DEBUGP("Endpoint sanity check failed! Rejecting dev.\n"); + if (!ep_in || !ep_out || us->protocol == US_PR_CBI) { + dev_dbg(dev, "Endpoint sanity check failed! Rejecting dev.\n"); return -EIO; } /* Store the pipe values */ us->send_bulk_ep = USB_EP_NUM(ep_out); us->recv_bulk_ep = USB_EP_NUM(ep_in); - if (ep_int) { - us->recv_intr_ep = USB_EP_NUM(ep_int); - us->ep_bInterval = ep_int->bInterval; - } + return 0; } /* Scan device's LUNs, registering a disk device for each LUN */ static int usb_stor_scan(struct usb_device *usbdev, struct us_data *us) { + struct device_d *dev = &usbdev->dev; unsigned char lun; int num_devs = 0; /* obtain the max LUN */ - us->max_lun = 0; + us->max_lun = 1; if (us->protocol == US_PR_BULK) us->max_lun = usb_stor_Bulk_max_lun(us); /* register a disk device for each active LUN */ for (lun=0; lun<=us->max_lun; lun++) { - if (usb_stor_add_blkdev(us, &usbdev->dev, lun) == 0) + if (usb_stor_add_blkdev(us, lun) == 0) num_devs++; } - US_DEBUGP("Found %d block devices on %s\n", num_devs, usbdev->dev.name); + dev_dbg(dev, "Found %d block devices on %s\n", num_devs, usbdev->dev.name); return num_devs ? 0 : -ENODEV; } @@ -514,12 +458,13 @@ static int usb_stor_scan(struct usb_device *usbdev, struct us_data *us) static int usb_stor_probe(struct usb_device *usbdev, const struct usb_device_id *id) { + struct device_d *dev = &usbdev->dev; struct us_data *us; int result; int ifno; struct usb_interface *intf; - US_DEBUGP("Supported USB Mass Storage device detected\n"); + dev_dbg(dev, "Supported USB Mass Storage device detected\n"); /* scan usbdev interfaces again to find one that we can handle */ for (ifno=0; ifno<usbdev->config.no_of_if; ifno++) { @@ -538,19 +483,14 @@ static int usb_stor_probe(struct usb_device *usbdev, if (result) return result; - US_DEBUGP("Selected interface %d\n", (int)intf->desc.bInterfaceNumber); + dev_dbg(dev, "Selected interface %d\n", (int)intf->desc.bInterfaceNumber); /* allocate us_data structure */ - us = (struct us_data *)malloc(sizeof(struct us_data)); - if (!us) - return -ENOMEM; - memset(us, 0, sizeof(struct us_data)); + us = xzalloc(sizeof(*us)); /* initialize the us_data structure */ us->pusb_dev = usbdev; - us->flags = 0; us->ifnum = intf->desc.bInterfaceNumber; - us->subclass = intf->desc.bInterfaceSubClass; us->protocol = intf->desc.bInterfaceProtocol; INIT_LIST_HEAD(&us->blk_dev_list); @@ -571,7 +511,7 @@ static int usb_stor_probe(struct usb_device *usbdev, return 0; BadDevice: - US_DEBUGP("%s failed with %d\n", __func__, result); + dev_dbg(dev, "%s failed with %d\n", __func__, result); free(us); return result; } diff --git a/drivers/usb/storage/usb.h b/drivers/usb/storage/usb.h index e649d53361..cd4904f03b 100644 --- a/drivers/usb/storage/usb.h +++ b/drivers/usb/storage/usb.h @@ -28,13 +28,6 @@ #include <linux/list.h> -#ifdef USB_STOR_DEBUG -#define US_DEBUGP(fmt, args...) printf(fmt , ##args) -#else -#define US_DEBUGP(fmt, args...) -#endif - - /* some defines, similar to ch9.h */ #define USB_EP_NUM(epd) \ ((epd)->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK) @@ -51,32 +44,30 @@ struct us_data; +struct us_blk_dev; -typedef int (*trans_cmnd)(ccb *cb, struct us_data *data); +typedef int (trans_cmnd)(struct us_blk_dev *usb_blkdev, + const u8 *cmd, u8 cmdlen, + void *data, u32 datalen); typedef int (*trans_reset)(struct us_data *data); /* one us_data object allocated per usb storage device */ struct us_data { struct usb_device *pusb_dev; /* this usb_device */ - unsigned int flags; /* from filter */ unsigned char send_bulk_ep; /* used endpoints */ unsigned char recv_bulk_ep; - unsigned char recv_intr_ep; unsigned char ifnum; /* interface number */ - unsigned char subclass; unsigned char protocol; unsigned char max_lun; - unsigned char ep_bInterval; char *transport_name; - trans_cmnd transport; /* transport function */ + trans_cmnd *transport; /* transport function */ trans_reset transport_reset;/* transport device reset */ /* SCSI interfaces */ - ccb *srb; /* current srb */ struct list_head blk_dev_list; }; diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index 79de32cf8e..a26bace176 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -96,7 +96,7 @@ config DRIVER_VIDEO_BCM283X help Add support for the BCM283X/VideoCore frame buffer device. -source drivers/video/imx-ipu-v3/Kconfig +source "drivers/video/imx-ipu-v3/Kconfig" config DRIVER_VIDEO_SIMPLEFB bool "Simple framebuffer support" diff --git a/drivers/video/of_display_timing.c b/drivers/video/of_display_timing.c index 20f9354a18..17d8823c46 100644 --- a/drivers/video/of_display_timing.c +++ b/drivers/video/of_display_timing.c @@ -14,7 +14,8 @@ void display_timings_release(struct display_timings *disp) { - free(disp->modes); + if (disp->modes) + free(disp->modes); free(disp); } EXPORT_SYMBOL_GPL(display_timings_release); @@ -43,7 +44,7 @@ static int parse_timing_property(const struct device_node *np, const char *name, } cells = length / sizeof(u32); - if (cells == 1) { + if ((cells == 1) || (cells == 3)) { ret = of_property_read_u32(np, name, res); } else { pr_err("%s: illegal timing specification in %s\n", @@ -129,7 +130,7 @@ struct display_timings *of_get_display_timings(struct device_node *np) if (!entry) { pr_err("%s: no timing specifications given\n", np->full_name); - goto entryfail; + goto fail; } pr_debug("%s: using %s as default timing\n", @@ -141,7 +142,7 @@ struct display_timings *of_get_display_timings(struct device_node *np) if (disp->num_modes == 0) { /* should never happen, as entry was already found above */ pr_err("%s: no timings specified\n", np->full_name); - goto entryfail; + goto fail; } disp->modes = xzalloc(sizeof(struct fb_videomode) * disp->num_modes); @@ -163,7 +164,7 @@ struct display_timings *of_get_display_timings(struct device_node *np) */ pr_err("%s: error in timing %d\n", np->full_name, disp->num_modes + 1); - goto timingfail; + goto fail; } mode->name = xstrdup(entry->name); @@ -180,10 +181,8 @@ struct display_timings *of_get_display_timings(struct device_node *np) return disp; -timingfail: +fail: display_timings_release(disp); -entryfail: - free(disp); return NULL; } diff --git a/drivers/w1/Kconfig b/drivers/w1/Kconfig index dbc1e3c948..4a16197c69 100644 --- a/drivers/w1/Kconfig +++ b/drivers/w1/Kconfig @@ -8,8 +8,8 @@ menuconfig W1 if W1 -source drivers/w1/masters/Kconfig -source drivers/w1/slaves/Kconfig +source "drivers/w1/masters/Kconfig" +source "drivers/w1/slaves/Kconfig" config W1_DUAL_SEARCH bool "dual search" diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index 2793ee93d9..04efb1a3c8 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -48,7 +48,7 @@ config WATCHDOG_MXS28 config WATCHDOG_IMX bool "i.MX watchdog" - depends on ARCH_IMX + depends on ARCH_IMX || ARCH_LAYERSCAPE help Add support for watchdog found on Freescale i.MX SoCs. diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile index 69189ba1f3..6c8d36c8b8 100644 --- a/drivers/watchdog/Makefile +++ b/drivers/watchdog/Makefile @@ -7,6 +7,7 @@ obj-$(CONFIG_WATCHDOG_MXS28) += im28wd.o obj-$(CONFIG_WATCHDOG_DW) += dw_wdt.o obj-$(CONFIG_WATCHDOG_JZ4740) += jz4740.o obj-$(CONFIG_WATCHDOG_IMX_RESET_SOURCE) += imxwd.o +obj-$(CONFIG_WATCHDOG_IMX) += imxwd.o obj-$(CONFIG_WATCHDOG_ORION) += orion_wdt.o obj-$(CONFIG_ARCH_BCM283X) += bcm2835_wdt.o obj-$(CONFIG_RAVE_SP_WATCHDOG) += rave-sp-wdt.o diff --git a/drivers/watchdog/imxwd.c b/drivers/watchdog/imxwd.c index 8dba662392..77a3bd76ce 100644 --- a/drivers/watchdog/imxwd.c +++ b/drivers/watchdog/imxwd.c @@ -38,6 +38,7 @@ struct imx_wd { const struct imx_wd_ops *ops; struct restart_handler restart; bool ext_reset; + bool bigendian; }; #define to_imx_wd(h) container_of(h, struct imx_wd, wd) @@ -66,6 +67,22 @@ struct imx_wd { /* valid for i.MX27, i.MX31, always '0' on i.MX25, i.MX35, i.MX51 */ #define WSTR_COLDSTART (1 << 4) +static void imxwd_write(struct imx_wd *priv, int reg, uint16_t val) +{ + if (priv->bigendian) + out_be16(priv->base + reg, val); + else + writew(val, priv->base + reg); +} + +static uint16_t imxwd_read(struct imx_wd *priv, int reg) +{ + if (priv->bigendian) + return in_be16(priv->base + reg); + else + return readw(priv->base + reg); +} + static int imx1_watchdog_set_timeout(struct imx_wd *priv, unsigned timeout) { u16 val; @@ -73,18 +90,18 @@ static int imx1_watchdog_set_timeout(struct imx_wd *priv, unsigned timeout) dev_dbg(priv->dev, "%s: %d\n", __func__, timeout); if (!timeout) { - writew(IMX1_WDOG_WCR_WHALT, priv->base + IMX1_WDOG_WCR); + imxwd_write(priv, IMX1_WDOG_WCR, IMX1_WDOG_WCR_WHALT); return 0; } val = (timeout * 2 - 1) << 8; - writew(val, priv->base + IMX1_WDOG_WCR); - writew(IMX1_WDOG_WCR_WDE | val, priv->base + IMX1_WDOG_WCR); + imxwd_write(priv, IMX1_WDOG_WCR, val); + imxwd_write(priv, IMX1_WDOG_WCR, IMX1_WDOG_WCR_WDE | val); /* Write Service Sequence */ - writew(0x5555, priv->base + IMX1_WDOG_WSR); - writew(0xaaaa, priv->base + IMX1_WDOG_WSR); + imxwd_write(priv, IMX1_WDOG_WSR, 0x5555); + imxwd_write(priv, IMX1_WDOG_WSR, 0xaaaa); return 0; } @@ -113,13 +130,13 @@ static int imx21_watchdog_set_timeout(struct imx_wd *priv, unsigned timeout) * set time and some write once bits first prior enabling the * watchdog according to the datasheet */ - writew(val, priv->base + IMX21_WDOG_WCR); + imxwd_write(priv, IMX21_WDOG_WCR, val); - writew(IMX21_WDOG_WCR_WDE | val, priv->base + IMX21_WDOG_WCR); + imxwd_write(priv, IMX21_WDOG_WCR, IMX21_WDOG_WCR_WDE | val); /* Write Service Sequence */ - writew(0x5555, priv->base + IMX21_WDOG_WSR); - writew(0xaaaa, priv->base + IMX21_WDOG_WSR); + imxwd_write(priv, IMX21_WDOG_WSR, 0x5555); + imxwd_write(priv, IMX21_WDOG_WSR, 0xaaaa); return 0; } @@ -134,11 +151,11 @@ static void imx21_soc_reset(struct imx_wd *priv) else val |= IMX21_WDOG_WCR_WDA; /* do not assert ext-reset */ - writew(val, priv->base + IMX21_WDOG_WCR); + imxwd_write(priv, IMX21_WDOG_WCR, val); /* Two additional writes due to errata ERR004346 */ - writew(val, priv->base + IMX21_WDOG_WCR); - writew(val, priv->base + IMX21_WDOG_WCR); + imxwd_write(priv, IMX21_WDOG_WCR, val); + imxwd_write(priv, IMX21_WDOG_WCR, val); } static int imx_watchdog_set_timeout(struct watchdog *wd, unsigned timeout) @@ -161,7 +178,7 @@ static void __noreturn imxwd_force_soc_reset(struct restart_handler *rst) static void imx_watchdog_detect_reset_source(struct imx_wd *priv) { - u16 val = readw(priv->base + IMX21_WDOG_WSTR); + u16 val = imxwd_read(priv, IMX21_WDOG_WSTR); int priority = RESET_SOURCE_DEFAULT_PRIORITY; if (reset_source_get() == RESET_WDG) @@ -192,7 +209,7 @@ static int imx21_wd_init(struct imx_wd *priv) /* * Disable watchdog powerdown counter */ - writew(0x0, priv->base + IMX21_WDOG_WMCR); + imxwd_write(priv, IMX21_WDOG_WMCR, 0x0); return 0; } @@ -220,6 +237,7 @@ static int imx_wd_probe(struct device_d *dev) priv->wd.timeout_max = priv->ops->timeout_max; priv->wd.hwdev = dev; priv->dev = dev; + priv->bigendian = of_device_is_big_endian(dev->device_node); priv->ext_reset = of_property_read_bool(dev->device_node, "fsl,ext-reset-output"); diff --git a/dts/Bindings/Makefile b/dts/Bindings/Makefile index 50daa0b3b0..63b139f9ae 100644 --- a/dts/Bindings/Makefile +++ b/dts/Bindings/Makefile @@ -15,7 +15,7 @@ DT_TMP_SCHEMA := processed-schema.yaml extra-y += $(DT_TMP_SCHEMA) quiet_cmd_mk_schema = SCHEMA $@ - cmd_mk_schema = $(DT_MK_SCHEMA) $(DT_MK_SCHEMA_FLAGS) -o $@ $(filter-out FORCE, $^) + cmd_mk_schema = $(DT_MK_SCHEMA) $(DT_MK_SCHEMA_FLAGS) -o $@ $(real-prereqs) DT_DOCS = $(shell \ cd $(srctree)/$(src) && \ diff --git a/dts/Bindings/arm/amlogic.txt b/dts/Bindings/arm/amlogic.txt index 8dbc259081..7f40cb5f49 100644 --- a/dts/Bindings/arm/amlogic.txt +++ b/dts/Bindings/arm/amlogic.txt @@ -109,6 +109,7 @@ Board compatible values (alphabetically, grouped by SoC): - "amlogic,s400" (Meson axg a113d) - "amlogic,u200" (Meson g12a s905d2) + - "amediatech,x96-max" (Meson g12a s905x2) Amlogic Meson Firmware registers Interface ------------------------------------------ diff --git a/dts/Bindings/arm/armadeus.txt b/dts/Bindings/arm/armadeus.txt deleted file mode 100644 index 9821283ff5..0000000000 --- a/dts/Bindings/arm/armadeus.txt +++ /dev/null @@ -1,6 +0,0 @@ -Armadeus i.MX Platforms Device Tree Bindings ------------------------------------------------ - -APF51: i.MX51 based module. -Required root node properties: - - compatible = "armadeus,imx51-apf51", "fsl,imx51"; diff --git a/dts/Bindings/arm/atmel-sysregs.txt b/dts/Bindings/arm/atmel-sysregs.txt index 14f319f694..e61d00e25b 100644 --- a/dts/Bindings/arm/atmel-sysregs.txt +++ b/dts/Bindings/arm/atmel-sysregs.txt @@ -21,7 +21,8 @@ Its subnodes can be: RSTC Reset Controller required properties: - compatible: Should be "atmel,<chip>-rstc". - <chip> can be "at91sam9260" or "at91sam9g45" or "sama5d3" + <chip> can be "at91sam9260", "at91sam9g45", "sama5d3" or "samx7" + it also can be "microchip,sam9x60-rstc" - reg: Should contain registers location and length - clocks: phandle to input clock. @@ -147,6 +148,7 @@ required properties: - compatible: Should be "atmel,<chip>-sfr", "syscon" or "atmel,<chip>-sfrbu", "syscon" <chip> can be "sama5d3", "sama5d4" or "sama5d2". + It also can be "microchip,sam9x60-sfr", "syscon". - reg: Should contain registers location and length sfr@f0038000 { diff --git a/dts/Bindings/arm/bcm/brcm,bcm2835.txt b/dts/Bindings/arm/bcm/brcm,bcm2835.txt index 0dcc3ea5ad..245328f365 100644 --- a/dts/Bindings/arm/bcm/brcm,bcm2835.txt +++ b/dts/Bindings/arm/bcm/brcm,bcm2835.txt @@ -30,6 +30,10 @@ Raspberry Pi 2 Model B Required root node properties: compatible = "raspberrypi,2-model-b", "brcm,bcm2836"; +Raspberry Pi 3 Model A+ +Required root node properties: +compatible = "raspberrypi,3-model-a-plus", "brcm,bcm2837"; + Raspberry Pi 3 Model B Required root node properties: compatible = "raspberrypi,3-model-b", "brcm,bcm2837"; diff --git a/dts/Bindings/arm/bhf.txt b/dts/Bindings/arm/bhf.txt deleted file mode 100644 index 886b503caf..0000000000 --- a/dts/Bindings/arm/bhf.txt +++ /dev/null @@ -1,6 +0,0 @@ -Beckhoff Automation Platforms Device Tree Bindings --------------------------------------------------- - -CX9020 Embedded PC -Required root node properties: - - compatible = "bhf,cx9020", "fsl,imx53"; diff --git a/dts/Bindings/arm/bitmain.yaml b/dts/Bindings/arm/bitmain.yaml new file mode 100644 index 0000000000..0efdb4ac02 --- /dev/null +++ b/dts/Bindings/arm/bitmain.yaml @@ -0,0 +1,18 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/bitmain.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Bitmain platform device tree bindings + +maintainers: + - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + +properties: + compatible: + items: + - enum: + - bitmain,sophon-edge + - const: bitmain,bm1880 +... diff --git a/dts/Bindings/arm/compulab-boards.txt b/dts/Bindings/arm/compulab-boards.txt deleted file mode 100644 index 42a10285af..0000000000 --- a/dts/Bindings/arm/compulab-boards.txt +++ /dev/null @@ -1,25 +0,0 @@ -CompuLab SB-SOM is a multi-module baseboard capable of carrying: - - CM-T43 - - CM-T54 - - CM-QS600 - - CL-SOM-AM57x - - CL-SOM-iMX7 -modules with minor modifications to the SB-SOM assembly. - -Required root node properties: - - compatible = should be "compulab,sb-som" - -Compulab CL-SOM-iMX7 is a miniature System-on-Module (SoM) based on -Freescale i.MX7 ARM Cortex-A7 System-on-Chip. - -Required root node properties: - - compatible = "compulab,cl-som-imx7", "fsl,imx7d"; - -Compulab SBC-iMX7 is a single board computer based on the -Freescale i.MX7 system-on-chip. SBC-iMX7 is implemented with -the CL-SOM-iMX7 System-on-Module providing most of the functions, -and SB-SOM-iMX7 carrier board providing additional peripheral -functions and connectors. - -Required root node properties: - - compatible = "compulab,sbc-imx7", "compulab,cl-som-imx7", "fsl,imx7d"; diff --git a/dts/Bindings/arm/cpus.yaml b/dts/Bindings/arm/cpus.yaml index 298c17b327..365dcf384d 100644 --- a/dts/Bindings/arm/cpus.yaml +++ b/dts/Bindings/arm/cpus.yaml @@ -228,6 +228,7 @@ patternProperties: - renesas,r9a06g032-smp - rockchip,rk3036-smp - rockchip,rk3066-smp + - socionext,milbeaut-m10v-smp - ste,dbx500-smp cpu-release-addr: diff --git a/dts/Bindings/arm/freescale/fsl,imx7ulp-sim.txt b/dts/Bindings/arm/freescale/fsl,imx7ulp-sim.txt new file mode 100644 index 0000000000..7d0c7f0024 --- /dev/null +++ b/dts/Bindings/arm/freescale/fsl,imx7ulp-sim.txt @@ -0,0 +1,16 @@ +Freescale i.MX7ULP System Integration Module +---------------------------------------------- +The system integration module (SIM) provides system control and chip configuration +registers. In this module, chip revision information is located in JTAG ID register, +and a set of registers have been made available in DGO domain for SW use, with the +objective to maintain its value between system resets. + +Required properties: +- compatible: Should be "fsl,imx7ulp-sim". +- reg: Specifies base physical address and size of the register sets. + +Example: +sim: sim@410a3000 { + compatible = "fsl,imx7ulp-sim", "syscon"; + reg = <0x410a3000 0x1000>; +}; diff --git a/dts/Bindings/arm/freescale/fsl,scu.txt b/dts/Bindings/arm/freescale/fsl,scu.txt index 27784b6edf..72d481c8dd 100644 --- a/dts/Bindings/arm/freescale/fsl,scu.txt +++ b/dts/Bindings/arm/freescale/fsl,scu.txt @@ -58,7 +58,11 @@ This binding for the SCU power domain providers uses the generic power domain binding[2]. Required properties: -- compatible: Should be "fsl,imx8qxp-scu-pd". +- compatible: Should be one of: + "fsl,imx8qm-scu-pd", + "fsl,imx8qxp-scu-pd" + followed by "fsl,scu-pd" + - #power-domain-cells: Must be 1. Contains the Resource ID used by SCU commands. See detailed Resource ID list from: @@ -70,7 +74,10 @@ Clock bindings based on SCU Message Protocol This binding uses the common clock binding[1]. Required properties: -- compatible: Should be "fsl,imx8qxp-clock". +- compatible: Should be one of: + "fsl,imx8qm-clock" + "fsl,imx8qxp-clock" + followed by "fsl,scu-clk" - #clock-cells: Should be 1. Contains the Clock ID value. - clocks: List of clock specifiers, must contain an entry for each required entry in clock-names @@ -137,7 +144,7 @@ firmware { &lsio_mu1 1 3>; clk: clk { - compatible = "fsl,imx8qxp-clk"; + compatible = "fsl,imx8qxp-clk", "fsl,scu-clk"; #clock-cells = <1>; }; @@ -154,7 +161,7 @@ firmware { }; pd: imx8qx-pd { - compatible = "fsl,imx8qxp-scu-pd"; + compatible = "fsl,imx8qxp-scu-pd", "fsl,scu-pd"; #power-domain-cells = <1>; }; diff --git a/dts/Bindings/arm/fsl.txt b/dts/Bindings/arm/fsl.txt deleted file mode 100644 index 7fbc424840..0000000000 --- a/dts/Bindings/arm/fsl.txt +++ /dev/null @@ -1,237 +0,0 @@ -Freescale i.MX Platforms Device Tree Bindings ------------------------------------------------ - -i.MX23 Evaluation Kit -Required root node properties: - - compatible = "fsl,imx23-evk", "fsl,imx23"; - -i.MX25 Product Development Kit -Required root node properties: - - compatible = "fsl,imx25-pdk", "fsl,imx25"; - -i.MX27 Product Development Kit -Required root node properties: - - compatible = "fsl,imx27-pdk", "fsl,imx27"; - -i.MX28 Evaluation Kit -Required root node properties: - - compatible = "fsl,imx28-evk", "fsl,imx28"; - -i.MX51 Babbage Board -Required root node properties: - - compatible = "fsl,imx51-babbage", "fsl,imx51"; - -i.MX53 Automotive Reference Design Board -Required root node properties: - - compatible = "fsl,imx53-ard", "fsl,imx53"; - -i.MX53 Evaluation Kit -Required root node properties: - - compatible = "fsl,imx53-evk", "fsl,imx53"; - -i.MX53 Quick Start Board -Required root node properties: - - compatible = "fsl,imx53-qsb", "fsl,imx53"; - -i.MX53 Smart Mobile Reference Design Board -Required root node properties: - - compatible = "fsl,imx53-smd", "fsl,imx53"; - -i.MX6 Quad Armadillo2 Board -Required root node properties: - - compatible = "fsl,imx6q-arm2", "fsl,imx6q"; - -i.MX6 Quad SABRE Lite Board -Required root node properties: - - compatible = "fsl,imx6q-sabrelite", "fsl,imx6q"; - -i.MX6 Quad SABRE Smart Device Board -Required root node properties: - - compatible = "fsl,imx6q-sabresd", "fsl,imx6q"; - -i.MX6 Quad SABRE Automotive Board -Required root node properties: - - compatible = "fsl,imx6q-sabreauto", "fsl,imx6q"; - -i.MX6SLL EVK board -Required root node properties: - - compatible = "fsl,imx6sll-evk", "fsl,imx6sll"; - -i.MX6 Quad Plus SABRE Smart Device Board -Required root node properties: - - compatible = "fsl,imx6qp-sabresd", "fsl,imx6qp"; - -i.MX6 Quad Plus SABRE Automotive Board -Required root node properties: - - compatible = "fsl,imx6qp-sabreauto", "fsl,imx6qp"; - -i.MX6 DualLite SABRE Smart Device Board -Required root node properties: - - compatible = "fsl,imx6dl-sabresd", "fsl,imx6dl"; - -i.MX6 DualLite/Solo SABRE Automotive Board -Required root node properties: - - compatible = "fsl,imx6dl-sabreauto", "fsl,imx6dl"; - -i.MX6 SoloLite EVK Board -Required root node properties: - - compatible = "fsl,imx6sl-evk", "fsl,imx6sl"; - -i.MX6 UltraLite 14x14 EVK Board -Required root node properties: - - compatible = "fsl,imx6ul-14x14-evk", "fsl,imx6ul"; - -i.MX6 UltraLiteLite 14x14 EVK Board -Required root node properties: - - compatible = "fsl,imx6ull-14x14-evk", "fsl,imx6ull"; - -i.MX6 ULZ 14x14 EVK Board -Required root node properties: - - compatible = "fsl,imx6ulz-14x14-evk", "fsl,imx6ull", "fsl,imx6ulz"; - -i.MX6 SoloX SDB Board -Required root node properties: - - compatible = "fsl,imx6sx-sdb", "fsl,imx6sx"; - -i.MX6 SoloX Sabre Auto Board -Required root node properties: - - compatible = "fsl,imx6sx-sabreauto", "fsl,imx6sx"; - -i.MX7 SabreSD Board -Required root node properties: - - compatible = "fsl,imx7d-sdb", "fsl,imx7d"; - -i.MX7ULP Evaluation Kit -Required root node properties: - - compatible = "fsl,imx7ulp-evk", "fsl,imx7ulp"; - -Generic i.MX boards -------------------- - -No iomux setup is done for these boards, so this must have been configured -by the bootloader for boards to work with the generic bindings. - -i.MX27 generic board -Required root node properties: - - compatible = "fsl,imx27"; - -i.MX51 generic board -Required root node properties: - - compatible = "fsl,imx51"; - -i.MX53 generic board -Required root node properties: - - compatible = "fsl,imx53"; - -i.MX6q generic board -Required root node properties: - - compatible = "fsl,imx6q"; - -i.MX7ULP generic board -Required root node properties: - - compatible = "fsl,imx7ulp"; - -Freescale Vybrid Platform Device Tree Bindings ----------------------------------------------- - -For the Vybrid SoC familiy all variants with DDR controller are supported, -which is the VF5xx and VF6xx series. Out of historical reasons, in most -places the kernel uses vf610 to refer to the whole familiy. -The compatible string "fsl,vf610m4" is used for the secondary Cortex-M4 -core support. - -Required root node compatible property (one of them): - - compatible = "fsl,vf500"; - - compatible = "fsl,vf510"; - - compatible = "fsl,vf600"; - - compatible = "fsl,vf610"; - - compatible = "fsl,vf610m4"; - -Freescale LS1021A Platform Device Tree Bindings ------------------------------------------------- - -Required root node compatible properties: - - compatible = "fsl,ls1021a"; - -Freescale ARMv8 based Layerscape SoC family Device Tree Bindings ----------------------------------------------------------------- - -LS1012A SoC -Required root node properties: - - compatible = "fsl,ls1012a"; - -LS1012A ARMv8 based RDB Board -Required root node properties: - - compatible = "fsl,ls1012a-rdb", "fsl,ls1012a"; - -LS1012A ARMv8 based FRDM Board -Required root node properties: - - compatible = "fsl,ls1012a-frdm", "fsl,ls1012a"; - -LS1012A ARMv8 based QDS Board -Required root node properties: - - compatible = "fsl,ls1012a-qds", "fsl,ls1012a"; - -LS1043A SoC -Required root node properties: - - compatible = "fsl,ls1043a"; - -LS1043A ARMv8 based RDB Board -Required root node properties: - - compatible = "fsl,ls1043a-rdb", "fsl,ls1043a"; - -LS1043A ARMv8 based QDS Board -Required root node properties: - - compatible = "fsl,ls1043a-qds", "fsl,ls1043a"; - -LS1046A SoC -Required root node properties: - - compatible = "fsl,ls1046a"; - -LS1046A ARMv8 based QDS Board -Required root node properties: - - compatible = "fsl,ls1046a-qds", "fsl,ls1046a"; - -LS1046A ARMv8 based RDB Board -Required root node properties: - - compatible = "fsl,ls1046a-rdb", "fsl,ls1046a"; - -LS1088A SoC -Required root node properties: - - compatible = "fsl,ls1088a"; - -LS1088A ARMv8 based QDS Board -Required root node properties: - - compatible = "fsl,ls1088a-qds", "fsl,ls1088a"; - -LS1088A ARMv8 based RDB Board -Required root node properties: - - compatible = "fsl,ls1088a-rdb", "fsl,ls1088a"; - -LS2080A SoC -Required root node properties: - - compatible = "fsl,ls2080a"; - -LS2080A ARMv8 based Simulator model -Required root node properties: - - compatible = "fsl,ls2080a-simu", "fsl,ls2080a"; - -LS2080A ARMv8 based QDS Board -Required root node properties: - - compatible = "fsl,ls2080a-qds", "fsl,ls2080a"; - -LS2080A ARMv8 based RDB Board -Required root node properties: - - compatible = "fsl,ls2080a-rdb", "fsl,ls2080a"; - -LS2088A SoC -Required root node properties: - - compatible = "fsl,ls2088a"; - -LS2088A ARMv8 based QDS Board -Required root node properties: - - compatible = "fsl,ls2088a-qds", "fsl,ls2088a"; - -LS2088A ARMv8 based RDB Board -Required root node properties: - - compatible = "fsl,ls2088a-rdb", "fsl,ls2088a"; diff --git a/dts/Bindings/arm/fsl.yaml b/dts/Bindings/arm/fsl.yaml new file mode 100644 index 0000000000..7e2cd6ad26 --- /dev/null +++ b/dts/Bindings/arm/fsl.yaml @@ -0,0 +1,232 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/bindings/arm/fsl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX Platforms Device Tree Bindings + +maintainers: + - Shawn Guo <shawnguo@kernel.org> + - Li Yang <leoyang.li@nxp.com> + +properties: + $nodename: + const: '/' + compatible: + oneOf: + - description: i.MX23 based Boards + items: + - enum: + - fsl,imx23-evk + - olimex,imx23-olinuxino + - const: fsl,imx23 + + - description: i.MX25 Product Development Kit + items: + - enum: + - fsl,imx25-pdk + - const: fsl,imx25 + + - description: i.MX27 Product Development Kit + items: + - enum: + - fsl,imx27-pdk + - const: fsl,imx27 + + - description: i.MX28 based Boards + items: + - enum: + - fsl,imx28-evk + - i2se,duckbill + - i2se,duckbill-2 + - technologic,imx28-ts4600 + - const: fsl,imx28 + - description: i.MX28 Duckbill 2 based Boards + items: + - enum: + - i2se,duckbill-2-485 + - i2se,duckbill-2-enocean + - i2se,duckbill-2-spi + - const: i2se,duckbill-2 + - const: fsl,imx28 + + - description: i.MX51 Babbage Board + items: + - enum: + - armadeus,imx51-apf51 + - fsl,imx51-babbage + - technologic,imx51-ts4800 + - const: fsl,imx51 + + - description: i.MX53 based Boards + items: + - enum: + - bhf,cx9020 + - fsl,imx53-ard + - fsl,imx53-evk + - fsl,imx53-qsb + - fsl,imx53-smd + - const: fsl,imx53 + + - description: i.MX6Q based Boards + items: + - enum: + - fsl,imx6q-arm2 + - fsl,imx6q-sabreauto + - fsl,imx6q-sabrelite + - fsl,imx6q-sabresd + - technologic,imx6q-ts4900 + - technologic,imx6q-ts7970 + - const: fsl,imx6q + + - description: i.MX6QP based Boards + items: + - enum: + - fsl,imx6qp-sabreauto # i.MX6 Quad Plus SABRE Automotive Board + - fsl,imx6qp-sabresd # i.MX6 Quad Plus SABRE Smart Device Board + - const: fsl,imx6qp + + - description: i.MX6DL based Boards + items: + - enum: + - fsl,imx6dl-sabreauto # i.MX6 DualLite/Solo SABRE Automotive Board + - fsl,imx6dl-sabresd # i.MX6 DualLite SABRE Smart Device Board + - technologic,imx6dl-ts4900 + - technologic,imx6dl-ts7970 + - ysoft,imx6dl-yapp4-draco # i.MX6 DualLite Y Soft IOTA Draco board + - ysoft,imx6dl-yapp4-hydra # i.MX6 DualLite Y Soft IOTA Hydra board + - ysoft,imx6dl-yapp4-ursa # i.MX6 Solo Y Soft IOTA Ursa board + - const: fsl,imx6dl + + - description: i.MX6SL based Boards + items: + - enum: + - fsl,imx6sl-evk # i.MX6 SoloLite EVK Board + - const: fsl,imx6sl + + - description: i.MX6SLL based Boards + items: + - enum: + - fsl,imx6sll-evk + - const: fsl,imx6sll + + - description: i.MX6SX based Boards + items: + - enum: + - fsl,imx6sx-sabreauto # i.MX6 SoloX Sabre Auto Board + - fsl,imx6sx-sdb # i.MX6 SoloX SDB Board + - const: fsl,imx6sx + + - description: i.MX6UL based Boards + items: + - enum: + - fsl,imx6ul-14x14-evk # i.MX6 UltraLite 14x14 EVK Board + - const: fsl,imx6ul + + - description: i.MX6ULL based Boards + items: + - enum: + - fsl,imx6ull-14x14-evk # i.MX6 UltraLiteLite 14x14 EVK Board + - const: fsl,imx6ull + + - description: i.MX6ULZ based Boards + items: + - enum: + - fsl,imx6ulz-14x14-evk # i.MX6 ULZ 14x14 EVK Board + - const: fsl,imx6ull # This seems odd. Should be last? + - const: fsl,imx6ulz + + - description: i.MX7D based Boards + items: + - enum: + - fsl,imx7d-sdb # i.MX7 SabreSD Board + - const: fsl,imx7d + + - description: + Compulab SBC-iMX7 is a single board computer based on the + Freescale i.MX7 system-on-chip. SBC-iMX7 is implemented with + the CL-SOM-iMX7 System-on-Module providing most of the functions, + and SB-SOM-iMX7 carrier board providing additional peripheral + functions and connectors. + items: + - const: compulab,sbc-imx7 + - const: compulab,cl-som-imx7 + - const: fsl,imx7d + + - description: i.MX8QXP based Boards + items: + - enum: + - fsl,imx8qxp-mek # i.MX8QXP MEK Board + - const: fsl,imx8qxp + + - description: + Freescale Vybrid Platform Device Tree Bindings + + For the Vybrid SoC familiy all variants with DDR controller are supported, + which is the VF5xx and VF6xx series. Out of historical reasons, in most + places the kernel uses vf610 to refer to the whole familiy. + The compatible string "fsl,vf610m4" is used for the secondary Cortex-M4 + core support. + items: + - enum: + - fsl,vf500 + - fsl,vf510 + - fsl,vf600 + - fsl,vf610 + - fsl,vf610m4 + + - description: LS1012A based Boards + items: + - enum: + - ebs-systart,oxalis + - fsl,ls1012a-rdb + - fsl,ls1012a-frdm + - fsl,ls1012a-qds + - const: fsl,ls1012a + + - description: LS1021A based Boards + items: + - enum: + - fsl,ls1021a-moxa-uc-8410a + - fsl,ls1021a-qds + - fsl,ls1021a-twr + - const: fsl,ls1021a + + - description: LS1043A based Boards + items: + - enum: + - fsl,ls1043a-rdb + - fsl,ls1043a-qds + - const: fsl,ls1043a + + - description: LS1046A based Boards + items: + - enum: + - fsl,ls1046a-qds + - fsl,ls1046a-rdb + - const: fsl,ls1046a + + - description: LS1088A based Boards + items: + - enum: + - fsl,ls1088a-qds + - fsl,ls1088a-rdb + - const: fsl,ls1088a + + - description: LS2080A based Boards + items: + - enum: + - fsl,ls2080a-simu + - fsl,ls2080a-qds + - fsl,ls2080a-rdb + - const: fsl,ls2080a + + - description: LS2088A based Boards + items: + - enum: + - fsl,ls2088a-qds + - fsl,ls2088a-rdb + - const: fsl,ls2088a + +... diff --git a/dts/Bindings/arm/i2se.txt b/dts/Bindings/arm/i2se.txt deleted file mode 100644 index dbd54a3aa0..0000000000 --- a/dts/Bindings/arm/i2se.txt +++ /dev/null @@ -1,22 +0,0 @@ -I2SE Device Tree Bindings -------------------------- - -Duckbill Board -Required root node properties: - - compatible = "i2se,duckbill", "fsl,imx28"; - -Duckbill 2 Board -Required root node properties: - - compatible = "i2se,duckbill-2", "fsl,imx28"; - -Duckbill 2 485 Board -Required root node properties: - - compatible = "i2se,duckbill-2-485", "i2se,duckbill-2", "fsl,imx28"; - -Duckbill 2 EnOcean Board -Required root node properties: - - compatible = "i2se,duckbill-2-enocean", "i2se,duckbill-2", "fsl,imx28"; - -Duckbill 2 SPI Board -Required root node properties: - - compatible = "i2se,duckbill-2-spi", "i2se,duckbill-2", "fsl,imx28"; diff --git a/dts/Bindings/arm/l2c2x0.txt b/dts/Bindings/arm/l2c2x0.txt deleted file mode 100644 index fbe6cb21f4..0000000000 --- a/dts/Bindings/arm/l2c2x0.txt +++ /dev/null @@ -1,114 +0,0 @@ -* ARM L2 Cache Controller - -ARM cores often have a separate L2C210/L2C220/L2C310 (also known as PL210/PL220/ -PL310 and variants) based level 2 cache controller. All these various implementations -of the L2 cache controller have compatible programming models (Note 1). -Some of the properties that are just prefixed "cache-*" are taken from section -3.7.3 of the Devicetree Specification which can be found at: -https://www.devicetree.org/specifications/ - -The ARM L2 cache representation in the device tree should be done as follows: - -Required properties: - -- compatible : should be one of: - "arm,pl310-cache" - "arm,l220-cache" - "arm,l210-cache" - "bcm,bcm11351-a2-pl310-cache": DEPRECATED by "brcm,bcm11351-a2-pl310-cache" - "brcm,bcm11351-a2-pl310-cache": For Broadcom bcm11351 chipset where an - offset needs to be added to the address before passing down to the L2 - cache controller - "marvell,aurora-system-cache": Marvell Controller designed to be - compatible with the ARM one, with system cache mode (meaning - maintenance operations on L1 are broadcasted to the L2 and L2 - performs the same operation). - "marvell,aurora-outer-cache": Marvell Controller designed to be - compatible with the ARM one with outer cache mode. - "marvell,tauros3-cache": Marvell Tauros3 cache controller, compatible - with arm,pl310-cache controller. -- cache-unified : Specifies the cache is a unified cache. -- cache-level : Should be set to 2 for a level 2 cache. -- reg : Physical base address and size of cache controller's memory mapped - registers. - -Optional properties: - -- arm,data-latency : Cycles of latency for Data RAM accesses. Specifies 3 cells of - read, write and setup latencies. Minimum valid values are 1. Controllers - without setup latency control should use a value of 0. -- arm,tag-latency : Cycles of latency for Tag RAM accesses. Specifies 3 cells of - read, write and setup latencies. Controllers without setup latency control - should use 0. Controllers without separate read and write Tag RAM latency - values should only use the first cell. -- arm,dirty-latency : Cycles of latency for Dirty RAMs. This is a single cell. -- arm,filter-ranges : <start length> Starting address and length of window to - filter. Addresses in the filter window are directed to the M1 port. Other - addresses will go to the M0 port. -- arm,io-coherent : indicates that the system is operating in an hardware - I/O coherent mode. Valid only when the arm,pl310-cache compatible - string is used. -- interrupts : 1 combined interrupt. -- cache-size : specifies the size in bytes of the cache -- cache-sets : specifies the number of associativity sets of the cache -- cache-block-size : specifies the size in bytes of a cache block -- cache-line-size : specifies the size in bytes of a line in the cache, - if this is not specified, the line size is assumed to be equal to the - cache block size -- cache-id-part: cache id part number to be used if it is not present - on hardware -- wt-override: If present then L2 is forced to Write through mode -- arm,double-linefill : Override double linefill enable setting. Enable if - non-zero, disable if zero. -- arm,double-linefill-incr : Override double linefill on INCR read. Enable - if non-zero, disable if zero. -- arm,double-linefill-wrap : Override double linefill on WRAP read. Enable - if non-zero, disable if zero. -- arm,prefetch-drop : Override prefetch drop enable setting. Enable if non-zero, - disable if zero. -- arm,prefetch-offset : Override prefetch offset value. Valid values are - 0-7, 15, 23, and 31. -- arm,shared-override : The default behavior of the L220 or PL310 cache - controllers with respect to the shareable attribute is to transform "normal - memory non-cacheable transactions" into "cacheable no allocate" (for reads) - or "write through no write allocate" (for writes). - On systems where this may cause DMA buffer corruption, this property must be - specified to indicate that such transforms are precluded. -- arm,parity-enable : enable parity checking on the L2 cache (L220 or PL310). -- arm,parity-disable : disable parity checking on the L2 cache (L220 or PL310). -- arm,outer-sync-disable : disable the outer sync operation on the L2 cache. - Some core tiles, especially ARM PB11MPCore have a faulty L220 cache that - will randomly hang unless outer sync operations are disabled. -- prefetch-data : Data prefetch. Value: <0> (forcibly disable), <1> - (forcibly enable), property absent (retain settings set by firmware) -- prefetch-instr : Instruction prefetch. Value: <0> (forcibly disable), - <1> (forcibly enable), property absent (retain settings set by - firmware) -- arm,dynamic-clock-gating : L2 dynamic clock gating. Value: <0> (forcibly - disable), <1> (forcibly enable), property absent (OS specific behavior, - preferably retain firmware settings) -- arm,standby-mode: L2 standby mode enable. Value <0> (forcibly disable), - <1> (forcibly enable), property absent (OS specific behavior, - preferably retain firmware settings) -- arm,early-bresp-disable : Disable the CA9 optimization Early BRESP (PL310) -- arm,full-line-zero-disable : Disable the CA9 optimization Full line of zero - write (PL310) - -Example: - -L2: cache-controller { - compatible = "arm,pl310-cache"; - reg = <0xfff12000 0x1000>; - arm,data-latency = <1 1 1>; - arm,tag-latency = <2 2 2>; - arm,filter-ranges = <0x80000000 0x8000000>; - cache-unified; - cache-level = <2>; - interrupts = <45>; -}; - -Note 1: The description in this document doesn't apply to integrated L2 - cache controllers as found in e.g. Cortex-A15/A7/A57/A53. These - integrated L2 controllers are assumed to be all preconfigured by - early secure boot code. Thus no need to deal with their configuration - in the kernel at all. diff --git a/dts/Bindings/arm/l2c2x0.yaml b/dts/Bindings/arm/l2c2x0.yaml new file mode 100644 index 0000000000..bfc5c18556 --- /dev/null +++ b/dts/Bindings/arm/l2c2x0.yaml @@ -0,0 +1,248 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/l2c2x0.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM L2 Cache Controller + +maintainers: + - Rob Herring <robh@kernel.org> + +description: |+ + ARM cores often have a separate L2C210/L2C220/L2C310 (also known as PL210/ + PL220/PL310 and variants) based level 2 cache controller. All these various + implementations of the L2 cache controller have compatible programming + models (Note 1). Some of the properties that are just prefixed "cache-*" are + taken from section 3.7.3 of the Devicetree Specification which can be found + at: + https://www.devicetree.org/specifications/ + + Note 1: The description in this document doesn't apply to integrated L2 + cache controllers as found in e.g. Cortex-A15/A7/A57/A53. These + integrated L2 controllers are assumed to be all preconfigured by + early secure boot code. Thus no need to deal with their configuration + in the kernel at all. + +allOf: + - $ref: /schemas/cache-controller.yaml# + +properties: + compatible: + enum: + - arm,pl310-cache + - arm,l220-cache + - arm,l210-cache + # DEPRECATED by "brcm,bcm11351-a2-pl310-cache" + - bcm,bcm11351-a2-pl310-cache + # For Broadcom bcm11351 chipset where an + # offset needs to be added to the address before passing down to the L2 + # cache controller + - brcm,bcm11351-a2-pl310-cache + # Marvell Controller designed to be + # compatible with the ARM one, with system cache mode (meaning + # maintenance operations on L1 are broadcasted to the L2 and L2 + # performs the same operation). + - marvell,aurora-system-cache + # Marvell Controller designed to be + # compatible with the ARM one with outer cache mode. + - marvell,aurora-outer-cache + # Marvell Tauros3 cache controller, compatible + # with arm,pl310-cache controller. + - marvell,tauros3-cache + + cache-level: + const: 2 + + cache-unified: true + cache-size: true + cache-sets: true + cache-block-size: true + cache-line-size: true + + reg: + maxItems: 1 + + arm,data-latency: + description: Cycles of latency for Data RAM accesses. Specifies 3 cells of + read, write and setup latencies. Minimum valid values are 1. Controllers + without setup latency control should use a value of 0. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + - minItems: 2 + maxItems: 3 + items: + minimum: 0 + maximum: 8 + + arm,tag-latency: + description: Cycles of latency for Tag RAM accesses. Specifies 3 cells of + read, write and setup latencies. Controllers without setup latency control + should use 0. Controllers without separate read and write Tag RAM latency + values should only use the first cell. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + - minItems: 1 + maxItems: 3 + items: + minimum: 0 + maximum: 8 + + arm,dirty-latency: + description: Cycles of latency for Dirty RAMs. This is a single cell. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - minimum: 1 + maximum: 8 + + arm,filter-ranges: + description: <start length> Starting address and length of window to + filter. Addresses in the filter window are directed to the M1 port. Other + addresses will go to the M0 port. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + - items: + minItems: 2 + maxItems: 2 + + arm,io-coherent: + description: indicates that the system is operating in an hardware + I/O coherent mode. Valid only when the arm,pl310-cache compatible + string is used. + type: boolean + + interrupts: + # Either a single combined interrupt or up to 9 individual interrupts + minItems: 1 + maxItems: 9 + + cache-id-part: + description: cache id part number to be used if it is not present + on hardware + $ref: /schemas/types.yaml#/definitions/uint32 + + wt-override: + description: If present then L2 is forced to Write through mode + type: boolean + + arm,double-linefill: + description: Override double linefill enable setting. Enable if + non-zero, disable if zero. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - enum: [ 0, 1 ] + + arm,double-linefill-incr: + description: Override double linefill on INCR read. Enable + if non-zero, disable if zero. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - enum: [ 0, 1 ] + + arm,double-linefill-wrap: + description: Override double linefill on WRAP read. Enable + if non-zero, disable if zero. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - enum: [ 0, 1 ] + + arm,prefetch-drop: + description: Override prefetch drop enable setting. Enable if non-zero, + disable if zero. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - enum: [ 0, 1 ] + + arm,prefetch-offset: + description: Override prefetch offset value. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - enum: [ 0, 1, 2, 3, 4, 5, 6, 7, 15, 23, 31 ] + + arm,shared-override: + description: The default behavior of the L220 or PL310 cache + controllers with respect to the shareable attribute is to transform "normal + memory non-cacheable transactions" into "cacheable no allocate" (for reads) + or "write through no write allocate" (for writes). + On systems where this may cause DMA buffer corruption, this property must + be specified to indicate that such transforms are precluded. + type: boolean + + arm,parity-enable: + description: enable parity checking on the L2 cache (L220 or PL310). + type: boolean + + arm,parity-disable: + description: disable parity checking on the L2 cache (L220 or PL310). + type: boolean + + arm,outer-sync-disable: + description: disable the outer sync operation on the L2 cache. + Some core tiles, especially ARM PB11MPCore have a faulty L220 cache that + will randomly hang unless outer sync operations are disabled. + type: boolean + + prefetch-data: + description: | + Data prefetch. Value: <0> (forcibly disable), <1> + (forcibly enable), property absent (retain settings set by firmware) + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - enum: [ 0, 1 ] + + prefetch-instr: + description: | + Instruction prefetch. Value: <0> (forcibly disable), + <1> (forcibly enable), property absent (retain settings set by + firmware) + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - enum: [ 0, 1 ] + + arm,dynamic-clock-gating: + description: | + L2 dynamic clock gating. Value: <0> (forcibly + disable), <1> (forcibly enable), property absent (OS specific behavior, + preferably retain firmware settings) + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - enum: [ 0, 1 ] + + arm,standby-mode: + description: L2 standby mode enable. Value <0> (forcibly disable), + <1> (forcibly enable), property absent (OS specific behavior, + preferably retain firmware settings) + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - enum: [ 0, 1 ] + + arm,early-bresp-disable: + description: Disable the CA9 optimization Early BRESP (PL310) + type: boolean + + arm,full-line-zero-disable: + description: Disable the CA9 optimization Full line of zero + write (PL310) + type: boolean + +required: + - compatible + - cache-unified + - reg + +additionalProperties: false + +examples: + - | + cache-controller@fff12000 { + compatible = "arm,pl310-cache"; + reg = <0xfff12000 0x1000>; + arm,data-latency = <1 1 1>; + arm,tag-latency = <2 2 2>; + arm,filter-ranges = <0x80000000 0x8000000>; + cache-unified; + cache-level = <2>; + interrupts = <45>; + }; + +... diff --git a/dts/Bindings/arm/mediatek.txt b/dts/Bindings/arm/mediatek.txt index 8f260e5cfd..56ac7896d6 100644 --- a/dts/Bindings/arm/mediatek.txt +++ b/dts/Bindings/arm/mediatek.txt @@ -15,11 +15,12 @@ compatible: Must contain one of "mediatek,mt6795" "mediatek,mt6797" "mediatek,mt7622" - "mediatek,mt7623" which is referred to MT7623N SoC - "mediatek,mt7623a" + "mediatek,mt7623" + "mediatek,mt7629" "mediatek,mt8127" "mediatek,mt8135" "mediatek,mt8173" + "mediatek,mt8183" Supported boards: @@ -57,6 +58,9 @@ Supported boards: - Reference board variant 1 for MT7622: Required root node properties: - compatible = "mediatek,mt7622-rfb1", "mediatek,mt7622"; +- Bananapi BPI-R64 for MT7622: + Required root node properties: + - compatible = "bananapi,bpi-r64", "mediatek,mt7622"; - Reference board for MT7623a with eMMC: Required root node properties: - compatible = "mediatek,mt7623a-rfb-emmc", "mediatek,mt7623"; @@ -68,6 +72,9 @@ Supported boards: - compatible = "mediatek,mt7623n-rfb-emmc", "mediatek,mt7623"; - Bananapi BPI-R2 board: - compatible = "bananapi,bpi-r2", "mediatek,mt7623"; +- Reference board for MT7629: + Required root node properties: + - compatible = "mediatek,mt7629-rfb", "mediatek,mt7629"; - MTK mt8127 tablet moose EVB: Required root node properties: - compatible = "mediatek,mt8127-moose", "mediatek,mt8127"; @@ -77,3 +84,6 @@ Supported boards: - MTK mt8173 tablet EVB: Required root node properties: - compatible = "mediatek,mt8173-evb", "mediatek,mt8173"; +- Evaluation board for MT8183: + Required root node properties: + - compatible = "mediatek,mt8183-evb", "mediatek,mt8183"; diff --git a/dts/Bindings/arm/olimex.txt b/dts/Bindings/arm/olimex.txt deleted file mode 100644 index d726aeca56..0000000000 --- a/dts/Bindings/arm/olimex.txt +++ /dev/null @@ -1,10 +0,0 @@ -Olimex Device Tree Bindings ---------------------------- - -SAM9-L9260 Board -Required root node properties: - - compatible = "olimex,sam9-l9260", "atmel,at91sam9260"; - -i.MX23 Olinuxino Low Cost Board -Required root node properties: - - compatible = "olimex,imx23-olinuxino", "fsl,imx23"; diff --git a/dts/Bindings/arm/pmu.txt b/dts/Bindings/arm/pmu.txt deleted file mode 100644 index 13611a8199..0000000000 --- a/dts/Bindings/arm/pmu.txt +++ /dev/null @@ -1,70 +0,0 @@ -* ARM Performance Monitor Units - -ARM cores often have a PMU for counting cpu and cache events like cache misses -and hits. The interface to the PMU is part of the ARM ARM. The ARM PMU -representation in the device tree should be done as under:- - -Required properties: - -- compatible : should be one of - "apm,potenza-pmu" - "arm,armv8-pmuv3" - "arm,cortex-a73-pmu" - "arm,cortex-a72-pmu" - "arm,cortex-a57-pmu" - "arm,cortex-a53-pmu" - "arm,cortex-a35-pmu" - "arm,cortex-a17-pmu" - "arm,cortex-a15-pmu" - "arm,cortex-a12-pmu" - "arm,cortex-a9-pmu" - "arm,cortex-a8-pmu" - "arm,cortex-a7-pmu" - "arm,cortex-a5-pmu" - "arm,arm11mpcore-pmu" - "arm,arm1176-pmu" - "arm,arm1136-pmu" - "brcm,vulcan-pmu" - "cavium,thunder-pmu" - "qcom,scorpion-pmu" - "qcom,scorpion-mp-pmu" - "qcom,krait-pmu" -- interrupts : 1 combined interrupt or 1 per core. If the interrupt is a per-cpu - interrupt (PPI) then 1 interrupt should be specified. - -Optional properties: - -- interrupt-affinity : When using SPIs, specifies a list of phandles to CPU - nodes corresponding directly to the affinity of - the SPIs listed in the interrupts property. - - When using a PPI, specifies a list of phandles to CPU - nodes corresponding to the set of CPUs which have - a PMU of this type signalling the PPI listed in the - interrupts property, unless this is already specified - by the PPI interrupt specifier itself (in which case - the interrupt-affinity property shouldn't be present). - - This property should be present when there is more than - a single SPI. - - -- qcom,no-pc-write : Indicates that this PMU doesn't support the 0xc and 0xd - events. - -- secure-reg-access : Indicates that the ARMv7 Secure Debug Enable Register - (SDER) is accessible. This will cause the driver to do - any setup required that is only possible in ARMv7 secure - state. If not present the ARMv7 SDER will not be touched, - which means the PMU may fail to operate unless external - code (bootloader or security monitor) has performed the - appropriate initialisation. Note that this property is - not valid for non-ARMv7 CPUs or ARMv7 CPUs booting Linux - in Non-secure state. - -Example: - -pmu { - compatible = "arm,cortex-a9-pmu"; - interrupts = <100 101>; -}; diff --git a/dts/Bindings/arm/pmu.yaml b/dts/Bindings/arm/pmu.yaml new file mode 100644 index 0000000000..52ae094ce3 --- /dev/null +++ b/dts/Bindings/arm/pmu.yaml @@ -0,0 +1,87 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/pmu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM Performance Monitor Units + +maintainers: + - Mark Rutland <mark.rutland@arm.com> + - Will Deacon <will.deacon@arm.com> + +description: |+ + ARM cores often have a PMU for counting cpu and cache events like cache misses + and hits. The interface to the PMU is part of the ARM ARM. The ARM PMU + representation in the device tree should be done as under:- + +properties: + compatible: + items: + - enum: + - apm,potenza-pmu + - arm,armv8-pmuv3 + - arm,cortex-a73-pmu + - arm,cortex-a72-pmu + - arm,cortex-a57-pmu + - arm,cortex-a53-pmu + - arm,cortex-a35-pmu + - arm,cortex-a17-pmu + - arm,cortex-a15-pmu + - arm,cortex-a12-pmu + - arm,cortex-a9-pmu + - arm,cortex-a8-pmu + - arm,cortex-a7-pmu + - arm,cortex-a5-pmu + - arm,arm11mpcore-pmu + - arm,arm1176-pmu + - arm,arm1136-pmu + - brcm,vulcan-pmu + - cavium,thunder-pmu + - qcom,scorpion-pmu + - qcom,scorpion-mp-pmu + - qcom,krait-pmu + + interrupts: + # Don't know how many CPUs, so no constraints to specify + description: 1 per-cpu interrupt (PPI) or 1 interrupt per core. + + interrupt-affinity: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: + When using SPIs, specifies a list of phandles to CPU + nodes corresponding directly to the affinity of + the SPIs listed in the interrupts property. + + When using a PPI, specifies a list of phandles to CPU + nodes corresponding to the set of CPUs which have + a PMU of this type signalling the PPI listed in the + interrupts property, unless this is already specified + by the PPI interrupt specifier itself (in which case + the interrupt-affinity property shouldn't be present). + + This property should be present when there is more than + a single SPI. + + qcom,no-pc-write: + type: boolean + description: + Indicates that this PMU doesn't support the 0xc and 0xd events. + + secure-reg-access: + type: boolean + description: + Indicates that the ARMv7 Secure Debug Enable Register + (SDER) is accessible. This will cause the driver to do + any setup required that is only possible in ARMv7 secure + state. If not present the ARMv7 SDER will not be touched, + which means the PMU may fail to operate unless external + code (bootloader or security monitor) has performed the + appropriate initialisation. Note that this property is + not valid for non-ARMv7 CPUs or ARMv7 CPUs booting Linux + in Non-secure state. + +required: + - compatible + +... diff --git a/dts/Bindings/arm/renesas.yaml b/dts/Bindings/arm/renesas.yaml new file mode 100644 index 0000000000..19f379863d --- /dev/null +++ b/dts/Bindings/arm/renesas.yaml @@ -0,0 +1,238 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/shmobile.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas SH-Mobile, R-Mobile, and R-Car Platform Device Tree Bindings + +maintainers: + - Geert Uytterhoeven <geert+renesas@glider.be> + +properties: + $nodename: + const: '/' + compatible: + oneOf: + - description: Emma Mobile EV2 + items: + - enum: + - renesas,kzm9d # Kyoto Microcomputer Co. KZM-A9-Dual + - const: renesas,emev2 + + - description: RZ/A1H (R7S72100) + items: + - enum: + - renesas,genmai # Genmai (RTK772100BC00000BR) + - renesas,gr-peach # GR-Peach (X28A-M01-E/F) + - renesas,rskrza1 # RSKRZA1 (YR0K77210C000BE) + - const: renesas,r7s72100 + + - description: RZ/A2 (R7S9210) + items: + - enum: + - renesas,rza2mevb # RZ/A2M Eval Board (RTK7921053S00000BE) + - const: renesas,r7s9210 + + - description: SH-Mobile AG5 (R8A73A00/SH73A0) + items: + - enum: + - renesas,kzm9g # Kyoto Microcomputer Co. KZM-A9-GT + - const: renesas,sh73a0 + + - description: R-Mobile APE6 (R8A73A40) + items: + - enum: + - renesas,ape6evm + - const: renesas,r8a73a4 + + - description: R-Mobile A1 (R8A77400) + items: + - enum: + - renesas,armadillo800eva # Atmark Techno Armadillo-800 EVA + - const: renesas,r8a7740 + + - description: RZ/G1H (R8A77420) + items: + - const: renesas,r8a7742 + + - description: RZ/G1M (R8A77430) + items: + - enum: + # iWave Systems RZ/G1M Qseven Development Platform (iW-RainboW-G20D-Qseven) + - iwave,g20d + - const: iwave,g20m + - const: renesas,r8a7743 + + - items: + - enum: + # iWave Systems RZ/G1M Qseven System On Module (iW-RainboW-G20M-Qseven) + - iwave,g20m + - renesas,sk-rzg1m # SK-RZG1M (YR8A77430S000BE) + - const: renesas,r8a7743 + + - description: RZ/G1N (R8A77440) + items: + - enum: + # iWave Systems RZ/G1N Qseven Development Platform (iW-RainboW-G20D-Qseven) + - iwave,g20d + - const: iwave,g20m + - const: renesas,r8a7744 + + - items: + - enum: + # iWave Systems RZ/G1N Qseven System On Module (iW-RainboW-G20M-Qseven) + - iwave,g20m + - const: renesas,r8a7744 + + - description: RZ/G1E (R8A77450) + items: + - enum: + - iwave,g22m # iWave Systems RZ/G1E SODIMM System On Module (iW-RainboW-G22M-SM) + - renesas,sk-rzg1e # SK-RZG1E (YR8A77450S000BE) + - const: renesas,r8a7745 + + - description: iWave Systems RZ/G1E SODIMM SOM Development Platform (iW-RainboW-G22D) + items: + - const: iwave,g22d + - const: iwave,g22m + - const: renesas,r8a7745 + + - description: RZ/G1C (R8A77470) + items: + - enum: + - iwave,g23s #iWave Systems RZ/G1C Single Board Computer (iW-RainboW-G23S) + - const: renesas,r8a77470 + + - description: RZ/G2M (R8A774A1) + items: + - const: renesas,r8a774a1 + + - description: RZ/G2E (R8A774C0) + items: + - enum: + - si-linux,cat874 # Silicon Linux RZ/G2E 96board platform (CAT874) + - const: renesas,r8a774c0 + + - items: + - enum: + - si-linux,cat875 # Silicon Linux sub board for CAT874 (CAT875) + - const: si-linux,cat874 + - const: renesas,r8a774c0 + + - description: R-Car M1A (R8A77781) + items: + - enum: + - renesas,bockw + - const: renesas,r8a7778 + + - description: R-Car H1 (R8A77790) + items: + - enum: + - renesas,marzen # Marzen (R0P7779A00010S) + - const: renesas,r8a7779 + + - description: R-Car H2 (R8A77900) + items: + - enum: + - renesas,lager # Lager (RTP0RC7790SEB00010S) + - renesas,stout # Stout (ADAS Starterkit, Y-R-CAR-ADAS-SKH2-BOARD) + - const: renesas,r8a7790 + + - description: R-Car M2-W (R8A77910) + items: + - enum: + - renesas,henninger + - renesas,koelsch # Koelsch (RTP0RC7791SEB00010S) + - renesas,porter # Porter (M2-LCDP) + - const: renesas,r8a7791 + + - description: R-Car V2H (R8A77920) + items: + - enum: + - renesas,blanche # Blanche (RTP0RC7792SEB00010S) + - renesas,wheat # Wheat (RTP0RC7792ASKB0000JE) + - const: renesas,r8a7792 + + - description: R-Car M2-N (R8A77930) + items: + - enum: + - renesas,gose # Gose (RTP0RC7793SEB00010S) + - const: renesas,r8a7793 + + - description: R-Car E2 (R8A77940) + items: + - enum: + - renesas,alt # Alt (RTP0RC7794SEB00010S) + - renesas,silk # SILK (RTP0RC7794LCB00011S) + - const: renesas,r8a7794 + + - description: R-Car H3 (R8A77950) + items: + - enum: + # H3ULCB (R-Car Starter Kit Premier, RTP0RC7795SKBX0010SA00 (H3 ES1.1)) + # H3ULCB (R-Car Starter Kit Premier, RTP0RC77951SKBX010SA00 (H3 ES2.0)) + - renesas,h3ulcb + - renesas,salvator-x # Salvator-X (RTP0RC7795SIPB0010S) + - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version, RTP0RC7795SIPB0012S) + - const: renesas,r8a7795 + + - description: R-Car M3-W (R8A77960) + items: + - enum: + - renesas,m3ulcb # M3ULCB (R-Car Starter Kit Pro, RTP0RC7796SKBX0010SA09 (M3 ES1.0)) + - renesas,salvator-x # Salvator-X (RTP0RC7796SIPB0011S) + - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version, RTP0RC7796SIPB0012S) + - const: renesas,r8a7796 + + - description: Kingfisher (SBEV-RCAR-KF-M03) + items: + - const: shimafuji,kingfisher + - enum: + - renesas,h3ulcb + - renesas,m3ulcb + - enum: + - renesas,r8a7795 + - renesas,r8a7796 + + - description: R-Car M3-N (R8A77965) + items: + - enum: + - renesas,m3nulcb # M3NULCB (R-Car Starter Kit Pro, RTP0RC77965SKBX010SA00 (M3-N ES1.1)) + - renesas,salvator-x # Salvator-X (RTP0RC7796SIPB0011S (M3-N)) + - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version, RTP0RC77965SIPB012S) + - const: renesas,r8a77965 + + - description: R-Car V3M (R8A77970) + items: + - enum: + - renesas,eagle # Eagle (RTP0RC77970SEB0010S) + - renesas,v3msk # V3MSK (Y-ASK-RCAR-V3M-WS10) + - const: renesas,r8a77970 + + - description: R-Car V3H (R8A77980) + items: + - enum: + - renesas,condor # Condor (RTP0RC77980SEB0010SS/RTP0RC77980SEB0010SA01) + - renesas,v3hsk # V3HSK (Y-ASK-RCAR-V3H-WS10) + - const: renesas,r8a77980 + + - description: R-Car E3 (R8A77990) + items: + - enum: + - renesas,ebisu # Ebisu (RTP0RC77990SEB0010S) + - const: renesas,r8a77990 + + - description: R-Car D3 (R8A77995) + items: + - enum: + - renesas,draak # Draak (RTP0RC77995SEB0010S) + - const: renesas,r8a77995 + + - description: RZ/N1D (R9A06G032) + items: + - enum: + - renesas,rzn1d400-db # RZN1D-DB (RZ/N1D Demo Board for the RZ/N1D 400 pins package) + - const: renesas,r9a06g032 + +... diff --git a/dts/Bindings/arm/rockchip.yaml b/dts/Bindings/arm/rockchip.yaml index b12958bda0..061a03edf9 100644 --- a/dts/Bindings/arm/rockchip.yaml +++ b/dts/Bindings/arm/rockchip.yaml @@ -60,6 +60,11 @@ properties: - const: chipspark,rayeager-px2 - const: rockchip,rk3066a + - description: Elgin RV1108 R1 + items: + - const: elgin,rv1108-r1 + - const: rockchip,rv1108 + - description: Firefly Firefly-RK3288 items: - enum: @@ -87,6 +92,13 @@ properties: - const: firefly,roc-rk3399-pc - const: rockchip,rk3399 + - description: FriendlyElec NanoPi4 series boards + items: + - enum: + - friendlyarm,nanopc-t4 + - friendlyarm,nanopi-m4 + - const: rockchip,rk3399 + - description: GeekBuying GeekBox items: - const: geekbuying,geekbox @@ -317,6 +329,11 @@ properties: - const: radxa,rock - const: rockchip,rk3188 + - description: Radxa ROCK Pi 4 + items: + - const: radxa,rockpi4 + - const: rockchip,rk3399 + - description: Radxa Rock2 Square items: - const: radxa,rock2-square diff --git a/dts/Bindings/arm/shmobile.txt b/dts/Bindings/arm/shmobile.txt deleted file mode 100644 index 7f91c2a8b5..0000000000 --- a/dts/Bindings/arm/shmobile.txt +++ /dev/null @@ -1,155 +0,0 @@ -Renesas SH-Mobile, R-Mobile, and R-Car Platform Device Tree Bindings --------------------------------------------------------------------- - -SoCs: - - - Emma Mobile EV2 - compatible = "renesas,emev2" - - RZ/A1H (R7S72100) - compatible = "renesas,r7s72100" - - RZ/A2 (R7S9210) - compatible = "renesas,r7s9210" - - SH-Mobile AG5 (R8A73A00/SH73A0) - compatible = "renesas,sh73a0" - - R-Mobile APE6 (R8A73A40) - compatible = "renesas,r8a73a4" - - R-Mobile A1 (R8A77400) - compatible = "renesas,r8a7740" - - RZ/G1H (R8A77420) - compatible = "renesas,r8a7742" - - RZ/G1M (R8A77430) - compatible = "renesas,r8a7743" - - RZ/G1N (R8A77440) - compatible = "renesas,r8a7744" - - RZ/G1E (R8A77450) - compatible = "renesas,r8a7745" - - RZ/G1C (R8A77470) - compatible = "renesas,r8a77470" - - RZ/G2M (R8A774A1) - compatible = "renesas,r8a774a1" - - RZ/G2E (R8A774C0) - compatible = "renesas,r8a774c0" - - R-Car M1A (R8A77781) - compatible = "renesas,r8a7778" - - R-Car H1 (R8A77790) - compatible = "renesas,r8a7779" - - R-Car H2 (R8A77900) - compatible = "renesas,r8a7790" - - R-Car M2-W (R8A77910) - compatible = "renesas,r8a7791" - - R-Car V2H (R8A77920) - compatible = "renesas,r8a7792" - - R-Car M2-N (R8A77930) - compatible = "renesas,r8a7793" - - R-Car E2 (R8A77940) - compatible = "renesas,r8a7794" - - R-Car H3 (R8A77950) - compatible = "renesas,r8a7795" - - R-Car M3-W (R8A77960) - compatible = "renesas,r8a7796" - - R-Car M3-N (R8A77965) - compatible = "renesas,r8a77965" - - R-Car V3M (R8A77970) - compatible = "renesas,r8a77970" - - R-Car V3H (R8A77980) - compatible = "renesas,r8a77980" - - R-Car E3 (R8A77990) - compatible = "renesas,r8a77990" - - R-Car D3 (R8A77995) - compatible = "renesas,r8a77995" - - RZ/N1D (R9A06G032) - compatible = "renesas,r9a06g032" - -Boards: - - - Alt (RTP0RC7794SEB00010S) - compatible = "renesas,alt", "renesas,r8a7794" - - APE6-EVM - compatible = "renesas,ape6evm", "renesas,r8a73a4" - - Atmark Techno Armadillo-800 EVA - compatible = "renesas,armadillo800eva", "renesas,r8a7740" - - Blanche (RTP0RC7792SEB00010S) - compatible = "renesas,blanche", "renesas,r8a7792" - - BOCK-W - compatible = "renesas,bockw", "renesas,r8a7778" - - Condor (RTP0RC77980SEB0010SS/RTP0RC77980SEB0010SA01) - compatible = "renesas,condor", "renesas,r8a77980" - - Draak (RTP0RC77995SEB0010S) - compatible = "renesas,draak", "renesas,r8a77995" - - Eagle (RTP0RC77970SEB0010S) - compatible = "renesas,eagle", "renesas,r8a77970" - - Ebisu (RTP0RC77990SEB0010S) - compatible = "renesas,ebisu", "renesas,r8a77990" - - Genmai (RTK772100BC00000BR) - compatible = "renesas,genmai", "renesas,r7s72100" - - GR-Peach (X28A-M01-E/F) - compatible = "renesas,gr-peach", "renesas,r7s72100" - - Gose (RTP0RC7793SEB00010S) - compatible = "renesas,gose", "renesas,r8a7793" - - H3ULCB (R-Car Starter Kit Premier, RTP0RC7795SKBX0010SA00 (H3 ES1.1)) - H3ULCB (R-Car Starter Kit Premier, RTP0RC77951SKBX010SA00 (H3 ES2.0)) - compatible = "renesas,h3ulcb", "renesas,r8a7795" - - Henninger - compatible = "renesas,henninger", "renesas,r8a7791" - - iWave Systems RZ/G1C Single Board Computer (iW-RainboW-G23S) - compatible = "iwave,g23s", "renesas,r8a77470" - - iWave Systems RZ/G1E SODIMM SOM Development Platform (iW-RainboW-G22D) - compatible = "iwave,g22d", "iwave,g22m", "renesas,r8a7745" - - iWave Systems RZ/G1E SODIMM System On Module (iW-RainboW-G22M-SM) - compatible = "iwave,g22m", "renesas,r8a7745" - - iWave Systems RZ/G1M Qseven Development Platform (iW-RainboW-G20D-Qseven) - compatible = "iwave,g20d", "iwave,g20m", "renesas,r8a7743" - - iWave Systems RZ/G1M Qseven System On Module (iW-RainboW-G20M-Qseven) - compatible = "iwave,g20m", "renesas,r8a7743" - - iWave Systems RZ/G1N Qseven Development Platform (iW-RainboW-G20D-Qseven) - compatible = "iwave,g20d", "iwave,g20m", "renesas,r8a7744" - - iWave Systems RZ/G1N Qseven System On Module (iW-RainboW-G20M-Qseven) - compatible = "iwave,g20m", "renesas,r8a7744" - - Kingfisher (SBEV-RCAR-KF-M03) - compatible = "shimafuji,kingfisher" - - Koelsch (RTP0RC7791SEB00010S) - compatible = "renesas,koelsch", "renesas,r8a7791" - - Kyoto Microcomputer Co. KZM-A9-Dual - compatible = "renesas,kzm9d", "renesas,emev2" - - Kyoto Microcomputer Co. KZM-A9-GT - compatible = "renesas,kzm9g", "renesas,sh73a0" - - Lager (RTP0RC7790SEB00010S) - compatible = "renesas,lager", "renesas,r8a7790" - - M3ULCB (R-Car Starter Kit Pro, RTP0RC7796SKBX0010SA09 (M3 ES1.0)) - compatible = "renesas,m3ulcb", "renesas,r8a7796" - - M3NULCB (R-Car Starter Kit Pro, RTP0RC77965SKBX010SA00 (M3-N ES1.1)) - compatible = "renesas,m3nulcb", "renesas,r8a77965" - - Marzen (R0P7779A00010S) - compatible = "renesas,marzen", "renesas,r8a7779" - - Porter (M2-LCDP) - compatible = "renesas,porter", "renesas,r8a7791" - - RSKRZA1 (YR0K77210C000BE) - compatible = "renesas,rskrza1", "renesas,r7s72100" - - RZN1D-DB (RZ/N1D Demo Board for the RZ/N1D 400 pins package) - compatible = "renesas,rzn1d400-db", "renesas,r9a06g032" - - Salvator-X (RTP0RC7795SIPB0010S) - compatible = "renesas,salvator-x", "renesas,r8a7795" - - Salvator-X (RTP0RC7796SIPB0011S) - compatible = "renesas,salvator-x", "renesas,r8a7796" - - Salvator-X (RTP0RC7796SIPB0011S (M3-N)) - compatible = "renesas,salvator-x", "renesas,r8a77965" - - Salvator-XS (Salvator-X 2nd version, RTP0RC7795SIPB0012S) - compatible = "renesas,salvator-xs", "renesas,r8a7795" - - Salvator-XS (Salvator-X 2nd version, RTP0RC7796SIPB0012S) - compatible = "renesas,salvator-xs", "renesas,r8a7796" - - Salvator-XS (Salvator-X 2nd version, RTP0RC77965SIPB012S) - compatible = "renesas,salvator-xs", "renesas,r8a77965" - - SILK (RTP0RC7794LCB00011S) - compatible = "renesas,silk", "renesas,r8a7794" - - SK-RZG1E (YR8A77450S000BE) - compatible = "renesas,sk-rzg1e", "renesas,r8a7745" - - SK-RZG1M (YR8A77430S000BE) - compatible = "renesas,sk-rzg1m", "renesas,r8a7743" - - Stout (ADAS Starterkit, Y-R-CAR-ADAS-SKH2-BOARD) - compatible = "renesas,stout", "renesas,r8a7790" - - V3HSK (Y-ASK-RCAR-V3H-WS10) - compatible = "renesas,v3hsk", "renesas,r8a77980" - - V3MSK (Y-ASK-RCAR-V3M-WS10) - compatible = "renesas,v3msk", "renesas,r8a77970" - - Wheat (RTP0RC7792ASKB0000JE) - compatible = "renesas,wheat", "renesas,r8a7792" diff --git a/dts/Bindings/arm/socionext/milbeaut.yaml b/dts/Bindings/arm/socionext/milbeaut.yaml new file mode 100644 index 0000000000..aae53fc3cb --- /dev/null +++ b/dts/Bindings/arm/socionext/milbeaut.yaml @@ -0,0 +1,22 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/milbeaut.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Milbeaut platforms device tree bindings + +maintainers: + - Taichi Sugaya <sugaya.taichi@socionext.com> + - Takao Orito <orito.takao@socionext.com> + +properties: + $nodename: + const: '/' + compatible: + oneOf: + - items: + - enum: + - socionext,milbeaut-m10v-evb + - const: socionext,sc2000a +... diff --git a/dts/Bindings/arm/technologic.txt b/dts/Bindings/arm/technologic.txt deleted file mode 100644 index f1cedc00dc..0000000000 --- a/dts/Bindings/arm/technologic.txt +++ /dev/null @@ -1,23 +0,0 @@ -Technologic Systems Platforms Device Tree Bindings --------------------------------------------------- - -TS-4600 is a System-on-Module based on the Freescale i.MX28 System-on-Chip. -It can be mounted on a carrier board providing additional peripheral connectors. -Required root node properties: - - compatible = "technologic,imx28-ts4600", "fsl,imx28" - -TS-4800 board -Required root node properties: - - compatible = "technologic,imx51-ts4800", "fsl,imx51"; - -TS-4900 is a System-on-Module based on the Freescale i.MX6 System-on-Chip. -It can be mounted on a carrier board providing additional peripheral connectors. -Required root node properties: - - compatible = "technologic,imx6dl-ts4900", "fsl,imx6dl" - - compatible = "technologic,imx6q-ts4900", "fsl,imx6q" - -TS-7970 is a System-on-Module based on the Freescale i.MX6 System-on-Chip. -It can be mounted on a carrier board providing additional peripheral connectors. -Required root node properties: - - compatible = "technologic,imx6dl-ts7970", "fsl,imx6dl" - - compatible = "technologic,imx6q-ts7970", "fsl,imx6q" diff --git a/dts/Bindings/arm/tegra.yaml b/dts/Bindings/arm/tegra.yaml index fbcde8a7e0..60b38eb5c6 100644 --- a/dts/Bindings/arm/tegra.yaml +++ b/dts/Bindings/arm/tegra.yaml @@ -87,9 +87,11 @@ properties: - const: nvidia,tegra124 - items: - enum: + - nvidia,darcy - nvidia,p2371-0000 - nvidia,p2371-2180 - nvidia,p2571 + - nvidia,p2894-0050-a08 - const: nvidia,tegra210 - items: - enum: diff --git a/dts/Bindings/bus/imx-weim.txt b/dts/Bindings/bus/imx-weim.txt index 683eaf3aed..dda7d6d664 100644 --- a/dts/Bindings/bus/imx-weim.txt +++ b/dts/Bindings/bus/imx-weim.txt @@ -47,9 +47,9 @@ Optional properties: Timing property for child nodes. It is mandatory, not optional. - fsl,weim-cs-timing: The timing array, contains timing values for the - child node. We can get the CS index from the child - node's "reg" property. The number of registers depends - on the selected chip. + child node. We get the CS indexes from the address + ranges in the child node's "reg" property. + The number of registers depends on the selected chip: For i.MX1, i.MX21 ("fsl,imx1-weim") there are two registers: CSxU, CSxL. For i.MX25, i.MX27, i.MX31 and i.MX35 ("fsl,imx27-weim") @@ -80,3 +80,29 @@ Example for an imx6q-sabreauto board, the NOR flash connected to the WEIM: 0x0000c000 0x1404a38e 0x00000000>; }; }; + +Example for an imx6q-based board, a multi-chipselect device connected to WEIM: + +In this case, both chip select 0 and 1 will be configured with the same timing +array values. + + weim: weim@21b8000 { + compatible = "fsl,imx6q-weim"; + reg = <0x021b8000 0x4000>; + clocks = <&clks 196>; + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0x08000000 0x02000000 + 1 0 0x0a000000 0x02000000 + 2 0 0x0c000000 0x02000000 + 3 0 0x0e000000 0x02000000>; + fsl,weim-cs-gpr = <&gpr>; + + acme@0 { + compatible = "acme,whatever"; + reg = <0 0 0x100>, <0 0x400000 0x800>, + <1 0x400000 0x800>; + fsl,weim-cs-timing = <0x024400b1 0x00001010 0x20081100 + 0x00000000 0xa0000240 0x00000000>; + }; + }; diff --git a/dts/Bindings/clock/actions,owl-cmu.txt b/dts/Bindings/clock/actions,owl-cmu.txt index 2ef86ae96d..d19885b7c7 100644 --- a/dts/Bindings/clock/actions,owl-cmu.txt +++ b/dts/Bindings/clock/actions,owl-cmu.txt @@ -2,13 +2,14 @@ The Actions Semi Owl Clock Management Unit generates and supplies clock to various controllers within the SoC. The clock binding described here is -applicable to S900 and S700 SoC's. +applicable to S900, S700 and S500 SoC's. Required Properties: - compatible: should be one of the following, "actions,s900-cmu" "actions,s700-cmu" + "actions,s500-cmu" - reg: physical base address of the controller and length of memory mapped region. - clocks: Reference to the parent clocks ("hosc", "losc") @@ -19,8 +20,8 @@ Each clock is assigned an identifier, and client nodes can use this identifier to specify the clock which they consume. All available clocks are defined as preprocessor macros in corresponding -dt-bindings/clock/actions,s900-cmu.h or actions,s700-cmu.h header and can be -used in device tree sources. +dt-bindings/clock/actions,s900-cmu.h or actions,s700-cmu.h or +actions,s500-cmu.h header and can be used in device tree sources. External clocks: diff --git a/dts/Bindings/clock/amlogic,gxbb-aoclkc.txt b/dts/Bindings/clock/amlogic,gxbb-aoclkc.txt index 79511d7bb3..c41f0be5d4 100644 --- a/dts/Bindings/clock/amlogic,gxbb-aoclkc.txt +++ b/dts/Bindings/clock/amlogic,gxbb-aoclkc.txt @@ -10,6 +10,7 @@ Required Properties: - GXL (S905X, S905D) : "amlogic,meson-gxl-aoclkc" - GXM (S912) : "amlogic,meson-gxm-aoclkc" - AXG (A113D, A113X) : "amlogic,meson-axg-aoclkc" + - G12A (S905X2, S905D2, S905Y2) : "amlogic,meson-g12a-aoclkc" followed by the common "amlogic,meson-gx-aoclkc" - clocks: list of clock phandle, one for each entry clock-names. - clock-names: should contain the following: diff --git a/dts/Bindings/clock/amlogic,gxbb-clkc.txt b/dts/Bindings/clock/amlogic,gxbb-clkc.txt index a6871953bf..5c8b105be4 100644 --- a/dts/Bindings/clock/amlogic,gxbb-clkc.txt +++ b/dts/Bindings/clock/amlogic,gxbb-clkc.txt @@ -9,6 +9,7 @@ Required Properties: "amlogic,gxbb-clkc" for GXBB SoC, "amlogic,gxl-clkc" for GXL and GXM SoC, "amlogic,axg-clkc" for AXG SoC. + "amlogic,g12a-clkc" for G12A SoC. - clocks : list of clock phandle, one for each entry clock-names. - clock-names : should contain the following: * "xtal": the platform xtal diff --git a/dts/Bindings/clock/exynos5433-clock.txt b/dts/Bindings/clock/exynos5433-clock.txt index 50d5897c98..183c327a7d 100644 --- a/dts/Bindings/clock/exynos5433-clock.txt +++ b/dts/Bindings/clock/exynos5433-clock.txt @@ -50,6 +50,8 @@ Required Properties: IPs. - "samsung,exynos5433-cmu-cam1" - clock controller compatible for CMU_CAM1 which generates clocks for Cortex-A5/MIPI_CSIS2/FIMC-LITE_C/FIMC-FD IPs. + - "samsung,exynos5433-cmu-imem" - clock controller compatible for CMU_IMEM + which generates clocks for SSS (Security SubSystem) and SlimSSS IPs. - reg: physical base address of the controller and length of memory mapped region. @@ -168,6 +170,12 @@ Required Properties: - aclk_cam1_400 - aclk_cam1_552 + Input clocks for imem clock controller: + - oscclk + - aclk_imem_sssx_266 + - aclk_imem_266 + - aclk_imem_200 + Optional properties: - power-domains: a phandle to respective power domain node as described by generic PM domain bindings (see power/power_domain.txt for more @@ -469,6 +477,21 @@ Example 2: Examples of clock controller nodes are listed below. power-domains = <&pd_cam1>; }; + cmu_imem: clock-controller@11060000 { + compatible = "samsung,exynos5433-cmu-imem"; + reg = <0x11060000 0x1000>; + #clock-cells = <1>; + + clock-names = "oscclk", + "aclk_imem_sssx_266", + "aclk_imem_266", + "aclk_imem_200"; + clocks = <&xxti>, + <&cmu_top CLK_DIV_ACLK_IMEM_SSSX_266>, + <&cmu_top CLK_DIV_ACLK_IMEM_266>, + <&cmu_top CLK_DIV_ACLK_IMEM_200>; + }; + Example 3: UART controller node that consumes the clock generated by the clock controller. diff --git a/dts/Bindings/clock/fixed-clock.txt b/dts/Bindings/clock/fixed-clock.txt deleted file mode 100644 index 0641a663ad..0000000000 --- a/dts/Bindings/clock/fixed-clock.txt +++ /dev/null @@ -1,23 +0,0 @@ -Binding for simple fixed-rate clock sources. - -This binding uses the common clock binding[1]. - -[1] Documentation/devicetree/bindings/clock/clock-bindings.txt - -Required properties: -- compatible : shall be "fixed-clock". -- #clock-cells : from common clock binding; shall be set to 0. -- clock-frequency : frequency of clock in Hz. Should be a single cell. - -Optional properties: -- clock-accuracy : accuracy of clock in ppb (parts per billion). - Should be a single cell. -- clock-output-names : From common clock binding. - -Example: - clock { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <1000000000>; - clock-accuracy = <100>; - }; diff --git a/dts/Bindings/clock/fixed-clock.yaml b/dts/Bindings/clock/fixed-clock.yaml new file mode 100644 index 0000000000..b657ecd0ef --- /dev/null +++ b/dts/Bindings/clock/fixed-clock.yaml @@ -0,0 +1,44 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/fixed-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Binding for simple fixed-rate clock sources + +maintainers: + - Michael Turquette <mturquette@baylibre.com> + - Stephen Boyd <sboyd@kernel.org> + +properties: + compatible: + const: fixed-clock + + "#clock-cells": + const: 0 + + clock-frequency: true + + clock-accuracy: + description: accuracy of clock in ppb (parts per billion). + $ref: /schemas/types.yaml#/definitions/uint32 + + clock-output-names: + maxItems: 1 + +required: + - compatible + - "#clock-cells" + - clock-frequency + +additionalProperties: false + +examples: + - | + clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <1000000000>; + clock-accuracy = <100>; + }; +... diff --git a/dts/Bindings/clock/fixed-factor-clock.txt b/dts/Bindings/clock/fixed-factor-clock.txt deleted file mode 100644 index 189467a718..0000000000 --- a/dts/Bindings/clock/fixed-factor-clock.txt +++ /dev/null @@ -1,28 +0,0 @@ -Binding for simple fixed factor rate clock sources. - -This binding uses the common clock binding[1]. - -[1] Documentation/devicetree/bindings/clock/clock-bindings.txt - -Required properties: -- compatible : shall be "fixed-factor-clock". -- #clock-cells : from common clock binding; shall be set to 0. -- clock-div: fixed divider. -- clock-mult: fixed multiplier. -- clocks: parent clock. - -Optional properties: -- clock-output-names : From common clock binding. - -Some clocks that require special treatments are also handled by that -driver, with the compatibles: - - allwinner,sun4i-a10-pll3-2x-clk - -Example: - clock { - compatible = "fixed-factor-clock"; - clocks = <&parentclk>; - #clock-cells = <0>; - clock-div = <2>; - clock-mult = <1>; - }; diff --git a/dts/Bindings/clock/fixed-factor-clock.yaml b/dts/Bindings/clock/fixed-factor-clock.yaml new file mode 100644 index 0000000000..b567f8092f --- /dev/null +++ b/dts/Bindings/clock/fixed-factor-clock.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/fixed-factor-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Binding for simple fixed factor rate clock sources + +maintainers: + - Michael Turquette <mturquette@baylibre.com> + - Stephen Boyd <sboyd@kernel.org> + +properties: + compatible: + enum: + - allwinner,sun4i-a10-pll3-2x-clk + - fixed-factor-clock + + "#clock-cells": + const: 0 + + clocks: + maxItems: 1 + + clock-div: + description: Fixed divider + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - minimum: 1 + + clock-mult: + description: Fixed multiplier + $ref: /schemas/types.yaml#/definitions/uint32 + + clock-output-names: + maxItems: 1 + +required: + - compatible + - clocks + - "#clock-cells" + - clock-div + - clock-mult + +additionalProperties: false + +examples: + - | + clock { + compatible = "fixed-factor-clock"; + clocks = <&parentclk>; + #clock-cells = <0>; + clock-div = <2>; + clock-mult = <1>; + }; +... diff --git a/dts/Bindings/clock/fixed-mmio-clock.txt b/dts/Bindings/clock/fixed-mmio-clock.txt new file mode 100644 index 0000000000..c359367fd1 --- /dev/null +++ b/dts/Bindings/clock/fixed-mmio-clock.txt @@ -0,0 +1,24 @@ +Binding for simple memory mapped io fixed-rate clock sources. +The driver reads a clock frequency value from a single 32-bit memory mapped +I/O register and registers it as a fixed rate clock. + +It was designed for test systems, like FPGA, not for complete, finished SoCs. + +This binding uses the common clock binding[1]. + +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt + +Required properties: +- compatible : shall be "fixed-mmio-clock". +- #clock-cells : from common clock binding; shall be set to 0. +- reg : Address and length of the clock value register set. + +Optional properties: +- clock-output-names : From common clock binding. + +Example: +sysclock: sysclock@fd020004 { + #clock-cells = <0>; + compatible = "fixed-mmio-clock"; + reg = <0xfd020004 0x4>; +}; diff --git a/dts/Bindings/clock/imx8mm-clock.txt b/dts/Bindings/clock/imx8mm-clock.txt new file mode 100644 index 0000000000..8e4ab9e619 --- /dev/null +++ b/dts/Bindings/clock/imx8mm-clock.txt @@ -0,0 +1,29 @@ +* Clock bindings for NXP i.MX8M Mini + +Required properties: +- compatible: Should be "fsl,imx8mm-ccm" +- reg: Address and length of the register set +- #clock-cells: Should be <1> +- clocks: list of clock specifiers, must contain an entry for each required + entry in clock-names +- clock-names: should include the following entries: + - "osc_32k" + - "osc_24m" + - "clk_ext1" + - "clk_ext2" + - "clk_ext3" + - "clk_ext4" + +clk: clock-controller@30380000 { + compatible = "fsl,imx8mm-ccm"; + reg = <0x0 0x30380000 0x0 0x10000>; + #clock-cells = <1>; + clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, <&clk_ext2>, + <&clk_ext3>, <&clk_ext4>; + clock-names = "osc_32k", "osc_24m", "clk_ext1", "clk_ext2", + "clk_ext3", "clk_ext4"; +}; + +The clock consumer should specify the desired clock by having the clock +ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx8mm-clock.h +for the full list of i.MX8M Mini clock IDs. diff --git a/dts/Bindings/clock/nvidia,tegra124-dfll.txt b/dts/Bindings/clock/nvidia,tegra124-dfll.txt index dff236f524..958e0ad78c 100644 --- a/dts/Bindings/clock/nvidia,tegra124-dfll.txt +++ b/dts/Bindings/clock/nvidia,tegra124-dfll.txt @@ -8,10 +8,11 @@ the fast CPU cluster. It consists of a free-running voltage controlled oscillator connected to the CPU voltage rail (VDD_CPU), and a closed loop control module that will automatically adjust the VDD_CPU voltage by communicating with an off-chip PMIC either via an I2C bus or via PWM signals. -Currently only the I2C mode is supported by these bindings. Required properties: -- compatible : should be "nvidia,tegra124-dfll" +- compatible : should be one of: + - "nvidia,tegra124-dfll": for Tegra124 + - "nvidia,tegra210-dfll": for Tegra210 - reg : Defines the following set of registers, in the order listed: - registers for the DFLL control logic. - registers for the I2C output logic. @@ -45,10 +46,31 @@ Required properties for the control loop parameters: Optional properties for the control loop parameters: - nvidia,cg-scale: Boolean value, see the field DFLL_PARAMS_CG_SCALE in the TRM. +Optional properties for mode selection: +- nvidia,pwm-to-pmic: Use PWM to control regulator rather then I2C. + Required properties for I2C mode: - nvidia,i2c-fs-rate: I2C transfer rate, if using full speed mode. -Example: +Required properties for PWM mode: +- nvidia,pwm-period-nanoseconds: period of PWM square wave in nanoseconds. +- nvidia,pwm-tristate-microvolts: Regulator voltage in micro volts when PWM + control is disabled and the PWM output is tristated. Note that this voltage is + configured in hardware, typically via a resistor divider. +- nvidia,pwm-min-microvolts: Regulator voltage in micro volts when PWM control + is enabled and PWM output is low. Hence, this is the minimum output voltage + that the regulator supports when PWM control is enabled. +- nvidia,pwm-voltage-step-microvolts: Voltage increase in micro volts + corresponding to a 1/33th increase in duty cycle. Eg the voltage for 2/33th + duty cycle would be: nvidia,pwm-min-microvolts + + nvidia,pwm-voltage-step-microvolts * 2. +- pinctrl-0: I/O pad configuration when PWM control is enabled. +- pinctrl-1: I/O pad configuration when PWM control is disabled. +- pinctrl-names: must include the following entries: + - dvfs_pwm_enable: I/O pad configuration when PWM control is enabled. + - dvfs_pwm_disable: I/O pad configuration when PWM control is disabled. + +Example for I2C: clock@70110000 { compatible = "nvidia,tegra124-dfll"; @@ -76,3 +98,58 @@ clock@70110000 { nvidia,i2c-fs-rate = <400000>; }; + +Example for PWM: + +clock@70110000 { + compatible = "nvidia,tegra124-dfll"; + reg = <0 0x70110000 0 0x100>, /* DFLL control */ + <0 0x70110000 0 0x100>, /* I2C output control */ + <0 0x70110100 0 0x100>, /* Integrated I2C controller */ + <0 0x70110200 0 0x100>; /* Look-up table RAM */ + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA210_CLK_DFLL_SOC>, + <&tegra_car TEGRA210_CLK_DFLL_REF>, + <&tegra_car TEGRA124_CLK_I2C5>;; + clock-names = "soc", "ref", "i2c"; + resets = <&tegra_car TEGRA124_RST_DFLL_DVCO>; + reset-names = "dvco"; + #clock-cells = <0>; + clock-output-names = "dfllCPU_out"; + + nvidia,sample-rate = <25000>; + nvidia,droop-ctrl = <0x00000f00>; + nvidia,force-mode = <1>; + nvidia,cf = <6>; + nvidia,ci = <0>; + nvidia,cg = <2>; + + nvidia,pwm-min-microvolts = <708000>; /* 708mV */ + nvidia,pwm-period-nanoseconds = <2500>; /* 2.5us */ + nvidia,pwm-to-pmic; + nvidia,pwm-tristate-microvolts = <1000000>; + nvidia,pwm-voltage-step-microvolts = <19200>; /* 19.2mV */ + + pinctrl-names = "dvfs_pwm_enable", "dvfs_pwm_disable"; + pinctrl-0 = <&dvfs_pwm_active_state>; + pinctrl-1 = <&dvfs_pwm_inactive_state>; +}; + +/* pinmux nodes added for completeness. Binding doc can be found in: + * Documentation/devicetree/bindings/pinctrl/nvidia,tegra210-pinmux.txt + */ + +pinmux: pinmux@700008d4 { + dvfs_pwm_active_state: dvfs_pwm_active { + dvfs_pwm_pbb1 { + nvidia,pins = "dvfs_pwm_pbb1"; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + }; + dvfs_pwm_inactive_state: dvfs_pwm_inactive { + dvfs_pwm_pbb1 { + nvidia,pins = "dvfs_pwm_pbb1"; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + }; + }; +}; diff --git a/dts/Bindings/clock/qcom,rpmcc.txt b/dts/Bindings/clock/qcom,rpmcc.txt index 87b4949e9b..944719bd58 100644 --- a/dts/Bindings/clock/qcom,rpmcc.txt +++ b/dts/Bindings/clock/qcom,rpmcc.txt @@ -16,6 +16,7 @@ Required properties : "qcom,rpmcc-msm8974", "qcom,rpmcc" "qcom,rpmcc-apq8064", "qcom,rpmcc" "qcom,rpmcc-msm8996", "qcom,rpmcc" + "qcom,rpmcc-msm8998", "qcom,rpmcc" "qcom,rpmcc-qcs404", "qcom,rpmcc" - #clock-cells : shall contain 1 diff --git a/dts/Bindings/cpufreq/nvidia,tegra124-cpufreq.txt b/dts/Bindings/cpufreq/nvidia,tegra124-cpufreq.txt index b1669fbfb7..03196d5ea5 100644 --- a/dts/Bindings/cpufreq/nvidia,tegra124-cpufreq.txt +++ b/dts/Bindings/cpufreq/nvidia,tegra124-cpufreq.txt @@ -9,11 +9,9 @@ Required properties: See ../clocks/clock-bindings.txt for details. - clock-names: Must include the following entries: - cpu_g: Clock mux for the fast CPU cluster. - - cpu_lp: Clock mux for the low-power CPU cluster. - pll_x: Fast PLL clocksource. - pll_p: Auxiliary PLL used during fast PLL rate changes. - dfll: Fast DFLL clocksource that also automatically scales CPU voltage. -- vdd-cpu-supply: Regulator for CPU voltage Optional properties: - clock-latency: Specify the possible maximum transition latency for clock, @@ -31,13 +29,11 @@ cpus { reg = <0>; clocks = <&tegra_car TEGRA124_CLK_CCLK_G>, - <&tegra_car TEGRA124_CLK_CCLK_LP>, <&tegra_car TEGRA124_CLK_PLL_X>, <&tegra_car TEGRA124_CLK_PLL_P>, <&dfll>; - clock-names = "cpu_g", "cpu_lp", "pll_x", "pll_p", "dfll"; + clock-names = "cpu_g", "pll_x", "pll_p", "dfll"; clock-latency = <300000>; - vdd-cpu-supply: <&vdd_cpu>; }; <...> diff --git a/dts/Bindings/crypto/samsung-slimsss.txt b/dts/Bindings/crypto/samsung-slimsss.txt new file mode 100644 index 0000000000..7ec9a5a772 --- /dev/null +++ b/dts/Bindings/crypto/samsung-slimsss.txt @@ -0,0 +1,19 @@ +Samsung SoC SlimSSS (Slim Security SubSystem) module + +The SlimSSS module in Exynos5433 SoC supports the following: +-- Feeder (FeedCtrl) +-- Advanced Encryption Standard (AES) with ECB,CBC,CTR,XTS and (CBC/XTS)/CTS +-- SHA-1/SHA-256 and (SHA-1/SHA-256)/HMAC + +Required properties: + +- compatible : Should contain entry for slimSSS version: + - "samsung,exynos5433-slim-sss" for Exynos5433 SoC. +- reg : Offset and length of the register set for the module +- interrupts : interrupt specifiers of SlimSSS module interrupts (one feed + control interrupt). + +- clocks : list of clock phandle and specifier pairs for all clocks listed in + clock-names property. +- clock-names : list of device clock input names; should contain "pclk" and + "aclk" for slim-sss in Exynos5433. diff --git a/dts/Bindings/display/amlogic,simple-framebuffer.txt b/dts/Bindings/display/amlogic,simple-framebuffer.txt new file mode 100644 index 0000000000..aaa6c24c8e --- /dev/null +++ b/dts/Bindings/display/amlogic,simple-framebuffer.txt @@ -0,0 +1,33 @@ +Meson specific Simple Framebuffer bindings + +This binding documents meson specific extensions to the simple-framebuffer +bindings. The meson simplefb u-boot code relies on the devicetree containing +pre-populated simplefb nodes. + +These extensions are intended so that u-boot can select the right node based +on which pipeline is being used. As such they are solely intended for +firmware / bootloader use, and the OS should ignore them. + +Required properties: +- compatible: "amlogic,simple-framebuffer", "simple-framebuffer" +- amlogic,pipeline, one of: + "vpu-cvbs" + "vpu-hdmi" + +Example: + +chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + simplefb_hdmi: framebuffer-hdmi { + compatible = "amlogic,simple-framebuffer", + "simple-framebuffer"; + amlogic,pipeline = "vpu-hdmi"; + clocks = <&clkc CLKID_HDMI_PCLK>, + <&clkc CLKID_CLK81>, + <&clkc CLKID_GCLK_VENCI_INT0>; + power-domains = <&pwrc_vpu>; + }; +}; diff --git a/dts/Bindings/display/arm,komeda.txt b/dts/Bindings/display/arm,komeda.txt new file mode 100644 index 0000000000..02b226532e --- /dev/null +++ b/dts/Bindings/display/arm,komeda.txt @@ -0,0 +1,73 @@ +Device Tree bindings for Arm Komeda display driver + +Required properties: +- compatible: Should be "arm,mali-d71" +- reg: Physical base address and length of the registers in the system +- interrupts: the interrupt line number of the device in the system +- clocks: A list of phandle + clock-specifier pairs, one for each entry + in 'clock-names' +- clock-names: A list of clock names. It should contain: + - "mclk": for the main processor clock + - "pclk": for the APB interface clock +- #address-cells: Must be 1 +- #size-cells: Must be 0 + +Required properties for sub-node: pipeline@nq +Each device contains one or two pipeline sub-nodes (at least one), each +pipeline node should provide properties: +- reg: Zero-indexed identifier for the pipeline +- clocks: A list of phandle + clock-specifier pairs, one for each entry + in 'clock-names' +- clock-names: should contain: + - "pxclk": pixel clock + - "aclk": AXI interface clock + +- port: each pipeline connect to an encoder input port. The connection is + modeled using the OF graph bindings specified in + Documentation/devicetree/bindings/graph.txt + +Optional properties: + - memory-region: phandle to a node describing memory (see + Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt) + to be used for the framebuffer; if not present, the framebuffer may + be located anywhere in memory. + +Example: +/ { + ... + + dp0: display@c00000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "arm,mali-d71"; + reg = <0xc00000 0x20000>; + interrupts = <0 168 4>; + clocks = <&dpu_mclk>, <&dpu_aclk>; + clock-names = "mclk", "pclk"; + + dp0_pipe0: pipeline@0 { + clocks = <&fpgaosc2>, <&dpu_aclk>; + clock-names = "pxclk", "aclk"; + reg = <0>; + + port { + dp0_pipe0_out: endpoint { + remote-endpoint = <&db_dvi0_in>; + }; + }; + }; + + dp0_pipe1: pipeline@1 { + clocks = <&fpgaosc2>, <&dpu_aclk>; + clock-names = "pxclk", "aclk"; + reg = <1>; + + port { + dp0_pipe1_out: endpoint { + remote-endpoint = <&db_dvi1_in>; + }; + }; + }; + }; + ... +}; diff --git a/dts/Bindings/display/bridge/cdns,dsi.txt b/dts/Bindings/display/bridge/cdns,dsi.txt index f5725bb6c6..525a4bfd86 100644 --- a/dts/Bindings/display/bridge/cdns,dsi.txt +++ b/dts/Bindings/display/bridge/cdns,dsi.txt @@ -31,28 +31,7 @@ Required subnodes: - one subnode per DSI device connected on the DSI bus. Each DSI device should contain a reg property encoding its virtual channel. -Cadence DPHY -============ - -Cadence DPHY block. - -Required properties: -- compatible: should be set to "cdns,dphy". -- reg: physical base address and length of the DPHY registers. -- clocks: DPHY reference clocks. -- clock-names: must contain "psm" and "pll_ref". -- #phy-cells: must be set to 0. - - Example: - dphy0: dphy@fd0e0000{ - compatible = "cdns,dphy"; - reg = <0x0 0xfd0e0000 0x0 0x1000>; - clocks = <&psm_clk>, <&pll_ref_clk>; - clock-names = "psm", "pll_ref"; - #phy-cells = <0>; - }; - dsi0: dsi@fd0c0000 { compatible = "cdns,dsi"; reg = <0x0 0xfd0c0000 0x0 0x1000>; diff --git a/dts/Bindings/display/bridge/lvds-transmitter.txt b/dts/Bindings/display/bridge/lvds-transmitter.txt index 50220190c2..60091db5df 100644 --- a/dts/Bindings/display/bridge/lvds-transmitter.txt +++ b/dts/Bindings/display/bridge/lvds-transmitter.txt @@ -22,13 +22,11 @@ among others. Required properties: -- compatible: Must be one or more of the following - - "ti,ds90c185" for the TI DS90C185 FPD-Link Serializer - - "lvds-encoder" for a generic LVDS encoder device +- compatible: Must be "lvds-encoder" - When compatible with the generic version, nodes must list the - device-specific version corresponding to the device first - followed by the generic version. + Any encoder compatible with this generic binding, but with additional + properties not listed here, must list a device specific compatible first + followed by this generic compatible. Required nodes: @@ -44,8 +42,6 @@ Example lvds-encoder { compatible = "lvds-encoder"; - #address-cells = <1>; - #size-cells = <0>; ports { #address-cells = <1>; diff --git a/dts/Bindings/display/bridge/renesas,lvds.txt b/dts/Bindings/display/bridge/renesas,lvds.txt index ba5469dd09..900a884ad9 100644 --- a/dts/Bindings/display/bridge/renesas,lvds.txt +++ b/dts/Bindings/display/bridge/renesas,lvds.txt @@ -8,6 +8,8 @@ Required properties: - compatible : Shall contain one of - "renesas,r8a7743-lvds" for R8A7743 (RZ/G1M) compatible LVDS encoders + - "renesas,r8a7744-lvds" for R8A7744 (RZ/G1N) compatible LVDS encoders + - "renesas,r8a774c0-lvds" for R8A774C0 (RZ/G2E) compatible LVDS encoders - "renesas,r8a7790-lvds" for R8A7790 (R-Car H2) compatible LVDS encoders - "renesas,r8a7791-lvds" for R8A7791 (R-Car M2-W) compatible LVDS encoders - "renesas,r8a7793-lvds" for R8A7793 (R-Car M2-N) compatible LVDS encoders @@ -25,7 +27,7 @@ Required properties: - clock-names: Name of the clocks. This property is model-dependent. - The functional clock, which mandatory for all models, shall be listed first, and shall be named "fck". - - On R8A77990 and R8A77995, the LVDS encoder can use the EXTAL or + - On R8A77990, R8A77995 and R8A774C0, the LVDS encoder can use the EXTAL or DU_DOTCLKINx clocks. Those clocks are optional. When supplied they must be named "extal" and "dclkin.x" respectively, with "x" being the DU_DOTCLKIN numerical index. diff --git a/dts/Bindings/display/bridge/thine,thc63lvdm83d.txt b/dts/Bindings/display/bridge/thine,thc63lvdm83d.txt index 527e236e9a..fee3c88e1a 100644 --- a/dts/Bindings/display/bridge/thine,thc63lvdm83d.txt +++ b/dts/Bindings/display/bridge/thine,thc63lvdm83d.txt @@ -10,7 +10,7 @@ Required properties: Optional properties: -- pwdn-gpios: Power down control GPIO +- powerdown-gpios: Power down control GPIO (the /PWDN pin, active low). Required nodes: diff --git a/dts/Bindings/display/bridge/ti,ds90c185.txt b/dts/Bindings/display/bridge/ti,ds90c185.txt new file mode 100644 index 0000000000..e575f99695 --- /dev/null +++ b/dts/Bindings/display/bridge/ti,ds90c185.txt @@ -0,0 +1,55 @@ +Texas Instruments FPD-Link (LVDS) Serializer +-------------------------------------------- + +The DS90C185 and DS90C187 are low-power serializers for portable +battery-powered applications that reduces the size of the RGB +interface between the host GPU and the display. + +Required properties: + +- compatible: Should be + "ti,ds90c185", "lvds-encoder" for the TI DS90C185 FPD-Link Serializer + "ti,ds90c187", "lvds-encoder" for the TI DS90C187 FPD-Link Serializer + +Optional properties: + +- powerdown-gpios: Power down control GPIO (the PDB pin, active-low) + +Required nodes: + +The devices have two video ports. Their connections are modeled using the OF +graph bindings specified in Documentation/devicetree/bindings/graph.txt. + +- Video port 0 for parallel input +- Video port 1 for LVDS output + + +Example +------- + +lvds-encoder { + compatible = "ti,ds90c185", "lvds-encoder"; + + powerdown-gpios = <&gpio 17 GPIO_ACTIVE_LOW>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + lvds_enc_in: endpoint { + remote-endpoint = <&lcdc_out_rgb>; + }; + }; + + port@1 { + reg = <1>; + + lvds_enc_out: endpoint { + remote-endpoint = <&lvds_panel_in>; + }; + }; + }; +}; diff --git a/dts/Bindings/display/msm/gmu.txt b/dts/Bindings/display/msm/gmu.txt new file mode 100644 index 0000000000..3439b38e60 --- /dev/null +++ b/dts/Bindings/display/msm/gmu.txt @@ -0,0 +1,59 @@ +Qualcomm adreno/snapdragon GMU (Graphics management unit) + +The GMU is a programmable power controller for the GPU. the CPU controls the +GMU which in turn handles power controls for the GPU. + +Required properties: +- compatible: "qcom,adreno-gmu-XYZ.W", "qcom,adreno-gmu" + for example: "qcom,adreno-gmu-630.2", "qcom,adreno-gmu" + Note that you need to list the less specific "qcom,adreno-gmu" + for generic matches and the more specific identifier to identify + the specific device. +- reg: Physical base address and length of the GMU registers. +- reg-names: Matching names for the register regions + * "gmu" + * "gmu_pdc" + * "gmu_pdc_seg" +- interrupts: The interrupt signals from the GMU. +- interrupt-names: Matching names for the interrupts + * "hfi" + * "gmu" +- clocks: phandles to the device clocks +- clock-names: Matching names for the clocks + * "gmu" + * "cxo" + * "axi" + * "mnoc" +- power-domains: should be <&clock_gpucc GPU_CX_GDSC> +- iommus: phandle to the adreno iommu +- operating-points-v2: phandle to the OPP operating points + +Example: + +/ { + ... + + gmu: gmu@506a000 { + compatible="qcom,adreno-gmu-630.2", "qcom,adreno-gmu"; + + reg = <0x506a000 0x30000>, + <0xb280000 0x10000>, + <0xb480000 0x10000>; + reg-names = "gmu", "gmu_pdc", "gmu_pdc_seq"; + + interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hfi", "gmu"; + + clocks = <&gpucc GPU_CC_CX_GMU_CLK>, + <&gpucc GPU_CC_CXO_CLK>, + <&gcc GCC_DDRSS_GPU_AXI_CLK>, + <&gcc GCC_GPU_MEMNOC_GFX_CLK>; + clock-names = "gmu", "cxo", "axi", "memnoc"; + + power-domains = <&gpucc GPU_CX_GDSC>; + iommus = <&adreno_smmu 5>; + + operating-points-v2 = <&gmu_opp_table>; + }; +}; diff --git a/dts/Bindings/display/msm/gpu.txt b/dts/Bindings/display/msm/gpu.txt index f8759145ce..aad1aef682 100644 --- a/dts/Bindings/display/msm/gpu.txt +++ b/dts/Bindings/display/msm/gpu.txt @@ -10,14 +10,23 @@ Required properties: If "amd,imageon" is used, there should be no top level msm device. - reg: Physical base address and length of the controller's registers. - interrupts: The interrupt signal from the gpu. -- clocks: device clocks +- clocks: device clocks (if applicable) See ../clocks/clock-bindings.txt for details. -- clock-names: the following clocks are required: +- clock-names: the following clocks are required by a3xx, a4xx and a5xx + cores: * "core" * "iface" * "mem_iface" + For GMU attached devices the GPU clocks are not used and are not required. The + following devices should not list clocks: + - qcom,adreno-630.2 +- iommus: optional phandle to an adreno iommu instance +- operating-points-v2: optional phandle to the OPP operating points +- qcom,gmu: For GMU attached devices a phandle to the GMU device that will + control the power for the GPU. Applicable targets: + - qcom,adreno-630.2 -Example: +Example 3xx/4xx/a5xx: / { ... @@ -37,3 +46,30 @@ Example: <&mmcc MMSS_IMEM_AHB_CLK>; }; }; + +Example a6xx (with GMU): + +/ { + ... + + gpu@5000000 { + compatible = "qcom,adreno-630.2", "qcom,adreno"; + #stream-id-cells = <16>; + + reg = <0x5000000 0x40000>, <0x509e000 0x10>; + reg-names = "kgsl_3d0_reg_memory", "cx_mem"; + + /* + * Look ma, no clocks! The GPU clocks and power are + * controlled entirely by the GMU + */ + + interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>; + + iommus = <&adreno_smmu 0>; + + operating-points-v2 = <&gpu_opp_table>; + + qcom,gmu = <&gmu>; + }; +}; diff --git a/dts/Bindings/display/panel/auo,g101evn010 b/dts/Bindings/display/panel/auo,g101evn010.txt index bc6a0c858e..bc6a0c858e 100644 --- a/dts/Bindings/display/panel/auo,g101evn010 +++ b/dts/Bindings/display/panel/auo,g101evn010.txt diff --git a/dts/Bindings/display/panel/innolux,ee101ia-01d.txt b/dts/Bindings/display/panel/innolux,ee101ia-01d.txt new file mode 100644 index 0000000000..e5ca4ccd55 --- /dev/null +++ b/dts/Bindings/display/panel/innolux,ee101ia-01d.txt @@ -0,0 +1,7 @@ +Innolux Corporation 10.1" EE101IA-01D WXGA (1280x800) LVDS panel + +Required properties: +- compatible: should be "innolux,ee101ia-01d" + +This binding is compatible with the lvds-panel binding, which is specified +in panel-lvds.txt in this directory. diff --git a/dts/Bindings/display/panel/lemaker,bl035-rgb-002.txt b/dts/Bindings/display/panel/lemaker,bl035-rgb-002.txt new file mode 100644 index 0000000000..74ee7ea6b4 --- /dev/null +++ b/dts/Bindings/display/panel/lemaker,bl035-rgb-002.txt @@ -0,0 +1,12 @@ +LeMaker BL035-RGB-002 3.5" QVGA TFT LCD panel + +Required properties: +- compatible: should be "lemaker,bl035-rgb-002" +- power-supply: as specified in the base binding + +Optional properties: +- backlight: as specified in the base binding +- enable-gpios: as specified in the base binding + +This binding is compatible with the simple-panel binding, which is specified +in simple-panel.txt in this directory. diff --git a/dts/Bindings/display/panel/pda,91-00156-a0.txt b/dts/Bindings/display/panel/pda,91-00156-a0.txt new file mode 100644 index 0000000000..1639fb17a9 --- /dev/null +++ b/dts/Bindings/display/panel/pda,91-00156-a0.txt @@ -0,0 +1,14 @@ +PDA 91-00156-A0 5.0" WVGA TFT LCD panel + +Required properties: +- compatible: should be "pda,91-00156-a0" +- power-supply: this panel requires a single power supply. A phandle to a +regulator needs to be specified here. Compatible with panel-common binding which +is specified in the panel-common.txt in this directory. +- backlight: this panel's backlight is controlled by an external backlight +controller. A phandle to this controller needs to be specified here. +Compatible with panel-common binding which is specified in the panel-common.txt +in this directory. + +This binding is compatible with the simple-panel binding, which is specified +in simple-panel.txt in this directory. diff --git a/dts/Bindings/display/panel/sitronix,st7701.txt b/dts/Bindings/display/panel/sitronix,st7701.txt new file mode 100644 index 0000000000..ccd17597f1 --- /dev/null +++ b/dts/Bindings/display/panel/sitronix,st7701.txt @@ -0,0 +1,30 @@ +Sitronix ST7701 based LCD panels + +ST7701 designed for small and medium sizes of TFT LCD display, is +capable of supporting up to 480RGBX864 in resolution. It provides +several system interfaces like MIPI/RGB/SPI. + +Techstar TS8550B is 480x854, 2-lane MIPI DSI LCD panel which has +inbuilt ST7701 chip. + +Required properties: +- compatible: must be "sitronix,st7701" and one of + * "techstar,ts8550b" +- reset-gpios: a GPIO phandle for the reset pin + +Required properties for techstar,ts8550b: +- reg: DSI virtual channel used by that screen +- VCC-supply: analog regulator for MIPI circuit +- IOVCC-supply: I/O system regulator + +Optional properties: +- backlight: phandle for the backlight control. + +panel@0 { + compatible = "techstar,ts8550b", "sitronix,st7701"; + reg = <0>; + VCC-supply = <®_dldo2>; + IOVCC-supply = <®_dldo2>; + reset-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* LCD-RST: PD24 */ + backlight = <&backlight>; +}; diff --git a/dts/Bindings/display/renesas,du.txt b/dts/Bindings/display/renesas,du.txt index 3c855d9f27..aedb22b4d1 100644 --- a/dts/Bindings/display/renesas,du.txt +++ b/dts/Bindings/display/renesas,du.txt @@ -7,6 +7,7 @@ Required Properties: - "renesas,du-r8a7744" for R8A7744 (RZ/G1N) compatible DU - "renesas,du-r8a7745" for R8A7745 (RZ/G1E) compatible DU - "renesas,du-r8a77470" for R8A77470 (RZ/G1C) compatible DU + - "renesas,du-r8a774c0" for R8A774C0 (RZ/G2E) compatible DU - "renesas,du-r8a7779" for R8A7779 (R-Car H1) compatible DU - "renesas,du-r8a7790" for R8A7790 (R-Car H2) compatible DU - "renesas,du-r8a7791" for R8A7791 (R-Car M2-W) compatible DU @@ -57,6 +58,7 @@ corresponding to each DU output. R8A7744 (RZ/G1N) DPAD 0 LVDS 0 - - R8A7745 (RZ/G1E) DPAD 0 DPAD 1 - - R8A77470 (RZ/G1C) DPAD 0 DPAD 1 LVDS 0 - + R8A774C0 (RZ/G2E) DPAD 0 LVDS 0 LVDS 1 - R8A7779 (R-Car H1) DPAD 0 DPAD 1 - - R8A7790 (R-Car H2) DPAD 0 LVDS 0 LVDS 1 - R8A7791 (R-Car M2-W) DPAD 0 LVDS 0 - - diff --git a/dts/Bindings/display/rockchip/rockchip-vop.txt b/dts/Bindings/display/rockchip/rockchip-vop.txt index b79e5769f0..4f58c5a2d1 100644 --- a/dts/Bindings/display/rockchip/rockchip-vop.txt +++ b/dts/Bindings/display/rockchip/rockchip-vop.txt @@ -10,6 +10,7 @@ Required properties: "rockchip,rk3126-vop"; "rockchip,px30-vop-lit"; "rockchip,px30-vop-big"; + "rockchip,rk3066-vop"; "rockchip,rk3188-vop"; "rockchip,rk3288-vop"; "rockchip,rk3368-vop"; diff --git a/dts/Bindings/display/sitronix,st7735r.txt b/dts/Bindings/display/sitronix,st7735r.txt index f0a5090a33..cd5c718689 100644 --- a/dts/Bindings/display/sitronix,st7735r.txt +++ b/dts/Bindings/display/sitronix,st7735r.txt @@ -20,7 +20,7 @@ Example: backlight: backlight { compatible = "gpio-backlight"; gpios = <&gpio 44 GPIO_ACTIVE_HIGH>; - } + }; ... diff --git a/dts/Bindings/display/ssd1307fb.txt b/dts/Bindings/display/ssd1307fb.txt index 209d931ef1..b67f8caa21 100644 --- a/dts/Bindings/display/ssd1307fb.txt +++ b/dts/Bindings/display/ssd1307fb.txt @@ -36,7 +36,6 @@ ssd1307: oled@3c { reg = <0x3c>; pwms = <&pwm 4 3000>; reset-gpios = <&gpio2 7>; - reset-active-low; }; ssd1306: oled@3c { @@ -44,7 +43,6 @@ ssd1306: oled@3c { reg = <0x3c>; pwms = <&pwm 4 3000>; reset-gpios = <&gpio2 7>; - reset-active-low; solomon,com-lrremap; solomon,com-invdir; solomon,com-offset = <32>; diff --git a/dts/Bindings/display/sunxi/sun4i-drm.txt b/dts/Bindings/display/sunxi/sun4i-drm.txt index f426bdb42f..31ab72cba3 100644 --- a/dts/Bindings/display/sunxi/sun4i-drm.txt +++ b/dts/Bindings/display/sunxi/sun4i-drm.txt @@ -156,6 +156,7 @@ Required properties: * allwinner,sun6i-a31-tcon * allwinner,sun6i-a31s-tcon * allwinner,sun7i-a20-tcon + * allwinner,sun8i-a23-tcon * allwinner,sun8i-a33-tcon * allwinner,sun8i-a83t-tcon-lcd * allwinner,sun8i-a83t-tcon-tv @@ -276,6 +277,7 @@ Required properties: - compatible: value must be one of: * allwinner,sun6i-a31-drc * allwinner,sun6i-a31s-drc + * allwinner,sun8i-a23-drc * allwinner,sun8i-a33-drc * allwinner,sun9i-a80-drc - reg: base address and size of the memory-mapped region. @@ -303,6 +305,7 @@ Required properties: * allwinner,sun5i-a13-display-backend * allwinner,sun6i-a31-display-backend * allwinner,sun7i-a20-display-backend + * allwinner,sun8i-a23-display-backend * allwinner,sun8i-a33-display-backend * allwinner,sun9i-a80-display-backend - reg: base address and size of the memory-mapped region. @@ -360,6 +363,7 @@ Required properties: * allwinner,sun5i-a13-display-frontend * allwinner,sun6i-a31-display-frontend * allwinner,sun7i-a20-display-frontend + * allwinner,sun8i-a23-display-frontend * allwinner,sun8i-a33-display-frontend * allwinner,sun9i-a80-display-frontend - reg: base address and size of the memory-mapped region. @@ -419,6 +423,7 @@ Required properties: * allwinner,sun6i-a31-display-engine * allwinner,sun6i-a31s-display-engine * allwinner,sun7i-a20-display-engine + * allwinner,sun8i-a23-display-engine * allwinner,sun8i-a33-display-engine * allwinner,sun8i-a83t-display-engine * allwinner,sun8i-h3-display-engine diff --git a/dts/Bindings/display/tegra/nvidia,tegra20-host1x.txt b/dts/Bindings/display/tegra/nvidia,tegra20-host1x.txt index 593be44a53..9999255ac5 100644 --- a/dts/Bindings/display/tegra/nvidia,tegra20-host1x.txt +++ b/dts/Bindings/display/tegra/nvidia,tegra20-host1x.txt @@ -238,6 +238,9 @@ of the following host1x client modules: - nvidia,hpd-gpio: specifies a GPIO used for hotplug detection - nvidia,edid: supplies a binary EDID blob - nvidia,panel: phandle of a display panel + - nvidia,xbar-cfg: 5 cells containing the crossbar configuration. Each lane + of the SOR, identified by the cell's index, is mapped via the crossbar to + the pad specified by the cell's value. Optional properties when driving an eDP output: - nvidia,dpaux: phandle to a DispayPort AUX interface diff --git a/dts/Bindings/dma/dma.txt b/dts/Bindings/dma/dma.txt index 6312fb00ce..eeb4e4d177 100644 --- a/dts/Bindings/dma/dma.txt +++ b/dts/Bindings/dma/dma.txt @@ -16,6 +16,9 @@ Optional properties: - dma-channels: Number of DMA channels supported by the controller. - dma-requests: Number of DMA request signals supported by the controller. +- dma-channel-mask: Bitmask of available DMA channels in ascending order + that are not reserved by firmware and are available to + the kernel. i.e. first channel corresponds to LSB. Example: @@ -29,6 +32,7 @@ Example: #dma-cells = <1>; dma-channels = <32>; dma-requests = <127>; + dma-channel-mask = <0xfffe> }; * DMA router diff --git a/dts/Bindings/dma/fsl-qdma.txt b/dts/Bindings/dma/fsl-qdma.txt new file mode 100644 index 0000000000..6a0ff9059e --- /dev/null +++ b/dts/Bindings/dma/fsl-qdma.txt @@ -0,0 +1,57 @@ +NXP Layerscape SoC qDMA Controller +================================== + +This device follows the generic DMA bindings defined in dma/dma.txt. + +Required properties: + +- compatible: Must be one of + "fsl,ls1021a-qdma": for LS1021A Board + "fsl,ls1043a-qdma": for ls1043A Board + "fsl,ls1046a-qdma": for ls1046A Board +- reg: Should contain the register's base address and length. +- interrupts: Should contain a reference to the interrupt used by this + device. +- interrupt-names: Should contain interrupt names: + "qdma-queue0": the block0 interrupt + "qdma-queue1": the block1 interrupt + "qdma-queue2": the block2 interrupt + "qdma-queue3": the block3 interrupt + "qdma-error": the error interrupt +- fsl,dma-queues: Should contain number of queues supported. +- dma-channels: Number of DMA channels supported +- block-number: the virtual block number +- block-offset: the offset of different virtual block +- status-sizes: status queue size of per virtual block +- queue-sizes: command queue size of per virtual block, the size number + based on queues + +Optional properties: + +- dma-channels: Number of DMA channels supported by the controller. +- big-endian: If present registers and hardware scatter/gather descriptors + of the qDMA are implemented in big endian mode, otherwise in little + mode. + +Examples: + + qdma: dma-controller@8390000 { + compatible = "fsl,ls1021a-qdma"; + reg = <0x0 0x8388000 0x0 0x1000>, /* Controller regs */ + <0x0 0x8389000 0x0 0x1000>, /* Status regs */ + <0x0 0x838a000 0x0 0x2000>; /* Block regs */ + interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "qdma-error", + "qdma-queue0", "qdma-queue1"; + dma-channels = <8>; + block-number = <2>; + block-offset = <0x1000>; + fsl,dma-queues = <2>; + status-sizes = <64>; + queue-sizes = <64 64>; + big-endian; + }; + +DMA clients must use the format described in dma/dma.txt file. diff --git a/dts/Bindings/dma/k3dma.txt b/dts/Bindings/dma/k3dma.txt index 4945aeac4d..10a2f15b08 100644 --- a/dts/Bindings/dma/k3dma.txt +++ b/dts/Bindings/dma/k3dma.txt @@ -3,7 +3,9 @@ See dma.txt first Required properties: -- compatible: Should be "hisilicon,k3-dma-1.0" +- compatible: Must be one of +- "hisilicon,k3-dma-1.0" +- "hisilicon,hisi-pcm-asp-dma-1.0" - reg: Should contain DMA registers location and length. - interrupts: Should contain one interrupt shared by all channel - #dma-cells: see dma.txt, should be 1, para number diff --git a/dts/Bindings/dma/snps-dma.txt b/dts/Bindings/dma/snps-dma.txt index db757df705..0bedceed19 100644 --- a/dts/Bindings/dma/snps-dma.txt +++ b/dts/Bindings/dma/snps-dma.txt @@ -23,8 +23,6 @@ Deprecated properties: Optional properties: -- is_private: The device channels should be marked as private and not for by the - general purpose DMA channel allocator. False if not passed. - multi-block: Multi block transfers supported by hardware. Array property with one cell per channel. 0: not supported, 1 (default): supported. - snps,dma-protection-control: AHB HPROT[3:1] protection setting. diff --git a/dts/Bindings/dma/sprd-dma.txt b/dts/Bindings/dma/sprd-dma.txt index 7a10fea2e5..adccea9941 100644 --- a/dts/Bindings/dma/sprd-dma.txt +++ b/dts/Bindings/dma/sprd-dma.txt @@ -31,7 +31,7 @@ DMA clients connected to the Spreadtrum DMA controller must use the format described in the dma.txt file, using a two-cell specifier for each channel. The two cells in order are: 1. A phandle pointing to the DMA controller. -2. The channel id. +2. The slave id. spi0: spi@70a00000{ ... diff --git a/dts/Bindings/dma/xilinx/xilinx_dma.txt b/dts/Bindings/dma/xilinx/xilinx_dma.txt index 174af2c45e..93b6d961dd 100644 --- a/dts/Bindings/dma/xilinx/xilinx_dma.txt +++ b/dts/Bindings/dma/xilinx/xilinx_dma.txt @@ -37,10 +37,11 @@ Required properties: Required properties for VDMA: - xlnx,num-fstores: Should be the number of framebuffers as configured in h/w. -Optional properties: -- xlnx,include-sg: Tells configured for Scatter-mode in - the hardware. Optional properties for AXI DMA: +- xlnx,sg-length-width: Should be set to the width in bits of the length + register as configured in h/w. Takes values {8...26}. If the property + is missing or invalid then the default value 23 is used. This is the + maximum value that is supported by all IP versions. - xlnx,mcdma: Tells whether configured for multi-channel mode in the hardware. Optional properties for VDMA: - xlnx,flush-fsync: Tells which channel to Flush on Frame sync. diff --git a/dts/Bindings/edac/aspeed-sdram-edac.txt b/dts/Bindings/edac/aspeed-sdram-edac.txt new file mode 100644 index 0000000000..6a0f3d90d6 --- /dev/null +++ b/dts/Bindings/edac/aspeed-sdram-edac.txt @@ -0,0 +1,25 @@ +Aspeed AST2500 SoC EDAC node + +The Aspeed AST2500 SoC supports DDR3 and DDR4 memory with and without ECC (error +correction check). + +The memory controller supports SECDED (single bit error correction, double bit +error detection) and single bit error auto scrubbing by reserving 8 bits for +every 64 bit word (effectively reducing available memory to 8/9). + +Note, the bootloader must configure ECC mode in the memory controller. + + +Required properties: +- compatible: should be "aspeed,ast2500-sdram-edac" +- reg: sdram controller register set should be <0x1e6e0000 0x174> +- interrupts: should be AVIC interrupt #0 + + +Example: + + edac: sdram@1e6e0000 { + compatible = "aspeed,ast2500-sdram-edac"; + reg = <0x1e6e0000 0x174>; + interrupts = <0>; + }; diff --git a/dts/Bindings/eeprom/at24.txt b/dts/Bindings/eeprom/at24.txt index f9a7c98427..0e456bbc12 100644 --- a/dts/Bindings/eeprom/at24.txt +++ b/dts/Bindings/eeprom/at24.txt @@ -75,6 +75,8 @@ Optional properties: - address-width: number of address bits (one of 8, 16). + - num-addresses: total number of i2c slave addresses this device takes + Example: eeprom@52 { @@ -82,4 +84,5 @@ eeprom@52 { reg = <0x52>; pagesize = <32>; wp-gpios = <&gpio1 3 0>; + num-addresses = <8>; }; diff --git a/dts/Bindings/extcon/extcon-ptn5150.txt b/dts/Bindings/extcon/extcon-ptn5150.txt new file mode 100644 index 0000000000..936fbdf128 --- /dev/null +++ b/dts/Bindings/extcon/extcon-ptn5150.txt @@ -0,0 +1,27 @@ +* PTN5150 CC (Configuration Channel) Logic device + +PTN5150 is a small thin low power CC logic chip supporting the USB Type-C +connector application with CC control logic detection and indication functions. +It is interfaced to the host controller using an I2C interface. + +Required properties: +- compatible: should be "nxp,ptn5150" +- reg: specifies the I2C slave address of the device +- int-gpio: should contain a phandle and GPIO specifier for the GPIO pin + connected to the PTN5150's INTB pin. +- vbus-gpio: should contain a phandle and GPIO specifier for the GPIO pin which + is used to control VBUS. +- pinctrl-names : a pinctrl state named "default" must be defined. +- pinctrl-0 : phandle referencing pin configuration of interrupt and vbus + control. + +Example: + ptn5150@1d { + compatible = "nxp,ptn5150"; + reg = <0x1d>; + int-gpio = <&msmgpio 78 GPIO_ACTIVE_HIGH>; + vbus-gpio = <&msmgpio 148 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&ptn5150_default>; + status = "okay"; + }; diff --git a/dts/Bindings/firmware/nvidia,tegra186-bpmp.txt b/dts/Bindings/firmware/nvidia,tegra186-bpmp.txt index 0c10802c83..ff380dadb5 100644 --- a/dts/Bindings/firmware/nvidia,tegra186-bpmp.txt +++ b/dts/Bindings/firmware/nvidia,tegra186-bpmp.txt @@ -8,7 +8,6 @@ which can create the interprocessor communication (IPC) between the CPU and BPMP. Required properties: -- name : Should be bpmp - compatible Array of strings One of: diff --git a/dts/Bindings/firmware/nvidia,tegra210-bpmp.txt b/dts/Bindings/firmware/nvidia,tegra210-bpmp.txt new file mode 100644 index 0000000000..68d814e8c0 --- /dev/null +++ b/dts/Bindings/firmware/nvidia,tegra210-bpmp.txt @@ -0,0 +1,35 @@ +NVIDIA Tegra210 Boot and Power Management Processor (BPMP) + +The Boot and Power Management Processor (BPMP) is a co-processor found +in Tegra210 SoC. It is designed to handle the early stages of the boot +process as well as to assisting in entering deep low power state +(suspend to ram), and also offloading DRAM memory clock scaling on +some platforms. The binding document defines the resources that would +be used by the BPMP T210 firmware driver, which can create the +interprocessor communication (IPC) between the CPU and BPMP. + +Required properties: +- compatible + Array of strings + One of: + - "nvidia,tegra210-bpmp" +- reg: physical base address and length for HW synchornization primitives + 1) base address and length to Tegra 'atomics' hardware + 2) base address and length to Tegra 'semaphore' hardware +- interrupts: specifies the interrupt number for receiving messages ("rx") + and for triggering messages ("tx") + +Optional properties: +- #clock-cells : Should be 1 for platforms where DRAM clock control is + offloaded to bpmp. + +Example: + +bpmp@70016000 { + compatible = "nvidia,tegra210-bpmp"; + reg = <0x0 0x70016000 0x0 0x2000 + 0x0 0x60001000 0x0 0x1000>; + interrupts = <GIC_SPI 6 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 4 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "tx", "rx"; +}; diff --git a/dts/Bindings/gnss/gnss.txt b/dts/Bindings/gnss/gnss.txt index f1e4a2ff47..f547bd4549 100644 --- a/dts/Bindings/gnss/gnss.txt +++ b/dts/Bindings/gnss/gnss.txt @@ -17,6 +17,7 @@ Required properties: represents Optional properties: +- lna-supply : Separate supply for an LNA - enable-gpios : GPIO used to enable the device - timepulse-gpios : Time pulse GPIO diff --git a/dts/Bindings/gnss/mediatek.txt b/dts/Bindings/gnss/mediatek.txt new file mode 100644 index 0000000000..80cb802813 --- /dev/null +++ b/dts/Bindings/gnss/mediatek.txt @@ -0,0 +1,35 @@ +Mediatek-based GNSS Receiver DT binding + +Mediatek chipsets are used in GNSS-receiver modules produced by several +vendors and can use a UART interface. + +Please see Documentation/devicetree/bindings/gnss/gnss.txt for generic +properties. + +Required properties: + +- compatible : Must be + + "globaltop,pa6h" + +- vcc-supply : Main voltage regulator (pin name: VCC) + +Optional properties: + +- current-speed : Default UART baud rate +- gnss-fix-gpios : GPIO used to determine device position fix state + (pin name: FIX, 3D_FIX) +- reset-gpios : GPIO used to reset the device (pin name: RESET, NRESET) +- timepulse-gpios : Time pulse GPIO (pin name: PPS1, 1PPS) +- vbackup-supply : Backup voltage regulator (pin name: VBAT, VBACKUP) + +Example: + +serial@1234 { + compatible = "ns16550a"; + + gnss { + compatible = "globaltop,pa6h"; + vcc-supply = <&vcc_3v3>; + }; +}; diff --git a/dts/Bindings/gnss/sirfstar.txt b/dts/Bindings/gnss/sirfstar.txt index 648d183cdb..f4252b6b66 100644 --- a/dts/Bindings/gnss/sirfstar.txt +++ b/dts/Bindings/gnss/sirfstar.txt @@ -12,6 +12,7 @@ Required properties: "fastrax,uc430" "linx,r4" + "wi2wi,w2sg0004" "wi2wi,w2sg0008i" "wi2wi,w2sg0084i" diff --git a/dts/Bindings/gpio/gateworks,pld-gpio.txt b/dts/Bindings/gpio/gateworks,pld-gpio.txt new file mode 100644 index 0000000000..6e81f8b755 --- /dev/null +++ b/dts/Bindings/gpio/gateworks,pld-gpio.txt @@ -0,0 +1,20 @@ +Gateworks PLD GPIO controller bindings + +The GPIO controller should be a child node on an I2C bus, +see: i2c/i2c.txt for details. + +Required properties: +- compatible: Should be "gateworks,pld-gpio" +- reg: I2C slave address +- gpio-controller: Marks the device node as a GPIO controller. +- #gpio-cells: Should be <2>. The first cell is the gpio number and + the second cell is used to specify optional parameters. + +Example: + +pld@56 { + compatible = "gateworks,pld-gpio"; + reg = <0x56>; + gpio-controller; + #gpio-cells = <2>; +}; diff --git a/dts/Bindings/gpio/gpio-eic-sprd.txt b/dts/Bindings/gpio/gpio-eic-sprd.txt index 93d98d09d9..54040a2bfe 100644 --- a/dts/Bindings/gpio/gpio-eic-sprd.txt +++ b/dts/Bindings/gpio/gpio-eic-sprd.txt @@ -33,7 +33,7 @@ Required properties: "sprd,sc9860-eic-latch", "sprd,sc9860-eic-async", "sprd,sc9860-eic-sync", - "sprd,sc27xx-eic". + "sprd,sc2731-eic". - reg: Define the base and range of the I/O address space containing the GPIO controller registers. - gpio-controller: Marks the device node as a GPIO controller. @@ -86,7 +86,7 @@ Example: }; pmic_eic: gpio@300 { - compatible = "sprd,sc27xx-eic"; + compatible = "sprd,sc2731-eic"; reg = <0x300>; interrupt-parent = <&sc2731_pmic>; interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; diff --git a/dts/Bindings/gpio/gpio-pca953x.txt b/dts/Bindings/gpio/gpio-pca953x.txt index 4e3c550e31..fb144e2b65 100644 --- a/dts/Bindings/gpio/gpio-pca953x.txt +++ b/dts/Bindings/gpio/gpio-pca953x.txt @@ -16,6 +16,7 @@ Required properties: nxp,pca9574 nxp,pca9575 nxp,pca9698 + nxp,pcal6416 nxp,pcal6524 nxp,pcal9555a maxim,max7310 diff --git a/dts/Bindings/gpio/gpio.txt b/dts/Bindings/gpio/gpio.txt index f0ba154b57..a8895d339b 100644 --- a/dts/Bindings/gpio/gpio.txt +++ b/dts/Bindings/gpio/gpio.txt @@ -67,6 +67,18 @@ Optional standard bitfield specifiers for the last cell: https://en.wikipedia.org/wiki/Open_collector - Bit 3: 0 means the output should be maintained during sleep/low-power mode 1 means the output state can be lost during sleep/low-power mode +- Bit 4: 0 means no pull-up resistor should be enabled + 1 means a pull-up resistor should be enabled + This setting only applies to hardware with a simple on/off + control for pull-up configuration. If the hardware has more + elaborate pull-up configuration, it should be represented + using a pin control binding. +- Bit 5: 0 means no pull-down resistor should be enabled + 1 means a pull-down resistor should be enabled + This setting only applies to hardware with a simple on/off + control for pull-down configuration. If the hardware has more + elaborate pull-down configuration, it should be represented + using a pin control binding. 1.1) GPIO specifier best practices ---------------------------------- diff --git a/dts/Bindings/gpio/intel,ixp4xx-gpio.txt b/dts/Bindings/gpio/intel,ixp4xx-gpio.txt new file mode 100644 index 0000000000..8dc41ed996 --- /dev/null +++ b/dts/Bindings/gpio/intel,ixp4xx-gpio.txt @@ -0,0 +1,38 @@ +Intel IXP4xx XScale Networking Processors GPIO + +This GPIO controller is found in the Intel IXP4xx processors. +It supports 16 GPIO lines. + +The interrupt portions of the GPIO controller is hierarchical: +the synchronous edge detector is part of the GPIO block, but the +actual enabling/disabling of the interrupt line is done in the +main IXP4xx interrupt controller which has a 1:1 mapping for +the first 12 GPIO lines to 12 system interrupts. + +The remaining 4 GPIO lines can not be used for receiving +interrupts. + +The interrupt parent of this GPIO controller must be the +IXP4xx interrupt controller. + +Required properties: + +- compatible : Should be + "intel,ixp4xx-gpio" +- reg : Should contain registers location and length +- gpio-controller : marks this as a GPIO controller +- #gpio-cells : Should be 2, see gpio/gpio.txt +- interrupt-controller : marks this as an interrupt controller +- #interrupt-cells : a standard two-cell interrupt, see + interrupt-controller/interrupts.txt + +Example: + +gpio0: gpio@c8004000 { + compatible = "intel,ixp4xx-gpio"; + reg = <0xc8004000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; +}; diff --git a/dts/Bindings/gpu/arm,mali-utgard.txt b/dts/Bindings/gpu/arm,mali-utgard.txt index 3f128e4f95..ae63f09fda 100644 --- a/dts/Bindings/gpu/arm,mali-utgard.txt +++ b/dts/Bindings/gpu/arm,mali-utgard.txt @@ -13,6 +13,8 @@ Required properties: + allwinner,sun8i-h3-mali + allwinner,sun50i-a64-mali + allwinner,sun50i-h5-mali + + amlogic,meson8-mali + + amlogic,meson8b-mali + amlogic,meson-gxbb-mali + amlogic,meson-gxl-mali + rockchip,rk3036-mali @@ -82,6 +84,10 @@ to specify one more vendor-specific compatible, among: Required properties: * resets: phandle to the reset line for the GPU + - amlogic,meson8-mali and amlogic,meson8b-mali + Required properties: + * resets: phandle to the reset line for the GPU + - Rockchip variants: Required properties: * resets: phandle to the reset line for the GPU diff --git a/dts/Bindings/gpu/samsung-rotator.txt b/dts/Bindings/gpu/samsung-rotator.txt index 82cd1ed0be..3aca2578da 100644 --- a/dts/Bindings/gpu/samsung-rotator.txt +++ b/dts/Bindings/gpu/samsung-rotator.txt @@ -2,9 +2,10 @@ Required properties: - compatible : value should be one of the following: - (a) "samsung,exynos4210-rotator" for Rotator IP in Exynos4210 - (b) "samsung,exynos4212-rotator" for Rotator IP in Exynos4212/4412 - (c) "samsung,exynos5250-rotator" for Rotator IP in Exynos5250 + * "samsung,s5pv210-rotator" for Rotator IP in S5PV210 + * "samsung,exynos4210-rotator" for Rotator IP in Exynos4210 + * "samsung,exynos4212-rotator" for Rotator IP in Exynos4212/4412 + * "samsung,exynos5250-rotator" for Rotator IP in Exynos5250 - reg : Physical base address of the IP registers and length of memory mapped region. diff --git a/dts/Bindings/hwmon/ad741x.txt b/dts/Bindings/hwmon/ad741x.txt new file mode 100644 index 0000000000..9102152c84 --- /dev/null +++ b/dts/Bindings/hwmon/ad741x.txt @@ -0,0 +1,15 @@ +* AD7416/AD7417/AD7418 Temperature Sensor Device Tree Bindings + +Required properties: +- compatible: one of + "adi,ad7416" + "adi,ad7417" + "adi,ad7418" +- reg: I2C address + +Example: + +hwmon@28 { + compatible = "adi,ad7418"; + reg = <0x28>; +}; diff --git a/dts/Bindings/hwmon/dps650ab.txt b/dts/Bindings/hwmon/dps650ab.txt new file mode 100644 index 0000000000..76780e7958 --- /dev/null +++ b/dts/Bindings/hwmon/dps650ab.txt @@ -0,0 +1,11 @@ +Bindings for Delta Electronics DPS-650-AB power supply + +Required properties: +- compatible : "delta,dps650ab" +- reg : I2C address, one of 0x58, 0x59. + +Example: + dps650ab@58 { + compatible = "delta,dps650ab"; + reg = <0x58>; + }; diff --git a/dts/Bindings/hwmon/hih6130.txt b/dts/Bindings/hwmon/hih6130.txt new file mode 100644 index 0000000000..2c43837af4 --- /dev/null +++ b/dts/Bindings/hwmon/hih6130.txt @@ -0,0 +1,12 @@ +Honeywell Humidicon HIH-6130 humidity/temperature sensor +-------------------------------------------------------- + +Requires node properties: +- compatible : "honeywell,hi6130" +- reg : the I2C address of the device. This is 0x27. + +Example: + hih6130@27 { + compatible = "honeywell,hih6130"; + reg = <0x27>; + }; diff --git a/dts/Bindings/hwmon/ina3221.txt b/dts/Bindings/hwmon/ina3221.txt index a7b25caa2b..fa63b61714 100644 --- a/dts/Bindings/hwmon/ina3221.txt +++ b/dts/Bindings/hwmon/ina3221.txt @@ -6,6 +6,16 @@ Texas Instruments INA3221 Device Tree Bindings - reg: I2C address Optional properties: + - ti,single-shot: This chip has two power modes: single-shot (chip takes one + measurement and then shuts itself down) and continuous ( + chip takes continuous measurements). The continuous mode is + more reliable and suitable for hardware monitor type device, + but the single-shot mode is more power-friendly and useful + for battery-powered device which cares power consumptions + while still needs some measurements occasionally. + If this property is present, the single-shot mode will be + used, instead of the default continuous one for monitoring. + = The node contains optional child nodes for three channels = = Each child node describes the information of input source = diff --git a/dts/Bindings/hwmon/lm75.txt b/dts/Bindings/hwmon/lm75.txt new file mode 100644 index 0000000000..12d8cf7cf5 --- /dev/null +++ b/dts/Bindings/hwmon/lm75.txt @@ -0,0 +1,37 @@ +*LM75 hwmon sensor. + +Required properties: +- compatible: manufacturer and chip name, one of + "adi,adt75", + "dallas,ds1775", + "dallas,ds75", + "dallas,ds7505", + "gmt,g751", + "national,lm75", + "national,lm75a", + "national,lm75b", + "maxim,max6625", + "maxim,max6626", + "maxim,max31725", + "maxim,max31726", + "maxim,mcp980x", + "st,stds75", + "st,stlm75", + "microchip,tcn75", + "ti,tmp100", + "ti,tmp101", + "ti,tmp105", + "ti,tmp112", + "ti,tmp175", + "ti,tmp275", + "ti,tmp75", + "ti,tmp75c", + +- reg: I2C bus address of the device + +Example: + +sensor@48 { + compatible = "st,stlm75"; + reg = <0x48>; +}; diff --git a/dts/Bindings/hwmon/pwm-fan.txt b/dts/Bindings/hwmon/pwm-fan.txt index c6d533202d..49ca5d83ed 100644 --- a/dts/Bindings/hwmon/pwm-fan.txt +++ b/dts/Bindings/hwmon/pwm-fan.txt @@ -6,6 +6,9 @@ Required properties: - cooling-levels : PWM duty cycle values in a range from 0 to 255 which correspond to thermal cooling states +Optional properties: +- fan-supply : phandle to the regulator that provides power to the fan + Example: fan0: pwm-fan { compatible = "pwm-fan"; diff --git a/dts/Bindings/i2c/i2c-iop3xx.txt b/dts/Bindings/i2c/i2c-iop3xx.txt new file mode 100644 index 0000000000..dcc8390e0d --- /dev/null +++ b/dts/Bindings/i2c/i2c-iop3xx.txt @@ -0,0 +1,20 @@ +i2c Controller on XScale platforms such as IOP3xx and IXP4xx + +Required properties: +- compatible : Must be one of + "intel,iop3xx-i2c" + "intel,ixp4xx-i2c"; +- reg +- #address-cells = <1>; +- #size-cells = <0>; + +Optional properties: +- Child nodes conforming to i2c bus binding + +Example: + +i2c@c8011000 { + compatible = "intel,ixp4xx-i2c"; + reg = <0xc8011000 0x18>; + interrupts = <33 IRQ_TYPE_LEVEL_LOW>; +}; diff --git a/dts/Bindings/i2c/i2c-mtk.txt b/dts/Bindings/i2c/i2c-mt65xx.txt index e199695b1c..ee4c324541 100644 --- a/dts/Bindings/i2c/i2c-mtk.txt +++ b/dts/Bindings/i2c/i2c-mt65xx.txt @@ -10,6 +10,7 @@ Required properties: "mediatek,mt6589-i2c": for MediaTek MT6589 "mediatek,mt7622-i2c": for MediaTek MT7622 "mediatek,mt7623-i2c", "mediatek,mt6577-i2c": for MediaTek MT7623 + "mediatek,mt7629-i2c", "mediatek,mt2712-i2c": for MediaTek MT7629 "mediatek,mt8173-i2c": for MediaTek MT8173 - reg: physical base address of the controller and dma base, length of memory mapped region. diff --git a/dts/Bindings/i2c/i2c-st-ddci2c.txt b/dts/Bindings/i2c/i2c-stu300.txt index bd81a48263..bd81a48263 100644 --- a/dts/Bindings/i2c/i2c-st-ddci2c.txt +++ b/dts/Bindings/i2c/i2c-stu300.txt diff --git a/dts/Bindings/i2c/i2c-sunxi-p2wi.txt b/dts/Bindings/i2c/i2c-sun6i-p2wi.txt index 49df005334..49df005334 100644 --- a/dts/Bindings/i2c/i2c-sunxi-p2wi.txt +++ b/dts/Bindings/i2c/i2c-sun6i-p2wi.txt diff --git a/dts/Bindings/i2c/i2c-vt8500.txt b/dts/Bindings/i2c/i2c-wmt.txt index 94a425eaa6..94a425eaa6 100644 --- a/dts/Bindings/i2c/i2c-vt8500.txt +++ b/dts/Bindings/i2c/i2c-wmt.txt diff --git a/dts/Bindings/iio/accel/mma8452.txt b/dts/Bindings/iio/accel/mma8452.txt index 2100e9af37..e132394375 100644 --- a/dts/Bindings/iio/accel/mma8452.txt +++ b/dts/Bindings/iio/accel/mma8452.txt @@ -20,6 +20,10 @@ Optional properties: - interrupt-names: should contain "INT1" and/or "INT2", the accelerometer's interrupt line in use. + - vdd-supply: phandle to the regulator that provides vdd power to the accelerometer. + + - vddio-supply: phandle to the regulator that provides vddio power to the accelerometer. + Example: mma8453fc@1d { diff --git a/dts/Bindings/iio/adc/adi,ad7606.txt b/dts/Bindings/iio/adc/adi,ad7606.txt new file mode 100644 index 0000000000..d7b6241ca8 --- /dev/null +++ b/dts/Bindings/iio/adc/adi,ad7606.txt @@ -0,0 +1,65 @@ +Analog Devices AD7606 Simultaneous Sampling ADC + +Required properties for the AD7606: + +- compatible: Must be one of + * "adi,ad7605-4" + * "adi,ad7606-8" + * "adi,ad7606-6" + * "adi,ad7606-4" +- reg: SPI chip select number for the device +- spi-max-frequency: Max SPI frequency to use + see: Documentation/devicetree/bindings/spi/spi-bus.txt +- spi-cpha: See Documentation/devicetree/bindings/spi/spi-bus.txt +- avcc-supply: phandle to the Avcc power supply +- interrupts: IRQ line for the ADC + see: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt +- adi,conversion-start-gpios: must be the device tree identifier of the CONVST pin. + This logic input is used to initiate conversions on the analog + input channels. As the line is active high, it should be marked + GPIO_ACTIVE_HIGH. + +Optional properties: + +- reset-gpios: must be the device tree identifier of the RESET pin. If specified, + it will be asserted during driver probe. As the line is active high, + it should be marked GPIO_ACTIVE_HIGH. +- standby-gpios: must be the device tree identifier of the STBY pin. This pin is used + to place the AD7606 into one of two power-down modes, Standby mode or + Shutdown mode. As the line is active low, it should be marked + GPIO_ACTIVE_LOW. +- adi,first-data-gpios: must be the device tree identifier of the FRSTDATA pin. + The FRSTDATA output indicates when the first channel, V1, is + being read back on either the parallel, byte or serial interface. + As the line is active high, it should be marked GPIO_ACTIVE_HIGH. +- adi,range-gpios: must be the device tree identifier of the RANGE pin. The polarity on + this pin determines the input range of the analog input channels. If + this pin is tied to a logic high, the analog input range is ±10V for + all channels. If this pin is tied to a logic low, the analog input range + is ±5V for all channels. As the line is active high, it should be marked + GPIO_ACTIVE_HIGH. +- adi,oversampling-ratio-gpios: must be the device tree identifier of the over-sampling + mode pins. As the line is active high, it should be marked + GPIO_ACTIVE_HIGH. + +Example: + + adc@0 { + compatible = "adi,ad7606-8"; + reg = <0>; + spi-max-frequency = <1000000>; + spi-cpol; + + avcc-supply = <&adc_vref>; + + interrupts = <25 IRQ_TYPE_EDGE_FALLING>; + interrupt-parent = <&gpio>; + + adi,conversion-start-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio 27 GPIO_ACTIVE_HIGH>; + adi,first-data-gpios = <&gpio 22 GPIO_ACTIVE_HIGH>; + adi,oversampling-ratio-gpios = <&gpio 18 GPIO_ACTIVE_HIGH + &gpio 23 GPIO_ACTIVE_HIGH + &gpio 26 GPIO_ACTIVE_HIGH>; + standby-gpios = <&gpio 24 GPIO_ACTIVE_LOW>; + }; diff --git a/dts/Bindings/iio/adc/adi,ad7768-1.txt b/dts/Bindings/iio/adc/adi,ad7768-1.txt new file mode 100644 index 0000000000..9f5b88cf68 --- /dev/null +++ b/dts/Bindings/iio/adc/adi,ad7768-1.txt @@ -0,0 +1,41 @@ +Analog Devices AD7768-1 ADC device driver + +Required properties for the AD7768-1: + +- compatible: Must be "adi,ad7768-1" +- reg: SPI chip select number for the device +- spi-max-frequency: Max SPI frequency to use + see: Documentation/devicetree/bindings/spi/spi-bus.txt +- clocks: phandle to the master clock (mclk) + see: Documentation/devicetree/bindings/clock/clock-bindings.txt +- clock-names: Must be "mclk". +- interrupts: IRQ line for the ADC + see: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt +- vref-supply: vref supply can be used as reference for conversion +- adi,sync-in-gpios: must be the device tree identifier of the SYNC-IN pin. Enables + synchronization of multiple devices that require simultaneous sampling. + A pulse is always required if the configuration is changed in any way, for example + if the filter decimation rate changes. As the line is active low, it should + be marked GPIO_ACTIVE_LOW. + +Optional properties: + + - reset-gpios : GPIO spec for the RESET pin. If specified, it will be asserted during + driver probe. As the line is active low, it should be marked GPIO_ACTIVE_LOW. + +Example: + + adc@0 { + compatible = "adi,ad7768-1"; + reg = <0>; + spi-max-frequency = <2000000>; + spi-cpol; + spi-cpha; + vref-supply = <&adc_vref>; + interrupts = <25 IRQ_TYPE_EDGE_RISING>; + interrupt-parent = <&gpio>; + adi,sync-in-gpios = <&gpio 22 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio 27 GPIO_ACTIVE_LOW>; + clocks = <&ad7768_mclk>; + clock-names = "mclk"; + }; diff --git a/dts/Bindings/iio/adc/amlogic,meson-saradc.txt b/dts/Bindings/iio/adc/amlogic,meson-saradc.txt index 325090e43c..75c7759541 100644 --- a/dts/Bindings/iio/adc/amlogic,meson-saradc.txt +++ b/dts/Bindings/iio/adc/amlogic,meson-saradc.txt @@ -23,6 +23,10 @@ Required properties: - #io-channel-cells: must be 1, see ../iio-bindings.txt Optional properties: +- amlogic,hhi-sysctrl: phandle to the syscon which contains the 5th bit + of the TSC (temperature sensor coefficient) on + Meson8b and Meson8m2 (which used to calibrate the + temperature sensor) - nvmem-cells: phandle to the temperature_calib eFuse cells - nvmem-cell-names: if present (to enable the temperature sensor calibration) this must contain "temperature_calib" diff --git a/dts/Bindings/iio/adc/ingenic,adc.txt b/dts/Bindings/iio/adc/ingenic,adc.txt new file mode 100644 index 0000000000..f01159f20d --- /dev/null +++ b/dts/Bindings/iio/adc/ingenic,adc.txt @@ -0,0 +1,48 @@ +* Ingenic JZ47xx ADC controller IIO bindings + +Required properties: + +- compatible: Should be one of: + * ingenic,jz4725b-adc + * ingenic,jz4740-adc +- reg: ADC controller registers location and length. +- clocks: phandle to the SoC's ADC clock. +- clock-names: Must be set to "adc". +- #io-channel-cells: Must be set to <1> to indicate channels are selected + by index. + +ADC clients must use the format described in iio-bindings.txt, giving +a phandle and IIO specifier pair ("io-channels") to the ADC controller. + +Example: + +#include <dt-bindings/iio/adc/ingenic,adc.h> + +adc: adc@10070000 { + compatible = "ingenic,jz4740-adc"; + #io-channel-cells = <1>; + + reg = <0x10070000 0x30>; + + clocks = <&cgu JZ4740_CLK_ADC>; + clock-names = "adc"; + + interrupt-parent = <&intc>; + interrupts = <18>; +}; + +adc-keys { + ... + compatible = "adc-keys"; + io-channels = <&adc INGENIC_ADC_AUX>; + io-channel-names = "buttons"; + ... +}; + +battery { + ... + compatible = "ingenic,jz4740-battery"; + io-channels = <&adc INGENIC_ADC_BATTERY>; + io-channel-names = "battery"; + ... +}; diff --git a/dts/Bindings/staging/iio/adc/lpc32xx-adc.txt b/dts/Bindings/iio/adc/lpc32xx-adc.txt index b3629d3a9a..b3629d3a9a 100644 --- a/dts/Bindings/staging/iio/adc/lpc32xx-adc.txt +++ b/dts/Bindings/iio/adc/lpc32xx-adc.txt diff --git a/dts/Bindings/iio/adc/nuvoton,npcm-adc.txt b/dts/Bindings/iio/adc/nuvoton,npcm-adc.txt new file mode 100644 index 0000000000..eb939fe778 --- /dev/null +++ b/dts/Bindings/iio/adc/nuvoton,npcm-adc.txt @@ -0,0 +1,24 @@ +Nuvoton NPCM Analog to Digital Converter (ADC) + +The NPCM ADC is a 10-bit converter for eight channel inputs. + +Required properties: +- compatible: "nuvoton,npcm750-adc" for the NPCM7XX BMC. +- reg: specifies physical base address and size of the registers. +- interrupts: Contain the ADC interrupt with flags for falling edge. + +Optional properties: +- clocks: phandle of ADC reference clock, in case the clock is not + added the ADC will use the default ADC sample rate. +- vref-supply: The regulator supply ADC reference voltage, in case the + vref-supply is not added the ADC will use internal voltage + reference. + +Example: + +adc: adc@f000c000 { + compatible = "nuvoton,npcm750-adc"; + reg = <0xf000c000 0x8>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk NPCM7XX_CLK_ADC>; +}; diff --git a/dts/Bindings/iio/adc/samsung,exynos-adc.txt b/dts/Bindings/iio/adc/samsung,exynos-adc.txt index a10c1f8903..e1fe02f3e3 100644 --- a/dts/Bindings/iio/adc/samsung,exynos-adc.txt +++ b/dts/Bindings/iio/adc/samsung,exynos-adc.txt @@ -11,11 +11,13 @@ New driver handles the following Required properties: - compatible: Must be "samsung,exynos-adc-v1" - for exynos4412/5250 controllers. + for Exynos5250 controllers. Must be "samsung,exynos-adc-v2" for future controllers. Must be "samsung,exynos3250-adc" for controllers compatible with ADC of Exynos3250. + Must be "samsung,exynos4212-adc" for + controllers compatible with ADC of Exynos4212 and Exynos4412. Must be "samsung,exynos7-adc" for the ADC in Exynos7 and compatibles Must be "samsung,s3c2410-adc" for diff --git a/dts/Bindings/iio/adc/stmpe-adc.txt b/dts/Bindings/iio/adc/stmpe-adc.txt new file mode 100644 index 0000000000..480e664226 --- /dev/null +++ b/dts/Bindings/iio/adc/stmpe-adc.txt @@ -0,0 +1,21 @@ +STMPE ADC driver +---------------- + +Required properties: + - compatible: "st,stmpe-adc" + +Optional properties: +Note that the ADC is shared with the STMPE touchscreen. ADC related settings +have to be done in the mfd. +- st,norequest-mask: bitmask specifying which ADC channels should _not_ be + requestable due to different usage (e.g. touch) + +Node name must be stmpe_adc and should be child node of stmpe node to +which it belongs. + +Example: + + stmpe_adc { + compatible = "st,stmpe-adc"; + st,norequest-mask = <0x0F>; /* dont use ADC CH3-0 */ + }; diff --git a/dts/Bindings/iio/adc/ti-ads124s08.txt b/dts/Bindings/iio/adc/ti-ads124s08.txt new file mode 100644 index 0000000000..ecf807bb32 --- /dev/null +++ b/dts/Bindings/iio/adc/ti-ads124s08.txt @@ -0,0 +1,25 @@ +* Texas Instruments' ads124s08 and ads124s06 ADC chip + +Required properties: + - compatible : + "ti,ads124s08" + "ti,ads124s06" + - reg : spi chip select number for the device + +Recommended properties: + - spi-max-frequency : Definition as per + Documentation/devicetree/bindings/spi/spi-bus.txt + - spi-cpha : Definition as per + Documentation/devicetree/bindings/spi/spi-bus.txt + +Optional properties: + - reset-gpios : GPIO pin used to reset the device. + +Example: +adc@0 { + compatible = "ti,ads124s08"; + reg = <0>; + spi-max-frequency = <1000000>; + spi-cpha; + reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; +}; diff --git a/dts/Bindings/iio/chemical/bme680.txt b/dts/Bindings/iio/chemical/bme680.txt new file mode 100644 index 0000000000..7f3827cfb2 --- /dev/null +++ b/dts/Bindings/iio/chemical/bme680.txt @@ -0,0 +1,11 @@ +Bosch Sensortec BME680 pressure/temperature/humidity/voc sensors + +Required properties: +- compatible: must be "bosch,bme680" + +Example: + +bme680@76 { + compatible = "bosch,bme680"; + reg = <0x76>; +}; diff --git a/dts/Bindings/iio/chemical/plantower,pms7003.txt b/dts/Bindings/iio/chemical/plantower,pms7003.txt new file mode 100644 index 0000000000..7b5f06f324 --- /dev/null +++ b/dts/Bindings/iio/chemical/plantower,pms7003.txt @@ -0,0 +1,20 @@ +* Plantower PMS7003 particulate matter sensor + +Required properties: +- compatible: must be "plantower,pms7003" +- vcc-supply: phandle to the regulator that provides power to the sensor + +Optional properties: +- plantower,set-gpios: phandle to the GPIO connected to the SET line +- reset-gpios: phandle to the GPIO connected to the RESET line + +Refer to serial/slave-device.txt for generic serial attached device bindings. + +Example: + +&uart0 { + air-pollution-sensor { + compatible = "plantower,pms7003"; + vcc-supply = <®_vcc5v0>; + }; +}; diff --git a/dts/Bindings/iio/chemical/sensirion,sgp30.txt b/dts/Bindings/iio/chemical/sensirion,sgp30.txt new file mode 100644 index 0000000000..5844ed5817 --- /dev/null +++ b/dts/Bindings/iio/chemical/sensirion,sgp30.txt @@ -0,0 +1,15 @@ +* Sensirion SGP30/SGPC3 multi-pixel Gas Sensor + +Required properties: + + - compatible: must be one of + "sensirion,sgp30" + "sensirion,sgpc3" + - reg: the I2C address of the sensor + +Example: + +gas@58 { + compatible = "sensirion,sgp30"; + reg = <0x58>; +}; diff --git a/dts/Bindings/iio/chemical/sensirion,sps30.txt b/dts/Bindings/iio/chemical/sensirion,sps30.txt new file mode 100644 index 0000000000..6eee2709b5 --- /dev/null +++ b/dts/Bindings/iio/chemical/sensirion,sps30.txt @@ -0,0 +1,12 @@ +* Sensirion SPS30 particulate matter sensor + +Required properties: +- compatible: must be "sensirion,sps30" +- reg: the I2C address of the sensor + +Example: + +sps30@69 { + compatible = "sensirion,sps30"; + reg = <0x69>; +}; diff --git a/dts/Bindings/iio/dac/ti,dac7612.txt b/dts/Bindings/iio/dac/ti,dac7612.txt new file mode 100644 index 0000000000..639c94ed83 --- /dev/null +++ b/dts/Bindings/iio/dac/ti,dac7612.txt @@ -0,0 +1,28 @@ +* Texas Instruments Dual, 12-Bit Serial Input Digital-to-Analog Converter + +The DAC7612 is a dual, 12-bit digital-to-analog converter (DAC) with guaranteed +12-bit monotonicity performance over the industrial temperature range. +Is is programmable through an SPI interface. + +The internal DACs are loaded when the LOADDACS pin is pulled down. + +http://www.ti.com/lit/ds/sbas106/sbas106.pdf + +Required Properties: +- compatible: Should be one of: + "ti,dac7612" + "ti,dac7612u" + "ti,dac7612ub" +- reg: Definition as per Documentation/devicetree/bindings/spi/spi-bus.txt + +Optional Properties: +- ti,loaddacs-gpios: GPIO descriptor for the LOADDACS pin. +- spi-*: Definition as per Documentation/devicetree/bindings/spi/spi-bus.txt + +Example: + + dac@1 { + compatible = "ti,dac7612"; + reg = <0x1>; + ti,loaddacs-gpios = <&msmgpio 25 GPIO_ACTIVE_LOW>; + }; diff --git a/dts/Bindings/iio/impedance-analyzer/ad5933.txt b/dts/Bindings/iio/impedance-analyzer/ad5933.txt new file mode 100644 index 0000000000..5ff38728ff --- /dev/null +++ b/dts/Bindings/iio/impedance-analyzer/ad5933.txt @@ -0,0 +1,26 @@ +Analog Devices AD5933/AD5934 Impedance Converter, Network Analyzer + +https://www.analog.com/media/en/technical-documentation/data-sheets/AD5933.pdf +https://www.analog.com/media/en/technical-documentation/data-sheets/AD5934.pdf + +Required properties: + - compatible : should be one of + "adi,ad5933" + "adi,ad5934" + - reg : the I2C address. + - vdd-supply : The regulator supply for DVDD, AVDD1 and AVDD2 when they + are connected together. + +Optional properties: +- clocks : external clock reference. +- clock-names : must be "mclk" if clocks is set. + +Example for a I2C device node: + + impedance-analyzer@0d { + compatible = "adi,adxl345"; + reg = <0x0d>; + vdd-supply = <&vdd_supply>; + clocks = <&ref_clk>; + clock-names = "mclk"; + }; diff --git a/dts/Bindings/iio/imu/bmi160.txt b/dts/Bindings/iio/imu/bmi160.txt index 0c1c105fb5..900c169de0 100644 --- a/dts/Bindings/iio/imu/bmi160.txt +++ b/dts/Bindings/iio/imu/bmi160.txt @@ -9,9 +9,11 @@ Required properties: - spi-max-frequency : set maximum clock frequency (only for SPI) Optional properties: - - interrupts : interrupt mapping for IRQ, must be IRQ_TYPE_LEVEL_LOW + - interrupts : interrupt mapping for IRQ - interrupt-names : set to "INT1" if INT1 pin should be used as interrupt input, set to "INT2" if INT2 pin should be used instead + - drive-open-drain : set if the specified interrupt pin should be configured as + open drain. If not set, defaults to push-pull. Examples: @@ -20,7 +22,7 @@ bmi160@68 { reg = <0x68>; interrupt-parent = <&gpio4>; - interrupts = <12 IRQ_TYPE_LEVEL_LOW>; + interrupts = <12 IRQ_TYPE_EDGE_RISING>; interrupt-names = "INT1"; }; diff --git a/dts/Bindings/iio/imu/inv_mpu6050.txt b/dts/Bindings/iio/imu/inv_mpu6050.txt index 6ab9a9d196..268bf7568e 100644 --- a/dts/Bindings/iio/imu/inv_mpu6050.txt +++ b/dts/Bindings/iio/imu/inv_mpu6050.txt @@ -11,6 +11,7 @@ Required properties: "invensense,mpu9250" "invensense,mpu9255" "invensense,icm20608" + "invensense,icm20602" - reg : the I2C address of the sensor - interrupts: interrupt mapping for IRQ. It should be configured with flags IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_EDGE_RISING, IRQ_TYPE_LEVEL_LOW or diff --git a/dts/Bindings/iio/light/max44009.txt b/dts/Bindings/iio/light/max44009.txt new file mode 100644 index 0000000000..4a98848e35 --- /dev/null +++ b/dts/Bindings/iio/light/max44009.txt @@ -0,0 +1,24 @@ +* MAX44009 Ambient Light Sensor + +Required properties: + +- compatible: should be "maxim,max44009" +- reg: the I2C address of the device (default is <0x4a>) + +Optional properties: + +- interrupts: interrupt mapping for GPIO IRQ. Should be configured with + IRQ_TYPE_EDGE_FALLING. + +Refer to interrupt-controller/interrupts.txt for generic interrupt client +node bindings. + +Example: + +light-sensor@4a { + compatible = "maxim,max44009"; + reg = <0x4a>; + + interrupt-parent = <&gpio1>; + interrupts = <17 IRQ_TYPE_EDGE_FALLING>; +}; diff --git a/dts/Bindings/iio/st-sensors.txt b/dts/Bindings/iio/st-sensors.txt index ddcb955095..52ee4baec6 100644 --- a/dts/Bindings/iio/st-sensors.txt +++ b/dts/Bindings/iio/st-sensors.txt @@ -77,3 +77,4 @@ Pressure sensors: - st,lps22hb-press - st,lps33hw - st,lps35hw +- st,lps22hh diff --git a/dts/Bindings/input/cypress,tm2-touchkey.txt b/dts/Bindings/input/cypress,tm2-touchkey.txt index 0c252d9306..ef2ae72971 100644 --- a/dts/Bindings/input/cypress,tm2-touchkey.txt +++ b/dts/Bindings/input/cypress,tm2-touchkey.txt @@ -1,13 +1,19 @@ Samsung tm2-touchkey Required properties: -- compatible: must be "cypress,tm2-touchkey" +- compatible: + * "cypress,tm2-touchkey" - for the touchkey found on the tm2 board + * "cypress,midas-touchkey" - for the touchkey found on midas boards + * "cypress,aries-touchkey" - for the touchkey found on aries boards - reg: I2C address of the chip. - interrupts: interrupt to which the chip is connected (see interrupt binding[0]). - vcc-supply : internal regulator output. 1.8V - vdd-supply : power supply for IC 3.3V +Optional properties: +- linux,keycodes: array of keycodes (max 4), default KEY_PHONE and KEY_BACK + [0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt Example: @@ -21,5 +27,6 @@ Example: interrupts = <2 IRQ_TYPE_EDGE_FALLING>; vcc-supply=<&ldo32_reg>; vdd-supply=<&ldo33_reg>; + linux,keycodes = <KEY_PHONE KEY_BACK>; }; }; diff --git a/dts/Bindings/input/ilitek,ili2xxx.txt b/dts/Bindings/input/ilitek,ili2xxx.txt new file mode 100644 index 0000000000..b2a76301e6 --- /dev/null +++ b/dts/Bindings/input/ilitek,ili2xxx.txt @@ -0,0 +1,25 @@ +Ilitek ILI210x/ILI251x touchscreen controller + +Required properties: +- compatible: + ilitek,ili210x for ILI210x + ilitek,ili251x for ILI251x + +- reg: The I2C address of the device + +- interrupts: The sink for the touchscreen's IRQ output + See ../interrupt-controller/interrupts.txt + +Optional properties for main touchpad device: + +- reset-gpios: GPIO specifier for the touchscreen's reset pin (active low) + +Example: + + touchscreen@41 { + compatible = "ilitek,ili251x"; + reg = <0x41>; + interrupt-parent = <&gpio4>; + interrupts = <7 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&gpio5 21 GPIO_ACTIVE_LOW>; + }; diff --git a/dts/Bindings/input/msm-vibrator.txt b/dts/Bindings/input/msm-vibrator.txt new file mode 100644 index 0000000000..8dcf014ef2 --- /dev/null +++ b/dts/Bindings/input/msm-vibrator.txt @@ -0,0 +1,36 @@ +* Device tree bindings for the Qualcomm MSM vibrator + +Required properties: + + - compatible: Should be one of + "qcom,msm8226-vibrator" + "qcom,msm8974-vibrator" + - reg: the base address and length of the IO memory for the registers. + - pinctrl-names: set to default. + - pinctrl-0: phandles pointing to pin configuration nodes. See + Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt + - clock-names: set to pwm + - clocks: phandle of the clock. See + Documentation/devicetree/bindings/clock/clock-bindings.txt + - enable-gpios: GPIO that enables the vibrator. + +Optional properties: + + - vcc-supply: phandle to the regulator that provides power to the sensor. + +Example from a LG Nexus 5 (hammerhead) phone: + +vibrator@fd8c3450 { + reg = <0xfd8c3450 0x400>; + compatible = "qcom,msm8974-vibrator"; + + vcc-supply = <&pm8941_l19>; + + clocks = <&mmcc CAMSS_GP1_CLK>; + clock-names = "pwm"; + + enable-gpios = <&msmgpio 60 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&vibrator_pin>; +}; diff --git a/dts/Bindings/input/st,stpmic1-onkey.txt b/dts/Bindings/input/st,stpmic1-onkey.txt new file mode 100644 index 0000000000..4494613ae7 --- /dev/null +++ b/dts/Bindings/input/st,stpmic1-onkey.txt @@ -0,0 +1,28 @@ +STMicroelectronics STPMIC1 Onkey + +Required properties: + +- compatible = "st,stpmic1-onkey"; +- interrupts: interrupt line to use +- interrupt-names = "onkey-falling", "onkey-rising" + onkey-falling: happens when onkey is pressed; IT_PONKEY_F of pmic + onkey-rising: happens when onkey is released; IT_PONKEY_R of pmic + +Optional properties: + +- st,onkey-clear-cc-flag: onkey is able power on after an + over-current shutdown event. +- st,onkey-pu-inactive: onkey pull up is not active +- power-off-time-sec: Duration in seconds which the key should be kept + pressed for device to power off automatically (from 1 to 16 seconds). + see See Documentation/devicetree/bindings/input/keys.txt + +Example: + +onkey { + compatible = "st,stpmic1-onkey"; + interrupt-parent = <&pmic>; + interrupts = <IT_PONKEY_F 0>,<IT_PONKEY_R 1>; + interrupt-names = "onkey-falling", "onkey-rising"; + power-off-time-sec = <10>; +}; diff --git a/dts/Bindings/input/touchscreen/edt-ft5x06.txt b/dts/Bindings/input/touchscreen/edt-ft5x06.txt index da2dc5d6c9..870b8c5cce 100644 --- a/dts/Bindings/input/touchscreen/edt-ft5x06.txt +++ b/dts/Bindings/input/touchscreen/edt-ft5x06.txt @@ -1,11 +1,12 @@ FocalTech EDT-FT5x06 Polytouch driver ===================================== -There are 3 variants of the chip for various touch panel sizes +There are 5 variants of the chip for various touch panel sizes FT5206GE1 2.8" .. 3.8" FT5306DE4 4.3" .. 7" FT5406EE8 7" .. 8.9" FT5506EEG 7" .. 8.9" +FT5726NEI 5.7” .. 11.6" The software interface is identical for all those chips, so that currently there is no need for the driver to distinguish between the @@ -19,6 +20,7 @@ Required properties: or: "edt,edt-ft5306" or: "edt,edt-ft5406" or: "edt,edt-ft5506" + or: "evervision,ev-ft5726" or: "focaltech,ft6236" - reg: I2C slave address of the chip (0x38) @@ -42,6 +44,15 @@ Optional properties: - offset: allows setting the edge compensation in the range from 0 to 31. + + - offset-x: Same as offset, but applies only to the horizontal position. + Range from 0 to 80, only supported by evervision,ev-ft5726 + devices. + + - offset-y: Same as offset, but applies only to the vertical position. + Range from 0 to 80, only supported by evervision,ev-ft5726 + devices. + - touchscreen-size-x : See touchscreen.txt - touchscreen-size-y : See touchscreen.txt - touchscreen-fuzz-x : See touchscreen.txt diff --git a/dts/Bindings/input/touchscreen/goodix.txt b/dts/Bindings/input/touchscreen/goodix.txt index f7e95c52f3..8cf0b4d38a 100644 --- a/dts/Bindings/input/touchscreen/goodix.txt +++ b/dts/Bindings/input/touchscreen/goodix.txt @@ -3,6 +3,7 @@ Device tree bindings for Goodix GT9xx series touchscreen controller Required properties: - compatible : Should be "goodix,gt1151" + or "goodix,gt5688" or "goodix,gt911" or "goodix,gt9110" or "goodix,gt912" @@ -18,11 +19,14 @@ Optional properties: - irq-gpios : GPIO pin used for IRQ. The driver uses the interrupt gpio pin as output to reset the device. - reset-gpios : GPIO pin used for reset - - - touchscreen-inverted-x : X axis is inverted (boolean) - - touchscreen-inverted-y : Y axis is inverted (boolean) - - touchscreen-swapped-x-y : X and Y axis are swapped (boolean) - (swapping is done after inverting the axis) + - touchscreen-inverted-x + - touchscreen-inverted-y + - touchscreen-size-x + - touchscreen-size-y + - touchscreen-swapped-x-y + +The touchscreen-* properties are documented in touchscreen.txt in this +directory. Example: diff --git a/dts/Bindings/input/touchscreen/sitronix-st1232.txt b/dts/Bindings/input/touchscreen/sitronix-st1232.txt index 64ad48b824..019373253b 100644 --- a/dts/Bindings/input/touchscreen/sitronix-st1232.txt +++ b/dts/Bindings/input/touchscreen/sitronix-st1232.txt @@ -1,13 +1,17 @@ -* Sitronix st1232 touchscreen controller +* Sitronix st1232 or st1633 touchscreen controller Required properties: -- compatible: must be "sitronix,st1232" +- compatible: must contain one of + * "sitronix,st1232" + * "sitronix,st1633" - reg: I2C address of the chip - interrupts: interrupt to which the chip is connected Optional properties: - gpios: a phandle to the reset GPIO +For additional optional properties see: touchscreen.txt + Example: i2c@00000000 { diff --git a/dts/Bindings/input/touchscreen/stmpe.txt b/dts/Bindings/input/touchscreen/stmpe.txt index 127baa31a7..c549924603 100644 --- a/dts/Bindings/input/touchscreen/stmpe.txt +++ b/dts/Bindings/input/touchscreen/stmpe.txt @@ -5,39 +5,105 @@ Required properties: - compatible: "st,stmpe-ts" Optional properties: -- st,sample-time: ADC converstion time in number of clock. (0 -> 36 clocks, 1 -> - 44 clocks, 2 -> 56 clocks, 3 -> 64 clocks, 4 -> 80 clocks, 5 -> 96 clocks, 6 - -> 144 clocks), recommended is 4. -- st,mod-12b: ADC Bit mode (0 -> 10bit ADC, 1 -> 12bit ADC) -- st,ref-sel: ADC reference source (0 -> internal reference, 1 -> external - reference) -- st,adc-freq: ADC Clock speed (0 -> 1.625 MHz, 1 -> 3.25 MHz, 2 || 3 -> 6.5 MHz) -- st,ave-ctrl: Sample average control (0 -> 1 sample, 1 -> 2 samples, 2 -> 4 - samples, 3 -> 8 samples) -- st,touch-det-delay: Touch detect interrupt delay (0 -> 10 us, 1 -> 50 us, 2 -> - 100 us, 3 -> 500 us, 4-> 1 ms, 5 -> 5 ms, 6 -> 10 ms, 7 -> 50 ms) recommended - is 3 -- st,settling: Panel driver settling time (0 -> 10 us, 1 -> 100 us, 2 -> 500 us, 3 - -> 1 ms, 4 -> 5 ms, 5 -> 10 ms, 6 for 50 ms, 7 -> 100 ms) recommended is 2 -- st,fraction-z: Length of the fractional part in z (fraction-z ([0..7]) = Count of - the fractional part) recommended is 7 -- st,i-drive: current limit value of the touchscreen drivers (0 -> 20 mA typical 35 - mA max, 1 -> 50 mA typical 80 mA max) +- st,ave-ctrl : Sample average control + 0 -> 1 sample + 1 -> 2 samples + 2 -> 4 samples + 3 -> 8 samples +- st,touch-det-delay : Touch detect interrupt delay (recommended is 3) + 0 -> 10 us + 1 -> 50 us + 2 -> 100 us + 3 -> 500 us + 4 -> 1 ms + 5 -> 5 ms + 6 -> 10 ms + 7 -> 50 ms +- st,settling : Panel driver settling time (recommended is 2) + 0 -> 10 us + 1 -> 100 us + 2 -> 500 us + 3 -> 1 ms + 4 -> 5 ms + 5 -> 10 ms + 6 -> 50 ms + 7 -> 100 ms +- st,fraction-z : Length of the fractional part in z (recommended is 7) + (fraction-z ([0..7]) = Count of the fractional part) +- st,i-drive : current limit value of the touchscreen drivers + 0 -> 20 mA (typical 35mA max) + 1 -> 50 mA (typical 80 mA max) + +Optional properties common with MFD (deprecated): + - st,sample-time : ADC conversion time in number of clock. + 0 -> 36 clocks + 1 -> 44 clocks + 2 -> 56 clocks + 3 -> 64 clocks + 4 -> 80 clocks (recommended) + 5 -> 96 clocks + 6 -> 124 clocks + - st,mod-12b : ADC Bit mode + 0 -> 10bit ADC + 1 -> 12bit ADC + - st,ref-sel : ADC reference source + 0 -> internal + 1 -> external + - st,adc-freq : ADC Clock speed + 0 -> 1.625 MHz + 1 -> 3.25 MHz + 2 || 3 -> 6.5 MHz Node name must be stmpe_touchscreen and should be child node of stmpe node to which it belongs. +Note that common ADC settings of stmpe_touchscreen (child) will take precedence +over the settings done in MFD. + Example: +stmpe811@41 { + compatible = "st,stmpe811"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_touch_int>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x41>; + interrupts = <10 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&gpio4>; + interrupt-controller; + id = <0>; + blocks = <0x5>; + irq-trigger = <0x1>; + /* Common ADC settings */ + /* 3.25 MHz ADC clock speed */ + st,adc-freq = <1>; + /* 12-bit ADC */ + st,mod-12b = <1>; + /* internal ADC reference */ + st,ref-sel = <0>; + /* ADC converstion time: 80 clocks */ + st,sample-time = <4>; + stmpe_touchscreen { compatible = "st,stmpe-ts"; - st,sample-time = <4>; - st,mod-12b = <1>; - st,ref-sel = <0>; - st,adc-freq = <1>; - st,ave-ctrl = <1>; - st,touch-det-delay = <2>; - st,settling = <2>; + reg = <0>; + /* 8 sample average control */ + st,ave-ctrl = <3>; + /* 5 ms touch detect interrupt delay */ + st,touch-det-delay = <5>; + /* 1 ms panel driver settling time */ + st,settling = <3>; + /* 7 length fractional part in z */ st,fraction-z = <7>; + /* + * 50 mA typical 80 mA max touchscreen drivers + * current limit value + */ st,i-drive = <1>; }; + stmpe_adc { + compatible = "st,stmpe-adc"; + st,norequest-mask = <0x0F>; + }; +}; diff --git a/dts/Bindings/input/touchscreen/sx8654.txt b/dts/Bindings/input/touchscreen/sx8654.txt index 4886c4aa29..0ebe6dd043 100644 --- a/dts/Bindings/input/touchscreen/sx8654.txt +++ b/dts/Bindings/input/touchscreen/sx8654.txt @@ -1,10 +1,17 @@ * Semtech SX8654 I2C Touchscreen Controller Required properties: -- compatible: must be "semtech,sx8654" +- compatible: must be one of the following, depending on the model: + "semtech,sx8650" + "semtech,sx8654" + "semtech,sx8655" + "semtech,sx8656" - reg: i2c slave address - interrupts: touch controller interrupt +Optional properties: + - reset-gpios: GPIO specification for the NRST input + Example: sx8654@48 { @@ -12,4 +19,5 @@ Example: reg = <0x48>; interrupt-parent = <&gpio6>; interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>; }; diff --git a/dts/Bindings/input/touchscreen/ti-tsc-adc.txt b/dts/Bindings/input/touchscreen/ti-tsc-adc.txt index b1163bf971..aad5e34965 100644 --- a/dts/Bindings/input/touchscreen/ti-tsc-adc.txt +++ b/dts/Bindings/input/touchscreen/ti-tsc-adc.txt @@ -2,7 +2,12 @@ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Required properties: +- mfd + compatible: Should be + "ti,am3359-tscadc" for AM335x/AM437x SoCs + "ti,am654-tscadc", "ti,am3359-tscadc" for AM654 SoCs - child "tsc" + compatible: Should be "ti,am3359-tsc". ti,wires: Wires refer to application modes i.e. 4/5/8 wire touchscreen support on the platform. ti,x-plate-resistance: X plate resistance @@ -25,6 +30,9 @@ Required properties: AIN0 = 0, AIN1 = 1 and so on till AIN7 = 7. XP = 0, XN = 1, YP = 2, YN = 3. - child "adc" + compatible: Should be + "ti,am3359-adc" for AM335x/AM437x SoCs + "ti,am654-adc", "ti,am3359-adc" for AM654 SoCs ti,adc-channels: List of analog inputs available for ADC. AIN0 = 0, AIN1 = 1 and so on till AIN7 = 7. diff --git a/dts/Bindings/interconnect/interconnect.txt b/dts/Bindings/interconnect/interconnect.txt new file mode 100644 index 0000000000..5a3c575b38 --- /dev/null +++ b/dts/Bindings/interconnect/interconnect.txt @@ -0,0 +1,60 @@ +Interconnect Provider Device Tree Bindings +========================================= + +The purpose of this document is to define a common set of generic interconnect +providers/consumers properties. + + += interconnect providers = + +The interconnect provider binding is intended to represent the interconnect +controllers in the system. Each provider registers a set of interconnect +nodes, which expose the interconnect related capabilities of the interconnect +to consumer drivers. These capabilities can be throughput, latency, priority +etc. The consumer drivers set constraints on interconnect path (or endpoints) +depending on the use case. Interconnect providers can also be interconnect +consumers, such as in the case where two network-on-chip fabrics interface +directly. + +Required properties: +- compatible : contains the interconnect provider compatible string +- #interconnect-cells : number of cells in a interconnect specifier needed to + encode the interconnect node id + +Example: + + snoc: interconnect@580000 { + compatible = "qcom,msm8916-snoc"; + #interconnect-cells = <1>; + reg = <0x580000 0x14000>; + clock-names = "bus_clk", "bus_a_clk"; + clocks = <&rpmcc RPM_SMD_SNOC_CLK>, + <&rpmcc RPM_SMD_SNOC_A_CLK>; + }; + + += interconnect consumers = + +The interconnect consumers are device nodes which dynamically express their +bandwidth requirements along interconnect paths they are connected to. There +can be multiple interconnect providers on a SoC and the consumer may consume +multiple paths from different providers depending on use case and the +components it has to interact with. + +Required properties: +interconnects : Pairs of phandles and interconnect provider specifier to denote + the edge source and destination ports of the interconnect path. + +Optional properties: +interconnect-names : List of interconnect path name strings sorted in the same + order as the interconnects property. Consumers drivers will use + interconnect-names to match interconnect paths with interconnect + specifier pairs. + +Example: + + sdhci@7864000 { + ... + interconnects = <&pnoc MASTER_SDCC_1 &bimc SLAVE_EBI_CH0>; + interconnect-names = "sdhc-mem"; + }; diff --git a/dts/Bindings/interconnect/qcom,sdm845.txt b/dts/Bindings/interconnect/qcom,sdm845.txt new file mode 100644 index 0000000000..5c4f1d9116 --- /dev/null +++ b/dts/Bindings/interconnect/qcom,sdm845.txt @@ -0,0 +1,24 @@ +Qualcomm SDM845 Network-On-Chip interconnect driver binding +----------------------------------------------------------- + +SDM845 interconnect providers support system bandwidth requirements through +RPMh hardware accelerators known as Bus Clock Manager (BCM). The provider is +able to communicate with the BCM through the Resource State Coordinator (RSC) +associated with each execution environment. Provider nodes must reside within +an RPMh device node pertaining to their RSC and each provider maps to a single +RPMh resource. + +Required properties : +- compatible : shall contain only one of the following: + "qcom,sdm845-rsc-hlos" +- #interconnect-cells : should contain 1 + +Examples: + +apps_rsc: rsc { + rsc_hlos: interconnect { + compatible = "qcom,sdm845-rsc-hlos"; + #interconnect-cells = <1>; + }; +}; + diff --git a/dts/Bindings/interrupt-controller/arm,gic-v3.txt b/dts/Bindings/interrupt-controller/arm,gic-v3.txt deleted file mode 100644 index a3be5298a5..0000000000 --- a/dts/Bindings/interrupt-controller/arm,gic-v3.txt +++ /dev/null @@ -1,175 +0,0 @@ -* ARM Generic Interrupt Controller, version 3 - -AArch64 SMP cores are often associated with a GICv3, providing Private -Peripheral Interrupts (PPI), Shared Peripheral Interrupts (SPI), -Software Generated Interrupts (SGI), and Locality-specific Peripheral -Interrupts (LPI). - -Main node required properties: - -- compatible : should at least contain "arm,gic-v3" or either - "qcom,msm8996-gic-v3", "arm,gic-v3" for msm8996 SoCs - to address SoC specific bugs/quirks -- interrupt-controller : Identifies the node as an interrupt controller -- #interrupt-cells : Specifies the number of cells needed to encode an - interrupt source. Must be a single cell with a value of at least 3. - If the system requires describing PPI affinity, then the value must - be at least 4. - - The 1st cell is the interrupt type; 0 for SPI interrupts, 1 for PPI - interrupts. Other values are reserved for future use. - - The 2nd cell contains the interrupt number for the interrupt type. - SPI interrupts are in the range [0-987]. PPI interrupts are in the - range [0-15]. - - The 3rd cell is the flags, encoded as follows: - bits[3:0] trigger type and level flags. - 1 = edge triggered - 4 = level triggered - - The 4th cell is a phandle to a node describing a set of CPUs this - interrupt is affine to. The interrupt must be a PPI, and the node - pointed must be a subnode of the "ppi-partitions" subnode. For - interrupt types other than PPI or PPIs that are not partitionned, - this cell must be zero. See the "ppi-partitions" node description - below. - - Cells 5 and beyond are reserved for future use and must have a value - of 0 if present. - -- reg : Specifies base physical address(s) and size of the GIC - registers, in the following order: - - GIC Distributor interface (GICD) - - GIC Redistributors (GICR), one range per redistributor region - - GIC CPU interface (GICC) - - GIC Hypervisor interface (GICH) - - GIC Virtual CPU interface (GICV) - - GICC, GICH and GICV are optional. - -- interrupts : Interrupt source of the VGIC maintenance interrupt. - -Optional - -- redistributor-stride : If using padding pages, specifies the stride - of consecutive redistributors. Must be a multiple of 64kB. - -- #redistributor-regions: The number of independent contiguous regions - occupied by the redistributors. Required if more than one such - region is present. - -- msi-controller: Boolean property. Identifies the node as an MSI - controller. Only present if the Message Based Interrupt - functionnality is being exposed by the HW, and the mbi-ranges - property present. - -- mbi-ranges: A list of pairs <intid span>, where "intid" is the first - SPI of a range that can be used an MBI, and "span" the size of that - range. Multiple ranges can be provided. Requires "msi-controller" to - be set. - -- mbi-alias: Address property. Base address of an alias of the GICD - region containing only the {SET,CLR}SPI registers to be used if - isolation is required, and if supported by the HW. - -Sub-nodes: - -PPI affinity can be expressed as a single "ppi-partitions" node, -containing a set of sub-nodes, each with the following property: -- affinity: Should be a list of phandles to CPU nodes (as described in - Documentation/devicetree/bindings/arm/cpus.yaml). - -GICv3 has one or more Interrupt Translation Services (ITS) that are -used to route Message Signalled Interrupts (MSI) to the CPUs. - -These nodes must have the following properties: -- compatible : Should at least contain "arm,gic-v3-its". -- msi-controller : Boolean property. Identifies the node as an MSI controller -- #msi-cells: Must be <1>. The single msi-cell is the DeviceID of the device - which will generate the MSI. -- reg: Specifies the base physical address and size of the ITS - registers. - -Optional: -- socionext,synquacer-pre-its: (u32, u32) tuple describing the untranslated - address and size of the pre-ITS window. - -The main GIC node must contain the appropriate #address-cells, -#size-cells and ranges properties for the reg property of all ITS -nodes. - -Examples: - - gic: interrupt-controller@2cf00000 { - compatible = "arm,gic-v3"; - #interrupt-cells = <3>; - #address-cells = <2>; - #size-cells = <2>; - ranges; - interrupt-controller; - reg = <0x0 0x2f000000 0 0x10000>, // GICD - <0x0 0x2f100000 0 0x200000>, // GICR - <0x0 0x2c000000 0 0x2000>, // GICC - <0x0 0x2c010000 0 0x2000>, // GICH - <0x0 0x2c020000 0 0x2000>; // GICV - interrupts = <1 9 4>; - - msi-controller; - mbi-ranges = <256 128>; - - gic-its@2c200000 { - compatible = "arm,gic-v3-its"; - msi-controller; - #msi-cells = <1>; - reg = <0x0 0x2c200000 0 0x20000>; - }; - }; - - gic: interrupt-controller@2c010000 { - compatible = "arm,gic-v3"; - #interrupt-cells = <4>; - #address-cells = <2>; - #size-cells = <2>; - ranges; - interrupt-controller; - redistributor-stride = <0x0 0x40000>; // 256kB stride - #redistributor-regions = <2>; - reg = <0x0 0x2c010000 0 0x10000>, // GICD - <0x0 0x2d000000 0 0x800000>, // GICR 1: CPUs 0-31 - <0x0 0x2e000000 0 0x800000>; // GICR 2: CPUs 32-63 - <0x0 0x2c040000 0 0x2000>, // GICC - <0x0 0x2c060000 0 0x2000>, // GICH - <0x0 0x2c080000 0 0x2000>; // GICV - interrupts = <1 9 4>; - - gic-its@2c200000 { - compatible = "arm,gic-v3-its"; - msi-controller; - #msi-cells = <1>; - reg = <0x0 0x2c200000 0 0x20000>; - }; - - gic-its@2c400000 { - compatible = "arm,gic-v3-its"; - msi-controller; - #msi-cells = <1>; - reg = <0x0 0x2c400000 0 0x20000>; - }; - - ppi-partitions { - part0: interrupt-partition-0 { - affinity = <&cpu0 &cpu2>; - }; - - part1: interrupt-partition-1 { - affinity = <&cpu1 &cpu3>; - }; - }; - }; - - - device@0 { - reg = <0 0 0 4>; - interrupts = <1 1 4 &part0>; - }; diff --git a/dts/Bindings/interrupt-controller/arm,gic-v3.yaml b/dts/Bindings/interrupt-controller/arm,gic-v3.yaml new file mode 100644 index 0000000000..c34df35a25 --- /dev/null +++ b/dts/Bindings/interrupt-controller/arm,gic-v3.yaml @@ -0,0 +1,279 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/arm,gic-v3.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM Generic Interrupt Controller, version 3 + +maintainers: + - Marc Zyngier <marc.zyngier@arm.com> + +description: | + AArch64 SMP cores are often associated with a GICv3, providing Private + Peripheral Interrupts (PPI), Shared Peripheral Interrupts (SPI), + Software Generated Interrupts (SGI), and Locality-specific Peripheral + Interrupts (LPI). + +allOf: + - $ref: /schemas/interrupt-controller.yaml# + +properties: + compatible: + oneOf: + - items: + - enum: + - qcom,msm8996-gic-v3 + - const: arm,gic-v3 + - const: arm,gic-v3 + + interrupt-controller: true + + "#address-cells": + enum: [ 0, 1, 2 ] + "#size-cells": + enum: [ 1, 2 ] + + ranges: true + + "#interrupt-cells": + description: | + Specifies the number of cells needed to encode an interrupt source. + Must be a single cell with a value of at least 3. + If the system requires describing PPI affinity, then the value must + be at least 4. + + The 1st cell is the interrupt type; 0 for SPI interrupts, 1 for PPI + interrupts. Other values are reserved for future use. + + The 2nd cell contains the interrupt number for the interrupt type. + SPI interrupts are in the range [0-987]. PPI interrupts are in the + range [0-15]. + + The 3rd cell is the flags, encoded as follows: + bits[3:0] trigger type and level flags. + 1 = edge triggered + 4 = level triggered + + The 4th cell is a phandle to a node describing a set of CPUs this + interrupt is affine to. The interrupt must be a PPI, and the node + pointed must be a subnode of the "ppi-partitions" subnode. For + interrupt types other than PPI or PPIs that are not partitionned, + this cell must be zero. See the "ppi-partitions" node description + below. + + Cells 5 and beyond are reserved for future use and must have a value + of 0 if present. + enum: [ 3, 4 ] + + reg: + description: | + Specifies base physical address(s) and size of the GIC + registers, in the following order: + - GIC Distributor interface (GICD) + - GIC Redistributors (GICR), one range per redistributor region + - GIC CPU interface (GICC) + - GIC Hypervisor interface (GICH) + - GIC Virtual CPU interface (GICV) + + GICC, GICH and GICV are optional. + minItems: 2 + maxItems: 4096 # Should be enough? + + interrupts: + description: + Interrupt source of the VGIC maintenance interrupt. + maxItems: 1 + + redistributor-stride: + description: + If using padding pages, specifies the stride of consecutive + redistributors. Must be a multiple of 64kB. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint64 + - multipleOf: 0x10000 + exclusiveMinimum: 0 + + "#redistributor-regions": + description: + The number of independent contiguous regions occupied by the + redistributors. Required if more than one such region is present. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - maximum: 4096 # Should be enough? + + msi-controller: + description: + Only present if the Message Based Interrupt functionnality is + being exposed by the HW, and the mbi-ranges property present. + + mbi-ranges: + description: + A list of pairs <intid span>, where "intid" is the first SPI of a range + that can be used an MBI, and "span" the size of that range. Multiple + ranges can be provided. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-matrix + - items: + minItems: 2 + maxItems: 2 + + mbi-alias: + description: + Address property. Base address of an alias of the GICD region containing + only the {SET,CLR}SPI registers to be used if isolation is required, + and if supported by the HW. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + - items: + minItems: 1 + maxItems: 2 + + ppi-partitions: + type: object + description: + PPI affinity can be expressed as a single "ppi-partitions" node, + containing a set of sub-nodes. + patternProperties: + "^interrupt-partition-[0-9]+$": + properties: + affinity: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: + Should be a list of phandles to CPU nodes (as described in + Documentation/devicetree/bindings/arm/cpus.yaml). + + required: + - affinity + +dependencies: + mbi-ranges: [ msi-controller ] + msi-controller: [ mbi-ranges ] + +required: + - compatible + - interrupts + - reg + +patternProperties: + "^gic-its@": false + "^interrupt-controller@[0-9a-f]+$": false + # msi-controller is preferred, but allow other names + "^(msi-controller|gic-its|interrupt-controller)@[0-9a-f]+$": + type: object + description: + GICv3 has one or more Interrupt Translation Services (ITS) that are + used to route Message Signalled Interrupts (MSI) to the CPUs. + properties: + compatible: + const: arm,gic-v3-its + + msi-controller: true + + "#msi-cells": + description: + The single msi-cell is the DeviceID of the device which will generate + the MSI. + const: 1 + + reg: + description: + Specifies the base physical address and size of the ITS registers. + maxItems: 1 + + socionext,synquacer-pre-its: + description: + (u32, u32) tuple describing the untranslated + address and size of the pre-ITS window. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + - items: + minItems: 2 + maxItems: 2 + + required: + - compatible + - msi-controller + - "#msi-cells" + - reg + + additionalProperties: false + +additionalProperties: false + +examples: + - | + gic: interrupt-controller@2cf00000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <3>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + interrupt-controller; + reg = <0x2f000000 0x10000>, // GICD + <0x2f100000 0x200000>, // GICR + <0x2c000000 0x2000>, // GICC + <0x2c010000 0x2000>, // GICH + <0x2c020000 0x2000>; // GICV + interrupts = <1 9 4>; + + msi-controller; + mbi-ranges = <256 128>; + + msi-controller@2c200000 { + compatible = "arm,gic-v3-its"; + msi-controller; + #msi-cells = <1>; + reg = <0x2c200000 0x20000>; + }; + }; + + interrupt-controller@2c010000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <4>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + interrupt-controller; + redistributor-stride = <0x0 0x40000>; // 256kB stride + #redistributor-regions = <2>; + reg = <0x2c010000 0x10000>, // GICD + <0x2d000000 0x800000>, // GICR 1: CPUs 0-31 + <0x2e000000 0x800000>, // GICR 2: CPUs 32-63 + <0x2c040000 0x2000>, // GICC + <0x2c060000 0x2000>, // GICH + <0x2c080000 0x2000>; // GICV + interrupts = <1 9 4>; + + msi-controller@2c200000 { + compatible = "arm,gic-v3-its"; + msi-controller; + #msi-cells = <1>; + reg = <0x2c200000 0x20000>; + }; + + msi-controller@2c400000 { + compatible = "arm,gic-v3-its"; + msi-controller; + #msi-cells = <1>; + reg = <0x2c400000 0x20000>; + }; + + ppi-partitions { + part0: interrupt-partition-0 { + affinity = <&cpu0 &cpu2>; + }; + + part1: interrupt-partition-1 { + affinity = <&cpu1 &cpu3>; + }; + }; + }; + + + device@0 { + reg = <0 4>; + interrupts = <1 1 4 &part0>; + }; + +... diff --git a/dts/Bindings/interrupt-controller/arm,gic.txt b/dts/Bindings/interrupt-controller/arm,gic.txt deleted file mode 100644 index 2f32446486..0000000000 --- a/dts/Bindings/interrupt-controller/arm,gic.txt +++ /dev/null @@ -1,171 +0,0 @@ -* ARM Generic Interrupt Controller - -ARM SMP cores are often associated with a GIC, providing per processor -interrupts (PPI), shared processor interrupts (SPI) and software -generated interrupts (SGI). - -Primary GIC is attached directly to the CPU and typically has PPIs and SGIs. -Secondary GICs are cascaded into the upward interrupt controller and do not -have PPIs or SGIs. - -Main node required properties: - -- compatible : should be one of: - "arm,arm1176jzf-devchip-gic" - "arm,arm11mp-gic" - "arm,cortex-a15-gic" - "arm,cortex-a7-gic" - "arm,cortex-a9-gic" - "arm,eb11mp-gic" - "arm,gic-400" - "arm,pl390" - "arm,tc11mp-gic" - "brcm,brahma-b15-gic" - "nvidia,tegra210-agic" - "qcom,msm-8660-qgic" - "qcom,msm-qgic2" -- interrupt-controller : Identifies the node as an interrupt controller -- #interrupt-cells : Specifies the number of cells needed to encode an - interrupt source. The type shall be a <u32> and the value shall be 3. - - The 1st cell is the interrupt type; 0 for SPI interrupts, 1 for PPI - interrupts. - - The 2nd cell contains the interrupt number for the interrupt type. - SPI interrupts are in the range [0-987]. PPI interrupts are in the - range [0-15]. - - The 3rd cell is the flags, encoded as follows: - bits[3:0] trigger type and level flags. - 1 = low-to-high edge triggered - 2 = high-to-low edge triggered (invalid for SPIs) - 4 = active high level-sensitive - 8 = active low level-sensitive (invalid for SPIs). - bits[15:8] PPI interrupt cpu mask. Each bit corresponds to each of - the 8 possible cpus attached to the GIC. A bit set to '1' indicated - the interrupt is wired to that CPU. Only valid for PPI interrupts. - Also note that the configurability of PPI interrupts is IMPLEMENTATION - DEFINED and as such not guaranteed to be present (most SoC available - in 2014 seem to ignore the setting of this flag and use the hardware - default value). - -- reg : Specifies base physical address(s) and size of the GIC registers. The - first region is the GIC distributor register base and size. The 2nd region is - the GIC cpu interface register base and size. - -Optional -- interrupts : Interrupt source of the parent interrupt controller on - secondary GICs, or VGIC maintenance interrupt on primary GIC (see - below). - -- cpu-offset : per-cpu offset within the distributor and cpu interface - regions, used when the GIC doesn't have banked registers. The offset is - cpu-offset * cpu-nr. - -- clocks : List of phandle and clock-specific pairs, one for each entry - in clock-names. -- clock-names : List of names for the GIC clock input(s). Valid clock names - depend on the GIC variant: - "ic_clk" (for "arm,arm11mp-gic") - "PERIPHCLKEN" (for "arm,cortex-a15-gic") - "PERIPHCLK", "PERIPHCLKEN" (for "arm,cortex-a9-gic") - "clk" (for "arm,gic-400" and "nvidia,tegra210") - "gclk" (for "arm,pl390") - -- power-domains : A phandle and PM domain specifier as defined by bindings of - the power controller specified by phandle, used when the GIC - is part of a Power or Clock Domain. - - -Example: - - intc: interrupt-controller@fff11000 { - compatible = "arm,cortex-a9-gic"; - #interrupt-cells = <3>; - #address-cells = <1>; - interrupt-controller; - reg = <0xfff11000 0x1000>, - <0xfff10100 0x100>; - }; - - -* GIC virtualization extensions (VGIC) - -For ARM cores that support the virtualization extensions, additional -properties must be described (they only exist if the GIC is the -primary interrupt controller). - -Required properties: - -- reg : Additional regions specifying the base physical address and - size of the VGIC registers. The first additional region is the GIC - virtual interface control register base and size. The 2nd additional - region is the GIC virtual cpu interface register base and size. - -- interrupts : VGIC maintenance interrupt. - -Example: - - interrupt-controller@2c001000 { - compatible = "arm,cortex-a15-gic"; - #interrupt-cells = <3>; - interrupt-controller; - reg = <0x2c001000 0x1000>, - <0x2c002000 0x2000>, - <0x2c004000 0x2000>, - <0x2c006000 0x2000>; - interrupts = <1 9 0xf04>; - }; - - -* GICv2m extension for MSI/MSI-x support (Optional) - -Certain revisions of GIC-400 supports MSI/MSI-x via V2M register frame(s). -This is enabled by specifying v2m sub-node(s). - -Required properties: - -- compatible : The value here should contain "arm,gic-v2m-frame". - -- msi-controller : Identifies the node as an MSI controller. - -- reg : GICv2m MSI interface register base and size - -Optional properties: - -- arm,msi-base-spi : When the MSI_TYPER register contains an incorrect - value, this property should contain the SPI base of - the MSI frame, overriding the HW value. - -- arm,msi-num-spis : When the MSI_TYPER register contains an incorrect - value, this property should contain the number of - SPIs assigned to the frame, overriding the HW value. - -Example: - - interrupt-controller@e1101000 { - compatible = "arm,gic-400"; - #interrupt-cells = <3>; - #address-cells = <2>; - #size-cells = <2>; - interrupt-controller; - interrupts = <1 8 0xf04>; - ranges = <0 0 0 0xe1100000 0 0x100000>; - reg = <0x0 0xe1110000 0 0x01000>, - <0x0 0xe112f000 0 0x02000>, - <0x0 0xe1140000 0 0x10000>, - <0x0 0xe1160000 0 0x10000>; - v2m0: v2m@8000 { - compatible = "arm,gic-v2m-frame"; - msi-controller; - reg = <0x0 0x80000 0 0x1000>; - }; - - .... - - v2mN: v2m@9000 { - compatible = "arm,gic-v2m-frame"; - msi-controller; - reg = <0x0 0x90000 0 0x1000>; - }; - }; diff --git a/dts/Bindings/interrupt-controller/arm,gic.yaml b/dts/Bindings/interrupt-controller/arm,gic.yaml new file mode 100644 index 0000000000..758fbd7128 --- /dev/null +++ b/dts/Bindings/interrupt-controller/arm,gic.yaml @@ -0,0 +1,223 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/arm,gic.