diff options
50 files changed, 316 insertions, 84 deletions
diff --git a/dts/Bindings/arm/cpus.yaml b/dts/Bindings/arm/cpus.yaml index 14cd727d3c..f02fd10de6 100644 --- a/dts/Bindings/arm/cpus.yaml +++ b/dts/Bindings/arm/cpus.yaml @@ -232,7 +232,6 @@ properties: by this cpu (see ./idle-states.yaml). capacity-dmips-mhz: - $ref: '/schemas/types.yaml#/definitions/uint32' description: u32 value representing CPU capacity (see ./cpu-capacity.txt) in DMIPS/MHz, relative to highest capacity-dmips-mhz diff --git a/dts/Bindings/display/bridge/sii902x.txt b/dts/Bindings/display/bridge/sii902x.txt index 02c21b5847..3bc760cc31 100644 --- a/dts/Bindings/display/bridge/sii902x.txt +++ b/dts/Bindings/display/bridge/sii902x.txt @@ -40,7 +40,7 @@ Optional properties: documents on how to describe the way the sii902x device is connected to the rest of the audio system: Documentation/devicetree/bindings/sound/simple-card.yaml - Documentation/devicetree/bindings/sound/audio-graph-card.txt + Documentation/devicetree/bindings/sound/audio-graph-card.yaml Note: In case of the audio-graph-card binding the used port index should be 3. diff --git a/dts/Bindings/display/mediatek/mediatek,disp.txt b/dts/Bindings/display/mediatek/mediatek,disp.txt index 33977e15be..ed76332ec0 100644 --- a/dts/Bindings/display/mediatek/mediatek,disp.txt +++ b/dts/Bindings/display/mediatek/mediatek,disp.txt @@ -23,7 +23,7 @@ connected to. For a description of the display interface sink function blocks, see Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt and -Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt. +Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml. Required properties (all function blocks): - compatible: "mediatek,<chip>-disp-<function>", one of @@ -61,7 +61,7 @@ Required properties (DMA function blocks): "mediatek,<chip>-disp-wdma" the supported chips are mt2701, mt8167 and mt8173. - larb: Should contain a phandle pointing to the local arbiter device as defined - in Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt + in Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml - iommus: Should point to the respective IOMMU block with master port as argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt for details. diff --git a/dts/Bindings/extcon/wlf,arizona.yaml b/dts/Bindings/extcon/wlf,arizona.yaml index 5fe784f487..efdf59abb2 100644 --- a/dts/Bindings/extcon/wlf,arizona.yaml +++ b/dts/Bindings/extcon/wlf,arizona.yaml @@ -85,7 +85,6 @@ properties: wlf,micd-timeout-ms: description: Timeout for microphone detection, specified in milliseconds. - $ref: "/schemas/types.yaml#/definitions/uint32" wlf,micd-force-micbias: description: diff --git a/dts/Bindings/hwmon/adi,ltc2947.yaml b/dts/Bindings/hwmon/adi,ltc2947.yaml index eef614962b..bf04151b63 100644 --- a/dts/Bindings/hwmon/adi,ltc2947.yaml +++ b/dts/Bindings/hwmon/adi,ltc2947.yaml @@ -49,7 +49,6 @@ properties: description: This property controls the Accumulation Dead band which allows to set the level of current below which no accumulation takes place. - $ref: /schemas/types.yaml#/definitions/uint32 maximum: 255 default: 0 diff --git a/dts/Bindings/hwmon/baikal,bt1-pvt.yaml b/dts/Bindings/hwmon/baikal,bt1-pvt.yaml index 00a6511354..5d3ce641fc 100644 --- a/dts/Bindings/hwmon/baikal,bt1-pvt.yaml +++ b/dts/Bindings/hwmon/baikal,bt1-pvt.yaml @@ -73,11 +73,9 @@ properties: description: | Temperature sensor trimming factor. It can be used to manually adjust the temperature measurements within 7.130 degrees Celsius. - maxItems: 1 - items: - default: 0 - minimum: 0 - maximum: 7130 + default: 0 + minimum: 0 + maximum: 7130 additionalProperties: false diff --git a/dts/Bindings/hwmon/ti,tmp513.yaml b/dts/Bindings/hwmon/ti,tmp513.yaml index 8020d739a0..1502b22c77 100644 --- a/dts/Bindings/hwmon/ti,tmp513.yaml +++ b/dts/Bindings/hwmon/ti,tmp513.yaml @@ -52,7 +52,6 @@ properties: ti,bus-range-microvolt: description: | This is the operating range of the bus voltage in microvolt - $ref: /schemas/types.yaml#/definitions/uint32 enum: [16000000, 32000000] default: 32000000 