1187 files changed, 68876 insertions, 15228 deletions

diff --git a/Documentation/boards/mips/qemu-malta.rst b/Documentation/boards/mips/qemu-malta.rst
index fd37d5edb2..44f671638d 100644
--- a/Documentation/boards/mips/qemu-malta.rst
+++ b/Documentation/boards/mips/qemu-malta.rst
@@ -35,7 +35,7 @@ Using GXemul
 GXemul supports MIPS Malta except PCI stuff.
 You can use GXemul to run little-endian barebox (use gxemul-malta_defconfig).
 
-N.B. There is no need to swap words in ``zbarebox.bin`` for little-endian GXemul!
+N.B. There is no need to swap words in the barebox binary for little-endian GXemul!
 
 GXemul run string:
 
diff --git a/Documentation/boards/openrisc.rst b/Documentation/boards/openrisc.rst
index 34586b4a76..17b0aef4a6 100644
--- a/Documentation/boards/openrisc.rst
+++ b/Documentation/boards/openrisc.rst
@@ -22,7 +22,7 @@ Example of downloading and installing a toolchain::
   $ export PATH=$PATH:$PWD/or1k-elf/bin
 
 Running OpenRISC barebox on qemu
-------------------------------
+--------------------------------
 
 Running barebox on qemu is similar to running linux on qemu see more details on
 the qemu wiki site at https://wiki.qemu.org/Documentation/Platforms/OpenRISC
diff --git a/Documentation/devel/devel.rst b/Documentation/devel/devel.rst
index f703c3bf27..39070074ca 100644
--- a/Documentation/devel/devel.rst
+++ b/Documentation/devel/devel.rst
@@ -10,6 +10,7 @@ Contents:
 
    porting
    background-execution
+   project-ideas
 
 * :ref:`search`
 * :ref:`genindex`
diff --git a/Documentation/devel/project-ideas.rst b/Documentation/devel/project-ideas.rst
new file mode 100644
index 0000000000..f27e4d5406
--- /dev/null
+++ b/Documentation/devel/project-ideas.rst
@@ -0,0 +1,174 @@
+#####################
+barebox Project Ideas
+#####################
+
+This section collects ideas to improve barebox and should serve as a pool
+of ideas for people who want to enter the field of firmware development
+but need some guidance what to work on.
+
+These tasks can be adopted as part of programs like Google Summer of Code
+or by motivated individuals outside such programs.
+
+If you find a project interesting and would like to work on it, reach out
+to the :ref:`mailing list <feedback>` and we can together
+try to figure out whether you are a good match for the project.
+
+This list can be edited and extended by sending patches to the mailing list.
+Other interesting ideas: Support for new file systems (EROFS, extfat, btrfs).
+Switch device framework (currently scripts write into a ``/dev/switch`` file
+to configure passthrough), Improvements for barebox-efi (e.g. as a coreboot
+payload), ... etc.
+
+Address static analyzer feedback for barebox
+============================================
+
+Skills: C
+
+barebox is automatically tested using Synopsys' free "Coverity Scan" service.
+The static analyzer has so far identified 191 possible defects at
+https://scan.coverity.com/projects/barebox
+
+There is a number of false positives there, but it already helped us
+find actual regressions, e.g. 610720857348 ("fs: ext4: fix bogus behavior
+on failure to read ext4 block").
+
+To make this service more useful, the project would involve categorizing
+reported issues and handling them as appropriate: Mark them as not applicable
+if false positive or provide patches to fix real issues.
+
+This project does not require dedicated hardware. QEMU or barebox built
+to run under Linux (sandbox) may be used.
+
+Update barebox networking stack for IPv6 support
+================================================
+
+Skills: C, Networking
+
+The barebox network stack is mainly used for TFTP and NFSv3 (over UDP) boot.
+Most embedded systems barebox runs on aren't deployed to IPv6 networks yet,
+so it's the right time now to future-proof and learn more about networking
+internals. One major complication with IPv6 support is neighbor discovery
+protocols that require networking to be possible "in the background".
+barebox' recent improvements of resource sharing and cooperative scheduling
+makes it possible to integrate an IPv6 stack, e.g. lwIP.
+
+There are also community patches to integrate a TCP stack into barebox.
+These can be evaluated as time allows.
+
+This project does not require dedicated hardware. QEMU or barebox built
+to run under Linux (sandbox) may be used.
+
+Improving barebox test coverage
+===============================
+
+Skills: C
+
+barebox is normally tested end-to-end as part of a deployed system.
+More selftests/emulated tests would reduce the round trip time for testing
+and thus enable more widely tested patches. A framework has been recently
+merged to enable this:
+
+    * Selftest similar to the kernel can be registered and run. These
+      directly interface with C-Code.
+    * Labgrid tests: These boot barebox in a virtual machine or on real
+      hardware and use the shell to test barebox behaviors.
+
+This project will focus on improving the testing coverage by writing more
+tests for barebox functionality and by fuzzing the parsers available in
+barebox, with special consideration to the FIT parser, which is used in
+secure booting setups.
+
+This project does not require dedicated hardware. QEMU or barebox built
+to run under Linux (sandbox) may be used.
+
+Porting barebox to new hardware
+===============================
+
+Skills: C, low-level affinity
+
+While Linux and Linux userspace can be quite generic with respect to the
+hardware it runs on, the bucket needs to stop somewhere: barebox needs
+detailed knowledge of the hardware to initialize it and to pass this
+along information to Linux. In this project, familiarity with barebox
+and a new unsupported SoC will be established with the goal of porting
+barebox to run on it. Prospective developers can suggest suitable
+hardware (boards/SoCs) they are interested in. Preference is for
+hardware, which is generally available and has more open documentation.
+
+The goal is to have enough support to run barebox on the board, set up
+RAM and load a kernel from non-volatile storage and boot it.
+
+If time allows (because most drivers are already available in barebox),
+new drivers can be ported to enable not only running Linux on the board,
+but bareDOOM as well.
+
+This project requires embedded hardware with preferably an ARM SoC, as
+these have the widest barebox support, but other architectures are ok
+as well.
+
+Improve barebox RISC-V support
+==============================
+
+Skills: C, RISC-V interest, low-level affinity
+
+barebox supports a number of both soft and hardRISC-V targets,
+e.g.: BeagleV, HiFive, LiteX and the QEMU/TinyEMU Virt machine.
+
+Unlike e.g. ARM and MIPS, RISC-V support is still in its formative
+stage, so much opportunity in implementing the gritty details:
+
+    - Physical memory protection in M-Mode to trap access violations
+    - MMU support in S-Mode to trap access violations
+    - Improve barebox support for multiple harts (hardware threads)
+
+This project does not require dedicated hardware. QEMU can be used.
+
+Improve barebox I/O performance
+===============================
+
+Skills: C, low-level affinity
+
+On a normal modern system, booting may involve mounting and traversing
+a file system, which employs caching for directory entries and sits
+on top of a block device which caches blocks previously read from the
+hardware driver, often by means of DMA. There are a number of improvements
+possible to increase throughput of barebox I/O:
+
+    - Support for higher MMC speed modes: The maximum currently supported
+      is 50/52 MHz and no DDR.
+    - More efficient erase: Communication protocols like Android Fastboot
+      encode large blocks of zeros specially. MMCs with erase-to-zero
+      capability could perform such erases in the background instead
+      of having to write big chunks of zeros.
+    - Block layer block sizes: There is a fixed block size used for
+      caching, which is meant to be a good compromise for read
+      and write performance. This may not be optimal for all devices
+      and can be revisited.
+
+This project requires embedded hardware with SD/eMMC that is supported
+by a barebox media card interface (MCI) driver.
+
+Improve JSBarebox, the barebox web demo
+=======================================
+
+Skills: C (Basics), Javascript/Web-assembly, Browser-Profiling
+
+While Linux and Linux userspace can be quite generic with respect to the
+hardware it runs on, the bucket needs to stop somewhere: barebox needs
+detailed knowledge of the hardware to initialize it and to pass this
+along information to Linux. JSBarebox removes the hurdle of porting
+barebox to a new board, for new users who are only interested in
+trying it out: The browser runs Tinyemu, a virtual machine in which
+barebox executes as if on real hardware and the user can manipulate the
+(virtual) hardware from the barebox shell and learn about barebox
+conveniences: barebox.org/jsbarebox/
+
+The project is about streamlining this demo: CPU usage currently is
+quite high and teaching barebox to idle the CPU (as we do on sandbox)
+didn't help. This needs to be analyzed with the profiling tools
+provided with modern browsers. The remainder of the project can then
+focus on improving the jsbarebox tutorial. e.g. by adding new
+peripherals to the virtual machine.
+
+This project does not require dedicated hardware. The development
+machine need only support a recent browser.
diff --git a/Documentation/devicetree/index.rst b/Documentation/devicetree/index.rst
index 198c4893ff..d03db3cf82 100644
--- a/Documentation/devicetree/index.rst
+++ b/Documentation/devicetree/index.rst
@@ -114,4 +114,5 @@ Contents:
    bindings/leds/*
    bindings/misc/*
    bindings/mtd/*
+   bindings/regulator/*
    bindings/rtc/*
diff --git a/Documentation/index.rst b/Documentation/index.rst
index 836dc41af2..a3e019e9f0 100644
--- a/Documentation/index.rst
+++ b/Documentation/index.rst
@@ -20,6 +20,7 @@ Contents:
    glossary
    devicetree/*
    devel/devel.rst
+   talks
 
 * :ref:`search`
 * :ref:`genindex`
diff --git a/Documentation/talks.rst b/Documentation/talks.rst
new file mode 100644
index 0000000000..5f1af59931
--- /dev/null
+++ b/Documentation/talks.rst
@@ -0,0 +1,130 @@
+Talks and Lectures
+==================
+
+This is a collection of talks held about barebox use and development
+at different technical conferences. The most recent overview talk
+is from 2020:
+
+Beyond 'Just' Booting: Barebox Bells and Whistles
+-------------------------------------------------
+
+Ahmad Fatoum, Embedded Linux Conference - Europe 2020
+`[slides] <https://elinux.org/images/9/9d/Barebox-bells-n-whistles.pdf>`__
+`[video] <https://www.youtube.com/watch?v=fru1n54s2W4>`__
+
+   Porting barebox to a new STM32MP1 board and a general discussion
+   of design choices like multi-image, VFS, POSIX/Linux API,
+   fail-safe updates, boot fall-back mechanisms, etc.
+
+Besides older overview talks, there's a number of talks held
+about different aspects of barebox use.
+These are listed here in reverse chronological order.
+
+DOOM portieren für Einsteiger - Heavy Metal auf Bare Metal (German)
+-------------------------------------------------------------------
+
+Ahmad Fatoum, FrOSCon 2021
+`[slides] <https://programm.froscon.de/2021/system/event_attachments/attachments/000/000/622/original/heavy-metal-on-bare-metal.pdf>`__
+`[video] <https://media.ccc.de/v/froscon2021-2687-doom_portieren_fur_einsteiger>`__
+
+  "DOOM as a boot splash. How, why and how to get it on your nearest
+  home appliance". A (German) walkthrough on how to leverage barebox
+  APIs to run DOOM on any hardware supported by barebox.
+
+Initializing RISC-V: A Guided Tour for ARM Developers
+-----------------------------------------------------
+
+Rouven Czerwinski & Ahmad Fatoum, Embedded Linux Conference 2021
+`[slides] <https://elinux.org/images/8/80/Initializing-riscv.pdf>`__
+`[video] <https://www.youtube.com/watch?v=70oYYuflFLs>`__
+
+  A guide through the RISC-V architecture and some of its ISA extensions
+  and a walkthrough of the barebox port to the Beagle-V Starlight.
+
+From Reset Vector to Kernel - Navigating the ARM Matryoshka
+-----------------------------------------------------------
+
+Ahmad Fatoum, FOSDEM 2021
+`[slides & video] <https://archive.fosdem.org/2021/schedule/event/from_reset_vector_to_kernel/>`__
+
+  A walkthrough of NXP i.MX8M bootstrap. From Boot ROM through barebox to Linux.
+
+Booting your i.MX processor secure and implementing i.MX8 secure boot in barebox
+--------------------------------------------------------------------------------
+
+Rouven Czerwinski, `Stratum 0 Talk 2019 <https://stratum0.org/wiki/Vortr%C3%A4ge/Vorbei#2019>`__
+`[video] <https://www.youtube.com/watch?v=ZUGLEulZLWM>`__
+
+  A walkthrough of NXP i.MX8MQ high assurance boot with barebox.
+
+Porting Barebox to the Digi CC-MX6UL SBC Pro (German)
+-----------------------------------------------------
+
+Rouven Czerwinski, `Stratum 0 Live-Hacking 2019 <https://stratum0.org/wiki/Vortr%C3%A4ge/Vorbei#2019>`__
+`[video] <https://www.youtube.com/watch?v=FIwF6GfmsWM>`__
+
+  Live-coding a barebox port to a new i.MX6UL board while
+  explaining the details (in German).
+
+Remote update adventures with RAUC, Yocto and Barebox
+-----------------------------------------------------
+
+Patrick Boettcher, `Embedded Recipes 2019 <https://embedded-recipes.org/2019/remote-update-adventures-with-rauc-yocto-and-barebox/>`__
+`[video] <https://www.youtube.com/watch?v=hS3Fjf7fuHM>`__
+
+  Remote update and redundant boot of Embedded Linux devices
+  in the field with RAUC and barebox bootchooser.
+
+Verified Boot: From ROM to Userspace
+------------------------------------
+
+Marc Kleine-Budde, Embedded Linux Conference - Europe 2016
+`[slides] <https://elinux.org/images/f/f8/Verified_Boot.pdf>`__
+`[video] <https://www.youtube.com/watch?v=lkFKtCh2SaU>`__
+
+  Using FOSS components, including barebox, for a cryptographically
+  secured boot chain on NXP i.MX6 SoCs.
+
+Booting Linux Made Easy: A Barebox Update
+-----------------------------------------
+
+Robert Schwebel, `FOSDEM 2014 <https://archive.fosdem.org/2014/schedule/event/_booting_linux_made_easy:_a_barebox_update/>`__
+`[video] <https://www.youtube.com/watch?v=p-mHAQaJQcM>`__
+
+  An overview talk on barebox use in embedded Linux systems.
+
+Barebox and Bootloader Specification
+------------------------------------
+
+Sascha Hauer, Embedded Linux Conference - Europe 2013
+`[slides] <https://elinux.org/images/9/90/Barebox-elce2013-bootloaderspec.pdf>`__
+`[video] <https://www.youtube.com/watch?v=Z8FcIGXox_Y>`__
+
+  The freedesktop.org bootloader specification and its support in barebox.
+
+Barebox Bootloader
+------------------
+
+Sascha Hauer, Embedded Linux Conference - Europe 2012
+`[slides] <https://elinux.org/images/6/6b/PRE-20121108-1-Barebox.pdf>`__
+`[video] <https://www.youtube.com/watch?v=oY8BjCEt_p8>`__
+
+  An update on barebox development progress with a discussion of newly
+  implemented features in the preceding three years.
+
+Barebox: Booting Linux Fast and Fancy
+-------------------------------------
+
+Robert Schwebel & Sascha Hauer, Embedded Linux Conference - Europe 2010
+`[slides] <https://elinux.org/images/8/89/ELCE-2010-Barebox-Booting-Linux-Fast-and-Fancy.pdf>`__
+
+  Boot time optimization while using barebox.
+
+U-Boot-v2
+---------
+
+Sascha Hauer & Marc Kleine-Budde, Embedded Linux Conference 2009
+`[slides] <https://elinux.org/images/9/90/Hauer-U_BootV2.pdf>`__
+
+  Early barebox (still named U-Boot v2 back then) presentation on
+  the motivation for the fork and the niceties made possible by it.
diff --git a/Documentation/user/barebox.rst b/Documentation/user/barebox.rst
index b6b7a57af3..7b37ddba77 100644
--- a/Documentation/user/barebox.rst
+++ b/Documentation/user/barebox.rst
@@ -203,9 +203,33 @@ Starting barebox
 Bringing barebox to a board for the first time is highly board specific, see your
 board documentation for initial bringup.
 
-barebox binaries are, where possible, designed to be startable second stage from another
-bootloader. For example, if you have U-Boot running on your board, you can start barebox
-with U-Boot's ``bootm`` command:
+For ARM and RISC-V, the barebox build can additionally generate a generic DT image
+(enable ``CONFIG_BOARD_ARM_GENERIC_DT`` or ``CONFIG_BOARD_RISCV_GENERIC_DT``,
+respectively). The resulting ``images/barebox-dt-2nd.img`` can be booted just
+like a Linux kernel that is passed an external device tree. For example:
+
+.. code-block:: console
+
+  U-Boot: tftp $kernel_addr barebox-dt-2nd.img
+  U-Boot: tftp $fdt_addr my-board.dtb
+  U-Boot: booti $kernel_addr - $fdt_addr
+
+For non-DT enabled-bootloaders or other architectures, often the normal barebox
+binaries can also be used as they are designed to be startable second stage
+from another bootloader, where possible. For example, if you have U-Boot running
+on your board, you can start barebox with U-Boot's ``bootm`` command. The bootm
+command doesn't support the barebox binaries directly, they first have to be
+converted to uImage format using the mkimage tool provided with U-Boot:
+
+.. code-block:: console
+
+  sh: mkimage -n barebox -A arm -T kernel -C none -a 0x80000000 -d \
+      build/images/barebox-freescale-imx53-loco.img image
+
+U-Boot expects the start address of the binary to be given in the image using the
+``-a`` option. The address depends on the board and must be an address which isn't
+used by U-Boot. You can pick the same address you would use for generating a kernel
+image for that board. The image can then be started with ``bootm``:
 
 .. code-block:: console
 
@@ -220,10 +244,11 @@ another barebox. For instance, if you mounted a TFTP server to ``/mnt/tftp``
 
   bootm /mnt/tftp/barebox.bin
 
-At least ``barebox.bin`` (with :ref:`pbl` support enabled ``arch/$ARCH/pbl/zbarebox.bin``)
-should be startable second stage. The flash binary (``barebox-flash-image``) may or may not
+At least ``barebox.bin`` (with :ref:`pbl` support enabled ``images/*.pblb``)
+should be startable second stage. The final binaries (``images/*.img``) may or may not
 be startable second stage as it may have SoC specific headers which prevent running second
-stage.
+stage. barebox will usually have handlers in-place to skip these headers, so
+it can chainload itself regardless.
 
 First Steps
 -----------
diff --git a/Documentation/user/introduction.rst b/Documentation/user/introduction.rst
index 8a980a70ab..e7388b8bc9 100644
--- a/Documentation/user/introduction.rst
+++ b/Documentation/user/introduction.rst
@@ -15,6 +15,8 @@ development binary as well as for lean production systems.
 Just like busybox is the Swiss Army Knife for embedded Linux,
 barebox is the Swiss Army Knife for bare metal, hence the name.
 
+.. _feedback:
+
 Feedback
 --------
 
@@ -24,6 +26,15 @@ discussion of barebox takes place here:
 
 http://lists.infradead.org/mailman/listinfo/barebox/
 
-There's also an IRC channel:
+Mails sent to the barebox mailing list are archived on
+`lore.barebox.org <https://lore.barebox.org/barebox/>`_.
+
+Patch series sent there can be fetched with `b4 <https://pypi.org/project/b4/>`_ ::
+
+   git config b4.midmask https://lore.barebox.org/%s
+   git config b4.linkmask https://lore.barebox.org/%s
+   b4 am https://lore.barebox.org/$messageid # replace with link
 
-IRC: #barebox (Freenode)
+There's also an IRC channel, which is
+`bridged to Matrix  <https://app.element.io/#/room/#barebox:matrix.org>`_:
+#barebox on Libera Chat
diff --git a/Documentation/user/pbl.rst b/Documentation/user/pbl.rst
index f9b2d20305..b0acd1a4f2 100644
--- a/Documentation/user/pbl.rst
+++ b/Documentation/user/pbl.rst
@@ -13,8 +13,7 @@ PBL is available for ARM and MIPS. It can be enabled in ``make menuconfig`` with
 the ``[*] Pre-Bootloader image`` option.
 
 The user visible difference is that with PBL support ``barebox.bin`` is no longer
-the final binary image, but instead ``arch/$ARCH/pbl/zbarebox.bin``. Use the
-``barebox-flash-image`` link which always points to the correct image.
+the final binary image, but instead the images are placed in ``images/``.
 
 Technical background
 --------------------
diff --git a/Documentation/user/watchdog.rst b/Documentation/user/watchdog.rst
index ff400317a0..0220965598 100644
--- a/Documentation/user/watchdog.rst
+++ b/Documentation/user/watchdog.rst
@@ -10,6 +10,15 @@ the bootloader. For these scenarios barebox provides the watchdog framework
 with the following functionality and at least ``CONFIG_WATCHDOG`` should be
 enabled.
 
+Disabling for development
+~~~~~~~~~~~~~~~~~~~~~~~~~
+
+The shorthand command ``wd -x`` will disable all watchdogs.
+If hardware (or driver) doesn't support turning off the watchdog,
+an autpoller will be registered to periodically feed watchdogs.
+This should only be needed for development.
+See :ref:`boot-watchdog-timeout` for how to use the watchdog in the field.
+
 Polling
 ~~~~~~~
 
@@ -98,6 +107,8 @@ device tree or via the ``priority`` device parameter. Normally, watchdogs
 that have a wider effect should be given the higher priority (e.g.
 PMIC watchdog resetting the board vs. SoC's watchdog resetting only itself).
 
+.. _boot-watchdog-timeout:
+
 Boot Watchdog Timeout
 ~~~~~~~~~~~~~~~~~~~~~
 
diff --git a/Makefile b/Makefile
index 4b4a921810..2380bda22d 100644
--- a/Makefile
+++ b/Makefile
@@ -1,6 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0
 VERSION = 2022
-PATCHLEVEL = 01
+PATCHLEVEL = 02
 SUBLEVEL = 0
 EXTRAVERSION =
 NAME = None
@@ -431,8 +431,9 @@ USERINCLUDE    := \
 
 # Use LINUXINCLUDE when you must reference the include/ directory.
 # Needed to be compatible with the O= option
-LINUXINCLUDE    := -Iinclude -I$(srctree)/dts/include \
+LINUXINCLUDE    := -Iinclude \
                    $(if $(building_out_of_srctree), -I$(srctree)/include) \
+                   -I$(srctree)/dts/include \
 		   -I$(srctree)/arch/$(SRCARCH)/include \
 		   -I$(objtree)/arch/$(SRCARCH)/include \
 		   $(USERINCLUDE)
diff --git a/arch/arm/mach-mxs/ocotp.c b/arch/arm/mach-mxs/ocotp.c
index 5f78d9d773..9bcd913cc1 100644
--- a/arch/arm/mach-mxs/ocotp.c
+++ b/arch/arm/mach-mxs/ocotp.c
@@ -229,7 +229,7 @@ int mxs_ocotp_read(void *buf, int count, int offset)
 	struct cdev *cdev;
 	int ret;
 
-	cdev = cdev_open(DRIVERNAME, O_RDONLY);
+	cdev = cdev_open_by_name(DRIVERNAME, O_RDONLY);
 	if (!cdev)
 		return -ENODEV;
 
diff --git a/arch/arm/mach-omap/xload.c b/arch/arm/mach-omap/xload.c
index 0fe78883d1..af9abf38b5 100644
--- a/arch/arm/mach-omap/xload.c
+++ b/arch/arm/mach-omap/xload.c
@@ -38,7 +38,7 @@ static void *read_image_head(const char *name)
 	struct cdev *cdev;
 	int ret;
 
-	cdev = cdev_open(name, O_RDONLY);
+	cdev = cdev_open_by_name(name, O_RDONLY);
 	if (!cdev) {
 		printf("failed to open %s\n", name);
 		return NULL;
@@ -86,7 +86,7 @@ static void *read_mtd_barebox(const char *partition)
 
 	to = xmalloc(size);
 
-	cdev = cdev_open(partition, O_RDONLY);
+	cdev = cdev_open_by_name(partition, O_RDONLY);
 	if (!cdev) {
 		printf("failed to open partition\n");
 		return NULL;
diff --git a/commands/mmc.c b/commands/mmc.c
index cbbb9d6151..1e62b71850 100644
--- a/commands/mmc.c
+++ b/commands/mmc.c
@@ -194,5 +194,6 @@ BAREBOX_CMD_HELP_END
 BAREBOX_CMD_START(mmc)
 	.cmd = do_mmc,
 	BAREBOX_CMD_OPTS("enh_area [-c] /dev/mmcX")
+	BAREBOX_CMD_GROUP(CMD_GRP_HWMANIP)
 	BAREBOX_CMD_HELP(cmd_mmc_help)
 BAREBOX_CMD_END
diff --git a/common/bootm.c b/common/bootm.c
index 89e3e93f2c..4652467448 100644
--- a/common/bootm.c
+++ b/common/bootm.c
@@ -709,15 +709,15 @@ int bootm_boot(struct bootm_data *bootm_data)
 			const char *root_dev_name = devpath_to_name(bootm_data->root_dev);
 			const struct cdev *root_cdev = cdev_by_name(root_dev_name);
 
-			if (root_cdev && root_cdev->partuuid[0] != 0) {
-				rootarg = basprintf("root=PARTUUID=%s", root_cdev->partuuid);
+			if (root_cdev && root_cdev->uuid[0] != 0) {
+				rootarg = basprintf("root=PARTUUID=%s", root_cdev->uuid);
 			} else {
 				rootarg = ERR_PTR(-EINVAL);
 
 				if (!root_cdev)
 					pr_err("no cdev found for %s, cannot set root= option\n",
 						root_dev_name);
-				else if (!root_cdev->partuuid[0])
+				else if (!root_cdev->uuid[0])
 					pr_err("%s doesn't have a PARTUUID, cannot set root= option\n",
 						root_dev_name);
 			}
diff --git a/common/efi/payload/init.c b/common/efi/payload/init.c
index 6db6b23895..1541683186 100644
--- a/common/efi/payload/init.c
+++ b/common/efi/payload/init.c
@@ -349,7 +349,9 @@ static int efi_late_init(void)
 		if (IS_ERR(root))
 			return PTR_ERR(root);
 
-		of_set_root_node(root);
+		ret = barebox_register_of(root);
+		if (ret)
+			pr_warn("Failed to register device-tree: %pe\n", ERR_PTR(ret));
 
 		np = of_find_node_by_alias(root, "state");
 
diff --git a/common/filetype.c b/common/filetype.c
index 8ffcd6adcd..2039134516 100644
--- a/common/filetype.c
+++ b/common/filetype.c
@@ -438,7 +438,7 @@ enum filetype cdev_detect_type(const char *name)
 	struct cdev *cdev;
 	void *buf;
 
-	cdev = cdev_open(name, O_RDONLY);
+	cdev = cdev_open_by_name(name, O_RDONLY);
 	if (!cdev)
 		return type;
 
diff --git a/common/imd.c b/common/imd.c
index 0295d84d34..9ca0248523 100644
--- a/common/imd.c
+++ b/common/imd.c
@@ -21,6 +21,11 @@ static inline void read_file_2_free(void *buf)
 {
 	free(buf);
 }
+
+static int imd_read_file(const char *filename, size_t *size, void **outbuf)
+{
+	return read_file_2(filename, size, outbuf, 0x100000);
+}
 #endif
 
 /*
@@ -473,7 +478,7 @@ int imd_command(int argc, char *argv[])
 
 	filename = argv[optind];
 
-	ret = read_file_2(filename, &size, &buf, 0x100000);
+	ret = imd_read_file(filename, &size, &buf);
 	if (ret && ret != -EFBIG)
 		return -errno;
 
diff --git a/common/partitions.c b/common/partitions.c
index b579559672..9cca5c4a15 100644
--- a/common/partitions.c
+++ b/common/partitions.c
@@ -51,7 +51,7 @@ static int register_one_partition(struct block_device *blk,
 	cdev->flags |= DEVFS_PARTITION_FROM_TABLE;
 
 	cdev->dos_partition_type = part->dos_partition_type;
-	strcpy(cdev->partuuid, part->partuuid);
+	strcpy(cdev->uuid, part->partuuid);
 
 	free(partition_name);
 
diff --git a/common/partitions/dos.c b/common/partitions/dos.c
index 6c76aac371..566c8dd949 100644
--- a/common/partitions/dos.c
+++ b/common/partitions/dos.c
@@ -182,6 +182,9 @@ static void dos_partition(void *buf, struct block_device *blk,
 	struct disk_signature_priv *dsp;
 	uint32_t signature = get_unaligned_le32(buf + 0x1b8);
 
+	if (signature)
+		sprintf(blk->cdev.uuid, "%08x", signature);
+
 	table = (struct partition_entry *)&buffer[446];
 
 	for (i = 0; i < 4; i++) {
@@ -200,6 +203,8 @@ static void dos_partition(void *buf, struct block_device *blk,
 			pd->used_entries++;
 
 			if (is_extended_partition(&pentry)) {
+				pd->parts[n].size = 2;
+
 				if (!extended_partition)
 					extended_partition = &pd->parts[n];
 				else
diff --git a/common/partitions/efi.c b/common/partitions/efi.c
index 6d811bfb3b..0787b93f12 100644
--- a/common/partitions/efi.c
+++ b/common/partitions/efi.c
@@ -445,6 +445,8 @@ static void efi_partition(void *buf, struct block_device *blk,
 		return;
 	}
 
+	snprintf(blk->cdev.uuid, sizeof(blk->cdev.uuid), "%pUl", &gpt->disk_guid);
+
 	nb_part = le32_to_cpu(gpt->num_partition_entries);
 
 	if (nb_part > MAX_PARTITION) {
diff --git a/common/partitions/parser.h b/common/partitions/parser.h
index 69508932b3..d67f8e1d6a 100644
--- a/common/partitions/parser.h
+++ b/common/partitions/parser.h
@@ -17,7 +17,7 @@
 struct partition {
 	char name[MAX_PARTITION_NAME];
 	u8 dos_partition_type;
-	char partuuid[MAX_PARTUUID_STR];
+	char partuuid[MAX_UUID_STR];
 	uint64_t first_sec;
 	uint64_t size;
 };
diff --git a/drivers/base/driver.c b/drivers/base/driver.c
index f54f4d0b37..2347b5c71f 100644
--- a/drivers/base/driver.c
+++ b/drivers/base/driver.c
@@ -270,6 +270,36 @@ int unregister_device(struct device_d *old_dev)
 }
 EXPORT_SYMBOL(unregister_device);
 
+/**
+ * free_device_res - free dynamically allocated device members
+ * @dev: The device
+ *
+ * This frees dynamically allocated resources allocated during device
+ * lifetime, but not the device itself.
+ */
+void free_device_res(struct device_d *dev)
+{
+	free(dev->name);
+	dev->name = NULL;
+	free(dev->unique_name);
+	dev->unique_name = NULL;
+}
+EXPORT_SYMBOL(free_device_res);
+
+/**
+ * free_device - free a device
+ * @dev: The device
+ *
+ * This frees dynamically allocated resources allocated during device
+ * lifetime and finally the device itself.
+ */
+void free_device(struct device_d *dev)
+{
+	free_device_res(dev);
+	free(dev);
+}
+EXPORT_SYMBOL(free_device);
+
 /*
  * Loop over list of deferred devices as long as at least one
  * device is successfully probed. Devices that again request
diff --git a/drivers/clk/imx/clk-imx6.c b/drivers/clk/imx/clk-imx6.c
index 6935a8e852..e3afcf7858 100644
--- a/drivers/clk/imx/clk-imx6.c
+++ b/drivers/clk/imx/clk-imx6.c
@@ -60,8 +60,8 @@ static inline int cpu_mx6_is_plus(void)
 
 /* Audio/Video PLL post dividers don't work on i.MX6q revision 1.0 */
 static inline int cpu_has_working_video_pll_post_div(void) {
-	return !((cpu_is_mx6q() || cpu_is_mx6d()) &&
-		 imx_silicon_revision() == IMX_CHIP_REV_1_0);
+	return !((cpu_mx6_is_mx6q() || cpu_mx6_is_mx6d()) &&
+		 __imx6_cpu_revision() == IMX_CHIP_REV_1_0);
 }
 
 /* i.MX6 Quad/Dual/DualLite/Solo are all affected */
diff --git a/drivers/clk/imx/clk-imx8mp.c b/drivers/clk/imx/clk-imx8mp.c
index be395a6d55..b208ade9e6 100644
--- a/drivers/clk/imx/clk-imx8mp.c
+++ b/drivers/clk/imx/clk-imx8mp.c
@@ -543,7 +543,6 @@ static int imx8mp_clocks_init(struct device_node *ccm_np)
 	hws[IMX8MP_CLK_MIPI_DSI_ESC_RX] = imx8m_clk_hw_composite_bus("mipi_dsi_esc_rx", imx8mp_mipi_dsi_esc_rx_sels, ccm_base + 0x9200);
 
 	hws[IMX8MP_CLK_IPG_ROOT] = imx_clk_hw_divider2("ipg_root", "ahb_root", ccm_base + 0x9080, 0, 1);
-	hws[IMX8MP_CLK_IPG_AUDIO_ROOT] = imx_clk_hw_divider2("ipg_audio_root", "audio_ahb", ccm_base + 0x9180, 0, 1);
 
 	hws[IMX8MP_CLK_DRAM_ALT] = imx8m_clk_hw_composite("dram_alt", imx8mp_dram_alt_sels, ccm_base + 0xa000);
 	hws[IMX8MP_CLK_DRAM_APB] = imx8m_clk_hw_composite_critical("dram_apb", imx8mp_dram_apb_sels, ccm_base + 0xa080);
diff --git a/drivers/firmware/zynqmp-fpga.c b/drivers/firmware/zynqmp-fpga.c
index a76600d4c9..63d7398fd4 100644
--- a/drivers/firmware/zynqmp-fpga.c
+++ b/drivers/firmware/zynqmp-fpga.c
@@ -252,13 +252,7 @@ static int fpgamgr_program_finish(struct firmware_handler *fh)
 				   body_length / sizeof(u32));
 	else
 		memcpy((u32 *)buf_aligned, body, body_length);
-
-	if (mgr->features & ZYNQMP_PM_FEATURE_SIZE_NOT_NEEDED) {
-		buf_size = body_length;
-	} else {
-		buf_aligned[body_length / sizeof(*buf_aligned)] = body_length;
-		buf_size = addr + body_length;
-	}
+	buf_aligned[body_length / sizeof(*buf_aligned)] = body_length;
 
 	addr = dma_map_single(&mgr->dev, buf_aligned,
 			      body_length + sizeof(buf_size), DMA_TO_DEVICE);
@@ -267,6 +261,11 @@ static int fpgamgr_program_finish(struct firmware_handler *fh)
 		goto err_free_dma;
 	}
 
+	if (mgr->features & ZYNQMP_PM_FEATURE_SIZE_NOT_NEEDED)
+		buf_size = body_length;
+	else
+		buf_size = addr + body_length;
+
 	status = mgr->eemi_ops->fpga_load((u64)addr, buf_size, flags);
 	dma_unmap_single(&mgr->dev, addr, body_length + sizeof(buf_size),
 			 DMA_TO_DEVICE);
diff --git a/drivers/mci/atmel-sdhci-common.c b/drivers/mci/atmel-sdhci-common.c
index eff2a993db..129480aa55 100644
--- a/drivers/mci/atmel-sdhci-common.c
+++ b/drivers/mci/atmel-sdhci-common.c
@@ -302,11 +302,11 @@ static int at91_sdhci_set_bus_width(struct at91_sdhci *host, unsigned bus_width)
 		break;
 	case MMC_BUS_WIDTH_4:
 		reg &= ~SDHCI_CTRL_8BITBUS;
-		reg |= SDHCI_CTRL_8BITBUS;
+		reg |= SDHCI_CTRL_4BITBUS;
 		break;
 	default:
 		reg &= ~SDHCI_CTRL_8BITBUS;
-		reg &= ~SDHCI_CTRL_8BITBUS;
+		reg &= ~SDHCI_CTRL_4BITBUS;
 	}
 
 	sdhci_write8(sdhci, SDHCI_HOST_CONTROL, reg);
diff --git a/drivers/mci/dove-sdhci.c b/drivers/mci/dove-sdhci.c
index e6ac769bde..7581511285 100644
--- a/drivers/mci/dove-sdhci.c
+++ b/drivers/mci/dove-sdhci.c
@@ -181,13 +181,13 @@ static void dove_sdhci_mci_set_ios(struct mci_host *mci, struct mci_ios *ios)
 
 	/* set bus width */
 	val = sdhci_read8(&host->sdhci, SDHCI_HOST_CONTROL) &
-		~(SDHCI_CTRL_8BITBUS | SDHCI_CTRL_8BITBUS);
+		~(SDHCI_CTRL_4BITBUS | SDHCI_CTRL_8BITBUS);
 	switch (ios->bus_width) {
 	case MMC_BUS_WIDTH_8:
 		val |= SDHCI_CTRL_8BITBUS;
 		break;
 	case MMC_BUS_WIDTH_4:
-		val |= SDHCI_CTRL_8BITBUS;
+		val |= SDHCI_CTRL_4BITBUS;
 		break;
 	}
 
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 5ab0506cd9..78c9c193d8 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -47,4 +47,27 @@ config STARFIVE_PWRSEQ
 	  be accessed over /dev/mem or used from kernels which still depend
 	  on bootloader for initialization.
 
+config STORAGE_BY_UUID
+	bool "storage by UUID"
+	depends on OFDEVICE
+	help
+	  This adds a driver which matches to a "barebox,storage-by-uuid"
+	  compatible node. The driver looks for a storage device matching the
+	  given UUID and when found registers a new cdev for the device.
+
+	  This driver solved a very specific problem. On EFI the storage devices
+	  are not connected to any device tree node. barebox-state however expects
+	  a node to use as its backend. The obvious solution would be to create
+	  a partition with a specific partuuid and use that for state, in our
+	  special usecase though the storage device is partitioned with a MBR
+	  which doesn't have any space left to create a new partition. As this
+	  driver parses the of partition binding we can use that to create
+	  a partition in an unallocated are of the disk which is then used for
+	  state.
+
+	  This driver has the problem that it depends on storage devices which
+	  are not described in the device tree. This means it cannot work with
+	  deep probe. This is not a problem on EFI though. It's a special purpose
+	  driver, it's not recommended for general use.
+
 endmenu
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index 6326e784fc..986f7b1b38 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -9,3 +9,4 @@ obj-$(CONFIG_STATE_DRV)		+= state.o
 obj-$(CONFIG_DEV_MEM)		+= mem.o
 obj-$(CONFIG_UBOOTVAR)		+= ubootvar.o
 obj-$(CONFIG_STARFIVE_PWRSEQ)	+= starfive-pwrseq.o
+obj-$(CONFIG_STORAGE_BY_UUID)	+= storage-by-uuid.o
diff --git a/drivers/misc/storage-by-uuid.c b/drivers/misc/storage-by-uuid.c
new file mode 100644
index 0000000000..12a06076a2
--- /dev/null
+++ b/drivers/misc/storage-by-uuid.c
@@ -0,0 +1,199 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include <common.h>
+#include <init.h>
+#include <io.h>
+#include <of.h>
+#include <malloc.h>
+#include <partition.h>
+#include <envfs.h>
+#include <fs.h>
+
+static LIST_HEAD(sbu_list);
+
+struct sbu {
+	char *uuid;
+	struct device_d *dev;
+	struct cdev *rcdev;
+	struct cdev cdev;
+	struct list_head list;
+};
+
+void storage_by_uuid_check_exist(struct cdev *cdev);
+
+static ssize_t sbu_read(struct cdev *cdev, void *buf, size_t count, loff_t offset, ulong flags)
+{
+	struct sbu *sbu = cdev->priv;
+
+	return cdev_read(sbu->rcdev, buf, count, offset, flags);
+}
+
+static ssize_t sbu_write(struct cdev *cdev, const void *buf, size_t count, loff_t offset, ulong flags)
+{
+	struct sbu *sbu = cdev->priv;
+
+	return cdev_write(sbu->rcdev, buf, count, offset, flags);
+}
+
+static int sbu_ioctl(struct cdev *cdev, int request, void *buf)
+{
+	struct sbu *sbu = cdev->priv;
+
+	return cdev_ioctl(sbu->rcdev, request, buf);
+}
+
+static int sbu_open(struct cdev *cdev, unsigned long flags)
+{
+	struct sbu *sbu = cdev->priv;
+
+	return cdev_open(sbu->rcdev, flags);
+}
+
+static int sbu_close(struct cdev *cdev)
+{
+	struct sbu *sbu = cdev->priv;
+
+	cdev_close(sbu->rcdev);
+
+	return 0;
+}
+
+static int sbu_flush(struct cdev *cdev)
+{
+	struct sbu *sbu = cdev->priv;
+
+	return cdev_flush(sbu->rcdev);
+}
+
+static int sbu_erase(struct cdev *cdev, loff_t count, loff_t offset)
+{
+	struct sbu *sbu = cdev->priv;
+
+	return cdev_erase(sbu->rcdev, count, offset);
+}
+
+static int sbu_protect(struct cdev *cdev, size_t count, loff_t offset, int prot)
+{
+	struct sbu *sbu = cdev->priv;
+
+	return cdev_protect(sbu->rcdev, count, offset, prot);
+}
+
+static int sbu_discard_range(struct cdev *cdev, loff_t count, loff_t offset)
+{
+	struct sbu *sbu = cdev->priv;
+
+	return cdev_discard_range(sbu->rcdev, count, offset);
+}
+
+static int sbu_memmap(struct cdev *cdev, void **map, int flags)
+{
+	struct sbu *sbu = cdev->priv;
+
+	return cdev_memmap(sbu->rcdev, map, flags);
+}
+
+static int sbu_truncate(struct cdev *cdev, size_t size)
+{
+	struct sbu *sbu = cdev->priv;
+
+	return cdev_truncate(sbu->rcdev, size);
+}
+
+static struct cdev_operations sbu_ops = {
+	.read = sbu_read,
+	.write = sbu_write,
+	.ioctl = sbu_ioctl,
+	.open = sbu_open,
+	.close = sbu_close,
+	.flush = sbu_flush,
+	.erase = sbu_erase,
+	.protect = sbu_protect,
+	.discard_range = sbu_discard_range,
+	.memmap = sbu_memmap,
+	.truncate = sbu_truncate,
+};
+
+static void storage_by_uuid_add_partitions(struct sbu *sbu, struct cdev *rcdev)
+{
+	int ret;
+
+	if (sbu->rcdev)
+		return;
+
+	sbu->rcdev = rcdev;
+	sbu->cdev.name = sbu->uuid;
+	sbu->cdev.size = rcdev->size;
+	sbu->cdev.ops = &sbu_ops;
+	sbu->cdev.dev = sbu->dev;
+	sbu->cdev.priv = sbu;
+
+	ret = devfs_create(&sbu->cdev);
+	if (ret) {
+		dev_err(sbu->dev, "Failed to create cdev: %s\n", strerror(-ret));
+		return;
+	}
+
+	of_parse_partitions(&sbu->cdev, sbu->dev->device_node);
+}
+
+static void check_exist(struct sbu *sbu)
+{
+	struct cdev *cdev;
+
+	for_each_cdev(cdev) {
+		if (!strcmp(cdev->uuid, sbu->uuid)) {
+			dev_dbg(sbu->dev, "Found %s %s\n", cdev->name, cdev->uuid);
+			storage_by_uuid_add_partitions(sbu, cdev);
+		}
+	}
+}
+
+static int sbu_detect(struct device_d *dev)
+{
+	struct sbu *sbu = dev->priv;
+
+	dev_dbg(dev, "%s\n", __func__);
+
+	check_exist(sbu);
+
+	return 0;
+}
+
+static int storage_by_uuid_probe(struct device_d *dev)
+{
+	struct sbu *sbu;
+	int ret;
+	const char *uuid;
+
+	sbu = xzalloc(sizeof(*sbu));
+
+	ret = of_property_read_string(dev->device_node, "uuid", &uuid);
+	if (ret)
+		return ret;
+
+	sbu->dev = dev;
+	sbu->uuid = xstrdup(uuid);
+
+	list_add_tail(&sbu->list, &sbu_list);
+
+	check_exist(sbu);
+	dev->priv = sbu;
+	dev->detect = sbu_detect;
+
+	return 0;
+}
+
+static struct of_device_id storage_by_uuid_dt_ids[] = {
+	{
+		.compatible = "barebox,storage-by-uuid",
+	}, {
+		/* sentinel */
+	}
+};
+
+static struct driver_d storage_by_uuid_driver = {
+	.name		= "storage-by-uuid",
+	.probe		= storage_by_uuid_probe,
+	.of_compatible	= storage_by_uuid_dt_ids,
+};
+device_platform_driver(storage_by_uuid_driver);
diff --git a/drivers/of/base.c b/drivers/of/base.c
index 80465d6d50..2591610c3f 100644
--- a/drivers/of/base.c
+++ b/drivers/of/base.c
@@ -2383,7 +2383,7 @@ static void of_platform_device_create_root(struct device_node *np)
 
 	ret = platform_device_register(dev);
 	if (ret)
-		free(dev);
+		free_device(dev);
 }
 
 static const struct of_device_id reserved_mem_matches[] = {
diff --git a/drivers/of/platform.c b/drivers/of/platform.c
index 3a82809cb3..0e718469db 100644
--- a/drivers/of/platform.c
+++ b/drivers/of/platform.c
@@ -155,7 +155,7 @@ struct device_d *of_platform_device_create(struct device_node *np,
 
 	np->dev = NULL;
 
-	free(dev);
+	free_device(dev);
 	if (num_reg)
 		free(res);
 	return NULL;
@@ -278,6 +278,7 @@ static struct device_d *of_amba_device_create(struct device_node *np)
 	return &dev->dev;
 
 amba_err_free:
+	free_device_res(&dev->dev);
 	free(dev);
 	return NULL;
 }
diff --git a/drivers/pinctrl/pinctrl-rockchip.c b/drivers/pinctrl/pinctrl-rockchip.c
index 869cce1982..c99074407f 100644
--- a/drivers/pinctrl/pinctrl-rockchip.c
+++ b/drivers/pinctrl/pinctrl-rockchip.c
@@ -877,7 +877,6 @@ static struct rockchip_pin_ctrl *rockchip_pinctrl_get_soc_data(
 	struct device_node *np;
 	struct rockchip_pin_ctrl *ctrl;
 	struct rockchip_pin_bank *bank;
-	char *name;
 	int grf_offs, pmu_offs, drv_grf_offs, drv_pmu_offs, i, j;
 	int gpio = 0;
 
diff --git a/drivers/serial/serial_cadence.c b/drivers/serial/serial_cadence.c
index 6cf18aa25a..84dcd1b76b 100644
--- a/drivers/serial/serial_cadence.c
+++ b/drivers/serial/serial_cadence.c
@@ -231,6 +231,12 @@ static __maybe_unused struct of_device_id cadence_serial_dt_ids[] = {
 		.compatible = "xlnx,xuartps",
 		.data = &cadence_r1p08_data,
 	}, {
+		.compatible = "cdns,uart-r1p12",
+		.data = &cadence_r1p08_data,
+	}, {
+		.compatible = "xlnx,zynqmp-uart",
+		.data = &cadence_r1p08_data,
+	}, {
 		/* sentinel */
 	}
 };
diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
index 4eede13a11..34a0f004f7 100644
--- a/drivers/usb/core/usb.c
+++ b/drivers/usb/core/usb.c
@@ -534,6 +534,7 @@ void usb_free_device(struct usb_device *usbdev)
 {
 	dma_free(usbdev->descriptor);
 	dma_free(usbdev->setup_packet);
+	free_device_res(&usbdev->dev);
 	free(usbdev);
 }
 
diff --git a/dts/Bindings/Makefile b/dts/Bindings/Makefile
index c9abfbe3f0..41c555181b 100644
--- a/dts/Bindings/Makefile
+++ b/dts/Bindings/Makefile
@@ -65,7 +65,9 @@ DT_DOCS = $(patsubst $(srctree)/%,%,$(shell $(find_all_cmd)))
 override DTC_FLAGS := \
 	-Wno-avoid_unnecessary_addr_size \
 	-Wno-graph_child_address \
-	-Wno-interrupt_provider
+	-Wno-interrupt_provider \
+	-Wno-unique_unit_address \
+	-Wunique_unit_address_if_enabled
 
 # Disable undocumented compatible checks until warning free
 override DT_CHECKER_FLAGS ?=
diff --git a/dts/Bindings/arm/apple.yaml b/dts/Bindings/arm/apple.yaml
index 1e772c8520..8d93e8a6cc 100644
--- a/dts/Bindings/arm/apple.yaml
+++ b/dts/Bindings/arm/apple.yaml
@@ -12,12 +12,19 @@ maintainers:
 description: |
   ARM platforms using SoCs designed by Apple Inc., branded "Apple Silicon".
 
-  This currently includes devices based on the "M1" SoC, starting with the
-  three Mac models released in late 2020:
+  This currently includes devices based on the "M1" SoC:
 
   - Mac mini (M1, 2020)
   - MacBook Pro (13-inch, M1, 2020)
   - MacBook Air (M1, 2020)
+  - iMac (24-inch, M1, 2021)
+
+  And devices based on the "M1 Pro" and "M1 Max" SoCs:
+
+  - MacBook Pro (14-inch, M1 Pro, 2021)
+  - MacBook Pro (14-inch, M1 Max, 2021)
+  - MacBook Pro (16-inch, M1 Pro, 2021)
+  - MacBook Pro (16-inch, M1 Max, 2021)
 
   The compatible property should follow this format:
 
@@ -56,8 +63,24 @@ properties:
               - apple,j274 # Mac mini (M1, 2020)
               - apple,j293 # MacBook Pro (13-inch, M1, 2020)
               - apple,j313 # MacBook Air (M1, 2020)
+              - apple,j456 # iMac (24-inch, 4x USB-C, M1, 2021)
+              - apple,j457 # iMac (24-inch, 2x USB-C, M1, 2021)
           - const: apple,t8103
           - const: apple,arm-platform
+      - description: Apple M1 Pro SoC based platforms
+        items:
+          - enum:
+              - apple,j314s # MacBook Pro (14-inch, M1 Pro, 2021)
+              - apple,j316s # MacBook Pro (16-inch, M1 Pro, 2021)
+          - const: apple,t6000
+          - const: apple,arm-platform
+      - description: Apple M1 Max SoC based platforms
+        items:
+          - enum:
+              - apple,j314c # MacBook Pro (14-inch, M1 Max, 2021)
+              - apple,j316c # MacBook Pro (16-inch, M1 Max, 2021)
+          - const: apple,t6001
+          - const: apple,arm-platform
 
 additionalProperties: true
 
diff --git a/dts/Bindings/arm/apple/apple,pmgr.yaml b/dts/Bindings/arm/apple/apple,pmgr.yaml
new file mode 100644
index 0000000000..b6b5d3a912
--- /dev/null
+++ b/dts/Bindings/arm/apple/apple,pmgr.yaml
@@ -0,0 +1,134 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/apple/apple,pmgr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Apple SoC Power Manager (PMGR)
+
+maintainers:
+  - Hector Martin <marcan@marcan.st>
+
+description: |
+  Apple SoCs include PMGR blocks responsible for power management,
+  which can control various clocks, resets, power states, and
+  performance features. This node represents the PMGR as a syscon,
+  with sub-nodes representing individual features.
+
+properties:
+  $nodename:
+    pattern: "^power-management@[0-9a-f]+$"
+
+  compatible:
+    items:
+      - enum:
+          - apple,t8103-pmgr
+          - apple,t6000-pmgr
+      - const: apple,pmgr
+      - const: syscon
+      - const: simple-mfd
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+patternProperties:
+  "power-controller@[0-9a-f]+$":
+    description:
+      The individual power management domains within this controller
+    type: object
+    $ref: /power/apple,pmgr-pwrstate.yaml#
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        power-management@23b700000 {
+            compatible = "apple,t8103-pmgr", "apple,pmgr", "syscon", "simple-mfd";
+            #address-cells = <1>;
+            #size-cells = <1>;
+            reg = <0x2 0x3b700000 0x0 0x14000>;
+
+            ps_sio: power-controller@1c0 {
+                compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+                reg = <0x1c0 8>;
+                #power-domain-cells = <0>;
+                #reset-cells = <0>;
+                label = "sio";
+                apple,always-on;
+            };
+
+            ps_uart_p: power-controller@220 {
+                compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+                reg = <0x220 8>;
+                #power-domain-cells = <0>;
+                #reset-cells = <0>;
+                label = "uart_p";
+                power-domains = <&ps_sio>;
+            };
+
+            ps_uart0: power-controller@270 {
+                compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+                reg = <0x270 8>;
+                #power-domain-cells = <0>;
+                #reset-cells = <0>;
+                label = "uart0";
+                power-domains = <&ps_uart_p>;
+            };
+        };
+
+        power-management@23d280000 {
+            compatible = "apple,t8103-pmgr", "apple,pmgr", "syscon", "simple-mfd";
+            #address-cells = <1>;
+            #size-cells = <1>;
+            reg = <0x2 0x3d280000 0x0 0xc000>;
+
+            ps_aop_filter: power-controller@4000 {
+                compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+                reg = <0x4000 8>;
+                #power-domain-cells = <0>;
+                #reset-cells = <0>;
+                label = "aop_filter";
+            };
+
+            ps_aop_base: power-controller@4010 {
+                compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+                reg = <0x4010 8>;
+                #power-domain-cells = <0>;
+                #reset-cells = <0>;
+                label = "aop_base";
+                power-domains = <&ps_aop_filter>;
+            };
+
+            ps_aop_shim: power-controller@4038 {
+                compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+                reg = <0x4038 8>;
+                #power-domain-cells = <0>;
+                #reset-cells = <0>;
+                label = "aop_shim";
+                power-domains = <&ps_aop_base>;
+            };
+
+            ps_aop_uart0: power-controller@4048 {
+                compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+                reg = <0x4048 8>;
+                #power-domain-cells = <0>;
+                #reset-cells = <0>;
+                label = "aop_uart0";
+                power-domains = <&ps_aop_shim>;
+            };
+        };
+    };
diff --git a/dts/Bindings/arm/arm,cci-400.yaml b/dts/Bindings/arm/arm,cci-400.yaml
index 4682f991a5..f8530a5086 100644
--- a/dts/Bindings/arm/arm,cci-400.yaml
+++ b/dts/Bindings/arm/arm,cci-400.yaml
@@ -166,16 +166,6 @@ examples:
               };
           };
 
-          dma0: dma@3000000 {
-              /* compatible = "arm,pl330", "arm,primecell"; */
-              cci-control-port = <&cci_control0>;
-              reg = <0x0 0x3000000 0x0 0x1000>;
-              interrupts = <10>;
-              #dma-cells = <1>;
-              #dma-channels = <8>;
-              #dma-requests = <32>;
-          };
-
           cci@2c090000 {
               compatible = "arm,cci-400";
               #address-cells = <1>;
diff --git a/dts/Bindings/arm/arm-dsu-pmu.txt b/dts/Bindings/arm/arm-dsu-pmu.txt
deleted file mode 100644
index 6efabba530..0000000000
--- a/dts/Bindings/arm/arm-dsu-pmu.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-* ARM DynamIQ Shared Unit (DSU) Performance Monitor Unit (PMU)
-
-ARM DyanmIQ Shared Unit (DSU) integrates one or more CPU cores
-with a shared L3 memory system, control logic and external interfaces to
-form a multicore cluster. The PMU enables to gather various statistics on
-the operations of the DSU. The PMU provides independent 32bit counters that
-can count any of the supported events, along with a 64bit cycle counter.
-The PMU is accessed via CPU system registers and has no MMIO component.
-
-** DSU PMU required properties:
-
-- compatible	: should be one of :
-
-		"arm,dsu-pmu"
-
-- interrupts	: Exactly 1 SPI must be listed.
-
-- cpus		: List of phandles for the CPUs connected to this DSU instance.
-
-
-** Example:
-
-dsu-pmu-0 {
-	compatible = "arm,dsu-pmu";
-	interrupts = <GIC_SPI 02 IRQ_TYPE_LEVEL_HIGH>;
-	cpus = <&cpu_0>, <&cpu_1>;
-};
diff --git a/dts/Bindings/arm/aspeed/aspeed,sbc.yaml b/dts/Bindings/arm/aspeed/aspeed,sbc.yaml
new file mode 100644
index 0000000000..c72aab7064
--- /dev/null
+++ b/dts/Bindings/arm/aspeed/aspeed,sbc.yaml
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
+# Copyright 2021 Joel Stanley, IBM Corp.
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/arm/aspeed/aspeed,sbc.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: ASPEED Secure Boot Controller
+
+maintainers:
+  - Joel Stanley <joel@jms.id.au>
+  - Andrew Jeffery <andrew@aj.id.au>
+
+description: |
+  The ASPEED SoCs have a register bank for interacting with the secure boot
+  controller.
+
+properties:
+  compatible:
+    items:
+      - const: aspeed,ast2600-sbc
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    sbc: secure-boot-controller@1e6f2000 {
+            compatible = "aspeed,ast2600-sbc";
+            reg = <0x1e6f2000 0x1000>;
+    };
diff --git a/dts/Bindings/arm/bcm/brcm,bcm4908.yaml b/dts/Bindings/arm/bcm/brcm,bcm4908.yaml
index 2cd4e4a322..9b745531ff 100644
--- a/dts/Bindings/arm/bcm/brcm,bcm4908.yaml
+++ b/dts/Bindings/arm/bcm/brcm,bcm4908.yaml
@@ -29,6 +29,7 @@ properties:
         items:
           - enum:
               - asus,gt-ac5300
+              - netgear,raxe500
           - const: brcm,bcm4908
 
       - description: BCM49408 based boards
diff --git a/dts/Bindings/arm/cpus.yaml b/dts/Bindings/arm/cpus.yaml
index f2ab6423b4..0dcebc48ea 100644
--- a/dts/Bindings/arm/cpus.yaml
+++ b/dts/Bindings/arm/cpus.yaml
@@ -137,6 +137,9 @@ properties:
       - arm,cortex-a75
       - arm,cortex-a76
       - arm,cortex-a77
+      - arm,cortex-a78
+      - arm,cortex-a510
+      - arm,cortex-a710
       - arm,cortex-m0
       - arm,cortex-m0+
       - arm,cortex-m1
@@ -145,8 +148,12 @@ properties:
       - arm,cortex-r4
       - arm,cortex-r5
       - arm,cortex-r7
+      - arm,cortex-x1
+      - arm,cortex-x2
       - arm,neoverse-e1
       - arm,neoverse-n1
+      - arm,neoverse-n2
+      - arm,neoverse-v1
       - brcm,brahma-b15
       - brcm,brahma-b53
       - brcm,vulcan
@@ -174,6 +181,7 @@ properties:
       - qcom,kryo560
       - qcom,kryo570
       - qcom,kryo685
+      - qcom,kryo780
       - qcom,scorpion
 
   enable-method:
diff --git a/dts/Bindings/arm/firmware/linaro,optee-tz.yaml b/dts/Bindings/arm/firmware/linaro,optee-tz.yaml
index c24047c1fd..9a426110a1 100644
--- a/dts/Bindings/arm/firmware/linaro,optee-tz.yaml
+++ b/dts/Bindings/arm/firmware/linaro,optee-tz.yaml
@@ -24,6 +24,12 @@ properties:
   compatible:
     const: linaro,optee-tz
 
+  interrupts:
+    maxItems: 1
+    description: |
+      This interrupt which is used to signal an event by the secure world
+      software is expected to be edge-triggered.
+
   method:
     enum: [smc, hvc]
     description: |
@@ -42,10 +48,12 @@ additionalProperties: false
 
 examples:
   - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
     firmware  {
         optee  {
             compatible = "linaro,optee-tz";
             method = "smc";
+            interrupts = <GIC_SPI 187 IRQ_TYPE_EDGE_RISING>;
         };
     };
 
diff --git a/dts/Bindings/arm/fsl.yaml b/dts/Bindings/arm/fsl.yaml
index 0b595b2606..97f6eebad7 100644
--- a/dts/Bindings/arm/fsl.yaml
+++ b/dts/Bindings/arm/fsl.yaml
@@ -240,6 +240,7 @@ properties:
               - uniwest,imx6q-evi         # Uniwest Evi
               - variscite,dt6customboard
               - wand,imx6q-wandboard      # Wandboard i.MX6 Quad Board
+              - ysoft,imx6q-yapp4-crux    # i.MX6 Quad Y Soft IOTA Crux board
               - zealz,imx6q-gk802         # Zealz GK802
               - zii,imx6q-zii-rdu2        # ZII RDU2 Board
           - const: fsl,imx6q
@@ -323,6 +324,20 @@ properties:
           - const: toradex,apalis_imx6q
           - const: fsl,imx6q
 
+      - description: TQ-Systems TQMa6Q SoM (variant A) on MBa6x
+        items:
+          - const: tq,imx6q-mba6x-a
+          - const: tq,mba6a               # Expected by bootloader, to be removed in the future
+          - const: tq,imx6q-tqma6q-a
+          - const: fsl,imx6q
+
+      - description: TQ-Systems TQMa6Q SoM (variant B) on MBa6x
+        items:
+          - const: tq,imx6q-mba6x-b
+          - const: tq,mba6b               # Expected by bootloader, to be removed in the future
+          - const: tq,imx6q-tqma6q-b
+          - const: fsl,imx6q
+
       - description: i.MX6QP based Boards
         items:
           - enum:
@@ -334,6 +349,7 @@ properties:
               - kvg,vicutp                # Kverneland UT1P board
               - prt,prtwd3                # Protonic WD3 board
               - wand,imx6qp-wandboard     # Wandboard i.MX6 QuadPlus Board
+              - ysoft,imx6qp-yapp4-crux-plus  # i.MX6 Quad Plus Y Soft IOTA Crux+ board
               - zii,imx6qp-zii-rdu2       # ZII RDU2+ Board
           - const: fsl,imx6qp
 
@@ -344,6 +360,13 @@ properties:
           - const: phytec,imx6qdl-pcm058  # PHYTEC phyCORE-i.MX6
           - const: fsl,imx6qp
 
+      - description: TQ-Systems TQMa6QP SoM on MBa6x
+        items:
+          - const: tq,imx6qp-mba6x-b
+          - const: tq,mba6b               # Expected by bootloader, to be removed in the future
+          - const: tq,imx6qp-tqma6qp-b
+          - const: fsl,imx6qp
+
       - description: i.MX6DL based Boards
         items:
           - enum:
@@ -482,6 +505,20 @@ properties:
           - const: dh,imx6s-dhcom-som
           - const: fsl,imx6dl
 
+      - description: TQ-Systems TQMa6DL SoM (variant A) on MBa6x
+        items:
+          - const: tq,imx6dl-mba6x-a
+          - const: tq,mba6a               # Expected by bootloader, to be removed in the future
+          - const: tq,imx6dl-tqma6dl-a
+          - const: fsl,imx6dl
+
+      - description: TQ-Systems TQMa6DL SoM (variant B) on MBa6x
+        items:
+          - const: tq,imx6dl-mba6x-b
+          - const: tq,mba6b               # Expected by bootloader, to be removed in the future
+          - const: tq,imx6dl-tqma6dl-b
+          - const: fsl,imx6dl
+
       - description: i.MX6SL based Boards
         items:
           - enum:
@@ -580,6 +617,7 @@ properties:
         items:
           - enum:
               - fsl,imx6ull-14x14-evk     # i.MX6 UltraLiteLite 14x14 EVK Board
+              - joz,jozacp                # JOZ Access Point
               - kontron,imx6ull-n6411-som # Kontron N6411 SOM
               - myir,imx6ull-mys-6ulx-eval # MYiR Tech iMX6ULL Evaluation Board
               - toradex,colibri-imx6ull      # Colibri iMX6ULL Modules
@@ -632,6 +670,7 @@ properties:
       - description: i.MX6ULZ based Boards
         items:
           - enum:
+              - bsh,imx6ulz-bsh-smm-m2    # i.MX6 ULZ BSH SystemMaster
               - fsl,imx6ulz-14x14-evk     # i.MX6 ULZ 14x14 EVK Board
           - const: fsl,imx6ull # This seems odd. Should be last?
           - const: fsl,imx6ulz
@@ -754,10 +793,23 @@ properties:
           - const: variscite,var-som-mx8mm
           - const: fsl,imx8mm
 
+      - description:
+          TQMa8MxML is a series of SOM featuring NXP i.MX8MM system-on-chip
+          variants. It is designed to be soldered on different carrier boards.
+          All variants (TQMa8M[Q,D,S][L]ML) use the same device tree, hence only
+          one compatible is needed.
+        items:
+          - enum:
+              - tq,imx8mm-tqma8mqml-mba8mx # TQ-Systems GmbH i.MX8MM TQMa8MQML SOM on MBa8Mx
+          - const: tq,imx8mm-tqma8mqml     # TQ-Systems GmbH i.MX8MM TQMa8MQML SOM
+          - const: fsl,imx8mm
+
       - description: i.MX8MN based Boards
         items:
           - enum:
               - beacon,imx8mn-beacon-kit  # i.MX8MN Beacon Development Kit
+              - bsh,imx8mn-bsh-smm-s2     # i.MX8MN BSH SystemMaster S2
+              - bsh,imx8mn-bsh-smm-s2pro  # i.MX8MN BSH SystemMaster S2 PRO
               - fsl,imx8mn-ddr4-evk       # i.MX8MN DDR4 EVK Board
               - fsl,imx8mn-evk            # i.MX8MN LPDDR4 EVK Board
               - gw,imx8mn-gw7902          # i.MX8MM Gateworks Board
@@ -769,6 +821,17 @@ properties:
           - const: variscite,var-som-mx8mn
           - const: fsl,imx8mn
 
+      - description:
+          TQMa8MxNL is a series of SOM featuring NXP i.MX8MN system-on-chip
+          variants. It is designed to be soldered on different carrier boards.
+          All variants (TQMa8M[Q,D,S][L]NL) use the same device tree, hence only
+          one compatible is needed.
+        items:
+          - enum:
+              - tq,imx8mn-tqma8mqnl-mba8mx # TQ-Systems GmbH i.MX8MN TQMa8MQNL SOM on MBa8Mx
+          - const: tq,imx8mn-tqma8mqnl     # TQ-Systems GmbH i.MX8MN TQMa8MQNL SOM
+          - const: fsl,imx8mn
+
       - description: i.MX8MP based Boards
         items:
           - enum:
@@ -805,6 +868,15 @@ properties:
           - const: purism,librem5
           - const: fsl,imx8mq
 
+      - description:
+          TQMa8Mx is a series of SOM featuring NXP i.MX8MQ system-on-chip
+          variants. It is designed to be clicked on different carrier boards.
+        items:
+          - enum:
+              - tq,imx8mq-tqma8mq-mba8mx # TQ-Systems GmbH i.MX8MQ TQMa8Mx SOM on MBa8Mx
+          - const: tq,imx8mq-tqma8mq     # TQ-Systems GmbH i.MX8MQ TQMa8Mx SOM
+          - const: fsl,imx8mq
+
       - description: Zodiac Inflight Innovations Ultra Boards
         items:
           - enum:
@@ -834,6 +906,12 @@ properties:
           - const: toradex,colibri-imx8x
           - const: fsl,imx8qxp
 
+      - description: i.MX8ULP based Boards
+        items:
+          - enum:
+              - fsl,imx8ulp-evk           # i.MX8ULP EVK Board
+          - const: fsl,imx8ulp
+
       - description:
           Freescale Vybrid Platform Device Tree Bindings
 
diff --git a/dts/Bindings/arm/mediatek.yaml b/dts/Bindings/arm/mediatek.yaml
index 0fa55497b9..0ffe1acf13 100644
--- a/dts/Bindings/arm/mediatek.yaml
+++ b/dts/Bindings/arm/mediatek.yaml
@@ -79,6 +79,14 @@ properties:
           - const: mediatek,mt7629
       - items:
           - enum:
+              - mediatek,mt7986a-rfb
+          - const: mediatek,mt7986a
+      - items:
+          - enum:
+              - mediatek,mt7986b-rfb
+          - const: mediatek,mt7986b
+      - items:
+          - enum:
               - mediatek,mt8127-moose
           - const: mediatek,mt8127
       - items:
@@ -134,6 +142,10 @@ properties:
               - google,krane-sku176
           - const: google,krane
           - const: mediatek,mt8183
+      - description: Google Cozmo (Acer Chromebook 314)
+        items:
+          - const: google,cozmo
+          - const: mediatek,mt8183
       - description: Google Damu (ASUS Chromebook Flip CM3)
         items:
           - const: google,damu
@@ -143,7 +155,9 @@ properties:
           - enum:
               - google,fennel-sku0
               - google,fennel-sku1
+              - google,fennel-sku2
               - google,fennel-sku6
+              - google,fennel-sku7
           - const: google,fennel
           - const: mediatek,mt8183
       - description: Google Juniper (Acer Chromebook Spin 311) / Kenzo (Acer Chromebook 311)
@@ -159,6 +173,12 @@ properties:
           - const: google,kakadu-rev2
           - const: google,kakadu
           - const: mediatek,mt8183
+      - description: Google Kakadu (ASUS Chromebook Detachable CM3)
+        items:
+          - const: google,kakadu-rev3-sku22
+          - const: google,kakadu-rev2-sku22
+          - const: google,kakadu
+          - const: mediatek,mt8183
       - description: Google Kappa (HP Chromebook 11a)
         items:
           - const: google,kappa
diff --git a/dts/Bindings/arm/mediatek/mediatek,apmixedsys.txt b/dts/Bindings/arm/mediatek/mediatek,apmixedsys.txt
index ea827e8763..3fa7558665 100644
--- a/dts/Bindings/arm/mediatek/mediatek,apmixedsys.txt
+++ b/dts/Bindings/arm/mediatek/mediatek,apmixedsys.txt
@@ -14,6 +14,7 @@ Required Properties:
 	- "mediatek,mt7622-apmixedsys"
 	- "mediatek,mt7623-apmixedsys", "mediatek,mt2701-apmixedsys"
 	- "mediatek,mt7629-apmixedsys"
+	- "mediatek,mt7986-apmixedsys"
 	- "mediatek,mt8135-apmixedsys"
 	- "mediatek,mt8167-apmixedsys", "syscon"
 	- "mediatek,mt8173-apmixedsys"
diff --git a/dts/Bindings/arm/mediatek/mediatek,ethsys.txt b/dts/Bindings/arm/mediatek/mediatek,ethsys.txt
index 6b7e8067e7..0502db7368 100644
--- a/dts/Bindings/arm/mediatek/mediatek,ethsys.txt
+++ b/dts/Bindings/arm/mediatek/mediatek,ethsys.txt
@@ -10,6 +10,7 @@ Required Properties:
 	- "mediatek,mt7622-ethsys", "syscon"
 	- "mediatek,mt7623-ethsys", "mediatek,mt2701-ethsys", "syscon"
 	- "mediatek,mt7629-ethsys", "syscon"
+	- "mediatek,mt7986-ethsys", "syscon"
 - #clock-cells: Must be 1
 - #reset-cells: Must be 1
 
diff --git a/dts/Bindings/arm/mediatek/mediatek,infracfg.txt b/dts/Bindings/arm/mediatek/mediatek,infracfg.txt
index eb3523c7a7..f66bd72057 100644
--- a/dts/Bindings/arm/mediatek/mediatek,infracfg.txt
+++ b/dts/Bindings/arm/mediatek/mediatek,infracfg.txt
@@ -15,6 +15,7 @@ Required Properties:
 	- "mediatek,mt7622-infracfg", "syscon"
 	- "mediatek,mt7623-infracfg", "mediatek,mt2701-infracfg", "syscon"
 	- "mediatek,mt7629-infracfg", "syscon"
+	- "mediatek,mt7986-infracfg", "syscon"
 	- "mediatek,mt8135-infracfg", "syscon"
 	- "mediatek,mt8167-infracfg", "syscon"
 	- "mediatek,mt8173-infracfg", "syscon"
diff --git a/dts/Bindings/arm/mediatek/mediatek,sgmiisys.txt b/dts/Bindings/arm/mediatek/mediatek,sgmiisys.txt
index 30cb645c0e..29ca7a10b3 100644
--- a/dts/Bindings/arm/mediatek/mediatek,sgmiisys.txt
+++ b/dts/Bindings/arm/mediatek/mediatek,sgmiisys.txt
@@ -8,6 +8,8 @@ Required Properties:
 - compatible: Should be:
 	- "mediatek,mt7622-sgmiisys", "syscon"
 	- "mediatek,mt7629-sgmiisys", "syscon"
+	- "mediatek,mt7986-sgmiisys_0", "syscon"
+	- "mediatek,mt7986-sgmiisys_1", "syscon"
 - #clock-cells: Must be 1
 
 The SGMIISYS controller uses the common clk binding from
diff --git a/dts/Bindings/arm/mediatek/mediatek,topckgen.txt b/dts/Bindings/arm/mediatek/mediatek,topckgen.txt
index 5ce7578cf2..b82422bb71 100644
--- a/dts/Bindings/arm/mediatek/mediatek,topckgen.txt
+++ b/dts/Bindings/arm/mediatek/mediatek,topckgen.txt
@@ -14,6 +14,7 @@ Required Properties:
 	- "mediatek,mt7622-topckgen"
 	- "mediatek,mt7623-topckgen", "mediatek,mt2701-topckgen"
 	- "mediatek,mt7629-topckgen"
+	- "mediatek,mt7986-topckgen", "syscon"
 	- "mediatek,mt8135-topckgen"
 	- "mediatek,mt8167-topckgen", "syscon"
 	- "mediatek,mt8173-topckgen"
diff --git a/dts/Bindings/arm/msm/qcom,llcc.yaml b/dts/Bindings/arm/msm/qcom,llcc.yaml
index 62fcbd8833..03882aac8d 100644
--- a/dts/Bindings/arm/msm/qcom,llcc.yaml
+++ b/dts/Bindings/arm/msm/qcom,llcc.yaml
@@ -24,6 +24,7 @@ properties:
       - qcom,sc7180-llcc
       - qcom,sc7280-llcc
       - qcom,sdm845-llcc
+      - qcom,sm6350-llcc
       - qcom,sm8150-llcc
       - qcom,sm8250-llcc
 
@@ -44,7 +45,6 @@ required:
   - compatible
   - reg
   - reg-names
-  - interrupts
 
 additionalProperties: false
 
diff --git a/dts/Bindings/arm/pmu.yaml b/dts/Bindings/arm/pmu.yaml
index e17ac049e8..981bac4516 100644
--- a/dts/Bindings/arm/pmu.yaml
+++ b/dts/Bindings/arm/pmu.yaml
@@ -44,10 +44,18 @@ properties:
           - arm,cortex-a76-pmu
           - arm,cortex-a77-pmu
           - arm,cortex-a78-pmu
+          - arm,cortex-a510-pmu
+          - arm,cortex-a710-pmu
+          - arm,cortex-x1-pmu
+          - arm,cortex-x2-pmu
           - arm,neoverse-e1-pmu
           - arm,neoverse-n1-pmu
+          - arm,neoverse-n2-pmu
+          - arm,neoverse-v1-pmu
           - brcm,vulcan-pmu
           - cavium,thunder-pmu
+          - nvidia,denver-pmu
+          - nvidia,carmel-pmu
           - qcom,krait-pmu
           - qcom,scorpion-pmu
           - qcom,scorpion-mp-pmu
diff --git a/dts/Bindings/arm/qcom.yaml b/dts/Bindings/arm/qcom.yaml
index c8808e0f9e..370aab274c 100644
--- a/dts/Bindings/arm/qcom.yaml
+++ b/dts/Bindings/arm/qcom.yaml
@@ -48,8 +48,10 @@ description: |
         sdx65
         sm7225
         sm8150
+        sdx65
         sm8250
         sm8350
+        sm8450
 
   The 'board' element must be one of the following strings:
 
@@ -201,8 +203,10 @@ properties:
 
       - items:
           - enum:
+              - qcom,sc7280-crd
               - qcom,sc7280-idp
               - qcom,sc7280-idp2
+              - google,hoglin
               - google,piglin
               - google,senor
           - const: qcom,sc7280
@@ -226,6 +230,11 @@ properties:
 
       - items:
           - enum:
+              - qcom,sdx65-mtp
+          - const: qcom,sdx65
+
+      - items:
+          - enum:
               - qcom,ipq6018-cp01
               - qcom,ipq6018-cp01-c1
           - const: qcom,ipq6018
@@ -257,6 +266,11 @@ properties:
               - qcom,sm8350-mtp
           - const: qcom,sm8350
 
+      - items:
+          - enum:
+              - qcom,sm8450-qrd
+          - const: qcom,sm8450
+
 additionalProperties: true
 
 ...
diff --git a/dts/Bindings/arm/renesas.yaml b/dts/Bindings/arm/renesas.yaml
index 5172065078..6a9350ee69 100644
--- a/dts/Bindings/arm/renesas.yaml
+++ b/dts/Bindings/arm/renesas.yaml
@@ -315,6 +315,18 @@ properties:
           - const: renesas,falcon-cpu
           - const: renesas,r8a779a0
 
+      - description: R-Car S4-8 (R8A779F0)
+        items:
+          - enum:
+              - renesas,spider-cpu # Spider CPU board (RTP8A779F0ASKB0SC2S)
+          - const: renesas,r8a779f0
+
+      - items:
+          - enum:
+              - renesas,spider-breakout # Spider BreakOut board (RTP8A779F0ASKB0SB0S)
+          - const: renesas,spider-cpu
+          - const: renesas,r8a779f0
+
       - description: R-Car H3e (R8A779M0)
         items:
           - enum:
diff --git a/dts/Bindings/arm/samsung/samsung-boards.yaml b/dts/Bindings/arm/samsung/samsung-boards.yaml
index ef6dc14be4..052cd94113 100644
--- a/dts/Bindings/arm/samsung/samsung-boards.yaml
+++ b/dts/Bindings/arm/samsung/samsung-boards.yaml
@@ -199,6 +199,18 @@ properties:
               - samsung,exynos7-espresso        # Samsung Exynos7 Espresso
           - const: samsung,exynos7
 
+      - description: Exynos7885 based boards
+        items:
+          - enum:
+              - samsung,jackpotlte              # Samsung Galaxy A8 (2018)
+          - const: samsung,exynos7885
+
+      - description: Exynos850 based boards
+        items:
+          - enum:
+              - winlink,e850-96                 # WinLink E850-96
+          - const: samsung,exynos850
+
       - description: Exynos Auto v9 based boards
         items:
           - enum:
diff --git a/dts/Bindings/arm/stm32/stm32.yaml b/dts/Bindings/arm/stm32/stm32.yaml
index bcaf7be3ab..b07720ea96 100644
--- a/dts/Bindings/arm/stm32/stm32.yaml
+++ b/dts/Bindings/arm/stm32/stm32.yaml
@@ -77,6 +77,7 @@ properties:
         items:
           - enum:
               - engicam,icore-stm32mp1-ctouch2       # STM32MP1 Engicam i.Core STM32MP1 C.TOUCH 2.0
+              - engicam,icore-stm32mp1-ctouch2-of10  # STM32MP1 Engicam i.Core STM32MP1 C.TOUCH 2.0 10.1" OF
               - engicam,icore-stm32mp1-edimm2.2      # STM32MP1 Engicam i.Core STM32MP1 EDIMM2.2 Starter Kit
           - const: engicam,icore-stm32mp1            # STM32MP1 Engicam i.Core STM32MP1 SoM
           - const: st,stm32mp157
diff --git a/dts/Bindings/arm/sunxi.yaml b/dts/Bindings/arm/sunxi.yaml
index 889128acf4..c8a3102c0f 100644
--- a/dts/Bindings/arm/sunxi.yaml
+++ b/dts/Bindings/arm/sunxi.yaml
@@ -808,6 +808,11 @@ properties:
           - const: oranth,tanix-tx6
           - const: allwinner,sun50i-h6
 
+      - description: Tanix TX6 mini
+        items:
+          - const: oranth,tanix-tx6-mini
+          - const: allwinner,sun50i-h6
+
       - description: TBS A711 Tablet
         items:
           - const: tbs-biometrics,a711
diff --git a/dts/Bindings/arm/sunxi/allwinner,sun4i-a10-mbus.yaml b/dts/Bindings/arm/sunxi/allwinner,sun4i-a10-mbus.yaml
index 29c9961ee2..8eee312c2e 100644
--- a/dts/Bindings/arm/sunxi/allwinner,sun4i-a10-mbus.yaml
+++ b/dts/Bindings/arm/sunxi/allwinner,sun4i-a10-mbus.yaml
@@ -32,12 +32,38 @@ properties:
       - allwinner,sun8i-h3-mbus
       - allwinner,sun8i-r40-mbus
       - allwinner,sun50i-a64-mbus
+      - allwinner,sun50i-h5-mbus
 
   reg:
-    maxItems: 1
+    minItems: 1
+    items:
+      - description: MBUS interconnect/bandwidth limit/PMU registers
+      - description: DRAM controller/PHY registers
+
+  reg-names:
+    minItems: 1
+    items:
+      - const: mbus
+      - const: dram
 
   clocks:
+    minItems: 1
+    items:
+      - description: MBUS interconnect module clock
+      - description: DRAM controller/PHY module clock
+      - description: Register bus clock, shared by MBUS and DRAM
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: mbus
+      - const: dram
+      - const: bus
+
+  interrupts:
     maxItems: 1
+    description:
+      MBUS PMU activity interrupt.
 
   dma-ranges:
     description:
@@ -54,13 +80,55 @@ required:
   - clocks
   - dma-ranges
 
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - allwinner,sun8i-h3-mbus
+          - allwinner,sun50i-a64-mbus
+          - allwinner,sun50i-h5-mbus
+
+then:
+  properties:
+    reg:
+      minItems: 2
+
+    reg-names:
+      minItems: 2
+
+    clocks:
+      minItems: 3
+
+    clock-names:
+      minItems: 3
+
+  required:
+    - reg-names
+    - clock-names
+
+else:
+  properties:
+    reg:
+      maxItems: 1
+
+    reg-names:
+      maxItems: 1
+
+    clocks:
+      maxItems: 1
+
+    clock-names:
+      maxItems: 1
+
 additionalProperties: false
 
 examples:
   - |
-    #include <dt-bindings/clock/sun5i-ccu.h>
+    #include <dt-bindings/clock/sun50i-a64-ccu.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
 
-    mbus: dram-controller@1c01000 {
+    dram-controller@1c01000 {
         compatible = "allwinner,sun5i-a13-mbus";
         reg = <0x01c01000 0x1000>;
         clocks = <&ccu CLK_MBUS>;
@@ -70,4 +138,21 @@ examples:
         #interconnect-cells = <1>;
     };
 
+  - |
+    dram-controller@1c62000 {
+        compatible = "allwinner,sun50i-a64-mbus";
+        reg = <0x01c62000 0x1000>,
+              <0x01c63000 0x1000>;
+        reg-names = "mbus", "dram";
+        clocks = <&ccu CLK_MBUS>,
+                 <&ccu CLK_DRAM>,
+                 <&ccu CLK_BUS_DRAM>;
+        clock-names = "mbus", "dram", "bus";
+        interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        dma-ranges = <0x00000000 0x40000000 0xc0000000>;
+        #interconnect-cells = <1>;
+    };
+
 ...
diff --git a/dts/Bindings/arm/tegra.yaml b/dts/Bindings/arm/tegra.yaml
index d79d36ac0c..49841ca272 100644
--- a/dts/Bindings/arm/tegra.yaml
+++ b/dts/Bindings/arm/tegra.yaml
@@ -37,6 +37,9 @@ properties:
           - const: toradex,colibri_t20
           - const: nvidia,tegra20
       - items:
+          - const: asus,tf101
+          - const: nvidia,tegra20
+      - items:
           - const: acer,picasso
           - const: nvidia,tegra20
       - items:
@@ -50,6 +53,18 @@ properties:
           - const: nvidia,cardhu
           - const: nvidia,tegra30
       - items:
+          - const: asus,tf201
+          - const: nvidia,tegra30
+      - items:
+          - const: asus,tf300t
+          - const: nvidia,tegra30
+      - items:
+          - const: asus,tf300tg
+          - const: nvidia,tegra30
+      - items:
+          - const: asus,tf700t
+          - const: nvidia,tegra30
+      - items:
           - const: toradex,apalis_t30-eval
           - const: toradex,apalis_t30
           - const: nvidia,tegra30
@@ -75,7 +90,11 @@ properties:
           - const: ouya,ouya
           - const: nvidia,tegra30
       - items:
+          - const: pegatron,chagall
+          - const: nvidia,tegra30
+      - items:
           - enum:
+              - asus,tf701t
               - nvidia,dalmore
               - nvidia,roth
               - nvidia,tn7
@@ -108,14 +127,17 @@ properties:
               - nvidia,p2571
               - nvidia,p2894-0050-a08
           - const: nvidia,tegra210
-      - items:
-          - enum:
-              - nvidia,p2771-0000
-              - nvidia,p3509-0000+p3636-0001
+      - description: Jetson TX2 Developer Kit
+        items:
+          - const: nvidia,p2771-0000
           - const: nvidia,tegra186
-      - items:
-          - enum:
-              - nvidia,p2972-0000
+      - description: Jetson TX2 NX Developer Kit
+        items:
+          - const: nvidia,p3509-0000+p3636-0001
+          - const: nvidia,tegra186
+      - description: Jetson AGX Xavier Developer Kit
+        items:
+          - const: nvidia,p2972-0000
           - const: nvidia,tegra194
       - description: Jetson Xavier NX
         items:
@@ -134,8 +156,16 @@ properties:
           - const: nvidia,p3509-0000+p3668-0001
           - const: nvidia,tegra194
       - items:
-          - enum:
-              - nvidia,tegra234-vdk
+          - const: nvidia,tegra234-vdk
+          - const: nvidia,tegra234
+      - description: Jetson AGX Orin
+        items:
+          - const: nvidia,p3701-0000
+          - const: nvidia,tegra234
+      - description: Jetson AGX Orin Developer Kit
+        items:
+          - const: nvidia,p3737-0000+p3701-0000
+          - const: nvidia,p3701-0000
           - const: nvidia,tegra234
 
 additionalProperties: true
diff --git a/dts/Bindings/arm/tegra/nvidia,tegra186-pmc.txt b/dts/Bindings/arm/tegra/nvidia,tegra186-pmc.txt
deleted file mode 100644
index 576462fae2..0000000000
--- a/dts/Bindings/arm/tegra/nvidia,tegra186-pmc.txt
+++ /dev/null
@@ -1,133 +0,0 @@
-NVIDIA Tegra Power Management Controller (PMC)
-
-Required properties:
-- compatible: Should contain one of the following:
-  - "nvidia,tegra186-pmc": for Tegra186
-  - "nvidia,tegra194-pmc": for Tegra194
-  - "nvidia,tegra234-pmc": for Tegra234
-- reg: Must contain an (offset, length) pair of the register set for each
-  entry in reg-names.
-- reg-names: Must include the following entries:
-  - "pmc"
-  - "wake"
-  - "aotag"
-  - "scratch"
-  - "misc" (Only for Tegra194 and later)
-
-Optional properties:
-- nvidia,invert-interrupt: If present, inverts the PMU interrupt signal.
-- interrupt-controller: Identifies the node as an interrupt controller.
-- #interrupt-cells: Specifies the number of cells needed to encode an
-  interrupt source. The value must be 2.
-
-Example:
-
-SoC DTSI:
-
-	pmc@c3600000 {
-		compatible = "nvidia,tegra186-pmc";
-		reg = <0 0x0c360000 0 0x10000>,
-		      <0 0x0c370000 0 0x10000>,
-		      <0 0x0c380000 0 0x10000>,
-		      <0 0x0c390000 0 0x10000>;
-		reg-names = "pmc", "wake", "aotag", "scratch";
-	};
-
-Board DTS:
-
-	pmc@c360000 {
-		nvidia,invert-interrupt;
-	};
-
-== Pad Control ==
-
-On Tegra SoCs a pad is a set of pins which are configured as a group.
-The pin grouping is a fixed attribute of the hardware. The PMC can be
-used to set pad power state and signaling voltage. A pad can be either
-in active or power down mode. The support for power state and signaling
-voltage configuration varies depending on the pad in question. 3.3 V and
-1.8 V signaling voltages are supported on pins where software
-controllable signaling voltage switching is available.
-
-Pad configurations are described with pin configuration nodes which
-are placed under the pmc node and they are referred to by the pinctrl
-client properties. For more information see
-Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt.
-
-The following pads are present on Tegra186:
-csia		csib		dsi		mipi-bias
-pex-clk-bias	pex-clk3	pex-clk2	pex-clk1
-usb0		usb1		usb2		usb-bias
-uart		audio		hsic		dbg
-hdmi-dp0	hdmi-dp1	pex-cntrl	sdmmc2-hv
-sdmmc4		cam		dsib		dsic
-dsid		csic		csid		csie
-dsif		spi		ufs		dmic-hv
-edp		sdmmc1-hv	sdmmc3-hv	conn
-audio-hv	ao-hv
-
-Required pin configuration properties:
-  - pins: A list of strings, each of which contains the name of a pad
-	  to be configured.
-
-Optional pin configuration properties:
-  - low-power-enable: Configure the pad into power down mode
-  - low-power-disable: Configure the pad into active mode
-  - power-source: Must contain either TEGRA_IO_PAD_VOLTAGE_1V8 or
-    TEGRA_IO_PAD_VOLTAGE_3V3 to select between signaling voltages.
-    The values are defined in
-    include/dt-bindings/pinctrl/pinctrl-tegra-io-pad.h.
-
-Note: The power state can be configured on all of the above pads except
-      for ao-hv. Following pads have software configurable signaling
-      voltages: sdmmc2-hv, dmic-hv, sdmmc1-hv, sdmmc3-hv, audio-hv,
-      ao-hv.
-
-Pad configuration state example:
-	pmc: pmc@7000e400 {
-		compatible = "nvidia,tegra186-pmc";
-		reg = <0 0x0c360000 0 0x10000>,
-		      <0 0x0c370000 0 0x10000>,
-		      <0 0x0c380000 0 0x10000>,
-		      <0 0x0c390000 0 0x10000>;
-		reg-names = "pmc", "wake", "aotag", "scratch";
-
-		...
-
-		sdmmc1_3v3: sdmmc1-3v3 {
-			pins = "sdmmc1-hv";
-			power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>;
-		};
-
-		sdmmc1_1v8: sdmmc1-1v8 {
-			pins = "sdmmc1-hv";
-			power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>;
-		};
-
-		hdmi_off: hdmi-off {
-			pins = "hdmi";
-			low-power-enable;
-		}
-
-		hdmi_on: hdmi-on {
-			pins = "hdmi";
-			low-power-disable;
-		}
-	};
-
-Pinctrl client example:
-	sdmmc1: sdhci@3400000 {
-		...
-		pinctrl-names = "sdmmc-3v3", "sdmmc-1v8";
-		pinctrl-0 = <&sdmmc1_3v3>;
-		pinctrl-1 = <&sdmmc1_1v8>;
-	};
-
-	...
-
-	sor0: sor@15540000 {
-		...
-		pinctrl-0 = <&hdmi_off>;
-		pinctrl-1 = <&hdmi_on>;
-		pinctrl-names = "hdmi-on", "hdmi-off";
-	};
diff --git a/dts/Bindings/arm/tegra/nvidia,tegra186-pmc.yaml b/dts/Bindings/arm/tegra/nvidia,tegra186-pmc.yaml
new file mode 100644
index 0000000000..0faa403f68
--- /dev/null
+++ b/dts/Bindings/arm/tegra/nvidia,tegra186-pmc.yaml
@@ -0,0 +1,198 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/tegra/nvidia,tegra186-pmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra Power Management Controller (PMC)
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  compatible:
+    enum:
+      - nvidia,tegra186-pmc
+      - nvidia,tegra194-pmc
+      - nvidia,tegra234-pmc
+
+  reg:
+    minItems: 4
+    maxItems: 5
+
+  reg-names:
+    minItems: 4
+    items:
+      - const: pmc
+      - const: wake
+      - const: aotag
+      - const: scratch
+      - const: misc
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    description: Specifies the number of cells needed to encode an
+      interrupt source. The value must be 2.
+    const: 2
+
+  nvidia,invert-interrupt:
+    description: If present, inverts the PMU interrupt signal.
+    $ref: /schemas/types.yaml#/definitions/flag
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: nvidia,tegra186-pmc
+then:
+  properties:
+    reg:
+      maxItems: 4
+
+    reg-names:
+      maxItems: 4
+else:
+  properties:
+    reg:
+      minItems: 5
+
+    reg-names:
+      minItems: 5
+
+patternProperties:
+  "^[a-z0-9]+-[a-z0-9]+$":
+    if:
+      type: object
+    then:
+      description: |
+        These are pad configuration nodes. On Tegra SoCs a pad is a set of
+        pins which are configured as a group. The pin grouping is a fixed
+        attribute of the hardware. The PMC can be used to set pad power
+        state and signaling voltage. A pad can be either in active or
+        power down mode. The support for power state and signaling voltage
+        configuration varies depending on the pad in question. 3.3 V and
+        1.8 V signaling voltages are supported on pins where software
+        controllable signaling voltage switching is available.
+
+        Pad configurations are described with pin configuration nodes
+        which are placed under the pmc node and they are referred to by
+        the pinctrl client properties. For more information see
+
+          Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
+
+        The following pads are present on Tegra186:
+
+          csia, csib, dsi, mipi-bias, pex-clk-bias, pex-clk3, pex-clk2,
+          pex-clk1, usb0, usb1, usb2, usb-bias, uart, audio, hsic, dbg,
+          hdmi-dp0, hdmi-dp1, pex-cntrl, sdmmc2-hv, sdmmc4, cam, dsib,
+          dsic, dsid, csic, csid, csie, dsif, spi, ufs, dmic-hv, edp,
+          sdmmc1-hv, sdmmc3-hv, conn, audio-hv, ao-hv
+
+        The following pads are present on Tegra194:
+
+          csia, csib, mipi-bias, pex-clk-bias, pex-clk3, pex-clk2,
+          pex-clk1, eqos, pex-clk-2-bias, pex-clk-2, dap3, dap5, uart,
+          pwr-ctl, soc-gpio53, audio, gp-pwm2, gp-pwm3, soc-gpio12,
+          soc-gpio13, soc-gpio10, uart4, uart5, dbg, hdmi-dp3, hdmi-dp2,
+          hdmi-dp0, hdmi-dp1, pex-cntrl, pex-ctl2, pex-l0-rst,
+          pex-l1-rst, sdmmc4, pex-l5-rst, cam, csic, csid, csie, csif,
+          spi, ufs, csig, csih, edp, sdmmc1-hv, sdmmc3-hv, conn,
+          audio-hv, ao-hv
+
+      properties:
+        pins:
+          $ref: /schemas/types.yaml#/definitions/string
+          description: Must contain the name of the pad(s) to be
+            configured.
+
+        low-power-enable:
+          description: Configure the pad into power down mode.
+          $ref: /schemas/types.yaml#/definitions/flag
+
+        low-power-disable:
+          description: Configure the pad into active mode.
+          $ref: /schemas/types.yaml#/definitions/flag
+
+        power-source:
+          $ref: /schemas/types.yaml#/definitions/uint32
+          description: |
+            Must contain either TEGRA_IO_PAD_VOLTAGE_1V8 or
+            TEGRA_IO_PAD_VOLTAGE_3V3 to select between signalling
+            voltages.
+
+            The values are defined in
+
+              include/dt-bindings/pinctrl/pinctrl-tegra-io-pad.h
+
+            The power state can be configured on all of the above pads
+            except for ao-hv. Following pads have software configurable
+            signaling voltages: sdmmc2-hv, dmic-hv, sdmmc1-hv, sdmmc3-hv,
+            audio-hv, ao-hv.
+
+        phandle: true
+
+      required:
+        - pins
+
+      additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - reg-names
+
+additionalProperties: false
+
+dependencies:
+  interrupt-controller: ['#interrupt-cells']
+  "#interrupt-cells":
+    required:
+      - interrupt-controller
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra186-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/pinctrl/pinctrl-tegra-io-pad.h>
+    #include <dt-bindings/memory/tegra186-mc.h>
+    #include <dt-bindings/reset/tegra186-reset.h>
+
+    pmc@c3600000 {
+        compatible = "nvidia,tegra186-pmc";
+        reg = <0x0c360000 0x10000>,
+              <0x0c370000 0x10000>,
+              <0x0c380000 0x10000>,
+              <0x0c390000 0x10000>;
+        reg-names = "pmc", "wake", "aotag", "scratch";
+        nvidia,invert-interrupt;
+
+        sdmmc1_3v3: sdmmc1-3v3 {
+            pins = "sdmmc1-hv";
+            power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>;
+        };
+
+        sdmmc1_1v8: sdmmc1-1v8 {
+            pins = "sdmmc1-hv";
+            power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>;
+        };
+    };
+
+    sdmmc1: mmc@3400000 {
+        compatible = "nvidia,tegra186-sdhci";
+        reg = <0x03400000 0x10000>;
+        interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&bpmp TEGRA186_CLK_SDMMC1>,
+                 <&bpmp TEGRA186_CLK_SDMMC_LEGACY_TM>;
+        clock-names = "sdhci", "tmclk";
+        resets = <&bpmp TEGRA186_RESET_SDMMC1>;
+        reset-names = "sdhci";
+        interconnects = <&mc TEGRA186_MEMORY_CLIENT_SDMMCRA &emc>,
+                        <&mc TEGRA186_MEMORY_CLIENT_SDMMCWA &emc>;
+        interconnect-names = "dma-mem", "write";
+        iommus = <&smmu TEGRA186_SID_SDMMC1>;
+        pinctrl-names = "sdmmc-3v3", "sdmmc-1v8";
+        pinctrl-0 = <&sdmmc1_3v3>;
+        pinctrl-1 = <&sdmmc1_1v8>;
+    };
diff --git a/dts/Bindings/arm/ti/k3.yaml b/dts/Bindings/arm/ti/k3.yaml
index cf327230fc..b03c10fa2e 100644
--- a/dts/Bindings/arm/ti/k3.yaml
+++ b/dts/Bindings/arm/ti/k3.yaml
@@ -53,6 +53,12 @@ properties:
               - ti,am642-sk
           - const: ti,am642
 
+      - description: K3 J721s2 SoC
+        items:
+          - enum:
+              - ti,j721s2-evm
+          - const: ti,j721s2
+
 additionalProperties: true
 
 ...
diff --git a/dts/Bindings/arm/ux500.yaml b/dts/Bindings/arm/ux500.yaml
index 5db7cfba81..a46193ad94 100644
--- a/dts/Bindings/arm/ux500.yaml
+++ b/dts/Bindings/arm/ux500.yaml
@@ -20,6 +20,11 @@ properties:
           - const: st-ericsson,mop500
           - const: st-ericsson,u8500
 
+      - description: ST-Ericsson HREF520
+        items:
+          - const: st-ericsson,href520
+          - const: st-ericsson,u8500
+
       - description: ST-Ericsson HREF (v60+)
         items:
           - const: st-ericsson,hrefv60+
@@ -30,9 +35,34 @@ properties:
           - const: calaosystems,snowball-a9500
           - const: st-ericsson,u9500
 
+      - description: Samsung Galaxy Ace 2 (GT-I8160)
+        items:
+          - const: samsung,codina
+          - const: st-ericsson,u8500
+
+      - description: Samsung Galaxy Beam (GT-I8530)
+        items:
+          - const: samsung,gavini
+          - const: st-ericsson,u8500
+
       - description: Samsung Galaxy S III mini (GT-I8190)
         items:
           - const: samsung,golden
           - const: st-ericsson,u8500
 
+      - description: Samsung Galaxy S Advance (GT-I9070)
+        items:
+          - const: samsung,janice
+          - const: st-ericsson,u8500
+
+      - description: Samsung Galaxy Amp (SGH-I407)
+        items:
+          - const: samsung,kyle
+          - const: st-ericsson,u8500
+
+      - description: Samsung Galaxy XCover 2 (GT-S7710)
+        items:
+          - const: samsung,skomer
+          - const: st-ericsson,u8500
+
 additionalProperties: true
diff --git a/dts/Bindings/arm/xen.txt b/dts/Bindings/arm/xen.txt
index db5c56db30..61d77acbeb 100644
--- a/dts/Bindings/arm/xen.txt
+++ b/dts/Bindings/arm/xen.txt
@@ -7,15 +7,17 @@ the following properties:
 	compatible = "xen,xen-<version>", "xen,xen";
   where <version> is the version of the Xen ABI of the platform.
 
-- reg: specifies the base physical address and size of a region in
-  memory where the grant table should be mapped to, using an
-  HYPERVISOR_memory_op hypercall. The memory region is large enough to map
-  the whole grant table (it is larger or equal to gnttab_max_grant_frames()).
-  This property is unnecessary when booting Dom0 using ACPI.
+- reg: specifies the base physical address and size of the regions in memory
+  where the special resources should be mapped to, using an HYPERVISOR_memory_op
+  hypercall.
+  Region 0 is reserved for mapping grant table, it must be always present.
+  The memory region is large enough to map the whole grant table (it is larger
+  or equal to gnttab_max_grant_frames()).
+  Regions 1...N are extended regions (unused address space) for mapping foreign
+  GFNs and grants, they might be absent if there is nothing to expose.
 
 - interrupts: the interrupt used by Xen to inject event notifications.
   A GIC node is also required.
-  This property is unnecessary when booting Dom0 using ACPI.
 
 To support UEFI on Xen ARM virtual platforms, Xen populates the FDT "uefi" node
 under /hypervisor with following parameters:
diff --git a/dts/Bindings/ata/brcm,sata-brcm.txt b/dts/Bindings/ata/brcm,sata-brcm.txt
deleted file mode 100644
index b9ae4ce4a0..0000000000
--- a/dts/Bindings/ata/brcm,sata-brcm.txt
+++ /dev/null
@@ -1,45 +0,0 @@
-* Broadcom SATA3 AHCI Controller
-
-SATA nodes are defined to describe on-chip Serial ATA controllers.
-Each SATA controller should have its own node.
-
-Required properties:
-- compatible         : should be one or more of
-			"brcm,bcm7216-ahci"
-			"brcm,bcm7425-ahci"
-			"brcm,bcm7445-ahci"
-			"brcm,bcm-nsp-ahci"
-			"brcm,sata3-ahci"
-			"brcm,bcm63138-ahci"
-- reg                : register mappings for AHCI and SATA_TOP_CTRL
-- reg-names          : "ahci" and "top-ctrl"
-- interrupts         : interrupt mapping for SATA IRQ
-
-Optional properties:
-
-- reset: for "brcm,bcm7216-ahci" must be a valid reset phandle
-  pointing to the RESCAL reset controller provider node.
-- reset-names: for "brcm,bcm7216-ahci", must be "rescal".
-
-Also see ahci-platform.txt.
-
-Example:
-
-	sata@f045a000 {
-		compatible = "brcm,bcm7445-ahci", "brcm,sata3-ahci";
-		reg = <0xf045a000 0xa9c>, <0xf0458040 0x24>;
-		reg-names = "ahci", "top-ctrl";
-		interrupts = <0 30 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		sata0: sata-port@0 {
-			reg = <0>;
-			phys = <&sata_phy 0>;
-		};
-
-		sata1: sata-port@1 {
-			reg = <1>;
-			phys = <&sata_phy 1>;
-		};
-	};
diff --git a/dts/Bindings/ata/brcm,sata-brcm.yaml b/dts/Bindings/ata/brcm,sata-brcm.yaml
new file mode 100644
index 0000000000..235a93ac86
--- /dev/null
+++ b/dts/Bindings/ata/brcm,sata-brcm.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/brcm,sata-brcm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom SATA3 AHCI Controller
+
+description:
+  SATA nodes are defined to describe on-chip Serial ATA controllers.
+  Each SATA controller should have its own node.
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+allOf:
+  - $ref: sata-common.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - brcm,bcm7216-ahci
+              - brcm,bcm7445-ahci
+              - brcm,bcm7425-ahci
+              - brcm,bcm63138-ahci
+          - const: brcm,sata3-ahci
+      - items:
+          - const: brcm,bcm-nsp-ahci
+
+  reg:
+    minItems: 2
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: ahci
+      - const: top-ctrl
+
+  interrupts:
+    maxItems: 1
+
+  dma-coherent: true
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - brcm,bcm7216-ahci
+          - brcm,bcm63138-ahci
+then:
+  properties:
+    resets:
+      maxItems: 1
+    reset-names:
+      enum:
+        - rescal
+        - ahci
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#address-cells"
+  - "#size-cells"
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    sata@f045a000 {
+        compatible = "brcm,bcm7445-ahci", "brcm,sata3-ahci";
+        reg = <0xf045a000 0xa9c>, <0xf0458040 0x24>;
+        reg-names = "ahci", "top-ctrl";
+        interrupts = <0 30 0>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        sata0: sata-port@0 {
+            reg = <0>;
+            phys = <&sata_phy 0>;
+        };
+
+        sata1: sata-port@1 {
+            reg = <1>;
+            phys = <&sata_phy 1>;
+        };
+    };
diff --git a/dts/Bindings/bus/brcm,gisb-arb.txt b/dts/Bindings/bus/brcm,gisb-arb.txt
deleted file mode 100644
index 10f6d0a815..0000000000
--- a/dts/Bindings/bus/brcm,gisb-arb.txt
+++ /dev/null
@@ -1,34 +0,0 @@
-Broadcom GISB bus Arbiter controller
-
-Required properties:
-
-- compatible:
-    "brcm,bcm7278-gisb-arb" for V7 28nm chips
-    "brcm,gisb-arb" or "brcm,bcm7445-gisb-arb" for other 28nm chips
-    "brcm,bcm7435-gisb-arb" for newer 40nm chips
-    "brcm,bcm7400-gisb-arb" for older 40nm chips and all 65nm chips
-    "brcm,bcm7038-gisb-arb" for 130nm chips
-- reg: specifies the base physical address and size of the registers
-- interrupts: specifies the two interrupts (timeout and TEA) to be used from
-  the parent interrupt controller. A third optional interrupt may be specified
-  for breakpoints.
-
-Optional properties:
-
-- brcm,gisb-arb-master-mask: 32-bits wide bitmask used to specify which GISB
-  masters are valid at the system level
-- brcm,gisb-arb-master-names: string list of the litteral name of the GISB
-  masters. Should match the number of bits set in brcm,gisb-master-mask and
-  the order in which they appear
-
-Example:
-
-gisb-arb@f0400000 {
-	compatible = "brcm,gisb-arb";
-	reg = <0xf0400000 0x800>;
-	interrupts = <0>, <2>;
-	interrupt-parent = <&sun_l2_intc>;
-
-	brcm,gisb-arb-master-mask = <0x7>;
-	brcm,gisb-arb-master-names = "bsp_0", "scpu_0", "cpu_0";
-};
diff --git a/dts/Bindings/bus/brcm,gisb-arb.yaml b/dts/Bindings/bus/brcm,gisb-arb.yaml
new file mode 100644
index 0000000000..b23c300199
--- /dev/null
+++ b/dts/Bindings/bus/brcm,gisb-arb.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bus/brcm,gisb-arb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom GISB bus Arbiter controller
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - brcm,bcm7445-gisb-arb  # for other 28nm chips
+          - const: brcm,gisb-arb
+      - items:
+          - enum:
+              - brcm,bcm7278-gisb-arb  # for V7 28nm chips
+              - brcm,bcm7435-gisb-arb  # for newer 40nm chips
+              - brcm,bcm7400-gisb-arb  # for older 40nm chips and all 65nm chips
+              - brcm,bcm7038-gisb-arb  # for 130nm chips
+              - brcm,gisb-arb          # fallback compatible
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 2
+    items:
+      - description: timeout interrupt line
+      - description: target abort interrupt line
+      - description: breakpoint interrupt line
+
+  brcm,gisb-arb-master-mask:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: >
+      32-bits wide bitmask used to specify which GISB masters are valid at the
+      system level
+
+  brcm,gisb-arb-master-names:
+    $ref: /schemas/types.yaml#/definitions/string-array
+    description: >
+      String list of the litteral name of the GISB masters. Should match the
+      number of bits set in brcm,gisb-master-mask and the order in which they
+      appear from MSB to LSB.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    gisb-arb@f0400000 {
+      compatible = "brcm,gisb-arb";
+      reg = <0xf0400000 0x800>;
+      interrupts = <0>, <2>;
+      interrupt-parent = <&sun_l2_intc>;
+      brcm,gisb-arb-master-mask = <0x7>;
+      brcm,gisb-arb-master-names = "bsp_0", "scpu_0", "cpu_0";
+    };
diff --git a/dts/Bindings/bus/fsl,spba-bus.yaml b/dts/Bindings/bus/fsl,spba-bus.yaml
new file mode 100644
index 0000000000..d42dbb0bbc
--- /dev/null
+++ b/dts/Bindings/bus/fsl,spba-bus.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bus/fsl,spba-bus.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Shared Peripherals Bus Interface
+
+maintainers:
+  - Shawn Guo <shawnguo@kernel.org>
+
+description: |
+  A simple bus enabling access to shared peripherals.
+
+  The "spba-bus" follows the "simple-bus" set of properties, as
+  specified in the Devicetree Specification.  It is an extension of
+  "simple-bus" because the SDMA controller uses this compatible flag to
+  determine which peripherals are available to it and the range over which
+  the SDMA can access.  There are no special clocks for the bus, because
+  the SDMA controller itself has its interrupt and clock assignments.
+
+select:
+  properties:
+    compatible:
+      contains:
+        const: fsl,spba-bus
+  required:
+    - compatible
+
+properties:
+  $nodename:
+    pattern: "^spba-bus(@[0-9a-f]+)?$"
+
+  compatible:
+    items:
+      - const: fsl,spba-bus
+      - const: simple-bus
+
+  '#address-cells':
+    enum: [ 1, 2 ]
+
+  '#size-cells':
+    enum: [ 1, 2 ]
+
+  reg:
+    maxItems: 1
+
+  ranges: true
+
+required:
+  - compatible
+  - '#address-cells'
+  - '#size-cells'
+  - reg
+  - ranges
+
+additionalProperties:
+  type: object
+
+examples:
+  - |
+    spba-bus@30000000 {
+        compatible = "fsl,spba-bus", "simple-bus";
+        #address-cells = <1>;
+        #size-cells = <1>;
+        reg = <0x30000000 0x100000>;
+        ranges;
+    };
diff --git a/dts/Bindings/bus/imx-weim.txt b/dts/Bindings/bus/imx-weim.txt
index 1b1d1c5c21..e7f502070d 100644
--- a/dts/Bindings/bus/imx-weim.txt
+++ b/dts/Bindings/bus/imx-weim.txt
@@ -48,6 +48,11 @@ Optional properties:
 			devices, the presence of this property indicates that
 			the weim bus should operate in Burst Clock Mode.
 
+ - fsl,continuous-burst-clk	Make Burst Clock to output continuous clock.
+			Without this option Burst Clock will output clock
+			only when necessary. This takes effect only if
+			"fsl,burst-clk-enable" is set.
+
 Timing property for child nodes. It is mandatory, not optional.
 
  - fsl,weim-cs-timing:	The timing array, contains timing values for the
diff --git a/dts/Bindings/clock/allwinner,sun4i-a10-ccu.yaml b/dts/Bindings/clock/allwinner,sun4i-a10-ccu.yaml
index c4b7243ddc..15ed64d352 100644
--- a/dts/Bindings/clock/allwinner,sun4i-a10-ccu.yaml
+++ b/dts/Bindings/clock/allwinner,sun4i-a10-ccu.yaml
@@ -34,6 +34,8 @@ properties:
       - allwinner,sun8i-v3-ccu
       - allwinner,sun8i-v3s-ccu
       - allwinner,sun9i-a80-ccu
+      - allwinner,sun20i-d1-ccu
+      - allwinner,sun20i-d1-r-ccu
       - allwinner,sun50i-a64-ccu
       - allwinner,sun50i-a64-r-ccu
       - allwinner,sun50i-a100-ccu
@@ -79,6 +81,7 @@ if:
       enum:
         - allwinner,sun8i-a83t-r-ccu
         - allwinner,sun8i-h3-r-ccu
+        - allwinner,sun20i-d1-r-ccu
         - allwinner,sun50i-a64-r-ccu
         - allwinner,sun50i-a100-r-ccu
         - allwinner,sun50i-h6-r-ccu
@@ -99,6 +102,7 @@ else:
     properties:
       compatible:
         enum:
+          - allwinner,sun20i-d1-ccu
           - allwinner,sun50i-a100-ccu
           - allwinner,sun50i-h6-ccu
           - allwinner,sun50i-h616-ccu
diff --git a/dts/Bindings/clock/exynos5260-clock.txt b/dts/Bindings/clock/exynos5260-clock.txt
deleted file mode 100644
index c79d31f7f6..0000000000
--- a/dts/Bindings/clock/exynos5260-clock.txt
+++ /dev/null
@@ -1,190 +0,0 @@
-* Samsung Exynos5260 Clock Controller
-
-Exynos5260 has 13 clock controllers which are instantiated
-independently from the device-tree. These clock controllers
-generate and supply clocks to various hardware blocks within
-the SoC.
-
-Each clock is assigned an identifier and client nodes can use
-this identifier to specify the clock which they consume. All
-available clocks are defined as preprocessor macros in
-dt-bindings/clock/exynos5260-clk.h header and can be used in
-device tree sources.
-
-External clocks:
-
-There are several clocks that are generated outside the SoC. It
-is expected that they are defined using standard clock bindings
-with following clock-output-names:
-
- - "fin_pll" - PLL input clock from XXTI
- - "xrtcxti" - input clock from XRTCXTI
- - "ioclk_pcm_extclk" - pcm external operation clock
- - "ioclk_spdif_extclk" - spdif external operation clock
- - "ioclk_i2s_cdclk" - i2s0 codec clock
-
-Phy clocks:
-
-There are several clocks which are generated by specific PHYs.
-These clocks are fed into the clock controller and then routed to
-the hardware blocks. These clocks are defined as fixed clocks in the
-driver with following names:
-
- - "phyclk_dptx_phy_ch3_txd_clk" - dp phy clock for channel 3
- - "phyclk_dptx_phy_ch2_txd_clk" - dp phy clock for channel 2
- - "phyclk_dptx_phy_ch1_txd_clk" - dp phy clock for channel 1
- - "phyclk_dptx_phy_ch0_txd_clk" - dp phy clock for channel 0
- - "phyclk_hdmi_phy_tmds_clko" - hdmi phy tmds clock
- - "phyclk_hdmi_phy_pixel_clko" - hdmi phy pixel clock
- - "phyclk_hdmi_link_o_tmds_clkhi" - hdmi phy for hdmi link
- - "phyclk_dptx_phy_o_ref_clk_24m" - dp phy reference clock
- - "phyclk_dptx_phy_clk_div2"
- - "phyclk_mipi_dphy_4l_m_rxclkesc0"
- - "phyclk_usbhost20_phy_phyclock" - usb 2.0 phy clock
- - "phyclk_usbhost20_phy_freeclk"
- - "phyclk_usbhost20_phy_clk48mohci"
- - "phyclk_usbdrd30_udrd30_pipe_pclk"
- - "phyclk_usbdrd30_udrd30_phyclock" - usb 3.0 phy clock
-
-Required Properties for Clock Controller:
-
- - compatible: should be one of the following.
-	1) "samsung,exynos5260-clock-top"
-	2) "samsung,exynos5260-clock-peri"
-	3) "samsung,exynos5260-clock-egl"
-	4) "samsung,exynos5260-clock-kfc"
-	5) "samsung,exynos5260-clock-g2d"
-	6) "samsung,exynos5260-clock-mif"
-	7) "samsung,exynos5260-clock-mfc"
-	8) "samsung,exynos5260-clock-g3d"
-	9) "samsung,exynos5260-clock-fsys"
-	10) "samsung,exynos5260-clock-aud"
-	11) "samsung,exynos5260-clock-isp"
-	12) "samsung,exynos5260-clock-gscl"
-	13) "samsung,exynos5260-clock-disp"
-
- - reg: physical base address of the controller and the length of
-	memory mapped region.
-
- - #clock-cells: should be 1.
-
- - clocks: list of clock identifiers which are fed as the input to
-	the given clock controller. Please refer the next section to find
-	the input clocks for a given controller.
-
- - clock-names: list of names of clocks which are fed as the input
-	to the given clock controller.
-
-Input clocks for top clock controller:
-	- fin_pll
-	- dout_mem_pll
-	- dout_bus_pll
-	- dout_media_pll
-
-Input clocks for peri clock controller:
-	- fin_pll
-	- ioclk_pcm_extclk
-	- ioclk_i2s_cdclk
-	- ioclk_spdif_extclk
-	- phyclk_hdmi_phy_ref_cko
-	- dout_aclk_peri_66
-	- dout_sclk_peri_uart0
-	- dout_sclk_peri_uart1
-	- dout_sclk_peri_uart2
-	- dout_sclk_peri_spi0_b
-	- dout_sclk_peri_spi1_b
-	- dout_sclk_peri_spi2_b
-	- dout_aclk_peri_aud
-	- dout_sclk_peri_spi0_b
-
-Input clocks for egl clock controller:
-	- fin_pll
-	- dout_bus_pll
-
-Input clocks for kfc clock controller:
-	- fin_pll
-	- dout_media_pll
-
-Input clocks for g2d clock controller:
-	- fin_pll
-	- dout_aclk_g2d_333
-
-Input clocks for mif clock controller:
-	- fin_pll
-
-Input clocks for mfc clock controller:
-	- fin_pll
-	- dout_aclk_mfc_333
-
-Input clocks for g3d clock controller:
-	- fin_pll
-
-Input clocks for fsys clock controller:
-	- fin_pll
-	- phyclk_usbhost20_phy_phyclock
-	- phyclk_usbhost20_phy_freeclk
-	- phyclk_usbhost20_phy_clk48mohci
-	- phyclk_usbdrd30_udrd30_pipe_pclk
-	- phyclk_usbdrd30_udrd30_phyclock
-	- dout_aclk_fsys_200
-
-Input clocks for aud clock controller:
-	- fin_pll
-	- fout_aud_pll
-	- ioclk_i2s_cdclk
-	- ioclk_pcm_extclk
-
-Input clocks for isp clock controller:
-	- fin_pll
-	- dout_aclk_isp1_266
-	- dout_aclk_isp1_400
-	- mout_aclk_isp1_266
-
-Input clocks for gscl clock controller:
-	- fin_pll
-	- dout_aclk_gscl_400
-	- dout_aclk_gscl_333
-
-Input clocks for disp clock controller:
-	- fin_pll
-	- phyclk_dptx_phy_ch3_txd_clk
-	- phyclk_dptx_phy_ch2_txd_clk
-	- phyclk_dptx_phy_ch1_txd_clk
-	- phyclk_dptx_phy_ch0_txd_clk
-	- phyclk_hdmi_phy_tmds_clko
-	- phyclk_hdmi_phy_ref_clko
-	- phyclk_hdmi_phy_pixel_clko
-	- phyclk_hdmi_link_o_tmds_clkhi
-	- phyclk_mipi_dphy_4l_m_txbyte_clkhs
-	- phyclk_dptx_phy_o_ref_clk_24m
-	- phyclk_dptx_phy_clk_div2
-	- phyclk_mipi_dphy_4l_m_rxclkesc0
-	- phyclk_hdmi_phy_ref_cko
-	- ioclk_spdif_extclk
-	- dout_aclk_peri_aud
-	- dout_aclk_disp_222
-	- dout_sclk_disp_pixel
-	- dout_aclk_disp_333
-
-Example 1: An example of a clock controller node is listed below.
-
-	clock_mfc: clock-controller@11090000 {
-		compatible = "samsung,exynos5260-clock-mfc";
-		clock = <&fin_pll>, <&clock_top TOP_DOUT_ACLK_MFC_333>;
-		clock-names = "fin_pll", "dout_aclk_mfc_333";
-		reg = <0x11090000 0x10000>;
-		#clock-cells = <1>;
-	};
-
-Example 2: UART controller node that consumes the clock generated by the
-		peri clock controller. Refer to the standard clock bindings for
-		information about 'clocks' and 'clock-names' property.
-
-	serial@12c00000 {
-		compatible = "samsung,exynos4210-uart";
-		reg = <0x12C00000 0x100>;
-		interrupts = <0 146 0>;
-		clocks = <&clock_peri PERI_PCLK_UART0>, <&clock_peri PERI_SCLK_UART0>;
-		clock-names = "uart", "clk_uart_baud0";
-	};
-
diff --git a/dts/Bindings/clock/exynos5410-clock.txt b/dts/Bindings/clock/exynos5410-clock.txt
deleted file mode 100644
index 217beb27c3..0000000000
--- a/dts/Bindings/clock/exynos5410-clock.txt
+++ /dev/null
@@ -1,50 +0,0 @@
-* Samsung Exynos5410 Clock Controller
-
-The Exynos5410 clock controller generates and supplies clock to various
-controllers within the Exynos5410 SoC.
-
-Required Properties:
-
-- compatible: should be "samsung,exynos5410-clock"
-
-- reg: physical base address of the controller and length of memory mapped
-  region.
-
-- #clock-cells: should be 1.
-
-- clocks: should contain an entry specifying the root clock from external
-  oscillator supplied through XXTI or XusbXTI pin.  This clock should be
-  defined using standard clock bindings with "fin_pll" clock-output-name.
-  That clock is being passed internally to the 9 PLLs.
-
-All available clocks are defined as preprocessor macros in
-dt-bindings/clock/exynos5410.h header and can be used in device
-tree sources.
-
-Example 1: An example of a clock controller node is listed below.
-
-	fin_pll: xxti {
-		compatible = "fixed-clock";
-		clock-frequency = <24000000>;
-		clock-output-names = "fin_pll";
-		#clock-cells = <0>;
-	};
-
-	clock: clock-controller@10010000 {
-		compatible = "samsung,exynos5410-clock";
-		reg = <0x10010000 0x30000>;
-		#clock-cells = <1>;
-		clocks = <&fin_pll>;
-	};
-
-Example 2: UART controller node that consumes the clock generated by the clock
-	   controller. Refer to the standard clock bindings for information
-	   about 'clocks' and 'clock-names' property.
-
-	serial@12c20000 {
-		compatible = "samsung,exynos4210-uart";
-		reg = <0x12C00000 0x100>;
-		interrupts = <0 51 0>;
-		clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
-		clock-names = "uart", "clk_uart_baud0";
-	};
diff --git a/dts/Bindings/clock/exynos5433-clock.txt b/dts/Bindings/clock/exynos5433-clock.txt
deleted file mode 100644
index 183c327a7d..0000000000
--- a/dts/Bindings/clock/exynos5433-clock.txt
+++ /dev/null
@@ -1,507 +0,0 @@
-* Samsung Exynos5433 CMU (Clock Management Units)
-
-The Exynos5433 clock controller generates and supplies clock to various
-controllers within the Exynos5433 SoC.
-
-Required Properties:
-
-- compatible: should be one of the following.
-  - "samsung,exynos5433-cmu-top"   - clock controller compatible for CMU_TOP
-    which generates clocks for IMEM/FSYS/G3D/GSCL/HEVC/MSCL/G2D/MFC/PERIC/PERIS
-    domains and bus clocks.
-  - "samsung,exynos5433-cmu-cpif"  - clock controller compatible for CMU_CPIF
-    which generates clocks for LLI (Low Latency Interface) IP.
-  - "samsung,exynos5433-cmu-mif"   - clock controller compatible for CMU_MIF
-    which generates clocks for DRAM Memory Controller domain.
-  - "samsung,exynos5433-cmu-peric" - clock controller compatible for CMU_PERIC
-    which generates clocks for UART/I2C/SPI/I2S/PCM/SPDIF/PWM/SLIMBUS IPs.
-  - "samsung,exynos5433-cmu-peris" - clock controller compatible for CMU_PERIS
-    which generates clocks for PMU/TMU/MCT/WDT/RTC/SECKEY/TZPC IPs.
-  - "samsung,exynos5433-cmu-fsys"  - clock controller compatible for CMU_FSYS
-    which generates clocks for USB/UFS/SDMMC/TSI/PDMA IPs.
-  - "samsung,exynos5433-cmu-g2d"   - clock controller compatible for CMU_G2D
-    which generates clocks for G2D/MDMA IPs.
-  - "samsung,exynos5433-cmu-disp"  - clock controller compatible for CMU_DISP
-    which generates clocks for Display (DECON/HDMI/DSIM/MIXER) IPs.
-  - "samsung,exynos5433-cmu-aud"   - clock controller compatible for CMU_AUD
-    which generates clocks for Cortex-A5/BUS/AUDIO clocks.
-  - "samsung,exynos5433-cmu-bus0", "samsung,exynos5433-cmu-bus1"
-    and "samsung,exynos5433-cmu-bus2" - clock controller compatible for CMU_BUS
-    which generates global data buses clock and global peripheral buses clock.
-  - "samsung,exynos5433-cmu-g3d"  - clock controller compatible for CMU_G3D
-    which generates clocks for 3D Graphics Engine IP.
-  - "samsung,exynos5433-cmu-gscl"  - clock controller compatible for CMU_GSCL
-    which generates clocks for GSCALER IPs.
-  - "samsung,exynos5433-cmu-apollo"- clock controller compatible for CMU_APOLLO
-    which generates clocks for Cortex-A53 Quad-core processor.
-  - "samsung,exynos5433-cmu-atlas" - clock controller compatible for CMU_ATLAS
-    which generates clocks for Cortex-A57 Quad-core processor, CoreSight and
-    L2 cache controller.
-  - "samsung,exynos5433-cmu-mscl" - clock controller compatible for CMU_MSCL
-    which generates clocks for M2M (Memory to Memory) scaler and JPEG IPs.
-  - "samsung,exynos5433-cmu-mfc"  - clock controller compatible for CMU_MFC
-    which generates clocks for MFC(Multi-Format Codec) IP.
-  - "samsung,exynos5433-cmu-hevc" - clock controller compatible for CMU_HEVC
-    which generates clocks for HEVC(High Efficiency Video Codec) decoder IP.
-  - "samsung,exynos5433-cmu-isp" - clock controller compatible for CMU_ISP
-    which generates clocks for FIMC-ISP/DRC/SCLC/DIS/3DNR IPs.
-  - "samsung,exynos5433-cmu-cam0" - clock controller compatible for CMU_CAM0
-    which generates clocks for MIPI_CSIS{0|1}/FIMC_LITE_{A|B|D}/FIMC_3AA{0|1}
-    IPs.
-  - "samsung,exynos5433-cmu-cam1" - clock controller compatible for CMU_CAM1
-    which generates clocks for Cortex-A5/MIPI_CSIS2/FIMC-LITE_C/FIMC-FD IPs.
-  - "samsung,exynos5433-cmu-imem"   - clock controller compatible for CMU_IMEM
-    which generates clocks for SSS (Security SubSystem) and SlimSSS IPs.
-
-- reg: physical base address of the controller and length of memory mapped
-  region.
-
-- #clock-cells: should be 1.
-
-- clocks: list of the clock controller input clock identifiers,
-	from common clock bindings. Please refer the next section
-	to find the input clocks for a given controller.
-
-- clock-names: list of the clock controller input clock names,
-	as described in clock-bindings.txt.
-
-	Input clocks for top clock controller:
-		- oscclk
-		- sclk_mphy_pll
-		- sclk_mfc_pll
-		- sclk_bus_pll
-
-	Input clocks for cpif clock controller:
-		- oscclk
-
-	Input clocks for mif clock controller:
-		- oscclk
-		- sclk_mphy_pll
-
-	Input clocks for fsys clock controller:
-		- oscclk
-		- sclk_ufs_mphy
-		- aclk_fsys_200
-		- sclk_pcie_100_fsys
-		- sclk_ufsunipro_fsys
-		- sclk_mmc2_fsys
-		- sclk_mmc1_fsys
-		- sclk_mmc0_fsys
-		- sclk_usbhost30_fsys
-		- sclk_usbdrd30_fsys
-
-	Input clocks for g2d clock controller:
-		- oscclk
-		- aclk_g2d_266
-		- aclk_g2d_400
-
-	Input clocks for disp clock controller:
-		- oscclk
-		- sclk_dsim1_disp
-		- sclk_dsim0_disp
-		- sclk_dsd_disp
-		- sclk_decon_tv_eclk_disp
-		- sclk_decon_vclk_disp
-		- sclk_decon_eclk_disp
-		- sclk_decon_tv_vclk_disp
-		- aclk_disp_333
-
-	Input clocks for audio clock controller:
-		- oscclk
-		- fout_aud_pll
-
-	Input clocks for bus0 clock controller:
-		- aclk_bus0_400
-
-	Input clocks for bus1 clock controller:
-		- aclk_bus1_400
-
-	Input clocks for bus2 clock controller:
-		- oscclk
-		- aclk_bus2_400
-
-	Input clocks for g3d clock controller:
-		- oscclk
-		- aclk_g3d_400
-
-	Input clocks for gscl clock controller:
-		- oscclk
-		- aclk_gscl_111
-		- aclk_gscl_333
-
-	Input clocks for apollo clock controller:
-		- oscclk
-		- sclk_bus_pll_apollo
-
-	Input clocks for atlas clock controller:
-		- oscclk
-		- sclk_bus_pll_atlas
-
-	Input clocks for mscl clock controller:
-		- oscclk
-		- sclk_jpeg_mscl
-		- aclk_mscl_400
-
-	Input clocks for mfc clock controller:
-		- oscclk
-		- aclk_mfc_400
-
-	Input clocks for hevc clock controller:
-		- oscclk
-		- aclk_hevc_400
-
-	Input clocks for isp clock controller:
-		- oscclk
-		- aclk_isp_dis_400
-		- aclk_isp_400
-
-	Input clocks for cam0 clock controller:
-		- oscclk
-		- aclk_cam0_333
-		- aclk_cam0_400
-		- aclk_cam0_552
-
-	Input clocks for cam1 clock controller:
-		- oscclk
-		- sclk_isp_uart_cam1
-		- sclk_isp_spi1_cam1
-		- sclk_isp_spi0_cam1
-		- aclk_cam1_333
-		- aclk_cam1_400
-		- aclk_cam1_552
-
-	Input clocks for imem clock controller:
-		- oscclk
-		- aclk_imem_sssx_266
-		- aclk_imem_266
-		- aclk_imem_200
-
-Optional properties:
-  - power-domains: a phandle to respective power domain node as described by
-	generic PM domain bindings (see power/power_domain.txt for more
-	information).
-
-Each clock is assigned an identifier and client nodes can use this identifier
-to specify the clock which they consume.
-
-All available clocks are defined as preprocessor macros in
-dt-bindings/clock/exynos5433.h header and can be used in device
-tree sources.
-
-Example 1: Examples of 'oscclk' source clock node are listed below.
-
-	xxti: xxti {
-		compatible = "fixed-clock";
-		clock-output-names = "oscclk";
-		#clock-cells = <0>;
-	};
-
-Example 2: Examples of clock controller nodes are listed below.
-
-	cmu_top: clock-controller@10030000 {
-		compatible = "samsung,exynos5433-cmu-top";
-		reg = <0x10030000 0x0c04>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk",
-			"sclk_mphy_pll",
-			"sclk_mfc_pll",
-			"sclk_bus_pll";
-		clocks = <&xxti>,
-		       <&cmu_cpif CLK_SCLK_MPHY_PLL>,
-		       <&cmu_mif CLK_SCLK_MFC_PLL>,
-		       <&cmu_mif CLK_SCLK_BUS_PLL>;
-	};
-
-	cmu_cpif: clock-controller@10fc0000 {
-		compatible = "samsung,exynos5433-cmu-cpif";
-		reg = <0x10fc0000 0x0c04>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk";
-		clocks = <&xxti>;
-	};
-
-	cmu_mif: clock-controller@105b0000 {
-		compatible = "samsung,exynos5433-cmu-mif";
-		reg = <0x105b0000 0x100c>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk",
-			"sclk_mphy_pll";
-		clocks = <&xxti>,
-		       <&cmu_cpif CLK_SCLK_MPHY_PLL>;
-	};
-
-	cmu_peric: clock-controller@14c80000 {
-		compatible = "samsung,exynos5433-cmu-peric";
-		reg = <0x14c80000 0x0b08>;
-		#clock-cells = <1>;
-	};
-
-	cmu_peris: clock-controller@10040000 {
-		compatible = "samsung,exynos5433-cmu-peris";
-		reg = <0x10040000 0x0b20>;
-		#clock-cells = <1>;
-	};
-
-	cmu_fsys: clock-controller@156e0000 {
-		compatible = "samsung,exynos5433-cmu-fsys";
-		reg = <0x156e0000 0x0b04>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk",
-			"sclk_ufs_mphy",
-			"aclk_fsys_200",
-			"sclk_pcie_100_fsys",
-			"sclk_ufsunipro_fsys",
-			"sclk_mmc2_fsys",
-			"sclk_mmc1_fsys",
-			"sclk_mmc0_fsys",
-			"sclk_usbhost30_fsys",
-			"sclk_usbdrd30_fsys";
-		clocks = <&xxti>,
-		       <&cmu_cpif CLK_SCLK_UFS_MPHY>,
-		       <&cmu_top CLK_ACLK_FSYS_200>,
-		       <&cmu_top CLK_SCLK_PCIE_100_FSYS>,
-		       <&cmu_top CLK_SCLK_UFSUNIPRO_FSYS>,
-		       <&cmu_top CLK_SCLK_MMC2_FSYS>,
-		       <&cmu_top CLK_SCLK_MMC1_FSYS>,
-		       <&cmu_top CLK_SCLK_MMC0_FSYS>,
-		       <&cmu_top CLK_SCLK_USBHOST30_FSYS>,
-		       <&cmu_top CLK_SCLK_USBDRD30_FSYS>;
-	};
-
-	cmu_g2d: clock-controller@12460000 {
-		compatible = "samsung,exynos5433-cmu-g2d";
-		reg = <0x12460000 0x0b08>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk",
-			"aclk_g2d_266",
-			"aclk_g2d_400";
-		clocks = <&xxti>,
-		       <&cmu_top CLK_ACLK_G2D_266>,
-		       <&cmu_top CLK_ACLK_G2D_400>;
-		power-domains = <&pd_g2d>;
-	};
-
-	cmu_disp: clock-controller@13b90000 {
-		compatible = "samsung,exynos5433-cmu-disp";
-		reg = <0x13b90000 0x0c04>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk",
-			"sclk_dsim1_disp",
-			"sclk_dsim0_disp",
-			"sclk_dsd_disp",
-			"sclk_decon_tv_eclk_disp",
-			"sclk_decon_vclk_disp",
-			"sclk_decon_eclk_disp",
-			"sclk_decon_tv_vclk_disp",
-			"aclk_disp_333";
-		clocks = <&xxti>,
-		       <&cmu_mif CLK_SCLK_DSIM1_DISP>,
-		       <&cmu_mif CLK_SCLK_DSIM0_DISP>,
-		       <&cmu_mif CLK_SCLK_DSD_DISP>,
-		       <&cmu_mif CLK_SCLK_DECON_TV_ECLK_DISP>,
-		       <&cmu_mif CLK_SCLK_DECON_VCLK_DISP>,
-		       <&cmu_mif CLK_SCLK_DECON_ECLK_DISP>,
-		       <&cmu_mif CLK_SCLK_DECON_TV_VCLK_DISP>,
-		       <&cmu_mif CLK_ACLK_DISP_333>;
-		power-domains = <&pd_disp>;
-	};
-
-	cmu_aud: clock-controller@114c0000 {
-		compatible = "samsung,exynos5433-cmu-aud";
-		reg = <0x114c0000 0x0b04>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk", "fout_aud_pll";
-		clocks = <&xxti>, <&cmu_top CLK_FOUT_AUD_PLL>;
-		power-domains = <&pd_aud>;
-	};
-
-	cmu_bus0: clock-controller@13600000 {
-		compatible = "samsung,exynos5433-cmu-bus0";
-		reg = <0x13600000 0x0b04>;
-		#clock-cells = <1>;
-
-		clock-names = "aclk_bus0_400";
-		clocks = <&cmu_top CLK_ACLK_BUS0_400>;
-	};
-
-	cmu_bus1: clock-controller@14800000 {
-		compatible = "samsung,exynos5433-cmu-bus1";
-		reg = <0x14800000 0x0b04>;
-		#clock-cells = <1>;
-
-		clock-names = "aclk_bus1_400";
-		clocks = <&cmu_top CLK_ACLK_BUS1_400>;
-	};
-
-	cmu_bus2: clock-controller@13400000 {
-		compatible = "samsung,exynos5433-cmu-bus2";
-		reg = <0x13400000 0x0b04>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk", "aclk_bus2_400";
-		clocks = <&xxti>, <&cmu_mif CLK_ACLK_BUS2_400>;
-	};
-
-	cmu_g3d: clock-controller@14aa0000 {
-		compatible = "samsung,exynos5433-cmu-g3d";
-		reg = <0x14aa0000 0x1000>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk", "aclk_g3d_400";
-		clocks = <&xxti>, <&cmu_top CLK_ACLK_G3D_400>;
-		power-domains = <&pd_g3d>;
-	};
-
-	cmu_gscl: clock-controller@13cf0000 {
-		compatible = "samsung,exynos5433-cmu-gscl";
-		reg = <0x13cf0000 0x0b10>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk",
-			"aclk_gscl_111",
-			"aclk_gscl_333";
-		clocks = <&xxti>,
-			<&cmu_top CLK_ACLK_GSCL_111>,
-			<&cmu_top CLK_ACLK_GSCL_333>;
-		power-domains = <&pd_gscl>;
-	};
-
-	cmu_apollo: clock-controller@11900000 {
-		compatible = "samsung,exynos5433-cmu-apollo";
-		reg = <0x11900000 0x1088>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk", "sclk_bus_pll_apollo";
-		clocks = <&xxti>, <&cmu_mif CLK_SCLK_BUS_PLL_APOLLO>;
-	};
-
-	cmu_atlas: clock-controller@11800000 {
-		compatible = "samsung,exynos5433-cmu-atlas";
-		reg = <0x11800000 0x1088>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk", "sclk_bus_pll_atlas";
-		clocks = <&xxti>, <&cmu_mif CLK_SCLK_BUS_PLL_ATLAS>;
-	};
-
-	cmu_mscl: clock-controller@105d0000 {
-		compatible = "samsung,exynos5433-cmu-mscl";
-		reg = <0x105d0000 0x0b10>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk",
-			"sclk_jpeg_mscl",
-			"aclk_mscl_400";
-		clocks = <&xxti>,
-		       <&cmu_top CLK_SCLK_JPEG_MSCL>,
-		       <&cmu_top CLK_ACLK_MSCL_400>;
-		power-domains = <&pd_mscl>;
-	};
-
-	cmu_mfc: clock-controller@15280000 {
-		compatible = "samsung,exynos5433-cmu-mfc";
-		reg = <0x15280000 0x0b08>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk", "aclk_mfc_400";
-		clocks = <&xxti>, <&cmu_top CLK_ACLK_MFC_400>;
-		power-domains = <&pd_mfc>;
-	};
-
-	cmu_hevc: clock-controller@14f80000 {
-		compatible = "samsung,exynos5433-cmu-hevc";
-		reg = <0x14f80000 0x0b08>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk", "aclk_hevc_400";
-		clocks = <&xxti>, <&cmu_top CLK_ACLK_HEVC_400>;
-		power-domains = <&pd_hevc>;
-	};
-
-	cmu_isp: clock-controller@146d0000 {
-		compatible = "samsung,exynos5433-cmu-isp";
-		reg = <0x146d0000 0x0b0c>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk",
-			"aclk_isp_dis_400",
-			"aclk_isp_400";
-		clocks = <&xxti>,
-		       <&cmu_top CLK_ACLK_ISP_DIS_400>,
-		       <&cmu_top CLK_ACLK_ISP_400>;
-		power-domains = <&pd_isp>;
-	};
-
-	cmu_cam0: clock-controller@120d0000 {
-		compatible = "samsung,exynos5433-cmu-cam0";
-		reg = <0x120d0000 0x0b0c>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk",
-			"aclk_cam0_333",
-			"aclk_cam0_400",
-			"aclk_cam0_552";
-		clocks = <&xxti>,
-		       <&cmu_top CLK_ACLK_CAM0_333>,
-		       <&cmu_top CLK_ACLK_CAM0_400>,
-		       <&cmu_top CLK_ACLK_CAM0_552>;
-		power-domains = <&pd_cam0>;
-	};
-
-	cmu_cam1: clock-controller@145d0000 {
-		compatible = "samsung,exynos5433-cmu-cam1";
-		reg = <0x145d0000 0x0b08>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk",
-			"sclk_isp_uart_cam1",
-			"sclk_isp_spi1_cam1",
-			"sclk_isp_spi0_cam1",
-			"aclk_cam1_333",
-			"aclk_cam1_400",
-			"aclk_cam1_552";
-		clocks = <&xxti>,
-		       <&cmu_top CLK_SCLK_ISP_UART_CAM1>,
-		       <&cmu_top CLK_SCLK_ISP_SPI1_CAM1>,
-		       <&cmu_top CLK_SCLK_ISP_SPI0_CAM1>,
-		       <&cmu_top CLK_ACLK_CAM1_333>,
-		       <&cmu_top CLK_ACLK_CAM1_400>,
-		       <&cmu_top CLK_ACLK_CAM1_552>;
-		power-domains = <&pd_cam1>;
-	};
-
-	cmu_imem: clock-controller@11060000 {
-		compatible = "samsung,exynos5433-cmu-imem";
-		reg = <0x11060000 0x1000>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk",
-			"aclk_imem_sssx_266",
-			"aclk_imem_266",
-			"aclk_imem_200";
-		clocks = <&xxti>,
-			<&cmu_top CLK_DIV_ACLK_IMEM_SSSX_266>,
-			<&cmu_top CLK_DIV_ACLK_IMEM_266>,
-			<&cmu_top CLK_DIV_ACLK_IMEM_200>;
-	};
-
-Example 3: UART controller node that consumes the clock generated by the clock
-	   controller.
-
-	serial_0: serial@14c10000 {
-		compatible = "samsung,exynos5433-uart";
-		reg = <0x14C10000 0x100>;
-		interrupts = <0 421 0>;
-		clocks = <&cmu_peric CLK_PCLK_UART0>,
-			 <&cmu_peric CLK_SCLK_UART0>;
-		clock-names = "uart", "clk_uart_baud0";
-		pinctrl-names = "default";
-		pinctrl-0 = <&uart0_bus>;
-	};
diff --git a/dts/Bindings/clock/exynos7-clock.txt b/dts/Bindings/clock/exynos7-clock.txt
deleted file mode 100644
index 6bf1e7493f..0000000000
--- a/dts/Bindings/clock/exynos7-clock.txt
+++ /dev/null
@@ -1,108 +0,0 @@
-* Samsung Exynos7 Clock Controller
-
-Exynos7 clock controller has various blocks which are instantiated
-independently from the device-tree. These clock controllers
-generate and supply clocks to various hardware blocks within
-the SoC.
-
-Each clock is assigned an identifier and client nodes can use
-this identifier to specify the clock which they consume. All
-available clocks are defined as preprocessor macros in
-dt-bindings/clock/exynos7-clk.h header and can be used in
-device tree sources.
-
-External clocks:
-
-There are several clocks that are generated outside the SoC. It
-is expected that they are defined using standard clock bindings
-with following clock-output-names:
-
- - "fin_pll" - PLL input clock from XXTI
-
-Required Properties for Clock Controller:
-
- - compatible: clock controllers will use one of the following
-	compatible strings to indicate the clock controller
-	functionality.
-
-	- "samsung,exynos7-clock-topc"
-	- "samsung,exynos7-clock-top0"
-	- "samsung,exynos7-clock-top1"
-	- "samsung,exynos7-clock-ccore"
-	- "samsung,exynos7-clock-peric0"
-	- "samsung,exynos7-clock-peric1"
-	- "samsung,exynos7-clock-peris"
-	- "samsung,exynos7-clock-fsys0"
-	- "samsung,exynos7-clock-fsys1"
-	- "samsung,exynos7-clock-mscl"
-	- "samsung,exynos7-clock-aud"
-
- - reg: physical base address of the controller and the length of
-	memory mapped region.
-
- - #clock-cells: should be 1.
-
- - clocks: list of clock identifiers which are fed as the input to
-	the given clock controller. Please refer the next section to
-	find the input clocks for a given controller.
-
-- clock-names: list of names of clocks which are fed as the input
-	to the given clock controller.
-
-Input clocks for top0 clock controller:
-	- fin_pll
-	- dout_sclk_bus0_pll
-	- dout_sclk_bus1_pll
-	- dout_sclk_cc_pll
-	- dout_sclk_mfc_pll
-	- dout_sclk_aud_pll
-
-Input clocks for top1 clock controller:
-	- fin_pll
-	- dout_sclk_bus0_pll
-	- dout_sclk_bus1_pll
-	- dout_sclk_cc_pll
-	- dout_sclk_mfc_pll
-
-Input clocks for ccore clock controller:
-	- fin_pll
-	- dout_aclk_ccore_133
-
-Input clocks for peric0 clock controller:
-	- fin_pll
-	- dout_aclk_peric0_66
-	- sclk_uart0
-
-Input clocks for peric1 clock controller:
-	- fin_pll
-	- dout_aclk_peric1_66
-	- sclk_uart1
-	- sclk_uart2
-	- sclk_uart3
-	- sclk_spi0
-	- sclk_spi1
-	- sclk_spi2
-	- sclk_spi3
-	- sclk_spi4
-	- sclk_i2s1
-	- sclk_pcm1
-	- sclk_spdif
-
-Input clocks for peris clock controller:
-	- fin_pll
-	- dout_aclk_peris_66
-
-Input clocks for fsys0 clock controller:
-	- fin_pll
-	- dout_aclk_fsys0_200
-	- dout_sclk_mmc2
-
-Input clocks for fsys1 clock controller:
-	- fin_pll
-	- dout_aclk_fsys1_200
-	- dout_sclk_mmc0
-	- dout_sclk_mmc1
-
-Input clocks for aud clock controller:
-	- fin_pll
-	- fout_aud_pll
diff --git a/dts/Bindings/clock/imx5-clock.yaml b/dts/Bindings/clock/imx5-clock.yaml
index b1740d7abe..c0e19ff92c 100644
--- a/dts/Bindings/clock/imx5-clock.yaml
+++ b/dts/Bindings/clock/imx5-clock.yaml
@@ -55,11 +55,4 @@ examples:
                      <0 72 IRQ_TYPE_LEVEL_HIGH>;
         #clock-cells = <1>;
     };
-
-    can@53fc8000 {
-        compatible = "fsl,imx53-flexcan", "fsl,imx25-flexcan";
-        reg = <0x53fc8000 0x4000>;
-        interrupts = <82>;
-        clocks = <&clks IMX5_CLK_CAN1_IPG_GATE>, <&clks IMX5_CLK_CAN1_SERIAL_GATE>;
-        clock-names = "ipg", "per";
-    };
+...
diff --git a/dts/Bindings/clock/microchip,lan966x-gck.yaml b/dts/Bindings/clock/microchip,lan966x-gck.yaml
new file mode 100644
index 0000000000..df2bec1887
--- /dev/null
+++ b/dts/Bindings/clock/microchip,lan966x-gck.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/microchip,lan966x-gck.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip LAN966X Generic Clock Controller
+
+maintainers:
+  - Kavyasree Kotagiri <kavyasree.kotagiri@microchip.com>
+
+description: |
+  The LAN966X Generic clock controller contains 3 PLLs - cpu_clk,
+  ddr_clk and sys_clk. This clock controller generates and supplies
+  clock to various peripherals within the SoC.
+
+properties:
+  compatible:
+    const: microchip,lan966x-gck
+
+  reg:
+    minItems: 1
+    items:
+      - description: Generic clock registers
+      - description: Optional gate clock registers
+
+  clocks:
+    items:
+      - description: CPU clock source
+      - description: DDR clock source
+      - description: System clock source
+
+  clock-names:
+    items:
+      - const: cpu
+      - const: ddr
+      - const: sys
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clks: clock-controller@e00c00a8 {
+        compatible = "microchip,lan966x-gck";
+        #clock-cells = <1>;
+        clocks = <&cpu_clk>, <&ddr_clk>, <&sys_clk>;
+        clock-names = "cpu", "ddr", "sys";
+        reg = <0xe00c00a8 0x38>;
+    };
+...
diff --git a/dts/Bindings/clock/nvidia,tegra20-car.yaml b/dts/Bindings/clock/nvidia,tegra20-car.yaml
index 459d2a5253..f832abb7f1 100644
--- a/dts/Bindings/clock/nvidia,tegra20-car.yaml
+++ b/dts/Bindings/clock/nvidia,tegra20-car.yaml
@@ -42,6 +42,36 @@ properties:
   "#reset-cells":
     const: 1
 
+patternProperties:
+  "^(sclk)|(pll-[cem])$":
+    type: object
+    properties:
+      compatible:
+        enum:
+          - nvidia,tegra20-sclk
+          - nvidia,tegra30-sclk
+          - nvidia,tegra30-pllc
+          - nvidia,tegra30-plle
+          - nvidia,tegra30-pllm
+
+      operating-points-v2: true
+
+      clocks:
+        items:
+          - description: node's clock
+
+      power-domains:
+        maxItems: 1
+        description: phandle to the core SoC power domain
+
+    required:
+      - compatible
+      - operating-points-v2
+      - clocks
+      - power-domains
+
+    additionalProperties: false
+
 required:
   - compatible
   - reg
@@ -59,6 +89,13 @@ examples:
         reg = <0x60006000 0x1000>;
         #clock-cells = <1>;
         #reset-cells = <1>;
+
+        sclk {
+            compatible = "nvidia,tegra20-sclk";
+            operating-points-v2 = <&opp_table>;
+            clocks = <&tegra_car TEGRA20_CLK_SCLK>;
+            power-domains = <&domain>;
+        };
     };
 
     usb-controller@c5004000 {
diff --git a/dts/Bindings/clock/qcom,gcc-msm8976.yaml b/dts/Bindings/clock/qcom,gcc-msm8976.yaml
new file mode 100644
index 0000000000..f3430b159c
--- /dev/null
+++ b/dts/Bindings/clock/qcom,gcc-msm8976.yaml
@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-msm8976.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller Binding for MSM8976
+
+maintainers:
+  - Stephen Boyd <sboyd@kernel.org>
+  - Taniya Das <tdas@codeaurora.org>
+
+description: |
+  Qualcomm global clock control module which supports the clocks, resets and
+  power domains on MSM8976.
+
+  See also:
+  - dt-bindings/clock/qcom,gcc-msm8976.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,gcc-msm8976
+      - qcom,gcc-msm8976-v1.1
+
+  clocks:
+    items:
+      - description: XO source
+      - description: Always-on XO source
+      - description: Pixel clock from DSI PHY0
+      - description: Byte clock from DSI PHY0
+      - description: Pixel clock from DSI PHY1
+      - description: Byte clock from DSI PHY1
+
+  clock-names:
+    items:
+      - const: xo
+      - const: xo_a
+      - const: dsi0pll
+      - const: dsi0pllbyte
+      - const: dsi1pll
+      - const: dsi1pllbyte
+
+  vdd_gfx-supply:
+    description:
+      Phandle to voltage regulator providing power to the GX domain.
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - vdd_gfx-supply
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@1800000 {
+      compatible = "qcom,gcc-msm8976";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+      reg = <0x1800000 0x80000>;
+
+      clocks = <&xo_board>,
+               <&xo_board>,
+               <&dsi0_phy 1>,
+               <&dsi0_phy 0>,
+               <&dsi1_phy 1>,
+               <&dsi1_phy 0>;
+
+      clock-names = "xo",
+                    "xo_a",
+                    "dsi0pll",
+                    "dsi0pllbyte",
+                    "dsi1pll",
+                    "dsi1pllbyte";
+
+      vdd_gfx-supply = <&pm8004_s5>;
+    };
+...
diff --git a/dts/Bindings/clock/qcom,gcc-sdx65.yaml b/dts/Bindings/clock/qcom,gcc-sdx65.yaml
new file mode 100644
index 0000000000..16c4cdc7b4
--- /dev/null
+++ b/dts/Bindings/clock/qcom,gcc-sdx65.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-sdx65.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller Binding for SDX65
+
+maintainers:
+  - Vamsi krishna Lanka <quic_vamslank@quicinc.com>
+
+description: |
+  Qualcomm global clock control module which supports the clocks, resets and
+  power domains on SDX65
+
+  See also:
+  - dt-bindings/clock/qcom,gcc-sdx65.h
+
+properties:
+  compatible:
+    const: qcom,gcc-sdx65
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Board active XO source
+      - description: Sleep clock source
+      - description: PCIE Pipe clock source
+      - description: USB3 phy wrapper pipe clock source
+      - description: PLL test clock source (Optional clock)
+    minItems: 5
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+      - const: bi_tcxo_ao
+      - const: sleep_clk
+      - const: pcie_pipe_clk
+      - const: usb3_phy_wrapper_gcc_usb30_pipe_clk
+      - const: core_bi_pll_test_se # Optional clock
+    minItems: 5
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@100000 {
+      compatible = "qcom,gcc-sdx65";
+      reg = <0x100000 0x1f7400>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>, <&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>,
+               <&pcie_pipe_clk>, <&usb3_phy_wrapper_gcc_usb30_pipe_clk>, <&pll_test_clk>;
+      clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk",
+                    "pcie_pipe_clk", "usb3_phy_wrapper_gcc_usb30_pipe_clk", "core_bi_pll_test_se";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/dts/Bindings/clock/qcom,gcc-sm8450.yaml b/dts/Bindings/clock/qcom,gcc-sm8450.yaml
new file mode 100644
index 0000000000..58d98a766d
--- /dev/null
+++ b/dts/Bindings/clock/qcom,gcc-sm8450.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-sm8450.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller Binding for SM8450
+
+maintainers:
+  - Vinod Koul <vkoul@kernel.org>
+
+description: |
+  Qualcomm global clock control module which supports the clocks, resets and
+  power domains on SM8450
+
+  See also:
+  - dt-bindings/clock/qcom,gcc-sm8450.h
+
+properties:
+  compatible:
+    const: qcom,gcc-sm8450
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Sleep clock source
+      - description: PCIE 0 Pipe clock source (Optional clock)
+      - description: PCIE 1 Pipe clock source (Optional clock)
+      - description: PCIE 1 Phy Auxillary clock source (Optional clock)
+      - description: UFS Phy Rx symbol 0 clock source (Optional clock)
+      - description: UFS Phy Rx symbol 1 clock source (Optional clock)
+      - description: UFS Phy Tx symbol 0 clock source (Optional clock)
+      - description: USB3 Phy wrapper pipe clock source (Optional clock)
+    minItems: 2
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+      - const: sleep_clk
+      - const: pcie_0_pipe_clk # Optional clock
+      - const: pcie_1_pipe_clk # Optional clock
+      - const: pcie_1_phy_aux_clk # Optional clock
+      - const: ufs_phy_rx_symbol_0_clk # Optional clock
+      - const: ufs_phy_rx_symbol_1_clk # Optional clock
+      - const: ufs_phy_tx_symbol_0_clk # Optional clock
+      - const: usb3_phy_wrapper_gcc_usb30_pipe_clk # Optional clock
+    minItems: 2
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@100000 {
+      compatible = "qcom,gcc-sm8450";
+      reg = <0x00100000 0x001f4200>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>;
+      clock-names = "bi_tcxo", "sleep_clk";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+
+...
diff --git a/dts/Bindings/clock/qcom,rpmhcc.yaml b/dts/Bindings/clock/qcom,rpmhcc.yaml
index 72212970e6..8406dde179 100644
--- a/dts/Bindings/clock/qcom,rpmhcc.yaml
+++ b/dts/Bindings/clock/qcom,rpmhcc.yaml
@@ -22,10 +22,12 @@ properties:
       - qcom,sc8180x-rpmh-clk
       - qcom,sdm845-rpmh-clk
       - qcom,sdx55-rpmh-clk
+      - qcom,sdx65-rpmh-clk
       - qcom,sm6350-rpmh-clk
       - qcom,sm8150-rpmh-clk
       - qcom,sm8250-rpmh-clk
       - qcom,sm8350-rpmh-clk
+      - qcom,sm8450-rpmh-clk
 
   clocks:
     maxItems: 1
diff --git a/dts/Bindings/clock/renesas,cpg-mssr.yaml b/dts/Bindings/clock/renesas,cpg-mssr.yaml
index 9b414fbde6..e0b86214f0 100644
--- a/dts/Bindings/clock/renesas,cpg-mssr.yaml
+++ b/dts/Bindings/clock/renesas,cpg-mssr.yaml
@@ -48,6 +48,7 @@ properties:
       - renesas,r8a77990-cpg-mssr # R-Car E3
       - renesas,r8a77995-cpg-mssr # R-Car D3
       - renesas,r8a779a0-cpg-mssr # R-Car V3U
+      - renesas,r8a779f0-cpg-mssr # R-Car S4-8
 
   reg:
     maxItems: 1
diff --git a/dts/Bindings/clock/samsung,exynos5260-clock.yaml b/dts/Bindings/clock/samsung,exynos5260-clock.yaml
new file mode 100644
index 0000000000..a3fac5c680
--- /dev/null
+++ b/dts/Bindings/clock/samsung,exynos5260-clock.yaml
@@ -0,0 +1,382 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/samsung,exynos5260-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos5260 SoC clock controller
+
+maintainers:
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+  - Tomasz Figa <tomasz.figa@gmail.com>
+
+description: |
+  Expected external clocks, defined in DTS as fixed-rate clocks with a matching
+  name::
+    - "fin_pll" - PLL input clock from XXTI
+    - "xrtcxti" - input clock from XRTCXTI
+    - "ioclk_pcm_extclk" - pcm external operation clock
+    - "ioclk_spdif_extclk" - spdif external operation clock
+    - "ioclk_i2s_cdclk" - i2s0 codec clock
+
+  Phy clocks::
+  There are several clocks which are generated by specific PHYs.  These clocks
+  are fed into the clock controller and then routed to the hardware blocks.
+  These clocks are defined as fixed clocks in the driver with following names::
+    - "phyclk_dptx_phy_ch3_txd_clk" - dp phy clock for channel 3
+    - "phyclk_dptx_phy_ch2_txd_clk" - dp phy clock for channel 2
+    - "phyclk_dptx_phy_ch1_txd_clk" - dp phy clock for channel 1
+    - "phyclk_dptx_phy_ch0_txd_clk" - dp phy clock for channel 0
+    - "phyclk_hdmi_phy_tmds_clko" - hdmi phy tmds clock
+    - "phyclk_hdmi_phy_pixel_clko" - hdmi phy pixel clock
+    - "phyclk_hdmi_link_o_tmds_clkhi" - hdmi phy for hdmi link
+    - "phyclk_dptx_phy_o_ref_clk_24m" - dp phy reference clock
+    - "phyclk_dptx_phy_clk_div2"
+    - "phyclk_mipi_dphy_4l_m_rxclkesc0"
+    - "phyclk_usbhost20_phy_phyclock" - usb 2.0 phy clock
+    - "phyclk_usbhost20_phy_freeclk"
+    - "phyclk_usbhost20_phy_clk48mohci"
+    - "phyclk_usbdrd30_udrd30_pipe_pclk"
+    - "phyclk_usbdrd30_udrd30_phyclock" - usb 3.0 phy clock
+
+  All available clocks are defined as preprocessor macros in
+  include/dt-bindings/clock/exynos5260-clk.h header.
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynos5260-clock-top
+      - samsung,exynos5260-clock-peri
+      - samsung,exynos5260-clock-egl
+      - samsung,exynos5260-clock-kfc
+      - samsung,exynos5260-clock-g2d
+      - samsung,exynos5260-clock-mif
+      - samsung,exynos5260-clock-mfc
+      - samsung,exynos5260-clock-g3d
+      - samsung,exynos5260-clock-fsys
+      - samsung,exynos5260-clock-aud
+      - samsung,exynos5260-clock-isp
+      - samsung,exynos5260-clock-gscl
+      - samsung,exynos5260-clock-disp
+
+  clocks:
+    minItems: 1
+    maxItems: 19
+
+  clock-names:
+    minItems: 1
+    maxItems: 19
+
+  "#clock-cells":
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - "#clock-cells"
+  - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5260-clock-top
+    then:
+      properties:
+        clocks:
+          minItems: 4
+          maxItems: 4
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_mem_pll
+            - const: dout_bus_pll
+            - const: dout_media_pll
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5260-clock-peri
+    then:
+      properties:
+        clocks:
+          minItems: 13
+          maxItems: 13
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: ioclk_pcm_extclk
+            - const: ioclk_i2s_cdclk
+            - const: ioclk_spdif_extclk
+            - const: phyclk_hdmi_phy_ref_cko
+            - const: dout_aclk_peri_66
+            - const: dout_sclk_peri_uart0
+            - const: dout_sclk_peri_uart1
+            - const: dout_sclk_peri_uart2
+            - const: dout_sclk_peri_spi0_b
+            - const: dout_sclk_peri_spi1_b
+            - const: dout_sclk_peri_spi2_b
+            - const: dout_aclk_peri_aud
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5260-clock-egl
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_bus_pll
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5260-clock-kfc
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_media_pll
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5260-clock-g2d
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_aclk_g2d_333
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5260-clock-mif
+    then:
+      properties:
+        clocks:
+          minItems: 1
+          maxItems: 1
+        clock-names:
+          items:
+            - const: fin_pll
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5260-clock-mfc
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_aclk_mfc_333
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5260-clock-g3d
+    then:
+      properties:
+        clocks:
+          minItems: 1
+          maxItems: 1
+        clock-names:
+          items:
+            - const: fin_pll
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5260-clock-fsys
+    then:
+      properties:
+        clocks:
+          minItems: 7
+          maxItems: 7
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: phyclk_usbhost20_phy_phyclock
+            - const: phyclk_usbhost20_phy_freeclk
+            - const: phyclk_usbhost20_phy_clk48mohci
+            - const: phyclk_usbdrd30_udrd30_pipe_pclk
+            - const: phyclk_usbdrd30_udrd30_phyclock
+            - const: dout_aclk_fsys_200
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5260-clock-aud
+    then:
+      properties:
+        clocks:
+          minItems: 4
+          maxItems: 4
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: fout_aud_pll
+            - const: ioclk_i2s_cdclk
+            - const: ioclk_pcm_extclk
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5260-clock-isp
+    then:
+      properties:
+        clocks:
+          minItems: 4
+          maxItems: 4
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_aclk_isp1_266
+            - const: dout_aclk_isp1_400
+            - const: mout_aclk_isp1_266
+
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5260-clock-gscl
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_aclk_gscl_400
+            - const: dout_aclk_gscl_333
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5260-clock-disp
+    then:
+      properties:
+        clocks:
+          minItems: 19
+          maxItems: 19
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: phyclk_dptx_phy_ch3_txd_clk
+            - const: phyclk_dptx_phy_ch2_txd_clk
+            - const: phyclk_dptx_phy_ch1_txd_clk
+            - const: phyclk_dptx_phy_ch0_txd_clk
+            - const: phyclk_hdmi_phy_tmds_clko
+            - const: phyclk_hdmi_phy_ref_clko
+            - const: phyclk_hdmi_phy_pixel_clko
+            - const: phyclk_hdmi_link_o_tmds_clkhi
+            - const: phyclk_mipi_dphy_4l_m_txbyte_clkhs
+            - const: phyclk_dptx_phy_o_ref_clk_24m
+            - const: phyclk_dptx_phy_clk_div2
+            - const: phyclk_mipi_dphy_4l_m_rxclkesc0
+            - const: phyclk_hdmi_phy_ref_cko
+            - const: ioclk_spdif_extclk
+            - const: dout_aclk_peri_aud
+            - const: dout_aclk_disp_222
+            - const: dout_sclk_disp_pixel
+            - const: dout_aclk_disp_333
+      required:
+        - clock-names
+        - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5260-clk.h>
+
+    fin_pll: clock {
+        compatible = "fixed-clock";
+        clock-output-names = "fin_pll";
+        #clock-cells = <0>;
+        clock-frequency = <24000000>;
+    };
+
+    clock-controller@10010000 {
+        compatible = "samsung,exynos5260-clock-top";
+        reg = <0x10010000 0x10000>;
+        #clock-cells = <1>;
+        clocks = <&fin_pll>,
+                 <&clock_mif MIF_DOUT_MEM_PLL>,
+                 <&clock_mif MIF_DOUT_BUS_PLL>,
+                 <&clock_mif MIF_DOUT_MEDIA_PLL>;
+        clock-names = "fin_pll",
+                      "dout_mem_pll",
+                      "dout_bus_pll",
+                      "dout_media_pll";
+    };
diff --git a/dts/Bindings/clock/samsung,exynos5410-clock.yaml b/dts/Bindings/clock/samsung,exynos5410-clock.yaml
new file mode 100644
index 0000000000..032862e9f5
--- /dev/null
+++ b/dts/Bindings/clock/samsung,exynos5410-clock.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/samsung,exynos5410-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos5410 SoC clock controller
+
+maintainers:
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+  - Tomasz Figa <tomasz.figa@gmail.com>
+
+description: |
+  Expected external clocks, defined in DTS as fixed-rate clocks with a matching
+  name::
+    - "fin_pll" - PLL input clock from XXTI
+
+  All available clocks are defined as preprocessor macros in
+  include/dt-bindings/clock/exynos5410.h header.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - samsung,exynos5410-clock
+
+  clocks:
+    description:
+      Should contain an entry specifying the root clock from external
+      oscillator supplied through XXTI or XusbXTI pin.  This clock should be
+      defined using standard clock bindings with "fin_pll" clock-output-name.
+      That clock is being passed internally to the 9 PLLs.
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - "#clock-cells"
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5410.h>
+
+    fin_pll: osc-clock {
+        compatible = "fixed-clock";
+        clock-frequency = <24000000>;
+        clock-output-names = "fin_pll";
+        #clock-cells = <0>;
+    };
+
+    clock-controller@10010000 {
+        compatible = "samsung,exynos5410-clock";
+        reg = <0x10010000 0x30000>;
+        #clock-cells = <1>;
+        clocks = <&fin_pll>;
+    };
diff --git a/dts/Bindings/clock/samsung,exynos5433-clock.yaml b/dts/Bindings/clock/samsung,exynos5433-clock.yaml
new file mode 100644
index 0000000000..edd1b4ac43
--- /dev/null
+++ b/dts/Bindings/clock/samsung,exynos5433-clock.yaml
@@ -0,0 +1,524 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/samsung,exynos5433-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos5433 SoC clock controller
+
+maintainers:
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+  - Tomasz Figa <tomasz.figa@gmail.com>
+
+description: |
+  Expected external clocks, defined in DTS as fixed-rate clocks with a matching
+  name::
+    - "oscclk" - PLL input clock from XXTI
+
+  All available clocks are defined as preprocessor macros in
+  include/dt-bindings/clock/exynos5433.h header.
+
+properties:
+  compatible:
+    enum:
+        # CMU_TOP which generates clocks for
+        # IMEM/FSYS/G3D/GSCL/HEVC/MSCL/G2D/MFC/PERIC/PERIS domains and bus
+        # clocks
+      - samsung,exynos5433-cmu-top
+        # CMU_CPIF which generates clocks for LLI (Low Latency Interface) IP
+      - samsung,exynos5433-cmu-cpif
+        # CMU_MIF which generates clocks for DRAM Memory Controller domain
+      - samsung,exynos5433-cmu-mif
+        # CMU_PERIC which generates clocks for
+        # UART/I2C/SPI/I2S/PCM/SPDIF/PWM/SLIMBUS IPs
+      - samsung,exynos5433-cmu-peric
+        # CMU_PERIS which generates clocks for PMU/TMU/MCT/WDT/RTC/SECKEY/TZPC IPs
+      - samsung,exynos5433-cmu-peris
+        # CMU_FSYS which generates clocks for USB/UFS/SDMMC/TSI/PDMA IPs
+      - samsung,exynos5433-cmu-fsys
+      - samsung,exynos5433-cmu-g2d
+        # CMU_DISP which generates clocks for Display (DECON/HDMI/DSIM/MIXER) IPs
+      - samsung,exynos5433-cmu-disp
+      - samsung,exynos5433-cmu-aud
+      - samsung,exynos5433-cmu-bus0
+      - samsung,exynos5433-cmu-bus1
+      - samsung,exynos5433-cmu-bus2
+      - samsung,exynos5433-cmu-g3d
+      - samsung,exynos5433-cmu-gscl
+      - samsung,exynos5433-cmu-apollo
+        # CMU_ATLAS which generates clocks for Cortex-A57 Quad-core processor,
+        # CoreSight and  L2 cache controller
+      - samsung,exynos5433-cmu-atlas
+        # CMU_MSCL which generates clocks for M2M (Memory to Memory) scaler and
+        # JPEG IPs
+      - samsung,exynos5433-cmu-mscl
+      - samsung,exynos5433-cmu-mfc
+      - samsung,exynos5433-cmu-hevc
+        # CMU_ISP which generates clocks for FIMC-ISP/DRC/SCLC/DIS/3DNR IPs
+      - samsung,exynos5433-cmu-isp
+        # CMU_CAM0 which generates clocks for
+        # MIPI_CSIS{0|1}/FIMC_LITE_{A|B|D}/FIMC_3AA{0|1} IPs
+      - samsung,exynos5433-cmu-cam0
+        # CMU_CAM1 which generates clocks for
+        # Cortex-A5/MIPI_CSIS2/FIMC-LITE_C/FIMC-FD IPs
+      - samsung,exynos5433-cmu-cam1
+        # CMU_IMEM which generates clocks for SSS (Security SubSystem) and
+        # SlimSSS IPs
+      - samsung,exynos5433-cmu-imem
+
+  clocks:
+    minItems: 1
+    maxItems: 10
+
+  clock-names:
+    minItems: 1
+    maxItems: 10
+
+  "#clock-cells":
+    const: 1
+
+  power-domains:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - "#clock-cells"
+  - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-top
+    then:
+      properties:
+        clocks:
+          minItems: 4
+          maxItems: 4
+        clock-names:
+          items:
+            - const: oscclk
+            - const: sclk_mphy_pll
+            - const: sclk_mfc_pll
+            - const: sclk_bus_pll
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-cpif
+    then:
+      properties:
+        clocks:
+          minItems: 1
+          maxItems: 1
+        clock-names:
+          items:
+            - const: oscclk
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-mif
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: oscclk
+            - const: sclk_mphy_pll
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-fsys
+    then:
+      properties:
+        clocks:
+          minItems: 10
+          maxItems: 10
+        clock-names:
+          items:
+            - const: oscclk
+            - const: sclk_ufs_mphy
+            - const: aclk_fsys_200
+            - const: sclk_pcie_100_fsys
+            - const: sclk_ufsunipro_fsys
+            - const: sclk_mmc2_fsys
+            - const: sclk_mmc1_fsys
+            - const: sclk_mmc0_fsys
+            - const: sclk_usbhost30_fsys
+            - const: sclk_usbdrd30_fsys
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-g2d
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          items:
+            - const: oscclk
+            - const: aclk_g2d_266
+            - const: aclk_g2d_400
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-disp
+    then:
+      properties:
+        clocks:
+          minItems: 9
+          maxItems: 9
+        clock-names:
+          items:
+            - const: oscclk
+            - const: sclk_dsim1_disp
+            - const: sclk_dsim0_disp
+            - const: sclk_dsd_disp
+            - const: sclk_decon_tv_eclk_disp
+            - const: sclk_decon_vclk_disp
+            - const: sclk_decon_eclk_disp
+            - const: sclk_decon_tv_vclk_disp
+            - const: aclk_disp_333
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-aud
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: oscclk
+            - const: fout_aud_pll
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-bus0
+    then:
+      properties:
+        clocks:
+          minItems: 1
+          maxItems: 1
+        clock-names:
+          items:
+            - const: aclk_bus0_400
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-bus1
+    then:
+      properties:
+        clocks:
+          minItems: 1
+          maxItems: 1
+        clock-names:
+          items:
+            - const: aclk_bus1_400
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-bus2
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: oscclk
+            - const: aclk_bus2_400
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-g3d
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: oscclk
+            - const: aclk_g3d_400
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-gscl
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          items:
+            - const: oscclk
+            - const: aclk_gscl_111
+            - const: aclk_gscl_333
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-apollo
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: oscclk
+            - const: sclk_bus_pll_apollo
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-atlas
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: oscclk
+            - const: sclk_bus_pll_atlas
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-mscl
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          items:
+            - const: oscclk
+            - const: sclk_jpeg_mscl
+            - const: aclk_mscl_400
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-mfc
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: oscclk
+            - const: aclk_mfc_400
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-hevc
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: oscclk
+            - const: aclk_hevc_400
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-isp
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          items:
+            - const: oscclk
+            - const: aclk_isp_dis_400
+            - const: aclk_isp_400
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-cam0
+    then:
+      properties:
+        clocks:
+          minItems: 4
+          maxItems: 4
+        clock-names:
+          items:
+            - const: oscclk
+            - const: aclk_cam0_333
+            - const: aclk_cam0_400
+            - const: aclk_cam0_552
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-cam1
+    then:
+      properties:
+        clocks:
+          minItems: 7
+          maxItems: 7
+        clock-names:
+          items:
+            - const: oscclk
+            - const: sclk_isp_uart_cam1
+            - const: sclk_isp_spi1_cam1
+            - const: sclk_isp_spi0_cam1
+            - const: aclk_cam1_333
+            - const: aclk_cam1_400
+            - const: aclk_cam1_552
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-imem
+    then:
+      properties:
+        clocks:
+          minItems: 4
+          maxItems: 4
+        clock-names:
+          items:
+            - const: oscclk
+            - const: aclk_imem_sssx_266
+            - const: aclk_imem_266
+            - const: aclk_imem_200
+      required:
+        - clock-names
+        - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5433.h>
+    xxti: clock {
+        compatible = "fixed-clock";
+        clock-output-names = "oscclk";
+        #clock-cells = <0>;
+        clock-frequency = <24000000>;
+    };
+
+    clock-controller@10030000 {
+        compatible = "samsung,exynos5433-cmu-top";
+        reg = <0x10030000 0x1000>;
+        #clock-cells = <1>;
+
+        clock-names = "oscclk",
+                      "sclk_mphy_pll",
+                      "sclk_mfc_pll",
+                      "sclk_bus_pll";
+        clocks = <&xxti>,
+                 <&cmu_cpif CLK_SCLK_MPHY_PLL>,
+                 <&cmu_mif CLK_SCLK_MFC_PLL>,
+                 <&cmu_mif CLK_SCLK_BUS_PLL>;
+    };
diff --git a/dts/Bindings/clock/samsung,exynos7-clock.yaml b/dts/Bindings/clock/samsung,exynos7-clock.yaml
new file mode 100644
index 0000000000..599baf0b72
--- /dev/null
+++ b/dts/Bindings/clock/samsung,exynos7-clock.yaml
@@ -0,0 +1,272 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/samsung,exynos7-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos7 SoC clock controller
+
+maintainers:
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+  - Tomasz Figa <tomasz.figa@gmail.com>
+
+description: |
+  Expected external clocks, defined in DTS as fixed-rate clocks with a matching
+  name::
+    - "fin_pll" - PLL input clock from XXTI
+
+  All available clocks are defined as preprocessor macros in
+  include/dt-bindings/clock/exynos7-clk.h header.
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynos7-clock-topc
+      - samsung,exynos7-clock-top0
+      - samsung,exynos7-clock-top1
+      - samsung,exynos7-clock-ccore
+      - samsung,exynos7-clock-peric0
+      - samsung,exynos7-clock-peric1
+      - samsung,exynos7-clock-peris
+      - samsung,exynos7-clock-fsys0
+      - samsung,exynos7-clock-fsys1
+      - samsung,exynos7-clock-mscl
+      - samsung,exynos7-clock-aud
+
+  clocks:
+    minItems: 1
+    maxItems: 13
+
+  clock-names:
+    minItems: 1
+    maxItems: 13
+
+  "#clock-cells":
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - "#clock-cells"
+  - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7-clock-top0
+    then:
+      properties:
+        clocks:
+          minItems: 6
+          maxItems: 6
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_sclk_bus0_pll
+            - const: dout_sclk_bus1_pll
+            - const: dout_sclk_cc_pll
+            - const: dout_sclk_mfc_pll
+            - const: dout_sclk_aud_pll
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7-clock-top1
+    then:
+      properties:
+        clocks:
+          minItems: 5
+          maxItems: 5
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_sclk_bus0_pll
+            - const: dout_sclk_bus1_pll
+            - const: dout_sclk_cc_pll
+            - const: dout_sclk_mfc_pll
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7-clock-ccore
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_aclk_ccore_133
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7-clock-peric0
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_aclk_peric0_66
+            - const: sclk_uart0
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7-clock-peric1
+    then:
+      properties:
+        clocks:
+          minItems: 13
+          maxItems: 13
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_aclk_peric1_66
+            - const: sclk_uart1
+            - const: sclk_uart2
+            - const: sclk_uart3
+            - const: sclk_spi0
+            - const: sclk_spi1
+            - const: sclk_spi2
+            - const: sclk_spi3
+            - const: sclk_spi4
+            - const: sclk_i2s1
+            - const: sclk_pcm1
+            - const: sclk_spdif
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7-clock-peris
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_aclk_peris_66
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7-clock-fsys0
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_aclk_fsys0_200
+            - const: dout_sclk_mmc2
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7-clock-fsys1
+    then:
+      properties:
+        clocks:
+          minItems: 7
+          maxItems: 7
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_aclk_fsys1_200
+            - const: dout_sclk_mmc0
+            - const: dout_sclk_mmc1
+            - const: dout_sclk_ufsunipro20
+            - const: dout_sclk_phy_fsys1
+            - const: dout_sclk_phy_fsys1_26m
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7-clock-aud
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: fout_aud_pll
+      required:
+        - clock-names
+        - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos7-clk.h>
+
+    fin_pll: clock {
+        compatible = "fixed-clock";
+        clock-output-names = "fin_pll";
+        #clock-cells = <0>;
+        clock-frequency = <24000000>;
+    };
+
+    clock-controller@105e0000 {
+        compatible = "samsung,exynos7-clock-top1";
+        reg = <0x105e0000 0xb000>;
+        #clock-cells = <1>;
+        clocks = <&fin_pll>,
+                 <&clock_topc DOUT_SCLK_BUS0_PLL>,
+                 <&clock_topc DOUT_SCLK_BUS1_PLL>,
+                 <&clock_topc DOUT_SCLK_CC_PLL>,
+                 <&clock_topc DOUT_SCLK_MFC_PLL>;
+        clock-names = "fin_pll",
+                      "dout_sclk_bus0_pll",
+                      "dout_sclk_bus1_pll",
+                      "dout_sclk_cc_pll",
+                      "dout_sclk_mfc_pll";
+    };
diff --git a/dts/Bindings/clock/samsung,exynos7885-clock.yaml b/dts/Bindings/clock/samsung,exynos7885-clock.yaml
new file mode 100644
index 0000000000..7e5a9cac2f
--- /dev/null
+++ b/dts/Bindings/clock/samsung,exynos7885-clock.yaml
@@ -0,0 +1,166 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/samsung,exynos7885-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos7885 SoC clock controller
+
+maintainers:
+  - Dávid Virág <virag.david003@gmail.com>
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+  - Tomasz Figa <tomasz.figa@gmail.com>
+
+description: |
+  Exynos7885 clock controller is comprised of several CMU units, generating
+  clocks for different domains. Those CMU units are modeled as separate device
+  tree nodes, and might depend on each other. The root clock in that root tree
+  is an external clock: OSCCLK (26 MHz). This external clock must be defined
+  as a fixed-rate clock in dts.
+
+  CMU_TOP is a top-level CMU, where all base clocks are prepared using PLLs and
+  dividers; all other leaf clocks (other CMUs) are usually derived from CMU_TOP.
+
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All clocks available for usage
+  in clock consumer nodes are defined as preprocessor macros in
+  'dt-bindings/clock/exynos7885.h' header.
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynos7885-cmu-top
+      - samsung,exynos7885-cmu-core
+      - samsung,exynos7885-cmu-peri
+
+  clocks:
+    minItems: 1
+    maxItems: 10
+
+  clock-names:
+    minItems: 1
+    maxItems: 10
+
+  "#clock-cells":
+    const: 1
+
+  reg:
+    maxItems: 1
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7885-cmu-top
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+
+        clock-names:
+          items:
+            - const: oscclk
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7885-cmu-core
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_CORE bus clock (from CMU_TOP)
+            - description: CCI clock (from CMU_TOP)
+            - description: G3D clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_core_bus
+            - const: dout_core_cci
+            - const: dout_core_g3d
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7885-cmu-peri
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_PERI bus clock (from CMU_TOP)
+            - description: SPI0 clock (from CMU_TOP)
+            - description: SPI1 clock (from CMU_TOP)
+            - description: UART0 clock (from CMU_TOP)
+            - description: UART1 clock (from CMU_TOP)
+            - description: UART2 clock (from CMU_TOP)
+            - description: USI0 clock (from CMU_TOP)
+            - description: USI1 clock (from CMU_TOP)
+            - description: USI2 clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_peri_bus
+            - const: dout_peri_spi0
+            - const: dout_peri_spi1
+            - const: dout_peri_uart0
+            - const: dout_peri_uart1
+            - const: dout_peri_uart2
+            - const: dout_peri_usi0
+            - const: dout_peri_usi1
+            - const: dout_peri_usi2
+
+required:
+  - compatible
+  - "#clock-cells"
+  - clocks
+  - clock-names
+  - reg
+
+additionalProperties: false
+
+examples:
+  # Clock controller node for CMU_PERI
+  - |
+    #include <dt-bindings/clock/exynos7885.h>
+
+    cmu_peri: clock-controller@10010000 {
+        compatible = "samsung,exynos7885-cmu-peri";
+        reg = <0x10010000 0x8000>;
+        #clock-cells = <1>;
+
+        clocks = <&oscclk>,
+                 <&cmu_top CLK_DOUT_PERI_BUS>,
+                 <&cmu_top CLK_DOUT_PERI_SPI0>,
+                 <&cmu_top CLK_DOUT_PERI_SPI1>,
+                 <&cmu_top CLK_DOUT_PERI_UART0>,
+                 <&cmu_top CLK_DOUT_PERI_UART1>,
+                 <&cmu_top CLK_DOUT_PERI_UART2>,
+                 <&cmu_top CLK_DOUT_PERI_USI0>,
+                 <&cmu_top CLK_DOUT_PERI_USI1>,
+                 <&cmu_top CLK_DOUT_PERI_USI2>;
+        clock-names = "oscclk",
+                      "dout_peri_bus",
+                      "dout_peri_spi0",
+                      "dout_peri_spi1",
+                      "dout_peri_uart0",
+                      "dout_peri_uart1",
+                      "dout_peri_uart2",
+                      "dout_peri_usi0",
+                      "dout_peri_usi1",
+                      "dout_peri_usi2";
+    };
+
+...
diff --git a/dts/Bindings/clock/samsung,exynos850-clock.yaml b/dts/Bindings/clock/samsung,exynos850-clock.yaml
index 7f8c91a29b..80ba60838f 100644
--- a/dts/Bindings/clock/samsung,exynos850-clock.yaml
+++ b/dts/Bindings/clock/samsung,exynos850-clock.yaml
@@ -32,6 +32,8 @@ properties:
   compatible:
     enum:
       - samsung,exynos850-cmu-top
+      - samsung,exynos850-cmu-apm
+      - samsung,exynos850-cmu-cmgp
       - samsung,exynos850-cmu-core
       - samsung,exynos850-cmu-dpu
       - samsung,exynos850-cmu-hsi
@@ -72,6 +74,42 @@ allOf:
       properties:
         compatible:
           contains:
+            const: samsung,exynos850-cmu-apm
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_APM bus clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_clkcmu_apm_bus
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos850-cmu-cmgp
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_CMGP bus clock (from CMU_APM)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: gout_clkcmu_cmgp_bus
+
+  - if:
+      properties:
+        compatible:
+          contains:
             const: samsung,exynos850-cmu-core
 
     then:
diff --git a/dts/Bindings/clock/samsung,s5pv210-clock.txt b/dts/Bindings/clock/samsung,s5pv210-clock.txt
deleted file mode 100644
index a86c83bf9d..0000000000
--- a/dts/Bindings/clock/samsung,s5pv210-clock.txt
+++ /dev/null
@@ -1,77 +0,0 @@
-* Samsung S5P6442/S5PC110/S5PV210 Clock Controller
-
-Samsung S5P6442, S5PC110 and S5PV210 SoCs contain integrated clock
-controller, which generates and supplies clock to various controllers
-within the SoC.
-
-Required Properties:
-
-- compatible: should be one of following:
-	- "samsung,s5pv210-clock" : for clock controller of Samsung
-	  S5PC110/S5PV210 SoCs,
-	- "samsung,s5p6442-clock" : for clock controller of Samsung
-	  S5P6442 SoC.
-
-- reg: physical base address of the controller and length of memory mapped
-  region.
-
-- #clock-cells: should be 1.
-
-All available clocks are defined as preprocessor macros in
-dt-bindings/clock/s5pv210.h header and can be used in device tree sources.
-
-External clocks:
-
-There are several clocks that are generated outside the SoC. It is expected
-that they are defined using standard clock bindings with following
-clock-output-names:
- - "xxti": external crystal oscillator connected to XXTI and XXTO pins of
-the SoC,
- - "xusbxti": external crystal oscillator connected to XUSBXTI and XUSBXTO
-pins of the SoC,
-
-A subset of above clocks available on given board shall be specified in
-board device tree, including the system base clock, as selected by XOM[0]
-pin of the SoC. Refer to generic fixed rate clock bindings
-documentation[1] for more information how to specify these clocks.
-
-[1] Documentation/devicetree/bindings/clock/fixed-clock.yaml
-
-Example: Clock controller node:
-
-	clock: clock-controller@7e00f000 {
-		compatible = "samsung,s5pv210-clock";
-		reg = <0x7e00f000 0x1000>;
-		#clock-cells = <1>;
-	};
-
-Example: Required external clocks:
-
-	xxti: clock-xxti {
-		compatible = "fixed-clock";
-		clock-output-names = "xxti";
-		clock-frequency = <24000000>;
-		#clock-cells = <0>;
-	};
-
-	xusbxti: clock-xusbxti {
-		compatible = "fixed-clock";
-		clock-output-names = "xusbxti";
-		clock-frequency = <24000000>;
-		#clock-cells = <0>;
-	};
-
-Example: UART controller node that consumes the clock generated by the clock
-  controller (refer to the standard clock bindings for information about
-  "clocks" and "clock-names" properties):
-
-	uart0: serial@e2900000 {
-		compatible = "samsung,s5pv210-uart";
-		reg = <0xe2900000 0x400>;
-		interrupt-parent = <&vic1>;
-		interrupts = <10>;
-		clock-names = "uart", "clk_uart_baud0",
-				"clk_uart_baud1";
-		clocks = <&clocks UART0>, <&clocks UART0>,
-				<&clocks SCLK_UART0>;
-	};
diff --git a/dts/Bindings/clock/samsung,s5pv210-clock.yaml b/dts/Bindings/clock/samsung,s5pv210-clock.yaml
new file mode 100644
index 0000000000..dcb29a2d11
--- /dev/null
+++ b/dts/Bindings/clock/samsung,s5pv210-clock.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/samsung,s5pv210-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S5P6442/S5PC110/S5PV210 SoC clock controller
+
+maintainers:
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+  - Tomasz Figa <tomasz.figa@gmail.com>
+
+description: |
+  Expected external clocks, defined in DTS as fixed-rate clocks with a matching
+  name::
+    - "xxti" - external crystal oscillator connected to XXTI and XXTO pins of
+      the SoC,
+    - "xusbxti" - external crystal oscillator connected to XUSBXTI and XUSBXTO
+      pins of the SoC,
+
+  All available clocks are defined as preprocessor macros in
+  include/dt-bindings/clock/s5pv210.h header.
+
+properties:
+  compatible:
+    enum:
+      - samsung,s5pv210-clock
+      - samsung,s5p6442-clock
+
+  clocks:
+    items:
+      - description: xxti clock
+      - description: xusbxti clock
+
+  clock-names:
+    items:
+      - const: xxti
+      - const: xusbxti
+
+  "#clock-cells":
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - "#clock-cells"
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/s5pv210.h>
+
+    xxti: clock-0 {
+        compatible = "fixed-clock";
+        clock-frequency = <0>;
+        clock-output-names = "xxti";
+        #clock-cells = <0>;
+    };
+
+    xusbxti: clock-1 {
+        compatible = "fixed-clock";
+        clock-frequency = <0>;
+        clock-output-names = "xusbxti";
+        #clock-cells = <0>;
+    };
+
+    clock-controller@e0100000 {
+        compatible = "samsung,s5pv210-clock";
+        reg = <0xe0100000 0x10000>;
+        clock-names = "xxti", "xusbxti";
+        clocks = <&xxti>, <&xusbxti>;
+        #clock-cells = <1>;
+    };
diff --git a/dts/Bindings/clock/starfive,jh7100-clkgen.yaml b/dts/Bindings/clock/starfive,jh7100-clkgen.yaml
new file mode 100644
index 0000000000..12f17b60ec
--- /dev/null
+++ b/dts/Bindings/clock/starfive,jh7100-clkgen.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/starfive,jh7100-clkgen.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive JH7100 Clock Generator
+
+maintainers:
+  - Geert Uytterhoeven <geert@linux-m68k.org>
+  - Emil Renner Berthing <kernel@esmil.dk>
+
+properties:
+  compatible:
+    const: starfive,jh7100-clkgen
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Main clock source (25 MHz)
+      - description: Application-specific clock source (12-27 MHz)
+      - description: RMII reference clock (50 MHz)
+      - description: RGMII RX clock (125 MHz)
+
+  clock-names:
+    items:
+      - const: osc_sys
+      - const: osc_aud
+      - const: gmac_rmii_ref
+      - const: gmac_gr_mii_rxclk
+
+  '#clock-cells':
+    const: 1
+    description:
+      See <dt-bindings/clock/starfive-jh7100.h> for valid indices.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@11800000 {
+            compatible = "starfive,jh7100-clkgen";
+            reg = <0x11800000 0x10000>;
+            clocks = <&osc_sys>, <&osc_aud>, <&gmac_rmii_ref>, <&gmac_gr_mii_rxclk>;
+            clock-names = "osc_sys", "osc_aud", "gmac_rmii_ref", "gmac_gr_mii_rxclk";
+            #clock-cells = <1>;
+    };
diff --git a/dts/Bindings/clock/toshiba,tmpv770x-pipllct.yaml b/dts/Bindings/clock/toshiba,tmpv770x-pipllct.yaml
new file mode 100644
index 0000000000..7b7300ce96
--- /dev/null
+++ b/dts/Bindings/clock/toshiba,tmpv770x-pipllct.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/toshiba,tmpv770x-pipllct.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Toshiba Visconti5 TMPV770X PLL Controller Device Tree Bindings
+
+maintainers:
+  - Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
+
+description:
+  Toshia Visconti5 PLL controller which supports the PLLs on TMPV770X.
+
+properties:
+  compatible:
+    const: toshiba,tmpv7708-pipllct
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  clocks:
+    description: External reference clock (OSC2)
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+
+    osc2_clk: osc2-clk {
+      compatible = "fixed-clock";
+      clock-frequency = <20000000>;
+      #clock-cells = <0>;
+    };
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pipllct: clock-controller@24220000 {
+            compatible = "toshiba,tmpv7708-pipllct";
+            reg = <0 0x24220000 0 0x820>;
+            #clock-cells = <1>;
+            clocks = <&osc2_clk>;
+        };
+    };
+...
diff --git a/dts/Bindings/clock/toshiba,tmpv770x-pismu.yaml b/dts/Bindings/clock/toshiba,tmpv770x-pismu.yaml
new file mode 100644
index 0000000000..ed79f16fe6
--- /dev/null
+++ b/dts/Bindings/clock/toshiba,tmpv770x-pismu.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/toshiba,tmpv770x-pismu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Toshiba Visconti5 TMPV770x SMU controller Device Tree Bindings
+
+maintainers:
+  - Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
+
+description:
+  Toshia Visconti5 SMU (System Management Unit) which supports the clock
+  and resets on TMPV770x.
+
+properties:
+  compatible:
+    items:
+      - const: toshiba,tmpv7708-pismu
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pismu: syscon@24200000 {
+            compatible = "toshiba,tmpv7708-pismu", "syscon";
+            reg = <0 0x24200000 0 0x2140>;
+            #clock-cells = <1>;
+            #reset-cells = <1>;
+        };
+    };
+...
diff --git a/dts/Bindings/crypto/allwinner,sun4i-a10-crypto.yaml b/dts/Bindings/crypto/allwinner,sun4i-a10-crypto.yaml
index 0429fb774f..dedc99e34e 100644
--- a/dts/Bindings/crypto/allwinner,sun4i-a10-crypto.yaml
+++ b/dts/Bindings/crypto/allwinner,sun4i-a10-crypto.yaml
@@ -44,6 +44,16 @@ properties:
       - const: ahb
       - const: mod
 
+  dmas:
+    items:
+      - description: RX DMA Channel
+      - description: TX DMA Channel
+
+  dma-names:
+    items:
+      - const: rx
+      - const: tx
+
   resets:
     maxItems: 1
 
diff --git a/dts/Bindings/crypto/qcom,prng.txt b/dts/Bindings/crypto/qcom,prng.txt
deleted file mode 100644
index 7ee0e9eac9..0000000000
--- a/dts/Bindings/crypto/qcom,prng.txt
+++ /dev/null
@@ -1,19 +0,0 @@
-Qualcomm MSM pseudo random number generator.
-
-Required properties:
-
-- compatible  : should be "qcom,prng" for 8916 etc
-              : should be "qcom,prng-ee" for 8996 and later using EE
-		(Execution Environment) slice of prng
-- reg         : specifies base physical address and size of the registers map
-- clocks      : phandle to clock-controller plus clock-specifier pair
-- clock-names : "core" clocks all registers, FIFO and circuits in PRNG IP block
-
-Example:
-
-	rng@f9bff000 {
-		compatible = "qcom,prng";
-		reg = <0xf9bff000 0x200>;
-		clocks = <&clock GCC_PRNG_AHB_CLK>;
-		clock-names = "core";
-	};
diff --git a/dts/Bindings/crypto/qcom,prng.yaml b/dts/Bindings/crypto/qcom,prng.yaml
new file mode 100644
index 0000000000..bb42f4588b
--- /dev/null
+++ b/dts/Bindings/crypto/qcom,prng.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/qcom,prng.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Pseudo Random Number Generator
+
+maintainers:
+  - Vinod Koul <vkoul@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - qcom,prng  # 8916 etc.
+      - qcom,prng-ee  # 8996 and later using EE
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: core
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    rng@f9bff000 {
+        compatible = "qcom,prng";
+        reg = <0xf9bff000 0x200>;
+        clocks = <&clk 125>;
+        clock-names = "core";
+    };
diff --git a/dts/Bindings/display/amlogic,meson-dw-hdmi.yaml b/dts/Bindings/display/amlogic,meson-dw-hdmi.yaml
index cf5a208f2f..343598c9f4 100644
--- a/dts/Bindings/display/amlogic,meson-dw-hdmi.yaml
+++ b/dts/Bindings/display/amlogic,meson-dw-hdmi.yaml
@@ -10,6 +10,9 @@ title: Amlogic specific extensions to the Synopsys Designware HDMI Controller
 maintainers:
   - Neil Armstrong <narmstrong@baylibre.com>
 
+allOf:
+  - $ref: /schemas/sound/name-prefix.yaml#
+
 description: |
   The Amlogic Meson Synopsys Designware Integration is composed of
   - A Synopsys DesignWare HDMI Controller IP
@@ -99,6 +102,8 @@ properties:
   "#sound-dai-cells":
     const: 0
 
+  sound-name-prefix: true
+
 required:
   - compatible
   - reg
diff --git a/dts/Bindings/display/amlogic,meson-vpu.yaml b/dts/Bindings/display/amlogic,meson-vpu.yaml
index 851cb07812..047fd69e03 100644
--- a/dts/Bindings/display/amlogic,meson-vpu.yaml
+++ b/dts/Bindings/display/amlogic,meson-vpu.yaml
@@ -78,6 +78,10 @@ properties:
   interrupts:
     maxItems: 1
 
+  amlogic,canvas:
+    description: should point to a canvas provider node
+    $ref: /schemas/types.yaml#/definitions/phandle
+
   power-domains:
     maxItems: 1
     description: phandle to the associated power domain
@@ -106,6 +110,7 @@ required:
   - port@1
   - "#address-cells"
   - "#size-cells"
+  - amlogic,canvas
 
 additionalProperties: false
 
@@ -118,6 +123,7 @@ examples:
         interrupts = <3>;
         #address-cells = <1>;
         #size-cells = <0>;
+        amlogic,canvas = <&canvas>;
 
         /* CVBS VDAC output port */
         port@0 {
diff --git a/dts/Bindings/display/bridge/analogix,anx7625.yaml b/dts/Bindings/display/bridge/analogix,anx7625.yaml
index ab48ab2f42..1d3e88daca 100644
--- a/dts/Bindings/display/bridge/analogix,anx7625.yaml
+++ b/dts/Bindings/display/bridge/analogix,anx7625.yaml
@@ -43,14 +43,70 @@ properties:
   vdd33-supply:
     description: Regulator that provides the supply 3.3V power.
 