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM Generic Interrupt Controller v1 and v2 + +maintainers: + - Marc Zyngier <marc.zyngier@arm.com> + +description: |+ + ARM SMP cores are often associated with a GIC, providing per processor + interrupts (PPI), shared processor interrupts (SPI) and software + generated interrupts (SGI). + + Primary GIC is attached directly to the CPU and typically has PPIs and SGIs. + Secondary GICs are cascaded into the upward interrupt controller and do not + have PPIs or SGIs. + +allOf: + - $ref: /schemas/interrupt-controller.yaml# + +properties: + compatible: + oneOf: + - items: + - enum: + - arm,arm11mp-gic + - arm,cortex-a15-gic + - arm,cortex-a7-gic + - arm,cortex-a5-gic + - arm,cortex-a9-gic + - arm,eb11mp-gic + - arm,gic-400 + - arm,pl390 + - arm,tc11mp-gic + - nvidia,tegra210-agic + - qcom,msm-8660-qgic + - qcom,msm-qgic2 + + - items: + - const: arm,arm1176jzf-devchip-gic + - const: arm,arm11mp-gic + + - items: + - const: brcm,brahma-b15-gic + - const: arm,cortex-a15-gic + + interrupt-controller: true + + "#address-cells": + enum: [ 0, 1 ] + "#size-cells": + const: 1 + + "#interrupt-cells": + const: 3 + description: | + The 1st cell is the interrupt type; 0 for SPI interrupts, 1 for PPI + interrupts. + + The 2nd cell contains the interrupt number for the interrupt type. + SPI interrupts are in the range [0-987]. PPI interrupts are in the + range [0-15]. + + The 3rd cell is the flags, encoded as follows: + bits[3:0] trigger type and level flags. + 1 = low-to-high edge triggered + 2 = high-to-low edge triggered (invalid for SPIs) + 4 = active high level-sensitive + 8 = active low level-sensitive (invalid for SPIs). + bits[15:8] PPI interrupt cpu mask. Each bit corresponds to each of + the 8 possible cpus attached to the GIC. A bit set to '1' indicated + the interrupt is wired to that CPU. Only valid for PPI interrupts. + Also note that the configurability of PPI interrupts is IMPLEMENTATION + DEFINED and as such not guaranteed to be present (most SoC available + in 2014 seem to ignore the setting of this flag and use the hardware + default value). + + reg: + description: | + Specifies base physical address(s) and size of the GIC registers. The + first region is the GIC distributor register base and size. The 2nd region + is the GIC cpu interface register base and size. + + For GICv2 with virtualization extensions, additional regions are + required for specifying the base physical address and size of the VGIC + registers. The first additional region is the GIC virtual interface + control register base and size. The 2nd additional region is the GIC + virtual cpu interface register base and size. + minItems: 2 + maxItems: 4 + + interrupts: + description: Interrupt source of the parent interrupt controller on + secondary GICs, or VGIC maintenance interrupt on primary GIC (see + below). + maxItems: 1 + + cpu-offset: + description: per-cpu offset within the distributor and cpu interface + regions, used when the GIC doesn't have banked registers. The offset + is cpu-offset * cpu-nr. + $ref: /schemas/types.yaml#/definitions/uint32 + + clocks: + minItems: 1 + maxItems: 2 + + clock-names: + description: List of names for the GIC clock input(s). Valid clock names + depend on the GIC variant. + oneOf: + - const: ic_clk # for "arm,arm11mp-gic" + - const: PERIPHCLKEN # for "arm,cortex-a15-gic" + - items: # for "arm,cortex-a9-gic" + - const: PERIPHCLK + - const: PERIPHCLKEN + - const: clk # for "arm,gic-400" and "nvidia,tegra210" + - const: gclk #for "arm,pl390" + + power-domains: + maxItems: 1 + +required: + - compatible + - reg + +patternProperties: + "^v2m@[0-9a-f]+$": + description: | + * GICv2m extension for MSI/MSI-x support (Optional) + + Certain revisions of GIC-400 supports MSI/MSI-x via V2M register frame(s). + This is enabled by specifying v2m sub-node(s). + + properties: + compatible: + const: arm,gic-v2m-frame + + msi-controller: true + + reg: + maxItems: 1 + description: GICv2m MSI interface register base and size + + arm,msi-base-spi: + description: When the MSI_TYPER register contains an incorrect value, + this property should contain the SPI base of the MSI frame, overriding + the HW value. + $ref: /schemas/types.yaml#/definitions/uint32 + + arm,msi-num-spis: + description: When the MSI_TYPER register contains an incorrect value, + this property should contain the number of SPIs assigned to the + frame, overriding the HW value. + $ref: /schemas/types.yaml#/definitions/uint32 + + required: + - compatible + - msi-controller + - reg + + additionalProperties: false + +additionalProperties: false + +examples: + - | + // GICv1 + intc: interrupt-controller@fff11000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <1>; + interrupt-controller; + reg = <0xfff11000 0x1000>, + <0xfff10100 0x100>; + }; + + - | + // GICv2 + interrupt-controller@2c001000 { + compatible = "arm,cortex-a15-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x2c001000 0x1000>, + <0x2c002000 0x2000>, + <0x2c004000 0x2000>, + <0x2c006000 0x2000>; + interrupts = <1 9 0xf04>; + }; + + - | + // GICv2m extension for MSI/MSI-x support + interrupt-controller@e1101000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + #address-cells = <2>; + #size-cells = <2>; + interrupt-controller; + interrupts = <1 8 0xf04>; + ranges = <0 0 0 0xe1100000 0 0x100000>; + reg = <0x0 0xe1110000 0 0x01000>, + <0x0 0xe112f000 0 0x02000>, + <0x0 0xe1140000 0 0x10000>, + <0x0 0xe1160000 0 0x10000>; + + v2m0: v2m@8000 { + compatible = "arm,gic-v2m-frame"; + msi-controller; + reg = <0x0 0x80000 0 0x1000>; + }; + + //... + + v2mN: v2m@9000 { + compatible = "arm,gic-v2m-frame"; + msi-controller; + reg = <0x0 0x90000 0 0x1000>; + }; + }; +... diff --git a/dts/Bindings/interrupt-controller/fsl,irqsteer.txt b/dts/Bindings/interrupt-controller/fsl,irqsteer.txt index 45790ce6f5..582991c426 100644 --- a/dts/Bindings/interrupt-controller/fsl,irqsteer.txt +++ b/dts/Bindings/interrupt-controller/fsl,irqsteer.txt @@ -6,8 +6,9 @@ Required properties: - "fsl,imx8m-irqsteer" - "fsl,imx-irqsteer" - reg: Physical base address and size of registers. -- interrupts: Should contain the parent interrupt line used to multiplex the - input interrupts. +- interrupts: Should contain the up to 8 parent interrupt lines used to + multiplex the input interrupts. They should be specified sequentially + from output 0 to 7. - clocks: Should contain one clock for entry in clock-names see Documentation/devicetree/bindings/clock/clock-bindings.txt - clock-names: @@ -16,8 +17,8 @@ Required properties: - #interrupt-cells: Specifies the number of cells needed to encode an interrupt source. The value must be 1. - fsl,channel: The output channel that all input IRQs should be steered into. -- fsl,irq-groups: Number of IRQ groups managed by this controller instance. - Each group manages 64 input interrupts. +- fsl,num-irqs: Number of input interrupts of this channel. + Should be multiple of 32 input interrupts and up to 512 interrupts. Example: @@ -28,7 +29,7 @@ Example: clocks = <&clk IMX8MQ_CLK_DISP_APB_ROOT>; clock-names = "ipg"; fsl,channel = <0>; - fsl,irq-groups = <1>; + fsl,num-irqs = <64>; interrupt-controller; #interrupt-cells = <1>; }; diff --git a/dts/Bindings/interrupt-controller/loongson,ls1x-intc.txt b/dts/Bindings/interrupt-controller/loongson,ls1x-intc.txt new file mode 100644 index 0000000000..a63ed9fcb5 --- /dev/null +++ b/dts/Bindings/interrupt-controller/loongson,ls1x-intc.txt @@ -0,0 +1,24 @@ +Loongson ls1x Interrupt Controller + +Required properties: + +- compatible : should be "loongson,ls1x-intc". Valid strings are: + +- reg : Specifies base physical address and size of the registers. +- interrupt-controller : Identifies the node as an interrupt controller +- #interrupt-cells : Specifies the number of cells needed to encode an + interrupt source. The value shall be 2. +- interrupts : Specifies the CPU interrupt the controller is connected to. + +Example: + +intc: interrupt-controller@1fd01040 { + compatible = "loongson,ls1x-intc"; + reg = <0x1fd01040 0x18>; + + interrupt-controller; + #interrupt-cells = <2>; + + interrupt-parent = <&cpu_intc>; + interrupts = <2>; +}; diff --git a/dts/Bindings/interrupt-controller/mediatek,sysirq.txt b/dts/Bindings/interrupt-controller/mediatek,sysirq.txt index 33a98eb449..c5d589108a 100644 --- a/dts/Bindings/interrupt-controller/mediatek,sysirq.txt +++ b/dts/Bindings/interrupt-controller/mediatek,sysirq.txt @@ -9,6 +9,7 @@ Required properties: "mediatek,mt8135-sysirq", "mediatek,mt6577-sysirq": for MT8135 "mediatek,mt8127-sysirq", "mediatek,mt6577-sysirq": for MT8127 "mediatek,mt7622-sysirq", "mediatek,mt6577-sysirq": for MT7622 + "mediatek,mt7623-sysirq", "mediatek,mt6577-sysirq": for MT7623 "mediatek,mt6795-sysirq", "mediatek,mt6577-sysirq": for MT6795 "mediatek,mt6797-sysirq", "mediatek,mt6577-sysirq": for MT6797 "mediatek,mt6765-sysirq", "mediatek,mt6577-sysirq": for MT6765 diff --git a/dts/Bindings/interrupt-controller/renesas,irqc.txt b/dts/Bindings/interrupt-controller/renesas,irqc.txt index 8de96a4fb2..f977ea7617 100644 --- a/dts/Bindings/interrupt-controller/renesas,irqc.txt +++ b/dts/Bindings/interrupt-controller/renesas,irqc.txt @@ -16,6 +16,7 @@ Required properties: - "renesas,irqc-r8a7793" (R-Car M2-N) - "renesas,irqc-r8a7794" (R-Car E2) - "renesas,intc-ex-r8a774a1" (RZ/G2M) + - "renesas,intc-ex-r8a774c0" (RZ/G2E) - "renesas,intc-ex-r8a7795" (R-Car H3) - "renesas,intc-ex-r8a7796" (R-Car M3-W) - "renesas,intc-ex-r8a77965" (R-Car M3-N) diff --git a/dts/Bindings/iommu/nvidia,tegra20-gart.txt b/dts/Bindings/iommu/nvidia,tegra20-gart.txt deleted file mode 100644 index 099d9362eb..0000000000 --- a/dts/Bindings/iommu/nvidia,tegra20-gart.txt +++ /dev/null @@ -1,14 +0,0 @@ -NVIDIA Tegra 20 GART - -Required properties: -- compatible: "nvidia,tegra20-gart" -- reg: Two pairs of cells specifying the physical address and size of - the memory controller registers and the GART aperture respectively. - -Example: - - gart { - compatible = "nvidia,tegra20-gart"; - reg = <0x7000f024 0x00000018 /* controller registers */ - 0x58000000 0x02000000>; /* GART aperture */ - }; diff --git a/dts/Bindings/leds/common.txt b/dts/Bindings/leds/common.txt index aa1399814a..70876ac113 100644 --- a/dts/Bindings/leds/common.txt +++ b/dts/Bindings/leds/common.txt @@ -37,6 +37,18 @@ Optional properties for child nodes: "ide-disk" - LED indicates IDE disk activity (deprecated), in new implementations use "disk-activity" "timer" - LED flashes at a fixed, configurable rate + "pattern" - LED alters the brightness for the specified duration with one + software timer (requires "led-pattern" property) + +- led-pattern : Array of integers with default pattern for certain triggers. + Each trigger may parse this property differently: + - one-shot : two numbers specifying delay on and delay off (in ms), + - timer : two numbers specifying delay on and delay off (in ms), + - pattern : the pattern is given by a series of tuples, of + brightness and duration (in ms). The exact format is + described in: + Documentation/devicetree/bindings/leds/leds-trigger-pattern.txt + - led-max-microamp : Maximum LED supply current in microamperes. This property can be made mandatory for the board configurations diff --git a/dts/Bindings/leds/leds-trigger-pattern.txt b/dts/Bindings/leds/leds-trigger-pattern.txt new file mode 100644 index 0000000000..d3696680bf --- /dev/null +++ b/dts/Bindings/leds/leds-trigger-pattern.txt @@ -0,0 +1,49 @@ +* Pattern format for LED pattern trigger + +The pattern is given by a series of tuples, of brightness and duration (ms). +The LED is expected to traverse the series and each brightness value for the +specified duration. Duration of 0 means brightness should immediately change to +new value, and writing malformed pattern deactivates any active one. + +1. For gradual dimming, the dimming interval now is set as 50 milliseconds. So +the tuple with duration less than dimming interval (50ms) is treated as a step +change of brightness, i.e. the subsequent brightness will be applied without +adding intervening dimming intervals. + +The gradual dimming format of the software pattern values should be: +"brightness_1 duration_1 brightness_2 duration_2 brightness_3 duration_3 ...". +For example (using sysfs interface): + +echo 0 1000 255 2000 > pattern + +It will make the LED go gradually from zero-intensity to max (255) intensity in +1000 milliseconds, then back to zero intensity in 2000 milliseconds: + +LED brightness + ^ +255-| / \ / \ / + | / \ / \ / + | / \ / \ / + | / \ / \ / + 0-| / \/ \/ + +---0----1----2----3----4----5----6------------> time (s) + +2. To make the LED go instantly from one brightness value to another, we should +use zero-time lengths (the brightness must be same as the previous tuple's). So +the format should be: "brightness_1 duration_1 brightness_1 0 brightness_2 +duration_2 brightness_2 0 ...". +For example (using sysfs interface): + +echo 0 1000 0 0 255 2000 255 0 > pattern + +It will make the LED stay off for one second, then stay at max brightness for +two seconds: + +LED brightness + ^ +255-| +---------+ +---------+ + | | | | | + | | | | | + | | | | | + 0-| -----+ +----+ +---- + +---0----1----2----3----4----5----6------------> time (s) diff --git a/dts/Bindings/mailbox/xlnx,zynqmp-ipi-mailbox.txt b/dts/Bindings/mailbox/xlnx,zynqmp-ipi-mailbox.txt new file mode 100644 index 0000000000..4438432bfe --- /dev/null +++ b/dts/Bindings/mailbox/xlnx,zynqmp-ipi-mailbox.txt @@ -0,0 +1,127 @@ +Xilinx IPI Mailbox Controller +======================================== + +The Xilinx IPI(Inter Processor Interrupt) mailbox controller is to manage +messaging between two Xilinx Zynq UltraScale+ MPSoC IPI agents. Each IPI +agent owns registers used for notification and buffers for message. + + +-------------------------------------+ + | Xilinx ZynqMP IPI Controller | + +-------------------------------------+ + +--------------------------------------------------+ +ATF | | + | | + | | + +--------------------------+ | + | | + | | + +--------------------------------------------------+ + +------------------------------------------+ + | +----------------+ +----------------+ | +Hardware | | IPI Agent | | IPI Buffers | | + | | Registers | | | | + | | | | | | + | +----------------+ +----------------+ | + | | + | Xilinx IPI Agent Block | + +------------------------------------------+ + + +Controller Device Node: +=========================== +Required properties: +-------------------- +IPI agent node: +- compatible: Shall be: "xlnx,zynqmp-ipi-mailbox" +- interrupt-parent: Phandle for the interrupt controller +- interrupts: Interrupt information corresponding to the + interrupt-names property. +- xlnx,ipi-id: local Xilinx IPI agent ID +- #address-cells: number of address cells of internal IPI mailbox nodes +- #size-cells: number of size cells of internal IPI mailbox nodes + +Internal IPI mailbox node: +- reg: IPI buffers address ranges +- reg-names: Names of the reg resources. It should have: + * local_request_region + - IPI request msg buffer written by local and read + by remote + * local_response_region + - IPI response msg buffer written by local and read + by remote + * remote_request_region + - IPI request msg buffer written by remote and read + by local + * remote_response_region + - IPI response msg buffer written by remote and read + by local +- #mbox-cells: Shall be 1. It contains: + * tx(0) or rx(1) channel +- xlnx,ipi-id: remote Xilinx IPI agent ID of which the mailbox is + connected to. + +Optional properties: +-------------------- +- method: The method of accessing the IPI agent registers. + Permitted values are: "smc" and "hvc". Default is + "smc". + +Client Device Node: +=========================== +Required properties: +-------------------- +- mboxes: Standard property to specify a mailbox + (See ./mailbox.txt) +- mbox-names: List of identifier strings for each mailbox + channel. + +Example: +=========================== + zynqmp_ipi { + compatible = "xlnx,zynqmp-ipi-mailbox"; + interrupt-parent = <&gic>; + interrupts = <0 29 4>; + xlnx,ipi-id = <0>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + /* APU<->RPU0 IPI mailbox controller */ + ipi_mailbox_rpu0: mailbox@ff90400 { + reg = <0xff990400 0x20>, + <0xff990420 0x20>, + <0xff990080 0x20>, + <0xff9900a0 0x20>; + reg-names = "local_request_region", + "local_response_region", + "remote_request_region", + "remote_response_region"; + #mbox-cells = <1>; + xlnx,ipi-id = <1>; + }; + /* APU<->RPU1 IPI mailbox controller */ + ipi_mailbox_rpu1: mailbox@ff990440 { + reg = <0xff990440 0x20>, + <0xff990460 0x20>, + <0xff990280 0x20>, + <0xff9902a0 0x20>; + reg-names = "local_request_region", + "local_response_region", + "remote_request_region", + "remote_response_region"; + #mbox-cells = <1>; + xlnx,ipi-id = <2>; + }; + }; + rpu0 { + ... + mboxes = <&ipi_mailbox_rpu0 0>, + <&ipi_mailbox_rpu0 1>; + mbox-names = "tx", "rx"; + }; + rpu1 { + ... + mboxes = <&ipi_mailbox_rpu1 0>, + <&ipi_mailbox_rpu1 1>; + mbox-names = "tx", "rx"; + }; diff --git a/dts/Bindings/media/i2c/adv748x.txt b/dts/Bindings/media/i2c/adv748x.txt index 5dddc95f9c..4f91686e54 100644 --- a/dts/Bindings/media/i2c/adv748x.txt +++ b/dts/Bindings/media/i2c/adv748x.txt @@ -48,7 +48,16 @@ are numbered as follows. TXA source 10 TXB source 11 -The digital output port nodes must contain at least one endpoint. +The digital output port nodes, when present, shall contain at least one +endpoint. Each of those endpoints shall contain the data-lanes property as +described in video-interfaces.txt. + +Required source endpoint properties: + - data-lanes: an array of physical data lane indexes + The accepted value(s) for this property depends on which of the two + sources are described. For TXA 1, 2 or 4 data lanes can be described + while for TXB only 1 data lane is valid. See video-interfaces.txt + for detailed description. Ports are optional if they are not connected to anything at the hardware level. diff --git a/dts/Bindings/media/i2c/melexis,mlx90640.txt b/dts/Bindings/media/i2c/melexis,mlx90640.txt new file mode 100644 index 0000000000..060d2b7a58 --- /dev/null +++ b/dts/Bindings/media/i2c/melexis,mlx90640.txt @@ -0,0 +1,20 @@ +* Melexis MLX90640 FIR Sensor + +Melexis MLX90640 FIR sensor support which allows recording of thermal data +with 32x24 resolution excluding 2 lines of coefficient data that is used by +userspace to render processed frames. + +Required Properties: + - compatible : Must be "melexis,mlx90640" + - reg : i2c address of the device + +Example: + + i2c0@1c22000 { + ... + mlx90640@33 { + compatible = "melexis,mlx90640"; + reg = <0x33>; + }; + ... + }; diff --git a/dts/Bindings/media/i2c/mt9m001.txt b/dts/Bindings/media/i2c/mt9m001.txt new file mode 100644 index 0000000000..c920552b03 --- /dev/null +++ b/dts/Bindings/media/i2c/mt9m001.txt @@ -0,0 +1,38 @@ +MT9M001: 1/2-Inch Megapixel Digital Image Sensor + +The MT9M001 is an SXGA-format with a 1/2-inch CMOS active-pixel digital +image sensor. It is programmable through I2C interface. + +Required Properties: + +- compatible: shall be "onnn,mt9m001". +- clocks: reference to the master clock into sensor + +Optional Properties: + +- reset-gpios: GPIO handle which is connected to the reset pin of the chip. + Active low. +- standby-gpios: GPIO handle which is connected to the standby pin of the chip. + Active high. + +The device node must contain one 'port' child node with one 'endpoint' child +sub-node for its digital output video port, in accordance with the video +interface bindings defined in: +Documentation/devicetree/bindings/media/video-interfaces.txt + +Example: + + &i2c1 { + camera-sensor@5d { + compatible = "onnn,mt9m001"; + reg = <0x5d>; + reset-gpios = <&gpio0 0 GPIO_ACTIVE_LOW>; + standby-gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>; + clocks = <&camera_clk>; + port { + mt9m001_out: endpoint { + remote-endpoint = <&vcap_in>; + }; + }; + }; + }; diff --git a/dts/Bindings/media/i2c/ov5645.txt b/dts/Bindings/media/i2c/ov5645.txt index fd7aec9f8e..72ad992f77 100644 --- a/dts/Bindings/media/i2c/ov5645.txt +++ b/dts/Bindings/media/i2c/ov5645.txt @@ -26,9 +26,9 @@ Example: &i2c1 { ... - ov5645: ov5645@78 { + ov5645: ov5645@3c { compatible = "ovti,ov5645"; - reg = <0x78>; + reg = <0x3c>; enable-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; reset-gpios = <&gpio5 20 GPIO_ACTIVE_LOW>; @@ -37,7 +37,7 @@ Example: clocks = <&clks 200>; clock-names = "xclk"; - clock-frequency = <23880000>; + clock-frequency = <24000000>; vdddo-supply = <&camera_dovdd_1v8>; vdda-supply = <&camera_avdd_2v8>; diff --git a/dts/Bindings/media/imx7-csi.txt b/dts/Bindings/media/imx7-csi.txt new file mode 100644 index 0000000000..3c07bc676b --- /dev/null +++ b/dts/Bindings/media/imx7-csi.txt @@ -0,0 +1,45 @@ +Freescale i.MX7 CMOS Sensor Interface +===================================== + +csi node +-------- + +This is device node for the CMOS Sensor Interface (CSI) which enables the chip +to connect directly to external CMOS image sensors. + +Required properties: + +- compatible : "fsl,imx7-csi"; +- reg : base address and length of the register set for the device; +- interrupts : should contain CSI interrupt; +- clocks : list of clock specifiers, see + Documentation/devicetree/bindings/clock/clock-bindings.txt for details; +- clock-names : must contain "axi", "mclk" and "dcic" entries, matching + entries in the clock property; + +The device node shall contain one 'port' child node with one child 'endpoint' +node, according to the bindings defined in: +Documentation/devicetree/bindings/media/video-interfaces.txt. + +In the following example a remote endpoint is a video multiplexer. + +example: + + csi: csi@30710000 { + #address-cells = <1>; + #size-cells = <0>; + + compatible = "fsl,imx7-csi"; + reg = <0x30710000 0x10000>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_CLK_DUMMY>, + <&clks IMX7D_CSI_MCLK_ROOT_CLK>, + <&clks IMX7D_CLK_DUMMY>; + clock-names = "axi", "mclk", "dcic"; + + port { + csi_from_csi_mux: endpoint { + remote-endpoint = <&csi_mux_to_csi>; + }; + }; + }; diff --git a/dts/Bindings/media/imx7-mipi-csi2.txt b/dts/Bindings/media/imx7-mipi-csi2.txt new file mode 100644 index 0000000000..71fd74ed3e --- /dev/null +++ b/dts/Bindings/media/imx7-mipi-csi2.txt @@ -0,0 +1,90 @@ +Freescale i.MX7 Mipi CSI2 +========================= + +mipi_csi2 node +-------------- + +This is the device node for the MIPI CSI-2 receiver core in i.MX7 SoC. It is +compatible with previous version of Samsung D-phy. + +Required properties: + +- compatible : "fsl,imx7-mipi-csi2"; +- reg : base address and length of the register set for the device; +- interrupts : should contain MIPI CSIS interrupt; +- clocks : list of clock specifiers, see + Documentation/devicetree/bindings/clock/clock-bindings.txt for details; +- clock-names : must contain "pclk", "wrap" and "phy" entries, matching + entries in the clock property; +- power-domains : a phandle to the power domain, see + Documentation/devicetree/bindings/power/power_domain.txt for details. +- reset-names : should include following entry "mrst"; +- resets : a list of phandle, should contain reset entry of + reset-names; +- phy-supply : from the generic phy bindings, a phandle to a regulator that + provides power to MIPI CSIS core; + +Optional properties: + +- clock-frequency : The IP's main (system bus) clock frequency in Hz, default + value when this property is not specified is 166 MHz; +- fsl,csis-hs-settle : differential receiver (HS-RX) settle time; + +The device node should contain two 'port' child nodes with one child 'endpoint' +node, according to the bindings defined in: + Documentation/devicetree/bindings/ media/video-interfaces.txt. + The following are properties specific to those nodes. + +port node +--------- + +- reg : (required) can take the values 0 or 1, where 0 shall be + related to the sink port and port 1 shall be the source + one; + +endpoint node +------------- + +- data-lanes : (required) an array specifying active physical MIPI-CSI2 + data input lanes and their mapping to logical lanes; this + shall only be applied to port 0 (sink port), the array's + content is unused only its length is meaningful, + in this case the maximum length supported is 2; + +example: + + mipi_csi: mipi-csi@30750000 { + #address-cells = <1>; + #size-cells = <0>; + + compatible = "fsl,imx7-mipi-csi2"; + reg = <0x30750000 0x10000>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_IPG_ROOT_CLK>, + <&clks IMX7D_MIPI_CSI_ROOT_CLK>, + <&clks IMX7D_MIPI_DPHY_ROOT_CLK>; + clock-names = "pclk", "wrap", "phy"; + clock-frequency = <166000000>; + power-domains = <&pgc_mipi_phy>; + phy-supply = <®_1p0d>; + resets = <&src IMX7_RESET_MIPI_PHY_MRST>; + reset-names = "mrst"; + fsl,csis-hs-settle = <3>; + + port@0 { + reg = <0>; + + mipi_from_sensor: endpoint { + remote-endpoint = <&ov2680_to_mipi>; + data-lanes = <1>; + }; + }; + + port@1 { + reg = <1>; + + mipi_vc0_to_csi_mux: endpoint { + remote-endpoint = <&csi_mux_from_mipi_vc0>; + }; + }; + }; diff --git a/dts/Bindings/media/mediatek-vcodec.txt b/dts/Bindings/media/mediatek-vcodec.txt index 2a615d84a6..b6b5dde6ab 100644 --- a/dts/Bindings/media/mediatek-vcodec.txt +++ b/dts/Bindings/media/mediatek-vcodec.txt @@ -66,6 +66,15 @@ vcodec_dec: vcodec@16000000 { "vencpll", "venc_lt_sel", "vdec_bus_clk_src"; + assigned-clocks = <&topckgen CLK_TOP_VENC_LT_SEL>, + <&topckgen CLK_TOP_CCI400_SEL>, + <&topckgen CLK_TOP_VDEC_SEL>, + <&apmixedsys CLK_APMIXED_VCODECPLL>, + <&apmixedsys CLK_APMIXED_VENCPLL>; + assigned-clock-parents = <&topckgen CLK_TOP_VCODECPLL_370P5>, + <&topckgen CLK_TOP_UNIVPLL_D2>, + <&topckgen CLK_TOP_VCODECPLL>; + assigned-clock-rates = <0>, <0>, <0>, <1482000000>, <800000000>; }; vcodec_enc: vcodec@18002000 { @@ -105,4 +114,8 @@ vcodec_dec: vcodec@16000000 { "venc_sel", "venc_lt_sel_src", "venc_lt_sel"; + assigned-clocks = <&topckgen CLK_TOP_VENC_SEL>, + <&topckgen CLK_TOP_VENC_LT_SEL>; + assigned-clock-parents = <&topckgen CLK_TOP_VENCPLL_D2>, + <&topckgen CLK_TOP_UNIVPLL1_D2>; }; diff --git a/dts/Bindings/media/rcar_vin.txt b/dts/Bindings/media/rcar_vin.txt index 0dd84a183c..224a4615b4 100644 --- a/dts/Bindings/media/rcar_vin.txt +++ b/dts/Bindings/media/rcar_vin.txt @@ -7,12 +7,13 @@ family of devices. Each VIN instance has a single parallel input that supports RGB and YUV video, with both external synchronization and BT.656 synchronization for the latter. Depending on the instance the VIN input is connected to external SoC pins, or -on Gen3 platforms to a CSI-2 receiver. +on Gen3 and RZ/G2 platforms to a CSI-2 receiver. - compatible: Must be one or more of the following - "renesas,vin-r8a7743" for the R8A7743 device - "renesas,vin-r8a7744" for the R8A7744 device - "renesas,vin-r8a7745" for the R8A7745 device + - "renesas,vin-r8a774c0" for the R8A774C0 device - "renesas,vin-r8a7778" for the R8A7778 device - "renesas,vin-r8a7779" for the R8A7779 device - "renesas,vin-r8a7790" for the R8A7790 device @@ -61,10 +62,10 @@ The per-board settings Gen2 platforms: - data-enable-active: polarity of CLKENB signal, see [1] for description. Default is active high. -The per-board settings Gen3 platforms: +The per-board settings Gen3 and RZ/G2 platforms: -Gen3 platforms can support both a single connected parallel input source -from external SoC pins (port@0) and/or multiple parallel input sources +Gen3 and RZ/G2 platforms can support both a single connected parallel input +source from external SoC pins (port@0) and/or multiple parallel input sources from local SoC CSI-2 receivers (port@1) depending on SoC. - renesas,id - ID number of the VIN, VINx in the documentation. diff --git a/dts/Bindings/media/renesas,fcp.txt b/dts/Bindings/media/renesas,fcp.txt index 3ec91803ba..79c37395b3 100644 --- a/dts/Bindings/media/renesas,fcp.txt +++ b/dts/Bindings/media/renesas,fcp.txt @@ -2,8 +2,9 @@ Renesas R-Car Frame Compression Processor (FCP) ----------------------------------------------- The FCP is a companion module of video processing modules in the Renesas R-Car -Gen3 SoCs. It provides data compression and decompression, data caching, and -conversion of AXI transactions in order to reduce the memory bandwidth. +Gen3 and RZ/G2 SoCs. It provides data compression and decompression, data +caching, and conversion of AXI transactions in order to reduce the memory +bandwidth. There are three types of FCP: FCP for Codec (FCPC), FCP for VSP (FCPV) and FCP for FDP (FCPF). Their configuration and behaviour depend on the module they diff --git a/dts/Bindings/media/renesas,rcar-csi2.txt b/dts/Bindings/media/renesas,rcar-csi2.txt index 541d936b62..d63275e17a 100644 --- a/dts/Bindings/media/renesas,rcar-csi2.txt +++ b/dts/Bindings/media/renesas,rcar-csi2.txt @@ -2,12 +2,13 @@ Renesas R-Car MIPI CSI-2 ------------------------ The R-Car CSI-2 receiver device provides MIPI CSI-2 capabilities for the -Renesas R-Car family of devices. It is used in conjunction with the +Renesas R-Car and RZ/G2 family of devices. It is used in conjunction with the R-Car VIN module, which provides the video capture capabilities. Mandatory properties -------------------- - compatible: Must be one or more of the following + - "renesas,r8a774c0-csi2" for the R8A774C0 device. - "renesas,r8a7795-csi2" for the R8A7795 device. - "renesas,r8a7796-csi2" for the R8A7796 device. - "renesas,r8a77965-csi2" for the R8A77965 device. diff --git a/dts/Bindings/media/renesas,vsp1.txt b/dts/Bindings/media/renesas,vsp1.txt index 16427017cb..cd5a955b2e 100644 --- a/dts/Bindings/media/renesas,vsp1.txt +++ b/dts/Bindings/media/renesas,vsp1.txt @@ -2,13 +2,13 @@ The VSP is a video processing engine that supports up-/down-scaling, alpha blending, color space conversion and various other image processing features. -It can be found in the Renesas R-Car second generation SoCs. +It can be found in the Renesas R-Car Gen2, R-Car Gen3, RZ/G1, and RZ/G2 SoCs. Required properties: - compatible: Must contain one of the following values - - "renesas,vsp1" for the R-Car Gen2 VSP1 - - "renesas,vsp2" for the R-Car Gen3 VSP2 + - "renesas,vsp1" for the R-Car Gen2 and RZ/G1 VSP1 + - "renesas,vsp2" for the R-Car Gen3 and RZ/G2 VSP2 - reg: Base address and length of the registers block for the VSP. - interrupts: VSP interrupt specifier. diff --git a/dts/Bindings/media/si470x.txt b/dts/Bindings/media/si470x.txt new file mode 100644 index 0000000000..a940355836 --- /dev/null +++ b/dts/Bindings/media/si470x.txt @@ -0,0 +1,26 @@ +* Silicon Labs FM Radio receiver + +The Silicon Labs Si470x is family of FM radio receivers with receive power scan +supporting 76-108 MHz, programmable through an I2C interface. +Some of them includes an RDS encoder. + +Required Properties: +- compatible: Should contain "silabs,si470x" +- reg: the I2C address of the device + +Optional Properties: +- interrupts : The interrupt number +- reset-gpios: GPIO specifier for the chips reset line + +Example: + +&i2c2 { + si470x@63 { + compatible = "silabs,si470x"; + reg = <0x63>; + + interrupt-parent = <&gpj2>; + interrupts = <4 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&gpj2 5 GPIO_ACTIVE_HIGH>; + }; +}; diff --git a/dts/Bindings/media/sun6i-csi.txt b/dts/Bindings/media/sun6i-csi.txt index d4ab34f224..0dd540bb03 100644 --- a/dts/Bindings/media/sun6i-csi.txt +++ b/dts/Bindings/media/sun6i-csi.txt @@ -6,8 +6,9 @@ Allwinner V3s SoC features a CSI module(CSI1) with parallel interface. Required properties: - compatible: value must be one of: * "allwinner,sun6i-a31-csi" - * "allwinner,sun8i-h3-csi", "allwinner,sun6i-a31-csi" + * "allwinner,sun8i-h3-csi" * "allwinner,sun8i-v3s-csi" + * "allwinner,sun50i-a64-csi" - reg: base address and size of the memory-mapped region. - interrupts: interrupt associated to this IP - clocks: phandles to the clocks feeding the CSI diff --git a/dts/Bindings/memory-controllers/nvidia,tegra20-mc.txt b/dts/Bindings/memory-controllers/nvidia,tegra20-mc.txt index 7d60a50a4f..e55328237d 100644 --- a/dts/Bindings/memory-controllers/nvidia,tegra20-mc.txt +++ b/dts/Bindings/memory-controllers/nvidia,tegra20-mc.txt @@ -1,26 +1,37 @@ NVIDIA Tegra20 MC(Memory Controller) Required properties: -- compatible : "nvidia,tegra20-mc" -- reg : Should contain 2 register ranges(address and length); see the - example below. Note that the MC registers are interleaved with the - GART registers, and hence must be represented as multiple ranges. +- compatible : "nvidia,tegra20-mc-gart" +- reg : Should contain 2 register ranges: physical base address and length of + the controller's registers and the GART aperture respectively. +- clocks: Must contain an entry for each entry in clock-names. + See ../clocks/clock-bindings.txt for details. +- clock-names: Must include the following entries: + - mc: the module's clock input - interrupts : Should contain MC General interrupt. - #reset-cells : Should be 1. This cell represents memory client module ID. The assignments may be found in header file <dt-bindings/memory/tegra20-mc.h> or in the TRM documentation. +- #iommu-cells: Should be 0. This cell represents the number of cells in an + IOMMU specifier needed to encode an address. GART supports only a single + address space that is shared by all devices, therefore no additional + information needed for the address encoding. Example: mc: memory-controller@7000f000 { - compatible = "nvidia,tegra20-mc"; - reg = <0x7000f000 0x024 - 0x7000f03c 0x3c4>; - interrupts = <0 77 0x04>; + compatible = "nvidia,tegra20-mc-gart"; + reg = <0x7000f000 0x400 /* controller registers */ + 0x58000000 0x02000000>; /* GART aperture */ + clocks = <&tegra_car TEGRA20_CLK_MC>; + clock-names = "mc"; + interrupts = <GIC_SPI 77 0x04>; #reset-cells = <1>; + #iommu-cells = <0>; }; video-codec@6001a000 { compatible = "nvidia,tegra20-vde"; ... resets = <&mc TEGRA20_MC_RESET_VDE>; + iommus = <&mc>; }; diff --git a/dts/Bindings/mfd/aspeed-lpc.txt b/dts/Bindings/mfd/aspeed-lpc.txt index 34dd89087c..86446074e2 100644 --- a/dts/Bindings/mfd/aspeed-lpc.txt +++ b/dts/Bindings/mfd/aspeed-lpc.txt @@ -135,6 +135,8 @@ Required properties: - clocks: contains a phandle to the syscon node describing the clocks. There should then be one cell representing the clock to use +Optional properties: + - memory-region: A phandle to a reserved_memory region to be used for the LPC to AHB mapping diff --git a/dts/Bindings/mfd/cirrus,lochnagar.txt b/dts/Bindings/mfd/cirrus,lochnagar.txt new file mode 100644 index 0000000000..004b0158cf --- /dev/null +++ b/dts/Bindings/mfd/cirrus,lochnagar.txt @@ -0,0 +1,68 @@ +Cirrus Logic Lochnagar Audio Development Board + +Lochnagar is an evaluation and development board for Cirrus Logic +Smart CODEC and Amp devices. It allows the connection of most Cirrus +Logic devices on mini-cards, as well as allowing connection of +various application processor systems to provide a full evaluation +platform. Audio system topology, clocking and power can all be +controlled through the Lochnagar, allowing the device under test +to be used in a variety of possible use cases. + +Also see these documents for generic binding information: + [1] GPIO : ../gpio/gpio.txt + +And these for relevant defines: + [2] include/dt-bindings/pinctrl/lochnagar.h + [3] include/dt-bindings/clock/lochnagar.h + +And these documents for the required sub-node binding details: + [4] Clock: ../clock/cirrus,lochnagar.txt + [5] Pinctrl: ../pinctrl/cirrus,lochnagar.txt + [6] Regulator: ../regulator/cirrus,lochnagar.txt + +Required properties: + + - compatible : One of the following strings: + "cirrus,lochnagar1" + "cirrus,lochnagar2" + + - reg : I2C slave address + + - reset-gpios : Reset line to the Lochnagar, see [1]. + +Required sub-nodes: + + - lochnagar-clk : Binding for the clocking components, see [4]. + + - lochnagar-pinctrl : Binding for the pin control components, see [5]. + +Optional sub-nodes: + + - Bindings for the regulator components, see [6]. Only available on + Lochnagar 2. + +Optional properties: + + - present-gpios : Host present line, indicating the presence of a + host system, see [1]. This can be omitted if the present line is + tied in hardware. + +Example: + +lochnagar: lochnagar@22 { + compatible = "cirrus,lochnagar2"; + reg = <0x22>; + + reset-gpios = <&gpio0 55 0>; + present-gpios = <&gpio0 60 0>; + + lochnagar-clk { + compatible = "cirrus,lochnagar2-clk"; + ... + }; + + lochnagar-pinctrl { + compatible = "cirrus,lochnagar-pinctrl"; + ... + }; +}; diff --git a/dts/Bindings/mfd/rohm,bd71837-pmic.txt b/dts/Bindings/mfd/rohm,bd71837-pmic.txt index a4b056761e..d5f68ac78d 100644 --- a/dts/Bindings/mfd/rohm,bd71837-pmic.txt +++ b/dts/Bindings/mfd/rohm,bd71837-pmic.txt @@ -23,6 +23,20 @@ Required properties: Optional properties: - clock-output-names : Should contain name for output clock. +- rohm,reset-snvs-powered : Transfer BD718x7 to SNVS state at reset. + +The BD718x7 supports two different HW states as reset target states. States +are called as SNVS and READY. At READY state all the PMIC power outputs go +down and OTP is reload. At the SNVS state all other logic and external +devices apart from the SNVS power domain are shut off. Please refer to NXP +i.MX8 documentation for further information regarding SNVS state. When a +reset is done via SNVS state the PMIC OTP data is not reload. This causes +power outputs that have been under SW control to stay down when reset has +switched power state to SNVS. If reset is done via READY state the power +outputs will be returned to HW control by OTP loading. Thus the reset +target state is set to READY by default. If SNVS state is used the boot +crucial regulators must have the regulator-always-on and regulator-boot-on +properties set in regulator node. Example: @@ -43,6 +57,7 @@ Example: #clock-cells = <0>; clocks = <&osc 0>; clock-output-names = "bd71837-32k-out"; + rohm,reset-snvs-powered; regulators { buck1: BUCK1 { @@ -50,8 +65,10 @@ Example: regulator-min-microvolt = <700000>; regulator-max-microvolt = <1300000>; regulator-boot-on; + regulator-always-on; regulator-ramp-delay = <1250>; }; + // [...] }; }; diff --git a/dts/Bindings/mfd/st,stpmic1.txt b/dts/Bindings/mfd/st,stpmic1.txt new file mode 100644 index 0000000000..afd45c0895 --- /dev/null +++ b/dts/Bindings/mfd/st,stpmic1.txt @@ -0,0 +1,61 @@ +* STMicroelectronics STPMIC1 Power Management IC + +Required properties: +- compatible: : "st,stpmic1" +- reg: : The I2C slave address for the STPMIC1 chip. +- interrupts: : The interrupt line the device is connected to. +- #interrupt-cells: : Should be 1. +- interrupt-controller: : Marks the device node as an interrupt controller. + Interrupt numbers are defined at + dt-bindings/mfd/st,stpmic1.h. + +STPMIC1 consists in a varied group of sub-devices. +Each sub-device binding is be described in own documentation file. + +Device Description +------ ------------ +st,stpmic1-onkey : Power on key, see ../input/st,stpmic1-onkey.txt +st,stpmic1-regulators : Regulators, see ../regulator/st,stpmic1-regulator.txt +st,stpmic1-wdt : Watchdog, see ../watchdog/st,stpmic1-wdt.txt + +Example: + +#include <dt-bindings/mfd/st,stpmic1.h> + +pmic: pmic@33 { + compatible = "st,stpmic1"; + reg = <0x33>; + interrupt-parent = <&gpioa>; + interrupts = <0 2>; + + interrupt-controller; + #interrupt-cells = <2>; + + onkey { + compatible = "st,stpmic1-onkey"; + interrupts = <IT_PONKEY_F 0>,<IT_PONKEY_R 1>; + interrupt-names = "onkey-falling", "onkey-rising"; + power-off-time-sec = <10>; + }; + + watchdog { + compatible = "st,stpmic1-wdt"; + }; + + regulators { + compatible = "st,stpmic1-regulators"; + + vdd_core: buck1 { + regulator-name = "vdd_core"; + regulator-boot-on; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1200000>; + }; + vdd: buck3 { + regulator-name = "vdd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-pull-down; + }; + }; diff --git a/dts/Bindings/mfd/stmpe.txt b/dts/Bindings/mfd/stmpe.txt index c797c05cd3..d4408a4171 100644 --- a/dts/Bindings/mfd/stmpe.txt +++ b/dts/Bindings/mfd/stmpe.txt @@ -4,15 +4,29 @@ STMPE is an MFD device which may expose the following inbuilt devices: gpio, keypad, touchscreen, adc, pwm, rotator. Required properties: - - compatible : "st,stmpe[610|801|811|1600|1601|2401|2403]" - - reg : I2C/SPI address of the device + - compatible : "st,stmpe[610|801|811|1600|1601|2401|2403]" + - reg : I2C/SPI address of the device Optional properties: - - interrupts : The interrupt outputs from the controller - - interrupt-controller : Marks the device node as an interrupt controller - - wakeup-source : Marks the input device as wakable - - st,autosleep-timeout : Valid entries (ms); 4, 16, 32, 64, 128, 256, 512 and 1024 - - irq-gpio : If present, which GPIO to use for event IRQ + - interrupts : The interrupt outputs from the controller + - interrupt-controller : Marks the device node as an interrupt controller + - wakeup-source : Marks the input device as wakable + - st,autosleep-timeout : Valid entries (ms); 4, 16, 32, 64, 128, 256, 512 and 1024 + - irq-gpio : If present, which GPIO to use for event IRQ + +Optional properties for devices with touch and ADC (STMPE811|STMPE610): + - st,sample-time : ADC conversion time in number of clock. + 0 -> 36 clocks 4 -> 80 clocks (recommended) + 1 -> 44 clocks 5 -> 96 clocks + 2 -> 56 clocks 6 -> 124 clocks + 3 -> 64 clocks + - st,mod-12b : ADC Bit mode + 0 -> 10bit ADC 1 -> 12bit ADC + - st,ref-sel : ADC reference source + 0 -> internal 1 -> external + - st,adc-freq : ADC Clock speed + 0 -> 1.625 MHz 2 || 3 -> 6.5 MHz + 1 -> 3.25 MHz Example: diff --git a/dts/Bindings/mips/lantiq/rcu-gphy.txt b/dts/Bindings/mips/lantiq/rcu-gphy.txt deleted file mode 100644 index a0c19bd1ce..0000000000 --- a/dts/Bindings/mips/lantiq/rcu-gphy.txt +++ /dev/null @@ -1,36 +0,0 @@ -Lantiq XWAY SoC GPHY binding -============================ - -This binding describes a software-defined ethernet PHY, provided by the RCU -module on newer Lantiq XWAY SoCs (xRX200 and newer). - -------------------------------------------------------------------------------- -Required properties: -- compatible : Should be one of - "lantiq,xrx200a1x-gphy" - "lantiq,xrx200a2x-gphy" - "lantiq,xrx300-gphy" - "lantiq,xrx330-gphy" -- reg : Addrress of the GPHY FW load address register -- resets : Must reference the RCU GPHY reset bit -- reset-names : One entry, value must be "gphy" or optional "gphy2" -- clocks : A reference to the (PMU) GPHY clock gate - -Optional properties: -- lantiq,gphy-mode : GPHY_MODE_GE (default) or GPHY_MODE_FE as defined in - <dt-bindings/mips/lantiq_xway_gphy.h> - - -------------------------------------------------------------------------------- -Example for the GPHys on the xRX200 SoCs: - -#include <dt-bindings/mips/lantiq_rcu_gphy.h> - gphy0: gphy@20 { - compatible = "lantiq,xrx200a2x-gphy"; - reg = <0x20 0x4>; - - resets = <&reset0 31 30>, <&reset1 7 7>; - reset-names = "gphy", "gphy2"; - clocks = <&pmu0 XRX200_PMU_GATE_GPHY>; - lantiq,gphy-mode = <GPHY_MODE_GE>; - }; diff --git a/dts/Bindings/mips/lantiq/rcu.txt b/dts/Bindings/mips/lantiq/rcu.txt index 7f0822b4be..58d51f480c 100644 --- a/dts/Bindings/mips/lantiq/rcu.txt +++ b/dts/Bindings/mips/lantiq/rcu.txt @@ -26,24 +26,6 @@ Example of the RCU bindings on a xRX200 SoC: ranges = <0x0 0x203000 0x100>; big-endian; - gphy0: gphy@20 { - compatible = "lantiq,xrx200a2x-gphy"; - reg = <0x20 0x4>; - - resets = <&reset0 31 30>, <&reset1 7 7>; - reset-names = "gphy", "gphy2"; - lantiq,gphy-mode = <GPHY_MODE_GE>; - }; - - gphy1: gphy@68 { - compatible = "lantiq,xrx200a2x-gphy"; - reg = <0x68 0x4>; - - resets = <&reset0 29 28>, <&reset1 6 6>; - reset-names = "gphy", "gphy2"; - lantiq,gphy-mode = <GPHY_MODE_GE>; - }; - reset0: reset-controller@10 { compatible = "lantiq,xrx200-reset"; reg = <0x10 4>, <0x14 4>; diff --git a/dts/Bindings/misc/qcom,fastrpc.txt b/dts/Bindings/misc/qcom,fastrpc.txt new file mode 100644 index 0000000000..2a1827ab50 --- /dev/null +++ b/dts/Bindings/misc/qcom,fastrpc.txt @@ -0,0 +1,78 @@ +Qualcomm Technologies, Inc. FastRPC Driver + +The FastRPC implements an IPC (Inter-Processor Communication) +mechanism that allows for clients to transparently make remote method +invocations across DSP and APPS boundaries. This enables developers +to offload tasks to the DSP and free up the application processor for +other tasks. + +- compatible: + Usage: required + Value type: <stringlist> + Definition: must be "qcom,fastrpc" + +- label + Usage: required + Value type: <string> + Definition: should specify the dsp domain name this fastrpc + corresponds to. must be one of this: "adsp", "mdsp", "sdsp", "cdsp" + +- #address-cells + Usage: required + Value type: <u32> + Definition: Must be 1 + +- #size-cells + Usage: required + Value type: <u32> + Definition: Must be 0 + += COMPUTE BANKS +Each subnode of the Fastrpc represents compute context banks available +on the dsp. +- All Compute context banks MUST contain the following properties: + +- compatible: + Usage: required + Value type: <stringlist> + Definition: must be "qcom,fastrpc-compute-cb" + +- reg + Usage: required + Value type: <u32> + Definition: Context Bank ID. + +- qcom,nsessions: + Usage: Optional + Value type: <u32> + Defination: A value indicating how many sessions can share this + context bank. Defaults to 1 when this property + is not specified. + +Example: + +adsp-pil { + compatible = "qcom,msm8996-adsp-pil"; + ... + smd-edge { + label = "lpass"; + fastrpc { + compatible = "qcom,fastrpc"; + qcom,smd-channels = "fastrpcsmd-apps-dsp"; + label = "adsp"; + #address-cells = <1>; + #size-cells = <0>; + + cb@1 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <1>; + }; + + cb@2 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <2>; + }; + ... + }; + }; +}; diff --git a/dts/Bindings/mmc/fsl-imx-esdhc.txt b/dts/Bindings/mmc/fsl-imx-esdhc.txt index 9201a7d8d7..540c65ed9c 100644 --- a/dts/Bindings/mmc/fsl-imx-esdhc.txt +++ b/dts/Bindings/mmc/fsl-imx-esdhc.txt @@ -15,6 +15,7 @@ Required properties: "fsl,imx6q-usdhc" "fsl,imx6sl-usdhc" "fsl,imx6sx-usdhc" + "fsl,imx6ull-usdhc" "fsl,imx7d-usdhc" "fsl,imx8qxp-usdhc" diff --git a/dts/Bindings/mmc/mmc.txt b/dts/Bindings/mmc/mmc.txt index f5a0923b34..cdbcfd3a4f 100644 --- a/dts/Bindings/mmc/mmc.txt +++ b/dts/Bindings/mmc/mmc.txt @@ -62,6 +62,8 @@ Optional properties: be referred to mmc-pwrseq-simple.txt. But now it's reused as a tunable delay waiting for I/O signalling and card power supply to be stable, regardless of whether pwrseq-simple is used. Default to 10ms if no available. +- supports-cqe : The presence of this property indicates that the corresponding + MMC host controller supports HW command queue feature. *NOTE* on CD and WP polarity. To use common for all SD/MMC host controllers line polarity properties, we have to fix the meaning of the "normal" and "inverted" diff --git a/dts/Bindings/mmc/nvidia,tegra20-sdhci.txt b/dts/Bindings/mmc/nvidia,tegra20-sdhci.txt index 32b4b4e419..2cecdc71d9 100644 --- a/dts/Bindings/mmc/nvidia,tegra20-sdhci.txt +++ b/dts/Bindings/mmc/nvidia,tegra20-sdhci.txt @@ -39,12 +39,16 @@ sdhci@c8000200 { bus-width = <8>; }; -Optional properties for Tegra210 and Tegra186: +Optional properties for Tegra210, Tegra186 and Tegra194: - pinctrl-names, pinctrl-0, pinctrl-1 : Specify pad voltage configurations. Valid pinctrl-names are "sdmmc-3v3" and "sdmmc-1v8" for controllers supporting multiple voltage levels. The order of names should correspond to the pin configuration states in pinctrl-0 and pinctrl-1. +- pinctrl-names : "sdmmc-3v3-drv" and "sdmmc-1v8-drv" are applicable for + Tegra210 where pad config registers are in the pinmux register domain + for pull-up-strength and pull-down-strength values configuration when + using pads at 3V3 and 1V8 levels. - nvidia,only-1-8-v : The presence of this property indicates that the controller operates at a 1.8 V fixed I/O voltage. - nvidia,pad-autocal-pull-up-offset-3v3, diff --git a/dts/Bindings/mmc/ti-omap.txt b/dts/Bindings/mmc/ti-omap.txt index 8de5799697..02fd31cf36 100644 --- a/dts/Bindings/mmc/ti-omap.txt +++ b/dts/Bindings/mmc/ti-omap.txt @@ -24,31 +24,3 @@ Examples: dmas = <&sdma 61 &sdma 62>; dma-names = "tx", "rx"; }; - -* TI MMC host controller for OMAP1 and 2420 - -The MMC Host Controller on TI OMAP1 and 2420 family provides -an interface for MMC, SD, and SDIO types of memory cards. - -This file documents differences between the core properties described -by mmc.txt and the properties used by the omap mmc driver. - -Note that this driver will not work with omap2430 or later omaps, -please see the omap hsmmc driver for the current omaps. - -Required properties: -- compatible: Must be "ti,omap2420-mmc", for OMAP2420 controllers -- ti,hwmods: For 2420, must be "msdi<n>", where n is controller - instance starting 1 - -Examples: - - msdi1: mmc@4809c000 { - compatible = "ti,omap2420-mmc"; - ti,hwmods = "msdi1"; - reg = <0x4809c000 0x80>; - interrupts = <83>; - dmas = <&sdma 61 &sdma 62>; - dma-names = "tx", "rx"; - }; - diff --git a/dts/Bindings/mtd/amlogic,meson-nand.txt b/dts/Bindings/mtd/amlogic,meson-nand.txt new file mode 100644 index 0000000000..3983c11e06 --- /dev/null +++ b/dts/Bindings/mtd/amlogic,meson-nand.txt @@ -0,0 +1,60 @@ +Amlogic NAND Flash Controller (NFC) for GXBB/GXL/AXG family SoCs + +This file documents the properties in addition to those available in +the MTD NAND bindings. + +Required properties: +- compatible : contains one of: + - "amlogic,meson-gxl-nfc" + - "amlogic,meson-axg-nfc" +- clocks : + A list of phandle + clock-specifier pairs for the clocks listed + in clock-names. + +- clock-names: Should contain the following: + "core" - NFC module gate clock + "device" - device clock from eMMC sub clock controller + "rx" - rx clock phase + "tx" - tx clock phase + +- amlogic,mmc-syscon : Required for NAND clocks, it's shared with SD/eMMC + controller port C + +Optional children nodes: +Children nodes represent the available nand chips. + +Other properties: +see Documentation/devicetree/bindings/mtd/nand.txt for generic bindings. + +Example demonstrate on AXG SoC: + + sd_emmc_c_clkc: mmc@7000 { + compatible = "amlogic,meson-axg-mmc-clkc", "syscon"; + reg = <0x0 0x7000 0x0 0x800>; + }; + + nand-controller@7800 { + compatible = "amlogic,meson-axg-nfc"; + reg = <0x0 0x7800 0x0 0x100>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>; + + clocks = <&clkc CLKID_SD_EMMC_C>, + <&sd_emmc_c_clkc CLKID_MMC_DIV>, + <&sd_emmc_c_clkc CLKID_MMC_PHASE_RX>, + <&sd_emmc_c_clkc CLKID_MMC_PHASE_TX>; + clock-names = "core", "device", "rx", "tx"; + amlogic,mmc-syscon = <&sd_emmc_c_clkc>; + + pinctrl-names = "default"; + pinctrl-0 = <&nand_pins>; + + nand@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + + nand-on-flash-bbt; + }; + }; diff --git a/dts/Bindings/mtd/cadence-quadspi.txt b/dts/Bindings/mtd/cadence-quadspi.txt index bb2075df9b..4345c3a6f5 100644 --- a/dts/Bindings/mtd/cadence-quadspi.txt +++ b/dts/Bindings/mtd/cadence-quadspi.txt @@ -4,6 +4,7 @@ Required properties: - compatible : should be one of the following: Generic default - "cdns,qspi-nor". For TI 66AK2G SoC - "ti,k2g-qspi", "cdns,qspi-nor". + For TI AM654 SoC - "ti,am654-ospi", "cdns,qspi-nor". - reg : Contains two entries, each of which is a tuple consisting of a physical address and length. The first entry is the address and length of the controller register set. The second entry is the diff --git a/dts/Bindings/mtd/mtk-quadspi.txt b/dts/Bindings/mtd/mtk-quadspi.txt index 56d3668e2c..a12e3b5c49 100644 --- a/dts/Bindings/mtd/mtk-quadspi.txt +++ b/dts/Bindings/mtd/mtk-quadspi.txt @@ -1,4 +1,4 @@ -* Serial NOR flash controller for MTK MT81xx (and similar) +* Serial NOR flash controller for MediaTek SoCs Required properties: - compatible: For mt8173, compatible should be "mediatek,mt8173-nor", @@ -10,6 +10,7 @@ Required properties: "mediatek,mt2712-nor", "mediatek,mt8173-nor" "mediatek,mt7622-nor", "mediatek,mt8173-nor" "mediatek,mt7623-nor", "mediatek,mt8173-nor" + "mediatek,mt7629-nor", "mediatek,mt8173-nor" "mediatek,mt8173-nor" - reg: physical base address and length of the controller's register - clocks: the phandle of the clocks needed by the nor controller diff --git a/dts/Bindings/mtd/stm32-fmc2-nand.txt b/dts/Bindings/mtd/stm32-fmc2-nand.txt new file mode 100644 index 0000000000..ad2bef8265 --- /dev/null +++ b/dts/Bindings/mtd/stm32-fmc2-nand.txt @@ -0,0 +1,61 @@ +STMicroelectronics Flexible Memory Controller 2 (FMC2) +NAND Interface + +Required properties: +- compatible: Should be one of: + * st,stm32mp15-fmc2 +- reg: NAND flash controller memory areas. + First region contains the register location. + Regions 2 to 4 respectively contain the data, command, + and address space for CS0. + Regions 5 to 7 contain the same areas for CS1. +- interrupts: The interrupt number +- pinctrl-0: Standard Pinctrl phandle (see: pinctrl/pinctrl-bindings.txt) +- clocks: The clock needed by the NAND flash controller + +Optional properties: +- resets: Reference to a reset controller asserting the FMC controller +- dmas: DMA specifiers (see: dma/stm32-mdma.txt) +- dma-names: Must be "tx", "rx" and "ecc" + +* NAND device bindings: + +Required properties: +- reg: describes the CS lines assigned to the NAND device. + +Optional properties: +- nand-on-flash-bbt: see nand.txt +- nand-ecc-strength: see nand.txt +- nand-ecc-step-size: see nand.txt + +The following ECC strength and step size are currently supported: + - nand-ecc-strength = <1>, nand-ecc-step-size = <512> (Hamming) + - nand-ecc-strength = <4>, nand-ecc-step-size = <512> (BCH4) + - nand-ecc-strength = <8>, nand-ecc-step-size = <512> (BCH8) (default) + +Example: + + fmc: nand-controller@58002000 { + compatible = "st,stm32mp15-fmc2"; + reg = <0x58002000 0x1000>, + <0x80000000 0x1000>, + <0x88010000 0x1000>, + <0x88020000 0x1000>, + <0x81000000 0x1000>, + <0x89010000 0x1000>, + <0x89020000 0x1000>; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc FMC_K>; + resets = <&rcc FMC_R>; + pinctrl-names = "default"; + pinctrl-0 = <&fmc_pins_a>; + #address-cells = <1>; + #size-cells = <0>; + + nand@0 { + reg = <0>; + nand-on-flash-bbt; + #address-cells = <1>; + #size-cells = <1>; + }; + }; diff --git a/dts/Bindings/net/btusb.txt b/dts/Bindings/net/btusb.txt index 37d67926dd..b1ad6ee68e 100644 --- a/dts/Bindings/net/btusb.txt +++ b/dts/Bindings/net/btusb.txt @@ -9,6 +9,9 @@ Required properties: (more may be added later) are: "usb1286,204e" (Marvell 8997) + "usbcf3,e300" (Qualcomm QCA6174A) + "usb4ca,301a" (Qualcomm QCA6174A (Lite-On)) + Also, vendors that use btusb may have device additional properties, e.g: Documentation/devicetree/bindings/net/marvell-bt-8xxx.txt diff --git a/dts/Bindings/net/cpsw-phy-sel.txt b/dts/Bindings/net/cpsw-phy-sel.txt index 764c0c79b4..5d76f991c0 100644 --- a/dts/Bindings/net/cpsw-phy-sel.txt +++ b/dts/Bindings/net/cpsw-phy-sel.txt @@ -1,4 +1,4 @@ -TI CPSW Phy mode Selection Device Tree Bindings +TI CPSW Phy mode Selection Device Tree Bindings (DEPRECATED) ----------------------------------------------- Required properties: diff --git a/dts/Bindings/net/dsa/dsa.txt b/dts/Bindings/net/dsa/dsa.txt index 35694c0c37..d66a5292b9 100644 --- a/dts/Bindings/net/dsa/dsa.txt +++ b/dts/Bindings/net/dsa/dsa.txt @@ -71,6 +71,10 @@ properties, described in binding documents: Documentation/devicetree/bindings/net/fixed-link.txt for details. +- local-mac-address : See + Documentation/devicetree/bindings/net/ethernet.txt + for details. + Example The following example shows three switches on three MDIO busses, @@ -97,6 +101,7 @@ linked into one DSA cluster. port@1 { reg = <1>; label = "lan1"; + local-mac-address = [00 00 00 00 00 00]; }; port@2 { diff --git a/dts/Bindings/net/dsa/ksz.txt b/dts/Bindings/net/dsa/ksz.txt index 0f407fb371..e7db7268fd 100644 --- a/dts/Bindings/net/dsa/ksz.txt +++ b/dts/Bindings/net/dsa/ksz.txt @@ -7,6 +7,11 @@ Required properties: of the following: - "microchip,ksz9477" - "microchip,ksz9897" + - "microchip,ksz9896" + - "microchip,ksz9567" + - "microchip,ksz8565" + - "microchip,ksz9893" + - "microchip,ksz9563" Optional properties: @@ -19,58 +24,96 @@ Examples: Ethernet switch connected via SPI to the host, CPU port wired to eth0: - eth0: ethernet@10001000 { - fixed-link { - speed = <1000>; - full-duplex; - }; - }; + eth0: ethernet@10001000 { + fixed-link { + speed = <1000>; + full-duplex; + }; + }; - spi1: spi@f8008000 { - pinctrl-0 = <&pinctrl_spi_ksz>; - cs-gpios = <&pioC 25 0>; - id = <1>; + spi1: spi@f8008000 { + pinctrl-0 = <&pinctrl_spi_ksz>; + cs-gpios = <&pioC 25 0>; + id = <1>; - ksz9477: ksz9477@0 { - compatible = "microchip,ksz9477"; - reg = <0>; + ksz9477: ksz9477@0 { + compatible = "microchip,ksz9477"; + reg = <0>; - spi-max-frequency = <44000000>; - spi-cpha; - spi-cpol; + spi-max-frequency = <44000000>; + spi-cpha; + spi-cpol; - ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; - label = "lan1"; - }; - port@1 { - reg = <1>; - label = "lan2"; - }; - port@2 { - reg = <2>; - label = "lan3"; - }; - port@3 { - reg = <3>; - label = "lan4"; - }; - port@4 { - reg = <4>; - label = "lan5"; - }; - port@5 { - reg = <5>; - label = "cpu"; - ethernet = <ð0>; - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; - }; - }; + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + label = "lan1"; + }; + port@1 { + reg = <1>; + label = "lan2"; + }; + port@2 { + reg = <2>; + label = "lan3"; + }; + port@3 { + reg = <3>; + label = "lan4"; + }; + port@4 { + reg = <4>; + label = "lan5"; + }; + port@5 { + reg = <5>; + label = "cpu"; + ethernet = <ð0>; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; + ksz8565: ksz8565@0 { + compatible = "microchip,ksz8565"; + reg = <0>; + + spi-max-frequency = <44000000>; + spi-cpha; + spi-cpol; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + label = "lan1"; + }; + port@1 { + reg = <1>; + label = "lan2"; + }; + port@2 { + reg = <2>; + label = "lan3"; + }; + port@3 { + reg = <3>; + label = "lan4"; + }; + port@6 { + reg = <6>; + label = "cpu"; + ethernet = <ð0>; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; + }; diff --git a/dts/Bindings/net/dsa/mt7530.txt b/dts/Bindings/net/dsa/mt7530.txt index aa3527f71f..47aa205ee0 100644 --- a/dts/Bindings/net/dsa/mt7530.txt +++ b/dts/Bindings/net/dsa/mt7530.txt @@ -3,12 +3,16 @@ Mediatek MT7530 Ethernet switch Required properties: -- compatible: Must be compatible = "mediatek,mt7530"; +- compatible: may be compatible = "mediatek,mt7530" + or compatible = "mediatek,mt7621" - #address-cells: Must be 1. - #size-cells: Must be 0. - mediatek,mcm: Boolean; if defined, indicates that either MT7530 is the part on multi-chip module belong to MT7623A has or the remotely standalone chip as the function MT7623N reference board provided for. + +If compatible mediatek,mt7530 is set then the following properties are required + - core-supply: Phandle to the regulator node necessary for the core power. - io-supply: Phandle to the regulator node necessary for the I/O power. See Documentation/devicetree/bindings/regulator/mt6323-regulator.txt diff --git a/dts/Bindings/net/dsa/qca8k.txt b/dts/Bindings/net/dsa/qca8k.txt index bbcb255c31..93a7469e70 100644 --- a/dts/Bindings/net/dsa/qca8k.txt +++ b/dts/Bindings/net/dsa/qca8k.txt @@ -12,10 +12,15 @@ Required properties: Subnodes: The integrated switch subnode should be specified according to the binding -described in dsa/dsa.txt. As the QCA8K switches do not have a N:N mapping of -port and PHY id, each subnode describing a port needs to have a valid phandle -referencing the internal PHY connected to it. The CPU port of this switch is -always port 0. +described in dsa/dsa.txt. If the QCA8K switch is connect to a SoC's external +mdio-bus each subnode describing a port needs to have a valid phandle +referencing the internal PHY it is connected to. This is because there's no +N:N mapping of port and PHY id. + +Don't use mixed external and internal mdio-bus configurations, as this is +not supported by the hardware. + +The CPU port of this switch is always port 0. A CPU port node has the following optional node: @@ -31,8 +36,9 @@ For QCA8K the 'fixed-link' sub-node supports only the following properties: - 'full-duplex' (boolean, optional), to indicate that full duplex is used. When absent, half duplex is assumed. -Example: +Examples: +for the external mdio-bus configuration: &mdio0 { phy_port1: phy@0 { @@ -55,12 +61,12 @@ Example: reg = <4>; }; - switch0@0 { + switch@10 { compatible = "qca,qca8337"; #address-cells = <1>; #size-cells = <0>; - reg = <0>; + reg = <0x10>; ports { #address-cells = <1>; @@ -108,3 +114,56 @@ Example: }; }; }; + +for the internal master mdio-bus configuration: + + &mdio0 { + switch@10 { + compatible = "qca,qca8337"; + #address-cells = <1>; + #size-cells = <0>; + + reg = <0x10>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "cpu"; + ethernet = <&gmac1>; + phy-mode = "rgmii"; + fixed-link { + speed = 1000; + full-duplex; + }; + }; + + port@1 { + reg = <1>; + label = "lan1"; + }; + + port@2 { + reg = <2>; + label = "lan2"; + }; + + port@3 { + reg = <3>; + label = "lan3"; + }; + + port@4 { + reg = <4>; + label = "lan4"; + }; + + port@5 { + reg = <5>; + label = "wan"; + }; + }; + }; + }; diff --git a/dts/Bindings/net/fsl-enetc.txt b/dts/Bindings/net/fsl-enetc.txt new file mode 100644 index 0000000000..c812e25ae9 --- /dev/null +++ b/dts/Bindings/net/fsl-enetc.txt @@ -0,0 +1,69 @@ +* ENETC ethernet device tree bindings + +Depending on board design and ENETC port type (internal or +external) there are two supported link modes specified by +below device tree bindings. + +Required properties: + +- reg : Specifies PCIe Device Number and Function + Number of the ENETC endpoint device, according + to parent node bindings. +- compatible : Should be "fsl,enetc". + +1) The ENETC external port is connected to a MDIO configurable phy: + +In this case, the ENETC node should include a "mdio" sub-node +that in turn should contain the "ethernet-phy" node describing the +external phy. Below properties are required, their bindings +already defined in ethernet.txt or phy.txt, under +Documentation/devicetree/bindings/net/*. + +Required: + +- phy-handle : Phandle to a PHY on the MDIO bus. + Defined in ethernet.txt. + +- phy-connection-type : Defined in ethernet.txt. + +- mdio : "mdio" node, defined in mdio.txt. + +- ethernet-phy : "ethernet-phy" node, defined in phy.txt. + +Example: + + ethernet@0,0 { + compatible = "fsl,enetc"; + reg = <0x000000 0 0 0 0>; + phy-handle = <&sgmii_phy0>; + phy-connection-type = "sgmii"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + sgmii_phy0: ethernet-phy@2 { + reg = <0x2>; + }; + }; + }; + +2) The ENETC port is an internal port or has a fixed-link external +connection: + +In this case, the ENETC port node defines a fixed link connection, +as specified by "fixed-link.txt", under +Documentation/devicetree/bindings/net/*. + +Required: + +- fixed-link : "fixed-link" node, defined in "fixed-link.txt". + +Example: + ethernet@0,2 { + compatible = "fsl,enetc"; + reg = <0x000200 0 0 0 0>; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; diff --git a/dts/Bindings/net/macb.txt b/dts/Bindings/net/macb.txt index 3e17ac1d5d..174f292d8a 100644 --- a/dts/Bindings/net/macb.txt +++ b/dts/Bindings/net/macb.txt @@ -3,8 +3,8 @@ Required properties: - compatible: Should be "cdns,[<chip>-]{macb|gem}" Use "cdns,at91rm9200-emac" Atmel at91rm9200 SoC. - Use "cdns,at91sam9260-macb" for Atmel at91sam9 SoCs or the 10/100Mbit IP - available on sama5d3 SoCs. + Use "cdns,at91sam9260-macb" for Atmel at91sam9 SoCs. + Use "cdns,sam9x60-macb" for Microchip sam9x60 SoC. Use "cdns,np4-macb" for NP4 SoC devices. Use "cdns,at32ap7000-macb" for other 10/100 usage or use the generic form: "cdns,macb". Use "cdns,pc302-gem" for Picochip picoXcell pc302 and later devices based on diff --git a/dts/Bindings/net/marvell-armada-370-neta.txt b/dts/Bindings/net/marvell-armada-370-neta.txt index bedcfd5a52..691f886cfc 100644 --- a/dts/Bindings/net/marvell-armada-370-neta.txt +++ b/dts/Bindings/net/marvell-armada-370-neta.txt @@ -19,7 +19,7 @@ Optional properties: "marvell,armada-370-neta" and 9800B for others. - clock-names: List of names corresponding to clocks property; shall be "core" for core clock and "bus" for the optional bus clock. - +- phys: comphy for the ethernet port, see ../phy/phy-bindings.txt Optional properties (valid only for Armada XP/38x): diff --git a/dts/Bindings/net/mdio-mux-multiplexer.txt b/dts/Bindings/net/mdio-mux-multiplexer.txt new file mode 100644 index 0000000000..534e38058f --- /dev/null +++ b/dts/Bindings/net/mdio-mux-multiplexer.txt @@ -0,0 +1,82 @@ +Properties for an MDIO bus multiplexer consumer device + +This is a special case of MDIO mux when MDIO mux is defined as a consumer +of a mux producer device. The mux producer can be of any type like mmio mux +producer, gpio mux producer or generic register based mux producer. + +Required properties in addition to the MDIO Bus multiplexer properties: + +- compatible : should be "mmio-mux-multiplexer" +- mux-controls : mux controller node to use for operating the mux +- mdio-parent-bus : phandle to the parent MDIO bus. + +each child node of mdio bus multiplexer consumer device represent a mdio +bus. + +for more information please refer +Documentation/devicetree/bindings/mux/mux-controller.txt +and Documentation/devicetree/bindings/net/mdio-mux.txt + +Example: +In below example the Mux producer and consumer are separate nodes. + +&i2c0 { + fpga@66 { // fpga connected to i2c + compatible = "fsl,lx2160aqds-fpga", "fsl,fpga-qixis-i2c", + "simple-mfd"; + reg = <0x66>; + + mux: mux-controller { // Mux Producer + compatible = "reg-mux"; + #mux-control-cells = <1>; + mux-reg-masks = <0x54 0xf8>, /* 0: reg 0x54, bits 7:3 */ + <0x54 0x07>; /* 1: reg 0x54, bits 2:0 */ + }; + }; +}; + +mdio-mux-1 { // Mux consumer + compatible = "mdio-mux-multiplexer"; + mux-controls = <&mux 0>; + mdio-parent-bus = <&emdio1>; + #address-cells = <1>; + #size-cells = <0>; + + mdio@0 { + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + mdio@8 { + reg = <0x8>; + #address-cells = <1>; + #size-cells = <0>; + }; + + .. + .. +}; + +mdio-mux-2 { // Mux consumer + compatible = "mdio-mux-multiplexer"; + mux-controls = <&mux 1>; + mdio-parent-bus = <&emdio2>; + #address-cells = <1>; + #size-cells = <0>; + + mdio@0 { + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + mdio@1 { + reg = <0x1>; + #address-cells = <1>; + #size-cells = <0>; + }; + + .. + .. +}; diff --git a/dts/Bindings/net/mediatek-bluetooth.txt b/dts/Bindings/net/mediatek-bluetooth.txt index 14ceb2a5b4..41a7dcc80f 100644 --- a/dts/Bindings/net/mediatek-bluetooth.txt +++ b/dts/Bindings/net/mediatek-bluetooth.txt @@ -33,3 +33,67 @@ Example: clock-names = "ref"; }; }; + +MediaTek UART based Bluetooth Devices +================================== + +This device is a serial attached device to UART device and thus it must be a +child node of the serial node with UART. + +Please refer to the following documents for generic properties: + + Documentation/devicetree/bindings/serial/slave-device.txt + +Required properties: + +- compatible: Must be + "mediatek,mt7663u-bluetooth": for MT7663U device + "mediatek,mt7668u-bluetooth": for MT7668U device +- vcc-supply: Main voltage regulator +- pinctrl-names: Should be "default", "runtime" +- pinctrl-0: Should contain UART RXD low when the device is powered up to + enter proper bootstrap mode. +- pinctrl-1: Should contain UART mode pin ctrl + +Optional properties: + +- reset-gpios: GPIO used to reset the device whose initial state keeps low, + if the GPIO is missing, then board-level design should be + guaranteed. +- current-speed: Current baud rate of the device whose defaults to 921600 + +Example: + + uart1_pins_boot: uart1-default { + pins-dat { + pinmux = <MT7623_PIN_81_URXD1_FUNC_GPIO81>; + output-low; + }; + }; + + uart1_pins_runtime: uart1-runtime { + pins-dat { + pinmux = <MT7623_PIN_81_URXD1_FUNC_URXD1>, + <MT7623_PIN_82_UTXD1_FUNC_UTXD1>; + }; + }; + + uart1: serial@11003000 { + compatible = "mediatek,mt7623-uart", + "mediatek,mt6577-uart"; + reg = <0 0x11003000 0 0x400>; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>; + clocks = <&pericfg CLK_PERI_UART1_SEL>, + <&pericfg CLK_PERI_UART1>; + clock-names = "baud", "bus"; + + bluetooth { + compatible = "mediatek,mt7663u-bluetooth"; + vcc-supply = <®_5v>; + reset-gpios = <&pio 24 GPIO_ACTIVE_LOW>; + pinctrl-names = "default", "runtime"; + pinctrl-0 = <&uart1_pins_boot>; + pinctrl-1 = <&uart1_pins_runtime>; + current-speed = <921600>; + }; + }; diff --git a/dts/Bindings/net/nixge.txt b/dts/Bindings/net/nixge.txt index e55af7f088..85d7240a9b 100644 --- a/dts/Bindings/net/nixge.txt +++ b/dts/Bindings/net/nixge.txt @@ -1,17 +1,53 @@ * NI XGE Ethernet controller Required properties: -- compatible: Should be "ni,xge-enet-2.00" -- reg: Address and length of the register set for the device +- compatible: Should be "ni,xge-enet-3.00", but can be "ni,xge-enet-2.00" for + older device trees with DMA engines co-located in the address map, + with the one reg entry to describe the whole device. +- reg: Address and length of the register set for the device. It contains the + information of registers in the same order as described by reg-names. +- reg-names: Should contain the reg names + "dma": DMA engine control and status region + "ctrl": MDIO and PHY control and status region - interrupts: Should contain tx and rx interrupt - interrupt-names: Should be "rx" and "tx" - phy-mode: See ethernet.txt file in the same directory. -- phy-handle: See ethernet.txt file in the same directory. - nvmem-cells: Phandle of nvmem cell containing the MAC address - nvmem-cell-names: Should be "address" +Optional properties: +- mdio subnode to indicate presence of MDIO controller +- fixed-link : Assume a fixed link. See fixed-link.txt in the same directory. + Use instead of phy-handle. +- phy-handle: See ethernet.txt file in the same directory. + Examples (10G generic PHY): nixge0: ethernet@40000000 { + compatible = "ni,xge-enet-3.00"; + reg = <0x40000000 0x4000 + 0x41002000 0x2000>; + reg-names = "dma", "ctrl"; + + nvmem-cells = <ð1_addr>; + nvmem-cell-names = "address"; + + interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>, <0 30 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "rx", "tx"; + interrupt-parent = <&intc>; + + phy-mode = "xgmii"; + phy-handle = <ðernet_phy1>; + + mdio { + ethernet_phy1: ethernet-phy@4 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <4>; + }; + }; + }; + +Examples (10G generic PHY, no MDIO): + nixge0: ethernet@40000000 { compatible = "ni,xge-enet-2.00"; reg = <0x40000000 0x6000>; @@ -24,9 +60,33 @@ Examples (10G generic PHY): phy-mode = "xgmii"; phy-handle = <ðernet_phy1>; + }; + +Examples (1G generic fixed-link + MDIO): + nixge0: ethernet@40000000 { + compatible = "ni,xge-enet-2.00"; + reg = <0x40000000 0x6000>; - ethernet_phy1: ethernet-phy@4 { - compatible = "ethernet-phy-ieee802.3-c45"; - reg = <4>; + nvmem-cells = <ð1_addr>; + nvmem-cell-names = "address"; + + interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>, <0 30 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "rx", "tx"; + interrupt-parent = <&intc>; + + phy-mode = "xgmii"; + + fixed-link { + speed = <1000>; + pause; + link-gpios = <&gpio0 63 GPIO_ACTIVE_HIGH>; + }; + + mdio { + ethernet_phy1: ethernet-phy@4 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <4>; + }; }; + }; diff --git a/dts/Bindings/net/qcom,ethqos.txt b/dts/Bindings/net/qcom,ethqos.txt new file mode 100644 index 0000000000..fcf5035810 --- /dev/null +++ b/dts/Bindings/net/qcom,ethqos.txt @@ -0,0 +1,64 @@ +Qualcomm Ethernet ETHQOS device + +This documents dwmmac based ethernet device which supports Gigabit +ethernet for version v2.3.0 onwards. + +This device has following properties: + +Required properties: + +- compatible: Should be qcom,qcs404-ethqos" + +- reg: Address and length of the register set for the device + +- reg-names: Should contain register names "stmmaceth", "rgmii" + +- clocks: Should contain phandle to clocks + +- clock-names: Should contain clock names "stmmaceth", "pclk", + "ptp_ref", "rgmii" + +- interrupts: Should contain phandle to interrupts + +- interrupt-names: Should contain interrupt names "macirq", "eth_lpi" + +Rest of the properties are defined in stmmac.txt file in same directory + + +Example: + +ethernet: ethernet@7a80000 { + compatible = "qcom,qcs404-ethqos"; + reg = <0x07a80000 0x10000>, + <0x07a96000 0x100>; + reg-names = "stmmaceth", "rgmii"; + clock-names = "stmmaceth", "pclk", "ptp_ref", "rgmii"; + clocks = <&gcc GCC_ETH_AXI_CLK>, + <&gcc GCC_ETH_SLAVE_AHB_CLK>, + <&gcc GCC_ETH_PTP_CLK>, + <&gcc GCC_ETH_RGMII_CLK>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq", "eth_lpi"; + snps,reset-gpio = <&tlmm 60 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + + snps,txpbl = <8>; + snps,rxpbl = <2>; + snps,aal; + snps,tso; + + phy-handle = <&phy1>; + phy-mode = "rgmii"; + + mdio { + #address-cells = <0x1>; + #size-cells = <0x0>; + compatible = "snps,dwmac-mdio"; + phy1: phy@4 { + device_type = "ethernet-phy"; + reg = <0x4>; + }; + }; + +}; diff --git a/dts/Bindings/net/stm32-dwmac.txt b/dts/Bindings/net/stm32-dwmac.txt index 1341012722..a90eef11dc 100644 --- a/dts/Bindings/net/stm32-dwmac.txt +++ b/dts/Bindings/net/stm32-dwmac.txt @@ -14,8 +14,7 @@ Required properties: - clock-names: Should be "stmmaceth" for the host clock. Should be "mac-clk-tx" for the MAC TX clock. Should be "mac-clk-rx" for the MAC RX clock. - For MPU family need to add also "ethstp" for power mode clock and, - "syscfg-clk" for SYSCFG clock. + For MPU family need to add also "ethstp" for power mode clock - interrupt-names: Should contain a list of interrupt names corresponding to the interrupts in the interrupts property, if available. Should be "macirq" for the main MAC IRQ @@ -24,9 +23,9 @@ Required properties: encompases the glue register, and the offset of the control register. Optional properties: -- clock-names: For MPU family "mac-clk-ck" for PHY without quartz -- st,int-phyclk (boolean) : valid only where PHY do not have quartz and need to be clock - by RCC +- clock-names: For MPU family "eth-ck" for PHY without quartz +- st,eth-clk-sel (boolean) : set this property in RGMII PHY when you want to select RCC clock instead of ETH_CLK125. +- st,eth-ref-clk-sel (boolean) : set this property in RMII mode when you have PHY without crystal 50MHz and want to select RCC clock instead of ETH_REF_CLK. Example: diff --git a/dts/Bindings/net/wireless/mediatek,mt76.txt b/dts/Bindings/net/wireless/mediatek,mt76.txt index 0c17a0ec9b..7b9a776230 100644 --- a/dts/Bindings/net/wireless/mediatek,mt76.txt +++ b/dts/Bindings/net/wireless/mediatek,mt76.txt @@ -4,6 +4,13 @@ This node provides properties for configuring the MediaTek mt76xx wireless device. The node is expected to be specified as a child node of the PCI controller to which the wireless chip is connected. +Alternatively, it can specify the wireless part of the MT7628/MT7688 SoC. +For SoC, use the compatible string "mediatek,mt7628-wmac" and the following +properties: + +- reg: Address and length of the register set for the device. +- interrupts: Main device interrupt + Optional properties: - mac-address: See ethernet.txt in the parent directory @@ -30,3 +37,15 @@ Optional nodes: }; }; }; + +MT7628 example: + +wmac: wmac@10300000 { + compatible = "mediatek,mt7628-wmac"; + reg = <0x10300000 0x100000>; + + interrupt-parent = <&cpuintc>; + interrupts = <6>; + + mediatek,mtd-eeprom = <&factory 0x0000>; +}; diff --git a/dts/Bindings/nvmem/imx-ocotp.txt b/dts/Bindings/nvmem/imx-ocotp.txt index 792bc5fafe..7a999a135e 100644 --- a/dts/Bindings/nvmem/imx-ocotp.txt +++ b/dts/Bindings/nvmem/imx-ocotp.txt @@ -1,7 +1,7 @@ Freescale i.MX6 On-Chip OTP Controller (OCOTP) device tree bindings This binding represents the on-chip eFuse OTP controller found on -i.MX6Q/D, i.MX6DL/S, i.MX6SL, i.MX6SX, i.MX6UL and i.MX6SLL SoCs. +i.MX6Q/D, i.MX6DL/S, i.MX6SL, i.MX6SX, i.MX6UL, i.MX6ULL/ULZ and i.MX6SLL SoCs. Required properties: - compatible: should be one of @@ -9,8 +9,10 @@ Required properties: "fsl,imx6sl-ocotp" (i.MX6SL), or "fsl,imx6sx-ocotp" (i.MX6SX), "fsl,imx6ul-ocotp" (i.MX6UL), + "fsl,imx6ull-ocotp" (i.MX6ULL/ULZ), "fsl,imx7d-ocotp" (i.MX7D/S), "fsl,imx6sll-ocotp" (i.MX6SLL), + "fsl,imx7ulp-ocotp" (i.MX7ULP), followed by "syscon". - #address-cells : Should be 1 - #size-cells : Should be 1 diff --git a/dts/Bindings/nvmem/xlnx,zynqmp-nvmem.txt b/dts/Bindings/nvmem/xlnx,zynqmp-nvmem.txt new file mode 100644 index 0000000000..4881561b3a --- /dev/null +++ b/dts/Bindings/nvmem/xlnx,zynqmp-nvmem.txt @@ -0,0 +1,46 @@ +-------------------------------------------------------------------------- += Zynq UltraScale+ MPSoC nvmem firmware driver binding = +-------------------------------------------------------------------------- +The nvmem_firmware node provides access to the hardware related data +like soc revision, IDCODE... etc, By using the firmware interface. + +Required properties: +- compatible: should be "xlnx,zynqmp-nvmem-fw" + += Data cells = +Are child nodes of silicon id, bindings of which as described in +bindings/nvmem/nvmem.txt + +------- + Example +------- +firmware { + zynqmp_firmware: zynqmp-firmware { + compatible = "xlnx,zynqmp-firmware"; + method = "smc"; + + nvmem_firmware { + compatible = "xlnx,zynqmp-nvmem-fw"; + #address-cells = <1>; + #size-cells = <1>; + + /* Data cells */ + soc_revision: soc_revision { + reg = <0x0 0x4>; + }; + }; + }; +}; + += Data consumers = +Are device nodes which consume nvmem data cells. + +For example: + pcap { + ... + + nvmem-cells = <&soc_revision>; + nvmem-cell-names = "soc_revision"; + + ... + }; diff --git a/dts/Bindings/opp/opp.txt b/dts/Bindings/opp/opp.txt index c396c4c0af..76b6c79604 100644 --- a/dts/Bindings/opp/opp.txt +++ b/dts/Bindings/opp/opp.txt @@ -129,6 +129,9 @@ Optional properties: - opp-microamp-<name>: Named opp-microamp property. Similar to opp-microvolt-<name> property, but for microamp instead. +- opp-level: A value representing the performance level of the device, + expressed as a 32-bit integer. + - clock-latency-ns: Specifies the maximum possible transition latency (in nanoseconds) for switching to this OPP from any other OPP. diff --git a/dts/Bindings/pci/altera-pcie.txt b/dts/Bindings/pci/altera-pcie.txt index 6c396f17c9..816b244a22 100644 --- a/dts/Bindings/pci/altera-pcie.txt +++ b/dts/Bindings/pci/altera-pcie.txt @@ -1,11 +1,13 @@ * Altera PCIe controller Required properties: -- compatible : should contain "altr,pcie-root-port-1.0" +- compatible : should contain "altr,pcie-root-port-1.0" or "altr,pcie-root-port-2.0" - reg: a list of physical base address and length for TXS and CRA. + For "altr,pcie-root-port-2.0", additional HIP base address and length. - reg-names: must include the following entries: "Txs": TX slave port region "Cra": Control register access region + "Hip": Hard IP region (if "altr,pcie-root-port-2.0") - interrupts: specifies the interrupt source of the parent interrupt controller. The format of the interrupt specifier depends on the parent interrupt controller. diff --git a/dts/Bindings/pci/fsl,imx6q-pcie.txt b/dts/Bindings/pci/fsl,imx6q-pcie.txt index d514c1f236..a7f5f5afa0 100644 --- a/dts/Bindings/pci/fsl,imx6q-pcie.txt +++ b/dts/Bindings/pci/fsl,imx6q-pcie.txt @@ -9,6 +9,7 @@ Required properties: - "fsl,imx6sx-pcie", - "fsl,imx6qp-pcie" - "fsl,imx7d-pcie" + - "fsl,imx8mq-pcie" - reg: base address and length of the PCIe controller - interrupts: A list of interrupt outputs of the controller. Must contain an entry for each entry in the interrupt-names property. @@ -45,7 +46,7 @@ Additional required properties for imx6sx-pcie: PCIE_PHY power domains - power-domain-names: Must be "pcie", "pcie_phy" -Additional required properties for imx7d-pcie: +Additional required properties for imx7d-pcie and imx8mq-pcie: - power-domains: Must be set to a phandle pointing to PCIE_PHY power domain - resets: Must contain phandles to PCIe-related reset lines exposed by SRC IP block @@ -53,6 +54,11 @@ Additional required properties for imx7d-pcie: - "pciephy" - "apps" - "turnoff" +- fsl,imx7d-pcie-phy: A phandle to an fsl,imx7d-pcie-phy node. + +Additional required properties for imx8mq-pcie: +- clock-names: Must include the following additional entries: + - "pcie_aux" Example: @@ -79,3 +85,13 @@ Example: clocks = <&clks 144>, <&clks 206>, <&clks 189>; clock-names = "pcie", "pcie_bus", "pcie_phy"; }; + +* Freescale i.MX7d PCIe PHY + +This is the PHY associated with the IMX7d PCIe controller. It's used by the +PCI-e controller via the fsl,imx7d-pcie-phy phandle. + +Required properties: +- compatible: + - "fsl,imx7d-pcie-phy" +- reg: base address and length of the PCIe PHY controller diff --git a/dts/Bindings/pci/layerscape-pci.txt b/dts/Bindings/pci/layerscape-pci.txt index 9b2b8d66d1..e20ceaab9b 100644 --- a/dts/Bindings/pci/layerscape-pci.txt +++ b/dts/Bindings/pci/layerscape-pci.txt @@ -13,6 +13,7 @@ information. Required properties: - compatible: should contain the platform identifier such as: + RC mode: "fsl,ls1021a-pcie" "fsl,ls2080a-pcie", "fsl,ls2085a-pcie" "fsl,ls2088a-pcie" @@ -20,6 +21,8 @@ Required properties: "fsl,ls1046a-pcie" "fsl,ls1043a-pcie" "fsl,ls1012a-pcie" + EP mode: + "fsl,ls1046a-pcie-ep", "fsl,ls-pcie-ep" - reg: base addresses and lengths of the PCIe controller register blocks. - interrupts: A list of interrupt outputs of the controller. Must contain an entry for each entry in the interrupt-names property. diff --git a/dts/Bindings/pci/rcar-pci.txt b/dts/Bindings/pci/rcar-pci.txt index 976ef7bfff..6904882a0e 100644 --- a/dts/Bindings/pci/rcar-pci.txt +++ b/dts/Bindings/pci/rcar-pci.txt @@ -3,6 +3,7 @@ Required properties: compatible: "renesas,pcie-r8a7743" for the R8A7743 SoC; "renesas,pcie-r8a7744" for the R8A7744 SoC; + "renesas,pcie-r8a774c0" for the R8A774C0 SoC; "renesas,pcie-r8a7779" for the R8A7779 SoC; "renesas,pcie-r8a7790" for the R8A7790 SoC; "renesas,pcie-r8a7791" for the R8A7791 SoC; @@ -13,7 +14,8 @@ compatible: "renesas,pcie-r8a7743" for the R8A7743 SoC; "renesas,pcie-r8a77990" for the R8A77990 SoC; "renesas,pcie-rcar-gen2" for a generic R-Car Gen2 or RZ/G1 compatible device. - "renesas,pcie-rcar-gen3" for a generic R-Car Gen3 compatible device. + "renesas,pcie-rcar-gen3" for a generic R-Car Gen3 or + RZ/G2 compatible device. When compatible with the generic version, nodes must list the SoC-specific version corresponding to the platform first diff --git a/dts/Bindings/pci/ti-pci.txt b/dts/Bindings/pci/ti-pci.txt index 452fe48c4f..d5cbfe6b0d 100644 --- a/dts/Bindings/pci/ti-pci.txt +++ b/dts/Bindings/pci/ti-pci.txt @@ -1,14 +1,21 @@ TI PCI Controllers PCIe DesignWare Controller - - compatible: Should be "ti,dra7-pcie" for RC - Should be "ti,dra7-pcie-ep" for EP + - compatible: Should be "ti,dra7-pcie" for RC (deprecated) + Should be "ti,dra7-pcie-ep" for EP (deprecated) + Should be "ti,dra746-pcie-rc" for dra74x/dra76 in RC mode + Should be "ti,dra746-pcie-ep" for dra74x/dra76 in EP mode + Should be "ti,dra726-pcie-rc" for dra72x in RC mode + Should be "ti,dra726-pcie-ep" for dra72x in EP mode - phys : list of PHY specifiers (used by generic PHY framework) - phy-names : must be "pcie-phy0", "pcie-phy1", "pcie-phyN".. based on the number of PHYs as specified in *phys* property. - ti,hwmods : Name of the hwmod associated to the pcie, "pcie<X>", where <X> is the instance number of the pcie from the HW spec. - num-lanes as specified in ../designware-pcie.txt + - ti,syscon-lane-sel : phandle/offset pair. Phandle to the system control + module and the register offset to specify lane + selection. HOST MODE ========= diff --git a/dts/Bindings/phy/cdns,dphy.txt b/dts/Bindings/phy/cdns,dphy.txt new file mode 100644 index 0000000000..1095bc4e72 --- /dev/null +++ b/dts/Bindings/phy/cdns,dphy.txt @@ -0,0 +1,20 @@ +Cadence DPHY +============ + +Cadence DPHY block. + +Required properties: +- compatible: should be set to "cdns,dphy". +- reg: physical base address and length of the DPHY registers. +- clocks: DPHY reference clocks. +- clock-names: must contain "psm" and "pll_ref". +- #phy-cells: must be set to 0. + +Example: + dphy0: dphy@fd0e0000{ + compatible = "cdns,dphy"; + reg = <0x0 0xfd0e0000 0x0 0x1000>; + clocks = <&psm_clk>, <&pll_ref_clk>; + clock-names = "psm", "pll_ref"; + #phy-cells = <0>; + }; diff --git a/dts/Bindings/phy/phy-armada38x-comphy.txt b/dts/Bindings/phy/phy-armada38x-comphy.txt new file mode 100644 index 0000000000..ad49e5c013 --- /dev/null +++ b/dts/Bindings/phy/phy-armada38x-comphy.txt @@ -0,0 +1,40 @@ +mvebu armada 38x comphy driver +------------------------------ + +This comphy controller can be found on Marvell Armada 38x. It provides a +number of shared PHYs used by various interfaces (network, sata, usb, +PCIe...). + +Required properties: + +- compatible: should be "marvell,armada-380-comphy" +- reg: should contain the comphy register location and length. +- #address-cells: should be 1. +- #size-cells: should be 0. + +A sub-node is required for each comphy lane provided by the comphy. + +Required properties (child nodes): + +- reg: comphy lane number. +- #phy-cells : from the generic phy bindings, must be 1. Defines the + input port to use for a given comphy lane. + +Example: + + comphy: phy@18300 { + compatible = "marvell,armada-380-comphy"; + reg = <0x18300 0x100>; + #address-cells = <1>; + #size-cells = <0>; + + cpm_comphy0: phy@0 { + reg = <0>; + #phy-cells = <1>; + }; + + cpm_comphy1: phy@1 { + reg = <1>; + #phy-cells = <1>; + }; + }; diff --git a/dts/Bindings/phy/phy-mvebu-comphy.txt b/dts/Bindings/phy/phy-mvebu-comphy.txt index bfcf803416..cf2cd86db2 100644 --- a/dts/Bindings/phy/phy-mvebu-comphy.txt +++ b/dts/Bindings/phy/phy-mvebu-comphy.txt @@ -1,16 +1,27 @@ -mvebu comphy driver -------------------- +MVEBU comphy drivers +-------------------- -A comphy controller can be found on Marvell Armada 7k/8k on the CP110. It -provides a number of shared PHYs used by various interfaces (network, sata, -usb, PCIe...). +COMPHY controllers can be found on the following Marvell MVEBU SoCs: +* Armada 7k/8k (on the CP110) +* Armada 3700 +It provides a number of shared PHYs used by various interfaces (network, SATA, +USB, PCIe...). Required properties: -- compatible: should be "marvell,comphy-cp110" -- reg: should contain the comphy register location and length. -- marvell,system-controller: should contain a phandle to the - system controller node. +- compatible: should be one of: + * "marvell,comphy-cp110" for Armada 7k/8k + * "marvell,comphy-a3700" for Armada 3700 +- reg: should contain the COMPHY register(s) location(s) and length(s). + * 1 entry for Armada 7k/8k + * 4 entries for Armada 3700 along with the corresponding reg-names + properties, memory areas are: + * Generic COMPHY registers + * Lane 1 (PCIe/GbE) + * Lane 0 (USB3/GbE) + * Lane 2 (SATA/USB3) +- marvell,system-controller: should contain a phandle to the system + controller node (only for Armada 7k/8k) - #address-cells: should be 1. - #size-cells: should be 0. @@ -18,11 +29,11 @@ A sub-node is required for each comphy lane provided by the comphy. Required properties (child nodes): -- reg: comphy lane number. -- #phy-cells : from the generic phy bindings, must be 1. Defines the +- reg: COMPHY lane number. +- #phy-cells : from the generic PHY bindings, must be 1. Defines the input port to use for a given comphy lane. -Example: +Examples: cpm_comphy: phy@120000 { compatible = "marvell,comphy-cp110"; @@ -41,3 +52,33 @@ Example: #phy-cells = <1>; }; }; + + comphy: phy@18300 { + compatible = "marvell,comphy-a3700"; + reg = <0x18300 0x300>, + <0x1F000 0x400>, + <0x5C000 0x400>, + <0xe0178 0x8>; + reg-names = "comphy", + "lane1_pcie_gbe", + "lane0_usb3_gbe", + "lane2_sata_usb3"; + #address-cells = <1>; + #size-cells = <0>; + + + comphy0: phy@0 { + reg = <0>; + #phy-cells = <1>; + }; + + comphy1: phy@1 { + reg = <1>; + #phy-cells = <1>; + }; + + comphy2: phy@2 { + reg = <2>; + #phy-cells = <1>; + }; + }; diff --git a/dts/Bindings/phy/phy-mvebu-utmi.txt b/dts/Bindings/phy/phy-mvebu-utmi.txt new file mode 100644 index 0000000000..aa99ceec73 --- /dev/null +++ b/dts/Bindings/phy/phy-mvebu-utmi.txt @@ -0,0 +1,38 @@ +MVEBU A3700 UTMI PHY +-------------------- + +USB2 UTMI+ PHY controllers can be found on the following Marvell MVEBU SoCs: +* Armada 3700 + +On Armada 3700, there are two USB controllers, one is compatible with the USB2 +and USB3 specifications and supports OTG. The other one is USB2 compliant and +only supports host mode. Both of these controllers come with a slightly +different UTMI PHY. + +Required Properties: + +- compatible: Should be one of: + * "marvell,a3700-utmi-host-phy" for the PHY connected to + the USB2 host-only controller. + * "marvell,a3700-utmi-otg-phy" for the PHY connected to + the USB3 and USB2 OTG capable controller. +- reg: PHY IP register range. +- marvell,usb-misc-reg: handle on the "USB miscellaneous registers" shared + region covering registers related to both the host + controller and the PHY. +- #phy-cells: Standard property (Documentation: phy-bindings.txt) Should be 0. + + +Example: + + usb2_utmi_host_phy: phy@5f000 { + compatible = "marvell,armada-3700-utmi-host-phy"; + reg = <0x5f000 0x800>; + marvell,usb-misc-reg = <&usb2_syscon>; + #phy-cells = <0>; + }; + + usb2_syscon: system-controller@5f800 { + compatible = "marvell,armada-3700-usb2-host-misc", "syscon"; + reg = <0x5f800 0x800>; + }; diff --git a/dts/Bindings/phy/phy-rockchip-inno-usb2.txt b/dts/Bindings/phy/phy-rockchip-inno-usb2.txt index 074a7b3b04..00639baae7 100644 --- a/dts/Bindings/phy/phy-rockchip-inno-usb2.txt +++ b/dts/Bindings/phy/phy-rockchip-inno-usb2.txt @@ -23,6 +23,8 @@ Optional properties: register files". When set driver will request its phandle as one companion-grf for some special SoCs (e.g RV1108). + - extcon : phandle to the extcon device providing the cable state for + the otg phy. Required nodes : a sub-node is required for each port the phy provides. The sub-node name is used to identify host or otg port, diff --git a/dts/Bindings/phy/qcom-qmp-phy.txt b/dts/Bindings/phy/qcom-qmp-phy.txt index 41a1074228..5d181fc3cc 100644 --- a/dts/Bindings/phy/qcom-qmp-phy.txt +++ b/dts/Bindings/phy/qcom-qmp-phy.txt @@ -9,6 +9,8 @@ Required properties: "qcom,ipq8074-qmp-pcie-phy" for PCIe phy on IPQ8074 "qcom,msm8996-qmp-pcie-phy" for 14nm PCIe phy on msm8996, "qcom,msm8996-qmp-usb3-phy" for 14nm USB3 phy on msm8996, + "qcom,msm8998-qmp-usb3-phy" for USB3 QMP V3 phy on msm8998, + "qcom,msm8998-qmp-ufs-phy" for UFS QMP phy on msm8998, "qcom,sdm845-qmp-usb3-phy" for USB3 QMP V3 phy on sdm845, "qcom,sdm845-qmp-usb3-uni-phy" for USB3 QMP V3 UNI phy on sdm845, "qcom,sdm845-qmp-ufs-phy" for UFS QMP phy on sdm845. @@ -42,6 +44,10 @@ Required properties: "aux", "cfg_ahb", "ref". For "qcom,msm8996-qmp-usb3-phy" must contain: "aux", "cfg_ahb", "ref". + For "qcom,msm8998-qmp-usb3-phy" must contain: + "aux", "cfg_ahb", "ref". + For "qcom,msm8998-qmp-ufs-phy" must contain: + "ref", "ref_aux". For "qcom,sdm845-qmp-usb3-phy" must contain: "aux", "cfg_ahb", "ref", "com_aux". For "qcom,sdm845-qmp-usb3-uni-phy" must contain: @@ -61,6 +67,9 @@ Required properties: "phy", "common", "cfg". For "qcom,msm8996-qmp-usb3-phy" must contain "phy", "common". + For "qcom,msm8998-qmp-usb3-phy" must contain + "phy", "common". + For "qcom,msm8998-qmp-ufs-phy": no resets are listed. For "qcom,sdm845-qmp-usb3-phy" must contain: "phy", "common". For "qcom,sdm845-qmp-usb3-uni-phy" must contain: diff --git a/dts/Bindings/phy/qcom-qusb2-phy.txt b/dts/Bindings/phy/qcom-qusb2-phy.txt index 03025d9799..fe29f9e0af 100644 --- a/dts/Bindings/phy/qcom-qusb2-phy.txt +++ b/dts/Bindings/phy/qcom-qusb2-phy.txt @@ -6,6 +6,7 @@ QUSB2 controller supports LS/FS/HS usb connectivity on Qualcomm chipsets. Required properties: - compatible: compatible list, contains "qcom,msm8996-qusb2-phy" for 14nm PHY on msm8996, + "qcom,msm8998-qusb2-phy" for 10nm PHY on msm8998, "qcom,sdm845-qusb2-phy" for 10nm PHY on sdm845. - reg: offset and length of the PHY register set. diff --git a/dts/Bindings/phy/rcar-gen3-phy-usb2.txt b/dts/Bindings/phy/rcar-gen3-phy-usb2.txt index de7b5393c1..ad9c290d8f 100644 --- a/dts/Bindings/phy/rcar-gen3-phy-usb2.txt +++ b/dts/Bindings/phy/rcar-gen3-phy-usb2.txt @@ -6,6 +6,8 @@ This file provides information on what the device node for the R-Car generation Required properties: - compatible: "renesas,usb2-phy-r8a774a1" if the device is a part of an R8A774A1 SoC. + "renesas,usb2-phy-r8a774c0" if the device is a part of an R8A774C0 + SoC. "renesas,usb2-phy-r8a7795" if the device is a part of an R8A7795 SoC. "renesas,usb2-phy-r8a7796" if the device is a part of an R8A7796 diff --git a/dts/Bindings/phy/ti-phy.txt b/dts/Bindings/phy/ti-phy.txt index 57dfda8a7a..8f93c3b694 100644 --- a/dts/Bindings/phy/ti-phy.txt +++ b/dts/Bindings/phy/ti-phy.txt @@ -35,6 +35,7 @@ Required properties: DRA7x Should be "ti,dra7x-usb2-phy2" for the 2nd instance of USB2 PHY in DRA7x + Should be "ti,am654-usb2" for the USB2 PHYs on AM654. - reg : Address and length of the register set for the device. - #phy-cells: determine the number of cells that should be given in the phandle while referencing this phy. diff --git a/dts/Bindings/pinctrl/atmel,at91-pinctrl.txt b/dts/Bindings/pinctrl/atmel,at91-pinctrl.txt index 3e23fece99..eb39f50511 100644 --- a/dts/Bindings/pinctrl/atmel,at91-pinctrl.txt +++ b/dts/Bindings/pinctrl/atmel,at91-pinctrl.txt @@ -19,7 +19,7 @@ such as pull-up, multi drive, etc. Required properties for iomux controller: - compatible: "atmel,at91rm9200-pinctrl" or "atmel,at91sam9x5-pinctrl" - or "atmel,sama5d3-pinctrl" + or "atmel,sama5d3-pinctrl" or "microchip,sam9x60-pinctrl" - atmel,mux-mask: array of mask (periph per bank) to describe if a pin can be configured in this periph mode. All the periph and bank need to be describe. @@ -100,6 +100,7 @@ DRIVE_STRENGTH (3 << 5): indicate the drive strength of the pin using the 11 - High OUTPUT (1 << 7): indicate this pin need to be configured as an output. OUTPUT_VAL (1 << 8): output val (1 = high, 0 = low) +SLEWRATE (1 << 9): slew rate of the pin: 0 = disable, 1 = enable DEBOUNCE (1 << 16): indicate this pin needs debounce. DEBOUNCE_VAL (0x3fff << 17): debounce value. @@ -116,6 +117,19 @@ Some requirements for using atmel,at91rm9200-pinctrl binding: configurations by referring to the phandle of that pin configuration node. 4. The gpio controller must be describe in the pinctrl simple-bus. +For each bank the required properties are: +- compatible: "atmel,at91sam9x5-gpio" or "atmel,at91rm9200-gpio" or + "microchip,sam9x60-gpio" +- reg: physical base address and length of the controller's registers +- interrupts: interrupt outputs from the controller +- interrupt-controller: marks the device node as an interrupt controller +- #interrupt-cells: should be 2; refer to ../interrupt-controller/interrupts.txt + for more details. +- gpio-controller +- #gpio-cells: should be 2; the first cell is the GPIO number and the second + cell specifies GPIO flags as defined in <dt-bindings/gpio/gpio.h>. +- clocks: bank clock + Examples: pinctrl@fffff400 { @@ -125,6 +139,17 @@ pinctrl@fffff400 { compatible = "atmel,at91rm9200-pinctrl", "simple-bus"; reg = <0xfffff400 0x600>; + pioA: gpio@fffff400 { + compatible = "atmel,at91sam9x5-gpio"; + reg = <0xfffff400 0x200>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 2>; + }; + atmel,mux-mask = < /* A B */ 0xffffffff 0xffc00c3b /* pioA */ diff --git a/dts/Bindings/pinctrl/fsl,imx50-pinctrl.txt b/dts/Bindings/pinctrl/fsl,imx50-pinctrl.txt new file mode 100644 index 0000000000..6da01d619d --- /dev/null +++ b/dts/Bindings/pinctrl/fsl,imx50-pinctrl.txt @@ -0,0 +1,32 @@ +* Freescale IMX50 IOMUX Controller + +Please refer to fsl,imx-pinctrl.txt in this directory for common binding part +and usage. + +Required properties: +- compatible: "fsl,imx50-iomuxc" +- fsl,pins: two integers array, represents a group of pins mux and config + setting. The format is fsl,pins = <PIN_FUNC_ID CONFIG>, PIN_FUNC_ID is a + pin working on a specific function, CONFIG is the pad setting value like + pull-up for this pin. Please refer to imx50 datasheet for the valid pad + config settings. + +CONFIG bits definition: +PAD_CTL_HVE (1 << 13) +PAD_CTL_HYS (1 << 8) +PAD_CTL_PKE (1 << 7) +PAD_CTL_PUE (1 << 6) +PAD_CTL_PUS_100K_DOWN (0 << 4) +PAD_CTL_PUS_47K_UP (1 << 4) +PAD_CTL_PUS_100K_UP (2 << 4) +PAD_CTL_PUS_22K_UP (3 << 4) +PAD_CTL_ODE (1 << 3) +PAD_CTL_DSE_LOW (0 << 1) +PAD_CTL_DSE_MED (1 << 1) +PAD_CTL_DSE_HIGH (2 << 1) +PAD_CTL_DSE_MAX (3 << 1) +PAD_CTL_SRE_FAST (1 << 0) +PAD_CTL_SRE_SLOW (0 << 0) + +Refer to imx50-pinfunc.h in device tree source folder for all available +imx50 PIN_FUNC_ID. diff --git a/dts/Bindings/pinctrl/fsl,imx8mm-pinctrl.txt b/dts/Bindings/pinctrl/fsl,imx8mm-pinctrl.txt new file mode 100644 index 0000000000..524a16fca6 --- /dev/null +++ b/dts/Bindings/pinctrl/fsl,imx8mm-pinctrl.txt @@ -0,0 +1,36 @@ +* Freescale IMX8MM IOMUX Controller + +Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory +for common binding part and usage. + +Required properties: +- compatible: "fsl,imx8mm-iomuxc" +- reg: should contain the base physical address and size of the iomuxc + registers. + +Required properties in sub-nodes: +- fsl,pins: each entry consists of 6 integers and represents the mux and config + setting for one pin. The first 5 integers <mux_reg conf_reg input_reg mux_val + input_val> are specified using a PIN_FUNC_ID macro, which can be found in + <dt-bindings/pinctrl/imx8mm-pinfunc.h>. The last integer CONFIG is + the pad setting value like pull-up on this pin. Please refer to i.MX8M Mini + Reference Manual for detailed CONFIG settings. + +Examples: + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; +}; + +iomuxc: pinctrl@30330000 { + compatible = "fsl,imx8mm-iomuxc"; + reg = <0x0 0x30330000 0x0 0x10000>; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX 0x140 + MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX 0x140 + >; + }; +}; diff --git a/dts/Bindings/pinctrl/marvell,armada-37xx-pinctrl.txt b/dts/Bindings/pinctrl/marvell,armada-37xx-pinctrl.txt index c7c088d2dd..38dc56a577 100644 --- a/dts/Bindings/pinctrl/marvell,armada-37xx-pinctrl.txt +++ b/dts/Bindings/pinctrl/marvell,armada-37xx-pinctrl.txt @@ -58,11 +58,11 @@ group pwm3 - functions pwm, gpio group pmic1 - - pin 17 + - pin 7 - functions pmic, gpio group pmic0 - - pin 16 + - pin 6 - functions pmic, gpio group i2c2 @@ -112,19 +112,31 @@ group usb2_drvvbus1 - functions drvbus, gpio group sdio_sb - - pins 60-64 + - pins 60-65 - functions sdio, gpio group rgmii - - pins 42-55 + - pins 42-53 - functions mii, gpio group pcie1 - - pins 39-40 + - pins 39 + - functions pcie, gpio + +group pcie1_clkreq + - pins 40 - functions pcie, gpio +group pcie1_wakeup + - pins 41 + - functions pcie, gpio + +group smi + - pins 54-55 + - functions smi, gpio + group ptp - - pins 56-58 + - pins 56 - functions ptp, gpio group ptp_clk diff --git a/dts/Bindings/pinctrl/meson,pinctrl.txt b/dts/Bindings/pinctrl/meson,pinctrl.txt index 82ead40311..a47dd990a8 100644 --- a/dts/Bindings/pinctrl/meson,pinctrl.txt +++ b/dts/Bindings/pinctrl/meson,pinctrl.txt @@ -23,11 +23,11 @@ The GPIO bank for the controller is represented as a sub-node and it acts as a GPIO controller. Required properties for sub-nodes are: - - reg: should contain address and size for mux, pull-enable, pull and - gpio register sets - - reg-names: an array of strings describing the "reg" entries. Must - contain "mux", "pull" and "gpio". "pull-enable" is optional and - when it is missing the "pull" registers are used instead + - reg: should contain a list of address and size, one tuple for each entry + in reg-names. + - reg-names: an array of strings describing the "reg" entries. + Must contain "mux" and "gpio". + May contain "pull", "pull-enable" and "ds" when appropriate. - gpio-controller: identifies the node as a gpio controller - #gpio-cells: must be 2 diff --git a/dts/Bindings/pinctrl/qcom,pmic-gpio.txt b/dts/Bindings/pinctrl/qcom,pmic-gpio.txt index 759aa1732e..7f64a7e92c 100644 --- a/dts/Bindings/pinctrl/qcom,pmic-gpio.txt +++ b/dts/Bindings/pinctrl/qcom,pmic-gpio.txt @@ -19,6 +19,7 @@ PMIC's from Qualcomm. "qcom,pm8998-gpio" "qcom,pma8084-gpio" "qcom,pmi8994-gpio" + "qcom,pmi8998-gpio" "qcom,pms405-gpio" And must contain either "qcom,spmi-gpio" or "qcom,ssbi-gpio" diff --git a/dts/Bindings/power/fsl,imx-gpcv2.txt b/dts/Bindings/power/fsl,imx-gpcv2.txt index 7c947a996d..7c7e972aaa 100644 --- a/dts/Bindings/power/fsl,imx-gpcv2.txt +++ b/dts/Bindings/power/fsl,imx-gpcv2.txt @@ -32,6 +32,9 @@ Required properties: Optional properties: - power-supply: Power supply used to power the domain +- clocks: a number of phandles to clocks that need to be enabled during + domain power-up sequencing to ensure reset propagation into devices + located inside this power domain Example: diff --git a/dts/Bindings/power/qcom,rpmpd.txt b/dts/Bindings/power/qcom,rpmpd.txt new file mode 100644 index 0000000000..980e5413d1 --- /dev/null +++ b/dts/Bindings/power/qcom,rpmpd.txt @@ -0,0 +1,145 @@ +Qualcomm RPM/RPMh Power domains + +For RPM/RPMh Power domains, we communicate a performance state to RPM/RPMh +which then translates it into a corresponding voltage on a rail + +Required Properties: + - compatible: Should be one of the following + * qcom,msm8996-rpmpd: RPM Power domain for the msm8996 family of SoC + * qcom,sdm845-rpmhpd: RPMh Power domain for the sdm845 family of SoC + - #power-domain-cells: number of cells in Power domain specifier + must be 1. + - operating-points-v2: Phandle to the OPP table for the Power domain. + Refer to Documentation/devicetree/bindings/power/power_domain.txt + and Documentation/devicetree/bindings/opp/opp.txt for more details + +Refer to <dt-bindings/power/qcom-rpmpd.h> for the level values for +various OPPs for different platforms as well as Power domain indexes + +Example: rpmh power domain controller and OPP table + +#include <dt-bindings/power/qcom-rpmhpd.h> + +opp-level values specified in the OPP tables for RPMh power domains +should use the RPMH_REGULATOR_LEVEL_* constants from +<dt-bindings/power/qcom-rpmhpd.h> + + rpmhpd: power-controller { + compatible = "qcom,sdm845-rpmhpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmhpd_opp_table>; + + rpmhpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmhpd_opp_ret: opp1 { + opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>; + }; + + rpmhpd_opp_min_svs: opp2 { + opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; + }; + + rpmhpd_opp_low_svs: opp3 { + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + }; + + rpmhpd_opp_svs: opp4 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + }; + + rpmhpd_opp_svs_l1: opp5 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + }; + + rpmhpd_opp_nom: opp6 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM>; + }; + + rpmhpd_opp_nom_l1: opp7 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; + }; + + rpmhpd_opp_nom_l2: opp8 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>; + }; + + rpmhpd_opp_turbo: opp9 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; + }; + + rpmhpd_opp_turbo_l1: opp10 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>; + }; + }; + }; + +Example: rpm power domain controller and OPP table + + rpmpd: power-controller { + compatible = "qcom,msm8996-rpmpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmpd_opp_table>; + + rpmpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmpd_opp_low: opp1 { + opp-level = <1>; + }; + + rpmpd_opp_ret: opp2 { + opp-level = <2>; + }; + + rpmpd_opp_svs: opp3 { + opp-level = <3>; + }; + + rpmpd_opp_normal: opp4 { + opp-level = <4>; + }; + + rpmpd_opp_high: opp5 { + opp-level = <5>; + }; + + rpmpd_opp_turbo: opp6 { + opp-level = <6>; + }; + }; + }; + +Example: Client/Consumer device using OPP table + + leaky-device0@12350000 { + compatible = "foo,i-leak-current"; + reg = <0x12350000 0x1000>; + power-domains = <&rpmhpd SDM845_MX>; + operating-points-v2 = <&leaky_opp_table>; + }; + + + leaky_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp1 { + opp-hz = /bits/ 64 <144000>; + required-opps = <&rpmhpd_opp_low>; + }; + + opp2 { + opp-hz = /bits/ 64 <400000>; + required-opps = <&rpmhpd_opp_ret>; + }; + + opp3 { + opp-hz = /bits/ 64 <20000000>; + required-opps = <&rpmpd_opp_svs>; + }; + + opp4 { + opp-hz = /bits/ 64 <25000000>; + required-opps = <&rpmpd_opp_normal>; + }; + }; diff --git a/dts/Bindings/power/reset/xlnx,zynqmp-power.txt b/dts/Bindings/power/reset/xlnx,zynqmp-power.txt new file mode 100644 index 0000000000..d366f1eb62 --- /dev/null +++ b/dts/Bindings/power/reset/xlnx,zynqmp-power.txt @@ -0,0 +1,25 @@ +-------------------------------------------------------------------- +Device Tree Bindings for the Xilinx Zynq MPSoC Power Management +-------------------------------------------------------------------- +The zynqmp-power node describes the power management configurations. +It will control remote suspend/shutdown interfaces. + +Required properties: + - compatible: Must contain: "xlnx,zynqmp-power" + - interrupts: Interrupt specifier + +------- +Example +------- + +firmware { + zynqmp_firmware: zynqmp-firmware { + compatible = "xlnx,zynqmp-firmware"; + method = "smc"; + + zynqmp_power: zynqmp-power { + compatible = "xlnx,zynqmp-power"; + interrupts = <0 35 4>; + }; + }; +}; diff --git a/dts/Bindings/power/supply/battery.txt b/dts/Bindings/power/supply/battery.txt index 89871ab8c7..5c913d4cf3 100644 --- a/dts/Bindings/power/supply/battery.txt +++ b/dts/Bindings/power/supply/battery.txt @@ -16,6 +16,7 @@ Required Properties: Optional Properties: - voltage-min-design-microvolt: drained battery voltage + - voltage-max-design-microvolt: fully charged battery voltage - energy-full-design-microwatt-hours: battery design energy - charge-full-design-microamp-hours: battery design capacity - precharge-current-microamp: current for pre-charge phase @@ -48,6 +49,7 @@ Example: bat: battery { compatible = "simple-battery"; voltage-min-design-microvolt = <3200000>; + voltage-max-design-microvolt = <4200000>; energy-full-design-microwatt-hours = <5290000>; charge-full-design-microamp-hours = <1430000>; precharge-current-microamp = <256000>; diff --git a/dts/Bindings/power/supply/sc27xx-fg.txt b/dts/Bindings/power/supply/sc27xx-fg.txt index fc35ac5774..0a5705b8b5 100644 --- a/dts/Bindings/power/supply/sc27xx-fg.txt +++ b/dts/Bindings/power/supply/sc27xx-fg.txt @@ -9,8 +9,8 @@ Required properties: "sprd,sc2731-fgu". - reg: The address offset of fuel gauge unit. - battery-detect-gpios: GPIO for battery detection. -- io-channels: Specify the IIO ADC channel to get temperature. -- io-channel-names: Should be "bat-temp". +- io-channels: Specify the IIO ADC channels to get temperature and charge voltage. +- io-channel-names: Should be "bat-temp" or "charge-vol". - nvmem-cells: A phandle to the calibration cells provided by eFuse device. - nvmem-cell-names: Should be "fgu_calib". - monitored-battery: Phandle of battery characteristics devicetree node. @@ -47,8 +47,8 @@ Example: compatible = "sprd,sc2731-fgu"; reg = <0xa00>; battery-detect-gpios = <&pmic_eic 9 GPIO_ACTIVE_HIGH>; - io-channels = <&pmic_adc 5>; - io-channel-names = "bat-temp"; + io-channels = <&pmic_adc 5>, <&pmic_adc 14>; + io-channel-names = "bat-temp", "charge-vol"; nvmem-cells = <&fgu_calib>; nvmem-cell-names = "fgu_calib"; monitored-battery = <&bat>; diff --git a/dts/Bindings/power/xlnx,zynqmp-genpd.txt b/dts/Bindings/power/xlnx,zynqmp-genpd.txt new file mode 100644 index 0000000000..8d1b8200eb --- /dev/null +++ b/dts/Bindings/power/xlnx,zynqmp-genpd.txt @@ -0,0 +1,34 @@ +----------------------------------------------------------- +Device Tree Bindings for the Xilinx Zynq MPSoC PM domains +----------------------------------------------------------- +The binding for zynqmp-power-controller follow the common +generic PM domain binding[1]. + +[1] Documentation/devicetree/bindings/power/power_domain.txt + +== Zynq MPSoC Generic PM Domain Node == + +Required property: + - Below property should be in zynqmp-firmware node. + - #power-domain-cells: Number of cells in a PM domain specifier. Must be 1. + +Power domain ID indexes are mentioned in +include/dt-bindings/power/xlnx-zynqmp-power.h. + +------- +Example +------- + +firmware { + zynqmp_firmware: zynqmp-firmware { + ... + #power-domain-cells = <1>; + ... + }; +}; + +sata { + ... + power-domains = <&zynqmp_firmware 28>; + ... +}; diff --git a/dts/Bindings/property-units.txt b/dts/Bindings/property-units.txt index 45ce054d84..bfd33734fa 100644 --- a/dts/Bindings/property-units.txt +++ b/dts/Bindings/property-units.txt @@ -31,6 +31,7 @@ Electricity -microwatt-hours: micro Watt-hours -microvolt : micro volts -picofarads : picofarads +-femtofarads : femtofarads Temperature ---------------------------------------- diff --git a/dts/Bindings/ptp/ptp-qoriq.txt b/dts/Bindings/ptp/ptp-qoriq.txt index c5d0e7998e..454c937076 100644 --- a/dts/Bindings/ptp/ptp-qoriq.txt +++ b/dts/Bindings/ptp/ptp-qoriq.txt @@ -17,6 +17,11 @@ Clock Properties: - fsl,tmr-fiper1 Fixed interval period pulse generator. - fsl,tmr-fiper2 Fixed interval period pulse generator. - fsl,max-adj Maximum frequency adjustment in parts per billion. + - fsl,extts-fifo The presence of this property indicates hardware + support for the external trigger stamp FIFO. + - little-endian The presence of this property indicates the 1588 timer + IP block is little-endian mode. The default endian mode + is big-endian. These properties set the operational parameters for the PTP clock. You must choose these carefully for the clock to work right. diff --git a/dts/Bindings/pwm/atmel-pwm.txt b/dts/Bindings/pwm/atmel-pwm.txt index c8c831d7b0..591ecdd39c 100644 --- a/dts/Bindings/pwm/atmel-pwm.txt +++ b/dts/Bindings/pwm/atmel-pwm.txt @@ -5,6 +5,7 @@ Required properties: - "atmel,at91sam9rl-pwm" - "atmel,sama5d3-pwm" - "atmel,sama5d2-pwm" + - "microchip,sam9x60-pwm" - reg: physical base address and length of the controller's registers - #pwm-cells: Should be 3. See pwm.txt in this directory for a description of the cells format. diff --git a/dts/Bindings/pwm/pwm-hibvt.txt b/dts/Bindings/pwm/pwm-hibvt.txt index fa7849d678..daedfef09b 100644 --- a/dts/Bindings/pwm/pwm-hibvt.txt +++ b/dts/Bindings/pwm/pwm-hibvt.txt @@ -5,6 +5,8 @@ Required properties: The SoC specific strings supported including: "hisilicon,hi3516cv300-pwm" "hisilicon,hi3519v100-pwm" + "hisilicon,hi3559v100-shub-pwm" + "hisilicon,hi3559v100-pwm - reg: physical base address and length of the controller's registers. - clocks: phandle and clock specifier of the PWM reference clock. - resets: phandle and reset specifier for the PWM controller reset. diff --git a/dts/Bindings/regulator/fan53555.txt b/dts/Bindings/regulator/fan53555.txt index 54a3f2c80e..e7fc045281 100644 --- a/dts/Bindings/regulator/fan53555.txt +++ b/dts/Bindings/regulator/fan53555.txt @@ -1,7 +1,8 @@ Binding for Fairchild FAN53555 regulators Required properties: - - compatible: one of "fcs,fan53555", "silergy,syr827", "silergy,syr828" + - compatible: one of "fcs,fan53555", "fcs,fan53526", "silergy,syr827" or + "silergy,syr828" - reg: I2C address Optional properties: diff --git a/dts/Bindings/regulator/fixed-regulator.txt b/dts/Bindings/regulator/fixed-regulator.txt deleted file mode 100644 index 0c2a6c8a15..0000000000 --- a/dts/Bindings/regulator/fixed-regulator.txt +++ /dev/null @@ -1,35 +0,0 @@ -Fixed Voltage regulators - -Required properties: -- compatible: Must be "regulator-fixed"; -- regulator-name: Defined in regulator.txt as optional, but required here. - -Optional properties: -- gpio: gpio to use for enable control -- startup-delay-us: startup time in microseconds -- enable-active-high: Polarity of GPIO is Active high -If this property is missing, the default assumed is Active low. -- gpio-open-drain: GPIO is open drain type. - If this property is missing then default assumption is false. --vin-supply: Input supply name. - -Any property defined as part of the core regulator -binding, defined in regulator.txt, can also be used. -However a fixed voltage regulator is expected to have the -regulator-min-microvolt and regulator-max-microvolt -to be the same. - -Example: - - abc: fixedregulator@0 { - compatible = "regulator-fixed"; - regulator-name = "fixed-supply"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - gpio = <&gpio1 16 0>; - startup-delay-us = <70000>; - enable-active-high; - regulator-boot-on; - gpio-open-drain; - vin-supply = <&parent_reg>; - }; diff --git a/dts/Bindings/regulator/fixed-regulator.yaml b/dts/Bindings/regulator/fixed-regulator.yaml new file mode 100644 index 0000000000..d289c2f745 --- /dev/null +++ b/dts/Bindings/regulator/fixed-regulator.yaml @@ -0,0 +1,67 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/fixed-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Fixed Voltage regulators + +maintainers: + - Liam Girdwood <lgirdwood@gmail.com> + - Mark Brown <broonie@kernel.org> + +description: + Any property defined as part of the core regulator binding, defined in + regulator.txt, can also be used. However a fixed voltage regulator is + expected to have the regulator-min-microvolt and regulator-max-microvolt + to be the same. + +properties: + compatible: + const: regulator-fixed + + regulator-name: true + + gpio: + description: gpio to use for enable control + maxItems: 1 + + startup-delay-us: + description: startup time in microseconds + $ref: /schemas/types.yaml#/definitions/uint32 + + enable-active-high: + description: + Polarity of GPIO is Active high. If this property is missing, + the default assumed is Active low. + type: boolean + + gpio-open-drain: + description: + GPIO is open drain type. If this property is missing then default + assumption is false. + type: boolean + + vin-supply: + description: Input supply phandle. + $ref: /schemas/types.yaml#/definitions/phandle + +required: + - compatible + - regulator-name + +examples: + - | + reg_1v8: regulator-1v8 { + compatible = "regulator-fixed"; + regulator-name = "1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio1 16 0>; + startup-delay-us = <70000>; + enable-active-high; + regulator-boot-on; + gpio-open-drain; + vin-supply = <&parent_reg>; + }; +... diff --git a/dts/Bindings/regulator/max77650-regulator.txt b/dts/Bindings/regulator/max77650-regulator.txt new file mode 100644 index 0000000000..f1cbe813c3 --- /dev/null +++ b/dts/Bindings/regulator/max77650-regulator.txt @@ -0,0 +1,41 @@ +Regulator driver for MAX77650 PMIC from Maxim Integrated. + +This module is part of the MAX77650 MFD device. For more details +see Documentation/devicetree/bindings/mfd/max77650.txt. + +The regulator controller is represented as a sub-node of the PMIC node +on the device tree. + +The device has a single LDO regulator and a SIMO buck-boost regulator with +three independent power rails. + +Required properties: +-------------------- +- compatible: Must be "maxim,max77650-regulator" + +Each rail must be instantiated under the regulators subnode of the top PMIC +node. Up to four regulators can be defined. For standard regulator properties +refer to Documentation/devicetree/bindings/regulator/regulator.txt. + +Available regulator compatible strings are: "ldo", "sbb0", "sbb1", "sbb2". + +Example: +-------- + + regulators { + compatible = "maxim,max77650-regulator"; + + max77650_ldo: regulator@0 { + regulator-compatible = "ldo"; + regulator-name = "max77650-ldo"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <2937500>; + }; + + max77650_sbb0: regulator@1 { + regulator-compatible = "sbb0"; + regulator-name = "max77650-sbb0"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1587500>; + }; + }; diff --git a/dts/Bindings/regulator/pfuze100.txt b/dts/Bindings/regulator/pfuze100.txt index f9be1acf89..4d3b12b92c 100644 --- a/dts/Bindings/regulator/pfuze100.txt +++ b/dts/Bindings/regulator/pfuze100.txt @@ -8,7 +8,7 @@ Optional properties: - fsl,pfuze-support-disable-sw: Boolean, if present disable all unused switch regulators to save power consumption. Attention, ensure that all important regulators (e.g. DDR ref, DDR supply) has set the "regulator-always-on" - property. If not present, the switched regualtors are always on and can't be + property. If not present, the switched regulators are always on and can't be disabled. This binding is a workaround to keep backward compatibility with old dtb's which rely on the fact that the switched regulators are always on and don't mark them explicit as "regulator-always-on". diff --git a/dts/Bindings/regulator/rohm,bd70528-regulator.txt b/dts/Bindings/regulator/rohm,bd70528-regulator.txt new file mode 100644 index 0000000000..698cfc3bc3 --- /dev/null +++ b/dts/Bindings/regulator/rohm,bd70528-regulator.txt @@ -0,0 +1,68 @@ +ROHM BD70528 Power Management Integrated Circuit regulator bindings + +Required properties: + - regulator-name: should be "buck1", "buck2", "buck3", "ldo1", "ldo2", "ldo3", + "led_ldo1", "led_ldo2" + +List of regulators provided by this controller. BD70528 regulators node +should be sub node of the BD70528 MFD node. See BD70528 MFD bindings at +Documentation/devicetree/bindings/mfd/rohm,bd70528-pmic.txt + +The valid names for BD70528 regulator nodes are: +BUCK1, BUCK2, BUCK3, LDO1, LDO2, LDO3, LED_LDO1, LED_LDO2 + +Optional properties: +- Any optional property defined in bindings/regulator/regulator.txt + +Example: +regulators { + buck1: BUCK1 { + regulator-name = "buck1"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3400000>; + regulator-boot-on; + regulator-ramp-delay = <125>; + }; + buck2: BUCK2 { + regulator-name = "buck2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-ramp-delay = <125>; + }; + buck3: BUCK3 { + regulator-name = "buck3"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-ramp-delay = <250>; + }; + ldo1: LDO1 { + regulator-name = "ldo1"; + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + ldo2: LDO2 { + regulator-name = "ldo2"; + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + + ldo3: LDO3 { + regulator-name = "ldo3"; + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <3300000>; + }; + led_ldo1: LED_LDO1 { + regulator-name = "led_ldo1"; + regulator-min-microvolt = <200000>; + regulator-max-microvolt = <300000>; + }; + led_ldo2: LED_LDO2 { + regulator-name = "led_ldo2"; + regulator-min-microvolt = <200000>; + regulator-max-microvolt = <300000>; + }; +}; diff --git a/dts/Bindings/regulator/rohm,bd71837-regulator.txt b/dts/Bindings/regulator/rohm,bd71837-regulator.txt index 4b98ca26e6..cbce62c22b 100644 --- a/dts/Bindings/regulator/rohm,bd71837-regulator.txt +++ b/dts/Bindings/regulator/rohm,bd71837-regulator.txt @@ -27,8 +27,38 @@ BUCK1, BUCK2, BUCK3, BUCK4, BUCK5, BUCK6 LDO1, LDO2, LDO3, LDO4, LDO5, LDO6 Optional properties: +- rohm,dvs-run-voltage : PMIC default "RUN" state voltage in uV. + See below table for bucks which support this. +- rohm,dvs-idle-voltage : PMIC default "IDLE" state voltage in uV. + See below table for bucks which support this. +- rohm,dvs-suspend-voltage : PMIC default "SUSPEND" state voltage in uV. + See below table for bucks which support this. - Any optional property defined in bindings/regulator/regulator.txt +Supported default DVS states: + +BD71837: +buck | dvs-run-voltage | dvs-idle-voltage | dvs-suspend-voltage +----------------------------------------------------------------------------- +1 | supported | supported | supported +---------------------------------------------------------------------------- +2 | supported | supported | not supported +---------------------------------------------------------------------------- +3 | supported | not supported | not supported +---------------------------------------------------------------------------- +4 | supported | not supported | not supported +---------------------------------------------------------------------------- +rest | not supported | not supported | not supported + +BD71847: +buck | dvs-run-voltage | dvs-idle-voltage | dvs-suspend-voltage +----------------------------------------------------------------------------- +1 | supported | supported | supported +---------------------------------------------------------------------------- +2 | supported | supported | not supported +---------------------------------------------------------------------------- +rest | not supported | not supported | not supported + Example: regulators { buck1: BUCK1 { @@ -36,7 +66,11 @@ regulators { regulator-min-microvolt = <700000>; regulator-max-microvolt = <1300000>; regulator-boot-on; + regulator-always-on; regulator-ramp-delay = <1250>; + rohm,dvs-run-voltage = <900000>; + rohm,dvs-idle-voltage = <850000>; + rohm,dvs-suspend-voltage = <800000>; }; buck2: BUCK2 { regulator-name = "buck2"; @@ -45,18 +79,22 @@ regulators { regulator-boot-on; regulator-always-on; regulator-ramp-delay = <1250>; + rohm,dvs-run-voltage = <1000000>; + rohm,dvs-idle-voltage = <900000>; }; buck3: BUCK3 { regulator-name = "buck3"; regulator-min-microvolt = <700000>; regulator-max-microvolt = <1300000>; regulator-boot-on; + rohm,dvs-run-voltage = <1000000>; }; buck4: BUCK4 { regulator-name = "buck4"; regulator-min-microvolt = <700000>; regulator-max-microvolt = <1300000>; regulator-boot-on; + rohm,dvs-run-voltage = <1000000>; }; buck5: BUCK5 { regulator-name = "buck5"; diff --git a/dts/Bindings/regulator/st,stpmic1-regulator.txt b/dts/Bindings/regulator/st,stpmic1-regulator.txt index a3f4762405..6189df71ea 100644 --- a/dts/Bindings/regulator/st,stpmic1-regulator.txt +++ b/dts/Bindings/regulator/st,stpmic1-regulator.txt @@ -23,16 +23,14 @@ Switches are fixed voltage regulators with only enable/disable capability. Optional properties: - st,mask-reset: mask reset for this regulator: the regulator configuration is maintained during pmic reset. -- regulator-pull-down: enable high pull down - if not specified light pull down is used - regulator-over-current-protection: if set, all regulators are switched off in case of over-current detection on this regulator, if not set, the driver only sends an over-current event. -- interrupt-parent: phandle to the parent interrupt controller - interrupts: index of current limit detection interrupt - <regulator>-supply: phandle to the parent supply/regulator node each regulator supply can be described except vref_ddr. +- regulator-active-discharge: can be used on pwr_sw1 and pwr_sw2. Example: regulators { @@ -43,7 +41,6 @@ regulators { vdd_core: buck1 { regulator-name = "vdd_core"; interrupts = <IT_CURLIM_BUCK1 0>; - interrupt-parent = <&pmic>; st,mask-reset; regulator-pull-down; regulator-min-microvolt = <700000>; @@ -53,7 +50,6 @@ regulators { v3v3: buck4 { regulator-name = "v3v3"; interrupts = <IT_CURLIM_BUCK4 0>; - interrupt-parent = <&mypmic>; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; diff --git a/dts/Bindings/regulator/tps65218.txt b/dts/Bindings/regulator/tps65218.txt index 02f0e9bbfb..54aded3b78 100644 --- a/dts/Bindings/regulator/tps65218.txt +++ b/dts/Bindings/regulator/tps65218.txt @@ -71,8 +71,13 @@ tps65218: tps65218@24 { regulator-always-on; }; + ls2: regulator-ls2 { + regulator-min-microamp = <100000>; + regulator-max-microamp = <1000000>; + }; + ls3: regulator-ls3 { - regulator-min-microvolt = <100000>; - regulator-max-microvolt = <1000000>; + regulator-min-microamp = <100000>; + regulator-max-microamp = <1000000>; }; }; diff --git a/dts/Bindings/remoteproc/qcom,adsp-pil.txt b/dts/Bindings/remoteproc/qcom,adsp-pil.txt index a842a782b5..66af2c3094 100644 --- a/dts/Bindings/remoteproc/qcom,adsp-pil.txt +++ b/dts/Bindings/remoteproc/qcom,adsp-pil.txt @@ -35,7 +35,7 @@ on the Qualcomm Technology Inc. ADSP Hexagon core. Value type: <stringlist> Definition: List of clock input name strings sorted in the same order as the clocks property. Definition must have - "xo", "sway_cbcr", "lpass_aon", "lpass_ahbs_aon_cbcr", + "xo", "sway_cbcr", "lpass_ahbs_aon_cbcr", "lpass_ahbm_aon_cbcr", "qdsp6ss_xo", "qdsp6ss_sleep" and "qdsp6ss_core". @@ -100,13 +100,12 @@ ADSP, as it is found on SDM845 boards. clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_LPASS_SWAY_CLK>, - <&lpasscc LPASS_AUDIO_WRAPPER_AON_CLK>, <&lpasscc LPASS_Q6SS_AHBS_AON_CLK>, <&lpasscc LPASS_Q6SS_AHBM_AON_CLK>, <&lpasscc LPASS_QDSP6SS_XO_CLK>, <&lpasscc LPASS_QDSP6SS_SLEEP_CLK>, <&lpasscc LPASS_QDSP6SS_CORE_CLK>; - clock-names = "xo", "sway_cbcr", "lpass_aon", + clock-names = "xo", "sway_cbcr", "lpass_ahbs_aon_cbcr", "lpass_ahbm_aon_cbcr", "qdsp6ss_xo", "qdsp6ss_sleep", "qdsp6ss_core"; diff --git a/dts/Bindings/remoteproc/qcom,adsp.txt b/dts/Bindings/remoteproc/qcom,adsp.txt index 9c0cff3a5e..292dfda977 100644 --- a/dts/Bindings/remoteproc/qcom,adsp.txt +++ b/dts/Bindings/remoteproc/qcom,adsp.txt @@ -19,13 +19,30 @@ on the Qualcomm ADSP Hexagon core. - interrupts-extended: Usage: required Value type: <prop-encoded-array> - Definition: must list the watchdog, fatal IRQs ready, handover and - stop-ack IRQs + Definition: reference to the interrupts that match interrupt-names - interrupt-names: Usage: required Value type: <stringlist> - Definition: must be "wdog", "fatal", "ready", "handover", "stop-ack" + Definition: The interrupts needed depends on the compatible + string: + qcom,msm8974-adsp-pil: + qcom,msm8996-adsp-pil: + qcom,msm8996-slpi-pil: + qcom,qcs404-adsp-pas: + qcom,qcs404-cdsp-pas: + qcom,sdm845-adsp-pas: + qcom,sdm845-cdsp-pas: + must be "wdog", "fatal", "ready", "handover", "stop-ack" + qcom,qcs404-wcss-pas: + must be "wdog", "fatal", "ready", "handover", "stop-ack", + "shutdown-ack" + +- firmware-name: + Usage: optional + Value type: <string> + Definition: must list the relative firmware image path for the + Hexagon Core. - clocks: Usage: required diff --git a/dts/Bindings/remoteproc/qcom,q6v5.txt b/dts/Bindings/remoteproc/qcom,q6v5.txt index 9ff5b03094..41ca5df5be 100644 --- a/dts/Bindings/remoteproc/qcom,q6v5.txt +++ b/dts/Bindings/remoteproc/qcom,q6v5.txt @@ -28,24 +28,51 @@ on the Qualcomm Hexagon core. - interrupts-extended: Usage: required Value type: <prop-encoded-array> - Definition: must list the watchdog, fatal IRQs ready, handover and - stop-ack IRQs + Definition: reference to the interrupts that match interrupt-names - interrupt-names: Usage: required Value type: <stringlist> - Definition: must be "wdog", "fatal", "ready", "handover", "stop-ack" + Definition: The interrupts needed depends on the the compatible + string: + qcom,q6v5-pil: + qcom,ipq8074-wcss-pil: + qcom,msm8916-mss-pil: + qcom,msm8974-mss-pil: + must be "wdog", "fatal", "ready", "handover", "stop-ack" + qcom,msm8996-mss-pil: + qcom,sdm845-mss-pil: + must be "wdog", "fatal", "ready", "handover", "stop-ack", + "shutdown-ack" + +- firmware-name: + Usage: optional + Value type: <stringlist> + Definition: must list the relative firmware image paths for mba and + modem. They are used for booting and authenticating the + Hexagon core. - clocks: Usage: required Value type: <phandle> - Definition: reference to the iface, bus and mem clocks to be held on - behalf of the booting of the Hexagon core + Definition: reference to the clocks that match clock-names - clock-names: Usage: required Value type: <stringlist> - Definition: must be "iface", "bus", "mem" + Definition: The clocks needed depend on the compatible string: + qcom,ipq8074-wcss-pil: + no clock names required + qcom,q6v5-pil: + qcom,msm8916-mss-pil: + qcom,msm8974-mss-pil: + must be "iface", "bus", "mem", "xo" + qcom,msm8996-mss-pil: + must be "iface", "bus", "mem", "xo", "gpll0_mss", + "snoc_axi", "mnoc_axi", "pnoc", "qdss" + qcom,sdm845-mss-pil: + must be "iface", "bus", "mem", "xo", "gpll0_mss", + "snoc_axi", "mnoc_axi", "prng" - resets: Usage: required @@ -65,6 +92,19 @@ on the Qualcomm Hexagon core. must be "mss_restart", "pdc_reset" for the modem sub-system on SDM845 SoCs +For the compatible strings below the following supplies are required: + "qcom,q6v5-pil" + "qcom,msm8916-mss-pil", +- cx-supply: +- mx-supply: +- pll-supply: + Usage: required + Value type: <phandle> + Definition: reference to the regulators to be held on behalf of the + booting of the Hexagon core + +For the compatible string below the following supplies are required: + "qcom,msm8974-mss-pil" - cx-supply: - mss-supply: - mx-supply: @@ -74,6 +114,33 @@ on the Qualcomm Hexagon core. Definition: reference to the regulators to be held on behalf of the booting of the Hexagon core +For the compatible string below the following supplies are required: + "qcom,msm8996-mss-pil" +- pll-supply: + Usage: required + Value type: <phandle> + Definition: reference to the regulators to be held on behalf of the + booting of the Hexagon core + +- power-domains: + Usage: required + Value type: <phandle> + Definition: reference to power-domains that match power-domain-names + +- power-domain-names: + Usage: required + Value type: <stringlist> + Definition: The power-domains needed depend on the compatible string: + qcom,q6v5-pil: + qcom,ipq8074-wcss-pil: + qcom,msm8916-mss-pil: + qcom,msm8974-mss-pil: + no power-domain names required + qcom,msm8996-mss-pil: + must be "cx", "mx" + qcom,sdm845-mss-pil: + must be "cx", "mx", "mss", "load_state" + - qcom,smem-states: Usage: required Value type: <phandle> diff --git a/dts/Bindings/reset/brcm,brcmstb-reset.txt b/dts/Bindings/reset/brcm,brcmstb-reset.txt new file mode 100644 index 0000000000..6e5341b4f8 --- /dev/null +++ b/dts/Bindings/reset/brcm,brcmstb-reset.txt @@ -0,0 +1,27 @@ +Broadcom STB SW_INIT-style reset controller +=========================================== + +Broadcom STB SoCs have a SW_INIT-style reset controller with separate +SET/CLEAR/STATUS registers and possibly multiple banks, each of 32 bit +reset lines. + +Please also refer to reset.txt in this directory for common reset +controller binding usage. + +Required properties: +- compatible: should be brcm,brcmstb-reset +- reg: register base and length +- #reset-cells: must be set to 1 + +Example: + + reset: reset-controller@8404318 { + compatible = "brcm,brcmstb-reset"; + reg = <0x8404318 0x30>; + #reset-cells = <1>; + }; + + ðernet_switch { + resets = <&reset>; + reset-names = "switch"; + }; diff --git a/dts/Bindings/reset/fsl,imx7-src.txt b/dts/Bindings/reset/fsl,imx7-src.txt index 1ab1d10931..2ecf33815d 100644 --- a/dts/Bindings/reset/fsl,imx7-src.txt +++ b/dts/Bindings/reset/fsl,imx7-src.txt @@ -5,7 +5,9 @@ Please also refer to reset.txt in this directory for common reset controller binding usage. Required properties: -- compatible: Should be "fsl,imx7d-src", "syscon" +- compatible: + - For i.MX7 SoCs should be "fsl,imx7d-src", "syscon" + - For i.MX8MQ SoCs should be "fsl,imx8mq-src", "syscon" - reg: should be register base and length as documented in the datasheet - interrupts: Should contain SRC interrupt @@ -44,4 +46,5 @@ Example: For list of all valid reset indicies see -<dt-bindings/reset/imx7-reset.h> +<dt-bindings/reset/imx7-reset.h> for i.MX7 and +<dt-bindings/reset/imx8mq-reset.h> for i.MX8MQ diff --git a/dts/Bindings/reset/xlnx,zynqmp-reset.txt b/dts/Bindings/reset/xlnx,zynqmp-reset.txt new file mode 100644 index 0000000000..27a45fe5ec --- /dev/null +++ b/dts/Bindings/reset/xlnx,zynqmp-reset.txt @@ -0,0 +1,52 @@ +-------------------------------------------------------------------------- + = Zynq UltraScale+ MPSoC reset driver binding = +-------------------------------------------------------------------------- +The Zynq UltraScale+ MPSoC has several different resets. + +See Chapter 36 of the Zynq UltraScale+ MPSoC TRM (UG) for more information +about zynqmp resets. + +Please also refer to reset.txt in this directory for common reset +controller binding usage. + +Required Properties: +- compatible: "xlnx,zynqmp-reset" +- #reset-cells: Specifies the number of cells needed to encode reset + line, should be 1 + +------- +Example +------- + +firmware { + zynqmp_firmware: zynqmp-firmware { + compatible = "xlnx,zynqmp-firmware"; + method = "smc"; + + zynqmp_reset: reset-controller { + compatible = "xlnx,zynqmp-reset"; + #reset-cells = <1>; + }; + }; +}; + +Specifying reset lines connected to IP modules +============================================== + +Device nodes that need access to reset lines should +specify them as a reset phandle in their corresponding node as +specified in reset.txt. + +For list of all valid reset indicies see +<dt-bindings/reset/xlnx-zynqmp-resets.h> + +Example: + +serdes: zynqmp_phy@fd400000 { + ... + + resets = <&zynqmp_reset ZYNQMP_RESET_SATA>; + reset-names = "sata_rst"; + + ... +}; diff --git a/dts/Bindings/rtc/abracon,abx80x.txt b/dts/Bindings/rtc/abracon,abx80x.txt index 18b892d010..2405e35a1b 100644 --- a/dts/Bindings/rtc/abracon,abx80x.txt +++ b/dts/Bindings/rtc/abracon,abx80x.txt @@ -16,6 +16,7 @@ Required properties: "abracon,ab1803" "abracon,ab1804" "abracon,ab1805" + "microcrystal,rv1805" Using "abracon,abx80x" will enable chip autodetection. - "reg": I2C bus address of the device diff --git a/dts/Bindings/rtc/cdns,rtc.txt b/dts/Bindings/rtc/cdns,rtc.txt new file mode 100644 index 0000000000..14a04487b4 --- /dev/null +++ b/dts/Bindings/rtc/cdns,rtc.txt @@ -0,0 +1,25 @@ +Cadence Real Time Clock + +The Cadence RTC controller with date, time and alarm capabilities. +The alarm may wake the system from low-power state. + +Required properties: +- compatible: Should be "cdns,rtc-r109v3" +- reg: Specifies base physical address and size of the register area. +- interrupts: A single interrupt specifier. +- clocks: Must contain two entries: + - pclk: APB registers clock + - ref_clk: reference 1Hz or 100Hz clock, depending on IP configuration + See ../clocks/clock-bindings.txt for details. + +Example: + rtc0: rtc@fd080000 { + compatible = "cdns,rtc-r109v3"; + reg = <0xfd080000 0x1000>; + + clock-names = "pclk", "ref_clk"; + clocks = <&sysclock>, <&refclock>; + + interrupt-parent = <&gic>; + interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>; + }; diff --git a/dts/Bindings/rtc/isil,isl1208.txt b/dts/Bindings/rtc/isil,isl1208.txt new file mode 100644 index 0000000000..51f003006f --- /dev/null +++ b/dts/Bindings/rtc/isil,isl1208.txt @@ -0,0 +1,38 @@ +Intersil ISL1209/19 I2C RTC/Alarm chip with event in + +ISL12X9 have additional pins EVIN and #EVDET for tamper detection, while the +ISL1208 and ISL1218 do not. They are all use the same driver with the bindings +described here, with chip specific properties as noted. + +Required properties supported by the device: + - "compatible": Should be one of the following: + - "isil,isl1208" + - "isil,isl1209" + - "isil,isl1218" + - "isil,isl1219" + - "reg": I2C bus address of the device + +Optional properties: + - "interrupt-names": list which may contains "irq" and "evdet" + evdet applies to isl1209 and isl1219 only + - "interrupts": list of interrupts for "irq" and "evdet" + evdet applies to isl1209 and isl1219 only + - "isil,ev-evienb": Enable or disable internal pull on EVIN pin + Applies to isl1209 and isl1219 only + Possible values are 0 and 1 + Value 0 enables internal pull-up on evin pin, 1 disables it. + Default will leave the non-volatile configuration of the pullup + as is. + +Example isl1219 node with #IRQ pin connected to SoC gpio1 pin12 and #EVDET pin +connected to SoC gpio2 pin 24 and internal pull-up enabled in EVIN pin. + + isl1219: rtc@68 { + compatible = "isil,isl1219"; + reg = <0x68>; + interrupt-names = "irq", "evdet"; + interrupts-extended = <&gpio1 12 IRQ_TYPE_EDGE_FALLING>, + <&gpio2 24 IRQ_TYPE_EDGE_FALLING>; + isil,ev-evienb = <1>; + }; + diff --git a/dts/Bindings/rtc/isil,isl1219.txt b/dts/Bindings/rtc/isil,isl1219.txt deleted file mode 100644 index c3efd48e91..0000000000 --- a/dts/Bindings/rtc/isil,isl1219.txt +++ /dev/null @@ -1,29 +0,0 @@ -Intersil ISL1219 I2C RTC/Alarm chip with event in - -ISL1219 has additional pins EVIN and #EVDET for tamper detection. - -Required properties supported by the device: - - - "compatible": must be "isil,isl1219" - - "reg": I2C bus address of the device - -Optional properties: - - - "interrupt-names": list which may contains "irq" and "evdet" - - "interrupts": list of interrupts for "irq" and "evdet" - - "isil,ev-evienb": if present EV.EVIENB bit is set to the specified - value for proper operation. - - -Example isl1219 node with #IRQ pin connected to SoC gpio1 pin12 - and #EVDET pin connected to SoC gpio2 pin 24: - - isl1219: rtc@68 { - compatible = "isil,isl1219"; - reg = <0x68>; - interrupt-names = "irq", "evdet"; - interrupts-extended = <&gpio1 12 IRQ_TYPE_EDGE_FALLING>, - <&gpio2 24 IRQ_TYPE_EDGE_FALLING>; - isil,ev-evienb = <1>; - }; - diff --git a/dts/Bindings/rtc/nxp,pcf85063.txt b/dts/Bindings/rtc/nxp,pcf85063.txt new file mode 100644 index 0000000000..d3e380ad71 --- /dev/null +++ b/dts/Bindings/rtc/nxp,pcf85063.txt @@ -0,0 +1,18 @@ +* NXP PCF85063 Real Time Clock + +Required properties: +- compatible: Should contain "nxp,pcf85063". +- reg: I2C address for chip. + +Optional property: +- quartz-load-femtofarads: The capacitive load of the quartz(x-tal), + expressed in femto Farad (fF). Valid values are 7000 and 12500. + Default value (if no value is specified) is 7000fF. + +Example: + +pcf85063: rtc@51 { + compatible = "nxp,pcf85063"; + reg = <0x51>; + quartz-load-femtofarads = <12500>; +}; diff --git a/dts/Bindings/rtc/nxp,pcf8523.txt b/dts/Bindings/rtc/nxp,pcf8523.txt new file mode 100644 index 0000000000..0b1080c60f --- /dev/null +++ b/dts/Bindings/rtc/nxp,pcf8523.txt @@ -0,0 +1,18 @@ +* NXP PCF8523 Real Time Clock + +Required properties: +- compatible: Should contain "nxp,pcf8523". +- reg: I2C address for chip. + +Optional property: +- quartz-load-femtofarads: The capacitive load of the quartz(x-tal), + expressed in femto Farad (fF). Valid values are 7000 and 12500. + Default value (if no value is specified) is 12500fF. + +Example: + +pcf8523: rtc@68 { + compatible = "nxp,pcf8523"; + reg = <0x68>; + quartz-load-femtofarads = <7000>; +}; diff --git a/dts/Bindings/rtc/rtc-meson.txt b/dts/Bindings/rtc/rtc-meson.txt new file mode 100644 index 0000000000..e921fe66a3 --- /dev/null +++ b/dts/Bindings/rtc/rtc-meson.txt @@ -0,0 +1,35 @@ +* Amlogic Meson6, Meson8, Meson8b and Meson8m2 RTC + +Required properties: +- compatible: should be one of the following describing the hardware: + * "amlogic,meson6-rtc" + * "amlogic,meson8-rtc" + * "amlogic,meson8b-rtc" + * "amlogic,meson8m2-rtc" + +- reg: physical register space for the controller's memory mapped registers. +- interrupts: the interrupt line of the RTC block. +- clocks: reference to the external 32.768kHz crystal oscillator. +- vdd-supply: reference to the power supply of the RTC block. +- resets: reset controller reference to allow reset of the controller + +Optional properties for the battery-backed non-volatile memory: +- #address-cells: should be 1 to address the battery-backed non-volatile memory +- #size-cells: should be 1 to reference the battery-backed non-volatile memory + +Optional child nodes: +- see ../nvmem/nvmem.txt + +Example: + + rtc: rtc@740 { + compatible = "amlogic,meson6-rtc"; + reg = <0x740 0x14>; + interrupts = <GIC_SPI 72 IRQ_TYPE_EDGE_RISING>; + clocks = <&rtc32k_xtal>; + vdd-supply = <&rtc_vdd>; + resets = <&reset RESET_RTC>; + + #address-cells = <1>; + #size-cells = <1>; + }; diff --git a/dts/Bindings/rtc/rtc.txt b/dts/Bindings/rtc/rtc.txt index 7c8da69260..f4687c68c0 100644 --- a/dts/Bindings/rtc/rtc.txt +++ b/dts/Bindings/rtc/rtc.txt @@ -21,12 +21,16 @@ Optional properties The following properties may not be supported by all drivers. However, if a driver wants to support one of the below features, it should adapt the bindings below. -- trickle-resistor-ohms : Selected resistor for trickle charger. Should be given - if trickle charger should be enabled -- trickle-diode-disable : Do not use internal trickle charger diode Should be - given if internal trickle charger diode should be - disabled -- wakeup-source : Enables wake up of host system on alarm +- trickle-resistor-ohms : Selected resistor for trickle charger. Should be given + if trickle charger should be enabled +- trickle-diode-disable : Do not use internal trickle charger diode Should be + given if internal trickle charger diode should be + disabled +- wakeup-source : Enables wake up of host system on alarm +- quartz-load-femtofarads : The capacitive load of the quartz(x-tal), + expressed in femto Farad (fF). + The default value shall be listed (if optional), + and likewise all valid values. Trivial RTCs ------------ @@ -39,21 +43,23 @@ possibly an interrupt line. Compatible Vendor / Chip ========== ============= abracon,abb5zes3 AB-RTCMC-32.768kHz-B5ZE-S3: Real Time Clock/Calendar Module with I2C Interface +abracon,abeoz9 AB-RTCMC-32.768kHz-EOZ9: Real Time Clock/Calendar Module with I2C Interface dallas,ds1374 I2C, 32-Bit Binary Counter Watchdog RTC with Trickle Charger and Reset Input/Output dallas,ds1672 Dallas DS1672 Real-time Clock dallas,ds3232 Extremely Accurate I²C RTC with Integrated Crystal and SRAM epson,rx8010 I2C-BUS INTERFACE REAL TIME CLOCK MODULE +epson,rx8571 I2C-BUS INTERFACE REAL TIME CLOCK MODULE with Battery Backed RAM epson,rx8581 I2C-BUS INTERFACE REAL TIME CLOCK MODULE emmicro,em3027 EM Microelectronic EM3027 Real-time Clock isil,isl1208 Intersil ISL1208 Low Power RTC with Battery Backed SRAM isil,isl1218 Intersil ISL1218 Low Power RTC with Battery Backed SRAM isil,isl12022 Intersil ISL12022 Real-time Clock +microcrystal,rv3028 Real Time Clock Module with I2C-Bus microcrystal,rv3029 Real Time Clock Module with I2C-Bus +microcrystal,rv8523 Real Time Clock nxp,pcf2127 Real-time clock nxp,pcf2129 Real-time clock -nxp,pcf8523 Real-time Clock nxp,pcf8563 Real-time clock/calendar -nxp,pcf85063 Tiny Real-Time Clock pericom,pt7c4338 Real-time Clock Module ricoh,r2025sd I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC ricoh,r2221tl I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC @@ -62,3 +68,4 @@ ricoh,rs5c372b I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC ricoh,rv5c386 I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC ricoh,rv5c387a I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC sii,s35390a 2-wire CMOS real-time clock +whwave,sd3078 I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC diff --git a/dts/Bindings/serial/8250.txt b/dts/Bindings/serial/8250.txt index da50321da3..3cba12f855 100644 --- a/dts/Bindings/serial/8250.txt +++ b/dts/Bindings/serial/8250.txt @@ -21,6 +21,7 @@ Required properties: - "altr,16550-FIFO128" - "fsl,16550-FIFO64" - "fsl,ns16550" + - "intel,xscale-uart" - "ti,da830-uart" - "aspeed,ast2400-vuart" - "aspeed,ast2500-vuart" diff --git a/dts/Bindings/serial/ingenic,uart.txt b/dts/Bindings/serial/ingenic,uart.txt index c3c6406d5c..24ed8769f4 100644 --- a/dts/Bindings/serial/ingenic,uart.txt +++ b/dts/Bindings/serial/ingenic,uart.txt @@ -6,7 +6,8 @@ Required properties: - "ingenic,jz4760-uart", - "ingenic,jz4770-uart", - "ingenic,jz4775-uart", - - "ingenic,jz4780-uart". + - "ingenic,jz4780-uart", + - "ingenic,x1000-uart". - reg : offset and length of the register set for the device. - interrupts : should contain uart interrupt. - clocks : phandles to the module & baud clocks. diff --git a/dts/Bindings/serial/milbeaut-uart.txt b/dts/Bindings/serial/milbeaut-uart.txt new file mode 100644 index 0000000000..3d2fb1a7ba --- /dev/null +++ b/dts/Bindings/serial/milbeaut-uart.txt @@ -0,0 +1,21 @@ +Socionext Milbeaut UART controller + +Required properties: +- compatible: should be "socionext,milbeaut-usio-uart". +- reg: offset and length of the register set for the device. +- interrupts: two interrupts specifier. +- interrupt-names: should be "rx", "tx". +- clocks: phandle to the input clock. + +Optional properties: +- auto-flow-control: flow control enable. + +Example: + usio1: usio_uart@1e700010 { + compatible = "socionext,milbeaut-usio-uart"; + reg = <0x1e700010 0x10>; + interrupts = <0 141 0x4>, <0 149 0x4>; + interrupt-names = "rx", "tx"; + clocks = <&clk 2>; + auto-flow-control; + }; diff --git a/dts/Bindings/serial/mtk-uart.txt b/dts/Bindings/serial/mtk-uart.txt index 742cb47059..bcfb13194f 100644 --- a/dts/Bindings/serial/mtk-uart.txt +++ b/dts/Bindings/serial/mtk-uart.txt @@ -16,6 +16,7 @@ Required properties: * "mediatek,mt8127-uart" for MT8127 compatible UARTS * "mediatek,mt8135-uart" for MT8135 compatible UARTS * "mediatek,mt8173-uart" for MT8173 compatible UARTS + * "mediatek,mt8183-uart", "mediatek,mt6577-uart" for MT8183 compatible UARTS * "mediatek,mt6577-uart" for MT6577 and all of the above - reg: The base address of the UART register bank. diff --git a/dts/Bindings/serial/nvidia,tegra194-tcu.txt b/dts/Bindings/serial/nvidia,tegra194-tcu.txt new file mode 100644 index 0000000000..085a8591ac --- /dev/null +++ b/dts/Bindings/serial/nvidia,tegra194-tcu.txt @@ -0,0 +1,35 @@ +NVIDIA Tegra Combined UART (TCU) + +The TCU is a system for sharing a hardware UART instance among multiple +systems within the Tegra SoC. It is implemented through a mailbox- +based protocol where each "virtual UART" has a pair of mailboxes, one +for transmitting and one for receiving, that is used to communicate +with the hardware implementing the TCU. + +Required properties: +- name : Should be tcu +- compatible + Array of strings + One of: + - "nvidia,tegra194-tcu" +- mbox-names: + "rx" - Mailbox for receiving data from hardware UART + "tx" - Mailbox for transmitting data to hardware UART +- mboxes: Mailboxes corresponding to the mbox-names. + +This node is a mailbox consumer. See the following files for details of +the mailbox subsystem, and the specifiers implemented by the relevant +provider(s): + +- .../mailbox/mailbox.txt +- .../mailbox/nvidia,tegra186-hsp.txt + +Example bindings: +----------------- + +tcu: tcu { + compatible = "nvidia,tegra194-tcu"; + mboxes = <&hsp_top0 TEGRA_HSP_MBOX_TYPE_SM 0>, + <&hsp_aon TEGRA_HSP_MBOX_TYPE_SM 1>; + mbox-names = "rx", "tx"; +}; diff --git a/dts/Bindings/serial/omap_serial.txt b/dts/Bindings/serial/omap_serial.txt index c35d5ece11..0a9b5444f4 100644 --- a/dts/Bindings/serial/omap_serial.txt +++ b/dts/Bindings/serial/omap_serial.txt @@ -22,6 +22,8 @@ Optional properties: - dma-names : "rx" for receive channel, "tx" for transmit channel. - rs485-rts-delay, rs485-rx-during-tx, linux,rs485-enabled-at-boot-time: see rs485.txt - rs485-rts-active-high: drive RTS high when sending (default is low). +- clocks: phandle to the functional clock as per + Documentation/devicetree/bindings/clock/clock-bindings.txt Example: diff --git a/dts/Bindings/serial/pl011.txt b/dts/Bindings/serial/pl011.txt deleted file mode 100644 index 77863aefe9..0000000000 --- a/dts/Bindings/serial/pl011.txt +++ /dev/null @@ -1,51 +0,0 @@ -* ARM AMBA Primecell PL011 serial UART - -Required properties: -- compatible: must be "arm,primecell", "arm,pl011", "zte,zx296702-uart" -- reg: exactly one register range with length 0x1000 -- interrupts: exactly one interrupt specifier - -Optional properties: -- pinctrl: - When present, must have one state named "default", - and may contain a second name named "sleep". The former - state sets up pins for ordinary operation whereas - the latter state will put the associated pins to sleep - when the UART is unused -- clocks: - When present, the first clock listed must correspond to - the clock named UARTCLK on the IP block, i.e. the clock - to the external serial line, whereas the second clock - must correspond to the PCLK clocking the internal logic - of the block. Just listing one clock (the first one) is - deprecated. -- clock-names: - When present, the first clock listed must be named - "uartclk" and the second clock listed must be named - "apb_pclk" -- dmas: - When present, may have one or two dma channels. - The first one must be named "rx", the second one - must be named "tx". -- auto-poll: - Enables polling when using RX DMA. -- poll-rate-ms: - Rate at which poll occurs when auto-poll is set, - default 100ms. -- poll-timeout-ms: - Poll timeout when auto-poll is set, default - 3000ms. - -See also bindings/arm/primecell.txt - -Example: - -uart@80120000 { - compatible = "arm,pl011", "arm,primecell"; - reg = <0x80120000 0x1000>; - interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&dma 13 0 0x2>, <&dma 13 0 0x0>; - dma-names = "rx", "tx"; - clocks = <&foo_clk>, <&bar_clk>; - clock-names = "uartclk", "apb_pclk"; -}; diff --git a/dts/Bindings/serial/pl011.yaml b/dts/Bindings/serial/pl011.yaml new file mode 100644 index 0000000000..1a64d59152 --- /dev/null +++ b/dts/Bindings/serial/pl011.yaml @@ -0,0 +1,126 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/serial/pl011.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM AMBA Primecell PL011 serial UART + +maintainers: + - Rob Herring <robh@kernel.org> + +allOf: + - $ref: /schemas/serial.yaml# + +# Need a custom select here or 'arm,primecell' will match on lots of nodes +select: + properties: + compatible: + contains: + enum: + - arm,pl011 + - zte,zx296702-uart + required: + - compatible + +properties: + compatible: + oneOf: + - items: + - const: arm,pl011 + - const: arm,primecell + - items: + - const: zte,zx296702-uart + - const: arm,primecell + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + pinctrl-0: true + pinctrl-1: true + + pinctrl-names: + description: + When present, must have one state named "default", + and may contain a second name named "sleep". The former + state sets up pins for ordinary operation whereas + the latter state will put the associated pins to sleep + when the UART is unused + minItems: 1 + items: + - const: default + - const: sleep + + clocks: + description: + When present, the first clock listed must correspond to + the clock named UARTCLK on the IP block, i.e. the clock + to the external serial line, whereas the second clock + must correspond to the PCLK clocking the internal logic + of the block. Just listing one clock (the first one) is + deprecated. + maxItems: 2 + + clock-names: + items: + - const: uartclk + - const: apb_pclk + + dmas: + minItems: 1 + maxItems: 2 + + dma-names: + minItems: 1 + items: + - const: rx + - const: tx + + auto-poll: + description: + Enables polling when using RX DMA. + type: boolean + + poll-rate-ms: + description: + Rate at which poll occurs when auto-poll is set. + default 100ms. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - default: 100 + + poll-timeout-ms: + description: + Poll timeout when auto-poll is set, default + 3000ms. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - default: 3000 + +required: + - compatible + - reg + - interrupts + +dependencies: + poll-rate-ms: [ auto-poll ] + poll-timeout-ms: [ auto-poll ] + +additionalProperties: false + +examples: + - | + serial@80120000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x80120000 0x1000>; + interrupts = <0 11 4>; + dmas = <&dma 13 0 0x2>, <&dma 13 0 0x0>; + dma-names = "rx", "tx"; + clocks = <&foo_clk>, <&bar_clk>; + clock-names = "uartclk", "apb_pclk"; + }; + +... diff --git a/dts/Bindings/serial/renesas,rzn1-uart.txt b/dts/Bindings/serial/renesas,rzn1-uart.txt deleted file mode 100644 index 8b9e0d4dc2..0000000000 --- a/dts/Bindings/serial/renesas,rzn1-uart.txt +++ /dev/null @@ -1,10 +0,0 @@ -Renesas RZ/N1 UART - -This controller is based on the Synopsys DesignWare ABP UART and inherits all -properties defined in snps-dw-apb-uart.txt except for the compatible property. - -Required properties: -- compatible : The device specific string followed by the generic RZ/N1 string. - Therefore it must be one of: - "renesas,r9a06g032-uart", "renesas,rzn1-uart" - "renesas,r9a06g033-uart", "renesas,rzn1-uart" diff --git a/dts/Bindings/serial/renesas,sci-serial.txt b/dts/Bindings/serial/renesas,sci-serial.txt index 20232ad05d..dd63151dc8 100644 --- a/dts/Bindings/serial/renesas,sci-serial.txt +++ b/dts/Bindings/serial/renesas,sci-serial.txt @@ -29,7 +29,9 @@ Required properties: - "renesas,scif-r8a774c0" for R8A774C0 (RZ/G2E) SCIF compatible UART. - "renesas,hscif-r8a774c0" for R8A774C0 (RZ/G2E) HSCIF compatible UART. - "renesas,scif-r8a7778" for R8A7778 (R-Car M1) SCIF compatible UART. + - "renesas,hscif-r8a7778" for R8A7778 (R-Car M1) HSCIF compatible UART. - "renesas,scif-r8a7779" for R8A7779 (R-Car H1) SCIF compatible UART. + - "renesas,hscif-r8a7779" for R8A7779 (R-Car H1) HSCIF compatible UART. - "renesas,scif-r8a7790" for R8A7790 (R-Car H2) SCIF compatible UART. - "renesas,scifa-r8a7790" for R8A7790 (R-Car H2) SCIFA compatible UART. - "renesas,scifb-r8a7790" for R8A7790 (R-Car H2) SCIFB compatible UART. diff --git a/dts/Bindings/serial/snps-dw-apb-uart.txt b/dts/Bindings/serial/snps-dw-apb-uart.txt deleted file mode 100644 index 12bbe9f225..0000000000 --- a/dts/Bindings/serial/snps-dw-apb-uart.txt +++ /dev/null @@ -1,76 +0,0 @@ -* Synopsys DesignWare ABP UART - -Required properties: -- compatible : "snps,dw-apb-uart" -- reg : offset and length of the register set for the device. -- interrupts : should contain uart interrupt. - -Clock handling: -The clock rate of the input clock needs to be supplied by one of -- clock-frequency : the input clock frequency for the UART. -- clocks : phandle to the input clock - -The supplying peripheral clock can also be handled, needing a second property -- clock-names: tuple listing input clock names. - Required elements: "baudclk", "apb_pclk" - -Optional properties: -- snps,uart-16550-compatible : reflects the value of UART_16550_COMPATIBLE - configuration parameter. Define this if your UART does not implement the busy - functionality. -- resets : phandle to the parent reset controller. -- reg-shift : quantity to shift the register offsets by. If this property is - not present then the register offsets are not shifted. -- reg-io-width : the size (in bytes) of the IO accesses that should be - performed on the device. If this property is not present then single byte - accesses are used. -- dcd-override : Override the DCD modem status signal. This signal will always - be reported as active instead of being obtained from the modem status - register. Define this if your serial port does not use this pin. -- dsr-override : Override the DTS modem status signal. This signal will always - be reported as active instead of being obtained from the modem status - register. Define this if your serial port does not use this pin. -- cts-override : Override the CTS modem status signal. This signal will always - be reported as active instead of being obtained from the modem status - register. Define this if your serial port does not use this pin. -- ri-override : Override the RI modem status signal. This signal will always be - reported as inactive instead of being obtained from the modem status register. - Define this if your serial port does not use this pin. - -Example: - - uart@80230000 { - compatible = "snps,dw-apb-uart"; - reg = <0x80230000 0x100>; - clock-frequency = <3686400>; - interrupts = <10>; - reg-shift = <2>; - reg-io-width = <4>; - dcd-override; - dsr-override; - cts-override; - ri-override; - }; - -Example with one clock: - - uart@80230000 { - compatible = "snps,dw-apb-uart"; - reg = <0x80230000 0x100>; - clocks = <&baudclk>; - interrupts = <10>; - reg-shift = <2>; - reg-io-width = <4>; - }; - -Example with two clocks: - - uart@80230000 { - compatible = "snps,dw-apb-uart"; - reg = <0x80230000 0x100>; - clocks = <&baudclk>, <&apb_pclk>; - clock-names = "baudclk", "apb_pclk"; - interrupts = <10>; - reg-shift = <2>; - reg-io-width = <4>; - }; diff --git a/dts/Bindings/serial/snps-dw-apb-uart.yaml b/dts/Bindings/serial/snps-dw-apb-uart.yaml new file mode 100644 index 0000000000..b420025426 --- /dev/null +++ b/dts/Bindings/serial/snps-dw-apb-uart.yaml @@ -0,0 +1,140 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/serial/snps-dw-apb-uart.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Synopsys DesignWare ABP UART + +maintainers: + - Rob Herring <robh@kernel.org> + +allOf: + - $ref: /schemas/serial.yaml# + +properties: + compatible: + oneOf: + - items: + - enum: + - renesas,r9a06g032-uart + - renesas,r9a06g033-uart + - const: renesas,rzn1-uart + - items: + - enum: + - rockchip,px30-uart + - rockchip,rk3036-uart + - rockchip,rk3066-uart + - rockchip,rk3188-uart + - rockchip,rk3288-uart + - rockchip,rk3328-uart + - rockchip,rk3368-uart + - rockchip,rk3399-uart + - rockchip,rv1108-uart + - const: snps,dw-apb-uart + - items: + - enum: + - brcm,bcm11351-dw-apb-uart + - brcm,bcm21664-dw-apb-uart + - const: snps,dw-apb-uart + - const: snps,dw-apb-uart + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clock-frequency: true + + clocks: + minItems: 1 + maxItems: 2 + + clock-names: + items: + - const: baudclk + - const: apb_pclk + + snps,uart-16550-compatible: + description: reflects the value of UART_16550_COMPATIBLE configuration + parameter. Define this if your UART does not implement the busy functionality. + type: boolean + + resets: + maxItems: 1 + + reg-shift: true + + reg-io-width: true + + dcd-override: + description: Override the DCD modem status signal. This signal will + always be reported as active instead of being obtained from the modem + status register. Define this if your serial port does not use this + pin. + type: boolean + + dsr-override: + description: Override the DTS modem status signal. This signal will + always be reported as active instead of being obtained from the modem + status register. Define this if your serial port does not use this + pin. + type: boolean + + cts-override: + description: Override the CTS modem status signal. This signal will + always be reported as active instead of being obtained from the modem + status register. Define this if your serial port does not use this + pin. + type: boolean + + ri-override: + description: Override the RI modem status signal. This signal will always + be reported as inactive instead of being obtained from the modem status + register. Define this if your serial port does not use this pin. + type: boolean + +required: + - compatible + - reg + - interrupts + +examples: + - | + serial@80230000 { + compatible = "snps,dw-apb-uart"; + reg = <0x80230000 0x100>; + clock-frequency = <3686400>; + interrupts = <10>; + reg-shift = <2>; + reg-io-width = <4>; + dcd-override; + dsr-override; + cts-override; + ri-override; + }; + + - | + // Example with one clock: + serial@80230000 { + compatible = "snps,dw-apb-uart"; + reg = <0x80230000 0x100>; + clocks = <&baudclk>; + interrupts = <10>; + reg-shift = <2>; + reg-io-width = <4>; + }; + + - | + // Example with two clocks: + serial@80230000 { + compatible = "snps,dw-apb-uart"; + reg = <0x80230000 0x100>; + clocks = <&baudclk>, <&apb_pclk>; + clock-names = "baudclk", "apb_pclk"; + interrupts = <10>; + reg-shift = <2>; + reg-io-width = <4>; + }; +... diff --git a/dts/Bindings/soc/amlogic/clk-measure.txt b/dts/Bindings/soc/amlogic/clk-measure.txt index 205a54bcd7..6bf6b43f8d 100644 --- a/dts/Bindings/soc/amlogic/clk-measure.txt +++ b/dts/Bindings/soc/amlogic/clk-measure.txt @@ -9,6 +9,8 @@ Required properties: "amlogic,meson-gx-clk-measure" for GX SoCs "amlogic,meson8-clk-measure" for Meson8 SoCs "amlogic,meson8b-clk-measure" for Meson8b SoCs + "amlogic,meson-axg-clk-measure" for AXG SoCs + "amlogic,meson-g12a-clk-measure" for G12a SoCs - reg: base address and size of the Clock Measurer register space. Example: diff --git a/dts/Bindings/soc/bcm/brcm,bcm2835-pm.txt b/dts/Bindings/soc/bcm/brcm,bcm2835-pm.txt new file mode 100644 index 0000000000..3b7d329563 --- /dev/null +++ b/dts/Bindings/soc/bcm/brcm,bcm2835-pm.txt @@ -0,0 +1,46 @@ +BCM2835 PM (Power domains, watchdog) + +The PM block controls power domains and some reset lines, and includes +a watchdog timer. This binding supersedes the brcm,bcm2835-pm-wdt +binding which covered some of PM's register range and functionality. + +Required properties: + +- compatible: Should be "brcm,bcm2835-pm" +- reg: Specifies base physical address and size of the two + register ranges ("PM" and "ASYNC_BRIDGE" in that + order) +- clocks: a) v3d: The V3D clock from CPRMAN + b) peri_image: The PERI_IMAGE clock from CPRMAN + c) h264: The H264 clock from CPRMAN + d) isp: The ISP clock from CPRMAN +- #reset-cells: Should be 1. This property follows the reset controller + bindings[1]. +- #power-domain-cells: Should be 1. This property follows the power domain + bindings[2]. + +Optional properties: + +- timeout-sec: Contains the watchdog timeout in seconds +- system-power-controller: Whether the watchdog is controlling the + system power. This node follows the power controller bindings[3]. + +[1] Documentation/devicetree/bindings/reset/reset.txt +[2] Documentation/devicetree/bindings/power/power_domain.txt +[3] Documentation/devicetree/bindings/power/power-controller.txt + +Example: + +pm { + compatible = "brcm,bcm2835-pm", "brcm,bcm2835-pm-wdt"; + #power-domain-cells = <1>; + #reset-cells = <1>; + reg = <0x7e100000 0x114>, + <0x7e00a000 0x24>; + clocks = <&clocks BCM2835_CLOCK_V3D>, + <&clocks BCM2835_CLOCK_PERI_IMAGE>, + <&clocks BCM2835_CLOCK_H264>, + <&clocks BCM2835_CLOCK_ISP>; + clock-names = "v3d", "peri_image", "h264", "isp"; + system-power-controller; +}; diff --git a/dts/Bindings/soc/qcom/qcom,smd-rpm.txt b/dts/Bindings/soc/qcom/qcom,smd-rpm.txt index ec95705ba6..f3fa313963 100644 --- a/dts/Bindings/soc/qcom/qcom,smd-rpm.txt +++ b/dts/Bindings/soc/qcom/qcom,smd-rpm.txt @@ -23,6 +23,7 @@ resources. "qcom,rpm-msm8916" "qcom,rpm-msm8974" "qcom,rpm-msm8998" + "qcom,rpm-sdm660" "qcom,rpm-qcs404" - qcom,smd-channels: diff --git a/dts/Bindings/sound/adi,adau1977.txt b/dts/Bindings/sound/adi,adau1977.txt index e79aeef73f..9225472c80 100644 --- a/dts/Bindings/sound/adi,adau1977.txt +++ b/dts/Bindings/sound/adi,adau1977.txt @@ -17,12 +17,18 @@ Required properties: Documentation/devicetree/bindings/regulator/regulator.txt Optional properties: - - reset-gpio: the reset pin for the chip, for more details consult + - reset-gpios: the reset pin for the chip, for more details consult Documentation/devicetree/bindings/gpio/gpio.txt - DVDD-supply: supply voltage for the digital core, please consult Documentation/devicetree/bindings/regulator/regulator.txt +- adi,micbias: configures the voltage setting for the MICBIAS pin. + Select 0/1/2/3/4/5/6/7/8 to specify MICBIAS voltage + 5V/5.5V/6V/6.5V/7V/7.5V/8V/8.5V/9V + If not specified the default value will be "7" meaning 8.5 Volts. + This property is only valid for the ADAU1977 + For required properties on SPI, please consult Documentation/devicetree/bindings/spi/spi-bus.txt @@ -40,7 +46,8 @@ Examples: AVDD-supply = <®ulator>; DVDD-supply = <®ulator_digital>; - reset_gpio = <&gpio 10 GPIO_ACTIVE_LOW>; + adi,micbias = <3>; + reset-gpios = <&gpio 10 GPIO_ACTIVE_LOW>; }; adau1977_i2c: adau1977@11 { @@ -50,5 +57,5 @@ Examples: AVDD-supply = <®ulator>; DVDD-supply = <®ulator_digital>; - reset_gpio = <&gpio 10 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio 10 GPIO_ACTIVE_LOW>; }; diff --git a/dts/Bindings/sound/ak4458.txt b/dts/Bindings/sound/ak4458.txt index 7839be7844..e5820235e0 100644 --- a/dts/Bindings/sound/ak4458.txt +++ b/dts/Bindings/sound/ak4458.txt @@ -4,7 +4,7 @@ This device supports I2C mode. Required properties: -- compatible : "asahi-kasei,ak4458" +- compatible : "asahi-kasei,ak4458" or "asahi-kasei,ak4497" - reg : The I2C address of the device for I2C Optional properties: diff --git a/dts/Bindings/sound/audio-graph-scu-card.txt b/dts/Bindings/sound/audio-graph-scu-card.txt deleted file mode 100644 index 62d42768a0..0000000000 --- a/dts/Bindings/sound/audio-graph-scu-card.txt +++ /dev/null @@ -1,123 +0,0 @@ -Audio-Graph-SCU-Card: - -Audio-Graph-SCU-Card is "Audio-Graph-Card" + "ALSA DPCM". - -It is based on common bindings for device graphs. -see ${LINUX}/Documentation/devicetree/bindings/graph.txt - -Basically, Audio-Graph-SCU-Card property is same as -Simple-Card / Simple-SCU-Card / Audio-Graph-Card. -see ${LINUX}/Documentation/devicetree/bindings/sound/simple-card.txt - ${LINUX}/Documentation/devicetree/bindings/sound/simple-scu-card.txt - ${LINUX}/Documentation/devicetree/bindings/sound/audio-graph-card.txt - -Below are same as Simple-Card / Audio-Graph-Card. - -- label -- dai-format -- frame-master -- bitclock-master -- bitclock-inversion -- frame-inversion -- dai-tdm-slot-num -- dai-tdm-slot-width -- clocks / system-clock-frequency - -Below are same as Simple-SCU-Card. - -- convert-rate -- convert-channels -- prefix -- routing - -Required properties: - -- compatible : "audio-graph-scu-card"; -- dais : list of CPU DAI port{s} - -Example 1. Sampling Rate Conversion - - sound_card { - compatible = "audio-graph-scu-card"; - - label = "sound-card"; - prefix = "codec"; - routing = "codec Playback", "DAI0 Playback", - "DAI0 Capture", "codec Capture"; - convert-rate = <48000>; - - dais = <&cpu_port>; - }; - - audio-codec { - ... - - port { - codec_endpoint: endpoint { - remote-endpoint = <&cpu_endpoint>; - }; - }; - }; - - dai-controller { - ... - cpu_port: port { - cpu_endpoint: endpoint { - remote-endpoint = <&codec_endpoint>; - - dai-format = "left_j"; - ... - }; - }; - }; - -Example 2. 2 CPU 1 Codec (Mixing) - - sound_card { - compatible = "audio-graph-scu-card"; - - label = "sound-card"; - routing = "codec Playback", "DAI0 Playback", - "codec Playback", "DAI1 Playback", - "DAI0 Capture", "codec Capture"; - - dais = <&cpu_port0 - &cpu_port1>; - }; - - audio-codec { - ... - - audio-graph-card,prefix = "codec"; - audio-graph-card,convert-rate = <48000>; - port { - codec_endpoint0: endpoint { - remote-endpoint = <&cpu_endpoint0>; - }; - codec_endpoint1: endpoint { - remote-endpoint = <&cpu_endpoint1>; - }; - }; - }; - - dai-controller { - ... - ports { - cpu_port0: port { - cpu_endpoint0: endpoint { - remote-endpoint = <&codec_endpoint0>; - - dai-format = "left_j"; - ... - }; - }; - cpu_port1: port { - cpu_endpoint1: endpoint { - remote-endpoint = <&codec_endpoint1>; - - dai-format = "left_j"; - ... - }; - }; - }; - }; diff --git a/dts/Bindings/sound/cs35l36.txt b/dts/Bindings/sound/cs35l36.txt new file mode 100644 index 0000000000..912bd162b4 --- /dev/null +++ b/dts/Bindings/sound/cs35l36.txt @@ -0,0 +1,168 @@ +CS35L36 Speaker Amplifier + +Required properties: + + - compatible : "cirrus,cs35l36" + + - reg : the I2C address of the device for I2C + + - VA-supply, VP-supply : power supplies for the device, + as covered in + Documentation/devicetree/bindings/regulator/regulator.txt. + + - cirrus,boost-ctl-millivolt : Boost Voltage Value. Configures the boost + converter's output voltage in mV. The range is from 2550mV to 12000mV with + increments of 50mV. + (Default) VP + + - cirrus,boost-peak-milliamp : Boost-converter peak current limit in mA. + Configures the peak current by monitoring the current through the boost FET. + Range starts at 1600mA and goes to a maximum of 4500mA with increments of + 50mA. + (Default) 4.50 Amps + + - cirrus,boost-ind-nanohenry : Inductor estimation LBST reference value. + Seeds the digital boost converter's inductor estimation block with the initial + inductance value to reference. + + 1000 = 1uH (Default) + 1200 = 1.2uH + +Optional properties: + - cirrus,multi-amp-mode : Boolean to determine if there are more than + one amplifier in the system. If more than one it is best to Hi-Z the ASP + port to prevent bus contention on the output signal + + - cirrus,boost-ctl-select : Boost conerter control source selection. + Selects the source of the BST_CTL target VBST voltage for the boost + converter to generate. + 0x00 - Control Port Value + 0x01 - Class H Tracking (Default) + 0x10 - MultiDevice Sync Value + + - cirrus,amp-pcm-inv : Boolean to determine Amplifier will invert incoming + PCM data + + - cirrus,imon-pol-inv : Boolean to determine Amplifier will invert the + polarity of outbound IMON feedback data + + - cirrus,vmon-pol-inv : Boolean to determine Amplifier will invert the + polarity of outbound VMON feedback data + + - cirrus,dcm-mode-enable : Boost converter automatic DCM Mode enable. + This enables the digital boost converter to operate in a low power + (Discontinuous Conduction) mode during low loading conditions. + + - cirrus,weak-fet-disable : Boolean : The strength of the output drivers is + reduced when operating in a Weak-FET Drive Mode and must not be used to drive + a large load. + + - cirrus,classh-wk-fet-delay : Weak-FET entry delay. Controls the delay + (in ms) before the Class H algorithm switches to the weak-FET voltage + (after the audio falls and remains below the value specified in WKFET_AMP_THLD). + + 0 = 0ms + 1 = 5ms + 2 = 10ms + 3 = 50ms + 4 = 100ms (Default) + 5 = 200ms + 6 = 500ms + 7 = 1000ms + + - cirrus,classh-weak-fet-thld-millivolt : Weak-FET amplifier drive threshold. + Configures the signal threshold at which the PWM output stage enters + weak-FET operation. The range is 50mV to 700mV in 50mV increments. + + - cirrus,temp-warn-threshold : Amplifier overtemperature warning threshold. + Configures the threshold at which the overtemperature warning condition occurs. + When the threshold is met, the overtemperature warning attenuation is applied + and the TEMP_WARN_EINT interrupt status bit is set. + If TEMP_WARN_MASK = 0, INTb is asserted. + + 0 = 105C + 1 = 115C + 2 = 125C (Default) + 3 = 135C + + - cirrus,irq-drive-select : Selects the driver type of the selected interrupt + output. + + 0 = Open-drain + 1 = Push-pull (Default) + + - cirrus,irq-gpio-select : Selects the pin to serve as the programmable + interrupt output. + + 0 = PDM_DATA / SWIRE_SD / INT (Default) + 1 = GPIO + +Optional properties for the "cirrus,vpbr-config" Sub-node + + - cirrus,vpbr-en : VBST brownout prevention enable. Configures whether the + VBST brownout prevention algorithm is enabled or disabled. + + 0 = VBST brownout prevention disabled (default) + 1 = VBST brownout prevention enabled + + See Section 7.31.1 VPBR Config for configuration options & further details + + - cirrus,vpbr-thld : Initial VPBR threshold. Configures the VP brownout + threshold voltage + + - cirrus,cirrus,vpbr-atk-rate : Attenuation attack step rate. Configures the + amount delay between consecutive volume attenuation steps when a brownout + condition is present and the VP brownout condition is in an attacking state. + + - cirrus,vpbr-atk-vol : VP brownout prevention step size. Configures the VP + brownout prevention attacking attenuation step size when operating in either + digital volume or analog gain modes. + + - cirrus,vpbr-max-attn : Maximum attenuation that the VP brownout prevention + can apply to the audio signal. + + - cirrus,vpbr-wait : Configures the delay time between a brownout condition + no longer being present and the VP brownout prevention entering an attenuation + release state. + + - cirrus,vpbr-rel-rate : Attenuation release step rate. Configures the delay + between consecutive volume attenuation release steps when a brownout condition + is not longer present and the VP brownout is in an attenuation release state. + + - cirrus,vpbr-mute-en : During the attack state, if the vpbr-max-attn value + is reached, the error condition still remains, and this bit is set, the audio + is muted. + +Example: + +cs35l36: cs35l36@40 { + compatible = "cirrus,cs35l36"; + reg = <0x40>; + VA-supply = <&dummy_vreg>; + VP-supply = <&dummy_vreg>; + reset-gpios = <&gpio0 54 0>; + interrupt-parent = <&gpio8>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + + cirrus,boost-ind-nanohenry = <1000>; + cirrus,boost-ctl-millivolt = <10000>; + cirrus,boost-peak-milliamp = <4500>; + cirrus,boost-ctl-select = <0x00>; + cirrus,weak-fet-delay = <0x04>; + cirrus,weak-fet-thld = <0x01>; + cirrus,temp-warn-threshold = <0x01>; + cirrus,multi-amp-mode; + cirrus,irq-drive-select = <0x01>; + cirrus,irq-gpio-select = <0x01>; + + cirrus,vpbr-config { + cirrus,vpbr-en = <0x00>; + cirrus,vpbr-thld = <0x05>; + cirrus,vpbr-atk-rate = <0x02>; + cirrus,vpbr-atk-vol = <0x01>; + cirrus,vpbr-max-attn = <0x09>; + cirrus,vpbr-wait = <0x01>; + cirrus,vpbr-rel-rate = <0x05>; + cirrus,vpbr-mute-en = <0x00>; + }; +}; diff --git a/dts/Bindings/sound/cs4341.txt b/dts/Bindings/sound/cs4341.txt new file mode 100644 index 0000000000..12b4aa8ef0 --- /dev/null +++ b/dts/Bindings/sound/cs4341.txt @@ -0,0 +1,22 @@ +Cirrus Logic CS4341 audio DAC + +This device supports both I2C and SPI (configured with pin strapping +on the board). + +Required properties: + - compatible: "cirrus,cs4341a" + - reg : the I2C address of the device for I2C, the chip select + number for SPI. + +For required properties on I2C-bus, please consult +Documentation/devicetree/bindings/i2c/i2c.txt +For required properties on SPI-bus, please consult +Documentation/devicetree/bindings/spi/spi-bus.txt + +Example: + codec: cs4341@0 { + #sound-dai-cells = <0>; + compatible = "cirrus,cs4341a"; + reg = <0>; + spi-max-frequency = <6000000>; + }; diff --git a/dts/Bindings/sound/davinci-mcasp-audio.txt b/dts/Bindings/sound/davinci-mcasp-audio.txt index b279b6072b..a58f79f534 100644 --- a/dts/Bindings/sound/davinci-mcasp-audio.txt +++ b/dts/Bindings/sound/davinci-mcasp-audio.txt @@ -45,6 +45,23 @@ Optional properties: - fck_parent : Should contain a valid clock name which will be used as parent for the McASP fck +Optional GPIO support: +If any McASP pin need to be used as GPIO then the McASP node must have: +... + gpio-controller + #gpio-cells = <2>; +... + +When requesting a GPIO, the first parameter is the PIN index in McASP_P* +registers. +For example to request the AXR2 pin of mcasp8: +function-gpios = <&mcasp8 2 0>; + +Or to request the ACLKR pin of mcasp8: +function-gpios = <&mcasp8 29 0>; + +For generic gpio information, please refer to bindings/gpio/gpio.txt + Example: mcasp0: mcasp0@1d00000 { diff --git a/dts/Bindings/sound/fsl,micfil.txt b/dts/Bindings/sound/fsl,micfil.txt new file mode 100644 index 0000000000..53e227b152 --- /dev/null +++ b/dts/Bindings/sound/fsl,micfil.txt @@ -0,0 +1,32 @@ +NXP MICFIL Digital Audio Interface (MICFIL). + +The MICFIL digital interface provides a 16-bit audio signal from a PDM +microphone bitstream in a configurable output sampling rate. + +Required properties: + + - compatible : Compatible list, contains "fsl,imx8mm-micfil" + + - reg : Offset and length of the register set for the device. + + - interrupts : Contains the micfil interrupts. + + - clocks : Must contain an entry for each entry in clock-names. + + - clock-names : Must include the "ipg_clk" for register access and + "ipg_clk_app" for internal micfil clock. + + - dmas : Generic dma devicetree binding as described in + Documentation/devicetree/bindings/dma/dma.txt. + +Example: +micfil: micfil@30080000 { + compatible = "fsl,imx8mm-micfil"; + reg = <0x0 0x30080000 0x0 0x10000>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_PDM_IPG>, + <&clk IMX8MM_CLK_PDM_ROOT>; + clock-names = "ipg_clk", "ipg_clk_app"; + dmas = <&sdma2 24 26 0x80000000>; +}; diff --git a/dts/Bindings/sound/google,cros-ec-codec.txt b/dts/Bindings/sound/google,cros-ec-codec.txt new file mode 100644 index 0000000000..1084f7f22e --- /dev/null +++ b/dts/Bindings/sound/google,cros-ec-codec.txt @@ -0,0 +1,26 @@ +* Audio codec controlled by ChromeOS EC + +Google's ChromeOS EC codec is a digital mic codec provided by the +Embedded Controller (EC) and is controlled via a host-command interface. + +An EC codec node should only be found as a sub-node of the EC node (see +Documentation/devicetree/bindings/mfd/cros-ec.txt). + +Required properties: +- compatible: Must contain "google,cros-ec-codec" +- #sound-dai-cells: Should be 1. The cell specifies number of DAIs. +- max-dmic-gain: A number for maximum gain in dB on digital microphone. + +Example: + +cros-ec@0 { + compatible = "google,cros-ec-spi"; + + ... + + cros_ec_codec: ec-codec { + compatible = "google,cros-ec-codec"; + #sound-dai-cells = <1>; + max-dmic-gain = <43>; + }; +}; diff --git a/dts/Bindings/sound/ingenic,jz4725b-codec.txt b/dts/Bindings/sound/ingenic,jz4725b-codec.txt new file mode 100644 index 0000000000..05adc0d47b --- /dev/null +++ b/dts/Bindings/sound/ingenic,jz4725b-codec.txt @@ -0,0 +1,20 @@ +Ingenic JZ4725B codec controller + +Required properties: +- compatible : "ingenic,jz4725b-codec" +- reg : codec registers location and length +- clocks : phandle to the AIC clock. +- clock-names: must be set to "aic". +- #sound-dai-cells: Must be set to 0. + +Example: + +codec: audio-codec@100200a4 { + compatible = "ingenic,jz4725b-codec"; + reg = <0x100200a4 0x8>; + + #sound-dai-cells = <0>; + + clocks = <&cgu JZ4725B_CLK_AIC>; + clock-names = "aic"; +}; diff --git a/dts/Bindings/sound/ingenic,jz4740-codec.txt b/dts/Bindings/sound/ingenic,jz4740-codec.txt new file mode 100644 index 0000000000..1ffcade87e --- /dev/null +++ b/dts/Bindings/sound/ingenic,jz4740-codec.txt @@ -0,0 +1,20 @@ +Ingenic JZ4740 codec controller + +Required properties: +- compatible : "ingenic,jz4740-codec" +- reg : codec registers location and length +- clocks : phandle to the AIC clock. +- clock-names: must be set to "aic". +- #sound-dai-cells: Must be set to 0. + +Example: + +codec: audio-codec@10020080 { + compatible = "ingenic,jz4740-codec"; + reg = <0x10020080 0x8>; + + #sound-dai-cells = <0>; + + clocks = <&cgu JZ4740_CLK_AIC>; + clock-names = "aic"; +}; diff --git a/dts/Bindings/sound/mt6358.txt b/dts/Bindings/sound/mt6358.txt new file mode 100644 index 0000000000..5465730013 --- /dev/null +++ b/dts/Bindings/sound/mt6358.txt @@ -0,0 +1,18 @@ +Mediatek MT6358 Audio Codec + +The communication between MT6358 and SoC is through Mediatek PMIC wrapper. +For more detail, please visit Mediatek PMIC wrapper documentation. + +Must be a child node of PMIC wrapper. + +Required properties: + +- compatible : "mediatek,mt6358-sound". +- Avdd-supply : power source of AVDD + +Example: + +mt6358_snd { + compatible = "mediatek,mt6358-sound"; + Avdd-supply = <&mt6358_vaud28_reg>; +}; diff --git a/dts/Bindings/sound/mt8183-afe-pcm.txt b/dts/Bindings/sound/mt8183-afe-pcm.txt new file mode 100644 index 0000000000..396ba38619 --- /dev/null +++ b/dts/Bindings/sound/mt8183-afe-pcm.txt @@ -0,0 +1,36 @@ +Mediatek AFE PCM controller for mt8183 + +Required properties: +- compatible = "mediatek,mt68183-audio"; +- reg: register location and size +- interrupts: should contain AFE interrupt +- power-domains: should define the power domain +- clocks: Must contain an entry for each entry in clock-names +- clock-names: should have these clock names: + "infra_sys_audio_clk", + "mtkaif_26m_clk", + "top_mux_audio", + "top_mux_aud_intbus", + "top_sys_pll3_d4", + "top_clk26m_clk"; + +Example: + + afe: mt8183-afe-pcm@11220000 { + compatible = "mediatek,mt8183-audio"; + reg = <0 0x11220000 0 0x1000>; + interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&scpsys MT8183_POWER_DOMAIN_AUDIO>; + clocks = <&infrasys CLK_INFRA_AUDIO>, + <&infrasys CLK_INFRA_AUDIO_26M_BCLK>, + <&topckgen CLK_TOP_MUX_AUDIO>, + <&topckgen CLK_TOP_MUX_AUD_INTBUS>, + <&topckgen CLK_TOP_SYSPLL_D2_D4>, + <&clk26m>; + clock-names = "infra_sys_audio_clk", + "mtkaif_26m_clk", + "top_mux_audio", + "top_mux_aud_intbus", + "top_sys_pll_d2_d4", + "top_clk26m_clk"; + }; diff --git a/dts/Bindings/sound/mtk-btcvsd-snd.txt b/dts/Bindings/sound/mtk-btcvsd-snd.txt new file mode 100644 index 0000000000..679e44839b --- /dev/null +++ b/dts/Bindings/sound/mtk-btcvsd-snd.txt @@ -0,0 +1,24 @@ +Mediatek ALSA BT SCO CVSD/MSBC Driver + +Required properties: +- compatible = "mediatek,mtk-btcvsd-snd"; +- reg: register location and size of PKV and SRAM_BANK2 +- interrupts: should contain BTSCO interrupt +- mediatek,infracfg: the phandles of INFRASYS +- mediatek,offset: Array contains of register offset and mask + infra_misc_offset, + infra_conn_bt_cvsd_mask, + cvsd_mcu_read_offset, + cvsd_mcu_write_offset, + cvsd_packet_indicator_offset + +Example: + + mtk-btcvsd-snd@18000000 { + compatible = "mediatek,mtk-btcvsd-snd"; + reg=<0 0x18000000 0 0x1000>, + <0 0x18080000 0 0x8000>; + interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_LOW>; + mediatek,infracfg = <&infrasys>; + mediatek,offset = <0xf00 0x800 0xfd0 0xfd4 0xfd8>; + }; diff --git a/dts/Bindings/sound/nvidia,tegra30-hda.txt b/dts/Bindings/sound/nvidia,tegra30-hda.txt index 44d27456e8..21cd310963 100644 --- a/dts/Bindings/sound/nvidia,tegra30-hda.txt +++ b/dts/Bindings/sound/nvidia,tegra30-hda.txt @@ -13,6 +13,10 @@ Required properties: See ../reset/reset.txt for details. - reset-names : Must include the following entries: hda, hda2hdmi, hda2codec_2x +Optional properties: +- nvidia,model : The user-visible name of this sound complex. Since the property + is optional, legacy boards can use default name provided in hda driver. + Example: hda@70030000 { @@ -27,4 +31,5 @@ hda@70030000 { <&tegra_car 128>, /* hda2hdmi */ <&tegra_car 111>; /* hda2codec_2x */ reset-names = "hda", "hda2hdmi", "hda2codec_2x"; + nvidia,model = "jetson-tk1-hda"; }; diff --git a/dts/Bindings/sound/qcom,msm8916-wcd-analog.txt b/dts/Bindings/sound/qcom,msm8916-wcd-analog.txt index fdcea3d12e..e7d17dda55 100644 --- a/dts/Bindings/sound/qcom,msm8916-wcd-analog.txt +++ b/dts/Bindings/sound/qcom,msm8916-wcd-analog.txt @@ -30,6 +30,7 @@ Required properties - vdd-cdc-io-supply: phandle to VDD_CDC_IO regulator DT node. - vdd-cdc-tx-rx-cx-supply: phandle to VDD_CDC_TX/RX/CX regulator DT node. - vdd-micbias-supply: phandle of VDD_MICBIAS supply's regulator DT node. + Optional Properties: - qcom,mbhc-vthreshold-low: Array of 5 threshold voltages in mV for 5 buttons detection on headset when the mbhc is powered up @@ -92,9 +93,9 @@ spmi_bus { "cdc_ear_cnp_int", "cdc_hphr_cnp_int", "cdc_hphl_cnp_int"; - VDD-CDC-IO-supply = <&pm8916_l5>; - VDD-CDC-TX-RX-CX-supply = <&pm8916_l5>; - VDD-MICBIAS-supply = <&pm8916_l13>; + vdd-cdc-io-supply = <&pm8916_l5>; + vdd-cdc-tx-rx-cx-supply = <&pm8916_l5>; + vdd-micbias-supply = <&pm8916_l13>; #sound-dai-cells = <1>; }; }; diff --git a/dts/Bindings/sound/qcom,wcd9335.txt b/dts/Bindings/sound/qcom,wcd9335.txt index 1d8d49e30a..5d6ea66a86 100644 --- a/dts/Bindings/sound/qcom,wcd9335.txt +++ b/dts/Bindings/sound/qcom,wcd9335.txt @@ -34,12 +34,12 @@ Required properties with SLIMbus Interface: Definition: Interrupt names of WCD INTR1 and INTR2 Should be: "intr1", "intr2" -- reset-gpio: +- reset-gpios: Usage: required Value type: <String Array> Definition: Reset gpio line -- qcom,ifd: +- slim-ifc-dev: Usage: required Value type: <phandle> Definition: SLIM interface device @@ -104,13 +104,13 @@ Required properties with SLIMbus Interface: Value type: <u32> Definition: Must be 1 -codec@1{ +audio-codec@1{ compatible = "slim217,1a0"; reg = <1 0>; interrupts = <&msmgpio 54 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "intr2" - reset-gpio = <&msmgpio 64 0>; - qcom,ifd = <&wc9335_ifd>; + reset-gpios = <&msmgpio 64 0>; + slim-ifc-dev = <&wc9335_ifd>; clock-names = "mclk", "native"; clocks = <&rpmcc RPM_SMD_DIV_CLK1>, <&rpmcc RPM_SMD_BB_CLK1>; diff --git a/dts/Bindings/sound/rockchip,rk3328-codec.txt b/dts/Bindings/sound/rockchip,rk3328-codec.txt new file mode 100644 index 0000000000..2469588c7c --- /dev/null +++ b/dts/Bindings/sound/rockchip,rk3328-codec.txt @@ -0,0 +1,23 @@ +* Rockchip Rk3328 internal codec + +Required properties: + +- compatible: "rockchip,rk3328-codec" +- reg: physical base address of the controller and length of memory mapped + region. +- rockchip,grf: the phandle of the syscon node for GRF register. +- clocks: a list of phandle + clock-specifer pairs, one for each entry in clock-names. +- clock-names: should be "pclk". +- spk-depop-time-ms: speak depop time msec. + +Example for rk3328 internal codec: + +codec: codec@ff410000 { + compatible = "rockchip,rk3328-codec"; + reg = <0x0 0xff410000 0x0 0x1000>; + rockchip,grf = <&grf>; + clocks = <&cru PCLK_ACODEC>; + clock-names = "pclk"; + spk-depop-time-ms = 100; + status = "disabled"; +}; diff --git a/dts/Bindings/sound/sgtl5000.txt b/dts/Bindings/sound/sgtl5000.txt index 9c58f72439..9d9ff51849 100644 --- a/dts/Bindings/sound/sgtl5000.txt +++ b/dts/Bindings/sound/sgtl5000.txt @@ -37,6 +37,15 @@ VDDIO 1.8V 2.5V 3.3V 2 = 3.33 mA 5.74 mA 8.03 mA 3 = 4.99 mA 8.61 mA 12.05 mA +- sclk-strength: the SCLK pad strength. Possible values are: +0, 1, 2 and 3 as per the table below: + +VDDIO 1.8V 2.5V 3.3V +0 = Disable +1 = 1.66 mA 2.87 mA 4.02 mA +2 = 3.33 mA 5.74 mA 8.03 mA +3 = 4.99 mA 8.61 mA 12.05 mA + Example: sgtl5000: codec@a { diff --git a/dts/Bindings/sound/simple-scu-card.txt b/dts/Bindings/sound/simple-scu-card.txt deleted file mode 100644 index 3a2f71616c..0000000000 --- a/dts/Bindings/sound/simple-scu-card.txt +++ /dev/null @@ -1,94 +0,0 @@ -ASoC Simple SCU Sound Card - -Simple SCU Sound Card is "Simple Sound Card" + "ALSA DPCM". -For example, you can use this driver if you want to exchange sampling rate convert, -Mixing, etc... - -Required properties: - -- compatible : "simple-scu-audio-card" - "renesas,rsrc-card" -Optional properties: - -- simple-audio-card,name : see simple-audio-card.txt -- simple-audio-card,cpu : see simple-audio-card.txt -- simple-audio-card,codec : see simple-audio-card.txt - -Optional subnode properties: - -- simple-audio-card,format : see simple-audio-card.txt -- simple-audio-card,frame-master : see simple-audio-card.txt -- simple-audio-card,bitclock-master : see simple-audio-card.txt -- simple-audio-card,bitclock-inversion : see simple-audio-card.txt -- simple-audio-card,frame-inversion : see simple-audio-card.txt -- simple-audio-card,convert-rate : platform specified sampling rate convert -- simple-audio-card,convert-channels : platform specified converted channel size (2 - 8 ch) -- simple-audio-card,prefix : see routing -- simple-audio-card,widgets : Please refer to widgets.txt. -- simple-audio-card,routing : A list of the connections between audio components. - Each entry is a pair of strings, the first being the connection's sink, - the second being the connection's source. Valid names for sources. - use audio-prefix if some components is using same sink/sources naming. - it can be used if compatible was "renesas,rsrc-card"; - -Required CPU/CODEC subnodes properties: - -- sound-dai : see simple-audio-card.txt - -Optional CPU/CODEC subnodes properties: - -- clocks / system-clock-frequency : see simple-audio-card.txt - -Example 1. Sampling Rate Conversion - -sound { - compatible = "simple-scu-audio-card"; - - simple-audio-card,name = "rsnd-ak4643"; - simple-audio-card,format = "left_j"; - simple-audio-card,bitclock-master = <&sndcodec>; - simple-audio-card,frame-master = <&sndcodec>; - - simple-audio-card,convert-rate = <48000>; - - simple-audio-card,prefix = "ak4642"; - simple-audio-card,routing = "ak4642 Playback", "DAI0 Playback", - "DAI0 Capture", "ak4642 Capture"; - - sndcpu: simple-audio-card,cpu { - sound-dai = <&rcar_sound>; - }; - - sndcodec: simple-audio-card,codec { - sound-dai = <&ak4643>; - system-clock-frequency = <11289600>; - }; -}; - -Example 2. 