diff --git a/dts/Bindings/i2c/i2c-gpio.yaml b/dts/Bindings/i2c/i2c-gpio.yaml index cc3aa2a5e7..ff99344788 100644 --- a/dts/Bindings/i2c/i2c-gpio.yaml +++ b/dts/Bindings/i2c/i2c-gpio.yaml @@ -39,11 +39,9 @@ properties: i2c-gpio,delay-us: description: delay between GPIO operations (may depend on each platform) - $ref: /schemas/types.yaml#/definitions/uint32 i2c-gpio,timeout-ms: description: timeout to get data - $ref: /schemas/types.yaml#/definitions/uint32 # Deprecated properties, do not use in new device tree sources: gpios: diff --git a/dts/Bindings/i2c/snps,designware-i2c.yaml b/dts/Bindings/i2c/snps,designware-i2c.yaml index c22b66b621..d9293c57f5 100644 --- a/dts/Bindings/i2c/snps,designware-i2c.yaml +++ b/dts/Bindings/i2c/snps,designware-i2c.yaml @@ -66,21 +66,18 @@ properties: default: 400000 i2c-sda-hold-time-ns: - maxItems: 1 description: | The property should contain the SDA hold time in nanoseconds. This option is only supported in hardware blocks version 1.11a or newer or on Microsemi SoCs. i2c-scl-falling-time-ns: - maxItems: 1 description: | The property should contain the SCL falling time in nanoseconds. This value is used to compute the tLOW period. default: 300 i2c-sda-falling-time-ns: - maxItems: 1 description: | The property should contain the SDA falling time in nanoseconds. This value is used to compute the tHIGH period. diff --git a/dts/Bindings/iio/adc/adi,ad7192.yaml b/dts/Bindings/iio/adc/adi,ad7192.yaml index e0cc3b2e89..22b7ed3723 100644 --- a/dts/Bindings/iio/adc/adi,ad7192.yaml +++ b/dts/Bindings/iio/adc/adi,ad7192.yaml @@ -80,7 +80,7 @@ properties: type: boolean bipolar: - description: see Documentation/devicetree/bindings/iio/adc/adc.txt + description: see Documentation/devicetree/bindings/iio/adc/adc.yaml type: boolean required: diff --git a/dts/Bindings/iio/adc/maxim,max9611.yaml b/dts/Bindings/iio/adc/maxim,max9611.yaml index 9475a9e6e9..95774a5562 100644 --- a/dts/Bindings/iio/adc/maxim,max9611.yaml +++ b/dts/Bindings/iio/adc/maxim,max9611.yaml @@ -23,7 +23,6 @@ properties: maxItems: 1 shunt-resistor-micro-ohms: - $ref: /schemas/types.yaml#/definitions/uint32 description: | Value in micro Ohms of the shunt resistor connected between the RS+ and RS- inputs, across which the current is measured. Value needed to compute diff --git a/dts/Bindings/iio/adc/st,stm32-adc.yaml b/dts/Bindings/iio/adc/st,stm32-adc.yaml index 28417b31b5..517e32976c 100644 --- a/dts/Bindings/iio/adc/st,stm32-adc.yaml +++ b/dts/Bindings/iio/adc/st,stm32-adc.yaml @@ -246,7 +246,6 @@ patternProperties: Resolution (bits) to use for conversions: - can be 6, 8, 10 or 12 on stm32f4 - can be 8, 10, 12, 14 or 16 on stm32h7 and stm32mp1 - $ref: /schemas/types.yaml#/definitions/uint32 st,adc-channels: description: | diff --git a/dts/Bindings/iio/adc/ti,palmas-gpadc.yaml b/dts/Bindings/iio/adc/ti,palmas-gpadc.yaml index 692dacd0fe..7b895784e0 100644 --- a/dts/Bindings/iio/adc/ti,palmas-gpadc.yaml +++ b/dts/Bindings/iio/adc/ti,palmas-gpadc.yaml @@ -42,7 +42,6 @@ properties: const: 1 ti,channel0-current-microamp: - $ref: /schemas/types.yaml#/definitions/uint32 description: Channel 0 current in uA. enum: - 0 @@ -51,7 +50,6 @@ properties: - 20 ti,channel3-current-microamp: - $ref: /schemas/types.yaml#/definitions/uint32 description: Channel 3 current in uA. enum: - 0 diff --git a/dts/Bindings/iio/dac/adi,ad5758.yaml b/dts/Bindings/iio/dac/adi,ad5758.yaml index 626ccb6fe2..fd4edca34a 100644 --- a/dts/Bindings/iio/dac/adi,ad5758.yaml +++ b/dts/Bindings/iio/dac/adi,ad5758.yaml @@ -46,31 +46,42 @@ properties: two properties must be present: adi,range-microvolt: - $ref: /schemas/types.yaml#/definitions/int32-array description: | Voltage output range specified as <minimum, maximum> - enum: - - [[0, 5000000]] - - [[0, 10000000]] - - [[-5000000, 5000000]] - - [[-10000000, 10000000]] + oneOf: + - items: + - const: 0 + - enum: [5000000, 10000000] + - items: + - const: -5000000 + - const: 5000000 + - items: + - const: -10000000 + - const: 10000000 adi,range-microamp: - $ref: /schemas/types.yaml#/definitions/int32-array