+  analogix,lane0-swing:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    minItems: 1
+    maxItems: 20
+    description:
+      an array of swing register setting for DP tx lane0 PHY.
+      Registers 0~9 are Swing0_Pre0, Swing1_Pre0, Swing2_Pre0,
+      Swing3_Pre0, Swing0_Pre1, Swing1_Pre1, Swing2_Pre1, Swing0_Pre2,
+      Swing1_Pre2, Swing0_Pre3, they are for [Boost control] and
+      [Swing control] setting.
+      Registers 0~9, bit 3:0 is [Boost control], these bits control
+      post cursor manual, increase the [Boost control] to increase
+      Pre-emphasis value.
+      Registers 0~9, bit 6:4 is [Swing control], these bits control
+      swing manual, increase [Swing control] setting to add Vp-p value
+      for each Swing, Pre.
+      Registers 10~19 are Swing0_Pre0, Swing1_Pre0, Swing2_Pre0,
+      Swing3_Pre0, Swing0_Pre1, Swing1_Pre1, Swing2_Pre1, Swing0_Pre2,
+      Swing1_Pre2, Swing0_Pre3, they are for [R select control] and
+      [R Termination control] setting.
+      Registers 10~19, bit 4:0 is [R select control], these bits are
+      compensation manual, increase it can enhance IO driven strength
+      and Vp-p.
+      Registers 10~19, bit 5:6 is [R termination control], these bits
+      adjust 50ohm impedance of DP tx termination. 00:55 ohm,
+      01:50 ohm(default), 10:45 ohm, 11:40 ohm.
+
+  analogix,lane1-swing:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    minItems: 1
+    maxItems: 20
+    description:
+      an array of swing register setting for DP tx lane1 PHY.
+      DP TX lane1 swing register setting same with lane0
+      swing, please refer lane0-swing property description.
+
+  analogix,audio-enable:
+    type: boolean
+    description: let the driver enable audio HDMI codec function or not.
+
   ports:
     $ref: /schemas/graph.yaml#/properties/ports
 
     properties:
       port@0:
-        $ref: /schemas/graph.yaml#/properties/port
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
         description:
-          Video port for MIPI DSI input.
+          MIPI DSI/DPI input.
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            type: object
+            additionalProperties: false
+
+            properties:
+              remote-endpoint: true
+
+              bus-type:
+                enum: [1, 5]
+                default: 1
+
+              data-lanes: true
 
       port@1:
         $ref: /schemas/graph.yaml#/properties/port
@@ -87,6 +143,9 @@ examples:
             vdd10-supply = <&pp1000_mipibrdg>;
             vdd18-supply = <&pp1800_mipibrdg>;
             vdd33-supply = <&pp3300_mipibrdg>;
+            analogix,audio-enable;
+            analogix,lane0-swing = /bits/ 8 <0x14 0x54 0x64 0x74>;
+            analogix,lane1-swing = /bits/ 8 <0x14 0x54 0x64 0x74>;
 
             ports {
                 #address-cells = <1>;
@@ -96,6 +155,8 @@ examples:
                     reg = <0>;
                     anx7625_in: endpoint {
                         remote-endpoint = <&mipi_dsi>;
+                        bus-type = <5>;
+                        data-lanes = <0 1 2 3>;
                     };
                 };
 
diff --git a/dts/Bindings/display/bridge/analogix,anx7814.yaml b/dts/Bindings/display/bridge/analogix,anx7814.yaml
index 8e13f27b28..bce96b5b0d 100644
--- a/dts/Bindings/display/bridge/analogix,anx7814.yaml
+++ b/dts/Bindings/display/bridge/analogix,anx7814.yaml
@@ -7,7 +7,9 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Analogix ANX7814 SlimPort (Full-HD Transmitter)
 
 maintainers:
-  - Enric Balletbo i Serra <enric.balletbo@collabora.com>
+  - Andrzej Hajda <andrzej.hajda@intel.com>
+  - Neil Armstrong <narmstrong@baylibre.com>
+  - Robert Foss <robert.foss@linaro.org>
 
 properties:
   compatible:
diff --git a/dts/Bindings/display/bridge/google,cros-ec-anx7688.yaml b/dts/Bindings/display/bridge/google,cros-ec-anx7688.yaml
index 9f7cc6b757..a88a5d8c7b 100644
--- a/dts/Bindings/display/bridge/google,cros-ec-anx7688.yaml
+++ b/dts/Bindings/display/bridge/google,cros-ec-anx7688.yaml
@@ -8,7 +8,6 @@ title: ChromeOS EC ANX7688 HDMI to DP Converter through Type-C Port
 
 maintainers:
   - Nicolas Boichat <drinkcat@chromium.org>
-  - Enric Balletbo i Serra <enric.balletbo@collabora.com>
 
 description: |
   ChromeOS EC ANX7688 is a display bridge that converts HDMI 2.0 to
diff --git a/dts/Bindings/display/bridge/lvds-codec.yaml b/dts/Bindings/display/bridge/lvds-codec.yaml
index 1faae3e323..5079c1cc33 100644
--- a/dts/Bindings/display/bridge/lvds-codec.yaml
+++ b/dts/Bindings/display/bridge/lvds-codec.yaml
@@ -79,6 +79,14 @@ properties:
       - port@0
       - port@1
 
+  pclk-sample:
+    description:
+      Data sampling on rising or falling edge.
+    enum:
+      - 0  # Falling edge
+      - 1  # Rising edge
+    default: 0
+
   powerdown-gpios:
     description:
       The GPIO used to control the power down line of this device.
@@ -86,21 +94,32 @@ properties:
 
   power-supply: true
 
-if:
-  not:
-    properties:
-      compatible:
-        contains:
-          const: lvds-decoder
-then:
-  properties:
-    ports:
+allOf:
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              const: lvds-decoder
+    then:
       properties:
-        port@0:
+        ports:
           properties:
-            endpoint:
+            port@0:
               properties:
-                data-mapping: false
+                endpoint:
+                  properties:
+                    data-mapping: false
+
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              const: lvds-encoder
+    then:
+      properties:
+        pclk-sample: false
 
 required:
   - compatible
diff --git a/dts/Bindings/display/bridge/nxp,ptn3460.yaml b/dts/Bindings/display/bridge/nxp,ptn3460.yaml
new file mode 100644
index 0000000000..107dd138e6
--- /dev/null
+++ b/dts/Bindings/display/bridge/nxp,ptn3460.yaml
@@ -0,0 +1,106 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/nxp,ptn3460.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP PTN3460 eDP to LVDS bridge
+
+maintainers:
+  - Sean Paul <seanpaul@chromium.org>
+
+properties:
+  compatible:
+    const: nxp,ptn3460
+
+  reg:
+    description: I2C address of the bridge
+    maxItems: 1
+
+  edid-emulation:
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    description:
+      The EDID emulation entry to use
+      Value  Resolution  Description
+        0     1024x768   NXP Generic
+        1     1920x1080  NXP Generic
+        2     1920x1080  NXP Generic
+        3     1600x900   Samsung LTM200KT
+        4     1920x1080  Samsung LTM230HT
+        5     1366x768   NXP Generic
+        6     1600x900   ChiMei M215HGE
+    enum: [0, 1, 2, 3, 4, 5, 6]
+
+  powerdown-gpios:
+    description: GPIO connected to the PD_N signal.
+    maxItems: 1
+
+  reset-gpios:
+    description: GPIO connected to the RST_N signal.
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Video port for LVDS output
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Video port for eDP input
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - edid-emulation
+  - powerdown-gpios
+  - reset-gpios
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c1 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      bridge@20 {
+        compatible = "nxp,ptn3460";
+        reg = <0x20>;
+        edid-emulation = <5>;
+        powerdown-gpios = <&gpy2 5 GPIO_ACTIVE_HIGH>;
+        reset-gpios = <&gpx1 5 GPIO_ACTIVE_LOW>;
+
+        ports {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          port@0 {
+            reg = <0>;
+            bridge_out: endpoint {
+              remote-endpoint = <&panel_in>;
+            };
+          };
+
+          port@1 {
+            reg = <1>;
+            bridge_in: endpoint {
+              remote-endpoint = <&dp_out>;
+            };
+          };
+        };
+      };
+    };
+
+...
diff --git a/dts/Bindings/display/bridge/ps8640.yaml b/dts/Bindings/display/bridge/ps8640.yaml
index cdaf7a7a8f..186e17be51 100644
--- a/dts/Bindings/display/bridge/ps8640.yaml
+++ b/dts/Bindings/display/bridge/ps8640.yaml
@@ -8,7 +8,6 @@ title: MIPI DSI to eDP Video Format Converter Device Tree Bindings
 
 maintainers:
   - Nicolas Boichat <drinkcat@chromium.org>
-  - Enric Balletbo i Serra <enric.balletbo@collabora.com>
 
 description: |
   The PS8640 is a low power MIPI-to-eDP video format converter supporting
diff --git a/dts/Bindings/display/bridge/ptn3460.txt b/dts/Bindings/display/bridge/ptn3460.txt
deleted file mode 100644
index 361971ba10..0000000000
--- a/dts/Bindings/display/bridge/ptn3460.txt
+++ /dev/null
@@ -1,39 +0,0 @@
-ptn3460 bridge bindings
-
-Required properties:
-	- compatible: "nxp,ptn3460"
-	- reg: i2c address of the bridge
-	- powerdown-gpio: OF device-tree gpio specification  for PD_N pin.
-	- reset-gpio: OF device-tree gpio specification for RST_N pin.
-	- edid-emulation: The EDID emulation entry to use
-		+-------+------------+------------------+
-		| Value | Resolution | Description      |
-		|   0   |  1024x768  | NXP Generic      |
-		|   1   |  1920x1080 | NXP Generic      |
-		|   2   |  1920x1080 | NXP Generic      |
-		|   3   |  1600x900  | Samsung LTM200KT |
-		|   4   |  1920x1080 | Samsung LTM230HT |
-		|   5   |  1366x768  | NXP Generic      |
-		|   6   |  1600x900  | ChiMei M215HGE   |
-		+-------+------------+------------------+
-
-	- video interfaces: Device node can contain video interface port
-			    nodes for panel according to [1].
-
-[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
-
-Example:
-	lvds-bridge@20 {
-		compatible = "nxp,ptn3460";
-		reg = <0x20>;
-		powerdown-gpio = <&gpy2 5 1 0 0>;
-		reset-gpio = <&gpx1 5 1 0 0>;
-		edid-emulation = <5>;
-		ports {
-			port@0 {
-				bridge_out: endpoint {
-					remote-endpoint = <&panel_in>;
-				};
-			};
-		};
-	};
diff --git a/dts/Bindings/display/bridge/renesas,dsi-csi2-tx.yaml b/dts/Bindings/display/bridge/renesas,dsi-csi2-tx.yaml
new file mode 100644
index 0000000000..afeeb96739
--- /dev/null
+++ b/dts/Bindings/display/bridge/renesas,dsi-csi2-tx.yaml
@@ -0,0 +1,118 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/renesas,dsi-csi2-tx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car MIPI DSI/CSI-2 Encoder
+
+maintainers:
+  - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
+
+description: |
+  This binding describes the MIPI DSI/CSI-2 encoder embedded in the Renesas
+  R-Car V3U SoC. The encoder can operate in either DSI or CSI-2 mode, with up
+  to four data lanes.
+
+properties:
+  compatible:
+    enum:
+      - renesas,r8a779a0-dsi-csi2-tx    # for V3U
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Functional clock
+      - description: DSI (and CSI-2) functional clock
+      - description: PLL reference clock
+
+  clock-names:
+    items:
+      - const: fck
+      - const: dsi
+      - const: pll
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Parallel input port
+
+      port@1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: DSI/CSI-2 output port
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - data-lanes
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - power-domains
+  - resets
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a779a0-cpg-mssr.h>
+    #include <dt-bindings/power/r8a779a0-sysc.h>
+
+    dsi0: dsi-encoder@fed80000 {
+        compatible = "renesas,r8a779a0-dsi-csi2-tx";
+        reg = <0xfed80000 0x10000>;
+        power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+        clocks = <&cpg CPG_MOD 415>,
+                 <&cpg CPG_CORE R8A779A0_CLK_DSI>,
+                 <&cpg CPG_CORE R8A779A0_CLK_CP>;
+        clock-names = "fck", "dsi", "pll";
+        resets = <&cpg 415>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                dsi0_in: endpoint {
+                    remote-endpoint = <&du_out_dsi0>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                dsi0_out: endpoint {
+                    data-lanes = <1 2>;
+                    remote-endpoint = <&sn65dsi86_in>;
+                };
+            };
+        };
+    };
+...
diff --git a/dts/Bindings/display/bridge/sii9234.txt b/dts/Bindings/display/bridge/sii9234.txt
deleted file mode 100644
index a55bf77bd9..0000000000
--- a/dts/Bindings/display/bridge/sii9234.txt
+++ /dev/null
@@ -1,49 +0,0 @@
-Silicon Image SiI9234 HDMI/MHL bridge bindings
-
-Required properties:
-	- compatible : "sil,sii9234".
-	- reg : I2C address for TPI interface, use 0x39
-	- avcc33-supply : MHL/USB Switch Supply Voltage (3.3V)
-	- iovcc18-supply : I/O Supply Voltage (1.8V)
-	- avcc12-supply : TMDS Analog Supply Voltage (1.2V)
-	- cvcc12-supply : Digital Core Supply Voltage (1.2V)
-	- interrupts: interrupt specifier of INT pin
-	- reset-gpios: gpio specifier of RESET pin (active low)
-	- video interfaces: Device node can contain two video interface port
-			    nodes for HDMI encoder and connector according to [1].
-			    - port@0 - MHL to HDMI
-			    - port@1 - MHL to connector
-
-[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
-
-
-Example:
-	sii9234@39 {
-		compatible = "sil,sii9234";
-		reg = <0x39>;
-		avcc33-supply = <&vcc33mhl>;
-		iovcc18-supply = <&vcc18mhl>;
-		avcc12-supply = <&vsil12>;
-		cvcc12-supply = <&vsil12>;
-		reset-gpios = <&gpf3 4 GPIO_ACTIVE_LOW>;
-		interrupt-parent = <&gpf3>;
-		interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				mhl_to_hdmi: endpoint {
-					remote-endpoint = <&hdmi_to_mhl>;
-				};
-			};
-			port@1 {
-				reg = <1>;
-				mhl_to_connector: endpoint {
-					remote-endpoint = <&connector_to_mhl>;
-				};
-			};
-		};
-	};
diff --git a/dts/Bindings/display/bridge/sil,sii9234.yaml b/dts/Bindings/display/bridge/sil,sii9234.yaml
new file mode 100644
index 0000000000..f88ddfe481
--- /dev/null
+++ b/dts/Bindings/display/bridge/sil,sii9234.yaml
@@ -0,0 +1,110 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/sil,sii9234.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Silicon Image SiI9234 HDMI/MHL bridge
+
+maintainers:
+  - Maciej Purski <m.purski@samsung.com>
+
+properties:
+  compatible:
+    const: sil,sii9234
+
+  reg:
+    description: I2C address for TPI interface
+    maxItems: 1
+
+  avcc12-supply:
+    description: TMDS Analog Supply Voltage, 1.2V
+
+  avcc33-supply:
+    description: MHL/USB Switch Supply Voltage, 3.3V
+
+  cvcc12-supply:
+    description: Digital Core Supply Voltage, 1.2V
+
+  iovcc18-supply:
+    description: I/O voltage supply, 1.8V
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    description: GPIO connected to the reset pin.
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Video port for HDMI (encoder) input
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          MHL to connector port
+
+    required:
+      - port@0
+
+required:
+  - compatible
+  - reg
+  - avcc12-supply
+  - avcc33-supply
+  - cvcc12-supply
+  - iovcc18-supply
+  - interrupts
+  - reset-gpios
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c1 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      bridge@39 {
+        compatible = "sil,sii9234";
+        reg = <0x39>;
+        avcc12-supply = <&vsil12>;
+        avcc33-supply = <&vcc33mhl>;
+        cvcc12-supply = <&vsil12>;
+        iovcc18-supply = <&vcc18mhl>;
+        interrupt-parent = <&gpf3>;
+        interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+        reset-gpios = <&gpf3 4 GPIO_ACTIVE_LOW>;
+
+        ports {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          port@0 {
+            reg = <0>;
+            mhl_to_hdmi: endpoint {
+              remote-endpoint = <&hdmi_to_mhl>;
+            };
+          };
+
+          port@1 {
+            reg = <1>;
+            mhl_to_connector: endpoint {
+              remote-endpoint = <&connector_to_mhl>;
+            };
+          };
+        };
+      };
+    };
+
+...
diff --git a/dts/Bindings/display/msm/dp-controller.yaml b/dts/Bindings/display/msm/dp-controller.yaml
index 63e585f487..5457612ab1 100644
--- a/dts/Bindings/display/msm/dp-controller.yaml
+++ b/dts/Bindings/display/msm/dp-controller.yaml
@@ -17,6 +17,8 @@ properties:
   compatible:
     enum:
       - qcom,sc7180-dp
+      - qcom,sc7280-dp
+      - qcom,sc7280-edp
       - qcom,sc8180x-dp
       - qcom,sc8180x-edp
 
diff --git a/dts/Bindings/display/msm/dpu-sdm845.yaml b/dts/Bindings/display/msm/dpu-sdm845.yaml
index b4ea7c92fb..0dca4b3d66 100644
--- a/dts/Bindings/display/msm/dpu-sdm845.yaml
+++ b/dts/Bindings/display/msm/dpu-sdm845.yaml
@@ -31,13 +31,11 @@ properties:
   clocks:
     items:
       - description: Display AHB clock from gcc
-      - description: Display AXI clock
       - description: Display core clock
 
   clock-names:
     items:
       - const: iface
-      - const: bus
       - const: core
 
   interrupts:
@@ -160,9 +158,8 @@ examples:
           power-domains = <&dispcc MDSS_GDSC>;
 
           clocks = <&gcc GCC_DISP_AHB_CLK>,
-                   <&gcc GCC_DISP_AXI_CLK>,
                    <&dispcc DISP_CC_MDSS_MDP_CLK>;
-          clock-names = "iface", "bus", "core";
+          clock-names = "iface", "core";
 
           interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
           interrupt-controller;
diff --git a/dts/Bindings/display/msm/edp.txt b/dts/Bindings/display/msm/edp.txt
deleted file mode 100644
index eff9daff41..0000000000
--- a/dts/Bindings/display/msm/edp.txt
+++ /dev/null
@@ -1,56 +0,0 @@
-Qualcomm Technologies Inc. adreno/snapdragon eDP output
-
-Required properties:
-- compatible:
-  * "qcom,mdss-edp"
-- reg: Physical base address and length of the registers of controller and PLL
-- reg-names: The names of register regions. The following regions are required:
-  * "edp"
-  * "pll_base"
-- interrupts: The interrupt signal from the eDP block.
-- power-domains: Should be <&mmcc MDSS_GDSC>.
-- clocks: device clocks
-  See Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
-- clock-names: the following clocks are required:
-  * "core"
-  * "iface"
-  * "mdp_core"
-  * "pixel"
-  * "link"
-- #clock-cells: The value should be 1.
-- vdda-supply: phandle to vdda regulator device node
-- lvl-vdd-supply: phandle to regulator device node which is used to supply power
-  to HPD receiving chip
-- panel-en-gpios: GPIO pin to supply power to panel.
-- panel-hpd-gpios: GPIO pin used for eDP hpd.
-
-
-Example:
-	mdss_edp: qcom,mdss_edp@fd923400 {
-			compatible = "qcom,mdss-edp";
-			reg-names =
-				"edp",
-				"pll_base";
-			reg =	<0xfd923400 0x700>,
-				<0xfd923a00 0xd4>;
-			interrupt-parent = <&mdss_mdp>;
-			interrupts = <12 0>;
-			power-domains = <&mmcc MDSS_GDSC>;
-			clock-names =
-				"core",
-				"pixel",
-				"iface",
-				"link",
-				"mdp_core";
-			clocks =
-				<&mmcc MDSS_EDPAUX_CLK>,
-				<&mmcc MDSS_EDPPIXEL_CLK>,
-				<&mmcc MDSS_AHB_CLK>,
-				<&mmcc MDSS_EDPLINK_CLK>,
-				<&mmcc MDSS_MDP_CLK>;
-			#clock-cells = <1>;
-			vdda-supply = <&pma8084_l12>;
-			lvl-vdd-supply = <&lvl_vreg>;
-			panel-en-gpios = <&tlmm 137 0>;
-			panel-hpd-gpios = <&tlmm 103 0>;
-	};
diff --git a/dts/Bindings/display/panel/abt,y030xx067a.yaml b/dts/Bindings/display/panel/abt,y030xx067a.yaml
index a108029ecf..acd2f3faa6 100644
--- a/dts/Bindings/display/panel/abt,y030xx067a.yaml
+++ b/dts/Bindings/display/panel/abt,y030xx067a.yaml
@@ -6,15 +6,12 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Asia Better Technology 3.0" (320x480 pixels) 24-bit IPS LCD panel
 
-description: |
-  The panel must obey the rules for a SPI slave device as specified in
-  spi/spi-controller.yaml
-
 maintainers:
   - Paul Cercueil <paul@crapouillou.net>
 
 allOf:
   - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
 
 properties:
   compatible:
diff --git a/dts/Bindings/display/panel/boe,bf060y8m-aj0.yaml b/dts/Bindings/display/panel/boe,bf060y8m-aj0.yaml
new file mode 100644
index 0000000000..a8f3afa922
--- /dev/null
+++ b/dts/Bindings/display/panel/boe,bf060y8m-aj0.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/boe,bf060y8m-aj0.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: BOE BF060Y8M-AJ0 5.99" 1080x2160 AMOLED Panel
+
+maintainers:
+  - AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
+
+description: |
+  This is a 5.99" 1080x2160 16.7M Color active matrix AMOLED
+  video mode panel module on MIPI-DSI 4-Lane interface, GGRB
+  pixel arrangement, 63 micrometers pitch, with an active
+  area of 68.04 x 136.08 millimeters.
+  Each pixel is divided into red and green dots, or blue and
+  green dots, and two pixels share red or blue dots which are
+  arranged in vertical stripe.
+  The DriverIC for this panel module is SW43404.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: boe,bf060y8m-aj0
+
+  elvdd-supply:
+    description: EL Driving positive (VDD) supply (4.40-4.80V)
+  elvss-supply:
+    description: EL Driving negative (VSS) supply (-5.00V to -1.40V)
+  vcc-supply:
+    description: Core (TSP) voltage supply (2.70-3.60V)
+  vci-supply:
+    description: DriverIC Operation supply (2.60-3.60V)
+  vddio-supply:
+    description: I/O voltage supply (1.62-1.98V)
+
+  port: true
+  reg: true
+  reset-gpios: true
+
+required:
+  - compatible
+  - elvdd-supply
+  - elvss-supply
+  - vcc-supply
+  - vci-supply
+  - vddio-supply
+  - reg
+  - reset-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel@0 {
+            compatible = "boe,bf060y8m-aj0";
+            reg = <0>;
+
+            reset-gpios = <&tlmm 94 GPIO_ACTIVE_HIGH>;
+
+            vcc-supply = <&disp_vcc_vreg>;
+            vddio-supply = <&disp_vddio_vreg>;
+            vci-supply = <&disp_vci_vreg>;
+            elvdd-supply = <&disp_elvdd_vreg>;
+            elvss-supply = <&disp_elvss_vreg>;
+
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&dsi0_out>;
+                };
+            };
+        };
+    };
diff --git a/dts/Bindings/display/panel/ilitek,ili9163.yaml b/dts/Bindings/display/panel/ilitek,ili9163.yaml
new file mode 100644
index 0000000000..7e7a8362b9
--- /dev/null
+++ b/dts/Bindings/display/panel/ilitek,ili9163.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/ilitek,ili9163.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ilitek ILI9163 display panels device tree bindings
+
+maintainers:
+  - Daniel Mack <daniel@zonque.org>
+
+description:
+  This binding is for display panels using an Ilitek ILI9163 controller in SPI
+  mode.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - newhaven,1.8-128160EF
+      - const: ilitek,ili9163
+
+  spi-max-frequency:
+    maximum: 32000000
+
+  dc-gpios:
+    maxItems: 1
+    description: Display data/command selection (D/CX)
+
+  backlight: true
+  reg: true
+  reset-gpios: true
+  rotation: true
+
+required:
+  - compatible
+  - reg
+  - dc-gpios
+  - reset-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    backlight: backlight {
+            compatible = "gpio-backlight";
+            gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
+    };
+    spi {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            display@0 {
+                    compatible = "newhaven,1.8-128160EF", "ilitek,ili9163";
+                    reg = <0>;
+                    spi-max-frequency = <32000000>;
+                    dc-gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>;
+                    reset-gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>;
+                    rotation = <180>;
+                    backlight = <&backlight>;
+            };
+    };
+
+...
diff --git a/dts/Bindings/display/panel/ilitek,ili9322.yaml b/dts/Bindings/display/panel/ilitek,ili9322.yaml
index e89c1ea62f..7d221ef354 100644
--- a/dts/Bindings/display/panel/ilitek,ili9322.yaml
+++ b/dts/Bindings/display/panel/ilitek,ili9322.yaml
@@ -15,11 +15,9 @@ description: |
   960 TFT source driver pins and 240 TFT gate driver pins, VCOM, VCOML and
   VCOMH outputs.
 
-  The panel must obey the rules for a SPI slave device as specified in
-  spi/spi-controller.yaml
-
 allOf:
   - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
 
 properties:
   compatible:
diff --git a/dts/Bindings/display/panel/ilitek,ili9881c.yaml b/dts/Bindings/display/panel/ilitek,ili9881c.yaml
index b2fcec4f22..c5d1df6808 100644
--- a/dts/Bindings/display/panel/ilitek,ili9881c.yaml
+++ b/dts/Bindings/display/panel/ilitek,ili9881c.yaml
@@ -9,24 +9,28 @@ title: Ilitek ILI9881c based MIPI-DSI panels
 maintainers:
   - Maxime Ripard <mripard@kernel.org>
 
+allOf:
+  - $ref: panel-common.yaml#
+
 properties:
   compatible:
     items:
       - enum:
           - bananapi,lhr050h41
           - feixin,k101-im2byl02
+          - wanchanglong,w552946aba
       - const: ilitek,ili9881c
 
   backlight: true
   power-supply: true
   reg: true
   reset-gpios: true
+  rotation: true
 
 required:
   - compatible
   - power-supply
   - reg
-  - reset-gpios
 
 additionalProperties: false
 
diff --git a/dts/Bindings/display/panel/innolux,ej030na.yaml b/dts/Bindings/display/panel/innolux,ej030na.yaml
index cda36c04e8..72788e3e6c 100644
--- a/dts/Bindings/display/panel/innolux,ej030na.yaml
+++ b/dts/Bindings/display/panel/innolux,ej030na.yaml
@@ -6,15 +6,12 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Innolux EJ030NA 3.0" (320x480 pixels) 24-bit TFT LCD panel
 
-description: |
-  The panel must obey the rules for a SPI slave device as specified in
-  spi/spi-controller.yaml
-
 maintainers:
   - Paul Cercueil <paul@crapouillou.net>
 
 allOf:
   - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
 
 properties:
   compatible:
diff --git a/dts/Bindings/display/panel/jdi,lt070me05000.yaml b/dts/Bindings/display/panel/jdi,lt070me05000.yaml
index 4f92365e88..63c82a4378 100644
--- a/dts/Bindings/display/panel/jdi,lt070me05000.yaml
+++ b/dts/Bindings/display/panel/jdi,lt070me05000.yaml
@@ -35,6 +35,8 @@ properties:
       phandle of the gpio for power ic line
       Power IC supply enable, High active
 
+  port: true
+
 required:
   - compatible
   - reg
diff --git a/dts/Bindings/display/panel/kingdisplay,kd035g6-54nt.yaml b/dts/Bindings/display/panel/kingdisplay,kd035g6-54nt.yaml
index c45c92a3d4..2a2756d196 100644
--- a/dts/Bindings/display/panel/kingdisplay,kd035g6-54nt.yaml
+++ b/dts/Bindings/display/panel/kingdisplay,kd035g6-54nt.yaml
@@ -6,15 +6,12 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: King Display KD035G6-54NT 3.5" (320x240 pixels) 24-bit TFT LCD panel
 
-description: |
-  The panel must obey the rules for a SPI slave device as specified in
-  spi/spi-controller.yaml
-
 maintainers:
   - Paul Cercueil <paul@crapouillou.net>
 
 allOf:
   - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
 
 properties:
   compatible:
diff --git a/dts/Bindings/display/panel/lgphilips,lb035q02.yaml b/dts/Bindings/display/panel/lgphilips,lb035q02.yaml
index 830e335ddb..5e4e0e552c 100644
--- a/dts/Bindings/display/panel/lgphilips,lb035q02.yaml
+++ b/dts/Bindings/display/panel/lgphilips,lb035q02.yaml
@@ -6,15 +6,12 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: LG.Philips LB035Q02 Panel
 
-description: |
-  The panel must obey the rules for a SPI slave device as specified in
-  spi/spi-controller.yaml
-
 maintainers:
   - Tomi Valkeinen <tomi.valkeinen@ti.com>
 
 allOf:
   - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
 
 properties:
   compatible:
diff --git a/dts/Bindings/display/panel/novatek,nt35950.yaml b/dts/Bindings/display/panel/novatek,nt35950.yaml
new file mode 100644
index 0000000000..377a05d48a
--- /dev/null
+++ b/dts/Bindings/display/panel/novatek,nt35950.yaml
@@ -0,0 +1,106 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/novatek,nt35950.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Novatek NT35950-based display panels
+
+maintainers:
+  - AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
+
+description: |
+  The nt35950 IC from Novatek is a Driver IC used to drive MIPI-DSI panels,
+  with Static RAM for content retention in command mode and also supports
+  video mode with VESA Frame Buffer Compression or Display Stream Compression
+  on single, or dual dsi port(s).
+  This DDIC is also capable of upscaling an input image to the panel's native
+  resolution, for example it can upscale a 1920x1080 input to 3840x2160 with
+  either bilinear interpolation or pixel duplication.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - sharp,ls055d1sx04
+      - const: novatek,nt35950
+    description: This indicates the panel manufacturer of the panel
+      that is in turn using the NT35950 panel driver. The compatible
+      string determines how the NT35950 panel driver shall be configured
+      to work with the indicated panel. The novatek,nt35950 compatible shall
+      always be provided as a fallback.
+
+  reset-gpios:
+    maxItems: 1
+    description: phandle of gpio for reset line - This should be 8mA, gpio
+      can be configured using mux, pinctrl, pinctrl-names (active high)
+
+  avdd-supply:
+    description: positive boost supply regulator
+  avee-supply:
+    description: negative boost supply regulator
+  dvdd-supply:
+    description: regulator that supplies the digital voltage
+  vddio-supply:
+    description: regulator that supplies the I/O voltage
+
+  backlight: true
+  ports: true
+  reg: true
+
+required:
+  - compatible
+  - reg
+  - reset-gpios
+  - avdd-supply
+  - avee-supply
+  - dvdd-supply
+  - vddio-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "sharp,ls055d1sx04", "novatek,nt35950";
+            reg = <0>;
+
+            backlight = <&pmi8998_wled>;
+            reset-gpios = <&tlmm 94 GPIO_ACTIVE_HIGH>;
+
+            avdd-supply = <&lab>;
+            avee-supply = <&ibb>;
+            dvdd-supply = <&disp_dvdd_vreg>;
+            vddio-supply = <&vreg_l14a_1p85>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    panel_in0: endpoint {
+                        remote-endpoint = <&dsi0_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    panel_in1: endpoint {
+                        remote-endpoint = <&dsi1_out>;
+                    };
+                };
+            };
+        };
+    };
+
+...
diff --git a/dts/Bindings/display/panel/novatek,nt36672a.yaml b/dts/Bindings/display/panel/novatek,nt36672a.yaml
index ef4c0a2451..563766d283 100644
--- a/dts/Bindings/display/panel/novatek,nt36672a.yaml
+++ b/dts/Bindings/display/panel/novatek,nt36672a.yaml
@@ -34,7 +34,7 @@ properties:
     description: phandle of gpio for reset line - This should be 8mA, gpio
       can be configured using mux, pinctrl, pinctrl-names (active high)
 
-  vddio-supply:
+  vddi0-supply:
     description: phandle of the regulator that provides the supply voltage
       Power IC supply
 
@@ -75,8 +75,6 @@ examples:
 
             reset-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
 
-            #address-cells = <1>;
-            #size-cells = <0>;
             port {
                 tianma_nt36672a_in_0: endpoint {
                     remote-endpoint = <&dsi0_out>;
diff --git a/dts/Bindings/display/panel/panel-simple-dsi.yaml b/dts/Bindings/display/panel/panel-simple-dsi.yaml
index fbd7166924..2c00813f5d 100644
--- a/dts/Bindings/display/panel/panel-simple-dsi.yaml
+++ b/dts/Bindings/display/panel/panel-simple-dsi.yaml
@@ -35,6 +35,8 @@ properties:
       - boe,tv080wum-nl0
         # Innolux P079ZCA 7.85" 768x1024 TFT LCD panel
       - innolux,p079zca
+        # JDI FHD_R63452 1080x1920 5.2" IPS LCD Panel
+      - jdi,fhd-r63452
         # Khadas TS050 5" 1080x1920 LCD panel
       - khadas,ts050
         # Kingdisplay KD097D04 9.7" 1536x2048 TFT LCD panel
diff --git a/dts/Bindings/display/panel/panel-simple.yaml b/dts/Bindings/display/panel/panel-simple.yaml
index f3c9395d23..62f5f050c1 100644
--- a/dts/Bindings/display/panel/panel-simple.yaml
+++ b/dts/Bindings/display/panel/panel-simple.yaml
@@ -290,6 +290,8 @@ properties:
       - starry,kr070pe2t
         # Starry 12.2" (1920x1200 pixels) TFT LCD panel
       - starry,kr122ea0sra
+        # Team Source Display Technology TST043015CMHX 4.3" WQVGA TFT LCD panel
+      - team-source-display,tst043015cmhx
         # Tianma Micro-electronics TM070JDHG30 7.0" WXGA TFT LCD panel
       - tianma,tm070jdhg30
         # Tianma Micro-electronics TM070JVHG33 7.0" WXGA TFT LCD panel
diff --git a/dts/Bindings/display/panel/samsung,ld9040.yaml b/dts/Bindings/display/panel/samsung,ld9040.yaml
index 060ee27a47..d525165d6d 100644
--- a/dts/Bindings/display/panel/samsung,ld9040.yaml
+++ b/dts/Bindings/display/panel/samsung,ld9040.yaml
@@ -6,15 +6,12 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Samsung LD9040 AMOLED LCD parallel RGB panel with SPI control bus
 
-description: |
-  The panel must obey the rules for a SPI slave device as specified in
-  spi/spi-controller.yaml
-
 maintainers:
   - Andrzej Hajda <a.hajda@samsung.com>
 
 allOf:
   - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
 
 properties:
   compatible:
@@ -63,8 +60,6 @@ examples:
 
         lcd@0 {
             compatible = "samsung,ld9040";
-            #address-cells = <1>;
-            #size-cells = <0>;
 
             reg = <0>;
             vdd3-supply = <&ldo7_reg>;
diff --git a/dts/Bindings/display/panel/samsung,s6e63m0.yaml b/dts/Bindings/display/panel/samsung,s6e63m0.yaml
index ea58df4926..940f7f8852 100644
--- a/dts/Bindings/display/panel/samsung,s6e63m0.yaml
+++ b/dts/Bindings/display/panel/samsung,s6e63m0.yaml
@@ -12,6 +12,7 @@ maintainers:
 allOf:
   - $ref: panel-common.yaml#
   - $ref: /schemas/leds/backlight/common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
 
 properties:
   compatible:
diff --git a/dts/Bindings/display/panel/sitronix,st7789v.yaml b/dts/Bindings/display/panel/sitronix,st7789v.yaml
index fa46d151e7..9e1d707c2a 100644
--- a/dts/Bindings/display/panel/sitronix,st7789v.yaml
+++ b/dts/Bindings/display/panel/sitronix,st7789v.yaml
@@ -6,15 +6,12 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Sitronix ST7789V RGB panel with SPI control bus
 
-description: |
-  The panel must obey the rules for a SPI slave device as specified in
-  spi/spi-controller.yaml
-
 maintainers:
   - Maxime Ripard <mripard@kernel.org>
 
 allOf:
   - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
 
 properties:
   compatible:
diff --git a/dts/Bindings/display/panel/sony,acx565akm.yaml b/dts/Bindings/display/panel/sony,acx565akm.yaml
index 95d053c548..98abdf4dde 100644
--- a/dts/Bindings/display/panel/sony,acx565akm.yaml
+++ b/dts/Bindings/display/panel/sony,acx565akm.yaml
@@ -6,15 +6,12 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Sony ACX565AKM SDI Panel
 
-description: |
-  The panel must obey the rules for a SPI slave device as specified in
-  spi/spi-controller.yaml
-
 maintainers:
   - Tomi Valkeinen <tomi.valkeinen@ti.com>
 
 allOf:
   - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
 
 properties:
   compatible:
diff --git a/dts/Bindings/display/panel/sony,tulip-truly-nt35521.yaml b/dts/Bindings/display/panel/sony,tulip-truly-nt35521.yaml
new file mode 100644
index 0000000000..9679729395
--- /dev/null
+++ b/dts/Bindings/display/panel/sony,tulip-truly-nt35521.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/sony,tulip-truly-nt35521.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sony Tulip Truly NT35521 5.24" 1280x720 MIPI-DSI Panel
+
+maintainers:
+  - Shawn Guo <shawn.guo@linaro.org>
+
+description: |
+  The Sony Tulip Truly NT35521 is a 5.24" 1280x720 MIPI-DSI panel, which
+  can be found no Sony Xperia M4 phone.  The panel backlight is managed
+  through DSI link.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: sony,tulip-truly-nt35521
+
+  reg: true
+
+  positive5-supply:
+    description: Positive 5V supply
+
+  negative5-supply:
+    description: Negative 5V supply
+
+  reset-gpios: true
+
+  enable-gpios: true
+
+  port: true
+
+required:
+  - compatible
+  - reg
+  - positive5-supply
+  - negative5-supply
+  - reset-gpios
+  - enable-gpios
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "sony,tulip-truly-nt35521";
+            reg = <0>;
+            positive5-supply = <&positive5_reg>;
+            negative5-supply = <&negative5_reg>;
+            reset-gpios = <&msmgpio 25 GPIO_ACTIVE_LOW>;
+            enable-gpios = <&msmgpio 10 GPIO_ACTIVE_HIGH>;
+
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&dsi0_out>;
+                };
+            };
+        };
+    };
+...
diff --git a/dts/Bindings/display/panel/tpo,td.yaml b/dts/Bindings/display/panel/tpo,td.yaml
index 4aa6056134..f902a9d741 100644
--- a/dts/Bindings/display/panel/tpo,td.yaml
+++ b/dts/Bindings/display/panel/tpo,td.yaml
@@ -6,16 +6,13 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Toppoly TD Panels
 
-description: |
-  The panel must obey the rules for a SPI slave device as specified in
-  spi/spi-controller.yaml
-
 maintainers:
   - Marek Belisko <marek@goldelico.com>
   - H. Nikolaus Schaller <hns@goldelico.com>
 
 allOf:
   - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
 
 properties:
   compatible:
diff --git a/dts/Bindings/display/rockchip/rockchip,rk3066-hdmi.yaml b/dts/Bindings/display/rockchip/rockchip,rk3066-hdmi.yaml
index 008c144257..1a68a940d1 100644
--- a/dts/Bindings/display/rockchip/rockchip,rk3066-hdmi.yaml
+++ b/dts/Bindings/display/rockchip/rockchip,rk3066-hdmi.yaml
@@ -26,14 +26,6 @@ properties:
   clock-names:
     const: hclk
 
-  pinctrl-0:
-    maxItems: 2
-
-  pinctrl-names:
-    const: default
-    description:
-      Switch the iomux for the HPD/I2C pins to HDMI function.
-
   power-domains:
     maxItems: 1
 
diff --git a/dts/Bindings/display/simple-framebuffer.yaml b/dts/Bindings/display/simple-framebuffer.yaml
index c2499a7906..44a29d813f 100644
--- a/dts/Bindings/display/simple-framebuffer.yaml
+++ b/dts/Bindings/display/simple-framebuffer.yaml
@@ -83,13 +83,25 @@ properties:
   format:
     description: >
       Format of the framebuffer:
+        * `a1r5g5b5` - 16-bit pixels, d[15]=a, d[14:10]=r, d[9:5]=g, d[4:0]=b
+        * `a2r10g10b10` - 32-bit pixels, d[31:30]=a, d[29:20]=r, d[19:10]=g, d[9:0]=b
         * `a8b8g8r8` - 32-bit pixels, d[31:24]=a, d[23:16]=b, d[15:8]=g, d[7:0]=r
+        * `a8r8g8b8` - 32-bit pixels, d[31:24]=a, d[23:16]=r, d[15:8]=g, d[7:0]=b
         * `r5g6b5` - 16-bit pixels, d[15:11]=r, d[10:5]=g, d[4:0]=b
+        * `r5g5b5a1` - 16-bit pixels, d[15:11]=r, d[10:6]=g, d[5:1]=b d[1:0]=a
+        * `r8g8b8` - 24-bit pixels, d[23:16]=r, d[15:8]=g, d[7:0]=b
+        * `x1r5g5b5` - 16-bit pixels, d[14:10]=r, d[9:5]=g, d[4:0]=b
         * `x2r10g10b10` - 32-bit pixels, d[29:20]=r, d[19:10]=g, d[9:0]=b
         * `x8r8g8b8` - 32-bit pixels, d[23:16]=r, d[15:8]=g, d[7:0]=b
     enum:
+      - a1r5g5b5
+      - a2r10g10b10
       - a8b8g8r8
+      - a8r8g8b8
       - r5g6b5
+      - r5g5b5a1
+      - r8g8b8
+      - x1r5g5b5
       - x2r10g10b10
       - x8r8g8b8
 
diff --git a/dts/Bindings/display/sprd/sprd,display-subsystem.yaml b/dts/Bindings/display/sprd/sprd,display-subsystem.yaml
new file mode 100644
index 0000000000..3d107e9434
--- /dev/null
+++ b/dts/Bindings/display/sprd/sprd,display-subsystem.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/sprd/sprd,display-subsystem.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Unisoc DRM master device
+
+maintainers:
+  - Kevin Tang <kevin.tang@unisoc.com>
+
+description: |
+  The Unisoc DRM master device is a virtual device needed to list all
+  DPU devices or other display interface nodes that comprise the
+  graphics subsystem.
+
+  Unisoc's display pipeline have several components as below description,
+  multi display controllers and corresponding physical interfaces.
+  For different display scenarios, dpu0 and dpu1 maybe binding to different
+  encoder.
+
+  E.g:
+  dpu0 and dpu1 both binding to DSI for dual mipi-dsi display;
+  dpu0 binding to DSI for primary display, and dpu1 binding to DP for external display;
+
+          +-----------------------------------------+
+          |                                         |
+          |                            +---------+  |
+  +----+  |   +----+    +---------+    |DPHY/CPHY|  |   +------+
+  |    +----->+dpu0+--->+MIPI|DSI +--->+Combo    +----->+Panel0|
+  |AXI |  |   +----+    +---------+    +---------+  |   +------+
+  |    |  |                  ^                      |
+  |    |  |                  |                      |
+  |    |  |      +-----------+                      |
+  |    |  |      |                                  |
+  |APB |  |   +--+-+    +-----------+    +---+      |   +------+
+  |    +----->+dpu1+--->+DisplayPort+--->+PHY+--------->+Panel1|
+  |    |  |   +----+    +-----------+    +---+      |   +------+
+  +----+  |                                         |
+          +-----------------------------------------+
+
+properties:
+  compatible:
+    const: sprd,display-subsystem
+
+  ports:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description:
+      Should contain a list of phandles pointing to display interface port
+      of DPU devices.
+
+required:
+  - compatible
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    display-subsystem {
+        compatible = "sprd,display-subsystem";
+        ports = <&dpu_out>;
+    };
+
diff --git a/dts/Bindings/display/sprd/sprd,sharkl3-dpu.yaml b/dts/Bindings/display/sprd/sprd,sharkl3-dpu.yaml
new file mode 100644
index 0000000000..4ebea60b8c
--- /dev/null
+++ b/dts/Bindings/display/sprd/sprd,sharkl3-dpu.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/sprd/sprd,sharkl3-dpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Unisoc Sharkl3 Display Processor Unit (DPU)
+
+maintainers:
+  - Kevin Tang <kevin.tang@unisoc.com>
+
+description: |
+  DPU (Display Processor Unit) is the Display Controller for the Unisoc SoCs
+  which transfers the image data from a video memory buffer to an internal
+  LCD interface.
+
+properties:
+  compatible:
+    const: sprd,sharkl3-dpu
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+
+  clock-names:
+    items:
+      - const: clk_src_128m
+      - const: clk_src_384m
+
+  power-domains:
+    maxItems: 1
+
+  iommus:
+    maxItems: 1
+
+  port:
+    type: object
+    description:
+      A port node with endpoint definitions as defined in
+      Documentation/devicetree/bindings/media/video-interfaces.txt.
+      That port should be the output endpoint, usually output to
+      the associated DSI.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/sprd,sc9860-clk.h>
+    dpu: dpu@63000000 {
+        compatible = "sprd,sharkl3-dpu";
+        reg = <0x63000000 0x1000>;
+        interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+        clock-names = "clk_src_128m", "clk_src_384m";
+
+        clocks = <&pll CLK_TWPLL_128M>,
+          <&pll CLK_TWPLL_384M>;
+
+        dpu_port: port {
+            dpu_out: endpoint {
+                remote-endpoint = <&dsi_in>;
+            };
+        };
+    };
diff --git a/dts/Bindings/display/sprd/sprd,sharkl3-dsi-host.yaml b/dts/Bindings/display/sprd/sprd,sharkl3-dsi-host.yaml
new file mode 100644
index 0000000000..bc5594d186
--- /dev/null
+++ b/dts/Bindings/display/sprd/sprd,sharkl3-dsi-host.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/sprd/sprd,sharkl3-dsi-host.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Unisoc MIPI DSI Controller
+
+maintainers:
+  - Kevin Tang <kevin.tang@unisoc.com>
+
+properties:
+  compatible:
+    const: sprd,sharkl3-dsi-host
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 2
+
+  clocks:
+    minItems: 1
+
+  clock-names:
+    items:
+      - const: clk_src_96m
+
+  power-domains:
+    maxItems: 1
+
+  ports:
+    type: object
+
+    properties:
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 0
+
+      port@0:
+        type: object
+        description:
+          A port node with endpoint definitions as defined in
+          Documentation/devicetree/bindings/media/video-interfaces.txt.
+          That port should be the input endpoint, usually coming from
+          the associated DPU.
+
+    required:
+      - "#address-cells"
+      - "#size-cells"
+      - port@0
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/sprd,sc9860-clk.h>
+    dsi: dsi@63100000 {
+        compatible = "sprd,sharkl3-dsi-host";
+        reg = <0x63100000 0x1000>;
+        interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+          <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+        clock-names = "clk_src_96m";
+        clocks = <&pll CLK_TWPLL_96M>;
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            port@0 {
+                reg = <0>;
+                dsi_in: endpoint {
+                    remote-endpoint = <&dpu_out>;
+                };
+            };
+        };
+    };
diff --git a/dts/Bindings/display/st,stm32-dsi.yaml b/dts/Bindings/display/st,stm32-dsi.yaml
index ce1ef93cce..54f67cb510 100644
--- a/dts/Bindings/display/st,stm32-dsi.yaml
+++ b/dts/Bindings/display/st,stm32-dsi.yaml
@@ -110,7 +110,7 @@ examples:
               };
         };
 
-        panel-dsi@0 {
+        panel@0 {
               compatible = "orisetech,otm8009a";
               reg = <0>;
               reset-gpios = <&gpioe 4 GPIO_ACTIVE_LOW>;
@@ -125,4 +125,3 @@ examples:
     };
 
 ...
-
diff --git a/dts/Bindings/display/tegra/nvidia,tegra20-host1x.txt b/dts/Bindings/display/tegra/nvidia,tegra20-host1x.txt
index 8a6d3e1ee3..e61999ce54 100644
--- a/dts/Bindings/display/tegra/nvidia,tegra20-host1x.txt
+++ b/dts/Bindings/display/tegra/nvidia,tegra20-host1x.txt
@@ -19,6 +19,19 @@ Required properties:
   See ../reset/reset.txt for details.
 - reset-names: Must include the following entries:
   - host1x
+  - mc
+
+Optional properties:
+- operating-points-v2: See ../bindings/opp/opp.txt for details.
+  - power-domains: Phandle to HEG or core power domain.
+
+For each opp entry in 'operating-points-v2' table of host1x and its modules:
+- opp-supported-hw: One bitfield indicating:
+	On Tegra20: SoC process ID mask
+	On Tegra30+: SoC speedo ID mask
+
+	A bitwise AND is performed against the value and if any bit
+	matches, the OPP gets enabled.
 
 Each host1x client module having to perform DMA through the Memory Controller
 should have the interconnect endpoints set to the Memory Client and External
@@ -45,6 +58,8 @@ of the following host1x client modules:
   - interconnect-names: Must include name of the interconnect path for each
     interconnect entry. Consult TRM documentation for information about
     available memory clients, see MEMORY CONTROLLER section.
+  - operating-points-v2: See ../bindings/opp/opp.txt for details.
+  - power-domains: Phandle to MPE power domain.
 
 - vi: video input
 
@@ -128,6 +143,8 @@ of the following host1x client modules:
   - interconnect-names: Must include name of the interconnect path for each
     interconnect entry. Consult TRM documentation for information about
     available memory clients, see MEMORY CONTROLLER section.
+  - operating-points-v2: See ../bindings/opp/opp.txt for details.
+  - power-domains: Phandle to VENC power domain.
 
 - epp: encoder pre-processor
 
@@ -147,6 +164,8 @@ of the following host1x client modules:
   - interconnect-names: Must include name of the interconnect path for each
     interconnect entry. Consult TRM documentation for information about
     available memory clients, see MEMORY CONTROLLER section.
+  - operating-points-v2: See ../bindings/opp/opp.txt for details.
+  - power-domains: Phandle to HEG or core power domain.
 
 - isp: image signal processor
 
@@ -166,6 +185,7 @@ of the following host1x client modules:
   - interconnect-names: Must include name of the interconnect path for each
     interconnect entry. Consult TRM documentation for information about
     available memory clients, see MEMORY CONTROLLER section.
+  - power-domains: Phandle to VENC or core power domain.
 
 - gr2d: 2D graphics engine
 
@@ -179,12 +199,15 @@ of the following host1x client modules:
     See ../reset/reset.txt for details.
   - reset-names: Must include the following entries:
     - 2d
+    - mc
 
   Optional properties:
   - interconnects: Must contain entry for the GR2D memory clients.
   - interconnect-names: Must include name of the interconnect path for each
     interconnect entry. Consult TRM documentation for information about
     available memory clients, see MEMORY CONTROLLER section.
+  - operating-points-v2: See ../bindings/opp/opp.txt for details.
+  - power-domains: Phandle to HEG or core power domain.
 
 - gr3d: 3D graphics engine
 
@@ -203,12 +226,16 @@ of the following host1x client modules:
   - reset-names: Must include the following entries:
     - 3d
     - 3d2 (Only required on SoCs with two 3D clocks)
+    - mc
+    - mc2 (Only required on SoCs with two 3D clocks)
 
   Optional properties:
   - interconnects: Must contain entry for the GR3D memory clients.
   - interconnect-names: Must include name of the interconnect path for each
     interconnect entry. Consult TRM documentation for information about
     available memory clients, see MEMORY CONTROLLER section.
+  - operating-points-v2: See ../bindings/opp/opp.txt for details.
+  - power-domains: Phandles to 3D or core power domain.
 
 - dc: display controller
 
@@ -241,6 +268,8 @@ of the following host1x client modules:
   - interconnect-names: Must include name of the interconnect path for each
     interconnect entry. Consult TRM documentation for information about
     available memory clients, see MEMORY CONTROLLER section.
+  - operating-points-v2: See ../bindings/opp/opp.txt for details.
+  - power-domains: Phandle to core power domain.
 
 - hdmi: High Definition Multimedia Interface
 
@@ -267,6 +296,7 @@ of the following host1x client modules:
   - nvidia,hpd-gpio: specifies a GPIO used for hotplug detection
   - nvidia,edid: supplies a binary EDID blob
   - nvidia,panel: phandle of a display panel
+  - operating-points-v2: See ../bindings/opp/opp.txt for details.
 
 - tvo: TV encoder output
 
@@ -277,6 +307,10 @@ of the following host1x client modules:
   - clocks: Must contain one entry, for the module clock.
     See ../clocks/clock-bindings.txt for details.
 
+  Optional properties:
+  - operating-points-v2: See ../bindings/opp/opp.txt for details.
+  - power-domains: Phandle to core power domain.
+
 - dsi: display serial interface
 
   Required properties:
@@ -305,6 +339,7 @@ of the following host1x client modules:
   - nvidia,panel: phandle of a display panel
   - nvidia,ganged-mode: contains a phandle to a second DSI controller to gang
     up with in order to support up to 8 data lanes
+  - operating-points-v2: See ../bindings/opp/opp.txt for details.
 
 - sor: serial output resource
 
@@ -408,6 +443,8 @@ Example:
 		clocks = <&tegra_car TEGRA20_CLK_HOST1X>;
 		resets = <&tegra_car 28>;
 		reset-names = "host1x";
+		operating-points-v2 = <&dvfs_opp_table>;
+		power-domains = <&domain>;
 
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -421,6 +458,8 @@ Example:
 			clocks = <&tegra_car TEGRA20_CLK_MPE>;
 			resets = <&tegra_car 60>;
 			reset-names = "mpe";
+			operating-points-v2 = <&dvfs_opp_table>;
+			power-domains = <&domain>;
 		};
 
 		vi@54080000 {
@@ -429,6 +468,7 @@ Example:
 			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
 			assigned-clocks = <&tegra_car TEGRA210_CLK_VI>;
 			assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_C4_OUT0>;
+			operating-points-v2 = <&dvfs_opp_table>;
 
 			clocks = <&tegra_car TEGRA210_CLK_VI>;
 			power-domains = <&pd_venc>;
@@ -510,6 +550,8 @@ Example:
 			clocks = <&tegra_car TEGRA20_CLK_EPP>;
 			resets = <&tegra_car 19>;
 			reset-names = "epp";
+			operating-points-v2 = <&dvfs_opp_table>;
+			power-domains = <&domain>;
 		};
 
 		isp {
@@ -528,6 +570,8 @@ Example:
 			clocks = <&tegra_car TEGRA20_CLK_GR2D>;
 			resets = <&tegra_car 21>;
 			reset-names = "2d";
+			operating-points-v2 = <&dvfs_opp_table>;
+			power-domains = <&domain>;
 		};
 
 		gr3d {
@@ -536,6 +580,8 @@ Example:
 			clocks = <&tegra_car TEGRA20_CLK_GR3D>;
 			resets = <&tegra_car 24>;
 			reset-names = "3d";
+			operating-points-v2 = <&dvfs_opp_table>;
+			power-domains = <&domain>;
 		};
 
 		dc@54200000 {
@@ -547,6 +593,8 @@ Example:
 			clock-names = "dc", "parent";
 			resets = <&tegra_car 27>;
 			reset-names = "dc";
+			operating-points-v2 = <&dvfs_opp_table>;
+			power-domains = <&domain>;
 
 			interconnects = <&mc TEGRA20_MC_DISPLAY0A &emc>,
 					<&mc TEGRA20_MC_DISPLAY0B &emc>,
@@ -571,6 +619,8 @@ Example:
 			clock-names = "dc", "parent";
 			resets = <&tegra_car 26>;
 			reset-names = "dc";
+			operating-points-v2 = <&dvfs_opp_table>;
+			power-domains = <&domain>;
 
 			interconnects = <&mc TEGRA20_MC_DISPLAY0AB &emc>,
 					<&mc TEGRA20_MC_DISPLAY0BB &emc>,
@@ -596,6 +646,7 @@ Example:
 			resets = <&tegra_car 51>;
 			reset-names = "hdmi";
 			status = "disabled";
+			operating-points-v2 = <&dvfs_opp_table>;
 		};
 
 		tvo {
@@ -604,6 +655,7 @@ Example:
 			interrupts = <0 76 0x04>;
 			clocks = <&tegra_car TEGRA20_CLK_TVO>;
 			status = "disabled";
+			operating-points-v2 = <&dvfs_opp_table>;
 		};
 
 		dsi {
@@ -615,6 +667,7 @@ Example:
 			resets = <&tegra_car 48>;
 			reset-names = "dsi";
 			status = "disabled";
+			operating-points-v2 = <&dvfs_opp_table>;
 		};
 	};
 
diff --git a/dts/Bindings/dma/arm,pl330.yaml b/dts/Bindings/dma/arm,pl330.yaml
new file mode 100644
index 0000000000..decab185cf
--- /dev/null
+++ b/dts/Bindings/dma/arm,pl330.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/arm,pl330.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM PrimeCell PL330 DMA Controller
+
+maintainers:
+  - Vinod Koul <vkoul@kernel.org>
+
+description:
+  The ARM PrimeCell PL330 DMA controller can move blocks of memory contents
+  between memory and peripherals or memory to memory.
+
+# We need a select here so we don't match all nodes with 'arm,primecell'
+select:
+  properties:
+    compatible:
+      contains:
+        const: arm,pl330
+  required:
+    - compatible
+
+allOf:
+  - $ref: dma-controller.yaml#
+  - $ref: /schemas/arm/primecell.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - arm,pl330
+      - const: arm,primecell
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 32
+    description: A single combined interrupt or an interrupt per event
+
+  '#dma-cells':
+    const: 1
+    description: Contains the DMA request number for the consumer
+
+  arm,pl330-broken-no-flushp:
+    type: boolean
+    description: quirk for avoiding to execute DMAFLUSHP
+
+  arm,pl330-periph-burst:
+    type: boolean
+    description: quirk for performing burst transfer only
+
+  dma-coherent: true
+
+  resets:
+    minItems: 1
+    maxItems: 2
+
+  reset-names:
+    minItems: 1
+    items:
+      - const: dma
+      - const: dma-ocp
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    dma-controller@12680000 {
+        compatible = "arm,pl330", "arm,primecell";
+        reg = <0x12680000 0x1000>;
+        interrupts = <99>;
+        #dma-cells = <1>;
+    };
+...
diff --git a/dts/Bindings/dma/arm-pl08x.yaml b/dts/Bindings/dma/arm-pl08x.yaml
index 3bd9eea543..9193b18fb7 100644
--- a/dts/Bindings/dma/arm-pl08x.yaml
+++ b/dts/Bindings/dma/arm-pl08x.yaml
@@ -10,6 +10,7 @@ maintainers:
   - Vinod Koul <vkoul@kernel.org>
 
 allOf:
+  - $ref: /schemas/arm/primecell.yaml#
   - $ref: "dma-controller.yaml#"
 
 # We need a select here so we don't match all nodes with 'arm,primecell'
@@ -89,6 +90,9 @@ properties:
       - 64
     description: bus width used for memcpy in bits. FTDMAC020 also accept 64 bits
 
+  resets:
+    maxItems: 1
+
 required:
   - reg
   - interrupts
diff --git a/dts/Bindings/dma/arm-pl330.txt b/dts/Bindings/dma/arm-pl330.txt
deleted file mode 100644
index 315e90122a..0000000000
--- a/dts/Bindings/dma/arm-pl330.txt
+++ /dev/null
@@ -1,49 +0,0 @@
-* ARM PrimeCell PL330 DMA Controller
-
-The ARM PrimeCell PL330 DMA controller can move blocks of memory contents
-between memory and peripherals or memory to memory.
-
-Required properties:
-  - compatible: should include both "arm,pl330" and "arm,primecell".
-  - reg: physical base address of the controller and length of memory mapped
-    region.
-  - interrupts: interrupt number to the cpu.
-
-Optional properties:
-  - dma-coherent      : Present if dma operations are coherent
-  - #dma-cells: must be <1>. used to represent the number of integer
-    cells in the dmas property of client device.
-  - dma-channels: contains the total number of DMA channels supported by the DMAC
-  - dma-requests: contains the total number of DMA requests supported by the DMAC
-  - arm,pl330-broken-no-flushp: quirk for avoiding to execute DMAFLUSHP
-  - arm,pl330-periph-burst: quirk for performing burst transfer only
-  - resets: contains an entry for each entry in reset-names.
-	    See ../reset/reset.txt for details.
-  - reset-names: must contain at least "dma", and optional is "dma-ocp".
-
-Example:
-
-	pdma0: pdma@12680000 {
-		compatible = "arm,pl330", "arm,primecell";
-		reg = <0x12680000 0x1000>;
-		interrupts = <99>;
-		#dma-cells = <1>;
-		#dma-channels = <8>;
-		#dma-requests = <32>;
-	};
-
-Client drivers (device nodes requiring dma transfers from dev-to-mem or
-mem-to-dev) should specify the DMA channel numbers and dma channel names
-as shown below.
-
-  [property name]  = <[phandle of the dma controller] [dma request id]>;
-  [property name]  = <[dma channel name]>
-
-      where 'dma request id' is the dma request number which is connected
-      to the client controller. The 'property name' 'dmas' and 'dma-names'
-      as required by the generic dma device tree binding helpers. The dma
-      names correspond 1:1 with the dma request ids in the dmas property.
-
-  Example:  dmas = <&pdma0 12
-		    &pdma1 11>;
-	    dma-names = "tx", "rx";
diff --git a/dts/Bindings/dma/dma-controller.yaml b/dts/Bindings/dma/dma-controller.yaml
index 0043b91da9..6d3727267f 100644
--- a/dts/Bindings/dma/dma-controller.yaml
+++ b/dts/Bindings/dma/dma-controller.yaml
@@ -24,10 +24,10 @@ examples:
     dma: dma-controller@48000000 {
         compatible = "ti,omap-sdma";
         reg = <0x48000000 0x1000>;
-        interrupts = <0 12 0x4
-                      0 13 0x4
-                      0 14 0x4
-                      0 15 0x4>;
+        interrupts = <0 12 0x4>,
+                     <0 13 0x4>,
+                     <0 14 0x4>,
+                     <0 15 0x4>;
         #dma-cells = <1>;
         dma-channels = <32>;
         dma-requests = <127>;
diff --git a/dts/Bindings/dma/ingenic,dma.yaml b/dts/Bindings/dma/ingenic,dma.yaml
index dc059d6fd0..3b0b3b919a 100644
--- a/dts/Bindings/dma/ingenic,dma.yaml
+++ b/dts/Bindings/dma/ingenic,dma.yaml
@@ -14,15 +14,23 @@ allOf:
 
 properties:
   compatible:
-    enum:
-      - ingenic,jz4740-dma
-      - ingenic,jz4725b-dma
-      - ingenic,jz4760-dma
-      - ingenic,jz4760b-dma
-      - ingenic,jz4770-dma
-      - ingenic,jz4780-dma
-      - ingenic,x1000-dma
-      - ingenic,x1830-dma
+    oneOf:
+      - enum:
+          - ingenic,jz4740-dma
+          - ingenic,jz4725b-dma
+          - ingenic,jz4760-dma
+          - ingenic,jz4760-bdma
+          - ingenic,jz4760-mdma
+          - ingenic,jz4760b-dma
+          - ingenic,jz4760b-bdma
+          - ingenic,jz4760b-mdma
+          - ingenic,jz4770-dma
+          - ingenic,jz4780-dma
+          - ingenic,x1000-dma
+          - ingenic,x1830-dma
+      - items:
+          - const: ingenic,jz4770-bdma
+          - const: ingenic,jz4760b-bdma
 
   reg:
     items:
@@ -36,13 +44,19 @@ properties:
     maxItems: 1
 
   "#dma-cells":
-    const: 2
+    enum: [2, 3]
     description: >
       DMA clients must use the format described in dma.txt, giving a phandle
-      to the DMA controller plus the following 2 integer cells:
-
-      - Request type: The DMA request type for transfers to/from the
-        device on the allocated channel, as defined in the SoC documentation.
+      to the DMA controller plus the following integer cells:
+
+      - Request type: The DMA request type specifies the device endpoint that
+        will be the source or destination of the DMA transfer.
+        If "#dma-cells" is 2, the request type is a single cell, and the
+        direction will be unidirectional (either RX or TX but not both).
+        If "#dma-cells" is 3, the request type has two cells; the first
+        one corresponds to the host to device direction (TX), the second one
+        corresponds to the device to host direction (RX). The DMA channel is
+        then bidirectional.
 
       - Channel: If set to 0xffffffff, any available channel will be allocated
         for the client. Otherwise, the exact channel specified will be used.
diff --git a/dts/Bindings/dma/renesas,rcar-dmac.yaml b/dts/Bindings/dma/renesas,rcar-dmac.yaml
index d8142cbd13..7c6badf399 100644
--- a/dts/Bindings/dma/renesas,rcar-dmac.yaml
+++ b/dts/Bindings/dma/renesas,rcar-dmac.yaml
@@ -44,6 +44,10 @@ properties:
       - items:
           - const: renesas,dmac-r8a779a0 # R-Car V3U
 
+      - items:
+          - const: renesas,dmac-r8a779f0 # R-Car S4-8
+          - const: renesas,rcar-gen4-dmac
+
   reg: true
 
   interrupts:
@@ -118,6 +122,7 @@ if:
       contains:
         enum:
           - renesas,dmac-r8a779a0
+          - renesas,rcar-gen4-dmac
 then:
   properties:
     reg:
diff --git a/dts/Bindings/dma/sifive,fu540-c000-pdma.yaml b/dts/Bindings/dma/sifive,fu540-c000-pdma.yaml
index d32a71b975..75ad898c59 100644
--- a/dts/Bindings/dma/sifive,fu540-c000-pdma.yaml
+++ b/dts/Bindings/dma/sifive,fu540-c000-pdma.yaml
@@ -50,7 +50,7 @@ examples:
     dma@3000000 {
       compatible = "sifive,fu540-c000-pdma";
       reg = <0x3000000 0x8000>;
-      interrupts = <23 24 25 26 27 28 29 30>;
+      interrupts = <23>, <24>, <25>, <26>, <27>, <28>, <29>, <30>;
       #dma-cells = <1>;
     };
 
diff --git a/dts/Bindings/dma/snps,dw-axi-dmac.yaml b/dts/Bindings/dma/snps,dw-axi-dmac.yaml
index 79e241498e..4324a94b26 100644
--- a/dts/Bindings/dma/snps,dw-axi-dmac.yaml
+++ b/dts/Bindings/dma/snps,dw-axi-dmac.yaml
@@ -53,6 +53,9 @@ properties:
     minimum: 1
     maximum: 8
 
+  resets:
+    maxItems: 1
+
   snps,dma-masters:
     description: |
       Number of AXI masters supported by the hardware.
diff --git a/dts/Bindings/dma/ti/k3-bcdma.yaml b/dts/Bindings/dma/ti/k3-bcdma.yaml
index df29d59d13..08627d91e6 100644
--- a/dts/Bindings/dma/ti/k3-bcdma.yaml
+++ b/dts/Bindings/dma/ti/k3-bcdma.yaml
@@ -30,6 +30,7 @@ description: |
 
 allOf:
   - $ref: /schemas/dma/dma-controller.yaml#
+  - $ref: /schemas/arm/keystone/ti,k3-sci-common.yaml#
 
 properties:
   compatible:
diff --git a/dts/Bindings/dma/ti/k3-pktdma.yaml b/dts/Bindings/dma/ti/k3-pktdma.yaml
index ea19d12a93..507d16d84a 100644
--- a/dts/Bindings/dma/ti/k3-pktdma.yaml
+++ b/dts/Bindings/dma/ti/k3-pktdma.yaml
@@ -25,6 +25,7 @@ description: |
 
 allOf:
   - $ref: /schemas/dma/dma-controller.yaml#
+  - $ref: /schemas/arm/keystone/ti,k3-sci-common.yaml#
 
 properties:
   compatible:
diff --git a/dts/Bindings/eeprom/at24.yaml b/dts/Bindings/eeprom/at24.yaml
index 4c5396a974..6b61a8cf61 100644
--- a/dts/Bindings/eeprom/at24.yaml
+++ b/dts/Bindings/eeprom/at24.yaml
@@ -87,6 +87,10 @@ properties:
               - items:
                   pattern: cs1024$
               - items:
+                  pattern: c1025$
+              - items:
+                  pattern: cs1025$
+              - items:
                   pattern: c2048$
               - items:
                   pattern: cs2048$
@@ -95,18 +99,21 @@ properties:
       # These are special cases that don't conform to the above pattern.
       # Each requires a standard at24 model as fallback.
       - items:
-          - const: nxp,se97b
-          - const: atmel,24c02
+          - enum:
+              - rohm,br24g01
+              - rohm,br24t01
+          - const: atmel,24c01
       - items:
-          - const: onnn,cat24c04
-          - const: atmel,24c04
+          - enum:
+              - nxp,se97b
+              - renesas,r1ex24002
+          - const: atmel,24c02
       - items:
-          - const: onnn,cat24c05
+          - enum:
+              - onnn,cat24c04
+              - onnn,cat24c05
           - const: atmel,24c04
       - items:
-          - const: renesas,r1ex24002
-          - const: atmel,24c02
-      - items:
           - const: renesas,r1ex24016
           - const: atmel,24c16
       - items:
@@ -115,12 +122,6 @@ properties:
       - items:
           - const: renesas,r1ex24128
           - const: atmel,24c128
-      - items:
-          - const: rohm,br24g01
-          - const: atmel,24c01
-      - items:
-          - const: rohm,br24t01
-          - const: atmel,24c01
 
   label:
     description: Descriptive name of the EEPROM.
diff --git a/dts/Bindings/extcon/extcon-usbc-cros-ec.yaml b/dts/Bindings/extcon/extcon-usbc-cros-ec.yaml
index 20e1ccfc86..2d82b44268 100644
--- a/dts/Bindings/extcon/extcon-usbc-cros-ec.yaml
+++ b/dts/Bindings/extcon/extcon-usbc-cros-ec.yaml
@@ -8,7 +8,6 @@ title: ChromeOS EC USB Type-C cable and accessories detection
 
 maintainers:
   - Benson Leung <bleung@chromium.org>
-  - Enric Balletbo i Serra <enric.balletbo@collabora.com>
 
 description: |
   On ChromeOS systems with USB Type C ports, the ChromeOS Embedded Controller is
diff --git a/dts/Bindings/firmware/intel,ixp4xx-network-processing-engine.yaml b/dts/Bindings/firmware/intel,ixp4xx-network-processing-engine.yaml
index c435c9f369..9a785bbaaf 100644
--- a/dts/Bindings/firmware/intel,ixp4xx-network-processing-engine.yaml
+++ b/dts/Bindings/firmware/intel,ixp4xx-network-processing-engine.yaml
@@ -37,6 +37,20 @@ properties:
       should be named with the instance number of the NPE engine used for
       the crypto engine.
 
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  hss@[0-9]+$:
+    $ref: /schemas/net/intel,ixp4xx-hss.yaml#
+    type: object
+    description: Optional node for the High Speed Serial link (HSS), the
+      node should be named with the instance number of the NPE engine
+      used for the HSS.
+
 required:
   - compatible
   - reg
@@ -45,9 +59,30 @@ additionalProperties: false
 
 examples:
   - |
+    #include <dt-bindings/gpio/gpio.h>
+
     npe: npe@c8006000 {
          compatible = "intel,ixp4xx-network-processing-engine";
          reg = <0xc8006000 0x1000>, <0xc8007000 0x1000>, <0xc8008000 0x1000>;
+         #address-cells = <1>;
+         #size-cells = <0>;
+
+         hss@0 {
+             compatible = "intel,ixp4xx-hss";
+             reg = <0>;
+             intel,npe-handle = <&npe 0>;
+             intel,queue-chl-rxtrig = <&qmgr 12>;
+             intel,queue-chl-txready = <&qmgr 34>;
+             intel,queue-pkt-rx = <&qmgr 13>;
+             intel,queue-pkt-tx = <&qmgr 14>, <&qmgr 15>, <&qmgr 16>, <&qmgr 17>;
+             intel,queue-pkt-rxfree = <&qmgr 18>, <&qmgr 19>, <&qmgr 20>, <&qmgr 21>;
+             intel,queue-pkt-txdone = <&qmgr 22>;
+             cts-gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+             rts-gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+             dcd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+             dtr-gpios = <&gpio_74 2 GPIO_ACTIVE_LOW>;
+             clk-internal-gpios = <&gpio_74 0 GPIO_ACTIVE_HIGH>;
+         };
 
          crypto {
              compatible = "intel,ixp4xx-crypto";
diff --git a/dts/Bindings/firmware/nvidia,tegra186-bpmp.txt b/dts/Bindings/firmware/nvidia,tegra186-bpmp.txt
deleted file mode 100644
index e44a13bc06..0000000000
--- a/dts/Bindings/firmware/nvidia,tegra186-bpmp.txt
+++ /dev/null
@@ -1,107 +0,0 @@
-NVIDIA Tegra Boot and Power Management Processor (BPMP)
-
-The BPMP is a specific processor in Tegra chip, which is designed for
-booting process handling and offloading the power management, clock
-management, and reset control tasks from the CPU. The binding document
-defines the resources that would be used by the BPMP firmware driver,
-which can create the interprocessor communication (IPC) between the CPU
-and BPMP.
-
-Required properties:
-- compatible
-    Array of strings
-    One of:
-    - "nvidia,tegra186-bpmp"
-- mboxes : The phandle of mailbox controller and the mailbox specifier.
-- shmem : List of the phandle of the TX and RX shared memory area that
-	  the IPC between CPU and BPMP is based on.
-- #clock-cells : Should be 1.
-- #power-domain-cells : Should be 1.
-- #reset-cells : Should be 1.
-
-This node is a mailbox consumer. See the following files for details of
-the mailbox subsystem, and the specifiers implemented by the relevant
-provider(s):
-
-- .../mailbox/mailbox.txt
-- .../mailbox/nvidia,tegra186-hsp.txt
-
-This node is a clock, power domain, and reset provider. See the following
-files for general documentation of those features, and the specifiers
-implemented by this node:
-
-- .../clock/clock-bindings.txt
-- <dt-bindings/clock/tegra186-clock.h>
-- ../power/power-domain.yaml
-- <dt-bindings/power/tegra186-powergate.h>
-- .../reset/reset.txt
-- <dt-bindings/reset/tegra186-reset.h>
-
-The BPMP implements some services which must be represented by separate nodes.
-For example, it can provide access to certain I2C controllers, and the I2C
-bindings represent each I2C controller as a device tree node. Such nodes should
-be nested directly inside the main BPMP node.
-
-Software can determine whether a child node of the BPMP node represents a device
-by checking for a compatible property. Any node with a compatible property
-represents a device that can be instantiated. Nodes without a compatible
-property may be used to provide configuration information regarding the BPMP
-itself, although no such configuration nodes are currently defined by this
-binding.
-
-The BPMP firmware defines no single global name-/numbering-space for such
-services. Put another way, the numbering scheme for I2C buses is distinct from
-the numbering scheme for any other service the BPMP may provide (e.g. a future
-hypothetical SPI bus service). As such, child device nodes will have no reg
-property, and the BPMP node will have no #address-cells or #size-cells property.
-
-The shared memory bindings for BPMP
------------------------------------
-
-The shared memory area for the IPC TX and RX between CPU and BPMP are
-predefined and work on top of sysram, which is an SRAM inside the chip.
-
-See ".../sram/sram.txt" for the bindings.
-
-Example:
-
-hsp_top0: hsp@3c00000 {
-	...
-	#mbox-cells = <2>;
-};
-
-sysram@30000000 {
-	compatible = "nvidia,tegra186-sysram", "mmio-sram";
-	reg = <0x0 0x30000000 0x0 0x50000>;
-	#address-cells = <2>;
-	#size-cells = <2>;
-	ranges = <0 0x0 0x0 0x30000000 0x0 0x50000>;
-
-	cpu_bpmp_tx: shmem@4e000 {
-		compatible = "nvidia,tegra186-bpmp-shmem";
-		reg = <0x0 0x4e000 0x0 0x1000>;
-		label = "cpu-bpmp-tx";
-		pool;
-	};
-
-	cpu_bpmp_rx: shmem@4f000 {
-		compatible = "nvidia,tegra186-bpmp-shmem";
-		reg = <0x0 0x4f000 0x0 0x1000>;
-		label = "cpu-bpmp-rx";
-		pool;
-	};
-};
-
-bpmp {
-	compatible = "nvidia,tegra186-bpmp";
-	mboxes = <&hsp_top0 TEGRA_HSP_MBOX_TYPE_DB TEGRA_HSP_DB_MASTER_BPMP>;
-	shmem = <&cpu_bpmp_tx &cpu_bpmp_rx>;
-	#clock-cells = <1>;
-	#power-domain-cells = <1>;
-	#reset-cells = <1>;
-
-	i2c {
-		compatible = "...";
-		...
-	};
-};
diff --git a/dts/Bindings/firmware/nvidia,tegra186-bpmp.yaml b/dts/Bindings/firmware/nvidia,tegra186-bpmp.yaml
new file mode 100644
index 0000000000..833c07f168
--- /dev/null
+++ b/dts/Bindings/firmware/nvidia,tegra186-bpmp.yaml
@@ -0,0 +1,186 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/firmware/nvidia,tegra186-bpmp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra Boot and Power Management Processor (BPMP)
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+description: |
+  The BPMP is a specific processor in Tegra chip, which is designed for
+  booting process handling and offloading the power management, clock
+  management, and reset control tasks from the CPU. The binding document
+  defines the resources that would be used by the BPMP firmware driver,
+  which can create the interprocessor communication (IPC) between the
+  CPU and BPMP.
+
+  This node is a mailbox consumer. See the following files for details
+  of the mailbox subsystem, and the specifiers implemented by the
+  relevant provider(s):
+
+    - .../mailbox/mailbox.txt
+    - .../mailbox/nvidia,tegra186-hsp.yaml
+
+  This node is a clock, power domain, and reset provider. See the
+  following files for general documentation of those features, and the
+  specifiers implemented by this node:
+
+    - .../clock/clock-bindings.txt
+    - <dt-bindings/clock/tegra186-clock.h>
+    - ../power/power-domain.yaml
+    - <dt-bindings/power/tegra186-powergate.h>
+    - .../reset/reset.txt
+    - <dt-bindings/reset/tegra186-reset.h>
+
+  The BPMP implements some services which must be represented by
+  separate nodes. For example, it can provide access to certain I2C
+  controllers, and the I2C bindings represent each I2C controller as a
+  device tree node. Such nodes should be nested directly inside the main
+  BPMP node.
+
+  Software can determine whether a child node of the BPMP node
+  represents a device by checking for a compatible property. Any node
+  with a compatible property represents a device that can be
+  instantiated. Nodes without a compatible property may be used to
+  provide configuration information regarding the BPMP itself, although
+  no such configuration nodes are currently defined by this binding.
+
+  The BPMP firmware defines no single global name-/numbering-space for
+  such services. Put another way, the numbering scheme for I2C buses is
+  distinct from the numbering scheme for any other service the BPMP may
+  provide (e.g. a future hypothetical SPI bus service). As such, child
+  device nodes will have no reg property, and the BPMP node will have no
+  "#address-cells" or "#size-cells" property.
+
+  The shared memory area for the IPC TX and RX between CPU and BPMP are
+  predefined and work on top of sysram, which is an SRAM inside the
+  chip. See ".../sram/sram.yaml" for the bindings.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - nvidia,tegra194-bpmp
+              - nvidia,tegra234-bpmp
+          - const: nvidia,tegra186-bpmp
+      - const: nvidia,tegra186-bpmp
+
+  mboxes:
+    description: A phandle and channel specifier for the mailbox used to
+      communicate with the BPMP.
+    maxItems: 1
+
+  shmem:
+    description: List of the phandle to the TX and RX shared memory area
+      that the IPC between CPU and BPMP is based on.
+    minItems: 2
+    maxItems: 2
+
+  "#clock-cells":
+    const: 1
+
+  "#power-domain-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  interconnects:
+    items:
+      - description: memory read client
+      - description: memory write client
+      - description: DMA read client
+      - description: DMA write client
+
+  interconnect-names:
+    items:
+      - const: read
+      - const: write
+      - const: dma-mem # dma-read
+      - const: dma-write
+
+  iommus:
+    maxItems: 1
+
+  i2c:
+    type: object
+
+  thermal:
+    type: object
+
+additionalProperties: false
+
+required:
+  - compatible
+  - mboxes
+  - shmem
+  - "#clock-cells"
+  - "#power-domain-cells"
+  - "#reset-cells"
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/mailbox/tegra186-hsp.h>
+    #include <dt-bindings/memory/tegra186-mc.h>
+
+    hsp_top0: hsp@3c00000 {
+        compatible = "nvidia,tegra186-hsp";
+        reg = <0x03c00000 0xa0000>;
+        interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "doorbell";
+        #mbox-cells = <2>;
+    };
+
+    sram@30000000 {
+        compatible = "nvidia,tegra186-sysram", "mmio-sram";
+        reg = <0x30000000 0x50000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0x0 0x30000000 0x50000>;
+
+        cpu_bpmp_tx: sram@4e000 {
+            reg = <0x4e000 0x1000>;
+            label = "cpu-bpmp-tx";
+            pool;
+        };
+
+        cpu_bpmp_rx: sram@4f000 {
+            reg = <0x4f000 0x1000>;
+            label = "cpu-bpmp-rx";
+            pool;
+        };
+    };
+
+    bpmp {
+        compatible = "nvidia,tegra186-bpmp";
+        interconnects = <&mc TEGRA186_MEMORY_CLIENT_BPMPR &emc>,
+                        <&mc TEGRA186_MEMORY_CLIENT_BPMPW &emc>,
+                        <&mc TEGRA186_MEMORY_CLIENT_BPMPDMAR &emc>,
+                        <&mc TEGRA186_MEMORY_CLIENT_BPMPDMAW &emc>;
+        interconnect-names = "read", "write", "dma-mem", "dma-write";
+        iommus = <&smmu TEGRA186_SID_BPMP>;
+        mboxes = <&hsp_top0 TEGRA_HSP_MBOX_TYPE_DB
+                            TEGRA_HSP_DB_MASTER_BPMP>;
+        shmem = <&cpu_bpmp_tx>, <&cpu_bpmp_rx>;
+        #clock-cells = <1>;
+        #power-domain-cells = <1>;
+        #reset-cells = <1>;
+
+        i2c {
+            compatible = "nvidia,tegra186-bpmp-i2c";
+            nvidia,bpmp-bus-id = <5>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+        };
+
+        thermal {
+            compatible = "nvidia,tegra186-bpmp-thermal";
+            #thermal-sensor-cells = <1>;
+        };
+    };
diff --git a/dts/Bindings/firmware/qcom,scm.txt b/dts/Bindings/firmware/qcom,scm.txt
index d7e3cda892..b1cd4ad188 100644
--- a/dts/Bindings/firmware/qcom,scm.txt
+++ b/dts/Bindings/firmware/qcom,scm.txt
@@ -26,9 +26,11 @@ Required properties:
  * "qcom,scm-sc7280"
  * "qcom,scm-sdm845"
  * "qcom,scm-sdx55"
+ * "qcom,scm-sm6350"
  * "qcom,scm-sm8150"
  * "qcom,scm-sm8250"
  * "qcom,scm-sm8350"
+ * "qcom,scm-sm8450"
  and:
  * "qcom,scm"
 - clocks: Specifies clocks needed by the SCM interface, if any:
diff --git a/dts/Bindings/fuse/nvidia,tegra20-fuse.txt b/dts/Bindings/fuse/nvidia,tegra20-fuse.txt
deleted file mode 100644
index b109911669..0000000000
--- a/dts/Bindings/fuse/nvidia,tegra20-fuse.txt
+++ /dev/null
@@ -1,42 +0,0 @@
-NVIDIA Tegra20/Tegra30/Tegr114/Tegra124 fuse block.
-
-Required properties:
-- compatible : For Tegra20, must contain "nvidia,tegra20-efuse".  For Tegra30,
-  must contain "nvidia,tegra30-efuse".  For Tegra114, must contain
-  "nvidia,tegra114-efuse".  For Tegra124, must contain "nvidia,tegra124-efuse".
-  For Tegra132 must contain "nvidia,tegra132-efuse", "nvidia,tegra124-efuse".
-  For Tegra210 must contain "nvidia,tegra210-efuse". For Tegra186 must contain
-  "nvidia,tegra186-efuse". For Tegra194 must contain "nvidia,tegra194-efuse".
-  For Tegra234 must contain "nvidia,tegra234-efuse".
-  Details:
-  nvidia,tegra20-efuse: Tegra20 requires using APB DMA to read the fuse data
-	due to a hardware bug. Tegra20 also lacks certain information which is
-	available in later generations such as fab code, lot code, wafer id,..
-  nvidia,tegra30-efuse, nvidia,tegra114-efuse and nvidia,tegra124-efuse:
-	The differences between these SoCs are the size of the efuse array,
-	the location of the spare (OEM programmable) bits and the location of
-	the speedo data.
-- reg: Should contain 1 entry: the entry gives the physical address and length
-       of the fuse registers.
-- clocks: Must contain an entry for each entry in clock-names.
-  See ../clocks/clock-bindings.txt for details.
-- clock-names: Must include the following entries:
-  - fuse
-- resets: Must contain an entry for each entry in reset-names.
-  See ../reset/reset.txt for details.
-- reset-names: Must include the following entries:
- - fuse
-
-Example:
-
-	fuse@7000f800 {
-		compatible = "nvidia,tegra20-efuse";
-		reg = <0x7000f800 0x400>,
-		      <0x70000000 0x400>;
-		clocks = <&tegra_car TEGRA20_CLK_FUSE>;
-		clock-names = "fuse";
-		resets = <&tegra_car 39>;
-		reset-names = "fuse";
-	};
-
-
diff --git a/dts/Bindings/fuse/nvidia,tegra20-fuse.yaml b/dts/Bindings/fuse/nvidia,tegra20-fuse.yaml
new file mode 100644
index 0000000000..4819012698
--- /dev/null
+++ b/dts/Bindings/fuse/nvidia,tegra20-fuse.yaml
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fuse/nvidia,tegra20-fuse.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra FUSE block
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - nvidia,tegra20-efuse
+          - nvidia,tegra30-efuse
+          - nvidia,tegra114-efuse
+          - nvidia,tegra124-efuse
+          - nvidia,tegra210-efuse
+          - nvidia,tegra186-efuse
+          - nvidia,tegra194-efuse
+          - nvidia,tegra234-efuse
+
+      - items:
+          - const: nvidia,tegra132-efuse
+          - const: nvidia,tegra124-efuse
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: fuse
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: fuse
+
+  operating-points-v2:
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+
+  power-domains:
+    items:
+      - description: phandle to the core power domain
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - nvidia,tegra20-efuse
+          - nvidia,tegra30-efuse
+          - nvidia,tegra114-efuse
+          - nvidia,tegra124-efuse
+          - nvidia,tegra132-efuse
+          - nvidia,tegra210-efuse
+then:
+  required:
+    - resets
+    - reset-names
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra20-car.h>
+
+    fuse@7000f800 {
+        compatible = "nvidia,tegra20-efuse";
+        reg = <0x7000f800 0x400>;
+        clocks = <&tegra_car TEGRA20_CLK_FUSE>;
+        clock-names = "fuse";
+        resets = <&tegra_car 39>;
+        reset-names = "fuse";
+    };
diff --git a/dts/Bindings/gpio/brcm,brcmstb-gpio.txt b/dts/Bindings/gpio/brcm,brcmstb-gpio.txt
deleted file mode 100644
index 5d468ecd18..0000000000
--- a/dts/Bindings/gpio/brcm,brcmstb-gpio.txt
+++ /dev/null
@@ -1,83 +0,0 @@
-Broadcom STB "UPG GIO" GPIO controller
-
-The controller's registers are organized as sets of eight 32-bit
-registers with each set controlling a bank of up to 32 pins.  A single
-interrupt is shared for all of the banks handled by the controller.
-
-Required properties:
-
-- compatible:
-    Must be "brcm,brcmstb-gpio"
-
-- reg:
-    Define the base and range of the I/O address space containing
-    the brcmstb GPIO controller registers
-
-- #gpio-cells:
-    Should be <2>.  The first cell is the pin number (within the controller's
-    pin space), and the second is used for the following:
-    bit[0]: polarity (0 for active-high, 1 for active-low)
-
-- gpio-controller:
-    Specifies that the node is a GPIO controller.
-
-- brcm,gpio-bank-widths:
-    Number of GPIO lines for each bank.  Number of elements must
-    correspond to number of banks suggested by the 'reg' property.
-
-Optional properties:
-
-- interrupts:
-    The interrupt shared by all GPIO lines for this controller.
-
-- interrupts-extended:
-    Alternate form of specifying interrupts and parents that allows for
-    multiple parents.  This takes precedence over 'interrupts' and
-    'interrupt-parent'.  Wakeup-capable GPIO controllers often route their
-    wakeup interrupt lines through a different interrupt controller than the
-    primary interrupt line, making this property necessary.
-
-- #interrupt-cells:
-    Should be <2>.  The first cell is the GPIO number, the second should specify
-    flags.  The following subset of flags is supported:
-    - bits[3:0] trigger type and level flags
-        1 = low-to-high edge triggered
-        2 = high-to-low edge triggered
-        4 = active high level-sensitive
-        8 = active low level-sensitive
-      Valid combinations are 1, 2, 3, 4, 8.
-    See also Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
-
-- interrupt-controller:
-    Marks the device node as an interrupt controller
-
-- wakeup-source:
-    GPIOs for this controller can be used as a wakeup source
-
-Example:
-	upg_gio: gpio@f040a700 {
-		#gpio-cells = <2>;
-		#interrupt-cells = <2>;
-		compatible = "brcm,bcm7445-gpio", "brcm,brcmstb-gpio";
-		gpio-controller;
-		interrupt-controller;
-		reg = <0xf040a700 0x80>;
-		interrupt-parent = <&irq0_intc>;
-		interrupts = <0x6>;
-		brcm,gpio-bank-widths = <32 32 32 24>;
-	};
-
-	upg_gio_aon: gpio@f04172c0 {
-		#gpio-cells = <2>;
-		#interrupt-cells = <2>;
-		compatible = "brcm,bcm7445-gpio", "brcm,brcmstb-gpio";
-		gpio-controller;
-		interrupt-controller;
-		reg = <0xf04172c0 0x40>;
-		interrupt-parent = <&irq0_aon_intc>;
-		interrupts = <0x6>;
-		interrupts-extended = <&irq0_aon_intc 0x6>,
-			<&aon_pm_l2_intc 0x5>;
-		wakeup-source;
-		brcm,gpio-bank-widths = <18 4>;
-	};
diff --git a/dts/Bindings/gpio/brcm,brcmstb-gpio.yaml b/dts/Bindings/gpio/brcm,brcmstb-gpio.yaml
new file mode 100644
index 0000000000..4a896ff7ed
--- /dev/null
+++ b/dts/Bindings/gpio/brcm,brcmstb-gpio.yaml
@@ -0,0 +1,104 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/brcm,brcmstb-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom STB "UPG GIO" GPIO controller
+
+description: >
+  The controller's registers are organized as sets of eight 32-bit
+  registers with each set controlling a bank of up to 32 pins.  A single
+  interrupt is shared for all of the banks handled by the controller.
+
+maintainers:
+  - Doug Berger <opendmb@gmail.com>
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - brcm,bcm7445-gpio
+      - const: brcm,brcmstb-gpio
+
+  reg:
+    maxItems: 1
+    description: >
+      Define the base and range of the I/O address space containing
+      the brcmstb GPIO controller registers
+
+  "#gpio-cells":
+    const: 2
+    description: >
+      The first cell is the pin number (within the controller's
+      pin space), and the second is used for the following:
+      bit[0]: polarity (0 for active-high, 1 for active-low)
+
+  gpio-controller: true
+
+  brcm,gpio-bank-widths:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: >
+      Number of GPIO lines for each bank.  Number of elements must
+      correspond to number of banks suggested by the 'reg' property.
+
+  interrupts:
+    maxItems: 1
+    description: >
+      The interrupt shared by all GPIO lines for this controller.
+
+  "#interrupt-cells":
+    const: 2
+    description: |
+      The first cell is the GPIO number, the second should specify
+      flags.  The following subset of flags is supported:
+      - bits[3:0] trigger type and level flags
+        1 = low-to-high edge triggered
+        2 = high-to-low edge triggered
+        4 = active high level-sensitive
+        8 = active low level-sensitive
+      Valid combinations are 1, 2, 3, 4, 8.
+
+  interrupt-controller: true
+
+  wakeup-source:
+    type: boolean
+    description: >
+      GPIOs for this controller can be used as a wakeup source
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - "#gpio-cells"
+  - "brcm,gpio-bank-widths"
+
+additionalProperties: false
+
+examples:
+  - |
+    upg_gio: gpio@f040a700 {
+        #gpio-cells = <2>;
+        #interrupt-cells = <2>;
+        compatible = "brcm,bcm7445-gpio", "brcm,brcmstb-gpio";
+        gpio-controller;
+        interrupt-controller;
+        reg = <0xf040a700 0x80>;
+        interrupt-parent = <&irq0_intc>;
+        interrupts = <0x6>;
+        brcm,gpio-bank-widths = <32 32 32 24>;
+    };
+
+    upg_gio_aon: gpio@f04172c0 {
+        #gpio-cells = <2>;
+        #interrupt-cells = <2>;
+        compatible = "brcm,bcm7445-gpio", "brcm,brcmstb-gpio";
+        gpio-controller;
+        interrupt-controller;
+        reg = <0xf04172c0 0x40>;
+        interrupt-parent = <&irq0_aon_intc>;
+        interrupts = <0x6>;
+        wakeup-source;
+        brcm,gpio-bank-widths = <18 4>;
+    };
diff --git a/dts/Bindings/gpio/gpio-samsung.txt b/dts/Bindings/gpio/gpio-samsung.txt
deleted file mode 100644
index 5375625e8c..0000000000
--- a/dts/Bindings/gpio/gpio-samsung.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-Samsung Exynos4 GPIO Controller
-
-Required properties:
-- compatible: Compatible property value should be "samsung,exynos4-gpio>".
-
-- reg: Physical base address of the controller and length of memory mapped
-  region.
-
-- #gpio-cells: Should be 4. The syntax of the gpio specifier used by client nodes
-  should be the following with values derived from the SoC user manual.
-     <[phandle of the gpio controller node]
-      [pin number within the gpio controller]
-      [mux function]
-      [flags and pull up/down]
-      [drive strength]>
-
-  Values for gpio specifier:
-  - Pin number: is a value between 0 to 7.
-  - Flags and Pull Up/Down: 0 - Pull Up/Down Disabled.
-                            1 - Pull Down Enabled.
-                            3 - Pull Up Enabled.
-          Bit 16 (0x00010000) - Input is active low.
-  - Drive Strength: 0 - 1x,
-                    1 - 3x,
-                    2 - 2x,
-                    3 - 4x
-
-- gpio-controller: Specifies that the node is a gpio controller.
-- #address-cells: should be 1.
-- #size-cells: should be 1.
-
-Example:
-
-	gpa0: gpio-controller@11400000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "samsung,exynos4-gpio";
-		reg = <0x11400000 0x20>;
-		#gpio-cells = <4>;
-		gpio-controller;
-	};
diff --git a/dts/Bindings/gpio/gpio-vf610.yaml b/dts/Bindings/gpio/gpio-vf610.yaml
index 19738a457a..e1359391d3 100644
--- a/dts/Bindings/gpio/gpio-vf610.yaml
+++ b/dts/Bindings/gpio/gpio-vf610.yaml
@@ -24,6 +24,9 @@ properties:
       - items:
           - const: fsl,imx7ulp-gpio
           - const: fsl,vf610-gpio
+      - items:
+          - const: fsl,imx8ulp-gpio
+          - const: fsl,imx7ulp-gpio
 
   reg:
     description: The first reg tuple represents the PORT module, the second tuple
diff --git a/dts/Bindings/gpio/mstar,msc313-gpio.yaml b/dts/Bindings/gpio/mstar,msc313-gpio.yaml
index fe1e1c63ff..18fe90387b 100644
--- a/dts/Bindings/gpio/mstar,msc313-gpio.yaml
+++ b/dts/Bindings/gpio/mstar,msc313-gpio.yaml
@@ -14,7 +14,9 @@ properties:
     pattern: "^gpio@[0-9a-f]+$"
 
   compatible:
-    const: mstar,msc313-gpio
+    enum:
+      - mstar,msc313-gpio
+      - sstar,ssd20xd-gpio
 
   reg:
     maxItems: 1
diff --git a/dts/Bindings/gpio/nvidia,tegra186-gpio.txt b/dts/Bindings/gpio/nvidia,tegra186-gpio.txt
deleted file mode 100644
index adff16c71d..0000000000
--- a/dts/Bindings/gpio/nvidia,tegra186-gpio.txt
+++ /dev/null
@@ -1,165 +0,0 @@
-NVIDIA Tegra186 GPIO controllers
-
-Tegra186 contains two GPIO controllers; a main controller and an "AON"
-controller. This binding document applies to both controllers. The register
-layouts for the controllers share many similarities, but also some significant
-differences. Hence, this document describes closely related but different
-bindings and compatible values.
-
-The Tegra186 GPIO controller allows software to set the IO direction of, and
-read/write the value of, numerous GPIO signals. Routing of GPIO signals to
-package balls is under the control of a separate pin controller HW block. Two
-major sets of registers exist:
-
-a) Security registers, which allow configuration of allowed access to the GPIO
-register set. These registers exist in a single contiguous block of physical
-address space. The size of this block, and the security features available,
-varies between the different GPIO controllers.
-
-Access to this set of registers is not necessary in all circumstances. Code
-that wishes to configure access to the GPIO registers needs access to these
-registers to do so. Code which simply wishes to read or write GPIO data does not
-need access to these registers.
-
-b) GPIO registers, which allow manipulation of the GPIO signals. In some GPIO
-controllers, these registers are exposed via multiple "physical aliases" in
-address space, each of which access the same underlying state. See the hardware
-documentation for rationale. Any particular GPIO client is expected to access
-just one of these physical aliases.
-
-Tegra HW documentation describes a unified naming convention for all GPIOs
-implemented by the SoC. Each GPIO is assigned to a port, and a port may control
-a number of GPIOs. Thus, each GPIO is named according to an alphabetical port
-name and an integer GPIO name within the port. For example, GPIO_PA0, GPIO_PN6,
-or GPIO_PCC3.
-
-The number of ports implemented by each GPIO controller varies. The number of
-implemented GPIOs within each port varies. GPIO registers within a controller
-are grouped and laid out according to the port they affect.
-
-The mapping from port name to the GPIO controller that implements that port, and
-the mapping from port name to register offset within a controller, are both
-extremely non-linear. The header file <dt-bindings/gpio/tegra186-gpio.h>
-describes the port-level mapping. In that file, the naming convention for ports
-matches the HW documentation. The values chosen for the names are alphabetically
-sorted within a particular controller. Drivers need to map between the DT GPIO
-IDs and HW register offsets using a lookup table.
-
-Each GPIO controller can generate a number of interrupt signals. Each signal
-represents the aggregate status for all GPIOs within a set of ports. Thus, the
-number of interrupt signals generated by a controller varies as a rough function
-of the number of ports it implements. Note that the HW documentation refers to
-both the overall controller HW module and the sets-of-ports as "controllers".
-
-Each GPIO controller in fact generates multiple interrupts signals for each set
-of ports. Each GPIO may be configured to feed into a specific one of the
-interrupt signals generated by a set-of-ports. The intent is for each generated
-signal to be routed to a different CPU, thus allowing different CPUs to each
-handle subsets of the interrupts within a port. The status of each of these
-per-port-set signals is reported via a separate register. Thus, a driver needs
-to know which status register to observe. This binding currently defines no
-configuration mechanism for this. By default, drivers should use register
-GPIO_${port}_INTERRUPT_STATUS_G1_0. Future revisions to the binding could
-define a property to configure this.
-
-Required properties:
-- compatible
-    Array of strings.
-    One of:
-    - "nvidia,tegra186-gpio".
-    - "nvidia,tegra186-gpio-aon".
-    - "nvidia,tegra194-gpio".
-    - "nvidia,tegra194-gpio-aon".
-- reg-names
-    Array of strings.
-    Contains a list of names for the register spaces described by the reg
-    property. May contain the following entries, in any order:
-    - "gpio": Mandatory. GPIO control registers. This may cover either:
-        a) The single physical alias that this OS should use.
-        b) All physical aliases that exist in the controller. This is
-           appropriate when the OS is responsible for managing assignment of
-           the physical aliases.
-    - "security": Optional. Security configuration registers.
-    Users of this binding MUST look up entries in the reg property by name,
-    using this reg-names property to do so.
-- reg
-    Array of (physical base address, length) tuples.
-    Must contain one entry per entry in the reg-names property, in a matching
-    order.
-- interrupts
-    Array of interrupt specifiers.
-    The interrupt outputs from the HW block, one per set of ports, in the
-    order the HW manual describes them. The number of entries required varies
-    depending on compatible value:
-    - "nvidia,tegra186-gpio": 6 entries.
-    - "nvidia,tegra186-gpio-aon": 1 entry.
-    - "nvidia,tegra194-gpio": 6 entries.
-    - "nvidia,tegra194-gpio-aon": 1 entry.
-- gpio-controller
-    Boolean.
-    Marks the device node as a GPIO controller/provider.
-- #gpio-cells
-    Single-cell integer.
-    Must be <2>.
-    Indicates how many cells are used in a consumer's GPIO specifier.
-    In the specifier:
-    - The first cell is the pin number.
-        See <dt-bindings/gpio/tegra186-gpio.h>.
-    - The second cell contains flags:
-        - Bit 0 specifies polarity
-            - 0: Active-high (normal).
-            - 1: Active-low (inverted).
-- interrupt-controller
-    Boolean.
-    Marks the device node as an interrupt controller/provider.
-- #interrupt-cells
-    Single-cell integer.
-    Must be <2>.
-    Indicates how many cells are used in a consumer's interrupt specifier.
-    In the specifier:
-    - The first cell is the GPIO number.
-        See <dt-bindings/gpio/tegra186-gpio.h>.
-    - The second cell is contains flags:
-        - Bits [3:0] indicate trigger type and level:
-            - 1: Low-to-high edge triggered.
-            - 2: High-to-low edge triggered.
-            - 4: Active high level-sensitive.
-            - 8: Active low level-sensitive.
-            Valid combinations are 1, 2, 3, 4, 8.
-
-Example:
-
-#include <dt-bindings/interrupt-controller/irq.h>
-
-gpio@2200000 {
-	compatible = "nvidia,tegra186-gpio";
-	reg-names = "security", "gpio";
-	reg =
-		<0x0 0x2200000 0x0 0x10000>,
-		<0x0 0x2210000 0x0 0x10000>;
-	interrupts =
-		<0 47 IRQ_TYPE_LEVEL_HIGH>,
-		<0 50 IRQ_TYPE_LEVEL_HIGH>,
-		<0 53 IRQ_TYPE_LEVEL_HIGH>,
-		<0 56 IRQ_TYPE_LEVEL_HIGH>,
-		<0 59 IRQ_TYPE_LEVEL_HIGH>,
-		<0 180 IRQ_TYPE_LEVEL_HIGH>;
-	gpio-controller;
-	#gpio-cells = <2>;
-	interrupt-controller;
-	#interrupt-cells = <2>;
-};
-
-gpio@c2f0000 {
-	compatible = "nvidia,tegra186-gpio-aon";
-	reg-names = "security", "gpio";
-	reg =
-		<0x0 0xc2f0000 0x0 0x1000>,
-		<0x0 0xc2f1000 0x0 0x1000>;
-	interrupts =
-		<0 60 IRQ_TYPE_LEVEL_HIGH>;
-	gpio-controller;
-	#gpio-cells = <2>;
-	interrupt-controller;
-	#interrupt-cells = <2>;
-};
diff --git a/dts/Bindings/gpio/nvidia,tegra186-gpio.yaml b/dts/Bindings/gpio/nvidia,tegra186-gpio.yaml
new file mode 100644
index 0000000000..4ef06b2ff1
--- /dev/null
+++ b/dts/Bindings/gpio/nvidia,tegra186-gpio.yaml
@@ -0,0 +1,214 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/nvidia,tegra186-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra GPIO Controller (Tegra186 and later)
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+description: |
+  Tegra186 contains two GPIO controllers; a main controller and an "AON"
+  controller. This binding document applies to both controllers. The register
+  layouts for the controllers share many similarities, but also some
+  significant differences. Hence, this document describes closely related but
+  different bindings and compatible values.
+
+  The Tegra186 GPIO controller allows software to set the IO direction of,
+  and read/write the value of, numerous GPIO signals. Routing of GPIO signals
+  to package balls is under the control of a separate pin controller hardware
+  block. Two major sets of registers exist:
+
+    a) Security registers, which allow configuration of allowed access to the
+       GPIO register set. These registers exist in a single contiguous block
+       of physical address space. The size of this block, and the security
+       features available, varies between the different GPIO controllers.
+
+       Access to this set of registers is not necessary in all circumstances.
+       Code that wishes to configure access to the GPIO registers needs access
+       to these registers to do so. Code which simply wishes to read or write
+       GPIO data does not need access to these registers.
+
+    b) GPIO registers, which allow manipulation of the GPIO signals. In some
+       GPIO controllers, these registers are exposed via multiple "physical
+       aliases" in address space, each of which access the same underlying
+       state. See the hardware documentation for rationale. Any particular
+       GPIO client is expected to access just one of these physical aliases.
+
+    Tegra HW documentation describes a unified naming convention for all GPIOs
+    implemented by the SoC. Each GPIO is assigned to a port, and a port may
+    control a number of GPIOs. Thus, each GPIO is named according to an
+    alphabetical port name and an integer GPIO name within the port. For
+    example, GPIO_PA0, GPIO_PN6, or GPIO_PCC3.
+
+    The number of ports implemented by each GPIO controller varies. The number
+    of implemented GPIOs within each port varies. GPIO registers within a
+    controller are grouped and laid out according to the port they affect.
+
+    The mapping from port name to the GPIO controller that implements that
+    port, and the mapping from port name to register offset within a
+    controller, are both extremely non-linear. The header file
+    <dt-bindings/gpio/tegra186-gpio.h> describes the port-level mapping. In
+    that file, the naming convention for ports matches the HW documentation.
+    The values chosen for the names are alphabetically sorted within a
+    particular controller. Drivers need to map between the DT GPIO IDs and HW
+    register offsets using a lookup table.
+
+    Each GPIO controller can generate a number of interrupt signals. Each
+    signal represents the aggregate status for all GPIOs within a set of
+    ports. Thus, the number of interrupt signals generated by a controller
+    varies as a rough function of the number of ports it implements. Note
+    that the HW documentation refers to both the overall controller HW
+    module and the sets-of-ports as "controllers".
+
+    Each GPIO controller in fact generates multiple interrupts signals for
+    each set of ports. Each GPIO may be configured to feed into a specific
+    one of the interrupt signals generated by a set-of-ports. The intent is
+    for each generated signal to be routed to a different CPU, thus allowing
+    different CPUs to each handle subsets of the interrupts within a port.
+    The status of each of these per-port-set signals is reported via a
+    separate register. Thus, a driver needs to know which status register to
+    observe. This binding currently defines no configuration mechanism for
+    this. By default, drivers should use register
+    GPIO_${port}_INTERRUPT_STATUS_G1_0. Future revisions to the binding could
+    define a property to configure this.
+
+properties:
+  compatible:
+    enum:
+      - nvidia,tegra186-gpio
+      - nvidia,tegra186-gpio-aon
+      - nvidia,tegra194-gpio
+      - nvidia,tegra194-gpio-aon
+      - nvidia,tegra234-gpio
+      - nvidia,tegra234-gpio-aon
+
+  reg-names:
+    items:
+      - const: security
+      - const: gpio
+    minItems: 1
+
+  reg:
+    items:
+      - description: Security configuration registers.
+      - description: |
+          GPIO control registers. This may cover either:
+
+            a) The single physical alias that this OS should use.
+            b) All physical aliases that exist in the controller. This is
+               appropriate when the OS is responsible for managing assignment
+               of the physical aliases.
+    minItems: 1
+
+  interrupts:
+    description: The interrupt outputs from the HW block, one per set of
+      ports, in the order the HW manual describes them. The number of entries
+      required varies depending on compatible value.
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    description: |
+      Indicates how many cells are used in a consumer's GPIO specifier. In the
+      specifier:
+
+        - The first cell is the pin number.
+          See <dt-bindings/gpio/tegra186-gpio.h>.
+        - The second cell contains flags:
+          - Bit 0 specifies polarity
+            - 0: Active-high (normal).
+            - 1: Active-low (inverted).
+    const: 2
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    description: |
+      Indicates how many cells are used in a consumer's interrupt specifier.
+      In the specifier:
+
+        - The first cell is the GPIO number.
+          See <dt-bindings/gpio/tegra186-gpio.h>.
+        - The second cell is contains flags:
+          - Bits [3:0] indicate trigger type and level:
+            - 1: Low-to-high edge triggered.
+            - 2: High-to-low edge triggered.
+            - 4: Active high level-sensitive.
+            - 8: Active low level-sensitive.
+
+            Valid combinations are 1, 2, 3, 4, 8.
+    const: 2
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra186-gpio
+              - nvidia,tegra194-gpio
+              - nvidia,tegra234-gpio
+    then:
+      properties:
+        interrupts:
+          minItems: 6
+          maxItems: 48
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra186-gpio-aon
+              - nvidia,tegra194-gpio-aon
+              - nvidia,tegra234-gpio-aon
+    then:
+      properties:
+        interrupts:
+          minItems: 1
+          maxItems: 4
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    gpio@2200000 {
+        compatible = "nvidia,tegra186-gpio";
+        reg-names = "security", "gpio";
+        reg = <0x2200000 0x10000>,
+              <0x2210000 0x10000>;
+        interrupts = <0  47 IRQ_TYPE_LEVEL_HIGH>,
+                     <0  50 IRQ_TYPE_LEVEL_HIGH>,
+                     <0  53 IRQ_TYPE_LEVEL_HIGH>,
+                     <0  56 IRQ_TYPE_LEVEL_HIGH>,
+                     <0  59 IRQ_TYPE_LEVEL_HIGH>,
+                     <0 180 IRQ_TYPE_LEVEL_HIGH>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+    };
+
+    gpio@c2f0000 {
+        compatible = "nvidia,tegra186-gpio-aon";
+        reg-names = "security", "gpio";
+        reg = <0xc2f0000 0x1000>,
+              <0xc2f1000 0x1000>;
+        interrupts = <0 60 IRQ_TYPE_LEVEL_HIGH>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+    };
diff --git a/dts/Bindings/gpio/nvidia,tegra20-gpio.txt b/dts/Bindings/gpio/nvidia,tegra20-gpio.txt
deleted file mode 100644
index 023c9526e5..0000000000
--- a/dts/Bindings/gpio/nvidia,tegra20-gpio.txt
+++ /dev/null
@@ -1,40 +0,0 @@
-NVIDIA Tegra GPIO controller
-
-Required properties:
-- compatible : "nvidia,tegra<chip>-gpio"
-- reg : Physical base address and length of the controller's registers.
-- interrupts : The interrupt outputs from the controller. For Tegra20,
-  there should be 7 interrupts specified, and for Tegra30, there should
-  be 8 interrupts specified.
-- #gpio-cells : Should be two. The first cell is the pin number and the
-  second cell is used to specify optional parameters:
-  - bit 0 specifies polarity (0 for normal, 1 for inverted)
-- gpio-controller : Marks the device node as a GPIO controller.
-- #interrupt-cells : Should be 2.
-  The first cell is the GPIO number.
-  The second cell is used to specify flags:
-    bits[3:0] trigger type and level flags:
-      1 = low-to-high edge triggered.
-      2 = high-to-low edge triggered.
-      4 = active high level-sensitive.
-      8 = active low level-sensitive.
-      Valid combinations are 1, 2, 3, 4, 8.
-- interrupt-controller : Marks the device node as an interrupt controller.
-
-Example:
-
-gpio: gpio@6000d000 {
-	compatible = "nvidia,tegra20-gpio";
-	reg = < 0x6000d000 0x1000 >;
-	interrupts = < 0 32 0x04
-		       0 33 0x04
-		       0 34 0x04
-		       0 35 0x04
-		       0 55 0x04
-		       0 87 0x04
-		       0 89 0x04 >;
-	#gpio-cells = <2>;
-	gpio-controller;
-	#interrupt-cells = <2>;
-	interrupt-controller;
-};
diff --git a/dts/Bindings/gpio/nvidia,tegra20-gpio.yaml b/dts/Bindings/gpio/nvidia,tegra20-gpio.yaml
new file mode 100644
index 0000000000..94b51749ee
--- /dev/null
+++ b/dts/Bindings/gpio/nvidia,tegra20-gpio.yaml
@@ -0,0 +1,110 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/nvidia,tegra20-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra GPIO Controller (Tegra20 - Tegra210)
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - nvidia,tegra20-gpio
+          - nvidia,tegra30-gpio
+
+      - items:
+          - enum:
+              - nvidia,tegra114-gpio
+              - nvidia,tegra124-gpio
+              - nvidia,tegra210-gpio
+          - const: nvidia,tegra30-gpio
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: The interrupt outputs from the controller. For Tegra20,
+      there should be 7 interrupts specified, and for Tegra30, there should
+      be 8 interrupts specified.
+
+  "#gpio-cells":
+    description: The first cell is the pin number and the second cell is used
+      to specify the GPIO polarity (0 = active high, 1 = active low).
+    const: 2
+
+  gpio-controller: true
+
+  gpio-ranges:
+    maxItems: 1
+
+  "#interrupt-cells":
+    description: |
+      Should be 2. The first cell is the GPIO number. The second cell is
+      used to specify flags:
+
+        bits[3:0] trigger type and level flags:
+          1 = low-to-high edge triggered.
+          2 = high-to-low edge triggered.
+          4 = active high level-sensitive.
+          8 = active low level-sensitive.
+
+      Valid combinations are 1, 2, 3, 4, 8.
+    const: 2
+
+  interrupt-controller: true
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: nvidia,tegra30-gpio
+    then:
+      properties:
+        interrupts:
+          minItems: 8
+          maxItems: 8
+    else:
+      properties:
+        interrupts:
+          minItems: 7
+          maxItems: 7
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#gpio-cells"
+  - gpio-controller
+  - "#interrupt-cells"
+  - interrupt-controller
+
+additionalProperties:
+  type: object
+  required:
+    - gpio-hog
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    gpio: gpio@6000d000 {
+        compatible = "nvidia,tegra20-gpio";
+        reg = <0x6000d000 0x1000>;
+        interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+        #gpio-cells = <2>;
+        gpio-controller;
+        #interrupt-cells = <2>;
+        interrupt-controller;
+    };
diff --git a/dts/Bindings/gpio/sifive,gpio.yaml b/dts/Bindings/gpio/sifive,gpio.yaml
index c2902aac25..e04349567e 100644
--- a/dts/Bindings/gpio/sifive,gpio.yaml
+++ b/dts/Bindings/gpio/sifive,gpio.yaml
@@ -77,7 +77,8 @@ examples:
       gpio@10060000 {
         compatible = "sifive,fu540-c000-gpio", "sifive,gpio0";
         interrupt-parent = <&plic>;
-        interrupts = <7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22>;
+        interrupts = <7>, <8>, <9>, <10>, <11>, <12>, <13>, <14>, <15>, <16>,
+                     <17>, <18>, <19>, <20>, <21>, <22>;
         reg = <0x10060000 0x1000>;
         clocks = <&tlclk PRCI_CLK_TLCLK>;
         gpio-controller;
diff --git a/dts/Bindings/gpio/toshiba,gpio-visconti.yaml b/dts/Bindings/gpio/toshiba,gpio-visconti.yaml
index 9ad470e019..b085450b52 100644
--- a/dts/Bindings/gpio/toshiba,gpio-visconti.yaml
+++ b/dts/Bindings/gpio/toshiba,gpio-visconti.yaml
@@ -43,7 +43,6 @@ required:
   - gpio-controller
   - interrupt-controller
   - "#interrupt-cells"
-  - interrupt-parent
 
 additionalProperties: false
 
diff --git a/dts/Bindings/gpu/arm,mali-bifrost.yaml b/dts/Bindings/gpu/arm,mali-bifrost.yaml
index 6f98dd55fb..63a08f3f32 100644
--- a/dts/Bindings/gpu/arm,mali-bifrost.yaml
+++ b/dts/Bindings/gpu/arm,mali-bifrost.yaml
@@ -19,6 +19,7 @@ properties:
           - amlogic,meson-g12a-mali
           - mediatek,mt8183-mali
           - realtek,rtd1619-mali
+          - renesas,r9a07g044-mali
           - rockchip,px30-mali
           - rockchip,rk3568-mali
       - const: arm,mali-bifrost # Mali Bifrost GPU model/revision is fully discoverable
@@ -27,19 +28,26 @@ properties:
     maxItems: 1
 
   interrupts:
+    minItems: 3
     items:
       - description: Job interrupt
       - description: MMU interrupt
       - description: GPU interrupt
+      - description: Event interrupt
 
   interrupt-names:
+    minItems: 3
     items:
       - const: job
       - const: mmu
       - const: gpu
+      - const: event
 
   clocks:
-    maxItems: 1
+    minItems: 1
+    maxItems: 3
+
+  clock-names: true
 
   mali-supply: true
 
@@ -52,7 +60,10 @@ properties:
     maxItems: 3
 
   resets:
-    maxItems: 2
+    minItems: 1
+    maxItems: 3
+
+  reset-names: true
 
   "#cooling-cells":
     const: 2
@@ -98,6 +109,36 @@ allOf:
       properties:
         compatible:
           contains:
+            const: renesas,r9a07g044-mali
+    then:
+      properties:
+        interrupts:
+          minItems: 4
+        interrupt-names:
+          minItems: 4
+        clocks:
+          minItems: 3
+        clock-names:
+          items:
+            - const: gpu
+            - const: bus
+            - const: bus_ace
+        resets:
+          minItems: 3
+        reset-names:
+          items:
+            - const: rst
+            - const: axi_rst
+            - const: ace_rst
+      required:
+        - clock-names
+        - power-domains
+        - resets
+        - reset-names
+  - if:
+      properties:
+        compatible:
+          contains:
             const: mediatek,mt8183-mali
     then:
       properties:
diff --git a/dts/Bindings/gpu/host1x/nvidia,tegra210-nvenc.yaml b/dts/Bindings/gpu/host1x/nvidia,tegra210-nvenc.yaml
new file mode 100644
index 0000000000..e63ae1a008
--- /dev/null
+++ b/dts/Bindings/gpu/host1x/nvidia,tegra210-nvenc.yaml
@@ -0,0 +1,135 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/gpu/host1x/nvidia,tegra210-nvenc.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Device tree binding for NVIDIA Tegra NVENC
+
+description: |
+  NVENC is the hardware video encoder present on NVIDIA Tegra210
+  and newer chips. It is located on the Host1x bus and typically
+  programmed through Host1x channels.
+
+maintainers:
+  - Thierry Reding <treding@gmail.com>
+  - Mikko Perttunen <mperttunen@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^nvenc@[0-9a-f]*$"
+
+  compatible:
+    enum:
+      - nvidia,tegra210-nvenc
+      - nvidia,tegra186-nvenc
+      - nvidia,tegra194-nvenc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: nvenc
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: nvenc
+
+  power-domains:
+    maxItems: 1
+
+  iommus:
+    maxItems: 1
+
+  dma-coherent: true
+
+  interconnects:
+    minItems: 2
+    maxItems: 3
+
+  interconnect-names:
+    minItems: 2
+    maxItems: 3
+
+  nvidia,host1x-class:
+    description: |
+      Host1x class of the engine, used to specify the targeted engine
+      when programming the engine through Host1x channels or when
+      configuring engine-specific behavior in Host1x.
+    default: 0x21
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - power-domains
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          enum:
+            - nvidia,tegra210-nvenc
+            - nvidia,tegra186-nvenc
+    then:
+      properties:
+        interconnects:
+          items:
+            - description: DMA read memory client
+            - description: DMA write memory client
+        interconnect-names:
+          items:
+            - const: dma-mem
+            - const: write
+  - if:
+      properties:
+        compatible:
+          enum:
+            - nvidia,tegra194-nvenc
+    then:
+      properties:
+        interconnects:
+          items:
+            - description: DMA read memory client
+            - description: DMA read 2 memory client
+            - description: DMA write memory client
+        interconnect-names:
+          items:
+            - const: dma-mem
+            - const: read-1
+            - const: write
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra186-clock.h>
+    #include <dt-bindings/memory/tegra186-mc.h>
+    #include <dt-bindings/power/tegra186-powergate.h>
+    #include <dt-bindings/reset/tegra186-reset.h>
+
+    nvenc@154c0000 {
+            compatible = "nvidia,tegra186-nvenc";
+            reg = <0x154c0000 0x40000>;
+            clocks = <&bpmp TEGRA186_CLK_NVENC>;
+            clock-names = "nvenc";
+            resets = <&bpmp TEGRA186_RESET_NVENC>;
+            reset-names = "nvenc";
+
+            power-domains = <&bpmp TEGRA186_POWER_DOMAIN_MPE>;
+            interconnects = <&mc TEGRA186_MEMORY_CLIENT_NVENCSRD &emc>,
+                            <&mc TEGRA186_MEMORY_CLIENT_NVENCSWR &emc>;
+            interconnect-names = "dma-mem", "write";
+            iommus = <&smmu TEGRA186_SID_NVENC>;
+    };
diff --git a/dts/Bindings/gpu/host1x/nvidia,tegra210-nvjpg.yaml b/dts/Bindings/gpu/host1x/nvidia,tegra210-nvjpg.yaml
new file mode 100644
index 0000000000..8647404d67
--- /dev/null
+++ b/dts/Bindings/gpu/host1x/nvidia,tegra210-nvjpg.yaml
@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/gpu/host1x/nvidia,tegra210-nvjpg.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Device tree binding for NVIDIA Tegra NVJPG
+
+description: |
+  NVJPG is the hardware JPEG decoder and encoder present on NVIDIA Tegra210
+  and newer chips. It is located on the Host1x bus and typically programmed
+  through Host1x channels.
+
+maintainers:
+  - Thierry Reding <treding@gmail.com>
+  - Mikko Perttunen <mperttunen@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^nvjpg@[0-9a-f]*$"
+
+  compatible:
+    enum:
+      - nvidia,tegra210-nvjpg
+      - nvidia,tegra186-nvjpg
+      - nvidia,tegra194-nvjpg
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: nvjpg
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: nvjpg
+
+  power-domains:
+    maxItems: 1
+
+  iommus:
+    maxItems: 1
+
+  dma-coherent: true
+
+  interconnects:
+    items:
+      - description: DMA read memory client
+      - description: DMA write memory client
+
+  interconnect-names:
+    items:
+      - const: dma-mem
+      - const: write
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - power-domains
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra186-clock.h>
+    #include <dt-bindings/memory/tegra186-mc.h>
+    #include <dt-bindings/power/tegra186-powergate.h>
+    #include <dt-bindings/reset/tegra186-reset.h>
+
+    nvjpg@15380000 {
+            compatible = "nvidia,tegra186-nvjpg";
+            reg = <0x15380000 0x40000>;
+            clocks = <&bpmp TEGRA186_CLK_NVJPG>;
+            clock-names = "nvjpg";
+            resets = <&bpmp TEGRA186_RESET_NVJPG>;
+            reset-names = "nvjpg";
+
+            power-domains = <&bpmp TEGRA186_POWER_DOMAIN_NVJPG>;
+            interconnects = <&mc TEGRA186_MEMORY_CLIENT_NVJPGSRD &emc>,
+                            <&mc TEGRA186_MEMORY_CLIENT_NVJPGSWR &emc>;
+            interconnect-names = "dma-mem", "write";
+            iommus = <&smmu TEGRA186_SID_NVJPG>;
+    };
diff --git a/dts/Bindings/hwmon/ntc-thermistor.yaml b/dts/Bindings/hwmon/ntc-thermistor.yaml
index 9e77cee07d..3d3b139a91 100644
--- a/dts/Bindings/hwmon/ntc-thermistor.yaml
+++ b/dts/Bindings/hwmon/ntc-thermistor.yaml
@@ -76,6 +76,7 @@ properties:
       - const: murata,ncp15wl333
       - const: murata,ncp03wf104
       - const: murata,ncp15xh103
+      - const: samsung,1404-001221
       # Deprecated "ntp," compatible strings
       - const: ntc,ncp15wb473
         deprecated: true
diff --git a/dts/Bindings/hwmon/ti,ina2xx.yaml b/dts/Bindings/hwmon/ti,ina2xx.yaml
index 6f0443322a..47af97bb4c 100644
--- a/dts/Bindings/hwmon/ti,ina2xx.yaml
+++ b/dts/Bindings/hwmon/ti,ina2xx.yaml
@@ -26,6 +26,7 @@ properties:
       - ti,ina226
       - ti,ina230
       - ti,ina231
+      - ti,ina238
 
   reg:
     maxItems: 1
@@ -35,6 +36,27 @@ properties:
       Shunt resistor value in micro-Ohm.
     $ref: /schemas/types.yaml#/definitions/uint32
 
+  ti,shunt-gain:
+    description: |
+      Programmable gain divisor for the shunt voltage accuracy and range. This
+      property only applies to devices that have configurable PGA/ADCRANGE. The
+      gain value is used configure the gain and to convert the shunt voltage,
+      current and power register values when reading measurements from the
+      device.
+
+      For devices that have a configurable PGA (e.g. INA209, INA219, INA220),
+      the gain value maps directly with the PG bits of the config register.
+
+      For devices that have ADCRANGE configuration (e.g. INA238) a shunt-gain
+      value of 1 maps to ADCRANGE=1 where no gain divisor is applied to the
+      shunt voltage, and a value of 4 maps to ADCRANGE=0 such that a wider
+      voltage range is used.
+
+      The default value is device dependent, and is defined by the reset value
+      of PGA/ADCRANGE in the respective configuration registers.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2, 4, 8]
+
 required:
   - compatible
   - reg
diff --git a/dts/Bindings/i2c/apple,i2c.yaml b/dts/Bindings/i2c/apple,i2c.yaml
index 82b953181a..4ac61fec90 100644
--- a/dts/Bindings/i2c/apple,i2c.yaml
+++ b/dts/Bindings/i2c/apple,i2c.yaml
@@ -21,7 +21,9 @@ allOf:
 properties:
   compatible:
     items:
-      - const: apple,t8103-i2c
+      - enum:
+          - apple,t8103-i2c
+          - apple,t6000-i2c
       - const: apple,i2c
 
   reg:
@@ -40,6 +42,9 @@ properties:
       used. This frequency is generated by dividing the reference clock.
       Allowed values are between ref_clk/(16*4) and ref_clk/(16*255).
 
+  power-domains:
+    maxItems: 1
+
 required:
   - compatible
   - reg
diff --git a/dts/Bindings/i2c/aspeed,i2c.yaml b/dts/Bindings/i2c/aspeed,i2c.yaml
index ea643e6c3e..f597f73ccd 100644
--- a/dts/Bindings/i2c/aspeed,i2c.yaml
+++ b/dts/Bindings/i2c/aspeed,i2c.yaml
@@ -63,7 +63,6 @@ examples:
     i2c0: i2c-bus@40 {
       #address-cells = <1>;
       #size-cells = <0>;
-      #interrupt-cells = <1>;
       compatible = "aspeed,ast2500-i2c-bus";
       reg = <0x40 0x40>;
       clocks = <&syscon ASPEED_CLK_APB>;
diff --git a/dts/Bindings/i2c/brcm,bcm2835-i2c.txt b/dts/Bindings/i2c/brcm,bcm2835-i2c.txt
deleted file mode 100644
index a8a35df419..0000000000
--- a/dts/Bindings/i2c/brcm,bcm2835-i2c.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-Broadcom BCM2835 I2C controller
-
-Required properties:
-- compatible : Should be one of:
-	"brcm,bcm2711-i2c"
-	"brcm,bcm2835-i2c"
-- reg: Should contain register location and length.
-- interrupts: Should contain interrupt.
-- clocks : The clock feeding the I2C controller.
-
-Recommended properties:
-- clock-frequency : desired I2C bus clock frequency in Hz.
-
-Example:
-
-i2c@7e205000 {
-	compatible = "brcm,bcm2835-i2c";
-	reg = <0x7e205000 0x1000>;
-	interrupts = <2 21>;
-	clocks = <&clk_i2c>;
-	clock-frequency = <100000>;
-};
diff --git a/dts/Bindings/i2c/brcm,bcm2835-i2c.yaml b/dts/Bindings/i2c/brcm,bcm2835-i2c.yaml
new file mode 100644
index 0000000000..8256490a7a
--- /dev/null
+++ b/dts/Bindings/i2c/brcm,bcm2835-i2c.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/brcm,bcm2835-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM2835 I2C controller
+
+maintainers:
+  - Stephen Warren <swarren@wwwdotorg.org>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - brcm,bcm2835-i2c
+      - items:
+          - const: brcm,bcm2711-i2c
+          - const: brcm,bcm2835-i2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clock-names:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-frequency: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c@7e205000 {
+        compatible = "brcm,bcm2835-i2c";
+        reg = <0x7e205000 0x1000>;
+        interrupts = <2 21>;
+        clocks = <&clk_i2c>;
+        clock-frequency = <100000>;
+    };
diff --git a/dts/Bindings/i2c/google,cros-ec-i2c-tunnel.yaml b/dts/Bindings/i2c/google,cros-ec-i2c-tunnel.yaml
index b386e4128a..6e1c70e927 100644
--- a/dts/Bindings/i2c/google,cros-ec-i2c-tunnel.yaml
+++ b/dts/Bindings/i2c/google,cros-ec-i2c-tunnel.yaml
@@ -10,7 +10,6 @@ title: I2C bus that tunnels through the ChromeOS EC (cros-ec)
 maintainers:
   - Doug Anderson <dianders@chromium.org>
   - Benson Leung <bleung@chromium.org>
-  - Enric Balletbo i Serra <enric.balletbo@collabora.com>
 
 description: |
   On some ChromeOS board designs we've got a connection to the EC
diff --git a/dts/Bindings/i2c/i2c-exynos5.txt b/dts/Bindings/i2c/i2c-exynos5.txt
deleted file mode 100644
index 2dbc0b62da..0000000000
--- a/dts/Bindings/i2c/i2c-exynos5.txt
+++ /dev/null
@@ -1,53 +0,0 @@
-* Samsung's High Speed I2C controller
-
-The Samsung's High Speed I2C controller is used to interface with I2C devices
-at various speeds ranging from 100khz to 3.4Mhz.
-
-Required properties:
-  - compatible: value should be.
-	-> "samsung,exynos5-hsi2c", (DEPRECATED)
-				for i2c compatible with HSI2C available
-				on Exynos5250 and Exynos5420 SoCs.
-	-> "samsung,exynos5250-hsi2c", for i2c compatible with HSI2C available
-				on Exynos5250 and Exynos5420 SoCs.
-	-> "samsung,exynos5260-hsi2c", for i2c compatible with HSI2C available
-				on Exynos5260 SoCs.
-	-> "samsung,exynos7-hsi2c", for i2c compatible with HSI2C available
-				on Exynos7 SoCs.
-
-  - reg: physical base address of the controller and length of memory mapped
-    region.
-  - interrupts: interrupt number to the cpu.
-  - #address-cells: always 1 (for i2c addresses)
-  - #size-cells: always 0
-
-  - Pinctrl:
-    - pinctrl-0: Pin control group to be used for this controller.
-    - pinctrl-names: Should contain only one value - "default".
-
-Optional properties:
-  - clock-frequency: Desired operating frequency in Hz of the bus.
-    -> If not specified, the bus operates in fast-speed mode at
-       at 100khz.
-    -> If specified, the bus operates in high-speed mode only if the
-       clock-frequency is >= 1Mhz.
-
-Example:
-
-hsi2c@12ca0000 {
-	compatible = "samsung,exynos5250-hsi2c";
-	reg = <0x12ca0000 0x100>;
-	interrupts = <56>;
-	clock-frequency = <100000>;
-
-	pinctrl-0 = <&i2c4_bus>;
-	pinctrl-names = "default";
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	s2mps11_pmic@66 {
-		compatible = "samsung,s2mps11-pmic";
-		reg = <0x66>;
-	};
-};
diff --git a/dts/Bindings/i2c/i2c-exynos5.yaml b/dts/Bindings/i2c/i2c-exynos5.yaml
new file mode 100644
index 0000000000..19874e8b73
--- /dev/null
+++ b/dts/Bindings/i2c/i2c-exynos5.yaml
@@ -0,0 +1,133 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/i2c-exynos5.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung's High Speed I2C controller
+
+maintainers:
+  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+
+description: |
+  The Samsung's High Speed I2C controller is used to interface with I2C devices
+  at various speeds ranging from 100kHz to 3.4MHz.
+
+  In case the HSI2C controller is encapsulated within USI block (it's the case
+  e.g. for Exynos850 and Exynos Auto V9 SoCs), it might be also necessary to
+  define USI node in device tree file, choosing "i2c" configuration. Please see
+  Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml for details.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - samsung,exynos5250-hsi2c    # Exynos5250 and Exynos5420
+          - samsung,exynos5260-hsi2c    # Exynos5260
+          - samsung,exynos7-hsi2c       # Exynos7
+          - samsung,exynosautov9-hsi2c  # ExynosAutoV9 and Exynos850
+      - const: samsung,exynos5-hsi2c    # Exynos5250 and Exynos5420
+        deprecated: true
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clock-frequency:
+    default: 100000
+    description:
+      Desired operating frequency in Hz of the bus.
+
+      If not specified, the bus operates in fast-speed mode at 100kHz.
+
+      If specified, the bus operates in high-speed mode only if the
+      clock-frequency is >= 1MHz.
+
+  clocks:
+    minItems: 1
+    items:
+      - description: I2C operating clock
+      - description: Bus clock (APB)
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: hsi2c
+      - const: hsi2c_pclk
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,exynosautov9-hsi2c
+
+    then:
+      properties:
+        clocks:
+          minItems: 2
+
+        clock-names:
+          minItems: 2
+
+      required:
+        - clock-names
+
+    else:
+      properties:
+        clocks:
+          maxItems: 1
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5420.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    hsi2c_8: i2c@12e00000 {
+        compatible = "samsung,exynos5250-hsi2c";
+        reg = <0x12e00000 0x1000>;
+        interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        clock-frequency = <100000>;
+        clocks = <&clock CLK_USI4>;
+        clock-names = "hsi2c";
+
+        pmic@66 {
+            /* compatible = "samsung,s2mps11-pmic"; */
+            reg = <0x66>;
+        };
+    };
+
+  - |
+    #include <dt-bindings/clock/exynos850.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    hsi2c_2: i2c@138c0000 {
+        compatible = "samsung,exynosautov9-hsi2c";
+        reg = <0x138c0000 0xc0>;
+        interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        clocks = <&cmu_peri CLK_GOUT_HSI2C2_IPCLK>,
+                 <&cmu_peri CLK_GOUT_HSI2C2_PCLK>;
+        clock-names = "hsi2c", "hsi2c_pclk";
+
+        pmic@66 {
+            /* compatible = "samsung,s2mps11-pmic"; */
+            reg = <0x66>;
+        };
+    };
diff --git a/dts/Bindings/i2c/i2c-gate.yaml b/dts/Bindings/i2c/i2c-gate.yaml
index 66472f12a7..bd67b07665 100644
--- a/dts/Bindings/i2c/i2c-gate.yaml
+++ b/dts/Bindings/i2c/i2c-gate.yaml
@@ -31,7 +31,7 @@ examples:
         #address-cells = <1>;
         #size-cells = <0>;
         ak8975@c {
-            compatible = "ak,ak8975";
+            compatible = "asahi-kasei,ak8975";
             reg = <0x0c>;
         };
     };
diff --git a/dts/Bindings/i2c/i2c-imx-lpi2c.yaml b/dts/Bindings/i2c/i2c-imx-lpi2c.yaml
index fe0c89edf7..529bea56d3 100644
--- a/dts/Bindings/i2c/i2c-imx-lpi2c.yaml
+++ b/dts/Bindings/i2c/i2c-imx-lpi2c.yaml
@@ -20,7 +20,9 @@ properties:
       - items:
           - enum:
               - fsl,imx8qxp-lpi2c
+              - fsl,imx8dxl-lpi2c
               - fsl,imx8qm-lpi2c
+              - fsl,imx8ulp-lpi2c
           - const: fsl,imx7ulp-lpi2c
 
   reg:
diff --git a/dts/Bindings/i2c/i2c-mux-gpio.txt b/dts/Bindings/i2c/i2c-mux-gpio.txt
deleted file mode 100644
index d4cf10582a..0000000000
--- a/dts/Bindings/i2c/i2c-mux-gpio.txt
+++ /dev/null
@@ -1,80 +0,0 @@
-GPIO-based I2C Bus Mux
-
-This binding describes an I2C bus multiplexer that uses GPIOs to
-route the I2C signals.
-
-                                  +-----+  +-----+
-                                  | dev |  | dev |
-    +------------+                +-----+  +-----+
-    | SoC        |                   |        |
-    |            |          /--------+--------+
-    |   +------+ |  +------+    child bus A, on GPIO value set to 0
-    |   | I2C  |-|--| Mux  |
-    |   +------+ |  +--+---+    child bus B, on GPIO value set to 1
-    |            |     |    \----------+--------+--------+
-    |   +------+ |     |               |        |        |
-    |   | GPIO |-|-----+            +-----+  +-----+  +-----+
-    |   +------+ |                  | dev |  | dev |  | dev |
-    +------------+                  +-----+  +-----+  +-----+
-
-Required properties:
-- compatible: i2c-mux-gpio
-- i2c-parent: The phandle of the I2C bus that this multiplexer's master-side
-  port is connected to.
-- mux-gpios: list of gpios used to control the muxer
-* Standard I2C mux properties. See i2c-mux.yaml in this directory.
-* I2C child bus nodes. See i2c-mux.yaml in this directory.
-
-Optional properties:
-- idle-state: value to set the muxer to when idle. When no value is
-  given, it defaults to the last value used.
-
-For each i2c child node, an I2C child bus will be created. They will
-be numbered based on their order in the device tree.
-
-Whenever an access is made to a device on a child bus, the value set
-in the relevant node's reg property will be output using the list of
-GPIOs, the first in the list holding the least-significant value.
-
-If an idle state is defined, using the idle-state (optional) property,
-whenever an access is not being made to a device on a child bus, the
-GPIOs will be set according to the idle value.
-
-If an idle state is not defined, the most recently used value will be
-left programmed into hardware whenever no access is being made to a
-device on a child bus.
-
-Example:
-	i2cmux {
-		compatible = "i2c-mux-gpio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		mux-gpios = <&gpio1 22 0 &gpio1 23 0>;
-		i2c-parent = <&i2c1>;
-
-		i2c@1 {
-			reg = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			ssd1307: oled@3c {
-				compatible = "solomon,ssd1307fb-i2c";
-				reg = <0x3c>;
-				pwms = <&pwm 4 3000>;
-				reset-gpios = <&gpio2 7 1>;
-			};
-		};
-
-		i2c@3 {
-			reg = <3>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			pca9555: pca9555@20 {
-				compatible = "nxp,pca9555";
-				gpio-controller;
-				#gpio-cells = <2>;
-				reg = <0x20>;
-			};
-		};
-	};
diff --git a/dts/Bindings/i2c/i2c-mux-gpio.yaml b/dts/Bindings/i2c/i2c-mux-gpio.yaml
new file mode 100644
index 0000000000..6e0a5686af
--- /dev/null
+++ b/dts/Bindings/i2c/i2c-mux-gpio.yaml
@@ -0,0 +1,104 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/i2c-mux-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GPIO-based I2C Bus Mux
+
+maintainers:
+  - Wolfram Sang <wsa@kernel.org>
+
+description: |
+  This binding describes an I2C bus multiplexer that uses GPIOs to route the I2C signals.
+
+                                  +-----+  +-----+
+                                  | dev |  | dev |
+    +------------+                +-----+  +-----+
+    | SoC        |                   |        |
+    |            |          /--------+--------+
+    |   +------+ |  +------+    child bus A, on GPIO value set to 0
+    |   | I2C  |-|--| Mux  |
+    |   +------+ |  +--+---+    child bus B, on GPIO value set to 1
+    |            |     |    \----------+--------+--------+
+    |   +------+ |     |               |        |        |
+    |   | GPIO |-|-----+            +-----+  +-----+  +-----+
+    |   +------+ |                  | dev |  | dev |  | dev |
+    +------------+                  +-----+  +-----+  +-----+
+
+  For each I2C child node, an I2C child bus will be created. They will be numbered based on their
+  order in the device tree.
+
+  Whenever an access is made to a device on a child bus, the value set in the relevant node's reg
+  property will be output using the list of GPIOs, the first in the list holding the least-
+  significant value.
+
+  If an idle state is defined, using the idle-state (optional) property, whenever an access is not
+  being made to a device on a child bus, the GPIOs will be set according to the idle value.
+
+  If an idle state is not defined, the most recently used value will be left programmed into
+  hardware whenever no access is being made to a device on a child bus.
+
+properties:
+  compatible:
+    const: i2c-mux-gpio
+
+  i2c-parent:
+    description: phandle of the I2C bus that this multiplexer's master-side port is connected to
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+
+  mux-gpios:
+    description: list of GPIOs used to control the muxer
+    minItems: 1
+    maxItems: 4  # Should be enough
+
+  idle-state:
+    description: Value to set the muxer to when idle. When no value is given, it defaults to the
+      last value used.
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+
+allOf:
+  - $ref: i2c-mux.yaml
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - i2c-parent
+  - mux-gpios
+
+examples:
+  - |
+    i2cmux {
+      compatible = "i2c-mux-gpio";
+      #address-cells = <1>;
+      #size-cells = <0>;
+      mux-gpios = <&gpio1 22 0>, <&gpio1 23 0>;
+      i2c-parent = <&i2c1>;
+
+      i2c@1 {
+        reg = <1>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ssd1307: oled@3c {
+          compatible = "solomon,ssd1307fb-i2c";
+          reg = <0x3c>;
+          pwms = <&pwm 4 3000>;
+          reset-gpios = <&gpio2 7 1>;
+        };
+      };
+
+      i2c@3 {
+        reg = <3>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pca9555: pca9555@20 {
+          compatible = "nxp,pca9555";
+          gpio-controller;
+          #gpio-cells = <2>;
+          reg = <0x20>;
+        };
+      };
+    };
diff --git a/dts/Bindings/i2c/i2c-mux-pinctrl.txt b/dts/Bindings/i2c/i2c-mux-pinctrl.txt
deleted file mode 100644
index 997a287ed3..0000000000
--- a/dts/Bindings/i2c/i2c-mux-pinctrl.txt
+++ /dev/null
@@ -1,93 +0,0 @@
-Pinctrl-based I2C Bus Mux
-
-This binding describes an I2C bus multiplexer that uses pin multiplexing to
-route the I2C signals, and represents the pin multiplexing configuration
-using the pinctrl device tree bindings.
-
-                                 +-----+  +-----+
-                                 | dev |  | dev |
-    +------------------------+   +-----+  +-----+
-    | SoC                    |      |        |
-    |                   /----|------+--------+
-    |   +---+   +------+     | child bus A, on first set of pins
-    |   |I2C|---|Pinmux|     |
-    |   +---+   +------+     | child bus B, on second set of pins
-    |                   \----|------+--------+--------+
-    |                        |      |        |        |
-    +------------------------+  +-----+  +-----+  +-----+
-                                | dev |  | dev |  | dev |
-                                +-----+  +-----+  +-----+
-
-Required properties:
-- compatible: i2c-mux-pinctrl
-- i2c-parent: The phandle of the I2C bus that this multiplexer's master-side
-  port is connected to.
-
-Also required are:
-
-* Standard pinctrl properties that specify the pin mux state for each child
-  bus. See ../pinctrl/pinctrl-bindings.txt.
-
-* Standard I2C mux properties. See i2c-mux.yaml in this directory.
-
-* I2C child bus nodes. See i2c-mux.yaml in this directory.
-
-For each named state defined in the pinctrl-names property, an I2C child bus
-will be created. I2C child bus numbers are assigned based on the index into
-the pinctrl-names property.
-
-The only exception is that no bus will be created for a state named "idle". If
-such a state is defined, it must be the last entry in pinctrl-names. For
-example:
-
-	pinctrl-names = "ddc", "pta", "idle"  ->  ddc = bus 0, pta = bus 1
-	pinctrl-names = "ddc", "idle", "pta"  ->  Invalid ("idle" not last)
-	pinctrl-names = "idle", "ddc", "pta"  ->  Invalid ("idle" not last)
-
-Whenever an access is made to a device on a child bus, the relevant pinctrl
-state will be programmed into hardware.
-
-If an idle state is defined, whenever an access is not being made to a device
-on a child bus, the idle pinctrl state will be programmed into hardware.
-
-If an idle state is not defined, the most recently used pinctrl state will be
-left programmed into hardware whenever no access is being made of a device on
-a child bus.
-
-Example:
-
-	i2cmux {
-		compatible = "i2c-mux-pinctrl";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		i2c-parent = <&i2c1>;
-
-		pinctrl-names = "ddc", "pta", "idle";
-		pinctrl-0 = <&state_i2cmux_ddc>;
-		pinctrl-1 = <&state_i2cmux_pta>;
-		pinctrl-2 = <&state_i2cmux_idle>;
-
-		i2c@0 {
-			reg = <0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			eeprom {
-				compatible = "eeprom";
-				reg = <0x50>;
-			};
-		};
-
-		i2c@1 {
-			reg = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			eeprom {
-				compatible = "eeprom";
-				reg = <0x50>;
-			};
-		};
-	};
-
diff --git a/dts/Bindings/i2c/i2c-mux-pinctrl.yaml b/dts/Bindings/i2c/i2c-mux-pinctrl.yaml
new file mode 100644
index 0000000000..2e3d555eb9
--- /dev/null
+++ b/dts/Bindings/i2c/i2c-mux-pinctrl.yaml
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/i2c-mux-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Pinctrl-based I2C Bus Mux
+
+maintainers:
+  - Wolfram Sang <wsa@kernel.org>
+
+description: |
+  This binding describes an I2C bus multiplexer that uses pin multiplexing to route the I2C
+  signals, and represents the pin multiplexing configuration using the pinctrl device tree
+  bindings.
+
+                                 +-----+  +-----+
+                                 | dev |  | dev |
+    +------------------------+   +-----+  +-----+
+    | SoC                    |      |        |
+    |                   /----|------+--------+
+    |   +---+   +------+     | child bus A, on first set of pins
+    |   |I2C|---|Pinmux|     |
+    |   +---+   +------+     | child bus B, on second set of pins
+    |                   \----|------+--------+--------+
+    |                        |      |        |        |
+    +------------------------+  +-----+  +-----+  +-----+
+                                | dev |  | dev |  | dev |
+                                +-----+  +-----+  +-----+
+
+  For each named state defined in the pinctrl-names property, an I2C child bus will be created.
+  I2C child bus numbers are assigned based on the index into the pinctrl-names property.
+
+  The only exception is that no bus will be created for a state named "idle". If such a state is
+  defined, it must be the last entry in pinctrl-names. For example:
+
+    pinctrl-names = "ddc", "pta", "idle"  ->  ddc = bus 0, pta = bus 1
+    pinctrl-names = "ddc", "idle", "pta"  ->  Invalid ("idle" not last)
+    pinctrl-names = "idle", "ddc", "pta"  ->  Invalid ("idle" not last)
+
+  Whenever an access is made to a device on a child bus, the relevant pinctrl state will be
+  programmed into hardware.
+
+  If an idle state is defined, whenever an access is not being made to a device on a child bus,
+  the idle pinctrl state will be programmed into hardware.
+
+  If an idle state is not defined, the most recently used pinctrl state will be left programmed
+  into hardware whenever no access is being made of a device on a child bus.
+
+properties:
+  compatible:
+    const: i2c-mux-pinctrl
+
+  i2c-parent:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: The phandle of the I2C bus that this multiplexer's master-side port is connected
+      to.
+
+allOf:
+  - $ref: i2c-mux.yaml
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - i2c-parent
+
+examples:
+  - |
+    i2cmux {
+      compatible = "i2c-mux-pinctrl";
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      i2c-parent = <&i2c1>;
+
+      pinctrl-names = "ddc", "pta", "idle";
+      pinctrl-0 = <&state_i2cmux_ddc>;
+      pinctrl-1 = <&state_i2cmux_pta>;
+      pinctrl-2 = <&state_i2cmux_idle>;
+
+      i2c@0 {
+        reg = <0>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        eeprom@50 {
+          compatible = "atmel,24c02";
+          reg = <0x50>;
+        };
+      };
+
+      i2c@1 {
+        reg = <1>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        eeprom@50 {
+          compatible = "atmel,24c02";
+          reg = <0x50>;
+        };
+      };
+    };
diff --git a/dts/Bindings/i2c/nvidia,tegra186-bpmp-i2c.txt b/dts/Bindings/i2c/nvidia,tegra186-bpmp-i2c.txt
deleted file mode 100644
index ab240e10de..0000000000
--- a/dts/Bindings/i2c/nvidia,tegra186-bpmp-i2c.txt
+++ /dev/null
@@ -1,42 +0,0 @@
-NVIDIA Tegra186 BPMP I2C controller
-
-In Tegra186, the BPMP (Boot and Power Management Processor) owns certain HW
-devices, such as the I2C controller for the power management I2C bus. Software
-running on other CPUs must perform IPC to the BPMP in order to execute
-transactions on that I2C bus. This binding describes an I2C bus that is
-accessed in such a fashion.
-
-The BPMP I2C node must be located directly inside the main BPMP node. See
-../firmware/nvidia,tegra186-bpmp.txt for details of the BPMP binding.
-
-This node represents an I2C controller. See ../i2c/i2c.txt for details of the
-core I2C binding.
-
-Required properties:
-- compatible:
-    Array of strings.
-    One of:
-    - "nvidia,tegra186-bpmp-i2c".
-- #address-cells: Address cells for I2C device address.
-    Single-cell integer.
-    Must be <1>.
-- #size-cells:
-    Single-cell integer.
-    Must be <0>.
-- nvidia,bpmp-bus-id:
-    Single-cell integer.
-    Indicates the I2C bus number this DT node represent, as defined by the
-    BPMP firmware.
-
-Example:
-
-bpmp {
-	...
-
-	i2c {
-		compatible = "nvidia,tegra186-bpmp-i2c";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		nvidia,bpmp-bus-id = <5>;
-	};
-};
diff --git a/dts/Bindings/i2c/nvidia,tegra186-bpmp-i2c.yaml b/dts/Bindings/i2c/nvidia,tegra186-bpmp-i2c.yaml
new file mode 100644
index 0000000000..b8319dcf3d
--- /dev/null
+++ b/dts/Bindings/i2c/nvidia,tegra186-bpmp-i2c.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/nvidia,tegra186-bpmp-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra186 (and later) BPMP I2C controller
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+description: |
+  In Tegra186 and later, the BPMP (Boot and Power Management Processor)
+  owns certain HW devices, such as the I2C controller for the power
+  management I2C bus. Software running on other CPUs must perform IPC to
+  the BPMP in order to execute transactions on that I2C bus. This
+  binding describes an I2C bus that is accessed in such a fashion.
+
+  The BPMP I2C node must be located directly inside the main BPMP node.
+  See ../firmware/nvidia,tegra186-bpmp.yaml for details of the BPMP
+  binding.
+
+  This node represents an I2C controller. See ../i2c/i2c.txt for details
+  of the core I2C binding.
+
+properties:
+  compatible:
+    const: nvidia,tegra186-bpmp-i2c
+
+  nvidia,bpmp-bus-id:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Indicates the I2C bus number this DT node represents,
+      as defined by the BPMP firmware.
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - "#address-cells"
+  - "#size-cells"
+  - nvidia,bpmp-bus-id
diff --git a/dts/Bindings/i2c/nvidia,tegra20-i2c.txt b/dts/Bindings/i2c/nvidia,tegra20-i2c.txt
deleted file mode 100644
index 3f2f990c2e..0000000000
--- a/dts/Bindings/i2c/nvidia,tegra20-i2c.txt
+++ /dev/null
@@ -1,87 +0,0 @@
-NVIDIA Tegra20/Tegra30/Tegra114 I2C controller driver.
-
-Required properties:
-- compatible : For Tegra20, must be one of "nvidia,tegra20-i2c-dvc" or
-  "nvidia,tegra20-i2c".  For Tegra30, must be "nvidia,tegra30-i2c".
-  For Tegra114, must be "nvidia,tegra114-i2c".  Otherwise, must be
-  "nvidia,<chip>-i2c", plus at least one of the above, where <chip> is
-  tegra124, tegra132, or tegra210.
-  Details of compatible are as follows:
-  nvidia,tegra20-i2c-dvc: Tegra20 has specific I2C controller called as DVC I2C
-	controller. This only support master mode of I2C communication. Register
-	interface/offset and interrupts handling are different than generic I2C
-	controller. Driver of DVC I2C controller is only compatible with
-	"nvidia,tegra20-i2c-dvc".
-  nvidia,tegra20-i2c: Tegra20 has 4 generic I2C controller. This can support
-	master and slave mode of I2C communication. The i2c-tegra driver only
-	support master mode of I2C communication. Driver of I2C controller is
-	only compatible with "nvidia,tegra20-i2c".
-  nvidia,tegra30-i2c: Tegra30 has 5 generic I2C controller. This controller is
-	very much similar to Tegra20 I2C controller with additional feature:
-	Continue Transfer Support. This feature helps to implement M_NO_START
-	as per I2C core API transfer flags. Driver of I2C controller is
-	compatible with "nvidia,tegra30-i2c" to enable the continue transfer
-	support. This is also compatible with "nvidia,tegra20-i2c" without
-	continue transfer support.
-  nvidia,tegra114-i2c: Tegra114 has 5 generic I2C controller. This controller is
-	very much similar to Tegra30 I2C controller with some hardware
-	modification:
-	 - Tegra30/Tegra20 I2C controller has 2 clock source called div-clk and
-	   fast-clk. Tegra114 has only one clock source called as div-clk and
-	   hence clock mechanism is changed in I2C controller.
-	 - Tegra30/Tegra20 I2C controller has enabled per packet transfer by
-	   default and there is no way to disable it. Tegra114 has this
-	   interrupt disable by default and SW need to enable explicitly.
-	Due to above changes, Tegra114 I2C driver makes incompatible with
-	previous hardware driver. Hence, tegra114 I2C controller is compatible
-	with "nvidia,tegra114-i2c".
-  nvidia,tegra210-i2c-vi: Tegra210 has one I2C controller that is on host1x bus
-	and is part of VE power domain and typically used for camera use-cases.
-	This VI I2C controller is mostly compatible with the programming model
-	of the regular I2C controllers with a few exceptions. The I2C registers
-	start at an offset of 0xc00 (instead of 0), registers are 16 bytes
-	apart (rather than 4) and the controller does not support slave mode.
-- reg: Should contain I2C controller registers physical address and length.
-- interrupts: Should contain I2C controller interrupts.
-- address-cells: Address cells for I2C device address.
-- size-cells: Size of the I2C device address.
-- clocks: Must contain an entry for each entry in clock-names.
-  See ../clocks/clock-bindings.txt for details.
-- clock-names: Must include the following entries:
-  Tegra20/Tegra30:
-  - div-clk
-  - fast-clk
-  Tegra114:
-  - div-clk
-  Tegra210:
-  - div-clk
-  - slow (only for nvidia,tegra210-i2c-vi compatible node)
-- resets: Must contain an entry for each entry in reset-names.
-  See ../reset/reset.txt for details.
-- reset-names: Must include the following entries:
-  - i2c
-- power-domains: Only for nvidia,tegra210-i2c-vi compatible node and must
-  include venc powergate node as vi i2c is part of VE power domain.
-  tegra210-i2c-vi:
-  - pd_venc
-- dmas: Must contain an entry for each entry in clock-names.
-  See ../dma/dma.txt for details.
-- dma-names: Must include the following entries:
-  - rx
-  - tx
-
-Example:
-
-	i2c@7000c000 {
-		compatible = "nvidia,tegra20-i2c";
-		reg = <0x7000c000 0x100>;
-		interrupts = <0 38 0x04>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&tegra_car 12>, <&tegra_car 124>;
-		clock-names = "div-clk", "fast-clk";
-		resets = <&tegra_car 12>;
-		reset-names = "i2c";
-		dmas = <&apbdma 16>, <&apbdma 16>;
-		dma-names = "rx", "tx";
-	};
diff --git a/dts/Bindings/i2c/nvidia,tegra20-i2c.yaml b/dts/Bindings/i2c/nvidia,tegra20-i2c.yaml
new file mode 100644
index 0000000000..424a4fc218
--- /dev/null
+++ b/dts/Bindings/i2c/nvidia,tegra20-i2c.yaml
@@ -0,0 +1,192 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/nvidia,tegra20-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+title: NVIDIA Tegra I2C controller driver
+
+properties:
+  compatible:
+    oneOf:
+      - description: Tegra20 has 4 generic I2C controller. This can support
+          master and slave mode of I2C communication. The i2c-tegra driver
+          only support master mode of I2C communication. Driver of I2C
+          controller is only compatible with "nvidia,tegra20-i2c".
+        const: nvidia,tegra20-i2c
+      - description: Tegra20 has specific I2C controller called as DVC I2C
+          controller. This only support master mode of I2C communication.
+          Register interface/offset and interrupts handling are different than
+          generic I2C controller. Driver of DVC I2C controller is only
+          compatible with "nvidia,tegra20-i2c-dvc".
+        const: nvidia,tegra20-i2c-dvc
+      - description: |
+          Tegra30 has 5 generic I2C controller. This controller is very much
+          similar to Tegra20 I2C controller with additional feature: Continue
+          Transfer Support. This feature helps to implement M_NO_START as per
+          I2C core API transfer flags. Driver of I2C controller is compatible
+          with "nvidia,tegra30-i2c" to enable the continue transfer support.
+          This is also compatible with "nvidia,tegra20-i2c" without continue
+          transfer support.
+        items:
+          - const: nvidia,tegra30-i2c
+          - const: nvidia,tegra20-i2c
+      - description: |
+          Tegra114 has 5 generic I2C controllers. This controller is very much
+          similar to Tegra30 I2C controller with some hardware modification:
+            - Tegra30/Tegra20 I2C controller has 2 clock source called div-clk
+              and fast-clk. Tegra114 has only one clock source called as
+              div-clk and hence clock mechanism is changed in I2C controller.
+            - Tegra30/Tegra20 I2C controller has enabled per packet transfer
+              by default and there is no way to disable it. Tegra114 has this
+              interrupt disable by default and SW need to enable explicitly.
+          Due to above changes, Tegra114 I2C driver makes incompatible with
+          previous hardware driver. Hence, Tegra114 I2C controller is
+          compatible with "nvidia,tegra114-i2c".
+        const: nvidia,tegra114-i2c
+      - description: |
+          Tegra124 has 6 generic I2C controllers. These controllers are very
+          similar to those found on Tegra114 but also contain several hardware
+          improvements and new registers.
+        const: nvidia,tegra124-i2c
+      - description: |
+          Tegra210 has 6 generic I2C controllers. These controllers are very
+          similar to those found on Tegra124.
+        items:
+          - const: nvidia,tegra210-i2c
+          - const: nvidia,tegra124-i2c
+      - description: |
+          Tegra210 has one I2C controller that is on host1x bus and is part of
+          the VE power domain and typically used for camera use-cases. This VI
+          I2C controller is mostly compatible with the programming model of
+          the regular I2C controllers with a few exceptions. The I2C registers
+          start at an offset of 0xc00 (instead of 0), registers are 16 bytes
+          apart (rather than 4) and the controller does not support slave
+          mode.
+        const: nvidia,tegra210-i2c-vi
+      - description: |
+          Tegra186 has 9 generic I2C controllers, two of which are in the AON
+          (always-on) partition of the SoC. All of these controllers are very
+          similar to those found on Tegra210.
+        const: nvidia,tegra186-i2c
+      - description: |
+          Tegra194 has 8 generic I2C controllers, two of which are in the AON
+          (always-on) partition of the SoC. All of these controllers are very
+          similar to those found on Tegra186. However, these controllers have
+          support for 64 KiB transactions whereas earlier chips supported no
+          more than 4 KiB per transactions.
+        const: nvidia,tegra194-i2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    maxItems: 2
+
+  resets:
+    items:
+      - description: module reset
+
+  reset-names:
+    items:
+      - const: i2c
+
+  dmas:
+    items:
+      - description: DMA channel for the reception FIFO
+      - description: DMA channel for the transmission FIFO
+
+  dma-names:
+    items:
+      - const: rx
+      - const: tx
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra20-i2c
+              - nvidia,tegra30-i2c
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: div-clk
+            - const: fast-clk
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: nvidia,tegra114-i2c
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: div-clk
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: nvidia,tegra210-i2c
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: div-clk
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: nvidia,tegra210-i2c-vi
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: div-clk
+            - const: slow
+        power-domains:
+          items:
+            - description: phandle to the VENC power domain
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c@7000c000 {
+        compatible = "nvidia,tegra20-i2c";
+        reg = <0x7000c000 0x100>;
+        interrupts = <0 38 0x04>;
+        clocks = <&tegra_car 12>, <&tegra_car 124>;
+        clock-names = "div-clk", "fast-clk";
+        resets = <&tegra_car 12>;
+        reset-names = "i2c";
+        dmas = <&apbdma 16>, <&apbdma 16>;
+        dma-names = "rx", "tx";
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+    };
diff --git a/dts/Bindings/i2c/st,stm32-i2c.yaml b/dts/Bindings/i2c/st,stm32-i2c.yaml
index c07289a643..46b62e1c92 100644
--- a/dts/Bindings/i2c/st,stm32-i2c.yaml
+++ b/dts/Bindings/i2c/st,stm32-i2c.yaml
@@ -112,6 +112,9 @@ examples:
           clocks = <&rcc 0 149>;
       };
 
+  - |
+    #include <dt-bindings/mfd/stm32f7-rcc.h>
+    #include <dt-bindings/clock/stm32fx-clock.h>
     //Example 2 (with st,stm32f7-i2c compatible)
       i2c@40005800 {
           compatible = "st,stm32f7-i2c";
@@ -124,6 +127,9 @@ examples:
           clocks = <&rcc 1 CLK_I2C1>;
       };
 
+  - |
+    #include <dt-bindings/mfd/stm32f7-rcc.h>
+    #include <dt-bindings/clock/stm32fx-clock.h>
     //Example 3 (with st,stm32mp15-i2c compatible on stm32mp)
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/clock/stm32mp1-clks.h>
diff --git a/dts/Bindings/iio/adc/fsl,vf610-adc.yaml b/dts/Bindings/iio/adc/fsl,vf610-adc.yaml
index 1ca571056e..925f355cc2 100644
--- a/dts/Bindings/iio/adc/fsl,vf610-adc.yaml
+++ b/dts/Bindings/iio/adc/fsl,vf610-adc.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: ADC found on Freescale vf610 and similar SoCs
 
 maintainers:
-  - Fugang Duan <fugang.duan@nxp.com>
+  - Haibo Chen <haibo.chen@nxp.com>
 
 description:
   ADCs found on vf610/i.MX6slx and upward SoCs from Freescale.
diff --git a/dts/Bindings/iio/adc/x-powers,axp209-adc.yaml b/dts/Bindings/iio/adc/x-powers,axp209-adc.yaml
index e759a5da70..d6d3d85901 100644
--- a/dts/Bindings/iio/adc/x-powers,axp209-adc.yaml
+++ b/dts/Bindings/iio/adc/x-powers,axp209-adc.yaml
@@ -27,6 +27,7 @@ description: |
    8 | batt_v
    9 | batt_chrg_i
   10 | batt_dischrg_i
+  11 | ts_v
 
   AXP22x
   ------
@@ -34,6 +35,7 @@ description: |
    1 | batt_v
    2 | batt_chrg_i
    3 | batt_dischrg_i
+   4 | ts_v
 
   AXP813
   ------
@@ -42,6 +44,7 @@ description: |
    2 | batt_v
    3 | batt_chrg_i
    4 | batt_dischrg_i
+   5 | ts_v
 