2 CPU 1 Codec (Mixing) - -sound { - compatible = "simple-scu-audio-card"; - - simple-audio-card,name = "rsnd-ak4643"; - simple-audio-card,format = "left_j"; - simple-audio-card,bitclock-master = <&dpcmcpu>; - simple-audio-card,frame-master = <&dpcmcpu>; - - simple-audio-card,routing = "ak4642 Playback", "DAI0 Playback", - "ak4642 Playback", "DAI1 Playback"; - - dpcmcpu: cpu@0 { - sound-dai = <&rcar_sound 0>; - }; - - cpu@1 { - sound-dai = <&rcar_sound 1>; - }; - - codec { - prefix = "ak4642"; - sound-dai = <&ak4643>; - clocks = <&audio_clock>; - }; -}; diff --git a/dts/Bindings/sound/sprd-pcm.txt b/dts/Bindings/sound/sprd-pcm.txt new file mode 100644 index 0000000000..4b23e84b2e --- /dev/null +++ b/dts/Bindings/sound/sprd-pcm.txt @@ -0,0 +1,23 @@ +* Spreadtrum DMA platfrom bindings + +Required properties: +- compatible: Should be "sprd,pcm-platform". +- dmas: Specify the list of DMA controller phandle and DMA request line ordered pairs. +- dma-names: Identifier string for each DMA request line in the dmas property. + These strings correspond 1:1 with the ordered pairs in dmas. + +Example: + + audio_platform:platform@0 { + compatible = "sprd,pcm-platform"; + dmas = <&agcp_dma 1 1>, <&agcp_dma 2 2>, + <&agcp_dma 3 3>, <&agcp_dma 4 4>, + <&agcp_dma 5 5>, <&agcp_dma 6 6>, + <&agcp_dma 7 7>, <&agcp_dma 8 8>, + <&agcp_dma 9 9>, <&agcp_dma 10 10>; + dma-names = "normal_p_l", "normal_p_r", + "normal_c_l", "normal_c_r", + "voice_c", "fast_p", + "loop_c", "loop_p", + "voip_c", "voip_p"; + }; diff --git a/dts/Bindings/sound/xlnx,audio-formatter.txt b/dts/Bindings/sound/xlnx,audio-formatter.txt new file mode 100644 index 0000000000..cbc93c8f49 --- /dev/null +++ b/dts/Bindings/sound/xlnx,audio-formatter.txt @@ -0,0 +1,29 @@ +Device-Tree bindings for Xilinx PL audio formatter + +The IP core supports DMA, data formatting(AES<->PCM conversion) +of audio samples. + +Required properties: + - compatible: "xlnx,audio-formatter-1.0" + - interrupt-names: Names specified to list of interrupts in same + order mentioned under "interrupts". + List of supported interrupt names are: + "irq_mm2s" : interrupt from MM2S block + "irq_s2mm" : interrupt from S2MM block + - interrupts-parent: Phandle for interrupt controller. + - interrupts: List of Interrupt numbers. + - reg: Base address and size of the IP core instance. + - clock-names: List of input clocks. + Required elements: "s_axi_lite_aclk", "aud_mclk" + - clocks: Input clock specifier. Refer to common clock bindings. + +Example: + audio_ss_0_audio_formatter_0: audio_formatter@80010000 { + compatible = "xlnx,audio-formatter-1.0"; + interrupt-names = "irq_mm2s", "irq_s2mm"; + interrupt-parent = <&gic>; + interrupts = <0 104 4>, <0 105 4>; + reg = <0x0 0x80010000 0x0 0x1000>; + clock-names = "s_axi_lite_aclk", "aud_mclk"; + clocks = <&clk 71>, <&clk_wiz_1 0>; + }; diff --git a/dts/Bindings/sound/xlnx,spdif.txt b/dts/Bindings/sound/xlnx,spdif.txt new file mode 100644 index 0000000000..15c2d64d24 --- /dev/null +++ b/dts/Bindings/sound/xlnx,spdif.txt @@ -0,0 +1,28 @@ +Device-Tree bindings for Xilinx SPDIF IP + +The IP supports playback and capture of SPDIF audio + +Required properties: + - compatible: "xlnx,spdif-2.0" + - clock-names: List of input clocks. + Required elements: "s_axi_aclk", "aud_clk_i" + - clocks: Input clock specifier. Refer to common clock bindings. + - reg: Base address and address length of the IP core instance. + - interrupts-parent: Phandle for interrupt controller. + - interrupts: List of Interrupt numbers. + - xlnx,spdif-mode: 0 :- receiver mode + 1 :- transmitter mode + - xlnx,aud_clk_i: input audio clock value. + +Example: + spdif_0: spdif@80010000 { + clock-names = "aud_clk_i", "s_axi_aclk"; + clocks = <&misc_clk_0>, <&clk 71>; + compatible = "xlnx,spdif-2.0"; + interrupt-names = "spdif_interrupt"; + interrupt-parent = <&gic>; + interrupts = <0 91 4>; + reg = <0x0 0x80010000 0x0 0x10000>; + xlnx,spdif-mode = <1>; + xlnx,aud_clk_i = <49152913>; + }; diff --git a/dts/Bindings/spi/atmel-quadspi.txt b/dts/Bindings/spi/atmel-quadspi.txt index b93c1e2f25..7c40ea6943 100644 --- a/dts/Bindings/spi/atmel-quadspi.txt +++ b/dts/Bindings/spi/atmel-quadspi.txt @@ -1,14 +1,19 @@ * Atmel Quad Serial Peripheral Interface (QSPI) Required properties: -- compatible: Should be "atmel,sama5d2-qspi". +- compatible: Should be one of the following: + - "atmel,sama5d2-qspi" + - "microchip,sam9x60-qspi" - reg: Should contain the locations and lengths of the base registers and the mapped memory. - reg-names: Should contain the resource reg names: - qspi_base: configuration register address space - qspi_mmap: memory mapped address space - interrupts: Should contain the interrupt for the device. -- clocks: The phandle of the clock needed by the QSPI controller. +- clocks: Should reference the peripheral clock and the QSPI system + clock if available. +- clock-names: Should contain "pclk" for the peripheral clock and "qspick" + for the system clock when available. - #address-cells: Should be <1>. - #size-cells: Should be <0>. @@ -19,7 +24,8 @@ spi@f0020000 { reg = <0xf0020000 0x100>, <0xd0000000 0x8000000>; reg-names = "qspi_base", "qspi_mmap"; interrupts = <52 IRQ_TYPE_LEVEL_HIGH 7>; - clocks = <&spi0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 52>; + clock-names = "pclk"; #address-cells = <1>; #size-cells = <0>; pinctrl-names = "default"; diff --git a/dts/Bindings/spi/fsl-imx-cspi.txt b/dts/Bindings/spi/fsl-imx-cspi.txt index e3c48b20b1..2d3264140c 100644 --- a/dts/Bindings/spi/fsl-imx-cspi.txt +++ b/dts/Bindings/spi/fsl-imx-cspi.txt @@ -10,6 +10,7 @@ Required properties: - "fsl,imx35-cspi" for SPI compatible with the one integrated on i.MX35 - "fsl,imx51-ecspi" for SPI compatible with the one integrated on i.MX51 - "fsl,imx53-ecspi" for SPI compatible with the one integrated on i.MX53 and later Soc + - "fsl,imx8mq-ecspi" for SPI compatible with the one integrated on i.MX8M - reg : Offset and length of the register set for the device - interrupts : Should contain CSPI/eCSPI interrupt - clocks : Clock specifiers for both ipg and per clocks. diff --git a/dts/Bindings/mtd/fsl-quadspi.txt b/dts/Bindings/spi/spi-fsl-qspi.txt index 483e9cfac1..e8f1d627d2 100644 --- a/dts/Bindings/mtd/fsl-quadspi.txt +++ b/dts/Bindings/spi/spi-fsl-qspi.txt @@ -14,15 +14,13 @@ Required properties: - clocks : The clocks needed by the QuadSPI controller - clock-names : Should contain the name of the clocks: "qspi_en" and "qspi". -Optional properties: - - fsl,qspi-has-second-chip: The controller has two buses, bus A and bus B. - Each bus can be connected with two NOR flashes. - Most of the time, each bus only has one NOR flash - connected, this is the default case. - But if there are two NOR flashes connected to the - bus, you should enable this property. - (Please check the board's schematic.) - - big-endian : That means the IP register is big endian +Required SPI slave node properties: + - reg: There are two buses (A and B) with two chip selects each. + This encodes to which bus and CS the flash is connected: + <0>: Bus A, CS 0 + <1>: Bus A, CS 1 + <2>: Bus B, CS 0 + <3>: Bus B, CS 1 Example: @@ -40,7 +38,7 @@ qspi0: quadspi@40044000 { }; }; -Example showing the usage of two SPI NOR devices: +Example showing the usage of two SPI NOR devices on bus A: &qspi2 { pinctrl-names = "default"; diff --git a/dts/Bindings/spi/spi-nxp-fspi.txt b/dts/Bindings/spi/spi-nxp-fspi.txt new file mode 100644 index 0000000000..2cd67eb727 --- /dev/null +++ b/dts/Bindings/spi/spi-nxp-fspi.txt @@ -0,0 +1,39 @@ +* NXP Flex Serial Peripheral Interface (FSPI) + +Required properties: + - compatible : Should be "nxp,lx2160a-fspi" + - reg : First contains the register location and length, + Second contains the memory mapping address and length + - reg-names : Should contain the resource reg names: + - fspi_base: configuration register address space + - fspi_mmap: memory mapped address space + - interrupts : Should contain the interrupt for the device + +Required SPI slave node properties: + - reg : There are two buses (A and B) with two chip selects each. + This encodes to which bus and CS the flash is connected: + - <0>: Bus A, CS 0 + - <1>: Bus A, CS 1 + - <2>: Bus B, CS 0 + - <3>: Bus B, CS 1 + +Example showing the usage of two SPI NOR slave devices on bus A: + +fspi0: spi@20c0000 { + compatible = "nxp,lx2160a-fspi"; + reg = <0x0 0x20c0000 0x0 0x10000>, <0x0 0x20000000 0x0 0x10000000>; + reg-names = "fspi_base", "fspi_mmap"; + interrupts = <0 25 0x4>; /* Level high type */ + clocks = <&clockgen 4 3>, <&clockgen 4 3>; + clock-names = "fspi_en", "fspi"; + + mt35xu512aba0: flash@0 { + reg = <0>; + .... + }; + + mt35xu512aba1: flash@1 { + reg = <1>; + .... + }; +}; diff --git a/dts/Bindings/spi/spi-sifive.txt b/dts/Bindings/spi/spi-sifive.txt new file mode 100644 index 0000000000..3f5c6e4389 --- /dev/null +++ b/dts/Bindings/spi/spi-sifive.txt @@ -0,0 +1,37 @@ +SiFive SPI controller Device Tree Bindings +------------------------------------------ + +Required properties: +- compatible : Should be "sifive,<chip>-spi" and "sifive,spi<version>". + Supported compatible strings are: + "sifive,fu540-c000-spi" for the SiFive SPI v0 as integrated + onto the SiFive FU540 chip, and "sifive,spi0" for the SiFive + SPI v0 IP block with no chip integration tweaks. + Please refer to sifive-blocks-ip-versioning.txt for details +- reg : Physical base address and size of SPI registers map + A second (optional) range can indicate memory mapped flash +- interrupts : Must contain one entry +- interrupt-parent : Must be core interrupt controller +- clocks : Must reference the frequency given to the controller +- #address-cells : Must be '1', indicating which CS to use +- #size-cells : Must be '0' + +Optional properties: +- sifive,fifo-depth : Depth of hardware queues; defaults to 8 +- sifive,max-bits-per-word : Maximum bits per word; defaults to 8 + +SPI RTL that corresponds to the IP block version numbers can be found here: +https://github.com/sifive/sifive-blocks/tree/master/src/main/scala/devices/spi + +Example: + spi: spi@10040000 { + compatible = "sifive,fu540-c000-spi", "sifive,spi0"; + reg = <0x0 0x10040000 0x0 0x1000 0x0 0x20000000 0x0 0x10000000>; + interrupt-parent = <&plic>; + interrupts = <51>; + clocks = <&tlclk>; + #address-cells = <1>; + #size-cells = <0>; + sifive,fifo-depth = <8>; + sifive,max-bits-per-word = <8>; + }; diff --git a/dts/Bindings/spi/spi-sprd.txt b/dts/Bindings/spi/spi-sprd.txt index bad211a19d..3c7eacce0e 100644 --- a/dts/Bindings/spi/spi-sprd.txt +++ b/dts/Bindings/spi/spi-sprd.txt @@ -14,6 +14,11 @@ Required properties: address on the SPI bus. Should be set to 1. - #size-cells: Should be set to 0. +Optional properties: +dma-names: Should contain names of the SPI used DMA channel. +dmas: Should contain DMA channels and DMA slave ids which the SPI used + sorted in the same order as the dma-names property. + Example: spi0: spi@70a00000{ compatible = "sprd,sc9860-spi"; @@ -21,6 +26,8 @@ spi0: spi@70a00000{ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; clock-names = "spi", "source","enable"; clocks = <&clk_spi0>, <&ext_26m>, <&clk_ap_apb_gates 5>; + dma-names = "rx_chn", "tx_chn"; + dmas = <&apdma 11 11>, <&apdma 12 12>; #address-cells = <1>; #size-cells = <0>; }; diff --git a/dts/Bindings/spi/spi-stm32.txt b/dts/Bindings/spi/spi-stm32.txt index 1b3fa2c119..d82755c63e 100644 --- a/dts/Bindings/spi/spi-stm32.txt +++ b/dts/Bindings/spi/spi-stm32.txt @@ -7,7 +7,9 @@ from 4 to 32-bit data size. Although it can be configured as master or slave, only master is supported by the driver. Required properties: -- compatible: Must be "st,stm32h7-spi". +- compatible: Should be one of: + "st,stm32h7-spi" + "st,stm32f4-spi" - reg: Offset and length of the device's register set. - interrupts: Must contain the interrupt id. - clocks: Must contain an entry for spiclk (which feeds the internal clock @@ -30,8 +32,9 @@ Child nodes represent devices on the SPI bus See ../spi/spi-bus.txt Optional properties: -- st,spi-midi-ns: (Master Inter-Data Idleness) minimum time delay in - nanoseconds inserted between two consecutive data frames. +- st,spi-midi-ns: Only for STM32H7, (Master Inter-Data Idleness) minimum time + delay in nanoseconds inserted between two consecutive data + frames. Example: diff --git a/dts/Bindings/sram/milbeaut-smp-sram.txt b/dts/Bindings/sram/milbeaut-smp-sram.txt new file mode 100644 index 0000000000..194f6a3c1c --- /dev/null +++ b/dts/Bindings/sram/milbeaut-smp-sram.txt @@ -0,0 +1,24 @@ +Milbeaut SRAM for smp bringup + +Milbeaut SoCs use a part of the sram for the bringup of the secondary cores. +Once they get powered up in the bootloader, they stay at the specific part +of the sram. +Therefore the part needs to be added as the sub-node of mmio-sram. + +Required sub-node properties: +- compatible : should be "socionext,milbeaut-smp-sram" + +Example: + + sram: sram@0 { + compatible = "mmio-sram"; + reg = <0x0 0x10000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x0 0x10000>; + + smp-sram@f100 { + compatible = "socionext,milbeaut-smp-sram"; + reg = <0xf100 0x20>; + }; + }; diff --git a/dts/Bindings/sram/sunxi-sram.txt b/dts/Bindings/sram/sunxi-sram.txt index ab5a70bb9a..380246a805 100644 --- a/dts/Bindings/sram/sunxi-sram.txt +++ b/dts/Bindings/sram/sunxi-sram.txt @@ -63,6 +63,7 @@ The valid sections compatible for H5 are: The valid sections compatible for H6 are: - allwinner,sun50i-h6-sram-c, allwinner,sun50i-a64-sram-c + - allwinner,sun50i-h6-sram-c1, allwinner,sun4i-a10-sram-c1 The valid sections compatible for F1C100s are: - allwinner,suniv-f1c100s-sram-d, allwinner,sun4i-a10-sram-d diff --git a/dts/Bindings/thermal/brcm,sr-thermal.txt b/dts/Bindings/thermal/brcm,sr-thermal.txt new file mode 100644 index 0000000000..3ab330219d --- /dev/null +++ b/dts/Bindings/thermal/brcm,sr-thermal.txt @@ -0,0 +1,105 @@ +* Broadcom Stingray Thermal + +This binding describes thermal sensors that is part of Stingray SoCs. + +Required properties: +- compatible : Must be "brcm,sr-thermal" +- reg : Memory where tmon data will be available. +- brcm,tmon-mask: A one cell bit mask of valid TMON sources. + Each bit represents single TMON source. +- #thermal-sensor-cells : Thermal sensor phandler +- polling-delay: Max number of milliseconds to wait between polls. +- thermal-sensors: A list of thermal sensor phandles and specifier. + specifier value is tmon ID and it should be + in correspond with brcm,tmon-mask. +- temperature: trip temperature threshold in millicelsius. + +Example: + tmons { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x8f100000 0x100>; + + tmon: tmon@0 { + compatible = "brcm,sr-thermal"; + reg = <0x0 0x40>; + brcm,tmon-mask = <0x3f>; + #thermal-sensor-cells = <1>; + }; + }; + + thermal-zones { + ihost0_thermal: ihost0-thermal { + polling-delay-passive = <0>; + polling-delay = <1000>; + thermal-sensors = <&tmon 0>; + trips { + cpu-crit { + temperature = <105000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + ihost1_thermal: ihost1-thermal { + polling-delay-passive = <0>; + polling-delay = <1000>; + thermal-sensors = <&tmon 1>; + trips { + cpu-crit { + temperature = <105000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + ihost2_thermal: ihost2-thermal { + polling-delay-passive = <0>; + polling-delay = <1000>; + thermal-sensors = <&tmon 2>; + trips { + cpu-crit { + temperature = <105000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + ihost3_thermal: ihost3-thermal { + polling-delay-passive = <0>; + polling-delay = <1000>; + thermal-sensors = <&tmon 3>; + trips { + cpu-crit { + temperature = <105000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + crmu_thermal: crmu-thermal { + polling-delay-passive = <0>; + polling-delay = <1000>; + thermal-sensors = <&tmon 4>; + trips { + cpu-crit { + temperature = <105000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + nitro_thermal: nitro-thermal { + polling-delay-passive = <0>; + polling-delay = <1000>; + thermal-sensors = <&tmon 5>; + trips { + cpu-crit { + temperature = <105000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; diff --git a/dts/Bindings/thermal/mediatek-thermal.txt b/dts/Bindings/thermal/mediatek-thermal.txt index 41d6a443ad..f8d7831f39 100644 --- a/dts/Bindings/thermal/mediatek-thermal.txt +++ b/dts/Bindings/thermal/mediatek-thermal.txt @@ -13,6 +13,7 @@ Required properties: - "mediatek,mt2701-thermal" : For MT2701 family of SoCs - "mediatek,mt2712-thermal" : For MT2712 family of SoCs - "mediatek,mt7622-thermal" : For MT7622 SoC + - "mediatek,mt8183-thermal" : For MT8183 family of SoCs - reg: Address range of the thermal controller - interrupts: IRQ for the thermal controller - clocks, clock-names: Clocks needed for the thermal controller. required diff --git a/dts/Bindings/timer/fsl,imxgpt.txt b/dts/Bindings/timer/fsl,imxgpt.txt index 9809b11f71..5d8fd5b525 100644 --- a/dts/Bindings/timer/fsl,imxgpt.txt +++ b/dts/Bindings/timer/fsl,imxgpt.txt @@ -2,17 +2,44 @@ Freescale i.MX General Purpose Timer (GPT) Required properties: -- compatible : should be "fsl,<soc>-gpt" -- reg : Specifies base physical address and size of the registers. -- interrupts : A list of 4 interrupts; one per timer channel. -- clocks : The clocks provided by the SoC to drive the timer. +- compatible : should be one of following: + for i.MX1: + - "fsl,imx1-gpt"; + for i.MX21: + - "fsl,imx21-gpt"; + for i.MX27: + - "fsl,imx27-gpt", "fsl,imx21-gpt"; + for i.MX31: + - "fsl,imx31-gpt"; + for i.MX25: + - "fsl,imx25-gpt", "fsl,imx31-gpt"; + for i.MX50: + - "fsl,imx50-gpt", "fsl,imx31-gpt"; + for i.MX51: + - "fsl,imx51-gpt", "fsl,imx31-gpt"; + for i.MX53: + - "fsl,imx53-gpt", "fsl,imx31-gpt"; + for i.MX6Q: + - "fsl,imx6q-gpt", "fsl,imx31-gpt"; + for i.MX6DL: + - "fsl,imx6dl-gpt"; + for i.MX6SL: + - "fsl,imx6sl-gpt", "fsl,imx6dl-gpt"; + for i.MX6SX: + - "fsl,imx6sx-gpt", "fsl,imx6dl-gpt"; +- reg : specifies base physical address and size of the registers. +- interrupts : should be the gpt interrupt. +- clocks : the clocks provided by the SoC to drive the timer, must contain + an entry for each entry in clock-names. +- clock-names : must include "ipg" entry first, then "per" entry. Example: gpt1: timer@10003000 { - compatible = "fsl,imx27-gpt", "fsl,imx1-gpt"; + compatible = "fsl,imx27-gpt", "fsl,imx21-gpt"; reg = <0x10003000 0x1000>; interrupts = <26>; - clocks = <&clks 46>, <&clks 61>; + clocks = <&clks IMX27_CLK_GPT1_IPG_GATE>, + <&clks IMX27_CLK_PER1_GATE>; clock-names = "ipg", "per"; }; diff --git a/dts/Bindings/timer/mediatek,mtk-timer.txt b/dts/Bindings/timer/mediatek,mtk-timer.txt index 18d4d0166c..ff7c567a79 100644 --- a/dts/Bindings/timer/mediatek,mtk-timer.txt +++ b/dts/Bindings/timer/mediatek,mtk-timer.txt @@ -1,7 +1,7 @@ -Mediatek Timers +MediaTek Timers --------------- -Mediatek SoCs have two different timers on different platforms, +MediaTek SoCs have two different timers on different platforms, - GPT (General Purpose Timer) - SYST (System Timer) @@ -9,6 +9,7 @@ The proper timer will be selected automatically by driver. Required properties: - compatible should contain: + For those SoCs that use GPT * "mediatek,mt2701-timer" for MT2701 compatible timers (GPT) * "mediatek,mt6580-timer" for MT6580 compatible timers (GPT) * "mediatek,mt6589-timer" for MT6589 compatible timers (GPT) @@ -17,7 +18,11 @@ Required properties: * "mediatek,mt8135-timer" for MT8135 compatible timers (GPT) * "mediatek,mt8173-timer" for MT8173 compatible timers (GPT) * "mediatek,mt6577-timer" for MT6577 and all above compatible timers (GPT) - * "mediatek,mt6765-timer" for MT6765 compatible timers (SYST) + + For those SoCs that use SYST + * "mediatek,mt7629-timer" for MT7629 compatible timers (SYST) + * "mediatek,mt6765-timer" for MT6765 and all above compatible timers (SYST) + - reg: Should contain location and length for timer register. - clocks: Should contain system clock. diff --git a/dts/Bindings/timer/nvidia,tegra210-timer.txt b/dts/Bindings/timer/nvidia,tegra210-timer.txt new file mode 100644 index 0000000000..032cda96fe --- /dev/null +++ b/dts/Bindings/timer/nvidia,tegra210-timer.txt @@ -0,0 +1,36 @@ +NVIDIA Tegra210 timer + +The Tegra210 timer provides fourteen 29-bit timer counters and one 32-bit +timestamp counter. The TMRs run at either a fixed 1 MHz clock rate derived +from the oscillator clock (TMR0-TMR9) or directly at the oscillator clock +(TMR10-TMR13). Each TMR can be programmed to generate one-shot, periodic, +or watchdog interrupts. + +Required properties: +- compatible : "nvidia,tegra210-timer". +- reg : Specifies base physical address and size of the registers. +- interrupts : A list of 14 interrupts; one per each timer channels 0 through + 13. +- clocks : Must contain one entry, for the module clock. + See ../clocks/clock-bindings.txt for details. + +timer@60005000 { + compatible = "nvidia,tegra210-timer"; + reg = <0x0 0x60005000 0x0 0x400>; + interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA210_CLK_TIMER>; + clock-names = "timer"; +}; diff --git a/dts/Bindings/timer/renesas,cmt.txt b/dts/Bindings/timer/renesas,cmt.txt index 862a80f038..c0594450e9 100644 --- a/dts/Bindings/timer/renesas,cmt.txt +++ b/dts/Bindings/timer/renesas,cmt.txt @@ -32,6 +32,8 @@ Required Properties: - "renesas,r8a77470-cmt1" for the 48-bit CMT1 device included in r8a77470. - "renesas,r8a774a1-cmt0" for the 32-bit CMT0 device included in r8a774a1. - "renesas,r8a774a1-cmt1" for the 48-bit CMT1 device included in r8a774a1. + - "renesas,r8a774c0-cmt0" for the 32-bit CMT0 device included in r8a774c0. + - "renesas,r8a774c0-cmt1" for the 48-bit CMT1 device included in r8a774c0. - "renesas,r8a7790-cmt0" for the 32-bit CMT0 device included in r8a7790. - "renesas,r8a7790-cmt1" for the 48-bit CMT1 device included in r8a7790. - "renesas,r8a7791-cmt0" for the 32-bit CMT0 device included in r8a7791. diff --git a/dts/Bindings/timer/renesas,tmu.txt b/dts/Bindings/timer/renesas,tmu.txt index 4ddff85837..13ad07416b 100644 --- a/dts/Bindings/timer/renesas,tmu.txt +++ b/dts/Bindings/timer/renesas,tmu.txt @@ -10,6 +10,7 @@ Required Properties: - compatible: must contain one or more of the following: - "renesas,tmu-r8a7740" for the r8a7740 TMU + - "renesas,tmu-r8a774c0" for the r8a774C0 TMU - "renesas,tmu-r8a7778" for the r8a7778 TMU - "renesas,tmu-r8a7779" for the r8a7779 TMU - "renesas,tmu-r8a77970" for the r8a77970 TMU diff --git a/dts/Bindings/timer/socionext,milbeaut-timer.txt b/dts/Bindings/timer/socionext,milbeaut-timer.txt new file mode 100644 index 0000000000..ac44c4b675 --- /dev/null +++ b/dts/Bindings/timer/socionext,milbeaut-timer.txt @@ -0,0 +1,17 @@ +Milbeaut SoCs Timer Controller + +Required properties: + +- compatible : should be "socionext,milbeaut-timer". +- reg : Specifies base physical address and size of the registers. +- interrupts : The interrupt of the first timer. +- clocks: phandle to the input clk. + +Example: + +timer { + compatible = "socionext,milbeaut-timer"; + reg = <0x1e000050 0x20> + interrupts = <0 91 4>; + clocks = <&clk 4>; +}; diff --git a/dts/Bindings/trivial-devices.yaml b/dts/Bindings/trivial-devices.yaml index cc64ec63a6..d79fb22bde 100644 --- a/dts/Bindings/trivial-devices.yaml +++ b/dts/Bindings/trivial-devices.yaml @@ -322,6 +322,8 @@ properties: - ti,ads7830 # Temperature Monitoring and Fan Control - ti,amc6821 + # Temperature sensor with integrated fan control + - ti,lm96000 # I2C Touch-Screen Controller - ti,tsc2003 # Low Power Digital Temperature Sensor with SMBUS/Two Wire Serial Interface diff --git a/dts/Bindings/ufs/ufs-hisi.txt b/dts/Bindings/ufs/ufs-hisi.txt index a48c448173..0b83df1a54 100644 --- a/dts/Bindings/ufs/ufs-hisi.txt +++ b/dts/Bindings/ufs/ufs-hisi.txt @@ -6,9 +6,10 @@ Each UFS Host Controller should have its own node. Required properties: - compatible : compatible list, contains one of the following - "hisilicon,hi3660-ufs", "jedec,ufs-1.1" for hisi ufs - host controller present on Hi36xx chipset. + host controller present on Hi3660 chipset. + "hisilicon,hi3670-ufs", "jedec,ufs-2.1" for hisi ufs + host controller present on Hi3670 chipset. - reg : should contain UFS register address space & UFS SYS CTRL register address, -- interrupt-parent : interrupt device - interrupts : interrupt number - clocks : List of phandle and clock specifier pairs - clock-names : List of clock input name strings sorted in the same diff --git a/dts/Bindings/ufs/ufshcd-pltfrm.txt b/dts/Bindings/ufs/ufshcd-pltfrm.txt index 8cf59452c6..5111e9130b 100644 --- a/dts/Bindings/ufs/ufshcd-pltfrm.txt +++ b/dts/Bindings/ufs/ufshcd-pltfrm.txt @@ -4,11 +4,14 @@ UFSHC nodes are defined to describe on-chip UFS host controllers. Each UFS controller instance should have its own node. Required properties: -- compatible : must contain "jedec,ufs-1.1" or "jedec,ufs-2.0", may - also list one or more of the following: - "qcom,msm8994-ufshc" - "qcom,msm8996-ufshc" - "qcom,ufshc" +- compatible : must contain "jedec,ufs-1.1" or "jedec,ufs-2.0" + + For Qualcomm SoCs must contain, as below, an + SoC-specific compatible along with "qcom,ufshc" and + the appropriate jedec string: + "qcom,msm8994-ufshc", "qcom,ufshc", "jedec,ufs-2.0" + "qcom,msm8996-ufshc", "qcom,ufshc", "jedec,ufs-2.0" + "qcom,sdm845-ufshc", "qcom,ufshc", "jedec,ufs-2.0" - interrupts : <interrupt mapping for UFS host controller IRQ> - reg : <registers mapping> diff --git a/dts/Bindings/usb/ci-hdrc-usb2.txt b/dts/Bindings/usb/ci-hdrc-usb2.txt index adae82385d..a254386a91 100644 --- a/dts/Bindings/usb/ci-hdrc-usb2.txt +++ b/dts/Bindings/usb/ci-hdrc-usb2.txt @@ -93,6 +93,7 @@ i.mx specific properties - over-current-active-low: over current signal polarity is active low. - over-current-active-high: over current signal polarity is active high. It's recommended to specify the over current polarity. +- power-active-high: power signal polarity is active high - external-vbus-divider: enables off-chip resistor divider for Vbus Example: diff --git a/dts/Bindings/usb/ingenic,jz4740-musb.txt b/dts/Bindings/usb/ingenic,jz4740-musb.txt new file mode 100644 index 0000000000..620355cee6 --- /dev/null +++ b/dts/Bindings/usb/ingenic,jz4740-musb.txt @@ -0,0 +1,24 @@ +Ingenic JZ4740 MUSB driver + +Required properties: + +- compatible: Must be "ingenic,jz4740-musb" +- reg: Address range of the UDC register set +- interrupts: IRQ number related to the UDC hardware +- interrupt-names: must be "mc" +- clocks: phandle to the "udc" clock +- clock-names: must be "udc" + +Example: + +udc: usb@13040000 { + compatible = "ingenic,jz4740-musb"; + reg = <0x13040000 0x10000>; + + interrupt-parent = <&intc>; + interrupts = <24>; + interrupt-names = "mc"; + + clocks = <&cgu JZ4740_CLK_UDC>; + clock-names = "udc"; +}; diff --git a/dts/Bindings/usb/keystone-usb.txt b/dts/Bindings/usb/keystone-usb.txt index f96e09f784..77df82e361 100644 --- a/dts/Bindings/usb/keystone-usb.txt +++ b/dts/Bindings/usb/keystone-usb.txt @@ -3,7 +3,9 @@ TI Keystone Soc USB Controller DWC3 GLUE Required properties: - - compatible: should be "ti,keystone-dwc3". + - compatible: should be + "ti,keystone-dwc3" for Keystone 2 SoCs + "ti,am654-dwc3" for AM654 SoC - #address-cells, #size-cells : should be '1' if the device has sub-nodes with 'reg' property. - reg : Address and length of the register set for the USB subsystem on @@ -21,7 +23,7 @@ SoCs only: - clock-names: Must be "usb". -The following are mandatory properties for Keystone 2 66AK2G SoCs only: +The following are mandatory properties for 66AK2G and AM654: - power-domains: Should contain a phandle to a PM domain provider node and an args specifier containing the USB device id diff --git a/dts/Bindings/usb/qcom,dwc3.txt b/dts/Bindings/usb/qcom,dwc3.txt index 95afdcf3c3..cb695aa3fb 100644 --- a/dts/Bindings/usb/qcom,dwc3.txt +++ b/dts/Bindings/usb/qcom,dwc3.txt @@ -4,6 +4,7 @@ Required properties: - compatible: Compatible list, contains "qcom,dwc3" "qcom,msm8996-dwc3" for msm8996 SOC. + "qcom,msm8998-dwc3" for msm8998 SOC. "qcom,sdm845-dwc3" for sdm845 SOC. - reg: Offset and length of register set for QSCRATCH wrapper - power-domains: specifies a phandle to PM domain provider node diff --git a/dts/Bindings/usb/renesas_usb3.txt b/dts/Bindings/usb/renesas_usb3.txt index d366555166..35039e7205 100644 --- a/dts/Bindings/usb/renesas_usb3.txt +++ b/dts/Bindings/usb/renesas_usb3.txt @@ -3,6 +3,7 @@ Renesas Electronics USB3.0 Peripheral driver Required properties: - compatible: Must contain one of the following: - "renesas,r8a774a1-usb3-peri" + - "renesas,r8a774c0-usb3-peri" - "renesas,r8a7795-usb3-peri" - "renesas,r8a7796-usb3-peri" - "renesas,r8a77965-usb3-peri" diff --git a/dts/Bindings/usb/renesas_usbhs.txt b/dts/Bindings/usb/renesas_usbhs.txt index 90719f5018..d93b6a1504 100644 --- a/dts/Bindings/usb/renesas_usbhs.txt +++ b/dts/Bindings/usb/renesas_usbhs.txt @@ -7,6 +7,7 @@ Required properties: - "renesas,usbhs-r8a7744" for r8a7744 (RZ/G1N) compatible device - "renesas,usbhs-r8a7745" for r8a7745 (RZ/G1E) compatible device - "renesas,usbhs-r8a774a1" for r8a774a1 (RZ/G2M) compatible device + - "renesas,usbhs-r8a774c0" for r8a774c0 (RZ/G2E) compatible device - "renesas,usbhs-r8a7790" for r8a7790 (R-Car H2) compatible device - "renesas,usbhs-r8a7791" for r8a7791 (R-Car M2-W) compatible device - "renesas,usbhs-r8a7792" for r8a7792 (R-Car V2H) compatible device diff --git a/dts/Bindings/usb/usb251xb.txt b/dts/Bindings/usb/usb251xb.txt index 168ff819e8..17915f64b8 100644 --- a/dts/Bindings/usb/usb251xb.txt +++ b/dts/Bindings/usb/usb251xb.txt @@ -64,6 +64,8 @@ Optional properties : - power-on-time-ms : Specifies the time it takes from the time the host initiates the power-on sequence to a port until the port has adequate power. The value is given in ms in a 0 - 510 range (default is 100ms). + - swap-dx-lanes : Specifies the ports which will swap the differential-pair + (D+/D-), default is not-swapped. Examples: usb2512b@2c { @@ -81,4 +83,6 @@ Examples: manufacturer = "Foo"; product = "Foo-Bar"; serial = "1234567890A"; + /* correct misplaced usb connectors on port 1,2 */ + swap-dx-lanes = <1 2>; }; diff --git a/dts/Bindings/vendor-prefixes.txt b/dts/Bindings/vendor-prefixes.txt index 389508584f..8162b0eb4b 100644 --- a/dts/Bindings/vendor-prefixes.txt +++ b/dts/Bindings/vendor-prefixes.txt @@ -24,6 +24,7 @@ amarula Amarula Solutions amazon Amazon.com, Inc. amcc Applied Micro Circuits Corporation (APM, formally AMCC) amd Advanced Micro Devices (AMD), Inc. +amediatech Shenzhen Amediatech Technology Co., Ltd amlogic Amlogic, Inc. ampire Ampire Co., Ltd. ams AMS AG @@ -65,6 +66,7 @@ bticino Bticino International calxeda Calxeda capella Capella Microsystems, Inc cascoda Cascoda, Ltd. +catalyst Catalyst Semiconductor, Inc. cavium Cavium, Inc. cdns Cadence Design Systems Inc. cdtech CDTech(H.K.) Electronics Limited @@ -108,11 +110,13 @@ dongwoon Dongwoon Anatech dptechnics DPTechnics dragino Dragino Technology Co., Limited ea Embedded Artists AB +ebs-systart EBS-SYSTART GmbH ebv EBV Elektronik eckelmann Eckelmann AG edt Emerging Display Technologies eeti eGalax_eMPIA Technology Inc elan Elan Microelectronic Corp. +elgin Elgin S/A. embest Shenzhen Embest Technology Co., Ltd. emlid Emlid, Ltd. emmicro EM Microelectronic @@ -136,11 +140,13 @@ fairphone Fairphone B.V. faraday Faraday Technology Corporation fastrax Fastrax Oy fcs Fairchild Semiconductor +feiyang Shenzhen Fly Young Technology Co.,LTD. firefly Firefly focaltech FocalTech Systems Co.,Ltd friendlyarm Guangzhou FriendlyARM Computer Tech Co., Ltd fsl Freescale Semiconductor fujitsu Fujitsu Ltd. +gateworks Gateworks Corporation gcw Game Consoles Worldwide ge General Electric Company geekbuying GeekBuying @@ -150,6 +156,7 @@ geniatech Geniatech, Inc. giantec Giantec Semiconductor, Inc. giantplus Giantplus Technology Co., Ltd. globalscale Globalscale Technologies, Inc. +globaltop GlobalTop Technology, Inc. gmt Global Mixed-mode Technology, Inc. goodix Shenzhen Huiding Technology Co., Ltd. google Google, Inc. @@ -211,6 +218,7 @@ laird Laird PLC lantiq Lantiq Semiconductor lattice Lattice Semiconductor lego LEGO Systems A/S +lemaker Shenzhen LeMaker Technology Co., Ltd. lenovo Lenovo Group Ltd. lg LG Corporation libretech Shenzhen Libre Technology Co., Ltd @@ -273,6 +281,7 @@ nintendo Nintendo nlt NLT Technologies, Ltd. nokia Nokia nordic Nordic Semiconductor +novtech NovTech, Inc. nutsboard NutsBoard nuvoton Nuvoton Technology Corporation nvd New Vision Display @@ -297,6 +306,7 @@ ovti OmniVision Technologies oxsemi Oxford Semiconductor, Ltd. panasonic Panasonic Corporation parade Parade Technologies Inc. +pda Precision Design Associates, Inc. pericom Pericom Technology Inc. pervasive Pervasive Displays, Inc. phicomm PHICOMM Co., Ltd. @@ -304,6 +314,7 @@ phytec PHYTEC Messtechnik GmbH picochip Picochip Ltd pine64 Pine64 pixcir PIXCIR MICROELECTRONICS Co., Ltd +plantower Plantower Co., Ltd plathome Plat'Home Co., Ltd. plda PLDA plx Broadcom Corporation (formerly PLX Technology) @@ -390,6 +401,7 @@ tcl Toby Churchill Ltd. technexion TechNexion technologic Technologic Systems tempo Tempo Semiconductor +techstar Shenzhen Techstar Electronics Co., Ltd. terasic Terasic Inc. thine THine Electronics, Inc. ti Texas Instruments @@ -430,6 +442,7 @@ vot Vision Optical Technology Co., Ltd. wd Western Digital Corp. wetek WeTek Electronics, limited. wexler Wexler +whwave Shenzhen whwave Electronics, Inc. wi2wi Wi2Wi, Inc. winbond Winbond Electronics corp. winstar Winstar Display Corp. diff --git a/dts/Bindings/watchdog/renesas-wdt.txt b/dts/Bindings/watchdog/renesas-wdt.txt index ef2b97b72e..9f365c1a33 100644 --- a/dts/Bindings/watchdog/renesas-wdt.txt +++ b/dts/Bindings/watchdog/renesas-wdt.txt @@ -8,6 +8,7 @@ Required properties: - "renesas,r8a7743-wdt" (RZ/G1M) - "renesas,r8a7744-wdt" (RZ/G1N) - "renesas,r8a7745-wdt" (RZ/G1E) + - "renesas,r8a77470-wdt" (RZ/G1C) - "renesas,r8a774a1-wdt" (RZ/G2M) - "renesas,r8a774c0-wdt" (RZ/G2E) - "renesas,r8a7790-wdt" (R-Car H2) diff --git a/dts/Bindings/watchdog/st,stpmic1-wdt.txt b/dts/Bindings/watchdog/st,stpmic1-wdt.txt new file mode 100644 index 0000000000..7cc1407f15 --- /dev/null +++ b/dts/Bindings/watchdog/st,stpmic1-wdt.txt @@ -0,0 +1,11 @@ +STMicroelectronics STPMIC1 Watchdog + +Required properties: + +- compatible : should be "st,stpmic1-wdt" + +Example: + +watchdog { + compatible = "st,stpmic1-wdt"; +}; diff --git a/dts/include/dt-bindings/clk/lochnagar.h b/dts/include/dt-bindings/clk/lochnagar.h new file mode 100644 index 0000000000..8fa20551ff --- /dev/null +++ b/dts/include/dt-bindings/clk/lochnagar.h @@ -0,0 +1,26 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Device Tree defines for Lochnagar clocking + * + * Copyright (c) 2017-2018 Cirrus Logic, Inc. and + * Cirrus Logic International Semiconductor Ltd. + * + * Author: Charles Keepax <ckeepax@opensource.cirrus.com> + */ + +#ifndef DT_BINDINGS_CLK_LOCHNAGAR_H +#define DT_BINDINGS_CLK_LOCHNAGAR_H + +#define LOCHNAGAR_CDC_MCLK1 0 +#define LOCHNAGAR_CDC_MCLK2 1 +#define LOCHNAGAR_DSP_CLKIN 2 +#define LOCHNAGAR_GF_CLKOUT1 3 +#define LOCHNAGAR_GF_CLKOUT2 4 +#define LOCHNAGAR_PSIA1_MCLK 5 +#define LOCHNAGAR_PSIA2_MCLK 6 +#define LOCHNAGAR_SPDIF_MCLK 7 +#define LOCHNAGAR_ADAT_MCLK 8 +#define LOCHNAGAR_SOUNDCARD_MCLK 9 +#define LOCHNAGAR_SPDIF_CLKOUT 10 + +#endif diff --git a/dts/include/dt-bindings/clock/actions,s500-cmu.h b/dts/include/dt-bindings/clock/actions,s500-cmu.h new file mode 100644 index 0000000000..030981cd2d --- /dev/null +++ b/dts/include/dt-bindings/clock/actions,s500-cmu.h @@ -0,0 +1,78 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Device Tree binding constants for Actions Semi S500 Clock Management Unit + * + * Copyright (c) 2014 Actions Semi Inc. + * Copyright (c) 2018 LSI-TEC - Caninos Loucos + */ + +#ifndef __DT_BINDINGS_CLOCK_S500_CMU_H +#define __DT_BINDINGS_CLOCK_S500_CMU_H + +#define CLK_NONE 0 + +/* fixed rate clocks */ +#define CLK_LOSC 1 +#define CLK_HOSC 2 + +/* pll clocks */ +#define CLK_CORE_PLL 3 +#define CLK_DEV_PLL 4 +#define CLK_DDR_PLL 5 +#define CLK_NAND_PLL 6 +#define CLK_DISPLAY_PLL 7 +#define CLK_ETHERNET_PLL 8 +#define CLK_AUDIO_PLL 9 + +/* system clock */ +#define CLK_DEV 10 +#define CLK_H 11 +#define CLK_AHBPREDIV 12 +#define CLK_AHB 13 +#define CLK_DE 14 +#define CLK_BISP 15 +#define CLK_VCE 16 +#define CLK_VDE 17 + +/* peripheral device clock */ +#define CLK_TIMER 18 +#define CLK_I2C0 19 +#define CLK_I2C1 20 +#define CLK_I2C2 21 +#define CLK_I2C3 22 +#define CLK_PWM0 23 +#define CLK_PWM1 24 +#define CLK_PWM2 25 +#define CLK_PWM3 26 +#define CLK_PWM4 27 +#define CLK_PWM5 28 +#define CLK_SD0 29 +#define CLK_SD1 30 +#define CLK_SD2 31 +#define CLK_SENSOR0 32 +#define CLK_SENSOR1 33 +#define CLK_SPI0 34 +#define CLK_SPI1 35 +#define CLK_SPI2 36 +#define CLK_SPI3 37 +#define CLK_UART0 38 +#define CLK_UART1 39 +#define CLK_UART2 40 +#define CLK_UART3 41 +#define CLK_UART4 42 +#define CLK_UART5 43 +#define CLK_UART6 44 +#define CLK_DE1 45 +#define CLK_DE2 46 +#define CLK_I2SRX 47 +#define CLK_I2STX 48 +#define CLK_HDMI_AUDIO 49 +#define CLK_HDMI 50 +#define CLK_SPDIF 51 +#define CLK_NAND 52 +#define CLK_ECC 53 +#define CLK_RMII_REF 54 + +#define CLK_NR_CLKS (CLK_RMII_REF + 1) + +#endif /* __DT_BINDINGS_CLOCK_S500_CMU_H */ diff --git a/dts/include/dt-bindings/clock/ath79-clk.h b/dts/include/dt-bindings/clock/ath79-clk.h index 27359ad839..dcc679a7ad 100644 --- a/dts/include/dt-bindings/clock/ath79-clk.h +++ b/dts/include/dt-bindings/clock/ath79-clk.h @@ -13,7 +13,9 @@ #define ATH79_CLK_CPU 0 #define ATH79_CLK_DDR 1 #define ATH79_CLK_AHB 2 +#define ATH79_CLK_REF 3 +#define ATH79_CLK_MDIO 4 -#define ATH79_CLK_END 3 +#define ATH79_CLK_END 5 #endif /* __DT_BINDINGS_ATH79_CLK_H */ diff --git a/dts/include/dt-bindings/clock/axg-aoclkc.h b/dts/include/dt-bindings/clock/axg-aoclkc.h index 61955016a5..8ec4a269c7 100644 --- a/dts/include/dt-bindings/clock/axg-aoclkc.h +++ b/dts/include/dt-bindings/clock/axg-aoclkc.h @@ -21,6 +21,11 @@ #define CLKID_AO_SAR_ADC_SEL 8 #define CLKID_AO_SAR_ADC_DIV 9 #define CLKID_AO_SAR_ADC_CLK 10 -#define CLKID_AO_ALT_XTAL 11 +#define CLKID_AO_CTS_OSCIN 11 +#define CLKID_AO_32K_PRE 12 +#define CLKID_AO_32K_DIV 13 +#define CLKID_AO_32K_SEL 14 +#define CLKID_AO_32K 15 +#define CLKID_AO_CTS_RTC_OSCIN 16 #endif diff --git a/dts/include/dt-bindings/clock/exynos5433.h b/dts/include/dt-bindings/clock/exynos5433.h index 98bd85ce1e..25ffa53573 100644 --- a/dts/include/dt-bindings/clock/exynos5433.h +++ b/dts/include/dt-bindings/clock/exynos5433.h @@ -156,7 +156,7 @@ #define CLK_ACLK_G2D_266 220 #define CLK_ACLK_G2D_400 221 #define CLK_ACLK_G3D_400 222 -#define CLK_ACLK_IMEM_SSX_266 223 +#define CLK_ACLK_IMEM_SSSX_266 223 #define CLK_ACLK_BUS0_400 224 #define CLK_ACLK_BUS1_400 225 #define CLK_ACLK_IMEM_200 226 @@ -1406,4 +1406,10 @@ #define CAM1_NR_CLK 113 +/* CMU_IMEM */ +#define CLK_ACLK_SLIMSSS 2 +#define CLK_PCLK_SLIMSSS 35 + +#define IMEM_NR_CLK 36 + #endif /* _DT_BINDINGS_CLOCK_EXYNOS5433_H */ diff --git a/dts/include/dt-bindings/clock/g12a-aoclkc.h b/dts/include/dt-bindings/clock/g12a-aoclkc.h new file mode 100644 index 0000000000..8db01ffbeb --- /dev/null +++ b/dts/include/dt-bindings/clock/g12a-aoclkc.h @@ -0,0 +1,34 @@ +/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */ +/* + * Copyright (c) 2016 BayLibre, SAS + * Author: Neil Armstrong <narmstrong@baylibre.com> + * + * Copyright (c) 2018 Amlogic, inc. + * Author: Qiufang Dai <qiufang.dai@amlogic.com> + */ + +#ifndef DT_BINDINGS_CLOCK_AMLOGIC_MESON_G12A_AOCLK +#define DT_BINDINGS_CLOCK_AMLOGIC_MESON_G12A_AOCLK + +#define CLKID_AO_AHB 0 +#define CLKID_AO_IR_IN 1 +#define CLKID_AO_I2C_M0 2 +#define CLKID_AO_I2C_S0 3 +#define CLKID_AO_UART 4 +#define CLKID_AO_PROD_I2C 5 +#define CLKID_AO_UART2 6 +#define CLKID_AO_IR_OUT 7 +#define CLKID_AO_SAR_ADC 8 +#define CLKID_AO_MAILBOX 9 +#define CLKID_AO_M3 10 +#define CLKID_AO_AHB_SRAM 11 +#define CLKID_AO_RTI 12 +#define CLKID_AO_M4_FCLK 13 +#define CLKID_AO_M4_HCLK 14 +#define CLKID_AO_CLK81 15 +#define CLKID_AO_SAR_ADC_CLK 18 +#define CLKID_AO_32K 23 +#define CLKID_AO_CEC 27 +#define CLKID_AO_CTS_RTC_OSCIN 28 + +#endif diff --git a/dts/include/dt-bindings/clock/g12a-clkc.h b/dts/include/dt-bindings/clock/g12a-clkc.h new file mode 100644 index 0000000000..83b657038d --- /dev/null +++ b/dts/include/dt-bindings/clock/g12a-clkc.h @@ -0,0 +1,135 @@ +/* SPDX-License-Identifier: GPL-2.0+ OR MIT */ +/* + * Meson-G12A clock tree IDs + * + * Copyright (c) 2018 Amlogic, Inc. All rights reserved. + */ + +#ifndef __G12A_CLKC_H +#define __G12A_CLKC_H + +#define CLKID_SYS_PLL 0 +#define CLKID_FIXED_PLL 1 +#define CLKID_FCLK_DIV2 2 +#define CLKID_FCLK_DIV3 3 +#define CLKID_FCLK_DIV4 4 +#define CLKID_FCLK_DIV5 5 +#define CLKID_FCLK_DIV7 6 +#define CLKID_GP0_PLL 7 +#define CLKID_CLK81 10 +#define CLKID_MPLL0 11 +#define CLKID_MPLL1 12 +#define CLKID_MPLL2 13 +#define CLKID_MPLL3 14 +#define CLKID_DDR 15 +#define CLKID_DOS 16 +#define CLKID_AUDIO_LOCKER 17 +#define CLKID_MIPI_DSI_HOST 18 +#define CLKID_ETH_PHY 19 +#define CLKID_ISA 20 +#define CLKID_PL301 21 +#define CLKID_PERIPHS 22 +#define CLKID_SPICC0 23 +#define CLKID_I2C 24 +#define CLKID_SANA 25 +#define CLKID_SD 26 +#define CLKID_RNG0 27 +#define CLKID_UART0 28 +#define CLKID_SPICC1 29 +#define CLKID_HIU_IFACE 30 +#define CLKID_MIPI_DSI_PHY 31 +#define CLKID_ASSIST_MISC 32 +#define CLKID_SD_EMMC_A 33 +#define CLKID_SD_EMMC_B 34 +#define CLKID_SD_EMMC_C 35 +#define CLKID_AUDIO_CODEC 36 +#define CLKID_AUDIO 37 +#define CLKID_ETH 38 +#define CLKID_DEMUX 39 +#define CLKID_AUDIO_IFIFO 40 +#define CLKID_ADC 41 +#define CLKID_UART1 42 +#define CLKID_G2D 43 +#define CLKID_RESET 44 +#define CLKID_PCIE_COMB 45 +#define CLKID_PARSER 46 +#define CLKID_USB 47 +#define CLKID_PCIE_PHY 48 +#define CLKID_AHB_ARB0 49 +#define CLKID_AHB_DATA_BUS 50 +#define CLKID_AHB_CTRL_BUS 51 +#define CLKID_HTX_HDCP22 52 +#define CLKID_HTX_PCLK 53 +#define CLKID_BT656 54 +#define CLKID_USB1_DDR_BRIDGE 55 +#define CLKID_MMC_PCLK 56 +#define CLKID_UART2 57 +#define CLKID_VPU_INTR 58 +#define CLKID_GIC 59 +#define CLKID_SD_EMMC_A_CLK0 60 +#define CLKID_SD_EMMC_B_CLK0 61 +#define CLKID_SD_EMMC_C_CLK0 62 +#define CLKID_HIFI_PLL 74 +#define CLKID_VCLK2_VENCI0 80 +#define CLKID_VCLK2_VENCI1 81 +#define CLKID_VCLK2_VENCP0 82 +#define CLKID_VCLK2_VENCP1 83 +#define CLKID_VCLK2_VENCT0 84 +#define CLKID_VCLK2_VENCT1 85 +#define CLKID_VCLK2_OTHER 86 +#define CLKID_VCLK2_ENCI 87 +#define CLKID_VCLK2_ENCP 88 +#define CLKID_DAC_CLK 89 +#define CLKID_AOCLK 90 +#define CLKID_IEC958 91 +#define CLKID_ENC480P 92 +#define CLKID_RNG1 93 +#define CLKID_VCLK2_ENCT 94 +#define CLKID_VCLK2_ENCL 95 +#define CLKID_VCLK2_VENCLMMC 96 +#define CLKID_VCLK2_VENCL 97 +#define CLKID_VCLK2_OTHER1 98 +#define CLKID_FCLK_DIV2P5 99 +#define CLKID_DMA 105 +#define CLKID_EFUSE 106 +#define CLKID_ROM_BOOT 107 +#define CLKID_RESET_SEC 108 +#define CLKID_SEC_AHB_APB3 109 +#define CLKID_VPU_0_SEL 110 +#define CLKID_VPU_0 112 +#define CLKID_VPU_1_SEL 113 +#define CLKID_VPU_1 115 +#define CLKID_VPU 116 +#define CLKID_VAPB_0_SEL 117 +#define CLKID_VAPB_0 119 +#define CLKID_VAPB_1_SEL 120 +#define CLKID_VAPB_1 122 +#define CLKID_VAPB_SEL 123 +#define CLKID_VAPB 124 +#define CLKID_HDMI_PLL 128 +#define CLKID_VID_PLL 129 +#define CLKID_VCLK 138 +#define CLKID_VCLK2 139 +#define CLKID_VCLK_DIV1 148 +#define CLKID_VCLK_DIV2 149 +#define CLKID_VCLK_DIV4 150 +#define CLKID_VCLK_DIV6 151 +#define CLKID_VCLK_DIV12 152 +#define CLKID_VCLK2_DIV1 153 +#define CLKID_VCLK2_DIV2 154 +#define CLKID_VCLK2_DIV4 155 +#define CLKID_VCLK2_DIV6 156 +#define CLKID_VCLK2_DIV12 157 +#define CLKID_CTS_ENCI 162 +#define CLKID_CTS_ENCP 163 +#define CLKID_CTS_VDAC 164 +#define CLKID_HDMI_TX 165 +#define CLKID_HDMI 168 +#define CLKID_MALI_0_SEL 169 +#define CLKID_MALI_0 171 +#define CLKID_MALI_1_SEL 172 +#define CLKID_MALI_1 174 +#define CLKID_MALI 175 +#define CLKID_MPLL_5OM 177 + +#endif /* __G12A_CLKC_H */ diff --git a/dts/include/dt-bindings/clock/gxbb-aoclkc.h b/dts/include/dt-bindings/clock/gxbb-aoclkc.h index 9d15e2221f..ec3b26319f 100644 --- a/dts/include/dt-bindings/clock/gxbb-aoclkc.h +++ b/dts/include/dt-bindings/clock/gxbb-aoclkc.h @@ -63,5 +63,12 @@ #define CLKID_AO_UART2 4 #define CLKID_AO_IR_BLASTER 5 #define CLKID_AO_CEC_32K 6 +#define CLKID_AO_CTS_OSCIN 7 +#define CLKID_AO_32K_PRE 8 +#define CLKID_AO_32K_DIV 9 +#define CLKID_AO_32K_SEL 10 +#define CLKID_AO_32K 11 +#define CLKID_AO_CTS_RTC_OSCIN 12 +#define CLKID_AO_CLK81 13 #endif diff --git a/dts/include/dt-bindings/clock/imx5-clock.h b/dts/include/dt-bindings/clock/imx5-clock.h index d382fc71aa..a81be5be67 100644 --- a/dts/include/dt-bindings/clock/imx5-clock.h +++ b/dts/include/dt-bindings/clock/imx5-clock.h @@ -214,6 +214,7 @@ #define IMX5_CLK_IEEE1588_SEL 202 #define IMX5_CLK_IEEE1588_PODF 203 #define IMX5_CLK_IEEE1588_GATE 204 -#define IMX5_CLK_END 205 +#define IMX5_CLK_SCC2_IPG_GATE 205 +#define IMX5_CLK_END 206 #endif /* __DT_BINDINGS_CLOCK_IMX5_H */ diff --git a/dts/include/dt-bindings/clock/imx8mm-clock.h b/dts/include/dt-bindings/clock/imx8mm-clock.h new file mode 100644 index 0000000000..1b4353e7b4 --- /dev/null +++ b/dts/include/dt-bindings/clock/imx8mm-clock.h @@ -0,0 +1,244 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright 2017-2018 NXP + */ + +#ifndef __DT_BINDINGS_CLOCK_IMX8MM_H +#define __DT_BINDINGS_CLOCK_IMX8MM_H + +#define IMX8MM_CLK_DUMMY 0 +#define IMX8MM_CLK_32K 1 +#define IMX8MM_CLK_24M 2 +#define IMX8MM_OSC_HDMI_CLK 3 +#define IMX8MM_CLK_EXT1 4 +#define IMX8MM_CLK_EXT2 5 +#define IMX8MM_CLK_EXT3 6 +#define IMX8MM_CLK_EXT4 7 +#define IMX8MM_AUDIO_PLL1_REF_SEL 8 +#define IMX8MM_AUDIO_PLL2_REF_SEL 9 +#define IMX8MM_VIDEO_PLL1_REF_SEL 10 +#define IMX8MM_DRAM_PLL_REF_SEL 11 +#define IMX8MM_GPU_PLL_REF_SEL 12 +#define IMX8MM_VPU_PLL_REF_SEL 13 +#define IMX8MM_ARM_PLL_REF_SEL 14 +#define IMX8MM_SYS_PLL1_REF_SEL 15 +#define IMX8MM_SYS_PLL2_REF_SEL 16 +#define IMX8MM_SYS_PLL3_REF_SEL 17 +#define IMX8MM_AUDIO_PLL1 18 +#define IMX8MM_AUDIO_PLL2 19 +#define IMX8MM_VIDEO_PLL1 20 +#define IMX8MM_DRAM_PLL 21 +#define IMX8MM_GPU_PLL 22 +#define IMX8MM_VPU_PLL 23 +#define IMX8MM_ARM_PLL 24 +#define IMX8MM_SYS_PLL1 25 +#define IMX8MM_SYS_PLL2 26 +#define IMX8MM_SYS_PLL3 27 +#define IMX8MM_AUDIO_PLL1_BYPASS 28 +#define IMX8MM_AUDIO_PLL2_BYPASS 29 +#define IMX8MM_VIDEO_PLL1_BYPASS 30 +#define IMX8MM_DRAM_PLL_BYPASS 31 +#define IMX8MM_GPU_PLL_BYPASS 32 +#define IMX8MM_VPU_PLL_BYPASS 33 +#define IMX8MM_ARM_PLL_BYPASS 34 +#define IMX8MM_SYS_PLL1_BYPASS 35 +#define IMX8MM_SYS_PLL2_BYPASS 36 +#define IMX8MM_SYS_PLL3_BYPASS 37 +#define IMX8MM_AUDIO_PLL1_OUT 38 +#define IMX8MM_AUDIO_PLL2_OUT 39 +#define IMX8MM_VIDEO_PLL1_OUT 40 +#define IMX8MM_DRAM_PLL_OUT 41 +#define IMX8MM_GPU_PLL_OUT 42 +#define IMX8MM_VPU_PLL_OUT 43 +#define IMX8MM_ARM_PLL_OUT 44 +#define IMX8MM_SYS_PLL1_OUT 45 +#define IMX8MM_SYS_PLL2_OUT 46 +#define IMX8MM_SYS_PLL3_OUT 47 +#define IMX8MM_SYS_PLL1_40M 48 +#define IMX8MM_SYS_PLL1_80M 49 +#define IMX8MM_SYS_PLL1_100M 50 +#define IMX8MM_SYS_PLL1_133M 51 +#define IMX8MM_SYS_PLL1_160M 52 +#define IMX8MM_SYS_PLL1_200M 53 +#define IMX8MM_SYS_PLL1_266M 54 +#define IMX8MM_SYS_PLL1_400M 55 +#define IMX8MM_SYS_PLL1_800M 56 +#define IMX8MM_SYS_PLL2_50M 57 +#define IMX8MM_SYS_PLL2_100M 58 +#define IMX8MM_SYS_PLL2_125M 59 +#define IMX8MM_SYS_PLL2_166M 60 +#define IMX8MM_SYS_PLL2_200M 61 +#define IMX8MM_SYS_PLL2_250M 62 +#define IMX8MM_SYS_PLL2_333M 63 +#define IMX8MM_SYS_PLL2_500M 64 +#define IMX8MM_SYS_PLL2_1000M 65 + +/* core */ +#define IMX8MM_CLK_A53_SRC 66 +#define IMX8MM_CLK_M4_SRC 67 +#define IMX8MM_CLK_VPU_SRC 68 +#define IMX8MM_CLK_GPU3D_SRC 69 +#define IMX8MM_CLK_GPU2D_SRC 70 +#define IMX8MM_CLK_A53_CG 71 +#define IMX8MM_CLK_M4_CG 72 +#define IMX8MM_CLK_VPU_CG 73 +#define IMX8MM_CLK_GPU3D_CG 74 +#define IMX8MM_CLK_GPU2D_CG 75 +#define IMX8MM_CLK_A53_DIV 76 +#define IMX8MM_CLK_M4_DIV 77 +#define IMX8MM_CLK_VPU_DIV 78 +#define IMX8MM_CLK_GPU3D_DIV 79 +#define IMX8MM_CLK_GPU2D_DIV 80 + +/* bus */ +#define IMX8MM_CLK_MAIN_AXI 81 +#define IMX8MM_CLK_ENET_AXI 82 +#define IMX8MM_CLK_NAND_USDHC_BUS 83 +#define IMX8MM_CLK_VPU_BUS 84 +#define IMX8MM_CLK_DISP_AXI 85 +#define IMX8MM_CLK_DISP_APB 86 +#define IMX8MM_CLK_DISP_RTRM 87 +#define IMX8MM_CLK_USB_BUS 88 +#define IMX8MM_CLK_GPU_AXI 89 +#define IMX8MM_CLK_GPU_AHB 90 +#define IMX8MM_CLK_NOC 91 +#define IMX8MM_CLK_NOC_APB 92 + +#define IMX8MM_CLK_AHB 93 +#define IMX8MM_CLK_AUDIO_AHB 94 +#define IMX8MM_CLK_IPG_ROOT 95 +#define IMX8MM_CLK_IPG_AUDIO_ROOT 96 + +#define IMX8MM_CLK_DRAM_ALT 97 +#define IMX8MM_CLK_DRAM_APB 98 +#define IMX8MM_CLK_VPU_G1 99 +#define IMX8MM_CLK_VPU_G2 100 +#define IMX8MM_CLK_DISP_DTRC 101 +#define IMX8MM_CLK_DISP_DC8000 102 +#define IMX8MM_CLK_PCIE1_CTRL 103 +#define IMX8MM_CLK_PCIE1_PHY 104 +#define IMX8MM_CLK_PCIE1_AUX 105 +#define IMX8MM_CLK_DC_PIXEL 106 +#define IMX8MM_CLK_LCDIF_PIXEL 107 +#define IMX8MM_CLK_SAI1 108 +#define IMX8MM_CLK_SAI2 109 +#define IMX8MM_CLK_SAI3 110 +#define IMX8MM_CLK_SAI4 111 +#define IMX8MM_CLK_SAI5 112 +#define IMX8MM_CLK_SAI6 113 +#define IMX8MM_CLK_SPDIF1 114 +#define IMX8MM_CLK_SPDIF2 115 +#define IMX8MM_CLK_ENET_REF 116 +#define IMX8MM_CLK_ENET_TIMER 117 +#define IMX8MM_CLK_ENET_PHY_REF 118 +#define IMX8MM_CLK_NAND 119 +#define IMX8MM_CLK_QSPI 120 +#define IMX8MM_CLK_USDHC1 121 +#define IMX8MM_CLK_USDHC2 122 +#define IMX8MM_CLK_I2C1 123 +#define IMX8MM_CLK_I2C2 124 +#define IMX8MM_CLK_I2C3 125 +#define IMX8MM_CLK_I2C4 126 +#define IMX8MM_CLK_UART1 127 +#define IMX8MM_CLK_UART2 128 +#define IMX8MM_CLK_UART3 129 +#define IMX8MM_CLK_UART4 130 +#define IMX8MM_CLK_USB_CORE_REF 131 +#define IMX8MM_CLK_USB_PHY_REF 132 +#define IMX8MM_CLK_ECSPI1 133 +#define IMX8MM_CLK_ECSPI2 134 +#define IMX8MM_CLK_PWM1 135 +#define IMX8MM_CLK_PWM2 136 +#define IMX8MM_CLK_PWM3 137 +#define IMX8MM_CLK_PWM4 138 +#define IMX8MM_CLK_GPT1 139 +#define IMX8MM_CLK_WDOG 140 +#define IMX8MM_CLK_WRCLK 141 +#define IMX8MM_CLK_DSI_CORE 142 +#define IMX8MM_CLK_DSI_PHY_REF 143 +#define IMX8MM_CLK_DSI_DBI 144 +#define IMX8MM_CLK_USDHC3 145 +#define IMX8MM_CLK_CSI1_CORE 146 +#define IMX8MM_CLK_CSI1_PHY_REF 147 +#define IMX8MM_CLK_CSI1_ESC 148 +#define IMX8MM_CLK_CSI2_CORE 149 +#define IMX8MM_CLK_CSI2_PHY_REF 150 +#define IMX8MM_CLK_CSI2_ESC 151 +#define IMX8MM_CLK_PCIE2_CTRL 152 +#define IMX8MM_CLK_PCIE2_PHY 153 +#define IMX8MM_CLK_PCIE2_AUX 154 +#define IMX8MM_CLK_ECSPI3 155 +#define IMX8MM_CLK_PDM 156 +#define IMX8MM_CLK_VPU_H1 157 +#define IMX8MM_CLK_CLKO1 158 + +#define IMX8MM_CLK_ECSPI1_ROOT 159 +#define IMX8MM_CLK_ECSPI2_ROOT 160 +#define IMX8MM_CLK_ECSPI3_ROOT 161 +#define IMX8MM_CLK_ENET1_ROOT 162 +#define IMX8MM_CLK_GPT1_ROOT 163 +#define IMX8MM_CLK_I2C1_ROOT 164 +#define IMX8MM_CLK_I2C2_ROOT 165 +#define IMX8MM_CLK_I2C3_ROOT 166 +#define IMX8MM_CLK_I2C4_ROOT 167 +#define IMX8MM_CLK_OCOTP_ROOT 168 +#define IMX8MM_CLK_PCIE1_ROOT 169 +#define IMX8MM_CLK_PWM1_ROOT 170 +#define IMX8MM_CLK_PWM2_ROOT 171 +#define IMX8MM_CLK_PWM3_ROOT 172 +#define IMX8MM_CLK_PWM4_ROOT 173 +#define IMX8MM_CLK_QSPI_ROOT 174 +#define IMX8MM_CLK_NAND_ROOT 175 +#define IMX8MM_CLK_SAI1_ROOT 176 +#define IMX8MM_CLK_SAI1_IPG 177 +#define IMX8MM_CLK_SAI2_ROOT 178 +#define IMX8MM_CLK_SAI2_IPG 179 +#define IMX8MM_CLK_SAI3_ROOT 180 +#define IMX8MM_CLK_SAI3_IPG 181 +#define IMX8MM_CLK_SAI4_ROOT 182 +#define IMX8MM_CLK_SAI4_IPG 183 +#define IMX8MM_CLK_SAI5_ROOT 184 +#define IMX8MM_CLK_SAI5_IPG 185 +#define IMX8MM_CLK_SAI6_ROOT 186 +#define IMX8MM_CLK_SAI6_IPG 187 +#define IMX8MM_CLK_UART1_ROOT 188 +#define IMX8MM_CLK_UART2_ROOT 189 +#define IMX8MM_CLK_UART3_ROOT 190 +#define IMX8MM_CLK_UART4_ROOT 191 +#define IMX8MM_CLK_USB1_CTRL_ROOT 192 +#define IMX8MM_CLK_GPU3D_ROOT 193 +#define IMX8MM_CLK_USDHC1_ROOT 194 +#define IMX8MM_CLK_USDHC2_ROOT 195 +#define IMX8MM_CLK_WDOG1_ROOT 196 +#define IMX8MM_CLK_WDOG2_ROOT 197 +#define IMX8MM_CLK_WDOG3_ROOT 198 +#define IMX8MM_CLK_VPU_G1_ROOT 199 +#define IMX8MM_CLK_GPU_BUS_ROOT 200 +#define IMX8MM_CLK_VPU_H1_ROOT 201 +#define IMX8MM_CLK_VPU_G2_ROOT 202 +#define IMX8MM_CLK_PDM_ROOT 203 +#define IMX8MM_CLK_DISP_ROOT 204 +#define IMX8MM_CLK_DISP_AXI_ROOT 205 +#define IMX8MM_CLK_DISP_APB_ROOT 206 +#define IMX8MM_CLK_DISP_RTRM_ROOT 207 +#define IMX8MM_CLK_USDHC3_ROOT 208 +#define IMX8MM_CLK_TMU_ROOT 209 +#define IMX8MM_CLK_VPU_DEC_ROOT 210 +#define IMX8MM_CLK_SDMA1_ROOT 211 +#define IMX8MM_CLK_SDMA2_ROOT 212 +#define IMX8MM_CLK_SDMA3_ROOT 213 +#define IMX8MM_CLK_GPT_3M 214 +#define IMX8MM_CLK_ARM 215 +#define IMX8MM_CLK_PDM_IPG 216 +#define IMX8MM_CLK_GPU2D_ROOT 217 +#define IMX8MM_CLK_MU_ROOT 218 +#define IMX8MM_CLK_CSI1_ROOT 219 + +#define IMX8MM_CLK_DRAM_CORE 220 +#define IMX8MM_CLK_DRAM_ALT_ROOT 221 + +#define IMX8MM_CLK_NAND_USDHC_BUS_RAWNAND_CLK 222 + +#define IMX8MM_CLK_END 223 + +#endif diff --git a/dts/include/dt-bindings/clock/imx8mq-clock.h b/dts/include/dt-bindings/clock/imx8mq-clock.h index 04f7ac3459..6677e920dc 100644 --- a/dts/include/dt-bindings/clock/imx8mq-clock.h +++ b/dts/include/dt-bindings/clock/imx8mq-clock.h @@ -245,151 +245,160 @@ /* USB_CORE_REF */ #define IMX8MQ_CLK_USB_CORE_REF 152 /* USB_PHY_REF */ -#define IMX8MQ_CLK_USB_PHY_REF 163 +#define IMX8MQ_CLK_USB_PHY_REF 153 /* ECSPI1 */ -#define IMX8MQ_CLK_ECSPI1 164 +#define IMX8MQ_CLK_ECSPI1 154 /* ECSPI2 */ -#define IMX8MQ_CLK_ECSPI2 165 +#define IMX8MQ_CLK_ECSPI2 155 /* PWM1 */ -#define IMX8MQ_CLK_PWM1 166 +#define IMX8MQ_CLK_PWM1 156 /* PWM2 */ -#define IMX8MQ_CLK_PWM2 167 +#define IMX8MQ_CLK_PWM2 157 /* PWM3 */ -#define IMX8MQ_CLK_PWM3 168 +#define IMX8MQ_CLK_PWM3 158 /* PWM4 */ -#define IMX8MQ_CLK_PWM4 169 +#define IMX8MQ_CLK_PWM4 159 /* GPT1 */ -#define IMX8MQ_CLK_GPT1 170 +#define IMX8MQ_CLK_GPT1 160 /* WDOG */ -#define IMX8MQ_CLK_WDOG 171 +#define IMX8MQ_CLK_WDOG 161 /* WRCLK */ -#define IMX8MQ_CLK_WRCLK 172 +#define IMX8MQ_CLK_WRCLK 162 /* DSI_CORE */ -#define IMX8MQ_CLK_DSI_CORE 173 +#define IMX8MQ_CLK_DSI_CORE 163 /* DSI_PHY */ -#define IMX8MQ_CLK_DSI_PHY_REF 174 +#define IMX8MQ_CLK_DSI_PHY_REF 164 /* DSI_DBI */ -#define IMX8MQ_CLK_DSI_DBI 175 +#define IMX8MQ_CLK_DSI_DBI 165 /*DSI_ESC */ -#define IMX8MQ_CLK_DSI_ESC 176 +#define IMX8MQ_CLK_DSI_ESC 166 /* CSI1_CORE */ -#define IMX8MQ_CLK_CSI1_CORE 177 +#define IMX8MQ_CLK_CSI1_CORE 167 /* CSI1_PHY */ -#define IMX8MQ_CLK_CSI1_PHY_REF 178 +#define IMX8MQ_CLK_CSI1_PHY_REF 168 /* CSI_ESC */ -#define IMX8MQ_CLK_CSI1_ESC 179 +#define IMX8MQ_CLK_CSI1_ESC 169 /* CSI2_CORE */ #define IMX8MQ_CLK_CSI2_CORE 170 /* CSI2_PHY */ -#define IMX8MQ_CLK_CSI2_PHY_REF 181 +#define IMX8MQ_CLK_CSI2_PHY_REF 171 /* CSI2_ESC */ -#define IMX8MQ_CLK_CSI2_ESC 182 +#define IMX8MQ_CLK_CSI2_ESC 172 /* PCIE2_CTRL */ -#define IMX8MQ_CLK_PCIE2_CTRL 183 +#define IMX8MQ_CLK_PCIE2_CTRL 173 /* PCIE2_PHY */ -#define IMX8MQ_CLK_PCIE2_PHY 184 +#define IMX8MQ_CLK_PCIE2_PHY 174 /* PCIE2_AUX */ -#define IMX8MQ_CLK_PCIE2_AUX 185 +#define IMX8MQ_CLK_PCIE2_AUX 175 /* ECSPI3 */ -#define IMX8MQ_CLK_ECSPI3 186 +#define IMX8MQ_CLK_ECSPI3 176 /* CCGR clocks */ -#define IMX8MQ_CLK_A53_ROOT 187 -#define IMX8MQ_CLK_DRAM_ROOT 188 -#define IMX8MQ_CLK_ECSPI1_ROOT 189 +#define IMX8MQ_CLK_A53_ROOT 177 +#define IMX8MQ_CLK_DRAM_ROOT 178 +#define IMX8MQ_CLK_ECSPI1_ROOT 179 #define IMX8MQ_CLK_ECSPI2_ROOT 180 #define IMX8MQ_CLK_ECSPI3_ROOT 181 #define IMX8MQ_CLK_ENET1_ROOT 182 -#define IMX8MQ_CLK_GPT1_ROOT 193 -#define IMX8MQ_CLK_I2C1_ROOT 194 -#define IMX8MQ_CLK_I2C2_ROOT 195 -#define IMX8MQ_CLK_I2C3_ROOT 196 -#define IMX8MQ_CLK_I2C4_ROOT 197 -#define IMX8MQ_CLK_M4_ROOT 198 -#define IMX8MQ_CLK_PCIE1_ROOT 199 -#define IMX8MQ_CLK_PCIE2_ROOT 200 -#define IMX8MQ_CLK_PWM1_ROOT 201 -#define IMX8MQ_CLK_PWM2_ROOT 202 -#define IMX8MQ_CLK_PWM3_ROOT 203 -#define IMX8MQ_CLK_PWM4_ROOT 204 -#define IMX8MQ_CLK_QSPI_ROOT 205 -#define IMX8MQ_CLK_SAI1_ROOT 206 -#define IMX8MQ_CLK_SAI2_ROOT 207 -#define IMX8MQ_CLK_SAI3_ROOT 208 -#define IMX8MQ_CLK_SAI4_ROOT 209 -#define IMX8MQ_CLK_SAI5_ROOT 210 -#define IMX8MQ_CLK_SAI6_ROOT 212 -#define IMX8MQ_CLK_UART1_ROOT 213 -#define IMX8MQ_CLK_UART2_ROOT 214 -#define IMX8MQ_CLK_UART3_ROOT 215 -#define IMX8MQ_CLK_UART4_ROOT 216 -#define IMX8MQ_CLK_USB1_CTRL_ROOT 217 -#define IMX8MQ_CLK_USB2_CTRL_ROOT 218 -#define IMX8MQ_CLK_USB1_PHY_ROOT 219 -#define IMX8MQ_CLK_USB2_PHY_ROOT 220 -#define IMX8MQ_CLK_USDHC1_ROOT 221 -#define IMX8MQ_CLK_USDHC2_ROOT 222 -#define IMX8MQ_CLK_WDOG1_ROOT 223 -#define IMX8MQ_CLK_WDOG2_ROOT 224 -#define IMX8MQ_CLK_WDOG3_ROOT 225 -#define IMX8MQ_CLK_GPU_ROOT 226 -#define IMX8MQ_CLK_HEVC_ROOT 227 -#define IMX8MQ_CLK_AVC_ROOT 228 -#define IMX8MQ_CLK_VP9_ROOT 229 -#define IMX8MQ_CLK_HEVC_INTER_ROOT 230 -#define IMX8MQ_CLK_DISP_ROOT 231 -#define IMX8MQ_CLK_HDMI_ROOT 232 -#define IMX8MQ_CLK_HDMI_PHY_ROOT 233 -#define IMX8MQ_CLK_VPU_DEC_ROOT 234 -#define IMX8MQ_CLK_CSI1_ROOT 235 -#define IMX8MQ_CLK_CSI2_ROOT 236 -#define IMX8MQ_CLK_RAWNAND_ROOT 237 -#define IMX8MQ_CLK_SDMA1_ROOT 238 -#define IMX8MQ_CLK_SDMA2_ROOT 239 -#define IMX8MQ_CLK_VPU_G1_ROOT 240 -#define IMX8MQ_CLK_VPU_G2_ROOT 241 +#define IMX8MQ_CLK_GPT1_ROOT 183 +#define IMX8MQ_CLK_I2C1_ROOT 184 +#define IMX8MQ_CLK_I2C2_ROOT 185 +#define IMX8MQ_CLK_I2C3_ROOT 186 +#define IMX8MQ_CLK_I2C4_ROOT 187 +#define IMX8MQ_CLK_M4_ROOT 188 +#define IMX8MQ_CLK_PCIE1_ROOT 189 +#define IMX8MQ_CLK_PCIE2_ROOT 190 +#define IMX8MQ_CLK_PWM1_ROOT 191 +#define IMX8MQ_CLK_PWM2_ROOT 192 +#define IMX8MQ_CLK_PWM3_ROOT 193 +#define IMX8MQ_CLK_PWM4_ROOT 194 +#define IMX8MQ_CLK_QSPI_ROOT 195 +#define IMX8MQ_CLK_SAI1_ROOT 196 +#define IMX8MQ_CLK_SAI2_ROOT 197 +#define IMX8MQ_CLK_SAI3_ROOT 198 +#define IMX8MQ_CLK_SAI4_ROOT 199 +#define IMX8MQ_CLK_SAI5_ROOT 200 +#define IMX8MQ_CLK_SAI6_ROOT 201 +#define IMX8MQ_CLK_UART1_ROOT 202 +#define IMX8MQ_CLK_UART2_ROOT 203 +#define IMX8MQ_CLK_UART3_ROOT 204 +#define IMX8MQ_CLK_UART4_ROOT 205 +#define IMX8MQ_CLK_USB1_CTRL_ROOT 206 +#define IMX8MQ_CLK_USB2_CTRL_ROOT 207 +#define IMX8MQ_CLK_USB1_PHY_ROOT 208 +#define IMX8MQ_CLK_USB2_PHY_ROOT 209 +#define IMX8MQ_CLK_USDHC1_ROOT 210 +#define IMX8MQ_CLK_USDHC2_ROOT 211 +#define IMX8MQ_CLK_WDOG1_ROOT 212 +#define IMX8MQ_CLK_WDOG2_ROOT 213 +#define IMX8MQ_CLK_WDOG3_ROOT 214 +#define IMX8MQ_CLK_GPU_ROOT 215 +#define IMX8MQ_CLK_HEVC_ROOT 216 +#define IMX8MQ_CLK_AVC_ROOT 217 +#define IMX8MQ_CLK_VP9_ROOT 218 +#define IMX8MQ_CLK_HEVC_INTER_ROOT 219 +#define IMX8MQ_CLK_DISP_ROOT 220 +#define IMX8MQ_CLK_HDMI_ROOT 221 +#define IMX8MQ_CLK_HDMI_PHY_ROOT 222 +#define IMX8MQ_CLK_VPU_DEC_ROOT 223 +#define IMX8MQ_CLK_CSI1_ROOT 224 +#define IMX8MQ_CLK_CSI2_ROOT 225 +#define IMX8MQ_CLK_RAWNAND_ROOT 226 +#define IMX8MQ_CLK_SDMA1_ROOT 227 +#define IMX8MQ_CLK_SDMA2_ROOT 228 +#define IMX8MQ_CLK_VPU_G1_ROOT 229 +#define IMX8MQ_CLK_VPU_G2_ROOT 230 /* SCCG PLL GATE */ -#define IMX8MQ_SYS1_PLL_OUT 242 -#define IMX8MQ_SYS2_PLL_OUT 243 -#define IMX8MQ_SYS3_PLL_OUT 244 -#define IMX8MQ_DRAM_PLL_OUT 245 - -#define IMX8MQ_GPT_3M_CLK 246 - -#define IMX8MQ_CLK_IPG_ROOT 247 -#define IMX8MQ_CLK_IPG_AUDIO_ROOT 248 -#define IMX8MQ_CLK_SAI1_IPG 249 -#define IMX8MQ_CLK_SAI2_IPG 250 -#define IMX8MQ_CLK_SAI3_IPG 251 -#define IMX8MQ_CLK_SAI4_IPG 252 -#define IMX8MQ_CLK_SAI5_IPG 253 -#define IMX8MQ_CLK_SAI6_IPG 254 +#define IMX8MQ_SYS1_PLL_OUT 231 +#define IMX8MQ_SYS2_PLL_OUT 232 +#define IMX8MQ_SYS3_PLL_OUT 233 +#define IMX8MQ_DRAM_PLL_OUT 234 + +#define IMX8MQ_GPT_3M_CLK 235 + +#define IMX8MQ_CLK_IPG_ROOT 236 +#define IMX8MQ_CLK_IPG_AUDIO_ROOT 237 +#define IMX8MQ_CLK_SAI1_IPG 238 +#define IMX8MQ_CLK_SAI2_IPG 239 +#define IMX8MQ_CLK_SAI3_IPG 240 +#define IMX8MQ_CLK_SAI4_IPG 241 +#define IMX8MQ_CLK_SAI5_IPG 242 +#define IMX8MQ_CLK_SAI6_IPG 243 /* DSI AHB/IPG clocks */ /* rxesc clock */ -#define IMX8MQ_CLK_DSI_AHB 255 +#define IMX8MQ_CLK_DSI_AHB 244 /* txesc clock */ -#define IMX8MQ_CLK_DSI_IPG_DIV 256 +#define IMX8MQ_CLK_DSI_IPG_DIV 245 -#define IMX8MQ_CLK_TMU_ROOT 257 +#define IMX8MQ_CLK_TMU_ROOT 246 /* Display root clocks */ -#define IMX8MQ_CLK_DISP_AXI_ROOT 258 -#define IMX8MQ_CLK_DISP_APB_ROOT 259 -#define IMX8MQ_CLK_DISP_RTRM_ROOT 260 +#define IMX8MQ_CLK_DISP_AXI_ROOT 247 +#define IMX8MQ_CLK_DISP_APB_ROOT 248 +#define IMX8MQ_CLK_DISP_RTRM_ROOT 249 -#define IMX8MQ_CLK_OCOTP_ROOT 261 +#define IMX8MQ_CLK_OCOTP_ROOT 250 -#define IMX8MQ_CLK_DRAM_ALT_ROOT 262 -#define IMX8MQ_CLK_DRAM_CORE 263 +#define IMX8MQ_CLK_DRAM_ALT_ROOT 251 +#define IMX8MQ_CLK_DRAM_CORE 252 -#define IMX8MQ_CLK_MU_ROOT 264 -#define IMX8MQ_VIDEO2_PLL_OUT 265 +#define IMX8MQ_CLK_MU_ROOT 253 +#define IMX8MQ_VIDEO2_PLL_OUT 254 -#define IMX8MQ_CLK_CLKO2 266 +#define IMX8MQ_CLK_CLKO2 255 -#define IMX8MQ_CLK_NAND_USDHC_BUS_RAWNAND_CLK 267 +#define IMX8MQ_CLK_NAND_USDHC_BUS_RAWNAND_CLK 256 -#define IMX8MQ_CLK_END 268 +#define IMX8MQ_CLK_CLKO1 257 +#define IMX8MQ_CLK_ARM 258 + +#define IMX8MQ_CLK_GPIO1_ROOT 259 +#define IMX8MQ_CLK_GPIO2_ROOT 260 +#define IMX8MQ_CLK_GPIO3_ROOT 261 +#define IMX8MQ_CLK_GPIO4_ROOT 262 +#define IMX8MQ_CLK_GPIO5_ROOT 263 + +#define IMX8MQ_CLK_END 264 #endif /* __DT_BINDINGS_CLOCK_IMX8MQ_H */ diff --git a/dts/include/dt-bindings/clock/marvell,mmp2.h b/dts/include/dt-bindings/clock/marvell,mmp2.h index 228a5e234a..e785c6eb35 100644 --- a/dts/include/dt-bindings/clock/marvell,mmp2.h +++ b/dts/include/dt-bindings/clock/marvell,mmp2.h @@ -71,6 +71,7 @@ #define MMP2_CLK_CCIC1_MIX 117 #define MMP2_CLK_CCIC1_PHY 118 #define MMP2_CLK_CCIC1_SPHY 119 +#define MMP2_CLK_DISP0_LCDC 120 #define MMP2_NR_CLKS 200 #endif diff --git a/dts/include/dt-bindings/clock/meson8b-clkc.h b/dts/include/dt-bindings/clock/meson8b-clkc.h index 5fe2923382..8067077a62 100644 --- a/dts/include/dt-bindings/clock/meson8b-clkc.h +++ b/dts/include/dt-bindings/clock/meson8b-clkc.h @@ -104,6 +104,7 @@ #define CLKID_MPLL2 95 #define CLKID_NAND_CLK 112 #define CLKID_ABP 124 +#define CLKID_APB 124 #define CLKID_PERIPH 126 #define CLKID_AXI 128 #define CLKID_L2_DRAM 130 diff --git a/dts/include/dt-bindings/clock/mt2712-clk.h b/dts/include/dt-bindings/clock/mt2712-clk.h index 76265836a1..c3b29dff9c 100644 --- a/dts/include/dt-bindings/clock/mt2712-clk.h +++ b/dts/include/dt-bindings/clock/mt2712-clk.h @@ -228,7 +228,8 @@ #define CLK_TOP_NFI2X_EN 189 #define CLK_TOP_NFIECC_EN 190 #define CLK_TOP_NFI1X_CK_EN 191 -#define CLK_TOP_NR_CLK 192 +#define CLK_TOP_APLL2_D3 192 +#define CLK_TOP_NR_CLK 193 /* INFRACFG */ diff --git a/dts/include/dt-bindings/clock/mt8173-clk.h b/dts/include/dt-bindings/clock/mt8173-clk.h index 8aea623dd5..76e4e5b653 100644 --- a/dts/include/dt-bindings/clock/mt8173-clk.h +++ b/dts/include/dt-bindings/clock/mt8173-clk.h @@ -194,7 +194,8 @@ #define CLK_INFRA_PMICWRAP 11 #define CLK_INFRA_CLK_13M 12 #define CLK_INFRA_CA53SEL 13 -#define CLK_INFRA_CA57SEL 14 +#define CLK_INFRA_CA57SEL 14 /* Deprecated. Don't use it. */ +#define CLK_INFRA_CA72SEL 14 #define CLK_INFRA_NR_CLK 15 /* PERI_SYS */ diff --git a/dts/include/dt-bindings/clock/qcom,rpmcc.h b/dts/include/dt-bindings/clock/qcom,rpmcc.h index 3658b0c149..ede93a0ca1 100644 --- a/dts/include/dt-bindings/clock/qcom,rpmcc.h +++ b/dts/include/dt-bindings/clock/qcom,rpmcc.h @@ -127,5 +127,15 @@ #define RPM_SMD_BIMC_GPU_A_CLK 77 #define RPM_SMD_QPIC_CLK 78 #define RPM_SMD_QPIC_CLK_A 79 +#define RPM_SMD_LN_BB_CLK1 80 +#define RPM_SMD_LN_BB_CLK1_A 81 +#define RPM_SMD_LN_BB_CLK2 82 +#define RPM_SMD_LN_BB_CLK2_A 83 +#define RPM_SMD_LN_BB_CLK3_PIN 84 +#define RPM_SMD_LN_BB_CLK3_A_PIN 85 +#define RPM_SMD_RF_CLK3 86 +#define RPM_SMD_RF_CLK3_A 87 +#define RPM_SMD_RF_CLK3_PIN 88 +#define RPM_SMD_RF_CLK3_A_PIN 89 #endif diff --git a/dts/include/dt-bindings/clock/qcom,rpmh.h b/dts/include/dt-bindings/clock/qcom,rpmh.h index f48fbd6f20..edcab3f7b7 100644 --- a/dts/include/dt-bindings/clock/qcom,rpmh.h +++ b/dts/include/dt-bindings/clock/qcom,rpmh.h @@ -18,5 +18,6 @@ #define RPMH_RF_CLK2_A 9 #define RPMH_RF_CLK3 10 #define RPMH_RF_CLK3_A 11 +#define RPMH_IPA_CLK 12 #endif diff --git a/dts/include/dt-bindings/clock/r8a774a1-cpg-mssr.h b/dts/include/dt-bindings/clock/r8a774a1-cpg-mssr.h index 9bc5d45ff4..e355363f40 100644 --- a/dts/include/dt-bindings/clock/r8a774a1-cpg-mssr.h +++ b/dts/include/dt-bindings/clock/r8a774a1-cpg-mssr.h @@ -54,5 +54,6 @@ #define R8A774A1_CLK_CPEX 43 #define R8A774A1_CLK_R 44 #define R8A774A1_CLK_OSC 45 +#define R8A774A1_CLK_CANFD 46 #endif /* __DT_BINDINGS_CLOCK_R8A774A1_CPG_MSSR_H__ */ diff --git a/dts/include/dt-bindings/clock/r8a774c0-cpg-mssr.h b/dts/include/dt-bindings/clock/r8a774c0-cpg-mssr.h index 8fe51b6aca..8ad9cd6be8 100644 --- a/dts/include/dt-bindings/clock/r8a774c0-cpg-mssr.h +++ b/dts/include/dt-bindings/clock/r8a774c0-cpg-mssr.h @@ -56,5 +56,6 @@ #define R8A774C0_CLK_CSI0 45 #define R8A774C0_CLK_CP 46 #define R8A774C0_CLK_CPEX 47 +#define R8A774C0_CLK_CANFD 48 #endif /* __DT_BINDINGS_CLOCK_R8A774C0_CPG_MSSR_H__ */ diff --git a/dts/include/dt-bindings/clock/r8a7778-clock.h b/dts/include/dt-bindings/clock/r8a7778-clock.h index f6b07c5399..d0bff9ec5c 100644 --- a/dts/include/dt-bindings/clock/r8a7778-clock.h +++ b/dts/include/dt-bindings/clock/r8a7778-clock.h @@ -30,6 +30,8 @@ #define R8A7778_CLK_SCIF3 23 #define R8A7778_CLK_SCIF4 22 #define R8A7778_CLK_SCIF5 21 +#define R8A7778_CLK_HSCIF0 19 +#define R8A7778_CLK_HSCIF1 18 #define R8A7778_CLK_TMU0 16 #define R8A7778_CLK_TMU1 15 #define R8A7778_CLK_TMU2 14 diff --git a/dts/include/dt-bindings/clock/stm32mp1-clks.h b/dts/include/dt-bindings/clock/stm32mp1-clks.h index 90ec780bfc..4cdaf13582 100644 --- a/dts/include/dt-bindings/clock/stm32mp1-clks.h +++ b/dts/include/dt-bindings/clock/stm32mp1-clks.h @@ -248,7 +248,4 @@ #define STM32MP1_LAST_CLK 232 -#define LTDC_K LTDC_PX -#define ETHMAC_K ETHCK_K - #endif /* _DT_BINDINGS_STM32MP1_CLKS_H_ */ diff --git a/dts/include/dt-bindings/gpio/gpio.h b/dts/include/dt-bindings/gpio/gpio.h index 2cc10ae4bb..c029467e82 100644 --- a/dts/include/dt-bindings/gpio/gpio.h +++ b/dts/include/dt-bindings/gpio/gpio.h @@ -33,4 +33,10 @@ #define GPIO_PERSISTENT 0 #define GPIO_TRANSITORY 8 +/* Bit 4 express pull up */ +#define GPIO_PULL_UP 16 + +/* Bit 5 express pull down */ +#define GPIO_PULL_DOWN 32 + #endif diff --git a/dts/include/dt-bindings/iio/adc/ingenic,adc.h b/dts/include/dt-bindings/iio/adc/ingenic,adc.h new file mode 100644 index 0000000000..82706b2706 --- /dev/null +++ b/dts/include/dt-bindings/iio/adc/ingenic,adc.h @@ -0,0 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +#ifndef _DT_BINDINGS_IIO_ADC_INGENIC_ADC_H +#define _DT_BINDINGS_IIO_ADC_INGENIC_ADC_H + +/* ADC channel idx. */ +#define INGENIC_ADC_AUX 0 +#define INGENIC_ADC_BATTERY 1 + +#endif diff --git a/dts/include/dt-bindings/interconnect/qcom,sdm845.h b/dts/include/dt-bindings/interconnect/qcom,sdm845.h new file mode 100644 index 0000000000..7b2393be73 --- /dev/null +++ b/dts/include/dt-bindings/interconnect/qcom,sdm845.h @@ -0,0 +1,143 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Qualcomm SDM845 interconnect IDs + * + * Copyright (c) 2018, Linaro Ltd. + * Author: Georgi Djakov <georgi.djakov@linaro.org> + */ + +#ifndef __DT_BINDINGS_INTERCONNECT_QCOM_SDM845_H +#define __DT_BINDINGS_INTERCONNECT_QCOM_SDM845_H + +#define MASTER_A1NOC_CFG 0 +#define MASTER_BLSP_1 1 +#define MASTER_TSIF 2 +#define MASTER_SDCC_2 3 +#define MASTER_SDCC_4 4 +#define MASTER_UFS_CARD 5 +#define MASTER_UFS_MEM 6 +#define MASTER_PCIE_0 7 +#define MASTER_A2NOC_CFG 8 +#define MASTER_QDSS_BAM 9 +#define MASTER_BLSP_2 10 +#define MASTER_CNOC_A2NOC 11 +#define MASTER_CRYPTO 12 +#define MASTER_IPA 13 +#define MASTER_PCIE_1 14 +#define MASTER_QDSS_ETR 15 +#define MASTER_USB3_0 16 +#define MASTER_USB3_1 17 +#define MASTER_CAMNOC_HF0_UNCOMP 18 +#define MASTER_CAMNOC_HF1_UNCOMP 19 +#define MASTER_CAMNOC_SF_UNCOMP 20 +#define MASTER_SPDM 21 +#define MASTER_TIC 22 +#define MASTER_SNOC_CNOC 23 +#define MASTER_QDSS_DAP 24 +#define MASTER_CNOC_DC_NOC 25 +#define MASTER_APPSS_PROC 26 +#define MASTER_GNOC_CFG 27 +#define MASTER_LLCC 28 +#define MASTER_TCU_0 29 +#define MASTER_MEM_NOC_CFG 30 +#define MASTER_GNOC_MEM_NOC 31 +#define MASTER_MNOC_HF_MEM_NOC 32 +#define MASTER_MNOC_SF_MEM_NOC 33 +#define MASTER_SNOC_GC_MEM_NOC 34 +#define MASTER_SNOC_SF_MEM_NOC 35 +#define MASTER_GFX3D 36 +#define MASTER_CNOC_MNOC_CFG 37 +#define MASTER_CAMNOC_HF0 38 +#define MASTER_CAMNOC_HF1 39 +#define MASTER_CAMNOC_SF 40 +#define MASTER_MDP0 41 +#define MASTER_MDP1 42 +#define MASTER_ROTATOR 43 +#define MASTER_VIDEO_P0 44 +#define MASTER_VIDEO_P1 45 +#define MASTER_VIDEO_PROC 46 +#define MASTER_SNOC_CFG 47 +#define MASTER_A1NOC_SNOC 48 +#define MASTER_A2NOC_SNOC 49 +#define MASTER_GNOC_SNOC 50 +#define MASTER_MEM_NOC_SNOC 51 +#define MASTER_ANOC_PCIE_SNOC 52 +#define MASTER_PIMEM 53 +#define MASTER_GIC 54 +#define SLAVE_A1NOC_SNOC 55 +#define SLAVE_SERVICE_A1NOC 56 +#define SLAVE_ANOC_PCIE_A1NOC_SNOC 57 +#define SLAVE_A2NOC_SNOC 58 +#define SLAVE_ANOC_PCIE_SNOC 59 +#define SLAVE_SERVICE_A2NOC 60 +#define SLAVE_CAMNOC_UNCOMP 61 +#define SLAVE_A1NOC_CFG 62 +#define SLAVE_A2NOC_CFG 63 +#define SLAVE_AOP 64 +#define SLAVE_AOSS 65 +#define SLAVE_CAMERA_CFG 66 +#define SLAVE_CLK_CTL 67 +#define SLAVE_CDSP_CFG 68 +#define SLAVE_RBCPR_CX_CFG 69 +#define SLAVE_CRYPTO_0_CFG 70 +#define SLAVE_DCC_CFG 71 +#define SLAVE_CNOC_DDRSS 72 +#define SLAVE_DISPLAY_CFG 73 +#define SLAVE_GLM 74 +#define SLAVE_GFX3D_CFG 75 +#define SLAVE_IMEM_CFG 76 +#define SLAVE_IPA_CFG 77 +#define SLAVE_CNOC_MNOC_CFG 78 +#define SLAVE_PCIE_0_CFG 79 +#define SLAVE_PCIE_1_CFG 80 +#define SLAVE_PDM 81 +#define SLAVE_SOUTH_PHY_CFG 82 +#define SLAVE_PIMEM_CFG 83 +#define SLAVE_PRNG 84 +#define SLAVE_QDSS_CFG 85 +#define SLAVE_BLSP_2 86 +#define SLAVE_BLSP_1 87 +#define SLAVE_SDCC_2 88 +#define SLAVE_SDCC_4 89 +#define SLAVE_SNOC_CFG 90 +#define SLAVE_SPDM_WRAPPER 91 +#define SLAVE_SPSS_CFG 92 +#define SLAVE_TCSR 93 +#define SLAVE_TLMM_NORTH 94 +#define SLAVE_TLMM_SOUTH 95 +#define SLAVE_TSIF 96 +#define SLAVE_UFS_CARD_CFG 97 +#define SLAVE_UFS_MEM_CFG 98 +#define SLAVE_USB3_0 99 +#define SLAVE_USB3_1 100 +#define SLAVE_VENUS_CFG 101 +#define SLAVE_VSENSE_CTRL_CFG 102 +#define SLAVE_CNOC_A2NOC 103 +#define SLAVE_SERVICE_CNOC 104 +#define SLAVE_LLCC_CFG 105 +#define SLAVE_MEM_NOC_CFG 106 +#define SLAVE_GNOC_SNOC 107 +#define SLAVE_GNOC_MEM_NOC 108 +#define SLAVE_SERVICE_GNOC 109 +#define SLAVE_EBI1 110 +#define SLAVE_MSS_PROC_MS_MPU_CFG 111 +#define SLAVE_MEM_NOC_GNOC 112 +#define SLAVE_LLCC 113 +#define SLAVE_MEM_NOC_SNOC 114 +#define SLAVE_SERVICE_MEM_NOC 115 +#define SLAVE_MNOC_SF_MEM_NOC 116 +#define SLAVE_MNOC_HF_MEM_NOC 117 +#define SLAVE_SERVICE_MNOC 118 +#define SLAVE_APPSS 119 +#define SLAVE_SNOC_CNOC 120 +#define SLAVE_SNOC_MEM_NOC_GC 121 +#define SLAVE_SNOC_MEM_NOC_SF 122 +#define SLAVE_IMEM 123 +#define SLAVE_PCIE_0 124 +#define SLAVE_PCIE_1 125 +#define SLAVE_PIMEM 126 +#define SLAVE_SERVICE_SNOC 127 +#define SLAVE_QDSS_STM 128 +#define SLAVE_TCU 129 + +#endif diff --git a/dts/include/dt-bindings/mfd/st,stpmic1.h b/dts/include/dt-bindings/mfd/st,stpmic1.h new file mode 100644 index 0000000000..321cd08797 --- /dev/null +++ b/dts/include/dt-bindings/mfd/st,stpmic1.h @@ -0,0 +1,50 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) STMicroelectronics 2018 - All Rights Reserved + * Author: Philippe Peurichard <philippe.peurichard@st.com>, + * Pascal Paillet <p.paillet@st.com> for STMicroelectronics. + */ + +#ifndef __DT_BINDINGS_STPMIC1_H__ +#define __DT_BINDINGS_STPMIC1_H__ + +/* IRQ definitions */ +#define IT_PONKEY_F 0 +#define IT_PONKEY_R 1 +#define IT_WAKEUP_F 2 +#define IT_WAKEUP_R 3 +#define IT_VBUS_OTG_F 4 +#define IT_VBUS_OTG_R 5 +#define IT_SWOUT_F 6 +#define IT_SWOUT_R 7 + +#define IT_CURLIM_BUCK1 8 +#define IT_CURLIM_BUCK2 9 +#define IT_CURLIM_BUCK3 10 +#define IT_CURLIM_BUCK4 11 +#define IT_OCP_OTG 12 +#define IT_OCP_SWOUT 13 +#define IT_OCP_BOOST 14 +#define IT_OVP_BOOST 15 + +#define IT_CURLIM_LDO1 16 +#define IT_CURLIM_LDO2 17 +#define IT_CURLIM_LDO3 18 +#define IT_CURLIM_LDO4 19 +#define IT_CURLIM_LDO5 20 +#define IT_CURLIM_LDO6 21 +#define IT_SHORT_SWOTG 22 +#define IT_SHORT_SWOUT 23 + +#define IT_TWARN_F 24 +#define IT_TWARN_R 25 +#define IT_VINLOW_F 26 +#define IT_VINLOW_R 27 +#define IT_SWIN_F 30 +#define IT_SWIN_R 31 + +/* BUCK MODES definitions */ +#define STPMIC1_BUCK_MODE_NORMAL 0 +#define STPMIC1_BUCK_MODE_LP 2 + +#endif /* __DT_BINDINGS_STPMIC1_H__ */ diff --git a/dts/include/dt-bindings/pinctrl/at91.h b/dts/include/dt-bindings/pinctrl/at91.h index eb81867eac..8dc10e00c6 100644 --- a/dts/include/dt-bindings/pinctrl/at91.h +++ b/dts/include/dt-bindings/pinctrl/at91.h @@ -17,6 +17,7 @@ #define AT91_PINCTRL_DIS_SCHMIT (1 << 4) #define AT91_PINCTRL_OUTPUT (1 << 7) #define AT91_PINCTRL_OUTPUT_VAL(x) ((x & 0x1) << 8) +#define AT91_PINCTRL_SLEWRATE (1 << 9) #define AT91_PINCTRL_DEBOUNCE (1 << 16) #define AT91_PINCTRL_DEBOUNCE_VAL(x) (x << 17) @@ -27,6 +28,9 @@ #define AT91_PINCTRL_DRIVE_STRENGTH_MED (0x2 << 5) #define AT91_PINCTRL_DRIVE_STRENGTH_HI (0x3 << 5) +#define AT91_PINCTRL_SLEWRATE_DIS (0x0 << 9) +#define AT91_PINCTRL_SLEWRATE_ENA (0x1 << 9) + #define AT91_PIOA 0 #define AT91_PIOB 1 #define AT91_PIOC 2 diff --git a/dts/include/dt-bindings/pinctrl/lochnagar.h b/dts/include/dt-bindings/pinctrl/lochnagar.h new file mode 100644 index 0000000000..644760bf57 --- /dev/null +++ b/dts/include/dt-bindings/pinctrl/lochnagar.h @@ -0,0 +1,132 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Device Tree defines for Lochnagar pinctrl + * + * Copyright (c) 2018 Cirrus Logic, Inc. and + * Cirrus Logic International Semiconductor Ltd. + * + * Author: Charles Keepax <ckeepax@opensource.cirrus.com> + */ + +#ifndef DT_BINDINGS_PINCTRL_LOCHNAGAR_H +#define DT_BINDINGS_PINCTRL_LOCHNAGAR_H + +#define LOCHNAGAR1_PIN_CDC_RESET 0 +#define LOCHNAGAR1_PIN_DSP_RESET 1 +#define LOCHNAGAR1_PIN_CDC_CIF1MODE 2 +#define LOCHNAGAR1_PIN_NUM_GPIOS 3 + +#define LOCHNAGAR2_PIN_CDC_RESET 0 +#define LOCHNAGAR2_PIN_DSP_RESET 1 +#define LOCHNAGAR2_PIN_CDC_CIF1MODE 2 +#define LOCHNAGAR2_PIN_CDC_LDOENA 3 +#define LOCHNAGAR2_PIN_SPDIF_HWMODE 4 +#define LOCHNAGAR2_PIN_SPDIF_RESET 5 +#define LOCHNAGAR2_PIN_FPGA_GPIO1 6 +#define LOCHNAGAR2_PIN_FPGA_GPIO2 7 +#define LOCHNAGAR2_PIN_FPGA_GPIO3 8 +#define LOCHNAGAR2_PIN_FPGA_GPIO4 9 +#define LOCHNAGAR2_PIN_FPGA_GPIO5 10 +#define LOCHNAGAR2_PIN_FPGA_GPIO6 11 +#define LOCHNAGAR2_PIN_CDC_GPIO1 12 +#define LOCHNAGAR2_PIN_CDC_GPIO2 13 +#define LOCHNAGAR2_PIN_CDC_GPIO3 14 +#define LOCHNAGAR2_PIN_CDC_GPIO4 15 +#define LOCHNAGAR2_PIN_CDC_GPIO5 16 +#define LOCHNAGAR2_PIN_CDC_GPIO6 17 +#define LOCHNAGAR2_PIN_CDC_GPIO7 18 +#define LOCHNAGAR2_PIN_CDC_GPIO8 19 +#define LOCHNAGAR2_PIN_DSP_GPIO1 20 +#define LOCHNAGAR2_PIN_DSP_GPIO2 21 +#define LOCHNAGAR2_PIN_DSP_GPIO3 22 +#define LOCHNAGAR2_PIN_DSP_GPIO4 23 +#define LOCHNAGAR2_PIN_DSP_GPIO5 24 +#define LOCHNAGAR2_PIN_DSP_GPIO6 25 +#define LOCHNAGAR2_PIN_GF_GPIO2 26 +#define LOCHNAGAR2_PIN_GF_GPIO3 27 +#define LOCHNAGAR2_PIN_GF_GPIO7 28 +#define LOCHNAGAR2_PIN_CDC_AIF1_BCLK 29 +#define LOCHNAGAR2_PIN_CDC_AIF1_RXDAT 30 +#define LOCHNAGAR2_PIN_CDC_AIF1_LRCLK 31 +#define LOCHNAGAR2_PIN_CDC_AIF1_TXDAT 32 +#define LOCHNAGAR2_PIN_CDC_AIF2_BCLK 33 +#define LOCHNAGAR2_PIN_CDC_AIF2_RXDAT 34 +#define LOCHNAGAR2_PIN_CDC_AIF2_LRCLK 35 +#define LOCHNAGAR2_PIN_CDC_AIF2_TXDAT 36 +#define LOCHNAGAR2_PIN_CDC_AIF3_BCLK 37 +#define LOCHNAGAR2_PIN_CDC_AIF3_RXDAT 38 +#define LOCHNAGAR2_PIN_CDC_AIF3_LRCLK 39 +#define LOCHNAGAR2_PIN_CDC_AIF3_TXDAT 40 +#define LOCHNAGAR2_PIN_DSP_AIF1_BCLK 41 +#define LOCHNAGAR2_PIN_DSP_AIF1_RXDAT 42 +#define LOCHNAGAR2_PIN_DSP_AIF1_LRCLK 43 +#define LOCHNAGAR2_PIN_DSP_AIF1_TXDAT 44 +#define LOCHNAGAR2_PIN_DSP_AIF2_BCLK 45 +#define LOCHNAGAR2_PIN_DSP_AIF2_RXDAT 46 +#define LOCHNAGAR2_PIN_DSP_AIF2_LRCLK 47 +#define LOCHNAGAR2_PIN_DSP_AIF2_TXDAT 48 +#define LOCHNAGAR2_PIN_PSIA1_BCLK 49 +#define LOCHNAGAR2_PIN_PSIA1_RXDAT 50 +#define LOCHNAGAR2_PIN_PSIA1_LRCLK 51 +#define LOCHNAGAR2_PIN_PSIA1_TXDAT 52 +#define LOCHNAGAR2_PIN_PSIA2_BCLK 53 +#define LOCHNAGAR2_PIN_PSIA2_RXDAT 54 +#define LOCHNAGAR2_PIN_PSIA2_LRCLK 55 +#define LOCHNAGAR2_PIN_PSIA2_TXDAT 56 +#define LOCHNAGAR2_PIN_GF_AIF3_BCLK 57 +#define LOCHNAGAR2_PIN_GF_AIF3_RXDAT 58 +#define LOCHNAGAR2_PIN_GF_AIF3_LRCLK 59 +#define LOCHNAGAR2_PIN_GF_AIF3_TXDAT 60 +#define LOCHNAGAR2_PIN_GF_AIF4_BCLK 61 +#define LOCHNAGAR2_PIN_GF_AIF4_RXDAT 62 +#define LOCHNAGAR2_PIN_GF_AIF4_LRCLK 63 +#define LOCHNAGAR2_PIN_GF_AIF4_TXDAT 64 +#define LOCHNAGAR2_PIN_GF_AIF1_BCLK 65 +#define LOCHNAGAR2_PIN_GF_AIF1_RXDAT 66 +#define LOCHNAGAR2_PIN_GF_AIF1_LRCLK 67 +#define LOCHNAGAR2_PIN_GF_AIF1_TXDAT 68 +#define LOCHNAGAR2_PIN_GF_AIF2_BCLK 69 +#define LOCHNAGAR2_PIN_GF_AIF2_RXDAT 70 +#define LOCHNAGAR2_PIN_GF_AIF2_LRCLK 71 +#define LOCHNAGAR2_PIN_GF_AIF2_TXDAT 72 +#define LOCHNAGAR2_PIN_DSP_UART1_RX 73 +#define LOCHNAGAR2_PIN_DSP_UART1_TX 74 +#define LOCHNAGAR2_PIN_DSP_UART2_RX 75 +#define LOCHNAGAR2_PIN_DSP_UART2_TX 76 +#define LOCHNAGAR2_PIN_GF_UART2_RX 77 +#define LOCHNAGAR2_PIN_GF_UART2_TX 78 +#define LOCHNAGAR2_PIN_USB_UART_RX 79 +#define LOCHNAGAR2_PIN_CDC_PDMCLK1 80 +#define LOCHNAGAR2_PIN_CDC_PDMDAT1 81 +#define LOCHNAGAR2_PIN_CDC_PDMCLK2 82 +#define LOCHNAGAR2_PIN_CDC_PDMDAT2 83 +#define LOCHNAGAR2_PIN_CDC_DMICCLK1 84 +#define LOCHNAGAR2_PIN_CDC_DMICDAT1 85 +#define LOCHNAGAR2_PIN_CDC_DMICCLK2 86 +#define LOCHNAGAR2_PIN_CDC_DMICDAT2 87 +#define LOCHNAGAR2_PIN_CDC_DMICCLK3 88 +#define LOCHNAGAR2_PIN_CDC_DMICDAT3 89 +#define LOCHNAGAR2_PIN_CDC_DMICCLK4 90 +#define LOCHNAGAR2_PIN_CDC_DMICDAT4 91 +#define LOCHNAGAR2_PIN_DSP_DMICCLK1 92 +#define LOCHNAGAR2_PIN_DSP_DMICDAT1 93 +#define LOCHNAGAR2_PIN_DSP_DMICCLK2 94 +#define LOCHNAGAR2_PIN_DSP_DMICDAT2 95 +#define LOCHNAGAR2_PIN_I2C2_SCL 96 +#define LOCHNAGAR2_PIN_I2C2_SDA 97 +#define LOCHNAGAR2_PIN_I2C3_SCL 98 +#define LOCHNAGAR2_PIN_I2C3_SDA 99 +#define LOCHNAGAR2_PIN_I2C4_SCL 100 +#define LOCHNAGAR2_PIN_I2C4_SDA 101 +#define LOCHNAGAR2_PIN_DSP_STANDBY 102 +#define LOCHNAGAR2_PIN_CDC_MCLK1 103 +#define LOCHNAGAR2_PIN_CDC_MCLK2 104 +#define LOCHNAGAR2_PIN_DSP_CLKIN 105 +#define LOCHNAGAR2_PIN_PSIA1_MCLK 106 +#define LOCHNAGAR2_PIN_PSIA2_MCLK 107 +#define LOCHNAGAR2_PIN_GF_GPIO1 108 +#define LOCHNAGAR2_PIN_GF_GPIO5 109 +#define LOCHNAGAR2_PIN_DSP_GPIO20 110 +#define LOCHNAGAR2_PIN_NUM_GPIOS 111 + +#endif diff --git a/dts/include/dt-bindings/power/mt8173-power.h b/dts/include/dt-bindings/power/mt8173-power.h index 15d531aa6e..ef4a7f9448 100644 --- a/dts/include/dt-bindings/power/mt8173-power.h +++ b/dts/include/dt-bindings/power/mt8173-power.h @@ -1,6 +1,6 @@ /* SPDX-License-Identifier: GPL-2.0 */ -#ifndef _DT_BINDINGS_POWER_MT8183_POWER_H -#define _DT_BINDINGS_POWER_MT8183_POWER_H +#ifndef _DT_BINDINGS_POWER_MT8173_POWER_H +#define _DT_BINDINGS_POWER_MT8173_POWER_H #define MT8173_POWER_DOMAIN_VDEC 0 #define MT8173_POWER_DOMAIN_VENC 1 @@ -13,4 +13,4 @@ #define MT8173_POWER_DOMAIN_MFG_2D 8 #define MT8173_POWER_DOMAIN_MFG 9 -#endif /* _DT_BINDINGS_POWER_MT8183_POWER_H */ +#endif /* _DT_BINDINGS_POWER_MT8173_POWER_H */ diff --git a/dts/include/dt-bindings/power/qcom-rpmpd.h b/dts/include/dt-bindings/power/qcom-rpmpd.h new file mode 100644 index 0000000000..87d9c66116 --- /dev/null +++ b/dts/include/dt-bindings/power/qcom-rpmpd.h @@ -0,0 +1,39 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* Copyright (c) 2018, The Linux Foundation. All rights reserved. */ + +#ifndef _DT_BINDINGS_POWER_QCOM_RPMPD_H +#define _DT_BINDINGS_POWER_QCOM_RPMPD_H + +/* SDM845 Power Domain Indexes */ +#define SDM845_EBI 0 +#define SDM845_MX 1 +#define SDM845_MX_AO 2 +#define SDM845_CX 3 +#define SDM845_CX_AO 4 +#define SDM845_LMX 5 +#define SDM845_LCX 6 +#define SDM845_GFX 7 +#define SDM845_MSS 8 + +/* SDM845 Power Domain performance levels */ +#define RPMH_REGULATOR_LEVEL_RETENTION 16 +#define RPMH_REGULATOR_LEVEL_MIN_SVS 48 +#define RPMH_REGULATOR_LEVEL_LOW_SVS 64 +#define RPMH_REGULATOR_LEVEL_SVS 128 +#define RPMH_REGULATOR_LEVEL_SVS_L1 192 +#define RPMH_REGULATOR_LEVEL_NOM 256 +#define RPMH_REGULATOR_LEVEL_NOM_L1 320 +#define RPMH_REGULATOR_LEVEL_NOM_L2 336 +#define RPMH_REGULATOR_LEVEL_TURBO 384 +#define RPMH_REGULATOR_LEVEL_TURBO_L1 416 + +/* MSM8996 Power Domain Indexes */ +#define MSM8996_VDDCX 0 +#define MSM8996_VDDCX_AO 1 +#define MSM8996_VDDCX_VFC 2 +#define MSM8996_VDDMX 3 +#define MSM8996_VDDMX_AO 4 +#define MSM8996_VDDSSCX 5 +#define MSM8996_VDDSSCX_VFC 6 + +#endif diff --git a/dts/include/dt-bindings/power/xlnx-zynqmp-power.h b/dts/include/dt-bindings/power/xlnx-zynqmp-power.h new file mode 100644 index 0000000000..0d9a412fd5 --- /dev/null +++ b/dts/include/dt-bindings/power/xlnx-zynqmp-power.h @@ -0,0 +1,39 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2018 Xilinx, Inc. + */ + +#ifndef _DT_BINDINGS_ZYNQMP_POWER_H +#define _DT_BINDINGS_ZYNQMP_POWER_H + +#define PD_USB_0 22 +#define PD_USB_1 23 +#define PD_TTC_0 24 +#define PD_TTC_1 25 +#define PD_TTC_2 26 +#define PD_TTC_3 27 +#define PD_SATA 28 +#define PD_ETH_0 29 +#define PD_ETH_1 30 +#define PD_ETH_2 31 +#define PD_ETH_3 32 +#define PD_UART_0 33 +#define PD_UART_1 34 +#define PD_SPI_0 35 +#define PD_SPI_1 36 +#define PD_I2C_0 37 +#define PD_I2C_1 38 +#define PD_SD_0 39 +#define PD_SD_1 40 +#define PD_DP 41 +#define PD_GDMA 42 +#define PD_ADMA 43 +#define PD_NAND 44 +#define PD_QSPI 45 +#define PD_GPIO 46 +#define PD_CAN_0 47 +#define PD_CAN_1 48 +#define PD_GPU 58 +#define PD_PCIE 59 + +#endif diff --git a/dts/include/dt-bindings/reset/amlogic,meson-g12a-reset.h b/dts/include/dt-bindings/reset/amlogic,meson-g12a-reset.h new file mode 100644 index 0000000000..8063e8314e --- /dev/null +++ b/dts/include/dt-bindings/reset/amlogic,meson-g12a-reset.h @@ -0,0 +1,134 @@ +/* SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause */ +/* + * Copyright (c) 2019 BayLibre, SAS. + * Author: Jerome Brunet <jbrunet@baylibre.com> + * + */ + +#ifndef _DT_BINDINGS_AMLOGIC_MESON_G12A_RESET_H +#define _DT_BINDINGS_AMLOGIC_MESON_G12A_RESET_H + +/* RESET0 */ +#define RESET_HIU 0 +/* 1 */ +#define RESET_DOS 2 +/* 3-4 */ +#define RESET_VIU 5 +#define RESET_AFIFO 6 +#define RESET_VID_PLL_DIV 7 +/* 8-9 */ +#define RESET_VENC 10 +#define RESET_ASSIST 11 +#define RESET_PCIE_CTRL_A 12 +#define RESET_VCBUS 13 +#define RESET_PCIE_PHY 14 +#define RESET_PCIE_APB 15 +#define RESET_GIC 16 +#define RESET_CAPB3_DECODE 17 +/* 18 */ +#define RESET_HDMITX_CAPB3 19 +#define RESET_DVALIN_CAPB3 20 +#define RESET_DOS_CAPB3 21 +/* 22 */ +#define RESET_CBUS_CAPB3 23 +#define RESET_AHB_CNTL 24 +#define RESET_AHB_DATA 25 +#define RESET_VCBUS_CLK81 26 +/* 27-31 */ +/* RESET1 */ +/* 32 */ +#define RESET_DEMUX 33 +#define RESET_USB 34 +#define RESET_DDR 35 +/* 36 */ +#define RESET_BT656 37 +#define RESET_AHB_SRAM 38 +/* 39 */ +#define RESET_PARSER 40 +/* 41 */ +#define RESET_ISA 42 +#define RESET_ETHERNET 43 +#define RESET_SD_EMMC_A 44 +#define RESET_SD_EMMC_B 45 +#define RESET_SD_EMMC_C 46 +/* 47-60 */ +#define RESET_AUDIO_CODEC 61 +/* 62-63 */ +/* RESET2 */ +/* 64 */ +#define RESET_AUDIO 65 +#define RESET_HDMITX_PHY 66 +/* 67 */ +#define RESET_MIPI_DSI_HOST 68 +#define RESET_ALOCKER 69 +#define RESET_GE2D 70 +#define RESET_PARSER_REG 71 +#define RESET_PARSER_FETCH 72 +#define RESET_CTL 73 +#define RESET_PARSER_TOP 74 +/* 75-77 */ +#define RESET_DVALIN 78 +#define RESET_HDMITX 79 +/* 80-95 */ +/* RESET3 */ +/* 96-95 */ +#define RESET_DEMUX_TOP 105 +#define RESET_DEMUX_DES_PL 106 +#define RESET_DEMUX_S2P_0 107 +#define RESET_DEMUX_S2P_1 108 +#define RESET_DEMUX_0 109 +#define RESET_DEMUX_1 110 +#define RESET_DEMUX_2 111 +/* 112-127 */ +/* RESET4 */ +/* 128-129 */ +#define RESET_MIPI_DSI_PHY 130 +/* 131-132 */ +#define RESET_RDMA 133 +#define RESET_VENCI 134 +#define RESET_VENCP 135 +/* 136 */ +#define RESET_VDAC 137 +/* 138-139 */ +#define RESET_VDI6 140 +#define RESET_VENCL 141 +#define RESET_I2C_M1 142 +#define RESET_I2C_M2 143 +/* 144-159 */ +/* RESET5 */ +/* 160-191 */ +/* RESET6 */ +#define RESET_GEN 192 +#define RESET_SPICC0 193 +#define RESET_SC 194 +#define RESET_SANA_3 195 +#define RESET_I2C_M0 196 +#define RESET_TS_PLL 197 +#define RESET_SPICC1 198 +#define RESET_STREAM 199 +#define RESET_TS_CPU 200 +#define RESET_UART0 201 +#define RESET_UART1_2 202 +#define RESET_ASYNC0 203 +#define RESET_ASYNC1 204 +#define RESET_SPIFC0 205 +#define RESET_I2C_M3 206 +/* 207-223 */ +/* RESET7 */ +#define RESET_USB_DDR_0 224 +#define RESET_USB_DDR_1 225 +#define RESET_USB_DDR_2 226 +#define RESET_USB_DDR_3 227 +#define RESET_TS_GPU 228 +#define RESET_DEVICE_MMC_ARB 229 +#define RESET_DVALIN_DMC_PIPL 230 +#define RESET_VID_LOCK 231 +#define RESET_NIC_DMC_PIPL 232 +#define RESET_DMC_VPU_PIPL 233 +#define RESET_GE2D_DMC_PIPL 234 +#define RESET_HCODEC_DMC_PIPL 235 +#define RESET_WAVE420_DMC_PIPL 236 +#define RESET_HEVCF_DMC_PIPL 237 +/* 238-255 */ + +#endif diff --git a/dts/include/dt-bindings/reset/g12a-aoclkc.h b/dts/include/dt-bindings/reset/g12a-aoclkc.h new file mode 100644 index 0000000000..bd2e233713 --- /dev/null +++ b/dts/include/dt-bindings/reset/g12a-aoclkc.h @@ -0,0 +1,18 @@ +/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */ +/* + * Copyright (c) 2016 BayLibre, SAS + * Author: Neil Armstrong <narmstrong@baylibre.com> + */ + +#ifndef DT_BINDINGS_RESET_AMLOGIC_MESON_G12A_AOCLK +#define DT_BINDINGS_RESET_AMLOGIC_MESON_G12A_AOCLK + +#define RESET_AO_IR_IN 0 +#define RESET_AO_UART 1 +#define RESET_AO_I2C_M 2 +#define RESET_AO_I2C_S 3 +#define RESET_AO_SAR_ADC 4 +#define RESET_AO_UART2 5 +#define RESET_AO_IR_OUT 6 + +#endif diff --git a/dts/include/dt-bindings/reset/imx8mq-reset.h b/dts/include/dt-bindings/reset/imx8mq-reset.h new file mode 100644 index 0000000000..57c592498a --- /dev/null +++ b/dts/include/dt-bindings/reset/imx8mq-reset.h @@ -0,0 +1,64 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2018 Zodiac Inflight Innovations + * + * Author: Andrey Smirnov <andrew.smirnov@gmail.com> + */ + +#ifndef DT_BINDING_RESET_IMX8MQ_H +#define DT_BINDING_RESET_IMX8MQ_H + +#define IMX8MQ_RESET_A53_CORE_POR_RESET0 0 +#define IMX8MQ_RESET_A53_CORE_POR_RESET1 1 +#define IMX8MQ_RESET_A53_CORE_POR_RESET2 2 +#define IMX8MQ_RESET_A53_CORE_POR_RESET3 3 +#define IMX8MQ_RESET_A53_CORE_RESET0 4 +#define IMX8MQ_RESET_A53_CORE_RESET1 5 +#define IMX8MQ_RESET_A53_CORE_RESET2 6 +#define IMX8MQ_RESET_A53_CORE_RESET3 7 +#define IMX8MQ_RESET_A53_DBG_RESET0 8 +#define IMX8MQ_RESET_A53_DBG_RESET1 9 +#define IMX8MQ_RESET_A53_DBG_RESET2 10 +#define IMX8MQ_RESET_A53_DBG_RESET3 11 +#define IMX8MQ_RESET_A53_ETM_RESET0 12 +#define IMX8MQ_RESET_A53_ETM_RESET1 13 +#define IMX8MQ_RESET_A53_ETM_RESET2 14 +#define IMX8MQ_RESET_A53_ETM_RESET3 15 +#define IMX8MQ_RESET_A53_SOC_DBG_RESET 16 +#define IMX8MQ_RESET_A53_L2RESET 17 +#define IMX8MQ_RESET_SW_NON_SCLR_M4C_RST 18 +#define IMX8MQ_RESET_OTG1_PHY_RESET 19 +#define IMX8MQ_RESET_OTG2_PHY_RESET 20 +#define IMX8MQ_RESET_MIPI_DSI_RESET_BYTE_N 21 +#define IMX8MQ_RESET_MIPI_DSI_RESET_N 22 +#define IMX8MQ_RESET_MIPI_DIS_DPI_RESET_N 23 +#define IMX8MQ_RESET_MIPI_DIS_ESC_RESET_N 24 +#define IMX8MQ_RESET_MIPI_DIS_PCLK_RESET_N 25 +#define IMX8MQ_RESET_PCIEPHY 26 +#define IMX8MQ_RESET_PCIEPHY_PERST 27 +#define IMX8MQ_RESET_PCIE_CTRL_APPS_EN 28 +#define IMX8MQ_RESET_PCIE_CTRL_APPS_TURNOFF 29 +#define IMX8MQ_RESET_HDMI_PHY_APB_RESET 30 +#define IMX8MQ_RESET_DISP_RESET 31 +#define IMX8MQ_RESET_GPU_RESET 32 +#define IMX8MQ_RESET_VPU_RESET 33 +#define IMX8MQ_RESET_PCIEPHY2 34 +#define IMX8MQ_RESET_PCIEPHY2_PERST 35 +#define IMX8MQ_RESET_PCIE2_CTRL_APPS_EN 36 +#define IMX8MQ_RESET_PCIE2_CTRL_APPS_TURNOFF 37 +#define IMX8MQ_RESET_MIPI_CSI1_CORE_RESET 38 +#define IMX8MQ_RESET_MIPI_CSI1_PHY_REF_RESET 39 +#define IMX8MQ_RESET_MIPI_CSI1_ESC_RESET 40 +#define IMX8MQ_RESET_MIPI_CSI2_CORE_RESET 41 +#define IMX8MQ_RESET_MIPI_CSI2_PHY_REF_RESET 42 +#define IMX8MQ_RESET_MIPI_CSI2_ESC_RESET 43 +#define IMX8MQ_RESET_DDRC1_PRST 44 +#define IMX8MQ_RESET_DDRC1_CORE_RESET 45 +#define IMX8MQ_RESET_DDRC1_PHY_RESET 46 +#define IMX8MQ_RESET_DDRC2_PRST 47 +#define IMX8MQ_RESET_DDRC2_CORE_RESET 48 +#define IMX8MQ_RESET_DDRC2_PHY_RESET 49 + +#define IMX8MQ_RESET_NUM 50 + +#endif diff --git a/dts/include/dt-bindings/reset/xlnx-zynqmp-resets.h b/dts/include/dt-bindings/reset/xlnx-zynqmp-resets.h new file mode 100644 index 0000000000..d44525b9f8 --- /dev/null +++ b/dts/include/dt-bindings/reset/xlnx-zynqmp-resets.h @@ -0,0 +1,130 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2018 Xilinx, Inc. + */ + +#ifndef _DT_BINDINGS_ZYNQMP_RESETS_H +#define _DT_BINDINGS_ZYNQMP_RESETS_H + +#define ZYNQMP_RESET_PCIE_CFG 0 +#define ZYNQMP_RESET_PCIE_BRIDGE 1 +#define ZYNQMP_RESET_PCIE_CTRL 2 +#define ZYNQMP_RESET_DP 3 +#define ZYNQMP_RESET_SWDT_CRF 4 +#define ZYNQMP_RESET_AFI_FM5 5 +#define ZYNQMP_RESET_AFI_FM4 6 +#define ZYNQMP_RESET_AFI_FM3 7 +#define ZYNQMP_RESET_AFI_FM2 8 +#define ZYNQMP_RESET_AFI_FM1 9 +#define ZYNQMP_RESET_AFI_FM0 10 +#define ZYNQMP_RESET_GDMA 11 +#define ZYNQMP_RESET_GPU_PP1 12 +#define ZYNQMP_RESET_GPU_PP0 13 +#define ZYNQMP_RESET_GPU 14 +#define ZYNQMP_RESET_GT 15 +#define ZYNQMP_RESET_SATA 16 +#define ZYNQMP_RESET_ACPU3_PWRON 17 +#define ZYNQMP_RESET_ACPU2_PWRON 18 +#define ZYNQMP_RESET_ACPU1_PWRON 19 +#define ZYNQMP_RESET_ACPU0_PWRON 20 +#define ZYNQMP_RESET_APU_L2 21 +#define ZYNQMP_RESET_ACPU3 22 +#define ZYNQMP_RESET_ACPU2 23 +#define ZYNQMP_RESET_ACPU1 24 +#define ZYNQMP_RESET_ACPU0 25 +#define ZYNQMP_RESET_DDR 26 +#define ZYNQMP_RESET_APM_FPD 27 +#define ZYNQMP_RESET_SOFT 28 +#define ZYNQMP_RESET_GEM0 29 +#define ZYNQMP_RESET_GEM1 30 +#define ZYNQMP_RESET_GEM2 31 +#define ZYNQMP_RESET_GEM3 32 +#define ZYNQMP_RESET_QSPI 33 +#define ZYNQMP_RESET_UART0 34 +#define ZYNQMP_RESET_UART1 35 +#define ZYNQMP_RESET_SPI0 36 +#define ZYNQMP_RESET_SPI1 37 +#define ZYNQMP_RESET_SDIO0 38 +#define ZYNQMP_RESET_SDIO1 39 +#define ZYNQMP_RESET_CAN0 40 +#define ZYNQMP_RESET_CAN1 41 +#define ZYNQMP_RESET_I2C0 42 +#define ZYNQMP_RESET_I2C1 43 +#define ZYNQMP_RESET_TTC0 44 +#define ZYNQMP_RESET_TTC1 45 +#define ZYNQMP_RESET_TTC2 46 +#define ZYNQMP_RESET_TTC3 47 +#define ZYNQMP_RESET_SWDT_CRL 48 +#define ZYNQMP_RESET_NAND 49 +#define ZYNQMP_RESET_ADMA 50 +#define ZYNQMP_RESET_GPIO 51 +#define ZYNQMP_RESET_IOU_CC 52 +#define ZYNQMP_RESET_TIMESTAMP 53 +#define ZYNQMP_RESET_RPU_R50 54 +#define ZYNQMP_RESET_RPU_R51 55 +#define ZYNQMP_RESET_RPU_AMBA 56 +#define ZYNQMP_RESET_OCM 57 +#define ZYNQMP_RESET_RPU_PGE 58 +#define ZYNQMP_RESET_USB0_CORERESET 59 +#define ZYNQMP_RESET_USB1_CORERESET 60 +#define ZYNQMP_RESET_USB0_HIBERRESET 61 +#define ZYNQMP_RESET_USB1_HIBERRESET 62 +#define ZYNQMP_RESET_USB0_APB 63 +#define ZYNQMP_RESET_USB1_APB 64 +#define ZYNQMP_RESET_IPI 65 +#define ZYNQMP_RESET_APM_LPD 66 +#define ZYNQMP_RESET_RTC 67 +#define ZYNQMP_RESET_SYSMON 68 +#define ZYNQMP_RESET_AFI_FM6 69 +#define ZYNQMP_RESET_LPD_SWDT 70 +#define ZYNQMP_RESET_FPD 71 +#define ZYNQMP_RESET_RPU_DBG1 72 +#define ZYNQMP_RESET_RPU_DBG0 73 +#define ZYNQMP_RESET_DBG_LPD 74 +#define ZYNQMP_RESET_DBG_FPD 75 +#define ZYNQMP_RESET_APLL 76 +#define ZYNQMP_RESET_DPLL 77 +#define ZYNQMP_RESET_VPLL 78 +#define ZYNQMP_RESET_IOPLL 79 +#define ZYNQMP_RESET_RPLL 80 +#define ZYNQMP_RESET_GPO3_PL_0 81 +#define ZYNQMP_RESET_GPO3_PL_1 82 +#define ZYNQMP_RESET_GPO3_PL_2 83 +#define ZYNQMP_RESET_GPO3_PL_3 84 +#define ZYNQMP_RESET_GPO3_PL_4 85 +#define ZYNQMP_RESET_GPO3_PL_5 86 +#define ZYNQMP_RESET_GPO3_PL_6 87 +#define ZYNQMP_RESET_GPO3_PL_7 88 +#define ZYNQMP_RESET_GPO3_PL_8 89 +#define ZYNQMP_RESET_GPO3_PL_9 90 +#define ZYNQMP_RESET_GPO3_PL_10 91 +#define ZYNQMP_RESET_GPO3_PL_11 92 +#define ZYNQMP_RESET_GPO3_PL_12 93 +#define ZYNQMP_RESET_GPO3_PL_13 94 +#define ZYNQMP_RESET_GPO3_PL_14 95 +#define ZYNQMP_RESET_GPO3_PL_15 96 +#define ZYNQMP_RESET_GPO3_PL_16 97 +#define ZYNQMP_RESET_GPO3_PL_17 98 +#define ZYNQMP_RESET_GPO3_PL_18 99 +#define ZYNQMP_RESET_GPO3_PL_19 100 +#define ZYNQMP_RESET_GPO3_PL_20 101 +#define ZYNQMP_RESET_GPO3_PL_21 102 +#define ZYNQMP_RESET_GPO3_PL_22 103 +#define ZYNQMP_RESET_GPO3_PL_23 104 +#define ZYNQMP_RESET_GPO3_PL_24 105 +#define ZYNQMP_RESET_GPO3_PL_25 106 +#define ZYNQMP_RESET_GPO3_PL_26 107 +#define ZYNQMP_RESET_GPO3_PL_27 108 +#define ZYNQMP_RESET_GPO3_PL_28 109 +#define ZYNQMP_RESET_GPO3_PL_29 110 +#define ZYNQMP_RESET_GPO3_PL_30 111 +#define ZYNQMP_RESET_GPO3_PL_31 112 +#define ZYNQMP_RESET_RPU_LS 113 +#define ZYNQMP_RESET_PS_ONLY 114 +#define ZYNQMP_RESET_PL 115 +#define ZYNQMP_RESET_PS_PL0 116 +#define ZYNQMP_RESET_PS_PL1 117 +#define ZYNQMP_RESET_PS_PL2 118 +#define ZYNQMP_RESET_PS_PL3 119 + +#endif diff --git a/dts/include/dt-bindings/soc/bcm2835-pm.h b/dts/include/dt-bindings/soc/bcm2835-pm.h new file mode 100644 index 0000000000..153d75b8d9 --- /dev/null +++ b/dts/include/dt-bindings/soc/bcm2835-pm.h @@ -0,0 +1,28 @@ +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ + +#ifndef _DT_BINDINGS_ARM_BCM2835_PM_H +#define _DT_BINDINGS_ARM_BCM2835_PM_H + +#define BCM2835_POWER_DOMAIN_GRAFX 0 +#define BCM2835_POWER_DOMAIN_GRAFX_V3D 1 +#define BCM2835_POWER_DOMAIN_IMAGE 2 +#define BCM2835_POWER_DOMAIN_IMAGE_PERI 3 +#define BCM2835_POWER_DOMAIN_IMAGE_ISP 4 +#define BCM2835_POWER_DOMAIN_IMAGE_H264 5 +#define BCM2835_POWER_DOMAIN_USB 6 +#define BCM2835_POWER_DOMAIN_DSI0 7 +#define BCM2835_POWER_DOMAIN_DSI1 8 +#define BCM2835_POWER_DOMAIN_CAM0 9 +#define BCM2835_POWER_DOMAIN_CAM1 10 +#define BCM2835_POWER_DOMAIN_CCP2TX 11 +#define BCM2835_POWER_DOMAIN_HDMI 12 + +#define BCM2835_POWER_DOMAIN_COUNT 13 + +#define BCM2835_RESET_V3D 0 +#define BCM2835_RESET_ISP 1 +#define BCM2835_RESET_H264 2 + +#define BCM2835_RESET_COUNT 3 + +#endif /* _DT_BINDINGS_ARM_BCM2835_PM_H */ diff --git a/dts/src/arc/abilis_tb100.dtsi b/dts/src/arc/abilis_tb100.dtsi index 02410b2114..c0bcd97522 100644 --- a/dts/src/arc/abilis_tb100.dtsi +++ b/dts/src/arc/abilis_tb100.dtsi @@ -38,7 +38,7 @@ clock-div = <6>; }; - iomux: iomux@FF10601c { + iomux: iomux@ff10601c { /* Port 1 */ pctl_tsin_s0: pctl-tsin-s0 { /* Serial TS-in 0 */ abilis,function = "mis0"; @@ -162,182 +162,182 @@ }; }; - gpioa: gpio@FF140000 { + gpioa: gpio@ff140000 { compatible = "abilis,tb10x-gpio"; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&tb10x_ictl>; interrupts = <27 2>; - reg = <0xFF140000 0x1000>; + reg = <0xff140000 0x1000>; gpio-controller; #gpio-cells = <2>; abilis,ngpio = <3>; gpio-ranges = <&iomux 0 0 0>; gpio-ranges-group-names = "gpioa"; }; - gpiob: gpio@FF141000 { + gpiob: gpio@ff141000 { compatible = "abilis,tb10x-gpio"; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&tb10x_ictl>; interrupts = <27 2>; - reg = <0xFF141000 0x1000>; + reg = <0xff141000 0x1000>; gpio-controller; #gpio-cells = <2>; abilis,ngpio = <2>; gpio-ranges = <&iomux 0 0 0>; gpio-ranges-group-names = "gpiob"; }; - gpioc: gpio@FF142000 { + gpioc: gpio@ff142000 { compatible = "abilis,tb10x-gpio"; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&tb10x_ictl>; interrupts = <27 2>; - reg = <0xFF142000 0x1000>; + reg = <0xff142000 0x1000>; gpio-controller; #gpio-cells = <2>; abilis,ngpio = <3>; gpio-ranges = <&iomux 0 0 0>; gpio-ranges-group-names = "gpioc"; }; - gpiod: gpio@FF143000 { + gpiod: gpio@ff143000 { compatible = "abilis,tb10x-gpio"; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&tb10x_ictl>; interrupts = <27 2>; - reg = <0xFF143000 0x1000>; + reg = <0xff143000 0x1000>; gpio-controller; #gpio-cells = <2>; abilis,ngpio = <2>; gpio-ranges = <&iomux 0 0 0>; gpio-ranges-group-names = "gpiod"; }; - gpioe: gpio@FF144000 { + gpioe: gpio@ff144000 { compatible = "abilis,tb10x-gpio"; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&tb10x_ictl>; interrupts = <27 2>; - reg = <0xFF144000 0x1000>; + reg = <0xff144000 0x1000>; gpio-controller; #gpio-cells = <2>; abilis,ngpio = <3>; gpio-ranges = <&iomux 0 0 0>; gpio-ranges-group-names = "gpioe"; }; - gpiof: gpio@FF145000 { + gpiof: gpio@ff145000 { compatible = "abilis,tb10x-gpio"; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&tb10x_ictl>; interrupts = <27 2>; - reg = <0xFF145000 0x1000>; + reg = <0xff145000 0x1000>; gpio-controller; #gpio-cells = <2>; abilis,ngpio = <2>; gpio-ranges = <&iomux 0 0 0>; gpio-ranges-group-names = "gpiof"; }; - gpiog: gpio@FF146000 { + gpiog: gpio@ff146000 { compatible = "abilis,tb10x-gpio"; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&tb10x_ictl>; interrupts = <27 2>; - reg = <0xFF146000 0x1000>; + reg = <0xff146000 0x1000>; gpio-controller; #gpio-cells = <2>; abilis,ngpio = <3>; gpio-ranges = <&iomux 0 0 0>; gpio-ranges-group-names = "gpiog"; }; - gpioh: gpio@FF147000 { + gpioh: gpio@ff147000 { compatible = "abilis,tb10x-gpio"; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&tb10x_ictl>; interrupts = <27 2>; - reg = <0xFF147000 0x1000>; + reg = <0xff147000 0x1000>; gpio-controller; #gpio-cells = <2>; abilis,ngpio = <2>; gpio-ranges = <&iomux 0 0 0>; gpio-ranges-group-names = "gpioh"; }; - gpioi: gpio@FF148000 { + gpioi: gpio@ff148000 { compatible = "abilis,tb10x-gpio"; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&tb10x_ictl>; interrupts = <27 2>; - reg = <0xFF148000 0x1000>; + reg = <0xff148000 0x1000>; gpio-controller; #gpio-cells = <2>; abilis,ngpio = <12>; gpio-ranges = <&iomux 0 0 0>; gpio-ranges-group-names = "gpioi"; }; - gpioj: gpio@FF149000 { + gpioj: gpio@ff149000 { compatible = "abilis,tb10x-gpio"; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&tb10x_ictl>; interrupts = <27 2>; - reg = <0xFF149000 0x1000>; + reg = <0xff149000 0x1000>; gpio-controller; #gpio-cells = <2>; abilis,ngpio = <32>; gpio-ranges = <&iomux 0 0 0>; gpio-ranges-group-names = "gpioj"; }; - gpiok: gpio@FF14a000 { + gpiok: gpio@ff14a000 { compatible = "abilis,tb10x-gpio"; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&tb10x_ictl>; interrupts = <27 2>; - reg = <0xFF14A000 0x1000>; + reg = <0xff14a000 0x1000>; gpio-controller; #gpio-cells = <2>; abilis,ngpio = <22>; gpio-ranges = <&iomux 0 0 0>; gpio-ranges-group-names = "gpiok"; }; - gpiol: gpio@FF14b000 { + gpiol: gpio@ff14b000 { compatible = "abilis,tb10x-gpio"; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&tb10x_ictl>; interrupts = <27 2>; - reg = <0xFF14B000 0x1000>; + reg = <0xff14b000 0x1000>; gpio-controller; #gpio-cells = <2>; abilis,ngpio = <4>; gpio-ranges = <&iomux 0 0 0>; gpio-ranges-group-names = "gpiol"; }; - gpiom: gpio@FF14c000 { + gpiom: gpio@ff14c000 { compatible = "abilis,tb10x-gpio"; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&tb10x_ictl>; interrupts = <27 2>; - reg = <0xFF14C000 0x1000>; + reg = <0xff14c000 0x1000>; gpio-controller; #gpio-cells = <2>; abilis,ngpio = <4>; gpio-ranges = <&iomux 0 0 0>; gpio-ranges-group-names = "gpiom"; }; - gpion: gpio@FF14d000 { + gpion: gpio@ff14d000 { compatible = "abilis,tb10x-gpio"; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&tb10x_ictl>; interrupts = <27 2>; - reg = <0xFF14D000 0x1000>; + reg = <0xff14d000 0x1000>; gpio-controller; #gpio-cells = <2>; abilis,ngpio = <5>; diff --git a/dts/src/arc/abilis_tb100_dvk.dts b/dts/src/arc/abilis_tb100_dvk.dts index 3acf04db80..c968e677db 100644 --- a/dts/src/arc/abilis_tb100_dvk.dts +++ b/dts/src/arc/abilis_tb100_dvk.dts @@ -37,27 +37,27 @@ }; soc100 { - uart@FF100000 { + uart@ff100000 { pinctrl-names = "default"; pinctrl-0 = <&pctl_uart0>; }; - ethernet@FE100000 { + ethernet@fe100000 { phy-mode = "rgmii"; }; - i2c0: i2c@FF120000 { + i2c0: i2c@ff120000 { i2c-sda-hold-time-ns = <432>; }; - i2c1: i2c@FF121000 { + i2c1: i2c@ff121000 { i2c-sda-hold-time-ns = <432>; }; - i2c2: i2c@FF122000 { + i2c2: i2c@ff122000 { i2c-sda-hold-time-ns = <432>; }; - i2c3: i2c@FF123000 { + i2c3: i2c@ff123000 { i2c-sda-hold-time-ns = <432>; }; - i2c4: i2c@FF124000 { + i2c4: i2c@ff124000 { i2c-sda-hold-time-ns = <432>; }; diff --git a/dts/src/arc/abilis_tb101.dtsi b/dts/src/arc/abilis_tb101.dtsi index f9e7686044..6a1615f58f 100644 --- a/dts/src/arc/abilis_tb101.dtsi +++ b/dts/src/arc/abilis_tb101.dtsi @@ -38,7 +38,7 @@ clock-div = <6>; }; - iomux: iomux@FF10601c { + iomux: iomux@ff10601c { /* Port 1 */ pctl_tsin_s0: pctl-tsin-s0 { /* Serial TS-in 0 */ abilis,function = "mis0"; @@ -171,182 +171,182 @@ }; }; - gpioa: gpio@FF140000 { + gpioa: gpio@ff140000 { compatible = "abilis,tb10x-gpio"; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&tb10x_ictl>; interrupts = <27 2>; - reg = <0xFF140000 0x1000>; + reg = <0xff140000 0x1000>; gpio-controller; #gpio-cells = <2>; abilis,ngpio = <3>; gpio-ranges = <&iomux 0 0 0>; gpio-ranges-group-names = "gpioa"; }; - gpiob: gpio@FF141000 { + gpiob: gpio@ff141000 { compatible = "abilis,tb10x-gpio"; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&tb10x_ictl>; interrupts = <27 2>; - reg = <0xFF141000 0x1000>; + reg = <0xff141000 0x1000>; gpio-controller; #gpio-cells = <2>; abilis,ngpio = <2>; gpio-ranges = <&iomux 0 0 0>; gpio-ranges-group-names = "gpiob"; }; - gpioc: gpio@FF142000 { + gpioc: gpio@ff142000 { compatible = "abilis,tb10x-gpio"; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&tb10x_ictl>; interrupts = <27 2>; - reg = <0xFF142000 0x1000>; + reg = <0xff142000 0x1000>; gpio-controller; #gpio-cells = <2>; abilis,ngpio = <3>; gpio-ranges = <&iomux 0 0 0>; gpio-ranges-group-names = "gpioc"; }; - gpiod: gpio@FF143000 { + gpiod: gpio@ff143000 { compatible = "abilis,tb10x-gpio"; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&tb10x_ictl>; interrupts = <27 2>; - reg = <0xFF143000 0x1000>; + reg = <0xff143000 0x1000>; gpio-controller; #gpio-cells = <2>; abilis,ngpio = <2>; gpio-ranges = <&iomux 0 0 0>; gpio-ranges-group-names = "gpiod"; }; - gpioe: gpio@FF144000 { + gpioe: gpio@ff144000 { compatible = "abilis,tb10x-gpio"; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&tb10x_ictl>; interrupts = <27 2>; - reg = <0xFF144000 0x1000>; + reg = <0xff144000 0x1000>; gpio-controller; #gpio-cells = <2>; abilis,ngpio = <3>; gpio-ranges = <&iomux 0 0 0>; gpio-ranges-group-names = "gpioe"; }; - gpiof: gpio@FF145000 { + gpiof: gpio@ff145000 { compatible = "abilis,tb10x-gpio"; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&tb10x_ictl>; interrupts = <27 2>; - reg = <0xFF145000 0x1000>; + reg = <0xff145000 0x1000>; gpio-controller; #gpio-cells = <2>; abilis,ngpio = <2>; gpio-ranges = <&iomux 0 0 0>; gpio-ranges-group-names = "gpiof"; }; - gpiog: gpio@FF146000 { + gpiog: gpio@ff146000 { compatible = "abilis,tb10x-gpio"; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&tb10x_ictl>; interrupts = <27 2>; - reg = <0xFF146000 0x1000>; + reg = <0xff146000 0x1000>; gpio-controller; #gpio-cells = <2>; abilis,ngpio = <3>; gpio-ranges = <&iomux 0 0 0>; gpio-ranges-group-names = "gpiog"; }; - gpioh: gpio@FF147000 { + gpioh: gpio@ff147000 { compatible = "abilis,tb10x-gpio"; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&tb10x_ictl>; interrupts = <27 2>; - reg = <0xFF147000 0x1000>; + reg = <0xff147000 0x1000>; gpio-controller; #gpio-cells = <2>; abilis,ngpio = <2>; gpio-ranges = <&iomux 0 0 0>; gpio-ranges-group-names = "gpioh"; }; - gpioi: gpio@FF148000 { + gpioi: gpio@ff148000 { compatible = "abilis,tb10x-gpio"; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&tb10x_ictl>; interrupts = <27 2>; - reg = <0xFF148000 0x1000>; + reg = <0xff148000 0x1000>; gpio-controller; #gpio-cells = <2>; abilis,ngpio = <12>; gpio-ranges = <&iomux 0 0 0>; gpio-ranges-group-names = "gpioi"; }; - gpioj: gpio@FF149000 { + gpioj: gpio@ff149000 { compatible = "abilis,tb10x-gpio"; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&tb10x_ictl>; interrupts = <27 2>; - reg = <0xFF149000 0x1000>; + reg = <0xff149000 0x1000>; gpio-controller; #gpio-cells = <2>; abilis,ngpio = <32>; gpio-ranges = <&iomux 0 0 0>; gpio-ranges-group-names = "gpioj"; }; - gpiok: gpio@FF14a000 { + gpiok: gpio@ff14a000 { compatible = "abilis,tb10x-gpio"; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&tb10x_ictl>; interrupts = <27 2>; - reg = <0xFF14A000 0x1000>; + reg = <0xff14a000 0x1000>; gpio-controller; #gpio-cells = <2>; abilis,ngpio = <22>; gpio-ranges = <&iomux 0 0 0>; gpio-ranges-group-names = "gpiok"; }; - gpiol: gpio@FF14b000 { + gpiol: gpio@ff14b000 { compatible = "abilis,tb10x-gpio"; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&tb10x_ictl>; interrupts = <27 2>; - reg = <0xFF14B000 0x1000>; + reg = <0xff14b000 0x1000>; gpio-controller; #gpio-cells = <2>; abilis,ngpio = <4>; gpio-ranges = <&iomux 0 0 0>; gpio-ranges-group-names = "gpiol"; }; - gpiom: gpio@FF14c000 { + gpiom: gpio@ff14c000 { compatible = "abilis,tb10x-gpio"; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&tb10x_ictl>; interrupts = <27 2>; - reg = <0xFF14C000 0x1000>; + reg = <0xff14c000 0x1000>; gpio-controller; #gpio-cells = <2>; abilis,ngpio = <4>; gpio-ranges = <&iomux 0 0 0>; gpio-ranges-group-names = "gpiom"; }; - gpion: gpio@FF14d000 { + gpion: gpio@ff14d000 { compatible = "abilis,tb10x-gpio"; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&tb10x_ictl>; interrupts = <27 2>; - reg = <0xFF14D000 0x1000>; + reg = <0xff14d000 0x1000>; gpio-controller; #gpio-cells = <2>; abilis,ngpio = <5>; diff --git a/dts/src/arc/abilis_tb101_dvk.dts b/dts/src/arc/abilis_tb101_dvk.dts index 37d88c5dd1..05143ce9c1 100644 --- a/dts/src/arc/abilis_tb101_dvk.dts +++ b/dts/src/arc/abilis_tb101_dvk.dts @@ -37,27 +37,27 @@ }; soc100 { - uart@FF100000 { + uart@ff100000 { pinctrl-names = "default"; pinctrl-0 = <&pctl_uart0>; }; - ethernet@FE100000 { + ethernet@fe100000 { phy-mode = "rgmii"; }; - i2c0: i2c@FF120000 { + i2c0: i2c@ff120000 { i2c-sda-hold-time-ns = <432>; }; - i2c1: i2c@FF121000 { + i2c1: i2c@ff121000 { i2c-sda-hold-time-ns = <432>; }; - i2c2: i2c@FF122000 { + i2c2: i2c@ff122000 { i2c-sda-hold-time-ns = <432>; }; - i2c3: i2c@FF123000 { + i2c3: i2c@ff123000 { i2c-sda-hold-time-ns = <432>; }; - i2c4: i2c@FF124000 { + i2c4: i2c@ff124000 { i2c-sda-hold-time-ns = <432>; }; diff --git a/dts/src/arc/abilis_tb10x.dtsi b/dts/src/arc/abilis_tb10x.dtsi index 3121536b25..2fbf1bdfe6 100644 --- a/dts/src/arc/abilis_tb10x.dtsi +++ b/dts/src/arc/abilis_tb10x.dtsi @@ -54,7 +54,7 @@ #size-cells = <1>; device_type = "soc"; ranges = <0xfe000000 0xfe000000 0x02000000 - 0x000F0000 0x000F0000 0x00010000>; + 0x000f0000 0x000f0000 0x00010000>; compatible = "abilis,tb10x", "simple-bus"; pll0: oscillator { @@ -75,10 +75,10 @@ clock-output-names = "ahb_clk"; }; - iomux: iomux@FF10601c { + iomux: iomux@ff10601c { compatible = "abilis,tb10x-iomux"; #gpio-range-cells = <3>; - reg = <0xFF10601c 0x4>; + reg = <0xff10601c 0x4>; }; intc: interrupt-controller { @@ -88,7 +88,7 @@ }; tb10x_ictl: pic@fe002000 { compatible = "abilis,tb10x-ictl"; - reg = <0xFE002000 0x20>; + reg = <0xfe002000 0x20>; interrupt-controller; #interrupt-cells = <2>; interrupt-parent = <&intc>; @@ -96,27 +96,27 @@ 20 21 22 23 24 25 26 27 28 29 30 31>; }; - uart@FF100000 { + uart@ff100000 { compatible = "snps,dw-apb-uart"; - reg = <0xFF100000 0x100>; + reg = <0xff100000 0x100>; clock-frequency = <166666666>; interrupts = <25 8>; reg-shift = <2>; reg-io-width = <4>; interrupt-parent = <&tb10x_ictl>; }; - ethernet@FE100000 { + ethernet@fe100000 { compatible = "snps,dwmac-3.70a","snps,dwmac"; - reg = <0xFE100000 0x1058>; + reg = <0xfe100000 0x1058>; interrupt-parent = <&tb10x_ictl>; interrupts = <6 8>; interrupt-names = "macirq"; clocks = <&ahb_clk>; clock-names = "stmmaceth"; }; - dma@FE000000 { + dma@fe000000 { compatible = "snps,dma-spear1340"; - reg = <0xFE000000 0x400>; + reg = <0xfe000000 0x400>; interrupt-parent = <&tb10x_ictl>; interrupts = <14 8>; dma-channels = <6>; @@ -132,70 +132,70 @@ multi-block = <1 1 1 1 1 1>; }; - i2c0: i2c@FF120000 { + i2c0: i2c@ff120000 { #address-cells = <1>; #size-cells = <0>; compatible = "snps,designware-i2c"; - reg = <0xFF120000 0x1000>; + reg = <0xff120000 0x1000>; interrupt-parent = <&tb10x_ictl>; interrupts = <12 8>; clocks = <&ahb_clk>; }; - i2c1: i2c@FF121000 { + i2c1: i2c@ff121000 { #address-cells = <1>; #size-cells = <0>; compatible = "snps,designware-i2c"; - reg = <0xFF121000 0x1000>; + reg = <0xff121000 0x1000>; interrupt-parent = <&tb10x_ictl>; interrupts = <12 8>; clocks = <&ahb_clk>; }; - i2c2: i2c@FF122000 { + i2c2: i2c@ff122000 { #address-cells = <1>; #size-cells = <0>; compatible = "snps,designware-i2c"; - reg = <0xFF122000 0x1000>; + reg = <0xff122000 0x1000>; interrupt-parent = <&tb10x_ictl>; interrupts = <12 8>; clocks = <&ahb_clk>; }; - i2c3: i2c@FF123000 { + i2c3: i2c@ff123000 { #address-cells = <1>; #size-cells = <0>; compatible = "snps,designware-i2c"; - reg = <0xFF123000 0x1000>; + reg = <0xff123000 0x1000>; interrupt-parent = <&tb10x_ictl>; interrupts = <12 8>; clocks = <&ahb_clk>; }; - i2c4: i2c@FF124000 { + i2c4: i2c@ff124000 { #address-cells = <1>; #size-cells = <0>; compatible = "snps,designware-i2c"; - reg = <0xFF124000 0x1000>; + reg = <0xff124000 0x1000>; interrupt-parent = <&tb10x_ictl>; interrupts = <12 8>; clocks = <&ahb_clk>; }; - spi0: spi@0xFE010000 { + spi0: spi@fe010000 { #address-cells = <1>; #size-cells = <0>; cell-index = <0>; compatible = "abilis,tb100-spi"; num-cs = <1>; - reg = <0xFE010000 0x20>; + reg = <0xfe010000 0x20>; interrupt-parent = <&tb10x_ictl>; interrupts = <26 8>; clocks = <&ahb_clk>; }; - spi1: spi@0xFE011000 { + spi1: spi@fe011000 { #address-cells = <1>; #size-cells = <0>; cell-index = <1>; compatible = "abilis,tb100-spi"; num-cs = <2>; - reg = <0xFE011000 0x20>; + reg = <0xfe011000 0x20>; interrupt-parent = <&tb10x_ictl>; interrupts = <10 8>; clocks = <&ahb_clk>; @@ -226,23 +226,23 @@ interrupts = <20 2>, <19 2>; interrupt-names = "cmd_irq", "event_irq"; }; - tb10x_mdsc0: tb10x-mdscr@FF300000 { + tb10x_mdsc0: tb10x-mdscr@ff300000 { compatible = "abilis,tb100-mdscr"; - reg = <0xFF300000 0x7000>; + reg = <0xff300000 0x7000>; tb100-mdscr-manage-tsin; }; - tb10x_mscr0: tb10x-mdscr@FF307000 { + tb10x_mscr0: tb10x-mdscr@ff307000 { compatible = "abilis,tb100-mdscr"; - reg = <0xFF307000 0x7000>; + reg = <0xff307000 0x7000>; }; tb10x_scr0: tb10x-mdscr@ff30e000 { compatible = "abilis,tb100-mdscr"; - reg = <0xFF30e000 0x4000>; + reg = <0xff30e000 0x4000>; tb100-mdscr-manage-tsin; }; tb10x_scr1: tb10x-mdscr@ff312000 { compatible = "abilis,tb100-mdscr"; - reg = <0xFF312000 0x4000>; + reg = <0xff312000 0x4000>; tb100-mdscr-manage-tsin; }; tb10x_wfb: tb10x-wfb@ff319000 { diff --git a/dts/src/arc/axc001.dtsi b/dts/src/arc/axc001.dtsi index fdc266504a..37be3bf03a 100644 --- a/dts/src/arc/axc001.dtsi +++ b/dts/src/arc/axc001.dtsi @@ -41,7 +41,7 @@ * this GPIO block ORs all interrupts on CPU card (creg,..) * to uplink only 1 IRQ to ARC core intc */ - dw-apb-gpio@0x2000 { + dw-apb-gpio@2000 { compatible = "snps,dw-apb-gpio"; reg = < 0x2000 0x80 >; #address-cells = <1>; @@ -60,7 +60,7 @@ }; }; - debug_uart: dw-apb-uart@0x5000 { + debug_uart: dw-apb-uart@5000 { compatible = "snps,dw-apb-uart"; reg = <0x5000 0x100>; clock-frequency = <33333000>; @@ -88,7 +88,7 @@ * avoid duplicating the MB dtsi file given that IRQ from * this intc to cpu intc are different for axs101 and axs103 */ - mb_intc: dw-apb-ictl@0xe0012000 { + mb_intc: dw-apb-ictl@e0012000 { #interrupt-cells = <1>; compatible = "snps,dw-apb-ictl"; reg = < 0x0 0xe0012000 0x0 0x200 >; diff --git a/dts/src/arc/axc003.dtsi b/dts/src/arc/axc003.dtsi index d75d65ddf8..effa37536d 100644 --- a/dts/src/arc/axc003.dtsi +++ b/dts/src/arc/axc003.dtsi @@ -55,7 +55,7 @@ * this GPIO block ORs all interrupts on CPU card (creg,..) * to uplink only 1 IRQ to ARC core intc */ - dw-apb-gpio@0x2000 { + dw-apb-gpio@2000 { compatible = "snps,dw-apb-gpio"; reg = < 0x2000 0x80 >; #address-cells = <1>; @@ -74,7 +74,7 @@ }; }; - debug_uart: dw-apb-uart@0x5000 { + debug_uart: dw-apb-uart@5000 { compatible = "snps,dw-apb-uart"; reg = <0x5000 0x100>; clock-frequency = <33333000>; @@ -102,19 +102,19 @@ * external DMA buffer located outside of IOC aperture. */ axs10x_mb { - ethernet@0x18000 { + ethernet@18000 { dma-coherent; }; - ehci@0x40000 { + ehci@40000 { dma-coherent; }; - ohci@0x60000 { + ohci@60000 { dma-coherent; }; - mmc@0x15000 { + mmc@15000 { dma-coherent; }; }; @@ -132,7 +132,7 @@ * avoid duplicating the MB dtsi file given that IRQ from * this intc to cpu intc are different for axs101 and axs103 */ - mb_intc: dw-apb-ictl@0xe0012000 { + mb_intc: dw-apb-ictl@e0012000 { #interrupt-cells = <1>; compatible = "snps,dw-apb-ictl"; reg = < 0x0 0xe0012000 0x0 0x200 >; @@ -153,7 +153,7 @@ #size-cells = <2>; ranges; /* - * Move frame buffer out of IOC aperture (0x8z-0xAz). + * Move frame buffer out of IOC aperture (0x8z-0xaz). */ frame_buffer: frame_buffer@be000000 { compatible = "shared-dma-pool"; diff --git a/dts/src/arc/axc003_idu.dtsi b/dts/src/arc/axc003_idu.dtsi index a05bb737ea..e401e59f61 100644 --- a/dts/src/arc/axc003_idu.dtsi +++ b/dts/src/arc/axc003_idu.dtsi @@ -62,7 +62,7 @@ * this GPIO block ORs all interrupts on CPU card (creg,..) * to uplink only 1 IRQ to ARC core intc */ - dw-apb-gpio@0x2000 { + dw-apb-gpio@2000 { compatible = "snps,dw-apb-gpio"; reg = < 0x2000 0x80 >; #address-cells = <1>; @@ -81,7 +81,7 @@ }; }; - debug_uart: dw-apb-uart@0x5000 { + debug_uart: dw-apb-uart@5000 { compatible = "snps,dw-apb-uart"; reg = <0x5000 0x100>; clock-frequency = <33333000>; @@ -109,19 +109,19 @@ * external DMA buffer located outside of IOC aperture. */ axs10x_mb { - ethernet@0x18000 { + ethernet@18000 { dma-coherent; }; - ehci@0x40000 { + ehci@40000 { dma-coherent; }; - ohci@0x60000 { + ohci@60000 { dma-coherent; }; - mmc@0x15000 { + mmc@15000 { dma-coherent; }; }; @@ -138,7 +138,7 @@ * avoid duplicating the MB dtsi file given that IRQ from * this intc to cpu intc are different for axs101 and axs103 */ - mb_intc: dw-apb-ictl@0xe0012000 { + mb_intc: dw-apb-ictl@e0012000 { #interrupt-cells = <1>; compatible = "snps,dw-apb-ictl"; reg = < 0x0 0xe0012000 0x0 0x200 >; @@ -159,7 +159,7 @@ #size-cells = <2>; ranges; /* - * Move frame buffer out of IOC aperture (0x8z-0xAz). + * Move frame buffer out of IOC aperture (0x8z-0xaz). */ frame_buffer: frame_buffer@be000000 { compatible = "shared-dma-pool"; diff --git a/dts/src/arc/axs10x_mb.dtsi b/dts/src/arc/axs10x_mb.dtsi index 37bafd44e3..4ead6dc9af 100644 --- a/dts/src/arc/axs10x_mb.dtsi +++ b/dts/src/arc/axs10x_mb.dtsi @@ -72,7 +72,7 @@ }; }; - gmac: ethernet@0x18000 { + gmac: ethernet@18000 { #interrupt-cells = <1>; compatible = "snps,dwmac"; reg = < 0x18000 0x2000 >; @@ -88,13 +88,13 @@ mac-address = [00 00 00 00 00 00]; /* Filled in by U-Boot */ }; - ehci@0x40000 { + ehci@40000 { compatible = "generic-ehci"; reg = < 0x40000 0x100 >; interrupts = < 8 >; }; - ohci@0x60000 { + ohci@60000 { compatible = "generic-ohci"; reg = < 0x60000 0x100 >; interrupts = < 8 >; @@ -118,7 +118,7 @@ * dw_mci_pltfm_prepare_command() is used in generic platform * code. */ - mmc@0x15000 { + mmc@15000 { compatible = "altr,socfpga-dw-mshc"; reg = < 0x15000 0x400 >; fifo-depth = < 16 >; @@ -129,7 +129,7 @@ bus-width = < 4 >; }; - uart@0x20000 { + uart@20000 { compatible = "snps,dw-apb-uart"; reg = <0x20000 0x100>; clock-frequency = <33333333>; @@ -139,7 +139,7 @@ reg-io-width = <4>; }; - uart@0x21000 { + uart@21000 { compatible = "snps,dw-apb-uart"; reg = <0x21000 0x100>; clock-frequency = <33333333>; @@ -150,7 +150,7 @@ }; /* UART muxed with USB data port (ttyS3) */ - uart@0x22000 { + uart@22000 { compatible = "snps,dw-apb-uart"; reg = <0x22000 0x100>; clock-frequency = <33333333>; @@ -160,7 +160,7 @@ reg-io-width = <4>; }; - i2c@0x1d000 { + i2c@1d000 { compatible = "snps,designware-i2c"; reg = <0x1d000 0x100>; clock-frequency = <400000>; @@ -177,7 +177,7 @@ #sound-dai-cells = <0>; }; - i2c@0x1f000 { + i2c@1f000 { compatible = "snps,designware-i2c"; #address-cells = <1>; #size-cells = <0>; @@ -218,13 +218,13 @@ }; }; - eeprom@0x54{ + eeprom@54{ compatible = "atmel,24c01"; reg = <0x54>; pagesize = <0x8>; }; - eeprom@0x57{ + eeprom@57{ compatible = "atmel,24c04"; reg = <0x57>; pagesize = <0x8>; diff --git a/dts/src/arc/hsdk.dts b/dts/src/arc/hsdk.dts index 43f17b51ee..69bc1c9e8e 100644 --- a/dts/src/arc/hsdk.dts +++ b/dts/src/arc/hsdk.dts @@ -110,12 +110,12 @@ cgu_rst: reset-controller@8a0 { compatible = "snps,hsdk-reset"; #reset-cells = <1>; - reg = <0x8A0 0x4>, <0xFF0 0x4>; + reg = <0x8a0 0x4>, <0xff0 0x4>; }; core_clk: core-clk@0 { compatible = "snps,hsdk-core-pll-clock"; - reg = <0x00 0x10>, <0x14B8 0x4>; + reg = <0x00 0x10>, <0x14b8 0x4>; #clock-cells = <0>; clocks = <&input_clk>; @@ -167,6 +167,18 @@ #clock-cells = <0>; }; + dmac_core_clk: dmac-core-clk { + compatible = "fixed-clock"; + clock-frequency = <400000000>; + #clock-cells = <0>; + }; + + dmac_cfg_clk: dmac-gpu-cfg-clk { + compatible = "fixed-clock"; + clock-frequency = <200000000>; + #clock-cells = <0>; + }; + gmac: ethernet@8000 { #interrupt-cells = <1>; compatible = "snps,dwmac"; @@ -200,6 +212,7 @@ compatible = "snps,hsdk-v1.0-ohci", "generic-ohci"; reg = <0x60000 0x100>; interrupts = <15>; + resets = <&cgu_rst HSDK_USB_RESET>; dma-coherent; }; @@ -207,6 +220,7 @@ compatible = "snps,hsdk-v1.0-ehci", "generic-ehci"; reg = <0x40000 0x100>; interrupts = <15>; + resets = <&cgu_rst HSDK_USB_RESET>; dma-coherent; }; @@ -237,6 +251,21 @@ reg = <0>; }; }; + + dmac: dmac@80000 { + compatible = "snps,axi-dma-1.01a"; + reg = <0x80000 0x400>; + interrupts = <27>; + clocks = <&dmac_core_clk>, <&dmac_cfg_clk>; + clock-names = "core-clk", "cfgr-clk"; + + dma-channels = <4>; + snps,dma-masters = <2>; + snps,data-width = <3>; + snps,block-size = <4096 4096 4096 4096>; + snps,priority = <0 1 2 3>; + snps,axi-max-burst-len = <16>; + }; }; memory@80000000 { diff --git a/dts/src/arc/vdk_axc003.dtsi b/dts/src/arc/vdk_axc003.dtsi index 0fd6ba985b..84e8766c8c 100644 --- a/dts/src/arc/vdk_axc003.dtsi +++ b/dts/src/arc/vdk_axc003.dtsi @@ -36,7 +36,7 @@ #interrupt-cells = <1>; }; - debug_uart: dw-apb-uart@0x5000 { + debug_uart: dw-apb-uart@5000 { compatible = "snps,dw-apb-uart"; reg = <0x5000 0x100>; clock-frequency = <2403200>; @@ -49,7 +49,7 @@ }; - mb_intc: dw-apb-ictl@0xe0012000 { + mb_intc: dw-apb-ictl@e0012000 { #interrupt-cells = <1>; compatible = "snps,dw-apb-ictl"; reg = < 0xe0012000 0x200 >; diff --git a/dts/src/arc/vdk_axc003_idu.dtsi b/dts/src/arc/vdk_axc003_idu.dtsi index 28956f9a9f..eb7e705e8a 100644 --- a/dts/src/arc/vdk_axc003_idu.dtsi +++ b/dts/src/arc/vdk_axc003_idu.dtsi @@ -44,7 +44,7 @@ #interrupt-cells = <1>; }; - debug_uart: dw-apb-uart@0x5000 { + debug_uart: dw-apb-uart@5000 { compatible = "snps,dw-apb-uart"; reg = <0x5000 0x100>; clock-frequency = <2403200>; @@ -57,7 +57,7 @@ }; - mb_intc: dw-apb-ictl@0xe0012000 { + mb_intc: dw-apb-ictl@e0012000 { #interrupt-cells = <1>; compatible = "snps,dw-apb-ictl"; reg = < 0xe0012000 0x200 >; diff --git a/dts/src/arc/vdk_axs10x_mb.dtsi b/dts/src/arc/vdk_axs10x_mb.dtsi index 48bb4b4cd2..925d5cc95d 100644 --- a/dts/src/arc/vdk_axs10x_mb.dtsi +++ b/dts/src/arc/vdk_axs10x_mb.dtsi @@ -36,7 +36,7 @@ }; }; - ethernet@0x18000 { + ethernet@18000 { #interrupt-cells = <1>; compatible = "snps,dwmac"; reg = < 0x18000 0x2000 >; @@ -49,13 +49,13 @@ clock-names = "stmmaceth"; }; - ehci@0x40000 { + ehci@40000 { compatible = "generic-ehci"; reg = < 0x40000 0x100 >; interrupts = < 8 >; }; - uart@0x20000 { + uart@20000 { compatible = "snps,dw-apb-uart"; reg = <0x20000 0x100>; clock-frequency = <2403200>; @@ -65,7 +65,7 @@ reg-io-width = <4>; }; - uart@0x21000 { + uart@21000 { compatible = "snps,dw-apb-uart"; reg = <0x21000 0x100>; clock-frequency = <2403200>; @@ -75,7 +75,7 @@ reg-io-width = <4>; }; - uart@0x22000 { + uart@22000 { compatible = "snps,dw-apb-uart"; reg = <0x22000 0x100>; clock-frequency = <2403200>; @@ -101,7 +101,7 @@ interrupt-names = "arc_ps2_irq"; }; - mmc@0x15000 { + mmc@15000 { compatible = "snps,dw-mshc"; reg = <0x15000 0x400>; fifo-depth = <1024>; @@ -117,11 +117,11 @@ * Embedded Vision subsystem UIO mappings; only relevant for EV VDK * * This node is intentionally put outside of MB above becase - * it maps areas outside of MB's 0xEz-0xFz. + * it maps areas outside of MB's 0xez-0xfz. */ - uio_ev: uio@0xD0000000 { + uio_ev: uio@d0000000 { compatible = "generic-uio"; - reg = <0xD0000000 0x2000 0xD1000000 0x2000 0x90000000 0x10000000 0xC0000000 0x10000000>; + reg = <0xd0000000 0x2000 0xd1000000 0x2000 0x90000000 0x10000000 0xc0000000 0x10000000>; reg-names = "ev_gsa", "ev_ctrl", "ev_shared_mem", "ev_code_mem"; interrupt-parent = <&mb_intc>; interrupts = <23>; diff --git a/dts/src/arm/alphascale-asm9260.dtsi b/dts/src/arm/alphascale-asm9260.dtsi index 907fc7bfc4..2ce6038536 100644 --- a/dts/src/arm/alphascale-asm9260.dtsi +++ b/dts/src/arm/alphascale-asm9260.dtsi @@ -4,10 +4,11 @@ * Licensed under the X11 license or the GPL v2 (or later) */ -#include "skeleton.dtsi" #include <dt-bindings/clock/alphascale,asm9260.h> / { + #address-cells = <1>; + #size-cells = <1>; interrupt-parent = <&icoll>; memory { diff --git a/dts/src/arm/alpine.dtsi b/dts/src/arm/alpine.dtsi index 731df7a8c4..d3036ea823 100644 --- a/dts/src/arm/alpine.dtsi +++ b/dts/src/arm/alpine.dtsi @@ -25,12 +25,18 @@ */ #include <dt-bindings/interrupt-controller/arm-gic.h> -#include "skeleton64.dtsi" / { + #address-cells = <2>; + #size-cells = <2>; /* SOC compatibility */ compatible = "al,alpine"; + memory { + device_type = "memory"; + reg = <0 0 0 0>; + }; + /* CPU Configuration */ cpus { #address-cells = <1>; diff --git a/dts/src/arm/am335x-baltos-ir2110.dts b/dts/src/arm/am335x-baltos-ir2110.dts index 75de1e7233..50dcf1290a 100644 --- a/dts/src/arm/am335x-baltos-ir2110.dts +++ b/dts/src/arm/am335x-baltos-ir2110.dts @@ -72,7 +72,3 @@ dual_emac_res_vlan = <2>; phy-handle = <&phy1>; }; - -&phy_sel { - rmii-clock-ext = <1>; -}; diff --git a/dts/src/arm/am335x-baltos-ir3220.dts b/dts/src/arm/am335x-baltos-ir3220.dts index 1b215c425c..f3f1abd264 100644 --- a/dts/src/arm/am335x-baltos-ir3220.dts +++ b/dts/src/arm/am335x-baltos-ir3220.dts @@ -114,7 +114,3 @@ dual_emac_res_vlan = <2>; phy-handle = <&phy1>; }; - -&phy_sel { - rmii-clock-ext = <1>; -}; diff --git a/dts/src/arm/am335x-baltos-ir5221.dts b/dts/src/arm/am335x-baltos-ir5221.dts index 832ead864d..42f473f0ed 100644 --- a/dts/src/arm/am335x-baltos-ir5221.dts +++ b/dts/src/arm/am335x-baltos-ir5221.dts @@ -133,10 +133,6 @@ phy-handle = <&phy1>; }; -&phy_sel { - rmii-clock-ext = <1>; -}; - &dcan1 { pinctrl-names = "default"; pinctrl-0 = <&dcan1_pins>; diff --git a/dts/src/arm/am335x-chiliboard.dts b/dts/src/arm/am335x-chiliboard.dts index 9c2a947aac..bffa5dce54 100644 --- a/dts/src/arm/am335x-chiliboard.dts +++ b/dts/src/arm/am335x-chiliboard.dts @@ -14,6 +14,10 @@ compatible = "grinn,am335x-chiliboard", "grinn,am335x-chilisom", "ti,am33xx"; + chosen { + stdout-path = &uart0; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -151,10 +155,6 @@ phy-mode = "rmii"; }; -&phy_sel { - rmii-clock-ext; -}; - /* USB */ &usb { status = "okay"; diff --git a/dts/src/arm/am335x-guardian.dts b/dts/src/arm/am335x-guardian.dts new file mode 100644 index 0000000000..c9611ea4b8 --- /dev/null +++ b/dts/src/arm/am335x-guardian.dts @@ -0,0 +1,511 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2018 Robert Bosch Power Tools GmbH + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + model = "Bosch AM335x Guardian"; + compatible = "bosch,am335x-guardian", "ti,am33xx"; + + chosen { + stdout-path = &uart0; + tick-timer = &timer2; + }; + + cpus { + cpu@0 { + cpu0-supply = <&dcdc2_reg>; + }; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x10000000>; /* 256 MB */ + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_pins>; + + button21 { + label = "guardian-power-button"; + linux,code = <KEY_POWER>; + gpios = <&gpio2 21 0>; + wakeup-source; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&leds_pins>; + + led1 { + label = "green:heartbeat"; + gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + + led2 { + label = "green:mmc0"; + gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc0"; + default-state = "off"; + }; + }; + + panel { + compatible = "ti,tilcdc,panel"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&lcd_pins_default &lcd_disen_pins>; + pinctrl-1 = <&lcd_pins_sleep>; + + display-timings { + 320x240 { + hactive = <320>; + vactive = <240>; + hback-porch = <68>; + hfront-porch = <20>; + hsync-len = <1>; + vback-porch = <18>; + vfront-porch = <4>; + vsync-len = <1>; + clock-frequency = <9000000>; + hsync-active = <0>; + vsync-active = <0>; + }; + }; + panel-info { + ac-bias = <255>; + ac-bias-intrpt = <0>; + dma-burst-sz = <16>; + bpp = <24>; + bus-width = <16>; + fdd = <0x80>; + sync-edge = <0>; + sync-ctrl = <1>; + raster-order = <0>; + fifo-th = <0>; + }; + + }; + + pwm7: dmtimer-pwm { + compatible = "ti,omap-dmtimer-pwm"; + ti,timers = <&timer7>; + pinctrl-names = "default"; + pinctrl-0 = <&dmtimer7_pins>; + }; + + vmmcsd_fixed: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "vmmcsd_fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&cppi41dma { + status = "okay"; +}; + +&elm { + status = "okay"; +}; + +&gpmc { + pinctrl-names = "default"; + pinctrl-0 = <&nandflash_pins>; + ranges = <0 0 0x08000000 0x1000000>; /* CS0: 16MB for NAND */ + status = "okay"; + + nand@0,0 { + compatible = "ti,omap2-nand"; + reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ + rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */ + ti,nand-ecc-opt = "bch16"; + ti,elm-id = <&elm>; + nand-bus-width = <8>; + gpmc,device-width = <1>; + gpmc,sync-clk-ps = <0>; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <44>; + gpmc,cs-wr-off-ns = <44>; + gpmc,adv-on-ns = <6>; + gpmc,adv-rd-off-ns = <34>; + gpmc,adv-wr-off-ns = <44>; + gpmc,we-on-ns = <0>; + gpmc,we-off-ns = <40>; + gpmc,oe-on-ns = <0>; + gpmc,oe-off-ns = <54>; + gpmc,access-ns = <64>; + gpmc,rd-cycle-ns = <82>; + gpmc,wr-cycle-ns = <82>; + gpmc,bus-turnaround-ns = <0>; + gpmc,cycle2cycle-delay-ns = <0>; + gpmc,clk-activation-ns = <0>; + gpmc,wr-access-ns = <40>; + gpmc,wr-data-mux-bus-ns = <0>; + + /* + * MTD partition table + * + * All SPL-* partitions are sized to minimal length which can + * be independently programmable. For NAND flash this is equal + * to size of erase-block. + */ + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "SPL"; + reg = <0x0 0x40000>; + }; + + partition@1 { + label = "SPL.backup1"; + reg = <0x40000 0x40000>; + }; + + partition@2 { + label = "SPL.backup2"; + reg = <0x80000 0x40000>; + }; + + partition@3 { + label = "SPL.backup3"; + reg = <0xc0000 0x40000>; + }; + + partition@4 { + label = "u-boot"; + reg = <0x100000 0x100000>; + }; + + partition@5 { + label = "u-boot.backup1"; + reg = <0x200000 0x100000>; + }; + + partition@6 { + label = "u-boot-env"; + reg = <0x300000 0x40000>; + }; + + partition@7 { + label = "u-boot-env.backup1"; + reg = <0x340000 0x40000>; + }; + + partition@8 { + label = "UBI"; + reg = <0x380000 0x1fc80000>; + }; + }; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + clock-frequency = <400000>; + status = "okay"; + + tps: tps@24 { + reg = <0x24>; + }; +}; + +&lcdc { + blue-and-red-wiring = "crossed"; + status = "okay"; +}; + +&mmc1 { + bus-width = <0x4>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; + vmmc-supply = <&vmmcsd_fixed>; + status = "okay"; +}; + +&rtc { + clocks = <&clk_32768_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>; + clock-names = "ext-clk", "int-clk"; + system-power-controller; +}; + +&spi0 { + ti,pindir-d0-out-d1-in; + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins>; + status = "okay"; +}; + +#include "tps65217.dtsi" + +&tps { + ti,pmic-shutdown-controller; + interrupt-parent = <&intc>; + interrupts = <7>; /* NMI */ + + backlight { + isel = <1>; /* 1 - ISET1, 2 ISET2 */ + fdim = <100>; /* TPS65217_BL_FDIM_100HZ */ + default-brightness = <100>; + }; + + regulators { + dcdc1_reg: regulator@0 { + regulator-name = "vdds_dpr"; + regulator-always-on; + }; + + dcdc2_reg: regulator@1 { + regulator-name = "vdd_mpu"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <1351500>; + regulator-boot-on; + regulator-always-on; + }; + + dcdc3_reg: regulator@2 { + regulator-name = "vdd_core"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <1150000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1_reg: regulator@3 { + regulator-name = "vio,vrtc,vdds"; + regulator-always-on; + }; + + ldo2_reg: regulator@4 { + regulator-name = "vdd_3v3aux"; + regulator-always-on; + }; + + ldo3_reg: regulator@5 { + regulator-name = "vdd_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo4_reg: regulator@6 { + regulator-name = "vdd_3v3a"; + regulator-always-on; + }; + }; +}; + +&tscadc { + status = "okay"; + + adc { + ti,adc-channels = <0 1 2 3 4 5 6>; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + status = "okay"; +}; + +&usb { + status = "okay"; +}; + +&usb_ctrl_mod { + status = "okay"; +}; + +&usb0 { + dr_mode = "peripheral"; + status = "okay"; +}; + +&usb0_phy { + status = "okay"; +}; + +&usb1 { + dr_mode = "host"; + status = "okay"; +}; + +&usb1_phy { + status = "okay"; +}; + +&am33xx_pinmux { + pinctrl-names = "default"; + pinctrl-0 = <&clkout2_pin &gpio_pins>; + + clkout2_pin: pinmux_clkout2_pin { + pinctrl-single,pins = < + AM33XX_IOPAD(0x9b4, PIN_OUTPUT_PULLDOWN | MUX_MODE3) + >; + }; + + dmtimer7_pins: pinmux_dmtimer7_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x968, PIN_OUTPUT | MUX_MODE5) + >; + }; + + gpio_keys_pins: pinmux_gpio_keys_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x940, PIN_INPUT | MUX_MODE7) + >; + }; + + gpio_pins: pinmux_gpio_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x928, PIN_OUTPUT | MUX_MODE7) + AM33XX_IOPAD(0x990, PIN_OUTPUT | MUX_MODE7) + >; + }; + + i2c0_pins: pinmux_i2c0_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) + AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) + >; + }; + + lcd_disen_pins: pinmux_lcd_disen_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x9a4, PIN_OUTPUT_PULLUP | SLEWCTRL_SLOW | MUX_MODE7) + >; + }; + + lcd_pins_default: pinmux_lcd_pins_default { + pinctrl-single,pins = < + AM33XX_IOPAD(0x820, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1) + AM33XX_IOPAD(0x824, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1) + AM33XX_IOPAD(0x828, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1) + AM33XX_IOPAD(0x82c, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1) + AM33XX_IOPAD(0x830, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1) + AM33XX_IOPAD(0x834, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1) + AM33XX_IOPAD(0x838, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1) + AM33XX_IOPAD(0x83c, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1) + AM33XX_IOPAD(0x8a0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + AM33XX_IOPAD(0x8a4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + AM33XX_IOPAD(0x8a8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + AM33XX_IOPAD(0x8ac, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + AM33XX_IOPAD(0x8b0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + AM33XX_IOPAD(0x8b4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + AM33XX_IOPAD(0x8b8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + AM33XX_IOPAD(0x8bc, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + AM33XX_IOPAD(0x8c0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + AM33XX_IOPAD(0x8c4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + AM33XX_IOPAD(0x8c8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + AM33XX_IOPAD(0x8cc, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + AM33XX_IOPAD(0x8d0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + AM33XX_IOPAD(0x8d4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + AM33XX_IOPAD(0x8d8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + AM33XX_IOPAD(0x8dc, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + AM33XX_IOPAD(0x8e0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + AM33XX_IOPAD(0x8e4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + AM33XX_IOPAD(0x8e8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + AM33XX_IOPAD(0x8ec, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + >; + }; + + lcd_pins_sleep: pinmux_lcd_pins_sleep { + pinctrl-single,pins = < + AM33XX_IOPAD(0x8a0, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + AM33XX_IOPAD(0x8a4, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + AM33XX_IOPAD(0x8a8, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + AM33XX_IOPAD(0x8ac, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + AM33XX_IOPAD(0x8b0, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + AM33XX_IOPAD(0x8b4, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + AM33XX_IOPAD(0x8b8, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + AM33XX_IOPAD(0x8bc, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + AM33XX_IOPAD(0x8c0, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + AM33XX_IOPAD(0x8c4, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + AM33XX_IOPAD(0x8c8, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + AM33XX_IOPAD(0x8cc, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + AM33XX_IOPAD(0x8d0, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + AM33XX_IOPAD(0x8d4, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + AM33XX_IOPAD(0x8d8, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + AM33XX_IOPAD(0x8dc, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + AM33XX_IOPAD(0x8e0, PIN_INPUT_PULLDOWN | SLEWCTRL_SLOW | MUX_MODE7) + AM33XX_IOPAD(0x8e4, PIN_INPUT_PULLDOWN | SLEWCTRL_SLOW | MUX_MODE7) + AM33XX_IOPAD(0x8e8, PIN_INPUT_PULLDOWN | SLEWCTRL_SLOW | MUX_MODE7) + AM33XX_IOPAD(0x8ec, PIN_INPUT_PULLDOWN | SLEWCTRL_SLOW | MUX_MODE7) + >; + }; + + leds_pins: pinmux_leds_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x868, PIN_OUTPUT | MUX_MODE7) + AM33XX_IOPAD(0x86c, PIN_OUTPUT | MUX_MODE7) + >; + }; + + mmc1_pins: pinmux_mmc1_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) + AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) + AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) + AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) + AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) + AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) + AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) + >; + }; + + spi0_pins: pinmux_spi0_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x950, PIN_OUTPUT_PULLDOWN | MUX_MODE0) + AM33XX_IOPAD(0x954, PIN_OUTPUT_PULLUP | MUX_MODE0) + AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE0) + AM33XX_IOPAD(0x95c, PIN_OUTPUT_PULLUP | MUX_MODE0) + >; + }; + + uart0_pins: pinmux_uart0_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) + AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) + >; + }; + + nandflash_pins: pinmux_nandflash_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x800, PIN_INPUT | MUX_MODE0) + AM33XX_IOPAD(0x804, PIN_INPUT | MUX_MODE0) + AM33XX_IOPAD(0x808, PIN_INPUT | MUX_MODE0) + AM33XX_IOPAD(0x80c, PIN_INPUT | MUX_MODE0) + AM33XX_IOPAD(0x810, PIN_INPUT | MUX_MODE0) + AM33XX_IOPAD(0x814, PIN_INPUT | MUX_MODE0) + AM33XX_IOPAD(0x818, PIN_INPUT | MUX_MODE0) + AM33XX_IOPAD(0x81c, PIN_INPUT | MUX_MODE0) + AM33XX_IOPAD(0x870, PIN_INPUT | MUX_MODE0) + AM33XX_IOPAD(0x874, PIN_OUTPUT | MUX_MODE0) + AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0) + AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0) + AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0) + AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0) + AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0) + >; + }; +}; diff --git a/dts/src/arm/am335x-icev2.dts b/dts/src/arm/am335x-icev2.dts index f2005ecca7..9ac775c710 100644 --- a/dts/src/arm/am335x-icev2.dts +++ b/dts/src/arm/am335x-icev2.dts @@ -484,10 +484,6 @@ dual_emac; }; -&phy_sel { - rmii-clock-ext; -}; - &davinci_mdio { pinctrl-names = "default", "sleep"; pinctrl-0 = <&davinci_mdio_default>; diff --git a/dts/src/arm/am335x-igep0033.dtsi b/dts/src/arm/am335x-igep0033.dtsi index 55b4c94cfa..cbd22f25de 100644 --- a/dts/src/arm/am335x-igep0033.dtsi +++ b/dts/src/arm/am335x-igep0033.dtsi @@ -123,10 +123,6 @@ phy-mode = "rmii"; }; -&phy_sel { - rmii-clock-ext; -}; - &elm { status = "okay"; }; diff --git a/dts/src/arm/am335x-lxm.dts b/dts/src/arm/am335x-lxm.dts index 481edcfaf1..d0e8e720a4 100644 --- a/dts/src/arm/am335x-lxm.dts +++ b/dts/src/arm/am335x-lxm.dts @@ -328,10 +328,6 @@ dual_emac_res_vlan = <3>; }; -&phy_sel { - rmii-clock-ext; -}; - &mac { pinctrl-names = "default", "sleep"; pinctrl-0 = <&cpsw_default>; diff --git a/dts/src/arm/am335x-moxa-uc-2100-common.dtsi b/dts/src/arm/am335x-moxa-uc-2100-common.dtsi index 14f7819534..cb5913a698 100644 --- a/dts/src/arm/am335x-moxa-uc-2100-common.dtsi +++ b/dts/src/arm/am335x-moxa-uc-2100-common.dtsi @@ -159,11 +159,6 @@ status = "okay"; }; -&phy_sel { - reg= <0x44e10650 0xf5>; - rmii-clock-ext; -}; - &sham { status = "okay"; }; diff --git a/dts/src/arm/am335x-moxa-uc-8100-me-t.dts b/dts/src/arm/am335x-moxa-uc-8100-me-t.dts index 5a58efc0c8..e562ce40f2 100644 --- a/dts/src/arm/am335x-moxa-uc-8100-me-t.dts +++ b/dts/src/arm/am335x-moxa-uc-8100-me-t.dts @@ -446,11 +446,6 @@ dual_emac_res_vlan = <2>; }; -&phy_sel { - reg= <0x44e10650 0xf5>; - rmii-clock-ext; -}; - &sham { status = "okay"; }; diff --git a/dts/src/arm/am335x-phycore-som.dtsi b/dts/src/arm/am335x-phycore-som.dtsi index 428a25e952..015adb626b 100644 --- a/dts/src/arm/am335x-phycore-som.dtsi +++ b/dts/src/arm/am335x-phycore-som.dtsi @@ -100,10 +100,6 @@ status = "okay"; }; -&phy_sel { - rmii-clock-ext; -}; - /* I2C Busses */ &am33xx_pinmux { i2c0_pins: pinmux_i2c0 { diff --git a/dts/src/arm/am335x-shc.dts b/dts/src/arm/am335x-shc.dts index 5b250060f6..bfbe27a800 100644 --- a/dts/src/arm/am335x-shc.dts +++ b/dts/src/arm/am335x-shc.dts @@ -1,11 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * support for the bosch am335x based shc c3 board * * Copyright, C) 2015 Heiko Schocher <hs@denx.de> * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /dts-v1/; diff --git a/dts/src/arm/am33xx-l4.dtsi b/dts/src/arm/am33xx-l4.dtsi index 7b818d9d2e..f459ec316a 100644 --- a/dts/src/arm/am33xx-l4.dtsi +++ b/dts/src/arm/am33xx-l4.dtsi @@ -279,17 +279,9 @@ #pinctrl-cells = <1>; ranges = <0 0 0x2000>; - phy_sel: cpsw-phy-sel@650 { - compatible = "ti,am3352-cpsw-phy-sel"; - reg= <0x650 0x4>; - reg-names = "gmii-sel"; - }; - am33xx_pinmux: pinmux@800 { compatible = "pinctrl-single"; reg = <0x800 0x238>; - #address-cells = <1>; - #size-cells = <0>; #pinctrl-cells = <1>; pinctrl-single,register-width = <32>; pinctrl-single,function-mask = <0x7f>; @@ -302,6 +294,12 @@ #size-cells = <1>; ranges = <0 0 0x800>; + phy_gmii_sel: phy-gmii-sel { + compatible = "ti,am3352-phy-gmii-sel"; + reg = <0x650 0x4>; + #phy-cells = <2>; + }; + scm_clocks: clocks { #address-cells = <1>; #size-cells = <0>; @@ -717,7 +715,6 @@ interrupts = <40 41 42 43>; ranges = <0 0 0x8000>; syscon = <&scm_conf>; - cpsw-phy-sel = <&phy_sel>; status = "disabled"; davinci_mdio: mdio@1000 { @@ -733,11 +730,13 @@ cpsw_emac0: slave@200 { /* Filled in by U-Boot */ mac-address = [ 00 00 00 00 00 00 ]; + phys = <&phy_gmii_sel 1 1>; }; cpsw_emac1: slave@300 { /* Filled in by U-Boot */ mac-address = [ 00 00 00 00 00 00 ]; + phys = <&phy_gmii_sel 2 1>; }; }; }; diff --git a/dts/src/arm/am3874-iceboard.dts b/dts/src/arm/am3874-iceboard.dts new file mode 100644 index 0000000000..883fb85135 --- /dev/null +++ b/dts/src/arm/am3874-iceboard.dts @@ -0,0 +1,496 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device tree for Winterland IceBoard + * + * http://mcgillcosmology.com + * http://threespeedlogic.com + * + * This is an ARM + FPGA instrumentation board used at telescopes in + * Antarctica (the South Pole Telescope), Chile (POLARBEAR), and at the DRAO + * observatory in British Columbia (CHIME). + * + * Copyright (c) 2019 Three-Speed Logic, Inc. <gsmecher@threespeedlogic.com> + */ + +/dts-v1/; + +#include "dm814x.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + model = "Winterland IceBoard"; + compatible = "ti,dm8148", "ti,dm814"; + + chosen { + stdout-path = "serial1:115200n8"; + bootargs = "earlycon"; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x40000000>; /* 1 GB */ + }; + + vmmcsd_fixed: fixedregulator0 { + compatible = "regulator-fixed"; + regulator-name = "vmmcsd_fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; +}; + +/* The MAC provides internal delay for the transmit path ONLY, which is enabled + * provided no -id/-txid/-rxid suffix is provided to "phy-mode". + * + * The receive path is delayed at the PHY. The recommended register settings + * are 0xf0 for the control bits, and 0x7777 for the data bits. However, the + * conversion code in the kernel lies: the PHY's registers are 120 ps per tap, + * and the kernel assumes 200 ps per tap. So we have fudged the numbers here to + * obtain the correct register settings. + */ +&mac { dual_emac = <1>; }; +&cpsw_emac0 { + phy-handle = <ðphy0>; + phy-mode = "rgmii"; + dual_emac_res_vlan = <1>; +}; +&cpsw_emac1 { + phy-handle = <ðphy1>; + phy-mode = "rgmii"; + dual_emac_res_vlan = <2>; +}; + +&davinci_mdio { + ethphy0: ethernet-phy@0 { + reg = <0x2>; + + rxc-skew-ps = <3000>; + rxdv-skew-ps = <0>; + + rxd3-skew-ps = <0>; + rxd2-skew-ps = <0>; + rxd1-skew-ps = <0>; + rxd0-skew-ps = <0>; + + phy-reset-gpios = <&gpio2 8 GPIO_ACTIVE_LOW>; + }; + + ethphy1: ethernet-phy@1 { + reg = <0x1>; + + rxc-skew-ps = <3000>; + rxdv-skew-ps = <0>; + + rxd3-skew-ps = <0>; + rxd2-skew-ps = <0>; + rxd1-skew-ps = <0>; + rxd0-skew-ps = <0>; + + phy-reset-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; + }; +}; + +&mmc1 { status = "disabled"; }; +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins>; + vmmc-supply = <&vmmcsd_fixed>; + bus-width = <4>; +}; +&mmc3 { status = "disabled"; }; + +&i2c1 { + /* Most I2C activity happens through this port, with the sole exception + * of the backplane. Since there are multiply assigned addresses, the + * "i2c-mux-idle-disconnect" is important. + */ + + pca9548@70 { + compatible = "nxp,pca9548"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + + i2c@0 { + /* FMC A */ + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + i2c-mux-idle-disconnect; + }; + + i2c@1 { + /* FMC B */ + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + i2c-mux-idle-disconnect; + }; + + i2c@2 { + /* QSFP A */ + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + i2c-mux-idle-disconnect; + }; + + i2c@3 { + /* QSFP B */ + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + i2c-mux-idle-disconnect; + }; + + i2c@4 { + /* SFP */ + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + i2c-mux-idle-disconnect; + }; + + i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + i2c-mux-idle-disconnect; + + ina230@40 { compatible = "ti,ina230"; reg = <0x40>; shunt-resistor = <5000>; }; + ina230@41 { compatible = "ti,ina230"; reg = <0x41>; shunt-resistor = <5000>; }; + ina230@42 { compatible = "ti,ina230"; reg = <0x42>; shunt-resistor = <5000>; }; + + ina230@44 { compatible = "ti,ina230"; reg = <0x44>; shunt-resistor = <5000>; }; + ina230@45 { compatible = "ti,ina230"; reg = <0x45>; shunt-resistor = <5000>; }; + ina230@46 { compatible = "ti,ina230"; reg = <0x46>; shunt-resistor = <5000>; }; + + ina230@47 { compatible = "ti,ina230"; reg = <0x47>; shunt-resistor = <5500>; }; + ina230@48 { compatible = "ti,ina230"; reg = <0x48>; shunt-resistor = <2360>; }; + ina230@49 { compatible = "ti,ina230"; reg = <0x49>; shunt-resistor = <2360>; }; + ina230@43 { compatible = "ti,ina230"; reg = <0x43>; shunt-resistor = <2360>; }; + ina230@4b { compatible = "ti,ina230"; reg = <0x4b>; shunt-resistor = <5500>; }; + ina230@4c { compatible = "ti,ina230"; reg = <0x4c>; shunt-resistor = <2360>; }; + ina230@4d { compatible = "ti,ina230"; reg = <0x4d>; shunt-resistor = <770>; }; + ina230@4e { compatible = "ti,ina230"; reg = <0x4e>; shunt-resistor = <770>; }; + ina230@4f { compatible = "ti,ina230"; reg = <0x4f>; shunt-resistor = <770>; }; + }; + + i2c@6 { + /* Backplane */ + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + i2c-mux-idle-disconnect; + }; + + i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + i2c-mux-idle-disconnect; + + u41: pca9575@20 { + compatible = "nxp,pca9575"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "FMCA_EN_12V0", "FMCA_EN_3V3", "FMCA_EN_VADJ", "FMCA_PG_M2C", + "FMCA_PG_C2M", "FMCA_PRSNT_M2C_L", "FMCA_CLK_DIR", "SFP_LOS", + "FMCB_EN_12V0", "FMCB_EN_3V3", "FMCB_EN_VADJ", "FMCB_PG_M2C", + "FMCB_PG_C2M", "FMCB_PRSNT_M2C_L", "FMCB_CLK_DIR", "SFP_ModPrsL"; + reset_gpios = <&gpio2 11 GPIO_ACTIVE_LOW>; + }; + + u42: pca9575@21 { + compatible = "nxp,pca9575"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = + "QSFPA_ModPrsL", "QSFPA_IntL", "QSFPA_ResetL", "QSFPA_ModSelL", + "QSFPA_LPMode", "QSFPB_ModPrsL", "QSFPB_IntL", "QSFPB_ResetL", + "SFP_TxFault", "SFP_TxDisable", "SFP_RS0", "SFP_RS1", + "QSFPB_ModSelL", "QSFPB_LPMode", "SEL_SFP", "ARM_MR"; + reset_gpios = <&gpio2 11 GPIO_ACTIVE_LOW>; + }; + + u48: pca9575@22 { + compatible = "nxp,pca9575"; + reg=<0x22>; + gpio-controller; + #gpio-cells = <2>; + + sw-gpios = <&u48 0 0>, <&u48 1 0>, <&u48 2 0>, <&u48 3 0>, + <&u48 4 0>, <&u48 5 0>, <&u48 6 0>, <&u48 7 0>; + led-gpios = <&u48 7 0>, <&u48 6 0>, <&u48 5 0>, <&u48 4 0>, + <&u48 3 0>, <&u48 2 0>, <&u48 1 0>, <&u48 0 0>; + + gpio-line-names = + "GP_SW1", "GP_SW2", "GP_SW3", "GP_SW4", + "GP_SW5", "GP_SW6", "GP_SW7", "GP_SW8", + "GP_LED8", "GP_LED7", "GP_LED6", "GP_LED5", + "GP_LED4", "GP_LED3", "GP_LED2", "GP_LED1"; + reset_gpios = <&gpio2 11 GPIO_ACTIVE_LOW>; + }; + + u59: pca9575@23 { + compatible = "nxp,pca9575"; + reg=<0x23>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = + "GP_LED9", "GP_LED10", "GP_LED11", "GP_LED12", + "GTX1V8PowerFault", "PHYAPowerFault", "PHYBPowerFault", "ArmPowerFault", + "BP_SLOW_GPIO0", "BP_SLOW_GPIO1", "BP_SLOW_GPIO2", "BP_SLOW_GPIO3", + "BP_SLOW_GPIO4", "BP_SLOW_GPIO5", "__unused_u59_p16", "__unused_u59_p17"; + reset_gpios = <&gpio2 11 GPIO_ACTIVE_LOW>; + }; + + tmp100@48 { compatible = "ti,tmp100"; reg = <0x48>; }; + tmp100@4a { compatible = "ti,tmp100"; reg = <0x4a>; }; + tmp100@4b { compatible = "ti,tmp100"; reg = <0x4b>; }; + tmp100@4c { compatible = "ti,tmp100"; reg = <0x4c>; }; + + /* EEPROM bank and serial number are treated as separate devices */ + at24c01@57 { compatible = "atmel,24c01"; reg = <0x57>; }; + at24cs01@5f { compatible = "atmel,24cs01"; reg = <0x5f>; }; + }; + }; +}; + +&i2c2 { + pca9548@71 { + compatible = "nxp,pca9548"; + reg = <0x71>; + #address-cells = <1>; + #size-cells = <0>; + + i2c@6 { + /* Backplane */ + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + multi-master; + + /* All backplanes should have this -- it's how we know they're there. */ + at24c08@54 { compatible="atmel,24c08"; reg=<0x54>; }; + at24cs08@5c { compatible="atmel,24cs08"; reg=<0x5c>; }; + + /* 16 slot backplane */ + tmp421@4d { compatible="ti,tmp421"; reg=<0x4d>; }; + tmp421@4e { compatible="ti,tmp421"; reg=<0x4e>; }; + ina230@40 { compatible = "ti,ina230"; reg = <0x40>; shunt-resistor = <2360>; }; + amc6821@18 { compatible = "ti,amc6821"; reg = <0x18>; }; + + /* Single slot backplane */ + }; + }; +}; + +&pincntl { + mmc2_pins: pinmux_mmc2_pins { + pinctrl-single,pins = < + DM814X_IOPAD(0x0800, PIN_INPUT | 0x1) /* SD1_CLK */ + DM814X_IOPAD(0x0804, PIN_INPUT_PULLUP | 0x1) /* SD1_CMD */ + DM814X_IOPAD(0x0808, PIN_INPUT_PULLUP | 0x1) /* SD1_DAT[0] */ + DM814X_IOPAD(0x080c, PIN_INPUT_PULLUP | 0x1) /* SD1_DAT[1] */ + DM814X_IOPAD(0x0810, PIN_INPUT_PULLUP | 0x1) /* SD1_DAT[2] */ + DM814X_IOPAD(0x0814, PIN_INPUT_PULLUP | 0x1) /* SD1_DAT[3] */ + DM814X_IOPAD(0x0924, PIN_INPUT_PULLUP | 0x40) /* SD1_POW */ + DM814X_IOPAD(0x0928, PIN_INPUT | 0x40) /* SD1_SDWP */ + DM814X_IOPAD(0x093C, PIN_INPUT | 0x2) /* SD1_SDCD */ + >; + }; + + usb0_pins: pinmux_usb0_pins { + pinctrl-single,pins = < + DM814X_IOPAD(0x0c34, PIN_OUTPUT | 0x1) /* USB0_DRVVBUS */ + >; + }; + + usb1_pins: pinmux_usb1_pins { + pinctrl-single,pins = < + DM814X_IOPAD(0x0834, PIN_OUTPUT | 0x80) /* USB1_DRVVBUS */ + >; + }; + + gpio1_pins: pinmux_gpio1_pins { + pinctrl-single,pins = < + DM814X_IOPAD(0x081c, PIN_OUTPUT | 0x80) /* PROGRAM_B */ + DM814X_IOPAD(0x0820, PIN_INPUT | 0x80) /* INIT_B */ + DM814X_IOPAD(0x0824, PIN_INPUT | 0x80) /* DONE */ + + DM814X_IOPAD(0x0838, PIN_INPUT_PULLUP | 0x80) /* FMCA_TMS */ + DM814X_IOPAD(0x083c, PIN_INPUT_PULLUP | 0x80) /* FMCA_TCK */ + DM814X_IOPAD(0x0898, PIN_INPUT_PULLUP | 0x80) /* FMCA_TDO */ + DM814X_IOPAD(0x089c, PIN_INPUT_PULLUP | 0x80) /* FMCA_TDI */ + DM814X_IOPAD(0x08ac, PIN_INPUT_PULLUP | 0x80) /* FMCA_TRST */ + + DM814X_IOPAD(0x08b0, PIN_INPUT_PULLUP | 0x80) /* FMCB_TMS */ + DM814X_IOPAD(0x0a88, PIN_INPUT_PULLUP | 0x80) /* FMCB_TCK */ + DM814X_IOPAD(0x0a8c, PIN_INPUT_PULLUP | 0x80) /* FMCB_TDO */ + DM814X_IOPAD(0x08bc, PIN_INPUT_PULLUP | 0x80) /* FMCB_TDI */ + DM814X_IOPAD(0x0a94, PIN_INPUT_PULLUP | 0x80) /* FMCB_TRST */ + + DM814X_IOPAD(0x08d4, PIN_INPUT_PULLUP | 0x80) /* FPGA_TMS */ + DM814X_IOPAD(0x0aa8, PIN_INPUT_PULLUP | 0x80) /* FPGA_TCK */ + DM814X_IOPAD(0x0adc, PIN_INPUT_PULLUP | 0x80) /* FPGA_TDO */ + DM814X_IOPAD(0x0ab0, PIN_INPUT_PULLUP | 0x80) /* FPGA_TDI */ + >; + }; + + gpio2_pins: pinmux_gpio2_pins { + pinctrl-single,pins = < + DM814X_IOPAD(0x090c, PIN_INPUT_PULLUP | 0x80) /* PHY A IRQ */ + DM814X_IOPAD(0x0910, PIN_INPUT_PULLUP | 0x80) /* PHY A RESET */ + DM814X_IOPAD(0x08f4, PIN_INPUT_PULLUP | 0x80) /* PHY B IRQ */ + DM814X_IOPAD(0x08f8, PIN_INPUT_PULLUP | 0x80) /* PHY B RESET */ + + //DM814X_IOPAD(0x0a14, PIN_INPUT_PULLUP | 0x80) /* ARM IRQ */ + //DM814X_IOPAD(0x0900, PIN_INPUT | 0x80) /* GPIO IRQ */ + DM814X_IOPAD(0x0a2c, PIN_INPUT_PULLUP | 0x80) /* GPIO RESET */ + >; + }; + + gpio4_pins: pinmux_gpio4_pins { + pinctrl-single,pins = < + /* The PLL doesn't react well to the SPI controller reset, so + * we force the CS lines to pull up as GPIOs until we're ready. + * See https://e2e.ti.com/support/processors/f/791/t/276011?Linux-support-for-AM3874-DM8148-in-Arago-linux-omap3 + */ + DM814X_IOPAD(0x0b3c, PIN_INPUT_PULLUP | 0x80) /* BP_ARM_GPIO0 */ + DM814X_IOPAD(0x0b40, PIN_INPUT_PULLUP | 0x80) /* BP_ARM_GPIO1 */ + DM814X_IOPAD(0x0b44, PIN_INPUT_PULLUP | 0x80) /* BP_ARM_GPIO2 */ + DM814X_IOPAD(0x0b48, PIN_INPUT_PULLUP | 0x80) /* BP_ARM_GPIO3 */ + DM814X_IOPAD(0x0b4c, PIN_INPUT_PULLUP | 0x80) /* BP_ARM_GPIO4 */ + DM814X_IOPAD(0x0b50, PIN_INPUT_PULLUP | 0x80) /* BP_ARM_GPIO5 */ + >; + }; + + spi2_pins: pinmux_spi2_pins { + pinctrl-single,pins = < + DM814X_IOPAD(0x0950, PIN_INPUT_PULLUP | 0x80) /* PLL SPI CS1 as GPIO */ + DM814X_IOPAD(0x0818, PIN_INPUT_PULLUP | 0x80) /* PLL SPI CS2 as GPIO */ + >; + }; + + spi4_pins: pinmux_spi4_pins { + pinctrl-single,pins = < + DM814X_IOPAD(0x0a7c, 0x20) + DM814X_IOPAD(0x0b74, 0x20) + DM814X_IOPAD(0x0b78, PIN_OUTPUT | 0x20) + DM814X_IOPAD(0x0b7c, PIN_OUTPUT_PULLDOWN | 0x20) + DM814X_IOPAD(0x0b80, PIN_INPUT | 0x20) + >; + }; +}; + +&gpio1 { + pinctrl-names = "default"; + pinctrl-0 = <&gpio1_pins>; + gpio-line-names = + "", "PROGRAM_B", "INIT_B", "DONE", /* 0-3 */ + "", "", "", "", /* 4-7 */ + "FMCA_TMS", "FMCA_TCK", "FMCA_TDO", "FMCA_TDI", /* 8-11 */ + "", "", "", "FMCA_TRST", /* 12-15 */ + "FMCB_TMS", "FMCB_TCK", "FMCB_TDO", "FMCB_TDI", /* 16-19 */ + "FMCB_TRST", "", "", "", /* 20-23 */ + "FPGA_TMS", "FPGA_TCK", "FPGA_TDO", "FPGA_TDI", /* 24-27 */ + "", "", "", ""; /* 28-31 */ +}; + +&gpio2 { + pinctrl-names = "default"; + pinctrl-0 = <&gpio2_pins>; + gpio-line-names = + "PHYA_IRQ_N", "PHYA_RESET_N", "", "", /* 0-3 */ + "", "", "", "PHYB_IRQ_N", /* 4-7 */ + "PHYB_RESET_N", "ARM_IRQ", "GPIO_IRQ", ""; /* 8-11 */ +}; + +&gpio3 { + pinctrl-names = "default"; + /*pinctrl-0 = <&gpio3_pins>;*/ + gpio-line-names = + "", "", "ARMClkSel0", "", /* 0-3 */ + "EnFPGARef", "", "", "ARMClkSel1"; /* 4-7 */ +}; + +&gpio4 { + pinctrl-names = "default"; + pinctrl-0 = <&gpio4_pins>; + gpio-line-names = + "BP_ARM_GPIO0", "BP_ARM_GPIO1", "BP_ARM_GPIO2", "BP_ARM_GPIO3", + "BP_ARM_GPIO4", "BP_ARM_GPIO5"; +}; + +&usb0 { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_pins>; + dr_mode = "host"; +}; + +&usb1 { + pinctrl-names = "default"; + pinctrl-0 = <&usb1_pins>; + dr_mode = "host"; +}; + +&mcspi1 { + s25fl256@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <40000000>; + + fsbl@0 { + /* 256 kB */ + label = "U-Boot-min"; + reg = <0 0x40000>; + }; + ssbl@1 { + /* 512 kB */ + label = "U-Boot"; + reg = <0x40000 0x80000>; + }; + bootenv@2 { + /* 256 kB */ + label = "U-Boot Env"; + reg = <0xc0000 0x40000>; + }; + kernel@3 { + /* 4 MB */ + label = "Kernel"; + reg = <0x100000 0x400000>; + }; + ipmi@4 { + label = "IPMI FRU"; + reg = <0x500000 0x40000>; + }; + fs@5 { + label = "File System"; + reg = <0x540000 0x1ac0000>; + }; + }; +}; + +&mcspi3 { + /* DMA event numbers stolen from MCASP */ + dmas = <&edma_xbar 8 0 16 &edma_xbar 9 0 17 + &edma_xbar 10 0 18 &edma_xbar 11 0 19>; + dma-names = "tx0", "rx0", "tx1", "rx1"; +}; + +&mcspi4 { + pinctrl-names = "default"; + pinctrl-0 = <&spi4_pins>; + + /* DMA event numbers stolen from MCASP, MCBSP */ + dmas = <&edma_xbar 12 0 20 &edma_xbar 13 0 21>; + dma-names = "tx0", "rx0"; +}; diff --git a/dts/src/arm/am437x-gp-evm.dts b/dts/src/arm/am437x-gp-evm.dts index f4a20cade8..4c6ee37ea5 100644 --- a/dts/src/arm/am437x-gp-evm.dts +++ b/dts/src/arm/am437x-gp-evm.dts @@ -71,7 +71,7 @@ pinctrl-0 = <&matrix_keypad_default>; pinctrl-1 = <&matrix_keypad_sleep>; - linux,wakeup; + wakeup-source; row-gpios = <&gpio0 3 GPIO_ACTIVE_HIGH /* Bank0, pin3 */ &gpio4 3 GPIO_ACTIVE_HIGH /* Bank4, pin3 */ diff --git a/dts/src/arm/am437x-l4.dtsi b/dts/src/arm/am437x-l4.dtsi index ca0896f802..85c6f4ff18 100644 --- a/dts/src/arm/am437x-l4.dtsi +++ b/dts/src/arm/am437x-l4.dtsi @@ -280,12 +280,6 @@ #size-cells = <1>; ranges = <0 0 0x4000>; - phy_sel: cpsw-phy-sel@650 { - compatible = "ti,am43xx-cpsw-phy-sel"; - reg= <0x650 0x4>; - reg-names = "gmii-sel"; - }; - am43xx_pinmux: pinmux@800 { compatible = "ti,am437-padconf", "pinctrl-single"; @@ -300,11 +294,17 @@ }; scm_conf: scm_conf@0 { - compatible = "syscon"; + compatible = "syscon", "simple-bus"; reg = <0x0 0x800>; #address-cells = <1>; #size-cells = <1>; + phy_gmii_sel: phy-gmii-sel { + compatible = "ti,am43xx-phy-gmii-sel"; + reg = <0x650 0x4>; + #phy-cells = <2>; + }; + scm_clocks: clocks { #address-cells = <1>; #size-cells = <0>; @@ -555,7 +555,6 @@ cpts_clock_shift = <29>; ranges = <0 0 0x8000>; syscon = <&scm_conf>; - cpsw-phy-sel = <&phy_sel>; davinci_mdio: mdio@1000 { compatible = "ti,am4372-mdio","ti,cpsw-mdio","ti,davinci_mdio"; @@ -572,11 +571,13 @@ cpsw_emac0: slave@200 { /* Filled in by U-Boot */ mac-address = [ 00 00 00 00 00 00 ]; + phys = <&phy_gmii_sel 1 0>; }; cpsw_emac1: slave@300 { /* Filled in by U-Boot */ mac-address = [ 00 00 00 00 00 00 ]; + phys = <&phy_gmii_sel 2 0>; }; }; }; diff --git a/dts/src/arm/am43x-epos-evm.dts b/dts/src/arm/am43x-epos-evm.dts index 4ea753b3ee..9dfd80e3b7 100644 --- a/dts/src/arm/am43x-epos-evm.dts +++ b/dts/src/arm/am43x-epos-evm.dts @@ -584,10 +584,7 @@ &cpsw_emac0 { phy-handle = <ðphy0>; phy-mode = "rmii"; -}; - -&phy_sel { - rmii-clock-ext; + phys = <&phy_gmii_sel 1 1>; }; &i2c0 { diff --git a/dts/src/arm/arm-realview-eb.dtsi b/dts/src/arm/arm-realview-eb.dtsi index 0e4c7c4c8c..610506723e 100644 --- a/dts/src/arm/arm-realview-eb.dtsi +++ b/dts/src/arm/arm-realview-eb.dtsi @@ -22,9 +22,10 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/gpio/gpio.h> -#include "skeleton.dtsi" / { + #address-cells = <1>; + #size-cells = <1>; compatible = "arm,realview-eb"; chosen { }; @@ -38,6 +39,7 @@ }; memory { + device_type = "memory"; /* 128 MiB memory @ 0x0 */ reg = <0x00000000 0x08000000>; }; diff --git a/dts/src/arm/arm-realview-pb1176.dts b/dts/src/arm/arm-realview-pb1176.dts index 83e0fbc4a1..cbbb8878da 100644 --- a/dts/src/arm/arm-realview-pb1176.dts +++ b/dts/src/arm/arm-realview-pb1176.dts @@ -23,9 +23,10 @@ /dts-v1/; #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/gpio/gpio.h> -#include "skeleton.dtsi" / { + #address-cells = <1>; + #size-cells = <1>; model = "ARM RealView PB1176"; compatible = "arm,realview-pb1176"; @@ -40,6 +41,7 @@ }; memory { + device_type = "memory"; /* 128 MiB memory @ 0x0 */ reg = <0x00000000 0x08000000>; }; diff --git a/dts/src/arm/arm-realview-pb11mp.dts b/dts/src/arm/arm-realview-pb11mp.dts index 2f6aa24a0b..2015619ca2 100644 --- a/dts/src/arm/arm-realview-pb11mp.dts +++ b/dts/src/arm/arm-realview-pb11mp.dts @@ -23,9 +23,10 @@ /dts-v1/; #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/gpio/gpio.h> -#include "skeleton.dtsi" / { + #address-cells = <1>; + #size-cells = <1>; model = "ARM RealView PB11MPcore"; compatible = "arm,realview-pb11mp"; @@ -39,6 +40,7 @@ }; memory { + device_type = "memory"; /* * The PB11MPCore has 512 MiB memory @ 0x70000000 * and the first 256 are also remapped @ 0x00000000 diff --git a/dts/src/arm/arm-realview-pbx.dtsi b/dts/src/arm/arm-realview-pbx.dtsi index 916a97734f..a81e9c2824 100644 --- a/dts/src/arm/arm-realview-pbx.dtsi +++ b/dts/src/arm/arm-realview-pbx.dtsi @@ -22,9 +22,10 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/gpio/gpio.h> -#include "skeleton.dtsi" / { + #address-cells = <1>; + #size-cells = <1>; compatible = "arm,realview-pbx"; chosen { }; @@ -39,6 +40,7 @@ }; memory { + device_type = "memory"; /* 128 MiB memory @ 0x0 */ reg = <0x00000000 0x08000000>; }; diff --git a/dts/src/arm/armada-370-rd.dts b/dts/src/arm/armada-370-rd.dts index 2bfb3108b5..c910d157a6 100644 --- a/dts/src/arm/armada-370-rd.dts +++ b/dts/src/arm/armada-370-rd.dts @@ -114,48 +114,6 @@ }; }; }; - - dsa { - status = "disabled"; - - compatible = "marvell,dsa"; - #address-cells = <2>; - #size-cells = <0>; - - dsa,ethernet = <ð1>; - dsa,mii-bus = <&mdio>; - - switch@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0x10 0>; /* MDIO address 16, switch 0 in tree */ - - port@0 { - reg = <0>; - label = "lan0"; - }; - - port@1 { - reg = <1>; - label = "lan1"; - }; - - port@2 { - reg = <2>; - label = "lan2"; - }; - - port@3 { - reg = <3>; - label = "lan3"; - }; - - port@5 { - reg = <5>; - label = "cpu"; - }; - }; - }; }; &pciec { diff --git a/dts/src/arm/armada-388-clearfog.dts b/dts/src/arm/armada-388-clearfog.dts index 89a354b439..20f8d46677 100644 --- a/dts/src/arm/armada-388-clearfog.dts +++ b/dts/src/arm/armada-388-clearfog.dts @@ -30,64 +30,6 @@ }; }; - dsa@0 { - status = "disabled"; - - compatible = "marvell,dsa"; - dsa,ethernet = <ð1>; - dsa,mii-bus = <&mdio>; - pinctrl-0 = <&clearfog_dsa0_clk_pins &clearfog_dsa0_pins>; - pinctrl-names = "default"; - #address-cells = <2>; - #size-cells = <0>; - - switch@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <4 0>; - - port@0 { - reg = <0>; - label = "lan5"; - }; - - port@1 { - reg = <1>; - label = "lan4"; - }; - - port@2 { - reg = <2>; - label = "lan3"; - }; - - port@3 { - reg = <3>; - label = "lan2"; - }; - - port@4 { - reg = <4>; - label = "lan1"; - }; - - port@5 { - reg = <5>; - label = "cpu"; - }; - - port@6 { - /* 88E1512 external phy */ - reg = <6>; - label = "lan6"; - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; - }; - gpio-keys { compatible = "gpio-keys"; pinctrl-0 = <&rear_button_pins>; diff --git a/dts/src/arm/armada-388-clearfog.dtsi b/dts/src/arm/armada-388-clearfog.dtsi index 1b0d0680c8..0d81600ca2 100644 --- a/dts/src/arm/armada-388-clearfog.dtsi +++ b/dts/src/arm/armada-388-clearfog.dtsi @@ -93,6 +93,7 @@ bm,pool-long = <2>; bm,pool-short = <1>; buffer-manager = <&bm>; + phys = <&comphy1 1>; phy-mode = "sgmii"; status = "okay"; }; @@ -103,6 +104,7 @@ bm,pool-short = <1>; buffer-manager = <&bm>; managed = "in-band-status"; + phys = <&comphy5 2>; phy-mode = "sgmii"; sfp = <&sfp>; status = "okay"; diff --git a/dts/src/arm/armada-38x.dtsi b/dts/src/arm/armada-38x.dtsi index 929459c427..96c18703e4 100644 --- a/dts/src/arm/armada-38x.dtsi +++ b/dts/src/arm/armada-38x.dtsi @@ -9,13 +9,15 @@ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> */ -#include "skeleton.dtsi" #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/irq.h> #define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16)) / { + #address-cells = <1>; + #size-cells = <1>; + model = "Marvell Armada 38x family SoC"; compatible = "marvell,armada380"; @@ -335,6 +337,43 @@ #clock-cells = <1>; }; + comphy: phy@18300 { + compatible = "marvell,armada-380-comphy"; + reg = <0x18300 0x100>; + #address-cells = <1>; + #size-cells = <0>; + + comphy0: phy@0 { + reg = <0>; + #phy-cells = <1>; + }; + + comphy1: phy@1 { + reg = <1>; + #phy-cells = <1>; + }; + + comphy2: phy@2 { + reg = <2>; + #phy-cells = <1>; + }; + + comphy3: phy@3 { + reg = <3>; + #phy-cells = <1>; + }; + + comphy4: phy@4 { + reg = <4>; + #phy-cells = <1>; + }; + + comphy5: phy@5 { + reg = <5>; + #phy-cells = <1>; + }; + }; + coreclk: mvebu-sar@18600 { compatible = "marvell,armada-380-core-clock"; reg = <0x18600 0x04>; diff --git a/dts/src/arm/armada-39x.dtsi b/dts/src/arm/armada-39x.dtsi index f0c949831e..b1b86934c6 100644 --- a/dts/src/arm/armada-39x.dtsi +++ b/dts/src/arm/armada-39x.dtsi @@ -7,13 +7,14 @@ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> */ -#include "skeleton.dtsi" #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/irq.h> #define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16)) / { + #address-cells = <1>; + #size-cells = <1>; model = "Marvell Armada 39x family SoC"; compatible = "marvell,armada390"; diff --git a/dts/src/arm/armada-xp-linksys-mamba.dts b/dts/src/arm/armada-xp-linksys-mamba.dts index 7a2606c3b6..8480a16919 100644 --- a/dts/src/arm/armada-xp-linksys-mamba.dts +++ b/dts/src/arm/armada-xp-linksys-mamba.dts @@ -210,53 +210,6 @@ compatible = "pwm-fan"; pwms = <&gpio0 24 4000>; }; - - dsa { - status = "disabled"; - - compatible = "marvell,dsa"; - #address-cells = <2>; - #size-cells = <0>; - - dsa,ethernet = <ð0>; - dsa,mii-bus = <&mdio>; - - switch@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0x0 0>; /* MDIO address 0, switch 0 in tree */ - - port@0 { - reg = <0>; - label = "lan4"; - }; - - port@1 { - reg = <1>; - label = "lan3"; - }; - - port@2 { - reg = <2>; - label = "lan2"; - }; - - port@3 { - reg = <3>; - label = "lan1"; - }; - - port@4 { - reg = <4>; - label = "internet"; - }; - - port@5 { - reg = <5>; - label = "cpu"; - }; - }; - }; }; &pciec { diff --git a/dts/src/arm/artpec6.dtsi b/dts/src/arm/artpec6.dtsi index 3e4115c2cd..037157e6c5 100644 --- a/dts/src/arm/artpec6.dtsi +++ b/dts/src/arm/artpec6.dtsi @@ -43,9 +43,10 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/dma/nbpfaxi.h> #include <dt-bindings/clock/axis,artpec6-clkctrl.h> -#include "skeleton.dtsi" / { + #address-cells = <1>; + #size-cells = <1>; compatible = "axis,artpec6"; interrupt-parent = <&intc>; diff --git a/dts/src/arm/aspeed-bmc-arm-stardragon4800-rep2.dts b/dts/src/arm/aspeed-bmc-arm-stardragon4800-rep2.dts index bdfd8c9f3a..521afbea2c 100644 --- a/dts/src/arm/aspeed-bmc-arm-stardragon4800-rep2.dts +++ b/dts/src/arm/aspeed-bmc-arm-stardragon4800-rep2.dts @@ -173,6 +173,16 @@ }; }; }; + + dps650ab@58 { + compatible = "delta,dps650ab"; + reg = <0x58>; + }; + + dps650ab@59 { + compatible = "delta,dps650ab"; + reg = <0x59>; + }; }; &i2c9 { diff --git a/dts/src/arm/aspeed-bmc-facebook-tiogapass.dts b/dts/src/arm/aspeed-bmc-facebook-tiogapass.dts index f8e7b71af7..4c2dcac738 100644 --- a/dts/src/arm/aspeed-bmc-facebook-tiogapass.dts +++ b/dts/src/arm/aspeed-bmc-facebook-tiogapass.dts @@ -21,6 +21,17 @@ memory@80000000 { reg = <0x80000000 0x20000000>; }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, + <&adc 4>, <&adc 5>, <&adc 6>; + }; + + iio-hwmon-battery { + compatible = "iio-hwmon"; + io-channels = <&adc 7>; + }; }; &fmc { @@ -43,6 +54,16 @@ }; }; +&lpc_snoop { + status = "okay"; + snoop-ports = <0x80>; +}; + +&lpc_ctrl { + // Enable lpc clock + status = "okay"; +}; + &uart1 { // Host Console status = "okay"; @@ -51,11 +72,33 @@ &pinctrl_rxd1_default>; }; +&uart2 { + // SoL Host Console + status = "okay"; +}; + +&uart3 { + // SoL BMC Console + status = "okay"; +}; + &uart5 { // BMC Console status = "okay"; }; +&kcs2 { + // BMC KCS channel 2 + status = "okay"; + kcs_addr = <0xca8>; +}; + +&kcs3 { + // BMC KCS channel 3 + status = "okay"; + kcs_addr = <0xca2>; +}; + &mac0 { status = "okay"; @@ -64,6 +107,10 @@ use-ncsi; }; +&adc { + status = "okay"; +}; + &i2c0 { status = "okay"; //Airmax Conn B, CPU0 PIROM, CPU1 PIROM @@ -122,6 +169,10 @@ &i2c8 { status = "okay"; + tmp421@1f { + compatible = "ti,tmp421"; + reg = <0x1f>; + }; //Mezz Sensor SMBus }; @@ -140,7 +191,7 @@ }; fan@1 { - reg = <0x00>; - aspeed,fan-tach-ch = /bits/ 8 <0x01>; + reg = <0x01>; + aspeed,fan-tach-ch = /bits/ 8 <0x02>; }; }; diff --git a/dts/src/arm/aspeed-bmc-inspur-on5263m5.dts b/dts/src/arm/aspeed-bmc-inspur-on5263m5.dts new file mode 100644 index 0000000000..2337ee23f5 --- /dev/null +++ b/dts/src/arm/aspeed-bmc-inspur-on5263m5.dts @@ -0,0 +1,145 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2018 Inspur Corporation +/dts-v1/; + +#include "aspeed-g5.dtsi" +#include <dt-bindings/gpio/aspeed-gpio.h> + +/ { + model = "ON5263M5 BMC"; + compatible = "inspur,on5263m5-bmc", "aspeed,ast2500"; + + chosen { + stdout-path = &uart5; + bootargs = "earlyprintk"; + }; + + memory { + reg = <0x80000000 0x20000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + vga_memory: framebuffer@9f000000 { + no-map; + reg = <0x9f000000 0x01000000>; + }; + }; + + leds { + compatible = "gpio-leds"; + bmc_alive { + label = "bmc_alive"; + gpios = <&gpio ASPEED_GPIO(I, 1) GPIO_ACTIVE_LOW>; + linux,default-trigger = "timer"; + }; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, + <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>; + }; + +}; + +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bmc"; +#include "openbmc-flash-layout.dtsi" + }; +}; + +&spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1_default>; + + flash@0 { + status = "okay"; + m25p,fast-read; + label = "pnor"; + }; +}; + +&uart5 { + status = "okay"; +}; + +&mac0 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii1_default>; + use-ncsi; +}; + +&mac1 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>; +}; + +&i2c6 { + status = "okay"; + + tmp421@4e { + compatible = "ti,tmp421"; + reg = <0x4e>; + }; + + tmp112@48 { + compatible = "ti,tmp112"; + reg = <0x48>; + }; + + eeprom@54 { + compatible = "atmel,24c64"; + reg = <0x54>; + pagesize = <32>; + }; +}; + +&i2c7 { + status = "okay"; + + adm1278@11 { + compatible = "adi,adm1278"; + reg = <0x11>; + }; +}; + +&gfx { + status = "okay"; +}; + +&pinctrl { + aspeed,external-nodes = <&gfx &lhc>; +}; + +&pwm_tacho { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default>; + + fan@0 { + reg = <0x00>; + aspeed,fan-tach-ch = /bits/ 8 <0x00 0x01>; + }; + + fan@1 { + reg = <0x01>; + aspeed,fan-tach-ch = /bits/ 8 <0x02 0x03>; + }; +}; + +&adc { + status = "okay"; +}; diff --git a/dts/src/arm/aspeed-bmc-opp-palmetto.dts b/dts/src/arm/aspeed-bmc-opp-palmetto.dts index 9aa1d44674..b854ac0bae 100644 --- a/dts/src/arm/aspeed-bmc-opp-palmetto.dts +++ b/dts/src/arm/aspeed-bmc-opp-palmetto.dts @@ -169,6 +169,11 @@ &i2c3 { status = "okay"; + + occ-hwmon@50 { + compatible = "ibm,p8-occ-hwmon"; + reg = <0x50>; + }; }; &i2c4 { diff --git a/dts/src/arm/aspeed-bmc-quanta-q71l.dts b/dts/src/arm/aspeed-bmc-quanta-q71l.dts index 385c0f4b69..0d7c6339da 100644 --- a/dts/src/arm/aspeed-bmc-quanta-q71l.dts +++ b/dts/src/arm/aspeed-bmc-quanta-q71l.dts @@ -116,6 +116,10 @@ status = "okay"; }; +&lpc_ctrl { + status = "okay"; +}; + &lpc_snoop { status = "okay"; snoop-ports = <0x80>; @@ -134,6 +138,10 @@ pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>; }; +&uart1 { + status = "okay"; +}; + &uart5 { status = "okay"; }; diff --git a/dts/src/arm/aspeed-g4.dtsi b/dts/src/arm/aspeed-g4.dtsi index 69f6b9d2e7..9549f867aa 100644 --- a/dts/src/arm/aspeed-g4.dtsi +++ b/dts/src/arm/aspeed-g4.dtsi @@ -197,6 +197,7 @@ gpio-ranges = <&pinctrl 0 0 220>; clocks = <&syscon ASPEED_CLK_APB>; interrupt-controller; + #interrupt-cells = <2>; }; timer: timer@1e782000 { diff --git a/dts/src/arm/aspeed-g5.dtsi b/dts/src/arm/aspeed-g5.dtsi index d107459fc0..85ed9dbec1 100644 --- a/dts/src/arm/aspeed-g5.dtsi +++ b/dts/src/arm/aspeed-g5.dtsi @@ -47,6 +47,13 @@ reg = <0x80000000 0>; }; + edac: sdram@1e6e0000 { + compatible = "aspeed,ast2500-sdram-edac"; + reg = <0x1e6e0000 0x174>; + interrupts = <0>; + status = "disabled"; + }; + ahb { compatible = "simple-bus"; #address-cells = <1>; @@ -250,6 +257,7 @@ gpio-ranges = <&pinctrl 0 0 220>; clocks = <&syscon ASPEED_CLK_APB>; interrupt-controller; + #interrupt-cells = <2>; }; timer: timer@1e782000 { @@ -330,8 +338,32 @@ ranges = <0x0 0x1e789000 0x1000>; lpc_bmc: lpc-bmc@0 { - compatible = "aspeed,ast2500-lpc-bmc"; + compatible = "aspeed,ast2500-lpc-bmc", "simple-mfd", "syscon"; reg = <0x0 0x80>; + reg-io-width = <4>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x80>; + + kcs1: kcs1@0 { + compatible = "aspeed,ast2500-kcs-bmc"; + interrupts = <8>; + kcs_chan = <1>; + status = "disabled"; + }; + kcs2: kcs2@0 { + compatible = "aspeed,ast2500-kcs-bmc"; + interrupts = <8>; + kcs_chan = <2>; + status = "disabled"; + }; + kcs3: kcs3@0 { + compatible = "aspeed,ast2500-kcs-bmc"; + interrupts = <8>; + kcs_chan = <3>; + status = "disabled"; + }; }; lpc_host: lpc-host@80 { @@ -343,6 +375,13 @@ #size-cells = <1>; ranges = <0x0 0x80 0x1e0>; + kcs4: kcs4@0 { + compatible = "aspeed,ast2500-kcs-bmc"; + interrupts = <8>; + kcs_chan = <4>; + status = "disabled"; + }; + lpc_ctrl: lpc-ctrl@0 { compatible = "aspeed,ast2500-lpc-ctrl"; reg = <0x0 0x80>; diff --git a/dts/src/arm/at91-nattis-2-natte-2.dts b/dts/src/arm/at91-nattis-2-natte-2.dts index 0f6d335125..f245944bd5 100644 --- a/dts/src/arm/at91-nattis-2-natte-2.dts +++ b/dts/src/arm/at91-nattis-2-natte-2.dts @@ -22,7 +22,7 @@ wakeup { label = "Wakeup"; linux,code = <10>; - gpio-key,wakeup; + wakeup-source; gpios = <&pioB 27 GPIO_ACTIVE_LOW>; }; }; diff --git a/dts/src/arm/at91-sama5d27_som1.dtsi b/dts/src/arm/at91-sama5d27_som1.dtsi index cf0087b4c9..33a159c016 100644 --- a/dts/src/arm/at91-sama5d27_som1.dtsi +++ b/dts/src/arm/at91-sama5d27_som1.dtsi @@ -62,6 +62,20 @@ ahb { apb { + qspi1: spi@f0024000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_qspi1_default>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <80000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + m25p,fast-read; + }; + }; + macb0: ethernet@f8008000 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_macb0_default>; @@ -78,6 +92,22 @@ pinctrl@fc038000 { + pinctrl_qspi1_default: qspi1_default { + sck_cs { + pinmux = <PIN_PB5__QSPI1_SCK>, + <PIN_PB6__QSPI1_CS>; + bias-disable; + }; + + data { + pinmux = <PIN_PB7__QSPI1_IO0>, + <PIN_PB8__QSPI1_IO1>, + <PIN_PB9__QSPI1_IO2>, + <PIN_PB10__QSPI1_IO3>; + bias-pull-up; + }; + }; + pinctrl_macb0_default: macb0_default { pinmux = <PIN_PD9__GTXCK>, <PIN_PD10__GTXEN>, diff --git a/dts/src/arm/at91-sama5d27_som1_ek.dts b/dts/src/arm/at91-sama5d27_som1_ek.dts index 4a258867dd..a48180555e 100644 --- a/dts/src/arm/at91-sama5d27_som1_ek.dts +++ b/dts/src/arm/at91-sama5d27_som1_ek.dts @@ -109,6 +109,10 @@ status = "okay"; }; + qspi1: spi@f0024000 { + status = "okay"; + }; + spi0: spi@f8000000 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0_default>; diff --git a/dts/src/arm/at91-wb45n.dts b/dts/src/arm/at91-wb45n.dts index 5b9512a6c8..54d130c921 100644 --- a/dts/src/arm/at91-wb45n.dts +++ b/dts/src/arm/at91-wb45n.dts @@ -22,7 +22,7 @@ label = "IRQBTN"; linux,code = <99>; gpios = <&pioB 18 GPIO_ACTIVE_LOW>; - gpio-key,wakeup = <1>; + wakeup-source; }; }; }; diff --git a/dts/src/arm/at91-wb50n.dts b/dts/src/arm/at91-wb50n.dts index 8cecc7051a..a5e45bb95c 100644 --- a/dts/src/arm/at91-wb50n.dts +++ b/dts/src/arm/at91-wb50n.dts @@ -23,7 +23,7 @@ label = "BTNESC"; linux,code = <1>; /* ESC button */ gpios = <&pioA 10 GPIO_ACTIVE_LOW>; - gpio-key,wakeup = <1>; + wakeup-source; }; irqbtn@31 { @@ -31,7 +31,7 @@ label = "IRQBTN"; linux,code = <99>; /* SysReq button */ gpios = <&pioE 31 GPIO_ACTIVE_LOW>; - gpio-key,wakeup = <1>; + wakeup-source; }; }; diff --git a/dts/src/arm/at91rm9200.dtsi b/dts/src/arm/at91rm9200.dtsi index 2ad69a7fbc..5a882a0538 100644 --- a/dts/src/arm/at91rm9200.dtsi +++ b/dts/src/arm/at91rm9200.dtsi @@ -10,13 +10,14 @@ * Licensed under GPLv2 or later. */ -#include "skeleton.dtsi" #include <dt-bindings/pinctrl/at91.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/clock/at91.h> / { + #address-cells = <1>; + #size-cells = <1>; model = "Atmel AT91RM9200 family SoC"; compatible = "atmel,at91rm9200"; interrupt-parent = <&aic>; @@ -49,6 +50,7 @@ }; memory { + device_type = "memory"; reg = <0x20000000 0x04000000>; }; diff --git a/dts/src/arm/at91sam9260.dtsi b/dts/src/arm/at91sam9260.dtsi index 7cd9c3bc4d..3b58b94b53 100644 --- a/dts/src/arm/at91sam9260.dtsi +++ b/dts/src/arm/at91sam9260.dtsi @@ -8,13 +8,14 @@ * Licensed under GPLv2 or later. */ -#include "skeleton.dtsi" #include <dt-bindings/pinctrl/at91.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/clock/at91.h> / { + #address-cells = <1>; + #size-cells = <1>; model = "Atmel AT91SAM9260 family SoC"; compatible = "atmel,at91sam9260"; interrupt-parent = <&aic>; @@ -46,6 +47,7 @@ }; memory { + device_type = "memory"; reg = <0x20000000 0x04000000>; }; diff --git a/dts/src/arm/at91sam9261.dtsi b/dts/src/arm/at91sam9261.dtsi index 01d700b63b..a907a1fdd2 100644 --- a/dts/src/arm/at91sam9261.dtsi +++ b/dts/src/arm/at91sam9261.dtsi @@ -6,13 +6,14 @@ * Licensed under GPLv2 only. */ -#include "skeleton.dtsi" #include <dt-bindings/pinctrl/at91.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/clock/at91.h> / { + #address-cells = <1>; + #size-cells = <1>; model = "Atmel AT91SAM9261 family SoC"; compatible = "atmel,at91sam9261"; interrupt-parent = <&aic>; @@ -43,6 +44,7 @@ }; memory { + device_type = "memory"; reg = <0x20000000 0x08000000>; }; diff --git a/dts/src/arm/at91sam9263.dtsi b/dts/src/arm/at91sam9263.dtsi index c5766da4e5..3fb63d81f1 100644 --- a/dts/src/arm/at91sam9263.dtsi +++ b/dts/src/arm/at91sam9263.dtsi @@ -6,13 +6,14 @@ * Licensed under GPLv2 only. */ -#include "skeleton.dtsi" #include <dt-bindings/pinctrl/at91.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/clock/at91.h> / { + #address-cells = <1>; + #size-cells = <1>; model = "Atmel AT91SAM9263 family SoC"; compatible = "atmel,at91sam9263"; interrupt-parent = <&aic>; @@ -45,6 +46,7 @@ }; memory { + device_type = "memory"; reg = <0x20000000 0x08000000>; }; diff --git a/dts/src/arm/at91sam9g45.dtsi b/dts/src/arm/at91sam9g45.dtsi index d16db1fa7e..f368196071 100644 --- a/dts/src/arm/at91sam9g45.dtsi +++ b/dts/src/arm/at91sam9g45.dtsi @@ -9,7 +9,6 @@ * Licensed under GPLv2 or later. */ -#include "skeleton.dtsi" #include <dt-bindings/dma/at91.h> #include <dt-bindings/pinctrl/at91.h> #include <dt-bindings/interrupt-controller/irq.h> @@ -17,6 +16,8 @@ #include <dt-bindings/clock/at91.h> / { + #address-cells = <1>; + #size-cells = <1>; model = "Atmel AT91SAM9G45 family SoC"; compatible = "atmel,at91sam9g45"; interrupt-parent = <&aic>; @@ -51,6 +52,7 @@ }; memory { + device_type = "memory"; reg = <0x70000000 0x10000000>; }; diff --git a/dts/src/arm/at91sam9n12.dtsi b/dts/src/arm/at91sam9n12.dtsi index 37cb81f457..f71d65e6e5 100644 --- a/dts/src/arm/at91sam9n12.dtsi +++ b/dts/src/arm/at91sam9n12.dtsi @@ -7,7 +7,6 @@ * Licensed under GPLv2 or later. */ -#include "skeleton.dtsi" #include <dt-bindings/dma/at91.h> #include <dt-bindings/pinctrl/at91.h> #include <dt-bindings/interrupt-controller/irq.h> @@ -15,6 +14,8 @@ #include <dt-bindings/clock/at91.h> / { + #address-cells = <1>; + #size-cells = <1>; model = "Atmel AT91SAM9N12 SoC"; compatible = "atmel,at91sam9n12"; interrupt-parent = <&aic>; @@ -47,6 +48,7 @@ }; memory { + device_type = "memory"; reg = <0x20000000 0x10000000>; }; diff --git a/dts/src/arm/at91sam9rl.dtsi b/dts/src/arm/at91sam9rl.dtsi index 3862ff2f26..6b5777f3c2 100644 --- a/dts/src/arm/at91sam9rl.dtsi +++ b/dts/src/arm/at91sam9rl.dtsi @@ -7,7 +7,6 @@ * Licensed under GPLv2 or later. */ -#include "skeleton.dtsi" #include <dt-bindings/pinctrl/at91.h> #include <dt-bindings/clock/at91.h> #include <dt-bindings/interrupt-controller/irq.h> @@ -15,6 +14,8 @@ #include <dt-bindings/pwm/pwm.h> / { + #address-cells = <1>; + #size-cells = <1>; model = "Atmel AT91SAM9RL family SoC"; compatible = "atmel,at91sam9rl", "atmel,at91sam9"; interrupt-parent = <&aic>; @@ -48,6 +49,7 @@ }; memory { + device_type = "memory"; reg = <0x20000000 0x04000000>; }; diff --git a/dts/src/arm/at91sam9x5.dtsi b/dts/src/arm/at91sam9x5.dtsi index 07443a387a..79c4956d39 100644 --- a/dts/src/arm/at91sam9x5.dtsi +++ b/dts/src/arm/at91sam9x5.dtsi @@ -9,7 +9,6 @@ * Licensed under GPLv2 or later. */ -#include "skeleton.dtsi" #include <dt-bindings/dma/at91.h> #include <dt-bindings/pinctrl/at91.h> #include <dt-bindings/interrupt-controller/irq.h> @@ -17,6 +16,8 @@ #include <dt-bindings/clock/at91.h> / { + #address-cells = <1>; + #size-cells = <1>; model = "Atmel AT91SAM9x5 family SoC"; compatible = "atmel,at91sam9x5"; interrupt-parent = <&aic>; @@ -49,6 +50,7 @@ }; memory { + device_type = "memory"; reg = <0x20000000 0x10000000>; }; diff --git a/dts/src/arm/atlas6-evb.dts b/dts/src/arm/atlas6-evb.dts index ab042ca8de..4088241930 100644 --- a/dts/src/arm/atlas6-evb.dts +++ b/dts/src/arm/atlas6-evb.dts @@ -15,6 +15,7 @@ compatible = "sirf,atlas6-cb", "sirf,atlas6"; memory { + device_type = "memory"; reg = <0x00000000 0x20000000>; }; diff --git a/dts/src/arm/atlas6.dtsi b/dts/src/arm/atlas6.dtsi index 2959866742..5587b98032 100644 --- a/dts/src/arm/atlas6.dtsi +++ b/dts/src/arm/atlas6.dtsi @@ -6,7 +6,6 @@ * Licensed under GPLv2 or later. */ -/include/ "skeleton.dtsi" / { compatible = "sirf,atlas6"; #address-cells = <1>; diff --git a/dts/src/arm/atlas7.dtsi b/dts/src/arm/atlas7.dtsi index 83449b33de..f3de9af35b 100644 --- a/dts/src/arm/atlas7.dtsi +++ b/dts/src/arm/atlas7.dtsi @@ -6,7 +6,6 @@ * Licensed under GPLv2 or later. */ -/include/ "skeleton.dtsi" / { compatible = "sirf,atlas7"; #address-cells = <1>; diff --git a/dts/src/arm/axm55xx.dtsi b/dts/src/arm/axm55xx.dtsi index 47799f59fa..2a93d3ee3b 100644 --- a/dts/src/arm/axm55xx.dtsi +++ b/dts/src/arm/axm55xx.dtsi @@ -12,9 +12,9 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/lsi,axm5516-clks.h> -#include "skeleton64.dtsi" - / { + #address-cells = <2>; + #size-cells = <2>; interrupt-parent = <&gic>; aliases { diff --git a/dts/src/arm/bcm-cygnus.dtsi b/dts/src/arm/bcm-cygnus.dtsi index 253df7170a..5f7b46503a 100644 --- a/dts/src/arm/bcm-cygnus.dtsi +++ b/dts/src/arm/bcm-cygnus.dtsi @@ -34,9 +34,9 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/clock/bcm-cygnus.h> -#include "skeleton.dtsi" - / { + #address-cells = <1>; + #size-cells = <1>; compatible = "brcm,cygnus"; model = "Broadcom Cygnus SoC"; interrupt-parent = <&gic>; @@ -45,6 +45,11 @@ ethernet0 = ð0; }; + memory { + device_type = "memory"; + reg = <0 0>; + }; + cpus { #address-cells = <1>; #size-cells = <0>; diff --git a/dts/src/arm/bcm-nsp.dtsi b/dts/src/arm/bcm-nsp.dtsi index 0d2538b461..6925b30c22 100644 --- a/dts/src/arm/bcm-nsp.dtsi +++ b/dts/src/arm/bcm-nsp.dtsi @@ -34,9 +34,9 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/clock/bcm-nsp.h> -#include "skeleton.dtsi" - / { + #address-cells = <1>; + #size-cells = <1>; compatible = "brcm,nsp"; model = "Broadcom Northstar Plus SoC"; interrupt-parent = <&gic>; diff --git a/dts/src/arm/bcm11351.dtsi b/dts/src/arm/bcm11351.dtsi index db7cded1b7..b99c2e5796 100644 --- a/dts/src/arm/bcm11351.dtsi +++ b/dts/src/arm/bcm11351.dtsi @@ -16,9 +16,9 @@ #include "dt-bindings/clock/bcm281xx.h" -#include "skeleton.dtsi" - / { + #address-cells = <1>; + #size-cells = <1>; model = "BCM11351 SoC"; compatible = "brcm,bcm11351"; interrupt-parent = <&gic>; diff --git a/dts/src/arm/bcm21664-garnet.dts b/dts/src/arm/bcm21664-garnet.dts index e87cb26ddf..8b045cfab6 100644 --- a/dts/src/arm/bcm21664-garnet.dts +++ b/dts/src/arm/bcm21664-garnet.dts @@ -22,6 +22,7 @@ compatible = "brcm,bcm21664-garnet", "brcm,bcm21664"; memory { + device_type = "memory"; reg = <0x80000000 0x40000000>; /* 1 GB */ }; diff --git a/dts/src/arm/bcm21664.dtsi b/dts/src/arm/bcm21664.dtsi index 266f2611dc..758daa3341 100644 --- a/dts/src/arm/bcm21664.dtsi +++ b/dts/src/arm/bcm21664.dtsi @@ -16,9 +16,9 @@ #include "dt-bindings/clock/bcm21664.h" -#include "skeleton.dtsi" - / { + #address-cells = <1>; + #size-cells = <1>; model = "BCM21664 SoC"; compatible = "brcm,bcm21664"; interrupt-parent = <&gic>; diff --git a/dts/src/arm/bcm23550-sparrow.dts b/dts/src/arm/bcm23550-sparrow.dts index 4d525ccb48..1c66b15f30 100644 --- a/dts/src/arm/bcm23550-sparrow.dts +++ b/dts/src/arm/bcm23550-sparrow.dts @@ -46,6 +46,7 @@ }; memory { + device_type = "memory"; reg = <0x80000000 0x20000000>; /* 512 MB */ }; }; diff --git a/dts/src/arm/bcm23550.dtsi b/dts/src/arm/bcm23550.dtsi index a7a643f383..701198f5f4 100644 --- a/dts/src/arm/bcm23550.dtsi +++ b/dts/src/arm/bcm23550.dtsi @@ -36,9 +36,9 @@ /* BCM23550 and BCM21664 have almost identical clocks */ #include "dt-bindings/clock/bcm21664.h" -#include "skeleton.dtsi" - / { + #address-cells = <1>; + #size-cells = <1>; model = "BCM23550 SoC"; compatible = "brcm,bcm23550"; interrupt-parent = <&gic>; diff --git a/dts/src/arm/bcm28155-ap.dts b/dts/src/arm/bcm28155-ap.dts index 9ce91dd60c..fbfca83bd2 100644 --- a/dts/src/arm/bcm28155-ap.dts +++ b/dts/src/arm/bcm28155-ap.dts @@ -22,6 +22,7 @@ compatible = "brcm,bcm28155-ap", "brcm,bcm11351"; memory { + device_type = "memory"; reg = <0x80000000 0x40000000>; /* 1 GB */ }; diff --git a/dts/src/arm/bcm2835-rpi-a-plus.dts b/dts/src/arm/bcm2835-rpi-a-plus.dts index 2cd9c5e4f8..db8a6017f2 100644 --- a/dts/src/arm/bcm2835-rpi-a-plus.dts +++ b/dts/src/arm/bcm2835-rpi-a-plus.dts @@ -31,8 +31,8 @@ * "FOO" = GPIO line named "FOO" on the schematic * "FOO_N" = GPIO line named "FOO" on schematic, active low */ - gpio-line-names = "SDA0", - "SCL0", + gpio-line-names = "ID_SDA", + "ID_SCL", "SDA1", "SCL1", "GPIO_GCLK", diff --git a/dts/src/arm/bcm2835-rpi-b-plus.dts b/dts/src/arm/bcm2835-rpi-b-plus.dts index cfbdaacbae..1e40d672b0 100644 --- a/dts/src/arm/bcm2835-rpi-b-plus.dts +++ b/dts/src/arm/bcm2835-rpi-b-plus.dts @@ -33,8 +33,8 @@ * "FOO" = GPIO line named "FOO" on the schematic * "FOO_N" = GPIO line named "FOO" on schematic, active low */ - gpio-line-names = "SDA0", - "SCL0", + gpio-line-names = "ID_SDA", + "ID_SCL", "SDA1", "SCL1", "GPIO_GCLK", diff --git a/dts/src/arm/bcm2835-rpi-b-rev2.dts b/dts/src/arm/bcm2835-rpi-b-rev2.dts index 5641d162df..28e7513ce6 100644 --- a/dts/src/arm/bcm2835-rpi-b-rev2.dts +++ b/dts/src/arm/bcm2835-rpi-b-rev2.dts @@ -93,7 +93,7 @@ }; &hdmi { - hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>; + hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>; }; &pwm { diff --git a/dts/src/arm/bcm2835-rpi-zero-w.dts b/dts/src/arm/bcm2835-rpi-zero-w.dts index 644d907baf..ba0167df6c 100644 --- a/dts/src/arm/bcm2835-rpi-zero-w.dts +++ b/dts/src/arm/bcm2835-rpi-zero-w.dts @@ -25,8 +25,6 @@ wifi_pwrseq: wifi-pwrseq { compatible = "mmc-pwrseq-simple"; - pinctrl-names = "default"; - pinctrl-0 = <&wl_on>; reset-gpios = <&gpio 41 GPIO_ACTIVE_LOW>; }; }; @@ -40,8 +38,8 @@ * "FOO" = GPIO line named "FOO" on the schematic * "FOO_N" = GPIO line named "FOO" on schematic, active low */ - gpio-line-names = "GPIO0", - "GPIO1", + gpio-line-names = "ID_SDA", + "ID_SCL", "SDA1", "SCL1", "GPIO_GCLK", @@ -98,11 +96,6 @@ "SD_DATA3_R"; pinctrl-0 = <&gpioout &alt0>; - - wl_on: wl-on { - brcm,pins = <41>; - brcm,function = <BCM2835_FSEL_GPIO_OUT>; - }; }; &hdmi { diff --git a/dts/src/arm/bcm2835-rpi-zero.dts b/dts/src/arm/bcm2835-rpi-zero.dts index 00323ba8f7..3b35a8a4a5 100644 --- a/dts/src/arm/bcm2835-rpi-zero.dts +++ b/dts/src/arm/bcm2835-rpi-zero.dts @@ -28,8 +28,8 @@ * "FOO" = GPIO line named "FOO" on the schematic * "FOO_N" = GPIO line named "FOO" on schematic, active low */ - gpio-line-names = "SDA0", - "SCL0", + gpio-line-names = "ID_SDA", + "ID_SCL", "SDA1", "SCL1", "GPIO_GCLK", diff --git a/dts/src/arm/bcm2835-rpi.dtsi b/dts/src/arm/bcm2835-rpi.dtsi index 29f970f864..715d50c645 100644 --- a/dts/src/arm/bcm2835-rpi.dtsi +++ b/dts/src/arm/bcm2835-rpi.dtsi @@ -1,7 +1,7 @@ #include <dt-bindings/power/raspberrypi-power.h> / { - memory { + memory@0 { device_type = "memory"; reg = <0 0x10000000>; }; @@ -19,8 +19,6 @@ soc { firmware: firmware { compatible = "raspberrypi,bcm2835-firmware", "simple-bus"; - #address-cells = <0>; - #size-cells = <0>; mboxes = <&mailbox>; }; @@ -87,10 +85,6 @@ power-domains = <&power RPI_POWER_DOMAIN_USB>; }; -&v3d { - power-domains = <&power RPI_POWER_DOMAIN_V3D>; -}; - &hdmi { power-domains = <&power RPI_POWER_DOMAIN_HDMI>; status = "okay"; diff --git a/dts/src/arm/bcm2836-rpi-2-b.dts b/dts/src/arm/bcm2836-rpi-2-b.dts index ac4408b34b..7b4e651baf 100644 --- a/dts/src/arm/bcm2836-rpi-2-b.dts +++ b/dts/src/arm/bcm2836-rpi-2-b.dts @@ -9,7 +9,7 @@ compatible = "raspberrypi,2-model-b", "brcm,bcm2836"; model = "Raspberry Pi 2 Model B"; - memory { + memory@0 { reg = <0 0x40000000>; }; @@ -28,6 +28,72 @@ }; &gpio { + /* + * Taken from rpi_SCH_2b_1p2_reduced.pdf and + * the official GPU firmware DT blob. + * + * Legend: + * "NC" = not connected (no rail from the SoC) + * "FOO" = GPIO line named "FOO" on the schematic + * "FOO_N" = GPIO line named "FOO" on schematic, active low + */ + gpio-line-names = "ID_SDA", + "ID_SCL", + "SDA1", + "SCL1", + "GPIO_GCLK", + "GPIO5", + "GPIO6", + "SPI_CE1_N", + "SPI_CE0_N", + "SPI_MISO", + "SPI_MOSI", + "SPI_SCLK", + "GPIO12", + "GPIO13", + /* Serial port */ + "TXD0", + "RXD0", + "GPIO16", + "GPIO17", + "GPIO18", + "GPIO19", + "GPIO20", + "GPIO21", + "GPIO22", + "GPIO23", + "GPIO24", + "GPIO25", + "GPIO26", + "GPIO27", + "SDA0", + "SCL0", + "", /* GPIO30 */ + "LAN_RUN", + "CAM_GPIO1", + "", /* GPIO33 */ + "", /* GPIO34 */ + "PWR_LOW_N", + "", /* GPIO36 */ + "", /* GPIO37 */ + "USB_LIMIT", + "", /* GPIO39 */ + "PWM0_OUT", + "CAM_GPIO0", + "SMPS_SCL", + "SMPS_SDA", + "ETHCLK", + "PWM1_OUT", + "HDMI_HPD_N", + "STATUS_LED", + /* Used by SD Card */ + "SD_CLK_R", + "SD_CMD_R", + "SD_DATA0_R", + "SD_DATA1_R", + "SD_DATA2_R", + "SD_DATA3_R"; + pinctrl-0 = <&gpioout &alt0 &i2s_alt0>; /* I2S interface */ diff --git a/dts/src/arm/bcm2837-rpi-3-a-plus.dts b/dts/src/arm/bcm2837-rpi-3-a-plus.dts new file mode 100644 index 0000000000..7f4437a8ee --- /dev/null +++ b/dts/src/arm/bcm2837-rpi-3-a-plus.dts @@ -0,0 +1,175 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; +#include "bcm2837.dtsi" +#include "bcm2836-rpi.dtsi" +#include "bcm283x-rpi-usb-host.dtsi" + +/ { + compatible = "raspberrypi,3-model-a-plus", "brcm,bcm2837"; + model = "Raspberry Pi 3 Model A+"; + + chosen { + /* 8250 auxiliary UART instead of pl011 */ + stdout-path = "serial1:115200n8"; + }; + + memory@0 { + reg = <0 0x20000000>; + }; + + leds { + act { + gpios = <&gpio 29 GPIO_ACTIVE_HIGH>; + }; + + pwr { + label = "PWR"; + gpios = <&expgpio 2 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&firmware { + expgpio: gpio { + compatible = "raspberrypi,firmware-gpio"; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "", + "BT_WL_ON", + "STATUS_LED_R", + "", + "", + "CAM_GPIO0", + "CAM_GPIO1", + ""; + status = "okay"; + }; +}; + +&gpio { + /* + * This is mostly based on the official GPU firmware DT blob. + * + * Legend: + * "NC" = not connected (no rail from the SoC) + * "FOO" = GPIO line named "FOO" on the schematic + * "FOO_N" = GPIO line named "FOO" on schematic, active low + */ + gpio-line-names = "ID_SDA", + "ID_SCL", + "SDA1", + "SCL1", + "GPIO_GCLK", + "GPIO5", + "GPIO6", + "SPI_CE1_N", + "SPI_CE0_N", + "SPI_MISO", + "SPI_MOSI", + "SPI_SCLK", + "GPIO12", + "GPIO13", + /* Serial port */ + "TXD1", + "RXD1", + "GPIO16", + "GPIO17", + "GPIO18", + "GPIO19", + "GPIO20", + "GPIO21", + "GPIO22", + "GPIO23", + "GPIO24", + "GPIO25", + "GPIO26", + "GPIO27", + "HDMI_HPD_N", + "STATUS_LED_G", + /* Used by BT module */ + "CTS0", + "RTS0", + "TXD0", + "RXD0", + /* Used by Wifi */ + "SD1_CLK", + "SD1_CMD", + "SD1_DATA0", + "SD1_DATA1", + "SD1_DATA2", + "SD1_DATA3", + "PWM0_OUT", + "PWM1_OUT", + "", /* GPIO42 */ + "WIFI_CLK", + "SDA0", + "SCL0", + "SMPS_SCL", + "SMPS_SDA", + /* Used by SD Card */ + "SD_CLK_R", + "SD_CMD_R", + "SD_DATA0_R", + "SD_DATA1_R", + "SD_DATA2_R", + "SD_DATA3_R"; +}; + +&hdmi { + hpd-gpios = <&gpio 28 GPIO_ACTIVE_LOW>; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio41>; + status = "okay"; +}; + +/* + * SDHCI is used to control the SDIO for wireless + * + * WL_REG_ON and BT_REG_ON of the CYW43455 Wifi/BT module are driven + * by a single GPIO. We can't give GPIO control to one of the drivers, + * otherwise the other part would get unexpectedly disturbed. + */ +&sdhci { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_gpio34>; + status = "okay"; + bus-width = <4>; + non-removable; + + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; +}; + +/* SDHOST is used to drive the SD card */ +&sdhost { + pinctrl-names = "default"; + pinctrl-0 = <&sdhost_gpio48>; + status = "okay"; + bus-width = <4>; +}; + +/* uart0 communicates with the BT module */ +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_ctsrts_gpio30 &uart0_gpio32 &gpclk2_gpio43>; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + max-speed = <2000000>; + }; +}; + +/* uart1 is mapped to the pin header */ +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_gpio14>; + status = "okay"; +}; diff --git a/dts/src/arm/bcm2837-rpi-3-b-plus.dts b/dts/src/arm/bcm2837-rpi-3-b-plus.dts index 42bb09044c..c6fa34c241 100644 --- a/dts/src/arm/bcm2837-rpi-3-b-plus.dts +++ b/dts/src/arm/bcm2837-rpi-3-b-plus.dts @@ -14,7 +14,7 @@ stdout-path = "serial1:115200n8"; }; - memory { + memory@0 { reg = <0 0x40000000>; }; @@ -42,7 +42,7 @@ #gpio-cells = <2>; gpio-line-names = "BT_ON", "WL_ON", - "STATUS_LED", + "STATUS_LED_R", "LAN_RUN", "", "CAM_GPIO0", @@ -52,6 +52,76 @@ }; }; +&gpio { + /* + * Taken from rpi_SCH_3bplus_1p0_reduced.pdf and + * the official GPU firmware DT blob. + * + * Legend: + * "NC" = not connected (no rail from the SoC) + * "FOO" = GPIO line named "FOO" on the schematic + * "FOO_N" = GPIO line named "FOO" on schematic, active low + */ + gpio-line-names = "ID_SDA", + "ID_SCL", + "SDA1", + "SCL1", + "GPIO_GCLK", + "GPIO5", + "GPIO6", + "SPI_CE1_N", + "SPI_CE0_N", + "SPI_MISO", + "SPI_MOSI", + "SPI_SCLK", + "GPIO12", + "GPIO13", + /* Serial port */ + "TXD1", + "RXD1", + "GPIO16", + "GPIO17", + "GPIO18", + "GPIO19", + "GPIO20", + "GPIO21", + "GPIO22", + "GPIO23", + "GPIO24", + "GPIO25", + "GPIO26", + "GPIO27", + "HDMI_HPD_N", + "STATUS_LED_G", + /* Used by BT module */ + "CTS0", + "RTS0", + "TXD0", + "RXD0", + /* Used by Wifi */ + "SD1_CLK", + "SD1_CMD", + "SD1_DATA0", + "SD1_DATA1", + "SD1_DATA2", + "SD1_DATA3", + "PWM0_OUT", + "PWM1_OUT", + "ETHCLK", + "WIFI_CLK", + "SDA0", + "SCL0", + "SMPS_SCL", + "SMPS_SDA", + /* Used by SD Card */ + "SD_CLK_R", + "SD_CMD_R", + "SD_DATA0_R", + "SD_DATA1_R", + "SD_DATA2_R", + "SD_DATA3_R"; +}; + &hdmi { hpd-gpios = <&gpio 28 GPIO_ACTIVE_LOW>; }; diff --git a/dts/src/arm/bcm2837-rpi-3-b.dts b/dts/src/arm/bcm2837-rpi-3-b.dts index 0c155dd4f3..ce71f578c5 100644 --- a/dts/src/arm/bcm2837-rpi-3-b.dts +++ b/dts/src/arm/bcm2837-rpi-3-b.dts @@ -14,7 +14,7 @@ stdout-path = "serial1:115200n8"; }; - memory { + memory@0 { reg = <0 0x40000000>; }; @@ -39,7 +39,7 @@ "WL_ON", "STATUS_LED", "LAN_RUN", - "HPD_N", + "HDMI_HPD_N", "CAM_GPIO0", "CAM_GPIO1", "PWR_LOW_N"; @@ -47,6 +47,76 @@ }; }; +&gpio { + /* + * Taken from rpi_SCH_3b_1p2_reduced.pdf and + * the official GPU firmware DT blob. + * + * Legend: + * "NC" = not connected (no rail from the SoC) + * "FOO" = GPIO line named "FOO" on the schematic + * "FOO_N" = GPIO line named "FOO" on schematic, active low + */ + gpio-line-names = "ID_SDA", + "ID_SCL", + "SDA1", + "SCL1", + "GPIO_GCLK", + "GPIO5", + "GPIO6", + "SPI_CE1_N", + "SPI_CE0_N", + "SPI_MISO", + "SPI_MOSI", + "SPI_SCLK", + "GPIO12", + "GPIO13", + /* Serial port */ + "TXD1", + "RXD1", + "GPIO16", + "GPIO17", + "GPIO18", + "GPIO19", + "GPIO20", + "GPIO21", + "GPIO22", + "GPIO23", + "GPIO24", + "GPIO25", + "GPIO26", + "GPIO27", + "", /* GPIO 28 */ + "LAN_RUN_BOOT", + /* Used by BT module */ + "CTS0", + "RTS0", + "TXD0", + "RXD0", + /* Used by Wifi */ + "SD1_CLK", + "SD1_CMD", + "SD1_DATA0", + "SD1_DATA1", + "SD1_DATA2", + "SD1_DATA3", + "PWM0_OUT", + "PWM1_OUT", + "ETHCLK", + "WIFI_CLK", + "SDA0", + "SCL0", + "SMPS_SCL", + "SMPS_SDA", + /* Used by SD Card */ + "SD_CLK_R", + "SD_CMD_R", + "SD_DATA0_R", + "SD_DATA1_R", + "SD_DATA2_R", + "SD_DATA3_R"; +}; + &pwm { pinctrl-names = "default"; pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio41>; diff --git a/dts/src/arm/bcm2837-rpi-cm3.dtsi b/dts/src/arm/bcm2837-rpi-cm3.dtsi index 4a89a1885a..81399b2c5a 100644 --- a/dts/src/arm/bcm2837-rpi-cm3.dtsi +++ b/dts/src/arm/bcm2837-rpi-cm3.dtsi @@ -4,7 +4,7 @@ #include "bcm2836-rpi.dtsi" / { - memory { + memory@0 { reg = <0 0x40000000>; }; diff --git a/dts/src/arm/bcm283x.dtsi b/dts/src/arm/bcm283x.dtsi index 31b29646b1..9777644c6c 100644 --- a/dts/src/arm/bcm283x.dtsi +++ b/dts/src/arm/bcm283x.dtsi @@ -3,6 +3,7 @@ #include <dt-bindings/clock/bcm2835-aux.