description: | Current output range specified as <minimum, maximum> - enum: - - [[0, 20000]] - - [[0, 24000]] - - [[4, 24000]] - - [[-20000, 20000]] - - [[-24000, 24000]] - - [[-1000, 22000]] + oneOf: + - items: + - const: 0 + - enum: [20000, 24000] + - items: + - const: 4 + - const: 24000 + - items: + - const: -20000 + - const: 20000 + - items: + - const: -24000 + - const: 24000 + - items: + - const: -1000 + - const: 22000 reset-gpios: true adi,dc-dc-ilim-microamp: - $ref: /schemas/types.yaml#/definitions/uint32 enum: [150000, 200000, 250000, 300000, 350000, 400000] description: | The dc-to-dc converter current limit. diff --git a/dts/Bindings/iio/health/maxim,max30100.yaml b/dts/Bindings/iio/health/maxim,max30100.yaml index 64b8626370..967778fb0c 100644 --- a/dts/Bindings/iio/health/maxim,max30100.yaml +++ b/dts/Bindings/iio/health/maxim,max30100.yaml @@ -21,7 +21,6 @@ properties: description: Connected to ADC_RDY pin. maxim,led-current-microamp: - $ref: /schemas/types.yaml#/definitions/uint32-array minItems: 2 maxItems: 2 description: | diff --git a/dts/Bindings/input/touchscreen/touchscreen.yaml b/dts/Bindings/input/touchscreen/touchscreen.yaml index a771a15f05..046ace461c 100644 --- a/dts/Bindings/input/touchscreen/touchscreen.yaml +++ b/dts/Bindings/input/touchscreen/touchscreen.yaml @@ -70,11 +70,9 @@ properties: touchscreen-x-mm: description: horizontal length in mm of the touchscreen - $ref: /schemas/types.yaml#/definitions/uint32 touchscreen-y-mm: description: vertical length in mm of the touchscreen - $ref: /schemas/types.yaml#/definitions/uint32 dependencies: touchscreen-size-x: [ touchscreen-size-y ] diff --git a/dts/Bindings/leds/richtek,rt8515.yaml b/dts/Bindings/leds/richtek,rt8515.yaml new file mode 100644 index 0000000000..68c328eec0 --- /dev/null +++ b/dts/Bindings/leds/richtek,rt8515.yaml @@ -0,0 +1,111 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/richtek,rt8515.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Richtek RT8515 1.5A dual channel LED driver + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +description: | + The Richtek RT8515 is a dual channel (two mode) LED driver that + supports driving a white LED in flash or torch mode. The maximum + current for each mode is defined in hardware using two resistors + RFS and RTS. + +properties: + compatible: + const: richtek,rt8515 + + enf-gpios: + maxItems: 1 + description: A connection to the 'ENF' (enable flash) pin. + + ent-gpios: + maxItems: 1 + description: A connection to the 'ENT' (enable torch) pin. + + richtek,rfs-ohms: + minimum: 7680 + maximum: 367000 + description: The resistance value of the RFS resistor. This + resistors limits the maximum flash current. This must be set + for the property flash-max-microamp to work, the RFS resistor + defines the range of the dimmer setting (brightness) of the + flash LED. + + richtek,rts-ohms: + minimum: 7680 + maximum: 367000 + description: The resistance value of the RTS resistor. This + resistors limits the maximum torch current. This must be set + for the property torch-max-microamp to work, the RTS resistor + defines the range of the dimmer setting (brightness) of the + torch LED. + + led: + type: object + $ref: common.yaml# + properties: + function: true + color: true + flash-max-timeout-us: true + + flash-max-microamp: + maximum: 700000 + description: The maximum current for flash mode + is hardwired to the component using the RFS resistor to + ground. The maximum hardware current setting is calculated + according to the formula Imax = 5500 / RFS. The lowest + allowed resistance value is 7.86 kOhm giving an absolute + maximum current of 700mA. By setting this attribute in + the device tree, you can further restrict the maximum + current below the hardware limit. This requires the RFS + to be defined as it defines the maximum range. + + led-max-microamp: + maximum: 700000 + description: The maximum current for torch mode + is hardwired to the component using the RTS resistor to + ground. The maximum hardware current setting is