 
 properties:
diff --git a/dts/Bindings/iio/adc/xlnx,zynqmp-ams.yaml b/dts/Bindings/iio/adc/xlnx,zynqmp-ams.yaml
new file mode 100644
index 0000000000..87992db389
--- /dev/null
+++ b/dts/Bindings/iio/adc/xlnx,zynqmp-ams.yaml
@@ -0,0 +1,227 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/xlnx,zynqmp-ams.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx Zynq Ultrascale AMS controller
+
+maintainers:
+  - Anand Ashok Dumbre <anand.ashok.dumbre@xilinx.com>
+
+description: |
+  The AMS (Analog Monitoring System) includes an ADC as well as on-chip sensors
+  that can be used to sample external voltages and monitor on-die operating
+  conditions, such as temperature and supply voltage levels.
+  The AMS has two SYSMON blocks which are PL (Programmable Logic) SYSMON and
+  PS (Processing System) SYSMON.
+  All designs should have AMS registers, but PS and PL are optional. The
+  AMS controller can work with only PS, only PL and both PS and PL
+  configurations. Please specify registers according to your design. Devicetree
+  should always have AMS module property. Providing PS & PL module is optional.
+
+  AMS Channel Details
+  ```````````````````
+  Sysmon Block  |Channel|                       Details                                 |Measurement
+                |Number |                                                               |Type
+  ---------------------------------------------------------------------------------------------------------
+  AMS CTRL      |0      |System PLLs voltage measurement, VCC_PSPLL.                    |Voltage
+                |1      |Battery voltage measurement, VCC_PSBATT.                       |Voltage
+                |2      |PL Internal voltage measurement, VCCINT.                       |Voltage
+                |3      |Block RAM voltage measurement, VCCBRAM.                        |Voltage
+                |4      |PL Aux voltage measurement, VCCAUX.                            |Voltage
+                |5      |Voltage measurement for six DDR I/O PLLs, VCC_PSDDR_PLL.       |Voltage
+                |6      |VCC_PSINTFP_DDR voltage measurement.                           |Voltage
+  ---------------------------------------------------------------------------------------------------------
+  PS Sysmon     |7      |LPD temperature measurement.                                   |Temperature
+                |8      |FPD temperature measurement (REMOTE).                          |Temperature
+                |9      |VCC PS LPD voltage measurement (supply1).                      |Voltage
+                |10     |VCC PS FPD voltage measurement (supply2).                      |Voltage
+                |11     |PS Aux voltage reference (supply3).                            |Voltage
+                |12     |DDR I/O VCC voltage measurement.                               |Voltage
+                |13     |PS IO Bank 503 voltage measurement (supply5).                  |Voltage
+                |14     |PS IO Bank 500 voltage measurement (supply6).                  |Voltage
+                |15     |VCCO_PSIO1 voltage measurement.                                |Voltage
+                |16     |VCCO_PSIO2 voltage measurement.                                |Voltage
+                |17     |VCC_PS_GTR voltage measurement (VPS_MGTRAVCC).                 |Voltage
+                |18     |VTT_PS_GTR voltage measurement (VPS_MGTRAVTT).                 |Voltage
+                |19     |VCC_PSADC voltage measurement.                                 |Voltage
+  ---------------------------------------------------------------------------------------------------------
+  PL Sysmon     |20     |PL temperature measurement.                                    |Temperature
+                |21     |PL Internal voltage measurement, VCCINT.                       |Voltage
+                |22     |PL Auxiliary voltage measurement, VCCAUX.                      |Voltage
+                |23     |ADC Reference P+ voltage measurement.                          |Voltage
+                |24     |ADC Reference N- voltage measurement.                          |Voltage
+                |25     |PL Block RAM voltage measurement, VCCBRAM.                     |Voltage
+                |26     |LPD Internal voltage measurement, VCC_PSINTLP (supply4).       |Voltage
+                |27     |FPD Internal voltage measurement, VCC_PSINTFP (supply5).       |Voltage
+                |28     |PS Auxiliary voltage measurement (supply6).                    |Voltage
+                |29     |PL VCCADC voltage measurement (vccams).                        |Voltage
+                |30     |Differential analog input signal voltage measurment.           |Voltage
+                |31     |VUser0 voltage measurement (supply7).                          |Voltage
+                |32     |VUser1 voltage measurement (supply8).                          |Voltage
+                |33     |VUser2 voltage measurement (supply9).                          |Voltage
+                |34     |VUser3 voltage measurement (supply10).                         |Voltage
+                |35     |Auxiliary ch 0 voltage measurement (VAux0).                    |Voltage
+                |36     |Auxiliary ch 1 voltage measurement (VAux1).                    |Voltage
+                |37     |Auxiliary ch 2 voltage measurement (VAux2).                    |Voltage
+                |38     |Auxiliary ch 3 voltage measurement (VAux3).                    |Voltage
+                |39     |Auxiliary ch 4 voltage measurement (VAux4).                    |Voltage
+                |40     |Auxiliary ch 5 voltage measurement (VAux5).                    |Voltage
+                |41     |Auxiliary ch 6 voltage measurement (VAux6).                    |Voltage
+                |42     |Auxiliary ch 7 voltage measurement (VAux7).                    |Voltage
+                |43     |Auxiliary ch 8 voltage measurement (VAux8).                    |Voltage
+                |44     |Auxiliary ch 9 voltage measurement (VAux9).                    |Voltage
+                |45     |Auxiliary ch 10 voltage measurement (VAux10).                  |Voltage
+                |46     |Auxiliary ch 11 voltage measurement (VAux11).                  |Voltage
+                |47     |Auxiliary ch 12 voltage measurement (VAux12).                  |Voltage
+                |48     |Auxiliary ch 13 voltage measurement (VAux13).                  |Voltage
+                |49     |Auxiliary ch 14 voltage measurement (VAux14).                  |Voltage
+                |50     |Auxiliary ch 15 voltage measurement (VAux15).                  |Voltage
+  --------------------------------------------------------------------------------------------------------
+
+properties:
+  compatible:
+    enum:
+      - xlnx,zynqmp-ams
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    description: AMS Controller register space
+    maxItems: 1
+
+  ranges:
+    description:
+      Maps the child address space for PS and/or PL.
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 1
+
+  '#io-channel-cells':
+    const: 1
+
+  ams-ps@0:
+    type: object
+    description: |
+      PS (Processing System) SYSMON is memory mapped to PS. This block has
+      built-in alarm generation logic that is used to interrupt the processor
+      based on condition set.
+
+    properties:
+      compatible:
+        enum:
+          - xlnx,zynqmp-ams-ps
+
+      reg:
+        description: Register Space for PS-SYSMON
+        maxItems: 1
+
+    required:
+      - compatible
+      - reg
+
+    additionalProperties: false
+
+  ams-pl@400:
+    type: object
+    description:
+      PL-SYSMON is capable of monitoring off chip voltage and temperature.
+      PL-SYSMON block has DRP, JTAG and I2C interface to enable monitoring
+      from external master. Out of this interface currently only DRP is
+      supported. This block has alarm generation logic that is used to
+      interrupt the processor based on condition set.
+
+    properties:
+      compatible:
+        items:
+          - enum:
+              - xlnx,zynqmp-ams-pl
+
+      reg:
+        description: Register Space for PL-SYSMON.
+        maxItems: 1
+
+      '#address-cells':
+        const: 1
+
+      '#size-cells':
+        const: 0
+
+    patternProperties:
+      "^channel@([2-4][0-9]|50)$":
+        type: object
+        description:
+          Describes the external channels connected.
+
+        properties:
+          reg:
+            description:
+              Pair of pins the channel is connected to. This value is
+              same as Channel Number for a particular channel.
+            minimum: 20
+            maximum: 50
+
+          xlnx,bipolar:
+            $ref: /schemas/types.yaml#/definitions/flag
+            type: boolean
+            description:
+              If the set channel is used in bipolar mode.
+
+        required:
+          - reg
+
+        additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        xilinx_ams: ams@ffa50000 {
+            compatible = "xlnx,zynqmp-ams";
+            interrupt-parent = <&gic>;
+            interrupts = <0 56 4>;
+            reg = <0x0 0xffa50000 0x0 0x800>;
+            #address-cells = <1>;
+            #size-cells = <1>;
+            #io-channel-cells = <1>;
+            ranges = <0 0 0xffa50800 0x800>;
+
+            ams_ps: ams-ps@0 {
+                compatible = "xlnx,zynqmp-ams-ps";
+                reg = <0 0x400>;
+            };
+
+            ams_pl: ams-pl@400 {
+                compatible = "xlnx,zynqmp-ams-pl";
+                reg = <0x400 0x400>;
+                #address-cells = <1>;
+                #size-cells = <0>;
+                channel@30 {
+                    reg = <30>;
+                    xlnx,bipolar;
+                };
+                channel@31 {
+                    reg = <31>;
+                };
+                channel@38 {
+                    reg = <38>;
+                    xlnx,bipolar;
+                };
+            };
+        };
+    };
diff --git a/dts/Bindings/iio/addac/adi,ad74413r.yaml b/dts/Bindings/iio/addac/adi,ad74413r.yaml
new file mode 100644
index 0000000000..baa65a521b
--- /dev/null
+++ b/dts/Bindings/iio/addac/adi,ad74413r.yaml
@@ -0,0 +1,158 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/addac/adi,ad74413r.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD74412R/AD74413R device
+
+maintainers:
+  - Cosmin Tanislav <cosmin.tanislav@analog.com>
+
+description: |
+  The AD74412R and AD74413R are quad-channel software configurable input/output
+  solutions for building and process control applications. They contain
+  functionality for analog output, analog input, digital input, resistance
+  temperature detector, and thermocouple measurements integrated
+  into a single chip solution with an SPI interface.
+  The devices feature a 16-bit ADC and four configurable 13-bit DACs to provide
+  four configurable input/output channels and a suite of diagnostic functions.
+  The AD74413R differentiates itself from the AD74412R by being HART-compatible.
+    https://www.analog.com/en/products/ad74412r.html
+    https://www.analog.com/en/products/ad74413r.html
+
+properties:
+  compatible:
+    enum:
+      - adi,ad74412r
+      - adi,ad74413r
+
+  reg:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  spi-max-frequency:
+    maximum: 1000000
+
+  spi-cpol: true
+
+  interrupts:
+    maxItems: 1
+
+  refin-supply: true
+
+  shunt-resistor-micro-ohms:
+    description:
+      Shunt (sense) resistor value in micro-Ohms.
+    default: 100000000
+
+required:
+  - compatible
+  - reg
+  - spi-max-frequency
+  - spi-cpol
+  - refin-supply
+
+additionalProperties: false
+
+patternProperties:
+  "^channel@[0-3]$":
+    type: object
+    description: Represents the external channels which are connected to the device.
+
+    properties:
+      reg:
+        description: |
+          The channel number. It can have up to 4 channels numbered from 0 to 3.
+        minimum: 0
+        maximum: 3
+
+      adi,ch-func:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: |
+          Channel function.
+          HART functions are not supported on AD74412R.
+          0 - CH_FUNC_HIGH_IMPEDANCE
+          1 - CH_FUNC_VOLTAGE_OUTPUT
+          2 - CH_FUNC_CURRENT_OUTPUT
+          3 - CH_FUNC_VOLTAGE_INPUT
+          4 - CH_FUNC_CURRENT_INPUT_EXT_POWER
+          5 - CH_FUNC_CURRENT_INPUT_LOOP_POWER
+          6 - CH_FUNC_RESISTANCE_INPUT
+          7 - CH_FUNC_DIGITAL_INPUT_LOGIC
+          8 - CH_FUNC_DIGITAL_INPUT_LOOP_POWER
+          9 - CH_FUNC_CURRENT_INPUT_EXT_POWER_HART
+          10 - CH_FUNC_CURRENT_INPUT_LOOP_POWER_HART
+        minimum: 0
+        maximum: 10
+        default: 0
+
+      adi,gpo-comparator:
+        type: boolean
+        description: |
+          Whether to configure GPO as a comparator or not.
+          When not configured as a comparator, the GPO will be treated as an
+          output-only GPIO.
+
+    required:
+      - reg
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/iio/addac/adi,ad74413r.h>
+
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      cs-gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+      status = "okay";
+
+      ad74413r@0 {
+        compatible = "adi,ad74413r";
+        reg = <0>;
+        spi-max-frequency = <1000000>;
+        spi-cpol;
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        interrupt-parent = <&gpio>;
+        interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
+
+        refin-supply = <&ad74413r_refin>;
+
+        channel@0 {
+          reg = <0>;
+
+          adi,ch-func = <CH_FUNC_VOLTAGE_OUTPUT>;
+        };
+
+        channel@1 {
+          reg = <1>;
+
+          adi,ch-func = <CH_FUNC_CURRENT_OUTPUT>;
+        };
+
+        channel@2 {
+          reg = <2>;
+
+          adi,ch-func = <CH_FUNC_DIGITAL_INPUT_LOGIC>;
+          adi,gpo-comparator;
+        };
+
+        channel@3 {
+          reg = <3>;
+
+          adi,ch-func = <CH_FUNC_CURRENT_INPUT_EXT_POWER>;
+        };
+      };
+    };
+...
diff --git a/dts/Bindings/iio/dac/adi,ad3552r.yaml b/dts/Bindings/iio/dac/adi,ad3552r.yaml
new file mode 100644
index 0000000000..501a463e5d
--- /dev/null
+++ b/dts/Bindings/iio/dac/adi,ad3552r.yaml
@@ -0,0 +1,217 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2020 Analog Devices Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/adi,ad3552r.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD2552R DAC device driver
+
+maintainers:
+  - Mihail Chindris <mihail.chindris@analog.com>
+
+description: |
+  Bindings for the Analog Devices AD3552R DAC device and similar.
+  Datasheet can be found here:
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ad3542r.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ad3552r.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,ad3542r
+      - adi,ad3552r
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 30000000
+
+  reset-gpios:
+    maxItems: 1
+
+  ldac-gpios:
+    description: |
+      LDAC pin to be used as a hardware trigger to update the DAC channels.
+    maxItems: 1
+
+  vref-supply:
+    description:
+      The regulator to use as an external reference. If it does not exists the
+      internal reference will be used. External reference must be 2.5V
+
+  adi,vref-out-en:
+    description: Vref I/O driven by internal vref to 2.5V. If not set, Vref pin
+      will be floating.
+    type: boolean
+
+  adi,sdo-drive-strength:
+    description: |
+      Configure SDIO0 and SDIO1 strength levels:
+        - 0: low SDO drive strength.
+        - 1: medium low SDO drive strength.
+        - 2: medium high SDO drive strength.
+        - 3: high SDO drive strength
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+patternProperties:
+  "^channel@([0-1])$":
+    type: object
+    description: Configurations of the DAC Channels
+
+    additionalProperties: false
+
+    properties:
+      reg:
+        description: Channel number
+        enum: [0, 1]
+
+      adi,output-range-microvolt: true
+
+      custom-output-range-config:
+        type: object
+        description: Configuration of custom range when
+          adi,output-range-microvolt is not present.
+          The formulas for calculation the output voltages are
+            Vout_fs = 2.5 + [(GainN + Offset/1024) * 2.5 * Rfbx * 1.03]
+            Vout_zs = 2.5 - [(GainP + Offset/1024) * 2.5 * Rfbx * 1.03]
+
+        properties:
+          adi,gain-offset:
+            description: Gain offset used in the above formula
+            $ref: /schemas/types.yaml#/definitions/int32
+            maximum: 511
+            minimum: -511
+
+          adi,gain-scaling-p-inv-log2:
+            description: GainP = 1 / ( 2 ^ adi,gain-scaling-p-inv-log2)
+            $ref: /schemas/types.yaml#/definitions/uint32
+            enum: [0, 1, 2, 3]
+
+          adi,gain-scaling-n-inv-log2:
+            description: GainN = 1 / ( 2 ^ adi,gain-scaling-n-inv-log2)
+            $ref: /schemas/types.yaml#/definitions/uint32
+            enum: [0, 1, 2, 3]
+
+          adi,rfb-ohms:
+            description: Feedback Resistor
+
+        required:
+          - adi,gain-offset
+          - adi,gain-scaling-p-inv-log2
+          - adi,gain-scaling-n-inv-log2
+          - adi,rfb-ohms
+
+    required:
+      - reg
+
+    oneOf:
+      # If adi,output-range-microvolt is missing,
+      # custom-output-range-config must be used
+      - required:
+          - adi,output-range-microvolt
+
+      - required:
+          - custom-output-range-config
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: adi,ad3542r
+    then:
+      patternProperties:
+        "^channel@([0-1])$":
+          type: object
+          properties:
+            adi,output-range-microvolt:
+              description: |
+                Voltage output range of the channel as <minimum, maximum>
+                Required connections:
+                  Rfb1x for: 0 to 2.5 V; 0 to 3V; 0 to 5 V;
+                  Rfb2x for: 0 to 10 V; 2.5 to 7.5V; -5 to 5 V;
+              oneOf:
+                - items:
+                    - const: 0
+                    - enum: [2500000, 3000000, 5000000, 10000000]
+                - items:
+                    - const: -2500000
+                    - const: 7500000
+                - items:
+                    - const: -5000000
+                    - const: 5000000
+
+          required:
+            - adi,output-range-microvolt
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: adi,ad3552r
+    then:
+      patternProperties:
+        "^channel@([0-1])$":
+          type: object
+          properties:
+            adi,output-range-microvolt:
+              description: |
+                Voltage output range of the channel as <minimum, maximum>
+                Required connections:
+                  Rfb1x for: 0 to 2.5 V; 0 to 5 V;
+                  Rfb2x for: 0 to 10 V; -5 to 5 V;
+                  Rfb4x for: -10 to 10V
+              oneOf:
+                - items:
+                    - const: 0
+                    - enum: [2500000, 5000000, 10000000]
+                - items:
+                    - const: -5000000
+                    - const: 5000000
+                - items:
+                    - const: -10000000
+                    - const: 10000000
+
+required:
+  - compatible
+  - reg
+  - spi-max-frequency
+
+additionalProperties: false
+
+examples:
+  - |
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      ad3552r@0 {
+              compatible = "adi,ad3552r";
+              reg = <0>;
+              spi-max-frequency = <20000000>;
+              #address-cells = <1>;
+              #size-cells = <0>;
+              channel@0 {
+                      reg = <0>;
+                      adi,output-range-microvolt = <0 10000000>;
+              };
+              channel@1 {
+                      reg = <1>;
+                      custom-output-range-config {
+                              adi,gain-offset = <5>;
+                              adi,gain-scaling-p-inv-log2 = <1>;
+                              adi,gain-scaling-n-inv-log2 = <2>;
+                              adi,rfb-ohms = <1>;
+                      };
+            };
+        };
+    };
+...
diff --git a/dts/Bindings/iio/dac/adi,ad5755.yaml b/dts/Bindings/iio/dac/adi,ad5755.yaml
index be419ac46c..f866b88e14 100644
--- a/dts/Bindings/iio/dac/adi,ad5755.yaml
+++ b/dts/Bindings/iio/dac/adi,ad5755.yaml
@@ -125,7 +125,6 @@ oneOf:
 
 examples:
   - |
-    #include <dt-bindings/iio/adi,ad5592r.h>
     spi {
         #address-cells = <1>;
         #size-cells = <0>;
diff --git a/dts/Bindings/iio/dac/adi,ad7293.yaml b/dts/Bindings/iio/dac/adi,ad7293.yaml
new file mode 100644
index 0000000000..5ee80bf6aa
--- /dev/null
+++ b/dts/Bindings/iio/dac/adi,ad7293.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/adi,ad7293.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AD7293 12-Bit Power Amplifier Current Controller with ADC,
+       DACs, Temperature and Current Sensors
+
+maintainers:
+  - Antoniu Miclaus <antoniu.miclaus@analog.com>
+
+description: |
+   Power Amplifier drain current controller containing functionality
+   for general-purpose monitoring and control of current, voltage,
+   and temperature, integrated into a single chip solution with an
+   SPI-compatible interface.
+
+   https://www.analog.com/en/products/ad7293.html
+
+properties:
+  compatible:
+    enum:
+      - adi,ad7293
+
+  avdd-supply: true
+
+  vdrive-supply: true
+
+  reset-gpios:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 1000000
+
+required:
+  - compatible
+  - reg
+  - avdd-supply
+  - vdrive-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      ad7293@0 {
+        compatible = "adi,ad7293";
+        reg = <0>;
+        spi-max-frequency = <1000000>;
+        avdd-supply = <&avdd>;
+        vdrive-supply = <&vdrive>;
+        reset-gpios = <&gpio 10 0>;
+      };
+    };
+...
diff --git a/dts/Bindings/iio/filter/adi,admv8818.yaml b/dts/Bindings/iio/filter/adi,admv8818.yaml
new file mode 100644
index 0000000000..b77e855bd5
--- /dev/null
+++ b/dts/Bindings/iio/filter/adi,admv8818.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/filter/adi,admv8818.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ADMV8818 Digitally Tunable, High-Pass and Low-Pass Filter
+
+maintainers:
+  - Antoniu Miclaus <antoniu.miclaus@analog.com>
+
+description: |
+    Fully monolithic microwave integrated circuit (MMIC) that
+    features a digitally selectable frequency of operation.
+    The device features four independently controlled high-pass
+    filters (HPFs) and four independently controlled low-pass filters
+    (LPFs) that span the 2 GHz to 18 GHz frequency range.
+
+    https://www.analog.com/en/products/admv8818.html
+
+properties:
+  compatible:
+    enum:
+      - adi,admv8818
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 10000000
+
+  clocks:
+    description:
+      Definition of the external clock.
+    minItems: 1
+
+  clock-names:
+    items:
+      - const: rf_in
+
+  clock-output-names:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      admv8818@0 {
+        compatible = "adi,admv8818";
+        reg = <0>;
+        spi-max-frequency = <10000000>;
+        clocks = <&admv8818_rfin>;
+        clock-names = "rf_in";
+      };
+    };
+...
diff --git a/dts/Bindings/iio/frequency/adi,admv1013.yaml b/dts/Bindings/iio/frequency/adi,admv1013.yaml
new file mode 100644
index 0000000000..23f1f3b55a
--- /dev/null
+++ b/dts/Bindings/iio/frequency/adi,admv1013.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/frequency/adi,admv1013.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ADMV1013 Microwave Upconverter
+
+maintainers:
+  - Antoniu Miclaus <antoniu.miclaus@analog.com>
+
+description: |
+   Wideband, microwave upconverter optimized for point to point microwave
+   radio designs operating in the 24 GHz to 44 GHz frequency range.
+
+   https://www.analog.com/en/products/admv1013.html
+
+properties:
+  compatible:
+    enum:
+      - adi,admv1013
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 1000000
+
+  clocks:
+    description:
+      Definition of the external clock.
+    minItems: 1
+
+  clock-names:
+    items:
+      - const: lo_in
+
+  vcm-supply:
+    description:
+      Analog voltage regulator.
+
+  adi,detector-enable:
+    description:
+      Enable the Envelope Detector available at output pins VENV_P and
+      VENV_N. Disable to reduce power consumption.
+    type: boolean
+
+  adi,input-mode:
+    description:
+      Select the input mode.
+      iq - in-phase quadrature (I/Q) input
+      if - complex intermediate frequency (IF) input
+    enum: [iq, if]
+
+  adi,quad-se-mode:
+    description:
+      Switch the LO path from differential to single-ended operation.
+      se-neg - Single-Ended Mode, Negative Side Disabled.
+      se-pos - Single-Ended Mode, Positive Side Disabled.
+      diff - Differential Mode.
+    enum: [se-neg, se-pos, diff]
+
+  '#clock-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - vcm-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      admv1013@0{
+        compatible = "adi,admv1013";
+        reg = <0>;
+        spi-max-frequency = <1000000>;
+        clocks = <&admv1013_lo>;
+        clock-names = "lo_in";
+        vcm-supply = <&vcm>;
+        adi,quad-se-mode = "diff";
+        adi,detector-enable;
+      };
+    };
+...
diff --git a/dts/Bindings/iio/gyroscope/invensense,mpu3050.yaml b/dts/Bindings/iio/gyroscope/invensense,mpu3050.yaml
index 7e2accc3d5..d1a6103fc3 100644
--- a/dts/Bindings/iio/gyroscope/invensense,mpu3050.yaml
+++ b/dts/Bindings/iio/gyroscope/invensense,mpu3050.yaml
@@ -61,7 +61,7 @@ examples:
                 #size-cells = <0>;
 
                 magnetometer@c {
-                    compatible = "ak,ak8975";
+                    compatible = "asahi-kasei,ak8975";
                     reg = <0x0c>;
                 };
             };
diff --git a/dts/Bindings/iio/imu/invensense,mpu6050.yaml b/dts/Bindings/iio/imu/invensense,mpu6050.yaml
index edbc2921aa..d69595a524 100644
--- a/dts/Bindings/iio/imu/invensense,mpu6050.yaml
+++ b/dts/Bindings/iio/imu/invensense,mpu6050.yaml
@@ -95,7 +95,7 @@ examples:
                 #address-cells = <1>;
                 #size-cells = <0>;
                 magnetometer@c {
-                    compatible = "ak,ak8975";
+                    compatible = "asahi-kasei,ak8975";
                     reg = <0x0c>;
                 };
             };
diff --git a/dts/Bindings/iio/imu/st,lsm6dsx.yaml b/dts/Bindings/iio/imu/st,lsm6dsx.yaml
index d9b3213318..0750f700a1 100644
--- a/dts/Bindings/iio/imu/st,lsm6dsx.yaml
+++ b/dts/Bindings/iio/imu/st,lsm6dsx.yaml
@@ -61,6 +61,13 @@ properties:
     type: boolean
     description: enable/disable internal i2c controller pullup resistors.
 
+  st,disable-sensor-hub:
+    type: boolean
+    description:
+      Enable/disable internal i2c controller slave autoprobing at bootstrap.
+      Disable sensor-hub is useful if i2c controller clock/data lines are
+      connected through a pull-up with other chip lines (e.g. SDO/SA0).
+
   drive-open-drain:
     type: boolean
     description:
diff --git a/dts/Bindings/iio/light/liteon,ltr501.yaml b/dts/Bindings/iio/light/liteon,ltr501.yaml
index db0407bc92..c8074f180a 100644
--- a/dts/Bindings/iio/light/liteon,ltr501.yaml
+++ b/dts/Bindings/iio/light/liteon,ltr501.yaml
@@ -9,6 +9,9 @@ title: LiteON LTR501 I2C Proximity and Light sensor
 maintainers:
   - Nikita Travkin <nikita@trvn.ru>
 
+allOf:
+  - $ref: ../common.yaml#
+
 properties:
   compatible:
     enum:
@@ -25,6 +28,8 @@ properties:
   interrupts:
     maxItems: 1
 
+  proximity-near-level: true
+
 additionalProperties: false
 
 required:
@@ -42,6 +47,8 @@ examples:
         light-sensor@23 {
             compatible = "liteon,ltr559";
             reg = <0x23>;
+            proximity-near-level = <75>;
+
             vdd-supply = <&pm8916_l17>;
             vddio-supply = <&pm8916_l6>;
 
diff --git a/dts/Bindings/iio/magnetometer/yamaha,yas530.yaml b/dts/Bindings/iio/magnetometer/yamaha,yas530.yaml
index 4b0ef1ef54..9438fffaf0 100644
--- a/dts/Bindings/iio/magnetometer/yamaha,yas530.yaml
+++ b/dts/Bindings/iio/magnetometer/yamaha,yas530.yaml
@@ -96,7 +96,7 @@ examples:
           vdd-supply = <&ldo1_reg>;
           iovdd-supply = <&ldo2_reg>;
           reset-gpios = <&gpio6 12 GPIO_ACTIVE_LOW>;
-          interrupts = <&gpio6 13 IRQ_TYPE_EDGE_RISING>;
+          interrupts = <13 IRQ_TYPE_EDGE_RISING>;
         };
     };
 
diff --git a/dts/Bindings/iio/proximity/google,cros-ec-mkbp-proximity.yaml b/dts/Bindings/iio/proximity/google,cros-ec-mkbp-proximity.yaml
index 099b4be927..00e3b59641 100644
--- a/dts/Bindings/iio/proximity/google,cros-ec-mkbp-proximity.yaml
+++ b/dts/Bindings/iio/proximity/google,cros-ec-mkbp-proximity.yaml
@@ -10,7 +10,6 @@ title: ChromeOS EC MKBP Proximity Sensor
 maintainers:
   - Stephen Boyd <swboyd@chromium.org>
   - Benson Leung <bleung@chromium.org>
-  - Enric Balletbo i Serra <enric.balletbo@collabora.com>
 
 description: |
   Google's ChromeOS EC sometimes has the ability to detect user proximity.
diff --git a/dts/Bindings/iio/temperature/adi,ltc2983.yaml b/dts/Bindings/iio/temperature/adi,ltc2983.yaml
index 0f79d9a01c..722781aa46 100644
--- a/dts/Bindings/iio/temperature/adi,ltc2983.yaml
+++ b/dts/Bindings/iio/temperature/adi,ltc2983.yaml
@@ -448,17 +448,17 @@ examples:
                         reg = <20>;
                         adi,sensor-type = <9>; //custom thermocouple
                         adi,single-ended;
-                        adi,custom-thermocouple = /bits/ 64
-                                 <(-50220000) 0>,
-                                 <(-30200000) 99100000>,
-                                 <(-5300000) 135400000>,
-                                 <0 273150000>,
-                                 <40200000 361200000>,
-                                 <55300000 522100000>,
-                                 <88300000 720300000>,
-                                 <132200000 811200000>,
-                                 <188700000 922500000>,
-                                 <460400000 1000000000>; //10 pairs
+                        adi,custom-thermocouple =
+                                 /bits/ 64 <(-50220000) 0>,
+                                 /bits/ 64 <(-30200000) 99100000>,
+                                 /bits/ 64 <(-5300000) 135400000>,
+                                 /bits/ 64 <0 273150000>,
+                                 /bits/ 64 <40200000 361200000>,
+                                 /bits/ 64 <55300000 522100000>,
+                                 /bits/ 64 <88300000 720300000>,
+                                 /bits/ 64 <132200000 811200000>,
+                                 /bits/ 64 <188700000 922500000>,
+                                 /bits/ 64 <460400000 1000000000>; //10 pairs
                };
 
         };
diff --git a/dts/Bindings/input/google,cros-ec-keyb.yaml b/dts/Bindings/input/google,cros-ec-keyb.yaml
index 5377b232fa..e8f137abb0 100644
--- a/dts/Bindings/input/google,cros-ec-keyb.yaml
+++ b/dts/Bindings/input/google,cros-ec-keyb.yaml
@@ -10,7 +10,6 @@ title: ChromeOS EC Keyboard
 maintainers:
   - Simon Glass <sjg@chromium.org>
   - Benson Leung <bleung@chromium.org>
-  - Enric Balletbo i Serra <enric.balletbo@collabora.com>
 
 description: |
   Google's ChromeOS EC Keyboard is a simple matrix keyboard
diff --git a/dts/Bindings/input/gpio-keys.yaml b/dts/Bindings/input/gpio-keys.yaml
index dbe7ecc19c..7fe1966ea2 100644
--- a/dts/Bindings/input/gpio-keys.yaml
+++ b/dts/Bindings/input/gpio-keys.yaml
@@ -88,12 +88,6 @@ patternProperties:
             which can be disabled to suppress events from the button.
           type: boolean
 
-        pinctrl-0:
-          maxItems: 1
-
-        pinctrl-names:
-          maxItems: 1
-
       required:
         - linux,code
 
diff --git a/dts/Bindings/input/hid-over-i2c.txt b/dts/Bindings/input/hid-over-i2c.txt
index c76bafaf98..34c43d3bdd 100644
--- a/dts/Bindings/input/hid-over-i2c.txt
+++ b/dts/Bindings/input/hid-over-i2c.txt
@@ -32,6 +32,8 @@ device-specific compatible properties, which should be used in addition to the
 - vdd-supply: phandle of the regulator that provides the supply voltage.
 - post-power-on-delay-ms: time required by the device after enabling its regulators
   or powering it on, before it is ready for communication.
+- touchscreen-inverted-x: See touchscreen.txt
+- touchscreen-inverted-y: See touchscreen.txt
 
 Example:
 
diff --git a/dts/Bindings/input/pwm-vibrator.txt b/dts/Bindings/input/pwm-vibrator.txt
deleted file mode 100644
index 88c775a3fe..0000000000
--- a/dts/Bindings/input/pwm-vibrator.txt
+++ /dev/null
@@ -1,66 +0,0 @@
-* PWM vibrator device tree bindings
-
-Registers a PWM device as vibrator. It is expected, that the vibrator's
-strength increases based on the duty cycle of the enable PWM channel
-(100% duty cycle meaning strongest vibration, 0% meaning no vibration).
-
-The binding supports an optional direction PWM channel, that can be
-driven at fixed duty cycle. If available this is can be used to increase
-the vibration effect of some devices.
-
-Required properties:
-- compatible: should contain "pwm-vibrator"
-- pwm-names: Should contain "enable" and optionally "direction"
-- pwms: Should contain a PWM handle for each entry in pwm-names
-
-Optional properties:
-- vcc-supply: Phandle for the regulator supplying power
-- direction-duty-cycle-ns: Duty cycle of the direction PWM channel in
-                           nanoseconds, defaults to 50% of the channel's
-			   period.
-
-Example from Motorola Droid 4:
-
-&omap4_pmx_core {
-	vibrator_direction_pin: pinmux_vibrator_direction_pin {
-		pinctrl-single,pins = <
-		OMAP4_IOPAD(0x1ce, PIN_OUTPUT | MUX_MODE1) /* dmtimer8_pwm_evt (gpio_27) */
-		>;
-	};
-
-	vibrator_enable_pin: pinmux_vibrator_enable_pin {
-		pinctrl-single,pins = <
-		OMAP4_IOPAD(0X1d0, PIN_OUTPUT | MUX_MODE1) /* dmtimer9_pwm_evt (gpio_28) */
-		>;
-	};
-};
-
-/ {
-	pwm8: dmtimer-pwm {
-		pinctrl-names = "default";
-		pinctrl-0 = <&vibrator_direction_pin>;
-
-		compatible = "ti,omap-dmtimer-pwm";
-		#pwm-cells = <3>;
-		ti,timers = <&timer8>;
-		ti,clock-source = <0x01>;
-	};
-
-	pwm9: dmtimer-pwm {
-		pinctrl-names = "default";
-		pinctrl-0 = <&vibrator_enable_pin>;
-
-		compatible = "ti,omap-dmtimer-pwm";
-		#pwm-cells = <3>;
-		ti,timers = <&timer9>;
-		ti,clock-source = <0x01>;
-	};
-
-	vibrator {
-		compatible = "pwm-vibrator";
-		pwms = <&pwm9 0 1000000000 0>,
-                       <&pwm8 0 1000000000 0>;
-		pwm-names = "enable", "direction";
-		direction-duty-cycle-ns = <1000000000>;
-	};
-};
diff --git a/dts/Bindings/input/pwm-vibrator.yaml b/dts/Bindings/input/pwm-vibrator.yaml
new file mode 100644
index 0000000000..a70a636ee1
--- /dev/null
+++ b/dts/Bindings/input/pwm-vibrator.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/input/pwm-vibrator.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: PWM vibrator
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+description: >
+  Registers a PWM device as vibrator. It is expected, that the vibrator's
+  strength increases based on the duty cycle of the enable PWM channel
+  (100% duty cycle meaning strongest vibration, 0% meaning no vibration).
+
+  The binding supports an optional direction PWM channel, that can be
+  driven at fixed duty cycle. If available this is can be used to increase
+  the vibration effect of some devices.
+
+properties:
+  compatible:
+    const: pwm-vibrator
+
+  pwm-names:
+    items:
+      - const: enable
+      - const: direction
+    minItems: 1
+
+  pwms:
+    minItems: 1
+    maxItems: 2
+
+  vcc-supply: true
+
+  direction-duty-cycle-ns:
+    description: >
+      Duty cycle of the direction PWM channel in nanoseconds,
+      defaults to 50% of the channel's period.
+
+required:
+  - compatible
+  - pwm-names
+  - pwms
+
+additionalProperties: false
+
+examples:
+  - |
+    vibrator {
+        compatible = "pwm-vibrator";
+        pwms = <&pwm9 0 1000000000 0>,
+               <&pwm8 0 1000000000 0>;
+        pwm-names = "enable", "direction";
+        direction-duty-cycle-ns = <1000000000>;
+    };
diff --git a/dts/Bindings/input/touchscreen/zinitix,bt400.yaml b/dts/Bindings/input/touchscreen/zinitix,bt400.yaml
new file mode 100644
index 0000000000..b4e5ba7c0b
--- /dev/null
+++ b/dts/Bindings/input/touchscreen/zinitix,bt400.yaml
@@ -0,0 +1,115 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/zinitix,bt400.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Zinitix BT4xx and BT5xx series touchscreen controller bindings
+
+description: The Zinitix BT4xx and BT5xx series of touchscreen controllers
+  are Korea-produced touchscreens with embedded microcontrollers. The
+  BT4xx series was produced 2010-2013 and the BT5xx series 2013-2014.
+
+maintainers:
+  - Michael Srba <Michael.Srba@seznam.cz>
+  - Linus Walleij <linus.walleij@linaro.org>
+
+allOf:
+  - $ref: touchscreen.yaml#
+
+properties:
+  $nodename:
+    pattern: "^touchscreen(@.*)?$"
+
+  compatible:
+    enum:
+      - zinitix,bt402
+      - zinitix,bt403
+      - zinitix,bt404
+      - zinitix,bt412
+      - zinitix,bt413
+      - zinitix,bt431
+      - zinitix,bt432
+      - zinitix,bt531
+      - zinitix,bt532
+      - zinitix,bt538
+      - zinitix,bt541
+      - zinitix,bt548
+      - zinitix,bt554
+      - zinitix,at100
+
+  reg:
+    description: I2C address on the I2C bus
+
+  clock-frequency:
+    description: I2C client clock frequency, defined for host when using
+      the device on the I2C bus
+    minimum: 0
+    maximum: 400000
+
+  interrupts:
+    description: Interrupt to host
+    maxItems: 1
+
+  vcca-supply:
+    description: Analog power supply regulator on the VCCA pin
+
+  vdd-supply:
+    description: Digital power supply regulator on the VDD pin.
+      In older device trees this can be the accidental name for the analog
+      supply on the VCCA pin, and in that case the deprecated vddo-supply is
+      used for the digital power supply.
+
+  vddo-supply:
+    description: Deprecated name for the digital power supply, use vdd-supply
+      as this reflects the real name of the pin. If this supply is present,
+      the vdd-supply represents VCCA instead of VDD. Implementers should first
+      check for this property, and if it is present assume that the vdd-supply
+      represents the analog supply.
+    deprecated: true
+
+  reset-gpios:
+    description: Reset line for the touchscreen, should be tagged
+      as GPIO_ACTIVE_LOW
+
+  zinitix,mode:
+    description: Mode of reporting touch points. Some modes may not work
+      with a particular ts firmware for unknown reasons. Available modes are
+      1 and 2. Mode 2 is the default and preferred.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2]
+
+  touchscreen-size-x: true
+  touchscreen-size-y: true
+  touchscreen-fuzz-x: true
+  touchscreen-fuzz-y: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - touchscreen-size-x
+  - touchscreen-size-y
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      touchscreen@20 {
+        compatible = "zinitix,bt541";
+        reg = <0x20>;
+        interrupt-parent = <&gpio>;
+        interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+        vcca-supply = <&reg_vcca_tsp>;
+        vdd-supply = <&reg_vdd_tsp>;
+        touchscreen-size-x = <540>;
+        touchscreen-size-y = <960>;
+        zinitix,mode = <2>;
+      };
+    };
diff --git a/dts/Bindings/input/touchscreen/zinitix.txt b/dts/Bindings/input/touchscreen/zinitix.txt
deleted file mode 100644
index 446efb9f5f..0000000000
--- a/dts/Bindings/input/touchscreen/zinitix.txt
+++ /dev/null
@@ -1,40 +0,0 @@
-Device tree bindings for Zinitx BT541 touchscreen controller
-
-Required properties:
-
- - compatible		: Should be "zinitix,bt541"
- - reg			: I2C address of the chip. Should be 0x20
- - interrupts		: Interrupt to which the chip is connected
-
-Optional properties:
-
- - vdd-supply		: Analog power supply regulator on VCCA pin
- - vddo-supply		: Digital power supply regulator on VDD pin
- - zinitix,mode		: Mode of reporting touch points. Some modes may not work
-			  with a particular ts firmware for unknown reasons. Available
-			  modes are 1 and 2. Mode 2 is the default and preferred.
-
-The touchscreen-* properties are documented in touchscreen.txt in this
-directory.
-
-Example:
-
-	i2c@00000000 {
-		/* ... */
-
-		bt541@20 {
-			compatible = "zinitix,bt541";
-			reg = <0x20>;
-			interrupt-parent = <&msmgpio>;
-			interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&tsp_default>;
-			vdd-supply = <&reg_vdd_tsp>;
-			vddo-supply = <&pm8916_l6>;
-			touchscreen-size-x = <540>;
-			touchscreen-size-y = <960>;
-			zinitix,mode = <2>;
-		};
-
-		/* ... */
-	};
diff --git a/dts/Bindings/interconnect/qcom,osm-l3.yaml b/dts/Bindings/interconnect/qcom,osm-l3.yaml
index e701524ee8..116e434d0d 100644
--- a/dts/Bindings/interconnect/qcom,osm-l3.yaml
+++ b/dts/Bindings/interconnect/qcom,osm-l3.yaml
@@ -18,6 +18,7 @@ properties:
   compatible:
     enum:
       - qcom,sc7180-osm-l3
+      - qcom,sc7280-epss-l3
       - qcom,sc8180x-osm-l3
       - qcom,sdm845-osm-l3
       - qcom,sm8150-osm-l3
diff --git a/dts/Bindings/interconnect/qcom,qcm2290.yaml b/dts/Bindings/interconnect/qcom,qcm2290.yaml
new file mode 100644
index 0000000000..f65a2fe846
--- /dev/null
+++ b/dts/Bindings/interconnect/qcom,qcm2290.yaml
@@ -0,0 +1,137 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,qcm2290.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm QCM2290 Network-On-Chip interconnect
+
+maintainers:
+  - Shawn Guo <shawn.guo@linaro.org>
+
+description: |
+  The Qualcomm QCM2290 interconnect providers support adjusting the
+  bandwidth requirements between the various NoC fabrics.
+
+properties:
+  reg:
+    maxItems: 1
+
+  compatible:
+    enum:
+      - qcom,qcm2290-bimc
+      - qcom,qcm2290-cnoc
+      - qcom,qcm2290-snoc
+
+  '#interconnect-cells':
+    const: 1
+
+  clock-names:
+    items:
+      - const: bus
+      - const: bus_a
+
+  clocks:
+    items:
+      - description: Bus Clock
+      - description: Bus A Clock
+
+# Child node's properties
+patternProperties:
+  '^interconnect-[a-z0-9]+$':
+    type: object
+    description:
+      The interconnect providers do not have a separate QoS register space,
+      but share parent's space.
+
+    properties:
+      compatible:
+        enum:
+          - qcom,qcm2290-qup-virt
+          - qcom,qcm2290-mmrt-virt
+          - qcom,qcm2290-mmnrt-virt
+
+      '#interconnect-cells':
+        const: 1
+
+      clock-names:
+        items:
+          - const: bus
+          - const: bus_a
+
+      clocks:
+        items:
+          - description: Bus Clock
+          - description: Bus A Clock
+
+    required:
+      - compatible
+      - '#interconnect-cells'
+      - clock-names
+      - clocks
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - '#interconnect-cells'
+  - clock-names
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+
+    snoc: interconnect@1880000 {
+        compatible = "qcom,qcm2290-snoc";
+        reg = <0x01880000 0x60200>;
+        #interconnect-cells = <1>;
+        clock-names = "bus", "bus_a";
+        clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
+                 <&rpmcc RPM_SMD_SNOC_A_CLK>;
+
+        qup_virt: interconnect-qup {
+            compatible = "qcom,qcm2290-qup-virt";
+            #interconnect-cells = <1>;
+            clock-names = "bus", "bus_a";
+            clocks = <&rpmcc RPM_SMD_QUP_CLK>,
+                     <&rpmcc RPM_SMD_QUP_A_CLK>;
+        };
+
+        mmnrt_virt: interconnect-mmnrt {
+            compatible = "qcom,qcm2290-mmnrt-virt";
+            #interconnect-cells = <1>;
+            clock-names = "bus", "bus_a";
+            clocks = <&rpmcc RPM_SMD_MMNRT_CLK>,
+                     <&rpmcc RPM_SMD_MMNRT_A_CLK>;
+        };
+
+        mmrt_virt: interconnect-mmrt {
+            compatible = "qcom,qcm2290-mmrt-virt";
+            #interconnect-cells = <1>;
+            clock-names = "bus", "bus_a";
+            clocks = <&rpmcc RPM_SMD_MMRT_CLK>,
+                     <&rpmcc RPM_SMD_MMRT_A_CLK>;
+        };
+    };
+
+    cnoc: interconnect@1900000 {
+        compatible = "qcom,qcm2290-cnoc";
+        reg = <0x01900000 0x8200>;
+        #interconnect-cells = <1>;
+        clock-names = "bus", "bus_a";
+        clocks = <&rpmcc RPM_SMD_CNOC_CLK>,
+                 <&rpmcc RPM_SMD_CNOC_A_CLK>;
+    };
+
+    bimc: interconnect@4480000 {
+        compatible = "qcom,qcm2290-bimc";
+        reg = <0x04480000 0x80000>;
+        #interconnect-cells = <1>;
+        clock-names = "bus", "bus_a";
+        clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
+                 <&rpmcc RPM_SMD_BIMC_A_CLK>;
+    };
diff --git a/dts/Bindings/interconnect/qcom,rpm.yaml b/dts/Bindings/interconnect/qcom,rpm.yaml
index 983d71fb53..e4c3c28181 100644
--- a/dts/Bindings/interconnect/qcom,rpm.yaml
+++ b/dts/Bindings/interconnect/qcom,rpm.yaml
@@ -27,22 +27,37 @@ properties:
       - qcom,msm8939-pcnoc
       - qcom,msm8939-snoc
       - qcom,msm8939-snoc-mm
+      - qcom,msm8996-a0noc
+      - qcom,msm8996-a1noc
+      - qcom,msm8996-a2noc
+      - qcom,msm8996-bimc
+      - qcom,msm8996-cnoc
+      - qcom,msm8996-mnoc
+      - qcom,msm8996-pnoc
+      - qcom,msm8996-snoc
       - qcom,qcs404-bimc
       - qcom,qcs404-pcnoc
       - qcom,qcs404-snoc
+      - qcom,sdm660-a2noc
+      - qcom,sdm660-bimc
+      - qcom,sdm660-cnoc
+      - qcom,sdm660-gnoc
+      - qcom,sdm660-mnoc
+      - qcom,sdm660-snoc
 
   '#interconnect-cells':
     const: 1
 
+  clocks:
+    minItems: 2
+    maxItems: 7
+
   clock-names:
-    items:
-      - const: bus
-      - const: bus_a
+    minItems: 2
+    maxItems: 7
 
-  clocks:
-    items:
-      - description: Bus Clock
-      - description: Bus A Clock
+  power-domains:
+    maxItems: 1
 
 required:
   - compatible
@@ -53,6 +68,120 @@ required:
 
 additionalProperties: false
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8916-bimc
+              - qcom,msm8916-pcnoc
+              - qcom,msm8916-snoc
+              - qcom,msm8939-bimc
+              - qcom,msm8939-pcnoc
+              - qcom,msm8939-snoc
+              - qcom,msm8939-snoc-mm
+              - qcom,msm8996-a1noc
+              - qcom,msm8996-a2noc
+              - qcom,msm8996-bimc
+              - qcom,msm8996-cnoc
+              - qcom,msm8996-pnoc
+              - qcom,msm8996-snoc
+              - qcom,qcs404-bimc
+              - qcom,qcs404-pcnoc
+              - qcom,qcs404-snoc
+              - qcom,sdm660-bimc
+              - qcom,sdm660-cnoc
+              - qcom,sdm660-gnoc
+              - qcom,sdm660-snoc
+
+      then:
+        properties:
+          clock-names:
+            items:
+              - const: bus
+              - const: bus_a
+
+          clocks:
+            items:
+              - description: Bus Clock
+              - description: Bus A Clock
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8996-mnoc
+              - qcom,sdm660-mnoc
+
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: bus
+            - const: bus_a
+            - const: iface
+
+        clocks:
+          items:
+            - description: Bus Clock.
+            - description: Bus A Clock.
+            - description: CPU-NoC High-performance Bus Clock.
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8996-a0noc
+
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: aggre0_snoc_axi
+            - const: aggre0_cnoc_ahb
+            - const: aggre0_noc_mpu_cfg
+
+        clocks:
+          items:
+            - description: Aggregate0 System NoC AXI Clock.
+            - description: Aggregate0 Config NoC AHB Clock.
+            - description: Aggregate0 NoC MPU Clock.
+
+      required:
+        - power-domains
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sdm660-a2noc
+
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: bus
+            - const: bus_a
+            - const: ipa
+            - const: ufs_axi
+            - const: aggre2_ufs_axi
+            - const: aggre2_usb3_axi
+            - const: cfg_noc_usb2_axi
+
+        clocks:
+          items:
+            - description: Bus Clock.
+            - description: Bus A Clock.
+            - description: IPA Clock.
+            - description: UFS AXI Clock.
+            - description: Aggregate2 UFS AXI Clock.
+            - description: Aggregate2 USB3 AXI Clock.
+            - description: Config NoC USB2 AXI Clock.
+
 examples:
   - |
       #include <dt-bindings/clock/qcom,rpmcc.h>
diff --git a/dts/Bindings/interconnect/qcom,rpmh.yaml b/dts/Bindings/interconnect/qcom,rpmh.yaml
index 3fd1a13416..cbb24f9bb6 100644
--- a/dts/Bindings/interconnect/qcom,rpmh.yaml
+++ b/dts/Bindings/interconnect/qcom,rpmh.yaml
@@ -104,6 +104,17 @@ properties:
       - qcom,sm8350-mmss-noc
       - qcom,sm8350-compute-noc
       - qcom,sm8350-system-noc
+      - qcom,sm8450-aggre1-noc
+      - qcom,sm8450-aggre2-noc
+      - qcom,sm8450-clk-virt
+      - qcom,sm8450-config-noc
+      - qcom,sm8450-gem-noc
+      - qcom,sm8450-lpass-ag-noc
+      - qcom,sm8450-mc-virt
+      - qcom,sm8450-mmss-noc
+      - qcom,sm8450-nsp-noc
+      - qcom,sm8450-pcie-anoc
+      - qcom,sm8450-system-noc
 
   '#interconnect-cells':
     enum: [ 1, 2 ]
diff --git a/dts/Bindings/interconnect/qcom,sdm660.yaml b/dts/Bindings/interconnect/qcom,sdm660.yaml
deleted file mode 100644
index bcd41e491f..0000000000
--- a/dts/Bindings/interconnect/qcom,sdm660.yaml
+++ /dev/null
@@ -1,185 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/interconnect/qcom,sdm660.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Qualcomm SDM660 Network-On-Chip interconnect
-
-maintainers:
-  - AngeloGioacchino Del Regno <kholk11@gmail.com>
-
-description: |
-  The Qualcomm SDM660 interconnect providers support adjusting the
-  bandwidth requirements between the various NoC fabrics.
-
-properties:
-  reg:
-    maxItems: 1
-
-  compatible:
-    enum:
-      - qcom,sdm660-a2noc
-      - qcom,sdm660-bimc
-      - qcom,sdm660-cnoc
-      - qcom,sdm660-gnoc
-      - qcom,sdm660-mnoc
-      - qcom,sdm660-snoc
-
-  '#interconnect-cells':
-    const: 1
-
-  clocks:
-    minItems: 1
-    maxItems: 7
-
-  clock-names:
-    minItems: 1
-    maxItems: 7
-
-required:
-  - compatible
-  - reg
-  - '#interconnect-cells'
-  - clock-names
-  - clocks
-
-additionalProperties: false
-
-allOf:
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,sdm660-mnoc
-    then:
-      properties:
-        clocks:
-          items:
-            - description: Bus Clock.
-            - description: Bus A Clock.
-            - description: CPU-NoC High-performance Bus Clock.
-        clock-names:
-          items:
-            - const: bus
-            - const: bus_a
-            - const: iface
-
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,sdm660-a2noc
-    then:
-      properties:
-        clocks:
-          items:
-            - description: Bus Clock.
-            - description: Bus A Clock.
-            - description: IPA Clock.
-            - description: UFS AXI Clock.
-            - description: Aggregate2 UFS AXI Clock.
-            - description: Aggregate2 USB3 AXI Clock.
-            - description: Config NoC USB2 AXI Clock.
-        clock-names:
-          items:
-            - const: bus
-            - const: bus_a
-            - const: ipa
-            - const: ufs_axi
-            - const: aggre2_ufs_axi
-            - const: aggre2_usb3_axi
-            - const: cfg_noc_usb2_axi
-
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,sdm660-bimc
-              - qcom,sdm660-cnoc
-              - qcom,sdm660-gnoc
-              - qcom,sdm660-snoc
-    then:
-      properties:
-        clocks:
-          items:
-            - description: Bus Clock.
-            - description: Bus A Clock.
-        clock-names:
-          items:
-            - const: bus
-            - const: bus_a
-
-examples:
-  - |
-      #include <dt-bindings/clock/qcom,rpmcc.h>
-      #include <dt-bindings/clock/qcom,mmcc-sdm660.h>
-      #include <dt-bindings/clock/qcom,gcc-sdm660.h>
-
-      bimc: interconnect@1008000 {
-              compatible = "qcom,sdm660-bimc";
-              reg = <0x01008000 0x78000>;
-              #interconnect-cells = <1>;
-              clock-names = "bus", "bus_a";
-              clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
-                       <&rpmcc RPM_SMD_BIMC_A_CLK>;
-      };
-
-      cnoc: interconnect@1500000 {
-              compatible = "qcom,sdm660-cnoc";
-              reg = <0x01500000 0x10000>;
-              #interconnect-cells = <1>;
-              clock-names = "bus", "bus_a";
-              clocks = <&rpmcc RPM_SMD_CNOC_CLK>,
-                       <&rpmcc RPM_SMD_CNOC_A_CLK>;
-      };
-
-      snoc: interconnect@1626000 {
-              compatible = "qcom,sdm660-snoc";
-              reg = <0x01626000 0x7090>;
-              #interconnect-cells = <1>;
-              clock-names = "bus", "bus_a";
-              clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
-                       <&rpmcc RPM_SMD_SNOC_A_CLK>;
-      };
-
-      a2noc: interconnect@1704000 {
-              compatible = "qcom,sdm660-a2noc";
-              reg = <0x01704000 0xc100>;
-              #interconnect-cells = <1>;
-              clock-names = "bus",
-                            "bus_a",
-                            "ipa",
-                            "ufs_axi",
-                            "aggre2_ufs_axi",
-                            "aggre2_usb3_axi",
-                            "cfg_noc_usb2_axi";
-              clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>,
-                       <&rpmcc RPM_SMD_AGGR2_NOC_A_CLK>,
-                       <&rpmcc RPM_SMD_IPA_CLK>,
-                       <&gcc GCC_UFS_AXI_CLK>,
-                       <&gcc GCC_AGGRE2_UFS_AXI_CLK>,
-                       <&gcc GCC_AGGRE2_USB3_AXI_CLK>,
-                       <&gcc GCC_CFG_NOC_USB2_AXI_CLK>;
-      };
-
-      mnoc: interconnect@1745000 {
-              compatible = "qcom,sdm660-mnoc";
-              reg = <0x01745000 0xa010>;
-              #interconnect-cells = <1>;
-              clock-names = "bus", "bus_a", "iface";
-              clocks = <&rpmcc RPM_SMD_MMSSNOC_AXI_CLK>,
-                       <&rpmcc RPM_SMD_MMSSNOC_AXI_CLK_A>,
-                       <&mmcc AHB_CLK_SRC>;
-      };
-
-      gnoc: interconnect@17900000 {
-              compatible = "qcom,sdm660-gnoc";
-              reg = <0x17900000 0xe000>;
-              #interconnect-cells = <1>;
-              clock-names = "bus", "bus_a";
-              clocks = <&xo_board>, <&xo_board>;
-      };
diff --git a/dts/Bindings/interrupt-controller/apple,aic.yaml b/dts/Bindings/interrupt-controller/apple,aic.yaml
index cf6c091a07..9735902470 100644
--- a/dts/Bindings/interrupt-controller/apple,aic.yaml
+++ b/dts/Bindings/interrupt-controller/apple,aic.yaml
@@ -65,6 +65,9 @@ properties:
       Specifies base physical address and size of the AIC registers.
     maxItems: 1
 
+  power-domains:
+    maxItems: 1
+
 required:
   - compatible
   - '#interrupt-cells'
diff --git a/dts/Bindings/interrupt-controller/arm,gic-v3.yaml b/dts/Bindings/interrupt-controller/arm,gic-v3.yaml
index c84f9fe7f2..cfb3ec27bd 100644
--- a/dts/Bindings/interrupt-controller/arm,gic-v3.yaml
+++ b/dts/Bindings/interrupt-controller/arm,gic-v3.yaml
@@ -239,6 +239,7 @@ examples:
       };
     };
 
+  - |
     interrupt-controller@2c010000 {
       compatible = "arm,gic-v3";
       #interrupt-cells = <4>;
@@ -254,7 +255,7 @@ examples:
             <0x2c040000 0x2000>,  // GICC
             <0x2c060000 0x2000>,  // GICH
             <0x2c080000 0x2000>;  // GICV
-      interrupts = <1 9 4>;
+      interrupts = <1 9 4 0>;
 
       msi-controller@2c200000 {
         compatible = "arm,gic-v3-its";
diff --git a/dts/Bindings/interrupt-controller/brcm,bcm3380-l2-intc.txt b/dts/Bindings/interrupt-controller/brcm,bcm3380-l2-intc.txt
deleted file mode 100644
index 37aea40d54..0000000000
--- a/dts/Bindings/interrupt-controller/brcm,bcm3380-l2-intc.txt
+++ /dev/null
@@ -1,39 +0,0 @@
-Broadcom BCM3380-style Level 1 / Level 2 interrupt controller
-
-This interrupt controller shows up in various forms on many BCM338x/BCM63xx
-chipsets.  It has the following properties:
-
-- outputs a single interrupt signal to its interrupt controller parent
-
-- contains one or more enable/status word pairs, which often appear at
-  different offsets in different blocks
-
-- no atomic set/clear operations
-
-Required properties:
-
-- compatible: should be "brcm,bcm3380-l2-intc"
-- reg: specifies one or more enable/status pairs, in the following format:
-  <enable_reg 0x4 status_reg 0x4>...
-- interrupt-controller: identifies the node as an interrupt controller
-- #interrupt-cells: specifies the number of cells needed to encode an interrupt
-  source, should be 1.
-- interrupts: specifies the interrupt line in the interrupt-parent controller
-  node, valid values depend on the type of parent interrupt controller
-
-Optional properties:
-
-- brcm,irq-can-wake: if present, this means the L2 controller can be used as a
-  wakeup source for system suspend/resume.
-
-Example:
-
-irq0_intc: interrupt-controller@10000020 {
-	compatible = "brcm,bcm3380-l2-intc";
-	reg = <0x10000024 0x4 0x1000002c 0x4>,
-	      <0x10000020 0x4 0x10000028 0x4>;
-	interrupt-controller;
-	#interrupt-cells = <1>;
-	interrupt-parent = <&cpu_intc>;
-	interrupts = <2>;
-};
diff --git a/dts/Bindings/interrupt-controller/brcm,bcm7038-l1-intc.txt b/dts/Bindings/interrupt-controller/brcm,bcm7038-l1-intc.txt
deleted file mode 100644
index 5ddef1dc0c..0000000000
--- a/dts/Bindings/interrupt-controller/brcm,bcm7038-l1-intc.txt
+++ /dev/null
@@ -1,61 +0,0 @@
-Broadcom BCM7038-style Level 1 interrupt controller
-
-This block is a first level interrupt controller that is typically connected
-directly to one of the HW INT lines on each CPU.  Every BCM7xxx set-top chip
-since BCM7038 has contained this hardware.
-
-Key elements of the hardware design include:
-
-- 64, 96, 128, or 160 incoming level IRQ lines
-
-- Most onchip peripherals are wired directly to an L1 input
-
-- A separate instance of the register set for each CPU, allowing individual
-  peripheral IRQs to be routed to any CPU
-
-- Atomic mask/unmask operations
-
-- No polarity/level/edge settings
-
-- No FIFO or priority encoder logic; software is expected to read all
-  2-5 status words to determine which IRQs are pending
-
-Required properties:
-
-- compatible: should be "brcm,bcm7038-l1-intc"
-- reg: specifies the base physical address and size of the registers;
-  the number of supported IRQs is inferred from the size argument
-- interrupt-controller: identifies the node as an interrupt controller
-- #interrupt-cells: specifies the number of cells needed to encode an interrupt
-  source, should be 1.
-- interrupts: specifies the interrupt line(s) in the interrupt-parent controller
-  node; valid values depend on the type of parent interrupt controller
-
-Optional properties:
-
-- brcm,irq-can-wake: If present, this means the L1 controller can be used as a
-  wakeup source for system suspend/resume.
-
-Optional properties:
-
-- brcm,int-fwd-mask: if present, a bit mask to indicate which interrupts
-  have already been configured by the firmware and should be left unmanaged.
-  This should have one 32-bit word per status/set/clear/mask group.
-
-If multiple reg ranges and interrupt-parent entries are present on an SMP
-system, the driver will allow IRQ SMP affinity to be set up through the
-/proc/irq/ interface.  In the simplest possible configuration, only one
-reg range and one interrupt-parent is needed.
-
-Example:
-
-periph_intc: periph_intc@1041a400 {
-        compatible = "brcm,bcm7038-l1-intc";
-        reg = <0x1041a400 0x30 0x1041a600 0x30>;
-
-        interrupt-controller;
-        #interrupt-cells = <1>;
-
-        interrupt-parent = <&cpu_intc>;
-        interrupts = <2>, <3>;
-};
diff --git a/dts/Bindings/interrupt-controller/brcm,bcm7038-l1-intc.yaml b/dts/Bindings/interrupt-controller/brcm,bcm7038-l1-intc.yaml
new file mode 100644
index 0000000000..5ecb6faa70
--- /dev/null
+++ b/dts/Bindings/interrupt-controller/brcm,bcm7038-l1-intc.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/brcm,bcm7038-l1-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM7038-style Level 1 interrupt controller
+
+description: >
+  This block is a first level interrupt controller that is typically connected
+  directly to one of the HW INT lines on each CPU.  Every BCM7xxx set-top chip
+  since BCM7038 has contained this hardware.
+
+  Key elements of the hardware design include:
+
+   - 64, 96, 128, or 160 incoming level IRQ lines
+
+   - Most onchip peripherals are wired directly to an L1 input
+
+   - A separate instance of the register set for each CPU, allowing individual
+     peripheral IRQs to be routed to any CPU
+
+   - Atomic mask/unmask operations
+
+   - No polarity/level/edge settings
+
+   - No FIFO or priority encoder logic; software is expected to read all
+     2-5 status words to determine which IRQs are pending
+
+   If multiple reg ranges and interrupt-parent entries are present on an SMP
+   system, the driver will allow IRQ SMP affinity to be set up through the
+   /proc/irq/ interface.  In the simplest possible configuration, only one
+   reg range and one interrupt-parent is needed.
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+  compatible:
+    const: brcm,bcm7038-l1-intc
+
+  reg:
+    description: >
+      Specifies the base physical address and size of the registers
+      the number of supported IRQs is inferred from the size argument
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 1
+
+  interrupts:
+    description: >
+     Specifies the interrupt line(s) in the interrupt-parent controller node;
+     valid values depend on the type of parent interrupt controller
+
+  brcm,irq-can-wake:
+    type: boolean
+    description: >
+      If present, this means the L1 controller can be used as a
+      wakeup source for system suspend/resume.
+
+  brcm,int-fwd-mask:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description:
+      If present, a bit mask to indicate which interrupts have already been
+      configured by the firmware and should be left unmanaged. This should
+      have one 32-bit word per status/set/clear/mask group.
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - "#interrupt-cells"
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    periph_intc: interrupt-controller@1041a400 {
+      compatible = "brcm,bcm7038-l1-intc";
+      reg = <0x1041a400 0x30>, <0x1041a600 0x30>;
+      interrupt-controller;
+      #interrupt-cells = <1>;
+      interrupt-parent = <&cpu_intc>;
+      interrupts = <2>, <3>;
+    };
diff --git a/dts/Bindings/interrupt-controller/brcm,bcm7120-l2-intc.txt b/dts/Bindings/interrupt-controller/brcm,bcm7120-l2-intc.txt
deleted file mode 100644
index addd86b6ca..0000000000
--- a/dts/Bindings/interrupt-controller/brcm,bcm7120-l2-intc.txt
+++ /dev/null
@@ -1,88 +0,0 @@
-Broadcom BCM7120-style Level 2 interrupt controller
-
-This interrupt controller hardware is a second level interrupt controller that
-is hooked to a parent interrupt controller: e.g: ARM GIC for ARM-based
-platforms. It can be found on BCM7xxx products starting with BCM7120.
-
-Such an interrupt controller has the following hardware design:
-
-- outputs multiple interrupts signals towards its interrupt controller parent
-
-- controls how some of the interrupts will be flowing, whether they will
-  directly output an interrupt signal towards the interrupt controller parent,
-  or if they will output an interrupt signal at this 2nd level interrupt
-  controller, in particular for UARTs
-
-- has one 32-bit enable word and one 32-bit status word
-
-- no atomic set/clear operations
-
-- not all bits within the interrupt controller actually map to an interrupt
-
-The typical hardware layout for this controller is represented below:
-
-2nd level interrupt line		Outputs for the parent controller (e.g: ARM GIC)
-
-0 -----[ MUX ] ------------|==========> GIC interrupt 75
-          \-----------\
-                       |
-1 -----[ MUX ] --------)---|==========> GIC interrupt 76
-          \------------|
-                       |
-2 -----[ MUX ] --------)---|==========> GIC interrupt 77
-          \------------|
-                       |
-3 ---------------------|
-4 ---------------------|
-5 ---------------------|
-7 ---------------------|---|===========> GIC interrupt 66
-9 ---------------------|
-10 --------------------|
-11 --------------------/
-
-6 ------------------------\
-                           |===========> GIC interrupt 64
-8 ------------------------/
-
-12 ........................ X
-13 ........................ X 		(not connected)
-..
-31 ........................ X
-
-Required properties:
-
-- compatible: should be "brcm,bcm7120-l2-intc"
-- reg: specifies the base physical address and size of the registers
-- interrupt-controller: identifies the node as an interrupt controller
-- #interrupt-cells: specifies the number of cells needed to encode an interrupt
-  source, should be 1.
-- interrupts: specifies the interrupt line(s) in the interrupt-parent controller
-  node, valid values depend on the type of parent interrupt controller
-- brcm,int-map-mask: 32-bits bit mask describing how many and which interrupts
-  are wired to this 2nd level interrupt controller, and how they match their
-  respective interrupt parents. Should match exactly the number of interrupts
-  specified in the 'interrupts' property.
-
-Optional properties:
-
-- brcm,irq-can-wake: if present, this means the L2 controller can be used as a
-  wakeup source for system suspend/resume.
-
-- brcm,int-fwd-mask: if present, a bit mask to configure the interrupts which
-  have a mux gate, typically UARTs. Setting these bits will make their
-  respective interrupt outputs bypass this 2nd level interrupt controller
-  completely; it is completely transparent for the interrupt controller
-  parent. This should have one 32-bit word per enable/status pair.
-
-Example:
-
-irq0_intc: interrupt-controller@f0406800 {
-	compatible = "brcm,bcm7120-l2-intc";
-	interrupt-parent = <&intc>;
-	#interrupt-cells = <1>;
-	reg = <0xf0406800 0x8>;
-	interrupt-controller;
-	interrupts = <0x0 0x42 0x0>, <0x0 0x40 0x0>;
-	brcm,int-map-mask = <0xeb8>, <0x140>;
-	brcm,int-fwd-mask = <0x7>;
-};
diff --git a/dts/Bindings/interrupt-controller/brcm,bcm7120-l2-intc.yaml b/dts/Bindings/interrupt-controller/brcm,bcm7120-l2-intc.yaml
new file mode 100644
index 0000000000..46b2eb3c43
--- /dev/null
+++ b/dts/Bindings/interrupt-controller/brcm,bcm7120-l2-intc.yaml
@@ -0,0 +1,151 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/brcm,bcm7120-l2-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM7120-style Level 2 and Broadcom BCM3380 Level 1 / Level 2
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+description: >
+  This interrupt controller hardware is a second level interrupt controller that
+  is hooked to a parent interrupt controller: e.g: ARM GIC for ARM-based
+  platforms. It can be found on BCM7xxx products starting with BCM7120.
+
+  Such an interrupt controller has the following hardware design:
+
+  - outputs multiple interrupts signals towards its interrupt controller parent
+
+  - controls how some of the interrupts will be flowing, whether they will
+    directly output an interrupt signal towards the interrupt controller parent,
+    or if they will output an interrupt signal at this 2nd level interrupt
+    controller, in particular for UARTs
+
+  - has one 32-bit enable word and one 32-bit status word
+
+  - no atomic set/clear operations
+
+  - not all bits within the interrupt controller actually map to an interrupt
+
+  The typical hardware layout for this controller is represented below:
+
+  2nd level interrupt line		Outputs for the parent controller (e.g: ARM GIC)
+
+  0 -----[ MUX ] ------------|==========> GIC interrupt 75
+            \-----------\
+                         |
+  1 -----[ MUX ] --------)---|==========> GIC interrupt 76
+            \------------|
+                         |
+  2 -----[ MUX ] --------)---|==========> GIC interrupt 77
+            \------------|
+                         |
+  3 ---------------------|
+  4 ---------------------|
+  5 ---------------------|
+  7 ---------------------|---|===========> GIC interrupt 66
+  9 ---------------------|
+  10 --------------------|
+  11 --------------------/
+
+  6 ------------------------\
+                            |===========> GIC interrupt 64
+  8 ------------------------/
+
+  12 ........................ X
+  13 ........................ X           (not connected)
+  ..
+  31 ........................ X
+
+  The BCM3380 Level 1 / Level 2 interrrupt controller shows up in various forms
+  on many BCM338x/BCM63xx chipsets. It has the following properties:
+
+  - outputs a single interrupt signal to its interrupt controller parent
+
+  - contains one or more enable/status word pairs, which often appear at
+    different offsets in different blocks
+
+  - no atomic set/clear operations
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - brcm,bcm7120-l2-intc
+          - brcm,bcm3380-l2-intc
+
+  reg:
+    minItems: 1
+    maxItems: 4
+    description: >
+      Specifies the base physical address and size of the registers
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 32
+
+  brcm,int-map-mask:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: >
+      32-bits bit mask describing how many and which interrupts are wired to
+      this 2nd level interrupt controller, and how they match their respective
+      interrupt parents. Should match exactly the number of interrupts
+      specified in the 'interrupts' property.
+
+  brcm,irq-can-wake:
+    type: boolean
+    description: >
+      If present, this means the L2 controller can be used as a wakeup source
+      for system suspend/resume.
+
+  brcm,int-fwd-mask:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: >
+      if present, a bit mask to configure the interrupts which have a mux gate,
+      typically UARTs. Setting these bits will make their respective interrupt
+      outputs bypass this 2nd level interrupt controller completely; it is
+      completely transparent for the interrupt controller parent. This should
+      have one 32-bit word per enable/status pair.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - "#interrupt-cells"
+  - interrupts
+
+examples:
+  - |
+    irq0_intc: interrupt-controller@f0406800 {
+      compatible = "brcm,bcm7120-l2-intc";
+      interrupt-parent = <&intc>;
+      #interrupt-cells = <1>;
+      reg = <0xf0406800 0x8>;
+      interrupt-controller;
+      interrupts = <0x0 0x42 0x0>, <0x0 0x40 0x0>;
+      brcm,int-map-mask = <0xeb8>, <0x140>;
+      brcm,int-fwd-mask = <0x7>;
+    };
+
+  - |
+    irq1_intc: interrupt-controller@10000020 {
+       compatible = "brcm,bcm3380-l2-intc";
+       reg = <0x10000024 0x4>, <0x1000002c 0x4>,
+             <0x10000020 0x4>, <0x10000028 0x4>;
+       interrupt-controller;
+       #interrupt-cells = <1>;
+       interrupt-parent = <&cpu_intc>;
+       interrupts = <2>;
+    };
diff --git a/dts/Bindings/interrupt-controller/brcm,l2-intc.txt b/dts/Bindings/interrupt-controller/brcm,l2-intc.txt
deleted file mode 100644
index 021cf82239..0000000000
--- a/dts/Bindings/interrupt-controller/brcm,l2-intc.txt
+++ /dev/null
@@ -1,31 +0,0 @@
-Broadcom Generic Level 2 Interrupt Controller
-
-Required properties:
-
-- compatible: should be one of:
-	      "brcm,hif-spi-l2-intc" or
-	      "brcm,upg-aux-aon-l2-intc" or
-	      "brcm,l2-intc" for latched interrupt controllers
-              should be "brcm,bcm7271-l2-intc" for level interrupt controllers
-- reg: specifies the base physical address and size of the registers
-- interrupt-controller: identifies the node as an interrupt controller
-- #interrupt-cells: specifies the number of cells needed to encode an
-  interrupt source. Should be 1.
-- interrupts: specifies the interrupt line in the interrupt-parent irq space
-  to be used for cascading
-
-Optional properties:
-
-- brcm,irq-can-wake: If present, this means the L2 controller can be used as a
-  wakeup source for system suspend/resume.
-
-Example:
-
-hif_intr2_intc: interrupt-controller@f0441000 {
-	compatible = "brcm,l2-intc";
-	reg = <0xf0441000 0x30>;
-	interrupt-controller;
-	#interrupt-cells = <1>;
-	interrupt-parent = <&intc>;
-	interrupts = <0x0 0x20 0x0>;
-};
diff --git a/dts/Bindings/interrupt-controller/brcm,l2-intc.yaml b/dts/Bindings/interrupt-controller/brcm,l2-intc.yaml
new file mode 100644
index 0000000000..8961afca96
--- /dev/null
+++ b/dts/Bindings/interrupt-controller/brcm,l2-intc.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/brcm,l2-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Generic Level 2 Interrupt Controller
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - brcm,hif-spi-l2-intc
+              - brcm,upg-aux-aon-l2-intc
+          - const: brcm,l2-intc
+      - items:
+          - enum:
+              - brcm,bcm2711-l2-intc
+          - const: brcm,l2-intc
+      - items:
+          - const: brcm,bcm7271-l2-intc
+      - items:
+          - const: brcm,l2-intc
+
+  reg:
+    maxItems: 1
+    description: >
+      Specifies the base physical address and size of the registers
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-names:
+    maxItems: 1
+
+  brcm,irq-can-wake:
+    type: boolean
+    description: >
+      If present, this means the L2 controller can be used as a wakeup source
+      for system suspend/resume.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - "#interrupt-cells"
+  - interrupts
+
+examples:
+  - |
+    hif_intr2_intc: interrupt-controller@f0441000 {
+      compatible = "brcm,l2-intc";
+      reg = <0xf0441000 0x30>;
+      interrupt-controller;
+      #interrupt-cells = <1>;
+      interrupt-parent = <&intc>;
+      interrupts = <0x0 0x20 0x0>;
+    };
diff --git a/dts/Bindings/interrupt-controller/renesas,irqc.yaml b/dts/Bindings/interrupt-controller/renesas,irqc.yaml
index 79d0358e2f..620f01775e 100644
--- a/dts/Bindings/interrupt-controller/renesas,irqc.yaml
+++ b/dts/Bindings/interrupt-controller/renesas,irqc.yaml
@@ -36,6 +36,7 @@ properties:
           - renesas,intc-ex-r8a77980    # R-Car V3H
           - renesas,intc-ex-r8a77990    # R-Car E3
           - renesas,intc-ex-r8a77995    # R-Car D3
+          - renesas,intc-ex-r8a779a0    # R-Car V3U
       - const: renesas,irqc
 
   '#interrupt-cells':
diff --git a/dts/Bindings/interrupt-controller/sifive,plic-1.0.0.yaml b/dts/Bindings/interrupt-controller/sifive,plic-1.0.0.yaml
index 08d5a57ce0..0dfa6b26e0 100644
--- a/dts/Bindings/interrupt-controller/sifive,plic-1.0.0.yaml
+++ b/dts/Bindings/interrupt-controller/sifive,plic-1.0.0.yaml
@@ -45,6 +45,7 @@ properties:
     items:
       - enum:
           - sifive,fu540-c000-plic
+          - starfive,jh7100-plic
           - canaan,k210-plic
       - const: sifive,plic-1.0.0
 
@@ -61,6 +62,7 @@ properties:
 
   interrupts-extended:
     minItems: 1
+    maxItems: 15872
     description:
       Specifies which contexts are connected to the PLIC, with "-1" specifying
       that a context is not present. Each node pointed to should be a
@@ -89,12 +91,11 @@ examples:
       #interrupt-cells = <1>;
       compatible = "sifive,fu540-c000-plic", "sifive,plic-1.0.0";
       interrupt-controller;
-      interrupts-extended = <
-        &cpu0_intc 11
-        &cpu1_intc 11 &cpu1_intc 9
-        &cpu2_intc 11 &cpu2_intc 9
-        &cpu3_intc 11 &cpu3_intc 9
-        &cpu4_intc 11 &cpu4_intc 9>;
+      interrupts-extended = <&cpu0_intc 11>,
+                            <&cpu1_intc 11>, <&cpu1_intc 9>,
+                            <&cpu2_intc 11>, <&cpu2_intc 9>,
+                            <&cpu3_intc 11>, <&cpu3_intc 9>,
+                            <&cpu4_intc 11>, <&cpu4_intc 9>;
       reg = <0xc000000 0x4000000>;
       riscv,ndev = <10>;
     };
diff --git a/dts/Bindings/iommu/apple,dart.yaml b/dts/Bindings/iommu/apple,dart.yaml
index 94aa9e9afa..82ad669fee 100644
--- a/dts/Bindings/iommu/apple,dart.yaml
+++ b/dts/Bindings/iommu/apple,dart.yaml
@@ -41,6 +41,9 @@ properties:
       Has to be one. The single cell describes the stream id emitted by
       a master to the IOMMU.
 
+  power-domains:
+    maxItems: 1
+
 required:
   - compatible
   - reg
diff --git a/dts/Bindings/iommu/arm,smmu.yaml b/dts/Bindings/iommu/arm,smmu.yaml
index f66a3effba..da5381c8ee 100644
--- a/dts/Bindings/iommu/arm,smmu.yaml
+++ b/dts/Bindings/iommu/arm,smmu.yaml
@@ -38,10 +38,12 @@ properties:
               - qcom,sc7280-smmu-500
               - qcom,sc8180x-smmu-500
               - qcom,sdm845-smmu-500
+              - qcom,sdx55-smmu-500
               - qcom,sm6350-smmu-500
               - qcom,sm8150-smmu-500
               - qcom,sm8250-smmu-500
               - qcom,sm8350-smmu-500
+              - qcom,sm8450-smmu-500
           - const: arm,mmu-500
       - description: Qcom Adreno GPUs implementing "arm,smmu-v2"
         items:
diff --git a/dts/Bindings/ipmi/aspeed,ast2400-ibt-bmc.txt b/dts/Bindings/ipmi/aspeed,ast2400-ibt-bmc.txt
index c9902fd4b3..25f86da804 100644
--- a/dts/Bindings/ipmi/aspeed,ast2400-ibt-bmc.txt
+++ b/dts/Bindings/ipmi/aspeed,ast2400-ibt-bmc.txt
@@ -11,6 +11,7 @@ Required properties:
 	"aspeed,ast2500-ibt-bmc"
 	"aspeed,ast2600-ibt-bmc"
 - reg: physical address and size of the registers
+- clocks: clock for the device
 
 Optional properties:
 
@@ -23,4 +24,5 @@ Example:
 		compatible = "aspeed,ast2400-ibt-bmc";
 		reg = <0x1e789140 0x18>;
 		interrupts = <8>;
+		clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
 	};
diff --git a/dts/Bindings/leds/leds-bcm6328.txt b/dts/Bindings/leds/leds-bcm6328.txt
deleted file mode 100644
index a555d94084..0000000000
--- a/dts/Bindings/leds/leds-bcm6328.txt
+++ /dev/null
@@ -1,319 +0,0 @@
-LEDs connected to Broadcom BCM6328 controller
-
-This controller is present on BCM6318, BCM6328, BCM6362 and BCM63268.
-In these SoCs it's possible to control LEDs both as GPIOs or by hardware.
-However, on some devices there are Serial LEDs (LEDs connected to a 74x164
-controller), which can either be controlled by software (exporting the 74x164
-as spi-gpio. See Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml),
-or by hardware using this driver.
-Some of these Serial LEDs are hardware controlled (e.g. ethernet LEDs) and
-exporting the 74x164 as spi-gpio prevents those LEDs to be hardware
-controlled, so the only chance to keep them working is by using this driver.
-
-BCM6328 LED controller has a HWDIS register, which controls whether a LED
-should be controlled by a hardware signal instead of the MODE register value,
-with 0 meaning hardware control enabled and 1 hardware control disabled. This
-is usually 1:1 for hardware to LED signals, but through the activity/link
-registers you have some limited control over rerouting the LEDs (as
-explained later in brcm,link-signal-sources). Even if a LED is hardware
-controlled you are still able to make it blink or light it up if it isn't,
-but you can't turn it off if the hardware decides to light it up. For this
-reason, hardware controlled LEDs aren't registered as LED class devices.
-
-Required properties:
-  - compatible : should be "brcm,bcm6328-leds".
-  - #address-cells : must be 1.
-  - #size-cells : must be 0.
-  - reg : BCM6328 LED controller address and size.
-
-Optional properties:
-  - brcm,serial-leds : Boolean, enables Serial LEDs.
-    Default : false
-  - brcm,serial-mux : Boolean, enables Serial LEDs multiplexing.
-    Default : false
-  - brcm,serial-clk-low : Boolean, makes clock signal active low.
-    Default : false
-  - brcm,serial-dat-low : Boolean, makes data signal active low.
-    Default : false
-  - brcm,serial-shift-inv : Boolean, inverts Serial LEDs shift direction.
-    Default : false
-
-Each LED is represented as a sub-node of the brcm,bcm6328-leds device.
-
-LED sub-node required properties:
-  - reg : LED pin number (only LEDs 0 to 23 are valid).
-
-LED sub-node optional properties:
-  a) Optional properties for sub-nodes related to software controlled LEDs:
-    - label : see Documentation/devicetree/bindings/leds/common.txt
-    - active-low : Boolean, makes LED active low.
-      Default : false
-    - default-state : see
-      Documentation/devicetree/bindings/leds/common.txt
-    - linux,default-trigger : see
-      Documentation/devicetree/bindings/leds/common.txt
-
-  b) Optional properties for sub-nodes related to hardware controlled LEDs:
-    - brcm,hardware-controlled : Boolean, makes this LED hardware controlled.
-      Default : false
-    - brcm,link-signal-sources : An array of hardware link
-      signal sources. Up to four link hardware signals can get muxed into
-      these LEDs. Only valid for LEDs 0 to 7, where LED signals 0 to 3 may
-      be muxed to LEDs 0 to 3, and signals 4 to 7 may be muxed to LEDs
-      4 to 7. A signal can be muxed to more than one LED, and one LED can
-      have more than one source signal.
-    - brcm,activity-signal-sources : An array of hardware activity
-      signal sources. Up to four activity hardware signals can get muxed into
-      these LEDs. Only valid for LEDs 0 to 7, where LED signals 0 to 3 may
-      be muxed to LEDs 0 to 3, and signals 4 to 7 may be muxed to LEDs
-      4 to 7. A signal can be muxed to more than one LED, and one LED can
-      have more than one source signal.
-
-Examples:
-Scenario 1 : BCM6328 with 4 EPHY LEDs
-	leds0: led-controller@10000800 {
-		compatible = "brcm,bcm6328-leds";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x10000800 0x24>;
-
-		alarm_red@2 {
-			reg = <2>;
-			active-low;
-			label = "red:alarm";
-		};
-		inet_green@3 {
-			reg = <3>;
-			active-low;
-			label = "green:inet";
-		};
-		power_green@4 {
-			reg = <4>;
-			active-low;
-			label = "green:power";
-			default-state = "on";
-		};
-		ephy0_spd@17 {
-			reg = <17>;
-			brcm,hardware-controlled;
-		};
-		ephy1_spd@18 {
-			reg = <18>;
-			brcm,hardware-controlled;
-		};
-		ephy2_spd@19 {
-			reg = <19>;
-			brcm,hardware-controlled;
-		};
-		ephy3_spd@20 {
-			reg = <20>;
-			brcm,hardware-controlled;
-		};
-	};
-
-Scenario 2 : BCM63268 with Serial/GPHY0 LEDs
-	leds0: led-controller@10001900 {
-		compatible = "brcm,bcm6328-leds";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x10001900 0x24>;
-		brcm,serial-leds;
-		brcm,serial-dat-low;
-		brcm,serial-shift-inv;
-
-		gphy0_spd0@0 {
-			reg = <0>;
-			brcm,hardware-controlled;
-			brcm,link-signal-sources = <0>;
-		};
-		gphy0_spd1@1 {
-			reg = <1>;
-			brcm,hardware-controlled;
-			brcm,link-signal-sources = <1>;
-		};
-		inet_red@2 {
-			reg = <2>;
-			active-low;
-			label = "red:inet";
-		};
-		dsl_green@3 {
-			reg = <3>;
-			active-low;
-			label = "green:dsl";
-		};
-		usb_green@4 {
-			reg = <4>;
-			active-low;
-			label = "green:usb";
-		};
-		wps_green@7 {
-			reg = <7>;
-			active-low;
-			label = "green:wps";
-		};
-		inet_green@8 {
-			reg = <8>;
-			active-low;
-			label = "green:inet";
-		};
-		ephy0_act@9 {
-			reg = <9>;
-			brcm,hardware-controlled;
-		};
-		ephy1_act@10 {
-			reg = <10>;
-			brcm,hardware-controlled;
-		};
-		ephy2_act@11 {
-			reg = <11>;
-			brcm,hardware-controlled;
-		};
-		gphy0_act@12 {
-			reg = <12>;
-			brcm,hardware-controlled;
-		};
-		ephy0_spd@13 {
-			reg = <13>;
-			brcm,hardware-controlled;
-		};
-		ephy1_spd@14 {
-			reg = <14>;
-			brcm,hardware-controlled;
-		};
-		ephy2_spd@15 {
-			reg = <15>;
-			brcm,hardware-controlled;
-		};
-		power_green@20 {
-			reg = <20>;
-			active-low;
-			label = "green:power";
-			default-state = "on";
-		};
-	};
-
-Scenario 3 : BCM6362 with 1 LED for each EPHY
-	leds0: led-controller@10001900 {
-		compatible = "brcm,bcm6328-leds";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x10001900 0x24>;
-
-		usb@0 {
-			reg = <0>;
-			brcm,hardware-controlled;
-			brcm,link-signal-sources = <0>;
-			brcm,activity-signal-sources = <0>;
-			/* USB link/activity routed to USB LED */
-		};
-		inet@1 {
-			reg = <1>;
-			brcm,hardware-controlled;
-			brcm,activity-signal-sources = <1>;
-			/* INET activity routed to INET LED */
-		};
-		ephy0@4 {
-			reg = <4>;
-			brcm,hardware-controlled;
-			brcm,link-signal-sources = <4>;
-			/* EPHY0 link routed to EPHY0 LED */
-		};
-		ephy1@5 {
-			reg = <5>;
-			brcm,hardware-controlled;
-			brcm,link-signal-sources = <5>;
-			/* EPHY1 link routed to EPHY1 LED */
-		};
-		ephy2@6 {
-			reg = <6>;
-			brcm,hardware-controlled;
-			brcm,link-signal-sources = <6>;
-			/* EPHY2 link routed to EPHY2 LED */
-		};
-		ephy3@7 {
-			reg = <7>;
-			brcm,hardware-controlled;
-			brcm,link-signal-sources = <7>;
-			/* EPHY3 link routed to EPHY3 LED */
-		};
-		power_green@20 {
-			reg = <20>;
-			active-low;
-			label = "green:power";
-			default-state = "on";
-		};
-	};
-
-Scenario 4 : BCM6362 with 1 LED for all EPHYs
-	leds0: led-controller@10001900 {
-		compatible = "brcm,bcm6328-leds";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x10001900 0x24>;
-
-		usb@0 {
-			reg = <0>;
-			brcm,hardware-controlled;
-			brcm,link-signal-sources = <0 1>;
-			brcm,activity-signal-sources = <0 1>;
-			/* USB/INET link/activity routed to USB LED */
-		};
-		ephy@4 {
-			reg = <4>;
-			brcm,hardware-controlled;
-			brcm,link-signal-sources = <4 5 6 7>;
-			/* EPHY0/1/2/3 link routed to EPHY0 LED */
-		};
-		power_green@20 {
-			reg = <20>;
-			active-low;
-			label = "green:power";
-			default-state = "on";
-		};
-	};
-
-Scenario 5 : BCM6362 with EPHY LEDs swapped
-	leds0: led-controller@10001900 {
-		compatible = "brcm,bcm6328-leds";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x10001900 0x24>;
-
-		usb@0 {
-			reg = <0>;
-			brcm,hardware-controlled;
-			brcm,link-signal-sources = <0>;
-			brcm,activity-signal-sources = <0 1>;
-			/* USB link/act and INET act routed to USB LED */
-		};
-		ephy0@4 {
-			reg = <4>;
-			brcm,hardware-controlled;
-			brcm,link-signal-sources = <7>;
-			/* EPHY3 link routed to EPHY0 LED */
-		};
-		ephy1@5 {
-			reg = <5>;
-			brcm,hardware-controlled;
-			brcm,link-signal-sources = <6>;
-			/* EPHY2 link routed to EPHY1 LED */
-		};
-		ephy2@6 {
-			reg = <6>;
-			brcm,hardware-controlled;
-			brcm,link-signal-sources = <5>;
-			/* EPHY1 link routed to EPHY2 LED */
-		};
-		ephy3@7 {
-			reg = <7>;
-			brcm,hardware-controlled;
-			brcm,link-signal-sources = <4>;
-			/* EPHY0 link routed to EPHY3 LED */
-		};
-		power_green@20 {
-			reg = <20>;
-			active-low;
-			label = "green:power";
-			default-state = "on";
-		};
-	};
diff --git a/dts/Bindings/leds/leds-bcm6328.yaml b/dts/Bindings/leds/leds-bcm6328.yaml
new file mode 100644
index 0000000000..51cc0d82c1
--- /dev/null
+++ b/dts/Bindings/leds/leds-bcm6328.yaml
@@ -0,0 +1,404 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/leds-bcm6328.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LEDs connected to Broadcom BCM6328 controller
+
+maintainers:
+  - Álvaro Fernández Rojas <noltari@gmail.com>
+
+description: |
+  This controller is present on BCM6318, BCM6328, BCM6362 and BCM63268.
+  In these SoCs it's possible to control LEDs both as GPIOs or by hardware.
+  However, on some devices there are Serial LEDs (LEDs connected to a 74x164
+  controller), which can either be controlled by software (exporting the 74x164
+  as spi-gpio. See
+  Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml), or by hardware
+  using this driver.
+  Some of these Serial LEDs are hardware controlled (e.g. ethernet LEDs) and
+  exporting the 74x164 as spi-gpio prevents those LEDs to be hardware
+  controlled, so the only chance to keep them working is by using this driver.
+
+  BCM6328 LED controller has a HWDIS register, which controls whether a LED
+  should be controlled by a hardware signal instead of the MODE register value,
+  with 0 meaning hardware control enabled and 1 hardware control disabled. This
+  is usually 1:1 for hardware to LED signals, but through the activity/link
+  registers you have some limited control over rerouting the LEDs (as
+  explained later in brcm,link-signal-sources). Even if a LED is hardware
+  controlled you are still able to make it blink or light it up if it isn't,
+  but you can't turn it off if the hardware decides to light it up. For this
+  reason, hardware controlled LEDs aren't registered as LED class devices.
+
+  Each LED is represented as a sub-node of the brcm,bcm6328-leds device.
+
+properties:
+  compatible:
+    const: brcm,bcm6328-leds
+
+  reg:
+    maxItems: 1
+
+  brcm,serial-leds:
+    type: boolean
+    description: Enables Serial LEDs.
+
+  brcm,serial-mux:
+    type: boolean
+    description: Enables Serial LEDs multiplexing.
+
+  brcm,serial-clk-low:
+    type: boolean
+    description: Makes clock signal active low.
+
+  brcm,serial-dat-low:
+    type: boolean
+    description: Makes data signal active low.
+
+  brcm,serial-shift-inv:
+    type: boolean
+    description: Inverts Serial LEDs shift direction.
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "@[a-f0-9]+$":
+    type: object
+
+    $ref: common.yaml#
+
+    properties:
+      reg:
+        items:
+          - maximum: 23
+        description: LED pin number (only LEDs 0 to 23 are valid).
+
+      active-low:
+        type: boolean
+        description: Makes LED active low.
+
+      brcm,hardware-controlled:
+        type: boolean
+        description: Makes this LED hardware controlled.
+
+      brcm,link-signal-sources:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 1
+        maxItems: 4
+        description: >
+          An array of hardware link signal sources. Up to four link hardware
+          signals can get muxed into these LEDs. Only valid for LEDs 0 to 7,
+          where LED signals 0 to 3 may be muxed to LEDs 0 to 3, and signals 4 to
+          7 may be muxed to LEDs 4 to 7. A signal can be muxed to more than one
+          LED, and one LED can have more than one source signal.
+
+      brcm,activity-signal-sources:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 1
+        maxItems: 4
+        description: >
+          An array of hardware activity signal sources. Up to four activity
+          hardware signals can get muxed into these LEDs. Only valid for LEDs 0
+          to 7, where LED signals 0 to 3 may be muxed to LEDs 0 to 3, and
+          signals 4 to 7 may be muxed to LEDs 4 to 7. A signal can be muxed to
+          more than one LED, and one LED can have more than one source signal.
+
+    required:
+      - reg
+
+    unevaluatedProperties: false
+
+required:
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    /* BCM6328 with 4 EPHY LEDs */
+    led-controller@10000800 {
+        compatible = "brcm,bcm6328-leds";
+        #address-cells = <1>;
+        #size-cells = <0>;
+        reg = <0x10000800 0x24>;
+
+        alarm_red@2 {
+            reg = <2>;
+            active-low;
+            label = "red:alarm";
+        };
+
+        inet_green@3 {
+            reg = <3>;
+            active-low;
+            label = "green:inet";
+        };
+
+        power_green@4 {
+            reg = <4>;
+            active-low;
+            label = "green:power";
+            default-state = "on";
+        };
+
+        ephy0_spd@17 {
+            reg = <17>;
+            brcm,hardware-controlled;
+        };
+
+        ephy1_spd@18 {
+            reg = <18>;
+            brcm,hardware-controlled;
+        };
+
+        ephy2_spd@19 {
+            reg = <19>;
+            brcm,hardware-controlled;
+        };
+
+        ephy3_spd@20 {
+            reg = <20>;
+            brcm,hardware-controlled;
+        };
+    };
+  - |
+    /* BCM63268 with Serial/GPHY0 LEDs */
+    led-controller@10001900 {
+        compatible = "brcm,bcm6328-leds";
+        #address-cells = <1>;
+        #size-cells = <0>;
+        reg = <0x10001900 0x24>;
+        brcm,serial-leds;
+        brcm,serial-dat-low;
+        brcm,serial-shift-inv;
+
+        gphy0_spd0@0 {
+            reg = <0>;
+            brcm,hardware-controlled;
+            brcm,link-signal-sources = <0>;
+        };
+
+        gphy0_spd1@1 {
+            reg = <1>;
+            brcm,hardware-controlled;
+            brcm,link-signal-sources = <1>;
+        };
+
+        inet_red@2 {
+            reg = <2>;
+            active-low;
+            label = "red:inet";
+        };
+
+        dsl_green@3 {
+            reg = <3>;
+            active-low;
+            label = "green:dsl";
+        };
+
+        usb_green@4 {
+            reg = <4>;
+            active-low;
+            label = "green:usb";
+        };
+
+        wps_green@7 {
+            reg = <7>;
+            active-low;
+            label = "green:wps";
+        };
+
+        inet_green@8 {
+            reg = <8>;
+            active-low;
+            label = "green:inet";
+        };
+
+        ephy0_act@9 {
+            reg = <9>;
+            brcm,hardware-controlled;
+        };
+
+        ephy1_act@10 {
+            reg = <10>;
+            brcm,hardware-controlled;
+        };
+
+        ephy2_act@11 {
+            reg = <11>;
+            brcm,hardware-controlled;
+        };
+
+        gphy0_act@12 {
+            reg = <12>;
+            brcm,hardware-controlled;
+        };
+
+        ephy0_spd@13 {
+            reg = <13>;
+            brcm,hardware-controlled;
+        };
+
+        ephy1_spd@14 {
+            reg = <14>;
+            brcm,hardware-controlled;
+        };
+
+        ephy2_spd@15 {
+            reg = <15>;
+            brcm,hardware-controlled;
+        };
+
+        power_green@20 {
+            reg = <20>;
+            active-low;
+            label = "green:power";
+            default-state = "on";
+        };
+    };
+  - |
+    /* BCM6362 with 1 LED for each EPHY */
+    led-controller@10001900 {
+        compatible = "brcm,bcm6328-leds";
+        #address-cells = <1>;
+        #size-cells = <0>;
+        reg = <0x10001900 0x24>;
+
+        usb@0 {
+            reg = <0>;
+            brcm,hardware-controlled;
+            brcm,link-signal-sources = <0>;
+            brcm,activity-signal-sources = <0>;
+            /* USB link/activity routed to USB LED */
+        };
+
+        inet@1 {
+            reg = <1>;
+            brcm,hardware-controlled;
+            brcm,activity-signal-sources = <1>;
+            /* INET activity routed to INET LED */
+        };
+
+        ephy0@4 {
+            reg = <4>;
+            brcm,hardware-controlled;
+            brcm,link-signal-sources = <4>;
+            /* EPHY0 link routed to EPHY0 LED */
+        };
+
+        ephy1@5 {
+            reg = <5>;
+            brcm,hardware-controlled;
+            brcm,link-signal-sources = <5>;
+            /* EPHY1 link routed to EPHY1 LED */
+        };
+
+        ephy2@6 {
+            reg = <6>;
+            brcm,hardware-controlled;
+            brcm,link-signal-sources = <6>;
+            /* EPHY2 link routed to EPHY2 LED */
+        };
+
+        ephy3@7 {
+            reg = <7>;
+            brcm,hardware-controlled;
+            brcm,link-signal-sources = <7>;
+            /* EPHY3 link routed to EPHY3 LED */
+        };
+
+        power_green@20 {
+            reg = <20>;
+            active-low;
+            label = "green:power";
+            default-state = "on";
+        };
+    };
+  - |
+    /* BCM6362 with 1 LED for all EPHYs */
+    led-controller@10001900 {
+        compatible = "brcm,bcm6328-leds";
+        #address-cells = <1>;
+        #size-cells = <0>;
+        reg = <0x10001900 0x24>;
+
+        usb@0 {
+            reg = <0>;
+            brcm,hardware-controlled;
+            brcm,link-signal-sources = <0 1>;
+            brcm,activity-signal-sources = <0 1>;
+            /* USB/INET link/activity routed to USB LED */
+        };
+
+        ephy@4 {
+            reg = <4>;
+            brcm,hardware-controlled;
+            brcm,link-signal-sources = <4 5 6 7>;
+            /* EPHY0/1/2/3 link routed to EPHY0 LED */
+        };
+
+        power_green@20 {
+            reg = <20>;
+            active-low;
+            label = "green:power";
+            default-state = "on";
+        };
+    };
+  - |
+    /* BCM6362 with EPHY LEDs swapped */
+    led-controller@10001900 {
+        compatible = "brcm,bcm6328-leds";
+        #address-cells = <1>;
+        #size-cells = <0>;
+        reg = <0x10001900 0x24>;
+
+        usb@0 {
+            reg = <0>;
+            brcm,hardware-controlled;
+            brcm,link-signal-sources = <0>;
+            brcm,activity-signal-sources = <0 1>;
+            /* USB link/act and INET act routed to USB LED */
+        };
+
+        ephy0@4 {
+            reg = <4>;
+            brcm,hardware-controlled;
+            brcm,link-signal-sources = <7>;
+            /* EPHY3 link routed to EPHY0 LED */
+        };
+
+        ephy1@5 {
+            reg = <5>;
+            brcm,hardware-controlled;
+            brcm,link-signal-sources = <6>;
+            /* EPHY2 link routed to EPHY1 LED */
+        };
+
+        ephy2@6 {
+            reg = <6>;
+            brcm,hardware-controlled;
+            brcm,link-signal-sources = <5>;
+            /* EPHY1 link routed to EPHY2 LED */
+        };
+
+        ephy3@7 {
+            reg = <7>;
+            brcm,hardware-controlled;
+            brcm,link-signal-sources = <4>;
+            /* EPHY0 link routed to EPHY3 LED */
+        };
+
+        power_green@20 {
+            reg = <20>;
+            active-low;
+            label = "green:power";
+            default-state = "on";
+        };
+    };
diff --git a/dts/Bindings/leds/leds-mt6360.yaml b/dts/Bindings/leds/leds-mt6360.yaml
new file mode 100644
index 0000000000..b2fe6eb893
--- /dev/null
+++ b/dts/Bindings/leds/leds-mt6360.yaml
@@ -0,0 +1,159 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/leds-mt6360.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LED driver for MT6360 PMIC from MediaTek Integrated.
+
+maintainers:
+  - Gene Chen <gene_chen@richtek.com>
+
+description: |
+  This module is part of the MT6360 MFD device.
+  see Documentation/devicetree/bindings/mfd/mt6360.yaml
+  Add MT6360 LED driver include 2-channel Flash LED with torch/strobe mode,
+  and 4-channel RGB LED support Register/Flash/Breath Mode
+
+properties:
+  compatible:
+    const: mediatek,mt6360-led
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^(multi-)?led@[0-5]$":
+    type: object
+    $ref: common.yaml#
+    description:
+      Properties for a single LED.
+
+    properties:
+      reg:
+        description: Index of the LED.
+        enum:
+          - 0 # LED output ISINK1
+          - 1 # LED output ISINK2
+          - 2 # LED output ISINK3
+          - 3 # LED output ISINKML
+          - 4 # LED output FLASH1
+          - 5 # LED output FLASH2
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+   #include <dt-bindings/leds/common.h>
+   led-controller {
+     compatible = "mediatek,mt6360-led";
+     #address-cells = <1>;
+     #size-cells = <0>;
+
+     multi-led@0 {
+       reg = <0>;
+       function = LED_FUNCTION_INDICATOR;
+       color = <LED_COLOR_ID_RGB>;
+       led-max-microamp = <24000>;
+       #address-cells = <1>;
+       #size-cells = <0>;
+       led@0 {
+         reg = <0>;
+         color = <LED_COLOR_ID_RED>;
+       };
+       led@1 {
+         reg = <1>;
+         color = <LED_COLOR_ID_GREEN>;
+       };
+       led@2 {
+         reg = <2>;
+         color = <LED_COLOR_ID_BLUE>;
+       };
+     };
+     led@3 {
+       reg = <3>;
+       function = LED_FUNCTION_INDICATOR;
+       color = <LED_COLOR_ID_WHITE>;
+       led-max-microamp = <150000>;
+     };
+     led@4 {
+       reg = <4>;
+       function = LED_FUNCTION_FLASH;
+       color = <LED_COLOR_ID_WHITE>;
+       function-enumerator = <1>;
+       led-max-microamp = <200000>;
+       flash-max-microamp = <500000>;
+       flash-max-timeout-us = <1024000>;
+     };
+     led@5 {
+       reg = <5>;
+       function = LED_FUNCTION_FLASH;
+       color = <LED_COLOR_ID_WHITE>;
+       function-enumerator = <2>;
+       led-max-microamp = <200000>;
+       flash-max-microamp = <500000>;
+       flash-max-timeout-us = <1024000>;
+     };
+   };
+
+  - |
+
+   led-controller {
+     compatible = "mediatek,mt6360-led";
+     #address-cells = <1>;
+     #size-cells = <0>;
+
+     led@0 {
+       reg = <0>;
+       function = LED_FUNCTION_INDICATOR;
+       color = <LED_COLOR_ID_RED>;
+       led-max-microamp = <24000>;
+     };
+     led@1 {
+       reg = <1>;
+       function = LED_FUNCTION_INDICATOR;
+       color = <LED_COLOR_ID_GREEN>;
+       led-max-microamp = <24000>;
+     };
+     led@2 {
+       reg = <2>;
+       function = LED_FUNCTION_INDICATOR;
+       color = <LED_COLOR_ID_BLUE>;
+       led-max-microamp = <24000>;
+     };
+     led@3 {
+       reg = <3>;
+       function = LED_FUNCTION_INDICATOR;
+       color = <LED_COLOR_ID_WHITE>;
+       led-max-microamp = <150000>;
+     };
+     led@4 {
+       reg = <4>;
+       function = LED_FUNCTION_FLASH;
+       color = <LED_COLOR_ID_WHITE>;
+       function-enumerator = <1>;
+       led-max-microamp = <200000>;
+       flash-max-microamp = <500000>;
+       flash-max-timeout-us = <1024000>;
+     };
+     led@5 {
+       reg = <5>;
+       function = LED_FUNCTION_FLASH;
+       color = <LED_COLOR_ID_WHITE>;
+       function-enumerator = <2>;
+       led-max-microamp = <200000>;
+       flash-max-microamp = <500000>;
+       flash-max-timeout-us = <1024000>;
+     };
+   };
+...
diff --git a/dts/Bindings/mailbox/apple,mailbox.yaml b/dts/Bindings/mailbox/apple,mailbox.yaml
index 2c1704b34e..5c5c328b31 100644
--- a/dts/Bindings/mailbox/apple,mailbox.yaml
+++ b/dts/Bindings/mailbox/apple,mailbox.yaml
@@ -27,14 +27,20 @@ properties:
           for example for the display controller, the system management
           controller and the NVMe coprocessor.
         items:
-          - const: apple,t8103-asc-mailbox
+          - enum:
+              - apple,t8103-asc-mailbox
+              - apple,t6000-asc-mailbox
+          - const: apple,asc-mailbox-v4
 
       - description:
           M3 mailboxes are an older variant with a slightly different MMIO
           interface still found on the M1. It is used for the Thunderbolt
           co-processors.
         items:
-          - const: apple,t8103-m3-mailbox
+          - enum:
+              - apple,t8103-m3-mailbox
+              - apple,t6000-m3-mailbox
+          - const: apple,m3-mailbox-v2
 
   reg:
     maxItems: 1
@@ -56,6 +62,9 @@ properties:
   "#mbox-cells":
     const: 0
 
+  power-domains:
+    maxItems: 1
+
 required:
   - compatible
   - reg
@@ -68,7 +77,7 @@ additionalProperties: false
 examples:
   - |
         mailbox@77408000 {
-                compatible = "apple,t8103-asc-mailbox";
+                compatible = "apple,t8103-asc-mailbox", "apple,asc-mailbox-v4";
                 reg = <0x77408000 0x4000>;
                 interrupts = <1 583 4>, <1 584 4>, <1 585 4>, <1 586 4>;
                 interrupt-names = "send-empty", "send-not-empty",
diff --git a/dts/Bindings/mailbox/nvidia,tegra186-hsp.txt b/dts/Bindings/mailbox/nvidia,tegra186-hsp.txt
deleted file mode 100644
index ff3eafc5a8..0000000000
--- a/dts/Bindings/mailbox/nvidia,tegra186-hsp.txt
+++ /dev/null
@@ -1,72 +0,0 @@
-NVIDIA Tegra Hardware Synchronization Primitives (HSP)
-
-The HSP modules are used for the processors to share resources and communicate
-together. It provides a set of hardware synchronization primitives for
-interprocessor communication. So the interprocessor communication (IPC)
-protocols can use hardware synchronization primitives, when operating between
-two processors not in an SMP relationship.
-
-The features that HSP supported are shared mailboxes, shared semaphores,
-arbitrated semaphores and doorbells.
-
-Required properties:
-- name : Should be hsp
-- compatible
-    Array of strings.
-    one of:
-    - "nvidia,tegra186-hsp"
-    - "nvidia,tegra194-hsp", "nvidia,tegra186-hsp"
-- reg : Offset and length of the register set for the device.
-- interrupt-names
-    Array of strings.
-    Contains a list of names for the interrupts described by the interrupt
-    property. May contain the following entries, in any order:
-    - "doorbell"
-    - "sharedN", where 'N' is a number from zero up to the number of
-      external interrupts supported by the HSP instance minus one.
-    Users of this binding MUST look up entries in the interrupt property
-    by name, using this interrupt-names property to do so.
-- interrupts
-    Array of interrupt specifiers.
-    Must contain one entry per entry in the interrupt-names property,
-    in a matching order.
-- #mbox-cells : Should be 2.
-
-The mbox specifier of the "mboxes" property in the client node should contain
-two cells. The first cell determines the HSP type and the second cell is used
-to identify the mailbox that the client is going to use.
-
-For doorbells, the second cell specifies the index of the doorbell to use.
-
-For shared mailboxes, the second cell is composed of two fields:
-- bits 31..24:
-    A bit mask of flags that further specify how the shared mailbox will be
-    used. Valid flags are:
-    - bit 31:
-        Defines the direction of the mailbox. If set, the mailbox will be used
-        as a producer (i.e. used to send data). If cleared, the mailbox is the
-        consumer of data sent by a producer.
-
-- bits 23.. 0:
-    The index of the shared mailbox to use. The number of available mailboxes
-    may vary by instance of the HSP block and SoC generation.
-
-The following file contains definitions that can be used to construct mailbox
-specifiers:
-
-    <dt-bindings/mailbox/tegra186-hsp.h>
-
-Example:
-
-hsp_top0: hsp@3c00000 {
-	compatible = "nvidia,tegra186-hsp";
-	reg = <0x0 0x03c00000 0x0 0xa0000>;
-	interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
-	interrupt-names = "doorbell";
-	#mbox-cells = <2>;
-};
-
-client {
-	...
-	mboxes = <&hsp_top0 TEGRA_HSP_MBOX_TYPE_DB TEGRA_HSP_DB_MASTER_XXX>;
-};
diff --git a/dts/Bindings/mailbox/nvidia,tegra186-hsp.yaml b/dts/Bindings/mailbox/nvidia,tegra186-hsp.yaml
new file mode 100644
index 0000000000..9f7a7296b5
--- /dev/null
+++ b/dts/Bindings/mailbox/nvidia,tegra186-hsp.yaml
@@ -0,0 +1,114 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mailbox/nvidia,tegra186-hsp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra Hardware Synchronization Primitives (HSP)
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+description: |
+  The HSP modules are used for the processors to share resources and
+  communicate together. It provides a set of hardware synchronization
+  primitives for interprocessor communication. So the interprocessor
+  communication (IPC) protocols can use hardware synchronization
+  primitives, when operating between two processors not in an SMP
+  relationship.
+
+  The features that HSP supported are shared mailboxes, shared
+  semaphores, arbitrated semaphores and doorbells.
+
+  The mbox specifier of the "mboxes" property in the client node should
+  contain two cells. The first cell determines the HSP type and the
+  second cell is used to identify the mailbox that the client is going
+  to use.
+
+  For doorbells, the second cell specifies the index of the doorbell to
+  use.
+
+  For shared mailboxes, the second cell is composed of two fields:
+    - bits 31..24:
+        A bit mask of flags that further specify how the shared mailbox
+        will be used. Valid flags are:
+          - bit 31:
+              Defines the direction of the mailbox. If set, the mailbox
+              will be used as a producer (i.e. used to send data). If
+              cleared, the mailbox is the consumer of data sent by a
+              producer.
+
+    - bits 23..0:
+        The index of the shared mailbox to use. The number of available
+        mailboxes may vary by instance of the HSP block and SoC
+        generation.
+
+    The following file contains definitions that can be used to
+    construct mailbox specifiers:
+
+        <dt-bindings/mailbox/tegra186-hsp.h>
+
+properties:
+  $nodename:
+    pattern: "^hsp@[0-9a-f]+$"
+
+  compatible:
+    oneOf:
+      - const: nvidia,tegra186-hsp
+      - const: nvidia,tegra194-hsp
+      - items:
+          - const: nvidia,tegra234-hsp
+          - const: nvidia,tegra194-hsp
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 9
+
+  interrupt-names:
+    oneOf:
+      # shared interrupts are optional
+      - items:
+          - const: doorbell
+
+      - items:
+          - const: doorbell
+          - pattern: "^shared[0-7]$"
+          - pattern: "^shared[0-7]$"
+          - pattern: "^shared[0-7]$"
+          - pattern: "^shared[0-7]$"
+          - pattern: "^shared[0-7]$"
+          - pattern: "^shared[0-7]$"
+          - pattern: "^shared[0-7]$"
+          - pattern: "^shared[0-7]$"
+
+      - items:
+          - pattern: "^shared[0-7]$"
+          - pattern: "^shared[0-7]$"
+          - pattern: "^shared[0-7]$"
+          - pattern: "^shared[0-7]$"
+
+  "#mbox-cells":
+    const: 2
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/mailbox/tegra186-hsp.h>
+
+    hsp_top0: hsp@3c00000 {
+        compatible = "nvidia,tegra186-hsp";
+        reg = <0x03c00000 0xa0000>;
+        interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "doorbell";
+        #mbox-cells = <2>;
+    };
+
+    client {
+        mboxes = <&hsp_top0 TEGRA_HSP_MBOX_TYPE_DB TEGRA_HSP_DB_MASTER_CCPLEX>;
+    };
diff --git a/dts/Bindings/mailbox/ti,omap-mailbox.yaml b/dts/Bindings/mailbox/ti,omap-mailbox.yaml
index e864d79816..d433e496ec 100644
--- a/dts/Bindings/mailbox/ti,omap-mailbox.yaml
+++ b/dts/Bindings/mailbox/ti,omap-mailbox.yaml
@@ -180,15 +180,6 @@ allOf:
         compatible:
           enum:
             - ti,am654-mailbox
-    then:
-      required:
-        - interrupt-parent
-
-  - if:
-      properties:
-        compatible:
-          enum:
-            - ti,am654-mailbox
             - ti,am64-mailbox
     then:
       properties:
diff --git a/dts/Bindings/media/allwinner,sun4i-a10-video-engine.yaml b/dts/Bindings/media/allwinner,sun4i-a10-video-engine.yaml
index c34303b87a..c3de96d103 100644
--- a/dts/Bindings/media/allwinner,sun4i-a10-video-engine.yaml
+++ b/dts/Bindings/media/allwinner,sun4i-a10-video-engine.yaml
@@ -20,6 +20,7 @@ properties:
       - allwinner,sun8i-h3-video-engine
       - allwinner,sun8i-v3s-video-engine
       - allwinner,sun8i-r40-video-engine
+      - allwinner,sun20i-d1-video-engine
       - allwinner,sun50i-a64-video-engine
       - allwinner,sun50i-h5-video-engine
       - allwinner,sun50i-h6-video-engine
diff --git a/dts/Bindings/media/allwinner,sun50i-h6-vpu-g2.yaml b/dts/Bindings/media/allwinner,sun50i-h6-vpu-g2.yaml
new file mode 100644
index 0000000000..24d7bf2149
--- /dev/null
+++ b/dts/Bindings/media/allwinner,sun50i-h6-vpu-g2.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/media/allwinner,sun50i-h6-vpu-g2.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Hantro G2 VPU codec implemented on Allwinner H6 SoC
+
+maintainers:
+  - Jernej Skrabec <jernej.skrabec@gmail.com>
+
+description:
+  Hantro G2 video decode accelerator present on Allwinner H6 SoC.
+
+properties:
+  compatible:
+    const: allwinner,sun50i-h6-vpu-g2
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Bus Clock
+      - description: Module Clock
+
+  clock-names:
+    items:
+      - const: bus
+      - const: mod
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/sun50i-h6-ccu.h>
+    #include <dt-bindings/reset/sun50i-h6-ccu.h>
+
+    video-codec-g2@1c00000 {
+        compatible = "allwinner,sun50i-h6-vpu-g2";
+        reg = <0x01c00000 0x1000>;
+        interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&ccu CLK_BUS_VP9>, <&ccu CLK_VP9>;
+        clock-names = "bus", "mod";
+        resets = <&ccu RST_BUS_VP9>;
+    };
+
+...
diff --git a/dts/Bindings/media/i2c/adv748x.txt b/dts/Bindings/media/i2c/adv748x.txt
deleted file mode 100644
index 4f91686e54..0000000000
--- a/dts/Bindings/media/i2c/adv748x.txt
+++ /dev/null
@@ -1,116 +0,0 @@
-* Analog Devices ADV748X video decoder with HDMI receiver
-
-The ADV7481 and ADV7482 are multi format video decoders with an integrated
-HDMI receiver. They can output CSI-2 on two independent outputs TXA and TXB
-from three input sources HDMI, analog and TTL.
-
-Required Properties:
-
-  - compatible: Must contain one of the following
-    - "adi,adv7481" for the ADV7481
-    - "adi,adv7482" for the ADV7482
-
-  - reg: I2C slave addresses
-    The ADV748x has up to twelve 256-byte maps that can be accessed via the
-    main I2C ports. Each map has it own I2C address and acts as a standard
-    slave device on the I2C bus. The main address is mandatory, others are
-    optional and remain at default values if not specified.
-
-Optional Properties:
-
-  - interrupt-names: Should specify the interrupts as "intrq1", "intrq2" and/or
-		     "intrq3". All interrupts are optional. The "intrq3" interrupt
-		     is only available on the adv7481
-  - interrupts: Specify the interrupt lines for the ADV748x
-  - reg-names : Names of maps with programmable addresses.
-		It shall contain all maps needing a non-default address.
-		Possible map names are:
-		  "main", "dpll", "cp", "hdmi", "edid", "repeater",
-		  "infoframe", "cbus", "cec", "sdp", "txa", "txb"
-
-The device node must contain one 'port' child node per device input and output
-port, in accordance with the video interface bindings defined in
-Documentation/devicetree/bindings/media/video-interfaces.txt. The port nodes
-are numbered as follows.
-
-	  Name		Type		Port
-	---------------------------------------
-	  AIN0		sink		0
-	  AIN1		sink		1
-	  AIN2		sink		2
-	  AIN3		sink		3
-	  AIN4		sink		4
-	  AIN5		sink		5
-	  AIN6		sink		6
-	  AIN7		sink		7
-	  HDMI		sink		8
-	  TTL		sink		9
-	  TXA		source		10
-	  TXB		source		11
-
-The digital output port nodes, when present, shall contain at least one
-endpoint. Each of those endpoints shall contain the data-lanes property as
-described in video-interfaces.txt.
-
-Required source endpoint properties:
-  - data-lanes: an array of physical data lane indexes
-    The accepted value(s) for this property depends on which of the two
-    sources are described. For TXA 1, 2 or 4 data lanes can be described
-    while for TXB only 1 data lane is valid. See video-interfaces.txt
-    for detailed description.
-
-Ports are optional if they are not connected to anything at the hardware level.
-
-Example:
-
-	video-receiver@70 {
-		compatible = "adi,adv7482";
-		reg = <0x70 0x71 0x72 0x73 0x74 0x75
-		       0x60 0x61 0x62 0x63 0x64 0x65>;
-		reg-names = "main", "dpll", "cp", "hdmi", "edid", "repeater",
-			    "infoframe", "cbus", "cec", "sdp", "txa", "txb";
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		interrupt-parent = <&gpio6>;
-		interrupt-names = "intrq1", "intrq2";
-		interrupts = <30 IRQ_TYPE_LEVEL_LOW>,
-			     <31 IRQ_TYPE_LEVEL_LOW>;
-
-		port@7 {
-			reg = <7>;
-
-			adv7482_ain7: endpoint {
-				remote-endpoint = <&cvbs_in>;
-			};
-		};
-
-		port@8 {
-			reg = <8>;
-
-			adv7482_hdmi: endpoint {
-				remote-endpoint = <&hdmi_in>;
-			};
-		};
-
-		port@a {
-			reg = <10>;
-
-			adv7482_txa: endpoint {
-				clock-lanes = <0>;
-				data-lanes = <1 2 3 4>;
-				remote-endpoint = <&csi40_in>;
-			};
-		};
-
-		port@b {
-			reg = <11>;
-
-			adv7482_txb: endpoint {
-				clock-lanes = <0>;
-				data-lanes = <1>;
-				remote-endpoint = <&csi20_in>;
-			};
-		};
-	};
diff --git a/dts/Bindings/media/i2c/adv748x.yaml b/dts/Bindings/media/i2c/adv748x.yaml
new file mode 100644
index 0000000000..d635308140
--- /dev/null
+++ b/dts/Bindings/media/i2c/adv748x.yaml
@@ -0,0 +1,212 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/adv748x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADV748X video decoder with HDMI receiver
+
+maintainers:
+  - Kieran Bingham <kieran.bingham@ideasonboard.com>
+  - Niklas Söderlund <niklas.soderlund@ragnatech.se>
+
+description:
+  The ADV7481 and ADV7482 are multi format video decoders with an integrated
+  HDMI receiver. They can output CSI-2 on two independent outputs TXA and TXB
+  from three input sources HDMI, analog and TTL.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - adi,adv7481
+          - adi,adv7482
+
+  reg:
+    minItems: 1
+    maxItems: 12
+    description:
+      The ADV748x has up to twelve 256-byte maps that can be accessed via the
+      main I2C ports. Each map has it own I2C address and acts as a standard
+      slave device on the I2C bus. The main address is mandatory, others are
+      optional and remain at default values if not specified.
+
+  reg-names:
+    minItems: 1
+    items:
+      - const: main
+      - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ]
+      - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ]
+      - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ]
+      - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ]
+      - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ]
+      - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ]
+      - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ]
+      - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ]
+      - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ]
+      - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ]
+      - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ]
+
+  interrupts: true
+
+  interrupt-names: true
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    patternProperties:
+      "^port@[0-7]$":
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Input port nodes for analog inputs AIN[0-7].
+
+    properties:
+      port@8:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Input port node for HDMI.
+
+      port@9:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Input port node for TTL.
+
+      port@a:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Output port node, single endpoint describing the CSI-2 transmitter TXA.
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+      port@b:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Output port node, single endpoint describing the CSI-2 transmitter TXB.
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                maxItems: 1
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: adi,adv7481
+    then:
+      properties:
+        interrupts:
+          minItems: 1
+          maxItems: 3
+
+        interrupt-names:
+          minItems: 1
+          maxItems: 3
+          items:
+            enum: [ intrq1, intrq2, intrq3 ]
+    else:
+      properties:
+        interrupts:
+          minItems: 1
+          maxItems: 2
+
+        interrupt-names:
+          minItems: 1
+          maxItems: 2
+          items:
+            enum: [ intrq1, intrq2 ]
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - ports
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        video-receiver@70 {
+            compatible = "adi,adv7482";
+            reg = <0x70 0x71 0x72 0x73 0x74 0x75
+                   0x60 0x61 0x62 0x63 0x64 0x65>;
+            reg-names = "main", "dpll", "cp", "hdmi", "edid", "repeater",
+                        "infoframe", "cbus", "cec", "sdp", "txa", "txb";
+
+            interrupt-parent = <&gpio6>;
+            interrupts = <30 IRQ_TYPE_LEVEL_LOW>, <31 IRQ_TYPE_LEVEL_LOW>;
+            interrupt-names = "intrq1", "intrq2";
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@7 {
+                    reg = <7>;
+
+                    adv7482_ain7: endpoint {
+                        remote-endpoint = <&cvbs_in>;
+                    };
+                };
+
+                port@8 {
+                    reg = <8>;
+
+                    adv7482_hdmi: endpoint {
+                        remote-endpoint = <&hdmi_in>;
+                    };
+                };
+
+                port@a {
+                    reg = <10>;
+
+                    adv7482_txa: endpoint {
+                        clock-lanes = <0>;
+                        data-lanes = <1 2 3 4>;
+                        remote-endpoint = <&csi40_in>;
+                    };
+                };
+
+                port@b {
+                    reg = <11>;
+
+                    adv7482_txb: endpoint {
+                        clock-lanes = <0>;
+                        data-lanes = <1>;
+                        remote-endpoint = <&csi20_in>;
+                    };
+                };
+            };
+        };
+    };
diff --git a/dts/Bindings/media/i2c/maxim,max96712.yaml b/dts/Bindings/media/i2c/maxim,max96712.yaml
new file mode 100644
index 0000000000..444f24838d
--- /dev/null
+++ b/dts/Bindings/media/i2c/maxim,max96712.yaml
@@ -0,0 +1,111 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2021 Renesas Electronics Corp.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/maxim,max96712.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Quad GMSL2 to CSI-2 Deserializer with GMSL1 Compatibility
+
+maintainers:
+  - Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
+
+description: |
+  The MAX96712 deserializer converts GMSL2 or GMSL1 serial inputs into MIPI
+  CSI-2 D-PHY or C-PHY formatted outputs. The device allows each link to
+  simultaneously transmit bidirectional control-channel data while forward
+  video transmissions are in progress. The MAX96712 can accommodate as many as
+  four remotely located sensors using industry-standard coax or STP
+  interconnects.
+
+  Each GMSL2 serial link operates at a fixed rate of 3Gbps or 6Gbps in the
+  forward direction and 187.5Mbps in the reverse direction. In GMSL1 mode, the
+  MAX96712 can be paired with first-generation 3.12Gbps or 1.5Gbps GMSL1
+  serializers or operate up to 3.12Gbps with GMSL2 serializers in GMSL1 mode.
+
+properties:
+  compatible:
+    const: maxim,max96712
+
+  reg:
+    description: I2C device address
+    maxItems: 1
+
+  enable-gpios: true
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: GMSL Input 0
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: GMSL Input 1
+
+      port@2:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: GMSL Input 2
+
+      port@3:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: GMSL Input 3
+
+      port@4:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: CSI-2 Output
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes: true
+
+            required:
+              - data-lanes
+
+    required:
+      - port@4
+
+required:
+  - compatible
+  - reg
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c@e6508000 {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            reg = <0 0xe6508000>;
+
+            gmsl0: gmsl-deserializer@49 {
+                    compatible = "maxim,max96712";
+                    reg = <0x49>;
+                    enable-gpios = <&pca9654_a 0 GPIO_ACTIVE_HIGH>;
+
+                    ports {
+                            #address-cells = <1>;
+                            #size-cells = <0>;
+
+                            port@4 {
+                                    reg = <4>;
+                                    max96712_out0: endpoint {
+                                            clock-lanes = <0>;
+                                            data-lanes = <1 2 3 4>;
+                                            remote-endpoint = <&csi40_in>;
+                                    };
+                            };
+                    };
+            };
+    };
diff --git a/dts/Bindings/media/nvidia,tegra-vde.txt b/dts/Bindings/media/nvidia,tegra-vde.txt
deleted file mode 100644
index 602169b8aa..0000000000
--- a/dts/Bindings/media/nvidia,tegra-vde.txt
+++ /dev/null
@@ -1,64 +0,0 @@
-NVIDIA Tegra Video Decoder Engine
-
-Required properties:
-- compatible : Must contain one of the following values:
-   - "nvidia,tegra20-vde"
-   - "nvidia,tegra30-vde"
-   - "nvidia,tegra114-vde"
-   - "nvidia,tegra124-vde"
-   - "nvidia,tegra132-vde"
-- reg : Must contain an entry for each entry in reg-names.
-- reg-names : Must include the following entries:
-  - sxe
-  - bsev
-  - mbe
-  - ppe
-  - mce
-  - tfe
-  - ppb
-  - vdma
-  - frameid
-- iram : Must contain phandle to the mmio-sram device node that represents
-         IRAM region used by VDE.
-- interrupts : Must contain an entry for each entry in interrupt-names.
-- interrupt-names : Must include the following entries:
-  - sync-token
-  - bsev
-  - sxe
-- clocks : Must include the following entries:
-  - vde
-- resets : Must contain an entry for each entry in reset-names.
-- reset-names : Should include the following entries:
-  - vde
-
-Optional properties:
-- resets : Must contain an entry for each entry in reset-names.
-- reset-names : Must include the following entries:
-  - mc
-- iommus: Must contain phandle to the IOMMU device node.
-
-Example:
-
-video-codec@6001a000 {
-	compatible = "nvidia,tegra20-vde";
-	reg = <0x6001a000 0x1000 /* Syntax Engine */
-	       0x6001b000 0x1000 /* Video Bitstream Engine */
-	       0x6001c000  0x100 /* Macroblock Engine */
-	       0x6001c200  0x100 /* Post-processing Engine */
-	       0x6001c400  0x100 /* Motion Compensation Engine */
-	       0x6001c600  0x100 /* Transform Engine */
-	       0x6001c800  0x100 /* Pixel prediction block */
-	       0x6001ca00  0x100 /* Video DMA */
-	       0x6001d800  0x300 /* Video frame controls */>;
-	reg-names = "sxe", "bsev", "mbe", "ppe", "mce",
-		    "tfe", "ppb", "vdma", "frameid";
-	iram = <&vde_pool>; /* IRAM region */
-	interrupts = <GIC_SPI  9 IRQ_TYPE_LEVEL_HIGH>, /* Sync token interrupt */
-		     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, /* BSE-V interrupt */
-		     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; /* SXE interrupt */
-	interrupt-names = "sync-token", "bsev", "sxe";
-	clocks = <&tegra_car TEGRA20_CLK_VDE>;
-	reset-names = "vde", "mc";
-	resets = <&tegra_car 61>, <&mc TEGRA20_MC_RESET_VDE>;
-	iommus = <&mc TEGRA_SWGROUP_VDE>;
-};
diff --git a/dts/Bindings/media/nvidia,tegra-vde.yaml b/dts/Bindings/media/nvidia,tegra-vde.yaml
new file mode 100644
index 0000000000..4ecdee1be3
--- /dev/null
+++ b/dts/Bindings/media/nvidia,tegra-vde.yaml
@@ -0,0 +1,119 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/nvidia,tegra-vde.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra Video Decoder Engine
+
+maintainers:
+  - Dmitry Osipenko <digetx@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - nvidia,tegra132-vde
+              - nvidia,tegra124-vde
+              - nvidia,tegra114-vde
+      - items:
+          - const: nvidia,tegra30-vde
+          - const: nvidia,tegra20-vde
+      - items:
+          - const: nvidia,tegra20-vde
+
+  reg:
+    maxItems: 9
+
+  reg-names:
+    items:
+      - const: sxe
+      - const: bsev
+      - const: mbe
+      - const: ppe
+      - const: mce
+      - const: tfe
+      - const: ppb
+      - const: vdma
+      - const: frameid
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 2
+
+  reset-names:
+    items:
+      - const: vde
+      - const: mc
+
+  interrupts:
+    maxItems: 3
+
+  interrupt-names:
+    items:
+      - const: sync-token
+      - const: bsev
+      - const: sxe
+
+  iommus:
+    maxItems: 1
+
+  iram:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle of the SRAM MMIO node.
+
+  operating-points-v2:
+    description:
+      Should contain freqs and voltages and opp-supported-hw property,
+      which is a bitfield indicating SoC speedo or process ID mask.
+
+  power-domains:
+    maxItems: 1
+    description:
+      Phandle to the SoC core power domain.
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - resets
+  - reset-names
+  - interrupts
+  - interrupt-names
+
+additionalProperties: false
+
+examples:
+  - |
+    video-codec@6001a000 {
+      compatible = "nvidia,tegra20-vde";
+      reg = <0x6001a000 0x1000>, /* Syntax Engine */
+            <0x6001b000 0x1000>, /* Video Bitstream Engine */
+            <0x6001c000  0x100>, /* Macroblock Engine */
+            <0x6001c200  0x100>, /* Post-processing Engine */
+            <0x6001c400  0x100>, /* Motion Compensation Engine */
+            <0x6001c600  0x100>, /* Transform Engine */
+            <0x6001c800  0x100>, /* Pixel prediction block */
+            <0x6001ca00  0x100>, /* Video DMA */
+            <0x6001d800  0x300>; /* Video frame controls */
+      reg-names = "sxe", "bsev", "mbe", "ppe", "mce",
+                  "tfe", "ppb", "vdma", "frameid";
+      iram = <&iram>; /* IRAM MMIO region */
+      interrupts = <0  9 4>, /* Sync token */
+                   <0 10 4>, /* BSE-V */
+                   <0 12 4>; /* SXE */
+      interrupt-names = "sync-token", "bsev", "sxe";
+      clocks = <&clk 61>;
+      reset-names = "vde", "mc";
+      resets = <&rst 61>, <&mem 13>;
+      iommus = <&mem 15>;
+      operating-points-v2 = <&dvfs_opp_table>;
+      power-domains = <&domain>;
+    };
diff --git a/dts/Bindings/media/nxp,imx7-mipi-csi2.yaml b/dts/Bindings/media/nxp,imx7-mipi-csi2.yaml
index 1ef849dc74..e2e6e9aa0f 100644
--- a/dts/Bindings/media/nxp,imx7-mipi-csi2.yaml
+++ b/dts/Bindings/media/nxp,imx7-mipi-csi2.yaml
@@ -81,14 +81,12 @@ properties:
               data-lanes:
                 description:
                   Note that 'fsl,imx7-mipi-csi2' only supports up to 2 data lines.
+                minItems: 1
                 items:
-                  minItems: 1
-                  maxItems: 4
-                  items:
-                    - const: 1
-                    - const: 2
-                    - const: 3
-                    - const: 4
+                  - const: 1
+                  - const: 2
+                  - const: 3
+                  - const: 4
 
             required:
               - data-lanes
diff --git a/dts/Bindings/media/nxp,imx8mq-mipi-csi2.yaml b/dts/Bindings/media/nxp,imx8mq-mipi-csi2.yaml
index 9c04fa85ee..1b3e1c4b99 100644
--- a/dts/Bindings/media/nxp,imx8mq-mipi-csi2.yaml
+++ b/dts/Bindings/media/nxp,imx8mq-mipi-csi2.yaml
@@ -87,14 +87,12 @@ properties:
 
             properties:
               data-lanes:
+                minItems: 1
                 items:
-                  minItems: 1
-                  maxItems: 4
-                  items:
-                    - const: 1
-                    - const: 2
-                    - const: 3
-                    - const: 4
+                  - const: 1
+                  - const: 2
+                  - const: 3
+                  - const: 4
 
             required:
               - data-lanes
diff --git a/dts/Bindings/media/renesas,jpu.txt b/dts/Bindings/media/renesas,jpu.txt
deleted file mode 100644
index d3436e5190..0000000000
--- a/dts/Bindings/media/renesas,jpu.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-* Renesas JPEG Processing Unit
-
-The JPEG processing unit (JPU) incorporates the JPEG codec with an encoding
-and decoding function conforming to the JPEG baseline process, so that the JPU
-can encode image data and decode JPEG data quickly.
-
-Required properties:
-- compatible: "renesas,jpu-<soctype>", "renesas,rcar-gen2-jpu" as fallback.
-	Examples with soctypes are:
-	  - "renesas,jpu-r8a7790" for R-Car H2
-	  - "renesas,jpu-r8a7791" for R-Car M2-W
-	  - "renesas,jpu-r8a7792" for R-Car V2H
-	  - "renesas,jpu-r8a7793" for R-Car M2-N
-
-  - reg: Base address and length of the registers block for the JPU.
-  - interrupts: JPU interrupt specifier.
-  - clocks: A phandle + clock-specifier pair for the JPU functional clock.
-
-Example: R8A7790 (R-Car H2) JPU node
-	jpeg-codec@fe980000 {
-		compatible = "renesas,jpu-r8a7790", "renesas,rcar-gen2-jpu";
-		reg = <0 0xfe980000 0 0x10300>;
-		interrupts = <0 272 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp1_clks R8A7790_CLK_JPU>;
-	};
diff --git a/dts/Bindings/media/renesas,jpu.yaml b/dts/Bindings/media/renesas,jpu.yaml
new file mode 100644
index 0000000000..2f55968e86
--- /dev/null
+++ b/dts/Bindings/media/renesas,jpu.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/renesas,jpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas JPEG Processing Unit
+
+maintainers:
+  - Mikhail Ulyanov <mikhail.ulyanov@cogentembedded.com>
+
+description:
+  The JPEG processing unit (JPU) incorporates the JPEG codec with an encoding
+  and decoding function conforming to the JPEG baseline process, so that the
+  JPU can encode image data and decode JPEG data quickly.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,jpu-r8a7790      # R-Car H2
+          - renesas,jpu-r8a7791      # R-Car M2-W
+          - renesas,jpu-r8a7792      # R-Car V2H
+          - renesas,jpu-r8a7793      # R-Car M2-N
+      - const: renesas,rcar-gen2-jpu # R-Car Gen2
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - power-domains
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7790-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a7790-sysc.h>
+
+    jpeg-codec@fe980000 {
+            compatible = "renesas,jpu-r8a7790", "renesas,rcar-gen2-jpu";
+            reg = <0xfe980000 0x10300>;
+            interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&cpg CPG_MOD 106>;
+            power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+            resets = <&cpg 106>;
+    };
diff --git a/dts/Bindings/media/st,stm32-dma2d.yaml b/dts/Bindings/media/st,stm32-dma2d.yaml
new file mode 100644
index 0000000000..f97b4a2466
--- /dev/null
+++ b/dts/Bindings/media/st,stm32-dma2d.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/st,stm32-dma2d.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 Chrom-Art Accelerator DMA2D binding
+
+description:
+  Chrom-ART Accelerator(DMA2D), graphical hardware accelerator
+  enabling enhanced graphical user interface with minimum CPU load
+
+  It can perform the following operations.
+
+  - Filling a part or the whole of a destination image with a specific color.
+  - Copying a part or the whole of a source image into a part or the whole of
+    a destination image.
+  - Copying a part or the whole of a source image into a part or the whole of
+    a destination image with a pixel format conversion.
+  - Blending a part and/or two complete source images with different pixel
+    format and copy the result into a part or the whole of a destination image
+    with a different color format. (TODO)
+
+
+maintainers:
+  - Dillon Min <dillon.minfei@gmail.com>
+
+properties:
+  compatible:
+    const: st,stm32-dma2d
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: dma2d
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/stm32fx-clock.h>
+    #include <dt-bindings/mfd/stm32f4-rcc.h>
+    dma2d: dma2d@4002b000 {
+        compatible = "st,stm32-dma2d";
+        reg = <0x4002b000 0xc00>;
+        interrupts = <90>;
+        resets = <&rcc STM32F4_AHB1_RESET(DMA2D)>;
+        clocks = <&rcc 0 STM32F4_AHB1_CLOCK(DMA2D)>;
+        clock-names = "dma2d";
+    };
+
+...
diff --git a/dts/Bindings/memory-controllers/nvidia,tegra186-mc.yaml b/dts/Bindings/memory-controllers/nvidia,tegra186-mc.yaml
index 611bda38d1..13c4c82fd0 100644
--- a/dts/Bindings/memory-controllers/nvidia,tegra186-mc.yaml
+++ b/dts/Bindings/memory-controllers/nvidia,tegra186-mc.yaml
@@ -31,12 +31,15 @@ properties:
       - enum:
           - nvidia,tegra186-mc
           - nvidia,tegra194-mc
+          - nvidia,tegra234-mc
 
   reg:
-    maxItems: 1
+    minItems: 1
+    maxItems: 3
 
   interrupts:
-    maxItems: 1
+    items:
+      - description: MC general interrupt
 
   "#address-cells":
     const: 2
@@ -48,6 +51,9 @@ properties:
 
   dma-ranges: true
 
+  "#interconnect-cells":
+    const: 1
+
 patternProperties:
   "^external-memory-controller@[0-9a-f]+$":
     description:
@@ -63,12 +69,15 @@ patternProperties:
           - enum:
               - nvidia,tegra186-emc
               - nvidia,tegra194-emc
+              - nvidia,tegra234-emc
 
       reg:
-        maxItems: 1
+        minItems: 1
+        maxItems: 2
 
       interrupts:
-        maxItems: 1
+        items:
+          - description: EMC general interrupt
 
       clocks:
         items:
@@ -78,11 +87,83 @@ patternProperties:
         items:
           - const: emc
 
+      "#interconnect-cells":
+        const: 0
+
       nvidia,bpmp:
         $ref: /schemas/types.yaml#/definitions/phandle
         description:
           phandle of the node representing the BPMP
 
+    allOf:
+      - if:
+          properties:
+            compatible:
+              const: nvidia,tegra186-emc
+        then:
+          properties:
+            reg:
+              maxItems: 1
+
+      - if:
+          properties:
+            compatible:
+              const: nvidia,tegra194-emc
+        then:
+          properties:
+            reg:
+              minItems: 2
+
+      - if:
+          properties:
+            compatible:
+              const: nvidia,tegra234-emc
+        then:
+          properties:
+            reg:
+              minItems: 2
+
+    additionalProperties: false
+
+    required:
+      - compatible
+      - reg
+      - interrupts
+      - clocks
+      - clock-names
+      - "#interconnect-cells"
+      - nvidia,bpmp
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          const: nvidia,tegra186-mc
+    then:
+      properties:
+        reg:
+          maxItems: 1
+
+  - if:
+      properties:
+        compatible:
+          const: nvidia,tegra194-mc
+    then:
+      properties:
+        reg:
+          minItems: 3
+
+  - if:
+      properties:
+        compatible:
+          const: nvidia,tegra234-mc
+    then:
+      properties:
+        reg:
+          minItems: 3
+
+additionalProperties: false
+
 required:
   - compatible
   - reg
@@ -90,8 +171,6 @@ required:
   - "#address-cells"
   - "#size-cells"
 
-additionalProperties: false
-
 examples:
   - |
     #include <dt-bindings/clock/tegra186-clock.h>
@@ -124,12 +203,9 @@ examples:
                 clocks = <&bpmp TEGRA186_CLK_EMC>;
                 clock-names = "emc";
 
+                #interconnect-cells = <0>;
+
                 nvidia,bpmp = <&bpmp>;
             };
         };
     };
-
-    bpmp: bpmp {
-        compatible = "nvidia,tegra186-bpmp";
-        #clock-cells = <1>;
-    };
diff --git a/dts/Bindings/memory-controllers/renesas,rpc-if.yaml b/dts/Bindings/memory-controllers/renesas,rpc-if.yaml
index 9da80e8f24..294f103642 100644
--- a/dts/Bindings/memory-controllers/renesas,rpc-if.yaml
+++ b/dts/Bindings/memory-controllers/renesas,rpc-if.yaml
@@ -24,17 +24,23 @@ allOf:
 
 properties:
   compatible:
-    items:
-      - enum:
-          - renesas,r8a774a1-rpc-if       # RZ/G2M
-          - renesas,r8a774b1-rpc-if       # RZ/G2N
-          - renesas,r8a774c0-rpc-if       # RZ/G2E
-          - renesas,r8a774e1-rpc-if       # RZ/G2H
-          - renesas,r8a77970-rpc-if       # R-Car V3M
-          - renesas,r8a77980-rpc-if       # R-Car V3H
-          - renesas,r8a77995-rpc-if       # R-Car D3
-          - renesas,r8a779a0-rpc-if       # R-Car V3U
-      - const: renesas,rcar-gen3-rpc-if   # a generic R-Car gen3 or RZ/G2 device
+    oneOf:
+      - items:
+          - enum:
+              - renesas,r8a774a1-rpc-if       # RZ/G2M
+              - renesas,r8a774b1-rpc-if       # RZ/G2N
+              - renesas,r8a774c0-rpc-if       # RZ/G2E
+              - renesas,r8a774e1-rpc-if       # RZ/G2H
+              - renesas,r8a77970-rpc-if       # R-Car V3M
+              - renesas,r8a77980-rpc-if       # R-Car V3H
+              - renesas,r8a77995-rpc-if       # R-Car D3
+              - renesas,r8a779a0-rpc-if       # R-Car V3U
+          - const: renesas,rcar-gen3-rpc-if   # a generic R-Car gen3 or RZ/G2{E,H,M,N} device
+
+      - items:
+          - enum:
+              - renesas,r9a07g044-rpc-if      # RZ/G2{L,LC}
+          - const: renesas,rzg2l-rpc-if       # RZ/G2L family
 
   reg:
     items:
@@ -48,7 +54,9 @@ properties:
       - const: dirmap
       - const: wbuf
 
-  clocks:
+  clocks: true
+
+  interrupts:
     maxItems: 1
 
   power-domains:
@@ -67,8 +75,6 @@ patternProperties:
             - cfi-flash
             - jedec,spi-nor
 
-unevaluatedProperties: false
-
 required:
   - compatible
   - reg
@@ -79,6 +85,26 @@ required:
   - '#address-cells'
   - '#size-cells'
 
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - renesas,rzg2l-rpc-if
+then:
+  properties:
+    clocks:
+      items:
+        - description: SPI Multi IO Register access clock (SPI_CLK2)
+        - description: SPI Multi IO Main clock (SPI_CLK).
+
+else:
+  properties:
+    clocks:
+      maxItems: 1
+
+unevaluatedProperties: false
+
 examples:
   - |
     #include <dt-bindings/clock/renesas-cpg-mssr.h>
diff --git a/dts/Bindings/memory-controllers/synopsys,ddrc-ecc.yaml b/dts/Bindings/memory-controllers/synopsys,ddrc-ecc.yaml
index a245884746..fb7ae38a9c 100644
--- a/dts/Bindings/memory-controllers/synopsys,ddrc-ecc.yaml
+++ b/dts/Bindings/memory-controllers/synopsys,ddrc-ecc.yaml
@@ -26,6 +26,7 @@ properties:
     enum:
       - xlnx,zynq-ddrc-a05
       - xlnx,zynqmp-ddrc-2.40a
+      - snps,ddrc-3.80a
 
   interrupts:
     maxItems: 1
diff --git a/dts/Bindings/memory-controllers/ti,gpmc.yaml b/dts/Bindings/memory-controllers/ti,gpmc.yaml
index 25b42d68f9..e188a4bf75 100644
--- a/dts/Bindings/memory-controllers/ti,gpmc.yaml
+++ b/dts/Bindings/memory-controllers/ti,gpmc.yaml
@@ -23,13 +23,20 @@ properties:
     items:
       - enum:
           - ti,am3352-gpmc
+          - ti,am64-gpmc
           - ti,omap2420-gpmc
           - ti,omap2430-gpmc
           - ti,omap3430-gpmc
           - ti,omap4430-gpmc
 
   reg:
-    maxItems: 1
+    minItems: 1
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: cfg
+      - const: data
 
   interrupts:
     maxItems: 1
@@ -44,6 +51,9 @@ properties:
     items:
       - const: fck
 
+  power-domains:
+    maxItems: 1
+
   dmas:
     items:
       - description: DMA channel for GPMC NAND prefetch
@@ -119,11 +129,8 @@ patternProperties:
       The child device node represents the device connected to the GPMC
       bus. The device can be a NAND chip, SRAM device, NOR device
       or an ASIC.
+    $ref: "ti,gpmc-child.yaml"
 
-    allOf:
-      - $ref: "ti,gpmc-child.yaml"
-
-    unevaluatedProperties: false
 
 required:
   - compatible
@@ -133,6 +140,17 @@ required:
   - "#address-cells"
   - "#size-cells"
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: ti,am64-gpmc
+    then:
+      required:
+        - reg-names
+        - power-domains
+
 additionalProperties: false
 
 examples:
diff --git a/dts/Bindings/mfd/bd9571mwv.txt b/dts/Bindings/mfd/bd9571mwv.txt
deleted file mode 100644
index 1d6413e96c..0000000000
--- a/dts/Bindings/mfd/bd9571mwv.txt
+++ /dev/null
@@ -1,69 +0,0 @@
-* ROHM BD9571MWV/BD9574MWF Power Management Integrated Circuit (PMIC) bindings
-
-Required properties:
- - compatible		: Should be "rohm,bd9571mwv" or "rohm,bd9574mwf".
- - reg			: I2C slave address.
- - interrupts		: The interrupt line the device is connected to.
- - interrupt-controller	: Marks the device node as an interrupt controller.
- - #interrupt-cells	: The number of cells to describe an IRQ, should be 2.
-			    The first cell is the IRQ number.
-			    The second cell is the flags, encoded as trigger
-			    masks from ../interrupt-controller/interrupts.txt.
- - gpio-controller      : Marks the device node as a GPIO Controller.
- - #gpio-cells          : Should be two.  The first cell is the pin number and
-                            the second cell is used to specify flags.
-                            See ../gpio/gpio.txt for more information.
- - regulators:          : List of child nodes that specify the regulator
-                            initialization data. Child nodes must be named
-                            after their hardware counterparts:
-			     - vd09
-			     - vd18
-			     - vd25
-			     - vd33
-			     - dvfs
-			    Each child node is defined using the standard
-			    binding for regulators.
-
-Optional properties:
-  - rohm,ddr-backup-power : Value to use for DDR-Backup Power (default 0).
-			    This is a bitmask that specifies which DDR power
-			    rails need to be kept powered when backup mode is
-			    entered, for system suspend:
-			      - bit 0: DDR0
-			      - bit 1: DDR1
-			      - bit 2: DDR0C
-			      - bit 3: DDR1C
-			    These bits match the KEEPON_DDR* bits in the
-			    documentation for the "BKUP Mode Cnt" register.
-  - rohm,rstbmode-level: The RSTB signal is configured for level mode, to
-			 accommodate a toggle power switch (the RSTBMODE pin is
-			 strapped low).
-  - rohm,rstbmode-pulse: The RSTB signal is configured for pulse mode, to
-			 accommodate a momentary power switch (the RSTBMODE pin
-			 is strapped high).
-			 The two properties above are mutually exclusive.
-
-Example:
-
-	pmic: pmic@30 {
-		compatible = "rohm,bd9571mwv";
-		reg = <0x30>;
-		interrupt-parent = <&gpio2>;
-		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		rohm,ddr-backup-power = <0xf>;
-		rohm,rstbmode-pulse;
-
-		regulators {
-			dvfs: dvfs {
-				regulator-name = "dvfs";
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <1030000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-		};
-	};
diff --git a/dts/Bindings/mfd/brcm,twd.yaml b/dts/Bindings/mfd/brcm,twd.yaml
new file mode 100644
index 0000000000..634526f790
--- /dev/null
+++ b/dts/Bindings/mfd/brcm,twd.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/brcm,twd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom's Timer-Watchdog (aka TWD)
+
+maintainers:
+  - Rafał Miłecki <rafal@milecki.pl>
+
+description: |
+  Broadcom has a Timer-Watchdog block used in multiple SoCs (e.g., BCM4908,
+  BCM63xx, BCM7038). There are few variants available (they differ slightly in
+  registers layout). This block consists of: timers, watchdog and optionally a
+  software reset handler.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - brcm,bcm4908-twd
+          - brcm,bcm7038-twd
+      - const: simple-mfd
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  ranges: true
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+patternProperties:
+  '^watchdog@[a-f0-9]+$':
+    $ref: /schemas/watchdog/brcm,bcm7038-wdt.yaml
+
+additionalProperties: false
+
+required:
+  - reg
+
+examples:
+  - |
+    timer-mfd@ff800400 {
+        compatible = "brcm,bcm4908-twd", "simple-mfd", "syscon";
+        reg = <0xff800400 0x4c>;
+        ranges = <0x00000000 0xff800400 0x4c>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        watchdog@28 {
+            compatible = "brcm,bcm7038-wdt";
+            reg = <0x28 0x8>;
+        };
+    };
diff --git a/dts/Bindings/mfd/cirrus,madera.yaml b/dts/Bindings/mfd/cirrus,madera.yaml
index 499c62c04d..68c75a517c 100644
--- a/dts/Bindings/mfd/cirrus,madera.yaml
+++ b/dts/Bindings/mfd/cirrus,madera.yaml
@@ -221,7 +221,6 @@ required:
   - '#gpio-cells'
   - interrupt-controller
   - '#interrupt-cells'
-  - interrupt-parent
   - interrupts
   - AVDD-supply
   - DBVDD1-supply
@@ -246,8 +245,7 @@ examples:
 
             interrupt-controller;
             #interrupt-cells = <2>;
-            interrupts = <&host_irq1>;
-            interrupt-parent = <&gic>;
+            interrupts = <4 1 0>;
 
             gpio-controller;
             #gpio-cells = <2>;
diff --git a/dts/Bindings/mfd/da9063.txt b/dts/Bindings/mfd/da9063.txt
index 8da879935c..91b79a21d4 100644
--- a/dts/Bindings/mfd/da9063.txt
+++ b/dts/Bindings/mfd/da9063.txt
@@ -1,6 +1,6 @@
 * Dialog DA9063/DA9063L Power Management Integrated Circuit (PMIC)
 
-DA9093 consists of a large and varied group of sub-devices (I2C Only):
+DA9063 consists of a large and varied group of sub-devices (I2C Only):
 
 Device                   Supply Names    Description
 ------                   ------------    -----------
diff --git a/dts/Bindings/mfd/google,cros-ec.yaml b/dts/Bindings/mfd/google,cros-ec.yaml
index d793dd0316..d1f53bd449 100644
--- a/dts/Bindings/mfd/google,cros-ec.yaml
+++ b/dts/Bindings/mfd/google,cros-ec.yaml
@@ -8,7 +8,6 @@ title: ChromeOS Embedded Controller
 
 maintainers:
   - Benson Leung <bleung@chromium.org>
-  - Enric Balletbo i Serra <enric.balletbo@collabora.com>
   - Guenter Roeck <groeck@chromium.org>
 
 description:
@@ -59,7 +58,7 @@ properties:
       whether this nvram is present or not.
     type: boolean
 
-  mtk,rpmsg-name:
+  mediatek,rpmsg-name:
     description:
       Must be defined if the cros-ec is a rpmsg device for a Mediatek
       ARM Cortex M4 Co-processor. Contains the name pf the rpmsg
diff --git a/dts/Bindings/mfd/max77686.txt b/dts/Bindings/mfd/max77686.txt
deleted file mode 100644
index 4447d07489..0000000000
--- a/dts/Bindings/mfd/max77686.txt
+++ /dev/null
@@ -1,26 +0,0 @@
-Maxim MAX77686 multi-function device
-
-MAX77686 is a Multifunction device with PMIC, RTC and Charger on chip. It is
-interfaced to host controller using i2c interface. PMIC and Charger submodules
-are addressed using same i2c slave address whereas RTC submodule uses
-different i2c slave address,presently for which we are statically creating i2c
-client while probing.This document describes the binding for mfd device and
-PMIC submodule.
-
-Bindings for the built-in 32k clock generator block and
-regulators are defined in ../clk/maxim,max77686.txt and
-../regulator/max77686.txt respectively.
-
-Required properties:
-- compatible : Must be "maxim,max77686";
-- reg : Specifies the i2c slave address of PMIC block.
-- interrupts : This i2c device has an IRQ line connected to the main SoC.
-
-Example:
-
-	max77686: pmic@9 {
-		compatible = "maxim,max77686";
-		interrupt-parent = <&wakeup_eint>;
-		interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
-		reg = <0x09>;
-	};
diff --git a/dts/Bindings/mfd/maxim,max77686.yaml b/dts/Bindings/mfd/maxim,max77686.yaml
new file mode 100644
index 0000000000..859655a789
--- /dev/null
+++ b/dts/Bindings/mfd/maxim,max77686.yaml
@@ -0,0 +1,132 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/maxim,max77686.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX77686 Power Management IC
+
+maintainers:
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+
+description: |
+  This is a part of device tree bindings for Maxim MAX77686 Power Management
+  Integrated Circuit (PMIC).
+
+  The Maxim MAX77686 is a Power Management IC which includes voltage and
+  current regulators, RTC and clock outputs.
+
+  The MAX77686 provides three 32.768khz clock outputs that can be controlled
+  (gated/ungated) over I2C.  The clock IDs are defined as preprocessor macros
+  in dt-bindings/clock/maxim,max77686.h.
+
+properties:
+  compatible:
+    const: maxim,max77686
+
+  '#clock-cells':
+    const: 1
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  voltage-regulators:
+    $ref: ../regulator/maxim,max77686.yaml
+    description:
+      List of child nodes that specify the regulators.
+
+  wakeup-source: true
+
+required:
+  - compatible
+  - '#clock-cells'
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        max77686: pmic@9 {
+            compatible = "maxim,max77686";
+            reg = <0x09>;
+
+            interrupt-parent = <&gpx0>;
+            interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+            pinctrl-0 = <&max77686_irq>;
+            pinctrl-names = "default";
+            wakeup-source;
+            #clock-cells = <1>;
+
+            voltage-regulators {
+                LDO1 {
+                    regulator-name = "VALIVE_1.0V_AP";
+                    regulator-min-microvolt = <1000000>;
+                    regulator-max-microvolt = <1000000>;
+                    regulator-always-on;
+                };
+
+                LDO2 {
+                    regulator-name = "VM1M2_1.2V_AP";
+                    regulator-min-microvolt = <1200000>;
+                    regulator-max-microvolt = <1200000>;
+                    regulator-always-on;
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                    };
+                };
+
+                // ...
+
+                LDO22 {
+                    regulator-name = "VMEM_VDD_2.8V";
+                    regulator-min-microvolt = <2800000>;
+                    regulator-max-microvolt = <2800000>;
+                    maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
+                };
+
+                // ...
+
+                BUCK1 {
+                    regulator-name = "VDD_MIF";
+                    regulator-min-microvolt = <850000>;
+                    regulator-max-microvolt = <1100000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+
+                BUCK2 {
+                    regulator-name = "VDD_ARM";
+                    regulator-min-microvolt = <850000>;
+                    regulator-max-microvolt = <1500000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                    };
+                };
+
+                // ...
+
+                BUCK9 {
+                    regulator-name = "CAM_ISP_CORE_1.2V";
+                    regulator-min-microvolt = <1000000>;
+                    regulator-max-microvolt = <1200000>;
+                    maxim,ena-gpios = <&gpm0 3 GPIO_ACTIVE_HIGH>;
+                };
+            };
+        };
+    };
diff --git a/dts/Bindings/mfd/rohm,bd70528-pmic.txt b/dts/Bindings/mfd/rohm,bd70528-pmic.txt
deleted file mode 100644
index 386eec06cf..0000000000
--- a/dts/Bindings/mfd/rohm,bd70528-pmic.txt
+++ /dev/null
@@ -1,102 +0,0 @@
-* ROHM BD70528 Power Management Integrated Circuit bindings
-
-BD70528MWV is an ultra-low quiescent current general purpose, single-chip,
-power management IC for battery-powered portable devices. The IC
-integrates 3 ultra-low current consumption buck converters, 3 LDOs and 2
-LED Drivers. Also included are 4 GPIOs, a real-time clock (RTC), a 32kHz
-clock gate, high-accuracy VREF for use with an external ADC, flexible
-dual-input power path, 10 bit SAR ADC for battery temperature monitor and
-1S battery charger with scalable charge currents.
-
-Required properties:
- - compatible		: Should be "rohm,bd70528"
- - reg			: I2C slave address.
- - interrupts		: The interrupt line the device is connected to.
- - interrupt-controller	: To indicate BD70528 acts as an interrupt controller.
- - #interrupt-cells	: Should be 2. Usage is compliant to the 2 cells
-			  variant of ../interrupt-controller/interrupts.txt
- - gpio-controller	: To indicate BD70528 acts as a GPIO controller.
- - #gpio-cells		: Should be 2. The first cell is the pin number and
-			  the second cell is used to specify flags. See
-			  ../gpio/gpio.txt for more information.
- - #clock-cells		: Should be 0.
- - regulators:		: List of child nodes that specify the regulators.
-			  Please see ../regulator/rohm,bd70528-regulator.txt
-
-Optional properties:
- - clock-output-names	: Should contain name for output clock.
-
-Example:
-/* External oscillator */
-osc: oscillator {
-	compatible = "fixed-clock";
-	#clock-cells = <1>;
-	clock-frequency  = <32768>;
-	clock-output-names = "osc";
-};
-
-pmic: pmic@4b {
-	compatible = "rohm,bd70528";
-	reg = <0x4b>;
-	interrupt-parent = <&gpio1>;
-	interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
-	clocks = <&osc 0>;
-	#clock-cells = <0>;
-	clock-output-names = "bd70528-32k-out";
-	#gpio-cells = <2>;
-	gpio-controller;
-	interrupt-controller;
-	#interrupt-cells = <2>;
-
-	regulators {
-		buck1: BUCK1 {
-			regulator-name = "buck1";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <3400000>;
-			regulator-boot-on;
-			regulator-ramp-delay = <125>;
-		};
-		buck2: BUCK2 {
-			regulator-name = "buck2";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-boot-on;
-			regulator-ramp-delay = <125>;
-		};
-		buck3: BUCK3 {
-			regulator-name = "buck3";
-			regulator-min-microvolt = <800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-boot-on;
-			regulator-ramp-delay = <250>;
-		};
-		ldo1: LDO1 {
-			regulator-name = "ldo1";
-			regulator-min-microvolt = <1650000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-boot-on;
-		};
-		ldo2: LDO2 {
-			regulator-name = "ldo2";
-			regulator-min-microvolt = <1650000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-boot-on;
-		};
-
-		ldo3: LDO3 {
-			regulator-name = "ldo3";
-			regulator-min-microvolt = <1650000>;
-			regulator-max-microvolt = <3300000>;
-		};
-		led_ldo1: LED_LDO1 {
-			regulator-name = "led_ldo1";
-			regulator-min-microvolt = <200000>;
-			regulator-max-microvolt = <300000>;
-		};
-		led_ldo2: LED_LDO2 {
-			regulator-name = "led_ldo2";
-			regulator-min-microvolt = <200000>;
-			regulator-max-microvolt = <300000>;
-		};
-	};
-};
diff --git a/dts/Bindings/mfd/rohm,bd9571mwv.yaml b/dts/Bindings/mfd/rohm,bd9571mwv.yaml
new file mode 100644
index 0000000000..89f9efee46
--- /dev/null
+++ b/dts/Bindings/mfd/rohm,bd9571mwv.yaml
@@ -0,0 +1,127 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/rohm,bd9571mwv.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROHM BD9571MWV/BD9574MWF Power Management Integrated Circuit (PMIC)
+
+maintainers:
+  - Marek Vasut <marek.vasut@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - rohm,bd9571mwv
+      - rohm,bd9574mwf
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+
+  rohm,ddr-backup-power:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0x0
+    maximum: 0xf
+    description: |
+      Value to use for DDR-Backup Power (default 0).
+      This is a bitmask that specifies which DDR power rails need to be kept
+      powered when backup mode is entered, for system suspend:
+        - bit 0: DDR0
+        - bit 1: DDR1
+        - bit 2: DDR0C
+        - bit 3: DDR1C
+      These bits match the KEEPON_DDR* bits in the documentation for the "BKUP
+      Mode Cnt" register.
+
+  rohm,rstbmode-level:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      The RSTB signal is configured for level mode, to accommodate a toggle
+      power switch (the RSTBMODE pin is strapped low).
+
+  rohm,rstbmode-pulse:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      The RSTB signal is configured for pulse mode, to accommodate a momentary
+      power switch (the RSTBMODE pin is strapped high).
+
+  regulators:
+    type: object
+    description:
+      List of child nodes that specify the regulator initialization data.
+      Child nodes must be named after their hardware counterparts.
+
+    patternProperties:
+      "^(vd09|vd18|vd25|vd33|dvfs)$":
+        type: object
+        $ref: ../regulator/regulator.yaml#
+
+        properties:
+          regulator-name:
+            pattern: "^(vd09|vd18|vd25|vd33|dvfs)$"
+
+        unevaluatedProperties: false
+
+    additionalProperties: false
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - '#interrupt-cells'
+  - gpio-controller
+  - '#gpio-cells'
+
+oneOf:
+  - required:
+      - rohm,rstbmode-level
+  - required:
+      - rohm,rstbmode-pulse
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          pmic: pmic@30 {
+                  compatible = "rohm,bd9571mwv";
+                  reg = <0x30>;
+                  interrupt-parent = <&gpio2>;
+                  interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+                  interrupt-controller;
+                  #interrupt-cells = <2>;
+                  gpio-controller;
+                  #gpio-cells = <2>;
+                  rohm,ddr-backup-power = <0xf>;
+                  rohm,rstbmode-pulse;
+
+                  regulators {
+                          dvfs: dvfs {
+                                  regulator-name = "dvfs";
+                                  regulator-min-microvolt = <750000>;
+                                  regulator-max-microvolt = <1030000>;
+                                  regulator-boot-on;
+                                  regulator-always-on;
+                          };
+                  };
+          };
+    };
diff --git a/dts/Bindings/mfd/syscon.yaml b/dts/Bindings/mfd/syscon.yaml
index 5de16388a0..eeac1cbc5a 100644
--- a/dts/Bindings/mfd/syscon.yaml
+++ b/dts/Bindings/mfd/syscon.yaml
@@ -39,6 +39,7 @@ properties:
               - allwinner,sun8i-v3s-system-controller
               - allwinner,sun50i-a64-system-controller
               - brcm,cru-clkset
+              - freecom,fsg-cs2-system-controller
               - hisilicon,dsa-subctrl
               - hisilicon,hi6220-sramctrl
               - hisilicon,pcie-sas-subctrl
@@ -57,6 +58,7 @@ properties:
               - samsung,exynos4-sysreg
               - samsung,exynos5-sysreg
               - samsung,exynos5433-sysreg
+              - samsung,exynos850-sysreg
               - samsung,exynosautov9-sysreg
 
           - const: syscon
diff --git a/dts/Bindings/mips/loongson/ls2k-reset.yaml b/dts/Bindings/mips/loongson/ls2k-reset.yaml
new file mode 100644
index 0000000000..20b5836efd
--- /dev/null
+++ b/dts/Bindings/mips/loongson/ls2k-reset.yaml
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/mips/loongson/ls2k-reset.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Loongson 2K1000 PM Controller
+
+maintainers:
+  - Qing Zhang <zhangqing@loongson.cn>
+
+description: |
+  This controller can be found in Loongson-2K1000 Soc systems.
+
+properties:
+  compatible:
+    const: loongson,ls2k-pm
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+        pm: reset-controller@1fe07000 {
+            compatible = "loongson,ls2k-pm";
+            reg = <0 0x1fe07000 0 0x422>;
+        };
+    };
+...
diff --git a/dts/Bindings/misc/nvidia,tegra186-misc.txt b/dts/Bindings/misc/nvidia,tegra186-misc.txt
deleted file mode 100644
index 43d777ed83..0000000000
--- a/dts/Bindings/misc/nvidia,tegra186-misc.txt
+++ /dev/null
@@ -1,14 +0,0 @@
-NVIDIA Tegra186 (and later) MISC register block
-
-The MISC register block found on Tegra186 and later SoCs contains registers
-that can be used to identify a given chip and various strapping options.
-
-Required properties:
-- compatible: Must be:
-  - Tegra186: "nvidia,tegra186-misc"
-  - Tegra194: "nvidia,tegra194-misc"
-  - Tegra234: "nvidia,tegra234-misc"
-- reg: Should contain 2 entries: The first entry gives the physical address
-       and length of the register region which contains revision and debug
-       features. The second entry specifies the physical address and length
-       of the register region indicating the strapping options.
diff --git a/dts/Bindings/misc/nvidia,tegra186-misc.yaml b/dts/Bindings/misc/nvidia,tegra186-misc.yaml
new file mode 100644
index 0000000000..cacb845868
--- /dev/null
+++ b/dts/Bindings/misc/nvidia,tegra186-misc.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/misc/nvidia,tegra186-misc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra186 (and later) MISC register block
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+description: The MISC register block found on Tegra186 and later SoCs contains
+  registers that can be used to identify a given chip and various strapping
+  options.
+
+properties:
+  compatible:
+    enum:
+      - nvidia,tegra186-misc
+      - nvidia,tegra194-misc
+      - nvidia,tegra234-misc
+
+  reg:
+    items:
+      - description: physical address and length of the registers which
+          contain revision and debug features
+      - description: physical address and length of the registers which
+          indicate strapping options
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    misc@100000 {
+        compatible = "nvidia,tegra186-misc";
+        reg = <0x00100000 0xf000>,
+              <0x0010f000 0x1000>;
+    };
diff --git a/dts/Bindings/misc/nvidia,tegra20-apbmisc.txt b/dts/Bindings/misc/nvidia,tegra20-apbmisc.txt
deleted file mode 100644
index 83f6a251ba..0000000000
--- a/dts/Bindings/misc/nvidia,tegra20-apbmisc.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-NVIDIA Tegra APBMISC block
-
-Required properties:
-- compatible: Must be:
-  - Tegra20: "nvidia,tegra20-apbmisc"
-  - Tegra30: "nvidia,tegra30-apbmisc", "nvidia,tegra20-apbmisc"
-  - Tegra114: "nvidia,tegra114-apbmisc", "nvidia,tegra20-apbmisc"
-  - Tegra124: "nvidia,tegra124-apbmisc", "nvidia,tegra20-apbmisc"
-  - Tegra132: "nvidia,tegra124-apbmisc", "nvidia,tegra20-apbmisc"
-  - Tegra210: "nvidia,tegra210-apbmisc", "nvidia,tegra20-apbmisc"
-- reg: Should contain 2 entries: the first entry gives the physical address
-       and length of the registers which contain revision and debug features.
-       The second entry gives the physical address and length of the
-       registers indicating the strapping options.
-
-Optional properties:
-- nvidia,long-ram-code: If present, the RAM code is long (4 bit). If not, short (2 bit).
diff --git a/dts/Bindings/misc/nvidia,tegra20-apbmisc.yaml b/dts/Bindings/misc/nvidia,tegra20-apbmisc.yaml
new file mode 100644
index 0000000000..6f504fa740
--- /dev/null
+++ b/dts/Bindings/misc/nvidia,tegra20-apbmisc.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/misc/nvidia,tegra20-apbmisc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra APBMISC block
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - nvidia,tegra210-apbmisc
+              - nvidia,tegra124-apbmisc
+              - nvidia,tegra114-apbmisc
+              - nvidia,tegra30-apbmisc
+          - const: nvidia,tegra20-apbmisc
+
+      - items:
+          - const: nvidia,tegra20-apbmisc
+
+  reg:
+    items:
+      - description: physical address and length of the registers which
+          contain revision and debug features
+      - description: physical address and length of the registers which
+          indicate strapping options
+
+  nvidia,long-ram-code:
+    description: If present, the RAM code is long (4 bit). If not, short
+      (2 bit).
+    type: boolean
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    apbmisc@70000800 {
+        compatible = "nvidia,tegra20-apbmisc";
+        reg = <0x70000800 0x64>, /* Chip revision */
+              <0x70000008 0x04>; /* Strapping options */
+    };
diff --git a/dts/Bindings/mmc/arasan,sdhci.yaml b/dts/Bindings/mmc/arasan,sdhci.yaml
index de6f076e0e..83be9e93d2 100644
--- a/dts/Bindings/mmc/arasan,sdhci.yaml
+++ b/dts/Bindings/mmc/arasan,sdhci.yaml
@@ -118,6 +118,9 @@ properties:
   phy-names:
     const: phy_arasan
 
+  resets:
+    maxItems: 1
+
   arasan,soc-ctl-syscon:
     $ref: /schemas/types.yaml#/definitions/phandle
     description:
diff --git a/dts/Bindings/mmc/arm,pl18x.yaml b/dts/Bindings/mmc/arm,pl18x.yaml
index 47595cb483..1e69a5a424 100644
--- a/dts/Bindings/mmc/arm,pl18x.yaml
+++ b/dts/Bindings/mmc/arm,pl18x.yaml
@@ -53,6 +53,12 @@ properties:
         items:
           - const: arm,pl18x
           - const: arm,primecell
+      - description: Entry for STMicroelectronics variant of PL18x.
+          This dedicated compatible is used by bootloaders.
+        items:
+          - const: st,stm32-sdmmc2
+          - const: arm,pl18x
+          - const: arm,primecell
 
   clocks:
     description: One or two clocks, the "apb_pclk" and the "MCLK"
@@ -60,6 +66,18 @@ properties:
     minItems: 1
     maxItems: 2
 
+  dmas:
+    maxItems: 2
+
+  dma-names:
+    oneOf:
+      - items:
+          - const: tx
+          - const: rx
+      - items:
+          - const: rx
+          - const: tx
+
   power-domains: true
 
   resets:
@@ -167,6 +185,9 @@ examples:
       clock-names = "mclk", "apb_pclk";
     };
 
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
     mmc@80126000 {
       compatible = "arm,pl18x", "arm,primecell";
       reg = <0x80126000 0x1000>;
@@ -188,12 +209,12 @@ examples:
       vqmmc-supply = <&vmmci>;
     };
 
+  - |
     mmc@101f6000 {
       compatible = "arm,pl18x", "arm,primecell";
       reg = <0x101f6000 0x1000>;
       clocks = <&sdiclk>, <&pclksdi>;
       clock-names = "mclk", "apb_pclk";
-      interrupt-parent = <&vica>;
       interrupts = <22>;
       max-frequency = <400000>;
       bus-width = <4>;
@@ -208,12 +229,12 @@ examples:
       vmmc-supply = <&vmmc_regulator>;
     };
 
+  - |
     mmc@52007000 {
       compatible = "arm,pl18x", "arm,primecell";
       arm,primecell-periphid = <0x10153180>;
       reg = <0x52007000 0x1000>;
       interrupts = <49>;
-      interrupt-names = "cmd_irq";
       clocks = <&rcc 0>;
       clock-names = "apb_pclk";
       resets = <&rcc 1>;
diff --git a/dts/Bindings/mmc/brcm,sdhci-brcmstb.txt b/dts/Bindings/mmc/brcm,sdhci-brcmstb.txt
deleted file mode 100644
index ae20741845..0000000000
--- a/dts/Bindings/mmc/brcm,sdhci-brcmstb.txt
+++ /dev/null
@@ -1,53 +0,0 @@
-* BROADCOM BRCMSTB/BMIPS SDHCI Controller
-
-This file documents differences between the core properties in mmc.txt
-and the properties used by the sdhci-brcmstb driver.
-
-NOTE: The driver disables all UHS speed modes by default and depends
-on Device Tree properties to enable them for SoC/Board combinations
-that support them.
-
-Required properties:
-- compatible: should be one of the following
-  - "brcm,bcm7425-sdhci"
-  - "brcm,bcm7445-sdhci"
-  - "brcm,bcm7216-sdhci"
-
-Refer to clocks/clock-bindings.txt for generic clock consumer properties.
-
-Example:
-
-	sdhci@84b0000 {
-		sd-uhs-sdr50;
-		sd-uhs-ddr50;
-		sd-uhs-sdr104;
-		sdhci,auto-cmd12;
-		compatible = "brcm,bcm7216-sdhci",
-			   "brcm,bcm7445-sdhci",
-			   "brcm,sdhci-brcmstb";
-		reg = <0x84b0000 0x260 0x84b0300 0x200>;
-		reg-names = "host", "cfg";
-		interrupts = <0x0 0x26 0x4>;
-		interrupt-names = "sdio0_0";
-		clocks = <&scmi_clk 245>;
-		clock-names = "sw_sdio";
-	};
-
-	sdhci@84b1000 {
-		mmc-ddr-1_8v;
-		mmc-hs200-1_8v;
-		mmc-hs400-1_8v;
-		mmc-hs400-enhanced-strobe;
-		supports-cqe;
-		non-removable;
-		bus-width = <0x8>;
-		compatible = "brcm,bcm7216-sdhci",
-			   "brcm,bcm7445-sdhci",
-			   "brcm,sdhci-brcmstb";
-		reg = <0x84b1000 0x260 0x84b1300 0x200>;
-		reg-names = "host", "cfg";
-		interrupts = <0x0 0x27 0x4>;
-		interrupt-names = "sdio1_0";
-		clocks = <&scmi_clk 245>;
-		clock-names = "sw_sdio";
-	};
diff --git a/dts/Bindings/mmc/brcm,sdhci-brcmstb.yaml b/dts/Bindings/mmc/brcm,sdhci-brcmstb.yaml
new file mode 100644
index 0000000000..dccd5ad969
--- /dev/null
+++ b/dts/Bindings/mmc/brcm,sdhci-brcmstb.yaml
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/brcm,sdhci-brcmstb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BRCMSTB/BMIPS SDHCI Controller binding
+
+maintainers:
+  - Al Cooper <alcooperx@gmail.com>
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+allOf:
+  - $ref: mmc-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - brcm,bcm7216-sdhci
+          - const: brcm,bcm7445-sdhci
+          - const: brcm,sdhci-brcmstb
+      - items:
+          - enum:
+              - brcm,bcm7445-sdhci
+          - const: brcm,sdhci-brcmstb
+      - items:
+          - enum:
+              - brcm,bcm7425-sdhci
+          - const: brcm,sdhci-brcmstb
+
+  reg:
+    minItems: 2
+
+  reg-names:
+    items:
+      - const: host
+      - const: cfg
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description:
+      handle to core clock for the sdhci controller.
+
+  clock-names:
+    items:
+      - const: sw_sdio
+
+  sdhci,auto-cmd12:
+    type: boolean
+    description: Specifies that controller should use auto CMD12
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    mmc@84b0000 {
+      sd-uhs-sdr50;
+      sd-uhs-ddr50;
+      sd-uhs-sdr104;
+      sdhci,auto-cmd12;
+      compatible = "brcm,bcm7216-sdhci",
+                   "brcm,bcm7445-sdhci",
+                   "brcm,sdhci-brcmstb";
+      reg = <0x84b0000 0x260>, <0x84b0300 0x200>;
+      reg-names = "host", "cfg";
+      interrupts = <0x0 0x26 0x4>;
+      interrupt-names = "sdio0_0";
+      clocks = <&scmi_clk 245>;
+      clock-names = "sw_sdio";
+    };
+
+    mmc@84b1000 {
+      mmc-ddr-1_8v;
+      mmc-hs200-1_8v;
+      mmc-hs400-1_8v;
+      mmc-hs400-enhanced-strobe;
+      supports-cqe;
+      non-removable;
+      bus-width = <0x8>;
+      compatible = "brcm,bcm7216-sdhci",
+           "brcm,bcm7445-sdhci",
+            "brcm,sdhci-brcmstb";
+      reg = <0x84b1000 0x260>, <0x84b1300 0x200>;
+      reg-names = "host", "cfg";
+      interrupts = <0x0 0x27 0x4>;
+      interrupt-names = "sdio1_0";
+      clocks = <&scmi_clk 245>;
+      clock-names = "sw_sdio";
+    };
diff --git a/dts/Bindings/mmc/exynos-dw-mshc.txt b/dts/Bindings/mmc/exynos-dw-mshc.txt
index 0419a63f73..753e9d7d89 100644
--- a/dts/Bindings/mmc/exynos-dw-mshc.txt
+++ b/dts/Bindings/mmc/exynos-dw-mshc.txt
@@ -22,6 +22,8 @@ Required Properties:
 	  specific extensions.
 	- "samsung,exynos7-dw-mshc-smu": for controllers with Samsung Exynos7
 	  specific extensions having an SMU.
+	- "axis,artpec8-dw-mshc": for controllers with ARTPEC-8 specific
+	  extensions.
 
 * samsung,dw-mshc-ciu-div: Specifies the divider value for the card interface
   unit (ciu) clock. This property is applicable only for Exynos5 SoC's and
diff --git a/dts/Bindings/mmc/fsl-imx-esdhc.yaml b/dts/Bindings/mmc/fsl-imx-esdhc.yaml
index 19621a2f8b..17acbc665f 100644
--- a/dts/Bindings/mmc/fsl-imx-esdhc.yaml
+++ b/dts/Bindings/mmc/fsl-imx-esdhc.yaml
@@ -34,6 +34,7 @@ properties:
           - fsl,imx6ull-usdhc
           - fsl,imx7d-usdhc
           - fsl,imx7ulp-usdhc
+          - fsl,imxrt1050-usdhc
           - nxp,s32g2-usdhc
       - items:
           - enum:
@@ -44,6 +45,10 @@ properties:
               - fsl,imx8qm-usdhc
               - fsl,imx8qxp-usdhc
           - const: fsl,imx7d-usdhc
+      - items:
+          - enum:
+              - fsl,imx8ulp-usdhc
+          - const: fsl,imx8mm-usdhc
 
   reg:
     maxItems: 1
@@ -116,6 +121,9 @@ properties:
       - const: ahb
       - const: per
 
+  power-domains:
+    maxItems: 1
+
   pinctrl-names:
     oneOf:
       - minItems: 3
diff --git a/dts/Bindings/mmc/img-dw-mshc.txt b/dts/Bindings/mmc/img-dw-mshc.txt
deleted file mode 100644
index c54e577eea..0000000000
--- a/dts/Bindings/mmc/img-dw-mshc.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-* Imagination specific extensions to the Synopsys Designware Mobile Storage
-  Host Controller
-
-The Synopsys designware mobile storage host controller is used to interface
-a SoC with storage medium such as eMMC or SD/MMC cards. This file documents
-differences between the core Synopsys dw mshc controller properties described
-by synopsys-dw-mshc.txt and the properties used by the Imagination specific
-extensions to the Synopsys Designware Mobile Storage Host Controller.
-
-Required Properties:
-
-* compatible: should be
-	- "img,pistachio-dw-mshc": for Pistachio SoCs
-
-Example:
-
-	mmc@18142000 {
-		compatible = "img,pistachio-dw-mshc";
-		reg = <0x18142000 0x400>;
-		interrupts = <GIC_SHARED 39 IRQ_TYPE_LEVEL_HIGH>;
-
-		clocks = <&system_clk>, <&sdhost_clk>;
-		clock-names = "biu", "ciu";
-
-		fifo-depth = <0x20>;
-		bus-width = <4>;
-		disable-wp;
-	};
diff --git a/dts/Bindings/mmc/ingenic,mmc.yaml b/dts/Bindings/mmc/ingenic,mmc.yaml
index 01d5c6da0e..2d10aedf2e 100644
--- a/dts/Bindings/mmc/ingenic,mmc.yaml
+++ b/dts/Bindings/mmc/ingenic,mmc.yaml
@@ -39,14 +39,15 @@ properties:
     const: mmc
 
   dmas:
-    items:
-      - description: DMA controller phandle and request line for RX
-      - description: DMA controller phandle and request line for TX
+    minItems: 1
+    maxItems: 2
 
   dma-names:
-    items:
-      - const: rx
-      - const: tx
+    oneOf:
+      - items:
+          - const: rx
+          - const: tx
+      - const: tx-rx
 
 required:
   - compatible
@@ -80,3 +81,27 @@ examples:
              <&dma JZ4780_DMA_MSC0_TX 0xffffffff>;
       dma-names = "rx", "tx";
     };
+  - |
+    #include <dt-bindings/clock/ingenic,jz4780-cgu.h>
+    #include <dt-bindings/dma/jz4780-dma.h>
+    /*
+     * Alternative version of the example above,
+     * but using one single DMA channel for both
+     * TX and RX.
+     */
+    mmc1: mmc@13460000 {
+      compatible = "ingenic,jz4780-mmc";
+      reg = <0x13460000 0x1000>;
+
+      interrupt-parent = <&intc>;
+      interrupts = <36>;
+
+      clocks = <&cgu JZ4780_CLK_MSC1>;
+      clock-names = "mmc";
+
+      cap-sd-highspeed;
+      cap-mmc-highspeed;
+      cap-sdio-irq;
+      dmas = <&dma JZ4780_DMA_MSC1_TX JZ4780_DMA_MSC1_RX 0xffffffff>;
+      dma-names = "tx-rx";
+    };
diff --git a/dts/Bindings/mmc/mtk-sd.yaml b/dts/Bindings/mmc/mtk-sd.yaml
index 82768a8072..faf89b0c91 100644
--- a/dts/Bindings/mmc/mtk-sd.yaml
+++ b/dts/Bindings/mmc/mtk-sd.yaml
@@ -36,6 +36,9 @@ properties:
           - const: mediatek,mt8195-mmc
           - const: mediatek,mt8183-mmc
 
+  reg:
+    maxItems: 1
+
   clocks:
     description:
       Should contain phandle for the clock feeding the MMC controller.
@@ -62,6 +65,9 @@ properties:
       - const: axi_cg
       - const: ahb_cg
 
+  interrupts:
+    maxItems: 1
+
   pinctrl-names:
     items:
       - const: default
diff --git a/dts/Bindings/mmc/nvidia,tegra20-sdhci.txt b/dts/Bindings/mmc/nvidia,tegra20-sdhci.txt
deleted file mode 100644
index 96c0b1440c..0000000000
--- a/dts/Bindings/mmc/nvidia,tegra20-sdhci.txt
+++ /dev/null
@@ -1,143 +0,0 @@
-* NVIDIA Tegra Secure Digital Host Controller
-
-This controller on Tegra family SoCs provides an interface for MMC, SD,
-and SDIO types of memory cards.
-
-This file documents differences between the core properties described
-by mmc.txt and the properties used by the sdhci-tegra driver.
-
-Required properties:
-- compatible : should be one of:
-  - "nvidia,tegra20-sdhci": for Tegra20
-  - "nvidia,tegra30-sdhci": for Tegra30
-  - "nvidia,tegra114-sdhci": for Tegra114
-  - "nvidia,tegra124-sdhci": for Tegra124 and Tegra132
-  - "nvidia,tegra210-sdhci": for Tegra210
-  - "nvidia,tegra186-sdhci": for Tegra186
-  - "nvidia,tegra194-sdhci": for Tegra194
-- clocks: For Tegra210, Tegra186 and Tegra194 must contain two entries.
-	  One for the module clock and one for the timeout clock.
-	  For all other Tegra devices, must contain a single entry for
-	  the module clock. See ../clocks/clock-bindings.txt for details.
-- clock-names: For Tegra210, Tegra186 and Tegra194 must contain the
-	       strings 'sdhci' and 'tmclk' to represent the module and
-	       the timeout clocks, respectively.
-	       For all other Tegra devices must contain the string 'sdhci'
-	       to represent the module clock.
-- resets : Must contain an entry for each entry in reset-names.
-  See ../reset/reset.txt for details.
-- reset-names : Must include the following entries:
-  - sdhci
-
-Optional properties:
-- power-gpios : Specify GPIOs for power control
-
-Example:
-
-sdhci@c8000200 {
-	compatible = "nvidia,tegra20-sdhci";
-	reg = <0xc8000200 0x200>;
-	interrupts = <47>;
-	clocks = <&tegra_car 14>;
-	resets = <&tegra_car 14>;
-	reset-names = "sdhci";
-	cd-gpios = <&gpio 69 0>; /* gpio PI5 */
-	wp-gpios = <&gpio 57 0>; /* gpio PH1 */
-	power-gpios = <&gpio 155 0>; /* gpio PT3 */
-	bus-width = <8>;
-};
-
-Optional properties for Tegra210, Tegra186 and Tegra194:
-- pinctrl-names, pinctrl-0, pinctrl-1 : Specify pad voltage
-  configurations. Valid pinctrl-names are "sdmmc-3v3" and "sdmmc-1v8"
-  for controllers supporting multiple voltage levels. The order of names
-  should correspond to the pin configuration states in pinctrl-0 and
-  pinctrl-1.
-- pinctrl-names : "sdmmc-3v3-drv" and "sdmmc-1v8-drv" are applicable for
-  Tegra210 where pad config registers are in the pinmux register domain
-  for pull-up-strength and pull-down-strength values configuration when
-  using pads at 3V3 and 1V8 levels.
-- nvidia,only-1-8-v : The presence of this property indicates that the
-  controller operates at a 1.8 V fixed I/O voltage.
-- nvidia,pad-autocal-pull-up-offset-3v3,
-  nvidia,pad-autocal-pull-down-offset-3v3 : Specify drive strength
-  calibration offsets for 3.3 V signaling modes.
-- nvidia,pad-autocal-pull-up-offset-1v8,
-  nvidia,pad-autocal-pull-down-offset-1v8 : Specify drive strength
-  calibration offsets for 1.8 V signaling modes.
-- nvidia,pad-autocal-pull-up-offset-3v3-timeout,
-  nvidia,pad-autocal-pull-down-offset-3v3-timeout : Specify drive
-  strength used as a fallback in case the automatic calibration times
-  out on a 3.3 V signaling mode.
-- nvidia,pad-autocal-pull-up-offset-1v8-timeout,
-  nvidia,pad-autocal-pull-down-offset-1v8-timeout : Specify drive
-  strength used as a fallback in case the automatic calibration times
-  out on a 1.8 V signaling mode.
-- nvidia,pad-autocal-pull-up-offset-sdr104,
-  nvidia,pad-autocal-pull-down-offset-sdr104 : Specify drive strength
-  calibration offsets for SDR104 mode.
-- nvidia,pad-autocal-pull-up-offset-hs400,
-  nvidia,pad-autocal-pull-down-offset-hs400 : Specify drive strength
-  calibration offsets for HS400 mode.
-- nvidia,default-tap : Specify the default inbound sampling clock
-  trimmer value for non-tunable modes.
-- nvidia,default-trim : Specify the default outbound clock trimmer
-  value.
-- nvidia,dqs-trim : Specify DQS trim value for HS400 timing
-
-  Notes on the pad calibration pull up and pulldown offset values:
-    - The property values are drive codes which are programmed into the
-      PD_OFFSET and PU_OFFSET sections of the
-      SDHCI_TEGRA_AUTO_CAL_CONFIG register.
-    - A higher value corresponds to higher drive strength. Please refer
-      to the reference manual of the SoC for correct values.
-    - The SDR104 and HS400 timing specific values are used in
-      corresponding modes if specified.
-
-  Notes on tap and trim values:
-    - The values are used for compensating trace length differences
-      by adjusting the sampling point.
-    - The values are programmed to the Vendor Clock Control Register.
-      Please refer to the reference manual of the SoC for correct
-      values.
-    - The DQS trim values are only used on controllers which support
-      HS400 timing. Only SDMMC4 on Tegra210 and Tegra 186 supports
-      HS400.
-
-Example:
-sdhci@700b0000 {
-	compatible = "nvidia,tegra124-sdhci";
-	reg = <0x0 0x700b0000 0x0 0x200>;
-	interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
-	clocks = <&tegra_car TEGRA210_CLK_SDMMC1>;
-	clock-names = "sdhci";
-	resets = <&tegra_car 14>;
-	reset-names = "sdhci";
-	pinctrl-names = "sdmmc-3v3", "sdmmc-1v8";
-	pinctrl-0 = <&sdmmc1_3v3>;
-	pinctrl-1 = <&sdmmc1_1v8>;
-	nvidia,pad-autocal-pull-up-offset-3v3 = <0x00>;
-	nvidia,pad-autocal-pull-down-offset-3v3 = <0x7d>;
-	nvidia,pad-autocal-pull-up-offset-1v8 = <0x7b>;
-	nvidia,pad-autocal-pull-down-offset-1v8 = <0x7b>;
-	status = "disabled";
-};
-
-sdhci@700b0000 {
-	compatible = "nvidia,tegra210-sdhci";
-	reg = <0x0 0x700b0000 0x0 0x200>;
-	interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
-	clocks = <&tegra_car TEGRA210_CLK_SDMMC1>,
-		 <&tegra_car TEGRA210_CLK_SDMMC_LEGACY>;
-	clock-names = "sdhci", "tmclk";
-	resets = <&tegra_car 14>;
-	reset-names = "sdhci";
-	pinctrl-names = "sdmmc-3v3", "sdmmc-1v8";
-	pinctrl-0 = <&sdmmc1_3v3>;
-	pinctrl-1 = <&sdmmc1_1v8>;
-	nvidia,pad-autocal-pull-up-offset-3v3 = <0x00>;
-	nvidia,pad-autocal-pull-down-offset-3v3 = <0x7d>;
-	nvidia,pad-autocal-pull-up-offset-1v8 = <0x7b>;
-	nvidia,pad-autocal-pull-down-offset-1v8 = <0x7b>;