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/soc/bcm2835-pm.h> /* firmware-provided startup stubs live here, where the secondary CPUs are * spinning. @@ -120,9 +121,18 @@ #interrupt-cells = <2>; }; - watchdog@7e100000 { - compatible = "brcm,bcm2835-pm-wdt"; - reg = <0x7e100000 0x28>; + pm: watchdog@7e100000 { + compatible = "brcm,bcm2835-pm", "brcm,bcm2835-pm-wdt"; + #power-domain-cells = <1>; + #reset-cells = <1>; + reg = <0x7e100000 0x114>, + <0x7e00a000 0x24>; + clocks = <&clocks BCM2835_CLOCK_V3D>, + <&clocks BCM2835_CLOCK_PERI_IMAGE>, + <&clocks BCM2835_CLOCK_H264>, + <&clocks BCM2835_CLOCK_ISP>; + clock-names = "v3d", "peri_image", "h264", "isp"; + system-power-controller; }; clocks: cprman@7e101000 { @@ -629,6 +639,7 @@ compatible = "brcm,bcm2835-v3d"; reg = <0x7ec00000 0x1000>; interrupts = <1 10>; + power-domains = <&pm BCM2835_POWER_DOMAIN_GRAFX_V3D>; }; vc4: gpu { diff --git a/dts/src/arm/bcm47081-asus-rt-n18u.dts b/dts/src/arm/bcm47081-asus-rt-n18u.dts index 76a2bab3bc..fe842f2f1c 100644 --- a/dts/src/arm/bcm47081-asus-rt-n18u.dts +++ b/dts/src/arm/bcm47081-asus-rt-n18u.dts @@ -20,6 +20,7 @@ }; memory { + device_type = "memory"; reg = <0x00000000 0x08000000 0x88000000 0x08000000>; }; diff --git a/dts/src/arm/bcm47081-buffalo-wzr-600dhp2.dts b/dts/src/arm/bcm47081-buffalo-wzr-600dhp2.dts index 69e3570e03..6fcbb0509b 100644 --- a/dts/src/arm/bcm47081-buffalo-wzr-600dhp2.dts +++ b/dts/src/arm/bcm47081-buffalo-wzr-600dhp2.dts @@ -20,6 +20,7 @@ }; memory { + device_type = "memory"; reg = <0x00000000 0x08000000 0x88000000 0x08000000>; }; diff --git a/dts/src/arm/bcm47081-buffalo-wzr-900dhp.dts b/dts/src/arm/bcm47081-buffalo-wzr-900dhp.dts index 0f6f0fe13b..b3e8cc90b1 100644 --- a/dts/src/arm/bcm47081-buffalo-wzr-900dhp.dts +++ b/dts/src/arm/bcm47081-buffalo-wzr-900dhp.dts @@ -20,6 +20,7 @@ }; memory { + device_type = "memory"; reg = <0x00000000 0x08000000 0x88000000 0x08000000>; }; diff --git a/dts/src/arm/bcm47081-luxul-xap-1410.dts b/dts/src/arm/bcm47081-luxul-xap-1410.dts index f770897449..fdeaa89551 100644 --- a/dts/src/arm/bcm47081-luxul-xap-1410.dts +++ b/dts/src/arm/bcm47081-luxul-xap-1410.dts @@ -16,6 +16,7 @@ }; memory { + device_type = "memory"; reg = <0x00000000 0x08000000>; }; diff --git a/dts/src/arm/bcm47081-luxul-xwr-1200.dts b/dts/src/arm/bcm47081-luxul-xwr-1200.dts index 4d42786375..0d510cb15e 100644 --- a/dts/src/arm/bcm47081-luxul-xwr-1200.dts +++ b/dts/src/arm/bcm47081-luxul-xwr-1200.dts @@ -17,6 +17,7 @@ }; memory { + device_type = "memory"; reg = <0x00000000 0x08000000>; }; diff --git a/dts/src/arm/bcm47081-tplink-archer-c5-v2.dts b/dts/src/arm/bcm47081-tplink-archer-c5-v2.dts index 189cc3dcd6..962e89edba 100644 --- a/dts/src/arm/bcm47081-tplink-archer-c5-v2.dts +++ b/dts/src/arm/bcm47081-tplink-archer-c5-v2.dts @@ -16,6 +16,7 @@ }; memory { + device_type = "memory"; reg = <0x00000000 0x08000000>; }; diff --git a/dts/src/arm/bcm47094-dlink-dir-885l.dts b/dts/src/arm/bcm47094-dlink-dir-885l.dts index 03c1ab1885..658a56ff8a 100644 --- a/dts/src/arm/bcm47094-dlink-dir-885l.dts +++ b/dts/src/arm/bcm47094-dlink-dir-885l.dts @@ -20,6 +20,7 @@ }; memory { + device_type = "memory"; reg = <0x00000000 0x08000000 0x88000000 0x08000000>; }; diff --git a/dts/src/arm/bcm47094-linksys-panamera.dts b/dts/src/arm/bcm47094-linksys-panamera.dts index 36efe410dc..5fd47eec44 100644 --- a/dts/src/arm/bcm47094-linksys-panamera.dts +++ b/dts/src/arm/bcm47094-linksys-panamera.dts @@ -17,6 +17,7 @@ }; memory { + device_type = "memory"; reg = <0x00000000 0x08000000 0x88000000 0x08000000>; }; diff --git a/dts/src/arm/bcm47094-luxul-abr-4500.dts b/dts/src/arm/bcm47094-luxul-abr-4500.dts index 3e5e9972cd..6604be6ff0 100644 --- a/dts/src/arm/bcm47094-luxul-abr-4500.dts +++ b/dts/src/arm/bcm47094-luxul-abr-4500.dts @@ -17,6 +17,7 @@ }; memory { + device_type = "memory"; reg = <0x00000000 0x08000000 0x88000000 0x18000000>; }; diff --git a/dts/src/arm/bcm47094-luxul-xap-1610.dts b/dts/src/arm/bcm47094-luxul-xap-1610.dts index 7fd8547589..567ebbd5a0 100644 --- a/dts/src/arm/bcm47094-luxul-xap-1610.dts +++ b/dts/src/arm/bcm47094-luxul-xap-1610.dts @@ -16,6 +16,7 @@ }; memory { + device_type = "memory"; reg = <0x00000000 0x08000000>; }; diff --git a/dts/src/arm/bcm47094-luxul-xbr-4500.dts b/dts/src/arm/bcm47094-luxul-xbr-4500.dts index 7acbecd429..ac2d136ed3 100644 --- a/dts/src/arm/bcm47094-luxul-xbr-4500.dts +++ b/dts/src/arm/bcm47094-luxul-xbr-4500.dts @@ -17,6 +17,7 @@ }; memory { + device_type = "memory"; reg = <0x00000000 0x08000000 0x88000000 0x18000000>; }; diff --git a/dts/src/arm/bcm47094-luxul-xwr-3100.dts b/dts/src/arm/bcm47094-luxul-xwr-3100.dts index f4558d9d27..74371e821b 100644 --- a/dts/src/arm/bcm47094-luxul-xwr-3100.dts +++ b/dts/src/arm/bcm47094-luxul-xwr-3100.dts @@ -17,6 +17,7 @@ }; memory { + device_type = "memory"; reg = <0x00000000 0x08000000 0x88000000 0x08000000>; }; diff --git a/dts/src/arm/bcm47094-luxul-xwr-3150-v1.dts b/dts/src/arm/bcm47094-luxul-xwr-3150-v1.dts index bdad726725..b44af63ee3 100644 --- a/dts/src/arm/bcm47094-luxul-xwr-3150-v1.dts +++ b/dts/src/arm/bcm47094-luxul-xwr-3150-v1.dts @@ -17,6 +17,7 @@ }; memory { + device_type = "memory"; reg = <0x00000000 0x08000000 0x88000000 0x18000000>; }; diff --git a/dts/src/arm/bcm47094-netgear-r8500.dts b/dts/src/arm/bcm47094-netgear-r8500.dts index 30719380b6..eebc0d43e2 100644 --- a/dts/src/arm/bcm47094-netgear-r8500.dts +++ b/dts/src/arm/bcm47094-netgear-r8500.dts @@ -17,6 +17,7 @@ }; memory { + device_type = "memory"; reg = <0x00000000 0x08000000 0x88000000 0x18000000>; }; diff --git a/dts/src/arm/bcm47094-phicomm-k3.dts b/dts/src/arm/bcm47094-phicomm-k3.dts new file mode 100644 index 0000000000..ec09c0426d --- /dev/null +++ b/dts/src/arm/bcm47094-phicomm-k3.dts @@ -0,0 +1,71 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (C) 2017 Hamster Tian <haotia@gmail.com> + * Copyright (C) 2019 Hao Dong <halbertdong@gmail.com> + */ + +/dts-v1/; + +#include "bcm47094.dtsi" +#include "bcm5301x-nand-cs0-bch4.dtsi" + +/ { + compatible = "phicomm,k3", "brcm,bcm47094", "brcm,bcm4708"; + model = "Phicomm K3"; + + memory { + reg = <0x00000000 0x08000000 + 0x88000000 0x18000000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&uart1 { + status = "okay"; +}; + +&usb3_phy { + status = "okay"; +}; + +&nandcs { + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "boot"; + reg = <0x0000000 0x0080000>; + read-only; + }; + + partition@80000 { + label = "nvram"; + reg = <0x0080000 0x0100000>; + }; + + partition@180000{ + label = "phicomm"; + reg = <0x0180000 0x0280000>; + read-only; + }; + + partition@400000 { + label = "firmware"; + reg = <0x0400000 0x7C00000>; + compatible = "brcm,trx"; + }; + }; +}; diff --git a/dts/src/arm/bcm47189-luxul-xap-1440.dts b/dts/src/arm/bcm47189-luxul-xap-1440.dts index 74c83b0ca5..eb59508578 100644 --- a/dts/src/arm/bcm47189-luxul-xap-1440.dts +++ b/dts/src/arm/bcm47189-luxul-xap-1440.dts @@ -1,7 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* * Copyright 2017 Luxul Inc. - * - * Licensed under the ISC license. */ /dts-v1/; @@ -17,6 +16,7 @@ }; memory { + device_type = "memory"; reg = <0x00000000 0x08000000>; }; diff --git a/dts/src/arm/bcm47189-luxul-xap-810.dts b/dts/src/arm/bcm47189-luxul-xap-810.dts index 214df18f3a..4c71f5e95e 100644 --- a/dts/src/arm/bcm47189-luxul-xap-810.dts +++ b/dts/src/arm/bcm47189-luxul-xap-810.dts @@ -1,7 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* * Copyright 2017 Luxul Inc. - * - * Licensed under the ISC license. */ /dts-v1/; @@ -17,6 +16,7 @@ }; memory { + device_type = "memory"; reg = <0x00000000 0x08000000>; }; diff --git a/dts/src/arm/bcm47189-tenda-ac9.dts b/dts/src/arm/bcm47189-tenda-ac9.dts index e15e2a1e9d..5ad53ea52d 100644 --- a/dts/src/arm/bcm47189-tenda-ac9.dts +++ b/dts/src/arm/bcm47189-tenda-ac9.dts @@ -16,6 +16,7 @@ }; memory { + device_type = "memory"; reg = <0x00000000 0x08000000>; }; diff --git a/dts/src/arm/bcm5301x.dtsi b/dts/src/arm/bcm5301x.dtsi index fd7af943fb..ac5266ee8d 100644 --- a/dts/src/arm/bcm5301x.dtsi +++ b/dts/src/arm/bcm5301x.dtsi @@ -13,9 +13,10 @@ #include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> -#include "skeleton.dtsi" / { + #address-cells = <1>; + #size-cells = <1>; interrupt-parent = <&gic>; chipcommonA { diff --git a/dts/src/arm/bcm53340-ubnt-unifi-switch8.dts b/dts/src/arm/bcm53340-ubnt-unifi-switch8.dts index 431cda5142..2e7fda9b99 100644 --- a/dts/src/arm/bcm53340-ubnt-unifi-switch8.dts +++ b/dts/src/arm/bcm53340-ubnt-unifi-switch8.dts @@ -20,6 +20,7 @@ }; memory@0 { + device_type = "memory"; reg = <0x00000000 0x08000000>, <0x68000000 0x08000000>; }; diff --git a/dts/src/arm/bcm53573.dtsi b/dts/src/arm/bcm53573.dtsi index 5054fa9eb0..b29695bd48 100644 --- a/dts/src/arm/bcm53573.dtsi +++ b/dts/src/arm/bcm53573.dtsi @@ -7,9 +7,10 @@ #include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> -#include "skeleton.dtsi" / { + #address-cells = <1>; + #size-cells = <1>; interrupt-parent = <&gic>; aliases { diff --git a/dts/src/arm/bcm63138.dtsi b/dts/src/arm/bcm63138.dtsi index f59764008b..e6a41e1b27 100644 --- a/dts/src/arm/bcm63138.dtsi +++ b/dts/src/arm/bcm63138.dtsi @@ -6,9 +6,9 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/irq.h> -#include "skeleton.dtsi" - / { + #address-cells = <1>; + #size-cells = <1>; compatible = "brcm,bcm63138"; model = "Broadcom BCM63138 DSL SoC"; interrupt-parent = <&gic>; diff --git a/dts/src/arm/bcm7445.dtsi b/dts/src/arm/bcm7445.dtsi index c859aa6f35..504a63236a 100644 --- a/dts/src/arm/bcm7445.dtsi +++ b/dts/src/arm/bcm7445.dtsi @@ -1,8 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 #include <dt-bindings/interrupt-controller/arm-gic.h> -#include "skeleton.dtsi" - / { #address-cells = <2>; #size-cells = <2>; diff --git a/dts/src/arm/bcm947189acdbmr.dts b/dts/src/arm/bcm947189acdbmr.dts index ef263412fe..4991700ae6 100644 --- a/dts/src/arm/bcm947189acdbmr.dts +++ b/dts/src/arm/bcm947189acdbmr.dts @@ -18,6 +18,7 @@ }; memory { + device_type = "memory"; reg = <0x00000000 0x08000000>; }; diff --git a/dts/src/arm/bcm953012er.dts b/dts/src/arm/bcm953012er.dts index 17f63c7a04..250a1d6f2d 100644 --- a/dts/src/arm/bcm953012er.dts +++ b/dts/src/arm/bcm953012er.dts @@ -40,6 +40,7 @@ compatible = "brcm,bcm953012er", "brcm,brcm53012", "brcm,bcm4708"; memory { + device_type = "memory"; reg = <0x00000000 0x8000000>; }; diff --git a/dts/src/arm/bcm953012hr.dts b/dts/src/arm/bcm953012hr.dts index 11b0f5ed99..9140be7ec0 100644 --- a/dts/src/arm/bcm953012hr.dts +++ b/dts/src/arm/bcm953012hr.dts @@ -46,6 +46,7 @@ }; memory@80000000 { + device_type = "memory"; reg = <0x80000000 0x10000000>; }; }; diff --git a/dts/src/arm/bcm953012k.dts b/dts/src/arm/bcm953012k.dts index e798055d69..52c4c6c9d3 100644 --- a/dts/src/arm/bcm953012k.dts +++ b/dts/src/arm/bcm953012k.dts @@ -44,6 +44,7 @@ }; memory { + device_type = "memory"; reg = <0x80000000 0x10000000>; }; }; diff --git a/dts/src/arm/cx92755.dtsi b/dts/src/arm/cx92755.dtsi index a5a23c3764..d2e8f36f8c 100644 --- a/dts/src/arm/cx92755.dtsi +++ b/dts/src/arm/cx92755.dtsi @@ -44,9 +44,9 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -#include "skeleton.dtsi" - / { + #address-cells = <1>; + #size-cells = <1>; compatible = "cnxt,cx92755"; interrupt-parent = <&intc>; diff --git a/dts/src/arm/da850-lcdk.dts b/dts/src/arm/da850-lcdk.dts index 3a2fa6e035..26f453dc83 100644 --- a/dts/src/arm/da850-lcdk.dts +++ b/dts/src/arm/da850-lcdk.dts @@ -74,12 +74,16 @@ simple-audio-card,name = "DA850-OMAPL138 LCDK"; simple-audio-card,widgets = "Line", "Line In", - "Line", "Line Out"; + "Line", "Line Out", + "Microphone", "Mic Jack"; simple-audio-card,routing = "LINE1L", "Line In", "LINE1R", "Line In", "Line Out", "LLOUT", - "Line Out", "RLOUT"; + "Line Out", "RLOUT", + "MIC3L", "Mic Jack", + "MIC3R", "Mic Jack", + "Mic Jack", "Mic Bias"; simple-audio-card,format = "dsp_b"; simple-audio-card,bitclock-master = <&link0_codec>; simple-audio-card,frame-master = <&link0_codec>; @@ -250,6 +254,8 @@ #sound-dai-cells = <0>; compatible = "ti,tlv320aic3106"; reg = <0x18>; + adc-settle-ms = <40>; + ai3x-micbias-vg = <1>; /* 2.0V */ status = "okay"; /* Regulators */ diff --git a/dts/src/arm/dm814x.dtsi b/dts/src/arm/dm814x.dtsi index 601c57afd4..95de9f214c 100644 --- a/dts/src/arm/dm814x.dtsi +++ b/dts/src/arm/dm814x.dtsi @@ -222,6 +222,30 @@ #interrupt-cells = <2>; }; + gpio3: gpio@1ac000 { + compatible = "ti,omap4-gpio"; + ti,hwmods = "gpio3"; + ti,gpio-always-on; + reg = <0x1ac000 0x2000>; + interrupts = <32>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio4: gpio@1ae000 { + compatible = "ti,omap4-gpio"; + ti,hwmods = "gpio4"; + ti,gpio-always-on; + reg = <0x1ae000 0x2000>; + interrupts = <62>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + i2c2: i2c@2a000 { compatible = "ti,omap4-i2c"; #address-cells = <1>; @@ -240,10 +264,48 @@ ti,spi-num-cs = <4>; ti,hwmods = "mcspi1"; dmas = <&edma 16 0 &edma 17 0 - &edma 18 0 &edma 19 0>; + &edma 18 0 &edma 19 0 + &edma 20 0 &edma 21 0 + &edma 22 0 &edma 23 0>; + + dma-names = "tx0", "rx0", "tx1", "rx1", + "tx2", "rx2", "tx3", "rx3"; + }; + + mcspi2: spi@1a0000 { + compatible = "ti,omap4-mcspi"; + reg = <0x1a0000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <125>; + ti,spi-num-cs = <4>; + ti,hwmods = "mcspi2"; + dmas = <&edma 42 0 &edma 43 0 + &edma 44 0 &edma 45 0>; dma-names = "tx0", "rx0", "tx1", "rx1"; }; + /* Board must configure dmas with edma_xbar for EDMA */ + mcspi3: spi@1a2000 { + compatible = "ti,omap4-mcspi"; + reg = <0x1a2000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <126>; + ti,spi-num-cs = <4>; + ti,hwmods = "mcspi3"; + }; + + mcspi4: spi@1a4000 { + compatible = "ti,omap4-mcspi"; + reg = <0x1a4000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <127>; + ti,spi-num-cs = <4>; + ti,hwmods = "mcspi4"; + }; + timer1: timer@2e000 { compatible = "ti,dm814-timer"; reg = <0x2e000 0x2000>; @@ -343,6 +405,12 @@ #size-cells = <1>; ranges = <0 0 0x800>; + phy_gmii_sel: phy-gmii-sel { + compatible = "ti,dm814-phy-gmii-sel"; + reg = <0x650 0x4>; + #phy-cells = <1>; + }; + scm_clocks: clocks { #address-cells = <1>; #size-cells = <0>; @@ -549,17 +617,14 @@ cpsw_emac0: slave@4a100200 { /* Filled in by U-Boot */ mac-address = [ 00 00 00 00 00 00 ]; + phys = <&phy_gmii_sel 1>; + }; cpsw_emac1: slave@4a100300 { /* Filled in by U-Boot */ mac-address = [ 00 00 00 00 00 00 ]; - }; - - phy_sel: cpsw-phy-sel@48140650 { - compatible = "ti,am3352-cpsw-phy-sel"; - reg= <0x48140650 0x4>; - reg-names = "gmii-sel"; + phys = <&phy_gmii_sel 2>; }; }; diff --git a/dts/src/arm/dove.dtsi b/dts/src/arm/dove.dtsi index 250ad0535e..2e8a397721 100644 --- a/dts/src/arm/dove.dtsi +++ b/dts/src/arm/dove.dtsi @@ -1,12 +1,12 @@ // SPDX-License-Identifier: GPL-2.0 -/include/ "skeleton.dtsi" - #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> #define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16)) / { + #address-cells = <1>; + #size-cells = <1>; compatible = "marvell,dove"; model = "Marvell Armada 88AP510 SoC"; interrupt-parent = <&intc>; diff --git a/dts/src/arm/dra7-l4.dtsi b/dts/src/arm/dra7-l4.dtsi index bb45cb7fc3..414f1cd687 100644 --- a/dts/src/arm/dra7-l4.dtsi +++ b/dts/src/arm/dra7-l4.dtsi @@ -77,18 +77,18 @@ }; }; + phy_gmii_sel: phy-gmii-sel { + compatible = "ti,dra7xx-phy-gmii-sel"; + reg = <0x554 0x4>; + #phy-cells = <1>; + }; + scm_conf_clocks: clocks { #address-cells = <1>; #size-cells = <0>; }; }; - phy_sel: cpsw-phy-sel@554 { - compatible = "ti,dra7xx-cpsw-phy-sel"; - reg= <0x554 0x4>; - reg-names = "gmii-sel"; - }; - dra7_pmx_core: pinmux@1400 { compatible = "ti,dra7-padconf", "pinctrl-single"; @@ -3099,7 +3099,6 @@ <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>; ranges = <0 0 0x4000>; syscon = <&scm_conf>; - cpsw-phy-sel = <&phy_sel>; status = "disabled"; davinci_mdio: mdio@1000 { @@ -3114,11 +3113,13 @@ cpsw_emac0: slave@200 { /* Filled in by U-Boot */ mac-address = [ 00 00 00 00 00 00 ]; + phys = <&phy_gmii_sel 1>; }; cpsw_emac1: slave@300 { /* Filled in by U-Boot */ mac-address = [ 00 00 00 00 00 00 ]; + phys = <&phy_gmii_sel 2>; }; }; }; diff --git a/dts/src/arm/ep7209.dtsi b/dts/src/arm/ep7209.dtsi index aaf1261d2e..0e74222a5e 100644 --- a/dts/src/arm/ep7209.dtsi +++ b/dts/src/arm/ep7209.dtsi @@ -6,11 +6,11 @@ /dts-v1/; -#include "skeleton.dtsi" - #include <dt-bindings/clock/clps711x-clock.h> / { + #address-cells = <1>; + #size-cells = <1>; model = "Cirrus Logic EP7209"; compatible = "cirrus,ep7209"; diff --git a/dts/src/arm/ep7211-edb7211.dts b/dts/src/arm/ep7211-edb7211.dts index bc9d5b6974..3475c7777c 100644 --- a/dts/src/arm/ep7211-edb7211.dts +++ b/dts/src/arm/ep7211-edb7211.dts @@ -12,6 +12,7 @@ compatible = "cirrus,edb7211", "cirrus,ep7211", "cirrus,ep7209"; memory { + device_type = "memory"; reg = <0xc0000000 0x02000000>; }; diff --git a/dts/src/arm/exynos3250.dtsi b/dts/src/arm/exynos3250.dtsi index 608d174541..5892a9f762 100644 --- a/dts/src/arm/exynos3250.dtsi +++ b/dts/src/arm/exynos3250.dtsi @@ -168,6 +168,9 @@ interrupt-controller; #interrupt-cells = <3>; interrupt-parent = <&gic>; + clock-names = "clkout8"; + clocks = <&cmu CLK_FIN_PLL>; + #clock-cells = <1>; }; mipi_phy: video-phy { diff --git a/dts/src/arm/exynos4412-odroid-common.dtsi b/dts/src/arm/exynos4412-odroid-common.dtsi index 3a9eb1e91c..08d3a0a7b4 100644 --- a/dts/src/arm/exynos4412-odroid-common.dtsi +++ b/dts/src/arm/exynos4412-odroid-common.dtsi @@ -49,7 +49,7 @@ }; emmc_pwrseq: pwrseq { - pinctrl-0 = <&sd1_cd>; + pinctrl-0 = <&emmc_rstn>; pinctrl-names = "default"; compatible = "mmc-pwrseq-emmc"; reset-gpios = <&gpk1 2 GPIO_ACTIVE_LOW>; @@ -165,12 +165,6 @@ cpu0-supply = <&buck2_reg>; }; -/* RSTN signal for eMMC */ -&sd1_cd { - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; -}; - &pinctrl_1 { gpio_power_key: power_key { samsung,pins = "gpx1-3"; @@ -188,6 +182,11 @@ samsung,pins = "gpx3-7"; samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; }; + + emmc_rstn: emmc-rstn { + samsung,pins = "gpk1-2"; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; }; &ehci { @@ -390,7 +389,6 @@ regulator-name = "LDO20_1.8V"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - regulator-boot-on; }; ldo21_reg: LDO21 { diff --git a/dts/src/arm/exynos4412-odroidx.dts b/dts/src/arm/exynos4412-odroidx.dts index 348556fcdd..a2251581f6 100644 --- a/dts/src/arm/exynos4412-odroidx.dts +++ b/dts/src/arm/exynos4412-odroidx.dts @@ -53,7 +53,7 @@ regulator-name = "p3v3_en"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpio = <&gpa1 1 GPIO_ACTIVE_LOW>; + gpio = <&gpa1 1 GPIO_ACTIVE_HIGH>; enable-active-high; regulator-always-on; }; diff --git a/dts/src/arm/exynos5250-arndale.dts b/dts/src/arm/exynos5250-arndale.dts index 2ca9319f48..dc6fa6fe83 100644 --- a/dts/src/arm/exynos5250-arndale.dts +++ b/dts/src/arm/exynos5250-arndale.dts @@ -23,7 +23,7 @@ }; chosen { - bootargs = "console=ttySAC2,115200"; + stdout-path = "serial2:115200n8"; }; gpio_keys { @@ -100,7 +100,7 @@ regulator-name = "VDD_33ON_2.8V"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; - gpio = <&gpx1 1 GPIO_ACTIVE_LOW>; + gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>; enable-active-high; }; diff --git a/dts/src/arm/exynos5422-odroid-core.dtsi b/dts/src/arm/exynos5422-odroid-core.dtsi index bf09eab90f..25d95de15c 100644 --- a/dts/src/arm/exynos5422-odroid-core.dtsi +++ b/dts/src/arm/exynos5422-odroid-core.dtsi @@ -36,6 +36,11 @@ }; }; +&adc { + vdd-supply = <&ldo4_reg>; + status = "okay"; +}; + &bus_wcore { devfreq-events = <&nocp_mem0_0>, <&nocp_mem0_1>, <&nocp_mem1_0>, <&nocp_mem1_1>; @@ -468,7 +473,7 @@ buck8_reg: BUCK8 { regulator-name = "vdd_1.8v_ldo"; regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1500000>; + regulator-max-microvolt = <2000000>; regulator-always-on; regulator-boot-on; }; diff --git a/dts/src/arm/exynos5422-odroidxu3-audio.dtsi b/dts/src/arm/exynos5422-odroidxu3-audio.dtsi index e84544b220..51a843bd65 100644 --- a/dts/src/arm/exynos5422-odroidxu3-audio.dtsi +++ b/dts/src/arm/exynos5422-odroidxu3-audio.dtsi @@ -24,7 +24,9 @@ "Headphone Jack", "MICBIAS", "IN1", "Headphone Jack", "Speakers", "SPKL", - "Speakers", "SPKR"; + "Speakers", "SPKR", + "I2S Playback", "Mixer DAI TX", + "HiFi Playback", "Mixer DAI TX"; assigned-clocks = <&clock CLK_MOUT_EPLL>, <&clock CLK_MOUT_MAU_EPLL>, @@ -51,7 +53,7 @@ <196608000>; cpu { - sound-dai = <&i2s0 0>; + sound-dai = <&i2s0 0>, <&i2s0 1>; }; codec { sound-dai = <&hdmi>, <&max98090>; diff --git a/dts/src/arm/exynos5422-odroidxu3-common.dtsi b/dts/src/arm/exynos5422-odroidxu3-common.dtsi index b299e541ca..5f195ad7e4 100644 --- a/dts/src/arm/exynos5422-odroidxu3-common.dtsi +++ b/dts/src/arm/exynos5422-odroidxu3-common.dtsi @@ -362,11 +362,6 @@ }; }; -&adc { - vdd-supply = <&ldo4_reg>; - status = "okay"; -}; - &hdmi { status = "okay"; ddc = <&i2c_2>; diff --git a/dts/src/arm/exynos5422-odroidxu3-lite.dts b/dts/src/arm/exynos5422-odroidxu3-lite.dts index 0db935f2b8..c19b5a51ca 100644 --- a/dts/src/arm/exynos5422-odroidxu3-lite.dts +++ b/dts/src/arm/exynos5422-odroidxu3-lite.dts @@ -18,6 +18,14 @@ compatible = "hardkernel,odroid-xu3-lite", "samsung,exynos5800", "samsung,exynos5"; }; +&arm_a7_pmu { + status = "disabled"; +}; + +&arm_a15_pmu { + status = "disabled"; +}; + &pwm { /* * PWM 0 -- fan diff --git a/dts/src/arm/exynos5422-odroidxu4.dts b/dts/src/arm/exynos5422-odroidxu4.dts index 122174ea9e..892d389d6d 100644 --- a/dts/src/arm/exynos5422-odroidxu4.dts +++ b/dts/src/arm/exynos5422-odroidxu4.dts @@ -33,6 +33,8 @@ compatible = "samsung,odroid-xu3-audio"; model = "Odroid-XU4"; + samsung,audio-routing = "I2S Playback", "Mixer DAI TX"; + assigned-clocks = <&clock CLK_MOUT_EPLL>, <&clock CLK_MOUT_MAU_EPLL>, <&clock CLK_MOUT_USER_MAU_EPLL>, @@ -58,7 +60,7 @@ <196608000>; cpu { - sound-dai = <&i2s0 0>; + sound-dai = <&i2s0 0>, <&i2s0 1>; }; codec { diff --git a/dts/src/arm/imx27.dtsi b/dts/src/arm/imx27.dtsi index 26ff5d419b..3652f5556b 100644 --- a/dts/src/arm/imx27.dtsi +++ b/dts/src/arm/imx27.dtsi @@ -40,7 +40,7 @@ spi2 = &cspi3; }; - aitc: aitc-interrupt-controller@e0000000 { + aitc: aitc-interrupt-controller@10040000 { compatible = "fsl,imx27-aitc", "fsl,avic"; interrupt-controller; #interrupt-cells = <1>; diff --git a/dts/src/arm/imx28-cfa10036.dts b/dts/src/arm/imx28-cfa10036.dts index d3e3622979..de48b5808e 100644 --- a/dts/src/arm/imx28-cfa10036.dts +++ b/dts/src/arm/imx28-cfa10036.dts @@ -11,6 +11,7 @@ /dts-v1/; #include "imx28.dtsi" +#include <dt-bindings/gpio/gpio.h> / { model = "Crystalfontz CFA-10036 Board"; @@ -96,7 +97,7 @@ pinctrl-names = "default"; pinctrl-0 = <&ssd1306_cfa10036>; reg = <0x3c>; - reset-gpios = <&gpio2 7 0>; + reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>; solomon,height = <32>; solomon,width = <128>; solomon,page-offset = <0>; diff --git a/dts/src/arm/imx51-digi-connectcore-jsk.dts b/dts/src/arm/imx51-digi-connectcore-jsk.dts index 2967a748d8..a2eea58510 100644 --- a/dts/src/arm/imx51-digi-connectcore-jsk.dts +++ b/dts/src/arm/imx51-digi-connectcore-jsk.dts @@ -21,12 +21,28 @@ }; }; +&esdhc1 { + status = "okay"; +}; + &owire { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_owire>; status = "okay"; }; +&pmic { + fsl,mc13xxx-uses-rtc; + + regulators { + vcoincell_reg: vcoincell { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + }; +}; + &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; diff --git a/dts/src/arm/imx51-digi-connectcore-som.dtsi b/dts/src/arm/imx51-digi-connectcore-som.dtsi index 82d8df097e..d90ba5fe4f 100644 --- a/dts/src/arm/imx51-digi-connectcore-som.dtsi +++ b/dts/src/arm/imx51-digi-connectcore-som.dtsi @@ -37,7 +37,6 @@ reg = <0>; interrupt-parent = <&gpio1>; interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; - fsl,mc13xxx-uses-rtc; regulators { sw1_reg: sw1 { @@ -142,16 +141,17 @@ pwgt2spi_reg: pwgt2spi { regulator-always-on; }; - - vcoincell_reg: vcoincell { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-always-on; - }; }; }; }; +&esdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1>; + max-frequency = <50000000>; + bus-width = <1>; +}; + &esdhc2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc2>; @@ -174,9 +174,12 @@ }; &i2c2 { - pinctrl-names = "default"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c2>; + pinctrl-1 = <&pinctrl_i2c2_gpio>; clock-frequency = <400000>; + scl-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>; status = "okay"; mma7455l@1d { @@ -241,6 +244,14 @@ >; }; + pinctrl_esdhc1: esdhc1grp { + fsl,pins = < + MX51_PAD_SD1_CLK__SD1_CLK 0x400021d5 + MX51_PAD_SD1_CMD__SD1_CMD 0x400020d5 + MX51_PAD_SD1_DATA0__SD1_DATA0 0x400020d5 + >; + }; + pinctrl_esdhc2: esdhc2grp { fsl,pins = < MX51_PAD_SD2_CMD__SD2_CMD 0x400020d5 @@ -282,6 +293,13 @@ >; }; + pinctrl_i2c2_gpio: i2c2gpiogrp { + fsl,pins = < + MX51_PAD_GPIO1_2__GPIO1_2 0x400001ed + MX51_PAD_GPIO1_3__GPIO1_3 0x400001ed + >; + }; + pinctrl_nfc: nfcgrp { fsl,pins = < MX51_PAD_NANDF_D0__NANDF_D0 0x80000000 diff --git a/dts/src/arm/imx6-logicpd-baseboard.dtsi b/dts/src/arm/imx6-logicpd-baseboard.dtsi new file mode 100644 index 0000000000..fb01fa6e42 --- /dev/null +++ b/dts/src/arm/imx6-logicpd-baseboard.dtsi @@ -0,0 +1,555 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (C) 2019 Logic PD, Inc. + +/ { + keyboard { + compatible = "gpio-keys"; + + btn0 { + gpios = <&pcf8575 0 GPIO_ACTIVE_LOW>; + label = "btn0"; + linux,code = <KEY_WAKEUP>; + debounce-interval = <10>; + wakeup-source; + }; + + btn1 { + gpios = <&pcf8575 1 GPIO_ACTIVE_LOW>; + label = "btn1"; + linux,code = <KEY_WAKEUP>; + debounce-interval = <10>; + wakeup-source; + }; + + btn2 { + gpios = <&pcf8575 2 GPIO_ACTIVE_LOW>; + label = "btn2"; + linux,code = <KEY_WAKEUP>; + debounce-interval = <10>; + wakeup-source; + }; + + btn3 { + gpios = <&pcf8575 3 GPIO_ACTIVE_LOW>; + label = "btn3"; + linux,code = <KEY_WAKEUP>; + debounce-interval = <10>; + wakeup-source; + }; + + }; + + leds { + compatible = "gpio-leds"; + + gen-led0 { + label = "led0"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_led0>; + gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "cpu0"; + }; + + gen-led1 { + label = "led1"; + gpios = <&pcf8575 8 GPIO_ACTIVE_HIGH>; + }; + + gen-led2 { + label = "led2"; + gpios = <&pcf8575 9 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + + gen-led3 { + label = "led3"; + gpios = <&pcf8575 10 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + }; + + reg_usb_otg_vbus: regulator-otg-vbus { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usb_otg>; + compatible = "regulator-fixed"; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usb_h1_vbus: regulator-usb-h1-vbus { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usb_h1_vbus>; + compatible = "regulator-fixed"; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_3v3: regulator-3v3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_3v3>; + compatible = "regulator-fixed"; + regulator-name = "reg_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + reg_enet: regulator-ethernet { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_enet>; + compatible = "regulator-fixed"; + regulator-name = "ethernet-supply"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>; + startup-delay-us = <70000>; + enable-active-high; + vin-supply = <&sw4_reg>; + }; + + reg_audio: regulator-audio { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_audio>; + compatible = "regulator-fixed"; + regulator-name = "3v3_aud"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 29 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <®_3v3>; + }; + + reg_hdmi: regulator-hdmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_hdmi>; + compatible = "regulator-fixed"; + regulator-name = "hdmi-supply"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 20 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <®_3v3>; + }; + + reg_uart3: regulator-uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_uart3>; + compatible = "regulator-fixed"; + regulator-name = "uart3-supply"; + gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + vin-supply = <®_3v3>; + }; + + reg_1v8: regulator-1v8 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_1v8>; + compatible = "regulator-fixed"; + regulator-name = "1v8-supply"; + gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + vin-supply = <®_3v3>; + }; + + reg_pcie: regulator-pcie { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_pcie>; + regulator-name = "mpcie_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_mipi: regulator-mipi { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_mipi>; + regulator-name = "mipi_pwr_en"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&gpio3 19 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + sound { + compatible = "fsl,imx-audio-wm8962"; + model = "wm8962-audio"; + ssi-controller = <&ssi2>; + audio-codec = <&wm8962>; + audio-routing = + "Headphone Jack", "HPOUTL", + "Headphone Jack", "HPOUTR", + "Ext Spk", "SPKOUTL", + "Ext Spk", "SPKOUTR", + "AMIC", "MICBIAS", + "IN3R", "AMIC"; + mux-int-port = <2>; + mux-ext-port = <4>; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + status = "okay"; +}; + +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + status = "disabled"; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii"; + phy-reset-duration = <10>; + phy-reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; + phy-supply = <®_enet>; + interrupt-parent = <&gpio1>; + interrupts = <25 IRQ_TYPE_EDGE_FALLING>; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + clock-frequency = <400000>; + status = "okay"; + + wm8962: audio-codec@1a { + compatible = "wlf,wm8962"; + reg = <0x1a>; + clocks = <&clks IMX6QDL_CLK_CKO>; + clock-names = "xclk"; + DCVDD-supply = <®_audio>; + DBVDD-supply = <®_audio>; + AVDD-supply = <®_audio>; + CPVDD-supply = <®_audio>; + MICVDD-supply = <®_audio>; + PLLVDD-supply = <®_audio>; + SPKVDD1-supply = <®_audio>; + SPKVDD2-supply = <®_audio>; + gpio-cfg = < + 0x0000 /* 0:Default */ + 0x0000 /* 1:Default */ + 0x0013 /* 2:FN_DMICCLK */ + 0x0000 /* 3:Default */ + 0x8014 /* 4:FN_DMICCDAT */ + 0x0000 /* 5:Default */ + >; + }; +}; + +&i2c3 { + ov5640: camera@10 { + compatible = "ovti,ov5640"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ov5640>; + reg = <0x10>; + clocks = <&clks IMX6QDL_CLK_CKO>; + clock-names = "xclk"; + DOVDD-supply = <®_mipi>; + AVDD-supply = <®_mipi>; + DVDD-supply = <®_mipi>; + reset-gpios = <&gpio3 26 GPIO_ACTIVE_LOW>; + powerdown-gpios = <&gpio3 27 GPIO_ACTIVE_HIGH>; + + port { + ov5640_to_mipi_csi2: endpoint { + remote-endpoint = <&mipi_csi2_in>; + clock-lanes = <0>; + data-lanes = <1 2>; + }; + }; + }; + + pcf8575: gpio@20 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcf8574>; + compatible = "nxp,pcf8575"; + reg = <0x20>; + interrupt-parent = <&gpio6>; + interrupts = <31 IRQ_TYPE_EDGE_FALLING>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + lines-initial-states = <0x0710>; + wakeup-source; + }; +}; + +&ipu1_csi1_from_mipi_vc1 { + clock-lanes = <0>; + data-lanes = <1 2>; +}; + +&mipi_csi { + status = "okay"; + + port@0 { + reg = <0>; + + mipi_csi2_in: endpoint { + remote-endpoint = <&ov5640_to_mipi_csi2>; + clock-lanes = <0>; + data-lanes = <1 2>; + }; + }; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + reset-gpio = <&gpio1 9 GPIO_ACTIVE_LOW>; + vpcie-supply = <®_pcie>; + status = "okay"; +}; + +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; +}; + +&ssi2 { + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_usb_h1_vbus>; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + disable-over-current; + dr_mode = "otg"; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>; + vmmc-supply = <®_3v3>; + no-1-8-v; + keep-power-in-suspend; + cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&iomuxc { + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT20__AUD4_TXC 0x130b0 + MX6QDL_PAD_DISP0_DAT21__AUD4_TXD 0x110b0 + MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS 0x130b0 + MX6QDL_PAD_DISP0_DAT23__AUD4_RXD 0x130b0 + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK 0x100b1 + MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI 0x100b1 + MX6QDL_PAD_KEY_COL1__ECSPI1_MISO 0x100b1 + MX6QDL_PAD_KEY_ROW1__ECSPI1_SS0 0x100b1 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b8b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x100b0 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x13030 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x13030 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x13030 + MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0 /* ENET_INT */ + MX6QDL_PAD_ENET_RX_ER__GPIO1_IO24 0x1b0b0 /* ETHR_nRST */ + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + >; + }; + + pinctrl_led0: led0grp { + fsl,pins = < + MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x1b0b0 + >; + }; + + pinctrl_ov5640: ov5640grp { + fsl,pins = < + MX6QDL_PAD_EIM_D26__GPIO3_IO26 0x1b0b1 + MX6QDL_PAD_EIM_D27__GPIO3_IO27 0x1b0b1 + >; + }; + + pinctrl_pcf8574: pcf8575grp { + fsl,pins = < + MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0x1b0b0 + >; + }; + + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x1b0b0 + MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0 + >; + }; + + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1 + >; + }; + + pinctrl_reg_1v8: reg1v8grp { + fsl,pins = < + MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x1b0b0 + >; + }; + + pinctrl_reg_3v3: reg3v3grp { + fsl,pins = < + MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b0 + >; + }; + + pinctrl_reg_audio: reg-audiogrp { + fsl,pins = < + MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 + >; + }; + + pinctrl_reg_enet: reg-enetgrp { + fsl,pins = < + MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x1b0b0 + >; + }; + + pinctrl_reg_hdmi: reg-hdmigrp { + fsl,pins = < + MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x1b0b0 + >; + }; + + pinctrl_reg_mipi: reg-mipigrp { + fsl,pins = <MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x1b0b1>; + }; + + pinctrl_reg_pcie: reg-pciegrp { + fsl,pins = < + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0 + >; + }; + + pinctrl_reg_uart3: reguart3grp { + fsl,pins = < + MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 + >; + }; + + pinctrl_reg_usb_h1_vbus: usbh1grp { + fsl,pins = < + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0 + >; + }; + + pinctrl_reg_usb_otg: reg-usb-otggrp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D23__UART3_CTS_B 0x1b0b1 + MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_EB3__UART3_RTS_B 0x1b0b1 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0xd17059 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0 /* CD */ + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17069 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10069 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17069 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17069 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17069 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17069 + >; + }; + + pinctrl_usdhc2_100mhz: h100-usdhc2-100mhz { + fsl,pins = < + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0 /* CD */ + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170b9 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100b9 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170b9 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170b9 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170b9 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x170b9 + >; + }; + + pinctrl_usdhc2_200mhz: h100-usdhc2-200mhz { + fsl,pins = < + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0 /* CD */ + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170f9 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100f9 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170f9 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170f9 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170f9 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x170f9 + >; + }; + +}; diff --git a/dts/src/arm/imx6-logicpd-som.dtsi b/dts/src/arm/imx6-logicpd-som.dtsi new file mode 100644 index 0000000000..7ceae35732 --- /dev/null +++ b/dts/src/arm/imx6-logicpd-som.dtsi @@ -0,0 +1,365 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (C) 2019 Logic PD, Inc. + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + chosen { + stdout-path = &uart1; + }; + + memory@10000000 { + device_type = "memory"; + reg = <0x10000000 0x80000000>; + }; + + reg_wl18xx_vmmc: regulator-wl18xx { + compatible = "regulator-fixed"; + regulator-name = "vwl1837"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio7 0 GPIO_ACTIVE_HIGH>; + startup-delay-us = <70000>; + enable-active-high; + }; +}; + +&clks { + assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, + <&clks IMX6QDL_CLK_LDB_DI1_SEL>; + assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>, + <&clks IMX6QDL_CLK_PLL3_USB_OTG>; +}; + +&gpmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpmi_nand>; + nand-on-flash-bbt; + status = "okay"; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + pfuze100: pmic@8 { + compatible = "fsl,pfuze100"; + reg = <0x08>; + + regulators { + sw1a_reg: sw1ab { + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <1450000>; + regulator-name = "vddcore"; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw1c_reg: sw1c { + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <1450000>; + regulator-name = "vddsoc"; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "gen_3v3"; + regulator-boot-on; + }; + + sw3a_reg: sw3a { + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-name = "sw3a_vddr"; + regulator-boot-on; + regulator-always-on; + }; + + sw3b_reg: sw3b { + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-name = "sw3b_vddr"; + regulator-boot-on; + regulator-always-on; + }; + + sw4_reg: sw4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-name = "gen_rgmii"; + }; + + swbst_reg: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + regulator-name = "gen_5v0"; + }; + + snvs_reg: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "gen_vsns"; + regulator-boot-on; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + vgen1_reg: vgen1 { + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-name = "gen_1v5"; + }; + + vgen2_reg: vgen2 { + regulator-name = "vgen2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen3_reg: vgen3 { + regulator-name = "gen_vadj_0"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + vgen4_reg: vgen4 { + regulator-name = "gen_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vgen5_reg: vgen5 { + regulator-name = "gen_vadj_1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen6_reg: vgen6 { + regulator-name = "gen_2v5"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + + coin_reg: coin { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + }; + }; + + temperature-sensor@49 { + compatible = "ti,tmp102"; + reg = <0x49>; + interrupt-parent = <&gpio6>; + interrupts = <15 IRQ_TYPE_LEVEL_LOW>; + #thermal-sensor-cells = <1>; + }; + + temperature-sensor@4a { + compatible = "ti,tmp102"; + reg = <0x4a>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tempsense>; + interrupt-parent = <&gpio6>; + interrupts = <15 IRQ_TYPE_LEVEL_LOW>; + #thermal-sensor-cells = <1>; + }; + + eeprom@51 { + compatible = "atmel,24c64"; + pagesize = <32>; + read-only; /* Manufacturing EEPROM programmed at factory */ + reg = <0x51>; + }; + + eeprom@52 { + compatible = "atmel,24c64"; + pagesize = <32>; + reg = <0x52>; + }; +}; + +/* Reroute power feeding the CPU to come from the external PMIC */ +®_arm +{ + vin-supply = <&sw1a_reg>; +}; + +®_soc +{ + vin-supply = <&sw1c_reg>; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_gpmi_nand: gpmi-nandgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_CLE__NAND_CLE 0x0b0b1 + MX6QDL_PAD_NANDF_ALE__NAND_ALE 0x0b0b1 + MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0x0b0b1 + MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0x0b000 + MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0x0b0b1 + MX6QDL_PAD_SD4_CMD__NAND_RE_B 0x0b0b1 + MX6QDL_PAD_SD4_CLK__NAND_WE_B 0x0b0b1 + MX6QDL_PAD_NANDF_D0__NAND_DATA00 0x0b0b1 + MX6QDL_PAD_NANDF_D1__NAND_DATA01 0x0b0b1 + MX6QDL_PAD_NANDF_D2__NAND_DATA02 0x0b0b1 + MX6QDL_PAD_NANDF_D3__NAND_DATA03 0x0b0b1 + MX6QDL_PAD_NANDF_D4__NAND_DATA04 0x0b0b1 + MX6QDL_PAD_NANDF_D5__NAND_DATA05 0x0b0b1 + MX6QDL_PAD_NANDF_D6__NAND_DATA06 0x0b0b1 + MX6QDL_PAD_NANDF_D7__NAND_DATA07 0x0b0b1 + >; + }; + + pinctrl_hog: hoggrp { + fsl,pins = < /* Enable ARM Debugger */ + MX6QDL_PAD_CSI0_MCLK__ARM_TRACE_CTL 0x1b0b0 + MX6QDL_PAD_CSI0_PIXCLK__ARM_EVENTO 0x1b0b0 + MX6QDL_PAD_CSI0_VSYNC__ARM_TRACE00 0x1b0b0 + MX6QDL_PAD_CSI0_DATA_EN__ARM_TRACE_CLK 0x1b0b0 + MX6QDL_PAD_CSI0_DAT4__ARM_TRACE01 0x1b0b0 + MX6QDL_PAD_CSI0_DAT5__ARM_TRACE02 0x1b0b0 + MX6QDL_PAD_CSI0_DAT6__ARM_TRACE03 0x1b0b0 + MX6QDL_PAD_CSI0_DAT7__ARM_TRACE04 0x1b0b0 + MX6QDL_PAD_CSI0_DAT8__ARM_TRACE05 0x1b0b0 + MX6QDL_PAD_CSI0_DAT9__ARM_TRACE06 0x1b0b0 + MX6QDL_PAD_CSI0_DAT10__ARM_TRACE07 0x1b0b0 + MX6QDL_PAD_CSI0_DAT11__ARM_TRACE08 0x1b0b0 + MX6QDL_PAD_CSI0_DAT12__ARM_TRACE09 0x1b0b0 + MX6QDL_PAD_CSI0_DAT13__ARM_TRACE10 0x1b0b0 + MX6QDL_PAD_CSI0_DAT14__ARM_TRACE11 0x1b0b0 + MX6QDL_PAD_CSI0_DAT15__ARM_TRACE12 0x1b0b0 + MX6QDL_PAD_CSI0_DAT16__ARM_TRACE13 0x1b0b0 + MX6QDL_PAD_CSI0_DAT17__ARM_TRACE14 0x1b0b0 + MX6QDL_PAD_CSI0_DAT18__ARM_TRACE15 0x1b0b0 + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_tempsense: tempsensegrp { + fsl,pins = < + MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x1b0b0 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 + MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x13059 /* BT_EN */ + MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 + MX6QDL_PAD_SD4_DAT5__UART2_RTS_B 0x1b0b1 + MX6QDL_PAD_SD4_DAT6__UART2_CTS_B 0x1b0b1 + MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170B9 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100B9 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170B9 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170B9 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170B9 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170B9 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17049 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10049 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17049 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17049 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17049 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17049 + MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x130b0 /* WL_IRQ */ + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x17059 /* WLAN_EN */ + >; + }; +}; + +&snvs_poweroff { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "ti,wl1837-st"; + enable-gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>; + }; +}; + +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + non-removable; + keep-power-in-suspend; + wakeup-source; + vmmc-supply = <&sw2_reg>; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + non-removable; + cap-power-off-card; + keep-power-in-suspend; + wakeup-source; + vmmc-supply = <®_wl18xx_vmmc>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + wlcore: wlcore@2 { + compatible = "ti,wl1837"; + reg = <2>; + interrupt-parent = <&gpio7>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH>; + tcxo-clock-frequency = <26000000>; + }; +}; diff --git a/dts/src/arm/imx6dl-colibri-eval-v3.dts b/dts/src/arm/imx6dl-colibri-eval-v3.dts index d5f7a1703a..9a5d6c94cc 100644 --- a/dts/src/arm/imx6dl-colibri-eval-v3.dts +++ b/dts/src/arm/imx6dl-colibri-eval-v3.dts @@ -228,10 +228,11 @@ &weim { status = "okay"; - /* weim memory map: 32MB on CS0, 32MB on CS1, 32MB on CS2 */ + /* weim memory map: 32MB on CS0, CS1, CS2 and CS3 */ ranges = <0 0 0x08000000 0x02000000 1 0 0x0a000000 0x02000000 - 2 0 0x0c000000 0x02000000>; + 2 0 0x0c000000 0x02000000 + 3 0 0x0e000000 0x02000000>; /* SRAM on Colibri nEXT_CS0 */ sram@0,0 { diff --git a/dts/src/arm/imx6dl-yapp4-common.dtsi b/dts/src/arm/imx6dl-yapp4-common.dtsi new file mode 100644 index 0000000000..e8d800fec6 --- /dev/null +++ b/dts/src/arm/imx6dl-yapp4-common.dtsi @@ -0,0 +1,595 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (C) 2015-2018 Y Soft Corporation, a.s. + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/pwm/pwm.h> + +/ { + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 500000 PWM_POLARITY_INVERTED>; + brightness-levels = <0 32 64 128 255>; + default-brightness-level = <32>; + num-interpolated-steps = <8>; + power-supply = <&sw2_reg>; + status = "disabled"; + }; + + lcd_display: display { + compatible = "fsl,imx-parallel-display"; + #address-cells = <1>; + #size-cells = <0>; + interface-pix-fmt = "rgb24"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu1>; + status = "disabled"; + + port@0 { + reg = <0>; + + lcd_display_in: endpoint { + remote-endpoint = <&ipu1_di0_disp0>; + }; + }; + + port@1 { + reg = <1>; + + lcd_display_out: endpoint { + remote-endpoint = <&lcd_panel_in>; + }; + }; + }; + + panel: panel { + compatible = "dataimage,scf0700c48ggu18"; + power-supply = <&sw2_reg>; + status = "disabled"; + + port { + lcd_panel_in: endpoint { + remote-endpoint = <&lcd_display_out>; + }; + }; + }; + + reg_pcie: regulator-pcie { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie_reg>; + regulator-name = "MPCIE_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 19 GPIO_ACTIVE_HIGH>; + enable-active-high; + status = "disabled"; + }; + + reg_usb_h1_vbus: regulator-usb-h1-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1_vbus>; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 29 GPIO_ACTIVE_HIGH>; + enable-active-high; + status = "disabled"; + }; + + reg_usb_otg_vbus: regulator-usb-otg-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg_vbus>; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; + enable-active-high; + status = "okay"; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii-id"; + phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; + phy-reset-duration = <20>; + phy-supply = <&sw2_reg>; + phy-handle = <ðphy0>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + phy_port2: phy@1 { + reg = <1>; + }; + + phy_port3: phy@2 { + reg = <2>; + }; + + switch@10 { + compatible = "qca,qca8334"; + reg = <10>; + + switch_ports: ports { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: port@0 { + reg = <0>; + label = "cpu"; + phy-mode = "rgmii-id"; + ethernet = <&fec>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@2 { + reg = <2>; + label = "eth2"; + phy-handle = <&phy_port2>; + }; + + port@3 { + reg = <3>; + label = "eth1"; + phy-handle = <&phy_port3>; + }; + }; + }; + }; +}; + +&hdmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hdmi_cec>; + ddc-i2c-bus = <&i2c2>; + status = "disabled"; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + pmic@8 { + compatible = "fsl,pfuze200"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + reg = <0x8>; + + regulators { + sw1a_reg: sw1ab { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3a_reg: sw3a { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3b_reg: sw3b { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + swbst_reg: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + }; + + vgen1_reg: vgen1 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen2_reg: vgen2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen3_reg: vgen3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen4_reg: vgen4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen5_reg: vgen5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen6_reg: vgen6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + vsnvs_reg: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; + + leds: led-controller@30 { + compatible = "ti,lp5562"; + reg = <0x30>; + clock-mode = /bits/ 8 <1>; + status = "disabled"; + + chan0 { + chan-name = "R"; + led-cur = /bits/ 8 <0x20>; + max-cur = /bits/ 8 <0x60>; + }; + + chan1 { + chan-name = "G"; + led-cur = /bits/ 8 <0x20>; + max-cur = /bits/ 8 <0x60>; + }; + + chan2 { + chan-name = "B"; + led-cur = /bits/ 8 <0x20>; + max-cur = /bits/ 8 <0x60>; + }; + + chan3 { + chan-name = "W"; + led-cur = /bits/ 8 <0x0>; + max-cur = /bits/ 8 <0x0>; + }; + }; + + eeprom@57 { + compatible = "atmel,24c128"; + reg = <0x57>; + pagesize = <64>; + status = "okay"; + }; + + touchscreen: touchscreen@5c { + compatible = "pixcir,pixcir_tangoc"; + reg = <0x5c>; + pinctrl-0 = <&pinctrl_touch>; + interrupt-parent = <&gpio4>; + interrupts = <5 IRQ_TYPE_EDGE_FALLING>; + attb-gpio = <&gpio4 5 GPIO_ACTIVE_HIGH>; + reset-gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>; + touchscreen-size-x = <800>; + touchscreen-size-y = <480>; + status = "disabled"; + }; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "disabled"; + + oled: oled@3d { + compatible = "solomon,ssd1305fb-i2c"; + reg = <0x3d>; + solomon,height = <64>; + solomon,width = <128>; + solomon,page-offset = <0>; + solomon,prechargep2 = <15>; + reset-gpios = <&gpio_oled 1 GPIO_ACTIVE_LOW>; + vbat-supply = <&sw2_reg>; + status = "disabled"; + }; + + gpio_oled: gpio@41 { + compatible = "nxp,pca9536"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x41>; + vcc-supply = <&sw2_reg>; + status = "disabled"; + }; +}; + +&iomuxc { + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b020 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b020 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b020 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b020 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b020 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b020 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b020 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b020 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b020 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b020 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b020 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b020 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b020 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b020 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b010 + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x1b010 + MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b098 + >; + }; + + pinctrl_hdmi_cec: hdmicecgrp { + fsl,pins = < + MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE 0x1b898 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b899 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b899 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b899 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b899 + >; + }; + + pinctrl_ipu1: ipu1grp { + fsl,pins = < + MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10 + MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10 + MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10 + MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x10 + MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10 + MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10 + MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10 + MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10 + MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10 + MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10 + MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10 + MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10 + MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10 + MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10 + MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10 + MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10 + MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10 + MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10 + MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10 + MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10 + MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10 + MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10 + MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10 + MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10 + MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10 + MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10 + MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10 + >; + }; + + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b098 + MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x1b098 + MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x1b098 + >; + }; + + pinctrl_pcie_reg: pciereggrp { + fsl,pins = < + MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x1b098 + >; + }; + + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b098 + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX6QDL_PAD_GPIO_9__PWM1_OUT 0x8 + >; + }; + + pinctrl_touch: touchgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b098 + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b098 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0a8 + MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0a8 + >; + }; + + pinctrl_usbh1: usbh1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D30__USB_H1_OC 0x1b098 + >; + }; + + pinctrl_usbh1_vbus: usbh1-vbus { + fsl,pins = < + MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x98 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x1b098 + MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x1b098 + >; + }; + + pinctrl_usbotg_vbus: usbotg-vbus { + fsl,pins = < + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x98 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x1b018 + MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x1b018 + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + >; + }; + + pinctrl_usdhc4: usdhc4grp { + fsl,pins = < + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x1f069 + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10069 + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17069 + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17069 + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17069 + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17069 + MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17069 + MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17069 + MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17069 + MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17069 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__WDOG2_B 0x1b0b0 + >; + }; +}; + +&ipu1_di0_disp0 { + remote-endpoint = <&lcd_display_in>; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + reset-gpio = <&gpio7 12 GPIO_ACTIVE_LOW>; + vpcie-supply = <®_pcie>; + status = "disabled"; +}; + +&pwm1 { + #pwm-cells = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "disabled"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&usbh1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1>; + vbus-supply = <®_usb_h1_vbus>; + status = "disabled"; +}; + +&usbotg { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + vbus-supply = <®_usb_otg_vbus>; + srp-disable; + hnp-disable; + adp-disable; + status = "okay"; +}; + +&usbphy1 { + fsl,tx-d-cal = <106>; + status = "okay"; +}; + +&usbphy2 { + fsl,tx-d-cal = <109>; + status = "disabled"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + bus-width = <4>; + cd-gpios = <&gpio7 8 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>; + no-1-8-v; + keep-power-in-suspend; + wakeup-source; + vmmc-supply = <&sw2_reg>; + status = "disabled"; +}; + +&usdhc4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc4>; + bus-width = <8>; + non-removable; + no-1-8-v; + keep-power-in-suspend; + vmmc-supply = <&sw2_reg>; + status = "okay"; +}; + +&wdog1 { + status = "disabled"; +}; + +&wdog2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; diff --git a/dts/src/arm/imx6dl-yapp4-draco.dts b/dts/src/arm/imx6dl-yapp4-draco.dts new file mode 100644 index 0000000000..a38c407fd8 --- /dev/null +++ b/dts/src/arm/imx6dl-yapp4-draco.dts @@ -0,0 +1,58 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (C) 2015-2018 Y Soft Corporation, a.s. + +/dts-v1/; + +#include "imx6dl.dtsi" +#include "imx6dl-yapp4-common.dtsi" + +/ { + model = "Y Soft IOTA Draco i.MX6Solo board"; + compatible = "ysoft,imx6dl-yapp4-draco", "fsl,imx6dl"; + + memory@10000000 { + device_type = "memory"; + reg = <0x10000000 0x20000000>; + }; +}; + +&backlight { + status = "okay"; +}; + +&lcd_display { + status = "okay"; +}; + +&leds { + status = "okay"; +}; + +&panel { + status = "okay"; +}; + +&pwm1 { + status = "okay"; +}; + +®_usb_h1_vbus { + status = "okay"; +}; + +&touchscreen { + status = "okay"; +}; + +&usbh1 { + status = "okay"; +}; + +&usbphy2 { + status = "okay"; +}; + +&usdhc3 { + status = "okay"; +}; diff --git a/dts/src/arm/imx6dl-yapp4-hydra.dts b/dts/src/arm/imx6dl-yapp4-hydra.dts new file mode 100644 index 0000000000..f979270647 --- /dev/null +++ b/dts/src/arm/imx6dl-yapp4-hydra.dts @@ -0,0 +1,50 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (C) 2015-2018 Y Soft Corporation, a.s. + +/dts-v1/; + +#include "imx6dl.dtsi" +#include "imx6dl-yapp4-common.dtsi" + +/ { + model = "Y Soft IOTA Hydra i.MX6DualLite board"; + compatible = "ysoft,imx6dl-yapp4-hydra", "fsl,imx6dl"; + + memory@10000000 { + device_type = "memory"; + reg = <0x10000000 0x80000000>; + }; +}; + +&gpio_oled { + status = "okay"; +}; + +&hdmi { + status = "okay"; +}; + +&i2c3 { + status = "okay"; +}; + +&leds { + status = "okay"; +}; + +&oled { + status = "okay"; +}; + +&pcie { + status = "okay"; +}; + +®_pcie { + status = "okay"; +}; + +&usdhc3 { + status = "okay"; +}; diff --git a/dts/src/arm/imx6dl-yapp4-ursa.dts b/dts/src/arm/imx6dl-yapp4-ursa.dts new file mode 100644 index 0000000000..0d594e4bd5 --- /dev/null +++ b/dts/src/arm/imx6dl-yapp4-ursa.dts @@ -0,0 +1,54 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (C) 2015-2018 Y Soft Corporation, a.s. + +/dts-v1/; + +#include "imx6dl.dtsi" +#include "imx6dl-yapp4-common.dtsi" + +/ { + model = "Y Soft IOTA Ursa i.MX6Solo board"; + compatible = "ysoft,imx6dl-yapp4-ursa", "fsl,imx6dl"; + + memory@10000000 { + device_type = "memory"; + reg = <0x10000000 0x20000000>; + }; +}; + +&backlight { + status = "okay"; +}; + +&lcd_display { + status = "okay"; +}; + +&panel { + status = "okay"; +}; + +&pwm1 { + status = "okay"; +}; + +®_usb_h1_vbus { + status = "okay"; +}; + +&switch_ports { + /delete-node/ port@2; +}; + +&touchscreen { + status = "okay"; +}; + +&usbh1 { + status = "okay"; +}; + +&usbphy2 { + status = "okay"; +}; diff --git a/dts/src/arm/imx6q-logicpd.dts b/dts/src/arm/imx6q-logicpd.dts new file mode 100644 index 0000000000..45eb0b7f75 --- /dev/null +++ b/dts/src/arm/imx6q-logicpd.dts @@ -0,0 +1,120 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (C) 2019 Logic PD, Inc. + +/dts-v1/; +#include "imx6q.dtsi" +#include "imx6-logicpd-som.dtsi" +#include "imx6-logicpd-baseboard.dtsi" + +/ { + model = "Logic PD i.MX6QD SOM-M3"; + compatible = "fsl,imx6q"; + + backlight: backlight-lvds { + compatible = "pwm-backlight"; + pwms = <&pwm3 0 20000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + power-supply = <®_lcd>; + }; + + panel-lvds0 { + compatible = "okaya,rs800480t-7x0gp"; + + port { + panel_in_lvds0: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + }; + + reg_lcd: regulator-lcd { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd_reg>; + compatible = "regulator-fixed"; + regulator-name = "lcd_panel_pwr"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio4 17 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + vin-supply = <®_3v3>; + startup-delay-us = <500000>; + }; + + reg_lcd_reset: regulator-lcd-reset { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd_reset>; + compatible = "regulator-fixed"; + regulator-name = "nLCD_RESET"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + vin-supply = <®_lcd>; + }; +}; + +&clks { + assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, + <&clks IMX6QDL_CLK_LDB_DI1_SEL>, + <&clks IMX6QDL_CLK_IPU1_DI0_PRE_SEL>, + <&clks IMX6QDL_CLK_IPU2_DI0_PRE_SEL>; + assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>, + <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>, + <&clks IMX6QDL_CLK_PLL2_PFD2_396M>, + <&clks IMX6QDL_CLK_PLL2_PFD2_396M>; +}; + +&hdmi { + ddc-i2c-bus = <&i2c3>; + status = "okay"; +}; + +&ldb { + status = "okay"; + + lvds-channel@0 { + fsl,data-mapping = "spwg"; + fsl,data-width = <24>; + status = "okay"; + + port@4 { + reg = <4>; + lvds0_out: endpoint { + remote-endpoint = <&panel_in_lvds0>; + }; + }; + }; + +}; + +&pwm3 { + status = "okay"; +}; + +®_hdmi { + regulator-always-on; /* Without this, the level shifter on HDMI doesn't turn on */ +}; + +&iomuxc { + pinctrl_lcd_reg: lcdreg { + fsl,pins = < + MX6QDL_PAD_DI0_PIN15__GPIO4_IO17 0x100b0 /* R_LCD_PANEL_PWR */ + >; + }; + + pinctrl_lcd_reset: lcdreset { + fsl,pins = < + MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x100b0 /* LCD_nRESET */ + >; + }; + + pinctrl_touchscreen: touchscreengrp { + fsl,pins = < + MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x1b0b0 /* TOUCH_nPINTDAV */ + >; + }; +}; diff --git a/dts/src/arm/imx6q-tbs2910.dts b/dts/src/arm/imx6q-tbs2910.dts index 279b15e9ae..2ce8399a10 100644 --- a/dts/src/arm/imx6q-tbs2910.dts +++ b/dts/src/arm/imx6q-tbs2910.dts @@ -1,49 +1,6 @@ -/* - * Copyright 2014 Soeren Moch <smoch@web.de> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +// +// Copyright 2014 Soeren Moch <smoch@web.de> /dts-v1/; diff --git a/dts/src/arm/imx6qdl-apalis.dtsi b/dts/src/arm/imx6qdl-apalis.dtsi index 8380f1b268..7c4ad541c3 100644 --- a/dts/src/arm/imx6qdl-apalis.dtsi +++ b/dts/src/arm/imx6qdl-apalis.dtsi @@ -332,11 +332,17 @@ id = <0>; blocks = <0x5>; irq-trigger = <0x1>; + /* 3.25 MHz ADC clock speed */ + st,adc-freq = <1>; + /* 12-bit ADC */ + st,mod-12b = <1>; + /* internal ADC reference */ + st,ref-sel = <0>; + /* ADC converstion time: 80 clocks */ + st,sample-time = <4>; stmpe_touchscreen { compatible = "st,stmpe-ts"; - /* 3.25 MHz ADC clock speed */ - st,adc-freq = <1>; /* 8 sample average control */ st,ave-ctrl = <3>; /* 7 length fractional part in z */ @@ -346,17 +352,17 @@ * current limit value */ st,i-drive = <1>; - /* 12-bit ADC */ - st,mod-12b = <1>; - /* internal ADC reference */ - st,ref-sel = <0>; - /* ADC converstion time: 80 clocks */ - st,sample-time = <4>; /* 1 ms panel driver settling time */ st,settling = <3>; /* 5 ms touch detect interrupt delay */ st,touch-det-delay = <5>; }; + + stmpe_adc { + compatible = "st,stmpe-adc"; + /* forbid to use ADC channels 3-0 (touch) */ + st,norequest-mask = <0x0F>; + }; }; }; @@ -369,8 +375,8 @@ pinctrl-names = "default", "recovery"; pinctrl-0 = <&pinctrl_i2c3>; pinctrl-1 = <&pinctrl_i2c3_recovery>; - scl-gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>; - sda-gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>; + scl-gpios = <&gpio3 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio3 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "disabled"; }; diff --git a/dts/src/arm/imx6qdl-colibri.dtsi b/dts/src/arm/imx6qdl-colibri.dtsi index 87e15e7cb3..1beac22266 100644 --- a/dts/src/arm/imx6qdl-colibri.dtsi +++ b/dts/src/arm/imx6qdl-colibri.dtsi @@ -262,11 +262,17 @@ id = <0>; blocks = <0x5>; irq-trigger = <0x1>; + /* 3.25 MHz ADC clock speed */ + st,adc-freq = <1>; + /* 12-bit ADC */ + st,mod-12b = <1>; + /* internal ADC reference */ + st,ref-sel = <0>; + /* ADC converstion time: 80 clocks */ + st,sample-time = <4>; stmpe_touchscreen { compatible = "st,stmpe-ts"; - /* 3.25 MHz ADC clock speed */ - st,adc-freq = <1>; /* 8 sample average control */ st,ave-ctrl = <3>; /* 7 length fractional part in z */ @@ -276,17 +282,17 @@ * current limit value */ st,i-drive = <1>; - /* 12-bit ADC */ - st,mod-12b = <1>; - /* internal ADC reference */ - st,ref-sel = <0>; - /* ADC converstion time: 80 clocks */ - st,sample-time = <4>; /* 1 ms panel driver settling time */ st,settling = <3>; /* 5 ms touch detect interrupt delay */ st,touch-det-delay = <5>; }; + + stmpe_adc { + compatible = "st,stmpe-adc"; + /* forbid to use ADC channels 3-0 (touch) */ + st,norequest-mask = <0x0F>; + }; }; }; @@ -298,8 +304,8 @@ pinctrl-names = "default", "recovery"; pinctrl-0 = <&pinctrl_i2c3>; pinctrl-1 = <&pinctrl_i2c3_recovery>; - scl-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>; - sda-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; + scl-gpios = <&gpio1 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "disabled"; }; diff --git a/dts/src/arm/imx6qdl-icore-rqs.dtsi b/dts/src/arm/imx6qdl-icore-rqs.dtsi index 1d1b4bd067..a4217f564a 100644 --- a/dts/src/arm/imx6qdl-icore-rqs.dtsi +++ b/dts/src/arm/imx6qdl-icore-rqs.dtsi @@ -264,7 +264,7 @@ pinctrl-2 = <&pinctrl_usdhc3_200mhz>; vmcc-supply = <®_sd3_vmmc>; cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; - bus-witdh = <4>; + bus-width = <4>; no-1-8-v; status = "okay"; }; @@ -275,7 +275,7 @@ pinctrl-1 = <&pinctrl_usdhc4_100mhz>; pinctrl-2 = <&pinctrl_usdhc4_200mhz>; vmcc-supply = <®_sd4_vmmc>; - bus-witdh = <8>; + bus-width = <8>; no-1-8-v; non-removable; status = "okay"; diff --git a/dts/src/arm/imx6qdl-phytec-pfla02.dtsi b/dts/src/arm/imx6qdl-phytec-pfla02.dtsi index 1b50b01e9b..027df06c5d 100644 --- a/dts/src/arm/imx6qdl-phytec-pfla02.dtsi +++ b/dts/src/arm/imx6qdl-phytec-pfla02.dtsi @@ -89,10 +89,24 @@ &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; + phy-handle = <ðphy>; phy-mode = "rgmii"; + phy-reset-duration = <10>; /* in msecs */ phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>; phy-supply = <&vdd_eth_io_reg>; status = "disabled"; + + fec_mdio: mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + txc-skew-ps = <1680>; + rxc-skew-ps = <1860>; + }; + }; }; &gpmi { @@ -117,6 +131,7 @@ reg = <0x58>; interrupt-parent = <&gpio2>; interrupts = <9 IRQ_TYPE_LEVEL_LOW>; /* active-low GPIO2_9 */ + interrupt-controller; regulators { vddcore_reg: bcore1 { diff --git a/dts/src/arm/imx6qdl-sabresd.dtsi b/dts/src/arm/imx6qdl-sabresd.dtsi index 8930aec646..a0705066cc 100644 --- a/dts/src/arm/imx6qdl-sabresd.dtsi +++ b/dts/src/arm/imx6qdl-sabresd.dtsi @@ -64,7 +64,6 @@ regulator-max-microvolt = <3300000>; gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>; enable-active-high; - regulator-always-on; }; gpio-keys { @@ -250,6 +249,8 @@ pinctrl-0 = <&pinctrl_i2c1_mma8451_int>; interrupt-parent = <&gpio1>; interrupts = <18 IRQ_TYPE_LEVEL_LOW>; + vdd-supply = <®_sensors>; + vddio-supply = <®_sensors>; }; ov5642: camera@3c { @@ -440,6 +441,8 @@ pinctrl-0 = <&pinctrl_i2c3_mag3110_int>; interrupt-parent = <&gpio3>; interrupts = <16 IRQ_TYPE_EDGE_RISING>; + vdd-supply = <®_sensors>; + vddio-supply = <®_sensors>; }; light-sensor@44 { @@ -449,6 +452,7 @@ pinctrl-0 = <&pinctrl_i2c3_isl29023_int>; interrupt-parent = <&gpio3>; interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + vcc-supply = <®_sensors>; }; }; diff --git a/dts/src/arm/imx6sl.dtsi b/dts/src/arm/imx6sl.dtsi index e7524e73ef..4b4813f176 100644 --- a/dts/src/arm/imx6sl.dtsi +++ b/dts/src/arm/imx6sl.dtsi @@ -338,7 +338,7 @@ compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm"; reg = <0x02080000 0x4000>; interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6SL_CLK_PWM1>, + clocks = <&clks IMX6SL_CLK_PERCLK>, <&clks IMX6SL_CLK_PWM1>; clock-names = "ipg", "per"; }; @@ -348,7 +348,7 @@ compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm"; reg = <0x02084000 0x4000>; interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6SL_CLK_PWM2>, + clocks = <&clks IMX6SL_CLK_PERCLK>, <&clks IMX6SL_CLK_PWM2>; clock-names = "ipg", "per"; }; @@ -358,7 +358,7 @@ compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm"; reg = <0x02088000 0x4000>; interrupts = <0 85 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6SL_CLK_PWM3>, + clocks = <&clks IMX6SL_CLK_PERCLK>, <&clks IMX6SL_CLK_PWM3>; clock-names = "ipg", "per"; }; @@ -368,7 +368,7 @@ compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm"; reg = <0x0208c000 0x4000>; interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6SL_CLK_PWM4>, + clocks = <&clks IMX6SL_CLK_PERCLK>, <&clks IMX6SL_CLK_PWM4>; clock-names = "ipg", "per"; }; diff --git a/dts/src/arm/imx6sx.dtsi b/dts/src/arm/imx6sx.dtsi index d1375d3650..5b16e65f76 100644 --- a/dts/src/arm/imx6sx.dtsi +++ b/dts/src/arm/imx6sx.dtsi @@ -785,6 +785,18 @@ clocks = <&clks IMX6SX_CLK_GPU>; }; + pd_disp: power-domain@2 { + reg = <2>; + #power-domain-cells = <0>; + clocks = <&clks IMX6SX_CLK_PXP_AXI>, + <&clks IMX6SX_CLK_DISPLAY_AXI>, + <&clks IMX6SX_CLK_LCDIF1_PIX>, + <&clks IMX6SX_CLK_LCDIF_APB>, + <&clks IMX6SX_CLK_LCDIF2_PIX>, + <&clks IMX6SX_CLK_CSI>, + <&clks IMX6SX_CLK_VADC>; + }; + pd_pci: power-domain@3 { reg = <3>; #power-domain-cells = <0>; @@ -1205,6 +1217,7 @@ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6SX_CLK_PXP_AXI>; clock-names = "axi"; + power-domains = <&pd_disp>; status = "disabled"; }; @@ -1226,6 +1239,7 @@ <&clks IMX6SX_CLK_LCDIF_APB>, <&clks IMX6SX_CLK_DISPLAY_AXI>; clock-names = "pix", "axi", "disp_axi"; + power-domains = <&pd_disp>; status = "disabled"; }; @@ -1237,6 +1251,7 @@ <&clks IMX6SX_CLK_LCDIF_APB>, <&clks IMX6SX_CLK_DISPLAY_AXI>; clock-names = "pix", "axi", "disp_axi"; + power-domains = <&pd_disp>; status = "disabled"; }; @@ -1246,6 +1261,7 @@ clocks = <&clks IMX6SX_CLK_VADC>, <&clks IMX6SX_CLK_CSI>; clock-names = "vadc", "csi"; + power-domains = <&pd_disp>; status = "disabled"; }; }; @@ -1370,7 +1386,8 @@ <&clks IMX6SX_CLK_PCIE_REF_125M>, <&clks IMX6SX_CLK_DISPLAY_AXI>; clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_inbound_axi"; - power-domains = <&pd_pci>; + power-domains = <&pd_disp>, <&pd_pci>; + power-domain-names = "pcie", "pcie_phy"; status = "disabled"; }; }; diff --git a/dts/src/arm/imx6ul-phytec-pcl063.dtsi b/dts/src/arm/imx6ul-phytec-pcl063.dtsi new file mode 100644 index 0000000000..fc2997449b --- /dev/null +++ b/dts/src/arm/imx6ul-phytec-pcl063.dtsi @@ -0,0 +1,148 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2016 PHYTEC Messtechnik GmbH + * Author: Christian Hemp <c.hemp@phytec.de> + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/pwm/pwm.h> +#include "imx6ul.dtsi" + +/ { + model = "Phytec phyCORE i.MX6 UltraLite"; + compatible = "phytec,imx6ul-pcl063", "fsl,imx6ul"; + + chosen { + stdout-path = &uart1; + }; + + /* + * Set the minimum memory size here and + * let the bootloader set the real size. + */ + memory { + device_type = "memory"; + reg = <0x80000000 0x8000000>; + }; + + gpio_leds_som: leds { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpioleds_som>; + compatible = "gpio-leds"; + + led_green { + label = "phycore:green"; + gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1>; + phy-mode = "rmii"; + phy-handle = <ðphy0>; + status = "okay"; + + mdio: mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@1 { + reg = <1>; + interrupt-parent = <&gpio1>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + micrel,led-mode = <1>; + clocks = <&clks IMX6UL_CLK_ENET_REF>; + clock-names = "rmii-ref"; + }; + }; +}; + +&gpmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpmi_nand>; + nand-on-flash-bbt; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 =<&pinctrl_i2c1>; + clock-frequency = <100000>; + status = "okay"; + + eeprom@52 { + compatible = "catalyst,24c32", "atmel,24c32"; + reg = <0x52>; + }; +}; + +&snvs_poweroff { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&iomuxc { + pinctrl_enet1: enet1grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x1b0b0 + MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x1b0b0 + MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0 + MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x1b0b0 + MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0 + MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0 + MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0 + MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0 + MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0 + MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b031 + MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0x17059 + >; + }; + + pinctrl_gpioleds_som: gpioledssomgrp { + fsl,pins = <MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04 0x0b0b0>; + }; + + pinctrl_gpmi_nand: gpminandgrp { + fsl,pins = < + MX6UL_PAD_NAND_CLE__RAWNAND_CLE 0x0b0b1 + MX6UL_PAD_NAND_ALE__RAWNAND_ALE 0x0b0b1 + MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B 0x0b0b1 + MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B 0x0b000 + MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B 0x0b0b1 + MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B 0x0b0b1 + MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B 0x0b0b1 + MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00 0x0b0b1 + MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01 0x0b0b1 + MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02 0x0b0b1 + MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03 0x0b0b1 + MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04 0x0b0b1 + MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05 0x0b0b1 + MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06 0x0b0b1 + MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07 0x0b0b1 + >; + }; + + pinctrl_i2c1: i2cgrp { + fsl,pins = < + MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0 + MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1 + MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1 + >; + }; + +}; diff --git a/dts/src/arm/imx6ul-phytec-peb-eval-01.dtsi b/dts/src/arm/imx6ul-phytec-peb-eval-01.dtsi new file mode 100644 index 0000000000..e2f38f39a6 --- /dev/null +++ b/dts/src/arm/imx6ul-phytec-peb-eval-01.dtsi @@ -0,0 +1,55 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2016 PHYTEC Messtechnik + * Author: Christian Hemp <c.hemp@phytec.de> + */ + +#include <dt-bindings/input/input.h> + +/ { + gpio_keys: gpio-keys { + compatible = "gpio-key"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; + status = "disabled"; + + power { + label = "Power Button"; + gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + wakeup-source; + }; + }; + + user_leds: leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_user_leds>; + status = "disabled"; + + led_yellow { + gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + + led_red { + gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + }; +}; + +&iomuxc { + pinctrl_gpio_keys: gpio_keysgrp { + fsl,pins = < + MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x79 + >; + }; + + pinctrl_user_leds: user_ledsgrp { + fsl,pins = < + MX6UL_PAD_JTAG_MOD__GPIO1_IO10 0x79 + MX6UL_PAD_GPIO1_IO01__GPIO1_IO01 0x79 + >; + }; +}; diff --git a/dts/src/arm/imx6ul-phytec-phyboard-segin-full.dts b/dts/src/arm/imx6ul-phytec-phyboard-segin-full.dts new file mode 100644 index 0000000000..b6a1407a9d --- /dev/null +++ b/dts/src/arm/imx6ul-phytec-phyboard-segin-full.dts @@ -0,0 +1,89 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2016 PHYTEC Messtechnik GmbH + * Author: Christian Hemp <c.hemp@phytec.de> + */ + +/dts-v1/; +#include "imx6ul-phytec-pcl063.dtsi" +#include "imx6ul-phytec-phyboard-segin.dtsi" +#include "imx6ul-phytec-peb-eval-01.dtsi" + +/ { + model = "Phytec phyBOARD-Segin i.MX6 UltraLite Full Featured"; + compatible = "phytec,imx6ul-pbacd10", "phytec,imx6ul-pcl063", "fsl,imx6ul"; +}; + +&adc1 { + status = "okay"; +}; + +&can1 { + status = "okay"; +}; + +&tlv320 { + status = "okay"; +}; + +&ecspi3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi3>; + cs-gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&fec2 { + status = "okay"; +}; + +&i2c_rtc { + status = "okay"; +}; + +®_can1_en { + status = "okay"; +}; + +®_sound_1v8 { + status = "okay"; +}; + +®_sound_3v3 { + status = "okay"; +}; + +&sai2 { + status = "okay"; +}; + +&sound { + status = "okay"; +}; + +&uart5 { + status = "okay"; +}; + +&usbotg1 { + status = "okay"; +}; + +&usbotg2 { + status = "okay"; +}; + +&usdhc1 { + status = "okay"; +}; + +&iomuxc { + pinctrl_ecspi3: ecspi3grp { + fsl,pins = < + MX6UL_PAD_UART2_RTS_B__ECSPI3_MISO 0x10b0 + MX6UL_PAD_UART2_CTS_B__ECSPI3_MOSI 0x10b0 + MX6UL_PAD_UART2_RX_DATA__ECSPI3_SCLK 0x10b0 + MX6UL_PAD_UART2_TX_DATA__GPIO1_IO20 0x10b0 + >; + }; +}; diff --git a/dts/src/arm/imx6ul-phytec-phyboard-segin.dtsi b/dts/src/arm/imx6ul-phytec-phyboard-segin.dtsi new file mode 100644 index 0000000000..7bf439a77d --- /dev/null +++ b/dts/src/arm/imx6ul-phytec-phyboard-segin.dtsi @@ -0,0 +1,329 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2016 PHYTEC Messtechnik GmbH + * Author: Christian Hemp <c.hemp@phytec.de> + */ + +/ { + model = "Phytec phyBOARD-Segin i.MX6 UltraLite"; + compatible = "phytec,imx6ul-pbacd-10", "phytec,imx6ul-pcl063", "fsl,imx6ul"; + + aliases { + rtc0 = &i2c_rtc; + rtc1 = &snvs_rtc; + }; + + reg_sound_1v8: regulator-1v8 { + compatible = "regulator-fixed"; + regulator-name = "i2s-audio-1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + status = "disabled"; + }; + + reg_sound_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "i2s-audio-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + status = "disabled"; + }; + + reg_can1_en: regulator-can1 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&princtrl_flexcan1_en>; + regulator-name = "Can"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + status = "disabled"; + }; + + reg_adc1_vref_3v3: regulator-vref-3v3 { + compatible = "regulator-fixed"; + regulator-name = "vref-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + sound: sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "phyBOARD-Segin-TLV320AIC3007"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&dailink_master>; + simple-audio-card,frame-master = <&dailink_master>; + simple-audio-card,widgets = + "Line", "Line In", + "Line", "Line Out", + "Speaker", "Speaker"; + simple-audio-card,routing = + "Line Out", "LLOUT", + "Line Out", "RLOUT", + "Speaker", "SPOP", + "Speaker", "SPOM", + "LINE1L", "Line In", + "LINE1R", "Line In"; + status = "disabled"; + + simple-audio-card,cpu { + sound-dai = <&sai2>; + }; + + dailink_master: simple-audio-card,codec { + sound-dai = <&tlv320>; + clocks = <&clks IMX6UL_CLK_SAI2>; + }; + }; + +}; + +&adc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc1>; + vref-supply = <®_adc1_vref_3v3>; + /* + * driver can not separate a specific channel so we request 4 channels + * here - we need only the fourth channel + */ + num-channels = <4>; + status = "disabled"; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + xceiver-supply = <®_can1_en>; + status = "disabled"; +}; + +&clks { + assigned-clocks = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>; + assigned-clock-rates = <786432000>; +}; + +&fec2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet2>; + phy-mode = "rmii"; + phy-handle = <ðphy1>; + status = "disabled"; +}; + +&i2c1 { + tlv320: codec@18 { + compatible = "ti,tlv320aic3007"; + #sound-dai-cells = <0>; + reg = <0x18>; + AVDD-supply = <®_sound_3v3>; + IOVDD-supply = <®_sound_3v3>; + DRVDD-supply = <®_sound_3v3>; + DVDD-supply = <®_sound_1v8>; + status = "disabled"; + }; + + stmpe: touchscreen@44 { + compatible = "st,stmpe811"; + reg = <0x44>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&gpio5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_stmpe>; + status = "disabled"; + + touchscreen { + compatible = "st,stmpe-ts"; + st,sample-time = <4>; + st,mod-12b = <1>; + st,ref-sel = <0>; + st,adc-freq = <1>; + st,ave-ctrl = <1>; + st,touch-det-delay = <2>; + st,settling = <2>; + st,fraction-z = <7>; + st,i-drive = <1>; + touchscreen-inverted-x = <1>; + touchscreen-inverted-y = <1>; + }; + }; + + i2c_rtc: rtc@68 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rtc_int>; + compatible = "microcrystal,rv4162"; + reg = <0x68>; + interrupt-parent = <&gpio5>; + interrupts = <1 IRQ_TYPE_LEVEL_LOW>; + status = "disabled"; + }; +}; + +&mdio { + ethphy1: ethernet-phy@2 { + reg = <2>; + micrel,led-mode = <1>; + clocks = <&clks IMX6UL_CLK_ENET2_REF>; + clock-names = "rmii-ref"; + }; +}; + +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; + status = "disabled"; +}; + +&sai2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai2>; + assigned-clocks = <&clks IMX6UL_CLK_SAI2_SEL>, + <&clks IMX6UL_CLK_SAI2>; + assigned-clock-parents = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>; + assigned-clock-rates = <0>, <19200000>; + fsl,sai-mclk-direction-output; + status = "disabled"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + uart-has-rtscts; + status = "disabled"; +}; + +&usbotg1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_otg1_id>; + dr_mode = "otg"; + status = "disabled"; +}; + +&usbotg2 { + dr_mode = "host"; + disable-over-current; + status = "disabled"; +}; + +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>; + no-1-8-v; + keep-power-in-suspend; + wakeup-source; + status = "disabled"; +}; + +&iomuxc { + pinctrl_adc1: adc1grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0xb0 + >; + }; + + pinctrl_enet2: enet2grp { + fsl,pins = < + MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x1b0b0 + MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER 0x1b0b0 + MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x1b0b0 + MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x1b0b0 + MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x1b0b0 + MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b0b0 + MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b0b0 + MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x4001b031 + >; + }; + + pinctrl_flexcan1: flexcan1 { + fsl,pins = < + MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x0b0b0 + MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x0b0b0 + >; + }; + + princtrl_flexcan1_en: flexcan1engrp { + fsl,pins = < + MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x17059 + >; + }; + + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO04__PWM3_OUT 0x0b0b0 + >; + }; + + pinctrl_rtc_int: rtcintgrp { + fsl,pins = < + MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x17059 + >; + }; + + pinctrl_sai2: sai2grp { + fsl,pins = < + MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK 0x17088 + MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC 0x17088 + MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA 0x11088 + MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA 0x11088 + MX6UL_PAD_JTAG_TMS__SAI2_MCLK 0x17088 + >; + }; + + pinctrl_stmpe: stmpegrp { + fsl,pins = < + MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x17059 + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX6UL_PAD_UART5_TX_DATA__UART5_DCE_TX 0x1b0b1 + MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX 0x1b0b1 + MX6UL_PAD_GPIO1_IO08__UART5_DCE_RTS 0x1b0b1 + MX6UL_PAD_GPIO1_IO09__UART5_DCE_CTS 0x1b0b1 + >; + }; + + pinctrl_usb_otg1_id: usbotg1idgrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID 0x17059 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059 + MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x17059 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1grp100mhz { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170b9 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100b9 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170b9 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1grp200mhz { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170f9 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100f9 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170f9 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170f9 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170f9 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9 + >; + }; +}; diff --git a/dts/src/arm/imx6ull-colibri.dtsi b/dts/src/arm/imx6ull-colibri.dtsi index 6c63a73846..9ad1da1597 100644 --- a/dts/src/arm/imx6ull-colibri.dtsi +++ b/dts/src/arm/imx6ull-colibri.dtsi @@ -94,16 +94,16 @@ pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c1>; pinctrl-1 = <&pinctrl_i2c1_gpio>; - sda-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>; - scl-gpios = <&gpio1 28 GPIO_ACTIVE_LOW>; + sda-gpios = <&gpio1 29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio1 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; }; &i2c2 { pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c2>; pinctrl-1 = <&pinctrl_i2c2_gpio>; - sda-gpios = <&gpio1 31 GPIO_ACTIVE_LOW>; - scl-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; + sda-gpios = <&gpio1 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio1 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "okay"; ad7879@2c { diff --git a/dts/src/arm/imx6ull-pinfunc-snvs.h b/dts/src/arm/imx6ull-pinfunc-snvs.h index f6fb6783c1..54cfe72295 100644 --- a/dts/src/arm/imx6ull-pinfunc-snvs.h +++ b/dts/src/arm/imx6ull-pinfunc-snvs.h @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: GPL-2.0 +/* SPDX-License-Identifier: GPL-2.0 */ /* * Copyright (C) 2016 Freescale Semiconductor, Inc. * Copyright (C) 2017 NXP diff --git a/dts/src/arm/imx6ull.dtsi b/dts/src/arm/imx6ull.dtsi index f3668fe69e..22e4a307fa 100644 --- a/dts/src/arm/imx6ull.dtsi +++ b/dts/src/arm/imx6ull.dtsi @@ -30,6 +30,18 @@ >; }; +&ocotp { + compatible = "fsl,imx6ull-ocotp", "syscon"; +}; + +&usdhc1 { + compatible = "fsl,imx6ull-usdhc", "fsl,imx6sx-usdhc"; +}; + +&usdhc2 { + compatible = "fsl,imx6ull-usdhc", "fsl,imx6sx-usdhc"; +}; + / { soc { aips3: aips-bus@2200000 { diff --git a/dts/src/arm/imx7d.dtsi b/dts/src/arm/imx7d.dtsi index 6b298e388f..6eb98e7c56 100644 --- a/dts/src/arm/imx7d.dtsi +++ b/dts/src/arm/imx7d.dtsi @@ -96,6 +96,14 @@ }; }; +&aips2 { + pcie_phy: pcie-phy@306d0000 { + compatible = "fsl,imx7d-pcie-phy"; + reg = <0x306d0000 0x10000>; + status = "disabled"; + }; +}; + &aips3 { usbotg2: usb@30b20000 { compatible = "fsl,imx7d-usb", "fsl,imx27-usb"; @@ -173,6 +181,7 @@ <&src IMX7_RESET_PCIE_CTRL_APPS_EN>, <&src IMX7_RESET_PCIE_CTRL_APPS_TURNOFF>; reset-names = "pciephy", "apps", "turnoff"; + fsl,imx7d-pcie-phy = <&pcie_phy>; status = "disabled"; }; }; diff --git a/dts/src/arm/imx7ulp.dtsi b/dts/src/arm/imx7ulp.dtsi index 931b2754b0..fca6e50f37 100644 --- a/dts/src/arm/imx7ulp.dtsi +++ b/dts/src/arm/imx7ulp.dtsi @@ -199,9 +199,13 @@ assigned-clock-parents = <&scg1 IMX7ULP_CLK_SOSC_BUS_CLK>; }; - smc1: smc1@40410000 { + smc1: clock-controller@40410000 { compatible = "fsl,imx7ulp-smc1"; reg = <0x40410000 0x1000>; + #clock-cells = <1>; + clocks = <&scg1 IMX7ULP_CLK_CORE_DIV>, + <&scg1 IMX7ULP_CLK_HSRUN_CORE_DIV>; + clock-names = "divcore", "hsrun_divcore"; }; pcc3: clock-controller@40b30000 { @@ -343,4 +347,17 @@ gpio-ranges = <&iomuxc1 0 96 32>; }; }; + + m4aips1: bus@41080000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x41080000 0x80000>; + ranges; + + sim: sim@410a3000 { + compatible = "fsl,imx7ulp-sim", "syscon"; + reg = <0x410a3000 0x1000>; + }; + }; }; diff --git a/dts/src/arm/integrator.dtsi b/dts/src/arm/integrator.dtsi index 4d58638d10..1612a869a4 100644 --- a/dts/src/arm/integrator.dtsi +++ b/dts/src/arm/integrator.dtsi @@ -3,9 +3,15 @@ * SoC core Device Tree for the ARM Integrator platforms */ -/include/ "skeleton.dtsi" - / { + #address-cells = <1>; + #size-cells = <1>; + + memory { + device_type = "memory"; + reg = <0x0 0x0>; + }; + core-module@10000000 { compatible = "arm,core-module-integrator", "syscon", "simple-mfd"; reg = <0x10000000 0x200>; diff --git a/dts/src/arm/integratorcp.dts b/dts/src/arm/integratorcp.dts index a185ab8759..01fa229e1b 100644 --- a/dts/src/arm/integratorcp.dts +++ b/dts/src/arm/integratorcp.dts @@ -192,6 +192,43 @@ interrupts = <27>; }; + bridge { + compatible = "ti,ths8134a", "ti,ths8134"; + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + vga_bridge_in: endpoint { + remote-endpoint = <&clcd_pads_vga_dac>; + }; + }; + + port@1 { + reg = <1>; + + vga_bridge_out: endpoint { + remote-endpoint = <&vga_con_in>; + }; + }; + }; + }; + + vga { + compatible = "vga-connector"; + + port { + vga_con_in: endpoint { + remote-endpoint = <&vga_bridge_out>; + }; + }; + }; + fpga { /* * These PrimeCells are at the same location and using @@ -254,39 +291,27 @@ interrupts = <22>; clocks = <&auxosc>, <&pclk>; clock-names = "clcdclk", "apb_pclk"; + /* 640x480 16bpp @ 25.175MHz is 36827428 bytes/s */ + max-memory-bandwidth = <40000000>; - port { - /* - * The VGA connected is implemented with a - * THS8134A triple DAC that can be run in 24bit - * or 16bit RGB mode. - */ - clcd_pads: endpoint { - remote-endpoint = <&clcd_panel>; - arm,pl11x,tft-r0g0b0-pads = <1 7 13>; - }; - }; - - panel { - compatible = "panel-dpi"; - - port { - clcd_panel: endpoint { - remote-endpoint = <&clcd_pads>; - }; - }; - - /* Standard 640x480 VGA timings */ - panel-timing { - clock-frequency = <25175000>; - hactive = <640>; - hback-porch = <48>; - hfront-porch = <16>; - hsync-len = <96>; - vactive = <480>; - vback-porch = <33>; - vfront-porch = <10>; - vsync-len = <2>; + /* + * This port is routed through a PLD (Programmable + * Logic Device) that routes the output from the CLCD + * (after transformations) to the VGA DAC and also an + * external panel connector. The PLD is essential for + * supporting RGB565/BGR565. + * + * The signals from the port thus reaches two endpoints. + * The PLD is managed through a few special bits in the + * FPGA "sysreg". + * + * This arrangement can be clearly seen in + * ARM DUI 0225D, page 3-41, figure 3-19. + */ + port@0 { + clcd_pads_vga_dac: endpoint { + remote-endpoint = <&vga_bridge_in>; + arm,pl11x,tft-r0g0b0-pads = <0 8 16>; }; }; }; diff --git a/dts/src/arm/kirkwood-dir665.dts b/dts/src/arm/kirkwood-dir665.dts index 31ceacd841..b3ad3f607d 100644 --- a/dts/src/arm/kirkwood-dir665.dts +++ b/dts/src/arm/kirkwood-dir665.dts @@ -190,53 +190,6 @@ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; }; }; - - dsa { - status = "disabled"; - - compatible = "marvell,dsa"; - #address-cells = <2>; - #size-cells = <0>; - - dsa,ethernet = <ð0port>; - dsa,mii-bus = <&mdio>; - - switch@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0 0>; /* MDIO address 0, switch 0 in tree */ - - port@0 { - reg = <0>; - label = "lan4"; - }; - - port@1 { - reg = <1>; - label = "lan3"; - }; - - port@2 { - reg = <2>; - label = "lan2"; - }; - - port@3 { - reg = <3>; - label = "lan1"; - }; - - port@4 { - reg = <4>; - label = "wan"; - }; - - port@6 { - reg = <6>; - label = "cpu"; - }; - }; - }; }; &mdio { diff --git a/dts/src/arm/kirkwood-linksys-viper.dts b/dts/src/arm/kirkwood-linksys-viper.dts index a7d659b714..2f9660f3b4 100644 --- a/dts/src/arm/kirkwood-linksys-viper.dts +++ b/dts/src/arm/kirkwood-linksys-viper.dts @@ -66,53 +66,6 @@ gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; }; }; - - dsa { - status = "disabled"; - - compatible = "marvell,dsa"; - #address-cells = <2>; - #size-cells = <0>; - - dsa,ethernet = <ð0port>; - dsa,mii-bus = <&mdio>; - - switch@16,0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <16 0>; /* MDIO address 16, switch 0 in tree */ - - port@0 { - reg = <0>; - label = "ethernet1"; - }; - - port@1 { - reg = <1>; - label = "ethernet2"; - }; - - port@2 { - reg = <2>; - label = "ethernet3"; - }; - - port@3 { - reg = <3>; - label = "ethernet4"; - }; - - port@4 { - reg = <4>; - label = "internet"; - }; - - port@5 { - reg = <5>; - label = "cpu"; - }; - }; - }; }; &pinctrl { diff --git a/dts/src/arm/kirkwood-mv88f6281gtw-ge.dts b/dts/src/arm/kirkwood-mv88f6281gtw-ge.dts index 86d532916d..2e1a753489 100644 --- a/dts/src/arm/kirkwood-mv88f6281gtw-ge.dts +++ b/dts/src/arm/kirkwood-mv88f6281gtw-ge.dts @@ -107,53 +107,6 @@ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; }; }; - - dsa { - status = "disabled"; - - compatible = "marvell,dsa"; - #address-cells = <1>; - #size-cells = <0>; - - dsa,ethernet = <ð0port>; - dsa,mii-bus = <&mdio>; - - switch@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0 0>; /* MDIO address 0, switch 0 in tree */ - - port@0 { - reg = <0>; - label = "lan1"; - }; - - port@1 { - reg = <1>; - label = "lan2"; - }; - - port@2 { - reg = <2>; - label = "lan3"; - }; - - port@3 { - reg = <3>; - label = "lan4"; - }; - - port@4 { - reg = <4>; - label = "wan"; - }; - - port@5 { - reg = <5>; - label = "cpu"; - }; - }; - }; }; &mdio { diff --git a/dts/src/arm/kirkwood-rd88f6281-z0.dts b/dts/src/arm/kirkwood-rd88f6281-z0.dts index a9fee2c2bc..9d88301daf 100644 --- a/dts/src/arm/kirkwood-rd88f6281-z0.dts +++ b/dts/src/arm/kirkwood-rd88f6281-z0.dts @@ -16,15 +16,6 @@ model = "Marvell RD88f6281 Reference design, with Z0 SoC"; compatible = "marvell,rd88f6281-z0", "marvell,rd88f6281","marvell,kirkwood-88f6281", "marvell,kirkwood"; - dsa { - switch@0 { - reg = <0 0>; /* MDIO address 0, switch 0 in tree */ - port@4 { - reg = <4>; - label = "wan"; - }; - }; - }; }; ð1 { diff --git a/dts/src/arm/kirkwood-rd88f6281.dtsi b/dts/src/arm/kirkwood-rd88f6281.dtsi index 0f22f0e6f5..f1f8eee132 100644 --- a/dts/src/arm/kirkwood-rd88f6281.dtsi +++ b/dts/src/arm/kirkwood-rd88f6281.dtsi @@ -48,47 +48,6 @@ cd-gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>; /* No WP GPIO */ }; - }; - - dsa { - status = "disabled"; - - compatible = "marvell,dsa"; - #address-cells = <2>; - #size-cells = <0>; - - dsa,ethernet = <ð0port>; - dsa,mii-bus = <&mdio>; - - switch@0 { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - label = "lan1"; - }; - - port@1 { - reg = <1>; - label = "lan2"; - }; - - port@2 { - reg = <2>; - label = "lan3"; - }; - - port@3 { - reg = <3>; - label = "lan4"; - }; - - port@5 { - reg = <5>; - label = "cpu"; - }; - }; }; }; diff --git a/dts/src/arm/kirkwood.dtsi b/dts/src/arm/kirkwood.dtsi index 81c7eda2c4..2161e23bd9 100644 --- a/dts/src/arm/kirkwood.dtsi +++ b/dts/src/arm/kirkwood.dtsi @@ -1,11 +1,12 @@ // SPDX-License-Identifier: GPL-2.0 -/include/ "skeleton.dtsi" #include <dt-bindings/input/input.h> #include <dt-bindings/gpio/gpio.h> #define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16)) / { + #address-cells = <1>; + #size-cells = <1>; compatible = "marvell,kirkwood"; interrupt-parent = <&intc>; diff --git a/dts/src/arm/lpc3250-ea3250.dts b/dts/src/arm/lpc3250-ea3250.dts index 58ea0a4e7a..f46a11827e 100644 --- a/dts/src/arm/lpc3250-ea3250.dts +++ b/dts/src/arm/lpc3250-ea3250.dts @@ -17,64 +17,70 @@ / { model = "Embedded Artists LPC3250 board based on NXP LPC3250"; compatible = "ea,ea3250", "nxp,lpc3250"; - #address-cells = <1>; - #size-cells = <1>; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x4000000>; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; autorepeat; - button@21 { + + button { label = "Interrupt Key"; linux,code = <103>; gpios = <&gpio 4 1 0>; /* GPI_P3 1 */ }; + key1 { label = "KEY1"; linux,code = <1>; gpios = <&pca9532 0 0>; }; + key2 { label = "KEY2"; linux,code = <2>; gpios = <&pca9532 1 0>; }; + key3 { label = "KEY3"; linux,code = <3>; gpios = <&pca9532 2 0>; }; + key4 { label = "KEY4"; linux,code = <4>; gpios = <&pca9532 3 0>; }; + joy0 { label = "Joystick Key 0"; linux,code = <10>; gpios = <&gpio 2 0 0>; /* P2.0 */ }; + joy1 { label = "Joystick Key 1"; linux,code = <11>; gpios = <&gpio 2 1 0>; /* P2.1 */ }; + joy2 { label = "Joystick Key 2"; linux,code = <12>; gpios = <&gpio 2 2 0>; /* P2.2 */ }; + joy3 { label = "Joystick Key 3"; linux,code = <13>; gpios = <&gpio 2 3 0>; /* P2.3 */ }; + joy4 { label = "Joystick Key 4"; linux,code = <14>; diff --git a/dts/src/arm/lpc3250-phy3250.dts b/dts/src/arm/lpc3250-phy3250.dts index 1e1c2f517a..ebd19258e2 100644 --- a/dts/src/arm/lpc3250-phy3250.dts +++ b/dts/src/arm/lpc3250-phy3250.dts @@ -1,6 +1,7 @@ /* * PHYTEC phyCORE-LPC3250 board * + * Copyright (C) 2015-2019 Vladimir Zapolskiy <vz@mleia.com> * Copyright 2012 Roland Stigge <stigge@antcom.de> * * The code contained herein is licensed under the GNU General Public @@ -17,45 +18,12 @@ / { model = "PHYTEC phyCORE-LPC3250 board based on NXP LPC3250"; compatible = "phytec,phy3250", "nxp,lpc3250"; - #address-cells = <1>; - #size-cells = <1>; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x4000000>; }; - regulators { - backlight_reg: regulator@0 { - compatible = "regulator-fixed"; - regulator-name = "backlight_reg"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - gpio = <&gpio 5 4 0>; - enable-active-high; - regulator-boot-on; - }; - - lcd_reg: regulator@1 { - compatible = "regulator-fixed"; - regulator-name = "lcd_reg"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - gpio = <&gpio 5 0 0>; - enable-active-high; - regulator-boot-on; - }; - - sd_reg: regulator@2 { - compatible = "regulator-fixed"; - regulator-name = "sd_reg"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - gpio = <&gpio 5 5 0>; - enable-active-high; - }; - }; - leds { compatible = "gpio-leds"; @@ -69,10 +37,59 @@ linux,default-trigger = "heartbeat"; }; }; + + panel: panel { + compatible = "sharp,lq035q7db03"; + power-supply = <®_lcd>; + + port { + panel_input: endpoint { + remote-endpoint = <&cldc_output>; + }; + }; + }; + + reg_backlight: regulator-backlight { + compatible = "regulator-fixed"; + regulator-name = "backlight"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio 5 4 0>; + enable-active-high; + regulator-boot-on; + }; + + reg_lcd: regulator-lcd { + compatible = "regulator-fixed"; + regulator-name = "lcd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio 5 0 0>; + enable-active-high; + regulator-boot-on; + }; + + reg_sd: regulator-sd { + compatible = "regulator-fixed"; + regulator-name = "sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio 5 5 0>; + enable-active-high; + regulator-boot-on; + }; }; &clcd { + max-memory-bandwidth = <18710000>; status = "okay"; + + port { + cldc_output: endpoint { + remote-endpoint = <&panel_input>; + arm,pl11x,tft-r0g0b0-pads = <0 8 16>; + }; + }; }; &i2c1 { @@ -130,7 +147,7 @@ cd-gpios = <&gpio 3 1 0>; cd-inverted; bus-width = <4>; - vmmc-supply = <&sd_reg>; + vmmc-supply = <®_sd>; status = "okay"; }; diff --git a/dts/src/arm/lpc32xx.dtsi b/dts/src/arm/lpc32xx.dtsi index b7303a4e42..20b38f4ade 100644 --- a/dts/src/arm/lpc32xx.dtsi +++ b/dts/src/arm/lpc32xx.dtsi @@ -11,12 +11,12 @@ * http://www.gnu.org/copyleft/gpl.html */ -#include "skeleton.dtsi" - #include <dt-bindings/clock/lpc32xx-clock.h> #include <dt-bindings/interrupt-controller/irq.h> / { + #address-cells = <1>; + #size-cells = <1>; compatible = "nxp,lpc3220"; interrupt-parent = <&mic>; @@ -139,11 +139,11 @@ }; clcd: clcd@31040000 { - compatible = "arm,pl110", "arm,primecell"; + compatible = "arm,pl111", "arm,primecell"; reg = <0x31040000 0x1000>; interrupts = <14 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk LPC32XX_CLK_LCD>; - clock-names = "apb_pclk"; + clocks = <&clk LPC32XX_CLK_LCD>, <&clk LPC32XX_CLK_LCD>; + clock-names = "clcdclk", "apb_pclk"; status = "disabled"; }; @@ -230,7 +230,7 @@ status = "disabled"; }; - i2s1: i2s@2009C000 { + i2s1: i2s@2009c000 { compatible = "nxp,lpc3220-i2s"; reg = <0x2009C000 0x1000>; }; @@ -273,7 +273,7 @@ status = "disabled"; }; - i2c1: i2c@400A0000 { + i2c1: i2c@400a0000 { compatible = "nxp,pnx-i2c"; reg = <0x400A0000 0x100>; interrupt-parent = <&sic1>; @@ -284,7 +284,7 @@ clocks = <&clk LPC32XX_CLK_I2C1>; }; - i2c2: i2c@400A8000 { + i2c2: i2c@400a8000 { compatible = "nxp,pnx-i2c"; reg = <0x400A8000 0x100>; interrupt-parent = <&sic1>; @@ -295,7 +295,7 @@ clocks = <&clk LPC32XX_CLK_I2C2>; }; - mpwm: mpwm@400E8000 { + mpwm: mpwm@400e8000 { compatible = "nxp,lpc3220-motor-pwm"; reg = <0x400E8000 0x78>; status = "disabled"; @@ -394,7 +394,7 @@ #gpio-cells = <3>; /* bank, pin, flags */ }; - timer4: timer@4002C000 { + timer4: timer@4002c000 { compatible = "nxp,lpc3220-timer"; reg = <0x4002C000 0x1000>; interrupts = <3 IRQ_TYPE_LEVEL_LOW>; @@ -412,7 +412,7 @@ status = "disabled"; }; - watchdog: watchdog@4003C000 { + watchdog: watchdog@4003c000 { compatible = "nxp,pnx4008-wdt"; reg = <0x4003C000 0x1000>; clocks = <&clk LPC32XX_CLK_WDOG>; @@ -451,7 +451,7 @@ status = "disabled"; }; - timer1: timer@4004C000 { + timer1: timer@4004c000 { compatible = "nxp,lpc3220-timer"; reg = <0x4004C000 0x1000>; interrupts = <17 IRQ_TYPE_LEVEL_LOW>; @@ -462,7 +462,9 @@ key: key@40050000 { compatible = "nxp,lpc3220-key"; reg = <0x40050000 0x1000>; - interrupts = <54 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk LPC32XX_CLK_KEY>; + interrupt-parent = <&sic1>; + interrupts = <22 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -475,7 +477,7 @@ status = "disabled"; }; - pwm1: pwm@4005C000 { + pwm1: pwm@4005c000 { compatible = "nxp,lpc3220-pwm"; reg = <0x4005C000 0x4>; clocks = <&clk LPC32XX_CLK_PWM1>; @@ -484,7 +486,7 @@ status = "disabled"; }; - pwm2: pwm@4005C004 { + pwm2: pwm@4005c004 { compatible = "nxp,lpc3220-pwm"; reg = <0x4005C004 0x4>; clocks = <&clk LPC32XX_CLK_PWM2>; diff --git a/dts/src/arm/lpc4350-hitex-eval.dts b/dts/src/arm/lpc4350-hitex-eval.dts index 8b973f537d..93d0c2e99e 100644 --- a/dts/src/arm/lpc4350-hitex-eval.dts +++ b/dts/src/arm/lpc4350-hitex-eval.dts @@ -40,8 +40,6 @@ pca_buttons { compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; poll-interval = <100>; autorepeat; diff --git a/dts/src/arm/lpc4357-ea4357-devkit.dts b/dts/src/arm/lpc4357-ea4357-devkit.dts index 02b23fa29d..224f80a4a3 100644 --- a/dts/src/arm/lpc4357-ea4357-devkit.dts +++ b/dts/src/arm/lpc4357-ea4357-devkit.dts @@ -57,8 +57,6 @@ compatible = "gpio-keys-polled"; pinctrl-names = "default"; pinctrl-0 = <&gpio_joystick_pins>; - #address-cells = <1>; - #size-cells = <0>; poll-interval = <100>; autorepeat; diff --git a/dts/src/arm/lpc4357-myd-lpc4357.dts b/dts/src/arm/lpc4357-myd-lpc4357.dts new file mode 100644 index 0000000000..1f84654df5 --- /dev/null +++ b/dts/src/arm/lpc4357-myd-lpc4357.dts @@ -0,0 +1,619 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * MYIR Tech MYD-LPC4357 Development Board with 800x480 7" TFT panel + * + * Copyright (C) 2016-2018 Vladimir Zapolskiy <vz@mleia.com> + */ + +/dts-v1/; + +#include "lpc18xx.dtsi" +#include "lpc4357.dtsi" + +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "MYIR Tech LPC4357 Development Board"; + compatible = "myir,myd-lpc4357", "nxp,lpc4357"; + + chosen { + stdout-path = "serial3:115200n8"; + }; + + memory@28000000 { + device_type = "memory"; + reg = <0x28000000 0x2000000>; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins>; + + led1 { + gpios = <&gpio LPC_GPIO(6,15) GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led2 { + gpios = <&gpio LPC_GPIO(6,16) GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led3 { + gpios = <&gpio LPC_GPIO(6,17) GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led4 { + gpios = <&gpio LPC_GPIO(6,10) GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led5 { + gpios = <&gpio LPC_GPIO(7,14) GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led6 { + gpios = <&gpio LPC_GPIO(6,14) GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + }; + + panel: panel { + compatible = "innolux,at070tn92"; + + port { + panel_input: endpoint { + remote-endpoint = <&lcdc_output>; + }; + }; + }; + + vcc: vcc_fixed { + compatible = "regulator-fixed"; + regulator-name = "vcc-supply"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vmmc: vmmc_fixed { + compatible = "regulator-fixed"; + regulator-name = "vmmc-supply"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&pinctrl { + can0_pins: can0-pins { + can_rd_cfg { + pins = "p3_1"; + function = "can0"; + input-enable; + }; + + can_td_cfg { + pins = "p3_2"; + function = "can0"; + }; + }; + + can1_pins: can1-pins { + can_rd_cfg { + pins = "pe_1"; + function = "can1"; + input-enable; + }; + + can_td_cfg { + pins = "pe_0"; + function = "can1"; + }; + }; + + emc_pins: emc-pins { + emc_addr0_22_cfg { + pins = "p2_9", "p2_10", "p2_11", "p2_12", + "p2_13", "p1_0", "p1_1", "p1_2", + "p2_8", "p2_7", "p2_6", "p2_2", + "p2_1", "p2_0", "p6_8", "p6_7", + "pd_16", "pd_15", "pe_0", "pe_1", + "pe_2", "pe_3", "pe_4"; + function = "emc"; + slew-rate = <1>; + bias-disable; + }; + + emc_data0_15_cfg { + pins = "p1_7", "p1_8", "p1_9", "p1_10", + "p1_11", "p1_12", "p1_13", "p1_14", + "p5_4", "p5_5", "p5_6", "p5_7", + "p5_0", "p5_1", "p5_2", "p5_3"; + function = "emc"; + input-enable; + input-schmitt-disable; + slew-rate = <1>; + bias-disable; + }; + + emc_we_oe_cfg { + pins = "p1_6", "p1_3"; + function = "emc"; + slew-rate = <1>; + bias-disable; + }; + + emc_cs0_cfg { + pins = "p1_5"; + function = "emc"; + slew-rate = <1>; + bias-disable; + }; + + emc_sdram_dqm0_1_cfg { + pins = "p6_12", "p6_10"; + function = "emc"; + slew-rate = <1>; + bias-disable; + }; + + emc_sdram_ras_cas_cfg { + pins = "p6_5", "p6_4"; + function = "emc"; + slew-rate = <1>; + bias-disable; + }; + + emc_sdram_dycs0_cfg { + pins = "p6_9"; + function = "emc"; + slew-rate = <1>; + bias-disable; + }; + + emc_sdram_cke_cfg { + pins = "p6_11"; + function = "emc"; + slew-rate = <1>; + bias-disable; + }; + + emc_sdram_clock_cfg { + pins = "clk0"; + function = "emc"; + input-enable; + input-schmitt-disable; + slew-rate = <1>; + bias-disable; + }; + }; + + enet_rmii_pins: enet-rmii-pins { + enet_rmii_rxd_cfg { + pins = "p1_15", "p0_0"; + function = "enet"; + input-enable; + input-schmitt-disable; + slew-rate = <1>; + bias-disable; + }; + + enet_rmii_txd_cfg { + pins = "p1_18", "p1_20"; + function = "enet"; + slew-rate = <1>; + bias-disable; + }; + + enet_rmii_rx_dv_cfg { + pins = "p1_16"; + function = "enet"; + input-enable; + input-schmitt-disable; + bias-disable; + }; + + enet_mdio_cfg { + pins = "p1_17"; + function = "enet"; + input-enable; + input-schmitt-disable; + bias-disable; + }; + + enet_mdc_cfg { + pins = "pc_1"; + function = "enet"; + slew-rate = <1>; + bias-disable; + }; + + enet_rmii_tx_en_cfg { + pins = "p0_1"; + function = "enet"; + bias-disable; + }; + + enet_ref_clk_cfg { + pins = "p1_19"; + function = "enet"; + slew-rate = <1>; + input-enable; + input-schmitt-disable; + bias-disable; + }; + }; + + i2c0_pins: i2c0-pins { + i2c0_pins_cfg { + pins = "i2c0_scl", "i2c0_sda"; + function = "i2c0"; + input-enable; + }; + }; + + i2c1_pins: i2c1-pins { + i2c1_pins_cfg { + pins = "pe_15", "pe_13"; + function = "i2c1"; + input-enable; + }; + }; + + lcd_pins: lcd-pins { + lcd_vd0_23_cfg { + pins = "p4_1", "p4_4", "p4_3", "p4_2", + "p8_7", "p8_6", "p8_5", "p8_4", + "p7_5", "p4_8", "p4_10", "p4_9", + "p8_3", "pb_6", "pb_5", "pb_4", + "p7_4", "p7_3", "p7_2", "p7_1", + "pb_3", "pb_2", "pb_1", "pb_0"; + function = "lcd"; + }; + + lcd_vsync_en_dclk_lp_pwr_cfg { + pins = "p4_5", "p4_6", "p4_7", "p7_6", "p7_7"; + function = "lcd"; + }; + }; + + led_pins: led-pins { + led_1_6_cfg { + pins = "pd_1", "pd_2", "pd_3", "pc_11", "pe_14", "pd_0"; + function = "gpio"; + bias-pull-down; + }; + }; + + sdmmc_pins: sdmmc-pins { + sdmmc_clk_cfg { + pins = "pc_0"; + function = "sdmmc"; + slew-rate = <1>; + bias-pull-down; + }; + + sdmmc_cmd_dat0_3_cfg { + pins = "pc_4", "pc_5", "pc_6", "pc_7", "pc_10"; + function = "sdmmc"; + input-enable; + input-schmitt-disable; + slew-rate = <1>; + bias-disable; + }; + + sdmmc_cd_cfg { + pins = "pc_8"; + function = "sdmmc"; + input-enable; + bias-pull-down; + }; + }; + + spifi_pins: spifi-pins { + spifi_sck_cfg { + pins = "p3_3"; + function = "spifi"; + input-enable; + input-schmitt-disable; + slew-rate = <1>; + bias-disable; + }; + + spifi_mosi_miso_sio2_sio3_cfg { + pins = "p3_7", "p3_6", "p3_5", "p3_4"; + function = "spifi"; + input-enable; + input-schmitt-disable; + slew-rate = <1>; + bias-disable; + }; + + spifi_cs_cfg { + pins = "p3_8"; + function = "spifi"; + bias-disable; + }; + }; + + ssp1_pins: ssp1-pins { + ssp1_sck_cfg { + pins = "pf_4"; + function = "ssp1"; + slew-rate = <1>; + bias-pull-down; + }; + + ssp1_miso_cfg { + pins = "pf_6"; + function = "ssp1"; + input-enable; + input-schmitt-disable; + slew-rate = <1>; + bias-pull-down; + }; + + ssp1_mosi_cfg { + pins = "pf_7"; + function = "ssp1"; + slew-rate = <1>; + bias-pull-down; + }; + + ssp1_ssel_cfg { + pins = "pf_5"; + function = "gpio"; + bias-disable; + }; + }; + + uart0_pins: uart0-pins { + uart0_rxd_cfg { + pins = "pf_11"; + function = "uart0"; + input-enable; + input-schmitt-disable; + bias-disable; + }; + + uart0_clk_dir_txd_cfg { + pins = "pf_8", "pf_9", "pf_10"; + function = "uart0"; + bias-pull-down; + }; + }; + + uart1_pins: uart1-pins { + uart1_rxd_cfg { + pins = "pc_14"; + function = "uart1"; + bias-disable; + input-enable; + input-schmitt-disable; + }; + + uart1_dtr_txd_cfg { + pins = "pc_12", "pc_13"; + function = "uart1"; + bias-pull-down; + }; + }; + + uart2_pins: uart2-pins { + uart2_rxd_cfg { + pins = "pa_2"; + function = "uart2"; + bias-disable; + input-enable; + input-schmitt-disable; + }; + + uart2_txd_cfg { + pins = "pa_1"; + function = "uart2"; + bias-pull-down; + }; + }; + + uart3_pins: uart3-pins { + uart3_rx_cfg { + pins = "p2_4"; + function = "uart3"; + bias-disable; + input-enable; + input-schmitt-disable; + }; + + uart3_tx_cfg { + pins = "p2_3"; + function = "uart3"; + bias-pull-down; + }; + }; + + usb0_pins: usb0-pins { + usb0_pwr_enable_cfg { + pins = "p6_3"; + function = "usb0"; + }; + + usb0_pwr_fault_cfg { + pins = "p8_0"; + function = "usb0"; + bias-disable; + input-enable; + }; + }; +}; + +&adc1 { + status = "okay"; + vref-supply = <&vcc>; +}; + +&can0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&can0_pins>; +}; + +/* Pin conflict with EMC, muxed by JP5 and JP6 */ +&can1 { + status = "disabled"; + pinctrl-names = "default"; + pinctrl-0 = <&can1_pins>; +}; + +&emc { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&emc_pins>; + + cs0 { + #address-cells = <2>; + #size-cells = <1>; + ranges; + + mpmc,cs = <0>; + mpmc,memory-width = <16>; + mpmc,byte-lane-low; + mpmc,write-enable-delay = <0>; + mpmc,output-enable-delay = <0>; + mpmc,read-access-delay = <70>; + mpmc,page-mode-read-delay = <70>; + + /* SST/Microchip SST39VF1601 */ + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x400000>; + bank-width = <2>; + }; + }; +}; + +&enet_tx_clk { + clock-frequency = <50000000>; +}; + +&i2c0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + clock-frequency = <400000>; +}; + +&i2c1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + clock-frequency = <400000>; + + sensor@49 { + compatible = "lm75"; + reg = <0x49>; + }; + + eeprom@50 { + compatible = "atmel,24c512"; + reg = <0x50>; + }; +}; + +&lcdc { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&lcd_pins>; + + max-memory-bandwidth = <92240000>; + + port { + lcdc_output: endpoint { + remote-endpoint = <&panel_input>; + arm,pl11x,tft-r0g0b0-pads = <0 8 16>; + }; + }; +}; + +&mac { + status = "okay"; + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&enet_rmii_pins>; + phy-handle = <&phy1>; + + mdio0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; + }; +}; + +&mmcsd { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_pins>; + bus-width = <4>; + vmmc-supply = <&vmmc>; +}; + +/* Pin conflict with SSP0, the latter is routed to J17 pin header */ +&spifi { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&spifi_pins>; + + /* Atmel AT25DF321A */ + flash { + compatible = "jedec,spi-nor"; + spi-max-frequency = <51000000>; + spi-cpol; + spi-cpha; + }; +}; + +&ssp1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&ssp1_pins>; + num-cs = <1>; + cs-gpios = <&gpio LPC_GPIO(7,19) GPIO_ACTIVE_LOW>; +}; + +/* Routed to J17 pin header */ +&uart0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; +}; + +/* RS485 */ +&uart1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; +}; + +/* Routed to J17 pin header */ +&uart2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; +}; + +&uart3 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>; +}; + +&usb0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&usb0_pins>; +}; diff --git a/dts/src/arm/ls1021a-moxa-uc-8410a.dts b/dts/src/arm/ls1021a-moxa-uc-8410a.dts index 6a83f30029..ba1ddd93b8 100644 --- a/dts/src/arm/ls1021a-moxa-uc-8410a.dts +++ b/dts/src/arm/ls1021a-moxa-uc-8410a.dts @@ -18,6 +18,7 @@ / { model = "Moxa UC-8410A"; + compatible = "fsl,ls1021a-moxa-uc-8410a", "fsl,ls1021a"; aliases { enet0_rgmii_phy = &rgmii_phy0; diff --git a/dts/src/arm/ls1021a-qds.dts b/dts/src/arm/ls1021a-qds.dts index 923a257605..ca60730dda 100644 --- a/dts/src/arm/ls1021a-qds.dts +++ b/dts/src/arm/ls1021a-qds.dts @@ -51,6 +51,7 @@ / { model = "LS1021A QDS Board"; + compatible = "fsl,ls1021a-qds", "fsl,ls1021a"; aliases { enet0_rgmii_phy = &rgmii_phy1; diff --git a/dts/src/arm/ls1021a-twr.dts b/dts/src/arm/ls1021a-twr.dts index 8b48c3c7cd..97e1fb7ea9 100644 --- a/dts/src/arm/ls1021a-twr.dts +++ b/dts/src/arm/ls1021a-twr.dts @@ -51,6 +51,7 @@ / { model = "LS1021A TWR Board"; + compatible = "fsl,ls1021a-twr", "fsl,ls1021a"; aliases { enet2_rgmii_phy = &rgmii_phy1; diff --git a/dts/src/arm/ls1021a.dtsi b/dts/src/arm/ls1021a.dtsi index ed09412921..b4f2723ecd 100644 --- a/dts/src/arm/ls1021a.dtsi +++ b/dts/src/arm/ls1021a.dtsi @@ -45,11 +45,12 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -#include "skeleton64.dtsi" #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/thermal/thermal.h> / { + #address-cells = <2>; + #size-cells = <2>; compatible = "fsl,ls1021a"; interrupt-parent = <&gic>; @@ -88,6 +89,11 @@ }; }; + memory { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x0>; + }; + sysclk: sysclk { compatible = "fixed-clock"; #clock-cells = <0>; @@ -125,6 +131,13 @@ interrupt-parent = <&gic>; ranges; + ddr: memory-controller@1080000 { + compatible = "fsl,qoriq-memory-controller"; + reg = <0x0 0x1080000 0x0 0x1000>; + interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>; + big-endian; + }; + gic: interrupt-controller@1400000 { compatible = "arm,gic-400", "arm,cortex-a7-gic"; #interrupt-cells = <3>; @@ -706,6 +719,7 @@ fsl,tmr-fiper1 = <999999995>; fsl,tmr-fiper2 = <99990>; fsl,max-adj = <499999999>; + fsl,extts-fifo; }; enet0: ethernet@2d10000 { @@ -811,6 +825,7 @@ dr_mode = "host"; snps,quirk-frame-length-adjustment = <0x20>; snps,dis_rxdet_inp3_quirk; + snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; }; pcie@3400000 { @@ -824,6 +839,7 @@ #size-cells = <2>; device_type = "pci"; num-lanes = <4>; + num-viewport = <6>; bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000 /* downstream I/O */ 0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ @@ -848,6 +864,7 @@ #size-cells = <2>; device_type = "pci"; num-lanes = <4>; + num-viewport = <6>; bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000 /* downstream I/O */ 0x82000000 0x0 0x40000000 0x48 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ diff --git a/dts/src/arm/meson.dtsi b/dts/src/arm/meson.dtsi index 2ab74860d9..6f54a88975 100644 --- a/dts/src/arm/meson.dtsi +++ b/dts/src/arm/meson.dtsi @@ -47,9 +47,10 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> -/include/ "skeleton.dtsi" / { + #address-cells = <1>; + #size-cells = <1>; interrupt-parent = <&gic>; L2: l2-cache-controller@c4200000 { @@ -72,6 +73,13 @@ #size-cells = <1>; ranges = <0x0 0xc1100000 0x200000>; + hhi: system-controller@4000 { + compatible = "amlogic,meson-hhi-sysctrl", + "simple-mfd", + "syscon"; + reg = <0x4000 0x400>; + }; + assist: assist@7c00 { compatible = "amlogic,meson-mx-assist", "syscon"; reg = <0x7c00 0x200>; diff --git a/dts/src/arm/meson6-atv1200.dts b/dts/src/arm/meson6-atv1200.dts index fc48cff71d..997e69c596 100644 --- a/dts/src/arm/meson6-atv1200.dts +++ b/dts/src/arm/meson6-atv1200.dts @@ -61,6 +61,7 @@ }; memory { + device_type = "memory"; reg = <0x40000000 0x80000000>; }; }; diff --git a/dts/src/arm/meson6.dtsi b/dts/src/arm/meson6.dtsi index ca978ab952..6558525591 100644 --- a/dts/src/arm/meson6.dtsi +++ b/dts/src/arm/meson6.dtsi @@ -70,6 +70,14 @@ }; }; + apb2: bus@d0000000 { + compatible = "simple-bus"; + reg = <0xd0000000 0x40000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xd0000000 0x40000>; + }; + xtal: xtal-clk { compatible = "fixed-clock"; clock-frequency = <24000000>; diff --git a/dts/src/arm/meson8-minix-neo-x8.dts b/dts/src/arm/meson8-minix-neo-x8.dts index 55fb090a40..8686abd5de 100644 --- a/dts/src/arm/meson8-minix-neo-x8.dts +++ b/dts/src/arm/meson8-minix-neo-x8.dts @@ -57,6 +57,7 @@ }; memory { + device_type = "memory"; reg = <0x40000000 0x80000000>; }; diff --git a/dts/src/arm/meson8.dtsi b/dts/src/arm/meson8.dtsi index e5cd325d7e..a978124345 100644 --- a/dts/src/arm/meson8.dtsi +++ b/dts/src/arm/meson8.dtsi @@ -166,6 +166,32 @@ }; }; + gpu_opp_table: gpu-opp-table { + compatible = "operating-points-v2"; + + opp-182150000 { + opp-hz = /bits/ 64 <182150000>; + opp-microvolt = <1150000>; + }; + opp-318750000 { + opp-hz = /bits/ 64 <318750000>; + opp-microvolt = <1150000>; + }; + opp-425000000 { + opp-hz = /bits/ 64 <425000000>; + opp-microvolt = <1150000>; + }; + opp-510000000 { + opp-hz = /bits/ 64 <510000000>; + opp-microvolt = <1150000>; + }; + opp-637500000 { + opp-hz = /bits/ 64 <637500000>; + opp-microvolt = <1150000>; + turbo-mode; + }; + }; + pmu { compatible = "arm,cortex-a9-pmu"; interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, @@ -201,6 +227,46 @@ no-map; }; }; + + apb: bus@d0000000 { + compatible = "simple-bus"; + reg = <0xd0000000 0x200000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xd0000000 0x200000>; + + mali: gpu@c0000 { + compatible = "amlogic,meson8-mali", "arm,mali-450"; + reg = <0xc0000 0x40000>; + interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "gp", "gpmmu", "pp", "pmu", + "pp0", "ppmmu0", "pp1", "ppmmu1", + "pp2", "ppmmu2", "pp4", "ppmmu4", + "pp5", "ppmmu5", "pp6", "ppmmu6"; + resets = <&reset RESET_MALI>; + clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>; + clock-names = "bus", "core"; + operating-points-v2 = <&gpu_opp_table>; + switch-delay = <0xffff>; + }; + }; }; /* end of / */ &aobus { @@ -261,13 +327,6 @@ }; &cbus { - clkc: clock-controller@4000 { - #clock-cells = <1>; - #reset-cells = <1>; - compatible = "amlogic,meson8-clkc"; - reg = <0x8000 0x4>, <0x4000 0x400>; - }; - reset: reset-controller@4404 { compatible = "amlogic,meson8b-reset"; reg = <0x4404 0x9c>; @@ -390,6 +449,11 @@ compatible = "amlogic,meson8-efuse"; clocks = <&clkc CLKID_EFUSE>; clock-names = "core"; + + temperature_calib: calib@1f4 { + /* only the upper two bytes are relevant */ + reg = <0x1f4 0x4>; + }; }; ðmac { @@ -402,6 +466,14 @@ status = "okay"; }; +&hhi { + clkc: clock-controller { + compatible = "amlogic,meson8-clkc"; + #clock-cells = <1>; + #reset-cells = <1>; + }; +}; + &hwrng { compatible = "amlogic,meson8-rng", "amlogic,meson-rng"; clocks = <&clkc CLKID_RNG0>; @@ -469,6 +541,9 @@ clocks = <&clkc CLKID_XTAL>, <&clkc CLKID_SAR_ADC>; clock-names = "clkin", "core"; + amlogic,hhi-sysctrl = <&hhi>; + nvmem-cells = <&temperature_calib>; + nvmem-cell-names = "temperature_calib"; }; &sdio { diff --git a/dts/src/arm/meson8b-ec100.dts b/dts/src/arm/meson8b-ec100.dts index d50fc2f60f..3ca9638fad 100644 --- a/dts/src/arm/meson8b-ec100.dts +++ b/dts/src/arm/meson8b-ec100.dts @@ -23,6 +23,7 @@ }; memory { + device_type = "memory"; reg = <0x40000000 0x40000000>; }; @@ -64,6 +65,11 @@ timeout-ms = <20000>; }; + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&saradc 8>; + }; + leds { compatible = "gpio-leds"; @@ -83,6 +89,9 @@ }; usb_vbus: regulator-usb-vbus { + /* + * Silergy SY6288CCAC-GP 2A Power Distribution Switch. + */ compatible = "regulator-fixed"; regulator-name = "USB_VBUS"; @@ -90,11 +99,20 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; + vin-supply = <&vcc_5v>; + + /* + * signal name from the schematics: USB_PWR_EN + */ gpio = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>; enable-active-high; }; vcc_5v: regulator-vcc5v { + /* + * supplied by the main power input which called PWR_5V_STB + * in the schematics + */ compatible = "regulator-fixed"; regulator-name = "VCC5V"; @@ -102,6 +120,9 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; + /* + * signal name from the schematics: 3V3_5V_EN + */ gpio = <&gpio GPIODV_29 GPIO_ACTIVE_LOW>; regulator-boot-on; @@ -109,12 +130,18 @@ }; vcck: regulator-vcck { + /* + * Silergy SY8089AAC-GP 2A continuous, 3A peak, 1MHz + * Synchronous Step Down Regulator. + */ compatible = "pwm-regulator"; regulator-name = "VCCK"; regulator-min-microvolt = <860000>; regulator-max-microvolt = <1140000>; + vin-supply = <&vcc_5v>; + pwms = <&pwm_cd 0 1148 0>; pwm-dutycycle-range = <100 0>; @@ -123,19 +150,66 @@ }; vcc_1v8: regulator-vcc1v8 { + /* + * ABLIC S-1339D18-M5001-GP + */ compatible = "regulator-fixed"; regulator-name = "VCC1V8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + + vin-supply = <&vcc_3v3>; }; vcc_3v3: regulator-vcc3v3 { + /* + * Silergy SY8089AAC-GP 2A continuous, 3A peak, 1MHz + * Synchronous Step Down Regulator. Also called + * VDDIO_AO3.3V in the schematics. + */ compatible = "regulator-fixed"; regulator-name = "VCC3V3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + + vin-supply = <&vcc_5v>; + }; + + vcc_ddr3: regulator-vcc-ddr3 { + /* + * Silergy SY8089AAC-GP 2A continuous, 3A peak, 1MHz + * Synchronous Step Down Regulator. Also called + * DDR3_1.5V in the schematics. + */ + compatible = "regulator-fixed"; + + regulator-name = "VCC_DDR3_1V5"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + + vin-supply = <&vcc_5v>; + + regulator-boot-on; + regulator-always-on; + }; + + vcc_rtc: regulator-vcc-rtc { + /* + * Global Mixed-mode Technology Inc. G918T12U-GP + */ + compatible = "regulator-fixed"; + + regulator-name = "VCC_RTC"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + /* + * When the board is powered then the input is VCC3V3, + * otherwise power is taken from the coin cell battery. + */ + vin-supply = <&vcc_3v3>; }; }; @@ -164,6 +238,10 @@ eth_phy0: ethernet-phy@0 { /* IC Plus IP101A/G (0x02430c54) */ reg = <0>; + icplus,select-interrupt; + interrupt-parent = <&gpio_intc>; + /* GPIOH_3 */ + interrupts = <17 IRQ_TYPE_LEVEL_LOW>; }; }; }; @@ -211,6 +289,56 @@ }; }; +&gpio_ao { + gpio-line-names = "Linux_TX", "Linux_RX", + "SLP_S5_N", "USB2_OC_FLAG#", + "HUB_RST", "USB_PWR_EN", + "I2S_IN", "SLP_S1_N", + "TCK", "TMS", "TDI", "TDO", + "HDMI_CEC", "5640_IRQ", + "MUTE", "S805_TEST#"; +}; + +&gpio { + gpio-line-names = /* Bank GPIOX */ + "WIFI_SD_D0", "WIFI_SD_D1", "WIFI_SD_D2", + "WIFI_SD_D3", "BTPCM_DOUT", "BTPCM_DIN", + "BTPCM_SYNC", "BTPCM_CLK", "WIFI_SD_CLK", + "WIFI_SD_CMD", "WIFI_32K", "WIFI_PWREN", + "UART_B_TX", "UART_B_RX", "UART_B_CTS_N", + "UART_B_RTS_N", "BT_EN", "WIFI_WAKE_HOST", + /* Bank GPIOY */ + "", "", "", "", "", "", "", "", "", "", + "", "", + /* Bank GPIODV */ + "VCCK_PWM_C", "I2C_SDA_A", "I2C_SCL_A", + "I2C_SDA_B", "I2C_SCL_B", "VDDEE_PWM_D", + "VDDEE_PWM 3V3_5V_EN", + /* Bank GPIOH */ + "HDMI_HPD", "HDMI_I2C_SDA", "HDMI_I2C_SCL", + "RMII_IRQ", "RMII_RST#", "RMII_TXD1", + "RMII_TXD0", "AV_select_1", "AV_select_2", + "MCU_Control_S", + /* Bank CARD */ + "SD_D1_B", "SD_D0_B", "SD_CLK_8726MX", + "SD_CMD_8726MX", "SD_D3_B", "SD_D2_B", + "CARD_EN_DET (CARD_DET)", + /* Bank BOOT */ + "NAND_D0 (EMMC)", "NAND_D1 (EMMC)", + "NAND_D2 (EMMC)", "NAND_D3 (EMMC)", + "NAND_D4 (EMMC)", "NAND_D5 (EMMC)", + "NAND_D6 (EMMC)", "NAND_D7 (EMMC)", + "NAND_CS1 (EMMC)", "NAND_CS2 iNAND_RS1 (EMMC)", + "NAND_nR/B iNAND_CMD (EMMC)", "NAND_ALE (EMMC)", + "NAND_CLE (EMMC)", "nRE_S1 NAND_nRE (EMMC)", + "nWE_S1 NAND_nWE (EMMC)", "", "", "SPI_CS", + /* Bank DIF */ + "RMII_RXD1", "RMII_RXD0", "RMII_CRS_DV", + "RMII_50M_IN", "GPIODIF_4", "GPIODIF_5", + "RMII_TXEN", "CPUETH_25MOUT", "RMII_MDC", + "RMII_MDIO"; +}; + &pwm_cd { status = "okay"; pinctrl-0 = <&pwm_c1_pins>; diff --git a/dts/src/arm/meson8b-mxq.dts b/dts/src/arm/meson8b-mxq.dts index 5c9b76af8d..08ddd7fb0b 100644 --- a/dts/src/arm/meson8b-mxq.dts +++ b/dts/src/arm/meson8b-mxq.dts @@ -60,6 +60,7 @@ }; memory { + device_type = "memory"; reg = <0x40000000 0x40000000>; }; }; diff --git a/dts/src/arm/meson8b-odroidc1.dts b/dts/src/arm/meson8b-odroidc1.dts index 0f0a46ddf3..3b0e0f8fbc 100644 --- a/dts/src/arm/meson8b-odroidc1.dts +++ b/dts/src/arm/meson8b-odroidc1.dts @@ -62,6 +62,7 @@ }; memory { + device_type = "memory"; reg = <0x40000000 0x40000000>; }; @@ -118,6 +119,11 @@ 1800000 1>; }; + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&saradc 8>; + }; + vcc_1v8: regulator-vcc-1v8 { /* * RICHTEK RT9179 configured for a fixed output voltage of diff --git a/dts/src/arm/meson8b.dtsi b/dts/src/arm/meson8b.dtsi index 22d7754607..fe84a8c3ce 100644 --- a/dts/src/arm/meson8b.dtsi +++ b/dts/src/arm/meson8b.dtsi @@ -158,6 +158,32 @@ }; }; + gpu_opp_table: gpu-opp-table { + compatible = "operating-points-v2"; + + opp-255000000 { + opp-hz = /bits/ 64 <255000000>; + opp-microvolt = <1150000>; + }; + opp-364300000 { + opp-hz = /bits/ 64 <364300000>; + opp-microvolt = <1150000>; + }; + opp-425000000 { + opp-hz = /bits/ 64 <425000000>; + opp-microvolt = <1150000>; + }; + opp-510000000 { + opp-hz = /bits/ 64 <510000000>; + opp-microvolt = <1150000>; + }; + opp-637500000 { + opp-hz = /bits/ 64 <637500000>; + opp-microvolt = <1150000>; + turbo-mode; + }; + }; + pmu { compatible = "arm,cortex-a5-pmu"; interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, @@ -178,6 +204,34 @@ no-map; }; }; + + apb: bus@d0000000 { + compatible = "simple-bus"; + reg = <0xd0000000 0x200000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xd0000000 0x200000>; + + mali: gpu@c0000 { + compatible = "amlogic,meson8b-mali", "arm,mali-450"; + reg = <0xc0000 0x40000>; + interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "gp", "gpmmu", "pp", "pmu", + "pp0", "ppmmu0", "pp1", "ppmmu1"; + resets = <&reset RESET_MALI>; + clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>; + clock-names = "bus", "core"; + operating-points-v2 = <&gpu_opp_table>; + switch-delay = <0xffff>; + }; + }; }; /* end of / */ &aobus { @@ -222,13 +276,6 @@ }; &cbus { - clkc: clock-controller@4000 { - #clock-cells = <1>; - #reset-cells = <1>; - compatible = "amlogic,meson8b-clkc"; - reg = <0x8000 0x4>, <0x4000 0x400>; - }; - reset: reset-controller@4404 { compatible = "amlogic,meson8b-reset"; reg = <0x4404 0x9c>; @@ -270,9 +317,7 @@ groups = "eth_tx_clk", "eth_tx_en", "eth_txd1_0", - "eth_txd1_1", "eth_txd0_0", - "eth_txd0_1", "eth_rx_clk", "eth_rx_dv", "eth_rxd1", @@ -281,7 +326,9 @@ "eth_mdc", "eth_ref_clk", "eth_txd2", - "eth_txd3"; + "eth_txd3", + "eth_rxd3", + "eth_rxd2"; function = "ethernet"; bias-disable; }; @@ -360,6 +407,11 @@ compatible = "amlogic,meson8b-efuse"; clocks = <&clkc CLKID_EFUSE>; clock-names = "core"; + + temperature_calib: calib@1f4 { + /* only the upper two bytes are relevant */ + reg = <0x1f4 0x4>; + }; }; ðmac { @@ -383,6 +435,14 @@ status = "okay"; }; +&hhi { + clkc: clock-controller { + compatible = "amlogic,meson8-clkc"; + #clock-cells = <1>; + #reset-cells = <1>; + }; +}; + &hwrng { compatible = "amlogic,meson8b-rng", "amlogic,meson-rng"; clocks = <&clkc CLKID_RNG0>; @@ -450,6 +510,9 @@ clocks = <&clkc CLKID_XTAL>, <&clkc CLKID_SAR_ADC>; clock-names = "clkin", "core"; + amlogic,hhi-sysctrl = <&hhi>; + nvmem-cells = <&temperature_calib>; + nvmem-cell-names = "temperature_calib"; }; &sdio { diff --git a/dts/src/arm/meson8m2-mxiii-plus.dts b/dts/src/arm/meson8m2-mxiii-plus.dts index 6ac02beb5f..29d830ae4b 100644 --- a/dts/src/arm/meson8m2-mxiii-plus.dts +++ b/dts/src/arm/meson8m2-mxiii-plus.dts @@ -28,6 +28,7 @@ }; memory { + device_type = "memory"; reg = <0x40000000 0x80000000>; }; @@ -44,6 +45,11 @@ }; }; + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&saradc 8>; + }; + vcc_3v3: regulator-vcc3v3 { compatible = "regulator-fixed"; regulator-name = "VCC3V3"; diff --git a/dts/src/arm/meson8m2.dtsi b/dts/src/arm/meson8m2.dtsi index d1a28c2ada..bb87b251e1 100644 --- a/dts/src/arm/meson8m2.dtsi +++ b/dts/src/arm/meson8m2.dtsi @@ -50,6 +50,10 @@ }; }; +&saradc { + compatible = "amlogic,meson8m2-saradc", "amlogic,meson-saradc"; +}; + &wdt { compatible = "amlogic,meson8m2-wdt", "amlogic,meson8b-wdt"; }; diff --git a/dts/src/arm/milbeaut-m10v-evb.dts b/dts/src/arm/milbeaut-m10v-evb.dts new file mode 100644 index 0000000000..614f60c6b0 --- /dev/null +++ b/dts/src/arm/milbeaut-m10v-evb.dts @@ -0,0 +1,32 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Socionext Milbeaut M10V Evaluation Board */ +/dts-v1/; +#include "milbeaut-m10v.dtsi" + +/ { + model = "Socionext M10V EVB"; + compatible = "socionext,milbeaut-m10v-evb", "socionext,sc2000a"; + + aliases { + serial0 = &uart1; + }; + + chosen { + bootargs = "rootwait earlycon"; + stdout-path = "serial0:115200n8"; + }; + + clocks { + uclk40xi: uclk40xi { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <40000000>; + }; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0x40000000 0x80000000>; + }; + +}; diff --git a/dts/src/arm/milbeaut-m10v.dtsi b/dts/src/arm/milbeaut-m10v.dtsi new file mode 100644 index 0000000000..aa7c6caeb7 --- /dev/null +++ b/dts/src/arm/milbeaut-m10v.dtsi @@ -0,0 +1,95 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + compatible = "socionext,sc2000a"; + interrupt-parent = <&gic>; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + enable-method = "socionext,milbeaut-m10v-smp"; + cpu@f00 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0xf00>; + }; + cpu@f01 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0xf01>; + }; + cpu@f02 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0xf02>; + }; + cpu@f03 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0xf03>; + }; + }; + + timer { /* The Generic Timer */ + compatible = "arm,armv7-timer"; + interrupts = <GIC_PPI 13 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 14 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 11 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 10 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + clock-frequency = <40000000>; + always-on; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + interrupt-parent = <&gic>; + + gic: interrupt-controller@1d000000 { + compatible = "arm,cortex-a7-gic"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x1d001000 0x1000>, + <0x1d002000 0x1000>; /* CPU I/f base and size */ + }; + + timer@1e000050 { /* 32-bit Reload Timers */ + compatible = "socionext,milbeaut-timer"; + reg = <0x1e000050 0x20>; + interrupts = <0 91 4>; + }; + + uart1: serial@1e700010 { /* PE4, PE5 */ + /* Enable this as ttyUSI0 */ + compatible = "socionext,milbeaut-usio-uart"; + reg = <0x1e700010 0x10>; + interrupts = <0 141 0x4>, <0 149 0x4>; + interrupt-names = "rx", "tx"; + }; + + }; + + sram@0 { + compatible = "mmio-sram"; + reg = <0x0 0x10000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x0 0x10000>; + smp-sram@f100 { + compatible = "socionext,milbeaut-smp-sram"; + reg = <0xf100 0x20>; + }; + }; +}; diff --git a/dts/src/arm/mmp2-brownstone.dts b/dts/src/arm/mmp2-brownstone.dts index 350208c5e1..3da038ba57 100644 --- a/dts/src/arm/mmp2-brownstone.dts +++ b/dts/src/arm/mmp2-brownstone.dts @@ -19,6 +19,7 @@ }; memory { + device_type = "memory"; reg = <0x00000000 0x08000000>; }; diff --git a/dts/src/arm/mmp2.dtsi b/dts/src/arm/mmp2.dtsi index ee03e08467..f02fb97f51 100644 --- a/dts/src/arm/mmp2.dtsi +++ b/dts/src/arm/mmp2.dtsi @@ -7,10 +7,12 @@ * publishhed by the Free Software Foundation. */ -#include "skeleton.dtsi" #include <dt-bindings/clock/marvell,mmp2.h> / { + #address-cells = <1>; + #size-cells = <1>; + aliases { serial0 = &uart1; serial1 = &uart2; diff --git a/dts/src/arm/moxart.dtsi b/dts/src/arm/moxart.dtsi index da7b3237bf..cbf17656bc 100644 --- a/dts/src/arm/moxart.dtsi +++ b/dts/src/arm/moxart.dtsi @@ -5,10 +5,11 @@ * Licensed under GPLv2 or later. */ -/include/ "skeleton.dtsi" #include <dt-bindings/interrupt-controller/irq.h> / { + #address-cells = <1>; + #size-cells = <1>; compatible = "moxa,moxart"; model = "MOXART"; interrupt-parent = <&intc>; diff --git a/dts/src/arm/mps2.dtsi b/dts/src/arm/mps2.dtsi index 2346739055..96fb5a5cf4 100644 --- a/dts/src/arm/mps2.dtsi +++ b/dts/src/arm/mps2.dtsi @@ -171,7 +171,7 @@ uart0: serial@4000 { compatible = "arm,mps2-uart"; reg = <0x4000 0x1000>; - interrupts = <0 1 12>; + interrupts = <0>, <1>, <12>; clocks = <&sysclk>; status = "disabled"; }; @@ -179,7 +179,7 @@ uart1: serial@5000 { compatible = "arm,mps2-uart"; reg = <0x5000 0x1000>; - interrupts = <2 3 12>; + interrupts = <2>, <3>, <12>; clocks = <&sysclk>; status = "disabled"; }; @@ -187,7 +187,7 @@ uart2: serial@6000 { compatible = "arm,mps2-uart"; reg = <0x6000 0x1000>; - interrupts = <4 5 12>; + interrupts = <4>, <5>, <12>; clocks = <&sysclk>; status = "disabled"; }; diff --git a/dts/src/arm/mt2701-evb.dts b/dts/src/arm/mt2701-evb.dts index be0edb3dae..88f8fd2230 100644 --- a/dts/src/arm/mt2701-evb.dts +++ b/dts/src/arm/mt2701-evb.dts @@ -13,6 +13,7 @@ compatible = "mediatek,mt2701-evb", "mediatek,mt2701"; memory { + device_type = "memory"; reg = <0 0x80000000 0 0x40000000>; }; diff --git a/dts/src/arm/mt2701.dtsi b/dts/src/arm/mt2701.dtsi index 180377e56e..51e1305c64 100644 --- a/dts/src/arm/mt2701.dtsi +++ b/dts/src/arm/mt2701.dtsi @@ -12,10 +12,11 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/memory/mt2701-larb-port.h> #include <dt-bindings/reset/mt2701-resets.h> -#include "skeleton64.dtsi" #include "mt2701-pinfunc.h" / { + #address-cells = <2>; + #size-cells = <2>; compatible = "mediatek,mt2701"; interrupt-parent = <&cirq>; diff --git a/dts/src/arm/mt6580-evbp1.dts b/dts/src/arm/mt6580-evbp1.dts index ca137897ed..755a0774a8 100644 --- a/dts/src/arm/mt6580-evbp1.dts +++ b/dts/src/arm/mt6580-evbp1.dts @@ -22,6 +22,7 @@ }; memory { + device_type = "memory"; reg = <0x80000000 0x20000000>; }; }; diff --git a/dts/src/arm/mt6580.dtsi b/dts/src/arm/mt6580.dtsi index 2bdc5ed12f..9e17698c06 100644 --- a/dts/src/arm/mt6580.dtsi +++ b/dts/src/arm/mt6580.dtsi @@ -7,7 +7,6 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> -#include "skeleton.dtsi" / { compatible = "mediatek,mt6580"; diff --git a/dts/src/arm/mt6589-aquaris5.dts b/dts/src/arm/mt6589-aquaris5.dts index 7bbaa1279a..1e7079a3b4 100644 --- a/dts/src/arm/mt6589-aquaris5.dts +++ b/dts/src/arm/mt6589-aquaris5.dts @@ -18,6 +18,7 @@ }; memory { + device_type = "memory"; reg = <0x80000000 0x40000000>; }; diff --git a/dts/src/arm/mt6589.dtsi b/dts/src/arm/mt6589.dtsi index 28df849568..f3ccb70c07 100644 --- a/dts/src/arm/mt6589.dtsi +++ b/dts/src/arm/mt6589.dtsi @@ -7,9 +7,10 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> -#include "skeleton.dtsi" / { + #address-cells = <1>; + #size-cells = <1>; compatible = "mediatek,mt6589"; interrupt-parent = <&sysirq>; diff --git a/dts/src/arm/mt6592-evb.dts b/dts/src/arm/mt6592-evb.dts index 02849f6548..5e00c1cca2 100644 --- a/dts/src/arm/mt6592-evb.dts +++ b/dts/src/arm/mt6592-evb.dts @@ -13,7 +13,7 @@ compatible = "mediatek,mt6592-evb", "mediatek,mt6592"; memory { + device_type = "memory"; reg = <0x80000000 0x40000000>; }; }; - diff --git a/dts/src/arm/mt6592.dtsi b/dts/src/arm/mt6592.dtsi index 8696ac891d..3716f8db95 100644 --- a/dts/src/arm/mt6592.dtsi +++ b/dts/src/arm/mt6592.dtsi @@ -7,9 +7,10 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> -#include "skeleton.dtsi" / { + #address-cells = <1>; + #size-cells = <1>; compatible = "mediatek,mt6592"; interrupt-parent = <&sysirq>; diff --git a/dts/src/arm/mt7623.dtsi b/dts/src/arm/mt7623.dtsi index 98f1159663..a79f0b6c34 100644 --- a/dts/src/arm/mt7623.dtsi +++ b/dts/src/arm/mt7623.dtsi @@ -187,17 +187,26 @@ cooling-maps { map0 { trip = <&cpu_passive>; - cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; map1 { trip = <&cpu_active>; - cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; map2 { trip = <&cpu_hot>; - cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; }; diff --git a/dts/src/arm/mt8127-moose.dts b/dts/src/arm/mt8127-moose.dts index 308829b2da..560687af87 100644 --- a/dts/src/arm/mt8127-moose.dts +++ b/dts/src/arm/mt8127-moose.dts @@ -13,6 +13,7 @@ compatible = "mediatek,mt8127-moose", "mediatek,mt8127"; memory { + device_type = "memory"; reg = <0 0x80000000 0 0x40000000>; }; }; diff --git a/dts/src/arm/mt8127.dtsi b/dts/src/arm/mt8127.dtsi index 3adfc6f785..aced173c2a 100644 --- a/dts/src/arm/mt8127.dtsi +++ b/dts/src/arm/mt8127.dtsi @@ -7,9 +7,10 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> -#include "skeleton64.dtsi" / { + #address-cells = <2>; + #size-cells = <2>; compatible = "mediatek,mt8127"; interrupt-parent = <&sysirq>; diff --git a/dts/src/arm/mt8135-evbp1.dts b/dts/src/arm/mt8135-evbp1.dts index 0ace7a40a6..f6147fe62f 100644 --- a/dts/src/arm/mt8135-evbp1.dts +++ b/dts/src/arm/mt8135-evbp1.dts @@ -13,6 +13,7 @@ compatible = "mediatek,mt8135-evbp1", "mediatek,mt8135"; memory { + device_type = "memory"; reg = <0 0x80000000 0 0x40000000>; }; }; diff --git a/dts/src/arm/mt8135.dtsi b/dts/src/arm/mt8135.dtsi index 688069dc15..0e4e835026 100644 --- a/dts/src/arm/mt8135.dtsi +++ b/dts/src/arm/mt8135.dtsi @@ -9,10 +9,11 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/reset/mt8135-resets.h> -#include "skeleton64.dtsi" #include "mt8135-pinfunc.h" / { + #address-cells = <2>; + #size-cells = <2>; compatible = "mediatek,mt8135"; interrupt-parent = <&sysirq>; diff --git a/dts/src/arm/nspire.dtsi b/dts/src/arm/nspire.dtsi index 1a5ae4cd10..5a3c1f9d18 100644 --- a/dts/src/arm/nspire.dtsi +++ b/dts/src/arm/nspire.dtsi @@ -9,9 +9,9 @@ * */ -/include/ "skeleton.dtsi" - / { + #address-cells = <1>; + #size-cells = <1>; interrupt-parent = <&intc>; cpus { diff --git a/dts/src/arm/omap3-evm-common.dtsi b/dts/src/arm/omap3-evm-common.dtsi index 4c1227d1e7..17c89df6ce 100644 --- a/dts/src/arm/omap3-evm-common.dtsi +++ b/dts/src/arm/omap3-evm-common.dtsi @@ -122,6 +122,7 @@ }; &mmc2 { + interrupts-extended = <&intc 86 &omap3_pmx_core 0x12e>; vmmc-supply = <&wl12xx_vmmc>; non-removable; bus-width = <4>; @@ -132,8 +133,10 @@ wlcore: wlcore@2 { compatible = "ti,wl1271"; reg = <2>; - interrupt-parent = <&gpio5>; - interrupts = <21 IRQ_TYPE_EDGE_RISING>; /* gpio 149 */ + /* gpio_149 with uart1_rts pad as wakeirq */ + interrupts-extended = <&gpio5 21 IRQ_TYPE_EDGE_RISING>, + <&omap3_pmx_core 0x14e>; + interrupt-names = "irq", "wakeup"; ref-clock-frequency = <38400000>; }; }; diff --git a/dts/src/arm/omap3-evm-processor-common.dtsi b/dts/src/arm/omap3-evm-processor-common.dtsi index ce7f42f944..b4109f48ec 100644 --- a/dts/src/arm/omap3-evm-processor-common.dtsi +++ b/dts/src/arm/omap3-evm-processor-common.dtsi @@ -86,6 +86,10 @@ OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */ OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */ OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */ + OMAP3_CORE1_IOPAD(0x2164, PIN_OUTPUT | MUX_MODE1) /* sdmmc2_dat4.sdmmc2_dir_dat0 */ + OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE1) /* sdmmc2_dat5.sdmmc2_dir_dat1 */ + OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE1) /* sdmmc2_dat6.sdmmc2_dir_cmd */ + OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT | MUX_MODE1) /* sdmmc2_dat7.sdmmc2_clkin */ >; }; @@ -127,9 +131,13 @@ >; }; + /* + * Note that gpio_150 pulled high with internal pull to prevent wlcore + * reset on return from off mode in idle. + */ wl12xx_gpio: pinmux_wl12xx_gpio { pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x2180, PIN_OUTPUT | MUX_MODE4) /* uart1_cts.gpio_150 */ + OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT_PULLUP | MUX_MODE7) /* uart1_cts.gpio_150 */ OMAP3_CORE1_IOPAD(0x217e, PIN_INPUT | MUX_MODE4) /* uart1_rts.gpio_149 */ >; }; diff --git a/dts/src/arm/omap3-gta04.dtsi b/dts/src/arm/omap3-gta04.dtsi index 93b420934e..04f2b53d4d 100644 --- a/dts/src/arm/omap3-gta04.dtsi +++ b/dts/src/arm/omap3-gta04.dtsi @@ -32,6 +32,14 @@ display1 = &tv0; }; + ldo_3v3: fixedregulator { + compatible = "regulator-fixed"; + regulator-name = "ldo_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + /* fixed 26MHz oscillator */ hfclk_26m: oscillator { #clock-cells = <0>; @@ -116,6 +124,7 @@ spi-cpol; spi-cpha; + backlight= <&backlight>; label = "lcd"; port { lcd_in: endpoint { @@ -125,7 +134,7 @@ }; }; - backlight { + backlight: backlight { compatible = "pwm-backlight"; pwms = <&pwm11 0 12000000 0>; pwm-names = "backlight"; @@ -224,6 +233,15 @@ }; }; +&omap3_pmx_wkup { + gpio1_pins: pinmux_gpio1_pins { + pinctrl-single,pins = < + OMAP3_WKUP_IOPAD(0x2a14, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE4) /* sys_boot5.gpio_7 */ + OMAP3_WKUP_IOPAD(0x2a1a, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE4) /* sys_clkout.gpio_10 */ + >; + }; +}; + &omap3_pmx_core { pinctrl-names = "default"; pinctrl-0 = < @@ -312,6 +330,12 @@ >; }; + gps_pins: pinmux_gps_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* gpio145 */ + >; + }; + hdq_pins: hdq_pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x21c6, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda.hdq */ @@ -636,6 +660,11 @@ status = "disabled"; }; +&gpio1 { + pinctrl-names = "default"; + pinctrl-0 = <&gpio1_pins>; +}; + &uart1 { pinctrl-names = "default"; pinctrl-0 = <&uart1_pins>; @@ -644,6 +673,14 @@ &uart2 { pinctrl-names = "default"; pinctrl-0 = <&uart2_pins>; + gnss: gnss { + compatible = "wi2wi,w2sg0004"; + pinctrl-names = "default"; + pinctrl-0 = <&gps_pins>; + sirf,onoff-gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>; + lna-supply = <&vsim>; + vcc-supply = <&ldo_3v3>; + }; }; &uart3 { diff --git a/dts/src/arm/omap3-gta04a5.dts b/dts/src/arm/omap3-gta04a5.dts index bd232b1b24..223b47ac59 100644 --- a/dts/src/arm/omap3-gta04a5.dts +++ b/dts/src/arm/omap3-gta04a5.dts @@ -82,7 +82,7 @@ /* * for WL183x module see - * http://lxr.free-electrons.com/source/Documentation/devicetree/bindings/net/wireless/ti,wlcore.txt + * Documentation/devicetree/bindings/net/wireless/ti,wlcore.txt */ &wifi_pwrseq { diff --git a/dts/src/arm/omap4-droid4-xt894.dts b/dts/src/arm/omap4-droid4-xt894.dts index 67d77eee94..e21ec929f0 100644 --- a/dts/src/arm/omap4-droid4-xt894.dts +++ b/dts/src/arm/omap4-droid4-xt894.dts @@ -359,20 +359,24 @@ &mmc3 { vmmc-supply = <&wl12xx_vmmc>; + /* uart2_tx.sdmmc3_dat1 pad as wakeirq */ interrupts-extended = <&wakeupgen GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH &omap4_pmx_core 0xde>; - + interrupt-names = "irq", "wakeup"; non-removable; bus-width = <4>; cap-power-off-card; + keep-power-in-suspend; #address-cells = <1>; #size-cells = <0>; wlcore: wlcore@2 { compatible = "ti,wl1285", "ti,wl1283"; reg = <2>; - interrupt-parent = <&gpio4>; - interrupts = <4 IRQ_TYPE_EDGE_RISING>; /* gpio100 */ + /* gpio_100 with gpmc_wait2 pad as wakeirq */ + interrupts-extended = <&gpio4 4 IRQ_TYPE_EDGE_RISING>, + <&omap4_pmx_core 0x4e>; + interrupt-names = "irq", "wakeup"; ref-clock-frequency = <26000000>; tcxo-clock-frequency = <26000000>; }; diff --git a/dts/src/arm/omap4-panda-common.dtsi b/dts/src/arm/omap4-panda-common.dtsi index 27895c1604..926f018823 100644 --- a/dts/src/arm/omap4-panda-common.dtsi +++ b/dts/src/arm/omap4-panda-common.dtsi @@ -485,8 +485,10 @@ wlcore: wlcore@2 { compatible = "ti,wl1271"; reg = <2>; - interrupt-parent = <&gpio2>; - interrupts = <21 IRQ_TYPE_EDGE_RISING>; /* gpio 53 */ + /* gpio_53 with gpmc_ncs3 pad as wakeup */ + interrupts-extended = <&gpio2 21 IRQ_TYPE_EDGE_RISING>, + <&omap4_pmx_core 0x3a>; + interrupt-names = "irq", "wakeup"; ref-clock-frequency = <38400000>; }; }; diff --git a/dts/src/arm/omap4-sdp.dts b/dts/src/arm/omap4-sdp.dts index 9dc7ec7655..c88817bdcc 100644 --- a/dts/src/arm/omap4-sdp.dts +++ b/dts/src/arm/omap4-sdp.dts @@ -26,6 +26,9 @@ }; vdd_eth: fixedregulator-vdd-eth { + pinctrl-names = "default"; + pinctrl-0 = <&enet_enable_gpio>; + compatible = "regulator-fixed"; regulator-name = "VDD_ETH"; regulator-min-microvolt = <3300000>; @@ -352,6 +355,29 @@ OMAP4_IOPAD(0x152, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat3.sdmmc5_dat3 */ >; }; + + /* gpio_48 for ENET_ENABLE */ + enet_enable_gpio: pinmux_enet_enable_gpio { + pinctrl-single,pins = < + OMAP4_IOPAD(0x070, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* gpmc_a24.gpio_48 */ + >; + }; + + ks8851_pins: pinmux_ks8851_pins { + pinctrl-single,pins = < + /* ENET_INT */ + OMAP4_IOPAD(0x054, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ad10.gpio_34 */ + /* + * Misterious pin which makes the ethernet working + * The legacy board file requested this pin on boot + * (ETH_KS8851_QUART) and set it to high, similarly to + * the ENET_ENABLE pin. + * We could use gpio-hog to keep it high, but let's use + * it as a reset GPIO for ks8851. + */ + OMAP4_IOPAD(0x13a, PIN_OUTPUT_PULLUP | MUX_MODE3) /* mcspi1_cs1.gpio_138 */ + >; + }; }; &i2c1 { @@ -452,12 +478,16 @@ pinctrl-0 = <&mcspi1_pins>; eth@0 { + pinctrl-names = "default"; + pinctrl-0 = <&ks8851_pins>; + compatible = "ks8851"; spi-max-frequency = <24000000>; reg = <0>; interrupt-parent = <&gpio2>; interrupts = <2 IRQ_TYPE_LEVEL_LOW>; /* gpio line 34 */ vdd-supply = <&vdd_eth>; + reset-gpios = <&gpio5 10 GPIO_ACTIVE_HIGH>; }; }; diff --git a/dts/src/arm/orion5x-lacie-d2-network.dts b/dts/src/arm/orion5x-lacie-d2-network.dts index 8c2449da6f..422958d13d 100644 --- a/dts/src/arm/orion5x-lacie-d2-network.dts +++ b/dts/src/arm/orion5x-lacie-d2-network.dts @@ -19,6 +19,7 @@ compatible = "lacie,d2-network", "marvell,orion5x-88f5182", "marvell,orion5x"; memory { + device_type = "memory"; reg = <0x00000000 0x4000000>; /* 64 MB */ }; diff --git a/dts/src/arm/orion5x-lacie-ethernet-disk-mini-v2.dts b/dts/src/arm/orion5x-lacie-ethernet-disk-mini-v2.dts index b545d0f228..0043e00401 100644 --- a/dts/src/arm/orion5x-lacie-ethernet-disk-mini-v2.dts +++ b/dts/src/arm/orion5x-lacie-ethernet-disk-mini-v2.dts @@ -25,6 +25,7 @@ compatible = "lacie,ethernet-disk-mini-v2", "marvell,orion5x-88f5182", "marvell,orion5x"; memory { + device_type = "memory"; reg = <0x00000000 0x4000000>; /* 64 MB */ }; diff --git a/dts/src/arm/orion5x-lswsgl.dts b/dts/src/arm/orion5x-lswsgl.dts index 0d97ded662..2fbc17d6df 100644 --- a/dts/src/arm/orion5x-lswsgl.dts +++ b/dts/src/arm/orion5x-lswsgl.dts @@ -55,6 +55,7 @@ compatible = "buffalo,lswsgl", "marvell,orion5x-88f5182", "marvell,orion5x"; memory { + device_type = "memory"; reg = <0x00000000 0x8000000>; /* 128 MB */ }; diff --git a/dts/src/arm/orion5x-maxtor-shared-storage-2.dts b/dts/src/arm/orion5x-maxtor-shared-storage-2.dts index 0324cb5493..0ca6208a26 100644 --- a/dts/src/arm/orion5x-maxtor-shared-storage-2.dts +++ b/dts/src/arm/orion5x-maxtor-shared-storage-2.dts @@ -19,6 +19,7 @@ compatible = "maxtor,shared-storage-2", "marvell,orion5x-88f5182", "marvell,orion5x"; memory { + device_type = "memory"; reg = <0x00000000 0x4000000>; /* 64 MB */ }; diff --git a/dts/src/arm/orion5x-netgear-wnr854t.dts b/dts/src/arm/orion5x-netgear-wnr854t.dts index 9f6ae4e1de..ea081afa46 100644 --- a/dts/src/arm/orion5x-netgear-wnr854t.dts +++ b/dts/src/arm/orion5x-netgear-wnr854t.dts @@ -21,6 +21,7 @@ }; memory { + device_type = "memory"; reg = <0x00000000 0x2000000>; /* 32 MB */ }; diff --git a/dts/src/arm/orion5x-rd88f5182-nas.dts b/dts/src/arm/orion5x-rd88f5182-nas.dts index d1817af53e..487324f7c5 100644 --- a/dts/src/arm/orion5x-rd88f5182-nas.dts +++ b/dts/src/arm/orion5x-rd88f5182-nas.dts @@ -16,6 +16,7 @@ compatible = "marvell,rd-88f5182-nas", "marvell,orion5x-88f5182", "marvell,orion5x"; memory { + device_type = "memory"; reg = <0x00000000 0x4000000>; /* 64 MB */ }; diff --git a/dts/src/arm/orion5x.dtsi b/dts/src/arm/orion5x.dtsi index fbccfbbab2..61e631b3fd 100644 --- a/dts/src/arm/orion5x.dtsi +++ b/dts/src/arm/orion5x.dtsi @@ -6,11 +6,11 @@ * warranty of any kind, whether express or implied. */ -#include "skeleton.dtsi" - #define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16)) / { + #address-cells = <1>; + #size-cells = <1>; model = "Marvell Orion5x SoC"; compatible = "marvell,orion5x"; interrupt-parent = <&intc>; diff --git a/dts/src/arm/ox810se.dtsi b/dts/src/arm/ox810se.dtsi index c2b48a1838..3a26650de4 100644 --- a/dts/src/arm/ox810se.dtsi +++ b/dts/src/arm/ox810se.dtsi @@ -6,11 +6,12 @@ * Licensed under GPLv2 or later */ -/include/ "skeleton.dtsi" #include <dt-bindings/clock/oxsemi,ox810se.h> #include <dt-bindings/reset/oxsemi,ox810se.h> / { + #address-cells = <1>; + #size-cells = <1>; compatible = "oxsemi,ox810se"; cpus { @@ -25,6 +26,7 @@ }; memory { + device_type = "memory"; /* Max 256MB @ 0x48000000 */ reg = <0x48000000 0x10000000>; }; diff --git a/dts/src/arm/ox820.dtsi b/dts/src/arm/ox820.dtsi index 085bbd33ea..f3239586f3 100644 --- a/dts/src/arm/ox820.dtsi +++ b/dts/src/arm/ox820.dtsi @@ -6,12 +6,13 @@ * Licensed under GPLv2 or later */ -/include/ "skeleton.dtsi" #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/oxsemi,ox820.h> #include <dt-bindings/reset/oxsemi,ox820.h> / { + #address-cells = <1>; + #size-cells = <1>; compatible = "oxsemi,ox820"; cpus { @@ -35,6 +36,7 @@ }; memory { + device_type = "memory"; /* Max 512MB @ 0x60000000 */ reg = <0x60000000 0x20000000>; }; diff --git a/dts/src/arm/picoxcell-pc3x2.dtsi b/dts/src/arm/picoxcell-pc3x2.dtsi index a1266cf877..291a28f347 100644 --- a/dts/src/arm/picoxcell-pc3x2.dtsi +++ b/dts/src/arm/picoxcell-pc3x2.dtsi @@ -10,7 +10,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ -/include/ "skeleton.dtsi" / { model = "Picochip picoXcell PC3X2"; compatible = "picochip,pc3x2"; diff --git a/dts/src/arm/picoxcell-pc3x3.dtsi b/dts/src/arm/picoxcell-pc3x3.dtsi index d78cd207ec..bf9a39ea76 100644 --- a/dts/src/arm/picoxcell-pc3x3.dtsi +++ b/dts/src/arm/picoxcell-pc3x3.dtsi @@ -10,7 +10,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ -/include/ "skeleton.dtsi" / { model = "Picochip picoXcell PC3X3"; compatible = "picochip,pc3x3"; diff --git a/dts/src/arm/prima2-evb.dts b/dts/src/arm/prima2-evb.dts index 57286b4e7b..55594b3bbc 100644 --- a/dts/src/arm/prima2-evb.dts +++ b/dts/src/arm/prima2-evb.dts @@ -15,6 +15,7 @@ compatible = "sirf,prima2", "sirf,prima2-cb"; memory { + device_type = "memory"; reg = <0x00000000 0x20000000>; }; diff --git a/dts/src/arm/prima2.dtsi b/dts/src/arm/prima2.dtsi index 1ca1a9aa95..54d4f8850e 100644 --- a/dts/src/arm/prima2.dtsi +++ b/dts/src/arm/prima2.dtsi @@ -6,7 +6,6 @@ * Licensed under GPLv2 or later. */ -/include/ "skeleton.dtsi" / { compatible = "sirf,prima2"; #address-cells = <1>; diff --git a/dts/src/arm/pxa168.dtsi b/dts/src/arm/pxa168.dtsi index b899e25cbb..7137f35501 100644 --- a/dts/src/arm/pxa168.dtsi +++ b/dts/src/arm/pxa168.dtsi @@ -7,10 +7,12 @@ * publishhed by the Free Software Foundation. */ -#include "skeleton.dtsi" #include <dt-bindings/clock/marvell,pxa168.h> / { + #address-cells = <1>; + #size-cells = <1>; + aliases { serial0 = &uart1; serial1 = &uart2; diff --git a/dts/src/arm/pxa2xx.dtsi b/dts/src/arm/pxa2xx.dtsi index e83879d97a..bd6bf6d930 100644 --- a/dts/src/arm/pxa2xx.dtsi +++ b/dts/src/arm/pxa2xx.dtsi @@ -6,7 +6,6 @@ * Licensed under GPLv2 or later. */ -#include "skeleton.dtsi" #include "dt-bindings/clock/pxa-clock.h" #define PMGROUP(pin) #pin @@ -29,6 +28,8 @@ } / { + #address-cells = <1>; + #size-cells = <1>; model = "Marvell PXA2xx family SoC"; compatible = "marvell,pxa2xx"; interrupt-parent = <&pxairq>; diff --git a/dts/src/arm/pxa910.dtsi b/dts/src/arm/pxa910.dtsi index 0868f6729b..c88553a8ee 100644 --- a/dts/src/arm/pxa910.dtsi +++ b/dts/src/arm/pxa910.dtsi @@ -7,10 +7,12 @@ * publishhed by the Free Software Foundation. */ -#include "skeleton.dtsi" #include <dt-bindings/clock/marvell,pxa910.h> / { + #address-cells = <1>; + #size-cells = <1>; + aliases { serial0 = &uart1; serial1 = &uart2; diff --git a/dts/src/arm/qcom-apq8060-dragonboard.dts b/dts/src/arm/qcom-apq8060-dragonboard.dts index 497bb065eb..4e6c50d45c 100644 --- a/dts/src/arm/qcom-apq8060-dragonboard.dts +++ b/dts/src/arm/qcom-apq8060-dragonboard.dts @@ -93,9 +93,8 @@ vdd-supply = <&pm8058_l14>; // 2.85V aset-gpios = <&pm8058_gpio 35 GPIO_ACTIVE_LOW>; capella,aset-resistance-ohms = <100000>; - /* GPIO34 has interrupt 225 on the PM8058 */ /* Trig on both edges - getting close or far away */ - interrupts-extended = <&pm8058 225 IRQ_TYPE_EDGE_BOTH>; + interrupts-extended = <&pm8058_gpio 34 IRQ_TYPE_EDGE_BOTH>; /* MPP05 analog input to the XOADC */ io-channels = <&xoadc 0x00 0x05>; io-channel-names = "aout"; @@ -515,9 +514,8 @@ ak8975@c { compatible = "asahi-kasei,ak8975"; reg = <0x0c>; - /* FIXME: GPIO33 has interrupt 224 on the PM8058 */ - interrupt-parent = <&pm8058>; - interrupts = <224 IRQ_TYPE_EDGE_RISING>; + interrupt-parent = <&pm8058_gpio>; + interrupts = <33 IRQ_TYPE_EDGE_RISING>; pinctrl-names = "default"; pinctrl-0 = <&dragon_ak8975_gpios>; vid-supply = <&pm8058_lvs0>; // 1.8V @@ -526,9 +524,8 @@ bmp085@77 { compatible = "bosch,bmp085"; reg = <0x77>; - /* FIXME: GPIO16 has interrupt 207 on the PM8058 */ - interrupt-parent = <&pm8058>; - interrupts = <207 IRQ_TYPE_EDGE_RISING>; + interrupt-parent = <&pm8058_gpio>; + interrupts = <16 IRQ_TYPE_EDGE_RISING>; reset-gpios = <&tlmm 86 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&dragon_bmp085_gpios>; @@ -539,12 +536,11 @@ compatible = "invensense,mpu3050"; reg = <0x68>; /* - * GPIO17 has interrupt 208 on the - * PM8058, it is pulled high by a 10k + * GPIO17 is pulled high by a 10k * resistor to VLOGIC so needs to be * active low/falling edge. */ - interrupts-extended = <&pm8058 208 IRQ_TYPE_EDGE_FALLING>; + interrupts-extended = <&pm8058_gpio 17 IRQ_TYPE_EDGE_FALLING>; pinctrl-names = "default"; pinctrl-0 = <&dragon_mpu3050_gpios>; vlogic-supply = <&pm8058_lvs0>; // 1.8V @@ -589,11 +585,10 @@ compatible = "smsc,lan9221", "smsc,lan9115"; reg = <2 0x0 0x100>; /* - * GPIO7 has interrupt 198 on the PM8058 * The second interrupt is the PME interrupt * for network wakeup, connected to the TLMM. */ - interrupts-extended = <&pm8058 198 IRQ_TYPE_EDGE_FALLING>, + interrupts-extended = <&pm8058_gpio 7 IRQ_TYPE_EDGE_FALLING>, <&tlmm 29 IRQ_TYPE_EDGE_RISING>; reset-gpios = <&tlmm 30 GPIO_ACTIVE_LOW>; vdd33a-supply = <&dragon_veth>; diff --git a/dts/src/arm/qcom-apq8064.dtsi b/dts/src/arm/qcom-apq8064.dtsi index 48c3cf4276..bd6907db61 100644 --- a/dts/src/arm/qcom-apq8064.dtsi +++ b/dts/src/arm/qcom-apq8064.dtsi @@ -1,7 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /dts-v1/; -#include "skeleton.dtsi" #include <dt-bindings/clock/qcom,gcc-msm8960.h> #include <dt-bindings/reset/qcom,gcc-msm8960.h> #include <dt-bindings/clock/qcom,mmcc-msm8960.h> @@ -10,6 +9,8 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> / { + #address-cells = <1>; + #size-cells = <1>; model = "Qualcomm APQ8064"; compatible = "qcom,apq8064"; interrupt-parent = <&intc>; @@ -94,6 +95,11 @@ }; }; + memory { + device_type = "memory"; + reg = <0x0 0x0>; + }; + thermal-zones { cpu-thermal0 { polling-delay-passive = <250>; @@ -705,50 +711,8 @@ compatible = "qcom,pm8921-gpio", "qcom,ssbi-gpio"; reg = <0x150>; - interrupts = <192 IRQ_TYPE_NONE>, - <193 IRQ_TYPE_NONE>, - <194 IRQ_TYPE_NONE>, - <195 IRQ_TYPE_NONE>, - <196 IRQ_TYPE_NONE>, - <197 IRQ_TYPE_NONE>, - <198 IRQ_TYPE_NONE>, - <199 IRQ_TYPE_NONE>, - <200 IRQ_TYPE_NONE>, - <201 IRQ_TYPE_NONE>, - <202 IRQ_TYPE_NONE>, - <203 IRQ_TYPE_NONE>, - <204 IRQ_TYPE_NONE>, - <205 IRQ_TYPE_NONE>, - <206 IRQ_TYPE_NONE>, - <207 IRQ_TYPE_NONE>, - <208 IRQ_TYPE_NONE>, - <209 IRQ_TYPE_NONE>, - <210 IRQ_TYPE_NONE>, - <211 IRQ_TYPE_NONE>, - <212 IRQ_TYPE_NONE>, - <213 IRQ_TYPE_NONE>, - <214 IRQ_TYPE_NONE>, - <215 IRQ_TYPE_NONE>, - <216 IRQ_TYPE_NONE>, - <217 IRQ_TYPE_NONE>, - <218 IRQ_TYPE_NONE>, - <219 IRQ_TYPE_NONE>, - <220 IRQ_TYPE_NONE>, - <221 IRQ_TYPE_NONE>, - <222 IRQ_TYPE_NONE>, - <223 IRQ_TYPE_NONE>, - <224 IRQ_TYPE_NONE>, - <225 IRQ_TYPE_NONE>, - <226 IRQ_TYPE_NONE>, - <227 IRQ_TYPE_NONE>, - <228 IRQ_TYPE_NONE>, - <229 IRQ_TYPE_NONE>, - <230 IRQ_TYPE_NONE>, - <231 IRQ_TYPE_NONE>, - <232 IRQ_TYPE_NONE>, - <233 IRQ_TYPE_NONE>, - <234 IRQ_TYPE_NONE>, - <235 IRQ_TYPE_NONE>; + interrupt-controller; + #interrupt-cells = <2>; gpio-controller; #gpio-cells = <2>; diff --git a/dts/src/arm/qcom-apq8084.dtsi b/dts/src/arm/qcom-apq8084.dtsi index 899f28533e..0a0fb147eb 100644 --- a/dts/src/arm/qcom-apq8084.dtsi +++ b/dts/src/arm/qcom-apq8084.dtsi @@ -1,12 +1,12 @@ // SPDX-License-Identifier: GPL-2.0 /dts-v1/; -#include "skeleton.dtsi" - #include <dt-bindings/clock/qcom,gcc-apq8084.h> #include <dt-bindings/gpio/gpio.h> / { + #address-cells = <1>; + #size-cells = <1>; model = "Qualcomm APQ 8084"; compatible = "qcom,apq8084"; interrupt-parent = <&intc>; @@ -87,6 +87,11 @@ }; }; + memory { + device_type = "memory"; + reg = <0x0 0x0>; + }; + firmware { scm { compatible = "qcom,scm"; diff --git a/dts/src/arm/qcom-ipq4019.dtsi b/dts/src/arm/qcom-ipq4019.dtsi index 2d56008d8d..9e75f97770 100644 --- a/dts/src/arm/qcom-ipq4019.dtsi +++ b/dts/src/arm/qcom-ipq4019.dtsi @@ -13,12 +13,14 @@ /dts-v1/; -#include "skeleton.dtsi" #include <dt-bindings/clock/qcom,gcc-ipq4019.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/irq.h> / { + #address-cells = <1>; + #size-cells = <1>; + model = "Qualcomm Technologies, Inc. IPQ4019"; compatible = "qcom,ipq4019"; interrupt-parent = <&intc>; @@ -133,6 +135,11 @@ }; }; + memory { + device_type = "memory"; + reg = <0x0 0x0>; + }; + pmu { compatible = "arm,cortex-a7-pmu"; interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | @@ -396,7 +403,7 @@ ranges = <0x81000000 0 0x40200000 0x40200000 0 0x00100000 0x82000000 0 0x40300000 0x40300000 0 0x400000>; - interrupts = <GIC_SPI 141 IRQ_TYPE_EDGE_RISING>; + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; diff --git a/dts/src/arm/qcom-ipq8064.dtsi b/dts/src/arm/qcom-ipq8064.dtsi index f793cd1ad6..16c0da9793 100644 --- a/dts/src/arm/qcom-ipq8064.dtsi +++ b/dts/src/arm/qcom-ipq8064.dtsi @@ -1,7 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /dts-v1/; -#include "skeleton.dtsi" #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,gcc-ipq806x.h> #include <dt-bindings/clock/qcom,lcc-ipq806x.h> @@ -11,6 +10,8 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> / { + #address-cells = <1>; + #size-cells = <1>; model = "Qualcomm IPQ8064"; compatible = "qcom,ipq8064"; interrupt-parent = <&intc>; @@ -45,6 +46,11 @@ }; }; + memory { + device_type = "memory"; + reg = <0x0 0x0>; + }; + cpu-pmu { compatible = "qcom,krait-pmu"; interrupts = <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | diff --git a/dts/src/arm/qcom-mdm9615-wp8548.dtsi b/dts/src/arm/qcom-mdm9615-wp8548.dtsi index 7869898e39..26b034bd19 100644 --- a/dts/src/arm/qcom-mdm9615-wp8548.dtsi +++ b/dts/src/arm/qcom-mdm9615-wp8548.dtsi @@ -50,6 +50,7 @@ compatible = "swir,wp8548", "qcom,mdm9615"; memory { + device_type = "memory"; reg = <0x48000000 0x7F00000>; }; }; diff --git a/dts/src/arm/qcom-mdm9615.dtsi b/dts/src/arm/qcom-mdm9615.dtsi index c852b69229..02afc6a420 100644 --- a/dts/src/arm/qcom-mdm9615.dtsi +++ b/dts/src/arm/qcom-mdm9615.dtsi @@ -45,8 +45,6 @@ /dts-v1/; -/include/ "skeleton.dtsi" - #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,gcc-mdm9615.h> #include <dt-bindings/reset/qcom,gcc-mdm9615.h> @@ -54,6 +52,8 @@ #include <dt-bindings/soc/qcom,gsbi.h> / { + #address-cells = <1>; + #size-cells = <1>; model = "Qualcomm MDM9615"; compatible = "qcom,mdm9615"; interrupt-parent = <&intc>; @@ -323,13 +323,8 @@ pmicgpio: gpio@150 { compatible = "qcom,pm8018-gpio", "qcom,ssbi-gpio"; - interrupt-parent = <&pmicintc>; - interrupts = <24 IRQ_TYPE_NONE>, - <25 IRQ_TYPE_NONE>, - <26 IRQ_TYPE_NONE>, - <27 IRQ_TYPE_NONE>, - <28 IRQ_TYPE_NONE>, - <29 IRQ_TYPE_NONE>; + interrupt-controller; + #interrupt-cells = <2>; gpio-controller; #gpio-cells = <2>; }; diff --git a/dts/src/arm/qcom-msm8660.dtsi b/dts/src/arm/qcom-msm8660.dtsi index 70698941f6..65a994f0e0 100644 --- a/dts/src/arm/qcom-msm8660.dtsi +++ b/dts/src/arm/qcom-msm8660.dtsi @@ -1,14 +1,14 @@ // SPDX-License-Identifier: GPL-2.0 /dts-v1/; -/include/ "skeleton.dtsi" - #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,gcc-msm8660.h> #include <dt-bindings/soc/qcom,gsbi.h> / { + #address-cells = <1>; + #size-cells = <1>; model = "Qualcomm MSM8660"; compatible = "qcom,msm8660"; interrupt-parent = <&intc>; @@ -39,6 +39,11 @@ }; }; + memory { + device_type = "memory"; + reg = <0x0 0x0>; + }; + cpu-pmu { compatible = "qcom,scorpion-mp-pmu"; interrupts = <1 9 0x304>; @@ -133,6 +138,7 @@ #address-cells = <1>; #size-cells = <1>; ranges; + status = "disabled"; syscon-tcsr = <&tcsr>; @@ -140,7 +146,7 @@ compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; reg = <0x16540000 0x1000>, <0x16500000 0x1000>; - interrupts = <GIC_SPI 156 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GSBI6_UART_CLK>, <&gcc GSBI6_H_CLK>; clock-names = "core", "iface"; status = "disabled"; @@ -149,7 +155,7 @@ gsbi6_i2c: i2c@16580000 { compatible = "qcom,i2c-qup-v1.1.1"; reg = <0x16580000 0x1000>; - interrupts = <GIC_SPI 157 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GSBI6_QUP_CLK>, <&gcc GSBI6_H_CLK>; clock-names = "core", "iface"; #address-cells = <1>; @@ -167,6 +173,7 @@ #address-cells = <1>; #size-cells = <1>; ranges; + status = "disabled"; syscon-tcsr = <&tcsr>; @@ -174,7 +181,7 @@ compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; reg = <0x16640000 0x1000>, <0x16600000 0x1000>; - interrupts = <GIC_SPI 158 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GSBI7_UART_CLK>, <&gcc GSBI7_H_CLK>; clock-names = "core", "iface"; status = "disabled"; @@ -183,7 +190,7 @@ gsbi7_i2c: i2c@16680000 { compatible = "qcom,i2c-qup-v1.1.1"; reg = <0x16680000 0x1000>; - interrupts = <GIC_SPI 159 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GSBI7_QUP_CLK>, <&gcc GSBI7_H_CLK>; clock-names = "core", "iface"; #address-cells = <1>; @@ -207,7 +214,7 @@ gsbi8_i2c: i2c@19880000 { compatible = "qcom,i2c-qup-v1.1.1"; reg = <0x19880000 0x1000>; - interrupts = <GIC_SPI 161 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GSBI8_QUP_CLK>, <&gcc GSBI8_H_CLK>; clock-names = "core", "iface"; #address-cells = <1>; @@ -232,7 +239,7 @@ compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; reg = <0x19c40000 0x1000>, <0x19c00000 0x1000>; - interrupts = <0 195 IRQ_TYPE_NONE>; + interrupts = <0 195 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GSBI12_UART_CLK>, <&gcc GSBI12_H_CLK>; clock-names = "core", "iface"; status = "disabled"; @@ -241,7 +248,7 @@ gsbi12_i2c: i2c@19c80000 { compatible = "qcom,i2c-qup-v1.1.1"; reg = <0x19c80000 0x1000>; - interrupts = <0 196 IRQ_TYPE_NONE>; + interrupts = <0 196 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GSBI12_QUP_CLK>, <&gcc GSBI12_H_CLK>; clock-names = "core", "iface"; #address-cells = <1>; @@ -285,51 +292,8 @@ compatible = "qcom,pm8058-gpio", "qcom,ssbi-gpio"; reg = <0x150>; - interrupt-parent = <&pm8058>; - interrupts = <192 IRQ_TYPE_NONE>, - <193 IRQ_TYPE_NONE>, - <194 IRQ_TYPE_NONE>, - <195 IRQ_TYPE_NONE>, - <196 IRQ_TYPE_NONE>, - <197 IRQ_TYPE_NONE>, - <198 IRQ_TYPE_NONE>, - <199 IRQ_TYPE_NONE>, - <200 IRQ_TYPE_NONE>, - <201 IRQ_TYPE_NONE>, - <202 IRQ_TYPE_NONE>, - <203 IRQ_TYPE_NONE>, - <204 IRQ_TYPE_NONE>, - <205 IRQ_TYPE_NONE>, - <206 IRQ_TYPE_NONE>, - <207 IRQ_TYPE_NONE>, - <208 IRQ_TYPE_NONE>, - <209 IRQ_TYPE_NONE>, - <210 IRQ_TYPE_NONE>, - <211 IRQ_TYPE_NONE>, - <212 IRQ_TYPE_NONE>, - <213 IRQ_TYPE_NONE>, - <214 IRQ_TYPE_NONE>, - <215 IRQ_TYPE_NONE>, - <216 IRQ_TYPE_NONE>, - <217 IRQ_TYPE_NONE>, - <218 IRQ_TYPE_NONE>, - <219 IRQ_TYPE_NONE>, - <220 IRQ_TYPE_NONE>, - <221 IRQ_TYPE_NONE>, - <222 IRQ_TYPE_NONE>, - <223 IRQ_TYPE_NONE>, - <224 IRQ_TYPE_NONE>, - <225 IRQ_TYPE_NONE>, - <226 IRQ_TYPE_NONE>, - <227 IRQ_TYPE_NONE>, - <228 IRQ_TYPE_NONE>, - <229 IRQ_TYPE_NONE>, - <230 IRQ_TYPE_NONE>, - <231 IRQ_TYPE_NONE>, - <232 IRQ_TYPE_NONE>, - <233 IRQ_TYPE_NONE>, - <234 IRQ_TYPE_NONE>, - <235 IRQ_TYPE_NONE>; + interrupt-controller; + #interrupt-cells = <2>; gpio-controller; #gpio-cells = <2>; diff --git a/dts/src/arm/qcom-msm8960.dtsi b/dts/src/arm/qcom-msm8960.dtsi index 1733d8f40a..f2aeaccdc1 100644 --- a/dts/src/arm/qcom-msm8960.dtsi +++ b/dts/src/arm/qcom-msm8960.dtsi @@ -1,14 +1,14 @@ // SPDX-License-Identifier: GPL-2.0 /dts-v1/; -/include/ "skeleton.dtsi" - #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,gcc-msm8960.h> #include <dt-bindings/mfd/qcom-rpm.h> #include <dt-bindings/soc/qcom,gsbi.h> / { + #address-cells = <1>; + #size-cells = <1>; model = "Qualcomm MSM8960"; compatible = "qcom,msm8960"; interrupt-parent = <&intc>; @@ -44,6 +44,11 @@ }; }; + memory { + device_type = "memory"; + reg = <0x0 0x0>; + }; + cpu-pmu { compatible = "qcom,krait-pmu"; interrupts = <1 10 0x304>; diff --git a/dts/src/arm/qcom-msm8974-lge-nexus5-hammerhead.dts b/dts/src/arm/qcom-msm8974-lge-nexus5-hammerhead.dts index 51444c53fc..b3b04736a1 100644 --- a/dts/src/arm/qcom-msm8974-lge-nexus5-hammerhead.dts +++ b/dts/src/arm/qcom-msm8974-lge-nexus5-hammerhead.dts @@ -220,6 +220,20 @@ }; }; }; + + vreg_wlan: wlan-regulator { + compatible = "regulator-fixed"; + + regulator-name = "wl-reg"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&msmgpio 26 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&wlan_regulator_pin>; + }; }; &soc { @@ -242,6 +256,30 @@ }; }; + sdhc2_pin_a: sdhc2-pin-active { + clk { + pins = "sdc2_clk"; + drive-strength = <6>; + bias-disable; + }; + + cmd-data { + pins = "sdc2_cmd", "sdc2_data"; + drive-strength = <6>; + bias-pull-up; + }; + }; + + i2c1_pins: i2c1 { + mux { + pins = "gpio2", "gpio3"; + function = "blsp_i2c1"; + + drive-strength = <2>; + bias-disable; + }; + }; + i2c3_pins: i2c3 { mux { pins = "gpio10", "gpio11"; @@ -283,6 +321,32 @@ pinctrl-0 = <&sdhc1_pin_a>; }; + sdhci@f98a4900 { + status = "ok"; + + max-frequency = <100000000>; + bus-width = <4>; + non-removable; + vmmc-supply = <&vreg_wlan>; + vqmmc-supply = <&pm8941_s3>; + + pinctrl-names = "default"; + pinctrl-0 = <&sdhc2_pin_a>; + + #address-cells = <1>; + #size-cells = <0>; + + bcrmf@1 { + compatible = "brcm,bcm4339-fmac", "brcm,bcm4329-fmac"; + reg = <1>; + + brcm,drive-strength = <10>; + + pinctrl-names = "default"; + pinctrl-0 = <&wlan_sleep_clk_pin>; + }; + }; + gpio-keys { compatible = "gpio-keys"; input-name = "gpio-keys"; @@ -342,6 +406,24 @@ }; }; + i2c@f9923000 { + status = "ok"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + clock-frequency = <100000>; + qcom,src-freq = <50000000>; + + charger: bq24192@6b { + compatible = "ti,bq24192"; + reg = <0x6b>; + interrupts-extended = <&spmi_bus 0 0xd5 0 IRQ_TYPE_EDGE_FALLING>; + + omit-battery-class; + + usb_otg_vbus: usb-otg-vbus { }; + }; + }; + i2c@f9925000 { status = "ok"; pinctrl-names = "default"; @@ -359,6 +441,31 @@ amstaos,proximity-diodes = <0>; }; }; + + usb@f9a55000 { + status = "ok"; + + phys = <&usb_hs1_phy>; + phy-select = <&tcsr 0xb000 0>; + + extcon = <&charger>, <&usb_id>; + vbus-supply = <&usb_otg_vbus>; + + hnp-disable; + srp-disable; + adp-disable; + + ulpi { + phy@a { + status = "ok"; + + v1p8-supply = <&pm8941_l6>; + v3p3-supply = <&pm8941_l24>; + + qcom,init-seq = /bits/ 8 <0x1 0x64>; + }; + }; + }; }; &spmi_bus { @@ -371,6 +478,29 @@ bias-pull-up; power-source = <PM8941_GPIO_S3>; }; + + wlan_sleep_clk_pin: wl-sleep-clk { + pins = "gpio16"; + function = "func2"; + + output-high; + power-source = <PM8941_GPIO_S3>; + }; + + wlan_regulator_pin: wl-reg-active { + pins = "gpio17"; + function = "normal"; + + bias-disable; + power-source = <PM8941_GPIO_S3>; + }; + + otg { + gpio-hog; + gpios = <35 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "otg-gpio"; + }; }; }; }; diff --git a/dts/src/arm/qcom-msm8974.dtsi b/dts/src/arm/qcom-msm8974.dtsi index ca266a5f02..45b5c8ef03 100644 --- a/dts/src/arm/qcom-msm8974.dtsi +++ b/dts/src/arm/qcom-msm8974.dtsi @@ -6,9 +6,10 @@ #include <dt-bindings/clock/qcom,rpmcc.h> #include <dt-bindings/reset/qcom,gcc-msm8974.h> #include <dt-bindings/gpio/gpio.h> -#include "skeleton.dtsi" / { + #address-cells = <1>; + #size-cells = <1>; model = "Qualcomm MSM8974"; compatible = "qcom,msm8974"; interrupt-parent = <&intc>; @@ -130,6 +131,11 @@ }; }; + memory { + device_type = "memory"; + reg = <0x0 0x0>; + }; + thermal-zones { cpu-thermal0 { polling-delay-passive = <250>; @@ -706,6 +712,17 @@ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; }; + i2c@f9923000 { + status = "disabled"; + compatible = "qcom,i2c-qup-v2.1.1"; + reg = <0xf9923000 0x1000>; + interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c@f9924000 { status = "disabled"; compatible = "qcom,i2c-qup-v2.1.1"; diff --git a/dts/src/arm/qcom-pm8941.dtsi b/dts/src/arm/qcom-pm8941.dtsi index 2515c5c217..f198480c8e 100644 --- a/dts/src/arm/qcom-pm8941.dtsi +++ b/dts/src/arm/qcom-pm8941.dtsi @@ -63,43 +63,10 @@ compatible = "qcom,pm8941-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; + gpio-ranges = <&pm8941_gpios 0 0 36>; #gpio-cells = <2>; - interrupts = <0 0xc0 0 IRQ_TYPE_NONE>, - <0 0xc1 0 IRQ_TYPE_NONE>, - <0 0xc2 0 IRQ_TYPE_NONE>, - <0 0xc3 0 IRQ_TYPE_NONE>, - <0 0xc4 0 IRQ_TYPE_NONE>, - <0 0xc5 0 IRQ_TYPE_NONE>, - <0 0xc6 0 IRQ_TYPE_NONE>, - <0 0xc7 0 IRQ_TYPE_NONE>, - <0 0xc8 0 IRQ_TYPE_NONE>, - <0 0xc9 0 IRQ_TYPE_NONE>, - <0 0xca 0 IRQ_TYPE_NONE>, - <0 0xcb 0 IRQ_TYPE_NONE>, - <0 0xcc 0 IRQ_TYPE_NONE>, - <0 0xcd 0 IRQ_TYPE_NONE>, - <0 0xce 0 IRQ_TYPE_NONE>, - <0 0xcf 0 IRQ_TYPE_NONE>, - <0 0xd0 0 IRQ_TYPE_NONE>, - <0 0xd1 0 IRQ_TYPE_NONE>, - <0 0xd2 0 IRQ_TYPE_NONE>, - <0 0xd3 0 IRQ_TYPE_NONE>, - <0 0xd4 0 IRQ_TYPE_NONE>, - <0 0xd5 0 IRQ_TYPE_NONE>, - <0 0xd6 0 IRQ_TYPE_NONE>, - <0 0xd7 0 IRQ_TYPE_NONE>, - <0 0xd8 0 IRQ_TYPE_NONE>, - <0 0xd9 0 IRQ_TYPE_NONE>, - <0 0xda 0 IRQ_TYPE_NONE>, - <0 0xdb 0 IRQ_TYPE_NONE>, - <0 0xdc 0 IRQ_TYPE_NONE>, - <0 0xdd 0 IRQ_TYPE_NONE>, - <0 0xde 0 IRQ_TYPE_NONE>, - <0 0xdf 0 IRQ_TYPE_NONE>, - <0 0xe0 0 IRQ_TYPE_NONE>, - <0 0xe1 0 IRQ_TYPE_NONE>, - <0 0xe2 0 IRQ_TYPE_NONE>, - <0 0xe3 0 IRQ_TYPE_NONE>; + interrupt-controller; + #interrupt-cells = <2>; boost_bypass_n_pin: boost-bypass { pins = "gpio21"; diff --git a/dts/src/arm/qcom-pma8084.dtsi b/dts/src/arm/qcom-pma8084.dtsi index aac7e73b68..8f5ea7add2 100644 --- a/dts/src/arm/qcom-pma8084.dtsi +++ b/dts/src/arm/qcom-pma8084.dtsi @@ -32,28 +32,8 @@ reg = <0xc000>; gpio-controller; #gpio-cells = <2>; - interrupts = <0 0xc0 0 IRQ_TYPE_NONE>, - <0 0xc1 0 IRQ_TYPE_NONE>, - <0 0xc2 0 IRQ_TYPE_NONE>, - <0 0xc3 0 IRQ_TYPE_NONE>, - <0 0xc4 0 IRQ_TYPE_NONE>, - <0 0xc5 0 IRQ_TYPE_NONE>, - <0 0xc6 0 IRQ_TYPE_NONE>, - <0 0xc7 0 IRQ_TYPE_NONE>, - <0 0xc8 0 IRQ_TYPE_NONE>, - <0 0xc9 0 IRQ_TYPE_NONE>, - <0 0xca 0 IRQ_TYPE_NONE>, - <0 0xcb 0 IRQ_TYPE_NONE>, - <0 0xcc 0 IRQ_TYPE_NONE>, - <0 0xcd 0 IRQ_TYPE_NONE>, - <0 0xce 0 IRQ_TYPE_NONE>, - <0 0xcf 0 IRQ_TYPE_NONE>, - <0 0xd0 0 IRQ_TYPE_NONE>, - <0 0xd1 0 IRQ_TYPE_NONE>, - <0 0xd2 0 IRQ_TYPE_NONE>, - <0 0xd3 0 IRQ_TYPE_NONE>, - <0 0xd4 0 IRQ_TYPE_NONE>, - <0 0xd5 0 IRQ_TYPE_NONE>; + interrupt-controller; + #interrupt-cells = <2>; }; pma8084_mpps: mpps@a000 { diff --git a/dts/src/arm/r7s9210-rza2mevb.dts b/dts/src/arm/r7s9210-rza2mevb.dts new file mode 100644 index 0000000000..991e09de12 --- /dev/null +++ b/dts/src/arm/r7s9210-rza2mevb.dts @@ -0,0 +1,82 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the RZA2MEVB board + * + * Copyright (C) 2018 Renesas Electronics + * + */ + +/dts-v1/; +#include "r7s9210.