calculated + according to the formula Imax = 5500 / RTS. The lowest + allowed resistance value is 7.86 kOhm giving an absolute + maximum current of 700mA. By setting this attribute in + the device tree, you can further restrict the maximum + current below the hardware limit. This requires the RTS + to be defined as it defines the maximum range. + + additionalProperties: false + +required: + - compatible + - ent-gpios + - enf-gpios + - led + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/leds/common.h> + + led-controller { + compatible = "richtek,rt8515"; + enf-gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>; + ent-gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>; + richtek,rfs-ohms = <16000>; + richtek,rts-ohms = <100000>; + + led { + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_WHITE>; + flash-max-timeout-us = <250000>; + flash-max-microamp = <150000>; + led-max-microamp = <25000>; + }; + }; + +... diff --git a/dts/Bindings/media/mediatek-jpeg-decoder.txt b/dts/Bindings/media/mediatek-jpeg-decoder.txt index 044b11913c..cf60c5acc0 100644 --- a/dts/Bindings/media/mediatek-jpeg-decoder.txt +++ b/dts/Bindings/media/mediatek-jpeg-decoder.txt @@ -16,7 +16,7 @@ Required properties: - power-domains: a phandle to the power domain, see Documentation/devicetree/bindings/power/power_domain.txt for details. - mediatek,larb: must contain the local arbiters in the current Socs, see - Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt + Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml for details. - iommus: should point to the respective IOMMU block with master port as argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt diff --git a/dts/Bindings/media/mediatek-jpeg-encoder.txt b/dts/Bindings/media/mediatek-jpeg-encoder.txt index 736be7cad3..acfb50375b 100644 --- a/dts/Bindings/media/mediatek-jpeg-encoder.txt +++ b/dts/Bindings/media/mediatek-jpeg-encoder.txt @@ -14,7 +14,7 @@ Required properties: - power-domains: a phandle to the power domain, see Documentation/devicetree/bindings/power/power_domain.txt for details. - mediatek,larb: must contain the local arbiters in the current SoCs, see - Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt + Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml for details. - iommus: should point to the respective IOMMU block with master port as argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt diff --git a/dts/Bindings/media/mediatek-mdp.txt b/dts/Bindings/media/mediatek-mdp.txt index 0d03e3ae2b..f4798d04e9 100644 --- a/dts/Bindings/media/mediatek-mdp.txt +++ b/dts/Bindings/media/mediatek-mdp.txt @@ -28,7 +28,7 @@ Required properties (DMA function blocks, child node): argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt for details. - mediatek,larb: must contain the local arbiters in the current Socs, see - Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt + Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml for details. Example: diff --git a/dts/Bindings/mmc/mmc-controller.yaml b/dts/Bindings/mmc/mmc-controller.yaml index 186f04ba93..e674bba52e 100644 --- a/dts/Bindings/mmc/mmc-controller.yaml +++ b/dts/Bindings/mmc/mmc-controller.yaml @@ -259,7 +259,6 @@ properties: waiting for I/O signalling and card power supply to be stable, regardless of whether pwrseq-simple is used. Default to 10ms if no available. - $ref: /schemas/types.yaml#/definitions/uint32 default: 10 supports-cqe: diff --git a/dts/Bindings/mmc/mmc-pwrseq-simple.yaml b/dts/Bindings/mmc/mmc-pwrseq-simple.yaml index 6cd57863c1..226fb19191 100644 --- a/dts/Bindings/mmc/mmc-pwrseq-simple.yaml +++ b/dts/Bindings/mmc/mmc-pwrseq-simple.yaml @@ -41,13 +41,11 @@ properties: description: Delay in ms after powering the card and de-asserting the reset-gpios (if any). - $ref: /schemas/types.yaml#/definitions/uint32 power-off-delay-us: description: Delay in us after asserting the reset-gpios (if any) during power off of the card. - $ref: /schemas/types.yaml#/definitions/uint32 required: - compatible diff --git a/dts/Bindings/net/ethernet-controller.yaml