-	status = "disabled";
-};
diff --git a/dts/Bindings/mmc/nvidia,tegra20-sdhci.yaml b/dts/Bindings/mmc/nvidia,tegra20-sdhci.yaml
new file mode 100644
index 0000000000..ce64b34983
--- /dev/null
+++ b/dts/Bindings/mmc/nvidia,tegra20-sdhci.yaml
@@ -0,0 +1,317 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/nvidia,tegra20-sdhci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra Secure Digital Host Controller
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+description: |
+  This controller on Tegra family SoCs provides an interface for MMC, SD, and
+  SDIO types of memory cards.
+
+  This file documents differences between the core properties described by
+  mmc-controller.yaml and the properties for the Tegra SDHCI controller.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - nvidia,tegra20-sdhci
+          - nvidia,tegra30-sdhci
+          - nvidia,tegra114-sdhci
+          - nvidia,tegra124-sdhci
+          - nvidia,tegra210-sdhci
+          - nvidia,tegra186-sdhci
+          - nvidia,tegra194-sdhci
+
+      - items:
+          - const: nvidia,tegra132-sdhci
+          - const: nvidia,tegra124-sdhci
+
+      - items:
+          - enum:
+              - nvidia,tegra194-sdhci
+              - nvidia,tegra234-sdhci
+          - const: nvidia,tegra186-sdhci
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  assigned-clocks: true
+  assigned-clock-parents: true
+  assigned-clock-rates: true
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    maxItems: 2
+
+  resets:
+    items:
+      - description: module reset
+
+  reset-names:
+    items:
+      - const: sdhci
+
+  power-gpios:
+    description: specify GPIOs for power control
+    maxItems: 1
+
+  interconnects:
+    items:
+      - description: memory read client
+      - description: memory write client
+
+  interconnect-names:
+    items:
+      - const: dma-mem # read
+      - const: write
+
+  iommus:
+    maxItems: 1
+
+  operating-points-v2:
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+
+  power-domains:
+    items:
+      - description: phandle to the core power domain
+
+  nvidia,default-tap:
+    description: Specify the default inbound sampling clock trimmer value for
+      non-tunable modes.
+
+      The values are used for compensating trace length differences by
+      adjusting the sampling point. The values are programmed to the Vendor
+      Clock Control Register. Please refer to the reference manual of the SoC
+      for correct values.
+
+      The DQS trim values are only used on controllers which support HS400
+      timing. Only SDMMC4 on Tegra210 and Tegra186 supports HS400.
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+
+  nvidia,default-trim:
+    description: Specify the default outbound clock trimmer value.
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+
+  nvidia,dqs-trim:
+    description: Specify DQS trim value for HS400 timing.
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+
+  nvidia,pad-autocal-pull-down-offset-1v8:
+    description: Specify drive strength calibration offsets for 1.8 V
+      signaling modes.
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+
+  nvidia,pad-autocal-pull-down-offset-1v8-timeout:
+    description: Specify drive strength used as a fallback in case the
+      automatic calibration times out on a 1.8 V signaling mode.
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+
+  nvidia,pad-autocal-pull-down-offset-3v3:
+    description: Specify drive strength calibration offsets for 3.3 V
+      signaling modes.
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+
+  nvidia,pad-autocal-pull-down-offset-3v3-timeout:
+    description: Specify drive strength used as a fallback in case the
+      automatic calibration times out on a 3.3 V signaling mode.
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+
+  nvidia,pad-autocal-pull-down-offset-sdr104:
+    description: Specify drive strength calibration offsets for SDR104 mode.
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+
+  nvidia,pad-autocal-pull-down-offset-hs400:
+    description: Specify drive strength calibration offsets for HS400 mode.
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+
+  nvidia,pad-autocal-pull-up-offset-1v8:
+    description: Specify drive strength calibration offsets for 1.8 V
+      signaling modes.
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+
+  nvidia,pad-autocal-pull-up-offset-1v8-timeout:
+    description: Specify drive strength used as a fallback in case the
+      automatic calibration times out on a 1.8 V signaling mode.
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+
+  nvidia,pad-autocal-pull-up-offset-3v3:
+    description: Specify drive strength calibration offsets for 3.3 V
+      signaling modes.
+
+      The property values are drive codes which are programmed into the
+      PD_OFFSET and PU_OFFSET sections of the SDHCI_TEGRA_AUTO_CAL_CONFIG
+      register. A higher value corresponds to higher drive strength. Please
+      refer to the reference manual of the SoC for correct values. The SDR104
+      and HS400 timing specific values are used in corresponding modes if
+      specified.
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+
+  nvidia,pad-autocal-pull-up-offset-3v3-timeout:
+    description: Specify drive strength used as a fallback in case the
+      automatic calibration times out on a 3.3 V signaling mode.
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+
+  nvidia,pad-autocal-pull-up-offset-sdr104:
+    description: Specify drive strength calibration offsets for SDR104 mode.
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+
+  nvidia,pad-autocal-pull-up-offset-hs400:
+    description: Specify drive strength calibration offsets for HS400 mode.
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+
+  nvidia,only-1-8v:
+    description: The presence of this property indicates that the controller
+      operates at a 1.8 V fixed I/O voltage.
+    $ref: "/schemas/types.yaml#/definitions/flag"
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - resets
+  - reset-names
+
+allOf:
+  - $ref: "mmc-controller.yaml"
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra20-sdhci
+              - nvidia,tegra30-sdhci
+              - nvidia,tegra114-sdhci
+              - nvidia,tegra124-sdhci
+        clocks:
+          items:
+            - description: module clock
+          minItems: 1
+          maxItems: 1
+    else:
+      properties:
+        clocks:
+          items:
+            - description: module clock
+            - description: timeout clock
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: sdhci
+            - const: tmclk
+          minItems: 2
+          maxItems: 2
+      required:
+        - clock-names
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: nvidia,tegra210-sdhci
+    then:
+      properties:
+        pinctrl-names:
+          oneOf:
+            - items:
+                - const: sdmmc-3v3
+                  description: pad configuration for 3.3 V
+                - const: sdmmc-1v8
+                  description: pad configuration for 1.8 V
+                - const: sdmmc-3v3-drv
+                  description: pull-up/down configuration for 3.3 V
+                - const: sdmmc-1v8-drv
+                  description: pull-up/down configuration for 1.8 V
+            - items:
+                - const: sdmmc-3v3-drv
+                  description: pull-up/down configuration for 3.3 V
+                - const: sdmmc-1v8-drv
+                  description: pull-up/down configuration for 1.8 V
+            - items:
+                - const: sdmmc-1v8-drv
+                  description: pull-up/down configuration for 1.8 V
+      required:
+        - clock-names
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra186-sdhci
+              - nvidia,tegra194-sdhci
+    then:
+      properties:
+        pinctrl-names:
+          items:
+            - const: sdmmc-3v3
+              description: pad configuration for 3.3 V
+            - const: sdmmc-1v8
+              description: pad configuration for 1.8 V
+      required:
+        - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    mmc@c8000200 {
+        compatible = "nvidia,tegra20-sdhci";
+        reg = <0xc8000200 0x200>;
+        interrupts = <47>;
+        clocks = <&tegra_car 14>;
+        resets = <&tegra_car 14>;
+        reset-names = "sdhci";
+        cd-gpios = <&gpio 69 0>; /* gpio PI5 */
+        wp-gpios = <&gpio 57 0>; /* gpio PH1 */
+        power-gpios = <&gpio 155 0>; /* gpio PT3 */
+        bus-width = <8>;
+    };
+
+  - |
+    #include <dt-bindings/clock/tegra210-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    mmc@700b0000 {
+        compatible = "nvidia,tegra210-sdhci";
+        reg = <0x700b0000 0x200>;
+        interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&tegra_car TEGRA210_CLK_SDMMC1>,
+                 <&tegra_car TEGRA210_CLK_SDMMC_LEGACY>;
+        clock-names = "sdhci", "tmclk";
+        resets = <&tegra_car 14>;
+        reset-names = "sdhci";
+        pinctrl-names = "sdmmc-3v3", "sdmmc-1v8",
+                        "sdmmc-3v3-drv", "sdmmc-1v8-drv";
+        pinctrl-0 = <&sdmmc1_3v3>;
+        pinctrl-1 = <&sdmmc1_1v8>;
+        pinctrl-2 = <&sdmmc1_3v3_drv>;
+        pinctrl-3 = <&sdmmc1_1v8_drv>;
+        nvidia,pad-autocal-pull-up-offset-3v3 = <0x00>;
+        nvidia,pad-autocal-pull-down-offset-3v3 = <0x7d>;
+        nvidia,pad-autocal-pull-up-offset-1v8 = <0x7b>;
+        nvidia,pad-autocal-pull-down-offset-1v8 = <0x7b>;
+        nvidia,default-tap = <0x2>;
+        nvidia,default-trim = <0x4>;
+        assigned-clocks = <&tegra_car TEGRA210_CLK_SDMMC4>,
+                          <&tegra_car TEGRA210_CLK_PLL_C4_OUT0>,
+                          <&tegra_car TEGRA210_CLK_PLL_C4>;
+        assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_C4_OUT0>;
+        assigned-clock-rates = <200000000>, <1000000000>, <1000000000>;
+    };
diff --git a/dts/Bindings/mmc/renesas,sdhi.yaml b/dts/Bindings/mmc/renesas,sdhi.yaml
index 9f1e7092cf..9ce6e06c19 100644
--- a/dts/Bindings/mmc/renesas,sdhi.yaml
+++ b/dts/Bindings/mmc/renesas,sdhi.yaml
@@ -113,31 +113,51 @@ allOf:
         clocks:
           items:
             - description: IMCLK, SDHI channel main clock1.
+            - description: CLK_HS, SDHI channel High speed clock which operates
+                           4 times that of SDHI channel main clock1.
             - description: IMCLK2, SDHI channel main clock2. When this clock is
                            turned off, external SD card detection cannot be
                            detected.
-            - description: CLK_HS, SDHI channel High speed clock which operates
-                           4 times that of SDHI channel main clock1.
             - description: ACLK, SDHI channel bus clock.
         clock-names:
           items:
-            - const: imclk
-            - const: imclk2
-            - const: clk_hs
+            - const: core
+            - const: clkh
+            - const: cd
             - const: aclk
       required:
         - clock-names
         - resets
     else:
-      properties:
-        clocks:
-          minItems: 1
-          maxItems: 2
-        clock-names:
-          minItems: 1
-          items:
-            - const: core
-            - const: cd
+      if:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - renesas,rcar-gen2-sdhi
+                - renesas,rcar-gen3-sdhi
+      then:
+        properties:
+          clocks:
+            minItems: 1
+            maxItems: 3
+          clock-names:
+            minItems: 1
+            uniqueItems: true
+            items:
+              - const: core
+              - enum: [ clkh, cd ]
+              - const: cd
+      else:
+        properties:
+          clocks:
+            minItems: 1
+            maxItems: 2
+          clock-names:
+            minItems: 1
+            items:
+              - const: core
+              - const: cd
 
   - if:
       properties:
diff --git a/dts/Bindings/mmc/sdhci-am654.yaml b/dts/Bindings/mmc/sdhci-am654.yaml
index 224303f5b9..9fbf16b3bc 100644
--- a/dts/Bindings/mmc/sdhci-am654.yaml
+++ b/dts/Bindings/mmc/sdhci-am654.yaml
@@ -48,6 +48,8 @@ properties:
       - const: clk_ahb
       - const: clk_xin
 
+  sdhci-caps-mask: true
+
   # PHY output tap delays:
   # Used to delay the data valid window and align it to the sampling clock.
   # Binding needs to be provided for each supported speed mode otherwise the
diff --git a/dts/Bindings/mmc/sdhci-msm.txt b/dts/Bindings/mmc/sdhci-msm.txt
index 50841e2843..6a8cc261bf 100644
--- a/dts/Bindings/mmc/sdhci-msm.txt
+++ b/dts/Bindings/mmc/sdhci-msm.txt
@@ -17,6 +17,7 @@ Required properties:
 		"qcom,msm8974-sdhci", "qcom,sdhci-msm-v4"
 		"qcom,msm8916-sdhci", "qcom,sdhci-msm-v4"
 		"qcom,msm8992-sdhci", "qcom,sdhci-msm-v4"
+		"qcom,msm8994-sdhci", "qcom,sdhci-msm-v4"
 		"qcom,msm8996-sdhci", "qcom,sdhci-msm-v4"
 		"qcom,qcs404-sdhci", "qcom,sdhci-msm-v5"
 		"qcom,sc7180-sdhci", "qcom,sdhci-msm-v5";
diff --git a/dts/Bindings/mmc/socfpga-dw-mshc.txt b/dts/Bindings/mmc/socfpga-dw-mshc.txt
deleted file mode 100644
index 4897bea7e3..0000000000
--- a/dts/Bindings/mmc/socfpga-dw-mshc.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-* Altera SOCFPGA specific extensions to the Synopsys Designware Mobile
-  Storage Host Controller
-
-The Synopsys designware mobile storage host controller is used to interface
-a SoC with storage medium such as eMMC or SD/MMC cards. This file documents
-differences between the core Synopsys dw mshc controller properties described
-by synopsys-dw-mshc.txt and the properties used by the Altera SOCFPGA specific
-extensions to the Synopsys Designware Mobile Storage Host Controller.
-
-Required Properties:
-
-* compatible: should be
-	- "altr,socfpga-dw-mshc": for Altera's SOCFPGA platform
-
-Example:
-
-	mmc: dwmmc0@ff704000 {
-		compatible = "altr,socfpga-dw-mshc";
-		reg = <0xff704000 0x1000>;
-		interrupts = <0 129 4>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
diff --git a/dts/Bindings/mmc/socionext,uniphier-sd.yaml b/dts/Bindings/mmc/socionext,uniphier-sd.yaml
index 56f9ff1274..a586fad0a4 100644
--- a/dts/Bindings/mmc/socionext,uniphier-sd.yaml
+++ b/dts/Bindings/mmc/socionext,uniphier-sd.yaml
@@ -26,6 +26,12 @@ properties:
   clocks:
     maxItems: 1
 
+  dmas:
+    maxItems: 1
+
+  dma-names:
+    const: rx-tx
+
   reset-names:
     description: |
       There are three reset signals at maximum
diff --git a/dts/Bindings/mmc/synopsys-dw-mshc.yaml b/dts/Bindings/mmc/synopsys-dw-mshc.yaml
index 240abb6f10..ae6d6fca79 100644
--- a/dts/Bindings/mmc/synopsys-dw-mshc.yaml
+++ b/dts/Bindings/mmc/synopsys-dw-mshc.yaml
@@ -15,7 +15,10 @@ maintainers:
 # Everything else is described in the common file
 properties:
   compatible:
-    const: snps,dw-mshc
+    enum:
+      - altr,socfpga-dw-mshc
+      - img,pistachio-dw-mshc
+      - snps,dw-mshc
 
   reg:
     maxItems: 1
diff --git a/dts/Bindings/mtd/jedec,spi-nor.yaml b/dts/Bindings/mtd/jedec,spi-nor.yaml
index ed590d7c6e..39421f7233 100644
--- a/dts/Bindings/mtd/jedec,spi-nor.yaml
+++ b/dts/Bindings/mtd/jedec,spi-nor.yaml
@@ -11,6 +11,7 @@ maintainers:
 
 allOf:
   - $ref: "mtd.yaml#"
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
 
 properties:
   compatible:
@@ -88,7 +89,7 @@ patternProperties:
   "^otp(-[0-9]+)?$":
     type: object
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/dts/Bindings/mtd/renesas-nandc.yaml b/dts/Bindings/mtd/renesas-nandc.yaml
new file mode 100644
index 0000000000..2870d36361
--- /dev/null
+++ b/dts/Bindings/mtd/renesas-nandc.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/renesas-nandc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car Gen3 & RZ/N1x NAND flash controller device tree bindings
+
+maintainers:
+  - Miquel Raynal <miquel.raynal@bootlin.com>
+
+allOf:
+  - $ref: "nand-controller.yaml"
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - renesas,r9a06g032-nandc
+          - const: renesas,rzn1-nandc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: APB host controller clock
+      - description: External NAND bus clock
+
+  clock-names:
+    items:
+      - const: hclk
+      - const: eclk
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/r9a06g032-sysctrl.h>
+
+    nand-controller@40102000 {
+        compatible = "renesas,r9a06g032-nandc", "renesas,rzn1-nandc";
+        reg = <0x40102000 0x2000>;
+        interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&sysctrl R9A06G032_HCLK_NAND>, <&sysctrl R9A06G032_CLK_NAND>;
+        clock-names = "hclk", "eclk";
+        #address-cells = <1>;
+        #size-cells = <0>;
+    };
diff --git a/dts/Bindings/mtd/ti,gpmc-nand.yaml b/dts/Bindings/mtd/ti,gpmc-nand.yaml
index beb26b9bcf..4ac198814b 100644
--- a/dts/Bindings/mtd/ti,gpmc-nand.yaml
+++ b/dts/Bindings/mtd/ti,gpmc-nand.yaml
@@ -16,7 +16,10 @@ description:
 
 properties:
   compatible:
-    const: ti,omap2-nand
+    items:
+      - enum:
+          - ti,am64-nand
+          - ti,omap2-nand
 
   reg:
     maxItems: 1
@@ -53,6 +56,11 @@ properties:
     enum: [8, 16]
     default: 8
 
+  rb-gpios:
+    description:
+      GPIO connection to R/B signal from NAND chip
+    maxItems: 1
+
 patternProperties:
   "@[0-9a-f]+$":
     $ref: "/schemas/mtd/partitions/partition.yaml"
diff --git a/dts/Bindings/mux/gpio-mux.yaml b/dts/Bindings/mux/gpio-mux.yaml
index 0a7c8d6498..ee4de9fbaf 100644
--- a/dts/Bindings/mux/gpio-mux.yaml
+++ b/dts/Bindings/mux/gpio-mux.yaml
@@ -26,7 +26,10 @@ properties:
       List of gpios used to control the multiplexer, least significant bit first.
 
   '#mux-control-cells':
-    const: 0
+    enum: [ 0, 1 ]
+
+  '#mux-state-cells':
+    enum: [ 1, 2 ]
 
   idle-state:
     default: -1
@@ -34,7 +37,11 @@ properties:
 required:
   - compatible
   - mux-gpios
-  - "#mux-control-cells"
+anyOf:
+  - required:
+      - "#mux-control-cells"
+  - required:
+      - "#mux-state-cells"
 
 additionalProperties: false
 
diff --git a/dts/Bindings/mux/mux-consumer.yaml b/dts/Bindings/mux/mux-consumer.yaml
index 7af93298ab..d3d8549673 100644
--- a/dts/Bindings/mux/mux-consumer.yaml
+++ b/dts/Bindings/mux/mux-consumer.yaml
@@ -25,6 +25,17 @@ description: |
   strings to label each of the mux controllers listed in the "mux-controls"
   property.
 
+  If it is required to provide the state that the mux controller needs to
+  be set to, the property "mux-states" must be used. An optional property
+  "mux-state-names" can be used to provide a list of strings, to label
+  each of the multiplixer states listed in the "mux-states" property.
+
+  Properties "mux-controls" and "mux-states" can be used depending on how
+  the consumers want to control the mux controller. If the consumer needs
+  needs to set multiple states in a mux controller, then property
+  "mux-controls" can be used. If the consumer needs to set the mux
+  controller to a given state then property "mux-states" can be used.
+
   mux-ctrl-specifier typically encodes the chip-relative mux controller number.
   If the mux controller chip only provides a single mux controller, the
   mux-ctrl-specifier can typically be left out.
@@ -35,12 +46,22 @@ properties:
   mux-controls:
     $ref: /schemas/types.yaml#/definitions/phandle-array
 
+  mux-states:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+
   mux-control-names:
     description:
       Devices that use more than a single mux controller can use the
       "mux-control-names" property to map the name of the requested mux
       controller to an index into the list given by the "mux-controls" property.
 
+  mux-state-names:
+    description:
+      Devices that use more than a single multiplexer state can use the
+      "mux-state-names" property to map the name of the requested mux
+      controller to an index into the list given by the "mux-states"
+      property.
+
 additionalProperties: true
 
 ...
diff --git a/dts/Bindings/mux/mux-controller.yaml b/dts/Bindings/mux/mux-controller.yaml
index 736a84c3b6..c855fbad38 100644
--- a/dts/Bindings/mux/mux-controller.yaml
+++ b/dts/Bindings/mux/mux-controller.yaml
@@ -25,7 +25,9 @@ description: |
   --------------------
 
   Mux controller nodes must specify the number of cells used for the
-  specifier using the '#mux-control-cells' property.
+  specifier using the '#mux-control-cells' or '#mux-state-cells' property.
+  The value of '#mux-state-cells' will always be one greater than the value
+  of '#mux-control-cells'.
 
   Optionally, mux controller nodes can also specify the state the mux should
   have when it is idle. The idle-state property is used for this. If the
@@ -67,6 +69,8 @@ select:
           pattern: '^mux-controller'
     - required:
         - '#mux-control-cells'
+    - required:
+        - '#mux-state-cells'
 
 properties:
   $nodename:
@@ -75,6 +79,9 @@ properties:
   '#mux-control-cells':
     enum: [ 0, 1 ]
 
+  '#mux-state-cells':
+    enum: [ 1, 2 ]
+
   idle-state:
     $ref: /schemas/types.yaml#/definitions/int32
     minimum: -2
@@ -179,4 +186,21 @@ examples:
             };
         };
     };
+
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    mux1: mux-controller {
+        compatible = "gpio-mux";
+        #mux-state-cells = <1>;
+        mux-gpios = <&exp_som 2 GPIO_ACTIVE_HIGH>;
+    };
+
+    transceiver4: can-phy4 {
+        compatible = "ti,tcan1042";
+        #phy-cells = <0>;
+        max-bitrate = <5000000>;
+        standby-gpios = <&exp_som 7 GPIO_ACTIVE_HIGH>;
+        mux-states = <&mux1 1>;
+    };
 ...
diff --git a/dts/Bindings/net/actions,owl-emac.yaml b/dts/Bindings/net/actions,owl-emac.yaml
index 1626e0a821..d30fada2ac 100644
--- a/dts/Bindings/net/actions,owl-emac.yaml
+++ b/dts/Bindings/net/actions,owl-emac.yaml
@@ -51,6 +51,10 @@ properties:
     description:
       Phandle to the device containing custom config.
 
+  mdio:
+    $ref: mdio.yaml#
+    unevaluatedProperties: false
+
 required:
   - compatible
   - reg
diff --git a/dts/Bindings/net/allwinner,sun8i-a83t-emac.yaml b/dts/Bindings/net/allwinner,sun8i-a83t-emac.yaml
index 407586bc36..6a4831fd36 100644
--- a/dts/Bindings/net/allwinner,sun8i-a83t-emac.yaml
+++ b/dts/Bindings/net/allwinner,sun8i-a83t-emac.yaml
@@ -122,6 +122,7 @@ allOf:
 
         mdio-mux:
           type: object
+          unevaluatedProperties: false
 
           properties:
             compatible:
@@ -132,17 +133,18 @@ allOf:
               description:
                 Phandle to EMAC MDIO.
 
+            "#address-cells":
+              const: 1
+
+            "#size-cells":
+              const: 0
+
             mdio@1:
-              type: object
+              $ref: mdio.yaml#
+              unevaluatedProperties: false
               description: Internal MDIO Bus
 
               properties:
-                "#address-cells":
-                  const: 1
-
-                "#size-cells":
-                  const: 0
-
                 compatible:
                   const: allwinner,sun8i-h3-mdio-internal
 
@@ -168,16 +170,11 @@ allOf:
 
 
             mdio@2:
-              type: object
+              $ref: mdio.yaml#
+              unevaluatedProperties: false
               description: External MDIO Bus (H3 only)
 
               properties:
-                "#address-cells":
-                  const: 1
-
-                "#size-cells":
-                  const: 0
-
                 reg:
                   const: 2
 
diff --git a/dts/Bindings/net/brcm,amac.txt b/dts/Bindings/net/brcm,amac.txt
deleted file mode 100644
index 0120ebe932..0000000000
--- a/dts/Bindings/net/brcm,amac.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-Broadcom AMAC Ethernet Controller Device Tree Bindings
--------------------------------------------------------------
-
-Required properties:
- - compatible:	"brcm,amac"
-		"brcm,nsp-amac"
-		"brcm,ns2-amac"
- - reg:		Address and length of the register set for the device. It
-		contains the information of registers in the same order as
-		described by reg-names
- - reg-names:	Names of the registers.
-		"amac_base":	Address and length of the GMAC registers
-		"idm_base":	Address and length of the GMAC IDM registers
-				(required for NSP and Northstar2)
-		"nicpm_base":	Address and length of the NIC Port Manager
-				registers (required for Northstar2)
- - interrupts:	Interrupt number
-
-The MAC address will be determined using the optional properties
-defined in ethernet.txt.
-
-Examples:
-
-amac0: ethernet@18022000 {
-	compatible = "brcm,nsp-amac";
-	reg = <0x18022000 0x1000>,
-	      <0x18110000 0x1000>;
-	reg-names = "amac_base", "idm_base";
-	interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
-};
diff --git a/dts/Bindings/net/brcm,amac.yaml b/dts/Bindings/net/brcm,amac.yaml
new file mode 100644
index 0000000000..8f031932c8
--- /dev/null
+++ b/dts/Bindings/net/brcm,amac.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/brcm,amac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom AMAC Ethernet Controller Device Tree Bindings
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+allOf:
+  - $ref: "ethernet-controller.yaml#"
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - brcm,amac
+    then:
+      properties:
+        reg:
+          maxItems: 2
+        reg-names:
+          maxItems: 2
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - brcm,nsp-amac
+    then:
+      properties:
+        reg:
+          minItems: 2
+          maxItems: 2
+        reg-names:
+          minItems: 2
+          maxItems: 2
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - brcm,ns2-amac
+    then:
+      properties:
+        reg:
+          minItems: 3
+        reg-names:
+          minItems: 3
+
+properties:
+  compatible:
+    enum:
+      - brcm,amac
+      - brcm,nsp-amac
+      - brcm,ns2-amac
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    minItems: 1
+    maxItems: 3
+
+  reg-names:
+    minItems: 1
+    items:
+      - const: amac_base
+      - const: idm_base
+      - const: nicpm_base
+
+unevaluatedProperties: false
+
+examples:
+  - |
+   #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+   amac0: ethernet@18022000 {
+      compatible = "brcm,nsp-amac";
+      reg = <0x18022000 0x1000>,
+            <0x18110000 0x1000>;
+      reg-names = "amac_base", "idm_base";
+      interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+   };
diff --git a/dts/Bindings/net/brcm,bcm6368-mdio-mux.yaml b/dts/Bindings/net/brcm,bcm6368-mdio-mux.yaml
index 2f34fda55f..9ef28c2a0a 100644
--- a/dts/Bindings/net/brcm,bcm6368-mdio-mux.yaml
+++ b/dts/Bindings/net/brcm,bcm6368-mdio-mux.yaml
@@ -15,18 +15,12 @@ description:
   properties as well to generate desired MDIO transaction on appropriate bus.
 
 allOf:
-  - $ref: "mdio.yaml#"
+  - $ref: mdio-mux.yaml#
 
 properties:
   compatible:
     const: brcm,bcm6368-mdio-mux
 
-  "#address-cells":
-    const: 1
-
-  "#size-cells":
-    const: 0
-
   reg:
     maxItems: 1
 
@@ -34,24 +28,6 @@ required:
   - compatible
   - reg
 
-patternProperties:
-  '^mdio@[0-1]$':
-    type: object
-    properties:
-      reg:
-        maxItems: 1
-
-      "#address-cells":
-        const: 1
-
-      "#size-cells":
-        const: 0
-
-    required:
-      - reg
-      - "#address-cells"
-      - "#size-cells"
-
 unevaluatedProperties: false
 
 examples:
diff --git a/dts/Bindings/net/brcm,bcmgenet.txt b/dts/Bindings/net/brcm,bcmgenet.txt
deleted file mode 100644
index 0b5994fba3..0000000000
--- a/dts/Bindings/net/brcm,bcmgenet.txt
+++ /dev/null
@@ -1,125 +0,0 @@
-* Broadcom BCM7xxx Ethernet Controller (GENET)
-
-Required properties:
-- compatible: should contain one of "brcm,genet-v1", "brcm,genet-v2",
-  "brcm,genet-v3", "brcm,genet-v4", "brcm,genet-v5", "brcm,bcm2711-genet-v5" or
-  "brcm,bcm7712-genet-v5".
-- reg: address and length of the register set for the device
-- interrupts and/or interrupts-extended: must be two cells, the first cell
-  is the general purpose interrupt line, while the second cell is the
-  interrupt for the ring RX and TX queues operating in ring mode.  An
-  optional third interrupt cell for Wake-on-LAN can be specified.
-  See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
-  for information on the property specifics.
-- phy-mode: see ethernet.txt file in the same directory
-- #address-cells: should be 1
-- #size-cells: should be 1
-
-Optional properties:
-- clocks: When provided, must be two phandles to the functional clocks nodes
-  of the GENET block. The first phandle is the main GENET clock used during
-  normal operation, while the second phandle is the Wake-on-LAN clock.
-- clock-names: When provided, names of the functional clock phandles, first
-  name should be "enet" and second should be "enet-wol".
-
-- phy-handle: See ethernet.txt file in the same directory; used to describe
-  configurations where a PHY (internal or external) is used.
-
-- fixed-link: When the GENET interface is connected to a MoCA hardware block or
-  when operating in a RGMII to RGMII type of connection, or when the MDIO bus is
-  voluntarily disabled, this property should be used to describe the "fixed link".
-  See Documentation/devicetree/bindings/net/fixed-link.txt for information on
-  the property specifics
-
-Required child nodes:
-
-- mdio bus node: this node should always be present regardless of the PHY
-  configuration of the GENET instance
-
-MDIO bus node required properties:
-
-- compatible: should contain one of "brcm,genet-mdio-v1", "brcm,genet-mdio-v2"
-  "brcm,genet-mdio-v3", "brcm,genet-mdio-v4", "brcm,genet-mdio-v5", the version
-  has to match the parent node compatible property (e.g: brcm,genet-v4 pairs
-  with brcm,genet-mdio-v4)
-- reg: address and length relative to the parent node base register address
-- #address-cells: address cell for MDIO bus addressing, should be 1
-- #size-cells: size of the cells for MDIO bus addressing, should be 0
-
-Ethernet PHY node properties:
-
-See Documentation/devicetree/bindings/net/phy.txt for the list of required and
-optional properties.
-
-Internal Gigabit PHY example:
-
-ethernet@f0b60000 {
-	phy-mode = "internal";
-	phy-handle = <&phy1>;
-	mac-address = [ 00 10 18 36 23 1a ];
-	compatible = "brcm,genet-v4";
-	#address-cells = <0x1>;
-	#size-cells = <0x1>;
-	reg = <0xf0b60000 0xfc4c>;
-	interrupts = <0x0 0x14 0x0>, <0x0 0x15 0x0>;
-
-	mdio@e14 {
-		compatible = "brcm,genet-mdio-v4";
-		#address-cells = <0x1>;
-		#size-cells = <0x0>;
-		reg = <0xe14 0x8>;
-
-		phy1: ethernet-phy@1 {
-			max-speed = <1000>;
-			reg = <0x1>;
-			compatible = "ethernet-phy-ieee802.3-c22";
-		};
-	};
-};
-
-MoCA interface / MAC to MAC example:
-
-ethernet@f0b80000 {
-	phy-mode = "moca";
-	fixed-link = <1 0 1000 0 0>;
-	mac-address = [ 00 10 18 36 24 1a ];
-	compatible = "brcm,genet-v4";
-	#address-cells = <0x1>;
-	#size-cells = <0x1>;
-	reg = <0xf0b80000 0xfc4c>;
-	interrupts = <0x0 0x16 0x0>, <0x0 0x17 0x0>;
-
-	mdio@e14 {
-		compatible = "brcm,genet-mdio-v4";
-		#address-cells = <0x1>;
-		#size-cells = <0x0>;
-		reg = <0xe14 0x8>;
-	};
-};
-
-
-External MDIO-connected Gigabit PHY/switch:
-
-ethernet@f0ba0000 {
-	phy-mode = "rgmii";
-	phy-handle = <&phy0>;
-	mac-address = [ 00 10 18 36 26 1a ];
-	compatible = "brcm,genet-v4";
-	#address-cells = <0x1>;
-	#size-cells = <0x1>;
-	reg = <0xf0ba0000 0xfc4c>;
-	interrupts = <0x0 0x18 0x0>, <0x0 0x19 0x0>;
-
-	mdio@e14 {
-		compatible = "brcm,genet-mdio-v4";
-		#address-cells = <0x1>;
-		#size-cells = <0x0>;
-		reg = <0xe14 0x8>;
-
-		phy0: ethernet-phy@0 {
-			max-speed = <1000>;
-			reg = <0x0>;
-			compatible = "ethernet-phy-ieee802.3-c22";
-		};
-	};
-};
diff --git a/dts/Bindings/net/brcm,bcmgenet.yaml b/dts/Bindings/net/brcm,bcmgenet.yaml
new file mode 100644
index 0000000000..e5af53508e
--- /dev/null
+++ b/dts/Bindings/net/brcm,bcmgenet.yaml
@@ -0,0 +1,145 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/brcm,bcmgenet.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM7xxx Ethernet Controller (GENET) binding
+
+maintainers:
+  - Doug Berger <opendmb@gmail.com>
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - brcm,genet-v1
+      - brcm,genet-v2
+      - brcm,genet-v3
+      - brcm,genet-v4
+      - brcm,genet-v5
+      - brcm,bcm2711-genet-v5
+      - brcm,bcm7712-genet-v5
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 2
+    items:
+      - description: general purpose interrupt line
+      - description: RX and TX rings interrupt line
+      - description: Wake-on-LAN interrupt line
+
+
+  clocks:
+    minItems: 1
+    items:
+      - description: main clock
+      - description: EEE clock
+      - description: Wake-on-LAN clock
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: enet
+      - const: enet-eee
+      - const: enet-wol
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+patternProperties:
+  "^mdio@[0-9a-f]+$":
+    type: object
+    $ref: "brcm,unimac-mdio.yaml"
+
+    description:
+      GENET internal UniMAC MDIO bus
+
+required:
+  - reg
+  - interrupts
+  - phy-mode
+  - "#address-cells"
+  - "#size-cells"
+
+allOf:
+  - $ref: ethernet-controller.yaml
+
+unevaluatedProperties: false
+
+examples:
+  #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+  - |
+    ethernet@f0b60000 {
+        phy-mode = "internal";
+        phy-handle = <&phy1>;
+        mac-address = [ 00 10 18 36 23 1a ];
+        compatible = "brcm,genet-v4";
+        reg = <0xf0b60000 0xfc4c>;
+        interrupts = <0x0 0x14 0x0>, <0x0 0x15 0x0>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        mdio0: mdio@e14 {
+           compatible = "brcm,genet-mdio-v4";
+           #address-cells = <1>;
+           #size-cells = <0>;
+           reg = <0xe14 0x8>;
+
+           phy1: ethernet-phy@1 {
+                max-speed = <1000>;
+                reg = <1>;
+                compatible = "ethernet-phy-ieee802.3-c22";
+           };
+        };
+    };
+
+  - |
+    ethernet@f0b80000 {
+        phy-mode = "moca";
+        fixed-link = <1 0 1000 0 0>;
+        mac-address = [ 00 10 18 36 24 1a ];
+        compatible = "brcm,genet-v4";
+        #address-cells = <1>;
+        #size-cells = <1>;
+        reg = <0xf0b80000 0xfc4c>;
+        interrupts = <0x0 0x16 0x0>, <0x0 0x17 0x0>;
+
+        mdio1: mdio@e14 {
+           compatible = "brcm,genet-mdio-v4";
+           #address-cells = <1>;
+           #size-cells = <0>;
+           reg = <0xe14 0x8>;
+        };
+    };
+
+  - |
+    ethernet@f0ba0000 {
+        phy-mode = "rgmii";
+        phy-handle = <&phy0>;
+        mac-address = [ 00 10 18 36 26 1a ];
+        compatible = "brcm,genet-v4";
+        #address-cells = <1>;
+        #size-cells = <1>;
+        reg = <0xf0ba0000 0xfc4c>;
+        interrupts = <0x0 0x18 0x0>, <0x0 0x19 0x0>;
+
+        mdio2: mdio@e14 {
+           compatible = "brcm,genet-mdio-v4";
+           #address-cells = <1>;
+           #size-cells = <0>;
+           reg = <0xe14 0x8>;
+
+           phy0: ethernet-phy@0 {
+                max-speed = <1000>;
+                reg = <0>;
+                compatible = "ethernet-phy-ieee802.3-c22";
+           };
+        };
+    };
diff --git a/dts/Bindings/net/brcm,mdio-mux-iproc.txt b/dts/Bindings/net/brcm,mdio-mux-iproc.txt
deleted file mode 100644
index deb9e852ea..0000000000
--- a/dts/Bindings/net/brcm,mdio-mux-iproc.txt
+++ /dev/null
@@ -1,62 +0,0 @@
-Properties for an MDIO bus multiplexer found in Broadcom iProc based SoCs.
-
-This MDIO bus multiplexer defines buses that could be internal as well as
-external to SoCs and could accept MDIO transaction compatible to C-22 or
-C-45 Clause. When child bus is selected, one needs to select these two
-properties as well to generate desired MDIO transaction on appropriate bus.
-
-Required properties in addition to the generic multiplexer properties:
-
-MDIO multiplexer node:
-- compatible: brcm,mdio-mux-iproc.
-
-Every non-ethernet PHY requires a compatible so that it could be probed based
-on this compatible string.
-
-Optional properties:
-- clocks: phandle of the core clock which drives the mdio block.
-
-Additional information regarding generic multiplexer properties can be found
-at- Documentation/devicetree/bindings/net/mdio-mux.yaml
-
-
-for example:
-		mdio_mux_iproc: mdio-mux@66020000 {
-			compatible = "brcm,mdio-mux-iproc";
-			reg = <0x66020000 0x250>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			mdio@0 {
-				reg = <0x0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				pci_phy0: pci-phy@0 {
-					compatible = "brcm,ns2-pcie-phy";
-					reg = <0x0>;
-					#phy-cells = <0>;
-				};
-			};
-
-			mdio@7 {
-				reg = <0x7>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				pci_phy1: pci-phy@0 {
-					compatible = "brcm,ns2-pcie-phy";
-					reg = <0x0>;
-					#phy-cells = <0>;
-				};
-			};
-			mdio@10 {
-				reg = <0x10>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				gphy0: eth-phy@10 {
-					reg = <0x10>;
-				};
-			};
-		};
diff --git a/dts/Bindings/net/brcm,mdio-mux-iproc.yaml b/dts/Bindings/net/brcm,mdio-mux-iproc.yaml
new file mode 100644
index 0000000000..af96b4fd89
--- /dev/null
+++ b/dts/Bindings/net/brcm,mdio-mux-iproc.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/brcm,mdio-mux-iproc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MDIO bus multiplexer found in Broadcom iProc based SoCs.
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+description:
+  This MDIO bus multiplexer defines buses that could be internal as well as
+  external to SoCs and could accept MDIO transaction compatible to C-22 or
+  C-45 Clause. When child bus is selected, one needs to select these two
+  properties as well to generate desired MDIO transaction on appropriate bus.
+
+allOf:
+  - $ref: /schemas/net/mdio-mux.yaml#
+
+properties:
+  compatible:
+    const: brcm,mdio-mux-iproc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description: core clock driving the MDIO block
+
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    mdio_mux_iproc: mdio-mux@66020000 {
+        compatible = "brcm,mdio-mux-iproc";
+        reg = <0x66020000 0x250>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        mdio@0 {
+           reg = <0x0>;
+           #address-cells = <1>;
+           #size-cells = <0>;
+
+           pci_phy0: pci-phy@0 {
+              compatible = "brcm,ns2-pcie-phy";
+              reg = <0x0>;
+              #phy-cells = <0>;
+           };
+        };
+
+        mdio@7 {
+           reg = <0x7>;
+           #address-cells = <1>;
+           #size-cells = <0>;
+
+           pci_phy1: pci-phy@0 {
+              compatible = "brcm,ns2-pcie-phy";
+              reg = <0x0>;
+              #phy-cells = <0>;
+           };
+        };
+
+        mdio@10 {
+           reg = <0x10>;
+           #address-cells = <1>;
+           #size-cells = <0>;
+
+           gphy0: eth-phy@10 {
+              reg = <0x10>;
+           };
+        };
+    };
diff --git a/dts/Bindings/net/brcm,systemport.txt b/dts/Bindings/net/brcm,systemport.txt
deleted file mode 100644
index 75736739bf..0000000000
--- a/dts/Bindings/net/brcm,systemport.txt
+++ /dev/null
@@ -1,38 +0,0 @@
-* Broadcom BCM7xxx Ethernet Systemport Controller (SYSTEMPORT)
-
-Required properties:
-- compatible: should be one of:
-	      "brcm,systemport-v1.00"
-	      "brcm,systemportlite-v1.00" or
-	      "brcm,systemport"
-- reg: address and length of the register set for the device.
-- interrupts: interrupts for the device, first cell must be for the rx
-  interrupts, and the second cell should be for the transmit queues. An
-  optional third interrupt cell for Wake-on-LAN can be specified
-- local-mac-address: Ethernet MAC address (48 bits) of this adapter
-- phy-mode: Should be a string describing the PHY interface to the
-  Ethernet switch/PHY, see Documentation/devicetree/bindings/net/ethernet.txt
-- fixed-link: see Documentation/devicetree/bindings/net/fixed-link.txt for
-  the property specific details
-
-Optional properties:
-- systemport,num-tier2-arb: number of tier 2 arbiters, an integer
-- systemport,num-tier1-arb: number of tier 1 arbiters, an integer
-- systemport,num-txq: number of HW transmit queues, an integer
-- systemport,num-rxq: number of HW receive queues, an integer
-- clocks: When provided, must be two phandles to the functional clocks nodes of
-  the SYSTEMPORT block. The first phandle is the main SYSTEMPORT clock used
-  during normal operation, while the second phandle is the Wake-on-LAN clock.
-- clock-names: When provided, names of the functional clock phandles, first
-  name should be "sw_sysport" and second should be "sw_sysportwol".
-
-Example:
-ethernet@f04a0000 {
-	compatible = "brcm,systemport-v1.00";
-	reg = <0xf04a0000 0x4650>;
-	local-mac-address = [ 00 11 22 33 44 55 ];
-	fixed-link = <0 1 1000 0 0>;
-	phy-mode = "gmii";
-	interrupts = <0x0 0x16 0x0>,
-		<0x0 0x17 0x0>;
-};
diff --git a/dts/Bindings/net/brcm,systemport.yaml b/dts/Bindings/net/brcm,systemport.yaml
new file mode 100644
index 0000000000..5fc9c9fafd
--- /dev/null
+++ b/dts/Bindings/net/brcm,systemport.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/brcm,systemport.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM7xxx Ethernet Systemport Controller (SYSTEMPORT)
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - brcm,systemport-v1.00
+      - brcm,systemportlite-v1.00
+      - brcm,systemport
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 2
+    items:
+      - description: interrupt line for RX queues
+      - description: interrupt line for TX queues
+      - description: interrupt line for Wake-on-LAN
+
+  clocks:
+    items:
+      - description: main clock
+      - description: Wake-on-LAN clock
+
+  clock-names:
+    items:
+      - const: sw_sysport
+      - const: sw_sysportwol
+
+  systemport,num-tier2-arb:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Number of tier 2 arbiters
+
+  systemport,num-tier1-arb:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Number of tier 2 arbiters
+
+  systemport,num-txq:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 32
+    description:
+      Number of HW transmit queues
+
+  systemport,num-rxq:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 32
+    description:
+      Number of HW receive queues
+
+required:
+  - reg
+  - interrupts
+  - phy-mode
+
+allOf:
+  - $ref: "ethernet-controller.yaml#"
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    ethernet@f04a0000 {
+        compatible = "brcm,systemport-v1.00";
+        reg = <0xf04a0000 0x4650>;
+        local-mac-address = [ 00 11 22 33 44 55 ];
+        phy-mode = "gmii";
+        interrupts = <0x0 0x16 0x0>,
+                     <0x0 0x17 0x0>;
+        fixed-link {
+            speed = <1000>;
+            full-duplex;
+        };
+    };
diff --git a/dts/Bindings/net/brcm,unimac-mdio.yaml b/dts/Bindings/net/brcm,unimac-mdio.yaml
index f4f4c37f1d..0be426ee1e 100644
--- a/dts/Bindings/net/brcm,unimac-mdio.yaml
+++ b/dts/Bindings/net/brcm,unimac-mdio.yaml
@@ -7,6 +7,8 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Broadcom UniMAC MDIO bus controller
 
 maintainers:
+  - Doug Berger <opendmb@gmail.com>
+  - Florian Fainelli <f.fainelli@gmail.com>
   - Rafał Miłecki <rafal@milecki.pl>
 
 allOf:
@@ -64,7 +66,6 @@ unevaluatedProperties: false
 
 required:
   - reg
-  - reg-names
   - '#address-cells'
   - '#size-cells'
 
diff --git a/dts/Bindings/net/can/allwinner,sun4i-a10-can.yaml b/dts/Bindings/net/can/allwinner,sun4i-a10-can.yaml
index a95960ee3f..c93fe9d3ea 100644
--- a/dts/Bindings/net/can/allwinner,sun4i-a10-can.yaml
+++ b/dts/Bindings/net/can/allwinner,sun4i-a10-can.yaml
@@ -17,6 +17,7 @@ properties:
           - const: allwinner,sun7i-a20-can
           - const: allwinner,sun4i-a10-can
       - const: allwinner,sun4i-a10-can
+      - const: allwinner,sun8i-r40-can
 
   reg:
     maxItems: 1
@@ -27,6 +28,19 @@ properties:
   clocks:
     maxItems: 1
 
+  resets:
+    maxItems: 1
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: allwinner,sun8i-r40-can
+
+then:
+  required:
+    - resets
+
 required:
   - compatible
   - reg
@@ -47,5 +61,15 @@ examples:
         interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
         clocks = <&ccu CLK_APB1_CAN>;
     };
+  - |
+    #define RST_BUS_CAN		68
+    #define CLK_BUS_CAN		91
+    can1: can@1c2bc00 {
+        compatible = "allwinner,sun8i-r40-can";
+        reg = <0x01c2bc00 0x400>;
+        interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&ccu CLK_BUS_CAN>;
+        resets = <&ccu RST_BUS_CAN>;
+    };
 
 ...
diff --git a/dts/Bindings/net/can/bosch,m_can.yaml b/dts/Bindings/net/can/bosch,m_can.yaml
index fb547e26c6..401ab7cdb3 100644
--- a/dts/Bindings/net/can/bosch,m_can.yaml
+++ b/dts/Bindings/net/can/bosch,m_can.yaml
@@ -76,33 +76,31 @@ properties:
       M_CAN user manual for details.
     $ref: /schemas/types.yaml#/definitions/int32-array
     items:
-      items:
-        - description: The 'offset' is an address offset of the Message RAM where
-            the following elements start from. This is usually set to 0x0 if
-            you're using a private Message RAM.
-          default: 0
-        - description: 11-bit Filter 0-128 elements / 0-128 words
-          minimum: 0
-          maximum: 128
-        - description: 29-bit Filter 0-64 elements / 0-128 words
-          minimum: 0
-          maximum: 64
-        - description: Rx FIFO 0 0-64 elements / 0-1152 words
-          minimum: 0
-          maximum: 64
-        - description: Rx FIFO 1 0-64 elements / 0-1152 words
-          minimum: 0
-          maximum: 64
-        - description: Rx Buffers 0-64 elements / 0-1152 words
-          minimum: 0
-          maximum: 64
-        - description: Tx Event FIFO 0-32 elements / 0-64 words
-          minimum: 0
-          maximum: 32
-        - description: Tx Buffers 0-32 elements / 0-576 words
-          minimum: 0
-          maximum: 32
-    maxItems: 1
+      - description: The 'offset' is an address offset of the Message RAM where
+          the following elements start from. This is usually set to 0x0 if
+          you're using a private Message RAM.
+        default: 0
+      - description: 11-bit Filter 0-128 elements / 0-128 words
+        minimum: 0
+        maximum: 128
+      - description: 29-bit Filter 0-64 elements / 0-128 words
+        minimum: 0
+        maximum: 64
+      - description: Rx FIFO 0 0-64 elements / 0-1152 words
+        minimum: 0
+        maximum: 64
+      - description: Rx FIFO 1 0-64 elements / 0-1152 words
+        minimum: 0
+        maximum: 64
+      - description: Rx Buffers 0-64 elements / 0-1152 words
+        minimum: 0
+        maximum: 64
+      - description: Tx Event FIFO 0-32 elements / 0-64 words
+        minimum: 0
+        maximum: 32
+      - description: Tx Buffers 0-32 elements / 0-576 words
+        minimum: 0
+        maximum: 32
 
   power-domains:
     description:
diff --git a/dts/Bindings/net/can/tcan4x5x.txt b/dts/Bindings/net/can/tcan4x5x.txt
index 0968b40aef..e3501bfa22 100644
--- a/dts/Bindings/net/can/tcan4x5x.txt
+++ b/dts/Bindings/net/can/tcan4x5x.txt
@@ -31,7 +31,7 @@ tcan4x5x: tcan4x5x@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		spi-max-frequency = <10000000>;
-		bosch,mram-cfg = <0x0 0 0 32 0 0 1 1>;
+		bosch,mram-cfg = <0x0 0 0 16 0 0 1 1>;
 		interrupt-parent = <&gpio1>;
 		interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
 		device-state-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
diff --git a/dts/Bindings/net/cdns,macb.yaml b/dts/Bindings/net/cdns,macb.yaml
new file mode 100644
index 0000000000..8dd06db341
--- /dev/null
+++ b/dts/Bindings/net/cdns,macb.yaml
@@ -0,0 +1,159 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/cdns,macb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cadence MACB/GEM Ethernet controller
+
+maintainers:
+  - Nicolas Ferre <nicolas.ferre@microchip.com>
+  - Claudiu Beznea <claudiu.beznea@microchip.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - cdns,at91rm9200-emac  # Atmel at91rm9200 SoC
+          - const: cdns,emac          # Generic
+
+      - items:
+          - enum:
+              - cdns,zynq-gem         # Xilinx Zynq-7xxx SoC
+              - cdns,zynqmp-gem       # Xilinx Zynq Ultrascale+ MPSoC
+          - const: cdns,gem           # Generic
+
+      - items:
+          - enum:
+              - cdns,at91sam9260-macb # Atmel at91sam9 SoCs
+              - cdns,sam9x60-macb     # Microchip sam9x60 SoC
+          - const: cdns,macb          # Generic
+
+      - items:
+          - enum:
+              - atmel,sama5d3-macb    # 10/100Mbit IP on Atmel sama5d3 SoCs
+          - enum:
+              - cdns,at91sam9260-macb # Atmel at91sam9 SoCs.
+          - const: cdns,macb          # Generic
+
+      - enum:
+          - atmel,sama5d29-gem        # GEM XL IP (10/100) on Atmel sama5d29 SoCs
+          - atmel,sama5d2-gem         # GEM IP (10/100) on Atmel sama5d2 SoCs
+          - atmel,sama5d3-gem         # Gigabit IP on Atmel sama5d3 SoCs
+          - atmel,sama5d4-gem         # GEM IP (10/100) on Atmel sama5d4 SoCs
+          - cdns,at32ap7000-macb      # Other 10/100 usage or use the generic form
+          - cdns,np4-macb             # NP4 SoC devices
+          - microchip,sama7g5-emac    # Microchip SAMA7G5 ethernet interface
+          - microchip,sama7g5-gem     # Microchip SAMA7G5 gigabit ethernet interface
+          - sifive,fu540-c000-gem     # SiFive FU540-C000 SoC
+          - cdns,emac                 # Generic
+          - cdns,gem                  # Generic
+          - cdns,macb                 # Generic
+
+  reg:
+    minItems: 1
+    items:
+      - description: Basic register set
+      - description: GEMGXL Management block registers on SiFive FU540-C000 SoC
+
+  interrupts:
+    minItems: 1
+    maxItems: 8
+    description: One interrupt per available hardware queue
+
+  clocks:
+    minItems: 1
+    maxItems: 5
+
+  clock-names:
+    minItems: 1
+    items:
+      - enum: [ ether_clk, hclk, pclk ]
+      - enum: [ hclk, pclk ]
+      - const: tx_clk
+      - enum: [ rx_clk, tsu_clk ]
+      - const: tsu_clk
+
+  local-mac-address: true
+
+  phy-mode: true
+
+  phy-handle: true
+
+  fixed-link: true
+
+  iommus:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  mdio:
+    type: object
+    description:
+      Node containing PHY children. If this node is not present, then PHYs will
+      be direct children.
+
+patternProperties:
+  "^ethernet-phy@[0-9a-f]$":
+    type: object
+    $ref: ethernet-phy.yaml#
+
+    properties:
+      reset-gpios: true
+
+      magic-packet:
+        description:
+          Indicates that the hardware supports waking up via magic packet.
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - phy-mode
+
+allOf:
+  - $ref: ethernet-controller.yaml#
+
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              const: sifive,fu540-c000-gem
+    then:
+      properties:
+        reg:
+          maxItems: 1
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    macb0: ethernet@fffc4000 {
+            compatible = "cdns,at32ap7000-macb";
+            reg = <0xfffc4000 0x4000>;
+            interrupts = <21>;
+            phy-mode = "rmii";
+            local-mac-address = [3a 0e 03 04 05 06];
+            clock-names = "pclk", "hclk", "tx_clk";
+            clocks = <&clkc 30>, <&clkc 30>, <&clkc 13>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ethernet-phy@1 {
+                    reg = <0x1>;
+                    reset-gpios = <&pioE 6 1>;
+            };
+    };
diff --git a/dts/Bindings/net/dsa/dsa-port.yaml b/dts/Bindings/net/dsa/dsa-port.yaml
new file mode 100644
index 0000000000..702df848a7
--- /dev/null
+++ b/dts/Bindings/net/dsa/dsa-port.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/dsa/dsa-port.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ethernet Switch port Device Tree Bindings
+
+maintainers:
+  - Andrew Lunn <andrew@lunn.ch>
+  - Florian Fainelli <f.fainelli@gmail.com>
+  - Vivien Didelot <vivien.didelot@gmail.com>
+
+description:
+  Ethernet switch port Description
+
+allOf:
+  - $ref: "http://devicetree.org/schemas/net/ethernet-controller.yaml#"
+
+properties:
+  reg:
+    description: Port number
+
+  label:
+    description:
+      Describes the label associated with this port, which will become
+      the netdev name
+    $ref: /schemas/types.yaml#/definitions/string
+
+  link:
+    description:
+      Should be a list of phandles to other switch's DSA port. This
+      port is used as the outgoing port towards the phandle ports. The
+      full routing information must be given, not just the one hop
+      routes to neighbouring switches
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+
+  ethernet:
+    description:
+      Should be a phandle to a valid Ethernet device node.  This host
+      device is what the switch port is connected to
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  dsa-tag-protocol:
+    description:
+      Instead of the default, the switch will use this tag protocol if
+      possible. Useful when a device supports multiple protocols and
+      the default is incompatible with the Ethernet device.
+    enum:
+      - dsa
+      - edsa
+      - ocelot
+      - ocelot-8021q
+      - seville
+
+  phy-handle: true
+
+  phy-mode: true
+
+  fixed-link: true
+
+  mac-address: true
+
+  sfp: true
+
+  managed: true
+
+  rx-internal-delay-ps: true
+
+  tx-internal-delay-ps: true
+
+required:
+  - reg
+
+additionalProperties: true
+
+...
diff --git a/dts/Bindings/net/dsa/dsa.yaml b/dts/Bindings/net/dsa/dsa.yaml
index 2ad7f79ad3..b9d48e357e 100644
--- a/dts/Bindings/net/dsa/dsa.yaml
+++ b/dts/Bindings/net/dsa/dsa.yaml
@@ -46,65 +46,9 @@ patternProperties:
         type: object
         description: Ethernet switch ports
 
-        allOf:
-          - $ref: "http://devicetree.org/schemas/net/ethernet-controller.yaml#"
+        $ref: dsa-port.yaml#
 
-        properties:
-          reg:
-            description: Port number
-
-          label:
-            description:
-              Describes the label associated with this port, which will become
-              the netdev name
-            $ref: /schemas/types.yaml#/definitions/string
-
-          link:
-            description:
-              Should be a list of phandles to other switch's DSA port. This
-              port is used as the outgoing port towards the phandle ports. The
-              full routing information must be given, not just the one hop
-              routes to neighbouring switches
-            $ref: /schemas/types.yaml#/definitions/phandle-array
-
-          ethernet:
-            description:
-              Should be a phandle to a valid Ethernet device node.  This host
-              device is what the switch port is connected to
-            $ref: /schemas/types.yaml#/definitions/phandle
-
-          dsa-tag-protocol:
-            description:
-              Instead of the default, the switch will use this tag protocol if
-              possible. Useful when a device supports multiple protocols and
-              the default is incompatible with the Ethernet device.
-            enum:
-              - dsa
-              - edsa
-              - ocelot
-              - ocelot-8021q
-              - seville
-
-          phy-handle: true
-
-          phy-mode: true
-
-          fixed-link: true
-
-          mac-address: true
-
-          sfp: true
-
-          managed: true
-
-          rx-internal-delay-ps: true
-
-          tx-internal-delay-ps: true
-
-        required:
-          - reg
-
-        additionalProperties: false
+        unevaluatedProperties: false
 
 oneOf:
   - required:
diff --git a/dts/Bindings/net/dsa/nxp,sja1105.yaml b/dts/Bindings/net/dsa/nxp,sja1105.yaml
index 24cd733c11..1ea0bd4904 100644
--- a/dts/Bindings/net/dsa/nxp,sja1105.yaml
+++ b/dts/Bindings/net/dsa/nxp,sja1105.yaml
@@ -52,10 +52,8 @@ properties:
 
     patternProperties:
       "^mdio@[0-1]$":
-        type: object
-
-        allOf:
-          - $ref: "http://devicetree.org/schemas/net/mdio.yaml#"
+        $ref: /schemas/net/mdio.yaml#
+        unevaluatedProperties: false
 
         properties:
           compatible:
diff --git a/dts/Bindings/net/dsa/qca8k.yaml b/dts/Bindings/net/dsa/qca8k.yaml
index 48de0ace26..f3c88371d7 100644
--- a/dts/Bindings/net/dsa/qca8k.yaml
+++ b/dts/Bindings/net/dsa/qca8k.yaml
@@ -58,33 +58,14 @@ properties:
       B68 on the QCA832x and B49 on the QCA833x.
 
   mdio:
-    type: object
+    $ref: /schemas/net/mdio.yaml#
+    unevaluatedProperties: false
     description: Qca8k switch have an internal mdio to access switch port.
                  If this is not present, the legacy mapping is used and the
                  internal mdio access is used.
                  With the legacy mapping the reg corresponding to the internal
                  mdio is the switch reg with an offset of -1.
 
-    properties:
-      '#address-cells':
-        const: 1
-      '#size-cells':
-        const: 0
-
-    patternProperties:
-      "^(ethernet-)?phy@[0-4]$":
-        type: object
-
-        allOf:
-          - $ref: "http://devicetree.org/schemas/net/mdio.yaml#"
-
-        properties:
-          reg:
-            maxItems: 1
-
-        required:
-          - reg
-
 patternProperties:
   "^(ethernet-)?ports$":
     type: object
@@ -99,40 +80,9 @@ patternProperties:
         type: object
         description: Ethernet switch ports
 
-        properties:
-          reg:
-            description: Port number
-
-          label:
-            description:
-              Describes the label associated with this port, which will become
-              the netdev name
-            $ref: /schemas/types.yaml#/definitions/string
-
-          link:
-            description:
-              Should be a list of phandles to other switch's DSA port. This
-              port is used as the outgoing port towards the phandle ports. The
-              full routing information must be given, not just the one hop
-              routes to neighbouring switches
-            $ref: /schemas/types.yaml#/definitions/phandle-array
-
-          ethernet:
-            description:
-              Should be a phandle to a valid Ethernet device node.  This host
-              device is what the switch port is connected to
-            $ref: /schemas/types.yaml#/definitions/phandle
-
-          phy-handle: true
-
-          phy-mode: true
-
-          fixed-link: true
-
-          mac-address: true
-
-          sfp: true
+        $ref: dsa-port.yaml#
 
+        properties:
           qca,sgmii-rxclk-falling-edge:
             $ref: /schemas/types.yaml#/definitions/flag
             description:
@@ -154,10 +104,7 @@ patternProperties:
               SGMII on the QCA8337, it is advised to set this unless a communication
               issue is observed.
 
-        required:
-          - reg
-
-        additionalProperties: false
+        unevaluatedProperties: false
 
 oneOf:
   - required:
diff --git a/dts/Bindings/net/engleder,tsnep.yaml b/dts/Bindings/net/engleder,tsnep.yaml
new file mode 100644
index 0000000000..d0e1476e15
--- /dev/null
+++ b/dts/Bindings/net/engleder,tsnep.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/engleder,tsnep.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TSN endpoint Ethernet MAC binding
+
+maintainers:
+  - Gerhard Engleder <gerhard@engleder-embedded.com>
+
+allOf:
+  - $ref: ethernet-controller.yaml#
+
+properties:
+  compatible:
+    const: engleder,tsnep
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  local-mac-address: true
+
+  mac-address: true
+
+  nvmem-cells: true
+
+  nvmem-cells-names: true
+
+  phy-connection-type:
+    enum:
+      - mii
+      - gmii
+      - rgmii
+      - rgmii-id
+
+  phy-mode: true
+
+  phy-handle: true
+
+  mdio:
+    type: object
+    $ref: "mdio.yaml#"
+    description: optional node for embedded MDIO controller
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    axi {
+        #address-cells = <2>;
+        #size-cells = <2>;
+        tnsep0: ethernet@a0000000 {
+            compatible = "engleder,tsnep";
+            reg = <0x0 0xa0000000 0x0 0x10000>;
+            interrupts = <0 89 1>;
+            interrupt-parent = <&gic>;
+            local-mac-address = [00 00 00 00 00 00];
+            phy-mode = "rgmii";
+            phy-handle = <&phy0>;
+            mdio {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                suppress-preamble;
+                phy0: ethernet-phy@1 {
+                    reg = <1>;
+                    rxc-skew-ps = <1080>;
+                };
+            };
+        };
+    };
diff --git a/dts/Bindings/net/ethernet-controller.yaml b/dts/Bindings/net/ethernet-controller.yaml
index b0933a8c29..34c5463abc 100644
--- a/dts/Bindings/net/ethernet-controller.yaml
+++ b/dts/Bindings/net/ethernet-controller.yaml
@@ -17,9 +17,8 @@ properties:
     description:
       Specifies the MAC address that was assigned to the network device.
     $ref: /schemas/types.yaml#/definitions/uint8-array
-    items:
-      - minItems: 6
-        maxItems: 6
+    minItems: 6
+    maxItems: 6
 
   mac-address:
     description:
@@ -28,9 +27,8 @@ properties:
       to the device by the boot program is different from the
       local-mac-address property.
     $ref: /schemas/types.yaml#/definitions/uint8-array
-    items:
-      - minItems: 6
-        maxItems: 6
+    minItems: 6
+    maxItems: 6
 
   max-frame-size:
     $ref: /schemas/types.yaml#/definitions/uint32
@@ -69,6 +67,7 @@ properties:
       - rev-mii
       - rmii
       - rev-rmii
+      - moca
 
       # RX and TX delays are added by the MAC when required
       - rgmii
@@ -163,33 +162,30 @@ properties:
           type: array
         then:
           deprecated: true
-          minItems: 1
-          maxItems: 1
           items:
-            items:
-              - minimum: 0
-                maximum: 31
-                description:
-                  Emulated PHY ID, choose any but unique to the all
-                  specified fixed-links
+            - minimum: 0
+              maximum: 31
+              description:
+                Emulated PHY ID, choose any but unique to the all
+                specified fixed-links
 
-              - enum: [0, 1]
-                description:
-                  Duplex configuration. 0 for half duplex or 1 for
-                  full duplex
+            - enum: [0, 1]
+              description:
+                Duplex configuration. 0 for half duplex or 1 for
+                full duplex
 
-              - enum: [10, 100, 1000]
-                description:
-                  Link speed in Mbits/sec.
+            - enum: [10, 100, 1000, 2500, 10000]
+              description:
+                Link speed in Mbits/sec.
 
-              - enum: [0, 1]
-                description:
-                  Pause configuration. 0 for no pause, 1 for pause
+            - enum: [0, 1]
+              description:
+                Pause configuration. 0 for no pause, 1 for pause
 
-              - enum: [0, 1]
-                description:
-                  Asymmetric pause configuration. 0 for no asymmetric
-                  pause, 1 for asymmetric pause
+            - enum: [0, 1]
+              description:
+                Asymmetric pause configuration. 0 for no asymmetric
+                pause, 1 for asymmetric pause
 
 
       - if:
@@ -200,7 +196,7 @@ properties:
               description:
                 Link speed.
               $ref: /schemas/types.yaml#/definitions/uint32
-              enum: [10, 100, 1000]
+              enum: [10, 100, 1000, 2500, 10000]
 
             full-duplex:
               $ref: /schemas/types.yaml#/definitions/flag
diff --git a/dts/Bindings/net/fsl,fec.yaml b/dts/Bindings/net/fsl,fec.yaml
index eca41443fc..fd8371e318 100644
--- a/dts/Bindings/net/fsl,fec.yaml
+++ b/dts/Bindings/net/fsl,fec.yaml
@@ -165,7 +165,8 @@ properties:
       req_bit is the gpr bit offset for ENET stop request.
 
   mdio:
-    type: object
+    $ref: mdio.yaml#
+    unevaluatedProperties: false
     description:
       Specifies the mdio bus in the FEC, used as a container for phy nodes.
 
diff --git a/dts/Bindings/net/fsl-fman.txt b/dts/Bindings/net/fsl-fman.txt
index c00fb0d22c..020337f3c0 100644
--- a/dts/Bindings/net/fsl-fman.txt
+++ b/dts/Bindings/net/fsl-fman.txt
@@ -410,6 +410,15 @@ PROPERTIES
 		The settings and programming routines for internal/external
 		MDIO are different. Must be included for internal MDIO.
 
+- fsl,erratum-a009885
+		Usage: optional
+		Value type: <boolean>
+		Definition: Indicates the presence of the A009885
+		erratum describing that the contents of MDIO_DATA may
+		become corrupt unless it is read within 16 MDC cycles
+		of MDIO_CFG[BSY] being cleared, when performing an
+		MDIO read operation.
+
 - fsl,erratum-a011043
 		Usage: optional
 		Value type: <boolean>
diff --git a/dts/Bindings/net/intel,dwmac-plat.yaml b/dts/Bindings/net/intel,dwmac-plat.yaml
index 08a3f1f6ae..52a7fa4f49 100644
--- a/dts/Bindings/net/intel,dwmac-plat.yaml
+++ b/dts/Bindings/net/intel,dwmac-plat.yaml
@@ -117,7 +117,7 @@ examples:
         snps,mtl-tx-config = <&mtl_tx_setup>;
         snps,tso;
 
-        mdio0 {
+        mdio {
             #address-cells = <1>;
             #size-cells = <0>;
             compatible = "snps,dwmac-mdio";
diff --git a/dts/Bindings/net/intel,ixp4xx-ethernet.yaml b/dts/Bindings/net/intel,ixp4xx-ethernet.yaml
index 378ed2d3b0..67eaf02dda 100644
--- a/dts/Bindings/net/intel,ixp4xx-ethernet.yaml
+++ b/dts/Bindings/net/intel,ixp4xx-ethernet.yaml
@@ -48,8 +48,8 @@ properties:
       and the instance to use in the second cell
 
   mdio:
-    type: object
-    $ref: "mdio.yaml#"
+    $ref: mdio.yaml#
+    unevaluatedProperties: false
     description: optional node for embedded MDIO controller
 
 required:
diff --git a/dts/Bindings/net/intel,ixp4xx-hss.yaml b/dts/Bindings/net/intel,ixp4xx-hss.yaml
new file mode 100644
index 0000000000..4dcd53c3e0
--- /dev/null
+++ b/dts/Bindings/net/intel,ixp4xx-hss.yaml
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2021 Linaro Ltd.
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/net/intel,ixp4xx-hss.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Intel IXP4xx V.35 WAN High Speed Serial Link (HSS)
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: |
+  The Intel IXP4xx HSS makes use of the IXP4xx NPE (Network
+  Processing Engine) and the IXP4xx Queue Manager to process
+  V.35 Wideband Modem (WAN) links.
+
+properties:
+  compatible:
+    const: intel,ixp4xx-hss
+
+  reg:
+    maxItems: 1
+    description: The HSS instance
+
+  intel,npe-handle:
+    $ref: '/schemas/types.yaml#/definitions/phandle-array'
+    maxItems: 1
+    description: phandle to the NPE this HSS instance is using
+      and the instance to use in the second cell
+
+  intel,queue-chl-rxtrig:
+    $ref: '/schemas/types.yaml#/definitions/phandle-array'
+    maxItems: 1
+    description: phandle to the RX trigger queue on the NPE
+
+  intel,queue-chl-txready:
+    $ref: '/schemas/types.yaml#/definitions/phandle-array'
+    maxItems: 1
+    description: phandle to the TX ready queue on the NPE
+
+  intel,queue-pkt-rx:
+    $ref: '/schemas/types.yaml#/definitions/phandle-array'
+    maxItems: 1
+    description: phandle to the packet RX queue on the NPE
+
+  intel,queue-pkt-tx:
+    $ref: '/schemas/types.yaml#/definitions/phandle-array'
+    maxItems: 4
+    description: phandle to the packet TX0, TX1, TX2 and TX3 queues on the NPE
+
+  intel,queue-pkt-rxfree:
+    $ref: '/schemas/types.yaml#/definitions/phandle-array'
+    maxItems: 4
+    description: phandle to the packet RXFREE0, RXFREE1, RXFREE2 and
+      RXFREE3 queues on the NPE
+
+  intel,queue-pkt-txdone:
+    $ref: '/schemas/types.yaml#/definitions/phandle-array'
+    maxItems: 1
+    description: phandle to the packet TXDONE queue on the NPE
+
+  cts-gpios:
+    maxItems: 1
+    description: Clear To Send (CTS) GPIO line
+
+  rts-gpios:
+    maxItems: 1
+    description: Ready To Send (RTS) GPIO line
+
+  dcd-gpios:
+    maxItems: 1
+    description: Data Carrier Detect (DCD) GPIO line
+
+  dtr-gpios:
+    maxItems: 1
+    description: Data Terminal Ready (DTR) GPIO line
+
+  clk-internal-gpios:
+    maxItems: 1
+    description: Clock internal GPIO line, driving this high will make the HSS
+      use internal clocking as opposed to external clocking
+
+required:
+  - compatible
+  - reg
+  - intel,npe-handle
+  - intel,queue-chl-rxtrig
+  - intel,queue-chl-txready
+  - intel,queue-pkt-rx
+  - intel,queue-pkt-tx
+  - intel,queue-pkt-rxfree
+  - intel,queue-pkt-txdone
+  - cts-gpios
+  - rts-gpios
+  - dcd-gpios
+  - dtr-gpios
+  - clk-internal-gpios
+
+additionalProperties: false
diff --git a/dts/Bindings/net/lantiq,etop-xway.yaml b/dts/Bindings/net/lantiq,etop-xway.yaml
index 437502c5ca..3ce9f9a16b 100644
--- a/dts/Bindings/net/lantiq,etop-xway.yaml
+++ b/dts/Bindings/net/lantiq,etop-xway.yaml
@@ -46,7 +46,6 @@ properties:
 required:
   - compatible
   - reg
-  - interrupt-parent
   - interrupts
   - interrupt-names
   - lantiq,tx-burst-length
diff --git a/dts/Bindings/net/lantiq,xrx200-net.yaml b/dts/Bindings/net/lantiq,xrx200-net.yaml
index 7bc074a423..5bc1a21ca5 100644
--- a/dts/Bindings/net/lantiq,xrx200-net.yaml
+++ b/dts/Bindings/net/lantiq,xrx200-net.yaml
@@ -38,7 +38,6 @@ properties:
 required:
   - compatible
   - reg
-  - interrupt-parent
   - interrupts
   - interrupt-names
   - "#address-cells"
diff --git a/dts/Bindings/net/litex,liteeth.yaml b/dts/Bindings/net/litex,liteeth.yaml
index 76c164a819..ebf4e360f8 100644
--- a/dts/Bindings/net/litex,liteeth.yaml
+++ b/dts/Bindings/net/litex,liteeth.yaml
@@ -62,6 +62,7 @@ properties:
 
   mdio:
     $ref: mdio.yaml#
+    unevaluatedProperties: false
 
 required:
   - compatible
diff --git a/dts/Bindings/net/macb.txt b/dts/Bindings/net/macb.txt
deleted file mode 100644
index a1b06fd196..0000000000
--- a/dts/Bindings/net/macb.txt
+++ /dev/null
@@ -1,60 +0,0 @@
-* Cadence MACB/GEM Ethernet controller
-
-Required properties:
-- compatible: Should be "cdns,[<chip>-]{macb|gem}"
-  Use "cdns,at91rm9200-emac" Atmel at91rm9200 SoC.
-  Use "cdns,at91sam9260-macb" for Atmel at91sam9 SoCs.
-  Use "cdns,sam9x60-macb" for Microchip sam9x60 SoC.
-  Use "cdns,np4-macb" for NP4 SoC devices.
-  Use "cdns,at32ap7000-macb" for other 10/100 usage or use the generic form: "cdns,macb".
-  Use "atmel,sama5d2-gem" for the GEM IP (10/100) available on Atmel sama5d2 SoCs.
-  Use "atmel,sama5d29-gem" for GEM XL IP (10/100) available on Atmel sama5d29 SoCs.
-  Use "atmel,sama5d3-macb" for the 10/100Mbit IP available on Atmel sama5d3 SoCs.
-  Use "atmel,sama5d3-gem" for the Gigabit IP available on Atmel sama5d3 SoCs.
-  Use "atmel,sama5d4-gem" for the GEM IP (10/100) available on Atmel sama5d4 SoCs.
-  Use "cdns,zynq-gem" Xilinx Zynq-7xxx SoC.
-  Use "cdns,zynqmp-gem" for Zynq Ultrascale+ MPSoC.
-  Use "sifive,fu540-c000-gem" for SiFive FU540-C000 SoC.
-  Use "microchip,sama7g5-emac" for Microchip SAMA7G5 ethernet interface.
-  Use "microchip,sama7g5-gem" for Microchip SAMA7G5 gigabit ethernet interface.
-  Or the generic form: "cdns,emac".
-- reg: Address and length of the register set for the device
-	For "sifive,fu540-c000-gem", second range is required to specify the
-	address and length of the registers for GEMGXL Management block.
-- interrupts: Should contain macb interrupt
-- phy-mode: See ethernet.txt file in the same directory.
-- clock-names: Tuple listing input clock names.
-	Required elements: 'pclk', 'hclk'
-	Optional elements: 'tx_clk'
-	Optional elements: 'rx_clk' applies to cdns,zynqmp-gem
-	Optional elements: 'tsu_clk'
-- clocks: Phandles to input clocks.
-
-Optional properties:
-- mdio: node containing PHY children. If this node is not present, then PHYs
-        will be direct children.
-
-The MAC address will be determined using the optional properties
-defined in ethernet.txt.
-
-Optional properties for PHY child node:
-- reset-gpios : Should specify the gpio for phy reset
-- magic-packet : If present, indicates that the hardware supports waking
-  up via magic packet.
-- phy-handle : see ethernet.txt file in the same directory
-
-Examples:
-
-	macb0: ethernet@fffc4000 {
-		compatible = "cdns,at32ap7000-macb";
-		reg = <0xfffc4000 0x4000>;
-		interrupts = <21>;
-		phy-mode = "rmii";
-		local-mac-address = [3a 0e 03 04 05 06];
-		clock-names = "pclk", "hclk", "tx_clk";
-		clocks = <&clkc 30>, <&clkc 30>, <&clkc 13>;
-		ethernet-phy@1 {
-			reg = <0x1>;
-			reset-gpios = <&pioE 6 1>;
-		};
-	};
diff --git a/dts/Bindings/net/mdio-mux.yaml b/dts/Bindings/net/mdio-mux.yaml
index d169adf5d9..4321c87de8 100644
--- a/dts/Bindings/net/mdio-mux.yaml
+++ b/dts/Bindings/net/mdio-mux.yaml
@@ -15,9 +15,6 @@ description: |+
   bus multiplexer/switch will have one child node for each child bus.
 
 properties:
-  $nodename:
-    pattern: '^mdio-mux[\-@]?'
-
   mdio-parent-bus:
     $ref: /schemas/types.yaml#/definitions/phandle
     description:
@@ -32,12 +29,12 @@ properties:
 
 patternProperties:
   '^mdio@[0-9a-f]+$':
-    type: object
+    $ref: mdio.yaml#
+    unevaluatedProperties: false
 
     properties:
       reg:
         maxItems: 1
-        description: The sub-bus number.
 
 additionalProperties: true
 
diff --git a/dts/Bindings/net/mdio.yaml b/dts/Bindings/net/mdio.yaml
index 08e15fb158..b5706d4e7e 100644
--- a/dts/Bindings/net/mdio.yaml
+++ b/dts/Bindings/net/mdio.yaml
@@ -59,7 +59,7 @@ properties:
     type: boolean
 
 patternProperties:
-  "^ethernet-phy@[0-9a-f]+$":
+  '@[0-9a-f]+$':
     type: object
 
     properties:
@@ -76,12 +76,6 @@ patternProperties:
           the turn around line low at end of the control phase of the
           MDIO transaction.
 
-      resets:
-        maxItems: 1
-
-      reset-names:
-        const: phy
-
       reset-gpios:
         maxItems: 1
         description:
diff --git a/dts/Bindings/net/mediatek,star-emac.yaml b/dts/Bindings/net/mediatek,star-emac.yaml
index e6a5ff2082..def994c9cb 100644
--- a/dts/Bindings/net/mediatek,star-emac.yaml
+++ b/dts/Bindings/net/mediatek,star-emac.yaml
@@ -48,9 +48,8 @@ properties:
       to control the MII mode.
 
   mdio:
-    type: object
-    description:
-      Creates and registers an MDIO bus.
+    $ref: mdio.yaml#
+    unevaluatedProperties: false
 
 required:
   - compatible
diff --git a/dts/Bindings/net/microchip,lan966x-switch.yaml b/dts/Bindings/net/microchip,lan966x-switch.yaml
new file mode 100644
index 0000000000..e79e4e166a
--- /dev/null
+++ b/dts/Bindings/net/microchip,lan966x-switch.yaml
@@ -0,0 +1,169 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/microchip,lan966x-switch.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip Lan966x Ethernet switch controller
+
+maintainers:
+  - Horatiu Vultur <horatiu.vultur@microchip.com>
+
+description: |
+  The lan966x switch is a multi-port Gigabit AVB/TSN Ethernet Switch with
+  two integrated 10/100/1000Base-T PHYs. In addition to the integrated PHYs,
+  it supports up to 2RGMII/RMII, up to 3BASE-X/SERDES/2.5GBASE-X and up to
+  2 Quad-SGMII/Quad-USGMII interfaces.
+
+properties:
+  $nodename:
+    pattern: "^switch@[0-9a-f]+$"
+
+  compatible:
+    const: microchip,lan966x-switch
+
+  reg:
+    items:
+      - description: cpu target
+      - description: general control block target
+
+  reg-names:
+    items:
+      - const: cpu
+      - const: gcb
+
+  interrupts:
+    minItems: 1
+    items:
+      - description: register based extraction
+      - description: frame dma based extraction
+      - description: analyzer interrupt
+
+  interrupt-names:
+    minItems: 1
+    items:
+      - const: xtr
+      - const: fdma
+      - const: ana
+
+  resets:
+    items:
+      - description: Reset controller used for switch core reset (soft reset)
+      - description: Reset controller used for releasing the phy from reset
+
+  reset-names:
+    items:
+      - const: switch
+      - const: phy
+
+  ethernet-ports:
+    type: object
+
+    properties:
+      '#address-cells':
+        const: 1
+      '#size-cells':
+        const: 0
+
+    additionalProperties: false
+
+    patternProperties:
+      "^port@[0-9a-f]+$":
+        type: object
+
+        $ref: "/schemas/net/ethernet-controller.yaml#"
+        unevaluatedProperties: false
+
+        properties:
+          '#address-cells':
+            const: 1
+          '#size-cells':
+            const: 0
+
+          reg:
+            description:
+              Switch port number
+
+          phys:
+            description:
+              Phandle of a Ethernet SerDes PHY
+
+          phy-mode:
+            description:
+              This specifies the interface used by the Ethernet SerDes towards
+              the PHY or SFP.
+            enum:
+              - gmii
+              - sgmii
+              - qsgmii
+              - 1000base-x
+              - 2500base-x
+
+          phy-handle:
+            description:
+              Phandle of a Ethernet PHY.
+
+          sfp:
+            description:
+              Phandle of an SFP.
+
+          managed: true
+
+        required:
+          - reg
+          - phys
+          - phy-mode
+
+        oneOf:
+          - required:
+              - phy-handle
+          - required:
+              - sfp
+              - managed
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - interrupt-names
+  - resets
+  - reset-names
+  - ethernet-ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    switch: switch@e0000000 {
+      compatible = "microchip,lan966x-switch";
+      reg =  <0xe0000000 0x0100000>,
+             <0xe2000000 0x0800000>;
+      reg-names = "cpu", "gcb";
+      interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+      interrupt-names = "xtr";
+      resets = <&switch_reset 0>, <&phy_reset 0>;
+      reset-names = "switch", "phy";
+      ethernet-ports {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        port0: port@0 {
+          reg = <0>;
+          phy-handle = <&phy0>;
+          phys = <&serdes 0 0>;
+          phy-mode = "gmii";
+        };
+
+        port1: port@1 {
+          reg = <1>;
+          sfp = <&sfp_eth1>;
+          managed = "in-band-status";
+          phys = <&serdes 2 4>;
+          phy-mode = "sgmii";
+        };
+      };
+    };
+
+...
diff --git a/dts/Bindings/net/oxnas-dwmac.txt b/dts/Bindings/net/oxnas-dwmac.txt
index d7117a22fd..27db496f1c 100644
--- a/dts/Bindings/net/oxnas-dwmac.txt
+++ b/dts/Bindings/net/oxnas-dwmac.txt
@@ -9,6 +9,9 @@ Required properties on all platforms:
 - compatible:	For the OX820 SoC, it should be :
 		- "oxsemi,ox820-dwmac" to select glue
 		- "snps,dwmac-3.512" to select IP version.
+		For the OX810SE SoC, it should be :
+		- "oxsemi,ox810se-dwmac" to select glue
+		- "snps,dwmac-3.512" to select IP version.
 
 - clocks: Should contain phandles to the following clocks
 - clock-names:	Should contain the following:
diff --git a/dts/Bindings/net/qca,ar71xx.yaml b/dts/Bindings/net/qca,ar71xx.yaml
index cf4d35edaa..1ebf9e8c8a 100644
--- a/dts/Bindings/net/qca,ar71xx.yaml
+++ b/dts/Bindings/net/qca,ar71xx.yaml
@@ -34,14 +34,6 @@ properties:
   interrupts:
     maxItems: 1
 
-  '#address-cells':
-    description: number of address cells for the MDIO bus
-    const: 1
-
-  '#size-cells':
-    description: number of size cells on the MDIO bus
-    const: 0
-
   clocks:
     items:
       - description: MAC main clock
@@ -62,6 +54,10 @@ properties:
       - const: mac
       - const: mdio
 
+  mdio:
+    $ref: mdio.yaml#
+    unevaluatedProperties: false
+
 required:
   - compatible
   - reg
@@ -85,7 +81,6 @@ examples:
         reset-names = "mac", "mdio";
         clocks = <&pll 1>, <&pll 2>;
         clock-names = "eth", "mdio";
-        qca,ethcfg = <&ethcfg>;
         phy-mode = "mii";
         phy-handle = <&phy_port4>;
     };
@@ -111,9 +106,6 @@ examples:
             #size-cells = <0>;
 
             switch10: switch@10 {
-                #address-cells = <1>;
-                #size-cells = <0>;
-
                 compatible = "qca,ar9331-switch";
                 reg = <0x10>;
                 resets = <&rst 8>;
diff --git a/dts/Bindings/net/qcom,bam-dmux.yaml b/dts/Bindings/net/qcom,bam-dmux.yaml
new file mode 100644
index 0000000000..b30544410d
--- /dev/null
+++ b/dts/Bindings/net/qcom,bam-dmux.yaml
@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/qcom,bam-dmux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm BAM Data Multiplexer
+
+maintainers:
+  - Stephan Gerhold <stephan@gerhold.net>
+
+description: |
+  The BAM Data Multiplexer provides access to the network data channels
+  of modems integrated into many older Qualcomm SoCs, e.g. Qualcomm MSM8916
+  or MSM8974. It is built using a simple protocol layer on top of a DMA engine
+  (Qualcomm BAM DMA) and bidirectional interrupts to coordinate power control.
+
+  Note that this schema does not directly describe a hardware block but rather
+  a firmware convention that combines several other hardware blocks (such as the
+  DMA engine). As such it is specific to a firmware version, not a particular
+  SoC or hardware version.
+
+properties:
+  compatible:
+    const: qcom,bam-dmux
+
+  interrupts:
+    description:
+      Interrupts used by the modem to signal the AP.
+      Both interrupts must be declared as IRQ_TYPE_EDGE_BOTH.
+    items:
+      - description: Power control
+      - description: Power control acknowledgment
+
+  interrupt-names:
+    items:
+      - const: pc
+      - const: pc-ack
+
+  qcom,smem-states:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: State bits used by the AP to signal the modem.
+    items:
+      - description: Power control
+      - description: Power control acknowledgment
+
+  qcom,smem-state-names:
+    description: Names for the state bits used by the AP to signal the modem.
+    items:
+      - const: pc
+      - const: pc-ack
+
+  dmas:
+    items:
+      - description: TX DMA channel phandle
+      - description: RX DMA channel phandle
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
+required:
+  - compatible
+  - interrupts
+  - interrupt-names
+  - qcom,smem-states
+  - qcom,smem-state-names
+  - dmas
+  - dma-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    mpss: remoteproc {
+        bam-dmux {
+            compatible = "qcom,bam-dmux";
+
+            interrupt-parent = <&modem_smsm>;
+            interrupts = <1 IRQ_TYPE_EDGE_BOTH>, <11 IRQ_TYPE_EDGE_BOTH>;
+            interrupt-names = "pc", "pc-ack";
+
+            qcom,smem-states = <&apps_smsm 1>, <&apps_smsm 11>;
+            qcom,smem-state-names = "pc", "pc-ack";
+
+            dmas = <&bam_dmux_dma 4>, <&bam_dmux_dma 5>;
+            dma-names = "tx", "rx";
+        };
+    };
diff --git a/dts/Bindings/net/snps,dwmac.yaml b/dts/Bindings/net/snps,dwmac.yaml
index 7ae70dc27f..7eb43707e6 100644
--- a/dts/Bindings/net/snps,dwmac.yaml
+++ b/dts/Bindings/net/snps,dwmac.yaml
@@ -286,7 +286,8 @@ properties:
       MAC2MAC connection.
 
   mdio:
-    type: object
+    $ref: mdio.yaml#
+    unevaluatedProperties: false
     description:
       Creates and registers an MDIO bus.
 
@@ -326,6 +327,9 @@ allOf:
               - ingenic,x1600-mac
               - ingenic,x1830-mac
               - ingenic,x2000-mac
+              - snps,dwmac-3.50a
+              - snps,dwmac-4.10a
+              - snps,dwmac-4.20a
               - snps,dwxgmac
               - snps,dwxgmac-2.10
               - st,spear600-gmac
diff --git a/dts/Bindings/net/socionext,uniphier-ave4.yaml b/dts/Bindings/net/socionext,uniphier-ave4.yaml
index 6bc61c4241..aad5a9f3f9 100644
--- a/dts/Bindings/net/socionext,uniphier-ave4.yaml
+++ b/dts/Bindings/net/socionext,uniphier-ave4.yaml
@@ -72,6 +72,7 @@ properties:
 
   mdio:
     $ref: mdio.yaml#
+    unevaluatedProperties: false
 
 required:
   - compatible
diff --git a/dts/Bindings/net/stm32-dwmac.yaml b/dts/Bindings/net/stm32-dwmac.yaml
index 577f4e2844..3d8a3b763a 100644
--- a/dts/Bindings/net/stm32-dwmac.yaml
+++ b/dts/Bindings/net/stm32-dwmac.yaml
@@ -44,6 +44,12 @@ properties:
               - st,stm32-dwmac
           - const: snps,dwmac-3.50a
 
+  reg: true
+
+  reg-names:
+    items:
+      - const: stmmaceth
+
   clocks:
     minItems: 3
     items:
@@ -102,7 +108,7 @@ examples:
            compatible = "st,stm32mp1-dwmac", "snps,dwmac-4.20a";
            reg = <0x5800a000 0x2000>;
            reg-names = "stmmaceth";
-           interrupts = <&intc GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+           interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
            interrupt-names = "macirq";
            clock-names = "stmmaceth",
                      "mac-clk-tx",
@@ -121,6 +127,7 @@ examples:
            phy-mode = "rgmii";
        };
 
+  - |
     //Example 2 (MCU example)
      ethernet1: ethernet@40028000 {
            compatible = "st,stm32-dwmac", "snps,dwmac-3.50a";
@@ -136,6 +143,7 @@ examples:
            phy-mode = "mii";
        };
 
+  - |
     //Example 3
      ethernet2: ethernet@40027000 {
            compatible = "st,stm32-dwmac", "snps,dwmac-4.10a";
diff --git a/dts/Bindings/net/ti,davinci-mdio.yaml b/dts/Bindings/net/ti,davinci-mdio.yaml
index 5728fe23f5..dbfca5ee91 100644
--- a/dts/Bindings/net/ti,davinci-mdio.yaml
+++ b/dts/Bindings/net/ti,davinci-mdio.yaml
@@ -37,6 +37,13 @@ properties:
     maximum: 2500000
     description: MDIO Bus frequency
 
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: fck
+
   ti,hwmods:
     description: TI hwmod name
     deprecated: true
diff --git a/dts/Bindings/net/ti,dp83869.yaml b/dts/Bindings/net/ti,dp83869.yaml
index 70a1209cb1..1b780dce61 100644
--- a/dts/Bindings/net/ti,dp83869.yaml
+++ b/dts/Bindings/net/ti,dp83869.yaml
@@ -92,7 +92,7 @@ examples:
         tx-fifo-depth = <DP83869_PHYCR_FIFO_DEPTH_4_B_NIB>;
         rx-fifo-depth = <DP83869_PHYCR_FIFO_DEPTH_4_B_NIB>;
         ti,op-mode = <DP83869_RGMII_COPPER_ETHERNET>;
-        ti,max-output-impedance = "true";
+        ti,max-output-impedance;
         ti,clk-output-sel = <DP83869_CLK_O_SEL_CHN_A_RCLK>;
         rx-internal-delay-ps = <2000>;
         tx-internal-delay-ps = <2000>;
diff --git a/dts/Bindings/net/toshiba,visconti-dwmac.yaml b/dts/Bindings/net/toshiba,visconti-dwmac.yaml
index 59724d18e6..b12bfe61c6 100644
--- a/dts/Bindings/net/toshiba,visconti-dwmac.yaml
+++ b/dts/Bindings/net/toshiba,visconti-dwmac.yaml
@@ -71,7 +71,7 @@ examples:
             phy-mode = "rgmii-id";
             phy-handle = <&phy0>;
 
-            mdio0 {
+            mdio {
                 #address-cells = <0x1>;
                 #size-cells = <0x0>;
                 compatible = "snps,dwmac-mdio";
diff --git a/dts/Bindings/net/vertexcom-mse102x.yaml b/dts/Bindings/net/vertexcom-mse102x.yaml
new file mode 100644
index 0000000000..8156a9aeb5
--- /dev/null
+++ b/dts/Bindings/net/vertexcom-mse102x.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/net/vertexcom-mse102x.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: The Vertexcom MSE102x (SPI) Device Tree Bindings
+
+maintainers:
+  - Stefan Wahren <stefan.wahren@in-tech.com>
+
+description:
+  Vertexcom's MSE102x are a family of HomePlug GreenPHY chips.
+  They can be connected either via RGMII, RMII or SPI to a host CPU.
+
+  In order to use a MSE102x chip as SPI device, it must be defined as
+  a child of an SPI master device in the device tree.
+
+  More information can be found at
+    http://www.vertexcom.com/doc/MSE1022%20Product%20Brief.pdf
+
+allOf:
+  - $ref: ethernet-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - vertexcom,mse1021
+      - vertexcom,mse1022
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  spi-cpha: true
+
+  spi-cpol: true
+
+  spi-max-frequency:
+    minimum: 6000000
+    maximum: 7142857
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - spi-cpha
+  - spi-cpol
+  - spi-max-frequency
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ethernet@0 {
+            compatible = "vertexcom,mse1021";
+            reg = <0>;
+            interrupt-parent = <&gpio>;
+            interrupts = <23 IRQ_TYPE_EDGE_RISING>;
+            spi-cpha;
+            spi-cpol;
+            spi-max-frequency = <7142857>;
+        };
+    };
diff --git a/dts/Bindings/net/wireless/mediatek,mt76.yaml b/dts/Bindings/net/wireless/mediatek,mt76.yaml
index 1489d3c1cd..269cd63fb5 100644
--- a/dts/Bindings/net/wireless/mediatek,mt76.yaml
+++ b/dts/Bindings/net/wireless/mediatek,mt76.yaml
@@ -191,9 +191,9 @@ examples:
                    channels = <36 48>;
                    rates-ofdm = /bits/ 8 <23 23 23 23 23 23 23 23>;
                    rates-mcs = /bits/ 8 <1 23 23 23 23 23 23 23 23 23 23>,
-                                        <3 22 22 22 22 22 22 22 22 22 22>;
+                               /bits/ 8 <3 22 22 22 22 22 22 22 22 22 22>;
                    rates-ru = /bits/ 8 <3 22 22 22 22 22 22 22 22 22 22 22 22>,
-                                       <4 20 20 20 20 20 20 20 20 20 20 20 20>;
+                              /bits/ 8 <4 20 20 20 20 20 20 20 20 20 20 20 20>;
                };
                b1 {
                    channels = <100 181>;
diff --git a/dts/Bindings/net/wireless/microchip,wilc1000.yaml b/dts/Bindings/net/wireless/microchip,wilc1000.yaml
index 6c35682377..60de78f1bc 100644
--- a/dts/Bindings/net/wireless/microchip,wilc1000.yaml
+++ b/dts/Bindings/net/wireless/microchip,wilc1000.yaml
@@ -32,6 +32,21 @@ properties:
   clock-names:
     const: rtc
 
+  enable-gpios:
+    maxItems: 1
+    description: Used by wilc1000-spi to determine the GPIO line
+      connected to the ENABLE line.  If specified, reset-gpios
+      must be specified as well as otherwise the driver cannot
+      ensure the timing required between asserting ENABLE
+      and deasserting RESET.  This should be declared as an
+      active-high signal.
+
+  reset-gpios:
+    maxItems: 1
+    description: Used by wilc1000-spi to determine the GPIO line
+      connected to the RESET line.  This should be declared as an
+      active-low signal.
+
 required:
   - compatible
   - interrupts
@@ -40,6 +55,8 @@ additionalProperties: false
 
 examples:
   - |
+    #include <dt-bindings/gpio/gpio.h>
+
     spi {
       #address-cells = <1>;
       #size-cells = <0>;
@@ -51,6 +68,8 @@ examples:
         interrupts = <27 0>;
         clocks = <&pck1>;
         clock-names = "rtc";
+        enable-gpios = <&pioA 5 GPIO_ACTIVE_HIGH>;
+        reset-gpios = <&pioA 6 GPIO_ACTIVE_LOW>;
       };
     };
 
diff --git a/dts/Bindings/net/wireless/qcom,ath11k.yaml b/dts/Bindings/net/wireless/qcom,ath11k.yaml
index 85c2f699d6..cdf7b873b4 100644
--- a/dts/Bindings/net/wireless/qcom,ath11k.yaml
+++ b/dts/Bindings/net/wireless/qcom,ath11k.yaml
@@ -150,6 +150,12 @@ properties:
       string to uniquely identify variant of the calibration data in the
       board-2.bin for designs with colliding bus and device specific ids
 
+  memory-region:
+    maxItems: 1
+    description:
+      phandle to a node describing reserved memory (System RAM memory)
+      used by ath11k firmware (see bindings/reserved-memory/reserved-memory.txt)
+
 required:
   - compatible
   - reg
@@ -279,3 +285,27 @@ examples:
                           "tcl2host-status-ring";
         qcom,rproc = <&q6v5_wcss>;
     };
+
+  - |
+
+    reserved-memory {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        qcn9074_0: qcn9074_0@51100000 {
+            no-map;
+            reg = <0x0 0x51100000 0x0 0x03500000>;
+        };
+    };
+
+    pci {
+        pcie0 {
+            #size-cells = <2>;
+            #address-cells = <3>;
+ 
+            wifi_0: wifi@0 {
+                reg = <0 0 0 0 0>;
+                memory-region = <&qcn9074_0>;
+            };
+        };
+    };
diff --git a/dts/Bindings/nvmem/brcm,nvram.yaml b/dts/Bindings/nvmem/brcm,nvram.yaml
index 58ff6b0bdb..8c3f0cd228 100644
--- a/dts/Bindings/nvmem/brcm,nvram.yaml
+++ b/dts/Bindings/nvmem/brcm,nvram.yaml
@@ -24,6 +24,9 @@ properties:
   compatible:
     const: brcm,nvram
 
+  reg:
+    maxItems: 1
+
 unevaluatedProperties: false
 
 examples:
diff --git a/dts/Bindings/nvmem/mtk-efuse.txt b/dts/Bindings/nvmem/mtk-efuse.txt
index b6791702bc..39d5295994 100644
--- a/dts/Bindings/nvmem/mtk-efuse.txt
+++ b/dts/Bindings/nvmem/mtk-efuse.txt
@@ -8,8 +8,10 @@ Required properties:
 	      "mediatek,mt7623-efuse", "mediatek,efuse": for MT7623
 	      "mediatek,mt8173-efuse" or "mediatek,efuse": for MT8173
 	      "mediatek,mt8192-efuse", "mediatek,efuse": for MT8192
+	      "mediatek,mt8195-efuse", "mediatek,efuse": for MT8195
 	      "mediatek,mt8516-efuse", "mediatek,efuse": for MT8516
 - reg: Should contain registers location and length
+- bits: contain the bits range by offset and size
 
 = Data cells =
 Are child nodes of MTK-EFUSE, bindings of which as described in
diff --git a/dts/Bindings/nvmem/nvmem.yaml b/dts/Bindings/nvmem/nvmem.yaml
index 456fb80810..43ed7e32e5 100644
--- a/dts/Bindings/nvmem/nvmem.yaml
+++ b/dts/Bindings/nvmem/nvmem.yaml
@@ -50,16 +50,15 @@ patternProperties:
           Offset and size in bytes within the storage device.
 
       bits:
-        maxItems: 1
+        $ref: /schemas/types.yaml#/definitions/uint32-array
         items:
-          items:
-            - minimum: 0
-              maximum: 7
-              description:
-                Offset in bit within the address range specified by reg.
-            - minimum: 1
-              description:
-                Size in bit within the address range specified by reg.
+          - minimum: 0
+            maximum: 7
+            description:
+              Offset in bit within the address range specified by reg.
+          - minimum: 1
+            description:
+              Size in bit within the address range specified by reg.
 
     required:
       - reg
diff --git a/dts/Bindings/nvmem/rmem.yaml b/dts/Bindings/nvmem/rmem.yaml
index 1d85a0a308..a4a755dcfc 100644
--- a/dts/Bindings/nvmem/rmem.yaml
+++ b/dts/Bindings/nvmem/rmem.yaml
@@ -19,6 +19,9 @@ properties:
           - raspberrypi,bootloader-config
       - const: nvmem-rmem
 
+  reg:
+    maxItems: 1
+
   no-map:
     $ref: /schemas/types.yaml#/definitions/flag
     description:
diff --git a/dts/Bindings/nvmem/st,stm32-romem.yaml b/dts/Bindings/nvmem/st,stm32-romem.yaml
index a48c8fa56b..448a2678dc 100644
--- a/dts/Bindings/nvmem/st,stm32-romem.yaml
+++ b/dts/Bindings/nvmem/st,stm32-romem.yaml
@@ -24,6 +24,9 @@ properties:
       - st,stm32f4-otp
       - st,stm32mp15-bsec
 
+  reg:
+    maxItems: 1
+
 patternProperties:
   "^.*@[0-9a-f]+$":
     type: object
diff --git a/dts/Bindings/pci/apple,pcie.yaml b/dts/Bindings/pci/apple,pcie.yaml
index ef1d424ec2..7f01e15fc8 100644
--- a/dts/Bindings/pci/apple,pcie.yaml
+++ b/dts/Bindings/pci/apple,pcie.yaml
@@ -28,19 +28,17 @@ description: |
   distributed over the root ports as the OS sees fit by programming
   the PCIe controller's port registers.
 
-allOf:
-  - $ref: /schemas/pci/pci-bus.yaml#
-  - $ref: /schemas/interrupt-controller/msi-controller.yaml#
-
 properties:
   compatible:
     items:
-      - const: apple,t8103-pcie
+      - enum:
+          - apple,t8103-pcie
+          - apple,t6000-pcie
       - const: apple,pcie
 
   reg:
     minItems: 3
-    maxItems: 5
+    maxItems: 6
 
   reg-names:
     minItems: 3
@@ -50,6 +48,7 @@ properties:
       - const: port0
       - const: port1
       - const: port2
+      - const: port3
 
   ranges:
     minItems: 2
@@ -59,7 +58,7 @@ properties:
     description:
       Interrupt specifiers, one for each root port.
     minItems: 1
-    maxItems: 3
+    maxItems: 4
 
   msi-parent: true
 
@@ -81,6 +80,21 @@ required:
 
 unevaluatedProperties: false
 
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+  - $ref: /schemas/interrupt-controller/msi-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: apple,t8103-pcie
+    then:
+      properties:
+        reg:
+          maxItems: 5
+        interrupts:
+          maxItems: 3
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/apple-aic.h>
diff --git a/dts/Bindings/pci/brcm,iproc-pcie.txt b/dts/Bindings/pci/brcm,iproc-pcie.txt
deleted file mode 100644
index df065aa53a..0000000000
--- a/dts/Bindings/pci/brcm,iproc-pcie.txt
+++ /dev/null
@@ -1,133 +0,0 @@
-* Broadcom iProc PCIe controller with the platform bus interface
-
-Required properties:
-- compatible:
-      "brcm,iproc-pcie" for the first generation of PAXB based controller,
-used in SoCs including NSP, Cygnus, NS2, and Pegasus
-      "brcm,iproc-pcie-paxb-v2" for the second generation of PAXB-based
-controllers, used in Stingray
-      "brcm,iproc-pcie-paxc" for the first generation of PAXC based
-controller, used in NS2
-      "brcm,iproc-pcie-paxc-v2" for the second generation of PAXC based
-controller, used in Stingray
-  PAXB-based root complex is used for external endpoint devices. PAXC-based
-root complex is connected to emulated endpoint devices internal to the ASIC
-- reg: base address and length of the PCIe controller I/O register space
-- #interrupt-cells: set to <1>
-- interrupt-map-mask and interrupt-map, standard PCI properties to define the
-  mapping of the PCIe interface to interrupt numbers
-- linux,pci-domain: PCI domain ID. Should be unique for each host controller
-- bus-range: PCI bus numbers covered
-- #address-cells: set to <3>
-- #size-cells: set to <2>
-- device_type: set to "pci"
-- ranges: ranges for the PCI memory and I/O regions
-
-Optional properties:
-- phys: phandle of the PCIe PHY device
-- phy-names: must be "pcie-phy"
-- dma-coherent: present if DMA operations are coherent
-- dma-ranges: Some PAXB-based root complexes do not have inbound mapping done
-  by the ASIC after power on reset.  In this case, SW is required to configure
-the mapping, based on inbound memory regions specified by this property.
-
-- brcm,pcie-ob: Some iProc SoCs do not have the outbound address mapping done
-by the ASIC after power on reset. In this case, SW needs to configure it
-
-If the brcm,pcie-ob property is present, the following properties become
-effective:
-
-Required:
-- brcm,pcie-ob-axi-offset: The offset from the AXI address to the internal
-address used by the iProc PCIe core (not the PCIe address)
-
-MSI support (optional):
-
-For older platforms without MSI integrated in the GIC, iProc PCIe core provides
-an event queue based MSI support.  The iProc MSI uses host memories to store
-MSI posted writes in the event queues
-
-On newer iProc platforms, gicv2m or gicv3-its based MSI support should be used
-
-- msi-map: Maps a Requester ID to an MSI controller and associated MSI
-sideband data
-
-- msi-parent: Link to the device node of the MSI controller, used when no MSI
-sideband data is passed between the iProc PCIe controller and the MSI
-controller
-
-Refer to the following binding documents for more detailed description on
-the use of 'msi-map' and 'msi-parent':
-  Documentation/devicetree/bindings/pci/pci-msi.txt
-  Documentation/devicetree/bindings/interrupt-controller/msi.txt
-
-When the iProc event queue based MSI is used, one needs to define the
-following properties in the MSI device node:
-- compatible: Must be "brcm,iproc-msi"
-- msi-controller: claims itself as an MSI controller
-- interrupts: List of interrupt IDs from its parent interrupt device
-
-Optional properties:
-- brcm,pcie-msi-inten: Needs to be present for some older iProc platforms that
-require the interrupt enable registers to be set explicitly to enable MSI
-
-Example:
-	pcie0: pcie@18012000 {
-		compatible = "brcm,iproc-pcie";
-		reg = <0x18012000 0x1000>;
-
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 0 0>;
-		interrupt-map = <0 0 0 0 &gic GIC_SPI 100 IRQ_TYPE_NONE>;
-
-		linux,pci-domain = <0>;
-
-		bus-range = <0x00 0xff>;
-
-		#address-cells = <3>;
-		#size-cells = <2>;
-		device_type = "pci";
-		ranges = <0x81000000 0 0	  0x28000000 0 0x00010000
-			  0x82000000 0 0x20000000 0x20000000 0 0x04000000>;
-
-		phys = <&phy 0 5>;
-		phy-names = "pcie-phy";
-
-		brcm,pcie-ob;
-		brcm,pcie-ob-axi-offset = <0x00000000>;
-
-		msi-parent = <&msi0>;
-
-		/* iProc event queue based MSI */
-		msi0: msi@18012000 {
-			compatible = "brcm,iproc-msi";
-			msi-controller;
-			interrupt-parent = <&gic>;
-			interrupts = <GIC_SPI 96 IRQ_TYPE_NONE>,
-				     <GIC_SPI 97 IRQ_TYPE_NONE>,
-				     <GIC_SPI 98 IRQ_TYPE_NONE>,
-				     <GIC_SPI 99 IRQ_TYPE_NONE>,
-		};
-	};
-
-	pcie1: pcie@18013000 {
-		compatible = "brcm,iproc-pcie";
-		reg = <0x18013000 0x1000>;
-
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 0 0>;
-		interrupt-map = <0 0 0 0 &gic GIC_SPI 106 IRQ_TYPE_NONE>;
-
-		linux,pci-domain = <1>;
-
-		bus-range = <0x00 0xff>;
-
-		#address-cells = <3>;
-		#size-cells = <2>;
-		device_type = "pci";
-		ranges = <0x81000000 0 0	  0x48000000 0 0x00010000
-			  0x82000000 0 0x40000000 0x40000000 0 0x04000000>;
-
-		phys = <&phy 1 6>;
-		phy-names = "pcie-phy";
-	};
diff --git a/dts/Bindings/pci/brcm,iproc-pcie.yaml b/dts/Bindings/pci/brcm,iproc-pcie.yaml
new file mode 100644
index 0000000000..0972868735
--- /dev/null
+++ b/dts/Bindings/pci/brcm,iproc-pcie.yaml
@@ -0,0 +1,184 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/brcm,iproc-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom iProc PCIe controller with the platform bus interface
+
+maintainers:
+  - Ray Jui <ray.jui@broadcom.com>
+  - Scott Branden <scott.branden@broadcom.com>
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+  - $ref: /schemas/interrupt-controller/msi-controller.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          # for the first generation of PAXB based controller, used in SoCs
+          # including NSP, Cygnus, NS2, and Pegasus
+          - brcm,iproc-pcie
+          # for the second generation of PAXB-based controllers, used in
+          # Stingray
+          - brcm,iproc-pcie-paxb-v2
+          # For the first generation of PAXC based controller, used in NS2
+          - brcm,iproc-pcie-paxc
+          # For the second generation of PAXC based controller, used in Stingray
+          - brcm,iproc-pcie-paxc-v2
+
+  reg:
+    maxItems: 1
+    description: >
+       Base address and length of the PCIe controller I/O register space
+
+  interrupt-map: true
+
+  interrupt-map-mask: true
+
+  "#interrupt-cells":
+    const: 1
+
+  ranges:
+    minItems: 1
+    maxItems: 2
+    description: >
+      Ranges for the PCI memory and I/O regions
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    items:
+      - const: pcie-phy
+
+  bus-range: true
+
+  dma-coherent: true
+
+  "#address-cells": true
+
+  "#size-cells": true
+
+  device_type: true
+
+  brcm,pcie-ob:
+    type: boolean
+    description: >
+      Some iProc SoCs do not have the outbound address mapping done by the
+      ASIC after power on reset. In this case, SW needs to configure it
+
+  brcm,pcie-ob-axi-offset:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: >
+       The offset from the AXI address to the internal address used by the
+       iProc PCIe core (not the PCIe address)
+
+  msi:
+    type: object
+    properties:
+      compatible:
+        items:
+          - const: brcm,iproc-msi
+
+  msi-parent: true
+
+  msi-controller: true
+
+  brcm,pcie-msi-inten:
+    type: boolean
+    description: >
+      Needs to be present for some older iProc platforms that require the
+      interrupt enable registers to be set explicitly to enable MSI
+
+dependencies:
+  brcm,pcie-ob-axi-offset: ["brcm,pcie-ob"]
+  brcm,pcie-msi-inten: [msi-controller]
+
+required:
+  - compatible
+  - reg
+  - ranges
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - brcm,iproc-pcie
+then:
+  required:
+    - interrupt-map
+    - interrupt-map-mask
+
+unevaluatedProperties: false
+
+examples:
+  - |
+   #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+   bus {
+      #address-cells = <1>;
+      #size-cells = <1>;
+           pcie0: pcie@18012000 {
+              compatible = "brcm,iproc-pcie";
+              reg = <0x18012000 0x1000>;
+
+              #interrupt-cells = <1>;
+              interrupt-map-mask = <0 0 0 0>;
+              interrupt-map = <0 0 0 0 &gic GIC_SPI 100 IRQ_TYPE_NONE>;
+
+              linux,pci-domain = <0>;
+
+              bus-range = <0x00 0xff>;
+
+              #address-cells = <3>;
+              #size-cells = <2>;
+              device_type = "pci";
+              ranges = <0x81000000 0 0     0x28000000 0 0x00010000>,
+                   <0x82000000 0 0x20000000 0x20000000 0 0x04000000>;
+
+              phys = <&phy 0 5>;
+              phy-names = "pcie-phy";
+
+              brcm,pcie-ob;
+              brcm,pcie-ob-axi-offset = <0x00000000>;
+
+              msi-parent = <&msi0>;
+
+              /* iProc event queue based MSI */
+              msi0: msi {
+                 compatible = "brcm,iproc-msi";
+                 msi-controller;
+                 interrupt-parent = <&gic>;
+                 interrupts = <GIC_SPI 96 IRQ_TYPE_NONE>,
+                         <GIC_SPI 97 IRQ_TYPE_NONE>,
+                         <GIC_SPI 98 IRQ_TYPE_NONE>,
+                         <GIC_SPI 99 IRQ_TYPE_NONE>;
+              };
+           };
+
+           pcie1: pcie@18013000 {
+              compatible = "brcm,iproc-pcie";
+              reg = <0x18013000 0x1000>;
+
+              #interrupt-cells = <1>;
+              interrupt-map-mask = <0 0 0 0>;
+              interrupt-map = <0 0 0 0 &gic GIC_SPI 106 IRQ_TYPE_NONE>;
+
+              linux,pci-domain = <1>;
+
+              bus-range = <0x00 0xff>;
+
+              #address-cells = <3>;
+              #size-cells = <2>;
+              device_type = "pci";
+              ranges = <0x81000000 0 0     0x48000000 0 0x00010000>,
+                   <0x82000000 0 0x40000000 0x40000000 0 0x04000000>;
+
+              phys = <&phy 1 6>;
+              phy-names = "pcie-phy";
+           };
+    };
diff --git a/dts/Bindings/pci/brcm,stb-pcie.yaml b/dts/Bindings/pci/brcm,stb-pcie.yaml
index 1fe102743f..0f064e4222 100644
--- a/dts/Bindings/pci/brcm,stb-pcie.yaml
+++ b/dts/Bindings/pci/brcm,stb-pcie.yaml
@@ -19,6 +19,8 @@ properties:
           - brcm,bcm7278-pcie # Broadcom 7278 Arm
           - brcm,bcm7216-pcie # Broadcom 7216 Arm
           - brcm,bcm7445-pcie # Broadcom 7445 Arm
+          - brcm,bcm7425-pcie # Broadcom 7425 MIPs
+          - brcm,bcm7435-pcie # Broadcom 7435 MIPs
 
   reg:
     maxItems: 1
@@ -76,6 +78,7 @@ properties:
       maxItems: 3
 
 required:
+  - compatible
   - reg
   - ranges
   - dma-ranges
@@ -143,11 +146,15 @@ examples:
                     #address-cells = <3>;
                     #size-cells = <2>;
                     #interrupt-cells = <1>;
-                    interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+                    interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
                                  <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
                     interrupt-names = "pcie", "msi";
                     interrupt-map-mask = <0x0 0x0 0x0 0x7>;
-                    interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+                    interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH
+                                     0 0 0 2 &gicv2 GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH
+                                     0 0 0 3 &gicv2 GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH
+                                     0 0 0 4 &gicv2 GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+
                     msi-parent = <&pcie0>;
                     msi-controller;
                     ranges = <0x02000000 0x0 0xf8000000 0x6 0x00000000 0x0 0x04000000>;
@@ -155,5 +162,24 @@ examples:
                                  <0x42000000 0x1 0x80000000 0x3 0x00000000 0x0 0x80000000>;
                     brcm,enable-ssc;
                     brcm,scb-sizes =  <0x0000000080000000 0x0000000080000000>;
+
+                    /* PCIe bridge, Root Port */
+                    pci@0,0 {
+                            #address-cells = <3>;
+                            #size-cells = <2>;
+                            reg = <0x0 0x0 0x0 0x0 0x0>;
+                            compatible = "pciclass,0604";
+                            device_type = "pci";
+                            vpcie3v3-supply = <&vreg7>;
+                            ranges;
+
+                            /* PCIe endpoint */
+                            pci-ep@0,0 {
+                                    assigned-addresses =
+                                        <0x82010000 0x0 0xf8000000 0x6 0x00000000 0x0 0x2000>;
+                                    reg = <0x0 0x0 0x0 0x0 0x0>;
+                                    compatible = "pci14e4,1688";
+                            };
+                    };
             };
     };
diff --git a/dts/Bindings/pci/cdns,cdns-pcie-ep.yaml b/dts/Bindings/pci/cdns,cdns-pcie-ep.yaml
index 651eee8898..e6ef1012a5 100644
--- a/dts/Bindings/pci/cdns,cdns-pcie-ep.yaml
+++ b/dts/Bindings/pci/cdns,cdns-pcie-ep.yaml
@@ -11,7 +11,6 @@ maintainers:
 
 allOf:
   - $ref: "cdns-pcie-ep.yaml#"
-  - $ref: "pci-ep.yaml#"
 
 properties:
   compatible:
diff --git a/dts/Bindings/pci/cdns-pcie-ep.yaml b/dts/Bindings/pci/cdns-pcie-ep.yaml
index 21e8a88490..baeafda36e 100644
--- a/dts/Bindings/pci/cdns-pcie-ep.yaml
+++ b/dts/Bindings/pci/cdns-pcie-ep.yaml
@@ -11,6 +11,7 @@ maintainers:
 
 allOf:
   - $ref: "cdns-pcie.yaml#"
+  - $ref: "pci-ep.yaml#"
 
 properties:
   cdns,max-outbound-regions:
diff --git a/dts/Bindings/pci/fsl,imx6q-pcie.yaml b/dts/Bindings/pci/fsl,imx6q-pcie.yaml
index acea1cd444..643a6333b0 100644
--- a/dts/Bindings/pci/fsl,imx6q-pcie.yaml
+++ b/dts/Bindings/pci/fsl,imx6q-pcie.yaml
@@ -127,6 +127,12 @@ properties:
     enum: [1, 2, 3, 4]
     default: 1
 
+  phys:
+    maxItems: 1
+
+  phy-names:
+    const: pcie-phy
+
   reset-gpio:
     description: Should specify the GPIO for controlling the PCI bus device
       reset signal. It's not polarity aware and defaults to active-low reset
diff --git a/dts/Bindings/pci/hisilicon,kirin-pcie.yaml b/dts/Bindings/pci/hisilicon,kirin-pcie.yaml
index cbee878025..c9f04999c9 100644
--- a/dts/Bindings/pci/hisilicon,kirin-pcie.yaml
+++ b/dts/Bindings/pci/hisilicon,kirin-pcie.yaml
@@ -37,6 +37,19 @@ properties:
     minItems: 3
     maxItems: 4
 
+  clocks: true
+
+  clock-names:
+    items:
+      - const: pcie_phy_ref
+      - const: pcie_aux
+      - const: pcie_apb_phy
+      - const: pcie_apb_sys
+      - const: pcie_aclk
+
+  phys:
+    maxItems: 1
+
   hisilicon,clken-gpios:
     description: |
       Clock input enablement GPIOs from PCI devices like Ethernet, M.2 and
diff --git a/dts/Bindings/pci/mediatek,mt7621-pcie.yaml b/dts/Bindings/pci/mediatek,mt7621-pcie.yaml
index 044fa967bc..d60f43fd9c 100644
--- a/dts/Bindings/pci/mediatek,mt7621-pcie.yaml
+++ b/dts/Bindings/pci/mediatek,mt7621-pcie.yaml
@@ -45,6 +45,9 @@ patternProperties:
       phys:
         maxItems: 1
 
+      phy-names:
+        pattern: '^pcie-phy[0-2]$'
+
     required:
       - "#interrupt-cells"
       - interrupt-map-mask
diff --git a/dts/Bindings/pci/mediatek-pcie-gen3.yaml b/dts/Bindings/pci/mediatek-pcie-gen3.yaml
index 742206dbd9..0499b94627 100644
--- a/dts/Bindings/pci/mediatek-pcie-gen3.yaml
+++ b/dts/Bindings/pci/mediatek-pcie-gen3.yaml
@@ -95,6 +95,10 @@ properties:
   phys:
     maxItems: 1
 
+  phy-names:
+    items:
+      - const: pcie-phy
+
   '#interrupt-cells':
     const: 1
 
diff --git a/dts/Bindings/pci/microchip,pcie-host.yaml b/dts/Bindings/pci/microchip,pcie-host.yaml
index 7b07764571..edb4f81253 100644
--- a/dts/Bindings/pci/microchip,pcie-host.yaml
+++ b/dts/Bindings/pci/microchip,pcie-host.yaml
@@ -46,6 +46,24 @@ properties:
   msi-parent:
     description: MSI controller the device is capable of using.
 
+  interrupt-controller:
+    type: object
+    properties:
+      '#address-cells':
+        const: 0
+
+      '#interrupt-cells':
+        const: 1
+
+      interrupt-controller: true
+
+    required:
+      - '#address-cells'
+      - '#interrupt-cells'
+      - interrupt-controller
+
+    additionalProperties: false
+
 required:
   - reg
   - reg-names
diff --git a/dts/Bindings/pci/sifive,fu740-pcie.yaml b/dts/Bindings/pci/sifive,fu740-pcie.yaml
index 2b9d1d6fc6..392f0ab488 100644
--- a/dts/Bindings/pci/sifive,fu740-pcie.yaml
+++ b/dts/Bindings/pci/sifive,fu740-pcie.yaml
@@ -32,6 +32,8 @@ properties:
       - const: config
       - const: mgmt
 
+  dma-coherent: true
+
   num-lanes:
     const: 8
 
@@ -61,10 +63,8 @@ required:
   - num-lanes
   - interrupts
   - interrupt-names
-  - interrupt-parent
   - interrupt-map-mask
   - interrupt-map
-  - clock-names
   - clocks
   - resets
   - pwren-gpios
@@ -104,7 +104,6 @@ examples:
                             <0x0 0x0 0x0 0x2 &plic0 58>,
                             <0x0 0x0 0x0 0x3 &plic0 59>,
                             <0x0 0x0 0x0 0x4 &plic0 60>;
-            clock-names = "pcie_aux";
             clocks = <&prci PRCI_CLK_PCIE_AUX>;
             resets = <&prci 4>;
             pwren-gpios = <&gpio 5 0>;
diff --git a/dts/Bindings/pci/snps,dw-pcie-ep.yaml b/dts/Bindings/pci/snps,dw-pcie-ep.yaml
index b5935b1b15..e59059ab5b 100644
--- a/dts/Bindings/pci/snps,dw-pcie-ep.yaml
+++ b/dts/Bindings/pci/snps,dw-pcie-ep.yaml
@@ -64,16 +64,12 @@ properties:
     maxItems: 1
     deprecated: true
 
-  max-functions:
-    $ref: /schemas/types.yaml#/definitions/uint32
-    description: maximum number of functions that can be configured
-
 required:
   - reg
   - reg-names
   - compatible
 
-unevaluatedProperties: false
+additionalProperties: true
 
 examples:
   - |
diff --git a/dts/Bindings/pci/snps,dw-pcie.yaml b/dts/Bindings/pci/snps,dw-pcie.yaml
index 9ed0dfba7f..a5345c4947 100644
--- a/dts/Bindings/pci/snps,dw-pcie.yaml
+++ b/dts/Bindings/pci/snps,dw-pcie.yaml
@@ -73,7 +73,7 @@ properties:
       does not specify it, the driver autodetects it.
     deprecated: true
 
-unevaluatedProperties: false
+additionalProperties: true
 
 required:
   - reg
diff --git a/dts/Bindings/pci/socionext,uniphier-pcie-ep.yaml b/dts/Bindings/pci/socionext,uniphier-pcie-ep.yaml
index 144cbcd60a..179ab08584 100644
--- a/dts/Bindings/pci/socionext,uniphier-pcie-ep.yaml
+++ b/dts/Bindings/pci/socionext,uniphier-pcie-ep.yaml
@@ -79,7 +79,7 @@ required:
   - resets
   - reset-names
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/dts/Bindings/pci/ti,am65-pci-ep.yaml b/dts/Bindings/pci/ti,am65-pci-ep.yaml
index 78c217d362..74195c1f52 100644
--- a/dts/Bindings/pci/ti,am65-pci-ep.yaml
+++ b/dts/Bindings/pci/ti,am65-pci-ep.yaml
@@ -32,8 +32,12 @@ properties:
     maxItems: 1
 
   ti,syscon-pcie-mode:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: Phandle to the SYSCON entry
+          - description: pcie_ctrl register offset within SYSCON
     description: Phandle to the SYSCON entry required for configuring PCIe in RC or EP mode.
-    $ref: /schemas/types.yaml#/definitions/phandle
 
   interrupts:
     minItems: 1
@@ -65,9 +69,7 @@ examples:
                <0x5506000 0x1000>;
         reg-names = "app", "dbics", "addr_space", "atu";
         power-domains = <&k3_pds 120 TI_SCI_PD_EXCLUSIVE>;
-        ti,syscon-pcie-mode = <&pcie0_mode>;
-        num-ib-windows = <16>;
-        num-ob-windows = <16>;
+        ti,syscon-pcie-mode = <&scm_conf 0x4060>;
         max-link-speed = <2>;
         dma-coherent;
         interrupts = <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>;
diff --git a/dts/Bindings/pci/ti,am65-pci-host.yaml b/dts/Bindings/pci/ti,am65-pci-host.yaml
index 834dc1c174..a20dccbafd 100644
--- a/dts/Bindings/pci/ti,am65-pci-host.yaml
+++ b/dts/Bindings/pci/ti,am65-pci-host.yaml
@@ -29,16 +29,27 @@ properties:
       - const: config
       - const: atu
 
+  interrupts:
+    maxItems: 1
+
   power-domains:
     maxItems: 1
 
   ti,syscon-pcie-id:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: Phandle to the SYSCON entry
+          - description: pcie_device_id register offset within SYSCON
     description: Phandle to the SYSCON entry required for getting PCIe device/vendor ID
-    $ref: /schemas/types.yaml#/definitions/phandle
 
   ti,syscon-pcie-mode:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: Phandle to the SYSCON entry
+          - description: pcie_ctrl register offset within SYSCON
     description: Phandle to the SYSCON entry required for configuring PCIe in RC or EP mode.
-    $ref: /schemas/types.yaml#/definitions/phandle
 
   msi-map: true
 
@@ -84,10 +95,9 @@ examples:
         #size-cells = <2>;
         ranges = <0x81000000 0 0          0x10020000 0 0x00010000>,
                  <0x82000000 0 0x10030000 0x10030000 0 0x07FD0000>;
-        ti,syscon-pcie-id = <&pcie_devid>;
-        ti,syscon-pcie-mode = <&pcie0_mode>;
+        ti,syscon-pcie-id = <&scm_conf 0x0210>;
+        ti,syscon-pcie-mode = <&scm_conf 0x4060>;
         bus-range = <0x0 0xff>;
-        num-viewport = <16>;
         max-link-speed = <2>;
         dma-coherent;
         interrupts = <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>;
diff --git a/dts/Bindings/pci/ti,j721e-pci-host.yaml b/dts/Bindings/pci/ti,j721e-pci-host.yaml
index cc900202df..2115d5a3f0 100644
--- a/dts/Bindings/pci/ti,j721e-pci-host.yaml
+++ b/dts/Bindings/pci/ti,j721e-pci-host.yaml
@@ -60,6 +60,8 @@ properties:
       - const: fck
       - const: pcie_refclk
 
+  dma-coherent: true
+
   vendor-id:
     const: 0x104c
 
diff --git a/dts/Bindings/pci/xilinx-versal-cpm.yaml b/dts/Bindings/pci/xilinx-versal-cpm.yaml
index a2bbc0eb72..32f4641085 100644
--- a/dts/Bindings/pci/xilinx-versal-cpm.yaml
+++ b/dts/Bindings/pci/xilinx-versal-cpm.yaml
@@ -55,7 +55,6 @@ required:
   - reg-names
   - "#interrupt-cells"
   - interrupts
-  - interrupt-parent
   - interrupt-map
   - interrupt-map-mask
   - bus-range
diff --git a/dts/Bindings/perf/arm,cmn.yaml b/dts/Bindings/perf/arm,cmn.yaml
index 42424ccbdd..2d4219ec7e 100644
--- a/dts/Bindings/perf/arm,cmn.yaml
+++ b/dts/Bindings/perf/arm,cmn.yaml
@@ -12,12 +12,14 @@ maintainers:
 
 properties:
   compatible:
-    const: arm,cmn-600
+    enum:
+      - arm,cmn-600
+      - arm,ci-700
 
   reg:
     items:
       - description: Physical address of the base (PERIPHBASE) and
-          size (up to 64MB) of the configuration address space.
+          size of the configuration address space.
 
   interrupts:
     minItems: 1
@@ -31,14 +33,23 @@ properties:
 
   arm,root-node:
     $ref: /schemas/types.yaml#/definitions/uint32
-    description: Offset from PERIPHBASE of the configuration
-      discovery node (see TRM definition of ROOTNODEBASE).
+    description: Offset from PERIPHBASE of CMN-600's configuration
+      discovery node (see TRM definition of ROOTNODEBASE). Not
+      relevant for newer CMN/CI products.
 
 required:
   - compatible
   - reg
   - interrupts
-  - arm,root-node
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: arm,cmn-600
+then:
+  required:
+    - arm,root-node
 
 additionalProperties: false
 
diff --git a/dts/Bindings/perf/arm,dsu-pmu.yaml b/dts/Bindings/perf/arm,dsu-pmu.yaml
new file mode 100644
index 0000000000..aef63a542f
--- /dev/null
+++ b/dts/Bindings/perf/arm,dsu-pmu.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2021 Arm Ltd.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/perf/arm,dsu-pmu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM DynamIQ Shared Unit (DSU) Performance Monitor Unit (PMU)
+
+maintainers:
+  - Suzuki K Poulose <suzuki.poulose@arm.com>
+  - Robin Murphy <robin.murphy@arm.com>
+
+description:
+  ARM DynamIQ Shared Unit (DSU) integrates one or more CPU cores with a shared
+  L3 memory system, control logic and external interfaces to form a multicore
+  cluster. The PMU enables gathering various statistics on the operation of the
+  DSU. The PMU provides independent 32-bit counters that can count any of the
+  supported events, along with a 64-bit cycle counter. The PMU is accessed via
+  CPU system registers and has no MMIO component.
+
+properties:
+  compatible:
+    oneOf:
+      - const: arm,dsu-pmu
+      - items:
+          - const: arm,dsu-110-pmu
+          - const: arm,dsu-pmu
+
+  interrupts:
+    items:
+      - description: nCLUSTERPMUIRQ interrupt
+
+  cpus:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    minItems: 1
+    maxItems: 12
+    description: List of phandles for the CPUs connected to this DSU instance.
+
+required:
+  - compatible
+  - interrupts
+  - cpus
+
+additionalProperties: false
diff --git a/dts/Bindings/perf/arm,smmu-v3-pmcg.yaml b/dts/Bindings/perf/arm,smmu-v3-pmcg.yaml
new file mode 100644
index 0000000000..a4b53a6a1e
--- /dev/null
+++ b/dts/Bindings/perf/arm,smmu-v3-pmcg.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/perf/arm,smmu-v3-pmcg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm SMMUv3 Performance Monitor Counter Group
+
+maintainers:
+  - Will Deacon <will@kernel.org>
+  - Robin Murphy <robin.murphy@arm.com>
+
+description: |
+  An SMMUv3 may have several Performance Monitor Counter Group (PMCG).
+  They are standalone performance monitoring units that support both
+  architected and IMPLEMENTATION DEFINED event counters.
+
+properties:
+  $nodename:
+    pattern: "^pmu@[0-9a-f]*"
+  compatible:
+    oneOf:
+      - items:
+          - const: arm,mmu-600-pmcg
+          - const: arm,smmu-v3-pmcg
+      - const: arm,smmu-v3-pmcg
+
+  reg:
+    items:
+      - description: Register page 0
+      - description: Register page 1, if SMMU_PMCG_CFGR.RELOC_CTRS = 1
+    minItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  msi-parent: true
+
+required:
+  - compatible
+  - reg
+
+anyOf:
+  - required:
+      - interrupts
+  - required:
+      - msi-parent
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    pmu@2b420000 {
+            compatible = "arm,smmu-v3-pmcg";
+            reg = <0x2b420000 0x1000>,
+                  <0x2b430000 0x1000>;
+            interrupts = <GIC_SPI 80 IRQ_TYPE_EDGE_RISING>;
+            msi-parent = <&its 0xff0000>;
+    };
+
+    pmu@2b440000 {
+            compatible = "arm,smmu-v3-pmcg";
+            reg = <0x2b440000 0x1000>,
+                  <0x2b450000 0x1000>;
+            interrupts = <GIC_SPI 81 IRQ_TYPE_EDGE_RISING>;
+            msi-parent = <&its 0xff0000>;
+    };
diff --git a/dts/Bindings/perf/marvell-cn10k-tad.yaml b/dts/Bindings/perf/marvell-cn10k-tad.yaml
new file mode 100644
index 0000000000..3621422526
--- /dev/null
+++ b/dts/Bindings/perf/marvell-cn10k-tad.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/perf/marvell-cn10k-tad.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell CN10K LLC-TAD performance monitor
+
+maintainers:
+  - Bhaskara Budiredla <bbudiredla@marvell.com>
+
+description: |
+  The Tag-and-Data units (TADs) maintain coherence and contain CN10K
+  shared on-chip last level cache (LLC). The tad pmu measures the
+  performance of last-level cache. Each tad pmu supports up to eight
+  counters.
+
+  The DT setup comprises of number of tad blocks, the sizes of pmu
+  regions, tad blocks and overall base address of the HW.
+
+properties:
+  compatible:
+    const: marvell,cn10k-tad-pmu
+
+  reg:
+    maxItems: 1
+
+  marvell,tad-cnt:
+    description: specifies the number of tads on the soc
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  marvell,tad-page-size:
+    description: specifies the size of each tad page
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  marvell,tad-pmu-page-size:
+    description: specifies the size of page that the pmu uses
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+  - compatible
+  - reg
+  - marvell,tad-cnt
+  - marvell,tad-page-size
+  - marvell,tad-pmu-page-size
+
+additionalProperties: false
+
+examples:
+  - |
+
+    tad {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        tad_pmu@80000000 {
+            compatible = "marvell,cn10k-tad-pmu";
+            reg = <0x87e2 0x80000000 0x0 0x1000>;
+            marvell,tad-cnt = <1>;
+            marvell,tad-page-size = <0x1000>;
+            marvell,tad-pmu-page-size = <0x1000>;
+        };
+    };
diff --git a/dts/Bindings/phy/amlogic,meson8-hdmi-tx-phy.yaml b/dts/Bindings/phy/amlogic,meson8-hdmi-tx-phy.yaml
new file mode 100644
index 0000000000..1f085cdd1c
--- /dev/null
+++ b/dts/Bindings/phy/amlogic,meson8-hdmi-tx-phy.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/phy/amlogic,meson8-hdmi-tx-phy.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Amlogic Meson8, Meson8b and Meson8m2 HDMI TX PHY
+
+maintainers:
+  - Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+
+description: |+
+  The HDMI TX PHY node should be the child of a syscon node with the
+  required property:
+
+  compatible = "amlogic,meson-hhi-sysctrl", "simple-mfd", "syscon"
+
+  Refer to the bindings described in
+  Documentation/devicetree/bindings/mfd/syscon.yaml
+
+properties:
+  $nodename:
+    pattern: "^hdmi-phy@[0-9a-f]+$"
+
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - amlogic,meson8b-hdmi-tx-phy
+              - amlogic,meson8m2-hdmi-tx-phy
+          - const: amlogic,meson8-hdmi-tx-phy
+      - const: amlogic,meson8-hdmi-tx-phy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    description:
+      HDMI TMDS clock
+
+  "#phy-cells":
+    const: 0
+
+required:
+  - compatible
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    hdmi-phy@3a0 {
+      compatible = "amlogic,meson8-hdmi-tx-phy";
+      reg = <0x3a0 0xc>;
+      clocks = <&tmds_clock>;
+      #phy-cells = <0>;
+    };
+  - |
+    hdmi-phy@3a0 {
+      compatible = "amlogic,meson8b-hdmi-tx-phy", "amlogic,meson8-hdmi-tx-phy";
+      reg = <0x3a0 0xc>;
+      clocks = <&tmds_clock>;
+      #phy-cells = <0>;
+    };
diff --git a/dts/Bindings/phy/brcm,cygnus-pcie-phy.txt b/dts/Bindings/phy/brcm,cygnus-pcie-phy.txt
deleted file mode 100644
index 10efff28b5..0000000000
--- a/dts/Bindings/phy/brcm,cygnus-pcie-phy.txt
+++ /dev/null
@@ -1,47 +0,0 @@
-Broadcom Cygnus PCIe PHY
-
-Required properties:
-- compatible: must be "brcm,cygnus-pcie-phy"
-- reg: base address and length of the PCIe PHY block
-- #address-cells: must be 1
-- #size-cells: must be 0
-
-Each PCIe PHY should be represented by a child node
-
-Required properties For the child node:
-- reg: the PHY ID
-0 - PCIe RC 0
-1 - PCIe RC 1
-- #phy-cells: must be 0
-
-Example:
-	pcie_phy: phy@301d0a0 {
-		compatible = "brcm,cygnus-pcie-phy";
-		reg = <0x0301d0a0 0x14>;
-
-		pcie0_phy: phy@0 {
-			reg = <0>;
-			#phy-cells = <0>;
-		};
-
-		pcie1_phy: phy@1 {
-			reg = <1>;
-			#phy-cells = <0>;
-		};
-	};
-
-	/* users of the PCIe phy */
-
-	pcie0: pcie@18012000 {
-		...
-		...
-		phys = <&pcie0_phy>;
-		phy-names = "pcie-phy";
-	};
-
-	pcie1: pcie@18013000 {
-		...
-		...
-		phys = <pcie1_phy>;
-		phy-names = "pcie-phy";
-	};
diff --git a/dts/Bindings/phy/brcm,cygnus-pcie-phy.yaml b/dts/Bindings/phy/brcm,cygnus-pcie-phy.yaml
new file mode 100644
index 0000000000..045699c657
--- /dev/null
+++ b/dts/Bindings/phy/brcm,cygnus-pcie-phy.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/brcm,cygnus-pcie-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Cygnus PCIe PHY
+
+maintainers:
+  - Ray Jui <ray.jui@broadcom.com>
+  - Scott Branden <scott.branden@broadcom.com>
+
+properties:
+  $nodename:
+    pattern: "^pcie[-|_]phy(@.*)?$"
+
+  compatible:
+    items:
+      - const: brcm,cygnus-pcie-phy
+
+  reg:
+    maxItems: 1
+    description: >
+      Base address and length of the PCIe PHY block
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^pcie-phy@[0-9]+$":
+    type: object
+    description: >
+      PCIe PHY child nodes
+
+    properties:
+      reg:
+        maxItems: 1
+        description: >
+          The PCIe PHY port number
+
+      "#phy-cells":
+        const: 0
+
+    required:
+      - reg
+      - "#phy-cells"
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    pcie_phy: pcie_phy@301d0a0 {
+      compatible = "brcm,cygnus-pcie-phy";
+      reg = <0x0301d0a0 0x14>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      pcie0_phy: pcie-phy@0 {
+          reg = <0>;
+          #phy-cells = <0>;
+      };
+
+      pcie1_phy: pcie-phy@1 {
+          reg = <1>;
+          #phy-cells = <0>;
+      };
+    };
diff --git a/dts/Bindings/phy/brcm,mdio-mux-bus-pci.txt b/dts/Bindings/phy/brcm,mdio-mux-bus-pci.txt
deleted file mode 100644
index 5b51007c6f..0000000000
--- a/dts/Bindings/phy/brcm,mdio-mux-bus-pci.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-* Broadcom NS2 PCIe PHY binding document
-
-Required bus properties:
-- reg: MDIO Bus number for the MDIO interface
-- #address-cells: must be 1
-- #size-cells: must be 0
-
-Required PHY properties:
-- compatible: should be "brcm,ns2-pcie-phy"
-- reg: MDIO Phy ID for the MDIO interface
-- #phy-cells: must be 0
-
-This is a child bus node of "brcm,mdio-mux-iproc" node.
-
-Example:
-
-mdio@0 {
-	reg = <0x0>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	pci_phy0: pci-phy@0 {
-		compatible = "brcm,ns2-pcie-phy";
-		reg = <0x0>;
-		#phy-cells = <0>;
-	};
-};
diff --git a/dts/Bindings/phy/brcm,ns2-pcie-phy.yaml b/dts/Bindings/phy/brcm,ns2-pcie-phy.yaml
new file mode 100644
index 0000000000..70eb48b391
--- /dev/null
+++ b/dts/Bindings/phy/brcm,ns2-pcie-phy.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/brcm,ns2-pcie-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom NS2 PCIe PHY binding document
+
+maintainers:
+  - Ray Jui <ray.jui@broadcom.com>
+  - Scott Branden <scott.branden@broadcom.com>
+
+properties:
+  compatible:
+    const: brcm,ns2-pcie-phy
+
+  reg:
+    maxItems: 1
+
+  "#phy-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    mdio {
+       #address-cells = <1>;
+       #size-cells = <0>;
+
+       pci-phy@0 {
+          compatible = "brcm,ns2-pcie-phy";
+          reg = <0x0>;
+          #phy-cells = <0>;
+       };
+    };
diff --git a/dts/Bindings/phy/fsl,imx8-pcie-phy.yaml b/dts/Bindings/phy/fsl,imx8-pcie-phy.yaml
new file mode 100644
index 0000000000..b6421eedec
--- /dev/null
+++ b/dts/Bindings/phy/fsl,imx8-pcie-phy.yaml
@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/fsl,imx8-pcie-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8 SoC series PCIe PHY Device Tree Bindings
+
+maintainers:
+  - Richard Zhu <hongxing.zhu@nxp.com>
+
+properties:
+  "#phy-cells":
+    const: 0
+
+  compatible:
+    enum:
+      - fsl,imx8mm-pcie-phy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: ref
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: pciephy
+
+  fsl,refclk-pad-mode:
+    description: |
+      Specifies the mode of the refclk pad used. It can be UNUSED(PHY
+      refclock is derived from SoC internal source), INPUT(PHY refclock
+      is provided externally via the refclk pad) or OUTPUT(PHY refclock
+      is derived from SoC internal source and provided on the refclk pad).
+      Refer include/dt-bindings/phy/phy-imx8-pcie.h for the constants
+      to be used.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 0, 1, 2 ]
+
+  fsl,tx-deemph-gen1:
+    description: Gen1 De-emphasis value (optional).
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0
+
+  fsl,tx-deemph-gen2:
+    description: Gen2 De-emphasis value (optional).
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0
+
+  fsl,clkreq-unsupported:
+    type: boolean
+    description: A boolean property indicating the CLKREQ# signal is
+      not supported in the board design (optional)
+
+required:
+  - "#phy-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - fsl,refclk-pad-mode
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8mm-clock.h>
+    #include <dt-bindings/phy/phy-imx8-pcie.h>
+    #include <dt-bindings/reset/imx8mq-reset.h>
+
+    pcie_phy: pcie-phy@32f00000 {
+            compatible = "fsl,imx8mm-pcie-phy";
+            reg = <0x32f00000 0x10000>;
+            clocks = <&clk IMX8MM_CLK_PCIE1_PHY>;
+            clock-names = "ref";
+            assigned-clocks = <&clk IMX8MM_CLK_PCIE1_PHY>;
+            assigned-clock-rates = <100000000>;
+            assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_100M>;
+            resets = <&src IMX8MQ_RESET_PCIEPHY>;
+            reset-names = "pciephy";
+            fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+            #phy-cells = <0>;
+    };
+...
diff --git a/dts/Bindings/phy/intel,phy-thunderbay-emmc.yaml b/dts/Bindings/phy/intel,phy-thunderbay-emmc.yaml
new file mode 100644
index 0000000000..34bdb5c4ca
--- /dev/null
+++ b/dts/Bindings/phy/intel,phy-thunderbay-emmc.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/intel,phy-thunderbay-emmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel Thunder Bay eMMC PHY bindings
+
+maintainers:
+  - Srikandan Nandhini <nandhini.srikandan@intel.com>
+
+properties:
+  compatible:
+    const: intel,thunderbay-emmc-phy
+
+  "#phy-cells":
+    const: 0
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: emmcclk
+
+required:
+  - "#phy-cells"
+  - compatible
+  - reg
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+     mmc_phy@80440800 {
+     #phy-cells = <0x0>;
+     compatible = "intel,thunderbay-emmc-phy";
+     status = "okay";
+     reg = <0x80440800 0x100>;
+     clocks = <&emmc>;
+     clock-names = "emmcclk";
+     };
diff --git a/dts/Bindings/phy/mediatek,tphy.yaml b/dts/Bindings/phy/mediatek,tphy.yaml
index 9e6c0f43f1..05ee274b4b 100644
--- a/dts/Bindings/phy/mediatek,tphy.yaml
+++ b/dts/Bindings/phy/mediatek,tphy.yaml
@@ -160,6 +160,24 @@ patternProperties:
                 - PHY_TYPE_PCIE
                 - PHY_TYPE_SATA
 
+      nvmem-cells:
+        items:
+          - description: internal R efuse for U2 PHY or U3/PCIe PHY
+          - description: rx_imp_sel efuse for U3/PCIe PHY
+          - description: tx_imp_sel efuse for U3/PCIe PHY
+        description: |
+          Phandles to nvmem cell that contains the efuse data;
+          Available only for U2 PHY or U3/PCIe PHY of version 2/3, these
+          three items should be provided at the same time for U3/PCIe PHY,
+          when use software to load efuse;
+          If unspecified, will use hardware auto-load efuse.
+
+      nvmem-cell-names:
+        items:
+          - const: intr
+          - const: rx_imp
+          - const: tx_imp
+
       # The following optional vendor properties are only for debug or HQA test
       mediatek,eye-src:
         description:
diff --git a/dts/Bindings/phy/microchip,lan966x-serdes.yaml b/dts/Bindings/phy/microchip,lan966x-serdes.yaml
new file mode 100644
index 0000000000..6e914fbbac
--- /dev/null
+++ b/dts/Bindings/phy/microchip,lan966x-serdes.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/microchip,lan966x-serdes.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip Lan966x Serdes controller
+
+maintainers:
+  - Horatiu Vultur <horatiu.vultur@microchip.com>
+
+description: |
+  Lan966x has 7 interfaces, consisting of 2 copper transceivers(CU),
+  3 SERDES6G and 2 RGMII interfaces. Two of the SERDES6G support QSGMII.
+  Also it has 8 logical Ethernet ports which can be connected to these
+  interfaces. The Serdes controller will allow to configure these interfaces
+  and allows to "mux" the interfaces to different ports.
+
+  For simple selection of the interface that is used with a port, the
+  following macros are defined CU(X), SERDES6G(X), RGMII(X). Where X is a
+  number that represents the index of that interface type. For example
+  CU(1) means use interface copper transceivers 1. SERDES6G(2) means use
+  interface SerDes 2.
+
+properties:
+  $nodename:
+    pattern: "^serdes@[0-9a-f]+$"
+
+  compatible:
+    const: microchip,lan966x-serdes
+
+  reg:
+    items:
+      - description: HSIO registers
+      - description: HW_STAT register
+
+  '#phy-cells':
+    const: 2
+    description: |
+      - Input port to use for a given macro.
+      - The macro to be used. The macros are defined in
+        dt-bindings/phy/phy-lan966x-serdes.
+
+required:
+  - compatible
+  - reg
+  - '#phy-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    serdes: serdes@e2004010 {
+      compatible = "microchip,lan966x-serdes";
+      reg = <0xe202c000 0x9c>, <0xe2004010 0x4>;
+      #phy-cells = <2>;
+    };
+
+...
diff --git a/dts/Bindings/phy/phy-cadence-sierra.yaml b/dts/Bindings/phy/phy-cadence-sierra.yaml
index e71b32c9c0..a9e227d8b0 100644
--- a/dts/Bindings/phy/phy-cadence-sierra.yaml
+++ b/dts/Bindings/phy/phy-cadence-sierra.yaml
@@ -113,6 +113,15 @@ patternProperties:
         minimum: 1
         maximum: 16
 
+      cdns,ssc-mode:
+        description:
+          Specifies the Spread Spectrum Clocking mode used. It can be NO_SSC,
+          EXTERNAL_SSC or INTERNAL_SSC.
+          Refer include/dt-bindings/phy/phy-cadence.h for the constants to be used.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2]
+        default: 1
+
     required:
       - reg
       - resets
diff --git a/dts/Bindings/phy/phy-cadence-torrent.yaml b/dts/Bindings/phy/phy-cadence-torrent.yaml
index bd9ae11c99..2fec9e54ad 100644
--- a/dts/Bindings/phy/phy-cadence-torrent.yaml
+++ b/dts/Bindings/phy/phy-cadence-torrent.yaml
@@ -202,7 +202,7 @@ examples:
                 #phy-cells = <0>;
                 cdns,phy-type = <PHY_TYPE_PCIE>;
                 cdns,num-lanes = <2>;
-                cdns,ssc-mode = <TORRENT_SERDES_NO_SSC>;
+                cdns,ssc-mode = <CDNS_SERDES_NO_SSC>;
             };
 
             phy@2 {
@@ -211,7 +211,7 @@ examples:
                 #phy-cells = <0>;
                 cdns,phy-type = <PHY_TYPE_SGMII>;
                 cdns,num-lanes = <1>;
-                cdns,ssc-mode = <TORRENT_SERDES_NO_SSC>;
+                cdns,ssc-mode = <CDNS_SERDES_NO_SSC>;
             };
         };
     };
diff --git a/dts/Bindings/phy/phy-rockchip-inno-usb2.yaml b/dts/Bindings/phy/phy-rockchip-inno-usb2.yaml
index 5bebd86bf8..4b75289735 100644
--- a/dts/Bindings/phy/phy-rockchip-inno-usb2.yaml
+++ b/dts/Bindings/phy/phy-rockchip-inno-usb2.yaml
@@ -18,6 +18,7 @@ properties:
       - rockchip,rk3328-usb2phy
       - rockchip,rk3366-usb2phy
       - rockchip,rk3399-usb2phy
+      - rockchip,rk3568-usb2phy
       - rockchip,rv1108-usb2phy
 
   reg:
@@ -50,6 +51,10 @@ properties:
     description:
       Phandle to the extcon device providing the cable state for the otg phy.
 
+  interrupts:
+    description: Muxed interrupt for both ports
+    maxItems: 1
+
   rockchip,usbgrf:
     $ref: /schemas/types.yaml#/definitions/phandle
     description:
@@ -67,6 +72,7 @@ properties:
 
       interrupts:
         description: host linestate interrupt
+        maxItems: 1
 
       interrupt-names:
         const: linestate
@@ -78,8 +84,6 @@ properties:
 
     required:
       - "#phy-cells"
-      - interrupts
-      - interrupt-names
 
   otg-port:
     type: object
@@ -109,8 +113,6 @@ properties:
 
     required:
       - "#phy-cells"
-      - interrupts
-      - interrupt-names
 
 required:
   - compatible
@@ -120,6 +122,40 @@ required:
   - host-port
   - otg-port
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3568-usb2phy
+
+    then:
+      properties:
+        host-port:
+          properties:
+            interrupts: false
+
+        otg-port:
+          properties:
+            interrupts: false
+
+      required:
+        - interrupts
+
+    else:
+      properties:
+        interrupts: false
+
+        host-port:
+          required:
+            - interrupts
+            - interrupt-names
+
+        otg-port:
+          required:
+            - interrupts
+            - interrupt-names
+
 additionalProperties: false
 
 examples:
diff --git a/dts/Bindings/phy/phy-tegra194-p2u.txt b/dts/Bindings/phy/phy-tegra194-p2u.txt
deleted file mode 100644
index d23ff90baa..0000000000
--- a/dts/Bindings/phy/phy-tegra194-p2u.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-NVIDIA Tegra194 P2U binding
-
-Tegra194 has two PHY bricks namely HSIO (High Speed IO) and NVHS (NVIDIA High
-Speed) each interfacing with 12 and 8 P2U instances respectively.
-A P2U instance is a glue logic between Synopsys DesignWare Core PCIe IP's PIPE
-interface and PHY of HSIO/NVHS bricks. Each P2U instance represents one PCIe
-lane.
-
-Required properties:
-- compatible: For Tegra19x, must contain "nvidia,tegra194-p2u".
-- reg: Should be the physical address space and length of respective each P2U
-       instance.
-- reg-names: Must include the entry "ctl".
-
-Required properties for PHY port node:
-- #phy-cells: Defined by generic PHY bindings.  Must be 0.
-
-Refer to phy/phy-bindings.txt for the generic PHY binding properties.
-
-Example:
-
-p2u_hsio_0: phy@3e10000 {
-	compatible = "nvidia,tegra194-p2u";
-	reg = <0x03e10000 0x10000>;
-	reg-names = "ctl";
-
-	#phy-cells = <0>;
-};
diff --git a/dts/Bindings/phy/phy-tegra194-p2u.yaml b/dts/Bindings/phy/phy-tegra194-p2u.yaml
new file mode 100644
index 0000000000..9a89d05efb
--- /dev/null
+++ b/dts/Bindings/phy/phy-tegra194-p2u.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/phy/phy-tegra194-p2u.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: NVIDIA Tegra194 P2U binding
+
+maintainers:
+  - Thierry Reding <treding@nvidia.com>
+
+description: >
+  Tegra194 has two PHY bricks namely HSIO (High Speed IO) and NVHS (NVIDIA High
+  Speed) each interfacing with 12 and 8 P2U instances respectively.
+  A P2U instance is a glue logic between Synopsys DesignWare Core PCIe IP's PIPE
+  interface and PHY of HSIO/NVHS bricks. Each P2U instance represents one PCIe
+  lane.
+
+properties:
+  compatible:
+    const: nvidia,tegra194-p2u
+
+  reg:
+    maxItems: 1
+    description: Should be the physical address space and length of respective each P2U instance.
+
+  reg-names:
+    items:
+      - const: ctl
+
+  '#phy-cells':
+    const: 0
+
+additionalProperties: false
+
+examples:
+  - |
+    p2u_hsio_0: phy@3e10000 {
+        compatible = "nvidia,tegra194-p2u";
+        reg = <0x03e10000 0x10000>;
+        reg-names = "ctl";
+
+        #phy-cells = <0>;
+    };
diff --git a/dts/Bindings/phy/qcom,edp-phy.yaml b/dts/Bindings/phy/qcom,edp-phy.yaml
new file mode 100644
index 0000000000..9076e19b64
--- /dev/null
+++ b/dts/Bindings/phy/qcom,edp-phy.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/phy/qcom,edp-phy.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm eDP PHY
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description:
+  The Qualcomm eDP PHY is found in a number of Qualcomm platform and provides
+  the physical interface for Embedded Display Port.
+
+properties:
+  compatible:
+    const: qcom,sc8180x-edp-phy
+
+  reg:
+    items:
+      - description: PHY base register block
+      - description: tx0 register block
+      - description: tx1 register block
+      - description: PLL register block
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: aux
+      - const: cfg_ahb
+
+  "#clock-cells":
+    const: 1
+
+  "#phy-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - "#clock-cells"
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    phy@aec2a00 {
+      compatible = "qcom,sc8180x-edp-phy";
+      reg = <0x0aec2a00 0x1c0>,
+            <0x0aec2200 0xa0>,
+            <0x0aec2600 0xa0>,
+            <0x0aec2000 0x19c>;
+
+      clocks = <&dispcc 0>, <&dispcc 1>;
+      clock-names = "aux", "cfg_ahb";
+
+      #clock-cells = <1>;
+      #phy-cells = <0>;
+    };
+...
diff --git a/dts/Bindings/phy/qcom,qmp-phy.yaml b/dts/Bindings/phy/qcom,qmp-phy.yaml
index 630ceaf915..e417cd6679 100644
--- a/dts/Bindings/phy/qcom,qmp-phy.yaml
+++ b/dts/Bindings/phy/qcom,qmp-phy.yaml
@@ -50,6 +50,10 @@ properties:
       - qcom,sm8350-qmp-ufs-phy
       - qcom,sm8350-qmp-usb3-phy
       - qcom,sm8350-qmp-usb3-uni-phy
+      - qcom,sm8450-qmp-gen3x1-pcie-phy
+      - qcom,sm8450-qmp-gen4x2-pcie-phy
+      - qcom,sm8450-qmp-ufs-phy
+      - qcom,sm8450-qmp-usb3-phy
       - qcom,sdx55-qmp-pcie-phy
       - qcom,sdx55-qmp-usb3-uni-phy
 
@@ -332,6 +336,8 @@ allOf:
               - qcom,sm8250-qmp-gen3x1-pcie-phy
               - qcom,sm8250-qmp-gen3x2-pcie-phy
               - qcom,sm8250-qmp-modem-pcie-phy
+              - qcom,sm8450-qmp-gen3x1-pcie-phy
+              - qcom,sm8450-qmp-gen4x2-pcie-phy
     then:
       properties:
         clocks:
diff --git a/dts/Bindings/phy/qcom,qusb2-phy.yaml b/dts/Bindings/phy/qcom,qusb2-phy.yaml
index aa2e409a1a..e651a63a4b 100644
--- a/dts/Bindings/phy/qcom,qusb2-phy.yaml
+++ b/dts/Bindings/phy/qcom,qusb2-phy.yaml
@@ -30,6 +30,7 @@ properties:
           - enum:
               - qcom,sc7180-qusb2-phy
               - qcom,sdm845-qusb2-phy
+              - qcom,sm6350-qusb2-phy
           - const: qcom,qusb2-v2-phy
   reg:
     maxItems: 1
diff --git a/dts/Bindings/phy/qcom,usb-snps-femto-v2.yaml b/dts/Bindings/phy/qcom,usb-snps-femto-v2.yaml
index 20203a8a9e..0dfe6914ec 100644
--- a/dts/Bindings/phy/qcom,usb-snps-femto-v2.yaml
+++ b/dts/Bindings/phy/qcom,usb-snps-femto-v2.yaml
@@ -20,6 +20,7 @@ properties:
       - qcom,sm8150-usb-hs-phy
       - qcom,sm8250-usb-hs-phy
       - qcom,sm8350-usb-hs-phy
+      - qcom,sm8450-usb-hs-phy
       - qcom,usb-snps-femto-v2-phy
 
   reg:
diff --git a/dts/Bindings/phy/socionext,uniphier-ahci-phy.yaml b/dts/Bindings/phy/socionext,uniphier-ahci-phy.yaml
index 745c525ce6..3b400a85b4 100644
--- a/dts/Bindings/phy/socionext,uniphier-ahci-phy.yaml
+++ b/dts/Bindings/phy/socionext,uniphier-ahci-phy.yaml
@@ -16,6 +16,7 @@ maintainers:
 properties:
   compatible:
     enum:
+      - socionext,uniphier-pro4-ahci-phy
       - socionext,uniphier-pxs2-ahci-phy
       - socionext,uniphier-pxs3-ahci-phy
 
@@ -26,23 +27,35 @@ properties:
     const: 0
 
   clocks:
+    minItems: 1
     maxItems: 2
 
   clock-names:
     oneOf:
       - items:          # for PXs2
           - const: link
+      - items:          # for Pro4
+          - const: link
+          - const: gio
       - items:          # for others
           - const: link
           - const: phy
 
   resets:
-    maxItems: 2
+    minItems: 2
+    maxItems: 5
 
   reset-names:
-    items:
-      - const: link
-      - const: phy
+    oneOf:
+      - items:          # for Pro4
+          - const: link
+          - const: gio
+          - const: pm
+          - const: tx
+          - const: rx
+      - items:          # for others
+          - const: link
+          - const: phy
 
 required:
   - compatible
diff --git a/dts/Bindings/phy/socionext,uniphier-pcie-phy.yaml b/dts/Bindings/phy/socionext,uniphier-pcie-phy.yaml
index 3e05668990..fbb71d6dd5 100644
--- a/dts/Bindings/phy/socionext,uniphier-pcie-phy.yaml
+++ b/dts/Bindings/phy/socionext,uniphier-pcie-phy.yaml
@@ -19,6 +19,7 @@ properties:
       - socionext,uniphier-pro5-pcie-phy
       - socionext,uniphier-ld20-pcie-phy
       - socionext,uniphier-pxs3-pcie-phy
+      - socionext,uniphier-nx1-pcie-phy
 
   reg:
     maxItems: 1
diff --git a/dts/Bindings/phy/socionext,uniphier-usb3hs-phy.yaml b/dts/Bindings/phy/socionext,uniphier-usb3hs-phy.yaml
index a681cbc3b4..33946efcac 100644
--- a/dts/Bindings/phy/socionext,uniphier-usb3hs-phy.yaml
+++ b/dts/Bindings/phy/socionext,uniphier-usb3hs-phy.yaml
@@ -22,6 +22,7 @@ properties:
       - socionext,uniphier-pxs2-usb3-hsphy
       - socionext,uniphier-ld20-usb3-hsphy
       - socionext,uniphier-pxs3-usb3-hsphy
+      - socionext,uniphier-nx1-usb3-hsphy
 
   reg:
     maxItems: 1
diff --git a/dts/Bindings/phy/socionext,uniphier-usb3ss-phy.yaml b/dts/Bindings/phy/socionext,uniphier-usb3ss-phy.yaml
index 41c0dd68ee..92d46eb913 100644
--- a/dts/Bindings/phy/socionext,uniphier-usb3ss-phy.yaml
+++ b/dts/Bindings/phy/socionext,uniphier-usb3ss-phy.yaml
@@ -23,6 +23,7 @@ properties:
       - socionext,uniphier-pxs2-usb3-ssphy
       - socionext,uniphier-ld20-usb3-ssphy
       - socionext,uniphier-pxs3-usb3-ssphy
+      - socionext,uniphier-nx1-usb3-ssphy
 
   reg:
     maxItems: 1
diff --git a/dts/Bindings/pinctrl/actions,s500-pinctrl.yaml b/dts/Bindings/pinctrl/actions,s500-pinctrl.yaml
index 3f94f69447..fb0f69ce9c 100644
--- a/dts/Bindings/pinctrl/actions,s500-pinctrl.yaml
+++ b/dts/Bindings/pinctrl/actions,s500-pinctrl.yaml
@@ -184,6 +184,9 @@ patternProperties:
 
     additionalProperties: false
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg
diff --git a/dts/Bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml b/dts/Bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml
index cce63c3cc4..bfce850c20 100644
--- a/dts/Bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml
+++ b/dts/Bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml
@@ -147,6 +147,7 @@ allOf:
   # boards are defining it at the moment so it would generate a lot of
   # warnings.
 
+  - $ref: "pinctrl.yaml#"
   - if:
       properties:
         compatible:
diff --git a/dts/Bindings/pinctrl/apple,pinctrl.yaml b/dts/Bindings/pinctrl/apple,pinctrl.yaml
index 07b00de797..d3b11351ca 100644
--- a/dts/Bindings/pinctrl/apple,pinctrl.yaml
+++ b/dts/Bindings/pinctrl/apple,pinctrl.yaml
@@ -17,7 +17,9 @@ description: |
 properties:
   compatible:
     items:
-      - const: apple,t8103-pinctrl
+      - enum:
+          - apple,t8103-pinctrl
+          - apple,t6000-pinctrl
       - const: apple,pinctrl
 
   reg:
@@ -50,6 +52,9 @@ properties:
   '#interrupt-cells':
     const: 2
 
+  power-domains:
+    maxItems: 1
+
 patternProperties:
   '-pins$':
     type: object
@@ -67,6 +72,9 @@ patternProperties:
 
     additionalProperties: false
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg
diff --git a/dts/Bindings/pinctrl/aspeed,ast2400-pinctrl.yaml b/dts/Bindings/pinctrl/aspeed,ast2400-pinctrl.yaml
index 100bb6dea3..c689bea7ce 100644
--- a/dts/Bindings/pinctrl/aspeed,ast2400-pinctrl.yaml
+++ b/dts/Bindings/pinctrl/aspeed,ast2400-pinctrl.yaml
@@ -50,6 +50,9 @@ patternProperties:
                   TXD3, TXD4, UART6, USB11D1, USB11H2, USB2D1, USB2H1, USBCKI, VGABIOS_ROM,
                   VGAHS, VGAVS, VPI18, VPI24, VPI30, VPO12, VPO24, WDTRST1, WDTRST2]
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
 
diff --git a/dts/Bindings/pinctrl/aspeed,ast2500-pinctrl.yaml b/dts/Bindings/pinctrl/aspeed,ast2500-pinctrl.yaml
index 904697bc94..d316cc0821 100644
--- a/dts/Bindings/pinctrl/aspeed,ast2500-pinctrl.yaml
+++ b/dts/Bindings/pinctrl/aspeed,ast2500-pinctrl.yaml
@@ -62,6 +62,9 @@ patternProperties:
                   USB11BHID, USB2AD, USB2AH, USB2BD, USB2BH, USBCKI, VGABIOSROM, VGAHS,
                   VGAVS, VPI24, VPO, WDTRST1, WDTRST2]
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - aspeed,external-nodes
diff --git a/dts/Bindings/pinctrl/aspeed,ast2600-pinctrl.yaml b/dts/Bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
index ad2866c997..57b68d6c7c 100644
--- a/dts/Bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
+++ b/dts/Bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
@@ -83,6 +83,9 @@ patternProperties:
                   UART7, UART8, UART9, USBA, USBB, VB, VGAHS, VGAVS, WDTRST1, WDTRST2,
                   WDTRST3, WDTRST4]
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
 
diff --git a/dts/Bindings/pinctrl/brcm,bcm6318-pinctrl.yaml b/dts/Bindings/pinctrl/brcm,bcm6318-pinctrl.yaml
index 08995a4f85..ab019a1998 100644
--- a/dts/Bindings/pinctrl/brcm,bcm6318-pinctrl.yaml
+++ b/dts/Bindings/pinctrl/brcm,bcm6318-pinctrl.yaml
@@ -37,6 +37,9 @@ patternProperties:
         enum: [ gpio0, gpio1, gpio2, gpio3, gpio4, gpio5, gpio6, gpio7,
                 gpio8, gpio9, gpio10, gpio11, gpio12, gpio13, gpio40 ]
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg
diff --git a/dts/Bindings/pinctrl/brcm,bcm63268-pinctrl.yaml b/dts/Bindings/pinctrl/brcm,bcm63268-pinctrl.yaml
index 58ffed44b3..8c9d4668c8 100644
--- a/dts/Bindings/pinctrl/brcm,bcm63268-pinctrl.yaml
+++ b/dts/Bindings/pinctrl/brcm,bcm63268-pinctrl.yaml
@@ -41,6 +41,9 @@ patternProperties:
                 vdsl_phy_override_1_grp, vdsl_phy_override_2_grp,
                 vdsl_phy_override_3_grp, dsl_gpio8, dsl_gpio9 ]
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg
diff --git a/dts/Bindings/pinctrl/brcm,bcm6328-pinctrl.yaml b/dts/Bindings/pinctrl/brcm,bcm6328-pinctrl.yaml
index 0fd24f40af..a8e22ec022 100644
--- a/dts/Bindings/pinctrl/brcm,bcm6328-pinctrl.yaml
+++ b/dts/Bindings/pinctrl/brcm,bcm6328-pinctrl.yaml
@@ -36,6 +36,9 @@ patternProperties:
                 gpio20, gpio25, gpio26, gpio27, gpio28, hsspi_cs1,
                 usb_port1 ]
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg
diff --git a/dts/Bindings/pinctrl/brcm,bcm6358-pinctrl.yaml b/dts/Bindings/pinctrl/brcm,bcm6358-pinctrl.yaml
index 0c3ce256aa..35867355a4 100644
--- a/dts/Bindings/pinctrl/brcm,bcm6358-pinctrl.yaml
+++ b/dts/Bindings/pinctrl/brcm,bcm6358-pinctrl.yaml
@@ -34,6 +34,9 @@ patternProperties:
         enum: [ ebi_cs_grp, uart1_grp, serial_led_grp, legacy_led_grp,
                 led_grp, spi_cs_grp, utopia_grp, pwm_syn_clk, sys_irq_grp ]
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg
diff --git a/dts/Bindings/pinctrl/brcm,bcm6362-pinctrl.yaml b/dts/Bindings/pinctrl/brcm,bcm6362-pinctrl.yaml
index 6f68fee373..b584d4b272 100644
--- a/dts/Bindings/pinctrl/brcm,bcm6362-pinctrl.yaml
+++ b/dts/Bindings/pinctrl/brcm,bcm6362-pinctrl.yaml
@@ -41,6 +41,9 @@ patternProperties:
                 gpio15, gpio16, gpio17, gpio18, gpio19, gpio20, gpio21,
                 gpio22, gpio23, gpio24, gpio25, gpio26, gpio27, nand_grp ]
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg
diff --git a/dts/Bindings/pinctrl/brcm,bcm6368-pinctrl.yaml b/dts/Bindings/pinctrl/brcm,bcm6368-pinctrl.yaml
index f4168b9f44..229323d923 100644
--- a/dts/Bindings/pinctrl/brcm,bcm6368-pinctrl.yaml
+++ b/dts/Bindings/pinctrl/brcm,bcm6368-pinctrl.yaml
@@ -42,6 +42,9 @@ patternProperties:
                 gpio24, gpio25, gpio26, gpio27, gpio28, gpio29, gpio30,
                 gpio31, uart1_grp ]
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg
diff --git a/dts/Bindings/pinctrl/brcm,ns-pinmux.yaml b/dts/Bindings/pinctrl/brcm,ns-pinmux.yaml
index fc39e3e9f7..8d1e5b1cdd 100644
--- a/dts/Bindings/pinctrl/brcm,ns-pinmux.yaml
+++ b/dts/Bindings/pinctrl/brcm,ns-pinmux.yaml
@@ -53,6 +53,7 @@ patternProperties:
     additionalProperties: false
 
 allOf:
+  - $ref: "pinctrl.yaml#"
   - if:
       properties:
         compatible:
@@ -77,7 +78,7 @@ additionalProperties: false
 
 examples:
   - |
-    pin-controller@1800c1c0 {
+    pinctrl@1800c1c0 {
         compatible = "brcm,bcm4708-pinmux";
         reg = <0x1800c1c0 0x24>;
         reg-names = "cru_gpio_control";
diff --git a/dts/Bindings/pinctrl/canaan,k210-fpioa.yaml b/dts/Bindings/pinctrl/canaan,k210-fpioa.yaml
index 46fbc73ab2..a44691d9c5 100644
--- a/dts/Bindings/pinctrl/canaan,k210-fpioa.yaml
+++ b/dts/Bindings/pinctrl/canaan,k210-fpioa.yaml
@@ -137,6 +137,9 @@ patternProperties:
 
     additionalProperties: false
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg
@@ -151,9 +154,9 @@ examples:
     #include <dt-bindings/clock/k210-clk.h>
     #include <dt-bindings/reset/k210-rst.h>
 
-    fpioa: pinmux@502B0000 {
+    fpioa: pinmux@502b0000 {
       compatible = "canaan,k210-fpioa";
-      reg = <0x502B0000 0x100>;
+      reg = <0x502b0000 0x100>;
       clocks = <&sysclk K210_CLK_FPIOA>,
                <&sysclk K210_CLK_APB0>;
       clock-names = "ref", "pclk";
diff --git a/dts/Bindings/pinctrl/cirrus,lochnagar.yaml b/dts/Bindings/pinctrl/cirrus,lochnagar.yaml
index a07dd19717..5cd512b7d5 100644
--- a/dts/Bindings/pinctrl/cirrus,lochnagar.yaml
+++ b/dts/Bindings/pinctrl/cirrus,lochnagar.yaml
@@ -51,15 +51,6 @@ properties:
       appropriate of the LOCHNAGARx_PIN_NUM_GPIOS define, see [3].
     maxItems: 1
 
-  pinctrl-0:
-    description:
-      A phandle to the default pinctrl state.
-
-  pinctrl-names:
-    description:
-      A pinctrl state named "default" must be defined.
-    const: default
-
   pin-settings:
     type: object
     patternProperties:
@@ -181,6 +172,9 @@ properties:
 
     additionalProperties: false
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - gpio-controller
diff --git a/dts/Bindings/pinctrl/cirrus,madera.yaml b/dts/Bindings/pinctrl/cirrus,madera.yaml
index 4cb174bf31..c85f759ae5 100644
--- a/dts/Bindings/pinctrl/cirrus,madera.yaml
+++ b/dts/Bindings/pinctrl/cirrus,madera.yaml
@@ -30,16 +30,6 @@ description: |
     Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
 
 properties:
-  pinctrl-0:
-    description:
-      A phandle to the node containing the subnodes containing default
-      configurations.
-
-  pinctrl-names:
-    description:
-      A pinctrl state named "default" must be defined.
-    const: default
-
   pin-settings:
     description:
       One subnode is required to contain the default settings. It
@@ -117,6 +107,9 @@ properties:
 
     additionalProperties: false
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - pinctrl-0
   - pinctrl-names
diff --git a/dts/Bindings/pinctrl/fsl,imx8mm-pinctrl.yaml b/dts/Bindings/pinctrl/fsl,imx8mm-pinctrl.yaml
index 6d7d162e61..6717f16339 100644
--- a/dts/Bindings/pinctrl/fsl,imx8mm-pinctrl.yaml
+++ b/dts/Bindings/pinctrl/fsl,imx8mm-pinctrl.yaml
@@ -58,6 +58,9 @@ patternProperties:
 
     additionalProperties: false
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg
diff --git a/dts/Bindings/pinctrl/fsl,imx8mn-pinctrl.yaml b/dts/Bindings/pinctrl/fsl,imx8mn-pinctrl.yaml
index 7131cfd1fc..b1cdbb56d4 100644
--- a/dts/Bindings/pinctrl/fsl,imx8mn-pinctrl.yaml
+++ b/dts/Bindings/pinctrl/fsl,imx8mn-pinctrl.yaml
@@ -58,6 +58,9 @@ patternProperties:
 
     additionalProperties: false
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg
diff --git a/dts/Bindings/pinctrl/fsl,imx8mp-pinctrl.yaml b/dts/Bindings/pinctrl/fsl,imx8mp-pinctrl.yaml
index d474bc1f39..4eed3a4e15 100644
--- a/dts/Bindings/pinctrl/fsl,imx8mp-pinctrl.yaml
+++ b/dts/Bindings/pinctrl/fsl,imx8mp-pinctrl.yaml
@@ -58,6 +58,9 @@ patternProperties:
 
     additionalProperties: false
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg
diff --git a/dts/Bindings/pinctrl/fsl,imx8mq-pinctrl.yaml b/dts/Bindings/pinctrl/fsl,imx8mq-pinctrl.yaml
index 0af2b6c95c..d4a8ea5551 100644
--- a/dts/Bindings/pinctrl/fsl,imx8mq-pinctrl.yaml
+++ b/dts/Bindings/pinctrl/fsl,imx8mq-pinctrl.yaml
@@ -58,6 +58,9 @@ patternProperties:
 
     additionalProperties: false
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg
diff --git a/dts/Bindings/pinctrl/fsl,imx8ulp-pinctrl.yaml b/dts/Bindings/pinctrl/fsl,imx8ulp-pinctrl.yaml
index 86622c4f37..693398d882 100644
--- a/dts/Bindings/pinctrl/fsl,imx8ulp-pinctrl.yaml
+++ b/dts/Bindings/pinctrl/fsl,imx8ulp-pinctrl.yaml
@@ -56,6 +56,9 @@ patternProperties:
 
     additionalProperties: false
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg
diff --git a/dts/Bindings/pinctrl/fsl,imxrt1050.yaml b/dts/Bindings/pinctrl/fsl,imxrt1050.yaml
new file mode 100644
index 0000000000..1278f72935
--- /dev/null
+++ b/dts/Bindings/pinctrl/fsl,imxrt1050.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/fsl,imxrt1050.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale IMXRT1050 IOMUX Controller
+
+maintainers:
+  - Giulio Benetti <giulio.benetti@benettiengineering.com>
+  - Jesse Taube <Mr.Bossman075@gmail.com>
+
+description:
+  Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory
+  for common binding part and usage.
+
+properties:
+  compatible:
+    const: fsl,imxrt1050-iomuxc
+
+  reg:
+    maxItems: 1
+
+# Client device subnode's properties
+patternProperties:
+  'grp$':
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+
+    properties:
+      fsl,pins:
+        description:
+          each entry consists of 6 integers and represents the mux and config
+          setting for one pin. The first 5 integers <mux_reg conf_reg input_reg
+          mux_val input_val> are specified using a PIN_FUNC_ID macro, which can
+          be found in <include/dt-bindings/pinctrl/pins-imxrt1050.h>. The last
+          integer CONFIG is the pad setting value like pull-up on this pin. Please
+          refer to i.MXRT1050 Reference Manual for detailed CONFIG settings.
+        $ref: /schemas/types.yaml#/definitions/uint32-matrix
+        items:
+          items:
+            - description: |
+                "mux_reg" indicates the offset of mux register.
+            - description: |
+                "conf_reg" indicates the offset of pad configuration register.
+            - description: |
+                "input_reg" indicates the offset of select input register.
+            - description: |
+                "mux_val" indicates the mux value to be applied.
+            - description: |
+                "input_val" indicates the select input value to be applied.
+            - description: |
+                "pad_setting" indicates the pad configuration value to be applied.
+
+    required:
+      - fsl,pins
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    iomuxc: iomuxc@401f8000 {
+        compatible = "fsl,imxrt1050-iomuxc";
+        reg = <0x401f8000 0x4000>;
+
+        pinctrl_lpuart1: lpuart1grp {
+            fsl,pins =
+              <0x0EC 0x2DC 0x000 0x2 0x0	0xf1>,
+              <0x0F0 0x2E0 0x000 0x2 0x0	0xf1>;
+        };
+    };
diff --git a/dts/Bindings/pinctrl/ingenic,pinctrl.yaml b/dts/Bindings/pinctrl/ingenic,pinctrl.yaml
index a12d0ceb76..c2c370448b 100644
--- a/dts/Bindings/pinctrl/ingenic,pinctrl.yaml
+++ b/dts/Bindings/pinctrl/ingenic,pinctrl.yaml
@@ -28,9 +28,6 @@ maintainers:
   - Paul Cercueil <paul@crapouillou.net>
 
 properties:
-  nodename:
-    pattern: "^pinctrl@[0-9a-f]+$"
-
   compatible:
     oneOf:
       - enum:
@@ -121,6 +118,9 @@ patternProperties:
 
     additionalProperties: false
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg
@@ -169,7 +169,7 @@ additionalProperties:
 
 examples:
   - |
-    pin-controller@10010000 {
+    pinctrl@10010000 {
       compatible = "ingenic,jz4770-pinctrl";
       reg = <0x10010000 0x600>;
 
diff --git a/dts/Bindings/pinctrl/intel,lgm-io.yaml b/dts/Bindings/pinctrl/intel,lgm-io.yaml
index 2c0acb405e..b425483501 100644
--- a/dts/Bindings/pinctrl/intel,lgm-io.yaml
+++ b/dts/Bindings/pinctrl/intel,lgm-io.yaml
@@ -47,6 +47,9 @@ patternProperties:
 
     additionalProperties: false
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg
diff --git a/dts/Bindings/pinctrl/intel,pinctrl-thunderbay.yaml b/dts/Bindings/pinctrl/intel,pinctrl-thunderbay.yaml
new file mode 100644
index 0000000000..0ec476248f
--- /dev/null
+++ b/dts/Bindings/pinctrl/intel,pinctrl-thunderbay.yaml
@@ -0,0 +1,119 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/intel,pinctrl-thunderbay.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel Thunder Bay pin controller Device Tree Bindings
+
+maintainers:
+  - Lakshmi Sowjanya D <lakshmi.sowjanya.d@intel.com>
+
+description: |
+  Intel Thunder Bay SoC integrates a pin controller which enables control
+  of pin directions, input/output values and configuration
+  for a total of 67 pins.
+
+properties:
+  compatible:
+    const: intel,thunderbay-pinctrl
+
+  reg:
+    maxItems: 1
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+
+  gpio-ranges:
+    maxItems: 1
+
+  interrupts:
+    description:
+      Specifies the interrupt lines to be used by the controller.
+    maxItems: 2
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+patternProperties:
+  '^gpio@[0-9a-f]*$':
+    type: object
+
+    description:
+      Child nodes can be specified to contain pin configuration information,
+      which can then be utilized by pinctrl client devices.
+      The following properties are supported.
+
+    properties:
+      pins:
+        description: |
+          The name(s) of the pins to be configured in the child node.
+          Supported pin names are "GPIO0" up to "GPIO66".
+
+      bias-disable: true
+
+      bias-pull-down: true
+
+      bias-pull-up: true
+
+      drive-strength:
+        description: Drive strength for the pad.
+        enum: [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]
+
+      bias-bus-hold:
+        type: boolean
+
+      input-schmitt-enable:
+        type: boolean
+
+      slew-rate:
+        description: GPIO slew rate control.
+                      0 - Slow
+                      1 - Fast
+        enum: [0, 1]
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - '#gpio-cells'
+  - gpio-ranges
+  - interrupts
+  - interrupt-controller
+  - '#interrupt-cells'
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    // Example 1
+    pinctrl0: gpio@0 {
+        compatible = "intel,thunderbay-pinctrl";
+        reg = <0x600b0000 0x88>;
+        gpio-controller;
+        #gpio-cells = <0x2>;
+        gpio-ranges = <&pinctrl0 0 0 67>;
+        interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+    };
+
+    // Example 2
+    pinctrl1: gpio@1 {
+        compatible = "intel,thunderbay-pinctrl";
+        reg = <0x600c0000 0x88>;
+        gpio-controller;
+        #gpio-cells = <0x2>;
+        gpio-ranges = <&pinctrl1 0 0 53>;
+        interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+    };
diff --git a/dts/Bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml b/dts/Bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml
index f8e6e138dc..6953c958ff 100644
--- a/dts/Bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml
+++ b/dts/Bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml
@@ -64,6 +64,9 @@ required:
   - gpio-controller
   - "#gpio-cells"
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 patternProperties:
   '-[0-9]+$':
     type: object
diff --git a/dts/Bindings/pinctrl/mediatek,mt6779-pinctrl.yaml b/dts/Bindings/pinctrl/mediatek,mt6779-pinctrl.yaml
index 152c151c27..e7601c0f5a 100644
--- a/dts/Bindings/pinctrl/mediatek,mt6779-pinctrl.yaml
+++ b/dts/Bindings/pinctrl/mediatek,mt6779-pinctrl.yaml
@@ -59,6 +59,9 @@ properties:
   "#interrupt-cells":
     const: 2
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg
diff --git a/dts/Bindings/pinctrl/mediatek,mt6797-pinctrl.yaml b/dts/Bindings/pinctrl/mediatek,mt6797-pinctrl.yaml
index 76a6df75ed..d42215f59a 100644
--- a/dts/Bindings/pinctrl/mediatek,mt6797-pinctrl.yaml
+++ b/dts/Bindings/pinctrl/mediatek,mt6797-pinctrl.yaml
@@ -45,6 +45,9 @@ properties:
   "#interrupt-cells":
     const: 2
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg
diff --git a/dts/Bindings/pinctrl/mediatek,mt7622-pinctrl.yaml b/dts/Bindings/pinctrl/mediatek,mt7622-pinctrl.yaml
index 0feecd376c..78a0175cec 100644
--- a/dts/Bindings/pinctrl/mediatek,mt7622-pinctrl.yaml
+++ b/dts/Bindings/pinctrl/mediatek,mt7622-pinctrl.yaml
@@ -42,6 +42,9 @@ properties:
   "#interrupt-cells":
     const: 2
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg
diff --git a/dts/Bindings/pinctrl/mediatek,mt7986-pinctrl.yaml b/dts/Bindings/pinctrl/mediatek,mt7986-pinctrl.yaml
index 7602b11e8b..4eadea55df 100644
--- a/dts/Bindings/pinctrl/mediatek,mt7986-pinctrl.yaml
+++ b/dts/Bindings/pinctrl/mediatek,mt7986-pinctrl.yaml
@@ -56,6 +56,9 @@ properties:
   "#interrupt-cells":
     const: 2
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg
diff --git a/dts/Bindings/pinctrl/mediatek,mt8183-pinctrl.yaml b/dts/Bindings/pinctrl/mediatek,mt8183-pinctrl.yaml
index cc1509e9b9..2d13a57b89 100644
--- a/dts/Bindings/pinctrl/mediatek,mt8183-pinctrl.yaml
+++ b/dts/Bindings/pinctrl/mediatek,mt8183-pinctrl.yaml
@@ -56,6 +56,9 @@ properties:
   "#interrupt-cells":
     const: 2
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg
diff --git a/dts/Bindings/pinctrl/mscc,ocelot-pinctrl.txt b/dts/Bindings/pinctrl/mscc,ocelot-pinctrl.txt
index db99bd95d4..3bb7648766 100644
--- a/dts/Bindings/pinctrl/mscc,ocelot-pinctrl.txt
+++ b/dts/Bindings/pinctrl/mscc,ocelot-pinctrl.txt
@@ -4,7 +4,8 @@ Microsemi Ocelot pin controller Device Tree Bindings
 Required properties:
  - compatible		: Should be "mscc,ocelot-pinctrl",
 			  "mscc,jaguar2-pinctrl", "microchip,sparx5-pinctrl",
-			  "mscc,luton-pinctrl" or "mscc,serval-pinctrl"
+			  "mscc,luton-pinctrl", "mscc,serval-pinctrl" or
+			  "microchip,lan966x-pinctrl"
  - reg			: Address and length of the register set for the device
  - gpio-controller	: Indicates this device is a GPIO controller
  - #gpio-cells		: Must be 2.
diff --git a/dts/Bindings/pinctrl/pincfg-node.yaml b/dts/Bindings/pinctrl/pincfg-node.yaml
index 71ed0a9def..4b22a9e3a4 100644
--- a/dts/Bindings/pinctrl/pincfg-node.yaml
+++ b/dts/Bindings/pinctrl/pincfg-node.yaml
@@ -114,6 +114,9 @@ properties:
     description: enable output on a pin without actively driving it
       (such as enabling an output buffer)
 
+  output-impedance-ohms:
+    description: set the output impedance of a pin to at most X ohms
+
   output-low:
     type: boolean
     description: set the pin to output mode with low level
diff --git a/dts/Bindings/pinctrl/pinctrl-bindings.txt b/dts/Bindings/pinctrl/pinctrl-bindings.txt
index 9dae60acf9..6904072d39 100644
--- a/dts/Bindings/pinctrl/pinctrl-bindings.txt
+++ b/dts/Bindings/pinctrl/pinctrl-bindings.txt
@@ -97,47 +97,8 @@ For example:
 	};
 
 == Pin controller devices ==
-Required properties: See the pin controller driver specific documentation
 
-Optional properties:
-#pinctrl-cells:	Number of pin control cells in addition to the index within the
-		pin controller device instance
-
-pinctrl-use-default: Boolean. Indicates that the OS can use the boot default
-		pin configuration. This allows using an OS that does not have a
-		driver for the pin controller. This property can be set either
-		globally for the pin controller or in child nodes for individual
-		pin group control.
-
-Pin controller devices should contain the pin configuration nodes that client
-devices reference.
-
-For example:
-
-	pincontroller {
-		... /* Standard DT properties for the device itself elided */
-
-		state_0_node_a {
-			...
-		};
-		state_1_node_a {
-			...
-		};
-		state_1_node_b {
-			...
-		};
-	}
-
-The contents of each of those pin configuration child nodes is defined
-entirely by the binding for the individual pin controller device. There
-exists no common standard for this content. The pinctrl framework only
-provides generic helper bindings that the pin controller driver can use.
-
-The pin configuration nodes need not be direct children of the pin controller
-device; they may be grandchildren, for example. Whether this is legal, and
-whether there is any interaction between the child and intermediate parent
-nodes, is again defined entirely by the binding for the individual pin
-controller device.
+See pinctrl.yaml
 
 == Generic pin multiplexing node content ==
 
diff --git a/dts/Bindings/pinctrl/pinctrl-mt8192.yaml b/dts/Bindings/pinctrl/pinctrl-mt8192.yaml
index c4c0712116..3c84676a16 100644
--- a/dts/Bindings/pinctrl/pinctrl-mt8192.yaml
+++ b/dts/Bindings/pinctrl/pinctrl-mt8192.yaml
@@ -108,6 +108,9 @@ patternProperties:
 
     additionalProperties: false
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg
diff --git a/dts/Bindings/pinctrl/pinctrl-mt8195.yaml b/dts/Bindings/pinctrl/pinctrl-mt8195.yaml
index 5e2bb2bf3a..328ea59c54 100644
--- a/dts/Bindings/pinctrl/pinctrl-mt8195.yaml
+++ b/dts/Bindings/pinctrl/pinctrl-mt8195.yaml
@@ -55,137 +55,162 @@ properties:
       Identifying i2c pins pull up/down type which is RSEL. It can support
       RSEL define or si unit value(ohm) to set different resistance.
 
-#PIN CONFIGURATION NODES
+# PIN CONFIGURATION NODES
 patternProperties:
   '-pins$':
     type: object
-    description: |
-      A pinctrl node should contain at least one subnodes representing the
-      pinctrl groups available on the machine. Each subnode will list the
-      pins it needs, and how they should be configured, with regard to muxer
-      configuration, pullups, drive strength, input enable/disable and
-      input schmitt.
-      An example of using macro:
-      pincontroller {
-        /* GPIO0 set as multifunction GPIO0 */
-        gpio_pin {
-          pinmux = <PINMUX_GPIO0__FUNC_GPIO0>;
-        };
-        /* GPIO8 set as multifunction SDA0 */
-        i2c0_pin {
-          pinmux = <PINMUX_GPIO8__FUNC_SDA0>;
-        };
-      };
-    $ref: "pinmux-node.yaml"
-
-    properties:
-      pinmux:
-        description: |
-          Integer array, represents gpio pin number and mux setting.
-          Supported pin number and mux varies for different SoCs, and are defined
-          as macros in dt-bindings/pinctrl/<soc>-pinfunc.h directly.
-
-      drive-strength:
-        enum: [2, 4, 6, 8, 10, 12, 14, 16]
-
-      bias-pull-down:
-        description: |
-          For pull down type is normal, it don't need add RSEL & R1R0 define
-          and resistance value.
-          For pull down type is PUPD/R0/R1 type, it can add R1R0 define to
-          set different resistance. It can support "MTK_PUPD_SET_R1R0_00" &
-          "MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" & "MTK_PUPD_SET_R1R0_11"
-          define in mt8195.
-          For pull down type is RSEL, it can add RSEL define & resistance value(ohm)
-          to set different resistance by identifying property "mediatek,rsel_resistance_in_si_unit".
-          It can support "MTK_PULL_SET_RSEL_000" & "MTK_PULL_SET_RSEL_001"
-          & "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011" & "MTK_PULL_SET_RSEL_100"
-          & "MTK_PULL_SET_RSEL_101" & "MTK_PULL_SET_RSEL_110" & "MTK_PULL_SET_RSEL_111"
-          define in mt8195. It can also support resistance value(ohm) "75000" & "5000" in mt8195.
-          oneOf:
-            - enum: [100, 101, 102, 103]
-            - description: mt8195 pull down PUPD/R0/R1 type define value.
-            - enum: [200, 201, 202, 203, 204, 205, 206, 207]
-            - description: mt8195 pull down RSEL type define value.
-            - enum: [75000, 5000]
-            - description: mt8195 pull down RSEL type si unit value(ohm).
-
-          An example of using RSEL define:
-          pincontroller {
-            i2c0_pin {
-              pinmux = <PINMUX_GPIO8__FUNC_SDA0>;
-              bias-pull-down = <MTK_PULL_SET_RSEL_001>;
-            };
-          };
-          An example of using si unit resistance value(ohm):
-          &pio {
-            mediatek,rsel_resistance_in_si_unit;
-          }
-          pincontroller {
-            i2c0_pin {
-              pinmux = <PINMUX_GPIO8__FUNC_SDA0>;
-              bias-pull-down = <75000>;
-            };
-          };
-
-      bias-pull-up:
+    additionalProperties: false
+    patternProperties:
+      '^pins':
+        type: object
+        additionalProperties: false
         description: |
-          For pull up type is normal, it don't need add RSEL & R1R0 define
-          and resistance value.
-          For pull up type is PUPD/R0/R1 type, it can add R1R0 define to
-          set different resistance. It can support "MTK_PUPD_SET_R1R0_00" &
-          "MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" & "MTK_PUPD_SET_R1R0_11"
-          define in mt8195.
-          For pull up type is RSEL, it can add RSEL define & resistance value(ohm)
-          to set different resistance by identifying property "mediatek,rsel_resistance_in_si_unit".
-          It can support "MTK_PULL_SET_RSEL_000" & "MTK_PULL_SET_RSEL_001"
-          & "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011" & "MTK_PULL_SET_RSEL_100"
-          & "MTK_PULL_SET_RSEL_101" & "MTK_PULL_SET_RSEL_110" & "MTK_PULL_SET_RSEL_111"
-          define in mt8195. It can also support resistance value(ohm)
-          "1000" & "1500" & "2000" & "3000" & "4000" & "5000" & "10000" & "75000" in mt8195.
-          oneOf:
-            - enum: [100, 101, 102, 103]
-            - description: mt8195 pull up PUPD/R0/R1 type define value.
-            - enum: [200, 201, 202, 203, 204, 205, 206, 207]
-            - description: mt8195 pull up RSEL type define value.
-            - enum: [1000, 1500, 2000, 3000, 4000, 5000, 10000, 75000]
-            - description: mt8195 pull up RSEL type si unit value(ohm).
-          An example of using RSEL define:
+          A pinctrl node should contain at least one subnodes representing the
+          pinctrl groups available on the machine. Each subnode will list the
+          pins it needs, and how they should be configured, with regard to muxer
+          configuration, pullups, drive strength, input enable/disable and
+          input schmitt.
+          An example of using macro:
           pincontroller {
-            i2c0_pin {
-              pinmux = <PINMUX_GPIO8__FUNC_SDA0>;
-              bias-pull-up = <MTK_PULL_SET_RSEL_001>;
+            /* GPIO0 set as multifunction GPIO0 */
+            gpio-pins {
+              pins {
+                pinmux = <PINMUX_GPIO0__FUNC_GPIO0>;
+              }
             };
-          };
-          An example of using si unit resistance value(ohm):
-          &pio {
-            mediatek,rsel_resistance_in_si_unit;
-          }
-          pincontroller {
-            i2c0_pin {
-              pinmux = <PINMUX_GPIO8__FUNC_SDA0>;
-              bias-pull-up = <1000>;
+            /* GPIO8 set as multifunction SDA0 */
+            i2c0-pins {
+              pins {
+                pinmux = <PINMUX_GPIO8__FUNC_SDA0>;
+              }
             };
           };
-
-      bias-disable: true
-
-      output-high: true
-
-      output-low: true
-
-      input-enable: true
-
-      input-disable: true
-
-      input-schmitt-enable: true
-
-      input-schmitt-disable: true
-
-    required:
-      - pinmux
-
-    additionalProperties: false
+        $ref: "pinmux-node.yaml"
+
+        properties:
+          pinmux:
+            description: |
+              Integer array, represents gpio pin number and mux setting.
+              Supported pin number and mux varies for different SoCs, and are
+              defined as macros in dt-bindings/pinctrl/<soc>-pinfunc.h
+              directly.
+
+          drive-strength:
+            enum: [2, 4, 6, 8, 10, 12, 14, 16]
+
+          bias-pull-down:
+            description: |
+              For pull down type is normal, it don't need add RSEL & R1R0 define
+              and resistance value.
+              For pull down type is PUPD/R0/R1 type, it can add R1R0 define to
+              set different resistance. It can support "MTK_PUPD_SET_R1R0_00" &
+              "MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" &
+              "MTK_PUPD_SET_R1R0_11" define in mt8195.
+              For pull down type is RSEL, it can add RSEL define & resistance
+              value(ohm) to set different resistance by identifying property
+              "mediatek,rsel_resistance_in_si_unit".
+              It can support "MTK_PULL_SET_RSEL_000" & "MTK_PULL_SET_RSEL_001"
+              & "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011"
+              & "MTK_PULL_SET_RSEL_100" & "MTK_PULL_SET_RSEL_101"
+              & "MTK_PULL_SET_RSEL_110" & "MTK_PULL_SET_RSEL_111"
+              define in mt8195. It can also support resistance value(ohm)
+              "75000" & "5000" in mt8195.
+              oneOf:
+                - enum: [100, 101, 102, 103]
+                - description: mt8195 pull down PUPD/R0/R1 type define value.
+                - enum: [200, 201, 202, 203, 204, 205, 206, 207]
+                - description: mt8195 pull down RSEL type define value.
+                - enum: [75000, 5000]
+                - description: mt8195 pull down RSEL type si unit value(ohm).
+
+              An example of using RSEL define:
+              pincontroller {
+                i2c0_pin {
+                  pins {
+                    pinmux = <PINMUX_GPIO8__FUNC_SDA0>;
+                    bias-pull-down = <MTK_PULL_SET_RSEL_001>;
+                  }
+                };
+              };
+              An example of using si unit resistance value(ohm):
+              &pio {
+                mediatek,rsel_resistance_in_si_unit;
+              }
+              pincontroller {
+                i2c0_pin {
+                  pins {
+                    pinmux = <PINMUX_GPIO8__FUNC_SDA0>;
+                    bias-pull-down = <75000>;
+                  }
+                };
+              };
+
+          bias-pull-up:
+            description: |
+              For pull up type is normal, it don't need add RSEL & R1R0 define
+              and resistance value.
+              For pull up type is PUPD/R0/R1 type, it can add R1R0 define to
+              set different resistance. It can support "MTK_PUPD_SET_R1R0_00" &
+              "MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" &
+              "MTK_PUPD_SET_R1R0_11" define in mt8195.
+              For pull up type is RSEL, it can add RSEL define & resistance
+              value(ohm) to set different resistance by identifying property
+              "mediatek,rsel_resistance_in_si_unit".
+              It can support "MTK_PULL_SET_RSEL_000" & "MTK_PULL_SET_RSEL_001"
+              & "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011"
+              & "MTK_PULL_SET_RSEL_100" & "MTK_PULL_SET_RSEL_101"
+              & "MTK_PULL_SET_RSEL_110" & "MTK_PULL_SET_RSEL_111"
+              define in mt8195. It can also support resistance value(ohm)
+              "1000" & "1500" & "2000" & "3000" & "4000" & "5000" & "10000" &
+              "75000" in mt8195.
+              oneOf:
+                - enum: [100, 101, 102, 103]
+                - description: mt8195 pull up PUPD/R0/R1 type define value.
+                - enum: [200, 201, 202, 203, 204, 205, 206, 207]
+                - description: mt8195 pull up RSEL type define value.
+                - enum: [1000, 1500, 2000, 3000, 4000, 5000, 10000, 75000]
+                - description: mt8195 pull up RSEL type si unit value(ohm).
+              An example of using RSEL define:
+              pincontroller {
+                i2c0-pins {
+                  pins {
+                    pinmux = <PINMUX_GPIO8__FUNC_SDA0>;
+                    bias-pull-up = <MTK_PULL_SET_RSEL_001>;
+                  }
+                };
+              };
+              An example of using si unit resistance value(ohm):
+              &pio {
+                mediatek,rsel_resistance_in_si_unit;
+              }
+              pincontroller {
+                i2c0-pins {
+                  pins {
+                    pinmux = <PINMUX_GPIO8__FUNC_SDA0>;
+                    bias-pull-up = <1000>;
+                  }
+                };
+              };
+
+          bias-disable: true
+
+          output-high: true
+
+          output-low: true
+
+          input-enable: true
+
+          input-disable: true
+
+          input-schmitt-enable: true
+
+          input-schmitt-disable: true
+
+        required:
+          - pinmux
+
+allOf:
+  - $ref: "pinctrl.yaml#"
 
 required:
   - compatible
@@ -201,30 +226,46 @@ additionalProperties: false
 
 examples:
   - |
-            #include <dt-bindings/pinctrl/mt8195-pinfunc.h>
-            #include <dt-bindings/interrupt-controller/arm-gic.h>
-            pio: pinctrl@10005000 {
-                    compatible = "mediatek,mt8195-pinctrl";
-                    reg = <0x10005000 0x1000>,
-                          <0x11d10000 0x1000>,
-                          <0x11d30000 0x1000>,
-                          <0x11d40000 0x1000>,
-                          <0x11e20000 0x1000>,
-                          <0x11eb0000 0x1000>,
-                          <0x11f40000 0x1000>,