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/r7s9210-pinctrl.h> + +/ { + model = "RZA2MEVB"; + compatible = "renesas,rza2mevb", "renesas,r7s9210"; + + aliases { + serial0 = &scif4; + }; + + chosen { + bootargs = "ignore_loglevel"; + stdout-path = "serial0:115200n8"; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0x40000000 0x00800000>; /* HyperRAM */ + }; + + lbsc { + #address-cells = <1>; + #size-cells = <1>; + }; + + leds { + compatible = "gpio-leds"; + + red { + gpios = <&pinctrl RZA2_PIN(PORT6, 0) GPIO_ACTIVE_HIGH>; + }; + green { + gpios = <&pinctrl RZA2_PIN(PORTC, 1) GPIO_ACTIVE_HIGH>; + }; + }; +}; + +/* EXTAL */ +&extal_clk { + clock-frequency = <24000000>; /* 24MHz */ +}; + +/* RTC_X1 */ +&rtc_x1_clk { + clock-frequency = <32768>; +}; + +&pinctrl { + /* Serial Console */ + scif4_pins: serial4 { + pinmux = <RZA2_PINMUX(PORT9, 0, 4)>, /* TxD4 */ + <RZA2_PINMUX(PORT9, 1, 4)>; /* RxD4 */ + }; +}; + +/* High resolution System tick timers */ +&ostm0 { + status = "okay"; +}; + +&ostm1 { + status = "okay"; +}; + +/* Serial Console */ +&scif4 { + pinctrl-names = "default"; + pinctrl-0 = <&scif4_pins>; + + status = "okay"; +}; diff --git a/dts/src/arm/r7s9210.dtsi b/dts/src/arm/r7s9210.dtsi new file mode 100644 index 0000000000..22baa96f59 --- /dev/null +++ b/dts/src/arm/r7s9210.dtsi @@ -0,0 +1,218 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the R7S9210 SoC + * + * Copyright (C) 2018 Renesas Electronics Corporation + * + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/r7s9210-cpg-mssr.h> + +/ { + compatible = "renesas,r7s9210"; + interrupt-parent = <&gic>; + #address-cells = <1>; + #size-cells = <1>; + + /* External clocks */ + extal_clk: extal { + #clock-cells = <0>; + compatible = "fixed-clock"; + /* Value must be set by board */ + clock-frequency = <0>; + }; + + rtc_x1_clk: rtc_x1 { + #clock-cells = <0>; + compatible = "fixed-clock"; + /* If clk present, value (32678) must be set by board */ + clock-frequency = <0>; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0>; + clock-frequency = <528000000>; + next-level-cache = <&L2>; + }; + }; + + soc { + compatible = "simple-bus"; + interrupt-parent = <&gic>; + + #address-cells = <1>; + #size-cells = <1>; + ranges; + + L2: cache-controller@1f003000 { + compatible = "arm,pl310-cache"; + reg = <0x1f003000 0x1000>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + arm,early-bresp-disable; + arm,full-line-zero-disable; + cache-unified; + cache-level = <2>; + }; + + scif0: serial@e8007000 { + compatible = "renesas,scif-r7s9210"; + reg = <0xe8007000 0x18>; + interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "eri", "rxi", "txi", + "bri", "dri", "tei"; + clocks = <&cpg CPG_MOD 47>; + clock-names = "fck"; + power-domains = <&cpg>; + status = "disabled"; + }; + + scif1: serial@e8007800 { + compatible = "renesas,scif-r7s9210"; + reg = <0xe8007800 0x18>; + interrupts = <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "eri", "rxi", "txi", + "bri", "dri", "tei"; + clocks = <&cpg CPG_MOD 46>; + clock-names = "fck"; + power-domains = <&cpg>; + status = "disabled"; + }; + + scif2: serial@e8008000 { + compatible = "renesas,scif-r7s9210"; + reg = <0xe8008000 0x18>; + interrupts = <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "eri", "rxi", "txi", + "bri", "dri", "tei"; + clocks = <&cpg CPG_MOD 45>; + clock-names = "fck"; + power-domains = <&cpg>; + status = "disabled"; + }; + + scif3: serial@e8008800 { + compatible = "renesas,scif-r7s9210"; + reg = <0xe8008800 0x18>; + interrupts = <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 285 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "eri", "rxi", "txi", + "bri", "dri", "tei"; + clocks = <&cpg CPG_MOD 44>; + clock-names = "fck"; + power-domains = <&cpg>; + status = "disabled"; + }; + + scif4: serial@e8009000 { + compatible = "renesas,scif-r7s9210"; + reg = <0xe8009000 0x18>; + interrupts = <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 291 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "eri", "rxi", "txi", + "bri", "dri", "tei"; + clocks = <&cpg CPG_MOD 43>; + clock-names = "fck"; + power-domains = <&cpg>; + status = "disabled"; + }; + + ostm0: timer@e803b000 { + compatible = "renesas,r7s9210-ostm", "renesas,ostm"; + reg = <0xe803b000 0x30>; + interrupts = <GIC_SPI 56 IRQ_TYPE_EDGE_RISING>; + clocks = <&cpg CPG_MOD 36>; + clock-names = "ostm0"; + power-domains = <&cpg>; + status = "disabled"; + }; + + ostm1: timer@e803c000 { + compatible = "renesas,r7s9210-ostm", "renesas,ostm"; + reg = <0xe803c000 0x30>; + interrupts = <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>; + clocks = <&cpg CPG_MOD 35>; + clock-names = "ostm1"; + power-domains = <&cpg>; + status = "disabled"; + }; + + ostm2: timer@e803d000 { + compatible = "renesas,r7s9210-ostm", "renesas,ostm"; + reg = <0xe803d000 0x30>; + interrupts = <GIC_SPI 58 IRQ_TYPE_EDGE_RISING>; + clocks = <&cpg CPG_MOD 34>; + clock-names = "ostm2"; + power-domains = <&cpg>; + status = "disabled"; + }; + + gic: interrupt-controller@e8221000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0xe8221000 0x1000>, + <0xe8222000 0x1000>; + }; + + cpg: clock-controller@fcfe0010 { + compatible = "renesas,r7s9210-cpg-mssr"; + reg = <0xfcfe0010 0x455>; + clocks = <&extal_clk>; + clock-names = "extal"; + #clock-cells = <2>; + #power-domain-cells = <0>; + }; + + wdt: watchdog@fcfe7000 { + compatible = "renesas,r7s9210-wdt", "renesas,rza-wdt"; + reg = <0xfcfe7000 0x26>; + interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_CORE R7S9210_CLK_P0>; + }; + + bsid: chipid@fcfe8004 { + compatible = "renesas,bsid"; + reg = <0xfcfe8004 4>; + }; + + pinctrl: pin-controller@fcffe000 { + compatible = "renesas,r7s9210-pinctrl"; + reg = <0xfcffe000 0x1000>; + + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl 0 0 176>; + }; + }; +}; diff --git a/dts/src/arm/r8a7743.dtsi b/dts/src/arm/r8a7743.dtsi index 3adc158a40..de981d629b 100644 --- a/dts/src/arm/r8a7743.dtsi +++ b/dts/src/arm/r8a7743.dtsi @@ -15,25 +15,6 @@ #address-cells = <2>; #size-cells = <2>; - aliases { - i2c0 = &i2c0; - i2c1 = &i2c1; - i2c2 = &i2c2; - i2c3 = &i2c3; - i2c4 = &i2c4; - i2c5 = &i2c5; - i2c6 = &iic0; - i2c7 = &iic1; - i2c8 = &iic3; - spi0 = &qspi; - spi1 = &msiof0; - spi2 = &msiof1; - spi3 = &msiof2; - vin0 = &vin0; - vin1 = &vin1; - vin2 = &vin2; - }; - /* * The external audio clocks are configured as 0 Hz fixed frequency * clocks by default. @@ -154,6 +135,16 @@ #size-cells = <2>; ranges; + rwdt: watchdog@e6020000 { + compatible = "renesas,r8a7743-wdt", + "renesas,rcar-gen2-wdt"; + reg = <0 0xe6020000 0 0x0c>; + clocks = <&cpg CPG_MOD 402>; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 402>; + status = "disabled"; + }; + gpio0: gpio@e6050000 { compatible = "renesas,gpio-r8a7743", "renesas,rcar-gen2-gpio"; @@ -310,16 +301,6 @@ reg = <0 0xe6160000 0 0x100>; }; - rwdt: watchdog@e6020000 { - compatible = "renesas,r8a7743-wdt", - "renesas,rcar-gen2-wdt"; - reg = <0 0xe6020000 0 0x0c>; - clocks = <&cpg CPG_MOD 402>; - power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; - resets = <&cpg 402>; - status = "disabled"; - }; - sysc: system-controller@e6180000 { compatible = "renesas,r8a7743-sysc"; reg = <0 0xe6180000 0 0x200>; @@ -564,9 +545,7 @@ /* doesn't need pinmux */ #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,iic-r8a7743", - "renesas,rcar-gen2-iic", - "renesas,rmobile-iic"; + compatible = "renesas,iic-r8a7743"; reg = <0 0xe60b0000 0 0x425>; interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 926>; diff --git a/dts/src/arm/r8a7744.dtsi b/dts/src/arm/r8a7744.dtsi index 04148d608f..fa74a26210 100644 --- a/dts/src/arm/r8a7744.dtsi +++ b/dts/src/arm/r8a7744.dtsi @@ -998,6 +998,54 @@ status = "disabled"; }; + msiof0: spi@e6e20000 { + compatible = "renesas,msiof-r8a7744", + "renesas,rcar-gen2-msiof"; + reg = <0 0xe6e20000 0 0x0064>; + interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 000>; + dmas = <&dmac0 0x51>, <&dmac0 0x52>, + <&dmac1 0x51>, <&dmac1 0x52>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + #address-cells = <1>; + #size-cells = <0>; + resets = <&cpg 000>; + status = "disabled"; + }; + + msiof1: spi@e6e10000 { + compatible = "renesas,msiof-r8a7744", + "renesas,rcar-gen2-msiof"; + reg = <0 0xe6e10000 0 0x0064>; + interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 208>; + dmas = <&dmac0 0x55>, <&dmac0 0x56>, + <&dmac1 0x55>, <&dmac1 0x56>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + #address-cells = <1>; + #size-cells = <0>; + resets = <&cpg 208>; + status = "disabled"; + }; + + msiof2: spi@e6e00000 { + compatible = "renesas,msiof-r8a7744", + "renesas,rcar-gen2-msiof"; + reg = <0 0xe6e00000 0 0x0064>; + interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 205>; + dmas = <&dmac0 0x41>, <&dmac0 0x42>, + <&dmac1 0x41>, <&dmac1 0x42>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + #address-cells = <1>; + #size-cells = <0>; + resets = <&cpg 205>; + status = "disabled"; + }; + pwm0: pwm@e6e30000 { compatible = "renesas,pwm-r8a7744", "renesas,pwm-rcar"; reg = <0 0xe6e30000 0 0x8>; @@ -1068,54 +1116,6 @@ status = "disabled"; }; - msiof0: spi@e6e20000 { - compatible = "renesas,msiof-r8a7744", - "renesas,rcar-gen2-msiof"; - reg = <0 0xe6e20000 0 0x0064>; - interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 000>; - dmas = <&dmac0 0x51>, <&dmac0 0x52>, - <&dmac1 0x51>, <&dmac1 0x52>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; - #address-cells = <1>; - #size-cells = <0>; - resets = <&cpg 000>; - status = "disabled"; - }; - - msiof1: spi@e6e10000 { - compatible = "renesas,msiof-r8a7744", - "renesas,rcar-gen2-msiof"; - reg = <0 0xe6e10000 0 0x0064>; - interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 208>; - dmas = <&dmac0 0x55>, <&dmac0 0x56>, - <&dmac1 0x55>, <&dmac1 0x56>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; - #address-cells = <1>; - #size-cells = <0>; - resets = <&cpg 208>; - status = "disabled"; - }; - - msiof2: spi@e6e00000 { - compatible = "renesas,msiof-r8a7744", - "renesas,rcar-gen2-msiof"; - reg = <0 0xe6e00000 0 0x0064>; - interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 205>; - dmas = <&dmac0 0x41>, <&dmac0 0x42>, - <&dmac1 0x41>, <&dmac1 0x42>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; - #address-cells = <1>; - #size-cells = <0>; - resets = <&cpg 205>; - status = "disabled"; - }; - can0: can@e6e80000 { compatible = "renesas,can-r8a7744", "renesas,rcar-gen2-can"; @@ -1589,33 +1589,6 @@ resets = <&cpg 408>; }; - vsp@fe928000 { - compatible = "renesas,vsp1"; - reg = <0 0xfe928000 0 0x8000>; - interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 131>; - power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; - resets = <&cpg 131>; - }; - - vsp@fe930000 { - compatible = "renesas,vsp1"; - reg = <0 0xfe930000 0 0x8000>; - interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 128>; - power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; - resets = <&cpg 128>; - }; - - vsp@fe938000 { - compatible = "renesas,vsp1"; - reg = <0 0xfe938000 0 0x8000>; - interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 127>; - power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; - resets = <&cpg 127>; - }; - pciec: pcie@fe000000 { compatible = "renesas,pcie-r8a7744", "renesas,pcie-rcar-gen2"; @@ -1644,9 +1617,42 @@ status = "disabled"; }; + vsp@fe928000 { + compatible = "renesas,vsp1"; + reg = <0 0xfe928000 0 0x8000>; + interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 131>; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 131>; + }; + + vsp@fe930000 { + compatible = "renesas,vsp1"; + reg = <0 0xfe930000 0 0x8000>; + interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 128>; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 128>; + }; + + vsp@fe938000 { + compatible = "renesas,vsp1"; + reg = <0 0xfe938000 0 0x8000>; + interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 127>; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 127>; + }; + du: display@feb00000 { - reg = <0 0xfeb00000 0 0x40000>, - <0 0xfeb90000 0 0x1c>; + compatible = "renesas,du-r8a7744"; + reg = <0 0xfeb00000 0 0x40000>; + interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>; + clock-names = "du.0", "du.1"; + status = "disabled"; ports { #address-cells = <1>; @@ -1660,10 +1666,36 @@ port@1 { reg = <1>; du_out_lvds0: endpoint { + remote-endpoint = <&lvds0_in>; + }; + }; + }; + }; + + lvds0: lvds@feb90000 { + compatible = "renesas,r8a7744-lvds"; + reg = <0 0xfeb90000 0 0x1c>; + clocks = <&cpg CPG_MOD 726>; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 726>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + lvds0_in: endpoint { + remote-endpoint = <&du_out_lvds0>; + }; + }; + port@1 { + reg = <1>; + lvds0_out: endpoint { }; }; }; - /* placeholder */ }; prr: chipid@ff000044 { diff --git a/dts/src/arm/r8a77470-iwg23s-sbc.dts b/dts/src/arm/r8a77470-iwg23s-sbc.dts index 40b7f98d60..77d18242ef 100644 --- a/dts/src/arm/r8a77470-iwg23s-sbc.dts +++ b/dts/src/arm/r8a77470-iwg23s-sbc.dts @@ -84,12 +84,30 @@ clock-frequency = <20000000>; }; +&i2c3 { + pinctrl-0 = <&i2c3_pins>; + pinctrl-names = "default"; + + status = "okay"; + clock-frequency = <400000>; + + rtc@51 { + compatible = "nxp,pcf85263"; + reg = <0x51>; + }; +}; + &pfc { avb_pins: avb { groups = "avb_mdio", "avb_gmii_tx_rx"; function = "avb"; }; + i2c3_pins: i2c3 { + groups = "i2c3_c"; + function = "i2c3"; + }; + mmc_pins_uhs: mmc_uhs { groups = "mmc_data8", "mmc_ctrl"; function = "mmc"; diff --git a/dts/src/arm/r8a7778.dtsi b/dts/src/arm/r8a7778.dtsi index 05db0ccad7..10d996d294 100644 --- a/dts/src/arm/r8a7778.dtsi +++ b/dts/src/arm/r8a7778.dtsi @@ -367,6 +367,30 @@ status = "disabled"; }; + hscif0: serial@ffe48000 { + compatible = "renesas,hscif-r8a7778", + "renesas,rcar-gen1-hscif", "renesas,hscif"; + reg = <0xffe48000 96>; + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp0_clks R8A7778_CLK_HSCIF0>, + <&cpg_clocks R8A7778_CLK_S>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + power-domains = <&cpg_clocks>; + status = "disabled"; + }; + + hscif1: serial@ffe49000 { + compatible = "renesas,hscif-r8a7778", + "renesas,rcar-gen1-hscif", "renesas,hscif"; + reg = <0xffe49000 96>; + interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp0_clks R8A7778_CLK_HSCIF1>, + <&cpg_clocks R8A7778_CLK_S>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + power-domains = <&cpg_clocks>; + status = "disabled"; + }; + mmcif: mmc@ffe4e000 { compatible = "renesas,mmcif-r8a7778", "renesas,sh-mmcif"; reg = <0xffe4e000 0x100>; @@ -535,6 +559,8 @@ <&cpg_clocks R8A7778_CLK_P>, <&cpg_clocks R8A7778_CLK_P>, <&cpg_clocks R8A7778_CLK_P>, + <&cpg_clocks R8A7778_CLK_S>, + <&cpg_clocks R8A7778_CLK_S>, <&cpg_clocks R8A7778_CLK_P>, <&cpg_clocks R8A7778_CLK_P>, <&cpg_clocks R8A7778_CLK_P>, @@ -551,6 +577,7 @@ R8A7778_CLK_SCIF0 R8A7778_CLK_SCIF1 R8A7778_CLK_SCIF2 R8A7778_CLK_SCIF3 R8A7778_CLK_SCIF4 R8A7778_CLK_SCIF5 + R8A7778_CLK_HSCIF0 R8A7778_CLK_HSCIF1 R8A7778_CLK_TMU0 R8A7778_CLK_TMU1 R8A7778_CLK_TMU2 R8A7778_CLK_SSI0 R8A7778_CLK_SSI1 R8A7778_CLK_SSI2 @@ -560,6 +587,7 @@ clock-output-names = "i2c0", "i2c1", "i2c2", "i2c3", "scif0", "scif1", "scif2", "scif3", "scif4", "scif5", + "hscif0", "hscif1", "tmu0", "tmu1", "tmu2", "ssi0", "ssi1", "ssi2", "ssi3", "sru", "hspi"; }; diff --git a/dts/src/arm/r8a7779.dtsi b/dts/src/arm/r8a7779.dtsi index 3bc133d948..3ff2592075 100644 --- a/dts/src/arm/r8a7779.dtsi +++ b/dts/src/arm/r8a7779.dtsi @@ -287,6 +287,32 @@ status = "disabled"; }; + hscif0: serial@ffe48000 { + compatible = "renesas,hscif-r8a7779", + "renesas,rcar-gen1-hscif", "renesas,hscif"; + reg = <0xffe48000 96>; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp0_clks R8A7779_CLK_HSCIF0>, + <&cpg_clocks R8A7779_CLK_S>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + power-domains = <&cpg_clocks>; + status = "disabled"; + }; + + hscif1: serial@ffe49000 { + compatible = "renesas,hscif-r8a7779", + "renesas,rcar-gen1-hscif", "renesas,hscif"; + reg = <0xffe49000 96>; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp0_clks R8A7779_CLK_HSCIF1>, + <&cpg_clocks R8A7779_CLK_S>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + power-domains = <&cpg_clocks>; + status = "disabled"; + }; + pfc: pin-controller@fffc0000 { compatible = "renesas,pfc-r8a7779"; reg = <0xfffc0000 0x23c>; diff --git a/dts/src/arm/r8a7790-stout.dts b/dts/src/arm/r8a7790-stout.dts index 629da4cee1..7a7d3b84d1 100644 --- a/dts/src/arm/r8a7790-stout.dts +++ b/dts/src/arm/r8a7790-stout.dts @@ -94,9 +94,8 @@ status = "okay"; clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&cpg CPG_MOD 722>, - <&cpg CPG_MOD 726>, <&cpg CPG_MOD 725>, <&osc1_clk>; - clock-names = "du.0", "du.1", "du.2", "lvds.0", "lvds.1", "dclkin.0"; + clock-names = "du.0", "du.1", "du.2", "dclkin.0"; ports { port@0 { @@ -104,11 +103,21 @@ remote-endpoint = <&adv7511_in>; }; }; + }; +}; + +&lvds0 { + ports { port@1 { lvds_connector0: endpoint { }; }; - port@2 { + }; +}; + +&lvds1 { + ports { + port@1 { lvds_connector1: endpoint { }; }; diff --git a/dts/src/arm/rk3036-kylin.dts b/dts/src/arm/rk3036-kylin.dts index 0fd19f9723..0173eb11ec 100644 --- a/dts/src/arm/rk3036-kylin.dts +++ b/dts/src/arm/rk3036-kylin.dts @@ -310,7 +310,6 @@ }; &i2s { - #sound-dai-cells = <0>; status = "okay"; }; diff --git a/dts/src/arm/rk3036.dtsi b/dts/src/arm/rk3036.dtsi index d560fc4051..59c90863b0 100644 --- a/dts/src/arm/rk3036.dtsi +++ b/dts/src/arm/rk3036.dtsi @@ -289,6 +289,7 @@ dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&i2s_bus>; + #sound-dai-cells = <0>; status = "disabled"; }; diff --git a/dts/src/arm/rk3066a-bqcurie2.dts b/dts/src/arm/rk3066a-bqcurie2.dts index 1c925f20db..0a56a2f1bc 100644 --- a/dts/src/arm/rk3066a-bqcurie2.dts +++ b/dts/src/arm/rk3066a-bqcurie2.dts @@ -171,7 +171,6 @@ pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus4>; bus-width = <4>; - disable-wp; }; &pwm3 { diff --git a/dts/src/arm/rk3066a-mk808.dts b/dts/src/arm/rk3066a-mk808.dts index b6a8a82d21..9d2216d71f 100644 --- a/dts/src/arm/rk3066a-mk808.dts +++ b/dts/src/arm/rk3066a-mk808.dts @@ -101,7 +101,6 @@ &mmc1 { bus-width = <4>; - disable-wp; non-removable; pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus4>; pinctrl-names = "default"; diff --git a/dts/src/arm/rk3066a-rayeager.dts b/dts/src/arm/rk3066a-rayeager.dts index cd126b927b..949fa80058 100644 --- a/dts/src/arm/rk3066a-rayeager.dts +++ b/dts/src/arm/rk3066a-rayeager.dts @@ -147,7 +147,6 @@ &emmc { bus-width = <8>; cap-mmc-highspeed; - disable-wp; non-removable; pinctrl-names = "default"; pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_rst>; @@ -309,7 +308,6 @@ &mmc1 { bus-width = <4>; - disable-wp; non-removable; pinctrl-names = "default"; pinctrl-0 = <&sd1_clk>, <&sd1_cmd>, <&sd1_bus4>; diff --git a/dts/src/arm/rk3066a.dtsi b/dts/src/arm/rk3066a.dtsi index 30dc8af0bd..653127a377 100644 --- a/dts/src/arm/rk3066a.dtsi +++ b/dts/src/arm/rk3066a.dtsi @@ -44,6 +44,11 @@ }; }; + display-subsystem { + compatible = "rockchip,display-subsystem"; + ports = <&vop0_out>, <&vop1_out>; + }; + sram: sram@10080000 { compatible = "mmio-sram"; reg = <0x10080000 0x10000>; @@ -57,6 +62,48 @@ }; }; + vop0: vop@1010c000 { + compatible = "rockchip,rk3066-vop"; + reg = <0x1010c000 0x19c>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru ACLK_LCDC0>, + <&cru DCLK_LCDC0>, + <&cru HCLK_LCDC0>; + clock-names = "aclk_vop", "dclk_vop", "hclk_vop"; + power-domains = <&power RK3066_PD_VIO>; + resets = <&cru SRST_LCDC0_AXI>, + <&cru SRST_LCDC0_AHB>, + <&cru SRST_LCDC0_DCLK>; + reset-names = "axi", "ahb", "dclk"; + status = "disabled"; + + vop0_out: port { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + vop1: vop@1010e000 { + compatible = "rockchip,rk3066-vop"; + reg = <0x1010e000 0x19c>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru ACLK_LCDC1>, + <&cru DCLK_LCDC1>, + <&cru HCLK_LCDC1>; + clock-names = "aclk_vop", "dclk_vop", "hclk_vop"; + power-domains = <&power RK3066_PD_VIO>; + resets = <&cru SRST_LCDC1_AXI>, + <&cru SRST_LCDC1_AHB>, + <&cru SRST_LCDC1_DCLK>; + reset-names = "axi", "ahb", "dclk"; + status = "disabled"; + + vop1_out: port { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + i2s0: i2s@10118000 { compatible = "rockchip,rk3066-i2s"; reg = <0x10118000 0x2000>; @@ -669,6 +716,7 @@ <&cru SCLK_CIF0>, <&cru ACLK_CIF0>, <&cru HCLK_CIF0>, + <&cru HCLK_HDMI>, <&cru ACLK_IPP>, <&cru HCLK_IPP>, <&cru ACLK_RGA>, diff --git a/dts/src/arm/rk3188-bqedison2qc.dts b/dts/src/arm/rk3188-bqedison2qc.dts index a7477a09fb..c8b62bbd6a 100644 --- a/dts/src/arm/rk3188-bqedison2qc.dts +++ b/dts/src/arm/rk3188-bqedison2qc.dts @@ -227,7 +227,6 @@ &emmc { bus-width = <8>; cap-mmc-highspeed; - disable-wp; non-removable; pinctrl-names = "default"; pinctrl-0 = <&emmc_clk &emmc_cmd>; @@ -408,6 +407,21 @@ &i2c2 { clock-frequency = <400000>; status = "okay"; + + ft5606: touchscreen@3e { + compatible = "edt,edt-ft5506"; + reg = <0x3e>; + interrupt-parent = <&gpio1>; + interrupts = <RK_PB7 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&tp_int &tp_rst>; + reset-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_LOW>; + touchscreen-inverted-y; + /* hw ts resolution does not match display */ + touchscreen-size-y = <1024>; + touchscreen-size-x = <768>; + touchscreen-swapped-x-y; + }; }; &i2c3 { @@ -446,7 +460,6 @@ &mmc1 { bus-width = <4>; cap-sd-highspeed; - cap-mmc-highspeed; keep-power-in-suspend; mmc-pwrseq = <&sdio_pwrseq>; non-removable; @@ -526,7 +539,7 @@ }; cif1_pdn: cif1-pdn { - rockchip,pins = <3 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <3 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; }; cif_avdd_en: cif-avdd-en { diff --git a/dts/src/arm/rk3188-px3-evb.dts b/dts/src/arm/rk3188-px3-evb.dts index 9ae65c767c..c0eaa9c549 100644 --- a/dts/src/arm/rk3188-px3-evb.dts +++ b/dts/src/arm/rk3188-px3-evb.dts @@ -62,7 +62,6 @@ &emmc { bus-width = <8>; cap-mmc-highspeed; - disable-wp; non-removable; pinctrl-names = "default"; pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_rst>; diff --git a/dts/src/arm/rk3229-evb.dts b/dts/src/arm/rk3229-evb.dts index 4df7accc3a..350497a3ca 100644 --- a/dts/src/arm/rk3229-evb.dts +++ b/dts/src/arm/rk3229-evb.dts @@ -137,7 +137,6 @@ &emmc { cap-mmc-highspeed; - disable-wp; non-removable; status = "okay"; }; diff --git a/dts/src/arm/rk3288-fennec.dts b/dts/src/arm/rk3288-fennec.dts index b1b56dfdfd..29af26e6d4 100644 --- a/dts/src/arm/rk3288-fennec.dts +++ b/dts/src/arm/rk3288-fennec.dts @@ -37,7 +37,6 @@ &emmc { bus-width = <8>; cap-mmc-highspeed; - disable-wp; non-removable; pinctrl-names = "default"; pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>; diff --git a/dts/src/arm/rk3288-firefly-reload.dts b/dts/src/arm/rk3288-firefly-reload.dts index 58ea8bed04..3a646c5f4f 100644 --- a/dts/src/arm/rk3288-firefly-reload.dts +++ b/dts/src/arm/rk3288-firefly-reload.dts @@ -254,7 +254,6 @@ bus-width = <4>; cap-sd-highspeed; cap-sdio-irq; - disable-wp; mmc-pwrseq = <&sdio_pwrseq>; non-removable; pinctrl-names = "default"; diff --git a/dts/src/arm/rk3288-miqi.dts b/dts/src/arm/rk3288-miqi.dts index 504ab1177a..fb7365b604 100644 --- a/dts/src/arm/rk3288-miqi.dts +++ b/dts/src/arm/rk3288-miqi.dts @@ -87,7 +87,6 @@ &emmc { bus-width = <8>; cap-mmc-highspeed; - disable-wp; non-removable; pinctrl-names = "default"; pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_pwr>, <&emmc_bus8>; diff --git a/dts/src/arm/rk3288-popmetal.dts b/dts/src/arm/rk3288-popmetal.dts index 596435e031..6a51940398 100644 --- a/dts/src/arm/rk3288-popmetal.dts +++ b/dts/src/arm/rk3288-popmetal.dts @@ -109,7 +109,6 @@ &emmc { bus-width = <8>; cap-mmc-highspeed; - disable-wp; mmc-ddr-1_8v; mmc-hs200-1_8v; non-removable; diff --git a/dts/src/arm/rk3288-rock2-square.dts b/dts/src/arm/rk3288-rock2-square.dts index 6a30cadad8..5b7e1c9e92 100644 --- a/dts/src/arm/rk3288-rock2-square.dts +++ b/dts/src/arm/rk3288-rock2-square.dts @@ -133,7 +133,6 @@ bus-width = <4>; cap-sd-highspeed; cap-sdio-irq; - disable-wp; mmc-pwrseq = <&sdio_pwrseq>; non-removable; pinctrl-names = "default"; diff --git a/dts/src/arm/rk3288-tinker-s.dts b/dts/src/arm/rk3288-tinker-s.dts index 37093922b4..d97da89bcd 100644 --- a/dts/src/arm/rk3288-tinker-s.dts +++ b/dts/src/arm/rk3288-tinker-s.dts @@ -15,7 +15,6 @@ &emmc { bus-width = <8>; cap-mmc-highspeed; - disable-wp; non-removable; pinctrl-names = "default"; pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>; diff --git a/dts/src/arm/rk3288-veyron.dtsi b/dts/src/arm/rk3288-veyron.dtsi index d8bf939a3a..0bc2409f69 100644 --- a/dts/src/arm/rk3288-veyron.dtsi +++ b/dts/src/arm/rk3288-veyron.dtsi @@ -10,6 +10,10 @@ #include "rk3288.dtsi" / { + chosen { + stdout-path = "serial2:115200n8"; + }; + /* * The default coreboot on veyron devices ignores memory@0 nodes * and would instead create another memory node. diff --git a/dts/src/arm/rk3288-vyasa.dts b/dts/src/arm/rk3288-vyasa.dts index 4856a9fc0a..40b232eb50 100644 --- a/dts/src/arm/rk3288-vyasa.dts +++ b/dts/src/arm/rk3288-vyasa.dts @@ -121,7 +121,6 @@ &emmc { bus-width = <8>; cap-mmc-highspeed; - disable-wp; non-removable; pinctrl-names = "default"; pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>; diff --git a/dts/src/arm/rv1108-elgin-r1.dts b/dts/src/arm/rv1108-elgin-r1.dts new file mode 100644 index 0000000000..1c4507b66f --- /dev/null +++ b/dts/src/arm/rv1108-elgin-r1.dts @@ -0,0 +1,208 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/* + * Copyright (C) 2018 O.S. Systems Software LTDA. + */ + +/dts-v1/; + +#include "rv1108.dtsi" + +/ { + model = "Elgin RV1108 R1 board"; + compatible = "elgin,rv1108-r1", "rockchip,rv1108"; + + memory@60000000 { + device_type = "memory"; + reg = <0x60000000 0x08000000>; + }; + + chosen { + stdout-path = "serial2:1500000n8"; + }; + + vcc_sys: vsys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vsys"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + }; +}; + +&cpu0 { + cpu-supply = <&vdd_core>; +}; + +&emmc { + bus-width = <8>; + cap-mmc-highspeed; + disable-wp; + no-sd; + no-sdio; + non-removable; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>; + status = "okay"; +}; + +&gmac { + clock_in_out = "output"; + pinctrl-names = "default"; + pinctrl-0 = <&rmii_pins>; + snps,reset-gpio = <&gpio1 RK_PC1 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + status = "okay"; +}; + +&i2c0 { + clock-frequency = <400000>; + i2c-scl-rising-time-ns = <275>; + i2c-scl-falling-time-ns = <16>; + status = "okay"; + + rk805: pmic@18 { + compatible = "rockchip,rk805"; + reg = <0x18>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PB4 IRQ_TYPE_LEVEL_LOW>; + rockchip,system-power-controller; + + vcc1-supply = <&vcc_sys>; + vcc2-supply = <&vcc_sys>; + vcc3-supply = <&vcc_sys>; + vcc4-supply = <&vcc_sys>; + vcc5-supply = <&vdd_buck2>; + vcc6-supply = <&vdd_buck2>; + + regulators { + vdd_core: DCDC_REG1 { + regulator-name= "vdd_core"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vdd_buck2: DCDC_REG2 { + regulator-name= "vdd_buck2"; + regulator-min-microvolt = <2200000>; + regulator-max-microvolt = <2200000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name= "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_io: DCDC_REG4 { + regulator-name= "vcc_io"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vdd_10: LDO_REG1 { + regulator-name= "vdd_10"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_18: LDO_REG2 { + regulator-name= "vcc_18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd10_pmu: LDO_REG3 { + regulator-name= "vdd10_pmu"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + }; + }; +}; + +&spi { + pinctrl-names = "default"; + pinctrl-0 = <&spim1_clk &spim1_cs0 &spim1_tx &spim1_rx>; + status = "okay"; + + dh2228fv: dac@0 { + compatible = "rohm,dh2228fv"; + reg = <0>; + spi-max-frequency = <24000000>; + spi-cpha; + spi-cpol; + }; +}; + +&u2phy { + status = "okay"; + + u2phy_host: host-port { + status = "okay"; + }; + + u2phy_otg: otg-port { + status = "okay"; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer>; + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&usb_host_ehci { + status = "okay"; +}; + +&usb_host_ohci { + status = "okay"; +}; + +&usb_otg { + status = "okay"; +}; diff --git a/dts/src/arm/rv1108-evb.dts b/dts/src/arm/rv1108-evb.dts index 203d83e3bb..30f3d0470a 100644 --- a/dts/src/arm/rv1108-evb.dts +++ b/dts/src/arm/rv1108-evb.dts @@ -97,8 +97,8 @@ regulator-always-on; regulator-boot-on; regulator-state-mem { - regulator-state-enabled; - regulator-state-uv = <900000>; + regulator-on-in-suspend; + regulator-suspend-microvolt = <900000>; }; }; @@ -107,7 +107,7 @@ regulator-min-microvolt = <700000>; regulator-max-microvolt = <2000000>; regulator-state-mem { - regulator-state-disabled; + regulator-off-in-suspend; }; }; @@ -116,7 +116,7 @@ regulator-always-on; regulator-boot-on; regulator-state-mem { - regulator-state-enabled; + regulator-on-in-suspend; }; }; @@ -127,8 +127,8 @@ regulator-always-on; regulator-boot-on; regulator-state-mem { - regulator-state-enabled; - regulator-state-uv = <3300000>; + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; }; }; @@ -139,7 +139,7 @@ regulator-always-on; regulator-boot-on; regulator-state-mem { - regulator-state-disabled; + regulator-off-in-suspend; }; }; @@ -150,7 +150,7 @@ regulator-always-on; regulator-boot-on; regulator-state-mem { - regulator-state-disabled; + regulator-off-in-suspend; }; }; @@ -161,8 +161,8 @@ regulator-always-on; regulator-boot-on; regulator-state-mem { - regulator-state-enabled; - regulator-state-uv = <1000000>; + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; }; }; }; diff --git a/dts/src/arm/rv1108.dtsi b/dts/src/arm/rv1108.dtsi index d31370ff28..f47ac86d28 100644 --- a/dts/src/arm/rv1108.dtsi +++ b/dts/src/arm/rv1108.dtsi @@ -207,6 +207,7 @@ clocks = <&cru SCLK_SPI>, <&cru PCLK_SPI>; clock-names = "spiclk", "apb_pclk"; dmas = <&pdma 8>, <&pdma 9>; + dma-names = "tx", "rx"; #dma-cells = <2>; #address-cells = <1>; #size-cells = <0>; @@ -833,6 +834,42 @@ }; }; + spim0 { + spim0_clk: spim0-clk { + rockchip,pins = <1 RK_PD0 RK_FUNC_2 &pcfg_pull_up>; + }; + + spim0_cs0: spim0-cs0 { + rockchip,pins = <1 RK_PD1 RK_FUNC_2 &pcfg_pull_up>; + }; + + spim0_tx: spim0-tx { + rockchip,pins = <1 RK_PD3 RK_FUNC_2 &pcfg_pull_up>; + }; + + spim0_rx: spim0-rx { + rockchip,pins = <1 RK_PD2 RK_FUNC_2 &pcfg_pull_up>; + }; + }; + + spim1 { + spim1_clk: spim1-clk { + rockchip,pins = <0 RK_PA3 RK_FUNC_1 &pcfg_pull_up>; + }; + + spim1_cs0: spim1-cs0 { + rockchip,pins = <0 RK_PA4 RK_FUNC_1 &pcfg_pull_up>; + }; + + spim1_rx: spim1-rx { + rockchip,pins = <0 RK_PB0 RK_FUNC_1 &pcfg_pull_up>; + }; + + spim1_tx: spim1-tx { + rockchip,pins = <0 RK_PA7 RK_FUNC_1 &pcfg_pull_up>; + }; + }; + tsadc { otp_out: otp-out { rockchip,pins = <0 RK_PB7 RK_FUNC_1 &pcfg_pull_none>; diff --git a/dts/src/arm/s3c2416-smdk2416.dts b/dts/src/arm/s3c2416-smdk2416.dts index 5164386aff..cb371bf72f 100644 --- a/dts/src/arm/s3c2416-smdk2416.dts +++ b/dts/src/arm/s3c2416-smdk2416.dts @@ -19,9 +19,12 @@ clocks { compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; - xti: xti { + xti: xti@0 { compatible = "fixed-clock"; + reg = <0>; clock-frequency = <12000000>; clock-output-names = "xti"; #clock-cells = <0>; diff --git a/dts/src/arm/s5pv210-aries.dtsi b/dts/src/arm/s5pv210-aries.dtsi index 575094ea70..8ff70b8563 100644 --- a/dts/src/arm/s5pv210-aries.dtsi +++ b/dts/src/arm/s5pv210-aries.dtsi @@ -23,6 +23,31 @@ 0x50000000 0x08000000>; }; + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + mfc_left: region@43000000 { + compatible = "shared-dma-pool"; + no-map; + reg = <0x43000000 0x2000000>; + }; + + mfc_right: region@51000000 { + compatible = "shared-dma-pool"; + no-map; + reg = <0x51000000 0x2000000>; + }; + }; + + vibrator_pwr: regulator-fixed-0 { + compatible = "regulator-fixed"; + regulator-name = "vibrator-en"; + enable-active-high; + gpio = <&gpj1 1 GPIO_ACTIVE_HIGH>; + }; + wifi_pwrseq: wifi-pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&gpg1 2 GPIO_ACTIVE_LOW>; @@ -296,6 +321,22 @@ reg = <0x36>; }; }; + + vibrator: pwm-vibrator { + compatible = "pwm-vibrator"; + pwms = <&pwm 1 44642 0>; + pwm-names = "enable"; + vcc-supply = <&vibrator_pwr>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm1_out>; + }; + + poweroff: syscon-poweroff { + compatible = "syscon-poweroff"; + regmap = <&pmu_syscon>; + offset = <0x681c>; /* PS_HOLD_CONTROL */ + value = <0x5200>; + }; }; &fimd { @@ -329,6 +370,27 @@ status = "okay"; }; +&i2c2 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <400000>; + samsung,i2c-slave-addr = <0x10>; + status = "okay"; + + touchscreen@4a { + compatible = "atmel,maxtouch"; + reg = <0x4a>; + interrupt-parent = <&gpj0>; + interrupts = <5 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&ts_irq>; + reset-gpios = <&gpj1 3 GPIO_ACTIVE_HIGH>; + }; +}; + +&mfc { + memory-region = <&mfc_left>, <&mfc_right>; +}; + &pinctrl0 { wlan_bt_en: wlan-bt-en { samsung,pins = "gpb-5"; @@ -350,6 +412,13 @@ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; }; + bt_host_wake: bt-host-wake { + samsung,pins = "gph2-5"; + samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; + samsung,pin-pud = <S3C64XX_PIN_PULL_DOWN>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + tf_detect: tf-detect { samsung,pins = "gph3-4"; samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; @@ -362,6 +431,17 @@ samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; + + ts_irq: ts-irq { + samsung,pins = "gpj0-5"; + samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; + samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; +}; + +&pwm { + samsung,pwm-outputs = <1>; }; &sdhci1 { @@ -399,6 +479,16 @@ &uart0 { status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + max-speed = <115200>; + pinctrl-names = "default"; + pinctrl-0 = <&uart0_data &uart0_fctl &bt_host_wake>; + shutdown-gpios = <&gpb 3 GPIO_ACTIVE_HIGH>; + device-wakeup-gpios = <&gpg3 4 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gph2 5 GPIO_ACTIVE_HIGH>; + }; }; &uart1 { diff --git a/dts/src/arm/s5pv210-fascinate4g.dts b/dts/src/arm/s5pv210-fascinate4g.dts index ccf761b1ba..07a8d9bbe5 100644 --- a/dts/src/arm/s5pv210-fascinate4g.dts +++ b/dts/src/arm/s5pv210-fascinate4g.dts @@ -11,13 +11,6 @@ chosen { stdout-path = &uart2; - /* - * It's hard to change those parameters in stock bootloader, - * since it requires special hardware/cable. - * Let's hardocde bootargs for now, till u-boot port is finished, - * with which it should be easier. - */ - bootargs = "root=/dev/mmcblk1p1 rw rootwait ignore_loglevel earlyprintk"; }; gpio-keys { diff --git a/dts/src/arm/s5pv210-galaxys.dts b/dts/src/arm/s5pv210-galaxys.dts index 8422767497..cf161bbfba 100644 --- a/dts/src/arm/s5pv210-galaxys.dts +++ b/dts/src/arm/s5pv210-galaxys.dts @@ -11,13 +11,6 @@ chosen { stdout-path = &uart2; - /* - * It's hard to change those parameters in stock bootloader, - * since it requires special hardware/cable. - * Let's hardocde bootargs for now, till u-boot port is finished, - * with which it should be easier. - */ - bootargs = "root=/dev/mmcblk2p1 rw rootwait ignore_loglevel earlyprintk"; }; nand_pwrseq: nand-pwrseq { diff --git a/dts/src/arm/s5pv210.dtsi b/dts/src/arm/s5pv210.dtsi index 12eac8930e..a44d5eb56b 100644 --- a/dts/src/arm/s5pv210.dtsi +++ b/dts/src/arm/s5pv210.dtsi @@ -25,6 +25,8 @@ aliases { csis0 = &csis0; + dmc0 = &dmc0; + dmc1 = &dmc1; fimc0 = &fimc0; fimc1 = &fimc1; fimc2 = &fimc2; @@ -78,7 +80,7 @@ }; }; - onenand: onenand@b0000000 { + onenand: onenand@b0600000 { compatible = "samsung,s5pv210-onenand"; reg = <0xb0600000 0x2000>, <0xb0000000 0x20000>, @@ -511,7 +513,7 @@ }; fimd: fimd@f8000000 { - compatible = "samsung,exynos4210-fimd"; + compatible = "samsung,s5pv210-fimd"; interrupt-parent = <&vic2>; reg = <0xf8000000 0x20000>; interrupt-names = "fifo", "vsync", "lcd_sys"; @@ -521,6 +523,16 @@ status = "disabled"; }; + dmc0: dmc@f0000000 { + compatible = "samsung,s5pv210-dmc"; + reg = <0xf0000000 0x1000>; + }; + + dmc1: dmc@f1400000 { + compatible = "samsung,s5pv210-dmc"; + reg = <0xf1400000 0x1000>; + }; + g2d: g2d@fa000000 { compatible = "samsung,s5pv210-g2d"; reg = <0xfa000000 0x1000>; @@ -542,6 +554,15 @@ #dma-requests = <1>; }; + rotator: rotator@fa300000 { + compatible = "samsung,s5pv210-rotator"; + reg = <0xfa300000 0x1000>; + interrupt-parent = <&vic2>; + interrupts = <4>; + clocks = <&clocks CLK_ROTATOR>; + clock-names = "rotator"; + }; + i2c1: i2c@fab00000 { compatible = "samsung,s3c2440-i2c"; reg = <0xfab00000 0x1000>; diff --git a/dts/src/arm/sama5d2.dtsi b/dts/src/arm/sama5d2.dtsi index dc2280d912..d159ee42ef 100644 --- a/dts/src/arm/sama5d2.dtsi +++ b/dts/src/arm/sama5d2.dtsi @@ -43,13 +43,14 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -#include "skeleton.dtsi" #include <dt-bindings/dma/at91.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/clock/at91.h> #include <dt-bindings/iio/adc/at91-sama5d2_adc.h> / { + #address-cells = <1>; + #size-cells = <1>; model = "Atmel SAMA5D2 family SoC"; compatible = "atmel,sama5d2"; interrupt-parent = <&aic>; @@ -113,6 +114,7 @@ }; memory { + device_type = "memory"; reg = <0x20000000 0x20000000>; }; diff --git a/dts/src/arm/sama5d3.dtsi b/dts/src/arm/sama5d3.dtsi index 1408fa4a62..02198772eb 100644 --- a/dts/src/arm/sama5d3.dtsi +++ b/dts/src/arm/sama5d3.dtsi @@ -8,7 +8,6 @@ * Licensed under GPLv2 or later. */ -#include "skeleton.dtsi" #include <dt-bindings/dma/at91.h> #include <dt-bindings/pinctrl/at91.h> #include <dt-bindings/interrupt-controller/irq.h> @@ -16,6 +15,8 @@ #include <dt-bindings/clock/at91.h> / { + #address-cells = <1>; + #size-cells = <1>; model = "Atmel SAMA5D3 family SoC"; compatible = "atmel,sama5d3", "atmel,sama5"; interrupt-parent = <&aic>; @@ -56,6 +57,7 @@ }; memory { + device_type = "memory"; reg = <0x20000000 0x8000000>; }; diff --git a/dts/src/arm/sama5d4.dtsi b/dts/src/arm/sama5d4.dtsi index 2604fd07dd..6c1e41f945 100644 --- a/dts/src/arm/sama5d4.dtsi +++ b/dts/src/arm/sama5d4.dtsi @@ -43,7 +43,6 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -#include "skeleton.dtsi" #include <dt-bindings/clock/at91.h> #include <dt-bindings/dma/at91.h> #include <dt-bindings/pinctrl/at91.h> @@ -51,6 +50,8 @@ #include <dt-bindings/gpio/gpio.h> / { + #address-cells = <1>; + #size-cells = <1>; model = "Atmel SAMA5D4 family SoC"; compatible = "atmel,sama5d4"; interrupt-parent = <&aic>; @@ -90,6 +91,7 @@ }; memory { + device_type = "memory"; reg = <0x20000000 0x20000000>; }; diff --git a/dts/src/arm/skeleton.dtsi b/dts/src/arm/skeleton.dtsi deleted file mode 100644 index 34eda68d9e..0000000000 --- a/dts/src/arm/skeleton.dtsi +++ /dev/null @@ -1,18 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * This file is deprecated, and will be removed once existing users have been - * updated. New dts{,i} files should *not* include skeleton.dtsi, and should - * instead explicitly provide the below nodes only as required. - * - * Skeleton device tree; the bare minimum needed to boot; just include and - * add a compatible value. The bootloader will typically populate the memory - * node. - */ - -/ { - #address-cells = <1>; - #size-cells = <1>; - chosen { }; - aliases { }; - memory { device_type = "memory"; reg = <0 0>; }; -}; diff --git a/dts/src/arm/skeleton64.dtsi b/dts/src/arm/skeleton64.dtsi deleted file mode 100644 index 54e637752b..0000000000 --- a/dts/src/arm/skeleton64.dtsi +++ /dev/null @@ -1,14 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Skeleton device tree in the 64 bits version; the bare minimum - * needed to boot; just include and add a compatible value. The - * bootloader will typically populate the memory node. - */ - -/ { - #address-cells = <2>; - #size-cells = <2>; - chosen { }; - aliases { }; - memory { device_type = "memory"; reg = <0 0 0 0>; }; -}; diff --git a/dts/src/arm/socfpga.dtsi b/dts/src/arm/socfpga.dtsi index dcb8fba3d7..ec1966480f 100644 --- a/dts/src/arm/socfpga.dtsi +++ b/dts/src/arm/socfpga.dtsi @@ -84,6 +84,7 @@ #dma-requests = <32>; clocks = <&l4_main_clk>; clock-names = "apb_pclk"; + resets = <&rst DMA_RESET>; }; }; @@ -100,6 +101,7 @@ reg = <0xffc00000 0x1000>; interrupts = <0 131 4>, <0 132 4>, <0 133 4>, <0 134 4>; clocks = <&can0_clk>; + resets = <&rst CAN0_RESET>; status = "disabled"; }; @@ -108,6 +110,7 @@ reg = <0xffc01000 0x1000>; interrupts = <0 135 4>, <0 136 4>, <0 137 4>, <0 138 4>; clocks = <&can1_clk>; + resets = <&rst CAN1_RESET>; status = "disabled"; }; @@ -585,6 +588,7 @@ compatible = "snps,dw-apb-gpio"; reg = <0xff708000 0x1000>; clocks = <&l4_mp_clk>; + resets = <&rst GPIO0_RESET>; status = "disabled"; porta: gpio-controller@0 { @@ -605,6 +609,7 @@ compatible = "snps,dw-apb-gpio"; reg = <0xff709000 0x1000>; clocks = <&l4_mp_clk>; + resets = <&rst GPIO1_RESET>; status = "disabled"; portb: gpio-controller@0 { @@ -625,6 +630,7 @@ compatible = "snps,dw-apb-gpio"; reg = <0xff70a000 0x1000>; clocks = <&l4_mp_clk>; + resets = <&rst GPIO2_RESET>; status = "disabled"; portc: gpio-controller@0 { @@ -735,6 +741,7 @@ #size-cells = <0>; clocks = <&l4_mp_clk>, <&sdmmc_clk_divided>; clock-names = "biu", "ciu"; + resets = <&rst SDMMC_RESET>; status = "disabled"; }; @@ -748,6 +755,7 @@ interrupts = <0x0 0x90 0x4>; clocks = <&nand_clk>, <&nand_x_clk>, <&nand_ecc_clk>; clock-names = "nand", "nand_x", "ecc"; + resets = <&rst NAND_RESET>; status = "disabled"; }; @@ -767,6 +775,7 @@ cdns,fifo-width = <4>; cdns,trigger-address = <0x00000000>; clocks = <&qspi_clk>; + resets = <&rst QSPI_RESET>; status = "disabled"; }; @@ -785,6 +794,7 @@ sdr: sdr@ffc25000 { compatible = "altr,sdr-ctl", "syscon"; reg = <0xffc25000 0x1000>; + resets = <&rst SDR_RESET>; }; sdramedac { @@ -801,6 +811,7 @@ interrupts = <0 154 4>; num-cs = <4>; clocks = <&spi_m_clk>; + resets = <&rst SPIM0_RESET>; status = "disabled"; }; @@ -812,6 +823,7 @@ interrupts = <0 155 4>; num-cs = <4>; clocks = <&spi_m_clk>; + resets = <&rst SPIM1_RESET>; status = "disabled"; }; @@ -878,6 +890,7 @@ dmas = <&pdma 28>, <&pdma 29>; dma-names = "tx", "rx"; + resets = <&rst UART0_RESET>; }; uart1: serial1@ffc03000 { @@ -890,6 +903,7 @@ dmas = <&pdma 30>, <&pdma 31>; dma-names = "tx", "rx"; + resets = <&rst UART1_RESET>; }; usbphy0: usbphy { @@ -929,6 +943,7 @@ reg = <0xffd02000 0x1000>; interrupts = <0 171 4>; clocks = <&osc1>; + resets = <&rst L4WD0_RESET>; status = "disabled"; }; @@ -937,6 +952,7 @@ reg = <0xffd03000 0x1000>; interrupts = <0 172 4>; clocks = <&osc1>; + resets = <&rst L4WD1_RESET>; status = "disabled"; }; }; diff --git a/dts/src/arm/socfpga_arria10.dtsi b/dts/src/arm/socfpga_arria10.dtsi index e41fa23481..ae24599d58 100644 --- a/dts/src/arm/socfpga_arria10.dtsi +++ b/dts/src/arm/socfpga_arria10.dtsi @@ -470,6 +470,7 @@ tx-fifo-depth = <4096>; rx-fifo-depth = <16384>; clocks = <&l4_mp_clk>; + resets = <&rst EMAC2_RESET>; clock-names = "stmmaceth"; snps,axi-config = <&socfpga_axi_setup>; status = "disabled"; @@ -480,6 +481,7 @@ #size-cells = <0>; compatible = "snps,dw-apb-gpio"; reg = <0xffc02900 0x100>; + resets = <&rst GPIO0_RESET>; status = "disabled"; porta: gpio-controller@0 { @@ -499,6 +501,7 @@ #size-cells = <0>; compatible = "snps,dw-apb-gpio"; reg = <0xffc02a00 0x100>; + resets = <&rst GPIO1_RESET>; status = "disabled"; portb: gpio-controller@0 { @@ -518,6 +521,7 @@ #size-cells = <0>; compatible = "snps,dw-apb-gpio"; reg = <0xffc02b00 0x100>; + resets = <&rst GPIO2_RESET>; status = "disabled"; portc: gpio-controller@0 { @@ -548,6 +552,7 @@ reg = <0xffc02200 0x100>; interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>; clocks = <&l4_sp_clk>; + resets = <&rst I2C0_RESET>; status = "disabled"; }; @@ -558,6 +563,7 @@ reg = <0xffc02300 0x100>; interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>; clocks = <&l4_sp_clk>; + resets = <&rst I2C1_RESET>; status = "disabled"; }; @@ -568,6 +574,7 @@ reg = <0xffc02400 0x100>; interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>; clocks = <&l4_sp_clk>; + resets = <&rst I2C2_RESET>; status = "disabled"; }; @@ -578,6 +585,7 @@ reg = <0xffc02500 0x100>; interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>; clocks = <&l4_sp_clk>; + resets = <&rst I2C3_RESET>; status = "disabled"; }; @@ -588,6 +596,7 @@ reg = <0xffc02600 0x100>; interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH>; clocks = <&l4_sp_clk>; + resets = <&rst I2C4_RESET>; status = "disabled"; }; @@ -600,6 +609,7 @@ num-cs = <4>; /*32bit_access;*/ clocks = <&spi_m_clk>; + resets = <&rst SPIM0_RESET>; status = "disabled"; }; @@ -614,6 +624,7 @@ tx-dma-channel = <&pdma 16>; rx-dma-channel = <&pdma 17>; clocks = <&spi_m_clk>; + resets = <&rst SPIM1_RESET>; status = "disabled"; }; @@ -642,6 +653,7 @@ fifo-depth = <0x400>; clocks = <&l4_mp_clk>, <&sdmmc_clk>; clock-names = "biu", "ciu"; + resets = <&rst SDMMC_RESET>; status = "disabled"; }; @@ -655,6 +667,7 @@ interrupts = <0 99 4>; clocks = <&nand_clk>, <&nand_x_clk>, <&nand_ecc_clk>; clock-names = "nand", "nand_x", "ecc"; + resets = <&rst NAND_RESET>; status = "disabled"; }; @@ -739,6 +752,7 @@ cdns,fifo-width = <4>; cdns,trigger-address = <0x00000000>; clocks = <&qspi_clk>; + resets = <&rst QSPI_RESET>; status = "disabled"; }; @@ -815,6 +829,7 @@ reg-shift = <2>; reg-io-width = <4>; clocks = <&l4_sp_clk>; + resets = <&rst UART0_RESET>; status = "disabled"; }; @@ -825,6 +840,7 @@ reg-shift = <2>; reg-io-width = <4>; clocks = <&l4_sp_clk>; + resets = <&rst UART1_RESET>; status = "disabled"; }; @@ -865,6 +881,7 @@ reg = <0xffd00200 0x100>; interrupts = <0 119 IRQ_TYPE_LEVEL_HIGH>; clocks = <&l4_sys_free_clk>; + resets = <&rst L4WD0_RESET>; status = "disabled"; }; @@ -873,6 +890,7 @@ reg = <0xffd00300 0x100>; interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>; clocks = <&l4_sys_free_clk>; + resets = <&rst L4WD1_RESET>; status = "disabled"; }; }; diff --git a/dts/src/arm/socfpga_cyclone5_chameleon96.dts b/dts/src/arm/socfpga_cyclone5_chameleon96.dts new file mode 100644 index 0000000000..f6561766d8 --- /dev/null +++ b/dts/src/arm/socfpga_cyclone5_chameleon96.dts @@ -0,0 +1,130 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Device Tree file for the Chameleon96 + * + * Copyright (c) 2018 Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + */ + +#include <dt-bindings/gpio/gpio.h> + +#include "socfpga_cyclone5.dtsi" + +/ { + model = "Novetech Chameleon96"; + compatible = "novtech,chameleon96", "altr,socfpga-cyclone5", "altr,socfpga"; + + chosen { + bootargs = "earlyprintk"; + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + name = "memory"; + device_type = "memory"; + reg = <0x0 0x20000000>; /* 512MB */ + }; + + regulator_3_3v: 3-3-v-regulator { + compatible = "regulator-fixed"; + regulator-name = "3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + leds { + compatible = "gpio-leds"; + + user_led1 { + label = "green:user1"; + gpios = <&porta 14 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + }; + + user_led2 { + label = "green:user2"; + gpios = <&porta 22 GPIO_ACTIVE_LOW>; + linux,default-trigger = "mmc0"; + }; + + user_led3 { + label = "green:user3"; + gpios = <&porta 25 GPIO_ACTIVE_LOW>; + linux,default-trigger = "none"; + }; + + user_led4 { + label = "green:user4"; + gpios = <&portb 3 GPIO_ACTIVE_LOW>; + panic-indicator; + linux,default-trigger = "none"; + }; + }; +}; + +&gpio0 { + status = "okay"; +}; + +&gpio1 { + status = "okay"; +}; + +&i2c0 { + /* On Low speed expansion */ + label = "LS-I2C0"; + status = "okay"; +}; + +&i2c1 { + /* On Low speed expansion */ + label = "LS-I2C1"; + status = "okay"; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c3 { + /* On High speed expansion */ + label = "HS-I2C2"; + status = "okay"; +}; + +&mmc0 { + vmmc-supply = <®ulator_3_3v>; + vqmmc-supply = <®ulator_3_3v>; + status = "okay"; +}; + +&spi0 { + /* On High speed expansion */ + label = "HS-SPI1"; + status = "okay"; +}; + +&spi1 { + /* On Low speed expansion */ + label = "LS-SPI0"; + status = "okay"; +}; + +&uart0 { + /* On Low speed expansion */ + label = "LS-UART1"; + status = "okay"; +}; + +&uart1 { + /* On Low speed expansion */ + label = "LS-UART0"; + status = "okay"; +}; + +&usbphy0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; diff --git a/dts/src/arm/spear13xx.dtsi b/dts/src/arm/spear13xx.dtsi index 086b4b3332..390df643a1 100644 --- a/dts/src/arm/spear13xx.dtsi +++ b/dts/src/arm/spear13xx.dtsi @@ -11,9 +11,9 @@ * http://www.gnu.org/copyleft/gpl.html */ -/include/ "skeleton.dtsi" - / { + #address-cells = <1>; + #size-cells = <1>; interrupt-parent = <&gic>; cpus { diff --git a/dts/src/arm/spear3xx.dtsi b/dts/src/arm/spear3xx.dtsi index 118135d758..c47380763c 100644 --- a/dts/src/arm/spear3xx.dtsi +++ b/dts/src/arm/spear3xx.dtsi @@ -11,9 +11,9 @@ * http://www.gnu.org/copyleft/gpl.html */ -/include/ "skeleton.dtsi" - / { + #address-cells = <1>; + #size-cells = <1>; interrupt-parent = <&vic>; cpus { diff --git a/dts/src/arm/spear600.dtsi b/dts/src/arm/spear600.dtsi index 00166eb9be..0a634fb074 100644 --- a/dts/src/arm/spear600.dtsi +++ b/dts/src/arm/spear600.dtsi @@ -9,9 +9,9 @@ * http://www.gnu.org/copyleft/gpl.html */ -/include/ "skeleton.dtsi" - / { + #address-cells = <1>; + #size-cells = <1>; compatible = "st,spear600"; cpus { diff --git a/dts/src/arm/ste-nomadik-nhk15.dts b/dts/src/arm/ste-nomadik-nhk15.dts index 12afdc7467..f2f6558a00 100644 --- a/dts/src/arm/ste-nomadik-nhk15.dts +++ b/dts/src/arm/ste-nomadik-nhk15.dts @@ -1,7 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree for the ST-Ericsson Nomadik S8815 board - * Produced by Calao Systems + * Device Tree for the ST Microelectronics Nomadik NHK8815 board */ /dts-v1/; @@ -182,43 +181,12 @@ pinctrl-names = "default"; pinctrl-0 = <&clcd_24bit_mux>; port { - nomadik_clcd_pads: endpoint { + nomadik_clcd: endpoint { remote-endpoint = <&nomadik_clcd_panel>; arm,pl11x,tft-r0g0b0-pads = <16 8 0>; }; }; - /* - * WVGA connector 21 - * WVGA (800x480): 4.3" TPG110 TDO43MTEA2 24-bit RGB - * with TPO touch screen. - */ - panel { - compatible = "tpo,tpg110", "panel-dpi"; - grestb-gpios = <&stmpe_gpio44 5 GPIO_ACTIVE_LOW>; - scen-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; - scl-gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>; - sda-gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>; - backlight = <&bl>; - - port { - nomadik_clcd_panel: endpoint { - remote-endpoint = <&nomadik_clcd_pads>; - }; - }; - - panel-timing { - clock-frequency = <33200000>; - hactive = <800>; - hback-porch = <216>; - hfront-porch = <40>; - hsync-len = <1>; - vactive = <480>; - vback-porch = <35>; - vfront-porch = <10>; - vsync-len = <1>; - }; - }; }; /* Activate RX/TX and CTS/RTS on UART 0 */ @@ -233,6 +201,56 @@ }; }; + spi { + compatible = "spi-gpio"; + #address-cells = <1>; + #size-cells = <0>; + + /* + * As we're dealing with 3wire SPI, we only define SCK + * and MOSI (in the spec MOSI is called "SDA"). + */ + gpio-sck = <&gpio0 5 GPIO_ACTIVE_HIGH>; + gpio-mosi = <&gpio0 4 GPIO_ACTIVE_HIGH>; + /* + * This chipselect is active high. Just setting the flags + * to GPIO_ACTIVE_HIGH is not enough for the SPI DT bindings, + * it will be ignored, only the special "spi-cs-high" flag + * really counts. + */ + cs-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; + spi-cs-high; + num-chipselects = <1>; + + /* + * WVGA connector 21 + * WVGA (800x480): 4.3" TPG110 TDO43MTEA2 24-bit RGB + * with TPO touch screen. + */ + panel: display@0 { + /* + * The TPO display driver is connected to a + * 5.7" OSD OSD057VA01CT TFT display. + */ + compatible = "tpo,tpg110"; + reg = <0>; + spi-3wire; + /* 320 ns min period ~= 3 MHz */ + spi-max-frequency = <3000000>; + /* Width and height from the OSD data sheet */ + width-mm = <116>; + height-mm = <87>; + grestb-gpios = <&stmpe_gpio44 5 GPIO_ACTIVE_LOW>; + backlight = <&bl>; + + port { + nomadik_clcd_panel: endpoint { + remote-endpoint = <&nomadik_clcd>; + }; + }; + }; + }; + bl: backlight { compatible = "pwm-backlight"; pwms = <&stmpe0_pwm 0 500000>; diff --git a/dts/src/arm/ste-nomadik-stn8815.dtsi b/dts/src/arm/ste-nomadik-stn8815.dtsi index fca76a696d..f78b4eabd6 100644 --- a/dts/src/arm/ste-nomadik-stn8815.dtsi +++ b/dts/src/arm/ste-nomadik-stn8815.dtsi @@ -4,13 +4,13 @@ */ #include <dt-bindings/gpio/gpio.h> -#include "skeleton.dtsi" / { #address-cells = <1>; #size-cells = <1>; memory { + device_type = "memory"; reg = <0x00000000 0x04000000>, <0x08000000 0x04000000>; }; diff --git a/dts/src/arm/ste-u300.dts b/dts/src/arm/ste-u300.dts index 1bd1aba332..f4e7660fea 100644 --- a/dts/src/arm/ste-u300.dts +++ b/dts/src/arm/ste-u300.dts @@ -4,7 +4,6 @@ */ /dts-v1/; -/include/ "skeleton.dtsi" / { model = "ST-Ericsson U300"; @@ -22,6 +21,7 @@ }; memory { + device_type = "memory"; reg = <0x48000000 0x03c00000>; }; diff --git a/dts/src/arm/stm32429i-eval.dts b/dts/src/arm/stm32429i-eval.dts index ed7d7f4646..73ea84df7b 100644 --- a/dts/src/arm/stm32429i-eval.dts +++ b/dts/src/arm/stm32429i-eval.dts @@ -61,6 +61,7 @@ }; memory { + device_type = "memory"; reg = <0x00000000 0x2000000>; }; diff --git a/dts/src/arm/stm32746g-eval.dts b/dts/src/arm/stm32746g-eval.dts index 8c081eaf20..d90b0d1e18 100644 --- a/dts/src/arm/stm32746g-eval.dts +++ b/dts/src/arm/stm32746g-eval.dts @@ -55,6 +55,7 @@ }; memory { + device_type = "memory"; reg = <0xc0000000 0x2000000>; }; diff --git a/dts/src/arm/stm32f429-disco.dts b/dts/src/arm/stm32f429-disco.dts index 5ceb2cf377..e19d0fe7db 100644 --- a/dts/src/arm/stm32f429-disco.dts +++ b/dts/src/arm/stm32f429-disco.dts @@ -60,6 +60,7 @@ }; memory { + device_type = "memory"; reg = <0x90000000 0x800000>; }; diff --git a/dts/src/arm/stm32f429.dtsi b/dts/src/arm/stm32f429.dtsi index 8d6f028ae2..588b6ef94e 100644 --- a/dts/src/arm/stm32f429.dtsi +++ b/dts/src/arm/stm32f429.dtsi @@ -45,12 +45,14 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -#include "skeleton.dtsi" #include "armv7-m.dtsi" #include <dt-bindings/clock/stm32fx-clock.h> #include <dt-bindings/mfd/stm32f4-rcc.h> / { + #address-cells = <1>; + #size-cells = <1>; + clocks { clk_hse: clk-hse { #clock-cells = <0>; @@ -314,6 +316,26 @@ status = "disabled"; }; + spi2: spi@40003800 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32f4-spi"; + reg = <0x40003800 0x400>; + interrupts = <36>; + clocks = <&rcc 0 STM32F4_APB1_CLOCK(SPI2)>; + status = "disabled"; + }; + + spi3: spi@40003c00 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32f4-spi"; + reg = <0x40003c00 0x400>; + interrupts = <51>; + clocks = <&rcc 0 STM32F4_APB1_CLOCK(SPI3)>; + status = "disabled"; + }; + usart2: serial@40004400 { compatible = "st,stm32-uart"; reg = <0x40004400 0x400>; @@ -523,6 +545,26 @@ status = "disabled"; }; + spi1: spi@40013000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32f4-spi"; + reg = <0x40013000 0x400>; + interrupts = <35>; + clocks = <&rcc 0 STM32F4_APB2_CLOCK(SPI1)>; + status = "disabled"; + }; + + spi4: spi@40013400 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32f4-spi"; + reg = <0x40013400 0x400>; + interrupts = <84>; + clocks = <&rcc 0 STM32F4_APB2_CLOCK(SPI4)>; + status = "disabled"; + }; + syscfg: system-config@40013800 { compatible = "syscon"; reg = <0x40013800 0x400>; @@ -587,6 +629,26 @@ }; }; + spi5: spi@40015000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32f4-spi"; + reg = <0x40015000 0x400>; + interrupts = <85>; + clocks = <&rcc 0 STM32F4_APB2_CLOCK(SPI5)>; + status = "disabled"; + }; + + spi6: spi@40015400 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32f4-spi"; + reg = <0x40015400 0x400>; + interrupts = <86>; + clocks = <&rcc 0 STM32F4_APB2_CLOCK(SPI6)>; + status = "disabled"; + }; + pwrcfg: power-config@40007000 { compatible = "syscon"; reg = <0x40007000 0x400>; diff --git a/dts/src/arm/stm32f469-disco.dts b/dts/src/arm/stm32f469-disco.dts index 7937b43d77..a3ff04940a 100644 --- a/dts/src/arm/stm32f469-disco.dts +++ b/dts/src/arm/stm32f469-disco.dts @@ -61,6 +61,7 @@ }; memory { + device_type = "memory"; reg = <0x00000000 0x1000000>; }; diff --git a/dts/src/arm/stm32f746-disco.dts b/dts/src/arm/stm32f746-disco.dts index e3a7bd338d..0ba9c5b08a 100644 --- a/dts/src/arm/stm32f746-disco.dts +++ b/dts/src/arm/stm32f746-disco.dts @@ -56,6 +56,7 @@ }; memory { + device_type = "memory"; reg = <0xC0000000 0x800000>; }; diff --git a/dts/src/arm/stm32f746.dtsi b/dts/src/arm/stm32f746.dtsi index f48d06a80d..a25b7000a3 100644 --- a/dts/src/arm/stm32f746.dtsi +++ b/dts/src/arm/stm32f746.dtsi @@ -40,12 +40,14 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -#include "skeleton.dtsi" #include "armv7-m.dtsi" #include <dt-bindings/clock/stm32fx-clock.h> #include <dt-bindings/mfd/stm32f7-rcc.h> / { + #address-cells = <1>; + #size-cells = <1>; + clocks { clk_hse: clk-hse { #clock-cells = <0>; diff --git a/dts/src/arm/stm32f769-disco.dts b/dts/src/arm/stm32f769-disco.dts index 483d896e2b..3c7216844a 100644 --- a/dts/src/arm/stm32f769-disco.dts +++ b/dts/src/arm/stm32f769-disco.dts @@ -56,6 +56,7 @@ }; memory { + device_type = "memory"; reg = <0xC0000000 0x1000000>; }; diff --git a/dts/src/arm/stm32h743-pinctrl.dtsi b/dts/src/arm/stm32h743-pinctrl.dtsi index 24be8e63de..980b2769ca 100644 --- a/dts/src/arm/stm32h743-pinctrl.dtsi +++ b/dts/src/arm/stm32h743-pinctrl.dtsi @@ -173,6 +173,21 @@ }; }; + ethernet_rmii: rmii@0 { + pins { + pinmux = <STM32_PINMUX('G', 11, AF11)>, + <STM32_PINMUX('G', 13, AF11)>, + <STM32_PINMUX('G', 12, AF11)>, + <STM32_PINMUX('C', 4, AF11)>, + <STM32_PINMUX('C', 5, AF11)>, + <STM32_PINMUX('A', 7, AF11)>, + <STM32_PINMUX('C', 1, AF11)>, + <STM32_PINMUX('A', 2, AF11)>, + <STM32_PINMUX('A', 1, AF11)>; + slew-rate = <2>; + }; + }; + usart1_pins: usart1@0 { pins1 { pinmux = <STM32_PINMUX('B', 14, AF4)>; /* USART1_TX */ diff --git a/dts/src/arm/stm32h743.dtsi b/dts/src/arm/stm32h743.dtsi index cbdd69ca9e..5cac79ebeb 100644 --- a/dts/src/arm/stm32h743.dtsi +++ b/dts/src/arm/stm32h743.dtsi @@ -40,13 +40,15 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -#include "skeleton.dtsi" #include "armv7-m.dtsi" #include <dt-bindings/clock/stm32h7-clks.h> #include <dt-bindings/mfd/stm32h7-rcc.h> #include <dt-bindings/interrupt-controller/irq.h> / { + #address-cells = <1>; + #size-cells = <1>; + clocks { clk_hse: clk-hse { #clock-cells = <0>; @@ -511,6 +513,19 @@ status = "disabled"; }; }; + + mac: ethernet@40028000 { + compatible = "st,stm32-dwmac", "snps,dwmac-4.10a"; + reg = <0x40028000 0x8000>; + reg-names = "stmmaceth"; + interrupts = <61>; + interrupt-names = "macirq"; + clock-names = "stmmaceth", "mac-clk-tx", "mac-clk-rx"; + clocks = <&rcc ETH1MAC_CK>, <&rcc ETH1TX_CK>, <&rcc ETH1RX_CK>; + st,syscon = <&syscfg 0x4>; + snps,pbl = <8>; + status = "disabled"; + }; }; }; diff --git a/dts/src/arm/stm32h743i-disco.dts b/dts/src/arm/stm32h743i-disco.dts index 45e088c557..dd06c8f3d0 100644 --- a/dts/src/arm/stm32h743i-disco.dts +++ b/dts/src/arm/stm32h743i-disco.dts @@ -54,6 +54,7 @@ }; memory { + device_type = "memory"; reg = <0xd0000000 0x2000000>; }; @@ -66,6 +67,23 @@ clock-frequency = <25000000>; }; +&mac { + status = "disabled"; + pinctrl-0 = <ðernet_rmii>; + pinctrl-names = "default"; + phy-mode = "rmii"; + phy-handle = <&phy0>; + + mdio0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + phy0: ethernet-phy@0 { + reg = <0>; + }; + }; +}; + &usart2 { pinctrl-0 = <&usart2_pins>; pinctrl-names = "default"; diff --git a/dts/src/arm/stm32h743i-eval.dts b/dts/src/arm/stm32h743i-eval.dts index 3f8e0c4a99..ebc3f0933f 100644 --- a/dts/src/arm/stm32h743i-eval.dts +++ b/dts/src/arm/stm32h743i-eval.dts @@ -54,6 +54,7 @@ }; memory { + device_type = "memory"; reg = <0xd0000000 0x2000000>; }; @@ -104,6 +105,23 @@ status = "okay"; }; +&mac { + status = "disabled"; + pinctrl-0 = <ðernet_rmii>; + pinctrl-names = "default"; + phy-mode = "rmii"; + phy-handle = <&phy0>; + + mdio0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + phy0: ethernet-phy@0 { + reg = <0>; + }; + }; +}; + &usart1 { pinctrl-0 = <&usart1_pins>; pinctrl-names = "default"; diff --git a/dts/src/arm/stm32mp157-pinctrl.dtsi b/dts/src/arm/stm32mp157-pinctrl.dtsi index c4851271e8..9ec4694e93 100644 --- a/dts/src/arm/stm32mp157-pinctrl.dtsi +++ b/dts/src/arm/stm32mp157-pinctrl.dtsi @@ -246,6 +246,13 @@ }; }; + m_can1_sleep_pins_a: m_can1-sleep@0 { + pins { + pinmux = <STM32_PINMUX('H', 13, ANALOG)>, /* CAN1_TX */ + <STM32_PINMUX('I', 9, ANALOG)>; /* CAN1_RX */ + }; + }; + pwm2_pins_a: pwm2-0 { pins { pinmux = <STM32_PINMUX('A', 3, AF1)>; /* TIM2_CH4 */ diff --git a/dts/src/arm/stm32mp157c-ed1.dts b/dts/src/arm/stm32mp157c-ed1.dts index f77bea49c0..d66edb0c66 100644 --- a/dts/src/arm/stm32mp157c-ed1.dts +++ b/dts/src/arm/stm32mp157c-ed1.dts @@ -17,6 +17,7 @@ }; memory@c0000000 { + device_type = "memory"; reg = <0xC0000000 0x40000000>; }; @@ -49,6 +50,10 @@ }; }; +&dts { + status = "okay"; +}; + &i2c4 { pinctrl-names = "default"; pinctrl-0 = <&i2c4_pins_a>; @@ -72,6 +77,9 @@ &timers6 { status = "okay"; + /* spare dmas for other usage */ + /delete-property/dmas; + /delete-property/dma-names; timer@5 { status = "okay"; }; diff --git a/dts/src/arm/stm32mp157c-ev1.dts b/dts/src/arm/stm32mp157c-ev1.dts index 063ee8ac5d..b6aca40b9b 100644 --- a/dts/src/arm/stm32mp157c-ev1.dts +++ b/dts/src/arm/stm32mp157c-ev1.dts @@ -124,8 +124,9 @@ }; &m_can1 { - pinctrl-names = "default"; + pinctrl-names = "default", "sleep"; pinctrl-0 = <&m_can1_pins_a>; + pinctrl-1 = <&m_can1_sleep_pins_a>; status = "okay"; }; @@ -161,6 +162,9 @@ }; &timers2 { + /* spare dmas for other usage (un-delete to enable pwm capture) */ + /delete-property/dmas; + /delete-property/dma-names; status = "disabled"; pwm { pinctrl-0 = <&pwm2_pins_a>; @@ -173,6 +177,8 @@ }; &timers8 { + /delete-property/dmas; + /delete-property/dma-names; status = "disabled"; pwm { pinctrl-0 = <&pwm8_pins_a>; @@ -185,6 +191,8 @@ }; &timers12 { + /delete-property/dmas; + /delete-property/dma-names; status = "disabled"; pwm { pinctrl-0 = <&pwm12_pins_a>; diff --git a/dts/src/arm/stm32mp157c.dtsi b/dts/src/arm/stm32mp157c.dtsi index 8bf1c17f8c..f8bbfff595 100644 --- a/dts/src/arm/stm32mp157c.dtsi +++ b/dts/src/arm/stm32mp157c.dtsi @@ -84,6 +84,31 @@ }; }; + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&dts>; + + trips { + cpu_alert1: cpu-alert1 { + temperature = <85000>; + hysteresis = <0>; + type = "passive"; + }; + + cpu-crit { + temperature = <120000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + }; + }; + }; + soc { compatible = "simple-bus"; #address-cells = <1>; @@ -98,6 +123,12 @@ reg = <0x40000000 0x400>; clocks = <&rcc TIM2_K>; clock-names = "int"; + dmas = <&dmamux1 18 0x400 0x1>, + <&dmamux1 19 0x400 0x1>, + <&dmamux1 20 0x400 0x1>, + <&dmamux1 21 0x400 0x1>, + <&dmamux1 22 0x400 0x1>; + dma-names = "ch1", "ch2", "ch3", "ch4", "up"; status = "disabled"; pwm { @@ -119,6 +150,13 @@ reg = <0x40001000 0x400>; clocks = <&rcc TIM3_K>; clock-names = "int"; + dmas = <&dmamux1 23 0x400 0x1>, + <&dmamux1 24 0x400 0x1>, + <&dmamux1 25 0x400 0x1>, + <&dmamux1 26 0x400 0x1>, + <&dmamux1 27 0x400 0x1>, + <&dmamux1 28 0x400 0x1>; + dma-names = "ch1", "ch2", "ch3", "ch4", "up", "trig"; status = "disabled"; pwm { @@ -140,6 +178,11 @@ reg = <0x40002000 0x400>; clocks = <&rcc TIM4_K>; clock-names = "int"; + dmas = <&dmamux1 29 0x400 0x1>, + <&dmamux1 30 0x400 0x1>, + <&dmamux1 31 0x400 0x1>, + <&dmamux1 32 0x400 0x1>; + dma-names = "ch1", "ch2", "ch3", "ch4"; status = "disabled"; pwm { @@ -161,6 +204,13 @@ reg = <0x40003000 0x400>; clocks = <&rcc TIM5_K>; clock-names = "int"; + dmas = <&dmamux1 55 0x400 0x1>, + <&dmamux1 56 0x400 0x1>, + <&dmamux1 57 0x400 0x1>, + <&dmamux1 58 0x400 0x1>, + <&dmamux1 59 0x400 0x1>, + <&dmamux1 60 0x400 0x1>; + dma-names = "ch1", "ch2", "ch3", "ch4", "up", "trig"; status = "disabled"; pwm { @@ -182,6 +232,8 @@ reg = <0x40004000 0x400>; clocks = <&rcc TIM6_K>; clock-names = "int"; + dmas = <&dmamux1 69 0x400 0x1>; + dma-names = "up"; status = "disabled"; timer@5 { @@ -198,6 +250,8 @@ reg = <0x40005000 0x400>; clocks = <&rcc TIM7_K>; clock-names = "int"; + dmas = <&dmamux1 70 0x400 0x1>; + dma-names = "up"; status = "disabled"; timer@6 { @@ -465,6 +519,15 @@ reg = <0x44000000 0x400>; clocks = <&rcc TIM1_K>; clock-names = "int"; + dmas = <&dmamux1 11 0x400 0x1>, + <&dmamux1 12 0x400 0x1>, + <&dmamux1 13 0x400 0x1>, + <&dmamux1 14 0x400 0x1>, + <&dmamux1 15 0x400 0x1>, + <&dmamux1 16 0x400 0x1>, + <&dmamux1 17 0x400 0x1>; + dma-names = "ch1", "ch2", "ch3", "ch4", + "up", "trig", "com"; status = "disabled"; pwm { @@ -486,6 +549,15 @@ reg = <0x44001000 0x400>; clocks = <&rcc TIM8_K>; clock-names = "int"; + dmas = <&dmamux1 47 0x400 0x1>, + <&dmamux1 48 0x400 0x1>, + <&dmamux1 49 0x400 0x1>, + <&dmamux1 50 0x400 0x1>, + <&dmamux1 51 0x400 0x1>, + <&dmamux1 52 0x400 0x1>, + <&dmamux1 53 0x400 0x1>; + dma-names = "ch1", "ch2", "ch3", "ch4", + "up", "trig", "com"; status = "disabled"; pwm { @@ -543,6 +615,11 @@ reg = <0x44006000 0x400>; clocks = <&rcc TIM15_K>; clock-names = "int"; + dmas = <&dmamux1 105 0x400 0x1>, + <&dmamux1 106 0x400 0x1>, + <&dmamux1 107 0x400 0x1>, + <&dmamux1 108 0x400 0x1>; + dma-names = "ch1", "up", "trig", "com"; status = "disabled"; pwm { @@ -564,6 +641,9 @@ reg = <0x44007000 0x400>; clocks = <&rcc TIM16_K>; clock-names = "int"; + dmas = <&dmamux1 109 0x400 0x1>, + <&dmamux1 110 0x400 0x1>; + dma-names = "ch1", "up"; status = "disabled"; pwm { @@ -584,6 +664,9 @@ reg = <0x44008000 0x400>; clocks = <&rcc TIM17_K>; clock-names = "int"; + dmas = <&dmamux1 111 0x400 0x1>, + <&dmamux1 112 0x400 0x1>; + dma-names = "ch1", "up"; status = "disabled"; pwm { @@ -684,14 +767,14 @@ m_can1: can@4400e000 { compatible = "bosch,m_can"; - reg = <0x4400e000 0x400>, <0x44011000 0x2800>; + reg = <0x4400e000 0x400>, <0x44011000 0x1400>; reg-names = "m_can", "message_ram"; interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "int0", "int1"; clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>; clock-names = "hclk", "cclk"; - bosch,mram-cfg = <0x0 0 0 32 0 0 2 2>; + bosch,mram-cfg = <0x1400 0 0 32 0 0 2 2>; status = "disabled"; }; @@ -908,6 +991,16 @@ status = "disabled"; }; + dts: thermal@50028000 { + compatible = "st,stm32-thermal"; + reg = <0x50028000 0x100>; + interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc TMPSENS>; + clock-names = "pclk"; + #thermal-sensor-cells = <0>; + status = "disabled"; + }; + cryp1: cryp@54001000 { compatible = "st,stm32mp1-cryp"; reg = <0x54001000 0x400>; diff --git a/dts/src/arm/sun4i-a10.dtsi b/dts/src/arm/sun4i-a10.dtsi index 5d46bb0139..73c3ac4209 100644 --- a/dts/src/arm/sun4i-a10.dtsi +++ b/dts/src/arm/sun4i-a10.dtsi @@ -184,6 +184,26 @@ status = "disabled"; }; + pmu { + compatible = "arm,cortex-a8-pmu"; + interrupts = <3>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + /* Address must be kept in the lower 256 MiBs of DRAM for VE. */ + default-pool { + compatible = "shared-dma-pool"; + size = <0x6000000>; + alloc-ranges = <0x4a000000 0x6000000>; + reusable; + linux,cma-default; + }; + }; + soc { compatible = "simple-bus"; #address-cells = <1>; @@ -224,6 +244,19 @@ status = "disabled"; }; }; + + sram_c: sram@1d00000 { + compatible = "mmio-sram"; + reg = <0x01d00000 0xd0000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x01d00000 0xd0000>; + + ve_sram: sram-section@0 { + compatible = "allwinner,sun4i-a10-sram-c1"; + reg = <0x000000 0x80000>; + }; + }; }; dma: dma-controller@1c02000 { @@ -394,6 +427,17 @@ }; }; + video-codec@1c0e000 { + compatible = "allwinner,sun4i-a10-video-engine"; + reg = <0x01c0e000 0x1000>; + clocks = <&ccu CLK_AHB_VE>, <&ccu CLK_VE>, + <&ccu CLK_DRAM_VE>; + clock-names = "ahb", "mod", "ram"; + resets = <&ccu RST_VE>; + interrupts = <53>; + allwinner,sram = <&ve_sram 1>; + }; + mmc0: mmc@1c0f000 { compatible = "allwinner,sun4i-a10-mmc"; reg = <0x01c0f000 0x1000>; diff --git a/dts/src/arm/sun5i-a13-q8-tablet.dts b/dts/src/arm/sun5i-a13-q8-tablet.dts index a89f29fa3e..7257f39b31 100644 --- a/dts/src/arm/sun5i-a13-q8-tablet.dts +++ b/dts/src/arm/sun5i-a13-q8-tablet.dts @@ -49,14 +49,15 @@ compatible = "allwinner,q8-a13", "allwinner,sun5i-a13"; panel: panel { - compatible = "urt,umsh-8596md-t", "simple-panel"; + compatible = "bananapi,s070wv20-ct16", "simple-panel"; + power-supply = <®_vcc3v3>; + enable-gpios = <&axp_gpio 0 GPIO_ACTIVE_HIGH>; /* AXP GPIO0 */ + backlight = <&backlight>; #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; - /* TODO: lcd panel uses axp gpio0 as enable pin */ - backlight = <&backlight>; #address-cells = <1>; #size-cells = <0>; diff --git a/dts/src/arm/sun5i-reference-design-tablet.dtsi b/dts/src/arm/sun5i-reference-design-tablet.dtsi index 6202aabedb..5b1f0e198e 100644 --- a/dts/src/arm/sun5i-reference-design-tablet.dtsi +++ b/dts/src/arm/sun5i-reference-design-tablet.dtsi @@ -54,7 +54,7 @@ pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>; brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; default-brightness-level = <8>; - /* TODO: backlight uses axp gpio1 as enable pin */ + enable-gpios = <&axp_gpio 1 GPIO_ACTIVE_HIGH>; /* AXP GPIO1 */ }; chosen { diff --git a/dts/src/arm/sun7i-a20-bananapi.dts b/dts/src/arm/sun7i-a20-bananapi.dts index 556b1b591c..81bc85d398 100644 --- a/dts/src/arm/sun7i-a20-bananapi.dts +++ b/dts/src/arm/sun7i-a20-bananapi.dts @@ -191,6 +191,11 @@ }; &pio { + vcc-pa-supply = <®_vcc3v3>; + vcc-pc-supply = <®_vcc3v3>; + vcc-pe-supply = <®_vcc3v3>; + vcc-pf-supply = <®_vcc3v3>; + vcc-pg-supply = <®_vcc3v3>; gpio-line-names = /* PA */ "ERXD3", "ERXD2", "ERXD1", "ERXD0", "ETXD3", diff --git a/dts/src/arm/sun8i-a23-a33.dtsi b/dts/src/arm/sun8i-a23-a33.dtsi index a9c123de5d..43fe215e83 100644 --- a/dts/src/arm/sun8i-a23-a33.dtsi +++ b/dts/src/arm/sun8i-a23-a33.dtsi @@ -68,6 +68,12 @@ }; }; + de: display-engine { + /* compatible gets set in SoC specific dtsi file */ + allwinner,pipelines = <&fe0>; + status = "disabled"; + }; + timer { compatible = "arm,armv7-timer"; interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, @@ -155,6 +161,55 @@ #dma-cells = <1>; }; + nfc: nand@1c03000 { + compatible = "allwinner,sun4i-a10-nand"; + reg = <0x01c03000 0x1000>; + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_NAND>, <&ccu CLK_NAND>; + clock-names = "ahb", "mod"; + resets = <&ccu RST_BUS_NAND>; + reset-names = "ahb"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + tcon0: lcd-controller@1c0c000 { + /* compatible gets set in SoC specific dtsi file */ + reg = <0x01c0c000 0x1000>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_LCD>, + <&ccu CLK_LCD_CH0>; + clock-names = "ahb", + "tcon-ch0"; + clock-output-names = "tcon-pixel-clock"; + resets = <&ccu RST_BUS_LCD>; + reset-names = "lcd"; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + tcon0_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + tcon0_in_drc0: endpoint@0 { + reg = <0>; + remote-endpoint = <&drc0_out_tcon0>; + }; + }; + + tcon0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + }; + }; + mmc0: mmc@1c0f000 { compatible = "allwinner,sun7i-a20-mmc"; reg = <0x01c0f000 0x1000>; @@ -214,21 +269,6 @@ #size-cells = <0>; }; - nfc: nand@1c03000 { - compatible = "allwinner,sun4i-a10-nand"; - reg = <0x01c03000 0x1000>; - interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu CLK_BUS_NAND>, <&ccu CLK_NAND>; - clock-names = "ahb", "mod"; - resets = <&ccu RST_BUS_NAND>; - reset-names = "ahb"; - pinctrl-names = "default"; - pinctrl-0 = <&nand_pins &nand_pins_cs0 &nand_pins_rb0>; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - usb_otg: usb@1c19000 { /* compatible gets set in SoC specific dtsi file */ reg = <0x01c19000 0x0400>; @@ -572,6 +612,111 @@ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; }; + fe0: display-frontend@1e00000 { + /* compatible gets set in SoC specific dtsi file */ + reg = <0x01e00000 0x20000>; + interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_DE_FE>, <&ccu CLK_DE_FE>, + <&ccu CLK_DRAM_DE_FE>; + clock-names = "ahb", "mod", + "ram"; + resets = <&ccu RST_BUS_DE_FE>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + fe0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + fe0_out_be0: endpoint@0 { + reg = <0>; + remote-endpoint = <&be0_in_fe0>; + }; + }; + }; + }; + + be0: display-backend@1e60000 { + /* compatible gets set in SoC specific dtsi file */ + reg = <0x01e60000 0x10000>; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_DE_BE>, <&ccu CLK_DE_BE>, + <&ccu CLK_DRAM_DE_BE>; + clock-names = "ahb", "mod", + "ram"; + resets = <&ccu RST_BUS_DE_BE>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + be0_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + be0_in_fe0: endpoint@0 { + reg = <0>; + remote-endpoint = <&fe0_out_be0>; + }; + }; + + be0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + be0_out_drc0: endpoint@0 { + reg = <0>; + remote-endpoint = <&drc0_in_be0>; + }; + }; + }; + }; + + drc0: drc@1e70000 { + /* compatible gets set in SoC specific dtsi file */ + reg = <0x01e70000 0x10000>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_DRC>, <&ccu CLK_DRC>, + <&ccu CLK_DRAM_DRC>; + clock-names = "ahb", "mod", "ram"; + resets = <&ccu RST_BUS_DRC>; + + assigned-clocks = <&ccu CLK_DRC>; + assigned-clock-rates = <300000000>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + drc0_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + drc0_in_be0: endpoint@0 { + reg = <0>; + remote-endpoint = <&be0_out_drc0>; + }; + }; + + drc0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + drc0_out_tcon0: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon0_in_drc0>; + }; + }; + }; + }; + rtc: rtc@1f00000 { compatible = "allwinner,sun8i-a23-rtc"; reg = <0x01f00000 0x400>; diff --git a/dts/src/arm/sun8i-a23-ippo-q8h-v1.2.dts b/dts/src/arm/sun8i-a23-ippo-q8h-v1.2.dts index b6958e8f2f..d4dab7c283 100644 --- a/dts/src/arm/sun8i-a23-ippo-q8h-v1.2.dts +++ b/dts/src/arm/sun8i-a23-ippo-q8h-v1.2.dts @@ -61,3 +61,7 @@ "Headset Mic", "HBIAS"; status = "okay"; }; + +&panel { + compatible = "bananapi,s070wv20-ct16", "simple-panel"; +}; diff --git a/dts/src/arm/sun8i-a23-ippo-q8h-v5.dts b/dts/src/arm/sun8i-a23-ippo-q8h-v5.dts index b6958e8f2f..d4dab7c283 100644 --- a/dts/src/arm/sun8i-a23-ippo-q8h-v5.dts +++ b/dts/src/arm/sun8i-a23-ippo-q8h-v5.dts @@ -61,3 +61,7 @@ "Headset Mic", "HBIAS"; status = "okay"; }; + +&panel { + compatible = "bananapi,s070wv20-ct16", "simple-panel"; +}; diff --git a/dts/src/arm/sun8i-a23-q8-tablet.dts b/dts/src/arm/sun8i-a23-q8-tablet.dts index b6958e8f2f..d4dab7c283 100644 --- a/dts/src/arm/sun8i-a23-q8-tablet.dts +++ b/dts/src/arm/sun8i-a23-q8-tablet.dts @@ -61,3 +61,7 @@ "Headset Mic", "HBIAS"; status = "okay"; }; + +&panel { + compatible = "bananapi,s070wv20-ct16", "simple-panel"; +}; diff --git a/dts/src/arm/sun8i-a23.dtsi b/dts/src/arm/sun8i-a23.dtsi index d00055e9ee..a5e884a8b2 100644 --- a/dts/src/arm/sun8i-a23.dtsi +++ b/dts/src/arm/sun8i-a23.dtsi @@ -62,10 +62,26 @@ }; }; +&be0 { + compatible = "allwinner,sun8i-a23-display-backend"; +}; + &ccu { compatible = "allwinner,sun8i-a23-ccu"; }; +&de { + compatible = "allwinner,sun8i-a23-display-engine"; +}; + +&drc0 { + compatible = "allwinner,sun8i-a23-drc"; +}; + +&fe0 { + compatible = "allwinner,sun8i-a23-display-frontend"; +}; + &pio { compatible = "allwinner,sun8i-a23-pinctrl"; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, @@ -73,6 +89,10 @@ <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; }; +&tcon0 { + compatible = "allwinner,sun8i-a23-tcon"; +}; + &usb_otg { compatible = "allwinner,sun6i-a31-musb"; }; diff --git a/dts/src/arm/sun8i-a33.dtsi b/dts/src/arm/sun8i-a33.dtsi index 626152c30f..1111a64981 100644 --- a/dts/src/arm/sun8i-a33.dtsi +++ b/dts/src/arm/sun8i-a33.dtsi @@ -159,12 +159,6 @@ }; }; - de: display-engine { - compatible = "allwinner,sun8i-a33-display-engine"; - allwinner,pipelines = <&fe0>; - status = "disabled"; - }; - iio-hwmon { compatible = "iio-hwmon"; io-channels = <&ths>; @@ -209,47 +203,6 @@ }; soc { - tcon0: lcd-controller@1c0c000 { - compatible = "allwinner,sun8i-a33-tcon"; - reg = <0x01c0c000 0x1000>; - interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu CLK_BUS_LCD>, - <&ccu CLK_LCD_CH0>; - clock-names = "ahb", - "tcon-ch0"; - clock-output-names = "tcon-pixel-clock"; - resets = <&ccu RST_BUS_LCD>; - reset-names = "lcd"; - status = "disabled"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - tcon0_in: port@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - - tcon0_in_drc0: endpoint@0 { - reg = <0>; - remote-endpoint = <&drc0_out_tcon0>; - }; - }; - - tcon0_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - - tcon0_out_dsi: endpoint@1 { - reg = <1>; - remote-endpoint = <&dsi_in_tcon0>; - }; - }; - }; - }; - video-codec@1c0e000 { compatible = "allwinner,sun8i-a33-video-engine"; reg = <0x01c0e000 0x1000>; @@ -339,115 +292,6 @@ status = "disabled"; #phy-cells = <0>; }; - - fe0: display-frontend@1e00000 { - compatible = "allwinner,sun8i-a33-display-frontend"; - reg = <0x01e00000 0x20000>; - interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu CLK_BUS_DE_FE>, <&ccu CLK_DE_FE>, - <&ccu CLK_DRAM_DE_FE>; - clock-names = "ahb", "mod", - "ram"; - resets = <&ccu RST_BUS_DE_FE>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - fe0_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - - fe0_out_be0: endpoint@0 { - reg = <0>; - remote-endpoint = <&be0_in_fe0>; - }; - }; - }; - }; - - be0: display-backend@1e60000 { - compatible = "allwinner,sun8i-a33-display-backend"; - reg = <0x01e60000 0x10000>, <0x01e80000 0x1000>; - reg-names = "be", "sat"; - interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu CLK_BUS_DE_BE>, <&ccu CLK_DE_BE>, - <&ccu CLK_DRAM_DE_BE>, <&ccu CLK_BUS_SAT>; - clock-names = "ahb", "mod", - "ram", "sat"; - resets = <&ccu RST_BUS_DE_BE>, <&ccu RST_BUS_SAT>; - reset-names = "be", "sat"; - assigned-clocks = <&ccu CLK_DE_BE>; - assigned-clock-rates = <300000000>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - be0_in: port@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - - be0_in_fe0: endpoint@0 { - reg = <0>; - remote-endpoint = <&fe0_out_be0>; - }; - }; - - be0_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - - be0_out_drc0: endpoint@0 { - reg = <0>; - remote-endpoint = <&drc0_in_be0>; - }; - }; - }; - }; - - drc0: drc@1e70000 { - compatible = "allwinner,sun8i-a33-drc"; - reg = <0x01e70000 0x10000>; - interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu CLK_BUS_DRC>, <&ccu CLK_DRC>, - <&ccu CLK_DRAM_DRC>; - clock-names = "ahb", "mod", "ram"; - resets = <&ccu RST_BUS_DRC>; - - assigned-clocks = <&ccu CLK_DRC>; - assigned-clock-rates = <300000000>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - drc0_in: port@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - - drc0_in_be0: endpoint@0 { - reg = <0>; - remote-endpoint = <&be0_out_drc0>; - }; - }; - - drc0_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - - drc0_out_tcon0: endpoint@0 { - reg = <0>; - remote-endpoint = <&tcon0_in_drc0>; - }; - }; - }; - }; }; thermal-zones { @@ -524,10 +368,37 @@ }; }; +&be0 { + compatible = "allwinner,sun8i-a33-display-backend"; + /* A33 has an extra "SAT" module packed inside the display backend */ + reg = <0x01e60000 0x10000>, <0x01e80000 0x1000>; + reg-names = "be", "sat"; + clocks = <&ccu CLK_BUS_DE_BE>, <&ccu CLK_DE_BE>, + <&ccu CLK_DRAM_DE_BE>, <&ccu CLK_BUS_SAT>; + clock-names = "ahb", "mod", + "ram", "sat"; + resets = <&ccu RST_BUS_DE_BE>, <&ccu RST_BUS_SAT>; + reset-names = "be", "sat"; + assigned-clocks = <&ccu CLK_DE_BE>; + assigned-clock-rates = <300000000>; +}; + &ccu { compatible = "allwinner,sun8i-a33-ccu"; }; +&de { + compatible = "allwinner,sun8i-a33-display-engine"; +}; + +&drc0 { + compatible = "allwinner,sun8i-a33-drc"; +}; + +&fe0 { + compatible = "allwinner,sun8i-a33-display-frontend"; +}; + &mali { operating-points-v2 = <&mali_opp_table>; }; @@ -544,6 +415,17 @@ }; +&tcon0 { + compatible = "allwinner,sun8i-a33-tcon"; +}; + +&tcon0_out { + tcon0_out_dsi: endpoint@1 { + reg = <1>; + remote-endpoint = <&dsi_in_tcon0>; + }; +}; + &usb_otg { compatible = "allwinner,sun8i-a33-musb"; }; diff --git a/dts/src/arm/sun8i-a83t-allwinner-h8homlet-v2.dts b/dts/src/arm/sun8i-a83t-allwinner-h8homlet-v2.dts index 1c012a4def..9c006fc188 100644 --- a/dts/src/arm/sun8i-a83t-allwinner-h8homlet-v2.dts +++ b/dts/src/arm/sun8i-a83t-allwinner-h8homlet-v2.dts @@ -154,6 +154,10 @@ #include "axp81x.dtsi" +&ac_power_supply { + status = "okay"; +}; + ®_aldo1 { regulator-always-on; regulator-min-microvolt = <1800000>; diff --git a/dts/src/arm/sun8i-a83t-bananapi-m3.dts b/dts/src/arm/sun8i-a83t-bananapi-m3.dts index 7d30d3e530..838be7b371 100644 --- a/dts/src/arm/sun8i-a83t-bananapi-m3.dts +++ b/dts/src/arm/sun8i-a83t-bananapi-m3.dts @@ -237,6 +237,14 @@ #include "axp81x.dtsi" +&ac_power_supply { + status = "okay"; +}; + +&battery_power_supply { + status = "okay"; +}; + ®_aldo1 { regulator-always-on; regulator-min-microvolt = <1800000>; diff --git a/dts/src/arm/sun8i-a83t-cubietruck-plus.dts b/dts/src/arm/sun8i-a83t-cubietruck-plus.dts index a5a9f5a060..fcbec3d7cc 100644 --- a/dts/src/arm/sun8i-a83t-cubietruck-plus.dts +++ b/dts/src/arm/sun8i-a83t-cubietruck-plus.dts @@ -247,6 +247,14 @@ #include "axp81x.dtsi" +&ac_power_supply { + status = "okay"; +}; + +&battery_power_supply { + status = "okay"; +}; + ®_aldo1 { regulator-always-on; regulator-min-microvolt = <1800000>; diff --git a/dts/src/arm/sun8i-h3-nanopi-m1-plus.dts b/dts/src/arm/sun8i-h3-nanopi-m1-plus.dts index 65cba10508..4ec94d72f0 100644 --- a/dts/src/arm/sun8i-h3-nanopi-m1-plus.dts +++ b/dts/src/arm/sun8i-h3-nanopi-m1-plus.dts @@ -67,6 +67,21 @@ pinctrl-names = "default"; reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ }; + + connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; +}; + +&de { + status = "okay"; }; &ehci1 { @@ -94,6 +109,16 @@ }; }; +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &ir { pinctrl-names = "default"; pinctrl-0 = <&ir_pins_a>; diff --git a/dts/src/arm/sun8i-q8-common.dtsi b/dts/src/arm/sun8i-q8-common.dtsi index 719ad769b8..53104f4cca 100644 --- a/dts/src/arm/sun8i-q8-common.dtsi +++ b/dts/src/arm/sun8i-q8-common.dtsi @@ -49,6 +49,26 @@ ethernet0 = &sdio_wifi; }; + panel: panel { + /* Tablet dts should provide panel compatible */ + backlight = <&backlight>; + enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */ + power-supply = <®_dc1sw>; + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + panel_input: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon0_out_lcd>; + }; + }; + }; + wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; /* @@ -64,6 +84,10 @@ }; }; +&de { + status = "okay"; +}; + &ehci0 { status = "okay"; }; @@ -90,6 +114,19 @@ }; }; +&tcon0 { + pinctrl-names = "default"; + pinctrl-0 = <&lcd_rgb666_pins>; + status = "okay"; +}; + +&tcon0_out { + tcon0_out_lcd: endpoint@0 { + reg = <0>; + remote-endpoint = <&panel_input>; + }; +}; + &usbphy { usb1_vbus-supply = <®_dldo1>; }; diff --git a/dts/src/arm/sun8i-r40-bananapi-m2-ultra.dts b/dts/src/arm/sun8i-r40-bananapi-m2-ultra.dts index 438b7b44da..c488aaacbd 100644 --- a/dts/src/arm/sun8i-r40-bananapi-m2-ultra.dts +++ b/dts/src/arm/sun8i-r40-bananapi-m2-ultra.dts @@ -102,6 +102,8 @@ wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&pio 6 10 GPIO_ACTIVE_LOW>; /* PG10 WIFI_EN */ + clocks = <&ccu CLK_OUTA>; + clock-names = "ext_clock"; }; }; @@ -196,6 +198,11 @@ status = "okay"; }; +&pio { + pinctrl-names = "default"; + pinctrl-0 = <&clk_out_a_pin>; +}; + ®_aldo2 { regulator-always-on; regulator-min-microvolt = <2500000>; @@ -250,12 +257,27 @@ regulator-name = "vcc-wifi-io"; }; +/* + * Our WiFi chip needs both DLDO2 and DLDO3 to be powered at the same + * time, with the two being in sync, to be able to meet maximum power + * consumption during transmits. Since this is not really supported + * right now, just use the two as always on, and we will fix it later. + */ + ®_dldo2 { + regulator-always-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-name = "vcc-wifi"; }; +®_dldo3 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi-2"; +}; + ®_dldo4 { regulator-min-microvolt = <2500000>; regulator-max-microvolt = <2500000>; @@ -278,6 +300,25 @@ status = "okay"; }; +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pg_pins>, <&uart3_rts_cts_pg_pins>; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + clocks = <&ccu CLK_OUTA>; + clock-names = "lpo"; + vbat-supply = <®_dldo2>; + vddio-supply = <®_dldo1>; + device-wakeup-gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */ + /* TODO host wake line connected to PMIC GPIO pins */ + shutdown-gpios = <&pio 7 12 GPIO_ACTIVE_HIGH>; /* PH12 */ + max-speed = <1500000>; + }; +}; + &usbphy { usb1_vbus-supply = <®_vcc5v0>; usb2_vbus-supply = <®_vcc5v0>; diff --git a/dts/src/arm/sun8i-r40.dtsi b/dts/src/arm/sun8i-r40.dtsi index 89762dbefe..06b685869f 100644 --- a/dts/src/arm/sun8i-r40.dtsi +++ b/dts/src/arm/sun8i-r40.dtsi @@ -342,6 +342,11 @@ #interrupt-cells = <3>; #gpio-cells = <3>; + clk_out_a_pin: clk-out-a-pin { + pins = "PI12"; + function = "clk_out_a"; + }; + gmac_rgmii_pins: gmac-rgmii-pins { pins = "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", @@ -389,6 +394,16 @@ pins = "PB22", "PB23"; function = "uart0"; }; + + uart3_pg_pins: uart3-pg-pins { + pins = "PG6", "PG7"; + function = "uart3"; + }; + + uart3_rts_cts_pg_pins: uart3-rts-cts-pg-pins { + pins = "PG8", "PG9"; + function = "uart3"; + }; }; wdt: watchdog@1c20c90 { diff --git a/dts/src/arm/sun9i-a80-cubieboard4.dts b/dts/src/arm/sun9i-a80-cubieboard4.dts index 85da85faf8..28c034928d 100644 --- a/dts/src/arm/sun9i-a80-cubieboard4.dts +++ b/dts/src/arm/sun9i-a80-cubieboard4.dts @@ -133,6 +133,19 @@ status = "okay"; }; +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_rgmii_pins>; + phy = <&phy1>; + phy-mode = "rgmii"; + phy-supply = <®_cldo1>; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + &i2c3 { pinctrl-names = "default"; pinctrl-0 = <&i2c3_pins>; @@ -183,10 +196,26 @@ clocks = <&ac100_rtc 0>; }; +&pio { + vcc-pa-supply = <®_ldo_io1>; + vcc-pb-supply = <®_aldo2>; + vcc-pc-supply = <®_dcdc1>; + vcc-pd-supply = <®_dc1sw>; + vcc-pe-supply = <®_eldo2>; + vcc-pf-supply = <®_dcdc1>; + vcc-pg-supply = <®_ldo_io0>; + vcc-ph-supply = <®_dcdc1>; +}; + &r_ir { status = "okay"; }; +&r_pio { + vcc-pl-supply = <®_dldo2>; + vcc-pm-supply = <®_eldo3>; +}; + &r_rsb { status = "okay"; @@ -217,6 +246,10 @@ /* unused */ }; + reg_dc1sw: dc1sw { + regulator-name = "vcc-pd"; + }; + reg_dc5ldo: dc5ldo { regulator-always-on; regulator-min-microvolt = <800000>; @@ -271,7 +304,6 @@ }; reg_dldo2: dldo2 { - regulator-always-on; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; regulator-name = "vcc-pl"; @@ -290,14 +322,12 @@ }; reg_eldo3: eldo3 { - regulator-always-on; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; regulator-name = "vcc-pm-codec-io1"; }; reg_ldo_io0: ldo_io0 { - regulator-always-on; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; regulator-name = "vcc-pg"; @@ -385,6 +415,14 @@ */ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + /* + * The PHY requires 20ms after all voltages + * are applied until core logic is ready and + * 30ms after the reset pin is de-asserted. + * Set a 100ms delay to account for PMIC + * ramp time and board traces. + */ + regulator-enable-ramp-delay = <100000>; regulator-name = "vcc-gmac-phy"; }; diff --git a/dts/src/arm/sun9i-a80-optimus.dts b/dts/src/arm/sun9i-a80-optimus.dts index 58a199b0e4..864715ec3c 100644 --- a/dts/src/arm/sun9i-a80-optimus.dts +++ b/dts/src/arm/sun9i-a80-optimus.dts @@ -120,6 +120,19 @@ status = "okay"; }; +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_rgmii_pins>; + phy = <&phy1>; + phy-mode = "rgmii"; + phy-supply = <®_cldo1>; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins>; @@ -172,10 +185,26 @@ clocks = <&ac100_rtc 0>; }; +&pio { + vcc-pa-supply = <®_ldo_io1>; + vcc-pb-supply = <®_aldo2>; + vcc-pc-supply = <®_dcdc1>; + vcc-pd-supply = <®_dcdc1>; + vcc-pe-supply = <®_eldo2>; + vcc-pf-supply = <®_dcdc1>; + vcc-pg-supply = <®_ldo_io0>; + vcc-ph-supply = <®_dcdc1>; +}; + &r_ir { status = "okay"; }; +&r_pio { + vcc-pl-supply = <®_dldo2>; + vcc-pm-supply = <®_eldo3>; +}; + &r_rsb { status = "okay"; @@ -213,6 +242,10 @@ regulator-name = "vdd-cpus-09-usbh"; }; + dc1sw { + /* unused */ + }; + reg_dcdc1: dcdc1 { regulator-always-on; regulator-min-microvolt = <3000000>; @@ -260,7 +293,6 @@ }; reg_dldo2: dldo2 { - regulator-always-on; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; regulator-name = "vcc-pl"; @@ -279,14 +311,12 @@ }; reg_eldo3: eldo3 { - regulator-always-on; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; regulator-name = "vcc-pm-codec-io1"; }; reg_ldo_io0: ldo_io0 { - regulator-always-on; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; regulator-name = "vcc-pg"; @@ -374,6 +404,14 @@ */ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + /* + * The PHY requires 20ms after all voltages + * are applied until core logic is ready and + * 30ms after the reset pin is de-asserted. + * Set a 100ms delay to account for PMIC + * ramp time and board traces. + */ + regulator-enable-ramp-delay = <100000>; regulator-name = "vcc-gmac-phy"; }; diff --git a/dts/src/arm/sun9i-a80.dtsi b/dts/src/arm/sun9i-a80.dtsi index d9532fb1ef..6fb292e0b6 100644 --- a/dts/src/arm/sun9i-a80.dtsi +++ b/dts/src/arm/sun9i-a80.dtsi @@ -56,6 +56,10 @@ #size-cells = <2>; interrupt-parent = <&gic>; + aliases { + ethernet0 = &gmac; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -183,6 +187,37 @@ clock-output-names = "osc32k"; }; + /* + * The following two are dummy clocks, placeholders + * used in the gmac_tx clock. The gmac driver will + * choose one parent depending on the PHY interface + * mode, using clk_set_rate auto-reparenting. + * + * The actual TX clock rate is not controlled by the + * gmac_tx clock. + */ + mii_phy_tx_clk: mii_phy_tx_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <25000000>; + clock-output-names = "mii_phy_tx"; + }; + + gmac_int_tx_clk: gmac_int_tx_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "gmac_int_tx"; + }; + + gmac_tx_clk: clk@800030 { + #clock-cells = <0>; + compatible = "allwinner,sun7i-a20-gmac-clk"; + reg = <0x00800030 0x4>; + clocks = <&mii_phy_tx_clk>, <&gmac_int_tx_clk>; + clock-output-names = "gmac_tx"; + }; + cpus_clk: clk@8001410 { compatible = "allwinner,sun9i-a80-cpus-clk"; reg = <0x08001410 0x4>; @@ -283,6 +318,23 @@ }; }; + gmac: ethernet@830000 { + compatible = "allwinner,sun7i-a20-gmac"; + reg = <0x00830000 0x1054>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + clocks = <&ccu CLK_BUS_GMAC>, <&gmac_tx_clk>; + clock-names = "stmmaceth", "allwinner_gmac_tx"; + resets = <&ccu RST_BUS_GMAC>; + reset-names = "stmmaceth"; + snps,pbl = <2>; + snps,fixed-burst; + snps,force_sf_dma_mode; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + ehci0: usb@a00000 { compatible = "allwinner,sun9i-a80-ehci", "generic-ehci"; reg = <0x00a00000 0x100>; @@ -948,6 +1000,19 @@ #size-cells = <0>; #gpio-cells = <3>; + gmac_rgmii_pins: gmac-rgmii-pins { + allwinner,pins = "PA0", "PA1", "PA2", "PA3", + "PA4", "PA5", "PA7", "PA8", + "PA9", "PA10", "PA12", "PA13", + "PA15", "PA16", "PA17"; + allwinner,function = "gmac"; + /* + * data lines in RGMII mode use DDR mode + * and need a higher signal drive strength + */ + drive-strength = <40>; + }; + i2c3_pins: i2c3-pins { pins = "PG10", "PG11"; function = "i2c3"; diff --git a/dts/src/arm/sunxi-bananapi-m2-plus.dtsi b/dts/src/arm/sunxi-bananapi-m2-plus.dtsi index b3283aeb5b..3bed375b9c 100644 --- a/dts/src/arm/sunxi-bananapi-m2-plus.dtsi +++ b/dts/src/arm/sunxi-bananapi-m2-plus.dtsi @@ -103,6 +103,8 @@ compatible = "mmc-pwrseq-simple"; pinctrl-names = "default"; reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ + clocks = <&rtc 1>; + clock-names = "ext_clock"; }; }; @@ -215,7 +217,19 @@ &uart1 { pinctrl-names = "default"; pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; - status = "okay"; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + clocks = <&rtc 1>; + clock-names = "lpo"; + vbat-supply = <®_vcc3v3>; + vddio-supply = <®_vcc3v3>; + device-wakeup-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */ + host-wakeup-gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */ + shutdown-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */ + }; }; &usb_otg { diff --git a/dts/src/arm/sunxi-h3-h5.dtsi b/dts/src/arm/sunxi-h3-h5.dtsi index a4c757c0b7..d74a6cbbfd 100644 --- a/dts/src/arm/sunxi-h3-h5.dtsi +++ b/dts/src/arm/sunxi-h3-h5.dtsi @@ -740,8 +740,7 @@ }; csi: camera@1cb0000 { - compatible = "allwinner,sun8i-h3-csi", - "allwinner,sun6i-a31-csi"; + compatible = "allwinner,sun8i-h3-csi"; reg = <0x01cb0000 0x1000>; interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_BUS_CSI>, diff --git a/dts/src/arm/tegra114-dalmore.dts b/dts/src/arm/tegra114-dalmore.dts index 1788556b49..97a5c3504b 100644 --- a/dts/src/arm/tegra114-dalmore.dts +++ b/dts/src/arm/tegra114-dalmore.dts @@ -1087,7 +1087,7 @@ status = "okay"; spi-max-frequency = <25000000>; spi-flash@0 { - compatible = "winbond,w25q32dw"; + compatible = "winbond,w25q32dw", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <20000000>; }; diff --git a/dts/src/arm/tegra124-jetson-tk1.dts b/dts/src/arm/tegra124-jetson-tk1.dts index 9151b3ebb8..33bbb1c528 100644 --- a/dts/src/arm/tegra124-jetson-tk1.dts +++ b/dts/src/arm/tegra124-jetson-tk1.dts @@ -1656,7 +1656,7 @@ status = "okay"; spi-max-frequency = <25000000>; spi-flash@0 { - compatible = "winbond,w25q32dw"; + compatible = "winbond,w25q32dw", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <20000000>; }; diff --git a/dts/src/arm/tegra124-nyan.dtsi b/dts/src/arm/tegra124-nyan.dtsi index bc85b6a166..a1acd872bc 100644 --- a/dts/src/arm/tegra124-nyan.dtsi +++ b/dts/src/arm/tegra124-nyan.dtsi @@ -370,7 +370,7 @@ spi-max-frequency = <25000000>; flash@0 { - compatible = "winbond,w25q32dw"; + compatible = "winbond,w25q32dw", "jedec,spi-nor"; spi-max-frequency = <25000000>; reg = <0>; }; diff --git a/dts/src/arm/tegra124-venice2.dts b/dts/src/arm/tegra124-venice2.dts index 82d139648e..4882b61fb6 100644 --- a/dts/src/arm/tegra124-venice2.dts +++ b/dts/src/arm/tegra124-venice2.dts @@ -879,7 +879,7 @@ status = "okay"; spi-max-frequency = <25000000>; spi-flash@0 { - compatible = "winbond,w25q32dw"; + compatible = "winbond,w25q32dw", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <20000000>; }; diff --git a/dts/src/arm/tegra20-trimslice.dts b/dts/src/arm/tegra20-trimslice.dts index 9eb26dc15f..3e5ac096d8 100644 --- a/dts/src/arm/tegra20-trimslice.dts +++ b/dts/src/arm/tegra20-trimslice.dts @@ -287,7 +287,7 @@ status = "okay"; spi-max-frequency = <48000000>; spi-flash@0 { - compatible = "winbond,w25q80bl"; + compatible = "winbond,w25q80bl", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <48000000>; }; diff --git a/dts/src/arm/tegra20.dtsi b/dts/src/arm/tegra20.dtsi index dcad6d6128..8c942e6070 100644 --- a/dts/src/arm/tegra20.dtsi +++ b/dts/src/arm/tegra20.dtsi @@ -616,17 +616,14 @@ }; mc: memory-controller@7000f000 { - compatible = "nvidia,tegra20-mc"; - reg = <0x7000f000 0x024 - 0x7000f03c 0x3c4>; + compatible = "nvidia,tegra20-mc-gart"; + reg = <0x7000f000 0x400 /* controller registers */ + 0x58000000 0x02000000>; /* GART aperture */ + clocks = <&tegra_car TEGRA20_CLK_MC>; + clock-names = "mc"; interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; #reset-cells = <1>; - }; - - iommu@7000f024 { - compatible = "nvidia,tegra20-gart"; - reg = <0x7000f024 0x00000018 /* controller registers */ - 0x58000000 0x02000000>; /* GART aperture */ + #iommu-cells = <0>; }; memory-controller@7000f400 { diff --git a/dts/src/arm/tegra30-beaver.dts b/dts/src/arm/tegra30-beaver.dts index b0d40ac8ac..a3b0f3555c 100644 --- a/dts/src/arm/tegra30-beaver.dts +++ b/dts/src/arm/tegra30-beaver.dts @@ -1886,7 +1886,7 @@ status = "okay"; spi-max-frequency = <25000000>; spi-flash@1 { - compatible = "winbond,w25q32"; + compatible = "winbond,w25q32", "jedec,spi-nor"; reg = <1>; spi-max-frequency = <20000000>; }; diff --git a/dts/src/arm/tegra30-cardhu.dtsi b/dts/src/arm/tegra30-cardhu.dtsi index fb9222b479..7ce61edd52 100644 --- a/dts/src/arm/tegra30-cardhu.dtsi +++ b/dts/src/arm/tegra30-cardhu.dtsi @@ -360,7 +360,7 @@ status = "okay"; spi-max-frequency = <25000000>; spi-flash@1 { - compatible = "winbond,w25q32"; + compatible = "winbond,w25q32", "jedec,spi-nor"; reg = <1>; spi-max-frequency = <20000000>; }; diff --git a/dts/src/arm/versatile-ab.dts b/dts/src/arm/versatile-ab.dts index 6f4f60ba54..269e6bf99c 100644 --- a/dts/src/arm/versatile-ab.dts +++ b/dts/src/arm/versatile-ab.dts @@ -1,6 +1,5 @@ // SPDX-License-Identifier: GPL-2.0 /dts-v1/; -/include/ "skeleton.dtsi" / { model = "ARM Versatile AB"; @@ -21,6 +20,7 @@ }; memory { + device_type = "memory"; reg = <0x0 0x08000000>; }; diff --git a/dts/src/arm/vexpress-v2m-rs1.dtsi b/dts/src/arm/vexpress-v2m-rs1.dtsi index a9569d15de..d3963e9eaf 100644 --- a/dts/src/arm/vexpress-v2m-rs1.dtsi +++ b/dts/src/arm/vexpress-v2m-rs1.dtsi @@ -133,7 +133,7 @@ mmci@50000 { compatible = "arm,pl180", "arm,primecell"; reg = <0x050000 0x1000>; - interrupts = <9 10>; + interrupts = <9>, <10>; cd-gpios = <&v2m_mmc_gpios 0 0>; wp-gpios = <&v2m_mmc_gpios 1 0>; max-frequency = <12000000>; diff --git a/dts/src/arm/vexpress-v2m.dtsi b/dts/src/arm/vexpress-v2m.dtsi index fd42e11941..798c97aff7 100644 --- a/dts/src/arm/vexpress-v2m.dtsi +++ b/dts/src/arm/vexpress-v2m.dtsi @@ -133,7 +133,7 @@ mmci@5000 { compatible = "arm,pl180", "arm,primecell"; reg = <0x05000 0x1000>; - interrupts = <9 10>; + interrupts = <9>, <10>; cd-gpios = <&v2m_mmc_gpios 0 0>; wp-gpios = <&v2m_mmc_gpios 1 0>; max-frequency = <12000000>; diff --git a/dts/src/arm/vexpress-v2p-ca15_a7.dts b/dts/src/arm/vexpress-v2p-ca15_a7.dts index a2ccacd07f..00cd9f5bef 100644 --- a/dts/src/arm/vexpress-v2p-ca15_a7.dts +++ b/dts/src/arm/vexpress-v2p-ca15_a7.dts @@ -42,6 +42,7 @@ cci-control-port = <&cci_control1>; cpu-idle-states = <&CLUSTER_SLEEP_BIG>; capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <990>; }; cpu1: cpu@1 { @@ -51,6 +52,7 @@ cci-control-port = <&cci_control1>; cpu-idle-states = <&CLUSTER_SLEEP_BIG>; capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <990>; }; cpu2: cpu@2 { @@ -60,6 +62,7 @@ cci-control-port = <&cci_control2>; cpu-idle-states = <&CLUSTER_SLEEP_LITTLE>; capacity-dmips-mhz = <516>; + dynamic-power-coefficient = <133>; }; cpu3: cpu@3 { @@ -69,6 +72,7 @@ cci-control-port = <&cci_control2>; cpu-idle-states = <&CLUSTER_SLEEP_LITTLE>; capacity-dmips-mhz = <516>; + dynamic-power-coefficient = <133>; }; cpu4: cpu@4 { @@ -78,6 +82,7 @@ cci-control-port = <&cci_control2>; cpu-idle-states = <&CLUSTER_SLEEP_LITTLE>; capacity-dmips-mhz = <516>; + dynamic-power-coefficient = <133>; }; idle-states { diff --git a/dts/src/arm/vf610-bk4.dts b/dts/src/arm/vf610-bk4.dts index b08d561d67..3fa0cbe456 100644 --- a/dts/src/arm/vf610-bk4.dts +++ b/dts/src/arm/vf610-bk4.dts @@ -60,6 +60,29 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; + + spi-gpio { + compatible = "spi-gpio"; + pinctrl-0 = <&pinctrl_gpio_spi>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + /* PTD12 ->RPIO[91] */ + sck-gpios = <&gpio2 27 GPIO_ACTIVE_LOW>; + /* PTD10 ->RPIO[89] */ + miso-gpios = <&gpio2 25 GPIO_ACTIVE_HIGH>; + num-chipselects = <0>; + + gpio@0 { + compatible = "pisosr-gpio"; + reg = <0>; + gpio-controller; + #gpio-cells = <2>; + /* PTB18 -> RGPIO[40] */ + load-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; + spi-max-frequency = <100000>; + }; + }; }; &adc0 { @@ -431,6 +454,14 @@ >; }; + pinctrl_gpio_spi: pinctrl-gpio-spi { + fsl,pins = < + VF610_PAD_PTB18__GPIO_40 0x1183 + VF610_PAD_PTD10__GPIO_89 0x1183 + VF610_PAD_PTD12__GPIO_91 0x1183 + >; + }; + pinctrl_i2c2: i2c2grp { fsl,pins = < VF610_PAD_PTA22__I2C2_SCL 0x34df diff --git a/dts/src/arm/vf610-zii-cfu1.dts b/dts/src/arm/vf610-zii-cfu1.dts index 7cdcc5fe82..445c7dc306 100644 --- a/dts/src/arm/vf610-zii-cfu1.dts +++ b/dts/src/arm/vf610-zii-cfu1.dts @@ -207,7 +207,7 @@ }; &i2c0 { - clock-frequency = <100000>; + clock-frequency = <400000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c0>; status = "okay"; diff --git a/dts/src/arm/vf610-zii-ssmb-dtu.dts b/dts/src/arm/vf610-zii-ssmb-dtu.dts new file mode 100644 index 0000000000..2b10672fad --- /dev/null +++ b/dts/src/arm/vf610-zii-ssmb-dtu.dts @@ -0,0 +1,311 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) + +/* + * Device tree file for ZII's SSMB DTU board + * + * SSMB - SPU3 Switch Management Board + * DTU - Digital Tapping Unit + * + * Copyright (C) 2015-2019 Zodiac Inflight Innovations + * + * Based on an original 'vf610-twr.dts' which is Copyright 2015, + * Freescale Semiconductor, Inc. + */ + +/dts-v1/; +#include "vf610.dtsi" + +/ { + model = "ZII VF610 SSMB DTU Board"; + compatible = "zii,vf610dtu", "zii,vf610dev", "fsl,vf610"; + + chosen { + stdout-path = &uart0; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x20000000>; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-0 = <&pinctrl_leds_debug>; + pinctrl-names = "default"; + + led-debug { + label = "zii:green:debug1"; + gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + max-brightness = <1>; + }; + }; + + reg_vcc_3v3_mcu: regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_3v3_mcu"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&adc0 { + vref-supply = <®_vcc_3v3_mcu>; + status = "okay"; +}; + +&adc1 { + vref-supply = <®_vcc_3v3_mcu>; + status = "okay"; +}; + +&edma0 { + status = "okay"; +}; + +&edma1 { + status = "okay"; +}; + +&esdhc0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc0>; + bus-width = <8>; + non-removable; + no-1-8-v; + keep-power-in-suspend; + status = "okay"; +}; + +&esdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1>; + bus-width = <4>; + status = "okay"; +}; + +&fec1 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + status = "okay"; + + fixed-link { + speed = <100>; + full-duplex; + }; + + mdio1: mdio { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + switch0: switch0@0 { + compatible = "marvell,mv88e6190"; + pinctrl-0 = <&pinctrl_gpio_switch0>; + pinctrl-names = "default"; + reg = <0>; + eeprom-length = <65536>; + reset-gpios = <&gpio3 11 GPIO_ACTIVE_LOW>; + interrupt-parent = <&gpio3>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <2>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "cpu"; + ethernet = <&fec1>; + + fixed-link { + speed = <100>; + full-duplex; + }; + }; + + port@1 { + reg = <1>; + label = "eth_cu_100_3"; + }; + + port@5 { + reg = <5>; + label = "eth_cu_1000_4"; + }; + + port@6 { + reg = <6>; + label = "eth_cu_1000_5"; + }; + + port@8 { + reg = <8>; + label = "eth_cu_1000_1"; + }; + + port@9 { + reg = <9>; + label = "eth_cu_1000_2"; + phy-handle = <&phy9>; + phy-mode = "sgmii"; + managed = "in-band-status"; + }; + }; + + mdio1 { + compatible = "marvell,mv88e6xxx-mdio-external"; + #address-cells = <1>; + #size-cells = <0>; + + phy9: phy9@0 { + compatible = "ethernet-phy-ieee802.3-c45"; + pinctrl-0 = <&pinctrl_gpio_phy9>; + pinctrl-names = "default"; + interrupt-parent = <&gpio2>; + interrupts = <30 IRQ_TYPE_LEVEL_LOW>; + reg = <0>; + }; + }; + }; + }; +}; + +&i2c0 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c0>; + status = "okay"; + + gpio6: gpio-expander@22 { + compatible = "nxp,pca9554"; + reg = <0x22>; + gpio-controller; + #gpio-cells = <2>; + }; + + /* On SSMB */ + temperature-sensor@48 { + compatible = "national,lm75"; + reg = <0x48>; + }; + + /* On DSB */ + temperature-sensor@4d { + compatible = "national,lm75"; + reg = <0x4d>; + }; + + eeprom@50 { + compatible = "atmel,24c04"; + reg = <0x50>; + label = "nameplate"; + }; + + eeprom@52 { + compatible = "atmel,24c04"; + reg = <0x52>; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0>; + status = "okay"; +}; + +&iomuxc { + pinctrl_dspi1: dspi1grp { + fsl,pins = < + VF610_PAD_PTD5__DSPI1_CS0 0x1182 + VF610_PAD_PTD4__DSPI1_CS1 0x1182 + VF610_PAD_PTC6__DSPI1_SIN 0x1181 + VF610_PAD_PTC7__DSPI1_SOUT 0x1182 + VF610_PAD_PTC8__DSPI1_SCK 0x1182 + >; + }; + + pinctrl_esdhc0: esdhc0grp { + fsl,pins = < + VF610_PAD_PTC0__ESDHC0_CLK 0x31ef + VF610_PAD_PTC1__ESDHC0_CMD 0x31ef + VF610_PAD_PTC2__ESDHC0_DAT0 0x31ef + VF610_PAD_PTC3__ESDHC0_DAT1 0x31ef + VF610_PAD_PTC4__ESDHC0_DAT2 0x31ef + VF610_PAD_PTC5__ESDHC0_DAT3 0x31ef + VF610_PAD_PTD23__ESDHC0_DAT4 0x31ef + VF610_PAD_PTD22__ESDHC0_DAT5 0x31ef + VF610_PAD_PTD21__ESDHC0_DAT6 0x31ef + VF610_PAD_PTD20__ESDHC0_DAT7 0x31ef + >; + }; + + pinctrl_esdhc1: esdhc1grp { + fsl,pins = < + VF610_PAD_PTA24__ESDHC1_CLK 0x31ef + VF610_PAD_PTA25__ESDHC1_CMD 0x31ef + VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef + VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef + VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef + VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef + >; + }; + + pinctrl_fec1: fec1grp { + fsl,pins = < + VF610_PAD_PTA6__RMII_CLKIN 0x30d1 + VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2 + VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3 + VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1 + VF610_PAD_PTC12__ENET_RMII1_RXD1 0x30d1 + VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1 + VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1 + VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2 + VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2 + VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2 + >; + }; + + pinctrl_gpio_phy9: pinctrl-gpio-phy9 { + fsl,pins = < + VF610_PAD_PTB24__GPIO_94 0x219d + >; + }; + + pinctrl_gpio_switch0: pinctrl-gpio-switch0 { + fsl,pins = < + VF610_PAD_PTE2__GPIO_107 0x31c2 + VF610_PAD_PTB28__GPIO_98 0x219d + >; + }; + + pinctrl_i2c0: i2c0grp { + fsl,pins = < + VF610_PAD_PTB14__I2C0_SCL 0x37ff + VF610_PAD_PTB15__I2C0_SDA 0x37ff + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + VF610_PAD_PTB16__I2C1_SCL 0x37ff + VF610_PAD_PTB17__I2C1_SDA 0x37ff + >; + }; + + pinctrl_leds_debug: pinctrl-leds-debug { + fsl,pins = < + VF610_PAD_PTD3__GPIO_82 0x31c2 + >; + }; + + pinctrl_uart0: uart0grp { + fsl,pins = < + VF610_PAD_PTB10__UART0_TX 0x21a2 + VF610_PAD_PTB11__UART0_RX 0x21a1 + >; + }; +}; diff --git a/dts/src/arm/vf610-zii-ssmb-spu3.dts b/dts/src/arm/vf610-zii-ssmb-spu3.dts index 757af56e8e..0d9fe5ac83 100644 --- a/dts/src/arm/vf610-zii-ssmb-spu3.dts +++ b/dts/src/arm/vf610-zii-ssmb-spu3.dts @@ -99,6 +99,8 @@ non-removable; no-1-8-v; keep-power-in-suspend; + no-sdio; + no-sd; status = "okay"; }; @@ -106,6 +108,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc1>; bus-width = <4>; + no-sdio; status = "okay"; }; diff --git a/dts/src/arm/vt8500.dtsi b/dts/src/arm/vt8500.dtsi index 1929ad390d..8b5af039b0 100644 --- a/dts/src/arm/vt8500.dtsi +++ b/dts/src/arm/vt8500.dtsi @@ -6,9 +6,9 @@ * Licensed under GPLv2 or later */ -/include/ "skeleton.dtsi" - / { + #address-cells = <1>; + #size-cells = <1>; compatible = "via,vt8500"; cpus { @@ -21,6 +21,11 @@ }; }; + memory { + device_type = "memory"; + reg = <0x0 0x0>; + }; + aliases { serial0 = &uart0; serial1 = &uart1; diff --git a/dts/src/arm/wm8505.dtsi b/dts/src/arm/wm8505.dtsi index e9ef539e13..cca6747304 100644 --- a/dts/src/arm/wm8505.dtsi +++ b/dts/src/arm/wm8505.dtsi @@ -6,9 +6,9 @@ * Licensed under GPLv2 or later */ -/include/ "skeleton.dtsi" - / { + #address-cells = <1>; + #size-cells = <1>; compatible = "wm,wm8505"; cpus { @@ -21,6 +21,11 @@ }; }; + memory { + device_type = "memory"; + reg = <0x0 0x0>; + }; + aliases { serial0 = &uart0; serial1 = &uart1; diff --git a/dts/src/arm/wm8650.dtsi b/dts/src/arm/wm8650.dtsi index e12213d166..00d01769a6 100644 --- a/dts/src/arm/wm8650.dtsi +++ b/dts/src/arm/wm8650.dtsi @@ -6,9 +6,9 @@ * Licensed under GPLv2 or later */ -/include/ "skeleton.dtsi" - / { + #address-cells = <1>; + #size-cells = <1>; compatible = "wm,wm8650"; cpus { @@ -21,6 +21,11 @@ }; }; + memory { + device_type = "memory"; + reg = <0x0 0x0>; + }; + aliases { serial0 = &uart0; serial1 = &uart1; diff --git a/dts/src/arm/wm8750.dtsi b/dts/src/arm/wm8750.dtsi index 46d076d730..54d8f7d9bb 100644 --- a/dts/src/arm/wm8750.dtsi +++ b/dts/src/arm/wm8750.dtsi @@ -6,9 +6,9 @@ * Licensed under GPLv2 or later */ -/include/ "skeleton.dtsi" - / { + #address-cells = <1>; + #size-cells = <1>; compatible = "wm,wm8750"; cpus { @@ -21,6 +21,11 @@ }; }; + memory { + device_type = "memory"; + reg = <0x0 0x0>; + }; + aliases { serial0 = &uart0; serial1 = &uart1; diff --git a/dts/src/arm/wm8850.dtsi b/dts/src/arm/wm8850.dtsi index 8fbccfbe75..c572d77707 100644 --- a/dts/src/arm/wm8850.dtsi +++ b/dts/src/arm/wm8850.dtsi @@ -6,9 +6,9 @@ * Licensed under GPLv2 or later */ -/include/ "skeleton.dtsi" - / { + #address-cells = <1>; + #size-cells = <1>; compatible = "wm,wm8850"; cpus { @@ -22,6 +22,11 @@ }; }; + memory { + device_type = "memory"; + reg = <0x0 0x0>; + }; + aliases { serial0 = &uart0; serial1 = &uart1; diff --git a/dts/src/arm/zx296702-ad1.dts b/dts/src/arm/zx296702-ad1.dts index eedd3fcbc0..bd94008400 100644 --- a/dts/src/arm/zx296702-ad1.dts +++ b/dts/src/arm/zx296702-ad1.dts @@ -14,6 +14,7 @@ }; memory { + device_type = "memory"; reg = <0x50000000 0x20000000>; }; }; diff --git a/dts/src/arm/zx296702.dtsi b/dts/src/arm/zx296702.dtsi index 240e7a23d8..afd98de029 100644 --- a/dts/src/arm/zx296702.dtsi +++ b/dts/src/arm/zx296702.dtsi @@ -1,10 +1,12 @@ // SPDX-License-Identifier: GPL-2.0 -#include "skeleton.dtsi" #include <dt-bindings/clock/zx296702-clock.h> #include <dt-bindings/interrupt-controller/arm-gic.h> / { + #address-cells = <1>; + #size-cells = <1>; + cpus { #address-cells = <1>; #size-cells = <0>; diff --git a/dts/src/arm/zynq-zturn.dts b/dts/src/arm/zynq-zturn.dts index b387046579..5ec616ebca 100644 --- a/dts/src/arm/zynq-zturn.dts +++ b/dts/src/arm/zynq-zturn.dts @@ -54,7 +54,7 @@ label = "K1"; gpios = <&gpio0 0x32 0x1>; linux,code = <0x66>; - gpio-key,wakeup; + wakeup-source; autorepeat; }; }; diff --git a/dts/src/arm64/actions/s700-cubieboard7.dts b/dts/src/arm64/actions/s700-cubieboard7.dts index 28f3f4a0f7..63e375cd9e 100644 --- a/dts/src/arm64/actions/s700-cubieboard7.dts +++ b/dts/src/arm64/actions/s700-cubieboard7.dts @@ -30,6 +30,59 @@ }; }; +&i2c0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_default>; +}; + +&i2c1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_default>; +}; + +&i2c2 { + status = "disabled"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_default>; +}; + +&pinctrl { + i2c0_default: i2c0_default { + pinmux { + groups = "i2c0_mfp"; + function = "i2c0"; + }; + pinconf { + pins = "i2c0_sclk", "i2c0_sdata"; + bias-pull-up; + }; + }; + + i2c1_default: i2c1_default { + pinmux { + groups = "i2c1_dummy"; + function = "i2c1"; + }; + pinconf { + pins = "i2c1_sclk", "i2c1_sdata"; + bias-pull-up; + }; + }; + + i2c2_default: i2c2_default { + pinmux { + groups = "i2c2_dummy"; + function = "i2c2"; + }; + pinconf { + pins = "i2c2_sclk", "i2c2_sdata"; + bias-pull-up; + }; + }; +}; + &timer { clocks = <&hosc>; }; diff --git a/dts/src/arm64/actions/s700.dtsi b/dts/src/arm64/actions/s700.dtsi index 192c7b39c8..2006ad5424 100644 --- a/dts/src/arm64/actions/s700.dtsi +++ b/dts/src/arm64/actions/s700.dtsi @@ -5,6 +5,7 @@ #include <dt-bindings/clock/actions,s700-cmu.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/reset/actions,s700-reset.h> / { compatible = "actions,s700"; @@ -18,28 +19,28 @@ cpu0: cpu@0 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x0>; enable-method = "psci"; }; cpu1: cpu@1 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x1>; enable-method = "psci"; }; cpu2: cpu@2 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x2>; enable-method = "psci"; }; cpu3: cpu@3 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x3>; enable-method = "psci"; }; @@ -172,6 +173,47 @@ reg = <0x0 0xe0168000 0x0 0x1000>; clocks = <&hosc>, <&losc>; #clock-cells = <1>; + #reset-cells = <1>; + }; + + i2c0: i2c@e0170000 { + compatible = "actions,s700-i2c"; + reg = <0 0xe0170000 0 0x1000>; + clocks = <&cmu CLK_I2C0>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@e0174000 { + compatible = "actions,s700-i2c"; + reg = <0 0xe0174000 0 0x1000>; + clocks = <&cmu CLK_I2C1>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@e0178000 { + compatible = "actions,s700-i2c"; + reg = <0 0xe0178000 0 0x1000>; + clocks = <&cmu CLK_I2C2>; + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@e017c000 { + compatible = "actions,s700-i2c"; + reg = <0 0xe017c000 0 0x1000>; + clocks = <&cmu CLK_I2C3>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; }; sps: power-controller@e01b0100 { @@ -186,5 +228,21 @@ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "timer1"; }; + + pinctrl: pinctrl@e01b0000 { + compatible = "actions,s700-pinctrl"; + reg = <0x0 0xe01b0000 0x0 0x1000>; + clocks = <&cmu CLK_GPIO>; + gpio-controller; + gpio-ranges = <&pinctrl 0 0 136>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + }; }; }; diff --git a/dts/src/arm64/actions/s900.dtsi b/dts/src/arm64/actions/s900.dtsi index 491ddccc90..df3a68a3ac 100644 --- a/dts/src/arm64/actions/s900.dtsi +++ b/dts/src/arm64/actions/s900.dtsi @@ -5,6 +5,7 @@ #include <dt-bindings/clock/actions,s900-cmu.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/reset/actions,s900-reset.h> / { compatible = "actions,s900"; @@ -18,28 +19,28 @@ cpu0: cpu@0 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x0>; enable-method = "psci"; }; cpu1: cpu@1 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x1>; enable-method = "psci"; }; cpu2: cpu@2 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x2>; enable-method = "psci"; }; cpu3: cpu@3 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x3>; enable-method = "psci"; }; @@ -184,6 +185,7 @@ reg = <0x0 0xe0160000 0x0 0x1000>; clocks = <&hosc>, <&losc>; #clock-cells = <1>; + #reset-cells = <1>; }; i2c0: i2c@e0170000 { @@ -253,6 +255,14 @@ gpio-controller; gpio-ranges = <&pinctrl 0 0 146>; #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; }; timer: timer@e0228000 { diff --git a/dts/src/arm64/al/alpine-v2.dtsi b/dts/src/arm64/al/alpine-v2.dtsi index 5b7bef6842..d5e7e2bb4e 100644 --- a/dts/src/arm64/al/alpine-v2.dtsi +++ b/dts/src/arm64/al/alpine-v2.dtsi @@ -47,28 +47,28 @@ #size-cells = <0>; cpu@0 { - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; device_type = "cpu"; reg = <0x0 0x0>; enable-method = "psci"; }; cpu@1 { - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; device_type = "cpu"; reg = <0x0 0x1>; enable-method = "psci"; }; cpu@2 { - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; device_type = "cpu"; reg = <0x0 0x2>; enable-method = "psci"; }; cpu@3 { - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; device_type = "cpu"; reg = <0x0 0x3>; enable-method = "psci"; diff --git a/dts/src/arm64/allwinner/sun50i-a64-bananapi-m64.dts b/dts/src/arm64/allwinner/sun50i-a64-bananapi-m64.dts index 9d0afd7d50..7793ebb5d2 100644 --- a/dts/src/arm64/allwinner/sun50i-a64-bananapi-m64.dts +++ b/dts/src/arm64/allwinner/sun50i-a64-bananapi-m64.dts @@ -222,6 +222,14 @@ #include "axp803.dtsi" +&ac_power_supply { + status = "okay"; +}; + +&battery_power_supply { + status = "okay"; +}; + ®_aldo1 { /* * This regulator also drives the PE pingroup GPIOs, diff --git a/dts/src/arm64/allwinner/sun50i-a64-nanopi-a64.dts b/dts/src/arm64/allwinner/sun50i-a64-nanopi-a64.dts index 31884dbc88..f4e78531f6 100644 --- a/dts/src/arm64/allwinner/sun50i-a64-nanopi-a64.dts +++ b/dts/src/arm64/allwinner/sun50i-a64-nanopi-a64.dts @@ -186,6 +186,10 @@ #include "axp803.dtsi" +&ac_power_supply { + status = "okay"; +}; + ®_aldo2 { regulator-always-on; regulator-min-microvolt = <1800000>; diff --git a/dts/src/arm64/allwinner/sun50i-a64-olinuxino.dts b/dts/src/arm64/allwinner/sun50i-a64-olinuxino.dts index f7a4bccaa5..01a9a52eda 100644 --- a/dts/src/arm64/allwinner/sun50i-a64-olinuxino.dts +++ b/dts/src/arm64/allwinner/sun50i-a64-olinuxino.dts @@ -177,6 +177,14 @@ #include "axp803.dtsi" +&ac_power_supply { + status = "okay"; +}; + +&battery_power_supply { + status = "okay"; +}; + ®_aldo1 { regulator-always-on; regulator-min-microvolt = <2800000>; diff --git a/dts/src/arm64/allwinner/sun50i-a64-orangepi-win.dts b/dts/src/arm64/allwinner/sun50i-a64-orangepi-win.dts index 8974b5a1d3..510f661229 100644 --- a/dts/src/arm64/allwinner/sun50i-a64-orangepi-win.dts +++ b/dts/src/arm64/allwinner/sun50i-a64-orangepi-win.dts @@ -194,6 +194,14 @@ #include "axp803.dtsi" +&ac_power_supply { + status = "okay"; +}; + +&battery_power_supply { + status = "okay"; +}; + ®_aldo1 { regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; diff --git a/dts/src/arm64/allwinner/sun50i-a64-pine64.dts b/dts/src/arm64/allwinner/sun50i-a64-pine64.dts index 216f2f5db5..c0b9cc7a6b 100644 --- a/dts/src/arm64/allwinner/sun50i-a64-pine64.dts +++ b/dts/src/arm64/allwinner/sun50i-a64-pine64.dts @@ -169,6 +169,14 @@ #include "axp803.dtsi" +&ac_power_supply { + status = "okay"; +}; + +&battery_power_supply { + status = "okay"; +}; + ®_aldo2 { regulator-always-on; regulator-min-microvolt = <1800000>; diff --git a/dts/src/arm64/allwinner/sun50i-a64-teres-i.dts b/dts/src/arm64/allwinner/sun50i-a64-teres-i.dts index c455b24dd0..7b7b14ba58 100644 --- a/dts/src/arm64/allwinner/sun50i-a64-teres-i.dts +++ b/dts/src/arm64/allwinner/sun50i-a64-teres-i.dts @@ -145,6 +145,14 @@ #include "axp803.dtsi" +&ac_power_supply { + status = "okay"; +}; + +&battery_power_supply { + status = "okay"; +}; + ®_aldo1 { regulator-always-on; regulator-min-microvolt = <2800000>; @@ -239,7 +247,7 @@ }; /* - * The A64 chip cannot work without this regulator off, although + * The A64 chip cannot work with this regulator off, although * it seems to be only driving the AR100 core. * Maybe we don't still know well about CPUs domain. */ diff --git a/dts/src/arm64/allwinner/sun50i-a64.dtsi b/dts/src/arm64/allwinner/sun50i-a64.dtsi index 2abb335145..e628d06393 100644 --- a/dts/src/arm64/allwinner/sun50i-a64.dtsi +++ b/dts/src/arm64/allwinner/sun50i-a64.dtsi @@ -84,7 +84,7 @@ #size-cells = <0>; cpu0: cpu@0 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; device_type = "cpu"; reg = <0>; enable-method = "psci"; @@ -92,7 +92,7 @@ }; cpu1: cpu@1 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; device_type = "cpu"; reg = <1>; enable-method = "psci"; @@ -100,7 +100,7 @@ }; cpu2: cpu@2 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; device_type = "cpu"; reg = <2>; enable-method = "psci"; @@ -108,7 +108,7 @@ }; cpu3: cpu@3 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; device_type = "cpu"; reg = <3>; enable-method = "psci"; @@ -142,6 +142,15 @@ clock-output-names = "ext-osc32k"; }; + pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; + }; + psci { compatible = "arm,psci-0.2"; method = "smc"; @@ -191,6 +200,7 @@ timer { compatible = "arm,armv8-timer"; + allwinner,erratum-unknown1; interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, <GIC_PPI 14 @@ -549,6 +559,12 @@ interrupt-controller; #interrupt-cells = <3>; + csi_pins: csi-pins { + pins = "PE0", "PE2", "PE3", "PE4", "PE5", "PE6", + "PE7", "PE8", "PE9", "PE10", "PE11"; + function = "csi"; + }; + i2c0_pins: i2c0_pins { pins = "PH0", "PH1"; function = "i2c0"; @@ -916,6 +932,20 @@ status = "disabled"; }; + csi: csi@1cb0000 { + compatible = "allwinner,sun50i-a64-csi"; + reg = <0x01cb0000 0x1000>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_CSI>, + <&ccu CLK_CSI_SCLK>, + <&ccu CLK_DRAM_CSI>; + clock-names = "bus", "mod", "ram"; + resets = <&ccu RST_BUS_CSI>; + pinctrl-names = "default"; + pinctrl-0 = <&csi_pins>; + status = "disabled"; + }; + hdmi: hdmi@1ee0000 { compatible = "allwinner,sun50i-a64-dw-hdmi", "allwinner,sun8i-a83t-dw-hdmi"; diff --git a/dts/src/arm64/allwinner/sun50i-h5-libretech-all-h3-cc.dts b/dts/src/arm64/allwinner/sun50i-h5-libretech-all-h3-cc.dts index 95e113ce86..d68bdfea22 100644 --- a/dts/src/arm64/allwinner/sun50i-h5-libretech-all-h3-cc.dts +++ b/dts/src/arm64/allwinner/sun50i-h5-libretech-all-h3-cc.dts @@ -12,3 +12,7 @@ model = "Libre Computer Board ALL-H3-CC H5"; compatible = "libretech,all-h3-cc-h5", "allwinner,sun50i-h5"; }; + +&mmc2 { + mmc-ddr-3_3v; +}; diff --git a/dts/src/arm64/allwinner/sun50i-h5.dtsi b/dts/src/arm64/allwinner/sun50i-h5.dtsi index c22621b4b8..96acafd3a8 100644 --- a/dts/src/arm64/allwinner/sun50i-h5.dtsi +++ b/dts/src/arm64/allwinner/sun50i-h5.dtsi @@ -48,28 +48,28 @@ #size-cells = <0>; cpu0: cpu@0 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; device_type = "cpu"; reg = <0>; enable-method = "psci"; }; cpu@1 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; device_type = "cpu"; reg = <1>; enable-method = "psci"; }; cpu@2 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; device_type = "cpu"; reg = <2>; enable-method = "psci"; }; cpu@3 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; device_type = "cpu"; reg = <3>; enable-method = "psci"; diff --git a/dts/src/arm64/allwinner/sun50i-h6.dtsi b/dts/src/arm64/allwinner/sun50i-h6.dtsi index d93a7add67..c9e861a50a 100644 --- a/dts/src/arm64/allwinner/sun50i-h6.dtsi +++ b/dts/src/arm64/allwinner/sun50i-h6.dtsi @@ -22,28 +22,28 @@ #size-cells = <0>; cpu0: cpu@0 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; device_type = "cpu"; reg = <0>; enable-method = "psci"; }; cpu1: cpu@1 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; device_type = "cpu"; reg = <1>; enable-method = "psci"; }; cpu2: cpu@2 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; device_type = "cpu"; reg = <2>; enable-method = "psci"; }; cpu3: cpu@3 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; device_type = "cpu"; reg = <3>; enable-method = "psci"; @@ -167,6 +167,20 @@ reg = <0x0000 0x1e000>; }; }; + + sram_c1: sram@1a00000 { + compatible = "mmio-sram"; + reg = <0x01a00000 0x200000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x01a00000 0x200000>; + + ve_sram: sram-section@0 { + compatible = "allwinner,sun50i-h6-sram-c1", + "allwinner,sun4i-a10-sram-c1"; + reg = <0x000000 0x200000>; + }; + }; }; ccu: clock@3001000 { @@ -178,17 +192,6 @@ #reset-cells = <1>; }; - gic: interrupt-controller@3021000 { - compatible = "arm,gic-400"; - reg = <0x03021000 0x1000>, - <0x03022000 0x2000>, - <0x03024000 0x2000>, - <0x03026000 0x2000>; - interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; - interrupt-controller; - #interrupt-cells = <3>; - }; - pio: pinctrl@300b000 { compatible = "allwinner,sun50i-h6-pinctrl"; reg = <0x0300b000 0x400>; @@ -239,6 +242,17 @@ }; }; + gic: interrupt-controller@3021000 { + compatible = "arm,gic-400"; + reg = <0x03021000 0x1000>, + <0x03022000 0x2000>, + <0x03024000 0x2000>, + <0x03026000 0x2000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + interrupt-controller; + #interrupt-cells = <3>; + }; + mmc0: mmc@4020000 { compatible = "allwinner,sun50i-h6-mmc", "allwinner,sun50i-a64-mmc"; diff --git a/dts/src/arm64/altera/socfpga_stratix10.dtsi b/dts/src/arm64/altera/socfpga_stratix10.dtsi index b2c9bb6645..7c649f6b14 100644 --- a/dts/src/arm64/altera/socfpga_stratix10.dtsi +++ b/dts/src/arm64/altera/socfpga_stratix10.dtsi @@ -42,28 +42,28 @@ #size-cells = <0>; cpu0: cpu@0 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; device_type = "cpu"; enable-method = "psci"; reg = <0x0>; }; cpu1: cpu@1 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; device_type = "cpu"; enable-method = "psci"; reg = <0x1>; }; cpu2: cpu@2 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; device_type = "cpu"; enable-method = "psci"; reg = <0x2>; }; cpu3: cpu@3 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; device_type = "cpu"; enable-method = "psci"; reg = <0x3>; @@ -161,6 +161,7 @@ tx-fifo-depth = <16384>; rx-fifo-depth = <16384>; snps,multicast-filter-bins = <256>; + iommus = <&smmu 1>; status = "disabled"; }; @@ -177,6 +178,7 @@ tx-fifo-depth = <16384>; rx-fifo-depth = <16384>; snps,multicast-filter-bins = <256>; + iommus = <&smmu 2>; status = "disabled"; }; @@ -193,6 +195,7 @@ tx-fifo-depth = <16384>; rx-fifo-depth = <16384>; snps,multicast-filter-bins = <256>; + iommus = <&smmu 3>; status = "disabled"; }; @@ -303,6 +306,7 @@ clocks = <&clkmgr STRATIX10_L4_MP_CLK>, <&clkmgr STRATIX10_SDMMC_CLK>; clock-names = "biu", "ciu"; + iommus = <&smmu 5>; status = "disabled"; }; @@ -336,6 +340,29 @@ reg = <0xffd11000 0x1000>; }; + smmu: iommu@fa000000 { + compatible = "arm,mmu-500", "arm,smmu-v2"; + reg = <0xfa000000 0x40000>; + #global-interrupts = <2>; + #iommu-cells = <1>; + clocks = <&clkmgr STRATIX10_L4_MAIN_CLK>; + clock-names = "iommu"; + interrupt-parent = <&intc>; + interrupts = <0 128 4>, /* Global Secure Fault */ + <0 129 4>, /* Global Non-secure Fault */ + /* Non-secure Context Interrupts (32) */ + <0 138 4>, <0 139 4>, <0 140 4>, <0 141 4>, + <0 142 4>, <0 143 4>, <0 144 4>, <0 145 4>, + <0 146 4>, <0 147 4>, <0 148 4>, <0 149 4>, + <0 150 4>, <0 151 4>, <0 152 4>, <0 153 4>, + <0 154 4>, <0 155 4>, <0 156 4>, <0 157 4>, + <0 158 4>, <0 159 4>, <0 160 4>, <0 161 4>, + <0 162 4>, <0 163 4>, <0 164 4>, <0 165 4>, + <0 166 4>, <0 167 4>, <0 168 4>, <0 169 4>; + stream-match-mask = <0x7ff0>; + status = "disabled"; + }; + spi0: spi@ffda4000 { compatible = "snps,dw-apb-ssi"; #address-cells = <1>; @@ -445,6 +472,7 @@ resets = <&rst USB0_RESET>, <&rst USB0_OCP_RESET>; reset-names = "dwc2", "dwc2-ecc"; clocks = <&clkmgr STRATIX10_USB_CLK>; + iommus = <&smmu 6>; status = "disabled"; }; @@ -457,6 +485,7 @@ resets = <&rst USB1_RESET>, <&rst USB1_OCP_RESET>; reset-names = "dwc2", "dwc2-ecc"; clocks = <&clkmgr STRATIX10_USB_CLK>; + iommus = <&smmu 7>; status = "disabled"; }; diff --git a/dts/src/arm64/amlogic/meson-axg-s400.dts b/dts/src/arm64/amlogic/meson-axg-s400.dts index 824eba98db..75fe1a2c49 100644 --- a/dts/src/arm64/amlogic/meson-axg-s400.dts +++ b/dts/src/arm64/amlogic/meson-axg-s400.dts @@ -95,6 +95,13 @@ sound-name-prefix = "MIC"; }; + spdif_dir: audio-codec-4 { + #sound-dai-cells = <0>; + compatible = "linux,spdif-dir"; + status = "okay"; + sound-name-prefix = "DIR"; + }; + emmc_pwrseq: emmc-pwrseq { compatible = "mmc-pwrseq-emmc"; reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; @@ -249,6 +256,9 @@ "TODDR_A IN 2", "TDMIN_C OUT", "TODDR_B IN 2", "TDMIN_C OUT", "TODDR_C IN 2", "TDMIN_C OUT", + "TODDR_A IN 3", "SPDIFIN Capture", + "TODDR_B IN 3", "SPDIFIN Capture", + "TODDR_C IN 3", "SPDIFIN Capture", "TODDR_A IN 4", "PDM Capture", "TODDR_B IN 4", "PDM Capture", "TODDR_C IN 4", "PDM Capture", @@ -326,6 +336,14 @@ }; dai-link-8 { + sound-dai = <&spdifin>; + + codec { + sound-dai = <&spdif_dir>; + }; + }; + + dai-link-9 { sound-dai = <&pdm>; codec { @@ -446,7 +464,8 @@ bus-width = <4>; cap-sd-highspeed; - max-frequency = <100000000>; + sd-uhs-sdr104; + max-frequency = <200000000>; non-removable; disable-wp; @@ -469,9 +488,8 @@ pinctrl-names = "default", "clk-gate"; bus-width = <8>; - cap-sd-highspeed; cap-mmc-highspeed; - max-frequency = <180000000>; + max-frequency = <200000000>; non-removable; disable-wp; mmc-ddr-1_8v; @@ -483,6 +501,12 @@ vqmmc-supply = <&vddio_boot>; }; +&spdifin { + pinctrl-0 = <&spdif_in_a19_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + &spdifout { pinctrl-0 = <&spdif_out_a20_pins>; pinctrl-names = "default"; diff --git a/dts/src/arm64/amlogic/meson-axg.dtsi b/dts/src/arm64/amlogic/meson-axg.dtsi index fffd557879..34704fecf7 100644 --- a/dts/src/arm64/amlogic/meson-axg.dtsi +++ b/dts/src/arm64/amlogic/meson-axg.dtsi @@ -68,7 +68,7 @@ cpu0: cpu@0 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x0>; enable-method = "psci"; next-level-cache = <&l2>; @@ -77,7 +77,7 @@ cpu1: cpu@1 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x1>; enable-method = "psci"; next-level-cache = <&l2>; @@ -86,7 +86,7 @@ cpu2: cpu@2 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x2>; enable-method = "psci"; next-level-cache = <&l2>; @@ -95,7 +95,7 @@ cpu3: cpu@3 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x3>; enable-method = "psci"; next-level-cache = <&l2>; @@ -111,6 +111,14 @@ compatible = "amlogic,meson-gxbb-sm"; }; + efuse: efuse { + compatible = "amlogic,meson-gxbb-efuse"; + clocks = <&clkc CLKID_EFUSE>; + #address-cells = <1>; + #size-cells = <1>; + read-only; + }; + psci { compatible = "arm,psci-1.0"; method = "smc"; @@ -1260,6 +1268,18 @@ status = "disabled"; }; + spdifin: audio-controller@400 { + compatible = "amlogic,axg-spdifin"; + reg = <0x0 0x400 0x0 0x30>; + #sound-dai-cells = <0>; + sound-name-prefix = "SPDIFIN"; + interrupts = <GIC_SPI 87 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_SPDIFIN>, + <&clkc_audio AUD_CLKID_SPDIFIN_CLK>; + clock-names = "pclk", "refclk"; + status = "disabled"; + }; + spdifout: audio-controller@480 { compatible = "amlogic,axg-spdifout"; reg = <0x0 0x480 0x0 0x50>; @@ -1590,6 +1610,11 @@ status = "disabled"; }; + clk_msr: clock-measure@18000 { + compatible = "amlogic,meson-axg-clk-measure"; + reg = <0x0 0x18000 0x0 0x10>; + }; + i2c3: i2c@1c000 { compatible = "amlogic,meson-axg-i2c"; reg = <0x0 0x1c000 0x0 0x20>; diff --git a/dts/src/arm64/amlogic/meson-g12a-x96-max.dts b/dts/src/arm64/amlogic/meson-g12a-x96-max.dts new file mode 100644 index 0000000000..c62d3d5706 --- /dev/null +++ b/dts/src/arm64/amlogic/meson-g12a-x96-max.dts @@ -0,0 +1,28 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2018 BayLibre SAS. All rights reserved. + */ + +/dts-v1/; + +#include "meson-g12a.dtsi" + +/ { + compatible = "amediatech,x96-max", "amlogic,u200", "amlogic,g12a"; + model = "Shenzhen Amediatech Technology Co., Ltd X96 Max"; + + aliases { + serial0 = &uart_AO; + }; + chosen { + stdout-path = "serial0:115200n8"; + }; + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x40000000>; + }; +}; + +&uart_AO { + status = "okay"; +}; diff --git a/dts/src/arm64/amlogic/meson-g12a.dtsi b/dts/src/arm64/amlogic/meson-g12a.dtsi index 3b82a975c6..17c6217f8a 100644 --- a/dts/src/arm64/amlogic/meson-g12a.dtsi +++ b/dts/src/arm64/amlogic/meson-g12a.dtsi @@ -20,7 +20,7 @@ cpu0: cpu@0 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x0>; enable-method = "psci"; next-level-cache = <&l2>; @@ -28,7 +28,7 @@ cpu1: cpu@1 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x1>; enable-method = "psci"; next-level-cache = <&l2>; @@ -36,7 +36,7 @@ cpu2: cpu@2 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x2>; enable-method = "psci"; next-level-cache = <&l2>; @@ -44,7 +44,7 @@ cpu3: cpu@3 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x3>; enable-method = "psci"; next-level-cache = <&l2>; @@ -78,20 +78,41 @@ #size-cells = <2>; ranges; - periphs: periphs@ff634000 { + apb: bus@ff600000 { compatible = "simple-bus"; - reg = <0x0 0xff634000 0x0 0x2000>; + reg = <0x0 0xff600000 0x0 0x200000>; #address-cells = <2>; #size-cells = <2>; - ranges = <0x0 0x0 0x0 0xff634000 0x0 0x2000>; - }; + ranges = <0x0 0x0 0x0 0xff600000 0x0 0x200000>; + + periphs: bus@34400 { + compatible = "simple-bus"; + reg = <0x0 0x34400 0x0 0x400>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0x34400 0x0 0x400>; + }; - hiubus: bus@ff63c000 { - compatible = "simple-bus"; - reg = <0x0 0xff63c000 0x0 0x1c00>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x0 0x0 0xff63c000 0x0 0x1c00>; + hiu: bus@3c000 { + compatible = "simple-bus"; + reg = <0x0 0x3c000 0x0 0x1400>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0x3c000 0x0 0x1400>; + + hhi: system-controller@0 { + compatible = "amlogic,meson-gx-hhi-sysctrl", + "simple-mfd", "syscon"; + reg = <0 0 0 0x400>; + + clkc: clock-controller { + compatible = "amlogic,g12a-clkc"; + #clock-cells = <1>; + clocks = <&xtal>; + clock-names = "xtal"; + }; + }; + }; }; aobus: bus@ff800000 { @@ -102,7 +123,8 @@ ranges = <0x0 0x0 0x0 0xff800000 0x0 0x100000>; uart_AO: serial@3000 { - compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart"; + compatible = "amlogic,meson-gx-uart", + "amlogic,meson-ao-uart"; reg = <0x0 0x3000 0x0 0x18>; interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>; clocks = <&xtal>, <&xtal>, <&xtal>; @@ -111,7 +133,8 @@ }; uart_AO_B: serial@4000 { - compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart"; + compatible = "amlogic,meson-gx-uart", + "amlogic,meson-ao-uart"; reg = <0x0 0x4000 0x0 0x18>; interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>; clocks = <&xtal>, <&xtal>, <&xtal>; @@ -135,18 +158,15 @@ cbus: bus@ffd00000 { compatible = "simple-bus"; - reg = <0x0 0xffd00000 0x0 0x25000>; + reg = <0x0 0xffd00000 0x0 0x100000>; #address-cells = <2>; #size-cells = <2>; - ranges = <0x0 0x0 0x0 0xffd00000 0x0 0x25000>; - }; + ranges = <0x0 0x0 0x0 0xffd00000 0x0 0x100000>; - apb: apb@ffe00000 { - compatible = "simple-bus"; - reg = <0x0 0xffe00000 0x0 0x200000>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x0 0x0 0xffe00000 0x0 0x200000>; + clk_msr: clock-measure@18000 { + compatible = "amlogic,meson-g12a-clk-measure"; + reg = <0x0 0x18000 0x0 0x10>; + }; }; }; diff --git a/dts/src/arm64/amlogic/meson-gx.dtsi b/dts/src/arm64/amlogic/meson-gx.dtsi index 44c5c51ff1..6772709b9e 100644 --- a/dts/src/arm64/amlogic/meson-gx.dtsi +++ b/dts/src/arm64/amlogic/meson-gx.dtsi @@ -50,13 +50,35 @@ }; }; + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + simplefb_cvbs: framebuffer-cvbs { + compatible = "amlogic,simple-framebuffer", + "simple-framebuffer"; + amlogic,pipeline = "vpu-cvbs"; + power-domains = <&pwrc_vpu>; + status = "disabled"; + }; + + simplefb_hdmi: framebuffer-hdmi { + compatible = "amlogic,simple-framebuffer", + "simple-framebuffer"; + amlogic,pipeline = "vpu-hdmi"; + power-domains = <&pwrc_vpu>; + status = "disabled"; + }; + }; + cpus { #address-cells = <0x2>; #size-cells = <0x0>; cpu0: cpu@0 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x0>; enable-method = "psci"; next-level-cache = <&l2>; @@ -65,7 +87,7 @@ cpu1: cpu@1 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x1>; enable-method = "psci"; next-level-cache = <&l2>; @@ -74,7 +96,7 @@ cpu2: cpu@2 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x2>; enable-method = "psci"; next-level-cache = <&l2>; @@ -83,7 +105,7 @@ cpu3: cpu@3 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x3>; enable-method = "psci"; next-level-cache = <&l2>; @@ -510,6 +532,7 @@ interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>; #address-cells = <1>; #size-cells = <0>; + amlogic,canvas = <&canvas>; /* CVBS VDAC output port */ cvbs_vdac_port: port@0 { diff --git a/dts/src/arm64/amlogic/meson-gxbb.dtsi b/dts/src/arm64/amlogic/meson-gxbb.dtsi index a7b883ced0..a60d3652be 100644 --- a/dts/src/arm64/amlogic/meson-gxbb.dtsi +++ b/dts/src/arm64/amlogic/meson-gxbb.dtsi @@ -784,6 +784,12 @@ resets = <&reset RESET_SD_EMMC_C>; }; +&simplefb_hdmi { + clocks = <&clkc CLKID_HDMI_PCLK>, + <&clkc CLKID_CLK81>, + <&clkc CLKID_GCLK_VENCI_INT0>; +}; + &spicc { clocks = <&clkc CLKID_SPICC>; clock-names = "core"; diff --git a/dts/src/arm64/amlogic/meson-gxl.dtsi b/dts/src/arm64/amlogic/meson-gxl.dtsi index d5c3d78aaf..3093ae421b 100644 --- a/dts/src/arm64/amlogic/meson-gxl.dtsi +++ b/dts/src/arm64/amlogic/meson-gxl.dtsi @@ -787,6 +787,12 @@ resets = <&reset RESET_SD_EMMC_C>; }; +&simplefb_hdmi { + clocks = <&clkc CLKID_HDMI_PCLK>, + <&clkc CLKID_CLK81>, + <&clkc CLKID_GCLK_VENCI_INT0>; +}; + &spicc { clocks = <&clkc CLKID_SPICC>; clock-names = "core"; diff --git a/dts/src/arm64/amlogic/meson-gxm.dtsi b/dts/src/arm64/amlogic/meson-gxm.dtsi index 247888d68a..ed3a3d5adf 100644 --- a/dts/src/arm64/amlogic/meson-gxm.dtsi +++ b/dts/src/arm64/amlogic/meson-gxm.dtsi @@ -44,7 +44,7 @@ cpu4: cpu@100 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x100>; enable-method = "psci"; next-level-cache = <&l2>; @@ -53,7 +53,7 @@ cpu5: cpu@101 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x101>; enable-method = "psci"; next-level-cache = <&l2>; @@ -62,7 +62,7 @@ cpu6: cpu@102 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x102>; enable-method = "psci"; next-level-cache = <&l2>; @@ -71,7 +71,7 @@ cpu7: cpu@103 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x103>; enable-method = "psci"; next-level-cache = <&l2>; diff --git a/dts/src/arm64/apm/apm-shadowcat.dtsi b/dts/src/arm64/apm/apm-shadowcat.dtsi index d8ecd16614..7faea28a37 100644 --- a/dts/src/arm64/apm/apm-shadowcat.dtsi +++ b/dts/src/arm64/apm/apm-shadowcat.dtsi @@ -21,7 +21,7 @@ cpu@0 { device_type = "cpu"; - compatible = "apm,strega", "arm,armv8"; + compatible = "apm,strega"; reg = <0x0 0x000>; enable-method = "spin-table"; cpu-release-addr = <0x1 0x0000fff8>; @@ -31,7 +31,7 @@ }; cpu@1 { device_type = "cpu"; - compatible = "apm,strega", "arm,armv8"; + compatible = "apm,strega"; reg = <0x0 0x001>; enable-method = "spin-table"; cpu-release-addr = <0x1 0x0000fff8>; @@ -41,7 +41,7 @@ }; cpu@100 { device_type = "cpu"; - compatible = "apm,strega", "arm,armv8"; + compatible = "apm,strega"; reg = <0x0 0x100>; enable-method = "spin-table"; cpu-release-addr = <0x1 0x0000fff8>; @@ -51,7 +51,7 @@ }; cpu@101 { device_type = "cpu"; - compatible = "apm,strega", "arm,armv8"; + compatible = "apm,strega"; reg = <0x0 0x101>; enable-method = "spin-table"; cpu-release-addr = <0x1 0x0000fff8>; @@ -61,7 +61,7 @@ }; cpu@200 { device_type = "cpu"; - compatible = "apm,strega", "arm,armv8"; + compatible = "apm,strega"; reg = <0x0 0x200>; enable-method = "spin-table"; cpu-release-addr = <0x1 0x0000fff8>; @@ -71,7 +71,7 @@ }; cpu@201 { device_type = "cpu"; - compatible = "apm,strega", "arm,armv8"; + compatible = "apm,strega"; reg = <0x0 0x201>; enable-method = "spin-table"; cpu-release-addr = <0x1 0x0000fff8>; @@ -81,7 +81,7 @@ }; cpu@300 { device_type = "cpu"; - compatible = "apm,strega", "arm,armv8"; + compatible = "apm,strega"; reg = <0x0 0x300>; enable-method = "spin-table"; cpu-release-addr = <0x1 0x0000fff8>; @@ -91,7 +91,7 @@ }; cpu@301 { device_type = "cpu"; - compatible = "apm,strega", "arm,armv8"; + compatible = "apm,strega"; reg = <0x0 0x301>; enable-method = "spin-table"; cpu-release-addr = <0x1 0x0000fff8>; diff --git a/dts/src/arm64/apm/apm-storm.dtsi b/dts/src/arm64/apm/apm-storm.dtsi index 00e82b8e9a..94d637d172 100644 --- a/dts/src/arm64/apm/apm-storm.dtsi +++ b/dts/src/arm64/apm/apm-storm.dtsi @@ -21,7 +21,7 @@ cpu@0 { device_type = "cpu"; - compatible = "apm,potenza", "arm,armv8"; + compatible = "apm,potenza"; reg = <0x0 0x000>; enable-method = "spin-table"; cpu-release-addr = <0x1 0x0000fff8>; @@ -29,7 +29,7 @@ }; cpu@1 { device_type = "cpu"; - compatible = "apm,potenza", "arm,armv8"; + compatible = "apm,potenza"; reg = <0x0 0x001>; enable-method = "spin-table"; cpu-release-addr = <0x1 0x0000fff8>; @@ -37,7 +37,7 @@ }; cpu@100 { device_type = "cpu"; - compatible = "apm,potenza", "arm,armv8"; + compatible = "apm,potenza"; reg = <0x0 0x100>; enable-method = "spin-table"; cpu-release-addr = <0x1 0x0000fff8>; @@ -45,7 +45,7 @@ }; cpu@101 { device_type = "cpu"; - compatible = "apm,potenza", "arm,armv8"; + compatible = "apm,potenza"; reg = <0x0 0x101>; enable-method = "spin-table"; cpu-release-addr = <0x1 0x0000fff8>; @@ -53,7 +53,7 @@ }; cpu@200 { device_type = "cpu"; - compatible = "apm,potenza", "arm,armv8"; + compatible = "apm,potenza"; reg = <0x0 0x200>; enable-method = "spin-table"; cpu-release-addr = <0x1 0x0000fff8>; @@ -61,7 +61,7 @@ }; cpu@201 { device_type = "cpu"; - compatible = "apm,potenza", "arm,armv8"; + compatible = "apm,potenza"; reg = <0x0 0x201>; enable-method = "spin-table"; cpu-release-addr = <0x1 0x0000fff8>; @@ -69,7 +69,7 @@ }; cpu@300 { device_type = "cpu"; - compatible = "apm,potenza", "arm,armv8"; + compatible = "apm,potenza"; reg = <0x0 0x300>; enable-method = "spin-table"; cpu-release-addr = <0x1 0x0000fff8>; @@ -77,7 +77,7 @@ }; cpu@301 { device_type = "cpu"; - compatible = "apm,potenza", "arm,armv8"; + compatible = "apm,potenza"; reg = <0x0 0x301>; enable-method = "spin-table"; cpu-release-addr = <0x1 0x0000fff8>; diff --git a/dts/src/arm64/arm/foundation-v8-gicv2.dtsi b/dts/src/arm64/arm/foundation-v8-gicv2.dtsi index 851abf34fc..15fe81738e 100644 --- a/dts/src/arm64/arm/foundation-v8-gicv2.dtsi +++ b/dts/src/arm64/arm/foundation-v8-gicv2.dtsi @@ -14,6 +14,6 @@ <0x0 0x2c002000 0 0x2000>, <0x0 0x2c004000 0 0x2000>, <0x0 0x2c006000 0 0x2000>; - interrupts = <1 9 0xf04>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; }; }; diff --git a/dts/src/arm64/arm/foundation-v8-gicv3.dtsi b/dts/src/arm64/arm/foundation-v8-gicv3.dtsi index 91fc5c60d8..f2c75c7560 100644 --- a/dts/src/arm64/arm/foundation-v8-gicv3.dtsi +++ b/dts/src/arm64/arm/foundation-v8-gicv3.dtsi @@ -17,7 +17,7 @@ <0x0 0x2c000000 0x0 0x2000>, <0x0 0x2c010000 0x0 0x2000>, <0x0 0x2c02f000 0x0 0x2000>; - interrupts = <1 9 4>; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; its: its@2f020000 { compatible = "arm,gic-v3-its"; diff --git a/dts/src/arm64/arm/foundation-v8.dtsi b/dts/src/arm64/arm/foundation-v8.dtsi index e080277d27..3f78373f70 100644 --- a/dts/src/arm64/arm/foundation-v8.dtsi +++ b/dts/src/arm64/arm/foundation-v8.dtsi @@ -7,6 +7,8 @@ /dts-v1/; +#include <dt-bindings/interrupt-controller/arm-gic.h> + /memreserve/ 0x80000000 0x00010000; / { @@ -67,26 +69,26 @@ timer { compatible = "arm,armv8-timer"; - interrupts = <1 13 0xf08>, - <1 14 0xf08>, - <1 11 0xf08>, - <1 10 0xf08>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; clock-frequency = <100000000>; }; pmu { compatible = "arm,armv8-pmuv3"; - interrupts = <0 60 4>, - <0 61 4>, - <0 62 4>, - <0 63 4>; + interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; }; watchdog@2a440000 { compatible = "arm,sbsa-gwdt"; reg = <0x0 0x2a440000 0 0x1000>, <0x0 0x2a450000 0 0x1000>; - interrupts = <0 27 4>; + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; timeout-sec = <30>; }; @@ -105,49 +107,49 @@ #interrupt-cells = <1>; interrupt-map-mask = <0 0 63>; - interrupt-map = <0 0 0 &gic 0 0 0 0 4>, - <0 0 1 &gic 0 0 0 1 4>, - <0 0 2 &gic 0 0 0 2 4>, - <0 0 3 &gic 0 0 0 3 4>, - <0 0 4 &gic 0 0 0 4 4>, - <0 0 5 &gic 0 0 0 5 4>, - <0 0 6 &gic 0 0 0 6 4>, - <0 0 7 &gic 0 0 0 7 4>, - <0 0 8 &gic 0 0 0 8 4>, - <0 0 9 &gic 0 0 0 9 4>, - <0 0 10 &gic 0 0 0 10 4>, - <0 0 11 &gic 0 0 0 11 4>, - <0 0 12 &gic 0 0 0 12 4>, - <0 0 13 &gic 0 0 0 13 4>, - <0 0 14 &gic 0 0 0 14 4>, - <0 0 15 &gic 0 0 0 15 4>, - <0 0 16 &gic 0 0 0 16 4>, - <0 0 17 &gic 0 0 0 17 4>, - <0 0 18 &gic 0 0 0 18 4>, - <0 0 19 &gic 0 0 0 19 4>, - <0 0 20 &gic 0 0 0 20 4>, - <0 0 21 &gic 0 0 0 21 4>, - <0 0 22 &gic 0 0 0 22 4>, - <0 0 23 &gic 0 0 0 23 4>, - <0 0 24 &gic 0 0 0 24 4>, - <0 0 25 &gic 0 0 0 25 4>, - <0 0 26 &gic 0 0 0 26 4>, - <0 0 27 &gic 0 0 0 27 4>, - <0 0 28 &gic 0 0 0 28 4>, - <0 0 29 &gic 0 0 0 29 4>, - <0 0 30 &gic 0 0 0 30 4>, - <0 0 31 &gic 0 0 0 31 4>, - <0 0 32 &gic 0 0 0 32 4>, - <0 0 33 &gic 0 0 0 33 4>, - <0 0 34 &gic 0 0 0 34 4>, - <0 0 35 &gic 0 0 0 35 4>, - <0 0 36 &gic 0 0 0 36 4>, - <0 0 37 &gic 0 0 0 37 4>, - <0 0 38 &gic 0 0 0 38 4>, - <0 0 39 &gic 0 0 0 39 4>, - <0 0 40 &gic 0 0 0 40 4>, - <0 0 41 &gic 0 0 0 41 4>, - <0 0 42 &gic 0 0 0 42 4>; + interrupt-map = <0 0 0 &gic 0 0 GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <0 0 1 &gic 0 0 GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <0 0 2 &gic 0 0 GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <0 0 3 &gic 0 0 GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <0 0 4 &gic 0 0 GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <0 0 5 &gic 0 0 GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, + <0 0 6 &gic 0 0 GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <0 0 7 &gic 0 0 GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <0 0 8 &gic 0 0 GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <0 0 9 &gic 0 0 GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <0 0 10 &gic 0 0 GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, + <0 0 11 &gic 0 0 GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, + <0 0 12 &gic 0 0 GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <0 0 13 &gic 0 0 GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + <0 0 14 &gic 0 0 GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, + <0 0 15 &gic 0 0 GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, + <0 0 16 &gic 0 0 GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, + <0 0 17 &gic 0 0 GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, + <0 0 18 &gic 0 0 GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, + <0 0 19 &gic 0 0 GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, + <0 0 20 &gic 0 0 GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>, + <0 0 21 &gic 0 0 GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, + <0 0 22 &gic 0 0 GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>, + <0 0 23 &gic 0 0 GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>, + <0 0 24 &gic 0 0 GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>, + <0 0 25 &gic 0 0 GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>, + <0 0 26 &gic 0 0 GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>, + <0 0 27 &gic 0 0 GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>, + <0 0 28 &gic 0 0 GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>, + <0 0 29 &gic 0 0 GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>, + <0 0 30 &gic 0 0 GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>, + <0 0 31 &gic 0 0 GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>, + <0 0 32 &gic 0 0 GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <0 0 33 &gic 0 0 GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>, + <0 0 34 &gic 0 0 GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>, + <0 0 35 &gic 0 0 GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>, + <0 0 36 &gic 0 0 GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, + <0 0 37 &gic 0 0 GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, + <0 0 38 &gic 0 0 GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, + <0 0 39 &gic 0 0 GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, + <0 0 40 &gic 0 0 GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, + <0 0 41 &gic 0 0 GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, + <0 0 42 &gic 0 0 GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; ethernet@2,02000000 { compatible = "smsc,lan91c111"; diff --git a/dts/src/arm64/arm/fvp-base-revc.dts b/dts/src/arm64/arm/fvp-base-revc.dts new file mode 100644 index 0000000000..687707020e --- /dev/null +++ b/dts/src/arm64/arm/fvp-base-revc.dts @@ -0,0 +1,277 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * ARM Ltd. Fast Models + * + * Architecture Envelope Model (AEM) ARMv8-A + * ARMAEMv8AMPCT + * + * FVP Base RevC + */ + +/dts-v1/; + +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/memreserve/ 0x80000000 0x00010000; + +#include "rtsm_ve-motherboard.dtsi" +#include "rtsm_ve-motherboard-rs2.dtsi" + +/ { + model = "FVP Base RevC"; + compatible = "arm,fvp-base-revc", "arm,vexpress"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + chosen { }; + + aliases { + serial0 = &v2m_serial0; + serial1 = &v2m_serial1; + serial2 = &v2m_serial2; + serial3 = &v2m_serial3; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x000>; + enable-method = "psci"; + }; + cpu1: cpu@100 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x100>; + enable-method = "psci"; + }; + cpu2: cpu@200 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x200>; + enable-method = "psci"; + }; + cpu3: cpu@300 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x300>; + enable-method = "psci"; + }; + cpu4: cpu@10000 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x10000>; + enable-method = "psci"; + }; + cpu5: cpu@10100 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x10100>; + enable-method = "psci"; + }; + cpu6: cpu@10200 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x10200>; + enable-method = "psci"; + }; + cpu7: cpu@10300 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x10300>; + enable-method = "psci"; + }; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x00000000 0x80000000 0 0x80000000>, + <0x00000008 0x80000000 0 0x80000000>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* Chipselect 2,00000000 is physically at 0x18000000 */ + vram: vram@18000000 { + /* 8 MB of designated video RAM */ + compatible = "shared-dma-pool"; + reg = <0x00000000 0x18000000 0 0x00800000>; + no-map; + }; + }; + + gic: interrupt-controller@2f000000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <3>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + interrupt-controller; + reg = <0x0 0x2f000000 0 0x10000>, // GICD + <0x0 0x2f100000 0 0x200000>, // GICR + <0x0 0x2c000000 0 0x2000>, // GICC + <0x0 0x2c010000 0 0x2000>, // GICH + <0x0 0x2c02f000 0 0x2000>; // GICV + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + + its: its@2f020000 { + #msi-cells = <1>; + compatible = "arm,gic-v3-its"; + reg = <0x0 0x2f020000 0x0 0x20000>; // GITS + msi-controller; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; + }; + + spe-pmu { + compatible = "arm,statistical-profiling-extension-v1"; + interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_HIGH>; + }; + + pci: pci@40000000 { + #address-cells = <0x3>; + #size-cells = <0x2>; + #interrupt-cells = <0x1>; + compatible = "pci-host-ecam-generic"; + device_type = "pci"; + bus-range = <0x0 0x1>; + reg = <0x0 0x40000000 0x0 0x10000000>; + ranges = <0x2000000 0x0 0x50000000 0x0 0x50000000 0x0 0x10000000>; + interrupt-map = <0 0 0 1 &gic GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &gic GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &gic GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &gic GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + msi-map = <0x0 &its 0x0 0x10000>; + iommu-map = <0x0 &smmu 0x0 0x10000>; + + dma-coherent; + }; + + smmu: smmu@2b400000 { + compatible = "arm,smmu-v3"; + reg = <0x0 0x2b400000 0x0 0x100000>; + interrupts = <GIC_SPI 74 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 77 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 79 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "eventq", "priq", "cmdq-sync", "gerror"; + dma-coherent; + #iommu-cells = <1>; + msi-parent = <&its 0x10000>; + }; + + panel { + compatible = "arm,rtsm-display", "panel-dpi"; + port { + panel_in: endpoint { + remote-endpoint = <&clcd_pads>; + }; + }; + + panel-timing { + clock-frequency = <63500127>; + hactive = <1024>; + hback-porch = <152>; + hfront-porch = <48>; + hsync-len = <104>; + vactive = <768>; + vback-porch = <23>; + vfront-porch = <3>; + vsync-len = <4>; + }; + }; + + smb@8000000 { + compatible = "simple-bus"; + + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0 0x08000000 0x04000000>, + <1 0 0 0x14000000 0x04000000>, + <2 0 0 0x18000000 0x04000000>, + <3 0 0 0x1c000000 0x04000000>, + <4 0 0 0x0c000000 0x04000000>, + <5 0 0 0x10000000 0x04000000>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 63>; + interrupt-map = <0 0 0 &gic 0 0 GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <0 0 1 &gic 0 0 GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <0 0 2 &gic 0 0 GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <0 0 3 &gic 0 0 GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <0 0 4 &gic 0 0 GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <0 0 5 &gic 0 0 GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, + <0 0 6 &gic 0 0 GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <0 0 7 &gic 0 0 GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <0 0 8 &gic 0 0 GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <0 0 9 &gic 0 0 GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <0 0 10 &gic 0 0 GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, + <0 0 11 &gic 0 0 GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, + <0 0 12 &gic 0 0 GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <0 0 13 &gic 0 0 GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + <0 0 14 &gic 0 0 GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, + <0 0 15 &gic 0 0 GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, + <0 0 16 &gic 0 0 GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, + <0 0 17 &gic 0 0 GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, + <0 0 18 &gic 0 0 GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, + <0 0 19 &gic 0 0 GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, + <0 0 20 &gic 0 0 GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>, + <0 0 21 &gic 0 0 GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, + <0 0 22 &gic 0 0 GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>, + <0 0 23 &gic 0 0 GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>, + <0 0 24 &gic 0 0 GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>, + <0 0 25 &gic 0 0 GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>, + <0 0 26 &gic 0 0 GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>, + <0 0 27 &gic 0 0 GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>, + <0 0 28 &gic 0 0 GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>, + <0 0 29 &gic 0 0 GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>, + <0 0 30 &gic 0 0 GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>, + <0 0 31 &gic 0 0 GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>, + <0 0 32 &gic 0 0 GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <0 0 33 &gic 0 0 GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>, + <0 0 34 &gic 0 0 GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>, + <0 0 35 &gic 0 0 GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>, + <0 0 36 &gic 0 0 GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, + <0 0 37 &gic 0 0 GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, + <0 0 38 &gic 0 0 GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, + <0 0 39 &gic 0 0 GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, + <0 0 40 &gic 0 0 GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, + <0 0 41 &gic 0 0 GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, + <0 0 42 &gic 0 0 GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, + <0 0 43 &gic 0 0 GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, + <0 0 44 &gic 0 0 GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; + + motherboard { + iofpga@3,00000000 { + clcd@1f0000 { + max-memory-bandwidth = <130000000>; /* 16bpp @ 63.5MHz */ + }; + }; + }; + }; +}; diff --git a/dts/src/arm64/arm/juno-base.dtsi b/dts/src/arm64/arm/juno-base.dtsi index ed774ee8f6..7446e0dc15 100644 --- a/dts/src/arm64/arm/juno-base.dtsi +++ b/dts/src/arm64/arm/juno-base.dtsi @@ -18,7 +18,7 @@ status = "disabled"; frame@2a830000 { frame-number = <1>; - interrupts = <0 60 4>; + interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; reg = <0x0 0x2a830000 0x0 0x10000>; }; }; @@ -220,6 +220,41 @@ }; }; + replicator@20120000 { + compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; + reg = <0 0x20120000 0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; + + out-ports { + #address-cells = <1>; + #size-cells = <0>; + + /* replicator output ports */ + port@0 { + reg = <0>; + replicator_out_port0: endpoint { + remote-endpoint = <&tpiu_in_port>; + }; + }; + + port@1 { + reg = <1>; + replicator_out_port1: endpoint { + remote-endpoint = <&etr_in_port>; + }; + }; + }; + in-ports { + port { + replicator_in_port0: endpoint { + }; + }; + }; + }; + cpu_debug0: cpu-debug@22010000 { compatible = "arm,coresight-cpu-debug", "arm,primecell"; reg = <0x0 0x22010000 0x0 0x1000>; @@ -452,41 +487,6 @@ }; }; - replicator@20120000 { - compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; - reg = <0 0x20120000 0 0x1000>; - - clocks = <&soc_smc50mhz>; - clock-names = "apb_pclk"; - power-domains = <&scpi_devpd 0>; - - out-ports { - #address-cells = <1>; - #size-cells = <0>; - - /* replicator output ports */ - port@0 { - reg = <0>; - replicator_out_port0: endpoint { - remote-endpoint = <&tpiu_in_port>; - }; - }; - - port@1 { - reg = <1>; - replicator_out_port1: endpoint { - remote-endpoint = <&etr_in_port>; - }; - }; - }; - in-ports { - port { - replicator_in_port0: endpoint { - }; - }; - }; - }; - sram: sram@2e000000 { compatible = "arm,juno-sram-ns", "mmio-sram"; reg = <0x0 0x2e000000 0x0 0x8000>; @@ -520,10 +520,10 @@ <0x42000000 0x40 0x00000000 0x40 0x00000000 0x1 0x00000000>; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 7>; - interrupt-map = <0 0 0 1 &gic 0 0 0 136 4>, - <0 0 0 2 &gic 0 0 0 137 4>, - <0 0 0 3 &gic 0 0 0 138 4>, - <0 0 0 4 &gic 0 0 0 139 4>; + interrupt-map = <0 0 0 1 &gic 0 0 GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &gic 0 0 GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &gic 0 0 GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &gic 0 0 GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; msi-parent = <&v2m_0>; status = "disabled"; iommu-map-mask = <0x0>; /* RC has no means to output PCI RID */ @@ -787,19 +787,19 @@ #interrupt-cells = <1>; interrupt-map-mask = <0 0 15>; - interrupt-map = <0 0 0 &gic 0 0 0 68 IRQ_TYPE_LEVEL_HIGH>, - <0 0 1 &gic 0 0 0 69 IRQ_TYPE_LEVEL_HIGH>, - <0 0 2 &gic 0 0 0 70 IRQ_TYPE_LEVEL_HIGH>, - <0 0 3 &gic 0 0 0 160 IRQ_TYPE_LEVEL_HIGH>, - <0 0 4 &gic 0 0 0 161 IRQ_TYPE_LEVEL_HIGH>, - <0 0 5 &gic 0 0 0 162 IRQ_TYPE_LEVEL_HIGH>, - <0 0 6 &gic 0 0 0 163 IRQ_TYPE_LEVEL_HIGH>, - <0 0 7 &gic 0 0 0 164 IRQ_TYPE_LEVEL_HIGH>, - <0 0 8 &gic 0 0 0 165 IRQ_TYPE_LEVEL_HIGH>, - <0 0 9 &gic 0 0 0 166 IRQ_TYPE_LEVEL_HIGH>, - <0 0 10 &gic 0 0 0 167 IRQ_TYPE_LEVEL_HIGH>, - <0 0 11 &gic 0 0 0 168 IRQ_TYPE_LEVEL_HIGH>, - <0 0 12 &gic 0 0 0 169 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map = <0 0 0 &gic 0 0 GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, + <0 0 1 &gic 0 0 GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>, + <0 0 2 &gic 0 0 GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, + <0 0 3 &gic 0 0 GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, + <0 0 4 &gic 0 0 GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>, + <0 0 5 &gic 0 0 GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>, + <0 0 6 &gic 0 0 GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>, + <0 0 7 &gic 0 0 GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>, + <0 0 8 &gic 0 0 GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>, + <0 0 9 &gic 0 0 GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>, + <0 0 10 &gic 0 0 GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>, + <0 0 11 &gic 0 0 GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>, + <0 0 12 &gic 0 0 GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; }; site2: tlx@60000000 { @@ -809,6 +809,6 @@ ranges = <0 0 0x60000000 0x10000000>; #interrupt-cells = <1>; interrupt-map-mask = <0 0>; - interrupt-map = <0 0 &gic 0 0 0 168 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map = <0 0 &gic 0 0 GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; }; }; diff --git a/dts/src/arm64/arm/juno-r1.dts b/dts/src/arm64/arm/juno-r1.dts index b2b7ced633..5f290090b0 100644 --- a/dts/src/arm64/arm/juno-r1.dts +++ b/dts/src/arm64/arm/juno-r1.dts @@ -85,7 +85,7 @@ }; A57_0: cpu@0 { - compatible = "arm,cortex-a57","arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0x0 0x0>; device_type = "cpu"; enable-method = "psci"; @@ -102,7 +102,7 @@ }; A57_1: cpu@1 { - compatible = "arm,cortex-a57","arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0x0 0x1>; device_type = "cpu"; enable-method = "psci"; @@ -119,7 +119,7 @@ }; A53_0: cpu@100 { - compatible = "arm,cortex-a53","arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x100>; device_type = "cpu"; enable-method = "psci"; @@ -136,7 +136,7 @@ }; A53_1: cpu@101 { - compatible = "arm,cortex-a53","arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x101>; device_type = "cpu"; enable-method = "psci"; @@ -153,7 +153,7 @@ }; A53_2: cpu@102 { - compatible = "arm,cortex-a53","arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x102>; device_type = "cpu"; enable-method = "psci"; @@ -170,7 +170,7 @@ }; A53_3: cpu@103 { - compatible = "arm,cortex-a53","arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x103>; device_type = "cpu"; enable-method = "psci"; diff --git a/dts/src/arm64/arm/juno-r2.dts b/dts/src/arm64/arm/juno-r2.dts index ab77adb4f3..305300dd52 100644 --- a/dts/src/arm64/arm/juno-r2.dts +++ b/dts/src/arm64/arm/juno-r2.dts @@ -85,7 +85,7 @@ }; A72_0: cpu@0 { - compatible = "arm,cortex-a72","arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x0 0x0>; device_type = "cpu"; enable-method = "psci"; @@ -99,10 +99,11 @@ clocks = <&scpi_dvfs 0>; cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <450>; }; A72_1: cpu@1 { - compatible = "arm,cortex-a72","arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x0 0x1>; device_type = "cpu"; enable-method = "psci"; @@ -116,10 +117,11 @@ clocks = <&scpi_dvfs 0>; cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <450>; }; A53_0: cpu@100 { - compatible = "arm,cortex-a53","arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x100>; device_type = "cpu"; enable-method = "psci"; @@ -133,10 +135,11 @@ clocks = <&scpi_dvfs 1>; cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; capacity-dmips-mhz = <485>; + dynamic-power-coefficient = <140>; }; A53_1: cpu@101 { - compatible = "arm,cortex-a53","arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x101>; device_type = "cpu"; enable-method = "psci"; @@ -150,10 +153,11 @@ clocks = <&scpi_dvfs 1>; cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; capacity-dmips-mhz = <485>; + dynamic-power-coefficient = <140>; }; A53_2: cpu@102 { - compatible = "arm,cortex-a53","arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x102>; device_type = "cpu"; enable-method = "psci"; @@ -167,10 +171,11 @@ clocks = <&scpi_dvfs 1>; cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; capacity-dmips-mhz = <485>; + dynamic-power-coefficient = <140>; }; A53_3: cpu@103 { - compatible = "arm,cortex-a53","arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x103>; device_type = "cpu"; enable-method = "psci"; @@ -184,6 +189,7 @@ clocks = <&scpi_dvfs 1>; cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; capacity-dmips-mhz = <485>; + dynamic-power-coefficient = <140>; }; A72_L2: l2-cache0 { diff --git a/dts/src/arm64/arm/juno.dts b/dts/src/arm64/arm/juno.dts index 08d4ba1716..f00cffbd03 100644 --- a/dts/src/arm64/arm/juno.dts +++ b/dts/src/arm64/arm/juno.dts @@ -84,7 +84,7 @@ }; A57_0: cpu@0 { - compatible = "arm,cortex-a57","arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0x0 0x0>; device_type = "cpu"; enable-method = "psci"; @@ -98,10 +98,11 @@ clocks = <&scpi_dvfs 0>; cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <530>; }; A57_1: cpu@1 { - compatible = "arm,cortex-a57","arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0x0 0x1>; device_type = "cpu"; enable-method = "psci"; @@ -115,10 +116,11 @@ clocks = <&scpi_dvfs 0>; cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <530>; }; A53_0: cpu@100 { - compatible = "arm,cortex-a53","arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x100>; device_type = "cpu"; enable-method = "psci"; @@ -132,10 +134,11 @@ clocks = <&scpi_dvfs 1>; cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; capacity-dmips-mhz = <578>; + dynamic-power-coefficient = <140>; }; A53_1: cpu@101 { - compatible = "arm,cortex-a53","arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x101>; device_type = "cpu"; enable-method = "psci"; @@ -149,10 +152,11 @@ clocks = <&scpi_dvfs 1>; cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; capacity-dmips-mhz = <578>; + dynamic-power-coefficient = <140>; }; A53_2: cpu@102 { - compatible = "arm,cortex-a53","arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x102>; device_type = "cpu"; enable-method = "psci"; @@ -166,10 +170,11 @@ clocks = <&scpi_dvfs 1>; cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; capacity-dmips-mhz = <578>; + dynamic-power-coefficient = <140>; }; A53_3: cpu@103 { - compatible = "arm,cortex-a53","arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x103>; device_type = "cpu"; enable-method = "psci"; @@ -183,6 +188,7 @@ clocks = <&scpi_dvfs 1>; cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; capacity-dmips-mhz = <578>; + dynamic-power-coefficient = <140>; }; A57_L2: l2-cache0 { diff --git a/dts/src/arm64/arm/rtsm_ve-aemv8a.dts b/dts/src/arm64/arm/rtsm_ve-aemv8a.dts index fe4fda473c..6e685d8833 100644 --- a/dts/src/arm64/arm/rtsm_ve-aemv8a.dts +++ b/dts/src/arm64/arm/rtsm_ve-aemv8a.dts @@ -10,6 +10,8 @@ /dts-v1/; +#include <dt-bindings/interrupt-controller/arm-gic.h> + /memreserve/ 0x80000000 0x00010000; #include "rtsm_ve-motherboard.dtsi" @@ -101,24 +103,24 @@ <0x0 0x2c002000 0 0x2000>, <0x0 0x2c004000 0 0x2000>, <0x0 0x2c006000 0 0x2000>; - interrupts = <1 9 0xf04>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; }; timer { compatible = "arm,armv8-timer"; - interrupts = <1 13 0xf08>, - <1 14 0xf08>, - <1 11 0xf08>, - <1 10 0xf08>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; clock-frequency = <100000000>; }; pmu { compatible = "arm,armv8-pmuv3"; - interrupts = <0 60 4>, - <0 61 4>, - <0 62 4>, - <0 63 4>; + interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; }; panel { @@ -144,48 +146,48 @@ #interrupt-cells = <1>; interrupt-map-mask = <0 0 63>; - interrupt-map = <0 0 0 &gic 0 0 4>, - <0 0 1 &gic 0 1 4>, - <0 0 2 &gic 0 2 4>, - <0 0 3 &gic 0 3 4>, - <0 0 4 &gic 0 4 4>, - <0 0 5 &gic 0 5 4>, - <0 0 6 &gic 0 6 4>, - <0 0 7 &gic 0 7 4>, - <0 0 8 &gic 0 8 4>, - <0 0 9 &gic 0 9 4>, - <0 0 10 &gic 0 10 4>, - <0 0 11 &gic 0 11 4>, - <0 0 12 &gic 0 12 4>, - <0 0 13 &gic 0 13 4>, - <0 0 14 &gic 0 14 4>, - <0 0 15 &gic 0 15 4>, - <0 0 16 &gic 0 16 4>, - <0 0 17 &gic 0 17 4>, - <0 0 18 &gic 0 18 4>, - <0 0 19 &gic 0 19 4>, - <0 0 20 &gic 0 20 4>, - <0 0 21 &gic 0 21 4>, - <0 0 22 &gic 0 22 4>, - <0 0 23 &gic 0 23 4>, - <0 0 24 &gic 0 24 4>, - <0 0 25 &gic 0 25 4>, - <0 0 26 &gic 0 26 4>, - <0 0 27 &gic 0 27 4>, - <0 0 28 &gic 0 28 4>, - <0 0 29 &gic 0 29 4>, - <0 0 30 &gic 0 30 4>, - <0 0 31 &gic 0 31 4>, - <0 0 32 &gic 0 32 4>, - <0 0 33 &gic 0 33 4>, - <0 0 34 &gic 0 34 4>, - <0 0 35 &gic 0 35 4>, - <0 0 36 &gic 0 36 4>, - <0 0 37 &gic 0 37 4>, - <0 0 38 &gic 0 38 4>, - <0 0 39 &gic 0 39 4>, - <0 0 40 &gic 0 40 4>, - <0 0 41 &gic 0 41 4>, - <0 0 42 &gic 0 42 4>; + interrupt-map = <0 0 0 &gic GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <0 0 1 &gic GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <0 0 2 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <0 0 3 &gic GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <0 0 4 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <0 0 5 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, + <0 0 6 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <0 0 7 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <0 0 8 &gic GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <0 0 9 &gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <0 0 10 &gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, + <0 0 11 &gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, + <0 0 12 &gic GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <0 0 13 &gic GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + <0 0 14 &gic GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, + <0 0 15 &gic GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, + <0 0 16 &gic GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, + <0 0 17 &gic GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, + <0 0 18 &gic GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, + <0 0 19 &gic GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, + <0 0 20 &gic GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>, + <0 0 21 &gic GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, + <0 0 22 &gic GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>, + <0 0 23 &gic GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>, + <0 0 24 &gic GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>, + <0 0 25 &gic GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>, + <0 0 26 &gic GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>, + <0 0 27 &gic GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>, + <0 0 28 &gic GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>, + <0 0 29 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>, + <0 0 30 &gic GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>, + <0 0 31 &gic GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>, + <0 0 32 &gic GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <0 0 33 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>, + <0 0 34 &gic GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>, + <0 0 35 &gic GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>, + <0 0 36 &gic GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, + <0 0 37 &gic GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, + <0 0 38 &gic GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, + <0 0 39 &gic GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, + <0 0 40 &gic GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, + <0 0 41 &gic GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, + <0 0 42 &gic GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; }; }; diff --git a/dts/src/arm64/arm/rtsm_ve-motherboard-rs2.dtsi b/dts/src/arm64/arm/rtsm_ve-motherboard-rs2.dtsi new file mode 100644 index 0000000000..57b0b9d7f3 --- /dev/null +++ b/dts/src/arm64/arm/rtsm_ve-motherboard-rs2.dtsi @@ -0,0 +1,27 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * ARM Ltd. Fast Models + * + * "rs2" extension for the v2m motherboard + */ +/ { + smb@8000000 { + motherboard { + arm,v2m-memory-map = "rs2"; + + iofpga@3,00000000 { + virtio-p9@140000 { + compatible = "virtio,mmio"; + reg = <0x140000 0x200>; + interrupts = <43>; + }; + + virtio-net@150000 { + compatible = "virtio,mmio"; + reg = <0x150000 0x200>; + interrupts = <44>; + }; + }; + }; + }; +}; diff --git a/dts/src/arm64/arm/rtsm_ve-motherboard.dtsi b/dts/src/arm64/arm/rtsm_ve-motherboard.dtsi index b25f3cbd3d..454cf6c44c 100644 --- a/dts/src/arm64/arm/rtsm_ve-motherboard.dtsi +++ b/dts/src/arm64/arm/rtsm_ve-motherboard.dtsi @@ -86,7 +86,7 @@ mmci@50000 { compatible = "arm,pl180", "arm,primecell"; reg = <0x050000 0x1000>; - interrupts = <9 10>; + interrupts = <9>, <10>; cd-gpios = <&v2m_sysreg 0 0>; wp-gpios = <&v2m_sysreg 1 0>; max-frequency = <12000000>; @@ -167,6 +167,12 @@ clock-names = "timclken1", "timclken2", "apb_pclk"; }; + virtio-block@130000 { + compatible = "virtio,mmio"; + reg = <0x130000 0x200>; + interrupts = <42>; + }; + rtc@170000 { compatible = "arm,pl031", "arm,primecell"; reg = <0x170000 0x1000>; @@ -193,12 +199,6 @@ }; }; }; - - virtio-block@130000 { - compatible = "virtio,mmio"; - reg = <0x130000 0x200>; - interrupts = <42>; - }; }; v2m_fixed_3v3: v2m-3v3 { diff --git a/dts/src/arm64/arm/vexpress-v2f-1xv7-ca53x2.dts b/dts/src/arm64/arm/vexpress-v2f-1xv7-ca53x2.dts index 8981c3d2ff..22383c26bb 100644 --- a/dts/src/arm64/arm/vexpress-v2f-1xv7-ca53x2.dts +++ b/dts/src/arm64/arm/vexpress-v2f-1xv7-ca53x2.dts @@ -43,14 +43,14 @@ cpu@0 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0 0>; next-level-cache = <&L2_0>; }; cpu@1 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0 1>; next-level-cache = <&L2_0>; }; diff --git a/dts/src/arm64/arm/vexpress-v2m-rs1.dtsi b/dts/src/arm64/arm/vexpress-v2m-rs1.dtsi index a9569d15de..d3963e9eaf 100644 --- a/dts/src/arm64/arm/vexpress-v2m-rs1.dtsi +++ b/dts/src/arm64/arm/vexpress-v2m-rs1.dtsi @@ -133,7 +133,7 @@ mmci@50000 { compatible = "arm,pl180", "arm,primecell"; reg = <0x050000 0x1000>; - interrupts = <9 10>; + interrupts = <9>, <10>; cd-gpios = <&v2m_mmc_gpios 0 0>; wp-gpios = <&v2m_mmc_gpios 1 0>; max-frequency = <12000000>; diff --git a/dts/src/arm64/bitmain/bm1880-sophon-edge.dts b/dts/src/arm64/bitmain/bm1880-sophon-edge.dts new file mode 100644 index 0000000000..6a32555971 --- /dev/null +++ b/dts/src/arm64/bitmain/bm1880-sophon-edge.dts @@ -0,0 +1,50 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 Linaro Ltd. + * Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + */ + +/dts-v1/; + +#include "bm1880.dtsi" + +/ { + compatible = "bitmain,sophon-edge", "bitmain,bm1880"; + model = "Sophon Edge"; + + aliases { + serial0 = &uart0; + serial1 = &uart2; + serial2 = &uart1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x1 0x00000000 0x0 0x40000000>; // 1GB + }; + + uart_clk: uart-clk { + compatible = "fixed-clock"; + clock-frequency = <500000000>; + #clock-cells = <0>; + }; +}; + +&uart0 { + status = "okay"; + clocks = <&uart_clk>; +}; + +&uart1 { + status = "okay"; + clocks = <&uart_clk>; +}; + +&uart2 { + status = "okay"; + clocks = <&uart_clk>; +}; diff --git a/dts/src/arm64/bitmain/bm1880.dtsi b/dts/src/arm64/bitmain/bm1880.dtsi new file mode 100644 index 0000000000..55a4769e0d --- /dev/null +++ b/dts/src/arm64/bitmain/bm1880.dtsi @@ -0,0 +1,119 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 Linaro Ltd. + * Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + compatible = "bitmain,bm1880"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0>; + enable-method = "psci"; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x1>; + enable-method = "psci"; + }; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + secmon@100000000 { + reg = <0x1 0x00000000 0x0 0x20000>; + no-map; + }; + + jpu@130000000 { + reg = <0x1 0x30000000 0x0 0x08000000>; // 128M + no-map; + }; + + vpu@138000000 { + reg = <0x1 0x38000000 0x0 0x08000000>; // 128M + no-map; + }; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gic: interrupt-controller@50001000 { + compatible = "arm,gic-400"; + reg = <0x0 0x50001000 0x0 0x1000>, + <0x0 0x50002000 0x0 0x2000>; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <3>; + }; + + uart0: serial@58018000 { + compatible = "snps,dw-apb-uart"; + reg = <0x0 0x58018000 0x0 0x2000>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + uart1: serial@5801A000 { + compatible = "snps,dw-apb-uart"; + reg = <0x0 0x5801a000 0x0 0x2000>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + uart2: serial@5801C000 { + compatible = "snps,dw-apb-uart"; + reg = <0x0 0x5801c000 0x0 0x2000>; + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + uart3: serial@5801E000 { + compatible = "snps,dw-apb-uart"; + reg = <0x0 0x5801e000 0x0 0x2000>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + }; +}; diff --git a/dts/src/arm64/broadcom/bcm2837-rpi-3-a-plus.dts b/dts/src/arm64/broadcom/bcm2837-rpi-3-a-plus.dts new file mode 100644 index 0000000000..f0ec56a1c4 --- /dev/null +++ b/dts/src/arm64/broadcom/bcm2837-rpi-3-a-plus.dts @@ -0,0 +1,2 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "arm/bcm2837-rpi-3-a-plus.dts" diff --git a/dts/src/arm64/broadcom/northstar2/ns2.dtsi b/dts/src/arm64/broadcom/northstar2/ns2.dtsi index ea854f689f..15f7b0ed38 100644 --- a/dts/src/arm64/broadcom/northstar2/ns2.dtsi +++ b/dts/src/arm64/broadcom/northstar2/ns2.dtsi @@ -47,7 +47,7 @@ A57_0: cpu@0 { device_type = "cpu"; - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0 0>; enable-method = "psci"; next-level-cache = <&CLUSTER0_L2>; @@ -55,7 +55,7 @@ A57_1: cpu@1 { device_type = "cpu"; - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0 1>; enable-method = "psci"; next-level-cache = <&CLUSTER0_L2>; @@ -63,7 +63,7 @@ A57_2: cpu@2 { device_type = "cpu"; - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0 2>; enable-method = "psci"; next-level-cache = <&CLUSTER0_L2>; @@ -71,7 +71,7 @@ A57_3: cpu@3 { device_type = "cpu"; - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0 3>; enable-method = "psci"; next-level-cache = <&CLUSTER0_L2>; diff --git a/dts/src/arm64/broadcom/stingray/stingray.dtsi b/dts/src/arm64/broadcom/stingray/stingray.dtsi index cfeaa855bd..35c4670c00 100644 --- a/dts/src/arm64/broadcom/stingray/stingray.dtsi +++ b/dts/src/arm64/broadcom/stingray/stingray.dtsi @@ -44,7 +44,7 @@ cpu@0 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x0 0x0>; enable-method = "psci"; next-level-cache = <&CLUSTER0_L2>; @@ -52,7 +52,7 @@ cpu@1 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x0 0x1>; enable-method = "psci"; next-level-cache = <&CLUSTER0_L2>; @@ -60,7 +60,7 @@ cpu@100 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x0 0x100>; enable-method = "psci"; next-level-cache = <&CLUSTER1_L2>; @@ -68,7 +68,7 @@ cpu@101 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x0 0x101>; enable-method = "psci"; next-level-cache = <&CLUSTER1_L2>; @@ -76,7 +76,7 @@ cpu@200 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x0 0x200>; enable-method = "psci"; next-level-cache = <&CLUSTER2_L2>; @@ -84,7 +84,7 @@ cpu@201 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x0 0x201>; enable-method = "psci"; next-level-cache = <&CLUSTER2_L2>; @@ -92,7 +92,7 @@ cpu@300 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x0 0x300>; enable-method = "psci"; next-level-cache = <&CLUSTER3_L2>; @@ -100,7 +100,7 @@ cpu@301 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x0 0x301>; enable-method = "psci"; next-level-cache = <&CLUSTER3_L2>; diff --git a/dts/src/arm64/cavium/thunder-88xx.dtsi b/dts/src/arm64/cavium/thunder-88xx.dtsi index 1a9103b269..e0a7179526 100644 --- a/dts/src/arm64/cavium/thunder-88xx.dtsi +++ b/dts/src/arm64/cavium/thunder-88xx.dtsi @@ -64,289 +64,289 @@ cpu@0 { device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; + compatible = "cavium,thunder"; reg = <0x0 0x000>; enable-method = "psci"; }; cpu@1 { device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; + compatible = "cavium,thunder"; reg = <0x0 0x001>; enable-method = "psci"; }; cpu@2 { device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; + compatible = "cavium,thunder"; reg = <0x0 0x002>; enable-method = "psci"; }; cpu@3 { device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; + compatible = "cavium,thunder"; reg = <0x0 0x003>; enable-method = "psci"; }; cpu@4 { device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; + compatible = "cavium,thunder"; reg = <0x0 0x004>; enable-method = "psci"; }; cpu@5 { device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; + compatible = "cavium,thunder"; reg = <0x0 0x005>; enable-method = "psci"; }; cpu@6 { device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; + compatible = "cavium,thunder"; reg = <0x0 0x006>; enable-method = "psci"; }; cpu@7 { device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; + compatible = "cavium,thunder"; reg = <0x0 0x007>; enable-method = "psci"; }; cpu@8 { device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; + compatible = "cavium,thunder"; reg = <0x0 0x008>; enable-method = "psci"; }; cpu@9 { device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; + compatible = "cavium,thunder"; reg = <0x0 0x009>; enable-method = "psci"; }; cpu@a { device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; + compatible = "cavium,thunder"; reg = <0x0 0x00a>; enable-method = "psci"; }; cpu@b { device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; + compatible = "cavium,thunder"; reg = <0x0 0x00b>; enable-method = "psci"; }; cpu@c { device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; + compatible = "cavium,thunder"; reg = <0x0 0x00c>; enable-method = "psci"; }; cpu@d { device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; + compatible = "cavium,thunder"; reg = <0x0 0x00d>; enable-method = "psci"; }; cpu@e { device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; + compatible = "cavium,thunder"; reg = <0x0 0x00e>; enable-method = "psci"; }; cpu@f { device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; + compatible = "cavium,thunder"; reg = <0x0 0x00f>; enable-method = "psci"; }; cpu@100 { device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; + compatible = "cavium,thunder"; reg = <0x0 0x100>; enable-method = "psci"; }; cpu@101 { device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; + compatible = "cavium,thunder"; reg = <0x0 0x101>; enable-method = "psci"; }; cpu@102 { device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; + compatible = "cavium,thunder"; reg = <0x0 0x102>; enable-method = "psci"; }; cpu@103 { device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; + compatible = "cavium,thunder"; reg = <0x0 0x103>; enable-method = "psci"; }; cpu@104 { device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; + compatible = "cavium,thunder"; reg = <0x0 0x104>; enable-method = "psci"; }; cpu@105 { device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; + compatible = "cavium,thunder"; reg = <0x0 0x105>; enable-method = "psci"; }; cpu@106 { device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; + compatible = "cavium,thunder"; reg = <0x0 0x106>; enable-method = "psci"; }; cpu@107 { device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; + compatible = "cavium,thunder"; reg = <0x0 0x107>; enable-method = "psci"; }; cpu@108 { device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; + compatible = "cavium,thunder"; reg = <0x0 0x108>; enable-method = "psci"; }; cpu@109 { device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; + compatible = "cavium,thunder"; reg = <0x0 0x109>; enable-method = "psci"; }; cpu@10a { device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; + compatible = "cavium,thunder"; reg = <0x0 0x10a>; enable-method = "psci"; }; cpu@10b { device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; + compatible = "cavium,thunder"; reg = <0x0 0x10b>; enable-method = "psci"; }; cpu@10c { device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; + compatible = "cavium,thunder"; reg = <0x0 0x10c>; enable-method = "psci"; }; cpu@10d { device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; + compatible = "cavium,thunder"; reg = <0x0 0x10d>; enable-method = "psci"; }; cpu@10e { device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; + compatible = "cavium,thunder"; reg = <0x0 0x10e>; enable-method = "psci"; }; cpu@10f { device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; + compatible = "cavium,thunder"; reg = <0x0 0x10f>; enable-method = "psci"; }; cpu@200 { device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; + compatible = "cavium,thunder"; reg = <0x0 0x200>; enable-method = "psci"; }; cpu@201 { device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; + compatible = "cavium,thunder"; reg = <0x0 0x201>; enable-method = "psci"; }; cpu@202 { device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; + compatible = "cavium,thunder"; reg = <0x0 0x202>; enable-method = "psci"; }; cpu@203 { device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; + compatible = "cavium,thunder"; reg = <0x0 0x203>; enable-method = "psci"; }; cpu@204 { device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; + compatible = "cavium,thunder"; reg = <0x0 0x204>; enable-method = "psci"; }; cpu@205 { device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; + compatible = "cavium,thunder"; reg = <0x0 0x205>; enable-method = "psci"; }; cpu@206 { device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; + compatible = "cavium,thunder"; reg = <0x0 0x206>; enable-method = "psci"; }; cpu@207 { device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; + compatible = "cavium,thunder"; reg = <0x0 0x207>; enable-method = "psci"; }; cpu@208 { device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; + compatible = "cavium,thunder"; reg = <0x0 0x208>; enable-method = "psci"; }; cpu@209 { device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; + compatible = "cavium,thunder"; reg = <0x0 0x209>; enable-method = "psci"; }; cpu@20a { device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; + compatible = "cavium,thunder"; reg = <0x0 0x20a>; enable-method = "psci"; }; cpu@20b { device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; + compatible = "cavium,thunder"; reg = <0x0 0x20b>; enable-method = "psci"; }; cpu@20c { device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; + compatible = "cavium,thunder"; reg = <0x0 0x20c>; enable-method = "psci"; }; cpu@20d { device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; + compatible = "cavium,thunder"; reg = <0x0 0x20d>; enable-method = "psci"; }; cpu@20e { device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; + compatible = "cavium,thunder"; reg = <0x0 0x20e>; enable-method = "psci"; }; cpu@20f { device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; + compatible = "cavium,thunder"; reg = <0x0 0x20f>; enable-method = "psci"; }; diff --git a/dts/src/arm64/cavium/thunder2-99xx.dtsi b/dts/src/arm64/cavium/thunder2-99xx.dtsi index ff5c4c47b2..0b7c935a47 100644 --- a/dts/src/arm64/cavium/thunder2-99xx.dtsi +++ b/dts/src/arm64/cavium/thunder2-99xx.dtsi @@ -27,28 +27,28 @@ cpu@0 { device_type = "cpu"; - compatible = "cavium,thunder2", "brcm,vulcan", "arm,armv8"; + compatible = "cavium,thunder2", "brcm,vulcan"; reg = <0x0 0x0>; enable-method = "psci"; }; cpu@1 { device_type = "cpu"; - compatible = "cavium,thunder2", "brcm,vulcan", "arm,armv8"; + compatible = "cavium,thunder2", "brcm,vulcan"; reg = <0x0 0x1>; enable-method = "psci"; }; cpu@2 { device_type = "cpu"; - compatible = "cavium,thunder2", "brcm,vulcan", "arm,armv8"; + compatible = "cavium,thunder2", "brcm,vulcan"; reg = <0x0 0x2>; enable-method = "psci"; }; cpu@3 { device_type = "cpu"; - compatible = "cavium,thunder2", "brcm,vulcan", "arm,armv8"; + compatible = "cavium,thunder2", "brcm,vulcan"; reg = <0x0 0x3>; enable-method = "psci"; }; diff --git a/dts/src/arm64/exynos/exynos5433.dtsi b/dts/src/arm64/exynos/exynos5433.dtsi index e7cd3b67d8..a04e80327b 100644 --- a/dts/src/arm64/exynos/exynos5433.dtsi +++ b/dts/src/arm64/exynos/exynos5433.dtsi @@ -29,7 +29,7 @@ cpu0: cpu@100 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; enable-method = "psci"; reg = <0x100>; clock-frequency = <1300000000>; @@ -41,7 +41,7 @@ cpu1: cpu@101 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; enable-method = "psci"; reg = <0x101>; clock-frequency = <1300000000>; @@ -51,7 +51,7 @@ cpu2: cpu@102 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; enable-method = "psci"; reg = <0x102>; clock-frequency = <1300000000>; @@ -61,7 +61,7 @@ cpu3: cpu@103 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; enable-method = "psci"; reg = <0x103>; clock-frequency = <1300000000>; @@ -71,7 +71,7 @@ cpu4: cpu@0 { device_type = "cpu"; - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; enable-method = "psci"; reg = <0x0>; clock-frequency = <1900000000>; @@ -83,7 +83,7 @@ cpu5: cpu@1 { device_type = "cpu"; - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; enable-method = "psci"; reg = <0x1>; clock-frequency = <1900000000>; @@ -93,7 +93,7 @@ cpu6: cpu@2 { device_type = "cpu"; - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; enable-method = "psci"; reg = <0x2>; clock-frequency = <1900000000>; @@ -103,7 +103,7 @@ cpu7: cpu@3 { device_type = "cpu"; - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; enable-method = "psci"; reg = <0x3>; clock-frequency = <1900000000>; diff --git a/dts/src/arm64/exynos/exynos7.dtsi b/dts/src/arm64/exynos/exynos7.dtsi index 75ad724c48..967558a93d 100644 --- a/dts/src/arm64/exynos/exynos7.dtsi +++ b/dts/src/arm64/exynos/exynos7.dtsi @@ -34,28 +34,28 @@ cpu_atlas0: cpu@0 { device_type = "cpu"; - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0x0>; enable-method = "psci"; }; cpu_atlas1: cpu@1 { device_type = "cpu"; - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0x1>; enable-method = "psci"; }; cpu_atlas2: cpu@2 { device_type = "cpu"; - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0x2>; enable-method = "psci"; }; cpu_atlas3: cpu@3 { device_type = "cpu"; - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0x3>; enable-method = "psci"; }; diff --git a/dts/src/arm64/freescale/fsl-ls1012a-oxalis.dts b/dts/src/arm64/freescale/fsl-ls1012a-oxalis.dts new file mode 100644 index 0000000000..7c726267ec --- /dev/null +++ b/dts/src/arm64/freescale/fsl-ls1012a-oxalis.dts @@ -0,0 +1,96 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree file for Oxalis + * + * Copyright (c) 2019 Manivannan Sadhasivam + * + */ + +/dts-v1/; + +#include "fsl-ls1012a.dtsi" + +/ { + model = "Oxalis"; + compatible = "ebs-systart,oxalis", "fsl,ls1012a"; + + sys_mclk: clock-mclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + + reg_1p8v: regulator-1p8v { + compatible = "regulator-fixed"; + regulator-name = "1P8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,widgets = + "Microphone", "Microphone Jack", + "Headphone", "Headphone Jack", + "Speaker", "Speaker Ext", + "Line", "Line In Jack"; + simple-audio-card,routing = + "MIC_IN", "Microphone Jack", + "Microphone Jack", "Mic Bias", + "LINE_IN", "Line In Jack", + "Headphone Jack", "HP_OUT", + "Speaker Ext", "LINE_OUT"; + + simple-audio-card,cpu { + sound-dai = <&sai2>; + frame-master; + bitclock-master; + }; + + simple-audio-card,codec { + sound-dai = <&codec>; + frame-master; + bitclock-master; + system-clock-frequency = <25000000>; + }; + }; +}; + +&duart0 { + status = "okay"; +}; + +&duart1 { + status = "okay"; +}; + +&esdhc1 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + codec: audio-codec@a { + #sound-dai-cells = <0>; + compatible = "fsl,sgtl5000"; + reg = <0xa>; + VDDA-supply = <®_1p8v>; + VDDIO-supply = <®_1p8v>; + clocks = <&sys_mclk>; + }; +}; + +&i2c1 { + status = "okay"; +}; + +&sai2 { + status = "okay"; +}; + +&sata { + status = "okay"; +}; diff --git a/dts/src/arm64/freescale/fsl-ls1012a.dtsi b/dts/src/arm64/freescale/fsl-ls1012a.dtsi index 816f3a4537..1ce0042b2a 100644 --- a/dts/src/arm64/freescale/fsl-ls1012a.dtsi +++ b/dts/src/arm64/freescale/fsl-ls1012a.dtsi @@ -446,6 +446,7 @@ dr_mode = "host"; snps,quirk-frame-length-adjustment = <0x20>; snps,dis_rxdet_inp3_quirk; + snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; }; sata: sata@3200000 { @@ -486,6 +487,7 @@ #size-cells = <2>; device_type = "pci"; num-lanes = <4>; + num-viewport = <2>; bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000 /* downstream I/O */ 0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ diff --git a/dts/src/arm64/freescale/fsl-ls1028a-rdb.dts b/dts/src/arm64/freescale/fsl-ls1028a-rdb.dts index fdeb4176fc..f86b054a74 100644 --- a/dts/src/arm64/freescale/fsl-ls1028a-rdb.dts +++ b/dts/src/arm64/freescale/fsl-ls1028a-rdb.dts @@ -71,3 +71,20 @@ &duart1 { status = "okay"; }; + +&enetc_port0 { + phy-handle = <&sgmii_phy0>; + phy-connection-type = "sgmii"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + sgmii_phy0: ethernet-phy@2 { + reg = <0x2>; + }; + }; +}; + +&enetc_port1 { + status = "disabled"; +}; diff --git a/dts/src/arm64/freescale/fsl-ls1028a.dtsi b/dts/src/arm64/freescale/fsl-ls1028a.dtsi index a8cf92af05..2896bbcfa3 100644 --- a/dts/src/arm64/freescale/fsl-ls1028a.dtsi +++ b/dts/src/arm64/freescale/fsl-ls1028a.dtsi @@ -335,5 +335,40 @@ <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>; }; + + pcie@1f0000000 { /* Integrated Endpoint Root Complex */ + compatible = "pci-host-ecam-generic"; + reg = <0x01 0xf0000000 0x0 0x100000>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + msi-parent = <&its>; + device_type = "pci"; + bus-range = <0x0 0x0>; + dma-coherent; + msi-map = <0 &its 0x17 0xe>; + iommu-map = <0 &smmu 0x17 0xe>; + /* PF0-6 BAR0 - non-prefetchable memory */ + ranges = <0x82000000 0x0 0x00000000 0x1 0xf8000000 0x0 0x160000 + /* PF0-6 BAR2 - prefetchable memory */ + 0xc2000000 0x0 0x00000000 0x1 0xf8160000 0x0 0x070000 + /* PF0: VF0-1 BAR0 - non-prefetchable memory */ + 0x82000000 0x0 0x00000000 0x1 0xf81d0000 0x0 0x020000 + /* PF0: VF0-1 BAR2 - prefetchable memory */ + 0xc2000000 0x0 0x00000000 0x1 0xf81f0000 0x0 0x020000 + /* PF1: VF0-1 BAR0 - non-prefetchable memory */ + 0x82000000 0x0 0x00000000 0x1 0xf8210000 0x0 0x020000 + /* PF1: VF0-1 BAR2 - prefetchable memory */ + 0xc2000000 0x0 0x00000000 0x1 0xf8230000 0x0 0x020000>; + + enetc_port0: ethernet@0,0 { + compatible = "fsl,enetc"; + reg = <0x000000 0 0 0 0>; + }; + enetc_port1: ethernet@0,1 { + compatible = "fsl,enetc"; + reg = <0x000100 0 0 0 0>; + }; + }; }; }; diff --git a/dts/src/arm64/freescale/fsl-ls1043a-qds.dts b/dts/src/arm64/freescale/fsl-ls1043a-qds.dts index 8a500940f1..1aac81da7e 100644 --- a/dts/src/arm64/freescale/fsl-ls1043a-qds.dts +++ b/dts/src/arm64/freescale/fsl-ls1043a-qds.dts @@ -137,7 +137,7 @@ &qspi { status = "okay"; - qflash0: s25fl128s@0 { + qflash0: flash@0 { compatible = "spansion,m25p80"; #address-cells = <1>; #size-cells = <1>; diff --git a/dts/src/arm64/freescale/fsl-ls1043a.dtsi b/dts/src/arm64/freescale/fsl-ls1043a.dtsi index 70057b4e46..6fd6116509 100644 --- a/dts/src/arm64/freescale/fsl-ls1043a.dtsi +++ b/dts/src/arm64/freescale/fsl-ls1043a.dtsi @@ -611,6 +611,7 @@ dr_mode = "host"; snps,quirk-frame-length-adjustment = <0x20>; snps,dis_rxdet_inp3_quirk; + snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; }; usb1: usb3@3000000 { @@ -620,6 +621,7 @@ dr_mode = "host"; snps,quirk-frame-length-adjustment = <0x20>; snps,dis_rxdet_inp3_quirk; + snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; }; usb2: usb3@3100000 { @@ -629,6 +631,7 @@ dr_mode = "host"; snps,quirk-frame-length-adjustment = <0x20>; snps,dis_rxdet_inp3_quirk; + snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; }; sata: sata@3200000 { @@ -675,6 +678,7 @@ device_type = "pci"; dma-coherent; num-lanes = <4>; + num-viewport = <6>; bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000 /* downstream I/O */ 0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ @@ -701,6 +705,7 @@ device_type = "pci"; dma-coherent; num-lanes = <2>; + num-viewport = <6>; bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000 /* downstream I/O */ 0x82000000 0x0 0x40000000 0x48 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ @@ -727,6 +732,7 @@ device_type = "pci"; dma-coherent; num-lanes = <2>; + num-viewport = <6>; bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x50 0x00010000 0x0 0x00010000 /* downstream I/O */ 0x82000000 0x0 0x40000000 0x50 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ diff --git a/dts/src/arm64/freescale/fsl-ls1046a-qds.dts b/dts/src/arm64/freescale/fsl-ls1046a-qds.dts index 2f220ec494..eec62c63da 100644 --- a/dts/src/arm64/freescale/fsl-ls1046a-qds.dts +++ b/dts/src/arm64/freescale/fsl-ls1046a-qds.dts @@ -165,7 +165,7 @@ &qspi { status = "okay"; - qflash0: s25fl128s@0 { + qflash0: flash@0 { compatible = "spansion,m25p80"; #address-cells = <1>; #size-cells = <1>; diff --git a/dts/src/arm64/freescale/fsl-ls1046a-rdb.dts b/dts/src/arm64/freescale/fsl-ls1046a-rdb.dts index 07c665c6e0..6a6514d0e5 100644 --- a/dts/src/arm64/freescale/fsl-ls1046a-rdb.dts +++ b/dts/src/arm64/freescale/fsl-ls1046a-rdb.dts @@ -101,7 +101,7 @@ &qspi { status = "okay"; - qflash0: s25fs512s@0 { + qflash0: flash@0 { compatible = "spansion,m25p80"; #address-cells = <1>; #size-cells = <1>; @@ -111,7 +111,7 @@ reg = <0>; }; - qflash1: s25fs512s@1 { + qflash1: flash@1 { compatible = "spansion,m25p80"; #address-cells = <1>; #size-cells = <1>; diff --git a/dts/src/arm64/freescale/fsl-ls1046a.dtsi b/dts/src/arm64/freescale/fsl-ls1046a.dtsi index 9a2106e60e..cb7185014d 100644 --- a/dts/src/arm64/freescale/fsl-ls1046a.dtsi +++ b/dts/src/arm64/freescale/fsl-ls1046a.dtsi @@ -202,6 +202,7 @@ compatible = "fsl,ifc", "simple-bus"; reg = <0x0 0x1530000 0x0 0x10000>; interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; }; qspi: spi@1550000 { @@ -424,6 +425,7 @@ reg = <0x00 0x21c0500 0x0 0x100>; interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clockgen 4 1>; + status = "disabled"; }; duart1: serial@21c0600 { @@ -431,6 +433,7 @@ reg = <0x00 0x21c0600 0x0 0x100>; interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clockgen 4 1>; + status = "disabled"; }; duart2: serial@21d0500 { @@ -438,6 +441,7 @@ reg = <0x0 0x21d0500 0x0 0x100>; interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clockgen 4 1>; + status = "disabled"; }; duart3: serial@21d0600 { @@ -445,6 +449,7 @@ reg = <0x0 0x21d0600 0x0 0x100>; interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clockgen 4 1>; + status = "disabled"; }; gpio0: gpio@2300000 { @@ -572,6 +577,7 @@ dr_mode = "host"; snps,quirk-frame-length-adjustment = <0x20>; snps,dis_rxdet_inp3_quirk; + snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; }; usb1: usb@3000000 { @@ -581,6 +587,7 @@ dr_mode = "host"; snps,quirk-frame-length-adjustment = <0x20>; snps,dis_rxdet_inp3_quirk; + snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; }; usb2: usb@3100000 { @@ -590,6 +597,7 @@ dr_mode = "host"; snps,quirk-frame-length-adjustment = <0x20>; snps,dis_rxdet_inp3_quirk; + snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; }; sata: sata@3200000 { @@ -644,6 +652,7 @@ device_type = "pci"; dma-coherent; num-lanes = <4>; + num-viewport = <8>; bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000 /* downstream I/O */ 0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ @@ -657,6 +666,17 @@ status = "disabled"; }; + pcie_ep@3400000 { + compatible = "fsl,ls1046a-pcie-ep","fsl,ls-pcie-ep"; + reg = <0x00 0x03400000 0x0 0x00100000 + 0x40 0x00000000 0x8 0x00000000>; + reg-names = "regs", "addr_space"; + num-ib-windows = <6>; + num-ob-windows = <8>; + num-lanes = <2>; + status = "disabled"; + }; + pcie@3500000 { compatible = "fsl,ls1046a-pcie"; reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */ @@ -670,6 +690,7 @@ device_type = "pci"; dma-coherent; num-lanes = <2>; + num-viewport = <8>; bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000 /* downstream I/O */ 0x82000000 0x0 0x40000000 0x48 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ @@ -683,6 +704,17 @@ status = "disabled"; }; + pcie_ep@3500000 { + compatible = "fsl,ls1046a-pcie-ep","fsl,ls-pcie-ep"; + reg = <0x00 0x03500000 0x0 0x00100000 + 0x48 0x00000000 0x8 0x00000000>; + reg-names = "regs", "addr_space"; + num-ib-windows = <6>; + num-ob-windows = <8>; + num-lanes = <2>; + status = "disabled"; + }; + pcie@3600000 { compatible = "fsl,ls1046a-pcie"; reg = <0x00 0x03600000 0x0 0x00100000 /* controller registers */ @@ -696,6 +728,7 @@ device_type = "pci"; dma-coherent; num-lanes = <2>; + num-viewport = <8>; bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x50 0x00010000 0x0 0x00010000 /* downstream I/O */ 0x82000000 0x0 0x40000000 0x50 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ @@ -709,6 +742,17 @@ status = "disabled"; }; + pcie_ep@3600000 { + compatible = "fsl,ls1046a-pcie-ep", "fsl,ls-pcie-ep"; + reg = <0x00 0x03600000 0x0 0x00100000 + 0x50 0x00000000 0x8 0x00000000>; + reg-names = "regs", "addr_space"; + num-ib-windows = <6>; + num-ob-windows = <8>; + num-lanes = <2>; + status = "disabled"; + }; + qdma: dma-controller@8380000 { compatible = "fsl,ls1046a-qdma", "fsl,ls1021a-qdma"; reg = <0x0 0x8380000 0x0 0x1000>, /* Controller regs */ @@ -729,7 +773,6 @@ queue-sizes = <64 64>; big-endian; }; - }; reserved-memory { diff --git a/dts/src/arm64/freescale/fsl-ls1088a.dtsi b/dts/src/arm64/freescale/fsl-ls1088a.dtsi index de93b42b1f..661137ffa3 100644 --- a/dts/src/arm64/freescale/fsl-ls1088a.dtsi +++ b/dts/src/arm64/freescale/fsl-ls1088a.dtsi @@ -377,6 +377,7 @@ dr_mode = "host"; snps,quirk-frame-length-adjustment = <0x20>; snps,dis_rxdet_inp3_quirk; + snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; status = "disabled"; }; @@ -452,6 +453,7 @@ device_type = "pci"; dma-coherent; num-lanes = <4>; + num-viewport = <256>; bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x20 0x00010000 0x0 0x00010000 /* downstream I/O */ 0x82000000 0x0 0x40000000 0x20 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ @@ -477,6 +479,7 @@ device_type = "pci"; dma-coherent; num-lanes = <4>; + num-viewport = <6>; bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x28 0x00010000 0x0 0x00010000 /* downstream I/O */ 0x82000000 0x0 0x40000000 0x28 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ @@ -502,6 +505,7 @@ device_type = "pci"; dma-coherent; num-lanes = <8>; + num-viewport = <6>; bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x30 0x00010000 0x0 0x00010000 /* downstream I/O */ 0x82000000 0x0 0x40000000 0x30 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ @@ -515,6 +519,96 @@ status = "disabled"; }; + smmu: iommu@5000000 { + compatible = "arm,mmu-500"; + reg = <0 0x5000000 0 0x800000>; + #iommu-cells = <1>; + stream-match-mask = <0x7C00>; + #global-interrupts = <12>; + // global secure fault + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + // combined secure + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, + // global non-secure fault + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, + // combined non-secure + <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, + // performance counter interrupts 0-7 + <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>, + // per context interrupt, 64 interrupts + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>; + }; + cluster1_core0_watchdog: wdt@c000000 { compatible = "arm,sp805-wdt", "arm,primecell"; reg = <0x0 0xc000000 0x0 0x1000>; @@ -576,6 +670,8 @@ reg = <0x00000008 0x0c000000 0 0x40>, /* MC portal base */ <0x00000000 0x08340000 0 0x40000>; /* MC control reg */ msi-parent = <&its>; + iommu-map = <0 &smmu 0 0>; /* This is fixed-up by u-boot */ + dma-coherent; #address-cells = <3>; #size-cells = <1>; @@ -649,5 +745,4 @@ method = "smc"; }; }; - }; diff --git a/dts/src/arm64/freescale/fsl-ls208xa.dtsi b/dts/src/arm64/freescale/fsl-ls208xa.dtsi index 6d6ca166f8..d7e78dcd15 100644 --- a/dts/src/arm64/freescale/fsl-ls208xa.dtsi +++ b/dts/src/arm64/freescale/fsl-ls208xa.dtsi @@ -627,6 +627,7 @@ device_type = "pci"; dma-coherent; num-lanes = <4>; + num-viewport = <6>; bus-range = <0x0 0xff>; msi-parent = <&its>; #interrupt-cells = <1>; @@ -648,6 +649,7 @@ device_type = "pci"; dma-coherent; num-lanes = <4>; + num-viewport = <6>; bus-range = <0x0 0xff>; msi-parent = <&its>; #interrupt-cells = <1>; @@ -669,6 +671,7 @@ device_type = "pci"; dma-coherent; num-lanes = <8>; + num-viewport = <256>; bus-range = <0x0 0xff>; msi-parent = <&its>; #interrupt-cells = <1>; @@ -690,6 +693,7 @@ device_type = "pci"; dma-coherent; num-lanes = <4>; + num-viewport = <6>; bus-range = <0x0 0xff>; msi-parent = <&its>; #interrupt-cells = <1>; @@ -727,6 +731,7 @@ dr_mode = "host"; snps,quirk-frame-length-adjustment = <0x20>; snps,dis_rxdet_inp3_quirk; + snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; }; usb1: usb3@3110000 { @@ -737,6 +742,7 @@ dr_mode = "host"; snps,quirk-frame-length-adjustment = <0x20>; snps,dis_rxdet_inp3_quirk; + snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; }; ccn@4000000 { diff --git a/dts/src/arm64/freescale/fsl-lx2160a-rdb.dts b/dts/src/arm64/freescale/fsl-lx2160a-rdb.dts index 6481e5f20e..9df37b1594 100644 --- a/dts/src/arm64/freescale/fsl-lx2160a-rdb.dts +++ b/dts/src/arm64/freescale/fsl-lx2160a-rdb.dts @@ -50,6 +50,32 @@ status = "okay"; }; +&fspi { + status = "okay"; + + mt35xu512aba0: flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,m25p80"; + m25p,fast-read; + spi-max-frequency = <50000000>; + reg = <0>; + spi-rx-bus-width = <8>; + spi-tx-bus-width = <8>; + }; + + mt35xu512aba1: flash@1 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,m25p80"; + m25p,fast-read; + spi-max-frequency = <50000000>; + reg = <1>; + spi-rx-bus-width = <8>; + spi-tx-bus-width = <8>; + }; +}; + &i2c0 { status = "okay"; diff --git a/dts/src/arm64/freescale/fsl-lx2160a.dtsi b/dts/src/arm64/freescale/fsl-lx2160a.dtsi index a79f5c1ea5..fe87204850 100644 --- a/dts/src/arm64/freescale/fsl-lx2160a.dtsi +++ b/dts/src/arm64/freescale/fsl-lx2160a.dtsi @@ -398,6 +398,7 @@ #address-cells = <2>; #size-cells = <2>; ranges; + dma-ranges = <0x0 0x0 0x0 0x0 0x10000 0x00000000>; crypto: crypto@8000000 { compatible = "fsl,sec-v5.0", "fsl,sec-v4.0"; @@ -542,6 +543,19 @@ status = "disabled"; }; + fspi: spi@20c0000 { + compatible = "nxp,lx2160a-fspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x20c0000 0x0 0x10000>, + <0x0 0x20000000 0x0 0x10000000>; + reg-names = "fspi_base", "fspi_mmap"; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 3>, <&clockgen 4 3>; + clock-names = "fspi_en", "fspi"; + status = "disabled"; + }; + esdhc0: esdhc@2140000 { compatible = "fsl,esdhc"; reg = <0x0 0x2140000 0x0 0x10000>; @@ -658,6 +672,7 @@ dr_mode = "host"; snps,quirk-frame-length-adjustment = <0x20>; snps,dis_rxdet_inp3_quirk; + snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; status = "disabled"; }; @@ -668,6 +683,7 @@ dr_mode = "host"; snps,quirk-frame-length-adjustment = <0x20>; snps,dis_rxdet_inp3_quirk; + snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; status = "disabled"; }; @@ -762,5 +778,122 @@ <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>; dma-coherent; }; + + fsl_mc: fsl-mc@80c000000 { + compatible = "fsl,qoriq-mc"; + reg = <0x00000008 0x0c000000 0 0x40>, + <0x00000000 0x08340000 0 0x40000>; + msi-parent = <&its>; + /* iommu-map property is fixed up by u-boot */ + iommu-map = <0 &smmu 0 0>; + dma-coherent; + #address-cells = <3>; + #size-cells = <1>; + + /* + * Region type 0x0 - MC portals + * Region type 0x1 - QBMAN portals + */ + ranges = <0x0 0x0 0x0 0x8 0x0c000000 0x4000000 + 0x1 0x0 0x0 0x8 0x18000000 0x8000000>; + + /* + * Define the maximum number of MACs present on the SoC. + */ + dpmacs { + #address-cells = <1>; + #size-cells = <0>; + + dpmac1: dpmac@1 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0x1>; + }; + + dpmac2: dpmac@2 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0x2>; + }; + + dpmac3: dpmac@3 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0x3>; + }; + + dpmac4: dpmac@4 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0x4>; + }; + + dpmac5: dpmac@5 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0x5>; + }; + + dpmac6: dpmac@6 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0x6>; + }; + + dpmac7: dpmac@7 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0x7>; + }; + + dpmac8: dpmac@8 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0x8>; + }; + + dpmac9: dpmac@9 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0x9>; + }; + + dpmac10: dpmac@a { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0xa>; + }; + + dpmac11: dpmac@b { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0xb>; + }; + + dpmac12: dpmac@c { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0xc>; + }; + + dpmac13: dpmac@d { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0xd>; + }; + + dpmac14: dpmac@e { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0xe>; + }; + + dpmac15: dpmac@f { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0xf>; + }; + + dpmac16: dpmac@10 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0x10>; + }; + + dpmac17: dpmac@11 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0x11>; + }; + + dpmac18: dpmac@12 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0x12>; + }; + }; + }; }; }; diff --git a/dts/src/arm64/freescale/imx8mm-pinfunc.h b/dts/src/arm64/freescale/imx8mm-pinfunc.h new file mode 100644 index 0000000000..e25f7fcd79 --- /dev/null +++ b/dts/src/arm64/freescale/imx8mm-pinfunc.h @@ -0,0 +1,629 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2017-2018 NXP + */ + +#ifndef __DTS_IMX8MM_PINFUNC_H +#define __DTS_IMX8MM_PINFUNC_H + +/* + * The pin function ID is a tuple of + * <mux_reg conf_reg input_reg mux_mode input_val> + */ + +#define MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x028 0x290 0x000 0x0 0x0 +#define MX8MM_IOMUXC_GPIO1_IO00_CCMSRCGPCMIX_ENET_PHY_REF_CLK_ROOT 0x028 0x290 0x4C0 0x1 0x0 +#define MX8MM_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K 0x028 0x290 0x000 0x5 0x0 +#define MX8MM_IOMUXC_GPIO1_IO00_CCMSRCGPCMIX_EXT_CLK1 0x028 0x290 0x000 0x6 0x0 +#define MX8MM_IOMUXC_GPIO1_IO00_SJC_FAIL 0x028 0x290 0x000 0x7 0x0 +#define MX8MM_IOMUXC_GPIO1_IO01_GPIO1_IO1 0x02C 0x294 0x000 0x0 0x0 +#define MX8MM_IOMUXC_GPIO1_IO01_PWM1_OUT 0x02C 0x294 0x000 0x1 0x0 +#define MX8MM_IOMUXC_GPIO1_IO01_ANAMIX_REF_CLK_24M 0x02C 0x294 0x4BC 0x5 0x0 +#define MX8MM_IOMUXC_GPIO1_IO01_CCMSRCGPCMIX_EXT_CLK2 0x02C 0x294 0x000 0x6 0x0 +#define MX8MM_IOMUXC_GPIO1_IO01_SJC_ACTIVE 0x02C 0x294 0x000 0x7 0x0 +#define MX8MM_IOMUXC_GPIO1_IO02_GPIO1_IO2 0x030 0x298 0x000 0x0 0x0 +#define MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0x030 0x298 0x000 0x1 0x0 +#define MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_ANY 0x030 0x298 0x000 0x5 0x0 +#define MX8MM_IOMUXC_GPIO1_IO02_SJC_DE_B 0x030 0x298 0x000 0x7 0x0 +#define MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x034 0x29C 0x000 0x0 0x0 +#define MX8MM_IOMUXC_GPIO1_IO03_USDHC1_VSELECT 0x034 0x29C 0x000 0x1 0x0 +#define MX8MM_IOMUXC_GPIO1_IO03_SDMA1_EXT_EVENT0 0x034 0x29C 0x000 0x5 0x0 +#define MX8MM_IOMUXC_GPIO1_IO03_ANAMIX_XTAL_OK 0x034 0x29C 0x000 0x6 0x0 +#define MX8MM_IOMUXC_GPIO1_IO03_SJC_DONE 0x034 0x29C 0x000 0x7 0x0 +#define MX8MM_IOMUXC_GPIO1_IO04_GPIO1_IO4 0x038 0x2A0 0x000 0x0 0x0 +#define MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x038 0x2A0 0x000 0x1 0x0 +#define MX8MM_IOMUXC_GPIO1_IO04_SDMA1_EXT_EVENT1 0x038 0x2A0 0x000 0x5 0x0 +#define MX8MM_IOMUXC_GPIO1_IO04_ANAMIX_XTAL_OK_LV 0x038 0x2A0 0x000 0x6 0x0 +#define MX8MM_IOMUXC_GPIO1_IO04_USDHC1_TEST_TRIG 0x038 0x2A0 0x000 0x7 0x0 +#define MX8MM_IOMUXC_GPIO1_IO05_GPIO1_IO5 0x03C 0x2A4 0x000 0x0 0x0 +#define MX8MM_IOMUXC_GPIO1_IO05_M4_NMI 0x03C 0x2A4 0x000 0x1 0x0 +#define MX8MM_IOMUXC_GPIO1_IO05_CCMSRCGPCMIX_PMIC_READY 0x03C 0x2A4 0x000 0x5 0x0 +#define MX8MM_IOMUXC_GPIO1_IO05_CCMSRCGPCMIX_INT_BOOT 0x03C 0x2A4 0x000 0x6 0x0 +#define MX8MM_IOMUXC_GPIO1_IO05_USDHC2_TEST_TRIG 0x03C 0x2A4 0x000 0x7 0x0 +#define MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x040 0x2A8 0x000 0x0 0x0 +#define MX8MM_IOMUXC_GPIO1_IO06_ENET1_MDC 0x040 0x2A8 0x000 0x1 0x0 +#define MX8MM_IOMUXC_GPIO1_IO06_USDHC1_CD_B 0x040 0x2A8 0x000 0x5 0x0 +#define MX8MM_IOMUXC_GPIO1_IO06_CCMSRCGPCMIX_EXT_CLK3 0x040 0x2A8 0x000 0x6 0x0 +#define MX8MM_IOMUXC_GPIO1_IO06_ECSPI1_TEST_TRIG 0x040 0x2A8 0x000 0x7 0x0 +#define MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x044 0x2AC 0x000 0x0 0x0 +#define MX8MM_IOMUXC_GPIO1_IO07_ENET1_MDIO 0x044 0x2AC 0x000 0x1 0x0 +#define MX8MM_IOMUXC_GPIO1_IO07_USDHC1_WP 0x044 0x2AC 0x000 0x5 0x0 +#define MX8MM_IOMUXC_GPIO1_IO07_CCMSRCGPCMIX_EXT_CLK4 0x044 0x2AC 0x000 0x6 0x0 +#define MX8MM_IOMUXC_GPIO1_IO07_ECSPI2_TEST_TRIG 0x044 0x2AC 0x000 0x7 0x0 +#define MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x048 0x2B0 0x000 0x0 0x0 +#define MX8MM_IOMUXC_GPIO1_IO08_ENET1_1588_EVENT0_IN 0x048 0x2B0 0x000 0x1 0x0 +#define MX8MM_IOMUXC_GPIO1_IO08_USDHC2_RESET_B 0x048 0x2B0 0x000 0x5 0x0 +#define MX8MM_IOMUXC_GPIO1_IO08_CCMSRCGPCMIX_WAIT 0x048 0x2B0 0x000 0x6 0x0 +#define MX8MM_IOMUXC_GPIO1_IO08_QSPI_TEST_TRIG 0x048 0x2B0 0x000 0x7 0x0 +#define MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x04C 0x2B4 0x000 0x0 0x0 +#define MX8MM_IOMUXC_GPIO1_IO09_ENET1_1588_EVENT0_OUT 0x04C 0x2B4 0x000 0x1 0x0 +#define MX8MM_IOMUXC_GPIO1_IO09_SDMA2_EXT_EVENT0 0x04C 0x2B4 0x000 0x5 0x0 +#define MX8MM_IOMUXC_GPIO1_IO09_CCMSRCGPCMIX_STOP 0x04C 0x2B4 0x000 0x6 0x0 +#define MX8MM_IOMUXC_GPIO1_IO09_RAWNAND_TEST_TRIG 0x04C 0x2B4 0x000 0x7 0x0 +#define MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x050 0x2B8 0x000 0x0 0x0 +#define MX8MM_IOMUXC_GPIO1_IO10_USB1_OTG_ID 0x050 0x2B8 0x000 0x1 0x0 +#define MX8MM_IOMUXC_GPIO1_IO10_OCOTP_CTRL_WRAPPER_FUSE_LATCHED 0x050 0x2B8 0x000 0x7 0x0 +#define MX8MM_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x054 0x2BC 0x000 0x0 0x0 +#define MX8MM_IOMUXC_GPIO1_IO11_USB2_OTG_ID 0x054 0x2BC 0x000 0x1 0x0 +#define MX8MM_IOMUXC_GPIO1_IO11_CCMSRCGPCMIX_PMIC_READY 0x054 0x2BC 0x4BC 0x5 0x1 +#define MX8MM_IOMUXC_GPIO1_IO11_CCMSRCGPCMIX_OUT0 0x054 0x2BC 0x000 0x6 0x0 +#define MX8MM_IOMUXC_GPIO1_IO11_CAAM_WRAPPER_RNG_OSC_OBS 0x054 0x2BC 0x000 0x7 0x0 +#define MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x058 0x2C0 0x000 0x0 0x0 +#define MX8MM_IOMUXC_GPIO1_IO12_USB1_OTG_PWR 0x058 0x2C0 0x000 0x1 0x0 +#define MX8MM_IOMUXC_GPIO1_IO12_SDMA2_EXT_EVENT1 0x058 0x2C0 0x000 0x5 0x0 +#define MX8MM_IOMUXC_GPIO1_IO12_CCMSRCGPCMIX_OUT1 0x058 0x2C0 0x000 0x6 0x0 +#define MX8MM_IOMUXC_GPIO1_IO12_CSU_CSU_ALARM_AUT0 0x058 0x2C0 0x000 0x7 0x0 +#define MX8MM_IOMUXC_GPIO1_IO13_GPIO1_IO13 0x05C 0x2C4 0x000 0x0 0x0 +#define MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC 0x05C 0x2C4 0x000 0x1 0x0 +#define MX8MM_IOMUXC_GPIO1_IO13_PWM2_OUT 0x05C 0x2C4 0x000 0x5 0x0 +#define MX8MM_IOMUXC_GPIO1_IO13_CCMSRCGPCMIX_OUT2 0x05C 0x2C4 0x000 0x6 0x0 +#define MX8MM_IOMUXC_GPIO1_IO13_CSU_CSU_ALARM_AUT1 0x05C 0x2C4 0x000 0x7 0x0 +#define MX8MM_IOMUXC_GPIO1_IO14_GPIO1_IO14 0x060 0x2C8 0x000 0x0 0x0 +#define MX8MM_IOMUXC_GPIO1_IO14_USB2_OTG_PWR 0x060 0x2C8 0x000 0x1 0x0 +#define MX8MM_IOMUXC_GPIO1_IO14_PWM3_OUT 0x060 0x2C8 0x000 0x5 0x0 +#define MX8MM_IOMUXC_GPIO1_IO14_CCMSRCGPCMIX_CLKO1 0x060 0x2C8 0x000 0x6 0x0 +#define MX8MM_IOMUXC_GPIO1_IO14_CSU_CSU_ALARM_AUT2 0x060 0x2C8 0x000 0x7 0x0 +#define MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x064 0x2CC 0x000 0x0 0x0 +#define MX8MM_IOMUXC_GPIO1_IO15_USB2_OTG_OC 0x064 0x2CC 0x000 0x1 0x0 +#define MX8MM_IOMUXC_GPIO1_IO15_PWM4_OUT 0x064 0x2CC 0x000 0x5 0x0 +#define MX8MM_IOMUXC_GPIO1_IO15_CCMSRCGPCMIX_CLKO2 0x064 0x2CC 0x000 0x6 0x0 +#define MX8MM_IOMUXC_GPIO1_IO15_CSU_CSU_INT_DEB 0x064 0x2CC 0x000 0x7 0x0 +#define MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x068 0x2D0 0x000 0x0 0x0 +#define MX8MM_IOMUXC_ENET_MDC_GPIO1_IO16 0x068 0x2D0 0x000 0x5 0x0 +#define MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x06C 0x2D4 0x4C0 0x0 0x1 +#define MX8MM_IOMUXC_ENET_MDIO_GPIO1_IO17 0x06C 0x2D4 0x000 0x5 0x0 +#define MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x070 0x2D8 0x000 0x0 0x0 +#define MX8MM_IOMUXC_ENET_TD3_GPIO1_IO18 0x070 0x2D8 0x000 0x5 0x0 +#define MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x074 0x2DC 0x000 0x0 0x0 +#define MX8MM_IOMUXC_ENET_TD2_ENET1_TX_CLK 0x074 0x2DC 0x000 0x1 0x0 +#define MX8MM_IOMUXC_ENET_TD2_GPIO1_IO19 0x074 0x2DC 0x000 0x5 0x0 +#define MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x078 0x2E0 0x000 0x0 0x0 +#define MX8MM_IOMUXC_ENET_TD1_GPIO1_IO20 0x078 0x2E0 0x000 0x5 0x0 +#define MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x07C 0x2E4 0x000 0x0 0x0 +#define MX8MM_IOMUXC_ENET_TD0_GPIO1_IO21 0x07C 0x2E4 0x000 0x5 0x0 +#define MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x080 0x2E8 0x000 0x0 0x0 +#define MX8MM_IOMUXC_ENET_TX_CTL_GPIO1_IO22 0x080 0x2E8 0x000 0x5 0x0 +#define MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x084 0x2EC 0x000 0x0 0x0 +#define MX8MM_IOMUXC_ENET_TXC_ENET1_TX_ER 0x084 0x2EC 0x000 0x1 0x0 +#define MX8MM_IOMUXC_ENET_TXC_GPIO1_IO23 0x084 0x2EC 0x000 0x5 0x0 +#define MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x088 0x2F0 0x000 0x0 0x0 +#define MX8MM_IOMUXC_ENET_RX_CTL_GPIO1_IO24 0x088 0x2F0 0x000 0x5 0x0 +#define MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x08C 0x2F4 0x000 0x0 0x0 +#define MX8MM_IOMUXC_ENET_RXC_ENET1_RX_ER 0x08C 0x2F4 0x000 0x1 0x0 +#define MX8MM_IOMUXC_ENET_RXC_GPIO1_IO25 0x08C 0x2F4 0x000 0x5 0x0 +#define MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x090 0x2F8 0x000 0x0 0x0 +#define MX8MM_IOMUXC_ENET_RD0_GPIO1_IO26 0x090 0x2F8 0x000 0x5 0x0 +#define MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x094 0x2FC 0x000 0x0 0x0 +#define MX8MM_IOMUXC_ENET_RD1_GPIO1_IO27 0x094 0x2FC 0x000 0x5 0x0 +#define MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x098 0x300 0x000 0x0 0x0 +#define MX8MM_IOMUXC_ENET_RD2_GPIO1_IO28 0x098 0x300 0x000 0x5 0x0 +#define MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x09C 0x304 0x000 0x0 0x0 +#define MX8MM_IOMUXC_ENET_RD3_GPIO1_IO29 0x09C 0x304 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x0A0 0x308 0x000 0x0 0x0 +#define MX8MM_IOMUXC_SD1_CLK_GPIO2_IO0 0x0A0 0x308 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x0A4 0x30C 0x000 0x0 0x0 +#define MX8MM_IOMUXC_SD1_CMD_GPIO2_IO1 0x0A4 0x30C 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x0A8 0x310 0x000 0x0 0x0 +#define MX8MM_IOMUXC_SD1_DATA0_GPIO2_IO2 0x0A8 0x31 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x0AC 0x314 0x000 0x0 0x0 +#define MX8MM_IOMUXC_SD1_DATA1_GPIO2_IO3 0x0AC 0x314 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x0B0 0x318 0x000 0x0 0x0 +#define MX8MM_IOMUXC_SD1_DATA2_GPIO2_IO4 0x0B0 0x318 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x0B4 0x31C 0x000 0x0 0x0 +#define MX8MM_IOMUXC_SD1_DATA3_GPIO2_IO5 0x0B4 0x31C 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4 0x0B8 0x320 0x000 0x0 0x0 +#define MX8MM_IOMUXC_SD1_DATA4_GPIO2_IO6 0x0B8 0x320 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5 0x0BC 0x324 0x000 0x0 0x0 +#define MX8MM_IOMUXC_SD1_DATA5_GPIO2_IO7 0x0BC 0x324 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6 0x0C0 0x328 0x000 0x0 0x0 +#define MX8MM_IOMUXC_SD1_DATA6_GPIO2_IO8 0x0C0 0x328 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7 0x0C4 0x32C 0x000 0x0 0x0 +#define MX8MM_IOMUXC_SD1_DATA7_GPIO2_IO9 0x0C4 0x32C 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0x0C8 0x330 0x000 0x0 0x0 +#define MX8MM_IOMUXC_SD1_RESET_B_GPIO2_IO10 0x0C8 0x330 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x0CC 0x334 0x000 0x0 0x0 +#define MX8MM_IOMUXC_SD1_STROBE_GPIO2_IO11 0x0CC 0x334 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SD2_CD_B_USDHC2_CD_B 0x0D0 0x338 0x000 0x0 0x0 +#define MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x0D0 0x338 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x0D4 0x33C 0x000 0x0 0x0 +#define MX8MM_IOMUXC_SD2_CLK_GPIO2_IO13 0x0D4 0x33C 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SD2_CLK_CCMSRCGPCMIX_OBSERVE0 0x0D4 0x33C 0x000 0x6 0x0 +#define MX8MM_IOMUXC_SD2_CLK_OBSERVE_MUX_OUT0 0x0D4 0x33C 0x000 0x7 0x0 +#define MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x0D8 0x340 0x000 0x0 0x0 +#define MX8MM_IOMUXC_SD2_CMD_GPIO2_IO14 0x0D8 0x340 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SD2_CMD_CCMSRCGPCMIX_OBSERVE1 0x0D8 0x340 0x000 0x6 0x0 +#define MX8MM_IOMUXC_SD2_CMD_OBSERVE_MUX_OUT1 0x0D8 0x340 0x000 0x7 0x0 +#define MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x0DC 0x344 0x000 0x0 0x0 +#define MX8MM_IOMUXC_SD2_DATA0_GPIO2_IO15 0x0DC 0x344 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SD2_DATA0_CCMSRCGPCMIX_OBSERVE2 0x0DC 0x344 0x000 0x6 0x0 +#define MX8MM_IOMUXC_SD2_DATA0_OBSERVE_MUX_OUT2 0x0DC 0x344 0x000 0x7 0x0 +#define MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x0E0 0x348 0x000 0x0 0x0 +#define MX8MM_IOMUXC_SD2_DATA1_GPIO2_IO16 0x0E0 0x348 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SD2_DATA1_CCMSRCGPCMIX_WAIT 0x0E0 0x348 0x000 0x6 0x0 +#define MX8MM_IOMUXC_SD2_DATA1_OBSERVE_MUX_OUT3 0x0E0 0x348 0x000 0x7 0x0 +#define MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x0E4 0x34C 0x000 0x0 0x0 +#define MX8MM_IOMUXC_SD2_DATA2_GPIO2_IO17 0x0E4 0x34C 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SD2_DATA2_CCMSRCGPCMIX_STOP 0x0E4 0x34C 0x000 0x6 0x0 +#define MX8MM_IOMUXC_SD2_DATA2_OBSERVE_MUX_OUT4 0x0E4 0x34C 0x000 0x7 0x0 +#define MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x0E8 0x350 0x000 0x0 0x0 +#define MX8MM_IOMUXC_SD2_DATA3_GPIO2_IO18 0x0E8 0x350 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SD2_DATA3_CCMSRCGPCMIX_EARLY_RESET 0x0E8 0x350 0x000 0x6 0x0 +#define MX8MM_IOMUXC_SD2_RESET_B_USDHC2_RESET_B 0x0EC 0x354 0x000 0x0 0x0 +#define MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x0EC 0x354 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SD2_RESET_B_CCMSRCGPCMIX_SYSTEM_RESET 0x0EC 0x354 0x000 0x6 0x0 +#define MX8MM_IOMUXC_SD2_WP_USDHC2_WP 0x0F0 0x358 0x000 0x0 0x0 +#define MX8MM_IOMUXC_SD2_WP_GPIO2_IO20 0x0F0 0x358 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SD2_WP_SIM_M_HMASTLOCK 0x0F0 0x358 0x000 0x7 0x0 +#define MX8MM_IOMUXC_NAND_ALE_RAWNAND_ALE 0x0F4 0x35C 0x000 0x0 0x0 +#define MX8MM_IOMUXC_NAND_ALE_QSPI_A_SCLK 0x0F4 0x35C 0x000 0x1 0x0 +#define MX8MM_IOMUXC_NAND_ALE_GPIO3_IO0 0x0F4 0x35C 0x000 0x5 0x0 +#define MX8MM_IOMUXC_NAND_ALE_SIM_M_HPROT0 0x0F4 0x35C 0x000 0x7 0x0 +#define MX8MM_IOMUXC_NAND_CE0_B_RAWNAND_CE0_B 0x0F8 0x360 0x000 0x0 0x0 +#define MX8MM_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B 0x0F8 0x360 0x000 0x1 0x0 +#define MX8MM_IOMUXC_NAND_CE0_B_GPIO3_IO1 0x0F8 0x360 0x000 0x5 0x0 +#define MX8MM_IOMUXC_NAND_CE0_B_SIM_M_HPROT1 0x0F8 0x360 0x000 0x7 0x0 +#define MX8MM_IOMUXC_NAND_CE1_B_RAWNAND_CE1_B 0x0FC 0x364 0x000 0x0 0x0 +#define MX8MM_IOMUXC_NAND_CE1_B_QSPI_A_SS1_B 0x0FC 0x364 0x000 0x1 0x0 +#define MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x0FC 0x364 0x000 0x2 0x0 +#define MX8MM_IOMUXC_NAND_CE1_B_GPIO3_IO2 0x0FC 0x364 0x000 0x5 0x0 +#define MX8MM_IOMUXC_NAND_CE1_B_SIM_M_HPROT2 0x0FC 0x364 0x000 0x7 0x0 +#define MX8MM_IOMUXC_NAND_CE2_B_RAWNAND_CE2_B 0x100 0x368 0x000 0x0 0x0 +#define MX8MM_IOMUXC_NAND_CE2_B_QSPI_B_SS0_B 0x100 0x368 0x000 0x1 0x0 +#define MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x100 0x368 0x000 0x2 0x0 +#define MX8MM_IOMUXC_NAND_CE2_B_GPIO3_IO3 0x100 0x368 0x000 0x5 0x0 +#define MX8MM_IOMUXC_NAND_CE2_B_SIM_M_HPROT3 0x100 0x368 0x000 0x7 0x0 +#define MX8MM_IOMUXC_NAND_CE3_B_RAWNAND_CE3_B 0x104 0x36C 0x000 0x0 0x0 +#define MX8MM_IOMUXC_NAND_CE3_B_QSPI_B_SS1_B 0x104 0x36C 0x000 0x1 0x0 +#define MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x104 0x36C 0x000 0x2 0x0 +#define MX8MM_IOMUXC_NAND_CE3_B_GPIO3_IO4 0x104 0x36C 0x000 0x5 0x0 +#define MX8MM_IOMUXC_NAND_CE3_B_SIM_M_HADDR0 0x104 0x36C 0x000 0x7 0x0 +#define MX8MM_IOMUXC_NAND_CLE_RAWNAND_CLE 0x108 0x370 0x000 0x0 0x0 +#define MX8MM_IOMUXC_NAND_CLE_QSPI_B_SCLK 0x108 0x370 0x000 0x1 0x0 +#define MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x108 0x370 0x000 0x2 0x0 +#define MX8MM_IOMUXC_NAND_CLE_GPIO3_IO5 0x108 0x370 0x000 0x5 0x0 +#define MX8MM_IOMUXC_NAND_CLE_SIM_M_HADDR1 0x108 0x370 0x000 0x7 0x0 +#define MX8MM_IOMUXC_NAND_DATA00_RAWNAND_DATA00 0x10C 0x374 0x000 0x0 0x0 +#define MX8MM_IOMUXC_NAND_DATA00_QSPI_A_DATA0 0x10C 0x374 0x000 0x1 0x0 +#define MX8MM_IOMUXC_NAND_DATA00_GPIO3_IO6 0x10C 0x374 0x000 0x5 0x0 +#define MX8MM_IOMUXC_NAND_DATA00_SIM_M_HADDR2 0x10C 0x374 0x000 0x7 0x0 +#define MX8MM_IOMUXC_NAND_DATA01_RAWNAND_DATA01 0x110 0x378 0x000 0x0 0x0 +#define MX8MM_IOMUXC_NAND_DATA01_QSPI_A_DATA1 0x110 0x378 0x000 0x1 0x0 +#define MX8MM_IOMUXC_NAND_DATA01_GPIO3_IO7 0x110 0x378 0x000 0x5 0x0 +#define MX8MM_IOMUXC_NAND_DATA01_SIM_M_HADDR3 0x110 0x378 0x000 0x7 0x0 +#define MX8MM_IOMUXC_NAND_DATA02_RAWNAND_DATA02 0x114 0x37C 0x000 0x0 0x0 +#define MX8MM_IOMUXC_NAND_DATA02_QSPI_A_DATA2 0x114 0x37C 0x000 0x1 0x0 +#define MX8MM_IOMUXC_NAND_DATA02_GPIO3_IO8 0x114 0x37C 0x000 0x5 0x0 +#define MX8MM_IOMUXC_NAND_DATA02_SIM_M_HADDR4 0x114 0x37C 0x000 0x7 0x0 +#define MX8MM_IOMUXC_NAND_DATA03_RAWNAND_DATA03 0x118 0x380 0x000 0x0 0x0 +#define MX8MM_IOMUXC_NAND_DATA03_QSPI_A_DATA3 0x118 0x380 0x000 0x1 0x0 +#define MX8MM_IOMUXC_NAND_DATA03_GPIO3_IO9 0x118 0x380 0x000 0x5 0x0 +#define MX8MM_IOMUXC_NAND_DATA03_SIM_M_HADDR5 0x118 0x380 0x000 0x7 0x0 +#define MX8MM_IOMUXC_NAND_DATA04_RAWNAND_DATA04 0x11C 0x384 0x000 0x0 0x0 +#define MX8MM_IOMUXC_NAND_DATA04_QSPI_B_DATA0 0x11C 0x384 0x000 0x1 0x0 +#define MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x11C 0x384 0x000 0x2 0x0 +#define MX8MM_IOMUXC_NAND_DATA04_GPIO3_IO10 0x11C 0x384 0x000 0x5 0x0 +#define MX8MM_IOMUXC_NAND_DATA04_SIM_M_HADDR6 0x11C 0x384 0x000 0x7 0x0 +#define MX8MM_IOMUXC_NAND_DATA05_RAWNAND_DATA05 0x120 0x388 0x000 0x0 0x0 +#define MX8MM_IOMUXC_NAND_DATA05_QSPI_B_DATA1 0x120 0x388 0x000 0x1 0x0 +#define MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x120 0x388 0x000 0x2 0x0 +#define MX8MM_IOMUXC_NAND_DATA05_GPIO3_IO11 0x120 0x388 0x000 0x5 0x0 +#define MX8MM_IOMUXC_NAND_DATA05_SIM_M_HADDR7 0x120 0x388 0x000 0x7 0x0 +#define MX8MM_IOMUXC_NAND_DATA06_RAWNAND_DATA06 0x124 0x38C 0x000 0x0 0x0 +#define MX8MM_IOMUXC_NAND_DATA06_QSPI_B_DATA2 0x124 0x38C 0x000 0x1 0x0 +#define MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x124 0x38C 0x000 0x2 0x0 +#define MX8MM_IOMUXC_NAND_DATA06_GPIO3_IO12 0x124 0x38C 0x000 0x5 0x0 +#define MX8MM_IOMUXC_NAND_DATA06_SIM_M_HADDR8 0x124 0x38C 0x000 0x7 0x0 +#define MX8MM_IOMUXC_NAND_DATA07_RAWNAND_DATA07 0x128 0x390 0x000 0x0 0x0 +#define MX8MM_IOMUXC_NAND_DATA07_QSPI_B_DATA3 0x128 0x390 0x000 0x1 0x0 +#define MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x128 0x390 0x000 0x2 0x0 +#define MX8MM_IOMUXC_NAND_DATA07_GPIO3_IO13 0x128 0x390 0x000 0x5 0x0 +#define MX8MM_IOMUXC_NAND_DATA07_SIM_M_HADDR9 0x128 0x390 0x000 0x7 0x0 +#define MX8MM_IOMUXC_NAND_DQS_RAWNAND_DQS 0x12C 0x394 0x000 0x0 0x0 +#define MX8MM_IOMUXC_NAND_DQS_QSPI_A_DQS 0x12C 0x394 0x000 0x1 0x0 +#define MX8MM_IOMUXC_NAND_DQS_GPIO3_IO14 0x12C 0x394 0x000 0x5 0x0 +#define MX8MM_IOMUXC_NAND_DQS_SIM_M_HADDR10 0x12C 0x394 0x000 0x7 0x0 +#define MX8MM_IOMUXC_NAND_RE_B_RAWNAND_RE_B 0x130 0x398 0x000 0x0 0x0 +#define MX8MM_IOMUXC_NAND_RE_B_QSPI_B_DQS 0x130 0x398 0x000 0x1 0x0 +#define MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x130 0x398 0x000 0x2 0x0 +#define MX8MM_IOMUXC_NAND_RE_B_GPIO3_IO15 0x130 0x398 0x000 0x5 0x0 +#define MX8MM_IOMUXC_NAND_RE_B_SIM_M_HADDR11 0x130 0x398 0x000 0x7 0x0 +#define MX8MM_IOMUXC_NAND_READY_B_RAWNAND_READY_B 0x134 0x39C 0x000 0x0 0x0 +#define MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16 0x134 0x39C 0x000 0x5 0x0 +#define MX8MM_IOMUXC_NAND_READY_B_SIM_M_HADDR12 0x134 0x39C 0x000 0x7 0x0 +#define MX8MM_IOMUXC_NAND_WE_B_RAWNAND_WE_B 0x138 0x3A0 0x000 0x0 0x0 +#define MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x138 0x3A0 0x000 0x12 0x0 +#define MX8MM_IOMUXC_NAND_WE_B_GPIO3_IO17 0x138 0x3A0 0x000 0x5 0x0 +#define MX8MM_IOMUXC_NAND_WE_B_SIM_M_HADDR13 0x138 0x3A0 0x000 0x7 0x0 +#define MX8MM_IOMUXC_NAND_WP_B_RAWNAND_WP_B 0x13C 0x3A4 0x000 0x0 0x0 +#define MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x13C 0x3A4 0x000 0x2 0x0 +#define MX8MM_IOMUXC_NAND_WP_B_GPIO3_IO18 0x13C 0x3A4 0x000 0x5 0x0 +#define MX8MM_IOMUXC_NAND_WP_B_SIM_M_HADDR14 0x13C 0x3A4 0x000 0x7 0x0 +#define MX8MM_IOMUXC_SAI5_RXFS_SAI5_RX_SYNC 0x140 0x3A8 0x4E4 0x0 0x0 +#define MX8MM_IOMUXC_SAI5_RXFS_SAI1_TX_DATA0 0x140 0x3A8 0x000 0x1 0x0 +#define MX8MM_IOMUXC_SAI5_RXFS_GPIO3_IO19 0x140 0x3A8 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SAI5_RXC_SAI5_RX_BCLK 0x144 0x3AC 0x4D0 0x0 0x0 +#define MX8MM_IOMUXC_SAI5_RXC_SAI1_TX_DATA1 0x144 0x3AC 0x000 0x1 0x0 +#define MX8MM_IOMUXC_SAI5_RXC_PDM_CLK 0x144 0x3AC 0x000 0x4 0x0 +#define MX8MM_IOMUXC_SAI5_RXC_GPIO3_IO20 0x144 0x3AC 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SAI5_RXD0_SAI5_RX_DATA0 0x148 0x3B0 0x4D4 0x0 0x0 +#define MX8MM_IOMUXC_SAI5_RXD0_SAI1_TX_DATA2 0x148 0x3B0 0x000 0x1 0x0 +#define MX8MM_IOMUXC_SAI5_RXD0_PDM_DATA0 0x148 0x3B0 0x534 0x4 0x0 +#define MX8MM_IOMUXC_SAI5_RXD0_GPIO3_IO21 0x148 0x3B0 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SAI5_RXD1_SAI5_RX_DATA1 0x14C 0x3B4 0x4D8 0x0 0x0 +#define MX8MM_IOMUXC_SAI5_RXD1_SAI1_TX_DATA3 0x14C 0x3B4 0x000 0x1 0x0 +#define MX8MM_IOMUXC_SAI5_RXD1_SAI1_TX_SYNC 0x14C 0x3B4 0x4CC 0x2 0x0 +#define MX8MM_IOMUXC_SAI5_RXD1_SAI5_TX_SYNC 0x14C 0x3B4 0x4EC 0x3 0x0 +#define MX8MM_IOMUXC_SAI5_RXD1_PDM_DATA1 0x14C 0x3B4 0x538 0x4 0x0 +#define MX8MM_IOMUXC_SAI5_RXD1_GPIO3_IO22 0x14C 0x3B4 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SAI5_RXD2_SAI5_RX_DATA2 0x150 0x3B8 0x4DC 0x0 0x0 +#define MX8MM_IOMUXC_SAI5_RXD2_SAI1_TX_DATA4 0x150 0x3B8 0x000 0x1 0x0 +#define MX8MM_IOMUXC_SAI5_RXD2_SAI1_TX_SYNC 0x150 0x3B8 0x4CC 0x2 0x1 +#define MX8MM_IOMUXC_SAI5_RXD2_SAI5_TX_BCLK 0x150 0x3B8 0x4E8 0x3 0x0 +#define MX8MM_IOMUXC_SAI5_RXD2_PDM_DATA2 0x150 0x3B8 0x53c 0x4 0x0 +#define MX8MM_IOMUXC_SAI5_RXD2_GPIO3_IO23 0x150 0x3B8 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SAI5_RXD3_SAI5_RX_DATA3 0x154 0x3BC 0x4E0 0x0 0x0 +#define MX8MM_IOMUXC_SAI5_RXD3_SAI1_TX_DATA5 0x154 0x3BC 0x000 0x1 0x0 +#define MX8MM_IOMUXC_SAI5_RXD3_SAI1_TX_SYNC 0x154 0x3BC 0x4CC 0x2 0x2 +#define MX8MM_IOMUXC_SAI5_RXD3_SAI5_TX_DATA0 0x154 0x3BC 0x000 0x3 0x0 +#define MX8MM_IOMUXC_SAI5_RXD3_PDM_DATA3 0x154 0x3BC 0x540 0x4 0x0 +#define MX8MM_IOMUXC_SAI5_RXD3_GPIO3_IO24 0x154 0x3BC 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SAI5_MCLK_SAI5_MCLK 0x158 0x3C0 0x52C 0x0 0x0 +#define MX8MM_IOMUXC_SAI5_MCLK_SAI1_TX_BCLK 0x158 0x3C0 0x4C8 0x1 0x0 +#define MX8MM_IOMUXC_SAI5_MCLK_SAI4_MCLK 0x158 0x3C0 0x000 0x2 0x0 +#define MX8MM_IOMUXC_SAI5_MCLK_GPIO3_IO25 0x158 0x3C0 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SAI5_MCLK_CCMSRCGPCMIX_TESTER_ACK 0x158 0x3C0 0x000 0x6 0x0 +#define MX8MM_IOMUXC_SAI1_RXFS_SAI1_RX_SYNC 0x15C 0x3C4 0x4C4 0x0 0x0 +#define MX8MM_IOMUXC_SAI1_RXFS_SAI5_RX_SYNC 0x15C 0x3C4 0x4E4 0x1 0x1 +#define MX8MM_IOMUXC_SAI1_RXFS_CORESIGHT_TRACE_CLK 0x15C 0x3C4 0x000 0x4 0x0 +#define MX8MM_IOMUXC_SAI1_RXFS_GPIO4_IO0 0x15C 0x3C4 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SAI1_RXFS_SIM_M_HADDR15 0x15C 0x3C4 0x000 0x7 0x0 +#define MX8MM_IOMUXC_SAI1_RXC_SAI1_RX_BCLK 0x160 0x3C8 0x000 0x0 0x0 +#define MX8MM_IOMUXC_SAI1_RXC_SAI5_RX_BCLK 0x160 0x3C8 0x4D0 0x1 0x1 +#define MX8MM_IOMUXC_SAI1_RXC_CORESIGHT_TRACE_CTL 0x160 0x3C8 0x000 0x4 0x0 +#define MX8MM_IOMUXC_SAI1_RXC_GPIO4_IO1 0x160 0x3C8 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SAI1_RXC_SIM_M_HADDR16 0x160 0x3C8 0x000 0x7 0x0 +#define MX8MM_IOMUXC_SAI1_RXD0_SAI1_RX_DATA0 0x164 0x3CC 0x000 0x0 0x0 +#define MX8MM_IOMUXC_SAI1_RXD0_SAI5_RX_DATA0 0x164 0x3CC 0x4D4 0x1 0x1 +#define MX8MM_IOMUXC_SAI1_RXD0_PDM_DATA0 0x164 0x3CC 0x534 0x3 0x1 +#define MX8MM_IOMUXC_SAI1_RXD0_CORESIGHT_TRACE0 0x164 0x3CC 0x000 0x4 0x0 +#define MX8MM_IOMUXC_SAI1_RXD0_GPIO4_IO2 0x164 0x3CC 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SAI1_RXD0_CCMSRCGPCMIX_BOOT_CFG0 0x164 0x3CC 0x000 0x6 0x0 +#define MX8MM_IOMUXC_SAI1_RXD0_SIM_M_HADDR17 0x164 0x3CC 0x000 0x7 0x0 +#define MX8MM_IOMUXC_SAI1_RXD1_SAI1_RX_DATA1 0x168 0x3D0 0x000 0x0 0x0 +#define MX8MM_IOMUXC_SAI1_RXD1_SAI5_RX_DATA1 0x168 0x3D0 0x4D8 0x1 0x1 +#define MX8MM_IOMUXC_SAI1_RXD1_PDM_DATA1 0x168 0x3D0 0x538 0x3 0x1 +#define MX8MM_IOMUXC_SAI1_RXD1_CORESIGHT_TRACE1 0x168 0x3D0 0x000 0x4 0x0 +#define MX8MM_IOMUXC_SAI1_RXD1_GPIO4_IO3 0x168 0x3D0 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SAI1_RXD1_CCMSRCGPCMIX_BOOT_CFG1 0x168 0x3D0 0x000 0x6 0x0 +#define MX8MM_IOMUXC_SAI1_RXD1_SIM_M_HADDR18 0x168 0x3D0 0x000 0x7 0x0 +#define MX8MM_IOMUXC_SAI1_RXD2_SAI1_RX_DATA2 0x16C 0x3D4 0x000 0x0 0x0 +#define MX8MM_IOMUXC_SAI1_RXD2_SAI5_RX_DATA2 0x16C 0x3D4 0x4DC 0x1 0x1 +#define MX8MM_IOMUXC_SAI1_RXD2_PDM_DATA2 0x16C 0x3D4 0x53C 0x3 0x1 +#define MX8MM_IOMUXC_SAI1_RXD2_CORESIGHT_TRACE2 0x16C 0x3D4 0x000 0x4 0x0 +#define MX8MM_IOMUXC_SAI1_RXD2_GPIO4_IO4 0x16C 0x3D4 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SAI1_RXD2_CCMSRCGPCMIX_BOOT_CFG2 0x16C 0x3D4 0x000 0x6 0x0 +#define MX8MM_IOMUXC_SAI1_RXD2_SIM_M_HADDR19 0x16C 0x3D4 0x000 0x7 0x0 +#define MX8MM_IOMUXC_SAI1_RXD3_SAI1_RX_DATA3 0x170 0x3D8 0x4E0 0x0 0x1 +#define MX8MM_IOMUXC_SAI1_RXD3_SAI5_RX_DATA3 0x170 0x3D8 0x000 0x1 0x0 +#define MX8MM_IOMUXC_SAI1_RXD3_PDM_DATA3 0x170 0x3D8 0x540 0x3 0x1 +#define MX8MM_IOMUXC_SAI1_RXD3_CORESIGHT_TRACE3 0x170 0x3D8 0x000 0x4 0x0 +#define MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5 0x170 0x3D8 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SAI1_RXD3_CCMSRCGPCMIX_BOOT_CFG3 0x170 0x3D8 0x000 0x6 0x0 +#define MX8MM_IOMUXC_SAI1_RXD3_SIM_M_HADDR20 0x170 0x3D8 0x000 0x7 0x0 +#define MX8MM_IOMUXC_SAI1_RXD4_SAI1_RX_DATA4 0x174 0x3DC 0x000 0x0 0x0 +#define MX8MM_IOMUXC_SAI1_RXD4_SAI6_TX_BCLK 0x174 0x3DC 0x51C 0x1 0x0 +#define MX8MM_IOMUXC_SAI1_RXD4_SAI6_RX_BCLK 0x174 0x3DC 0x510 0x2 0x0 +#define MX8MM_IOMUXC_SAI1_RXD4_CORESIGHT_TRACE4 0x174 0x3DC 0x000 0x4 0x0 +#define MX8MM_IOMUXC_SAI1_RXD4_GPIO4_IO6 0x174 0x3DC 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SAI1_RXD4_CCMSRCGPCMIX_BOOT_CFG4 0x174 0x3DC 0x000 0x6 0x0 +#define MX8MM_IOMUXC_SAI1_RXD4_SIM_M_HADDR21 0x174 0x3DC 0x000 0x7 0x0 +#define MX8MM_IOMUXC_SAI1_RXD5_SAI1_RX_DATA5 0x178 0x3E0 0x000 0x0 0x0 +#define MX8MM_IOMUXC_SAI1_RXD5_SAI6_TX_DATA0 0x178 0x3E0 0x000 0x1 0x0 +#define MX8MM_IOMUXC_SAI1_RXD5_SAI6_RX_DATA0 0x178 0x3E0 0x514 0x2 0x0 +#define MX8MM_IOMUXC_SAI1_RXD5_SAI1_RX_SYNC 0x178 0x3E0 0x4C4 0x3 0x1 +#define MX8MM_IOMUXC_SAI1_RXD5_CORESIGHT_TRACE5 0x178 0x3E0 0x000 0x4 0x0 +#define MX8MM_IOMUXC_SAI1_RXD5_GPIO4_IO7 0x178 0x3E0 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SAI1_RXD5_CCMSRCGPCMIX_BOOT_CFG5 0x178 0x3E0 0x000 0x6 0x0 +#define MX8MM_IOMUXC_SAI1_RXD5_SIM_M_HADDR22 0x178 0x3E0 0x000 0x7 0x0 +#define MX8MM_IOMUXC_SAI1_RXD6_SAI1_RX_DATA6 0x17C 0x3E4 0x520 0x0 0x0 +#define MX8MM_IOMUXC_SAI1_RXD6_SAI6_TX_SYNC 0x17C 0x3E4 0x000 0x1 0x0 +#define MX8MM_IOMUXC_SAI1_RXD6_SAI6_RX_SYNC 0x17C 0x3E4 0x518 0x2 0x0 +#define MX8MM_IOMUXC_SAI1_RXD6_CORESIGHT_TRACE6 0x17C 0x3E4 0x000 0x4 0x0 +#define MX8MM_IOMUXC_SAI1_RXD6_GPIO4_IO8 0x17C 0x3E4 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SAI1_RXD6_CCMSRCGPCMIX_BOOT_CFG6 0x17C 0x3E4 0x000 0x6 0x0 +#define MX8MM_IOMUXC_SAI1_RXD6_SIM_M_HADDR23 0x17C 0x3E4 0x000 0x7 0x0 +#define MX8MM_IOMUXC_SAI1_RXD7_SAI1_RX_DATA7 0x180 0x3E8 0x000 0x0 0x0 +#define MX8MM_IOMUXC_SAI1_RXD7_SAI6_MCLK 0x180 0x3E8 0x530 0x1 0x0 +#define MX8MM_IOMUXC_SAI1_RXD7_SAI1_TX_SYNC 0x180 0x3E8 0x4CC 0x2 0x4 +#define MX8MM_IOMUXC_SAI1_RXD7_SAI1_TX_DATA4 0x180 0x3E8 0x000 0x3 0x0 +#define MX8MM_IOMUXC_SAI1_RXD7_CORESIGHT_TRACE7 0x180 0x3E8 0x000 0x4 0x0 +#define MX8MM_IOMUXC_SAI1_RXD7_GPIO4_IO9 0x180 0x3E8 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SAI1_RXD7_CCMSRCGPCMIX_BOOT_CFG7 0x180 0x3E8 0x000 0x6 0x0 +#define MX8MM_IOMUXC_SAI1_RXD7_SIM_M_HADDR24 0x180 0x3E8 0x000 0x7 0x0 +#define MX8MM_IOMUXC_SAI1_TXFS_SAI1_TX_SYNC 0x184 0x3EC 0x4CC 0x0 0x3 +#define MX8MM_IOMUXC_SAI1_TXFS_SAI5_TX_SYNC 0x184 0x3EC 0x4EC 0x1 0x1 +#define MX8MM_IOMUXC_SAI1_TXFS_CORESIGHT_EVENTO 0x184 0x3EC 0x000 0x4 0x0 +#define MX8MM_IOMUXC_SAI1_TXFS_GPIO4_IO10 0x184 0x3EC 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SAI1_TXFS_SIM_M_HADDR25 0x184 0x3EC 0x000 0x7 0x0 +#define MX8MM_IOMUXC_SAI1_TXC_SAI1_TX_BCLK 0x188 0x3F0 0x4C8 0x0 0x1 +#define MX8MM_IOMUXC_SAI1_TXC_SAI5_TX_BCLK 0x188 0x3F0 0x4E8 0x1 0x1 +#define MX8MM_IOMUXC_SAI1_TXC_CORESIGHT_EVENTI 0x188 0x3F0 0x000 0x4 0x0 +#define MX8MM_IOMUXC_SAI1_TXC_GPIO4_IO11 0x188 0x3F0 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SAI1_TXC_SIM_M_HADDR26 0x188 0x3F0 0x000 0x7 0x0 +#define MX8MM_IOMUXC_SAI1_TXD0_SAI1_TX_DATA0 0x18C 0x3F4 0x000 0x0 0x0 +#define MX8MM_IOMUXC_SAI1_TXD0_SAI5_TX_DATA0 0x18C 0x3F4 0x000 0x1 0x0 +#define MX8MM_IOMUXC_SAI1_TXD0_CORESIGHT_TRACE8 0x18C 0x3F4 0x000 0x4 0x0 +#define MX8MM_IOMUXC_SAI1_TXD0_GPIO4_IO12 0x18C 0x3F4 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SAI1_TXD0_CCMSRCGPCMIX_BOOT_CFG8 0x18C 0x3F4 0x000 0x6 0x0 +#define MX8MM_IOMUXC_SAI1_TXD0_SIM_M_HADDR27 0x18C 0x3F4 0x000 0x7 0x0 +#define MX8MM_IOMUXC_SAI1_TXD1_SAI1_TX_DATA1 0x190 0x3F8 0x000 0x0 0x0 +#define MX8MM_IOMUXC_SAI1_TXD1_SAI5_TX_DATA1 0x190 0x3F8 0x000 0x1 0x0 +#define MX8MM_IOMUXC_SAI1_TXD1_CORESIGHT_TRACE9 0x190 0x3F8 0x000 0x4 0x0 +#define MX8MM_IOMUXC_SAI1_TXD1_GPIO4_IO13 0x190 0x3F8 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SAI1_TXD1_CCMSRCGPCMIX_BOOT_CFG9 0x190 0x3F8 0x000 0x6 0x0 +#define MX8MM_IOMUXC_SAI1_TXD1_SIM_M_HADDR28 0x190 0x3F8 0x000 0x7 0x0 +#define MX8MM_IOMUXC_SAI1_TXD2_SAI1_TX_DATA2 0x194 0x3FC 0x000 0x0 0x0 +#define MX8MM_IOMUXC_SAI1_TXD2_SAI5_TX_DATA2 0x194 0x3FC 0x000 0x1 0x0 +#define MX8MM_IOMUXC_SAI1_TXD2_CORESIGHT_TRACE10 0x194 0x3FC 0x000 0x4 0x0 +#define MX8MM_IOMUXC_SAI1_TXD2_GPIO4_IO14 0x194 0x3FC 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SAI1_TXD2_CCMSRCGPCMIX_BOOT_CFG10 0x194 0x3FC 0x000 0x6 0x0 +#define MX8MM_IOMUXC_SAI1_TXD2_SIM_M_HADDR29 0x194 0x3FC 0x000 0x7 0x0 +#define MX8MM_IOMUXC_SAI1_TXD3_SAI1_TX_DATA3 0x198 0x400 0x000 0x0 0x0 +#define MX8MM_IOMUXC_SAI1_TXD3_SAI5_TX_DATA3 0x198 0x400 0x000 0x1 0x0 +#define MX8MM_IOMUXC_SAI1_TXD3_CORESIGHT_TRACE11 0x198 0x400 0x000 0x4 0x0 +#define MX8MM_IOMUXC_SAI1_TXD3_GPIO4_IO15 0x198 0x400 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SAI1_TXD3_CCMSRCGPCMIX_BOOT_CFG11 0x198 0x400 0x000 0x6 0x0 +#define MX8MM_IOMUXC_SAI1_TXD3_SIM_M_HADDR30 0x198 0x400 0x000 0x7 0x0 +#define MX8MM_IOMUXC_SAI1_TXD4_SAI1_TX_DATA4 0x19C 0x404 0x000 0x0 0x0 +#define MX8MM_IOMUXC_SAI1_TXD4_SAI6_RX_BCLK 0x19C 0x404 0x510 0x1 0x1 +#define MX8MM_IOMUXC_SAI1_TXD4_SAI6_TX_BCLK 0x19C 0x404 0x51C 0x2 0x1 +#define MX8MM_IOMUXC_SAI1_TXD4_CORESIGHT_TRACE12 0x19C 0x404 0x000 0x4 0x0 +#define MX8MM_IOMUXC_SAI1_TXD4_GPIO4_IO16 0x19C 0x404 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SAI1_TXD4_CCMSRCGPCMIX_BOOT_CFG12 0x19C 0x404 0x000 0x6 0x0 +#define MX8MM_IOMUXC_SAI1_TXD4_SIM_M_HADDR31 0x19C 0x404 0x000 0x7 0x0 +#define MX8MM_IOMUXC_SAI1_TXD5_SAI1_TX_DATA5 0x1A0 0x408 0x000 0x0 0x0 +#define MX8MM_IOMUXC_SAI1_TXD5_SAI6_RX_DATA0 0x1A0 0x408 0x514 0x1 0x1 +#define MX8MM_IOMUXC_SAI1_TXD5_SAI6_TX_DATA0 0x1A0 0x408 0x000 0x2 0x0 +#define MX8MM_IOMUXC_SAI1_TXD5_CORESIGHT_TRACE13 0x1A0 0x408 0x000 0x4 0x0 +#define MX8MM_IOMUXC_SAI1_TXD5_GPIO4_IO17 0x1A0 0x408 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SAI1_TXD5_CCMSRCGPCMIX_BOOT_CFG13 0x1A0 0x408 0x000 0x6 0x0 +#define MX8MM_IOMUXC_SAI1_TXD5_SIM_M_HBURST0 0x1A0 0x408 0x000 0x7 0x0 +#define MX8MM_IOMUXC_SAI1_TXD6_SAI1_TX_DATA6 0x1A4 0x40C 0x000 0x0 0x0 +#define MX8MM_IOMUXC_SAI1_TXD6_SAI6_RX_SYNC 0x1A4 0x40C 0x518 0x1 0x1 +#define MX8MM_IOMUXC_SAI1_TXD6_SAI6_TX_SYNC 0x1A4 0x40C 0x520 0x2 0x1 +#define MX8MM_IOMUXC_SAI1_TXD6_CORESIGHT_TRACE14 0x1A4 0x40C 0x000 0x4 0x0 +#define MX8MM_IOMUXC_SAI1_TXD6_GPIO4_IO18 0x1A4 0x40C 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SAI1_TXD6_CCMSRCGPCMIX_BOOT_CFG14 0x1A4 0x40C 0x000 0x6 0x0 +#define MX8MM_IOMUXC_SAI1_TXD6_SIM_M_HBURST1 0x1A4 0x40C 0x000 0x7 0x0 +#define MX8MM_IOMUXC_SAI1_TXD7_SAI1_TX_DATA7 0x1A8 0x410 0x000 0x0 0x0 +#define MX8MM_IOMUXC_SAI1_TXD7_SAI6_MCLK 0x1A8 0x410 0x530 0x1 0x1 +#define MX8MM_IOMUXC_SAI1_TXD7_PDM_CLK 0x1A8 0x410 0x000 0x3 0x0 +#define MX8MM_IOMUXC_SAI1_TXD7_CORESIGHT_TRACE15 0x1A8 0x410 0x000 0x4 0x0 +#define MX8MM_IOMUXC_SAI1_TXD7_GPIO4_IO19 0x1A8 0x410 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SAI1_TXD7_CCMSRCGPCMIX_BOOT_CFG15 0x1A8 0x410 0x000 0x6 0x0 +#define MX8MM_IOMUXC_SAI1_TXD7_SIM_M_HBURST2 0x1A8 0x410 0x000 0x7 0x0 +#define MX8MM_IOMUXC_SAI1_MCLK_SAI1_MCLK 0x1AC 0x414 0x000 0x0 0x0 +#define MX8MM_IOMUXC_SAI1_MCLK_SAI5_MCLK 0x1AC 0x414 0x52C 0x1 0x1 +#define MX8MM_IOMUXC_SAI1_MCLK_SAI1_TX_BCLK 0x1AC 0x414 0x4C8 0x2 0x2 +#define MX8MM_IOMUXC_SAI1_MCLK_PDM_CLK 0x1AC 0x414 0x000 0x3 0x0 +#define MX8MM_IOMUXC_SAI1_MCLK_GPIO4_IO20 0x1AC 0x414 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SAI1_MCLK_SIM_M_HRESP 0x1AC 0x414 0x000 0x7 0x0 +#define MX8MM_IOMUXC_SAI2_RXFS_SAI2_RX_SYNC 0x1B0 0x418 0x000 0x0 0x0 +#define MX8MM_IOMUXC_SAI2_RXFS_SAI5_TX_SYNC 0x1B0 0x418 0x4EC 0x1 0x2 +#define MX8MM_IOMUXC_SAI2_RXFS_GPIO4_IO21 0x1B0 0x418 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SAI2_RXFS_SIM_M_HSIZE0 0x1B0 0x418 0x000 0x7 0x0 +#define MX8MM_IOMUXC_SAI2_RXC_SAI2_RX_BCLK 0x1B4 0x41C 0x000 0x0 0x0 +#define MX8MM_IOMUXC_SAI2_RXC_SAI5_TX_BCLK 0x1B4 0x41C 0x4E8 0x1 0x2 +#define MX8MM_IOMUXC_SAI2_RXC_GPIO4_IO22 0x1B4 0x41C 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SAI2_RXC_SIM_M_HSIZE1 0x1B4 0x41C 0x000 0x7 0x0 +#define MX8MM_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0 0x1B8 0x420 0x000 0x0 0x0 +#define MX8MM_IOMUXC_SAI2_RXD0_SAI5_TX_DATA0 0x1B8 0x420 0x000 0x1 0x0 +#define MX8MM_IOMUXC_SAI2_RXD0_GPIO4_IO23 0x1B8 0x420 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SAI2_RXD0_SIM_M_HSIZE2 0x1B8 0x420 0x000 0x7 0x0 +#define MX8MM_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC 0x1BC 0x424 0x000 0x0 0x0 +#define MX8MM_IOMUXC_SAI2_TXFS_SAI5_TX_DATA1 0x1BC 0x424 0x000 0x1 0x0 +#define MX8MM_IOMUXC_SAI2_TXFS_GPIO4_IO24 0x1BC 0x424 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SAI2_TXFS_SIM_M_HWRITE 0x1BC 0x424 0x000 0x7 0x0 +#define MX8MM_IOMUXC_SAI2_TXC_SAI2_TX_BCLK 0x1C0 0x428 0x000 0x0 0x0 +#define MX8MM_IOMUXC_SAI2_TXC_SAI5_TX_DATA2 0x1C0 0x428 0x000 0x1 0x0 +#define MX8MM_IOMUXC_SAI2_TXC_GPIO4_IO25 0x1C0 0x428 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SAI2_TXC_SIM_M_HREADYOUT 0x1C0 0x428 0x000 0x7 0x0 +#define MX8MM_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0 0x1C4 0x42C 0x000 0x0 0x0 +#define MX8MM_IOMUXC_SAI2_TXD0_SAI5_TX_DATA3 0x1C4 0x42C 0x000 0x1 0x0 +#define MX8MM_IOMUXC_SAI2_TXD0_GPIO4_IO26 0x1C4 0x42C 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SAI2_TXD0_TPSMP_CLK 0x1C4 0x42C 0x000 0x7 0x0 +#define MX8MM_IOMUXC_SAI2_MCLK_SAI2_MCLK 0x1C8 0x430 0x000 0x0 0x0 +#define MX8MM_IOMUXC_SAI2_MCLK_SAI5_MCLK 0x1C8 0x430 0x52C 0x1 0x2 +#define MX8MM_IOMUXC_SAI2_MCLK_GPIO4_IO27 0x1C8 0x430 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SAI2_MCLK_TPSMP_HDATA_DIR 0x1C8 0x430 0x000 0x7 0x0 +#define MX8MM_IOMUXC_SAI3_RXFS_SAI3_RX_SYNC 0x1CC 0x434 0x000 0x0 0x0 +#define MX8MM_IOMUXC_SAI3_RXFS_GPT1_CAPTURE1 0x1CC 0x434 0x000 0x1 0x0 +#define MX8MM_IOMUXC_SAI3_RXFS_SAI5_RX_SYNC 0x1CC 0x434 0x4E4 0x2 0x2 +#define MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28 0x1CC 0x434 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SAI3_RXFS_TPSMP_HTRANS0 0x1CC 0x434 0x000 0x7 0x0 +#define MX8MM_IOMUXC_SAI3_RXC_SAI3_RX_BCLK 0x1D0 0x438 0x000 0x0 0x0 +#define MX8MM_IOMUXC_SAI3_RXC_GPT1_CAPTURE2 0x1D0 0x438 0x000 0x1 0x0 +#define MX8MM_IOMUXC_SAI3_RXC_SAI5_RX_BCLK 0x1D0 0x438 0x4D0 0x2 0x2 +#define MX8MM_IOMUXC_SAI3_RXC_GPIO4_IO29 0x1D0 0x438 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SAI3_RXC_TPSMP_HTRANS1 0x1D0 0x438 0x000 0x7 0x0 +#define MX8MM_IOMUXC_SAI3_RXD_SAI3_RX_DATA0 0x1D4 0x43C 0x000 0x0 0x0 +#define MX8MM_IOMUXC_SAI3_RXD_GPT1_COMPARE1 0x1D4 0x43C 0x000 0x1 0x0 +#define MX8MM_IOMUXC_SAI3_RXD_SAI5_RX_DATA0 0x1D4 0x43C 0x4D4 0x2 0x2 +#define MX8MM_IOMUXC_SAI3_RXD_GPIO4_IO30 0x1D4 0x43C 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SAI3_RXD_TPSMP_HDATA0 0x1D4 0x43C 0x000 0x7 0x0 +#define MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0x1D8 0x440 0x000 0x0 0x0 +#define MX8MM_IOMUXC_SAI3_TXFS_GPT1_CLK 0x1D8 0x440 0x000 0x1 0x0 +#define MX8MM_IOMUXC_SAI3_TXFS_SAI5_RX_DATA1 0x1D8 0x440 0x4D8 0x2 0x2 +#define MX8MM_IOMUXC_SAI3_TXFS_GPIO4_IO31 0x1D8 0x440 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SAI3_TXFS_TPSMP_HDATA1 0x1D8 0x440 0x000 0x7 0x0 +#define MX8MM_IOMUXC_SAI3_TXC_SAI3_TX_BCLK 0x1DC 0x444 0x000 0x0 0x0 +#define MX8MM_IOMUXC_SAI3_TXC_GPT1_COMPARE2 0x1DC 0x444 0x000 0x1 0x0 +#define MX8MM_IOMUXC_SAI3_TXC_SAI5_RX_DATA2 0x1DC 0x444 0x4DC 0x2 0x2 +#define MX8MM_IOMUXC_SAI3_TXC_GPIO5_IO0 0x1DC 0x444 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SAI3_TXC_TPSMP_HDATA2 0x1DC 0x444 0x000 0x7 0x0 +#define MX8MM_IOMUXC_SAI3_TXD_SAI3_TX_DATA0 0x1E0 0x448 0x000 0x0 0x0 +#define MX8MM_IOMUXC_SAI3_TXD_GPT1_COMPARE3 0x1E0 0x448 0x000 0x1 0x0 +#define MX8MM_IOMUXC_SAI3_TXD_SAI5_RX_DATA3 0x1E0 0x448 0x4E0 0x2 0x2 +#define MX8MM_IOMUXC_SAI3_TXD_GPIO5_IO1 0x1E0 0x448 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SAI3_TXD_TPSMP_HDATA3 0x1E0 0x448 0x000 0x7 0x0 +#define MX8MM_IOMUXC_SAI3_MCLK_SAI3_MCLK 0x1E4 0x44C 0x000 0x0 0x0 +#define MX8MM_IOMUXC_SAI3_MCLK_PWM4_OUT 0x1E4 0x44C 0x000 0x1 0x0 +#define MX8MM_IOMUXC_SAI3_MCLK_SAI5_MCLK 0x1E4 0x44C 0x52C 0x2 0x3 +#define MX8MM_IOMUXC_SAI3_MCLK_GPIO5_IO2 0x1E4 0x44C 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SAI3_MCLK_TPSMP_HDATA4 0x1E4 0x44C 0x000 0x7 0x0 +#define MX8MM_IOMUXC_SPDIF_TX_SPDIF1_OUT 0x1E8 0x450 0x000 0x0 0x0 +#define MX8MM_IOMUXC_SPDIF_TX_PWM3_OUT 0x1E8 0x450 0x000 0x1 0x0 +#define MX8MM_IOMUXC_SPDIF_TX_GPIO5_IO3 0x1E8 0x450 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SPDIF_TX_TPSMP_HDATA5 0x1E8 0x450 0x000 0x7 0x0 +#define MX8MM_IOMUXC_SPDIF_RX_SPDIF1_IN 0x1EC 0x454 0x000 0x0 0x0 +#define MX8MM_IOMUXC_SPDIF_RX_PWM2_OUT 0x1EC 0x454 0x000 0x1 0x0 +#define MX8MM_IOMUXC_SPDIF_RX_GPIO5_IO4 0x1EC 0x454 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SPDIF_RX_TPSMP_HDATA6 0x1EC 0x454 0x000 0x7 0x0 +#define MX8MM_IOMUXC_SPDIF_EXT_CLK_SPDIF1_EXT_CLK 0x1F0 0x458 0x000 0x0 0x0 +#define MX8MM_IOMUXC_SPDIF_EXT_CLK_PWM1_OUT 0x1F0 0x458 0x000 0x1 0x0 +#define MX8MM_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5 0x1F0 0x458 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SPDIF_EXT_CLK_TPSMP_HDATA7 0x1F0 0x458 0x000 0x7 0x0 +#define MX8MM_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK 0x1F4 0x45C 0x000 0x0 0x0 +#define MX8MM_IOMUXC_ECSPI1_SCLK_UART3_DCE_RX 0x1F4 0x45C 0x504 0x1 0x0 +#define MX8MM_IOMUXC_ECSPI1_SCLK_UART3_DTE_TX 0x1F4 0x45C 0x000 0x1 0x0 +#define MX8MM_IOMUXC_ECSPI1_SCLK_GPIO5_IO6 0x1F4 0x45C 0x000 0x5 0x0 +#define MX8MM_IOMUXC_ECSPI1_SCLK_TPSMP_HDATA8 0x1F4 0x45C 0x000 0x7 0x0 +#define MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI 0x1F8 0x460 0x000 0x0 0x0 +#define MX8MM_IOMUXC_ECSPI1_MOSI_UART3_DCE_TX 0x1F8 0x460 0x000 0x1 0x0 +#define MX8MM_IOMUXC_ECSPI1_MOSI_UART3_DTE_RX 0x1F8 0x460 0x504 0x1 0x1 +#define MX8MM_IOMUXC_ECSPI1_MOSI_GPIO5_IO7 0x1F8 0x460 0x000 0x5 0x0 +#define MX8MM_IOMUXC_ECSPI1_MOSI_TPSMP_HDATA9 0x1F8 0x460 0x000 0x7 0x0 +#define MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO 0x1FC 0x464 0x000 0x0 0x0 +#define MX8MM_IOMUXC_ECSPI1_MISO_UART3_DCE_CTS_B 0x1FC 0x464 0x000 0x1 0x0 +#define MX8MM_IOMUXC_ECSPI1_MISO_UART3_DTE_RTS_B 0x1FC 0x464 0x500 0x1 0x0 +#define MX8MM_IOMUXC_ECSPI1_MISO_GPIO5_IO8 0x1FC 0x464 0x000 0x5 0x0 +#define MX8MM_IOMUXC_ECSPI1_MISO_TPSMP_HDATA10 0x1FC 0x464 0x000 0x7 0x0 +#define MX8MM_IOMUXC_ECSPI1_SS0_ECSPI1_SS0 0x200 0x468 0x000 0x0 0x0 +#define MX8MM_IOMUXC_ECSPI1_SS0_UART3_DCE_RTS_B 0x200 0x468 0x500 0x1 0x1 +#define MX8MM_IOMUXC_ECSPI1_SS0_UART3_DTE_CTS_B 0x200 0x468 0x000 0x1 0x0 +#define MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x200 0x468 0x000 0x5 0x0 +#define MX8MM_IOMUXC_ECSPI1_SS0_TPSMP_HDATA11 0x200 0x468 0x000 0x7 0x0 +#define MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0x204 0x46C 0x000 0x0 0x0 +#define MX8MM_IOMUXC_ECSPI2_SCLK_UART4_DCE_RX 0x204 0x46C 0x50C 0x1 0x0 +#define MX8MM_IOMUXC_ECSPI2_SCLK_UART4_DTE_TX 0x204 0x46C 0x000 0x1 0x0 +#define MX8MM_IOMUXC_ECSPI2_SCLK_GPIO5_IO10 0x204 0x46C 0x000 0x5 0x0 +#define MX8MM_IOMUXC_ECSPI2_SCLK_TPSMP_HDATA12 0x204 0x46C 0x000 0x7 0x0 +#define MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0x208 0x470 0x000 0x0 0x0 +#define MX8MM_IOMUXC_ECSPI2_MOSI_UART4_DCE_TX 0x208 0x470 0x000 0x1 0x0 +#define MX8MM_IOMUXC_ECSPI2_MOSI_UART4_DTE_RX 0x208 0x470 0x50C 0x1 0x1 +#define MX8MM_IOMUXC_ECSPI2_MOSI_GPIO5_IO11 0x208 0x470 0x000 0x5 0x0 +#define MX8MM_IOMUXC_ECSPI2_MOSI_TPSMP_HDATA13 0x208 0x470 0x000 0x7 0x0 +#define MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0x20C 0x474 0x000 0x0 0x0 +#define MX8MM_IOMUXC_ECSPI2_MISO_UART4_DCE_CTS_B 0x20C 0x474 0x000 0x1 0x0 +#define MX8MM_IOMUXC_ECSPI2_MISO_UART4_DTE_RTS_B 0x20C 0x474 0x508 0x1 0x0 +#define MX8MM_IOMUXC_ECSPI2_MISO_GPIO5_IO12 0x20C 0x474 0x000 0x5 0x0 +#define MX8MM_IOMUXC_ECSPI2_MISO_TPSMP_HDATA14 0x20C 0x474 0x000 0x7 0x0 +#define MX8MM_IOMUXC_ECSPI2_SS0_ECSPI2_SS0 0x210 0x478 0x000 0x0 0x0 +#define MX8MM_IOMUXC_ECSPI2_SS0_UART4_DCE_RTS_B 0x210 0x478 0x508 0x1 0x1 +#define MX8MM_IOMUXC_ECSPI2_SS0_UART4_DTE_CTS_B 0x210 0x478 0x000 0x1 0x0 +#define MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0x210 0x478 0x000 0x5 0x0 +#define MX8MM_IOMUXC_ECSPI2_SS0_TPSMP_HDATA15 0x210 0x478 0x000 0x7 0x0 +#define MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x214 0x47C 0x000 0x0 0x0 +#define MX8MM_IOMUXC_I2C1_SCL_ENET1_MDC 0x214 0x47C 0x000 0x1 0x0 +#define MX8MM_IOMUXC_I2C1_SCL_GPIO5_IO14 0x214 0x47C 0x000 0x5 0x0 +#define MX8MM_IOMUXC_I2C1_SCL_TPSMP_HDATA16 0x214 0x47C 0x000 0x7 0x0 +#define MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x218 0x480 0x000 0x0 0x0 +#define MX8MM_IOMUXC_I2C1_SDA_ENET1_MDIO 0x218 0x480 0x4C0 0x1 0x2 +#define MX8MM_IOMUXC_I2C1_SDA_GPIO5_IO15 0x218 0x480 0x000 0x5 0x0 +#define MX8MM_IOMUXC_I2C1_SDA_TPSMP_HDATA17 0x218 0x480 0x000 0x7 0x0 +#define MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL 0x21C 0x484 0x000 0x0 0x0 +#define MX8MM_IOMUXC_I2C2_SCL_ENET1_1588_EVENT1_IN 0x21C 0x484 0x000 0x1 0x0 +#define MX8MM_IOMUXC_I2C2_SCL_GPIO5_IO16 0x21C 0x484 0x000 0x5 0x0 +#define MX8MM_IOMUXC_I2C2_SCL_TPSMP_HDATA18 0x21C 0x484 0x000 0x7 0x0 +#define MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA 0x220 0x488 0x000 0x0 0x0 +#define MX8MM_IOMUXC_I2C2_SDA_ENET1_1588_EVENT1_OUT 0x220 0x488 0x000 0x1 0x0 +#define MX8MM_IOMUXC_I2C2_SDA_GPIO5_IO17 0x220 0x488 0x000 0x5 0x0 +#define MX8MM_IOMUXC_I2C2_SDA_TPSMP_HDATA19 0x220 0x488 0x000 0x7 0x0 +#define MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL 0x224 0x48C 0x000 0x0 0x0 +#define MX8MM_IOMUXC_I2C3_SCL_PWM4_OUT 0x224 0x48C 0x000 0x1 0x0 +#define MX8MM_IOMUXC_I2C3_SCL_GPT2_CLK 0x224 0x48C 0x000 0x2 0x0 +#define MX8MM_IOMUXC_I2C3_SCL_GPIO5_IO18 0x224 0x48C 0x000 0x5 0x0 +#define MX8MM_IOMUXC_I2C3_SCL_TPSMP_HDATA20 0x224 0x48C 0x000 0x7 0x0 +#define MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x228 0x490 0x000 0x0 0x0 +#define MX8MM_IOMUXC_I2C3_SDA_PWM3_OUT 0x228 0x490 0x000 0x1 0x0 +#define MX8MM_IOMUXC_I2C3_SDA_GPT3_CLK 0x228 0x490 0x000 0x2 0x0 +#define MX8MM_IOMUXC_I2C3_SDA_GPIO5_IO19 0x228 0x490 0x000 0x5 0x0 +#define MX8MM_IOMUXC_I2C3_SDA_TPSMP_HDATA21 0x228 0x490 0x000 0x7 0x0 +#define MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL 0x22C 0x494 0x000 0x0 0x0 +#define MX8MM_IOMUXC_I2C4_SCL_PWM2_OUT 0x22C 0x494 0x000 0x1 0x0 +#define MX8MM_IOMUXC_I2C4_SCL_PCIE1_CLKREQ_B 0x22C 0x494 0x524 0x12 0x0 +#define MX8MM_IOMUXC_I2C4_SCL_GPIO5_IO20 0x22C 0x494 0x000 0x5 0x0 +#define MX8MM_IOMUXC_I2C4_SCL_TPSMP_HDATA22 0x22C 0x494 0x000 0x7 0x0 +#define MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA 0x230 0x498 0x000 0x0 0x0 +#define MX8MM_IOMUXC_I2C4_SDA_PWM1_OUT 0x230 0x498 0x000 0x1 0x0 +#define MX8MM_IOMUXC_I2C4_SDA_PCIE2_CLKREQ_B 0x230 0x498 0x528 0x2 0x0 +#define MX8MM_IOMUXC_I2C4_SDA_GPIO5_IO21 0x230 0x498 0x000 0x5 0x0 +#define MX8MM_IOMUXC_I2C4_SDA_TPSMP_HDATA23 0x230 0x498 0x000 0x7 0x0 +#define MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX 0x234 0x49C 0x4F4 0x0 0x0 +#define MX8MM_IOMUXC_UART1_RXD_UART1_DTE_TX 0x234 0x49C 0x000 0x0 0x0 +#define MX8MM_IOMUXC_UART1_RXD_ECSPI3_SCLK 0x234 0x49C 0x000 0x1 0x0 +#define MX8MM_IOMUXC_UART1_RXD_GPIO5_IO22 0x234 0x49C 0x000 0x5 0x0 +#define MX8MM_IOMUXC_UART1_RXD_TPSMP_HDATA24 0x234 0x49C 0x000 0x7 0x0 +#define MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX 0x238 0x4A0 0x000 0x0 0x0 +#define MX8MM_IOMUXC_UART1_TXD_UART1_DTE_RX 0x238 0x4A0 0x4F4 0x0 0x0 +#define MX8MM_IOMUXC_UART1_TXD_ECSPI3_MOSI 0x238 0x4A0 0x000 0x1 0x0 +#define MX8MM_IOMUXC_UART1_TXD_GPIO5_IO23 0x238 0x4A0 0x000 0x5 0x0 +#define MX8MM_IOMUXC_UART1_TXD_TPSMP_HDATA25 0x238 0x4A0 0x000 0x7 0x0 +#define MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX 0x23C 0x4A4 0x4FC 0x0 0x0 +#define MX8MM_IOMUXC_UART2_RXD_UART2_DTE_TX 0x23C 0x4A4 0x000 0x0 0x0 +#define MX8MM_IOMUXC_UART2_RXD_ECSPI3_MISO 0x23C 0x4A4 0x000 0x1 0x0 +#define MX8MM_IOMUXC_UART2_RXD_GPIO5_IO24 0x23C 0x4A4 0x000 0x5 0x0 +#define MX8MM_IOMUXC_UART2_RXD_TPSMP_HDATA26 0x23C 0x4A4 0x000 0x7 0x0 +#define MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX 0x240 0x4A8 0x000 0x0 0x0 +#define MX8MM_IOMUXC_UART2_TXD_UART2_DTE_RX 0x240 0x4A8 0x4FC 0x0 0x1 +#define MX8MM_IOMUXC_UART2_TXD_ECSPI3_SS0 0x240 0x4A8 0x000 0x1 0x0 +#define MX8MM_IOMUXC_UART2_TXD_GPIO5_IO25 0x240 0x4A8 0x000 0x5 0x0 +#define MX8MM_IOMUXC_UART2_TXD_TPSMP_HDATA27 0x240 0x4A8 0x000 0x7 0x0 +#define MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX 0x244 0x4AC 0x504 0x0 0x2 +#define MX8MM_IOMUXC_UART3_RXD_UART3_DTE_TX 0x244 0x4AC 0x000 0x0 0x0 +#define MX8MM_IOMUXC_UART3_RXD_UART1_DCE_CTS_B 0x244 0x4AC 0x000 0x1 0x0 +#define MX8MM_IOMUXC_UART3_RXD_UART1_DTE_RTS_B 0x244 0x4AC 0x4F0 0x1 0x0 +#define MX8MM_IOMUXC_UART3_RXD_GPIO5_IO26 0x244 0x4AC 0x000 0x5 0x0 +#define MX8MM_IOMUXC_UART3_RXD_TPSMP_HDATA28 0x244 0x4AC 0x000 0x7 0x0 +#define MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX 0x248 0x4B0 0x000 0x0 0x0 +#define MX8MM_IOMUXC_UART3_TXD_UART3_DTE_RX 0x248 0x4B0 0x504 0x0 0x3 +#define MX8MM_IOMUXC_UART3_TXD_UART1_DCE_RTS_B 0x248 0x4B0 0x4F0 0x1 0x1 +#define MX8MM_IOMUXC_UART3_TXD_UART1_DTE_CTS_B 0x248 0x4B0 0x000 0x1 0x0 +#define MX8MM_IOMUXC_UART3_TXD_GPIO5_IO27 0x248 0x4B0 0x000 0x5 0x0 +#define MX8MM_IOMUXC_UART3_TXD_TPSMP_HDATA29 0x248 0x4B0 0x000 0x7 0x0 +#define MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX 0x24C 0x4B4 0x50C 0x0 0x2 +#define MX8MM_IOMUXC_UART4_RXD_UART4_DTE_TX 0x24C 0x4B4 0x000 0x0 0x0 +#define MX8MM_IOMUXC_UART4_RXD_UART2_DCE_CTS_B 0x24C 0x4B4 0x000 0x1 0x0 +#define MX8MM_IOMUXC_UART4_RXD_UART2_DTE_RTS_B 0x24C 0x4B4 0x4F8 0x1 0x0 +#define MX8MM_IOMUXC_UART4_RXD_PCIE1_CLKREQ_B 0x24C 0x4B4 0x524 0x2 0x1 +#define MX8MM_IOMUXC_UART4_RXD_GPIO5_IO28 0x24C 0x4B4 0x000 0x5 0x0 +#define MX8MM_IOMUXC_UART4_RXD_TPSMP_HDATA30 0x24C 0x4B4 0x000 0x7 0x0 +#define MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX 0x250 0x4B8 0x000 0x0 0x0 +#define MX8MM_IOMUXC_UART4_TXD_UART4_DTE_RX 0x250 0x4B8 0x50C 0x0 0x3 +#define MX8MM_IOMUXC_UART4_TXD_UART2_DCE_RTS_B 0x250 0x4B8 0x4F8 0x1 0x1 +#define MX8MM_IOMUXC_UART4_TXD_UART2_DTE_CTS_B 0x250 0x4B8 0x000 0x1 0x0 +#define MX8MM_IOMUXC_UART4_TXD_PCIE2_CLKREQ_B 0x250 0x4B8 0x528 0x2 0x1 +#define MX8MM_IOMUXC_UART4_TXD_GPIO5_IO29 0x250 0x4B8 0x000 0x5 0x0 +#define MX8MM_IOMUXC_UART4_TXD_TPSMP_HDATA31 0x250 0x4B8 0x000 0x7 0x0 + +#endif /* __DTS_IMX8MM_PINFUNC_H */ diff --git a/dts/src/arm64/freescale/imx8mq-evk.dts b/dts/src/arm64/freescale/imx8mq-evk.dts index f74b13aa5a..54737bf177 100644 --- a/dts/src/arm64/freescale/imx8mq-evk.dts +++ b/dts/src/arm64/freescale/imx8mq-evk.dts @@ -37,7 +37,19 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fec1>; phy-mode = "rgmii-id"; + phy-handle = <ðphy0>; + fsl,magic-packet; status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + }; + }; }; &i2c1 { @@ -137,6 +149,29 @@ status = "okay"; }; +&usb3_phy1 { + status = "okay"; +}; + +&usb_dwc3_1 { + dr_mode = "host"; + status = "okay"; +}; + +&qspi0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_qspi>; + status = "okay"; + + n25q256a: flash@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + compatible = "micron,n25q256a", "jedec,spi-nor"; + spi-max-frequency = <29000000>; + }; +}; + &usdhc1 { pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc1>; @@ -195,6 +230,18 @@ >; }; + pinctrl_qspi: qspigrp { + fsl,pins = < + MX8MQ_IOMUXC_NAND_ALE_QSPI_A_SCLK 0x82 + MX8MQ_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B 0x82 + MX8MQ_IOMUXC_NAND_DATA00_QSPI_A_DATA0 0x82 + MX8MQ_IOMUXC_NAND_DATA01_QSPI_A_DATA1 0x82 + MX8MQ_IOMUXC_NAND_DATA02_QSPI_A_DATA2 0x82 + MX8MQ_IOMUXC_NAND_DATA03_QSPI_A_DATA3 0x82 + + >; + }; + pinctrl_reg_usdhc2: regusdhc2grpgpio { fsl,pins = < MX8MQ_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41 diff --git a/dts/src/arm64/freescale/imx8mq.dtsi b/dts/src/arm64/freescale/imx8mq.dtsi index b6d31499fb..9155bd4784 100644 --- a/dts/src/arm64/freescale/imx8mq.dtsi +++ b/dts/src/arm64/freescale/imx8mq.dtsi @@ -5,13 +5,13 @@ */ #include <dt-bindings/clock/imx8mq-clock.h> +#include <dt-bindings/power/imx8mq-power.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include "imx8mq-pinfunc.h" / { - /* This should really be the GPC, but we need a driver for this first */ - interrupt-parent = <&gic>; + interrupt-parent = <&gpc>; #address-cells = <2>; #size-cells = <2>; @@ -25,6 +25,9 @@ serial1 = &uart2; serial2 = &uart3; serial3 = &uart4; + spi0 = &ecspi1; + spi1 = &ecspi2; + spi2 = &ecspi3; }; ckil: clock-ckil { @@ -117,6 +120,13 @@ }; }; + pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gic>; + interrupt-affinity = <&A53_0>, <&A53_1>, <&A53_2>, <&A53_3>; + }; + psci { compatible = "arm,psci-1.0"; method = "smc"; @@ -137,6 +147,7 @@ #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x0 0x0 0x3e000000>; + dma-ranges = <0x40000000 0x0 0x40000000 0xc0000000>; bus@30000000 { /* AIPS1 */ compatible = "fsl,imx8mq-aips-bus", "simple-bus"; @@ -199,6 +210,30 @@ #interrupt-cells = <2>; }; + wdog1: watchdog@30280000 { + compatible = "fsl,imx8mq-wdt", "fsl,imx21-wdt"; + reg = <0x30280000 0x10000>; + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MQ_CLK_WDOG1_ROOT>; + status = "disabled"; + }; + + wdog2: watchdog@30290000 { + compatible = "fsl,imx8mq-wdt", "fsl,imx21-wdt"; + reg = <0x30290000 0x10000>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MQ_CLK_WDOG2_ROOT>; + status = "disabled"; + }; + + wdog3: watchdog@302a0000 { + compatible = "fsl,imx8mq-wdt", "fsl,imx21-wdt"; + reg = <0x302a0000 0x10000>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MQ_CLK_WDOG3_ROOT>; + status = "disabled"; + }; + iomuxc: iomuxc@30330000 { compatible = "fsl,imx8mq-iomuxc"; reg = <0x30330000 0x10000>; @@ -215,6 +250,20 @@ interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; }; + snvs: snvs@30370000 { + compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd"; + reg = <0x30370000 0x10000>; + + snvs_rtc: snvs-rtc-lp{ + compatible = "fsl,sec-v4.0-mon-rtc-lp"; + regmap =<&snvs>; + offset = <0x34>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + }; + + }; + clk: clock-controller@30380000 { compatible = "fsl,imx8mq-ccm"; reg = <0x30380000 0x10000>; @@ -229,43 +278,172 @@ "clk_ext3", "clk_ext4"; }; - wdog1: watchdog@30280000 { - compatible = "fsl,imx8mq-wdt", "fsl,imx21-wdt"; - reg = <0x30280000 0x10000>; - interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MQ_CLK_WDOG1_ROOT>; + gpc: gpc@303a0000 { + compatible = "fsl,imx8mq-gpc"; + reg = <0x303a0000 0x10000>; + interrupt-parent = <&gic>; + interrupt-controller; + #interrupt-cells = <3>; + + pgc { + #address-cells = <1>; + #size-cells = <0>; + + pgc_mipi: power-domain@0 { + #power-domain-cells = <0>; + reg = <IMX8M_POWER_DOMAIN_MIPI>; + }; + + pgc_pcie1: power-domain@1 { + #power-domain-cells = <0>; + reg = <IMX8M_POWER_DOMAIN_PCIE1>; + }; + + pgc_otg1: power-domain@2 { + #power-domain-cells = <0>; + reg = <IMX8M_POWER_DOMAIN_USB_OTG1>; + }; + + pgc_otg2: power-domain@3 { + #power-domain-cells = <0>; + reg = <IMX8M_POWER_DOMAIN_USB_OTG2>; + }; + + pgc_ddr1: power-domain@4 { + #power-domain-cells = <0>; + reg = <IMX8M_POWER_DOMAIN_DDR1>; + }; + + pgc_gpu: power-domain@5 { + #power-domain-cells = <0>; + reg = <IMX8M_POWER_DOMAIN_GPU>; + clocks = <&clk IMX8MQ_CLK_GPU_ROOT>, + <&clk IMX8MQ_CLK_GPU_SHADER_DIV>, + <&clk IMX8MQ_CLK_GPU_AXI>, + <&clk IMX8MQ_CLK_GPU_AHB>; + }; + + pgc_vpu: power-domain@6 { + #power-domain-cells = <0>; + reg = <IMX8M_POWER_DOMAIN_VPU>; + }; + + pgc_disp: power-domain@7 { + #power-domain-cells = <0>; + reg = <IMX8M_POWER_DOMAIN_DISP>; + }; + + pgc_mipi_csi1: power-domain@8 { + #power-domain-cells = <0>; + reg = <IMX8M_POWER_DOMAIN_MIPI_CSI1>; + }; + + pgc_mipi_csi2: power-domain@9 { + #power-domain-cells = <0>; + reg = <IMX8M_POWER_DOMAIN_MIPI_CSI2>; + }; + + pgc_pcie2: power-domain@a { + #power-domain-cells = <0>; + reg = <IMX8M_POWER_DOMAIN_PCIE2>; + }; + }; + }; + }; + + bus@30400000 { /* AIPS2 */ + compatible = "fsl,imx8mq-aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x30400000 0x30400000 0x400000>; + + pwm1: pwm@30660000 { + compatible = "fsl,imx8mq-pwm", "fsl,imx27-pwm"; + reg = <0x30660000 0x10000>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MQ_CLK_PWM1_ROOT>, + <&clk IMX8MQ_CLK_PWM1_ROOT>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; status = "disabled"; }; - wdog2: watchdog@30290000 { - compatible = "fsl,imx8mq-wdt", "fsl,imx21-wdt"; - reg = <0x30290000 0x10000>; - interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MQ_CLK_WDOG2_ROOT>; + pwm2: pwm@30670000 { + compatible = "fsl,imx8mq-pwm", "fsl,imx27-pwm"; + reg = <0x30670000 0x10000>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MQ_CLK_PWM2_ROOT>, + <&clk IMX8MQ_CLK_PWM2_ROOT>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; status = "disabled"; }; - wdog3: watchdog@302a0000 { - compatible = "fsl,imx8mq-wdt", "fsl,imx21-wdt"; - reg = <0x302a0000 0x10000>; - interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MQ_CLK_WDOG3_ROOT>; + pwm3: pwm@30680000 { + compatible = "fsl,imx8mq-pwm", "fsl,imx27-pwm"; + reg = <0x30680000 0x10000>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MQ_CLK_PWM3_ROOT>, + <&clk IMX8MQ_CLK_PWM3_ROOT>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; status = "disabled"; }; - }; - bus@30400000 { /* AIPS2 */ - compatible = "fsl,imx8mq-aips-bus", "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x30400000 0x30400000 0x400000>; + pwm4: pwm@30690000 { + compatible = "fsl,imx8mq-pwm", "fsl,imx27-pwm"; + reg = <0x30690000 0x10000>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MQ_CLK_PWM4_ROOT>, + <&clk IMX8MQ_CLK_PWM4_ROOT>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + status = "disabled"; + }; }; bus@30800000 { /* AIPS3 */ compatible = "fsl,imx8mq-aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; - ranges = <0x30800000 0x30800000 0x400000>; + ranges = <0x30800000 0x30800000 0x400000>, + <0x08000000 0x08000000 0x10000000>; + + ecspi1: spi@30820000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx8mq-ecspi", "fsl,imx51-ecspi"; + reg = <0x30820000 0x10000>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MQ_CLK_ECSPI1_ROOT>, + <&clk IMX8MQ_CLK_ECSPI1_ROOT>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + ecspi2: spi@30830000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx8mq-ecspi", "fsl,imx51-ecspi"; + reg = <0x30830000 0x10000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MQ_CLK_ECSPI2_ROOT>, + <&clk IMX8MQ_CLK_ECSPI2_ROOT>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + ecspi3: spi@30840000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx8mq-ecspi", "fsl,imx51-ecspi"; + reg = <0x30840000 0x10000>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MQ_CLK_ECSPI3_ROOT>, + <&clk IMX8MQ_CLK_ECSPI3_ROOT>; + clock-names = "ipg", "per"; + status = "disabled"; + }; uart1: serial@30860000 { compatible = "fsl,imx8mq-uart", @@ -383,6 +561,20 @@ status = "disabled"; }; + qspi0: spi@30bb0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx8mq-qspi", "fsl,imx7d-qspi"; + reg = <0x30bb0000 0x10000>, + <0x08000000 0x10000000>; + reg-names = "QuadSPI", "QuadSPI-memory"; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MQ_CLK_QSPI_ROOT>, + <&clk IMX8MQ_CLK_QSPI_ROOT>; + clock-names = "qspi_en", "qspi"; + status = "disabled"; + }; + fec1: ethernet@30be0000 { compatible = "fsl,imx8mq-fec", "fsl,imx6sx-fec"; reg = <0x30be0000 0x10000>; @@ -402,6 +594,70 @@ }; }; + usb_dwc3_0: usb@38100000 { + compatible = "fsl,imx8mq-dwc3", "snps,dwc3"; + reg = <0x38100000 0x10000>; + clocks = <&clk IMX8MQ_CLK_USB_BUS>, + <&clk IMX8MQ_CLK_USB_CORE_REF>, + <&clk IMX8MQ_CLK_USB1_CTRL_ROOT>; + clock-names = "bus_early", "ref", "suspend"; + assigned-clocks = <&clk IMX8MQ_CLK_USB_BUS>, + <&clk IMX8MQ_CLK_USB_CORE_REF>; + assigned-clock-parents = <&clk IMX8MQ_SYS2_PLL_500M>, + <&clk IMX8MQ_SYS1_PLL_100M>; + assigned-clock-rates = <500000000>, <100000000>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + phys = <&usb3_phy0>, <&usb3_phy0>; + phy-names = "usb2-phy", "usb3-phy"; + power-domains = <&pgc_otg1>; + usb3-resume-missing-cas; + status = "disabled"; + }; + + usb3_phy0: usb-phy@381f0040 { + compatible = "fsl,imx8mq-usb-phy"; + reg = <0x381f0040 0x40>; + clocks = <&clk IMX8MQ_CLK_USB1_PHY_ROOT>; + clock-names = "phy"; + assigned-clocks = <&clk IMX8MQ_CLK_USB_PHY_REF>; + assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_100M>; + assigned-clock-rates = <100000000>; + #phy-cells = <0>; + status = "disabled"; + }; + + usb_dwc3_1: usb@38200000 { + compatible = "fsl,imx8mq-dwc3", "snps,dwc3"; + reg = <0x38200000 0x10000>; + clocks = <&clk IMX8MQ_CLK_USB_BUS>, + <&clk IMX8MQ_CLK_USB_CORE_REF>, + <&clk IMX8MQ_CLK_USB2_CTRL_ROOT>; + clock-names = "bus_early", "ref", "suspend"; + assigned-clocks = <&clk IMX8MQ_CLK_USB_BUS>, + <&clk IMX8MQ_CLK_USB_CORE_REF>; + assigned-clock-parents = <&clk IMX8MQ_SYS2_PLL_500M>, + <&clk IMX8MQ_SYS1_PLL_100M>; + assigned-clock-rates = <500000000>, <100000000>; + interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + phys = <&usb3_phy1>, <&usb3_phy1>; + phy-names = "usb2-phy", "usb3-phy"; + power-domains = <&pgc_otg2>; + usb3-resume-missing-cas; + status = "disabled"; + }; + + usb3_phy1: usb-phy@382f0040 { + compatible = "fsl,imx8mq-usb-phy"; + reg = <0x382f0040 0x40>; + clocks = <&clk IMX8MQ_CLK_USB2_PHY_ROOT>; + clock-names = "phy"; + assigned-clocks = <&clk IMX8MQ_CLK_USB_PHY_REF>; + assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_100M>; + assigned-clock-rates = <100000000>; + #phy-cells = <0>; + status = "disabled"; + }; + gic: interrupt-controller@38800000 { compatible = "arm,gic-v3"; reg = <0x38800000 0x10000>, /* GIC Dist */ diff --git a/dts/src/arm64/freescale/imx8qxp-mek.dts b/dts/src/arm64/freescale/imx8qxp-mek.dts new file mode 100644 index 0000000000..03aad66545 --- /dev/null +++ b/dts/src/arm64/freescale/imx8qxp-mek.dts @@ -0,0 +1,137 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2017~2018 NXP + */ + +/dts-v1/; + +#include "imx8qxp.dtsi" + +/ { + model = "Freescale i.MX8QXP MEK"; + compatible = "fsl,imx8qxp-mek", "fsl,imx8qxp"; + + chosen { + stdout-path = &adma_lpuart0; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x00000000 0x80000000 0 0x40000000>; + }; + + reg_usdhc2_vmmc: usdhc2-vmmc { + compatible = "regulator-fixed"; + regulator-name = "SD1_SPWR"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + gpio = <&lsio_gpio4 19 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&adma_lpuart0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart0>; + status = "okay"; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy0>; + fsl,magic-packet; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + }; + + ethphy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; + }; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + bus-width = <8>; + no-sd; + no-sdio; + non-removable; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + bus-width = <4>; + vmmc-supply = <®_usdhc2_vmmc>; + cd-gpios = <&lsio_gpio4 22 GPIO_ACTIVE_LOW>; + wp-gpios = <&lsio_gpio4 21 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&iomuxc { + pinctrl_fec1: fec1grp { + fsl,pins = < + IMX8QXP_ENET0_MDC_CONN_ENET0_MDC 0x06000020 + IMX8QXP_ENET0_MDIO_CONN_ENET0_MDIO 0x06000020 + IMX8QXP_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL 0x06000020 + IMX8QXP_ENET0_RGMII_TXC_CONN_ENET0_RGMII_TXC 0x06000020 + IMX8QXP_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0 0x06000020 + IMX8QXP_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1 0x06000020 + IMX8QXP_ENET0_RGMII_TXD2_CONN_ENET0_RGMII_TXD2 0x06000020 + IMX8QXP_ENET0_RGMII_TXD3_CONN_ENET0_RGMII_TXD3 0x06000020 + IMX8QXP_ENET0_RGMII_RXC_CONN_ENET0_RGMII_RXC 0x06000020 + IMX8QXP_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL 0x06000020 + IMX8QXP_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0 0x06000020 + IMX8QXP_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1 0x06000020 + IMX8QXP_ENET0_RGMII_RXD2_CONN_ENET0_RGMII_RXD2 0x06000020 + IMX8QXP_ENET0_RGMII_RXD3_CONN_ENET0_RGMII_RXD3 0x06000020 + >; + }; + + pinctrl_lpuart0: lpuart0grp { + fsl,pins = < + IMX8QXP_UART0_RX_ADMA_UART0_RX 0x06000020 + IMX8QXP_UART0_TX_ADMA_UART0_TX 0x06000020 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041 + IMX8QXP_EMMC0_CMD_CONN_EMMC0_CMD 0x00000021 + IMX8QXP_EMMC0_DATA0_CONN_EMMC0_DATA0 0x00000021 + IMX8QXP_EMMC0_DATA1_CONN_EMMC0_DATA1 0x00000021 + IMX8QXP_EMMC0_DATA2_CONN_EMMC0_DATA2 0x00000021 + IMX8QXP_EMMC0_DATA3_CONN_EMMC0_DATA3 0x00000021 + IMX8QXP_EMMC0_DATA4_CONN_EMMC0_DATA4 0x00000021 + IMX8QXP_EMMC0_DATA5_CONN_EMMC0_DATA5 0x00000021 + IMX8QXP_EMMC0_DATA6_CONN_EMMC0_DATA6 0x00000021 + IMX8QXP_EMMC0_DATA7_CONN_EMMC0_DATA7 0x00000021 + IMX8QXP_EMMC0_STROBE_CONN_EMMC0_STROBE 0x00000041 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + IMX8QXP_USDHC1_CLK_CONN_USDHC1_CLK 0x06000041 + IMX8QXP_USDHC1_CMD_CONN_USDHC1_CMD 0x00000021 + IMX8QXP_USDHC1_DATA0_CONN_USDHC1_DATA0 0x00000021 + IMX8QXP_USDHC1_DATA1_CONN_USDHC1_DATA1 0x00000021 + IMX8QXP_USDHC1_DATA2_CONN_USDHC1_DATA2 0x00000021 + IMX8QXP_USDHC1_DATA3_CONN_USDHC1_DATA3 0x00000021 + IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x00000021 + >; + }; +}; diff --git a/dts/src/arm64/freescale/imx8qxp.dtsi b/dts/src/arm64/freescale/imx8qxp.dtsi new file mode 100644 index 0000000000..4c3dd95ed4 --- /dev/null +++ b/dts/src/arm64/freescale/imx8qxp.dtsi @@ -0,0 +1,446 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2016 Freescale Semiconductor, Inc. + * Copyright 2017-2018 NXP + * Dong Aisheng <aisheng.dong@nxp.com> + */ + +#include <dt-bindings/clock/imx8-clock.h> +#include <dt-bindings/firmware/imx/rsrc.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/pinctrl/pads-imx8qxp.h> + +/ { + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + mmc0 = &usdhc1; + mmc1 = &usdhc2; + mmc2 = &usdhc3; + serial0 = &adma_lpuart0; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + /* We have 1 clusters with 4 Cortex-A35 cores */ + A35_0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a35"; + reg = <0x0 0x0>; + enable-method = "psci"; + next-level-cache = <&A35_L2>; + }; + + A35_1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a35"; + reg = <0x0 0x1>; + enable-method = "psci"; + next-level-cache = <&A35_L2>; + }; + + A35_2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a35"; + reg = <0x0 0x2>; + enable-method = "psci"; + next-level-cache = <&A35_L2>; + }; + + A35_3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a35"; + reg = <0x0 0x3>; + enable-method = "psci"; + next-level-cache = <&A35_L2>; + }; + + A35_L2: l2-cache0 { + compatible = "cache"; + }; + }; + + gic: interrupt-controller@51a00000 { + compatible = "arm,gic-v3"; + reg = <0x0 0x51a00000 0 0x10000>, /* GIC Dist */ + <0x0 0x51b00000 0 0xc0000>; /* GICR (RD_base + SGI_base) */ + #interrupt-cells = <3>; + interrupt-controller; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + scu { + compatible = "fsl,imx-scu"; + mbox-names = "tx0", "tx1", "tx2", "tx3", + "rx0", "rx1", "rx2", "rx3"; + mboxes = <&lsio_mu1 0 0 + &lsio_mu1 0 1 + &lsio_mu1 0 2 + &lsio_mu1 0 3 + &lsio_mu1 1 0 + &lsio_mu1 1 1 + &lsio_mu1 1 2 + &lsio_mu1 1 3>; + + clk: clock-controller { + compatible = "fsl,imx8qxp-clk"; + #clock-cells = <1>; + clocks = <&xtal32k &xtal24m>; + clock-names = "xtal_32KHz", "xtal_24Mhz"; + }; + + iomuxc: pinctrl { + compatible = "fsl,imx8qxp-iomuxc"; + }; + + pd: imx8qx-pd { + compatible = "fsl,imx8qxp-scu-pd"; + #power-domain-cells = <1>; + }; + + rtc: rtc { + compatible = "fsl,imx8qxp-sc-rtc"; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* Physical Secure */ + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* Physical Non-Secure */ + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* Virtual */ + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* Hypervisor */ + }; + + xtal32k: clock-xtal32k { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "xtal_32KHz"; + }; + + xtal24m: clock-xtal24m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + clock-output-names = "xtal_24MHz"; + }; + + adma_subsys: bus@59000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x59000000 0x0 0x59000000 0x2000000>; + + adma_lpcg: clock-controller@59000000 { + compatible = "fsl,imx8qxp-lpcg-adma"; + reg = <0x59000000 0x2000000>; + #clock-cells = <1>; + }; + + adma_lpuart0: serial@5a060000 { + compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart"; + reg = <0x5a060000 0x1000>; + interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gic>; + clocks = <&adma_lpcg IMX_ADMA_LPCG_UART0_BAUD_CLK>; + clock-names = "ipg"; + power-domains = <&pd IMX_SC_R_UART_0>; + status = "disabled"; + }; + + adma_i2c0: i2c@5a800000 { + compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c"; + reg = <0x5a800000 0x4000>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gic>; + clocks = <&adma_lpcg IMX_ADMA_LPCG_I2C0_CLK>; + clock-names = "per"; + assigned-clocks = <&clk IMX_ADMA_I2C0_CLK>; + assigned-clock-rates = <24000000>; + power-domains = <&pd IMX_SC_R_I2C_0>; + status = "disabled"; + }; + + adma_i2c1: i2c@5a810000 { + compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c"; + reg = <0x5a810000 0x4000>; + interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gic>; + clocks = <&adma_lpcg IMX_ADMA_LPCG_I2C1_CLK>; + clock-names = "per"; + assigned-clocks = <&clk IMX_ADMA_I2C1_CLK>; + assigned-clock-rates = <24000000>; + power-domains = <&pd IMX_SC_R_I2C_1>; + status = "disabled"; + }; + + adma_i2c2: i2c@5a820000 { + compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c"; + reg = <0x5a820000 0x4000>; + interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gic>; + clocks = <&adma_lpcg IMX_ADMA_LPCG_I2C2_CLK>; + clock-names = "per"; + assigned-clocks = <&clk IMX_ADMA_I2C2_CLK>; + assigned-clock-rates = <24000000>; + power-domains = <&pd IMX_SC_R_I2C_2>; + status = "disabled"; + }; + + adma_i2c3: i2c@5a830000 { + compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c"; + reg = <0x5a830000 0x4000>; + interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gic>; + clocks = <&adma_lpcg IMX_ADMA_LPCG_I2C3_CLK>; + clock-names = "per"; + assigned-clocks = <&clk IMX_ADMA_I2C3_CLK>; + assigned-clock-rates = <24000000>; + power-domains = <&pd IMX_SC_R_I2C_3>; + status = "disabled"; + }; + }; + + conn_subsys: bus@5b000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x5b000000 0x0 0x5b000000 0x1000000>; + + conn_lpcg: clock-controller@5b200000 { + compatible = "fsl,imx8qxp-lpcg-conn"; + reg = <0x5b200000 0xb0000>; + #clock-cells = <1>; + }; + + usdhc1: mmc@5b010000 { + compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc"; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x5b010000 0x10000>; + clocks = <&conn_lpcg IMX_CONN_LPCG_SDHC0_IPG_CLK>, + <&conn_lpcg IMX_CONN_LPCG_SDHC0_PER_CLK>, + <&conn_lpcg IMX_CONN_LPCG_SDHC0_HCLK>; + clock-names = "ipg", "per", "ahb"; + assigned-clocks = <&clk IMX_CONN_SDHC0_CLK>; + assigned-clock-rates = <200000000>; + power-domains = <&pd IMX_SC_R_SDHC_0>; + status = "disabled"; + }; + + usdhc2: mmc@5b020000 { + compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc"; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x5b020000 0x10000>; + clocks = <&conn_lpcg IMX_CONN_LPCG_SDHC1_IPG_CLK>, + <&conn_lpcg IMX_CONN_LPCG_SDHC1_PER_CLK>, + <&conn_lpcg IMX_CONN_LPCG_SDHC1_HCLK>; + clock-names = "ipg", "per", "ahb"; + assigned-clocks = <&clk IMX_CONN_SDHC1_CLK>; + assigned-clock-rates = <200000000>; + power-domains = <&pd IMX_SC_R_SDHC_1>; + fsl,tuning-start-tap = <20>; + fsl,tuning-step= <2>; + status = "disabled"; + }; + + usdhc3: mmc@5b030000 { + compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc"; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x5b030000 0x10000>; + clocks = <&conn_lpcg IMX_CONN_LPCG_SDHC2_IPG_CLK>, + <&conn_lpcg IMX_CONN_LPCG_SDHC2_PER_CLK>, + <&conn_lpcg IMX_CONN_LPCG_SDHC2_HCLK>; + clock-names = "ipg", "per", "ahb"; + assigned-clocks = <&clk IMX_CONN_SDHC2_CLK>; + assigned-clock-rates = <200000000>; + power-domains = <&pd IMX_SC_R_SDHC_2>; + status = "disabled"; + }; + + fec1: ethernet@5b040000 { + compatible = "fsl,imx8qxp-fec", "fsl,imx6sx-fec"; + reg = <0x5b040000 0x10000>; + interrupts = <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&conn_lpcg IMX_CONN_LPCG_ENET0_IPG_CLK>, + <&conn_lpcg IMX_CONN_LPCG_ENET0_AHB_CLK>, + <&conn_lpcg IMX_CONN_LPCG_ENET0_TX_CLK>, + <&conn_lpcg IMX_CONN_LPCG_ENET0_ROOT_CLK>; + clock-names = "ipg", "ahb", "enet_clk_ref", "ptp"; + fsl,num-tx-queues=<3>; + fsl,num-rx-queues=<3>; + power-domains = <&pd IMX_SC_R_ENET_0>; + status = "disabled"; + }; + + fec2: ethernet@5b050000 { + compatible = "fsl,imx8qxp-fec", "fsl,imx6sx-fec"; + reg = <0x5b050000 0x10000>; + interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&conn_lpcg IMX_CONN_LPCG_ENET1_IPG_CLK>, + <&conn_lpcg IMX_CONN_LPCG_ENET1_AHB_CLK>, + <&conn_lpcg IMX_CONN_LPCG_ENET1_TX_CLK>, + <&conn_lpcg IMX_CONN_LPCG_ENET1_ROOT_CLK>; + clock-names = "ipg", "ahb", "enet_clk_ref", "ptp"; + fsl,num-tx-queues=<3>; + fsl,num-rx-queues=<3>; + power-domains = <&pd IMX_SC_R_ENET_1>; + status = "disabled"; + }; + }; + + lsio_subsys: bus@5d000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x5d000000 0x0 0x5d000000 0x1000000>; + + lsio_lpcg: clock-controller@5d400000 { + compatible = "fsl,imx8qxp-lpcg-lsio"; + reg = <0x5d400000 0x400000>; + #clock-cells = <1>; + }; + + lsio_mu0: mailbox@5d1b0000 { + compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; + reg = <0x5d1b0000 0x10000>; + interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <0>; + status = "disabled"; + }; + + lsio_mu1: mailbox@5d1c0000 { + compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; + reg = <0x5d1c0000 0x10000>; + interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <2>; + }; + + lsio_mu3: mailbox@5d1e0000 { + compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; + reg = <0x5d1e0000 0x10000>; + interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <0>; + status = "disabled"; + }; + + lsio_mu4: mailbox@5d1f0000 { + compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; + reg = <0x5d1f0000 0x10000>; + interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <0>; + status = "disabled"; + }; + + lsio_gpio0: gpio@5d080000 { + compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio"; + reg = <0x5d080000 0x10000>; + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + power-domains = <&pd IMX_SC_R_GPIO_0>; + }; + + lsio_gpio1: gpio@5d090000 { + compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio"; + reg = <0x5d090000 0x10000>; + interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + power-domains = <&pd IMX_SC_R_GPIO_1>; + }; + + lsio_gpio2: gpio@5d0a0000 { + compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio"; + reg = <0x5d0a0000 0x10000>; + interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + power-domains = <&pd IMX_SC_R_GPIO_2>; + }; + + lsio_gpio3: gpio@5d0b0000 { + compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio"; + reg = <0x5d0b0000 0x10000>; + interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + power-domains = <&pd IMX_SC_R_GPIO_3>; + }; + + lsio_gpio4: gpio@5d0c0000 { + compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio"; + reg = <0x5d0c0000 0x10000>; + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + power-domains = <&pd IMX_SC_R_GPIO_4>; + }; + + lsio_gpio5: gpio@5d0d0000 { + compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio"; + reg = <0x5d0d0000 0x10000>; + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + power-domains = <&pd IMX_SC_R_GPIO_5>; + }; + + lsio_gpio6: gpio@5d0e0000 { + compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio"; + reg = <0x5d0e0000 0x10000>; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + power-domains = <&pd IMX_SC_R_GPIO_6>; + }; + + lsio_gpio7: gpio@5d0f0000 { + compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio"; + reg = <0x5d0f0000 0x10000>; + interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + power-domains = <&pd IMX_SC_R_GPIO_7>; + }; + }; +}; diff --git a/dts/src/arm64/hisilicon/hi3660-hikey960.dts b/dts/src/arm64/hisilicon/hi3660-hikey960.dts index 46435466f1..e035cf195b 100644 --- a/dts/src/arm64/hisilicon/hi3660-hikey960.dts +++ b/dts/src/arm64/hisilicon/hi3660-hikey960.dts @@ -581,8 +581,7 @@ sd-uhs-sdr50; sd-uhs-sdr104; disable-wp; - cd-inverted; - cd-gpios = <&gpio25 3 0>; + cd-gpios = <&gpio25 3 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&sd_pmx_func &sd_clk_cfg_func diff --git a/dts/src/arm64/hisilicon/hi3660.dtsi b/dts/src/arm64/hisilicon/hi3660.dtsi index 20ae40df61..2f19e0e5b7 100644 --- a/dts/src/arm64/hisilicon/hi3660.dtsi +++ b/dts/src/arm64/hisilicon/hi3660.dtsi @@ -56,7 +56,7 @@ }; cpu0: cpu@0 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; device_type = "cpu"; reg = <0x0 0x0>; enable-method = "psci"; @@ -70,7 +70,7 @@ }; cpu1: cpu@1 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; device_type = "cpu"; reg = <0x0 0x1>; enable-method = "psci"; @@ -83,7 +83,7 @@ }; cpu2: cpu@2 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; device_type = "cpu"; reg = <0x0 0x2>; enable-method = "psci"; @@ -96,7 +96,7 @@ }; cpu3: cpu@3 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; device_type = "cpu"; reg = <0x0 0x3>; enable-method = "psci"; @@ -109,7 +109,7 @@ }; cpu4: cpu@100 { - compatible = "arm,cortex-a73", "arm,armv8"; + compatible = "arm,cortex-a73"; device_type = "cpu"; reg = <0x0 0x100>; enable-method = "psci"; @@ -123,7 +123,7 @@ }; cpu5: cpu@101 { - compatible = "arm,cortex-a73", "arm,armv8"; + compatible = "arm,cortex-a73"; device_type = "cpu"; reg = <0x0 0x101>; enable-method = "psci"; @@ -136,7 +136,7 @@ }; cpu6: cpu@102 { - compatible = "arm,cortex-a73", "arm,armv8"; + compatible = "arm,cortex-a73"; device_type = "cpu"; reg = <0x0 0x102>; enable-method = "psci"; @@ -149,7 +149,7 @@ }; cpu7: cpu@103 { - compatible = "arm,cortex-a73", "arm,armv8"; + compatible = "arm,cortex-a73"; device_type = "cpu"; reg = <0x0 0x103>; enable-method = "psci"; diff --git a/dts/src/arm64/hisilicon/hi3670.dtsi b/dts/src/arm64/hisilicon/hi3670.dtsi index a5bd6d80b2..2ed06e4588 100644 --- a/dts/src/arm64/hisilicon/hi3670.dtsi +++ b/dts/src/arm64/hisilicon/hi3670.dtsi @@ -56,56 +56,56 @@ }; cpu0: cpu@0 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; device_type = "cpu"; reg = <0x0 0x0>; enable-method = "psci"; }; cpu1: cpu@1 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; device_type = "cpu"; reg = <0x0 0x1>; enable-method = "psci"; }; cpu2: cpu@2 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; device_type = "cpu"; reg = <0x0 0x2>; enable-method = "psci"; }; cpu3: cpu@3 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; device_type = "cpu"; reg = <0x0 0x3>; enable-method = "psci"; }; cpu4: cpu@100 { - compatible = "arm,cortex-a73", "arm,armv8"; + compatible = "arm,cortex-a73"; device_type = "cpu"; reg = <0x0 0x100>; enable-method = "psci"; }; cpu5: cpu@101 { - compatible = "arm,cortex-a73", "arm,armv8"; + compatible = "arm,cortex-a73"; device_type = "cpu"; reg = <0x0 0x101>; enable-method = "psci"; }; cpu6: cpu@102 { - compatible = "arm,cortex-a73", "arm,armv8"; + compatible = "arm,cortex-a73"; device_type = "cpu"; reg = <0x0 0x102>; enable-method = "psci"; }; cpu7: cpu@103 { - compatible = "arm,cortex-a73", "arm,armv8"; + compatible = "arm,cortex-a73"; device_type = "cpu"; reg = <0x0 0x103>; enable-method = "psci"; diff --git a/dts/src/arm64/hisilicon/hi3798cv200-poplar.dts b/dts/src/arm64/hisilicon/hi3798cv200-poplar.dts index 32716c96b4..c563d3eb2d 100644 --- a/dts/src/arm64/hisilicon/hi3798cv200-poplar.dts +++ b/dts/src/arm64/hisilicon/hi3798cv200-poplar.dts @@ -1,10 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * DTS File for HiSilicon Poplar Development Board * * Copyright (c) 2016-2017 HiSilicon Technologies Co., Ltd. - * - * Released under the GPLv2 only. - * SPDX-License-Identifier: GPL-2.0 */ /dts-v1/; diff --git a/dts/src/arm64/hisilicon/hi3798cv200.dtsi b/dts/src/arm64/hisilicon/hi3798cv200.dtsi index 7c0fddd7c8..13821a0ff5 100644 --- a/dts/src/arm64/hisilicon/hi3798cv200.dtsi +++ b/dts/src/arm64/hisilicon/hi3798cv200.dtsi @@ -1,10 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * DTS File for HiSilicon Hi3798cv200 SoC. * * Copyright (c) 2016-2017 HiSilicon Technologies Co., Ltd. - * - * Released under the GPLv2 only. - * SPDX-License-Identifier: GPL-2.0 */ #include <dt-bindings/clock/histb-clock.h> diff --git a/dts/src/arm64/hisilicon/hi6220-hikey.dts b/dts/src/arm64/hisilicon/hi6220-hikey.dts index 610235028c..c14205cd6b 100644 --- a/dts/src/arm64/hisilicon/hi6220-hikey.dts +++ b/dts/src/arm64/hisilicon/hi6220-hikey.dts @@ -118,6 +118,7 @@ reset-gpios = <&gpio0 5 GPIO_ACTIVE_LOW>; clocks = <&pmic>; clock-names = "ext_clock"; + post-power-on-delay-ms = <10>; power-off-delay-us = <10>; }; @@ -300,7 +301,6 @@ dwmmc_0: dwmmc0@f723d000 { cap-mmc-highspeed; - mmc-hs200-1_8v; non-removable; bus-width = <0x8>; vmmc-supply = <&ldo19>; diff --git a/dts/src/arm64/hisilicon/hi6220.dtsi b/dts/src/arm64/hisilicon/hi6220.dtsi index aec9e371c2..108e2a4227 100644 --- a/dts/src/arm64/hisilicon/hi6220.dtsi +++ b/dts/src/arm64/hisilicon/hi6220.dtsi @@ -81,7 +81,7 @@ }; cpu0: cpu@0 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; device_type = "cpu"; reg = <0x0 0x0>; enable-method = "psci"; @@ -94,7 +94,7 @@ }; cpu1: cpu@1 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; device_type = "cpu"; reg = <0x0 0x1>; enable-method = "psci"; @@ -107,7 +107,7 @@ }; cpu2: cpu@2 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; device_type = "cpu"; reg = <0x0 0x2>; enable-method = "psci"; @@ -120,7 +120,7 @@ }; cpu3: cpu@3 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; device_type = "cpu"; reg = <0x0 0x3>; enable-method = "psci"; @@ -133,7 +133,7 @@ }; cpu4: cpu@100 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; device_type = "cpu"; reg = <0x0 0x100>; enable-method = "psci"; @@ -146,7 +146,7 @@ }; cpu5: cpu@101 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; device_type = "cpu"; reg = <0x0 0x101>; enable-method = "psci"; @@ -159,7 +159,7 @@ }; cpu6: cpu@102 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; device_type = "cpu"; reg = <0x0 0x102>; enable-method = "psci"; @@ -172,7 +172,7 @@ }; cpu7: cpu@103 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; device_type = "cpu"; reg = <0x0 0x103>; enable-method = "psci"; @@ -319,6 +319,8 @@ clock-names = "uartclk", "apb_pclk"; pinctrl-names = "default"; pinctrl-0 = <&uart1_pmx_func &uart1_cfg_func1 &uart1_cfg_func2>; + dmas = <&dma0 8 &dma0 9>; + dma-names = "rx", "tx"; status = "disabled"; }; diff --git a/dts/src/arm64/hisilicon/hip05.dtsi b/dts/src/arm64/hisilicon/hip05.dtsi index 4b472a302c..d321edc09c 100644 --- a/dts/src/arm64/hisilicon/hip05.dtsi +++ b/dts/src/arm64/hisilicon/hip05.dtsi @@ -87,7 +87,7 @@ cpu0: cpu@20000 { device_type = "cpu"; - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0x20000>; enable-method = "psci"; next-level-cache = <&cluster0_l2>; @@ -95,7 +95,7 @@ cpu1: cpu@20001 { device_type = "cpu"; - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0x20001>; enable-method = "psci"; next-level-cache = <&cluster0_l2>; @@ -103,7 +103,7 @@ cpu2: cpu@20002 { device_type = "cpu"; - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0x20002>; enable-method = "psci"; next-level-cache = <&cluster0_l2>; @@ -111,7 +111,7 @@ cpu3: cpu@20003 { device_type = "cpu"; - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0x20003>; enable-method = "psci"; next-level-cache = <&cluster0_l2>; @@ -119,7 +119,7 @@ cpu4: cpu@20100 { device_type = "cpu"; - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0x20100>; enable-method = "psci"; next-level-cache = <&cluster1_l2>; @@ -127,7 +127,7 @@ cpu5: cpu@20101 { device_type = "cpu"; - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0x20101>; enable-method = "psci"; next-level-cache = <&cluster1_l2>; @@ -135,7 +135,7 @@ cpu6: cpu@20102 { device_type = "cpu"; - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0x20102>; enable-method = "psci"; next-level-cache = <&cluster1_l2>; @@ -143,7 +143,7 @@ cpu7: cpu@20103 { device_type = "cpu"; - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0x20103>; enable-method = "psci"; next-level-cache = <&cluster1_l2>; @@ -151,7 +151,7 @@ cpu8: cpu@20200 { device_type = "cpu"; - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0x20200>; enable-method = "psci"; next-level-cache = <&cluster2_l2>; @@ -159,7 +159,7 @@ cpu9: cpu@20201 { device_type = "cpu"; - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0x20201>; enable-method = "psci"; next-level-cache = <&cluster2_l2>; @@ -167,7 +167,7 @@ cpu10: cpu@20202 { device_type = "cpu"; - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0x20202>; enable-method = "psci"; next-level-cache = <&cluster2_l2>; @@ -175,7 +175,7 @@ cpu11: cpu@20203 { device_type = "cpu"; - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0x20203>; enable-method = "psci"; next-level-cache = <&cluster2_l2>; @@ -183,7 +183,7 @@ cpu12: cpu@20300 { device_type = "cpu"; - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0x20300>; enable-method = "psci"; next-level-cache = <&cluster3_l2>; @@ -191,7 +191,7 @@ cpu13: cpu@20301 { device_type = "cpu"; - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0x20301>; enable-method = "psci"; next-level-cache = <&cluster3_l2>; @@ -199,7 +199,7 @@ cpu14: cpu@20302 { device_type = "cpu"; - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0x20302>; enable-method = "psci"; next-level-cache = <&cluster3_l2>; @@ -207,7 +207,7 @@ cpu15: cpu@20303 { device_type = "cpu"; - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0x20303>; enable-method = "psci"; next-level-cache = <&cluster3_l2>; diff --git a/dts/src/arm64/hisilicon/hip06.dtsi b/dts/src/arm64/hisilicon/hip06.dtsi index d78a6a755d..56625587b6 100644 --- a/dts/src/arm64/hisilicon/hip06.dtsi +++ b/dts/src/arm64/hisilicon/hip06.dtsi @@ -87,7 +87,7 @@ cpu0: cpu@10000 { device_type = "cpu"; - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0x10000>; enable-method = "psci"; next-level-cache = <&cluster0_l2>; @@ -95,7 +95,7 @@ cpu1: cpu@10001 { device_type = "cpu"; - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0x10001>; enable-method = "psci"; next-level-cache = <&cluster0_l2>; @@ -103,7 +103,7 @@ cpu2: cpu@10002 { device_type = "cpu"; - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0x10002>; enable-method = "psci"; next-level-cache = <&cluster0_l2>; @@ -111,7 +111,7 @@ cpu3: cpu@10003 { device_type = "cpu"; - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0x10003>; enable-method = "psci"; next-level-cache = <&cluster0_l2>; @@ -119,7 +119,7 @@ cpu4: cpu@10100 { device_type = "cpu"; - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0x10100>; enable-method = "psci"; next-level-cache = <&cluster1_l2>; @@ -127,7 +127,7 @@ cpu5: cpu@10101 { device_type = "cpu"; - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0x10101>; enable-method = "psci"; next-level-cache = <&cluster1_l2>; @@ -135,7 +135,7 @@ cpu6: cpu@10102 { device_type = "cpu"; - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0x10102>; enable-method = "psci"; next-level-cache = <&cluster1_l2>; @@ -143,7 +143,7 @@ cpu7: cpu@10103 { device_type = "cpu"; - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0x10103>; enable-method = "psci"; next-level-cache = <&cluster1_l2>; @@ -151,7 +151,7 @@ cpu8: cpu@10200 { device_type = "cpu"; - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0x10200>; enable-method = "psci"; next-level-cache = <&cluster2_l2>; @@ -159,7 +159,7 @@ cpu9: cpu@10201 { device_type = "cpu"; - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0x10201>; enable-method = "psci"; next-level-cache = <&cluster2_l2>; @@ -167,7 +167,7 @@ cpu10: cpu@10202 { device_type = "cpu"; - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0x10202>; enable-method = "psci"; next-level-cache = <&cluster2_l2>; @@ -175,7 +175,7 @@ cpu11: cpu@10203 { device_type = "cpu"; - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0x10203>; enable-method = "psci"; next-level-cache = <&cluster2_l2>; @@ -183,7 +183,7 @@ cpu12: cpu@10300 { device_type = "cpu"; - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0x10300>; enable-method = "psci"; next-level-cache = <&cluster3_l2>; @@ -191,7 +191,7 @@ cpu13: cpu@10301 { device_type = "cpu"; - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0x10301>; enable-method = "psci"; next-level-cache = <&cluster3_l2>; @@ -199,7 +199,7 @@ cpu14: cpu@10302 { device_type = "cpu"; - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0x10302>; enable-method = "psci"; next-level-cache = <&cluster3_l2>; @@ -207,7 +207,7 @@ cpu15: cpu@10303 { device_type = "cpu"; - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0x10303>; enable-method = "psci"; next-level-cache = <&cluster3_l2>; diff --git a/dts/src/arm64/hisilicon/hip07.dtsi b/dts/src/arm64/hisilicon/hip07.dtsi index c33adefc30..28bd438944 100644 --- a/dts/src/arm64/hisilicon/hip07.dtsi +++ b/dts/src/arm64/hisilicon/hip07.dtsi @@ -270,7 +270,7 @@ cpu0: cpu@10000 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x10000>; enable-method = "psci"; next-level-cache = <&cluster0_l2>; @@ -279,7 +279,7 @@ cpu1: cpu@10001 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x10001>; enable-method = "psci"; next-level-cache = <&cluster0_l2>; @@ -288,7 +288,7 @@ cpu2: cpu@10002 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x10002>; enable-method = "psci"; next-level-cache = <&cluster0_l2>; @@ -297,7 +297,7 @@ cpu3: cpu@10003 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x10003>; enable-method = "psci"; next-level-cache = <&cluster0_l2>; @@ -306,7 +306,7 @@ cpu4: cpu@10100 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x10100>; enable-method = "psci"; next-level-cache = <&cluster1_l2>; @@ -315,7 +315,7 @@ cpu5: cpu@10101 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x10101>; enable-method = "psci"; next-level-cache = <&cluster1_l2>; @@ -324,7 +324,7 @@ cpu6: cpu@10102 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x10102>; enable-method = "psci"; next-level-cache = <&cluster1_l2>; @@ -333,7 +333,7 @@ cpu7: cpu@10103 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x10103>; enable-method = "psci"; next-level-cache = <&cluster1_l2>; @@ -342,7 +342,7 @@ cpu8: cpu@10200 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x10200>; enable-method = "psci"; next-level-cache = <&cluster2_l2>; @@ -351,7 +351,7 @@ cpu9: cpu@10201 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x10201>; enable-method = "psci"; next-level-cache = <&cluster2_l2>; @@ -360,7 +360,7 @@ cpu10: cpu@10202 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x10202>; enable-method = "psci"; next-level-cache = <&cluster2_l2>; @@ -369,7 +369,7 @@ cpu11: cpu@10203 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x10203>; enable-method = "psci"; next-level-cache = <&cluster2_l2>; @@ -378,7 +378,7 @@ cpu12: cpu@10300 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x10300>; enable-method = "psci"; next-level-cache = <&cluster3_l2>; @@ -387,7 +387,7 @@ cpu13: cpu@10301 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x10301>; enable-method = "psci"; next-level-cache = <&cluster3_l2>; @@ -396,7 +396,7 @@ cpu14: cpu@10302 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x10302>; enable-method = "psci"; next-level-cache = <&cluster3_l2>; @@ -405,7 +405,7 @@ cpu15: cpu@10303 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x10303>; enable-method = "psci"; next-level-cache = <&cluster3_l2>; @@ -414,7 +414,7 @@ cpu16: cpu@30000 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x30000>; enable-method = "psci"; next-level-cache = <&cluster4_l2>; @@ -423,7 +423,7 @@ cpu17: cpu@30001 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x30001>; enable-method = "psci"; next-level-cache = <&cluster4_l2>; @@ -432,7 +432,7 @@ cpu18: cpu@30002 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x30002>; enable-method = "psci"; next-level-cache = <&cluster4_l2>; @@ -441,7 +441,7 @@ cpu19: cpu@30003 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x30003>; enable-method = "psci"; next-level-cache = <&cluster4_l2>; @@ -450,7 +450,7 @@ cpu20: cpu@30100 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x30100>; enable-method = "psci"; next-level-cache = <&cluster5_l2>; @@ -459,7 +459,7 @@ cpu21: cpu@30101 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x30101>; enable-method = "psci"; next-level-cache = <&cluster5_l2>; @@ -468,7 +468,7 @@ cpu22: cpu@30102 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x30102>; enable-method = "psci"; next-level-cache = <&cluster5_l2>; @@ -477,7 +477,7 @@ cpu23: cpu@30103 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x30103>; enable-method = "psci"; next-level-cache = <&cluster5_l2>; @@ -486,7 +486,7 @@ cpu24: cpu@30200 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x30200>; enable-method = "psci"; next-level-cache = <&cluster6_l2>; @@ -495,7 +495,7 @@ cpu25: cpu@30201 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x30201>; enable-method = "psci"; next-level-cache = <&cluster6_l2>; @@ -504,7 +504,7 @@ cpu26: cpu@30202 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x30202>; enable-method = "psci"; next-level-cache = <&cluster6_l2>; @@ -513,7 +513,7 @@ cpu27: cpu@30203 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x30203>; enable-method = "psci"; next-level-cache = <&cluster6_l2>; @@ -522,7 +522,7 @@ cpu28: cpu@30300 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x30300>; enable-method = "psci"; next-level-cache = <&cluster7_l2>; @@ -531,7 +531,7 @@ cpu29: cpu@30301 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x30301>; enable-method = "psci"; next-level-cache = <&cluster7_l2>; @@ -540,7 +540,7 @@ cpu30: cpu@30302 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x30302>; enable-method = "psci"; next-level-cache = <&cluster7_l2>; @@ -549,7 +549,7 @@ cpu31: cpu@30303 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x30303>; enable-method = "psci"; next-level-cache = <&cluster7_l2>; @@ -558,7 +558,7 @@ cpu32: cpu@50000 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x50000>; enable-method = "psci"; next-level-cache = <&cluster8_l2>; @@ -567,7 +567,7 @@ cpu33: cpu@50001 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x50001>; enable-method = "psci"; next-level-cache = <&cluster8_l2>; @@ -576,7 +576,7 @@ cpu34: cpu@50002 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x50002>; enable-method = "psci"; next-level-cache = <&cluster8_l2>; @@ -585,7 +585,7 @@ cpu35: cpu@50003 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x50003>; enable-method = "psci"; next-level-cache = <&cluster8_l2>; @@ -594,7 +594,7 @@ cpu36: cpu@50100 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x50100>; enable-method = "psci"; next-level-cache = <&cluster9_l2>; @@ -603,7 +603,7 @@ cpu37: cpu@50101 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x50101>; enable-method = "psci"; next-level-cache = <&cluster9_l2>; @@ -612,7 +612,7 @@ cpu38: cpu@50102 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x50102>; enable-method = "psci"; next-level-cache = <&cluster9_l2>; @@ -621,7 +621,7 @@ cpu39: cpu@50103 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x50103>; enable-method = "psci"; next-level-cache = <&cluster9_l2>; @@ -630,7 +630,7 @@ cpu40: cpu@50200 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x50200>; enable-method = "psci"; next-level-cache = <&cluster10_l2>; @@ -639,7 +639,7 @@ cpu41: cpu@50201 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x50201>; enable-method = "psci"; next-level-cache = <&cluster10_l2>; @@ -648,7 +648,7 @@ cpu42: cpu@50202 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x50202>; enable-method = "psci"; next-level-cache = <&cluster10_l2>; @@ -657,7 +657,7 @@ cpu43: cpu@50203 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x50203>; enable-method = "psci"; next-level-cache = <&cluster10_l2>; @@ -666,7 +666,7 @@ cpu44: cpu@50300 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x50300>; enable-method = "psci"; next-level-cache = <&cluster11_l2>; @@ -675,7 +675,7 @@ cpu45: cpu@50301 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x50301>; enable-method = "psci"; next-level-cache = <&cluster11_l2>; @@ -684,7 +684,7 @@ cpu46: cpu@50302 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x50302>; enable-method = "psci"; next-level-cache = <&cluster11_l2>; @@ -693,7 +693,7 @@ cpu47: cpu@50303 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x50303>; enable-method = "psci"; next-level-cache = <&cluster11_l2>; @@ -702,7 +702,7 @@ cpu48: cpu@70000 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x70000>; enable-method = "psci"; next-level-cache = <&cluster12_l2>; @@ -711,7 +711,7 @@ cpu49: cpu@70001 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x70001>; enable-method = "psci"; next-level-cache = <&cluster12_l2>; @@ -720,7 +720,7 @@ cpu50: cpu@70002 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x70002>; enable-method = "psci"; next-level-cache = <&cluster12_l2>; @@ -729,7 +729,7 @@ cpu51: cpu@70003 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x70003>; enable-method = "psci"; next-level-cache = <&cluster12_l2>; @@ -738,7 +738,7 @@ cpu52: cpu@70100 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x70100>; enable-method = "psci"; next-level-cache = <&cluster13_l2>; @@ -747,7 +747,7 @@ cpu53: cpu@70101 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x70101>; enable-method = "psci"; next-level-cache = <&cluster13_l2>; @@ -756,7 +756,7 @@ cpu54: cpu@70102 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x70102>; enable-method = "psci"; next-level-cache = <&cluster13_l2>; @@ -765,7 +765,7 @@ cpu55: cpu@70103 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x70103>; enable-method = "psci"; next-level-cache = <&cluster13_l2>; @@ -774,7 +774,7 @@ cpu56: cpu@70200 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x70200>; enable-method = "psci"; next-level-cache = <&cluster14_l2>; @@ -783,7 +783,7 @@ cpu57: cpu@70201 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x70201>; enable-method = "psci"; next-level-cache = <&cluster14_l2>; @@ -792,7 +792,7 @@ cpu58: cpu@70202 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x70202>; enable-method = "psci"; next-level-cache = <&cluster14_l2>; @@ -801,7 +801,7 @@ cpu59: cpu@70203 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x70203>; enable-method = "psci"; next-level-cache = <&cluster14_l2>; @@ -810,7 +810,7 @@ cpu60: cpu@70300 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x70300>; enable-method = "psci"; next-level-cache = <&cluster15_l2>; @@ -819,7 +819,7 @@ cpu61: cpu@70301 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x70301>; enable-method = "psci"; next-level-cache = <&cluster15_l2>; @@ -828,7 +828,7 @@ cpu62: cpu@70302 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x70302>; enable-method = "psci"; next-level-cache = <&cluster15_l2>; @@ -837,7 +837,7 @@ cpu63: cpu@70303 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x70303>; enable-method = "psci"; next-level-cache = <&cluster15_l2>; diff --git a/dts/src/arm64/lg/lg1312.dtsi b/dts/src/arm64/lg/lg1312.dtsi index 4bde7b6f2b..c8dc9c20fb 100644 --- a/dts/src/arm64/lg/lg1312.dtsi +++ b/dts/src/arm64/lg/lg1312.dtsi @@ -21,27 +21,27 @@ cpu0: cpu@0 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x0>; next-level-cache = <&L2_0>; }; cpu1: cpu@1 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x1>; enable-method = "psci"; next-level-cache = <&L2_0>; }; cpu2: cpu@2 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x2>; enable-method = "psci"; next-level-cache = <&L2_0>; }; cpu3: cpu@3 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x3>; enable-method = "psci"; next-level-cache = <&L2_0>; diff --git a/dts/src/arm64/lg/lg1313.dtsi b/dts/src/arm64/lg/lg1313.dtsi index 16ced1ff1a..82c6645b58 100644 --- a/dts/src/arm64/lg/lg1313.dtsi +++ b/dts/src/arm64/lg/lg1313.dtsi @@ -21,27 +21,27 @@ cpu0: cpu@0 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x0>; next-level-cache = <&L2_0>; }; cpu1: cpu@1 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x1>; enable-method = "psci"; next-level-cache = <&L2_0>; }; cpu2: cpu@2 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x2>; enable-method = "psci"; next-level-cache = <&L2_0>; }; cpu3: cpu@3 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x3>; enable-method = "psci"; next-level-cache = <&L2_0>; diff --git a/dts/src/arm64/marvell/armada-3720-espressobin.dts b/dts/src/arm64/marvell/armada-3720-espressobin.dts index 846003bb48..6be019e188 100644 --- a/dts/src/arm64/marvell/armada-3720-espressobin.dts +++ b/dts/src/arm64/marvell/armada-3720-espressobin.dts @@ -46,11 +46,16 @@ /* J9 */ &pcie0 { status = "okay"; + phys = <&comphy1 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie_reset_pins &pcie_clkreq_pins>; }; /* J6 */ &sata { status = "okay"; + phys = <&comphy2 0>; + phy-names = "sata-phy"; }; /* J1 */ @@ -156,6 +161,11 @@ reg = <0>; label = "cpu"; ethernet = <ð0>; + phy-mode = "rgmii-id"; + fixed-link { + speed = <1000>; + full-duplex; + }; }; port@1 { @@ -196,6 +206,8 @@ }; ð0 { + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>, <&smi_pins>; phy-mode = "rgmii-id"; status = "okay"; diff --git a/dts/src/arm64/marvell/armada-3720-uDPU.dts b/dts/src/arm64/marvell/armada-3720-uDPU.dts new file mode 100644 index 0000000000..bd4aab6092 --- /dev/null +++ b/dts/src/arm64/marvell/armada-3720-uDPU.dts @@ -0,0 +1,162 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device tree for the uDPU board. + * Based on Marvell Armada 3720 development board (DB-88F3720-DDR3) + * Copyright (C) 2016 Marvell + * Copyright (C) 2019 Methode Electronics + * Copyright (C) 2019 Telus + * + * Vladimir Vid <vladimir.vid@sartura.hr> + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include "armada-372x.dtsi" + +/ { + model = "Methode uDPU Board"; + compatible = "methode,udpu", "marvell,armada3720"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x00000000 0x00000000 0x20000000>; + }; + + leds { + pinctrl-names = "default"; + compatible = "gpio-leds"; + + power1 { + label = "udpu:green:power"; + gpios = <&gpionb 11 GPIO_ACTIVE_LOW>; + }; + + power2 { + label = "udpu:red:power"; + gpios = <&gpionb 12 GPIO_ACTIVE_LOW>; + }; + + network1 { + label = "udpu:green:network"; + gpios = <&gpionb 13 GPIO_ACTIVE_LOW>; + }; + + network2 { + label = "udpu:red:network"; + gpios = <&gpionb 14 GPIO_ACTIVE_LOW>; + }; + + alarm1 { + label = "udpu:green:alarm"; + gpios = <&gpionb 15 GPIO_ACTIVE_LOW>; + }; + + alarm2 { + label = "udpu:red:alarm"; + gpios = <&gpionb 16 GPIO_ACTIVE_LOW>; + }; + }; + + sfp_eth0: sfp-eth0 { + compatible = "sff,sfp"; + i2c-bus = <&i2c0>; + los-gpio = <&gpiosb 2 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&gpiosb 3 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&gpiosb 4 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&gpiosb 5 GPIO_ACTIVE_HIGH>; + }; + + sfp_eth1: sfp-eth1 { + compatible = "sff,sfp"; + i2c-bus = <&i2c1>; + los-gpio = <&gpiosb 7 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&gpiosb 8 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&gpiosb 9 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&gpiosb 10 GPIO_ACTIVE_HIGH>; + }; +}; + +&sdhci0 { + status = "okay"; + bus-width = <8>; + mmc-ddr-1_8v; + mmc-hs400-1_8v; + marvell,pad-type = "fixed-1-8v"; + non-removable; + no-sd; + no-sdio; +}; + +&spi0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&spi_quad_pins>; + + m25p80@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <54000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + /* only bootloader is located on the SPI */ + partition@0 { + label = "uboot"; + reg = <0 0x400000>; + }; + }; + }; +}; + +&i2c0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; +}; + +&i2c1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + + lm75@48 { + status = "okay"; + compatible = "lm75"; + reg = <0x48>; + }; + + lm75@49 { + status = "okay"; + compatible = "lm75"; + reg = <0x49>; + }; +}; + +ð0 { + phy-mode = "sgmii"; + status = "okay"; + managed = "in-band-status"; + sfp = <&sfp_eth0>; +}; + +ð1 { + phy-mode = "sgmii"; + status = "okay"; + managed = "in-band-status"; + sfp = <&sfp_eth1>; +}; + +&usb3 { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; diff --git a/dts/src/arm64/marvell/armada-372x.dtsi b/dts/src/arm64/marvell/armada-372x.dtsi index 6800945a88..5ce55bdbb9 100644 --- a/dts/src/arm64/marvell/armada-372x.dtsi +++ b/dts/src/arm64/marvell/armada-372x.dtsi @@ -18,7 +18,7 @@ cpus { cpu1: cpu@1 { device_type = "cpu"; - compatible = "arm,cortex-a53","arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x1>; clocks = <&nb_periph_clk 16>; enable-method = "psci"; diff --git a/dts/src/arm64/marvell/armada-37xx.dtsi b/dts/src/arm64/marvell/armada-37xx.dtsi index e05594ea15..f43c43168b 100644 --- a/dts/src/arm64/marvell/armada-37xx.dtsi +++ b/dts/src/arm64/marvell/armada-37xx.dtsi @@ -42,7 +42,7 @@ #size-cells = <0>; cpu0: cpu@0 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0>; clocks = <&nb_periph_clk 16>; enable-method = "psci"; @@ -247,6 +247,35 @@ reg = <0x14000 0x60>; }; + comphy: phy@18300 { + compatible = "marvell,comphy-a3700"; + reg = <0x18300 0x300>, + <0x1F000 0x400>, + <0x5C000 0x400>, + <0xe0178 0x8>; + reg-names = "comphy", + "lane1_pcie_gbe", + "lane0_usb3_gbe", + "lane2_sata_usb3"; + #address-cells = <1>; + #size-cells = <0>; + + comphy0: phy@0 { + reg = <0>; + #phy-cells = <1>; + }; + + comphy1: phy@1 { + reg = <1>; + #phy-cells = <1>; + }; + + comphy2: phy@2 { + reg = <2>; + #phy-cells = <1>; + }; + }; + pinctrl_sb: pinctrl@18800 { compatible = "marvell,armada3710-sb-pinctrl", "syscon", "simple-mfd"; @@ -271,11 +300,25 @@ function = "mii"; }; + smi_pins: smi-pins { + groups = "smi"; + function = "smi"; + }; + sdio_pins: sdio-pins { groups = "sdio_sb"; function = "sdio"; }; + pcie_reset_pins: pcie-reset-pins { + groups = "pcie1"; + function = "pcie"; + }; + + pcie_clkreq_pins: pcie-clkreq-pins { + groups = "pcie1_clkreq"; + function = "pcie"; + }; }; eth0: ethernet@30000 { @@ -305,18 +348,50 @@ compatible = "marvell,armada3700-xhci", "generic-xhci"; reg = <0x58000 0x4000>; + marvell,usb-misc-reg = <&usb32_syscon>; interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; clocks = <&sb_periph_clk 12>; + phys = <&comphy0 0>, <&usb2_utmi_otg_phy>; + phy-names = "usb3-phy", "usb2-utmi-otg-phy"; status = "disabled"; }; + usb2_utmi_otg_phy: phy@5d000 { + compatible = "marvell,a3700-utmi-otg-phy"; + reg = <0x5d000 0x800>; + marvell,usb-misc-reg = <&usb32_syscon>; + #phy-cells = <0>; + }; + + usb32_syscon: system-controller@5d800 { + compatible = "marvell,armada-3700-usb2-host-device-misc", + "syscon"; + reg = <0x5d800 0x800>; + }; + usb2: usb@5e000 { compatible = "marvell,armada-3700-ehci"; - reg = <0x5e000 0x2000>; + reg = <0x5e000 0x1000>; + marvell,usb-misc-reg = <&usb2_syscon>; interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + phys = <&usb2_utmi_host_phy>; + phy-names = "usb2-utmi-host-phy"; status = "disabled"; }; + usb2_utmi_host_phy: phy@5f000 { + compatible = "marvell,a3700-utmi-host-phy"; + reg = <0x5f000 0x800>; + marvell,usb-misc-reg = <&usb2_syscon>; + #phy-cells = <0>; + }; + + usb2_syscon: system-controller@5f800 { + compatible = "marvell,armada-3700-usb2-host-misc", + "syscon"; + reg = <0x5f800 0x800>; + }; + xor@60900 { compatible = "marvell,armada-3700-xor"; reg = <0x60900 0x100>, @@ -368,8 +443,9 @@ sata: sata@e0000 { compatible = "marvell,armada-3700-ahci"; - reg = <0xe0000 0x2000>; + reg = <0xe0000 0x178>; interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&nb_periph_clk 1>; status = "disabled"; }; diff --git a/dts/src/arm64/marvell/armada-7040-db.dts b/dts/src/arm64/marvell/armada-7040-db.dts index 412efdb46e..d20d84ce7c 100644 --- a/dts/src/arm64/marvell/armada-7040-db.dts +++ b/dts/src/arm64/marvell/armada-7040-db.dts @@ -66,8 +66,6 @@ status = "okay"; spi-flash@0 { - #address-cells = <1>; - #size-cells = <1>; compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <10000000>; @@ -169,8 +167,6 @@ status = "okay"; spi-flash@0 { - #address-cells = <0x1>; - #size-cells = <0x1>; compatible = "jedec,spi-nor"; reg = <0x0>; spi-max-frequency = <20000000>; diff --git a/dts/src/arm64/marvell/armada-8040-db.dts b/dts/src/arm64/marvell/armada-8040-db.dts index 1bac437369..9f4f939ab6 100644 --- a/dts/src/arm64/marvell/armada-8040-db.dts +++ b/dts/src/arm64/marvell/armada-8040-db.dts @@ -81,8 +81,6 @@ status = "okay"; spi-flash@0 { - #address-cells = <1>; - #size-cells = <1>; compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <10000000>; @@ -214,8 +212,6 @@ status = "okay"; spi-flash@0 { - #address-cells = <0x1>; - #size-cells = <0x1>; compatible = "jedec,spi-nor"; reg = <0x0>; spi-max-frequency = <20000000>; diff --git a/dts/src/arm64/marvell/armada-ap806-dual.dtsi b/dts/src/arm64/marvell/armada-ap806-dual.dtsi index d3c0636558..861fd21922 100644 --- a/dts/src/arm64/marvell/armada-ap806-dual.dtsi +++ b/dts/src/arm64/marvell/armada-ap806-dual.dtsi @@ -17,13 +17,13 @@ cpu0: cpu@0 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x000>; enable-method = "psci"; }; cpu1: cpu@1 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x001>; enable-method = "psci"; }; diff --git a/dts/src/arm64/marvell/armada-ap806-quad.dtsi b/dts/src/arm64/marvell/armada-ap806-quad.dtsi index 01ea662afb..2baafe12eb 100644 --- a/dts/src/arm64/marvell/armada-ap806-quad.dtsi +++ b/dts/src/arm64/marvell/armada-ap806-quad.dtsi @@ -17,25 +17,25 @@ cpu0: cpu@0 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x000>; enable-method = "psci"; }; cpu1: cpu@1 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x001>; enable-method = "psci"; }; cpu2: cpu@100 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x100>; enable-method = "psci"; }; cpu3: cpu@101 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x101>; enable-method = "psci"; }; diff --git a/dts/src/arm64/marvell/armada-ap806.dtsi b/dts/src/arm64/marvell/armada-ap806.dtsi index 7f799cb566..91dad7e4ee 100644 --- a/dts/src/arm64/marvell/armada-ap806.dtsi +++ b/dts/src/arm64/marvell/armada-ap806.dtsi @@ -283,6 +283,8 @@ ap_thermal: thermal-sensor@80 { compatible = "marvell,armada-ap806-thermal"; reg = <0x80 0x10>; + interrupt-parent = <&sei>; + interrupts = <18>; #thermal-sensor-cells = <1>; }; }; @@ -293,16 +295,26 @@ * The thermal IP features one internal sensor plus, if applicable, one * remote channel wired to one sensor per CPU. * + * Only one thermal zone per AP/CP may trigger interrupts at a time, the + * first one that will have a critical trip point will be chosen. + * * The cooling maps are always empty as there are no cooling devices. */ thermal-zones { ap_thermal_ic: ap-thermal-ic { - polling-delay-passive = <1000>; - polling-delay = <1000>; + polling-delay-passive = <0>; /* Interrupt driven */ + polling-delay = <0>; /* Interrupt driven */ thermal-sensors = <&ap_thermal 0>; - trips { }; + trips { + ap_crit: ap-crit { + temperature = <100000>; /* mC degrees */ + hysteresis = <2000>; /* mC degrees */ + type = "critical"; + }; + }; + cooling-maps { }; }; diff --git a/dts/src/arm64/marvell/armada-ap810-ap0-octa-core.dtsi b/dts/src/arm64/marvell/armada-ap810-ap0-octa-core.dtsi index b788cb63ca..d1a7143ef3 100644 --- a/dts/src/arm64/marvell/armada-ap810-ap0-octa-core.dtsi +++ b/dts/src/arm64/marvell/armada-ap810-ap0-octa-core.dtsi @@ -15,49 +15,49 @@ cpu0: cpu@0 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x000>; enable-method = "psci"; }; cpu1: cpu@1 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x001>; enable-method = "psci"; }; cpu2: cpu@100 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x100>; enable-method = "psci"; }; cpu3: cpu@101 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x101>; enable-method = "psci"; }; cpu4: cpu@200 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x200>; enable-method = "psci"; }; cpu5: cpu@201 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x201>; enable-method = "psci"; }; cpu6: cpu@300 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x300>; enable-method = "psci"; }; cpu7: cpu@301 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x301>; enable-method = "psci"; }; diff --git a/dts/src/arm64/marvell/armada-cp110.dtsi b/dts/src/arm64/marvell/armada-cp110.dtsi index b9d9f31e3b..4d6e4a097f 100644 --- a/dts/src/arm64/marvell/armada-cp110.dtsi +++ b/dts/src/arm64/marvell/armada-cp110.dtsi @@ -28,12 +28,19 @@ */ thermal-zones { CP110_LABEL(thermal_ic): CP110_NODE_NAME(thermal-ic) { - polling-delay-passive = <1000>; - polling-delay = <1000>; + polling-delay-passive = <0>; /* Interrupt driven */ + polling-delay = <0>; /* Interrupt driven */ thermal-sensors = <&CP110_LABEL(thermal) 0>; - trips { }; + trips { + CP110_LABEL(crit): crit { + temperature = <100000>; /* mC degrees */ + hysteresis = <2000>; /* mC degrees */ + type = "critical"; + }; + }; + cooling-maps { }; }; }; @@ -259,6 +266,8 @@ CP110_LABEL(thermal): thermal-sensor@70 { compatible = "marvell,armada-cp110-thermal"; reg = <0x70 0x10>; + interrupts-extended = + <&CP110_LABEL(icu_sei) 116 IRQ_TYPE_LEVEL_HIGH>; #thermal-sensor-cells = <1>; }; }; diff --git a/dts/src/arm64/mediatek/mt2712-evb.dts b/dts/src/arm64/mediatek/mt2712-evb.dts index 4ce9d6ca0b..2b91daf5c1 100644 --- a/dts/src/arm64/mediatek/mt2712-evb.dts +++ b/dts/src/arm64/mediatek/mt2712-evb.dts @@ -6,6 +6,7 @@ */ /dts-v1/; +#include <dt-bindings/gpio/gpio.h> #include "mt2712e.dtsi" / { @@ -39,6 +40,53 @@ regulator-max-microvolt = <1000000>; }; + extcon_usb: extcon_iddig { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&pio 12 GPIO_ACTIVE_HIGH>; + }; + + extcon_usb1: extcon_iddig1 { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&pio 14 GPIO_ACTIVE_HIGH>; + }; + + usb_p0_vbus: regulator@2 { + compatible = "regulator-fixed"; + regulator-name = "p0_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&pio 13 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + usb_p1_vbus: regulator@3 { + compatible = "regulator-fixed"; + regulator-name = "p1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&pio 15 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + usb_p2_vbus: regulator@4 { + compatible = "regulator-fixed"; + regulator-name = "p2_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&pio 16 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + usb_p3_vbus: regulator@5 { + compatible = "regulator-fixed"; + regulator-name = "p3_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&pio 17 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + }; &auxadc { @@ -57,7 +105,57 @@ proc-supply = <&cpus_fixed_vproc1>; }; +&pio { + usb0_id_pins_float: usb0_iddig { + pins_iddig { + pinmux = <MT2712_PIN_12_IDDIG_P0__FUNC_IDDIG_A>; + bias-pull-up; + }; + }; + + usb1_id_pins_float: usb1_iddig { + pins_iddig { + pinmux = <MT2712_PIN_14_IDDIG_P1__FUNC_IDDIG_B>; + bias-pull-up; + }; + }; +}; + +&ssusb { + vbus-supply = <&usb_p0_vbus>; + extcon = <&extcon_usb>; + dr_mode = "otg"; + wakeup-source; + mediatek,u3p-dis-msk = <0x1>; + //enable-manual-drd; + //maximum-speed = "full-speed"; + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_pins_float>; + status = "okay"; +}; + +&ssusb1 { + vbus-supply = <&usb_p1_vbus>; + extcon = <&extcon_usb1>; + dr_mode = "otg"; + //mediatek,u3p-dis-msk = <0x1>; + enable-manual-drd; + wakeup-source; + //maximum-speed = "full-speed"; + pinctrl-names = "default"; + pinctrl-0 = <&usb1_id_pins_float>; + status = "okay"; +}; + &uart0 { status = "okay"; }; +&usb_host0 { + vbus-supply = <&usb_p2_vbus>; + status = "okay"; +}; + +&usb_host1 { + status = "okay"; +}; diff --git a/dts/src/arm64/mediatek/mt2712e.dtsi b/dts/src/arm64/mediatek/mt2712e.dtsi index ee627a7c7b..976d92a947 100644 --- a/dts/src/arm64/mediatek/mt2712e.dtsi +++ b/dts/src/arm64/mediatek/mt2712e.dtsi @@ -8,6 +8,8 @@ #include <dt-bindings/clock/mt2712-clk.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/memory/mt2712-larb-port.h> +#include <dt-bindings/phy/phy.h> #include <dt-bindings/power/mt2712-power.h> #include "mt2712-pinfunc.h" @@ -312,12 +314,33 @@ status = "disabled"; }; + iommu0: iommu@10205000 { + compatible = "mediatek,mt2712-m4u"; + reg = <0 0x10205000 0 0x1000>; + interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_LOW>; + clocks = <&infracfg CLK_INFRA_M4U>; + clock-names = "bclk"; + mediatek,larbs = <&larb0 &larb1 &larb2 + &larb3 &larb6>; + #iommu-cells = <1>; + }; + apmixedsys: syscon@10209000 { compatible = "mediatek,mt2712-apmixedsys", "syscon"; reg = <0 0x10209000 0 0x1000>; #clock-cells = <1>; }; + iommu1: iommu@1020a000 { + compatible = "mediatek,mt2712-m4u"; + reg = <0 0x1020a000 0 0x1000>; + interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_LOW>; + clocks = <&infracfg CLK_INFRA_M4U>; + clock-names = "bclk"; + mediatek,larbs = <&larb4 &larb5 &larb7>; + #iommu-cells = <1>; + }; + mcucfg: syscon@10220000 { compatible = "mediatek,mt2712-mcucfg", "syscon"; reg = <0 0x10220000 0 0x1000>; @@ -395,6 +418,210 @@ status = "disabled"; }; + pwm: pwm@11006000 { + compatible = "mediatek,mt2712-pwm"; + reg = <0 0x11006000 0 0x1000>; + #pwm-cells = <2>; + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_PWM_SEL>, + <&pericfg CLK_PERI_PWM>, + <&pericfg CLK_PERI_PWM0>, + <&pericfg CLK_PERI_PWM1>, + <&pericfg CLK_PERI_PWM2>, + <&pericfg CLK_PERI_PWM3>, + <&pericfg CLK_PERI_PWM4>, + <&pericfg CLK_PERI_PWM5>, + <&pericfg CLK_PERI_PWM6>, + <&pericfg CLK_PERI_PWM7>; + clock-names = "top", + "main", + "pwm1", + "pwm2", + "pwm3", + "pwm4", + "pwm5", + "pwm6", + "pwm7", + "pwm8"; + status = "disabled"; + }; + + i2c0: i2c@11007000 { + compatible = "mediatek,mt2712-i2c"; + reg = <0 0x11007000 0 0x90>, + <0 0x11000180 0 0x80>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_LOW>; + clock-div = <4>; + clocks = <&pericfg CLK_PERI_I2C0>, + <&pericfg CLK_PERI_AP_DMA>; + clock-names = "main", + "dma"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@11008000 { + compatible = "mediatek,mt2712-i2c"; + reg = <0 0x11008000 0 0x90>, + <0 0x11000200 0 0x80>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_LOW>; + clock-div = <4>; + clocks = <&pericfg CLK_PERI_I2C1>, + <&pericfg CLK_PERI_AP_DMA>; + clock-names = "main", + "dma"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@11009000 { + compatible = "mediatek,mt2712-i2c"; + reg = <0 0x11009000 0 0x90>, + <0 0x11000280 0 0x80>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_LOW>; + clock-div = <4>; + clocks = <&pericfg CLK_PERI_I2C2>, + <&pericfg CLK_PERI_AP_DMA>; + clock-names = "main", + "dma"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi0: spi@1100a000 { + compatible = "mediatek,mt2712-spi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x1100a000 0 0x100>; + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_UNIVPLL2_D4>, + <&topckgen CLK_TOP_SPI_SEL>, + <&pericfg CLK_PERI_SPI0>; + clock-names = "parent-clk", "sel-clk", "spi-clk"; + status = "disabled"; + }; + + nandc: nfi@1100e000 { + compatible = "mediatek,mt2712-nfc"; + reg = <0 0x1100e000 0 0x1000>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_NFI2X_EN>, <&pericfg CLK_PERI_NFI>; + clock-names = "nfi_clk", "pad_clk"; + ecc-engine = <&bch>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + bch: ecc@1100f000 { + compatible = "mediatek,mt2712-ecc"; + reg = <0 0x1100f000 0 0x1000>; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_NFI1X_CK_EN>; + clock-names = "nfiecc_clk"; + status = "disabled"; + }; + + i2c3: i2c@11010000 { + compatible = "mediatek,mt2712-i2c"; + reg = <0 0x11010000 0 0x90>, + <0 0x11000300 0 0x80>; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_LOW>; + clock-div = <4>; + clocks = <&pericfg CLK_PERI_I2C3>, + <&pericfg CLK_PERI_AP_DMA>; + clock-names = "main", + "dma"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c4: i2c@11011000 { + compatible = "mediatek,mt2712-i2c"; + reg = <0 0x11011000 0 0x90>, + <0 0x11000380 0 0x80>; + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_LOW>; + clock-div = <4>; + clocks = <&pericfg CLK_PERI_I2C4>, + <&pericfg CLK_PERI_AP_DMA>; + clock-names = "main", + "dma"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c5: i2c@11013000 { + compatible = "mediatek,mt2712-i2c"; + reg = <0 0x11013000 0 0x90>, + <0 0x11000100 0 0x80>; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_LOW>; + clock-div = <4>; + clocks = <&pericfg CLK_PERI_I2C5>, + <&pericfg CLK_PERI_AP_DMA>; + clock-names = "main", + "dma"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi2: spi@11015000 { + compatible = "mediatek,mt2712-spi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x11015000 0 0x100>; + interrupts = <GIC_SPI 284 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_UNIVPLL2_D4>, + <&topckgen CLK_TOP_SPI_SEL>, + <&pericfg CLK_PERI_SPI2>; + clock-names = "parent-clk", "sel-clk", "spi-clk"; + status = "disabled"; + }; + + spi3: spi@11016000 { + compatible = "mediatek,mt2712-spi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x11016000 0 0x100>; + interrupts = <GIC_SPI 285 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_UNIVPLL2_D4>, + <&topckgen CLK_TOP_SPI_SEL>, + <&pericfg CLK_PERI_SPI3>; + clock-names = "parent-clk", "sel-clk", "spi-clk"; + status = "disabled"; + }; + + spi4: spi@10012000 { + compatible = "mediatek,mt2712-spi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x10012000 0 0x100>; + interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_UNIVPLL2_D4>, + <&topckgen CLK_TOP_SPI_SEL>, + <&infracfg CLK_INFRA_AO_SPI0>; + clock-names = "parent-clk", "sel-clk", "spi-clk"; + status = "disabled"; + }; + + spi5: spi@11018000 { + compatible = "mediatek,mt2712-spi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x11018000 0 0x100>; + interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_UNIVPLL2_D4>, + <&topckgen CLK_TOP_SPI_SEL>, + <&pericfg CLK_PERI_SPI5>; + clock-names = "parent-clk", "sel-clk", "spi-clk"; + status = "disabled"; + }; + uart4: serial@11019000 { compatible = "mediatek,mt2712-uart", "mediatek,mt6577-uart"; @@ -405,6 +632,228 @@ status = "disabled"; }; + mmc0: mmc@11230000 { + compatible = "mediatek,mt2712-mmc"; + reg = <0 0x11230000 0 0x1000>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_LOW>; + clocks = <&pericfg CLK_PERI_MSDC30_0>, + <&pericfg CLK_PERI_MSDC50_0_HCLK_EN>, + <&pericfg CLK_PERI_MSDC30_0_QTR_EN>, + <&pericfg CLK_PERI_MSDC50_0_EN>; + clock-names = "source", "hclk", "bus_clk", "source_cg"; + status = "disabled"; + }; + + mmc1: mmc@11240000 { + compatible = "mediatek,mt2712-mmc"; + reg = <0 0x11240000 0 0x1000>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_LOW>; + clocks = <&pericfg CLK_PERI_MSDC30_1>, + <&topckgen CLK_TOP_AXI_SEL>, + <&pericfg CLK_PERI_MSDC30_1_EN>; + clock-names = "source", "hclk", "source_cg"; + status = "disabled"; + }; + + mmc2: mmc@11250000 { + compatible = "mediatek,mt2712-mmc"; + reg = <0 0x11250000 0 0x1000>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_LOW>; + clocks = <&pericfg CLK_PERI_MSDC30_2>, + <&topckgen CLK_TOP_AXI_SEL>, + <&pericfg CLK_PERI_MSDC30_2_EN>; + clock-names = "source", "hclk", "source_cg"; + status = "disabled"; + }; + + ssusb: usb@11271000 { + compatible = "mediatek,mt2712-mtu3", "mediatek,mtu3"; + reg = <0 0x11271000 0 0x3000>, + <0 0x11280700 0 0x0100>; + reg-names = "mac", "ippc"; + interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_LOW>; + phys = <&u2port0 PHY_TYPE_USB2>, + <&u2port1 PHY_TYPE_USB2>; + power-domains = <&scpsys MT2712_POWER_DOMAIN_USB>; + clocks = <&topckgen CLK_TOP_USB30_SEL>; + clock-names = "sys_ck"; + mediatek,syscon-wakeup = <&pericfg 0x510 2>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + usb_host0: xhci@11270000 { + compatible = "mediatek,mt2712-xhci", + "mediatek,mtk-xhci"; + reg = <0 0x11270000 0 0x1000>; + reg-names = "mac"; + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&scpsys MT2712_POWER_DOMAIN_USB>; + clocks = <&topckgen CLK_TOP_USB30_SEL>, <&clk26m>; + clock-names = "sys_ck", "ref_ck"; + status = "disabled"; + }; + }; + + u3phy0: usb-phy@11290000 { + compatible = "mediatek,mt2712-u3phy"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "okay"; + + u2port0: usb-phy@11290000 { + reg = <0 0x11290000 0 0x700>; + clocks = <&clk26m>; + clock-names = "ref"; + #phy-cells = <1>; + status = "okay"; + }; + + u2port1: usb-phy@11298000 { + reg = <0 0x11298000 0 0x700>; + clocks = <&clk26m>; + clock-names = "ref"; + #phy-cells = <1>; + status = "okay"; + }; + + u3port0: usb-phy@11298700 { + reg = <0 0x11298700 0 0x900>; + clocks = <&clk26m>; + clock-names = "ref"; + #phy-cells = <1>; + status = "okay"; + }; + }; + + ssusb1: usb@112c1000 { + compatible = "mediatek,mt2712-mtu3", "mediatek,mtu3"; + reg = <0 0x112c1000 0 0x3000>, + <0 0x112d0700 0 0x0100>; + reg-names = "mac", "ippc"; + interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_LOW>; + phys = <&u2port2 PHY_TYPE_USB2>, + <&u2port3 PHY_TYPE_USB2>, + <&u3port1 PHY_TYPE_USB3>; + power-domains = <&scpsys MT2712_POWER_DOMAIN_USB2>; + clocks = <&topckgen CLK_TOP_USB30_SEL>; + clock-names = "sys_ck"; + mediatek,syscon-wakeup = <&pericfg 0x514 2>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + usb_host1: xhci@112c0000 { + compatible = "mediatek,mt2712-xhci", + "mediatek,mtk-xhci"; + reg = <0 0x112c0000 0 0x1000>; + reg-names = "mac"; + interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&scpsys MT2712_POWER_DOMAIN_USB2>; + clocks = <&topckgen CLK_TOP_USB30_SEL>, <&clk26m>; + clock-names = "sys_ck", "ref_ck"; + status = "disabled"; + }; + }; + + u3phy1: usb-phy@112e0000 { + compatible = "mediatek,mt2712-u3phy"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "okay"; + + u2port2: usb-phy@112e0000 { + reg = <0 0x112e0000 0 0x700>; + clocks = <&clk26m>; + clock-names = "ref"; + #phy-cells = <1>; + status = "okay"; + }; + + u2port3: usb-phy@112e8000 { + reg = <0 0x112e8000 0 0x700>; + clocks = <&clk26m>; + clock-names = "ref"; + #phy-cells = <1>; + status = "okay"; + }; + + u3port1: usb-phy@112e8700 { + reg = <0 0x112e8700 0 0x900>; + clocks = <&clk26m>; + clock-names = "ref"; + #phy-cells = <1>; + status = "okay"; + }; + }; + + pcie: pcie@11700000 { + compatible = "mediatek,mt2712-pcie"; + device_type = "pci"; + reg = <0 0x11700000 0 0x1000>, + <0 0x112ff000 0 0x1000>; + reg-names = "port0", "port1"; + #address-cells = <3>; + #size-cells = <2>; + interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&topckgen CLK_TOP_PE2_MAC_P0_SEL>, + <&topckgen CLK_TOP_PE2_MAC_P1_SEL>, + <&pericfg CLK_PERI_PCIE0>, + <&pericfg CLK_PERI_PCIE1>; + clock-names = "sys_ck0", "sys_ck1", "ahb_ck0", "ahb_ck1"; + phys = <&u3port0 PHY_TYPE_PCIE>, <&u3port1 PHY_TYPE_PCIE>; + phy-names = "pcie-phy0", "pcie-phy1"; + bus-range = <0x00 0xff>; + ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x10000000>; + + pcie0: pcie@0,0 { + device_type = "pci"; + status = "disabled"; + reg = <0x0000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + num-lanes = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc0 0>, + <0 0 0 2 &pcie_intc0 1>, + <0 0 0 3 &pcie_intc0 2>, + <0 0 0 4 &pcie_intc0 3>; + pcie_intc0: interrupt-controller { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + }; + }; + + pcie1: pcie@1,0 { + device_type = "pci"; + status = "disabled"; + reg = <0x0800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + num-lanes = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc1 0>, + <0 0 0 2 &pcie_intc1 1>, + <0 0 0 3 &pcie_intc1 2>, + <0 0 0 4 &pcie_intc1 3>; + pcie_intc1: interrupt-controller { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + }; + }; + }; + mfgcfg: syscon@13000000 { compatible = "mediatek,mt2712-mfgcfg", "syscon"; reg = <0 0x13000000 0 0x1000>; @@ -417,12 +866,85 @@ #clock-cells = <1>; }; + larb0: larb@14021000 { + compatible = "mediatek,mt2712-smi-larb"; + reg = <0 0x14021000 0 0x1000>; + mediatek,smi = <&smi_common0>; + mediatek,larb-id = <0>; + power-domains = <&scpsys MT2712_POWER_DOMAIN_MM>; + clocks = <&mmsys CLK_MM_SMI_LARB0>, + <&mmsys CLK_MM_SMI_LARB0>; + clock-names = "apb", "smi"; + }; + + smi_common0: smi@14022000 { + compatible = "mediatek,mt2712-smi-common"; + reg = <0 0x14022000 0 0x1000>; + power-domains = <&scpsys MT2712_POWER_DOMAIN_MM>; + clocks = <&mmsys CLK_MM_SMI_COMMON>, + <&mmsys CLK_MM_SMI_COMMON>; + clock-names = "apb", "smi"; + }; + + larb4: larb@14027000 { + compatible = "mediatek,mt2712-smi-larb"; + reg = <0 0x14027000 0 0x1000>; + mediatek,smi = <&smi_common1>; + mediatek,larb-id = <4>; + power-domains = <&scpsys MT2712_POWER_DOMAIN_MM>; + clocks = <&mmsys CLK_MM_SMI_LARB4>, + <&mmsys CLK_MM_SMI_LARB4>; + clock-names = "apb", "smi"; + }; + + larb5: larb@14030000 { + compatible = "mediatek,mt2712-smi-larb"; + reg = <0 0x14030000 0 0x1000>; + mediatek,smi = <&smi_common1>; + mediatek,larb-id = <5>; + power-domains = <&scpsys MT2712_POWER_DOMAIN_MM>; + clocks = <&mmsys CLK_MM_SMI_LARB5>, + <&mmsys CLK_MM_SMI_LARB5>; + clock-names = "apb", "smi"; + }; + + smi_common1: smi@14031000 { + compatible = "mediatek,mt2712-smi-common"; + reg = <0 0x14031000 0 0x1000>; + power-domains = <&scpsys MT2712_POWER_DOMAIN_MM>; + clocks = <&mmsys CLK_MM_SMI_COMMON1>, + <&mmsys CLK_MM_SMI_COMMON1>; + clock-names = "apb", "smi"; + }; + + larb7: larb@14032000 { + compatible = "mediatek,mt2712-smi-larb"; + reg = <0 0x14032000 0 0x1000>; + mediatek,smi = <&smi_common1>; + mediatek,larb-id = <7>; + power-domains = <&scpsys MT2712_POWER_DOMAIN_MM>; + clocks = <&mmsys CLK_MM_SMI_LARB7>, + <&mmsys CLK_MM_SMI_LARB7>; + clock-names = "apb", "smi"; + }; + imgsys: syscon@15000000 { compatible = "mediatek,mt2712-imgsys", "syscon"; reg = <0 0x15000000 0 0x1000>; #clock-cells = <1>; }; + larb2: larb@15001000 { + compatible = "mediatek,mt2712-smi-larb"; + reg = <0 0x15001000 0 0x1000>; + mediatek,smi = <&smi_common0>; + mediatek,larb-id = <2>; + power-domains = <&scpsys MT2712_POWER_DOMAIN_ISP>; + clocks = <&imgsys CLK_IMG_SMI_LARB2>, + <&imgsys CLK_IMG_SMI_LARB2>; + clock-names = "apb", "smi"; + }; + bdpsys: syscon@15010000 { compatible = "mediatek,mt2712-bdpsys", "syscon"; reg = <0 0x15010000 0 0x1000>; @@ -435,12 +957,45 @@ #clock-cells = <1>; }; + larb1: larb@16010000 { + compatible = "mediatek,mt2712-smi-larb"; + reg = <0 0x16010000 0 0x1000>; + mediatek,smi = <&smi_common0>; + mediatek,larb-id = <1>; + power-domains = <&scpsys MT2712_POWER_DOMAIN_VDEC>; + clocks = <&vdecsys CLK_VDEC_CKEN>, + <&vdecsys CLK_VDEC_LARB1_CKEN>; + clock-names = "apb", "smi"; + }; + vencsys: syscon@18000000 { compatible = "mediatek,mt2712-vencsys", "syscon"; reg = <0 0x18000000 0 0x1000>; #clock-cells = <1>; }; + larb3: larb@18001000 { + compatible = "mediatek,mt2712-smi-larb"; + reg = <0 0x18001000 0 0x1000>; + mediatek,smi = <&smi_common0>; + mediatek,larb-id = <3>; + power-domains = <&scpsys MT2712_POWER_DOMAIN_VENC>; + clocks = <&vencsys CLK_VENC_SMI_COMMON_CON>, + <&vencsys CLK_VENC_VENC>; + clock-names = "apb", "smi"; + }; + + larb6: larb@18002000 { + compatible = "mediatek,mt2712-smi-larb"; + reg = <0 0x18002000 0 0x1000>; + mediatek,smi = <&smi_common0>; + mediatek,larb-id = <6>; + power-domains = <&scpsys MT2712_POWER_DOMAIN_VENC>; + clocks = <&vencsys CLK_VENC_SMI_COMMON_CON>, + <&vencsys CLK_VENC_VENC>; + clock-names = "apb", "smi"; + }; + jpgdecsys: syscon@19000000 { compatible = "mediatek,mt2712-jpgdecsys", "syscon"; reg = <0 0x19000000 0 0x1000>; diff --git a/dts/src/arm64/mediatek/mt6797-evb.dts b/dts/src/arm64/mediatek/mt6797-evb.dts index c79109c654..237e869a5f 100644 --- a/dts/src/arm64/mediatek/mt6797-evb.dts +++ b/dts/src/arm64/mediatek/mt6797-evb.dts @@ -33,4 +33,6 @@ &uart0 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; }; diff --git a/dts/src/arm64/mediatek/mt6797-x20-dev.dts b/dts/src/arm64/mediatek/mt6797-x20-dev.dts index 742938a1a5..13939d55b8 100644 --- a/dts/src/arm64/mediatek/mt6797-x20-dev.dts +++ b/dts/src/arm64/mediatek/mt6797-x20-dev.dts @@ -30,4 +30,6 @@ &uart1 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins_a>; }; diff --git a/dts/src/arm64/mediatek/mt6797.dtsi b/dts/src/arm64/mediatek/mt6797.dtsi index 4beaa71107..2b2a69c756 100644 --- a/dts/src/arm64/mediatek/mt6797.dtsi +++ b/dts/src/arm64/mediatek/mt6797.dtsi @@ -14,6 +14,7 @@ #include <dt-bindings/clock/mt6797-clk.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/pinctrl/mt6797-pinfunc.h> / { compatible = "mediatek,mt6797"; @@ -129,6 +130,33 @@ #clock-cells = <1>; }; + pio: pinctrl@10005000 { + compatible = "mediatek,mt6797-pinctrl"; + reg = <0 0x10005000 0 0x1000>, + <0 0x10002000 0 0x400>, + <0 0x10002400 0 0x400>, + <0 0x10002800 0 0x400>, + <0 0x10002C00 0 0x400>; + reg-names = "gpio", "iocfgl", "iocfgb", + "iocfgr", "iocfgt"; + gpio-controller; + #gpio-cells = <2>; + + uart0_pins_a: uart0 { + pins0 { + pinmux = <MT6797_GPIO234__FUNC_UTXD0>, + <MT6797_GPIO235__FUNC_URXD0>; + }; + }; + + uart1_pins_a: uart1 { + pins1 { + pinmux = <MT6797_GPIO232__FUNC_URXD1>, + <MT6797_GPIO233__FUNC_UTXD1>; + }; + }; + }; + scpsys: scpsys@10006000 { compatible = "mediatek,mt6797-scpsys"; #power-domain-cells = <1>; diff --git a/dts/src/arm64/mediatek/mt7622.dtsi b/dts/src/arm64/mediatek/mt7622.dtsi index 8fc4aa77f0..4b1f5ae710 100644 --- a/dts/src/arm64/mediatek/mt7622.dtsi +++ b/dts/src/arm64/mediatek/mt7622.dtsi @@ -70,7 +70,7 @@ cpu0: cpu@0 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x0>; clocks = <&infracfg CLK_INFRA_MUX1_SEL>, <&apmixedsys CLK_APMIXED_MAIN_CORE_EN>; @@ -84,7 +84,7 @@ cpu1: cpu@1 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x1>; clocks = <&infracfg CLK_INFRA_MUX1_SEL>, <&apmixedsys CLK_APMIXED_MAIN_CORE_EN>; @@ -170,17 +170,20 @@ cooling-maps { map0 { trip = <&cpu_passive>; - cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; map1 { trip = <&cpu_active>; - cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; map2 { trip = <&cpu_hot>; - cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; }; diff --git a/dts/src/arm64/mediatek/mt8173.dtsi b/dts/src/arm64/mediatek/mt8173.dtsi index 412ffd4d42..c3c360161c 100644 --- a/dts/src/arm64/mediatek/mt8173.dtsi +++ b/dts/src/arm64/mediatek/mt8173.dtsi @@ -276,12 +276,14 @@ cooling-maps { map@0 { trip = <&target>; - cooling-device = <&cpu0 0 0>; + cooling-device = <&cpu0 0 0>, + <&cpu1 0 0>; contribution = <3072>; }; map@1 { trip = <&target>; - cooling-device = <&cpu2 0 0>; + cooling-device = <&cpu2 0 0>, + <&cpu3 0 0>; contribution = <1024>; }; }; diff --git a/dts/src/arm64/nvidia/tegra132.dtsi b/dts/src/arm64/nvidia/tegra132.dtsi index fa5a7c4bc8..631a7f77c3 100644 --- a/dts/src/arm64/nvidia/tegra132.dtsi +++ b/dts/src/arm64/nvidia/tegra132.dtsi @@ -1082,13 +1082,13 @@ cpu@0 { device_type = "cpu"; - compatible = "nvidia,denver", "arm,armv8"; + compatible = "nvidia,denver"; reg = <0>; }; cpu@1 { device_type = "cpu"; - compatible = "nvidia,denver", "arm,armv8"; + compatible = "nvidia,denver"; reg = <1>; }; }; diff --git a/dts/src/arm64/nvidia/tegra186-p2771-0000.dts b/dts/src/arm64/nvidia/tegra186-p2771-0000.dts index 65487eee2c..31457f32e4 100644 --- a/dts/src/arm64/nvidia/tegra186-p2771-0000.dts +++ b/dts/src/arm64/nvidia/tegra186-p2771-0000.dts @@ -26,7 +26,8 @@ reg = <0x74>; interrupt-parent = <&gpio>; - interrupts = <TEGRA_MAIN_GPIO(Y, 0) GPIO_ACTIVE_LOW>; + interrupts = <TEGRA186_MAIN_GPIO(Y, 0) + GPIO_ACTIVE_LOW>; #gpio-cells = <2>; gpio-controller; @@ -37,7 +38,8 @@ reg = <0x77>; interrupt-parent = <&gpio>; - interrupts = <TEGRA_MAIN_GPIO(Y, 6) GPIO_ACTIVE_LOW>; + interrupts = <TEGRA186_MAIN_GPIO(Y, 6) + GPIO_ACTIVE_LOW>; #gpio-cells = <2>; gpio-controller; @@ -52,6 +54,7 @@ }; hda@3510000 { + nvidia,model = "jetson-tx2-hda"; status = "okay"; }; @@ -108,7 +111,8 @@ hdmi-supply = <&vdd_hdmi>; nvidia,ddc-i2c-bus = <&ddc>; - nvidia,hpd-gpio = <&gpio TEGRA_MAIN_GPIO(P, 1) GPIO_ACTIVE_LOW>; + nvidia,hpd-gpio = <&gpio TEGRA186_MAIN_GPIO(P, 1) + GPIO_ACTIVE_LOW>; }; dpaux@155c0000 { @@ -121,7 +125,7 @@ power { label = "Power"; - gpios = <&gpio_aon TEGRA_AON_GPIO(FF, 0) + gpios = <&gpio_aon TEGRA186_AON_GPIO(FF, 0) GPIO_ACTIVE_LOW>; linux,input-type = <EV_KEY>; linux,code = <KEY_POWER>; @@ -132,7 +136,7 @@ volume-up { label = "Volume Up"; - gpios = <&gpio_aon TEGRA_AON_GPIO(FF, 1) + gpios = <&gpio_aon TEGRA186_AON_GPIO(FF, 1) GPIO_ACTIVE_LOW>; linux,input-type = <EV_KEY>; linux,code = <KEY_VOLUMEUP>; @@ -141,7 +145,7 @@ volume-down { label = "Volume Down"; - gpios = <&gpio_aon TEGRA_AON_GPIO(FF, 2) + gpios = <&gpio_aon TEGRA186_AON_GPIO(FF, 2) GPIO_ACTIVE_LOW>; linux,input-type = <EV_KEY>; linux,code = <KEY_VOLUMEDOWN>; @@ -158,7 +162,8 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpio = <&gpio TEGRA_MAIN_GPIO(P, 6) GPIO_ACTIVE_HIGH>; + gpio = <&gpio TEGRA186_MAIN_GPIO(P, 6) + GPIO_ACTIVE_HIGH>; enable-active-high; vin-supply = <&vdd_3v3_sys>; diff --git a/dts/src/arm64/nvidia/tegra186-p3310.dtsi b/dts/src/arm64/nvidia/tegra186-p3310.dtsi index b539561e78..89a2da46ef 100644 --- a/dts/src/arm64/nvidia/tegra186-p3310.dtsi +++ b/dts/src/arm64/nvidia/tegra186-p3310.dtsi @@ -34,7 +34,8 @@ ethernet@2490000 { status = "okay"; - phy-reset-gpios = <&gpio TEGRA_MAIN_GPIO(M, 4) GPIO_ACTIVE_LOW>; + phy-reset-gpios = <&gpio TEGRA186_MAIN_GPIO(M, 4) + GPIO_ACTIVE_LOW>; phy-handle = <&phy>; phy-mode = "rgmii"; @@ -46,7 +47,8 @@ compatible = "ethernet-phy-ieee802.3-c22"; reg = <0x0>; interrupt-parent = <&gpio>; - interrupts = <TEGRA_MAIN_GPIO(M, 5) IRQ_TYPE_LEVEL_LOW>; + interrupts = <TEGRA186_MAIN_GPIO(M, 5) + IRQ_TYPE_LEVEL_LOW>; }; }; }; @@ -91,8 +93,8 @@ /* SDMMC1 (SD/MMC) */ sdhci@3400000 { - cd-gpios = <&gpio TEGRA_MAIN_GPIO(P, 5) GPIO_ACTIVE_LOW>; - wp-gpios = <&gpio TEGRA_MAIN_GPIO(P, 4) GPIO_ACTIVE_HIGH>; + cd-gpios = <&gpio TEGRA186_MAIN_GPIO(P, 5) GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio TEGRA186_MAIN_GPIO(P, 4) GPIO_ACTIVE_HIGH>; vqmmc-supply = <&vddio_sdmmc1>; }; diff --git a/dts/src/arm64/nvidia/tegra186.dtsi b/dts/src/arm64/nvidia/tegra186.dtsi index 22815db4a3..97aeb946ed 100644 --- a/dts/src/arm64/nvidia/tegra186.dtsi +++ b/dts/src/arm64/nvidia/tegra186.dtsi @@ -136,7 +136,7 @@ }; gen1_i2c: i2c@3160000 { - compatible = "nvidia,tegra186-i2c", "nvidia,tegra114-i2c"; + compatible = "nvidia,tegra186-i2c", "nvidia,tegra210-i2c"; reg = <0x0 0x03160000 0x0 0x10000>; interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -149,7 +149,7 @@ }; cam_i2c: i2c@3180000 { - compatible = "nvidia,tegra186-i2c", "nvidia,tegra114-i2c"; + compatible = "nvidia,tegra186-i2c", "nvidia,tegra210-i2c"; reg = <0x0 0x03180000 0x0 0x10000>; interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -163,7 +163,7 @@ /* shares pads with dpaux1 */ dp_aux_ch1_i2c: i2c@3190000 { - compatible = "nvidia,tegra186-i2c", "nvidia,tegra114-i2c"; + compatible = "nvidia,tegra186-i2c", "nvidia,tegra210-i2c"; reg = <0x0 0x03190000 0x0 0x10000>; interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -177,7 +177,7 @@ /* controlled by BPMP, should not be enabled */ pwr_i2c: i2c@31a0000 { - compatible = "nvidia,tegra186-i2c", "nvidia,tegra114-i2c"; + compatible = "nvidia,tegra186-i2c", "nvidia,tegra210-i2c"; reg = <0x0 0x031a0000 0x0 0x10000>; interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -191,7 +191,7 @@ /* shares pads with dpaux0 */ dp_aux_ch0_i2c: i2c@31b0000 { - compatible = "nvidia,tegra186-i2c", "nvidia,tegra114-i2c"; + compatible = "nvidia,tegra186-i2c", "nvidia,tegra210-i2c"; reg = <0x0 0x031b0000 0x0 0x10000>; interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -204,7 +204,7 @@ }; gen7_i2c: i2c@31c0000 { - compatible = "nvidia,tegra186-i2c", "nvidia,tegra114-i2c"; + compatible = "nvidia,tegra186-i2c", "nvidia,tegra210-i2c"; reg = <0x0 0x031c0000 0x0 0x10000>; interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -217,7 +217,7 @@ }; gen9_i2c: i2c@31e0000 { - compatible = "nvidia,tegra186-i2c", "nvidia,tegra114-i2c"; + compatible = "nvidia,tegra186-i2c", "nvidia,tegra210-i2c"; reg = <0x0 0x031e0000 0x0 0x10000>; interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -315,6 +315,8 @@ nvidia,pad-autocal-pull-down-offset-hs400 = <0x05>; nvidia,pad-autocal-pull-up-offset-1v8-timeout = <0x0a>; nvidia,pad-autocal-pull-down-offset-1v8-timeout = <0x0a>; + nvidia,pad-autocal-pull-up-offset-3v3-timeout = <0x0a>; + nvidia,pad-autocal-pull-down-offset-3v3-timeout = <0x0a>; nvidia,default-tap = <0x5>; nvidia,default-trim = <0x9>; nvidia,dqs-trim = <63>; @@ -375,7 +377,7 @@ }; gen2_i2c: i2c@c240000 { - compatible = "nvidia,tegra186-i2c", "nvidia,tegra114-i2c"; + compatible = "nvidia,tegra186-i2c", "nvidia,tegra210-i2c"; reg = <0x0 0x0c240000 0x0 0x10000>; interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -388,7 +390,7 @@ }; gen8_i2c: i2c@c250000 { - compatible = "nvidia,tegra186-i2c", "nvidia,tegra114-i2c"; + compatible = "nvidia,tegra186-i2c", "nvidia,tegra210-i2c"; reg = <0x0 0x0c250000 0x0 0x10000>; interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -982,37 +984,37 @@ #size-cells = <0>; cpu@0 { - compatible = "nvidia,tegra186-denver", "arm,armv8"; + compatible = "nvidia,tegra186-denver"; device_type = "cpu"; reg = <0x000>; }; cpu@1 { - compatible = "nvidia,tegra186-denver", "arm,armv8"; + compatible = "nvidia,tegra186-denver"; device_type = "cpu"; reg = <0x001>; }; cpu@2 { - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; device_type = "cpu"; reg = <0x100>; }; cpu@3 { - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; device_type = "cpu"; reg = <0x101>; }; cpu@4 { - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; device_type = "cpu"; reg = <0x102>; }; cpu@5 { - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; device_type = "cpu"; reg = <0x103>; }; diff --git a/dts/src/arm64/nvidia/tegra194-p2888.dtsi b/dts/src/arm64/nvidia/tegra194-p2888.dtsi index 22a1c267ae..246c1ebbd0 100644 --- a/dts/src/arm64/nvidia/tegra194-p2888.dtsi +++ b/dts/src/arm64/nvidia/tegra194-p2888.dtsi @@ -10,7 +10,7 @@ aliases { sdhci0 = "/cbb/sdhci@3460000"; sdhci1 = "/cbb/sdhci@3400000"; - serial0 = &uartb; + serial0 = &tcu; i2c0 = "/bpmp/i2c"; i2c1 = "/cbb/i2c@3160000"; i2c2 = "/cbb/i2c@c240000"; diff --git a/dts/src/arm64/nvidia/tegra194-p2972-0000.dts b/dts/src/arm64/nvidia/tegra194-p2972-0000.dts index adf351010f..b62e969458 100644 --- a/dts/src/arm64/nvidia/tegra194-p2972-0000.dts +++ b/dts/src/arm64/nvidia/tegra194-p2972-0000.dts @@ -11,20 +11,21 @@ compatible = "nvidia,p2972-0000", "nvidia,tegra194"; cbb { - /* SDMMC1 (SD/MMC) */ - sdhci@3400000 { + ddc: i2c@31c0000 { status = "okay"; }; - ddc: i2c@31c0000 { + /* SDMMC1 (SD/MMC) */ + sdhci@3400000 { status = "okay"; }; - pwm@c340000 { + hda@3510000 { + nvidia,model = "jetson-xavier-hda"; status = "okay"; }; - hda@3510000 { + pwm@c340000 { status = "okay"; }; diff --git a/dts/src/arm64/nvidia/tegra194.dtsi b/dts/src/arm64/nvidia/tegra194.dtsi index 6dfa1ca0b8..c77ca211fa 100644 --- a/dts/src/arm64/nvidia/tegra194.dtsi +++ b/dts/src/arm64/nvidia/tegra194.dtsi @@ -303,6 +303,17 @@ clock-names = "sdhci"; resets = <&bpmp TEGRA194_RESET_SDMMC1>; reset-names = "sdhci"; + nvidia,pad-autocal-pull-up-offset-3v3-timeout = + <0x07>; + nvidia,pad-autocal-pull-down-offset-3v3-timeout = + <0x07>; + nvidia,pad-autocal-pull-up-offset-1v8-timeout = <0x06>; + nvidia,pad-autocal-pull-down-offset-1v8-timeout = + <0x07>; + nvidia,pad-autocal-pull-up-offset-sdr104 = <0x00>; + nvidia,pad-autocal-pull-down-offset-sdr104 = <0x00>; + nvidia,default-tap = <0x9>; + nvidia,default-trim = <0x5>; status = "disabled"; }; @@ -314,6 +325,18 @@ clock-names = "sdhci"; resets = <&bpmp TEGRA194_RESET_SDMMC3>; reset-names = "sdhci"; + nvidia,pad-autocal-pull-up-offset-1v8 = <0x00>; + nvidia,pad-autocal-pull-down-offset-1v8 = <0x7a>; + nvidia,pad-autocal-pull-up-offset-3v3-timeout = <0x07>; + nvidia,pad-autocal-pull-down-offset-3v3-timeout = + <0x07>; + nvidia,pad-autocal-pull-up-offset-1v8-timeout = <0x06>; + nvidia,pad-autocal-pull-down-offset-1v8-timeout = + <0x07>; + nvidia,pad-autocal-pull-up-offset-sdr104 = <0x00>; + nvidia,pad-autocal-pull-down-offset-sdr104 = <0x00>; + nvidia,default-tap = <0x9>; + nvidia,default-trim = <0x5>; status = "disabled"; }; @@ -323,8 +346,24 @@ interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; clocks = <&bpmp TEGRA194_CLK_SDMMC4>; clock-names = "sdhci"; + assigned-clocks = <&bpmp TEGRA194_CLK_SDMMC4>, + <&bpmp TEGRA194_CLK_PLLC4>; + assigned-clock-parents = + <&bpmp TEGRA194_CLK_PLLC4>; resets = <&bpmp TEGRA194_RESET_SDMMC4>; reset-names = "sdhci"; + nvidia,pad-autocal-pull-up-offset-hs400 = <0x00>; + nvidia,pad-autocal-pull-down-offset-hs400 = <0x00>; + nvidia,pad-autocal-pull-up-offset-1v8-timeout = <0x0a>; + nvidia,pad-autocal-pull-down-offset-1v8-timeout = + <0x0a>; + nvidia,pad-autocal-pull-up-offset-3v3-timeout = <0x0a>; + nvidia,pad-autocal-pull-down-offset-3v3-timeout = + <0x0a>; + nvidia,default-tap = <0x8>; + nvidia,default-trim = <0x14>; + nvidia,dqs-trim = <40>; + supports-cqe; status = "disabled"; }; @@ -367,10 +406,35 @@ }; hsp_top0: hsp@3c00000 { - compatible = "nvidia,tegra186-hsp"; + compatible = "nvidia,tegra194-hsp", "nvidia,tegra186-hsp"; reg = <0x03c00000 0xa0000>; - interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "doorbell"; + interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "doorbell", "shared0", "shared1", "shared2", + "shared3", "shared4", "shared5", "shared6", + "shared7"; + #mbox-cells = <2>; + }; + + hsp_aon: hsp@c150000 { + compatible = "nvidia,tegra194-hsp", "nvidia,tegra186-hsp"; + reg = <0x0c150000 0xa0000>; + interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>; + /* + * Shared interrupt 0 is routed only to AON/SPE, so + * we only have 4 shared interrupts for the CCPLEX. + */ + interrupt-names = "shared1", "shared2", "shared3", "shared4"; #mbox-cells = <2>; }; @@ -871,56 +935,56 @@ #size-cells = <0>; cpu@0 { - compatible = "nvidia,tegra194-carmel", "arm,armv8"; + compatible = "nvidia,tegra194-carmel"; device_type = "cpu"; reg = <0x10000>; enable-method = "psci"; }; cpu@1 { - compatible = "nvidia,tegra194-carmel", "arm,armv8"; + compatible = "nvidia,tegra194-carmel"; device_type = "cpu"; reg = <0x10001>; enable-method = "psci"; }; cpu@2 { - compatible = "nvidia,tegra194-carmel", "arm,armv8"; + compatible = "nvidia,tegra194-carmel"; device_type = "cpu"; reg = <0x100>; enable-method = "psci"; }; cpu@3 { - compatible = "nvidia,tegra194-carmel", "arm,armv8"; + compatible = "nvidia,tegra194-carmel"; device_type = "cpu"; reg = <0x101>; enable-method = "psci"; }; cpu@4 { - compatible = "nvidia,tegra194-carmel", "arm,armv8"; + compatible = "nvidia,tegra194-carmel"; device_type = "cpu"; reg = <0x200>; enable-method = "psci"; }; cpu@5 { - compatible = "nvidia,tegra194-carmel", "arm,armv8"; + compatible = "nvidia,tegra194-carmel"; device_type = "cpu"; reg = <0x201>; enable-method = "psci"; }; cpu@6 { - compatible = "nvidia,tegra194-carmel", "arm,armv8"; + compatible = "nvidia,tegra194-carmel"; device_type = "cpu"; reg = <0x10300>; enable-method = "psci"; }; cpu@7 { - compatible = "nvidia,tegra194-carmel", "arm,armv8"; + compatible = "nvidia,tegra194-carmel"; device_type = "cpu"; reg = <0x10301>; enable-method = "psci"; @@ -933,6 +997,13 @@ method = "smc"; }; + tcu: tcu { + compatible = "nvidia,tegra194-tcu"; + mboxes = <&hsp_top0 TEGRA_HSP_MBOX_TYPE_SM TEGRA_HSP_SM_RX(0)>, + <&hsp_aon TEGRA_HSP_MBOX_TYPE_SM TEGRA_HSP_SM_TX(1)>; + mbox-names = "rx", "tx"; + }; + thermal-zones { cpu { thermal-sensors = <&{/bpmp/thermal} diff --git a/dts/src/arm64/nvidia/tegra210-p2371-2180.dts b/dts/src/arm64/nvidia/tegra210-p2371-2180.dts index 37e3c46e75..9fad0d2727 100644 --- a/dts/src/arm64/nvidia/tegra210-p2371-2180.dts +++ b/dts/src/arm64/nvidia/tegra210-p2371-2180.dts @@ -78,4 +78,25 @@ }; }; }; + + clock@70110000 { + status = "okay"; + + nvidia,cf = <6>; + nvidia,ci = <0>; + nvidia,cg = <2>; + nvidia,droop-ctrl = <0x00000f00>; + nvidia,force-mode = <1>; + nvidia,sample-rate = <25000>; + + nvidia,pwm-min-microvolts = <708000>; + nvidia,pwm-period-nanoseconds = <2500>; /* 2.5us */ + nvidia,pwm-to-pmic; + nvidia,pwm-tristate-microvolts = <1000000>; + nvidia,pwm-voltage-step-microvolts = <19200>; + + pinctrl-names = "dvfs_pwm_enable", "dvfs_pwm_disable"; + pinctrl-0 = <&dvfs_pwm_active_state>; + pinctrl-1 = <&dvfs_pwm_inactive_state>; + }; }; diff --git a/dts/src/arm64/nvidia/tegra210-p2597.dtsi b/dts/src/arm64/nvidia/tegra210-p2597.dtsi index a96e6ee70c..95e890d8a1 100644 --- a/dts/src/arm64/nvidia/tegra210-p2597.dtsi +++ b/dts/src/arm64/nvidia/tegra210-p2597.dtsi @@ -1278,6 +1278,20 @@ nvidia,open-drain = <TEGRA_PIN_DISABLE>; }; }; + + dvfs_pwm_active_state: dvfs_pwm_active { + dvfs_pwm_pbb1 { + nvidia,pins = "dvfs_pwm_pbb1"; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + }; + + dvfs_pwm_inactive_state: dvfs_pwm_inactive { + dvfs_pwm_pbb1 { + nvidia,pins = "dvfs_pwm_pbb1"; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + }; + }; }; pwm@7000a000 { @@ -1303,6 +1317,16 @@ clock-frequency = <100000>; }; + sata@70020000 { + status = "okay"; + phys = <&{/padctl@7009f000/pads/sata/lanes/sata-0}>; + }; + + hda@70030000 { + nvidia,model = "jetson-tx1-hda"; + status = "okay"; + }; + usb@70090000 { phys = <&{/padctl@7009f000/pads/usb2/lanes/usb2-0}>, <&{/padctl@7009f000/pads/usb2/lanes/usb2-1}>, @@ -1325,15 +1349,6 @@ status = "okay"; }; - sata@70020000 { - status = "okay"; - phys = <&{/padctl@7009f000/pads/sata/lanes/sata-0}>; - }; - - hda@70030000 { - status = "okay"; - }; - padctl@7009f000 { status = "okay"; diff --git a/dts/src/arm64/nvidia/tegra210-p2894-0050-a08.dts b/dts/src/arm64/nvidia/tegra210-p2894-0050-a08.dts new file mode 100644 index 0000000000..7ffb351b58 --- /dev/null +++ b/dts/src/arm64/nvidia/tegra210-p2894-0050-a08.dts @@ -0,0 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; + +#include "tegra210-p2894.dtsi" + +/ { + model = "NVIDIA Shield TV"; + compatible = "nvidia,p2894-0050-a08", "nvidia,darcy", "nvidia,tegra210"; +}; diff --git a/dts/src/arm64/nvidia/tegra210-p2894.dtsi b/dts/src/arm64/nvidia/tegra210-p2894.dtsi new file mode 100644 index 0000000000..3ddf173ccc --- /dev/null +++ b/dts/src/arm64/nvidia/tegra210-p2894.dtsi @@ -0,0 +1,1858 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include <dt-bindings/input/input.h> +#include <dt-bindings/input/gpio-keys.h> +#include <dt-bindings/mfd/max77620.h> +#include <dt-bindings/pinctrl/pinctrl-tegra.h> +#include "tegra210.dtsi" + +/ { + aliases { + serial0 = &uarta; + }; + + chosen { + bootargs = "earlycon"; + stdout-path = "serial0:115200n8"; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x80000000 0x0 0xc0000000>; + }; + + pinmux: pinmux@700008d4 { + status = "okay"; + pinctrl-names = "boot"; + pinctrl-0 = <&state_boot>; + + state_boot: pinmux { + pex_l0_rst_n_pa0 { + nvidia,pins = "pex_l0_rst_n_pa0"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,io-hv = <TEGRA_PIN_DISABLE>; + }; + pex_l0_clkreq_n_pa1 { + nvidia,pins = "pex_l0_clkreq_n_pa1"; + nvidia,function = "pe0"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,io-hv = <TEGRA_PIN_ENABLE>; + }; + pex_wake_n_pa2 { + nvidia,pins = "pex_wake_n_pa2"; + nvidia,function = "pe"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,io-hv = <TEGRA_PIN_ENABLE>; + }; + pex_l1_rst_n_pa3 { + nvidia,pins = "pex_l1_rst_n_pa3"; + nvidia,function = "pe1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,io-hv = <TEGRA_PIN_ENABLE>; + }; + pex_l1_clkreq_n_pa4 { + nvidia,pins = "pex_l1_clkreq_n_pa4"; + nvidia,function = "pe1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,io-hv = <TEGRA_PIN_ENABLE>; + }; + sata_led_active_pa5 { + nvidia,pins = "sata_led_active_pa5"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pa6 { + nvidia,pins = "pa6"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + dap1_fs_pb0 { + nvidia,pins = "dap1_fs_pb0"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + dap1_din_pb1 { + nvidia,pins = "dap1_din_pb1"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + dap1_dout_pb2 { + nvidia,pins = "dap1_dout_pb2"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + dap1_sclk_pb3 { + nvidia,pins = "dap1_sclk_pb3"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + spi2_mosi_pb4 { + nvidia,pins = "spi2_mosi_pb4"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + spi2_miso_pb5 { + nvidia,pins = "spi2_miso_pb5"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + spi2_sck_pb6 { + nvidia,pins = "spi2_sck_pb6"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + spi2_cs0_pb7 { + nvidia,pins = "spi2_cs0_pb7"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + spi1_mosi_pc0 { + nvidia,pins = "spi1_mosi_pc0"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + spi1_miso_pc1 { + nvidia,pins = "spi1_miso_pc1"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + spi1_sck_pc2 { + nvidia,pins = "spi1_sck_pc2"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + spi1_cs0_pc3 { + nvidia,pins = "spi1_cs0_pc3"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + spi1_cs1_pc4 { + nvidia,pins = "spi1_cs1_pc4"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + spi4_sck_pc5 { + nvidia,pins = "spi4_sck_pc5"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + spi4_cs0_pc6 { + nvidia,pins = "spi4_cs0_pc6"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + spi4_mosi_pc7 { + nvidia,pins = "spi4_mosi_pc7"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + spi4_miso_pd0 { + nvidia,pins = "spi4_miso_pd0"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + uart3_tx_pd1 { + nvidia,pins = "uart3_tx_pd1"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + uart3_rx_pd2 { + nvidia,pins = "uart3_rx_pd2"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + uart3_rts_pd3 { + nvidia,pins = "uart3_rts_pd3"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + uart3_cts_pd4 { + nvidia,pins = "uart3_cts_pd4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + dmic1_clk_pe0 { + nvidia,pins = "dmic1_clk_pe0"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + dmic1_dat_pe1 { + nvidia,pins = "dmic1_dat_pe1"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + dmic2_clk_pe2 { + nvidia,pins = "dmic2_clk_pe2"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + dmic2_dat_pe3 { + nvidia,pins = "dmic2_dat_pe3"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + dmic3_clk_pe4 { + nvidia,pins = "dmic3_clk_pe4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + dmic3_dat_pe5 { + nvidia,pins = "dmic3_dat_pe5"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pe6 { + nvidia,pins = "pe6"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pe7 { + nvidia,pins = "pe7"; + nvidia,function = "pwm3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + gen3_i2c_scl_pf0 { + nvidia,pins = "gen3_i2c_scl_pf0"; + nvidia,function = "i2c3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,io-hv = <TEGRA_PIN_DISABLE>; + }; + gen3_i2c_sda_pf1 { + nvidia,pins = "gen3_i2c_sda_pf1"; + nvidia,function = "i2c3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,io-hv = <TEGRA_PIN_DISABLE>; + }; + uart2_tx_pg0 { + nvidia,pins = "uart2_tx_pg0"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + uart2_rx_pg1 { + nvidia,pins = "uart2_rx_pg1"; + nvidia,function = "uartb"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + uart2_rts_pg2 { + nvidia,pins = "uart2_rts_pg2"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + uart2_cts_pg3 { + nvidia,pins = "uart2_cts_pg3"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + wifi_en_ph0 { + nvidia,pins = "wifi_en_ph0"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + wifi_rst_ph1 { + nvidia,pins = "wifi_rst_ph1"; + nvidia,function = "rsvd0"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + wifi_wake_ap_ph2 { + nvidia,pins = "wifi_wake_ap_ph2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + ap_wake_bt_ph3 { + nvidia,pins = "ap_wake_bt_ph3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + bt_rst_ph4 { + nvidia,pins = "bt_rst_ph4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + bt_wake_ap_ph5 { + nvidia,pins = "bt_wake_ap_ph5"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + ph6 { + nvidia,pins = "ph6"; + nvidia,function = "rsvd0"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + ap_wake_nfc_ph7 { + nvidia,pins = "ap_wake_nfc_ph7"; + nvidia,function = "rsvd0"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + nfc_en_pi0 { + nvidia,pins = "nfc_en_pi0"; + nvidia,function = "rsvd0"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + nfc_int_pi1 { + nvidia,pins = "nfc_int_pi1"; + nvidia,function = "rsvd0"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + gps_en_pi2 { + nvidia,pins = "gps_en_pi2"; + nvidia,function = "rsvd0"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + gps_rst_pi3 { + nvidia,pins = "gps_rst_pi3"; + nvidia,function = "rsvd0"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + uart4_tx_pi4 { + nvidia,pins = "uart4_tx_pi4"; + nvidia,function = "uartd"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + uart4_rx_pi5 { + nvidia,pins = "uart4_rx_pi5"; + nvidia,function = "uartd"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + uart4_rts_pi6 { + nvidia,pins = "uart4_rts_pi6"; + nvidia,function = "uartd"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + uart4_cts_pi7 { + nvidia,pins = "uart4_cts_pi7"; + nvidia,function = "uartd"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + gen1_i2c_sda_pj0 { + nvidia,pins = "gen1_i2c_sda_pj0"; + nvidia,function = "i2c1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,io-hv = <TEGRA_PIN_DISABLE>; + }; + gen1_i2c_scl_pj1 { + nvidia,pins = "gen1_i2c_scl_pj1"; + nvidia,function = "i2c1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,io-hv = <TEGRA_PIN_DISABLE>; + }; + gen2_i2c_scl_pj2 { + nvidia,pins = "gen2_i2c_scl_pj2"; + nvidia,function = "i2c2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,io-hv = <TEGRA_PIN_ENABLE>; + }; + gen2_i2c_sda_pj3 { + nvidia,pins = "gen2_i2c_sda_pj3"; + nvidia,function = "i2c2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,io-hv = <TEGRA_PIN_ENABLE>; + }; + dap4_fs_pj4 { + nvidia,pins = "dap4_fs_pj4"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + dap4_din_pj5 { + nvidia,pins = "dap4_din_pj5"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + dap4_dout_pj6 { + nvidia,pins = "dap4_dout_pj6"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + dap4_sclk_pj7 { + nvidia,pins = "dap4_sclk_pj7"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pk0 { + nvidia,pins = "pk0"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pk1 { + nvidia,pins = "pk1"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pk2 { + nvidia,pins = "pk2"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pk3 { + nvidia,pins = "pk3"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pk4 { + nvidia,pins = "pk4"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pk5 { + nvidia,pins = "pk5"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pk6 { + nvidia,pins = "pk6"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pk7 { + nvidia,pins = "pk7"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pl0 { + nvidia,pins = "pl0"; + nvidia,function = "rsvd0"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pl1 { + nvidia,pins = "pl1"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + sdmmc1_clk_pm0 { + nvidia,pins = "sdmmc1_clk_pm0"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + sdmmc1_cmd_pm1 { + nvidia,pins = "sdmmc1_cmd_pm1"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + sdmmc1_dat3_pm2 { + nvidia,pins = "sdmmc1_dat3_pm2"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + sdmmc1_dat2_pm3 { + nvidia,pins = "sdmmc1_dat2_pm3"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + sdmmc1_dat1_pm4 { + nvidia,pins = "sdmmc1_dat1_pm4"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + sdmmc1_dat0_pm5 { + nvidia,pins = "sdmmc1_dat0_pm5"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + sdmmc3_clk_pp0 { + nvidia,pins = "sdmmc3_clk_pp0"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + sdmmc3_cmd_pp1 { + nvidia,pins = "sdmmc3_cmd_pp1"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + sdmmc3_dat3_pp2 { + nvidia,pins = "sdmmc3_dat3_pp2"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + sdmmc3_dat2_pp3 { + nvidia,pins = "sdmmc3_dat2_pp3"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + sdmmc3_dat1_pp4 { + nvidia,pins = "sdmmc3_dat1_pp4"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + sdmmc3_dat0_pp5 { + nvidia,pins = "sdmmc3_dat0_pp5"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + cam1_mclk_ps0 { + nvidia,pins = "cam1_mclk_ps0"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + cam2_mclk_ps1 { + nvidia,pins = "cam2_mclk_ps1"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + cam_i2c_scl_ps2 { + nvidia,pins = "cam_i2c_scl_ps2"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,io-hv = <TEGRA_PIN_DISABLE>; + }; + cam_i2c_sda_ps3 { + nvidia,pins = "cam_i2c_sda_ps3"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,io-hv = <TEGRA_PIN_DISABLE>; + }; + cam_rst_ps4 { + nvidia,pins = "cam_rst_ps4"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + cam_af_en_ps5 { + nvidia,pins = "cam_af_en_ps5"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + cam_flash_en_ps6 { + nvidia,pins = "cam_flash_en_ps6"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + cam1_pwdn_ps7 { + nvidia,pins = "cam1_pwdn_ps7"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + cam2_pwdn_pt0 { + nvidia,pins = "cam2_pwdn_pt0"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + cam1_strobe_pt1 { + nvidia,pins = "cam1_strobe_pt1"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + uart1_tx_pu0 { + nvidia,pins = "uart1_tx_pu0"; + nvidia,function = "uarta"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + uart1_rx_pu1 { + nvidia,pins = "uart1_rx_pu1"; + nvidia,function = "uarta"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + uart1_rts_pu2 { + nvidia,pins = "uart1_rts_pu2"; + nvidia,function = "uarta"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + uart1_cts_pu3 { + nvidia,pins = "uart1_cts_pu3"; + nvidia,function = "uarta"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + lcd_bl_pwm_pv0 { + nvidia,pins = "lcd_bl_pwm_pv0"; + nvidia,function = "pwm0"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + lcd_bl_en_pv1 { + nvidia,pins = "lcd_bl_en_pv1"; + nvidia,function = "rsvd0"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + lcd_rst_pv2 { + nvidia,pins = "lcd_rst_pv2"; + nvidia,function = "rsvd0"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + lcd_gpio1_pv3 { + nvidia,pins = "lcd_gpio1_pv3"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + lcd_gpio2_pv4 { + nvidia,pins = "lcd_gpio2_pv4"; + nvidia,function = "pwm1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + ap_ready_pv5 { + nvidia,pins = "ap_ready_pv5"; + nvidia,function = "rsvd0"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + touch_rst_pv6 { + nvidia,pins = "touch_rst_pv6"; + nvidia,function = "rsvd0"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + touch_clk_pv7 { + nvidia,pins = "touch_clk_pv7"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + modem_wake_ap_px0 { + nvidia,pins = "modem_wake_ap_px0"; + nvidia,function = "rsvd0"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + touch_int_px1 { + nvidia,pins = "touch_int_px1"; + nvidia,function = "rsvd0"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + motion_int_px2 { + nvidia,pins = "motion_int_px2"; + nvidia,function = "rsvd0"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + als_prox_int_px3 { + nvidia,pins = "als_prox_int_px3"; + nvidia,function = "rsvd0"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + temp_alert_px4 { + nvidia,pins = "temp_alert_px4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + button_power_on_px5 { + nvidia,pins = "button_power_on_px5"; + nvidia,function = "rsvd0"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + button_vol_up_px6 { + nvidia,pins = "button_vol_up_px6"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + button_vol_down_px7 { + nvidia,pins = "button_vol_down_px7"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + button_slide_sw_py0 { + nvidia,pins = "button_slide_sw_py0"; + nvidia,function = "rsvd0"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + button_home_py1 { + nvidia,pins = "button_home_py1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + lcd_te_py2 { + nvidia,pins = "lcd_te_py2"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pwr_i2c_scl_py3 { + nvidia,pins = "pwr_i2c_scl_py3"; + nvidia,function = "i2cpmu"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,io-hv = <TEGRA_PIN_DISABLE>; + }; + pwr_i2c_sda_py4 { + nvidia,pins = "pwr_i2c_sda_py4"; + nvidia,function = "i2cpmu"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,io-hv = <TEGRA_PIN_DISABLE>; + }; + clk_32k_out_py5 { + nvidia,pins = "clk_32k_out_py5"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pz0 { + nvidia,pins = "pz0"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pz1 { + nvidia,pins = "pz1"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pz2 { + nvidia,pins = "pz2"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pz3 { + nvidia,pins = "pz3"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pz4 { + nvidia,pins = "pz4"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pz5 { + nvidia,pins = "pz5"; + nvidia,function = "soc"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + dap2_fs_paa0 { + nvidia,pins = "dap2_fs_paa0"; + nvidia,function = "i2s2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + dap2_sclk_paa1 { + nvidia,pins = "dap2_sclk_paa1"; + nvidia,function = "i2s2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + dap2_din_paa2 { + nvidia,pins = "dap2_din_paa2"; + nvidia,function = "i2s2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + dap2_dout_paa3 { + nvidia,pins = "dap2_dout_paa3"; + nvidia,function = "i2s2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + aud_mclk_pbb0 { + nvidia,pins = "aud_mclk_pbb0"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + dvfs_pwm_pbb1 { + nvidia,pins = "dvfs_pwm_pbb1"; + nvidia,function = "cldvfs"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + dvfs_clk_pbb2 { + nvidia,pins = "dvfs_clk_pbb2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + gpio_x1_aud_pbb3 { + nvidia,pins = "gpio_x1_aud_pbb3"; + nvidia,function = "rsvd0"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + gpio_x3_aud_pbb4 { + nvidia,pins = "gpio_x3_aud_pbb4"; + nvidia,function = "rsvd0"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + hdmi_cec_pcc0 { + nvidia,pins = "hdmi_cec_pcc0"; + nvidia,function = "cec"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,io-hv = <TEGRA_PIN_ENABLE>; + }; + hdmi_int_dp_hpd_pcc1 { + nvidia,pins = "hdmi_int_dp_hpd_pcc1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,io-hv = <TEGRA_PIN_DISABLE>; + }; + spdif_out_pcc2 { + nvidia,pins = "spdif_out_pcc2"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + spdif_in_pcc3 { + nvidia,pins = "spdif_in_pcc3"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + usb_vbus_en0_pcc4 { + nvidia,pins = "usb_vbus_en0_pcc4"; + nvidia,function = "usb"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,io-hv = <TEGRA_PIN_ENABLE>; + }; + usb_vbus_en1_pcc5 { + nvidia,pins = "usb_vbus_en1_pcc5"; + nvidia,function = "usb"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,io-hv = <TEGRA_PIN_ENABLE>; + }; + dp_hpd0_pcc6 { + nvidia,pins = "dp_hpd0_pcc6"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pcc7 { + nvidia,pins = "pcc7"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,io-hv = <TEGRA_PIN_DISABLE>; + }; + spi2_cs1_pdd0 { + nvidia,pins = "spi2_cs1_pdd0"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + qspi_sck_pee0 { + nvidia,pins = "qspi_sck_pee0"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + qspi_cs_n_pee1 { + nvidia,pins = "qspi_cs_n_pee1"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + qspi_io0_pee2 { + nvidia,pins = "qspi_io0_pee2"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + qspi_io1_pee3 { + nvidia,pins = "qspi_io1_pee3"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + qspi_io2_pee4 { + nvidia,pins = "qspi_io2_pee4"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + qspi_io3_pee5 { + nvidia,pins = "qspi_io3_pee5"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + core_pwr_req { + nvidia,pins = "core_pwr_req"; + nvidia,function = "core"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + cpu_pwr_req { + nvidia,pins = "cpu_pwr_req"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pwr_int_n { + nvidia,pins = "pwr_int_n"; + nvidia,function = "pmi"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + clk_32k_in { + nvidia,pins = "clk_32k_in"; + nvidia,function = "clk"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + jtag_rtck { + nvidia,pins = "jtag_rtck"; + nvidia,function = "jtag"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + clk_req { + nvidia,pins = "clk_req"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + shutdown { + nvidia,pins = "shutdown"; + nvidia,function = "shutdown"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + }; + }; + + serial@70006000 { + status = "okay"; + }; + + i2c@7000d000 { + status = "okay"; + clock-frequency = <400000>; + + max77620: max77620@3c { + compatible = "maxim,max77620"; + reg = <0x3c>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + + #interrupt-cells = <2>; + interrupt-controller; + + gpio-controller; + #gpio-cells = <2>; + + pinctrl-names = "default"; + pinctrl-0 = <&max77620_default>; + + max77620_default: pinmux@0 { + pin_gpio0 { + pins = "gpio0"; + function = "gpio"; + }; + + pin_gpio1 { + pins = "gpio1"; + function = "fps-out"; + drive-push-pull = <1>; + maxim,active-fps-source = <MAX77620_FPS_SRC_0>; + maxim,active-fps-power-up-slot = <7>; + maxim,active-fps-power-down-slot = <0>; + }; + + pin_gpio2_3 { + pins = "gpio2", "gpio3"; + function = "fps-out"; + drive-open-drain = <1>; + maxim,active-fps-source = <MAX77620_FPS_SRC_0>; + }; + + pin_gpio4 { + pins = "gpio4"; + function = "32k-out1"; + }; + + pin_gpio5_6_7 { + pins = "gpio5", "gpio6", "gpio7"; + function = "gpio"; + drive-push-pull = <1>; + }; + + pin_gpio2 { + maxim,active-fps-source = <MAX77620_FPS_SRC_0>; + }; + + pin_gpio3 { + maxim,active-fps-source = <MAX77620_FPS_SRC_0>; + }; + }; + + spmic-default-output-high { + gpio-hog; + output-high; + gpios = <2 GPIO_ACTIVE_HIGH 7 GPIO_ACTIVE_HIGH>; + }; + + fps { + #address-cells = <1>; + #size-cells = <0>; + + fps0 { + reg = <0>; + maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>; + }; + + fps1 { + reg = <1>; + maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN1>; + maxim,device-state-on-disabled-event = <MAX77620_FPS_INACTIVE_STATE_SLEEP>; + }; + + fps2 { + reg = <2>; + maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>; + }; + }; + + regulators { + in-ldo0-1-supply = <&max77620_sd2>; + in-ldo7-8-supply = <&max77620_sd2>; + + max77620_sd0: sd0 { + regulator-name = "vdd-core"; + regulator-enable-ramp-delay = <146>; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1400000>; + regulator-ramp-delay = <27500>; + regulator-always-on; + regulator-boot-on; + + maxim,active-fps-power-up-slot = <0>; + maxim,active-fps-source = <MAX77620_FPS_SRC_1>; + }; + + max77620_sd1: sd1 { + regulator-name = "vddio-ddr"; + regulator-enable-ramp-delay = <130>; + regulator-ramp-delay = <27500>; + regulator-always-on; + regulator-boot-on; + + maxim,active-fps-source = <MAX77620_FPS_SRC_0>; + }; + + max77620_sd2: sd2 { + regulator-name = "vdd-pre-reg"; + regulator-enable-ramp-delay = <176>; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-ramp-delay = <27500>; + regulator-always-on; + regulator-boot-on; + + maxim,active-fps-source = <MAX77620_FPS_SRC_1>; + maxim,suspend-fps-source = <MAX77620_FPS_SRC_NONE>; + }; + + max77620_sd3: sd3 { + regulator-name = "vdd-1v8"; + regulator-enable-ramp-delay = <242>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-ramp-delay = <27500>; + regulator-always-on; + regulator-boot-on; + + maxim,active-fps-source = <MAX77620_FPS_SRC_0>; + }; + + max77620_ldo0: ldo0 { + regulator-name = "avdd-sys"; + regulator-enable-ramp-delay = <26>; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-ramp-delay = <100000>; + regulator-boot-on; + + maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>; + }; + + max77620_ldo1: ldo1 { + regulator-name = "vdd-pex"; + regulator-enable-ramp-delay = <22>; + regulator-min-microvolt = <1075000>; + regulator-max-microvolt = <1075000>; + regulator-ramp-delay = <100000>; + regulator-always-on; + + maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>; + }; + + max77620_ldo2: ldo2 { + regulator-name = "vddio-sdmmc3"; + regulator-enable-ramp-delay = <62>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <100000>; + + maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>; + }; + + max77620_ldo3: ldo3 { + regulator-name = "vdd-3v3-eth"; + regulator-enable-ramp-delay = <50>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <100000>; + regulator-always-on; + regulator-boot-on; + + maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>; + }; + + max77620_ldo4: ldo4 { + regulator-name = "vdd-rtc"; + regulator-enable-ramp-delay = <22>; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-ramp-delay = <100000>; + regulator-always-on; + regulator-boot-on; + + maxim,active-fps-source = <MAX77620_FPS_SRC_0>; + }; + + max77620_ldo5: ldo5 { + regulator-name = "avdd-ts-hv"; + regulator-enable-ramp-delay = <62>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <100000>; + + maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>; + }; + + max77620_ldo6: ldo6 { + regulator-name = "vdd-ts"; + regulator-enable-ramp-delay = <36>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-ramp-delay = <100000>; + regulator-boot-on; + + maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>; + }; + + max77620_ldo7: ldo7 { + regulator-name = "vdd-gen-pll-edp"; + regulator-enable-ramp-delay = <24>; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + regulator-ramp-delay = <100000>; + regulator-always-on; + regulator-boot-on; + + maxim,active-fps-source = <MAX77620_FPS_SRC_1>; + maxim,suspend-fps-source = <MAX77620_FPS_SRC_NONE>; + }; + + max77620_ldo8: ldo8 { + regulator-name = "vdd-hdmi-dp"; + regulator-enable-ramp-delay = <22>; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + regulator-ramp-delay = <100000>; + regulator-always-on; + regulator-boot-on; + + maxim,active-fps-source = <MAX77620_FPS_SRC_1>; + }; + }; + }; + }; + + pmc@7000e400 { + nvidia,invert-interrupt; + nvidia,suspend-mode = <0>; + nvidia,cpu-pwr-good-time = <0>; + nvidia,cpu-pwr-off-time = <0>; + nvidia,core-pwr-good-time = <4587 3876>; + nvidia,core-pwr-off-time = <39065>; + nvidia,core-power-req-active-high; + nvidia,sys-clock-req-active-high; + status = "okay"; + }; + + sdhci@700b0600 { + bus-width = <8>; + non-removable; + status = "okay"; + }; + + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + clk32k_in: clock@0 { + compatible = "fixed-clock"; + reg = <0>; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + status = "okay"; + + power { + debounce-interval = <30>; + gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_LOW>; + label = "Power"; + linux,code = <KEY_POWER>; + wakeup-event-action = <EV_ACT_ASSERTED>; + wakeup-source; + }; + }; + + cpus { + cpu@0 { + enable-method = "psci"; + }; + + cpu@1 { + enable-method = "psci"; + }; + + cpu@2 { + enable-method = "psci"; + }; + + cpu@3 { + enable-method = "psci"; + }; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + regulators { + compatible = "simple-bus"; + device_type = "fixed-regulators"; + #address-cells = <1>; + #size-cells = <0>; + + battery_reg: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "vdd-ac-bat"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + vdd_3v3: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "vdd-3v3"; + regulator-enable-ramp-delay = <160>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + + gpio = <&max77620 3 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + max77620_gpio7: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "max77620-gpio7"; + regulator-enable-ramp-delay = <240>; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + vin-supply = <&max77620_ldo0>; + regulator-always-on; + regulator-boot-on; + + gpio = <&max77620 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + lcd_bl_en: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "lcd-bl-en"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + + gpio = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + en_vdd_sd: regulator@4 { + compatible = "regulator-fixed"; + reg = <4>; + regulator-name = "en-vdd-sd"; + regulator-enable-ramp-delay = <472>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vdd_3v3>; + + gpio = <&gpio TEGRA_GPIO(Z, 4) GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + en_vdd_cam: regulator@5 { + compatible = "regulator-fixed"; + reg = <5>; + regulator-name = "en-vdd-cam"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&gpio TEGRA_GPIO(S, 4) GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vdd_sys_boost: regulator@6 { + compatible = "regulator-fixed"; + reg = <6>; + regulator-name = "vdd-sys-boost"; + regulator-enable-ramp-delay = <3090>; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + + gpio = <&max77620 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vdd_hdmi: regulator@7 { + compatible = "regulator-fixed"; + reg = <7>; + regulator-name = "vdd-hdmi"; + regulator-enable-ramp-delay = <468>; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vdd_sys_boost>; + regulator-boot-on; + + gpio = <&gpio TEGRA_GPIO(CC, 7) GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + en_vdd_cpu_fixed: regulator@8 { + compatible = "regulator-fixed"; + reg = <8>; + regulator-name = "vdd-cpu-fixed"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + vdd_aux_3v3: regulator@9 { + compatible = "regulator-fixed"; + reg = <9>; + regulator-name = "aux-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vdd_snsr_pm: regulator@10 { + compatible = "regulator-fixed"; + reg = <10>; + regulator-name = "snsr_pm"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + enable-active-high; + }; + + vdd_usb_5v0: regulator@11 { + compatible = "regulator-fixed"; + reg = <11>; + status = "disabled"; + regulator-name = "vdd-usb-5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vdd_3v3>; + + enable-active-high; + }; + + vdd_cdc_1v2_aud: regulator@101 { + compatible = "regulator-fixed"; + reg = <101>; + status = "disabled"; + regulator-name = "vdd_cdc_1v2_aud"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + startup-delay-us = <250000>; + + enable-active-high; + }; + + vdd_disp_3v0: regulator@12 { + compatible = "regulator-fixed"; + reg = <12>; + regulator-name = "vdd-disp-3v0"; + regulator-enable-ramp-delay = <232>; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + + gpio = <&gpio TEGRA_GPIO(I, 3) GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vdd_fan: regulator@13 { + compatible = "regulator-fixed"; + reg = <13>; + regulator-name = "vdd-fan"; + regulator-enable-ramp-delay = <284>; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + gpio = <&gpio TEGRA_GPIO(E, 4) GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + usb_vbus1: regulator@14 { + compatible = "regulator-fixed"; + reg = <14>; + regulator-name = "usb-vbus1"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + gpio = <&gpio TEGRA_GPIO(CC, 5) GPIO_ACTIVE_HIGH>; + enable-active-high; + gpio-open-drain; + }; + + usb_vbus2: regulator@15 { + compatible = "regulator-fixed"; + reg = <15>; + regulator-name = "usb-vbus2"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + gpio = <&gpio TEGRA_GPIO(CC, 4) GPIO_ACTIVE_HIGH>; + enable-active-high; + gpio-open-drain; + }; + + vdd_3v3_eth: regulator@16 { + compatible = "regulator-fixed"; + reg = <16>; + regulator-name = "vdd-3v3-eth-a02"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + + gpio = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_HIGH>; + enable-active-high; + gpio-open-drain; + }; + }; +}; diff --git a/dts/src/arm64/nvidia/tegra210-smaug.dts b/dts/src/arm64/nvidia/tegra210-smaug.dts index 43cae47988..a4b8f668a6 100644 --- a/dts/src/arm64/nvidia/tegra210-smaug.dts +++ b/dts/src/arm64/nvidia/tegra210-smaug.dts @@ -1340,10 +1340,29 @@ status = "okay"; clock-frequency = <1000000>; + max77621_cpu: max77621@1b { + compatible = "maxim,max77621"; + reg = <0x1b>; + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(Y, 1) IRQ_TYPE_LEVEL_LOW>; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1231250>; + regulator-name = "PPVAR_CPU"; + regulator-ramp-delay = <12500>; + maxim,dvs-default-state = <1>; + maxim,enable-active-discharge; + maxim,enable-bias-control; + maxim,enable-etr; + maxim,enable-gpio = <&max77620 5 0>; + maxim,externally-enable; + }; + max77620: max77620@3c { compatible = "maxim,max77620"; reg = <0x3c>; - interrupts = <0 86 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; #interrupt-cells = <2>; interrupt-controller; @@ -1679,6 +1698,18 @@ status = "okay"; }; + clock@70110000 { + status = "okay"; + nvidia,cf = <6>; + nvidia,ci = <0>; + nvidia,cg = <2>; + nvidia,droop-ctrl = <0x00000f00>; + nvidia,force-mode = <1>; + nvidia,i2c-fs-rate = <400000>; + nvidia,sample-rate = <12500>; + vdd-cpu-supply = <&max77621_cpu>; + }; + aconnect@702c0000 { status = "okay"; @@ -1724,7 +1755,6 @@ gpio-keys { compatible = "gpio-keys"; - gpio-keys,name = "gpio-keys"; power { label = "Power"; diff --git a/dts/src/arm64/nvidia/tegra210.dtsi b/dts/src/arm64/nvidia/tegra210.dtsi index 2205d66b04..6574396d22 100644 --- a/dts/src/arm64/nvidia/tegra210.dtsi +++ b/dts/src/arm64/nvidia/tegra210.dtsi @@ -4,6 +4,7 @@ #include <dt-bindings/memory/tegra210-mc.h> #include <dt-bindings/pinctrl/pinctrl-tegra.h> #include <dt-bindings/pinctrl/pinctrl-tegra-io-pad.h> +#include <dt-bindings/reset/tegra210-car.