b/dts/Bindings/net/ethernet-controller.yaml index 0965f6515f..dac4aadb6e 100644 --- a/dts/Bindings/net/ethernet-controller.yaml +++ b/dts/Bindings/net/ethernet-controller.yaml @@ -122,7 +122,6 @@ properties: such as flow control thresholds. rx-internal-delay-ps: - $ref: /schemas/types.yaml#/definitions/uint32 description: | RGMII Receive Clock Delay defined in pico seconds. This is used for controllers that have configurable RX internal delays. @@ -140,7 +139,6 @@ properties: is used for components that can have configurable fifo sizes. tx-internal-delay-ps: - $ref: /schemas/types.yaml#/definitions/uint32 description: | RGMII Transmit Clock Delay defined in pico seconds. This is used for controllers that have configurable TX internal delays. diff --git a/dts/Bindings/net/snps,dwmac.yaml b/dts/Bindings/net/snps,dwmac.yaml index dfbf5fe454..0642b0f594 100644 --- a/dts/Bindings/net/snps,dwmac.yaml +++ b/dts/Bindings/net/snps,dwmac.yaml @@ -212,7 +212,6 @@ properties: Triplet of delays. The 1st cell is reset pre-delay in micro seconds. The 2nd cell is reset pulse in micro seconds. The 3rd cell is reset post-delay in micro seconds. - $ref: /schemas/types.yaml#/definitions/uint32-array minItems: 3 maxItems: 3 diff --git a/dts/Bindings/power/supply/battery.yaml b/dts/Bindings/power/supply/battery.yaml index 0c7e2e4479..c3b4b75435 100644 --- a/dts/Bindings/power/supply/battery.yaml +++ b/dts/Bindings/power/supply/battery.yaml @@ -83,21 +83,18 @@ properties: for each of the battery capacity lookup table. operating-range-celsius: - $ref: /schemas/types.yaml#/definitions/uint32-array description: operating temperature range of a battery items: - description: minimum temperature at which battery can operate - description: maximum temperature at which battery can operate ambient-celsius: - $ref: /schemas/types.yaml#/definitions/uint32-array description: safe range of ambient temperature items: - description: alert when ambient temperature is lower than this value - description: alert when ambient temperature is higher than this value alert-celsius: - $ref: /schemas/types.yaml#/definitions/uint32-array description: safe range of battery temperature items: - description: alert when battery temperature is lower than this value diff --git a/dts/Bindings/power/supply/bq2515x.yaml b/dts/Bindings/power/supply/bq2515x.yaml index 75a56773be..813d6afde6 100644 --- a/dts/Bindings/power/supply/bq2515x.yaml +++ b/dts/Bindings/power/supply/bq2515x.yaml @@ -50,7 +50,6 @@ properties: maxItems: 1 input-current-limit-microamp: - $ref: /schemas/types.yaml#/definitions/uint32 description: Maximum input current in micro Amps. minimum: 50000 maximum: 500000 diff --git a/dts/Bindings/regulator/dlg,da9121.yaml b/dts/Bindings/regulator/dlg,da9121.yaml index 6f2164f7bc..228018c87b 100644 --- a/dts/Bindings/regulator/dlg,da9121.yaml +++ b/dts/Bindings/regulator/dlg,da9121.yaml @@ -62,7 +62,6 @@ properties: description: IRQ line information. dlg,irq-polling-delay-passive-ms: - $ref: "/schemas/types.yaml#/definitions/uint32" minimum: 1000 maximum: 10000 description: | diff --git a/dts/Bindings/regulator/fixed-regulator.yaml b/dts/Bindings/regulator/fixed-regulator.yaml index d3d0dc13dd..8850c01bd4 100644 --- a/dts/Bindings/regulator/fixed-regulator.yaml +++ b/dts/Bindings/regulator/fixed-regulator.yaml @@ -72,11 +72,9 @@ properties: startup-delay-us: description: startup time in microseconds - $ref: /schemas/types.yaml#/definitions/uint32 off-on-delay-us: description: off delay time in microseconds - $ref: /schemas/types.yaml#/definitions/uint32 enable-active-high: description: diff --git a/dts/Bindings/rtc/rtc.yaml b/dts/Bindings/rtc/rtc.yaml index d30dc045aa..0ec3551f12 100644 --- a/dts/Bindings/rtc/rtc.yaml +++ b/dts/Bindings/rtc/rtc.yaml @@ -27,7 +27,6 @@ properties: 1: chargeable quartz-load-femtofarads: - $ref: /schemas/types.yaml#/definitions/uint32 description: The capacitive load of the quartz(x-tal), expressed in femto Farad (fF). The default value shall be listed (if optional), @@ -47,7 +46,6 @@ properties: deprecated: true trickle-resistor-ohms: - $ref: /schemas/types.yaml#/definitions/uint32 description: Selected resistor for trickle charger. Should be given if trickle charger should be enabled. diff --git a/dts/Bindings/serial/pl011.yaml b/dts/Bindings/serial/pl011.yaml index c23c93b400..07fa6d26f2 100644 --- a/dts/Bindings/serial/pl011.yaml +++ b/dts/Bindings/serial/pl011.yaml @@ -88,14 +88,12 @@ properties: description: Rate at which poll occurs when auto-poll is set. default 100ms. - $ref: /schemas/types.yaml#/definitions/uint32 default: 100 poll-timeout-ms: description: Poll timeout when auto-poll is set, default 3000ms. - $ref: /schemas/types.yaml#/definitions/uint32 default: 3000 required: diff --git a/dts/Bindings/sound/mt8192-mt6359-rt1015-rt5682.yaml b/dts/Bindings/sound/mt8192-mt6359-rt1015-rt5682.yaml index bf8c8ba250..54650823b2 100644 --- a/dts/Bindings/sound/mt8192-mt6359-rt1015-rt5682.yaml +++ b/dts/Bindings/sound/mt8192-mt6359-rt1015-rt5682.yaml @@ -7,8 +7,8 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Mediatek MT8192 with MT6359, RT1015 and RT5682 ASoC sound card driver maintainers: - - Jiaxin Yu <jiaxin.yu@mediatek.com> - - Shane Chien <shane.chien@mediatek.com> + - Jiaxin Yu <jiaxin.yu@mediatek.com> + - Shane Chien <shane.chien@mediatek.com> description: This binding describes the MT8192 sound card. diff --git a/dts/Bindings/sound/sgtl5000.yaml b/dts/Bindings/sound/sgtl5000.yaml index d116c174b5..70b4a88310 100644 --- a/dts/Bindings/sound/sgtl5000.yaml +++ b/dts/Bindings/sound/sgtl5000.yaml @@ -41,14 +41,12 @@ properties: values of 2k, 4k or 8k. If set to 0 it will be off. If this node is not mentioned or if the value is unknown, then micbias resistor is set to 4k. - $ref: "/schemas/types.yaml#/definitions/uint32" enum: [ 0, 2, 4, 8 ] micbias-voltage-m-volts: description: The bias voltage to be used in mVolts. The voltage can take values from 1.25V to 3V by 250mV steps. If this node is not mentioned or the value is unknown, then the value is set to 1.25V. - $ref: "/schemas/types.yaml#/definitions/uint32" enum: [ 1250, 1500, 1750, 2000, 2250, 2500, 2750, 3000 ] lrclk-strength: diff --git a/dts/Bindings/usb/ti,j721e-usb.yaml b/dts/Bindings/usb/ti,j721e-usb.yaml index 148b3fb4ce..c80a835719 100644 --- a/dts/Bindings/usb/ti,j721e-usb.yaml +++ b/dts/Bindings/usb/ti,j721e-usb.yaml @@ -21,6 +21,8 @@ properties: reg: description: module registers + ranges: true + power-domains: description: PM domain provider node and an args specifier containing @@ -62,6 +64,8 @@ properties: '#size-cells': const: 2 + dma-coherent: true + patternProperties: "^usb@": type: object diff --git a/dts/Bindings/watchdog/watchdog.yaml b/dts/Bindings/watchdog/watchdog.yaml index 4e2c26cd98..e3dfb02f0c 100644 --- a/dts/Bindings/watchdog/watchdog.yaml +++ b/dts/Bindings/watchdog/watchdog.yaml @@ -19,7 +19,6 @@ properties: pattern: "^watchdog(@.*|-[0-9a-f])?$" timeout-sec: - $ref: /schemas/types.yaml#/definitions/uint32 description: Contains the watchdog timeout in seconds. diff --git a/dts/include/dt-bindings/sound/apq8016-lpass.h b/dts/include/dt-bindings/sound/apq8016-lpass.h index 3c3e16c0aa..dc605c4bc2 100644 --- a/dts/include/dt-bindings/sound/apq8016-lpass.h +++ b/dts/include/dt-bindings/sound/apq8016-lpass.h @@ -2,9 +2,8 @@ #ifndef __DT_APQ8016_LPASS_H #define __DT_APQ8016_LPASS_H -#define MI2S_PRIMARY 0 -#define MI2S_SECONDARY 1 -#define MI2S_TERTIARY 2 -#define MI2S_QUATERNARY 3 +#include <dt-bindings/sound/qcom,lpass.h> + +/* NOTE: Use qcom,lpass.h to define any AIF ID's for LPASS */ #endif /* __DT_APQ8016_LPASS_H */ diff --git a/dts/include/dt-bindings/sound/qcom,lpass.h b/dts/include/dt-bindings/sound/qcom,lpass.h new file mode 100644 index 0000000000..7b0b80b386 --- /dev/null +++ b/dts/include/dt-bindings/sound/qcom,lpass.h @@ -0,0 +1,15 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __DT_QCOM_LPASS_H +#define __DT_QCOM_LPASS_H + +#define MI2S_PRIMARY 0 +#define MI2S_SECONDARY 1 +#define MI2S_TERTIARY 2 +#define MI2S_QUATERNARY 3 +#define MI2S_QUINARY 4 + +#define LPASS_DP_RX 