-                          <0x1000b000 0x1000>;
-                    reg-names = "iocfg0", "iocfg_bm", "iocfg_bl",
-                          "iocfg_br", "iocfg_lm", "iocfg_rb",
-                          "iocfg_tl", "eint";
-                    gpio-controller;
-                    #gpio-cells = <2>;
-                    gpio-ranges = <&pio 0 0 144>;
-                    interrupt-controller;
-                    interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH 0>;
-                    #interrupt-cells = <2>;
-
-                    pio-pins {
-                      pinmux = <PINMUX_GPIO0__FUNC_GPIO0>;
-                      output-low;
-                    };
-            };
+    #include <dt-bindings/pinctrl/mt8195-pinfunc.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #
+    pio: pinctrl@10005000 {
+      compatible = "mediatek,mt8195-pinctrl";
+      reg = <0x10005000 0x1000>,
+            <0x11d10000 0x1000>,
+            <0x11d30000 0x1000>,
+            <0x11d40000 0x1000>,
+            <0x11e20000 0x1000>,
+            <0x11eb0000 0x1000>,
+            <0x11f40000 0x1000>,
+            <0x1000b000 0x1000>;
+      reg-names = "iocfg0", "iocfg_bm", "iocfg_bl",
+                  "iocfg_br", "iocfg_lm", "iocfg_rb",
+                  "iocfg_tl", "eint";
+      gpio-controller;
+      #gpio-cells = <2>;
+      gpio-ranges = <&pio 0 0 144>;
+      interrupt-controller;
+      interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH 0>;
+      #interrupt-cells = <2>;
+
+      pio-pins {
+        pins {
+          pinmux = <PINMUX_GPIO0__FUNC_GPIO0>;
+          output-low;
+        };
+      };
+
+      spi0-pins {
+        pins-spi {
+          pinmux = <PINMUX_GPIO132__FUNC_SPIM0_CSB>,
+                   <PINMUX_GPIO134__FUNC_SPIM0_MO>,
+                   <PINMUX_GPIO133__FUNC_SPIM0_CLK>;
+          bias-disable;
+        };
+        pins-spi-mi {
+          pinmux = <PINMUX_GPIO135__FUNC_SPIM0_MI>;
+          bias-pull-down;
+        };
+      };
+    };
diff --git a/dts/Bindings/pinctrl/pinctrl.yaml b/dts/Bindings/pinctrl/pinctrl.yaml
new file mode 100644
index 0000000000..d471563119
--- /dev/null
+++ b/dts/Bindings/pinctrl/pinctrl.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Pin controller device
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+  - Rafał Miłecki <rafal@milecki.pl>
+
+description: |
+  Pin controller devices should contain the pin configuration nodes that client
+  devices reference.
+
+  The contents of each of those pin configuration child nodes is defined
+  entirely by the binding for the individual pin controller device. There
+  exists no common standard for this content. The pinctrl framework only
+  provides generic helper bindings that the pin controller driver can use.
+
+  The pin configuration nodes need not be direct children of the pin controller
+  device; they may be grandchildren, for example. Whether this is legal, and
+  whether there is any interaction between the child and intermediate parent
+  nodes, is again defined entirely by the binding for the individual pin
+  controller device.
+
+properties:
+  $nodename:
+    pattern: "^(pinctrl|pinmux)(@[0-9a-f]+)?$"
+
+  "#pinctrl-cells":
+    description: >
+      Number of pin control cells in addition to the index within the pin
+      controller device instance.
+
+  pinctrl-use-default:
+    type: boolean
+    description: >
+      Indicates that the OS can use the boot default pin configuration. This
+      allows using an OS that does not have a driver for the pin controller.
+      This property can be set either globally for the pin controller or in
+      child nodes for individual pin group control.
+
+additionalProperties: true
diff --git a/dts/Bindings/pinctrl/qcom,ipq6018-pinctrl.yaml b/dts/Bindings/pinctrl/qcom,ipq6018-pinctrl.yaml
index c64c932068..b83c7f476e 100644
--- a/dts/Bindings/pinctrl/qcom,ipq6018-pinctrl.yaml
+++ b/dts/Bindings/pinctrl/qcom,ipq6018-pinctrl.yaml
@@ -118,6 +118,9 @@ patternProperties:
 
     additionalProperties: false
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg
diff --git a/dts/Bindings/pinctrl/qcom,lpass-lpi-pinctrl.yaml b/dts/Bindings/pinctrl/qcom,lpass-lpi-pinctrl.yaml
index e47ebf934d..5c5542f162 100644
--- a/dts/Bindings/pinctrl/qcom,lpass-lpi-pinctrl.yaml
+++ b/dts/Bindings/pinctrl/qcom,lpass-lpi-pinctrl.yaml
@@ -103,6 +103,9 @@ patternProperties:
 
     additionalProperties: false
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg
diff --git a/dts/Bindings/pinctrl/qcom,mdm9607-pinctrl.yaml b/dts/Bindings/pinctrl/qcom,mdm9607-pinctrl.yaml
index 3b02dc6626..f7bd4be173 100644
--- a/dts/Bindings/pinctrl/qcom,mdm9607-pinctrl.yaml
+++ b/dts/Bindings/pinctrl/qcom,mdm9607-pinctrl.yaml
@@ -14,6 +14,7 @@ description: |
   MDM9607 platform.
 
 allOf:
+  - $ref: "pinctrl.yaml#"
   - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
 
 properties:
diff --git a/dts/Bindings/pinctrl/qcom,msm8226-pinctrl.yaml b/dts/Bindings/pinctrl/qcom,msm8226-pinctrl.yaml
index 040d2ada36..ab4a2b4cfd 100644
--- a/dts/Bindings/pinctrl/qcom,msm8226-pinctrl.yaml
+++ b/dts/Bindings/pinctrl/qcom,msm8226-pinctrl.yaml
@@ -97,6 +97,9 @@ patternProperties:
 
     additionalProperties: false
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg
diff --git a/dts/Bindings/pinctrl/qcom,msm8953-pinctrl.yaml b/dts/Bindings/pinctrl/qcom,msm8953-pinctrl.yaml
index abe9f4c9b1..64c0a41ca0 100644
--- a/dts/Bindings/pinctrl/qcom,msm8953-pinctrl.yaml
+++ b/dts/Bindings/pinctrl/qcom,msm8953-pinctrl.yaml
@@ -133,6 +133,9 @@ patternProperties:
 
     additionalProperties: false
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg
diff --git a/dts/Bindings/pinctrl/qcom,pmic-gpio.yaml b/dts/Bindings/pinctrl/qcom,pmic-gpio.yaml
index 8952b4cc12..9400b665a4 100644
--- a/dts/Bindings/pinctrl/qcom,pmic-gpio.yaml
+++ b/dts/Bindings/pinctrl/qcom,pmic-gpio.yaml
@@ -17,6 +17,7 @@ properties:
   compatible:
     items:
       - enum:
+          - qcom,pm2250-gpio
           - qcom,pm660-gpio
           - qcom,pm660l-gpio
           - qcom,pm6150-gpio
@@ -26,10 +27,12 @@ properties:
           - qcom,pm8005-gpio
           - qcom,pm8008-gpio
           - qcom,pm8018-gpio
+          - qcom,pm8019-gpio
           - qcom,pm8038-gpio
           - qcom,pm8058-gpio
           - qcom,pm8150-gpio
           - qcom,pm8150b-gpio
+          - qcom,pm8226-gpio
           - qcom,pm8350-gpio
           - qcom,pm8350b-gpio
           - qcom,pm8350c-gpio
diff --git a/dts/Bindings/pinctrl/qcom,qcm2290-pinctrl.yaml b/dts/Bindings/pinctrl/qcom,qcm2290-pinctrl.yaml
index 13f338619d..206f4f2387 100644
--- a/dts/Bindings/pinctrl/qcom,qcm2290-pinctrl.yaml
+++ b/dts/Bindings/pinctrl/qcom,qcm2290-pinctrl.yaml
@@ -118,6 +118,9 @@ patternProperties:
 
     additionalProperties: false
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg
diff --git a/dts/Bindings/pinctrl/qcom,sc7280-pinctrl.yaml b/dts/Bindings/pinctrl/qcom,sc7280-pinctrl.yaml
index 7d6a2ab10e..6c7c3f6a14 100644
--- a/dts/Bindings/pinctrl/qcom,sc7280-pinctrl.yaml
+++ b/dts/Bindings/pinctrl/qcom,sc7280-pinctrl.yaml
@@ -123,6 +123,9 @@ patternProperties:
 
     additionalProperties: false
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg
diff --git a/dts/Bindings/pinctrl/qcom,sc8180x-pinctrl.yaml b/dts/Bindings/pinctrl/qcom,sc8180x-pinctrl.yaml
index a82dab8983..8650917260 100644
--- a/dts/Bindings/pinctrl/qcom,sc8180x-pinctrl.yaml
+++ b/dts/Bindings/pinctrl/qcom,sc8180x-pinctrl.yaml
@@ -14,6 +14,7 @@ description: |
   SC8180X platform.
 
 allOf:
+  - $ref: "pinctrl.yaml#"
   - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
 
 properties:
diff --git a/dts/Bindings/pinctrl/qcom,sdx55-pinctrl.yaml b/dts/Bindings/pinctrl/qcom,sdx55-pinctrl.yaml
index 112dd59ce7..a38090b14a 100644
--- a/dts/Bindings/pinctrl/qcom,sdx55-pinctrl.yaml
+++ b/dts/Bindings/pinctrl/qcom,sdx55-pinctrl.yaml
@@ -118,6 +118,9 @@ patternProperties:
 
     additionalProperties: false
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg
diff --git a/dts/Bindings/pinctrl/qcom,sdx65-pinctrl.yaml b/dts/Bindings/pinctrl/qcom,sdx65-pinctrl.yaml
new file mode 100644
index 0000000000..cdfcf29dff
--- /dev/null
+++ b/dts/Bindings/pinctrl/qcom,sdx65-pinctrl.yaml
@@ -0,0 +1,191 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sdx65-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. SDX65 TLMM block
+
+maintainers:
+  - Vamsi krishna Lanka <quic_vamslank@quicinc.com>
+
+description:
+  This binding describes the Top Level Mode Multiplexer block found in the
+  SDX65 platform.
+
+properties:
+  compatible:
+    const: qcom,sdx65-tlmm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    description: Specifies the PIN numbers and Flags, as defined in
+      include/dt-bindings/interrupt-controller/irq.h
+    const: 2
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    description: Specifying the pin number and flags, as defined in
+      include/dt-bindings/gpio/gpio.h
+    const: 2
+
+  gpio-ranges:
+    maxItems: 1
+
+  gpio-reserved-ranges:
+    maxItems: 1
+
+#PIN CONFIGURATION NODES
+patternProperties:
+  '-state$':
+    oneOf:
+      - $ref: "#/$defs/qcom-sdx65-tlmm-state"
+      - patternProperties:
+          ".*":
+            $ref: "#/$defs/qcom-sdx65-tlmm-state"
+'$defs':
+  qcom-sdx65-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state"
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|10[0-7])$"
+            - enum: [ ufs_reset, sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, sdc2_data, sdc1_rclk ]
+        minItems: 1
+        maxItems: 150
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins. Functions are only valid for gpio pins.
+        enum: [ blsp_uart1, blsp_spi1, blsp_i2c1, blsp_uim1, atest_tsens,
+                bimc_dte1, dac_calib0, blsp_spi8, blsp_uart8, blsp_uim8,
+                qdss_cti_trig_out_b, bimc_dte0, dac_calib1, qdss_cti_trig_in_b,
+                dac_calib2, atest_tsens2, atest_usb1, blsp_spi10, blsp_uart10,
+                blsp_uim10, atest_bbrx1, atest_usb13, atest_bbrx0, atest_usb12,
+                mdp_vsync, edp_lcd, blsp_i2c10, atest_gpsadc1, atest_usb11,
+                atest_gpsadc0, edp_hot, atest_usb10, m_voc, dac_gpio, atest_char,
+                cam_mclk, pll_bypassnl, qdss_stm7, blsp_i2c8, qdss_tracedata_b,
+                pll_reset, qdss_stm6, qdss_stm5, qdss_stm4, atest_usb2, cci_i2c,
+                qdss_stm3, dac_calib3, atest_usb23, atest_char3, dac_calib4,
+                qdss_stm2, atest_usb22, atest_char2, qdss_stm1, dac_calib5,
+                atest_usb21, atest_char1, dbg_out, qdss_stm0, dac_calib6,
+                atest_usb20, atest_char0, dac_calib10, qdss_stm10,
+                qdss_cti_trig_in_a, cci_timer4, blsp_spi6, blsp_uart6, blsp_uim6,
+                blsp2_spi, qdss_stm9, qdss_cti_trig_out_a, dac_calib11,
+                qdss_stm8, cci_timer0, qdss_stm13, dac_calib7, cci_timer1,
+                qdss_stm12, dac_calib8, cci_timer2, blsp1_spi, qdss_stm11,
+                dac_calib9, cci_timer3, cci_async, dac_calib12, blsp_i2c6,
+                qdss_tracectl_a, dac_calib13, qdss_traceclk_a, dac_calib14,
+                dac_calib15, hdmi_rcv, dac_calib16, hdmi_cec, pwr_modem,
+                dac_calib17, hdmi_ddc, pwr_nav, dac_calib18, pwr_crypto,
+                dac_calib19, hdmi_hot, dac_calib20, dac_calib21, pci_e0,
+                dac_calib22, dac_calib23, dac_calib24, tsif1_sync, dac_calib25,
+                sd_write, tsif1_error, blsp_spi2, blsp_uart2, blsp_uim2,
+                qdss_cti, blsp_i2c2, blsp_spi3, blsp_uart3, blsp_uim3, blsp_i2c3,
+                uim3, blsp_spi9, blsp_uart9, blsp_uim9, blsp10_spi, blsp_i2c9,
+                blsp_spi7, blsp_uart7, blsp_uim7, qdss_tracedata_a, blsp_i2c7,
+                qua_mi2s, gcc_gp1_clk_a, ssc_irq, uim4, blsp_spi11, blsp_uart11,
+                blsp_uim11, gcc_gp2_clk_a, gcc_gp3_clk_a, blsp_i2c11, cri_trng0,
+                cri_trng1, cri_trng, qdss_stm18, pri_mi2s, qdss_stm17, blsp_spi4,
+                blsp_uart4, blsp_uim4, qdss_stm16, qdss_stm15, blsp_i2c4,
+                qdss_stm14, dac_calib26, spkr_i2s, audio_ref, lpass_slimbus,
+                isense_dbg, tsense_pwm1, tsense_pwm2, btfm_slimbus, ter_mi2s,
+                qdss_stm22, qdss_stm21, qdss_stm20, qdss_stm19, gcc_gp1_clk_b,
+                sec_mi2s, blsp_spi5, blsp_uart5, blsp_uim5, gcc_gp2_clk_b,
+                gcc_gp3_clk_b, blsp_i2c5, blsp_spi12, blsp_uart12, blsp_uim12,
+                qdss_stm25, qdss_stm31, blsp_i2c12, qdss_stm30, qdss_stm29,
+                tsif1_clk, qdss_stm28, tsif1_en, tsif1_data, sdc4_cmd, qdss_stm27,
+                qdss_traceclk_b, tsif2_error, sdc43, vfr_1, qdss_stm26, tsif2_clk,
+                sdc4_clk, qdss_stm24, tsif2_en, sdc42, qdss_stm23, qdss_tracectl_b,
+                sd_card, tsif2_data, sdc41, tsif2_sync, sdc40, mdp_vsync_p_b,
+                ldo_en, mdp_vsync_s_b, ldo_update, blsp11_uart_tx_b, blsp11_uart_rx_b,
+                blsp11_i2c_sda_b, prng_rosc, blsp11_i2c_scl_b, uim2, uim1, uim_batt,
+                pci_e2, pa_indicator, adsp_ext, ddr_bist, qdss_tracedata_11,
+                qdss_tracedata_12, modem_tsync, nav_dr, nav_pps, pci_e1, gsm_tx,
+                qspi_cs, ssbi2, ssbi1, mss_lte, qspi_clk, qspi0, qspi1, qspi2, qspi3,
+                gpio ]
+
+      drive-strength:
+        enum: [2, 4, 6, 8, 10, 12, 14, 16]
+        default: 2
+        description:
+          Selects the drive strength for the specified pins, in mA.
+
+      bias-pull-down: true
+
+      bias-pull-up: true
+
+      bias-disable: true
+
+      output-high: true
+
+      output-low: true
+
+    required:
+      - pins
+      - function
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - '#interrupt-cells'
+  - gpio-controller
+  - '#gpio-cells'
+  - gpio-ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    tlmm: pinctrl@f100000 {
+        compatible = "qcom,sdx65-tlmm";
+        reg = <0x03000000 0xdc2000>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&tlmm 0 0 109>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>;
+
+        gpio-wo-subnode-state {
+            pins = "gpio1";
+            function = "gpio";
+        };
+
+        uart-w-subnodes-state {
+            rx {
+                pins = "gpio4";
+                function = "blsp_uart1";
+                bias-pull-up;
+            };
+
+            tx {
+                pins = "gpio5";
+                function = "blsp_uart1";
+                bias-disable;
+            };
+        };
+    };
+...
diff --git a/dts/Bindings/pinctrl/qcom,sm6115-pinctrl.yaml b/dts/Bindings/pinctrl/qcom,sm6115-pinctrl.yaml
index 8fc06f6a3e..cfcde405d3 100644
--- a/dts/Bindings/pinctrl/qcom,sm6115-pinctrl.yaml
+++ b/dts/Bindings/pinctrl/qcom,sm6115-pinctrl.yaml
@@ -121,6 +121,9 @@ patternProperties:
 
     additionalProperties: false
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg
diff --git a/dts/Bindings/pinctrl/qcom,sm6125-pinctrl.yaml b/dts/Bindings/pinctrl/qcom,sm6125-pinctrl.yaml
index 5f7adaa81f..c8eec845ad 100644
--- a/dts/Bindings/pinctrl/qcom,sm6125-pinctrl.yaml
+++ b/dts/Bindings/pinctrl/qcom,sm6125-pinctrl.yaml
@@ -13,6 +13,7 @@ description: |
   in the SM6125 platform.
 
 allOf:
+  - $ref: "pinctrl.yaml#"
   - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
 
 properties:
diff --git a/dts/Bindings/pinctrl/qcom,sm6350-pinctrl.yaml b/dts/Bindings/pinctrl/qcom,sm6350-pinctrl.yaml
index 554992a681..898608671c 100644
--- a/dts/Bindings/pinctrl/qcom,sm6350-pinctrl.yaml
+++ b/dts/Bindings/pinctrl/qcom,sm6350-pinctrl.yaml
@@ -14,6 +14,7 @@ description: |
   in the SM6350 platform.
 
 allOf:
+  - $ref: "pinctrl.yaml#"
   - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
 
 properties:
diff --git a/dts/Bindings/pinctrl/qcom,sm8250-pinctrl.yaml b/dts/Bindings/pinctrl/qcom,sm8250-pinctrl.yaml
index 8508c57522..cfa2c50fdb 100644
--- a/dts/Bindings/pinctrl/qcom,sm8250-pinctrl.yaml
+++ b/dts/Bindings/pinctrl/qcom,sm8250-pinctrl.yaml
@@ -115,6 +115,9 @@ patternProperties:
 
       additionalProperties: false
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg
diff --git a/dts/Bindings/pinctrl/qcom,sm8350-pinctrl.yaml b/dts/Bindings/pinctrl/qcom,sm8350-pinctrl.yaml
index 4f2667ea28..6b7789db2f 100644
--- a/dts/Bindings/pinctrl/qcom,sm8350-pinctrl.yaml
+++ b/dts/Bindings/pinctrl/qcom,sm8350-pinctrl.yaml
@@ -14,6 +14,7 @@ description: |
   in the SM8350 platform.
 
 allOf:
+  - $ref: "pinctrl.yaml#"
   - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
 
 properties:
diff --git a/dts/Bindings/pinctrl/qcom,sm8450-pinctrl.yaml b/dts/Bindings/pinctrl/qcom,sm8450-pinctrl.yaml
new file mode 100644
index 0000000000..9c89124624
--- /dev/null
+++ b/dts/Bindings/pinctrl/qcom,sm8450-pinctrl.yaml
@@ -0,0 +1,143 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sm8450-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. SM8450 TLMM block
+
+maintainers:
+  - Vinod Koul <vkoul@kernel.org>
+
+description: |
+  This binding describes the Top Level Mode Multiplexer (TLMM) block found
+  in the SM8450 platform.
+
+allOf:
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sm8450-tlmm
+
+  reg:
+    maxItems: 1
+
+  interrupts: true
+  interrupt-controller: true
+  '#interrupt-cells': true
+  gpio-controller: true
+  gpio-reserved-ranges: true
+  '#gpio-cells': true
+  gpio-ranges: true
+  wakeup-parent: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+patternProperties:
+  '-state$':
+    oneOf:
+      - $ref: "#/$defs/qcom-sm8450-tlmm-state"
+      - patternProperties:
+          ".*":
+            $ref: "#/$defs/qcom-sm8450-tlmm-state"
+
+$defs:
+  qcom-sm8450-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state"
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-9][0-9]|20[0-9])$"
+            - enum: [ ufs_reset, sdc2_clk, sdc2_cmd, sdc2_data ]
+        minItems: 1
+        maxItems: 36
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+        enum: [ aon_cam, atest_char, atest_usb, audio_ref, cam_mclk, cci_async,
+                cci_i2c, cci_timer, cmu_rng, coex_uart1, coex_uart2, cri_trng,
+                cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1,
+                ddr_pxi2, ddr_pxi3, dp_hot, gcc_gp1, gcc_gp2, gcc_gp3,
+                gpio, ibi_i3c, jitter_bist, mdp_vsync, mdp_vsync0, mdp_vsync1,
+                mdp_vsync2, mdp_vsync3, mi2s0_data0, mi2s0_data1, mi2s0_sck,
+                mi2s0_ws, mi2s2_data0, mi2s2_data1, mi2s2_sck, mi2s2_ws,
+                mss_grfc0, mss_grfc1, mss_grfc10, mss_grfc11, mss_grfc12,
+                mss_grfc2, mss_grfc3, mss_grfc4, mss_grfc5, mss_grfc6,
+                mss_grfc7, mss_grfc8, mss_grfc9, nav, pcie0_clkreqn,
+                pcie1_clkreqn, phase_flag, pll_bist, pll_clk, pri_mi2s,
+                prng_rosc, qdss_cti, qdss_gpio, qlink0_enable, qlink0_request,
+                qlink0_wmss, qlink1_enable, qlink1_request, qlink1_wmss,
+                qlink2_enable, qlink2_request, qlink2_wmss, qspi0, qspi1,
+                qspi2, qspi3, qspi_clk, qspi_cs, qup0, qup1, qup10, qup11,
+                qup12, qup13, qup14, qup15, qup16, qup17, qup18, qup19, qup2,
+                qup20, qup21, qup3, qup4, qup5, qup6, qup7, qup8, qup9, qup_l4,
+                qup_l5, qup_l6, sd_write, sdc40, sdc41, sdc42, sdc43, sdc4_clk,
+                sdc4_cmd, sec_mi2s, tb_trig, tgu_ch0, tgu_ch1, tgu_ch2,
+                tgu_ch3, tmess_prng0, tmess_prng1, tmess_prng2, tmess_prng3,
+                tsense_pwm1, tsense_pwm2, uim0_clk, uim0_data, uim0_present,
+                uim0_reset, uim1_clk, uim1_data, uim1_present, uim1_reset,
+                usb2phy_ac, usb_phy, vfr_0, vfr_1, vsense_trigger ]
+
+      bias-disable: true
+      bias-pull-down: true
+      bias-pull-up: true
+      drive-strength: true
+      input-enable: true
+      output-high: true
+      output-low: true
+
+    required:
+      - pins
+      - function
+
+    additionalProperties: false
+
+examples:
+  - |
+        #include <dt-bindings/interrupt-controller/arm-gic.h>
+        pinctrl@f100000 {
+                compatible = "qcom,sm8450-tlmm";
+                reg = <0x0f100000 0x300000>;
+                gpio-controller;
+                #gpio-cells = <2>;
+                gpio-ranges = <&tlmm 0 0 211>;
+                interrupt-controller;
+                #interrupt-cells = <2>;
+                interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+
+                gpio-wo-subnode-state {
+                        pins = "gpio1";
+                        function = "gpio";
+                };
+
+                uart-w-subnodes-state {
+                    rx {
+                            pins = "gpio26";
+                            function = "qup7";
+                            bias-pull-up;
+                    };
+
+                    tx {
+                            pins = "gpio27";
+                            function = "qup7";
+                            bias-disable;
+                    };
+               };
+        };
+...
diff --git a/dts/Bindings/pinctrl/qcom,tlmm-common.yaml b/dts/Bindings/pinctrl/qcom,tlmm-common.yaml
index 3b37cf102d..be8cb0ead6 100644
--- a/dts/Bindings/pinctrl/qcom,tlmm-common.yaml
+++ b/dts/Bindings/pinctrl/qcom,tlmm-common.yaml
@@ -51,6 +51,9 @@ properties:
       should not be accessed by the OS. Please see the ../gpio/gpio.txt for more
       information.
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - interrupts
   - interrupt-controller
diff --git a/dts/Bindings/pinctrl/ralink,rt2880-pinmux.yaml b/dts/Bindings/pinctrl/ralink,rt2880-pinmux.yaml
index b32f2676ca..f0c52feb24 100644
--- a/dts/Bindings/pinctrl/ralink,rt2880-pinmux.yaml
+++ b/dts/Bindings/pinctrl/ralink,rt2880-pinmux.yaml
@@ -44,6 +44,9 @@ patternProperties:
 
     additionalProperties: false
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
 
diff --git a/dts/Bindings/pinctrl/renesas,pfc.yaml b/dts/Bindings/pinctrl/renesas,pfc.yaml
index ac4e068aa0..8548e3639b 100644
--- a/dts/Bindings/pinctrl/renesas,pfc.yaml
+++ b/dts/Bindings/pinctrl/renesas,pfc.yaml
@@ -70,6 +70,9 @@ properties:
   power-domains:
     maxItems: 1
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg
diff --git a/dts/Bindings/pinctrl/renesas,rza1-ports.yaml b/dts/Bindings/pinctrl/renesas,rza1-ports.yaml
index 7f80578dc2..8ed4b98a16 100644
--- a/dts/Bindings/pinctrl/renesas,rza1-ports.yaml
+++ b/dts/Bindings/pinctrl/renesas,rza1-ports.yaml
@@ -31,6 +31,9 @@ properties:
   reg:
     maxItems: 1
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg
diff --git a/dts/Bindings/pinctrl/renesas,rza2-pinctrl.yaml b/dts/Bindings/pinctrl/renesas,rza2-pinctrl.yaml
index ce1f734378..d761fddc22 100644
--- a/dts/Bindings/pinctrl/renesas,rza2-pinctrl.yaml
+++ b/dts/Bindings/pinctrl/renesas,rza2-pinctrl.yaml
@@ -72,6 +72,9 @@ patternProperties:
 
       additionalProperties: false
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg
diff --git a/dts/Bindings/pinctrl/renesas,rzg2l-pinctrl.yaml b/dts/Bindings/pinctrl/renesas,rzg2l-pinctrl.yaml
index ef68dabcf4..b749c82ede 100644
--- a/dts/Bindings/pinctrl/renesas,rzg2l-pinctrl.yaml
+++ b/dts/Bindings/pinctrl/renesas,rzg2l-pinctrl.yaml
@@ -73,6 +73,8 @@ additionalProperties:
         pins: true
         drive-strength:
           enum: [ 2, 4, 8, 12 ]
+        output-impedance-ohms:
+          enum: [ 33, 50, 66, 100 ]
         power-source:
           enum: [ 1800, 2500, 3300 ]
         slew-rate: true
@@ -90,6 +92,9 @@ additionalProperties:
       additionalProperties:
         $ref: "#/additionalProperties/anyOf/0"
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg
diff --git a/dts/Bindings/pinctrl/renesas,rzn1-pinctrl.yaml b/dts/Bindings/pinctrl/renesas,rzn1-pinctrl.yaml
index 4a43af0d6e..70b1788ab5 100644
--- a/dts/Bindings/pinctrl/renesas,rzn1-pinctrl.yaml
+++ b/dts/Bindings/pinctrl/renesas,rzn1-pinctrl.yaml
@@ -31,6 +31,9 @@ properties:
     description:
       The bus clock, sometimes described as pclk, for register accesses.
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg
diff --git a/dts/Bindings/pinctrl/rockchip,pinctrl.yaml b/dts/Bindings/pinctrl/rockchip,pinctrl.yaml
index 07c0a98ef9..b0eae3a67a 100644
--- a/dts/Bindings/pinctrl/rockchip,pinctrl.yaml
+++ b/dts/Bindings/pinctrl/rockchip,pinctrl.yaml
@@ -67,6 +67,9 @@ properties:
 
   ranges: true
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - rockchip,grf
diff --git a/dts/Bindings/pinctrl/samsung-pinctrl.txt b/dts/Bindings/pinctrl/samsung-pinctrl.txt
index b8b475967f..9e70edceb2 100644
--- a/dts/Bindings/pinctrl/samsung-pinctrl.txt
+++ b/dts/Bindings/pinctrl/samsung-pinctrl.txt
@@ -22,6 +22,7 @@ Required Properties:
   - "samsung,exynos5420-pinctrl": for Exynos5420 compatible pin-controller.
   - "samsung,exynos5433-pinctrl": for Exynos5433 compatible pin-controller.
   - "samsung,exynos7-pinctrl": for Exynos7 compatible pin-controller.
+  - "samsung,exynos7885-pinctrl": for Exynos7885 compatible pin-controller.
   - "samsung,exynos850-pinctrl": for Exynos850 compatible pin-controller.
   - "samsung,exynosautov9-pinctrl": for ExynosAutov9 compatible pin-controller.
 
diff --git a/dts/Bindings/pinctrl/socionext,uniphier-pinctrl.yaml b/dts/Bindings/pinctrl/socionext,uniphier-pinctrl.yaml
index a804d9bc16..14a8c0215c 100644
--- a/dts/Bindings/pinctrl/socionext,uniphier-pinctrl.yaml
+++ b/dts/Bindings/pinctrl/socionext,uniphier-pinctrl.yaml
@@ -10,9 +10,6 @@ maintainers:
   - Masahiro Yamada <yamada.masahiro@socionext.com>
 
 properties:
-  $nodename:
-    pattern: "pinctrl"
-
   compatible:
     enum:
       - socionext,uniphier-ld4-pinctrl
@@ -26,11 +23,48 @@ properties:
       - socionext,uniphier-pxs3-pinctrl
       - socionext,uniphier-nx1-pinctrl
 
+additionalProperties:
+  type: object
+
+  allOf:
+    - $ref: pincfg-node.yaml#
+    - $ref: pinmux-node.yaml#
+
+  properties:
+    phandle: true
+    function: true
+    groups: true
+    pins: true
+    bias-pull-up: true
+    bias-pull-down: true
+    bias-pull-pin-default: true
+    drive-strength: true
+
+  additionalProperties:
+    type: object
+
+    allOf:
+      - $ref: pincfg-node.yaml#
+      - $ref: pinmux-node.yaml#
+
+    properties:
+      phandle: true
+      function: true
+      groups: true
+      pins: true
+      bias-pull-up: true
+      bias-pull-down: true
+      bias-pull-pin-default: true
+      drive-strength: true
+
+    unevaluatedProperties: false
+
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
 
-additionalProperties: false
-
 examples:
   - |
     // The UniPhier pinctrl should be a subnode of a "syscon" compatible node.
diff --git a/dts/Bindings/pinctrl/st,stm32-pinctrl.yaml b/dts/Bindings/pinctrl/st,stm32-pinctrl.yaml
index ac88e01ec4..83a18d0331 100644
--- a/dts/Bindings/pinctrl/st,stm32-pinctrl.yaml
+++ b/dts/Bindings/pinctrl/st,stm32-pinctrl.yaml
@@ -183,6 +183,9 @@ patternProperties:
         required:
           - pinmux
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - '#address-cells'
diff --git a/dts/Bindings/pinctrl/starfive,jh7100-pinctrl.yaml b/dts/Bindings/pinctrl/starfive,jh7100-pinctrl.yaml
new file mode 100644
index 0000000000..9296360442
--- /dev/null
+++ b/dts/Bindings/pinctrl/starfive,jh7100-pinctrl.yaml
@@ -0,0 +1,307 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/starfive,jh7100-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive JH7100 Pin Controller Device Tree Bindings
+
+description: |
+  Bindings for the JH7100 RISC-V SoC from StarFive Ltd.
+
+  Out of the SoC's many pins only the ones named PAD_GPIO[0] to PAD_GPIO[63]
+  and PAD_FUNC_SHARE[0] to PAD_FUNC_SHARE[141] can be multiplexed and have
+  configurable bias, drive strength, schmitt trigger etc. The SoC has an
+  interesting 2-layered approach to pin muxing best illustrated by the diagram
+  below.
+
+                          Signal group 0, 1, ... or 6
+                                 ___|___
+                                |       |
+    LCD output -----------------|       |
+    CMOS Camera interface ------|       |--- PAD_GPIO[0]
+    Ethernet PHY interface -----|  MUX  |--- PAD_GPIO[1]
+      ...                       |       |      ...
+                                |       |--- PAD_GPIO[63]
+     -------- GPIO0 ------------|       |
+    |  -------|-- GPIO1 --------|       |--- PAD_FUNC_SHARE[0]
+    | |       |   |             |       |--- PAD_FUNC_SHARE[1]
+    | |       |   |  ...        |       |       ...
+    | |       |   |             |       |--- PAD_FUNC_SHARE[141]
+    | |  -----|---|-- GPIO63 ---|       |
+    | | |     |   |   |          -------
+    UART0     UART1 --
+
+
+  The big MUX in the diagram only has 7 different ways of mapping peripherals
+  on the left to pins on the right. StarFive calls the 7 configurations "signal
+  groups".
+  However some peripherals have their I/O go through the 64 "GPIOs". The
+  diagram only shows UART0 and UART1, but this also includes a number of other
+  UARTs, I2Cs, SPIs, PWMs etc. All these peripherals are connected to all 64
+  GPIOs such that any GPIO can be set up to be controlled by any of the
+  peripherals.
+  Note that signal group 0 doesn't map any of the GPIOs to pins, and only
+  signal group 1 maps the GPIOs to the pins named PAD_GPIO[0] to PAD_GPIO[63].
+
+maintainers:
+  - Emil Renner Berthing <kernel@esmil.dk>
+  - Drew Fustini <drew@beagleboard.org>
+
+properties:
+  compatible:
+    const: starfive,jh7100-pinctrl
+
+  reg:
+    minItems: 2
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: gpio
+      - const: padctl
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+
+  interrupts:
+    maxItems: 1
+    description: The GPIO parent interrupt.
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+
+  starfive,signal-group:
+    description: |
+      Select one of the 7 signal groups. If this property is not set it
+      defaults to the configuration already chosen by the earlier boot stages.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3, 4, 5, 6]
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - gpio-controller
+  - "#gpio-cells"
+  - interrupts
+  - interrupt-controller
+  - "#interrupt-cells"
+
+patternProperties:
+  '-[0-9]+$':
+    type: object
+    patternProperties:
+      '-pins$':
+        type: object
+        description: |
+          A pinctrl node should contain at least one subnode representing the
+          pinctrl groups available on the machine. Each subnode will list the
+          pins it needs, and how they should be configured, with regard to
+          muxer configuration, bias, input enable/disable, input schmitt
+          trigger enable/disable, slew-rate and drive strength.
+        $ref: "/schemas/pinctrl/pincfg-node.yaml"
+
+        properties:
+          pins:
+            description: |
+              The list of pin identifiers that properties in the node apply to.
+              This should be set using either the PAD_GPIO or PAD_FUNC_SHARE
+              macros.
+              Either this or "pinmux" has to be specified, but not both.
+            $ref: "/schemas/pinctrl/pinmux-node.yaml#/properties/pins"
+
+          pinmux:
+            description: |
+              The list of GPIOs and their mux settings that properties in the
+              node apply to. This should be set using the GPIOMUX macro.
+              Either this or "pins" has to be specified, but not both.
+            $ref: "/schemas/pinctrl/pinmux-node.yaml#/properties/pinmux"
+
+          bias-disable: true
+
+          bias-pull-up:
+            type: boolean
+
+          bias-pull-down:
+            type: boolean
+
+          drive-strength:
+            enum: [ 14, 21, 28, 35, 42, 49, 56, 63 ]
+
+          input-enable: true
+
+          input-disable: true
+
+          input-schmitt-enable: true
+
+          input-schmitt-disable: true
+
+          slew-rate:
+            maximum: 7
+
+          starfive,strong-pull-up:
+            description: enable strong pull-up.
+            type: boolean
+
+        additionalProperties: false
+
+    additionalProperties: false
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/starfive-jh7100.h>
+    #include <dt-bindings/reset/starfive-jh7100.h>
+    #include <dt-bindings/pinctrl/pinctrl-starfive.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pinctrl@11910000 {
+            compatible = "starfive,jh7100-pinctrl";
+            reg = <0x0 0x11910000 0x0 0x10000>,
+                  <0x0 0x11858000 0x0 0x1000>;
+            reg-names = "gpio", "padctl";
+            clocks = <&clkgen JH7100_CLK_GPIO_APB>;
+            resets = <&clkgen JH7100_RSTN_GPIO_APB>;
+            interrupts = <32>;
+            gpio-controller;
+            #gpio-cells = <2>;
+            interrupt-controller;
+            #interrupt-cells = <2>;
+            starfive,signal-group = <6>;
+
+            gmac_pins_default: gmac-0 {
+                gtxclk-pins {
+                    pins = <PAD_FUNC_SHARE(115)>;
+                    bias-pull-up;
+                    drive-strength = <35>;
+                    input-enable;
+                    input-schmitt-enable;
+                    slew-rate = <0>;
+                };
+                miitxclk-pins {
+                    pins = <PAD_FUNC_SHARE(116)>;
+                    bias-pull-up;
+                    drive-strength = <14>;
+                    input-enable;
+                    input-schmitt-disable;
+                    slew-rate = <0>;
+                };
+                tx-pins {
+                    pins = <PAD_FUNC_SHARE(117)>,
+                           <PAD_FUNC_SHARE(119)>,
+                           <PAD_FUNC_SHARE(120)>,
+                           <PAD_FUNC_SHARE(121)>,
+                           <PAD_FUNC_SHARE(122)>,
+                           <PAD_FUNC_SHARE(123)>,
+                           <PAD_FUNC_SHARE(124)>,
+                           <PAD_FUNC_SHARE(125)>,
+                           <PAD_FUNC_SHARE(126)>;
+                    bias-disable;
+                    drive-strength = <35>;
+                    input-disable;
+                    input-schmitt-disable;
+                    slew-rate = <0>;
+                };
+                rxclk-pins {
+                    pins = <PAD_FUNC_SHARE(127)>;
+                    bias-pull-up;
+                    drive-strength = <14>;
+                    input-enable;
+                    input-schmitt-disable;
+                    slew-rate = <6>;
+                };
+                rxer-pins {
+                    pins = <PAD_FUNC_SHARE(129)>;
+                    bias-pull-up;
+                    drive-strength = <14>;
+                    input-enable;
+                    input-schmitt-disable;
+                    slew-rate = <0>;
+                };
+                rx-pins {
+                    pins = <PAD_FUNC_SHARE(128)>,
+                           <PAD_FUNC_SHARE(130)>,
+                           <PAD_FUNC_SHARE(131)>,
+                           <PAD_FUNC_SHARE(132)>,
+                           <PAD_FUNC_SHARE(133)>,
+                           <PAD_FUNC_SHARE(134)>,
+                           <PAD_FUNC_SHARE(135)>,
+                           <PAD_FUNC_SHARE(136)>,
+                           <PAD_FUNC_SHARE(137)>,
+                           <PAD_FUNC_SHARE(138)>,
+                           <PAD_FUNC_SHARE(139)>,
+                           <PAD_FUNC_SHARE(140)>,
+                           <PAD_FUNC_SHARE(141)>;
+                    bias-pull-up;
+                    drive-strength = <14>;
+                    input-enable;
+                    input-schmitt-enable;
+                    slew-rate = <0>;
+                };
+            };
+
+            i2c0_pins_default: i2c0-0 {
+                i2c-pins {
+                    pinmux = <GPIOMUX(62, GPO_LOW,
+                              GPO_I2C0_PAD_SCK_OEN,
+                              GPI_I2C0_PAD_SCK_IN)>,
+                             <GPIOMUX(61, GPO_LOW,
+                              GPO_I2C0_PAD_SDA_OEN,
+                              GPI_I2C0_PAD_SDA_IN)>;
+                    bias-disable; /* external pull-up */
+                    input-enable;
+                    input-schmitt-enable;
+                };
+            };
+
+            uart3_pins_default: uart3-0 {
+                rx-pins {
+                    pinmux = <GPIOMUX(13, GPO_LOW, GPO_DISABLE,
+                              GPI_UART3_PAD_SIN)>;
+                    bias-pull-up;
+                    input-enable;
+                    input-schmitt-enable;
+                };
+                tx-pins {
+                    pinmux = <GPIOMUX(14, GPO_UART3_PAD_SOUT,
+                              GPO_ENABLE, GPI_NONE)>;
+                    bias-disable;
+                    input-disable;
+                    input-schmitt-disable;
+                };
+            };
+        };
+
+        gmac {
+            pinctrl-0 = <&gmac_pins_default>;
+            pinctrl-names = "default";
+        };
+
+        i2c0 {
+            pinctrl-0 = <&i2c0_pins_default>;
+            pinctrl-names = "default";
+        };
+
+        uart3 {
+            pinctrl-0 = <&uart3_pins_default>;
+            pinctrl-names = "default";
+        };
+    };
+
+...
diff --git a/dts/Bindings/pinctrl/toshiba,visconti-pinctrl.yaml b/dts/Bindings/pinctrl/toshiba,visconti-pinctrl.yaml
index 9f1dab0c24..306524885a 100644
--- a/dts/Bindings/pinctrl/toshiba,visconti-pinctrl.yaml
+++ b/dts/Bindings/pinctrl/toshiba,visconti-pinctrl.yaml
@@ -20,6 +20,9 @@ properties:
   reg:
     maxItems: 1
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg
@@ -80,7 +83,7 @@ examples:
         #address-cells = <2>;
         #size-cells = <2>;
 
-        pmux: pmux@24190000 {
+        pmux: pinmux@24190000 {
             compatible = "toshiba,tmpv7708-pinctrl";
             reg = <0 0x24190000 0 0x10000>;
 
diff --git a/dts/Bindings/pinctrl/xlnx,zynq-pinctrl.yaml b/dts/Bindings/pinctrl/xlnx,zynq-pinctrl.yaml
index ac97dbf699..cfd0cc549a 100644
--- a/dts/Bindings/pinctrl/xlnx,zynq-pinctrl.yaml
+++ b/dts/Bindings/pinctrl/xlnx,zynq-pinctrl.yaml
@@ -167,6 +167,9 @@ patternProperties:
 
     additionalProperties: false
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg
diff --git a/dts/Bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml b/dts/Bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml
index 8ef0d07d35..2722dc7bb0 100644
--- a/dts/Bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml
+++ b/dts/Bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml
@@ -290,6 +290,9 @@ patternProperties:
 
     additionalProperties: false
 
+allOf:
+  - $ref: pinctrl.yaml#
+
 required:
   - compatible
 
diff --git a/dts/Bindings/power/apple,pmgr-pwrstate.yaml b/dts/Bindings/power/apple,pmgr-pwrstate.yaml
new file mode 100644
index 0000000000..19a1949801
--- /dev/null
+++ b/dts/Bindings/power/apple,pmgr-pwrstate.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/apple,pmgr-pwrstate.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Apple SoC PMGR Power States
+
+maintainers:
+  - Hector Martin <marcan@marcan.st>
+
+allOf:
+  - $ref: "power-domain.yaml#"
+
+description: |
+  Apple SoCs include PMGR blocks responsible for power management,
+  which can control various clocks, resets, power states, and
+  performance features. This binding describes the device power
+  state registers, which control power states and resets.
+
+  Each instance of a power controller within the PMGR syscon node
+  represents a generic power domain provider, as documented in
+  Documentation/devicetree/bindings/power/power-domain.yaml.
+  The provider controls a single SoC block. The power hierarchy is
+  represented via power-domains relationships between these nodes.
+
+  See Documentation/devicetree/bindings/arm/apple/apple,pmgr.yaml
+  for the top-level PMGR node documentation.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - apple,t8103-pmgr-pwrstate
+          - apple,t6000-pmgr-pwrstate
+      - const: apple,pmgr-pwrstate
+
+  reg:
+    maxItems: 1
+
+  "#power-domain-cells":
+    const: 0
+
+  "#reset-cells":
+    const: 0
+
+  power-domains:
+    description:
+      Reference to parent power domains. A domain may have multiple parents,
+      and all will be powered up when it is powered.
+    minItems: 1
+    maxItems: 8 # Arbitrary, should be enough
+
+  label:
+    description:
+      Specifies the name of the SoC domain being controlled. This is used to
+      name the power/reset domains.
+
+  apple,always-on:
+    description:
+      Forces this power domain to always be powered up.
+    type: boolean
+
+  apple,min-state:
+    description:
+      Specifies the minimum power state for auto-PM.
+      0 = power gated, 4 = clock gated, 15 = on.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 15
+
+required:
+  - compatible
+  - reg
+  - "#power-domain-cells"
+  - "#reset-cells"
+  - label
+
+additionalProperties: false
diff --git a/dts/Bindings/power/qcom,rpmpd.yaml b/dts/Bindings/power/qcom,rpmpd.yaml
index e810480e3e..f48bc41d81 100644
--- a/dts/Bindings/power/qcom,rpmpd.yaml
+++ b/dts/Bindings/power/qcom,rpmpd.yaml
@@ -24,6 +24,7 @@ properties:
       - qcom,msm8994-rpmpd
       - qcom,msm8996-rpmpd
       - qcom,msm8998-rpmpd
+      - qcom,qcm2290-rpmpd
       - qcom,qcs404-rpmpd
       - qcom,sdm660-rpmpd
       - qcom,sc7180-rpmhpd
@@ -32,10 +33,12 @@ properties:
       - qcom,sdm845-rpmhpd
       - qcom,sdx55-rpmhpd
       - qcom,sm6115-rpmpd
+      - qcom,sm6125-rpmpd
       - qcom,sm6350-rpmhpd
       - qcom,sm8150-rpmhpd
       - qcom,sm8250-rpmhpd
       - qcom,sm8350-rpmhpd
+      - qcom,sm8450-rpmhpd
 
   '#power-domain-cells':
     const: 1
diff --git a/dts/Bindings/power/renesas,rcar-sysc.yaml b/dts/Bindings/power/renesas,rcar-sysc.yaml
index 99e8042ac1..62a49ca319 100644
--- a/dts/Bindings/power/renesas,rcar-sysc.yaml
+++ b/dts/Bindings/power/renesas,rcar-sysc.yaml
@@ -41,6 +41,7 @@ properties:
       - renesas,r8a77990-sysc # R-Car E3
       - renesas,r8a77995-sysc # R-Car D3
       - renesas,r8a779a0-sysc # R-Car V3U
+      - renesas,r8a779f0-sysc # R-Car S4-8
 
   reg:
     maxItems: 1
diff --git a/dts/Bindings/power/reset/gpio-poweroff.txt b/dts/Bindings/power/reset/gpio-poweroff.txt
deleted file mode 100644
index 3e56c1b34a..0000000000
--- a/dts/Bindings/power/reset/gpio-poweroff.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-Driver a GPIO line that can be used to turn the power off.
-
-The driver supports both level triggered and edge triggered power off.
-At driver load time, the driver will request the given gpio line and
-install a handler to power off the system. If the optional properties
-'input' is not found, the GPIO line will be driven in the inactive
-state. Otherwise its configured as an input.
-
-When the power-off handler is called, the gpio is configured as an
-output, and drive active, so triggering a level triggered power off
-condition. This will also cause an inactive->active edge condition, so
-triggering positive edge triggered power off. After a delay of 100ms,
-the GPIO is set to inactive, thus causing an active->inactive edge,
-triggering negative edge triggered power off. After another 100ms
-delay the GPIO is driver active again. If the power is still on and
-the CPU still running after a 3000ms delay, a WARN_ON(1) is emitted.
-
-Required properties:
-- compatible : should be "gpio-poweroff".
-- gpios : The GPIO to set high/low, see "gpios property" in
-  Documentation/devicetree/bindings/gpio/gpio.txt. If the pin should be
-  low to power down the board set it to "Active Low", otherwise set
-  gpio to "Active High".
-
-Optional properties:
-- input : Initially configure the GPIO line as an input. Only reconfigure
-  it to an output when the power-off handler is called. If this optional
-  property is not specified, the GPIO is initialized as an output in its
-  inactive state.
-- active-delay-ms: Delay (default 100) to wait after driving gpio active
-- inactive-delay-ms: Delay (default 100) to wait after driving gpio inactive
-- timeout-ms: Time to wait before asserting a WARN_ON(1). If nothing is
-              specified, 3000 ms is used.
-
-Examples:
-
-gpio-poweroff {
-	compatible = "gpio-poweroff";
-	gpios = <&gpio 4 0>;
-	timeout-ms = <3000>;
-};
diff --git a/dts/Bindings/power/reset/gpio-poweroff.yaml b/dts/Bindings/power/reset/gpio-poweroff.yaml
new file mode 100644
index 0000000000..45d66c7751
--- /dev/null
+++ b/dts/Bindings/power/reset/gpio-poweroff.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/reset/gpio-poweroff.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GPIO controlled power off
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+description: >
+  System power off support via a GPIO line. When a shutdown is
+  executed the operating system is expected to switch the GPIO
+  from inactive to active. After a delay (active-delay-ms) it
+  is expected to be switched back to inactive. After another
+  delay (inactive-delay-ms) it is configured as active again.
+  Finally the operating system assumes the power off failed if
+  the system is still running after waiting some time (timeout-ms).
+
+properties:
+  compatible:
+    const: gpio-poweroff
+
+  gpios:
+    maxItems: 1
+
+  input:
+    type: boolean
+    description: >
+      Initially configure the GPIO line as an input. Only reconfigure
+      it to an output when the power-off sequence is initiated. If this optional
+      property is not specified, the GPIO is initialized as an output in its inactive state.
+
+  active-delay-ms:
+    default: 100
+    description: Delay to wait after driving gpio active
+
+  inactive-delay-ms:
+    default: 100
+    description: Delay to wait after driving gpio inactive
+
+  timeout-ms:
+    default: 3000
+    description: Time to wait before assuming the power off sequence failed.
+
+required:
+  - compatible
+  - gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    gpio-poweroff {
+        compatible = "gpio-poweroff";
+        gpios = <&gpio 4 0>;
+        timeout-ms = <3000>;
+    };
diff --git a/dts/Bindings/power/reset/gpio-restart.txt b/dts/Bindings/power/reset/gpio-restart.txt
deleted file mode 100644
index af3701bc15..0000000000
--- a/dts/Bindings/power/reset/gpio-restart.txt
+++ /dev/null
@@ -1,54 +0,0 @@
-Drive a GPIO line that can be used to restart the system from a restart
-handler.
-
-This binding supports level and edge triggered reset.  At driver load
-time, the driver will request the given gpio line and install a restart
-handler. If the optional properties 'open-source' is not found, the GPIO line
-will be driven in the inactive state.  Otherwise its not driven until
-the restart is initiated.
-
-When the system is restarted, the restart handler will be invoked in
-priority order.  The gpio is configured as an output, and driven active,
-triggering a level triggered reset condition. This will also cause an
-inactive->active edge condition, triggering positive edge triggered
-reset. After a delay specified by active-delay, the GPIO is set to
-inactive, thus causing an active->inactive edge, triggering negative edge
-triggered reset. After a delay specified by inactive-delay, the GPIO
-is driven active again.  After a delay specified by wait-delay, the
-restart handler completes allowing other restart handlers to be attempted.
-
-Required properties:
-- compatible : should be "gpio-restart".
-- gpios : The GPIO to set high/low, see "gpios property" in
-  Documentation/devicetree/bindings/gpio/gpio.txt. If the pin should be
-  low to reset the board set it to "Active Low", otherwise set
-  gpio to "Active High".
-
-Optional properties:
-- open-source : Treat the GPIO as being open source and defer driving
-  it to when the restart is initiated.  If this optional property is not
-  specified, the GPIO is initialized as an output in its inactive state.
-- priority : A priority ranging from 0 to 255 (default 128) according to
-  the following guidelines:
-	0:	Restart handler of last resort, with limited restart
-		capabilities
-	128:	Default restart handler; use if no other restart handler is
-		expected to be available, and/or if restart functionality is
-		sufficient to restart the entire system
-	255:	Highest priority restart handler, will preempt all other
-		restart handlers
-- active-delay: Delay (default 100) to wait after driving gpio active [ms]
-- inactive-delay: Delay (default 100) to wait after driving gpio inactive [ms]
-- wait-delay: Delay (default 3000) to wait after completing restart
-  sequence [ms]
-
-Examples:
-
-gpio-restart {
-	compatible = "gpio-restart";
-	gpios = <&gpio 4 0>;
-	priority = <128>;
-	active-delay = <100>;
-	inactive-delay = <100>;
-	wait-delay = <3000>;
-};
diff --git a/dts/Bindings/power/reset/gpio-restart.yaml b/dts/Bindings/power/reset/gpio-restart.yaml
new file mode 100644
index 0000000000..a72d5c7215
--- /dev/null
+++ b/dts/Bindings/power/reset/gpio-restart.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/reset/gpio-restart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GPIO controlled reset
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+description: >
+  Drive a GPIO line that can be used to restart the system from a restart handler.
+
+  This binding supports level and edge triggered reset.  At driver load time, the driver will
+  request the given gpio line and install a restart handler. If the optional properties
+  'open-source' is not found, the GPIO line will be driven in the inactive state.  Otherwise its
+  not driven until the restart is initiated.
+
+  When the system is restarted, the restart handler will be invoked in priority order.  The GPIO
+  is configured as an output, and driven active, triggering a level triggered reset condition.
+  This will also cause an inactive->active edge condition, triggering positive edge triggered
+  reset. After a delay specified by active-delay, the GPIO is set to inactive, thus causing an
+  active->inactive edge, triggering negative edge triggered reset. After a delay specified by
+  inactive-delay, the GPIO is driven active again.  After a delay specified by wait-delay, the
+  restart handler completes allowing other restart handlers to be attempted.
+
+properties:
+  compatible:
+    const: gpio-restart
+
+  gpios:
+    description: The GPIO to set high/low, see "gpios property" in
+      Documentation/devicetree/bindings/gpio/gpio.txt. If the pin should be low to reset the board
+      set it to "Active Low", otherwise set GPIO to "Active High".
+
+  open-source:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: Treat the GPIO as being open source and defer driving it to when the restart is
+      initiated.  If this optional property is not specified, the GPIO is initialized as an output
+      in its inactive state.
+
+  priority:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      A priority ranging from 0 to 255 (default 129) according to the following guidelines:
+
+        0:   Restart handler of last resort, with limited restart capabilities.
+        128: Default restart handler; use if no other restart handler is expected to be available,
+             and/or if restart functionality is sufficient to restart the entire system.
+        255: Highest priority restart handler, will preempt all other restart handlers.
+    minimum: 0
+    maximum: 255
+    default: 129
+
+  active-delay:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Delay (default 100) to wait after driving gpio active [ms]
+    default: 100
+
+  inactive-delay:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Delay (default 100) to wait after driving gpio inactive [ms]
+    default: 100
+
+  wait-delay:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Delay (default 3000) to wait after completing restart sequence [ms]
+    default: 100
+
+additionalProperties: false
+
+required:
+  - compatible
+  - gpios
+
+examples:
+  - |
+    gpio-restart {
+      compatible = "gpio-restart";
+      gpios = <&gpio 4 0>;
+      priority = <128>;
+      active-delay = <100>;
+      inactive-delay = <100>;
+      wait-delay = <3000>;
+    };
diff --git a/dts/Bindings/power/supply/maxim,max17040.yaml b/dts/Bindings/power/supply/maxim,max17040.yaml
index ffb344987a..6b4588a325 100644
--- a/dts/Bindings/power/supply/maxim,max17040.yaml
+++ b/dts/Bindings/power/supply/maxim,max17040.yaml
@@ -44,7 +44,9 @@ properties:
       SoC == State of Charge == Capacity.
 
   maxim,rcomp:
-    $ref: /schemas/types.yaml#/definitions/uint32
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    minItems: 1
+    maxItems: 2
     description: |
       A value to compensate readings for various battery chemistries and operating temperatures.
       max17040,41 have 2 byte rcomp, default to 0x97 0x00.
diff --git a/dts/Bindings/power/supply/maxim,max77976.yaml b/dts/Bindings/power/supply/maxim,max77976.yaml
new file mode 100644
index 0000000000..675b9b26d2
--- /dev/null
+++ b/dts/Bindings/power/supply/maxim,max77976.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/maxim,max77976.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim Integrated MAX77976 Battery charger
+
+maintainers:
+  - Luca Ceresoli <luca@lucaceresoli.net>
+
+description: |
+  The Maxim MAX77976 is a 19Vin / 5.5A, 1-Cell Li+ battery charger
+  configured via I2C.
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: maxim,max77976
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      charger@6b {
+        compatible = "maxim,max77976";
+        reg = <0x6b>;
+      };
+    };
+
+...
diff --git a/dts/Bindings/power/supply/qcom,pm8941-charger.yaml b/dts/Bindings/power/supply/qcom,pm8941-charger.yaml
index bc8904872d..caeff68c66 100644
--- a/dts/Bindings/power/supply/qcom,pm8941-charger.yaml
+++ b/dts/Bindings/power/supply/qcom,pm8941-charger.yaml
@@ -11,7 +11,9 @@ maintainers:
 
 properties:
   compatible:
-    const: qcom,pm8941-charger
+    enum:
+      - qcom,pm8226-charger
+      - qcom,pm8941-charger
 
   reg:
     maxItems: 1
diff --git a/dts/Bindings/pwm/brcm,bcm7038-pwm.txt b/dts/Bindings/pwm/brcm,bcm7038-pwm.txt
deleted file mode 100644
index 0e662d7f6b..0000000000
--- a/dts/Bindings/pwm/brcm,bcm7038-pwm.txt
+++ /dev/null
@@ -1,20 +0,0 @@
-Broadcom BCM7038 PWM controller (BCM7xxx Set Top Box PWM controller)
-
-Required properties:
-
-- compatible: must be "brcm,bcm7038-pwm"
-- reg: physical base address and length for this controller
-- #pwm-cells: should be 2. See pwm.yaml in this directory for a description
-  of the cells format
-- clocks: a phandle to the reference clock for this block which is fed through
-  its internal variable clock frequency generator
-
-
-Example:
-
-	pwm: pwm@f0408000 {
-		compatible = "brcm,bcm7038-pwm";
-		reg = <0xf0408000 0x28>;
-		#pwm-cells = <2>;
-		clocks = <&upg_fixed>;
-	};
diff --git a/dts/Bindings/pwm/brcm,bcm7038-pwm.yaml b/dts/Bindings/pwm/brcm,bcm7038-pwm.yaml
new file mode 100644
index 0000000000..4080e098f7
--- /dev/null
+++ b/dts/Bindings/pwm/brcm,bcm7038-pwm.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/brcm,bcm7038-pwm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM7038 PWM controller (BCM7xxx Set Top Box PWM controller)
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+allOf:
+  - $ref: pwm.yaml#
+
+properties:
+  compatible:
+    const: brcm,bcm7038-pwm
+
+  reg:
+    maxItems: 1
+
+  "#pwm-cells":
+    const: 2
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - "#pwm-cells"
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    pwm: pwm@f0408000 {
+       compatible = "brcm,bcm7038-pwm";
+       reg = <0xf0408000 0x28>;
+       #pwm-cells = <2>;
+       clocks = <&upg_fixed>;
+    };
diff --git a/dts/Bindings/pwm/pwm.yaml b/dts/Bindings/pwm/pwm.yaml
index 2effe6c0de..3c01f85029 100644
--- a/dts/Bindings/pwm/pwm.yaml
+++ b/dts/Bindings/pwm/pwm.yaml
@@ -9,6 +9,8 @@ title: PWM controllers (providers)
 maintainers:
   - Thierry Reding <thierry.reding@gmail.com>
 
+select: false
+
 properties:
   $nodename:
     pattern: "^pwm(@.*|-[0-9a-f])*$"
diff --git a/dts/Bindings/regulator/dlg,da9121.yaml b/dts/Bindings/regulator/dlg,da9121.yaml
index 228018c87b..24ace6e1e5 100644
--- a/dts/Bindings/regulator/dlg,da9121.yaml
+++ b/dts/Bindings/regulator/dlg,da9121.yaml
@@ -17,27 +17,39 @@ description: |
   Dialog Semiconductor DA9130 Single-channel 10A double-phase buck converter
   Dialog Semiconductor DA9131 Double-channel  5A single-phase buck converter
   Dialog Semiconductor DA9132 Double-channel  3A single-phase buck converter
-
-  Current limits
-
-  This is PER PHASE, and the current limit setting in the devices reflect
-  that with a maximum 10A limit. Allowing for transients at/near double
-  the rated current, this translates across the device range to per
-  channel figures as so...
-
-                               | DA9121    DA9122     DA9220    DA9217   DA9140
-                               | /DA9130   /DA9131    /DA9132
-    -----------------------------------------------------------------------------
-    Output current / channel   | 10000000   5000000   3000000   6000000  40000000
-    Output current / phase     |  5000000   5000000   3000000   3000000   9500000
-    -----------------------------------------------------------------------------
-    Min regulator-min-microvolt|   300000    300000    300000    300000    500000
-    Max regulator-max-microvolt|  1900000   1900000   1900000   1900000   1000000
-    Device hardware default    |  1000000   1000000   1000000   1000000   1000000
-    -----------------------------------------------------------------------------
-    Min regulator-min-microamp |  7000000   3500000   3500000   7000000  26000000
-    Max regulator-max-microamp | 20000000  10000000   6000000  12000000  78000000
-    Device hardware default    | 15000000   7500000   5500000  11000000  58000000
+  Dialog Semiconductor DA9141 Single-channel 40A   quad-phase buck converter
+  Dialog Semiconductor DA9142 Single-channel 20A double-phase buck converter
+
+  Device parameter ranges
+
+  The current limits can be set to at/near double the rated current per channel
+  to allow for transient peaks.
+  Current limit changes when the output is enabled are not supported, as a
+  precaution against undefined behaviour.
+
+  |----------------------------------------------|
+  |               | range & reset default value  |
+  | Device        |------------------------------|
+  |               | microvolt    | microamp      |
+  |----------------------------------------------|
+  | DA9121/DA9130 | Min:  300000 | Min:  7000000 |
+  |               | Max: 1900000 | Max: 20000000 |
+  |----------------------------------------------|
+  | DA9121/DA9131 | Min:  300000 | Min:  3500000 |
+  |               | Max: 1900000 | Max: 10000000 |
+  |----------------------------------------------|
+  | DA9121/DA9131 | Min:  300000 | Min:  3500000 |
+  |               | Max: 1900000 | Max:  6000000 |
+  |----------------------------------------------|
+  | DA9217        | Min:  300000 | Min:  7000000 |
+  |               | Max: 1900000 | Max: 12000000 |
+  |----------------------------------------------|
+  | DA9141        | Min:  300000 | Min: 26000000 |
+  |               | Max: 1300000 | Max: 78000000 |
+  |----------------------------------------------|
+  | DA9142        | Min:  300000 | Min: 13000000 |
+  |               | Max: 1300000 | Max: 39000000 |
+  |----------------------------------------------|
 
 properties:
   $nodename:
@@ -51,7 +63,8 @@ properties:
       - dlg,da9130
       - dlg,da9131
       - dlg,da9132
-      - dlg,da9140
+      - dlg,da9141
+      - dlg,da9142
 
   reg:
     maxItems: 1
@@ -70,26 +83,24 @@ properties:
 
   regulators:
     type: object
-    $ref: regulator.yaml#
     description: |
-      This node defines the settings for the BUCK. The content of the
-      sub-node is defined by the standard binding for regulators; see regulator.yaml.
-      The DA9121 regulator is bound using their names listed below
-      buck1 - BUCK1
-      buck2 - BUCK2       //DA9122, DA9220, DA9131, DA9132 only
+      List of regulators provided by the device
 
     patternProperties:
       "^buck([1-2])$":
         type: object
         $ref: regulator.yaml#
+        description: |
+          Properties for a single BUCK regulator
 
         properties:
-          regulator-mode:
-            maxItems: 1
-            description: Defined in include/dt-bindings/regulator/dlg,da9121-regulator.h
+          regulator-name:
+            pattern: "^BUCK([1-2])$"
+            description: |
+              BUCK2 present in DA9122, DA9220, DA9131, DA9132 only
 
           regulator-initial-mode:
-            maxItems: 1
+            enum: [ 0, 1, 2, 3 ]
             description: Defined in include/dt-bindings/regulator/dlg,da9121-regulator.h
 
           enable-gpios:
@@ -98,6 +109,7 @@ properties:
 
           dlg,ripple-cancel:
             $ref: "/schemas/types.yaml#/definitions/uint32"
+            enum: [ 0, 1, 2, 3 ]
             description: |
               Defined in include/dt-bindings/regulator/dlg,da9121-regulator.h
               Only present on multi-channel devices (DA9122, DA9220, DA9131, DA9132)
diff --git a/dts/Bindings/regulator/max77686.txt b/dts/Bindings/regulator/max77686.txt
deleted file mode 100644
index ff3d2dec8c..0000000000
--- a/dts/Bindings/regulator/max77686.txt
+++ /dev/null
@@ -1,71 +0,0 @@
-Binding for Maxim MAX77686 regulators
-
-This is a part of the device tree bindings of MAX77686 multi-function device.
-More information can be found in ../mfd/max77686.txt file.
-
-The MAX77686 PMIC has 9 high-efficiency Buck and 26 Low-DropOut (LDO)
-regulators that can be controlled over I2C.
-
-Following properties should be present in main device node of the MFD chip.
-
-Optional node:
-- voltage-regulators : The regulators of max77686 have to be instantiated
-  under subnode named "voltage-regulators" using the following format.
-
-	regulator_name {
-		regulator-compatible = LDOn/BUCKn
-		standard regulator constraints....
-	};
-	refer Documentation/devicetree/bindings/regulator/regulator.txt
-
-  The regulator node's name should be initialized with a string
-to get matched with their hardware counterparts as follow:
-
-	-LDOn 	:	for LDOs, where n can lie in range 1 to 26.
-			example: LDO1, LDO2, LDO26.
-	-BUCKn 	:	for BUCKs, where n can lie in range 1 to 9.
-			example: BUCK1, BUCK5, BUCK9.
-
-  Regulators which can be turned off during system suspend:
-	-LDOn	:	2, 6-8, 10-12, 14-16,
-	-BUCKn	:	1-4.
-  Use standard regulator bindings for it ('regulator-off-in-suspend').
-
-  LDO20, LDO21, LDO22, BUCK8 and BUCK9 can be configured to GPIO enable
-  control. To turn this feature on this property must be added to the regulator
-  sub-node:
-	- maxim,ena-gpios :	one GPIO specifier enable control (the gpio
-				flags are actually ignored and always
-				ACTIVE_HIGH is used)
-
-Example:
-
-	max77686: pmic@9 {
-		compatible = "maxim,max77686";
-		interrupt-parent = <&wakeup_eint>;
-		interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
-		reg = <0x09>;
-
-		voltage-regulators {
-			ldo11_reg: LDO11 {
-				regulator-name = "vdd_ldo11";
-				regulator-min-microvolt = <1900000>;
-				regulator-max-microvolt = <1900000>;
-				regulator-always-on;
-			};
-
-			buck1_reg: BUCK1 {
-				regulator-name = "vdd_mif";
-				regulator-min-microvolt = <950000>;
-				regulator-max-microvolt = <1300000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck9_reg: BUCK9 {
-				regulator-name = "CAM_ISP_CORE_1.2V";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1200000>;
-				maxim,ena-gpios = <&gpm0 3 GPIO_ACTIVE_HIGH>;
-			};
-	};
diff --git a/dts/Bindings/regulator/maxim,max20086.yaml b/dts/Bindings/regulator/maxim,max20086.yaml
new file mode 100644
index 0000000000..05f7239118
--- /dev/null
+++ b/dts/Bindings/regulator/maxim,max20086.yaml
@@ -0,0 +1,106 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/maxim,max20086.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim Integrated MAX20086-MAX20089 Camera Power Protector
+
+maintainers:
+  - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+
+description: |
+  The MAX20086-MAX20089 are dual/quad camera power protectors, designed to
+  deliver power over coax for radar and camera modules. They support
+  software-configurable output switching and monitoring. The output voltage and
+  current limit are fixed by the hardware design.
+
+properties:
+  compatible:
+    enum:
+      - maxim,max20086
+      - maxim,max20087
+      - maxim,max20088
+      - maxim,max20089
+
+  reg:
+    maxItems: 1
+
+  enable-gpios:
+    maxItems: 1
+    description: GPIO connected to the EN pin, active high
+
+  in-supply:
+    description: Input supply for the camera outputs (IN pin, 3.0V to 15.0V)
+
+  vdd-supply:
+    description: Input supply for the device (VDD pin, 3.0V to 5.5V)
+
+  regulators:
+    type: object
+
+    patternProperties:
+      "^OUT[1-4]$":
+        type: object
+        $ref: regulator.yaml#
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - in-supply
+  - vdd-supply
+  - regulators
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - maxim,max20088
+              - maxim,max20089
+    then:
+      properties:
+        regulators:
+          properties:
+            OUT3: false
+            OUT4: false
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        regulator@28 {
+            compatible = "maxim,max20087";
+            reg = <0x28>;
+
+            in-supply = <&reg_12v0>;
+            vdd-supply = <&reg_3v3>;
+
+            enable-gpios = <&gpio 108 GPIO_ACTIVE_HIGH>;
+
+            regulators {
+                OUT1 {
+                    regulator-name = "VOUT1";
+                };
+                OUT2 {
+                    regulator-name = "VOUT2";
+                };
+                OUT3 {
+                    regulator-name = "VOUT3";
+                };
+                OUT4 {
+                    regulator-name = "VOUT4";
+                };
+            };
+        };
+    };
+...
diff --git a/dts/Bindings/regulator/maxim,max77686.yaml b/dts/Bindings/regulator/maxim,max77686.yaml
new file mode 100644
index 0000000000..bb64b679f7
--- /dev/null
+++ b/dts/Bindings/regulator/maxim,max77686.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/maxim,max77686.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX77686 Power Management IC regulators
+
+maintainers:
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+
+description: |
+  This is a part of device tree bindings for Maxim MAX77686 Power Management
+  Integrated Circuit (PMIC).
+
+  The Maxim MAX77686 provides high-efficiency Buck and 26 Low-DropOut (LDO)
+  regulators.
+
+  See also Documentation/devicetree/bindings/mfd/maxim,max77686.yaml for
+  additional information and example.
+
+patternProperties:
+  # 26 LDOs
+  "^LDO([1-9]|1[0-9]|2[3-6])$":
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description: |
+      Properties for single LDO regulator.
+      Regulators which can be turned off during system suspend:
+        LDO2, LDO6-8, LDO10-12, LDO14-16
+
+    required:
+      - regulator-name
+
+  # LDO20-LDO22 with maxim,ena-gpios
+  "^LDO2[0-2]$":
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description: |
+      Properties for single LDO regulator.
+
+    properties:
+      maxim,ena-gpios:
+        maxItems: 1
+        description: |
+          GPIO specifier to enable the GPIO control (on/off) for regulator.
+
+    required:
+      - regulator-name
+
+  # 9 bucks
+  "^BUCK[1-7]$":
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description: |
+      Properties for single BUCK regulator.
+      Regulators which can be turned off during system suspend:
+      BUCK[1-4]
+
+    required:
+      - regulator-name
+
+  "^BUCK[89]$":
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description: |
+      Properties for single BUCK regulator.
+
+    properties:
+      maxim,ena-gpios:
+        maxItems: 1
+        description: |
+          GPIO specifier to enable the GPIO control (on/off) for regulator.
+
+    required:
+      - regulator-name
+
+additionalProperties: false
diff --git a/dts/Bindings/regulator/maxim,max8973.yaml b/dts/Bindings/regulator/maxim,max8973.yaml
index 5452282726..35c53e27f7 100644
--- a/dts/Bindings/regulator/maxim,max8973.yaml
+++ b/dts/Bindings/regulator/maxim,max8973.yaml
@@ -86,6 +86,9 @@ properties:
   reg:
     maxItems: 1
 
+  interrupts:
+    maxItems: 1
+
 required:
   - compatible
   - reg
diff --git a/dts/Bindings/regulator/qcom,rpmh-regulator.yaml b/dts/Bindings/regulator/qcom,rpmh-regulator.yaml
index b959504e0e..5c73d3f639 100644
--- a/dts/Bindings/regulator/qcom,rpmh-regulator.yaml
+++ b/dts/Bindings/regulator/qcom,rpmh-regulator.yaml
@@ -43,6 +43,7 @@ description: |
       For PM8150L, smps1 - smps8, ldo1 - ldo11, bob, flash, rgb
       For PM8350, smps1 - smps12, ldo1 - ldo10
       For PM8350C, smps1 - smps10, ldo1 - ldo13, bob
+      For PM8450, smps1 - smps6, ldo1 - ldo4
       For PM8998, smps1 - smps13, ldo1 - ldo28, lvs1 - lvs2
       For PMI8998, bob
       For PMR735A, smps1 - smps3, ldo1 - ldo7
@@ -62,7 +63,9 @@ properties:
       - qcom,pm8150l-rpmh-regulators
       - qcom,pm8350-rpmh-regulators
       - qcom,pm8350c-rpmh-regulators
+      - qcom,pm8450-rpmh-regulators
       - qcom,pm8998-rpmh-regulators
+      - qcom,pmg1110-rpmh-regulators
       - qcom,pmi8998-rpmh-regulators
       - qcom,pmm8155au-rpmh-regulators
       - qcom,pmr735a-rpmh-regulators
diff --git a/dts/Bindings/regulator/qcom,spmi-regulator.txt b/dts/Bindings/regulator/qcom,spmi-regulator.txt
index 2b544059e0..c2a39b121b 100644
--- a/dts/Bindings/regulator/qcom,spmi-regulator.txt
+++ b/dts/Bindings/regulator/qcom,spmi-regulator.txt
@@ -6,6 +6,7 @@ Qualcomm SPMI Regulators
 	Definition: must be one of:
 			"qcom,pm8004-regulators"
 			"qcom,pm8005-regulators"
+			"qcom,pm8226-regulators"
 			"qcom,pm8841-regulators"
 			"qcom,pm8916-regulators"
 			"qcom,pm8941-regulators"
diff --git a/dts/Bindings/regulator/regulator.yaml b/dts/Bindings/regulator/regulator.yaml
index a6ae9ecae5..ed560ee871 100644
--- a/dts/Bindings/regulator/regulator.yaml
+++ b/dts/Bindings/regulator/regulator.yaml
@@ -218,7 +218,7 @@ properties:
     description: Array of maximum spread between voltages of coupled regulators
       in microvolts, each value in the array relates to the corresponding
       couple specified by the regulator-coupled-with property.
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: "/schemas/types.yaml#/definitions/uint32-array"
 
   regulator-max-step-microvolt:
     description: Maximum difference between current and target voltages
diff --git a/dts/Bindings/regulator/rohm,bd70528-regulator.txt b/dts/Bindings/regulator/rohm,bd70528-regulator.txt
deleted file mode 100644
index 698cfc3bc3..0000000000
--- a/dts/Bindings/regulator/rohm,bd70528-regulator.txt
+++ /dev/null
@@ -1,68 +0,0 @@
-ROHM BD70528 Power Management Integrated Circuit regulator bindings
-
-Required properties:
- - regulator-name: should be "buck1", "buck2", "buck3", "ldo1", "ldo2", "ldo3",
-		   "led_ldo1", "led_ldo2"
-
-List of regulators provided by this controller. BD70528 regulators node
-should be sub node of the BD70528 MFD node. See BD70528 MFD bindings at
-Documentation/devicetree/bindings/mfd/rohm,bd70528-pmic.txt
-
-The valid names for BD70528 regulator nodes are:
-BUCK1, BUCK2, BUCK3, LDO1, LDO2, LDO3, LED_LDO1, LED_LDO2
-
-Optional properties:
-- Any optional property defined in bindings/regulator/regulator.txt
-
-Example:
-regulators {
-	buck1: BUCK1 {
-		regulator-name = "buck1";
-		regulator-min-microvolt = <1200000>;
-		regulator-max-microvolt = <3400000>;
-		regulator-boot-on;
-		regulator-ramp-delay = <125>;
-	};
-	buck2: BUCK2 {
-		regulator-name = "buck2";
-		regulator-min-microvolt = <1200000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-		regulator-ramp-delay = <125>;
-	};
-	buck3: BUCK3 {
-		regulator-name = "buck3";
-		regulator-min-microvolt = <800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-boot-on;
-		regulator-ramp-delay = <250>;
-	};
-	ldo1: LDO1 {
-		regulator-name = "ldo1";
-		regulator-min-microvolt = <1650000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-	};
-	ldo2: LDO2 {
-		regulator-name = "ldo2";
-		regulator-min-microvolt = <1650000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-	};
-
-	ldo3: LDO3 {
-		regulator-name = "ldo3";
-		regulator-min-microvolt = <1650000>;
-		regulator-max-microvolt = <3300000>;
-	};
-	led_ldo1: LED_LDO1 {
-		regulator-name = "led_ldo1";
-		regulator-min-microvolt = <200000>;
-		regulator-max-microvolt = <300000>;
-	};
-	led_ldo2: LED_LDO2 {
-		regulator-name = "led_ldo2";
-		regulator-min-microvolt = <200000>;
-		regulator-max-microvolt = <300000>;
-	};
-};
diff --git a/dts/Bindings/regulator/samsung,s5m8767.yaml b/dts/Bindings/regulator/samsung,s5m8767.yaml
index c98929a213..3c1617b668 100644
--- a/dts/Bindings/regulator/samsung,s5m8767.yaml
+++ b/dts/Bindings/regulator/samsung,s5m8767.yaml
@@ -67,8 +67,9 @@ patternProperties:
     required:
       - regulator-name
 
+properties:
   # 9 buck
-  "^BUCK9$":
+  BUCK9:
     type: object
     $ref: regulator.yaml#
     unevaluatedProperties: false
diff --git a/dts/Bindings/remoteproc/qcom,adsp.yaml b/dts/Bindings/remoteproc/qcom,adsp.yaml
index 63e06d93bc..c635c181d2 100644
--- a/dts/Bindings/remoteproc/qcom,adsp.yaml
+++ b/dts/Bindings/remoteproc/qcom,adsp.yaml
@@ -33,6 +33,9 @@ properties:
       - qcom,sdm845-adsp-pas
       - qcom,sdm845-cdsp-pas
       - qcom,sdx55-mpss-pas
+      - qcom,sm6350-adsp-pas
+      - qcom,sm6350-cdsp-pas
+      - qcom,sm6350-mpss-pas
       - qcom,sm8150-adsp-pas
       - qcom,sm8150-cdsp-pas
       - qcom,sm8150-mpss-pas
@@ -158,6 +161,9 @@ allOf:
               - qcom,sc8180x-mpss-pas
               - qcom,sdm845-adsp-pas
               - qcom,sdm845-cdsp-pas
+              - qcom,sm6350-adsp-pas
+              - qcom,sm6350-cdsp-pas
+              - qcom,sm6350-mpss-pas
               - qcom,sm8150-adsp-pas
               - qcom,sm8150-cdsp-pas
               - qcom,sm8150-mpss-pas
@@ -266,6 +272,8 @@ allOf:
               - qcom,sc8180x-cdsp-pas
               - qcom,sdm845-adsp-pas
               - qcom,sdm845-cdsp-pas
+              - qcom,sm6350-adsp-pas
+              - qcom,sm6350-cdsp-pas
               - qcom,sm8150-adsp-pas
               - qcom,sm8150-cdsp-pas
               - qcom,sm8150-slpi-pas
@@ -301,6 +309,7 @@ allOf:
               - qcom,sc7280-mpss-pas
               - qcom,sc8180x-mpss-pas
               - qcom,sdx55-mpss-pas
+              - qcom,sm6350-mpss-pas
               - qcom,sm8150-mpss-pas
               - qcom,sm8350-mpss-pas
     then:
@@ -390,6 +399,23 @@ allOf:
         compatible:
           contains:
             enum:
+              - qcom,sm6350-cdsp-pas
+    then:
+      properties:
+        power-domains:
+          items:
+            - description: CX power domain
+            - description: MX power domain
+        power-domain-names:
+          items:
+            - const: cx
+            - const: mx
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
               - qcom,sm8150-adsp-pas
               - qcom,sm8150-cdsp-pas
     then:
@@ -405,6 +431,7 @@ allOf:
             enum:
               - qcom,sc7280-mpss-pas
               - qcom,sdx55-mpss-pas
+              - qcom,sm6350-mpss-pas
               - qcom,sm8150-mpss-pas
               - qcom,sm8350-mpss-pas
     then:
@@ -425,6 +452,7 @@ allOf:
             enum:
               - qcom,sc8180x-adsp-pas
               - qcom,sc8180x-cdsp-pas
+              - qcom,sm6350-adsp-pas
               - qcom,sm8150-slpi-pas
               - qcom,sm8250-adsp-pas
               - qcom,sm8250-slpi-pas
diff --git a/dts/Bindings/remoteproc/renesas,rcar-rproc.yaml b/dts/Bindings/remoteproc/renesas,rcar-rproc.yaml
new file mode 100644
index 0000000000..a7d25fa920
--- /dev/null
+++ b/dts/Bindings/remoteproc/renesas,rcar-rproc.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/remoteproc/renesas,rcar-rproc.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Renesas R-Car remote processor controller bindings
+
+maintainers:
+  - Julien Massot <julien.massot@iot.bzh>
+
+description: |
+  This document defines the bindings for the remoteproc component that loads and
+  boots firmwares on the Renesas R-Car family chipset.
+  R-Car gen3 family may have a realtime processor, this processor shares peripheral
+  and RAM with the host processor with the same address map.
+
+properties:
+  compatible:
+    const: renesas,rcar-cr7
+
+  resets:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  memory-region:
+    description:
+      List of phandles to the reserved memory regions associated with the
+      remoteproc device. This is variable and describes the memories shared with
+      the remote processor (e.g. remoteproc firmware and carveouts, rpmsg
+      vrings, ...).
+      (see ../reserved-memory/reserved-memory.yaml)
+
+required:
+  - compatible
+  - resets
+  - memory-region
+  - power-domains
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7795-cpg-mssr.h>
+    #include <dt-bindings/power/r8a7795-sysc.h>
+    reserved-memory {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        cr7_ram: cr7_ram@40040000 {
+            no-map;
+            reg = <0x0 0x40040000 0x0 0x1fc0000>;
+        };
+    };
+
+    cr7_rproc: cr7 {
+        compatible = "renesas,rcar-cr7";
+        memory-region = <&cr7_ram>;
+        power-domains = <&sysc R8A7795_PD_CR7>;
+        resets = <&cpg 222>;
+    };
+
+...
diff --git a/dts/Bindings/remoteproc/ti,k3-dsp-rproc.yaml b/dts/Bindings/remoteproc/ti,k3-dsp-rproc.yaml
index 5ec6505ac4..7b56497eec 100644
--- a/dts/Bindings/remoteproc/ti,k3-dsp-rproc.yaml
+++ b/dts/Bindings/remoteproc/ti,k3-dsp-rproc.yaml
@@ -33,9 +33,11 @@ properties:
     enum:
       - ti,j721e-c66-dsp
       - ti,j721e-c71-dsp
+      - ti,j721s2-c71-dsp
     description:
       Use "ti,j721e-c66-dsp" for C66x DSPs on K3 J721E SoCs
       Use "ti,j721e-c71-dsp" for C71x DSPs on K3 J721E SoCs
+      Use "ti,j721s2-c71-dsp" for C71x DSPs on K3 J721S2 SoCs
 
   resets:
     description: |
@@ -106,6 +108,7 @@ else:
       compatible:
         enum:
           - ti,j721e-c71-dsp
+          - ti,j721s2-c71-dsp
   then:
     properties:
       reg:
diff --git a/dts/Bindings/remoteproc/ti,k3-r5f-rproc.yaml b/dts/Bindings/remoteproc/ti,k3-r5f-rproc.yaml
index eeef255c40..d9c7e8c2b2 100644
--- a/dts/Bindings/remoteproc/ti,k3-r5f-rproc.yaml
+++ b/dts/Bindings/remoteproc/ti,k3-r5f-rproc.yaml
@@ -38,6 +38,7 @@ properties:
       - ti,j721e-r5fss
       - ti,j7200-r5fss
       - ti,am64-r5fss
+      - ti,j721s2-r5fss
 
   power-domains:
     description: |
@@ -64,9 +65,9 @@ properties:
     description: |
       Configuration Mode for the Dual R5F cores within the R5F cluster.
       Should be either a value of 1 (LockStep mode) or 0 (Split mode) on
-      most SoCs (AM65x, J721E, J7200), default is LockStep mode if omitted;
-      and should be either a value of 0 (Split mode) or 2 (Single-CPU mode)
-      on AM64x SoCs, default is Split mode if omitted.
+      most SoCs (AM65x, J721E, J7200, J721s2), default is LockStep mode if
+      omitted; and should be either a value of 0 (Split mode) or 2
+      (Single-CPU mode) on AM64x SoCs, default is Split mode if omitted.
 
 # R5F Processor Child Nodes:
 # ==========================
@@ -104,6 +105,7 @@ patternProperties:
           - ti,j721e-r5f
           - ti,j7200-r5f
           - ti,am64-r5f
+          - ti,j721s2-r5f
 
       reg:
         items:
diff --git a/dts/Bindings/reserved-memory/nvidia,tegra210-emc-table.yaml b/dts/Bindings/reserved-memory/nvidia,tegra210-emc-table.yaml
new file mode 100644
index 0000000000..035a50fe3e
--- /dev/null
+++ b/dts/Bindings/reserved-memory/nvidia,tegra210-emc-table.yaml
@@ -0,0 +1,31 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reserved-memory/nvidia,tegra210-emc-table.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra210 EMC Frequency Table Device Tree Bindings
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+description: On Tegra210, firmware passes a binary representation of the
+  EMC frequency table via a reserved memory region.
+
+allOf:
+  - $ref: "reserved-memory.yaml"
+
+properties:
+  compatible:
+    const: nvidia,tegra210-emc-table
+
+  reg:
+    description: region of memory reserved by firmware to pass the EMC
+      frequency table
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
diff --git a/dts/Bindings/reserved-memory/qcom,cmd-db.txt b/dts/Bindings/reserved-memory/qcom,cmd-db.txt
deleted file mode 100644
index 68395530c0..0000000000
--- a/dts/Bindings/reserved-memory/qcom,cmd-db.txt
+++ /dev/null
@@ -1,37 +0,0 @@
-Command DB
----------
-
-Command DB is a database that provides a mapping between resource key and the
-resource address for a system resource managed by a remote processor. The data
-is stored in a shared memory region and is loaded by the remote processor.
-
-Some of the Qualcomm Technologies Inc SoC's have hardware accelerators for
-controlling shared resources. Depending on the board configuration the shared
-resource properties may change. These properties are dynamically probed by the
-remote processor and made available in the shared memory.
-
-The bindings for Command DB is specified in the reserved-memory section in
-devicetree. The devicetree representation of the command DB driver should be:
-
-Properties:
-- compatible:
-	Usage: required
-	Value type: <string>
-	Definition: Should be "qcom,cmd-db"
-
-- reg:
-	Usage: required
-	Value type: <prop encoded array>
-	Definition: The register address that points to the actual location of
-		    the Command DB in memory.
-
-Example:
-
-	reserved-memory {
-		[...]
-		reserved-memory@85fe0000 {
-			reg = <0x0 0x85fe0000 0x0 0x20000>;
-			compatible = "qcom,cmd-db";
-			no-map;
-		};
-	};
diff --git a/dts/Bindings/reserved-memory/qcom,cmd-db.yaml b/dts/Bindings/reserved-memory/qcom,cmd-db.yaml
new file mode 100644
index 0000000000..df1b5e0ed3
--- /dev/null
+++ b/dts/Bindings/reserved-memory/qcom,cmd-db.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/reserved-memory/qcom,cmd-db.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm Command DB
+
+description: |
+  Command DB is a database that provides a mapping between resource key and the
+  resource address for a system resource managed by a remote processor. The data
+  is stored in a shared memory region and is loaded by the remote processor.
+
+  Some of the Qualcomm Technologies Inc SoC's have hardware accelerators for
+  controlling shared resources. Depending on the board configuration the shared
+  resource properties may change. These properties are dynamically probed by the
+  remote processor and made available in the shared memory.
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+allOf:
+  - $ref: "reserved-memory.yaml"
+
+properties:
+  compatible:
+    const: qcom,cmd-db
+
+required:
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    reserved-memory {
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        reserved-memory@85fe0000 {
+            reg = <0x85fe0000 0x20000>;
+            compatible = "qcom,cmd-db";
+            no-map;
+        };
+    };
diff --git a/dts/Bindings/reserved-memory/qcom,rmtfs-mem.txt b/dts/Bindings/reserved-memory/qcom,rmtfs-mem.txt
deleted file mode 100644
index 8562ba1dce..0000000000
--- a/dts/Bindings/reserved-memory/qcom,rmtfs-mem.txt
+++ /dev/null
@@ -1,51 +0,0 @@
-Qualcomm Remote File System Memory binding
-
-This binding describes the Qualcomm remote filesystem memory, which serves the
-purpose of describing the shared memory region used for remote processors to
-access block device data using the Remote Filesystem protocol.
-
-- compatible:
-	Usage: required
-	Value type: <stringlist>
-	Definition: must be:
-		    "qcom,rmtfs-mem"
-
-- reg:
-	Usage: required for static allocation
-	Value type: <prop-encoded-array>
-	Definition: must specify base address and size of the memory region,
-		    as described in reserved-memory.txt
-
-- size:
-	Usage: required for dynamic allocation
-	Value type: <prop-encoded-array>
-	Definition: must specify a size of the memory region, as described in
-		    reserved-memory.txt
-
-- qcom,client-id:
-	Usage: required
-	Value type: <u32>
-	Definition: identifier of the client to use this region for buffers.
-
-- qcom,vmid:
-	Usage: optional
-	Value type: <u32>
-	Definition: vmid of the remote processor, to set up memory protection.
-
-= EXAMPLE
-The following example shows the remote filesystem memory setup for APQ8016,
-with the rmtfs region for the Hexagon DSP (id #1) located at 0x86700000.
-
-	reserved-memory {
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-
-		rmtfs@86700000 {
-			compatible = "qcom,rmtfs-mem";
-			reg = <0x0 0x86700000 0x0 0xe0000>;
-			no-map;
-
-			qcom,client-id = <1>;
-		};
-	};
diff --git a/dts/Bindings/reserved-memory/qcom,rmtfs-mem.yaml b/dts/Bindings/reserved-memory/qcom,rmtfs-mem.yaml
new file mode 100644
index 0000000000..2998f1c8f0
--- /dev/null
+++ b/dts/Bindings/reserved-memory/qcom,rmtfs-mem.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/reserved-memory/qcom,rmtfs-mem.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm Remote File System Memory
+
+description: |
+  This binding describes the Qualcomm remote filesystem memory, which serves the
+  purpose of describing the shared memory region used for remote processors to
+  access block device data using the Remote Filesystem protocol.
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+allOf:
+  - $ref: "reserved-memory.yaml"
+
+properties:
+  compatible:
+    const: qcom,rmtfs-mem
+
+  qcom,client-id:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: >
+      identifier of the client to use this region for buffers
+
+  qcom,vmid:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: >
+      vmid of the remote processor, to set up memory protection
+
+required:
+  - qcom,client-id
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    reserved-memory {
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        rmtfs@86700000 {
+            compatible = "qcom,rmtfs-mem";
+            reg = <0x86700000 0xe0000>;
+            no-map;
+
+            qcom,client-id = <1>;
+        };
+    };
diff --git a/dts/Bindings/reset/brcm,brcmstb-reset.txt b/dts/Bindings/reset/brcm,brcmstb-reset.txt
deleted file mode 100644
index ee59409640..0000000000
--- a/dts/Bindings/reset/brcm,brcmstb-reset.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-Broadcom STB SW_INIT-style reset controller
-===========================================
-
-Broadcom STB SoCs have a SW_INIT-style reset controller with separate
-SET/CLEAR/STATUS registers and possibly multiple banks, each of 32 bit
-reset lines.
-
-Please also refer to reset.txt in this directory for common reset
-controller binding usage.
-
-Required properties:
-- compatible: should be brcm,brcmstb-reset
-- reg: register base and length
-- #reset-cells: must be set to 1
-
-Example:
-
-	reset: reset-controller@8404318 {
-		compatible = "brcm,brcmstb-reset";
-		reg = <0x8404318 0x30>;
-		#reset-cells = <1>;
-	};
-
-	&ethernet_switch {
-		resets = <&reset 26>;
-		reset-names = "switch";
-	};
diff --git a/dts/Bindings/reset/brcm,brcmstb-reset.yaml b/dts/Bindings/reset/brcm,brcmstb-reset.yaml
new file mode 100644
index 0000000000..e00efa88a1
--- /dev/null
+++ b/dts/Bindings/reset/brcm,brcmstb-reset.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/reset/brcm,brcmstb-reset.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Broadcom STB SW_INIT-style reset controller
+
+description:
+  Broadcom STB SoCs have a SW_INIT-style reset controller with separate
+  SET/CLEAR/STATUS registers and possibly multiple banks, each of 32 bit
+  reset lines.
+
+  Please also refer to reset.txt in this directory for common reset
+  controller binding usage.
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+properties:
+  compatible:
+    const: brcm,brcmstb-reset
+
+  reg:
+    maxItems: 1
+
+  "#reset-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    reset: reset-controller@8404318 {
+      compatible = "brcm,brcmstb-reset";
+      reg = <0x8404318 0x30>;
+      #reset-cells = <1>;
+    };
+
+    ethernet_switch {
+      resets = <&reset 26>;
+      reset-names = "switch";
+    };
diff --git a/dts/Bindings/reset/renesas,rst.yaml b/dts/Bindings/reset/renesas,rst.yaml
index 620cd0538b..bbe313bf17 100644
--- a/dts/Bindings/reset/renesas,rst.yaml
+++ b/dts/Bindings/reset/renesas,rst.yaml
@@ -48,6 +48,7 @@ properties:
       - renesas,r8a77990-rst      # R-Car E3
       - renesas,r8a77995-rst      # R-Car D3
       - renesas,r8a779a0-rst      # R-Car V3U
+      - renesas,r8a779f0-rst      # R-Car S4-8
 
   reg:
     maxItems: 1
diff --git a/dts/Bindings/reset/starfive,jh7100-reset.yaml b/dts/Bindings/reset/starfive,jh7100-reset.yaml
new file mode 100644
index 0000000000..300359a5e1
--- /dev/null
+++ b/dts/Bindings/reset/starfive,jh7100-reset.yaml
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/starfive,jh7100-reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive JH7100 SoC Reset Controller Device Tree Bindings
+
+maintainers:
+  - Emil Renner Berthing <kernel@esmil.dk>
+
+properties:
+  compatible:
+    enum:
+      - starfive,jh7100-reset
+
+  reg:
+    maxItems: 1
+
+  "#reset-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    reset-controller@11840000 {
+        compatible = "starfive,jh7100-reset";
+        reg = <0x11840000 0x10000>;
+        #reset-cells = <1>;
+    };
+
+...
diff --git a/dts/Bindings/rng/apm,rng.txt b/dts/Bindings/rng/apm,rng.txt
deleted file mode 100644
index 4dde4b06cd..0000000000
--- a/dts/Bindings/rng/apm,rng.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-APM X-Gene SoC random number generator.
-
-Required properties:
-
-- compatible  : should be "apm,xgene-rng"
-- reg         : specifies base physical address and size of the registers map
-- clocks      : phandle to clock-controller plus clock-specifier pair
-- interrupts  : specify the fault interrupt for the RNG device
-
-Example:
-
-	rng: rng@10520000 {
-		compatible = "apm,xgene-rng";
-		reg = <0x0 0x10520000 0x0 0x100>;
-		interrupts =   <0x0 0x41 0x4>;
-		clocks = <&rngpkaclk 0>;
-	};
diff --git a/dts/Bindings/rng/apm,x-gene-rng.yaml b/dts/Bindings/rng/apm,x-gene-rng.yaml
new file mode 100644
index 0000000000..02be143cc8
--- /dev/null
+++ b/dts/Bindings/rng/apm,x-gene-rng.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rng/apm,x-gene-rng.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: APM X-Gene SoC Random Number Generator
+
+maintainers:
+  - Khuong Dinh <khuong@os.amperecomputing.com>
+
+properties:
+  compatible:
+    const: apm,xgene-rng
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - interrupts
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        rng@10520000 {
+            compatible = "apm,xgene-rng";
+            reg = <0x0 0x10520000 0x0 0x100>;
+            interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&rngpkaclk 0>;
+        };
+    };
diff --git a/dts/Bindings/rng/atmel,at91-trng.yaml b/dts/Bindings/rng/atmel,at91-trng.yaml
new file mode 100644
index 0000000000..c1527637eb
--- /dev/null
+++ b/dts/Bindings/rng/atmel,at91-trng.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rng/atmel,at91-trng.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel AT91 True Random Number Generator
+
+maintainers:
+  - Nicolas Ferre <nicolas.ferre@microchip.com>
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+  - Ludovic Desroches <ludovic.desroches@microchip.com>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - atmel,at91sam9g45-trng
+          - microchip,sam9x60-trng
+      - items:
+          - enum:
+              - microchip,sama7g5-trng
+          - const: atmel,at91sam9g45-trng
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - interrupts
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    rng@fffcc000 {
+        compatible = "atmel,at91sam9g45-trng";
+        reg = <0xfffcc000 0x4000>;
+        interrupts = <6 IRQ_TYPE_LEVEL_HIGH 0>;
+        clocks = <&trng_clk>;
+    };
diff --git a/dts/Bindings/rng/atmel-trng.txt b/dts/Bindings/rng/atmel-trng.txt
deleted file mode 100644
index 3900ee4f35..0000000000
--- a/dts/Bindings/rng/atmel-trng.txt
+++ /dev/null
@@ -1,16 +0,0 @@
-Atmel TRNG (True Random Number Generator) block
-
-Required properties:
-- compatible : Should be "atmel,at91sam9g45-trng" or "microchip,sam9x60-trng"
-- reg : Offset and length of the register set of this block
-- interrupts : the interrupt number for the TRNG block
-- clocks: should contain the TRNG clk source
-
-Example:
-
-trng@fffcc000 {
-	compatible = "atmel,at91sam9g45-trng";
-	reg = <0xfffcc000 0x4000>;
-	interrupts = <6 IRQ_TYPE_LEVEL_HIGH 0>;
-	clocks = <&trng_clk>;
-};
diff --git a/dts/Bindings/rng/brcm,iproc-rng200.txt b/dts/Bindings/rng/brcm,iproc-rng200.txt
deleted file mode 100644
index 802523196e..0000000000
--- a/dts/Bindings/rng/brcm,iproc-rng200.txt
+++ /dev/null
@@ -1,16 +0,0 @@
-HWRNG support for the iproc-rng200 driver
-
-Required properties:
-- compatible : Must be one of:
-	       "brcm,bcm2711-rng200"
-	       "brcm,bcm7211-rng200"
-	       "brcm,bcm7278-rng200"
-	       "brcm,iproc-rng200"
-- reg : base address and size of control register block
-
-Example:
-
-rng {
-        compatible = "brcm,iproc-rng200";
-        reg = <0x18032000 0x28>;
-};
diff --git a/dts/Bindings/rng/brcm,iproc-rng200.yaml b/dts/Bindings/rng/brcm,iproc-rng200.yaml
new file mode 100644
index 0000000000..a00e9bc8b6
--- /dev/null
+++ b/dts/Bindings/rng/brcm,iproc-rng200.yaml
@@ -0,0 +1,30 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/rng/brcm,iproc-rng200.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: HWRNG support for the iproc-rng200 driver
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - brcm,bcm2711-rng200
+      - brcm,bcm7211-rng200
+      - brcm,bcm7278-rng200
+      - brcm,iproc-rng200
+
+  reg:
+    maxItems: 1
+
+additionalProperties: false
+
+examples:
+  - |
+    rng@18032000 {
+        compatible = "brcm,iproc-rng200";
+        reg = <0x18032000 0x28>;
+    };
diff --git a/dts/Bindings/rng/ks-sa-rng.txt b/dts/Bindings/rng/ks-sa-rng.txt
deleted file mode 100644
index b7a65b4879..0000000000
--- a/dts/Bindings/rng/ks-sa-rng.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-Keystone SoC Hardware Random Number Generator(HWRNG) Module
-
-On Keystone SoCs HWRNG module is a submodule of the Security Accelerator.
-
-- compatible: should be "ti,keystone-rng"
-- ti,syscon-sa-cfg: phandle to syscon node of the SA configuration registers.
-		    This registers are shared between hwrng and crypto drivers.
-- clocks: phandle to the reference clocks for the subsystem
-- clock-names: functional clock name. Should be set to "fck"
-- reg: HWRNG module register space
-
-Example:
-/* K2HK */
-
-rng@24000 {
-	compatible = "ti,keystone-rng";
-	ti,syscon-sa-cfg = <&sa_config>;
-	clocks = <&clksa>;
-	clock-names = "fck";
-	reg = <0x24000 0x1000>;
-};
diff --git a/dts/Bindings/rng/nuvoton,npcm-rng.txt b/dts/Bindings/rng/nuvoton,npcm-rng.txt
deleted file mode 100644
index 65c04172fc..0000000000
--- a/dts/Bindings/rng/nuvoton,npcm-rng.txt
+++ /dev/null
@@ -1,12 +0,0 @@
-NPCM SoC Random Number Generator
-
-Required properties:
-- compatible  : "nuvoton,npcm750-rng" for the NPCM7XX BMC.
-- reg         : Specifies physical base address and size of the registers.
-
-Example:
-
-rng: rng@f000b000 {
-	compatible = "nuvoton,npcm750-rng";
-	reg = <0xf000b000 0x8>;
-};
diff --git a/dts/Bindings/rng/nuvoton,npcm-rng.yaml b/dts/Bindings/rng/nuvoton,npcm-rng.yaml
new file mode 100644
index 0000000000..abd134c9d4
--- /dev/null
+++ b/dts/Bindings/rng/nuvoton,npcm-rng.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rng/nuvoton,npcm-rng.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton NPCM SoC Random Number Generator
+
+maintainers:
+  - Avi Fishman <avifishman70@gmail.com>
+  - Tomer Maimon <tmaimon77@gmail.com>
+  - Tali Perry <tali.perry1@gmail.com>
+  - Patrick Venture <venture@google.com>
+  - Nancy Yuen <yuenn@google.com>
+  - Benjamin Fair <benjaminfair@google.com>
+
+properties:
+  compatible:
+    const: nuvoton,npcm750-rng
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    rng@f000b000 {
+        compatible = "nuvoton,npcm750-rng";
+        reg = <0xf000b000 0x8>;
+    };
diff --git a/dts/Bindings/rng/omap3_rom_rng.txt b/dts/Bindings/rng/omap3_rom_rng.txt
deleted file mode 100644
index f315c9723b..0000000000
--- a/dts/Bindings/rng/omap3_rom_rng.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-OMAP ROM RNG driver binding
-
-Secure SoCs may provide RNG via secure ROM calls like Nokia N900 does. The
-implementation can depend on the SoC secure ROM used.
-
-- compatible:
-	Usage: required
-	Value type: <string>
-	Definition: must be "nokia,n900-rom-rng"
-
-- clocks:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: reference to the the RNG interface clock
-
-- clock-names:
-	Usage: required
-	Value type: <stringlist>
-	Definition: must be "ick"
-
-Example:
-
-	rom_rng: rng {
-		compatible = "nokia,n900-rom-rng";
-		clocks = <&rng_ick>;
-		clock-names = "ick";
-	};
diff --git a/dts/Bindings/rng/st,rng.txt b/dts/Bindings/rng/st,rng.txt
deleted file mode 100644
index 35734bc282..0000000000
--- a/dts/Bindings/rng/st,rng.txt
+++ /dev/null
@@ -1,15 +0,0 @@
-STMicroelectronics HW Random Number Generator
-----------------------------------------------
-
-Required parameters:
-compatible	: Should be "st,rng"
-reg		: Base address and size of IP's register map.
-clocks		: Phandle to device's clock (See: ../clocks/clock-bindings.txt)
-
-Example:
-
-rng@fee80000 {
-	compatible      = "st,rng";
-	reg		= <0xfee80000 0x1000>;
-	clocks          = <&clk_sysin>;
-}
diff --git a/dts/Bindings/rng/st,rng.yaml b/dts/Bindings/rng/st,rng.yaml
new file mode 100644
index 0000000000..ff1211ef90
--- /dev/null
+++ b/dts/Bindings/rng/st,rng.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rng/st,rng.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics Hardware Random Number Generator
+
+maintainers:
+  - Patrice Chotard <patrice.chotard@foss.st.com>
+
+properties:
+  compatible:
+    const: st,rng
+
+  clocks:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    rng@fee80000 {
+        compatible = "st,rng";
+        reg = <0xfee80000 0x1000>;
+        clocks = <&clk_sysin>;
+    };
diff --git a/dts/Bindings/rng/ti,keystone-rng.yaml b/dts/Bindings/rng/ti,keystone-rng.yaml
new file mode 100644
index 0000000000..e749818fc1
--- /dev/null
+++ b/dts/Bindings/rng/ti,keystone-rng.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rng/ti,keystone-rng.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Keystone SoC Hardware Random Number Generator
+
+maintainers:
+  - Nishanth Menon <nm@ti.com>
+  - Santosh Shilimkar <ssantosh@kernel.org>
+
+properties:
+  compatible:
+    const: ti,keystone-rng
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: fck
+
+  reg:
+    maxItems: 1
+
+  ti,syscon-sa-cfg:
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+    description: |
+      Phandle to syscon node of the SA configuration registers.  These
+      registers are shared between HWRNG and crypto drivers.
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - reg
+  - ti,syscon-sa-cfg
+
+additionalProperties: false
+
+examples:
+  - |
+    rng@24000 {
+        compatible = "ti,keystone-rng";
+        ti,syscon-sa-cfg = <&sa_config>;
+        clocks = <&clksa>;
+        clock-names = "fck";
+        reg = <0x24000 0x1000>;
+    };
diff --git a/dts/Bindings/rng/ti,omap-rom-rng.yaml b/dts/Bindings/rng/ti,omap-rom-rng.yaml
new file mode 100644
index 0000000000..9a58440b1a
--- /dev/null
+++ b/dts/Bindings/rng/ti,omap-rom-rng.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rng/ti,omap-rom-rng.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: OMAP ROM Random Number Generator
+
+maintainers:
+  - Pali Rohár <pali@kernel.org>
+  - Tony Lindgren <tony@atomide.com>
+
+description:
+  Secure SoCs may provide RNG via secure ROM calls like Nokia N900 does.
+  The implementation can depend on the SoC secure ROM used.
+
+properties:
+  compatible:
+    const: nokia,n900-rom-rng
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: ick
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    rng {
+        compatible = "nokia,n900-rom-rng";
+        clocks = <&rng_ick>;
+        clock-names = "ick";
+    };
diff --git a/dts/Bindings/rng/timeriomem_rng.txt b/dts/Bindings/rng/timeriomem_rng.txt
deleted file mode 100644
index fb48461600..0000000000
--- a/dts/Bindings/rng/timeriomem_rng.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-HWRNG support for the timeriomem_rng driver
-
-Required properties:
-- compatible : "timeriomem_rng"
-- reg : base address to sample from
-- period : wait time in microseconds to use between samples
-
-Optional properties:
-- quality : estimated number of bits of true entropy per 1024 bits read from the
-            rng.  Defaults to zero which causes the kernel's default quality to
-            be used instead.  Note that the default quality is usually zero
-            which disables using this rng to automatically fill the kernel's
-            entropy pool.
-
-N.B. currently 'reg' must be at least four bytes wide and 32-bit aligned
-
-Example:
-
-hwrng@44 {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	compatible = "timeriomem_rng";
-	reg = <0x44 0x04>;
-	period = <1000000>;
-};
diff --git a/dts/Bindings/rng/timeriomem_rng.yaml b/dts/Bindings/rng/timeriomem_rng.yaml
new file mode 100644
index 0000000000..84bf518a55
--- /dev/null
+++ b/dts/Bindings/rng/timeriomem_rng.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rng/timeriomem_rng.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TimerIO Random Number Generator
+
+maintainers:
+  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+
+properties:
+  compatible:
+    const: timeriomem_rng
+
+  period:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: wait time in microseconds to use between samples
+
+  quality:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0
+    description:
+      Estimated number of bits of true entropy per 1024 bits read from the rng.
+      Defaults to zero which causes the kernel's default quality to be used
+      instead.  Note that the default quality is usually zero which disables
+      using this rng to automatically fill the kernel's entropy pool.
+
+  reg:
+    maxItems: 1
+    description:
+      Base address to sample from. Currently 'reg' must be at least four bytes
+      wide and 32-bit aligned.
+
+required:
+  - compatible
+  - period
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    rng@44 {
+        compatible = "timeriomem_rng";
+        reg = <0x44 0x04>;
+        period = <1000000>;
+    };
diff --git a/dts/Bindings/rtc/brcm,brcmstb-waketimer.txt b/dts/Bindings/rtc/brcm,brcmstb-waketimer.txt
deleted file mode 100644
index d946f28502..0000000000
--- a/dts/Bindings/rtc/brcm,brcmstb-waketimer.txt
+++ /dev/null
@@ -1,20 +0,0 @@
-Broadcom STB wake-up Timer
-
-The Broadcom STB wake-up timer provides a 27Mhz resolution timer, with the
-ability to wake up the system from low-power suspend/standby modes.
-
-Required properties:
-- compatible     : should contain "brcm,brcmstb-waketimer"
-- reg            : the register start and length for the WKTMR block
-- interrupts     : The TIMER interrupt
-- clocks	 : The phandle to the UPG fixed clock (27Mhz domain)
-
-Example:
-
-waketimer@f0411580 {
-	compatible = "brcm,brcmstb-waketimer";
-	reg = <0xf0411580 0x14>;
-	interrupts = <0x3>;
-	interrupt-parent = <&aon_pm_l2_intc>;
-	clocks = <&upg_fixed>;
-};
diff --git a/dts/Bindings/rtc/brcm,brcmstb-waketimer.yaml b/dts/Bindings/rtc/brcm,brcmstb-waketimer.yaml
new file mode 100644
index 0000000000..9fe079917a
--- /dev/null
+++ b/dts/Bindings/rtc/brcm,brcmstb-waketimer.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/brcm,brcmstb-waketimer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom STB wake-up Timer
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+description:
+  The Broadcom STB wake-up timer provides a 27Mhz resolution timer, with the
+  ability to wake up the system from low-power suspend/standby modes.
+
+allOf:
+  - $ref: "rtc.yaml#"
+
+properties:
+  compatible:
+    const: brcm,brcmstb-waketimer
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: the TIMER interrupt
+    maxItems: 1
+
+  clocks:
+    description: clock reference in the 27MHz domain
+    maxItems: 1
+
+additionalProperties: false
+
+examples:
+  - |
+    rtc@f0411580 {
+        compatible = "brcm,brcmstb-waketimer";
+        reg = <0xf0411580 0x14>;
+        interrupts = <0x3>;
+        interrupt-parent = <&aon_pm_l2_intc>;
+        clocks = <&upg_fixed>;
+    };
diff --git a/dts/Bindings/rtc/epson,rx8900.yaml b/dts/Bindings/rtc/epson,rx8900.yaml
index 29fe39bb08..d12855e7ff 100644
--- a/dts/Bindings/rtc/epson,rx8900.yaml
+++ b/dts/Bindings/rtc/epson,rx8900.yaml
@@ -15,6 +15,7 @@ allOf:
 properties:
   compatible:
     enum:
+      - epson,rx8804
       - epson,rx8900
       - microcrystal,rv8803
 
diff --git a/dts/Bindings/rtc/nvidia,tegra20-rtc.txt b/dts/Bindings/rtc/nvidia,tegra20-rtc.txt
deleted file mode 100644
index b7d98ed3e0..0000000000
--- a/dts/Bindings/rtc/nvidia,tegra20-rtc.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-NVIDIA Tegra20 real-time clock
-
-The Tegra RTC maintains seconds and milliseconds counters, and five alarm
-registers. The alarms and other interrupts may wake the system from low-power
-state.
-
-Required properties:
-
-- compatible : For Tegra20, must contain "nvidia,tegra20-rtc".  Otherwise,
-  must contain '"nvidia,<chip>-rtc", "nvidia,tegra20-rtc"', where <chip>
-  can be tegra30, tegra114, tegra124, or tegra132.
-- reg : Specifies base physical address and size of the registers.
-- interrupts : A single interrupt specifier.
-- clocks : Must contain one entry, for the module clock.
-  See ../clocks/clock-bindings.txt for details.
-
-Example:
-
-timer {
-	compatible = "nvidia,tegra20-rtc";
-	reg = <0x7000e000 0x100>;
-	interrupts = <0 2 0x04>;
-	clocks = <&tegra_car 4>;
-};
diff --git a/dts/Bindings/rtc/nvidia,tegra20-rtc.yaml b/dts/Bindings/rtc/nvidia,tegra20-rtc.yaml
new file mode 100644
index 0000000000..17d6280e55
--- /dev/null
+++ b/dts/Bindings/rtc/nvidia,tegra20-rtc.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/nvidia,tegra20-rtc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra real-time clock
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+description: |
+  The Tegra RTC maintains seconds and milliseconds counters, and five
+  alarm registers. The alarms and other interrupts may wake the system
+  from low-power state.
+
+properties:
+  compatible:
+    oneOf:
+      - const: nvidia,tegra20-rtc
+      - items:
+          - enum:
+              - nvidia,tegra30-rtc
+              - nvidia,tegra114-rtc
+              - nvidia,tegra124-rtc
+              - nvidia,tegra210-rtc
+              - nvidia,tegra186-rtc
+              - nvidia,tegra194-rtc
+              - nvidia,tegra234-rtc
+          - const: nvidia,tegra20-rtc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: rtc
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+examples:
+  - |
+    timer@7000e000 {
+        compatible = "nvidia,tegra20-rtc";
+        reg = <0x7000e000 0x100>;
+        interrupts = <0 2 0x04>;
+        clocks = <&tegra_car 4>;
+    };
diff --git a/dts/Bindings/rtc/qcom-pm8xxx-rtc.yaml b/dts/Bindings/rtc/qcom-pm8xxx-rtc.yaml
index 4fba6dba16..6fa7d9fc2d 100644
--- a/dts/Bindings/rtc/qcom-pm8xxx-rtc.yaml
+++ b/dts/Bindings/rtc/qcom-pm8xxx-rtc.yaml
@@ -19,7 +19,14 @@ properties:
       - qcom,pmk8350-rtc
 
   reg:
-    maxItems: 1
+    minItems: 1
+    maxItems: 2
+
+  reg-names:
+    minItems: 1
+    items:
+      - const: rtc
+      - const: alarm
 
   interrupts:
     maxItems: 1
diff --git a/dts/Bindings/rtc/st,stm32-rtc.yaml b/dts/Bindings/rtc/st,stm32-rtc.yaml
index 2359f541b7..764717ce18 100644
--- a/dts/Bindings/rtc/st,stm32-rtc.yaml
+++ b/dts/Bindings/rtc/st,stm32-rtc.yaml
@@ -127,6 +127,7 @@ examples:
       st,syscfg = <&pwrcfg 0x00 0x100>;
     };
 
+  - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/clock/stm32mp1-clks.h>
     rtc@5c004000 {
diff --git a/dts/Bindings/rtc/sunplus,sp7021-rtc.yaml b/dts/Bindings/rtc/sunplus,sp7021-rtc.yaml
new file mode 100644
index 0000000000..fd1b3e71ff
--- /dev/null
+++ b/dts/Bindings/rtc/sunplus,sp7021-rtc.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) Sunplus Co., Ltd. 2021
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/sunplus,sp7021-rtc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sunplus SP7021 Real Time Clock controller
+
+maintainers:
+  - Vincent Shih <vincent.sunplus@gmail.com>
+
+properties:
+  compatible:
+    const: sunplus,sp7021-rtc
+
+  reg:
+    maxItems: 1
+
+  reg-names:
+    items:
+      - const: rtc
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - resets
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    rtc: serial@9c003a00 {
+        compatible = "sunplus,sp7021-rtc";
+        reg = <0x9c003a00 0x80>;
+        reg-names = "rtc";
+        clocks = <&clkc 0x12>;
+        resets = <&rstc 0x02>;
+        interrupt-parent = <&intc>;
+        interrupts = <163 IRQ_TYPE_EDGE_RISING>;
+    };
+...
diff --git a/dts/Bindings/serial/8250.yaml b/dts/Bindings/serial/8250.yaml
index fa767440f2..3bab2f27b9 100644
--- a/dts/Bindings/serial/8250.yaml
+++ b/dts/Bindings/serial/8250.yaml
@@ -113,9 +113,10 @@ properties:
               - nvidia,tegra30-uart
               - nvidia,tegra114-uart
               - nvidia,tegra124-uart
+              - nvidia,tegra210-uart
               - nvidia,tegra186-uart
               - nvidia,tegra194-uart
-              - nvidia,tegra210-uart
+              - nvidia,tegra234-uart
           - const: nvidia,tegra20-uart
 
   reg:
diff --git a/dts/Bindings/serial/amlogic,meson-uart.yaml b/dts/Bindings/serial/amlogic,meson-uart.yaml
index 7487aa6ef8..72e8868db3 100644
--- a/dts/Bindings/serial/amlogic,meson-uart.yaml
+++ b/dts/Bindings/serial/amlogic,meson-uart.yaml
@@ -29,6 +29,7 @@ properties:
               - amlogic,meson8-uart
               - amlogic,meson8b-uart
               - amlogic,meson-gx-uart
+              - amlogic,meson-s4-uart
           - const: amlogic,meson-ao-uart
       - description: Everything-Else power domain UART controller
         enum:
@@ -36,6 +37,7 @@ properties:
           - amlogic,meson8-uart
           - amlogic,meson8b-uart
           - amlogic,meson-gx-uart
+          - amlogic,meson-s4-uart
 
   reg:
     maxItems: 1
diff --git a/dts/Bindings/serial/fsl-lpuart.yaml b/dts/Bindings/serial/fsl-lpuart.yaml
index a90c971b4f..6e04e38482 100644
--- a/dts/Bindings/serial/fsl-lpuart.yaml
+++ b/dts/Bindings/serial/fsl-lpuart.yaml
@@ -21,9 +21,15 @@ properties:
           - fsl,ls1028a-lpuart
           - fsl,imx7ulp-lpuart
           - fsl,imx8qm-lpuart
+          - fsl,imxrt1050-lpuart
       - items:
-          - const: fsl,imx8qxp-lpuart
+          - enum:
+              - fsl,imx8qxp-lpuart
+              - fsl,imx8ulp-lpuart
           - const: fsl,imx7ulp-lpuart
+      - items:
+          - const: fsl,imx8qm-lpuart
+          - const: fsl,imx8qxp-lpuart
 
   reg:
     maxItems: 1
diff --git a/dts/Bindings/serial/nvidia,tegra194-tcu.txt b/dts/Bindings/serial/nvidia,tegra194-tcu.txt
deleted file mode 100644
index 085a8591ac..0000000000
--- a/dts/Bindings/serial/nvidia,tegra194-tcu.txt
+++ /dev/null
@@ -1,35 +0,0 @@
-NVIDIA Tegra Combined UART (TCU)
-
-The TCU is a system for sharing a hardware UART instance among multiple
-systems within the Tegra SoC. It is implemented through a mailbox-
-based protocol where each "virtual UART" has a pair of mailboxes, one
-for transmitting and one for receiving, that is used to communicate
-with the hardware implementing the TCU.
-
-Required properties:
-- name : Should be tcu
-- compatible
-    Array of strings
-    One of:
-    - "nvidia,tegra194-tcu"
-- mbox-names:
-    "rx" - Mailbox for receiving data from hardware UART
-    "tx" - Mailbox for transmitting data to hardware UART
-- mboxes: Mailboxes corresponding to the mbox-names.
-
-This node is a mailbox consumer. See the following files for details of
-the mailbox subsystem, and the specifiers implemented by the relevant
-provider(s):
-
-- .../mailbox/mailbox.txt
-- .../mailbox/nvidia,tegra186-hsp.txt
-
-Example bindings:
------------------
-
-tcu: tcu {
-	compatible = "nvidia,tegra194-tcu";
-	mboxes = <&hsp_top0 TEGRA_HSP_MBOX_TYPE_SM 0>,
-	         <&hsp_aon TEGRA_HSP_MBOX_TYPE_SM 1>;
-	mbox-names = "rx", "tx";
-};
diff --git a/dts/Bindings/serial/nvidia,tegra194-tcu.yaml b/dts/Bindings/serial/nvidia,tegra194-tcu.yaml
new file mode 100644
index 0000000000..e2d111b3e0
--- /dev/null
+++ b/dts/Bindings/serial/nvidia,tegra194-tcu.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/nvidia,tegra194-tcu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra Combined UART (TCU)
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jonathan Hunter <jonathanh@nvidia.com>
+
+description:
+  The TCU is a system for sharing a hardware UART instance among multiple
+  systems within the Tegra SoC. It is implemented through a mailbox-
+  based protocol where each "virtual UART" has a pair of mailboxes, one
+  for transmitting and one for receiving, that is used to communicate
+  with the hardware implementing the TCU.
+
+properties:
+  $nodename:
+    pattern: "^serial(@.*)?$"
+
+  compatible:
+    oneOf:
+      - const: nvidia,tegra194-tcu
+      - items:
+          - enum:
+              - nvidia,tegra234-tcu
+          - const: nvidia,tegra194-tcu
+
+  mbox-names:
+    items:
+      - const: rx
+      - const: tx
+
+  mboxes:
+    description: |
+      List of phandles to mailbox channels used for receiving and
+      transmitting data from and to the hardware UART.
+    items:
+      - description: mailbox for receiving data from hardware UART
+      - description: mailbox for transmitting data to hardware UART
+
+required:
+  - compatible
+  - mbox-names
+  - mboxes
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/mailbox/tegra186-hsp.h>
+
+    tcu: serial {
+        compatible = "nvidia,tegra194-tcu";
+        mboxes = <&hsp_top0 TEGRA_HSP_MBOX_TYPE_SM 0>,
+                 <&hsp_aon TEGRA_HSP_MBOX_TYPE_SM 1>;
+        mbox-names = "rx", "tx";
+    };
diff --git a/dts/Bindings/serial/pl011.yaml b/dts/Bindings/serial/pl011.yaml
index 5ea00f8a28..d8aed84abc 100644
--- a/dts/Bindings/serial/pl011.yaml
+++ b/dts/Bindings/serial/pl011.yaml
@@ -91,6 +91,9 @@ properties:
       3000ms.
     default: 3000
 
+  resets:
+    maxItems: 1
+
 required:
   - compatible
   - reg
diff --git a/dts/Bindings/serial/renesas,sci.yaml b/dts/Bindings/serial/renesas,sci.yaml
index 22ed2f0b1d..8dda4e10e0 100644
--- a/dts/Bindings/serial/renesas,sci.yaml
+++ b/dts/Bindings/serial/renesas,sci.yaml
@@ -14,7 +14,15 @@ allOf:
 
 properties:
   compatible:
-    const: renesas,sci
+    oneOf:
+      - items:
+          - enum:
+              - renesas,r9a07g044-sci     # RZ/G2{L,LC}
+              - renesas,r9a07g054-sci     # RZ/V2L
+          - const: renesas,sci            # generic SCI compatible UART
+
+      - items:
+          - const: renesas,sci            # generic SCI compatible UART
 
   reg:
     maxItems: 1
@@ -54,18 +62,46 @@ required:
   - clocks
   - clock-names
 
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - renesas,r9a07g044-sci
+          - renesas,r9a07g054-sci
+then:
+  properties:
+    resets:
+      maxItems: 1
+
+    power-domains:
+      maxItems: 1
+
+  required:
+    - resets
+    - power-domains
+
 unevaluatedProperties: false
 
 examples:
   - |
+    #include <dt-bindings/clock/r9a07g044-cpg.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
     aliases {
             serial0 = &sci0;
     };
 
-    sci0: serial@ffff78 {
-            compatible = "renesas,sci";
-            reg = <0xffff78 8>;
-            interrupts = <88 0>, <89 0>, <90 0>, <91 0>;
-            clocks = <&fclk>;
+    sci0: serial@1004d000 {
+            compatible = "renesas,r9a07g044-sci", "renesas,sci";
+            reg = <0x1004d000 0x400>;
+            interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "eri", "rxi", "txi", "tei";
+            clocks = <&cpg CPG_MOD R9A07G044_SCI0_CLKP>;
             clock-names = "fck";
+            power-domains = <&cpg>;
+            resets = <&cpg R9A07G044_SCI0_RST>;
     };
diff --git a/dts/Bindings/serial/renesas,scif.yaml b/dts/Bindings/serial/renesas,scif.yaml
index 6b8731f7f2..ba5d3e0acc 100644
--- a/dts/Bindings/serial/renesas,scif.yaml
+++ b/dts/Bindings/serial/renesas,scif.yaml
@@ -66,7 +66,19 @@ properties:
 
       - items:
           - enum:
+              - renesas,scif-r8a779f0     # R-Car S4-8
+          - const: renesas,rcar-gen4-scif # R-Car Gen4
+          - const: renesas,scif           # generic SCIF compatible UART
+
+      - items:
+          - enum:
               - renesas,scif-r9a07g044      # RZ/G2{L,LC}
+              - renesas,scif-r9a07g054      # RZ/V2L
+
+      - items:
+          - enum:
+              - renesas,scif-r9a07g054      # RZ/V2L
+          - const: renesas,scif-r9a07g044   # RZ/G2{L,LC} fallback for RZ/V2L
 
   reg:
     maxItems: 1
@@ -153,6 +165,9 @@ if:
         enum:
           - renesas,rcar-gen2-scif
           - renesas,rcar-gen3-scif
+          - renesas,rcar-gen4-scif
+          - renesas,scif-r9a07g044
+          - renesas,scif-r9a07g054
 then:
   required:
     - resets
diff --git a/dts/Bindings/serial/snps-dw-apb-uart.yaml b/dts/Bindings/serial/snps-dw-apb-uart.yaml
index b49fda5e60..12137fe80a 100644
--- a/dts/Bindings/serial/snps-dw-apb-uart.yaml
+++ b/dts/Bindings/serial/snps-dw-apb-uart.yaml
@@ -40,6 +40,11 @@ properties:
               - brcm,bcm11351-dw-apb-uart
               - brcm,bcm21664-dw-apb-uart
           - const: snps,dw-apb-uart
+      - items:
+          - enum:
+              - starfive,jh7100-hsuart
+              - starfive,jh7100-uart
+          - const: snps,dw-apb-uart
       - const: snps,dw-apb-uart
 
   reg:
diff --git a/dts/Bindings/soc/bcm/brcm,bcm2835-vchiq.txt b/dts/Bindings/soc/bcm/brcm,bcm2835-vchiq.txt
deleted file mode 100644
index f331316183..0000000000
--- a/dts/Bindings/soc/bcm/brcm,bcm2835-vchiq.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-Broadcom VCHIQ firmware services
-
-Required properties:
-
-- compatible:	Should be "brcm,bcm2835-vchiq" on BCM2835, otherwise
-		"brcm,bcm2836-vchiq".
-- reg:		Physical base address and length of the doorbell register pair
-- interrupts:	The interrupt number
-		  See bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt
-
-Example:
-
-mailbox@7e00b840 {
-	compatible = "brcm,bcm2835-vchiq";
-	reg = <0x7e00b840 0xf>;
-	interrupts = <0 2>;
-};
diff --git a/dts/Bindings/soc/bcm/brcm,bcm2835-vchiq.yaml b/dts/Bindings/soc/bcm/brcm,bcm2835-vchiq.yaml
new file mode 100644
index 0000000000..e04439b335
--- /dev/null
+++ b/dts/Bindings/soc/bcm/brcm,bcm2835-vchiq.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/bcm/brcm,bcm2835-vchiq.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom VCHIQ firmware services
+
+maintainers:
+  - Nicolas Saenz Julienne <nsaenz@kernel.org>
+
+description:
+  The VCHIQ communication channel can be provided by BCM283x and Capri SoCs,
+  to communicate with the VPU-side OS services.
+
+properties:
+  compatible:
+    oneOf:
+      - description: BCM2835 based boards
+        items:
+          - enum:
+              - brcm,bcm2835-vchiq
+
+      - description: BCM2836/BCM2837 based boards
+        items:
+          - enum:
+              - brcm,bcm2836-vchiq
+          - const: brcm,bcm2835-vchiq
+
+  reg:
+    description: Physical base address and length of the doorbell register pair
+    minItems: 1
+
+  interrupts:
+    description: Interrupt number of the doorbell interrupt
+    minItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    mailbox@7e00b840 {
+      compatible = "brcm,bcm2835-vchiq";
+      reg = <0x7e00b840 0xf>;
+      interrupts = <0 2>;
+    };
+
+...
diff --git a/dts/Bindings/soc/imx/fsl,imx8mn-disp-blk-ctrl.yaml b/dts/Bindings/soc/imx/fsl,imx8mn-disp-blk-ctrl.yaml
new file mode 100644
index 0000000000..fbeaac399c
--- /dev/null
+++ b/dts/Bindings/soc/imx/fsl,imx8mn-disp-blk-ctrl.yaml
@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/imx/fsl,imx8mn-disp-blk-ctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX8MN DISP blk-ctrl
+
+maintainers:
+  - Lucas Stach <l.stach@pengutronix.de>
+
+description:
+  The i.MX8MN DISP blk-ctrl is a top-level peripheral providing access to
+  the NoC and ensuring proper power sequencing of the display and MIPI CSI
+  peripherals located in the DISP domain of the SoC.
+
+properties:
+  compatible:
+    items:
+      - const: fsl,imx8mn-disp-blk-ctrl
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  power-domains:
+    minItems: 5
+    maxItems: 5
+
+  power-domain-names:
+    items:
+      - const: bus
+      - const: isi
+      - const: lcdif
+      - const: mipi-dsi
+      - const: mipi-csi
+
+  clocks:
+    minItems: 11
+    maxItems: 11
+
+  clock-names:
+    items:
+      - const: disp_axi
+      - const: disp_apb
+      - const: disp_axi_root
+      - const: disp_apb_root
+      - const: lcdif-axi
+      - const: lcdif-apb
+      - const: lcdif-pix
+      - const: dsi-pclk
+      - const: dsi-ref
+      - const: csi-aclk
+      - const: csi-pclk
+
+required:
+  - compatible
+  - reg
+  - power-domains
+  - power-domain-names
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8mn-clock.h>
+    #include <dt-bindings/power/imx8mn-power.h>
+
+    disp_blk_ctl: blk_ctrl@32e28000 {
+      compatible = "fsl,imx8mn-disp-blk-ctrl", "syscon";
+      reg = <0x32e28000 0x100>;
+      power-domains = <&pgc_dispmix>, <&pgc_dispmix>,
+                      <&pgc_dispmix>, <&pgc_mipi>,
+                      <&pgc_mipi>;
+      power-domain-names = "bus", "isi", "lcdif", "mipi-dsi",
+                           "mipi-csi";
+      clocks = <&clk IMX8MN_CLK_DISP_AXI>,
+               <&clk IMX8MN_CLK_DISP_APB>,
+               <&clk IMX8MN_CLK_DISP_AXI_ROOT>,
+               <&clk IMX8MN_CLK_DISP_APB_ROOT>,
+               <&clk IMX8MN_CLK_DISP_AXI_ROOT>,
+               <&clk IMX8MN_CLK_DISP_APB_ROOT>,
+               <&clk IMX8MN_CLK_DISP_PIXEL_ROOT>,
+               <&clk IMX8MN_CLK_DSI_CORE>,
+               <&clk IMX8MN_CLK_DSI_PHY_REF>,
+               <&clk IMX8MN_CLK_CSI1_PHY_REF>,
+               <&clk IMX8MN_CLK_CAMERA_PIXEL_ROOT>;
+       clock-names = "disp_axi", "disp_apb", "disp_axi_root", "disp_apb_root",
+                     "lcdif-axi", "lcdif-apb", "lcdif-pix", "dsi-pclk",
+                     "dsi-ref", "csi-aclk", "csi-pclk";
+       #power-domain-cells = <1>;
+    };
diff --git a/dts/Bindings/soc/qcom/qcom-stats.yaml b/dts/Bindings/soc/qcom/qcom-stats.yaml
index 99dff7d73b..473adca4e9 100644
--- a/dts/Bindings/soc/qcom/qcom-stats.yaml
+++ b/dts/Bindings/soc/qcom/qcom-stats.yaml
@@ -21,6 +21,11 @@ properties:
     enum:
       - qcom,rpmh-stats
       - qcom,rpm-stats
+      # For older RPM firmware versions with fixed offset for the sleep stats
+      - qcom,apq8084-rpm-stats
+      - qcom,msm8226-rpm-stats
+      - qcom,msm8916-rpm-stats
+      - qcom,msm8974-rpm-stats
 
   reg:
     maxItems: 1
diff --git a/dts/Bindings/arm/samsung/exynos-chipid.yaml b/dts/Bindings/soc/samsung/exynos-chipid.yaml
index bfc352a2fd..4bb8efb83a 100644
--- a/dts/Bindings/arm/samsung/exynos-chipid.yaml
+++ b/dts/Bindings/soc/samsung/exynos-chipid.yaml
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/arm/samsung/exynos-chipid.yaml#
+$id: http://devicetree.org/schemas/soc/samsung/exynos-chipid.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Samsung Exynos SoC series Chipid driver
diff --git a/dts/Bindings/arm/samsung/pmu.yaml b/dts/Bindings/soc/samsung/exynos-pmu.yaml
index 17678d9686..c30a643703 100644
--- a/dts/Bindings/arm/samsung/pmu.yaml
+++ b/dts/Bindings/soc/samsung/exynos-pmu.yaml
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/arm/samsung/pmu.yaml#
+$id: http://devicetree.org/schemas/soc/samsung/exynos-pmu.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Samsung Exynos SoC series Power Management Unit (PMU)
@@ -24,6 +24,7 @@ select:
           - samsung,exynos5420-pmu
           - samsung,exynos5433-pmu
           - samsung,exynos7-pmu
+          - samsung,exynos850-pmu
           - samsung-s5pv210-pmu
   required:
     - compatible
@@ -41,6 +42,7 @@ properties:
           - samsung,exynos5420-pmu
           - samsung,exynos5433-pmu
           - samsung,exynos7-pmu
+          - samsung,exynos850-pmu
           - samsung-s5pv210-pmu
       - const: syscon
 
diff --git a/dts/Bindings/soc/samsung/exynos-usi.yaml b/dts/Bindings/soc/samsung/exynos-usi.yaml
new file mode 100644
index 0000000000..273f2d95a0
--- /dev/null
+++ b/dts/Bindings/soc/samsung/exynos-usi.yaml
@@ -0,0 +1,159 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/samsung/exynos-usi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung's Exynos USI (Universal Serial Interface) binding
+
+maintainers:
+  - Sam Protsenko <semen.protsenko@linaro.org>
+  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+
+description: |
+  USI IP-core provides selectable serial protocol (UART, SPI or High-Speed I2C).
+  USI shares almost all internal circuits within each protocol, so only one
+  protocol can be chosen at a time. USI is modeled as a node with zero or more
+  child nodes, each representing a serial sub-node device. The mode setting
+  selects which particular function will be used.
+
+  Refer to next bindings documentation for information on protocol subnodes that
+  can exist under USI node:
+
+  [1] Documentation/devicetree/bindings/serial/samsung_uart.yaml
+  [2] Documentation/devicetree/bindings/i2c/i2c-exynos5.txt
+  [3] Documentation/devicetree/bindings/spi/spi-samsung.txt
+
+properties:
+  $nodename:
+    pattern: "^usi@[0-9a-f]+$"
+
+  compatible:
+    enum:
+      - samsung,exynos850-usi   # for USIv2 (Exynos850, ExynosAutoV9)
+
+  reg: true
+
+  clocks: true
+
+  clock-names: true
+
+  ranges: true
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  samsung,sysreg:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description:
+      Should be phandle/offset pair. The phandle to System Register syscon node
+      (for the same domain where this USI controller resides) and the offset
+      of SW_CONF register for this USI controller.
+
+  samsung,mode:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Selects USI function (which serial protocol to use). Refer to
+      <include/dt-bindings/soc/samsung,exynos-usi.h> for valid USI mode values.
+
+  samsung,clkreq-on:
+    type: boolean
+    description:
+      Enable this property if underlying protocol requires the clock to be
+      continuously provided without automatic gating. As suggested by SoC
+      manual, it should be set in case of SPI/I2C slave, UART Rx and I2C
+      multi-master mode. Usually this property is needed if USI mode is set
+      to "UART".
+
+      This property is optional.
+
+patternProperties:
+  # All other properties should be child nodes
+  "^(serial|spi|i2c)@[0-9a-f]+$":
+    type: object
+    description: Child node describing underlying USI serial protocol
+
+required:
+  - compatible
+  - ranges
+  - "#address-cells"
+  - "#size-cells"
+  - samsung,sysreg
+  - samsung,mode
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - samsung,exynos850-usi
+
+then:
+  properties:
+    reg:
+      maxItems: 1
+
+    clocks:
+      items:
+        - description: Bus (APB) clock
+        - description: Operating clock for UART/SPI/I2C protocol
+
+    clock-names:
+      items:
+        - const: pclk
+        - const: ipclk
+
+  required:
+    - reg
+    - clocks
+    - clock-names
+
+else:
+  properties:
+    reg: false
+    clocks: false
+    clock-names: false
+    samsung,clkreq-on: false
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/soc/samsung,exynos-usi.h>
+
+    usi0: usi@138200c0 {
+        compatible = "samsung,exynos850-usi";
+        reg = <0x138200c0 0x20>;
+        samsung,sysreg = <&sysreg_peri 0x1010>;
+        samsung,mode = <USI_V2_UART>;
+        samsung,clkreq-on; /* needed for UART mode */
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+        clocks = <&cmu_peri 32>, <&cmu_peri 31>;
+        clock-names = "pclk", "ipclk";
+
+        serial_0: serial@13820000 {
+            compatible = "samsung,exynos850-uart";
+            reg = <0x13820000 0xc0>;
+            interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&cmu_peri 32>, <&cmu_peri 31>;
+            clock-names = "uart", "clk_uart_baud0";
+            status = "disabled";
+        };
+
+        hsi2c_0: i2c@13820000 {
+            compatible = "samsung,exynosautov9-hsi2c";
+            reg = <0x13820000 0xc0>;
+            interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+            clocks = <&cmu_peri 31>, <&cmu_peri 32>;
+            clock-names = "hsi2c", "hsi2c_pclk";
+            status = "disabled";
+        };
+    };
diff --git a/dts/Bindings/sound/ak4375.yaml b/dts/Bindings/sound/ak4375.yaml
new file mode 100644
index 0000000000..f1d5074a02
--- /dev/null
+++ b/dts/Bindings/sound/ak4375.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/ak4375.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AK4375 DAC and headphones amplifier Device Tree Bindings
+
+maintainers:
+  - Vincent Knecht <vincent.knecht@mailoo.org>
+
+properties:
+  compatible:
+    const: asahi-kasei,ak4375
+
+  reg:
+    maxItems: 1
+
+  '#sound-dai-cells':
+    const: 0
+
+  avdd-supply:
+    description: regulator phandle for the AVDD power supply.
+
+  tvdd-supply:
+    description: regulator phandle for the TVDD power supply.
+
+  pdn-gpios:
+    description: optional GPIO to set the PDN pin.
+
+required:
+  - compatible
+  - reg
+  - '#sound-dai-cells'
+  - avdd-supply
+  - tvdd-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      headphones: audio-codec@10 {
+        compatible = "asahi-kasei,ak4375";
+        reg = <0x10>;
+        avdd-supply = <&reg_headphones_avdd>;
+        tvdd-supply = <&pm8916_l6>;
+        pdn-gpios = <&msmgpio 114 GPIO_ACTIVE_HIGH>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&headphones_pdn_default>;
+        #sound-dai-cells = <0>;
+      };
+    };
diff --git a/dts/Bindings/sound/amlogic,aiu.yaml b/dts/Bindings/sound/amlogic,aiu.yaml
index f50558ed91..0705f91199 100644
--- a/dts/Bindings/sound/amlogic,aiu.yaml
+++ b/dts/Bindings/sound/amlogic,aiu.yaml
@@ -9,6 +9,9 @@ title: Amlogic AIU audio output controller
 maintainers:
   - Jerome Brunet <jbrunet@baylibre.com>
 
+allOf:
+  - $ref: name-prefix.yaml#
+
 properties:
   $nodename:
     pattern: "^audio-controller@.*"
@@ -65,6 +68,8 @@ properties:
   resets:
     maxItems: 1
 
+  sound-name-prefix: true
+
 required:
   - "#sound-dai-cells"
   - compatible
diff --git a/dts/Bindings/sound/amlogic,g12a-toacodec.yaml b/dts/Bindings/sound/amlogic,g12a-toacodec.yaml
index 3c3891d172..77469a45bb 100644
--- a/dts/Bindings/sound/amlogic,g12a-toacodec.yaml
+++ b/dts/Bindings/sound/amlogic,g12a-toacodec.yaml
@@ -9,6 +9,9 @@ title: Amlogic G12a Internal DAC Control Glue
 maintainers:
   - Jerome Brunet <jbrunet@baylibre.com>
 
+allOf:
+  - $ref: name-prefix.yaml#
+
 properties:
   $nodename:
     pattern: "^audio-controller@.*"
@@ -31,6 +34,8 @@ properties:
   resets:
     maxItems: 1
 
+  sound-name-prefix: true
+
 required:
   - "#sound-dai-cells"
   - compatible
diff --git a/dts/Bindings/sound/amlogic,t9015.yaml b/dts/Bindings/sound/amlogic,t9015.yaml
index db7b04da0b..580a3d040a 100644
--- a/dts/Bindings/sound/amlogic,t9015.yaml
+++ b/dts/Bindings/sound/amlogic,t9015.yaml
@@ -9,6 +9,9 @@ title: Amlogic T9015 Internal Audio DAC
 maintainers:
   - Jerome Brunet <jbrunet@baylibre.com>
 
+allOf:
+  - $ref: name-prefix.yaml#
+
 properties:
   $nodename:
     pattern: "^audio-controller@.*"
@@ -38,6 +41,8 @@ properties:
     description:
       Analogue power supply.
 
+  sound-name-prefix: true
+
 required:
   - "#sound-dai-cells"
   - compatible
diff --git a/dts/Bindings/sound/audio-graph-port.yaml b/dts/Bindings/sound/audio-graph-port.yaml
index 43e7f86e3b..476dcb49ec 100644
--- a/dts/Bindings/sound/audio-graph-port.yaml
+++ b/dts/Bindings/sound/audio-graph-port.yaml
@@ -42,10 +42,15 @@ patternProperties:
         $ref: /schemas/types.yaml#/definitions/flag
       frame-master:
         description: Indicates dai-link frame master.
-        $ref: /schemas/types.yaml#/definitions/phandle
+        oneOf:
+          - $ref: /schemas/types.yaml#/definitions/flag
+          - $ref: /schemas/types.yaml#/definitions/phandle
       bitclock-master:
         description: Indicates dai-link bit clock master
-        $ref: /schemas/types.yaml#/definitions/phandle
+        oneOf:
+          - $ref: /schemas/types.yaml#/definitions/flag
+          - $ref: /schemas/types.yaml#/definitions/phandle
+
       dai-format:
         description: audio format.
         items:
diff --git a/dts/Bindings/sound/cirrus,cs42l42.yaml b/dts/Bindings/sound/cirrus,cs42l42.yaml
new file mode 100644
index 0000000000..31800f70e9
--- /dev/null
+++ b/dts/Bindings/sound/cirrus,cs42l42.yaml
@@ -0,0 +1,225 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/cirrus,cs42l42.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic CS42L42 audio CODEC
+
+maintainers:
+  - patches@opensource.cirrus.com
+
+description:
+  The CS42L42 is a low-power audio codec designed for portable applications.
+  It provides a high-dynamic range, stereo DAC for audio playback and a mono
+  high-dynamic-range ADC for audio capture. There is an integrated headset
+  detection block.
+
+properties:
+  compatible:
+    enum:
+      - cirrus,cs42l42
+
+  reg:
+    description:
+      The I2C address of the CS42L42.
+    maxItems: 1
+
+  VP-supply:
+    description:
+      VP power supply.
+
+  VCP-supply:
+    description:
+      Charge pump power supply.
+
+  VD_FILT-supply:
+    description:
+      FILT+ power supply.
+
+  VL-supply:
+    description:
+      Logic power supply.
+
+  VA-supply:
+    description:
+      Analog power supply.
+
+  reset-gpios:
+    description:
+      This pin will be asserted and then deasserted to reset the
+      CS42L42 before communication starts.
+    maxItems: 1
+
+  interrupts:
+    description:
+      Interrupt for CS42L42 IRQ line.
+    maxItems: 1
+
+  cirrus,ts-inv:
+    description: |
+      Sets the behaviour of the jack plug detect switch.
+
+      0 - (Default) Shorted to tip when unplugged, open when plugged.
+      This is "inverted tip sense (ITS)" in the datasheet.
+
+      1 - Open when unplugged, shorted to tip when plugged.
+      This is "normal tip sense (TS)" in the datasheet.
+
+      The CS42L42_TS_INV_* defines are available for this.
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 1
+
+  cirrus,ts-dbnc-rise:
+    description: |
+      Debounce the rising edge of TIP_SENSE_PLUG. With no
+      debounce, the tip sense pin might be noisy on a plug event.
+
+      0 - 0ms
+      1 - 125ms
+      2 - 250ms
+      3 - 500ms
+      4 - 750ms
+      5 - 1s (Default)
+      6 - 1.25s
+      7 - 1.5s
+
+      The CS42L42_TS_DBNCE_* defines are available for this.
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 7
+
+  cirrus,ts-dbnc-fall:
+    description: |
+      Debounce the falling edge of TIP_SENSE_UNPLUG. With no
+      debounce, the tip sense pin might be noisy on an unplug event.
+
+      0 - 0ms
+      1 - 125ms
+      2 - 250ms
+      3 - 500ms
+      4 - 750ms
+      5 - 1s (Default)
+      6 - 1.25s
+      7 - 1.5s
+
+      The CS42L42_TS_DBNCE_* defines are available for this.
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 7
+
+  cirrus,btn-det-init-dbnce:
+    description: |
+      This sets how long to wait after enabling button detection
+      interrupts before servicing button interrupts, to allow the
+      HS bias time to settle. Value is in milliseconds.
+      There may be erroneous button interrupts if this debounce time
+      is too short.
+
+      0ms - 200ms,
+      Default = 100ms
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 200
+
+  cirrus,btn-det-event-dbnce:
+    description: |
+      This sets how long to wait after receiving a button press
+      interrupt before processing it. Allows time for the button
+      press to make a clean connection with the bias resistors.
+      Value is in milliseconds.
+
+      0ms - 20ms,
+      Default = 10ms
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 20
+
+  cirrus,bias-lvls:
+    description: |
+      For a level-detect headset button scheme, each button will bias
+      the mic pin to a certain voltage. To determine which button was
+      pressed, the voltage is compared to sequential, decreasing
+      voltages, until the compared voltage < bias voltage.
+      For different hardware setups, a designer might want to tweak this.
+      This is an array of descending values for the comparator voltage,
+      given as percent of the HSBIAS voltage.
+
+      Array of 4 values, each 0-63
+      < x1 x2 x3 x4 >
+      Default = < 15 8 4 1 >
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 4
+    maxItems: 4
+    items:
+      minimum: 0
+      maximum: 63
+
+  cirrus,hs-bias-ramp-rate:
+    description: |
+      If present this sets the rate that the HS bias should rise and fall.
+      The actual rise and fall times depend on external hardware (the
+      datasheet gives several rise and fall time examples).
+
+      0 - Fast rise time; slow, load-dependent fall time
+      1 - Fast
+      2 - Slow (default)
+      3 - Slowest
+
+      The CS42L42_HSBIAS_RAMP_* defines are available for this.
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 3
+
+  cirrus,hs-bias-sense-disable:
+    description: |
+      If present the HSBIAS sense is disabled. Configures HSBIAS output
+      current sense through the external 2.21-k resistor. HSBIAS_SENSE
+      is a hardware feature to reduce the potential pop noise when the
+      headset plug is removed slowly. But on some platforms ESD voltage
+      will affect it causing plug detection to fail, especially with CTIA
+      headset type. For different hardware setups, a designer might want
+      to tweak default behavior.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+  - VP-supply
+  - VCP-supply
+  - VD_FILT-supply
+  - VL-supply
+  - VA-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/sound/cs42l42.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      cs42l42: cs42l42@48 {
+          compatible = "cirrus,cs42l42";
+          reg = <0x48>;
+          VA-supply = <&dummy_vreg>;
+          VP-supply = <&dummy_vreg>;
+          VCP-supply = <&dummy_vreg>;
+          VD_FILT-supply = <&dummy_vreg>;
+          VL-supply = <&dummy_vreg>;
+
+          reset-gpios = <&axi_gpio_0 1 0>;
+          interrupt-parent = <&gpio0>;
+          interrupts = <55 8>;
+
+          cirrus,ts-inv = <CS42L42_TS_INV_DIS>;
+          cirrus,ts-dbnc-rise = <CS42L42_TS_DBNCE_1000>;
+          cirrus,ts-dbnc-fall = <CS42L42_TS_DBNCE_0>;
+          cirrus,btn-det-init-dbnce = <100>;
+          cirrus,btn-det-event-dbnce = <10>;
+          cirrus,bias-lvls = <0x0F 0x08 0x04 0x01>;
+          cirrus,hs-bias-ramp-rate = <CS42L42_HSBIAS_RAMP_SLOW>;
+      };
+    };
diff --git a/dts/Bindings/sound/cs42l42.txt b/dts/Bindings/sound/cs42l42.txt
deleted file mode 100644
index 3b77056239..0000000000
--- a/dts/Bindings/sound/cs42l42.txt
+++ /dev/null
@@ -1,115 +0,0 @@
-CS42L42 audio CODEC
-
-Required properties:
-
-  - compatible : "cirrus,cs42l42"
-
-  - reg : the I2C address of the device for I2C.
-
-  - VP-supply, VCP-supply, VD_FILT-supply, VL-supply, VA-supply :
-  power supplies for the device, as covered in
-  Documentation/devicetree/bindings/regulator/regulator.txt.
-
-Optional properties:
-
-  - reset-gpios : a GPIO spec for the reset pin. If specified, it will be
-  deasserted before communication to the codec starts.
-
-  - interrupts : IRQ line info CS42L42.
-  (See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
-  for further information relating to interrupt properties)
-
-  - cirrus,ts-inv : Boolean property. Sets the behaviour of the jack plug
-  detect switch.
-
-  0 = (Default) Shorted to tip when unplugged, open when plugged.
-      This is "inverted tip sense (ITS)" in the datasheet.
-
-  1 = Open when unplugged, shorted to tip when plugged.
-      This is "normal tip sense (TS)" in the datasheet.
-
-  - cirrus,ts-dbnc-rise : Debounce the rising edge of TIP_SENSE_PLUG. With no
-  debounce, the tip sense pin might be noisy on a plug event.
-
-  0 - 0ms,
-  1 - 125ms,
-  2 - 250ms,
-  3 - 500ms,
-  4 - 750ms,
-  5 - (Default) 1s,
-  6 - 1.25s,
-  7 - 1.5s,
-
-  - cirrus,ts-dbnc-fall : Debounce the falling edge of TIP_SENSE_UNPLUG.
-  With no debounce, the tip sense pin might be noisy on an unplug event.
-
-  0 - 0ms,
-  1 - 125ms,
-  2 - 250ms,
-  3 - 500ms,
-  4 - 750ms,
-  5 - (Default) 1s,
-  6 - 1.25s,
-  7 - 1.5s,
-
-  - cirrus,btn-det-init-dbnce : This sets how long the driver sleeps after
-  enabling button detection interrupts. After auto-detection and before
-  servicing button interrupts, the HS bias needs time to settle. If you
-  don't wait, there is possibility for erroneous button interrupt.
-
-  0ms - 200ms,
-  Default = 100ms
-
-  - cirrus,btn-det-event-dbnce : This sets how long the driver delays after
-  receiving a button press interrupt. With level detect interrupts, you want
-  to wait a small amount of time to make sure the button press is making a
-  clean connection with the bias resistors.
-
-  0ms - 20ms,
-  Default = 10ms
-
-  - cirrus,bias-lvls : For a level-detect headset button scheme, each button
-  will bias the mic pin to a certain voltage. To determine which button was
-  pressed, the driver will compare this biased voltage to sequential,
-  decreasing voltages and will stop when a comparator is tripped,
-  indicating a comparator voltage < bias voltage. This value represents a
-  percentage of the internally generated HS bias voltage. For different
-  hardware setups, a designer might want to tweak this. This is an array of
-  descending values for the comparator voltage.
-
-  Array of 4 values
-  Each 0-63
-  < x1 x2 x3 x4 >
-  Default = < 15 8 4 1>
-
-  - cirrus,hs-bias-sense-disable: This is boolean property. If present the
-  HSBIAS sense is disabled. Configures HSBIAS output current sense through
-  the external 2.21-k resistor. HSBIAS_SENSE is hardware feature to reduce
-  the potential pop noise during the headset plug out slowly. But on some
-  platforms ESD voltage will affect it causing test to fail, especially
-  with CTIA headset type. For different hardware setups, a designer might
-  want to tweak default behavior.
-
-Example:
-
-cs42l42: cs42l42@48 {
-	compatible = "cirrus,cs42l42";
-	reg = <0x48>;
-	VA-supply = <&dummy_vreg>;
-	VP-supply = <&dummy_vreg>;
-	VCP-supply = <&dummy_vreg>;
-	VD_FILT-supply = <&dummy_vreg>;
-	VL-supply = <&dummy_vreg>;
-
-	reset-gpios = <&axi_gpio_0 1 0>;
-	interrupt-parent = <&gpio0>;
-	interrupts = <55 8>
-
-	cirrus,ts-inv = <0x00>;
-	cirrus,ts-dbnc-rise = <0x05>;
-	cirrus,ts-dbnc-fall = <0x00>;
-	cirrus,btn-det-init-dbnce = <100>;
-	cirrus,btn-det-event-dbnce = <10>;
-	cirrus,bias-lvls = <0x0F 0x08 0x04 0x01>;
-	cirrus,hs-bias-ramp-rate = <0x02>;
-};
diff --git a/dts/Bindings/sound/linux,spdif-dit.yaml b/dts/Bindings/sound/linux,spdif-dit.yaml
index c6b070e1d0..a4f9257e31 100644
--- a/dts/Bindings/sound/linux,spdif-dit.yaml
+++ b/dts/Bindings/sound/linux,spdif-dit.yaml
@@ -9,6 +9,9 @@ title: Dummy SPDIF Transmitter Device Tree Bindings
 maintainers:
   - Mark Brown <broonie@kernel.org>
 
+allOf:
+  - $ref: name-prefix.yaml#
+
 properties:
   compatible:
     const: linux,spdif-dit
@@ -16,6 +19,8 @@ properties:
   "#sound-dai-cells":
     const: 0
 
+  sound-name-prefix: true
+
 required:
   - "#sound-dai-cells"
   - compatible
diff --git a/dts/Bindings/sound/mt8195-afe-pcm.yaml b/dts/Bindings/sound/mt8195-afe-pcm.yaml
index dcf790b053..6d0975b33d 100644
--- a/dts/Bindings/sound/mt8195-afe-pcm.yaml
+++ b/dts/Bindings/sound/mt8195-afe-pcm.yaml
@@ -19,6 +19,12 @@ properties:
   interrupts:
     maxItems: 1
 
+  memory-region:
+    maxItems: 1
+    description: |
+      Shared memory region for AFE memif.  A "shared-dma-pool".
+      See ../reserved-memory/reserved-memory.txt for details.
+
   mediatek,topckgen:
     $ref: "/schemas/types.yaml#/definitions/phandle"
     description: The phandle of the mediatek topckgen controller
@@ -125,6 +131,7 @@ required:
   - power-domains
   - clocks
   - clock-names
+  - memory-region
 
 additionalProperties: false
 
@@ -139,6 +146,7 @@ examples:
         interrupts = <GIC_SPI 822 IRQ_TYPE_LEVEL_HIGH 0>;
         mediatek,topckgen = <&topckgen>;
         power-domains = <&spm 7>; //MT8195_POWER_DOMAIN_AUDIO
+        memory-region = <&snd_dma_mem_reserved>;
         clocks = <&clk26m>,
                  <&topckgen 163>, //CLK_TOP_APLL1
                  <&topckgen 166>, //CLK_TOP_APLL2
diff --git a/dts/Bindings/sound/mt8195-mt6359-rt1011-rt5682.yaml b/dts/Bindings/sound/mt8195-mt6359-rt1011-rt5682.yaml
index d354c30d33..cf6ad7933e 100644
--- a/dts/Bindings/sound/mt8195-mt6359-rt1011-rt5682.yaml
+++ b/dts/Bindings/sound/mt8195-mt6359-rt1011-rt5682.yaml
@@ -16,6 +16,10 @@ properties:
   compatible:
     const: mediatek,mt8195_mt6359_rt1011_rt5682
 
+  model:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: User specified audio sound card name
+
   mediatek,platform:
     $ref: "/schemas/types.yaml#/definitions/phandle"
     description: The phandle of MT8195 ASoC platform.
diff --git a/dts/Bindings/sound/mt8195-mt6359-rt1019-rt5682.yaml b/dts/Bindings/sound/mt8195-mt6359-rt1019-rt5682.yaml
index 20bc0ffd0e..8f177e02ad 100644
--- a/dts/Bindings/sound/mt8195-mt6359-rt1019-rt5682.yaml
+++ b/dts/Bindings/sound/mt8195-mt6359-rt1019-rt5682.yaml
@@ -16,6 +16,10 @@ properties:
   compatible:
     const: mediatek,mt8195_mt6359_rt1019_rt5682
 
+  model:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: User specified audio sound card name
+
   mediatek,platform:
     $ref: "/schemas/types.yaml#/definitions/phandle"
     description: The phandle of MT8195 ASoC platform.
@@ -28,6 +32,16 @@ properties:
     $ref: "/schemas/types.yaml#/definitions/phandle"
     description: The phandle of MT8195 HDMI codec node.
 
+  mediatek,adsp:
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+    description: The phandle of MT8195 ADSP platform.
+
+  mediatek,dai-link:
+    $ref: /schemas/types.yaml#/definitions/string-array
+    description:
+      A list of the desired dai-links in the sound card. Each entry is a
+      name defined in the machine driver.
+
 additionalProperties: false
 
 required:
diff --git a/dts/Bindings/sound/nvidia,tegra-audio-alc5632.txt b/dts/Bindings/sound/nvidia,tegra-audio-alc5632.txt
deleted file mode 100644
index 57f40f9345..0000000000
--- a/dts/Bindings/sound/nvidia,tegra-audio-alc5632.txt
+++ /dev/null
@@ -1,48 +0,0 @@
-NVIDIA Tegra audio complex
-
-Required properties:
-- compatible : "nvidia,tegra-audio-alc5632"
-- clocks : Must contain an entry for each entry in clock-names.
-  See ../clocks/clock-bindings.txt for details.
-- clock-names : Must include the following entries:
-  - pll_a
-  - pll_a_out0
-  - mclk (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
-- nvidia,model : The user-visible name of this sound complex.
-- nvidia,audio-routing : A list of the connections between audio components.
-  Each entry is a pair of strings, the first being the connection's sink,
-  the second being the connection's source. Valid names for sources and
-  sinks are the ALC5632's pins as documented in the binding for the device
-  and:
-
-  * Headset Stereophone
-  * Int Spk
-  * Headset Mic
-  * Digital Mic
-
-- nvidia,i2s-controller : The phandle of the Tegra I2S controller
-- nvidia,audio-codec : The phandle of the ALC5632 audio codec
-
-Example:
-
-sound {
-	compatible = "nvidia,tegra-audio-alc5632-paz00",
-				 "nvidia,tegra-audio-alc5632";
-
-	nvidia,model = "Compal PAZ00";
-
-	nvidia,audio-routing =
-				"Int Spk", "SPK_OUTP",
-				"Int Spk", "SPK_OUTN",
-				"Headset Mic","MICBIAS1",
-				"MIC1_N", "Headset Mic",
-				"MIC1_P", "Headset Mic",
-				"Headset Stereophone", "HP_OUT_R",
-				"Headset Stereophone", "HP_OUT_L";
-
-	nvidia,i2s-controller = <&tegra_i2s1>;
-	nvidia,audio-codec = <&alc5632>;
-
-	clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 93>;
-	clock-names = "pll_a", "pll_a_out0", "mclk";
-};
diff --git a/dts/Bindings/sound/nvidia,tegra-audio-alc5632.yaml b/dts/Bindings/sound/nvidia,tegra-audio-alc5632.yaml
new file mode 100644
index 0000000000..7ef774910e
--- /dev/null
+++ b/dts/Bindings/sound/nvidia,tegra-audio-alc5632.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra-audio-alc5632.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra audio complex with ALC5632 CODEC
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+allOf:
+  - $ref: nvidia,tegra-audio-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - pattern: '^[a-z0-9]+,tegra-audio-alc5632(-[a-z0-9]+)+$'
+      - const: nvidia,tegra-audio-alc5632
+
+  nvidia,audio-routing:
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+    description: |
+      A list of the connections between audio components.
+      Each entry is a pair of strings, the first being the connection's sink,
+      the second being the connection's source. Valid names for sources and
+      sinks are the pins (documented in the binding document),
+      and the jacks on the board.
+    minItems: 2
+    items:
+      enum:
+        # Board Connectors
+        - "Headset Stereophone"
+        - "Int Spk"
+        - "Headset Mic"
+        - "Digital Mic"
+
+        # CODEC Pins
+        - SPKOUT
+        - SPKOUTN
+        - MICBIAS1
+        - MIC1
+        - HPR
+        - HPL
+        - DMICDAT
+
+required:
+  - nvidia,i2s-controller
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    sound {
+        compatible = "nvidia,tegra-audio-alc5632-paz00",
+                     "nvidia,tegra-audio-alc5632";
+
+        nvidia,model = "Compal PAZ00";
+
+        nvidia,audio-routing = "Int Spk", "SPKOUT",
+                               "Int Spk", "SPKOUTN",
+                               "Headset Mic", "MICBIAS1",
+                               "MIC1", "Headset Mic",
+                               "Headset Stereophone", "HPR",
+                               "Headset Stereophone", "HPL",
+                               "DMICDAT", "Digital Mic";
+
+        nvidia,i2s-controller = <&i2s>;
+        nvidia,audio-codec = <&codec>;
+
+        clocks = <&clk 112>, <&clk 113>, <&clk 93>;
+        clock-names = "pll_a", "pll_a_out0", "mclk";
+    };
diff --git a/dts/Bindings/sound/nvidia,tegra-audio-common.yaml b/dts/Bindings/sound/nvidia,tegra-audio-common.yaml
new file mode 100644
index 0000000000..82801b4f46
--- /dev/null
+++ b/dts/Bindings/sound/nvidia,tegra-audio-common.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/sound/nvidia,tegra-audio-common.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Common properties for NVIDIA Tegra audio complexes
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+properties:
+  clocks:
+    items:
+      - description: PLL A clock
+      - description: PLL A OUT0 clock
+      - description: The Tegra cdev1/extern1 clock, which feeds the card's mclk
+
+  clock-names:
+    items:
+      - const: pll_a
+      - const: pll_a_out0
+      - const: mclk
+
+  nvidia,model:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: The user-visible name of this sound complex.
+
+  nvidia,audio-routing:
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+    description: |
+      A list of the connections between audio components.
+      Each entry is a pair of strings, the first being the connection's sink,
+      the second being the connection's source. Valid names for sources and
+      sinks are the pins (documented in the binding document),
+      and the jacks on the board.
+
+  nvidia,ac97-controller:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: The phandle of the AC97 controller
+
+  nvidia,i2s-controller:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: The phandle of the Tegra I2S controller
+
+  nvidia,audio-codec:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: The phandle of audio codec
+
+  nvidia,spkr-en-gpios:
+    maxItems: 1
+    description: The GPIO that enables the speakers
+
+  nvidia,hp-mute-gpios:
+    maxItems: 1
+    description: The GPIO that mutes the headphones
+
+  nvidia,hp-det-gpios:
+    maxItems: 1
+    description: The GPIO that detect headphones are plugged in
+
+  nvidia,mic-det-gpios:
+    maxItems: 1
+    description: The GPIO that detect microphone is plugged in
+
+  nvidia,ear-sel-gpios:
+    maxItems: 1
+    description: The GPIO that switch between the microphones
+
+  nvidia,int-mic-en-gpios:
+    maxItems: 1
+    description: The GPIO that enables the internal microphone
+
+  nvidia,ext-mic-en-gpios:
+    maxItems: 1
+    description: The GPIO that enables the external microphone
+
+  nvidia,headset:
+    type: boolean
+    description: The Mic Jack represents state of the headset microphone pin
+
+additionalProperties: true
diff --git a/dts/Bindings/sound/nvidia,tegra-audio-graph-card.yaml b/dts/Bindings/sound/nvidia,tegra-audio-graph-card.yaml
index 5bdd30a8a4..b4bee466d6 100644
--- a/dts/Bindings/sound/nvidia,tegra-audio-graph-card.yaml
+++ b/dts/Bindings/sound/nvidia,tegra-audio-graph-card.yaml
@@ -44,6 +44,16 @@ properties:
     minItems: 1
     maxItems: 3
 
+  interconnects:
+    items:
+      - description: APE read memory client
+      - description: APE write memory client
+
+  interconnect-names:
+    items:
+      - const: dma-mem # read
+      - const: write
+
   iommus:
     maxItems: 1
 
diff --git a/dts/Bindings/sound/nvidia,tegra-audio-max98090.txt b/dts/Bindings/sound/nvidia,tegra-audio-max98090.txt
deleted file mode 100644
index c3495beba3..0000000000
--- a/dts/Bindings/sound/nvidia,tegra-audio-max98090.txt
+++ /dev/null
@@ -1,53 +0,0 @@
-NVIDIA Tegra audio complex, with MAX98090 CODEC
-
-Required properties:
-- compatible : "nvidia,tegra-audio-max98090"
-- clocks : Must contain an entry for each entry in clock-names.
-  See ../clocks/clock-bindings.txt for details.
-- clock-names : Must include the following entries:
-  - pll_a
-  - pll_a_out0
-  - mclk (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
-- nvidia,model : The user-visible name of this sound complex.
-- nvidia,audio-routing : A list of the connections between audio components.
-  Each entry is a pair of strings, the first being the connection's sink,
-  the second being the connection's source. Valid names for sources and
-  sinks are the MAX98090's pins (as documented in its binding), and the jacks
-  on the board:
-
-  * Headphones
-  * Speakers
-  * Mic Jack
-  * Int Mic
-
-- nvidia,i2s-controller : The phandle of the Tegra I2S controller that's
-  connected to the CODEC.
-- nvidia,audio-codec : The phandle of the MAX98090 audio codec.
-
-Optional properties:
-- nvidia,hp-det-gpios : The GPIO that detect headphones are plugged in
-- nvidia,mic-det-gpios : The GPIO that detect microphones are plugged in
-
-Example:
-
-sound {
-	compatible = "nvidia,tegra-audio-max98090-venice2",
-		     "nvidia,tegra-audio-max98090";
-	nvidia,model = "NVIDIA Tegra Venice2";
-
-	nvidia,audio-routing =
-		"Headphones", "HPR",
-		"Headphones", "HPL",
-		"Speakers", "SPKR",
-		"Speakers", "SPKL",
-		"Mic Jack", "MICBIAS",
-		"IN34", "Mic Jack";
-
-	nvidia,i2s-controller = <&tegra_i2s1>;
-	nvidia,audio-codec = <&acodec>;
-
-	clocks = <&tegra_car TEGRA124_CLK_PLL_A>,
-		 <&tegra_car TEGRA124_CLK_PLL_A_OUT0>,
-		 <&tegra_car TEGRA124_CLK_EXTERN1>;
-	clock-names = "pll_a", "pll_a_out0", "mclk";
-};
diff --git a/dts/Bindings/sound/nvidia,tegra-audio-max98090.yaml b/dts/Bindings/sound/nvidia,tegra-audio-max98090.yaml
new file mode 100644
index 0000000000..ccc2ee77ca
--- /dev/null
+++ b/dts/Bindings/sound/nvidia,tegra-audio-max98090.yaml
@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra-audio-max98090.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra audio complex with MAX98090 CODEC
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+allOf:
+  - $ref: nvidia,tegra-audio-common.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - pattern: '^[a-z0-9]+,tegra-audio-max98090(-[a-z0-9]+)+$'
+          - const: nvidia,tegra-audio-max98090
+      - items:
+          - enum:
+              - nvidia,tegra-audio-max98090-nyan-big
+              - nvidia,tegra-audio-max98090-nyan-blaze
+          - const: nvidia,tegra-audio-max98090-nyan
+          - const: nvidia,tegra-audio-max98090
+
+  nvidia,audio-routing:
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+    description: |
+      A list of the connections between audio components.
+      Each entry is a pair of strings, the first being the connection's sink,
+      the second being the connection's source. Valid names for sources and
+      sinks are the pins (documented in the binding document),
+      and the jacks on the board.
+    minItems: 2
+    items:
+      enum:
+        # Board Connectors
+        - "Headphones"
+        - "Speakers"
+        - "Mic Jack"
+        - "Int Mic"
+
+        # CODEC Pins
+        - MIC1
+        - MIC2
+        - DMICL
+        - DMICR
+        - IN1
+        - IN2
+        - IN3
+        - IN4
+        - IN5
+        - IN6
+        - IN12
+        - IN34
+        - IN56
+        - HPL
+        - HPR
+        - SPKL
+        - SPKR
+        - RCVL
+        - RCVR
+        - MICBIAS
+
+required:
+  - nvidia,i2s-controller
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra124-car.h>
+
+    sound {
+        compatible = "nvidia,tegra-audio-max98090-venice2",
+                     "nvidia,tegra-audio-max98090";
+        nvidia,model = "NVIDIA Tegra Venice2";
+
+        nvidia,audio-routing =
+                "Headphones", "HPR",
+                "Headphones", "HPL",
+                "Speakers", "SPKR",
+                "Speakers", "SPKL",
+                "Mic Jack", "MICBIAS",
+                "IN34", "Mic Jack";
+
+        nvidia,i2s-controller = <&tegra_i2s1>;
+        nvidia,audio-codec = <&acodec>;
+
+        clocks = <&tegra_car TEGRA124_CLK_PLL_A>,
+                 <&tegra_car TEGRA124_CLK_PLL_A_OUT0>,
+                 <&tegra_car TEGRA124_CLK_EXTERN1>;
+        clock-names = "pll_a", "pll_a_out0", "mclk";
+    };
diff --git a/dts/Bindings/sound/nvidia,tegra-audio-rt5640.txt b/dts/Bindings/sound/nvidia,tegra-audio-rt5640.txt
deleted file mode 100644
index 7788808dcd..0000000000
--- a/dts/Bindings/sound/nvidia,tegra-audio-rt5640.txt
+++ /dev/null
@@ -1,52 +0,0 @@
-NVIDIA Tegra audio complex, with RT5640 CODEC
-
-Required properties:
-- compatible : "nvidia,tegra-audio-rt5640"
-- clocks : Must contain an entry for each entry in clock-names.
-  See ../clocks/clock-bindings.txt for details.
-- clock-names : Must include the following entries:
-  - pll_a
-  - pll_a_out0
-  - mclk (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
-- nvidia,model : The user-visible name of this sound complex.
-- nvidia,audio-routing : A list of the connections between audio components.
-  Each entry is a pair of strings, the first being the connection's sink,
-  the second being the connection's source. Valid names for sources and
-  sinks are the RT5640's pins (as documented in its binding), and the jacks
-  on the board:
-
-  * Headphones
-  * Speakers
-  * Mic Jack
-
-- nvidia,i2s-controller : The phandle of the Tegra I2S controller that's
-  connected to the CODEC.
-- nvidia,audio-codec : The phandle of the RT5640 audio codec. This binding
-  assumes that AIF1 on the CODEC is connected to Tegra.
-
-Optional properties:
-- nvidia,hp-det-gpios : The GPIO that detects headphones are plugged in
-
-Example:
-
-sound {
-	compatible = "nvidia,tegra-audio-rt5640-dalmore",
-			"nvidia,tegra-audio-rt5640";
-	nvidia,model = "NVIDIA Tegra Dalmore";
-
-	nvidia,audio-routing =
-		"Headphones", "HPOR",
-		"Headphones", "HPOL",
-		"Speakers", "SPORP",
-		"Speakers", "SPORN",
-		"Speakers", "SPOLP",
-		"Speakers", "SPOLN";
-
-	nvidia,i2s-controller = <&tegra_i2s1>;
-	nvidia,audio-codec = <&rt5640>;
-
-	nvidia,hp-det-gpios = <&gpio 143 0>; /* GPIO PR7 */
-
-	clocks = <&tegra_car 216>, <&tegra_car 217>, <&tegra_car 120>;
-	clock-names = "pll_a", "pll_a_out0", "mclk";
-};
diff --git a/dts/Bindings/sound/nvidia,tegra-audio-rt5640.yaml b/dts/Bindings/sound/nvidia,tegra-audio-rt5640.yaml
new file mode 100644
index 0000000000..e768fb0e9a
--- /dev/null
+++ b/dts/Bindings/sound/nvidia,tegra-audio-rt5640.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra-audio-rt5640.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra audio complex with RT5639 or RT5640 CODEC
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+allOf:
+  - $ref: nvidia,tegra-audio-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - pattern: '^[a-z0-9]+,tegra-audio-rt56(39|40)(-[a-z0-9]+)+$'
+      - const: nvidia,tegra-audio-rt5640
+
+  nvidia,audio-routing:
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+    description: |
+      A list of the connections between audio components.
+      Each entry is a pair of strings, the first being the connection's sink,
+      the second being the connection's source. Valid names for sources and
+      sinks are the pins (documented in the binding document),
+      and the jacks on the board.
+    minItems: 2
+    items:
+      enum:
+        # Board Connectors
+        - "Headphones"
+        - "Speakers"
+        - "Mic Jack"
+
+        # CODEC Pins
+        - DMIC1
+        - DMIC2
+        - MICBIAS1
+        - IN1P
+        - IN1R
+        - IN2P
+        - IN2R
+        - HPOL
+        - HPOR
+        - LOUTL
+        - LOUTR
+        - MONOP
+        - MONON
+        - SPOLP
+        - SPOLN
+        - SPORP
+        - SPORN
+
+required:
+  - nvidia,i2s-controller
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    sound {
+        compatible = "nvidia,tegra-audio-rt5640-dalmore",
+                     "nvidia,tegra-audio-rt5640";
+        nvidia,model = "NVIDIA Tegra Dalmore";
+
+        nvidia,audio-routing =
+                "Headphones", "HPOR",
+                "Headphones", "HPOL",
+                "Speakers", "SPORP",
+                "Speakers", "SPORN",
+                "Speakers", "SPOLP",
+                "Speakers", "SPOLN";
+
+        nvidia,i2s-controller = <&tegra_i2s1>;
+        nvidia,audio-codec = <&rt5640>;
+
+        nvidia,hp-det-gpios = <&gpio 143 0>;
+
+        clocks = <&clk 216>, <&clk 217>, <&clk 120>;
+        clock-names = "pll_a", "pll_a_out0", "mclk";
+    };
+
diff --git a/dts/Bindings/sound/nvidia,tegra-audio-rt5677.txt b/dts/Bindings/sound/nvidia,tegra-audio-rt5677.txt
deleted file mode 100644
index a4589cda21..0000000000
--- a/dts/Bindings/sound/nvidia,tegra-audio-rt5677.txt
+++ /dev/null
@@ -1,67 +0,0 @@
-NVIDIA Tegra audio complex, with RT5677 CODEC
-
-Required properties:
-- compatible : "nvidia,tegra-audio-rt5677"
-- clocks : Must contain an entry for each entry in clock-names.
-  See ../clocks/clock-bindings.txt for details.
-- clock-names : Must include the following entries:
-  - pll_a
-  - pll_a_out0
-  - mclk (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
-- nvidia,model : The user-visible name of this sound complex.
-- nvidia,audio-routing : A list of the connections between audio components.
-  Each entry is a pair of strings, the first being the connection's sink,
-  the second being the connection's source. Valid names for sources and
-  sinks are the RT5677's pins (as documented in its binding), and the jacks
-  on the board:
-
-  * Headphone
-  * Speaker
-  * Headset Mic
-  * Internal Mic 1
-  * Internal Mic 2
-
-- nvidia,i2s-controller : The phandle of the Tegra I2S controller that's
-  connected to the CODEC.
-- nvidia,audio-codec : The phandle of the RT5677 audio codec. This binding
-  assumes that AIF1 on the CODEC is connected to Tegra.
-
-Optional properties:
-- nvidia,hp-det-gpios : The GPIO that detects headphones are plugged in
-- nvidia,hp-en-gpios : The GPIO that enables headphone amplifier
-- nvidia,mic-present-gpios: The GPIO that mic jack is plugged in
-- nvidia,dmic-clk-en-gpios : The GPIO that gates DMIC clock signal
-
-Example:
-
-sound {
-	compatible = "nvidia,tegra-audio-rt5677-ryu",
-	        "nvidia,tegra-audio-rt5677";
-	nvidia,model = "NVIDIA Tegra Ryu";
-
-	nvidia,audio-routing =
-		"Headphone", "LOUT2",
-		"Headphone", "LOUT1",
-		"Headset Mic", "MICBIAS1",
-		"IN1P", "Headset Mic",
-		"IN1N", "Headset Mic",
-		"DMIC L1", "Internal Mic 1",
-		"DMIC R1", "Internal Mic 1",
-		"DMIC L2", "Internal Mic 2",
-		"DMIC R2", "Internal Mic 2",
-		"Speaker", "PDM1L",
-		"Speaker", "PDM1R";
-
-	nvidia,i2s-controller = <&tegra_i2s1>;
-	nvidia,audio-codec = <&rt5677>;
-
-	nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_HIGH>;
-	nvidia,mic-present-gpios = <&gpio TEGRA_GPIO(O, 5) GPIO_ACTIVE_LOW>;
-	nvidia,hp-en-gpios = <&rt5677 1 GPIO_ACTIVE_HIGH>;
-	nvidia,dmic-clk-en-gpios = <&rt5677 2 GPIO_ACTIVE_HIGH>;
-
-	clocks = <&tegra_car TEGRA124_CLK_PLL_A>,
-	         <&tegra_car TEGRA124_CLK_PLL_A_OUT0>,
-	         <&tegra_car TEGRA124_CLK_EXTERN1>;
-	clock-names = "pll_a", "pll_a_out0", "mclk";
-};
diff --git a/dts/Bindings/sound/nvidia,tegra-audio-rt5677.yaml b/dts/Bindings/sound/nvidia,tegra-audio-rt5677.yaml
new file mode 100644
index 0000000000..a49997d602
--- /dev/null
+++ b/dts/Bindings/sound/nvidia,tegra-audio-rt5677.yaml
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra-audio-rt5677.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra audio complex with RT5677 CODEC
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+allOf:
+  - $ref: nvidia,tegra-audio-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - pattern: '^[a-z0-9]+,tegra-audio-rt5677(-[a-z0-9]+)+$'
+      - const: nvidia,tegra-audio-rt5677
+
+  nvidia,audio-routing:
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+    description: |
+      A list of the connections between audio components.
+      Each entry is a pair of strings, the first being the connection's sink,
+      the second being the connection's source. Valid names for sources and
+      sinks are the pins (documented in the binding document),
+      and the jacks on the board.
+    minItems: 2
+    items:
+      enum:
+        # Board Connectors
+        - "Headphone"
+        - "Speaker"
+        - "Headset Mic"
+        - "Internal Mic 1"
+        - "Internal Mic 2"
+
+        # CODEC Pins
+        - IN1P
+        - IN1N
+        - IN2P
+        - IN2N
+        - MICBIAS1
+        - DMIC1
+        - DMIC2
+        - DMIC3
+        - DMIC4
+        - "DMIC L1"
+        - "DMIC L2"
+        - "DMIC L3"
+        - "DMIC L4"
+        - "DMIC R1"
+        - "DMIC R2"
+        - "DMIC R3"
+        - "DMIC R4"
+        - LOUT1
+        - LOUT2
+        - LOUT3
+        - PDM1L
+        - PDM1R
+        - PDM2L
+        - PDM2R
+
+required:
+  - nvidia,i2s-controller
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    sound {
+        compatible = "nvidia,tegra-audio-rt5677-ryu",
+                     "nvidia,tegra-audio-rt5677";
+        nvidia,model = "NVIDIA Tegra Ryu";
+
+        nvidia,audio-routing =
+                "Headphone", "LOUT2",
+                "Headphone", "LOUT1",
+                "Headset Mic", "MICBIAS1",
+                "IN1P", "Headset Mic",
+                "IN1N", "Headset Mic",
+                "DMIC L1", "Internal Mic 1",
+                "DMIC R1", "Internal Mic 1",
+                "DMIC L2", "Internal Mic 2",
+                "DMIC R2", "Internal Mic 2",
+                "Speaker", "PDM1L",
+                "Speaker", "PDM1R";
+
+        nvidia,i2s-controller = <&tegra_i2s1>;
+        nvidia,audio-codec = <&rt5677>;
+
+        nvidia,hp-det-gpios = <&gpio 143 0>;
+
+        clocks = <&clk 216>,
+                 <&clk 217>,
+                 <&clk 121>;
+        clock-names = "pll_a", "pll_a_out0", "mclk";
+    };
diff --git a/dts/Bindings/sound/nvidia,tegra-audio-sgtl5000.txt b/dts/Bindings/sound/nvidia,tegra-audio-sgtl5000.txt
deleted file mode 100644
index 5da7da4ea0..0000000000
--- a/dts/Bindings/sound/nvidia,tegra-audio-sgtl5000.txt
+++ /dev/null
@@ -1,42 +0,0 @@
-NVIDIA Tegra audio complex, with SGTL5000 CODEC
-
-Required properties:
-- compatible : "nvidia,tegra-audio-sgtl5000"
-- clocks : Must contain an entry for each entry in clock-names.
-  See ../clocks/clock-bindings.txt for details.
-- clock-names : Must include the following entries:
-  - pll_a
-  - pll_a_out0
-  - mclk (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
-- nvidia,model : The user-visible name of this sound complex.
-- nvidia,audio-routing : A list of the connections between audio components.
-  Each entry is a pair of strings, the first being the connection's sink,
-  the second being the connection's source. Valid names for sources and
-  sinks are the SGTL5000's pins (as documented in its binding), and the jacks
-  on the board:
-
-  * Headphone Jack
-  * Line In Jack
-  * Mic Jack
-
-- nvidia,i2s-controller : The phandle of the Tegra I2S controller that's
-  connected to the CODEC.
-- nvidia,audio-codec : The phandle of the SGTL5000 audio codec.
-
-Example:
-
-sound {
-	compatible = "toradex,tegra-audio-sgtl5000-apalis_t30",
-		     "nvidia,tegra-audio-sgtl5000";
-	nvidia,model = "Toradex Apalis T30";
-	nvidia,audio-routing =
-		"Headphone Jack", "HP_OUT",
-		"LINE_IN", "Line In Jack",
-		"MIC_IN", "Mic Jack";
-	nvidia,i2s-controller = <&tegra_i2s2>;
-	nvidia,audio-codec = <&sgtl5000>;
-	clocks = <&tegra_car TEGRA30_CLK_PLL_A>,
-		 <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
-		 <&tegra_car TEGRA30_CLK_EXTERN1>;
-	clock-names = "pll_a", "pll_a_out0", "mclk";
-};
diff --git a/dts/Bindings/sound/nvidia,tegra-audio-sgtl5000.yaml b/dts/Bindings/sound/nvidia,tegra-audio-sgtl5000.yaml
new file mode 100644
index 0000000000..943e7c0174
--- /dev/null
+++ b/dts/Bindings/sound/nvidia,tegra-audio-sgtl5000.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra-audio-sgtl5000.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra audio complex with SGTL5000 CODEC
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+allOf:
+  - $ref: nvidia,tegra-audio-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - pattern: '^[a-z0-9]+,tegra-audio-sgtl5000([-_][a-z0-9]+)+$'
+      - const: nvidia,tegra-audio-sgtl5000
+
+  nvidia,audio-routing:
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+    description: |
+      A list of the connections between audio components.
+      Each entry is a pair of strings, the first being the connection's sink,
+      the second being the connection's source. Valid names for sources and
+      sinks are the pins (documented in the binding document),
+      and the jacks on the board.
+    minItems: 2
+    items:
+      enum:
+        # Board Connectors
+        - "Headphone Jack"
+        - "Line In Jack"
+        - "Mic Jack"
+
+        # CODEC Pins
+        - HP_OUT
+        - LINE_OUT
+        - LINE_IN
+        - MIC_IN
+
+required:
+  - nvidia,i2s-controller
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra30-car.h>
+
+    sound {
+      compatible = "toradex,tegra-audio-sgtl5000-apalis_t30",
+                   "nvidia,tegra-audio-sgtl5000";
+      nvidia,model = "Toradex Apalis T30 SGTL5000";
+      nvidia,audio-routing =
+              "Headphone Jack", "HP_OUT",
+              "LINE_IN", "Line In Jack",
+              "MIC_IN", "Mic Jack";
+      nvidia,i2s-controller = <&tegra_i2s2>;
+      nvidia,audio-codec = <&codec>;
+      clocks = <&tegra_car TEGRA30_CLK_PLL_A>,
+               <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
+               <&tegra_car TEGRA30_CLK_EXTERN1>;
+      clock-names = "pll_a", "pll_a_out0", "mclk";
+    };
diff --git a/dts/Bindings/sound/nvidia,tegra-audio-trimslice.txt b/dts/Bindings/sound/nvidia,tegra-audio-trimslice.txt
deleted file mode 100644
index ef1fe73582..0000000000
--- a/dts/Bindings/sound/nvidia,tegra-audio-trimslice.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-NVIDIA Tegra audio complex for TrimSlice
-
-Required properties:
-- compatible : "nvidia,tegra-audio-trimslice"
-- clocks : Must contain an entry for each entry in clock-names.
-- clock-names : Must include the following entries:
-  "pll_a" (The Tegra clock of that name),
-  "pll_a_out0" (The Tegra clock of that name),
-  "mclk" (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
-- nvidia,i2s-controller : The phandle of the Tegra I2S1 controller
-- nvidia,audio-codec : The phandle of the WM8903 audio codec
-
-Example:
-
-sound {
-	compatible = "nvidia,tegra-audio-trimslice";
-	nvidia,i2s-controller = <&tegra_i2s1>;
-	nvidia,audio-codec = <&codec>;
-	clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 93>;
-	clock-names = "pll_a", "pll_a_out0", "mclk";
-};
diff --git a/dts/Bindings/sound/nvidia,tegra-audio-trimslice.yaml b/dts/Bindings/sound/nvidia,tegra-audio-trimslice.yaml
new file mode 100644
index 0000000000..8c87cd1662
--- /dev/null
+++ b/dts/Bindings/sound/nvidia,tegra-audio-trimslice.yaml
@@ -0,0 +1,33 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra-audio-trimslice.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra audio complex with TrimSlice CODEC
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+allOf:
+  - $ref: nvidia,tegra-audio-common.yaml#
+
+properties:
+  compatible:
+    const: nvidia,tegra-audio-trimslice
+
+required:
+  - nvidia,i2s-controller
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    sound {
+        compatible = "nvidia,tegra-audio-trimslice";
+        nvidia,i2s-controller = <&tegra_i2s1>;
+        nvidia,audio-codec = <&codec>;
+        clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 93>;
+        clock-names = "pll_a", "pll_a_out0", "mclk";
+    };
diff --git a/dts/Bindings/sound/nvidia,tegra-audio-wm8753.txt b/dts/Bindings/sound/nvidia,tegra-audio-wm8753.txt
deleted file mode 100644
index 96f6a57dd6..0000000000
--- a/dts/Bindings/sound/nvidia,tegra-audio-wm8753.txt
+++ /dev/null
@@ -1,40 +0,0 @@
-NVIDIA Tegra audio complex
-
-Required properties:
-- compatible : "nvidia,tegra-audio-wm8753"
-- clocks : Must contain an entry for each entry in clock-names.
-  See ../clocks/clock-bindings.txt for details.
-- clock-names : Must include the following entries:
-  - pll_a
-  - pll_a_out0
-  - mclk (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
-- nvidia,model : The user-visible name of this sound complex.
-- nvidia,audio-routing : A list of the connections between audio components.
-  Each entry is a pair of strings, the first being the connection's sink,
-  the second being the connection's source. Valid names for sources and
-  sinks are the WM8753's pins as documented in the binding for the WM8753,
-  and the jacks on the board:
-
-  * Headphone Jack
-  * Mic Jack
-
-- nvidia,i2s-controller : The phandle of the Tegra I2S1 controller
-- nvidia,audio-codec : The phandle of the WM8753 audio codec
-Example:
-
-sound {
-	compatible = "nvidia,tegra-audio-wm8753-whistler",
-		     "nvidia,tegra-audio-wm8753"
-	nvidia,model = "tegra-wm8753-harmony";
-
-	nvidia,audio-routing =
-		"Headphone Jack", "LOUT1",
-		"Headphone Jack", "ROUT1";
-
-	nvidia,i2s-controller = <&i2s1>;
-	nvidia,audio-codec = <&wm8753>;
-
-	clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 93>;
-	clock-names = "pll_a", "pll_a_out0", "mclk";
-};
-
diff --git a/dts/Bindings/sound/nvidia,tegra-audio-wm8753.yaml b/dts/Bindings/sound/nvidia,tegra-audio-wm8753.yaml
new file mode 100644
index 0000000000..a5b431d7d0
--- /dev/null
+++ b/dts/Bindings/sound/nvidia,tegra-audio-wm8753.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra-audio-wm8753.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra audio complex with WM8753 CODEC
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+allOf:
+  - $ref: nvidia,tegra-audio-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - pattern: '^[a-z0-9]+,tegra-audio-wm8753(-[a-z0-9]+)+$'
+      - const: nvidia,tegra-audio-wm8753
+
+  nvidia,audio-routing:
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+    description: |
+      A list of the connections between audio components.
+      Each entry is a pair of strings, the first being the connection's sink,
+      the second being the connection's source. Valid names for sources and
+      sinks are the pins (documented in the binding document),
+      and the jacks on the board.
+    minItems: 2
+    items:
+      enum:
+        # Board Connectors
+        - "Headphone Jack"
+        - "Mic Jack"
+
+        # CODEC Pins
+        - LOUT1
+        - LOUT2
+        - ROUT1
+        - ROUT2
+        - MONO1
+        - MONO2
+        - OUT3
+        - OUT4
+        - LINE1
+        - LINE2
+        - RXP
+        - RXN
+        - ACIN
+        - ACOP
+        - MIC1N
+        - MIC1
+        - MIC2N
+        - MIC2
+        - "Mic Bias"
+
+required:
+  - nvidia,i2s-controller
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    sound {
+        compatible = "nvidia,tegra-audio-wm8753-whistler",
+                     "nvidia,tegra-audio-wm8753";
+        nvidia,model = "tegra-wm8753-harmony";
+
+        nvidia,audio-routing =
+                "Headphone Jack", "LOUT1",
+                "Headphone Jack", "ROUT1";
+
+        nvidia,i2s-controller = <&i2s1>;
+        nvidia,audio-codec = <&wm8753>;
+
+        clocks = <&clk 112>, <&clk 113>, <&clk 93>;
+        clock-names = "pll_a", "pll_a_out0", "mclk";
+    };
diff --git a/dts/Bindings/sound/nvidia,tegra-audio-wm8903.txt b/dts/Bindings/sound/nvidia,tegra-audio-wm8903.txt
deleted file mode 100644
index bbd581a8c5..0000000000
--- a/dts/Bindings/sound/nvidia,tegra-audio-wm8903.txt
+++ /dev/null
@@ -1,62 +0,0 @@
-NVIDIA Tegra audio complex
-
-Required properties:
-- compatible : "nvidia,tegra-audio-wm8903"
-- clocks : Must contain an entry for each entry in clock-names.
-  See ../clocks/clock-bindings.txt for details.
-- clock-names : Must include the following entries:
-  - pll_a
-  - pll_a_out0
-  - mclk (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
-- nvidia,model : The user-visible name of this sound complex.
-- nvidia,audio-routing : A list of the connections between audio components.
-  Each entry is a pair of strings, the first being the connection's sink,
-  the second being the connection's source. Valid names for sources and
-  sinks are the WM8903's pins (documented in the WM8903 binding document),
-  and the jacks on the board:
-
-  * Headphone Jack
-  * Int Spk
-  * Mic Jack
-  * Int Mic
-
-- nvidia,i2s-controller : The phandle of the Tegra I2S1 controller
-- nvidia,audio-codec : The phandle of the WM8903 audio codec
-
-Optional properties:
-- nvidia,spkr-en-gpios : The GPIO that enables the speakers
-- nvidia,hp-mute-gpios : The GPIO that mutes the headphones
-- nvidia,hp-det-gpios : The GPIO that detect headphones are plugged in
-- nvidia,int-mic-en-gpios : The GPIO that enables the internal microphone
-- nvidia,ext-mic-en-gpios : The GPIO that enables the external microphone
-- nvidia,headset : The Mic Jack represents state of the headset microphone pin
-
-Example:
-
-sound {
-	compatible = "nvidia,tegra-audio-wm8903-harmony",
-		     "nvidia,tegra-audio-wm8903"
-	nvidia,model = "tegra-wm8903-harmony";
-
-	nvidia,audio-routing =
-		"Headphone Jack", "HPOUTR",
-		"Headphone Jack", "HPOUTL",
-		"Int Spk", "ROP",
-		"Int Spk", "RON",
-		"Int Spk", "LOP",
-		"Int Spk", "LON",
-		"Mic Jack", "MICBIAS",
-		"IN1L", "Mic Jack";
-
-	nvidia,i2s-controller = <&i2s1>;
-	nvidia,audio-codec = <&wm8903>;
-
-	nvidia,spkr-en-gpios = <&codec 2 0>;
-	nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */
-	nvidia,int-mic-en-gpios = <&gpio 184 0>; /*gpio PX0 */
-	nvidia,ext-mic-en-gpios = <&gpio 185 0>; /* gpio PX1 */
-
-	clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 93>;
-	clock-names = "pll_a", "pll_a_out0", "mclk";
-};
-
diff --git a/dts/Bindings/sound/nvidia,tegra-audio-wm8903.yaml b/dts/Bindings/sound/nvidia,tegra-audio-wm8903.yaml
new file mode 100644
index 0000000000..1b836acab9
--- /dev/null
+++ b/dts/Bindings/sound/nvidia,tegra-audio-wm8903.yaml
@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra-audio-wm8903.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra audio complex with WM8903 CODEC
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+allOf:
+  - $ref: nvidia,tegra-audio-common.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - pattern: '^[a-z0-9]+,tegra-audio-wm8903(-[a-z0-9]+)+$'
+          - const: nvidia,tegra-audio-wm8903
+      - items:
+          - pattern: ad,tegra-audio-plutux
+          - const: nvidia,tegra-audio-wm8903
+
+  nvidia,audio-routing:
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+    description: |
+      A list of the connections between audio components.
+      Each entry is a pair of strings, the first being the connection's sink,
+      the second being the connection's source. Valid names for sources and
+      sinks are the pins (documented in the binding document),
+      and the jacks on the board.
+    minItems: 2
+    items:
+      enum:
+        # Board Connectors
+        - "Headphone Jack"
+        - "Int Spk"
+        - "Mic Jack"
+        - "Int Mic"
+
+        # CODEC Pins
+        - IN1L
+        - IN1R
+        - IN2L
+        - IN2R
+        - IN3L
+        - IN3R
+        - DMICDAT
+        - HPOUTL
+        - HPOUTR
+        - LINEOUTL
+        - LINEOUTR
+        - LOP
+        - LON
+        - ROP
+        - RON
+        - MICBIAS
+
+required:
+  - nvidia,i2s-controller
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    sound {
+        compatible = "nvidia,tegra-audio-wm8903-harmony",
+                     "nvidia,tegra-audio-wm8903";
+        nvidia,model = "tegra-wm8903-harmony";
+
+        nvidia,audio-routing =
+                "Headphone Jack", "HPOUTR",
+                "Headphone Jack", "HPOUTL",
+                "Int Spk", "ROP",
+                "Int Spk", "RON",
+                "Int Spk", "LOP",
+                "Int Spk", "LON",
+                "Mic Jack", "MICBIAS",
+                "IN1L", "Mic Jack";
+
+        nvidia,i2s-controller = <&i2s1>;
+        nvidia,audio-codec = <&wm8903>;
+
+        nvidia,spkr-en-gpios = <&codec 2 0>;
+        nvidia,hp-det-gpios = <&gpio 178 0>;
+        nvidia,int-mic-en-gpios = <&gpio 184 0>;
+        nvidia,ext-mic-en-gpios = <&gpio 185 0>;
+
+        clocks = <&clk 112>, <&clk 113>, <&clk 93>;
+        clock-names = "pll_a", "pll_a_out0", "mclk";
+    };
diff --git a/dts/Bindings/sound/nvidia,tegra-audio-wm9712.txt b/dts/Bindings/sound/nvidia,tegra-audio-wm9712.txt
deleted file mode 100644