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/thermal/tegra124-soctherm.h> @@ -469,13 +470,55 @@ apbmisc@70000800 { compatible = "nvidia,tegra210-apbmisc", "nvidia,tegra20-apbmisc"; reg = <0x0 0x70000800 0x0 0x64>, /* Chip revision */ - <0x0 0x7000e864 0x0 0x04>; /* Strapping options */ + <0x0 0x70000008 0x0 0x04>; /* Strapping options */ }; pinmux: pinmux@700008d4 { compatible = "nvidia,tegra210-pinmux"; reg = <0x0 0x700008d4 0x0 0x29c>, /* Pad control registers */ <0x0 0x70003000 0x0 0x294>; /* Mux registers */ + sdmmc1_3v3_drv: sdmmc1-3v3-drv { + sdmmc1 { + nvidia,pins = "drive_sdmmc1"; + nvidia,pull-down-strength = <0x8>; + nvidia,pull-up-strength = <0x8>; + }; + }; + sdmmc1_1v8_drv: sdmmc1-1v8-drv { + sdmmc1 { + nvidia,pins = "drive_sdmmc1"; + nvidia,pull-down-strength = <0x4>; + nvidia,pull-up-strength = <0x3>; + }; + }; + sdmmc2_1v8_drv: sdmmc2-1v8-drv { + sdmmc2 { + nvidia,pins = "drive_sdmmc2"; + nvidia,pull-down-strength = <0x10>; + nvidia,pull-up-strength = <0x10>; + }; + }; + sdmmc3_3v3_drv: sdmmc3-3v3-drv { + sdmmc3 { + nvidia,pins = "drive_sdmmc3"; + nvidia,pull-down-strength = <0x8>; + nvidia,pull-up-strength = <0x8>; + }; + }; + sdmmc3_1v8_drv: sdmmc3-1v8-drv { + sdmmc3 { + nvidia,pins = "drive_sdmmc3"; + nvidia,pull-down-strength = <0x4>; + nvidia,pull-up-strength = <0x3>; + }; + }; + sdmmc4_1v8_drv: sdmmc4-1v8-drv { + sdmmc4 { + nvidia,pins = "drive_sdmmc4"; + nvidia,pull-down-strength = <0x10>; + nvidia,pull-up-strength = <0x10>; + }; + }; }; /* @@ -554,7 +597,7 @@ }; i2c@7000c000 { - compatible = "nvidia,tegra210-i2c", "nvidia,tegra114-i2c"; + compatible = "nvidia,tegra210-i2c", "nvidia,tegra124-i2c"; reg = <0x0 0x7000c000 0x0 0x100>; interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -569,7 +612,7 @@ }; i2c@7000c400 { - compatible = "nvidia,tegra210-i2c", "nvidia,tegra114-i2c"; + compatible = "nvidia,tegra210-i2c", "nvidia,tegra124-i2c"; reg = <0x0 0x7000c400 0x0 0x100>; interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -584,7 +627,7 @@ }; i2c@7000c500 { - compatible = "nvidia,tegra210-i2c", "nvidia,tegra114-i2c"; + compatible = "nvidia,tegra210-i2c", "nvidia,tegra124-i2c"; reg = <0x0 0x7000c500 0x0 0x100>; interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -599,7 +642,7 @@ }; i2c@7000c700 { - compatible = "nvidia,tegra210-i2c", "nvidia,tegra114-i2c"; + compatible = "nvidia,tegra210-i2c", "nvidia,tegra124-i2c"; reg = <0x0 0x7000c700 0x0 0x100>; interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -617,7 +660,7 @@ }; i2c@7000d000 { - compatible = "nvidia,tegra210-i2c", "nvidia,tegra114-i2c"; + compatible = "nvidia,tegra210-i2c", "nvidia,tegra124-i2c"; reg = <0x0 0x7000d000 0x0 0x100>; interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -632,7 +675,7 @@ }; i2c@7000d100 { - compatible = "nvidia,tegra210-i2c", "nvidia,tegra114-i2c"; + compatible = "nvidia,tegra210-i2c", "nvidia,tegra124-i2c"; reg = <0x0 0x7000d100 0x0 0x100>; interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -1050,9 +1093,12 @@ clock-names = "sdhci"; resets = <&tegra_car 14>; reset-names = "sdhci"; - pinctrl-names = "sdmmc-3v3", "sdmmc-1v8"; + pinctrl-names = "sdmmc-3v3", "sdmmc-1v8", + "sdmmc-3v3-drv", "sdmmc-1v8-drv"; pinctrl-0 = <&sdmmc1_3v3>; pinctrl-1 = <&sdmmc1_1v8>; + pinctrl-2 = <&sdmmc1_3v3_drv>; + pinctrl-3 = <&sdmmc1_1v8_drv>; nvidia,pad-autocal-pull-up-offset-3v3 = <0x00>; nvidia,pad-autocal-pull-down-offset-3v3 = <0x7d>; nvidia,pad-autocal-pull-up-offset-1v8 = <0x7b>; @@ -1075,6 +1121,8 @@ clock-names = "sdhci"; resets = <&tegra_car 9>; reset-names = "sdhci"; + pinctrl-names = "sdmmc-1v8-drv"; + pinctrl-0 = <&sdmmc2_1v8_drv>; nvidia,pad-autocal-pull-up-offset-1v8 = <0x05>; nvidia,pad-autocal-pull-down-offset-1v8 = <0x05>; nvidia,default-tap = <0x8>; @@ -1090,9 +1138,12 @@ clock-names = "sdhci"; resets = <&tegra_car 69>; reset-names = "sdhci"; - pinctrl-names = "sdmmc-3v3", "sdmmc-1v8"; + pinctrl-names = "sdmmc-3v3", "sdmmc-1v8", + "sdmmc-3v3-drv", "sdmmc-1v8-drv"; pinctrl-0 = <&sdmmc3_3v3>; pinctrl-1 = <&sdmmc3_1v8>; + pinctrl-2 = <&sdmmc3_3v3_drv>; + pinctrl-3 = <&sdmmc3_1v8_drv>; nvidia,pad-autocal-pull-up-offset-3v3 = <0x00>; nvidia,pad-autocal-pull-down-offset-3v3 = <0x7d>; nvidia,pad-autocal-pull-up-offset-1v8 = <0x7b>; @@ -1110,6 +1161,9 @@ clock-names = "sdhci"; resets = <&tegra_car 15>; reset-names = "sdhci"; + pinctrl-names = "sdmmc-3v3-drv", "sdmmc-1v8-drv"; + pinctrl-0 = <&sdmmc4_1v8_drv>; + pinctrl-1 = <&sdmmc4_1v8_drv>; nvidia,pad-autocal-pull-up-offset-1v8 = <0x05>; nvidia,pad-autocal-pull-down-offset-1v8 = <0x05>; nvidia,default-tap = <0x8>; @@ -1131,6 +1185,24 @@ #nvidia,mipi-calibrate-cells = <1>; }; + dfll: clock@70110000 { + compatible = "nvidia,tegra210-dfll"; + reg = <0 0x70110000 0 0x100>, /* DFLL control */ + <0 0x70110000 0 0x100>, /* I2C output control */ + <0 0x70110100 0 0x100>, /* Integrated I2C controller */ + <0 0x70110200 0 0x100>; /* Look-up table RAM */ + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA210_CLK_DFLL_SOC>, + <&tegra_car TEGRA210_CLK_DFLL_REF>, + <&tegra_car TEGRA210_CLK_I2C5>; + clock-names = "soc", "ref", "i2c"; + resets = <&tegra_car TEGRA210_RST_DFLL_DVCO>; + reset-names = "dvco"; + #clock-cells = <0>; + clock-output-names = "dfllCPU_out"; + status = "disabled"; + }; + aconnect@702c0000 { compatible = "nvidia,tegra210-aconnect"; clocks = <&tegra_car TEGRA210_CLK_APE>, @@ -1285,6 +1357,12 @@ device_type = "cpu"; compatible = "arm,cortex-a57"; reg = <0>; + clocks = <&tegra_car TEGRA210_CLK_CCLK_G>, + <&tegra_car TEGRA210_CLK_PLL_X>, + <&tegra_car TEGRA210_CLK_PLL_P_OUT4>, + <&dfll>; + clock-names = "cpu_g", "pll_x", "pll_p", "dfll"; + clock-latency = <300000>; }; cpu@1 { diff --git a/dts/src/arm64/qcom/apq8016-sbc.dtsi b/dts/src/arm64/qcom/apq8016-sbc.dtsi index 46feedf7c9..134617d87a 100644 --- a/dts/src/arm64/qcom/apq8016-sbc.dtsi +++ b/dts/src/arm64/qcom/apq8016-sbc.dtsi @@ -644,6 +644,8 @@ l11 { regulator-min-microvolt = <1750000>; regulator-max-microvolt = <3337000>; + regulator-allow-set-load; + regulator-system-load = <200000>; }; l12 { diff --git a/dts/src/arm64/qcom/ipq8074.dtsi b/dts/src/arm64/qcom/ipq8074.dtsi index 18226980f7..aea1dbc3f5 100644 --- a/dts/src/arm64/qcom/ipq8074.dtsi +++ b/dts/src/arm64/qcom/ipq8074.dtsi @@ -441,7 +441,7 @@ CPU0: cpu@0 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0>; next-level-cache = <&L2_0>; enable-method = "psci"; @@ -449,7 +449,7 @@ CPU1: cpu@1 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; enable-method = "psci"; reg = <0x1>; next-level-cache = <&L2_0>; @@ -457,7 +457,7 @@ CPU2: cpu@2 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; enable-method = "psci"; reg = <0x2>; next-level-cache = <&L2_0>; @@ -465,7 +465,7 @@ CPU3: cpu@3 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; enable-method = "psci"; reg = <0x3>; next-level-cache = <&L2_0>; diff --git a/dts/src/arm64/qcom/msm8916.dtsi b/dts/src/arm64/qcom/msm8916.dtsi index c5348c3da5..0803ca8c02 100644 --- a/dts/src/arm64/qcom/msm8916.dtsi +++ b/dts/src/arm64/qcom/msm8916.dtsi @@ -106,48 +106,48 @@ CPU0: cpu@0 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0>; next-level-cache = <&L2_0>; enable-method = "psci"; cpu-idle-states = <&CPU_SPC>; - clocks = <&apcs 0>; + clocks = <&apcs>; operating-points-v2 = <&cpu_opp_table>; #cooling-cells = <2>; }; CPU1: cpu@1 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x1>; next-level-cache = <&L2_0>; enable-method = "psci"; cpu-idle-states = <&CPU_SPC>; - clocks = <&apcs 0>; + clocks = <&apcs>; operating-points-v2 = <&cpu_opp_table>; #cooling-cells = <2>; }; CPU2: cpu@2 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x2>; next-level-cache = <&L2_0>; enable-method = "psci"; cpu-idle-states = <&CPU_SPC>; - clocks = <&apcs 0>; + clocks = <&apcs>; operating-points-v2 = <&cpu_opp_table>; #cooling-cells = <2>; }; CPU3: cpu@3 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x3>; next-level-cache = <&L2_0>; enable-method = "psci"; cpu-idle-states = <&CPU_SPC>; - clocks = <&apcs 0>; + clocks = <&apcs>; operating-points-v2 = <&cpu_opp_table>; #cooling-cells = <2>; }; diff --git a/dts/src/arm64/qcom/msm8992.dtsi b/dts/src/arm64/qcom/msm8992.dtsi index cf5cacdd62..50cefb822d 100644 --- a/dts/src/arm64/qcom/msm8992.dtsi +++ b/dts/src/arm64/qcom/msm8992.dtsi @@ -38,7 +38,7 @@ CPU0: cpu@0 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x0>; next-level-cache = <&L2_0>; L2_0: l2-cache { diff --git a/dts/src/arm64/qcom/msm8994.dtsi b/dts/src/arm64/qcom/msm8994.dtsi index f33c41d01c..6a4049aae0 100644 --- a/dts/src/arm64/qcom/msm8994.dtsi +++ b/dts/src/arm64/qcom/msm8994.dtsi @@ -40,7 +40,7 @@ CPU0: cpu@0 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0>; next-level-cache = <&L2_0>; L2_0: l2-cache { diff --git a/dts/src/arm64/qcom/msm8996-pins.dtsi b/dts/src/arm64/qcom/msm8996-pins.dtsi index 8d5114d16d..131878db98 100644 --- a/dts/src/arm64/qcom/msm8996-pins.dtsi +++ b/dts/src/arm64/qcom/msm8996-pins.dtsi @@ -139,7 +139,7 @@ }; pinconf { - pins = "gpio4", "gpiio5", "gpio6", "gpio7"; + pins = "gpio4", "gpio5", "gpio6", "gpio7"; drive-strength = <2>; bias-disable; }; diff --git a/dts/src/arm64/qcom/msm8996.dtsi b/dts/src/arm64/qcom/msm8996.dtsi index 838e32cc14..c761269caf 100644 --- a/dts/src/arm64/qcom/msm8996.dtsi +++ b/dts/src/arm64/qcom/msm8996.dtsi @@ -306,6 +306,40 @@ #clock-cells = <1>; }; + rpmpd: power-controller { + compatible = "qcom,msm8996-rpmpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmpd_opp_table>; + + rpmpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmpd_opp1: opp1 { + opp-level = <1>; + }; + + rpmpd_opp2: opp2 { + opp-level = <2>; + }; + + rpmpd_opp3: opp3 { + opp-level = <3>; + }; + + rpmpd_opp4: opp4 { + opp-level = <4>; + }; + + rpmpd_opp5: opp5 { + opp-level = <5>; + }; + + rpmpd_opp6: opp6 { + opp-level = <6>; + }; + }; + }; + pm8994-regulators { compatible = "qcom,rpm-pm8994-regulators"; @@ -966,7 +1000,7 @@ clock-names = "iface", "bus"; #iommu-cells = <1>; - status = "ok"; + status = "disabled"; }; camss: camss@a00000 { diff --git a/dts/src/arm64/qcom/msm8998-mtp.dtsi b/dts/src/arm64/qcom/msm8998-mtp.dtsi index 50e9033aa7..f0901067b0 100644 --- a/dts/src/arm64/qcom/msm8998-mtp.dtsi +++ b/dts/src/arm64/qcom/msm8998-mtp.dtsi @@ -65,6 +65,13 @@ status = "okay"; }; +&qusb2phy { + status = "okay"; + + vdda-pll-supply = <&vreg_l12a_1p8>; + vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; +}; + &rpm_requests { pm8998-regulators { compatible = "qcom,rpm-pm8998-regulators"; @@ -192,6 +199,8 @@ vreg_l21a_2p95: l21 { regulator-min-microvolt = <2960000>; regulator-max-microvolt = <2960000>; + regulator-allow-set-load; + regulator-system-load = <800000>; }; vreg_l22a_2p85: l22 { regulator-min-microvolt = <2864000>; @@ -257,3 +266,18 @@ pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; }; + +&usb3 { + status = "okay"; +}; + +&usb3_dwc3 { + dr_mode = "host"; /* Force to host until we have Type-C hooked up */ +}; + +&usb3phy { + status = "okay"; + + vdda-phy-supply = <&vreg_l1a_0p875>; + vdda-pll-supply = <&vreg_l2a_1p2>; +}; diff --git a/dts/src/arm64/qcom/msm8998.dtsi b/dts/src/arm64/qcom/msm8998.dtsi index 99bccaac31..3fd0769fe6 100644 --- a/dts/src/arm64/qcom/msm8998.dtsi +++ b/dts/src/arm64/qcom/msm8998.dtsi @@ -3,6 +3,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,gcc-msm8998.h> +#include <dt-bindings/clock/qcom,rpmcc.h> #include <dt-bindings/gpio/gpio.h> / { @@ -266,6 +267,11 @@ rpm_requests: rpm-requests { compatible = "qcom,rpm-msm8998"; qcom,glink-channels = "rpm_requests"; + + rpmcc: clock-controller { + compatible = "qcom,rpmcc-msm8998", "qcom,rpmcc"; + #clock-cells = <1>; + }; }; }; @@ -540,6 +546,11 @@ reg = <0x780000 0x621c>; #address-cells = <1>; #size-cells = <1>; + + qusb2_hstx_trim: hstx-trim@423a { + reg = <0x423a 0x1>; + bits = <0 4>; + }; }; gcc: clock-controller@100000 { @@ -607,6 +618,93 @@ #mbox-cells = <1>; }; + usb3: usb@a8f8800 { + compatible = "qcom,msm8998-dwc3", "qcom,dwc3"; + reg = <0x0a8f8800 0x400>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clocks = <&gcc GCC_CFG_NOC_USB3_AXI_CLK>, + <&gcc GCC_USB30_MASTER_CLK>, + <&gcc GCC_AGGRE1_USB3_AXI_CLK>, + <&gcc GCC_USB30_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_SLEEP_CLK>; + clock-names = "cfg_noc", "core", "iface", "mock_utmi", + "sleep"; + + assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_MASTER_CLK>; + assigned-clock-rates = <19200000>, <120000000>; + + interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hs_phy_irq", "ss_phy_irq"; + + power-domains = <&gcc USB_30_GDSC>; + + resets = <&gcc GCC_USB_30_BCR>; + + usb3_dwc3: dwc3@a800000 { + compatible = "snps,dwc3"; + reg = <0x0a800000 0xcd00>; + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + phys = <&qusb2phy>, <&usb1_ssphy>; + phy-names = "usb2-phy", "usb3-phy"; + snps,has-lpm-erratum; + snps,hird-threshold = /bits/ 8 <0x10>; + }; + }; + + usb3phy: phy@c010000 { + compatible = "qcom,msm8998-qmp-usb3-phy"; + reg = <0x0c010000 0x18c>; + status = "disabled"; + #clock-cells = <1>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clocks = <&gcc GCC_USB3_PHY_AUX_CLK>, + <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, + <&gcc GCC_USB3_CLKREF_CLK>; + clock-names = "aux", "cfg_ahb", "ref"; + + resets = <&gcc GCC_USB3_PHY_BCR>, + <&gcc GCC_USB3PHY_PHY_BCR>; + reset-names = "phy", "common"; + + usb1_ssphy: lane@c010200 { + reg = <0xc010200 0x128>, + <0xc010400 0x200>, + <0xc010c00 0x20c>, + <0xc010600 0x128>, + <0xc010800 0x200>; + #phy-cells = <0>; + clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "usb3_phy_pipe_clk_src"; + }; + }; + + qusb2phy: phy@c012000 { + compatible = "qcom,msm8998-qusb2-phy"; + reg = <0x0c012000 0x2a8>; + status = "disabled"; + #phy-cells = <0>; + + clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, + <&gcc GCC_RX1_USB2_CLKREF_CLK>; + clock-names = "cfg_ahb", "ref"; + + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + + nvmem-cells = <&qusb2_hstx_trim>; + }; + sdhc2: sdhci@c0a4900 { compatible = "qcom,sdhci-msm-v4"; reg = <0xc0a4900 0x314>, <0xc0a4000 0x800>; @@ -624,6 +722,186 @@ status = "disabled"; }; + blsp1_i2c1: i2c@c175000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x0c175000 0x600>; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + clock-frequency = <400000>; + + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + blsp1_i2c2: i2c@c176000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x0c176000 0x600>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + clock-frequency = <400000>; + + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + blsp1_i2c3: i2c@c177000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x0c177000 0x600>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + clock-frequency = <400000>; + + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + blsp1_i2c4: i2c@c178000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x0c178000 0x600>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + clock-frequency = <400000>; + + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + blsp1_i2c5: i2c@c179000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x0c179000 0x600>; + interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + clock-frequency = <400000>; + + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + blsp1_i2c6: i2c@c17a000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x0c17a000 0x600>; + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + clock-frequency = <400000>; + + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + blsp2_i2c0: i2c@c1b5000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x0c1b5000 0x600>; + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + clock-frequency = <400000>; + + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + blsp2_i2c1: i2c@c1b6000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x0c1b6000 0x600>; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + clock-frequency = <400000>; + + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + blsp2_i2c2: i2c@c1b7000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x0c1b7000 0x600>; + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_BLSP2_QUP3_I2C_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + clock-frequency = <400000>; + + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + blsp2_i2c3: i2c@c1b8000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x0c1b8000 0x600>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_BLSP2_QUP4_I2C_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + clock-frequency = <400000>; + + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + blsp2_i2c4: i2c@c1b9000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x0c1b9000 0x600>; + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + clock-frequency = <400000>; + + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + blsp2_i2c5: i2c@c1ba000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x0c175000 0x600>; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_BLSP2_QUP6_I2C_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + clock-frequency = <400000>; + + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + blsp2_uart1: serial@c1b0000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0xc1b0000 0x1000>; diff --git a/dts/src/arm64/qcom/pm8005.dtsi b/dts/src/arm64/qcom/pm8005.dtsi index 4d5aca3eeb..c0ddf12813 100644 --- a/dts/src/arm64/qcom/pm8005.dtsi +++ b/dts/src/arm64/qcom/pm8005.dtsi @@ -16,10 +16,8 @@ reg = <0xc000>; gpio-controller; #gpio-cells = <2>; - interrupts = <0 0xc0 0 IRQ_TYPE_NONE>, - <0 0xc1 0 IRQ_TYPE_NONE>, - <0 0xc2 0 IRQ_TYPE_NONE>, - <0 0xc3 0 IRQ_TYPE_NONE>; + interrupt-controller; + #interrupt-cells = <2>; }; }; diff --git a/dts/src/arm64/qcom/pm8916.dtsi b/dts/src/arm64/qcom/pm8916.dtsi index 15a37cbcd2..9dd2df1cbf 100644 --- a/dts/src/arm64/qcom/pm8916.dtsi +++ b/dts/src/arm64/qcom/pm8916.dtsi @@ -32,6 +32,12 @@ bias-pull-up; linux,code = <KEY_POWER>; }; + + watchdog { + compatible = "qcom,pm8916-wdt"; + interrupts = <0x0 0x8 6 IRQ_TYPE_EDGE_RISING>; + timeout-sec = <60>; + }; }; pm8916_gpios: gpios@c000 { diff --git a/dts/src/arm64/qcom/pm8998.dtsi b/dts/src/arm64/qcom/pm8998.dtsi index f1025a50c2..43cb5ea140 100644 --- a/dts/src/arm64/qcom/pm8998.dtsi +++ b/dts/src/arm64/qcom/pm8998.dtsi @@ -94,32 +94,8 @@ reg = <0xc000>; gpio-controller; #gpio-cells = <2>; - interrupts = <0 0xc0 0 IRQ_TYPE_NONE>, - <0 0xc1 0 IRQ_TYPE_NONE>, - <0 0xc2 0 IRQ_TYPE_NONE>, - <0 0xc3 0 IRQ_TYPE_NONE>, - <0 0xc4 0 IRQ_TYPE_NONE>, - <0 0xc5 0 IRQ_TYPE_NONE>, - <0 0xc6 0 IRQ_TYPE_NONE>, - <0 0xc7 0 IRQ_TYPE_NONE>, - <0 0xc8 0 IRQ_TYPE_NONE>, - <0 0xc9 0 IRQ_TYPE_NONE>, - <0 0xca 0 IRQ_TYPE_NONE>, - <0 0xcb 0 IRQ_TYPE_NONE>, - <0 0xcc 0 IRQ_TYPE_NONE>, - <0 0xcd 0 IRQ_TYPE_NONE>, - <0 0xce 0 IRQ_TYPE_NONE>, - <0 0xcf 0 IRQ_TYPE_NONE>, - <0 0xd0 0 IRQ_TYPE_NONE>, - <0 0xd1 0 IRQ_TYPE_NONE>, - <0 0xd2 0 IRQ_TYPE_NONE>, - <0 0xd3 0 IRQ_TYPE_NONE>, - <0 0xd4 0 IRQ_TYPE_NONE>, - <0 0xd5 0 IRQ_TYPE_NONE>, - <0 0xd6 0 IRQ_TYPE_NONE>, - <0 0xd7 0 IRQ_TYPE_NONE>, - <0 0xd8 0 IRQ_TYPE_NONE>, - <0 0xd9 0 IRQ_TYPE_NONE>; + interrupt-controller; + #interrupt-cells = <2>; }; }; diff --git a/dts/src/arm64/qcom/pmi8994.dtsi b/dts/src/arm64/qcom/pmi8994.dtsi index dae1cdc23f..3aee10e3f9 100644 --- a/dts/src/arm64/qcom/pmi8994.dtsi +++ b/dts/src/arm64/qcom/pmi8994.dtsi @@ -15,16 +15,8 @@ reg = <0xc000>; gpio-controller; #gpio-cells = <2>; - interrupts = <2 0xc0 0 IRQ_TYPE_NONE>, - <2 0xc1 0 IRQ_TYPE_NONE>, - <2 0xc2 0 IRQ_TYPE_NONE>, - <2 0xc3 0 IRQ_TYPE_NONE>, - <2 0xc4 0 IRQ_TYPE_NONE>, - <2 0xc5 0 IRQ_TYPE_NONE>, - <2 0xc6 0 IRQ_TYPE_NONE>, - <2 0xc7 0 IRQ_TYPE_NONE>, - <2 0xc8 0 IRQ_TYPE_NONE>, - <2 0xc9 0 IRQ_TYPE_NONE>; + interrupt-controller; + #interrupt-cells = <2>; }; }; diff --git a/dts/src/arm64/qcom/pmi8998.dtsi b/dts/src/arm64/qcom/pmi8998.dtsi index da3285e216..051f57e7d6 100644 --- a/dts/src/arm64/qcom/pmi8998.dtsi +++ b/dts/src/arm64/qcom/pmi8998.dtsi @@ -14,20 +14,8 @@ reg = <0xc000>; gpio-controller; #gpio-cells = <2>; - interrupts = <0 0xc0 0 IRQ_TYPE_NONE>, - <0 0xc1 0 IRQ_TYPE_NONE>, - <0 0xc2 0 IRQ_TYPE_NONE>, - <0 0xc3 0 IRQ_TYPE_NONE>, - <0 0xc4 0 IRQ_TYPE_NONE>, - <0 0xc5 0 IRQ_TYPE_NONE>, - <0 0xc6 0 IRQ_TYPE_NONE>, - <0 0xc7 0 IRQ_TYPE_NONE>, - <0 0xc8 0 IRQ_TYPE_NONE>, - <0 0xc9 0 IRQ_TYPE_NONE>, - <0 0xca 0 IRQ_TYPE_NONE>, - <0 0xcb 0 IRQ_TYPE_NONE>, - <0 0xcc 0 IRQ_TYPE_NONE>, - <0 0xcd 0 IRQ_TYPE_NONE>; + interrupt-controller; + #interrupt-cells = <2>; }; }; diff --git a/dts/src/arm64/qcom/pms405.dtsi b/dts/src/arm64/qcom/pms405.dtsi index ad2b62dfc9..1bb836d1e8 100644 --- a/dts/src/arm64/qcom/pms405.dtsi +++ b/dts/src/arm64/qcom/pms405.dtsi @@ -3,6 +3,32 @@ #include <dt-bindings/spmi/spmi.h> #include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/iio/qcom,spmi-vadc.h> +#include <dt-bindings/thermal/thermal.h> + +/ { + thermal-zones { + pms405 { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&pms405_temp>; + + trips { + pms405_alert0: pms405-alert0 { + temperature = <105000>; + hysteresis = <2000>; + type = "passive"; + }; + pms405_crit: pms405-crit { + temperature = <125000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + }; +}; &spmi_bus { pms405_0: pms405@0 { @@ -45,6 +71,59 @@ }; }; + pms405_temp: temp-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400>; + interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>; + io-channels = <&pms405_adc ADC5_DIE_TEMP>; + io-channel-names = "thermal"; + #thermal-sensor-cells = <0>; + }; + + pms405_adc: adc@3100 { + compatible = "qcom,pms405-adc", "qcom,spmi-adc-rev2"; + reg = <0x3100>; + interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + + ref_gnd { + reg = <ADC5_REF_GND>; + qcom,pre-scaling = <1 1>; + }; + + vref_1p25 { + reg = <ADC5_1P25VREF>; + qcom,pre-scaling = <1 1>; + }; + + vph_pwr { + reg = <ADC5_VPH_PWR>; + qcom,pre-scaling = <1 3>; + }; + + die_temp { + reg = <ADC5_DIE_TEMP>; + qcom,pre-scaling = <1 1>; + }; + + xo_therm_100k_pu { + reg = <ADC5_XO_THERM_100K_PU>; + qcom,pre-scaling = <1 1>; + }; + + amux_thm1_100k_pu { + reg = <ADC5_AMUX_THM1_100K_PU>; + qcom,pre-scaling = <1 1>; + }; + + amux_thm3_100k_pu { + reg = <ADC5_AMUX_THM3_100K_PU>; + qcom,pre-scaling = <1 1>; + }; + }; + rtc@6000 { compatible = "qcom,pm8941-rtc"; reg = <0x6000>; diff --git a/dts/src/arm64/qcom/qcs404-evb.dtsi b/dts/src/arm64/qcom/qcs404-evb.dtsi index a39924efeb..50b3589c7f 100644 --- a/dts/src/arm64/qcom/qcs404-evb.dtsi +++ b/dts/src/arm64/qcom/qcs404-evb.dtsi @@ -127,6 +127,7 @@ status = "ok"; mmc-ddr-1_8v; + mmc-hs400-1_8v; bus-width = <8>; non-removable; @@ -186,3 +187,21 @@ }; }; }; + +&wifi { + status = "okay"; +}; + +/* PINCTRL - additions to nodes defined in qcs404.dtsi */ + +&blsp1_uart2_default { + rx { + drive-strength = <2>; + bias-disable; + }; + + tx { + drive-strength = <2>; + bias-disable; + }; +}; diff --git a/dts/src/arm64/qcom/qcs404.dtsi b/dts/src/arm64/qcom/qcs404.dtsi index 9b5c16562b..e8fd26633d 100644 --- a/dts/src/arm64/qcom/qcs404.dtsi +++ b/dts/src/arm64/qcom/qcs404.dtsi @@ -3,6 +3,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,gcc-qcs404.h> +#include <dt-bindings/clock/qcom,rpmcc.h> / { interrupt-parent = <&intc>; @@ -224,6 +225,11 @@ rpm_requests: glink-channel { compatible = "qcom,rpm-qcs404"; qcom,glink-channels = "rpm_requests"; + + rpmcc: clock-controller { + compatible = "qcom,rpmcc-qcs404"; + #clock-cells = <1>; + }; }; }; @@ -272,6 +278,105 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + + blsp1_i2c0_default: blsp1-i2c0-default { + pins = "gpio32", "gpio33"; + function = "blsp_i2c0"; + }; + + blsp1_i2c1_default: blsp1-i2c1-default { + pins = "gpio24", "gpio25"; + function = "blsp_i2c1"; + }; + + blsp1_i2c2_default: blsp1-i2c2-default { + sda { + pins = "gpio19"; + function = "blsp_i2c_sda_a2"; + }; + + scl { + pins = "gpio20"; + function = "blsp_i2c_scl_a2"; + }; + }; + + blsp1_i2c3_default: blsp1-i2c3-default { + pins = "gpio84", "gpio85"; + function = "blsp_i2c3"; + }; + + blsp1_i2c4_default: blsp1-i2c4-default { + pins = "gpio117", "gpio118"; + function = "blsp_i2c4"; + }; + + blsp1_uart0_default: blsp1-uart0-default { + pins = "gpio30", "gpio31", "gpio32", "gpio33"; + function = "blsp_uart0"; + }; + + blsp1_uart1_default: blsp1-uart1-default { + pins = "gpio22", "gpio23"; + function = "blsp_uart1"; + }; + + blsp1_uart2_default: blsp1-uart2-default { + rx { + pins = "gpio18"; + function = "blsp_uart_rx_a2"; + }; + + tx { + pins = "gpio17"; + function = "blsp_uart_tx_a2"; + }; + }; + + blsp1_uart3_default: blsp1-uart3-default { + pins = "gpio82", "gpio83", "gpio84", "gpio85"; + function = "blsp_uart3"; + }; + + blsp2_i2c0_default: blsp2-i2c0-default { + pins = "gpio28", "gpio29"; + function = "blsp_i2c5"; + }; + + blsp1_spi0_default: blsp1-spi0-default { + pins = "gpio30", "gpio31", "gpio32", "gpio33"; + function = "blsp_spi0"; + }; + + blsp1_spi1_default: blsp1-spi1-default { + pins = "gpio22", "gpio23", "gpio24", "gpio25"; + function = "blsp_spi1"; + }; + + blsp1_spi2_default: blsp1-spi2-default { + pins = "gpio17", "gpio18", "gpio19", "gpio20"; + function = "blsp_spi2"; + }; + + blsp1_spi3_default: blsp1-spi3-default { + pins = "gpio82", "gpio83", "gpio84", "gpio85"; + function = "blsp_spi3"; + }; + + blsp1_spi4_default: blsp1-spi4-default { + pins = "gpio37", "gpio38", "gpio117", "gpio118"; + function = "blsp_spi4"; + }; + + blsp2_spi0_default: blsp2-spi0-default { + pins = "gpio26", "gpio27", "gpio28", "gpio29"; + function = "blsp_spi5"; + }; + + blsp2_uart0_default: blsp2-uart0-default { + pins = "gpio26", "gpio27", "gpio28", "gpio29"; + function = "blsp_uart5"; + }; }; gcc: clock-controller@1800000 { @@ -335,6 +440,32 @@ status = "okay"; }; + blsp1_uart0: serial@78af000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x078af000 0x200>; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_UART0_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp1_dma 1>, <&blsp1_dma 0>; + dma-names = "rx", "tx"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp1_uart0_default>; + status = "disabled"; + }; + + blsp1_uart1: serial@78b0000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x078b0000 0x200>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp1_dma 3>, <&blsp1_dma 2>; + dma-names = "rx", "tx"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp1_uart1_default>; + status = "disabled"; + }; + blsp1_uart2: serial@78b1000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0x078b1000 0x200>; @@ -343,9 +474,237 @@ clock-names = "core", "iface"; dmas = <&blsp1_dma 5>, <&blsp1_dma 4>; dma-names = "rx", "tx"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp1_uart2_default>; status = "okay"; }; + wifi: wifi@a000000 { + compatible = "qcom,wcn3990-wifi"; + reg = <0xa000000 0x800000>; + reg-names = "membase"; + memory-region = <&wlan_msa_mem>; + interrupts = <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 285 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + blsp1_uart3: serial@78b2000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x078b2000 0x200>; + interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp1_dma 7>, <&blsp1_dma 6>; + dma-names = "rx", "tx"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp1_uart3_default>; + status = "disabled"; + }; + + blsp1_i2c0: i2c@78b5000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x078b5000 0x600>; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_AHB_CLK>, + <&gcc GCC_BLSP1_QUP0_I2C_APPS_CLK>; + clock-names = "iface", "core"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp1_i2c0_default>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp1_spi0: spi@78b5000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078b5000 0x600>; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_AHB_CLK>, + <&gcc GCC_BLSP1_QUP0_SPI_APPS_CLK>; + clock-names = "iface", "core"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp1_spi0_default>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp1_i2c1: i2c@78b6000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x078b6000 0x600>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_AHB_CLK>, + <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>; + clock-names = "iface", "core"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp1_i2c1_default>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp1_spi1: spi@78b6000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078b6000 0x600>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_AHB_CLK>, + <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>; + clock-names = "iface", "core"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp1_spi1_default>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp1_i2c2: i2c@78b7000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x078b7000 0x600>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_AHB_CLK>, + <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>; + clock-names = "iface", "core"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp1_i2c2_default>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp1_spi2: spi@78b7000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078b7000 0x600>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_AHB_CLK>, + <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>; + clock-names = "iface", "core"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp1_spi2_default>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp1_i2c3: i2c@78b8000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x078b8000 0x600>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_AHB_CLK>, + <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>; + clock-names = "iface", "core"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp1_i2c3_default>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp1_spi3: spi@78b8000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078b8000 0x600>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_AHB_CLK>, + <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>; + clock-names = "iface", "core"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp1_spi3_default>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp1_i2c4: i2c@78b9000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x078b9000 0x600>; + interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_AHB_CLK>, + <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>; + clock-names = "iface", "core"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp1_i2c4_default>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp1_spi4: spi@78b9000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078b9000 0x600>; + interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_AHB_CLK>, + <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>; + clock-names = "iface", "core"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp1_spi4_default>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp2_dma: dma@7ac4000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x07ac4000 0x17000>; + interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,controlled-remotely = <1>; + qcom,ee = <0>; + status = "disabled"; + }; + + blsp2_uart0: serial@7aef000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x07aef000 0x200>; + interrupts = <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP2_UART0_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp2_dma 1>, <&blsp2_dma 0>; + dma-names = "rx", "tx"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp2_uart0_default>; + status = "disabled"; + }; + + blsp2_i2c0: i2c@7af5000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x07af5000 0x600>; + interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP2_AHB_CLK>, + <&gcc GCC_BLSP2_QUP0_I2C_APPS_CLK>; + clock-names = "iface", "core"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp2_i2c0_default>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp2_spi0: spi@7af5000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x07af5000 0x600>; + interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP2_AHB_CLK>, + <&gcc GCC_BLSP2_QUP0_SPI_APPS_CLK>; + clock-names = "iface", "core"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp2_spi0_default>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + intc: interrupt-controller@b000000 { compatible = "qcom,msm-qgic2"; interrupt-controller; diff --git a/dts/src/arm64/qcom/sdm845-mtp.dts b/dts/src/arm64/qcom/sdm845-mtp.dts index b3def03581..af8c6a2445 100644 --- a/dts/src/arm64/qcom/sdm845-mtp.dts +++ b/dts/src/arm64/qcom/sdm845-mtp.dts @@ -7,6 +7,7 @@ /dts-v1/; +#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include "sdm845.dtsi" @@ -346,7 +347,9 @@ &gcc { protected-clocks = <GCC_QSPI_CORE_CLK>, <GCC_QSPI_CORE_CLK_SRC>, - <GCC_QSPI_CNOC_PERIPH_AHB_CLK>; + <GCC_QSPI_CNOC_PERIPH_AHB_CLK>, + <GCC_LPASS_Q6_AXI_CLK>, + <GCC_LPASS_SWAY_CLK>; }; &i2c10 { @@ -358,14 +361,36 @@ status = "okay"; }; -&tlmm { - gpio-reserved-ranges = <0 4>, <81 4>; +&sdhc_2 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&sdc2_clk &sdc2_cmd &sdc2_data &sd_card_det_n>; + + vmmc-supply = <&vreg_l21a_2p95>; + vqmmc-supply = <&vddpx_2>; + + cd-gpios = <&tlmm 126 GPIO_ACTIVE_LOW>; }; &uart9 { status = "okay"; }; +&ufs_mem_hc { + status = "okay"; + + vcc-supply = <&vreg_l20a_2p95>; + vcc-max-microamp = <600000>; +}; + +&ufs_mem_phy { + status = "okay"; + + vdda-phy-supply = <&vdda_ufs1_core>; + vdda-pll-supply = <&vdda_ufs1_1p2>; +}; + &usb_1 { status = "okay"; }; @@ -427,6 +452,14 @@ vdda-pll-supply = <&vdda_usb2_ss_core>; }; +&wifi { + status = "okay"; + vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>; + vdd-1.8-xo-supply = <&vreg_l7a_1p8>; + vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; + vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; +}; + /* PINCTRL - additions to nodes defined in sdm845.dtsi */ &qup_i2c10_default { @@ -450,3 +483,48 @@ bias-pull-up; }; }; + +&tlmm { + gpio-reserved-ranges = <0 4>, <81 4>; + + sdc2_clk: sdc2-clk { + pinconf { + pins = "sdc2_clk"; + bias-disable; + + /* + * It seems that mmc_test reports errors if drive + * strength is not 16 on clk, cmd, and data pins. + */ + drive-strength = <16>; + }; + }; + + sdc2_cmd: sdc2-cmd { + pinconf { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <16>; + }; + }; + + sdc2_data: sdc2-data { + pinconf { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <16>; + }; + }; + + sd_card_det_n: sd-card-det-n { + pinmux { + pins = "gpio126"; + function = "gpio"; + }; + + pinconf { + pins = "gpio126"; + bias-pull-up; + }; + }; +}; diff --git a/dts/src/arm64/qcom/sdm845.dtsi b/dts/src/arm64/qcom/sdm845.dtsi index c27cbd3bcb..5308f16718 100644 --- a/dts/src/arm64/qcom/sdm845.dtsi +++ b/dts/src/arm64/qcom/sdm845.dtsi @@ -7,12 +7,17 @@ #include <dt-bindings/clock/qcom,dispcc-sdm845.h> #include <dt-bindings/clock/qcom,gcc-sdm845.h> +#include <dt-bindings/clock/qcom,gpucc-sdm845.h> +#include <dt-bindings/clock/qcom,lpass-sdm845.h> #include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/clock/qcom,videocc-sdm845.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/phy/phy-qcom-qusb2.h> #include <dt-bindings/reset/qcom,sdm845-aoss.h> +#include <dt-bindings/reset/qcom,sdm845-pdc.h> #include <dt-bindings/soc/qcom,rpmh-rsc.h> #include <dt-bindings/clock/qcom,gcc-sdm845.h> +#include <dt-bindings/thermal/thermal.h> / { interrupt-parent = <&intc>; @@ -88,6 +93,21 @@ reg = <0 0x86200000 0 0x2d00000>; no-map; }; + + wlan_msa_mem: memory@96700000 { + reg = <0 0x96700000 0 0x100000>; + no-map; + }; + + mpss_region: memory@8e000000 { + reg = <0 0x8e000000 0 0x7800000>; + no-map; + }; + + mba_region: memory@96500000 { + reg = <0 0x96500000 0 0x200000>; + no-map; + }; }; cpus { @@ -99,6 +119,8 @@ compatible = "qcom,kryo385"; reg = <0x0 0x0>; enable-method = "psci"; + qcom,freq-domain = <&cpufreq_hw 0>; + #cooling-cells = <2>; next-level-cache = <&L2_0>; L2_0: l2-cache { compatible = "cache"; @@ -114,6 +136,8 @@ compatible = "qcom,kryo385"; reg = <0x0 0x100>; enable-method = "psci"; + qcom,freq-domain = <&cpufreq_hw 0>; + #cooling-cells = <2>; next-level-cache = <&L2_100>; L2_100: l2-cache { compatible = "cache"; @@ -126,6 +150,8 @@ compatible = "qcom,kryo385"; reg = <0x0 0x200>; enable-method = "psci"; + qcom,freq-domain = <&cpufreq_hw 0>; + #cooling-cells = <2>; next-level-cache = <&L2_200>; L2_200: l2-cache { compatible = "cache"; @@ -138,6 +164,8 @@ compatible = "qcom,kryo385"; reg = <0x0 0x300>; enable-method = "psci"; + qcom,freq-domain = <&cpufreq_hw 0>; + #cooling-cells = <2>; next-level-cache = <&L2_300>; L2_300: l2-cache { compatible = "cache"; @@ -150,6 +178,8 @@ compatible = "qcom,kryo385"; reg = <0x0 0x400>; enable-method = "psci"; + qcom,freq-domain = <&cpufreq_hw 1>; + #cooling-cells = <2>; next-level-cache = <&L2_400>; L2_400: l2-cache { compatible = "cache"; @@ -162,6 +192,8 @@ compatible = "qcom,kryo385"; reg = <0x0 0x500>; enable-method = "psci"; + qcom,freq-domain = <&cpufreq_hw 1>; + #cooling-cells = <2>; next-level-cache = <&L2_500>; L2_500: l2-cache { compatible = "cache"; @@ -174,6 +206,8 @@ compatible = "qcom,kryo385"; reg = <0x0 0x600>; enable-method = "psci"; + qcom,freq-domain = <&cpufreq_hw 1>; + #cooling-cells = <2>; next-level-cache = <&L2_600>; L2_600: l2-cache { compatible = "cache"; @@ -186,6 +220,8 @@ compatible = "qcom,kryo385"; reg = <0x0 0x700>; enable-method = "psci"; + qcom,freq-domain = <&cpufreq_hw 1>; + #cooling-cells = <2>; next-level-cache = <&L2_700>; L2_700: l2-cache { compatible = "cache"; @@ -222,6 +258,12 @@ }; }; + firmware { + scm { + compatible = "qcom,scm-sdm845", "qcom,scm"; + }; + }; + tcsr_mutex: hwlock { compatible = "qcom,tcsr-mutex"; syscon = <&tcsr_mutex_regs 0 0x1000>; @@ -328,14 +370,15 @@ }; soc: soc { - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0 0 0xffffffff>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0 0 0 0 0x10 0>; + dma-ranges = <0 0 0 0 0x10 0>; compatible = "simple-bus"; gcc: clock-controller@100000 { compatible = "qcom,gcc-sdm845"; - reg = <0x100000 0x1f0000>; + reg = <0 0x00100000 0 0x1f0000>; #clock-cells = <1>; #reset-cells = <1>; #power-domain-cells = <1>; @@ -343,7 +386,7 @@ qfprom@784000 { compatible = "qcom,qfprom"; - reg = <0x784000 0x8ff>; + reg = <0 0x00784000 0 0x8ff>; #address-cells = <1>; #size-cells = <1>; @@ -360,25 +403,25 @@ rng: rng@793000 { compatible = "qcom,prng-ee"; - reg = <0x00793000 0x1000>; + reg = <0 0x00793000 0 0x1000>; clocks = <&gcc GCC_PRNG_AHB_CLK>; clock-names = "core"; }; qupv3_id_0: geniqup@8c0000 { compatible = "qcom,geni-se-qup"; - reg = <0x8c0000 0x6000>; + reg = <0 0x008c0000 0 0x6000>; clock-names = "m-ahb", "s-ahb"; clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; - #address-cells = <1>; - #size-cells = <1>; + #address-cells = <2>; + #size-cells = <2>; ranges; status = "disabled"; i2c0: i2c@880000 { compatible = "qcom,geni-i2c"; - reg = <0x880000 0x4000>; + reg = <0 0x00880000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; pinctrl-names = "default"; @@ -391,7 +434,7 @@ spi0: spi@880000 { compatible = "qcom,geni-spi"; - reg = <0x880000 0x4000>; + reg = <0 0x00880000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; pinctrl-names = "default"; @@ -404,7 +447,7 @@ uart0: serial@880000 { compatible = "qcom,geni-uart"; - reg = <0x880000 0x4000>; + reg = <0 0x00880000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; pinctrl-names = "default"; @@ -415,7 +458,7 @@ i2c1: i2c@884000 { compatible = "qcom,geni-i2c"; - reg = <0x884000 0x4000>; + reg = <0 0x00884000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; pinctrl-names = "default"; @@ -428,7 +471,7 @@ spi1: spi@884000 { compatible = "qcom,geni-spi"; - reg = <0x884000 0x4000>; + reg = <0 0x00884000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; pinctrl-names = "default"; @@ -441,7 +484,7 @@ uart1: serial@884000 { compatible = "qcom,geni-uart"; - reg = <0x884000 0x4000>; + reg = <0 0x00884000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; pinctrl-names = "default"; @@ -452,7 +495,7 @@ i2c2: i2c@888000 { compatible = "qcom,geni-i2c"; - reg = <0x888000 0x4000>; + reg = <0 0x00888000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; pinctrl-names = "default"; @@ -465,7 +508,7 @@ spi2: spi@888000 { compatible = "qcom,geni-spi"; - reg = <0x888000 0x4000>; + reg = <0 0x00888000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; pinctrl-names = "default"; @@ -478,7 +521,7 @@ uart2: serial@888000 { compatible = "qcom,geni-uart"; - reg = <0x888000 0x4000>; + reg = <0 0x00888000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; pinctrl-names = "default"; @@ -489,7 +532,7 @@ i2c3: i2c@88c000 { compatible = "qcom,geni-i2c"; - reg = <0x88c000 0x4000>; + reg = <0 0x0088c000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; pinctrl-names = "default"; @@ -502,7 +545,7 @@ spi3: spi@88c000 { compatible = "qcom,geni-spi"; - reg = <0x88c000 0x4000>; + reg = <0 0x0088c000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; pinctrl-names = "default"; @@ -515,7 +558,7 @@ uart3: serial@88c000 { compatible = "qcom,geni-uart"; - reg = <0x88c000 0x4000>; + reg = <0 0x0088c000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; pinctrl-names = "default"; @@ -526,7 +569,7 @@ i2c4: i2c@890000 { compatible = "qcom,geni-i2c"; - reg = <0x890000 0x4000>; + reg = <0 0x00890000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; pinctrl-names = "default"; @@ -539,7 +582,7 @@ spi4: spi@890000 { compatible = "qcom,geni-spi"; - reg = <0x890000 0x4000>; + reg = <0 0x00890000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; pinctrl-names = "default"; @@ -552,7 +595,7 @@ uart4: serial@890000 { compatible = "qcom,geni-uart"; - reg = <0x890000 0x4000>; + reg = <0 0x00890000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; pinctrl-names = "default"; @@ -563,7 +606,7 @@ i2c5: i2c@894000 { compatible = "qcom,geni-i2c"; - reg = <0x894000 0x4000>; + reg = <0 0x00894000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; pinctrl-names = "default"; @@ -576,7 +619,7 @@ spi5: spi@894000 { compatible = "qcom,geni-spi"; - reg = <0x894000 0x4000>; + reg = <0 0x00894000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; pinctrl-names = "default"; @@ -589,7 +632,7 @@ uart5: serial@894000 { compatible = "qcom,geni-uart"; - reg = <0x894000 0x4000>; + reg = <0 0x00894000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; pinctrl-names = "default"; @@ -600,7 +643,7 @@ i2c6: i2c@898000 { compatible = "qcom,geni-i2c"; - reg = <0x898000 0x4000>; + reg = <0 0x00898000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; pinctrl-names = "default"; @@ -613,7 +656,7 @@ spi6: spi@898000 { compatible = "qcom,geni-spi"; - reg = <0x898000 0x4000>; + reg = <0 0x00898000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; pinctrl-names = "default"; @@ -626,7 +669,7 @@ uart6: serial@898000 { compatible = "qcom,geni-uart"; - reg = <0x898000 0x4000>; + reg = <0 0x00898000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; pinctrl-names = "default"; @@ -637,7 +680,7 @@ i2c7: i2c@89c000 { compatible = "qcom,geni-i2c"; - reg = <0x89c000 0x4000>; + reg = <0 0x0089c000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; pinctrl-names = "default"; @@ -650,7 +693,7 @@ spi7: spi@89c000 { compatible = "qcom,geni-spi"; - reg = <0x89c000 0x4000>; + reg = <0 0x0089c000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; pinctrl-names = "default"; @@ -663,7 +706,7 @@ uart7: serial@89c000 { compatible = "qcom,geni-uart"; - reg = <0x89c000 0x4000>; + reg = <0 0x0089c000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; pinctrl-names = "default"; @@ -675,18 +718,18 @@ qupv3_id_1: geniqup@ac0000 { compatible = "qcom,geni-se-qup"; - reg = <0xac0000 0x6000>; + reg = <0 0x00ac0000 0 0x6000>; clock-names = "m-ahb", "s-ahb"; clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; - #address-cells = <1>; - #size-cells = <1>; + #address-cells = <2>; + #size-cells = <2>; ranges; status = "disabled"; i2c8: i2c@a80000 { compatible = "qcom,geni-i2c"; - reg = <0xa80000 0x4000>; + reg = <0 0x00a80000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; pinctrl-names = "default"; @@ -699,7 +742,7 @@ spi8: spi@a80000 { compatible = "qcom,geni-spi"; - reg = <0xa80000 0x4000>; + reg = <0 0x00a80000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; pinctrl-names = "default"; @@ -712,7 +755,7 @@ uart8: serial@a80000 { compatible = "qcom,geni-uart"; - reg = <0xa80000 0x4000>; + reg = <0 0x00a80000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; pinctrl-names = "default"; @@ -723,7 +766,7 @@ i2c9: i2c@a84000 { compatible = "qcom,geni-i2c"; - reg = <0xa84000 0x4000>; + reg = <0 0x00a84000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; pinctrl-names = "default"; @@ -736,7 +779,7 @@ spi9: spi@a84000 { compatible = "qcom,geni-spi"; - reg = <0xa84000 0x4000>; + reg = <0 0x00a84000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; pinctrl-names = "default"; @@ -749,7 +792,7 @@ uart9: serial@a84000 { compatible = "qcom,geni-debug-uart"; - reg = <0xa84000 0x4000>; + reg = <0 0x00a84000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; pinctrl-names = "default"; @@ -760,7 +803,7 @@ i2c10: i2c@a88000 { compatible = "qcom,geni-i2c"; - reg = <0xa88000 0x4000>; + reg = <0 0x00a88000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; pinctrl-names = "default"; @@ -773,7 +816,7 @@ spi10: spi@a88000 { compatible = "qcom,geni-spi"; - reg = <0xa88000 0x4000>; + reg = <0 0x00a88000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; pinctrl-names = "default"; @@ -786,7 +829,7 @@ uart10: serial@a88000 { compatible = "qcom,geni-uart"; - reg = <0xa88000 0x4000>; + reg = <0 0x00a88000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; pinctrl-names = "default"; @@ -797,7 +840,7 @@ i2c11: i2c@a8c000 { compatible = "qcom,geni-i2c"; - reg = <0xa8c000 0x4000>; + reg = <0 0x00a8c000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; pinctrl-names = "default"; @@ -810,7 +853,7 @@ spi11: spi@a8c000 { compatible = "qcom,geni-spi"; - reg = <0xa8c000 0x4000>; + reg = <0 0x00a8c000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; pinctrl-names = "default"; @@ -823,7 +866,7 @@ uart11: serial@a8c000 { compatible = "qcom,geni-uart"; - reg = <0xa8c000 0x4000>; + reg = <0 0x00a8c000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; pinctrl-names = "default"; @@ -834,7 +877,7 @@ i2c12: i2c@a90000 { compatible = "qcom,geni-i2c"; - reg = <0xa90000 0x4000>; + reg = <0 0x00a90000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; pinctrl-names = "default"; @@ -847,7 +890,7 @@ spi12: spi@a90000 { compatible = "qcom,geni-spi"; - reg = <0xa90000 0x4000>; + reg = <0 0x00a90000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; pinctrl-names = "default"; @@ -860,7 +903,7 @@ uart12: serial@a90000 { compatible = "qcom,geni-uart"; - reg = <0xa90000 0x4000>; + reg = <0 0x00a90000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; pinctrl-names = "default"; @@ -871,7 +914,7 @@ i2c13: i2c@a94000 { compatible = "qcom,geni-i2c"; - reg = <0xa94000 0x4000>; + reg = <0 0x00a94000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; pinctrl-names = "default"; @@ -884,7 +927,7 @@ spi13: spi@a94000 { compatible = "qcom,geni-spi"; - reg = <0xa94000 0x4000>; + reg = <0 0x00a94000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; pinctrl-names = "default"; @@ -897,7 +940,7 @@ uart13: serial@a94000 { compatible = "qcom,geni-uart"; - reg = <0xa94000 0x4000>; + reg = <0 0x00a94000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; pinctrl-names = "default"; @@ -908,7 +951,7 @@ i2c14: i2c@a98000 { compatible = "qcom,geni-i2c"; - reg = <0xa98000 0x4000>; + reg = <0 0x00a98000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; pinctrl-names = "default"; @@ -921,7 +964,7 @@ spi14: spi@a98000 { compatible = "qcom,geni-spi"; - reg = <0xa98000 0x4000>; + reg = <0 0x00a98000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; pinctrl-names = "default"; @@ -934,7 +977,7 @@ uart14: serial@a98000 { compatible = "qcom,geni-uart"; - reg = <0xa98000 0x4000>; + reg = <0 0x00a98000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; pinctrl-names = "default"; @@ -945,7 +988,7 @@ i2c15: i2c@a9c000 { compatible = "qcom,geni-i2c"; - reg = <0xa9c000 0x4000>; + reg = <0 0x00a9c000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; pinctrl-names = "default"; @@ -958,7 +1001,7 @@ spi15: spi@a9c000 { compatible = "qcom,geni-spi"; - reg = <0xa9c000 0x4000>; + reg = <0 0x00a9c000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; pinctrl-names = "default"; @@ -971,7 +1014,7 @@ uart15: serial@a9c000 { compatible = "qcom,geni-uart"; - reg = <0xa9c000 0x4000>; + reg = <0 0x00a9c000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; pinctrl-names = "default"; @@ -981,19 +1024,121 @@ }; }; + ufs_mem_hc: ufshc@1d84000 { + compatible = "qcom,sdm845-ufshc", "qcom,ufshc", + "jedec,ufs-2.0"; + reg = <0 0x01d84000 0 0x2500>; + interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; + phys = <&ufs_mem_phy_lanes>; + phy-names = "ufsphy"; + lanes-per-direction = <2>; + power-domains = <&gcc UFS_PHY_GDSC>; + + iommus = <&apps_smmu 0x100 0xf>; + + clock-names = + "core_clk", + "bus_aggr_clk", + "iface_clk", + "core_clk_unipro", + "ref_clk", + "tx_lane0_sync_clk", + "rx_lane0_sync_clk", + "rx_lane1_sync_clk"; + clocks = + <&gcc GCC_UFS_PHY_AXI_CLK>, + <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, + <&gcc GCC_UFS_PHY_AHB_CLK>, + <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>; + freq-table-hz = + <50000000 200000000>, + <0 0>, + <0 0>, + <37500000 150000000>, + <0 0>, + <0 0>, + <0 0>, + <0 0>; + + status = "disabled"; + }; + + ufs_mem_phy: phy@1d87000 { + compatible = "qcom,sdm845-qmp-ufs-phy"; + reg = <0 0x01d87000 0 0x18c>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clock-names = "ref", + "ref_aux"; + clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>, + <&gcc GCC_UFS_PHY_PHY_AUX_CLK>; + + status = "disabled"; + + ufs_mem_phy_lanes: lanes@1d87400 { + reg = <0 0x01d87400 0 0x108>, + <0 0x01d87600 0 0x1e0>, + <0 0x01d87c00 0 0x1dc>, + <0 0x01d87800 0 0x108>, + <0 0x01d87a00 0 0x1e0>; + #phy-cells = <0>; + }; + }; + tcsr_mutex_regs: syscon@1f40000 { compatible = "syscon"; - reg = <0x1f40000 0x40000>; + reg = <0 0x01f40000 0 0x40000>; }; tlmm: pinctrl@3400000 { compatible = "qcom,sdm845-pinctrl"; - reg = <0x03400000 0xc00000>; + reg = <0 0x03400000 0 0xc00000>; interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + gpio-ranges = <&tlmm 0 0 150>; + + qspi_clk: qspi-clk { + pinmux { + pins = "gpio95"; + function = "qspi_clk"; + }; + }; + + qspi_cs0: qspi-cs0 { + pinmux { + pins = "gpio90"; + function = "qspi_cs"; + }; + }; + + qspi_cs1: qspi-cs1 { + pinmux { + pins = "gpio89"; + function = "qspi_cs"; + }; + }; + + qspi_data01: qspi-data01 { + pinmux-data { + pins = "gpio91", "gpio92"; + function = "qspi_data"; + }; + }; + + qspi_data12: qspi-data12 { + pinmux-data { + pins = "gpio93", "gpio94"; + function = "qspi_data"; + }; + }; qup_i2c0_default: qup-i2c0-default { pinmux { @@ -1348,9 +1493,47 @@ }; }; + gpucc: clock-controller@5090000 { + compatible = "qcom,sdm845-gpucc"; + reg = <0 0x05090000 0 0x9000>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + }; + + sdhc_2: sdhci@8804000 { + compatible = "qcom,sdm845-sdhci", "qcom,sdhci-msm-v5"; + reg = <0 0x08804000 0 0x1000>; + + interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC2_AHB_CLK>, + <&gcc GCC_SDCC2_APPS_CLK>; + clock-names = "iface", "core"; + iommus = <&apps_smmu 0xa0 0xf>; + + status = "disabled"; + }; + + qspi: spi@88df000 { + compatible = "qcom,sdm845-qspi", "qcom,qspi-v1"; + reg = <0 0x088df000 0 0x600>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QSPI_CNOC_PERIPH_AHB_CLK>, + <&gcc GCC_QSPI_CORE_CLK>; + clock-names = "iface", "core"; + status = "disabled"; + }; + usb_1_hsphy: phy@88e2000 { compatible = "qcom,sdm845-qusb2-phy"; - reg = <0x88e2000 0x400>; + reg = <0 0x088e2000 0 0x400>; status = "disabled"; #phy-cells = <0>; @@ -1365,7 +1548,7 @@ usb_2_hsphy: phy@88e3000 { compatible = "qcom,sdm845-qusb2-phy"; - reg = <0x88e3000 0x400>; + reg = <0 0x088e3000 0 0x400>; status = "disabled"; #phy-cells = <0>; @@ -1380,13 +1563,13 @@ usb_1_qmpphy: phy@88e9000 { compatible = "qcom,sdm845-qmp-usb3-phy"; - reg = <0x88e9000 0x18c>, - <0x88e8000 0x10>; + reg = <0 0x088e9000 0 0x18c>, + <0 0x088e8000 0 0x10>; reg-names = "reg-base", "dp_com"; status = "disabled"; #clock-cells = <1>; - #address-cells = <1>; - #size-cells = <1>; + #address-cells = <2>; + #size-cells = <2>; ranges; clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, @@ -1399,11 +1582,13 @@ <&gcc GCC_USB3_PHY_PRIM_BCR>; reset-names = "phy", "common"; - usb_1_ssphy: lane@88e9200 { - reg = <0x88e9200 0x128>, - <0x88e9400 0x200>, - <0x88e9c00 0x218>, - <0x88e9a00 0x100>; + usb_1_ssphy: lanes@88e9200 { + reg = <0 0x088e9200 0 0x128>, + <0 0x088e9400 0 0x200>, + <0 0x088e9c00 0 0x218>, + <0 0x088e9600 0 0x128>, + <0 0x088e9800 0 0x200>, + <0 0x088e9a00 0 0x100>; #phy-cells = <0>; clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; clock-names = "pipe0"; @@ -1413,11 +1598,11 @@ usb_2_qmpphy: phy@88eb000 { compatible = "qcom,sdm845-qmp-usb3-uni-phy"; - reg = <0x88eb000 0x18c>; + reg = <0 0x088eb000 0 0x18c>; status = "disabled"; #clock-cells = <1>; - #address-cells = <1>; - #size-cells = <1>; + #address-cells = <2>; + #size-cells = <2>; ranges; clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>, @@ -1431,10 +1616,10 @@ reset-names = "phy", "common"; usb_2_ssphy: lane@88eb200 { - reg = <0x88eb200 0x128>, - <0x88eb400 0x1fc>, - <0x88eb800 0x218>, - <0x88e9600 0x70>; + reg = <0 0x088eb200 0 0x128>, + <0 0x088eb400 0 0x1fc>, + <0 0x088eb800 0 0x218>, + <0 0x088eb600 0 0x70>; #phy-cells = <0>; clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>; clock-names = "pipe0"; @@ -1444,11 +1629,12 @@ usb_1: usb@a6f8800 { compatible = "qcom,sdm845-dwc3", "qcom,dwc3"; - reg = <0xa6f8800 0x400>; + reg = <0 0x0a6f8800 0 0x400>; status = "disabled"; - #address-cells = <1>; - #size-cells = <1>; + #address-cells = <2>; + #size-cells = <2>; ranges; + dma-ranges; clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, <&gcc GCC_USB30_PRIM_MASTER_CLK>, @@ -1475,8 +1661,9 @@ usb_1_dwc3: dwc3@a600000 { compatible = "snps,dwc3"; - reg = <0xa600000 0xcd00>; + reg = <0 0x0a600000 0 0xcd00>; interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&apps_smmu 0x740 0>; snps,dis_u2_susphy_quirk; snps,dis_enblslpm_quirk; phys = <&usb_1_hsphy>, <&usb_1_ssphy>; @@ -1486,11 +1673,12 @@ usb_2: usb@a8f8800 { compatible = "qcom,sdm845-dwc3", "qcom,dwc3"; - reg = <0xa8f8800 0x400>; + reg = <0 0x0a8f8800 0 0x400>; status = "disabled"; - #address-cells = <1>; - #size-cells = <1>; + #address-cells = <2>; + #size-cells = <2>; ranges; + dma-ranges; clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>, <&gcc GCC_USB30_SEC_MASTER_CLK>, @@ -1517,8 +1705,9 @@ usb_2_dwc3: dwc3@a800000 { compatible = "snps,dwc3"; - reg = <0xa800000 0xcd00>; + reg = <0 0x0a800000 0 0xcd00>; interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&apps_smmu 0x760 0>; snps,dis_u2_susphy_quirk; snps,dis_enblslpm_quirk; phys = <&usb_2_hsphy>, <&usb_2_ssphy>; @@ -1526,43 +1715,260 @@ }; }; + videocc: clock-controller@ab00000 { + compatible = "qcom,sdm845-videocc"; + reg = <0 0x0ab00000 0 0x10000>; + #clock-cells = <1>; + #power-domain-cells = <1>; + #reset-cells = <1>; + }; + + mdss: mdss@ae00000 { + compatible = "qcom,sdm845-mdss"; + reg = <0 0x0ae00000 0 0x1000>; + reg-names = "mdss"; + + power-domains = <&dispcc MDSS_GDSC>; + + clocks = <&gcc GCC_DISP_AHB_CLK>, + <&gcc GCC_DISP_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + clock-names = "iface", "bus", "core"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>; + assigned-clock-rates = <300000000>; + + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + iommus = <&apps_smmu 0x880 0x8>, + <&apps_smmu 0xc80 0x8>; + + status = "disabled"; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + mdss_mdp: mdp@ae01000 { + compatible = "qcom,sdm845-dpu"; + reg = <0 0x0ae01000 0 0x8f000>, + <0 0x0aeb0000 0 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "iface", "bus", "core", "vsync"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + assigned-clock-rates = <300000000>, + <19200000>; + + interrupt-parent = <&mdss>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + dpu_intf2_out: endpoint { + remote-endpoint = <&dsi1_in>; + }; + }; + }; + }; + + dsi0: dsi@ae94000 { + compatible = "qcom,mdss-dsi-ctrl"; + reg = <0 0x0ae94000 0 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc DISP_CC_MDSS_ESC0_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + phys = <&dsi0_phy>; + phy-names = "dsi"; + + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + dsi0_out: endpoint { + }; + }; + }; + }; + + dsi0_phy: dsi-phy@ae94400 { + compatible = "qcom,dsi-phy-10nm"; + reg = <0 0x0ae94400 0 0x200>, + <0 0x0ae94600 0 0x280>, + <0 0x0ae94a00 0 0x1e0>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>; + clock-names = "iface"; + + status = "disabled"; + }; + + dsi1: dsi@ae96000 { + compatible = "qcom,mdss-dsi-ctrl"; + reg = <0 0x0ae96000 0 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>, + <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK1_CLK>, + <&dispcc DISP_CC_MDSS_ESC1_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + phys = <&dsi1_phy>; + phy-names = "dsi"; + + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi1_in: endpoint { + remote-endpoint = <&dpu_intf2_out>; + }; + }; + + port@1 { + reg = <1>; + dsi1_out: endpoint { + }; + }; + }; + }; + + dsi1_phy: dsi-phy@ae96400 { + compatible = "qcom,dsi-phy-10nm"; + reg = <0 0x0ae96400 0 0x200>, + <0 0x0ae96600 0 0x280>, + <0 0x0ae96a00 0 0x10e>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>; + clock-names = "iface"; + + status = "disabled"; + }; + }; + dispcc: clock-controller@af00000 { compatible = "qcom,sdm845-dispcc"; - reg = <0xaf00000 0x10000>; + reg = <0 0x0af00000 0 0x10000>; #clock-cells = <1>; #reset-cells = <1>; #power-domain-cells = <1>; }; + pdc_reset: reset-controller@b2e0000 { + compatible = "qcom,sdm845-pdc-global"; + reg = <0 0x0b2e0000 0 0x20000>; + #reset-cells = <1>; + }; + tsens0: thermal-sensor@c263000 { compatible = "qcom,sdm845-tsens", "qcom,tsens-v2"; - reg = <0xc263000 0x1ff>, /* TM */ - <0xc222000 0x1ff>; /* SROT */ + reg = <0 0x0c263000 0 0x1ff>, /* TM */ + <0 0x0c222000 0 0x1ff>; /* SROT */ #qcom,sensors = <13>; #thermal-sensor-cells = <1>; }; tsens1: thermal-sensor@c265000 { compatible = "qcom,sdm845-tsens", "qcom,tsens-v2"; - reg = <0xc265000 0x1ff>, /* TM */ - <0xc223000 0x1ff>; /* SROT */ + reg = <0 0x0c265000 0 0x1ff>, /* TM */ + <0 0x0c223000 0 0x1ff>; /* SROT */ #qcom,sensors = <8>; #thermal-sensor-cells = <1>; }; aoss_reset: reset-controller@c2a0000 { compatible = "qcom,sdm845-aoss-cc"; - reg = <0xc2a0000 0x31000>; + reg = <0 0x0c2a0000 0 0x31000>; #reset-cells = <1>; }; spmi_bus: spmi@c440000 { compatible = "qcom,spmi-pmic-arb"; - reg = <0xc440000 0x1100>, - <0xc600000 0x2000000>, - <0xe600000 0x100000>, - <0xe700000 0xa0000>, - <0xc40a000 0x26000>; + reg = <0 0x0c440000 0 0x1100>, + <0 0x0c600000 0 0x2000000>, + <0 0x0e600000 0 0x100000>, + <0 0x0e700000 0 0xa0000>, + <0 0x0c40a000 0 0x26000>; reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; interrupt-names = "periph_irq"; interrupts = <GIC_SPI 481 IRQ_TYPE_LEVEL_HIGH>; @@ -1575,18 +1981,98 @@ cell-index = <0>; }; + apps_smmu: iommu@15000000 { + compatible = "qcom,sdm845-smmu-500", "arm,mmu-500"; + reg = <0 0x15000000 0 0x80000>; + #iommu-cells = <2>; + #global-interrupts = <1>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>; + }; + + lpasscc: clock-controller@17014000 { + compatible = "qcom,sdm845-lpasscc"; + reg = <0 0x17014000 0 0x1f004>, <0 0x17300000 0 0x200>; + reg-names = "cc", "qdsp6ss"; + #clock-cells = <1>; + status = "disabled"; + }; + apss_shared: mailbox@17990000 { compatible = "qcom,sdm845-apss-shared"; - reg = <0x17990000 0x1000>; + reg = <0 0x17990000 0 0x1000>; #mbox-cells = <1>; }; apps_rsc: rsc@179c0000 { label = "apps_rsc"; compatible = "qcom,rpmh-rsc"; - reg = <0x179c0000 0x10000>, - <0x179d0000 0x10000>, - <0x179e0000 0x10000>; + reg = <0 0x179c0000 0 0x10000>, + <0 0x179d0000 0 0x10000>, + <0 0x179e0000 0 0x10000>; reg-names = "drv-0", "drv-1", "drv-2"; interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, @@ -1602,85 +2088,175 @@ compatible = "qcom,sdm845-rpmh-clk"; #clock-cells = <1>; }; + + rpmhpd: power-controller { + compatible = "qcom,sdm845-rpmhpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmhpd_opp_table>; + + rpmhpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmhpd_opp_ret: opp1 { + opp-level = <16>; + }; + + rpmhpd_opp_min_svs: opp2 { + opp-level = <48>; + }; + + rpmhpd_opp_low_svs: opp3 { + opp-level = <64>; + }; + + rpmhpd_opp_svs: opp4 { + opp-level = <128>; + }; + + rpmhpd_opp_svs_l1: opp5 { + opp-level = <192>; + }; + + rpmhpd_opp_nom: opp6 { + opp-level = <256>; + }; + + rpmhpd_opp_nom_l1: opp7 { + opp-level = <320>; + }; + + rpmhpd_opp_nom_l2: opp8 { + opp-level = <336>; + }; + + rpmhpd_opp_turbo: opp9 { + opp-level = <384>; + }; + + rpmhpd_opp_turbo_l1: opp10 { + opp-level = <416>; + }; + }; + }; + + rsc_hlos: interconnect { + compatible = "qcom,sdm845-rsc-hlos"; + #interconnect-cells = <1>; + }; }; intc: interrupt-controller@17a00000 { compatible = "arm,gic-v3"; - #address-cells = <1>; - #size-cells = <1>; + #address-cells = <2>; + #size-cells = <2>; ranges; #interrupt-cells = <3>; interrupt-controller; - reg = <0x17a00000 0x10000>, /* GICD */ - <0x17a60000 0x100000>; /* GICR * 8 */ + reg = <0 0x17a00000 0 0x10000>, /* GICD */ + <0 0x17a60000 0 0x100000>; /* GICR * 8 */ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; gic-its@17a40000 { compatible = "arm,gic-v3-its"; msi-controller; #msi-cells = <1>; - reg = <0x17a40000 0x20000>; + reg = <0 0x17a40000 0 0x20000>; status = "disabled"; }; }; timer@17c90000 { - #address-cells = <1>; - #size-cells = <1>; + #address-cells = <2>; + #size-cells = <2>; ranges; compatible = "arm,armv7-timer-mem"; - reg = <0x17c90000 0x1000>; + reg = <0 0x17c90000 0 0x1000>; frame@17ca0000 { frame-number = <0>; interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x17ca0000 0x1000>, - <0x17cb0000 0x1000>; + reg = <0 0x17ca0000 0 0x1000>, + <0 0x17cb0000 0 0x1000>; }; frame@17cc0000 { frame-number = <1>; interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x17cc0000 0x1000>; + reg = <0 0x17cc0000 0 0x1000>; status = "disabled"; }; frame@17cd0000 { frame-number = <2>; interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x17cd0000 0x1000>; + reg = <0 0x17cd0000 0 0x1000>; status = "disabled"; }; frame@17ce0000 { frame-number = <3>; interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x17ce0000 0x1000>; + reg = <0 0x17ce0000 0 0x1000>; status = "disabled"; }; frame@17cf0000 { frame-number = <4>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x17cf0000 0x1000>; + reg = <0 0x17cf0000 0 0x1000>; status = "disabled"; }; frame@17d00000 { frame-number = <5>; interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x17d00000 0x1000>; + reg = <0 0x17d00000 0 0x1000>; status = "disabled"; }; frame@17d10000 { frame-number = <6>; interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x17d10000 0x1000>; + reg = <0 0x17d10000 0 0x1000>; status = "disabled"; }; }; + + cpufreq_hw: cpufreq@17d43000 { + compatible = "qcom,cpufreq-hw"; + reg = <0 0x17d43000 0 0x1400>, <0 0x17d45800 0 0x1400>; + reg-names = "freq-domain0", "freq-domain1"; + + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>; + clock-names = "xo", "alternate"; + + #freq-domain-cells = <1>; + }; + + wifi: wifi@18800000 { + compatible = "qcom,wcn3990-wifi"; + status = "disabled"; + reg = <0 0x18800000 0 0x800000>; + reg-names = "membase"; + memory-region = <&wlan_msa_mem>; + clock-names = "cxo_ref_clk_pin"; + clocks = <&rpmhcc RPMH_RF_CLK2>; + interrupts = + <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&apps_smmu 0x0040 0x1>; + }; }; thermal-zones { @@ -1691,18 +2267,41 @@ thermal-sensors = <&tsens0 1>; trips { - cpu_alert0: trip0 { - temperature = <75000>; + cpu0_alert0: trip-point@0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu0_alert1: trip-point@1 { + temperature = <95000>; hysteresis = <2000>; type = "passive"; }; - cpu_crit0: trip1 { + cpu0_crit: cpu_crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; }; }; + + cooling-maps { + map0 { + trip = <&cpu0_alert0>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu0_alert1>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; }; cpu1-thermal { @@ -1712,18 +2311,41 @@ thermal-sensors = <&tsens0 2>; trips { - cpu_alert1: trip0 { - temperature = <75000>; + cpu1_alert0: trip-point@0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu1_alert1: trip-point@1 { + temperature = <95000>; hysteresis = <2000>; type = "passive"; }; - cpu_crit1: trip1 { + cpu1_crit: cpu_crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; }; }; + + cooling-maps { + map0 { + trip = <&cpu1_alert0>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu1_alert1>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; }; cpu2-thermal { @@ -1733,18 +2355,41 @@ thermal-sensors = <&tsens0 3>; trips { - cpu_alert2: trip0 { - temperature = <75000>; + cpu2_alert0: trip-point@0 { + temperature = <90000>; hysteresis = <2000>; type = "passive"; }; - cpu_crit2: trip1 { + cpu2_alert1: trip-point@1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu2_crit: cpu_crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; }; }; + + cooling-maps { + map0 { + trip = <&cpu2_alert0>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu2_alert1>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; }; cpu3-thermal { @@ -1754,18 +2399,41 @@ thermal-sensors = <&tsens0 4>; trips { - cpu_alert3: trip0 { - temperature = <75000>; + cpu3_alert0: trip-point@0 { + temperature = <90000>; hysteresis = <2000>; type = "passive"; }; - cpu_crit3: trip1 { + cpu3_alert1: trip-point@1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu3_crit: cpu_crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; }; }; + + cooling-maps { + map0 { + trip = <&cpu3_alert0>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu3_alert1>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; }; cpu4-thermal { @@ -1775,18 +2443,41 @@ thermal-sensors = <&tsens0 7>; trips { - cpu_alert4: trip0 { - temperature = <75000>; + cpu4_alert0: trip-point@0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4_alert1: trip-point@1 { + temperature = <95000>; hysteresis = <2000>; type = "passive"; }; - cpu_crit4: trip1 { + cpu4_crit: cpu_crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; }; }; + + cooling-maps { + map0 { + trip = <&cpu4_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu4_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; }; cpu5-thermal { @@ -1796,18 +2487,41 @@ thermal-sensors = <&tsens0 8>; trips { - cpu_alert5: trip0 { - temperature = <75000>; + cpu5_alert0: trip-point@0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5_alert1: trip-point@1 { + temperature = <95000>; hysteresis = <2000>; type = "passive"; }; - cpu_crit5: trip1 { + cpu5_crit: cpu_crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; }; }; + + cooling-maps { + map0 { + trip = <&cpu5_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu5_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; }; cpu6-thermal { @@ -1817,18 +2531,41 @@ thermal-sensors = <&tsens0 9>; trips { - cpu_alert6: trip0 { - temperature = <75000>; + cpu6_alert0: trip-point@0 { + temperature = <90000>; hysteresis = <2000>; type = "passive"; }; - cpu_crit6: trip1 { + cpu6_alert1: trip-point@1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6_crit: cpu_crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; }; }; + + cooling-maps { + map0 { + trip = <&cpu6_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu6_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; }; cpu7-thermal { @@ -1838,18 +2575,41 @@ thermal-sensors = <&tsens0 10>; trips { - cpu_alert7: trip0 { - temperature = <75000>; + cpu7_alert0: trip-point@0 { + temperature = <90000>; hysteresis = <2000>; type = "passive"; }; - cpu_crit7: trip1 { + cpu7_alert1: trip-point@1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_crit: cpu_crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; }; }; + + cooling-maps { + map0 { + trip = <&cpu7_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu7_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; }; }; }; diff --git a/dts/src/arm64/realtek/rtd1295.dtsi b/dts/src/arm64/realtek/rtd1295.dtsi index 8d9ac05d17..41d7858da8 100644 --- a/dts/src/arm64/realtek/rtd1295.dtsi +++ b/dts/src/arm64/realtek/rtd1295.dtsi @@ -17,28 +17,28 @@ cpu0: cpu@0 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x0>; next-level-cache = <&l2>; }; cpu1: cpu@1 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x1>; next-level-cache = <&l2>; }; cpu2: cpu@2 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x2>; next-level-cache = <&l2>; }; cpu3: cpu@3 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x3>; next-level-cache = <&l2>; }; diff --git a/dts/src/arm64/renesas/cat875.dtsi b/dts/src/arm64/renesas/cat875.dtsi new file mode 100644 index 0000000000..14db66755a --- /dev/null +++ b/dts/src/arm64/renesas/cat875.dtsi @@ -0,0 +1,44 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the Silicon Linux sub board for CAT874 (CAT875) + * + * Copyright (C) 2019 Renesas Electronics Corp. + */ + +/ { + model = "Silicon Linux sub board for CAT874 (CAT875)"; + + aliases { + ethernet0 = &avb; + }; +}; + +&avb { + pinctrl-0 = <&avb_pins>; + pinctrl-names = "default"; + renesas,no-ether-link; + phy-handle = <&phy0>; + phy-mode = "rgmii"; + status = "okay"; + + phy0: ethernet-phy@0 { + rxc-skew-ps = <1500>; + reg = <0>; + interrupt-parent = <&gpio2>; + interrupts = <21 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>; + }; +}; + +&pciec0 { + status = "okay"; +}; + +&pfc { + avb_pins: avb { + mux { + groups = "avb_mii"; + function = "avb"; + }; + }; +}; diff --git a/dts/src/arm64/renesas/r8a774a1.dtsi b/dts/src/arm64/renesas/r8a774a1.dtsi index 719ed9d906..ef3cff2dd1 100644 --- a/dts/src/arm64/renesas/r8a774a1.dtsi +++ b/dts/src/arm64/renesas/r8a774a1.dtsi @@ -61,7 +61,7 @@ #size-cells = <0>; a57_0: cpu@0 { - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0x0>; device_type = "cpu"; power-domains = <&sysc R8A774A1_PD_CA57_CPU0>; @@ -71,7 +71,7 @@ }; a57_1: cpu@1 { - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0x1>; device_type = "cpu"; power-domains = <&sysc R8A774A1_PD_CA57_CPU1>; @@ -81,7 +81,7 @@ }; a53_0: cpu@100 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x100>; device_type = "cpu"; power-domains = <&sysc R8A774A1_PD_CA53_CPU0>; @@ -91,7 +91,7 @@ }; a53_1: cpu@101 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x101>; device_type = "cpu"; power-domains = <&sysc R8A774A1_PD_CA53_CPU1>; @@ -101,7 +101,7 @@ }; a53_2: cpu@102 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x102>; device_type = "cpu"; power-domains = <&sysc R8A774A1_PD_CA53_CPU2>; @@ -111,7 +111,7 @@ }; a53_3: cpu@103 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x103>; device_type = "cpu"; power-domains = <&sysc R8A774A1_PD_CA53_CPU3>; @@ -599,7 +599,7 @@ hsusb: usb@e6590000 { compatible = "renesas,usbhs-r8a774a1", "renesas,rcar-gen3-usbhs"; - reg = <0 0xe6590000 0 0x100>; + reg = <0 0xe6590000 0 0x200>; interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 704>; dmas = <&usb_dmac0 0>, <&usb_dmac0 1>, diff --git a/dts/src/arm64/renesas/r8a774c0-cat874.dts b/dts/src/arm64/renesas/r8a774c0-cat874.dts new file mode 100644 index 0000000000..96ee0d2c63 --- /dev/null +++ b/dts/src/arm64/renesas/r8a774c0-cat874.dts @@ -0,0 +1,106 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the Silicon Linux RZ/G2E 96board platform (CAT874) + * + * Copyright (C) 2019 Renesas Electronics Corp. + */ + +/dts-v1/; +#include "r8a774c0.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Silicon Linux RZ/G2E 96board platform (CAT874)"; + compatible = "si-linux,cat874", "renesas,r8a774c0"; + + aliases { + serial0 = &scif2; + }; + + chosen { + bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; + stdout-path = "serial0:115200n8"; + }; + + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0x0 0x48000000 0x0 0x78000000>; + }; + + vcc_sdhi0: regulator-vcc-sdhi0 { + compatible = "regulator-fixed"; + + regulator-name = "SDHI0 Vcc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + vccq_sdhi0: regulator-vccq-sdhi0 { + compatible = "regulator-gpio"; + + regulator-name = "SDHI0 VccQ"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>; + gpios-states = <1>; + states = <3300000 1 + 1800000 0>; + }; +}; + +&extal_clk { + clock-frequency = <48000000>; +}; + +&pcie_bus_clk { + clock-frequency = <100000000>; +}; + +&pciec0 { + /* Map all possible DDR as inbound ranges */ + dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>; +}; + +&pfc { + scif2_pins: scif2 { + groups = "scif2_data_a"; + function = "scif2"; + }; + + sdhi0_pins: sd0 { + groups = "sdhi0_data4", "sdhi0_ctrl"; + function = "sdhi0"; + power-source = <3300>; + }; + + sdhi0_pins_uhs: sd0_uhs { + groups = "sdhi0_data4", "sdhi0_ctrl"; + function = "sdhi0"; + power-source = <1800>; + }; +}; + +&scif2 { + pinctrl-0 = <&scif2_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&sdhi0 { + pinctrl-0 = <&sdhi0_pins>; + pinctrl-1 = <&sdhi0_pins_uhs>; + pinctrl-names = "default", "state_uhs"; + + vmmc-supply = <&vcc_sdhi0>; + vqmmc-supply = <&vccq_sdhi0>; + cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>; + bus-width = <4>; + sd-uhs-sdr50; + sd-uhs-sdr104; + status = "okay"; +}; diff --git a/dts/src/arm64/renesas/r8a774c0-ek874.dts b/dts/src/arm64/renesas/r8a774c0-ek874.dts new file mode 100644 index 0000000000..e7b6619ab2 --- /dev/null +++ b/dts/src/arm64/renesas/r8a774c0-ek874.dts @@ -0,0 +1,14 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the Silicon Linux RZ/G2E evaluation kit (EK874) + * + * Copyright (C) 2019 Renesas Electronics Corp. + */ + +#include "r8a774c0-cat874.dts" +#include "cat875.dtsi" + +/ { + model = "Silicon Linux RZ/G2E evaluation kit EK874 (CAT874 + CAT875)"; + compatible = "si-linux,cat875", "si-linux,cat874", "renesas,r8a774c0"; +}; diff --git a/dts/src/arm64/renesas/r8a774c0.dtsi b/dts/src/arm64/renesas/r8a774c0.dtsi new file mode 100644 index 0000000000..1ea684af99 --- /dev/null +++ b/dts/src/arm64/renesas/r8a774c0.dtsi @@ -0,0 +1,1910 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the RZ/G2E (R8A774C0) SoC + * + * Copyright (C) 2018-2019 Renesas Electronics Corp. + */ + +#include <dt-bindings/clock/r8a774c0-cpg-mssr.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/power/r8a774c0-sysc.h> + +/ { + compatible = "renesas,r8a774c0"; + #address-cells = <2>; + #size-cells = <2>; + + /* + * The external audio clocks are configured as 0 Hz fixed frequency + * clocks by default. + * Boards that provide audio clocks should override them. + */ + audio_clk_a: audio_clk_a { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + audio_clk_b: audio_clk_b { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + audio_clk_c: audio_clk_c { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + /* External CAN clock - to be overridden by boards that provide it */ + can_clk: can { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + cluster1_opp: opp_table10 { + compatible = "operating-points-v2"; + opp-shared; + opp-800000000 { + opp-hz = /bits/ 64 <800000000>; + opp-microvolt = <820000>; + clock-latency-ns = <300000>; + }; + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <820000>; + clock-latency-ns = <300000>; + }; + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <820000>; + clock-latency-ns = <300000>; + opp-suspend; + }; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + a53_0: cpu@0 { + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0>; + device_type = "cpu"; + power-domains = <&sysc R8A774C0_PD_CA53_CPU0>; + next-level-cache = <&L2_CA53>; + enable-method = "psci"; + clocks =<&cpg CPG_CORE R8A774C0_CLK_Z2>; + operating-points-v2 = <&cluster1_opp>; + }; + + a53_1: cpu@1 { + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <1>; + device_type = "cpu"; + power-domains = <&sysc R8A774C0_PD_CA53_CPU1>; + next-level-cache = <&L2_CA53>; + enable-method = "psci"; + clocks =<&cpg CPG_CORE R8A774C0_CLK_Z2>; + operating-points-v2 = <&cluster1_opp>; + }; + + L2_CA53: cache-controller-0 { + compatible = "cache"; + power-domains = <&sysc R8A774C0_PD_CA53_SCU>; + cache-unified; + cache-level = <2>; + }; + }; + + extal_clk: extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board */ + clock-frequency = <0>; + }; + + /* External PCIe clock - can be overridden by the board */ + pcie_bus_clk: pcie_bus { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + pmu_a53 { + compatible = "arm,cortex-a53-pmu"; + interrupts-extended = <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&a53_0>, <&a53_1>; + }; + + psci { + compatible = "arm,psci-1.0", "arm,psci-0.2"; + method = "smc"; + }; + + /* External SCIF clock - to be overridden by boards that provide it */ + scif_clk: scif { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + soc: soc { + compatible = "simple-bus"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + rwdt: watchdog@e6020000 { + compatible = "renesas,r8a774c0-wdt", + "renesas,rcar-gen3-wdt"; + reg = <0 0xe6020000 0 0x0c>; + clocks = <&cpg CPG_MOD 402>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 402>; + status = "disabled"; + }; + + gpio0: gpio@e6050000 { + compatible = "renesas,gpio-r8a774c0", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6050000 0 0x50>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 0 18>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 912>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 912>; + }; + + gpio1: gpio@e6051000 { + compatible = "renesas,gpio-r8a774c0", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6051000 0 0x50>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 32 23>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 911>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 911>; + }; + + gpio2: gpio@e6052000 { + compatible = "renesas,gpio-r8a774c0", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6052000 0 0x50>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 64 26>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 910>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 910>; + }; + + gpio3: gpio@e6053000 { + compatible = "renesas,gpio-r8a774c0", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6053000 0 0x50>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 96 16>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 909>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 909>; + }; + + gpio4: gpio@e6054000 { + compatible = "renesas,gpio-r8a774c0", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6054000 0 0x50>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 128 11>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 908>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 908>; + }; + + gpio5: gpio@e6055000 { + compatible = "renesas,gpio-r8a774c0", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6055000 0 0x50>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 160 20>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 907>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 907>; + }; + + gpio6: gpio@e6055400 { + compatible = "renesas,gpio-r8a774c0", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6055400 0 0x50>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 192 18>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 906>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 906>; + }; + + pfc: pin-controller@e6060000 { + compatible = "renesas,pfc-r8a774c0"; + reg = <0 0xe6060000 0 0x508>; + }; + + cmt0: timer@e60f0000 { + compatible = "renesas,r8a774c0-cmt0", + "renesas,rcar-gen3-cmt0"; + reg = <0 0xe60f0000 0 0x1004>; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 303>; + clock-names = "fck"; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 303>; + status = "disabled"; + }; + + cmt1: timer@e6130000 { + compatible = "renesas,r8a774c0-cmt1", + "renesas,rcar-gen3-cmt1"; + reg = <0 0xe6130000 0 0x1004>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 302>; + clock-names = "fck"; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 302>; + status = "disabled"; + }; + + cmt2: timer@e6140000 { + compatible = "renesas,r8a774c0-cmt1", + "renesas,rcar-gen3-cmt1"; + reg = <0 0xe6140000 0 0x1004>; + interrupts = <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 301>; + clock-names = "fck"; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 301>; + status = "disabled"; + }; + + cmt3: timer@e6148000 { + compatible = "renesas,r8a774c0-cmt1", + "renesas,rcar-gen3-cmt1"; + reg = <0 0xe6148000 0 0x1004>; + interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 300>; + clock-names = "fck"; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 300>; + status = "disabled"; + }; + + cpg: clock-controller@e6150000 { + compatible = "renesas,r8a774c0-cpg-mssr"; + reg = <0 0xe6150000 0 0x1000>; + clocks = <&extal_clk>; + clock-names = "extal"; + #clock-cells = <2>; + #power-domain-cells = <0>; + #reset-cells = <1>; + }; + + rst: reset-controller@e6160000 { + compatible = "renesas,r8a774c0-rst"; + reg = <0 0xe6160000 0 0x0200>; + }; + + sysc: system-controller@e6180000 { + compatible = "renesas,r8a774c0-sysc"; + reg = <0 0xe6180000 0 0x0400>; + #power-domain-cells = <1>; + }; + + thermal: thermal@e6190000 { + compatible = "renesas,thermal-r8a774c0"; + reg = <0 0xe6190000 0 0x10>, <0 0xe6190100 0 0x38>; + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 522>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 522>; + #thermal-sensor-cells = <0>; + }; + + intc_ex: interrupt-controller@e61c0000 { + compatible = "renesas,intc-ex-r8a774c0", "renesas,irqc"; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0 0xe61c0000 0 0x200>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 407>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 407>; + }; + + tmu0: timer@e61e0000 { + compatible = "renesas,tmu-r8a774c0", "renesas,tmu"; + reg = <0 0xe61e0000 0 0x30>; + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 125>; + clock-names = "fck"; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 125>; + status = "disabled"; + }; + + tmu1: timer@e6fc0000 { + compatible = "renesas,tmu-r8a774c0", "renesas,tmu"; + reg = <0 0xe6fc0000 0 0x30>; + interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 124>; + clock-names = "fck"; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 124>; + status = "disabled"; + }; + + tmu2: timer@e6fd0000 { + compatible = "renesas,tmu-r8a774c0", "renesas,tmu"; + reg = <0 0xe6fd0000 0 0x30>; + interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 123>; + clock-names = "fck"; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 123>; + status = "disabled"; + }; + + tmu3: timer@e6fe0000 { + compatible = "renesas,tmu-r8a774c0", "renesas,tmu"; + reg = <0 0xe6fe0000 0 0x30>; + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 122>; + clock-names = "fck"; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 122>; + status = "disabled"; + }; + + tmu4: timer@ffc00000 { + compatible = "renesas,tmu-r8a774c0", "renesas,tmu"; + reg = <0 0xffc00000 0 0x30>; + interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 121>; + clock-names = "fck"; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 121>; + status = "disabled"; + }; + + i2c0: i2c@e6500000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a774c0", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe6500000 0 0x40>; + interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 931>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 931>; + dmas = <&dmac1 0x91>, <&dmac1 0x90>, + <&dmac2 0x91>, <&dmac2 0x90>; + dma-names = "tx", "rx", "tx", "rx"; + i2c-scl-internal-delay-ns = <110>; + status = "disabled"; + }; + + i2c1: i2c@e6508000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a774c0", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe6508000 0 0x40>; + interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 930>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 930>; + dmas = <&dmac1 0x93>, <&dmac1 0x92>, + <&dmac2 0x93>, <&dmac2 0x92>; + dma-names = "tx", "rx", "tx", "rx"; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c2: i2c@e6510000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a774c0", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe6510000 0 0x40>; + interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 929>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 929>; + dmas = <&dmac1 0x95>, <&dmac1 0x94>, + <&dmac2 0x95>, <&dmac2 0x94>; + dma-names = "tx", "rx", "tx", "rx"; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c3: i2c@e66d0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a774c0", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe66d0000 0 0x40>; + interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 928>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 928>; + dmas = <&dmac0 0x97>, <&dmac0 0x96>; + dma-names = "tx", "rx"; + i2c-scl-internal-delay-ns = <110>; + status = "disabled"; + }; + + i2c4: i2c@e66d8000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a774c0", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe66d8000 0 0x40>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 927>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 927>; + dmas = <&dmac0 0x99>, <&dmac0 0x98>; + dma-names = "tx", "rx"; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c5: i2c@e66e0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a774c0", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe66e0000 0 0x40>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 919>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 919>; + dmas = <&dmac0 0x9b>, <&dmac0 0x9a>; + dma-names = "tx", "rx"; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c6: i2c@e66e8000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a774c0", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe66e8000 0 0x40>; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 918>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 918>; + dmas = <&dmac0 0x9d>, <&dmac0 0x9c>; + dma-names = "tx", "rx"; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c7: i2c@e6690000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a774c0", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe6690000 0 0x40>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 1003>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 1003>; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c_dvfs: i2c@e60b0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-r8a774c0"; + reg = <0 0xe60b0000 0 0x15>; + interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 926>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 926>; + dmas = <&dmac0 0x11>, <&dmac0 0x10>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + hscif0: serial@e6540000 { + compatible = "renesas,hscif-r8a774c0", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe6540000 0 0x60>; + interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 520>, + <&cpg CPG_CORE R8A774C0_CLK_S3D1C>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x31>, <&dmac1 0x30>, + <&dmac2 0x31>, <&dmac2 0x30>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 520>; + status = "disabled"; + }; + + hscif1: serial@e6550000 { + compatible = "renesas,hscif-r8a774c0", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe6550000 0 0x60>; + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 519>, + <&cpg CPG_CORE R8A774C0_CLK_S3D1C>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x33>, <&dmac1 0x32>, + <&dmac2 0x33>, <&dmac2 0x32>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 519>; + status = "disabled"; + }; + + hscif2: serial@e6560000 { + compatible = "renesas,hscif-r8a774c0", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe6560000 0 0x60>; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 518>, + <&cpg CPG_CORE R8A774C0_CLK_S3D1C>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x35>, <&dmac1 0x34>, + <&dmac2 0x35>, <&dmac2 0x34>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 518>; + status = "disabled"; + }; + + hscif3: serial@e66a0000 { + compatible = "renesas,hscif-r8a774c0", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe66a0000 0 0x60>; + interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 517>, + <&cpg CPG_CORE R8A774C0_CLK_S3D1C>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x37>, <&dmac0 0x36>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 517>; + status = "disabled"; + }; + + hscif4: serial@e66b0000 { + compatible = "renesas,hscif-r8a774c0", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe66b0000 0 0x60>; + interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 516>, + <&cpg CPG_CORE R8A774C0_CLK_S3D1C>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x39>, <&dmac0 0x38>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 516>; + status = "disabled"; + }; + + hsusb: usb@e6590000 { + compatible = "renesas,usbhs-r8a774c0", + "renesas,rcar-gen3-usbhs"; + reg = <0 0xe6590000 0 0x200>; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 704>, <&cpg CPG_MOD 703>; + dmas = <&usb_dmac0 0>, <&usb_dmac0 1>, + <&usb_dmac1 0>, <&usb_dmac1 1>; + dma-names = "ch0", "ch1", "ch2", "ch3"; + renesas,buswait = <11>; + phys = <&usb2_phy0>; + phy-names = "usb"; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 704>, <&cpg 703>; + status = "disabled"; + }; + + usb_dmac0: dma-controller@e65a0000 { + compatible = "renesas,r8a774c0-usb-dmac", + "renesas,usb-dmac"; + reg = <0 0xe65a0000 0 0x100>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1"; + clocks = <&cpg CPG_MOD 330>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 330>; + #dma-cells = <1>; + dma-channels = <2>; + }; + + usb_dmac1: dma-controller@e65b0000 { + compatible = "renesas,r8a774c0-usb-dmac", + "renesas,usb-dmac"; + reg = <0 0xe65b0000 0 0x100>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1"; + clocks = <&cpg CPG_MOD 331>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 331>; + #dma-cells = <1>; + dma-channels = <2>; + }; + + dmac0: dma-controller@e6700000 { + compatible = "renesas,dmac-r8a774c0", + "renesas,rcar-dmac"; + reg = <0 0xe6700000 0 0x10000>; + interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 219>; + clock-names = "fck"; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 219>; + #dma-cells = <1>; + dma-channels = <16>; + iommus = <&ipmmu_ds0 0>, <&ipmmu_ds0 1>, + <&ipmmu_ds0 2>, <&ipmmu_ds0 3>, + <&ipmmu_ds0 4>, <&ipmmu_ds0 5>, + <&ipmmu_ds0 6>, <&ipmmu_ds0 7>, + <&ipmmu_ds0 8>, <&ipmmu_ds0 9>, + <&ipmmu_ds0 10>, <&ipmmu_ds0 11>, + <&ipmmu_ds0 12>, <&ipmmu_ds0 13>, + <&ipmmu_ds0 14>, <&ipmmu_ds0 15>; + }; + + dmac1: dma-controller@e7300000 { + compatible = "renesas,dmac-r8a774c0", + "renesas,rcar-dmac"; + reg = <0 0xe7300000 0 0x10000>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 218>; + clock-names = "fck"; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 218>; + #dma-cells = <1>; + dma-channels = <16>; + iommus = <&ipmmu_ds1 0>, <&ipmmu_ds1 1>, + <&ipmmu_ds1 2>, <&ipmmu_ds1 3>, + <&ipmmu_ds1 4>, <&ipmmu_ds1 5>, + <&ipmmu_ds1 6>, <&ipmmu_ds1 7>, + <&ipmmu_ds1 8>, <&ipmmu_ds1 9>, + <&ipmmu_ds1 10>, <&ipmmu_ds1 11>, + <&ipmmu_ds1 12>, <&ipmmu_ds1 13>, + <&ipmmu_ds1 14>, <&ipmmu_ds1 15>; + }; + + dmac2: dma-controller@e7310000 { + compatible = "renesas,dmac-r8a774c0", + "renesas,rcar-dmac"; + reg = <0 0xe7310000 0 0x10000>; + interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 217>; + clock-names = "fck"; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 217>; + #dma-cells = <1>; + dma-channels = <16>; + iommus = <&ipmmu_ds1 16>, <&ipmmu_ds1 17>, + <&ipmmu_ds1 18>, <&ipmmu_ds1 19>, + <&ipmmu_ds1 20>, <&ipmmu_ds1 21>, + <&ipmmu_ds1 22>, <&ipmmu_ds1 23>, + <&ipmmu_ds1 24>, <&ipmmu_ds1 25>, + <&ipmmu_ds1 26>, <&ipmmu_ds1 27>, + <&ipmmu_ds1 28>, <&ipmmu_ds1 29>, + <&ipmmu_ds1 30>, <&ipmmu_ds1 31>; + }; + + ipmmu_ds0: mmu@e6740000 { + compatible = "renesas,ipmmu-r8a774c0"; + reg = <0 0xe6740000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 0>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_ds1: mmu@e7740000 { + compatible = "renesas,ipmmu-r8a774c0"; + reg = <0 0xe7740000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 1>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_hc: mmu@e6570000 { + compatible = "renesas,ipmmu-r8a774c0"; + reg = <0 0xe6570000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 2>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_mm: mmu@e67b0000 { + compatible = "renesas,ipmmu-r8a774c0"; + reg = <0 0xe67b0000 0 0x1000>; + interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_mp: mmu@ec670000 { + compatible = "renesas,ipmmu-r8a774c0"; + reg = <0 0xec670000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 4>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_pv0: mmu@fd800000 { + compatible = "renesas,ipmmu-r8a774c0"; + reg = <0 0xfd800000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 6>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_vc0: mmu@fe6b0000 { + compatible = "renesas,ipmmu-r8a774c0"; + reg = <0 0xfe6b0000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 12>; + power-domains = <&sysc R8A774C0_PD_A3VC>; + #iommu-cells = <1>; + }; + + ipmmu_vi0: mmu@febd0000 { + compatible = "renesas,ipmmu-r8a774c0"; + reg = <0 0xfebd0000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 14>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_vp0: mmu@fe990000 { + compatible = "renesas,ipmmu-r8a774c0"; + reg = <0 0xfe990000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 16>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + avb: ethernet@e6800000 { + compatible = "renesas,etheravb-r8a774c0", + "renesas,etheravb-rcar-gen3"; + reg = <0 0xe6800000 0 0x800>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15", + "ch16", "ch17", "ch18", "ch19", + "ch20", "ch21", "ch22", "ch23", + "ch24"; + clocks = <&cpg CPG_MOD 812>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 812>; + phy-mode = "rgmii"; + iommus = <&ipmmu_ds0 16>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + can0: can@e6c30000 { + compatible = "renesas,can-r8a774c0", + "renesas,rcar-gen3-can"; + reg = <0 0xe6c30000 0 0x1000>; + interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 916>, <&can_clk>; + clock-names = "clkp1", "can_clk"; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 916>; + status = "disabled"; + }; + + can1: can@e6c38000 { + compatible = "renesas,can-r8a774c0", + "renesas,rcar-gen3-can"; + reg = <0 0xe6c38000 0 0x1000>; + interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 915>, <&can_clk>; + clock-names = "clkp1", "can_clk"; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 915>; + status = "disabled"; + }; + + pwm0: pwm@e6e30000 { + compatible = "renesas,pwm-r8a774c0", "renesas,pwm-rcar"; + reg = <0 0xe6e30000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm1: pwm@e6e31000 { + compatible = "renesas,pwm-r8a774c0", "renesas,pwm-rcar"; + reg = <0 0xe6e31000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm2: pwm@e6e32000 { + compatible = "renesas,pwm-r8a774c0", "renesas,pwm-rcar"; + reg = <0 0xe6e32000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm3: pwm@e6e33000 { + compatible = "renesas,pwm-r8a774c0", "renesas,pwm-rcar"; + reg = <0 0xe6e33000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm4: pwm@e6e34000 { + compatible = "renesas,pwm-r8a774c0", "renesas,pwm-rcar"; + reg = <0 0xe6e34000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm5: pwm@e6e35000 { + compatible = "renesas,pwm-r8a774c0", "renesas,pwm-rcar"; + reg = <0 0xe6e35000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm6: pwm@e6e36000 { + compatible = "renesas,pwm-r8a774c0", "renesas,pwm-rcar"; + reg = <0 0xe6e36000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + scif0: serial@e6e60000 { + compatible = "renesas,scif-r8a774c0", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6e60000 0 64>; + interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 207>, + <&cpg CPG_CORE R8A774C0_CLK_S3D1C>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x51>, <&dmac1 0x50>, + <&dmac2 0x51>, <&dmac2 0x50>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 207>; + status = "disabled"; + }; + + scif1: serial@e6e68000 { + compatible = "renesas,scif-r8a774c0", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6e68000 0 64>; + interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 206>, + <&cpg CPG_CORE R8A774C0_CLK_S3D1C>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x53>, <&dmac1 0x52>, + <&dmac2 0x53>, <&dmac2 0x52>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 206>; + status = "disabled"; + }; + + scif2: serial@e6e88000 { + compatible = "renesas,scif-r8a774c0", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6e88000 0 64>; + interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 310>, + <&cpg CPG_CORE R8A774C0_CLK_S3D1C>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x13>, <&dmac1 0x12>, + <&dmac2 0x13>, <&dmac2 0x12>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 310>; + status = "disabled"; + }; + + scif3: serial@e6c50000 { + compatible = "renesas,scif-r8a774c0", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6c50000 0 64>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 204>, + <&cpg CPG_CORE R8A774C0_CLK_S3D1C>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x57>, <&dmac0 0x56>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 204>; + status = "disabled"; + }; + + scif4: serial@e6c40000 { + compatible = "renesas,scif-r8a774c0", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6c40000 0 64>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 203>, + <&cpg CPG_CORE R8A774C0_CLK_S3D1C>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x59>, <&dmac0 0x58>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 203>; + status = "disabled"; + }; + + scif5: serial@e6f30000 { + compatible = "renesas,scif-r8a774c0", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6f30000 0 64>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 202>, + <&cpg CPG_CORE R8A774C0_CLK_S3D1C>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x5b>, <&dmac0 0x5a>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 202>; + status = "disabled"; + }; + + msiof0: spi@e6e90000 { + compatible = "renesas,msiof-r8a774c0", + "renesas,rcar-gen3-msiof"; + reg = <0 0xe6e90000 0 0x0064>; + interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 211>; + dmas = <&dmac1 0x41>, <&dmac1 0x40>, + <&dmac2 0x41>, <&dmac2 0x40>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 211>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + msiof1: spi@e6ea0000 { + compatible = "renesas,msiof-r8a774c0", + "renesas,rcar-gen3-msiof"; + reg = <0 0xe6ea0000 0 0x0064>; + interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 210>; + dmas = <&dmac1 0x43>, <&dmac1 0x42>, + <&dmac2 0x43>, <&dmac2 0x42>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 210>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + msiof2: spi@e6c00000 { + compatible = "renesas,msiof-r8a774c0", + "renesas,rcar-gen3-msiof"; + reg = <0 0xe6c00000 0 0x0064>; + interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 209>; + dmas = <&dmac0 0x45>, <&dmac0 0x44>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 209>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + msiof3: spi@e6c10000 { + compatible = "renesas,msiof-r8a774c0", + "renesas,rcar-gen3-msiof"; + reg = <0 0xe6c10000 0 0x0064>; + interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 208>; + dmas = <&dmac0 0x47>, <&dmac0 0x46>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 208>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + vin4: video@e6ef4000 { + compatible = "renesas,vin-r8a774c0"; + reg = <0 0xe6ef4000 0 0x1000>; + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 807>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 807>; + renesas,id = <4>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin4csi40: endpoint@2 { + reg = <2>; + remote-endpoint= <&csi40vin4>; + }; + }; + }; + }; + + vin5: video@e6ef5000 { + compatible = "renesas,vin-r8a774c0"; + reg = <0 0xe6ef5000 0 0x1000>; + interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 806>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 806>; + renesas,id = <5>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin5csi40: endpoint@2 { + reg = <2>; + remote-endpoint= <&csi40vin5>; + }; + }; + }; + }; + + rcar_sound: sound@ec500000 { + /* + * #sound-dai-cells is required + * + * Single DAI : #sound-dai-cells = <0>; <&rcar_sound>; + * Multi DAI : #sound-dai-cells = <1>; <&rcar_sound N>; + */ + /* + * #clock-cells is required for audio_clkout0/1/2/3 + * + * clkout : #clock-cells = <0>; <&rcar_sound>; + * clkout0/1/2/3: #clock-cells = <1>; <&rcar_sound N>; + */ + compatible = "renesas,rcar_sound-r8a774c0", + "renesas,rcar_sound-gen3"; + reg = <0 0xec500000 0 0x1000>, /* SCU */ + <0 0xec5a0000 0 0x100>, /* ADG */ + <0 0xec540000 0 0x1000>, /* SSIU */ + <0 0xec541000 0 0x280>, /* SSI */ + <0 0xec760000 0 0x200>; /* Audio DMAC peri peri*/ + reg-names = "scu", "adg", "ssiu", "ssi", "audmapp"; + + clocks = <&cpg CPG_MOD 1005>, + <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>, + <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>, + <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>, + <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>, + <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>, + <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>, + <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>, + <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>, + <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>, + <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>, + <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, + <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, + <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, + <&audio_clk_a>, <&audio_clk_b>, + <&audio_clk_c>, + <&cpg CPG_CORE R8A774C0_CLK_ZA2>; + clock-names = "ssi-all", + "ssi.9", "ssi.8", "ssi.7", "ssi.6", + "ssi.5", "ssi.4", "ssi.3", "ssi.2", + "ssi.1", "ssi.0", + "src.9", "src.8", "src.7", "src.6", + "src.5", "src.4", "src.3", "src.2", + "src.1", "src.0", + "mix.1", "mix.0", + "ctu.1", "ctu.0", + "dvc.0", "dvc.1", + "clk_a", "clk_b", "clk_c", "clk_i"; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 1005>, + <&cpg 1006>, <&cpg 1007>, + <&cpg 1008>, <&cpg 1009>, + <&cpg 1010>, <&cpg 1011>, + <&cpg 1012>, <&cpg 1013>, + <&cpg 1014>, <&cpg 1015>; + reset-names = "ssi-all", + "ssi.9", "ssi.8", "ssi.7", "ssi.6", + "ssi.5", "ssi.4", "ssi.3", "ssi.2", + "ssi.1", "ssi.0"; + status = "disabled"; + + rcar_sound,dvc { + dvc0: dvc-0 { + dmas = <&audma0 0xbc>; + dma-names = "tx"; + }; + dvc1: dvc-1 { + dmas = <&audma0 0xbe>; + dma-names = "tx"; + }; + }; + + rcar_sound,mix { + mix0: mix-0 { }; + mix1: mix-1 { }; + }; + + rcar_sound,ctu { + ctu00: ctu-0 { }; + ctu01: ctu-1 { }; + ctu02: ctu-2 { }; + ctu03: ctu-3 { }; + ctu10: ctu-4 { }; + ctu11: ctu-5 { }; + ctu12: ctu-6 { }; + ctu13: ctu-7 { }; + }; + + rcar_sound,src { + src0: src-0 { + interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x85>, <&audma0 0x9a>; + dma-names = "rx", "tx"; + }; + src1: src-1 { + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x87>, <&audma0 0x9c>; + dma-names = "rx", "tx"; + }; + src2: src-2 { + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x89>, <&audma0 0x9e>; + dma-names = "rx", "tx"; + }; + src3: src-3 { + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x8b>, <&audma0 0xa0>; + dma-names = "rx", "tx"; + }; + src4: src-4 { + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x8d>, <&audma0 0xb0>; + dma-names = "rx", "tx"; + }; + src5: src-5 { + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x8f>, <&audma0 0xb2>; + dma-names = "rx", "tx"; + }; + src6: src-6 { + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x91>, <&audma0 0xb4>; + dma-names = "rx", "tx"; + }; + src7: src-7 { + interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x93>, <&audma0 0xb6>; + dma-names = "rx", "tx"; + }; + src8: src-8 { + interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x95>, <&audma0 0xb8>; + dma-names = "rx", "tx"; + }; + src9: src-9 { + interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x97>, <&audma0 0xba>; + dma-names = "rx", "tx"; + }; + }; + + rcar_sound,ssi { + ssi0: ssi-0 { + interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x01>, <&audma0 0x02>, + <&audma0 0x15>, <&audma0 0x16>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi1: ssi-1 { + interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x03>, <&audma0 0x04>, + <&audma0 0x49>, <&audma0 0x4a>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi2: ssi-2 { + interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x05>, <&audma0 0x06>, + <&audma0 0x63>, <&audma0 0x64>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi3: ssi-3 { + interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x07>, <&audma0 0x08>, + <&audma0 0x6f>, <&audma0 0x70>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi4: ssi-4 { + interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x09>, <&audma0 0x0a>, + <&audma0 0x71>, <&audma0 0x72>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi5: ssi-5 { + interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0b>, <&audma0 0x0c>, + <&audma0 0x73>, <&audma0 0x74>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi6: ssi-6 { + interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0d>, <&audma0 0x0e>, + <&audma0 0x75>, <&audma0 0x76>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi7: ssi-7 { + interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0f>, <&audma0 0x10>, + <&audma0 0x79>, <&audma0 0x7a>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi8: ssi-8 { + interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x11>, <&audma0 0x12>, + <&audma0 0x7b>, <&audma0 0x7c>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi9: ssi-9 { + interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x13>, <&audma0 0x14>, + <&audma0 0x7d>, <&audma0 0x7e>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + }; + }; + + audma0: dma-controller@ec700000 { + compatible = "renesas,dmac-r8a774c0", + "renesas,rcar-dmac"; + reg = <0 0xec700000 0 0x10000>; + interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 502>; + clock-names = "fck"; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 502>; + #dma-cells = <1>; + dma-channels = <16>; + iommus = <&ipmmu_mp 0>, <&ipmmu_mp 1>, + <&ipmmu_mp 2>, <&ipmmu_mp 3>, + <&ipmmu_mp 4>, <&ipmmu_mp 5>, + <&ipmmu_mp 6>, <&ipmmu_mp 7>, + <&ipmmu_mp 8>, <&ipmmu_mp 9>, + <&ipmmu_mp 10>, <&ipmmu_mp 11>, + <&ipmmu_mp 12>, <&ipmmu_mp 13>, + <&ipmmu_mp 14>, <&ipmmu_mp 15>; + }; + + xhci0: usb@ee000000 { + compatible = "renesas,xhci-r8a774c0", + "renesas,rcar-gen3-xhci"; + reg = <0 0xee000000 0 0xc00>; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 328>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 328>; + status = "disabled"; + }; + + usb3_peri0: usb@ee020000 { + compatible = "renesas,r8a774c0-usb3-peri", + "renesas,rcar-gen3-usb3-peri"; + reg = <0 0xee020000 0 0x400>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 328>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 328>; + status = "disabled"; + }; + + ohci0: usb@ee080000 { + compatible = "generic-ohci"; + reg = <0 0xee080000 0 0x100>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; + phys = <&usb2_phy0>; + phy-names = "usb"; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 703>, <&cpg 704>; + status = "disabled"; + }; + + ehci0: usb@ee080100 { + compatible = "generic-ehci"; + reg = <0 0xee080100 0 0x100>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; + phys = <&usb2_phy0>; + phy-names = "usb"; + companion = <&ohci0>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 703>, <&cpg 704>; + status = "disabled"; + }; + + usb2_phy0: usb-phy@ee080200 { + compatible = "renesas,usb2-phy-r8a774c0", + "renesas,rcar-gen3-usb2-phy"; + reg = <0 0xee080200 0 0x700>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 703>, <&cpg 704>; + #phy-cells = <0>; + status = "disabled"; + }; + + sdhi0: sd@ee100000 { + compatible = "renesas,sdhi-r8a774c0", + "renesas,rcar-gen3-sdhi"; + reg = <0 0xee100000 0 0x2000>; + interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 314>; + max-frequency = <200000000>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 314>; + status = "disabled"; + }; + + sdhi1: sd@ee120000 { + compatible = "renesas,sdhi-r8a774c0", + "renesas,rcar-gen3-sdhi"; + reg = <0 0xee120000 0 0x2000>; + interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 313>; + max-frequency = <200000000>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 313>; + status = "disabled"; + }; + + sdhi3: sd@ee160000 { + compatible = "renesas,sdhi-r8a774c0", + "renesas,rcar-gen3-sdhi"; + reg = <0 0xee160000 0 0x2000>; + interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 311>; + max-frequency = <200000000>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 311>; + status = "disabled"; + }; + + gic: interrupt-controller@f1010000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x0 0xf1010000 0 0x1000>, + <0x0 0xf1020000 0 0x20000>, + <0x0 0xf1040000 0 0x20000>, + <0x0 0xf1060000 0 0x20000>; + interrupts = <GIC_PPI 9 + (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; + clocks = <&cpg CPG_MOD 408>; + clock-names = "clk"; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 408>; + }; + + pciec0: pcie@fe000000 { + compatible = "renesas,pcie-r8a774c0", + "renesas,pcie-rcar-gen3"; + reg = <0 0xfe000000 0 0x80000>; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x00 0xff>; + device_type = "pci"; + ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000 + 0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000 + 0x02000000 0 0x30000000 0 0x30000000 0 0x08000000 + 0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>; + /* Map all possible DDR as inbound ranges */ + dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x40000000>; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>; + clock-names = "pcie", "pcie_bus"; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 319>; + status = "disabled"; + }; + + vspb0: vsp@fe960000 { + compatible = "renesas,vsp2"; + reg = <0 0xfe960000 0 0x8000>; + interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 626>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 626>; + renesas,fcp = <&fcpvb0>; + }; + + fcpvb0: fcp@fe96f000 { + compatible = "renesas,fcpv"; + reg = <0 0xfe96f000 0 0x200>; + clocks = <&cpg CPG_MOD 607>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 607>; + iommus = <&ipmmu_vp0 5>; + }; + + vspi0: vsp@fe9a0000 { + compatible = "renesas,vsp2"; + reg = <0 0xfe9a0000 0 0x8000>; + interrupts = <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 631>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 631>; + renesas,fcp = <&fcpvi0>; + }; + + fcpvi0: fcp@fe9af000 { + compatible = "renesas,fcpv"; + reg = <0 0xfe9af000 0 0x200>; + clocks = <&cpg CPG_MOD 611>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 611>; + iommus = <&ipmmu_vp0 8>; + }; + + vspd0: vsp@fea20000 { + compatible = "renesas,vsp2"; + reg = <0 0xfea20000 0 0x7000>; + interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 623>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 623>; + renesas,fcp = <&fcpvd0>; + }; + + fcpvd0: fcp@fea27000 { + compatible = "renesas,fcpv"; + reg = <0 0xfea27000 0 0x200>; + clocks = <&cpg CPG_MOD 603>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 603>; + iommus = <&ipmmu_vi0 8>; + }; + + vspd1: vsp@fea28000 { + compatible = "renesas,vsp2"; + reg = <0 0xfea28000 0 0x7000>; + interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 622>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 622>; + renesas,fcp = <&fcpvd1>; + }; + + fcpvd1: fcp@fea2f000 { + compatible = "renesas,fcpv"; + reg = <0 0xfea2f000 0 0x200>; + clocks = <&cpg CPG_MOD 602>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 602>; + iommus = <&ipmmu_vi0 9>; + }; + + csi40: csi2@feaa0000 { + compatible = "renesas,r8a774c0-csi2", + "renesas,rcar-gen3-csi2"; + reg = <0 0xfeaa0000 0 0x10000>; + interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 716>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 716>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + csi40vin4: endpoint@0 { + reg = <0>; + remote-endpoint = <&vin4csi40>; + }; + csi40vin5: endpoint@1 { + reg = <1>; + remote-endpoint = <&vin5csi40>; + }; + }; + }; + }; + + du: display@feb00000 { + compatible = "renesas,du-r8a774c0"; + reg = <0 0xfeb00000 0 0x80000>; + interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>; + clock-names = "du.0", "du.1"; + vsps = <&vspd0 0 &vspd1 0>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + du_out_rgb: endpoint { + }; + }; + + port@1 { + reg = <1>; + du_out_lvds0: endpoint { + remote-endpoint = <&lvds0_in>; + }; + }; + + port@2 { + reg = <2>; + du_out_lvds1: endpoint { + remote-endpoint = <&lvds1_in>; + }; + }; + }; + }; + + lvds0: lvds-encoder@feb90000 { + compatible = "renesas,r8a774c0-lvds"; + reg = <0 0xfeb90000 0 0x20>; + clocks = <&cpg CPG_MOD 727>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 727>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + lvds0_in: endpoint { + remote-endpoint = <&du_out_lvds0>; + }; + }; + + port@1 { + reg = <1>; + lvds0_out: endpoint { + }; + }; + }; + }; + + lvds1: lvds-encoder@feb90100 { + compatible = "renesas,r8a774c0-lvds"; + reg = <0 0xfeb90100 0 0x20>; + clocks = <&cpg CPG_MOD 727>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 726>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + lvds1_in: endpoint { + remote-endpoint = <&du_out_lvds1>; + }; + }; + + port@1 { + reg = <1>; + lvds1_out: endpoint { + }; + }; + }; + }; + + prr: chipid@fff00044 { + compatible = "renesas,prr"; + reg = <0 0xfff00044 0 4>; + }; + }; + + thermal-zones { + cpu-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&thermal>; + + trips { + cpu-crit { + temperature = <120000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + }; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + }; + + /* External USB clocks - can be overridden by the board */ + usb3s0_clk: usb3s0 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + usb_extal_clk: usb_extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; +}; diff --git a/dts/src/arm64/renesas/r8a7795.dtsi b/dts/src/arm64/renesas/r8a7795.dtsi index af9605d5db..abeac30593 100644 --- a/dts/src/arm64/renesas/r8a7795.dtsi +++ b/dts/src/arm64/renesas/r8a7795.dtsi @@ -149,7 +149,7 @@ }; a57_0: cpu@0 { - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0x0>; device_type = "cpu"; power-domains = <&sysc R8A7795_PD_CA57_CPU0>; @@ -162,7 +162,7 @@ }; a57_1: cpu@1 { - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0x1>; device_type = "cpu"; power-domains = <&sysc R8A7795_PD_CA57_CPU1>; @@ -175,7 +175,7 @@ }; a57_2: cpu@2 { - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0x2>; device_type = "cpu"; power-domains = <&sysc R8A7795_PD_CA57_CPU2>; @@ -188,7 +188,7 @@ }; a57_3: cpu@3 { - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0x3>; device_type = "cpu"; power-domains = <&sysc R8A7795_PD_CA57_CPU3>; @@ -201,7 +201,7 @@ }; a53_0: cpu@100 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x100>; device_type = "cpu"; power-domains = <&sysc R8A7795_PD_CA53_CPU0>; @@ -213,7 +213,7 @@ }; a53_1: cpu@101 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x101>; device_type = "cpu"; power-domains = <&sysc R8A7795_PD_CA53_CPU1>; @@ -225,7 +225,7 @@ }; a53_2: cpu@102 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x102>; device_type = "cpu"; power-domains = <&sysc R8A7795_PD_CA53_CPU2>; @@ -237,7 +237,7 @@ }; a53_3: cpu@103 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x103>; device_type = "cpu"; power-domains = <&sysc R8A7795_PD_CA53_CPU3>; @@ -2174,53 +2174,53 @@ rcar_sound,ssi { ssi0: ssi-0 { interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>; - dma-names = "rx", "tx", "rxu", "txu"; + dmas = <&audma0 0x01>, <&audma1 0x02>; + dma-names = "rx", "tx"; }; ssi1: ssi-1 { interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x03>, <&audma1 0x04>, <&audma0 0x49>, <&audma1 0x4a>; - dma-names = "rx", "tx", "rxu", "txu"; + dmas = <&audma0 0x03>, <&audma1 0x04>; + dma-names = "rx", "tx"; }; ssi2: ssi-2 { interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x05>, <&audma1 0x06>, <&audma0 0x63>, <&audma1 0x64>; - dma-names = "rx", "tx", "rxu", "txu"; + dmas = <&audma0 0x05>, <&audma1 0x06>; + dma-names = "rx", "tx"; }; ssi3: ssi-3 { interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x07>, <&audma1 0x08>, <&audma0 0x6f>, <&audma1 0x70>; - dma-names = "rx", "tx", "rxu", "txu"; + dmas = <&audma0 0x07>, <&audma1 0x08>; + dma-names = "rx", "tx"; }; ssi4: ssi-4 { interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x09>, <&audma1 0x0a>, <&audma0 0x71>, <&audma1 0x72>; - dma-names = "rx", "tx", "rxu", "txu"; + dmas = <&audma0 0x09>, <&audma1 0x0a>; + dma-names = "rx", "tx"; }; ssi5: ssi-5 { interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x0b>, <&audma1 0x0c>, <&audma0 0x73>, <&audma1 0x74>; - dma-names = "rx", "tx", "rxu", "txu"; + dmas = <&audma0 0x0b>, <&audma1 0x0c>; + dma-names = "rx", "tx"; }; ssi6: ssi-6 { interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x0d>, <&audma1 0x0e>, <&audma0 0x75>, <&audma1 0x76>; - dma-names = "rx", "tx", "rxu", "txu"; + dmas = <&audma0 0x0d>, <&audma1 0x0e>; + dma-names = "rx", "tx"; }; ssi7: ssi-7 { interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x0f>, <&audma1 0x10>, <&audma0 0x79>, <&audma1 0x7a>; - dma-names = "rx", "tx", "rxu", "txu"; + dmas = <&audma0 0x0f>, <&audma1 0x10>; + dma-names = "rx", "tx"; }; ssi8: ssi-8 { interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x11>, <&audma1 0x12>, <&audma0 0x7b>, <&audma1 0x7c>; - dma-names = "rx", "tx", "rxu", "txu"; + dmas = <&audma0 0x11>, <&audma1 0x12>; + dma-names = "rx", "tx"; }; ssi9: ssi-9 { interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x13>, <&audma1 0x14>, <&audma0 0x7d>, <&audma1 0x7e>; - dma-names = "rx", "tx", "rxu", "txu"; + dmas = <&audma0 0x13>, <&audma1 0x14>; + dma-names = "rx", "tx"; }; }; }; diff --git a/dts/src/arm64/renesas/r8a7796-salvator-xs.dts b/dts/src/arm64/renesas/r8a7796-salvator-xs.dts index 8860be6534..31f1205935 100644 --- a/dts/src/arm64/renesas/r8a7796-salvator-xs.dts +++ b/dts/src/arm64/renesas/r8a7796-salvator-xs.dts @@ -29,11 +29,10 @@ clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&cpg CPG_MOD 722>, - <&cpg CPG_MOD 727>, <&versaclock6 1>, <&x21_clk>, <&versaclock6 2>; - clock-names = "du.0", "du.1", "du.2", "lvds.0", + clock-names = "du.0", "du.1", "du.2", "dclkin.0", "dclkin.1", "dclkin.2"; }; diff --git a/dts/src/arm64/renesas/r8a7796.dtsi b/dts/src/arm64/renesas/r8a7796.dtsi index 0648d12778..cdf784899c 100644 --- a/dts/src/arm64/renesas/r8a7796.dtsi +++ b/dts/src/arm64/renesas/r8a7796.dtsi @@ -154,7 +154,7 @@ }; a57_0: cpu@0 { - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0x0>; device_type = "cpu"; power-domains = <&sysc R8A7796_PD_CA57_CPU0>; @@ -167,7 +167,7 @@ }; a57_1: cpu@1 { - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0x1>; device_type = "cpu"; power-domains = <&sysc R8A7796_PD_CA57_CPU1>; @@ -180,7 +180,7 @@ }; a53_0: cpu@100 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x100>; device_type = "cpu"; power-domains = <&sysc R8A7796_PD_CA53_CPU0>; @@ -192,7 +192,7 @@ }; a53_1: cpu@101 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x101>; device_type = "cpu"; power-domains = <&sysc R8A7796_PD_CA53_CPU1>; @@ -204,7 +204,7 @@ }; a53_2: cpu@102 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x102>; device_type = "cpu"; power-domains = <&sysc R8A7796_PD_CA53_CPU2>; @@ -216,7 +216,7 @@ }; a53_3: cpu@103 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x103>; device_type = "cpu"; power-domains = <&sysc R8A7796_PD_CA53_CPU3>; @@ -2113,53 +2113,53 @@ rcar_sound,ssi { ssi0: ssi-0 { interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>; - dma-names = "rx", "tx", "rxu", "txu"; + dmas = <&audma0 0x01>, <&audma1 0x02>; + dma-names = "rx", "tx"; }; ssi1: ssi-1 { interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x03>, <&audma1 0x04>, <&audma0 0x49>, <&audma1 0x4a>; - dma-names = "rx", "tx", "rxu", "txu"; + dmas = <&audma0 0x03>, <&audma1 0x04>; + dma-names = "rx", "tx"; }; ssi2: ssi-2 { interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x05>, <&audma1 0x06>, <&audma0 0x63>, <&audma1 0x64>; - dma-names = "rx", "tx", "rxu", "txu"; + dmas = <&audma0 0x05>, <&audma1 0x06>; + dma-names = "rx", "tx"; }; ssi3: ssi-3 { interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x07>, <&audma1 0x08>, <&audma0 0x6f>, <&audma1 0x70>; - dma-names = "rx", "tx", "rxu", "txu"; + dmas = <&audma0 0x07>, <&audma1 0x08>; + dma-names = "rx", "tx"; }; ssi4: ssi-4 { interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x09>, <&audma1 0x0a>, <&audma0 0x71>, <&audma1 0x72>; - dma-names = "rx", "tx", "rxu", "txu"; + dmas = <&audma0 0x09>, <&audma1 0x0a>; + dma-names = "rx", "tx"; }; ssi5: ssi-5 { interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x0b>, <&audma1 0x0c>, <&audma0 0x73>, <&audma1 0x74>; - dma-names = "rx", "tx", "rxu", "txu"; + dmas = <&audma0 0x0b>, <&audma1 0x0c>; + dma-names = "rx", "tx"; }; ssi6: ssi-6 { interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x0d>, <&audma1 0x0e>, <&audma0 0x75>, <&audma1 0x76>; - dma-names = "rx", "tx", "rxu", "txu"; + dmas = <&audma0 0x0d>, <&audma1 0x0e>; + dma-names = "rx", "tx"; }; ssi7: ssi-7 { interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x0f>, <&audma1 0x10>, <&audma0 0x79>, <&audma1 0x7a>; - dma-names = "rx", "tx", "rxu", "txu"; + dmas = <&audma0 0x0f>, <&audma1 0x10>; + dma-names = "rx", "tx"; }; ssi8: ssi-8 { interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x11>, <&audma1 0x12>, <&audma0 0x7b>, <&audma1 0x7c>; - dma-names = "rx", "tx", "rxu", "txu"; + dmas = <&audma0 0x11>, <&audma1 0x12>; + dma-names = "rx", "tx"; }; ssi9: ssi-9 { interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x13>, <&audma1 0x14>, <&audma0 0x7d>, <&audma1 0x7e>; - dma-names = "rx", "tx", "rxu", "txu"; + dmas = <&audma0 0x13>, <&audma1 0x14>; + dma-names = "rx", "tx"; }; }; diff --git a/dts/src/arm64/renesas/r8a77965.dtsi b/dts/src/arm64/renesas/r8a77965.dtsi index 4b3730f640..9763d108e1 100644 --- a/dts/src/arm64/renesas/r8a77965.dtsi +++ b/dts/src/arm64/renesas/r8a77965.dtsi @@ -105,7 +105,7 @@ #size-cells = <0>; a57_0: cpu@0 { - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0x0>; device_type = "cpu"; power-domains = <&sysc R8A77965_PD_CA57_CPU0>; @@ -116,7 +116,7 @@ }; a57_1: cpu@1 { - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0x1>; device_type = "cpu"; power-domains = <&sysc R8A77965_PD_CA57_CPU1>; diff --git a/dts/src/arm64/renesas/r8a77970-v3msk.dts b/dts/src/arm64/renesas/r8a77970-v3msk.dts index 0dbcb4cccc..15cc9fed2e 100644 --- a/dts/src/arm64/renesas/r8a77970-v3msk.dts +++ b/dts/src/arm64/renesas/r8a77970-v3msk.dts @@ -108,6 +108,8 @@ phy0: ethernet-phy@0 { rxc-skew-ps = <1500>; reg = <0>; + interrupt-parent = <&gpio1>; + interrupts = <17 IRQ_TYPE_LEVEL_LOW>; }; }; diff --git a/dts/src/arm64/renesas/r8a77970.dtsi b/dts/src/arm64/renesas/r8a77970.dtsi index 563428d1cd..5b6164d4b8 100644 --- a/dts/src/arm64/renesas/r8a77970.dtsi +++ b/dts/src/arm64/renesas/r8a77970.dtsi @@ -37,7 +37,7 @@ a53_0: cpu@0 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0>; clocks = <&cpg CPG_CORE R8A77970_CLK_Z2>; power-domains = <&sysc R8A77970_PD_CA53_CPU0>; @@ -47,7 +47,7 @@ a53_1: cpu@1 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <1>; clocks = <&cpg CPG_CORE R8A77970_CLK_Z2>; power-domains = <&sysc R8A77970_PD_CA53_CPU1>; diff --git a/dts/src/arm64/renesas/r8a77980.dtsi b/dts/src/arm64/renesas/r8a77980.dtsi index 5bd9b2547c..4081622d54 100644 --- a/dts/src/arm64/renesas/r8a77980.dtsi +++ b/dts/src/arm64/renesas/r8a77980.dtsi @@ -38,7 +38,7 @@ a53_0: cpu@0 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0>; clocks = <&cpg CPG_CORE R8A77980_CLK_Z2>; power-domains = <&sysc R8A77980_PD_CA53_CPU0>; @@ -48,7 +48,7 @@ a53_1: cpu@1 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <1>; clocks = <&cpg CPG_CORE R8A77980_CLK_Z2>; power-domains = <&sysc R8A77980_PD_CA53_CPU1>; @@ -58,7 +58,7 @@ a53_2: cpu@2 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <2>; clocks = <&cpg CPG_CORE R8A77980_CLK_Z2>; power-domains = <&sysc R8A77980_PD_CA53_CPU2>; @@ -68,7 +68,7 @@ a53_3: cpu@3 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <3>; clocks = <&cpg CPG_CORE R8A77980_CLK_Z2>; power-domains = <&sysc R8A77980_PD_CA53_CPU3>; diff --git a/dts/src/arm64/renesas/r8a77990-ebisu.dts b/dts/src/arm64/renesas/r8a77990-ebisu.dts index 62bdddcbba..144c0820cf 100644 --- a/dts/src/arm64/renesas/r8a77990-ebisu.dts +++ b/dts/src/arm64/renesas/r8a77990-ebisu.dts @@ -39,6 +39,16 @@ clock-frequency = <11289600>; }; + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm3 0 50000>; + + brightness-levels = <512 511 505 494 473 440 392 327 241 133 0>; + default-brightness-level = <10>; + + power-supply = <®_12p0v>; + }; + cvbs-in { compatible = "composite-video-connector"; label = "CVBS IN"; @@ -159,16 +169,13 @@ }; rsnd_ak4613: sound { - compatible = "simple-scu-audio-card"; + compatible = "simple-audio-card"; simple-audio-card,name = "rsnd-ak4613"; simple-audio-card,format = "left_j"; simple-audio-card,bitclock-master = <&sndcpu>; simple-audio-card,frame-master = <&sndcpu>; - simple-audio-card,prefix = "ak4613"; - simple-audio-card,routing = "ak4613 Playback", "DAI0 Playback", - "DAI0 Capture", "ak4613 Capture"; sndcpu: simple-audio-card,cpu { sound-dai = <&rcar_sound>; }; @@ -184,6 +191,15 @@ clock-frequency = <24576000>; }; + reg_12p0v: regulator2 { + compatible = "regulator-fixed"; + regulator-name = "D12.0V"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-boot-on; + regulator-always-on; + }; + x13_clk: x13 { compatible = "fixed-clock"; #clock-cells = <0>; @@ -248,7 +264,6 @@ pinctrl-names = "default"; renesas,no-ether-link; phy-handle = <&phy0>; - phy-mode = "rgmii-txid"; status = "okay"; phy0: ethernet-phy@0 { @@ -680,6 +695,7 @@ vmmc-supply = <®_3p3v>; vqmmc-supply = <®_1p8v>; mmc-hs200-1_8v; + mmc-hs400-1_8v; bus-width = <8>; non-removable; status = "okay"; diff --git a/dts/src/arm64/renesas/r8a77990.dtsi b/dts/src/arm64/renesas/r8a77990.dtsi index b2f606e286..d2ad665fe2 100644 --- a/dts/src/arm64/renesas/r8a77990.dtsi +++ b/dts/src/arm64/renesas/r8a77990.dtsi @@ -2,7 +2,7 @@ /* * Device Tree Source for the R-Car E3 (R8A77990) SoC * - * Copyright (C) 2018 Renesas Electronics Corp. + * Copyright (C) 2018-2019 Renesas Electronics Corp. */ #include <dt-bindings/clock/r8a77990-cpg-mssr.h> @@ -55,26 +55,51 @@ clock-frequency = <0>; }; + cluster1_opp: opp_table10 { + compatible = "operating-points-v2"; + opp-shared; + opp-800000000 { + opp-hz = /bits/ 64 <800000000>; + opp-microvolt = <820000>; + clock-latency-ns = <300000>; + }; + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <820000>; + clock-latency-ns = <300000>; + }; + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <820000>; + clock-latency-ns = <300000>; + opp-suspend; + }; + }; + cpus { #address-cells = <1>; #size-cells = <0>; a53_0: cpu@0 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0>; device_type = "cpu"; power-domains = <&sysc R8A77990_PD_CA53_CPU0>; next-level-cache = <&L2_CA53>; enable-method = "psci"; + clocks =<&cpg CPG_CORE R8A77990_CLK_Z2>; + operating-points-v2 = <&cluster1_opp>; }; a53_1: cpu@1 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <1>; device_type = "cpu"; power-domains = <&sysc R8A77990_PD_CA53_CPU1>; next-level-cache = <&L2_CA53>; enable-method = "psci"; + clocks =<&cpg CPG_CORE R8A77990_CLK_Z2>; + operating-points-v2 = <&cluster1_opp>; }; L2_CA53: cache-controller-0 { @@ -240,6 +265,74 @@ resets = <&cpg 906>; }; + pfc: pin-controller@e6060000 { + compatible = "renesas,pfc-r8a77990"; + reg = <0 0xe6060000 0 0x508>; + }; + + i2c_dvfs: i2c@e60b0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-r8a77990"; + reg = <0 0xe60b0000 0 0x15>; + interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 926>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 926>; + dmas = <&dmac0 0x11>, <&dmac0 0x10>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + cpg: clock-controller@e6150000 { + compatible = "renesas,r8a77990-cpg-mssr"; + reg = <0 0xe6150000 0 0x1000>; + clocks = <&extal_clk>; + clock-names = "extal"; + #clock-cells = <2>; + #power-domain-cells = <0>; + #reset-cells = <1>; + }; + + rst: reset-controller@e6160000 { + compatible = "renesas,r8a77990-rst"; + reg = <0 0xe6160000 0 0x0200>; + }; + + sysc: system-controller@e6180000 { + compatible = "renesas,r8a77990-sysc"; + reg = <0 0xe6180000 0 0x0400>; + #power-domain-cells = <1>; + }; + + thermal: thermal@e6190000 { + compatible = "renesas,thermal-r8a77990"; + reg = <0 0xe6190000 0 0x10>, <0 0xe6190100 0 0x38>; + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 522>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 522>; + #thermal-sensor-cells = <0>; + }; + + intc_ex: interrupt-controller@e61c0000 { + compatible = "renesas,intc-ex-r8a77990", "renesas,irqc"; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0 0xe61c0000 0 0x200>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 407>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 407>; + }; + i2c0: i2c@e6500000 { #address-cells = <1>; #size-cells = <0>; @@ -369,74 +462,6 @@ status = "disabled"; }; - pfc: pin-controller@e6060000 { - compatible = "renesas,pfc-r8a77990"; - reg = <0 0xe6060000 0 0x508>; - }; - - i2c_dvfs: i2c@e60b0000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "renesas,iic-r8a77990"; - reg = <0 0xe60b0000 0 0x15>; - interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 926>; - power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; - resets = <&cpg 926>; - dmas = <&dmac0 0x11>, <&dmac0 0x10>; - dma-names = "tx", "rx"; - status = "disabled"; - }; - - cpg: clock-controller@e6150000 { - compatible = "renesas,r8a77990-cpg-mssr"; - reg = <0 0xe6150000 0 0x1000>; - clocks = <&extal_clk>; - clock-names = "extal"; - #clock-cells = <2>; - #power-domain-cells = <0>; - #reset-cells = <1>; - }; - - rst: reset-controller@e6160000 { - compatible = "renesas,r8a77990-rst"; - reg = <0 0xe6160000 0 0x0200>; - }; - - sysc: system-controller@e6180000 { - compatible = "renesas,r8a77990-sysc"; - reg = <0 0xe6180000 0 0x0400>; - #power-domain-cells = <1>; - }; - - thermal: thermal@e6190000 { - compatible = "renesas,thermal-r8a77990"; - reg = <0 0xe6190000 0 0x10>, <0 0xe6190100 0 0x38>; - interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 522>; - power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; - resets = <&cpg 522>; - #thermal-sensor-cells = <0>; - }; - - intc_ex: interrupt-controller@e61c0000 { - compatible = "renesas,intc-ex-r8a77990", "renesas,irqc"; - #interrupt-cells = <2>; - interrupt-controller; - reg = <0 0xe61c0000 0 0x200>; - interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 407>; - power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; - resets = <&cpg 407>; - }; - hscif0: serial@e6540000 { compatible = "renesas,hscif-r8a77990", "renesas,rcar-gen3-hscif", @@ -993,7 +1018,9 @@ <&cpg CPG_CORE R8A77990_CLK_S3D1C>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - + dmas = <&dmac1 0x13>, <&dmac1 0x12>, + <&dmac2 0x13>, <&dmac2 0x12>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; resets = <&cpg 310>; status = "disabled"; @@ -1040,9 +1067,8 @@ <&cpg CPG_CORE R8A77990_CLK_S3D1C>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac1 0x5b>, <&dmac1 0x5a>, - <&dmac2 0x5b>, <&dmac2 0x5a>; - dma-names = "tx", "rx", "tx", "rx"; + dmas = <&dmac0 0x5b>, <&dmac0 0x5a>; + dma-names = "tx", "rx"; power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; resets = <&cpg 202>; status = "disabled"; @@ -1526,6 +1552,33 @@ resets = <&cpg 408>; }; + pciec0: pcie@fe000000 { + compatible = "renesas,pcie-r8a77990", + "renesas,pcie-rcar-gen3"; + reg = <0 0xfe000000 0 0x80000>; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x00 0xff>; + device_type = "pci"; + ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000 + 0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000 + 0x02000000 0 0x30000000 0 0x30000000 0 0x08000000 + 0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>; + /* Map all possible DDR as inbound ranges */ + dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x40000000>; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>; + clock-names = "pcie", "pcie_bus"; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 319>; + status = "disabled"; + }; + vspb0: vsp@fe960000 { compatible = "renesas,vsp2"; reg = <0 0xfe960000 0 0x8000>; @@ -1724,33 +1777,6 @@ }; }; - pciec0: pcie@fe000000 { - compatible = "renesas,pcie-r8a77990", - "renesas,pcie-rcar-gen3"; - reg = <0 0xfe000000 0 0x80000>; - #address-cells = <3>; - #size-cells = <2>; - bus-range = <0x00 0xff>; - device_type = "pci"; - ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000 - 0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000 - 0x02000000 0 0x30000000 0 0x30000000 0 0x08000000 - 0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>; - /* Map all possible DDR as inbound ranges */ - dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x40000000>; - interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>; - clock-names = "pcie", "pcie_bus"; - power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; - resets = <&cpg 319>; - status = "disabled"; - }; - prr: chipid@fff00044 { compatible = "renesas,prr"; reg = <0 0xfff00044 0 4>; diff --git a/dts/src/arm64/renesas/r8a77995-draak.dts b/dts/src/arm64/renesas/r8a77995-draak.dts index 89df9bc844..db2bed1751 100644 --- a/dts/src/arm64/renesas/r8a77995-draak.dts +++ b/dts/src/arm64/renesas/r8a77995-draak.dts @@ -28,8 +28,8 @@ compatible = "pwm-backlight"; pwms = <&pwm1 0 50000>; - brightness-levels = <256 128 64 16 8 4 0>; - default-brightness-level = <6>; + brightness-levels = <512 511 505 494 473 440 392 327 241 133 0>; + default-brightness-level = <10>; power-supply = <®_12p0v>; enable-gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>; diff --git a/dts/src/arm64/renesas/r8a77995.dtsi b/dts/src/arm64/renesas/r8a77995.dtsi index 8530d9fc13..5bf3af246e 100644 --- a/dts/src/arm64/renesas/r8a77995.dtsi +++ b/dts/src/arm64/renesas/r8a77995.dtsi @@ -27,7 +27,7 @@ #size-cells = <0>; a53_0: cpu@0 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0>; device_type = "cpu"; power-domains = <&sysc R8A77995_PD_CA53_CPU0>; diff --git a/dts/src/arm64/renesas/salvator-common.dtsi b/dts/src/arm64/renesas/salvator-common.dtsi index f66d990b92..a225c24572 100644 --- a/dts/src/arm64/renesas/salvator-common.dtsi +++ b/dts/src/arm64/renesas/salvator-common.dtsi @@ -764,6 +764,7 @@ vqmmc-supply = <®_1p8v>; bus-width = <8>; mmc-hs200-1_8v; + mmc-hs400-1_8v; non-removable; fixed-emmc-driver-type = <1>; status = "okay"; diff --git a/dts/src/arm64/renesas/ulcb-kf.dtsi b/dts/src/arm64/renesas/ulcb-kf.dtsi index 1b316d79df..7a09576b31 100644 --- a/dts/src/arm64/renesas/ulcb-kf.dtsi +++ b/dts/src/arm64/renesas/ulcb-kf.dtsi @@ -6,11 +6,38 @@ * Copyright (C) 2017 Cogent Embedded, Inc. */ +/* + * SSI-PCM3168A + * aplay -D plughw:0,2 xxx.wav + * arecord -D plughw:0,3 xxx.wav + */ + / { aliases { serial1 = &hscif0; serial2 = &scif1; }; + + clksndsel: clksndsel { + #clock-cells = <0>; + compatible = "gpio-mux-clock"; + clocks = <&cs2000>, <&audio_clk_a>; /* clk8snd, clksnd */ + select-gpios = <&gpio_exp_75 13 GPIO_ACTIVE_HIGH>; + }; + + snd_3p3v: regulator-snd_3p3v { + compatible = "regulator-fixed"; + regulator-name = "snd-3.3v"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + snd_vcc5v: regulator-snd_vcc5v { + compatible = "regulator-fixed"; + regulator-name = "snd-vcc5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; }; &can0 { @@ -44,6 +71,7 @@ }; &i2c2 { + /* U11 */ gpio_exp_74: gpio@74 { compatible = "ti,tca9539"; reg = <0x74>; @@ -53,6 +81,13 @@ interrupt-parent = <&gpio6>; interrupts = <8 IRQ_TYPE_EDGE_FALLING>; + audio_out_off { + gpio-hog; + gpios = <0 GPIO_ACTIVE_HIGH>; /* P00 */ + output-high; + line-name = "Audio_Out_OFF"; + }; + hub_pwen { gpio-hog; gpios = <6 GPIO_ACTIVE_HIGH>; @@ -80,8 +115,16 @@ output-high; line-name = "OTG EXTLPn"; }; + + snd_rst { + gpio-hog; + gpios = <15 GPIO_ACTIVE_HIGH>; /* P17 */ + output-high; + line-name = "SND_RST"; + }; }; + /* U5 */ gpio_exp_75: gpio@75 { compatible = "ti,tca9539"; reg = <0x75>; @@ -98,6 +141,48 @@ #size-cells = <0>; reg = <0x71>; reset-gpios = <&gpio5 3 GPIO_ACTIVE_LOW>; + + /* Audio_SDA, Audio_SCL */ + i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + + pcm3168a: audio-codec@44 { + #sound-dai-cells = <0>; + compatible = "ti,pcm3168a"; + reg = <0x44>; + clocks = <&clksndsel>; + clock-names = "scki"; + + VDD1-supply = <&snd_3p3v>; + VDD2-supply = <&snd_3p3v>; + VCCAD1-supply = <&snd_vcc5v>; + VCCAD2-supply = <&snd_vcc5v>; + VCCDA1-supply = <&snd_vcc5v>; + VCCDA2-supply = <&snd_vcc5v>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + mclk-fs = <512>; + port@0 { + reg = <0>; + pcm3168a_endpoint_p: endpoint { + remote-endpoint = <&rsnd_for_pcm3168a_play>; + clocks = <&clksndsel>; + }; + }; + port@1 { + reg = <1>; + pcm3168a_endpoint_c: endpoint { + remote-endpoint = <&rsnd_for_pcm3168a_capture>; + clocks = <&clksndsel>; + }; + }; + }; + }; + }; }; }; @@ -173,6 +258,11 @@ groups = "usb0"; function = "usb0"; }; + + sound_pcm_pins: sound-pcm { + groups = "ssi349_ctrl", "ssi3_data", "ssi4_data"; + function = "ssi"; + }; }; &scif1 { @@ -193,3 +283,51 @@ &xhci0 { status = "okay"; }; + +&sound_card { + dais = <&rsnd_port0 /* ak4613 */ + &rsnd_port1 /* HDMI0 */ + &rsnd_port2 /* pcm3168a playback */ + &rsnd_port3 /* pcm3168a capture */ + >; +}; + +&rcar_sound { + pinctrl-0 = <&sound_pins + &sound_clk_pins + &sound_pcm_pins>; + + ports { + /* rsnd_port0/1 are on salvator-common */ + rsnd_port2: port@2 { + reg = <2>; + rsnd_for_pcm3168a_play: endpoint { + remote-endpoint = <&pcm3168a_endpoint_p>; + + dai-format = "i2s"; + bitclock-master = <&rsnd_for_pcm3168a_play>; + frame-master = <&rsnd_for_pcm3168a_play>; + dai-tdm-slot-num = <8>; + + playback = <&ssi3>; + }; + }; + rsnd_port3: port@3 { + reg = <3>; + rsnd_for_pcm3168a_capture: endpoint { + remote-endpoint = <&pcm3168a_endpoint_c>; + + dai-format = "i2s"; + bitclock-master = <&rsnd_for_pcm3168a_capture>; + frame-master = <&rsnd_for_pcm3168a_capture>; + dai-tdm-slot-num = <6>; + + capture = <&ssi4>; + }; + }; + }; +}; + +&ssi4 { + shared-pin; +}; diff --git a/dts/src/arm64/renesas/ulcb.dtsi b/dts/src/arm64/renesas/ulcb.dtsi index de694fdae0..e70e1bac2b 100644 --- a/dts/src/arm64/renesas/ulcb.dtsi +++ b/dts/src/arm64/renesas/ulcb.dtsi @@ -6,6 +6,14 @@ * Copyright (C) 2016 Cogent Embedded, Inc. */ +/* + * SSI-AK4613 + * aplay -D plughw:0,0 xxx.wav + * arecord -D plughw:0,0 xxx.wav + * SSI-HDMI + * aplay -D plughw:0,1 xxx.wav + */ + #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> @@ -83,20 +91,13 @@ regulator-always-on; }; - rsnd_ak4613: sound { - compatible = "simple-audio-card"; - - simple-audio-card,format = "left_j"; - simple-audio-card,bitclock-master = <&sndcpu>; - simple-audio-card,frame-master = <&sndcpu>; - - sndcpu: simple-audio-card,cpu { - sound-dai = <&rcar_sound>; - }; + sound_card: sound { + compatible = "audio-graph-card"; + label = "rcar-sound"; - sndcodec: simple-audio-card,codec { - sound-dai = <&ak4613>; - }; + dais = <&rsnd_port0 /* ak4613 */ + &rsnd_port1 /* HDMI0 */ + >; }; vcc_sdhi0: regulator-vcc-sdhi0 { @@ -182,6 +183,12 @@ remote-endpoint = <&hdmi0_con>; }; }; + port@2 { + reg = <2>; + dw_hdmi0_snd_in: endpoint { + remote-endpoint = <&rsnd_for_hdmi>; + }; + }; }; }; @@ -211,6 +218,12 @@ asahi-kasei,out4-single-end; asahi-kasei,out5-single-end; asahi-kasei,out6-single-end; + + port { + ak4613_endpoint: endpoint { + remote-endpoint = <&rsnd_for_ak4613>; + }; + }; }; cs2000: clk-multiplier@4f { @@ -384,10 +397,33 @@ <&audio_clk_c>, <&cpg CPG_CORE CPG_AUDIO_CLK_I>; - rcar_sound,dai { - dai0 { - playback = <&ssi0 &src0 &dvc0>; - capture = <&ssi1 &src1 &dvc1>; + ports { + #address-cells = <1>; + #size-cells = <0>; + rsnd_port0: port@0 { + reg = <0>; + rsnd_for_ak4613: endpoint { + remote-endpoint = <&ak4613_endpoint>; + + dai-format = "left_j"; + bitclock-master = <&rsnd_for_ak4613>; + frame-master = <&rsnd_for_ak4613>; + + playback = <&ssi0 &src0 &dvc0>; + capture = <&ssi1 &src1 &dvc1>; + }; + }; + rsnd_port1: port@1 { + reg = <1>; + rsnd_for_hdmi: endpoint { + remote-endpoint = <&dw_hdmi0_snd_in>; + + dai-format = "i2s"; + bitclock-master = <&rsnd_for_hdmi>; + frame-master = <&rsnd_for_hdmi>; + + playback = <&ssi2>; + }; }; }; }; @@ -427,6 +463,7 @@ vqmmc-supply = <®_1p8v>; bus-width = <8>; mmc-hs200-1_8v; + mmc-hs400-1_8v; non-removable; status = "okay"; }; diff --git a/dts/src/arm64/rockchip/px30.dtsi b/dts/src/arm64/rockchip/px30.dtsi index 9aa8d5ef9e..eb992d60e6 100644 --- a/dts/src/arm64/rockchip/px30.dtsi +++ b/dts/src/arm64/rockchip/px30.dtsi @@ -40,7 +40,7 @@ cpu0: cpu@0 { device_type = "cpu"; - compatible = "arm,cortex-a35", "arm,armv8"; + compatible = "arm,cortex-a35"; reg = <0x0 0x0>; enable-method = "psci"; clocks = <&cru ARMCLK>; @@ -52,7 +52,7 @@ cpu1: cpu@1 { device_type = "cpu"; - compatible = "arm,cortex-a35", "arm,armv8"; + compatible = "arm,cortex-a35"; reg = <0x0 0x1>; enable-method = "psci"; clocks = <&cru ARMCLK>; @@ -64,7 +64,7 @@ cpu2: cpu@2 { device_type = "cpu"; - compatible = "arm,cortex-a35", "arm,armv8"; + compatible = "arm,cortex-a35"; reg = <0x0 0x2>; enable-method = "psci"; clocks = <&cru ARMCLK>; @@ -76,7 +76,7 @@ cpu3: cpu@3 { device_type = "cpu"; - compatible = "arm,cortex-a35", "arm,armv8"; + compatible = "arm,cortex-a35"; reg = <0x0 0x3>; enable-method = "psci"; clocks = <&cru ARMCLK>; diff --git a/dts/src/arm64/rockchip/rk3328-roc-cc.dts b/dts/src/arm64/rockchip/rk3328-roc-cc.dts index 99d0d99129..33c44e8572 100644 --- a/dts/src/arm64/rockchip/rk3328-roc-cc.dts +++ b/dts/src/arm64/rockchip/rk3328-roc-cc.dts @@ -104,6 +104,7 @@ phy-mode = "rgmii"; pinctrl-names = "default"; pinctrl-0 = <&rgmiim1_pins>; + snps,force_thresh_dma_mode; snps,reset-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>; snps,reset-active-low; snps,reset-delays-us = <0 10000 50000>; diff --git a/dts/src/arm64/rockchip/rk3328-rock64.dts b/dts/src/arm64/rockchip/rk3328-rock64.dts index 040b36ef0d..2157a52827 100644 --- a/dts/src/arm64/rockchip/rk3328-rock64.dts +++ b/dts/src/arm64/rockchip/rk3328-rock64.dts @@ -68,7 +68,8 @@ sound { compatible = "audio-graph-card"; label = "rockchip,rk3328"; - dais = <&spdif_p0>; + dais = <&i2s1_p0 + &spdif_p0>; }; spdif-dit { @@ -83,6 +84,16 @@ }; }; +&codec { + status = "okay"; + + port@0 { + codec_p0_0: endpoint { + remote-endpoint = <&i2s1_p0_0>; + }; + }; +}; + &cpu0 { cpu-supply = <&vdd_arm>; }; @@ -245,6 +256,18 @@ }; }; +&i2s1 { + status = "okay"; + + i2s1_p0: port { + i2s1_p0_0: endpoint { + dai-format = "i2s"; + mclk-fs = <256>; + remote-endpoint = <&codec_p0_0>; + }; + }; +}; + &io_domains { status = "okay"; @@ -292,7 +315,6 @@ &spdif { pinctrl-0 = <&spdifm0_tx>; status = "okay"; - #sound-dai-cells = <0>; spdif_p0: port { spdif_p0_0: endpoint { diff --git a/dts/src/arm64/rockchip/rk3328.dtsi b/dts/src/arm64/rockchip/rk3328.dtsi index ecd7f19c35..84f14b132e 100644 --- a/dts/src/arm64/rockchip/rk3328.dtsi +++ b/dts/src/arm64/rockchip/rk3328.dtsi @@ -37,7 +37,7 @@ cpu0: cpu@0 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x0>; clocks = <&cru ARMCLK>; #cooling-cells = <2>; @@ -49,7 +49,7 @@ cpu1: cpu@1 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x1>; clocks = <&cru ARMCLK>; #cooling-cells = <2>; @@ -61,7 +61,7 @@ cpu2: cpu@2 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x2>; clocks = <&cru ARMCLK>; #cooling-cells = <2>; @@ -73,7 +73,7 @@ cpu3: cpu@3 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x3>; clocks = <&cru ARMCLK>; #cooling-cells = <2>; @@ -184,6 +184,7 @@ clock-names = "i2s_clk", "i2s_hclk"; dmas = <&dmac 11>, <&dmac 12>; dma-names = "tx", "rx"; + #sound-dai-cells = <0>; status = "disabled"; }; @@ -195,6 +196,7 @@ clock-names = "i2s_clk", "i2s_hclk"; dmas = <&dmac 14>, <&dmac 15>; dma-names = "tx", "rx"; + #sound-dai-cells = <0>; status = "disabled"; }; @@ -206,6 +208,7 @@ clock-names = "i2s_clk", "i2s_hclk"; dmas = <&dmac 0>, <&dmac 1>; dma-names = "tx", "rx"; + #sound-dai-cells = <0>; status = "disabled"; }; @@ -219,6 +222,7 @@ dma-names = "tx"; pinctrl-names = "default"; pinctrl-0 = <&spdifm2_tx>; + #sound-dai-cells = <0>; status = "disabled"; }; @@ -672,6 +676,16 @@ }; }; + codec: codec@ff410000 { + compatible = "rockchip,rk3328-codec"; + reg = <0x0 0xff410000 0x0 0x1000>; + clocks = <&cru PCLK_ACODECPHY>, <&cru SCLK_I2S1>; + clock-names = "pclk", "mclk"; + rockchip,grf = <&grf>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + hdmiphy: phy@ff430000 { compatible = "rockchip,rk3328-hdmi-phy"; reg = <0x0 0xff430000 0x0 0x10000>; diff --git a/dts/src/arm64/rockchip/rk3368-evb.dtsi b/dts/src/arm64/rockchip/rk3368-evb.dtsi index 4de089149c..e96eb62f36 100644 --- a/dts/src/arm64/rockchip/rk3368-evb.dtsi +++ b/dts/src/arm64/rockchip/rk3368-evb.dtsi @@ -116,7 +116,6 @@ &emmc { bus-width = <8>; cap-mmc-highspeed; - disable-wp; mmc-pwrseq = <&emmc_pwrseq>; non-removable; pinctrl-names = "default"; diff --git a/dts/src/arm64/rockchip/rk3368-geekbox.dts b/dts/src/arm64/rockchip/rk3368-geekbox.dts index 6b9b1ac199..8fa550cbd1 100644 --- a/dts/src/arm64/rockchip/rk3368-geekbox.dts +++ b/dts/src/arm64/rockchip/rk3368-geekbox.dts @@ -78,7 +78,6 @@ bus-width = <8>; cap-mmc-highspeed; clock-frequency = <150000000>; - disable-wp; non-removable; vmmc-supply = <&vcc_io>; vqmmc-supply = <&vcc18_flash>; diff --git a/dts/src/arm64/rockchip/rk3368-lion.dtsi b/dts/src/arm64/rockchip/rk3368-lion.dtsi index 1315972412..1b35d612b6 100644 --- a/dts/src/arm64/rockchip/rk3368-lion.dtsi +++ b/dts/src/arm64/rockchip/rk3368-lion.dtsi @@ -139,7 +139,6 @@ &emmc { bus-width = <8>; clock-frequency = <150000000>; - disable-wp; mmc-hs200-1_8v; non-removable; vmmc-supply = <&vcc33_io>; diff --git a/dts/src/arm64/rockchip/rk3368-orion-r68-meta.dts b/dts/src/arm64/rockchip/rk3368-orion-r68-meta.dts index 96147d93dd..f5aa3cad67 100644 --- a/dts/src/arm64/rockchip/rk3368-orion-r68-meta.dts +++ b/dts/src/arm64/rockchip/rk3368-orion-r68-meta.dts @@ -161,7 +161,6 @@ &emmc { bus-width = <8>; cap-mmc-highspeed; - disable-wp; mmc-pwrseq = <&emmc_pwrseq>; mmc-hs200-1_2v; mmc-hs200-1_8v; diff --git a/dts/src/arm64/rockchip/rk3368-px5-evb.dts b/dts/src/arm64/rockchip/rk3368-px5-evb.dts index fc1bf078a4..41edcfd531 100644 --- a/dts/src/arm64/rockchip/rk3368-px5-evb.dts +++ b/dts/src/arm64/rockchip/rk3368-px5-evb.dts @@ -48,7 +48,6 @@ bus-width = <8>; cap-mmc-highspeed; clock-frequency = <150000000>; - disable-wp; mmc-hs200-1_8v; no-sdio; no-sd; diff --git a/dts/src/arm64/rockchip/rk3368-r88.dts b/dts/src/arm64/rockchip/rk3368-r88.dts index 7452bedf1a..d34064c65f 100644 --- a/dts/src/arm64/rockchip/rk3368-r88.dts +++ b/dts/src/arm64/rockchip/rk3368-r88.dts @@ -149,7 +149,6 @@ &emmc { bus-width = <8>; cap-mmc-highspeed; - disable-wp; mmc-pwrseq = <&emmc_pwrseq>; non-removable; pinctrl-names = "default"; diff --git a/dts/src/arm64/rockchip/rk3368.dtsi b/dts/src/arm64/rockchip/rk3368.dtsi index 7014d10b95..06e7c31d7d 100644 --- a/dts/src/arm64/rockchip/rk3368.dtsi +++ b/dts/src/arm64/rockchip/rk3368.dtsi @@ -73,7 +73,7 @@ cpu_l0: cpu@0 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x0>; enable-method = "psci"; #cooling-cells = <2>; /* min followed by max */ @@ -81,7 +81,7 @@ cpu_l1: cpu@1 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x1>; enable-method = "psci"; #cooling-cells = <2>; /* min followed by max */ @@ -89,7 +89,7 @@ cpu_l2: cpu@2 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x2>; enable-method = "psci"; #cooling-cells = <2>; /* min followed by max */ @@ -97,7 +97,7 @@ cpu_l3: cpu@3 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x3>; enable-method = "psci"; #cooling-cells = <2>; /* min followed by max */ @@ -105,7 +105,7 @@ cpu_b0: cpu@100 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x100>; enable-method = "psci"; #cooling-cells = <2>; /* min followed by max */ @@ -113,7 +113,7 @@ cpu_b1: cpu@101 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x101>; enable-method = "psci"; #cooling-cells = <2>; /* min followed by max */ @@ -121,7 +121,7 @@ cpu_b2: cpu@102 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x102>; enable-method = "psci"; #cooling-cells = <2>; /* min followed by max */ @@ -129,7 +129,7 @@ cpu_b3: cpu@103 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x103>; enable-method = "psci"; #cooling-cells = <2>; /* min followed by max */ diff --git a/dts/src/arm64/rockchip/rk3399-gru-chromebook.dtsi b/dts/src/arm64/rockchip/rk3399-gru-chromebook.dtsi index c400be6417..931640e9ae 100644 --- a/dts/src/arm64/rockchip/rk3399-gru-chromebook.dtsi +++ b/dts/src/arm64/rockchip/rk3399-gru-chromebook.dtsi @@ -200,6 +200,19 @@ pinctrl-0 = <&bl_en>; pwm-delay-us = <10000>; }; + + gpio_keys: gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&bt_host_wake_l>; + + wake_on_bt: wake-on-bt { + label = "Wake-on-Bluetooth"; + gpios = <&gpio0 3 GPIO_ACTIVE_LOW>; + linux,code = <KEY_WAKEUP>; + wakeup-source; + }; + }; }; &ppvar_bigcpu { diff --git a/dts/src/arm64/rockchip/rk3399-gru-scarlet.dtsi b/dts/src/arm64/rockchip/rk3399-gru-scarlet.dtsi index fc50b3ef75..62ea7d6a7d 100644 --- a/dts/src/arm64/rockchip/rk3399-gru-scarlet.dtsi +++ b/dts/src/arm64/rockchip/rk3399-gru-scarlet.dtsi @@ -175,6 +175,21 @@ pinctrl-0 = <&dmic_en>; wakeup-delay-ms = <250>; }; + + gpio_keys: gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pen_eject_odl>; + + pen-insert { + label = "Pen Insert"; + /* Insert = low, eject = high */ + gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; + linux,code = <SW_PEN_INSERTED>; + linux,input-type = <EV_SW>; + wakeup-source; + }; + }; }; /* pp900_s0 aliases */ @@ -328,20 +343,6 @@ camera: &i2c7 { <400000000>; }; -&gpio_keys { - pinctrl-names = "default"; - pinctrl-0 = <&bt_host_wake_l>, <&pen_eject_odl>; - - pen-insert { - label = "Pen Insert"; - /* Insert = low, eject = high */ - gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; - linux,code = <SW_PEN_INSERTED>; - linux,input-type = <EV_SW>; - wakeup-source; - }; -}; - &i2c_tunnel { google,remote-bus = <0>; }; @@ -437,8 +438,19 @@ camera: &i2c7 { status = "okay"; }; -&wake_on_bt { - gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; +&usb_host0_ohci { + #address-cells = <1>; + #size-cells = <0>; + + qca_bt: bluetooth@1 { + compatible = "usbcf3,e300", "usb4ca,301a"; + reg = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&bt_host_wake_l>; + interrupt-parent = <&gpio1>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "wakeup"; + }; }; /* PINCTRL OVERRIDES */ @@ -455,7 +467,7 @@ camera: &i2c7 { }; &bt_host_wake_l { - rockchip,pins = <1 2 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <1 2 RK_FUNC_GPIO &pcfg_pull_none>; }; &ec_ap_int_l { diff --git a/dts/src/arm64/rockchip/rk3399-gru.dtsi b/dts/src/arm64/rockchip/rk3399-gru.dtsi index ea607a601a..da03fa9c56 100644 --- a/dts/src/arm64/rockchip/rk3399-gru.dtsi +++ b/dts/src/arm64/rockchip/rk3399-gru.dtsi @@ -269,19 +269,6 @@ #clock-cells = <0>; }; - gpio_keys: gpio-keys { - compatible = "gpio-keys"; - pinctrl-names = "default"; - pinctrl-0 = <&bt_host_wake_l>; - - wake_on_bt: wake-on-bt { - label = "Wake-on-Bluetooth"; - gpios = <&gpio0 3 GPIO_ACTIVE_LOW>; - linux,code = <KEY_WAKEUP>; - wakeup-source; - }; - }; - max98357a: max98357a { compatible = "maxim,max98357a"; pinctrl-names = "default"; diff --git a/dts/src/arm64/rockchip/rk3399-nanopc-t4.dts b/dts/src/arm64/rockchip/rk3399-nanopc-t4.dts new file mode 100644 index 0000000000..84433cf02b --- /dev/null +++ b/dts/src/arm64/rockchip/rk3399-nanopc-t4.dts @@ -0,0 +1,91 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * FriendlyElec NanoPC-T4 board device tree source + * + * Copyright (c) 2018 FriendlyElec Computer Tech. Co., Ltd. + * (http://www.friendlyarm.com) + * + * Copyright (c) 2018 Collabora Ltd. + */ + +/dts-v1/; +#include "rk3399-nanopi4.dtsi" + +/ { + model = "FriendlyElec NanoPC-T4"; + compatible = "friendlyarm,nanopc-t4", "rockchip,rk3399"; + + vcc12v0_sys: vcc12v0-sys { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <12000000>; + regulator-min-microvolt = <12000000>; + regulator-name = "vcc12v0_sys"; + }; + + vcc5v0_host0: vcc5v0-host0 { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc5v0_host0"; + vin-supply = <&vcc5v0_sys>; + }; + + adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 1>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1800000>; + poll-interval = <100>; + + recovery { + label = "Recovery"; + linux,code = <KEY_VENDOR>; + press-threshold-microvolt = <18000>; + }; + }; + + ir-receiver { + compatible = "gpio-ir-receiver"; + gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&ir_rx>; + }; +}; + +&pinctrl { + ir { + ir_rx: ir-rx { + /* external pullup to VCC3V3_SYS, despite being 1.8V :/ */ + rockchip,pins = <0 RK_PA6 RK_FUNC_1 &pcfg_pull_none>; + }; + }; +}; + +&sdhci { + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; +}; + +&u2phy0_host { + phy-supply = <&vcc5v0_host0>; +}; + +&u2phy1_host { + phy-supply = <&vcc5v0_host0>; +}; + +&vcc5v0_sys { + vin-supply = <&vcc12v0_sys>; +}; + +&vcc3v3_sys { + vin-supply = <&vcc12v0_sys>; +}; + +&vbus_typec { + enable-active-high; + gpios = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; + vin-supply = <&vcc5v0_sys>; +}; diff --git a/dts/src/arm64/rockchip/rk3399-nanopi-m4.dts b/dts/src/arm64/rockchip/rk3399-nanopi-m4.dts new file mode 100644 index 0000000000..60358ab8c7 --- /dev/null +++ b/dts/src/arm64/rockchip/rk3399-nanopi-m4.dts @@ -0,0 +1,66 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * FriendlyElec NanoPi M4 board device tree source + * + * Copyright (c) 2018 FriendlyElec Computer Tech. Co., Ltd. + * (http://www.friendlyarm.com) + * + * Copyright (c) 2018 Collabora Ltd. + * Copyright (c) 2019 Arm Ltd. + */ + +/dts-v1/; +#include "rk3399-nanopi4.dtsi" + +/ { + model = "FriendlyElec NanoPi M4"; + compatible = "friendlyarm,nanopi-m4", "rockchip,rk3399"; + + vdd_5v: vdd-5v { + compatible = "regulator-fixed"; + regulator-name = "vdd_5v"; + regulator-always-on; + regulator-boot-on; + }; + + vcc5v0_core: vcc5v0-core { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_core"; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vdd_5v>; + }; + + vcc5v0_usb1: vcc5v0-usb1 { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_usb1"; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc5v0_sys>; + }; + + vcc5v0_usb2: vcc5v0-usb2 { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_usb2"; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc5v0_sys>; + }; +}; + +&vcc3v3_sys { + vin-supply = <&vcc5v0_core>; +}; + +&u2phy0_host { + phy-supply = <&vcc5v0_usb1>; +}; + +&u2phy1_host { + phy-supply = <&vcc5v0_usb2>; +}; + +&vbus_typec { + regulator-always-on; + vin-supply = <&vdd_5v>; +}; diff --git a/dts/src/arm64/rockchip/rk3399-nanopi4.dtsi b/dts/src/arm64/rockchip/rk3399-nanopi4.dtsi new file mode 100644 index 0000000000..d325e11728 --- /dev/null +++ b/dts/src/arm64/rockchip/rk3399-nanopi4.dtsi @@ -0,0 +1,703 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * RK3399-based FriendlyElec boards device tree source + * + * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd + * + * Copyright (c) 2018 FriendlyElec Computer Tech. Co., Ltd. + * (http://www.friendlyarm.com) + * + * Copyright (c) 2018 Collabora Ltd. + * Copyright (c) 2019 Arm Ltd. + */ + +/dts-v1/; +#include <dt-bindings/input/linux-event-codes.h> +#include "rk3399.dtsi" +#include "rk3399-opp.dtsi" + +/ { + chosen { + stdout-path = "serial2:1500000n8"; + }; + + clkin_gmac: external-gmac-clock { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "clkin_gmac"; + #clock-cells = <0>; + }; + + vcc3v3_sys: vcc3v3-sys { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc3v3_sys"; + }; + + vcc5v0_sys: vcc5v0-sys { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-name = "vcc5v0_sys"; + vin-supply = <&vdd_5v>; + }; + + /* switched by pmic_sleep */ + vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc1v8_s3"; + vin-supply = <&vcc_1v8>; + }; + + vcc3v0_sd: vcc3v0-sd { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc0_pwr_h>; + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc3v0_sd"; + vin-supply = <&vcc3v3_sys>; + }; + + vbus_typec: vbus-typec { + compatible = "regulator-fixed"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-name = "vbus_typec"; + }; + + gpio-keys { + compatible = "gpio-keys"; + autorepeat; + pinctrl-names = "default"; + pinctrl-0 = <&power_key>; + + power { + debounce-interval = <100>; + gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; + label = "GPIO Key Power"; + linux,code = <KEY_POWER>; + wakeup-source; + }; + }; + + leds: gpio-leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&leds_gpio>; + + status { + gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>; + label = "status_led"; + linux,default-trigger = "heartbeat"; + }; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&rk808 1>; + clock-names = "ext_clock"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_reg_on_h>; + reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; + }; +}; + +&cpu_b0 { + cpu-supply = <&vdd_cpu_b>; +}; + +&cpu_b1 { + cpu-supply = <&vdd_cpu_b>; +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_l>; +}; + +&emmc_phy { + status = "okay"; +}; + +&gmac { + assigned-clock-parents = <&clkin_gmac>; + assigned-clocks = <&cru SCLK_RMII_SRC>; + clock_in_out = "input"; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>; + phy-mode = "rgmii"; + phy-supply = <&vcc3v3_s3>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 50000>; + snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; + tx_delay = <0x28>; + rx_delay = <0x11>; + status = "okay"; +}; + +&gpu { + mali-supply = <&vdd_gpu>; + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c7>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_cec>; + status = "okay"; +}; + +&i2c0 { + clock-frequency = <400000>; + i2c-scl-rising-time-ns = <160>; + i2c-scl-falling-time-ns = <30>; + status = "okay"; + + vdd_cpu_b: regulator@40 { + compatible = "silergy,syr827"; + reg = <0x40>; + fcs,suspend-voltage-selector = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&cpu_b_sleep>; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1500000>; + regulator-name = "vdd_cpu_b"; + regulator-ramp-delay = <1000>; + vin-supply = <&vcc3v3_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu: regulator@41 { + compatible = "silergy,syr828"; + reg = <0x41>; + fcs,suspend-voltage-selector = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&gpu_sleep>; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1500000>; + regulator-name = "vdd_gpu"; + regulator-ramp-delay = <1000>; + vin-supply = <&vcc3v3_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + rk808: pmic@1b { + compatible = "rockchip,rk808"; + reg = <0x1b>; + clock-output-names = "xin32k", "rtc_clko_wifi"; + #clock-cells = <1>; + interrupt-parent = <&gpio1>; + interrupts = <21 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l>; + rockchip,system-power-controller; + wakeup-source; + + vcc1-supply = <&vcc3v3_sys>; + vcc2-supply = <&vcc3v3_sys>; + vcc3-supply = <&vcc3v3_sys>; + vcc4-supply = <&vcc3v3_sys>; + vcc6-supply = <&vcc3v3_sys>; + vcc7-supply = <&vcc3v3_sys>; + vcc8-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc3v3_sys>; + vcc10-supply = <&vcc3v3_sys>; + vcc11-supply = <&vcc3v3_sys>; + vcc12-supply = <&vcc3v3_sys>; + vddio-supply = <&vcc_3v0>; + + regulators { + vdd_center: DCDC_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-name = "vdd_center"; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_l: DCDC_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-name = "vdd_cpu_l"; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc_ddr"; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_1v8: DCDC_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc_1v8"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc1v8_cam: LDO_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc1v8_cam"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v0_touch: LDO_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc3v0_touch"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc1v8_pmupll: LDO_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc1v8_pmupll"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc_sdio: LDO_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-init-microvolt = <3000000>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_sdio"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vcca3v0_codec: LDO_REG5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcca3v0_codec"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v5: LDO_REG6 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vcc_1v5"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1500000>; + }; + }; + + vcca1v8_codec: LDO_REG7 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcca1v8_codec"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v0: LDO_REG8 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc_3v0"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vcc3v3_s3: SWITCH_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc3v3_s3"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_s0: SWITCH_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc3v3_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; +}; + +&i2c1 { + clock-frequency = <200000>; + i2c-scl-rising-time-ns = <150>; + i2c-scl-falling-time-ns = <30>; + status = "okay"; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c4 { + clock-frequency = <400000>; + i2c-scl-rising-time-ns = <160>; + i2c-scl-falling-time-ns = <30>; + status = "okay"; + + fusb0: typec-portc@22 { + compatible = "fcs,fusb302"; + reg = <0x22>; + interrupt-parent = <&gpio1>; + interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&fusb0_int>; + vbus-supply = <&vbus_typec>; + }; +}; + +&i2c7 { + status = "okay"; +}; + +&io_domains { + bt656-supply = <&vcc_1v8>; + audio-supply = <&vcca1v8_codec>; + sdmmc-supply = <&vcc_sdio>; + gpio1830-supply = <&vcc_3v0>; + status = "okay"; +}; + +&pcie_phy { + assigned-clock-parents = <&cru SCLK_PCIEPHY_REF100M>; + assigned-clock-rates = <100000000>; + assigned-clocks = <&cru SCLK_PCIEPHY_REF>; + status = "okay"; +}; + +&pcie0 { + ep-gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_HIGH>; + max-link-speed = <2>; + num-lanes = <4>; + status = "okay"; +}; + +&pinctrl { + fusb30x { + fusb0_int: fusb0-int { + rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + gpio-leds { + leds_gpio: leds-gpio { + rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + cpu_b_sleep: cpu-b-sleep { + rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + gpu_sleep: gpu-sleep { + rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + pmic_int_l: pmic-int-l { + rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + rockchip-key { + power_key: power-key { + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + sdio { + bt_host_wake_l: bt-host-wake-l { + rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_reg_on_h: bt-reg-on-h { + /* external pullup to VCC1V8_PMUPLL */ + rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_wake_l: bt-wake-l { + rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + wifi_reg_on_h: wifi-reg_on-h { + rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + sdmmc { + sdmmc0_det_l: sdmmc0-det-l { + rockchip,pins = <0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + sdmmc0_pwr_h: sdmmc0-pwr-h { + rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pmu_io_domains { + pmu1830-supply = <&vcc_3v0>; + status = "okay"; +}; + +&pwm0 { + status = "okay"; +}; + +&pwm1 { + status = "okay"; +}; + +&pwm2 { + pinctrl-names = "active"; + pinctrl-0 = <&pwm2_pin_pull_down>; + status = "okay"; +}; + +&saradc { + vref-supply = <&vcca1v8_s3>; + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + mmc-hs200-1_8v; + non-removable; + status = "okay"; +}; + +&sdio0 { + bus-width = <4>; + cap-sd-highspeed; + cap-sdio-irq; + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>; + sd-uhs-sdr104; + status = "okay"; +}; + +&sdmmc { + bus-width = <4>; + cap-sd-highspeed; + cap-mmc-highspeed; + cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>; + disable-wp; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_bus4 &sdmmc_clk &sdmmc_cmd &sdmmc0_det_l>; + sd-uhs-sdr104; + vmmc-supply = <&vcc3v0_sd>; + vqmmc-supply = <&vcc_sdio>; + status = "okay"; +}; + +&tcphy0 { + status = "okay"; +}; + +&tcphy1 { + status = "okay"; +}; + +&tsadc { + /* tshut mode 0:CRU 1:GPIO */ + rockchip,hw-tshut-mode = <1>; + /* tshut polarity 0:LOW 1:HIGH */ + rockchip,hw-tshut-polarity = <1>; + status = "okay"; +}; + +&u2phy0 { + status = "okay"; +}; + +&u2phy0_host { + status = "okay"; +}; + +&u2phy0_otg { + status = "okay"; +}; + +&u2phy1 { + status = "okay"; +}; + +&u2phy1_host { + status = "okay"; +}; + +&u2phy1_otg { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer &uart0_rts &uart0_cts>; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + clocks = <&rk808 1>; + clock-names = "lpo"; + device-wakeup-gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>; + max-speed = <4000000>; + pinctrl-names = "default"; + pinctrl-0 = <&bt_reg_on_h &bt_host_wake_l &bt_wake_l>; + vbat-supply = <&vcc3v3_sys>; + vddio-supply = <&vcc_1v8>; + }; +}; + +&uart2 { + status = "okay"; +}; + +&usbdrd3_0 { + status = "okay"; +}; + +&usbdrd3_1 { + status = "okay"; +}; + +&usbdrd_dwc3_0 { + status = "okay"; +}; + +&usbdrd_dwc3_1 { + dr_mode = "host"; + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +&vopb { + status = "okay"; +}; + +&vopb_mmu { + status = "okay"; +}; + +&vopl { + status = "okay"; +}; + +&vopl_mmu { + status = "okay"; +}; diff --git a/dts/src/arm64/rockchip/rk3399-rock-pi-4.dts b/dts/src/arm64/rockchip/rk3399-rock-pi-4.dts new file mode 100644 index 0000000000..4a543f2117 --- /dev/null +++ b/dts/src/arm64/rockchip/rk3399-rock-pi-4.dts @@ -0,0 +1,606 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 Akash Gajjar <Akash_Gajjar@mentor.com> + * Copyright (c) 2019 Pragnesh Patel <Pragnesh_Patel@mentor.com> + */ + +/dts-v1/; +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/pwm/pwm.h> +#include "rk3399.dtsi" +#include "rk3399-opp.dtsi" + +/ { + model = "Radxa ROCK Pi 4"; + compatible = "radxa,rockpi4", "rockchip,rk3399"; + + chosen { + stdout-path = "serial2:1500000n8"; + }; + + clkin_gmac: external-gmac-clock { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "clkin_gmac"; + #clock-cells = <0>; + }; + + vcc12v_dcin: dc-12v { + compatible = "regulator-fixed"; + regulator-name = "vcc12v_dcin"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + vcc5v0_sys: vcc-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc12v_dcin>; + }; + + vcc3v3_pcie: vcc3v3-pcie-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie_pwr_en>; + regulator-name = "vcc3v3_pcie"; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc5v0_sys>; + }; + + vcc3v3_sys: vcc3v3-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc5v0_host: vcc5v0-host-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_host_en>; + regulator-name = "vcc5v0_host"; + regulator-always-on; + vin-supply = <&vcc5v0_sys>; + }; + + vcc5v0_typec: vcc5v0-typec-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_typec_en>; + regulator-name = "vcc5v0_typec"; + regulator-always-on; + vin-supply = <&vcc5v0_sys>; + }; + + vcc_lan: vcc3v3-phy-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_lan"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_log: vdd-log { + compatible = "pwm-regulator"; + pwms = <&pwm2 0 25000 1>; + regulator-name = "vdd_log"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + vin-supply = <&vcc5v0_sys>; + }; +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_b0 { + cpu-supply = <&vdd_cpu_b>; +}; + +&cpu_b1 { + cpu-supply = <&vdd_cpu_b>; +}; + +&emmc_phy { + status = "okay"; +}; + +&gmac { + assigned-clocks = <&cru SCLK_RMII_SRC>; + assigned-clock-parents = <&clkin_gmac>; + clock_in_out = "input"; + phy-supply = <&vcc_lan>; + phy-mode = "rgmii"; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>; + snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 50000>; + tx_delay = <0x28>; + rx_delay = <0x11>; + status = "okay"; +}; + +&hdmi { + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_cec>; + status = "okay"; +}; + +&i2c0 { + clock-frequency = <400000>; + i2c-scl-rising-time-ns = <168>; + i2c-scl-falling-time-ns = <4>; + status = "okay"; + + rk808: pmic@1b { + compatible = "rockchip,rk808"; + reg = <0x1b>; + interrupt-parent = <&gpio1>; + interrupts = <21 IRQ_TYPE_LEVEL_LOW>; + #clock-cells = <1>; + clock-output-names = "xin32k", "rk808-clkout2"; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l>; + rockchip,system-power-controller; + wakeup-source; + + vcc1-supply = <&vcc5v0_sys>; + vcc2-supply = <&vcc5v0_sys>; + vcc3-supply = <&vcc5v0_sys>; + vcc4-supply = <&vcc5v0_sys>; + vcc6-supply = <&vcc5v0_sys>; + vcc7-supply = <&vcc5v0_sys>; + vcc8-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc5v0_sys>; + vcc10-supply = <&vcc5v0_sys>; + vcc11-supply = <&vcc5v0_sys>; + vcc12-supply = <&vcc3v3_sys>; + vddio-supply = <&vcc_1v8>; + + regulators { + vdd_center: DCDC_REG1 { + regulator-name = "vdd_center"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_l: DCDC_REG2 { + regulator-name = "vdd_cpu_l"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_1v8: DCDC_REG4 { + regulator-name = "vcc_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc1v8_codec: LDO_REG1 { + regulator-name = "vcc1v8_codec"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc1v8_hdmi: LDO_REG2 { + regulator-name = "vcc1v8_hdmi"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca_1v8: LDO_REG3 { + regulator-name = "vcca_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc_sdio: LDO_REG4 { + regulator-name = "vcc_sdio"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vcca3v0_codec: LDO_REG5 { + regulator-name = "vcca3v0_codec"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v5: LDO_REG6 { + regulator-name = "vcc_1v5"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1500000>; + }; + }; + + vcc0v9_hdmi: LDO_REG7 { + regulator-name = "vcc0v9_hdmi"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v0: LDO_REG8 { + regulator-name = "vcc_3v0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vcc_cam: SWITCH_REG1 { + regulator-name = "vcc_cam"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_mipi: SWITCH_REG2 { + regulator-name = "vcc_mipi"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; + + vdd_cpu_b: regulator@40 { + compatible = "silergy,syr827"; + reg = <0x40>; + fcs,suspend-voltage-selector = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&vsel1_gpio>; + regulator-name = "vdd_cpu_b"; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1500000>; + regulator-ramp-delay = <1000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu: regulator@41 { + compatible = "silergy,syr828"; + reg = <0x41>; + fcs,suspend-voltage-selector = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&vsel2_gpio>; + regulator-name = "vdd_gpu"; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1500000>; + regulator-ramp-delay = <1000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&i2c1 { + i2c-scl-rising-time-ns = <300>; + i2c-scl-falling-time-ns = <15>; + status = "okay"; +}; + +&i2c3 { + i2c-scl-rising-time-ns = <450>; + i2c-scl-falling-time-ns = <15>; + status = "okay"; +}; + +&i2c4 { + i2c-scl-rising-time-ns = <600>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; +}; + +&i2s0 { + rockchip,playback-channels = <8>; + rockchip,capture-channels = <8>; + status = "okay"; +}; + +&i2s1 { + rockchip,playback-channels = <2>; + rockchip,capture-channels = <2>; + status = "okay"; +}; + +&i2s2 { + status = "okay"; +}; + +&io_domains { + status = "okay"; + + bt656-supply = <&vcc_3v0>; + audio-supply = <&vcc_3v0>; + sdmmc-supply = <&vcc_sdio>; + gpio1830-supply = <&vcc_3v0>; +}; + +&pmu_io_domains { + status = "okay"; + + pmu1830-supply = <&vcc_3v0>; +}; + +&pinctrl { + pcie { + pcie_pwr_en: pcie-pwr-en { + rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + vsel1_gpio: vsel1-gpio { + rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + vsel2_gpio: vsel2-gpio { + rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + + usb-typec { + vcc5v0_typec_en: vcc5v0-typec-en { + rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + usb2 { + vcc5v0_host_en: vcc5v0-host-en { + rockchip,pins = <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pwm2 { + status = "okay"; +}; + +&saradc { + status = "okay"; + + vref-supply = <&vcc_1v8>; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>; + disable-wp; + max-frequency = <150000000>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk &sdmmc_cd &sdmmc_cmd &sdmmc_bus4>; + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + non-removable; + status = "okay"; +}; + +&tcphy0 { + status = "okay"; +}; + +&tcphy1 { + status = "okay"; +}; + +&tsadc { + status = "okay"; + + /* tshut mode 0:CRU 1:GPIO */ + rockchip,hw-tshut-mode = <1>; + /* tshut polarity 0:LOW 1:HIGH */ + rockchip,hw-tshut-polarity = <1>; +}; + +&u2phy0 { + status = "okay"; + + u2phy0_otg: otg-port { + status = "okay"; + }; + + u2phy0_host: host-port { + phy-supply = <&vcc5v0_host>; + status = "okay"; + }; +}; + +&u2phy1 { + status = "okay"; + + u2phy1_otg: otg-port { + status = "okay"; + }; + + u2phy1_host: host-port { + phy-supply = <&vcc5v0_host>; + status = "okay"; + }; +}; + +&uart2 { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +&usbdrd3_0 { + status = "okay"; +}; + +&usbdrd_dwc3_0 { + status = "okay"; + dr_mode = "otg"; +}; + +&usbdrd3_1 { + status = "okay"; +}; + +&usbdrd_dwc3_1 { + status = "okay"; + dr_mode = "host"; +}; + +&vopb { + status = "okay"; +}; + +&vopb_mmu { + status = "okay"; +}; + +&vopl { + status = "okay"; +}; + +&vopl_mmu { + status = "okay"; +}; diff --git a/dts/src/arm64/rockchip/rk3399-rock960.dtsi b/dts/src/arm64/rockchip/rk3399-rock960.dtsi index 56abbb08c1..2927db4dda 100644 --- a/dts/src/arm64/rockchip/rk3399-rock960.dtsi +++ b/dts/src/arm64/rockchip/rk3399-rock960.dtsi @@ -9,6 +9,15 @@ #include "rk3399-opp.dtsi" / { + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&rk808 1>; + clock-names = "ext_clock"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_enable_h>; + reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; + }; + vcc1v8_s0: vcc1v8-s0 { compatible = "regulator-fixed"; regulator-name = "vcc1v8_s0"; @@ -94,6 +103,10 @@ status = "okay"; }; +&hdmi_sound { + status = "okay"; +}; + &i2c0 { clock-frequency = <400000>; i2c-scl-rising-time-ns = <168>; @@ -336,6 +349,10 @@ status = "okay"; }; +&i2s2 { + status = "okay"; +}; + &io_domains { bt656-supply = <&vcc1v8_s0>; /* bt656_gpio2ab_ms */ audio-supply = <&vcc1v8_s0>; /* audio_gpio3d4a_ms */ @@ -362,6 +379,20 @@ }; &pinctrl { + bt { + bt_enable_h: bt-enable-h { + rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_host_wake_l: bt-host-wake-l { + rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_wake_l: bt-wake-l { + rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + sdmmc { sdmmc_bus1: sdmmc-bus1 { rockchip,pins = @@ -387,6 +418,26 @@ }; }; + sdio0 { + sdio0_bus4: sdio0-bus4 { + rockchip,pins = + <2 20 RK_FUNC_1 &pcfg_pull_up_20ma>, + <2 21 RK_FUNC_1 &pcfg_pull_up_20ma>, + <2 22 RK_FUNC_1 &pcfg_pull_up_20ma>, + <2 23 RK_FUNC_1 &pcfg_pull_up_20ma>; + }; + + sdio0_cmd: sdio0-cmd { + rockchip,pins = + <2 24 RK_FUNC_1 &pcfg_pull_up_20ma>; + }; + + sdio0_clk: sdio0-clk { + rockchip,pins = + <2 25 RK_FUNC_1 &pcfg_pull_none_20ma>; + }; + }; + pmic { pmic_int_l: pmic-int-l { rockchip,pins = @@ -403,6 +454,19 @@ <1 14 RK_FUNC_GPIO &pcfg_pull_down>; }; }; + + sdio-pwrseq { + wifi_enable_h: wifi-enable-h { + rockchip,pins = + <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + wifi { + wifi_host_wake_l: wifi-host-wake-l { + rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; }; &pwm2 { @@ -413,6 +477,32 @@ status = "okay"; }; +&sdio0 { + bus-width = <4>; + clock-frequency = <50000000>; + cap-sdio-irq; + cap-sd-highspeed; + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>; + sd-uhs-sdr104; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + brcmf: wifi@1 { + compatible = "brcm,bcm4329-fmac"; + reg = <1>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>; + interrupt-names = "host-wake"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_host_wake_l>; + }; +}; + &sdhci { bus-width = <8>; mmc-hs400-1_8v; @@ -437,10 +527,28 @@ status = "okay"; }; +&tsadc { + rockchip,hw-tshut-mode = <1>; + rockchip,hw-tshut-polarity = <1>; + rockchip,hw-tshut-temp = <110000>; + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_xfer &uart0_cts>; + pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + clocks = <&rk808 1>; + clock-names = "ext_clock"; + device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>; + }; }; &uart2 { diff --git a/dts/src/arm64/rockchip/rk3399-rockpro64.dts b/dts/src/arm64/rockchip/rk3399-rockpro64.dts index be78172abc..1f2394e058 100644 --- a/dts/src/arm64/rockchip/rk3399-rockpro64.dts +++ b/dts/src/arm64/rockchip/rk3399-rockpro64.dts @@ -25,15 +25,6 @@ #clock-cells = <0>; }; - dc_12v: dc-12v { - compatible = "regulator-fixed"; - regulator-name = "dc_12v"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - }; - gpio-keys { compatible = "gpio-keys"; autorepeat; @@ -83,6 +74,15 @@ reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; }; + vcc12v_dcin: vcc12v-dcin { + compatible = "regulator-fixed"; + regulator-name = "vcc12v_dcin"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + /* switched by pmic_sleep */ vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 { compatible = "regulator-fixed"; @@ -103,7 +103,7 @@ regulator-name = "vcc3v3_pcie"; regulator-always-on; regulator-boot-on; - vin-supply = <&dc_12v>; + vin-supply = <&vcc12v_dcin>; }; vcc3v3_sys: vcc3v3-sys { @@ -113,7 +113,7 @@ regulator-boot-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - vin-supply = <&vcc_sys>; + vin-supply = <&vcc5v0_sys>; }; /* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */ @@ -125,7 +125,7 @@ pinctrl-0 = <&vcc5v0_host_en>; regulator-name = "vcc5v0_host"; regulator-always-on; - vin-supply = <&vcc_sys>; + vin-supply = <&vcc5v0_usb>; }; vcc5v0_typec: vcc5v0-typec-regulator { @@ -136,17 +136,27 @@ pinctrl-0 = <&vcc5v0_typec_en>; regulator-name = "vcc5v0_typec"; regulator-always-on; - vin-supply = <&vcc_sys>; + vin-supply = <&vcc5v0_usb>; }; - vcc_sys: vcc-sys { + vcc5v0_sys: vcc5v0-sys { compatible = "regulator-fixed"; - regulator-name = "vcc_sys"; + regulator-name = "vcc5v0_sys"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - vin-supply = <&dc_12v>; + vin-supply = <&vcc12v_dcin>; + }; + + vcc5v0_usb: vcc5v0-usb { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_usb"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc12v_dcin>; }; vdd_log: vdd-log { @@ -157,7 +167,7 @@ regulator-boot-on; regulator-min-microvolt = <800000>; regulator-max-microvolt = <1400000>; - vin-supply = <&vcc_sys>; + vin-supply = <&vcc5v0_sys>; }; }; @@ -212,6 +222,11 @@ status = "okay"; }; +&gpu { + mali-supply = <&vdd_gpu>; + status = "okay"; +}; + &i2c0 { clock-frequency = <400000>; i2c-scl-rising-time-ns = <168>; @@ -230,18 +245,18 @@ rockchip,system-power-controller; wakeup-source; - vcc1-supply = <&vcc_sys>; - vcc2-supply = <&vcc_sys>; - vcc3-supply = <&vcc_sys>; - vcc4-supply = <&vcc_sys>; - vcc6-supply = <&vcc_sys>; - vcc7-supply = <&vcc_sys>; + vcc1-supply = <&vcc5v0_sys>; + vcc2-supply = <&vcc5v0_sys>; + vcc3-supply = <&vcc5v0_sys>; + vcc4-supply = <&vcc5v0_sys>; + vcc6-supply = <&vcc5v0_sys>; + vcc7-supply = <&vcc5v0_sys>; vcc8-supply = <&vcc3v3_sys>; - vcc9-supply = <&vcc_sys>; - vcc10-supply = <&vcc_sys>; - vcc11-supply = <&vcc_sys>; + vcc9-supply = <&vcc5v0_sys>; + vcc10-supply = <&vcc5v0_sys>; + vcc11-supply = <&vcc5v0_sys>; vcc12-supply = <&vcc3v3_sys>; - vddio-supply = <&vcc1v8_pmu>; + vddio-supply = <&vcca_1v8>; regulators { vdd_center: DCDC_REG1 { @@ -311,8 +326,8 @@ }; }; - vcc1v8_pmu: LDO_REG3 { - regulator-name = "vcc1v8_pmu"; + vcca_1v8: LDO_REG3 { + regulator-name = "vcca_1v8"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1800000>; @@ -413,7 +428,7 @@ regulator-ramp-delay = <1000>; regulator-always-on; regulator-boot-on; - vin-supply = <&vcc_sys>; + vin-supply = <&vcc5v0_sys>; regulator-state-mem { regulator-off-in-suspend; @@ -432,7 +447,7 @@ regulator-ramp-delay = <1000>; regulator-always-on; regulator-boot-on; - vin-supply = <&vcc_sys>; + vin-supply = <&vcc5v0_sys>; regulator-state-mem { regulator-off-in-suspend; @@ -522,12 +537,6 @@ }; }; - lcd-panel { - lcd_panel_reset: lcd-panel-reset { - rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - pcie { pcie_pwr_en: pcie-pwr-en { rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; diff --git a/dts/src/arm64/rockchip/rk3399-sapphire-excavator.dts b/dts/src/arm64/rockchip/rk3399-sapphire-excavator.dts index b48a63c3ef..808ea77f95 100644 --- a/dts/src/arm64/rockchip/rk3399-sapphire-excavator.dts +++ b/dts/src/arm64/rockchip/rk3399-sapphire-excavator.dts @@ -219,7 +219,6 @@ cap-sd-highspeed; cap-sdio-irq; clock-frequency = <50000000>; - disable-wp; keep-power-in-suspend; max-frequency = <50000000>; mmc-pwrseq = <&sdio_pwrseq>; diff --git a/dts/src/arm64/rockchip/rk3399.dtsi b/dts/src/arm64/rockchip/rk3399.dtsi index 6cc1c9fa4e..db9d948c0b 100644 --- a/dts/src/arm64/rockchip/rk3399.dtsi +++ b/dts/src/arm64/rockchip/rk3399.dtsi @@ -68,7 +68,7 @@ cpu_l0: cpu@0 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x0>; enable-method = "psci"; clocks = <&cru ARMCLKL>; @@ -79,7 +79,7 @@ cpu_l1: cpu@1 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x1>; enable-method = "psci"; clocks = <&cru ARMCLKL>; @@ -90,7 +90,7 @@ cpu_l2: cpu@2 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x2>; enable-method = "psci"; clocks = <&cru ARMCLKL>; @@ -101,7 +101,7 @@ cpu_l3: cpu@3 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x3>; enable-method = "psci"; clocks = <&cru ARMCLKL>; @@ -112,7 +112,7 @@ cpu_b0: cpu@100 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x0 0x100>; enable-method = "psci"; clocks = <&cru ARMCLKB>; @@ -123,7 +123,7 @@ cpu_b1: cpu@101 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x0 0x101>; enable-method = "psci"; clocks = <&cru ARMCLKB>; diff --git a/dts/src/arm64/socionext/uniphier-ld11.dtsi b/dts/src/arm64/socionext/uniphier-ld11.dtsi index 31ba52b14e..a3cd475b48 100644 --- a/dts/src/arm64/socionext/uniphier-ld11.dtsi +++ b/dts/src/arm64/socionext/uniphier-ld11.dtsi @@ -33,7 +33,7 @@ cpu0: cpu@0 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0 0x000>; clocks = <&sys_clk 33>; enable-method = "psci"; @@ -42,7 +42,7 @@ cpu1: cpu@1 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0 0x001>; clocks = <&sys_clk 33>; enable-method = "psci"; diff --git a/dts/src/arm64/socionext/uniphier-ld20-global.dts b/dts/src/arm64/socionext/uniphier-ld20-global.dts index d7ae28afef..9ca692ed1b 100644 --- a/dts/src/arm64/socionext/uniphier-ld20-global.dts +++ b/dts/src/arm64/socionext/uniphier-ld20-global.dts @@ -145,10 +145,10 @@ }; }; -&nand { +&usb { status = "okay"; }; -&usb { +&nand { status = "okay"; }; diff --git a/dts/src/arm64/socionext/uniphier-ld20.dtsi b/dts/src/arm64/socionext/uniphier-ld20.dtsi index 4a0c46cb11..017f6328c1 100644 --- a/dts/src/arm64/socionext/uniphier-ld20.dtsi +++ b/dts/src/arm64/socionext/uniphier-ld20.dtsi @@ -43,7 +43,7 @@ cpu0: cpu@0 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0 0x000>; clocks = <&sys_clk 32>; enable-method = "psci"; @@ -53,7 +53,7 @@ cpu1: cpu@1 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0 0x001>; clocks = <&sys_clk 32>; enable-method = "psci"; @@ -63,7 +63,7 @@ cpu2: cpu@100 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0 0x100>; clocks = <&sys_clk 33>; enable-method = "psci"; @@ -73,7 +73,7 @@ cpu3: cpu@101 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0 0x101>; clocks = <&sys_clk 33>; enable-method = "psci"; @@ -869,6 +869,53 @@ }; }; + pcie: pcie@66000000 { + compatible = "socionext,uniphier-pcie", "snps,dw-pcie"; + status = "disabled"; + reg-names = "dbi", "link", "config"; + reg = <0x66000000 0x1000>, <0x66010000 0x10000>, + <0x2fff0000 0x10000>; + #address-cells = <3>; + #size-cells = <2>; + clocks = <&sys_clk 24>; + resets = <&sys_rst 24>; + num-lanes = <1>; + num-viewport = <1>; + bus-range = <0x0 0xff>; + device_type = "pci"; + ranges = + /* downstream I/O */ + <0x81000000 0 0x00000000 0x2ffe0000 0 0x00010000>, + /* non-prefetchable memory */ + <0x82000000 0 0x20000000 0x20000000 0 0x0ffe0000>; + #interrupt-cells = <1>; + interrupt-names = "dma", "msi"; + interrupts = <0 224 4>, <0 225 4>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc 0>, /* INTA */ + <0 0 0 2 &pcie_intc 1>, /* INTB */ + <0 0 0 3 &pcie_intc 2>, /* INTC */ + <0 0 0 4 &pcie_intc 3>; /* INTD */ + phy-names = "pcie-phy"; + phys = <&pcie_phy>; + + pcie_intc: legacy-interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&gic>; + interrupts = <0 226 4>; + }; + }; + + pcie_phy: phy@66038000 { + compatible = "socionext,uniphier-ld20-pcie-phy"; + reg = <0x66038000 0x4000>; + #phy-cells = <0>; + clocks = <&sys_clk 24>; + resets = <&sys_rst 24>; + socionext,syscon = <&soc_glue>; + }; + nand: nand@68000000 { compatible = "socionext,uniphier-denali-nand-v5b"; status = "disabled"; diff --git a/dts/src/arm64/socionext/uniphier-pxs3-ref.dts b/dts/src/arm64/socionext/uniphier-pxs3-ref.dts index a41f7cac95..1965e4dfe4 100644 --- a/dts/src/arm64/socionext/uniphier-pxs3-ref.dts +++ b/dts/src/arm64/socionext/uniphier-pxs3-ref.dts @@ -101,14 +101,18 @@ }; }; -&nand { +&usb0 { status = "okay"; }; -&usb0 { +&usb1 { status = "okay"; }; -&usb1 { +&pcie { + status = "okay"; +}; + +&nand { status = "okay"; }; diff --git a/dts/src/arm64/socionext/uniphier-pxs3.dtsi b/dts/src/arm64/socionext/uniphier-pxs3.dtsi index 4f57c9e9d7..bb97abe1a5 100644 --- a/dts/src/arm64/socionext/uniphier-pxs3.dtsi +++ b/dts/src/arm64/socionext/uniphier-pxs3.dtsi @@ -39,7 +39,7 @@ cpu0: cpu@0 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0 0x000>; clocks = <&sys_clk 33>; enable-method = "psci"; @@ -48,7 +48,7 @@ cpu1: cpu@1 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0 0x001>; clocks = <&sys_clk 33>; enable-method = "psci"; @@ -57,7 +57,7 @@ cpu2: cpu@2 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0 0x002>; clocks = <&sys_clk 33>; enable-method = "psci"; @@ -66,7 +66,7 @@ cpu3: cpu@3 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0 0x003>; clocks = <&sys_clk 33>; enable-method = "psci"; @@ -727,6 +727,53 @@ }; }; + pcie: pcie@66000000 { + compatible = "socionext,uniphier-pcie", "snps,dw-pcie"; + status = "disabled"; + reg-names = "dbi", "link", "config"; + reg = <0x66000000 0x1000>, <0x66010000 0x10000>, + <0x2fff0000 0x10000>; + #address-cells = <3>; + #size-cells = <2>; + clocks = <&sys_clk 24>; + resets = <&sys_rst 24>; + num-lanes = <1>; + num-viewport = <1>; + bus-range = <0x0 0xff>; + device_type = "pci"; + ranges = + /* downstream I/O */ + <0x81000000 0 0x00000000 0x2ffe0000 0 0x00010000>, + /* non-prefetchable memory */ + <0x82000000 0 0x20000000 0x20000000 0 0x0ffe0000>; + #interrupt-cells = <1>; + interrupt-names = "dma", "msi"; + interrupts = <0 224 4>, <0 225 4>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc 0>, /* INTA */ + <0 0 0 2 &pcie_intc 1>, /* INTB */ + <0 0 0 3 &pcie_intc 2>, /* INTC */ + <0 0 0 4 &pcie_intc 3>; /* INTD */ + phy-names = "pcie-phy"; + phys = <&pcie_phy>; + + pcie_intc: legacy-interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&gic>; + interrupts = <0 226 4>; + }; + }; + + pcie_phy: phy@66038000 { + compatible = "socionext,uniphier-pxs3-pcie-phy"; + reg = <0x66038000 0x4000>; + #phy-cells = <0>; + clocks = <&sys_clk 24>; + resets = <&sys_rst 24>; + socionext,syscon = <&soc_glue>; + }; + nand: nand@68000000 { compatible = "socionext,uniphier-denali-nand-v5b"; status = "disabled"; diff --git a/dts/src/arm64/sprd/sc2731.dtsi b/dts/src/arm64/sprd/sc2731.dtsi index 82bd642d77..e15409f55f 100644 --- a/dts/src/arm64/sprd/sc2731.dtsi +++ b/dts/src/arm64/sprd/sc2731.dtsi @@ -13,12 +13,18 @@ spi-max-frequency = <26000000>; interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; - #interrupt-cells = <2>; + #interrupt-cells = <1>; #address-cells = <1>; #size-cells = <0>; + charger@0 { + compatible = "sprd,sc2731-charger"; + reg = <0x0>; + monitored-battery = <&bat>; + }; + led-controller@200 { - compatible = "sprd,sc27xx-bltc", "sprd,sc2731-bltc"; + compatible = "sprd,sc2731-bltc"; reg = <0x200>; #address-cells = <1>; #size-cells = <0>; @@ -40,17 +46,17 @@ }; rtc@280 { - compatible = "sprd,sc27xx-rtc", "sprd,sc2731-rtc"; + compatible = "sprd,sc2731-rtc"; reg = <0x280>; interrupt-parent = <&sc2731_pmic>; - interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <2>; }; pmic_eic: gpio@300 { - compatible = "sprd,sc27xx-eic"; + compatible = "sprd,sc2731-eic"; reg = <0x300>; interrupt-parent = <&sc2731_pmic>; - interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <5>; gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -58,29 +64,57 @@ }; efuse@380 { - compatible = "sprd,sc27xx-efuse", "sprd,sc2731-efuse"; + compatible = "sprd,sc2731-efuse"; reg = <0x380>; #address-cells = <1>; #size-cells = <1>; hwlocks = <&hwlock 12>; + + fgu_calib: calib@6 { + reg = <0x6 0x2>; + bits = <0 9>; + }; + + adc_big_scale: calib@24 { + reg = <0x24 0x2>; + }; + + adc_small_scale: calib@26 { + reg = <0x26 0x2>; + }; }; pmic_adc: adc@480 { - compatible = "sprd,sc27xx-adc", "sprd,sc2731-adc"; + compatible = "sprd,sc2731-adc"; reg = <0x480>; interrupt-parent = <&sc2731_pmic>; - interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <0>; #io-channel-cells = <1>; hwlocks = <&hwlock 4>; + nvmem-cell-names = "big_scale_calib", "small_scale_calib"; + nvmem-cells = <&adc_big_scale>, <&adc_small_scale>; + }; + + fgu@a00 { + compatible = "sprd,sc2731-fgu"; + reg = <0xa00>; + bat-detect-gpio = <&pmic_eic 9 GPIO_ACTIVE_HIGH>; + io-channels = <&pmic_adc 3>, <&pmic_adc 6>; + io-channel-names = "bat-temp", "charge-vol"; + monitored-battery = <&bat>; + nvmem-cell-names = "fgu_calib"; + nvmem-cells = <&fgu_calib>; + interrupt-parent = <&sc2731_pmic>; + interrupts = <4>; }; vibrator@ec8 { - compatible = "sprd,sc27xx-vibrator", "sprd,sc2731-vibrator"; + compatible = "sprd,sc2731-vibrator"; reg = <0xec8>; }; regulators { - compatible = "sprd,sc27xx-regulator"; + compatible = "sprd,sc2731-regulator"; vddarm0: BUCK_CPU0 { regulator-name = "vddarm0"; diff --git a/dts/src/arm64/sprd/sc9836.dtsi b/dts/src/arm64/sprd/sc9836.dtsi index 4bcdbb709c..286d7173f9 100644 --- a/dts/src/arm64/sprd/sc9836.dtsi +++ b/dts/src/arm64/sprd/sc9836.dtsi @@ -18,28 +18,28 @@ cpu0: cpu@0 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x0>; enable-method = "psci"; }; cpu1: cpu@1 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x1>; enable-method = "psci"; }; cpu2: cpu@2 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x2>; enable-method = "psci"; }; cpu3: cpu@3 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x3>; enable-method = "psci"; }; diff --git a/dts/src/arm64/sprd/sc9860.dtsi b/dts/src/arm64/sprd/sc9860.dtsi index 5f57bf055c..b25d199771 100644 --- a/dts/src/arm64/sprd/sc9860.dtsi +++ b/dts/src/arm64/sprd/sc9860.dtsi @@ -50,7 +50,7 @@ CPU0: cpu@530000 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x530000>; enable-method = "psci"; cpu-idle-states = <&CORE_PD &CLUSTER_PD>; @@ -58,7 +58,7 @@ CPU1: cpu@530001 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x530001>; enable-method = "psci"; cpu-idle-states = <&CORE_PD &CLUSTER_PD>; @@ -66,7 +66,7 @@ CPU2: cpu@530002 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x530002>; enable-method = "psci"; cpu-idle-states = <&CORE_PD &CLUSTER_PD>; @@ -74,7 +74,7 @@ CPU3: cpu@530003 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x530003>; enable-method = "psci"; cpu-idle-states = <&CORE_PD &CLUSTER_PD>; @@ -82,7 +82,7 @@ CPU4: cpu@530100 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x530100>; enable-method = "psci"; cpu-idle-states = <&CORE_PD &CLUSTER_PD>; @@ -90,7 +90,7 @@ CPU5: cpu@530101 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x530101>; enable-method = "psci"; cpu-idle-states = <&CORE_PD &CLUSTER_PD>; @@ -98,7 +98,7 @@ CPU6: cpu@530102 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x530102>; enable-method = "psci"; cpu-idle-states = <&CORE_PD &CLUSTER_PD>; @@ -106,7 +106,7 @@ CPU7: cpu@530103 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x530103>; enable-method = "psci"; cpu-idle-states = <&CORE_PD &CLUSTER_PD>; diff --git a/dts/src/arm64/sprd/sp9860g-1h10.dts b/dts/src/arm64/sprd/sp9860g-1h10.dts index 985ebb5d15..6b95fd94ce 100644 --- a/dts/src/arm64/sprd/sp9860g-1h10.dts +++ b/dts/src/arm64/sprd/sp9860g-1h10.dts @@ -39,6 +39,22 @@ #size-cells = <2>; ranges; }; + + bat: battery { + compatible = "simple-battery"; + charge-full-design-microamp-hours = <1900000>; + charge-term-current-microamp = <120000>; + constant_charge_voltage_max_microvolt = <4350000>; + internal-resistance-micro-ohms = <250000>; + ocv-capacity-celsius = <20>; + ocv-capacity-table-0 = <4185000 100>, <4113000 95>, <4066000 90>, + <4022000 85>, <3983000 80>, <3949000 75>, + <3917000 70>, <3889000 65>, <3864000 60>, + <3835000 55>, <3805000 50>, <3787000 45>, + <3777000 40>, <3773000 35>, <3770000 30>, + <3765000 25>, <3752000 20>, <3724000 15>, + <3680000 10>, <3605000 5>, <3400000 0>; + }; }; &uart0 { diff --git a/dts/src/arm64/synaptics/as370.dtsi b/dts/src/arm64/synaptics/as370.dtsi index 7331acf387..addeb0efc6 100644 --- a/dts/src/arm64/synaptics/as370.dtsi +++ b/dts/src/arm64/synaptics/as370.dtsi @@ -23,7 +23,7 @@ #size-cells = <0>; cpu0: cpu@0 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; device_type = "cpu"; reg = <0x0>; enable-method = "psci"; @@ -32,7 +32,7 @@ }; cpu1: cpu@1 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; device_type = "cpu"; reg = <0x1>; enable-method = "psci"; @@ -41,7 +41,7 @@ }; cpu2: cpu@2 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; device_type = "cpu"; reg = <0x2>; enable-method = "psci"; @@ -50,7 +50,7 @@ }; cpu3: cpu@3 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; device_type = "cpu"; reg = <0x3>; enable-method = "psci"; diff --git a/dts/src/arm64/synaptics/berlin4ct.dtsi b/dts/src/arm64/synaptics/berlin4ct.dtsi index 216767e2ed..15625b99e3 100644 --- a/dts/src/arm64/synaptics/berlin4ct.dtsi +++ b/dts/src/arm64/synaptics/berlin4ct.dtsi @@ -27,7 +27,7 @@ #size-cells = <0>; cpu0: cpu@0 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; device_type = "cpu"; reg = <0x0>; enable-method = "psci"; @@ -36,7 +36,7 @@ }; cpu1: cpu@1 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; device_type = "cpu"; reg = <0x1>; enable-method = "psci"; @@ -45,7 +45,7 @@ }; cpu2: cpu@2 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; device_type = "cpu"; reg = <0x2>; enable-method = "psci"; @@ -54,7 +54,7 @@ }; cpu3: cpu@3 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; device_type = "cpu"; reg = <0x3>; enable-method = "psci"; diff --git a/dts/src/arm64/ti/k3-am65-main.dtsi b/dts/src/arm64/ti/k3-am65-main.dtsi index 272cf8fc8d..752455269f 100644 --- a/dts/src/arm64/ti/k3-am65-main.dtsi +++ b/dts/src/arm64/ti/k3-am65-main.dtsi @@ -6,6 +6,26 @@ */ &cbass_main { + msmc_ram: sram@70000000 { + compatible = "mmio-sram"; + reg = <0x0 0x70000000 0x0 0x200000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x70000000 0x200000>; + + atf-sram@0 { + reg = <0x0 0x20000>; + }; + + sysfw-sram@f0000 { + reg = <0xf0000 0x10000>; + }; + + l3cache-sram@100000 { + reg = <0x100000 0x100000>; + }; + }; + gic500: interrupt-controller@1800000 { compatible = "arm,gic-v3"; #address-cells = <2>; @@ -191,4 +211,102 @@ #address-cells = <1>; #size-cells = <0>; }; + + sdhci0: sdhci@4f80000 { + compatible = "ti,am654-sdhci-5.1"; + reg = <0x0 0x4f80000 0x0 0x260>, <0x0 0x4f90000 0x0 0x134>; + power-domains = <&k3_pds 47>; + clocks = <&k3_clks 47 0>, <&k3_clks 47 1>; + clock-names = "clk_ahb", "clk_xin"; + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + ti,otap-del-sel = <0x2>; + ti,trm-icp = <0x8>; + dma-coherent; + }; + + scm_conf: scm_conf@100000 { + compatible = "syscon", "simple-mfd"; + reg = <0 0x00100000 0 0x1c000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x00100000 0x1c000>; + }; + + dwc3_0: dwc3@4000000 { + compatible = "ti,am654-dwc3"; + reg = <0x0 0x4000000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x4000000 0x20000>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + dma-coherent; + power-domains = <&k3_pds 151>; + assigned-clocks = <&k3_clks 151 2>, <&k3_clks 151 7>; + assigned-clock-parents = <&k3_clks 151 4>, /* set REF_CLK to 20MHz i.e. PER0_PLL/48 */ + <&k3_clks 151 9>; /* set PIPE3_TXB_CLK to CLK_12M_RC/256 (for HS only) */ + + usb0: usb@10000 { + compatible = "snps,dwc3"; + reg = <0x10000 0x10000>; + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "peripheral", + "host", + "otg"; + maximum-speed = "high-speed"; + dr_mode = "otg"; + phys = <&usb0_phy>; + phy-names = "usb2-phy"; + snps,dis_u3_susphy_quirk; + }; + }; + + usb0_phy: phy@4100000 { + compatible = "ti,am654-usb2", "ti,omap-usb2"; + reg = <0x0 0x4100000 0x0 0x54>; + syscon-phy-power = <&scm_conf 0x4000>; + clocks = <&k3_clks 151 0>, <&k3_clks 151 1>; + clock-names = "wkupclk", "refclk"; + #phy-cells = <0>; + }; + + dwc3_1: dwc3@4020000 { + compatible = "ti,am654-dwc3"; + reg = <0x0 0x4020000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x4020000 0x20000>; + interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; + dma-coherent; + power-domains = <&k3_pds 152>; + assigned-clocks = <&k3_clks 152 2>; + assigned-clock-parents = <&k3_clks 152 4>; /* set REF_CLK to 20MHz i.e. PER0_PLL/48 */ + + usb1: usb@10000 { + compatible = "snps,dwc3"; + reg = <0x10000 0x10000>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "peripheral", + "host", + "otg"; + maximum-speed = "high-speed"; + dr_mode = "otg"; + phys = <&usb1_phy>; + phy-names = "usb2-phy"; + }; + }; + + usb1_phy: phy@4110000 { + compatible = "ti,am654-usb2", "ti,omap-usb2"; + reg = <0x0 0x4110000 0x0 0x54>; + syscon-phy-power = <&scm_conf 0x4020>; + clocks = <&k3_clks 152 0>, <&k3_clks 152 1>; + clock-names = "wkupclk", "refclk"; + #phy-cells = <0>; + }; }; diff --git a/dts/src/arm64/ti/k3-am65-mcu.dtsi b/dts/src/arm64/ti/k3-am65-mcu.dtsi index 593f718e8f..6f7d2b316d 100644 --- a/dts/src/arm64/ti/k3-am65-mcu.dtsi +++ b/dts/src/arm64/ti/k3-am65-mcu.dtsi @@ -57,4 +57,34 @@ #address-cells = <1>; #size-cells = <0>; }; + + tscadc0: tscadc@40200000 { + compatible = "ti,am654-tscadc", "ti,am3359-tscadc"; + reg = <0x0 0x40200000 0x0 0x1000>; + interrupts = <GIC_SPI 580 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 0 2>; + assigned-clocks = <&k3_clks 0 2>; + assigned-clock-rates = <60000000>; + clock-names = "adc_tsc_fck"; + + adc { + #io-channel-cells = <1>; + compatible = "ti,am654-adc", "ti,am3359-adc"; + }; + }; + + tscadc1: tscadc@40210000 { + compatible = "ti,am654-tscadc", "ti,am3359-tscadc"; + reg = <0x0 0x40210000 0x0 0x1000>; + interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 1 2>; + assigned-clocks = <&k3_clks 1 2>; + assigned-clock-rates = <60000000>; + clock-names = "adc_tsc_fck"; + + adc { + #io-channel-cells = <1>; + compatible = "ti,am654-adc", "ti,am3359-adc"; + }; + }; }; diff --git a/dts/src/arm64/ti/k3-am654-base-board.dts b/dts/src/arm64/ti/k3-am654-base-board.dts index e41fc3a598..cf1aa276a1 100644 --- a/dts/src/arm64/ti/k3-am654-base-board.dts +++ b/dts/src/arm64/ti/k3-am654-base-board.dts @@ -69,6 +69,29 @@ AM65X_IOPAD(0x01bc, PIN_OUTPUT, 0) /* (AG13) SPI0_CS0 */ >; }; + + main_mmc0_pins_default: main-mmc0-pins-default { + pinctrl-single,pins = < + AM65X_IOPAD(0x01a8, PIN_INPUT_PULLDOWN, 0) /* (B25) MMC0_CLK */ + AM65X_IOPAD(0x01ac, PIN_INPUT_PULLUP, 0) /* (B27) MMC0_CMD */ + AM65X_IOPAD(0x01a4, PIN_INPUT_PULLUP, 0) /* (A26) MMC0_DAT0 */ + AM65X_IOPAD(0x01a0, PIN_INPUT_PULLUP, 0) /* (E25) MMC0_DAT1 */ + AM65X_IOPAD(0x019c, PIN_INPUT_PULLUP, 0) /* (C26) MMC0_DAT2 */ + AM65X_IOPAD(0x0198, PIN_INPUT_PULLUP, 0) /* (A25) MMC0_DAT3 */ + AM65X_IOPAD(0x0194, PIN_INPUT_PULLUP, 0) /* (E24) MMC0_DAT4 */ + AM65X_IOPAD(0x0190, PIN_INPUT_PULLUP, 0) /* (A24) MMC0_DAT5 */ + AM65X_IOPAD(0x018c, PIN_INPUT_PULLUP, 0) /* (B26) MMC0_DAT6 */ + AM65X_IOPAD(0x0188, PIN_INPUT_PULLUP, 0) /* (D25) MMC0_DAT7 */ + AM65X_IOPAD(0x01b4, PIN_INPUT_PULLUP, 0) /* (A23) MMC0_SDCD */ + AM65X_IOPAD(0x01b0, PIN_INPUT, 0) /* (C25) MMC0_DS */ + >; + }; + + usb1_pins_default: usb1_pins_default { + pinctrl-single,pins = < + AM65X_IOPAD(0x02c0, PIN_OUTPUT, 0) /* (AC8) USB1_DRVVBUS */ + >; + }; }; &main_pmx1 { @@ -163,3 +186,45 @@ #size-cells= <1>; }; }; + +&sdhci0 { + pinctrl-names = "default"; + pinctrl-0 = <&main_mmc0_pins_default>; + bus-width = <8>; + non-removable; + ti,driver-strength-ohm = <50>; +}; + +&dwc3_1 { + status = "okay"; +}; + +&usb1_phy { + status = "okay"; +}; + +&usb1 { + pinctrl-names = "default"; + pinctrl-0 = <&usb1_pins_default>; + dr_mode = "otg"; +}; + +&dwc3_0 { + status = "disabled"; +}; + +&usb0_phy { + status = "disabled"; +}; + +&tscadc0 { + adc { + ti,adc-channels = <0 1 2 3 4 5 6 7>; + }; +}; + +&tscadc1 { + adc { + ti,adc-channels = <0 1 2 3 4 5 6 7>; + }; +}; diff --git a/dts/src/arm64/ti/k3-am654.dtsi b/dts/src/arm64/ti/k3-am654.dtsi index 2affa6f661..b221abf43a 100644 --- a/dts/src/arm64/ti/k3-am654.dtsi +++ b/dts/src/arm64/ti/k3-am654.dtsi @@ -34,7 +34,7 @@ }; cpu0: cpu@0 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x000>; device_type = "cpu"; enable-method = "psci"; @@ -48,7 +48,7 @@ }; cpu1: cpu@1 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x001>; device_type = "cpu"; enable-method = "psci"; @@ -62,7 +62,7 @@ }; cpu2: cpu@100 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x100>; device_type = "cpu"; enable-method = "psci"; @@ -76,7 +76,7 @@ }; cpu3: cpu@101 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x101>; device_type = "cpu"; enable-method = "psci"; diff --git a/dts/src/arm64/xilinx/zynqmp-zcu100-revC.dts b/dts/src/arm64/xilinx/zynqmp-zcu100-revC.dts index 13a0a028df..e5699d0d91 100644 --- a/dts/src/arm64/xilinx/zynqmp-zcu100-revC.dts +++ b/dts/src/arm64/xilinx/zynqmp-zcu100-revC.dts @@ -101,6 +101,7 @@ sdio_pwrseq: sdio-pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&gpio 7 GPIO_ACTIVE_LOW>; /* WIFI_EN */ + post-power-on-delay-ms = <10>; }; }; diff --git a/dts/src/arm64/xilinx/zynqmp.dtsi b/dts/src/arm64/xilinx/zynqmp.dtsi index fa4fd777d9..9aa67340a4 100644 --- a/dts/src/arm64/xilinx/zynqmp.dtsi +++ b/dts/src/arm64/xilinx/zynqmp.dtsi @@ -22,7 +22,7 @@ #size-cells = <0>; cpu0: cpu@0 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; device_type = "cpu"; enable-method = "psci"; operating-points-v2 = <&cpu_opp_table>; @@ -31,7 +31,7 @@ }; cpu1: cpu@1 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; device_type = "cpu"; enable-method = "psci"; reg = <0x1>; @@ -40,7 +40,7 @@ }; cpu2: cpu@2 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; device_type = "cpu"; enable-method = "psci"; reg = <0x2>; @@ -49,7 +49,7 @@ }; cpu3: cpu@3 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; device_type = "cpu"; enable-method = "psci"; reg = <0x3>; diff --git a/dts/src/arm64/zte/zx296718.dtsi b/dts/src/arm64/zte/zx296718.dtsi index 6eef647610..cc54837ff4 100644 --- a/dts/src/arm64/zte/zx296718.dtsi +++ b/dts/src/arm64/zte/zx296718.dtsi @@ -86,7 +86,7 @@ cpu0: cpu@0 { device_type = "cpu"; - compatible = "arm,cortex-a53","arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x0>; enable-method = "psci"; clocks = <&topcrm A53_GATE>; @@ -95,7 +95,7 @@ cpu1: cpu@1 { device_type = "cpu"; - compatible = "arm,cortex-a53","arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x1>; enable-method = "psci"; clocks = <&topcrm A53_GATE>; @@ -104,7 +104,7 @@ cpu2: cpu@2 { device_type = "cpu"; - compatible = "arm,cortex-a53","arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x2>; enable-method = "psci"; clocks = <&topcrm A53_GATE>; @@ -113,7 +113,7 @@ cpu3: cpu@3 { device_type = "cpu"; - compatible = "arm,cortex-a53","arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x3>; enable-method = "psci"; clocks = <&topcrm A53_GATE>; diff --git a/dts/src/mips/cavium-octeon/octeon_3xxx.dts b/dts/src/mips/cavium-octeon/octeon_3xxx.dts index 0fa3dd1819..dda0559cef 100644 --- a/dts/src/mips/cavium-octeon/octeon_3xxx.dts +++ b/dts/src/mips/cavium-octeon/octeon_3xxx.dts @@ -180,14 +180,28 @@ ethernet@0 { phy-handle = <&phy2>; cavium,alt-phy-handle = <&phy100>; + rx-delay = <0>; + tx-delay = <0>; + fixed-link { + speed = <1000>; + full-duplex; + }; }; ethernet@1 { phy-handle = <&phy3>; cavium,alt-phy-handle = <&phy101>; + rx-delay = <0>; + tx-delay = <0>; + fixed-link { + speed = <1000>; + full-duplex; + }; }; ethernet@2 { phy-handle = <&phy4>; cavium,alt-phy-handle = <&phy102>; + rx-delay = <0>; + tx-delay = <0>; }; ethernet@3 { compatible = "cavium,octeon-3860-pip-port"; diff --git a/dts/src/mips/cavium-octeon/ubnt_e100.dts b/dts/src/mips/cavium-octeon/ubnt_e100.dts index 243e5dc444..962f37fbc7 100644 --- a/dts/src/mips/cavium-octeon/ubnt_e100.dts +++ b/dts/src/mips/cavium-octeon/ubnt_e100.dts @@ -33,12 +33,18 @@ interface@0 { ethernet@0 { phy-handle = <&phy7>; + rx-delay = <0>; + tx-delay = <0x10>; }; ethernet@1 { phy-handle = <&phy6>; + rx-delay = <0>; + tx-delay = <0x10>; }; ethernet@2 { phy-handle = <&phy5>; + rx-delay = <0>; + tx-delay = <0x10>; }; }; }; diff --git a/dts/src/powerpc/akebono.dts b/dts/src/powerpc/akebono.dts index 8a7a10139b..cd9d66041a 100644 --- a/dts/src/powerpc/akebono.dts +++ b/dts/src/powerpc/akebono.dts @@ -40,7 +40,7 @@ d-cache-size = <32768>; dcr-controller; dcr-access-method = "native"; - status = "ok"; + status = "okay"; }; cpu@1 { device_type = "cpu"; diff --git a/dts/src/powerpc/bluestone.dts b/dts/src/powerpc/bluestone.dts index b0b26d8d68..64eaf7e09d 100644 --- a/dts/src/powerpc/bluestone.dts +++ b/dts/src/powerpc/bluestone.dts @@ -109,7 +109,7 @@ OCM: ocm@400040000 { compatible = "ibm,ocm"; - status = "ok"; + status = "okay"; cell-index = <1>; /* configured in U-Boot */ reg = <4 0x00040000 0x8000>; /* 32K */ diff --git a/dts/src/powerpc/currituck.dts b/dts/src/powerpc/currituck.dts index a04a4fcfde..b6d87b9c2c 100644 --- a/dts/src/powerpc/currituck.dts +++ b/dts/src/powerpc/currituck.dts @@ -39,7 +39,7 @@ d-cache-size = <32768>; dcr-controller; dcr-access-method = "native"; - status = "ok"; + status = "okay"; }; cpu@1 { device_type = "cpu"; diff --git a/dts/src/powerpc/iss4xx-mpic.dts b/dts/src/powerpc/iss4xx-mpic.dts index f7063198b2..c9f90f1a9c 100644 --- a/dts/src/powerpc/iss4xx-mpic.dts +++ b/dts/src/powerpc/iss4xx-mpic.dts @@ -43,7 +43,7 @@ d-cache-size = <32768>; dcr-controller; dcr-access-method = "native"; - status = "ok"; + status = "okay"; }; cpu@1 { device_type = "cpu"; diff --git a/dts/src/powerpc/wii.dts b/dts/src/powerpc/wii.dts index 104b1d6d56..c406bdb4f3 100644 --- a/dts/src/powerpc/wii.dts +++ b/dts/src/powerpc/wii.dts @@ -14,6 +14,7 @@ /dts-v1/; #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> /* * This is commented-out for now. @@ -187,6 +188,11 @@ "DEBUG0", "DEBUG1", "DEBUG2", "DEBUG3", "DEBUG4", "DEBUG5", "DEBUG6", "DEBUG7"; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <10>; + interrupt-parent = <&PIC1>; + /* * This is commented out while a standard binding * for i2c over gpio is defined. @@ -235,5 +241,21 @@ panic-indicator; }; }; + + gpio-keys { + compatible = "gpio-keys"; + + power { + label = "Power Button"; + gpios = <&GPIO 0 GPIO_ACTIVE_HIGH>; + linux,code = <KEY_POWER>; + }; + + eject { + label = "Eject Button"; + gpios = <&GPIO 6 GPIO_ACTIVE_HIGH>; + linux,code = <KEY_EJECTCD>; + }; + }; }; diff --git a/firmware/Makefile b/firmware/Makefile index f238ce2538..306c006e23 100644 --- a/firmware/Makefile +++ b/firmware/Makefile @@ -11,6 +11,8 @@ firmware-$(CONFIG_FIRMWARE_IMX_LPDDR4_PMU_TRAIN) += \ firmware-$(CONFIG_FIRMWARE_IMX8MQ_ATF) += imx8mq-bl31.bin +firmware-$(CONFIG_DRIVER_NET_FSL_FMAN) += fsl_fman_ucode_ls1046_r1.0_106_4_18.bin + # Create $(fwabs) from $(CONFIG_EXTRA_FIRMWARE_DIR) -- if it doesn't have a # leading /, it's relative to $(srctree). fwdir := $(subst $(quote),,$(CONFIG_EXTRA_FIRMWARE_DIR)) diff --git a/fs/Kconfig b/fs/Kconfig index 76a3846929..e3a95321c7 100644 --- a/fs/Kconfig +++ b/fs/Kconfig @@ -25,7 +25,7 @@ config FS_CRAMFS select ZLIB prompt "cramfs support" -source fs/ext4/Kconfig +source "fs/ext4/Kconfig" config FS_RAMFS bool @@ -70,8 +70,8 @@ config FS_EFIVARFS help This filesystem driver provides access to EFI variables. -source fs/fat/Kconfig -source fs/ubifs/Kconfig +source "fs/fat/Kconfig" +source "fs/ubifs/Kconfig" config FS_BPKFS bool @@ -106,8 +106,8 @@ config FS_SMHFS located on a debugging host connected to the target running Barebox -source fs/pstore/Kconfig -source fs/squashfs/Kconfig +source "fs/pstore/Kconfig" +source "fs/squashfs/Kconfig" config FS_RATP bool diff --git a/fs/bpkfs.c b/fs/bpkfs.c index 414108befe..8fc4df65de 100644 --- a/fs/bpkfs.c +++ b/fs/bpkfs.c @@ -455,9 +455,9 @@ static int bpkfs_probe(struct device_d *dev) list_add_tail(&d->list, &h->list_data); priv->nb_data_entries++; - ret = lseek(fd, d->size, SEEK_CUR); - if (ret < 0) { + if (lseek(fd, d->size, SEEK_CUR) != d->size) { dev_err(dev, "could not seek: %s\n", errno_str()); + ret = -errno; goto err; } diff --git a/fs/pstore/Kconfig b/fs/pstore/Kconfig index 0e042cb162..30c2de19c8 100644 --- a/fs/pstore/Kconfig +++ b/fs/pstore/Kconfig @@ -8,6 +8,12 @@ menuconfig FS_PSTORE if FS_PSTORE +config FS_PSTORE_CONSOLE + bool + prompt "Log console messages" + help + When the option is enabled, pstore will log console messages. + config FS_PSTORE_RAMOOPS bool depends on RELOCATABLE diff --git a/fs/pstore/fs.c b/fs/pstore/fs.c index 9a7e0b5526..e9c7ae7adb 100644 --- a/fs/pstore/fs.c +++ b/fs/pstore/fs.c @@ -52,68 +52,71 @@ struct pstore_private { * Load it up with "size" bytes of data from "buf". * Set the mtime & ctime to the date that this record was originally stored. */ -int pstore_mkfile(enum pstore_type_id type, char *psname, u64 id, int count, - char *data, bool compressed, size_t size, - struct pstore_info *psi) +int pstore_mkfile(struct pstore_record *record) { struct pstore_private *private, *pos; + size_t size = record->size; list_for_each_entry(pos, &allpstore, list) { - if (pos->type == type && pos->id == id && pos->psi == psi) + if (pos->type == record->type && + pos->id == record->id && + pos->psi == record->psi) return -EEXIST; } private = xzalloc(sizeof(*private) + size); - private->type = type; - private->id = id; - private->count = count; - private->psi = psi; + private->type = record->type; + private->id = record->id; + private->count = record->count; + private->psi = record->psi; - switch (type) { + switch (record->type) { case PSTORE_TYPE_DMESG: scnprintf(private->name, sizeof(private->name), - "dmesg-%s-%lld%s", psname, id, - compressed ? ".enc.z" : ""); + "dmesg-%s-%lld%s", record->psi->name, record->id, + record->compressed ? ".enc.z" : ""); break; case PSTORE_TYPE_CONSOLE: scnprintf(private->name, sizeof(private->name), - "console-%s-%lld", psname, id); + "console-%s-%lld", record->psi->name, record->id); break; case PSTORE_TYPE_FTRACE: scnprintf(private->name, sizeof(private->name), - "ftrace-%s-%lld", psname, id); + "ftrace-%s-%lld", record->psi->name, record->id); break; case PSTORE_TYPE_MCE: scnprintf(private->name, sizeof(private->name), - "mce-%s-%lld", psname, id); + "mce-%s-%lld", record->psi->name, record->id); break; case PSTORE_TYPE_PPC_RTAS: scnprintf(private->name, sizeof(private->name), - "rtas-%s-%lld", psname, id); + "rtas-%s-%lld", record->psi->name, record->id); break; case PSTORE_TYPE_PPC_OF: scnprintf(private->name, sizeof(private->name), - "powerpc-ofw-%s-%lld", psname, id); + "powerpc-ofw-%s-%lld", record->psi->name, record->id); break; case PSTORE_TYPE_PPC_COMMON: scnprintf(private->name, sizeof(private->name), - "powerpc-common-%s-%lld", psname, id); + "powerpc-common-%s-%lld", record->psi->name, + record->id); break; case PSTORE_TYPE_PMSG: scnprintf(private->name, sizeof(private->name), - "pmsg-%s-%lld", psname, id); + "pmsg-%s-%lld", record->psi->name, record->id); break; case PSTORE_TYPE_UNKNOWN: scnprintf(private->name, sizeof(private->name), - "unknown-%s-%lld", psname, id); + "unknown-%s-%lld", record->psi->name, record->id); break; default: scnprintf(private->name, sizeof(private->name), - "type%d-%s-%lld", type, psname, id); + "type%d-%s-%lld", record->type, record->psi->name, + record->id); break; } - memcpy(private->data, data, size); + memcpy(private->data, record->buf, size); private->size = size; list_add(&private->list, &allpstore); diff --git a/fs/pstore/internal.h b/fs/pstore/internal.h index 0a8df1f4e2..6b507e4bd3 100644 --- a/fs/pstore/internal.h +++ b/fs/pstore/internal.h @@ -11,9 +11,7 @@ extern struct pstore_info *psinfo; extern void pstore_set_kmsg_bytes(int); extern void pstore_get_records(int); -extern int pstore_mkfile(enum pstore_type_id, char *psname, u64 id, - int count, char *data, bool compressed, - size_t size, struct pstore_info *psi); +extern int pstore_mkfile(struct pstore_record *record); extern int pstore_is_mounted(void); #endif diff --git a/fs/pstore/platform.c b/fs/pstore/platform.c index 963ecafef8..755363c309 100644 --- a/fs/pstore/platform.c +++ b/fs/pstore/platform.c @@ -25,6 +25,7 @@ #include <linux/kernel.h> #include <linux/spinlock.h> #include <linux/mutex.h> +#include <console.h> #include <malloc.h> #include <printk.h> #include <module.h> @@ -43,14 +44,83 @@ void pstore_set_kmsg_bytes(int bytes) kmsg_bytes = bytes; } -static int pstore_write_compat(enum pstore_type_id type, - enum kmsg_dump_reason reason, - u64 *id, unsigned int part, int count, - bool compressed, size_t size, - struct pstore_info *psi) +#ifdef CONFIG_FS_PSTORE_CONSOLE +static void pstore_console_write(const char *s, unsigned c) { - return psi->write_buf(type, reason, id, part, psinfo->buf, compressed, - size, psi); + const char *e = s + c; + + while (s < e) { + struct pstore_record record = { + .type = PSTORE_TYPE_CONSOLE, + .psi = psinfo, + }; + + if (c > psinfo->bufsize) + c = psinfo->bufsize; + + record.buf = (char *)s; + record.size = c; + psinfo->write_buf(PSTORE_TYPE_CONSOLE, 0, &record.id, 0, + record.buf, 0, record.size, psinfo); + s += c; + c = e - s; + } +} + +static int pstore_console_puts(struct console_device *cdev, const char *s) +{ + pstore_console_write(s, strlen(s)); + return strlen(s); +} + +static void pstore_console_putc(struct console_device *cdev, char c) +{ + const char s[1] = { c }; + + pstore_console_write(s, 1); +} + +static void pstore_console_capture_log(void) +{ + struct log_entry *log; + + list_for_each_entry(log, &barebox_logbuf, list) + pstore_console_write(log->msg, strlen(log->msg)); +} + +static struct console_device *pstore_cdev; + +static void pstore_register_console(void) +{ + struct console_device *cdev; + int ret; + + cdev = xzalloc(sizeof(struct console_device)); + pstore_cdev = cdev; + + cdev->puts = pstore_console_puts; + cdev->putc = pstore_console_putc; + cdev->devname = "pstore"; + cdev->devid = DEVICE_ID_SINGLE; + + ret = console_register(cdev); + if (ret) + pr_err("registering failed with %s\n", strerror(-ret)); + + pstore_console_capture_log(); + + console_set_active(pstore_cdev, CONSOLE_STDOUT); +} +#else +static void pstore_register_console(void) {} +#endif + +static int pstore_write_compat(struct pstore_record *record) +{ + return record->psi->write_buf(record->type, record->reason, + &record->id, record->part, + psinfo->buf, record->compressed, + record->size, record->psi); } /* @@ -81,6 +151,8 @@ int pstore_register(struct pstore_info *psi) pstore_get_records(0); + pstore_register_console(); + pr_info("Registered %s as persistent store backend\n", psi->name); return 0; @@ -96,13 +168,8 @@ EXPORT_SYMBOL_GPL(pstore_register); void pstore_get_records(int quiet) { struct pstore_info *psi = psinfo; - char *buf = NULL; - ssize_t size; - u64 id; - int count; - enum pstore_type_id type; + struct pstore_record record = { .psi = psi, }; int failed = 0, rc; - bool compressed; int unzipped_len = -1; if (!psi) @@ -112,22 +179,24 @@ void pstore_get_records(int quiet) if (psi->open && psi->open(psi)) goto out; - while ((size = psi->read(&id, &type, &count, &buf, &compressed, - psi)) > 0) { - if (compressed && (type == PSTORE_TYPE_DMESG)) { + while ((record.size = psi->read(&record)) > 0) { + if (record.compressed && + record.type == PSTORE_TYPE_DMESG) { pr_err("barebox does not have ramoops compression support\n"); continue; } - rc = pstore_mkfile(type, psi->name, id, count, buf, - compressed, (size_t)size, psi); + rc = pstore_mkfile(&record); if (unzipped_len < 0) { /* Free buffer other than big oops */ - kfree(buf); - buf = NULL; + kfree(record.buf); + record.buf = NULL; } else unzipped_len = -1; if (rc && (rc != -EEXIST || !quiet)) failed++; + + memset(&record, 0, sizeof(record)); + record.psi = psi; } if (psi->close) psi->close(psi); diff --git a/fs/pstore/ram.c b/fs/pstore/ram.c index fdd92a60a5..734d0c3c1d 100644 --- a/fs/pstore/ram.c +++ b/fs/pstore/ram.c @@ -36,6 +36,8 @@ #include <globalvar.h> #include <init.h> #include <common.h> +#include <of.h> +#include <of_address.h> #define RAMOOPS_KERNMSG_HDR "====" #define MIN_MEM_SIZE 4096UL @@ -126,27 +128,32 @@ static bool prz_ok(struct persistent_ram_zone *prz) persistent_ram_ecc_string(prz, NULL, 0)); } -static ssize_t ramoops_pstore_read(u64 *id, enum pstore_type_id *type, - int *count, char **buf, bool *compressed, - struct pstore_info *psi) +static ssize_t ramoops_pstore_read(struct pstore_record *record) { ssize_t size; ssize_t ecc_notice_size; - struct ramoops_context *cxt = psi->data; + struct ramoops_context *cxt = record->psi->data; struct persistent_ram_zone *prz; + record->compressed = false; + prz = ramoops_get_next_prz(cxt->przs, &cxt->dump_read_cnt, - cxt->max_dump_cnt, id, type, + cxt->max_dump_cnt, &record->id, + &record->type, PSTORE_TYPE_DMESG, 0); if (!prz_ok(prz)) prz = ramoops_get_next_prz(&cxt->cprz, &cxt->console_read_cnt, - 1, id, type, PSTORE_TYPE_CONSOLE, 0); + 1, &record->id, &record->type, + PSTORE_TYPE_CONSOLE, 0); + if (!prz_ok(prz)) prz = ramoops_get_next_prz(&cxt->fprz, &cxt->ftrace_read_cnt, - 1, id, type, PSTORE_TYPE_FTRACE, 0); + 1, &record->id, &record->type, + PSTORE_TYPE_FTRACE, 0); if (!prz_ok(prz)) prz = ramoops_get_next_prz(&cxt->mprz, &cxt->pmsg_read_cnt, - 1, id, type, PSTORE_TYPE_PMSG, 0); + 1, &record->id, &record->type, + PSTORE_TYPE_PMSG, 0); if (!prz_ok(prz)) return 0; @@ -158,12 +165,12 @@ static ssize_t ramoops_pstore_read(u64 *id, enum pstore_type_id *type, /* ECC correction notice */ ecc_notice_size = persistent_ram_ecc_string(prz, NULL, 0); - *buf = kmalloc(size + ecc_notice_size + 1, GFP_KERNEL); - if (*buf == NULL) + record->buf = kmalloc(size + ecc_notice_size + 1, GFP_KERNEL); + if (record->buf == NULL) return -ENOMEM; - memcpy(*buf, (char *)persistent_ram_old(prz), size); - persistent_ram_ecc_string(prz, *buf + size, ecc_notice_size + 1); + memcpy(record->buf, (char *)persistent_ram_old(prz), size); + persistent_ram_ecc_string(prz, record->buf + size, ecc_notice_size + 1); return size + ecc_notice_size; } @@ -272,91 +279,278 @@ static void ramoops_free_przs(struct ramoops_context *cxt) kfree(cxt->przs); } -static int ramoops_init_przs(struct ramoops_context *cxt, phys_addr_t *paddr, - size_t dump_mem_sz) +static int ramoops_init_przs(const char *name, + struct ramoops_context *cxt, + struct persistent_ram_zone ***przs, + phys_addr_t *paddr, size_t mem_sz, + ssize_t record_size, + unsigned int *cnt, u32 sig, u32 flags) { int err = -ENOMEM; int i; + size_t zone_sz; + struct persistent_ram_zone **prz_ar; - if (!cxt->record_size) + /* Allocate nothing for 0 mem_sz or 0 record_size. */ + if (mem_sz == 0 || record_size == 0) { + *cnt = 0; return 0; + } - if (*paddr + dump_mem_sz - cxt->phys_addr > cxt->size) { - pr_err("no room for dumps\n"); - return -ENOMEM; + /* + * If we have a negative record size, calculate it based on + * mem_sz / *cnt. If we have a positive record size, calculate + * cnt from mem_sz / record_size. + */ + if (record_size < 0) { + if (*cnt == 0) + return 0; + record_size = mem_sz / *cnt; + if (record_size == 0) { + pr_err("%s record size == 0 (%zu / %u)\n", + name, mem_sz, *cnt); + goto fail; + } + } else { + *cnt = mem_sz / record_size; + if (*cnt == 0) { + pr_err("%s record count == 0 (%zu / %zu)\n", + name, mem_sz, record_size); + goto fail; + } } - cxt->max_dump_cnt = dump_mem_sz / cxt->record_size; - if (!cxt->max_dump_cnt) - return -ENOMEM; + if (*paddr + mem_sz - cxt->phys_addr > cxt->size) { + pr_err("no room for %s mem region (0x%zx@0x%llx) in (0x%lx@0x%llx)\n", + name, + mem_sz, (unsigned long long)*paddr, + cxt->size, (unsigned long long)cxt->phys_addr); + goto fail; + } - cxt->przs = kzalloc(sizeof(*cxt->przs) * cxt->max_dump_cnt, - GFP_KERNEL); - if (!cxt->przs) { - pr_err("failed to initialize a prz array for dumps\n"); - goto fail_prz; + zone_sz = mem_sz / *cnt; + if (!zone_sz) { + pr_err("%s zone size == 0\n", name); + goto fail; } - for (i = 0; i < cxt->max_dump_cnt; i++) { - size_t sz = cxt->record_size; - - cxt->przs[i] = persistent_ram_new(*paddr, sz, 0, - &cxt->ecc_info, - cxt->memtype); - if (IS_ERR(cxt->przs[i])) { - err = PTR_ERR(cxt->przs[i]); - pr_err("failed to request mem region (0x%zx@0x%llx): %d\n", - sz, (unsigned long long)*paddr, err); - goto fail_prz; + prz_ar = kcalloc(*cnt, sizeof(**przs), GFP_KERNEL); + if (!prz_ar) + goto fail; + + for (i = 0; i < *cnt; i++) { + char *label; + + if (*cnt == 1) + label = basprintf("ramoops:%s", name); + else + label = basprintf("ramoops:%s(%d/%d)", + name, i, *cnt - 1); + prz_ar[i] = persistent_ram_new(*paddr, zone_sz, sig, + &cxt->ecc_info, + cxt->memtype, label); + if (IS_ERR(prz_ar[i])) { + err = PTR_ERR(prz_ar[i]); + pr_err("failed to request %s mem region (0x%zx@0x%llx): %d\n", + name, record_size, + (unsigned long long)*paddr, err); + + while (i > 0) { + i--; + persistent_ram_free(prz_ar[i]); + } + kfree(prz_ar); + goto fail; } - *paddr += sz; + *paddr += zone_sz; } + *przs = prz_ar; return 0; -fail_prz: - ramoops_free_przs(cxt); + +fail: + *cnt = 0; return err; } -static int ramoops_init_prz(struct ramoops_context *cxt, +static int ramoops_init_prz(const char *name, + struct ramoops_context *cxt, struct persistent_ram_zone **prz, phys_addr_t *paddr, size_t sz, u32 sig) { + char *label; + if (!sz) return 0; if (*paddr + sz - cxt->phys_addr > cxt->size) { - pr_err("no room for mem region (0x%zx@0x%llx) in (0x%lx@0x%llx)\n", - sz, (unsigned long long)*paddr, + pr_err("no room for %s mem region (0x%zx@0x%llx) in (0x%lx@0x%llx)\n", + name, sz, (unsigned long long)*paddr, cxt->size, (unsigned long long)cxt->phys_addr); return -ENOMEM; } + label = basprintf("ramoops:%s", name); *prz = persistent_ram_new(*paddr, sz, sig, &cxt->ecc_info, - cxt->memtype); + cxt->memtype, label); if (IS_ERR(*prz)) { int err = PTR_ERR(*prz); - pr_err("failed to request mem region (0x%zx@0x%llx): %d\n", - sz, (unsigned long long)*paddr, err); + pr_err("failed to request %s mem region (0x%zx@0x%llx): %d\n", + name, sz, (unsigned long long)*paddr, err); return err; } +#ifndef CONFIG_FS_PSTORE_RAMOOPS_RO persistent_ram_zap(*prz); +#endif /* CONFIG_FS_PSTORE_RAMOOPS_RO */ *paddr += sz; return 0; } -static int ramoops_probe(struct ramoops_platform_data *pdata) +static int ramoops_parse_dt_size(struct device_d *dev, + const char *propname, u32 *value) +{ + u32 val32 = 0; + int ret; + + ret = of_property_read_u32(dev->device_node, propname, &val32); + if (ret < 0 && ret != -EINVAL) { + dev_err(dev, "failed to parse property %s: %d\n", + propname, ret); + return ret; + } + + if (val32 > INT_MAX) { + dev_err(dev, "%s %u > INT_MAX\n", propname, val32); + return -EOVERFLOW; + } + + *value = val32; + return 0; +} + +static int ramoops_parse_dt(struct device_d *dev, + struct ramoops_platform_data *pdata) +{ + struct device_node *of_node = dev->device_node; + struct resource *res; + u32 value; + int ret; + + res = dev_get_resource(dev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(dev, + "failed to locate DT /reserved-memory resource\n"); + return -EINVAL; + } + + pdata->mem_size = resource_size(res); + pdata->mem_address = res->start; + pdata->mem_type = of_property_read_bool(of_node, "unbuffered"); + pdata->dump_oops = !of_property_read_bool(of_node, "no-dump-oops"); + +#define parse_size(name, field) { \ + ret = ramoops_parse_dt_size(dev, name, &value); \ + if (ret < 0) \ + return ret; \ + field = value; \ + } + + parse_size("record-size", pdata->record_size); + parse_size("console-size", pdata->console_size); + parse_size("ftrace-size", pdata->ftrace_size); + parse_size("pmsg-size", pdata->pmsg_size); + parse_size("ecc-size", pdata->ecc_info.ecc_size); + +#undef parse_size + + return 0; +} + +static int ramoops_of_fixup(struct device_node *root, void *data) +{ + struct ramoops_platform_data *pdata = data; + struct device_node *node; + u32 reg[2]; + int ret; + + node = of_get_child_by_name(root, "reserved-memory"); + if (!node) { + pr_info("Adding reserved-memory node\n"); + node = of_create_node(root, "/reserved-memory"); + if (!node) + return -ENOMEM; + + of_property_write_u32(node, "#address-cells", 1); + of_property_write_u32(node, "#size-cells", 1); + of_new_property(node, "ranges", NULL, 0); + } + + node = of_get_child_by_name(node, "ramoops"); + if (!node) { + pr_info("Adding ramoops node\n"); + node = of_create_node(root, "/reserved-memory/ramoops"); + if (!node) + return -ENOMEM; + } + + ret = of_property_write_string(node, "compatible", "ramoops"); + if (ret) + return ret; + reg[0] = pdata->mem_address; + reg[1] = pdata->mem_size; + ret = of_property_write_u32_array(node, "reg", reg, 2); + if (ret) + return ret; + + ret = of_property_write_bool(node, "unbuffered", pdata->mem_type); + if (ret) + return ret; + ret = of_property_write_bool(node, "no-dump-oops", !pdata->dump_oops); + if (ret) + return ret; + +#define store_size(name, field) { \ + ret = of_property_write_u32(node, name, field); \ + if (ret < 0) \ + return ret; \ + } + + store_size("record-size", pdata->record_size); + store_size("console-size", pdata->console_size); + store_size("ftrace-size", pdata->ftrace_size); + store_size("pmsg-size", pdata->pmsg_size); + store_size("ecc-size", pdata->ecc_info.ecc_size); + +#undef store_size + + return 0; +} + +static int ramoops_probe(struct device_d *dev) { + struct ramoops_platform_data *pdata = dummy_data; struct ramoops_context *cxt = &oops_cxt; size_t dump_mem_sz; phys_addr_t paddr; int err = -EINVAL; char kernelargs[512]; + if (IS_ENABLED(CONFIG_OFTREE) && !pdata) { + pdata = kzalloc(sizeof(*pdata), GFP_KERNEL); + if (!pdata) { + err = -ENOMEM; + goto fail_out; + } + + err = ramoops_parse_dt(dev, pdata); + if (err < 0) + goto fail_out; + } + /* Only a single ramoops area allowed at a time, so fail extra * probes. */ @@ -393,20 +587,24 @@ static int ramoops_probe(struct ramoops_platform_data *pdata) dump_mem_sz = cxt->size - cxt->console_size - cxt->ftrace_size - cxt->pmsg_size; - err = ramoops_init_przs(cxt, &paddr, dump_mem_sz); + err = ramoops_init_przs("dump", cxt, &cxt->przs, &paddr, + dump_mem_sz, cxt->record_size, + &cxt->max_dump_cnt, 0, 0); if (err) goto fail_out; - err = ramoops_init_prz(cxt, &cxt->cprz, &paddr, + err = ramoops_init_prz("console", cxt, &cxt->cprz, &paddr, cxt->console_size, 0); if (err) goto fail_init_cprz; - err = ramoops_init_prz(cxt, &cxt->fprz, &paddr, cxt->ftrace_size, 0); + err = ramoops_init_prz("ftrace", cxt, &cxt->fprz, &paddr, + cxt->ftrace_size, 0); if (err) goto fail_init_fprz; - err = ramoops_init_prz(cxt, &cxt->mprz, &paddr, cxt->pmsg_size, 0); + err = ramoops_init_prz("pmsg", cxt, &cxt->mprz, &paddr, + cxt->pmsg_size, 0); if (err) goto fail_init_mprz; @@ -438,25 +636,27 @@ static int ramoops_probe(struct ramoops_platform_data *pdata) cxt->size, (unsigned long long)cxt->phys_addr, cxt->ecc_info.ecc_size, cxt->ecc_info.block_size); - scnprintf(kernelargs, sizeof(kernelargs), - "ramoops.record_size=0x%x " - "ramoops.console_size=0x%x " - "ramoops.ftrace_size=0x%x " - "ramoops.pmsg_size=0x%x " - "ramoops.mem_address=0x%llx " - "ramoops.mem_size=0x%lx " - "ramoops.ecc=%d", - cxt->record_size, - cxt->console_size, - cxt->ftrace_size, - cxt->pmsg_size, - (unsigned long long)cxt->phys_addr, - mem_size, - ramoops_ecc); - globalvar_add_simple("linux.bootargs.ramoops", kernelargs); - - if (IS_ENABLED(CONFIG_OFTREE)) + if (!IS_ENABLED(CONFIG_OFTREE)) { + scnprintf(kernelargs, sizeof(kernelargs), + "ramoops.record_size=0x%x " + "ramoops.console_size=0x%x " + "ramoops.ftrace_size=0x%x " + "ramoops.pmsg_size=0x%x " + "ramoops.mem_address=0x%llx " + "ramoops.mem_size=0x%lx " + "ramoops.ecc=%d", + cxt->record_size, + cxt->console_size, + cxt->ftrace_size, + cxt->pmsg_size, + (unsigned long long)cxt->phys_addr, + mem_size, + ramoops_ecc); + globalvar_add_simple("linux.bootargs.ramoops", kernelargs); + } else { of_add_reserve_entry(cxt->phys_addr, cxt->phys_addr + mem_size); + of_register_fixup(ramoops_of_fixup, pdata); + } return 0; @@ -472,6 +672,7 @@ fail_init_fprz: fail_init_cprz: ramoops_free_przs(cxt); fail_out: + kfree(pdata); return err; } unsigned long arm_mem_ramoops_get(void); @@ -498,12 +699,39 @@ static void ramoops_register_dummy(void) */ dummy_data->ecc_info.ecc_size = ramoops_ecc == 1 ? 16 : ramoops_ecc; - ramoops_probe(dummy_data); + if (!IS_ENABLED(CONFIG_OFTREE)) + ramoops_probe(NULL); } +static const struct of_device_id ramoops_dt_ids[] = { + { .compatible = "ramoops" }, + { }, +}; + +static struct driver_d ramoops_driver = { + .name = "ramoops", + .probe = ramoops_probe, + .of_compatible = DRV_OF_COMPAT(ramoops_dt_ids), +}; + static int __init ramoops_init(void) { + if (IS_ENABLED(CONFIG_OFTREE)) { + struct device_node *node; + + node = of_get_root_node(); + if (!node) + return 0; + + node = of_get_child_by_name(node, "reserved-memory"); + if (!node) + return 0; + + for_each_matching_node(node, ramoops_dt_ids) + of_platform_device_create(node, NULL); + } + ramoops_register_dummy(); - return 0; + return platform_driver_register(&ramoops_driver); } -postcore_initcall(ramoops_init); +device_initcall(ramoops_init); diff --git a/fs/pstore/ram_core.c b/fs/pstore/ram_core.c index 9de6dc614d..06be47ce53 100644 --- a/fs/pstore/ram_core.c +++ b/fs/pstore/ram_core.c @@ -80,24 +80,23 @@ static void notrace persistent_ram_encode_rs8(struct persistent_ram_zone *prz, uint8_t *data, size_t len, uint8_t *ecc) { int i; - uint16_t par[prz->ecc_info.ecc_size]; /* Initialize the parity buffer */ - memset(par, 0, sizeof(par)); - encode_rs8(prz->rs_decoder, data, len, par, 0); + memset(prz->ecc_info.par, 0, + prz->ecc_info.ecc_size * sizeof(prz->ecc_info.par[0])); + encode_rs8(prz->rs_decoder, data, len, prz->ecc_info.par, 0); for (i = 0; i < prz->ecc_info.ecc_size; i++) - ecc[i] = par[i]; + ecc[i] = prz->ecc_info.par[i]; } static int persistent_ram_decode_rs8(struct persistent_ram_zone *prz, void *data, size_t len, uint8_t *ecc) { int i; - uint16_t par[prz->ecc_info.ecc_size]; for (i = 0; i < prz->ecc_info.ecc_size; i++) - par[i] = ecc[i]; - return decode_rs8(prz->rs_decoder, data, par, len, + prz->ecc_info.par[i] = ecc[i]; + return decode_rs8(prz->rs_decoder, data, prz->ecc_info.par, len, NULL, 0, NULL, 0, NULL); } @@ -210,6 +209,15 @@ static int persistent_ram_init_ecc(struct persistent_ram_zone *prz, return -EINVAL; } + /* allocate workspace instead of using stack VLA */ + prz->ecc_info.par = kmalloc_array(prz->ecc_info.ecc_size, + sizeof(*prz->ecc_info.par), + GFP_KERNEL); + if (!prz->ecc_info.par) { + pr_err("cannot allocate ECC parity workspace\n"); + return -ENOMEM; + } + prz->corrected_bytes = 0; prz->bad_blocks = 0; @@ -322,23 +330,17 @@ void persistent_ram_free_old(struct persistent_ram_zone *prz) prz->old_log_size = 0; } -#ifdef CONFIG_FS_PSTORE_RAMOOPS_RO -void persistent_ram_zap(struct persistent_ram_zone *prz) -{ -} -#else void persistent_ram_zap(struct persistent_ram_zone *prz) { prz->buffer->start = 0; prz->buffer->size = 0; persistent_ram_update_header_ecc(prz); } -#endif /* CONFIG_PSTORE_RAMOOPS_RO */ static int persistent_ram_buffer_map(phys_addr_t start, phys_addr_t size, struct persistent_ram_zone *prz, int memtype) { - prz->res = request_sdram_region("persistent ram", start, size); + prz->res = request_sdram_region(prz->label ?: "ramoops", start, size); if (!prz->res) return -ENOMEM; @@ -393,14 +395,21 @@ void persistent_ram_free(struct persistent_ram_zone *prz) release_sdram_region(prz->res); prz->res = NULL; } + if (prz->rs_decoder) { + free_rs(prz->rs_decoder); + prz->rs_decoder = NULL; + } + kfree(prz->ecc_info.par); + prz->ecc_info.par = NULL; persistent_ram_free_old(prz); + kfree(prz->label); kfree(prz); } struct persistent_ram_zone *persistent_ram_new(phys_addr_t start, size_t size, u32 sig, struct persistent_ram_ecc_info *ecc_info, - unsigned int memtype) + unsigned int memtype, char *label) { struct persistent_ram_zone *prz; int ret = -ENOMEM; @@ -411,6 +420,9 @@ struct persistent_ram_zone *persistent_ram_new(phys_addr_t start, size_t size, goto err; } + /* Initialize general buffer state. */ + prz->label = label; + ret = persistent_ram_buffer_map(start, size, prz, memtype); if (ret) goto err; diff --git a/fs/ramfs.c b/fs/ramfs.c index 3046afef3b..7e7dc7aca9 100644 --- a/fs/ramfs.c +++ b/fs/ramfs.c @@ -43,8 +43,6 @@ struct ramfs_inode { char *symlink; ulong mode; - struct handle_d *handle; - ulong size; struct ramfs_chunk *data; @@ -101,8 +99,6 @@ static struct inode *ramfs_get_inode(struct super_block *sb, const struct inode return inode; } -static int chunks = 0; - static struct ramfs_chunk *ramfs_get_chunk(void) { struct ramfs_chunk *data = malloc(sizeof(struct ramfs_chunk)); @@ -115,7 +111,6 @@ static struct ramfs_chunk *ramfs_get_chunk(void) return NULL; } data->next = NULL; - chunks++; return data; } @@ -124,7 +119,6 @@ static void ramfs_put_chunk(struct ramfs_chunk *data) { free(data->data); free(data); - chunks--; } /* ---------------------------------------------------------------*/ @@ -137,10 +131,8 @@ ramfs_mknod(struct inode *dir, struct dentry *dentry, umode_t mode) if (!inode) return -ENOSPC; - if (inode) { - d_instantiate(dentry, inode); - dget(dentry); /* Extra count - pin the dentry in core */ - } + d_instantiate(dentry, inode); + dget(dentry); /* Extra count - pin the dentry in core */ return 0; } diff --git a/images/Makefile b/images/Makefile index 59b81f9b6d..e525e0d277 100644 --- a/images/Makefile +++ b/images/Makefile @@ -68,6 +68,38 @@ $(obj)/%.pblb: $(obj)/%.pbl FORCE $(call if_changed,objcopy_bin,$(*F)) $(call cmd,check_file_size,$@,$(CONFIG_BAREBOX_MAX_IMAGE_SIZE)) +# +# For each start symbol create three variables containing the +# relevant sizes in the image: +# PBL_CODE_SIZE_$(symbol) - contains the pure code size of the image +# PBL_MEMORY_SIZE_$(symbol) - contains the code size + bss size of the +# image +# PBL_IMAGE_SIZE_$(symbol) - contains the full image size including the +# compressed payload +# + $(eval PBL_CODE_SIZE_$* = \ + $(shell $(srctree)/scripts/extract_symbol_offset pbl_code_size $^)) + $(eval PBL_MEMORY_SIZE_$*= \ + $(shell $(srctree)/scripts/extract_symbol_offset pbl_memory_size $^)) + $(eval PBL_IMAGE_SIZE_$*= \ + $(shell $(srctree)/scripts/extract_symbol_offset pbl_image_size $^)) + +# +# if MAX_PBL_xxx_SIZE_$(symbol) is defined it contains the maximum size the +# code/memory/image for this PBL may get. Check these values. +# + $(if $(MAX_PBL_CODE_SIZE_$*), \ + $(call cmd,check_size, $(PBL_CODE_SIZE_$*), $(MAX_PBL_CODE_SIZE_$*)) \ + ) + + $(if $(MAX_PBL_MEMORY_SIZE_$*), \ + $(call cmd,check_size, $(PBL_MEMORY_SIZE_$*), $(MAX_PBL_MEMORY_SIZE_$*)) \ + ) + + $(if $(MAX_PBL_IMAGE_SIZE_$*), \ + $(call cmd,check_size, $(PBL_IMAGE_SIZE_$*), $(MAX_PBL_IMAGE_SIZE_$*)) \ + ) + $(obj)/%.s: $(obj)/% FORCE $(call if_changed,disasm) @@ -108,11 +140,13 @@ include $(srctree)/images/Makefile.mxs include $(srctree)/images/Makefile.omap3 include $(srctree)/images/Makefile.rockchip include $(srctree)/images/Makefile.socfpga +include $(srctree)/images/Makefile.stm32mp1 include $(srctree)/images/Makefile.tegra include $(srctree)/images/Makefile.vexpress include $(srctree)/images/Makefile.xburst include $(srctree)/images/Makefile.at91 include $(srctree)/images/Makefile.zynqmp +include $(srctree)/images/Makefile.layerscape ifneq ($(pblx-y)$(pblx-),) $(error pblx- has been removed. Please use pblb- instead.) @@ -147,5 +181,5 @@ $(flash-list): $(image-y-path) clean-files := *.pbl *.pblb *.map start_*.imximg *.img barebox.z start_*.kwbimg \ start_*.kwbuartimg *.socfpgaimg *.mlo *.t20img *.t20img.cfg *.t30img \ *.t30img.cfg *.t124img *.t124img.cfg *.mlospi *.mlo *.mxsbs *.mxssd \ - start_*.simximg start_*.usimximg *.imx-sram-img + start_*.simximg start_*.usimximg *.imx-sram-img *.image clean-files += pbl.lds diff --git a/images/Makefile.imx b/images/Makefile.imx index 6ceb76995b..e6f741cdb4 100644 --- a/images/Makefile.imx +++ b/images/Makefile.imx @@ -323,21 +323,6 @@ CFG_start_h100_microsom_i2ex.pblb.imximg = $(board)/solidrun-microsom/flash-head FILE_barebox-auvidea-h100-microsom-i2eX.img = start_h100_microsom_i2ex.pblb.imximg image-$(CONFIG_MACH_SOLIDRUN_MICROSOM) += barebox-auvidea-h100-microsom-i2eX.img -pblb-$(CONFIG_MACH_TECHNEXION_PICO_HOBBIT) += start_imx6ul_pico_hobbit_256mb -CFG_start_imx6ul_pico_hobbit_256mb.pblb.imximg = $(board)/technexion-pico-hobbit/flash-header-imx6ul-pico-hobbit-256.imxcfg -FILE_barebox-imx6ul-pico-hobbit-256mb.img = start_imx6ul_pico_hobbit_256mb.pblb.imximg -image-$(CONFIG_MACH_TECHNEXION_PICO_HOBBIT) += barebox-imx6ul-pico-hobbit-256mb.img - -pblb-$(CONFIG_MACH_TECHNEXION_PICO_HOBBIT) += start_imx6ul_pico_hobbit_512mb -CFG_start_imx6ul_pico_hobbit_512mb.pblb.imximg = $(board)/technexion-pico-hobbit/flash-header-imx6ul-pico-hobbit-512.imxcfg -FILE_barebox-imx6ul-pico-hobbit-512mb.img = start_imx6ul_pico_hobbit_512mb.pblb.imximg -image-$(CONFIG_MACH_TECHNEXION_PICO_HOBBIT) += barebox-imx6ul-pico-hobbit-512mb.img - -pblb-$(CONFIG_MACH_NXP_IMX6ULL_EVK) += start_nxp_imx6ull_evk -CFG_start_nxp_imx6ull_evk.pblb.imximg = $(board)/nxp-imx6ull-evk/flash-header-nxp-imx6ull-evk.imxcfg -FILE_barebox-nxp-imx6ull-evk.img = start_nxp_imx6ull_evk.pblb.imximg -image-$(CONFIG_MACH_NXP_IMX6ULL_EVK) += barebox-nxp-imx6ull-evk.img - pblb-$(CONFIG_MACH_NITROGEN6) += start_imx6q_nitrogen6x_1g CFG_start_imx6q_nitrogen6x_1g.pblb.imximg = $(board)/boundarydevices-nitrogen6/flash-header-nitrogen6q-1g.imxcfg FILE_barebox-boundarydevices-imx6q-nitrogen6x-1g.img = start_imx6q_nitrogen6x_1g.pblb.imximg @@ -463,21 +448,6 @@ CFG_start_phytec_phycore_imx6dl_som_emmc_1gib.pblb.imximg = $(board)/phytec-som- FILE_barebox-phytec-phycore-imx6dl-som-emmc-1gib.img = start_phytec_phycore_imx6dl_som_emmc_1gib.pblb.imximg image-$(CONFIG_MACH_PHYTEC_SOM_IMX6) += barebox-phytec-phycore-imx6dl-som-emmc-1gib.img -pblb-$(CONFIG_MACH_PHYTEC_SOM_IMX6) += start_phytec_phycore_imx6ul_som_512mb -CFG_start_phytec_phycore_imx6ul_som_512mb.pblb.imximg = $(board)/phytec-som-imx6/flash-header-phytec-pcl063-512mb.imxcfg -FILE_barebox-phytec-phycore-imx6ul-512mb.img = start_phytec_phycore_imx6ul_som_512mb.pblb.imximg -image-$(CONFIG_MACH_PHYTEC_SOM_IMX6) += barebox-phytec-phycore-imx6ul-512mb.img - -pblb-$(CONFIG_MACH_PHYTEC_SOM_IMX6) += start_phytec_phycore_imx6ull_som_lc_256mb -CFG_start_phytec_phycore_imx6ull_som_lc_256mb.pblb.imximg = $(board)/phytec-som-imx6/flash-header-phytec-pcl063-256mb.imxcfg -FILE_barebox-phytec-phycore-imx6ull-lc-256mb.img = start_phytec_phycore_imx6ull_som_lc_256mb.pblb.imximg -image-$(CONFIG_MACH_PHYTEC_SOM_IMX6) += barebox-phytec-phycore-imx6ull-lc-256mb.img - -pblb-$(CONFIG_MACH_PHYTEC_SOM_IMX6) += start_phytec_phycore_imx6ull_som_512mb -CFG_start_phytec_phycore_imx6ull_som_512mb.pblb.imximg = $(board)/phytec-som-imx6/flash-header-phytec-pcl063-512mb.imxcfg -FILE_barebox-phytec-phycore-imx6ull-512mb.img = start_phytec_phycore_imx6ull_som_512mb.pblb.imximg -image-$(CONFIG_MACH_PHYTEC_SOM_IMX6) += barebox-phytec-phycore-imx6ull-512mb.img - pblb-$(CONFIG_MACH_KONTRON_SAMX6I) += start_imx6q_samx6i CFG_start_imx6q_samx6i.pblb.imximg = $(board)/kontron-samx6i/flash-header-samx6i-quad.imxcfg FILE_barebox-imx6q-samx6i.img = start_imx6q_samx6i.pblb.imximg @@ -488,16 +458,6 @@ CFG_start_imx6dl_samx6i.pblb.imximg = $(board)/kontron-samx6i/flash-header-samx6 FILE_barebox-imx6dl-samx6i.img = start_imx6dl_samx6i.pblb.imximg image-$(CONFIG_MACH_KONTRON_SAMX6I) += barebox-imx6dl-samx6i.img -pblb-$(CONFIG_MACH_GRINN_LITEBOARD) += start_imx6ul_liteboard_256mb -CFG_start_imx6ul_liteboard_256mb.pblb.imximg = $(board)/grinn-liteboard/flash-header-liteboard-256mb.imxcfg -FILE_barebox-grinn-liteboard-256mb.img = start_imx6ul_liteboard_256mb.pblb.imximg -image-$(CONFIG_MACH_GRINN_LITEBOARD) += barebox-grinn-liteboard-256mb.img - -pblb-$(CONFIG_MACH_GRINN_LITEBOARD) += start_imx6ul_liteboard_512mb -CFG_start_imx6ul_liteboard_512mb.pblb.imximg = $(board)/grinn-liteboard/flash-header-liteboard-512mb.imxcfg -FILE_barebox-grinn-liteboard-512mb.img = start_imx6ul_liteboard_512mb.pblb.imximg -image-$(CONFIG_MACH_GRINN_LITEBOARD) += barebox-grinn-liteboard-512mb.img - pblb-$(CONFIG_MACH_GW_VENTANA) += start_imx6q_gw54xx_1gx64 CFG_start_imx6q_gw54xx_1gx64.pblb.imximg = $(board)/gateworks-ventana/flash-header-ventana-quad-1gx64.imxcfg FILE_barebox-gateworks-imx6q-ventana-1gx64.img = start_imx6q_gw54xx_1gx64.pblb.imximg @@ -513,26 +473,58 @@ CFG_start_advantech_imx6dl_rom_7421.pblb.imximg = $(board)/advantech-mx6/flash-h FILE_barebox-advantech-imx6dl-rom-7421.img = start_advantech_imx6dl_rom_7421.pblb.imximg image-$(CONFIG_MACH_ADVANTECH_ROM_742X) += barebox-advantech-imx6dl-rom-7421.img -pblb-$(CONFIG_MACH_WARP7) += start_imx7s_element14_warp7 -CFG_start_imx7s_element14_warp7.pblb.imximg = $(board)/element14-warp7/flash-header-mx7-warp.imxcfg -FILE_barebox-element14-imx7s-warp7.img = start_imx7s_element14_warp7.pblb.imximg -image-$(CONFIG_MACH_WARP7) += barebox-element14-imx7s-warp7.img +pblb-$(CONFIG_MACH_ZII_RDU2) += start_imx6_zii_rdu2 +CFG_start_imx6_zii_rdu2.pblb.imximg = $(board)/zii-imx6q-rdu2/flash-header-rdu2.imxcfg +FILE_barebox-zii-imx6-rdu2.img = start_imx6_zii_rdu2.pblb.imximg +image-$(CONFIG_MACH_ZII_RDU2) += barebox-zii-imx6-rdu2.img -pblb-$(CONFIG_MACH_PHYTEC_PHYCORE_IMX7) += start_phytec_phycore_imx7 -CFG_start_phytec_phycore_imx7.pblb.imximg = $(board)/phytec-phycore-imx7/flash-header-phytec-phycore-imx7.imxcfg -FILE_barebox-phytec-phycore-imx7.img = start_phytec_phycore_imx7.pblb.imximg -image-$(CONFIG_MACH_PHYTEC_PHYCORE_IMX7) += barebox-phytec-phycore-imx7.img +# ----------------------- i.MX6ul / i.MX6ull based boards -------------- +pblb-$(CONFIG_MACH_GRINN_LITEBOARD) += start_imx6ul_liteboard_256mb +CFG_start_imx6ul_liteboard_256mb.pblb.imximg = $(board)/grinn-liteboard/flash-header-liteboard-256mb.imxcfg +FILE_barebox-grinn-liteboard-256mb.img = start_imx6ul_liteboard_256mb.pblb.imximg +image-$(CONFIG_MACH_GRINN_LITEBOARD) += barebox-grinn-liteboard-256mb.img + +pblb-$(CONFIG_MACH_GRINN_LITEBOARD) += start_imx6ul_liteboard_512mb +CFG_start_imx6ul_liteboard_512mb.pblb.imximg = $(board)/grinn-liteboard/flash-header-liteboard-512mb.imxcfg +FILE_barebox-grinn-liteboard-512mb.img = start_imx6ul_liteboard_512mb.pblb.imximg +image-$(CONFIG_MACH_GRINN_LITEBOARD) += barebox-grinn-liteboard-512mb.img +pblb-$(CONFIG_MACH_NXP_IMX6ULL_EVK) += start_nxp_imx6ull_evk +CFG_start_nxp_imx6ull_evk.pblb.imximg = $(board)/nxp-imx6ull-evk/flash-header-nxp-imx6ull-evk.imxcfg +FILE_barebox-nxp-imx6ull-evk.img = start_nxp_imx6ull_evk.pblb.imximg +image-$(CONFIG_MACH_NXP_IMX6ULL_EVK) += barebox-nxp-imx6ull-evk.img + +pblb-$(CONFIG_MACH_PHYTEC_SOM_IMX6) += start_phytec_phycore_imx6ul_som_512mb +CFG_start_phytec_phycore_imx6ul_som_512mb.pblb.imximg = $(board)/phytec-som-imx6/flash-header-phytec-pcl063-512mb.imxcfg +FILE_barebox-phytec-phycore-imx6ul-512mb.img = start_phytec_phycore_imx6ul_som_512mb.pblb.imximg +image-$(CONFIG_MACH_PHYTEC_SOM_IMX6) += barebox-phytec-phycore-imx6ul-512mb.img + +pblb-$(CONFIG_MACH_PHYTEC_SOM_IMX6) += start_phytec_phycore_imx6ull_som_lc_256mb +CFG_start_phytec_phycore_imx6ull_som_lc_256mb.pblb.imximg = $(board)/phytec-som-imx6/flash-header-phytec-pcl063-256mb.imxcfg +FILE_barebox-phytec-phycore-imx6ull-lc-256mb.img = start_phytec_phycore_imx6ull_som_lc_256mb.pblb.imximg +image-$(CONFIG_MACH_PHYTEC_SOM_IMX6) += barebox-phytec-phycore-imx6ull-lc-256mb.img + +pblb-$(CONFIG_MACH_PHYTEC_SOM_IMX6) += start_phytec_phycore_imx6ull_som_512mb +CFG_start_phytec_phycore_imx6ull_som_512mb.pblb.imximg = $(board)/phytec-som-imx6/flash-header-phytec-pcl063-512mb.imxcfg +FILE_barebox-phytec-phycore-imx6ull-512mb.img = start_phytec_phycore_imx6ull_som_512mb.pblb.imximg +image-$(CONFIG_MACH_PHYTEC_SOM_IMX6) += barebox-phytec-phycore-imx6ull-512mb.img + +pblb-$(CONFIG_MACH_TECHNEXION_PICO_HOBBIT) += start_imx6ul_pico_hobbit_256mb +CFG_start_imx6ul_pico_hobbit_256mb.pblb.imximg = $(board)/technexion-pico-hobbit/flash-header-imx6ul-pico-hobbit-256.imxcfg +FILE_barebox-imx6ul-pico-hobbit-256mb.img = start_imx6ul_pico_hobbit_256mb.pblb.imximg +image-$(CONFIG_MACH_TECHNEXION_PICO_HOBBIT) += barebox-imx6ul-pico-hobbit-256mb.img + +pblb-$(CONFIG_MACH_TECHNEXION_PICO_HOBBIT) += start_imx6ul_pico_hobbit_512mb +CFG_start_imx6ul_pico_hobbit_512mb.pblb.imximg = $(board)/technexion-pico-hobbit/flash-header-imx6ul-pico-hobbit-512.imxcfg +FILE_barebox-imx6ul-pico-hobbit-512mb.img = start_imx6ul_pico_hobbit_512mb.pblb.imximg +image-$(CONFIG_MACH_TECHNEXION_PICO_HOBBIT) += barebox-imx6ul-pico-hobbit-512mb.img + +# ----------------------- vf6xx based boards --------------------------- pblb-$(CONFIG_MACH_VF610_TWR) += start_vf610_twr CFG_start_vf610_twr.pblb.imximg = $(board)/freescale-vf610-twr/flash-header-vf610-twr.imxcfg FILE_barebox-vf610-twr.img = start_vf610_twr.pblb.imximg image-$(CONFIG_MACH_VF610_TWR) += barebox-vf610-twr.img -pblb-$(CONFIG_MACH_ZII_RDU2) += start_imx6_zii_rdu2 -CFG_start_imx6_zii_rdu2.pblb.imximg = $(board)/zii-imx6q-rdu2/flash-header-rdu2.imxcfg -FILE_barebox-zii-imx6-rdu2.img = start_imx6_zii_rdu2.pblb.imximg -image-$(CONFIG_MACH_ZII_RDU2) += barebox-zii-imx6-rdu2.img - pblb-$(CONFIG_MACH_ZII_VF610_DEV) += start_zii_vf610_dev CFG_start_zii_vf610_dev.pblb.imximg = $(board)/zii-vf610-dev/flash-header-zii-vf610-dev.imxcfg FILE_barebox-zii-vf610-dev.img = start_zii_vf610_dev.pblb.imximg @@ -544,6 +536,16 @@ CFG_start_imx7d_sabresd.pblb.imximg = $(board)/freescale-mx7-sabresd/flash-heade FILE_barebox-freescale-mx7-sabresd.img = start_imx7d_sabresd.pblb.imximg image-$(CONFIG_MACH_FREESCALE_MX7_SABRESD) += barebox-freescale-mx7-sabresd.img +pblb-$(CONFIG_MACH_PHYTEC_PHYCORE_IMX7) += start_phytec_phycore_imx7 +CFG_start_phytec_phycore_imx7.pblb.imximg = $(board)/phytec-phycore-imx7/flash-header-phytec-phycore-imx7.imxcfg +FILE_barebox-phytec-phycore-imx7.img = start_phytec_phycore_imx7.pblb.imximg +image-$(CONFIG_MACH_PHYTEC_PHYCORE_IMX7) += barebox-phytec-phycore-imx7.img + +pblb-$(CONFIG_MACH_WARP7) += start_imx7s_element14_warp7 +CFG_start_imx7s_element14_warp7.pblb.imximg = $(board)/element14-warp7/flash-header-mx7-warp.imxcfg +FILE_barebox-element14-imx7s-warp7.img = start_imx7s_element14_warp7.pblb.imximg +image-$(CONFIG_MACH_WARP7) += barebox-element14-imx7s-warp7.img + pblb-$(CONFIG_MACH_ZII_IMX7D_RPU2) += start_zii_imx7d_rpu2 CFG_start_zii_imx7d_rpu2.pblb.imximg = $(board)/zii-imx7d-rpu2/flash-header-zii-imx7d-rpu2.imxcfg FILE_barebox-zii-imx7d-rpu2.img = start_zii_imx7d_rpu2.pblb.imximg @@ -552,15 +554,18 @@ image-$(CONFIG_MACH_ZII_IMX7D_RPU2) += barebox-zii-imx7d-rpu2.img # ----------------------- i.MX8mq based boards -------------------------- pblb-$(CONFIG_MACH_NXP_IMX8MQ_EVK) += start_nxp_imx8mq_evk CFG_start_nxp_imx8mq_evk.pblb.imximg = $(board)/nxp-imx8mq-evk/flash-header-imx8mq-evk.imxcfg +MAX_PBL_MEMORY_SIZE_start_nxp_imx8mq_evk = 0x3f000 FILE_barebox-nxp-imx8mq-evk.img = start_nxp_imx8mq_evk.pblb.imximg image-$(CONFIG_MACH_NXP_IMX8MQ_EVK) += barebox-nxp-imx8mq-evk.img pblb-$(CONFIG_MACH_ZII_IMX8MQ_DEV) += start_zii_imx8mq_dev CFG_start_zii_imx8mq_dev.pblb.imximg = $(board)/zii-imx8mq-dev/flash-header-zii-imx8mq-dev.imxcfg +MAX_PBL_MEMORY_SIZE_start_zii_imx8mq_dev.pbl = 0x3f000 FILE_barebox-zii-imx8mq-dev.img = start_zii_imx8mq_dev.pblb.imximg image-$(CONFIG_MACH_ZII_IMX8MQ_DEV) += barebox-zii-imx8mq-dev.img pblb-$(CONFIG_MACH_PHYTEC_SOM_IMX8MQ) += start_phytec_phycore_imx8mq CFG_start_phytec_phycore_imx8mq.pblb.imximg = $(board)/phytec-som-imx8mq/flash-header-phycore-imx8mq.imxcfg +MAX_PBL_MEMORY_SIZE_start_phytec_phycore_imx8mq.pbl = 0x3f000 FILE_barebox-phytec-phycore-imx8mq.img = start_phytec_phycore_imx8mq.pblb.imximg image-$(CONFIG_MACH_PHYTEC_SOM_IMX8MQ) += barebox-phytec-phycore-imx8mq.img diff --git a/images/Makefile.layerscape b/images/Makefile.layerscape new file mode 100644 index 0000000000..47df3777f0 --- /dev/null +++ b/images/Makefile.layerscape @@ -0,0 +1,59 @@ +# +# barebox image generation Makefile for NXP Layerscape images +# + +lspbl_cfg_cpp_flags = -Wp,-MD,$(depfile) -nostdinc -x assembler-with-cpp \ + -I $(srctree)/include -include include/generated/autoconf.h + +lspbl-rcw-tmp = $(subst $(comma),_,$(dot-target).lspbl_rcw.tmp) +lspbl-pbi-tmp = $(subst $(comma),_,$(dot-target).lspbl_pbi.tmp) + +quiet_cmd_lspbl_image = LSPBL-IMG $@ + cmd_lspbl_image = $(CPP) $(lspbl_cfg_cpp_flags) -o $(lspbl-rcw-tmp) $(word 2,$^) ; \ + $(CPP) $(lspbl_cfg_cpp_flags) -o $(lspbl-pbi-tmp) $(word 3,$^) ; \ + $(objtree)/scripts/pblimage -o $@ -r $(lspbl-rcw-tmp) \ + -m $($(patsubst $(obj)/%.pblb,PBL_CODE_SIZE_%,$<)) -p $(lspbl-pbi-tmp) -i $< + +pbl-$(CONFIG_MACH_LS1046ARDB) += start_ls1046ardb.pbl +$(obj)/barebox-ls1046ardb-2nd.image: $(obj)/start_ls1046ardb.pblb + $(call if_changed,shipped) + +$(obj)/barebox-ls1046ardb-sd.image: $(obj)/start_ls1046ardb.pblb \ + $(board)/ls1046ardb/ls1046ardb_rcw_sd.cfg \ + $(board)/ls1046ardb/ls1046ardb_pbi.cfg + $(call if_changed,lspbl_image) + +$(obj)/barebox-ls1046ardb-emmc.image: $(obj)/start_ls1046ardb.pblb \ + $(board)/ls1046ardb/ls1046ardb_rcw_emmc.cfg \ + $(board)/ls1046ardb/ls1046ardb_pbi.cfg + $(call if_changed,lspbl_image) + +$(obj)/barebox-ls1046ardb-qspi.image: $(obj)/start_ls1046ardb.pblb \ + $(board)/ls1046ardb/ls1046ardb_rcw_qspi.cfg \ + $(board)/ls1046ardb/ls1046ardb_pbi.cfg + $(call if_changed,lspbl_image) + +image-$(CONFIG_MACH_LS1046ARDB) += barebox-ls1046ardb-sd.image barebox-ls1046ardb-qspi.image \ + barebox-ls1046ardb-emmc.image barebox-ls1046ardb-2nd.image + +pbl-$(CONFIG_MACH_TQMLS1046A) += start_tqmls1046a.pbl +$(obj)/barebox-tqmls1046a-2nd.image: $(obj)/start_tqmls1046a.pblb + $(call if_changed,shipped) + +$(obj)/barebox-tqmls1046a-sd.image: $(obj)/start_tqmls1046a.pblb \ + $(board)/tqmls1046a/tqmls1046a_rcw_sd_3333_5559.cfg \ + $(board)/tqmls1046a/tqmls1046a_pbi_sd.cfg + $(call if_changed,lspbl_image) + +$(obj)/barebox-tqmls1046a-emmc.image: $(obj)/start_tqmls1046a.pblb \ + $(board)/tqmls1046a/tqmls1046a_rcw_emmc_3333_5559.cfg \ + $(board)/tqmls1046a/tqmls1046a_pbi_sd.cfg + $(call if_changed,lspbl_image) + +$(obj)/barebox-tqmls1046a-qspi.image: $(obj)/start_tqmls1046a.pblb \ + $(board)/tqmls1046a/tqmls1046a_rcw_qspi_3333_5559.cfg \ + $(board)/tqmls1046a/tqmls1046a_pbi_qspi.cfg + $(call if_changed,lspbl_image) + +image-$(CONFIG_MACH_TQMLS1046A) += barebox-tqmls1046a-sd.image barebox-tqmls1046a-emmc.image \ + barebox-tqmls1046a-qspi.image barebox-tqmls1046a-2nd.image diff --git a/images/Makefile.stm32mp1 b/images/Makefile.stm32mp1 new file mode 100644 index 0000000000..d26231cd92 --- /dev/null +++ b/images/Makefile.stm32mp1 @@ -0,0 +1,8 @@ +# SPDX-License-Identifier: GPL-2.0-or-later +# +# barebox image generation Makefile for STMicroelectronics MP1 +# + +pblb-$(CONFIG_MACH_STM32MP157C_DK2) += start_stm32mp157c_dk2.pblb +FILE_barebox-stm32mp157c-dk2.img = start_stm32mp157c_dk2.pblb +image-$(CONFIG_MACH_STM32MP157C_DK2) += barebox-stm32mp157c-dk2.img diff --git a/include/linux/clk.h b/include/linux/clk.h index ee888dc083..b9c5e0ab04 100644 --- a/include/linux/clk.h +++ b/include/linux/clk.h @@ -285,6 +285,9 @@ static inline void clk_put(struct clk *clk) #include <linux/list.h> #define CLK_SET_RATE_PARENT (1 << 0) /* propagate rate change up one level */ +#define CLK_IGNORE_UNUSED (1 << 3) /* do not gate even if unused */ +#define CLK_SET_RATE_NO_REPARENT (1 << 7) /* don't re-parent on rate change */ +#define CLK_IS_CRITICAL (1 << 11) /* do not gate, ever */ /* parents need enable during gate/ungate, set rate and re-parent */ #define CLK_OPS_PARENT_ENABLE (1 << 12) @@ -310,7 +313,7 @@ struct clk { int enable_count; struct list_head list; const char *name; - const char **parent_names; + const char * const *parent_names; int num_parents; struct clk **parents; @@ -339,8 +342,10 @@ struct clk_divider { #define CLK_DIVIDER_POWER_OF_TWO (1 << 1) #define CLK_DIVIDER_HIWORD_MASK (1 << 3) +#define CLK_DIVIDER_READ_ONLY (1 << 5) #define CLK_MUX_HIWORD_MASK (1 << 2) +#define CLK_MUX_READ_ONLY (1 << 3) /* mux can't be changed */ extern struct clk_ops clk_divider_ops; @@ -350,15 +355,19 @@ unsigned long divider_recalc_rate(struct clk *clk, unsigned long parent_rate, unsigned long flags, unsigned long width); struct clk *clk_divider_alloc(const char *name, const char *parent, - void __iomem *reg, u8 shift, u8 width, unsigned flags); + unsigned clk_flags, void __iomem *reg, + u8 shift, u8 width, unsigned div_flags); void clk_divider_free(struct clk *clk_divider); struct clk *clk_divider(const char *name, const char *parent, - void __iomem *reg, u8 shift, u8 width, unsigned flags); + unsigned clk_flags, void __iomem *reg, u8 shift, + u8 width, unsigned div_flags); struct clk *clk_divider_one_based(const char *name, const char *parent, - void __iomem *reg, u8 shift, u8 width, unsigned flags); -struct clk *clk_divider_table(const char *name, - const char *parent, void __iomem *reg, u8 shift, u8 width, - const struct clk_div_table *table, unsigned flags); + unsigned clk_flags, void __iomem *reg, + u8 shift, u8 width, unsigned div_flags); +struct clk *clk_divider_table(const char *name, const char *parent, + unsigned clk_flags, void __iomem *reg, u8 shift, + u8 width, const struct clk_div_table *table, + unsigned div_flags); struct clk *clk_fixed_factor(const char *name, const char *parent, unsigned int mult, unsigned int div, unsigned flags); @@ -377,19 +386,21 @@ struct clk_mux { void __iomem *reg; int shift; int width; + unsigned flags; }; #define to_clk_mux(_clk) container_of(_clk, struct clk_mux, clk) extern struct clk_ops clk_mux_ops; -struct clk *clk_mux_alloc(const char *name, void __iomem *reg, - u8 shift, u8 width, const char **parents, u8 num_parents, - unsigned flags); +struct clk *clk_mux_alloc(const char *name, unsigned clk_flags, + void __iomem *reg, u8 shift, u8 width, + const char * const *parents, u8 num_parents, + unsigned mux_flags); void clk_mux_free(struct clk *clk_mux); -struct clk *clk_mux(const char *name, void __iomem *reg, - u8 shift, u8 width, const char **parents, u8 num_parents, - unsigned flags); +struct clk *clk_mux(const char *name, unsigned clk_flags, void __iomem *reg, + u8 shift, u8 width, const char * const *parents, + u8 num_parents, unsigned mux_flags); struct clk_gate { struct clk clk; @@ -399,6 +410,8 @@ struct clk_gate { unsigned flags; }; +int clk_gate_is_enabled(struct clk *clk); + #define to_clk_gate(_clk) container_of(_clk, struct clk_gate, clk) extern struct clk_ops clk_gate_ops; @@ -429,7 +442,7 @@ struct clk *clk_lookup(const char *name); void clk_dump(int verbose); struct clk *clk_register_composite(const char *name, - const char **parent_names, int num_parents, + const char * const *parent_names, int num_parents, struct clk *mux_clk, struct clk *rate_clk, struct clk *gate_clk, diff --git a/include/linux/kernel.h b/include/linux/kernel.h index 849c079d0c..b320f7e902 100644 --- a/include/linux/kernel.h +++ b/include/linux/kernel.h @@ -1,36 +1,11 @@ +/* SPDX-License-Identifier: GPL-2.0 */ #ifndef _LINUX_KERNEL_H #define _LINUX_KERNEL_H #include <linux/compiler.h> #include <linux/bug.h> #include <linux/barebox-wrapper.h> - -#define USHRT_MAX ((u16)(~0U)) -#define SHRT_MAX ((s16)(USHRT_MAX>>1)) -#define SHRT_MIN ((s16)(-SHRT_MAX - 1)) -#define INT_MAX ((int)(~0U>>1)) -#define INT_MIN (-INT_MAX - 1) -#define UINT_MAX (~0U) -#define LONG_MAX ((long)(~0UL>>1)) -#define LONG_MIN (-LONG_MAX - 1) -#define ULONG_MAX (~0UL) -#define LLONG_MAX ((long long)(~0ULL>>1)) -#define LLONG_MIN (-LLONG_MAX - 1) -#define ULLONG_MAX (~0ULL) -#define SIZE_MAX (~(size_t)0) - -#define U8_MAX ((u8)~0U) -#define S8_MAX ((s8)(U8_MAX>>1)) -#define S8_MIN ((s8)(-S8_MAX - 1)) -#define U16_MAX ((u16)~0U) -#define S16_MAX ((s16)(U16_MAX>>1)) -#define S16_MIN ((s16)(-S16_MAX - 1)) -#define U32_MAX ((u32)~0U) -#define S32_MAX ((s32)(U32_MAX>>1)) -#define S32_MIN ((s32)(-S32_MAX - 1)) -#define U64_MAX ((u64)~0ULL) -#define S64_MAX ((s64)(U64_MAX>>1)) -#define S64_MIN ((s64)(-S64_MAX - 1)) +#include <linux/limits.h> #define ALIGN(x, a) __ALIGN_MASK(x, (typeof(x))(a) - 1) #define ALIGN_DOWN(x, a) ALIGN((x) - ((a) - 1), (a)) diff --git a/include/linux/limits.h b/include/linux/limits.h new file mode 100644 index 0000000000..bda9c94bb5 --- /dev/null +++ b/include/linux/limits.h @@ -0,0 +1,35 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _LINUX_LIMITS_H +#define _LINUX_LIMITS_H + +#include <linux/types.h> + +#define USHRT_MAX ((unsigned short)~0U) +#define SHRT_MAX ((short)(USHRT_MAX >> 1)) +#define SHRT_MIN ((short)(-SHRT_MAX - 1)) +#define INT_MAX ((int)(~0U >> 1)) +#define INT_MIN (-INT_MAX - 1) +#define UINT_MAX (~0U) +#define LONG_MAX ((long)(~0UL >> 1)) +#define LONG_MIN (-LONG_MAX - 1) +#define ULONG_MAX (~0UL) +#define LLONG_MAX ((long long)(~0ULL >> 1)) +#define LLONG_MIN (-LLONG_MAX - 1) +#define ULLONG_MAX (~0ULL) +#define SIZE_MAX (~(size_t)0) +#define PHYS_ADDR_MAX (~(phys_addr_t)0) + +#define U8_MAX ((u8)~0U) +#define S8_MAX ((s8)(U8_MAX >> 1)) +#define S8_MIN ((s8)(-S8_MAX - 1)) +#define U16_MAX ((u16)~0U) +#define S16_MAX ((s16)(U16_MAX >> 1)) +#define S16_MIN ((s16)(-S16_MAX - 1)) +#define U32_MAX ((u32)~0U) +#define S32_MAX ((s32)(U32_MAX >> 1)) +#define S32_MIN ((s32)(-S32_MAX - 1)) +#define U64_MAX ((u64)~0ULL) +#define S64_MAX ((s64)(U64_MAX >> 1)) +#define S64_MIN ((s64)(-S64_MAX - 1)) + +#endif /* _LINUX_LIMITS_H */ diff --git a/include/linux/mfd/rave-sp.h b/include/linux/mfd/rave-sp.h index 37a37788d8..7b3187cb74 100644 --- a/include/linux/mfd/rave-sp.h +++ b/include/linux/mfd/rave-sp.h @@ -25,6 +25,7 @@ enum rave_sp_command { RAVE_SP_CMD_SET_BACKLIGHT = 0xA6, RAVE_SP_CMD_RESET = 0xA7, RAVE_SP_CMD_RESET_REASON = 0xA8, + RAVE_SP_CMD_RESET_ETH_SWITCH = 0xAF, RAVE_SP_CMD_JUMP_TO_BOOTLOADER = 0xB0, RAVE_SP_CMD_BOOTLOADER = 0xB1, diff --git a/include/linux/phy.h b/include/linux/phy.h index 82c8da03ce..a9fdf44f1a 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -267,6 +267,9 @@ struct phy_driver { /* Clears up any memory if needed */ void (*remove)(struct phy_device *phydev); + int (*read_page)(struct phy_device *phydev); + int (*write_page)(struct phy_device *phydev, int page); + struct driver_d drv; }; #define to_phy_driver(d) ((d) ? container_of(d, struct phy_driver, drv) : NULL) @@ -274,6 +277,10 @@ struct phy_driver { #define PHY_ANY_ID "MATCH ANY PHY" #define PHY_ANY_UID 0xffffffff +#define PHY_ID_MATCH_EXACT(id) .phy_id = (id), .phy_id_mask = GENMASK(31, 0) +#define PHY_ID_MATCH_MODEL(id) .phy_id = (id), .phy_id_mask = GENMASK(31, 4) +#define PHY_ID_MATCH_VENDOR(id) .phy_id = (id), .phy_id_mask = GENMASK(31, 10) + /* A Structure for boards to register fixups with the PHY Lib */ struct phy_fixup { struct list_head list; @@ -289,6 +296,14 @@ struct phy_device *get_phy_device(struct mii_bus *bus, int addr); int phy_init(void); int phy_init_hw(struct phy_device *phydev); +int phy_save_page(struct phy_device *phydev); +int phy_select_page(struct phy_device *phydev, int page); +int phy_restore_page(struct phy_device *phydev, int oldpage, int ret); +int phy_read_paged(struct phy_device *phydev, int page, u32 regnum); +int phy_write_paged(struct phy_device *phydev, int page, u32 regnum, u16 val); +int phy_modify_paged(struct phy_device *phydev, int page, u32 regnum, + u16 mask, u16 set); + struct phy_device *phy_device_create(struct mii_bus *bus, int addr, int phy_id); int phy_register_device(struct phy_device* dev); void phy_unregister_device(struct phy_device *phydev); @@ -314,6 +329,30 @@ static inline int phy_write(struct phy_device *phydev, u32 regnum, u16 val) return mdiobus_write(phydev->bus, phydev->addr, regnum, val); } +int phy_modify(struct phy_device *phydev, u32 regnum, u16 mask, u16 set); + +/** + * phy_set_bits - Convenience function for setting bits in a PHY register + * @phydev: the phy_device struct + * @regnum: register number to write + * @val: bits to set + */ +static inline int phy_set_bits(struct phy_device *phydev, u32 regnum, u16 val) +{ + return phy_modify(phydev, regnum, 0, val); +} + +/** + * phy_clear_bits - Convenience function for clearing bits in a PHY register + * @phydev: the phy_device struct + * @regnum: register number to write + * @val: bits to clear + */ +static inline int phy_clear_bits(struct phy_device *phydev, u32 regnum, u16 val) +{ + return phy_modify(phydev, regnum, val, 0); +} + int phy_device_connect(struct eth_device *dev, struct mii_bus *bus, int addr, void (*adjust_link) (struct eth_device *edev), u32 flags, phy_interface_t interface); diff --git a/include/linux/pstore.h b/include/linux/pstore.h index a925e14397..15e1e3d6fa 100644 --- a/include/linux/pstore.h +++ b/include/linux/pstore.h @@ -25,6 +25,8 @@ #include <linux/types.h> #include <asm-generic/errno.h> +struct module; + /* types */ enum pstore_type_id { PSTORE_TYPE_DMESG = 0, @@ -43,7 +45,21 @@ enum kmsg_dump_reason { KMSG_DUMP_UNDEF, }; -struct module; +struct pstore_info; + +struct pstore_record { + struct pstore_info *psi; + enum pstore_type_id type; + u64 id; + char *buf; + ssize_t size; + ssize_t ecc_notice_size; + + int count; + enum kmsg_dump_reason reason; + unsigned int part; + bool compressed; +}; struct pstore_info { struct module *owner; @@ -53,13 +69,8 @@ struct pstore_info { int flags; int (*open)(struct pstore_info *psi); int (*close)(struct pstore_info *psi); - ssize_t (*read)(u64 *id, enum pstore_type_id *type, - int *count, char **buf, bool *compressed, - struct pstore_info *psi); - int (*write)(enum pstore_type_id type, - enum kmsg_dump_reason reason, u64 *id, - unsigned int part, int count, bool compressed, - size_t size, struct pstore_info *psi); + ssize_t (*read)(struct pstore_record *record); + int (*write)(struct pstore_record *record); int (*write_buf)(enum pstore_type_id type, enum kmsg_dump_reason reason, u64 *id, unsigned int part, const char *buf, bool compressed, diff --git a/include/linux/pstore_ram.h b/include/linux/pstore_ram.h index 5ef823a57b..de6eaa93f9 100644 --- a/include/linux/pstore_ram.h +++ b/include/linux/pstore_ram.h @@ -29,11 +29,13 @@ struct persistent_ram_ecc_info { int ecc_size; int symsize; int poly; + uint16_t *par; }; struct persistent_ram_zone { phys_addr_t paddr; size_t size; + char *label; struct persistent_ram_buffer *buffer; size_t buffer_size; struct resource *res; @@ -52,7 +54,7 @@ struct persistent_ram_zone { struct persistent_ram_zone *persistent_ram_new(phys_addr_t start, size_t size, u32 sig, struct persistent_ram_ecc_info *ecc_info, - unsigned int memtype); + unsigned int memtype, char *label); void persistent_ram_free(struct persistent_ram_zone *prz); void persistent_ram_zap(struct persistent_ram_zone *prz); diff --git a/include/scsi.h b/include/scsi.h index 00750acac8..59d47393c8 100644 --- a/include/scsi.h +++ b/include/scsi.h @@ -20,26 +20,6 @@ #ifndef _SCSI_H #define _SCSI_H -typedef struct SCSI_cmd_block { - unsigned char cmd[16]; /* command */ - unsigned char sense_buf[64]; /* for request sense */ - unsigned char status; /* SCSI Status */ - unsigned char target; /* Target ID */ - unsigned char lun; /* Target LUN */ - unsigned char cmdlen; /* command len */ - unsigned long datalen; /* Total data length */ - unsigned char * pdata; /* pointer to data */ - unsigned char msgout[12]; /* Messge out buffer (NOT USED) */ - unsigned char msgin[12]; /* Message in buffer */ - unsigned char sensecmdlen; /* Sense command len */ - unsigned long sensedatalen; /* Sense data len */ - unsigned char sensecmd[6]; /* Sense command */ - unsigned long contr_stat; /* Controller Status */ - unsigned long trans_bytes; /* tranfered bytes */ - - unsigned int priv; -} ccb; - /*----------------------------------------------------------- ** ** SCSI constants. @@ -171,8 +151,6 @@ typedef struct SCSI_cmd_block { * decleration of functions which have to reside in the LowLevel Part Driver */ -void scsi_print_error(ccb *pccb); -int scsi_exec(ccb *pccb); void scsi_bus_reset(void); void scsi_low_level_init(int busdevfunc); diff --git a/include/soc/fsl/fsl_ddr_sdram.h b/include/soc/fsl/fsl_ddr_sdram.h new file mode 100644 index 0000000000..07d0af96fc --- /dev/null +++ b/include/soc/fsl/fsl_ddr_sdram.h @@ -0,0 +1,558 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright 2008-2016 Freescale Semiconductor, Inc. + * Copyright 2017-2018 NXP Semiconductor + */ + +#ifndef FSL_DDR_MEMCTL_H +#define FSL_DDR_MEMCTL_H + +#include <ddr_spd.h> +#include <soc/fsl/fsl_immap.h> + +struct common_timing_params { + /* parameters to constrict */ + + unsigned int tckmin_x_ps; + unsigned int tckmax_ps; + unsigned int trcd_ps; + unsigned int trp_ps; + unsigned int tras_ps; + unsigned int taamin_ps; /* ddr3, ddr4 */ + + unsigned int trfc1_ps; /* ddr4 */ + unsigned int trfc2_ps; /* ddr4 */ + unsigned int trfc4_ps; /* ddr4 */ + unsigned int trrds_ps; /* ddr4 */ + unsigned int trrdl_ps; /* ddr4 */ + unsigned int tccdl_ps; /* ddr4 */ + unsigned int trfc_slr_ps; /* ddr4 */ + unsigned int twtr_ps; /* !ddr4, maximum = 63750 ps */ + unsigned int trfc_ps; /* !ddr4, maximum = 255 ns + 256 ns + .75 ns + = 511750 ps */ + + unsigned int trrd_ps; /* !ddr4, maximum = 63750 ps */ + unsigned int trtp_ps; /* !ddr4, byte 38, spd->trtp */ + unsigned int twr_ps; /* maximum = 63750 ps */ + unsigned int trc_ps; /* maximum = 254 ns + .75 ns = 254750 ps */ + + unsigned int refresh_rate_ps; + unsigned int extended_op_srt; + + unsigned int tis_ps; /* ddr1, ddr2, byte 32, spd->ca_setup */ + unsigned int tih_ps; /* ddr1, ddr2, byte 33, spd->ca_hold */ + unsigned int tds_ps; /* ddr1, ddr2, byte 34, spd->data_setup */ + unsigned int tdh_ps; /* ddr1, ddr2, byte 35, spd->data_hold */ + unsigned int tdqsq_max_ps; /* ddr1, ddr2, byte 44, spd->tdqsq */ + unsigned int tqhs_ps; /* ddr1, ddr2, byte 45, spd->tqhs */ + + unsigned int ndimms_present; + unsigned int lowest_common_spd_caslat; + unsigned int highest_common_derated_caslat; + unsigned int additive_latency; + unsigned int all_dimms_burst_lengths_bitmask; + unsigned int all_dimms_registered; + unsigned int all_dimms_unbuffered; + unsigned int all_dimms_ecc_capable; + + unsigned long long total_mem; + unsigned long long base_address; + + /* DDR3 RDIMM */ + unsigned char rcw[16]; /* Register Control Word 0-15 */ +}; + +enum sdram_type { + SDRAM_TYPE_DDR1 = 2, + SDRAM_TYPE_DDR2 = 3, + SDRAM_TYPE_LPDDR1 = 6, + SDRAM_TYPE_DDR3 = 7, + SDRAM_TYPE_DDR4 = 5, +}; + +#define DDR_BL4 4 /* burst length 4 */ +#define DDR_BC4 DDR_BL4 /* burst chop for ddr3 */ +#define DDR_OTF 6 /* on-the-fly BC4 and BL8 */ +#define DDR_BL8 8 /* burst length 8 */ + +#define DDR3_RTT_OFF 0 +#define DDR3_RTT_60_OHM 1 /* RTT_Nom = RZQ/4 */ +#define DDR3_RTT_120_OHM 2 /* RTT_Nom = RZQ/2 */ +#define DDR3_RTT_40_OHM 3 /* RTT_Nom = RZQ/6 */ +#define DDR3_RTT_20_OHM 4 /* RTT_Nom = RZQ/12 */ +#define DDR3_RTT_30_OHM 5 /* RTT_Nom = RZQ/8 */ + +#define DDR4_RTT_OFF 0 +#define DDR4_RTT_60_OHM 1 /* RZQ/4 */ +#define DDR4_RTT_120_OHM 2 /* RZQ/2 */ +#define DDR4_RTT_40_OHM 3 /* RZQ/6 */ +#define DDR4_RTT_240_OHM 4 /* RZQ/1 */ +#define DDR4_RTT_48_OHM 5 /* RZQ/5 */ +#define DDR4_RTT_80_OHM 6 /* RZQ/3 */ +#define DDR4_RTT_34_OHM 7 /* RZQ/7 */ + +#define DDR2_RTT_OFF 0 +#define DDR2_RTT_75_OHM 1 +#define DDR2_RTT_150_OHM 2 +#define DDR2_RTT_50_OHM 3 + +#define FSL_DDR_MIN_TCKE_PULSE_WIDTH_DDR1 1 +#define FSL_DDR_MIN_TCKE_PULSE_WIDTH_DDR2 3 + +#define FSL_DDR_ODT_NEVER 0x0 +#define FSL_DDR_ODT_CS 0x1 +#define FSL_DDR_ODT_ALL_OTHER_CS 0x2 +#define FSL_DDR_ODT_OTHER_DIMM 0x3 +#define FSL_DDR_ODT_ALL 0x4 +#define FSL_DDR_ODT_SAME_DIMM 0x5 +#define FSL_DDR_ODT_CS_AND_OTHER_DIMM 0x6 +#define FSL_DDR_ODT_OTHER_CS_ONSAMEDIMM 0x7 + +/* define bank(chip select) interleaving mode */ +#define FSL_DDR_CS0_CS1 0x40 +#define FSL_DDR_CS2_CS3 0x20 +#define FSL_DDR_CS0_CS1_AND_CS2_CS3 (FSL_DDR_CS0_CS1 | FSL_DDR_CS2_CS3) +#define FSL_DDR_CS0_CS1_CS2_CS3 (FSL_DDR_CS0_CS1_AND_CS2_CS3 | 0x04) + +/* define memory controller interleaving mode */ +#define FSL_DDR_CACHE_LINE_INTERLEAVING 0x0 +#define FSL_DDR_PAGE_INTERLEAVING 0x1 +#define FSL_DDR_BANK_INTERLEAVING 0x2 +#define FSL_DDR_SUPERBANK_INTERLEAVING 0x3 +#define FSL_DDR_256B_INTERLEAVING 0x8 +#define FSL_DDR_3WAY_1KB_INTERLEAVING 0xA +#define FSL_DDR_3WAY_4KB_INTERLEAVING 0xC +#define FSL_DDR_3WAY_8KB_INTERLEAVING 0xD +/* placeholder for 4-way interleaving */ +#define FSL_DDR_4WAY_1KB_INTERLEAVING 0x1A +#define FSL_DDR_4WAY_4KB_INTERLEAVING 0x1C +#define FSL_DDR_4WAY_8KB_INTERLEAVING 0x1D + +#define SDRAM_CS_CONFIG_EN 0x80000000 + +/* DDR_SDRAM_CFG - DDR SDRAM Control Configuration + */ +#define SDRAM_CFG_MEM_EN 0x80000000 +#define SDRAM_CFG_SREN 0x40000000 +#define SDRAM_CFG_ECC_EN 0x20000000 +#define SDRAM_CFG_RD_EN 0x10000000 +#define SDRAM_CFG_SDRAM_TYPE_DDR1 0x02000000 +#define SDRAM_CFG_SDRAM_TYPE_DDR2 0x03000000 +#define SDRAM_CFG_SDRAM_TYPE_MASK 0x07000000 +#define SDRAM_CFG_SDRAM_TYPE_SHIFT 24 +#define SDRAM_CFG_DYN_PWR 0x00200000 +#define SDRAM_CFG_DBW_MASK 0x00180000 +#define SDRAM_CFG_DBW_SHIFT 19 +#define SDRAM_CFG_32_BE 0x00080000 +#define SDRAM_CFG_16_BE 0x00100000 +#define SDRAM_CFG_8_BE 0x00040000 +#define SDRAM_CFG_NCAP 0x00020000 +#define SDRAM_CFG_2T_EN 0x00008000 +#define SDRAM_CFG_BI 0x00000001 + +#define SDRAM_CFG2_FRC_SR 0x80000000 +#define SDRAM_CFG2_D_INIT 0x00000010 +#define SDRAM_CFG2_AP_EN 0x00000020 +#define SDRAM_CFG2_ODT_CFG_MASK 0x00600000 +#define SDRAM_CFG2_ODT_NEVER 0 +#define SDRAM_CFG2_ODT_ONLY_WRITE 1 +#define SDRAM_CFG2_ODT_ONLY_READ 2 +#define SDRAM_CFG2_ODT_ALWAYS 3 + +#define SDRAM_INTERVAL_BSTOPRE 0x3FFF +#define TIMING_CFG_2_CPO_MASK 0x0F800000 + +#define RD_TO_PRE_MASK 0xf +#define RD_TO_PRE_SHIFT 13 +#define WR_DATA_DELAY_MASK 0xf +#define WR_DATA_DELAY_SHIFT 9 + +/* DDR_EOR register */ +#define DDR_EOR_RD_REOD_DIS 0x07000000 +#define DDR_EOR_WD_REOD_DIS 0x00100000 + +/* DDR_MD_CNTL */ +#define MD_CNTL_MD_EN 0x80000000 +#define MD_CNTL_CS_SEL_CS0 0x00000000 +#define MD_CNTL_CS_SEL_CS1 0x10000000 +#define MD_CNTL_CS_SEL_CS2 0x20000000 +#define MD_CNTL_CS_SEL_CS3 0x30000000 +#define MD_CNTL_CS_SEL_CS0_CS1 0x40000000 +#define MD_CNTL_CS_SEL_CS2_CS3 0x50000000 +#define MD_CNTL_MD_SEL_MR 0x00000000 +#define MD_CNTL_MD_SEL_EMR 0x01000000 +#define MD_CNTL_MD_SEL_EMR2 0x02000000 +#define MD_CNTL_MD_SEL_EMR3 0x03000000 +#define MD_CNTL_SET_REF 0x00800000 +#define MD_CNTL_SET_PRE 0x00400000 +#define MD_CNTL_CKE_CNTL_LOW 0x00100000 +#define MD_CNTL_CKE_CNTL_HIGH 0x00200000 +#define MD_CNTL_WRCW 0x00080000 +#define MD_CNTL_MD_VALUE(x) (x & 0x0000FFFF) +#define MD_CNTL_CS_SEL(x) (((x) & 0x7) << 28) +#define MD_CNTL_MD_SEL(x) (((x) & 0xf) << 24) + +/* DDR_CDR1 */ +#define DDR_CDR1_DHC_EN 0x80000000 +#define DDR_CDR1_V0PT9_EN 0x40000000 +#define DDR_CDR1_ODT_SHIFT 17 +#define DDR_CDR1_ODT_MASK 0x6 +#define DDR_CDR2_ODT_MASK 0x1 +#define DDR_CDR1_ODT(x) ((x & DDR_CDR1_ODT_MASK) << DDR_CDR1_ODT_SHIFT) +#define DDR_CDR2_ODT(x) (x & DDR_CDR2_ODT_MASK) +#define DDR_CDR2_VREF_OVRD(x) (0x00008080 | ((((x) - 37) & 0x3F) << 8)) +#define DDR_CDR2_VREF_TRAIN_EN 0x00000080 +#define DDR_CDR2_VREF_RANGE_2 0x00000040 + +/* DDR ERR_DISABLE */ +#define DDR_ERR_DISABLE_APED (1 << 8) /* Address parity error disable */ + +/* Mode Registers */ +#define DDR_MR5_CA_PARITY_LAT_4_CLK 0x1 /* for DDR4-1600/1866/2133 */ +#define DDR_MR5_CA_PARITY_LAT_5_CLK 0x2 /* for DDR4-2400 */ + +/* DEBUG_26 register */ +#define DDR_CAS_TO_PRE_SUB_MASK 0x0000f000 /* CAS to preamble subtract value */ +#define DDR_CAS_TO_PRE_SUB_SHIFT 12 + +/* DEBUG_29 register */ +#define DDR_TX_BD_DIS (1 << 10) /* Transmit Bit Deskew Disable */ + + +#define DDR4_CDR_ODT_OFF 0x0 +#define DDR4_CDR_ODT_100ohm 0x1 +#define DDR4_CDR_ODT_120ohm 0x2 +#define DDR4_CDR_ODT_80ohm 0x3 +#define DDR4_CDR_ODT_60ohm 0x4 +#define DDR4_CDR_ODT_40ohm 0x5 +#define DDR4_CDR_ODT_50ohm 0x6 +#define DDR4_CDR_ODT_30ohm 0x7 + +#define DDR123_CDR_ODT_OFF 0x0 +#define DDR123_CDR_ODT_120ohm 0x1 +#define DDR123_CDR_ODT_180ohm 0x2 +#define DDR123_CDR_ODT_75ohm 0x3 +#define DDR123_CDR_ODT_110ohm 0x4 +#define DDR123_CDR_ODT_60hm 0x5 +#define DDR123_CDR_ODT_70ohm 0x6 +#define DDR123_CDR_ODT_47ohm 0x7 + +#define DDR_INIT_ADDR_EXT_UIA (1 << 31) + +#define MAX_CHIP_SELECTS_PER_CTRL 4 +#define MAX_DIMM_SLOTS_PER_CTRL 2 + +/* Record of register values computed */ +typedef struct fsl_ddr_cfg_regs_s { + struct { + unsigned int bnds; + unsigned int config; + unsigned int config_2; + } cs[MAX_CHIP_SELECTS_PER_CTRL]; + unsigned int timing_cfg_3; + unsigned int timing_cfg_0; + unsigned int timing_cfg_1; + unsigned int timing_cfg_2; + unsigned int ddr_sdram_cfg; + unsigned int ddr_sdram_cfg_2; + unsigned int ddr_sdram_cfg_3; + unsigned int ddr_sdram_mode; + unsigned int ddr_sdram_mode_2; + unsigned int ddr_sdram_mode_3; + unsigned int ddr_sdram_mode_4; + unsigned int ddr_sdram_mode_5; + unsigned int ddr_sdram_mode_6; + unsigned int ddr_sdram_mode_7; + unsigned int ddr_sdram_mode_8; + unsigned int ddr_sdram_mode_9; + unsigned int ddr_sdram_mode_10; + unsigned int ddr_sdram_mode_11; + unsigned int ddr_sdram_mode_12; + unsigned int ddr_sdram_mode_13; + unsigned int ddr_sdram_mode_14; + unsigned int ddr_sdram_mode_15; + unsigned int ddr_sdram_mode_16; + unsigned int ddr_sdram_md_cntl; + unsigned int ddr_sdram_interval; + unsigned int ddr_data_init; + unsigned int ddr_sdram_clk_cntl; + unsigned int ddr_init_addr; + unsigned int ddr_init_ext_addr; + unsigned int timing_cfg_4; + unsigned int timing_cfg_5; + unsigned int timing_cfg_6; + unsigned int timing_cfg_7; + unsigned int timing_cfg_8; + unsigned int timing_cfg_9; + unsigned int ddr_zq_cntl; + unsigned int ddr_wrlvl_cntl; + unsigned int ddr_wrlvl_cntl_2; + unsigned int ddr_wrlvl_cntl_3; + unsigned int ddr_sr_cntr; + unsigned int ddr_sdram_rcw_1; + unsigned int ddr_sdram_rcw_2; + unsigned int ddr_sdram_rcw_3; + unsigned int ddr_sdram_rcw_4; + unsigned int ddr_sdram_rcw_5; + unsigned int ddr_sdram_rcw_6; + unsigned int dq_map_0; + unsigned int dq_map_1; + unsigned int dq_map_2; + unsigned int dq_map_3; + unsigned int ddr_eor; + unsigned int ddr_cdr1; + unsigned int ddr_cdr2; + unsigned int err_disable; + unsigned int err_int_en; + unsigned int debug[64]; +} fsl_ddr_cfg_regs_t; + +#define DDR_DATA_BUS_WIDTH_64 0 +#define DDR_DATA_BUS_WIDTH_32 1 +#define DDR_DATA_BUS_WIDTH_16 2 +#define DDR_CSWL_CS0 0x04000001 +/* + * Generalized parameters for memory controller configuration, + * might be a little specific to the FSL memory controller + */ +typedef struct memctl_options_s { + enum sdram_type ddrtype; + + /* + * Memory organization parameters + * + * if DIMM is present in the system + * where DIMMs are with respect to chip select + * where chip selects are with respect to memory boundaries + */ + unsigned int registered_dimm_en; /* use registered DIMM support */ + + /* Options local to a Chip Select */ + struct cs_local_opts_s { + unsigned int auto_precharge; + unsigned int odt_rd_cfg; + unsigned int odt_wr_cfg; + unsigned int odt_rtt_norm; + unsigned int odt_rtt_wr; + } cs_local_opts[MAX_CHIP_SELECTS_PER_CTRL]; + + /* Special configurations for chip select */ + unsigned int memctl_interleaving; + unsigned int memctl_interleaving_mode; + unsigned int ba_intlv_ctl; + unsigned int addr_hash; + + /* Operational mode parameters */ + unsigned int ecc_mode; /* Use ECC? */ + /* Initialize ECC using memory controller? */ + unsigned int ecc_init_using_memctl; + unsigned int dqs_config; /* Use DQS? maybe only with DDR2? */ + /* SREN - self-refresh during sleep */ + unsigned int self_refresh_in_sleep; + /* SR_IE - Self-refresh interrupt enable */ + unsigned int self_refresh_interrupt_en; + unsigned int dynamic_power; /* DYN_PWR */ + /* memory data width to use (16-bit, 32-bit, 64-bit) */ + unsigned int data_bus_width; + unsigned int burst_length; /* BL4, OTF and BL8 */ + /* On-The-Fly Burst Chop enable */ + unsigned int otf_burst_chop_en; + /* mirrior DIMMs for DDR3 */ + unsigned int mirrored_dimm; + unsigned int quad_rank_present; + unsigned int ap_en; /* address parity enable for RDIMM/DDR4-UDIMM */ + unsigned int x4_en; /* enable x4 devices */ + unsigned int package_3ds; + + /* Global Timing Parameters */ + unsigned int cas_latency_override; + unsigned int cas_latency_override_value; + unsigned int use_derated_caslat; + unsigned int additive_latency_override; + unsigned int additive_latency_override_value; + + unsigned int clk_adjust; /* */ + unsigned int cpo_override; /* override timing_cfg_2[CPO]*/ + unsigned int cpo_sample; /* optimize debug_29[24:31] */ + unsigned int write_data_delay; /* DQS adjust */ + + unsigned int cswl_override; + unsigned int wrlvl_override; + unsigned int wrlvl_sample; /* Write leveling */ + unsigned int wrlvl_start; + unsigned int wrlvl_ctl_2; + unsigned int wrlvl_ctl_3; + + unsigned int half_strength_driver_enable; + unsigned int twot_en; + unsigned int threet_en; + unsigned int bstopre; + unsigned int tfaw_window_four_activates_ps; /* tFAW -- FOUR_ACT */ + + /* Rtt impedance */ + unsigned int rtt_override; /* rtt_override enable */ + unsigned int rtt_override_value; /* that is Rtt_Nom for DDR3 */ + unsigned int rtt_wr_override_value; /* this is Rtt_WR for DDR3 */ + + /* Automatic self refresh */ + unsigned int auto_self_refresh_en; + unsigned int sr_it; + /* ZQ calibration */ + unsigned int zq_en; + /* Write leveling */ + unsigned int wrlvl_en; + /* RCW override for RDIMM */ + unsigned int rcw_override; + unsigned int rcw_1; + unsigned int rcw_2; + unsigned int rcw_3; + /* control register 1 */ + unsigned int ddr_cdr1; + unsigned int ddr_cdr2; + + unsigned int trwt_override; + unsigned int trwt; /* read-to-write turnaround */ +} memctl_options_t; + +#define EDC_DATA_PARITY 1 +#define EDC_ECC 2 +#define EDC_AC_PARITY 4 + +/* Parameters for a DDR dimm computed from the SPD */ +struct dimm_params { + + /* DIMM organization parameters */ + char mpart[19]; /* guaranteed null terminated */ + + unsigned int n_ranks; + unsigned int die_density; + unsigned long long rank_density; + unsigned long long capacity; + unsigned int data_width; + unsigned int primary_sdram_width; + unsigned int ec_sdram_width; + unsigned int registered_dimm; + unsigned int package_3ds; /* number of dies in 3DS DIMM */ + unsigned int device_width; /* x4, x8, x16 components */ + + /* SDRAM device parameters */ + unsigned int n_row_addr; + unsigned int n_col_addr; + unsigned int edc_config; /* 0 = none, 1 = parity, 2 = ECC */ + unsigned int bank_addr_bits; /* DDR4 */ + unsigned int bank_group_bits; /* DDR4 */ + unsigned int n_banks_per_sdram_device; /* !DDR4 */ + unsigned int burst_lengths_bitmask; /* BL=4 bit 2, BL=8 = bit 3 */ + + /* used in computing base address of DIMMs */ + unsigned long long base_address; + /* mirrored DIMMs */ + unsigned int mirrored_dimm; /* only for ddr3 */ + + /* DIMM timing parameters */ + + int mtb_ps; /* medium timebase ps */ + int ftb_10th_ps; /* fine timebase, in 1/10 ps */ + int taa_ps; /* minimum CAS latency time */ + int tfaw_ps; /* four active window delay */ + + /* + * SDRAM clock periods + * The range for these are 1000-10000 so a short should be sufficient + */ + int tckmin_x_ps; + int tckmin_x_minus_1_ps; + int tckmin_x_minus_2_ps; + int tckmax_ps; + + /* SPD-defined CAS latencies */ + unsigned int caslat_x; + unsigned int caslat_x_minus_1; + unsigned int caslat_x_minus_2; + + unsigned int caslat_lowest_derated; /* Derated CAS latency */ + + /* basic timing parameters */ + int trcd_ps; + int trp_ps; + int tras_ps; + + int trfc1_ps; /* DDR4 */ + int trfc2_ps; /* DDR4 */ + int trfc4_ps; /* DDR4 */ + int trrds_ps; /* DDR4 */ + int trrdl_ps; /* DDR4 */ + int tccdl_ps; /* DDR4 */ + int trfc_slr_ps; /* DDR4 */ + int twr_ps; /* !DDR4, maximum = 63750 ps */ + int trfc_ps; /* max = 255 ns + 256 ns + .75 ns + = 511750 ps */ + int trrd_ps; /* !DDR4, maximum = 63750 ps */ + int twtr_ps; /* !DDR4, maximum = 63750 ps */ + int trtp_ps; /* !DDR4, byte 38, spd->trtp */ + + int trc_ps; /* maximum = 254 ns + .75 ns = 254750 ps */ + + int refresh_rate_ps; + int extended_op_srt; + + int tis_ps; /* DDR1, DDR2, byte 32, spd->ca_setup */ + int tih_ps; /* DDR1, DDR2, byte 33, spd->ca_hold */ + int tds_ps; /* DDR1, DDR2, byte 34, spd->data_setup */ + int tdh_ps; /* DDR1, DDR2, byte 35, spd->data_hold */ + int tdqsq_max_ps; /* DDR1, DDR2, byte 44, spd->tdqsq */ + int tqhs_ps; /* DDR1, DDR2, byte 45, spd->tqhs */ + + /* DDR3 & DDR4 RDIMM */ + unsigned char rcw[16]; /* Register Control Word 0-15 */ + unsigned int dq_mapping[18]; /* DDR4 */ + unsigned int dq_mapping_ors; /* DDR4 */ +}; + +struct fsl_ddr_controller { + int num; + unsigned long ddr_freq; + struct ccsr_ddr __iomem *base; + struct spd_eeprom *spd_installed_dimms; + struct dimm_params *dimm_params; + memctl_options_t memctl_opts; + struct common_timing_params common_timing_params; + fsl_ddr_cfg_regs_t fsl_ddr_config_reg; + unsigned int dbw_capacity_adjust; + int chip_selects_per_ctrl; + int dimm_slots_per_ctrl; + bool erratum_A009663; + bool erratum_A008511; + bool erratum_A009803; + bool erratum_A010165; + bool erratum_A009801; + bool erratum_A004508; + bool erratum_A008378; + bool erratum_A009942; + void (*board_options)(memctl_options_t *popts, struct dimm_params *pdimm, + struct fsl_ddr_controller *c); +}; + +struct fsl_ddr_info { + struct fsl_ddr_controller *c; + unsigned int num_ctrls; + unsigned long long mem_base; +}; + +phys_size_t fsl_ddr_sdram(struct fsl_ddr_info *pinfo); + +#ifdef CONFIG_SYS_FSL_DDR_LE +#define ddr_in32(a) in_le32(a) +#define ddr_out32(a, v) out_le32(a, v) +#define ddr_setbits32(a, v) setbits_le32(a, v) +#define ddr_clrbits32(a, v) clrbits_le32(a, v) +#define ddr_clrsetbits32(a, clear, set) clrsetbits_le32(a, clear, set) +#else +#define ddr_in32(a) in_be32(a) +#define ddr_out32(a, v) out_be32(a, v) +#define ddr_setbits32(a, v) setbits_be32(a, v) +#define ddr_clrbits32(a, v) clrbits_be32(a, v) +#define ddr_clrsetbits32(a, clear, set) clrsetbits_be32(a, clear, set) +#endif + +#endif diff --git a/include/soc/fsl/fsl_fman.h b/include/soc/fsl/fsl_fman.h new file mode 100644 index 0000000000..96d61298ef --- /dev/null +++ b/include/soc/fsl/fsl_fman.h @@ -0,0 +1,439 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * MPC85xx Internal Memory Map + * + * Copyright 2010-2011 Freescale Semiconductor, Inc. + */ + +#ifndef __FSL_FMAN_H__ +#define __FSL_FMAN_H__ + +#include <linux/types.h> + +struct fm_bmi_common { + u32 fmbm_init; /* BMI initialization */ + u32 fmbm_cfg1; /* BMI configuration1 */ + u32 fmbm_cfg2; /* BMI configuration2 */ + u32 res0[0x5]; + u32 fmbm_ievr; /* interrupt event register */ + u32 fmbm_ier; /* interrupt enable register */ + u32 fmbm_ifr; /* interrupt force register */ + u32 res1[0x5]; + u32 fmbm_arb[0x8]; /* BMI arbitration */ + u32 res2[0x28]; + u32 fmbm_gde; /* global debug enable */ + u32 fmbm_pp[0x3f]; /* BMI port parameters */ + u32 res3; + u32 fmbm_pfs[0x3f]; /* BMI port FIFO size */ + u32 res4; + u32 fmbm_ppid[0x3f];/* port partition ID */ +}; + +struct fm_qmi_common { + u32 fmqm_gc; /* general configuration register */ + u32 res0; + u32 fmqm_eie; /* error interrupt event register */ + u32 fmqm_eien; /* error interrupt enable register */ + u32 fmqm_eif; /* error interrupt force register */ + u32 fmqm_ie; /* interrupt event register */ + u32 fmqm_ien; /* interrupt enable register */ + u32 fmqm_if; /* interrupt force register */ + u32 fmqm_gs; /* global status register */ + u32 fmqm_ts; /* task status register */ + u32 fmqm_etfc; /* enqueue total frame counter */ + u32 fmqm_dtfc; /* dequeue total frame counter */ + u32 fmqm_dc0; /* dequeue counter 0 */ + u32 fmqm_dc1; /* dequeue counter 1 */ + u32 fmqm_dc2; /* dequeue counter 2 */ + u32 fmqm_dc3; /* dequeue counter 3 */ + u32 fmqm_dfnoc; /* dequeue FQID not override counter */ + u32 fmqm_dfcc; /* dequeue FQID from context counter */ + u32 fmqm_dffc; /* dequeue FQID from FD counter */ + u32 fmqm_dcc; /* dequeue confirm counter */ + u32 res1[0xc]; + u32 fmqm_dtrc; /* debug trap configuration register */ + u32 fmqm_efddd; /* enqueue frame descriptor dynamic debug */ + u32 res3[0x2]; + u32 res4[0xdc]; /* missing debug regs */ +}; + +struct fm_bmi { + u8 res[1024]; +}; + +struct fm_qmi { + u8 res[1024]; +}; + +struct fm_bmi_rx_port { + u32 fmbm_rcfg; /* Rx configuration */ + u32 fmbm_rst; /* Rx status */ + u32 fmbm_rda; /* Rx DMA attributes */ + u32 fmbm_rfp; /* Rx FIFO parameters */ + u32 fmbm_rfed; /* Rx frame end data */ + u32 fmbm_ricp; /* Rx internal context parameters */ + u32 fmbm_rim; /* Rx internal margins */ + u32 fmbm_rebm; /* Rx external buffer margins */ + u32 fmbm_rfne; /* Rx frame next engine */ + u32 fmbm_rfca; /* Rx frame command attributes */ + u32 fmbm_rfpne; /* Rx frame parser next engine */ + u32 fmbm_rpso; /* Rx parse start offset */ + u32 fmbm_rpp; /* Rx policer profile */ + u32 fmbm_rccb; /* Rx coarse classification base */ + u32 res1[0x2]; + u32 fmbm_rprai[0x8]; /* Rx parse results array Initialization */ + u32 fmbm_rfqid; /* Rx frame queue ID */ + u32 fmbm_refqid; /* Rx error frame queue ID */ + u32 fmbm_rfsdm; /* Rx frame status discard mask */ + u32 fmbm_rfsem; /* Rx frame status error mask */ + u32 fmbm_rfene; /* Rx frame enqueue next engine */ + u32 res2[0x23]; + u32 fmbm_ebmpi[0x8]; /* buffer manager pool information */ + u32 fmbm_acnt[0x8]; /* allocate counter */ + u32 res3[0x8]; + u32 fmbm_cgm[0x8]; /* congestion group map */ + u32 fmbm_mpd; /* BMan pool depletion */ + u32 res4[0x1F]; + u32 fmbm_rstc; /* Rx statistics counters */ + u32 fmbm_rfrc; /* Rx frame counters */ + u32 fmbm_rfbc; /* Rx bad frames counter */ + u32 fmbm_rlfc; /* Rx large frames counter */ + u32 fmbm_rffc; /* Rx filter frames counter */ + u32 fmbm_rfdc; /* Rx frame discard counter */ + u32 fmbm_rfldec; /* Rx frames list DMA error counter */ + u32 fmbm_rodc; /* Rx out of buffers discard counter */ + u32 fmbm_rbdc; /* Rx buffers deallocate counter */ + u32 res5[0x17]; + u32 fmbm_rpc; /* Rx performance counters */ + u32 fmbm_rpcp; /* Rx performance count parameters */ + u32 fmbm_rccn; /* Rx cycle counter */ + u32 fmbm_rtuc; /* Rx tasks utilization counter */ + u32 fmbm_rrquc; /* Rx receive queue utilization counter */ + u32 fmbm_rduc; /* Rx DMA utilization counter */ + u32 fmbm_rfuc; /* Rx FIFO utilization counter */ + u32 fmbm_rpac; /* Rx pause activation counter */ + u32 res6[0x18]; + u32 fmbm_rdbg; /* Rx debug configuration */ +}; + +/* FMBM_RCFG - Rx configuration */ +#define FMBM_RCFG_EN 0x80000000 /* port is enabled to receive data */ +#define FMBM_RCFG_FDOVR 0x02000000 /* frame discard override */ +#define FMBM_RCFG_IM 0x01000000 /* independent mode */ + +/* FMBM_RST - Rx status */ +#define FMBM_RST_BSY 0x80000000 /* Rx port is busy */ + +/* FMBM_RFCA - Rx frame command attributes */ +#define FMBM_RFCA_ORDER 0x80000000 +#define FMBM_RFCA_MR_MASK 0x003f0000 +#define FMBM_RFCA_MR(x) ((x << 16) & FMBM_RFCA_MR_MASK) + +/* FMBM_RSTC - Rx statistics */ +#define FMBM_RSTC_EN 0x80000000 /* statistics counters enable */ + +struct fm_bmi_tx_port { + u32 fmbm_tcfg; /* Tx configuration */ + u32 fmbm_tst; /* Tx status */ + u32 fmbm_tda; /* Tx DMA attributes */ + u32 fmbm_tfp; /* Tx FIFO parameters */ + u32 fmbm_tfed; /* Tx frame end data */ + u32 fmbm_ticp; /* Tx internal context parameters */ + u32 fmbm_tfne; /* Tx frame next engine */ + u32 fmbm_tfca; /* Tx frame command attributes */ + u32 fmbm_tcfqid;/* Tx confirmation frame queue ID */ + u32 fmbm_tfeqid;/* Tx error frame queue ID */ + u32 fmbm_tfene; /* Tx frame enqueue next engine */ + u32 fmbm_trlmts;/* Tx rate limiter scale */ + u32 fmbm_trlmt; /* Tx rate limiter */ + u32 res0[0x73]; + u32 fmbm_tstc; /* Tx statistics counters */ + u32 fmbm_tfrc; /* Tx frame counter */ + u32 fmbm_tfdc; /* Tx frames discard counter */ + u32 fmbm_tfledc;/* Tx frame length error discard counter */ + u32 fmbm_tfufdc;/* Tx frame unsupported format discard counter */ + u32 fmbm_tbdc; /* Tx buffers deallocate counter */ + u32 res1[0x1a]; + u32 fmbm_tpc; /* Tx performance counters */ + u32 fmbm_tpcp; /* Tx performance count parameters */ + u32 fmbm_tccn; /* Tx cycle counter */ + u32 fmbm_ttuc; /* Tx tasks utilization counter */ + u32 fmbm_ttcquc;/* Tx transmit confirm queue utilization counter */ + u32 fmbm_tduc; /* Tx DMA utilization counter */ + u32 fmbm_tfuc; /* Tx FIFO utilization counter */ + u32 res2[0x19]; + u32 fmbm_tdcfg; /* Tx debug configuration */ +}; + +/* FMBM_TCFG - Tx configuration */ +#define FMBM_TCFG_EN 0x80000000 /* port is enabled to transmit data */ +#define FMBM_TCFG_IM 0x01000000 /* independent mode enable */ + +/* FMBM_TST - Tx status */ +#define FMBM_TST_BSY 0x80000000 /* Tx port is busy */ + +/* FMBM_TFCA - Tx frame command attributes */ +#define FMBM_TFCA_ORDER 0x80000000 +#define FMBM_TFCA_MR_MASK 0x003f0000 +#define FMBM_TFCA_MR(x) ((x << 16) & FMBM_TFCA_MR_MASK) + +/* FMBM_TSTC - Tx statistics counters */ +#define FMBM_TSTC_EN 0x80000000 + +/* FMBM_INIT - BMI initialization register */ +#define FMBM_INIT_START 0x80000000 /* init internal buffers */ + +/* FMBM_CFG1 - BMI configuration 1 */ +#define FMBM_CFG1_FBPS_MASK 0x03ff0000 /* Free buffer pool size */ +#define FMBM_CFG1_FBPS_SHIFT 16 +#define FMBM_CFG1_FBPO_MASK 0x000003ff /* Free buffer pool offset */ + +/* FMBM_IEVR - interrupt event */ +#define FMBM_IEVR_PEC 0x80000000 /* pipeline table ECC err detected */ +#define FMBM_IEVR_LEC 0x40000000 /* linked list RAM ECC error */ +#define FMBM_IEVR_SEC 0x20000000 /* statistics count RAM ECC error */ +#define FMBM_IEVR_CLEAR_ALL (FMBM_IEVR_PEC | FMBM_IEVR_LEC | FMBM_IEVR_SEC) + +/* FMBM_IER - interrupt enable */ +#define FMBM_IER_PECE 0x80000000 /* PEC interrupt enable */ +#define FMBM_IER_LECE 0x40000000 /* LEC interrupt enable */ +#define FMBM_IER_SECE 0x20000000 /* SEC interrupt enable */ + +#define FMBM_IER_DISABLE_ALL 0x00000000 + +/* FMBM_PP - BMI Port Parameters */ +#define FMBM_PP_MXT_MASK 0x3f000000 /* Max # tasks */ +#define FMBM_PP_MXT(x) (((x-1) << 24) & FMBM_PP_MXT_MASK) +#define FMBM_PP_MXD_MASK 0x00000f00 /* Max DMA */ +#define FMBM_PP_MXD(x) (((x-1) << 8) & FMBM_PP_MXD_MASK) + +/* FMBM_PFS - BMI Port FIFO Size */ +#define FMBM_PFS_IFSZ_MASK 0x000003ff /* Internal Fifo Size */ +#define FMBM_PFS_IFSZ(x) (x & FMBM_PFS_IFSZ_MASK) + +/* FMQM_GC - global configuration */ +#define FMQM_GC_ENQ_EN 0x80000000 /* enqueue enable */ +#define FMQM_GC_DEQ_EN 0x40000000 /* dequeue enable */ +#define FMQM_GC_STEN 0x10000000 /* enable global stat counters */ +#define FMQM_GC_ENQ_THR_MASK 0x00003f00 /* max number of enqueue Tnum */ +#define FMQM_GC_ENQ(x) ((x << 8) & FMQM_GC_ENQ_THR_MAS) +#define FMQM_GC_DEQ_THR_MASK 0x0000003f /* max number of dequeue Tnum */ +#define FMQM_GC_DEQ(x) (x & FMQM_GC_DEQ_THR_MASK) + +/* FMQM_EIE - error interrupt event register */ +#define FMQM_EIE_DEE 0x80000000 /* double-bit ECC error */ +#define FMQM_EIE_DFUPE 0x40000000 /* dequeue from unknown PortID */ +#define FMQM_EIE_CLEAR_ALL (FMQM_EIE_DEE | FMQM_EIE_DFUPE) + +/* FMQM_EIEN - error interrupt enable register */ +#define FMQM_EIEN_DEEN 0x80000000 /* double-bit ECC error */ +#define FMQM_EIEN_DFUPEN 0x40000000 /* dequeue from unknown PortID */ +#define FMQM_EIEN_DISABLE_ALL 0x00000000 + +/* FMQM_IE - interrupt event register */ +#define FMQM_IE_SEE 0x80000000 /* single-bit ECC error detected */ +#define FMQM_IE_CLEAR_ALL FMQM_IE_SEE + +/* FMQM_IEN - interrupt enable register */ +#define FMQM_IEN_SEE 0x80000000 /* single-bit ECC err IRQ enable */ +#define FMQM_IEN_DISABLE_ALL 0x00000000 + +/* NIA - next invoked action */ +#define NIA_ENG_RISC 0x00000000 +#define NIA_ENG_MASK 0x007c0000 + +/* action code */ +#define NIA_RISC_AC_CC 0x00000006 +#define NIA_RISC_AC_IM_TX 0x00000008 /* independent mode Tx */ +#define NIA_RISC_AC_IM_RX 0x0000000a /* independent mode Rx */ +#define NIA_RISC_AC_HC 0x0000000c + +struct fm_parser { + u8 res[1024]; +}; + +struct fm_policer { + u8 res[4*1024]; +}; + +struct fm_keygen { + u8 res[4*1024]; +}; + +struct fm_dma { + u32 fmdmsr; /* status register */ + u32 fmdmmr; /* mode register */ + u32 fmdmtr; /* bus threshold register */ + u32 fmdmhy; /* bus hysteresis register */ + u32 fmdmsetr; /* SOS emergency threshold register */ + u32 fmdmtah; /* transfer bus address high register */ + u32 fmdmtal; /* transfer bus address low register */ + u32 fmdmtcid; /* transfer bus communication ID register */ + u32 fmdmra; /* DMA bus internal ram address register */ + u32 fmdmrd; /* DMA bus internal ram data register */ + u32 res0[0xb]; + u32 fmdmdcr; /* debug counter */ + u32 fmdmemsr; /* emrgency smoother register */ + u32 res1; + u32 fmdmplr[32]; /* FM DMA PID-LIODN # register */ + u32 res[0x3c8]; +}; + +/* FMDMSR - Fman DMA status register */ +#define FMDMSR_CMDQNE 0x10000000 /* command queue not empty */ +#define FMDMSR_BER 0x08000000 /* bus err event occurred on bus */ +#define FMDMSR_RDB_ECC 0x04000000 /* read buffer ECC error */ +#define FMDMSR_WRB_SECC 0x02000000 /* write buf ECC err sys side */ +#define FMDMSR_WRB_FECC 0x01000000 /* write buf ECC err Fman side */ +#define FMDMSR_DPEXT_SECC 0x00800000 /* DP external ECC err sys side */ +#define FMDMSR_DPEXT_FECC 0x00400000 /* DP external ECC err Fman side */ +#define FMDMSR_DPDAT_SECC 0x00200000 /* DP data ECC err on sys side */ +#define FMDMSR_DPDAT_FECC 0x00100000 /* DP data ECC err on Fman side */ +#define FMDMSR_SPDAT_FECC 0x00080000 /* SP data ECC error Fman side */ + +#define FMDMSR_CLEAR_ALL (FMDMSR_BER | FMDMSR_RDB_ECC \ + | FMDMSR_WRB_SECC | FMDMSR_WRB_FECC \ + | FMDMSR_DPEXT_SECC | FMDMSR_DPEXT_FECC \ + | FMDMSR_DPDAT_SECC | FMDMSR_DPDAT_FECC \ + | FMDMSR_SPDAT_FECC) + +/* FMDMMR - FMan DMA mode register */ +#define FMDMMR_SBER 0x10000000 /* stop the DMA if a bus error */ + +struct fm_fpm { + u32 fpmtnc; /* TNUM control */ + u32 fpmprc; /* Port_ID control */ + u32 res0; + u32 fpmflc; /* flush control */ + u32 fpmdis1; /* dispatch thresholds1 */ + u32 fpmdis2; /* dispatch thresholds2 */ + u32 fmepi; /* error pending interrupts */ + u32 fmrie; /* rams interrupt enable */ + u32 fpmfcevent[0x4];/* FMan controller event 0-3 */ + u32 res1[0x4]; + u32 fpmfcmask[0x4]; /* FMan controller mask 0-3 */ + u32 res2[0x4]; + u32 fpmtsc1; /* timestamp control1 */ + u32 fpmtsc2; /* timestamp control2 */ + u32 fpmtsp; /* time stamp */ + u32 fpmtsf; /* time stamp fraction */ + u32 fpmrcr; /* rams control and event */ + u32 res3[0x3]; + u32 fpmdrd[0x4]; /* data_ram data 0-3 */ + u32 res4[0xc]; + u32 fpmdra; /* data ram access */ + u32 fm_ip_rev_1; /* IP block revision 1 */ + u32 fm_ip_rev_2; /* IP block revision 2 */ + u32 fmrstc; /* reset command */ + u32 fmcld; /* classifier debug control */ + u32 fmnpi; /* normal pending interrupts */ + u32 res5; + u32 fmfpee; /* event and enable */ + u32 fpmcev[0x4]; /* CPU event 0-3 */ + u32 res6[0x4]; + u32 fmfp_ps[0x40]; /* port status */ + u32 res7[0x260]; + u32 fpmts[0x80]; /* task status */ + u32 res8[0xa0]; +}; + +/* FMFP_PRC - FPM Port_ID Control Register */ +#define FMFPPRC_PORTID_MASK 0x3f000000 +#define FMFPPRC_PORTID_SHIFT 24 +#define FMFPPRC_ORA_SHIFT 16 +#define FMFPPRC_RISC1 0x00000001 +#define FMFPPRC_RISC2 0x00000002 +#define FMFPPRC_RISC_ALL (FMFPPRC_RISC1 | FMFPPRC_RSIC2) + +/* FPM Flush Control Register */ +#define FMFP_FLC_DISP_LIM_NONE 0x00000000 /* no dispatch limitation */ + +/* FMFP_EE - FPM event and enable register */ +#define FMFPEE_DECC 0x80000000 /* double ECC err on FPM ram */ +#define FMFPEE_STL 0x40000000 /* stall of task ... */ +#define FMFPEE_SECC 0x20000000 /* single ECC error */ +#define FMFPEE_RFM 0x00010000 /* release FMan */ +#define FMFPEE_DECC_EN 0x00008000 /* double ECC interrupt enable */ +#define FMFPEE_STL_EN 0x00004000 /* stall of task interrupt enable */ +#define FMFPEE_SECC_EN 0x00002000 /* single ECC err interrupt enable */ +#define FMFPEE_EHM 0x00000008 /* external halt enable */ +#define FMFPEE_UEC 0x00000004 /* FMan is not halted */ +#define FMFPEE_CER 0x00000002 /* only errornous task stalled */ +#define FMFPEE_DER 0x00000001 /* DMA error is just reported */ + +#define FMFPEE_CLEAR_EVENT (FMFPEE_DECC | FMFPEE_STL | FMFPEE_SECC | \ + FMFPEE_EHM | FMFPEE_UEC | FMFPEE_CER | \ + FMFPEE_DER | FMFPEE_RFM) + +/* FMFP_RCR - FMan Rams Control and Event */ +#define FMFP_RCR_MDEC 0x00008000 /* double ECC error in muram */ +#define FMFP_RCR_IDEC 0x00004000 /* double ECC error in iram */ + +struct fm_imem { + u32 iadd; /* instruction address register */ + u32 idata; /* instruction data register */ + u32 itcfg; /* timing config register */ + u32 iready; /* ready register */ + u8 res[0xff0]; +}; +#define IRAM_IADD_AIE 0x80000000 /* address auto increase enable */ +#define IRAM_READY 0x80000000 /* ready to use */ + +struct fm_soft_parser { + u8 res[4*1024]; +}; + +struct fm_dtesc { + u8 res[4*1024]; +}; + +struct fm_mdio { + u8 res0[0x120]; + u32 miimcfg; /* MII management configuration reg */ + u32 miimcom; /* MII management command reg */ + u32 miimadd; /* MII management address reg */ + u32 miimcon; /* MII management control reg */ + u32 miimstat; /* MII management status reg */ + u32 miimind; /* MII management indication reg */ + u8 res1[0x1000 - 0x138]; +}; + +struct fm_10gec { + u8 res[4*1024]; +}; + +struct fm_10gec_mdio { + u8 res[4*1024]; +}; + +struct fm_memac { + u8 res[4*1024]; +}; + +struct fm_memac_mdio { + u8 res[4*1024]; +}; + +struct fm_1588 { + u8 res[4*1024]; +}; + +struct ccsr_fman { + u8 muram[0x80000]; + struct fm_bmi_common fm_bmi_common; + struct fm_qmi_common fm_qmi_common; + u8 res0[2048]; + struct { + struct fm_bmi fm_bmi; + struct fm_qmi fm_qmi; + struct fm_parser fm_parser; + u8 res[1024]; + } port[63]; + struct fm_policer fm_policer; + struct fm_keygen fm_keygen; + struct fm_dma fm_dma; + struct fm_fpm fm_fpm; + struct fm_imem fm_imem; +}; + +#endif /*__FSL_FMAN_H__*/ diff --git a/include/soc/fsl/fsl_immap.h b/include/soc/fsl/fsl_immap.h new file mode 100644 index 0000000000..93dd6f67bd --- /dev/null +++ b/include/soc/fsl/fsl_immap.h @@ -0,0 +1,184 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Common internal memory map for some Freescale SoCs + * + * Copyright 2013-2014 Freescale Semiconductor, Inc. + */ + +#ifndef __FSL_IMMAP_H +#define __FSL_IMMAP_H +/* + * DDR memory controller registers + * This structure works for mpc83xx (DDR2 and DDR3), mpc85xx, mpc86xx. + */ +struct ccsr_ddr { + u32 cs0_bnds; /* Chip Select 0 Memory Bounds */ + u8 res_04[4]; + u32 cs1_bnds; /* Chip Select 1 Memory Bounds */ + u8 res_0c[4]; + u32 cs2_bnds; /* Chip Select 2 Memory Bounds */ + u8 res_14[4]; + u32 cs3_bnds; /* Chip Select 3 Memory Bounds */ + u8 res_1c[100]; + u32 cs0_config; /* Chip Select Configuration */ + u32 cs1_config; /* Chip Select Configuration */ + u32 cs2_config; /* Chip Select Configuration */ + u32 cs3_config; /* Chip Select Configuration */ + u8 res_90[48]; + u32 cs0_config_2; /* Chip Select Configuration 2 */ + u32 cs1_config_2; /* Chip Select Configuration 2 */ + u32 cs2_config_2; /* Chip Select Configuration 2 */ + u32 cs3_config_2; /* Chip Select Configuration 2 */ + u8 res_d0[48]; + u32 timing_cfg_3; /* SDRAM Timing Configuration 3 */ + u32 timing_cfg_0; /* SDRAM Timing Configuration 0 */ + u32 timing_cfg_1; /* SDRAM Timing Configuration 1 */ + u32 timing_cfg_2; /* SDRAM Timing Configuration 2 */ + u32 sdram_cfg; /* SDRAM Control Configuration */ + u32 sdram_cfg_2; /* SDRAM Control Configuration 2 */ + u32 sdram_mode; /* SDRAM Mode Configuration */ + u32 sdram_mode_2; /* SDRAM Mode Configuration 2 */ + u32 sdram_md_cntl; /* SDRAM Mode Control */ + u32 sdram_interval; /* SDRAM Interval Configuration */ + u32 sdram_data_init; /* SDRAM Data initialization */ + u8 res_12c[4]; + u32 sdram_clk_cntl; /* SDRAM Clock Control */ + u8 res_134[20]; + u32 init_addr; /* training init addr */ + u32 init_ext_addr; /* training init extended addr */ + u8 res_150[16]; + u32 timing_cfg_4; /* SDRAM Timing Configuration 4 */ + u32 timing_cfg_5; /* SDRAM Timing Configuration 5 */ + u32 timing_cfg_6; /* SDRAM Timing Configuration 6 */ + u32 timing_cfg_7; /* SDRAM Timing Configuration 7 */ + u32 ddr_zq_cntl; /* ZQ calibration control*/ + u32 ddr_wrlvl_cntl; /* write leveling control*/ + u8 reg_178[4]; + u32 ddr_sr_cntr; /* self refresh counter */ + u32 ddr_sdram_rcw_1; /* Control Words 1 */ + u32 ddr_sdram_rcw_2; /* Control Words 2 */ + u8 reg_188[8]; + u32 ddr_wrlvl_cntl_2; /* write leveling control 2 */ + u32 ddr_wrlvl_cntl_3; /* write leveling control 3 */ + u8 res_198[0x1a0-0x198]; + u32 ddr_sdram_rcw_3; + u32 ddr_sdram_rcw_4; + u32 ddr_sdram_rcw_5; + u32 ddr_sdram_rcw_6; + u8 res_1b0[0x200-0x1b0]; + u32 sdram_mode_3; /* SDRAM Mode Configuration 3 */ + u32 sdram_mode_4; /* SDRAM Mode Configuration 4 */ + u32 sdram_mode_5; /* SDRAM Mode Configuration 5 */ + u32 sdram_mode_6; /* SDRAM Mode Configuration 6 */ + u32 sdram_mode_7; /* SDRAM Mode Configuration 7 */ + u32 sdram_mode_8; /* SDRAM Mode Configuration 8 */ + u8 res_218[0x220-0x218]; + u32 sdram_mode_9; /* SDRAM Mode Configuration 9 */ + u32 sdram_mode_10; /* SDRAM Mode Configuration 10 */ + u32 sdram_mode_11; /* SDRAM Mode Configuration 11 */ + u32 sdram_mode_12; /* SDRAM Mode Configuration 12 */ + u32 sdram_mode_13; /* SDRAM Mode Configuration 13 */ + u32 sdram_mode_14; /* SDRAM Mode Configuration 14 */ + u32 sdram_mode_15; /* SDRAM Mode Configuration 15 */ + u32 sdram_mode_16; /* SDRAM Mode Configuration 16 */ + u8 res_240[0x250-0x240]; + u32 timing_cfg_8; /* SDRAM Timing Configuration 8 */ + u32 timing_cfg_9; /* SDRAM Timing Configuration 9 */ + u8 res_258[0x260-0x258]; + u32 sdram_cfg_3; + u8 res_264[0x400-0x264]; + u32 dq_map_0; + u32 dq_map_1; + u32 dq_map_2; + u32 dq_map_3; + u8 res_410[0xb20-0x410]; + u32 ddr_dsr1; /* Debug Status 1 */ + u32 ddr_dsr2; /* Debug Status 2 */ + u32 ddr_cdr1; /* Control Driver 1 */ + u32 ddr_cdr2; /* Control Driver 2 */ + u8 res_b30[200]; + u32 ip_rev1; /* IP Block Revision 1 */ + u32 ip_rev2; /* IP Block Revision 2 */ + u32 eor; /* Enhanced Optimization Register */ + u8 res_c04[252]; + u32 mtcr; /* Memory Test Control Register */ + u8 res_d04[28]; + u32 mtp1; /* Memory Test Pattern 1 */ + u32 mtp2; /* Memory Test Pattern 2 */ + u32 mtp3; /* Memory Test Pattern 3 */ + u32 mtp4; /* Memory Test Pattern 4 */ + u32 mtp5; /* Memory Test Pattern 5 */ + u32 mtp6; /* Memory Test Pattern 6 */ + u32 mtp7; /* Memory Test Pattern 7 */ + u32 mtp8; /* Memory Test Pattern 8 */ + u32 mtp9; /* Memory Test Pattern 9 */ + u32 mtp10; /* Memory Test Pattern 10 */ + u8 res_d48[184]; + u32 data_err_inject_hi; /* Data Path Err Injection Mask High */ + u32 data_err_inject_lo; /* Data Path Err Injection Mask Low */ + u32 ecc_err_inject; /* Data Path Err Injection Mask ECC */ + u8 res_e0c[20]; + u32 capture_data_hi; /* Data Path Read Capture High */ + u32 capture_data_lo; /* Data Path Read Capture Low */ + u32 capture_ecc; /* Data Path Read Capture ECC */ + u8 res_e2c[20]; + u32 err_detect; /* Error Detect */ + u32 err_disable; /* Error Disable */ + u32 err_int_en; + u32 capture_attributes; /* Error Attrs Capture */ + u32 capture_address; /* Error Addr Capture */ + u32 capture_ext_address; /* Error Extended Addr Capture */ + u32 err_sbe; /* Single-Bit ECC Error Management */ + u8 res_e5c[164]; + u32 debug[64]; /* debug_1 to debug_64 */ +}; + +#define CCI400_CTRLORD_TERM_BARRIER 0x00000008 +#define CCI400_CTRLORD_EN_BARRIER 0 +#define CCI400_SHAORD_NON_SHAREABLE 0x00000002 +#define CCI400_DVM_MESSAGE_REQ_EN 0x00000002 +#define CCI400_SNOOP_REQ_EN 0x00000001 + +/* CCI-400 registers */ +struct ccsr_cci400 { + u32 ctrl_ord; /* Control Override */ + u32 spec_ctrl; /* Speculation Control */ + u32 secure_access; /* Secure Access */ + u32 status; /* Status */ + u32 impr_err; /* Imprecise Error */ + u8 res_14[0x100 - 0x14]; + u32 pmcr; /* Performance Monitor Control */ + u8 res_104[0xfd0 - 0x104]; + u32 pid[8]; /* Peripheral ID */ + u32 cid[4]; /* Component ID */ + struct { + u32 snoop_ctrl; /* Snoop Control */ + u32 sha_ord; /* Shareable Override */ + u8 res_1008[0x1100 - 0x1008]; + u32 rc_qos_ord; /* read channel QoS Value Override */ + u32 wc_qos_ord; /* read channel QoS Value Override */ + u8 res_1108[0x110c - 0x1108]; + u32 qos_ctrl; /* QoS Control */ + u32 max_ot; /* Max OT */ + u8 res_1114[0x1130 - 0x1114]; + u32 target_lat; /* Target Latency */ + u32 latency_regu; /* Latency Regulation */ + u32 qos_range; /* QoS Range */ + u8 res_113c[0x2000 - 0x113c]; + } slave[5]; /* Slave Interface */ + u8 res_6000[0x9004 - 0x6000]; + u32 cycle_counter; /* Cycle counter */ + u32 count_ctrl; /* Count Control */ + u32 overflow_status; /* Overflow Flag Status */ + u8 res_9010[0xa000 - 0x9010]; + struct { + u32 event_select; /* Event Select */ + u32 event_count; /* Event Count */ + u32 counter_ctrl; /* Counter Control */ + u32 overflow_status; /* Overflow Flag Status */ + u8 res_a010[0xb000 - 0xa010]; + } pcounter[4]; /* Performance Counter */ + u8 res_e004[0x10000 - 0xe004]; +}; + +#endif /* __FSL_IMMAP_H */ diff --git a/include/soc/fsl/fsl_memac.h b/include/soc/fsl/fsl_memac.h new file mode 100644 index 0000000000..a0b8314f92 --- /dev/null +++ b/include/soc/fsl/fsl_memac.h @@ -0,0 +1,256 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * Roy Zang <tie-fei.zang@freescale.com> + */ + +#ifndef __MEMAC_H__ +#define __MEMAC_H__ + +struct memac { + /* memac general control and status registers */ + u32 res_0[2]; + u32 command_config; /* Control and configuration register */ + u32 mac_addr_0; /* Lower 32 bits of 48-bit MAC address */ + u32 mac_addr_1; /* Upper 16 bits of 48-bit MAC address */ + u32 maxfrm; /* Maximum frame length register */ + u32 res_18[5]; + u32 hashtable_ctrl; /* Hash table control register */ + u32 res_30[4]; + u32 ievent; /* Interrupt event register */ + u32 tx_ipg_length; /* Transmitter inter-packet-gap register */ + u32 res_48; + u32 imask; /* interrupt mask register */ + u32 res_50; + u32 cl_pause_quanta[4]; /* CL01-CL67 pause quanta register */ + u32 cl_pause_thresh[4]; /* CL01-CL67 pause thresh register */ + u32 rx_pause_status; /* Receive pause status register */ + u32 res_78[2]; + u32 mac_addr[14]; /* MAC address */ + u32 lpwake_timer; /* EEE low power wakeup timer register */ + u32 sleep_timer; /* Transmit EEE Low Power Timer register */ + u32 res_c0[8]; + u32 statn_config; /* Statistics configuration register */ + u32 res_e4[7]; + + /* memac statistics counter registers */ + u32 rx_eoct_l; /* Rx ethernet octests lower */ + u32 rx_eoct_u; /* Rx ethernet octests upper */ + u32 rx_oct_l; /* Rx octests lower */ + u32 rx_oct_u; /* Rx octests upper */ + u32 rx_align_err_l; /* Rx alignment error lower */ + u32 rx_align_err_u; /* Rx alignment error upper */ + u32 rx_pause_frame_l; /* Rx valid pause frame upper */ + u32 rx_pause_frame_u; /* Rx valid pause frame upper */ + u32 rx_frame_l; /* Rx frame counter lower */ + u32 rx_frame_u; /* Rx frame counter upper */ + u32 rx_frame_crc_err_l; /* Rx frame check sequence error lower */ + u32 rx_frame_crc_err_u; /* Rx frame check sequence error upper */ + u32 rx_vlan_l; /* Rx VLAN frame lower */ + u32 rx_vlan_u; /* Rx VLAN frame upper */ + u32 rx_err_l; /* Rx frame error lower */ + u32 rx_err_u; /* Rx frame error upper */ + u32 rx_uni_l; /* Rx unicast frame lower */ + u32 rx_uni_u; /* Rx unicast frame upper */ + u32 rx_multi_l; /* Rx multicast frame lower */ + u32 rx_multi_u; /* Rx multicast frame upper */ + u32 rx_brd_l; /* Rx broadcast frame lower */ + u32 rx_brd_u; /* Rx broadcast frame upper */ + u32 rx_drop_l; /* Rx dropped packets lower */ + u32 rx_drop_u; /* Rx dropped packets upper */ + u32 rx_pkt_l; /* Rx packets lower */ + u32 rx_pkt_u; /* Rx packets upper */ + u32 rx_undsz_l; /* Rx undersized packet lower */ + u32 rx_undsz_u; /* Rx undersized packet upper */ + u32 rx_64_l; /* Rx 64 oct packet lower */ + u32 rx_64_u; /* Rx 64 oct packet upper */ + u32 rx_127_l; /* Rx 65 to 127 oct packet lower */ + u32 rx_127_u; /* Rx 65 to 127 oct packet upper */ + u32 rx_255_l; /* Rx 128 to 255 oct packet lower */ + u32 rx_255_u; /* Rx 128 to 255 oct packet upper */ + u32 rx_511_l; /* Rx 256 to 511 oct packet lower */ + u32 rx_511_u; /* Rx 256 to 511 oct packet upper */ + u32 rx_1023_l; /* Rx 512 to 1023 oct packet lower */ + u32 rx_1023_u; /* Rx 512 to 1023 oct packet upper */ + u32 rx_1518_l; /* Rx 1024 to 1518 oct packet lower */ + u32 rx_1518_u; /* Rx 1024 to 1518 oct packet upper */ + u32 rx_1519_l; /* Rx 1519 to max oct packet lower */ + u32 rx_1519_u; /* Rx 1519 to max oct packet upper */ + u32 rx_oversz_l; /* Rx oversized packet lower */ + u32 rx_oversz_u; /* Rx oversized packet upper */ + u32 rx_jabber_l; /* Rx Jabber packet lower */ + u32 rx_jabber_u; /* Rx Jabber packet upper */ + u32 rx_frag_l; /* Rx Fragment packet lower */ + u32 rx_frag_u; /* Rx Fragment packet upper */ + u32 rx_cnp_l; /* Rx control packet lower */ + u32 rx_cnp_u; /* Rx control packet upper */ + u32 rx_drntp_l; /* Rx dripped not truncated packet lower */ + u32 rx_drntp_u; /* Rx dripped not truncated packet upper */ + u32 res_1d0[0xc]; + + u32 tx_eoct_l; /* Tx ethernet octests lower */ + u32 tx_eoct_u; /* Tx ethernet octests upper */ + u32 tx_oct_l; /* Tx octests lower */ + u32 tx_oct_u; /* Tx octests upper */ + u32 res_210[0x2]; + u32 tx_pause_frame_l; /* Tx valid pause frame lower */ + u32 tx_pause_frame_u; /* Tx valid pause frame upper */ + u32 tx_frame_l; /* Tx frame counter lower */ + u32 tx_frame_u; /* Tx frame counter upper */ + u32 tx_frame_crc_err_l; /* Tx frame check sequence error lower */ + u32 tx_frame_crc_err_u; /* Tx frame check sequence error upper */ + u32 tx_vlan_l; /* Tx VLAN frame lower */ + u32 tx_vlan_u; /* Tx VLAN frame upper */ + u32 tx_frame_err_l; /* Tx frame error lower */ + u32 tx_frame_err_u; /* Tx frame error upper */ + u32 tx_uni_l; /* Tx unicast frame lower */ + u32 tx_uni_u; /* Tx unicast frame upper */ + u32 tx_multi_l; /* Tx multicast frame lower */ + u32 tx_multi_u; /* Tx multicast frame upper */ + u32 tx_brd_l; /* Tx broadcast frame lower */ + u32 tx_brd_u; /* Tx broadcast frame upper */ + u32 res_258[0x2]; + u32 tx_pkt_l; /* Tx packets lower */ + u32 tx_pkt_u; /* Tx packets upper */ + u32 tx_undsz_l; /* Tx undersized packet lower */ + u32 tx_undsz_u; /* Tx undersized packet upper */ + u32 tx_64_l; /* Tx 64 oct packet lower */ + u32 tx_64_u; /* Tx 64 oct packet upper */ + u32 tx_127_l; /* Tx 65 to 127 oct packet lower */ + u32 tx_127_u; /* Tx 65 to 127 oct packet upper */ + u32 tx_255_l; /* Tx 128 to 255 oct packet lower */ + u32 tx_255_u; /* Tx 128 to 255 oct packet upper */ + u32 tx_511_l; /* Tx 256 to 511 oct packet lower */ + u32 tx_511_u; /* Tx 256 to 511 oct packet upper */ + u32 tx_1023_l; /* Tx 512 to 1023 oct packet lower */ + u32 tx_1023_u; /* Tx 512 to 1023 oct packet upper */ + u32 tx_1518_l; /* Tx 1024 to 1518 oct packet lower */ + u32 tx_1518_u; /* Tx 1024 to 1518 oct packet upper */ + u32 tx_1519_l; /* Tx 1519 to max oct packet lower */ + u32 tx_1519_u; /* Tx 1519 to max oct packet upper */ + u32 res_2a8[0x6]; + u32 tx_cnp_l; /* Tx control packet lower */ + u32 tx_cnp_u; /* Tx control packet upper */ + u32 res_2c8[0xe]; + + /* Line interface control register */ + u32 if_mode; /* interface mode control */ + u32 if_status; /* interface status */ + u32 res_308[0xe]; + + /* HiGig/2 Register */ + u32 hg_config; /* HiGig2 control and configuration */ + u32 res_344[0x3]; + u32 hg_pause_quanta; /* HiGig2 pause quanta */ + u32 res_354[0x3]; + u32 hg_pause_thresh; /* HiGig2 pause quanta threshold */ + u32 res_364[0x3]; + u32 hgrx_pause_status; /* HiGig2 rx pause quanta status */ + u32 hg_fifos_status; /* HiGig2 fifos status */ + u32 rhm; /* Rx HiGig2 message counter register */ + u32 thm;/* Tx HiGig2 message counter register */ + u32 res_380[0x320]; +}; + +/* COMMAND_CONFIG - command and configuration register */ +#define MEMAC_CMD_CFG_RX_EN 0x00000002 /* MAC Rx path enable */ +#define MEMAC_CMD_CFG_TX_EN 0x00000001 /* MAC Tx path enable */ +#define MEMAC_CMD_CFG_RXTX_EN (MEMAC_CMD_CFG_RX_EN | MEMAC_CMD_CFG_TX_EN) +#define MEMAC_CMD_CFG_NO_LEN_CHK 0x20000 /* Payload length check disable */ + +/* HASHTABLE_CTRL - Hashtable control register */ +#define HASHTABLE_CTRL_MCAST_EN 0x00000200 /* enable mulitcast Rx hash */ +#define HASHTABLE_CTRL_ADDR_MASK 0x000001ff + +/* TX_IPG_LENGTH - Transmit inter-packet gap length register */ +#define TX_IPG_LENGTH_IPG_LEN_MASK 0x000003ff + +/* IMASK - interrupt mask register */ +#define IMASK_MDIO_SCAN_EVENT 0x00010000 /* MDIO scan event mask */ +#define IMASK_MDIO_CMD_CMPL 0x00008000 /* MDIO cmd completion mask */ +#define IMASK_REM_FAULT 0x00004000 /* remote fault mask */ +#define IMASK_LOC_FAULT 0x00002000 /* local fault mask */ +#define IMASK_TX_ECC_ER 0x00001000 /* Tx frame ECC error mask */ +#define IMASK_TX_FIFO_UNFL 0x00000800 /* Tx FIFO underflow mask */ +#define IMASK_TX_ER 0x00000200 /* Tx frame error mask */ +#define IMASK_RX_FIFO_OVFL 0x00000100 /* Rx FIFO overflow mask */ +#define IMASK_RX_ECC_ER 0x00000080 /* Rx frame ECC error mask */ +#define IMASK_RX_JAB_FRM 0x00000040 /* Rx jabber frame mask */ +#define IMASK_RX_OVRSZ_FRM 0x00000020 /* Rx oversized frame mask */ +#define IMASK_RX_RUNT_FRM 0x00000010 /* Rx runt frame mask */ +#define IMASK_RX_FRAG_FRM 0x00000008 /* Rx fragment frame mask */ +#define IMASK_RX_LEN_ER 0x00000004 /* Rx payload length error mask */ +#define IMASK_RX_CRC_ER 0x00000002 /* Rx CRC error mask */ +#define IMASK_RX_ALIGN_ER 0x00000001 /* Rx alignment error mask */ + +#define IMASK_MASK_ALL 0x00000000 + +/* IEVENT - interrupt event register */ +#define IEVENT_MDIO_SCAN_EVENT 0x00010000 /* MDIO scan event */ +#define IEVENT_MDIO_CMD_CMPL 0x00008000 /* MDIO cmd completion */ +#define IEVENT_REM_FAULT 0x00004000 /* remote fault */ +#define IEVENT_LOC_FAULT 0x00002000 /* local fault */ +#define IEVENT_TX_ECC_ER 0x00001000 /* Tx frame ECC error */ +#define IEVENT_TX_FIFO_UNFL 0x00000800 /* Tx FIFO underflow */ +#define IEVENT_TX_ER 0x00000200 /* Tx frame error */ +#define IEVENT_RX_FIFO_OVFL 0x00000100 /* Rx FIFO overflow */ +#define IEVENT_RX_ECC_ER 0x00000080 /* Rx frame ECC error */ +#define IEVENT_RX_JAB_FRM 0x00000040 /* Rx jabber frame */ +#define IEVENT_RX_OVRSZ_FRM 0x00000020 /* Rx oversized frame */ +#define IEVENT_RX_RUNT_FRM 0x00000010 /* Rx runt frame */ +#define IEVENT_RX_FRAG_FRM 0x00000008 /* Rx fragment frame */ +#define IEVENT_RX_LEN_ER 0x00000004 /* Rx payload length error */ +#define IEVENT_RX_CRC_ER 0x00000002 /* Rx CRC error */ +#define IEVENT_RX_ALIGN_ER 0x00000001 /* Rx alignment error */ + +#define IEVENT_CLEAR_ALL 0xffffffff + +/* IF_MODE - Interface Mode Register */ +#define IF_MODE_EN_AUTO 0x00008000 /* 1 - Enable automatic speed selection */ +#define IF_MODE_SETSP_100M 0x00000000 /* 00 - 100Mbps RGMII */ +#define IF_MODE_SETSP_10M 0x00002000 /* 01 - 10Mbps RGMII */ +#define IF_MODE_SETSP_1000M 0x00004000 /* 10 - 1000Mbps RGMII */ +#define IF_MODE_SETSP_MASK 0x00006000 /* setsp mask bits */ +#define IF_MODE_XGMII 0x00000000 /* 00- XGMII(10) interface mode */ +#define IF_MODE_GMII 0x00000002 /* 10- GMII interface mode */ +#define IF_MODE_MASK 0x00000003 /* mask for mode interface mode */ +#define IF_MODE_RG 0x00000004 /* 1- RGMII */ + +#define IF_DEFAULT (IF_GMII) + +/* Internal PHY Registers - SGMII */ +#define PHY_SGMII_CR_PHY_RESET 0x8000 +#define PHY_SGMII_CR_RESET_AN 0x0200 +#define PHY_SGMII_CR_DEF_VAL 0x1140 +#define PHY_SGMII_IF_SPEED_GIGABIT 0x0008 +#define PHY_SGMII_DEV_ABILITY_SGMII 0x4001 +#define PHY_SGMII_IF_MODE_AN 0x0002 +#define PHY_SGMII_IF_MODE_SGMII 0x0001 + +struct memac_mdio_controller { + u32 res0[0xc]; + u32 mdio_stat; /* MDIO configuration and status */ + u32 mdio_ctl; /* MDIO control */ + u32 mdio_data; /* MDIO data */ + u32 mdio_addr; /* MDIO address */ +}; + +#define MDIO_STAT_CLKDIV(x) (((x>>1) & 0xff) << 8) +#define MDIO_STAT_BSY (1 << 0) +#define MDIO_STAT_RD_ER (1 << 1) +#define MDIO_STAT_PRE (1 << 5) +#define MDIO_STAT_ENC (1 << 6) +#define MDIO_STAT_HOLD_15_CLK (7 << 2) +#define MDIO_STAT_NEG (1 << 23) + +#define MDIO_CTL_DEV_ADDR(x) (x & 0x1f) +#define MDIO_CTL_PORT_ADDR(x) ((x & 0x1f) << 5) +#define MDIO_CTL_PRE_DIS (1 << 10) +#define MDIO_CTL_SCAN_EN (1 << 11) +#define MDIO_CTL_POST_INC (1 << 14) +#define MDIO_CTL_READ (1 << 15) + +#define MDIO_DATA(x) (x & 0xffff) +#define MDIO_DATA_BSY (1 << 31) + +#endif diff --git a/include/soc/fsl/fsl_qbman.h b/include/soc/fsl/fsl_qbman.h new file mode 100644 index 0000000000..4687eb9bb1 --- /dev/null +++ b/include/soc/fsl/fsl_qbman.h @@ -0,0 +1,74 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2017 NXP + */ + +#ifndef __FSL_QBMAN_H__ +#define __FSL_QBMAN_H__ +void fdt_fixup_qportals(void *blob); +void fdt_fixup_bportals(void *blob); +void inhibit_portals(void __iomem *addr, int max_portals, + int arch_max_portals, int portal_cinh_size); +void setup_qbman_portals(void); + +struct ccsr_qman { +#ifdef CONFIG_SYS_FSL_QMAN_V3 + u8 res0[0x200]; +#else + struct { + u32 qcsp_lio_cfg; /* 0x0 - SW Portal n LIO cfg */ + u32 qcsp_io_cfg; /* 0x4 - SW Portal n IO cfg */ + u32 res; + u32 qcsp_dd_cfg; /* 0xc - SW Portal Dynamic Debug cfg */ + } qcsp[32]; +#endif + /* Not actually reserved, but irrelevant to u-boot */ + u8 res[0xbf8 - 0x200]; + u32 ip_rev_1; + u32 ip_rev_2; + u32 fqd_bare; /* FQD Extended Base Addr Register */ + u32 fqd_bar; /* FQD Base Addr Register */ + u8 res1[0x8]; + u32 fqd_ar; /* FQD Attributes Register */ + u8 res2[0xc]; + u32 pfdr_bare; /* PFDR Extended Base Addr Register */ + u32 pfdr_bar; /* PFDR Base Addr Register */ + u8 res3[0x8]; + u32 pfdr_ar; /* PFDR Attributes Register */ + u8 res4[0x4c]; + u32 qcsp_bare; /* QCSP Extended Base Addr Register */ + u32 qcsp_bar; /* QCSP Base Addr Register */ + u8 res5[0x78]; + u32 ci_sched_cfg; /* Initiator Scheduling Configuration */ + u32 srcidr; /* Source ID Register */ + u32 liodnr; /* LIODN Register */ + u8 res6[4]; + u32 ci_rlm_cfg; /* Initiator Read Latency Monitor Cfg */ + u32 ci_rlm_avg; /* Initiator Read Latency Monitor Avg */ + u8 res7[0x2e8]; +#ifdef CONFIG_SYS_FSL_QMAN_V3 + struct { + u32 qcsp_lio_cfg; /* 0x0 - SW Portal n LIO cfg */ + u32 qcsp_io_cfg; /* 0x4 - SW Portal n IO cfg */ + u32 res; + u32 qcsp_dd_cfg; /* 0xc - SW Portal n Dynamic Debug cfg*/ + } qcsp[50]; +#endif +}; + +struct ccsr_bman { + /* Not actually reserved, but irrelevant to u-boot */ + u8 res[0xbf8]; + u32 ip_rev_1; + u32 ip_rev_2; + u32 fbpr_bare; /* FBPR Extended Base Addr Register */ + u32 fbpr_bar; /* FBPR Base Addr Register */ + u8 res1[0x8]; + u32 fbpr_ar; /* FBPR Attributes Register */ + u8 res2[0xf0]; + u32 srcidr; /* Source ID Register */ + u32 liodnr; /* LIODN Register */ + u8 res7[0x2f4]; +}; + +#endif /* __FSL_QBMAN_H__ */ diff --git a/include/soc/fsl/immap_lsch2.h b/include/soc/fsl/immap_lsch2.h new file mode 100644 index 0000000000..4eb6658788 --- /dev/null +++ b/include/soc/fsl/immap_lsch2.h @@ -0,0 +1,355 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2013-2015 Freescale Semiconductor, Inc. + */ + +#ifndef __ARCH_FSL_LSCH2_IMMAP_H__ +#define __ARCH_FSL_LSCH2_IMMAP_H__ + +#define gur_in32(a) in_be32(a) +#define gur_out32(a, v) out_be32(a, v) + +#define LSCH2_IMMR 0x01000000 + +#define LSCH2_DDR_ADDR (LSCH2_IMMR + 0x00080000) +#define LSCH2_CCI400_ADDR (LSCH2_IMMR + 0x00180000) +#define LSCH2_GIC400_ADDR (LSCH2_IMMR + 0x00400000) +#define LSCH2_IFC_ADDR (LSCH2_IMMR + 0x00530000) +#define LSCH2_QSPI0_BASE_ADDR (LSCH2_IMMR + 0x00550000) +#define LSCH2_ESDHC_ADDR (LSCH2_IMMR + 0x00560000) +#define LSCH2_CSU_ADDR (LSCH2_IMMR + 0x00510000) +#define LSCH2_SCFG_ADDR (LSCH2_IMMR + 0x00570000) +#define LSCH2_BMAN_ADDR (LSCH2_IMMR + 0x00890000) +#define LSCH2_QMAN_ADDR (LSCH2_IMMR + 0x00880000) +#define LSCH2_FM1_ADDR (LSCH2_IMMR + 0x00a00000) +#define LSCH2_FM1_DTSEC1_ADDR (LSCH2_IMMR + 0x00ae0000) +#define LSCH2_SEC_MON_ADDR (LSCH2_IMMR + 0x00e90000) +#define LSCH2_SFP_ADDR (LSCH2_IMMR + 0x00e80200) +#define LSCH2_GUTS_ADDR (LSCH2_IMMR + 0x00ee0000) +#define LSCH2_RST_ADDR (LSCH2_IMMR + 0x00ee00b0) +#define LSCH2_FMAN_ADDR (LSCH2_IMMR + 0x00a00000) +#define LSCH2_SERDES_ADDR (LSCH2_IMMR + 0x00ea0000) +#define LSCH2_DCFG_ADDR (LSCH2_IMMR + 0x00ee0000) +#define LSCH2_CLK_ADDR (LSCH2_IMMR + 0x00ee1000) +#define LSCH2_DSPI1_BASE_ADDR (LSCH2_IMMR + 0x01100000) +#define LSCH2_I2C1_BASE_ADDR (LSCH2_IMMR + 0x01180000) +#define LSCH2_I2C2_BASE_ADDR (LSCH2_IMMR + 0x01190000) +#define LSCH2_I2C3_BASE_ADDR (LSCH2_IMMR + 0x011a0000) +#define LSCH2_I2C4_BASE_ADDR (LSCH2_IMMR + 0x011b0000) +#define LSCH2_NS16550_COM1 (LSCH2_IMMR + 0x011c0500) +#define LSCH2_NS16550_COM2 (LSCH2_IMMR + 0x011c0600) +#define LSCH2_NS16550_COM3 (LSCH2_IMMR + 0x011d0500) +#define LSCH2_NS16550_COM4 (LSCH2_IMMR + 0x011d0600) +#define LSCH2_GPIO1_BASE_ADDR (LSCH2_IMMR + 0x01300000) +#define LSCH2_GPIO2_BASE_ADDR (LSCH2_IMMR + 0x01310000) +#define LSCH2_GPIO3_BASE_ADDR (LSCH2_IMMR + 0x01320000) +#define LSCH2_GPIO4_BASE_ADDR (LSCH2_IMMR + 0x01330000) +#define LSCH2_QE_BASE_ADDR (LSCH2_IMMR + 0x01400000) +#define LSCH2_LPUART_BASE (LSCH2_IMMR + 0x01950000) +#define LSCH2_WDOG1_BASE_ADDR (LSCH2_IMMR + 0x01ad0000) +#define LSCH2_SYS_COUNTER_ADDR (LSCH2_IMMR + 0x01b00000) +#define LSCH2_EDMA_BASE_ADDR (LSCH2_IMMR + 0x01c00000) +#define LSCH2_XHCI_USB1_ADDR (LSCH2_IMMR + 0x01f00000) +#define LSCH2_XHCI_USB2_ADDR (LSCH2_IMMR + 0x02000000) +#define LSCH2_XHCI_USB3_ADDR (LSCH2_IMMR + 0x02100000) +#define LSCH2_HCI_BASE_ADDR (LSCH2_IMMR + 0x02200000) +#define LSCH2_PCIE1_ADDR (LSCH2_IMMR + 0x02400000) +#define LSCH2_PCIE2_ADDR (LSCH2_IMMR + 0x02500000) +#define LSCH2_PCIE3_ADDR (LSCH2_IMMR + 0x02600000) +#define LSCH2_QDMA_BASE_ADDR (LSCH2_IMMR + 0x07380000) +#define LSCH2_EHCI_USB1_ADDR (LSCH2_IMMR + 0x07600000) + +struct ccsr_gur { + u32 porsr1; /* POR status 1 */ +#define FSL_CHASSIS2_CCSR_PORSR1_RCW_MASK 0xFF800000 + u32 porsr2; /* POR status 2 */ + u8 res_008[0x20-0x8]; + u32 gpporcr1; /* General-purpose POR configuration */ + u32 gpporcr2; +#define FSL_CHASSIS2_DCFG_FUSESR_VID_SHIFT 25 +#define FSL_CHASSIS2_DCFG_FUSESR_VID_MASK 0x1F +#define FSL_CHASSIS2_DCFG_FUSESR_ALTVID_SHIFT 20 +#define FSL_CHASSIS2_DCFG_FUSESR_ALTVID_MASK 0x1F + u32 dcfg_fusesr; /* Fuse status register */ + u8 res_02c[0x70-0x2c]; + u32 devdisr; /* Device disable control */ +#define FSL_CHASSIS2_DEVDISR2_DTSEC1_1 0x80000000 +#define FSL_CHASSIS2_DEVDISR2_DTSEC1_2 0x40000000 +#define FSL_CHASSIS2_DEVDISR2_DTSEC1_3 0x20000000 +#define FSL_CHASSIS2_DEVDISR2_DTSEC1_4 0x10000000 +#define FSL_CHASSIS2_DEVDISR2_DTSEC1_5 0x08000000 +#define FSL_CHASSIS2_DEVDISR2_DTSEC1_6 0x04000000 +#define FSL_CHASSIS2_DEVDISR2_DTSEC1_9 0x00800000 +#define FSL_CHASSIS2_DEVDISR2_DTSEC1_10 0x00400000 +#define FSL_CHASSIS2_DEVDISR2_10GEC1_1 0x00800000 +#define FSL_CHASSIS2_DEVDISR2_10GEC1_2 0x00400000 +#define FSL_CHASSIS2_DEVDISR2_10GEC1_3 0x80000000 +#define FSL_CHASSIS2_DEVDISR2_10GEC1_4 0x40000000 + u32 devdisr2; /* Device disable control 2 */ + u32 devdisr3; /* Device disable control 3 */ + u32 devdisr4; /* Device disable control 4 */ + u32 devdisr5; /* Device disable control 5 */ + u32 devdisr6; /* Device disable control 6 */ + u32 devdisr7; /* Device disable control 7 */ + u8 res_08c[0x94-0x8c]; + u32 coredisru; /* uppper portion for support of 64 cores */ + u32 coredisrl; /* lower portion for support of 64 cores */ + u8 res_09c[0xa0-0x9c]; + u32 pvr; /* Processor version */ + u32 svr; /* System version */ + u32 mvr; /* Manufacturing version */ + u8 res_0ac[0xb0-0xac]; + u32 rstcr; /* Reset control */ + u32 rstrqpblsr; /* Reset request preboot loader status */ + u8 res_0b8[0xc0-0xb8]; + u32 rstrqmr1; /* Reset request mask */ + u8 res_0c4[0xc8-0xc4]; + u32 rstrqsr1; /* Reset request status */ + u8 res_0cc[0xd4-0xcc]; + u32 rstrqwdtmrl; /* Reset request WDT mask */ + u8 res_0d8[0xdc-0xd8]; + u32 rstrqwdtsrl; /* Reset request WDT status */ + u8 res_0e0[0xe4-0xe0]; + u32 brrl; /* Boot release */ + u8 res_0e8[0x100-0xe8]; + u32 rcwsr[16]; /* Reset control word status */ +#define FSL_CHASSIS2_RCWSR0_SYS_PLL_RAT_SHIFT 25 +#define FSL_CHASSIS2_RCWSR0_SYS_PLL_RAT_MASK 0x1f +#define FSL_CHASSIS2_RCWSR0_MEM_PLL_RAT_SHIFT 16 +#define FSL_CHASSIS2_RCWSR0_MEM_PLL_RAT_MASK 0x3f +#define FSL_CHASSIS2_RCWSR4_SRDS1_PRTCL_MASK 0xffff0000 +#define FSL_CHASSIS2_RCWSR4_SRDS1_PRTCL_SHIFT 16 +#define FSL_CHASSIS2_RCWSR4_SRDS2_PRTCL_MASK 0x0000ffff +#define FSL_CHASSIS2_RCWSR4_SRDS2_PRTCL_SHIFT 0 +#define RCW_SB_EN_REG_INDEX 7 +#define RCW_SB_EN_MASK 0x00200000 + + u8 res_140[0x200-0x140]; + u32 scratchrw[4]; /* Scratch Read/Write */ + u8 res_210[0x300-0x210]; + u32 scratchw1r[4]; /* Scratch Read (Write once) */ + u8 res_310[0x400-0x310]; + u32 crstsr[12]; + u8 res_430[0x500-0x430]; + + /* PCI Express n Logical I/O Device Number register */ + u32 dcfg_ccsr_pex1liodnr; + u32 dcfg_ccsr_pex2liodnr; + u32 dcfg_ccsr_pex3liodnr; + u32 dcfg_ccsr_pex4liodnr; + /* RIO n Logical I/O Device Number register */ + u32 dcfg_ccsr_rio1liodnr; + u32 dcfg_ccsr_rio2liodnr; + u32 dcfg_ccsr_rio3liodnr; + u32 dcfg_ccsr_rio4liodnr; + /* USB Logical I/O Device Number register */ + u32 dcfg_ccsr_usb1liodnr; + u32 dcfg_ccsr_usb2liodnr; + u32 dcfg_ccsr_usb3liodnr; + u32 dcfg_ccsr_usb4liodnr; + /* SD/MMC Logical I/O Device Number register */ + u32 dcfg_ccsr_sdmmc1liodnr; + u32 dcfg_ccsr_sdmmc2liodnr; + u32 dcfg_ccsr_sdmmc3liodnr; + u32 dcfg_ccsr_sdmmc4liodnr; + /* RIO Message Unit Logical I/O Device Number register */ + u32 dcfg_ccsr_riomaintliodnr; + + u8 res_544[0x550-0x544]; + u32 sataliodnr[4]; + u8 res_560[0x570-0x560]; + + u32 dcfg_ccsr_misc1liodnr; + u32 dcfg_ccsr_misc2liodnr; + u32 dcfg_ccsr_misc3liodnr; + u32 dcfg_ccsr_misc4liodnr; + u32 dcfg_ccsr_dma1liodnr; + u32 dcfg_ccsr_dma2liodnr; + u32 dcfg_ccsr_dma3liodnr; + u32 dcfg_ccsr_dma4liodnr; + u32 dcfg_ccsr_spare1liodnr; + u32 dcfg_ccsr_spare2liodnr; + u32 dcfg_ccsr_spare3liodnr; + u32 dcfg_ccsr_spare4liodnr; + u8 res_5a0[0x600-0x5a0]; + u32 dcfg_ccsr_pblsr; + + u32 pamubypenr; + u32 dmacr1; + + u8 res_60c[0x610-0x60c]; + u32 dcfg_ccsr_gensr1; + u32 dcfg_ccsr_gensr2; + u32 dcfg_ccsr_gensr3; + u32 dcfg_ccsr_gensr4; + u32 dcfg_ccsr_gencr1; + u32 dcfg_ccsr_gencr2; + u32 dcfg_ccsr_gencr3; + u32 dcfg_ccsr_gencr4; + u32 dcfg_ccsr_gencr5; + u32 dcfg_ccsr_gencr6; + u32 dcfg_ccsr_gencr7; + u8 res_63c[0x658-0x63c]; + u32 dcfg_ccsr_cgensr1; + u32 dcfg_ccsr_cgensr0; + u8 res_660[0x678-0x660]; + u32 dcfg_ccsr_cgencr1; + + u32 dcfg_ccsr_cgencr0; + u8 res_680[0x700-0x680]; + u32 dcfg_ccsr_sriopstecr; + u32 dcfg_ccsr_dcsrcr; + + u8 res_708[0x740-0x708]; /* add more registers when needed */ + u32 tp_ityp[64]; /* Topology Initiator Type Register */ + struct { + u32 upper; + u32 lower; + } tp_cluster[16]; + u8 res_8c0[0xa00-0x8c0]; /* add more registers when needed */ + u32 dcfg_ccsr_qmbm_warmrst; + u8 res_a04[0xa20-0xa04]; /* add more registers when needed */ + u32 dcfg_ccsr_reserved0; + u32 dcfg_ccsr_reserved1; +}; + +#define SCFG_QSPI_CLKSEL 0x40100000 +#define SCFG_USBDRVVBUS_SELCR_USB1 0x00000000 +#define SCFG_USBDRVVBUS_SELCR_USB2 0x00000001 +#define SCFG_USBDRVVBUS_SELCR_USB3 0x00000002 +#define SCFG_USBPWRFAULT_INACTIVE 0x00000000 +#define SCFG_USBPWRFAULT_SHARED 0x00000001 +#define SCFG_USBPWRFAULT_DEDICATED 0x00000002 +#define SCFG_USBPWRFAULT_USB3_SHIFT 4 +#define SCFG_USBPWRFAULT_USB2_SHIFT 2 +#define SCFG_USBPWRFAULT_USB1_SHIFT 0 + +#define SCFG_USB3PRM1CR_USB1 0x070 +#define SCFG_USB3PRM2CR_USB1 0x074 +#define SCFG_USB3PRM1CR_USB2 0x07C +#define SCFG_USB3PRM2CR_USB2 0x080 +#define SCFG_USB3PRM1CR_USB3 0x088 +#define SCFG_USB3PRM2CR_USB3 0x08c +#define SCFG_USB_TXVREFTUNE 0x9 +#define SCFG_USB_SQRXTUNE_MASK 0x7 +#define SCFG_USB_PCSTXSWINGFULL 0x47 +#define SCFG_USB_PHY1 0x084F0000 +#define SCFG_USB_PHY2 0x08500000 +#define SCFG_USB_PHY3 0x08510000 +#define SCFG_USB_PHY_RX_OVRD_IN_HI 0x200c +#define USB_PHY_RX_EQ_VAL_1 0x0000 +#define USB_PHY_RX_EQ_VAL_2 0x0080 +#define USB_PHY_RX_EQ_VAL_3 0x0380 +#define USB_PHY_RX_EQ_VAL_4 0x0b80 + +#define SCFG_SNPCNFGCR_SECRDSNP 0x80000000 +#define SCFG_SNPCNFGCR_SECWRSNP 0x40000000 +#define SCFG_SNPCNFGCR_SATARDSNP 0x00800000 +#define SCFG_SNPCNFGCR_SATAWRSNP 0x00400000 + +/* RGMIIPCR bit definitions*/ +#define SCFG_RGMIIPCR_EN_AUTO BIT(3) +#define SCFG_RGMIIPCR_SETSP_1000M BIT(2) +#define SCFG_RGMIIPCR_SETSP_100M 0 +#define SCFG_RGMIIPCR_SETSP_10M BIT(1) +#define SCFG_RGMIIPCR_SETFD BIT(0) + +/* PFEASBCR bit definitions */ +#define SCFG_PFEASBCR_ARCACHE0 BIT(31) +#define SCFG_PFEASBCR_AWCACHE0 BIT(30) +#define SCFG_PFEASBCR_ARCACHE1 BIT(29) +#define SCFG_PFEASBCR_AWCACHE1 BIT(28) +#define SCFG_PFEASBCR_ARSNP BIT(27) +#define SCFG_PFEASBCR_AWSNP BIT(26) + +/* WR_QoS1 PFE bit definitions */ +#define SCFG_WR_QOS1_PFE1_QOS GENMASK(27, 24) +#define SCFG_WR_QOS1_PFE2_QOS GENMASK(23, 20) + +/* RD_QoS1 PFE bit definitions */ +#define SCFG_RD_QOS1_PFE1_QOS GENMASK(27, 24) +#define SCFG_RD_QOS1_PFE2_QOS GENMASK(23, 20) + +/* Supplemental Configuration Unit */ +struct ccsr_scfg { + u8 res_000[0x100-0x000]; + u32 usb2_icid; + u32 usb3_icid; + u8 res_108[0x114-0x108]; + u32 dma_icid; + u32 sata_icid; + u32 usb1_icid; + u32 qe_icid; + u32 sdhc_icid; + u32 edma_icid; + u32 etr_icid; + u32 core_sft_rst[4]; + u8 res_140[0x158-0x140]; + u32 altcbar; + u32 qspi_cfg; + u8 res_160[0x164 - 0x160]; + u32 wr_qos1; + u32 wr_qos2; + u32 rd_qos1; + u32 rd_qos2; + u8 res_174[0x180 - 0x174]; + u32 dmamcr; + u8 res_184[0x188-0x184]; + u32 gic_align; + u32 debug_icid; + u8 res_190[0x1a4-0x190]; + u32 snpcnfgcr; + u8 res_1a8[0x1ac-0x1a8]; + u32 intpcr; + u8 res_1b0[0x204-0x1b0]; + u32 coresrencr; + u8 res_208[0x220-0x208]; + u32 rvbar0_0; + u32 rvbar0_1; + u32 rvbar1_0; + u32 rvbar1_1; + u32 rvbar2_0; + u32 rvbar2_1; + u32 rvbar3_0; + u32 rvbar3_1; + u32 lpmcsr; + u8 res_244[0x400-0x244]; + u32 qspidqscr; + u32 ecgtxcmcr; + u32 sdhciovselcr; + u32 rcwpmuxcr0; + u32 usbdrvvbus_selcr; + u32 usbpwrfault_selcr; + u32 usb_refclk_selcr1; + u32 usb_refclk_selcr2; + u32 usb_refclk_selcr3; + u8 res_424[0x434 - 0x424]; + u32 rgmiipcr; + u32 res_438; + u32 rgmiipsr; + u32 pfepfcssr1; + u32 pfeintencr1; + u32 pfepfcssr2; + u32 pfeintencr2; + u32 pfeerrcr; + u32 pfeeerrintencr; + u32 pfeasbcr; + u32 pfebsbcr; + u8 res_460[0x484 - 0x460]; + u32 mdioselcr; + u8 res_468[0x600 - 0x488]; + u32 scratchrw[4]; + u8 res_610[0x680-0x610]; + u32 corebcr; + u8 res_684[0x1000-0x684]; + u32 pex1msiir; + u32 pex1msir; + u8 res_1008[0x2000-0x1008]; + u32 pex2; + u32 pex2msir; + u8 res_2008[0x3000-0x2008]; + u32 pex3msiir; + u32 pex3msir; +}; + +#endif /* __ARCH_FSL_LSCH2_IMMAP_H__*/ diff --git a/include/soc/fsl/qe.h b/include/soc/fsl/qe.h new file mode 100644 index 0000000000..26afd92471 --- /dev/null +++ b/include/soc/fsl/qe.h @@ -0,0 +1,264 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (C) 2006-2009 Freescale Semiconductor, Inc. + * + * Dave Liu <daveliu@freescale.com> + * based on source code of Shlomi Gridish + */ + +#ifndef __QE_H__ +#define __QE_H__ + +#define QE_NUM_OF_BRGS 16 +#define UCC_MAX_NUM 8 + +#define QE_DATAONLY_BASE 0 +#define QE_DATAONLY_SIZE (QE_MURAM_SIZE - QE_DATAONLY_BASE) + +/* QE threads SNUM +*/ +typedef enum qe_snum_state { + QE_SNUM_STATE_USED, /* used */ + QE_SNUM_STATE_FREE /* free */ +} qe_snum_state_e; + +typedef struct qe_snum { + u8 num; /* snum */ + qe_snum_state_e state; /* state */ +} qe_snum_t; + +/* QE RISC allocation +*/ +#define QE_RISC_ALLOCATION_RISC1 0x1 /* RISC 1 */ +#define QE_RISC_ALLOCATION_RISC2 0x2 /* RISC 2 */ +#define QE_RISC_ALLOCATION_RISC3 0x4 /* RISC 3 */ +#define QE_RISC_ALLOCATION_RISC4 0x8 /* RISC 4 */ +#define QE_RISC_ALLOCATION_RISC1_AND_RISC2 (QE_RISC_ALLOCATION_RISC1 | \ + QE_RISC_ALLOCATION_RISC2) +#define QE_RISC_ALLOCATION_FOUR_RISCS (QE_RISC_ALLOCATION_RISC1 | \ + QE_RISC_ALLOCATION_RISC2 | \ + QE_RISC_ALLOCATION_RISC3 | \ + QE_RISC_ALLOCATION_RISC4) + +/* QE CECR commands for UCC fast. +*/ +#define QE_CR_FLG 0x00010000 +#define QE_RESET 0x80000000 +#define QE_INIT_TX_RX 0x00000000 +#define QE_INIT_RX 0x00000001 +#define QE_INIT_TX 0x00000002 +#define QE_ENTER_HUNT_MODE 0x00000003 +#define QE_STOP_TX 0x00000004 +#define QE_GRACEFUL_STOP_TX 0x00000005 +#define QE_RESTART_TX 0x00000006 +#define QE_SWITCH_COMMAND 0x00000007 +#define QE_SET_GROUP_ADDRESS 0x00000008 +#define QE_INSERT_CELL 0x00000009 +#define QE_ATM_TRANSMIT 0x0000000a +#define QE_CELL_POOL_GET 0x0000000b +#define QE_CELL_POOL_PUT 0x0000000c +#define QE_IMA_HOST_CMD 0x0000000d +#define QE_ATM_MULTI_THREAD_INIT 0x00000011 +#define QE_ASSIGN_PAGE 0x00000012 +#define QE_START_FLOW_CONTROL 0x00000014 +#define QE_STOP_FLOW_CONTROL 0x00000015 +#define QE_ASSIGN_PAGE_TO_DEVICE 0x00000016 +#define QE_GRACEFUL_STOP_RX 0x0000001a +#define QE_RESTART_RX 0x0000001b + +/* QE CECR Sub Block Code - sub block code of QE command. +*/ +#define QE_CR_SUBBLOCK_INVALID 0x00000000 +#define QE_CR_SUBBLOCK_USB 0x03200000 +#define QE_CR_SUBBLOCK_UCCFAST1 0x02000000 +#define QE_CR_SUBBLOCK_UCCFAST2 0x02200000 +#define QE_CR_SUBBLOCK_UCCFAST3 0x02400000 +#define QE_CR_SUBBLOCK_UCCFAST4 0x02600000 +#define QE_CR_SUBBLOCK_UCCFAST5 0x02800000 +#define QE_CR_SUBBLOCK_UCCFAST6 0x02a00000 +#define QE_CR_SUBBLOCK_UCCFAST7 0x02c00000 +#define QE_CR_SUBBLOCK_UCCFAST8 0x02e00000 +#define QE_CR_SUBBLOCK_UCCSLOW1 0x00000000 +#define QE_CR_SUBBLOCK_UCCSLOW2 0x00200000 +#define QE_CR_SUBBLOCK_UCCSLOW3 0x00400000 +#define QE_CR_SUBBLOCK_UCCSLOW4 0x00600000 +#define QE_CR_SUBBLOCK_UCCSLOW5 0x00800000 +#define QE_CR_SUBBLOCK_UCCSLOW6 0x00a00000 +#define QE_CR_SUBBLOCK_UCCSLOW7 0x00c00000 +#define QE_CR_SUBBLOCK_UCCSLOW8 0x00e00000 +#define QE_CR_SUBBLOCK_MCC1 0x03800000 +#define QE_CR_SUBBLOCK_MCC2 0x03a00000 +#define QE_CR_SUBBLOCK_MCC3 0x03000000 +#define QE_CR_SUBBLOCK_IDMA1 0x02800000 +#define QE_CR_SUBBLOCK_IDMA2 0x02a00000 +#define QE_CR_SUBBLOCK_IDMA3 0x02c00000 +#define QE_CR_SUBBLOCK_IDMA4 0x02e00000 +#define QE_CR_SUBBLOCK_HPAC 0x01e00000 +#define QE_CR_SUBBLOCK_SPI1 0x01400000 +#define QE_CR_SUBBLOCK_SPI2 0x01600000 +#define QE_CR_SUBBLOCK_RAND 0x01c00000 +#define QE_CR_SUBBLOCK_TIMER 0x01e00000 +#define QE_CR_SUBBLOCK_GENERAL 0x03c00000 + +/* QE CECR Protocol - For non-MCC, specifies mode for QE CECR command. +*/ +#define QE_CR_PROTOCOL_UNSPECIFIED 0x00 /* For all other protocols */ +#define QE_CR_PROTOCOL_HDLC_TRANSPARENT 0x00 +#define QE_CR_PROTOCOL_ATM_POS 0x0A +#define QE_CR_PROTOCOL_ETHERNET 0x0C +#define QE_CR_PROTOCOL_L2_SWITCH 0x0D +#define QE_CR_PROTOCOL_SHIFT 6 + +/* QE ASSIGN PAGE command +*/ +#define QE_CR_ASSIGN_PAGE_SNUM_SHIFT 17 + +/* Communication Direction. +*/ +typedef enum comm_dir { + COMM_DIR_NONE = 0, + COMM_DIR_RX = 1, + COMM_DIR_TX = 2, + COMM_DIR_RX_AND_TX = 3 +} comm_dir_e; + +/* Clocks and BRG's +*/ +typedef enum qe_clock { + QE_CLK_NONE = 0, + QE_BRG1, /* Baud Rate Generator 1 */ + QE_BRG2, /* Baud Rate Generator 2 */ + QE_BRG3, /* Baud Rate Generator 3 */ + QE_BRG4, /* Baud Rate Generator 4 */ + QE_BRG5, /* Baud Rate Generator 5 */ + QE_BRG6, /* Baud Rate Generator 6 */ + QE_BRG7, /* Baud Rate Generator 7 */ + QE_BRG8, /* Baud Rate Generator 8 */ + QE_BRG9, /* Baud Rate Generator 9 */ + QE_BRG10, /* Baud Rate Generator 10 */ + QE_BRG11, /* Baud Rate Generator 11 */ + QE_BRG12, /* Baud Rate Generator 12 */ + QE_BRG13, /* Baud Rate Generator 13 */ + QE_BRG14, /* Baud Rate Generator 14 */ + QE_BRG15, /* Baud Rate Generator 15 */ + QE_BRG16, /* Baud Rate Generator 16 */ + QE_CLK1, /* Clock 1 */ + QE_CLK2, /* Clock 2 */ + QE_CLK3, /* Clock 3 */ + QE_CLK4, /* Clock 4 */ + QE_CLK5, /* Clock 5 */ + QE_CLK6, /* Clock 6 */ + QE_CLK7, /* Clock 7 */ + QE_CLK8, /* Clock 8 */ + QE_CLK9, /* Clock 9 */ + QE_CLK10, /* Clock 10 */ + QE_CLK11, /* Clock 11 */ + QE_CLK12, /* Clock 12 */ + QE_CLK13, /* Clock 13 */ + QE_CLK14, /* Clock 14 */ + QE_CLK15, /* Clock 15 */ + QE_CLK16, /* Clock 16 */ + QE_CLK17, /* Clock 17 */ + QE_CLK18, /* Clock 18 */ + QE_CLK19, /* Clock 19 */ + QE_CLK20, /* Clock 20 */ + QE_CLK21, /* Clock 21 */ + QE_CLK22, /* Clock 22 */ + QE_CLK23, /* Clock 23 */ + QE_CLK24, /* Clock 24 */ + QE_CLK_DUMMY +} qe_clock_e; + +/* QE CMXGCR register +*/ +#define QE_CMXGCR_MII_ENET_MNG_MASK 0x00007000 +#define QE_CMXGCR_MII_ENET_MNG_SHIFT 12 + +/* QE CMXUCR registers + */ +#define QE_CMXUCR_TX_CLK_SRC_MASK 0x0000000F + +/* QE BRG configuration register +*/ +#define QE_BRGC_ENABLE 0x00010000 +#define QE_BRGC_DIVISOR_SHIFT 1 +#define QE_BRGC_DIVISOR_MAX 0xFFF +#define QE_BRGC_DIV16 1 + +/* QE SDMA registers +*/ +#define QE_SDSR_BER1 0x02000000 +#define QE_SDSR_BER2 0x01000000 + +#define QE_SDMR_GLB_1_MSK 0x80000000 +#define QE_SDMR_ADR_SEL 0x20000000 +#define QE_SDMR_BER1_MSK 0x02000000 +#define QE_SDMR_BER2_MSK 0x01000000 +#define QE_SDMR_EB1_MSK 0x00800000 +#define QE_SDMR_ER1_MSK 0x00080000 +#define QE_SDMR_ER2_MSK 0x00040000 +#define QE_SDMR_CEN_MASK 0x0000E000 +#define QE_SDMR_SBER_1 0x00000200 +#define QE_SDMR_SBER_2 0x00000200 +#define QE_SDMR_EB1_PR_MASK 0x000000C0 +#define QE_SDMR_ER1_PR 0x00000008 + +#define QE_SDMR_CEN_SHIFT 13 +#define QE_SDMR_EB1_PR_SHIFT 6 + +#define QE_SDTM_MSNUM_SHIFT 24 + +#define QE_SDEBCR_BA_MASK 0x01FFFFFF + +/* Communication Processor */ +#define QE_CP_CERCR_MEE 0x8000 /* Multi-user RAM ECC enable */ +#define QE_CP_CERCR_IEE 0x4000 /* Instruction RAM ECC enable */ +#define QE_CP_CERCR_CIR 0x0800 /* Common instruction RAM */ + +/* I-RAM */ +#define QE_IRAM_IADD_AIE 0x80000000 /* Auto Increment Enable */ +#define QE_IRAM_IADD_BADDR 0x00080000 /* Base Address */ +#define QE_IRAM_READY 0x80000000 + +/* Structure that defines QE firmware binary files. + * + * See doc/README.qe_firmware for a description of these fields. + */ +struct qe_firmware { + struct qe_header { + u32 length; /* Length of the entire structure, in bytes */ + u8 magic[3]; /* Set to { 'Q', 'E', 'F' } */ + u8 version; /* Version of this layout. First ver is '1' */ + } header; + u8 id[62]; /* Null-terminated identifier string */ + u8 split; /* 0 = shared I-RAM, 1 = split I-RAM */ + u8 count; /* Number of microcode[] structures */ + struct { + u16 model; /* The SOC model */ + u8 major; /* The SOC revision major */ + u8 minor; /* The SOC revision minor */ + } __attribute__ ((packed)) soc; + u8 padding[4]; /* Reserved, for alignment */ + u64 extended_modes; /* Extended modes */ + u32 vtraps[8]; /* Virtual trap addresses */ + u8 reserved[4]; /* Reserved, for future expansion */ + struct qe_microcode { + u8 id[32]; /* Null-terminated identifier */ + u32 traps[16]; /* Trap addresses, 0 == ignore */ + u32 eccr; /* The value for the ECCR register */ + u32 iram_offset;/* Offset into I-RAM for the code */ + u32 count; /* Number of 32-bit words of the code */ + u32 code_offset;/* Offset of the actual microcode */ + u8 major; /* The microcode version major */ + u8 minor; /* The microcode version minor */ + u8 revision; /* The microcode version revision */ + u8 padding; /* Reserved, for alignment */ + u8 reserved[4]; /* Reserved, for future expansion */ + } __attribute__ ((packed)) microcode[1]; + /* All microcode binaries should be located here */ + /* CRC32 should be located here, after the microcode binaries */ +} __attribute__ ((packed)); + +int qe_validate_firmware(const struct qe_firmware *firmware, int size); + +#endif /* __QE_H__ */ diff --git a/include/usb/usb.h b/include/usb/usb.h index eb2eeb8db3..4698308df4 100644 --- a/include/usb/usb.h +++ b/include/usb/usb.h @@ -172,7 +172,6 @@ int usb_bulk_msg(struct usb_device *dev, unsigned int pipe, void *data, int len, int *actual_length, int timeout); int usb_submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer, int transfer_len, int interval); -void usb_disable_asynch(int disable); int usb_maxpacket(struct usb_device *dev, unsigned long pipe); int usb_get_configuration_no(struct usb_device *dev, unsigned char *buffer, int cfgno); diff --git a/lib/Kconfig b/lib/Kconfig index b0839e6c6e..27f62461f0 100644 --- a/lib/Kconfig +++ b/lib/Kconfig @@ -63,7 +63,7 @@ config GENERIC_FIND_NEXT_BIT config PROCESS_ESCAPE_SEQUENCE def_bool n -source lib/lzo/Kconfig +source "lib/lzo/Kconfig" config BCH bool @@ -93,6 +93,10 @@ config IMAGE_SPARSE config STMP_DEVICE bool +config FSL_QE_FIRMWARE + select CRC32 + bool + config RATP select CRC_ITU_T bool "RATP protocol support" @@ -125,13 +129,13 @@ config CRC8 when they need to do cyclic redundancy check according CRC8 algorithm. Module will be called crc8. -source lib/gui/Kconfig +source "lib/gui/Kconfig" -source lib/fonts/Kconfig +source "lib/fonts/Kconfig" -source lib/logo/Kconfig +source "lib/logo/Kconfig" -source lib/bootstrap/Kconfig +source "lib/bootstrap/Kconfig" config PRINTF_UUID bool diff --git a/lib/Makefile b/lib/Makefile index 763516d41a..8dabf4ae77 100644 --- a/lib/Makefile +++ b/lib/Makefile @@ -68,6 +68,7 @@ obj-y += clz_ctz.o obj-$(CONFIG_CRC_CCITT) += crc-ccitt.o obj-$(CONFIG_CRC8) += crc8.o obj-$(CONFIG_NLS) += nls_base.o +obj-$(CONFIG_FSL_QE_FIRMWARE) += fsl-qe-firmware.o # GCC library routines obj-$(CONFIG_GENERIC_LIB_ASHLDI3) += ashldi3.o diff --git a/lib/fsl-qe-firmware.c b/lib/fsl-qe-firmware.c new file mode 100644 index 0000000000..960703f561 --- /dev/null +++ b/lib/fsl-qe-firmware.c @@ -0,0 +1,64 @@ +// SPDX-License-Identifier: GPL-2.0+ + +#include <common.h> +#include <crc.h> +#include <soc/fsl/qe.h> + +/* + * qe_validate_firmware - Validate a QE firmware + * + * This function checks a QE firmware for validity. It checks the crc + * and consistency of various fields. Returns 0 for success or a negative + * error code otherwise. + */ +int qe_validate_firmware(const struct qe_firmware *firmware, int size) +{ + u32 crc; + size_t calc_size; + int i; + const struct qe_header *hdr = &firmware->header; + + if (size < sizeof(*firmware)) { + pr_err("firmware is too small\n"); + return -EINVAL; + } + + if ((hdr->magic[0] != 'Q') || (hdr->magic[1] != 'E') || + (hdr->magic[2] != 'F')) { + pr_err("Data at %p is not a QE firmware\n", firmware); + return -EPERM; + } + + if (size != be32_to_cpu(hdr->length)) { + pr_err("Firmware size doesn't match size in header\n"); + return -EINVAL; + } + + if (hdr->version != 1) { + pr_err("Unsupported firmware version %u\n", hdr->version); + return -EPERM; + } + + calc_size = sizeof(*firmware) + + (firmware->count - 1) * sizeof(struct qe_microcode); + + if (size < calc_size) + return -EINVAL; + + for (i = 0; i < firmware->count; i++) + calc_size += sizeof(u32) * + be32_to_cpu(firmware->microcode[i].count); + + if (size != calc_size + sizeof(u32)) { + pr_err("Invalid length in firmware header\n"); + return -EPERM; + } + + crc = be32_to_cpu(*(u32 *)((void *)firmware + calc_size)); + if (crc != (crc32_no_comp(0, (const void *)firmware, calc_size))) { + pr_err("Firmware CRC is invalid\n"); + return -EIO; + } + + return 0; +} diff --git a/lib/libfile.c b/lib/libfile.c index 9a223d2328..eb12d158d8 100644 --- a/lib/libfile.c +++ b/lib/libfile.c @@ -323,10 +323,9 @@ int copy_file(const char *src, const char *dst, int verbose) { char *rw_buf = NULL; int srcfd = 0, dstfd = 0; - int r, w; + int r; int ret = 1, err1 = 0; int mode; - void *buf; int total = 0; struct stat srcstat, dststat; @@ -370,18 +369,13 @@ int copy_file(const char *src, const char *dst, int verbose) if (!r) break; - buf = rw_buf; - while (r) { - w = write(dstfd, buf, r); - if (w < 0) { - perror("write"); - goto out; - } - buf += w; - r -= w; - total += w; + if (write_full(dstfd, rw_buf, r) < 0) { + perror("write"); + goto out; } + total += r; + if (verbose) { if (srcstat.st_size && srcstat.st_size != FILESIZE_MAX) show_progress(total); @@ -522,12 +516,12 @@ err_out1: * @mode: The file open mode * @pos: The position to lseek to * - * Return: If successful this function returns a positive filedescriptor - * number, otherwise a negative error code is returned + * Return: If successful this function returns a positive + * filedescriptor number, otherwise -1 is returned */ int open_and_lseek(const char *filename, int mode, loff_t pos) { - int fd, ret; + int fd; fd = open(filename, mode); if (fd < 0) { @@ -541,28 +535,26 @@ int open_and_lseek(const char *filename, int mode, loff_t pos) if (mode & (O_WRONLY | O_RDWR)) { struct stat s; - ret = fstat(fd, &s); - if (ret) { + if (fstat(fd, &s)) { perror("fstat"); - return ret; + goto out; } - if (s.st_size < pos) { - ret = ftruncate(fd, pos); - if (ret) { - perror("ftruncate"); - return ret; - } + if (s.st_size < pos && ftruncate(fd, pos)) { + perror("ftruncate"); + goto out; } } if (lseek(fd, pos, SEEK_SET) != pos) { perror("lseek"); - close(fd); - return -errno; + goto out; } return fd; +out: + close(fd); + return -1; } /** diff --git a/scripts/Kconfig b/scripts/Kconfig index 14a577ac4f..20530b9ae3 100644 --- a/scripts/Kconfig +++ b/scripts/Kconfig @@ -10,7 +10,7 @@ config COMPILE_HOST_TOOLS This is usefull for compile coverage testing and for packaging the host tools. -source scripts/imx/Kconfig +source "scripts/imx/Kconfig" config MVEBU_HOSTTOOLS bool "mvebu hosttools" if COMPILE_HOST_TOOLS diff --git a/scripts/Makefile b/scripts/Makefile index ff0a3c2a07..712cf99217 100644 --- a/scripts/Makefile +++ b/scripts/Makefile @@ -20,6 +20,7 @@ hostprogs-$(CONFIG_ARCH_DAVINCI) += mkublheader hostprogs-$(CONFIG_ARCH_ZYNQ) += zynq_mkimage hostprogs-$(CONFIG_ARCH_SOCFPGA) += socfpga_mkimage hostprogs-$(CONFIG_MXS_HOSTTOOLS)+= mxsimage mxsboot +hostprogs-$(CONFIG_ARCH_LAYERSCAPE) += pblimage HOSTCFLAGS += -I$(srctree)/scripts/include/ HOSTLDLIBS_mxsimage = `pkg-config --libs openssl` HOSTCFLAGS_omap3-usb-loader.o = `pkg-config --cflags libusb-1.0` diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib index def9248841..8c07a54d05 100644 --- a/scripts/Makefile.lib +++ b/scripts/Makefile.lib @@ -433,14 +433,24 @@ cmd_disasm = $(OBJDUMP) -d $< > $@ quiet_cmd_ln = LN $@ cmd_ln = ln -sf $< $@ +quiet_cmd_check_size = CHKSIZE $2 + cmd_check_size = set -e; \ + size=`printf "%d" $2`; \ + max_size=`printf "%d" $3`; \ + if [ $$size -gt $$max_size ] ; \ + then \ + echo "$@ size $$size > maximum size $$max_size" >&2; \ + exit 1 ; \ + fi; + # Check size of a file -quiet_cmd_check_file_size = CHKSIZE $2 +quiet_cmd_check_file_size = CHKFILESIZE $2 cmd_check_file_size = set -e; \ size=`stat -c%s $2`; \ max_size=`printf "%d" $3`; \ if [ $$size -gt $$max_size ] ; \ then \ - echo "$@ size $$size > of the maximum size $$max_size" >&2; \ + echo "$@ size $$size > maximum size $$max_size" >&2; \ exit 1 ; \ fi; diff --git a/scripts/check_size b/scripts/check_size new file mode 100755 index 0000000000..54f02a63c5 --- /dev/null +++ b/scripts/check_size @@ -0,0 +1,20 @@ +#!/bin/bash + +symbol="$1" +file="$2" +max="$3" + +# extract symbol offset from file, remove leading zeros +ofs=$(nm -t d $file | grep "$symbol" | cut -d ' ' -f1 | sed "s/^[0]*//") + +if [ -z "${ofs}" ]; then + echo "symbol $symbol not found in $file" + exit 1 +fi + +if [[ $ofs -gt $max ]]; then + echo "symbol $symbol (offset $ofs) in $file exceeds maximum offset $max" + exit 1 +fi + +exit 0 diff --git a/scripts/extract_symbol_offset b/scripts/extract_symbol_offset new file mode 100755 index 0000000000..1a1260f526 --- /dev/null +++ b/scripts/extract_symbol_offset @@ -0,0 +1,14 @@ +#!/bin/bash + +symbol="$1" +file="$2" + +# extract symbol offset from file, remove leading zeros +ofs=$(nm -t d $file | grep "$symbol" | cut -d ' ' -f1 | sed "s/^[0]*//") + +if [ -z "${ofs}" ]; then + echo "symbol $symbol not found in $file" + exit 1 +fi + +echo $ofs diff --git a/scripts/pblimage.c b/scripts/pblimage.c new file mode 100644 index 0000000000..6e83c523e5 --- /dev/null +++ b/scripts/pblimage.c @@ -0,0 +1,432 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2012-2014 Freescale Semiconductor, Inc. + */ +#include <stdio.h> +#include <stdlib.h> +#include <errno.h> +#include <sys/types.h> +#include <sys/stat.h> +#include <unistd.h> +#include <fcntl.h> +#include <string.h> +#include <stdint.h> +#include <getopt.h> +#include <endian.h> + +#define roundup(x, y) ((((x) + ((y) - 1)) / (y)) * (y)) +#define PBL_ACS_CONT_CMD 0x81000000 +#define PBL_ADDR_24BIT_MASK 0x00ffffff + +#define RCW_BYTES 64 +#define RCW_PREAMBLE 0xaa55aa55 +#define RCW_HEADER 0x010e0100 + +/* + * The maximum PBL size we support. The PBL portion in the input image shouldn't + * get bigger than this + */ +#define MAX_PBL_SIZE (64 * 1024) + +/* + * The offset of the 2nd stage image in the output file. This must match with the + * offset barebox expects the 2nd stage image. + */ +#define BAREBOX_START (128 * 1024) + +/* + * Initialize to an invalid value. + */ +static uint32_t next_pbl_cmd = 0x82000000; +/* + * need to store all bytes in memory for calculating crc32, then write the + * bytes to image file for PBL boot. + */ +static unsigned char mem_buf[1000000]; +static unsigned char *pmem_buf = mem_buf; +static int pbl_size; +static int pbl_end; +static int image_size; +static int out_fd; +static int in_fd; + +static uint32_t pbl_cmd_initaddr; +static uint32_t pbi_crc_cmd1; +static uint32_t pbi_crc_cmd2; +static uint32_t pbl_end_cmd[4]; + +enum arch { + ARCH_ARM, + ARCH_POWERPC, +}; + +enum arch architecture; +static char *rcwfile; +static char *pbifile; +static char *outfile; +static unsigned long loadaddr = 0x10000000; +static char *infile; + +static uint32_t crc_table[256]; +static int crc_table_valid; + +static void make_crc_table(void) +{ + uint32_t mask; + int i, j; + uint32_t poly; /* polynomial exclusive-or pattern */ + + if (crc_table_valid) + return; + + /* + * the polynomial used by PBL is 1 + x1 + x2 + x4 + x5 + x7 + x8 + x10 + * + x11 + x12 + x16 + x22 + x23 + x26 + x32. + */ + poly = 0x04c11db7; + + for (i = 0; i < 256; i++) { + mask = i << 24; + for (j = 0; j < 8; j++) { + if (mask & 0x80000000) + mask = (mask << 1) ^ poly; + else + mask <<= 1; + } + crc_table[i] = mask; + } + + crc_table_valid = 1; +} + +uint32_t pbl_crc32(uint32_t in_crc, const char *buf, uint32_t len) +{ + uint32_t crc32_val; + int i; + + make_crc_table(); + + crc32_val = ~in_crc; + + for (i = 0; i < len; i++) + crc32_val = (crc32_val << 8) ^ + crc_table[(crc32_val >> 24) ^ (*buf++ & 0xff)]; + + return crc32_val; +} + +/* + * The PBL can load up to 64 bytes at a time, so we split the image into 64 byte + * chunks. PBL needs a command for each piece, of the form "81xxxxxx", where + * "xxxxxx" is the offset. Calculate the start offset by subtracting the size of + * the image from the top of the allowable 24-bit range. + */ +static void generate_pbl_cmd(void) +{ + uint32_t val = next_pbl_cmd; + next_pbl_cmd += 0x40; + int i; + + for (i = 3; i >= 0; i--) { + *pmem_buf++ = (val >> (i * 8)) & 0xff; + pbl_size++; + } +} + +static void pbl_fget(size_t size, int fd) +{ + int r; + + r = read(fd, pmem_buf, size); + if (r < 0) { + perror("read"); + exit(EXIT_FAILURE); + } + + pmem_buf += r; + + if (r < size) { + memset(pmem_buf, 0xff, size - r); + pmem_buf += size - r; + } + + pbl_size += size; +} + +static void check_get_hexval(const char *filename, int lineno, char *token) +{ + uint32_t hexval; + int i; + + if (!sscanf(token, "%x", &hexval)) { + fprintf(stderr, "Error:%s[%d] - Invalid hex data(%s)\n", + filename, lineno, token); + exit(EXIT_FAILURE); + } + + for (i = 3; i >= 0; i--) { + *pmem_buf++ = (hexval >> (i * 8)) & 0xff; + pbl_size++; + } +} + +static void pbl_parser(char *name) +{ + FILE *f = NULL; + char *line = NULL; + char *token, *saveptr1, *saveptr2; + size_t len = 0; + int lineno = 0; + + f = fopen(name, "r"); + if (!f) { + fprintf(stderr, "Error: Cannot open %s: %s\n", name, + strerror(errno)); + exit(EXIT_FAILURE); + } + + while ((getline(&line, &len, f)) > 0) { + lineno++; + token = strtok_r(line, "\r\n", &saveptr1); + /* drop all lines with zero tokens (= empty lines) */ + if (!token) + continue; + for (line = token;; line = NULL) { + token = strtok_r(line, " \t", &saveptr2); + if (!token) + break; + /* Drop all text starting with '#' as comments */ + if (token[0] == '#') + break; + check_get_hexval(name, lineno, token); + } + } + if (line) + free(line); + fclose(f); +} + +/* write end command and crc command to memory. */ +static void add_end_cmd(void) +{ + uint32_t crc32_pbl; + int i; + unsigned char *p = (unsigned char *)&pbl_end_cmd; + + for (i = 0; i < 4; i++) + pbl_end_cmd[i] = htobe32(pbl_end_cmd[i]); + + for (i = 0; i < 16; i++) { + *pmem_buf++ = *p++; + pbl_size++; + } + + /* Add PBI CRC command. */ + *pmem_buf++ = 0x08; + *pmem_buf++ = pbi_crc_cmd1; + *pmem_buf++ = pbi_crc_cmd2; + *pmem_buf++ = 0x40; + pbl_size += 4; + + /* calculated CRC32 and write it to memory. */ + crc32_pbl = pbl_crc32(0, (const char *)mem_buf, pbl_size); + *pmem_buf++ = (crc32_pbl >> 24) & 0xff; + *pmem_buf++ = (crc32_pbl >> 16) & 0xff; + *pmem_buf++ = (crc32_pbl >> 8) & 0xff; + *pmem_buf++ = (crc32_pbl) & 0xff; + pbl_size += 4; +} + +static void pbl_load_image(void) +{ + int size; + + /* parse the rcw.cfg file. */ + pbl_parser(rcwfile); + + /* parse the pbi.cfg file. */ + if (pbifile) + pbl_parser(pbifile); + + next_pbl_cmd = pbl_cmd_initaddr - image_size; + while (next_pbl_cmd < pbl_cmd_initaddr) { + generate_pbl_cmd(); + pbl_fget(64, in_fd); + } + + add_end_cmd(); + + size = pbl_size; + + if (write(out_fd, (const void *)&mem_buf, size) != size) { + fprintf(stderr, "Write error on %s: %s\n", + outfile, strerror(errno)); + exit(EXIT_FAILURE); + } +} + +static int pblimage_check_params(void) +{ + struct stat st; + + in_fd = open(infile, O_RDONLY); + if (in_fd < 0) { + fprintf(stderr, "Error: Cannot open %s: %s\n", infile, + strerror(errno)); + exit(EXIT_FAILURE); + } + + if (fstat(in_fd, &st) == -1) { + fprintf(stderr, "Error: Could not determine u-boot image size. %s\n", + strerror(errno)); + exit(EXIT_FAILURE); + } + + /* For the variable size, pad it to 64 byte boundary */ + image_size = roundup(pbl_end, 64); + + if (image_size > MAX_PBL_SIZE) { + fprintf(stderr, "Error: pbl size %d in %s exceeds maximum size %d\n", + pbl_end, infile, MAX_PBL_SIZE); + exit(EXIT_FAILURE); + } + + if (architecture == ARCH_ARM) { + pbi_crc_cmd1 = 0x61; + pbi_crc_cmd2 = 0; + pbl_cmd_initaddr = loadaddr & PBL_ADDR_24BIT_MASK; + pbl_cmd_initaddr |= PBL_ACS_CONT_CMD; + pbl_cmd_initaddr += image_size; + pbl_end_cmd[0] = 0x09610000; + pbl_end_cmd[1] = 0x00000000; + pbl_end_cmd[2] = 0x096100c0; + pbl_end_cmd[3] = 0x00000000; + } else { + pbi_crc_cmd1 = 0x13; + pbi_crc_cmd2 = 0x80; + pbl_cmd_initaddr = 0x82000000; + pbl_end_cmd[0] = 0x091380c0; + pbl_end_cmd[1] = 0x00000000; + pbl_end_cmd[2] = 0x091380c0; + pbl_end_cmd[3] = 0x00000000; + } + + next_pbl_cmd = pbl_cmd_initaddr; + return 0; +}; + +static int copy_fd(int in, int out) +{ + int bs = 4096; + void *buf = malloc(bs); + + if (!buf) + exit(EXIT_FAILURE); + + while (1) { + int now, wr; + + now = read(in, buf, bs); + if (now < 0) { + fprintf(stderr, "read failed with %s\n", strerror(errno)); + exit(EXIT_FAILURE); + } + + if (!now) + break; + + wr = write(out, buf, now); + if (wr < 0) { + fprintf(stderr, "write failed with %s\n", strerror(errno)); + exit(EXIT_FAILURE); + } + + if (wr != now) { + fprintf(stderr, "short write\n"); + exit(EXIT_FAILURE); + } + } + + free(buf); + + return 0; +} + +int main(int argc, char *argv[]) +{ + int opt, ret; + off_t pos; + + while ((opt = getopt(argc, argv, "i:r:p:o:m:")) != -1) { + switch (opt) { + case 'i': + infile = optarg; + break; + case 'r': + rcwfile = optarg; + break; + case 'p': + pbifile = optarg; + break; + case 'o': + outfile = optarg; + break; + case 'm': + pbl_end = atoi(optarg); + break; + default: + exit(EXIT_FAILURE); + } + } + + if (!infile) { + fprintf(stderr, "No infile given\n"); + exit(EXIT_FAILURE); + } + + if (!outfile) { + fprintf(stderr, "No outfile given\n"); + exit(EXIT_FAILURE); + } + + if (!rcwfile) { + fprintf(stderr, "No rcwfile given\n"); + exit(EXIT_FAILURE); + } + + pblimage_check_params(); + + out_fd = open(outfile, O_WRONLY | O_CREAT | O_TRUNC, 0644); + if (out_fd < 0) { + fprintf(stderr, "Cannot open %s for writing: %s\n", + outfile, strerror(errno)); + exit(EXIT_FAILURE); + } + + pbl_load_image(); + + ret = ftruncate(out_fd, BAREBOX_START); + if (ret) { + fprintf(stderr, "Cannot truncate\n"); + exit(EXIT_FAILURE); + } + + pos = lseek(out_fd, BAREBOX_START, SEEK_SET); + if (pos == (off_t)-1) { + fprintf(stderr, "Cannot lseek 1\n"); + exit(EXIT_FAILURE); + } + + pos = lseek(in_fd, 0, SEEK_SET); + if (pos == (off_t)-1) { + fprintf(stderr, "Cannot lseek 2\n"); + exit(EXIT_FAILURE); + } + + copy_fd(in_fd, out_fd); + + close(in_fd); + close(out_fd); + + exit(EXIT_SUCCESS); +} |