5 + +#define LPASS_MCLK0 0 + +#endif /* __DT_QCOM_LPASS_H */ diff --git a/dts/include/dt-bindings/sound/sc7180-lpass.h b/dts/include/dt-bindings/sound/sc7180-lpass.h index 56ecaafd2d..5c1ee8b36b 100644 --- a/dts/include/dt-bindings/sound/sc7180-lpass.h +++ b/dts/include/dt-bindings/sound/sc7180-lpass.h @@ -2,10 +2,8 @@ #ifndef __DT_SC7180_LPASS_H #define __DT_SC7180_LPASS_H -#define MI2S_PRIMARY 0 -#define MI2S_SECONDARY 1 -#define LPASS_DP_RX 2 +#include <dt-bindings/sound/qcom,lpass.h> -#define LPASS_MCLK0 0 +/* NOTE: Use qcom,lpass.h to define any AIF ID's for LPASS */ #endif /* __DT_APQ8016_LPASS_H */ diff --git a/dts/src/arm/imx6q-tbs2910.dts b/dts/src/arm/imx6q-tbs2910.dts index 861e05d531..343364d3e4 100644 --- a/dts/src/arm/imx6q-tbs2910.dts +++ b/dts/src/arm/imx6q-tbs2910.dts @@ -16,6 +16,13 @@ stdout-path = &uart1; }; + aliases { + mmc0 = &usdhc2; + mmc1 = &usdhc3; + mmc2 = &usdhc4; + /delete-property/ mmc3; + }; + memory@10000000 { device_type = "memory"; reg = <0x10000000 0x80000000>; diff --git a/dts/src/arm/imx6qdl-gw52xx.dtsi b/dts/src/arm/imx6qdl-gw52xx.dtsi index 736074f1c3..959d8ac2e3 100644 --- a/dts/src/arm/imx6qdl-gw52xx.dtsi +++ b/dts/src/arm/imx6qdl-gw52xx.dtsi @@ -418,7 +418,7 @@ /* VDD_AUD_1P8: Audio codec */ reg_aud_1p8v: ldo3 { - regulator-name = "vdd1p8"; + regulator-name = "vdd1p8a"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-boot-on; diff --git a/dts/src/arm/imx6qdl-kontron-samx6i.dtsi b/dts/src/arm/imx6qdl-kontron-samx6i.dtsi index d6df598bd1..b167b33bd1 100644 --- a/dts/src/arm/imx6qdl-kontron-samx6i.dtsi +++ b/dts/src/arm/imx6qdl-kontron-samx6i.dtsi @@ -137,7 +137,7 @@ lcd_backlight: lcd-backlight { compatible = "pwm-backlight"; - pwms = <&pwm4 0 5000000>; + pwms = <&pwm4 0 5000000 0>; pwm-names = "LCD_BKLT_PWM"; brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; @@ -167,7 +167,7 @@ i2c-gpio,delay-us = <2>; /* ~100 kHz */ #address-cells = <1>; #size-cells = <0>; - status = "disabld"; + status = "disabled"; }; i2c_cam: i2c-gpio-cam { @@ -179,7 +179,7 @@ i2c-gpio,delay-us = <2>; /* ~100 kHz */ #address-cells = <1>; #size-cells = <0>; - status = "disabld"; + status = "disabled"; }; }; diff --git a/dts/src/arm/imx6qdl-sr-som.dtsi b/dts/src/arm/imx6qdl-sr-som.dtsi index b06577808f..7e4e5fd014 100644 --- a/dts/src/arm/imx6qdl-sr-som.dtsi +++ b/dts/src/arm/imx6qdl-sr-som.dtsi @@ -53,7 +53,6 @@ &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_microsom_enet_ar8035>; - phy-handle = <&phy>; phy-mode = "rgmii-id"; phy-reset-duration = <2>; phy-reset-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; @@ -63,10 +62,19 @@ #address-cells = <1>; #size-cells = <0>; - phy: ethernet-phy@0 { + /* + * The PHY can appear at either address 0 or 4 due to the + * configuration (LED) pin not being pulled sufficiently. + */ + ethernet-phy@0 { reg = <0>; qca,clk-out-frequency = <125000000>; }; + + ethernet-phy@4 { + reg = <4>; + qca,clk-out-frequency = <125000000>; + }; }; }; diff --git a/dts/src/arm/imx7d-flex-concentrator.dts b/dts/src/arm/imx7d-flex-concentrator.dts index 84b095279e..bd6b5285aa 100644 --- a/dts/src/arm/imx7d-flex-concentrator.dts +++ b/dts/src/arm/imx7d-flex-concentrator.dts @@ -115,6 +115,7 @@ compatible = "nxp,pcf2127"; reg = <0>; spi-max-frequency = <2000000>; + reset-source; }; }; diff --git a/dts/src/arm/ste-db8500.dtsi b/dts/src/arm/ste-db8500.dtsi index d309fad322..344d29853b 100644 --- a/dts/src/arm/ste-db8500.dtsi +++ b/dts/src/arm/ste-db8500.dtsi @@ -12,4 +12,42 @@ 200000 0>; }; }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + /* Modem trace memory */ + ram@06000000 { + reg = <0x06000000 0x00f00000>; + no-map; + }; + + /* Modem shared memory */ + ram@06f00000 { + reg = <0x06f00000 0x00100000>; + no-map; + }; + + /* Modem private memory */ + ram@07000000 { + reg = <0x07000000 0x01000000>; + no-map; + }; + + /* + * Initial Secure Software ISSW memory + * + * This is probably only used if the kernel tries + * to actually call into trustzone to run secure + * applications, which the mainline kernel probably + * will not do