index 436f6cd9d0..0000000000
--- a/dts/Bindings/sound/nvidia,tegra-audio-wm9712.txt
+++ /dev/null
@@ -1,60 +0,0 @@
-NVIDIA Tegra audio complex
-
-Required properties:
-- compatible : "nvidia,tegra-audio-wm9712"
-- clocks : Must contain an entry for each entry in clock-names.
-  See ../clocks/clock-bindings.txt for details.
-- clock-names : Must include the following entries:
-  - pll_a
-  - pll_a_out0
-  - mclk (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
-- nvidia,model : The user-visible name of this sound complex.
-- nvidia,audio-routing : A list of the connections between audio components.
-  Each entry is a pair of strings, the first being the connection's sink,
-  the second being the connection's source. Valid names for sources and
-  sinks are the WM9712's pins, and the jacks on the board:
-
-  WM9712 pins:
-
-  * MONOOUT
-  * HPOUTL
-  * HPOUTR
-  * LOUT2
-  * ROUT2
-  * OUT3
-  * LINEINL
-  * LINEINR
-  * PHONE
-  * PCBEEP
-  * MIC1
-  * MIC2
-  * Mic Bias
-
-  Board connectors:
-
-  * Headphone
-  * LineIn
-  * Mic
-
-- nvidia,ac97-controller : The phandle of the Tegra AC97 controller
-
-
-Example:
-
-sound {
-	compatible = "nvidia,tegra-audio-wm9712-colibri_t20",
-		         "nvidia,tegra-audio-wm9712";
-	nvidia,model = "Toradex Colibri T20";
-
-	nvidia,audio-routing =
-		"Headphone", "HPOUTL",
-		"Headphone", "HPOUTR",
-		"LineIn", "LINEINL",
-		"LineIn", "LINEINR",
-		"Mic", "MIC1";
-
-	nvidia,ac97-controller = <&ac97>;
-
-	clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 93>;
-	clock-names = "pll_a", "pll_a_out0", "mclk";
-};
diff --git a/dts/Bindings/sound/nvidia,tegra-audio-wm9712.yaml b/dts/Bindings/sound/nvidia,tegra-audio-wm9712.yaml
new file mode 100644
index 0000000000..a144828334
--- /dev/null
+++ b/dts/Bindings/sound/nvidia,tegra-audio-wm9712.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra-audio-wm9712.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra audio complex with WM9712 CODEC
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+allOf:
+  - $ref: nvidia,tegra-audio-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - pattern: '^[a-z0-9]+,tegra-audio-wm9712([-_][a-z0-9]+)+$'
+      - const: nvidia,tegra-audio-wm9712
+
+  nvidia,audio-routing:
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+    description: |
+      A list of the connections between audio components.
+      Each entry is a pair of strings, the first being the connection's sink,
+      the second being the connection's source. Valid names for sources and
+      sinks are the pins (documented in the binding document),
+      and the jacks on the board.
+    minItems: 2
+    items:
+      enum:
+        # Board Connectors
+        - "Headphone"
+        - "LineIn"
+        - "Mic"
+
+        # CODEC Pins
+        - MONOOUT
+        - HPOUTL
+        - HPOUTR
+        - LOUT2
+        - ROUT2
+        - OUT3
+        - LINEINL
+        - LINEINR
+        - PHONE
+        - PCBEEP
+        - MIC1
+        - MIC2
+        - "Mic Bias"
+
+required:
+  - nvidia,ac97-controller
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    sound {
+        compatible = "nvidia,tegra-audio-wm9712-colibri_t20",
+                     "nvidia,tegra-audio-wm9712";
+        nvidia,model = "Toradex Colibri T20";
+
+        nvidia,audio-routing =
+                "Headphone", "HPOUTL",
+                "Headphone", "HPOUTR",
+                "LineIn", "LINEINL",
+                "LineIn", "LINEINR",
+                "Mic", "MIC1";
+
+        nvidia,ac97-controller = <&ac97>;
+
+        clocks = <&clk 112>, <&clk 113>, <&clk 93>;
+        clock-names = "pll_a", "pll_a_out0", "mclk";
+    };
diff --git a/dts/Bindings/sound/nvidia,tegra20-i2s.txt b/dts/Bindings/sound/nvidia,tegra20-i2s.txt
deleted file mode 100644
index dc30c6bfbe..0000000000
--- a/dts/Bindings/sound/nvidia,tegra20-i2s.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-NVIDIA Tegra 20 I2S controller
-
-Required properties:
-- compatible : "nvidia,tegra20-i2s"
-- reg : Should contain I2S registers location and length
-- interrupts : Should contain I2S interrupt
-- resets : Must contain an entry for each entry in reset-names.
-  See ../reset/reset.txt for details.
-- reset-names : Must include the following entries:
-  - i2s
-- dmas : Must contain an entry for each entry in clock-names.
-  See ../dma/dma.txt for details.
-- dma-names : Must include the following entries:
-  - rx
-  - tx
-- clocks : Must contain one entry, for the module clock.
-  See ../clocks/clock-bindings.txt for details.
-
-Example:
-
-i2s@70002800 {
-	compatible = "nvidia,tegra20-i2s";
-	reg = <0x70002800 0x200>;
-	interrupts = < 45 >;
-	clocks = <&tegra_car 11>;
-	resets = <&tegra_car 11>;
-	reset-names = "i2s";
-	dmas = <&apbdma 21>, <&apbdma 21>;
-	dma-names = "rx", "tx";
-};
diff --git a/dts/Bindings/sound/nvidia,tegra20-i2s.yaml b/dts/Bindings/sound/nvidia,tegra20-i2s.yaml
new file mode 100644
index 0000000000..68ae124eaf
--- /dev/null
+++ b/dts/Bindings/sound/nvidia,tegra20-i2s.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra20-i2s.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra20 I2S Controller
+
+description: |
+  The I2S Controller streams synchronous serial audio data between system
+  memory and an external audio device. The controller supports the I2S Left
+  Justified Mode, Right Justified Mode, and DSP mode formats.
+
+maintainers:
+  - Thierry Reding <treding@nvidia.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  compatible:
+    const: nvidia,tegra20-i2s
+
+  reg:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    const: i2s
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+
+  dmas:
+    minItems: 2
+
+  dma-names:
+    items:
+      - const: rx
+      - const: tx
+
+  nvidia,fixed-parent-rate:
+    description: |
+      Specifies whether board prefers parent clock to stay at a fixed rate.
+      This allows multiple Tegra20 audio components work simultaneously by
+      limiting number of supportable audio rates.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+  - resets
+  - reset-names
+  - interrupts
+  - clocks
+  - dmas
+  - dma-names
+
+additionalProperties: false
+
+examples:
+  - |
+    i2s@70002800 {
+        compatible = "nvidia,tegra20-i2s";
+        reg = <0x70002800 0x200>;
+        interrupts = <45>;
+        clocks = <&tegra_car 11>;
+        resets = <&tegra_car 11>;
+        reset-names = "i2s";
+        dmas = <&apbdma 21>, <&apbdma 21>;
+        dma-names = "rx", "tx";
+    };
+
+...
diff --git a/dts/Bindings/sound/nvidia,tegra20-spdif.yaml b/dts/Bindings/sound/nvidia,tegra20-spdif.yaml
new file mode 100644
index 0000000000..60a368a132
--- /dev/null
+++ b/dts/Bindings/sound/nvidia,tegra20-spdif.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra20-spdif.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra20 S/PDIF Controller
+
+description: |
+  The S/PDIF controller supports both input and output in serial audio
+  digital interface format. The input controller can digitally recover
+  a clock from the received stream. The S/PDIF controller is also used
+  to generate the embedded audio for HDMI output channel.
+
+maintainers:
+  - Thierry Reding <treding@nvidia.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  compatible:
+    const: nvidia,tegra20-spdif
+
+  reg:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+
+  clock-names:
+    items:
+      - const: out
+      - const: in
+
+  dmas:
+    minItems: 2
+
+  dma-names:
+    items:
+      - const: rx
+      - const: tx
+
+  "#sound-dai-cells":
+    const: 0
+
+  nvidia,fixed-parent-rate:
+    description: |
+      Specifies whether board prefers parent clock to stay at a fixed rate.
+      This allows multiple Tegra20 audio components work simultaneously by
+      limiting number of supportable audio rates.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+  - resets
+  - interrupts
+  - clocks
+  - clock-names
+  - dmas
+  - dma-names
+  - "#sound-dai-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    spdif@70002400 {
+        compatible = "nvidia,tegra20-spdif";
+        reg = <0x70002400 0x200>;
+        interrupts = <77>;
+        clocks = <&clk 99>, <&clk 98>;
+        clock-names = "out", "in";
+        resets = <&rst 10>;
+        dmas = <&apbdma 3>, <&apbdma 3>;
+        dma-names = "rx", "tx";
+        #sound-dai-cells = <0>;
+    };
+
+...
diff --git a/dts/Bindings/sound/nvidia,tegra30-hda.yaml b/dts/Bindings/sound/nvidia,tegra30-hda.yaml
index b55775e21d..2c913aa44f 100644
--- a/dts/Bindings/sound/nvidia,tegra30-hda.yaml
+++ b/dts/Bindings/sound/nvidia,tegra30-hda.yaml
@@ -50,9 +50,11 @@ properties:
       - const: hda2codec_2x
 
   resets:
+    minItems: 2
     maxItems: 3
 
   reset-names:
+    minItems: 2
     items:
       - const: hda
       - const: hda2hdmi
diff --git a/dts/Bindings/sound/nxp,tfa989x.yaml b/dts/Bindings/sound/nxp,tfa989x.yaml
index 7667471be1..b9b1dba408 100644
--- a/dts/Bindings/sound/nxp,tfa989x.yaml
+++ b/dts/Bindings/sound/nxp,tfa989x.yaml
@@ -24,11 +24,23 @@ properties:
   '#sound-dai-cells':
     const: 0
 
+  rcv-gpios:
+    description: optional GPIO to be asserted when receiver mode is enabled.
+
   sound-name-prefix: true
 
   vddd-supply:
     description: regulator phandle for the VDDD power supply.
 
+if:
+  not:
+    properties:
+      compatible:
+        const: nxp,tfa9897
+then:
+  properties:
+    rcv-gpios: false
+
 required:
   - compatible
   - reg
@@ -55,3 +67,32 @@ examples:
         #sound-dai-cells = <0>;
       };
     };
+
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      speaker_codec_top: audio-codec@34 {
+        compatible = "nxp,tfa9897";
+        reg = <0x34>;
+        vddd-supply = <&pm8916_l6>;
+        rcv-gpios = <&msmgpio 50 GPIO_ACTIVE_HIGH>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&speaker_top_default>;
+        sound-name-prefix = "Speaker Top";
+        #sound-dai-cells = <0>;
+      };
+
+      speaker_codec_bottom: audio-codec@36 {
+        compatible = "nxp,tfa9897";
+        reg = <0x36>;
+        vddd-supply = <&pm8916_l6>;
+        rcv-gpios = <&msmgpio 111 GPIO_ACTIVE_HIGH>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&speaker_bottom_default>;
+        sound-name-prefix = "Speaker Bottom";
+        #sound-dai-cells = <0>;
+      };
+    };
diff --git a/dts/Bindings/sound/qcom,apq8016-sbc.txt b/dts/Bindings/sound/qcom,apq8016-sbc.txt
deleted file mode 100644
index 23998262a0..0000000000
--- a/dts/Bindings/sound/qcom,apq8016-sbc.txt
+++ /dev/null
@@ -1,96 +0,0 @@
-* Qualcomm Technologies APQ8016 SBC ASoC machine driver
-
-This node models the Qualcomm Technologies APQ8016 SBC ASoC machine driver
-
-Required properties:
-
-- compatible		: "qcom,apq8016-sbc-sndcard"
-
-- pinctrl-N		: One property must exist for each entry in
-			  pinctrl-names.  See ../pinctrl/pinctrl-bindings.txt
-			  for details of the property values.
-- pinctrl-names		: Must contain a "default" entry.
-- reg			: Must contain an address for each entry in reg-names.
-- reg-names		: A list which must include the following entries:
-				* "mic-iomux"
-				* "spkr-iomux"
-- qcom,model		: Name of the sound card.
-
-- qcom,audio-routing	: A list of the connections between audio components.
-			  Each entry is a pair of strings, the first being the
-			  connection's sink, the second being the connection's
-			  source. Valid names could be power supplies, MicBias
-			  of msm8x16_wcd codec and the jacks on the board:
-
-			  Power supplies:
-			  * MIC BIAS External1
-			  * MIC BIAS External2
-			  * MIC BIAS Internal1
-			  * MIC BIAS Internal2
-
-			  Board connectors:
-			  * Headset Mic
-			  * Secondary Mic
-			  * DMIC
-			  * Ext Spk
-
-Optional properties:
-
-- aux-devs		: A list of phandles for auxiliary devices (e.g. analog
-			  amplifiers) that do not appear directly within the DAI
-			  links. Should be connected to another audio component
-			  using "qcom,audio-routing".
-
-Dai-link subnode properties and subnodes:
-
-Required dai-link subnodes:
-
-- cpu					: CPU   sub-node
-- codec					: CODEC sub-node
-
-Required CPU/CODEC subnodes properties:
-
--link-name		: Name of the dai link.
--sound-dai		: phandle/s and port of CPU/CODEC
-
-Example:
-
-sound: sound {
-	compatible = "qcom,apq8016-sbc-sndcard";
-	reg = <0x07702000 0x4>, <0x07702004 0x4>;
-	reg-names = "mic-iomux", "spkr-iomux";
-	qcom,model = "DB410c";
-
-	qcom,audio-routing =
-		"MIC BIAS External1", "Handset Mic",
-		"MIC BIAS Internal2", "Headset Mic",
-		"MIC BIAS External1", "Secondary Mic",
-		"AMIC1", "MIC BIAS External1",
-		"AMIC2", "MIC BIAS Internal2",
-		"AMIC3", "MIC BIAS External1",
-		"DMIC1", "MIC BIAS Internal1",
-		"MIC BIAS Internal1", "Digital Mic1",
-		"DMIC2", "MIC BIAS Internal1",
-		"MIC BIAS Internal1", "Digital Mic2";
-
-	/* I2S - Internal codec */
-	internal-dai-link@0 {
-		cpu { /* PRIMARY */
-			sound-dai = <&lpass MI2S_PRIMARY>;
-		};
-		codec {
-			sound-dai = <&lpass_codec 0>, <&wcd_codec 0>;
-		};
-	};
-
-	/* External Primary or External Secondary -ADV7533 HDMI */
-	external-dai-link@0 {
-		link-name = "ADV7533";
-		cpu { /* QUAT */
-			sound-dai = <&lpass MI2S_QUATERNARY>;
-		};
-		codec {
-			sound-dai = <&adv_bridge 0>;
-		};
-	};
-};
diff --git a/dts/Bindings/sound/qcom,sm8250.yaml b/dts/Bindings/sound/qcom,sm8250.yaml
index 7d57eb9165..4bfda04b46 100644
--- a/dts/Bindings/sound/qcom,sm8250.yaml
+++ b/dts/Bindings/sound/qcom,sm8250.yaml
@@ -4,18 +4,20 @@
 $id: http://devicetree.org/schemas/sound/qcom,sm8250.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Technologies Inc. SM8250 ASoC sound card driver
+title: Qualcomm Technologies Inc. ASoC sound card drivers
 
 maintainers:
   - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
 
 description:
-  This bindings describes SC8250 SoC based sound cards
+  This bindings describes Qualcomm SoC based sound cards
   which uses LPASS internal codec for audio.
 
 properties:
   compatible:
     enum:
+      - qcom,apq8016-sbc-sndcard
+      - qcom,msm8916-qdsp6-sndcard
       - qcom,sm8250-sndcard
       - qcom,qrb5165-rb5-sndcard
 
@@ -27,10 +29,28 @@ properties:
       being the connection's source. Valid names could be power supplies,
       MicBias of codec and the jacks on the board.
 
+  aux-devs:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: |
+      List of phandles pointing to auxiliary devices, such
+      as amplifiers, to be added to the sound card.
+
   model:
     $ref: /schemas/types.yaml#/definitions/string
     description: User visible long sound card name
 
+  pin-switches:
+    description: List of widget names for which pin switches should be created.
+    $ref: /schemas/types.yaml#/definitions/string-array
+
+  widgets:
+    description: User specified audio sound widgets.
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+
+  # Only valid for some compatibles (see allOf if below)
+  reg: true
+  reg-names: true
+
 patternProperties:
   ".*-dai-link$":
     description:
@@ -73,6 +93,34 @@ required:
   - compatible
   - model
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,apq8016-sbc-sndcard
+              - qcom,msm8916-qdsp6-sndcard
+    then:
+      properties:
+        reg:
+          items:
+            - description: Microphone I/O mux register address
+            - description: Speaker I/O mux register address
+        reg-names:
+          items:
+            - const: mic-iomux
+            - const: spkr-iomux
+      required:
+        - compatible
+        - model
+        - reg
+        - reg-names
+    else:
+      properties:
+        reg: false
+        reg-names: false
+
 additionalProperties: false
 
 examples:
@@ -86,10 +134,7 @@ examples:
         audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT",
                     "SpkrRight IN", "WSA_SPK2 OUT",
                     "VA DMIC0", "vdd-micb",
-                    "VA DMIC1", "vdd-micb",
-                    "MM_DL1",  "MultiMedia1 Playback",
-                    "MM_DL2",  "MultiMedia2 Playback",
-                    "MultiMedia3 Capture", "MM_UL3";
+                    "VA DMIC1", "vdd-micb";
 
         mm1-dai-link {
             link-name = "MultiMedia0";
@@ -157,3 +202,98 @@ examples:
             };
         };
     };
+
+  - |
+    #include <dt-bindings/sound/qcom,lpass.h>
+    sound@7702000 {
+        compatible = "qcom,apq8016-sbc-sndcard";
+        reg = <0x07702000 0x4>, <0x07702004 0x4>;
+        reg-names = "mic-iomux", "spkr-iomux";
+
+        model = "DB410c";
+        audio-routing =
+            "AMIC2", "MIC BIAS Internal2",
+            "AMIC3", "MIC BIAS External1";
+
+        pinctrl-0 = <&cdc_pdm_lines_act &ext_sec_tlmm_lines_act &ext_mclk_tlmm_lines_act>;
+        pinctrl-1 = <&cdc_pdm_lines_sus &ext_sec_tlmm_lines_sus &ext_mclk_tlmm_lines_sus>;
+        pinctrl-names = "default", "sleep";
+
+        quaternary-dai-link {
+            link-name = "ADV7533";
+            cpu {
+                sound-dai = <&lpass MI2S_QUATERNARY>;
+            };
+            codec {
+                sound-dai = <&adv_bridge 0>;
+            };
+        };
+
+        primary-dai-link {
+            link-name = "WCD";
+            cpu {
+                sound-dai = <&lpass MI2S_PRIMARY>;
+            };
+            codec {
+                sound-dai = <&lpass_codec 0>, <&wcd_codec 0>;
+            };
+        };
+
+        tertiary-dai-link {
+            link-name = "WCD-Capture";
+            cpu {
+                sound-dai = <&lpass MI2S_TERTIARY>;
+            };
+            codec {
+                sound-dai = <&lpass_codec 1>, <&wcd_codec 1>;
+            };
+        };
+    };
+
+  - |
+    #include <dt-bindings/sound/qcom,q6afe.h>
+    #include <dt-bindings/sound/qcom,q6asm.h>
+    sound@7702000 {
+        compatible = "qcom,msm8916-qdsp6-sndcard";
+        reg = <0x07702000 0x4>, <0x07702004 0x4>;
+        reg-names = "mic-iomux", "spkr-iomux";
+
+        model = "msm8916";
+        widgets =
+            "Speaker", "Speaker",
+            "Headphone", "Headphones";
+        pin-switches = "Speaker";
+        audio-routing =
+            "Speaker", "Speaker Amp OUT",
+            "Speaker Amp IN", "HPH_R",
+            "Headphones", "HPH_L",
+            "Headphones", "HPH_R",
+            "AMIC1", "MIC BIAS Internal1",
+            "AMIC2", "MIC BIAS Internal2",
+            "AMIC3", "MIC BIAS Internal3";
+        aux-devs = <&speaker_amp>;
+
+        pinctrl-names = "default", "sleep";
+        pinctrl-0 = <&cdc_pdm_lines_act>;
+        pinctrl-1 = <&cdc_pdm_lines_sus>;
+
+        mm1-dai-link {
+            link-name = "MultiMedia1";
+            cpu {
+                sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
+            };
+        };
+
+        primary-dai-link {
+            link-name = "Primary MI2S";
+            cpu {
+                sound-dai = <&q6afedai PRIMARY_MI2S_RX>;
+            };
+            platform {
+                sound-dai = <&q6routing>;
+            };
+            codec {
+                sound-dai = <&lpass_codec 0>, <&wcd_codec 0>;
+            };
+        };
+    };
diff --git a/dts/Bindings/sound/realtek,rt5682s.yaml b/dts/Bindings/sound/realtek,rt5682s.yaml
index 2b8b7b51fe..d65c0ed506 100644
--- a/dts/Bindings/sound/realtek,rt5682s.yaml
+++ b/dts/Bindings/sound/realtek,rt5682s.yaml
@@ -61,6 +61,10 @@ properties:
     description: |
       Set the delay time (ms) for the requirement of the particular DMIC.
 
+  realtek,amic-delay-ms:
+    description: |
+      Set the delay time (ms) for the requirement of the particular platform or AMIC.
+
   realtek,dmic-clk-driving-high:
     type: boolean
     description: |
diff --git a/dts/Bindings/sound/samsung-i2s.yaml b/dts/Bindings/sound/samsung-i2s.yaml
index 2e3628ef48..84c4d6cba5 100644
--- a/dts/Bindings/sound/samsung-i2s.yaml
+++ b/dts/Bindings/sound/samsung-i2s.yaml
@@ -110,12 +110,6 @@ properties:
       Internal DMA register base address of the audio
       subsystem (used in secondary sound source).
 
-  pinctrl-0:
-    description: Should specify pin control groups used for this controller.
-
-  pinctrl-names:
-    const: default
-
   power-domains:
     maxItems: 1
 
diff --git a/dts/Bindings/sound/simple-audio-amplifier.yaml b/dts/Bindings/sound/simple-audio-amplifier.yaml
index 26379377a7..8327846356 100644
--- a/dts/Bindings/sound/simple-audio-amplifier.yaml
+++ b/dts/Bindings/sound/simple-audio-amplifier.yaml
@@ -9,6 +9,9 @@ title: Simple Audio Amplifier Device Tree Bindings
 maintainers:
   - Jerome Brunet <jbrunet@baylibre.com>
 
+allOf:
+  - $ref: name-prefix.yaml#
+
 properties:
   compatible:
     enum:
@@ -22,10 +25,7 @@ properties:
     description: >
       power supply for the device
 
-  sound-name-prefix:
-    $ref: /schemas/types.yaml#/definitions/string
-    description: >
-      See ./name-prefix.txt
+  sound-name-prefix: true
 
 required:
   - compatible
diff --git a/dts/Bindings/sound/ti,tlv320adc3xxx.yaml b/dts/Bindings/sound/ti,tlv320adc3xxx.yaml
new file mode 100644
index 0000000000..83936f594d
--- /dev/null
+++ b/dts/Bindings/sound/ti,tlv320adc3xxx.yaml
@@ -0,0 +1,137 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/ti,tlv320adc3xxx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments TLV320ADC3001/TLV320ADC3101 Stereo ADC
+
+maintainers:
+  - Ricard Wanderlof <ricardw@axis.com>
+
+description: |
+  Texas Instruments TLV320ADC3001 and TLV320ADC3101 Stereo ADC
+  https://www.ti.com/product/TLV320ADC3001
+  https://www.ti.com/product/TLV320ADC3101
+
+properties:
+  compatible:
+    enum:
+      - ti,tlv320adc3001
+      - ti,tlv320adc3101
+
+  reg:
+    maxItems: 1
+    description: I2C address
+
+  '#sound-dai-cells':
+    const: 0
+
+  '#gpio-cells':
+    const: 2
+
+  gpio-controller: true
+
+  reset-gpios:
+    maxItems: 1
+    description: GPIO pin used for codec reset (RESET pin)
+
+  clocks:
+    maxItems: 1
+    description: Master clock (MCLK)
+
+  ti,dmdin-gpio1:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 0 # ADC3XXX_GPIO_DISABLED       - I/O buffers powered down and not used
+      - 1 # ADC3XXX_GPIO_INPUT          - Various non-GPIO input functions
+      - 2 # ADC3XXX_GPIO_GPI            - General purpose input
+      - 3 # ADC3XXX_GPIO_GPO            - General purpose output
+      - 4 # ADC3XXX_GPIO_CLKOUT         - Clock source set in CLKOUT_MUX reg
+      - 5 # ADC3XXX_GPIO_INT1           - INT1 output
+      - 6 # ADC3XXX_GPIO_SECONDARY_BCLK - Codec interface secondary BCLK
+      - 7 # ADC3XXX_GPIO_SECONDARY_WCLK - Codec interface secondary WCLK
+    default: 0
+    description: |
+      Configuration for DMDIN/GPIO1 pin.
+
+      When ADC3XXX_GPIO_GPO is configured, this causes corresponding the
+      ALSA control "GPIOx Output" to appear, as a switch control.
+
+  ti,dmclk-gpio2:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 0 # ADC3XXX_GPIO_DISABLED       - I/O buffers powered down and not used
+      - 1 # ADC3XXX_GPIO_INPUT          - Various non-GPIO input functions
+      - 2 # ADC3XXX_GPIO_GPI            - General purpose input
+      - 3 # ADC3XXX_GPIO_GPO            - General purpose output
+      - 4 # ADC3XXX_GPIO_CLKOUT         - Clock source set in CLKOUT_MUX reg
+      - 5 # ADC3XXX_GPIO_INT1           - INT1 output
+      - 6 # ADC3XXX_GPIO_SECONDARY_BCLK - Codec interface secondary BCLK
+      - 7 # ADC3XXX_GPIO_SECONDARY_WCLK - Codec interface secondary WCLK
+    default: 0
+    description: |
+      Configuration for DMCLK/GPIO2 pin.
+
+      When ADC3XXX_GPIO_GPO is configured, this causes corresponding the
+      ALSA control "GPIOx Output" to appear, as a switch control.
+
+      Note that there is currently no support for reading the GPIO pins as
+      inputs.
+
+  ti,micbias1-vg:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 0 # ADC3XXX_MICBIAS_OFF		- Mic bias is powered down
+      - 1 # ADC3XXX_MICBIAS_2_0V	- Mic bias is set to 2.0V
+      - 2 # ADC3XXX_MICBIAS_2_5V	- Mic bias is set to 2.5V
+      - 3 # ADC3XXX_MICBIAS_AVDD	- Mic bias is same as AVDD supply
+    default: 0
+    description: |
+      Mic bias voltage output on MICBIAS1 pin
+
+  ti,micbias2-vg:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 0 # ADC3XXX_MICBIAS_OFF		- Mic bias is powered down
+      - 1 # ADC3XXX_MICBIAS_2_0V	- Mic bias is set to 2.0V
+      - 2 # ADC3XXX_MICBIAS_2_5V	- Mic bias is set to 2.5V
+      - 3 # ADC3XXX_MICBIAS_AVDD	- Mic bias is same as AVDD supply
+    default: 0
+    description: |
+      Mic bias voltage output on MICBIAS2 pin
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/sound/tlv320adc3xxx.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        tlv320adc3101: audio-codec@18 {
+            compatible = "ti,tlv320adc3101";
+            reg = <0x18>;
+            reset-gpios = <&gpio_pc 3 GPIO_ACTIVE_LOW>;
+            clocks = <&audio_mclk>;
+            gpio-controller;
+            #gpio-cells = <2>;
+            ti,dmdin-gpio1 = <ADC3XXX_GPIO_GPO>;
+            ti,micbias1-vg = <ADC3XXX_MICBIAS_AVDD>;
+        };
+    };
+
+    audio_mclk: clock {
+        compatible = "fixed-clock";
+        #clock-cells = <0>;
+        clock-frequency = <24576000>;
+    };
+...
diff --git a/dts/Bindings/sound/wlf,wm8903.yaml b/dts/Bindings/sound/wlf,wm8903.yaml
new file mode 100644
index 0000000000..7105ed5fd6
--- /dev/null
+++ b/dts/Bindings/sound/wlf,wm8903.yaml
@@ -0,0 +1,116 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/sound/wlf,wm8903.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: WM8903 audio codec
+
+description: |
+  This device supports I2C only.
+  Pins on the device (for linking into audio routes):
+      * IN1L
+      * IN1R
+      * IN2L
+      * IN2R
+      * IN3L
+      * IN3R
+      * DMICDAT
+      * HPOUTL
+      * HPOUTR
+      * LINEOUTL
+      * LINEOUTR
+      * LOP
+      * LON
+      * ROP
+      * RON
+      * MICBIAS
+
+maintainers:
+  - patches@opensource.cirrus.com
+
+properties:
+  compatible:
+    const: wlf,wm8903
+
+  reg:
+    maxItems: 1
+
+  gpio-controller: true
+  '#gpio-cells':
+    const: 2
+
+  interrupts:
+    maxItems: 1
+
+  micdet-cfg:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0
+    description: Default register value for R6 (Mic Bias).
+
+  micdet-delay:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 100
+    description: The debounce delay for microphone detection in mS.
+
+  gpio-cfg:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: |
+      minItems: 5
+      maxItems: 5
+      A list of GPIO configuration register values.
+      If absent, no configuration of these registers is performed.
+      If any entry has the value 0xffffffff, that GPIO's
+      configuration will not be modified.
+
+  AVDD-supply:
+    description: Analog power supply regulator on the AVDD pin.
+
+  CPVDD-supply:
+    description: Charge pump supply regulator on the CPVDD pin.
+
+  DBVDD-supply:
+    description: Digital buffer supply regulator for the DBVDD pin.
+
+  DCVDD-supply:
+    description: Digital core supply regulator for the DCVDD pin.
+
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - '#gpio-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      wm8903: codec@1a {
+        compatible = "wlf,wm8903";
+        reg = <0x1a>;
+        interrupts = <347>;
+
+        AVDD-supply = <&fooreg_a>;
+        CPVDD-supply = <&fooreg_b>;
+        DBVDD-supply = <&fooreg_c>;
+        DCVDD-supply = <&fooreg_d>;
+
+        gpio-controller;
+        #gpio-cells = <2>;
+
+        micdet-cfg = <0>;
+        micdet-delay = <100>;
+        gpio-cfg = <
+          0x0600 /* DMIC_LR, output */
+          0x0680 /* DMIC_DAT, input */
+          0x0000 /* GPIO, output, low */
+          0x0200 /* Interrupt, output */
+          0x01a0 /* BCLK, input, active high */
+        >;
+      };
+    };
diff --git a/dts/Bindings/sound/wm8903.txt b/dts/Bindings/sound/wm8903.txt
deleted file mode 100644
index 6371c2434a..0000000000
--- a/dts/Bindings/sound/wm8903.txt
+++ /dev/null
@@ -1,82 +0,0 @@
-WM8903 audio CODEC
-
-This device supports I2C only.
-
-Required properties:
-
-  - compatible : "wlf,wm8903"
-
-  - reg : the I2C address of the device.
-
-  - gpio-controller : Indicates this device is a GPIO controller.
-
-  - #gpio-cells : Should be two. The first cell is the pin number and the
-    second cell is used to specify optional parameters (currently unused).
-
-Optional properties:
-
-  - interrupts : The interrupt line the codec is connected to.
-
-  - micdet-cfg : Default register value for R6 (Mic Bias). If absent, the
-    default is 0.
-
-  - micdet-delay : The debounce delay for microphone detection in mS. If
-    absent, the default is 100.
-
-  - gpio-cfg : A list of GPIO configuration register values. The list must
-    be 5 entries long. If absent, no configuration of these registers is
-    performed. If any entry has the value 0xffffffff, that GPIO's
-    configuration will not be modified.
-
-  - AVDD-supply : Analog power supply regulator on the AVDD pin.
-
-  - CPVDD-supply : Charge pump supply regulator on the CPVDD pin.
-
-  - DBVDD-supply : Digital buffer supply regulator for the DBVDD pin.
-
-  - DCVDD-supply : Digital core supply regulator for the DCVDD pin.
-
-Pins on the device (for linking into audio routes):
-
-  * IN1L
-  * IN1R
-  * IN2L
-  * IN2R
-  * IN3L
-  * IN3R
-  * DMICDAT
-  * HPOUTL
-  * HPOUTR
-  * LINEOUTL
-  * LINEOUTR
-  * LOP
-  * LON
-  * ROP
-  * RON
-  * MICBIAS
-
-Example:
-
-wm8903: codec@1a {
-	compatible = "wlf,wm8903";
-	reg = <0x1a>;
-	interrupts = < 347 >;
-
-	AVDD-supply = <&fooreg_a>;
-	CPVDD-supply = <&fooreg_b>;
-	DBVDD-supply = <&fooreg_c>;
-	DCVDC-supply = <&fooreg_d>;
-
-	gpio-controller;
-	#gpio-cells = <2>;
-
-	micdet-cfg = <0>;
-	micdet-delay = <100>;
-	gpio-cfg = <
-		0x0600 /* DMIC_LR, output */
-		0x0680 /* DMIC_DAT, input */
-		0x0000 /* GPIO, output, low */
-		0x0200 /* Interrupt, output */
-		0x01a0 /* BCLK, input, active high */
-	>;
-};
diff --git a/dts/Bindings/spi/atmel,quadspi.yaml b/dts/Bindings/spi/atmel,quadspi.yaml
new file mode 100644
index 0000000000..1d493add40
--- /dev/null
+++ b/dts/Bindings/spi/atmel,quadspi.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/atmel,quadspi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel Quad Serial Peripheral Interface (QSPI)
+
+maintainers:
+  - Tudor Ambarus <tudor.ambarus@microchip.com>
+
+allOf:
+  - $ref: spi-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - atmel,sama5d2-qspi
+      - microchip,sam9x60-qspi
+      - microchip,sama7g5-qspi
+      - microchip,sama7g5-ospi
+
+  reg:
+    items:
+      - description: base registers
+      - description: mapped memory
+
+  reg-names:
+    items:
+      - const: qspi_base
+      - const: qspi_mmap
+
+  clocks:
+    minItems: 1
+    items:
+      - description: peripheral clock
+      - description: system clock or generic clock, if available
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: pclk
+      - enum: [ qspick, gclk ]
+
+  interrupts:
+    maxItems: 1
+
+  dmas:
+    items:
+      - description: tx DMA channel
+      - description: rx DMA channel
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - clocks
+  - clock-names
+  - '#address-cells'
+  - '#size-cells'
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/clock/at91.h>
+    spi@f0020000 {
+        compatible = "atmel,sama5d2-qspi";
+        reg = <0xf0020000 0x100>, <0xd0000000 0x8000000>;
+        reg-names = "qspi_base", "qspi_mmap";
+        interrupts = <52 IRQ_TYPE_LEVEL_HIGH 7>;
+        clocks = <&pmc PMC_TYPE_PERIPHERAL 52>;
+        clock-names = "pclk";
+        #address-cells = <1>;
+        #size-cells = <0>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_spi0_default>;
+
+        flash@0 {
+            compatible = "jedec,spi-nor";
+            spi-max-frequency = <50000000>;
+            reg = <0>;
+            spi-rx-bus-width = <4>;
+            spi-tx-bus-width = <4>;
+        };
+    };
diff --git a/dts/Bindings/spi/atmel-quadspi.txt b/dts/Bindings/spi/atmel-quadspi.txt
deleted file mode 100644
index 7c40ea6943..0000000000
--- a/dts/Bindings/spi/atmel-quadspi.txt
+++ /dev/null
@@ -1,37 +0,0 @@
-* Atmel Quad Serial Peripheral Interface (QSPI)
-
-Required properties:
-- compatible:     Should be one of the following:
-		  - "atmel,sama5d2-qspi"
-		  - "microchip,sam9x60-qspi"
-- reg:            Should contain the locations and lengths of the base registers
-                  and the mapped memory.
-- reg-names:      Should contain the resource reg names:
-                  - qspi_base: configuration register address space
-                  - qspi_mmap: memory mapped address space
-- interrupts:     Should contain the interrupt for the device.
-- clocks:         Should reference the peripheral clock and the QSPI system
-                  clock if available.
-- clock-names:    Should contain "pclk" for the peripheral clock and "qspick"
-                  for the system clock when available.
-- #address-cells: Should be <1>.
-- #size-cells:    Should be <0>.
-
-Example:
-
-spi@f0020000 {
-	compatible = "atmel,sama5d2-qspi";
-	reg = <0xf0020000 0x100>, <0xd0000000 0x8000000>;
-	reg-names = "qspi_base", "qspi_mmap";
-	interrupts = <52 IRQ_TYPE_LEVEL_HIGH 7>;
-	clocks = <&pmc PMC_TYPE_PERIPHERAL 52>;
-	clock-names = "pclk";
-	#address-cells = <1>;
-	#size-cells = <0>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spi0_default>;
-
-	m25p80@0 {
-		...
-	};
-};
diff --git a/dts/Bindings/spi/cdns,qspi-nor-peripheral-props.yaml b/dts/Bindings/spi/cdns,qspi-nor-peripheral-props.yaml
new file mode 100644
index 0000000000..553601a441
--- /dev/null
+++ b/dts/Bindings/spi/cdns,qspi-nor-peripheral-props.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/cdns,qspi-nor-peripheral-props.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Peripheral-specific properties for the Cadence QSPI controller.
+
+description:
+  See spi-peripheral-props.yaml for more info.
+
+maintainers:
+  - Pratyush Yadav <p.yadav@ti.com>
+
+properties:
+  # cdns,qspi-nor.yaml
+  cdns,read-delay:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Delay for read capture logic, in clock cycles.
+
+  cdns,tshsl-ns:
+    description:
+      Delay in nanoseconds for the length that the master mode chip select
+      outputs are de-asserted between transactions.
+
+  cdns,tsd2d-ns:
+    description:
+      Delay in nanoseconds between one chip select being de-activated
+      and the activation of another.
+
+  cdns,tchsh-ns:
+    description:
+      Delay in nanoseconds between last bit of current transaction and
+      deasserting the device chip select (qspi_n_ss_out).
+
+  cdns,tslch-ns:
+    description:
+      Delay in nanoseconds between setting qspi_n_ss_out low and
+      first bit transfer.
+
+additionalProperties: true
diff --git a/dts/Bindings/spi/cdns,qspi-nor.yaml b/dts/Bindings/spi/cdns,qspi-nor.yaml
index 037f41f585..0a537fa3a6 100644
--- a/dts/Bindings/spi/cdns,qspi-nor.yaml
+++ b/dts/Bindings/spi/cdns,qspi-nor.yaml
@@ -87,39 +87,6 @@ properties:
     items:
       enum: [ qspi, qspi-ocp ]
 
-# subnode's properties
-patternProperties:
-  "@[0-9a-f]+$":
-    type: object
-    description:
-      Flash device uses the below defined properties in the subnode.
-
-    properties:
-      cdns,read-delay:
-        $ref: /schemas/types.yaml#/definitions/uint32
-        description:
-          Delay for read capture logic, in clock cycles.
-
-      cdns,tshsl-ns:
-        description:
-          Delay in nanoseconds for the length that the master mode chip select
-          outputs are de-asserted between transactions.
-
-      cdns,tsd2d-ns:
-        description:
-          Delay in nanoseconds between one chip select being de-activated
-          and the activation of another.
-
-      cdns,tchsh-ns:
-        description:
-          Delay in nanoseconds between last bit of current transaction and
-          deasserting the device chip select (qspi_n_ss_out).
-
-      cdns,tslch-ns:
-        description:
-          Delay in nanoseconds between setting qspi_n_ss_out low and
-          first bit transfer.
-
 required:
   - compatible
   - reg
diff --git a/dts/Bindings/spi/mediatek,spi-mtk-nor.yaml b/dts/Bindings/spi/mediatek,spi-mtk-nor.yaml
index 7393f30535..4e4694e3d5 100644
--- a/dts/Bindings/spi/mediatek,spi-mtk-nor.yaml
+++ b/dts/Bindings/spi/mediatek,spi-mtk-nor.yaml
@@ -43,14 +43,19 @@ properties:
     maxItems: 1
 
   clocks:
+    minItems: 2
     items:
       - description: clock used for spi bus
       - description: clock used for controller
+      - description: clock used for nor dma bus. this depends on hardware
+                     design, so this is optional.
 
   clock-names:
+    minItems: 2
     items:
       - const: spi
       - const: sf
+      - const: axi
 
 required:
   - compatible
@@ -72,7 +77,7 @@ examples:
       nor_flash: spi@1100d000 {
         compatible = "mediatek,mt8173-nor";
         reg = <0 0x1100d000 0 0xe0>;
-        interrupts = <&spi_flash_irq>;
+        interrupts = <1>;
         clocks = <&pericfg CLK_PERI_SPI>, <&topckgen CLK_TOP_SPINFI_IFR_SEL>;
         clock-names = "spi", "sf";
         #address-cells = <1>;
@@ -84,4 +89,3 @@ examples:
         };
       };
     };
-
diff --git a/dts/Bindings/spi/renesas,rspi.yaml b/dts/Bindings/spi/renesas,rspi.yaml
index 8397f60d80..76e6d9e52f 100644
--- a/dts/Bindings/spi/renesas,rspi.yaml
+++ b/dts/Bindings/spi/renesas,rspi.yaml
@@ -21,7 +21,8 @@ properties:
           - enum:
               - renesas,rspi-r7s72100  # RZ/A1H
               - renesas,rspi-r7s9210   # RZ/A2
-          - const: renesas,rspi-rz     # RZ/A
+              - renesas,r9a07g044-rspi # RZ/G2{L,LC}
+          - const: renesas,rspi-rz     # RZ/A and RZ/G2{L,LC}
 
       - items:
           - enum:
@@ -122,6 +123,7 @@ allOf:
           contains:
             enum:
               - renesas,qspi
+              - renesas,r9a07g044-rspi
     then:
       required:
         - resets
diff --git a/dts/Bindings/spi/spi-controller.yaml b/dts/Bindings/spi/spi-controller.yaml
index 8246891602..36b72518f5 100644
--- a/dts/Bindings/spi/spi-controller.yaml
+++ b/dts/Bindings/spi/spi-controller.yaml
@@ -94,73 +94,8 @@ patternProperties:
   "^.*@[0-9a-f]+$":
     type: object
 
-    properties:
-      compatible:
-        description:
-          Compatible of the SPI device.
-
-      reg:
-        minItems: 1
-        maxItems: 256
-        items:
-          minimum: 0
-          maximum: 256
-        description:
-          Chip select used by the device.
-
-      spi-3wire:
-        $ref: /schemas/types.yaml#/definitions/flag
-        description:
-          The device requires 3-wire mode.
-
-      spi-cpha:
-        $ref: /schemas/types.yaml#/definitions/flag
-        description:
-          The device requires shifted clock phase (CPHA) mode.
-
-      spi-cpol:
-        $ref: /schemas/types.yaml#/definitions/flag
-        description:
-          The device requires inverse clock polarity (CPOL) mode.
-
-      spi-cs-high:
-        $ref: /schemas/types.yaml#/definitions/flag
-        description:
-          The device requires the chip select active high.
-
-      spi-lsb-first:
-        $ref: /schemas/types.yaml#/definitions/flag
-        description:
-          The device requires the LSB first mode.
-
-      spi-max-frequency:
-        $ref: /schemas/types.yaml#/definitions/uint32
-        description:
-          Maximum SPI clocking speed of the device in Hz.
-
-      spi-rx-bus-width:
-        description:
-          Bus width to the SPI bus used for read transfers.
-          If 0 is provided, then no RX will be possible on this device.
-        $ref: /schemas/types.yaml#/definitions/uint32
-        enum: [0, 1, 2, 4, 8]
-        default: 1
-
-      spi-rx-delay-us:
-        description:
-          Delay, in microseconds, after a read transfer.
-
-      spi-tx-bus-width:
-        description:
-          Bus width to the SPI bus used for write transfers.
-          If 0 is provided, then no TX will be possible on this device.
-        $ref: /schemas/types.yaml#/definitions/uint32
-        enum: [0, 1, 2, 4, 8]
-        default: 1
-
-      spi-tx-delay-us:
-        description:
-          Delay, in microseconds, after a write transfer.
+    allOf:
+      - $ref: spi-peripheral-props.yaml
 
     required:
       - compatible
diff --git a/dts/Bindings/spi/spi-fsl-lpspi.yaml b/dts/Bindings/spi/spi-fsl-lpspi.yaml
index 312d8fee9d..1d46877fe4 100644
--- a/dts/Bindings/spi/spi-fsl-lpspi.yaml
+++ b/dts/Bindings/spi/spi-fsl-lpspi.yaml
@@ -14,10 +14,13 @@ allOf:
 
 properties:
   compatible:
-    enum:
-      - fsl,imx7ulp-spi
-      - fsl,imx8qxp-spi
-
+    oneOf:
+      - enum:
+          - fsl,imx7ulp-spi
+          - fsl,imx8qxp-spi
+      - items:
+          - const: fsl,imx8ulp-spi
+          - const: fsl,imx7ulp-spi
   reg:
     maxItems: 1
 
diff --git a/dts/Bindings/spi/spi-mux.yaml b/dts/Bindings/spi/spi-mux.yaml
index 51c7622dc2..7ea79f6d33 100644
--- a/dts/Bindings/spi/spi-mux.yaml
+++ b/dts/Bindings/spi/spi-mux.yaml
@@ -31,6 +31,7 @@ description: |
 
 allOf:
   - $ref: "/schemas/spi/spi-controller.yaml#"
+  - $ref: "/schemas/spi/spi-peripheral-props.yaml#"
 
 maintainers:
   - Chris Packham <chris.packham@alliedtelesis.co.nz>
diff --git a/dts/Bindings/spi/spi-peripheral-props.yaml b/dts/Bindings/spi/spi-peripheral-props.yaml
new file mode 100644
index 0000000000..5dd209206e
--- /dev/null
+++ b/dts/Bindings/spi/spi-peripheral-props.yaml
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/spi-peripheral-props.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Peripheral-specific properties for a SPI bus.
+
+description:
+  Many SPI controllers need to add properties to peripheral devices. They could
+  be common properties like spi-max-frequency, spi-cpha, etc. or they could be
+  controller specific like delay in clock or data lines, etc. These properties
+  need to be defined in the peripheral node because they are per-peripheral and
+  there can be multiple peripherals attached to a controller. All those
+  properties are listed here. The controller specific properties should go in
+  their own separate schema that should be referenced from here.
+
+maintainers:
+  - Pratyush Yadav <p.yadav@ti.com>
+
+properties:
+  reg:
+    minItems: 1
+    maxItems: 256
+    items:
+      minimum: 0
+      maximum: 256
+    description:
+      Chip select used by the device.
+
+  spi-3wire:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      The device requires 3-wire mode.
+
+  spi-cpha:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      The device requires shifted clock phase (CPHA) mode.
+
+  spi-cpol:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      The device requires inverse clock polarity (CPOL) mode.
+
+  spi-cs-high:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      The device requires the chip select active high.
+
+  spi-lsb-first:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      The device requires the LSB first mode.
+
+  spi-max-frequency:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Maximum SPI clocking speed of the device in Hz.
+
+  spi-rx-bus-width:
+    description:
+      Bus width to the SPI bus used for read transfers.
+      If 0 is provided, then no RX will be possible on this device.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 4, 8]
+    default: 1
+
+  spi-rx-delay-us:
+    description:
+      Delay, in microseconds, after a read transfer.
+
+  spi-tx-bus-width:
+    description:
+      Bus width to the SPI bus used for write transfers.
+      If 0 is provided, then no TX will be possible on this device.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 4, 8]
+    default: 1
+
+  spi-tx-delay-us:
+    description:
+      Delay, in microseconds, after a write transfer.
+
+# The controller specific properties go here.
+allOf:
+  - $ref: cdns,qspi-nor-peripheral-props.yaml#
+
+additionalProperties: true
diff --git a/dts/Bindings/spi/spi-pl022.yaml b/dts/Bindings/spi/spi-pl022.yaml
index a91d868e40..6d633728fc 100644
--- a/dts/Bindings/spi/spi-pl022.yaml
+++ b/dts/Bindings/spi/spi-pl022.yaml
@@ -72,6 +72,9 @@ properties:
       - const: rx
       - const: tx
 
+  resets:
+    maxItems: 1
+
 patternProperties:
   "^[a-zA-Z][a-zA-Z0-9,+\\-._]{0,63}@[0-9a-f]+$":
     type: object
diff --git a/dts/Bindings/spmi/mtk,spmi-mtk-pmif.yaml b/dts/Bindings/spmi/mtk,spmi-mtk-pmif.yaml
new file mode 100644
index 0000000000..2445c5e0b0
--- /dev/null
+++ b/dts/Bindings/spmi/mtk,spmi-mtk-pmif.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spmi/mtk,spmi-mtk-pmif.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek SPMI Controller Device Tree Bindings
+
+maintainers:
+  - Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
+
+description: |+
+  On MediaTek SoCs the PMIC is connected via SPMI and the controller allows
+  for multiple SoCs to control a single SPMI master.
+
+allOf:
+  - $ref: "spmi.yaml"
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt6873-spmi
+      - mediatek,mt8195-spmi
+
+  reg:
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: pmif
+      - const: spmimst
+
+  clocks:
+    minItems: 3
+    maxItems: 3
+
+  clock-names:
+    items:
+      - const: pmif_sys_ck
+      - const: pmif_tmr_ck
+      - const: spmimst_clk_mux
+
+  assigned-clocks:
+    maxItems: 1
+
+  assigned-clock-parents:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8192-clk.h>
+
+    spmi: spmi@10027000 {
+        compatible = "mediatek,mt6873-spmi";
+        reg = <0x10027000 0xe00>,
+              <0x10029000 0x100>;
+        reg-names = "pmif", "spmimst";
+        clocks = <&infracfg CLK_INFRA_PMIC_AP>,
+                 <&infracfg CLK_INFRA_PMIC_TMR>,
+                 <&topckgen CLK_TOP_SPMI_MST_SEL>;
+        clock-names = "pmif_sys_ck",
+                      "pmif_tmr_ck",
+                      "spmimst_clk_mux";
+        assigned-clocks = <&topckgen CLK_TOP_PWRAP_ULPOSC_SEL>;
+        assigned-clock-parents = <&topckgen CLK_TOP_OSC_D10>;
+    };
+...
diff --git a/dts/Bindings/spmi/spmi.yaml b/dts/Bindings/spmi/spmi.yaml
index 1d243faef2..c1b06fa5c6 100644
--- a/dts/Bindings/spmi/spmi.yaml
+++ b/dts/Bindings/spmi/spmi.yaml
@@ -24,9 +24,6 @@ properties:
   $nodename:
     pattern: "^spmi@.*"
 
-  reg:
-    maxItems: 1
-
   "#address-cells":
     const: 2
 
diff --git a/dts/Bindings/sram/sram.yaml b/dts/Bindings/sram/sram.yaml
index d4e418b6a1..668a9a41a7 100644
--- a/dts/Bindings/sram/sram.yaml
+++ b/dts/Bindings/sram/sram.yaml
@@ -31,6 +31,9 @@ properties:
         - amlogic,meson-gxbb-sram
         - arm,juno-sram-ns
         - atmel,sama5d2-securam
+        - nvidia,tegra186-sysram
+        - nvidia,tegra194-sysram
+        - nvidia,tegra234-sysram
         - qcom,rpm-msg-ram
         - rockchip,rk3288-pmu-sram
 
diff --git a/dts/Bindings/thermal/brcm,avs-tmon.txt b/dts/Bindings/thermal/brcm,avs-tmon.txt
deleted file mode 100644
index 74a9ef09db..0000000000
--- a/dts/Bindings/thermal/brcm,avs-tmon.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-* Broadcom STB thermal management
-
-Thermal management core, provided by the AVS TMON hardware block.
-
-Required properties:
-- compatible: must be one of:
-	"brcm,avs-tmon-bcm7216"
-	"brcm,avs-tmon-bcm7445"
-	"brcm,avs-tmon"
-- reg: address range for the AVS TMON registers
-- interrupts: temperature monitor interrupt, for high/low threshold triggers,
-	      required except for "brcm,avs-tmon-bcm7216"
-- interrupt-names: should be "tmon"
-
-Example:
-
-	thermal@f04d1500 {
-		compatible = "brcm,avs-tmon-bcm7445", "brcm,avs-tmon";
-		reg = <0xf04d1500 0x28>;
-		interrupts = <0x6>;
-		interrupt-names = "tmon";
-		interrupt-parent = <&avs_host_l2_intc>;
-	};
diff --git a/dts/Bindings/thermal/brcm,avs-tmon.yaml b/dts/Bindings/thermal/brcm,avs-tmon.yaml
new file mode 100644
index 0000000000..267a0f4235
--- /dev/null
+++ b/dts/Bindings/thermal/brcm,avs-tmon.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/brcm,avs-tmon.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom STB thermal management
+
+description: Thermal management core, provided by the AVS TMON hardware block.
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+allOf:
+  - $ref: thermal-sensor.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - brcm,avs-tmon-bcm7216
+          - brcm,avs-tmon-bcm7445
+      - const: brcm,avs-tmon
+
+  reg:
+    maxItems: 1
+    description: >
+      Address range for the AVS TMON registers
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-names:
+    items:
+      - const: tmon
+
+  "#thermal-sensor-cells":
+    const: 0
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - "#thermal-sensor-cells"
+
+examples:
+  - |
+     thermal@f04d1500 {
+          compatible = "brcm,avs-tmon-bcm7445", "brcm,avs-tmon";
+          reg = <0xf04d1500 0x28>;
+          interrupts = <0x6>;
+          interrupt-names = "tmon";
+          interrupt-parent = <&avs_host_l2_intc>;
+          #thermal-sensor-cells = <0>;
+     };
diff --git a/dts/Bindings/thermal/nvidia,tegra186-bpmp-thermal.txt b/dts/Bindings/thermal/nvidia,tegra186-bpmp-thermal.txt
deleted file mode 100644
index fc87f6aa1b..0000000000
--- a/dts/Bindings/thermal/nvidia,tegra186-bpmp-thermal.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-NVIDIA Tegra186 BPMP thermal sensor
-
-In Tegra186, the BPMP (Boot and Power Management Processor) implements an
-interface that is used to read system temperatures, including CPU cluster
-and GPU temperatures. This binding describes the thermal sensor that is
-exposed by BPMP.
-
-The BPMP thermal node must be located directly inside the main BPMP node. See
-../firmware/nvidia,tegra186-bpmp.txt for details of the BPMP binding.
-
-This node represents a thermal sensor. See Documentation/devicetree/bindings/thermal/thermal-sensor.yaml for details of the
-core thermal binding.
-
-Required properties:
-- compatible:
-    Array of strings.
-    One of:
-    - "nvidia,tegra186-bpmp-thermal"
-    - "nvidia,tegra194-bpmp-thermal"
-- #thermal-sensor-cells: Cell for sensor index.
-    Single-cell integer.
-    Must be <1>.
-
-Example:
-
-bpmp {
-	...
-
-	bpmp_thermal: thermal {
-		compatible = "nvidia,tegra186-bpmp-thermal";
-		#thermal-sensor-cells = <1>;
-	};
-};
diff --git a/dts/Bindings/thermal/nvidia,tegra186-bpmp-thermal.yaml b/dts/Bindings/thermal/nvidia,tegra186-bpmp-thermal.yaml
new file mode 100644
index 0000000000..c91fd07e40
--- /dev/null
+++ b/dts/Bindings/thermal/nvidia,tegra186-bpmp-thermal.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/nvidia,tegra186-bpmp-thermal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra186 (and later) BPMP thermal sensor
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+description: |
+  In Tegra186, the BPMP (Boot and Power Management Processor) implements
+  an interface that is used to read system temperatures, including CPU
+  cluster and GPU temperatures. This binding describes the thermal
+  sensor that is exposed by BPMP.
+
+  The BPMP thermal node must be located directly inside the main BPMP
+  node. See ../firmware/nvidia,tegra186-bpmp.yaml for details of the
+  BPMP binding.
+
+  This node represents a thermal sensor. See
+
+    Documentation/devicetree/bindings/thermal/thermal-sensor.yaml
+
+  for details of the core thermal binding.
+
+properties:
+  compatible:
+    enum:
+      - nvidia,tegra186-bpmp-thermal
+      - nvidia,tegra194-bpmp-thermal
+
+  '#thermal-sensor-cells':
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Number of cells needed in the phandle specifier to
+      identify a given sensor. Must be 1 and the single cell specifies
+      the sensor index.
+    const: 1
+
+additionalProperties: false
diff --git a/dts/Bindings/thermal/rzg2l-thermal.yaml b/dts/Bindings/thermal/rzg2l-thermal.yaml
new file mode 100644
index 0000000000..ccab9511a0
--- /dev/null
+++ b/dts/Bindings/thermal/rzg2l-thermal.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/rzg2l-thermal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/G2L Thermal Sensor Unit
+
+description:
+  On RZ/G2L SoCs, the thermal sensor unit (TSU) measures the
+  temperature(Tj) inside the LSI.
+
+maintainers:
+  - Biju Das <biju.das.jz@bp.renesas.com>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,r9a07g044-tsu # RZ/G2{L,LC}
+      - const: renesas,rzg2l-tsu
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  "#thermal-sensor-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - power-domains
+  - resets
+  - "#thermal-sensor-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r9a07g044-cpg.h>
+
+    tsu: thermal@10059400 {
+            compatible = "renesas,r9a07g044-tsu",
+                         "renesas,rzg2l-tsu";
+            reg = <0x10059400 0x400>;
+            clocks = <&cpg CPG_MOD R9A07G044_TSU_PCLK>;
+            resets = <&cpg R9A07G044_TSU_PRESETN>;
+            power-domains = <&cpg>;
+            #thermal-sensor-cells = <1>;
+    };
+
+    thermal-zones {
+            cpu-thermal {
+                    polling-delay-passive = <250>;
+                    polling-delay = <1000>;
+                    thermal-sensors = <&tsu 0>;
+
+                    trips {
+                            sensor_crit: sensor-crit {
+                                    temperature = <125000>;
+                                    hysteresis = <1000>;
+                                    type = "critical";
+                            };
+                    };
+            };
+    };
diff --git a/dts/Bindings/thermal/thermal-zones.yaml b/dts/Bindings/thermal/thermal-zones.yaml
index a07de5ed0c..2d34f3ccb2 100644
--- a/dts/Bindings/thermal/thermal-zones.yaml
+++ b/dts/Bindings/thermal/thermal-zones.yaml
@@ -199,12 +199,11 @@ patternProperties:
 
               contribution:
                 $ref: /schemas/types.yaml#/definitions/uint32
-                minimum: 0
-                maximum: 100
                 description:
-                  The percentage contribution of the cooling devices at the
-                  specific trip temperature referenced in this map
-                  to this thermal zone
+                  The cooling contribution to the thermal zone of the referred
+                  cooling device at the referred trip point. The contribution is
+                  a ratio of the sum of all cooling contributions within a
+                  thermal zone.
 
             required:
               - trip
diff --git a/dts/Bindings/timer/cdns,ttc.yaml b/dts/Bindings/timer/cdns,ttc.yaml
index 8615353f69..c3386076a9 100644
--- a/dts/Bindings/timer/cdns,ttc.yaml
+++ b/dts/Bindings/timer/cdns,ttc.yaml
@@ -25,6 +25,9 @@ properties:
   clocks:
     maxItems: 1
 
+  power-domains:
+    maxItems: 1
+
   timer-width:
     $ref: "/schemas/types.yaml#/definitions/uint32"
     description: |
diff --git a/dts/Bindings/timer/mstar,msc313e-timer.yaml b/dts/Bindings/timer/mstar,msc313e-timer.yaml
new file mode 100644
index 0000000000..03d5dba5d5
--- /dev/null
+++ b/dts/Bindings/timer/mstar,msc313e-timer.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/mstar,msc313e-timer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mstar MSC313e Timer Device Tree Bindings
+
+maintainers:
+  - Daniel Palmer <daniel@0x0f.com>
+  - Romain Perier <romain.perier@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - mstar,msc313e-timer
+      - sstar,ssd20xd-timer
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    timer@6040 {
+        compatible = "mstar,msc313e-timer";
+        reg = <0x6040 0x40>;
+        clocks = <&xtal_div2>;
+        interrupts-extended = <&intc_fiq GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+    };
+...
diff --git a/dts/Bindings/timer/nxp,tpm-timer.yaml b/dts/Bindings/timer/nxp,tpm-timer.yaml
index edd9585f67..f69773a8e4 100644
--- a/dts/Bindings/timer/nxp,tpm-timer.yaml
+++ b/dts/Bindings/timer/nxp,tpm-timer.yaml
@@ -19,7 +19,11 @@ description: |
 
 properties:
   compatible:
-    const: fsl,imx7ulp-tpm
+    oneOf:
+      - const: fsl,imx7ulp-tpm
+      - items:
+          - const: fsl,imx8ulp-tpm
+          - const: fsl,imx7ulp-tpm
 
   reg:
     maxItems: 1
diff --git a/dts/Bindings/timer/renesas,ostm.yaml b/dts/Bindings/timer/renesas,ostm.yaml
index 600d47ab7d..7fa7f977b4 100644
--- a/dts/Bindings/timer/renesas,ostm.yaml
+++ b/dts/Bindings/timer/renesas,ostm.yaml
@@ -21,9 +21,10 @@ properties:
   compatible:
     items:
       - enum:
-          - renesas,r7s72100-ostm # RZ/A1H
-          - renesas,r7s9210-ostm  # RZ/A2M
-      - const: renesas,ostm       # Generic
+          - renesas,r7s72100-ostm  # RZ/A1H
+          - renesas,r7s9210-ostm   # RZ/A2M
+          - renesas,r9a07g044-ostm # RZ/G2{L,LC}
+      - const: renesas,ostm        # Generic
 
   reg:
     maxItems: 1
@@ -37,6 +38,9 @@ properties:
   power-domains:
     maxItems: 1
 
+  resets:
+    maxItems: 1
+
 required:
   - compatible
   - reg
@@ -44,6 +48,16 @@ required:
   - clocks
   - power-domains
 
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - renesas,r9a07g044-ostm
+then:
+  required:
+    - resets
+
 additionalProperties: false
 
 examples:
diff --git a/dts/Bindings/timer/rockchip,rk-timer.yaml b/dts/Bindings/timer/rockchip,rk-timer.yaml
index e26ecb5893..5d157d87da 100644
--- a/dts/Bindings/timer/rockchip,rk-timer.yaml
+++ b/dts/Bindings/timer/rockchip,rk-timer.yaml
@@ -18,7 +18,6 @@ properties:
           - enum:
               - rockchip,rv1108-timer
               - rockchip,rk3036-timer
-              - rockchip,rk3066-timer
               - rockchip,rk3188-timer
               - rockchip,rk3228-timer
               - rockchip,rk3229-timer
diff --git a/dts/Bindings/timer/sifive,clint.yaml b/dts/Bindings/timer/sifive,clint.yaml
index a35952f487..8d5f4687ad 100644
--- a/dts/Bindings/timer/sifive,clint.yaml
+++ b/dts/Bindings/timer/sifive,clint.yaml
@@ -25,6 +25,7 @@ properties:
     items:
       - enum:
           - sifive,fu540-c000-clint
+          - starfive,jh7100-clint
           - canaan,k210-clint
       - const: sifive,clint0
 
diff --git a/dts/Bindings/trivial-devices.yaml b/dts/Bindings/trivial-devices.yaml
index 791079021f..091792ba99 100644
--- a/dts/Bindings/trivial-devices.yaml
+++ b/dts/Bindings/trivial-devices.yaml
@@ -31,7 +31,7 @@ properties:
       - enum:
             # SMBus/I2C Digital Temperature Sensor in 6-Pin SOT with SMBus Alert and Over Temperature Pin
           - ad,ad7414
-            # ADM9240:  Complete System Hardware Monitor for uProcessor-Based Systems
+            # ADM9240: Complete System Hardware Monitor for uProcessor-Based Systems
           - ad,adm9240
             # AD5110 - Nonvolatile Digital Potentiometer
           - adi,ad5110
@@ -43,7 +43,7 @@ properties:
           - adi,adp5589
             # AMS iAQ-Core VOC Sensor
           - ams,iaq-core
-            # i2c serial eeprom  (24cxx)
+            # i2c serial eeprom (24cxx)
           - at,24c08
             # i2c trusted platform module (TPM)
           - atmel,at97sc3204t
@@ -73,6 +73,8 @@ properties:
           - dallas,ds4510
             # Digital Thermometer and Thermostat
           - dallas,ds75
+            # Delta AHE-50DC Open19 power shelf fan control module
+          - delta,ahe50dc-fan
             # Delta Electronics DPS-650-AB power supply
           - delta,dps650ab
           # Delta Electronics DPS920AB 920W 54V Power Supply
@@ -121,8 +123,14 @@ properties:
           - ibm,cffps2
             # Infineon IR36021 digital POL buck controller
           - infineon,ir36021
+          # Infineon IR38060 Voltage Regulator
+          - infineon,ir38060
             # Infineon IR38064 Voltage Regulator
           - infineon,ir38064
+          # Infineon IR38164 Voltage Regulator
+          - infineon,ir38164
+          # Infineon IR38263 Voltage Regulator
+          - infineon,ir38263
             # Infineon SLB9635 (Soft-) I2C TPM (old protocol, max 100khz)
           - infineon,slb9635tt
             # Infineon SLB9645 I2C TPM (new protocol, max 400khz)
@@ -281,6 +289,8 @@ properties:
           - sensirion,sgp30
             # Sensirion gas sensor with I2C interface
           - sensirion,sgp40
+            # Sensirion temperature & humidity sensor with I2C interface
+          - sensirion,sht4x
             # Sensortek 3 axis accelerometer
           - sensortek,stk8312
             # Sensortek 3 axis accelerometer
@@ -293,9 +303,9 @@ properties:
           - skyworks,sky81452
             # Socionext SynQuacer TPM MMIO module
           - socionext,synquacer-tpm-mmio
-            # i2c serial eeprom  (24cxx)
-          - sparkfun,qwiic-joystick
             # SparkFun Qwiic Joystick (COM-15168) with i2c interface
+          - sparkfun,qwiic-joystick
+            # i2c serial eeprom (24cxx)
           - st,24c256
             # Ambient Light Sensor with SMBUS/Two Wire Serial Interface
           - taos,tsl2550
@@ -329,12 +339,19 @@ properties:
           - ti,tmp122
             # Digital Temperature Sensor
           - ti,tmp275
+            # TI DC-DC converter on PMBus
+          - ti,tps40400
             # TI Dual channel DCAP+ multiphase controller TPS53676 with AVSBus
           - ti,tps53676
             # TI Dual channel DCAP+ multiphase controller TPS53679
           - ti,tps53679
             # TI Dual channel DCAP+ multiphase controller TPS53688
           - ti,tps53688
+            # TI DC-DC converters on PMBus
+          - ti,tps544b20
+          - ti,tps544b25
+          - ti,tps544c20
+          - ti,tps544c25
             # Winbond/Nuvoton H/W Monitor
           - winbond,w83793
             # i2c trusted platform module (TPM)
diff --git a/dts/Bindings/ufs/ufshcd-pltfrm.txt b/dts/Bindings/ufs/ufshcd-pltfrm.txt
index d8fd4df817..d0fee78e62 100644
--- a/dts/Bindings/ufs/ufshcd-pltfrm.txt
+++ b/dts/Bindings/ufs/ufshcd-pltfrm.txt
@@ -16,6 +16,7 @@ Required properties:
 			    "qcom,sm8150-ufshc", "qcom,ufshc", "jedec,ufs-2.0"
 			    "qcom,sm8250-ufshc", "qcom,ufshc", "jedec,ufs-2.0"
 			    "qcom,sm8350-ufshc", "qcom,ufshc", "jedec,ufs-2.0"
+			    "qcom,sm8450-ufshc", "qcom,ufshc", "jedec,ufs-2.0"
 - interrupts        : <interrupt mapping for UFS host controller IRQ>
 - reg               : <registers mapping>
 
diff --git a/dts/Bindings/usb/brcm,bdc.txt b/dts/Bindings/usb/brcm,bdc.txt
deleted file mode 100644
index c9f52b97ce..0000000000
--- a/dts/Bindings/usb/brcm,bdc.txt
+++ /dev/null
@@ -1,29 +0,0 @@
-Broadcom USB Device Controller (BDC)
-====================================
-
-Required properties:
-
-- compatible: must be one of:
-                "brcm,bdc-udc-v2"
-                "brcm,bdc"
-- reg: the base register address and length
-- interrupts: the interrupt line for this controller
-
-Optional properties:
-
-On Broadcom STB platforms, these properties are required:
-
-- phys: phandle to one or two USB PHY blocks
-        NOTE: Some SoC's have a single phy and some have
-        USB 2.0 and USB 3.0 phys
-- clocks: phandle to the functional clock of this block
-
-Example:
-
-        bdc@f0b02000 {
-                compatible = "brcm,bdc-udc-v2";
-                reg = <0xf0b02000 0xfc4>;
-                interrupts = <0x0 0x60 0x0>;
-                phys = <&usbphy_0 0x0>;
-                clocks = <&sw_usbd>;
-        };
diff --git a/dts/Bindings/usb/brcm,bdc.yaml b/dts/Bindings/usb/brcm,bdc.yaml
new file mode 100644
index 0000000000..9e561fee98
--- /dev/null
+++ b/dts/Bindings/usb/brcm,bdc.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/brcm,bdc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom USB Device Controller (BDC)
+
+maintainers:
+  - Al Cooper <alcooperx@gmail.com>
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - brcm,bdc-udc-v2
+          - brcm,bdc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  phys:
+    minItems: 1
+    items:
+      - description: USB 2.0 or 3.0 PHY
+      - description: USB 3.0 PHY if there is a dedicated 2.0 PHY
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+        usb@f0b02000 {
+                compatible = "brcm,bdc-udc-v2";
+                reg = <0xf0b02000 0xfc4>;
+                interrupts = <0x0 0x60 0x0>;
+                phys = <&usbphy_0 0x0>;
+                clocks = <&sw_usbd>;
+        };
diff --git a/dts/Bindings/usb/dwc2.yaml b/dts/Bindings/usb/dwc2.yaml
index 56a818478c..f00867ebc1 100644
--- a/dts/Bindings/usb/dwc2.yaml
+++ b/dts/Bindings/usb/dwc2.yaml
@@ -114,6 +114,8 @@ properties:
 
   usb-role-switch: true
 
+  role-switch-default-mode: true
+
   g-rx-fifo-size:
     $ref: /schemas/types.yaml#/definitions/uint32
     description: size of rx fifo size in gadget mode.
@@ -136,6 +138,17 @@ properties:
     description: If present indicates that we need to reset the PHY when we 
       detect a wakeup. This is due to a hardware errata.
 
+  port:
+    description:
+      Any connector to the data bus of this controller should be modelled
+      using the OF graph bindings specified, if the "usb-role-switch"
+      property is used.
+    $ref: /schemas/graph.yaml#/properties/port
+
+dependencies:
+  port: [ usb-role-switch ]
+  role-switch-default-mode: [ usb-role-switch ]
+
 required:
   - compatible
   - reg
diff --git a/dts/Bindings/usb/dwc3-xilinx.txt b/dts/Bindings/usb/dwc3-xilinx.txt
deleted file mode 100644
index 04813a46e5..0000000000
--- a/dts/Bindings/usb/dwc3-xilinx.txt
+++ /dev/null
@@ -1,56 +0,0 @@
-Xilinx SuperSpeed DWC3 USB SoC controller
-
-Required properties:
-- compatible:	May contain "xlnx,zynqmp-dwc3" or "xlnx,versal-dwc3"
-- reg:		Base address and length of the register control block
-- clocks:	A list of phandles for the clocks listed in clock-names
-- clock-names:	Should contain the following:
-  "bus_clk"	 Master/Core clock, have to be >= 125 MHz for SS
-		 operation and >= 60MHz for HS operation
-
-  "ref_clk"	 Clock source to core during PHY power down
-- resets:	A list of phandles for resets listed in reset-names
-- reset-names:
-  "usb_crst"	 USB core reset
-  "usb_hibrst"	 USB hibernation reset
-  "usb_apbrst"	 USB APB reset
-
-Required child node:
-A child node must exist to represent the core DWC3 IP block. The name of
-the node is not important. The content of the node is defined in dwc3.txt.
-
-Optional properties for snps,dwc3:
-- dma-coherent:	Enable this flag if CCI is enabled in design. Adding this
-		flag configures Global SoC bus Configuration Register and
-		Xilinx USB 3.0 IP - USB coherency register to enable CCI.
-- interrupt-names: Should contain the following:
-  "dwc_usb3"	USB gadget mode interrupts
-  "otg"		USB OTG mode interrupts
-  "hiber"	USB hibernation interrupts
-
-Example device node:
-
-		usb@0 {
-			#address-cells = <0x2>;
-			#size-cells = <0x1>;
-			compatible = "xlnx,zynqmp-dwc3";
-			reg = <0x0 0xff9d0000 0x0 0x100>;
-			clock-names = "bus_clk", "ref_clk";
-			clocks = <&clk125>, <&clk125>;
-			resets = <&zynqmp_reset ZYNQMP_RESET_USB1_CORERESET>,
-				 <&zynqmp_reset ZYNQMP_RESET_USB1_HIBERRESET>,
-				 <&zynqmp_reset ZYNQMP_RESET_USB1_APB>;
-			reset-names = "usb_crst", "usb_hibrst", "usb_apbrst";
-			ranges;
-
-			dwc3@fe200000 {
-				compatible = "snps,dwc3";
-				reg = <0x0 0xfe200000 0x40000>;
-				interrupt-names = "dwc_usb3", "otg", "hiber";
-				interrupts = <0 65 4>, <0 69 4>, <0 75 4>;
-				phys = <&psgtr 2 PHY_TYPE_USB3 0 2>;
-				phy-names = "usb3-phy";
-				dr_mode = "host";
-				dma-coherent;
-			};
-		};
diff --git a/dts/Bindings/usb/dwc3-xilinx.yaml b/dts/Bindings/usb/dwc3-xilinx.yaml
new file mode 100644
index 0000000000..f77c16e203
--- /dev/null
+++ b/dts/Bindings/usb/dwc3-xilinx.yaml
@@ -0,0 +1,131 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/dwc3-xilinx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx SuperSpeed DWC3 USB SoC controller
+
+maintainers:
+  - Manish Narani <manish.narani@xilinx.com>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - xlnx,zynqmp-dwc3
+          - xlnx,versal-dwc3
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    enum: [ 1, 2 ]
+
+  "#size-cells":
+    enum: [ 1, 2 ]
+
+  ranges: true
+
+  power-domains:
+    description: specifies a phandle to PM domain provider node
+    maxItems: 1
+
+  clocks:
+    description:
+      A list of phandle and clock-specifier pairs for the clocks
+      listed in clock-names.
+    items:
+      - description: Master/Core clock, has to be >= 125 MHz
+          for SS operation and >= 60MHz for HS operation.
+      - description: Clock source to core during PHY power down.
+
+  clock-names:
+    items:
+      - const: bus_clk
+      - const: ref_clk
+
+  resets:
+    description:
+      A list of phandles for resets listed in reset-names.
+
+    items:
+      - description: USB core reset
+      - description: USB hibernation reset
+      - description: USB APB reset
+
+  reset-names:
+    items:
+      - const: usb_crst
+      - const: usb_hibrst
+      - const: usb_apbrst
+
+  phys:
+    minItems: 1
+    maxItems: 2
+
+  phy-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      enum:
+        - usb2-phy
+        - usb3-phy
+
+# Required child node:
+
+patternProperties:
+  "^usb@[0-9a-f]+$":
+    $ref: snps,dwc3.yaml#
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+  - power-domains
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/dma/xlnx-zynqmp-dpdma.h>
+    #include <dt-bindings/power/xlnx-zynqmp-power.h>
+    #include <dt-bindings/reset/xlnx-zynqmp-resets.h>
+    #include <dt-bindings/clock/xlnx-zynqmp-clk.h>
+    #include <dt-bindings/reset/xlnx-zynqmp-resets.h>
+    #include <dt-bindings/phy/phy.h>
+    axi {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        usb@0 {
+            #address-cells = <0x2>;
+            #size-cells = <0x2>;
+            compatible = "xlnx,zynqmp-dwc3";
+            reg = <0x0 0xff9d0000 0x0 0x100>;
+            clocks = <&zynqmp_clk USB0_BUS_REF>, <&zynqmp_clk USB3_DUAL_REF>;
+            clock-names = "bus_clk", "ref_clk";
+            power-domains = <&zynqmp_firmware PD_USB_0>;
+            resets = <&zynqmp_reset ZYNQMP_RESET_USB1_CORERESET>,
+                     <&zynqmp_reset ZYNQMP_RESET_USB1_HIBERRESET>,
+                     <&zynqmp_reset ZYNQMP_RESET_USB1_APB>;
+            reset-names = "usb_crst", "usb_hibrst", "usb_apbrst";
+            phys = <&psgtr 2 PHY_TYPE_USB3 0 2>;
+            phy-names = "usb3-phy";
+            ranges;
+
+            usb@fe200000 {
+                compatible = "snps,dwc3";
+                reg = <0x0 0xfe200000 0x0 0x40000>;
+                interrupt-names = "host", "otg";
+                interrupts = <0 65 4>, <0 69 4>;
+                dr_mode = "host";
+                dma-coherent;
+            };
+        };
+    };
diff --git a/dts/Bindings/usb/intel,keembay-dwc3.yaml b/dts/Bindings/usb/intel,keembay-dwc3.yaml
index 43b91ab620..d3511f48cd 100644
--- a/dts/Bindings/usb/intel,keembay-dwc3.yaml
+++ b/dts/Bindings/usb/intel,keembay-dwc3.yaml
@@ -13,6 +13,9 @@ properties:
   compatible:
     const: intel,keembay-dwc3
 
+  reg:
+    maxItems: 1
+
   clocks:
     maxItems: 4
 
diff --git a/dts/Bindings/usb/nvidia,tegra-xudc.yaml b/dts/Bindings/usb/nvidia,tegra-xudc.yaml
index 8428415896..a39c76b894 100644
--- a/dts/Bindings/usb/nvidia,tegra-xudc.yaml
+++ b/dts/Bindings/usb/nvidia,tegra-xudc.yaml
@@ -59,6 +59,19 @@ properties:
       - const: fs_src
       - const: hs_src
 
+  interconnects:
+    items:
+      - description: memory read client
+      - description: memory write client
+
+  interconnect-names:
+    items:
+      - const: dma-mem # read
+      - const: write
+
+  iommus:
+    maxItems: 1
+
   power-domains:
     items:
       - description: XUSBB(device) power-domain
diff --git a/dts/Bindings/usb/qcom,dwc3.yaml b/dts/Bindings/usb/qcom,dwc3.yaml
index 2bdaba023c..2d23a4ff70 100644
--- a/dts/Bindings/usb/qcom,dwc3.yaml
+++ b/dts/Bindings/usb/qcom,dwc3.yaml
@@ -13,7 +13,9 @@ properties:
   compatible:
     items:
       - enum:
+          - qcom,ipq4019-dwc3
           - qcom,ipq6018-dwc3
+          - qcom,ipq8064-dwc3
           - qcom,msm8996-dwc3
           - qcom,msm8998-dwc3
           - qcom,sc7180-dwc3
@@ -23,9 +25,11 @@ properties:
           - qcom,sdx55-dwc3
           - qcom,sm4250-dwc3
           - qcom,sm6115-dwc3
+          - qcom,sm6350-dwc3
           - qcom,sm8150-dwc3
           - qcom,sm8250-dwc3
           - qcom,sm8350-dwc3
+          - qcom,sm8450-dwc3
       - const: qcom,dwc3
 
   reg:
diff --git a/dts/Bindings/usb/snps,dwc3.yaml b/dts/Bindings/usb/snps,dwc3.yaml
index 25ac2c93dc..d29ffcd274 100644
--- a/dts/Bindings/usb/snps,dwc3.yaml
+++ b/dts/Bindings/usb/snps,dwc3.yaml
@@ -36,6 +36,9 @@ properties:
         - const: synopsys,dwc3
           deprecated: true
 
+  reg:
+    maxItems: 1
+
   interrupts:
     description:
       It's either a single common DWC3 interrupt (dwc_usb3) or individual
@@ -65,6 +68,9 @@ properties:
         - enum: [bus_early, ref, suspend]
         - true
 
+  iommus:
+    maxItems: 1
+
   usb-phy:
     minItems: 1
     items:
diff --git a/dts/Bindings/vendor-prefixes.yaml b/dts/Bindings/vendor-prefixes.yaml
index 66d6432fd7..294093d45a 100644
--- a/dts/Bindings/vendor-prefixes.yaml
+++ b/dts/Bindings/vendor-prefixes.yaml
@@ -25,6 +25,8 @@ patternProperties:
   # Keep list in alphabetical order.
   "^70mai,.*":
     description: 70mai Co., Ltd.
+  "^8dev,.*":
+    description: 8devices, UAB
   "^abb,.*":
     description: ABB
   "^abilis,.*":
@@ -187,6 +189,8 @@ patternProperties:
     description: Shanghai Broadmobi Communication Technology Co.,Ltd.
   "^brcm,.*":
     description: Broadcom Corporation
+  "^bsh,.*":
+    description: BSH Hausgeraete GmbH
   "^buffalo,.*":
     description: Buffalo, Inc.
   "^bur,.*":
@@ -379,6 +383,8 @@ patternProperties:
     description: Silicon Laboratories (formerly Energy Micro AS)
   "^engicam,.*":
     description: Engicam S.r.l.
+  "^engleder,.*":
+    description: Engleder
   "^epcos,.*":
     description: EPCOS AG
   "^epfl,.*":
@@ -437,6 +443,8 @@ patternProperties:
     description: Freescale Semiconductor
   "^fujitsu,.*":
     description: Fujitsu Ltd.
+  "^fxtec,.*":
+    description: FX Technology Ltd.
   "^gardena,.*":
     description: GARDENA GmbH
   "^gateworks,.*":
@@ -511,6 +519,8 @@ patternProperties:
     description: HannStar Display Co.
   "^holtek,.*":
     description: Holtek Semiconductor, Inc.
+  "^huawei,.*":
+    description: Huawei Technologies Co., Ltd.
   "^hugsun,.*":
     description: Shenzhen Hugsun Technology Co. Ltd.
   "^hwacom,.*":
@@ -593,6 +603,8 @@ patternProperties:
     description: JetHome (IP Sokolov P.A.)
   "^jianda,.*":
     description: Jiandangjing Technology Co., Ltd.
+  "^joz,.*":
+    description: JOZ BV
   "^kam,.*":
     description: Kamstrup A/S
   "^karo,.*":
@@ -852,6 +864,8 @@ patternProperties:
     description: OLIMEX Ltd.
   "^olpc,.*":
     description: One Laptop Per Child
+  "^oneplus,.*":
+    description: OnePlus Technology (Shenzhen) Co., Ltd.
   "^onion,.*":
     description: Onion Corporation
   "^onnn,.*":
@@ -1153,6 +1167,8 @@ patternProperties:
     description: Summit microelectronics
   "^sunchip,.*":
     description: Shenzhen Sunchip Technology Co., Ltd
+  "^sunplus,.*":
+    description: Sunplus Technology Co., Ltd.
   "^SUNW,.*":
     description: Sun Microsystems, Inc
   "^supermicro,.*":
@@ -1191,10 +1207,14 @@ patternProperties:
     description: Terasic Inc.
   "^tfc,.*":
     description: Three Five Corp
+  "^thead,.*":
+    description: T-Head Semiconductor Co., Ltd.
   "^thine,.*":
     description: THine Electronics, Inc.
   "^thingyjp,.*":
     description: thingy.jp
+  "^thundercomm,.*":
+    description: Thundercomm Technology Co., Ltd.
   "^ti,.*":
     description: Texas Instruments
   "^tianma,.*":
@@ -1236,6 +1256,8 @@ patternProperties:
     description: Truly Semiconductors Limited
   "^visionox,.*":
     description: Visionox
+  "^team-source-display,.*":
+    description: Shenzhen Team Source Display Technology Co., Ltd. (TSD)
   "^tsd,.*":
     description: Theobroma Systems Design und Consulting GmbH
   "^tyan,.*":
@@ -1272,6 +1294,8 @@ patternProperties:
     description: Variscite Ltd.
   "^vdl,.*":
     description: Van der Laan b.v.
+  "^vertexcom,.*":
+    description: Vertexcom Technologies, Inc.
   "^via,.*":
     description: VIA Technologies, Inc.
   "^videostrong,.*":
@@ -1318,6 +1342,10 @@ patternProperties:
     description: Wiligear, Ltd.
   "^winbond,.*":
     description: Winbond Electronics corp.
+  "^wingtech,.*":
+    description: Wingtech Technology Co., Ltd.
+  "^winlink,.*":
+    description: WinLink Co., Ltd
   "^winstar,.*":
     description: Winstar Display Corp.
   "^wits,.*":
@@ -1328,6 +1356,8 @@ patternProperties:
     description: Wondermedia Technologies, Inc.
   "^wobo,.*":
     description: Wobo
+  "^wanchanglong,.*":
+    description: Wanchanglong Electronics Technology（SHENZHEN）Co.，Ltd.
   "^x-powers,.*":
     description: X-Powers
   "^xes,.*":
@@ -1350,6 +1380,8 @@ patternProperties:
     description: Shenzhen Xunlong Software CO.,Limited
   "^xylon,.*":
     description: Xylon
+  "^yadro,.*":
+    description: YADRO
   "^yamaha,.*":
     description: Yamaha Corporation
   "^yes-optoelectronics,.*":
diff --git a/dts/Bindings/watchdog/apple,wdt.yaml b/dts/Bindings/watchdog/apple,wdt.yaml
new file mode 100644
index 0000000000..e58c56a6fd
--- /dev/null
+++ b/dts/Bindings/watchdog/apple,wdt.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/apple,wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Apple SoC Watchdog
+
+allOf:
+  - $ref: "watchdog.yaml#"
+
+maintainers:
+  - Sven Peter <sven@svenpeter.dev>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - apple,t8103-wdt
+          - apple,t6000-wdt
+      - const: apple,wdt
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/apple-aic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    wdt: watchdog@50000000 {
+        compatible = "apple,t8103-wdt", "apple,wdt";
+        reg = <0x50000000 0x4000>;
+        clocks = <&clk>;
+        interrupts = <AIC_IRQ 123 IRQ_TYPE_LEVEL_HIGH>;
+    };
+
+...
diff --git a/dts/Bindings/watchdog/atmel,sama5d4-wdt.yaml b/dts/Bindings/watchdog/atmel,sama5d4-wdt.yaml
index 9856cd76c2..a9635c0376 100644
--- a/dts/Bindings/watchdog/atmel,sama5d4-wdt.yaml
+++ b/dts/Bindings/watchdog/atmel,sama5d4-wdt.yaml
@@ -22,6 +22,9 @@ properties:
   reg:
     maxItems: 1
 
+  interrupts:
+    maxItems: 1
+
   atmel,watchdog-type:
     $ref: /schemas/types.yaml#/definitions/string
     description: should be hardware or software.
diff --git a/dts/Bindings/watchdog/brcm,bcm7038-wdt.txt b/dts/Bindings/watchdog/brcm,bcm7038-wdt.txt
deleted file mode 100644
index 84122270be..0000000000
--- a/dts/Bindings/watchdog/brcm,bcm7038-wdt.txt
+++ /dev/null
@@ -1,19 +0,0 @@
-BCM7038 Watchdog timer
-
-Required properties:
-
-- compatible : should be "brcm,bcm7038-wdt"
-- reg : Specifies base physical address and size of the registers.
-
-Optional properties:
-
-- clocks: The clock running the watchdog. If no clock is found the
-	  driver will default to 27000000 Hz.
-
-Example:
-
-watchdog@f040a7e8 {
-	compatible = "brcm,bcm7038-wdt";
-	clocks = <&upg_fixed>;
-	reg = <0xf040a7e8 0x16>;
-};
diff --git a/dts/Bindings/watchdog/brcm,bcm7038-wdt.yaml b/dts/Bindings/watchdog/brcm,bcm7038-wdt.yaml
new file mode 100644
index 0000000000..a926809352
--- /dev/null
+++ b/dts/Bindings/watchdog/brcm,bcm7038-wdt.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/brcm,bcm7038-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: BCM63xx and BCM7038 watchdog timer
+
+allOf:
+  - $ref: "watchdog.yaml#"
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+  - Justin Chen <justinpopo6@gmail.com>
+  - Rafał Miłecki <rafal@milecki.pl>
+
+properties:
+  compatible:
+    enum:
+      - brcm,bcm6345-wdt
+      - brcm,bcm7038-wdt
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description: >
+      The clock running the watchdog. If no clock is found the driver will
+      default to 27000000 Hz.
+
+unevaluatedProperties: false
+
+required:
+  - reg
+
+examples:
+  - |
+    watchdog@f040a7e8 {
+      compatible = "brcm,bcm7038-wdt";
+      reg = <0xf040a7e8 0x16>;
+      clocks = <&upg_fixed>;
+    };
diff --git a/dts/Bindings/watchdog/fsl-imx7ulp-wdt.yaml b/dts/Bindings/watchdog/fsl-imx7ulp-wdt.yaml
index 51d6d482bb..fb603a20e3 100644
--- a/dts/Bindings/watchdog/fsl-imx7ulp-wdt.yaml
+++ b/dts/Bindings/watchdog/fsl-imx7ulp-wdt.yaml
@@ -14,8 +14,11 @@ allOf:
 
 properties:
   compatible:
-    enum:
-      - fsl,imx7ulp-wdt
+    oneOf:
+      - const: fsl,imx7ulp-wdt
+      - items:
+          - const: fsl,imx8ulp-wdt
+          - const: fsl,imx7ulp-wdt
 
   reg:
     maxItems: 1
diff --git a/dts/Bindings/watchdog/qcom-wdt.yaml b/dts/Bindings/watchdog/qcom-wdt.yaml
index ba60bdf1fe..16c6f82a13 100644
--- a/dts/Bindings/watchdog/qcom-wdt.yaml
+++ b/dts/Bindings/watchdog/qcom-wdt.yaml
@@ -20,7 +20,9 @@ properties:
       - qcom,apss-wdt-sc7280
       - qcom,apss-wdt-sdm845
       - qcom,apss-wdt-sdx55
+      - qcom,apss-wdt-sm6350
       - qcom,apss-wdt-sm8150
+      - qcom,apss-wdt-sm8250
       - qcom,kpss-timer
       - qcom,kpss-wdt
       - qcom,kpss-wdt-apq8064
diff --git a/dts/Bindings/watchdog/realtek,otto-wdt.yaml b/dts/Bindings/watchdog/realtek,otto-wdt.yaml
new file mode 100644
index 0000000000..11b220a5e0
--- /dev/null
+++ b/dts/Bindings/watchdog/realtek,otto-wdt.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/realtek,otto-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Realtek Otto watchdog timer
+
+maintainers:
+  - Sander Vanheule <sander@svanheule.net>
+
+description: |
+  The timer has two timeout phases. Both phases have a maximum duration of 32
+  prescaled clock ticks, which is ca. 43s with a bus clock of 200MHz. The
+  minimum duration of each phase is one tick. Each phase can trigger an
+  interrupt, although the phase 2 interrupt will occur with the system reset.
+  - Phase 1: During this phase, the WDT can be pinged to reset the timeout.
+  - Phase 2: Starts after phase 1 has timed out, and only serves to give the
+    system some time to clean up, or notify others that it's going to reset.
+    During this phase, pinging the WDT has no effect, and a reset is
+    unavoidable, unless the WDT is disabled.
+
+allOf:
+  - $ref: watchdog.yaml#
+
+properties:
+  compatible:
+    enum:
+      - realtek,rtl8380-wdt
+      - realtek,rtl8390-wdt
+      - realtek,rtl9300-wdt
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: interrupt specifier for pretimeout
+      - description: interrupt specifier for timeout
+
+  interrupt-names:
+    items:
+      - const: phase1
+      - const: phase2
+
+  realtek,reset-mode:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: |
+      Specify how the system is reset after a timeout. Defaults to "cpu" if
+      left unspecified.
+    oneOf:
+      - description: Reset the entire chip
+        const: soc
+      - description: |
+          Reset the CPU and IPsec engine, but leave other peripherals untouched
+        const: cpu
+      - description: |
+          Reset the execution pointer, but don't actually reset any hardware
+        const: software
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+
+unevaluatedProperties: false
+
+dependencies:
+  interrupts: [ interrupt-names ]
+
+examples:
+  - |
+    watchdog: watchdog@3150 {
+        compatible = "realtek,rtl8380-wdt";
+        reg = <0x3150 0xc>;
+
+        realtek,reset-mode = "soc";
+
+        clocks = <&lxbus_clock>;
+        timeout-sec = <20>;
+
+        interrupt-parent = <&rtlintc>;
+        interrupt-names = "phase1", "phase2";
+        interrupts = <19>, <18>;
+    };
+
+...
diff --git a/dts/Bindings/watchdog/renesas,wdt.yaml b/dts/Bindings/watchdog/renesas,wdt.yaml
index ab66d3f0c4..91a98ccd42 100644
--- a/dts/Bindings/watchdog/renesas,wdt.yaml
+++ b/dts/Bindings/watchdog/renesas,wdt.yaml
@@ -10,9 +10,6 @@ maintainers:
   - Wolfram Sang <wsa+renesas@sang-engineering.com>
   - Geert Uytterhoeven <geert+renesas@glider.be>
 
-allOf:
-  - $ref: "watchdog.yaml#"
-
 properties:
   compatible:
     oneOf:
@@ -24,6 +21,11 @@ properties:
 
       - items:
           - enum:
+              - renesas,r9a07g044-wdt    # RZ/G2{L,LC}
+          - const: renesas,rzg2l-wdt     # RZ/G2L
+
+      - items:
+          - enum:
               - renesas,r8a7742-wdt      # RZ/G1H
               - renesas,r8a7743-wdt      # RZ/G1M
               - renesas,r8a7744-wdt      # RZ/G1N
@@ -56,11 +58,13 @@ properties:
   reg:
     maxItems: 1
 
-  interrupts:
-    maxItems: 1
+  interrupts: true
 
-  clocks:
-    maxItems: 1
+  interrupt-names: true
+
+  clocks: true
+
+  clock-names: true
 
   power-domains:
     maxItems: 1
@@ -75,17 +79,52 @@ required:
   - reg
   - clocks
 
-if:
-  not:
-    properties:
-      compatible:
-        contains:
-          enum:
-            - renesas,rza-wdt
-then:
-  required:
-    - power-domains
-    - resets
+allOf:
+  - $ref: "watchdog.yaml#"
+
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - renesas,rza-wdt
+    then:
+      required:
+        - power-domains
+        - resets
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,rzg2l-wdt
+    then:
+      properties:
+        interrupts:
+          maxItems: 2
+        interrupt-names:
+          items:
+            - const: wdt
+            - const: perrout
+        clocks:
+          items:
+            - description: Register access clock
+            - description: Main clock
+        clock-names:
+          items:
+            - const: pclk
+            - const: oscclk
+      required:
+        - clock-names
+        - interrupt-names
+    else:
+      properties:
+        interrupts:
+          maxItems: 1
+        clocks:
+          maxItems: 1
 
 additionalProperties: false
 
diff --git a/dts/Bindings/watchdog/samsung-wdt.yaml b/dts/Bindings/watchdog/samsung-wdt.yaml
index 76cb9586ee..b08373336b 100644
--- a/dts/Bindings/watchdog/samsung-wdt.yaml
+++ b/dts/Bindings/watchdog/samsung-wdt.yaml
@@ -22,25 +22,32 @@ properties:
       - samsung,exynos5250-wdt                # for Exynos5250
       - samsung,exynos5420-wdt                # for Exynos5420
       - samsung,exynos7-wdt                   # for Exynos7
+      - samsung,exynos850-wdt                 # for Exynos850
 
   reg:
     maxItems: 1
 
   clocks:
-    maxItems: 1
+    minItems: 1
+    maxItems: 2
 
   clock-names:
-    items:
-      - const: watchdog
+    minItems: 1
+    maxItems: 2
 
   interrupts:
     maxItems: 1
 
+  samsung,cluster-index:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Index of CPU cluster on which watchdog is running (in case of Exynos850)
+
   samsung,syscon-phandle:
     $ref: /schemas/types.yaml#/definitions/phandle
     description:
-      Phandle to the PMU system controller node (in case of Exynos5250
-      and Exynos5420).
+      Phandle to the PMU system controller node (in case of Exynos5250,
+      Exynos5420, Exynos7 and Exynos850).
 
 required:
   - compatible
@@ -58,9 +65,40 @@ allOf:
             enum:
               - samsung,exynos5250-wdt
               - samsung,exynos5420-wdt
+              - samsung,exynos7-wdt
+              - samsung,exynos850-wdt
     then:
       required:
         - samsung,syscon-phandle
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,exynos850-wdt
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Bus clock, used for register interface
+            - description: Source clock (driving watchdog counter)
+        clock-names:
+          items:
+            - const: watchdog
+            - const: watchdog_src
+        samsung,cluster-index:
+          enum: [0, 1]
+      required:
+        - samsung,cluster-index
+    else:
+      properties:
+        clocks:
+          items:
+            - description: Bus clock, which is also a source clock
+        clock-names:
+          items:
+            - const: watchdog
+        samsung,cluster-index: false
 
 unevaluatedProperties: false
 
diff --git a/dts/Bindings/watchdog/ti,rti-wdt.yaml b/dts/Bindings/watchdog/ti,rti-wdt.yaml
index 054584d754..2f33635876 100644
--- a/dts/Bindings/watchdog/ti,rti-wdt.yaml
+++ b/dts/Bindings/watchdog/ti,rti-wdt.yaml
@@ -34,12 +34,6 @@ properties:
   power-domains:
     maxItems: 1
 
-  assigned-clocks:
-    maxItems: 1
-
-  assigned-clocks-parents:
-    maxItems: 1
-
 required:
   - compatible
   - reg
diff --git a/dts/include/dt-bindings/clock/exynos4.h b/dts/include/dt-bindings/clock/exynos4.h
index 88ec3968b9..acbfbab875 100644
--- a/dts/include/dt-bindings/clock/exynos4.h
+++ b/dts/include/dt-bindings/clock/exynos4.h
@@ -209,6 +209,7 @@
 #define CLK_ACLK400_MCUISP	395 /* Exynos4x12 only */
 #define CLK_MOUT_HDMI		396
 #define CLK_MOUT_MIXER		397
+#define CLK_MOUT_VPLLSRC	398
 
 /* gate clocks - ppmu */
 #define CLK_PPMULEFT		400
@@ -236,9 +237,10 @@
 #define CLK_DIV_C2C		458 /* Exynos4x12 only */
 #define CLK_DIV_GDL		459
 #define CLK_DIV_GDR		460
+#define CLK_DIV_CORE2		461
 
 /* must be greater than maximal clock id */
-#define CLK_NR_CLKS		461
+#define CLK_NR_CLKS		462
 
 /* Exynos4x12 ISP clocks */
 #define CLK_ISP_FIMC_ISP		 1
diff --git a/dts/include/dt-bindings/clock/exynos5250.h b/dts/include/dt-bindings/clock/exynos5250.h
index e259cc01f2..4680da7357 100644
--- a/dts/include/dt-bindings/clock/exynos5250.h
+++ b/dts/include/dt-bindings/clock/exynos5250.h
@@ -19,6 +19,7 @@
 #define CLK_FOUT_EPLL		7
 #define CLK_FOUT_VPLL		8
 #define CLK_ARM_CLK		9
+#define CLK_DIV_ARM2		10
 
 /* gate for special clocks (sclk) */
 #define CLK_SCLK_CAM_BAYER	128
@@ -174,8 +175,9 @@
 #define CLK_MOUT_ACLK300_DISP1_SUB	1027
 #define CLK_MOUT_APLL		1028
 #define CLK_MOUT_MPLL		1029
+#define CLK_MOUT_VPLLSRC	1030
 
 /* must be greater than maximal clock id */
-#define CLK_NR_CLKS		1030
+#define CLK_NR_CLKS		1031
 
 #endif /* _DT_BINDINGS_CLOCK_EXYNOS_5250_H */
diff --git a/dts/include/dt-bindings/clock/exynos7885.h b/dts/include/dt-bindings/clock/exynos7885.h
new file mode 100644
index 0000000000..1f8701691d
--- /dev/null
+++ b/dts/include/dt-bindings/clock/exynos7885.h
@@ -0,0 +1,115 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (c) 2021 Dávid Virág
+ *
+ * Device Tree binding constants for Exynos7885 clock controller.
+ */
+
+#ifndef _DT_BINDINGS_CLOCK_EXYNOS_7885_H
+#define _DT_BINDINGS_CLOCK_EXYNOS_7885_H
+
+/* CMU_TOP */
+#define CLK_FOUT_SHARED0_PLL		1
+#define CLK_FOUT_SHARED1_PLL		2
+#define CLK_DOUT_SHARED0_DIV2		3
+#define CLK_DOUT_SHARED0_DIV3		4
+#define CLK_DOUT_SHARED0_DIV4		5
+#define CLK_DOUT_SHARED0_DIV5		6
+#define CLK_DOUT_SHARED1_DIV2		7
+#define CLK_DOUT_SHARED1_DIV3		8
+#define CLK_DOUT_SHARED1_DIV4		9
+#define CLK_MOUT_CORE_BUS		10
+#define CLK_MOUT_CORE_CCI		11
+#define CLK_MOUT_CORE_G3D		12
+#define CLK_DOUT_CORE_BUS		13
+#define CLK_DOUT_CORE_CCI		14
+#define CLK_DOUT_CORE_G3D		15
+#define CLK_GOUT_CORE_BUS		16
+#define CLK_GOUT_CORE_CCI		17
+#define CLK_GOUT_CORE_G3D		18
+#define CLK_MOUT_PERI_BUS		19
+#define CLK_MOUT_PERI_SPI0		20
+#define CLK_MOUT_PERI_SPI1		21
+#define CLK_MOUT_PERI_UART0		22
+#define CLK_MOUT_PERI_UART1		23
+#define CLK_MOUT_PERI_UART2		24
+#define CLK_MOUT_PERI_USI0		25
+#define CLK_MOUT_PERI_USI1		26
+#define CLK_MOUT_PERI_USI2		27
+#define CLK_DOUT_PERI_BUS		28
+#define CLK_DOUT_PERI_SPI0		29
+#define CLK_DOUT_PERI_SPI1		30
+#define CLK_DOUT_PERI_UART0		31
+#define CLK_DOUT_PERI_UART1		32
+#define CLK_DOUT_PERI_UART2		33
+#define CLK_DOUT_PERI_USI0		34
+#define CLK_DOUT_PERI_USI1		35
+#define CLK_DOUT_PERI_USI2		36
+#define CLK_GOUT_PERI_BUS		37
+#define CLK_GOUT_PERI_SPI0		38
+#define CLK_GOUT_PERI_SPI1		39
+#define CLK_GOUT_PERI_UART0		40
+#define CLK_GOUT_PERI_UART1		41
+#define CLK_GOUT_PERI_UART2		42
+#define CLK_GOUT_PERI_USI0		43
+#define CLK_GOUT_PERI_USI1		44
+#define CLK_GOUT_PERI_USI2		45
+#define TOP_NR_CLK			46
+
+/* CMU_CORE */
+#define CLK_MOUT_CORE_BUS_USER		1
+#define CLK_MOUT_CORE_CCI_USER		2
+#define CLK_MOUT_CORE_G3D_USER		3
+#define CLK_MOUT_CORE_GIC		4
+#define CLK_DOUT_CORE_BUSP		5
+#define CLK_GOUT_CCI_ACLK		6
+#define CLK_GOUT_GIC400_CLK		7
+#define CORE_NR_CLK			8
+
+/* CMU_PERI */
+#define CLK_MOUT_PERI_BUS_USER		1
+#define CLK_MOUT_PERI_SPI0_USER		2
+#define CLK_MOUT_PERI_SPI1_USER		3
+#define CLK_MOUT_PERI_UART0_USER	4
+#define CLK_MOUT_PERI_UART1_USER	5
+#define CLK_MOUT_PERI_UART2_USER	6
+#define CLK_MOUT_PERI_USI0_USER		7
+#define CLK_MOUT_PERI_USI1_USER		8
+#define CLK_MOUT_PERI_USI2_USER		9
+#define CLK_GOUT_GPIO_TOP_PCLK		10
+#define CLK_GOUT_HSI2C0_PCLK		11
+#define CLK_GOUT_HSI2C1_PCLK		12
+#define CLK_GOUT_HSI2C2_PCLK		13
+#define CLK_GOUT_HSI2C3_PCLK		14
+#define CLK_GOUT_I2C0_PCLK		15
+#define CLK_GOUT_I2C1_PCLK		16
+#define CLK_GOUT_I2C2_PCLK		17
+#define CLK_GOUT_I2C3_PCLK		18
+#define CLK_GOUT_I2C4_PCLK		19
+#define CLK_GOUT_I2C5_PCLK		20
+#define CLK_GOUT_I2C6_PCLK		21
+#define CLK_GOUT_I2C7_PCLK		22
+#define CLK_GOUT_PWM_MOTOR_PCLK		23
+#define CLK_GOUT_SPI0_PCLK		24
+#define CLK_GOUT_SPI0_EXT_CLK		25
+#define CLK_GOUT_SPI1_PCLK		26
+#define CLK_GOUT_SPI1_EXT_CLK		27
+#define CLK_GOUT_UART0_EXT_UCLK		28
+#define CLK_GOUT_UART0_PCLK		29
+#define CLK_GOUT_UART1_EXT_UCLK		30
+#define CLK_GOUT_UART1_PCLK		31
+#define CLK_GOUT_UART2_EXT_UCLK		32
+#define CLK_GOUT_UART2_PCLK		33
+#define CLK_GOUT_USI0_PCLK		34
+#define CLK_GOUT_USI0_SCLK		35
+#define CLK_GOUT_USI1_PCLK		36
+#define CLK_GOUT_USI1_SCLK		37
+#define CLK_GOUT_USI2_PCLK		38
+#define CLK_GOUT_USI2_SCLK		39
+#define CLK_GOUT_MCT_PCLK		40
+#define CLK_GOUT_SYSREG_PERI_PCLK	41
+#define CLK_GOUT_WDT0_PCLK		42
+#define CLK_GOUT_WDT1_PCLK		43
+#define PERI_NR_CLK			44
+
+#endif /* _DT_BINDINGS_CLOCK_EXYNOS_7885_H */
diff --git a/dts/include/dt-bindings/clock/exynos850.h b/dts/include/dt-bindings/clock/exynos850.h
index 8999184f94..0b6a3c6a7c 100644
--- a/dts/include/dt-bindings/clock/exynos850.h
+++ b/dts/include/dt-bindings/clock/exynos850.h
@@ -55,7 +55,55 @@
 #define CLK_GOUT_PERI_BUS		43
 #define CLK_GOUT_PERI_UART		44
 #define CLK_GOUT_PERI_IP		45
-#define TOP_NR_CLK			46
+#define CLK_MOUT_CLKCMU_APM_BUS		46
+#define CLK_DOUT_CLKCMU_APM_BUS		47
+#define CLK_GOUT_CLKCMU_APM_BUS		48
+#define TOP_NR_CLK			49
+
+/* CMU_APM */
+#define CLK_RCO_I3C_PMIC		1
+#define OSCCLK_RCO_APM			2
+#define CLK_RCO_APM__ALV		3
+#define CLK_DLL_DCO			4
+#define CLK_MOUT_APM_BUS_USER		5
+#define CLK_MOUT_RCO_APM_I3C_USER	6
+#define CLK_MOUT_RCO_APM_USER		7
+#define CLK_MOUT_DLL_USER		8
+#define CLK_MOUT_CLKCMU_CHUB_BUS	9
+#define CLK_MOUT_APM_BUS		10
+#define CLK_MOUT_APM_I3C		11
+#define CLK_DOUT_CLKCMU_CHUB_BUS	12
+#define CLK_DOUT_APM_BUS		13
+#define CLK_DOUT_APM_I3C		14
+#define CLK_GOUT_CLKCMU_CMGP_BUS	15
+#define CLK_GOUT_CLKCMU_CHUB_BUS	16
+#define CLK_GOUT_RTC_PCLK		17
+#define CLK_GOUT_TOP_RTC_PCLK		18
+#define CLK_GOUT_I3C_PCLK		19
+#define CLK_GOUT_I3C_SCLK		20
+#define CLK_GOUT_SPEEDY_PCLK		21
+#define CLK_GOUT_GPIO_ALIVE_PCLK	22
+#define CLK_GOUT_PMU_ALIVE_PCLK		23
+#define CLK_GOUT_SYSREG_APM_PCLK	24
+#define APM_NR_CLK			25
+
+/* CMU_CMGP */
+#define CLK_RCO_CMGP			1
+#define CLK_MOUT_CMGP_ADC		2
+#define CLK_MOUT_CMGP_USI0		3
+#define CLK_MOUT_CMGP_USI1		4
+#define CLK_DOUT_CMGP_ADC		5
+#define CLK_DOUT_CMGP_USI0		6
+#define CLK_DOUT_CMGP_USI1		7
+#define CLK_GOUT_CMGP_ADC_S0_PCLK	8
+#define CLK_GOUT_CMGP_ADC_S1_PCLK	9
+#define CLK_GOUT_CMGP_GPIO_PCLK		10
+#define CLK_GOUT_CMGP_USI0_IPCLK	11
+#define CLK_GOUT_CMGP_USI0_PCLK		12
+#define CLK_GOUT_CMGP_USI1_IPCLK	13
+#define CLK_GOUT_CMGP_USI1_PCLK		14
+#define CLK_GOUT_SYSREG_CMGP_PCLK	15
+#define CMGP_NR_CLK			16
 
 /* CMU_HSI */
 #define CLK_MOUT_HSI_BUS_USER		1
@@ -123,7 +171,9 @@
 #define CLK_GOUT_MMC_EMBD_SDCLKIN	10
 #define CLK_GOUT_SSS_ACLK		11
 #define CLK_GOUT_SSS_PCLK		12
-#define CORE_NR_CLK			13
+#define CLK_GOUT_GPIO_CORE_PCLK		13
+#define CLK_GOUT_SYSREG_CORE_PCLK	14
+#define CORE_NR_CLK			15
 
 /* CMU_DPU */
 #define CLK_MOUT_DPU_USER		1
diff --git a/dts/include/dt-bindings/clock/imx8mp-clock.h b/dts/include/dt-bindings/clock/imx8mp-clock.h
index 43927a1b9e..235c7a00d3 100644
--- a/dts/include/dt-bindings/clock/imx8mp-clock.h
+++ b/dts/include/dt-bindings/clock/imx8mp-clock.h
@@ -117,7 +117,6 @@
 #define IMX8MP_CLK_AUDIO_AHB			108
 #define IMX8MP_CLK_MIPI_DSI_ESC_RX		109
 #define IMX8MP_CLK_IPG_ROOT			110
-#define IMX8MP_CLK_IPG_AUDIO_ROOT		111
 #define IMX8MP_CLK_DRAM_ALT			112
 #define IMX8MP_CLK_DRAM_APB			113
 #define IMX8MP_CLK_VPU_G1			114
diff --git a/dts/include/dt-bindings/clock/ingenic,jz4760-cgu.h b/dts/include/dt-bindings/clock/ingenic,jz4760-cgu.h
index 4bb2e19c47..9fb04ebac6 100644
--- a/dts/include/dt-bindings/clock/ingenic,jz4760-cgu.h
+++ b/dts/include/dt-bindings/clock/ingenic,jz4760-cgu.h
@@ -50,5 +50,7 @@
 #define JZ4760_CLK_LPCLK_DIV	41
 #define JZ4760_CLK_TVE		42
 #define JZ4760_CLK_LPCLK	43
+#define JZ4760_CLK_MDMA		44
+#define JZ4760_CLK_BDMA		45
 
 #endif /* __DT_BINDINGS_CLOCK_JZ4760_CGU_H__ */
diff --git a/dts/include/dt-bindings/clock/ingenic,jz4770-cgu.h b/dts/include/dt-bindings/clock/ingenic,jz4770-cgu.h
index d68a7695a1..0b475e8ae3 100644
--- a/dts/include/dt-bindings/clock/ingenic,jz4770-cgu.h
+++ b/dts/include/dt-bindings/clock/ingenic,jz4770-cgu.h
@@ -54,5 +54,6 @@
 #define JZ4770_CLK_OTG_PHY	45
 #define JZ4770_CLK_EXT512	46
 #define JZ4770_CLK_RTC		47
+#define JZ4770_CLK_BDMA		48
 
 #endif /* __DT_BINDINGS_CLOCK_JZ4770_CGU_H__ */
diff --git a/dts/include/dt-bindings/clock/microchip,lan966x.h b/dts/include/dt-bindings/clock/microchip,lan966x.h
new file mode 100644
index 0000000000..6f9d43d76d
--- /dev/null
+++ b/dts/include/dt-bindings/clock/microchip,lan966x.h
@@ -0,0 +1,34 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (c) 2021 Microchip Inc.
+ *
+ * Author: Kavyasree Kotagiri <kavyasree.kotagiri@microchip.com>
+ */
+
+#ifndef _DT_BINDINGS_CLK_LAN966X_H
+#define _DT_BINDINGS_CLK_LAN966X_H
+
+#define GCK_ID_QSPI0		0
+#define GCK_ID_QSPI1		1
+#define GCK_ID_QSPI2		2
+#define GCK_ID_SDMMC0		3
+#define GCK_ID_PI		4
+#define GCK_ID_MCAN0		5
+#define GCK_ID_MCAN1		6
+#define GCK_ID_FLEXCOM0		7
+#define GCK_ID_FLEXCOM1		8
+#define GCK_ID_FLEXCOM2		9
+#define GCK_ID_FLEXCOM3		10
+#define GCK_ID_FLEXCOM4		11
+#define GCK_ID_TIMER		12
+#define GCK_ID_USB_REFCLK	13
+
+/* Gate clocks */
+#define GCK_GATE_UHPHS		14
+#define GCK_GATE_UDPHS		15
+#define GCK_GATE_MCRAMC		16
+#define GCK_GATE_HMATRIX	17
+
+#define N_CLOCKS		18
+
+#endif
diff --git a/dts/include/dt-bindings/clock/mt7986-clk.h b/dts/include/dt-bindings/clock/mt7986-clk.h
new file mode 100644
index 0000000000..5a9b169324
--- /dev/null
+++ b/dts/include/dt-bindings/clock/mt7986-clk.h
@@ -0,0 +1,169 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (c) 2021 MediaTek Inc.
+ * Author: Sam Shih <sam.shih@mediatek.com>
+ */
+
+#ifndef _DT_BINDINGS_CLK_MT7986_H
+#define _DT_BINDINGS_CLK_MT7986_H
+
+/* APMIXEDSYS */
+
+#define CLK_APMIXED_ARMPLL		0
+#define CLK_APMIXED_NET2PLL		1
+#define CLK_APMIXED_MMPLL		2
+#define CLK_APMIXED_SGMPLL		3
+#define CLK_APMIXED_WEDMCUPLL		4
+#define CLK_APMIXED_NET1PLL		5
+#define CLK_APMIXED_MPLL		6
+#define CLK_APMIXED_APLL2		7
+
+/* TOPCKGEN */
+
+#define CLK_TOP_XTAL			0
+#define CLK_TOP_XTAL_D2			1
+#define CLK_TOP_RTC_32K			2
+#define CLK_TOP_RTC_32P7K		3
+#define CLK_TOP_MPLL_D2			4
+#define CLK_TOP_MPLL_D4			5
+#define CLK_TOP_MPLL_D8			6
+#define CLK_TOP_MPLL_D8_D2		7
+#define CLK_TOP_MPLL_D3_D2		8
+#define CLK_TOP_MMPLL_D2		9
+#define CLK_TOP_MMPLL_D4		10
+#define CLK_TOP_MMPLL_D8		11
+#define CLK_TOP_MMPLL_D8_D2		12
+#define CLK_TOP_MMPLL_D3_D8		13
+#define CLK_TOP_MMPLL_U2PHY		14
+#define CLK_TOP_APLL2_D4		15
+#define CLK_TOP_NET1PLL_D4		16
+#define CLK_TOP_NET1PLL_D5		17
+#define CLK_TOP_NET1PLL_D5_D2		18
+#define CLK_TOP_NET1PLL_D5_D4		19
+#define CLK_TOP_NET1PLL_D8_D2		20
+#define CLK_TOP_NET1PLL_D8_D4		21
+#define CLK_TOP_NET2PLL_D4		22
+#define CLK_TOP_NET2PLL_D4_D2		23
+#define CLK_TOP_NET2PLL_D3_D2		24
+#define CLK_TOP_WEDMCUPLL_D5_D2		25
+#define CLK_TOP_NFI1X_SEL		26
+#define CLK_TOP_SPINFI_SEL		27
+#define CLK_TOP_SPI_SEL			28
+#define CLK_TOP_SPIM_MST_SEL		29
+#define CLK_TOP_UART_SEL		30
+#define CLK_TOP_PWM_SEL			31
+#define CLK_TOP_I2C_SEL			32
+#define CLK_TOP_PEXTP_TL_SEL		33
+#define CLK_TOP_EMMC_250M_SEL		34
+#define CLK_TOP_EMMC_416M_SEL		35
+#define CLK_TOP_F_26M_ADC_SEL		36
+#define CLK_TOP_DRAMC_SEL		37
+#define CLK_TOP_DRAMC_MD32_SEL		38
+#define CLK_TOP_SYSAXI_SEL		39
+#define CLK_TOP_SYSAPB_SEL		40
+#define CLK_TOP_ARM_DB_MAIN_SEL		41
+#define CLK_TOP_ARM_DB_JTSEL		42
+#define CLK_TOP_NETSYS_SEL		43
+#define CLK_TOP_NETSYS_500M_SEL		44
+#define CLK_TOP_NETSYS_MCU_SEL		45
+#define CLK_TOP_NETSYS_2X_SEL		46
+#define CLK_TOP_SGM_325M_SEL		47
+#define CLK_TOP_SGM_REG_SEL		48
+#define CLK_TOP_A1SYS_SEL		49
+#define CLK_TOP_CONN_MCUSYS_SEL		50
+#define CLK_TOP_EIP_B_SEL		51
+#define CLK_TOP_PCIE_PHY_SEL		52
+#define CLK_TOP_USB3_PHY_SEL		53
+#define CLK_TOP_F26M_SEL		54
+#define CLK_TOP_AUD_L_SEL		55
+#define CLK_TOP_A_TUNER_SEL		56
+#define CLK_TOP_U2U3_SEL		57
+#define CLK_TOP_U2U3_SYS_SEL		58
+#define CLK_TOP_U2U3_XHCI_SEL		59
+#define CLK_TOP_DA_U2_REFSEL		60
+#define CLK_TOP_DA_U2_CK_1P_SEL		61
+#define CLK_TOP_AP2CNN_HOST_SEL		62
+#define CLK_TOP_JTAG			63
+
+/* INFRACFG */
+
+#define CLK_INFRA_SYSAXI_D2		0
+#define CLK_INFRA_UART0_SEL		1
+#define CLK_INFRA_UART1_SEL		2
+#define CLK_INFRA_UART2_SEL		3
+#define CLK_INFRA_SPI0_SEL		4
+#define CLK_INFRA_SPI1_SEL		5
+#define CLK_INFRA_PWM1_SEL		6
+#define CLK_INFRA_PWM2_SEL		7
+#define CLK_INFRA_PWM_BSEL		8
+#define CLK_INFRA_PCIE_SEL		9
+#define CLK_INFRA_GPT_STA		10
+#define CLK_INFRA_PWM_HCK		11
+#define CLK_INFRA_PWM_STA		12
+#define CLK_INFRA_PWM1_CK		13
+#define CLK_INFRA_PWM2_CK		14
+#define CLK_INFRA_CQ_DMA_CK		15
+#define CLK_INFRA_EIP97_CK		16
+#define CLK_INFRA_AUD_BUS_CK		17
+#define CLK_INFRA_AUD_26M_CK		18
+#define CLK_INFRA_AUD_L_CK		19
+#define CLK_INFRA_AUD_AUD_CK		20
+#define CLK_INFRA_AUD_EG2_CK		21
+#define CLK_INFRA_DRAMC_26M_CK		22
+#define CLK_INFRA_DBG_CK		23
+#define CLK_INFRA_AP_DMA_CK		24
+#define CLK_INFRA_SEJ_CK		25
+#define CLK_INFRA_SEJ_13M_CK		26
+#define CLK_INFRA_THERM_CK		27
+#define CLK_INFRA_I2C0_CK		28
+#define CLK_INFRA_UART0_CK		29
+#define CLK_INFRA_UART1_CK		30
+#define CLK_INFRA_UART2_CK		31
+#define CLK_INFRA_NFI1_CK		32
+#define CLK_INFRA_SPINFI1_CK		33
+#define CLK_INFRA_NFI_HCK_CK		34
+#define CLK_INFRA_SPI0_CK		35
+#define CLK_INFRA_SPI1_CK		36
+#define CLK_INFRA_SPI0_HCK_CK		37
+#define CLK_INFRA_SPI1_HCK_CK		38
+#define CLK_INFRA_FRTC_CK		39
+#define CLK_INFRA_MSDC_CK		40
+#define CLK_INFRA_MSDC_HCK_CK		41
+#define CLK_INFRA_MSDC_133M_CK		42
+#define CLK_INFRA_MSDC_66M_CK		43
+#define CLK_INFRA_ADC_26M_CK		44
+#define CLK_INFRA_ADC_FRC_CK		45
+#define CLK_INFRA_FBIST2FPC_CK		46
+#define CLK_INFRA_IUSB_133_CK		47
+#define CLK_INFRA_IUSB_66M_CK		48
+#define CLK_INFRA_IUSB_SYS_CK		49
+#define CLK_INFRA_IUSB_CK		50
+#define CLK_INFRA_IPCIE_CK		51
+#define CLK_INFRA_IPCIE_PIPE_CK		52
+#define CLK_INFRA_IPCIER_CK		53
+#define CLK_INFRA_IPCIEB_CK		54
+#define CLK_INFRA_TRNG_CK		55
+
+/* SGMIISYS_0 */
+
+#define CLK_SGMII0_TX250M_EN		0
+#define CLK_SGMII0_RX250M_EN		1
+#define CLK_SGMII0_CDR_REF		2
+#define CLK_SGMII0_CDR_FB		3
+
+/* SGMIISYS_1 */
+
+#define CLK_SGMII1_TX250M_EN		0
+#define CLK_SGMII1_RX250M_EN		1
+#define CLK_SGMII1_CDR_REF		2
+#define CLK_SGMII1_CDR_FB		3
+
+/* ETHSYS */
+
+#define CLK_ETH_FE_EN			0
+#define CLK_ETH_GP2_EN			1
+#define CLK_ETH_GP1_EN			2
+#define CLK_ETH_WOCPU1_EN		3
+#define CLK_ETH_WOCPU0_EN		4
+
+#endif /* _DT_BINDINGS_CLK_MT7986_H */
diff --git a/dts/include/dt-bindings/clock/qcom,gcc-msm8976.h b/dts/include/dt-bindings/clock/qcom,gcc-msm8976.h
new file mode 100644
index 0000000000..51955fd494
--- /dev/null
+++ b/dts/include/dt-bindings/clock/qcom,gcc-msm8976.h
@@ -0,0 +1,240 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (C) 2016, The Linux Foundation. All rights reserved.
+ * Copyright (C) 2016-2021, AngeloGioacchino Del Regno
+ *                     <angelogioacchino.delregno@somainline.org>
+ */
+
+#ifndef _DT_BINDINGS_CLK_MSM_GCC_8976_H
+#define _DT_BINDINGS_CLK_MSM_GCC_8976_H
+
+#define GPLL0					0
+#define GPLL2					1
+#define GPLL3					2
+#define GPLL4					3
+#define GPLL6					4
+#define GPLL0_CLK_SRC				5
+#define GPLL2_CLK_SRC				6
+#define GPLL3_CLK_SRC				7
+#define GPLL4_CLK_SRC				8
+#define GPLL6_CLK_SRC				9
+#define GCC_BLSP1_QUP1_SPI_APPS_CLK		10
+#define GCC_BLSP1_QUP1_I2C_APPS_CLK		11
+#define GCC_BLSP1_QUP2_I2C_APPS_CLK		12
+#define GCC_BLSP1_QUP2_SPI_APPS_CLK		13
+#define GCC_BLSP1_QUP3_I2C_APPS_CLK		14
+#define GCC_BLSP1_QUP3_SPI_APPS_CLK		15
+#define GCC_BLSP1_QUP4_I2C_APPS_CLK		16
+#define GCC_BLSP1_QUP4_SPI_APPS_CLK		17
+#define GCC_BLSP1_UART1_APPS_CLK		18
+#define GCC_BLSP1_UART2_APPS_CLK		19
+#define GCC_BLSP2_QUP1_I2C_APPS_CLK		20
+#define GCC_BLSP2_QUP1_SPI_APPS_CLK		21
+#define GCC_BLSP2_QUP2_I2C_APPS_CLK		22
+#define GCC_BLSP2_QUP2_SPI_APPS_CLK		23
+#define GCC_BLSP2_QUP3_I2C_APPS_CLK		24
+#define GCC_BLSP2_QUP3_SPI_APPS_CLK		25
+#define GCC_BLSP2_QUP4_I2C_APPS_CLK		26
+#define GCC_BLSP2_QUP4_SPI_APPS_CLK		27
+#define GCC_BLSP2_UART1_APPS_CLK		28
+#define GCC_BLSP2_UART2_APPS_CLK		29
+#define GCC_CAMSS_CCI_AHB_CLK			30
+#define GCC_CAMSS_CCI_CLK			31
+#define GCC_CAMSS_CPP_AHB_CLK			32
+#define GCC_CAMSS_CPP_AXI_CLK			33
+#define GCC_CAMSS_CPP_CLK			34
+#define GCC_CAMSS_CSI0_AHB_CLK			35
+#define GCC_CAMSS_CSI0_CLK			36
+#define GCC_CAMSS_CSI0PHY_CLK			37
+#define GCC_CAMSS_CSI0PIX_CLK			38
+#define GCC_CAMSS_CSI0RDI_CLK			39
+#define GCC_CAMSS_CSI1_AHB_CLK			40
+#define GCC_CAMSS_CSI1_CLK			41
+#define GCC_CAMSS_CSI1PHY_CLK			42
+#define GCC_CAMSS_CSI1PIX_CLK			43
+#define GCC_CAMSS_CSI1RDI_CLK			44
+#define GCC_CAMSS_CSI2_AHB_CLK			45
+#define GCC_CAMSS_CSI2_CLK			46
+#define GCC_CAMSS_CSI2PHY_CLK			47
+#define GCC_CAMSS_CSI2PIX_CLK			48
+#define GCC_CAMSS_CSI2RDI_CLK			49
+#define GCC_CAMSS_CSI_VFE0_CLK			50
+#define GCC_CAMSS_CSI_VFE1_CLK			51
+#define GCC_CAMSS_GP0_CLK			52
+#define GCC_CAMSS_GP1_CLK			53
+#define GCC_CAMSS_ISPIF_AHB_CLK			54
+#define GCC_CAMSS_JPEG0_CLK			55
+#define GCC_CAMSS_JPEG_AHB_CLK			56
+#define GCC_CAMSS_JPEG_AXI_CLK			57
+#define GCC_CAMSS_MCLK0_CLK			58
+#define GCC_CAMSS_MCLK1_CLK			59
+#define GCC_CAMSS_MCLK2_CLK			60
+#define GCC_CAMSS_MICRO_AHB_CLK			61
+#define GCC_CAMSS_CSI0PHYTIMER_CLK		62
+#define GCC_CAMSS_CSI1PHYTIMER_CLK		63
+#define GCC_CAMSS_AHB_CLK			64
+#define GCC_CAMSS_TOP_AHB_CLK			65
+#define GCC_CAMSS_VFE0_CLK			66
+#define GCC_CAMSS_VFE_AHB_CLK			67
+#define GCC_CAMSS_VFE_AXI_CLK			68
+#define GCC_CAMSS_VFE1_AHB_CLK			69
+#define GCC_CAMSS_VFE1_AXI_CLK			70
+#define GCC_CAMSS_VFE1_CLK			71
+#define GCC_DCC_CLK				72
+#define GCC_GP1_CLK				73
+#define GCC_GP2_CLK				74
+#define GCC_GP3_CLK				75
+#define GCC_MDSS_AHB_CLK			76
+#define GCC_MDSS_AXI_CLK			77
+#define GCC_MDSS_ESC0_CLK			78
+#define GCC_MDSS_ESC1_CLK			79
+#define GCC_MDSS_MDP_CLK			80
+#define GCC_MDSS_VSYNC_CLK			81
+#define GCC_MSS_CFG_AHB_CLK			82
+#define GCC_MSS_Q6_BIMC_AXI_CLK			83
+#define GCC_PDM2_CLK				84
+#define GCC_PRNG_AHB_CLK			85
+#define GCC_PDM_AHB_CLK				86
+#define GCC_RBCPR_GFX_AHB_CLK			87
+#define GCC_RBCPR_GFX_CLK			88
+#define GCC_SDCC1_AHB_CLK			89
+#define GCC_SDCC1_APPS_CLK			90
+#define GCC_SDCC1_ICE_CORE_CLK			91
+#define GCC_SDCC2_AHB_CLK			92
+#define GCC_SDCC2_APPS_CLK			93
+#define GCC_SDCC3_AHB_CLK			94
+#define GCC_SDCC3_APPS_CLK			95
+#define GCC_USB2A_PHY_SLEEP_CLK			96
+#define GCC_USB_HS_PHY_CFG_AHB_CLK		97
+#define GCC_USB_FS_AHB_CLK			98
+#define GCC_USB_FS_IC_CLK			99
+#define GCC_USB_FS_SYSTEM_CLK			100
+#define GCC_USB_HS_AHB_CLK			101
+#define GCC_USB_HS_SYSTEM_CLK			102
+#define GCC_VENUS0_AHB_CLK			103
+#define GCC_VENUS0_AXI_CLK			104
+#define GCC_VENUS0_CORE0_VCODEC0_CLK		105
+#define GCC_VENUS0_CORE1_VCODEC0_CLK		106
+#define GCC_VENUS0_VCODEC0_CLK			107
+#define GCC_APSS_AHB_CLK			108
+#define GCC_APSS_AXI_CLK			109
+#define GCC_BLSP1_AHB_CLK			110
+#define GCC_BLSP2_AHB_CLK			111
+#define GCC_BOOT_ROM_AHB_CLK			112
+#define GCC_CRYPTO_AHB_CLK			113
+#define GCC_CRYPTO_AXI_CLK			114
+#define GCC_CRYPTO_CLK				115
+#define GCC_CPP_TBU_CLK				116
+#define GCC_APSS_TCU_CLK			117
+#define GCC_JPEG_TBU_CLK			118
+#define GCC_MDP_RT_TBU_CLK			119
+#define GCC_MDP_TBU_CLK				120
+#define GCC_SMMU_CFG_CLK			121
+#define GCC_VENUS_1_TBU_CLK			122
+#define GCC_VENUS_TBU_CLK			123
+#define GCC_VFE1_TBU_CLK			124
+#define GCC_VFE_TBU_CLK				125
+#define GCC_APS_0_CLK				126
+#define GCC_APS_1_CLK				127
+#define APS_0_CLK_SRC				128
+#define APS_1_CLK_SRC				129
+#define APSS_AHB_CLK_SRC			130
+#define BLSP1_QUP1_I2C_APPS_CLK_SRC		131
+#define BLSP1_QUP1_SPI_APPS_CLK_SRC		132
+#define BLSP1_QUP2_I2C_APPS_CLK_SRC		133
+#define BLSP1_QUP2_SPI_APPS_CLK_SRC		134
+#define BLSP1_QUP3_I2C_APPS_CLK_SRC		135
+#define BLSP1_QUP3_SPI_APPS_CLK_SRC		136
+#define BLSP1_QUP4_I2C_APPS_CLK_SRC		137
+#define BLSP1_QUP4_SPI_APPS_CLK_SRC		138
+#define BLSP1_UART1_APPS_CLK_SRC		139
+#define BLSP1_UART2_APPS_CLK_SRC		140
+#define BLSP2_QUP1_I2C_APPS_CLK_SRC		141
+#define BLSP2_QUP1_SPI_APPS_CLK_SRC		142
+#define BLSP2_QUP2_I2C_APPS_CLK_SRC		143
+#define BLSP2_QUP2_SPI_APPS_CLK_SRC		144
+#define BLSP2_QUP3_I2C_APPS_CLK_SRC		145
+#define BLSP2_QUP3_SPI_APPS_CLK_SRC		146
+#define BLSP2_QUP4_I2C_APPS_CLK_SRC		147
+#define BLSP2_QUP4_SPI_APPS_CLK_SRC		148
+#define BLSP2_UART1_APPS_CLK_SRC		149
+#define BLSP2_UART2_APPS_CLK_SRC		150
+#define CCI_CLK_SRC				151
+#define CPP_CLK_SRC				152
+#define CSI0_CLK_SRC				153
+#define CSI1_CLK_SRC				154
+#define CSI2_CLK_SRC				155
+#define CAMSS_GP0_CLK_SRC			156
+#define CAMSS_GP1_CLK_SRC			157
+#define JPEG0_CLK_SRC				158
+#define MCLK0_CLK_SRC				159
+#define MCLK1_CLK_SRC				160
+#define MCLK2_CLK_SRC				161
+#define CSI0PHYTIMER_CLK_SRC			162
+#define CSI1PHYTIMER_CLK_SRC			163
+#define CAMSS_TOP_AHB_CLK_SRC			164
+#define VFE0_CLK_SRC				165
+#define VFE1_CLK_SRC				166
+#define CRYPTO_CLK_SRC				167
+#define GP1_CLK_SRC				168
+#define GP2_CLK_SRC				169
+#define GP3_CLK_SRC				170
+#define ESC0_CLK_SRC				171
+#define ESC1_CLK_SRC				172
+#define MDP_CLK_SRC				173
+#define VSYNC_CLK_SRC				174
+#define PDM2_CLK_SRC				175
+#define RBCPR_GFX_CLK_SRC			176
+#define SDCC1_APPS_CLK_SRC			177
+#define SDCC1_ICE_CORE_CLK_SRC			178
+#define SDCC2_APPS_CLK_SRC			179
+#define SDCC3_APPS_CLK_SRC			180
+#define USB_FS_IC_CLK_SRC			181
+#define USB_FS_SYSTEM_CLK_SRC			182
+#define USB_HS_SYSTEM_CLK_SRC			183
+#define VCODEC0_CLK_SRC				184
+#define GCC_MDSS_BYTE0_CLK_SRC			185
+#define GCC_MDSS_BYTE1_CLK_SRC			186
+#define GCC_MDSS_BYTE0_CLK			187
+#define GCC_MDSS_BYTE1_CLK			188
+#define GCC_MDSS_PCLK0_CLK_SRC			189
+#define GCC_MDSS_PCLK1_CLK_SRC			190
+#define GCC_MDSS_PCLK0_CLK			191
+#define GCC_MDSS_PCLK1_CLK			192
+#define GCC_GFX3D_CLK_SRC			193
+#define GCC_GFX3D_OXILI_CLK			194
+#define GCC_GFX3D_BIMC_CLK			195
+#define GCC_GFX3D_OXILI_AHB_CLK			196
+#define GCC_GFX3D_OXILI_AON_CLK			197
+#define GCC_GFX3D_OXILI_GMEM_CLK		198
+#define GCC_GFX3D_OXILI_TIMER_CLK		199
+#define GCC_GFX3D_TBU0_CLK			200
+#define GCC_GFX3D_TBU1_CLK			201
+#define GCC_GFX3D_TCU_CLK			202
+#define GCC_GFX3D_GTCU_AHB_CLK			203
+
+/* GCC block resets */
+#define RST_CAMSS_MICRO_BCR			0
+#define RST_USB_HS_BCR				1
+#define RST_QUSB2_PHY_BCR			2
+#define RST_USB2_HS_PHY_ONLY_BCR		3
+#define RST_USB_HS_PHY_CFG_AHB_BCR		4
+#define RST_USB_FS_BCR				5
+#define RST_CAMSS_CSI1PIX_BCR			6
+#define RST_CAMSS_CSI_VFE1_BCR			7
+#define RST_CAMSS_VFE1_BCR			8
+#define RST_CAMSS_CPP_BCR			9
+
+/* GDSCs */
+#define VENUS_GDSC				0
+#define VENUS_CORE0_GDSC			1
+#define VENUS_CORE1_GDSC			2
+#define MDSS_GDSC				3
+#define JPEG_GDSC				4
+#define VFE0_GDSC				5
+#define VFE1_GDSC				6
+#define CPP_GDSC				7
+#define OXILI_GX_GDSC				8
+#define OXILI_CX_GDSC				9
+
+#endif /* _DT_BINDINGS_CLK_MSM_GCC_8976_H */
diff --git a/dts/include/dt-bindings/clock/qcom,gcc-sdx65.h b/dts/include/dt-bindings/clock/qcom,gcc-sdx65.h
new file mode 100644
index 0000000000..75ecc9237d
--- /dev/null
+++ b/dts/include/dt-bindings/clock/qcom,gcc-sdx65.h
@@ -0,0 +1,122 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (c) 2021, Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#ifndef _DT_BINDINGS_CLK_QCOM_GCC_SDX65_H
+#define _DT_BINDINGS_CLK_QCOM_GCC_SDX65_H
+
+/* GCC clocks */
+#define GPLL0							0
+#define GPLL0_OUT_EVEN						1
+#define GCC_AHB_PCIE_LINK_CLK					2
+#define GCC_BLSP1_AHB_CLK					3
+#define GCC_BLSP1_QUP1_I2C_APPS_CLK				4
+#define GCC_BLSP1_QUP1_I2C_APPS_CLK_SRC				5
+#define GCC_BLSP1_QUP1_SPI_APPS_CLK				6
+#define GCC_BLSP1_QUP1_SPI_APPS_CLK_SRC				7
+#define GCC_BLSP1_QUP2_I2C_APPS_CLK				8
+#define GCC_BLSP1_QUP2_I2C_APPS_CLK_SRC				9
+#define GCC_BLSP1_QUP2_SPI_APPS_CLK				10
+#define GCC_BLSP1_QUP2_SPI_APPS_CLK_SRC				11
+#define GCC_BLSP1_QUP3_I2C_APPS_CLK				12
+#define GCC_BLSP1_QUP3_I2C_APPS_CLK_SRC				13
+#define GCC_BLSP1_QUP3_SPI_APPS_CLK				14
+#define GCC_BLSP1_QUP3_SPI_APPS_CLK_SRC				15
+#define GCC_BLSP1_QUP4_I2C_APPS_CLK				16
+#define GCC_BLSP1_QUP4_I2C_APPS_CLK_SRC				17
+#define GCC_BLSP1_QUP4_SPI_APPS_CLK				18
+#define GCC_BLSP1_QUP4_SPI_APPS_CLK_SRC				19
+#define GCC_BLSP1_SLEEP_CLK					20
+#define GCC_BLSP1_UART1_APPS_CLK				21
+#define GCC_BLSP1_UART1_APPS_CLK_SRC				22
+#define GCC_BLSP1_UART2_APPS_CLK				23
+#define GCC_BLSP1_UART2_APPS_CLK_SRC				24
+#define GCC_BLSP1_UART3_APPS_CLK				25
+#define GCC_BLSP1_UART3_APPS_CLK_SRC				26
+#define GCC_BLSP1_UART4_APPS_CLK				27
+#define GCC_BLSP1_UART4_APPS_CLK_SRC				28
+#define GCC_BOOT_ROM_AHB_CLK					29
+#define GCC_CPUSS_AHB_CLK					30
+#define GCC_CPUSS_AHB_CLK_SRC					31
+#define GCC_CPUSS_AHB_POSTDIV_CLK_SRC				32
+#define GCC_CPUSS_GNOC_CLK					33
+#define GCC_GP1_CLK						34
+#define GCC_GP1_CLK_SRC						35
+#define GCC_GP2_CLK						36
+#define GCC_GP2_CLK_SRC						37
+#define GCC_GP3_CLK						38
+#define GCC_GP3_CLK_SRC						39
+#define GCC_PCIE_0_CLKREF_EN					40
+#define GCC_PCIE_AUX_CLK					41
+#define GCC_PCIE_AUX_CLK_SRC					42
+#define GCC_PCIE_AUX_PHY_CLK_SRC				43
+#define GCC_PCIE_CFG_AHB_CLK					44
+#define GCC_PCIE_MSTR_AXI_CLK					45
+#define GCC_PCIE_PIPE_CLK					46
+#define GCC_PCIE_PIPE_CLK_SRC					47
+#define GCC_PCIE_RCHNG_PHY_CLK					48
+#define GCC_PCIE_RCHNG_PHY_CLK_SRC				49
+#define GCC_PCIE_SLEEP_CLK					50
+#define GCC_PCIE_SLV_AXI_CLK					51
+#define GCC_PCIE_SLV_Q2A_AXI_CLK				52
+#define GCC_PDM2_CLK						53
+#define GCC_PDM2_CLK_SRC					54
+#define GCC_PDM_AHB_CLK						55
+#define GCC_PDM_XO4_CLK						56
+#define GCC_RX1_USB2_CLKREF_EN					57
+#define GCC_SDCC1_AHB_CLK					58
+#define GCC_SDCC1_APPS_CLK					59
+#define GCC_SDCC1_APPS_CLK_SRC					60
+#define GCC_SPMI_FETCHER_AHB_CLK				61
+#define GCC_SPMI_FETCHER_CLK					62
+#define GCC_SPMI_FETCHER_CLK_SRC				63
+#define GCC_SYS_NOC_CPUSS_AHB_CLK				64
+#define GCC_USB30_MASTER_CLK					65
+#define GCC_USB30_MASTER_CLK_SRC				66
+#define GCC_USB30_MOCK_UTMI_CLK					67
+#define GCC_USB30_MOCK_UTMI_CLK_SRC				68
+#define GCC_USB30_MOCK_UTMI_POSTDIV_CLK_SRC			69
+#define GCC_USB30_MSTR_AXI_CLK					70
+#define GCC_USB30_SLEEP_CLK					71
+#define GCC_USB30_SLV_AHB_CLK					72
+#define GCC_USB3_PHY_AUX_CLK					73
+#define GCC_USB3_PHY_AUX_CLK_SRC				74
+#define GCC_USB3_PHY_PIPE_CLK					75
+#define GCC_USB3_PHY_PIPE_CLK_SRC				76
+#define GCC_USB3_PRIM_CLKREF_EN					77
+#define GCC_USB_PHY_CFG_AHB2PHY_CLK				78
+#define GCC_XO_DIV4_CLK						79
+#define GCC_XO_PCIE_LINK_CLK					80
+
+/* GCC resets */
+#define GCC_BLSP1_QUP1_BCR					0
+#define GCC_BLSP1_QUP2_BCR					1
+#define GCC_BLSP1_QUP3_BCR					2
+#define GCC_BLSP1_QUP4_BCR					3
+#define GCC_BLSP1_UART1_BCR					4
+#define GCC_BLSP1_UART2_BCR					5
+#define GCC_BLSP1_UART3_BCR					6
+#define GCC_BLSP1_UART4_BCR					7
+#define GCC_PCIE_BCR						8
+#define GCC_PCIE_LINK_DOWN_BCR					9
+#define GCC_PCIE_NOCSR_COM_PHY_BCR				10
+#define GCC_PCIE_PHY_BCR					11
+#define GCC_PCIE_PHY_CFG_AHB_BCR				12
+#define GCC_PCIE_PHY_COM_BCR					13
+#define GCC_PCIE_PHY_NOCSR_COM_PHY_BCR				14
+#define GCC_PDM_BCR						15
+#define GCC_QUSB2PHY_BCR					16
+#define GCC_SDCC1_BCR						17
+#define GCC_SPMI_FETCHER_BCR					18
+#define GCC_TCSR_PCIE_BCR					19
+#define GCC_USB30_BCR						20
+#define GCC_USB3_PHY_BCR					21
+#define GCC_USB3PHY_PHY_BCR					22
+#define GCC_USB_PHY_CFG_AHB2PHY_BCR				23
+
+/* GCC power domains */
+#define USB30_GDSC                                              0
+#define PCIE_GDSC                                               1
+
+#endif
diff --git a/dts/include/dt-bindings/clock/qcom,gcc-sm8450.h b/dts/include/dt-bindings/clock/qcom,gcc-sm8450.h
new file mode 100644
index 0000000000..cf1469312c
--- /dev/null
+++ b/dts/include/dt-bindings/clock/qcom,gcc-sm8450.h
@@ -0,0 +1,244 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2021, Linaro Limited
+ */
+
+#ifndef _DT_BINDINGS_CLK_QCOM_GCC_SM8450_H
+#define _DT_BINDINGS_CLK_QCOM_GCC_SM8450_H
+
+/* GCC HW clocks */
+#define CORE_BI_PLL_TEST_SE					0
+#define PCIE_0_PIPE_CLK						1
+#define PCIE_1_PHY_AUX_CLK					2
+#define PCIE_1_PIPE_CLK						3
+#define UFS_PHY_RX_SYMBOL_0_CLK					4
+#define UFS_PHY_RX_SYMBOL_1_CLK					5
+#define UFS_PHY_TX_SYMBOL_0_CLK					6
+#define USB3_PHY_WRAPPER_GCC_USB30_PIPE_CLK			7
+
+/* GCC clocks */
+#define GCC_AGGRE_NOC_PCIE_0_AXI_CLK				8
+#define GCC_AGGRE_NOC_PCIE_1_AXI_CLK				9
+#define GCC_AGGRE_UFS_PHY_AXI_CLK				10
+#define GCC_AGGRE_UFS_PHY_AXI_HW_CTL_CLK			11
+#define GCC_AGGRE_USB3_PRIM_AXI_CLK				12
+#define GCC_ANOC_PCIE_PWRCTL_CLK				13
+#define GCC_BOOT_ROM_AHB_CLK					14
+#define GCC_CAMERA_AHB_CLK					15
+#define GCC_CAMERA_HF_AXI_CLK					16
+#define GCC_CAMERA_SF_AXI_CLK					17
+#define GCC_CAMERA_XO_CLK					18
+#define GCC_CFG_NOC_PCIE_ANOC_AHB_CLK				19
+#define GCC_CFG_NOC_USB3_PRIM_AXI_CLK				20
+#define GCC_CPUSS_AHB_CLK					21
+#define GCC_CPUSS_AHB_CLK_SRC					22
+#define GCC_CPUSS_AHB_POSTDIV_CLK_SRC				23
+#define GCC_CPUSS_CONFIG_NOC_SF_CLK				24
+#define GCC_DDRSS_GPU_AXI_CLK					25
+#define GCC_DDRSS_PCIE_SF_TBU_CLK				26
+#define GCC_DISP_AHB_CLK					27
+#define GCC_DISP_HF_AXI_CLK					28
+#define GCC_DISP_SF_AXI_CLK					29
+#define GCC_DISP_XO_CLK						30
+#define GCC_EUSB3_0_CLKREF_EN					31
+#define GCC_GP1_CLK						32
+#define GCC_GP1_CLK_SRC						33
+#define GCC_GP2_CLK						34
+#define GCC_GP2_CLK_SRC						35
+#define GCC_GP3_CLK						36
+#define GCC_GP3_CLK_SRC						37
+#define GCC_GPLL0						38
+#define GCC_GPLL0_OUT_EVEN					39
+#define GCC_GPLL4						40
+#define GCC_GPLL9						41
+#define GCC_GPU_CFG_AHB_CLK					42
+#define GCC_GPU_GPLL0_CLK_SRC					43
+#define GCC_GPU_GPLL0_DIV_CLK_SRC				44
+#define GCC_GPU_MEMNOC_GFX_CLK					45
+#define GCC_GPU_SNOC_DVM_GFX_CLK				46
+#define GCC_PCIE_0_AUX_CLK					47
+#define GCC_PCIE_0_AUX_CLK_SRC					48
+#define GCC_PCIE_0_CFG_AHB_CLK					49
+#define GCC_PCIE_0_CLKREF_EN					50
+#define GCC_PCIE_0_MSTR_AXI_CLK					51
+#define GCC_PCIE_0_PHY_RCHNG_CLK				52
+#define GCC_PCIE_0_PHY_RCHNG_CLK_SRC				53
+#define GCC_PCIE_0_PIPE_CLK					54
+#define GCC_PCIE_0_PIPE_CLK_SRC					55
+#define GCC_PCIE_0_SLV_AXI_CLK					56
+#define GCC_PCIE_0_SLV_Q2A_AXI_CLK				57
+#define GCC_PCIE_1_AUX_CLK					58
+#define GCC_PCIE_1_AUX_CLK_SRC					59
+#define GCC_PCIE_1_CFG_AHB_CLK					60
+#define GCC_PCIE_1_CLKREF_EN					61
+#define GCC_PCIE_1_MSTR_AXI_CLK					62
+#define GCC_PCIE_1_PHY_AUX_CLK					63
+#define GCC_PCIE_1_PHY_AUX_CLK_SRC				64
+#define GCC_PCIE_1_PHY_RCHNG_CLK				65
+#define GCC_PCIE_1_PHY_RCHNG_CLK_SRC				66
+#define GCC_PCIE_1_PIPE_CLK					67
+#define GCC_PCIE_1_PIPE_CLK_SRC					68
+#define GCC_PCIE_1_SLV_AXI_CLK					69
+#define GCC_PCIE_1_SLV_Q2A_AXI_CLK				70
+#define GCC_PDM2_CLK						71
+#define GCC_PDM2_CLK_SRC					72
+#define GCC_PDM_AHB_CLK						73
+#define GCC_PDM_XO4_CLK						74
+#define GCC_QMIP_CAMERA_NRT_AHB_CLK				75
+#define GCC_QMIP_CAMERA_RT_AHB_CLK				76
+#define GCC_QMIP_DISP_AHB_CLK					77
+#define GCC_QMIP_GPU_AHB_CLK					78
+#define GCC_QMIP_PCIE_AHB_CLK					79
+#define GCC_QMIP_VIDEO_CV_CPU_AHB_CLK				80
+#define GCC_QMIP_VIDEO_CVP_AHB_CLK				81
+#define GCC_QMIP_VIDEO_V_CPU_AHB_CLK				82
+#define GCC_QMIP_VIDEO_VCODEC_AHB_CLK				83
+#define GCC_QUPV3_WRAP0_CORE_2X_CLK				84
+#define GCC_QUPV3_WRAP0_CORE_CLK				85
+#define GCC_QUPV3_WRAP0_S0_CLK					86
+#define GCC_QUPV3_WRAP0_S0_CLK_SRC				87
+#define GCC_QUPV3_WRAP0_S1_CLK					88
+#define GCC_QUPV3_WRAP0_S1_CLK_SRC				89
+#define GCC_QUPV3_WRAP0_S2_CLK					90
+#define GCC_QUPV3_WRAP0_S2_CLK_SRC				91
+#define GCC_QUPV3_WRAP0_S3_CLK					92
+#define GCC_QUPV3_WRAP0_S3_CLK_SRC				93
+#define GCC_QUPV3_WRAP0_S4_CLK					94
+#define GCC_QUPV3_WRAP0_S4_CLK_SRC				95
+#define GCC_QUPV3_WRAP0_S5_CLK					96
+#define GCC_QUPV3_WRAP0_S5_CLK_SRC				97
+#define GCC_QUPV3_WRAP0_S6_CLK					98
+#define GCC_QUPV3_WRAP0_S6_CLK_SRC				99
+#define GCC_QUPV3_WRAP0_S7_CLK					100
+#define GCC_QUPV3_WRAP0_S7_CLK_SRC				101
+#define GCC_QUPV3_WRAP1_CORE_2X_CLK				102
+#define GCC_QUPV3_WRAP1_CORE_CLK				103
+#define GCC_QUPV3_WRAP1_S0_CLK					104
+#define GCC_QUPV3_WRAP1_S0_CLK_SRC				105
+#define GCC_QUPV3_WRAP1_S1_CLK					106
+#define GCC_QUPV3_WRAP1_S1_CLK_SRC				107
+#define GCC_QUPV3_WRAP1_S2_CLK					108
+#define GCC_QUPV3_WRAP1_S2_CLK_SRC				109
+#define GCC_QUPV3_WRAP1_S3_CLK					110
+#define GCC_QUPV3_WRAP1_S3_CLK_SRC				111
+#define GCC_QUPV3_WRAP1_S4_CLK					112
+#define GCC_QUPV3_WRAP1_S4_CLK_SRC				113
+#define GCC_QUPV3_WRAP1_S5_CLK					114
+#define GCC_QUPV3_WRAP1_S5_CLK_SRC				115
+#define GCC_QUPV3_WRAP1_S6_CLK					116
+#define GCC_QUPV3_WRAP1_S6_CLK_SRC				117
+#define GCC_QUPV3_WRAP2_CORE_2X_CLK				118
+#define GCC_QUPV3_WRAP2_CORE_CLK				119
+#define GCC_QUPV3_WRAP2_S0_CLK					120
+#define GCC_QUPV3_WRAP2_S0_CLK_SRC				121
+#define GCC_QUPV3_WRAP2_S1_CLK					122
+#define GCC_QUPV3_WRAP2_S1_CLK_SRC				123
+#define GCC_QUPV3_WRAP2_S2_CLK					124
+#define GCC_QUPV3_WRAP2_S2_CLK_SRC				125
+#define GCC_QUPV3_WRAP2_S3_CLK					126
+#define GCC_QUPV3_WRAP2_S3_CLK_SRC				127
+#define GCC_QUPV3_WRAP2_S4_CLK					128
+#define GCC_QUPV3_WRAP2_S4_CLK_SRC				129
+#define GCC_QUPV3_WRAP2_S5_CLK					130
+#define GCC_QUPV3_WRAP2_S5_CLK_SRC				131
+#define GCC_QUPV3_WRAP2_S6_CLK					132
+#define GCC_QUPV3_WRAP2_S6_CLK_SRC				133
+#define GCC_QUPV3_WRAP_0_M_AHB_CLK				134
+#define GCC_QUPV3_WRAP_0_S_AHB_CLK				135
+#define GCC_QUPV3_WRAP_1_M_AHB_CLK				136
+#define GCC_QUPV3_WRAP_1_S_AHB_CLK				137
+#define GCC_QUPV3_WRAP_2_M_AHB_CLK				138
+#define GCC_QUPV3_WRAP_2_S_AHB_CLK				139
+#define GCC_SDCC2_AHB_CLK					140
+#define GCC_SDCC2_APPS_CLK					141
+#define GCC_SDCC2_APPS_CLK_SRC					142
+#define GCC_SDCC2_AT_CLK					143
+#define GCC_SDCC4_AHB_CLK					144
+#define GCC_SDCC4_APPS_CLK					145
+#define GCC_SDCC4_APPS_CLK_SRC					146
+#define GCC_SDCC4_AT_CLK					147
+#define GCC_SYS_NOC_CPUSS_AHB_CLK				148
+#define GCC_UFS_0_CLKREF_EN					149
+#define GCC_UFS_PHY_AHB_CLK					150
+#define GCC_UFS_PHY_AXI_CLK					151
+#define GCC_UFS_PHY_AXI_CLK_SRC					152
+#define GCC_UFS_PHY_AXI_HW_CTL_CLK				153
+#define GCC_UFS_PHY_ICE_CORE_CLK				154
+#define GCC_UFS_PHY_ICE_CORE_CLK_SRC				155
+#define GCC_UFS_PHY_ICE_CORE_HW_CTL_CLK				156
+#define GCC_UFS_PHY_PHY_AUX_CLK					157
+#define GCC_UFS_PHY_PHY_AUX_CLK_SRC				158
+#define GCC_UFS_PHY_PHY_AUX_HW_CTL_CLK				159
+#define GCC_UFS_PHY_RX_SYMBOL_0_CLK				160
+#define GCC_UFS_PHY_RX_SYMBOL_0_CLK_SRC				161
+#define GCC_UFS_PHY_RX_SYMBOL_1_CLK				162
+#define GCC_UFS_PHY_RX_SYMBOL_1_CLK_SRC				163
+#define GCC_UFS_PHY_TX_SYMBOL_0_CLK				164
+#define GCC_UFS_PHY_TX_SYMBOL_0_CLK_SRC				165
+#define GCC_UFS_PHY_UNIPRO_CORE_CLK				166
+#define GCC_UFS_PHY_UNIPRO_CORE_CLK_SRC				167
+#define GCC_UFS_PHY_UNIPRO_CORE_HW_CTL_CLK			168
+#define GCC_USB30_PRIM_MASTER_CLK				169
+#define GCC_USB30_PRIM_MASTER_CLK_SRC				170
+#define GCC_USB30_PRIM_MOCK_UTMI_CLK				171
+#define GCC_USB30_PRIM_MOCK_UTMI_CLK_SRC			172
+#define GCC_USB30_PRIM_MOCK_UTMI_POSTDIV_CLK_SRC		173
+#define GCC_USB30_PRIM_SLEEP_CLK				174
+#define GCC_USB3_0_CLKREF_EN					175
+#define GCC_USB3_PRIM_PHY_AUX_CLK				176
+#define GCC_USB3_PRIM_PHY_AUX_CLK_SRC				177
+#define GCC_USB3_PRIM_PHY_COM_AUX_CLK				178
+#define GCC_USB3_PRIM_PHY_PIPE_CLK				179
+#define GCC_USB3_PRIM_PHY_PIPE_CLK_SRC				180
+#define GCC_VIDEO_AHB_CLK					181
+#define GCC_VIDEO_AXI0_CLK					182
+#define GCC_VIDEO_AXI1_CLK					183
+#define GCC_VIDEO_XO_CLK					184
+
+/* GCC resets */
+#define GCC_CAMERA_BCR						0
+#define GCC_DISPLAY_BCR						1
+#define GCC_GPU_BCR						2
+#define GCC_MMSS_BCR						3
+#define GCC_PCIE_0_BCR						4
+#define GCC_PCIE_0_LINK_DOWN_BCR				5
+#define GCC_PCIE_0_NOCSR_COM_PHY_BCR				6
+#define GCC_PCIE_0_PHY_BCR					7
+#define GCC_PCIE_0_PHY_NOCSR_COM_PHY_BCR			8
+#define GCC_PCIE_1_BCR						9
+#define GCC_PCIE_1_LINK_DOWN_BCR				10
+#define GCC_PCIE_1_NOCSR_COM_PHY_BCR				11
+#define GCC_PCIE_1_PHY_BCR					12
+#define GCC_PCIE_1_PHY_NOCSR_COM_PHY_BCR			13
+#define GCC_PCIE_PHY_BCR					14
+#define GCC_PCIE_PHY_CFG_AHB_BCR				15
+#define GCC_PCIE_PHY_COM_BCR					16
+#define GCC_PDM_BCR						17
+#define GCC_QUPV3_WRAPPER_0_BCR					18
+#define GCC_QUPV3_WRAPPER_1_BCR					19
+#define GCC_QUPV3_WRAPPER_2_BCR					20
+#define GCC_QUSB2PHY_PRIM_BCR					21
+#define GCC_QUSB2PHY_SEC_BCR					22
+#define GCC_SDCC2_BCR						23
+#define GCC_SDCC4_BCR						24
+#define GCC_UFS_PHY_BCR						25
+#define GCC_USB30_PRIM_BCR					26
+#define GCC_USB3_DP_PHY_PRIM_BCR				27
+#define GCC_USB3_DP_PHY_SEC_BCR					28
+#define GCC_USB3_PHY_PRIM_BCR					29
+#define GCC_USB3_PHY_SEC_BCR					30
+#define GCC_USB3PHY_PHY_PRIM_BCR				31
+#define GCC_USB3PHY_PHY_SEC_BCR					32
+#define GCC_USB_PHY_CFG_AHB2PHY_BCR				33
+#define GCC_VIDEO_AXI0_CLK_ARES					34
+#define GCC_VIDEO_AXI1_CLK_ARES					35
+#define GCC_VIDEO_BCR						36
+
+/* GCC power domains */
+#define PCIE_0_GDSC						0
+#define PCIE_1_GDSC						1
+#define UFS_PHY_GDSC						2
+#define USB30_PRIM_GDSC						3
+
+#endif
diff --git a/dts/include/dt-bindings/clock/r8a779f0-cpg-mssr.h b/dts/include/dt-bindings/clock/r8a779f0-cpg-mssr.h
new file mode 100644
index 0000000000..f2ae1c6a82
--- /dev/null
+++ b/dts/include/dt-bindings/clock/r8a779f0-cpg-mssr.h
@@ -0,0 +1,64 @@
+/* SPDX-License-Identifier: (GPL-2.0 or MIT) */
+/*
+ * Copyright (C) 2021 Renesas Electronics Corp.
+ */
+#ifndef __DT_BINDINGS_CLOCK_R8A779F0_CPG_MSSR_H__
+#define __DT_BINDINGS_CLOCK_R8A779F0_CPG_MSSR_H__
+
+#include <dt-bindings/clock/renesas-cpg-mssr.h>
+
+/* r8a779f0 CPG Core Clocks */
+
+#define R8A779F0_CLK_ZX			0
+#define R8A779F0_CLK_ZS			1
+#define R8A779F0_CLK_ZT			2
+#define R8A779F0_CLK_ZTR		3
+#define R8A779F0_CLK_S0D2		4
+#define R8A779F0_CLK_S0D3		5
+#define R8A779F0_CLK_S0D4		6
+#define R8A779F0_CLK_S0D2_MM		7
+#define R8A779F0_CLK_S0D3_MM		8
+#define R8A779F0_CLK_S0D4_MM		9
+#define R8A779F0_CLK_S0D2_RT		10
+#define R8A779F0_CLK_S0D3_RT		11
+#define R8A779F0_CLK_S0D4_RT		12
+#define R8A779F0_CLK_S0D6_RT		13
+#define R8A779F0_CLK_S0D3_PER		14
+#define R8A779F0_CLK_S0D6_PER		15
+#define R8A779F0_CLK_S0D12_PER		16
+#define R8A779F0_CLK_S0D24_PER		17
+#define R8A779F0_CLK_S0D2_HSC		18
+#define R8A779F0_CLK_S0D3_HSC		19
+#define R8A779F0_CLK_S0D4_HSC		20
+#define R8A779F0_CLK_S0D6_HSC		21
+#define R8A779F0_CLK_S0D12_HSC		22
+#define R8A779F0_CLK_S0D2_CC		23
+#define R8A779F0_CLK_CL			24
+#define R8A779F0_CLK_CL16M		25
+#define R8A779F0_CLK_CL16M_MM		26
+#define R8A779F0_CLK_CL16M_RT		27
+#define R8A779F0_CLK_CL16M_PER		28
+#define R8A779F0_CLK_CL16M_HSC		29
+#define R8A779F0_CLK_Z0			30
+#define R8A779F0_CLK_Z1			31
+#define R8A779F0_CLK_ZB3		32
+#define R8A779F0_CLK_ZB3D2		33
+#define R8A779F0_CLK_ZB3D4		34
+#define R8A779F0_CLK_SD0H		35
+#define R8A779F0_CLK_SD0		36
+#define R8A779F0_CLK_RPC		37
+#define R8A779F0_CLK_RPCD2		38
+#define R8A779F0_CLK_MSO		39
+#define R8A779F0_CLK_SASYNCRT		40
+#define R8A779F0_CLK_SASYNCPERD1	41
+#define R8A779F0_CLK_SASYNCPERD2	42
+#define R8A779F0_CLK_SASYNCPERD4	43
+#define R8A779F0_CLK_DBGSOC_HSC		44
+#define R8A779F0_CLK_RSW2		45
+#define R8A779F0_CLK_OSC		46
+#define R8A779F0_CLK_ZR			47
+#define R8A779F0_CLK_CPEX		48
+#define R8A779F0_CLK_CBFUSA		49
+#define R8A779F0_CLK_R			50
+
+#endif /* __DT_BINDINGS_CLOCK_R8A779F0_CPG_MSSR_H__ */
diff --git a/dts/include/dt-bindings/clock/starfive-jh7100.h b/dts/include/dt-bindings/clock/starfive-jh7100.h
new file mode 100644
index 0000000000..aa0863b972
--- /dev/null
+++ b/dts/include/dt-bindings/clock/starfive-jh7100.h
@@ -0,0 +1,202 @@
+/* SPDX-License-Identifier: GPL-2.0 OR MIT */
+/*
+ * Copyright (C) 2021 Ahmad Fatoum, Pengutronix
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_STARFIVE_JH7100_H__
+#define __DT_BINDINGS_CLOCK_STARFIVE_JH7100_H__
+
+#define JH7100_CLK_CPUNDBUS_ROOT	0
+#define JH7100_CLK_DLA_ROOT		1
+#define JH7100_CLK_DSP_ROOT		2
+#define JH7100_CLK_GMACUSB_ROOT		3
+#define JH7100_CLK_PERH0_ROOT		4
+#define JH7100_CLK_PERH1_ROOT		5
+#define JH7100_CLK_VIN_ROOT		6
+#define JH7100_CLK_VOUT_ROOT		7
+#define JH7100_CLK_AUDIO_ROOT		8
+#define JH7100_CLK_CDECHIFI4_ROOT	9
+#define JH7100_CLK_CDEC_ROOT		10
+#define JH7100_CLK_VOUTBUS_ROOT		11
+#define JH7100_CLK_CPUNBUS_ROOT_DIV	12
+#define JH7100_CLK_DSP_ROOT_DIV		13
+#define JH7100_CLK_PERH0_SRC		14
+#define JH7100_CLK_PERH1_SRC		15
+#define JH7100_CLK_PLL0_TESTOUT		16
+#define JH7100_CLK_PLL1_TESTOUT		17
+#define JH7100_CLK_PLL2_TESTOUT		18
+#define JH7100_CLK_PLL2_REF		19
+#define JH7100_CLK_CPU_CORE		20
+#define JH7100_CLK_CPU_AXI		21
+#define JH7100_CLK_AHB_BUS		22
+#define JH7100_CLK_APB1_BUS		23
+#define JH7100_CLK_APB2_BUS		24
+#define JH7100_CLK_DOM3AHB_BUS		25
+#define JH7100_CLK_DOM7AHB_BUS		26
+#define JH7100_CLK_U74_CORE0		27
+#define JH7100_CLK_U74_CORE1		28
+#define JH7100_CLK_U74_AXI		29
+#define JH7100_CLK_U74RTC_TOGGLE	30
+#define JH7100_CLK_SGDMA2P_AXI		31
+#define JH7100_CLK_DMA2PNOC_AXI		32
+#define JH7100_CLK_SGDMA2P_AHB		33
+#define JH7100_CLK_DLA_BUS		34
+#define JH7100_CLK_DLA_AXI		35
+#define JH7100_CLK_DLANOC_AXI		36
+#define JH7100_CLK_DLA_APB		37
+#define JH7100_CLK_VP6_CORE		38
+#define JH7100_CLK_VP6BUS_SRC		39
+#define JH7100_CLK_VP6_AXI		40
+#define JH7100_CLK_VCDECBUS_SRC		41
+#define JH7100_CLK_VDEC_BUS		42
+#define JH7100_CLK_VDEC_AXI		43
+#define JH7100_CLK_VDECBRG_MAIN		44
+#define JH7100_CLK_VDEC_BCLK		45
+#define JH7100_CLK_VDEC_CCLK		46
+#define JH7100_CLK_VDEC_APB		47
+#define JH7100_CLK_JPEG_AXI		48
+#define JH7100_CLK_JPEG_CCLK		49
+#define JH7100_CLK_JPEG_APB		50
+#define JH7100_CLK_GC300_2X		51
+#define JH7100_CLK_GC300_AHB		52
+#define JH7100_CLK_JPCGC300_AXIBUS	53
+#define JH7100_CLK_GC300_AXI		54
+#define JH7100_CLK_JPCGC300_MAIN	55
+#define JH7100_CLK_VENC_BUS		56
+#define JH7100_CLK_VENC_AXI		57
+#define JH7100_CLK_VENCBRG_MAIN		58
+#define JH7100_CLK_VENC_BCLK		59
+#define JH7100_CLK_VENC_CCLK		60
+#define JH7100_CLK_VENC_APB		61
+#define JH7100_CLK_DDRPLL_DIV2		62
+#define JH7100_CLK_DDRPLL_DIV4		63
+#define JH7100_CLK_DDRPLL_DIV8		64
+#define JH7100_CLK_DDROSC_DIV2		65
+#define JH7100_CLK_DDRC0		66
+#define JH7100_CLK_DDRC1		67
+#define JH7100_CLK_DDRPHY_APB		68
+#define JH7100_CLK_NOC_ROB		69
+#define JH7100_CLK_NOC_COG		70
+#define JH7100_CLK_NNE_AHB		71
+#define JH7100_CLK_NNEBUS_SRC1		72
+#define JH7100_CLK_NNE_BUS		73
+#define JH7100_CLK_NNE_AXI		74
+#define JH7100_CLK_NNENOC_AXI		75
+#define JH7100_CLK_DLASLV_AXI		76
+#define JH7100_CLK_DSPX2C_AXI		77
+#define JH7100_CLK_HIFI4_SRC		78
+#define JH7100_CLK_HIFI4_COREFREE	79
+#define JH7100_CLK_HIFI4_CORE		80
+#define JH7100_CLK_HIFI4_BUS		81
+#define JH7100_CLK_HIFI4_AXI		82
+#define JH7100_CLK_HIFI4NOC_AXI		83
+#define JH7100_CLK_SGDMA1P_BUS		84
+#define JH7100_CLK_SGDMA1P_AXI		85
+#define JH7100_CLK_DMA1P_AXI		86
+#define JH7100_CLK_X2C_AXI		87
+#define JH7100_CLK_USB_BUS		88
+#define JH7100_CLK_USB_AXI		89
+#define JH7100_CLK_USBNOC_AXI		90
+#define JH7100_CLK_USBPHY_ROOTDIV	91
+#define JH7100_CLK_USBPHY_125M		92
+#define JH7100_CLK_USBPHY_PLLDIV25M	93
+#define JH7100_CLK_USBPHY_25M		94
+#define JH7100_CLK_AUDIO_DIV		95
+#define JH7100_CLK_AUDIO_SRC		96
+#define JH7100_CLK_AUDIO_12288		97
+#define JH7100_CLK_VIN_SRC		98
+#define JH7100_CLK_ISP0_BUS		99
+#define JH7100_CLK_ISP0_AXI		100
+#define JH7100_CLK_ISP0NOC_AXI		101
+#define JH7100_CLK_ISPSLV_AXI		102
+#define JH7100_CLK_ISP1_BUS		103
+#define JH7100_CLK_ISP1_AXI		104
+#define JH7100_CLK_ISP1NOC_AXI		105
+#define JH7100_CLK_VIN_BUS		106
+#define JH7100_CLK_VIN_AXI		107
+#define JH7100_CLK_VINNOC_AXI		108
+#define JH7100_CLK_VOUT_SRC		109
+#define JH7100_CLK_DISPBUS_SRC		110
+#define JH7100_CLK_DISP_BUS		111
+#define JH7100_CLK_DISP_AXI		112
+#define JH7100_CLK_DISPNOC_AXI		113
+#define JH7100_CLK_SDIO0_AHB		114
+#define JH7100_CLK_SDIO0_CCLKINT	115
+#define JH7100_CLK_SDIO0_CCLKINT_INV	116
+#define JH7100_CLK_SDIO1_AHB		117
+#define JH7100_CLK_SDIO1_CCLKINT	118
+#define JH7100_CLK_SDIO1_CCLKINT_INV	119
+#define JH7100_CLK_GMAC_AHB		120
+#define JH7100_CLK_GMAC_ROOT_DIV	121
+#define JH7100_CLK_GMAC_PTP_REF		122
+#define JH7100_CLK_GMAC_GTX		123
+#define JH7100_CLK_GMAC_RMII_TX		124
+#define JH7100_CLK_GMAC_RMII_RX		125
+#define JH7100_CLK_GMAC_TX		126
+#define JH7100_CLK_GMAC_TX_INV		127
+#define JH7100_CLK_GMAC_RX_PRE		128
+#define JH7100_CLK_GMAC_RX_INV		129
+#define JH7100_CLK_GMAC_RMII		130
+#define JH7100_CLK_GMAC_TOPHYREF	131
+#define JH7100_CLK_SPI2AHB_AHB		132
+#define JH7100_CLK_SPI2AHB_CORE		133
+#define JH7100_CLK_EZMASTER_AHB		134
+#define JH7100_CLK_E24_AHB		135
+#define JH7100_CLK_E24RTC_TOGGLE	136
+#define JH7100_CLK_QSPI_AHB		137
+#define JH7100_CLK_QSPI_APB		138
+#define JH7100_CLK_QSPI_REF		139
+#define JH7100_CLK_SEC_AHB		140
+#define JH7100_CLK_AES			141
+#define JH7100_CLK_SHA			142
+#define JH7100_CLK_PKA			143
+#define JH7100_CLK_TRNG_APB		144
+#define JH7100_CLK_OTP_APB		145
+#define JH7100_CLK_UART0_APB		146
+#define JH7100_CLK_UART0_CORE		147
+#define JH7100_CLK_UART1_APB		148
+#define JH7100_CLK_UART1_CORE		149
+#define JH7100_CLK_SPI0_APB		150
+#define JH7100_CLK_SPI0_CORE		151
+#define JH7100_CLK_SPI1_APB		152
+#define JH7100_CLK_SPI1_CORE		153
+#define JH7100_CLK_I2C0_APB		154
+#define JH7100_CLK_I2C0_CORE		155
+#define JH7100_CLK_I2C1_APB		156
+#define JH7100_CLK_I2C1_CORE		157
+#define JH7100_CLK_GPIO_APB		158
+#define JH7100_CLK_UART2_APB		159
+#define JH7100_CLK_UART2_CORE		160
+#define JH7100_CLK_UART3_APB		161
+#define JH7100_CLK_UART3_CORE		162
+#define JH7100_CLK_SPI2_APB		163
+#define JH7100_CLK_SPI2_CORE		164
+#define JH7100_CLK_SPI3_APB		165
+#define JH7100_CLK_SPI3_CORE		166
+#define JH7100_CLK_I2C2_APB		167
+#define JH7100_CLK_I2C2_CORE		168
+#define JH7100_CLK_I2C3_APB		169
+#define JH7100_CLK_I2C3_CORE		170
+#define JH7100_CLK_WDTIMER_APB		171
+#define JH7100_CLK_WDT_CORE		172
+#define JH7100_CLK_TIMER0_CORE		173
+#define JH7100_CLK_TIMER1_CORE		174
+#define JH7100_CLK_TIMER2_CORE		175
+#define JH7100_CLK_TIMER3_CORE		176
+#define JH7100_CLK_TIMER4_CORE		177
+#define JH7100_CLK_TIMER5_CORE		178
+#define JH7100_CLK_TIMER6_CORE		179
+#define JH7100_CLK_VP6INTC_APB		180
+#define JH7100_CLK_PWM_APB		181
+#define JH7100_CLK_MSI_APB		182
+#define JH7100_CLK_TEMP_APB		183
+#define JH7100_CLK_TEMP_SENSE		184
+#define JH7100_CLK_SYSERR_APB		185
+
+#define JH7100_CLK_PLL0_OUT		186
+#define JH7100_CLK_PLL1_OUT		187
+#define JH7100_CLK_PLL2_OUT		188
+
+#define JH7100_CLK_END			189
+
+#endif /* __DT_BINDINGS_CLOCK_STARFIVE_JH7100_H__ */
diff --git a/dts/include/dt-bindings/clock/sun20i-d1-ccu.h b/dts/include/dt-bindings/clock/sun20i-d1-ccu.h
new file mode 100644
index 0000000000..e3ac53315e
--- /dev/null
+++ b/dts/include/dt-bindings/clock/sun20i-d1-ccu.h
@@ -0,0 +1,156 @@
+/* SPDX-License-Identifier: (GPL-2.0+ or MIT) */
+/*
+ * Copyright (C) 2020 huangzhenwei@allwinnertech.com
+ * Copyright (C) 2021 Samuel Holland <samuel@sholland.org>
+ */
+
+#ifndef _DT_BINDINGS_CLK_SUN20I_D1_CCU_H_
+#define _DT_BINDINGS_CLK_SUN20I_D1_CCU_H_
+
+#define CLK_PLL_CPUX		0
+#define CLK_PLL_DDR0		1
+#define CLK_PLL_PERIPH0_4X	2
+#define CLK_PLL_PERIPH0_2X	3
+#define CLK_PLL_PERIPH0_800M	4
+#define CLK_PLL_PERIPH0		5
+#define CLK_PLL_PERIPH0_DIV3	6
+#define CLK_PLL_VIDEO0_4X	7
+#define CLK_PLL_VIDEO0_2X	8
+#define CLK_PLL_VIDEO0		9
+#define CLK_PLL_VIDEO1_4X	10
+#define CLK_PLL_VIDEO1_2X	11
+#define CLK_PLL_VIDEO1		12
+#define CLK_PLL_VE		13
+#define CLK_PLL_AUDIO0_4X	14
+#define CLK_PLL_AUDIO0_2X	15
+#define CLK_PLL_AUDIO0		16
+#define CLK_PLL_AUDIO1		17
+#define CLK_PLL_AUDIO1_DIV2	18
+#define CLK_PLL_AUDIO1_DIV5	19
+#define CLK_CPUX		20
+#define CLK_CPUX_AXI		21
+#define CLK_CPUX_APB		22
+#define CLK_PSI_AHB		23
+#define CLK_APB0		24
+#define CLK_APB1		25
+#define CLK_MBUS		26
+#define CLK_DE			27
+#define CLK_BUS_DE		28
+#define CLK_DI			29
+#define CLK_BUS_DI		30
+#define CLK_G2D			31
+#define CLK_BUS_G2D		32
+#define CLK_CE			33
+#define CLK_BUS_CE		34
+#define CLK_VE			35
+#define CLK_BUS_VE		36
+#define CLK_BUS_DMA		37
+#define CLK_BUS_MSGBOX0		38
+#define CLK_BUS_MSGBOX1		39
+#define CLK_BUS_MSGBOX2		40
+#define CLK_BUS_SPINLOCK	41
+#define CLK_BUS_HSTIMER		42
+#define CLK_AVS			43
+#define CLK_BUS_DBG		44
+#define CLK_BUS_PWM		45
+#define CLK_BUS_IOMMU		46
+#define CLK_DRAM		47
+#define CLK_MBUS_DMA		48
+#define CLK_MBUS_VE		49
+#define CLK_MBUS_CE		50
+#define CLK_MBUS_TVIN		51
+#define CLK_MBUS_CSI		52
+#define CLK_MBUS_G2D		53
+#define CLK_MBUS_RISCV		54
+#define CLK_BUS_DRAM		55
+#define CLK_MMC0		56
+#define CLK_MMC1		57
+#define CLK_MMC2		58
+#define CLK_BUS_MMC0		59
+#define CLK_BUS_MMC1		60
+#define CLK_BUS_MMC2		61
+#define CLK_BUS_UART0		62
+#define CLK_BUS_UART1		63
+#define CLK_BUS_UART2		64
+#define CLK_BUS_UART3		65
+#define CLK_BUS_UART4		66
+#define CLK_BUS_UART5		67
+#define CLK_BUS_I2C0		68
+#define CLK_BUS_I2C1		69
+#define CLK_BUS_I2C2		70
+#define CLK_BUS_I2C3		71
+#define CLK_SPI0		72
+#define CLK_SPI1		73
+#define CLK_BUS_SPI0		74
+#define CLK_BUS_SPI1		75
+#define CLK_EMAC_25M		76
+#define CLK_BUS_EMAC		77
+#define CLK_IR_TX		78
+#define CLK_BUS_IR_TX		79
+#define CLK_BUS_GPADC		80
+#define CLK_BUS_THS		81
+#define CLK_I2S0		82
+#define CLK_I2S1		83
+#define CLK_I2S2		84
+#define CLK_I2S2_ASRC		85
+#define CLK_BUS_I2S0		86
+#define CLK_BUS_I2S1		87
+#define CLK_BUS_I2S2		88
+#define CLK_SPDIF_TX		89
+#define CLK_SPDIF_RX		90
+#define CLK_BUS_SPDIF		91
+#define CLK_DMIC		92
+#define CLK_BUS_DMIC		93
+#define CLK_AUDIO_DAC		94
+#define CLK_AUDIO_ADC		95
+#define CLK_BUS_AUDIO		96
+#define CLK_USB_OHCI0		97
+#define CLK_USB_OHCI1		98
+#define CLK_BUS_OHCI0		99
+#define CLK_BUS_OHCI1		100
+#define CLK_BUS_EHCI0		101
+#define CLK_BUS_EHCI1		102
+#define CLK_BUS_OTG		103
+#define CLK_BUS_LRADC		104
+#define CLK_BUS_DPSS_TOP	105
+#define CLK_HDMI_24M		106
+#define CLK_HDMI_CEC_32K	107
+#define CLK_HDMI_CEC		108
+#define CLK_BUS_HDMI		109
+#define CLK_MIPI_DSI		110
+#define CLK_BUS_MIPI_DSI	111
+#define CLK_TCON_LCD0		112
+#define CLK_BUS_TCON_LCD0	113
+#define CLK_TCON_TV		114
+#define CLK_BUS_TCON_TV		115
+#define CLK_TVE			116
+#define CLK_BUS_TVE_TOP		117
+#define CLK_BUS_TVE		118
+#define CLK_TVD			119
+#define CLK_BUS_TVD_TOP		120
+#define CLK_BUS_TVD		121
+#define CLK_LEDC		122
+#define CLK_BUS_LEDC		123
+#define CLK_CSI_TOP		124
+#define CLK_CSI_MCLK		125
+#define CLK_BUS_CSI		126
+#define CLK_TPADC		127
+#define CLK_BUS_TPADC		128
+#define CLK_BUS_TZMA		129
+#define CLK_DSP			130
+#define CLK_BUS_DSP_CFG		131
+#define CLK_RISCV		132
+#define CLK_RISCV_AXI		133
+#define CLK_BUS_RISCV_CFG	134
+#define CLK_FANOUT_24M		135
+#define CLK_FANOUT_12M		136
+#define CLK_FANOUT_16M		137
+#define CLK_FANOUT_25M		138
+#define CLK_FANOUT_32K		139
+#define CLK_FANOUT_27M		140
+#define CLK_FANOUT_PCLK		141
+#define CLK_FANOUT0		142
+#define CLK_FANOUT1		143
+#define CLK_FANOUT2		144
+
+#endif /* _DT_BINDINGS_CLK_SUN20I_D1_CCU_H_ */
diff --git a/dts/include/dt-bindings/clock/sun20i-d1-r-ccu.h b/dts/include/dt-bindings/clock/sun20i-d1-r-ccu.h
new file mode 100644
index 0000000000..4c2697fd32
--- /dev/null
+++ b/dts/include/dt-bindings/clock/sun20i-d1-r-ccu.h
@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: (GPL-2.0+ or MIT) */
+/*
+ * Copyright (C) 2021 Samuel Holland <samuel@sholland.org>
+ */
+
+#ifndef _DT_BINDINGS_CLK_SUN20I_D1_R_CCU_H_
+#define _DT_BINDINGS_CLK_SUN20I_D1_R_CCU_H_
+
+#define CLK_R_AHB		0
+
+#define CLK_BUS_R_TIMER		2
+#define CLK_BUS_R_TWD		3
+#define CLK_BUS_R_PPU		4
+#define CLK_R_IR_RX		5
+#define CLK_BUS_R_IR_RX		6
+#define CLK_BUS_R_RTC		7
+#define CLK_BUS_R_CPUCFG	8
+
+#endif /* _DT_BINDINGS_CLK_SUN20I_D1_R_CCU_H_ */
diff --git a/dts/include/dt-bindings/clock/sun50i-a64-ccu.h b/dts/include/dt-bindings/clock/sun50i-a64-ccu.h
index 318eb15c41..175892189e 100644
--- a/dts/include/dt-bindings/clock/sun50i-a64-ccu.h
+++ b/dts/include/dt-bindings/clock/sun50i-a64-ccu.h
@@ -113,7 +113,7 @@
 #define CLK_USB_OHCI0		91
 
 #define CLK_USB_OHCI1		93
-
+#define CLK_DRAM		94
 #define CLK_DRAM_VE		95
 #define CLK_DRAM_CSI		96
 #define CLK_DRAM_DEINTERLACE	97
diff --git a/dts/include/dt-bindings/clock/sun8i-h3-ccu.h b/dts/include/dt-bindings/clock/sun8i-h3-ccu.h
index 30d2d15373..5d4ada2c22 100644
--- a/dts/include/dt-bindings/clock/sun8i-h3-ccu.h
+++ b/dts/include/dt-bindings/clock/sun8i-h3-ccu.h
@@ -126,7 +126,7 @@
 #define CLK_USB_OHCI1		93
 #define CLK_USB_OHCI2		94
 #define CLK_USB_OHCI3		95
-
+#define CLK_DRAM		96
 #define CLK_DRAM_VE		97
 #define CLK_DRAM_CSI		98
 #define CLK_DRAM_DEINTERLACE	99
diff --git a/dts/include/dt-bindings/clock/tegra234-clock.h b/dts/include/dt-bindings/clock/tegra234-clock.h
index 2c82072950..8d7e66e1b6 100644
--- a/dts/include/dt-bindings/clock/tegra234-clock.h
+++ b/dts/include/dt-bindings/clock/tegra234-clock.h
@@ -4,11 +4,31 @@
 #ifndef DT_BINDINGS_CLOCK_TEGRA234_CLOCK_H
 #define DT_BINDINGS_CLOCK_TEGRA234_CLOCK_H
 
+/**
+ * @file
+ * @defgroup bpmp_clock_ids Clock ID's
+ * @{
+ */
+/**
+ * @brief controls the EMC clock frequency.
+ * @details Doing a clk_set_rate on this clock will select the
+ * appropriate clock source, program the source rate and execute a
+ * specific sequence to switch to the new clock source for both memory
+ * controllers. This can be used to control the balance between memory
+ * throughput and memory controller power.
+ */
+#define TEGRA234_CLK_EMC			31U
 /** @brief output of gate CLK_ENB_FUSE */
-#define TEGRA234_CLK_FUSE			40
+#define TEGRA234_CLK_FUSE			40U
 /** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_SDMMC4 */
-#define TEGRA234_CLK_SDMMC4			123
+#define TEGRA234_CLK_SDMMC4			123U
 /** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_UARTA */
-#define TEGRA234_CLK_UARTA			155
+#define TEGRA234_CLK_UARTA			155U
+/** @brief CLK_RST_CONTROLLER_CLK_SOURCE_SDMMC_LEGACY_TM switch divider output */
+#define TEGRA234_CLK_SDMMC_LEGACY_TM		219U
+/** @brief PLL controlled by CLK_RST_CONTROLLER_PLLC4_BASE */
+#define TEGRA234_CLK_PLLC4			237U
+/** @brief 32K input clock provided by PMIC */
+#define TEGRA234_CLK_CLK_32K			289U
 
 #endif
diff --git a/dts/include/dt-bindings/clock/toshiba,tmpv770x.h b/dts/include/dt-bindings/clock/toshiba,tmpv770x.h
new file mode 100644
index 0000000000..5fce713001
--- /dev/null
+++ b/dts/include/dt-bindings/clock/toshiba,tmpv770x.h
@@ -0,0 +1,181 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+
+#ifndef _DT_BINDINGS_CLOCK_TOSHIBA_TMPV770X_H_
+#define _DT_BINDINGS_CLOCK_TOSHIBA_TMPV770X_H_
+
+/* PLL */
+#define TMPV770X_PLL_PIPLL0		0
+#define TMPV770X_PLL_PIPLL1		1
+#define TMPV770X_PLL_PIDNNPLL		2
+#define TMPV770X_PLL_PIETHERPLL		3
+#define TMPV770X_PLL_PIDDRCPLL		4
+#define TMPV770X_PLL_PIVOIFPLL		5
+#define TMPV770X_PLL_PIIMGERPLL		6
+#define TMPV770X_NR_PLL		7
+
+/* Clocks */
+#define TMPV770X_CLK_PIPLL1_DIV1	0
+#define TMPV770X_CLK_PIPLL1_DIV2	1
+#define TMPV770X_CLK_PIPLL1_DIV4	2
+#define TMPV770X_CLK_PIDNNPLL_DIV1	3
+#define TMPV770X_CLK_DDRC_PHY_PLL0	4
+#define TMPV770X_CLK_DDRC_PHY_PLL1	5
+#define TMPV770X_CLK_D_PHYPLL		6
+#define TMPV770X_CLK_PHY_PCIEPLL	7
+#define TMPV770X_CLK_CA53CL0		8
+#define TMPV770X_CLK_CA53CL1		9
+#define TMPV770X_CLK_PISDMAC		10
+#define TMPV770X_CLK_PIPDMAC0		11
+#define TMPV770X_CLK_PIPDMAC1		12
+#define TMPV770X_CLK_PIWRAM		13
+#define TMPV770X_CLK_DDRC0		14
+#define TMPV770X_CLK_DDRC0_SCLK		15
+#define TMPV770X_CLK_DDRC0_NCLK		16
+#define TMPV770X_CLK_DDRC0_MCLK		17
+#define TMPV770X_CLK_DDRC0_APBCLK	18
+#define TMPV770X_CLK_DDRC1		19
+#define TMPV770X_CLK_DDRC1_SCLK		20
+#define TMPV770X_CLK_DDRC1_NCLK		21
+#define TMPV770X_CLK_DDRC1_MCLK		22
+#define TMPV770X_CLK_DDRC1_APBCLK	23
+#define TMPV770X_CLK_HOX		24
+#define TMPV770X_CLK_PCIE_MSTR		25
+#define TMPV770X_CLK_PCIE_AUX		26
+#define TMPV770X_CLK_PIINTC		27
+#define TMPV770X_CLK_PIETHER_BUS	28
+#define TMPV770X_CLK_PISPI0		29
+#define TMPV770X_CLK_PISPI1		30
+#define TMPV770X_CLK_PISPI2		31
+#define TMPV770X_CLK_PISPI3		32
+#define TMPV770X_CLK_PISPI4		33
+#define TMPV770X_CLK_PISPI5		34
+#define TMPV770X_CLK_PISPI6		35
+#define TMPV770X_CLK_PIUART0		36
+#define TMPV770X_CLK_PIUART1		37
+#define TMPV770X_CLK_PIUART2		38
+#define TMPV770X_CLK_PIUART3		39
+#define TMPV770X_CLK_PII2C0		40
+#define TMPV770X_CLK_PII2C1		41
+#define TMPV770X_CLK_PII2C2		42
+#define TMPV770X_CLK_PII2C3		43
+#define TMPV770X_CLK_PII2C4		44
+#define TMPV770X_CLK_PII2C5		45
+#define TMPV770X_CLK_PII2C6		46
+#define TMPV770X_CLK_PII2C7		47
+#define TMPV770X_CLK_PII2C8		48
+#define TMPV770X_CLK_PIGPIO		49
+#define TMPV770X_CLK_PIPGM		50
+#define TMPV770X_CLK_PIPCMIF		51
+#define TMPV770X_CLK_PIPCMIF_AUDIO_O	52
+#define TMPV770X_CLK_PIPCMIF_AUDIO_I	53
+#define TMPV770X_CLK_PICMPT0		54
+#define TMPV770X_CLK_PICMPT1		55
+#define TMPV770X_CLK_PITSC		56
+#define TMPV770X_CLK_PIUWDT		57
+#define TMPV770X_CLK_PISWDT		58
+#define TMPV770X_CLK_WDTCLK		59
+#define TMPV770X_CLK_PISUBUS_150M	60
+#define TMPV770X_CLK_PISUBUS_300M	61
+#define TMPV770X_CLK_PIPMU		62
+#define TMPV770X_CLK_PIGPMU		63
+#define TMPV770X_CLK_PITMU		64
+#define TMPV770X_CLK_WRCK		65
+#define TMPV770X_CLK_PIEMM		66
+#define TMPV770X_CLK_PIMISC		67
+#define TMPV770X_CLK_PIGCOMM		68
+#define TMPV770X_CLK_PIDCOMM		69
+#define TMPV770X_CLK_PICKMON		70
+#define TMPV770X_CLK_PIMBUS		71
+#define TMPV770X_CLK_SBUSCLK		72
+#define TMPV770X_CLK_DDR0_APBCLKCLK	73
+#define TMPV770X_CLK_DDR1_APBCLKCLK	74
+#define TMPV770X_CLK_DSP0_PBCLK		75
+#define TMPV770X_CLK_DSP1_PBCLK		76
+#define TMPV770X_CLK_DSP2_PBCLK		77
+#define TMPV770X_CLK_DSP3_PBCLK		78
+#define TMPV770X_CLK_DSVIIF0_APBCLK	79
+#define TMPV770X_CLK_VIIF0_APBCLK	80
+#define TMPV770X_CLK_VIIF0_CFGCLK	81
+#define TMPV770X_CLK_VIIF1_APBCLK	82
+#define TMPV770X_CLK_VIIF1_CFGCLK	83
+#define TMPV770X_CLK_VIIF2_APBCLK	84
+#define TMPV770X_CLK_VIIF2_CFGCLK	85
+#define TMPV770X_CLK_VIIF3_APBCLK	86
+#define TMPV770X_CLK_VIIF3_CFGCLK	87
+#define TMPV770X_CLK_VIIF4_APBCLK	88
+#define TMPV770X_CLK_VIIF4_CFGCLK	89
+#define TMPV770X_CLK_VIIF5_APBCLK	90
+#define TMPV770X_CLK_VIIF5_CFGCLK	91
+#define TMPV770X_CLK_VOIF_SBUSCLK	92
+#define TMPV770X_CLK_VOIF_PROCCLK	93
+#define TMPV770X_CLK_VOIF_DPHYCFGCLK	94
+#define TMPV770X_CLK_DNN0		95
+#define TMPV770X_CLK_STMAT		96
+#define TMPV770X_CLK_HWA0		97
+#define TMPV770X_CLK_AFFINE0		98
+#define TMPV770X_CLK_HAMAT		99
+#define TMPV770X_CLK_SMLDB		100
+#define TMPV770X_CLK_HWA0_ASYNC		101
+#define TMPV770X_CLK_HWA2		102
+#define TMPV770X_CLK_FLMAT		103
+#define TMPV770X_CLK_PYRAMID		104
+#define TMPV770X_CLK_HWA2_ASYNC		105
+#define TMPV770X_CLK_DSP0		106
+#define TMPV770X_CLK_VIIFBS0		107
+#define TMPV770X_CLK_VIIFBS0_L2ISP	108
+#define TMPV770X_CLK_VIIFBS0_L1ISP	109
+#define TMPV770X_CLK_VIIFBS0_PROC	110
+#define TMPV770X_CLK_VIIFBS1		111
+#define TMPV770X_CLK_VIIFBS2		112
+#define TMPV770X_CLK_VIIFOP_MBUS	113
+#define TMPV770X_CLK_VIIFOP0_PROC	114
+#define TMPV770X_CLK_PIETHER_2P5M	115
+#define TMPV770X_CLK_PIETHER_25M	116
+#define TMPV770X_CLK_PIETHER_50M	117
+#define TMPV770X_CLK_PIETHER_125M	118
+#define TMPV770X_CLK_VOIF0_DPHYCFG	119
+#define TMPV770X_CLK_VOIF0_PROC		120
+#define TMPV770X_CLK_VOIF0_SBUS		121
+#define TMPV770X_CLK_VOIF0_DSIREF	122
+#define TMPV770X_CLK_VOIF0_PIXEL	123
+#define TMPV770X_CLK_PIREFCLK		124
+#define TMPV770X_CLK_SBUS		125
+#define TMPV770X_CLK_BUSLCK		126
+#define TMPV770X_NR_CLK			127
+
+/* Reset */
+#define TMPV770X_RESET_PIETHER_2P5M	0
+#define TMPV770X_RESET_PIETHER_25M	1
+#define TMPV770X_RESET_PIETHER_50M	2
+#define TMPV770X_RESET_PIETHER_125M	3
+#define TMPV770X_RESET_HOX		4
+#define TMPV770X_RESET_PCIE_MSTR	5
+#define TMPV770X_RESET_PCIE_AUX		6
+#define TMPV770X_RESET_PIINTC		7
+#define TMPV770X_RESET_PIETHER_BUS	8
+#define TMPV770X_RESET_PISPI0		9
+#define TMPV770X_RESET_PISPI1		10
+#define TMPV770X_RESET_PISPI2		11
+#define TMPV770X_RESET_PISPI3		12
+#define TMPV770X_RESET_PISPI4		13
+#define TMPV770X_RESET_PISPI5		14
+#define TMPV770X_RESET_PISPI6		15
+#define TMPV770X_RESET_PIUART0		16
+#define TMPV770X_RESET_PIUART1		17
+#define TMPV770X_RESET_PIUART2		18
+#define TMPV770X_RESET_PIUART3		19
+#define TMPV770X_RESET_PII2C0		20
+#define TMPV770X_RESET_PII2C1		21
+#define TMPV770X_RESET_PII2C2		22
+#define TMPV770X_RESET_PII2C3		23
+#define TMPV770X_RESET_PII2C4		24
+#define TMPV770X_RESET_PII2C5		25
+#define TMPV770X_RESET_PII2C6		26
+#define TMPV770X_RESET_PII2C7		27
+#define TMPV770X_RESET_PII2C8		28
+#define TMPV770X_RESET_PIPCMIF		29
+#define TMPV770X_RESET_PICKMON		30
+#define TMPV770X_RESET_SBUSCLK		31
+#define TMPV770X_NR_RESET		32
+
+#endif /*_DT_BINDINGS_CLOCK_TOSHIBA_TMPV770X_H_ */
diff --git a/dts/include/dt-bindings/gpio/msc313-gpio.h b/dts/include/dt-bindings/gpio/msc313-gpio.h
index 2dd56683d3..5458c6580a 100644
--- a/dts/include/dt-bindings/gpio/msc313-gpio.h
+++ b/dts/include/dt-bindings/gpio/msc313-gpio.h
@@ -50,4 +50,75 @@
 #define MSC313_GPIO_SPI0_DI	(MSC313_GPIO_SPI0 + 2)
 #define MSC313_GPIO_SPI0_DO	(MSC313_GPIO_SPI0 + 3)
 
+/* SSD20x */
+#define SSD20XD_GPIO_FUART	0
+#define SSD20XD_GPIO_FUART_RX	(SSD20XD_GPIO_FUART + 0)
+#define SSD20XD_GPIO_FUART_TX	(SSD20XD_GPIO_FUART + 1)
+#define SSD20XD_GPIO_FUART_CTS	(SSD20XD_GPIO_FUART + 2)
+#define SSD20XD_GPIO_FUART_RTS	(SSD20XD_GPIO_FUART + 3)
+
+#define SSD20XD_GPIO_SD		(SSD20XD_GPIO_FUART_RTS + 1)
+#define SSD20XD_GPIO_SD_CLK	(SSD20XD_GPIO_SD + 0)
+#define SSD20XD_GPIO_SD_CMD	(SSD20XD_GPIO_SD + 1)
+#define SSD20XD_GPIO_SD_D0	(SSD20XD_GPIO_SD + 2)
+#define SSD20XD_GPIO_SD_D1	(SSD20XD_GPIO_SD + 3)
+#define SSD20XD_GPIO_SD_D2	(SSD20XD_GPIO_SD + 4)
+#define SSD20XD_GPIO_SD_D3	(SSD20XD_GPIO_SD + 5)
+
+#define SSD20XD_GPIO_UART0	(SSD20XD_GPIO_SD_D3 + 1)
+#define SSD20XD_GPIO_UART0_RX	(SSD20XD_GPIO_UART0 + 0)
+#define SSD20XD_GPIO_UART0_TX	(SSD20XD_GPIO_UART0 + 1)
+
+#define SSD20XD_GPIO_UART1	(SSD20XD_GPIO_UART0_TX + 1)
+#define SSD20XD_GPIO_UART1_RX	(SSD20XD_GPIO_UART1 + 0)
+#define SSD20XD_GPIO_UART1_TX	(SSD20XD_GPIO_UART1 + 1)
+
+#define SSD20XD_GPIO_TTL	(SSD20XD_GPIO_UART1_TX + 1)
+#define SSD20XD_GPIO_TTL0	(SSD20XD_GPIO_TTL + 0)
+#define SSD20XD_GPIO_TTL1	(SSD20XD_GPIO_TTL + 1)
+#define SSD20XD_GPIO_TTL2	(SSD20XD_GPIO_TTL + 2)
+#define SSD20XD_GPIO_TTL3	(SSD20XD_GPIO_TTL + 3)
+#define SSD20XD_GPIO_TTL4	(SSD20XD_GPIO_TTL + 4)
+#define SSD20XD_GPIO_TTL5	(SSD20XD_GPIO_TTL + 5)
+#define SSD20XD_GPIO_TTL6	(SSD20XD_GPIO_TTL + 6)
+#define SSD20XD_GPIO_TTL7	(SSD20XD_GPIO_TTL + 7)
+#define SSD20XD_GPIO_TTL8	(SSD20XD_GPIO_TTL + 8)
+#define SSD20XD_GPIO_TTL9	(SSD20XD_GPIO_TTL + 9)
+#define SSD20XD_GPIO_TTL10	(SSD20XD_GPIO_TTL + 10)
+#define SSD20XD_GPIO_TTL11	(SSD20XD_GPIO_TTL + 11)
+#define SSD20XD_GPIO_TTL12	(SSD20XD_GPIO_TTL + 12)
+#define SSD20XD_GPIO_TTL13	(SSD20XD_GPIO_TTL + 13)
+#define SSD20XD_GPIO_TTL14	(SSD20XD_GPIO_TTL + 14)
+#define SSD20XD_GPIO_TTL15	(SSD20XD_GPIO_TTL + 15)
+#define SSD20XD_GPIO_TTL16	(SSD20XD_GPIO_TTL + 16)
+#define SSD20XD_GPIO_TTL17	(SSD20XD_GPIO_TTL + 17)
+#define SSD20XD_GPIO_TTL18	(SSD20XD_GPIO_TTL + 18)
+#define SSD20XD_GPIO_TTL19	(SSD20XD_GPIO_TTL + 19)
+#define SSD20XD_GPIO_TTL20	(SSD20XD_GPIO_TTL + 20)
+#define SSD20XD_GPIO_TTL21	(SSD20XD_GPIO_TTL + 21)
+#define SSD20XD_GPIO_TTL22	(SSD20XD_GPIO_TTL + 22)
+#define SSD20XD_GPIO_TTL23	(SSD20XD_GPIO_TTL + 23)
+#define SSD20XD_GPIO_TTL24	(SSD20XD_GPIO_TTL + 24)
+#define SSD20XD_GPIO_TTL25	(SSD20XD_GPIO_TTL + 25)
+#define SSD20XD_GPIO_TTL26	(SSD20XD_GPIO_TTL + 26)
+#define SSD20XD_GPIO_TTL27	(SSD20XD_GPIO_TTL + 27)
+
+#define SSD20XD_GPIO_GPIO	(SSD20XD_GPIO_TTL27 + 1)
+#define SSD20XD_GPIO_GPIO0	(SSD20XD_GPIO_GPIO + 0)
+#define SSD20XD_GPIO_GPIO1	(SSD20XD_GPIO_GPIO + 1)
+#define SSD20XD_GPIO_GPIO2	(SSD20XD_GPIO_GPIO + 2)
+#define SSD20XD_GPIO_GPIO3	(SSD20XD_GPIO_GPIO + 3)
+#define SSD20XD_GPIO_GPIO4	(SSD20XD_GPIO_GPIO + 4)
+#define SSD20XD_GPIO_GPIO5	(SSD20XD_GPIO_GPIO + 5)
+#define SSD20XD_GPIO_GPIO6	(SSD20XD_GPIO_GPIO + 6)
+#define SSD20XD_GPIO_GPIO7	(SSD20XD_GPIO_GPIO + 7)
+#define SSD20XD_GPIO_GPIO10	(SSD20XD_GPIO_GPIO + 8)
+#define SSD20XD_GPIO_GPIO11	(SSD20XD_GPIO_GPIO + 9)
+#define SSD20XD_GPIO_GPIO12	(SSD20XD_GPIO_GPIO + 10)
+#define SSD20XD_GPIO_GPIO13	(SSD20XD_GPIO_GPIO + 11)
+#define SSD20XD_GPIO_GPIO14	(SSD20XD_GPIO_GPIO + 12)
+#define SSD20XD_GPIO_GPIO85	(SSD20XD_GPIO_GPIO + 13)
+#define SSD20XD_GPIO_GPIO86	(SSD20XD_GPIO_GPIO + 14)
+#define SSD20XD_GPIO_GPIO90	(SSD20XD_GPIO_GPIO + 15)
+
 #endif /* _DT_BINDINGS_MSC313_GPIO_H */
diff --git a/dts/include/dt-bindings/gpio/tegra234-gpio.h b/dts/include/dt-bindings/gpio/tegra234-gpio.h
new file mode 100644
index 0000000000..d7a1f2e298
--- /dev/null
+++ b/dts/include/dt-bindings/gpio/tegra234-gpio.h
@@ -0,0 +1,63 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright (c) 2020, NVIDIA CORPORATION. All rights reserved. */
+
+/*
+ * This header provides constants for binding nvidia,tegra234-gpio*.
+ *
+ * The first cell in Tegra's GPIO specifier is the GPIO ID. The macros below
+ * provide names for this.
+ *
+ * The second cell contains standard flag values specified in gpio.h.
+ */
+
+#ifndef _DT_BINDINGS_GPIO_TEGRA234_GPIO_H
+#define _DT_BINDINGS_GPIO_TEGRA234_GPIO_H
+
+#include <dt-bindings/gpio/gpio.h>
+
+/* GPIOs implemented by main GPIO controller */
+#define TEGRA234_MAIN_GPIO_PORT_A   0
+#define TEGRA234_MAIN_GPIO_PORT_B   1
+#define TEGRA234_MAIN_GPIO_PORT_C   2
+#define TEGRA234_MAIN_GPIO_PORT_D   3
+#define TEGRA234_MAIN_GPIO_PORT_E   4
+#define TEGRA234_MAIN_GPIO_PORT_F   5
+#define TEGRA234_MAIN_GPIO_PORT_G   6
+#define TEGRA234_MAIN_GPIO_PORT_H   7
+#define TEGRA234_MAIN_GPIO_PORT_I   8
+#define TEGRA234_MAIN_GPIO_PORT_J   9
+#define TEGRA234_MAIN_GPIO_PORT_K  10
+#define TEGRA234_MAIN_GPIO_PORT_L  11
+#define TEGRA234_MAIN_GPIO_PORT_M  12
+#define TEGRA234_MAIN_GPIO_PORT_N  13
+#define TEGRA234_MAIN_GPIO_PORT_P  14
+#define TEGRA234_MAIN_GPIO_PORT_Q  15
+#define TEGRA234_MAIN_GPIO_PORT_R  16
+#define TEGRA234_MAIN_GPIO_PORT_S  17
+#define TEGRA234_MAIN_GPIO_PORT_T  18
+#define TEGRA234_MAIN_GPIO_PORT_U  19
+#define TEGRA234_MAIN_GPIO_PORT_V  20
+#define TEGRA234_MAIN_GPIO_PORT_X  21
+#define TEGRA234_MAIN_GPIO_PORT_Y  22
+#define TEGRA234_MAIN_GPIO_PORT_Z  23
+#define TEGRA234_MAIN_GPIO_PORT_AC 24
+#define TEGRA234_MAIN_GPIO_PORT_AD 25
+#define TEGRA234_MAIN_GPIO_PORT_AE 26
+#define TEGRA234_MAIN_GPIO_PORT_AF 27
+#define TEGRA234_MAIN_GPIO_PORT_AG 28
+
+#define TEGRA234_MAIN_GPIO(port, offset) \
+	((TEGRA234_MAIN_GPIO_PORT_##port * 8) + offset)
+
+/* GPIOs implemented by AON GPIO controller */
+#define TEGRA234_AON_GPIO_PORT_AA 0
+#define TEGRA234_AON_GPIO_PORT_BB 1
+#define TEGRA234_AON_GPIO_PORT_CC 2
+#define TEGRA234_AON_GPIO_PORT_DD 3
+#define TEGRA234_AON_GPIO_PORT_EE 4
+#define TEGRA234_AON_GPIO_PORT_GG 5
+
+#define TEGRA234_AON_GPIO(port, offset) \
+	((TEGRA234_AON_GPIO_PORT_##port * 8) + offset)
+
+#endif
diff --git a/dts/include/dt-bindings/gpio/tegra241-gpio.h b/dts/include/dt-bindings/gpio/tegra241-gpio.h
new file mode 100644
index 0000000000..80cee3016b
--- /dev/null
+++ b/dts/include/dt-bindings/gpio/tegra241-gpio.h
@@ -0,0 +1,42 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright (c) 2021, NVIDIA CORPORATION. All rights reserved. */
+
+/*
+ * This header provides constants for the nvidia,tegra241-gpio DT binding.
+ *
+ * The first cell in Tegra's GPIO specifier is the GPIO ID. The macros below
+ * provide names for this.
+ *
+ * The second cell contains standard flag values specified in gpio.h.
+ */
+
+#ifndef _DT_BINDINGS_GPIO_TEGRA241_GPIO_H
+#define _DT_BINDINGS_GPIO_TEGRA241_GPIO_H
+
+#include <dt-bindings/gpio/gpio.h>
+
+/* GPIOs implemented by main GPIO controller */
+#define TEGRA241_MAIN_GPIO_PORT_A 0
+#define TEGRA241_MAIN_GPIO_PORT_B 1
+#define TEGRA241_MAIN_GPIO_PORT_C 2
+#define TEGRA241_MAIN_GPIO_PORT_D 3
+#define TEGRA241_MAIN_GPIO_PORT_E 4
+#define TEGRA241_MAIN_GPIO_PORT_F 5
+#define TEGRA241_MAIN_GPIO_PORT_G 6
+#define TEGRA241_MAIN_GPIO_PORT_H 7
+#define TEGRA241_MAIN_GPIO_PORT_I 8
+#define TEGRA241_MAIN_GPIO_PORT_J 9
+#define TEGRA241_MAIN_GPIO_PORT_K 10
+#define TEGRA241_MAIN_GPIO_PORT_L 11
+
+#define TEGRA241_MAIN_GPIO(port, offset) \
+	((TEGRA241_MAIN_GPIO_PORT_##port * 8) + (offset))
+
+/* GPIOs implemented by AON GPIO controller */
+#define TEGRA241_AON_GPIO_PORT_AA 0
+#define TEGRA241_AON_GPIO_PORT_BB 1
+
+#define TEGRA241_AON_GPIO(port, offset) \
+	((TEGRA241_AON_GPIO_PORT_##port * 8) + (offset))
+
+#endif
diff --git a/dts/include/dt-bindings/iio/addac/adi,ad74413r.h b/dts/include/dt-bindings/iio/addac/adi,ad74413r.h
new file mode 100644
index 0000000000..204f92bbd7
--- /dev/null
+++ b/dts/include/dt-bindings/iio/addac/adi,ad74413r.h
@@ -0,0 +1,21 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef _DT_BINDINGS_ADI_AD74413R_H
+#define _DT_BINDINGS_ADI_AD74413R_H
+
+#define CH_FUNC_HIGH_IMPEDANCE			0x0
+#define CH_FUNC_VOLTAGE_OUTPUT			0x1
+#define CH_FUNC_CURRENT_OUTPUT			0x2
+#define CH_FUNC_VOLTAGE_INPUT			0x3
+#define CH_FUNC_CURRENT_INPUT_EXT_POWER		0x4
+#define CH_FUNC_CURRENT_INPUT_LOOP_POWER	0x5
+#define CH_FUNC_RESISTANCE_INPUT		0x6
+#define CH_FUNC_DIGITAL_INPUT_LOGIC		0x7
+#define CH_FUNC_DIGITAL_INPUT_LOOP_POWER	0x8
+#define CH_FUNC_CURRENT_INPUT_EXT_POWER_HART	0x9
+#define CH_FUNC_CURRENT_INPUT_LOOP_POWER_HART	0xA
+
+#define CH_FUNC_MIN	CH_FUNC_HIGH_IMPEDANCE
+#define CH_FUNC_MAX	CH_FUNC_CURRENT_INPUT_LOOP_POWER_HART
+
+#endif /* _DT_BINDINGS_ADI_AD74413R_H */
diff --git a/dts/include/dt-bindings/interconnect/qcom,msm8996.h b/dts/include/dt-bindings/interconnect/qcom,msm8996.h
new file mode 100644
index 0000000000..a0b7c0ec7b
--- /dev/null
+++ b/dts/include/dt-bindings/interconnect/qcom,msm8996.h
@@ -0,0 +1,163 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause) */
+/*
+ * Qualcomm MSM8996 interconnect IDs
+ *
+ * Copyright (c) 2021 Yassine Oudjana <y.oudjana@protonmail.com>
+ */
+
+#ifndef __DT_BINDINGS_INTERCONNECT_QCOM_MSM8996_H
+#define __DT_BINDINGS_INTERCONNECT_QCOM_MSM8996_H
+
+/* A0NOC */
+#define MASTER_PCIE_0			0
+#define MASTER_PCIE_1			1
+#define MASTER_PCIE_2			2
+
+/* A1NOC */
+#define MASTER_CNOC_A1NOC		0
+#define MASTER_CRYPTO_CORE0		1
+#define MASTER_PNOC_A1NOC		2
+
+/* A2NOC */
+#define MASTER_USB3			0
+#define MASTER_IPA			1
+#define MASTER_UFS			2
+
+/* BIMC */
+#define MASTER_AMPSS_M0			0
+#define MASTER_GRAPHICS_3D		1
+#define MASTER_MNOC_BIMC		2
+#define MASTER_SNOC_BIMC		3
+#define SLAVE_EBI_CH0			4
+#define SLAVE_HMSS_L3			5
+#define SLAVE_BIMC_SNOC_0		6
+#define SLAVE_BIMC_SNOC_1		7
+
+/* CNOC */
+#define MASTER_SNOC_CNOC		0
+#define MASTER_QDSS_DAP			1
+#define SLAVE_CNOC_A1NOC		2
+#define SLAVE_CLK_CTL			3
+#define SLAVE_TCSR			4
+#define SLAVE_TLMM			5
+#define SLAVE_CRYPTO_0_CFG		6
+#define SLAVE_MPM			7
+#define SLAVE_PIMEM_CFG			8
+#define SLAVE_IMEM_CFG			9
+#define SLAVE_MESSAGE_RAM		10
+#define SLAVE_BIMC_CFG			11
+#define SLAVE_PMIC_ARB			12
+#define SLAVE_PRNG			13
+#define SLAVE_DCC_CFG			14
+#define SLAVE_RBCPR_MX			15
+#define SLAVE_QDSS_CFG			16
+#define SLAVE_RBCPR_CX			17
+#define SLAVE_QDSS_RBCPR_APU		18
+#define SLAVE_CNOC_MNOC_CFG		19
+#define SLAVE_SNOC_CFG			20
+#define SLAVE_SNOC_MPU_CFG		21
+#define SLAVE_EBI1_PHY_CFG		22
+#define SLAVE_A0NOC_CFG			23
+#define SLAVE_PCIE_1_CFG		24
+#define SLAVE_PCIE_2_CFG		25
+#define SLAVE_PCIE_0_CFG		26
+#define SLAVE_PCIE20_AHB2PHY		27
+#define SLAVE_A0NOC_MPU_CFG		28
+#define SLAVE_UFS_CFG			29
+#define SLAVE_A1NOC_CFG			30
+#define SLAVE_A1NOC_MPU_CFG		31
+#define SLAVE_A2NOC_CFG			32
+#define SLAVE_A2NOC_MPU_CFG		33
+#define SLAVE_SSC_CFG			34
+#define SLAVE_A0NOC_SMMU_CFG		35
+#define SLAVE_A1NOC_SMMU_CFG		36
+#define SLAVE_A2NOC_SMMU_CFG		37
+#define SLAVE_LPASS_SMMU_CFG		38
+#define SLAVE_CNOC_MNOC_MMSS_CFG	39
+
+/* MNOC */
+#define MASTER_CNOC_MNOC_CFG		0
+#define MASTER_CPP			1
+#define MASTER_JPEG			2
+#define MASTER_MDP_PORT0		3
+#define MASTER_MDP_PORT1		4
+#define MASTER_ROTATOR			5
+#define MASTER_VIDEO_P0			6
+#define MASTER_VFE			7
+#define MASTER_SNOC_VMEM		8
+#define MASTER_VIDEO_P0_OCMEM		9
+#define MASTER_CNOC_MNOC_MMSS_CFG	10
+#define SLAVE_MNOC_BIMC			11
+#define SLAVE_VMEM			12
+#define SLAVE_SERVICE_MNOC		13
+#define SLAVE_MMAGIC_CFG		14
+#define SLAVE_CPR_CFG			15
+#define SLAVE_MISC_CFG			16
+#define SLAVE_VENUS_THROTTLE_CFG	17
+#define SLAVE_VENUS_CFG			18
+#define SLAVE_VMEM_CFG			19
+#define SLAVE_DSA_CFG			20
+#define SLAVE_MMSS_CLK_CFG		21
+#define SLAVE_DSA_MPU_CFG		22
+#define SLAVE_MNOC_MPU_CFG		23
+#define SLAVE_DISPLAY_CFG		24
+#define SLAVE_DISPLAY_THROTTLE_CFG	25
+#define SLAVE_CAMERA_CFG		26
+#define SLAVE_CAMERA_THROTTLE_CFG	27
+#define SLAVE_GRAPHICS_3D_CFG		28
+#define SLAVE_SMMU_MDP_CFG		29
+#define SLAVE_SMMU_ROT_CFG		30
+#define SLAVE_SMMU_VENUS_CFG		31
+#define SLAVE_SMMU_CPP_CFG		32
+#define SLAVE_SMMU_JPEG_CFG		33
+#define SLAVE_SMMU_VFE_CFG		34
+
+/* PNOC */
+#define MASTER_SNOC_PNOC		0
+#define MASTER_SDCC_1			1
+#define MASTER_SDCC_2			2
+#define MASTER_SDCC_4			3
+#define MASTER_USB_HS			4
+#define MASTER_BLSP_1			5
+#define MASTER_BLSP_2			6
+#define MASTER_TSIF			7
+#define SLAVE_PNOC_A1NOC		8
+#define SLAVE_USB_HS			9
+#define SLAVE_SDCC_2			10
+#define SLAVE_SDCC_4			11
+#define SLAVE_TSIF			12
+#define SLAVE_BLSP_2			13
+#define SLAVE_SDCC_1			14
+#define SLAVE_BLSP_1			15
+#define SLAVE_PDM			16
+#define SLAVE_AHB2PHY			17
+
+/* SNOC */
+#define MASTER_HMSS			0
+#define MASTER_QDSS_BAM			1
+#define MASTER_SNOC_CFG			2
+#define MASTER_BIMC_SNOC_0		3
+#define MASTER_BIMC_SNOC_1		4
+#define MASTER_A0NOC_SNOC		5
+#define MASTER_A1NOC_SNOC		6
+#define MASTER_A2NOC_SNOC		7
+#define MASTER_QDSS_ETR			8
+#define SLAVE_A0NOC_SNOC		9
+#define SLAVE_A1NOC_SNOC		10
+#define SLAVE_A2NOC_SNOC		11
+#define SLAVE_HMSS			12
+#define SLAVE_LPASS			13
+#define SLAVE_USB3			14
+#define SLAVE_SNOC_BIMC			15
+#define SLAVE_SNOC_CNOC			16
+#define SLAVE_IMEM			17
+#define SLAVE_PIMEM			18
+#define SLAVE_SNOC_VMEM			19
+#define SLAVE_SNOC_PNOC			20
+#define SLAVE_QDSS_STM			21
+#define SLAVE_PCIE_0			22
+#define SLAVE_PCIE_1			23
+#define SLAVE_PCIE_2			24
+#define SLAVE_SERVICE_SNOC		25
+
+#endif
diff --git a/dts/include/dt-bindings/interconnect/qcom,qcm2290.h b/dts/include/dt-bindings/interconnect/qcom,qcm2290.h
new file mode 100644
index 0000000000..6cbbb7fe0b
--- /dev/null
+++ b/dts/include/dt-bindings/interconnect/qcom,qcm2290.h
@@ -0,0 +1,94 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* QCM2290 interconnect IDs */
+
+#ifndef __DT_BINDINGS_INTERCONNECT_QCOM_QCM2290_H
+#define __DT_BINDINGS_INTERCONNECT_QCOM_QCM2290_H
+
+/* BIMC */
+#define MASTER_APPSS_PROC		0
+#define MASTER_SNOC_BIMC_RT		1
+#define MASTER_SNOC_BIMC_NRT		2
+#define MASTER_SNOC_BIMC		3
+#define MASTER_TCU_0			4
+#define MASTER_GFX3D			5
+#define SLAVE_EBI1			6
+#define SLAVE_BIMC_SNOC			7
+
+/* CNOC */
+#define MASTER_SNOC_CNOC		0
+#define MASTER_QDSS_DAP			1
+#define SLAVE_BIMC_CFG			2
+#define SLAVE_CAMERA_NRT_THROTTLE_CFG	3
+#define SLAVE_CAMERA_RT_THROTTLE_CFG	4
+#define SLAVE_CAMERA_CFG		5
+#define SLAVE_CLK_CTL			6
+#define SLAVE_CRYPTO_0_CFG		7
+#define SLAVE_DISPLAY_CFG		8
+#define SLAVE_DISPLAY_THROTTLE_CFG	9
+#define SLAVE_GPU_CFG			10
+#define SLAVE_HWKM			11
+#define SLAVE_IMEM_CFG			12
+#define SLAVE_IPA_CFG			13
+#define SLAVE_LPASS			14
+#define SLAVE_MESSAGE_RAM		15
+#define SLAVE_PDM			16
+#define SLAVE_PIMEM_CFG			17
+#define SLAVE_PKA_WRAPPER		18
+#define SLAVE_PMIC_ARB			19
+#define SLAVE_PRNG			20
+#define SLAVE_QDSS_CFG			21
+#define SLAVE_QM_CFG			22
+#define SLAVE_QM_MPU_CFG		23
+#define SLAVE_QPIC			24
+#define SLAVE_QUP_0			25
+#define SLAVE_SDCC_1			26
+#define SLAVE_SDCC_2			27
+#define SLAVE_SNOC_CFG			28
+#define SLAVE_TCSR			29
+#define SLAVE_USB3			30
+#define SLAVE_VENUS_CFG			31
+#define SLAVE_VENUS_THROTTLE_CFG	32
+#define SLAVE_VSENSE_CTRL_CFG		33
+#define SLAVE_SERVICE_CNOC		34
+
+/* SNOC */
+#define MASTER_CRYPTO_CORE0		0
+#define MASTER_SNOC_CFG			1
+#define MASTER_TIC			2
+#define MASTER_ANOC_SNOC		3
+#define MASTER_BIMC_SNOC		4
+#define MASTER_PIMEM			5
+#define MASTER_QDSS_BAM			6
+#define MASTER_QUP_0			7
+#define MASTER_IPA			8
+#define MASTER_QDSS_ETR			9
+#define MASTER_SDCC_1			10
+#define MASTER_SDCC_2			11
+#define MASTER_QPIC			12
+#define MASTER_USB3_0			13
+#define SLAVE_APPSS			14
+#define SLAVE_SNOC_CNOC			15
+#define SLAVE_IMEM			16
+#define SLAVE_PIMEM			17
+#define SLAVE_SNOC_BIMC			18
+#define SLAVE_SERVICE_SNOC		19
+#define SLAVE_QDSS_STM			20
+#define SLAVE_TCU			21
+#define SLAVE_ANOC_SNOC			22
+
+/* QUP Virtual */
+#define MASTER_QUP_CORE_0		0
+#define SLAVE_QUP_CORE_0		1
+
+/* MMNRT Virtual */
+#define MASTER_CAMNOC_SF		0
+#define MASTER_VIDEO_P0			1
+#define MASTER_VIDEO_PROC		2
+#define SLAVE_SNOC_BIMC_NRT		3
+
+/* MMRT Virtual */
+#define MASTER_CAMNOC_HF		0
+#define MASTER_MDP0			1
+#define SLAVE_SNOC_BIMC_RT		2
+
+#endif
diff --git a/dts/include/dt-bindings/interconnect/qcom,sm8450.h b/dts/include/dt-bindings/interconnect/qcom,sm8450.h
new file mode 100644
index 0000000000..8f3c5e1fb4
--- /dev/null
+++ b/dts/include/dt-bindings/interconnect/qcom,sm8450.h
@@ -0,0 +1,171 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (c) 2020-2021, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2021, Linaro Limited
+ */
+
+#ifndef __DT_BINDINGS_INTERCONNECT_QCOM_SM8450_H
+#define __DT_BINDINGS_INTERCONNECT_QCOM_SM8450_H
+
+#define MASTER_QSPI_0				0
+#define MASTER_QUP_1				1
+#define MASTER_A1NOC_CFG			2
+#define MASTER_SDCC_4				3
+#define MASTER_UFS_MEM				4
+#define MASTER_USB3_0				5
+#define SLAVE_A1NOC_SNOC			6
+#define SLAVE_SERVICE_A1NOC			7
+
+#define	MASTER_QDSS_BAM				0
+#define	MASTER_QUP_0				1
+#define	MASTER_QUP_2				2
+#define	MASTER_A2NOC_CFG			3
+#define	MASTER_CRYPTO				4
+#define	MASTER_IPA				5
+#define	MASTER_SENSORS_PROC			6
+#define	MASTER_SP				7
+#define	MASTER_QDSS_ETR				8
+#define	MASTER_QDSS_ETR_1			9
+#define	MASTER_SDCC_2				10
+#define	SLAVE_A2NOC_SNOC			11
+#define	SLAVE_SERVICE_A2NOC			12
+
+#define MASTER_QUP_CORE_0			0
+#define MASTER_QUP_CORE_1			1
+#define MASTER_QUP_CORE_2			2
+#define SLAVE_QUP_CORE_0			3
+#define SLAVE_QUP_CORE_1			4
+#define SLAVE_QUP_CORE_2			5
+
+#define	MASTER_GEM_NOC_CNOC			0
+#define	MASTER_GEM_NOC_PCIE_SNOC		1
+#define	SLAVE_AHB2PHY_SOUTH			2
+#define	SLAVE_AHB2PHY_NORTH			3
+#define	SLAVE_AOSS			        4
+#define	SLAVE_CAMERA_CFG			5
+#define	SLAVE_CLK_CTL			        6
+#define	SLAVE_CDSP_CFG			        7
+#define	SLAVE_RBCPR_CX_CFG			8
+#define	SLAVE_RBCPR_MMCX_CFG			9
+#define	SLAVE_RBCPR_MXA_CFG			10
+#define	SLAVE_RBCPR_MXC_CFG			11
+#define	SLAVE_CRYPTO_0_CFG			12
+#define	SLAVE_CX_RDPM				13
+#define	SLAVE_DISPLAY_CFG			14
+#define	SLAVE_GFX3D_CFG			        15
+#define	SLAVE_IMEM_CFG			        16
+#define	SLAVE_IPA_CFG			        17
+#define	SLAVE_IPC_ROUTER_CFG			18
+#define	SLAVE_LPASS			        19
+#define	SLAVE_CNOC_MSS			        20
+#define	SLAVE_MX_RDPM				21
+#define	SLAVE_PCIE_0_CFG			22
+#define	SLAVE_PCIE_1_CFG			23
+#define	SLAVE_PDM				24
+#define	SLAVE_PIMEM_CFG				25
+#define	SLAVE_PRNG				26
+#define	SLAVE_QDSS_CFG				27
+#define	SLAVE_QSPI_0				28
+#define	SLAVE_QUP_0				29
+#define	SLAVE_QUP_1				30
+#define	SLAVE_QUP_2				31
+#define	SLAVE_SDCC_2				32
+#define	SLAVE_SDCC_4				33
+#define	SLAVE_SPSS_CFG				34
+#define	SLAVE_TCSR				35
+#define	SLAVE_TLMM				36
+#define	SLAVE_TME_CFG				37
+#define	SLAVE_UFS_MEM_CFG			38
+#define	SLAVE_USB3_0				39
+#define	SLAVE_VENUS_CFG				40
+#define	SLAVE_VSENSE_CTRL_CFG			41
+#define	SLAVE_A1NOC_CFG				42
+#define	SLAVE_A2NOC_CFG				43
+#define	SLAVE_DDRSS_CFG				44
+#define	SLAVE_CNOC_MNOC_CFG			45
+#define	SLAVE_PCIE_ANOC_CFG			46
+#define	SLAVE_SNOC_CFG				47
+#define	SLAVE_IMEM				48
+#define	SLAVE_PIMEM				49
+#define	SLAVE_SERVICE_CNOC			50
+#define	SLAVE_PCIE_0				51
+#define	SLAVE_PCIE_1				52
+#define	SLAVE_QDSS_STM				53
+#define	SLAVE_TCU				54
+
+#define MASTER_GPU_TCU				0
+#define MASTER_SYS_TCU				1
+#define MASTER_APPSS_PROC			2
+#define MASTER_GFX3D				3
+#define MASTER_MSS_PROC				4
+#define MASTER_MNOC_HF_MEM_NOC			5
+#define MASTER_MNOC_SF_MEM_NOC			6
+#define MASTER_COMPUTE_NOC			7
+#define MASTER_ANOC_PCIE_GEM_NOC		8
+#define MASTER_SNOC_GC_MEM_NOC			9
+#define MASTER_SNOC_SF_MEM_NOC			10
+#define SLAVE_GEM_NOC_CNOC			11
+#define SLAVE_LLCC				12
+#define SLAVE_MEM_NOC_PCIE_SNOC			13
+#define MASTER_MNOC_HF_MEM_NOC_DISP		14
+#define MASTER_MNOC_SF_MEM_NOC_DISP		15
+#define MASTER_ANOC_PCIE_GEM_NOC_DISP		16
+#define SLAVE_LLCC_DISP				17
+
+#define MASTER_CNOC_LPASS_AG_NOC		0
+#define MASTER_LPASS_PROC			1
+#define SLAVE_LPASS_CORE_CFG			2
+#define SLAVE_LPASS_LPI_CFG			3
+#define SLAVE_LPASS_MPU_CFG			4
+#define SLAVE_LPASS_TOP_CFG			5
+#define SLAVE_LPASS_SNOC			6
+#define SLAVE_SERVICES_LPASS_AML_NOC		7
+#define SLAVE_SERVICE_LPASS_AG_NOC		8
+
+#define MASTER_LLCC				0
+#define SLAVE_EBI1				1
+#define MASTER_LLCC_DISP			2
+#define SLAVE_EBI1_DISP				3
+
+#define MASTER_CAMNOC_HF			0
+#define MASTER_CAMNOC_ICP			1
+#define MASTER_CAMNOC_SF			2
+#define MASTER_MDP				3
+#define MASTER_CNOC_MNOC_CFG			4
+#define MASTER_ROTATOR				5
+#define MASTER_CDSP_HCP				6
+#define MASTER_VIDEO				7
+#define MASTER_VIDEO_CV_PROC			8
+#define MASTER_VIDEO_PROC			9
+#define MASTER_VIDEO_V_PROC			10
+#define SLAVE_MNOC_HF_MEM_NOC			11
+#define SLAVE_MNOC_SF_MEM_NOC			12
+#define SLAVE_SERVICE_MNOC			13
+#define MASTER_MDP_DISP				14
+#define MASTER_ROTATOR_DISP			15
+#define SLAVE_MNOC_HF_MEM_NOC_DISP		16
+#define SLAVE_MNOC_SF_MEM_NOC_DISP		17
+
+#define MASTER_CDSP_NOC_CFG			0
+#define MASTER_CDSP_PROC			1
+#define SLAVE_CDSP_MEM_NOC			2
+#define SLAVE_SERVICE_NSP_NOC			3
+
+#define MASTER_PCIE_ANOC_CFG			0
+#define MASTER_PCIE_0				1
+#define MASTER_PCIE_1				2
+#define SLAVE_ANOC_PCIE_GEM_NOC			3
+#define SLAVE_SERVICE_PCIE_ANOC			4
+
+#define MASTER_GIC_AHB				0
+#define MASTER_A1NOC_SNOC			1
+#define MASTER_A2NOC_SNOC			2
+#define MASTER_LPASS_ANOC			3
+#define MASTER_SNOC_CFG				4
+#define MASTER_PIMEM				5
+#define MASTER_GIC				6
+#define SLAVE_SNOC_GEM_NOC_GC			7
+#define SLAVE_SNOC_GEM_NOC_SF			8
+#define SLAVE_SERVICE_SNOC			9
+
+#endif
diff --git a/dts/include/dt-bindings/mailbox/qcom-ipcc.h b/dts/include/dt-bindings/mailbox/qcom-ipcc.h
index eb91a6c05b..9296d0bb5f 100644
--- a/dts/include/dt-bindings/mailbox/qcom-ipcc.h
+++ b/dts/include/dt-bindings/mailbox/qcom-ipcc.h
@@ -8,6 +8,7 @@
 
 /* Signal IDs for MPROC protocol */
 #define IPCC_MPROC_SIGNAL_GLINK_QMP	0
+#define IPCC_MPROC_SIGNAL_TZ		1
 #define IPCC_MPROC_SIGNAL_SMP2P		2
 #define IPCC_MPROC_SIGNAL_PING		3
 
@@ -29,6 +30,7 @@
 #define IPCC_CLIENT_PCIE1		14
 #define IPCC_CLIENT_PCIE2		15
 #define IPCC_CLIENT_SPSS		16
+#define IPCC_CLIENT_TME			23
 #define IPCC_CLIENT_WPSS		24
 
 #endif
diff --git a/dts/include/dt-bindings/memory/tegra234-mc.h b/dts/include/dt-bindings/memory/tegra234-mc.h
new file mode 100644
index 0000000000..2662f70c15
--- /dev/null
+++ b/dts/include/dt-bindings/memory/tegra234-mc.h
@@ -0,0 +1,32 @@
+/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
+
+#ifndef DT_BINDINGS_MEMORY_TEGRA234_MC_H
+#define DT_BINDINGS_MEMORY_TEGRA234_MC_H
+
+/* special clients */
+#define TEGRA234_SID_INVALID		0x00
+#define TEGRA234_SID_PASSTHROUGH	0x7f
+
+
+/* NISO1 stream IDs */
+#define TEGRA234_SID_SDMMC4	0x02
+#define TEGRA234_SID_BPMP	0x10
+
+/*
+ * memory client IDs
+ */
+
+/* sdmmcd memory read client */
+#define TEGRA234_MEMORY_CLIENT_SDMMCRAB 0x63
+/* sdmmcd memory write client */
+#define TEGRA234_MEMORY_CLIENT_SDMMCWAB 0x67
+/* BPMP read client */
+#define TEGRA234_MEMORY_CLIENT_BPMPR 0x93
+/* BPMP write client */
+#define TEGRA234_MEMORY_CLIENT_BPMPW 0x94
+/* BPMPDMA read client */
+#define TEGRA234_MEMORY_CLIENT_BPMPDMAR 0x95
+/* BPMPDMA write client */
+#define TEGRA234_MEMORY_CLIENT_BPMPDMAW 0x96
+
+#endif
diff --git a/dts/include/dt-bindings/mux/ti-serdes.h b/dts/include/dt-bindings/mux/ti-serdes.h
index d417b9268b..d3116c52ab 100644
--- a/dts/include/dt-bindings/mux/ti-serdes.h
+++ b/dts/include/dt-bindings/mux/ti-serdes.h
@@ -95,4 +95,26 @@
 #define AM64_SERDES0_LANE0_PCIE0		0x0
 #define AM64_SERDES0_LANE0_USB			0x1
 
+/* J721S2 */
+
+#define J721S2_SERDES0_LANE0_EDP_LANE0		0x0
+#define J721S2_SERDES0_LANE0_PCIE1_LANE0	0x1
+#define J721S2_SERDES0_LANE0_IP3_UNUSED		0x2
+#define J721S2_SERDES0_LANE0_IP4_UNUSED		0x3
+
+#define J721S2_SERDES0_LANE1_EDP_LANE1		0x0
+#define J721S2_SERDES0_LANE1_PCIE1_LANE1	0x1
+#define J721S2_SERDES0_LANE1_USB		0x2
+#define J721S2_SERDES0_LANE1_IP4_UNUSED		0x3
+
+#define J721S2_SERDES0_LANE2_EDP_LANE2		0x0
+#define J721S2_SERDES0_LANE2_PCIE1_LANE2	0x1
+#define J721S2_SERDES0_LANE2_IP3_UNUSED		0x2
+#define J721S2_SERDES0_LANE2_IP4_UNUSED		0x3
+
+#define J721S2_SERDES0_LANE3_EDP_LANE3		0x0
+#define J721S2_SERDES0_LANE3_PCIE1_LANE3	0x1
+#define J721S2_SERDES0_LANE3_USB		0x2
+#define J721S2_SERDES0_LANE3_IP4_UNUSED		0x3
+
 #endif /* _DT_BINDINGS_MUX_TI_SERDES */
diff --git a/dts/include/dt-bindings/phy/phy-cadence.h b/dts/include/dt-bindings/phy/phy-cadence.h
index 24fdc9e11b..0671991208 100644
--- a/dts/include/dt-bindings/phy/phy-cadence.h
+++ b/dts/include/dt-bindings/phy/phy-cadence.h
@@ -6,11 +6,11 @@
 #ifndef _DT_BINDINGS_CADENCE_SERDES_H
 #define _DT_BINDINGS_CADENCE_SERDES_H
 
-/* Torrent */
-#define TORRENT_SERDES_NO_SSC		0
-#define TORRENT_SERDES_EXTERNAL_SSC	1
-#define TORRENT_SERDES_INTERNAL_SSC	2
+#define CDNS_SERDES_NO_SSC		0
+#define CDNS_SERDES_EXTERNAL_SSC	1
+#define CDNS_SERDES_INTERNAL_SSC	2
 
+/* Torrent */
 #define CDNS_TORRENT_REFCLK_DRIVER      0
 #define CDNS_TORRENT_DERIVED_REFCLK	1
 #define CDNS_TORRENT_RECEIVED_REFCLK	2
@@ -18,5 +18,6 @@
 /* Sierra */
 #define CDNS_SIERRA_PLL_CMNLC		0
 #define CDNS_SIERRA_PLL_CMNLC1		1
+#define CDNS_SIERRA_DERIVED_REFCLK	2
 
 #endif /* _DT_BINDINGS_CADENCE_SERDES_H */
diff --git a/dts/include/dt-bindings/phy/phy-imx8-pcie.h b/dts/include/dt-bindings/phy/phy-imx8-pcie.h
new file mode 100644
index 0000000000..8bbe2d6538
--- /dev/null
+++ b/dts/include/dt-bindings/phy/phy-imx8-pcie.h
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+/*
+ * This header provides constants for i.MX8 PCIe.
+ */
+
+#ifndef _DT_BINDINGS_IMX8_PCIE_H
+#define _DT_BINDINGS_IMX8_PCIE_H
+
+/* Reference clock PAD mode */
+#define IMX8_PCIE_REFCLK_PAD_UNUSED	0
+#define IMX8_PCIE_REFCLK_PAD_INPUT	1
+#define IMX8_PCIE_REFCLK_PAD_OUTPUT	2
+
+#endif /* _DT_BINDINGS_IMX8_PCIE_H */
diff --git a/dts/include/dt-bindings/phy/phy-lan966x-serdes.h b/dts/include/dt-bindings/phy/phy-lan966x-serdes.h
new file mode 100644
index 0000000000..4330269a90
--- /dev/null
+++ b/dts/include/dt-bindings/phy/phy-lan966x-serdes.h
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
+
+#ifndef __PHY_LAN966X_SERDES_H__
+#define __PHY_LAN966X_SERDES_H__
+
+#define CU(x)		(x)
+#define CU_MAX		CU(2)
+#define SERDES6G(x)	(CU_MAX + 1 + (x))
+#define SERDES6G_MAX	SERDES6G(3)
+#define RGMII(x)	(SERDES6G_MAX + 1 + (x))
+#define RGMII_MAX	RGMII(2)
+#define SERDES_MAX	(RGMII_MAX + 1)
+
+#endif
diff --git a/dts/include/dt-bindings/pinctrl/k3.h b/dts/include/dt-bindings/pinctrl/k3.h
index e085f102b2..63e038e36c 100644
--- a/dts/include/dt-bindings/pinctrl/k3.h
+++ b/dts/include/dt-bindings/pinctrl/k3.h
@@ -38,4 +38,7 @@
 #define AM64X_IOPAD(pa, val, muxmode)		(((pa) & 0x1fff)) ((val) | (muxmode))
 #define AM64X_MCU_IOPAD(pa, val, muxmode)	(((pa) & 0x1fff)) ((val) | (muxmode))
 
+#define J721S2_IOPAD(pa, val, muxmode)		(((pa) & 0x1fff)) ((val) | (muxmode))
+#define J721S2_WKUP_IOPAD(pa, val, muxmode)	(((pa) & 0x1fff)) ((val) | (muxmode))
+
 #endif
diff --git a/dts/include/dt-bindings/pinctrl/pinctrl-starfive.h b/dts/include/dt-bindings/pinctrl/pinctrl-starfive.h
new file mode 100644
index 0000000000..de4f75c2c9
--- /dev/null
+++ b/dts/include/dt-bindings/pinctrl/pinctrl-starfive.h
@@ -0,0 +1,275 @@
+/* SPDX-License-Identifier: GPL-2.0 OR MIT */
+/*
+ * Copyright (C) 2021 Emil Renner Berthing <kernel@esmil.dk>
+ */
+
+#ifndef __DT_BINDINGS_PINCTRL_STARFIVE_H__
+#define __DT_BINDINGS_PINCTRL_STARFIVE_H__
+
+#define PAD_GPIO_OFFSET		0
+#define PAD_FUNC_SHARE_OFFSET	64
+#define PAD_GPIO(x)		(PAD_GPIO_OFFSET + (x))
+#define PAD_FUNC_SHARE(x)	(PAD_FUNC_SHARE_OFFSET + (x))
+
+/*
+ * GPIOMUX bits:
+ *  | 31 - 24 | 23 - 16 | 15 - 8 |     7    |     6    |  5 - 0  |
+ *  |  dout   |  doen   |  din   | dout rev | doen rev | gpio nr |
+ *
+ * dout:     output signal
+ * doen:     output enable signal
+ * din:      optional input signal, 0xff = none
+ * dout rev: output signal reverse bit
+ * doen rev: output enable signal reverse bit
+ * gpio nr:  gpio number, 0 - 63
+ */
+#define GPIOMUX(n, dout, doen, din) ( \
+		(((dout) & 0x80000000) >> (31 - 7)) | (((dout) & 0xff) << 24) | \
+		(((doen) & 0x80000000) >> (31 - 6)) | (((doen) & 0xff) << 16) | \
+		(((din) & 0xff) << 8) | \
+		((n) & 0x3f))
+
+#define GPO_REVERSE				0x80000000
+
+#define GPO_LOW					0
+#define GPO_HIGH				1
+#define GPO_ENABLE				0
+#define GPO_DISABLE				1
+#define GPO_CLK_GMAC_PAPHYREF			2
+#define GPO_JTAG_TDO				3
+#define GPO_JTAG_TDO_OEN			4
+#define GPO_DMIC_CLK_OUT			5
+#define GPO_DSP_JTDOEN_PAD			6
+#define GPO_DSP_JTDO_PAD			7
+#define GPO_I2C0_PAD_SCK_OE			8
+#define GPO_I2C0_PAD_SCK_OEN			(GPO_I2C0_PAD_SCK_OE | GPO_REVERSE)
+#define GPO_I2C0_PAD_SDA_OE			9
+#define GPO_I2C0_PAD_SDA_OEN			(GPO_I2C0_PAD_SDA_OE | GPO_REVERSE)
+#define GPO_I2C1_PAD_SCK_OE			10
+#define GPO_I2C1_PAD_SCK_OEN			(GPO_I2C1_PAD_SCK_OE | GPO_REVERSE)
+#define GPO_I2C1_PAD_SDA_OE			11
+#define GPO_I2C1_PAD_SDA_OEN			(GPO_I2C1_PAD_SDA_OE | GPO_REVERSE)
+#define GPO_I2C2_PAD_SCK_OE			12
+#define GPO_I2C2_PAD_SCK_OEN			(GPO_I2C2_PAD_SCK_OE | GPO_REVERSE)
+#define GPO_I2C2_PAD_SDA_OE			13
+#define GPO_I2C2_PAD_SDA_OEN			(GPO_I2C2_PAD_SDA_OE | GPO_REVERSE)
+#define GPO_I2C3_PAD_SCK_OE			14
+#define GPO_I2C3_PAD_SCK_OEN			(GPO_I2C3_PAD_SCK_OE | GPO_REVERSE)
+#define GPO_I2C3_PAD_SDA_OE			15
+#define GPO_I2C3_PAD_SDA_OEN			(GPO_I2C3_PAD_SDA_OE | GPO_REVERSE)
+#define GPO_I2SRX_BCLK_OUT			16
+#define GPO_I2SRX_BCLK_OUT_OEN			17
+#define GPO_I2SRX_LRCK_OUT			18
+#define GPO_I2SRX_LRCK_OUT_OEN			19
+#define GPO_I2SRX_MCLK_OUT			20
+#define GPO_I2STX_BCLK_OUT			21
+#define GPO_I2STX_BCLK_OUT_OEN			22
+#define GPO_I2STX_LRCK_OUT			23
+#define GPO_I2STX_LRCK_OUT_OEN			24
+#define GPO_I2STX_MCLK_OUT			25
+#define GPO_I2STX_SDOUT0			26
+#define GPO_I2STX_SDOUT1			27
+#define GPO_LCD_PAD_CSM_N			28
+#define GPO_PWM_PAD_OE_N_BIT0			29
+#define GPO_PWM_PAD_OE_N_BIT1			30
+#define GPO_PWM_PAD_OE_N_BIT2			31
+#define GPO_PWM_PAD_OE_N_BIT3			32
+#define GPO_PWM_PAD_OE_N_BIT4			33
+#define GPO_PWM_PAD_OE_N_BIT5			34
+#define GPO_PWM_PAD_OE_N_BIT6			35
+#define GPO_PWM_PAD_OE_N_BIT7			36
+#define GPO_PWM_PAD_OUT_BIT0			37
+#define GPO_PWM_PAD_OUT_BIT1			38
+#define GPO_PWM_PAD_OUT_BIT2			39
+#define GPO_PWM_PAD_OUT_BIT3			40
+#define GPO_PWM_PAD_OUT_BIT4			41
+#define GPO_PWM_PAD_OUT_BIT5			42
+#define GPO_PWM_PAD_OUT_BIT6			43
+#define GPO_PWM_PAD_OUT_BIT7			44
+#define GPO_PWMDAC_LEFT_OUT			45
+#define GPO_PWMDAC_RIGHT_OUT			46
+#define GPO_QSPI_CSN1_OUT			47
+#define GPO_QSPI_CSN2_OUT			48
+#define GPO_QSPI_CSN3_OUT			49
+#define GPO_REGISTER23_SCFG_CMSENSOR_RST0	50
+#define GPO_REGISTER23_SCFG_CMSENSOR_RST1	51
+#define GPO_REGISTER32_SCFG_GMAC_PHY_RSTN	52
+#define GPO_SDIO0_PAD_CARD_POWER_EN		53
+#define GPO_SDIO0_PAD_CCLK_OUT			54
+#define GPO_SDIO0_PAD_CCMD_OE			55
+#define GPO_SDIO0_PAD_CCMD_OEN			(GPO_SDIO0_PAD_CCMD_OE | GPO_REVERSE)
+#define GPO_SDIO0_PAD_CCMD_OUT			56
+#define GPO_SDIO0_PAD_CDATA_OE_BIT0		57
+#define GPO_SDIO0_PAD_CDATA_OEN_BIT0		(GPO_SDIO0_PAD_CDATA_OE_BIT0 | GPO_REVERSE)
+#define GPO_SDIO0_PAD_CDATA_OE_BIT1		58
+#define GPO_SDIO0_PAD_CDATA_OEN_BIT1		(GPO_SDIO0_PAD_CDATA_OE_BIT1 | GPO_REVERSE)
+#define GPO_SDIO0_PAD_CDATA_OE_BIT2		59
+#define GPO_SDIO0_PAD_CDATA_OEN_BIT2		(GPO_SDIO0_PAD_CDATA_OE_BIT2 | GPO_REVERSE)
+#define GPO_SDIO0_PAD_CDATA_OE_BIT3		60
+#define GPO_SDIO0_PAD_CDATA_OEN_BIT3		(GPO_SDIO0_PAD_CDATA_OE_BIT3 | GPO_REVERSE)
+#define GPO_SDIO0_PAD_CDATA_OE_BIT4		61
+#define GPO_SDIO0_PAD_CDATA_OEN_BIT4		(GPO_SDIO0_PAD_CDATA_OE_BIT4 | GPO_REVERSE)
+#define GPO_SDIO0_PAD_CDATA_OE_BIT5		62
+#define GPO_SDIO0_PAD_CDATA_OEN_BIT5		(GPO_SDIO0_PAD_CDATA_OE_BIT5 | GPO_REVERSE)
+#define GPO_SDIO0_PAD_CDATA_OE_BIT6		63
+#define GPO_SDIO0_PAD_CDATA_OEN_BIT6		(GPO_SDIO0_PAD_CDATA_OE_BIT6 | GPO_REVERSE)
+#define GPO_SDIO0_PAD_CDATA_OE_BIT7		64
+#define GPO_SDIO0_PAD_CDATA_OEN_BIT7		(GPO_SDIO0_PAD_CDATA_OE_BIT7 | GPO_REVERSE)
+#define GPO_SDIO0_PAD_CDATA_OUT_BIT0		65
+#define GPO_SDIO0_PAD_CDATA_OUT_BIT1		66
+#define GPO_SDIO0_PAD_CDATA_OUT_BIT2		67
+#define GPO_SDIO0_PAD_CDATA_OUT_BIT3		68
+#define GPO_SDIO0_PAD_CDATA_OUT_BIT4		69
+#define GPO_SDIO0_PAD_CDATA_OUT_BIT5		70
+#define GPO_SDIO0_PAD_CDATA_OUT_BIT6		71
+#define GPO_SDIO0_PAD_CDATA_OUT_BIT7		72
+#define GPO_SDIO0_PAD_RST_N			73
+#define GPO_SDIO1_PAD_CARD_POWER_EN		74
+#define GPO_SDIO1_PAD_CCLK_OUT			75
+#define GPO_SDIO1_PAD_CCMD_OE			76
+#define GPO_SDIO1_PAD_CCMD_OEN			(GPO_SDIO1_PAD_CCMD_OE | GPO_REVERSE)
+#define GPO_SDIO1_PAD_CCMD_OUT			77
+#define GPO_SDIO1_PAD_CDATA_OE_BIT0		78
+#define GPO_SDIO1_PAD_CDATA_OEN_BIT0		(GPO_SDIO1_PAD_CDATA_OE_BIT0 | GPO_REVERSE)
+#define GPO_SDIO1_PAD_CDATA_OE_BIT1		79
+#define GPO_SDIO1_PAD_CDATA_OEN_BIT1		(GPO_SDIO1_PAD_CDATA_OE_BIT1 | GPO_REVERSE)
+#define GPO_SDIO1_PAD_CDATA_OE_BIT2		80
+#define GPO_SDIO1_PAD_CDATA_OEN_BIT2		(GPO_SDIO1_PAD_CDATA_OE_BIT2 | GPO_REVERSE)
+#define GPO_SDIO1_PAD_CDATA_OE_BIT3		81
+#define GPO_SDIO1_PAD_CDATA_OEN_BIT3		(GPO_SDIO1_PAD_CDATA_OE_BIT3 | GPO_REVERSE)
+#define GPO_SDIO1_PAD_CDATA_OE_BIT4		82
+#define GPO_SDIO1_PAD_CDATA_OEN_BIT4		(GPO_SDIO1_PAD_CDATA_OE_BIT4 | GPO_REVERSE)
+#define GPO_SDIO1_PAD_CDATA_OE_BIT5		83
+#define GPO_SDIO1_PAD_CDATA_OEN_BIT5		(GPO_SDIO1_PAD_CDATA_OE_BIT5 | GPO_REVERSE)
+#define GPO_SDIO1_PAD_CDATA_OE_BIT6		84
+#define GPO_SDIO1_PAD_CDATA_OEN_BIT6		(GPO_SDIO1_PAD_CDATA_OE_BIT6 | GPO_REVERSE)
+#define GPO_SDIO1_PAD_CDATA_OE_BIT7		85
+#define GPO_SDIO1_PAD_CDATA_OEN_BIT7		(GPO_SDIO1_PAD_CDATA_OE_BIT7 | GPO_REVERSE)
+#define GPO_SDIO1_PAD_CDATA_OUT_BIT0		86
+#define GPO_SDIO1_PAD_CDATA_OUT_BIT1		87
+#define GPO_SDIO1_PAD_CDATA_OUT_BIT2		88
+#define GPO_SDIO1_PAD_CDATA_OUT_BIT3		89
+#define GPO_SDIO1_PAD_CDATA_OUT_BIT4		90
+#define GPO_SDIO1_PAD_CDATA_OUT_BIT5		91
+#define GPO_SDIO1_PAD_CDATA_OUT_BIT6		92
+#define GPO_SDIO1_PAD_CDATA_OUT_BIT7		93
+#define GPO_SDIO1_PAD_RST_N			94
+#define GPO_SPDIF_TX_SDOUT			95
+#define GPO_SPDIF_TX_SDOUT_OEN			96
+#define GPO_SPI0_PAD_OE_N			97
+#define GPO_SPI0_PAD_SCK_OUT			98
+#define GPO_SPI0_PAD_SS_0_N			99
+#define GPO_SPI0_PAD_SS_1_N			100
+#define GPO_SPI0_PAD_TXD			101
+#define GPO_SPI1_PAD_OE_N			102
+#define GPO_SPI1_PAD_SCK_OUT			103
+#define GPO_SPI1_PAD_SS_0_N			104
+#define GPO_SPI1_PAD_SS_1_N			105
+#define GPO_SPI1_PAD_TXD			106
+#define GPO_SPI2_PAD_OE_N			107
+#define GPO_SPI2_PAD_SCK_OUT			108
+#define GPO_SPI2_PAD_SS_0_N			109
+#define GPO_SPI2_PAD_SS_1_N			110
+#define GPO_SPI2_PAD_TXD			111
+#define GPO_SPI2AHB_PAD_OE_N_BIT0		112
+#define GPO_SPI2AHB_PAD_OE_N_BIT1		113
+#define GPO_SPI2AHB_PAD_OE_N_BIT2		114
+#define GPO_SPI2AHB_PAD_OE_N_BIT3		115
+#define GPO_SPI2AHB_PAD_TXD_BIT0		116
+#define GPO_SPI2AHB_PAD_TXD_BIT1		117
+#define GPO_SPI2AHB_PAD_TXD_BIT2		118
+#define GPO_SPI2AHB_PAD_TXD_BIT3		119
+#define GPO_SPI3_PAD_OE_N			120
+#define GPO_SPI3_PAD_SCK_OUT			121
+#define GPO_SPI3_PAD_SS_0_N			122
+#define GPO_SPI3_PAD_SS_1_N			123
+#define GPO_SPI3_PAD_TXD			124
+#define GPO_UART0_PAD_DTRN			125
+#define GPO_UART0_PAD_RTSN			126
+#define GPO_UART0_PAD_SOUT			127
+#define GPO_UART1_PAD_SOUT			128
+#define GPO_UART2_PAD_DTR_N			129
+#define GPO_UART2_PAD_RTS_N			130
+#define GPO_UART2_PAD_SOUT			131
+#define GPO_UART3_PAD_SOUT			132
+#define GPO_USB_DRV_BUS				133
+
+#define GPI_CPU_JTAG_TCK			0
+#define GPI_CPU_JTAG_TDI			1
+#define GPI_CPU_JTAG_TMS			2
+#define GPI_CPU_JTAG_TRST			3
+#define GPI_DMIC_SDIN_BIT0			4
+#define GPI_DMIC_SDIN_BIT1			5
+#define GPI_DSP_JTCK_PAD			6
+#define GPI_DSP_JTDI_PAD			7
+#define GPI_DSP_JTMS_PAD			8
+#define GPI_DSP_TRST_PAD			9
+#define GPI_I2C0_PAD_SCK_IN			10
+#define GPI_I2C0_PAD_SDA_IN			11
+#define GPI_I2C1_PAD_SCK_IN			12
+#define GPI_I2C1_PAD_SDA_IN			13
+#define GPI_I2C2_PAD_SCK_IN			14
+#define GPI_I2C2_PAD_SDA_IN			15
+#define GPI_I2C3_PAD_SCK_IN			16
+#define GPI_I2C3_PAD_SDA_IN			17
+#define GPI_I2SRX_BCLK_IN			18
+#define GPI_I2SRX_LRCK_IN			19
+#define GPI_I2SRX_SDIN_BIT0			20
+#define GPI_I2SRX_SDIN_BIT1			21
+#define GPI_I2SRX_SDIN_BIT2			22
+#define GPI_I2STX_BCLK_IN			23
+#define GPI_I2STX_LRCK_IN			24
+#define GPI_SDIO0_PAD_CARD_DETECT_N		25
+#define GPI_SDIO0_PAD_CARD_WRITE_PRT		26
+#define GPI_SDIO0_PAD_CCMD_IN			27
+#define GPI_SDIO0_PAD_CDATA_IN_BIT0		28
+#define GPI_SDIO0_PAD_CDATA_IN_BIT1		29
+#define GPI_SDIO0_PAD_CDATA_IN_BIT2		30
+#define GPI_SDIO0_PAD_CDATA_IN_BIT3		31
+#define GPI_SDIO0_PAD_CDATA_IN_BIT4		32
+#define GPI_SDIO0_PAD_CDATA_IN_BIT5		33
+#define GPI_SDIO0_PAD_CDATA_IN_BIT6		34
+#define GPI_SDIO0_PAD_CDATA_IN_BIT7		35
+#define GPI_SDIO1_PAD_CARD_DETECT_N		36
+#define GPI_SDIO1_PAD_CARD_WRITE_PRT		37
+#define GPI_SDIO1_PAD_CCMD_IN			38
+#define GPI_SDIO1_PAD_CDATA_IN_BIT0		39
+#define GPI_SDIO1_PAD_CDATA_IN_BIT1		40
+#define GPI_SDIO1_PAD_CDATA_IN_BIT2		41
+#define GPI_SDIO1_PAD_CDATA_IN_BIT3		42
+#define GPI_SDIO1_PAD_CDATA_IN_BIT4		43
+#define GPI_SDIO1_PAD_CDATA_IN_BIT5		44
+#define GPI_SDIO1_PAD_CDATA_IN_BIT6		45
+#define GPI_SDIO1_PAD_CDATA_IN_BIT7		46
+#define GPI_SPDIF_RX_SDIN			47
+#define GPI_SPI0_PAD_RXD			48
+#define GPI_SPI0_PAD_SS_IN_N			49
+#define GPI_SPI1_PAD_RXD			50
+#define GPI_SPI1_PAD_SS_IN_N			51
+#define GPI_SPI2_PAD_RXD			52
+#define GPI_SPI2_PAD_SS_IN_N			53
+#define GPI_SPI2AHB_PAD_RXD_BIT0		54
+#define GPI_SPI2AHB_PAD_RXD_BIT1		55
+#define GPI_SPI2AHB_PAD_RXD_BIT2		56
+#define GPI_SPI2AHB_PAD_RXD_BIT3		57
+#define GPI_SPI2AHB_PAD_SS_N			58
+#define GPI_SPI2AHB_SLV_SCLKIN			59
+#define GPI_SPI3_PAD_RXD			60
+#define GPI_SPI3_PAD_SS_IN_N			61
+#define GPI_UART0_PAD_CTSN			62
+#define GPI_UART0_PAD_DCDN			63
+#define GPI_UART0_PAD_DSRN			64
+#define GPI_UART0_PAD_RIN			65
+#define GPI_UART0_PAD_SIN			66
+#define GPI_UART1_PAD_SIN			67
+#define GPI_UART2_PAD_CTS_N			68
+#define GPI_UART2_PAD_DCD_N			69
+#define GPI_UART2_PAD_DSR_N			70
+#define GPI_UART2_PAD_RI_N			71
+#define GPI_UART2_PAD_SIN			72
+#define GPI_UART3_PAD_SIN			73
+#define GPI_USB_OVER_CURRENT			74
+
+#define GPI_NONE				0xff
+
+#endif /* __DT_BINDINGS_PINCTRL_STARFIVE_H__ */
diff --git a/dts/include/dt-bindings/pinctrl/samsung.h b/dts/include/dt-bindings/pinctrl/samsung.h
index b1832506b9..950970634d 100644
--- a/dts/include/dt-bindings/pinctrl/samsung.h
+++ b/dts/include/dt-bindings/pinctrl/samsung.h
@@ -36,7 +36,10 @@
 #define EXYNOS5260_PIN_DRV_LV4		2
 #define EXYNOS5260_PIN_DRV_LV6		3
 
-/* Drive strengths for Exynos5410, Exynos542x and Exynos5800 */
+/*
+ * Drive strengths for Exynos5410, Exynos542x, Exynos5800 and Exynos850 (except
+ * GPIO_HSI block)
+ */
 #define EXYNOS5420_PIN_DRV_LV1		0
 #define EXYNOS5420_PIN_DRV_LV2		1
 #define EXYNOS5420_PIN_DRV_LV3		2
@@ -56,6 +59,14 @@
 #define EXYNOS5433_PIN_DRV_SLOW_SR5	0xc
 #define EXYNOS5433_PIN_DRV_SLOW_SR6	0xf
 
+/* Drive strengths for Exynos850 GPIO_HSI block */
+#define EXYNOS850_HSI_PIN_DRV_LV1	0	/* 1x   */
+#define EXYNOS850_HSI_PIN_DRV_LV1_5	1	/* 1.5x */
+#define EXYNOS850_HSI_PIN_DRV_LV2	2	/* 2x   */
+#define EXYNOS850_HSI_PIN_DRV_LV2_5	3	/* 2.5x */
+#define EXYNOS850_HSI_PIN_DRV_LV3	4	/* 3x   */
+#define EXYNOS850_HSI_PIN_DRV_LV4	5	/* 4x   */
+
 #define EXYNOS_PIN_FUNC_INPUT		0
 #define EXYNOS_PIN_FUNC_OUTPUT		1
 #define EXYNOS_PIN_FUNC_2		2
diff --git a/dts/include/dt-bindings/power/imx8mn-power.h b/dts/include/dt-bindings/power/imx8mn-power.h
index 102ee85a9b..eedd0e5819 100644
--- a/dts/include/dt-bindings/power/imx8mn-power.h
+++ b/dts/include/dt-bindings/power/imx8mn-power.h
@@ -12,4 +12,9 @@
 #define IMX8MN_POWER_DOMAIN_DISPMIX	3
 #define IMX8MN_POWER_DOMAIN_MIPI	4
 
+#define IMX8MN_DISPBLK_PD_MIPI_DSI	0
+#define IMX8MN_DISPBLK_PD_MIPI_CSI	1
+#define IMX8MN_DISPBLK_PD_LCDIF	2
+#define IMX8MN_DISPBLK_PD_ISI	3
+
 #endif
diff --git a/dts/include/dt-bindings/power/imx8ulp-power.h b/dts/include/dt-bindings/power/imx8ulp-power.h
new file mode 100644
index 0000000000..a556b2e96d
--- /dev/null
+++ b/dts/include/dt-bindings/power/imx8ulp-power.h
@@ -0,0 +1,26 @@
+/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
+/*
+ *  Copyright 2021 NXP
+ */
+
+#ifndef __DT_BINDINGS_IMX8ULP_POWER_H__
+#define __DT_BINDINGS_IMX8ULP_POWER_H__
+
+#define IMX8ULP_PD_DMA1		0
+#define IMX8ULP_PD_FLEXSPI2	1
+#define IMX8ULP_PD_USB0		2
+#define IMX8ULP_PD_USDHC0	3
+#define IMX8ULP_PD_USDHC1	4
+#define IMX8ULP_PD_USDHC2_USB1	5
+#define IMX8ULP_PD_DCNANO	6
+#define IMX8ULP_PD_EPDC		7
+#define IMX8ULP_PD_DMA2		8
+#define IMX8ULP_PD_GPU2D	9
+#define IMX8ULP_PD_GPU3D	10
+#define IMX8ULP_PD_HIFI4	11
+#define IMX8ULP_PD_ISI		12
+#define IMX8ULP_PD_MIPI_CSI	13
+#define IMX8ULP_PD_MIPI_DSI	14
+#define IMX8ULP_PD_PXP		15
+
+#endif
diff --git a/dts/include/dt-bindings/power/qcom-rpmpd.h b/dts/include/dt-bindings/power/qcom-rpmpd.h
index 960f7976a8..edfc1ff2ac 100644
--- a/dts/include/dt-bindings/power/qcom-rpmpd.h
+++ b/dts/include/dt-bindings/power/qcom-rpmpd.h
@@ -68,6 +68,21 @@
 #define SM8350_MXC_AO	11
 #define SM8350_MSS	12
 
+/* SM8450 Power Domain Indexes */
+#define SM8450_CX	0
+#define SM8450_CX_AO	1
+#define SM8450_EBI	2
+#define SM8450_GFX	3
+#define SM8450_LCX	4
+#define SM8450_LMX	5
+#define SM8450_MMCX	6
+#define SM8450_MMCX_AO	7
+#define SM8450_MX	8
+#define SM8450_MX_AO	9
+#define SM8450_MXC	10
+#define SM8450_MXC_AO	11
+#define SM8450_MSS	12
+
 /* SC7180 Power Domain Indexes */
 #define SC7180_CX	0
 #define SC7180_CX_AO	1
@@ -219,6 +234,24 @@
 #define SM6115_VDD_LPI_CX	6
 #define SM6115_VDD_LPI_MX	7
 
+/* SM6125 Power Domains */
+#define SM6125_VDDCX		0
+#define SM6125_VDDCX_AO		1
+#define SM6125_VDDCX_VFL	2
+#define SM6125_VDDMX		3
+#define SM6125_VDDMX_AO		4
+#define SM6125_VDDMX_VFL	5
+
+/* QCM2290 Power Domains */
+#define QCM2290_VDDCX		0
+#define QCM2290_VDDCX_AO	1
+#define QCM2290_VDDCX_VFL	2
+#define QCM2290_VDDMX		3
+#define QCM2290_VDDMX_AO	4
+#define QCM2290_VDDMX_VFL	5
+#define QCM2290_VDD_LPI_CX	6
+#define QCM2290_VDD_LPI_MX	7
+
 /* RPM SMD Power Domain performance levels */
 #define RPM_SMD_LEVEL_RETENTION       16
 #define RPM_SMD_LEVEL_RETENTION_PLUS  32
diff --git a/dts/include/dt-bindings/power/r8a779f0-sysc.h b/dts/include/dt-bindings/power/r8a779f0-sysc.h
new file mode 100644
index 0000000000..0ec8ad727e
--- /dev/null
+++ b/dts/include/dt-bindings/power/r8a779f0-sysc.h
@@ -0,0 +1,30 @@
+/* SPDX-License-Identifier: (GPL-2.0 or MIT) */
+/*
+ * Copyright (C) 2021 Renesas Electronics Corp.
+ */
+#ifndef __DT_BINDINGS_POWER_R8A779F0_SYSC_H__
+#define __DT_BINDINGS_POWER_R8A779F0_SYSC_H__
+
+/*
+ * These power domain indices match the Power Domain Register Numbers (PDR)
+ */
+
+#define R8A779F0_PD_A1E0D0C0		0
+#define R8A779F0_PD_A1E0D0C1		1
+#define R8A779F0_PD_A1E0D1C0		2
+#define R8A779F0_PD_A1E0D1C1		3
+#define R8A779F0_PD_A1E1D0C0		4
+#define R8A779F0_PD_A1E1D0C1		5
+#define R8A779F0_PD_A1E1D1C0		6
+#define R8A779F0_PD_A1E1D1C1		7
+#define R8A779F0_PD_A2E0D0		16
+#define R8A779F0_PD_A2E0D1		17
+#define R8A779F0_PD_A2E1D0		18
+#define R8A779F0_PD_A2E1D1		19
+#define R8A779F0_PD_A3E0		20
+#define R8A779F0_PD_A3E1		21
+
+/* Always-on power area */
+#define R8A779F0_PD_ALWAYS_ON		64
+
+#endif /* __DT_BINDINGS_POWER_R8A779A0_SYSC_H__*/
diff --git a/dts/include/dt-bindings/reset/starfive-jh7100.h b/dts/include/dt-bindings/reset/starfive-jh7100.h
new file mode 100644
index 0000000000..540e19254f
--- /dev/null
+++ b/dts/include/dt-bindings/reset/starfive-jh7100.h
@@ -0,0 +1,126 @@
+/* SPDX-License-Identifier: GPL-2.0 OR MIT */
+/*
+ * Copyright (C) 2021 Ahmad Fatoum, Pengutronix
+ */
+
+#ifndef __DT_BINDINGS_RESET_STARFIVE_JH7100_H__
+#define __DT_BINDINGS_RESET_STARFIVE_JH7100_H__
+
+#define JH7100_RSTN_DOM3AHB_BUS		0
+#define JH7100_RSTN_DOM7AHB_BUS		1
+#define JH7100_RST_U74			2
+#define JH7100_RSTN_U74_AXI		3
+#define JH7100_RSTN_SGDMA2P_AHB		4
+#define JH7100_RSTN_SGDMA2P_AXI		5
+#define JH7100_RSTN_DMA2PNOC_AXI	6
+#define JH7100_RSTN_DLA_AXI		7
+#define JH7100_RSTN_DLANOC_AXI		8
+#define JH7100_RSTN_DLA_APB		9
+#define JH7100_RST_VP6_DRESET		10
+#define JH7100_RST_VP6_BRESET		11
+#define JH7100_RSTN_VP6_AXI		12
+#define JH7100_RSTN_VDECBRG_MAIN	13
+#define JH7100_RSTN_VDEC_AXI		14
+#define JH7100_RSTN_VDEC_BCLK		15
+#define JH7100_RSTN_VDEC_CCLK		16
+#define JH7100_RSTN_VDEC_APB		17
+#define JH7100_RSTN_JPEG_AXI		18
+#define JH7100_RSTN_JPEG_CCLK		19
+#define JH7100_RSTN_JPEG_APB		20
+#define JH7100_RSTN_JPCGC300_MAIN	21
+#define JH7100_RSTN_GC300_2X		22
+#define JH7100_RSTN_GC300_AXI		23
+#define JH7100_RSTN_GC300_AHB		24
+#define JH7100_RSTN_VENC_AXI		25
+#define JH7100_RSTN_VENCBRG_MAIN	26
+#define JH7100_RSTN_VENC_BCLK		27
+#define JH7100_RSTN_VENC_CCLK		28
+#define JH7100_RSTN_VENC_APB		29
+#define JH7100_RSTN_DDRPHY_APB		30
+#define JH7100_RSTN_NOC_ROB		31
+#define JH7100_RSTN_NOC_COG		32
+#define JH7100_RSTN_HIFI4_AXI		33
+#define JH7100_RSTN_HIFI4NOC_AXI	34
+#define JH7100_RST_HIFI4_DRESET		35
+#define JH7100_RST_HIFI4_BRESET		36
+#define JH7100_RSTN_USB_AXI		37
+#define JH7100_RSTN_USBNOC_AXI		38
+#define JH7100_RSTN_SGDMA1P_AXI		39
+#define JH7100_RSTN_DMA1P_AXI		40
+#define JH7100_RSTN_X2C_AXI		41
+#define JH7100_RSTN_NNE_AHB		42
+#define JH7100_RSTN_NNE_AXI		43
+#define JH7100_RSTN_NNENOC_AXI		44
+#define JH7100_RSTN_DLASLV_AXI		45
+#define JH7100_RSTN_DSPX2C_AXI		46
+#define JH7100_RSTN_VIN_SRC		47
+#define JH7100_RSTN_ISPSLV_AXI		48
+#define JH7100_RSTN_VIN_AXI		49
+#define JH7100_RSTN_VINNOC_AXI		50
+#define JH7100_RSTN_ISP0_AXI		51
+#define JH7100_RSTN_ISP0NOC_AXI		52
+#define JH7100_RSTN_ISP1_AXI		53
+#define JH7100_RSTN_ISP1NOC_AXI		54
+#define JH7100_RSTN_VOUT_SRC		55
+#define JH7100_RSTN_DISP_AXI		56
+#define JH7100_RSTN_DISPNOC_AXI		57
+#define JH7100_RSTN_SDIO0_AHB		58
+#define JH7100_RSTN_SDIO1_AHB		59
+#define JH7100_RSTN_GMAC_AHB		60
+#define JH7100_RSTN_SPI2AHB_AHB		61
+#define JH7100_RSTN_SPI2AHB_CORE	62
+#define JH7100_RSTN_EZMASTER_AHB	63
+#define JH7100_RST_E24			64
+#define JH7100_RSTN_QSPI_AHB		65
+#define JH7100_RSTN_QSPI_CORE		66
+#define JH7100_RSTN_QSPI_APB		67
+#define JH7100_RSTN_SEC_AHB		68
+#define JH7100_RSTN_AES			69
+#define JH7100_RSTN_PKA			70
+#define JH7100_RSTN_SHA			71
+#define JH7100_RSTN_TRNG_APB		72
+#define JH7100_RSTN_OTP_APB		73
+#define JH7100_RSTN_UART0_APB		74
+#define JH7100_RSTN_UART0_CORE		75
+#define JH7100_RSTN_UART1_APB		76
+#define JH7100_RSTN_UART1_CORE		77
+#define JH7100_RSTN_SPI0_APB		78
+#define JH7100_RSTN_SPI0_CORE		79
+#define JH7100_RSTN_SPI1_APB		80
+#define JH7100_RSTN_SPI1_CORE		81
+#define JH7100_RSTN_I2C0_APB		82
+#define JH7100_RSTN_I2C0_CORE		83
+#define JH7100_RSTN_I2C1_APB		84
+#define JH7100_RSTN_I2C1_CORE		85
+#define JH7100_RSTN_GPIO_APB		86
+#define JH7100_RSTN_UART2_APB		87
+#define JH7100_RSTN_UART2_CORE		88
+#define JH7100_RSTN_UART3_APB		89
+#define JH7100_RSTN_UART3_CORE		90
+#define JH7100_RSTN_SPI2_APB		91
+#define JH7100_RSTN_SPI2_CORE		92
+#define JH7100_RSTN_SPI3_APB		93
+#define JH7100_RSTN_SPI3_CORE		94
+#define JH7100_RSTN_I2C2_APB		95
+#define JH7100_RSTN_I2C2_CORE		96
+#define JH7100_RSTN_I2C3_APB		97
+#define JH7100_RSTN_I2C3_CORE		98
+#define JH7100_RSTN_WDTIMER_APB		99
+#define JH7100_RSTN_WDT			100
+#define JH7100_RSTN_TIMER0		101
+#define JH7100_RSTN_TIMER1		102
+#define JH7100_RSTN_TIMER2		103
+#define JH7100_RSTN_TIMER3		104
+#define JH7100_RSTN_TIMER4		105
+#define JH7100_RSTN_TIMER5		106
+#define JH7100_RSTN_TIMER6		107
+#define JH7100_RSTN_VP6INTC_APB		108
+#define JH7100_RSTN_PWM_APB		109
+#define JH7100_RSTN_MSI_APB		110
+#define JH7100_RSTN_TEMP_APB		111
+#define JH7100_RSTN_TEMP_SENSE		112
+#define JH7100_RSTN_SYSERR_APB		113
+
+#define JH7100_RSTN_END			114
+
+#endif /* __DT_BINDINGS_RESET_STARFIVE_JH7100_H__ */
diff --git a/dts/include/dt-bindings/reset/sun20i-d1-ccu.h b/dts/include/dt-bindings/reset/sun20i-d1-ccu.h
new file mode 100644
index 0000000000..de9ff52032
--- /dev/null
+++ b/dts/include/dt-bindings/reset/sun20i-d1-ccu.h
@@ -0,0 +1,77 @@
+/* SPDX-License-Identifier: (GPL-2.0+ or MIT) */
+/*
+ * Copyright (c) 2020 huangzhenwei@allwinnertech.com
+ * Copyright (C) 2021 Samuel Holland <samuel@sholland.org>
+ */
+
+#ifndef _DT_BINDINGS_RST_SUN20I_D1_CCU_H_
+#define _DT_BINDINGS_RST_SUN20I_D1_CCU_H_
+
+#define RST_MBUS		0
+#define RST_BUS_DE		1
+#define RST_BUS_DI		2
+#define RST_BUS_G2D		3
+#define RST_BUS_CE		4
+#define RST_BUS_VE		5
+#define RST_BUS_DMA		6
+#define RST_BUS_MSGBOX0		7
+#define RST_BUS_MSGBOX1		8
+#define RST_BUS_MSGBOX2		9
+#define RST_BUS_SPINLOCK	10
+#define RST_BUS_HSTIMER		11
+#define RST_BUS_DBG		12
+#define RST_BUS_PWM		13
+#define RST_BUS_DRAM		14
+#define RST_BUS_MMC0		15
+#define RST_BUS_MMC1		16
+#define RST_BUS_MMC2		17
+#define RST_BUS_UART0		18
+#define RST_BUS_UART1		19
+#define RST_BUS_UART2		20
+#define RST_BUS_UART3		21
+#define RST_BUS_UART4		22
+#define RST_BUS_UART5		23
+#define RST_BUS_I2C0		24
+#define RST_BUS_I2C1		25
+#define RST_BUS_I2C2		26
+#define RST_BUS_I2C3		27
+#define RST_BUS_SPI0		28
+#define RST_BUS_SPI1		29
+#define RST_BUS_EMAC		30
+#define RST_BUS_IR_TX		31
+#define RST_BUS_GPADC		32
+#define RST_BUS_THS		33
+#define RST_BUS_I2S0		34
+#define RST_BUS_I2S1		35
+#define RST_BUS_I2S2		36
+#define RST_BUS_SPDIF		37
+#define RST_BUS_DMIC		38
+#define RST_BUS_AUDIO		39
+#define RST_USB_PHY0		40
+#define RST_USB_PHY1		41
+#define RST_BUS_OHCI0		42
+#define RST_BUS_OHCI1		43
+#define RST_BUS_EHCI0		44
+#define RST_BUS_EHCI1		45
+#define RST_BUS_OTG		46
+#define RST_BUS_LRADC		47
+#define RST_BUS_DPSS_TOP	48
+#define RST_BUS_HDMI_SUB	49
+#define RST_BUS_HDMI_MAIN	50
+#define RST_BUS_MIPI_DSI	51
+#define RST_BUS_TCON_LCD0	52
+#define RST_BUS_TCON_TV		53
+#define RST_BUS_LVDS0		54
+#define RST_BUS_TVE		55
+#define RST_BUS_TVE_TOP		56
+#define RST_BUS_TVD		57
+#define RST_BUS_TVD_TOP		58
+#define RST_BUS_LEDC		59
+#define RST_BUS_CSI		60
+#define RST_BUS_TPADC		61
+#define RST_DSP			62
+#define RST_BUS_DSP_CFG		63
+#define RST_BUS_DSP_DBG		64
+#define RST_BUS_RISCV_CFG	65
+
+#endif /* _DT_BINDINGS_RST_SUN20I_D1_CCU_H_ */
diff --git a/dts/include/dt-bindings/reset/sun20i-d1-r-ccu.h b/dts/include/dt-bindings/reset/sun20i-d1-r-ccu.h
new file mode 100644
index 0000000000..d93d6423d2
--- /dev/null
+++ b/dts/include/dt-bindings/reset/sun20i-d1-r-ccu.h
@@ -0,0 +1,16 @@
+/* SPDX-License-Identifier: (GPL-2.0+ or MIT) */
+/*
+ * Copyright (C) 2021 Samuel Holland <samuel@sholland.org>
+ */
+
+#ifndef _DT_BINDINGS_RST_SUN20I_D1_R_CCU_H_
+#define _DT_BINDINGS_RST_SUN20I_D1_R_CCU_H_
+
+#define RST_BUS_R_TIMER		0
+#define RST_BUS_R_TWD		1
+#define RST_BUS_R_PPU		2
+#define RST_BUS_R_IR_RX		3
+#define RST_BUS_R_RTC		4
+#define RST_BUS_R_CPUCFG	5
+
+#endif /* _DT_BINDINGS_RST_SUN20I_D1_R_CCU_H_ */
diff --git a/dts/include/dt-bindings/reset/tegra234-reset.h b/dts/include/dt-bindings/reset/tegra234-reset.h
index b3c63be06d..50e13bced6 100644
--- a/dts/include/dt-bindings/reset/tegra234-reset.h
+++ b/dts/include/dt-bindings/reset/tegra234-reset.h
@@ -4,7 +4,15 @@
 #ifndef DT_BINDINGS_RESET_TEGRA234_RESET_H
 #define DT_BINDINGS_RESET_TEGRA234_RESET_H
 
-#define TEGRA234_RESET_SDMMC4			85
-#define TEGRA234_RESET_UARTA			100
+/**
+ * @file
+ * @defgroup bpmp_reset_ids Reset ID's
+ * @brief Identifiers for Resets controllable by firmware
+ * @{
+ */
+#define TEGRA234_RESET_SDMMC4			85U
+#define TEGRA234_RESET_UARTA			100U
+
+/** @} */
 
 #endif
diff --git a/dts/include/dt-bindings/reset/toshiba,tmpv770x.h b/dts/include/dt-bindings/reset/toshiba,tmpv770x.h
new file mode 100644
index 0000000000..c1007acb19
--- /dev/null
+++ b/dts/include/dt-bindings/reset/toshiba,tmpv770x.h
@@ -0,0 +1,41 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+
+#ifndef _DT_BINDINGS_RESET_TOSHIBA_TMPV770X_H_
+#define _DT_BINDINGS_RESET_TOSHIBA_TMPV770X_H_
+
+/* Reset */
+#define TMPV770X_RESET_PIETHER_2P5M	0
+#define TMPV770X_RESET_PIETHER_25M	1
+#define TMPV770X_RESET_PIETHER_50M	2
+#define TMPV770X_RESET_PIETHER_125M	3
+#define TMPV770X_RESET_HOX		4
+#define TMPV770X_RESET_PCIE_MSTR	5
+#define TMPV770X_RESET_PCIE_AUX		6
+#define TMPV770X_RESET_PIINTC		7
+#define TMPV770X_RESET_PIETHER_BUS	8
+#define TMPV770X_RESET_PISPI0		9
+#define TMPV770X_RESET_PISPI1		10
+#define TMPV770X_RESET_PISPI2		11
+#define TMPV770X_RESET_PISPI3		12
+#define TMPV770X_RESET_PISPI4		13
+#define TMPV770X_RESET_PISPI5		14
+#define TMPV770X_RESET_PISPI6		15
+#define TMPV770X_RESET_PIUART0		16
+#define TMPV770X_RESET_PIUART1		17
+#define TMPV770X_RESET_PIUART2		18
+#define TMPV770X_RESET_PIUART3		19
+#define TMPV770X_RESET_PII2C0		20
+#define TMPV770X_RESET_PII2C1		21
+#define TMPV770X_RESET_PII2C2		22
+#define TMPV770X_RESET_PII2C3		23
+#define TMPV770X_RESET_PII2C4		24
+#define TMPV770X_RESET_PII2C5		25
+#define TMPV770X_RESET_PII2C6		26
+#define TMPV770X_RESET_PII2C7		27
+#define TMPV770X_RESET_PII2C8		28
+#define TMPV770X_RESET_PIPCMIF		29
+#define TMPV770X_RESET_PICKMON		30
+#define TMPV770X_RESET_SBUSCLK		31
+#define TMPV770X_NR_RESET		32
+
+#endif /*_DT_BINDINGS_RESET_TOSHIBA_TMPV770X_H_ */
diff --git a/dts/include/dt-bindings/soc/samsung,exynos-usi.h b/dts/include/dt-bindings/soc/samsung,exynos-usi.h
new file mode 100644
index 0000000000..a01af169d2
--- /dev/null
+++ b/dts/include/dt-bindings/soc/samsung,exynos-usi.h
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (c) 2021 Linaro Ltd.
+ * Author: Sam Protsenko <semen.protsenko@linaro.org>
+ *
+ * Device Tree bindings for Samsung Exynos USI (Universal Serial Interface).
+ */
+
+#ifndef __DT_BINDINGS_SAMSUNG_EXYNOS_USI_H
+#define __DT_BINDINGS_SAMSUNG_EXYNOS_USI_H
+
+#define USI_V2_NONE		0
+#define USI_V2_UART		1
+#define USI_V2_SPI		2
+#define USI_V2_I2C		3
+
+#endif /* __DT_BINDINGS_SAMSUNG_EXYNOS_USI_H */
diff --git a/dts/include/dt-bindings/sound/rt5640.h b/dts/include/dt-bindings/sound/rt5640.h
index 154c9b4414..655f694638 100644
--- a/dts/include/dt-bindings/sound/rt5640.h
+++ b/dts/include/dt-bindings/sound/rt5640.h
@@ -16,6 +16,7 @@
 #define RT5640_JD_SRC_GPIO2		4
 #define RT5640_JD_SRC_GPIO3		5
 #define RT5640_JD_SRC_GPIO4		6
+#define RT5640_JD_SRC_HDA_HEADER	7
 
 #define RT5640_OVCD_SF_0P5		0
 #define RT5640_OVCD_SF_0P75		1
diff --git a/dts/include/dt-bindings/sound/tlv320adc3xxx.h b/dts/include/dt-bindings/sound/tlv320adc3xxx.h
new file mode 100644
index 0000000000..ec988439da
--- /dev/null
+++ b/dts/include/dt-bindings/sound/tlv320adc3xxx.h
@@ -0,0 +1,28 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Devicetree bindings definitions for tlv320adc3xxx driver.
+ *
+ * Copyright (C) 2021 Axis Communications AB
+ */
+#ifndef __DT_TLV320ADC3XXX_H
+#define __DT_TLV320ADC3XXX_H
+
+#define ADC3XXX_GPIO_DISABLED		0 /* I/O buffers powered down */
+#define ADC3XXX_GPIO_INPUT		1 /* Various non-GPIO inputs */
+#define ADC3XXX_GPIO_GPI		2 /* General purpose input */
+#define ADC3XXX_GPIO_GPO		3 /* General purpose output */
+#define ADC3XXX_GPIO_CLKOUT		4 /* Source set in reg. CLKOUT_MUX */
+#define ADC3XXX_GPIO_INT1		5 /* INT1 output */
+#define ADC3XXX_GPIO_INT2		6 /* INT2 output */
+/* value 7 is reserved */
+#define ADC3XXX_GPIO_SECONDARY_BCLK	8 /* Codec interface secondary BCLK */
+#define ADC3XXX_GPIO_SECONDARY_WCLK	9 /* Codec interface secondary WCLK */
+#define ADC3XXX_GPIO_ADC_MOD_CLK	10 /* Clock output for digital mics */
+/* values 11-15 reserved */
+
+#define ADC3XXX_MICBIAS_OFF		0 /* Micbias pin powered off */
+#define ADC3XXX_MICBIAS_2_0V		1 /* Micbias pin set to 2.0V */
+#define ADC3XXX_MICBIAS_2_5V		2 /* Micbias pin set to 2.5V */
+#define ADC3XXX_MICBIAS_AVDD		3 /* Use AVDD voltage for micbias pin */
+
+#endif /* __DT_TLV320ADC3XXX_H */
diff --git a/dts/src/arm/am335x-bone-common.dtsi b/dts/src/arm/am335x-bone-common.dtsi
index 0ccdc7cd46..56ae5095a5 100644
--- a/dts/src/arm/am335x-bone-common.dtsi
+++ b/dts/src/arm/am335x-bone-common.dtsi
@@ -399,6 +399,7 @@
 &rtc {
 	clocks = <&clk_32768_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
 	clock-names = "ext-clk", "int-clk";
+	system-power-controller;
 };
 
 &pruss_tm {
diff --git a/dts/src/arm/am335x-boneblack-common.dtsi b/dts/src/arm/am335x-boneblack-common.dtsi
index 10494c4431..a7a8c61ef9 100644
--- a/dts/src/arm/am335x-boneblack-common.dtsi
+++ b/dts/src/arm/am335x-boneblack-common.dtsi
@@ -22,10 +22,6 @@
 	non-removable;
 };
 
-&rtc {
-	system-power-controller;
-};
-
 / {
 	memory@80000000 {
 		device_type = "memory";
diff --git a/dts/src/arm/am335x-boneblue.dts b/dts/src/arm/am335x-boneblue.dts
index c6bb325ead..147c00de37 100644
--- a/dts/src/arm/am335x-boneblue.dts
+++ b/dts/src/arm/am335x-boneblue.dts
@@ -341,7 +341,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ax8975@c {
-				compatible = "ak,ak8975";
+				compatible = "asahi-kasei,ak8975";
 				reg = <0x0c>;
 			};
 		};
diff --git a/dts/src/arm/am335x-icev2.dts b/dts/src/arm/am335x-icev2.dts
index e5ce89c8f5..5835c0cdda 100644
--- a/dts/src/arm/am335x-icev2.dts
+++ b/dts/src/arm/am335x-icev2.dts
@@ -512,3 +512,7 @@
 &pruss_tm {
 	status = "okay";
 };
+
+&rtc {
+	system-power-controller;
+};
diff --git a/dts/src/arm/am335x-osd3358-sm-red.dts b/dts/src/arm/am335x-osd3358-sm-red.dts
index 605b2a436e..b2846cd220 100644
--- a/dts/src/arm/am335x-osd3358-sm-red.dts
+++ b/dts/src/arm/am335x-osd3358-sm-red.dts
@@ -84,7 +84,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ax8975@c {
-				compatible = "ak,ak8975";
+				compatible = "asahi-kasei,ak8975";
 				reg = <0x0c>;
 			};
 		};
diff --git a/dts/src/arm/am437x-cm-t43.dts b/dts/src/arm/am437x-cm-t43.dts
index 5ce8e684e7..3e3354780d 100644
--- a/dts/src/arm/am437x-cm-t43.dts
+++ b/dts/src/arm/am437x-cm-t43.dts
@@ -399,7 +399,7 @@
 	tsc {
 		ti,wires = <4>;
 		ti,x-plate-resistance = <200>;
-		ti,coordiante-readouts = <5>;
+		ti,coordinate-readouts = <5>;
 		ti,wire-config = <0x00 0x11 0x22 0x33>;
 	};
 
diff --git a/dts/src/arm/am437x-gp-evm.dts b/dts/src/arm/am437x-gp-evm.dts
index c2e4896076..4416ddb559 100644
--- a/dts/src/arm/am437x-gp-evm.dts
+++ b/dts/src/arm/am437x-gp-evm.dts
@@ -775,6 +775,14 @@
 	};
 };
 
+&magadc {
+	status = "okay";
+
+	adc {
+		ti,adc-channels = <0 1 2 3 4 5 6 7>;
+	};
+};
+
 &ecap0 {
 	status = "okay";
 	pinctrl-names = "default";
diff --git a/dts/src/arm/am437x-l4.dtsi b/dts/src/arm/am437x-l4.dtsi
index ba58e6b0da..8f2268c027 100644
--- a/dts/src/arm/am437x-l4.dtsi
+++ b/dts/src/arm/am437x-l4.dtsi
@@ -2378,11 +2378,38 @@
 		};
 
 		target-module@4c000 {			/* 0x4834c000, ap 114 72.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x4c000 0x4>,
+			      <0x4c010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&l3s_clkctrl AM4_L3S_ADC1_CLKCTRL 0>;
+			clock-names = "fck";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x0 0x4c000 0x2000>;
+
+			magadc: magadc@0 {
+				compatible = "ti,am4372-magadc";
+				reg = <0x0 0x2000>;
+				interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&adc_mag_fck>;
+				clock-names = "fck";
+				dmas = <&edma 54 0>, <&edma 55 0>;
+				dma-names = "fifo0", "fifo1";
+				status = "disabled";
+
+				mag {
+					compatible = "ti,am4372-mag";
+				};
+
+				adc {
+					#io-channel-cells = <1>;
+					compatible ="ti,am4372-adc";
+				};
+			};
 		};
 
 		target-module@80000 {			/* 0x48380000, ap 123 42.0 */
diff --git a/dts/src/arm/am43xx-clocks.dtsi b/dts/src/arm/am43xx-clocks.dtsi
index 314fc5975a..66e892fa33 100644
--- a/dts/src/arm/am43xx-clocks.dtsi
+++ b/dts/src/arm/am43xx-clocks.dtsi
@@ -444,6 +444,13 @@
 		reg = <0x422c>;
 	};
 
+	adc_mag_fck: adc_mag_fck@424c {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin_ck>, <&dpll_per_m2_ck>;
+		reg = <0x424c>;
+	};
+
 	l3_gclk: l3_gclk {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
diff --git a/dts/src/arm/armada-38x.dtsi b/dts/src/arm/armada-38x.dtsi
index 9b1a24cc5e..df3c8d1d8f 100644
--- a/dts/src/arm/armada-38x.dtsi
+++ b/dts/src/arm/armada-38x.dtsi
@@ -168,7 +168,7 @@
 			};
 
 			uart0: serial@12000 {
-				compatible = "marvell,armada-38x-uart";
+				compatible = "marvell,armada-38x-uart", "ns16550a";
 				reg = <0x12000 0x100>;
 				reg-shift = <2>;
 				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
@@ -178,7 +178,7 @@
 			};
 
 			uart1: serial@12100 {
-				compatible = "marvell,armada-38x-uart";
+				compatible = "marvell,armada-38x-uart", "ns16550a";
 				reg = <0x12100 0x100>;
 				reg-shift = <2>;
 				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/dts/src/arm/aspeed-bmc-ampere-mtjade.dts b/dts/src/arm/aspeed-bmc-ampere-mtjade.dts
index 3515d55bd3..4c3c3f1a12 100644
--- a/dts/src/arm/aspeed-bmc-ampere-mtjade.dts
+++ b/dts/src/arm/aspeed-bmc-ampere-mtjade.dts
@@ -7,6 +7,50 @@
 	model = "Ampere Mt. Jade BMC";
 	compatible = "ampere,mtjade-bmc", "aspeed,ast2500";
 
+	aliases {
+		/*
+		 *  i2c bus 50-57 assigned to NVMe slot 0-7
+		 */
+		i2c50 = &nvmeslot_0;
+		i2c51 = &nvmeslot_1;
+		i2c52 = &nvmeslot_2;
+		i2c53 = &nvmeslot_3;
+		i2c54 = &nvmeslot_4;
+		i2c55 = &nvmeslot_5;
+		i2c56 = &nvmeslot_6;
+		i2c57 = &nvmeslot_7;
+
+		/*
+		 *  i2c bus 60-67 assigned to NVMe slot 8-15
+		 */
+		i2c60 = &nvmeslot_8;
+		i2c61 = &nvmeslot_9;
+		i2c62 = &nvmeslot_10;
+		i2c63 = &nvmeslot_11;
+		i2c64 = &nvmeslot_12;
+		i2c65 = &nvmeslot_13;
+		i2c66 = &nvmeslot_14;
+		i2c67 = &nvmeslot_15;
+
+		/*
+		 *  i2c bus 70-77 assigned to NVMe slot 16-23
+		 */
+		i2c70 = &nvmeslot_16;
+		i2c71 = &nvmeslot_17;
+		i2c72 = &nvmeslot_18;
+		i2c73 = &nvmeslot_19;
+		i2c74 = &nvmeslot_20;
+		i2c75 = &nvmeslot_21;
+		i2c76 = &nvmeslot_22;
+		i2c77 = &nvmeslot_23;
+
+		/*
+		 *  i2c bus 80-81 assigned to NVMe M2 slot 0-1
+		 */
+		i2c80 = &nvme_m2_0;
+		i2c81 = &nvme_m2_1;
+	};
+
 	chosen {
 		stdout-path = &uart5;
 		bootargs = "console=ttyS4,115200 earlycon";
@@ -330,6 +374,15 @@
 		m25p,fast-read;
 		label = "pnor";
 		/* spi-max-frequency = <100000000>; */
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			uefi@400000 {
+				reg = <0x400000 0x1C00000>;
+				label = "pnor-uefi";
+			};
+		};
 	};
 };
 
@@ -445,6 +498,220 @@
 
 &i2c5 {
 	status = "okay";
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		nvmeslot_0_7: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+		};
+	};
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x71>;
+		i2c-mux-idle-disconnect;
+
+		nvmeslot_8_15: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4>;
+		};
+
+		nvmeslot_16_23: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+		};
+
+	};
+
+	i2c-mux@72 {
+		compatible = "nxp,pca9545";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x72>;
+		i2c-mux-idle-disconnect;
+
+		nvme_m2_0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+		};
+
+		nvme_m2_1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x1>;
+		};
+	};
+};
+
+&nvmeslot_0_7 {
+	status = "okay";
+
+	i2c-mux@75 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x75>;
+		i2c-mux-idle-disconnect;
+
+		nvmeslot_0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+		};
+		nvmeslot_1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x1>;
+		};
+		nvmeslot_2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+		};
+		nvmeslot_3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+		};
+		nvmeslot_4: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4>;
+		};
+		nvmeslot_5: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x5>;
+		};
+		nvmeslot_6: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x6>;
+		};
+		nvmeslot_7: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x7>;
+		};
+
+	};
+};
+
+&nvmeslot_8_15 {
+	status = "okay";
+
+	i2c-mux@75 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x75>;
+		i2c-mux-idle-disconnect;
+
+		nvmeslot_8: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+		};
+		nvmeslot_9: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x1>;
+		};
+		nvmeslot_10: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+		};
+		nvmeslot_11: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+		};
+		nvmeslot_12: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4>;
+		};
+		nvmeslot_13: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x5>;
+		};
+		nvmeslot_14: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x6>;
+		};
+		nvmeslot_15: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x7>;
+		};
+	};
+};
+
+&nvmeslot_16_23 {
+	status = "okay";
+
+	i2c-mux@75 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x75>;
+		i2c-mux-idle-disconnect;
+
+		nvmeslot_16: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+		};
+		nvmeslot_17: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x1>;
+		};
+		nvmeslot_18: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+		};
+		nvmeslot_19: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+		};
+		nvmeslot_20: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4>;
+		};
+		nvmeslot_21: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x5>;
+		};
+		nvmeslot_22: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x6>;
+		};
+		nvmeslot_23: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x7>;
+		};
+	};
 };
 
 &i2c6 {
diff --git a/dts/src/arm/aspeed-bmc-bytedance-g220a.dts b/dts/src/arm/aspeed-bmc-bytedance-g220a.dts
index 01dace8f5e..0d1fb5ccfd 100644
--- a/dts/src/arm/aspeed-bmc-bytedance-g220a.dts
+++ b/dts/src/arm/aspeed-bmc-bytedance-g220a.dts
@@ -260,6 +260,13 @@
 		spi-max-frequency = <50000000>;
 #include "openbmc-flash-layout-64.dtsi"
 	};
+	flash@1 {
+		status = "okay";
+		label = "alt-bmc";
+		m25p,fast-read;
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64-alt.dtsi"
+	};
 };
 
 &spi1 {
@@ -278,6 +285,11 @@
 	status = "okay";
 };
 
+&wdt2 {
+	status = "okay";
+	aspeed,alt-boot;
+};
+
 &gpio {
 	status = "okay";
 	gpio-line-names =
diff --git a/dts/src/arm/aspeed-bmc-facebook-bletchley.dts b/dts/src/arm/aspeed-bmc-facebook-bletchley.dts
new file mode 100644
index 0000000000..f973ea883b
--- /dev/null
+++ b/dts/src/arm/aspeed-bmc-facebook-bletchley.dts
@@ -0,0 +1,756 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2021 Facebook Inc.
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/usb/pd.h>
+
+/ {
+	model = "Facebook Bletchley BMC";
+	compatible = "facebook,bletchley-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial4 = &uart5;
+	};
+
+	chosen {
+		bootargs = "console=ttyS4,57600n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+			<&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+			<&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>,
+			<&adc1 4>, <&adc1 5>, <&adc1 6>, <&adc1 7>;
+	};
+
+	spi_gpio: spi-gpio {
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-sck = <&gpio0 ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
+		gpio-mosi = <&gpio0 ASPEED_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
+		gpio-miso = <&gpio0 ASPEED_GPIO(Z, 5) GPIO_ACTIVE_HIGH>;
+		num-chipselects = <1>;
+		cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
+
+		tpmdev@0 {
+			compatible = "tcg,tpm_tis-spi";
+			spi-max-frequency = <33000000>;
+			reg = <0>;
+		};
+	};
+
+	switchphy: ethernet-phy@0 {
+		// Fixed link
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		sys_log_id {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&front_leds 0 GPIO_ACTIVE_HIGH>;
+		};
+		fan0_blue {
+			retain-state-shutdown;
+			default-state = "on";
+			gpios = <&fan_ioexp 8 GPIO_ACTIVE_HIGH>;
+		};
+		fan1_blue {
+			retain-state-shutdown;
+			default-state = "on";
+			gpios = <&fan_ioexp 9 GPIO_ACTIVE_HIGH>;
+		};
+		fan2_blue {
+			retain-state-shutdown;
+			default-state = "on";
+			gpios = <&fan_ioexp 10 GPIO_ACTIVE_HIGH>;
+		};
+		fan3_blue {
+			retain-state-shutdown;
+			default-state = "on";
+			gpios = <&fan_ioexp 11 GPIO_ACTIVE_HIGH>;
+		};
+		fan0_amber {
+			retain-state-shutdown;
+			default-state = "off";
+			gpios = <&fan_ioexp 12 GPIO_ACTIVE_HIGH>;
+		};
+		fan1_amber {
+			retain-state-shutdown;
+			default-state = "off";
+			gpios = <&fan_ioexp 13 GPIO_ACTIVE_HIGH>;
+		};
+		fan2_amber {
+			retain-state-shutdown;
+			default-state = "off";
+			gpios = <&fan_ioexp 14 GPIO_ACTIVE_HIGH>;
+		};
+		fan3_amber {
+			retain-state-shutdown;
+			default-state = "off";
+			gpios = <&fan_ioexp 15 GPIO_ACTIVE_HIGH>;
+		};
+		sled0_amber {
+			retain-state-shutdown;
+			default-state = "off";
+			gpios = <&sled0_leds 0 GPIO_ACTIVE_LOW>;
+		};
+		sled0_blue {
+			retain-state-shutdown;
+			default-state = "off";
+			gpios = <&sled0_leds 1 GPIO_ACTIVE_LOW>;
+		};
+		sled1_amber {
+			retain-state-shutdown;
+			default-state = "off";
+			gpios = <&sled1_leds 0 GPIO_ACTIVE_LOW>;
+		};
+		sled1_blue {
+			retain-state-shutdown;
+			default-state = "off";
+			gpios = <&sled1_leds 1 GPIO_ACTIVE_LOW>;
+		};
+		sled2_amber {
+			retain-state-shutdown;
+			default-state = "off";
+			gpios = <&sled2_leds 0 GPIO_ACTIVE_LOW>;
+		};
+		sled2_blue {
+			retain-state-shutdown;
+			default-state = "off";
+			gpios = <&sled2_leds 1 GPIO_ACTIVE_LOW>;
+		};
+		sled3_amber {
+			retain-state-shutdown;
+			default-state = "off";
+			gpios = <&sled3_leds 0 GPIO_ACTIVE_LOW>;
+		};
+		sled3_blue {
+			retain-state-shutdown;
+			default-state = "off";
+			gpios = <&sled3_leds 1 GPIO_ACTIVE_LOW>;
+		};
+		sled4_amber {
+			retain-state-shutdown;
+			default-state = "off";
+			gpios = <&sled4_leds 0 GPIO_ACTIVE_LOW>;
+		};
+		sled4_blue {
+			retain-state-shutdown;
+			default-state = "off";
+			gpios = <&sled4_leds 1 GPIO_ACTIVE_LOW>;
+		};
+		sled5_amber {
+			retain-state-shutdown;
+			default-state = "off";
+			gpios = <&sled5_leds 0 GPIO_ACTIVE_LOW>;
+		};
+		sled5_blue {
+			retain-state-shutdown;
+			default-state = "off";
+			gpios = <&sled5_leds 1 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&mac2 {
+	status = "okay";
+	phy-mode = "rgmii";
+	phy-handle = <&switchphy>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii3_default>;
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&rtc {
+	status = "okay";
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-128.dtsi"
+	};
+};
+
+&spi2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi2_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+		spi-max-frequency = <100000000>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	/* TODO: Add ADC INA230 */
+
+	mp5023@40 {
+		compatible = "mps,mp5023";
+		reg = <0x40>;
+	};
+
+	tmp421@4f {
+		compatible = "ti,tmp421";
+		reg = <0x4f>;
+	};
+
+	sled0_ioexp: pca9539@76 {
+		compatible = "nxp,pca9539";
+		reg = <0x76>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"SLED0_MS_DETECT1","SLED0_VBUS_BMC_EN","SLED0_INA230_ALERT","SLED0_P12V_STBY_ALERT",
+		"SLED0_SSD_ALERT","SLED0_MS_DETECT0","SLED0_RST_CCG5","SLED0_FUSB302_INT",
+		"SLED0_MD_STBY_RESET","SLED0_MD_IOEXP_EN_FAULT","SLED0_MD_DIR","SLED0_MD_DECAY",
+		"SLED0_MD_MODE1","SLED0_MD_MODE2","SLED0_MD_MODE3","power-host0";
+	};
+
+	sled0_leds: pca9552@67 {
+		compatible = "nxp,pca9552";
+		reg = <0x67>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"led-sled0-amber","led-sled0-blue","SLED0_RST_IOEXP","",
+		"","","","",
+		"","","","",
+		"","","","";
+	};
+
+	sled0_fusb302: typec-portc@22 {
+		compatible = "fcs,fusb302";
+		reg = <0x22>;
+
+		connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			power-role = "dual";
+			try-power-role = "sink";
+			data-role = "dual";
+			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
+					PDO_VAR(3000, 12000, 3000)
+					PDO_PPS_APDO(3000, 11000, 3000)>;
+			op-sink-microwatt = <10000000>;
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	/* TODO: Add ADC INA230 */
+
+	mp5023@40 {
+		compatible = "mps,mp5023";
+		reg = <0x40>;
+	};
+
+	tmp421@4f {
+		compatible = "ti,tmp421";
+		reg = <0x4f>;
+	};
+
+	sled1_ioexp: pca9539@76 {
+		compatible = "nxp,pca9539";
+		reg = <0x76>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"SLED1_MS_DETECT1","SLED1_VBUS_BMC_EN","SLED1_INA230_ALERT","SLED1_P12V_STBY_ALERT",
+		"SLED1_SSD_ALERT","SLED1_MS_DETECT0","SLED1_RST_CCG5","SLED1_FUSB302_INT",
+		"SLED1_MD_STBY_RESET","SLED1_MD_IOEXP_EN_FAULT","SLED1_MD_DIR","SLED1_MD_DECAY",
+		"SLED1_MD_MODE1","SLED1_MD_MODE2","SLED1_MD_MODE3","power-host1";
+	};
+
+	sled1_leds: pca9552@67 {
+		compatible = "nxp,pca9552";
+		reg = <0x67>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"led-sled1-amber","led-sled1-blue","SLED1_RST_IOEXP","",
+		"","","","",
+		"","","","",
+		"","","","";
+	};
+
+	sled1_fusb302: typec-portc@22 {
+		compatible = "fcs,fusb302";
+		reg = <0x22>;
+
+		connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			power-role = "dual";
+			try-power-role = "sink";
+			data-role = "dual";
+			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
+					PDO_VAR(3000, 12000, 3000)
+					PDO_PPS_APDO(3000, 11000, 3000)>;
+			op-sink-microwatt = <10000000>;
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+	/* TODO: Add ADC INA230 */
+
+	mp5023@40 {
+		compatible = "mps,mp5023";
+		reg = <0x40>;
+	};
+
+	tmp421@4f {
+		compatible = "ti,tmp421";
+		reg = <0x4f>;
+	};
+
+	sled2_ioexp: pca9539@76 {
+		compatible = "nxp,pca9539";
+		reg = <0x76>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"SLED2_MS_DETECT1","SLED2_VBUS_BMC_EN","SLED2_INA230_ALERT","SLED2_P12V_STBY_ALERT",
+		"SLED2_SSD_ALERT","SLED2_MS_DETECT0","SLED2_RST_CCG5","SLED2_FUSB302_INT",
+		"SLED2_MD_STBY_RESET","SLED2_MD_IOEXP_EN_FAULT","SLED2_MD_DIR","SLED2_MD_DECAY",
+		"SLED2_MD_MODE1","SLED2_MD_MODE2","SLED2_MD_MODE3","power-host2";
+	};
+
+	sled2_leds: pca9552@67 {
+		compatible = "nxp,pca9552";
+		reg = <0x67>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"led-sled2-amber","led-sled2-blue","SLED2_RST_IOEXP","",
+		"","","","",
+		"","","","",
+		"","","","";
+	};
+
+	sled2_fusb302: typec-portc@22 {
+		compatible = "fcs,fusb302";
+		reg = <0x22>;
+
+		connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			power-role = "dual";
+			try-power-role = "sink";
+			data-role = "dual";
+			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
+					PDO_VAR(3000, 12000, 3000)
+					PDO_PPS_APDO(3000, 11000, 3000)>;
+			op-sink-microwatt = <10000000>;
+		};
+	};
+};
+
+&i2c3 {
+	status = "okay";
+	/* TODO: Add ADC INA230 */
+
+	mp5023@40 {
+		compatible = "mps,mp5023";
+		reg = <0x40>;
+	};
+
+	tmp421@4f {
+		compatible = "ti,tmp421";
+		reg = <0x4f>;
+	};
+
+	sled3_ioexp: pca9539@76 {
+		compatible = "nxp,pca9539";
+		reg = <0x76>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"SLED3_MS_DETECT1","SLED3_VBUS_BMC_EN","SLED3_INA230_ALERT","SLED3_P12V_STBY_ALERT",
+		"SLED3_SSD_ALERT","SLED3_MS_DETECT0","SLED3_RST_CCG5","SLED3_FUSB302_INT",
+		"SLED3_MD_STBY_RESET","SLED3_MD_IOEXP_EN_FAULT","SLED3_MD_DIR","SLED3_MD_DECAY",
+		"SLED3_MD_MODE1","SLED3_MD_MODE2","SLED3_MD_MODE3","power-host3";
+	};
+
+	sled3_leds: pca9552@67 {
+		compatible = "nxp,pca9552";
+		reg = <0x67>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"led-sled3-amber","led-sled3-blue","SLED3_RST_IOEXP","",
+		"","","","",
+		"","","","",
+		"","","","";
+	};
+
+	sled3_fusb302: typec-portc@22 {
+		compatible = "fcs,fusb302";
+		reg = <0x22>;
+
+		connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			power-role = "dual";
+			try-power-role = "sink";
+			data-role = "dual";
+			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
+					PDO_VAR(3000, 12000, 3000)
+					PDO_PPS_APDO(3000, 11000, 3000)>;
+			op-sink-microwatt = <10000000>;
+		};
+	};
+};
+
+&i2c4 {
+	status = "okay";
+	/* TODO: Add ADC INA230 */
+
+	mp5023@40 {
+		compatible = "mps,mp5023";
+		reg = <0x40>;
+	};
+
+	tmp421@4f {
+		compatible = "ti,tmp421";
+		reg = <0x4f>;
+	};
+
+	sled4_ioexp: pca9539@76 {
+		compatible = "nxp,pca9539";
+		reg = <0x76>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"SLED4_MS_DETECT1","SLED4_VBUS_BMC_EN","SLED4_INA230_ALERT","SLED4_P12V_STBY_ALERT",
+		"SLED4_SSD_ALERT","SLED4_MS_DETECT0","SLED4_RST_CCG5","SLED4_FUSB302_INT",
+		"SLED4_MD_STBY_RESET","SLED4_MD_IOEXP_EN_FAULT","SLED4_MD_DIR","SLED4_MD_DECAY",
+		"SLED4_MD_MODE1","SLED4_MD_MODE2","SLED4_MD_MODE3","power-host4";
+	};
+
+	sled4_leds: pca9552@67 {
+		compatible = "nxp,pca9552";
+		reg = <0x67>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"led-sled4-amber","led-sled4-blue","SLED4_RST_IOEXP","",
+		"","","","",
+		"","","","",
+		"","","","";
+	};
+
+	sled4_fusb302: typec-portc@22 {
+		compatible = "fcs,fusb302";
+		reg = <0x22>;
+
+		connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			power-role = "dual";
+			try-power-role = "sink";
+			data-role = "dual";
+			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
+					PDO_VAR(3000, 12000, 3000)
+					PDO_PPS_APDO(3000, 11000, 3000)>;
+			op-sink-microwatt = <10000000>;
+		};
+	};
+};
+
+&i2c5 {
+	status = "okay";
+	/* TODO: Add ADC INA230 */
+
+	mp5023@40 {
+		compatible = "mps,mp5023";
+		reg = <0x40>;
+	};
+
+	tmp421@4f {
+		compatible = "ti,tmp421";
+		reg = <0x4f>;
+	};
+
+	sled5_ioexp: pca9539@76 {
+		compatible = "nxp,pca9539";
+		reg = <0x76>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"SLED5_MS_DETECT1","SLED5_VBUS_BMC_EN","SLED5_INA230_ALERT","SLED5_P12V_STBY_ALERT",
+		"SLED5_SSD_ALERT","SLED5_MS_DETECT0","SLED5_RST_CCG5","SLED5_FUSB302_INT",
+		"SLED5_MD_STBY_RESET","SLED5_MD_IOEXP_EN_FAULT","SLED5_MD_DIR","SLED5_MD_DECAY",
+		"SLED5_MD_MODE1","SLED5_MD_MODE2","SLED5_MD_MODE3","power-host5";
+	};
+
+	sled5_leds: pca9552@67 {
+		compatible = "nxp,pca9552";
+		reg = <0x67>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"led-sled5-amber","led-sled5-blue","SLED5_RST_IOEXP","",
+		"","","","",
+		"","","","",
+		"","","","";
+	};
+
+	sled5_fusb302: typec-portc@22 {
+		compatible = "fcs,fusb302";
+		reg = <0x22>;
+
+		connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			power-role = "dual";
+			try-power-role = "sink";
+			data-role = "dual";
+			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
+					PDO_VAR(3000, 12000, 3000)
+					PDO_PPS_APDO(3000, 11000, 3000)>;
+			op-sink-microwatt = <10000000>;
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	eeprom@56 {
+		compatible = "atmel,24c64";
+		reg = <0x56>;
+	};
+
+	rtc@51 {
+		compatible = "nxp,pcf85263";
+		reg = <0x51>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	eeprom@54 {
+		compatible = "atmel,24c64";
+		reg = <0x54>;
+	};
+};
+
+&i2c9 {
+	status = "okay";
+
+	tmp421@4f {
+		compatible = "ti,tmp421";
+		reg = <0x4f>;
+	};
+};
+
+&i2c10 {
+	status = "okay";
+
+	tmp421@4f {
+		compatible = "ti,tmp421";
+		reg = <0x4f>;
+	};
+
+	hdc1080@40 {
+		compatible = "ti,hdc1080";
+		reg = <0x40>;
+	};
+
+	front_leds: pca9552@67 {
+		compatible = "nxp,pca9552";
+		reg = <0x67>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"led-fault-identify","power-p5v-stby-good",
+		"power-p1v0-dvdd-good","power-p1v0-avdd-good",
+		"","","","",
+		"","","","",
+		"","","","";
+	};
+};
+
+&i2c12 {
+	status = "okay";
+
+	adm1278@11 {
+		compatible = "adi,adm1278";
+		reg = <0x11>;
+	};
+
+	tmp421@4c {
+		compatible = "ti,tmp421";
+		reg = <0x4c>;
+	};
+
+	tmp421@4d {
+		compatible = "ti,tmp421";
+		reg = <0x4d>;
+	};
+
+	fan_ioexp: pca9552@67 {
+		compatible = "nxp,pca9552";
+		reg = <0x67>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"presence-fan0","presence-fan1",
+		"presence-fan2","presence-fan3",
+		"power-fan0-good","power-fan1-good",
+		"power-fan2-good","power-fan3-good",
+		"","","","",
+		"","","","";
+	};
+};
+
+&i2c13 {
+	multi-master;
+	aspeed,hw-timeout-ms = <1000>;
+	status = "okay";
+};
+
+&gpio0 {
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","","","",
+	/*B0-B7*/	"","","SEL_SPI2_MUX","SPI2_MUX1",
+			"SPI2_MUX2","SPI2_MUX3","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"","","","","","","","",
+	/*F0-F7*/	"","","","","","","","",
+	/*G0-G7*/	"","SWITCH_FRU_MUX","","","","","","",
+	/*H0-H7*/	"presence-riser1","presence-riser2",
+			"presence-sled0","presence-sled1",
+			"presence-sled2","presence-sled3",
+			"presence-sled4","presence-sled5",
+	/*I0-I7*/	"REV_ID0","","REV_ID1","REV_ID2",
+			"","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"ALERT_SLED0","ALERT_SLED1",
+			"ALERT_SLED2","ALERT_SLED3",
+			"ALERT_SLED4","ALERT_SLED5",
+			"P12V_AUX_ALERT1","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","",
+			"","BOARD_ID0","BOARD_ID1","BOARD_ID2",
+	/*P0-P7*/	"","","","","","","","",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","","BAT_DETECT",
+			"BMC_BT_WP0","BMC_BT_WP1","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","RST_BMC_MVL","","",
+			"USB2_SEL0_A","USB2_SEL1_A",
+			"USB2_SEL0_B","USB2_SEL1_B",
+	/*W0-W7*/	"RST_FRONT_IOEXP","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","BSM_FLASH_LATCH","","","","","",
+	/*Z0-Z7*/	"","","","","","","","";
+};
+
+&adc0 {
+	vref = <1800>;
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+		&pinctrl_adc2_default &pinctrl_adc3_default
+		&pinctrl_adc4_default &pinctrl_adc5_default
+		&pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+	vref = <2500>;
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+		&pinctrl_adc10_default &pinctrl_adc11_default
+		&pinctrl_adc12_default &pinctrl_adc13_default
+		&pinctrl_adc14_default &pinctrl_adc15_default>;
+};
diff --git a/dts/src/arm/aspeed-bmc-ibm-everest.dts b/dts/src/arm/aspeed-bmc-ibm-everest.dts
index f42e2d776b..22c06ff7a7 100644
--- a/dts/src/arm/aspeed-bmc-ibm-everest.dts
+++ b/dts/src/arm/aspeed-bmc-ibm-everest.dts
@@ -280,7 +280,7 @@
 	/*L0-L7*/	"","","","","","","","",
 	/*M0-M7*/	"","","","","","","","",
 	/*N0-N7*/	"","","","","","","","",
-	/*O0-O7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","usb-power","","","","",
 	/*P0-P7*/	"","","","","led-pcieslot-power","","","",
 	/*Q0-Q7*/	"","","regulator-standby-faulted","","","","","",
 	/*R0-R7*/	"bmc-tpm-reset","power-chassis-control","power-chassis-good","","","I2C_FLASH_MICRO_N","","",
@@ -292,6 +292,12 @@
 	/*X0-X7*/	"","","","","","","","",
 	/*Y0-Y7*/	"","","","","","","","",
 	/*Z0-Z7*/   "","","","","","","","";
+
+	usb_power {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(O, 3) GPIO_ACTIVE_LOW>;
+		output-high;
+	};
 };
 
 &i2c0 {
@@ -1881,6 +1887,11 @@
 
 &i2c12 {
 	status = "okay";
+
+	tpm@2e {
+		compatible = "nuvoton,npct75x", "tcg,tpm-tis-i2c";
+		reg = <0x2e>;
+	};
 };
 
 &i2c13 {
@@ -2375,6 +2386,10 @@
 	};
 };
 
+&ehci0 {
+	status = "okay";
+};
+
 &ehci1 {
 	status = "okay";
 };
diff --git a/dts/src/arm/aspeed-bmc-ibm-rainier.dts b/dts/src/arm/aspeed-bmc-ibm-rainier.dts
index 866f32cdcc..c479742198 100644
--- a/dts/src/arm/aspeed-bmc-ibm-rainier.dts
+++ b/dts/src/arm/aspeed-bmc-ibm-rainier.dts
@@ -275,6 +275,12 @@
 		output-high;
 		line-name = "I2C3_MUX_OE_N";
 	};
+
+	usb_power {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(O, 3) GPIO_ACTIVE_LOW>;
+		output-high;
+	};
 };
 
 &emmc_controller {
@@ -2061,6 +2067,11 @@
 &i2c12 {
 	status = "okay";
 
+	tpm@2e {
+		compatible = "nuvoton,npct75x";
+		reg = <0x2e>;
+	};
+
 	eeprom@50 {
 		compatible = "atmel,24c64";
 		reg = <0x50>;
diff --git a/dts/src/arm/aspeed-bmc-tyan-s7106.dts b/dts/src/arm/aspeed-bmc-tyan-s7106.dts
index 68f332ee18..aff27c1d4b 100644
--- a/dts/src/arm/aspeed-bmc-tyan-s7106.dts
+++ b/dts/src/arm/aspeed-bmc-tyan-s7106.dts
@@ -3,6 +3,7 @@
 
 #include "aspeed-g5.dtsi"
 #include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 
 / {
 	model = "Tyan S7106 BMC";
@@ -127,8 +128,23 @@
 	status = "okay";
 };
 
+&uart_routing {
+	status = "okay";
+};
+
 &vuart {
 	status = "okay";
+
+	/* We enable the VUART here, but leave it in a state that does
+	 * not interfere with the SuperIO. The goal is to have both the
+	 * VUART and the SuperIO available and decide at runtime whether
+	 * the VUART should actually be used. For that reason, configure
+	 * an "invalid" IO address and an IRQ that is not used by the
+	 * BMC.
+	 */
+
+	aspeed,lpc-io-reg = <0xffff>;
+	aspeed,lpc-interrupts = <15 IRQ_TYPE_LEVEL_HIGH>;
 };
 
 &lpc_ctrl {
@@ -213,6 +229,30 @@
 	nct7802@28 {
 		compatible = "nuvoton,nct7802";
 		reg = <0x28>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel@0 { /* LTD */
+			reg = <0>;
+		};
+
+		channel@1 { /* RTD1 */
+			reg = <1>;
+			sensor-type = "temperature";
+			temperature-mode = "thermistor";
+		};
+
+		channel@2 { /* RTD2 */
+			reg = <2>;
+			sensor-type = "temperature";
+			temperature-mode = "thermistor";
+		};
+
+		channel@3 { /* RTD3 */
+			reg = <3>;
+			sensor-type = "temperature";
+		};
 	};
 
 	/* Also connected to:
diff --git a/dts/src/arm/aspeed-bmc-tyan-s8036.dts b/dts/src/arm/aspeed-bmc-tyan-s8036.dts
new file mode 100644
index 0000000000..708ee78e4b
--- /dev/null
+++ b/dts/src/arm/aspeed-bmc-tyan-s8036.dts
@@ -0,0 +1,470 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Tyan S8036 BMC";
+	compatible = "tyan,s8036-bmc", "aspeed,ast2500";
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlycon";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		p2a_memory: region@987f0000 {
+			no-map;
+			reg = <0x987f0000 0x00010000>; /* 64KB */
+		};
+
+		vga_memory: framebuffer@9f000000 {
+			no-map;
+			reg = <0x9f000000 0x01000000>; /* 16M */
+		};
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>; /* 16M */
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		identify {
+			gpios = <&gpio ASPEED_GPIO(A, 2) GPIO_ACTIVE_LOW>;
+		};
+
+		heartbeat {
+			gpios = <&gpio ASPEED_GPIO(E, 7) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+			<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+			<&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
+			<&adc 12>, <&adc 13>, <&adc 14>;
+	};
+
+	iio-hwmon-battery {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 15>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		label = "bmc";
+		status = "okay";
+		m25p,fast-read;
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		label = "pnor";
+		m25p,fast-read;
+	};
+};
+
+&uart1 {
+	/* Rear RS-232 connector */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+			&pinctrl_rxd1_default>;
+};
+
+&uart2 {
+	/* RS-232 connector on header */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd2_default
+			&pinctrl_rxd2_default>;
+};
+
+&uart3 {
+	/* Alternative to vuart to internally connect (route) to uart1
+	 * when vuart cannot be used due to BIOS limitations.
+	 */
+	status = "okay";
+};
+
+&uart4 {
+	/* Alternative to vuart to internally connect (route) to the
+	 * external port usually used by uart1 when vuart cannot be
+	 * used due to BIOS limitations.
+	 */
+	status = "okay";
+};
+
+&uart5 {
+	/* BMC "debug" (console) UART; connected to RS-232 connector
+	 * on header; selectable via jumpers as alternative to uart2
+	 */
+	status = "okay";
+};
+
+&uart_routing {
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+
+	/* We enable the VUART here, but leave it in a state that does
+	 * not interfere with the SuperIO. The goal is to have both the
+	 * VUART and the SuperIO available and decide at runtime whether
+	 * the VUART should actually be used. For that reason, configure
+	 * an "invalid" IO address and an IRQ that is not used by the
+	 * BMC.
+	 */
+	aspeed,lpc-io-reg = <0xffff>;
+	aspeed,lpc-interrupts = <15 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lpc_ctrl {
+	status = "okay";
+};
+
+&p2a {
+	status = "okay";
+	memory-region = <&p2a_memory>;
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>;
+};
+
+&adc {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default
+			&pinctrl_pwm1_default
+			&pinctrl_pwm3_default
+			&pinctrl_pwm4_default>;
+
+	/* CPU fan */
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+
+	/* PWM group for chassis fans #1, #2, #3 and #4 */
+	fan@2 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+	};
+
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+	};
+
+	fan@4 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+	};
+
+	fan@5 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x05>;
+	};
+
+	/* PWM group for chassis fans #5 and #6  */
+	fan@6 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06>;
+	};
+
+	fan@7 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x07>;
+	};
+};
+
+&i2c0 {
+	/* Directly connected to Sideband-Temperature Sensor Interface (APML) */
+	status = "okay";
+};
+
+&i2c1 {
+	/* Directly connected to IPMB HDR. */
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	/* BMC EEPROM, incl. mainboard FRU */
+	eeprom@50 {
+		compatible = "atmel,24c256";
+		reg = <0x50>;
+	};
+	/* Also connected to:
+	 * - BCM5720
+	 * - FPGA
+	 * - FAN HDR
+	 * - FPIO HDR
+	 */
+};
+
+&i2c3 {
+	status = "okay";
+
+	/* PSU1 FRU @ 0xA0 */
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+	};
+
+	/* PSU2 FRU @ 0xA2 */
+	eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+	};
+
+	/* PSU1 @ 0xB0 */
+	power-supply@58 {
+		compatible = "pmbus";
+		reg = <0x58>;
+	};
+
+	/* PSU2 @ 0xB2 */
+	power-supply@59 {
+		compatible = "pmbus";
+		reg = <0x59>;
+	};
+
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+	/* Hardware monitor with temperature sensors */
+	nct7802@28 {
+		compatible = "nuvoton,nct7802";
+		reg = <0x28>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel@0 { /* LTD */
+			reg = <0>;
+			status = "okay";
+		};
+
+		channel@1 { /* RTD1 */
+			reg = <1>;
+			status = "okay";
+			sensor-type = "temperature";
+			temperature-mode = "thermistor";
+		};
+
+		channel@2 { /* RTD2 */
+			reg = <2>;
+			status = "okay";
+			sensor-type = "temperature";
+			temperature-mode = "thermistor";
+		};
+
+		channel@3 { /* RTD3 */
+			reg = <3>;
+			status = "okay";
+			sensor-type = "temperature";
+		};
+	};
+
+	/* Also connected to:
+	 * - PCA9544
+	 * - CLK BUFF
+	 * - OCP FRU
+	 */
+};
+
+&i2c6 {
+	status = "okay";
+	/* Connected to:
+	 * - PCA9548 @0xE0
+	 * - PCA9548 @0xE2
+	 * - PCA9544 @0xE4
+	 */
+};
+
+&i2c7 {
+	status = "okay";
+
+	/* Connected to:
+	 * - PCH SMBUS #4
+	 */
+};
+
+&i2c8 {
+	status = "okay";
+
+	/* Not connected */
+};
+
+&mac0 {
+	status = "okay";
+	use-ncsi;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+};
+
+&mac1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&ibt {
+	status = "okay";
+};
+
+&kcs1 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca8>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+};
+
+/* Enable BMC VGA output to show an early (pre-BIOS) boot screen */
+&gfx {
+	status = "okay";
+	memory-region = <&gfx_memory>;
+};
+
+/* We're following the GPIO naming as defined at
+ * https://github.com/openbmc/docs/blob/master/designs/device-tree-gpio-naming.md.
+ *
+ * Notes on led-identify and id-button:
+ * - A physical button is connected to id-button which
+ *   triggers the clock on a D flip-flop. The /Q output of the
+ *   flip-flop drives its D input.
+ * - The flip-flop's Q output drives led-identify which is
+ *   connected to LEDs.
+ * - With that, every button press toggles the LED between on and off.
+ *
+ * Notes on power-, reset- and nmi- button and control:
+ * - The -button signals can be used to monitor physical buttons.
+ * - The -control signals can be used to actuate the specific
+ *   operation.
+ * - In hardware, the -button signals are connected to the -control
+ *   signals through drivers with the -control signals being
+ *   protected through diodes.
+ */
+&gpio {
+	status = "okay";
+	gpio-line-names =
+	/*A0*/		"",
+	/*A1*/		"",
+	/*A2*/		"led-identify", /* in/out: BMC_CHASSIS_ID_LED_L */
+	/*A3*/		"",
+	/*A4*/		"",
+	/*A5*/		"",
+	/*A6*/		"",
+	/*A7*/		"",
+	/*B0-B7*/	"","","","","","","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0*/		"",
+	/*D1*/		"",
+	/*D2*/		"power-chassis-good", /* in: PWR_GOOD_LED -- Check if this is Z3?*/
+	/*D3*/		"platform-reset", /* in: RESET_LED_L */
+	/*D4*/		"",
+	/*D5*/		"",
+	/*D6*/		"",
+	/*D7*/		"",
+	/*E0*/		"power-button", /* in: BMC_SYS_MON_PWR_BTN_L */
+	/*E1*/		"power-chassis-control", /* out: BMC_ASSERT_PWR_BTN */
+	/*E2*/		"reset-button", /* in: BMC_SYS_MOS_RST_BTN_L*/
+	/*E3*/		"reset-control", /* out: BMC_ASSERT_RST_BTN */
+	/*E4*/		"nmi-button", /* in: BMC_SYS_MON_NMI_BTN_L */
+	/*E5*/		"nmi-control", /* out: BMC_ASSERT_NMI_BTN */
+	/*E6*/		"TSI_RESERT",
+	/*E7*/		"led-heartbeat", /* out: BMC_GPIOE7 */
+	/*F0*/		"",
+	/*F1*/		"clear-cmos-control", /* out: BMC_ASSERT_CLR_CMOS_L */
+	/*F2*/		"",
+	/*F3*/		"",
+	/*F4*/		"led-fault", /* out: BMC_HWM_FAULT_LED_L */
+	/*F5*/		"BMC_SYS_FAULT_LED_L",
+	/*F6*/		"BMC_ASSERT_BIOS_WP_L",
+	/*F7*/		"",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"","","","","","","","",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"","","","","","","","",
+	/*Q0*/		"",
+	/*Q1*/		"",
+	/*Q2*/		"",
+	/*Q3*/		"",
+	/*Q4*/		"",
+	/*Q5*/		"",
+	/*Q6*/		"id-button", /* in: BMC_CHASSIS_ID_BTN_L */
+	/*Q7*/		"",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","","","","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z2*/	"","","",
+	/*Z3*/		"post-complete", /* BMC_SYS_MON_PWROK */
+	/*Z4-Z7*/	"","","","",
+	/*AA0*/		"",
+	/*AA1*/		"",
+	/*AA2*/		"",
+	/*AA3*/		"",
+	/*AA4*/		"",
+	/*AA5*/		"",
+	/*AA6*/		"",
+	/*AA7*/		"BMC_ASSERT_BMC_READY",
+	/*AB0*/		"BMC_SPD_SEL",
+	/*AB1-AB7*/	"","","","","","","";
+};
diff --git a/dts/src/arm/aspeed-bmc-vegman-n110.dts b/dts/src/arm/aspeed-bmc-vegman-n110.dts
new file mode 100644
index 0000000000..24319267d5
--- /dev/null
+++ b/dts/src/arm/aspeed-bmc-vegman-n110.dts
@@ -0,0 +1,149 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (C) 2021 YADRO
+/dts-v1/;
+
+#include "aspeed-bmc-vegman.dtsi"
+
+/ {
+	model = "YADRO VEGMAN N110 BMC";
+	compatible = "yadro,vegman-n110-bmc", "aspeed,ast2500";
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names =
+	/*A0-A7*/	"CHASSIS_INTRUSION","CASE_OPEN_FAULT_RST","","","SPEAKER_BMC","FM_FORCE_BMC_UPDATE","","",
+	/*B0-B7*/	"","","","","","","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"RESET_BUTTON","RESET_OUT","POWER_BUTTON","POWER_OUT","","","","",
+	/*F0-F7*/	"NMI_OUT","PCIE_NIC_ALERT","","","SKT0_FAULT_LED","","RST_RGMII_PHYRST_DNP","",
+	/*G0-G7*/	"CPU_ERR2","CPU_CATERR","PCH_BMC_THERMTRIP","","IRQ_NMI_EVENT","","","",
+	/*H0-H7*/	"PWRGD_P3V3_RISER1","PWRGD_P3V3_RISER2","PWRGD_P3V3_RISER3","","MIO_BIOS_SEL","_SPI_FLASH_HOLD","_SPI_FLASH_WP","FM_240VA_STATUS",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","","","","","_SPI2_BMC_CS_SEL",
+	/*P0-P7*/	"","","","","","","","",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"_SPI_RMM4_LITE_CS","","","","","","","",
+	/*S0-S7*/	"_SPI2_BMC_CS1","","","IRQ_SML0_ALERT_MUX","FP_LED_STATUS_GREEN","FP_LED_STATUS_AMBER","FP_ID_LED","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"SIO_S3","SIO_S5","","SIO_ONCONTROL","","","","",
+	/*Z0-Z7*/	"FM_BMC_PWR_BTN","SIO_POWER_GOOD","FM_BMC_PWRBTN_OUT","FM_BMC_PCH_SCI_LPC","","","","",
+	/*AA0-AA7*/	"","IRQ_SML1_PMBUS_ALERT","FM_PVCCIN_CPU0_PWR_IN_ALERT","FM_PVCCIN_CPU1_PWR_IN_ALERT","BMC_SYS_PWR_FAULT","BMC_SYS_PWR_OK","SMI","POST_COMPLETE",
+	/*AB0-AB7*/	"FM_CPU_BMCINIT","NMI_BUTTON","ID_BUTTON","PS_PWROK","","","","",
+	/*AC0-AC7*/	"","","","","","","","";
+};
+
+&sgpio {
+	ngpios = <80>;
+	bus-frequency = <2000000>;
+	status = "okay";
+	/* SGPIO lines. even: input, odd: output */
+	gpio-line-names =
+	/*A0-A7*/	"CPU1_PRESENCE","","CPU1_THERMTRIP","","CPU1_VRHOT","","CPU1_FIVR_FAULT","","CPU1_MEM_ABCD_VRHOT","","CPU1_MEM_EFGH_VRHOT","","","","","",
+	/*B0-B7*/	"CPU1_MISMATCH","","CPU1_MEM_THERM_EVENT","","CPU2_PRESENCE","","CPU2_THERMTRIP","","CPU2_VRHOT","","CPU2_FIVR_FAULT","","CPU2_MEM_ABCD_VRHOT","","CPU2_MEM_EFGH_VRHOT","",
+	/*C0-C7*/	"","","","","CPU2_MISMATCH","","CPU2_MEM_THERM_EVENT","","","","","","","","","",
+	/*D0-D7*/	"","","","","","","","","","","","","","","","",
+	/*E0-E7*/	"","","","","","","","","","","","","","","","",
+	/*F0-F7*/	"SGPIO_PLD_MINOR_REV_BIT0","","SGPIO_PLD_MINOR_REV_BIT1","","SGPIO_PLD_MINOR_REV_BIT2","","SGPIO_PLD_MINOR_REV_BIT3","","SGPIO_PLD_MAJOR_REV_BIT0","","SGPIO_PLD_MAJOR_REV_BIT1","","SGPIO_PLD_MAJOR_REV_BIT2","","SGPIO_PLD_MAJOR_REV_BIT3","",
+	/*G0-G7*/	"MAIN_PLD_MINOR_REV_BIT0","","MAIN_PLD_MINOR_REV_BIT1","","MAIN_PLD_MINOR_REV_BIT2","","MAIN_PLD_MINOR_REV_BIT3","","MAIN_PLD_MAJOR_REV_BIT0","","MAIN_PLD_MAJOR_REV_BIT1","","MAIN_PLD_MAJOR_REV_BIT2","","MAIN_PLD_MAJOR_REV_BIT3","",
+	/*H0-H7*/	"","","","","","","","","","","","","","","","",
+	/*I0-I7*/	"","","","","","","","","","","","","","","","",
+	/*J0-J7*/	"","","","","","","","","","","","","","","","";
+};
+
+&i2c11 {
+	/* SMB_BMC_MGMT_LVC3 */
+	gpio@21 {
+		compatible = "nxp,pcal9535";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+		/*IO0.0-0.7*/	"", "", "", "", "", "", "PE_PCH_SCR_CLKREQ", "",
+		/*IO1.0-1.7*/	"", "PE_PCH_MEZ_PRSNT", "PE_PCH_MEZ_PRSNT_", "NIC_4_PE_PRSNT", "NIC_3_PE_PRSNT", "NIC_2_PE_PRSNT", "NIC_1_PE_PRSNT", "";
+	};
+	gpio@27 {
+		compatible = "nxp,pca9698";
+		reg = <0x27>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+		/*IO0.0-0.7*/	"PWRGD_PS_PWROK", "PWRGD_DSW_PWROK", "PWRGD_P5V_AUX", "PWRGD_P3V3_AUX", "PWRGD_P5V", "PWRGD_P3V3", "PWRGD_P1V8_PCH_AUX", "PWRGD_PCH_PVNN_AUX",
+		/*IO1.0-1.7*/	"PWRGD_P1V05_PCH_AUX", "PWRGD_PCH_AUX_VRS", "PWRGD_PVCCIN_CPU0", "PWRGD_PVCCSA_CPU0", "PWRGD_PVCCIO_CPU0", "PWRGD_PVMCP_CPU0", "PWRGD_P1V0_CPU0", "PWRGD_PVDDQ_ABC_CPU0",
+		/*IO2.0-2.7*/	"PWRGD_PVPP_ABC_CPU0", "PWRGD_PVTT_ABC_CPU0", "PWRGD_PVDDQ_DEF_CPU0", "PWRGD_PVPP_DEF_CPU0", "PWRGD_PVTT_DEF_CPU0", "", "", "",
+		/*IO3.0-3.7*/	"", "", "", "", "", "", "", "",
+		/*IO4.0-4.7*/	"", "", "", "", "", "", "", "";
+	};
+};
+
+&i2c13 {
+	/* SMB_PCIE2_STBY_LVC3 */
+	mux-expa@73 {
+		compatible = "nxp,pca9545";
+		reg = <0x73>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+	};
+	mux-sata@71 {
+		compatible = "nxp,pca9543";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+	};
+};
+
+&i2c2 {
+	/* SMB_PCIE_STBY_LVC3 */
+	mux-expb@71 {
+		compatible = "nxp,pca9545";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+	};
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
+			 &pinctrl_pwm2_default &pinctrl_pwm3_default
+			 &pinctrl_pwm4_default &pinctrl_pwm5_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00 0x06>;
+	};
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01 0x08>;
+	};
+	fan@2 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02 0x09>;
+	};
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x03 0x0A>;
+	};
+	fan@4 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04 0x0B>;
+	};
+	fan@5 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x05>;
+	};
+};
diff --git a/dts/src/arm/aspeed-bmc-vegman-rx20.dts b/dts/src/arm/aspeed-bmc-vegman-rx20.dts
new file mode 100644
index 0000000000..ebbb68b555
--- /dev/null
+++ b/dts/src/arm/aspeed-bmc-vegman-rx20.dts
@@ -0,0 +1,255 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (C) 2021 YADRO
+/dts-v1/;
+
+#include "aspeed-bmc-vegman.dtsi"
+
+/ {
+	model = "YADRO VEGMAN Rx20 BMC";
+	compatible = "yadro,vegman-rx20-bmc", "aspeed,ast2500";
+
+	leds {
+		compatible = "gpio-leds";
+
+		temp_alarm {
+			label = "temp:red:status";
+			default-state = "off";
+			gpios = <&gpio ASPEED_GPIO(E, 4) GPIO_ACTIVE_LOW>;
+		};
+
+		temp_ok {
+			label = "temp:green:status";
+			default-state = "off";
+			gpios = <&gpio ASPEED_GPIO(E, 5) GPIO_ACTIVE_LOW>;
+		};
+
+		psu_fault {
+			label = "psu:red:status";
+			default-state = "off";
+			gpios = <&gpio ASPEED_GPIO(E, 6) GPIO_ACTIVE_LOW>;
+		};
+
+		psu_ok {
+			label = "psu:green:status";
+			default-state = "off";
+			gpios = <&gpio ASPEED_GPIO(E, 7) GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names =
+	/*A0-A7*/	"CASE_OPEN_DNP","CASE_OPEN_FAULT_RST_DNP","BEZEL_ON_PWR_P3V3","PWM_PWRGD_EXP_EN","SPEAKER_BMC","FM_FORCE_BMC_UPDATE","","",
+	/*B0-B7*/	"","","","","","","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"RESET_BUTTON","RESET_OUT","POWER_BUTTON","POWER_OUT","LED_TEMP_STATUS_R","LED_TEMP_STATUS_G","LED_PWR_STATUS_R","LED_PWR_STATUS_G",
+	/*F0-F7*/	"NMI_OUT","CPU1_DISABLE_COD","","","SKT0_FAULT_LED_DNP","SKT1_FAULT_LED_DNP","RST_RGMII_PHYRST_DNP","",
+	/*G0-G7*/	"CPU_ERR2","CPU_CATERR","PCH_BMC_THERMTRIP","SPI_BMC_BOOT_HD","IRQ_NMI_EVENT","SPI_BMC_BOOT_WP","SPI_BMC_BOOT_WP1","",
+	/*H0-H7*/	"PWRGD_P3V3_RISER1","PWRGD_P3V3_RISER2","PWRGD_P3V3_RISER3","","MIO_BIOS_SEL","_SPI_FLASH_HOLD","_SPI_FLASH_WP","FM_240VA_STATUS",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"SEL_FLASH_SOFT","STATUS_SEL_BMC","","","BMC_WDT_P","ID_BUTTON","PS_PWROK","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"","","","","","","SPI_BIOS_ACTIVE_FLASH_SEL","STATUS_SEL_BIOS",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"_SPI_BMC_BOOT_CS1","","","","","","","",
+	/*S0-S7*/	"_SPI2_BMC_CS1","RSR_A_SMBEXP_RST_INT","RSR_B_SMBEXP_RST_INT","IRQ_SML0_ALERT_MUX","FP_LED_STATUS_GREEN","FP_LED_STATUS_AMBER","FP_ID_LED","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"SIO_S3","SIO_S5","","SIO_ONCONTROL","","","","",
+	/*Z0-Z7*/	"FM_BMC_PWR_BTN","SIO_POWER_GOOD","FM_BMC_PWRBTN_OUT","FM_BMC_PCH_SCI_LPC","","","","",
+	/*AA0-AA7*/	"CPU_CLK_MUX_SEL","IRQ_SML1_PMBUS_ALERT","FM_PVCCIN_CPU0_PWR_IN_ALERT","FM_PVCCIN_CPU1_PWR_IN_ALERT","BMC_SYS_PWR_FAULT","BMC_SYS_PWR_OK","SMI","POST_COMPLETE",
+	/*AB0-AB7*/	"FM_CPU_BMCINIT","NMI_BUTTON","BMC_WDT_RST1","BMC_WDT_RST2","","","","",
+	/*AC0-AC7*/	"","","","","","","","";
+};
+
+&sgpio {
+	ngpios = <80>;
+	bus-frequency = <2000000>;
+	status = "okay";
+	/* SGPIO lines. even: input, odd: output */
+	gpio-line-names =
+	/*A0-A7*/	"CPU1_PRESENCE","","CPU1_THERMTRIP","","CPU1_VRHOT","","CPU1_FIVR_FAULT","","CPU1_MEM_ABCD_VRHOT","","CPU1_MEM_EFGH_VRHOT","","","","","",
+	/*B0-B7*/	"CPU1_MISMATCH","","CPU1_MEM_THERM_EVENT","","CPU2_PRESENCE","","CPU2_THERMTRIP","","CPU2_VRHOT","","CPU2_FIVR_FAULT","","CPU2_MEM_ABCD_VRHOT","","CPU2_MEM_EFGH_VRHOT","",
+	/*C0-C7*/	"","","","","CPU2_MISMATCH","","CPU2_MEM_THERM_EVENT","","","","","","","","","",
+	/*D0-D7*/	"","","","","","","","","","","","","","","","",
+	/*E0-E7*/	"","","","","","","","","","","","","","","","",
+	/*F0-F7*/	"SGPIO_PLD_MINOR_REV_BIT0","","SGPIO_PLD_MINOR_REV_BIT1","","SGPIO_PLD_MINOR_REV_BIT2","","SGPIO_PLD_MINOR_REV_BIT3","","SGPIO_PLD_MAJOR_REV_BIT0","","SGPIO_PLD_MAJOR_REV_BIT1","","SGPIO_PLD_MAJOR_REV_BIT2","","SGPIO_PLD_MAJOR_REV_BIT3","",
+	/*G0-G7*/	"MAIN_PLD_MINOR_REV_BIT0","","MAIN_PLD_MINOR_REV_BIT1","","MAIN_PLD_MINOR_REV_BIT2","","MAIN_PLD_MINOR_REV_BIT3","","MAIN_PLD_MAJOR_REV_BIT0","","MAIN_PLD_MAJOR_REV_BIT1","","MAIN_PLD_MAJOR_REV_BIT2","","MAIN_PLD_MAJOR_REV_BIT3","",
+	/*H0-H7*/	"","","","","","","","","","","","","","","","",
+	/*I0-I7*/	"","","","","","","","","","","","","","","","",
+	/*J0-J7*/	"","","","","","","","","","","","","","","","";
+};
+
+&i2c11 {
+	/* SMB_BMC_MGMT_LVC3 */
+	gpio@21 {
+		compatible = "nxp,pcal9535";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+		/*IO0.0-0.7*/	"ETH3_CLK_REQ", "ETH2_CLK_REQ", "RSR_A_PCIE_X16_2_PRSNT", "RSR_B_PCIE_X16_2_PRSNT", "", "RSR_B_PCIE_X8_3_PRSNT", "RSR_B_PCIE_X8_4_PRSNT", "RSR_B_PCIE_X16_PRSNT_N",
+		/*IO1.0-1.7*/	"RSR_B_PCIE_X8_2_PRSNT", "RSR_B_PCIE_X8_1_PRSNT", "NIC_1_PE_BUF_PRSNT", "RSR_A_PCIE_X16_PRSNT", "RSR_A_PCIE_X8_3_PRSNT", "RSR_A_PCIE_X8_2_PRSNT", "RSR_A_PCIE_X8_1_PRSNT_N", "";
+	};
+	gpio@23 {
+		compatible = "nxp,pcal9535";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+		/*IO0.0-0.7*/	"FM_LINK_WIDTH_ID0", "FM_LINK_WIDTH_ID0", "FM_LINK_WIDTH_ID0", "FM_LINK_WIDTH_ID0", "FM_LINK_WIDTH_ID0", "", "", "",
+		/*IO1.0-1.7*/	"", "", "", "", "", "", "", "";
+	};
+	gpio@27 {
+		compatible = "nxp,pca9698";
+		reg = <0x27>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+		/*IO0.0-0.7*/	"PWRGD_PS_PWROK", "PWRGD_DSW_PWROK", "PWRGD_P5V_AUX", "PWRGD_P3V3_AUX", "PWRGD_P5V", "PWRGD_P3V3", "PWRGD_P1V8_PCH_AUX", "PWRGD_PCH_PVNN_AUX",
+		/*IO1.0-1.7*/	"PWRGD_P1V05_PCH_AUX", "PWRGD_PCH_AUX_VRS", "PWRGD_PVCCIN_CPU0", "PWRGD_PVCCSA_CPU0", "PWRGD_PVCCIO_CPU0", "PWRGD_PVMCP_CPU0", "PWRGD_P1V0_CPU0", "PWRGD_PVDDQ_ABC_CPU0",
+		/*IO2.0-2.7*/	"PWRGD_PVPP_ABC_CPU0", "PWRGD_PVTT_ABC_CPU0", "PWRGD_PVDDQ_DEF_CPU0", "PWRGD_PVPP_DEF_CPU0", "PWRGD_PVTT_DEF_CPU0", "PWRGD_PVCCIN_CPU1", "PWRGD_PVCCSA_CPU1", "PWRGD_PVCCIO_CPU1",
+		/*IO3.0-3.7*/	"PWRGD_PVMCP_CPU1", "PWRGD_P1V0_CPU1", "PWRGD_PVDDQ_GHJ_CPU1", "PWRGD_PVPP_GHJ_CPU1", "PWRGD_PVTT_GHJ_CPU1", "PWRGD_PVDDQ_KLM_CPU1", "PWRGD_PVPP_KLM_CPU1", "PWRGD_PVTT_KLM_CPU1",
+		/*IO4.0-4.7*/	"PCH_PWR_RESET_N", "FM_BOARD_SKU_ID0", "FM_BOARD_SKU_ID1", "FM_BOARD_SKU_ID2", "FM_BOARD_SKU_ID3", "FM_BOARD_SKU_ID4", "FM_BOARD_REV_ID0", "FM_BOARD_REV_ID1";
+	};
+	gpio@39 {
+		compatible = "nxp,pca9554";
+		reg = <0x39>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+		/*IO0.0-0.7*/	"FAN_FAULT_0", "FAN_FAULT_1", "FAN_FAULT_2", "FAN_FAULT_3", "FAN_FAULT_4", "FAN_FAULT_5", "FAN_FAULT_6", "";
+	};
+};
+
+&i2c13 {
+	/* SMB_PCIE2_STBY_LVC3 */
+	mux-expa@70 {
+		compatible = "nxp,pca9548";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			rsra-mux@72 {
+				compatible = "nxp,pca9548";
+				reg = <0x72>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+					at24@50 {
+						compatible = "atmel,24c64";
+						reg = <0x50>;
+						pagesize = <32>;
+						size = <8192>;
+						address-width = <16>;
+					};
+				};
+			};
+		};
+	};
+	mux-sata@71 {
+		compatible = "nxp,pca9543";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+	};
+};
+
+&i2c2 {
+	/* SMB_PCIE_STBY_LVC3 */
+	mux-expb@71 {
+		compatible = "nxp,pca9548";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			rsrb-mux@72 {
+				compatible = "nxp,pca9548";
+				reg = <0x72>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+					at24@50 {
+						compatible = "atmel,24c64";
+						reg = <0x50>;
+						pagesize = <32>;
+						size = <8192>;
+						address-width = <16>;
+					};
+				};
+			};
+			at24@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+				pagesize = <32>;
+				size = <8192>;
+				address-width = <16>;
+			};
+		};
+	};
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
+			 &pinctrl_pwm2_default &pinctrl_pwm3_default
+			 &pinctrl_pwm4_default &pinctrl_pwm5_default
+			 &pinctrl_pwm6_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00 0x07>;
+	};
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01 0x08>;
+	};
+	fan@2 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02 0x09>;
+	};
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x03 0x0A>;
+	};
+	fan@4 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04 0x0B>;
+	};
+	fan@5 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x05 0x0C>;
+	};
+	fan@6 {
+		reg = <0x06>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06 0x0D>;
+	};
+};
diff --git a/dts/src/arm/aspeed-bmc-vegman-sx20.dts b/dts/src/arm/aspeed-bmc-vegman-sx20.dts
new file mode 100644
index 0000000000..e36ee47049
--- /dev/null
+++ b/dts/src/arm/aspeed-bmc-vegman-sx20.dts
@@ -0,0 +1,154 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (C) 2021 YADRO
+/dts-v1/;
+
+#include "aspeed-bmc-vegman.dtsi"
+
+/ {
+	model = "YADRO VEGMAN Sx20 BMC";
+	compatible = "yadro,vegman-sx20-bmc", "aspeed,ast2500";
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names =
+	/*A0-A7*/	"CHASSIS_INTRUSION","CASE_OPEN_FAULT_RST","","","SPEAKER_BMC","FM_FORCE_BMC_UPDATE","","",
+	/*B0-B7*/	"","","","","","","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"RESET_BUTTON","RESET_OUT","POWER_BUTTON","POWER_OUT","","","","",
+	/*F0-F7*/	"NMI_OUT","CPU1_DISABLE_COD","","","SKT0_FAULT_LED","SKT1_FAULT_LED","RST_RGMII_PHYRST_DNP","",
+	/*G0-G7*/	"CPU_ERR2","CPU_CATERR","PCH_BMC_THERMTRIP","","IRQ_NMI_EVENT","","","",
+	/*H0-H7*/	"PWRGD_P3V3_RISER1","PWRGD_P3V3_RISER2","PWRGD_P3V3_RISER3","","MIO_BIOS_SEL","_SPI_FLASH_HOLD","_SPI_FLASH_WP","FM_240VA_STATUS",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","BMC_GPU_RISER_ID1","BMC_GPU_RISER_ID0","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","","","","","_SPI2_BMC_CS_SEL",
+	/*P0-P7*/	"","P12V_HDDS_A_EN","P12V_HDDS_B_EN","P5V_HDDS_A_EN","PWRGD_P5V_HDDS_A","P5V_HDDS_B_EN","PWRGD_P5V_HDDS_B","",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"_SPI_RMM4_LITE_CS","","","","","","","",
+	/*S0-S7*/	"_SPI2_BMC_CS1","","","IRQ_SML0_ALERT_MUX","FP_LED_STATUS_GREEN","FP_LED_STATUS_AMBER","FP_ID_LED","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"SIO_S3","SIO_S5","","SIO_ONCONTROL","","","","",
+	/*Z0-Z7*/	"FM_BMC_PWR_BTN","SIO_POWER_GOOD","FM_BMC_PWRBTN_OUT","FM_BMC_PCH_SCI_LPC","","","","",
+	/*AA0-AA7*/	"CPU_CLK_MUX_SEL","IRQ_SML1_PMBUS_ALERT","FM_PVCCIN_CPU0_PWR_IN_ALERT","FM_PVCCIN_CPU1_PWR_IN_ALERT","BMC_SYS_PWR_FAULT","BMC_SYS_PWR_OK","SMI","POST_COMPLETE",
+	/*AB0-AB7*/	"FM_CPU_BMCINIT","NMI_BUTTON","ID_BUTTON","PS_PWROK","","","","",
+	/*AC0-AC7*/	"","","","","","","","";
+};
+
+&sgpio {
+	ngpios = <80>;
+	bus-frequency = <2000000>;
+	status = "okay";
+	/* SGPIO lines. even: input, odd: output */
+	gpio-line-names =
+	/*A0-A7*/	"CPU1_PRESENCE","","CPU1_THERMTRIP","","CPU1_VRHOT","","CPU1_FIVR_FAULT","","CPU1_MEM_ABCD_VRHOT","","CPU1_MEM_EFGH_VRHOT","","","","","",
+	/*B0-B7*/	"CPU1_MISMATCH","","CPU1_MEM_THERM_EVENT","","CPU2_PRESENCE","","CPU2_THERMTRIP","","CPU2_VRHOT","","CPU2_FIVR_FAULT","","CPU2_MEM_ABCD_VRHOT","","CPU2_MEM_EFGH_VRHOT","",
+	/*C0-C7*/	"","","","","CPU2_MISMATCH","","CPU2_MEM_THERM_EVENT","","","","","","","","","",
+	/*D0-D7*/	"","","","","","","","","","","","","","","","",
+	/*E0-E7*/	"","","","","","","","","","","","","","","","",
+	/*F0-F7*/	"SGPIO_PLD_MINOR_REV_BIT0","","SGPIO_PLD_MINOR_REV_BIT1","","SGPIO_PLD_MINOR_REV_BIT2","","SGPIO_PLD_MINOR_REV_BIT3","","SGPIO_PLD_MAJOR_REV_BIT0","","SGPIO_PLD_MAJOR_REV_BIT1","","SGPIO_PLD_MAJOR_REV_BIT2","","SGPIO_PLD_MAJOR_REV_BIT3","",
+	/*G0-G7*/	"MAIN_PLD_MINOR_REV_BIT0","","MAIN_PLD_MINOR_REV_BIT1","","MAIN_PLD_MINOR_REV_BIT2","","MAIN_PLD_MINOR_REV_BIT3","","MAIN_PLD_MAJOR_REV_BIT0","","MAIN_PLD_MAJOR_REV_BIT1","","MAIN_PLD_MAJOR_REV_BIT2","","MAIN_PLD_MAJOR_REV_BIT3","",
+	/*H0-H7*/	"","","","","","","","","","","","","","","","",
+	/*I0-I7*/	"","","","","","","","","","","","","","","","",
+	/*J0-J7*/	"","","","","","","","","","","","","","","","";
+};
+
+&i2c11 {
+	/* SMB_BMC_MGMT_LVC3 */
+	gpio@21 {
+		compatible = "nxp,pcal9535";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+		/*IO0.0-0.7*/	"", "", "CPU1_PE3_0_SLOT_PRSNT", "", "CPU1_PE1_GPU_PRSNT", "CPU1_PE3_1_SLOT_PRSNT", "PE_PCH_MEZ_PRSNT", "CPU0_PE3_1_SLOT_PRSNT",
+		/*IO1.0-1.7*/	"CPU0_PE1_GPU_PRSNT", "CPU0_PE2_NVME2_PRSNT", "CPU1_PE2_NVME3_PRSNT", "CPU1_PE2_SLOT_PRSNT", "CPU1_PE2_NVME4_PRSNT", "", "CPU0_PE2_NVME1_PRSNT", "CPU0_PE3_0_RAID_PRSNT";
+	};
+	gpio@27 {
+		compatible = "nxp,pca9698";
+		reg = <0x27>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+		/*IO0.0-0.7*/	"PWRGD_PS_PWROK", "PWRGD_DSW_PWROK", "PWRGD_P5V_AUX", "PWRGD_P3V3_AUX", "PWRGD_P5V", "PWRGD_P3V3", "PWRGD_P1V8_PCH_AUX", "PWRGD_PCH_PVNN_AUX",
+		/*IO1.0-1.7*/	"PWRGD_P1V05_PCH_AUX", "PWRGD_PCH_AUX_VRS", "PWRGD_PVCCIN_CPU0", "PWRGD_PVCCSA_CPU0", "PWRGD_PVCCIO_CPU0", "PWRGD_PVMCP_CPU0", "PWRGD_P1V0_CPU0", "PWRGD_PVDDQ_ABC_CPU0",
+		/*IO2.0-2.7*/	"PWRGD_PVPP_ABC_CPU0", "PWRGD_PVTT_ABC_CPU0", "PWRGD_PVDDQ_DEF_CPU0", "PWRGD_PVPP_DEF_CPU0", "PWRGD_PVTT_DEF_CPU0", "PWRGD_PVCCIN_CPU1", "PWRGD_PVCCSA_CPU1", "PWRGD_PVCCIO_CPU1",
+		/*IO3.0-3.7*/	"PWRGD_PVMCP_CPU1", "PWRGD_P1V0_CPU1", "PWRGD_PVDDQ_GHJ_CPU1", "PWRGD_PVPP_GHJ_CPU1", "PWRGD_PVTT_GHJ_CPU1", "PWRGD_PVDDQ_KLM_CPU1", "PWRGD_PVPP_KLM_CPU1", "PWRGD_PVTT_KLM_CPU1",
+		/*IO4.0-4.7*/	"PWRGD_P5V_HDDS_A_R", "PWRGD_P5V_HDDS_B_R", "", "", "", "", "", "";
+	};
+};
+
+&i2c13 {
+	/* SMB_PCIE2_STBY_LVC3 */
+	mux-expa@73 {
+		compatible = "nxp,pca9545";
+		reg = <0x73>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+	};
+	mux-sata@71 {
+		compatible = "nxp,pca9543";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+	};
+};
+
+&i2c2 {
+	/* SMB_PCIE_STBY_LVC3 */
+	mux-expb@71 {
+		compatible = "nxp,pca9545";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+	};
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
+			 &pinctrl_pwm2_default &pinctrl_pwm3_default
+			 &pinctrl_pwm4_default &pinctrl_pwm5_default
+			 &pinctrl_pwm6_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+	};
+	fan@2 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+	};
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+	};
+	fan@4 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+	};
+	fan@5 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x05>;
+	};
+	fan@6 {
+		reg = <0x06>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06>;
+	};
+};
diff --git a/dts/src/arm/aspeed-bmc-vegman.dtsi b/dts/src/arm/aspeed-bmc-vegman.dtsi
new file mode 100644
index 0000000000..1a5b25b2ea
--- /dev/null
+++ b/dts/src/arm/aspeed-bmc-vegman.dtsi
@@ -0,0 +1,311 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (C) 2021 YADRO
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	aliases {
+		serial4 = &uart5;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlyprintk";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		video_engine_memory: jpegbuffer {
+			size = <0x02000000>;	/* 32M */
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+
+		ramoops@9eff0000{
+			compatible = "ramoops";
+			reg = <0x9eff0000 0x10000>;
+			record-size = <0x2000>;
+			console-size = <0x2000>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+			<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+			<&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
+			<&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		identify {
+			label = "platform:blue:indicator";
+			linux,default-trigger = "heartbeat";
+			gpios = <&gpio ASPEED_GPIO(S, 6) GPIO_ACTIVE_LOW>;
+		};
+
+		status_amber {
+			label = "platform:red:status";
+			default-state = "off";
+			gpios = <&gpio ASPEED_GPIO(S, 5) GPIO_ACTIVE_LOW>;
+		};
+
+		status_green {
+			label = "platform:green:status";
+			default-state = "off";
+			gpios = <&gpio ASPEED_GPIO(S, 4) GPIO_ACTIVE_LOW>;
+		};
+
+		power_fault {
+			label = "platform:red:power";
+			default-state = "off";
+			gpios = <&gpio ASPEED_GPIO(AA, 4) GPIO_ACTIVE_LOW>;
+		};
+
+		power_ok {
+			label = "platform:green:power";
+			default-state = "off";
+			gpios = <&gpio ASPEED_GPIO(AA, 5) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	beeper {
+		compatible = "pwm-beeper";
+		pwms = <&timer 5 1000000 0>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		label = "bmc";
+		m25p,fast-read;
+#include "openbmc-flash-layout-64.dtsi"
+	};
+};
+
+&spi2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi2ck_default
+			&pinctrl_spi2miso_default
+			&pinctrl_spi2mosi_default
+			&pinctrl_spi2cs0_default>;
+	flash@0 {
+		status = "okay";
+		label = "bios";
+		m25p,fast-read;
+	};
+};
+
+&mac0 {
+	status = "okay";
+	use-ncsi;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+};
+
+&mac1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+
+	phy-mode = "rgmii";
+	phy-handle = <&phy>;
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy: ethernet-phy@1 {
+			/* KSZ9131 */
+			compatible = "ethernet-phy-id0022.1640";
+			reg = <1>;
+
+			micrel,led-mode = <0>;
+		};
+	};
+};
+
+&vhub {
+	status = "okay";
+};
+
+&adc {
+	status = "okay";
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+&sdmmc {
+	status = "okay";
+};
+
+&sdhci1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sd2_default>;
+	disable-wp;
+};
+
+&timer {
+	fttmr010,pwm-outputs = <5>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_timer5_default>;
+	#pwm-cells = <3>;
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+			&pinctrl_rxd1_default
+			&pinctrl_nrts1_default
+			&pinctrl_ndtr1_default
+			&pinctrl_ndsr1_default
+			&pinctrl_ncts1_default
+			&pinctrl_ndcd1_default
+			&pinctrl_nri1_default>;
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+};
+
+&kcs3 {
+	aspeed,lpc-io-reg = <0xCA2>;
+	status = "okay";
+};
+
+&kcs4 {
+	aspeed,lpc-io-reg = <0xCA4>;
+	status = "okay";
+};
+
+&lpc_snoop {
+	snoop-ports = <0x80>;
+	status = "okay";
+};
+
+&uart_routing {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <>;
+};
+
+&uart3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <>;
+};
+
+&uart4 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <>;
+};
+
+&i2c0 {
+	/* SMB_IPMB_STBY_LVC3 */
+	multi-master;
+	status = "okay";
+};
+
+&i2c1 {
+	/* SMB_CHASSENSOR_STBY_LVC3 */
+	status = "okay";
+};
+
+&i2c2 {
+	/* SMB_PCIE_STBY_LVC3 */
+	status = "okay";
+};
+
+&i2c3 {
+	/* SMB_HOST_STBY_LVC3 */
+	multi-master;
+	status = "okay";
+};
+
+&i2c4 {
+	/* BMC_PMBUS2_STBY */
+	status = "okay";
+};
+
+&i2c5 {
+	/* SMB_SMLINK0_STBY_LVC3 */
+	bus-frequency = <1000000>;
+	multi-master;
+	status = "okay";
+};
+
+&i2c6 {
+	/* SMB_TEMPSENSOR_STBY_LVC3 */
+	multi-master;
+	status = "okay";
+};
+
+&i2c7 {
+	/* SMB_SM_PMB1_SML1_STBY_LVC3 */
+	multi-master;
+	status = "okay";
+};
+
+&i2c9 {
+	/* SMB_BMC_ETH3_LVC3 */
+	status = "okay";
+};
+
+&i2c10 {
+	/* SMB_BMC_ETH2_LVC3 */
+	status = "okay";
+};
+
+&i2c11 {
+	/* SMB_BMC_MGMT_LVC3 */
+	status = "okay";
+
+	at24@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+		size = <8192>;
+		address-width = <16>;
+	};
+};
+
+&i2c12 {
+	/* SMB_BMC_FAULT_EXP_LVC3 */
+	status = "okay";
+};
+
+&i2c13 {
+	/* SMB_PCIE2_STBY_LVC3 */
+	status = "okay";
+};
diff --git a/dts/src/arm/aspeed-g4.dtsi b/dts/src/arm/aspeed-g4.dtsi
index b313a1cf5f..f14dace34c 100644
--- a/dts/src/arm/aspeed-g4.dtsi
+++ b/dts/src/arm/aspeed-g4.dtsi
@@ -381,6 +381,7 @@
 					compatible = "aspeed,ast2400-ibt-bmc";
 					reg = <0x140 0x18>;
 					interrupts = <8>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
 					status = "disabled";
 				};
 
diff --git a/dts/src/arm/aspeed-g5.dtsi b/dts/src/arm/aspeed-g5.dtsi
index c7049454c7..7495f93c50 100644
--- a/dts/src/arm/aspeed-g5.dtsi
+++ b/dts/src/arm/aspeed-g5.dtsi
@@ -446,6 +446,7 @@
 					compatible = "aspeed,ast2500-kcs-bmc-v2";
 					reg = <0x24 0x1>, <0x30 0x1>, <0x3c 0x1>;
 					interrupts = <8>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
 					status = "disabled";
 				};
 
@@ -453,6 +454,7 @@
 					compatible = "aspeed,ast2500-kcs-bmc-v2";
 					reg = <0x28 0x1>, <0x34 0x1>, <0x40 0x1>;
 					interrupts = <8>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
 					status = "disabled";
 				};
 
@@ -460,6 +462,7 @@
 					compatible = "aspeed,ast2500-kcs-bmc-v2";
 					reg = <0x2c 0x1>, <0x38 0x1>, <0x44 0x1>;
 					interrupts = <8>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
 					status = "disabled";
 				};
 
@@ -467,6 +470,7 @@
 					compatible = "aspeed,ast2500-kcs-bmc-v2";
 					reg = <0x114 0x1>, <0x118 0x1>, <0x11c 0x1>;
 					interrupts = <8>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
 					status = "disabled";
 				};
 
@@ -507,6 +511,7 @@
 					compatible = "aspeed,ast2500-ibt-bmc";
 					reg = <0x140 0x18>;
 					interrupts = <8>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
 					status = "disabled";
 				};
 			};
diff --git a/dts/src/arm/aspeed-g6.dtsi b/dts/src/arm/aspeed-g6.dtsi
index 5106a424f1..c32e87fad4 100644
--- a/dts/src/arm/aspeed-g6.dtsi
+++ b/dts/src/arm/aspeed-g6.dtsi
@@ -384,6 +384,11 @@
 				status = "disabled";
 			};
 
+			sbc: secure-boot-controller@1e6f2000 {
+				compatible = "aspeed,ast2600-sbc";
+				reg = <0x1e6f2000 0x1000>;
+			};
+
 			gpio0: gpio@1e780000 {
 				#gpio-cells = <2>;
 				gpio-controller;
@@ -520,6 +525,7 @@
 					compatible = "aspeed,ast2500-kcs-bmc-v2";
 					reg = <0x24 0x1>, <0x30 0x1>, <0x3c 0x1>;
 					interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
 					kcs_chan = <1>;
 					status = "disabled";
 				};
@@ -528,6 +534,7 @@
 					compatible = "aspeed,ast2500-kcs-bmc-v2";
 					reg = <0x28 0x1>, <0x34 0x1>, <0x40 0x1>;
 					interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
 					status = "disabled";
 				};
 
@@ -535,6 +542,7 @@
 					compatible = "aspeed,ast2500-kcs-bmc-v2";
 					reg = <0x2c 0x1>, <0x38 0x1>, <0x44 0x1>;
 					interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
 					status = "disabled";
 				};
 
@@ -542,6 +550,7 @@
 					compatible = "aspeed,ast2500-kcs-bmc-v2";
 					reg = <0x114 0x1>, <0x118 0x1>, <0x11c 0x1>;
 					interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
 					status = "disabled";
 				};
 
@@ -581,6 +590,7 @@
 					compatible = "aspeed,ast2600-ibt-bmc";
 					reg = <0x140 0x18>;
 					interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
 					status = "disabled";
 				};
 			};
diff --git a/dts/src/arm/at91-q5xr5.dts b/dts/src/arm/at91-q5xr5.dts
index 5827383b18..47a00062f0 100644
--- a/dts/src/arm/at91-q5xr5.dts
+++ b/dts/src/arm/at91-q5xr5.dts
@@ -147,12 +147,6 @@
 			reg = <0x8000 0x3E000>;
 		};
 	};
-
-	spidev@1 {
-		compatible = "spidev";
-		spi-max-frequency = <2000000>;
-		reg = <1>;
-	};
 };
 
 &spi1 {
@@ -160,18 +154,6 @@
 	pinctrl-0 = <&pinctrl_spi1 &pinctrl_spi1_npcs0 &pinctrl_spi1_npcs1>;
 	cs-gpios = <&pioB 3 GPIO_ACTIVE_HIGH>, <&pioC 5 GPIO_ACTIVE_LOW>, <0>, <0>;
 	status = "okay";
-
-	spidev@0 {
-		compatible = "spidev";
-		spi-max-frequency = <2000000>;
-		reg = <0>;
-	};
-
-	spidev@1 {
-		compatible = "spidev";
-		spi-max-frequency = <2000000>;
-		reg = <1>;
-	};
 };
 
 &usart0 {
diff --git a/dts/src/arm/at91-sama5d2_xplained.dts b/dts/src/arm/at91-sama5d2_xplained.dts
index b1e854f658..9bf2ec0ba3 100644
--- a/dts/src/arm/at91-sama5d2_xplained.dts
+++ b/dts/src/arm/at91-sama5d2_xplained.dts
@@ -66,7 +66,7 @@
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_sdmmc0_default>;
 			non-removable;
-			mmc-ddr-1_8v;
+			mmc-ddr-3_3v;
 			status = "okay";
 		};
 
@@ -619,10 +619,9 @@
 						bias-disable;
 					};
 
-					ck_cd_rstn_vddsel {
+					ck_cd_rstn {
 						pinmux = <PIN_PA0__SDMMC0_CK>,
 							 <PIN_PA10__SDMMC0_RSTN>,
-							 <PIN_PA11__SDMMC0_VDDSEL>,
 							 <PIN_PA13__SDMMC0_CD>;
 						bias-disable;
 					};
diff --git a/dts/src/arm/at91-sama5d3_ksz9477_evb.dts b/dts/src/arm/at91-sama5d3_ksz9477_evb.dts
new file mode 100644
index 0000000000..443e8b0228
--- /dev/null
+++ b/dts/src/arm/at91-sama5d3_ksz9477_evb.dts
@@ -0,0 +1,209 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2021 Oleksij Rempel <kernel@pengutronix.de>, Pengutronix
+ */
+/dts-v1/;
+#include "sama5d36.dtsi"
+
+/ {
+	model = "EVB-KSZ9477";
+	compatible = "microchip,sama5d3-ksz9477-evb", "atmel,sama5d36",
+		     "atmel,sama5d3", "atmel,sama5";
+
+	chosen {
+		stdout-path = &dbgu;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_vcc_mmc0: regulator-mmc0 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_mcc0_vcc>;
+		regulator-name = "mmc0-vcc";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		gpio = <&pioE 2 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&dbgu {
+	status = "okay";
+};
+
+&ebi {
+	pinctrl-0 = <&pinctrl_ebi_nand_addr>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-0 = <&pinctrl_i2c0_pu>;
+	status = "okay";
+};
+
+&macb0 {
+	phy-mode = "rgmii";
+	status = "okay";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&main_xtal {
+	clock-frequency = <12000000>;
+};
+
+&mmc0 {
+	pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3
+		     &pinctrl_mmc0_dat4_7 &pinctrl_mmc0_cd>;
+	status = "okay";
+
+	slot@0 {
+		reg = <0>;
+		bus-width = <8>;
+		cd-gpios = <&pioE 0 GPIO_ACTIVE_LOW>;
+		disable-wp;
+		vmmc-supply = <&reg_vcc_mmc0>;
+		vqmmc-supply = <&reg_3v3>;
+	};
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand@3 {
+		reg = <0x3 0x0 0x2>;
+		atmel,rb = <0>;
+		nand-bus-width = <8>;
+		nand-ecc-mode = "hw";
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+		nand-on-flash-bbt;
+		label = "atmel_nand";
+	};
+};
+
+&slow_xtal {
+	clock-frequency = <32768>;
+};
+
+&spi0 {
+	cs-gpios = <&pioD 13 GPIO_ACTIVE_LOW>, <0>, <0>,
+		   <&pioD 16 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&spi1 {
+	pinctrl-0 = <&pinctrl_spi_ksz>;
+	cs-gpios = <&pioC 25 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	switch@0 {
+		compatible = "microchip,ksz9477";
+		reg = <0>;
+		spi-max-frequency = <1000000>;
+		spi-cpha;
+		spi-cpol;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				label = "lan1";
+			};
+
+			port@1 {
+				reg = <1>;
+				label = "lan2";
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "lan3";
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "lan4";
+			};
+
+			port@4 {
+				reg = <4>;
+				label = "lan5";
+			};
+
+			port@5 {
+				reg = <5>;
+				label = "cpu";
+				ethernet = <&macb0>;
+				phy-mode = "rgmii-txid";
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+	};
+};
+
+&usb0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usba_vbus>;
+	atmel,vbus-gpio = <&pioE 9 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&pinctrl {
+	board {
+		pinctrl_i2c0_pu: i2c0-pu {
+			atmel,pins =
+				<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+				<AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+		};
+
+		pinctrl_mmc0_cd: mmc0-cd {
+			atmel,pins = <AT91_PIOE 0 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_mcc0_vcc: mmc0-vcc {
+			atmel,pins = <AT91_PIOE 2 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_spi_ksz: spi-ksz {
+			atmel,pins =
+				<
+				/* SPI1_MISO */
+				AT91_PIOC 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+				/* SPI1_MOSI */
+				AT91_PIOC 23 AT91_PERIPH_A AT91_PINCTRL_NONE
+				/* SPI1_SPCK */
+				AT91_PIOC 24 AT91_PERIPH_A AT91_PINCTRL_NONE
+
+				/* SPI CS */
+				AT91_PIOC 25 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+				/* switch IRQ */
+				AT91_PIOB 28 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH
+				/* switch PME_N, SoC IN */
+				AT91_PIOC 30 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP
+				/* switch RST */
+				AT91_PIOC 31 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH
+				>;
+		};
+
+		pinctrl_usba_vbus: usba-vbus {
+			atmel,pins =
+				<AT91_PIOE 9 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
+		};
+	};
+};
diff --git a/dts/src/arm/at91-sama7g5ek.dts b/dts/src/arm/at91-sama7g5ek.dts
index 0e1975c681..ccf9e224da 100644
--- a/dts/src/arm/at91-sama7g5ek.dts
+++ b/dts/src/arm/at91-sama7g5ek.dts
@@ -13,6 +13,7 @@
 #include "sama7g5.dtsi"
 #include <dt-bindings/mfd/atmel-flexcom.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/at91.h>
 
 / {
 	model = "Microchip SAMA7G5-EK";
@@ -134,6 +135,59 @@
 	cpu-supply = <&vddcpu>;
 };
 
+&qspi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_qspi>;
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <133000000>;
+		spi-tx-bus-width = <8>;
+		spi-rx-bus-width = <8>;
+		m25p,fast-read;
+
+		at91bootstrap@0 {
+			label = "ospi: at91bootstrap";
+			reg = <0x0 0x40000>;
+		};
+
+		bootloader@40000 {
+			label = "ospi: bootloader";
+			reg = <0x40000 0xc0000>;
+		};
+
+		bootloaderenvred@100000 {
+			label = "ospi: bootloader env redundant";
+			reg = <0x100000 0x40000>;
+		};
+
+		bootloaderenv@140000 {
+			label = "ospi: bootloader env";
+			reg = <0x140000 0x40000>;
+		};
+
+		dtb@180000 {
+			label = "ospi: device tree";
+			reg = <0x180000 0x80000>;
+		};
+
+		kernel@200000 {
+			label = "ospi: kernel";
+			reg = <0x200000 0x600000>;
+		};
+
+		rootfs@800000 {
+			label = "ospi: rootfs";
+			reg = <0x800000 0x7800000>;
+		};
+
+	};
+};
+
 &dma0 {
 	status = "okay";
 };
@@ -555,6 +609,25 @@
 		bias-disable;
 	};
 
+	pinctrl_qspi: qspi {
+		pinmux = <PIN_PB12__QSPI0_IO0>,
+			 <PIN_PB11__QSPI0_IO1>,
+			 <PIN_PB10__QSPI0_IO2>,
+			 <PIN_PB9__QSPI0_IO3>,
+			 <PIN_PB16__QSPI0_IO4>,
+			 <PIN_PB17__QSPI0_IO5>,
+			 <PIN_PB18__QSPI0_IO6>,
+			 <PIN_PB19__QSPI0_IO7>,
+			 <PIN_PB13__QSPI0_CS>,
+			 <PIN_PB14__QSPI0_SCK>,
+			 <PIN_PB15__QSPI0_SCKN>,
+			 <PIN_PB20__QSPI0_DQS>,
+			 <PIN_PB21__QSPI0_INT>;
+		bias-disable;
+		slew-rate = <0>;
+		atmel,drive-strength = <ATMEL_PIO_DRVSTR_HI>;
+	};
+
 	pinctrl_sdmmc0_default: sdmmc0_default {
 		cmd_data {
 			pinmux = <PIN_PA1__SDMMC0_CMD>,
diff --git a/dts/src/arm/at91-wb50n.dts b/dts/src/arm/at91-wb50n.dts
index a5e45bb95c..89f0f717f7 100644
--- a/dts/src/arm/at91-wb50n.dts
+++ b/dts/src/arm/at91-wb50n.dts
@@ -90,12 +90,6 @@
 
 &spi1 {
 	status = "okay";
-
-	spidev@0 {
-		compatible = "spidev";
-		reg = <0>;
-		spi-max-frequency = <8000000>;
-	};
 };
 
 &usb0 {
diff --git a/dts/src/arm/bcm-cygnus.dtsi b/dts/src/arm/bcm-cygnus.dtsi
index 8ecb7861ce..ad65be8719 100644
--- a/dts/src/arm/bcm-cygnus.dtsi
+++ b/dts/src/arm/bcm-cygnus.dtsi
@@ -112,18 +112,18 @@
 			status = "disabled";
 		};
 
-		pcie_phy: phy@301d0a0 {
+		pcie_phy: pcie_phy@301d0a0 {
 			compatible = "brcm,cygnus-pcie-phy";
 			reg = <0x0301d0a0 0x14>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			pcie0_phy: phy@0 {
+			pcie0_phy: pcie-phy@0 {
 				reg = <0>;
 				#phy-cells = <0>;
 			};
 
-			pcie1_phy: phy@1 {
+			pcie1_phy: pcie-phy@1 {
 				reg = <1>;
 				#phy-cells = <0>;
 			};
@@ -274,8 +274,8 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 			device_type = "pci";
-			ranges = <0x81000000 0 0	  0x28000000 0 0x00010000
-				  0x82000000 0 0x20000000 0x20000000 0 0x04000000>;
+			ranges = <0x81000000 0 0	  0x28000000 0 0x00010000>,
+				 <0x82000000 0 0x20000000 0x20000000 0 0x04000000>;
 
 			phys = <&pcie0_phy>;
 			phy-names = "pcie-phy";
@@ -283,7 +283,7 @@
 			status = "disabled";
 
 			msi-parent = <&msi0>;
-			msi0: msi-controller {
+			msi0: msi {
 				compatible = "brcm,iproc-msi";
 				msi-controller;
 				interrupt-parent = <&gic>;
@@ -309,8 +309,8 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 			device_type = "pci";
-			ranges = <0x81000000 0 0	  0x48000000 0 0x00010000
-				  0x82000000 0 0x40000000 0x40000000 0 0x04000000>;
+			ranges = <0x81000000 0 0	  0x48000000 0 0x00010000>,
+				 <0x82000000 0 0x40000000 0x40000000 0 0x04000000>;
 
 			phys = <&pcie1_phy>;
 			phy-names = "pcie-phy";
@@ -318,7 +318,7 @@
 			status = "disabled";
 
 			msi-parent = <&msi1>;
-			msi1: msi-controller {
+			msi1: msi {
 				compatible = "brcm,iproc-msi";
 				msi-controller;
 				interrupt-parent = <&gic>;
diff --git a/dts/src/arm/bcm-hr2.dtsi b/dts/src/arm/bcm-hr2.dtsi
index 84cda16f68..33e6ba63a1 100644
--- a/dts/src/arm/bcm-hr2.dtsi
+++ b/dts/src/arm/bcm-hr2.dtsi
@@ -318,7 +318,7 @@
 		status = "disabled";
 
 		msi-parent = <&msi0>;
-		msi0: msi-controller {
+		msi0: msi {
 			compatible = "brcm,iproc-msi";
 			msi-controller;
 			interrupt-parent = <&gic>;
@@ -354,7 +354,7 @@
 		status = "disabled";
 
 		msi-parent = <&msi1>;
-		msi1: msi-controller {
+		msi1: msi {
 			compatible = "brcm,iproc-msi";
 			msi-controller;
 			interrupt-parent = <&gic>;
diff --git a/dts/src/arm/bcm-nsp.dtsi b/dts/src/arm/bcm-nsp.dtsi
index 1c08daa188..5b1dc58d40 100644
--- a/dts/src/arm/bcm-nsp.dtsi
+++ b/dts/src/arm/bcm-nsp.dtsi
@@ -534,7 +534,7 @@
 			};
 		};
 
-		sata: ahci@41000 {
+		sata: sata@41000 {
 			compatible = "brcm,bcm-nsp-ahci";
 			reg-names = "ahci", "top-ctrl";
 			reg = <0x41000 0x1000>, <0x40020 0x1c>;
@@ -587,7 +587,7 @@
 		status = "disabled";
 
 		msi-parent = <&msi0>;
-		msi0: msi-controller {
+		msi0: msi {
 			compatible = "brcm,iproc-msi";
 			msi-controller;
 			interrupt-parent = <&gic>;
@@ -624,7 +624,7 @@
 		status = "disabled";
 
 		msi-parent = <&msi1>;
-		msi1: msi-controller {
+		msi1: msi {
 			compatible = "brcm,iproc-msi";
 			msi-controller;
 			interrupt-parent = <&gic>;
@@ -661,7 +661,7 @@
 		status = "disabled";
 
 		msi-parent = <&msi2>;
-		msi2: msi-controller {
+		msi2: msi {
 			compatible = "brcm,iproc-msi";
 			msi-controller;
 			interrupt-parent = <&gic>;
diff --git a/dts/src/arm/bcm2711-rpi-4-b.dts b/dts/src/arm/bcm2711-rpi-4-b.dts
index 631dd5baf6..4432412044 100644
--- a/dts/src/arm/bcm2711-rpi-4-b.dts
+++ b/dts/src/arm/bcm2711-rpi-4-b.dts
@@ -65,12 +65,12 @@
 };
 
 &expgpio {
-	gpio-line-names = "BT_ON",
+	gpio-line-names = "BT_ON",		/*  0 */
 			  "WL_ON",
 			  "PWR_LED_OFF",
 			  "GLOBAL_RESET",
 			  "VDD_SD_IO_SEL",
-			  "CAM_GPIO",
+			  "CAM_GPIO",		/*  5 */
 			  "SD_PWR_ON",
 			  "";
 };
@@ -84,66 +84,66 @@
 	 * "FOO" = GPIO line named "FOO" on the schematic
 	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
 	 */
-	gpio-line-names = "ID_SDA",
+	gpio-line-names = "ID_SDA",		/*  0 */
 			  "ID_SCL",
 			  "SDA1",
 			  "SCL1",
 			  "GPIO_GCLK",
-			  "GPIO5",
+			  "GPIO5",		/*  5 */
 			  "GPIO6",
 			  "SPI_CE1_N",
 			  "SPI_CE0_N",
 			  "SPI_MISO",
-			  "SPI_MOSI",
+			  "SPI_MOSI",		/* 10 */
 			  "SPI_SCLK",
 			  "GPIO12",
 			  "GPIO13",
 			  /* Serial port */
 			  "TXD1",
-			  "RXD1",
+			  "RXD1",		/* 15 */
 			  "GPIO16",
 			  "GPIO17",
 			  "GPIO18",
 			  "GPIO19",
-			  "GPIO20",
+			  "GPIO20",		/* 20 */
 			  "GPIO21",
 			  "GPIO22",
 			  "GPIO23",
 			  "GPIO24",
-			  "GPIO25",
+			  "GPIO25",		/* 25 */
 			  "GPIO26",
 			  "GPIO27",
 			  "RGMII_MDIO",
 			  "RGMIO_MDC",
 			  /* Used by BT module */
-			  "CTS0",
+			  "CTS0",		/* 30 */
 			  "RTS0",
 			  "TXD0",
 			  "RXD0",
 			  /* Used by Wifi */
 			  "SD1_CLK",
-			  "SD1_CMD",
+			  "SD1_CMD",		/* 35 */
 			  "SD1_DATA0",
 			  "SD1_DATA1",
 			  "SD1_DATA2",
 			  "SD1_DATA3",
 			  /* Shared with SPI flash */
-			  "PWM0_MISO",
+			  "PWM0_MISO",		/* 40 */
 			  "PWM1_MOSI",
 			  "STATUS_LED_G_CLK",
 			  "SPIFLASH_CE_N",
 			  "SDA0",
-			  "SCL0",
+			  "SCL0",		/* 45 */
 			  "RGMII_RXCLK",
 			  "RGMII_RXCTL",
 			  "RGMII_RXD0",
 			  "RGMII_RXD1",
-			  "RGMII_RXD2",
+			  "RGMII_RXD2",		/* 50 */
 			  "RGMII_RXD3",
 			  "RGMII_TXCLK",
 			  "RGMII_TXCTL",
 			  "RGMII_TXD0",
-			  "RGMII_TXD1",
+			  "RGMII_TXD1",		/* 55 */
 			  "RGMII_TXD2",
 			  "RGMII_TXD3";
 };
diff --git a/dts/src/arm/bcm47094-asus-rt-ac88u.dts b/dts/src/arm/bcm47094-asus-rt-ac88u.dts
index 448060561c..249476fdad 100644
--- a/dts/src/arm/bcm47094-asus-rt-ac88u.dts
+++ b/dts/src/arm/bcm47094-asus-rt-ac88u.dts
@@ -68,8 +68,6 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
 		wps {
 			label = "WPS";
@@ -138,6 +136,7 @@
 			fixed-link {
 				speed = <1000>;
 				full-duplex;
+				pause;
 			};
 		};
 
diff --git a/dts/src/arm/bcm53016-meraki-mr32.dts b/dts/src/arm/bcm53016-meraki-mr32.dts
index 64f973e1ef..66c64a6ec4 100644
--- a/dts/src/arm/bcm53016-meraki-mr32.dts
+++ b/dts/src/arm/bcm53016-meraki-mr32.dts
@@ -84,40 +84,6 @@
 			max-brightness = <255>;
 		};
 	};
-
-	i2c {
-		/*
-		 * The platform provided I2C does not budge.
-		 * This is a replacement until I can figure
-		 * out what are the missing bits...
-		 */
-
-		compatible = "i2c-gpio";
-		sda-gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
-		scl-gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
-		i2c-gpio,delay-us = <10>; /* close to 100 kHz */
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		current_sense: ina219@45 {
-			compatible = "ti,ina219";
-			reg = <0x45>;
-			shunt-resistor = <60000>; /* = 60 mOhms */
-		};
-
-		eeprom: eeprom@50 {
-			compatible = "atmel,24c64";
-			reg = <0x50>;
-			pagesize = <32>;
-			read-only;
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			mac_address: mac-address@66 {
-				reg = <0x66 0x6>;
-			};
-		};
-	};
 };
 
 &uart0 {
@@ -228,3 +194,31 @@
 		};
 	};
 };
+
+&i2c0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinmux_i2c>;
+
+	clock-frequency = <100000>;
+
+	current_sense: ina219@45 {
+		compatible = "ti,ina219";
+		reg = <0x45>;
+		shunt-resistor = <60000>; /* = 60 mOhms */
+	};
+
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+		read-only;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		mac_address: mac-address@66 {
+			reg = <0x66 0x6>;
+		};
+	};
+};
diff --git a/dts/src/arm/bcm5301x.dtsi b/dts/src/arm/bcm5301x.dtsi
index f69d2af3c1..603c700c70 100644
--- a/dts/src/arm/bcm5301x.dtsi
+++ b/dts/src/arm/bcm5301x.dtsi
@@ -148,15 +148,6 @@
 		};
 	};
 
-	usb2_phy: usb2-phy@1800c000 {
-		compatible = "brcm,ns-usb2-phy";
-		reg = <0x1800c000 0x1000>;
-		reg-names = "dmu";
-		#phy-cells = <0>;
-		clocks = <&genpll BCM_NSP_GENPLL_USB_PHY_REF_CLK>;
-		clock-names = "phy-ref-clk";
-	};
-
 	axi@18000000 {
 		compatible = "brcm,bus-axi";
 		reg = <0x18000000 0x1000>;
@@ -423,14 +414,14 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 
-		cru@100 {
-			compatible = "simple-bus";
+		cru-bus@100 {
+			compatible = "brcm,ns-cru", "simple-mfd";
 			reg = <0x100 0x1a4>;
 			ranges;
 			#address-cells = <1>;
 			#size-cells = <1>;
 
-			lcpll0: lcpll0@100 {
+			lcpll0: clock-controller@100 {
 				#clock-cells = <1>;
 				compatible = "brcm,nsp-lcpll0";
 				reg = <0x100 0x14>;
@@ -439,7 +430,7 @@
 						     "sdio", "ddr_phy";
 			};
 
-			genpll: genpll@140 {
+			genpll: clock-controller@140 {
 				#clock-cells = <1>;
 				compatible = "brcm,nsp-genpll";
 				reg = <0x140 0x24>;
@@ -450,6 +441,20 @@
 						     "sata1", "sata2";
 			};
 
+			usb2_phy: phy@164 {
+				compatible = "brcm,ns-usb2-phy";
+				reg = <0x164 0x4>;
+				brcm,syscon-clkset = <&cru_clkset>;
+				clocks = <&genpll BCM_NSP_GENPLL_USB_PHY_REF_CLK>;
+				clock-names = "phy-ref-clk";
+				#phy-cells = <0>;
+			};
+
+			cru_clkset: syscon@180 {
+				compatible = "brcm,cru-clkset", "syscon";
+				reg = <0x180 0x4>;
+			};
+
 			pinctrl: pin-controller@1c0 {
 				compatible = "brcm,bcm4708-pinmux";
 				reg = <0x1c0 0x24>;
diff --git a/dts/src/arm/bcm958625-meraki-alamo.dtsi b/dts/src/arm/bcm958625-meraki-alamo.dtsi
index 102acd85fa..ba01054a76 100644
--- a/dts/src/arm/bcm958625-meraki-alamo.dtsi
+++ b/dts/src/arm/bcm958625-meraki-alamo.dtsi
@@ -118,6 +118,8 @@
 						reg = <0>;
 						ethernet = <&sgmii1>;
 						phy-mode = "sgmii";
+						qca,sgmii-enable-pll;
+						qca,sgmii-txclk-falling-edge;
 						fixed-link {
 							speed = <1000>;
 							full-duplex;
@@ -194,6 +196,8 @@
 						reg = <0>;
 						ethernet = <&sgmii0>;
 						phy-mode = "sgmii";
+						qca,sgmii-enable-pll;
+						qca,sgmii-txclk-falling-edge;
 						fixed-link {
 							speed = <1000>;
 							full-duplex;
diff --git a/dts/src/arm/elpida_ecb240abacn.dtsi b/dts/src/arm/elpida_ecb240abacn.dtsi
index d87ee4794f..9698801cbc 100644
--- a/dts/src/arm/elpida_ecb240abacn.dtsi
+++ b/dts/src/arm/elpida_ecb240abacn.dtsi
@@ -5,7 +5,7 @@
 
 / {
 	elpida_ECB240ABACN: lpddr2 {
-		compatible	= "Elpida,ECB240ABACN","jedec,lpddr2-s4";
+		compatible	= "elpida,ECB240ABACN","jedec,lpddr2-s4";
 		density		= <2048>;
 		io-width	= <32>;
 
diff --git a/dts/src/arm/exynos4210-i9100.dts b/dts/src/arm/exynos4210-i9100.dts
index 19bb7dc98b..33894054b8 100644
--- a/dts/src/arm/exynos4210-i9100.dts
+++ b/dts/src/arm/exynos4210-i9100.dts
@@ -828,9 +828,12 @@
 		compatible = "brcm,bcm4330-bt";
 
 		shutdown-gpios = <&gpl0 4 GPIO_ACTIVE_HIGH>;
-		reset-gpios = <&gpl1 0 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpl1 0 GPIO_ACTIVE_LOW>;
 		device-wakeup-gpios = <&gpx3 1 GPIO_ACTIVE_HIGH>;
-		host-wakeup-gpios = <&gpx2 6 GPIO_ACTIVE_HIGH>;
+
+		interrupt-parent = <&gpx2>;
+		interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-names = "host-wakeup";
 	};
 };
 
diff --git a/dts/src/arm/exynos5260.dtsi b/dts/src/arm/exynos5260.dtsi
index 52fa211525..524d244050 100644
--- a/dts/src/arm/exynos5260.dtsi
+++ b/dts/src/arm/exynos5260.dtsi
@@ -368,7 +368,7 @@
 			status = "disabled";
 		};
 
-		hsi2c_0: hsi2c@12da0000 {
+		hsi2c_0: i2c@12da0000 {
 			compatible = "samsung,exynos5260-hsi2c";
 			reg = <0x12DA0000 0x1000>;
 			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
@@ -381,7 +381,7 @@
 			status = "disabled";
 		};
 
-		hsi2c_1: hsi2c@12db0000 {
+		hsi2c_1: i2c@12db0000 {
 			compatible = "samsung,exynos5260-hsi2c";
 			reg = <0x12DB0000 0x1000>;
 			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
@@ -394,7 +394,7 @@
 			status = "disabled";
 		};
 
-		hsi2c_2: hsi2c@12dc0000 {
+		hsi2c_2: i2c@12dc0000 {
 			compatible = "samsung,exynos5260-hsi2c";
 			reg = <0x12DC0000 0x1000>;
 			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
@@ -407,7 +407,7 @@
 			status = "disabled";
 		};
 
-		hsi2c_3: hsi2c@12dd0000 {
+		hsi2c_3: i2c@12dd0000 {
 			compatible = "samsung,exynos5260-hsi2c";
 			reg = <0x12DD0000 0x1000>;
 			interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/dts/src/arm/gemini-nas4220b.dts b/dts/src/arm/gemini-nas4220b.dts
index 13112a8a5d..6544c73034 100644
--- a/dts/src/arm/gemini-nas4220b.dts
+++ b/dts/src/arm/gemini-nas4220b.dts
@@ -84,7 +84,7 @@
 			partitions {
 				compatible = "redboot-fis";
 				/* Eraseblock at 0xfe0000 */
-				fis-index-block = <0x1fc>;
+				fis-index-block = <0x7f>;
 			};
 		};
 
diff --git a/dts/src/arm/imx1-pinfunc.h b/dts/src/arm/imx1-pinfunc.h
index 050a1fc46a..bd2e679cb2 100644
--- a/dts/src/arm/imx1-pinfunc.h
+++ b/dts/src/arm/imx1-pinfunc.h
@@ -26,9 +26,9 @@
  *                2 - 0
  *                3 - 1
  *
- * 'pin' is an integer between 0 and 0xbf. i.MX1 has 4 ports with 32 configurable
- * configurable pins each. 'pin' is PORT * 32 + PORT_PIN, PORT_PIN is the pin
- * number on the specific port (between 0 and 31).
+ * 'pin' is an integer between 0 and 0xbf. i.MX1 has 4 ports with 32
+ * configurable pins each. 'pin' is PORT * 32 + PORT_PIN, PORT_PIN is
+ * the pin number on the specific port (between 0 and 31).
  */
 
 #define MX1_PAD_A24__A24			0x00 0x004
diff --git a/dts/src/arm/imx1.dtsi b/dts/src/arm/imx1.dtsi
index 9b94098786..e312f1e74e 100644
--- a/dts/src/arm/imx1.dtsi
+++ b/dts/src/arm/imx1.dtsi
@@ -55,7 +55,7 @@
 
 	clocks {
 		clk32 {
-			compatible = "fsl,imx-clk32", "fixed-clock";
+			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <32000>;
 		};
diff --git a/dts/src/arm/imx25.dtsi b/dts/src/arm/imx25.dtsi
index fdcca82c99..fa8044c21c 100644
--- a/dts/src/arm/imx25.dtsi
+++ b/dts/src/arm/imx25.dtsi
@@ -62,7 +62,7 @@
 
 	clocks {
 		osc {
-			compatible = "fsl,imx-osc", "fixed-clock";
+			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <24000000>;
 		};
@@ -200,7 +200,7 @@
 			};
 		};
 
-		spba@50000000 {
+		spba-bus@50000000 {
 			compatible = "fsl,spba-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
diff --git a/dts/src/arm/imx27-pinfunc.h b/dts/src/arm/imx27-pinfunc.h
index 1514d80a31..75aea0c701 100644
--- a/dts/src/arm/imx27-pinfunc.h
+++ b/dts/src/arm/imx27-pinfunc.h
@@ -26,9 +26,9 @@
  *                2 - 0
  *                3 - 1
  *
- * 'pin' is an integer between 0 and 0xbf. imx27 has 6 ports with 32 configurable
- * configurable pins each. 'pin' is PORT * 32 + PORT_PIN, PORT_PIN is the pin
- * number on the specific port (between 0 and 31).
+ * 'pin' is an integer between 0 and 0xbf. imx27 has 6 ports with 32
+ * configurable pins each. 'pin' is PORT * 32 + PORT_PIN, PORT_PIN is
+ * the pin number on the specific port (between 0 and 31).
  */
 
 #define MX27_PAD_USBH2_CLK__USBH2_CLK                      0x00 0x000
diff --git a/dts/src/arm/imx28-tx28.dts b/dts/src/arm/imx28-tx28.dts
index 164254c28f..9e5651c7ea 100644
--- a/dts/src/arm/imx28-tx28.dts
+++ b/dts/src/arm/imx28-tx28.dts
@@ -239,24 +239,6 @@
 		>;
 		/* enable this and disable ssp3 below, if you need full duplex SPI transfer */
 		status = "disabled";
-
-		spi@0 {
-			compatible = "spidev";
-			reg = <0>;
-			spi-max-frequency = <57600000>;
-		};
-
-		spi@1 {
-			compatible = "spidev";
-			reg = <1>;
-			spi-max-frequency = <57600000>;
-		};
-
-		spi@2 {
-			compatible = "spidev";
-			reg = <2>;
-			spi-max-frequency = <57600000>;
-		};
 	};
 };
 
@@ -700,24 +682,6 @@
 	pinctrl-0 = <&spi3_pins_a>;
 	clock-frequency = <57600000>;
 	status = "okay";
-
-	spi@0 {
-		compatible = "spidev";
-		reg = <0>;
-		spi-max-frequency = <57600000>;
-	};
-
-	spi@1 {
-		compatible = "spidev";
-		reg = <1>;
-		spi-max-frequency = <57600000>;
-	};
-
-	spi@2 {
-		compatible = "spidev";
-		reg = <2>;
-		spi-max-frequency = <57600000>;
-	};
 };
 
 &usb0 {
diff --git a/dts/src/arm/imx31.dtsi b/dts/src/arm/imx31.dtsi
index 948d2a543f..2adb923c0b 100644
--- a/dts/src/arm/imx31.dtsi
+++ b/dts/src/arm/imx31.dtsi
@@ -166,7 +166,7 @@
 			};
 		};
 
-		spba@50000000 {
+		spba-bus@50000000 {
 			compatible = "fsl,spba-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
diff --git a/dts/src/arm/imx50.dtsi b/dts/src/arm/imx50.dtsi
index a969f335b2..be0de0fd31 100644
--- a/dts/src/arm/imx50.dtsi
+++ b/dts/src/arm/imx50.dtsi
@@ -62,25 +62,25 @@
 
 	clocks {
 		ckil {
-			compatible = "fsl,imx-ckil", "fixed-clock";
+			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <32768>;
 		};
 
 		ckih1 {
-			compatible = "fsl,imx-ckih1", "fixed-clock";
+			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <22579200>;
 		};
 
 		ckih2 {
-			compatible = "fsl,imx-ckih2", "fixed-clock";
+			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <0>;
 		};
 
 		osc {
-			compatible = "fsl,imx-osc", "fixed-clock";
+			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <24000000>;
 		};
@@ -108,7 +108,7 @@
 			reg = <0x50000000 0x10000000>;
 			ranges;
 
-			spba@50000000 {
+			spba-bus@50000000 {
 				compatible = "fsl,spba-bus", "simple-bus";
 				#address-cells = <1>;
 				#size-cells = <1>;
diff --git a/dts/src/arm/imx51.dtsi b/dts/src/arm/imx51.dtsi
index 01cfcbe592..56c8d87864 100644
--- a/dts/src/arm/imx51.dtsi
+++ b/dts/src/arm/imx51.dtsi
@@ -48,25 +48,25 @@
 
 	clocks {
 		ckil {
-			compatible = "fsl,imx-ckil", "fixed-clock";
+			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <32768>;
 		};
 
 		ckih1 {
-			compatible = "fsl,imx-ckih1", "fixed-clock";
+			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <0>;
 		};
 
 		ckih2 {
-			compatible = "fsl,imx-ckih2", "fixed-clock";
+			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <0>;
 		};
 
 		osc {
-			compatible = "fsl,imx-osc", "fixed-clock";
+			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <24000000>;
 		};
@@ -178,7 +178,7 @@
 			reg = <0x70000000 0x10000000>;
 			ranges;
 
-			spba@70000000 {
+			spba-bus@70000000 {
 				compatible = "fsl,spba-bus", "simple-bus";
 				#address-cells = <1>;
 				#size-cells = <1>;
diff --git a/dts/src/arm/imx53-tx53.dtsi b/dts/src/arm/imx53-tx53.dtsi
index 7c9730f3f8..81c2726a32 100644
--- a/dts/src/arm/imx53-tx53.dtsi
+++ b/dts/src/arm/imx53-tx53.dtsi
@@ -192,17 +192,6 @@
 		&gpio3 19 GPIO_ACTIVE_HIGH
 	>;
 
-	spidev0: spi@0 {
-		compatible = "spidev";
-		reg = <0>;
-		spi-max-frequency = <54000000>;
-	};
-
-	spidev1: spi@1 {
-		compatible = "spidev";
-		reg = <1>;
-		spi-max-frequency = <54000000>;
-	};
 };
 
 &esdhc1 {
diff --git a/dts/src/arm/imx53.dtsi b/dts/src/arm/imx53.dtsi
index 2cf3909cca..67487f3cae 100644
--- a/dts/src/arm/imx53.dtsi
+++ b/dts/src/arm/imx53.dtsi
@@ -86,25 +86,25 @@
 
 	clocks {
 		ckil {
-			compatible = "fsl,imx-ckil", "fixed-clock";
+			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <32768>;
 		};
 
 		ckih1 {
-			compatible = "fsl,imx-ckih1", "fixed-clock";
+			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <22579200>;
 		};
 
 		ckih2 {
-			compatible = "fsl,imx-ckih2", "fixed-clock";
+			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <0>;
 		};
 
 		osc {
-			compatible = "fsl,imx-osc", "fixed-clock";
+			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <24000000>;
 		};
@@ -229,7 +229,7 @@
 			reg = <0x50000000 0x10000000>;
 			ranges;
 
-			spba@50000000 {
+			spba-bus@50000000 {
 				compatible = "fsl,spba-bus", "simple-bus";
 				#address-cells = <1>;
 				#size-cells = <1>;
diff --git a/dts/src/arm/imx6dl-mba6.dtsi b/dts/src/arm/imx6dl-mba6.dtsi
new file mode 100644
index 0000000000..b749b424bb
--- /dev/null
+++ b/dts/src/arm/imx6dl-mba6.dtsi
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2013 Sascha Hauer, Pengutronix
+ *
+ * Copyright 2013-2021 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+&ethphy {
+	rxdv-skew-ps = <180>;
+	txen-skew-ps = <0>;
+	rxd3-skew-ps = <180>;
+	rxd2-skew-ps = <180>;
+	rxd1-skew-ps = <180>;
+	rxd0-skew-ps = <180>;
+	txd3-skew-ps = <120>;
+	txd2-skew-ps = <0>;
+	txd1-skew-ps = <300>;
+	txd0-skew-ps = <120>;
+	txc-skew-ps = <1860>;
+	rxc-skew-ps = <1860>;
+};
diff --git a/dts/src/arm/imx6dl-mba6a.dts b/dts/src/arm/imx6dl-mba6a.dts
new file mode 100644
index 0000000000..df0a96b28a
--- /dev/null
+++ b/dts/src/arm/imx6dl-mba6a.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2013 Sascha Hauer, Pengutronix
+ *
+ * Copyright 2013-2021 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "imx6dl-tqma6a.dtsi"
+#include "imx6qdl-mba6.dtsi"
+#include "imx6qdl-mba6a.dtsi"
+#include "imx6dl-mba6.dtsi"
+
+/ {
+	model = "TQ TQMa6S/DL on MBa6x";
+	compatible = "tq,imx6dl-mba6x-a", "tq,mba6a",
+		     "tq,imx6dl-tqma6dl-a", "fsl,imx6dl";
+};
diff --git a/dts/src/arm/imx6dl-mba6b.dts b/dts/src/arm/imx6dl-mba6b.dts
new file mode 100644
index 0000000000..610b19d2db
--- /dev/null
+++ b/dts/src/arm/imx6dl-mba6b.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2013 Sascha Hauer, Pengutronix
+ *
+ * Copyright 2013-2021 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "imx6dl-tqma6b.dtsi"
+#include "imx6qdl-mba6.dtsi"
+#include "imx6qdl-mba6b.dtsi"
+#include "imx6dl-mba6.dtsi"
+
+/ {
+	model = "TQ TQMa6S/DL on MBa6x";
+	compatible = "tq,imx6dl-mba6x-b", "tq,mba6b",
+		     "tq,imx6dl-tqma6dl-b", "fsl,imx6dl";
+};
diff --git a/dts/src/arm/imx6dl-phytec-mira-rdk-nand.dts b/dts/src/arm/imx6dl-phytec-mira-rdk-nand.dts
index 9f7f9f9813..d906a7f05a 100644
--- a/dts/src/arm/imx6dl-phytec-mira-rdk-nand.dts
+++ b/dts/src/arm/imx6dl-phytec-mira-rdk-nand.dts
@@ -8,6 +8,9 @@
 #include "imx6dl.dtsi"
 #include "imx6qdl-phytec-phycore-som.dtsi"
 #include "imx6qdl-phytec-mira.dtsi"
+#include "imx6qdl-phytec-mira-peb-eval-01.dtsi"
+#include "imx6qdl-phytec-mira-peb-av-02.dtsi"
+#include "imx6qdl-phytec-mira-peb-wlbt-05.dtsi"
 
 / {
 	model = "PHYTEC phyBOARD-Mira DualLite/Solo Carrier-Board with NAND";
diff --git a/dts/src/arm/imx6q-mba6.dtsi b/dts/src/arm/imx6q-mba6.dtsi
new file mode 100644
index 0000000000..0d7be45672
--- /dev/null
+++ b/dts/src/arm/imx6q-mba6.dtsi
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2013 Sascha Hauer, Pengutronix
+ *
+ * Copyright 2013-2021 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+&ecspi5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi5_mba6x>;
+	cs-gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
+};
+
+&ethphy {
+	rxdv-skew-ps = <180>;
+	txen-skew-ps = <120>;
+	rxd3-skew-ps = <180>;
+	rxd2-skew-ps = <180>;
+	rxd1-skew-ps = <180>;
+	rxd0-skew-ps = <180>;
+	txd3-skew-ps = <120>;
+	txd2-skew-ps = <0>;
+	txd1-skew-ps = <180>;
+	txd0-skew-ps = <360>;
+	txc-skew-ps = <1860>;
+	rxc-skew-ps = <1860>;
+};
+
+&sata {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_ecspi5_mba6x: ecspi5grp-mba6x {
+		fsl,pins = <
+			/* HYS, SPEED = MED, 100k up, DSE = 011, SRE_FAST */
+			MX6QDL_PAD_SD1_DAT0__ECSPI5_MISO 0x1b099
+			MX6QDL_PAD_SD1_CMD__ECSPI5_MOSI 0xb099
+			MX6QDL_PAD_SD1_CLK__ECSPI5_SCLK 0xb099
+			MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0xb099 /* eCSPI5 SS0 */
+		>;
+	};
+};
diff --git a/dts/src/arm/imx6q-mba6a.dts b/dts/src/arm/imx6q-mba6a.dts
new file mode 100644
index 0000000000..349a08605a
--- /dev/null
+++ b/dts/src/arm/imx6q-mba6a.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2013 Sascha Hauer, Pengutronix
+ *
+ * Copyright 2013-2021 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+/dts-v1/;
+
+#include "imx6q-tqma6a.dtsi"
+#include "imx6qdl-mba6.dtsi"
+#include "imx6qdl-mba6a.dtsi"
+#include "imx6q-mba6.dtsi"
+
+/ {
+	model = "TQ TQMa6Q on MBa6x";
+	compatible = "tq,imx6q-mba6x-a", "tq,mba6a",
+		     "tq,imx6q-tqma6q-a", "fsl,imx6q";
+};
diff --git a/dts/src/arm/imx6q-mba6b.dts b/dts/src/arm/imx6q-mba6b.dts
new file mode 100644
index 0000000000..02c9f3e91b
--- /dev/null
+++ b/dts/src/arm/imx6q-mba6b.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2013 Sascha Hauer, Pengutronix
+ *
+ * Copyright 2013-2021 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+/dts-v1/;
+
+#include "imx6q-tqma6b.dtsi"
+#include "imx6qdl-mba6.dtsi"
+#include "imx6qdl-mba6b.dtsi"
+#include "imx6q-mba6.dtsi"
+
+/ {
+	model = "TQ TQMa6Q on MBa6x";
+	compatible = "tq,imx6q-mba6x-b", "tq,mba6b",
+		     "tq,imx6q-tqma6q-b", "fsl,imx6q";
+};
diff --git a/dts/src/arm/imx6q-phytec-mira-rdk-emmc.dts b/dts/src/arm/imx6q-phytec-mira-rdk-emmc.dts
index 2e70ea5623..322f071d97 100644
--- a/dts/src/arm/imx6q-phytec-mira-rdk-emmc.dts
+++ b/dts/src/arm/imx6q-phytec-mira-rdk-emmc.dts
@@ -8,6 +8,9 @@
 #include "imx6q.dtsi"
 #include "imx6qdl-phytec-phycore-som.dtsi"
 #include "imx6qdl-phytec-mira.dtsi"
+#include "imx6qdl-phytec-mira-peb-eval-01.dtsi"
+#include "imx6qdl-phytec-mira-peb-av-02.dtsi"
+#include "imx6qdl-phytec-mira-peb-wlbt-05.dtsi"
 
 / {
 	model = "PHYTEC phyBOARD-Mira Quad Carrier-Board with eMMC";
diff --git a/dts/src/arm/imx6q-phytec-mira-rdk-nand.dts b/dts/src/arm/imx6q-phytec-mira-rdk-nand.dts
index 65d2e483c1..3f13726c80 100644
--- a/dts/src/arm/imx6q-phytec-mira-rdk-nand.dts
+++ b/dts/src/arm/imx6q-phytec-mira-rdk-nand.dts
@@ -8,6 +8,9 @@
 #include "imx6q.dtsi"
 #include "imx6qdl-phytec-phycore-som.dtsi"
 #include "imx6qdl-phytec-mira.dtsi"
+#include "imx6qdl-phytec-mira-peb-eval-01.dtsi"
+#include "imx6qdl-phytec-mira-peb-av-02.dtsi"
+#include "imx6qdl-phytec-mira-peb-wlbt-05.dtsi"
 
 / {
 	model = "PHYTEC phyBOARD-Mira Quad Carrier-Board with NAND";
diff --git a/dts/src/arm/imx6q-yapp4-crux.dts b/dts/src/arm/imx6q-yapp4-crux.dts
new file mode 100644
index 0000000000..15f4824a51
--- /dev/null
+++ b/dts/src/arm/imx6q-yapp4-crux.dts
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2021 Y Soft Corporation, a.s.
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6dl-yapp4-common.dtsi"
+
+/ {
+	model = "Y Soft IOTA Crux i.MX6Quad board";
+	compatible = "ysoft,imx6q-yapp4-crux", "fsl,imx6q";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0xf0000000>;
+	};
+};
+
+&gpio_oled {
+	status = "okay";
+};
+
+&leds {
+	status = "okay";
+};
+
+&oled_1305 {
+	status = "okay";
+};
+
+&oled_1309 {
+	status = "okay";
+};
+
+&reg_usb_h1_vbus {
+	status = "okay";
+};
+
+&touchkeys {
+	status = "okay";
+};
+
+&uart2 {
+	status = "disabled";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbphy2 {
+	status = "okay";
+};
diff --git a/dts/src/arm/imx6qdl-dhcom-drc02.dtsi b/dts/src/arm/imx6qdl-dhcom-drc02.dtsi
index 3d0a50a9ab..702cd4a1b2 100644
--- a/dts/src/arm/imx6qdl-dhcom-drc02.dtsi
+++ b/dts/src/arm/imx6qdl-dhcom-drc02.dtsi
@@ -95,6 +95,10 @@
 	rts-gpios = <&gpio7 13 GPIO_ACTIVE_HIGH>; /* GPIO P */
 };
 
+&usbh1 {
+	disable-over-current;
+};
+
 &usdhc2 { /* SD card */
 	status = "okay";
 };
diff --git a/dts/src/arm/imx6qdl-dhcom-pdk2.dtsi b/dts/src/arm/imx6qdl-dhcom-pdk2.dtsi
index dc21853706..dc89b554e6 100644
--- a/dts/src/arm/imx6qdl-dhcom-pdk2.dtsi
+++ b/dts/src/arm/imx6qdl-dhcom-pdk2.dtsi
@@ -260,6 +260,10 @@
 	status = "okay";
 };
 
+&usbh1 {
+	disable-over-current;
+};
+
 &usdhc2 { /* SD card */
 	status = "okay";
 };
diff --git a/dts/src/arm/imx6qdl-dhcom-som.dtsi b/dts/src/arm/imx6qdl-dhcom-som.dtsi
index 5d10c40313..5befbe13d1 100644
--- a/dts/src/arm/imx6qdl-dhcom-som.dtsi
+++ b/dts/src/arm/imx6qdl-dhcom-som.dtsi
@@ -132,14 +132,15 @@
 		#size-cells = <0>;
 
 		ethphy0: ethernet-phy@0 { /* SMSC LAN8710Ai */
-			compatible = "ethernet-phy-ieee802.3-c22";
+			compatible = "ethernet-phy-id0007.c0f0",
+				     "ethernet-phy-ieee802.3-c22";
 			interrupt-parent = <&gpio4>;
 			interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
 			pinctrl-0 = <&pinctrl_ethphy0>;
 			pinctrl-names = "default";
 			reg = <0>;
-			reset-assert-us = <1000>;
-			reset-deassert-us = <1000>;
+			reset-assert-us = <500>;
+			reset-deassert-us = <500>;
 			reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
 			smsc,disable-energy-detect; /* Make plugin detection reliable */
 		};
@@ -728,6 +729,7 @@
 	pinctrl_usbh1: usbh1-grp {
 		fsl,pins = <
 			MX6QDL_PAD_EIM_D31__GPIO3_IO31		0x120b0
+			MX6QDL_PAD_EIM_D30__USB_H1_OC		0x1b0b1
 		>;
 	};
 
diff --git a/dts/src/arm/imx6qdl-mba6.dtsi b/dts/src/arm/imx6qdl-mba6.dtsi
new file mode 100644
index 0000000000..daf76345b1
--- /dev/null
+++ b/dts/src/arm/imx6qdl-mba6.dtsi
@@ -0,0 +1,526 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2013 Sascha Hauer, Pengutronix
+ *
+ * Copyright 2013-2021 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+#include <dt-bindings/clock/imx6qdl-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/sound/fsl-imx-audmux.h>
+
+/ {
+	aliases {
+		mmc0 = &usdhc3;
+		mmc1 = &usdhc2;
+		/delete-property/ mmc2;
+		/delete-property/ mmc3;
+	};
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	beeper: gpio-beeper {
+		compatible = "gpio-beeper";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpiobeeper>;
+		gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
+	};
+
+	gpio_buttons: gpio-buttons {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpiobuttons>;
+
+		button1 {
+			label = "s6";
+			linux,code = <KEY_F6>;
+			gpios = <&gpio7 13 GPIO_ACTIVE_LOW>;
+		};
+
+		button2 {
+			label = "s7";
+			linux,code = <KEY_F7>;
+			gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
+		};
+
+		button3 {
+			label = "s8";
+			linux,code = <KEY_F8>;
+			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpioled>;
+
+		led1 {
+			label = "led1";
+			gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		led2 {
+			label = "led2";
+			gpios = <&gpio6 31 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	reg_mba6_3p3v: regulator-mba6-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "supply-mba6-3p3v";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_pcie: regulator-pcie {
+		compatible = "regulator-fixed";
+		regulator-name = "supply-pcie";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		/* PCIE.PWR_EN */
+		gpio = <&gpio2 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+		vin-supply = <&reg_mba6_3p3v>;
+	};
+
+	reg_vcc3v3_audio: regulator-vcc3v3-audio {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3-audio";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&reg_mba6_3p3v>;
+	};
+
+	sound {
+		compatible = "fsl,imx-audio-tlv320aic32x4";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_audmux>;
+		model = "imx-audio-tlv320aic32x4";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&tlv320aic32x4>;
+		audio-asrc = <&asrc>;
+		audio-routing =
+			"IN3_L", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"IN1_L", "Line In Jack",
+			"IN1_R", "Line In Jack",
+			"Line Out Jack", "LOL",
+			"Line Out Jack", "LOR";
+		mux-int-port = <1>;
+		mux-ext-port = <3>;
+	};
+};
+
+&audmux {
+	status = "okay";
+
+	ssi0 {
+		fsl,audmux-port = <MX31_AUDMUX_PORT1_SSI0>;
+		fsl,port-config = <
+			(IMX_AUDMUX_V2_PTCR_SYN |
+				IMX_AUDMUX_V2_PTCR_TFSDIR |
+				IMX_AUDMUX_V2_PTCR_TFSEL(MX31_AUDMUX_PORT3_SSI_PINS_3) |
+				IMX_AUDMUX_V2_PTCR_TCLKDIR |
+				IMX_AUDMUX_V2_PTCR_TCSEL(MX31_AUDMUX_PORT3_SSI_PINS_3))
+			IMX_AUDMUX_V2_PDCR_RXDSEL(MX31_AUDMUX_PORT3_SSI_PINS_3)
+		>;
+	};
+
+	aud3 {
+		fsl,audmux-port = <MX31_AUDMUX_PORT3_SSI_PINS_3>;
+		fsl,port-config = <
+			IMX_AUDMUX_V2_PTCR_SYN
+			IMX_AUDMUX_V2_PDCR_RXDSEL(MX31_AUDMUX_PORT1_SSI0)
+		>;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can2>;
+	status = "okay";
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>, <&pinctrl_ecspi1_mba6>;
+	cs-gpios = <&gpio3 19 0>, <&gpio3 24 0>;
+};
+
+&fec {
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy>;
+	mac-address = [00 00 00 00 00 00];
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy@3 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <3>;
+			interrupt-parent = <&gpio1>;
+			interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
+			reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <1000>;
+			reset-deassert-us = <100000>;
+			micrel,force-master;
+			max-speed = <1000>;
+		};
+	};
+};
+
+&i2c1 {
+	tlv320aic32x4: audio-codec@18 {
+		compatible = "ti,tlv320aic32x4";
+		reg = <0x18>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		clock-names = "mclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_codec>;
+		ldoin-supply = <&reg_vcc3v3_audio>;
+		iov-supply = <&reg_mba6_3p3v>;
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio6 7 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&snvs_poweroff {
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	uart-has-rtscts;
+	linux,rs485-enabled-at-boot-time;
+	rs485-rts-active-low;
+	rs485-rx-during-tx;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbh1 {
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	power-active-high;
+	over-current-active-low;
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	dr_mode = "otg";
+	status = "okay";
+};
+
+/* SD card slot */
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	vmmc-supply = <&reg_mba6_3p3v>;
+	bus-width = <4>;
+	no-1-8-v;
+	no-mmc;
+	no-sdio;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog1>;
+	/* does not work on unmodified starter kit */
+	/* fsl,ext-reset-output; */
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD  0x1b0b0
+			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC  0x1b0b0
+			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD  0x1b0b0
+			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x1b0b0
+		>;
+	};
+
+	pinctrl_can1: can1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0xb099
+			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0xb099
+		>;
+	};
+
+	pinctrl_can2: can2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0xb099
+			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0xb099
+		>;
+	};
+
+	pinctrl_codec: codecgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1 0xb0 /* CLK */
+		>;
+	};
+
+	pinctrl_ecspi1_mba6: ecspimba6grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__GPIO3_IO24 0xb099 /* eCSPI1 SS2 */
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			/* FEC phy IRQ */
+			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28     0x00011008
+			/* FEC phy reset */
+			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25   0x1b099
+			/* DSE = 100, 100k up, SPEED = MED */
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO       0xb0a0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC         0xb0a0
+			/* DSE = 111, pull 100k up */
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC       0xb038
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0       0xb038
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1       0xb038
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2       0xb038
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3       0xb038
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0xb038
+			/* DSE = 111, pull external */
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC       0x0038
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0       0x0038
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1       0x0038
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2       0x0038
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3       0x0038
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x0038
+			/* HYS = 1, DSE = 111, 100k up, SPEED = HIGH */
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK  0x1b0f0
+		>;
+	};
+
+	pinctrl_gpiobeeper: gpiobeepergrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT3__GPIO1_IO21 0xb099
+		>;
+	};
+
+	pinctrl_gpiobuttons: gpiobuttongrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x0001b099
+			MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x0001b099
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0001b099
+		>;
+	};
+
+	pinctrl_gpioled: gpioledgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0xb099 /* LED V15 */
+			MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0xb099 /* LED V16 */
+		>;
+	};
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			/* LCD.CONTRAST -> Rev 0100 only, not used on Rev.0200*/
+			MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x0001b099
+
+			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x0001b099
+			MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x0001b099
+			MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x0001b099
+
+			MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x0001b099
+			MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x0001b099
+			MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x0001b099
+			MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x0001b099
+			MX6QDL_PAD_EIM_CS0__GPIO2_IO23 0x0001b099
+			MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x0001b099
+			MX6QDL_PAD_EIM_OE__GPIO2_IO25 0x0001b099
+
+			MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x0001b099
+			MX6QDL_PAD_EIM_D26__GPIO3_IO26 0x0001b099
+			MX6QDL_PAD_EIM_D27__GPIO3_IO27 0x0001b099
+			MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x0001b099
+			MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x0001b099
+
+			MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x0001b099
+			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x0001b099
+			MX6QDL_PAD_KEY_COL1__GPIO4_IO08 0x0001b099
+			MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x0001b099
+
+			MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x0001b099
+			MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x0001b099
+			MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x0001b099
+
+			MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x0001b099
+			MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x0001b099
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			/* HYS = 1, DSE = 110, 100k up, SPEED = HIGH (11)*/
+			MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x001b0f0 /* #PCIE.WAKE */
+			MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x001b0f0 /* #PCIE.RST */
+			MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x001b0f0 /* #PCIE.DIS */
+			/* HYS = 1, DSE = 110, PUE+PKE, SPEED = HIGH (11)*/
+			MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x00130f0 /* PCIE.PWR_EN */
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			/* 100 k PD, DSE 120 OHM, SPPEED LO */
+			MX6QDL_PAD_GPIO_9__PWM1_OUT 0x00003050
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			/* 100 k PD, DSE 120 OHM, SPPEED LO */
+			MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x00003050
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			/* 100 k PD, DSE 120 OHM, SPPEED LO */
+			MX6QDL_PAD_SD4_DAT2__PWM4_OUT 0x00003050
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b099
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b099
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CLK__UART3_RX_DATA 0x1b0b1
+			MX6QDL_PAD_SD4_CMD__UART3_TX_DATA 0x1b0b1
+			MX6QDL_PAD_EIM_D30__UART3_CTS_B   0x1b0b1
+			MX6QDL_PAD_EIM_D31__UART3_RTS_B   0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT18__UART5_RTS_B 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT19__UART5_CTS_B 0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			/* CLK: 47k Pup SPD_LOW DSE 40Ohm SRE_FAST HYS */
+			MX6QDL_PAD_SD2_CLK__SD2_CLK    0x00017071
+			/* SD2: 47k Pup SPD_LOW DSE 80Ohm SRE_FAST HYS */
+			MX6QDL_PAD_SD2_CMD__SD2_CMD    0x00017059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x00017059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x00017059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x00017059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x00017059
+
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04  0x0001b099 /* usdhc2 CD */
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02  0x0001b099 /* usdhc2 WP */
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__USB_OTG_OC  0x0001b0b0
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID   0x00017059
+			MX6QDL_PAD_EIM_D22__USB_OTG_PWR 0x0001b099
+		>;
+	};
+
+	pinctrl_wdog1: wdog1grp {
+		fsl,pins = <
+			 /* Watchdog out */
+			MX6QDL_PAD_SD1_DAT2__WDOG1_B 0x0000b099
+		>;
+	};
+};
diff --git a/dts/src/arm/imx6qdl-mba6a.dtsi b/dts/src/arm/imx6qdl-mba6a.dtsi
new file mode 100644
index 0000000000..a61f2705a3
--- /dev/null
+++ b/dts/src/arm/imx6qdl-mba6a.dtsi
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2013 Sascha Hauer, Pengutronix
+ *
+ * Copyright 2013-2021 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+/ {
+	aliases {
+		rtc0 = &rtc0;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>, <&pinctrl_enet_fix>;
+};
+
+&i2c1 {
+	lm75: temperature-sensor@49 {
+		compatible = "national,lm75";
+		reg = <0x49>;
+	};
+
+	m24c64_57: eeprom@57 {
+		compatible = "atmel,24c64";
+		reg = <0x57>;
+		pagesize = <32>;
+	};
+
+	rtc0: rtc@68 {
+		compatible = "dallas,ds1339";
+		reg = <0x68>;
+	};
+};
diff --git a/dts/src/arm/imx6qdl-mba6b.dtsi b/dts/src/arm/imx6qdl-mba6b.dtsi
new file mode 100644
index 0000000000..9f9f7037c9
--- /dev/null
+++ b/dts/src/arm/imx6qdl-mba6b.dtsi
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2013 Sascha Hauer, Pengutronix
+ *
+ * Copyright 2013-2021 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+/ {
+	aliases {
+		rtc0 = &rtc0;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+};
+
+&i2c3 {
+	lm75: temperature-sensor@49 {
+		compatible = "national,lm75";
+		reg = <0x49>;
+	};
+
+	m24c64_57: eeprom@57 {
+		compatible = "atmel,24c64";
+		reg = <0x57>;
+		pagesize = <32>;
+	};
+
+	rtc0: rtc@68 {
+		compatible = "dallas,ds1339";
+		reg = <0x68>;
+	};
+};
+
+&iomuxc {
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b899
+			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b899
+		>;
+	};
+};
diff --git a/dts/src/arm/imx6qdl-phytec-mira-peb-av-02.dtsi b/dts/src/arm/imx6qdl-phytec-mira-peb-av-02.dtsi
new file mode 100644
index 0000000000..393475cb0f
--- /dev/null
+++ b/dts/src/arm/imx6qdl-phytec-mira-peb-av-02.dtsi
@@ -0,0 +1,119 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2018 PHYTEC Messtechnik
+ * Author: Christian Hemp <c.hemp@phytec.de>
+ */
+
+/ {
+	display: display0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,imx-parallel-display";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_disp0>;
+		interface-pix-fmt = "rgb24";
+		status = "disabled";
+
+		port@0 {
+			reg = <0>;
+
+			display0_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			display0_out: endpoint {
+				remote-endpoint = <&peb_panel_lcd_in>;
+			};
+		};
+	};
+
+	panel-lcd {
+		compatible = "edt,etm0700g0edh6";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_disp0_pwr>;
+		power-supply = <&reg_display>;
+		enable-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		backlight = <&backlight>;
+		status = "disabled";
+
+		port {
+			peb_panel_lcd_in: endpoint {
+				remote-endpoint = <&display0_out>;
+			};
+		};
+	};
+
+	reg_display: regulator-peb-display {
+		compatible = "regulator-fixed";
+		regulator-name = "peb-display";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&i2c1 {
+	edt_ft5x06: touchscreen@38 {
+		compatible = "edt,edt-ft5406";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_edt_ft5x06>;
+		reg = <0x38>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <2 IRQ_TYPE_NONE>;
+		status = "disabled";
+        };
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&display0_in>;
+};
+
+&iomuxc {
+	pinctrl_disp0: disp0grp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK	0x10
+			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02		0x10
+			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03		0x10
+			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15		0x1b080
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00	0x10
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01	0x10
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02	0x10
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03	0x10
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04	0x10
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05	0x10
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06	0x10
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07	0x10
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08	0x10
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09	0x10
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10	0x10
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11	0x10
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12	0x10
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13	0x10
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14	0x10
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15	0x10
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16	0x10
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17	0x10
+			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18	0x10
+			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19	0x10
+			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20	0x10
+			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21	0x10
+			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22	0x10
+			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23	0x10
+		>;
+	};
+
+	pinctrl_disp0_pwr: disp0pwrgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22			0x1b0b0
+		>;
+	};
+
+	pinctrl_edt_ft5x06: edtft5x06grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_DA2__GPIO3_IO02			0xb0b1
+		>;
+	};
+};
diff --git a/dts/src/arm/imx6qdl-phytec-mira-peb-eval-01.dtsi b/dts/src/arm/imx6qdl-phytec-mira-peb-eval-01.dtsi
new file mode 100644
index 0000000000..037b601975
--- /dev/null
+++ b/dts/src/arm/imx6qdl-phytec-mira-peb-eval-01.dtsi
@@ -0,0 +1,71 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2018 PHYTEC Messtechnik
+ * Author: Christian Hemp <c.hemp@phytec.de>
+ */
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+		status = "disabled";
+
+		power {
+			label = "Power Button";
+			gpios = <&gpio5 28 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WAKEUP>;
+			wakeup-source;
+		};
+
+		sleep {
+			label = "Sleep Button";
+			gpios = <&gpio6 18 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_SLEEP>;
+		};
+	};
+
+	user_leds: user-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_user_leds>;
+		status = "disabled";
+
+		user-led1 {
+			gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "gpio";
+			default-state = "on";
+		};
+
+		user-led2 {
+			gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "gpio";
+			default-state = "on";
+		};
+
+		user-led3 {
+			gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "gpio";
+			default-state = "on";
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl_gpio_keys: gpiokeysgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT6__GPIO6_IO18		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT10__GPIO5_IO28	0x1b0b0
+		>;
+	};
+
+	pinctrl_user_leds: userledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT4__GPIO7_IO01		0x1b0b0
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT11__GPIO5_IO29	0x1b0b0
+		>;
+	};
+};
diff --git a/dts/src/arm/imx6qdl-phytec-mira-peb-wlbt-05.dtsi b/dts/src/arm/imx6qdl-phytec-mira-peb-wlbt-05.dtsi
new file mode 100644
index 0000000000..84f884d6e5
--- /dev/null
+++ b/dts/src/arm/imx6qdl-phytec-mira-peb-wlbt-05.dtsi
@@ -0,0 +1,85 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2021 PHYTEC Messtechnik GmbH
+ * Author: Yunus Bas <y.bas@phytec.de>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	reg_wl_en: regulator-wl-en {
+		compatible = "regulator-fixed";
+		regulator-name = "wlan_en";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wl>;
+		gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <100>;
+		status = "disabled";
+	};
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3_bt>;
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
+		device-wakeup-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio5 26 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+};
+
+&usdhc3 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3_wl>;
+	vmmc-supply = <&reg_wl_en>;
+	bus-width = <4>;
+	non-removable;
+	no-1-8-v;
+	status = "disabled";
+
+	brmcf: wifi@1 {
+		compatible = "brcm,bcm4329-fmac";
+		reg = <1>;
+	};
+};
+
+&iomuxc {
+	pinctrl_uart3_bt: uart3grp-bt {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_EB3__UART3_RTS_B		0x1b0b1
+			MX6QDL_PAD_EIM_D23__UART3_CTS_B		0x1b0b1
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0xb0b1	/* BT ENABLE */
+			MX6QDL_PAD_SD3_DAT4__GPIO7_IO01		0xb0b1	/* DEV WAKEUP */
+			MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26	0xb0b1  /* HOST WAKEUP */
+		>;
+	};
+
+	pinctrl_usdhc3_wl: usdhc3grp-wl {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+		>;
+	};
+
+	pinctrl_wl: wlgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A25__GPIO5_IO02      0xb0b1	/* WLAN ENABLE */
+		>;
+	};
+};
diff --git a/dts/src/arm/imx6qdl-tqma6a.dtsi b/dts/src/arm/imx6qdl-tqma6a.dtsi
index b679bec78e..bfb67da64b 100644
--- a/dts/src/arm/imx6qdl-tqma6a.dtsi
+++ b/dts/src/arm/imx6qdl-tqma6a.dtsi
@@ -4,6 +4,12 @@
  * Copyright 2013-2017 Markus Niebel <Markus.Niebel@tq-group.com>
  */
 
+&fec {
+	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
+			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+	fsl,err006687-workaround-present;
+};
+
 &i2c1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c1>;
@@ -26,3 +32,17 @@
 		pagesize = <32>;
 	};
 };
+
+&iomuxc {
+	/*
+	 * This pinmuxing is required for the ERR006687 workaround. Board
+	 * DTS files that enable the FEC controller with
+	 * fsl,err006687-workaround-present must include this group.
+	 */
+	pinctrl_enet_fix: enetfixgrp {
+		fsl,pins = <
+			/* ENET ping patch */
+			MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1
+		>;
+	};
+};
diff --git a/dts/src/arm/imx6qdl-tx6.dtsi b/dts/src/arm/imx6qdl-tx6.dtsi
index 362e65ccaa..bcc5bbcce7 100644
--- a/dts/src/arm/imx6qdl-tx6.dtsi
+++ b/dts/src/arm/imx6qdl-tx6.dtsi
@@ -259,18 +259,6 @@
 		&gpio3 19 GPIO_ACTIVE_HIGH
 	>;
 	status = "disabled";
-
-	spidev0: spi@0 {
-		compatible = "spidev";
-		reg = <0>;
-		spi-max-frequency = <54000000>;
-	};
-
-	spidev1: spi@1 {
-		compatible = "spidev";
-		reg = <1>;
-		spi-max-frequency = <54000000>;
-	};
 };
 
 &fec {
diff --git a/dts/src/arm/imx6qdl.dtsi b/dts/src/arm/imx6qdl.dtsi
index f5de5def87..d27beb47f9 100644
--- a/dts/src/arm/imx6qdl.dtsi
+++ b/dts/src/arm/imx6qdl.dtsi
@@ -55,19 +55,19 @@
 
 	clocks {
 		ckil {
-			compatible = "fsl,imx-ckil", "fixed-clock";
+			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <32768>;
 		};
 
 		ckih1 {
-			compatible = "fsl,imx-ckih1", "fixed-clock";
+			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <0>;
 		};
 
 		osc {
-			compatible = "fsl,imx-osc", "fixed-clock";
+			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <24000000>;
 		};
@@ -481,7 +481,7 @@
 					status = "okay";
 				};
 
-				spba@203c000 {
+				spba-bus@203c000 {
 					reg = <0x0203c000 0x4000>;
 				};
 			};
diff --git a/dts/src/arm/imx6qp-mba6b.dts b/dts/src/arm/imx6qp-mba6b.dts
new file mode 100644
index 0000000000..eee2e09d6e
--- /dev/null
+++ b/dts/src/arm/imx6qp-mba6b.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2015-2021 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "imx6qp-tqma6b.dtsi"
+#include "imx6qdl-mba6.dtsi"
+#include "imx6qdl-mba6b.dtsi"
+#include "imx6q-mba6.dtsi"
+
+/ {
+	model = "TQ TQMa6QP on MBa6x";
+	compatible = "tq,imx6qp-mba6x-b", "tq,mba6b",
+		     "tq,imx6qp-tqma6qp-b", "fsl,imx6qp";
+};
diff --git a/dts/src/arm/imx6qp-phytec-mira-rdk-nand.dts b/dts/src/arm/imx6qp-phytec-mira-rdk-nand.dts
index f27d7ab426..a18266598d 100644
--- a/dts/src/arm/imx6qp-phytec-mira-rdk-nand.dts
+++ b/dts/src/arm/imx6qp-phytec-mira-rdk-nand.dts
@@ -8,6 +8,9 @@
 #include "imx6qp.dtsi"
 #include "imx6qdl-phytec-phycore-som.dtsi"
 #include "imx6qdl-phytec-mira.dtsi"
+#include "imx6qdl-phytec-mira-peb-eval-01.dtsi"
+#include "imx6qdl-phytec-mira-peb-av-02.dtsi"
+#include "imx6qdl-phytec-mira-peb-wlbt-05.dtsi"
 
 / {
 	model = "PHYTEC phyBOARD-Mira QuadPlus Carrier-Board with NAND";
diff --git a/dts/src/arm/imx6qp-yapp4-crux-plus.dts b/dts/src/arm/imx6qp-yapp4-crux-plus.dts
new file mode 100644
index 0000000000..cea165f216
--- /dev/null
+++ b/dts/src/arm/imx6qp-yapp4-crux-plus.dts
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2021 Y Soft Corporation, a.s.
+
+/dts-v1/;
+
+#include "imx6qp.dtsi"
+#include "imx6dl-yapp4-common.dtsi"
+
+/ {
+	model = "Y Soft IOTA Crux+ i.MX6QuadPlus board";
+	compatible = "ysoft,imx6qp-yapp4-crux-plus", "fsl,imx6qp";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0xf0000000>;
+	};
+};
+
+&gpio_oled {
+	status = "okay";
+};
+
+&leds {
+	status = "okay";
+};
+
+&oled_1305 {
+	status = "okay";
+};
+
+&oled_1309 {
+	status = "okay";
+};
+
+&reg_usb_h1_vbus {
+	status = "okay";
+};
+
+&touchkeys {
+	status = "okay";
+};
+
+&uart2 {
+	status = "disabled";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbphy2 {
+	status = "okay";
+};
diff --git a/dts/src/arm/imx6ul-imx6ull-opos6uldev.dtsi b/dts/src/arm/imx6ul-imx6ull-opos6uldev.dtsi
index 935a77d717..18cac19aa9 100644
--- a/dts/src/arm/imx6ul-imx6ull-opos6uldev.dtsi
+++ b/dts/src/arm/imx6ul-imx6ull-opos6uldev.dtsi
@@ -114,18 +114,6 @@
 	pinctrl-0 = <&pinctrl_ecspi4>;
 	cs-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>, <&gpio4 3 GPIO_ACTIVE_LOW>;
 	status = "okay";
-
-	spidev0: spi@0 {
-		compatible = "spidev";
-		reg = <0>;
-		spi-max-frequency = <5000000>;
-	};
-
-	spidev1: spi@1 {
-		compatible = "spidev";
-		reg = <1>;
-		spi-max-frequency = <5000000>;
-	};
 };
 
 &i2c1 {
diff --git a/dts/src/arm/imx6ul-phytec-segin-ff-rdk-nand.dts b/dts/src/arm/imx6ul-phytec-segin-ff-rdk-nand.dts
index bff98e6769..607eddc503 100644
--- a/dts/src/arm/imx6ul-phytec-segin-ff-rdk-nand.dts
+++ b/dts/src/arm/imx6ul-phytec-segin-ff-rdk-nand.dts
@@ -10,6 +10,7 @@
 #include "imx6ul-phytec-segin.dtsi"
 #include "imx6ul-phytec-segin-peb-eval-01.dtsi"
 #include "imx6ul-phytec-segin-peb-av-02.dtsi"
+#include "imx6ul-phytec-segin-peb-wlbt-05.dtsi"
 
 / {
 	model = "PHYTEC phyBOARD-Segin i.MX6 UltraLite Full Featured with NAND";
diff --git a/dts/src/arm/imx6ul-phytec-segin-peb-wlbt-05.dtsi b/dts/src/arm/imx6ul-phytec-segin-peb-wlbt-05.dtsi
new file mode 100644
index 0000000000..04477fd4b9
--- /dev/null
+++ b/dts/src/arm/imx6ul-phytec-segin-peb-wlbt-05.dtsi
@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2021 PHYTEC Messtechnik GmbH
+ * Author: Yunus Bas <y.bas@phytec.de>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	reg_wl_en: regulator-wl-en {
+		compatible = "regulator-fixed";
+		regulator-name = "wlan_en";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wl>;
+		gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <100>;
+		status = "disabled";
+	};
+};
+
+&iomuxc {
+	pinctrl_bt: btgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO01__GPIO1_IO01	0x3031	/* BT ENABLE */
+			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03	0x3031	/* HOST WAKEUP */
+			MX6UL_PAD_JTAG_MOD__GPIO1_IO10		0x3031	/* DEV WAKEUP */
+		>;
+	};
+
+	pinctrl_uart2_bt: uart2grp-bt {
+		fsl,pins = <
+			MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX   0x17059
+			MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX   0x17059
+			MX6UL_PAD_UART2_CTS_B__UART2_DCE_CTS    0x17059
+			MX6UL_PAD_UART2_RTS_B__UART2_DCE_RTS    0x17059
+		>;
+	};
+
+	pinctrl_usdhc2_wl: usdhc2grp-wl {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA18__USDHC2_CMD    0x10051
+			MX6UL_PAD_LCD_DATA19__USDHC2_CLK    0x10061
+			MX6UL_PAD_LCD_DATA20__USDHC2_DATA0  0x10051
+			MX6UL_PAD_LCD_DATA21__USDHC2_DATA1  0x10051
+			MX6UL_PAD_LCD_DATA22__USDHC2_DATA2  0x10051
+			MX6UL_PAD_LCD_DATA23__USDHC2_DATA3  0x10051
+		>;
+	};
+
+	pinctrl_wl: wlgrp {
+		fsl,pins = <
+			MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09  0x3031	/* WLAN ENABLE */
+		>;
+	};
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2_bt &pinctrl_bt>;
+	uart-has-rtscts;
+	status = "disabled";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+		device-wakeup-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&usdhc2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2_wl>;
+	vmmc-supply = <&reg_wl_en>;
+	bus-width = <4>;
+	non-removable;
+	no-1-8-v;
+	status = "disabled";
+
+	brmcf: wifi@1 {
+		compatible = "brcm,bcm4329-fmac";
+		reg = <1>;
+	};
+};
diff --git a/dts/src/arm/imx6ul-prti6g.dts b/dts/src/arm/imx6ul-prti6g.dts
index d62015701d..c18390f238 100644
--- a/dts/src/arm/imx6ul-prti6g.dts
+++ b/dts/src/arm/imx6ul-prti6g.dts
@@ -78,12 +78,6 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi2>;
 	status = "okay";
-
-	spi@0 {
-		compatible = "spidev";
-		reg = <0>;
-		spi-max-frequency = <1000000>;
-	};
 };
 
 &fec1 {
diff --git a/dts/src/arm/imx6ul-tx6ul.dtsi b/dts/src/arm/imx6ul-tx6ul.dtsi
index 938a32ced8..c485d058e0 100644
--- a/dts/src/arm/imx6ul-tx6ul.dtsi
+++ b/dts/src/arm/imx6ul-tx6ul.dtsi
@@ -227,18 +227,6 @@
 			&gpio1 10 GPIO_ACTIVE_HIGH
 		>;
 		status = "disabled";
-
-		spi@0 {
-			compatible = "spidev";
-			reg = <0>;
-			spi-max-frequency = <660000>;
-		};
-
-		spi@1 {
-			compatible = "spidev";
-			reg = <1>;
-			spi-max-frequency = <660000>;
-		};
 	};
 
 	sound {
@@ -290,18 +278,6 @@
 		&gpio1 10 GPIO_ACTIVE_HIGH
 	>;
 	status = "disabled";
-
-	spidev0: spi@0 {
-		compatible = "spidev";
-		reg = <0>;
-		spi-max-frequency = <60000000>;
-	};
-
-	spidev1: spi@1 {
-		compatible = "spidev";
-		reg = <1>;
-		spi-max-frequency = <60000000>;
-	};
 };
 
 &fec1 {
diff --git a/dts/src/arm/imx6ull-jozacp.dts b/dts/src/arm/imx6ull-jozacp.dts
new file mode 100644
index 0000000000..a152eeb78e
--- /dev/null
+++ b/dts/src/arm/imx6ull-jozacp.dts
@@ -0,0 +1,456 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2020 Protonic Holland
+ * Copyright (c) 2020 Oleksij Rempel <kernel@pengutronix.de>, Pengutronix
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include "imx6ull.dtsi"
+
+/ {
+	model = "JOZ Access Point";
+	compatible = "joz,jozacp", "fsl,imx6ull";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	/* On board name LED_RGB1 */
+	led-controller-1 {
+		compatible = "pwm-leds";
+
+		led-0 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <0>;
+			pwms = <&pwm1 0 10000000 0>;
+			max-brightness = <255>;
+		};
+
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <1>;
+			pwms = <&pwm3 0 10000000 0>;
+			max-brightness = <255>;
+		};
+
+		led-2 {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <2>;
+			pwms = <&pwm5 0 10000000 0>;
+			max-brightness = <255>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	/* On board name LED_RGB2 */
+	led-controller-2 {
+		compatible = "pwm-leds";
+
+		led-3 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <3>;
+			pwms = <&pwm2 0 10000000 0>;
+			max-brightness = <255>;
+		};
+
+		led-4 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <4>;
+			pwms = <&pwm4 0 10000000 0>;
+			max-brightness = <255>;
+		};
+
+		led-5 {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <5>;
+			pwms = <&pwm6 0 10000000 0>;
+			max-brightness = <255>;
+		};
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&reg_5v0>;
+	};
+
+	reg_5v0: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_vbus: regulator-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_vbus>;
+		regulator-name = "vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&reg_5v0>;
+		gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	usdhc2_wifi_pwrseq: usdhc2-wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wifi_npd>;
+		reset-gpios = <&gpio4 25 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	status = "okay";
+};
+
+&cpu0 {
+	clock-frequency = <792000000>;
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy0>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			reg = <0>;
+			clocks = <&clks IMX6UL_CLK_ENET_REF>;
+			clock-names = "rmii-ref";
+			interrupts-extended = <&gpio1 29 IRQ_TYPE_LEVEL_LOW>;
+			reset-gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <300>;
+		};
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "okay";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&pwm5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm5>;
+	status = "okay";
+};
+
+&pwm6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm6>;
+	status = "okay";
+};
+
+&snvs_rtc {
+	status = "disabled";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	dtr-gpios = <&gpio3 4 GPIO_ACTIVE_LOW>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
+	vbus-supply = <&reg_vbus>;
+	dr_mode = "host";
+	over-current-active-low;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	vmmc-supply = <&reg_3v3>;
+	bus-width = <8>;
+	no-1-8-v;
+	non-removable;
+	cap-mmc-hw-reset;
+	no-sd;
+	no-sdio;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	mmc-pwrseq = <&usdhc2_wifi_pwrseq>;
+	bus-width = <4>;
+	no-1-8-v;
+	no-mmc;
+	no-sd;
+	non-removable;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	wifi@1 {
+		compatible = "brcm,bcm4329-fmac";
+		reg = <1>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_can1: can1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX	0x1b0b0
+			MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX	0x1b0b0
+		>;
+	};
+
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO07__ENET1_MDC	 0x1b0b0
+			MX6UL_PAD_GPIO1_IO06__ENET1_MDIO	0x1b0b0
+			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x4001b031
+
+			MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28	0x038b0
+			MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29	0x170b0
+		>;
+	};
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			/* HW Revision */
+			MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08	0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA1__GPIO2_IO09	0x1b0b0
+			MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10	0x1b0b0
+
+			/* HW ID */
+			MX6UL_PAD_ENET2_TX_DATA0__GPIO2_IO11	0x1b0b0
+			MX6UL_PAD_ENET2_TX_DATA1__GPIO2_IO12	0x1b0b0
+			MX6UL_PAD_ENET2_TX_EN__GPIO2_IO13	0x1b0b0
+			MX6UL_PAD_ENET2_TX_CLK__GPIO2_IO14	0x1b0b0
+			MX6UL_PAD_ENET2_RX_ER__GPIO2_IO15	0x1b0b0
+
+			/* Digital inputs */
+			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03	0x11000
+			MX6UL_PAD_GPIO1_IO04__GPIO1_IO04	0x11000
+			MX6UL_PAD_GPIO1_IO05__GPIO1_IO05	0x11000
+			MX6UL_PAD_GPIO1_IO08__GPIO1_IO08	0x11000
+			MX6UL_PAD_GPIO1_IO09__GPIO1_IO09	0x11000
+
+			/* Isolated outputs */
+			MX6UL_PAD_UART2_TX_DATA__GPIO1_IO20	0x01020
+			MX6UL_PAD_UART2_RX_DATA__GPIO1_IO21	0x01020
+			MX6UL_PAD_UART2_RTS_B__GPIO1_IO23	0x01020
+			MX6UL_PAD_UART3_TX_DATA__GPIO1_IO24	0x01020
+			MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25	0x01020
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_MCLK__I2C1_SDA		0x4001f8b1
+			MX6UL_PAD_CSI_PIXCLK__I2C1_SCL		0x4001f8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6UL_PAD_UART5_RX_DATA__I2C2_SDA	0x4001f8b1
+			MX6UL_PAD_UART5_TX_DATA__I2C2_SCL	0x4001f8b1
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA00__PWM1_OUT		0x01010
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA01__PWM2_OUT		0x01010
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA02__PWM3_OUT		0x01010
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA03__PWM4_OUT		0x01010
+		>;
+	};
+
+	pinctrl_pwm5: pwm5grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA18__PWM5_OUT		0x01010
+		>;
+	};
+
+	pinctrl_pwm6: pwm6grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA19__PWM6_OUT		0x01010
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_CLK__UART4_DCE_TX		0x1b0b0
+			MX6UL_PAD_LCD_ENABLE__UART4_DCE_RX	0x1b0b0
+			MX6UL_PAD_LCD_HSYNC__UART4_DCE_CTS	0x1b0b0
+			MX6UL_PAD_LCD_VSYNC__UART4_DCE_RTS	0x1b0b0
+			MX6UL_PAD_LCD_RESET__GPIO3_IO04		0x1b0b0
+		>;
+	};
+
+	pinctrl_usbotg1: usbotg1grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO01__USB_OTG1_OC	0x1b0b0
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_WP_B__USDHC1_RESET_B	0x17099
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x1f099
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x10099
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x17099
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x17099
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x17099
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x17099
+			MX6UL_PAD_NAND_READY_B__USDHC1_DATA4	0x17099
+			MX6UL_PAD_NAND_CE0_B__USDHC1_DATA5	0x17099
+			MX6UL_PAD_NAND_CE1_B__USDHC1_DATA6	0x17099
+			MX6UL_PAD_NAND_CLE__USDHC1_DATA7	0x17099
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_VSYNC__USDHC2_CLK		0x100b9
+			MX6UL_PAD_CSI_HSYNC__USDHC2_CMD		0x170b9
+			MX6UL_PAD_CSI_DATA00__USDHC2_DATA0	0x170b9
+			MX6UL_PAD_CSI_DATA01__USDHC2_DATA1	0x170b9
+			MX6UL_PAD_CSI_DATA02__USDHC2_DATA2	0x170b9
+			MX6UL_PAD_CSI_DATA03__USDHC2_DATA3	0x170b9
+		>;
+	};
+
+	pinctrl_vbus: vbus0grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO02__GPIO1_IO02	0x030b0
+		>;
+	};
+
+	pinctrl_wifi_npd: wifigrp {
+		fsl,pins = <
+			/* WL_REG_ON */
+			MX6UL_PAD_CSI_DATA04__GPIO4_IO25	0x03020
+		>;
+	};
+};
+
+&iomuxc_snvs {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_snvs_hog>;
+
+	pinctrl_snvs_hog: snvs-hog-grp {
+		fsl,pins = <
+			/* Digital outputs */
+			MX6ULL_PAD_SNVS_TAMPER2__GPIO5_IO02	0x00020
+			MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03	0x00020
+			MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04	0x00020
+			MX6ULL_PAD_SNVS_TAMPER5__GPIO5_IO05	0x00020
+			MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06	0x00020
+
+			/* Digital outputs fault feedback */
+			MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00	0x17000
+			MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01	0x17000
+			MX6ULL_PAD_SNVS_TAMPER7__GPIO5_IO07	0x17000
+			MX6ULL_PAD_SNVS_TAMPER8__GPIO5_IO08	0x17000
+			MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09	0x17000
+		>;
+	};
+};
diff --git a/dts/src/arm/imx6ull-phytec-segin-ff-rdk-nand.dts b/dts/src/arm/imx6ull-phytec-segin-ff-rdk-nand.dts
index c8d3eff9ed..1d7362b5ac 100644
--- a/dts/src/arm/imx6ull-phytec-segin-ff-rdk-nand.dts
+++ b/dts/src/arm/imx6ull-phytec-segin-ff-rdk-nand.dts
@@ -10,6 +10,7 @@
 #include "imx6ull-phytec-segin.dtsi"
 #include "imx6ull-phytec-segin-peb-eval-01.dtsi"
 #include "imx6ull-phytec-segin-peb-av-02.dtsi"
+#include "imx6ull-phytec-segin-peb-wlbt-05.dtsi"
 
 / {
 	model = "PHYTEC phyBOARD-Segin i.MX6 ULL Full Featured with NAND";
diff --git a/dts/src/arm/imx6ull-phytec-segin-lc-rdk-nand.dts b/dts/src/arm/imx6ull-phytec-segin-lc-rdk-nand.dts
index e168494e0a..4bcbae024d 100644
--- a/dts/src/arm/imx6ull-phytec-segin-lc-rdk-nand.dts
+++ b/dts/src/arm/imx6ull-phytec-segin-lc-rdk-nand.dts
@@ -9,6 +9,7 @@
 #include "imx6ull-phytec-phycore-som.dtsi"
 #include "imx6ull-phytec-segin.dtsi"
 #include "imx6ull-phytec-segin-peb-eval-01.dtsi"
+#include "imx6ull-phytec-segin-peb-wlbt-05.dtsi"
 
 / {
 	model = "PHYTEC phyBOARD-Segin i.MX6 ULL Low Cost with NAND";
diff --git a/dts/src/arm/imx6ull-phytec-segin-peb-wlbt-05.dtsi b/dts/src/arm/imx6ull-phytec-segin-peb-wlbt-05.dtsi
new file mode 100644
index 0000000000..df25814a33
--- /dev/null
+++ b/dts/src/arm/imx6ull-phytec-segin-peb-wlbt-05.dtsi
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2021 PHYTEC Messtechnik GmbH
+ * Author: Yunus Bas <y.bas@phytec.de>
+ */
+
+#include "imx6ul-phytec-segin-peb-wlbt-05.dtsi"
+
+&iomuxc {
+	/delete-node/ wlgrp;
+};
+
+&iomuxc_snvs {
+	pinctrl_wl: wlgrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09	0x3031
+		>;
+	};
+};
diff --git a/dts/src/arm/imx6ulz-bsh-smm-m2.dts b/dts/src/arm/imx6ulz-bsh-smm-m2.dts
new file mode 100644
index 0000000000..59bcfc9a6b
--- /dev/null
+++ b/dts/src/arm/imx6ulz-bsh-smm-m2.dts
@@ -0,0 +1,146 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2021 BSH Hausgeraete GmbH
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "imx6ulz.dtsi"
+
+/ {
+	model = "BSH SMM M2";
+	compatible = "bsh,imx6ulz-bsh-smm-m2", "fsl,imx6ull", "fsl,imx6ulz";
+
+	chosen {
+		stdout-path = &uart4;
+	};
+
+	usdhc2_pwrseq: usdhc2-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio2 21 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	nand-on-flash-bbt;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm4330-bt";
+		max-speed = <3000000>;
+		shutdown-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+		device-wakeup-gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "peripheral";
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	status = "okay";
+};
+
+&usbphy1 {
+	fsl,tx-d-cal = <106>;
+};
+
+&usdhc2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wlan>;
+	bus-width = <4>;
+	no-1-8-v;
+	non-removable;
+	cap-power-off-card;
+	keep-power-in-suspend;
+	cap-sdio-irq;
+	mmc-pwrseq = <&usdhc2_pwrseq>;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&gpio1>;
+		interrupts = <18 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wake";
+	};
+};
+
+&wdog1 {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_gpmi_nand: gpmi-nand {
+		fsl,pins = <
+			MX6UL_PAD_NAND_CLE__RAWNAND_CLE		0xb0b1
+			MX6UL_PAD_NAND_ALE__RAWNAND_ALE		0xb0b1
+			MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B	0xb0b1
+			MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B	0xb000
+			MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B	0xb0b1
+			MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B	0xb0b1
+			MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B	0xb0b1
+			MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00	0xb0b1
+			MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01	0xb0b1
+			MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02	0xb0b1
+			MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03	0xb0b1
+			MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04	0xb0b1
+			MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05	0xb0b1
+			MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06	0xb0b1
+			MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07	0xb0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX	0x1b099
+			MX6UL_PAD_UART3_RTS_B__UART3_DCE_RTS	0x1b0b1
+			MX6UL_PAD_UART3_CTS_B__UART3_DCE_CTS	0x1b099
+			MX6UL_PAD_GPIO1_IO01__GPIO1_IO01	0x79		/* BT_REG_ON */
+			MX6UL_PAD_SD1_CLK__GPIO2_IO17		0x100b1		/* BT_DEV_WAKE out */
+			MX6UL_PAD_ENET2_TX_EN__GPIO2_IO13	0x1b0b0		/* BT_HOST_WAKE in */
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6UL_PAD_UART4_TX_DATA__UART4_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART4_RX_DATA__UART4_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_wlan: wlangrp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_HSYNC__USDHC2_CMD		0x17059
+			MX6UL_PAD_CSI_VSYNC__USDHC2_CLK		0x10059
+			MX6UL_PAD_CSI_DATA00__USDHC2_DATA0	0x17059
+			MX6UL_PAD_CSI_DATA01__USDHC2_DATA1	0x17059
+			MX6UL_PAD_CSI_DATA02__USDHC2_DATA2	0x17059
+			MX6UL_PAD_CSI_DATA03__USDHC2_DATA3	0x17059
+			MX6UL_PAD_SD1_DATA3__GPIO2_IO21		0x79		/* WL_REG_ON */
+			MX6UL_PAD_UART2_CTS_B__GPIO1_IO22	0x100b1		/* WL_DEV_WAKE - WiFi_GPIO_4 - WiFi FW UART */
+			MX6UL_PAD_UART1_CTS_B__GPIO1_IO18	0x1b0b1		/* WL_HOST_WAKE - WIFI_GPIO_0 - OOB IRQ */
+			MX6UL_PAD_ENET1_RX_EN__OSC32K_32K_OUT	0x4001b031	/* OSC 32Khz wifi clk in */
+		>;
+	};
+};
diff --git a/dts/src/arm/imx7d-remarkable2.dts b/dts/src/arm/imx7d-remarkable2.dts
index 89cbf13097..a2a91bfdd9 100644
--- a/dts/src/arm/imx7d-remarkable2.dts
+++ b/dts/src/arm/imx7d-remarkable2.dts
@@ -34,6 +34,19 @@
 		startup-delay-us = <150>;
 	};
 
+	reg_digitizer: regulator-digitizer {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_3V3_DIGITIZER";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&pinctrl_digitizer_reg>;
+		pinctrl-1 = <&pinctrl_digitizer_reg>;
+		gpio = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <100000>; /* 100 ms */
+	};
+
 	wifi_pwrseq: wifi_pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		pinctrl-names = "default";
@@ -51,6 +64,26 @@
 	assigned-clock-rates = <0>, <32768>;
 };
 
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	wacom_digitizer: digitizer@9 {
+		compatible = "hid-over-i2c";
+		reg = <0x09>;
+		hid-descr-addr = <0x01>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wacom>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+		touchscreen-inverted-x;
+		touchscreen-inverted-y;
+		vdd-supply = <&reg_digitizer>;
+	};
+};
+
 &snvs_pwrkey {
 	status = "okay";
 };
@@ -117,6 +150,25 @@
 	fsl,ext-reset-output;
 };
 
+&iomuxc_lpsr {
+	pinctrl_digitizer_reg: digitizerreggrp {
+		fsl,pins = <
+			/* DIGITIZER_PWR_EN */
+			MX7D_PAD_LPSR_GPIO1_IO06__GPIO1_IO6	0x14
+		>;
+	};
+
+	pinctrl_wacom: wacomgrp {
+		fsl,pins = <
+			/*MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5	0x00000014 FWE */
+			MX7D_PAD_LPSR_GPIO1_IO04__GPIO1_IO4	0x00000074 /* PDCTB */
+			MX7D_PAD_LPSR_GPIO1_IO01__GPIO1_IO1	0x00000034 /* WACOM INT */
+			/*MX7D_PAD_LPSR_GPIO1_IO06__GPIO1_IO6	0x00000014 WACOM PWR ENABLE */
+			/*MX7D_PAD_LPSR_GPIO1_IO00__GPIO1_IO0	0x00000074 WACOM RESET */
+		>;
+	};
+};
+
 &iomuxc {
 	pinctrl_brcm_reg: brcmreggrp {
 		fsl,pins = <
@@ -125,6 +177,13 @@
 		>;
 	};
 
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX7D_PAD_I2C1_SDA__I2C1_SDA		0x4000007f
+			MX7D_PAD_I2C1_SCL__I2C1_SCL		0x4000007f
+		>;
+	};
+
 	pinctrl_uart1: uart1grp {
 		fsl,pins = <
 			MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX	0x79
diff --git a/dts/src/arm/imx7s-warp.dts b/dts/src/arm/imx7s-warp.dts
index 569bbd84e3..4f1edef06c 100644
--- a/dts/src/arm/imx7s-warp.dts
+++ b/dts/src/arm/imx7s-warp.dts
@@ -248,17 +248,17 @@
 
 &mipi_csi {
 	clock-frequency = <166000000>;
-	fsl,csis-hs-settle = <3>;
 	status = "okay";
 
-	port@0 {
-		reg = <0>;
+	ports {
+		port@0 {
+			reg = <0>;
 
-		mipi_from_sensor: endpoint {
-			remote-endpoint = <&ov2680_to_mipi>;
-			data-lanes = <1>;
+			mipi_from_sensor: endpoint {
+				remote-endpoint = <&ov2680_to_mipi>;
+				data-lanes = <1>;
+			};
 		};
-
 	};
 };
 
diff --git a/dts/src/arm/imx7s.dtsi b/dts/src/arm/imx7s.dtsi
index 1843fc0538..52a9aeecdb 100644
--- a/dts/src/arm/imx7s.dtsi
+++ b/dts/src/arm/imx7s.dtsi
@@ -809,8 +809,6 @@
 			mipi_csi: mipi-csi@30750000 {
 				compatible = "fsl,imx7-mipi-csi2";
 				reg = <0x30750000 0x10000>;
-				#address-cells = <1>;
-				#size-cells = <0>;
 				interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX7D_IPG_ROOT_CLK>,
 					 <&clks IMX7D_MIPI_CSI_ROOT_CLK>,
@@ -819,18 +817,22 @@
 				power-domains = <&pgc_mipi_phy>;
 				phy-supply = <&reg_1p0d>;
 				resets = <&src IMX7_RESET_MIPI_PHY_MRST>;
-				reset-names = "mrst";
 				status = "disabled";
 
-				port@0 {
-					reg = <0>;
-				};
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
 
-				port@1 {
-					reg = <1>;
+					port@0 {
+						reg = <0>;
+					};
 
-					mipi_vc0_to_csi_mux: endpoint {
-						remote-endpoint = <&csi_mux_from_mipi_vc0>;
+					port@1 {
+						reg = <1>;
+
+						mipi_vc0_to_csi_mux: endpoint {
+							remote-endpoint = <&csi_mux_from_mipi_vc0>;
+						};
 					};
 				};
 			};
diff --git a/dts/src/arm/intel-ixp42x-freecom-fsg-3.dts b/dts/src/arm/intel-ixp42x-freecom-fsg-3.dts
index 598586fc08..b740403b05 100644
--- a/dts/src/arm/intel-ixp42x-freecom-fsg-3.dts
+++ b/dts/src/arm/intel-ixp42x-freecom-fsg-3.dts
@@ -97,6 +97,65 @@
 					fis-index-block = <0x1f>;
 				};
 			};
+
+			/* Small syscon with some LEDs at CS2 */
+			syscon@2,0 {
+				compatible = "freecom,fsg-cs2-system-controller", "syscon";
+				reg = <2 0x0 0x200>;
+				reg-io-width = <2>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <2 0x0 0x0 0x200>;
+
+				led@0,0 {
+					compatible = "register-bit-led";
+					reg = <0x00 0x02>;
+					mask = <0x01>;
+					label = "fsg:blue:wlan";
+					linux,default-trigger = "wlan";
+					default-state = "on";
+				};
+				led@0,1 {
+					compatible = "register-bit-led";
+					reg = <0x00 0x02>;
+					mask = <0x02>;
+					label = "fsg:blue:wan";
+					linux,default-trigger = "";
+					default-state = "on";
+				};
+				led@0,2 {
+					compatible = "register-bit-led";
+					reg = <0x00 0x02>;
+					mask = <0x04>;
+					label = "fsg:blue:sata";
+					linux,default-trigger = "";
+					default-state = "on";
+				};
+				led@0,3 {
+					compatible = "register-bit-led";
+					reg = <0x00 0x02>;
+					mask = <0x04>;
+					label = "fsg:blue:usb";
+					linux,default-trigger = "";
+					default-state = "on";
+				};
+				led@0,4 {
+					compatible = "register-bit-led";
+					reg = <0x00 0x02>;
+					mask = <0x08>;
+					label = "fsg:blue:sync";
+					linux,default-trigger = "";
+					default-state = "on";
+				};
+				led@0,5 {
+					compatible = "register-bit-led";
+					reg = <0x00 0x02>;
+					mask = <0x10>;
+					label = "fsg:blue:ring";
+					linux,default-trigger = "";
+					default-state = "on";
+				};
+			};
 		};
 
 		pci@c0000000 {
diff --git a/dts/src/arm/intel-ixp42x-gateway-7001.dts b/dts/src/arm/intel-ixp42x-gateway-7001.dts
new file mode 100644
index 0000000000..a1c03c965f
--- /dev/null
+++ b/dts/src/arm/intel-ixp42x-gateway-7001.dts
@@ -0,0 +1,111 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for Gateway 7001 AP
+ * Derived from boardfiles written by Imre Kaloz
+ */
+
+/dts-v1/;
+
+#include "intel-ixp42x.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Gateway 7001 AP";
+	compatible = "gateway,7001", "intel,ixp42x";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		/* 32 MB SDRAM */
+		device_type = "memory";
+		reg = <0x00000000 0x2000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = "uart1:115200n8";
+	};
+
+	aliases {
+		/* second UART is the primary console */
+		serial0 = &uart1;
+		serial1 = &uart0;
+	};
+
+	soc {
+		bus@c4000000 {
+			flash@0,0 {
+				compatible = "intel,ixp4xx-flash", "cfi-flash";
+				bank-width = <2>;
+				/*
+				 * 8 MB of flash
+				 */
+				reg = <0 0x00000000 0x800000>;
+
+				/* Configure expansion bus to allow writes */
+				intel,ixp4xx-eb-write-enable = <1>;
+
+				partitions {
+					compatible = "redboot-fis";
+					/* Eraseblock at 0x7e0000 */
+					fis-index-block = <0x3f>;
+				};
+			};
+		};
+
+		pci@c0000000 {
+			status = "ok";
+
+			/*
+			 * Taken from Gateway 7001 PCI boardfile (gateway7001-pci.c)
+			 * We have slots (IDSEL) 1 and 2 with one assigned IRQ
+			 * each handling all IRQs.
+			 */
+			interrupt-map =
+			/* IDSEL 1 */
+			<0x0800 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 11 */
+			<0x0800 0 0 2 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 1 is irq 11 */
+			<0x0800 0 0 3 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 1 is irq 11 */
+			<0x0800 0 0 4 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 1 is irq 11 */
+			/* IDSEL 2 */
+			<0x1000 0 0 1 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 2 is irq 10 */
+			<0x1000 0 0 2 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 2 is irq 10 */
+			<0x1000 0 0 3 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 2 is irq 10 */
+			<0x1000 0 0 4 &gpio0 10 IRQ_TYPE_LEVEL_LOW>; /* INT D on slot 2 is irq 10 */
+		};
+
+		ethernet@c8009000 {
+			status = "ok";
+			queue-rx = <&qmgr 3>;
+			queue-txready = <&qmgr 20>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy1>;
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				phy1: ethernet-phy@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		ethernet@c800a000 {
+			status = "ok";
+			queue-rx = <&qmgr 4>;
+			queue-txready = <&qmgr 21>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy2>;
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				phy2: ethernet-phy@2 {
+					reg = <2>;
+				};
+			};
+		};
+	};
+};
diff --git a/dts/src/arm/intel-ixp42x-goramo-multilink.dts b/dts/src/arm/intel-ixp42x-goramo-multilink.dts
new file mode 100644
index 0000000000..f80388b17a
--- /dev/null
+++ b/dts/src/arm/intel-ixp42x-goramo-multilink.dts
@@ -0,0 +1,180 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for the Goramo MultiLink Router
+ * There are two variants:
+ * - MultiLink Basic (a box)
+ * - MultiLink Max (19" rack mount)
+ * This device tree supports MultiLink Basic.
+ * This machine is based on IXP425.
+ * This is one of the few devices supporting the IXP4xx High-Speed Serial
+ * (HSS) link for a V.35 WAN interface.
+ * The hardware originates in Poland.
+ */
+
+/dts-v1/;
+
+#include "intel-ixp42x.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Goramo MultiLink Router";
+	compatible = "goramo,multilink-router", "intel,ixp42x";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		/*
+		 * 64 MB of RAM according to the manual. The MultiLink
+		 * Max has 128 MB.
+		 */
+		device_type = "memory";
+		reg = <0x00000000 0x4000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = "uart0:115200n8";
+	};
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	/*
+	 * 74HC4094 which is used as a rudimentary GPIO expander
+	 * FIXME:
+	 * - Create device tree bindings for this as GPIO expander
+	 * - Write a pure DT GPIO driver using these bindings
+	 * - Support cascading in the style of gpio-74x164.c (cannot be reused, very different)
+	 */
+	gpio_74: gpio-74hc4094 {
+		compatible = "nxp,74hc4094";
+		cp-gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
+		d-gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+		str-gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
+		/* oe-gpios is optional */
+		gpio-controller;
+		#gpio-cells = <2>;
+		/* We are not cascaded */
+		registers-number = <1>;
+		gpio-line-names = "CONTROL_HSS0_CLK_INT", "CONTROL_HSS1_CLK_INT", "CONTROL_HSS0_DTR_N",
+				"CONTROL_HSS1_DTR_N", "CONTROL_EXT", "CONTROL_AUTO_RESET",
+				"CONTROL_PCI_RESET_N", "CONTROL_EEPROM_WC_N";
+	};
+
+	soc {
+		bus@c4000000 {
+			flash@0,0 {
+				compatible = "intel,ixp4xx-flash", "cfi-flash";
+				bank-width = <2>;
+				/* Enable writes on the expansion bus */
+				intel,ixp4xx-eb-write-enable = <1>;
+				/* 16 MB of Flash mapped in at CS0 */
+				reg = <0 0x00000000 0x1000000>;
+
+				partitions {
+					compatible = "redboot-fis";
+					/* Eraseblock at 0x0fe0000 */
+					fis-index-block = <0x7f>;
+				};
+			};
+		};
+
+		pci@c0000000 {
+			status = "ok";
+
+			/*
+			 * The device has 4 slots (IDSEL) with one dedicated IRQ per slot.
+			 * The slots have Ethernet, Ethernet, NEC and MPCI.
+			 * The IDSELs are 11, 12, 13, 14.
+			 */
+			interrupt-map =
+			/* IDSEL 11 - Ethernet A */
+			<0x5800 0 0 1 &gpio0 4 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 11 is irq 4 */
+			<0x5800 0 0 2 &gpio0 4 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 11 is irq 4 */
+			<0x5800 0 0 3 &gpio0 4 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 11 is irq 4 */
+			<0x5800 0 0 4 &gpio0 4 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 11 is irq 4 */
+			/* IDSEL 12 - Ethernet B */
+			<0x6000 0 0 1 &gpio0 5 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 12 is irq 5 */
+			<0x6000 0 0 2 &gpio0 5 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 12 is irq 5 */
+			<0x6000 0 0 3 &gpio0 5 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 12 is irq 5 */
+			<0x6000 0 0 4 &gpio0 5 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 12 is irq 5 */
+			/* IDSEL 13 - MPCI */
+			<0x6800 0 0 1 &gpio0 12 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 13 is irq 12 */
+			<0x6800 0 0 2 &gpio0 12 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 13 is irq 12 */
+			<0x6800 0 0 3 &gpio0 12 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 13 is irq 12 */
+			<0x6800 0 0 4 &gpio0 12 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 13 is irq 12 */
+			/* IDSEL 14 - NEC */
+			<0x7000 0 0 1 &gpio0 3 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 14 is irq 3 */
+			<0x7000 0 0 2 &gpio0 3 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 14 is irq 3 */
+			<0x7000 0 0 3 &gpio0 3 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 14 is irq 3 */
+			<0x7000 0 0 4 &gpio0 3 IRQ_TYPE_LEVEL_LOW>; /* INT D on slot 14 is irq 3 */
+		};
+
+		/* HSS links */
+		npe@c8006000 {
+			hss@0 {
+				status = "okay";
+				intel,queue-chl-rxtrig = <&qmgr 12>;
+				intel,queue-chl-txready = <&qmgr 34>;
+				intel,queue-pkt-rx = <&qmgr 13>;
+				intel,queue-pkt-tx = <&qmgr 14>, <&qmgr 15>, <&qmgr 16>, <&qmgr 17>;
+				intel,queue-pkt-rxfree = <&qmgr 18>, <&qmgr 19>, <&qmgr 20>, <&qmgr 21>;
+				intel,queue-pkt-txdone = <&qmgr 22>;
+				/* The Goramo GPIO-based clock etc control */
+				cts-gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+				rts-gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+				dcd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+				dtr-gpios = <&gpio_74 2 GPIO_ACTIVE_LOW>;
+				clk-internal-gpios = <&gpio_74 0 GPIO_ACTIVE_HIGH>;
+			};
+			hss@1 {
+				status = "okay";
+				intel,queue-chl-rxtrig = <&qmgr 10>;
+				intel,queue-chl-txready = <&qmgr 35>;
+				intel,queue-pkt-rx = <&qmgr 0>;
+				intel,queue-pkt-tx = <&qmgr 5>, <&qmgr 6>, <&qmgr 7>, <&qmgr 8>;
+				intel,queue-pkt-rxfree = <&qmgr 1>, <&qmgr 2>, <&qmgr 3>, <&qmgr 4>;
+				intel,queue-pkt-txdone = <&qmgr 9>;
+				/* The Goramo GPIO-based clock etc control */
+				cts-gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+				rts-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+				dcd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+				dtr-gpios = <&gpio_74 3 GPIO_ACTIVE_LOW>;
+				clk-internal-gpios = <&gpio_74 1 GPIO_ACTIVE_HIGH>;
+			};
+		};
+
+		/* EthB */
+		ethernet@c8009000 {
+			status = "ok";
+			queue-rx = <&qmgr 3>;
+			queue-txready = <&qmgr 32>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy0>;
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				phy0: ethernet-phy@0 {
+					reg = <0>;
+				};
+
+				phy1: ethernet-phy@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		/* EthC */
+		ethernet@c800a000 {
+			status = "ok";
+			queue-rx = <&qmgr 4>;
+			queue-txready = <&qmgr 33>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy1>;
+		};
+	};
+};
diff --git a/dts/src/arm/intel-ixp4xx.dtsi b/dts/src/arm/intel-ixp4xx.dtsi
index 46fede0214..51a716c596 100644
--- a/dts/src/arm/intel-ixp4xx.dtsi
+++ b/dts/src/arm/intel-ixp4xx.dtsi
@@ -139,6 +139,23 @@
 		npe: npe@c8006000 {
 			compatible = "intel,ixp4xx-network-processing-engine";
 			reg = <0xc8006000 0x1000>, <0xc8007000 0x1000>, <0xc8008000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* NPE-A contains two high-speed serial links */
+			hss@0 {
+				compatible = "intel,ixp4xx-hss";
+				reg = <0>;
+				intel,npe-handle = <&npe 0>;
+				status = "disabled";
+			};
+
+			hss@1 {
+				compatible = "intel,ixp4xx-hss";
+				reg = <1>;
+				intel,npe-handle = <&npe 0>;
+				status = "disabled";
+			};
 
 			/* NPE-C contains a crypto accelerator */
 			crypto {
diff --git a/dts/src/arm/milbeaut-m10v.dtsi b/dts/src/arm/milbeaut-m10v.dtsi
index aa7c6caeb7..75f0c0af22 100644
--- a/dts/src/arm/milbeaut-m10v.dtsi
+++ b/dts/src/arm/milbeaut-m10v.dtsi
@@ -65,10 +65,18 @@
 			      <0x1d002000 0x1000>; /* CPU I/f base and size */
 		};
 
+		clk: clock-ctrl@1d021000 {
+			compatible = "socionext,milbeaut-m10v-ccu";
+			#clock-cells = <1>;
+			reg = <0x1d021000 0x1000>;
+			clocks = <&uclk40xi>;
+		};
+
 		timer@1e000050 { /* 32-bit Reload Timers */
 			compatible = "socionext,milbeaut-timer";
 			reg = <0x1e000050 0x20>;
 			interrupts = <0 91 4>;
+			clocks = <&clk 4>;
 		};
 
 		uart1: serial@1e700010 { /* PE4, PE5 */
@@ -77,6 +85,7 @@
 			reg = <0x1e700010 0x10>;
 			interrupts = <0 141 0x4>, <0 149 0x4>;
 			interrupt-names = "rx", "tx";
+			clocks = <&clk 2>;
 		};
 
 	};
diff --git a/dts/src/arm/motorola-mapphone-common.dtsi b/dts/src/arm/motorola-mapphone-common.dtsi
index a4423ff0df..c7a1f3ffc4 100644
--- a/dts/src/arm/motorola-mapphone-common.dtsi
+++ b/dts/src/arm/motorola-mapphone-common.dtsi
@@ -310,7 +310,7 @@
 	#address-cells = <1>;
 	#size-cells = <0>;
 	wlcore: wlcore@2 {
-		compatible = "ti,wl1285", "ti,wl1283";
+		compatible = "ti,wl1285";
 		reg = <2>;
 		/* gpio_100 with gpmc_wait2 pad as wakeirq */
 		interrupts-extended = <&gpio4 4 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/dts/src/arm/mt6589-fairphone-fp1.dts b/dts/src/arm/mt6589-fairphone-fp1.dts
new file mode 100644
index 0000000000..c952347981
--- /dev/null
+++ b/dts/src/arm/mt6589-fairphone-fp1.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Luca Weiss <luca@z3ntu.xyz>
+ */
+
+/dts-v1/;
+#include "mt6589.dtsi"
+
+/ {
+	model = "Fairphone 1";
+	compatible = "fairphone,fp1", "mediatek,mt6589";
+
+	chosen {
+		stdout-path = &uart3;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+};
+
+&cpus {
+	/* SMP is not stable on this board, makes the kernel panic */
+	/delete-property/ enable-method;
+};
+
+&uart3 {
+	status = "okay";
+};
diff --git a/dts/src/arm/mt6589.dtsi b/dts/src/arm/mt6589.dtsi
index 70df00a7bb..c6babc8ad2 100644
--- a/dts/src/arm/mt6589.dtsi
+++ b/dts/src/arm/mt6589.dtsi
@@ -14,7 +14,7 @@
 	compatible = "mediatek,mt6589";
 	interrupt-parent = <&sysirq>;
 
-	cpus {
+	cpus: cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		enable-method = "mediatek,mt6589-smp";
diff --git a/dts/src/arm/omap3-n900.dts b/dts/src/arm/omap3-n900.dts
index 32335d4ce4..d40c3d2c49 100644
--- a/dts/src/arm/omap3-n900.dts
+++ b/dts/src/arm/omap3-n900.dts
@@ -8,6 +8,7 @@
 
 #include "omap34xx.dtsi"
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
 
 /*
  * Default secure signed bootloader (Nokia X-Loader) does not enable L3 firewall
@@ -630,63 +631,92 @@
 	};
 
 	lp5523: lp5523@32 {
+		#address-cells = <1>;
+		#size-cells = <0>;
 		compatible = "national,lp5523";
 		reg = <0x32>;
 		clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */
-		enable-gpio = <&gpio2 9 GPIO_ACTIVE_HIGH>; /* 41 */
+		enable-gpios = <&gpio2 9 GPIO_ACTIVE_HIGH>; /* 41 */
 
-		chan0 {
+		led@0 {
+			reg = <0>;
 			chan-name = "lp5523:kb1";
 			led-cur = /bits/ 8 <50>;
 			max-cur = /bits/ 8 <100>;
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_KBD_BACKLIGHT;
 		};
 
-		chan1 {
+		led@1 {
+			reg = <1>;
 			chan-name = "lp5523:kb2";
 			led-cur = /bits/ 8 <50>;
 			max-cur = /bits/ 8 <100>;
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_KBD_BACKLIGHT;
 		};
 
-		chan2 {
+		led@2 {
+			reg = <2>;
 			chan-name = "lp5523:kb3";
 			led-cur = /bits/ 8 <50>;
 			max-cur = /bits/ 8 <100>;
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_KBD_BACKLIGHT;
 		};
 
-		chan3 {
+		led@3 {
+			reg = <3>;
 			chan-name = "lp5523:kb4";
 			led-cur = /bits/ 8 <50>;
 			max-cur = /bits/ 8 <100>;
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_KBD_BACKLIGHT;
 		};
 
-		chan4 {
+		led@4 {
+			reg = <4>;
 			chan-name = "lp5523:b";
 			led-cur = /bits/ 8 <50>;
 			max-cur = /bits/ 8 <100>;
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_STATUS;
 		};
 
-		chan5 {
+		led@5 {
+			reg = <5>;
 			chan-name = "lp5523:g";
 			led-cur = /bits/ 8 <50>;
 			max-cur = /bits/ 8 <100>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
 		};
 
-		chan6 {
+		led@6 {
+			reg = <6>;
 			chan-name = "lp5523:r";
 			led-cur = /bits/ 8 <50>;
 			max-cur = /bits/ 8 <100>;
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_STATUS;
 		};
 
-		chan7 {
+		led@7 {
+			reg = <7>;
 			chan-name = "lp5523:kb5";
 			led-cur = /bits/ 8 <50>;
 			max-cur = /bits/ 8 <100>;
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_KBD_BACKLIGHT;
 		};
 
-		chan8 {
+		led@8 {
+			reg = <8>;
 			chan-name = "lp5523:kb6";
 			led-cur = /bits/ 8 <50>;
 			max-cur = /bits/ 8 <100>;
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_KBD_BACKLIGHT;
 		};
 	};
 
diff --git a/dts/src/arm/omap3-tao3530.dtsi b/dts/src/arm/omap3-tao3530.dtsi
index 580bfa1931..7f440d11f7 100644
--- a/dts/src/arm/omap3-tao3530.dtsi
+++ b/dts/src/arm/omap3-tao3530.dtsi
@@ -197,25 +197,11 @@
 &mcspi1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mcspi1_pins>;