on this old chipset. But you can never + * be too careful, so reserve this memory anyway. + */ + ram@17f00000 { + reg = <0x17f00000 0x00100000>; + no-map; + }; + }; }; diff --git a/dts/src/arm/ste-db8520.dtsi b/dts/src/arm/ste-db8520.dtsi index 48bd8728ae..287804e9e1 100644 --- a/dts/src/arm/ste-db8520.dtsi +++ b/dts/src/arm/ste-db8520.dtsi @@ -12,4 +12,42 @@ 200000 0>; }; }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + /* Modem trace memory */ + ram@06000000 { + reg = <0x06000000 0x00f00000>; + no-map; + }; + + /* Modem shared memory */ + ram@06f00000 { + reg = <0x06f00000 0x00100000>; + no-map; + }; + + /* Modem private memory */ + ram@07000000 { + reg = <0x07000000 0x01000000>; + no-map; + }; + + /* + * Initial Secure Software ISSW memory + * + * This is probably only used if the kernel tries + * to actually call into trustzone to run secure + * applications, which the mainline kernel probably + * will not do on this old chipset. But you can never + * be too careful, so reserve this memory anyway. + */ + ram@17f00000 { + reg = <0x17f00000 0x00100000>; + no-map; + }; + }; }; diff --git a/dts/src/arm/ste-db9500.dtsi b/dts/src/arm/ste-db9500.dtsi new file mode 100644 index 0000000000..0afff70319 --- /dev/null +++ b/dts/src/arm/ste-db9500.dtsi @@ -0,0 +1,35 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +#include "ste-dbx5x0.dtsi" + +/ { + cpus { + cpu@300 { + /* cpufreq controls */ + operating-points = <1152000 0 + 800000 0 + 400000 0 + 200000 0>; + }; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + /* + * Initial Secure Software ISSW memory + * + * This is probably only used if the kernel tries + * to actually call into trustzone to run secure + * applications, which the mainline kernel probably + * will not do on this old chipset. But you can never + * be too careful, so reserve this memory anyway. + */ + ram@17f00000 { + reg = <0x17f00000 0x00100000>; + no-map; + }; + }; +}; diff --git a/dts/src/arm/ste-snowball.dts b/dts/src/arm/ste-snowball.dts index be90e73c92..27d8a07718 100644 --- a/dts/src/arm/ste-snowball.dts +++ b/dts/src/arm/ste-snowball.dts @@ -4,7 +4,7 @@ */ /dts-v1/; -#include "ste-db8500.dtsi" +#include "ste-db9500.dtsi" #include "ste-href-ab8500.dtsi" #include "ste-href-family-pinctrl.dtsi" diff --git a/dts/src/arm64/broadcom/stingray/stingray-usb.dtsi b/dts/src/arm64/broadcom/stingray/stingray-usb.dtsi index aef8f2b007..5401a646c8 100644 --- a/dts/src/arm64/broadcom/stingray/stingray-usb.dtsi +++ b/dts/src/arm64/broadcom/stingray/stingray-usb.dtsi @@ -4,11 +4,16 @@ */ usb { compatible = "simple-bus"; - dma-ranges; #address-cells = <2>; #size-cells = <2>; ranges = <0x0 0x0 0x0 0x68500000 0x0 0x00400000>; + /* + * Internally, USB bus to the interconnect can only address up + * to 40-bit + */ + dma-ranges = <0 0 0 0 0x100 0x0>; + usbphy0: usb-phy@0 { compatible = "brcm,sr-usb-combo-phy"; reg = <0x0 0x00000000 0x0 0x100>; diff --git a/dts/src/arm64/freescale/fsl-ls1028a.dtsi b/dts/src/arm64/freescale/fsl-ls1028a.dtsi index 60ff19fa53..6c8a61c2cc 100644 --- a/dts/src/arm64/freescale/fsl-ls1028a.dtsi +++ b/dts/src/arm64/freescale/fsl-ls1028a.dtsi @@ -101,7 +101,7 @@ reboot { compatible ="syscon-reboot"; regmap = <&rst>; - offset = <0xb0>; + offset = <0>; mask = <0x02>; }; diff --git a/dts/src/arm64/freescale/imx8mn.dtsi b/dts/src/arm64/freescale/imx8mn.dtsi index ee17902304..2a79e89f82 100644 --- a/dts/src/arm64/freescale/imx8mn.dtsi +++ b/dts/src/arm64/freescale/imx8mn.dtsi @@ -253,7 +253,7 @@ #size-cells = <1>; ranges; - spba: bus@30000000 { + spba: spba-bus@30000000 { compatible = "fsl,spba-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; diff --git a/dts/src/arm64/freescale/imx8mp.dtsi b/dts/src/arm64/freescale/imx8mp.dtsi index ecccfbb4f5..23f5a5e371 100644 --- a/dts/src/arm64/freescale/imx8mp.dtsi +++ b/dts/src/arm64/freescale/imx8mp.dtsi @@ -266,7 +266,7 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; - gpio-ranges = <&iomuxc 0 56 26>, <&iomuxc 0 144 4>; + gpio-ranges = <&iomuxc 0 56 26>, <&iomuxc 26 144 4>; }; gpio4: gpio@30230000 { |