-
-	spidev@0 {
-		compatible = "spidev";
-		spi-max-frequency = <48000000>;
-		reg = <0>;
-		spi-cpha;
-	};
 };
 
 &mcspi3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mcspi3_pins>;
-
-	spidev@0 {
-		compatible = "spidev";
-		spi-max-frequency = <48000000>;
-		reg = <0>;
-		spi-cpha;
-	};
 };
 
 #include "twl4030.dtsi"
diff --git a/dts/src/arm/openbmc-flash-layout-64-alt.dtsi b/dts/src/arm/openbmc-flash-layout-64-alt.dtsi
new file mode 100644
index 0000000000..6505258675
--- /dev/null
+++ b/dts/src/arm/openbmc-flash-layout-64-alt.dtsi
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2020 Bytedance.
+ */
+
+partitions {
+	compatible = "fixed-partitions";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	u-boot@0 {
+		reg = <0x0 0xe0000>; // 896KB
+		label = "alt-u-boot";
+	};
+
+	u-boot-env@e0000 {
+		reg = <0xe0000 0x20000>; // 128KB
+		label = "alt-u-boot-env";
+	};
+
+	kernel@100000 {
+		reg = <0x100000 0x900000>; // 9MB
+		label = "alt-kernel";
+	};
+
+	rofs@a00000 {
+		reg = <0xa00000 0x2000000>; // 32MB
+		label = "alt-rofs";
+	};
+
+	rwfs@6000000 {
+		reg = <0x2a00000 0x1600000>; // 22MB
+		label = "alt-rwfs";
+	};
+};
diff --git a/dts/src/arm/qcom-apq8016-sbc.dts b/dts/src/arm/qcom-apq8016-sbc.dts
new file mode 100644
index 0000000000..4ccd2dca74
--- /dev/null
+++ b/dts/src/arm/qcom-apq8016-sbc.dts
@@ -0,0 +1,2 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include "arm64/qcom/apq8016-sbc.dts"
diff --git a/dts/src/arm/qcom-apq8064-sony-xperia-yuga.dts b/dts/src/arm/qcom-apq8064-sony-xperia-yuga.dts
index f8c97efc61..0cee62c7b8 100644
--- a/dts/src/arm/qcom-apq8064-sony-xperia-yuga.dts
+++ b/dts/src/arm/qcom-apq8064-sony-xperia-yuga.dts
@@ -19,7 +19,6 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		input-name = "gpio-keys";
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&gpio_keys_pin_a>;
diff --git a/dts/src/arm/qcom-ipq4019.dtsi b/dts/src/arm/qcom-ipq4019.dtsi
index ff1bdb10ad..7dec055363 100644
--- a/dts/src/arm/qcom-ipq4019.dtsi
+++ b/dts/src/arm/qcom-ipq4019.dtsi
@@ -637,7 +637,7 @@
 		};
 
 		usb3: usb3@8af8800 {
-			compatible = "qcom,dwc3";
+			compatible = "qcom,ipq4019-dwc3", "qcom,dwc3";
 			reg = <0x8af8800 0x100>;
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -669,7 +669,7 @@
 		};
 
 		usb2: usb2@60f8800 {
-			compatible = "qcom,dwc3";
+			compatible = "qcom,ipq4019-dwc3", "qcom,dwc3";
 			reg = <0x60f8800 0x100>;
 			#address-cells = <1>;
 			#size-cells = <1>;
diff --git a/dts/src/arm/qcom-ipq8064.dtsi b/dts/src/arm/qcom-ipq8064.dtsi
index 11481313bd..996f4458d9 100644
--- a/dts/src/arm/qcom-ipq8064.dtsi
+++ b/dts/src/arm/qcom-ipq8064.dtsi
@@ -1080,7 +1080,7 @@
 		};
 
 		usb3_0: usb3@100f8800 {
-			compatible = "qcom,dwc3", "syscon";
+			compatible = "qcom,ipq8064-dwc3", "qcom,dwc3";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			reg = <0x100f8800 0x8000>;
@@ -1122,7 +1122,7 @@
 		};
 
 		usb3_1: usb3@110f8800 {
-			compatible = "qcom,dwc3", "syscon";
+			compatible = "qcom,ipq8064-dwc3", "qcom,dwc3";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			reg = <0x110f8800 0x8000>;
diff --git a/dts/src/arm/qcom-mdm9615-wp8548-mangoh-green.dts b/dts/src/arm/qcom-mdm9615-wp8548-mangoh-green.dts
index 942e3a2cac..0827de5426 100644
--- a/dts/src/arm/qcom-mdm9615-wp8548-mangoh-green.dts
+++ b/dts/src/arm/qcom-mdm9615-wp8548-mangoh-green.dts
@@ -103,7 +103,7 @@
 
 &gsbi3_spi {
 	spi@0 {
-		compatible = "swir,mangoh-iotport-spi", "spidev";
+		compatible = "swir,mangoh-iotport-spi";
 		spi-max-frequency = <24000000>;
 		reg = <0>;
 	};
diff --git a/dts/src/arm/qcom-msm8974-fairphone-fp2.dts b/dts/src/arm/qcom-msm8974-fairphone-fp2.dts
index ea15b645b2..6d77e0f8ca 100644
--- a/dts/src/arm/qcom-msm8974-fairphone-fp2.dts
+++ b/dts/src/arm/qcom-msm8974-fairphone-fp2.dts
@@ -20,7 +20,6 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		input-name = "gpio-keys";
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&gpio_keys_pin_a>;
diff --git a/dts/src/arm/qcom-msm8974-lge-nexus5-hammerhead.dts b/dts/src/arm/qcom-msm8974-lge-nexus5-hammerhead.dts
index 30ee913faa..0691361701 100644
--- a/dts/src/arm/qcom-msm8974-lge-nexus5-hammerhead.dts
+++ b/dts/src/arm/qcom-msm8974-lge-nexus5-hammerhead.dts
@@ -450,7 +450,6 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		input-name = "gpio-keys";
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&gpio_keys_pin_a>;
diff --git a/dts/src/arm/qcom-msm8974-samsung-klte.dts b/dts/src/arm/qcom-msm8974-samsung-klte.dts
index 003f0fa9c8..96e1c978b8 100644
--- a/dts/src/arm/qcom-msm8974-samsung-klte.dts
+++ b/dts/src/arm/qcom-msm8974-samsung-klte.dts
@@ -349,7 +349,6 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		input-name = "gpio-keys";
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&gpio_keys_pin_a>;
diff --git a/dts/src/arm/qcom-msm8974-sony-xperia-amami.dts b/dts/src/arm/qcom-msm8974-sony-xperia-amami.dts
index 398a3eaf30..79e2cfbbb1 100644
--- a/dts/src/arm/qcom-msm8974-sony-xperia-amami.dts
+++ b/dts/src/arm/qcom-msm8974-sony-xperia-amami.dts
@@ -20,7 +20,6 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		input-name = "gpio-keys";
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&gpio_keys_pin_a>;
diff --git a/dts/src/arm/qcom-msm8974-sony-xperia-castor.dts b/dts/src/arm/qcom-msm8974-sony-xperia-castor.dts
index b4dd85bd4f..e66937e3f7 100644
--- a/dts/src/arm/qcom-msm8974-sony-xperia-castor.dts
+++ b/dts/src/arm/qcom-msm8974-sony-xperia-castor.dts
@@ -20,7 +20,6 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		input-name = "gpio-keys";
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&gpio_keys_pin_a>;
diff --git a/dts/src/arm/qcom-msm8974-sony-xperia-honami.dts b/dts/src/arm/qcom-msm8974-sony-xperia-honami.dts
index 9743beebd8..a62e5c25b2 100644
--- a/dts/src/arm/qcom-msm8974-sony-xperia-honami.dts
+++ b/dts/src/arm/qcom-msm8974-sony-xperia-honami.dts
@@ -20,7 +20,6 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		input-name = "gpio-keys";
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&gpio_keys_pin_a>;
diff --git a/dts/src/arm/qcom-sdx55-t55.dts b/dts/src/arm/qcom-sdx55-t55.dts
index 2ffcd08590..7ed8feb99a 100644
--- a/dts/src/arm/qcom-sdx55-t55.dts
+++ b/dts/src/arm/qcom-sdx55-t55.dts
@@ -236,6 +236,12 @@
 	status = "ok";
 };
 
+&ipa {
+	status = "okay";
+
+	memory-region = <&ipa_fw_mem>;
+};
+
 &qpic_bam {
 	status = "ok";
 };
diff --git a/dts/src/arm/qcom-sdx55-telit-fn980-tlb.dts b/dts/src/arm/qcom-sdx55-telit-fn980-tlb.dts
index 80c40da796..a4fa468a09 100644
--- a/dts/src/arm/qcom-sdx55-telit-fn980-tlb.dts
+++ b/dts/src/arm/qcom-sdx55-telit-fn980-tlb.dts
@@ -236,6 +236,27 @@
 	status = "ok";
 };
 
+&ipa {
+	status = "okay";
+
+	memory-region = <&ipa_fw_mem>;
+};
+
+&pcie0_phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l1e_bb_1p2>;
+	vdda-pll-supply = <&vreg_l4e_bb_0p875>;
+};
+
+&pcie_ep {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_ep_clkreq_default &pcie_ep_perst_default
+		     &pcie_ep_wake_default>;
+};
+
 &qpic_bam {
 	status = "ok";
 };
@@ -260,6 +281,44 @@
 	memory-region = <&mpss_adsp_mem>;
 };
 
+&tlmm {
+	pcie_ep_clkreq_default: pcie_ep_clkreq_default {
+		mux {
+			pins = "gpio56";
+			function = "pcie_clkreq";
+		};
+		config {
+			pins = "gpio56";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
+	pcie_ep_perst_default: pcie_ep_perst_default {
+		mux {
+			pins = "gpio57";
+			function = "gpio";
+		};
+		config {
+			pins = "gpio57";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+	};
+
+	pcie_ep_wake_default: pcie_ep_wake_default {
+		mux {
+			pins = "gpio53";
+			function = "gpio";
+		};
+		config {
+			pins = "gpio53";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+};
+
 &usb_hsphy {
 	status = "okay";
 	vdda-pll-supply = <&vreg_l4e_bb_0p875>;
diff --git a/dts/src/arm/qcom-sdx55.dtsi b/dts/src/arm/qcom-sdx55.dtsi
index 44526ad9d2..8ac0492c76 100644
--- a/dts/src/arm/qcom-sdx55.dtsi
+++ b/dts/src/arm/qcom-sdx55.dtsi
@@ -8,6 +8,7 @@
 
 #include <dt-bindings/clock/qcom,gcc-sdx55.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interconnect/qcom,sdx55.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
@@ -309,6 +310,41 @@
 			status = "disabled";
 		};
 
+		pcie0_phy: phy@1c07000 {
+			compatible = "qcom,sdx55-qmp-pcie-phy";
+			reg = <0x01c07000 0x1c4>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&gcc GCC_PCIE_AUX_PHY_CLK_SRC>,
+				 <&gcc GCC_PCIE_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_0_CLKREF_CLK>,
+				 <&gcc GCC_PCIE_RCHNG_PHY_CLK>;
+			clock-names = "aux", "cfg_ahb", "ref", "refgen";
+
+			resets = <&gcc GCC_PCIE_PHY_BCR>;
+			reset-names = "phy";
+
+			assigned-clocks = <&gcc GCC_PCIE_RCHNG_PHY_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			status = "disabled";
+
+			pcie0_lane: lanes@1c06000 {
+				reg = <0x01c06000 0x104>, /* tx0 */
+				      <0x01c06200 0x328>, /* rx0 */
+				      <0x01c07200 0x1e8>, /* pcs */
+				      <0x01c06800 0x104>, /* tx1 */
+				      <0x01c06a00 0x328>, /* rx1 */
+				      <0x01c07600 0x800>; /* pcs_misc */
+				clocks = <&gcc GCC_PCIE_PIPE_CLK>;
+				clock-names = "pipe0";
+
+				#phy-cells = <0>;
+				clock-output-names = "pcie_pipe_clk";
+			};
+		};
+
 		ipa: ipa@1e40000 {
 			compatible = "qcom,sdx55-ipa";
 
@@ -333,12 +369,10 @@
 			clocks = <&rpmhcc RPMH_IPA_CLK>;
 			clock-names = "core";
 
-			interconnects = <&system_noc MASTER_IPA &system_noc SLAVE_SNOC_MEM_NOC_GC>,
-					<&mem_noc MASTER_SNOC_GC_MEM_NOC &mc_virt SLAVE_EBI_CH0>,
+			interconnects = <&system_noc MASTER_IPA &mc_virt SLAVE_EBI_CH0>,
 					<&system_noc MASTER_IPA &system_noc SLAVE_OCIMEM>,
 					<&mem_noc MASTER_AMPSS_M0 &system_noc SLAVE_IPA_CFG>;
-			interconnect-names = "memory-a",
-					     "memory-b",
+			interconnect-names = "memory",
 					     "imem",
 					     "config";
 
@@ -356,6 +390,11 @@
 			#hwlock-cells = <1>;
 		};
 
+		tcsr: syscon@1fcb000 {
+			compatible = "syscon";
+			reg = <0x01fc0000 0x1000>;
+		};
+
 		sdhc_1: sdhci@8804000 {
 			compatible = "qcom,sdx55-sdhci", "qcom,sdhci-msm-v5";
 			reg = <0x08804000 0x1000>;
@@ -368,6 +407,45 @@
 			status = "disabled";
 		};
 
+		pcie_ep: pcie-ep@40000000 {
+			compatible = "qcom,sdx55-pcie-ep";
+			reg = <0x01c00000 0x3000>,
+			      <0x40000000 0xf1d>,
+			      <0x40000f20 0xc8>,
+			      <0x40001000 0x1000>,
+			      <0x40002000 0x10000>,
+			      <0x01c03000 0x3000>;
+			reg-names = "parf", "dbi", "elbi", "atu", "addr_space",
+				    "mmio";
+
+			qcom,perst-regs = <&tcsr 0xb258 0xb270>;
+
+			clocks = <&gcc GCC_PCIE_AUX_CLK>,
+				 <&gcc GCC_PCIE_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_PCIE_SLEEP_CLK>,
+				 <&gcc GCC_PCIE_0_CLKREF_CLK>;
+			clock-names = "aux", "cfg", "bus_master", "bus_slave",
+				      "slave_q2a", "sleep", "ref";
+
+			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "global", "doorbell";
+			reset-gpios = <&tlmm 57 GPIO_ACTIVE_LOW>;
+			wake-gpios = <&tlmm 53 GPIO_ACTIVE_LOW>;
+			resets = <&gcc GCC_PCIE_BCR>;
+			reset-names = "core";
+			power-domains = <&gcc PCIE_GDSC>;
+			phys = <&pcie0_lane>;
+			phy-names = "pciephy";
+			max-link-speed = <3>;
+			num-lanes = <2>;
+
+			status = "disabled";
+		};
+
 		remoteproc_mpss: remoteproc@4080000 {
 			compatible = "qcom,sdx55-mpss-pas";
 			reg = <0x04080000 0x4040>;
diff --git a/dts/src/arm/qcom-sdx65-mtp.dts b/dts/src/arm/qcom-sdx65-mtp.dts
new file mode 100644
index 0000000000..59457da8e5
--- /dev/null
+++ b/dts/src/arm/qcom-sdx65-mtp.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+/dts-v1/;
+
+#include "qcom-sdx65.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. SDX65 MTP";
+	compatible = "qcom,sdx65-mtp", "qcom,sdx65";
+	qcom,board-id = <0x2010008 0x302>;
+
+	aliases {
+		serial0 = &blsp1_uart3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&blsp1_uart3 {
+	status = "ok";
+};
diff --git a/dts/src/arm/qcom-sdx65.dtsi b/dts/src/arm/qcom-sdx65.dtsi
new file mode 100644
index 0000000000..796641d30e
--- /dev/null
+++ b/dts/src/arm/qcom-sdx65.dtsi
@@ -0,0 +1,222 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * SDX65 SoC device tree source
+ *
+ * Copyright (c) 2021 Qualcomm Innovation Center, Inc. All rights reserved.
+ *
+ */
+
+#include <dt-bindings/clock/qcom,gcc-sdx65.h>
+#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	qcom,msm-id = <458 0x10000>, <483 0x10000>, <509 0x10000>;
+	interrupt-parent = <&intc>;
+
+	memory {
+		device_type = "memory";
+		reg = <0 0>;
+	};
+
+	clocks {
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			clock-frequency = <76800000>;
+			clock-output-names = "xo_board";
+			#clock-cells = <0>;
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <32764>;
+			clock-output-names = "sleep_clk";
+			#clock-cells = <0>;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+			enable-method = "psci";
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		cmd_db: reserved-memory@8fee0000 {
+			compatible = "qcom,cmd-db";
+			reg = <0x8fee0000 0x20000>;
+			no-map;
+		};
+	};
+
+	soc: soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		compatible = "simple-bus";
+
+		gcc: clock-controller@100000 {
+			compatible = "qcom,gcc-sdx65";
+			reg = <0x00100000 0x001f7400>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>;
+			clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		blsp1_uart3: serial@831000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x00831000 0x200>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
+		tlmm: pinctrl@f100000 {
+			compatible = "qcom,sdx65-tlmm";
+			reg = <0xf100000 0x300000>;
+			interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&tlmm 0 0 109>;
+			interrupt-controller;
+			interrupt-parent = <&intc>;
+			#interrupt-cells = <2>;
+		};
+
+		pdc: interrupt-controller@b210000 {
+			compatible = "qcom,sdx65-pdc", "qcom,pdc";
+			reg = <0xb210000 0x10000>;
+			qcom,pdc-ranges = <0 147 52>, <52 266 32>;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&intc>;
+			interrupt-controller;
+		};
+
+		intc: interrupt-controller@17800000 {
+			compatible = "qcom,msm-qgic2";
+			interrupt-controller;
+			interrupt-parent = <&intc>;
+			#interrupt-cells = <3>;
+			reg = <0x17800000 0x1000>,
+			      <0x17802000 0x1000>;
+		};
+
+		timer@17820000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			compatible = "arm,armv7-timer-mem";
+			reg = <0x17820000 0x1000>;
+			clock-frequency = <19200000>;
+
+			frame@17821000 {
+				frame-number = <0>;
+				interrupts = <GIC_SPI 7 0x4>,
+					     <GIC_SPI 6 0x4>;
+				reg = <0x17821000 0x1000>,
+				      <0x17822000 0x1000>;
+			};
+
+			frame@17823000 {
+				frame-number = <1>;
+				interrupts = <GIC_SPI 8 0x4>;
+				reg = <0x17823000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17824000 {
+				frame-number = <2>;
+				interrupts = <GIC_SPI 9 0x4>;
+				reg = <0x17824000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17825000 {
+				frame-number = <3>;
+				interrupts = <GIC_SPI 10 0x4>;
+				reg = <0x17825000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17826000 {
+				frame-number = <4>;
+				interrupts = <GIC_SPI 11 0x4>;
+				reg = <0x17826000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17827000 {
+				frame-number = <5>;
+				interrupts = <GIC_SPI 12 0x4>;
+				reg = <0x17827000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17828000 {
+				frame-number = <6>;
+				interrupts = <GIC_SPI 13 0x4>;
+				reg = <0x17828000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17829000 {
+				frame-number = <7>;
+				interrupts = <GIC_SPI 14 0x4>;
+				reg = <0x17829000 0x1000>;
+				status = "disabled";
+			};
+		};
+
+		apps_rsc: rsc@17830000 {
+			label = "apps_rsc";
+			compatible = "qcom,rpmh-rsc";
+			reg = <0x17830000 0x10000>,
+			    <0x17840000 0x10000>;
+			reg-names = "drv-0", "drv-1";
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+				   <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,tcs-offset = <0xd00>;
+			qcom,drv-id = <1>;
+			qcom,tcs-config = <ACTIVE_TCS  2>,
+				<SLEEP_TCS   2>,
+				<WAKE_TCS    2>,
+				<CONTROL_TCS 1>;
+
+			rpmhcc: clock-controller@1 {
+				compatible = "qcom,sdx65-rpmh-clk";
+				#clock-cells = <1>;
+				clock-names = "xo";
+				clocks = <&xo_board>;
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <1 13 0xf08>,
+			<1 12 0xf08>,
+			<1 10 0xf08>,
+			<1 11 0xf08>;
+		clock-frequency = <19200000>;
+	};
+};
diff --git a/dts/src/arm/r8a7742-iwg21d-q7-dbcm-ca.dts b/dts/src/arm/r8a7742-iwg21d-q7-dbcm-ca.dts
index 33db5938f2..3c8a7c8b1f 100644
--- a/dts/src/arm/r8a7742-iwg21d-q7-dbcm-ca.dts
+++ b/dts/src/arm/r8a7742-iwg21d-q7-dbcm-ca.dts
@@ -44,6 +44,22 @@
 		#clock-cells = <0>;
 		clock-frequency = <26000000>;
 	};
+
+	reg_1p8v: 1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	reg_2p8v: 2p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P8V";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		regulator-always-on;
+	};
 };
 
 &avb {
diff --git a/dts/src/arm/r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi b/dts/src/arm/r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi
index 70c72ba4fe..40cef0b1d1 100644
--- a/dts/src/arm/r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi
+++ b/dts/src/arm/r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi
@@ -17,6 +17,9 @@
 		reg = <0x3c>;
 		clocks = <&MCLK_CAM>;
 		clock-names = "xclk";
+		AVDD-supply = <&reg_2p8v>;
+		DOVDD-supply = <&reg_2p8v>;
+		DVDD-supply = <&reg_1p8v>;
 		status = "okay";
 
 		port {
diff --git a/dts/src/arm/sama5d2.dtsi b/dts/src/arm/sama5d2.dtsi
index 801969c113..09c741e8ec 100644
--- a/dts/src/arm/sama5d2.dtsi
+++ b/dts/src/arm/sama5d2.dtsi
@@ -288,6 +288,7 @@
 				reg-names = "qspi_base", "qspi_mmap";
 				interrupts = <52 IRQ_TYPE_LEVEL_HIGH 7>;
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 52>;
+				clock-names = "pclk";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -299,6 +300,7 @@
 				reg-names = "qspi_base", "qspi_mmap";
 				interrupts = <53 IRQ_TYPE_LEVEL_HIGH 7>;
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 53>;
+				clock-names = "pclk";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
diff --git a/dts/src/arm/sama7g5-pinfunc.h b/dts/src/arm/sama7g5-pinfunc.h
index 22fe9e522a..4eb30445d2 100644
--- a/dts/src/arm/sama7g5-pinfunc.h
+++ b/dts/src/arm/sama7g5-pinfunc.h
@@ -765,7 +765,7 @@
 #define PIN_PD20__PCK0			PINMUX_PIN(PIN_PD20, 1, 3)
 #define PIN_PD20__FLEXCOM2_IO3		PINMUX_PIN(PIN_PD20, 2, 2)
 #define PIN_PD20__PWMH3			PINMUX_PIN(PIN_PD20, 3, 4)
-#define PIN_PD20__CANTX4		PINMUX_PIN(PIN_PD20, 5, 2)
+#define PIN_PD20__CANTX4		PINMUX_PIN(PIN_PD20, 4, 2)
 #define PIN_PD20__FLEXCOM5_IO0		PINMUX_PIN(PIN_PD20, 6, 5)
 #define PIN_PD21			117
 #define PIN_PD21__GPIO			PINMUX_PIN(PIN_PD21, 0, 0)
diff --git a/dts/src/arm/sama7g5.dtsi b/dts/src/arm/sama7g5.dtsi
index 7039311bf6..eddcfbf4d2 100644
--- a/dts/src/arm/sama7g5.dtsi
+++ b/dts/src/arm/sama7g5.dtsi
@@ -181,6 +181,36 @@
 			clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
 		};
 
+		qspi0: spi@e080c000 {
+			compatible = "microchip,sama7g5-ospi";
+			reg = <0xe080c000 0x400>, <0x20000000 0x10000000>;
+			reg-names = "qspi_base", "qspi_mmap";
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(41)>,
+			       <&dma0 AT91_XDMAC_DT_PERID(40)>;
+			dma-names = "tx", "rx";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 78>, <&pmc PMC_TYPE_GCK 78>;
+			clock-names = "pclk", "gclk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		qspi1: spi@e0810000 {
+			compatible = "microchip,sama7g5-qspi";
+			reg = <0xe0810000 0x400>, <0x30000000 0x10000000>;
+			reg-names = "qspi_base", "qspi_mmap";
+			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(43)>,
+			       <&dma0 AT91_XDMAC_DT_PERID(42)>;
+			dma-names = "tx", "rx";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 79>, <&pmc PMC_TYPE_GCK 79>;
+			clock-names = "pclk", "gclk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		adc: adc@e1000000 {
 			compatible = "microchip,sama7g5-adc";
 			reg = <0xe1000000 0x200>;
diff --git a/dts/src/arm/spear1310-evb.dts b/dts/src/arm/spear1310-evb.dts
index 8fcb6be6e7..4cbadcb410 100644
--- a/dts/src/arm/spear1310-evb.dts
+++ b/dts/src/arm/spear1310-evb.dts
@@ -395,22 +395,6 @@
 					pl022,wait-state = <0>;
 					pl022,duplex = <0>;
 				};
-
-				spidev@2 {
-					compatible = "spidev";
-					reg = <2>;
-					spi-max-frequency = <25000000>;
-					spi-cpha;
-					pl022,hierarchy = <0>;
-					pl022,interface = <0>;
-					pl022,slave-tx-disable;
-					pl022,com-mode = <0x2>;
-					pl022,rx-level-trig = <0>;
-					pl022,tx-level-trig = <0>;
-					pl022,ctrl-len = <0x11>;
-					pl022,wait-state = <0>;
-					pl022,duplex = <0>;
-				};
 			};
 
 			wdt@ec800620 {
diff --git a/dts/src/arm/spear1340-evb.dts b/dts/src/arm/spear1340-evb.dts
index f70ff56d45..fd194ebeed 100644
--- a/dts/src/arm/spear1340-evb.dts
+++ b/dts/src/arm/spear1340-evb.dts
@@ -489,22 +489,6 @@
 						ts,i-drive = <1>;
 					};
 				};
-
-				spidev@2 {
-					compatible = "spidev";
-					reg = <2>;
-					spi-max-frequency = <25000000>;
-					spi-cpha;
-					pl022,hierarchy = <0>;
-					pl022,interface = <0>;
-					pl022,slave-tx-disable;
-					pl022,com-mode = <0x2>;
-					pl022,rx-level-trig = <0>;
-					pl022,tx-level-trig = <0>;
-					pl022,ctrl-len = <0x11>;
-					pl022,wait-state = <0>;
-					pl022,duplex = <0>;
-				};
 			};
 
 			timer@ec800600 {
diff --git a/dts/src/arm/spear310.dtsi b/dts/src/arm/spear310.dtsi
index 8ce751a137..77570833d4 100644
--- a/dts/src/arm/spear310.dtsi
+++ b/dts/src/arm/spear310.dtsi
@@ -92,6 +92,7 @@
 			gpiopinctrl: gpio@b4000000 {
 				compatible = "st,spear-plgpio";
 				reg = <0xb4000000 0x1000>;
+				regmap = <&pinmux>;
 				#interrupt-cells = <1>;
 				interrupt-controller;
 				gpio-controller;
diff --git a/dts/src/arm/spear320.dtsi b/dts/src/arm/spear320.dtsi
index 3bc1e93a0a..47ac4474ed 100644
--- a/dts/src/arm/spear320.dtsi
+++ b/dts/src/arm/spear320.dtsi
@@ -120,6 +120,7 @@
 			gpiopinctrl: gpio@b3000000 {
 				compatible = "st,spear-plgpio";
 				reg = <0xb3000000 0x1000>;
+				regmap = <&pinmux>;
 				#interrupt-cells = <1>;
 				interrupt-controller;
 				gpio-controller;
diff --git a/dts/src/arm/spear320s.dtsi b/dts/src/arm/spear320s.dtsi
new file mode 100644
index 0000000000..133236dc19
--- /dev/null
+++ b/dts/src/arm/spear320s.dtsi
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * DTS file for SPEAr320s SoC
+ *
+ * Copyright 2021 Herve Codina <herve.codina@bootlin.com>
+ */
+
+/include/ "spear320.dtsi"
+
+/ {
+	ahb {
+		apb {
+			gpiopinctrl: gpio@b3000000 {
+				/*
+				 * The "RM0321 SPEAr320s address and map
+				 * registers" document mentions interrupt 6
+				 * (NPGIO_INTR) for the PL_GPIO interrupt.
+				 */
+				interrupts = <6>;
+				interrupt-parent = <&shirq>;
+			};
+		};
+	};
+};
diff --git a/dts/src/arm/ste-dbx5x0.dtsi b/dts/src/arm/ste-dbx5x0.dtsi
index 68607e4ad8..dc0bcc7020 100644
--- a/dts/src/arm/ste-dbx5x0.dtsi
+++ b/dts/src/arm/ste-dbx5x0.dtsi
@@ -5,6 +5,7 @@
 
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset/stericsson,db8500-prcc-reset.h>
 #include <dt-bindings/mfd/dbx500-prcmu.h>
 #include <dt-bindings/arm/ux500_pm_domains.h>
 #include <dt-bindings/gpio/gpio.h>
@@ -300,6 +301,10 @@
 				#clock-cells = <2>;
 			};
 
+			prcc_reset: prcc-reset-controller {
+				#reset-cells = <2>;
+			};
+
 			rtc_clk: rtc32k-clock {
 				#clock-cells = <0>;
 			};
@@ -662,6 +667,7 @@
 			clocks = <&prcc_kclk 3 3>, <&prcc_pclk 3 3>;
 			clock-names = "i2cclk", "apb_pclk";
 			power-domains = <&pm_domains DOMAIN_VAPE>;
+			resets = <&prcc_reset DB8500_PRCC_3 DB8500_PRCC_3_RESET_I2C0>;
 
 			status = "disabled";
 		};
@@ -680,6 +686,7 @@
 			clocks = <&prcc_kclk 1 2>, <&prcc_pclk 1 2>;
 			clock-names = "i2cclk", "apb_pclk";
 			power-domains = <&pm_domains DOMAIN_VAPE>;
+			resets = <&prcc_reset DB8500_PRCC_1 DB8500_PRCC_1_RESET_I2C1>;
 
 			status = "disabled";
 		};
@@ -698,6 +705,7 @@
 			clocks = <&prcc_kclk 1 6>, <&prcc_pclk 1 6>;
 			clock-names = "i2cclk", "apb_pclk";
 			power-domains = <&pm_domains DOMAIN_VAPE>;
+			resets = <&prcc_reset DB8500_PRCC_1 DB8500_PRCC_1_RESET_I2C2>;
 
 			status = "disabled";
 		};
@@ -716,6 +724,7 @@
 			clocks = <&prcc_kclk 2 0>, <&prcc_pclk 2 0>;
 			clock-names = "i2cclk", "apb_pclk";
 			power-domains = <&pm_domains DOMAIN_VAPE>;
+			resets = <&prcc_reset DB8500_PRCC_2 DB8500_PRCC_2_RESET_I2C3>;
 
 			status = "disabled";
 		};
@@ -734,6 +743,7 @@
 			clocks = <&prcc_kclk 1 9>, <&prcc_pclk 1 10>;
 			clock-names = "i2cclk", "apb_pclk";
 			power-domains = <&pm_domains DOMAIN_VAPE>;
+			resets = <&prcc_reset DB8500_PRCC_1 DB8500_PRCC_1_RESET_I2C4>;
 
 			status = "disabled";
 		};
@@ -750,6 +760,7 @@
 			       <&dma 8 0 0x0>; /* Logical - MemToDev */
 			dma-names = "rx", "tx";
 			power-domains = <&pm_domains DOMAIN_VAPE>;
+			resets = <&prcc_reset DB8500_PRCC_3 DB8500_PRCC_3_RESET_SSP0>;
 
 			status = "disabled";
 		};
@@ -766,6 +777,7 @@
 			       <&dma 9 0 0x0>; /* Logical - MemToDev */
 			dma-names = "rx", "tx";
 			power-domains = <&pm_domains DOMAIN_VAPE>;
+			resets = <&prcc_reset DB8500_PRCC_3 DB8500_PRCC_3_RESET_SSP1>;
 
 			status = "disabled";
 		};
@@ -834,6 +846,7 @@
 			       <&dma 40 0 0x0>; /* Logical - MemToDev */
 			dma-names = "rx", "tx";
 			power-domains = <&pm_domains DOMAIN_VAPE>;
+			resets = <&prcc_reset DB8500_PRCC_1 DB8500_PRCC_1_RESET_SPI3>;
 
 			status = "disabled";
 		};
@@ -849,6 +862,7 @@
 
 			clocks = <&prcc_kclk 1 0>, <&prcc_pclk 1 0>;
 			clock-names = "uart", "apb_pclk";
+			resets = <&prcc_reset DB8500_PRCC_1 DB8500_PRCC_1_RESET_UART0>;
 
 			status = "disabled";
 		};
@@ -864,6 +878,7 @@
 
 			clocks = <&prcc_kclk 1 1>, <&prcc_pclk 1 1>;
 			clock-names = "uart", "apb_pclk";
+			resets = <&prcc_reset DB8500_PRCC_1 DB8500_PRCC_1_RESET_UART1>;
 
 			status = "disabled";
 		};
@@ -879,6 +894,7 @@
 
 			clocks = <&prcc_kclk 3 6>, <&prcc_pclk 3 6>;
 			clock-names = "uart", "apb_pclk";
+			resets = <&prcc_reset DB8500_PRCC_3 DB8500_PRCC_3_RESET_UART2>;
 
 			status = "disabled";
 		};
@@ -895,6 +911,7 @@
 			clocks = <&prcc_kclk 1 5>, <&prcc_pclk 1 5>;
 			clock-names = "sdi", "apb_pclk";
 			power-domains = <&pm_domains DOMAIN_VAPE>;
+			resets = <&prcc_reset DB8500_PRCC_1 DB8500_PRCC_1_RESET_SDI0>;
 
 			status = "disabled";
 		};
@@ -911,6 +928,7 @@
 			clocks = <&prcc_kclk 2 4>, <&prcc_pclk 2 6>;
 			clock-names = "sdi", "apb_pclk";
 			power-domains = <&pm_domains DOMAIN_VAPE>;
+			resets = <&prcc_reset DB8500_PRCC_2 DB8500_PRCC_2_RESET_SDI1>;
 
 			status = "disabled";
 		};
@@ -927,6 +945,7 @@
 			clocks = <&prcc_kclk 3 4>, <&prcc_pclk 3 4>;
 			clock-names = "sdi", "apb_pclk";
 			power-domains = <&pm_domains DOMAIN_VAPE>;
+			resets = <&prcc_reset DB8500_PRCC_3 DB8500_PRCC_3_RESET_SDI2>;
 
 			status = "disabled";
 		};
@@ -943,6 +962,7 @@
 			clocks = <&prcc_kclk 2 5>, <&prcc_pclk 2 7>;
 			clock-names = "sdi", "apb_pclk";
 			power-domains = <&pm_domains DOMAIN_VAPE>;
+			resets = <&prcc_reset DB8500_PRCC_2 DB8500_PRCC_2_RESET_SDI3>;
 
 			status = "disabled";
 		};
@@ -959,6 +979,7 @@
 			clocks = <&prcc_kclk 2 2>, <&prcc_pclk 2 4>;
 			clock-names = "sdi", "apb_pclk";
 			power-domains = <&pm_domains DOMAIN_VAPE>;
+			resets = <&prcc_reset DB8500_PRCC_2 DB8500_PRCC_2_RESET_SDI4>;
 
 			status = "disabled";
 		};
@@ -975,6 +996,7 @@
 			clocks = <&prcc_kclk 3 7>, <&prcc_pclk 3 7>;
 			clock-names = "sdi", "apb_pclk";
 			power-domains = <&pm_domains DOMAIN_VAPE>;
+			resets = <&prcc_reset DB8500_PRCC_3 DB8500_PRCC_3_RESET_SDI5>;
 
 			status = "disabled";
 		};
@@ -996,6 +1018,7 @@
 
 			clocks = <&prcc_kclk 1 3>, <&prcc_pclk 1 3>;
 			clock-names = "msp", "apb_pclk";
+			resets = <&prcc_reset DB8500_PRCC_1 DB8500_PRCC_1_RESET_MSP0>;
 
 			status = "disabled";
 		};
@@ -1012,6 +1035,7 @@
 
 			clocks = <&prcc_kclk 1 4>, <&prcc_pclk 1 4>;
 			clock-names = "msp", "apb_pclk";
+			resets = <&prcc_reset DB8500_PRCC_1 DB8500_PRCC_1_RESET_MSP1>;
 
 			status = "disabled";
 		};
@@ -1030,6 +1054,7 @@
 
 			clocks = <&prcc_kclk 2 3>, <&prcc_pclk 2 5>;
 			clock-names = "msp", "apb_pclk";
+			resets = <&prcc_reset DB8500_PRCC_2 DB8500_PRCC_2_RESET_MSP2>;
 
 			status = "disabled";
 		};
@@ -1046,6 +1071,7 @@
 
 			clocks = <&prcc_kclk 1 10>, <&prcc_pclk 1 11>;
 			clock-names = "msp", "apb_pclk";
+			resets = <&prcc_reset DB8500_PRCC_1 DB8500_PRCC_1_RESET_MSP3>;
 
 			status = "disabled";
 		};
diff --git a/dts/src/arm/ste-ux500-samsung-gavini.dts b/dts/src/arm/ste-ux500-samsung-gavini.dts
index 47bbf5ab26..1c0e5cfedd 100644
--- a/dts/src/arm/ste-ux500-samsung-gavini.dts
+++ b/dts/src/arm/ste-ux500-samsung-gavini.dts
@@ -232,19 +232,18 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		/* TODO: Memsic MMC328 magnetometer */
-		magnetometer@30 {
-			compatible = "memsic,mmc328";
-			reg = <0x30>;
-			/* TODO: if you have the schematic, check if both voltages come from AUX2 */
-			/* VDA 1.8 V */
-			vda-supply = <&ab8500_ldo_aux2_reg>;
-			/* VDD 1.8V */
-			vdd-supply = <&ab8500_ldo_aux2_reg>;
-			/* GPIO204 */
+		/* Yamaha YAS530 magnetometer */
+		magnetometer@2e {
+			compatible = "yamaha,yas530";
+			reg = <0x2e>;
+			/* VDD 3V */
+			vdd-supply = <&ab8500_ldo_aux1_reg>;
+			/* IOVDD 1.8V */
+			iovdd-supply = <&ab8500_ldo_aux2_reg>;
+			/* GPIO204 COMPASS_RST_N */
 			reset-gpios = <&gpio6 12 GPIO_ACTIVE_LOW>;
 			pinctrl-names = "default";
-			pinctrl-0 = <&mmc328_default>;
+			pinctrl-0 = <&yas530_default>;
 		};
 		/* TODO: this should also be used by the NCP6914 Camera power management unit */
 	};
@@ -645,6 +644,15 @@
 			};
 		};
 	};
+	/* Reset line for the Yamaha YAS530 magnetometer */
+	yas530 {
+		yas530_default: yas530_janice {
+			janice_cfg1 {
+				pins = "GPIO204_AF23";
+				ste,config = <&gpio_out_hi>;
+			};
+		};
+	};
 	/* Flash and torch */
 	flash {
 		gpio_flash_default_mode: flash_default {
@@ -747,15 +755,6 @@
 			};
 		};
 	};
-	/* Reset line for the Memsic MMC328 magnetometer */
-	mmc328 {
-		mmc328_default: mmc328_gavini {
-			gavini_cfg1 {
-				pins = "GPIO204_AF23";
-				ste,config = <&gpio_out_hi>;
-			};
-		};
-	};
 	/* Interrupt line for Invensense MPU3050 gyroscope */
 	mpu3050 {
 		mpu3050_default: mpu3050 {
diff --git a/dts/src/arm/stm32f429-disco.dts b/dts/src/arm/stm32f429-disco.dts
index 075ac57d0b..6435e099c6 100644
--- a/dts/src/arm/stm32f429-disco.dts
+++ b/dts/src/arm/stm32f429-disco.dts
@@ -192,7 +192,7 @@
 
 	display: display@1{
 		/* Connect panel-ilitek-9341 to ltdc */
-		compatible = "st,sf-tc240t-9370-t";
+		compatible = "st,sf-tc240t-9370-t", "ilitek,ili9341";
 		reg = <1>;
 		spi-3wire;
 		spi-max-frequency = <10000000>;
diff --git a/dts/src/arm/stm32mp15-pinctrl.dtsi b/dts/src/arm/stm32mp15-pinctrl.dtsi
index 2ebafe27a8..3b65130aff 100644
--- a/dts/src/arm/stm32mp15-pinctrl.dtsi
+++ b/dts/src/arm/stm32mp15-pinctrl.dtsi
@@ -1718,7 +1718,7 @@
 
 	stusb1600_pins_a: stusb1600-0 {
 		pins {
-			pinmux = <STM32_PINMUX('I', 11, ANALOG)>;
+			pinmux = <STM32_PINMUX('I', 11, GPIO)>;
 			bias-pull-up;
 		};
 	};
@@ -1737,20 +1737,20 @@
 	};
 
 	uart4_idle_pins_a: uart4-idle-0 {
-		   pins1 {
-			 pinmux = <STM32_PINMUX('G', 11, ANALOG)>; /* UART4_TX */
-		   };
-		   pins2 {
-			 pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
-			 bias-disable;
-		   };
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 11, ANALOG)>; /* UART4_TX */
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
+			bias-disable;
+		};
 	};
 
 	uart4_sleep_pins_a: uart4-sleep-0 {
-		   pins {
+		pins {
 			pinmux = <STM32_PINMUX('G', 11, ANALOG)>, /* UART4_TX */
 				 <STM32_PINMUX('B', 2, ANALOG)>; /* UART4_RX */
-		    };
+		};
 	};
 
 	uart4_pins_b: uart4-1 {
@@ -1816,7 +1816,7 @@
 		};
 		pins2 {
 			pinmux = <STM32_PINMUX('E', 7, AF7)>; /* UART7_RX */
-			bias-disable;
+			bias-pull-up;
 		};
 	};
 
@@ -1826,7 +1826,7 @@
 		};
 		pins2 {
 			pinmux = <STM32_PINMUX('E', 7, AF7)>; /* UART7_RX */
-			bias-disable;
+			bias-pull-up;
 		};
 	};
 
@@ -1971,7 +1971,7 @@
 		pins2 {
 			pinmux = <STM32_PINMUX('B', 12, AF8)>, /* USART3_RX */
 				 <STM32_PINMUX('I', 10, AF8)>; /* USART3_CTS_NSS */
-			bias-disable;
+			bias-pull-up;
 		};
 	};
 
@@ -1988,7 +1988,7 @@
 		};
 		pins3 {
 			pinmux = <STM32_PINMUX('B', 12, AF8)>; /* USART3_RX */
-			bias-disable;
+			bias-pull-up;
 		};
 	};
 
@@ -2012,7 +2012,7 @@
 		pins2 {
 			pinmux = <STM32_PINMUX('B', 12, AF8)>, /* USART3_RX */
 				 <STM32_PINMUX('B', 13, AF7)>; /* USART3_CTS_NSS */
-			bias-disable;
+			bias-pull-up;
 		};
 	};
 
@@ -2029,7 +2029,7 @@
 		};
 		pins3 {
 			pinmux = <STM32_PINMUX('B', 12, AF8)>; /* USART3_RX */
-			bias-disable;
+			bias-pull-up;
 		};
 	};
 
diff --git a/dts/src/arm/stm32mp157a-icore-stm32mp1-ctouch2-of10.dts b/dts/src/arm/stm32mp157a-icore-stm32mp1-ctouch2-of10.dts
new file mode 100644
index 0000000000..2a28292834
--- /dev/null
+++ b/dts/src/arm/stm32mp157a-icore-stm32mp1-ctouch2-of10.dts
@@ -0,0 +1,132 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (c) STMicroelectronics 2019 - All Rights Reserved
+ * Copyright (c) 2020 Engicam srl
+ * Copyright (c) 2020 Amarula Solutons(India)
+ */
+
+/dts-v1/;
+#include "stm32mp157.dtsi"
+#include "stm32mp157a-icore-stm32mp1.dtsi"
+#include "stm32mp15-pinctrl.dtsi"
+#include "stm32mp15xxaa-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Engicam i.Core STM32MP1 C.TOUCH 2.0 10.1\" Open Frame";
+	compatible = "engicam,icore-stm32mp1-ctouch2-of10",
+		     "engicam,icore-stm32mp1", "st,stm32mp157";
+
+	aliases {
+		serial0 = &uart4;
+	};
+
+	backlight: backlight {
+		compatible = "gpio-backlight";
+		gpios = <&gpiod 13 GPIO_ACTIVE_HIGH>;
+		default-on;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	panel {
+		compatible = "ampire,am-1280800n3tzqw-t00h";
+		backlight = <&backlight>;
+		power-supply = <&v3v3>;
+
+		port {
+			panel_in_lvds: endpoint {
+				remote-endpoint = <&bridge_out>;
+			};
+		};
+	};
+};
+
+&dsi {
+	status = "okay";
+	phy-dsi-supply = <&reg18>;
+
+	ports {
+		port@0 {
+			reg = <0>;
+			dsi_in: endpoint {
+				remote-endpoint = <&ltdc_ep0_out>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			dsi_out: endpoint {
+				remote-endpoint = <&bridge_in>;
+			};
+		};
+	};
+};
+
+&i2c6 {
+	i2c-scl-falling-time-ns = <20>;
+	i2c-scl-rising-time-ns = <185>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2c6_pins_a>;
+	pinctrl-1 = <&i2c6_sleep_pins_a>;
+	status = "okay";
+
+	bridge@2c {
+		compatible = "ti,sn65dsi84";
+		reg = <0x2c>;
+		enable-gpios = <&gpiof 15 GPIO_ACTIVE_HIGH>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				bridge_in: endpoint {
+					remote-endpoint = <&dsi_out>;
+					data-lanes = <1 2>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+				bridge_out: endpoint {
+					remote-endpoint = <&panel_in_lvds>;
+				};
+			};
+		};
+	};
+};
+
+&ltdc {
+	status = "okay";
+
+	port {
+		ltdc_ep0_out: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&dsi_in>;
+		};
+	};
+};
+
+&sdmmc1 {
+	bus-width = <4>;
+	disable-wp;
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc1_b4_pins_a>;
+	pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
+	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
+	st,neg-edge;
+	vmmc-supply = <&v3v3>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default", "sleep", "idle";
+	pinctrl-0 = <&uart4_pins_a>;
+	pinctrl-1 = <&uart4_sleep_pins_a>;
+	pinctrl-2 = <&uart4_idle_pins_a>;
+	status = "okay";
+};
diff --git a/dts/src/arm/stm32mp157a-icore-stm32mp1-edimm2.2.dts b/dts/src/arm/stm32mp157a-icore-stm32mp1-edimm2.2.dts
index ec9f1d1cd5..a797eaa917 100644
--- a/dts/src/arm/stm32mp157a-icore-stm32mp1-edimm2.2.dts
+++ b/dts/src/arm/stm32mp157a-icore-stm32mp1-edimm2.2.dts
@@ -24,6 +24,91 @@
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
+
+	backlight: backlight {
+		compatible = "gpio-backlight";
+		gpios = <&gpiod 13 GPIO_ACTIVE_HIGH>;
+		default-on;
+	};
+
+	panel {
+		compatible = "yes-optoelectronics,ytc700tlag-05-201c";
+		backlight = <&backlight>;
+		power-supply = <&v3v3>;
+
+		port {
+			panel_out_bridge: endpoint {
+				remote-endpoint = <&bridge_out_panel>;
+			};
+		};
+	};
+};
+
+&dsi {
+	status = "okay";
+	phy-dsi-supply = <&reg18>;
+
+	ports {
+		port@0 {
+			reg = <0>;
+			dsi_in_ltdc: endpoint {
+				remote-endpoint = <&ltdc_out_dsi>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			dsi_out_bridge: endpoint {
+				remote-endpoint = <&bridge_in_dsi>;
+			};
+		};
+	};
+};
+
+&i2c6 {
+	i2c-scl-falling-time-ns = <20>;
+	i2c-scl-rising-time-ns = <185>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2c6_pins_a>;
+	pinctrl-1 = <&i2c6_sleep_pins_a>;
+	status = "okay";
+
+	bridge@2c {
+		compatible = "ti,sn65dsi84";
+		reg = <0x2c>;
+		enable-gpios = <&gpiof 15 GPIO_ACTIVE_HIGH>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				bridge_in_dsi: endpoint {
+					remote-endpoint = <&dsi_out_bridge>;
+					data-lanes = <1 2>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+				bridge_out_panel: endpoint {
+					remote-endpoint = <&panel_out_bridge>;
+				};
+			};
+		};
+	};
+};
+
+&ltdc {
+	status = "okay";
+
+	port {
+		ltdc_out_dsi: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&dsi_in_ltdc>;
+		};
+	};
 };
 
 &sdmmc1 {
diff --git a/dts/src/arm/stm32mp157c-ev1.dts b/dts/src/arm/stm32mp157c-ev1.dts
index 5c5b1ddf7b..e222d2d2cb 100644
--- a/dts/src/arm/stm32mp157c-ev1.dts
+++ b/dts/src/arm/stm32mp157c-ev1.dts
@@ -375,3 +375,25 @@
 &usbphyc {
 	status = "okay";
 };
+
+&usbphyc_port0 {
+	st,tune-hs-dc-level = <2>;
+	st,enable-fs-rftime-tuning;
+	st,enable-hs-rftime-reduction;
+	st,trim-hs-current = <15>;
+	st,trim-hs-impedance = <1>;
+	st,tune-squelch-level = <3>;
+	st,tune-hs-rx-offset = <2>;
+	st,no-lsfs-sc;
+};
+
+&usbphyc_port1 {
+	st,tune-hs-dc-level = <2>;
+	st,enable-fs-rftime-tuning;
+	st,enable-hs-rftime-reduction;
+	st,trim-hs-current = <15>;
+	st,trim-hs-impedance = <1>;
+	st,tune-squelch-level = <3>;
+	st,tune-hs-rx-offset = <2>;
+	st,no-lsfs-sc;
+};
diff --git a/dts/src/arm/stm32mp15xx-dkx.dtsi b/dts/src/arm/stm32mp15xx-dkx.dtsi
index 48beed0f1f..6caeb448c1 100644
--- a/dts/src/arm/stm32mp15xx-dkx.dtsi
+++ b/dts/src/arm/stm32mp15xx-dkx.dtsi
@@ -694,10 +694,26 @@
 
 &usbphyc_port0 {
 	phy-supply = <&vdd_usb>;
+	st,tune-hs-dc-level = <2>;
+	st,enable-fs-rftime-tuning;
+	st,enable-hs-rftime-reduction;
+	st,trim-hs-current = <15>;
+	st,trim-hs-impedance = <1>;
+	st,tune-squelch-level = <3>;
+	st,tune-hs-rx-offset = <2>;
+	st,no-lsfs-sc;
 };
 
 &usbphyc_port1 {
 	phy-supply = <&vdd_usb>;
+	st,tune-hs-dc-level = <2>;
+	st,enable-fs-rftime-tuning;
+	st,enable-hs-rftime-reduction;
+	st,trim-hs-current = <15>;
+	st,trim-hs-impedance = <1>;
+	st,tune-squelch-level = <3>;
+	st,tune-hs-rx-offset = <2>;
+	st,no-lsfs-sc;
 };
 
 &vrefbuf {
diff --git a/dts/src/arm/sun8i-h2-plus-bananapi-m2-zero.dts b/dts/src/arm/sun8i-h2-plus-bananapi-m2-zero.dts
index 8e8634ff2f..d5c7b7984d 100644
--- a/dts/src/arm/sun8i-h2-plus-bananapi-m2-zero.dts
+++ b/dts/src/arm/sun8i-h2-plus-bananapi-m2-zero.dts
@@ -52,8 +52,9 @@
 
 		sw4 {
 			label = "power";
-			linux,code = <BTN_0>;
+			linux,code = <KEY_POWER>;
 			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+			wakeup-source;
 		};
 	};
 
diff --git a/dts/src/arm/sun8i-h3-beelink-x2.dts b/dts/src/arm/sun8i-h3-beelink-x2.dts
index f0e591e1c7..cd9f655e4f 100644
--- a/dts/src/arm/sun8i-h3-beelink-x2.dts
+++ b/dts/src/arm/sun8i-h3-beelink-x2.dts
@@ -57,6 +57,12 @@
 		ethernet1 = &sdiowifi;
 	};
 
+	cec-gpio {
+		compatible = "cec-gpio";
+		cec-gpios = <&pio 0 14 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; /* PA14 */
+		hdmi-phandle = <&hdmi>;
+	};
+
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
@@ -87,11 +93,15 @@
 		};
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
-		clocks = <&rtc 1>;
-		clock-names = "ext_clock";
+	r-gpio-keys {
+		compatible = "gpio-keys";
+
+		power {
+			label = "power";
+			linux,code = <KEY_POWER>;
+			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
 	};
 
 	sound_spdif {
@@ -112,15 +122,11 @@
 		compatible = "linux,spdif-dit";
 	};
 
-	r-gpio-keys {
-		compatible = "gpio-keys";
-
-		power {
-			label = "power";
-			linux,code = <KEY_POWER>;
-			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
-			wakeup-source;
-		};
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
+		clocks = <&rtc 1>;
+		clock-names = "ext_clock";
 	};
 };
 
diff --git a/dts/src/arm/sun8i-h3-nanopi.dtsi b/dts/src/arm/sun8i-h3-nanopi.dtsi
index c7c3e7d8b3..fc45d5aaa6 100644
--- a/dts/src/arm/sun8i-h3-nanopi.dtsi
+++ b/dts/src/arm/sun8i-h3-nanopi.dtsi
@@ -81,6 +81,7 @@
 			label = "k1";
 			linux,code = <KEY_POWER>;
 			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+			wakeup-source;
 		};
 	};
 };
diff --git a/dts/src/arm/sun8i-h3-orangepi-2.dts b/dts/src/arm/sun8i-h3-orangepi-2.dts
index 597c425d08..9daffd90c1 100644
--- a/dts/src/arm/sun8i-h3-orangepi-2.dts
+++ b/dts/src/arm/sun8i-h3-orangepi-2.dts
@@ -99,8 +99,9 @@
 
 		sw4 {
 			label = "sw4";
-			linux,code = <BTN_0>;
+			linux,code = <KEY_POWER>;
 			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+			wakeup-source;
 		};
 	};
 
diff --git a/dts/src/arm/sun8i-h3-orangepi-pc.dts b/dts/src/arm/sun8i-h3-orangepi-pc.dts
index 5aff8ecc66..90f75fa85e 100644
--- a/dts/src/arm/sun8i-h3-orangepi-pc.dts
+++ b/dts/src/arm/sun8i-h3-orangepi-pc.dts
@@ -91,8 +91,9 @@
 
 		sw4 {
 			label = "sw4";
-			linux,code = <BTN_0>;
+			linux,code = <KEY_POWER>;
 			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+			wakeup-source;
 		};
 	};
 };
diff --git a/dts/src/arm/sun8i-h3.dtsi b/dts/src/arm/sun8i-h3.dtsi
index ae4f933abb..845f252354 100644
--- a/dts/src/arm/sun8i-h3.dtsi
+++ b/dts/src/arm/sun8i-h3.dtsi
@@ -282,6 +282,10 @@
 	compatible = "allwinner,sun8i-h3-de2-clk";
 };
 
+&mbus {
+	compatible = "allwinner,sun8i-h3-mbus";
+};
+
 &mmc0 {
 	compatible = "allwinner,sun7i-a20-mmc";
 	clocks = <&ccu CLK_BUS_MMC0>,
diff --git a/dts/src/arm/sun8i-r40.dtsi b/dts/src/arm/sun8i-r40.dtsi
index 1d87fc0c24..03d3e5f45a 100644
--- a/dts/src/arm/sun8i-r40.dtsi
+++ b/dts/src/arm/sun8i-r40.dtsi
@@ -511,6 +511,16 @@
 			#interrupt-cells = <3>;
 			#gpio-cells = <3>;
 
+			can_ph_pins: can-ph-pins {
+				pins = "PH20", "PH21";
+				function = "can";
+			};
+
+			can_pa_pins: can-pa-pins {
+				pins = "PA16", "PA17";
+				function = "can";
+			};
+
 			clk_out_a_pin: clk-out-a-pin {
 				pins = "PI12";
 				function = "clk_out_a";
@@ -926,6 +936,15 @@
 			#size-cells = <0>;
 		};
 
+		can0: can@1c2bc00 {
+			compatible = "allwinner,sun8i-r40-can";
+			reg = <0x01c2bc00 0x400>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CAN>;
+			resets = <&ccu RST_BUS_CAN>;
+			status = "disabled";
+		};
+
 		i2c4: i2c@1c2c000 {
 			compatible = "allwinner,sun6i-a31-i2c";
 			reg = <0x01c2c000 0x400>;
@@ -1212,8 +1231,8 @@
 			reg-io-width = <1>;
 			interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_HDMI0>, <&ccu CLK_HDMI_SLOW>,
-				 <&ccu CLK_HDMI>;
-			clock-names = "iahb", "isfr", "tmds";
+				 <&ccu CLK_HDMI>, <&rtc 0>;
+			clock-names = "iahb", "isfr", "tmds", "cec";
 			resets = <&ccu RST_BUS_HDMI1>;
 			reset-names = "ctrl";
 			phys = <&hdmi_phy>;
diff --git a/dts/src/arm/sunxi-bananapi-m2-plus.dtsi b/dts/src/arm/sunxi-bananapi-m2-plus.dtsi
index 7a6af54dd3..d03f5853ef 100644
--- a/dts/src/arm/sunxi-bananapi-m2-plus.dtsi
+++ b/dts/src/arm/sunxi-bananapi-m2-plus.dtsi
@@ -82,8 +82,9 @@
 
 		sw4 {
 			label = "power";
-			linux,code = <BTN_0>;
+			linux,code = <KEY_POWER>;
 			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+			wakeup-source;
 		};
 	};
 
diff --git a/dts/src/arm/sunxi-h3-h5.dtsi b/dts/src/arm/sunxi-h3-h5.dtsi
index c7428df946..4aeca9e7e3 100644
--- a/dts/src/arm/sunxi-h3-h5.dtsi
+++ b/dts/src/arm/sunxi-h3-h5.dtsi
@@ -568,9 +568,14 @@
 		};
 
 		mbus: dram-controller@1c62000 {
-			compatible = "allwinner,sun8i-h3-mbus";
-			reg = <0x01c62000 0x1000>;
-			clocks = <&ccu CLK_MBUS>;
+			/* compatible is in per SoC .dtsi file */
+			reg = <0x01c62000 0x1000>,
+			      <0x01c63000 0x1000>;
+			reg-names = "mbus", "dram";
+			clocks = <&ccu CLK_MBUS>,
+				 <&ccu CLK_DRAM>,
+				 <&ccu CLK_BUS_DRAM>;
+			clock-names = "mbus", "dram", "bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			dma-ranges = <0x00000000 0x40000000 0xc0000000>;
@@ -813,8 +818,8 @@
 			reg-io-width = <1>;
 			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>,
-				 <&ccu CLK_HDMI>;
-			clock-names = "iahb", "isfr", "tmds";
+				 <&ccu CLK_HDMI>, <&rtc 0>;
+			clock-names = "iahb", "isfr", "tmds", "cec";
 			resets = <&ccu RST_BUS_HDMI1>;
 			reset-names = "ctrl";
 			phys = <&hdmi_phy>;
diff --git a/dts/src/arm/sunxi-libretech-all-h3-cc.dtsi b/dts/src/arm/sunxi-libretech-all-h3-cc.dtsi
index c44fd72694..9e14fe5fdc 100644
--- a/dts/src/arm/sunxi-libretech-all-h3-cc.dtsi
+++ b/dts/src/arm/sunxi-libretech-all-h3-cc.dtsi
@@ -49,6 +49,7 @@
 			label = "power";
 			linux,code = <KEY_POWER>;
 			gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
+			wakeup-source;
 		};
 	};
 
diff --git a/dts/src/arm/tegra114-asus-tf701t.dts b/dts/src/arm/tegra114-asus-tf701t.dts
new file mode 100644
index 0000000000..b791ce9742
--- /dev/null
+++ b/dts/src/arm/tegra114-asus-tf701t.dts
@@ -0,0 +1,807 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/dts-v1/;
+
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+
+#include "tegra114.dtsi"
+
+/ {
+	model = "Asus Transformer Pad TF701T";
+	compatible = "asus,tf701t", "nvidia,tegra114";
+	chassis-type = "convertible";
+
+	aliases {
+		mmc0 = "/mmc@78000600"; /* eMMC */
+		mmc1 = "/mmc@78000400"; /* uSD slot */
+		mmc2 = "/mmc@78000000"; /* WiFi */
+
+		rtc0 = &palmas;
+		rtc1 = "/rtc@7000e000";
+
+		serial0 = &uartd; /* Console */
+		serial1 = &uartc; /* Bluetooth */
+		serial2 = &uartb; /* GPS */
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x80000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		linux,cma@80000000 {
+			compatible = "shared-dma-pool";
+			alloc-ranges = <0x80000000 0x30000000>;
+			size = <0x10000000>;
+			linux,cma-default;
+			reusable;
+		};
+
+		trustzone@bfe00000 {
+			reg = <0xbfe00000 0x200000>;
+			no-map;
+		};
+	};
+
+	host1x@50000000 {
+		dsi@54300000 {
+			status = "okay";
+
+			avdd-dsi-csi-supply = <&tps65913_ldo2>;
+
+			nvidia,ganged-mode = <&dsib>;
+
+			panel_primary: panel@0 {
+				compatible = "sharp,lq101r1sx01";
+				reg = <0>;
+
+				link2 = <&panel_secondary>;
+
+				power-supply = <&vdd_lcd>;
+				backlight = <&backlight>;
+			};
+		};
+
+		dsi@54400000 {
+			status = "okay";
+
+			avdd-dsi-csi-supply = <&tps65913_ldo2>;
+
+			panel_secondary: panel@0 {
+				compatible = "sharp,lq101r1sx01";
+				reg = <0>;
+			};
+		};
+	};
+
+	pinmux@70000868 {
+		asus_pad_ec_default: asus-pad-ec-default {
+			ec-interrupt {
+				nvidia,pins = "kb_col5_pq5";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			ec-request {
+				nvidia,pins = "kb_col2_pq2";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+		};
+
+		backlight_default: backlight-default {
+			backlight-enable {
+				nvidia,pins = "gmi_ad10_ph2";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+		};
+
+		codec_default: codec-default {
+			ldo1-en {
+				nvidia,pins = "sdmmc1_wp_n_pv3";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			interrupt {
+				nvidia,pins = "gpio_w2_aud_pw2",
+						"gpio_w3_aud_pw3";
+				nvidia,function = "spi6";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+		};
+
+		gpio_keys_default: gpio-keys-default {
+			power {
+				nvidia,pins = "kb_col0_pq0";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			volume {
+				nvidia,pins = "kb_row1_pr1",
+						"kb_row2_pr2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+		};
+
+		gpio_hall_sensor_default: gpio-hall-sensor-default {
+			ulpi_data4_po5 {
+				nvidia,pins = "ulpi_data4_po5";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+		};
+
+		hp_det_default: hp-det-default {
+			gmi_iordy_pi5 {
+				nvidia,pins = "kb_row7_pr7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+		};
+
+		imu_default: imu-default {
+			kb_row3_pr3 {
+				nvidia,pins = "kb_row3_pr3";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+		};
+
+		pwm_default: pwm-default {
+			gmi_ad9_ph1 {
+				nvidia,pins = "gmi_ad9_ph1";
+				nvidia,function = "pwm1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+		};
+
+		/* XXX make this something more sensible */
+		pwm_sleep: pwm-sleep {
+			gmi_ad9_ph1 {
+				nvidia,pins = "gmi_ad9_ph1";
+				nvidia,function = "pwm1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+		};
+
+		sdmmc3_default: sdmmc3-default {
+			sdmmc3_clk_pa6 {
+				nvidia,pins = "sdmmc3_clk_pa6";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			sdmmc3_cmd_pa7 {
+				nvidia,pins = "sdmmc3_cmd_pa7",
+						"sdmmc3_dat0_pb7",
+						"sdmmc3_dat1_pb6",
+						"sdmmc3_dat2_pb5",
+						"sdmmc3_dat3_pb4",
+						"kb_col4_pq4",
+						"sdmmc3_clk_lb_out_pee4",
+						"sdmmc3_clk_lb_in_pee5",
+						"sdmmc3_cd_n_pv2";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			drive_sdio3 {
+				nvidia,pins = "drive_sdio3";
+				nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
+				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+				nvidia,pull-down-strength = <22>;
+				nvidia,pull-up-strength = <36>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+			};
+		};
+
+		sdmmc3_vdd_default: sdmmc3-vdd-default {
+			gmi_clk_pk1 {
+				nvidia,pins = "gmi_clk_pk1";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+		};
+
+		vdd_lcd_default: vdd-lcd-default {
+			sdmmc4_clk_pcc4 {
+				nvidia,pins = "sdmmc4_clk_pcc4";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+		};
+	};
+
+	serial@70006040 {
+		/* GPS */
+	};
+
+	serial@70006200 {
+		/* Bluetooth */
+	};
+
+	serial@70006300 {
+		status = "okay";
+	};
+
+	pwm@7000a000 {
+		status = "okay";
+
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&pwm_default>;
+		pinctrl-1 = <&pwm_sleep>;
+	};
+
+	i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <100000>;
+
+		magnetometer@c {
+			compatible = "asahi-kasei,ak09911";
+			reg = <0xc>;
+
+			vdd-supply = <&vdd_3v3_sys>;
+		};
+
+		rt5639: audio-codec@1c {
+			compatible = "realtek,rt5639";
+			reg = <0x1c>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_EDGE_FALLING>;
+
+			realtek,ldo1-en-gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&codec_default>;
+		};
+
+		motion-tracker@68 {
+			compatible = "invensense,mpu6500";
+			reg = <0x68>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(R, 3) IRQ_TYPE_LEVEL_HIGH>;
+
+			mount-matrix =  "0", "-1", "0",
+					"1",  "0", "0",
+					"0",  "0", "1";
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&imu_default>;
+		};
+
+		temp_sensor: temperature-sensor@4c {
+			compatible = "onnn,nct1008";
+			reg = <0x4c>;
+
+			vcc-supply = <&vdd_3v3_sys>;
+			#thermal-sensor-cells = <1>;
+		};
+	};
+
+	i2c@7000c400 {
+		status = "okay";
+		clock-frequency = <100000>;
+
+		power-sensor@44 {
+			compatible = "ti,ina230";
+			reg = <0x44>;
+		};
+	};
+
+	i2c@7000c500 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		light-sensor@1c {
+			compatible = "dynaimage,al3320a";
+			reg = <0x1c>;
+
+			vdd-supply = <&vdd_3v3_sys>;
+		};
+	};
+
+	i2c@7000c700 {
+		/* HDMI DDC */
+	};
+
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		palmas: pmic@58 {
+			compatible = "ti,tps65913", "ti,palmas";
+			reg = <0x58>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+
+			#interrupt-cells = <2>;
+			interrupt-controller;
+
+			ti,system-power-controller;
+
+			palmas_gpio: gpio {
+				compatible = "ti,palmas-gpio";
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			pmic {
+				compatible = "ti,tps65913-pmic", "ti,palmas-pmic";
+
+				ldo1-in-supply = <&tps65913_smps7>;
+				ldo2-in-supply = <&tps65913_smps7>;
+				ldo4-in-supply = <&tps65913_smps8>;
+				ldo5-in-supply = <&tps65913_smps9>;
+				ldo6-in-supply = <&tps65913_smps9>;
+				ldo7-in-supply = <&tps65913_smps9>;
+				ldo9-in-supply = <&tps65913_smps9>;
+
+				regulators {
+					tps65913_smps123: smps123 {
+						regulator-name = "vdd-cpu";
+						regulator-min-microvolt = <900000>;
+						regulator-max-microvolt = <1350000>;
+						regulator-always-on;
+						regulator-boot-on;
+						ti,roof-floor = <1>;
+						ti,mode-sleep = <3>;
+					};
+
+					tps65913_smps45: smps45 {
+						regulator-name = "vdd-core";
+						regulator-min-microvolt = <900000>;
+						regulator-max-microvolt = <1400000>;
+						regulator-always-on;
+						regulator-boot-on;
+						ti,roof-floor = <3>;
+					};
+
+					smps6 {
+						regulator-name = "va-lcd-hv";
+						regulator-min-microvolt = <1000000>;
+						regulator-max-microvolt = <1000000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					tps65913_smps7: smps7 {
+						regulator-name = "vdd-ddr";
+						regulator-min-microvolt = <1350000>;
+						regulator-max-microvolt = <1350000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					tps65913_smps8: smps8 {
+						regulator-name = "vdd-1v8";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					tps65913_smps9: smps9 {
+						regulator-name = "vdd-sd";
+						regulator-min-microvolt = <2900000>;
+						regulator-max-microvolt = <2900000>;
+						regulator-always-on;
+					};
+
+					tps65913_smps10_out1: smps10_out1 {
+						regulator-name = "vd-smps10-out1";
+						regulator-min-microvolt = <5000000>;
+						regulator-max-microvolt = <5000000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					tps65913_smps10_out2: smps10_out2 {
+						regulator-name = "vd-smps10-out2";
+						regulator-min-microvolt = <5000000>;
+						regulator-max-microvolt = <5000000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					tps65913_ldo1: ldo1 {
+						regulator-name = "vdd-hdmi-pll";
+						regulator-min-microvolt = <1050000>;
+						regulator-max-microvolt = <1050000>;
+						regulator-always-on;
+						ti,roof-floor = <3>;
+					};
+
+					tps65913_ldo2: ldo2 {
+						regulator-name = "vdd-2v8-dsi-csi";
+						regulator-min-microvolt = <1200000>;
+						regulator-max-microvolt = <1200000>;
+						regulator-boot-on;
+					};
+
+					ldo3 {
+						regulator-name = "vpp-fuse";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+					};
+
+					ldo4 {
+						regulator-name = "vdd-1v2-cam";
+						regulator-min-microvolt = <1200000>;
+						regulator-max-microvolt = <1200000>;
+					};
+
+					ldo5 {
+						regulator-name = "vdd-cam";
+						regulator-min-microvolt = <2800000>;
+						regulator-max-microvolt = <2800000>;
+					};
+
+					ldo6 {
+						regulator-name = "vdd-dev";
+						regulator-min-microvolt = <2850000>;
+						regulator-max-microvolt = <2850000>;
+						regulator-boot-on;
+					};
+
+					ldo7 {
+						regulator-name = "vdd-2v8-cam";
+						regulator-min-microvolt = <2800000>;
+						regulator-max-microvolt = <2800000>;
+					};
+
+					tps65913_ldo8: ldo8 {
+						regulator-name = "vdd-rtc";
+						regulator-min-microvolt = <950000>;
+						regulator-max-microvolt = <950000>;
+						regulator-always-on;
+						regulator-boot-on;
+						ti,enable-ldo8-tracking;
+					};
+
+					tps65913_ldo9: ldo9 {
+						regulator-name = "vdd-sdmmc";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <2900000>;
+					};
+
+					tps65913_ldoln: ldoln {
+						regulator-name = "vdd-hdmi";
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					ldousb {
+						regulator-name = "vdd-usb";
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+				};
+			};
+
+			rtc {
+				compatible = "ti,palmas-rtc";
+				interrupt-parent = <&palmas>;
+				interrupts = <8 0>;
+			};
+
+			pinmux {
+				compatible = "ti,tps65913-pinctrl";
+				ti,palmas-enable-dvfs1;
+
+				pinctrl-names = "default";
+				pinctrl-0 = <&palmas_default>;
+
+				palmas_default: pinmux {
+					pin_powergood {
+						pins = "powergood";
+						function = "powergood";
+					};
+
+					pin_vac {
+						pins = "vac";
+						function = "vac";
+					};
+
+					pin_gpio0 {
+						pins = "gpio0";
+						function = "gpio";
+					};
+
+					pin_gpio1 {
+						pins = "gpio1";
+						function = "gpio";
+					};
+
+					pin_gpio2 {
+						pins = "gpio2";
+						function = "gpio";
+					};
+
+					pin_gpio3 {
+						pins = "gpio3";
+						function = "gpio";
+					};
+
+					pin_gpio4 {
+						pins = "gpio4";
+						function = "gpio";
+					};
+
+					pin_gpio5 {
+						pins = "gpio5";
+						function = "gpio";
+					};
+
+					pin_gpio6 {
+						pins = "gpio6";
+						function = "gpio";
+					};
+
+					pin_gpio7 {
+						pins = "gpio7";
+						function = "gpio";
+					};
+				};
+			};
+		};
+	};
+
+	ahub@70080000 {
+		i2s@70080300 {
+			status = "okay";
+		};
+	};
+
+	mmc@78000000 {
+		/* WiFi */
+	};
+
+	/* MicroSD card */
+	mmc@78000400 {
+		status = "okay";
+
+		bus-width = <4>;
+		cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
+
+		nvidia,default-tap = <0x3>;
+		nvidia,default-trim = <0x3>;
+
+		vmmc-supply = <&vdd_usd>;
+		vqmmc-supply = <&tps65913_ldo9>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc3_default>;
+	};
+
+	mmc@78000600 {
+		/* eMMC */
+	};
+
+	usb@7d000000 {
+		compatible = "nvidia,tegra114-udc";
+		status = "okay";
+		dr_mode = "peripheral";
+
+		/* Peripheral USB via ASUS connector */
+	};
+
+	usb-phy@7d000000 {
+		status = "okay";
+	};
+
+	usb@7d008000 {
+		status = "okay";
+
+		/* Host USB via dock */
+	};
+
+	usb-phy@7d008000 {
+		status = "okay";
+		vbus-supply = <&vdd_5v0_sys>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+
+		enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+		power-supply = <&vdd_5v0_sys>;
+		pwms = <&pwm 1 1000000>;
+
+		brightness-levels = <1 255>;
+		num-interpolated-steps = <254>;
+		default-brightness-level = <224>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&backlight_default>;
+	};
+
+	/* PMIC has a built-in 32KHz oscillator which is used by PMC */
+	clk32k_in: clock-32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "pmic-oscillator";
+	};
+
+	firmware {
+		trusted-foundations {
+			compatible = "tlm,trusted-foundations";
+			tlm,version-major = <2>;
+			tlm,version-minor = <8>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		label = "GPIO Buttons";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_default>;
+
+		power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			debounce-interval = <10>;
+			wakeup-source;
+		};
+
+		volume-up {
+			label = "Volume Up";
+			gpios = <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <10>;
+		};
+
+		volume-down {
+			label = "Volume Down";
+			gpios = <&gpio TEGRA_GPIO(R, 1) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <10>;
+		};
+	};
+
+	gpio-hall-sensor {
+		compatible = "gpio-keys";
+
+		label = "GPIO Hall Effect Sensor";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_hall_sensor_default>;
+
+		hall-sensor {
+			label = "Hall Effect Sensor";
+			gpios = <&gpio TEGRA_GPIO(O, 5) GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			linux,can-disable;
+			wakeup-source;
+		};
+	};
+
+	sound {
+		compatible = "asus,tegra-audio-rt5639-tf701t",
+			     "nvidia,tegra-audio-rt5640";
+		nvidia,model = "Asus Transformer Pad TF701T RT5639";
+
+		nvidia,audio-routing =
+			"Headphones", "HPOR",
+			"Headphones", "HPOL",
+			"Speakers", "SPORP",
+			"Speakers", "SPORN",
+			"Speakers", "SPOLP",
+			"Speakers", "SPOLN",
+			"Mic Jack", "MICBIAS1",
+			"IN2P", "Mic Jack";
+
+		nvidia,i2s-controller = <&tegra_i2s0>;
+		nvidia,audio-codec = <&rt5639>;
+
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_LOW>;
+
+		clocks = <&tegra_car TEGRA114_CLK_PLL_A>,
+			 <&tegra_car TEGRA114_CLK_PLL_A_OUT0>,
+			 <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+
+		assigned-clocks = <&tegra_car TEGRA114_CLK_EXTERN1>,
+				  <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+
+		assigned-clock-parents = <&tegra_car TEGRA114_CLK_PLL_A_OUT0>,
+					 <&tegra_car TEGRA114_CLK_EXTERN1>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&hp_det_default>;
+	};
+
+	vdd_5v0_sys: regulator-5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_3v3_sys: regulator-3v3-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_lcd: regulator-vdd-lcd {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_lcd_1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&tps65913_smps8>;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(CC, 4) GPIO_ACTIVE_HIGH>;
+		regulator-boot-on;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&vdd_lcd_default>;
+	};
+
+	vdd_usd: regulator-vdd-usd {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_sd_slot";
+		regulator-min-microvolt = <2900000>;
+		regulator-max-microvolt = <2900000>;
+		vin-supply = <&tps65913_smps9>;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc3_vdd_default>;
+	};
+};
diff --git a/dts/src/arm/tegra114-dalmore.dts b/dts/src/arm/tegra114-dalmore.dts
index 7fd901f8d3..658edfb8d7 100644
--- a/dts/src/arm/tegra114-dalmore.dts
+++ b/dts/src/arm/tegra114-dalmore.dts
@@ -894,7 +894,7 @@
 		};
 
 		palmas: tps65913@58 {
-			compatible = "ti,palmas";
+			compatible = "ti,tps65913", "ti,palmas";
 			reg = <0x58>;
 			interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
 
@@ -1084,7 +1084,8 @@
 	spi@7000da00 {
 		status = "okay";
 		spi-max-frequency = <25000000>;
-		spi-flash@0 {
+
+		flash@0 {
 			compatible = "winbond,w25q32dw", "jedec,spi-nor";
 			reg = <0>;
 			spi-max-frequency = <20000000>;
@@ -1151,7 +1152,7 @@
 		default-brightness-level = <6>;
 	};
 
-	clk32k_in: clock@0 {
+	clk32k_in: clock-32k {
 		compatible = "fixed-clock";
 		clock-frequency = <32768>;
 		#clock-cells = <0>;
@@ -1186,7 +1187,7 @@
 		};
 	};
 
-	vdd_ac_bat_reg: regulator@0 {
+	vdd_ac_bat_reg: regulator-acbat {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_ac_bat";
 		regulator-min-microvolt = <5000000>;
@@ -1194,7 +1195,7 @@
 		regulator-always-on;
 	};
 
-	dvdd_ts_reg: regulator@1 {
+	dvdd_ts_reg: regulator-ts {
 		compatible = "regulator-fixed";
 		regulator-name = "dvdd_ts";
 		regulator-min-microvolt = <1800000>;
@@ -1203,7 +1204,7 @@
 		gpio = <&gpio TEGRA_GPIO(H, 5) GPIO_ACTIVE_HIGH>;
 	};
 
-	usb1_vbus_reg: regulator@3 {
+	usb1_vbus_reg: regulator-usb1 {
 		compatible = "regulator-fixed";
 		regulator-name = "usb1_vbus";
 		regulator-min-microvolt = <5000000>;
@@ -1214,7 +1215,7 @@
 		vin-supply = <&tps65090_dcdc1_reg>;
 	};
 
-	usb3_vbus_reg: regulator@4 {
+	usb3_vbus_reg: regulator-usb3 {
 		compatible = "regulator-fixed";
 		regulator-name = "usb2_vbus";
 		regulator-min-microvolt = <5000000>;
@@ -1225,7 +1226,7 @@
 		vin-supply = <&tps65090_dcdc1_reg>;
 	};
 
-	vdd_hdmi_reg: regulator@5 {
+	vdd_hdmi_reg: regulator-hdmi {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_hdmi_5v0";
 		regulator-min-microvolt = <5000000>;
@@ -1233,7 +1234,7 @@
 		vin-supply = <&tps65090_dcdc1_reg>;
 	};
 
-	vdd_cam_1v8_reg: regulator@6 {
+	vdd_cam_1v8_reg: regulator-cam {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_cam_1v8_reg";
 		regulator-min-microvolt = <1800000>;
@@ -1242,7 +1243,7 @@
 		gpio = <&palmas_gpio 6 0>;
 	};
 
-	vdd_5v0_hdmi: regulator@7 {
+	vdd_5v0_hdmi: regulator-hdmicon {
 		compatible = "regulator-fixed";
 		regulator-name = "VDD_5V0_HDMI_CON";
 		regulator-min-microvolt = <5000000>;
diff --git a/dts/src/arm/tegra114-roth.dts b/dts/src/arm/tegra114-roth.dts
index 07960171fa..2498cf18fd 100644
--- a/dts/src/arm/tegra114-roth.dts
+++ b/dts/src/arm/tegra114-roth.dts
@@ -801,7 +801,7 @@
 		};
 
 		palmas: pmic@58 {
-			compatible = "ti,palmas";
+			compatible = "ti,tps65913", "ti,palmas";
 			reg = <0x58>;
 			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 
@@ -1016,7 +1016,7 @@
 		enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
 	};
 
-	clk32k_in: clock@0 {
+	clk32k_in: clock-32k {
 		compatible = "fixed-clock";
 		clock-frequency = <32768>;
 		#clock-cells = <0>;
@@ -1045,7 +1045,7 @@
 		};
 	};
 
-	lcd_bl_en: regulator@0 {
+	lcd_bl_en: regulator-lcden {
 		compatible = "regulator-fixed";
 		regulator-name = "lcd_bl_en";
 		regulator-min-microvolt = <5000000>;
@@ -1053,7 +1053,7 @@
 		regulator-boot-on;
 	};
 
-	vdd_lcd: regulator@1 {
+	vdd_lcd: regulator-lcd {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_lcd_1v8";
 		regulator-min-microvolt = <1800000>;
@@ -1064,7 +1064,7 @@
 		regulator-boot-on;
 	};
 
-	regulator@2 {
+	regulator-1v8ts {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_1v8_ts";
 		regulator-min-microvolt = <1800000>;
@@ -1073,7 +1073,7 @@
 		regulator-boot-on;
 	};
 
-	regulator@3 {
+	regulator-3v3ts {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_3v3_ts";
 		regulator-min-microvolt = <3300000>;
@@ -1083,7 +1083,7 @@
 		regulator-boot-on;
 	};
 
-	regulator@4 {
+	regulator-1v8com {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_1v8_com";
 		regulator-min-microvolt = <1800000>;
@@ -1094,7 +1094,7 @@
 		regulator-boot-on;
 	};
 
-	regulator@5 {
+	regulator-3v3com {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_3v3_com";
 		regulator-min-microvolt = <3300000>;
diff --git a/dts/src/arm/tegra114-tn7.dts b/dts/src/arm/tegra114-tn7.dts
index 745d234b10..ef8f722dd9 100644
--- a/dts/src/arm/tegra114-tn7.dts
+++ b/dts/src/arm/tegra114-tn7.dts
@@ -62,7 +62,7 @@
 		clock-frequency = <400000>;
 
 		palmas: pmic@58 {
-			compatible = "ti,palmas";
+			compatible = "ti,tps65913", "ti,palmas";
 			reg = <0x58>;
 			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 
@@ -273,7 +273,7 @@
 		power-supply = <&lcd_bl_en>;
 	};
 
-	clk32k_in: clock@0 {
+	clk32k_in: clock-32k {
 		compatible = "fixed-clock";
 		clock-frequency = <32768>;
 		#clock-cells = <0>;
@@ -303,7 +303,7 @@
 	};
 
 	/* FIXME: output of BQ24192 */
-	vs_sys: regulator@0 {
+	vs_sys: regulator-vs {
 		compatible = "regulator-fixed";
 		regulator-name = "VS_SYS";
 		regulator-min-microvolt = <4200000>;
@@ -312,7 +312,7 @@
 		regulator-boot-on;
 	};
 
-	lcd_bl_en: regulator@1 {
+	lcd_bl_en: regulator-lcden {
 		compatible = "regulator-fixed";
 		regulator-name = "VDD_LCD_BL";
 		regulator-min-microvolt = <16500000>;
@@ -323,7 +323,7 @@
 		regulator-boot-on;
 	};
 
-	vdd_lcd: regulator@2 {
+	vdd_lcd: regulator-lcd {
 		compatible = "regulator-fixed";
 		regulator-name = "VD_LCD_1V8";
 		regulator-min-microvolt = <1800000>;
diff --git a/dts/src/arm/tegra114.dtsi b/dts/src/arm/tegra114.dtsi
index 546272e396..09996acad6 100644
--- a/dts/src/arm/tegra114.dtsi
+++ b/dts/src/arm/tegra114.dtsi
@@ -17,6 +17,19 @@
 		reg = <0x80000000 0x0>;
 	};
 
+	sram@40000000 {
+		compatible = "mmio-sram";
+		reg = <0x40000000 0x40000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x40000000 0x40000>;
+
+		vde_pool: sram@400 {
+			reg = <0x400 0x3fc00>;
+			pool;
+		};
+	};
+
 	host1x@50000000 {
 		compatible = "nvidia,tegra114-host1x";
 		reg = <0x50000000 0x00028000>;
@@ -25,8 +38,8 @@
 		interrupt-names = "syncpt", "host1x";
 		clocks = <&tegra_car TEGRA114_CLK_HOST1X>;
 		clock-names = "host1x";
-		resets = <&tegra_car 28>;
-		reset-names = "host1x";
+		resets = <&tegra_car 28>, <&mc TEGRA114_MC_RESET_HC>;
+		reset-names = "host1x", "mc";
 		iommus = <&mc TEGRA_SWGROUP_HC>;
 
 		#address-cells = <1>;
@@ -39,8 +52,8 @@
 			reg = <0x54140000 0x00040000>;
 			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&tegra_car TEGRA114_CLK_GR2D>;
-			resets = <&tegra_car 21>;
-			reset-names = "2d";
+			resets = <&tegra_car 21>, <&mc TEGRA114_MC_RESET_2D>;
+			reset-names = "2d", "mc";
 
 			iommus = <&mc TEGRA_SWGROUP_G2>;
 		};
@@ -49,8 +62,8 @@
 			compatible = "nvidia,tegra114-gr3d";
 			reg = <0x54180000 0x00040000>;
 			clocks = <&tegra_car TEGRA114_CLK_GR3D>;
-			resets = <&tegra_car 24>;
-			reset-names = "3d";
+			resets = <&tegra_car 24>, <&mc TEGRA114_MC_RESET_3D>;
+			reset-names = "3d", "mc";
 
 			iommus = <&mc TEGRA_SWGROUP_NV>;
 		};
@@ -105,7 +118,7 @@
 			status = "disabled";
 		};
 
-		dsi@54300000 {
+		dsia: dsi@54300000 {
 			compatible = "nvidia,tegra114-dsi";
 			reg = <0x54300000 0x00040000>;
 			clocks = <&tegra_car TEGRA114_CLK_DSIA>,
@@ -121,7 +134,7 @@
 			#size-cells = <0>;
 		};
 
-		dsi@54400000 {
+		dsib: dsi@54400000 {
 			compatible = "nvidia,tegra114-dsi";
 			reg = <0x54400000 0x00040000>;
 			clocks = <&tegra_car TEGRA114_CLK_DSIB>,
@@ -164,7 +177,7 @@
 	};
 
 	timer@60005000 {
-		compatible = "nvidia,tegra114-timer", "nvidia,tegra30-timer", "nvidia,tegra20-timer";
+		compatible = "nvidia,tegra114-timer", "nvidia,tegra30-timer";
 		reg = <0x60005000 0x400>;
 		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
@@ -248,9 +261,31 @@
 		gpio-controller;
 		#interrupt-cells = <2>;
 		interrupt-controller;
-		/*
 		gpio-ranges = <&pinmux 0 0 246>;
-		*/
+	};
+
+	vde@6001a000 {
+		compatible = "nvidia,tegra114-vde";
+		reg = <0x6001a000 0x1000>, /* Syntax Engine */
+		      <0x6001b000 0x1000>, /* Video Bitstream Engine */
+		      <0x6001c000  0x100>, /* Macroblock Engine */
+		      <0x6001c200  0x100>, /* Post-processing Engine */
+		      <0x6001c400  0x100>, /* Motion Compensation Engine */
+		      <0x6001c600  0x100>, /* Transform Engine */
+		      <0x6001c800  0x100>, /* Pixel prediction block */
+		      <0x6001ca00  0x100>, /* Video DMA */
+		      <0x6001d800  0x400>; /* Video frame controls */
+		reg-names = "sxe", "bsev", "mbe", "ppe", "mce",
+			    "tfe", "ppb", "vdma", "frameid";
+		iram = <&vde_pool>; /* IRAM region */
+		interrupts = <GIC_SPI  9 IRQ_TYPE_LEVEL_HIGH>, /* Sync token interrupt */
+			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, /* BSE-V interrupt */
+			     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; /* SXE interrupt */
+		interrupt-names = "sync-token", "bsev", "sxe";
+		clocks = <&tegra_car TEGRA114_CLK_VDE>;
+		reset-names = "vde", "mc";
+		resets = <&tegra_car 61>, <&mc TEGRA114_MC_RESET_VDE>;
+		iommus = <&mc TEGRA_SWGROUP_VDE>;
 	};
 
 	apbmisc@70000800 {
@@ -542,6 +577,7 @@
 
 		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
 
+		#reset-cells = <1>;
 		#iommu-cells = <1>;
 	};
 
diff --git a/dts/src/arm/tegra124-apalis-emc.dtsi b/dts/src/arm/tegra124-apalis-emc.dtsi
index a7ac805eee..7143c6b2ec 100644
--- a/dts/src/arm/tegra124-apalis-emc.dtsi
+++ b/dts/src/arm/tegra124-apalis-emc.dtsi
@@ -15,66 +15,77 @@
 				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
 				clock-names = "emc-parent";
 			};
+
 			timing-20400000 {
 				clock-frequency = <20400000>;
 				nvidia,parent-clock-frequency = <408000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
 				clock-names = "emc-parent";
 			};
+
 			timing-40800000 {
 				clock-frequency = <40800000>;
 				nvidia,parent-clock-frequency = <408000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
 				clock-names = "emc-parent";
 			};
+
 			timing-68000000 {
 				clock-frequency = <68000000>;
 				nvidia,parent-clock-frequency = <408000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
 				clock-names = "emc-parent";
 			};
+
 			timing-102000000 {
 				clock-frequency = <102000000>;
 				nvidia,parent-clock-frequency = <408000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
 				clock-names = "emc-parent";
 			};
+
 			timing-204000000 {
 				clock-frequency = <204000000>;
 				nvidia,parent-clock-frequency = <408000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
 				clock-names = "emc-parent";
 			};
+
 			timing-300000000 {
 				clock-frequency = <300000000>;
 				nvidia,parent-clock-frequency = <600000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_C>;
 				clock-names = "emc-parent";
 			};
+
 			timing-396000000 {
 				clock-frequency = <396000000>;
 				nvidia,parent-clock-frequency = <792000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_M>;
 				clock-names = "emc-parent";
 			};
+
 			timing-528000000 {
 				clock-frequency = <528000000>;
 				nvidia,parent-clock-frequency = <528000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_M_UD>;
 				clock-names = "emc-parent";
 			};
+
 			timing-600000000 {
 				clock-frequency = <600000000>;
 				nvidia,parent-clock-frequency = <600000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_C_UD>;
 				clock-names = "emc-parent";
 			};
+
 			timing-792000000 {
 				clock-frequency = <792000000>;
 				nvidia,parent-clock-frequency = <792000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_M_UD>;
 				clock-names = "emc-parent";
 			};
+
 			timing-924000000 {
 				clock-frequency = <924000000>;
 				nvidia,parent-clock-frequency = <924000000>;
@@ -84,6 +95,216 @@
 		};
 	};
 
+	memory-controller@70019000 {
+		emc-timings-1 {
+			nvidia,ram-code = <1>;
+
+			timing-12750000 {
+				clock-frequency = <12750000>;
+
+				nvidia,emem-configuration = <
+					0x40040001 0x8000000a
+					0x00000001 0x00000001
+					0x00000002 0x00000000
+					0x00000002 0x00000001
+					0x00000003 0x00000008
+					0x00000003 0x00000002
+					0x00000003 0x00000006
+					0x06030203 0x000a0502
+					0x77e30303 0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-20400000 {
+				clock-frequency = <20400000>;
+
+				nvidia,emem-configuration = <
+					0x40020001 0x80000012
+					0x00000001 0x00000001
+					0x00000002 0x00000000
+					0x00000002 0x00000001
+					0x00000003 0x00000008
+					0x00000003 0x00000002
+					0x00000003 0x00000006
+					0x06030203 0x000a0502
+					0x76230303 0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-40800000 {
+				clock-frequency = <40800000>;
+
+				nvidia,emem-configuration = <
+					0xa0000001 0x80000017
+					0x00000001 0x00000001
+					0x00000002 0x00000000
+					0x00000002 0x00000001
+					0x00000003 0x00000008
+					0x00000003 0x00000002
+					0x00000003 0x00000006
+					0x06030203 0x000a0502
+					0x74a30303 0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-68000000 {
+				clock-frequency = <68000000>;
+
+				nvidia,emem-configuration = <
+					0x00000001 0x8000001e
+					0x00000001 0x00000001
+					0x00000002 0x00000000
+					0x00000002 0x00000001
+					0x00000003 0x00000008
+					0x00000003 0x00000002
+					0x00000003 0x00000006
+					0x06030203 0x000a0502
+					0x74230403 0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = <
+					0x08000001 0x80000026
+					0x00000001 0x00000001
+					0x00000003 0x00000000
+					0x00000002 0x00000001
+					0x00000003 0x00000008
+					0x00000003 0x00000002
+					0x00000003 0x00000006
+					0x06030203 0x000a0503
+					0x73c30504 0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = <
+					0x01000003 0x80000040
+					0x00000001 0x00000001
+					0x00000004 0x00000002
+					0x00000003 0x00000001
+					0x00000003 0x00000008
+					0x00000003 0x00000002
+					0x00000004 0x00000006
+					0x06040203 0x000a0504
+					0x73840a05 0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-300000000 {
+				clock-frequency = <300000000>;
+
+				nvidia,emem-configuration = <
+					0x08000004 0x80000040
+					0x00000001 0x00000002
+					0x00000007 0x00000004
+					0x00000004 0x00000001
+					0x00000002 0x00000007
+					0x00000002 0x00000002
+					0x00000004 0x00000006
+					0x06040202 0x000b0607
+					0x77450e08 0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-396000000 {
+				clock-frequency = <396000000>;
+
+				nvidia,emem-configuration = <
+					0x0f000005 0x80000040
+					0x00000001 0x00000002
+					0x00000009 0x00000005
+					0x00000006 0x00000001
+					0x00000002 0x00000008
+					0x00000002 0x00000002
+					0x00000004 0x00000006
+					0x06040202 0x000d0709
+					0x7586120a 0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-528000000 {
+				clock-frequency = <528000000>;
+
+				nvidia,emem-configuration = <
+					0x0f000007 0x80000040
+					0x00000002 0x00000003
+					0x0000000c 0x00000007
+					0x00000008 0x00000001
+					0x00000002 0x00000009
+					0x00000002 0x00000002
+					0x00000005 0x00000006
+					0x06050202 0x0010090c
+					0x7428180d 0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-600000000 {
+				clock-frequency = <600000000>;
+
+				nvidia,emem-configuration = <
+					0x00000009 0x80000040
+					0x00000003 0x00000004
+					0x0000000e 0x00000009
+					0x0000000a 0x00000001
+					0x00000003 0x0000000b
+					0x00000002 0x00000002
+					0x00000005 0x00000007
+					0x07050202 0x00130b0e
+					0x73a91b0f 0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-792000000 {
+				clock-frequency = <792000000>;
+
+				nvidia,emem-configuration = <
+					0x0e00000b 0x80000040
+					0x00000004 0x00000005
+					0x00000013 0x0000000c
+					0x0000000d 0x00000002
+					0x00000003 0x0000000c
+					0x00000002 0x00000002
+					0x00000006 0x00000008
+					0x08060202 0x00170e13
+					0x736c2414 0x70000f02
+					0x001f0000
+				>;
+			};
+
+			timing-924000000 {
+				clock-frequency = <924000000>;
+
+				nvidia,emem-configuration = <
+					0x0e00000d 0x80000040
+					0x00000005 0x00000006
+					0x00000016 0x0000000e
+					0x0000000f 0x00000002
+					0x00000004 0x0000000e
+					0x00000002 0x00000002
+					0x00000006 0x00000009
+					0x09060202 0x001a1016
+					0x734e2a17 0x70000f02
+					0x001f0000
+				>;
+			};
+		};
+	};
+
 	external-memory-controller@7001b000 {
 		emc-timings-1 {
 			nvidia,ram-code = <1>;
@@ -1251,225 +1472,14 @@
 					0x00000011
 				>;
 			};
-
-		};
-	};
-
-	memory-controller@70019000 {
-		emc-timings-1 {
-			nvidia,ram-code = <1>;
-
-			timing-12750000 {
-				clock-frequency = <12750000>;
-
-				nvidia,emem-configuration = <
-					0x40040001 0x8000000a
-					0x00000001 0x00000001
-					0x00000002 0x00000000
-					0x00000002 0x00000001
-					0x00000003 0x00000008
-					0x00000003 0x00000002
-					0x00000003 0x00000006
-					0x06030203 0x000a0502
-					0x77e30303 0x70000f03
-					0x001f0000
-				>;
-			};
-
-			timing-20400000 {
-				clock-frequency = <20400000>;
-
-				nvidia,emem-configuration = <
-					0x40020001 0x80000012
-					0x00000001 0x00000001
-					0x00000002 0x00000000
-					0x00000002 0x00000001
-					0x00000003 0x00000008
-					0x00000003 0x00000002
-					0x00000003 0x00000006
-					0x06030203 0x000a0502
-					0x76230303 0x70000f03
-					0x001f0000
-				>;
-			};
-
-			timing-40800000 {
-				clock-frequency = <40800000>;
-
-				nvidia,emem-configuration = <
-					0xa0000001 0x80000017
-					0x00000001 0x00000001
-					0x00000002 0x00000000
-					0x00000002 0x00000001
-					0x00000003 0x00000008
-					0x00000003 0x00000002
-					0x00000003 0x00000006
-					0x06030203 0x000a0502
-					0x74a30303 0x70000f03
-					0x001f0000
-				>;
-			};
-
-			timing-68000000 {
-				clock-frequency = <68000000>;
-
-				nvidia,emem-configuration = <
-					0x00000001 0x8000001e
-					0x00000001 0x00000001
-					0x00000002 0x00000000
-					0x00000002 0x00000001
-					0x00000003 0x00000008
-					0x00000003 0x00000002
-					0x00000003 0x00000006
-					0x06030203 0x000a0502
-					0x74230403 0x70000f03
-					0x001f0000
-				>;
-			};
-
-			timing-102000000 {
-				clock-frequency = <102000000>;
-
-				nvidia,emem-configuration = <
-					0x08000001 0x80000026
-					0x00000001 0x00000001
-					0x00000003 0x00000000
-					0x00000002 0x00000001
-					0x00000003 0x00000008
-					0x00000003 0x00000002
-					0x00000003 0x00000006
-					0x06030203 0x000a0503
-					0x73c30504 0x70000f03
-					0x001f0000
-				>;
-			};
-
-			timing-204000000 {
-				clock-frequency = <204000000>;
-
-				nvidia,emem-configuration = <
-					0x01000003 0x80000040
-					0x00000001 0x00000001
-					0x00000004 0x00000002
-					0x00000003 0x00000001
-					0x00000003 0x00000008
-					0x00000003 0x00000002
-					0x00000004 0x00000006
-					0x06040203 0x000a0504
-					0x73840a05 0x70000f03
-					0x001f0000
-				>;
-			};
-
-			timing-300000000 {
-				clock-frequency = <300000000>;
-
-				nvidia,emem-configuration = <
-					0x08000004 0x80000040
-					0x00000001 0x00000002
-					0x00000007 0x00000004
-					0x00000004 0x00000001
-					0x00000002 0x00000007
-					0x00000002 0x00000002
-					0x00000004 0x00000006
-					0x06040202 0x000b0607
-					0x77450e08 0x70000f03
-					0x001f0000
-				>;
-			};
-
-			timing-396000000 {
-				clock-frequency = <396000000>;
-
-				nvidia,emem-configuration = <
-					0x0f000005 0x80000040
-					0x00000001 0x00000002
-					0x00000009 0x00000005
-					0x00000006 0x00000001
-					0x00000002 0x00000008
-					0x00000002 0x00000002
-					0x00000004 0x00000006
-					0x06040202 0x000d0709
-					0x7586120a 0x70000f03
-					0x001f0000
-				>;
-			};
-
-			timing-528000000 {
-				clock-frequency = <528000000>;
-
-				nvidia,emem-configuration = <
-					0x0f000007 0x80000040
-					0x00000002 0x00000003
-					0x0000000c 0x00000007
-					0x00000008 0x00000001
-					0x00000002 0x00000009
-					0x00000002 0x00000002
-					0x00000005 0x00000006
-					0x06050202 0x0010090c
-					0x7428180d 0x70000f03
-					0x001f0000
-				>;
-			};
-
-			timing-600000000 {
-				clock-frequency = <600000000>;
-
-				nvidia,emem-configuration = <
-					0x00000009 0x80000040
-					0x00000003 0x00000004
-					0x0000000e 0x00000009
-					0x0000000a 0x00000001
-					0x00000003 0x0000000b
-					0x00000002 0x00000002
-					0x00000005 0x00000007
-					0x07050202 0x00130b0e
-					0x73a91b0f 0x70000f03
-					0x001f0000
-				>;
-			};
-
-			timing-792000000 {
-				clock-frequency = <792000000>;
-
-				nvidia,emem-configuration = <
-					0x0e00000b 0x80000040
-					0x00000004 0x00000005
-					0x00000013 0x0000000c
-					0x0000000d 0x00000002
-					0x00000003 0x0000000c
-					0x00000002 0x00000002
-					0x00000006 0x00000008
-					0x08060202 0x00170e13
-					0x736c2414 0x70000f02
-					0x001f0000
-				>;
-			};
-
-			timing-924000000 {
-				clock-frequency = <924000000>;
-
-				nvidia,emem-configuration = <
-					0x0e00000d 0x80000040
-					0x00000005 0x00000006
-					0x00000016 0x0000000e
-					0x0000000f 0x00000002
-					0x00000004 0x0000000e
-					0x00000002 0x00000002
-					0x00000006 0x00000009
-					0x09060202 0x001a1016
-					0x734e2a17 0x70000f02
-					0x001f0000
-				>;
-			};
 		};
 	};
 };
 
 &emc_icc_dvfs_opp_table {
-	/delete-node/ opp@1200000000,1100;
+	/delete-node/ opp-1200000000-1100;
 };
 
 &emc_bw_dfs_opp_table {
-	/delete-node/ opp@1200000000;
+	/delete-node/ opp-1200000000;
 };
diff --git a/dts/src/arm/tegra124-apalis-eval.dts b/dts/src/arm/tegra124-apalis-eval.dts
index 28c29b6813..3209554ec7 100644
--- a/dts/src/arm/tegra124-apalis-eval.dts
+++ b/dts/src/arm/tegra124-apalis-eval.dts
@@ -246,7 +246,7 @@
 
 &gpio {
 	/* Apalis GPIO7 MXM3 pin 15 PLX PEX 8605 PCIe Switch Reset */
-	pex-perst-n {
+	pex-perst-n-hog {
 		gpio-hog;
 		gpios = <TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>;
 		output-high;
diff --git a/dts/src/arm/tegra124-apalis-v1.2-eval.dts b/dts/src/arm/tegra124-apalis-v1.2-eval.dts
index f3afde4106..814257c79b 100644
--- a/dts/src/arm/tegra124-apalis-v1.2-eval.dts
+++ b/dts/src/arm/tegra124-apalis-v1.2-eval.dts
@@ -248,7 +248,7 @@
 
 &gpio {
 	/* Apalis GPIO7 MXM3 pin 15 PLX PEX 8605 PCIe Switch Reset */
-	pex-perst-n {
+	pex-perst-n-hog {
 		gpio-hog;
 		gpios = <TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>;
 		output-high;
diff --git a/dts/src/arm/tegra124-apalis-v1.2.dtsi b/dts/src/arm/tegra124-apalis-v1.2.dtsi
index cde9ae8fa0..dbb0da08cb 100644
--- a/dts/src/arm/tegra124-apalis-v1.2.dtsi
+++ b/dts/src/arm/tegra124-apalis-v1.2.dtsi
@@ -57,7 +57,7 @@
 		};
 	};
 
-	gpu@0,57000000 {
+	gpu@57000000 {
 		/*
 		 * Node left disabled on purpose - the bootloader will enable
 		 * it after having set the VPR up
@@ -1539,14 +1539,17 @@
 
 	serial@70006040 {
 		compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart";
+		/delete-property/ reg-shift;
 	};
 
 	serial@70006200 {
 		compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart";
+		/delete-property/ reg-shift;
 	};
 
 	serial@70006300 {
 		compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart";
+		/delete-property/ reg-shift;
 	};
 
 	hdmi_ddc: i2c@7000c700 {
@@ -1885,6 +1888,7 @@
 			usb2-0 {
 				status = "okay";
 				mode = "otg";
+				usb-role-switch;
 				vbus-supply = <&reg_usbo1_vbus>;
 			};
 
@@ -2021,7 +2025,7 @@
 	};
 
 	thermal-zones {
-		cpu {
+		cpu-thermal {
 			trips {
 				cpu-shutdown-trip {
 					temperature = <101000>;
@@ -2031,7 +2035,7 @@
 			};
 		};
 
-		mem {
+		mem-thermal {
 			trips {
 				mem-shutdown-trip {
 					temperature = <101000>;
@@ -2041,7 +2045,7 @@
 			};
 		};
 
-		gpu {
+		gpu-thermal {
 			trips {
 				gpu-shutdown-trip {
 					temperature = <101000>;
@@ -2055,7 +2059,7 @@
 
 &gpio {
 	/* I210 Gigabit Ethernet Controller Reset */
-	lan-reset-n {
+	lan-reset-n-hog {
 		gpio-hog;
 		gpios = <TEGRA_GPIO(S, 2) GPIO_ACTIVE_HIGH>;
 		output-high;
@@ -2063,7 +2067,7 @@
 	};
 
 	/* Control MXM3 pin 26 Reset Module Output Carrier Input */
-	reset-moci-ctrl {
+	reset-moci-ctrl-hog {
 		gpio-hog;
 		gpios = <TEGRA_GPIO(U, 4) GPIO_ACTIVE_HIGH>;
 		output-high;
diff --git a/dts/src/arm/tegra124-apalis.dtsi b/dts/src/arm/tegra124-apalis.dtsi
index a46d9ba9bb..d3f16c117b 100644
--- a/dts/src/arm/tegra124-apalis.dtsi
+++ b/dts/src/arm/tegra124-apalis.dtsi
@@ -56,7 +56,7 @@
 		};
 	};
 
-	gpu@0,57000000 {
+	gpu@57000000 {
 		/*
 		 * Node left disabled on purpose - the bootloader will enable
 		 * it after having set the VPR up
@@ -1532,14 +1532,17 @@
 
 	serial@70006040 {
 		compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart";
+		/delete-property/ reg-shift;
 	};
 
 	serial@70006200 {
 		compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart";
+		/delete-property/ reg-shift;
 	};
 
 	serial@70006300 {
 		compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart";
+		/delete-property/ reg-shift;
 	};
 
 	hdmi_ddc: i2c@7000c400 {
@@ -1877,6 +1880,7 @@
 			usb2-0 {
 				status = "okay";
 				mode = "otg";
+				usb-role-switch;
 				vbus-supply = <&reg_usbo1_vbus>;
 			};
 
@@ -2013,7 +2017,7 @@
 	};
 
 	thermal-zones {
-		cpu {
+		cpu-thermal {
 			trips {
 				cpu-shutdown-trip {
 					temperature = <101000>;
@@ -2023,7 +2027,7 @@
 			};
 		};
 
-		mem {
+		mem-thermal {
 			trips {
 				mem-shutdown-trip {
 					temperature = <101000>;
@@ -2033,7 +2037,7 @@
 			};
 		};
 
-		gpu {
+		gpu-thermal {
 			trips {
 				gpu-shutdown-trip {
 					temperature = <101000>;
@@ -2047,7 +2051,7 @@
 
 &gpio {
 	/* I210 Gigabit Ethernet Controller Reset */
-	lan-reset-n {
+	lan-reset-n-hog {
 		gpio-hog;
 		gpios = <TEGRA_GPIO(S, 2) GPIO_ACTIVE_HIGH>;
 		output-high;
@@ -2055,7 +2059,7 @@
 	};
 
 	/* Control MXM3 pin 26 Reset Module Output Carrier Input */
-	reset-moci-ctrl {
+	reset-moci-ctrl-hog {
 		gpio-hog;
 		gpios = <TEGRA_GPIO(U, 4) GPIO_ACTIVE_HIGH>;
 		output-high;
diff --git a/dts/src/arm/tegra124-jetson-tk1-emc.dtsi b/dts/src/arm/tegra124-jetson-tk1-emc.dtsi
index df4e463afb..79e776db5f 100644
--- a/dts/src/arm/tegra124-jetson-tk1-emc.dtsi
+++ b/dts/src/arm/tegra124-jetson-tk1-emc.dtsi
@@ -10,66 +10,77 @@
 				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
 				clock-names = "emc-parent";
 			};
+
 			timing-20400000 {
 				clock-frequency = <20400000>;
 				nvidia,parent-clock-frequency = <408000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
 				clock-names = "emc-parent";
 			};
+
 			timing-40800000 {
 				clock-frequency = <40800000>;
 				nvidia,parent-clock-frequency = <408000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
 				clock-names = "emc-parent";
 			};
+
 			timing-68000000 {
 				clock-frequency = <68000000>;
 				nvidia,parent-clock-frequency = <408000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
 				clock-names = "emc-parent";
 			};
+
 			timing-102000000 {
 				clock-frequency = <102000000>;
 				nvidia,parent-clock-frequency = <408000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
 				clock-names = "emc-parent";
 			};
+
 			timing-204000000 {
 				clock-frequency = <204000000>;
 				nvidia,parent-clock-frequency = <408000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
 				clock-names = "emc-parent";
 			};
+
 			timing-300000000 {
 				clock-frequency = <300000000>;
 				nvidia,parent-clock-frequency = <600000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_C>;
 				clock-names = "emc-parent";
 			};
+
 			timing-396000000 {
 				clock-frequency = <396000000>;
 				nvidia,parent-clock-frequency = <792000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_M>;
 				clock-names = "emc-parent";
 			};
+
 			timing-528000000 {
 				clock-frequency = <528000000>;
 				nvidia,parent-clock-frequency = <528000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_M_UD>;
 				clock-names = "emc-parent";
 			};
+
 			timing-600000000 {
 				clock-frequency = <600000000>;
 				nvidia,parent-clock-frequency = <600000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_C_UD>;
 				clock-names = "emc-parent";
 			};
+
 			timing-792000000 {
 				clock-frequency = <792000000>;
 				nvidia,parent-clock-frequency = <792000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_M_UD>;
 				clock-names = "emc-parent";
 			};
+
 			timing-924000000 {
 				clock-frequency = <924000000>;
 				nvidia,parent-clock-frequency = <924000000>;
@@ -79,6 +90,324 @@
 		};
 	};
 
+	memory-controller@70019000 {
+		emc-timings-3 {
+			nvidia,ram-code = <3>;
+
+			timing-12750000 {
+				clock-frequency = <12750000>;
+
+				nvidia,emem-configuration = <
+					0x40040001
+					0x8000000a
+					0x00000001
+					0x00000001
+					0x00000002
+					0x00000000
+					0x00000002
+					0x00000001
+					0x00000003
+					0x00000008
+					0x00000003
+					0x00000002
+					0x00000003
+					0x00000006
+					0x06030203
+					0x000a0502
+					0x77e30303
+					0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-20400000 {
+				clock-frequency = <20400000>;
+
+				nvidia,emem-configuration = <
+					0x40020001
+					0x80000012
+					0x00000001
+					0x00000001
+					0x00000002
+					0x00000000
+					0x00000002
+					0x00000001
+					0x00000003
+					0x00000008
+					0x00000003
+					0x00000002
+					0x00000003
+					0x00000006
+					0x06030203
+					0x000a0502
+					0x76230303
+					0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-40800000 {
+				clock-frequency = <40800000>;
+
+				nvidia,emem-configuration = <
+					0xa0000001
+					0x80000017
+					0x00000001
+					0x00000001
+					0x00000002
+					0x00000000
+					0x00000002
+					0x00000001
+					0x00000003
+					0x00000008
+					0x00000003
+					0x00000002
+					0x00000003
+					0x00000006
+					0x06030203
+					0x000a0502
+					0x74a30303
+					0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-68000000 {
+				clock-frequency = <68000000>;
+
+				nvidia,emem-configuration = <
+					0x00000001
+					0x8000001e
+					0x00000001
+					0x00000001
+					0x00000002
+					0x00000000
+					0x00000002
+					0x00000001
+					0x00000003
+					0x00000008
+					0x00000003
+					0x00000002
+					0x00000003
+					0x00000006
+					0x06030203
+					0x000a0502
+					0x74230403
+					0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = <
+					0x08000001
+					0x80000026
+					0x00000001
+					0x00000001
+					0x00000003
+					0x00000000
+					0x00000002
+					0x00000001
+					0x00000003
+					0x00000008
+					0x00000003
+					0x00000002
+					0x00000003
+					0x00000006
+					0x06030203
+					0x000a0503
+					0x73c30504
+					0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = <
+					0x01000003
+					0x80000040
+					0x00000001
+					0x00000001
+					0x00000004
+					0x00000002
+					0x00000003
+					0x00000001
+					0x00000003
+					0x00000008
+					0x00000003
+					0x00000002
+					0x00000004
+					0x00000006
+					0x06040203
+					0x000a0504
+					0x73840a05
+					0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-300000000 {
+				clock-frequency = <300000000>;
+
+				nvidia,emem-configuration = <
+					0x08000004
+					0x80000040
+					0x00000001
+					0x00000002
+					0x00000007
+					0x00000004
+					0x00000004
+					0x00000001
+					0x00000002
+					0x00000007
+					0x00000002
+					0x00000002
+					0x00000004
+					0x00000006
+					0x06040202
+					0x000b0607
+					0x77450e08
+					0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-396000000 {
+				clock-frequency = <396000000>;
+
+				nvidia,emem-configuration = <
+					0x0f000005
+					0x80000040
+					0x00000001
+					0x00000002
+					0x00000009
+					0x00000005
+					0x00000006
+					0x00000001
+					0x00000002
+					0x00000008
+					0x00000002
+					0x00000002
+					0x00000004
+					0x00000006
+					0x06040202
+					0x000d0709
+					0x7586120a
+					0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-528000000 {
+				clock-frequency = <528000000>;
+
+				nvidia,emem-configuration = <
+					0x0f000007
+					0x80000040
+					0x00000002
+					0x00000003
+					0x0000000c
+					0x00000007
+					0x00000008
+					0x00000001
+					0x00000002
+					0x00000009
+					0x00000002
+					0x00000002
+					0x00000005
+					0x00000006
+					0x06050202
+					0x0010090c
+					0x7428180d
+					0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-600000000 {
+				clock-frequency = <600000000>;
+
+				nvidia,emem-configuration = <
+					0x00000009
+					0x80000040
+					0x00000003
+					0x00000004
+					0x0000000e
+					0x00000009
+					0x0000000a
+					0x00000001
+					0x00000003
+					0x0000000b
+					0x00000002
+					0x00000002
+					0x00000005
+					0x00000007
+					0x07050202
+					0x00130b0e
+					0x73a91b0f
+					0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-792000000 {
+				clock-frequency = <792000000>;
+
+				nvidia,emem-configuration = <
+					0x0e00000b
+					0x80000040
+					0x00000004
+					0x00000005
+					0x00000013
+					0x0000000c
+					0x0000000d
+					0x00000002
+					0x00000003
+					0x0000000c
+					0x00000002
+					0x00000002
+					0x00000006
+					0x00000008
+					0x08060202
+					0x00170e13
+					0x736c2414
+					0x70000f02
+					0x001f0000
+				>;
+			};
+
+			timing-924000000 {
+				clock-frequency = <924000000>;
+
+				nvidia,emem-configuration = <
+					0x0e00000d
+					0x80000040
+					0x00000005
+					0x00000006
+					0x00000016
+					0x0000000e
+					0x0000000f
+					0x00000002
+					0x00000004
+					0x0000000e
+					0x00000002
+					0x00000002
+					0x00000006
+					0x00000009
+					0x09060202
+					0x001a1016
+					0x734e2a17
+					0x70000f02
+					0x001f0000
+				>;
+			};
+		};
+	};
+
 	external-memory-controller@7001b000 {
 		emc-timings-3 {
 			nvidia,ram-code = <3>;
@@ -2098,333 +2427,14 @@
 					0x00000011
 				>;
 			};
-
-		};
-	};
-
-	memory-controller@70019000 {
-		emc-timings-3 {
-			nvidia,ram-code = <3>;
-
-			timing-12750000 {
-				clock-frequency = <12750000>;
-
-				nvidia,emem-configuration = <
-					0x40040001
-					0x8000000a
-					0x00000001
-					0x00000001
-					0x00000002
-					0x00000000
-					0x00000002
-					0x00000001
-					0x00000003
-					0x00000008
-					0x00000003
-					0x00000002
-					0x00000003
-					0x00000006
-					0x06030203
-					0x000a0502
-					0x77e30303
-					0x70000f03
-					0x001f0000
-				>;
-			};
-
-			timing-20400000 {
-				clock-frequency = <20400000>;
-
-				nvidia,emem-configuration = <
-					0x40020001
-					0x80000012
-					0x00000001
-					0x00000001
-					0x00000002
-					0x00000000
-					0x00000002
-					0x00000001
-					0x00000003
-					0x00000008
-					0x00000003
-					0x00000002
-					0x00000003
-					0x00000006
-					0x06030203
-					0x000a0502
-					0x76230303
-					0x70000f03
-					0x001f0000
-				>;
-			};
-
-			timing-40800000 {
-				clock-frequency = <40800000>;
-
-				nvidia,emem-configuration = <
-					0xa0000001
-					0x80000017
-					0x00000001
-					0x00000001
-					0x00000002
-					0x00000000
-					0x00000002
-					0x00000001
-					0x00000003
-					0x00000008
-					0x00000003
-					0x00000002
-					0x00000003
-					0x00000006
-					0x06030203
-					0x000a0502
-					0x74a30303
-					0x70000f03
-					0x001f0000
-				>;
-			};
-
-			timing-68000000 {
-				clock-frequency = <68000000>;
-
-				nvidia,emem-configuration = <
-					0x00000001
-					0x8000001e
-					0x00000001
-					0x00000001
-					0x00000002
-					0x00000000
-					0x00000002
-					0x00000001
-					0x00000003
-					0x00000008
-					0x00000003
-					0x00000002
-					0x00000003
-					0x00000006
-					0x06030203
-					0x000a0502
-					0x74230403
-					0x70000f03
-					0x001f0000
-				>;
-			};
-
-			timing-102000000 {
-				clock-frequency = <102000000>;
-
-				nvidia,emem-configuration = <
-					0x08000001
-					0x80000026
-					0x00000001
-					0x00000001
-					0x00000003
-					0x00000000
-					0x00000002
-					0x00000001
-					0x00000003
-					0x00000008
-					0x00000003
-					0x00000002
-					0x00000003
-					0x00000006
-					0x06030203
-					0x000a0503
-					0x73c30504
-					0x70000f03
-					0x001f0000
-				>;
-			};
-
-			timing-204000000 {
-				clock-frequency = <204000000>;
-
-				nvidia,emem-configuration = <
-					0x01000003
-					0x80000040
-					0x00000001
-					0x00000001
-					0x00000004
-					0x00000002
-					0x00000003
-					0x00000001
-					0x00000003
-					0x00000008
-					0x00000003
-					0x00000002
-					0x00000004
-					0x00000006
-					0x06040203
-					0x000a0504
-					0x73840a05
-					0x70000f03
-					0x001f0000
-				>;
-			};
-
-			timing-300000000 {
-				clock-frequency = <300000000>;
-
-				nvidia,emem-configuration = <
-					0x08000004
-					0x80000040
-					0x00000001
-					0x00000002
-					0x00000007
-					0x00000004
-					0x00000004
-					0x00000001
-					0x00000002
-					0x00000007
-					0x00000002
-					0x00000002
-					0x00000004
-					0x00000006
-					0x06040202
-					0x000b0607
-					0x77450e08
-					0x70000f03
-					0x001f0000
-				>;
-			};
-
-			timing-396000000 {
-				clock-frequency = <396000000>;
-
-				nvidia,emem-configuration = <
-					0x0f000005
-					0x80000040
-					0x00000001
-					0x00000002
-					0x00000009
-					0x00000005
-					0x00000006
-					0x00000001
-					0x00000002
-					0x00000008
-					0x00000002
-					0x00000002
-					0x00000004
-					0x00000006
-					0x06040202
-					0x000d0709
-					0x7586120a
-					0x70000f03
-					0x001f0000
-				>;
-			};
-
-			timing-528000000 {
-				clock-frequency = <528000000>;
-
-				nvidia,emem-configuration = <
-					0x0f000007
-					0x80000040
-					0x00000002
-					0x00000003
-					0x0000000c
-					0x00000007
-					0x00000008
-					0x00000001
-					0x00000002
-					0x00000009
-					0x00000002
-					0x00000002
-					0x00000005
-					0x00000006
-					0x06050202
-					0x0010090c
-					0x7428180d
-					0x70000f03
-					0x001f0000
-				>;
-			};
-
-			timing-600000000 {
-				clock-frequency = <600000000>;
-
-				nvidia,emem-configuration = <
-					0x00000009
-					0x80000040
-					0x00000003
-					0x00000004
-					0x0000000e
-					0x00000009
-					0x0000000a
-					0x00000001
-					0x00000003
-					0x0000000b
-					0x00000002
-					0x00000002
-					0x00000005
-					0x00000007
-					0x07050202
-					0x00130b0e
-					0x73a91b0f
-					0x70000f03
-					0x001f0000
-				>;
-			};
-
-			timing-792000000 {
-				clock-frequency = <792000000>;
-
-				nvidia,emem-configuration = <
-					0x0e00000b
-					0x80000040
-					0x00000004
-					0x00000005
-					0x00000013
-					0x0000000c
-					0x0000000d
-					0x00000002
-					0x00000003
-					0x0000000c
-					0x00000002
-					0x00000002
-					0x00000006
-					0x00000008
-					0x08060202
-					0x00170e13
-					0x736c2414
-					0x70000f02
-					0x001f0000
-				>;
-			};
-
-			timing-924000000 {
-				clock-frequency = <924000000>;
-
-				nvidia,emem-configuration = <
-					0x0e00000d
-					0x80000040
-					0x00000005
-					0x00000006
-					0x00000016
-					0x0000000e
-					0x0000000f
-					0x00000002
-					0x00000004
-					0x0000000e
-					0x00000002
-					0x00000002
-					0x00000006
-					0x00000009
-					0x09060202
-					0x001a1016
-					0x734e2a17
-					0x70000f02
-					0x001f0000
-				>;
-			};
 		};
 	};
 };
 
 &emc_icc_dvfs_opp_table {
-	/delete-node/ opp@1200000000,1100;
+	/delete-node/ opp-1200000000-1100;
 };
 
 &emc_bw_dfs_opp_table {
-	/delete-node/ opp@1200000000;
+	/delete-node/ opp-1200000000;
 };
diff --git a/dts/src/arm/tegra124-jetson-tk1.dts b/dts/src/arm/tegra124-jetson-tk1.dts
index 35ab296408..28b889e4e3 100644
--- a/dts/src/arm/tegra124-jetson-tk1.dts
+++ b/dts/src/arm/tegra124-jetson-tk1.dts
@@ -72,7 +72,7 @@
 		status = "okay";
 	};
 
-	gpu@0,57000000 {
+	gpu@57000000 {
 		/*
 		 * Node left disabled on purpose - the bootloader will enable
 		 * it after having set the VPR up
@@ -1389,6 +1389,7 @@
 	 */
 	serial@70006000 {
 		compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart";
+		/delete-property/ reg-shift;
 		status = "okay";
 	};
 
@@ -1401,6 +1402,7 @@
 	 */
 	serial@70006040 {
 		compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart";
+		/delete-property/ reg-shift;
 		status = "okay";
 	};
 
@@ -1655,7 +1657,8 @@
 	spi@7000da00 {
 		status = "okay";
 		spi-max-frequency = <25000000>;
-		spi-flash@0 {
+
+		flash@0 {
 			compatible = "winbond,w25q32dw", "jedec,spi-nor";
 			reg = <0>;
 			spi-max-frequency = <20000000>;
@@ -1868,7 +1871,7 @@
 		vbus-supply = <&vdd_usb3_vbus>;
 	};
 
-	clk32k_in: clock@0 {
+	clk32k_in: clock-32k {
 		compatible = "fixed-clock";
 		clock-frequency = <32768>;
 		#clock-cells = <0>;
@@ -1892,7 +1895,7 @@
 		};
 	};
 
-	vdd_mux: regulator@0 {
+	vdd_mux: regulator-mux {
 		compatible = "regulator-fixed";
 		regulator-name = "+VDD_MUX";
 		regulator-min-microvolt = <12000000>;
@@ -1901,7 +1904,7 @@
 		regulator-boot-on;
 	};
 
-	vdd_5v0_sys: regulator@1 {
+	vdd_5v0_sys: regulator-5v0sys {
 		compatible = "regulator-fixed";
 		regulator-name = "+5V_SYS";
 		regulator-min-microvolt = <5000000>;
@@ -1911,7 +1914,7 @@
 		vin-supply = <&vdd_mux>;
 	};
 
-	vdd_3v3_sys: regulator@2 {
+	vdd_3v3_sys: regulator-3v3sys {
 		compatible = "regulator-fixed";
 		regulator-name = "+3.3V_SYS";
 		regulator-min-microvolt = <3300000>;
@@ -1921,7 +1924,7 @@
 		vin-supply = <&vdd_mux>;
 	};
 
-	vdd_3v3_run: regulator@3 {
+	vdd_3v3_run: regulator-3v3run {
 		compatible = "regulator-fixed";
 		regulator-name = "+3.3V_RUN";
 		regulator-min-microvolt = <3300000>;
@@ -1933,7 +1936,7 @@
 		vin-supply = <&vdd_3v3_sys>;
 	};
 
-	vdd_3v3_hdmi: regulator@4 {
+	vdd_3v3_hdmi: regulator-3v3hdmi {
 		compatible = "regulator-fixed";
 		regulator-name = "+3.3V_AVDD_HDMI_AP_GATED";
 		regulator-min-microvolt = <3300000>;
@@ -1941,7 +1944,7 @@
 		vin-supply = <&vdd_3v3_run>;
 	};
 
-	vdd_usb1_vbus: regulator@5 {
+	vdd_usb1_vbus: regulator-usb1 {
 		compatible = "regulator-fixed";
 		regulator-name = "+USB0_VBUS_SW";
 		regulator-min-microvolt = <5000000>;
@@ -1952,7 +1955,7 @@
 		vin-supply = <&vdd_5v0_sys>;
 	};
 
-	vdd_usb3_vbus: regulator@6 {
+	vdd_usb3_vbus: regulator-usb3 {
 		compatible = "regulator-fixed";
 		regulator-name = "+5V_USB_HS";
 		regulator-min-microvolt = <5000000>;
@@ -1963,7 +1966,7 @@
 		vin-supply = <&vdd_5v0_sys>;
 	};
 
-	vdd_3v3_lp0: regulator@7 {
+	vdd_3v3_lp0: regulator-lp0 {
 		compatible = "regulator-fixed";
 		regulator-name = "+3.3V_LP0";
 		regulator-min-microvolt = <3300000>;
@@ -1975,7 +1978,7 @@
 		vin-supply = <&vdd_3v3_sys>;
 	};
 
-	vdd_hdmi_pll: regulator@8 {
+	vdd_hdmi_pll: regulator-hdmipll {
 		compatible = "regulator-fixed";
 		regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL";
 		regulator-min-microvolt = <1050000>;
@@ -1984,7 +1987,7 @@
 		vin-supply = <&vdd_1v05_run>;
 	};
 
-	vdd_5v0_hdmi: regulator@9 {
+	vdd_5v0_hdmi: regulator-hdmicon {
 		compatible = "regulator-fixed";
 		regulator-name = "+5V_HDMI_CON";
 		regulator-min-microvolt = <5000000>;
@@ -1995,7 +1998,7 @@
 	};
 
 	/* Molex power connector */
-	vdd_5v0_sata: regulator@10 {
+	vdd_5v0_sata: regulator-5v0sata {
 		compatible = "regulator-fixed";
 		regulator-name = "+5V_SATA";
 		regulator-min-microvolt = <5000000>;
@@ -2005,7 +2008,7 @@
 		vin-supply = <&vdd_5v0_sys>;
 	};
 
-	vdd_12v0_sata: regulator@11 {
+	vdd_12v0_sata: regulator-12v0sata {
 		compatible = "regulator-fixed";
 		regulator-name = "+12V_SATA";
 		regulator-min-microvolt = <12000000>;
@@ -2044,7 +2047,7 @@
 	};
 
 	thermal-zones {
-		cpu {
+		cpu-thermal {
 			trips {
 				cpu-shutdown-trip {
 					temperature = <101000>;
@@ -2054,7 +2057,7 @@
 			};
 		};
 
-		mem {
+		mem-thermal {
 			trips {
 				mem-shutdown-trip {
 					temperature = <101000>;
@@ -2064,7 +2067,7 @@
 			};
 		};
 
-		gpu {
+		gpu-thermal {
 			trips {
 				gpu-shutdown-trip {
 					temperature = <101000>;
diff --git a/dts/src/arm/tegra124-nyan-big-emc.dtsi b/dts/src/arm/tegra124-nyan-big-emc.dtsi
index a0f56cc9da..31b2e26c69 100644
--- a/dts/src/arm/tegra124-nyan-big-emc.dtsi
+++ b/dts/src/arm/tegra124-nyan-big-emc.dtsi
@@ -14,60 +14,70 @@
 				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
 				clock-names = "emc-parent";
 			};
+
 			timing-20400000 {
 				clock-frequency = <20400000>;
 				nvidia,parent-clock-frequency = <408000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
 				clock-names = "emc-parent";
 			};
+
 			timing-40800000 {
 				clock-frequency = <40800000>;
 				nvidia,parent-clock-frequency = <408000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
 				clock-names = "emc-parent";
 			};
+
 			timing-68000000 {
 				clock-frequency = <68000000>;
 				nvidia,parent-clock-frequency = <408000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
 				clock-names = "emc-parent";
 			};
+
 			timing-102000000 {
 				clock-frequency = <102000000>;
 				nvidia,parent-clock-frequency = <408000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
 				clock-names = "emc-parent";
 			};
+
 			timing-204000000 {
 				clock-frequency = <204000000>;
 				nvidia,parent-clock-frequency = <408000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
 				clock-names = "emc-parent";
 			};
+
 			timing-300000000 {
 				clock-frequency = <300000000>;
 				nvidia,parent-clock-frequency = <600000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_C>;
 				clock-names = "emc-parent";
 			};
+
 			timing-396000000 {
 				clock-frequency = <396000000>;
 				nvidia,parent-clock-frequency = <792000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_M>;
 				clock-names = "emc-parent";
 			};
+
 			timing-528000000 {
 				clock-frequency = <528000000>;
 				nvidia,parent-clock-frequency = <528000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_M_UD>;
 				clock-names = "emc-parent";
 			};
+
 			timing-600000000 {
 				clock-frequency = <600000000>;
 				nvidia,parent-clock-frequency = <600000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_C_UD>;
 				clock-names = "emc-parent";
 			};
+
 			timing-792000000 {
 				clock-frequency = <792000000>;
 				nvidia,parent-clock-frequency = <792000000>;
@@ -85,60 +95,70 @@
 				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
 				clock-names = "emc-parent";
 			};
+
 			timing-20400000 {
 				clock-frequency = <20400000>;
 				nvidia,parent-clock-frequency = <408000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
 				clock-names = "emc-parent";
 			};
+
 			timing-40800000 {
 				clock-frequency = <40800000>;
 				nvidia,parent-clock-frequency = <408000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
 				clock-names = "emc-parent";
 			};
+
 			timing-68000000 {
 				clock-frequency = <68000000>;
 				nvidia,parent-clock-frequency = <408000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
 				clock-names = "emc-parent";
 			};
+
 			timing-102000000 {
 				clock-frequency = <102000000>;
 				nvidia,parent-clock-frequency = <408000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
 				clock-names = "emc-parent";
 			};
+
 			timing-204000000 {
 				clock-frequency = <204000000>;
 				nvidia,parent-clock-frequency = <408000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
 				clock-names = "emc-parent";
 			};
+
 			timing-300000000 {
 				clock-frequency = <300000000>;
 				nvidia,parent-clock-frequency = <600000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_C>;
 				clock-names = "emc-parent";
 			};
+
 			timing-396000000 {
 				clock-frequency = <396000000>;
 				nvidia,parent-clock-frequency = <792000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_M>;
 				clock-names = "emc-parent";
 			};
+
 			timing-528000000 {
 				clock-frequency = <528000000>;
 				nvidia,parent-clock-frequency = <528000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_M_UD>;
 				clock-names = "emc-parent";
 			};
+
 			timing-600000000 {
 				clock-frequency = <600000000>;
 				nvidia,parent-clock-frequency = <600000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_C_UD>;
 				clock-names = "emc-parent";
 			};
+
 			timing-792000000 {
 				clock-frequency = <792000000>;
 				nvidia,parent-clock-frequency = <792000000>;
@@ -156,60 +176,70 @@
 				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
 				clock-names = "emc-parent";
 			};
+
 			timing-20400000 {
 				clock-frequency = <20400000>;
 				nvidia,parent-clock-frequency = <408000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
 				clock-names = "emc-parent";
 			};
+
 			timing-40800000 {
 				clock-frequency = <40800000>;
 				nvidia,parent-clock-frequency = <408000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
 				clock-names = "emc-parent";
 			};
+
 			timing-68000000 {
 				clock-frequency = <68000000>;
 				nvidia,parent-clock-frequency = <408000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
 				clock-names = "emc-parent";
 			};
+
 			timing-102000000 {
 				clock-frequency = <102000000>;
 				nvidia,parent-clock-frequency = <408000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
 				clock-names = "emc-parent";
 			};
+
 			timing-204000000 {
 				clock-frequency = <204000000>;
 				nvidia,parent-clock-frequency = <408000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
 				clock-names = "emc-parent";
 			};
+
 			timing-300000000 {
 				clock-frequency = <300000000>;
 				nvidia,parent-clock-frequency = <600000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_C>;
 				clock-names = "emc-parent";
 			};
+
 			timing-396000000 {
 				clock-frequency = <396000000>;
 				nvidia,parent-clock-frequency = <792000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_M>;
 				clock-names = "emc-parent";
 			};
+
 			timing-528000000 {
 				clock-frequency = <528000000>;
 				nvidia,parent-clock-frequency = <528000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_M_UD>;
 				clock-names = "emc-parent";
 			};
+
 			timing-600000000 {
 				clock-frequency = <600000000>;
 				nvidia,parent-clock-frequency = <600000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_C_UD>;
 				clock-names = "emc-parent";
 			};
+
 			timing-792000000 {
 				clock-frequency = <792000000>;
 				nvidia,parent-clock-frequency = <792000000>;
@@ -219,6 +249,878 @@
 		};
 	};
 
+	memory-controller@70019000 {
+		emc-timings-1 {
+			nvidia,ram-code = <1>;
+
+			timing-12750000 {
+				clock-frequency = <12750000>;
+
+				nvidia,emem-configuration = <
+					0x40040001 /* MC_EMEM_ARB_CFG */
+					0x8000000a /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0402 /* MC_EMEM_ARB_DA_COVERS */
+					0x77e30303 /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-20400000 {
+				clock-frequency = <20400000>;
+
+				nvidia,emem-configuration = <
+					0x40020001 /* MC_EMEM_ARB_CFG */
+					0x80000012 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0402 /* MC_EMEM_ARB_DA_COVERS */
+					0x76230303 /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-40800000 {
+				clock-frequency = <40800000>;
+
+				nvidia,emem-configuration = <
+					0xa0000001 /* MC_EMEM_ARB_CFG */
+					0x80000017 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0402 /* MC_EMEM_ARB_DA_COVERS */
+					0x74a30303 /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-68000000 {
+				clock-frequency = <68000000>;
+
+				nvidia,emem-configuration = <
+					0x00000001 /* MC_EMEM_ARB_CFG */
+					0x8000001e /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0402 /* MC_EMEM_ARB_DA_COVERS */
+					0x74230403 /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = <
+					0x08000001 /* MC_EMEM_ARB_CFG */
+					0x80000026 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0403 /* MC_EMEM_ARB_DA_COVERS */
+					0x73c30504 /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = <
+					0x01000003 /* MC_EMEM_ARB_CFG */
+					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000005 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000004 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000004 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06040203 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0405 /* MC_EMEM_ARB_DA_COVERS */
+					0x73840a06 /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-300000000 {
+				clock-frequency = <300000000>;
+
+				nvidia,emem-configuration = <
+					0x08000004 /* MC_EMEM_ARB_CFG */
+					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000007 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000004 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000005 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000007 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000004 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06040202 /* MC_EMEM_ARB_DA_TURNS */
+					0x000b0607 /* MC_EMEM_ARB_DA_COVERS */
+					0x77450e08 /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-396000000 {
+				clock-frequency = <396000000>;
+
+				nvidia,emem-configuration = <
+					0x0f000005 /* MC_EMEM_ARB_CFG */
+					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000009 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000005 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000007 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000004 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06040202 /* MC_EMEM_ARB_DA_TURNS */
+					0x000d0709 /* MC_EMEM_ARB_DA_COVERS */
+					0x7586120a /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-528000000 {
+				clock-frequency = <528000000>;
+
+				nvidia,emem-configuration = <
+					0x0f000007 /* MC_EMEM_ARB_CFG */
+					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RP */
+					0x0000000d /* MC_EMEM_ARB_TIMING_RC */
+					0x00000008 /* MC_EMEM_ARB_TIMING_RAS */
+					0x0000000a /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000009 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000005 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06050202 /* MC_EMEM_ARB_DA_TURNS */
+					0x0010090d /* MC_EMEM_ARB_DA_COVERS */
+					0x7428180e /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-600000000 {
+				clock-frequency = <600000000>;
+
+				nvidia,emem-configuration = <
+					0x00000009 /* MC_EMEM_ARB_CFG */
+					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000004 /* MC_EMEM_ARB_TIMING_RP */
+					0x0000000e /* MC_EMEM_ARB_TIMING_RC */
+					0x00000009 /* MC_EMEM_ARB_TIMING_RAS */
+					0x0000000b /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x0000000b /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000005 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000007 /* MC_EMEM_ARB_TIMING_W2R */
+					0x07050202 /* MC_EMEM_ARB_DA_TURNS */
+					0x00130b0e /* MC_EMEM_ARB_DA_COVERS */
+					0x73a91b0f /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-792000000 {
+				clock-frequency = <792000000>;
+
+				nvidia,emem-configuration = <
+					0x0e00000b /* MC_EMEM_ARB_CFG */
+					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000004 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000005 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000013 /* MC_EMEM_ARB_TIMING_RC */
+					0x0000000c /* MC_EMEM_ARB_TIMING_RAS */
+					0x0000000f /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x0000000c /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000008 /* MC_EMEM_ARB_TIMING_W2R */
+					0x08060202 /* MC_EMEM_ARB_DA_TURNS */
+					0x00160d13 /* MC_EMEM_ARB_DA_COVERS */
+					0x734c2414 /* MC_EMEM_ARB_MISC0 */
+					0x70000f02 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+		};
+
+		emc-timings-4 {
+			nvidia,ram-code = <4>;
+
+			timing-12750000 {
+				clock-frequency = <12750000>;
+
+				nvidia,emem-configuration = <
+					0x40040001 /* MC_EMEM_ARB_CFG */
+					0x8000000a /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0502 /* MC_EMEM_ARB_DA_COVERS */
+					0x77e30303 /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-20400000 {
+				clock-frequency = <20400000>;
+
+				nvidia,emem-configuration = <
+					0x40020001 /* MC_EMEM_ARB_CFG */
+					0x80000012 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0502 /* MC_EMEM_ARB_DA_COVERS */
+					0x77430303 /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-40800000 {
+				clock-frequency = <40800000>;
+
+				nvidia,emem-configuration = <
+					0xa0000001 /* MC_EMEM_ARB_CFG */
+					0x80000017 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0502 /* MC_EMEM_ARB_DA_COVERS */
+					0x75e30303 /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-68000000 {
+				clock-frequency = <68000000>;
+
+				nvidia,emem-configuration = <
+					0x00000001 /* MC_EMEM_ARB_CFG */
+					0x8000001e /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0502 /* MC_EMEM_ARB_DA_COVERS */
+					0x75430403 /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = <
+					0x08000001 /* MC_EMEM_ARB_CFG */
+					0x80000026 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0503 /* MC_EMEM_ARB_DA_COVERS */
+					0x74e30504 /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = <
+					0x01000003 /* MC_EMEM_ARB_CFG */
+					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000004 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000004 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000004 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06040203 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0504 /* MC_EMEM_ARB_DA_COVERS */
+					0x74a40a05 /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-300000000 {
+				clock-frequency = <300000000>;
+
+				nvidia,emem-configuration = <
+					0x08000004 /* MC_EMEM_ARB_CFG */
+					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000007 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000004 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000005 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000007 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000004 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06040202 /* MC_EMEM_ARB_DA_TURNS */
+					0x000b0607 /* MC_EMEM_ARB_DA_COVERS */
+					0x77450e08 /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-396000000 {
+				clock-frequency = <396000000>;
+
+				nvidia,emem-configuration = <
+					0x0f000005 /* MC_EMEM_ARB_CFG */
+					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000009 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000005 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000007 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000004 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06040202 /* MC_EMEM_ARB_DA_TURNS */
+					0x000d0709 /* MC_EMEM_ARB_DA_COVERS */
+					0x7586120a /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-528000000 {
+				clock-frequency = <528000000>;
+
+				nvidia,emem-configuration = <
+					0x0f000007 /* MC_EMEM_ARB_CFG */
+					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RP */
+					0x0000000c /* MC_EMEM_ARB_TIMING_RC */
+					0x00000007 /* MC_EMEM_ARB_TIMING_RAS */
+					0x0000000a /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000009 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000005 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06050202 /* MC_EMEM_ARB_DA_TURNS */
+					0x0010090c /* MC_EMEM_ARB_DA_COVERS */
+					0x7488180d /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-600000000 {
+				clock-frequency = <600000000>;
+
+				nvidia,emem-configuration = <
+					0x00000009 /* MC_EMEM_ARB_CFG */
+					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000004 /* MC_EMEM_ARB_TIMING_RP */
+					0x0000000e /* MC_EMEM_ARB_TIMING_RC */
+					0x00000009 /* MC_EMEM_ARB_TIMING_RAS */
+					0x0000000b /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x0000000b /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000005 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000007 /* MC_EMEM_ARB_TIMING_W2R */
+					0x07050202 /* MC_EMEM_ARB_DA_TURNS */
+					0x00130b0e /* MC_EMEM_ARB_DA_COVERS */
+					0x74691b0f /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-792000000 {
+				clock-frequency = <792000000>;
+
+				nvidia,emem-configuration = <
+					0x0e00000b /* MC_EMEM_ARB_CFG */
+					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000004 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000005 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000013 /* MC_EMEM_ARB_TIMING_RC */
+					0x0000000c /* MC_EMEM_ARB_TIMING_RAS */
+					0x0000000f /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x0000000c /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000008 /* MC_EMEM_ARB_TIMING_W2R */
+					0x08060202 /* MC_EMEM_ARB_DA_TURNS */
+					0x00170e13 /* MC_EMEM_ARB_DA_COVERS */
+					0x746c2414 /* MC_EMEM_ARB_MISC0 */
+					0x70000f02 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+		};
+
+		emc-timings-6 {
+			nvidia,ram-code = <6>;
+
+			timing-12750000 {
+				clock-frequency = <12750000>;
+
+				nvidia,emem-configuration = <
+					0x40040001 /* MC_EMEM_ARB_CFG */
+					0x8000000a /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0402 /* MC_EMEM_ARB_DA_COVERS */
+					0x77e30303 /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-20400000 {
+				clock-frequency = <20400000>;
+
+				nvidia,emem-configuration = <
+					0x40020001 /* MC_EMEM_ARB_CFG */
+					0x80000012 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0402 /* MC_EMEM_ARB_DA_COVERS */
+					0x76230303 /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-40800000 {
+				clock-frequency = <40800000>;
+
+				nvidia,emem-configuration = <
+					0xa0000001 /* MC_EMEM_ARB_CFG */
+					0x80000017 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0402 /* MC_EMEM_ARB_DA_COVERS */
+					0x74a30303 /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-68000000 {
+				clock-frequency = <68000000>;
+
+				nvidia,emem-configuration = <
+					0x00000001 /* MC_EMEM_ARB_CFG */
+					0x8000001e /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0402 /* MC_EMEM_ARB_DA_COVERS */
+					0x74230403 /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = <
+					0x08000001 /* MC_EMEM_ARB_CFG */
+					0x80000026 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0403 /* MC_EMEM_ARB_DA_COVERS */
+					0x73c30504 /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = <
+					0x01000003 /* MC_EMEM_ARB_CFG */
+					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000005 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000004 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000004 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06040203 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0405 /* MC_EMEM_ARB_DA_COVERS */
+					0x73840a06 /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-300000000 {
+				clock-frequency = <300000000>;
+
+				nvidia,emem-configuration = <
+					0x08000004 /* MC_EMEM_ARB_CFG */
+					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000007 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000004 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000005 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000007 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000004 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06040202 /* MC_EMEM_ARB_DA_TURNS */
+					0x000b0607 /* MC_EMEM_ARB_DA_COVERS */
+					0x77450e08 /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-396000000 {
+				clock-frequency = <396000000>;
+
+				nvidia,emem-configuration = <
+					0x0f000005 /* MC_EMEM_ARB_CFG */
+					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000009 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000005 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000007 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000004 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06040202 /* MC_EMEM_ARB_DA_TURNS */
+					0x000d0709 /* MC_EMEM_ARB_DA_COVERS */
+					0x7586120a /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-528000000 {
+				clock-frequency = <528000000>;
+
+				nvidia,emem-configuration = <
+					0x0f000007 /* MC_EMEM_ARB_CFG */
+					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RP */
+					0x0000000d /* MC_EMEM_ARB_TIMING_RC */
+					0x00000008 /* MC_EMEM_ARB_TIMING_RAS */
+					0x0000000a /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000009 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000005 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06050202 /* MC_EMEM_ARB_DA_TURNS */
+					0x0010090d /* MC_EMEM_ARB_DA_COVERS */
+					0x7428180e /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-600000000 {
+				clock-frequency = <600000000>;
+
+				nvidia,emem-configuration = <
+					0x00000009 /* MC_EMEM_ARB_CFG */
+					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000004 /* MC_EMEM_ARB_TIMING_RP */
+					0x0000000e /* MC_EMEM_ARB_TIMING_RC */
+					0x00000009 /* MC_EMEM_ARB_TIMING_RAS */
+					0x0000000b /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x0000000b /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000005 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000007 /* MC_EMEM_ARB_TIMING_W2R */
+					0x07050202 /* MC_EMEM_ARB_DA_TURNS */
+					0x00130b0e /* MC_EMEM_ARB_DA_COVERS */
+					0x73a91b0f /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-792000000 {
+				clock-frequency = <792000000>;
+
+				nvidia,emem-configuration = <
+					0x0e00000b /* MC_EMEM_ARB_CFG */
+					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000004 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000005 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000013 /* MC_EMEM_ARB_TIMING_RC */
+					0x0000000c /* MC_EMEM_ARB_TIMING_RAS */
+					0x0000000f /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x0000000c /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000008 /* MC_EMEM_ARB_TIMING_W2R */
+					0x08060202 /* MC_EMEM_ARB_DA_TURNS */
+					0x00160d13 /* MC_EMEM_ARB_DA_COVERS */
+					0x734c2414 /* MC_EMEM_ARB_MISC0 */
+					0x70000f02 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+		};
+	};
+
 	external-memory-controller@7001b000 {
 		emc-timings-1 {
 			nvidia,ram-code = <1>;
@@ -5776,886 +6678,14 @@
 			};
 		};
 	};
-
-	memory-controller@70019000 {
-		emc-timings-1 {
-			nvidia,ram-code = <1>;
-
-			timing-12750000 {
-				clock-frequency = <12750000>;
-
-				nvidia,emem-configuration = <
-					0x40040001 /* MC_EMEM_ARB_CFG */
-					0x8000000a /* MC_EMEM_ARB_OUTSTANDING_REQ */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
-					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
-					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
-					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
-					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
-					0x000a0402 /* MC_EMEM_ARB_DA_COVERS */
-					0x77e30303 /* MC_EMEM_ARB_MISC0 */
-					0x70000f03 /* MC_EMEM_ARB_MISC1 */
-					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-				>;
-			};
-
-			timing-20400000 {
-				clock-frequency = <20400000>;
-
-				nvidia,emem-configuration = <
-					0x40020001 /* MC_EMEM_ARB_CFG */
-					0x80000012 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
-					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
-					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
-					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
-					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
-					0x000a0402 /* MC_EMEM_ARB_DA_COVERS */
-					0x76230303 /* MC_EMEM_ARB_MISC0 */
-					0x70000f03 /* MC_EMEM_ARB_MISC1 */
-					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-				>;
-			};
-
-			timing-40800000 {
-				clock-frequency = <40800000>;
-
-				nvidia,emem-configuration = <
-					0xa0000001 /* MC_EMEM_ARB_CFG */
-					0x80000017 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
-					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
-					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
-					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
-					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
-					0x000a0402 /* MC_EMEM_ARB_DA_COVERS */
-					0x74a30303 /* MC_EMEM_ARB_MISC0 */
-					0x70000f03 /* MC_EMEM_ARB_MISC1 */
-					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-				>;
-			};
-
-			timing-68000000 {
-				clock-frequency = <68000000>;
-
-				nvidia,emem-configuration = <
-					0x00000001 /* MC_EMEM_ARB_CFG */
-					0x8000001e /* MC_EMEM_ARB_OUTSTANDING_REQ */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
-					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
-					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
-					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
-					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
-					0x000a0402 /* MC_EMEM_ARB_DA_COVERS */
-					0x74230403 /* MC_EMEM_ARB_MISC0 */
-					0x70000f03 /* MC_EMEM_ARB_MISC1 */
-					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-				>;
-			};
-
-			timing-102000000 {
-				clock-frequency = <102000000>;
-
-				nvidia,emem-configuration = <
-					0x08000001 /* MC_EMEM_ARB_CFG */
-					0x80000026 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
-					0x00000003 /* MC_EMEM_ARB_TIMING_RC */
-					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
-					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
-					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
-					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
-					0x000a0403 /* MC_EMEM_ARB_DA_COVERS */
-					0x73c30504 /* MC_EMEM_ARB_MISC0 */
-					0x70000f03 /* MC_EMEM_ARB_MISC1 */
-					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-				>;
-			};
-
-			timing-204000000 {
-				clock-frequency = <204000000>;
-
-				nvidia,emem-configuration = <
-					0x01000003 /* MC_EMEM_ARB_CFG */
-					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
-					0x00000005 /* MC_EMEM_ARB_TIMING_RC */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RAS */
-					0x00000004 /* MC_EMEM_ARB_TIMING_FAW */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
-					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-					0x00000004 /* MC_EMEM_ARB_TIMING_R2W */
-					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-					0x06040203 /* MC_EMEM_ARB_DA_TURNS */
-					0x000a0405 /* MC_EMEM_ARB_DA_COVERS */
-					0x73840a06 /* MC_EMEM_ARB_MISC0 */
-					0x70000f03 /* MC_EMEM_ARB_MISC1 */
-					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-				>;
-			};
-
-			timing-300000000 {
-				clock-frequency = <300000000>;
-
-				nvidia,emem-configuration = <
-					0x08000004 /* MC_EMEM_ARB_CFG */
-					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RP */
-					0x00000007 /* MC_EMEM_ARB_TIMING_RC */
-					0x00000004 /* MC_EMEM_ARB_TIMING_RAS */
-					0x00000005 /* MC_EMEM_ARB_TIMING_FAW */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-					0x00000007 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
-					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-					0x00000004 /* MC_EMEM_ARB_TIMING_R2W */
-					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-					0x06040202 /* MC_EMEM_ARB_DA_TURNS */
-					0x000b0607 /* MC_EMEM_ARB_DA_COVERS */
-					0x77450e08 /* MC_EMEM_ARB_MISC0 */
-					0x70000f03 /* MC_EMEM_ARB_MISC1 */
-					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-				>;
-			};
-
-			timing-396000000 {
-				clock-frequency = <396000000>;
-
-				nvidia,emem-configuration = <
-					0x0f000005 /* MC_EMEM_ARB_CFG */
-					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RP */
-					0x00000009 /* MC_EMEM_ARB_TIMING_RC */
-					0x00000005 /* MC_EMEM_ARB_TIMING_RAS */
-					0x00000007 /* MC_EMEM_ARB_TIMING_FAW */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
-					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-					0x00000004 /* MC_EMEM_ARB_TIMING_R2W */
-					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-					0x06040202 /* MC_EMEM_ARB_DA_TURNS */
-					0x000d0709 /* MC_EMEM_ARB_DA_COVERS */
-					0x7586120a /* MC_EMEM_ARB_MISC0 */
-					0x70000f03 /* MC_EMEM_ARB_MISC1 */
-					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-				>;
-			};
-
-			timing-528000000 {
-				clock-frequency = <528000000>;
-
-				nvidia,emem-configuration = <
-					0x0f000007 /* MC_EMEM_ARB_CFG */
-					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RCD */
-					0x00000003 /* MC_EMEM_ARB_TIMING_RP */
-					0x0000000d /* MC_EMEM_ARB_TIMING_RC */
-					0x00000008 /* MC_EMEM_ARB_TIMING_RAS */
-					0x0000000a /* MC_EMEM_ARB_TIMING_FAW */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-					0x00000009 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
-					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-					0x00000005 /* MC_EMEM_ARB_TIMING_R2W */
-					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-					0x06050202 /* MC_EMEM_ARB_DA_TURNS */
-					0x0010090d /* MC_EMEM_ARB_DA_COVERS */
-					0x7428180e /* MC_EMEM_ARB_MISC0 */
-					0x70000f03 /* MC_EMEM_ARB_MISC1 */
-					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-				>;
-			};
-
-			timing-600000000 {
-				clock-frequency = <600000000>;
-
-				nvidia,emem-configuration = <
-					0x00000009 /* MC_EMEM_ARB_CFG */
-					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-					0x00000003 /* MC_EMEM_ARB_TIMING_RCD */
-					0x00000004 /* MC_EMEM_ARB_TIMING_RP */
-					0x0000000e /* MC_EMEM_ARB_TIMING_RC */
-					0x00000009 /* MC_EMEM_ARB_TIMING_RAS */
-					0x0000000b /* MC_EMEM_ARB_TIMING_FAW */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-					0x0000000b /* MC_EMEM_ARB_TIMING_WAP2PRE */
-					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
-					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-					0x00000005 /* MC_EMEM_ARB_TIMING_R2W */
-					0x00000007 /* MC_EMEM_ARB_TIMING_W2R */
-					0x07050202 /* MC_EMEM_ARB_DA_TURNS */
-					0x00130b0e /* MC_EMEM_ARB_DA_COVERS */
-					0x73a91b0f /* MC_EMEM_ARB_MISC0 */
-					0x70000f03 /* MC_EMEM_ARB_MISC1 */
-					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-				>;
-			};
-
-			timing-792000000 {
-				clock-frequency = <792000000>;
-
-				nvidia,emem-configuration = <
-					0x0e00000b /* MC_EMEM_ARB_CFG */
-					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-					0x00000004 /* MC_EMEM_ARB_TIMING_RCD */
-					0x00000005 /* MC_EMEM_ARB_TIMING_RP */
-					0x00000013 /* MC_EMEM_ARB_TIMING_RC */
-					0x0000000c /* MC_EMEM_ARB_TIMING_RAS */
-					0x0000000f /* MC_EMEM_ARB_TIMING_FAW */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RRD */
-					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-					0x0000000c /* MC_EMEM_ARB_TIMING_WAP2PRE */
-					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
-					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-					0x00000006 /* MC_EMEM_ARB_TIMING_R2W */
-					0x00000008 /* MC_EMEM_ARB_TIMING_W2R */
-					0x08060202 /* MC_EMEM_ARB_DA_TURNS */
-					0x00160d13 /* MC_EMEM_ARB_DA_COVERS */
-					0x734c2414 /* MC_EMEM_ARB_MISC0 */
-					0x70000f02 /* MC_EMEM_ARB_MISC1 */
-					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-				>;
-			};
-		};
-
-		emc-timings-4 {
-			nvidia,ram-code = <4>;
-
-			timing-12750000 {
-				clock-frequency = <12750000>;
-
-				nvidia,emem-configuration = <
-					0x40040001 /* MC_EMEM_ARB_CFG */
-					0x8000000a /* MC_EMEM_ARB_OUTSTANDING_REQ */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
-					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
-					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
-					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
-					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
-					0x000a0502 /* MC_EMEM_ARB_DA_COVERS */
-					0x77e30303 /* MC_EMEM_ARB_MISC0 */
-					0x70000f03 /* MC_EMEM_ARB_MISC1 */
-					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-				>;
-			};
-
-			timing-20400000 {
-				clock-frequency = <20400000>;
-
-				nvidia,emem-configuration = <
-					0x40020001 /* MC_EMEM_ARB_CFG */
-					0x80000012 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
-					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
-					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
-					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
-					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
-					0x000a0502 /* MC_EMEM_ARB_DA_COVERS */
-					0x77430303 /* MC_EMEM_ARB_MISC0 */
-					0x70000f03 /* MC_EMEM_ARB_MISC1 */
-					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-				>;
-			};
-
-			timing-40800000 {
-				clock-frequency = <40800000>;
-
-				nvidia,emem-configuration = <
-					0xa0000001 /* MC_EMEM_ARB_CFG */
-					0x80000017 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
-					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
-					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
-					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
-					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
-					0x000a0502 /* MC_EMEM_ARB_DA_COVERS */
-					0x75e30303 /* MC_EMEM_ARB_MISC0 */
-					0x70000f03 /* MC_EMEM_ARB_MISC1 */
-					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-				>;
-			};
-
-			timing-68000000 {
-				clock-frequency = <68000000>;
-
-				nvidia,emem-configuration = <
-					0x00000001 /* MC_EMEM_ARB_CFG */
-					0x8000001e /* MC_EMEM_ARB_OUTSTANDING_REQ */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
-					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
-					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
-					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
-					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
-					0x000a0502 /* MC_EMEM_ARB_DA_COVERS */
-					0x75430403 /* MC_EMEM_ARB_MISC0 */
-					0x70000f03 /* MC_EMEM_ARB_MISC1 */
-					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-				>;
-			};
-
-			timing-102000000 {
-				clock-frequency = <102000000>;
-
-				nvidia,emem-configuration = <
-					0x08000001 /* MC_EMEM_ARB_CFG */
-					0x80000026 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
-					0x00000003 /* MC_EMEM_ARB_TIMING_RC */
-					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
-					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
-					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
-					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
-					0x000a0503 /* MC_EMEM_ARB_DA_COVERS */
-					0x74e30504 /* MC_EMEM_ARB_MISC0 */
-					0x70000f03 /* MC_EMEM_ARB_MISC1 */
-					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-				>;
-			};
-
-			timing-204000000 {
-				clock-frequency = <204000000>;
-
-				nvidia,emem-configuration = <
-					0x01000003 /* MC_EMEM_ARB_CFG */
-					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
-					0x00000004 /* MC_EMEM_ARB_TIMING_RC */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RAS */
-					0x00000004 /* MC_EMEM_ARB_TIMING_FAW */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
-					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-					0x00000004 /* MC_EMEM_ARB_TIMING_R2W */
-					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-					0x06040203 /* MC_EMEM_ARB_DA_TURNS */
-					0x000a0504 /* MC_EMEM_ARB_DA_COVERS */
-					0x74a40a05 /* MC_EMEM_ARB_MISC0 */
-					0x70000f03 /* MC_EMEM_ARB_MISC1 */
-					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-				>;
-			};
-
-			timing-300000000 {
-				clock-frequency = <300000000>;
-
-				nvidia,emem-configuration = <
-					0x08000004 /* MC_EMEM_ARB_CFG */
-					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RP */
-					0x00000007 /* MC_EMEM_ARB_TIMING_RC */
-					0x00000004 /* MC_EMEM_ARB_TIMING_RAS */
-					0x00000005 /* MC_EMEM_ARB_TIMING_FAW */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-					0x00000007 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
-					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-					0x00000004 /* MC_EMEM_ARB_TIMING_R2W */
-					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-					0x06040202 /* MC_EMEM_ARB_DA_TURNS */
-					0x000b0607 /* MC_EMEM_ARB_DA_COVERS */
-					0x77450e08 /* MC_EMEM_ARB_MISC0 */
-					0x70000f03 /* MC_EMEM_ARB_MISC1 */
-					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-				>;
-			};
-
-			timing-396000000 {
-				clock-frequency = <396000000>;
-
-				nvidia,emem-configuration = <
-					0x0f000005 /* MC_EMEM_ARB_CFG */
-					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RP */
-					0x00000009 /* MC_EMEM_ARB_TIMING_RC */
-					0x00000005 /* MC_EMEM_ARB_TIMING_RAS */
-					0x00000007 /* MC_EMEM_ARB_TIMING_FAW */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
-					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-					0x00000004 /* MC_EMEM_ARB_TIMING_R2W */
-					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-					0x06040202 /* MC_EMEM_ARB_DA_TURNS */
-					0x000d0709 /* MC_EMEM_ARB_DA_COVERS */
-					0x7586120a /* MC_EMEM_ARB_MISC0 */
-					0x70000f03 /* MC_EMEM_ARB_MISC1 */
-					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-				>;
-			};
-
-			timing-528000000 {
-				clock-frequency = <528000000>;
-
-				nvidia,emem-configuration = <
-					0x0f000007 /* MC_EMEM_ARB_CFG */
-					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RCD */
-					0x00000003 /* MC_EMEM_ARB_TIMING_RP */
-					0x0000000c /* MC_EMEM_ARB_TIMING_RC */
-					0x00000007 /* MC_EMEM_ARB_TIMING_RAS */
-					0x0000000a /* MC_EMEM_ARB_TIMING_FAW */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-					0x00000009 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
-					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-					0x00000005 /* MC_EMEM_ARB_TIMING_R2W */
-					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-					0x06050202 /* MC_EMEM_ARB_DA_TURNS */
-					0x0010090c /* MC_EMEM_ARB_DA_COVERS */
-					0x7488180d /* MC_EMEM_ARB_MISC0 */
-					0x70000f03 /* MC_EMEM_ARB_MISC1 */
-					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-				>;
-			};
-
-			timing-600000000 {
-				clock-frequency = <600000000>;
-
-				nvidia,emem-configuration = <
-					0x00000009 /* MC_EMEM_ARB_CFG */
-					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-					0x00000003 /* MC_EMEM_ARB_TIMING_RCD */
-					0x00000004 /* MC_EMEM_ARB_TIMING_RP */
-					0x0000000e /* MC_EMEM_ARB_TIMING_RC */
-					0x00000009 /* MC_EMEM_ARB_TIMING_RAS */
-					0x0000000b /* MC_EMEM_ARB_TIMING_FAW */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-					0x0000000b /* MC_EMEM_ARB_TIMING_WAP2PRE */
-					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
-					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-					0x00000005 /* MC_EMEM_ARB_TIMING_R2W */
-					0x00000007 /* MC_EMEM_ARB_TIMING_W2R */
-					0x07050202 /* MC_EMEM_ARB_DA_TURNS */
-					0x00130b0e /* MC_EMEM_ARB_DA_COVERS */
-					0x74691b0f /* MC_EMEM_ARB_MISC0 */
-					0x70000f03 /* MC_EMEM_ARB_MISC1 */
-					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-				>;
-			};
-
-			timing-792000000 {
-				clock-frequency = <792000000>;
-
-				nvidia,emem-configuration = <
-					0x0e00000b /* MC_EMEM_ARB_CFG */
-					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-					0x00000004 /* MC_EMEM_ARB_TIMING_RCD */
-					0x00000005 /* MC_EMEM_ARB_TIMING_RP */
-					0x00000013 /* MC_EMEM_ARB_TIMING_RC */
-					0x0000000c /* MC_EMEM_ARB_TIMING_RAS */
-					0x0000000f /* MC_EMEM_ARB_TIMING_FAW */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RRD */
-					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-					0x0000000c /* MC_EMEM_ARB_TIMING_WAP2PRE */
-					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
-					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-					0x00000006 /* MC_EMEM_ARB_TIMING_R2W */
-					0x00000008 /* MC_EMEM_ARB_TIMING_W2R */
-					0x08060202 /* MC_EMEM_ARB_DA_TURNS */
-					0x00170e13 /* MC_EMEM_ARB_DA_COVERS */
-					0x746c2414 /* MC_EMEM_ARB_MISC0 */
-					0x70000f02 /* MC_EMEM_ARB_MISC1 */
-					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-				>;
-			};
-		};
-
-		emc-timings-6 {
-			nvidia,ram-code = <6>;
-
-			timing-12750000 {
-				clock-frequency = <12750000>;
-
-				nvidia,emem-configuration = <
-					0x40040001 /* MC_EMEM_ARB_CFG */
-					0x8000000a /* MC_EMEM_ARB_OUTSTANDING_REQ */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
-					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
-					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
-					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
-					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
-					0x000a0402 /* MC_EMEM_ARB_DA_COVERS */
-					0x77e30303 /* MC_EMEM_ARB_MISC0 */
-					0x70000f03 /* MC_EMEM_ARB_MISC1 */
-					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-				>;
-			};
-
-			timing-20400000 {
-				clock-frequency = <20400000>;
-
-				nvidia,emem-configuration = <
-					0x40020001 /* MC_EMEM_ARB_CFG */
-					0x80000012 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
-					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
-					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
-					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
-					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
-					0x000a0402 /* MC_EMEM_ARB_DA_COVERS */
-					0x76230303 /* MC_EMEM_ARB_MISC0 */
-					0x70000f03 /* MC_EMEM_ARB_MISC1 */
-					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-				>;
-			};
-
-			timing-40800000 {
-				clock-frequency = <40800000>;
-
-				nvidia,emem-configuration = <
-					0xa0000001 /* MC_EMEM_ARB_CFG */
-					0x80000017 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
-					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
-					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
-					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
-					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
-					0x000a0402 /* MC_EMEM_ARB_DA_COVERS */
-					0x74a30303 /* MC_EMEM_ARB_MISC0 */
-					0x70000f03 /* MC_EMEM_ARB_MISC1 */
-					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-				>;
-			};
-
-			timing-68000000 {
-				clock-frequency = <68000000>;
-
-				nvidia,emem-configuration = <
-					0x00000001 /* MC_EMEM_ARB_CFG */
-					0x8000001e /* MC_EMEM_ARB_OUTSTANDING_REQ */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
-					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
-					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
-					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
-					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
-					0x000a0402 /* MC_EMEM_ARB_DA_COVERS */
-					0x74230403 /* MC_EMEM_ARB_MISC0 */
-					0x70000f03 /* MC_EMEM_ARB_MISC1 */
-					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-				>;
-			};
-
-			timing-102000000 {
-				clock-frequency = <102000000>;
-
-				nvidia,emem-configuration = <
-					0x08000001 /* MC_EMEM_ARB_CFG */
-					0x80000026 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
-					0x00000003 /* MC_EMEM_ARB_TIMING_RC */
-					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
-					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
-					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
-					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
-					0x000a0403 /* MC_EMEM_ARB_DA_COVERS */
-					0x73c30504 /* MC_EMEM_ARB_MISC0 */
-					0x70000f03 /* MC_EMEM_ARB_MISC1 */
-					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-				>;
-			};
-
-			timing-204000000 {
-				clock-frequency = <204000000>;
-
-				nvidia,emem-configuration = <
-					0x01000003 /* MC_EMEM_ARB_CFG */
-					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
-					0x00000005 /* MC_EMEM_ARB_TIMING_RC */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RAS */
-					0x00000004 /* MC_EMEM_ARB_TIMING_FAW */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
-					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-					0x00000004 /* MC_EMEM_ARB_TIMING_R2W */
-					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-					0x06040203 /* MC_EMEM_ARB_DA_TURNS */
-					0x000a0405 /* MC_EMEM_ARB_DA_COVERS */
-					0x73840a06 /* MC_EMEM_ARB_MISC0 */
-					0x70000f03 /* MC_EMEM_ARB_MISC1 */
-					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-				>;
-			};
-
-			timing-300000000 {
-				clock-frequency = <300000000>;
-
-				nvidia,emem-configuration = <
-					0x08000004 /* MC_EMEM_ARB_CFG */
-					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RP */
-					0x00000007 /* MC_EMEM_ARB_TIMING_RC */
-					0x00000004 /* MC_EMEM_ARB_TIMING_RAS */
-					0x00000005 /* MC_EMEM_ARB_TIMING_FAW */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-					0x00000007 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
-					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-					0x00000004 /* MC_EMEM_ARB_TIMING_R2W */
-					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-					0x06040202 /* MC_EMEM_ARB_DA_TURNS */
-					0x000b0607 /* MC_EMEM_ARB_DA_COVERS */
-					0x77450e08 /* MC_EMEM_ARB_MISC0 */
-					0x70000f03 /* MC_EMEM_ARB_MISC1 */
-					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-				>;
-			};
-
-			timing-396000000 {
-				clock-frequency = <396000000>;
-
-				nvidia,emem-configuration = <
-					0x0f000005 /* MC_EMEM_ARB_CFG */
-					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RP */
-					0x00000009 /* MC_EMEM_ARB_TIMING_RC */
-					0x00000005 /* MC_EMEM_ARB_TIMING_RAS */
-					0x00000007 /* MC_EMEM_ARB_TIMING_FAW */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
-					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-					0x00000004 /* MC_EMEM_ARB_TIMING_R2W */
-					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-					0x06040202 /* MC_EMEM_ARB_DA_TURNS */
-					0x000d0709 /* MC_EMEM_ARB_DA_COVERS */
-					0x7586120a /* MC_EMEM_ARB_MISC0 */
-					0x70000f03 /* MC_EMEM_ARB_MISC1 */
-					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-				>;
-			};
-
-			timing-528000000 {
-				clock-frequency = <528000000>;
-
-				nvidia,emem-configuration = <
-					0x0f000007 /* MC_EMEM_ARB_CFG */
-					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RCD */
-					0x00000003 /* MC_EMEM_ARB_TIMING_RP */
-					0x0000000d /* MC_EMEM_ARB_TIMING_RC */
-					0x00000008 /* MC_EMEM_ARB_TIMING_RAS */
-					0x0000000a /* MC_EMEM_ARB_TIMING_FAW */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-					0x00000009 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
-					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-					0x00000005 /* MC_EMEM_ARB_TIMING_R2W */
-					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-					0x06050202 /* MC_EMEM_ARB_DA_TURNS */
-					0x0010090d /* MC_EMEM_ARB_DA_COVERS */
-					0x7428180e /* MC_EMEM_ARB_MISC0 */
-					0x70000f03 /* MC_EMEM_ARB_MISC1 */
-					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-				>;
-			};
-
-			timing-600000000 {
-				clock-frequency = <600000000>;
-
-				nvidia,emem-configuration = <
-					0x00000009 /* MC_EMEM_ARB_CFG */
-					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-					0x00000003 /* MC_EMEM_ARB_TIMING_RCD */
-					0x00000004 /* MC_EMEM_ARB_TIMING_RP */
-					0x0000000e /* MC_EMEM_ARB_TIMING_RC */
-					0x00000009 /* MC_EMEM_ARB_TIMING_RAS */
-					0x0000000b /* MC_EMEM_ARB_TIMING_FAW */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RRD */
-					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-					0x0000000b /* MC_EMEM_ARB_TIMING_WAP2PRE */
-					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
-					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-					0x00000005 /* MC_EMEM_ARB_TIMING_R2W */
-					0x00000007 /* MC_EMEM_ARB_TIMING_W2R */
-					0x07050202 /* MC_EMEM_ARB_DA_TURNS */
-					0x00130b0e /* MC_EMEM_ARB_DA_COVERS */
-					0x73a91b0f /* MC_EMEM_ARB_MISC0 */
-					0x70000f03 /* MC_EMEM_ARB_MISC1 */
-					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-				>;
-			};
-
-			timing-792000000 {
-				clock-frequency = <792000000>;
-
-				nvidia,emem-configuration = <
-					0x0e00000b /* MC_EMEM_ARB_CFG */
-					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-					0x00000004 /* MC_EMEM_ARB_TIMING_RCD */
-					0x00000005 /* MC_EMEM_ARB_TIMING_RP */
-					0x00000013 /* MC_EMEM_ARB_TIMING_RC */
-					0x0000000c /* MC_EMEM_ARB_TIMING_RAS */
-					0x0000000f /* MC_EMEM_ARB_TIMING_FAW */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RRD */
-					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-					0x0000000c /* MC_EMEM_ARB_TIMING_WAP2PRE */
-					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
-					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-					0x00000006 /* MC_EMEM_ARB_TIMING_R2W */
-					0x00000008 /* MC_EMEM_ARB_TIMING_W2R */
-					0x08060202 /* MC_EMEM_ARB_DA_TURNS */
-					0x00160d13 /* MC_EMEM_ARB_DA_COVERS */
-					0x734c2414 /* MC_EMEM_ARB_MISC0 */
-					0x70000f02 /* MC_EMEM_ARB_MISC1 */
-					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-				>;
-			};
-		};
-	};
 };
 
 &emc_icc_dvfs_opp_table {
-	/delete-node/ opp@924000000,1100;
-	/delete-node/ opp@1200000000,1100;
+	/delete-node/ opp-924000000-1100;
+	/delete-node/ opp-1200000000-1100;
 };
 
 &emc_bw_dfs_opp_table {
-	/delete-node/ opp@924000000;
-	/delete-node/ opp@1200000000;
+	/delete-node/ opp-924000000;
+	/delete-node/ opp-1200000000;
 };
diff --git a/dts/src/arm/tegra124-nyan-big-fhd.dts b/dts/src/arm/tegra124-nyan-big-fhd.dts
new file mode 100644
index 0000000000..d35fb79d2f
--- /dev/null
+++ b/dts/src/arm/tegra124-nyan-big-fhd.dts
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra124-nyan-big.dts"
+
+/ {
+	/* Version of Nyan Big with 1080p panel */
+	panel {
+		compatible = "auo,b133htn01";
+	};
+};
diff --git a/dts/src/arm/tegra124-nyan-blaze-emc.dtsi b/dts/src/arm/tegra124-nyan-blaze-emc.dtsi
index 35c98734d3..2ce1b12be4 100644
--- a/dts/src/arm/tegra124-nyan-blaze-emc.dtsi
+++ b/dts/src/arm/tegra124-nyan-blaze-emc.dtsi
@@ -10,55 +10,65 @@
 				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
 				clock-names = "emc-parent";
 			};
+
 			timing-20400000 {
 				clock-frequency = <20400000>;
 				nvidia,parent-clock-frequency = <408000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
 				clock-names = "emc-parent";
 			};
+
 			timing-40800000 {
 				clock-frequency = <40800000>;
 				nvidia,parent-clock-frequency = <408000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
 				clock-names = "emc-parent";
 			};
+
 			timing-68000000 {
 				clock-frequency = <68000000>;
 				nvidia,parent-clock-frequency = <408000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
 				clock-names = "emc-parent";
 			};
+
 			timing-102000000 {
 				clock-frequency = <102000000>;
 				nvidia,parent-clock-frequency = <408000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
 				clock-names = "emc-parent";
 			};
+
 			timing-204000000 {
 				clock-frequency = <204000000>;
 				nvidia,parent-clock-frequency = <408000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
 				clock-names = "emc-parent";
 			};
+
 			timing-300000000 {
 				clock-frequency = <300000000>;
 				nvidia,parent-clock-frequency = <600000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_C>;
 				clock-names = "emc-parent";
 			};
+
 			timing-396000000 {
 				clock-frequency = <396000000>;
 				nvidia,parent-clock-frequency = <792000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_M>;
 				clock-names = "emc-parent";
 			};
+
 			/* TODO: Add 528MHz frequency */
+
 			timing-600000000 {
 				clock-frequency = <600000000>;
 				nvidia,parent-clock-frequency = <600000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_C_UD>;
 				clock-names = "emc-parent";
 			};
+
 			timing-792000000 {
 				clock-frequency = <792000000>;
 				nvidia,parent-clock-frequency = <792000000>;
@@ -68,6 +78,298 @@
 		};
 	};
 
+	memory-controller@70019000 {
+		emc-timings-1 {
+			nvidia,ram-code = <1>;
+
+			timing-12750000 {
+				clock-frequency = <12750000>;
+
+				nvidia,emem-configuration = <
+					0x40040001
+					0x8000000a
+					0x00000001
+					0x00000001
+					0x00000002
+					0x00000000
+					0x00000002
+					0x00000001
+					0x00000002
+					0x00000008
+					0x00000003
+					0x00000002
+					0x00000003
+					0x00000006
+					0x06030203
+					0x000a0402
+					0x77e30303
+					0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-20400000 {
+				clock-frequency = <20400000>;
+
+				nvidia,emem-configuration = <
+					0x40020001
+					0x80000012
+					0x00000001
+					0x00000001
+					0x00000002
+					0x00000000
+					0x00000002
+					0x00000001
+					0x00000002
+					0x00000008
+					0x00000003
+					0x00000002
+					0x00000003
+					0x00000006
+					0x06030203
+					0x000a0402
+					0x76230303
+					0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-40800000 {
+				clock-frequency = <40800000>;
+
+				nvidia,emem-configuration = <
+					0xa0000001
+					0x80000017
+					0x00000001
+					0x00000001
+					0x00000002
+					0x00000000
+					0x00000002
+					0x00000001
+					0x00000002
+					0x00000008
+					0x00000003
+					0x00000002
+					0x00000003
+					0x00000006
+					0x06030203
+					0x000a0402
+					0x74a30303
+					0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-68000000 {
+				clock-frequency = <68000000>;
+
+				nvidia,emem-configuration = <
+					0x00000001
+					0x8000001e
+					0x00000001
+					0x00000001
+					0x00000002
+					0x00000000
+					0x00000002
+					0x00000001
+					0x00000002
+					0x00000008
+					0x00000003
+					0x00000002
+					0x00000003
+					0x00000006
+					0x06030203
+					0x000a0402
+					0x74230403
+					0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = <
+					0x08000001
+					0x80000026
+					0x00000001
+					0x00000001
+					0x00000003
+					0x00000000
+					0x00000002
+					0x00000001
+					0x00000002
+					0x00000008
+					0x00000003
+					0x00000002
+					0x00000003
+					0x00000006
+					0x06030203
+					0x000a0403
+					0x73c30504
+					0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = <
+					0x01000003
+					0x80000040
+					0x00000001
+					0x00000001
+					0x00000005
+					0x00000002
+					0x00000004
+					0x00000001
+					0x00000002
+					0x00000008
+					0x00000003
+					0x00000002
+					0x00000004
+					0x00000006
+					0x06040203
+					0x000a0405
+					0x73840a06
+					0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-300000000 {
+				clock-frequency = <300000000>;
+
+				nvidia,emem-configuration = <
+					0x08000004
+					0x80000040
+					0x00000001
+					0x00000002
+					0x00000007
+					0x00000004
+					0x00000005
+					0x00000001
+					0x00000002
+					0x00000007
+					0x00000002
+					0x00000002
+					0x00000004
+					0x00000006
+					0x06040202
+					0x000b0607
+					0x77450e08
+					0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-396000000 {
+				clock-frequency = <396000000>;
+
+				nvidia,emem-configuration = <
+					0x0f000005
+					0x80000040
+					0x00000001
+					0x00000002
+					0x00000009
+					0x00000005
+					0x00000007
+					0x00000001
+					0x00000002
+					0x00000008
+					0x00000002
+					0x00000002
+					0x00000004
+					0x00000006
+					0x06040202
+					0x000d0709
+					0x7586120a
+					0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-528000000 {
+				clock-frequency = <528000000>;
+
+				nvidia,emem-configuration = <
+					0x0f000007
+					0x80000040
+					0x00000002
+					0x00000003
+					0x0000000d
+					0x00000008
+					0x0000000a
+					0x00000001
+					0x00000002
+					0x00000009
+					0x00000002
+					0x00000002
+					0x00000005
+					0x00000006
+					0x06050202
+					0x0010090d
+					0x7428180e
+					0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-600000000 {
+				clock-frequency = <600000000>;
+
+				nvidia,emem-configuration = <
+					0x00000009
+					0x80000040
+					0x00000003
+					0x00000004
+					0x0000000e
+					0x00000009
+					0x0000000b
+					0x00000001
+					0x00000003
+					0x0000000b
+					0x00000002
+					0x00000002
+					0x00000005
+					0x00000007
+					0x07050202
+					0x00130b0e
+					0x73a91b0f
+					0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-792000000 {
+				clock-frequency = <792000000>;
+
+				nvidia,emem-configuration = <
+					0x0e00000b
+					0x80000040
+					0x00000004
+					0x00000005
+					0x00000013
+					0x0000000c
+					0x0000000f
+					0x00000002
+					0x00000003
+					0x0000000c
+					0x00000002
+					0x00000002
+					0x00000006
+					0x00000008
+					0x08060202
+					0x00160d13
+					0x734c2414
+					0x70000f02
+					0x001f0000
+				>;
+			};
+		};
+	};
+
 	external-memory-controller@7001b000 {
 		emc-timings-1 {
 			nvidia,ram-code = <1>;
@@ -1751,310 +2053,16 @@
 					0x0000000f
 				>;
 			};
-
-		};
-	};
-
-	memory-controller@70019000 {
-		emc-timings-1 {
-			nvidia,ram-code = <1>;
-
-
-			timing-12750000 {
-				clock-frequency = <12750000>;
-
-				nvidia,emem-configuration = <
-					0x40040001
-					0x8000000a
-					0x00000001
-					0x00000001
-					0x00000002
-					0x00000000
-					0x00000002
-					0x00000001
-					0x00000002
-					0x00000008
-					0x00000003
-					0x00000002
-					0x00000003
-					0x00000006
-					0x06030203
-					0x000a0402
-					0x77e30303
-					0x70000f03
-					0x001f0000
-				>;
-			};
-
-			timing-20400000 {
-				clock-frequency = <20400000>;
-
-				nvidia,emem-configuration = <
-					0x40020001
-					0x80000012
-					0x00000001
-					0x00000001
-					0x00000002
-					0x00000000
-					0x00000002
-					0x00000001
-					0x00000002
-					0x00000008
-					0x00000003
-					0x00000002
-					0x00000003
-					0x00000006
-					0x06030203
-					0x000a0402
-					0x76230303
-					0x70000f03
-					0x001f0000
-				>;
-			};
-
-			timing-40800000 {
-				clock-frequency = <40800000>;
-
-				nvidia,emem-configuration = <
-					0xa0000001
-					0x80000017
-					0x00000001
-					0x00000001
-					0x00000002
-					0x00000000
-					0x00000002
-					0x00000001
-					0x00000002
-					0x00000008
-					0x00000003
-					0x00000002
-					0x00000003
-					0x00000006
-					0x06030203
-					0x000a0402
-					0x74a30303
-					0x70000f03
-					0x001f0000
-				>;
-			};
-
-			timing-68000000 {
-				clock-frequency = <68000000>;
-
-				nvidia,emem-configuration = <
-					0x00000001
-					0x8000001e
-					0x00000001
-					0x00000001
-					0x00000002
-					0x00000000
-					0x00000002
-					0x00000001
-					0x00000002
-					0x00000008
-					0x00000003
-					0x00000002
-					0x00000003
-					0x00000006
-					0x06030203
-					0x000a0402
-					0x74230403
-					0x70000f03
-					0x001f0000
-				>;
-			};
-
-			timing-102000000 {
-				clock-frequency = <102000000>;
-
-				nvidia,emem-configuration = <
-					0x08000001
-					0x80000026
-					0x00000001
-					0x00000001
-					0x00000003
-					0x00000000
-					0x00000002
-					0x00000001
-					0x00000002
-					0x00000008
-					0x00000003
-					0x00000002
-					0x00000003
-					0x00000006
-					0x06030203
-					0x000a0403
-					0x73c30504
-					0x70000f03
-					0x001f0000
-				>;
-			};
-
-			timing-204000000 {
-				clock-frequency = <204000000>;
-
-				nvidia,emem-configuration = <
-					0x01000003
-					0x80000040
-					0x00000001
-					0x00000001
-					0x00000005
-					0x00000002
-					0x00000004
-					0x00000001
-					0x00000002
-					0x00000008
-					0x00000003
-					0x00000002
-					0x00000004
-					0x00000006
-					0x06040203
-					0x000a0405
-					0x73840a06
-					0x70000f03
-					0x001f0000
-				>;
-			};
-
-			timing-300000000 {
-				clock-frequency = <300000000>;
-
-				nvidia,emem-configuration = <
-					0x08000004
-					0x80000040
-					0x00000001
-					0x00000002
-					0x00000007
-					0x00000004
-					0x00000005
-					0x00000001
-					0x00000002
-					0x00000007
-					0x00000002
-					0x00000002
-					0x00000004
-					0x00000006
-					0x06040202
-					0x000b0607
-					0x77450e08
-					0x70000f03
-					0x001f0000
-				>;
-			};
-
-			timing-396000000 {
-				clock-frequency = <396000000>;
-
-				nvidia,emem-configuration = <
-					0x0f000005
-					0x80000040
-					0x00000001
-					0x00000002
-					0x00000009
-					0x00000005
-					0x00000007
-					0x00000001
-					0x00000002
-					0x00000008
-					0x00000002
-					0x00000002
-					0x00000004
-					0x00000006
-					0x06040202
-					0x000d0709
-					0x7586120a
-					0x70000f03
-					0x001f0000
-				>;
-			};
-
-			timing-528000000 {
-				clock-frequency = <528000000>;
-
-				nvidia,emem-configuration = <
-					0x0f000007
-					0x80000040
-					0x00000002
-					0x00000003
-					0x0000000d
-					0x00000008
-					0x0000000a
-					0x00000001
-					0x00000002
-					0x00000009
-					0x00000002
-					0x00000002
-					0x00000005
-					0x00000006
-					0x06050202
-					0x0010090d
-					0x7428180e
-					0x70000f03
-					0x001f0000
-				>;
-			};
-
-			timing-600000000 {
-				clock-frequency = <600000000>;
-
-				nvidia,emem-configuration = <
-					0x00000009
-					0x80000040
-					0x00000003
-					0x00000004
-					0x0000000e
-					0x00000009
-					0x0000000b
-					0x00000001
-					0x00000003
-					0x0000000b
-					0x00000002
-					0x00000002
-					0x00000005
-					0x00000007
-					0x07050202
-					0x00130b0e
-					0x73a91b0f
-					0x70000f03
-					0x001f0000
-				>;
-			};
-
-			timing-792000000 {
-				clock-frequency = <792000000>;
-
-				nvidia,emem-configuration = <
-					0x0e00000b
-					0x80000040
-					0x00000004
-					0x00000005
-					0x00000013
-					0x0000000c
-					0x0000000f
-					0x00000002
-					0x00000003
-					0x0000000c
-					0x00000002
-					0x00000002
-					0x00000006
-					0x00000008
-					0x08060202
-					0x00160d13
-					0x734c2414
-					0x70000f02
-					0x001f0000
-				>;
-			};
 		};
 	};
 };
 
 &emc_icc_dvfs_opp_table {
-	/delete-node/ opp@924000000,1100;
-	/delete-node/ opp@1200000000,1100;
+	/delete-node/ opp-924000000-1100;
+	/delete-node/ opp-1200000000-1100;
 };
 
 &emc_bw_dfs_opp_table {
-	/delete-node/ opp@924000000;
-	/delete-node/ opp@1200000000;
+	/delete-node/ opp-924000000;
+	/delete-node/ opp-1200000000;
 };
diff --git a/dts/src/arm/tegra124-nyan.dtsi b/dts/src/arm/tegra124-nyan.dtsi
index 63a8127030..a93cfb492b 100644
--- a/dts/src/arm/tegra124-nyan.dtsi
+++ b/dts/src/arm/tegra124-nyan.dtsi
@@ -1,5 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/thermal/thermal.h>
 #include "tegra124.dtsi"
 
 / {
@@ -61,7 +62,7 @@
 		};
 	};
 
-	gpu@0,57000000 {
+	gpu@57000000 {
 		status = "okay";
 
 		vdd-supply = <&vdd_gpu>;
@@ -87,7 +88,7 @@
 			interrupts = <TEGRA_GPIO(H, 4) IRQ_TYPE_EDGE_FALLING>;
 		};
 
-		temperature-sensor@4c {
+		tmp451: temperature-sensor@4c {
 			compatible = "ti,tmp451";
 			reg = <0x4c>;
 			interrupt-parent = <&gpio>;
@@ -390,6 +391,10 @@
 		nvidia,sys-clock-req-active-high;
 	};
 
+	cec@70015000 {
+		status = "okay";
+	};
+
 	hda@70030000 {
 		status = "okay";
 	};
@@ -466,6 +471,7 @@
 				vbus-supply = <&vdd_usb1_vbus>;
 				status = "okay";
 				mode = "otg";
+				usb-role-switch;
 			};
 
 			usb2-1 {
@@ -527,7 +533,7 @@
 
 	/* CPU DFLL clock */
 	clock@70110000 {
-		status = "disabled";
+		status = "okay";
 		vdd-cpu-supply = <&vdd_cpu>;
 		nvidia,i2c-fs-rate = <400000>;
 	};
@@ -582,7 +588,7 @@
 			 256>;
 	};
 
-	clk32k_in: clock@0 {
+	clk32k_in: clock-32k {
 		compatible = "fixed-clock";
 		clock-frequency = <32768>;
 		#clock-cells = <0>;
@@ -615,7 +621,7 @@
 		};
 	};
 
-	vdd_mux: regulator@0 {
+	vdd_mux: regulator-mux {
 		compatible = "regulator-fixed";
 		regulator-name = "+VDD_MUX";
 		regulator-min-microvolt = <12000000>;
@@ -624,7 +630,7 @@
 		regulator-boot-on;
 	};
 
-	vdd_5v0_sys: regulator@1 {
+	vdd_5v0_sys: regulator-5v0sys {
 		compatible = "regulator-fixed";
 		regulator-name = "+5V_SYS";
 		regulator-min-microvolt = <5000000>;
@@ -634,7 +640,7 @@
 		vin-supply = <&vdd_mux>;
 	};
 
-	vdd_3v3_sys: regulator@2 {
+	vdd_3v3_sys: regulator-3v3sys {
 		compatible = "regulator-fixed";
 		regulator-name = "+3.3V_SYS";
 		regulator-min-microvolt = <3300000>;
@@ -644,7 +650,7 @@
 		vin-supply = <&vdd_mux>;
 	};
 
-	vdd_3v3_run: regulator@3 {
+	vdd_3v3_run: regulator-3v3run {
 		compatible = "regulator-fixed";
 		regulator-name = "+3.3V_RUN";
 		regulator-min-microvolt = <3300000>;
@@ -656,7 +662,7 @@
 		vin-supply = <&vdd_3v3_sys>;
 	};
 
-	vdd_3v3_hdmi: regulator@4 {
+	vdd_3v3_hdmi: regulator-3v3hdmi {
 		compatible = "regulator-fixed";
 		regulator-name = "+3.3V_AVDD_HDMI_AP_GATED";
 		regulator-min-microvolt = <3300000>;
@@ -664,7 +670,7 @@
 		vin-supply = <&vdd_3v3_run>;
 	};
 
-	vdd_led: regulator@5 {
+	vdd_led: regulator-led {
 		compatible = "regulator-fixed";
 		regulator-name = "+VDD_LED";
 		gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
@@ -672,7 +678,7 @@
 		vin-supply = <&vdd_mux>;
 	};
 
-	vdd_5v0_ts: regulator@6 {
+	vdd_5v0_ts: regulator-ts {
 		compatible = "regulator-fixed";
 		regulator-name = "+5V_VDD_TS_SW";
 		regulator-min-microvolt = <5000000>;
@@ -683,7 +689,7 @@
 		vin-supply = <&vdd_5v0_sys>;
 	};
 
-	vdd_usb1_vbus: regulator@7 {
+	vdd_usb1_vbus: regulator-usb1 {
 		compatible = "regulator-fixed";
 		regulator-name = "+5V_USB_HS";
 		regulator-min-microvolt = <5000000>;
@@ -694,7 +700,7 @@
 		vin-supply = <&vdd_5v0_sys>;
 	};
 
-	vdd_usb3_vbus: regulator@8 {
+	vdd_usb3_vbus: regulator-usb3 {
 		compatible = "regulator-fixed";
 		regulator-name = "+5V_USB_SS";
 		regulator-min-microvolt = <5000000>;
@@ -705,7 +711,7 @@
 		vin-supply = <&vdd_5v0_sys>;
 	};
 
-	vdd_3v3_panel: regulator@9 {
+	vdd_3v3_panel: regulator-panel {
 		compatible = "regulator-fixed";
 		regulator-name = "+3.3V_PANEL";
 		regulator-min-microvolt = <3300000>;
@@ -715,7 +721,7 @@
 		vin-supply = <&vdd_3v3_run>;
 	};
 
-	vdd_3v3_lp0: regulator@10 {
+	vdd_3v3_lp0: regulator-lp0 {
 		compatible = "regulator-fixed";
 		regulator-name = "+3.3V_LP0";
 		regulator-min-microvolt = <3300000>;
@@ -730,7 +736,7 @@
 		vin-supply = <&vdd_3v3_sys>;
 	};
 
-	vdd_hdmi_pll: regulator@11 {
+	vdd_hdmi_pll: regulator-hdmipll {
 		compatible = "regulator-fixed";
 		regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL";
 		regulator-min-microvolt = <1050000>;
@@ -739,7 +745,7 @@
 		vin-supply = <&vdd_1v05_run>;
 	};
 
-	vdd_5v0_hdmi: regulator@12 {
+	vdd_5v0_hdmi: regulator-hdmicon {
 		compatible = "regulator-fixed";
 		regulator-name = "+5V_HDMI_CON";
 		regulator-min-microvolt = <5000000>;
@@ -784,6 +790,52 @@
 		gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
 		priority = <200>;
 	};
+
+	cpus {
+		cpu0: cpu@0 {
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@2 {
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@3 {
+			#cooling-cells = <2>;
+		};
+	};
+
+	thermal-zones {
+		cpu-skin-thermal {
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <5000>; /* milliseconds */
+
+			thermal-sensors = <&tmp451 0>;
+
+			trips {
+				cpu_passive_trip: cpu-alert0 {
+					/* throttle at 70C until temperature drops to 69.8C */
+					temperature = <70000>;
+					hysteresis = <200>;
+					type = "passive";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_passive_trip>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
 };
 
 #include "cros-ec-keyboard.dtsi"
diff --git a/dts/src/arm/tegra124-peripherals-opp.dtsi b/dts/src/arm/tegra124-peripherals-opp.dtsi
index 781ac86010..b262c1289d 100644
--- a/dts/src/arm/tegra124-peripherals-opp.dtsi
+++ b/dts/src/arm/tegra124-peripherals-opp.dtsi
@@ -1,421 +1,421 @@
 // SPDX-License-Identifier: GPL-2.0
 
 / {
-	emc_icc_dvfs_opp_table: emc-dvfs-opp-table {
+	emc_icc_dvfs_opp_table: opp-table-emc {
 		compatible = "operating-points-v2";
 
-		opp@12750000,800 {
+		opp-12750000-800 {
 			opp-microvolt = <800000 800000 1150000>;
 			opp-hz = /bits/ 64 <12750000>;
 			opp-supported-hw = <0x0003>;
 		};
 
-		opp@12750000,950 {
+		opp-12750000-950 {
 			opp-microvolt = <950000 950000 1150000>;
 			opp-hz = /bits/ 64 <12750000>;
 			opp-supported-hw = <0x0008>;
 		};
 
-		opp@12750000,1050 {
+		opp-12750000-1050 {
 			opp-microvolt = <1050000 1050000 1150000>;
 			opp-hz = /bits/ 64 <12750000>;
 			opp-supported-hw = <0x0010>;
 		};
 
-		opp@12750000,1110 {
+		opp-12750000-1110 {
 			opp-microvolt = <1110000 1110000 1150000>;
 			opp-hz = /bits/ 64 <12750000>;
 			opp-supported-hw = <0x0004>;
 		};
 
-		opp@20400000,800 {
+		opp-20400000-800 {
 			opp-microvolt = <800000 800000 1150000>;
 			opp-hz = /bits/ 64 <20400000>;
 			opp-supported-hw = <0x0003>;
 		};
 
-		opp@20400000,950 {
+		opp-20400000-950 {
 			opp-microvolt = <950000 950000 1150000>;
 			opp-hz = /bits/ 64 <20400000>;
 			opp-supported-hw = <0x0008>;
 		};
 
-		opp@20400000,1050 {
+		opp-20400000-1050 {
 			opp-microvolt = <1050000 1050000 1150000>;
 			opp-hz = /bits/ 64 <20400000>;
 			opp-supported-hw = <0x0010>;
 		};
 
-		opp@20400000,1110 {
+		opp-20400000-1110 {
 			opp-microvolt = <1110000 1110000 1150000>;
 			opp-hz = /bits/ 64 <20400000>;
 			opp-supported-hw = <0x0004>;
 		};
 
-		opp@40800000,800 {
+		opp-40800000-800 {
 			opp-microvolt = <800000 800000 1150000>;
 			opp-hz = /bits/ 64 <40800000>;
 			opp-supported-hw = <0x0003>;
 		};
 
-		opp@40800000,950 {
+		opp-40800000-950 {
 			opp-microvolt = <950000 950000 1150000>;
 			opp-hz = /bits/ 64 <40800000>;
 			opp-supported-hw = <0x0008>;
 		};
 
-		opp@40800000,1050 {
+		opp-40800000-1050 {
 			opp-microvolt = <1050000 1050000 1150000>;
 			opp-hz = /bits/ 64 <40800000>;
 			opp-supported-hw = <0x0010>;
 		};
 
-		opp@40800000,1110 {
+		opp-40800000-1110 {
 			opp-microvolt = <1110000 1110000 1150000>;
 			opp-hz = /bits/ 64 <40800000>;
 			opp-supported-hw = <0x0004>;
 		};
 
-		opp@68000000,800 {
+		opp-68000000-800 {
 			opp-microvolt = <800000 800000 1150000>;
 			opp-hz = /bits/ 64 <68000000>;
 			opp-supported-hw = <0x0003>;
 		};
 
-		opp@68000000,950 {
+		opp-68000000-950 {
 			opp-microvolt = <950000 950000 1150000>;
 			opp-hz = /bits/ 64 <68000000>;
 			opp-supported-hw = <0x0008>;
 		};
 
-		opp@68000000,1050 {
+		opp-68000000-1050 {
 			opp-microvolt = <1050000 1050000 1150000>;
 			opp-hz = /bits/ 64 <68000000>;
 			opp-supported-hw = <0x0010>;
 		};
 
-		opp@68000000,1110 {
+		opp-68000000-1110 {
 			opp-microvolt = <1110000 1110000 1150000>;
 			opp-hz = /bits/ 64 <68000000>;
 			opp-supported-hw = <0x0004>;
 		};
 
-		opp@102000000,800 {
+		opp-102000000-800 {
 			opp-microvolt = <800000 800000 1150000>;
 			opp-hz = /bits/ 64 <102000000>;
 			opp-supported-hw = <0x0003>;
 		};
 
-		opp@102000000,950 {
+		opp-102000000-950 {
 			opp-microvolt = <950000 950000 1150000>;
 			opp-hz = /bits/ 64 <102000000>;
 			opp-supported-hw = <0x0008>;
 		};
 
-		opp@102000000,1050 {
+		opp-102000000-1050 {
 			opp-microvolt = <1050000 1050000 1150000>;
 			opp-hz = /bits/ 64 <102000000>;
 			opp-supported-hw = <0x0010>;
 		};
 
-		opp@102000000,1110 {
+		opp-102000000-1110 {
 			opp-microvolt = <1110000 1110000 1150000>;
 			opp-hz = /bits/ 64 <102000000>;
 			opp-supported-hw = <0x0004>;
 		};
 
-		opp@204000000,800 {
+		opp-204000000-800 {
 			opp-microvolt = <800000 800000 1150000>;
 			opp-hz = /bits/ 64 <204000000>;
 			opp-supported-hw = <0x0003>;
 			opp-suspend;
 		};
 
-		opp@204000000,950 {
+		opp-204000000-950 {
 			opp-microvolt = <950000 950000 1150000>;
 			opp-hz = /bits/ 64 <204000000>;
 			opp-supported-hw = <0x0008>;
 			opp-suspend;
 		};
 
-		opp@204000000,1050 {
+		opp-204000000-1050 {
 			opp-microvolt = <1050000 1050000 1150000>;
 			opp-hz = /bits/ 64 <204000000>;
 			opp-supported-hw = <0x0010>;
 			opp-suspend;
 		};
 
-		opp@204000000,1110 {
+		opp-204000000-1110 {
 			opp-microvolt = <1110000 1110000 1150000>;
 			opp-hz = /bits/ 64 <204000000>;
 			opp-supported-hw = <0x0004>;
 			opp-suspend;
 		};
 
-		opp@264000000,800 {
+		opp-264000000-800 {
 			opp-microvolt = <800000 800000 1150000>;
 			opp-hz = /bits/ 64 <264000000>;
 			opp-supported-hw = <0x0003>;
 		};
 
-		opp@264000000,950 {
+		opp-264000000-950 {
 			opp-microvolt = <950000 950000 1150000>;
 			opp-hz = /bits/ 64 <264000000>;
 			opp-supported-hw = <0x0008>;
 		};
 
-		opp@264000000,1050 {
+		opp-264000000-1050 {
 			opp-microvolt = <1050000 1050000 1150000>;
 			opp-hz = /bits/ 64 <264000000>;
 			opp-supported-hw = <0x0010>;
 		};
 
-		opp@264000000,1110 {
+		opp-264000000-1110 {
 			opp-microvolt = <1110000 1110000 1150000>;
 			opp-hz = /bits/ 64 <264000000>;
 			opp-supported-hw = <0x0004>;
 		};
 
-		opp@300000000,850 {
+		opp-300000000-850 {
 			opp-microvolt = <850000 850000 1150000>;
 			opp-hz = /bits/ 64 <300000000>;
 			opp-supported-hw = <0x0003>;
 		};
 
-		opp@300000000,950 {
+		opp-300000000-950 {
 			opp-microvolt = <950000 950000 1150000>;
 			opp-hz = /bits/ 64 <300000000>;
 			opp-supported-hw = <0x0008>;
 		};
 
-		opp@300000000,1050 {
+		opp-300000000-1050 {
 			opp-microvolt = <1050000 1050000 1150000>;
 			opp-hz = /bits/ 64 <300000000>;
 			opp-supported-hw = <0x0010>;
 		};
 
-		opp@300000000,1110 {
+		opp-300000000-1110 {
 			opp-microvolt = <1110000 1110000 1150000>;
 			opp-hz = /bits/ 64 <300000000>;
 			opp-supported-hw = <0x0004>;
 		};
 
-		opp@348000000,850 {
+		opp-348000000-850 {
 			opp-microvolt = <850000 850000 1150000>;
 			opp-hz = /bits/ 64 <348000000>;
 			opp-supported-hw = <0x0003>;
 		};
 
-		opp@348000000,950 {
+		opp-348000000-950 {
 			opp-microvolt = <950000 950000 1150000>;
 			opp-hz = /bits/ 64 <348000000>;
 			opp-supported-hw = <0x0008>;
 		};
 
-		opp@348000000,1050 {
+		opp-348000000-1050 {
 			opp-microvolt = <1050000 1050000 1150000>;
 			opp-hz = /bits/ 64 <348000000>;
 			opp-supported-hw = <0x0010>;
 		};
 
-		opp@348000000,1110 {
+		opp-348000000-1110 {
 			opp-microvolt = <1110000 1110000 1150000>;
 			opp-hz = /bits/ 64 <348000000>;
 			opp-supported-hw = <0x0004>;
 		};
 
-		opp@396000000,950 {
+		opp-396000000-950 {
 			opp-microvolt = <950000 950000 1150000>;
 			opp-hz = /bits/ 64 <396000000>;
 			opp-supported-hw = <0x0008>;
 		};
 
-		opp@396000000,1000 {
+		opp-396000000-1000 {
 			opp-microvolt = <1000000 1000000 1150000>;
 			opp-hz = /bits/ 64 <396000000>;
 			opp-supported-hw = <0x0003>;
 		};
 
-		opp@396000000,1050 {
+		opp-396000000-1050 {
 			opp-microvolt = <1050000 1050000 1150000>;
 			opp-hz = /bits/ 64 <396000000>;
 			opp-supported-hw = <0x0010>;
 		};
 
-		opp@396000000,1110 {
+		opp-396000000-1110 {
 			opp-microvolt = <1110000 1110000 1150000>;
 			opp-hz = /bits/ 64 <396000000>;
 			opp-supported-hw = <0x0004>;
 		};
 
-		opp@528000000,950 {
+		opp-528000000-950 {
 			opp-microvolt = <950000 950000 1150000>;
 			opp-hz = /bits/ 64 <528000000>;
 			opp-supported-hw = <0x0008>;
 		};
 
-		opp@528000000,1000 {
+		opp-528000000-1000 {
 			opp-microvolt = <1000000 1000000 1150000>;
 			opp-hz = /bits/ 64 <528000000>;
 			opp-supported-hw = <0x0003>;
 		};
 
-		opp@528000000,1050 {
+		opp-528000000-1050 {
 			opp-microvolt = <1050000 1050000 1150000>;
 			opp-hz = /bits/ 64 <528000000>;
 			opp-supported-hw = <0x0010>;
 		};
 
-		opp@528000000,1110 {
+		opp-528000000-1110 {
 			opp-microvolt = <1110000 1110000 1150000>;
 			opp-hz = /bits/ 64 <528000000>;
 			opp-supported-hw = <0x0004>;
 		};
 
-		opp@600000000,950 {
+		opp-600000000-950 {
 			opp-microvolt = <950000 950000 1150000>;
 			opp-hz = /bits/ 64 <600000000>;
 			opp-supported-hw = <0x0008>;
 		};
 
-		opp@600000000,1000 {
+		opp-600000000-1000 {
 			opp-microvolt = <1000000 1000000 1150000>;
 			opp-hz = /bits/ 64 <600000000>;
 			opp-supported-hw = <0x0003>;
 		};
 
-		opp@600000000,1050 {
+		opp-600000000-1050 {
 			opp-microvolt = <1050000 1050000 1150000>;
 			opp-hz = /bits/ 64 <600000000>;
 			opp-supported-hw = <0x0010>;
 		};
 
-		opp@600000000,1110 {
+		opp-600000000-1110 {
 			opp-microvolt = <1110000 1110000 1150000>;
 			opp-hz = /bits/ 64 <600000000>;
 			opp-supported-hw = <0x0004>;
 		};
 
-		opp@792000000,1000 {
+		opp-792000000-1000 {
 			opp-microvolt = <1000000 1000000 1150000>;
 			opp-hz = /bits/ 64 <792000000>;
 			opp-supported-hw = <0x000B>;
 		};
 
-		opp@792000000,1050 {
+		opp-792000000-1050 {
 			opp-microvolt = <1050000 1050000 1150000>;
 			opp-hz = /bits/ 64 <792000000>;
 			opp-supported-hw = <0x0010>;
 		};
 
-		opp@792000000,1110 {
+		opp-792000000-1110 {
 			opp-microvolt = <1110000 1110000 1150000>;
 			opp-hz = /bits/ 64 <792000000>;
 			opp-supported-hw = <0x0004>;
 		};
 
-		opp@924000000,1100 {
+		opp-924000000-1100 {
 			opp-microvolt = <1100000 1100000 1150000>;
 			opp-hz = /bits/ 64 <924000000>;
 			opp-supported-hw = <0x0013>;
 		};
 
-		opp@1200000000,1100 {
+		opp-1200000000-1100 {
 			opp-microvolt = <1100000 1100000 1150000>;
 			opp-hz = /bits/ 64 <1200000000>;
 			opp-supported-hw = <0x0003>;
 		};
 	};
 
-	emc_bw_dfs_opp_table: emc-bandwidth-opp-table {
+	emc_bw_dfs_opp_table: opp-table-actmon {
 		compatible = "operating-points-v2";
 
-		opp@12750000 {
+		opp-12750000 {
 			opp-hz = /bits/ 64 <12750000>;
 			opp-supported-hw = <0x001F>;
 			opp-peak-kBps = <204000>;
 		};
 
-		opp@20400000 {
+		opp-20400000 {
 			opp-hz = /bits/ 64 <20400000>;
 			opp-supported-hw = <0x001F>;
 			opp-peak-kBps = <326400>;
 		};
 
-		opp@40800000 {
+		opp-40800000 {
 			opp-hz = /bits/ 64 <40800000>;
 			opp-supported-hw = <0x001F>;
 			opp-peak-kBps = <652800>;
 		};
 
-		opp@68000000 {
+		opp-68000000 {
 			opp-hz = /bits/ 64 <68000000>;
 			opp-supported-hw = <0x001F>;
 			opp-peak-kBps = <1088000>;
 		};
 
-		opp@102000000 {
+		opp-102000000 {
 			opp-hz = /bits/ 64 <102000000>;
 			opp-supported-hw = <0x001F>;
 			opp-peak-kBps = <1632000>;
 		};
 
-		opp@204000000 {
+		opp-204000000 {
 			opp-hz = /bits/ 64 <204000000>;
 			opp-supported-hw = <0x001F>;
 			opp-peak-kBps = <3264000>;
 			opp-suspend;
 		};
 
-		opp@264000000 {
+		opp-264000000 {
 			opp-hz = /bits/ 64 <264000000>;
 			opp-supported-hw = <0x001F>;
 			opp-peak-kBps = <4224000>;
 		};
 
-		opp@300000000 {
+		opp-300000000 {
 			opp-hz = /bits/ 64 <300000000>;
 			opp-supported-hw = <0x001F>;
 			opp-peak-kBps = <4800000>;
 		};
 
-		opp@348000000 {
+		opp-348000000 {
 			opp-hz = /bits/ 64 <348000000>;
 			opp-supported-hw = <0x001F>;
 			opp-peak-kBps = <5568000>;
 		};
 
-		opp@396000000 {
+		opp-396000000 {
 			opp-hz = /bits/ 64 <396000000>;
 			opp-supported-hw = <0x001F>;
 			opp-peak-kBps = <6336000>;
 		};
 
-		opp@528000000 {
+		opp-528000000 {
 			opp-hz = /bits/ 64 <528000000>;
 			opp-supported-hw = <0x001F>;
 			opp-peak-kBps = <8448000>;
 		};
 
-		opp@600000000 {
+		opp-600000000 {
 			opp-hz = /bits/ 64 <600000000>;
 			opp-supported-hw = <0x001F>;
 			opp-peak-kBps = <9600000>;
 		};
 
-		opp@792000000 {
+		opp-792000000 {
 			opp-hz = /bits/ 64 <792000000>;
 			opp-supported-hw = <0x001F>;
 			opp-peak-kBps = <12672000>;
 		};
 
-		opp@924000000 {
+		opp-924000000 {
 			opp-hz = /bits/ 64 <924000000>;
 			opp-supported-hw = <0x0013>;
 			opp-peak-kBps = <14784000>;
 		};
 
-		opp@1200000000 {
+		opp-1200000000 {
 			opp-hz = /bits/ 64 <1200000000>;
 			opp-supported-hw = <0x0003>;
 			opp-peak-kBps = <19200000>;
diff --git a/dts/src/arm/tegra124-venice2.dts b/dts/src/arm/tegra124-venice2.dts
index e6b54ac1eb..232c90604d 100644
--- a/dts/src/arm/tegra124-venice2.dts
+++ b/dts/src/arm/tegra124-venice2.dts
@@ -51,7 +51,7 @@
 		};
 	};
 
-	gpu@0,57000000 {
+	gpu@57000000 {
 		/*
 		 * Node left disabled on purpose - the bootloader will enable
 		 * it after having set the VPR up
@@ -881,7 +881,8 @@
 	spi@7000da00 {
 		status = "okay";
 		spi-max-frequency = <25000000>;
-		spi-flash@0 {
+
+		flash@0 {
 			compatible = "winbond,w25q32dw", "jedec,spi-nor";
 			reg = <0>;
 			spi-max-frequency = <20000000>;
@@ -972,7 +973,7 @@
 			usb2-0 {
 				status = "okay";
 				mode = "otg";
-
+				usb-role-switch;
 				vbus-supply = <&vdd_usb1_vbus>;
 			};
 
@@ -1061,7 +1062,7 @@
 		default-brightness-level = <6>;
 	};
 
-	clk32k_in: clock@0 {
+	clk32k_in: clock-32k {
 		compatible = "fixed-clock";
 		clock-frequency = <32768>;
 		#clock-cells = <0>;
@@ -1086,7 +1087,7 @@
 		ddc-i2c-bus = <&dpaux>;
 	};
 
-	vdd_mux: regulator@0 {
+	vdd_mux: regulator-mux {
 		compatible = "regulator-fixed";
 		regulator-name = "+VDD_MUX";
 		regulator-min-microvolt = <12000000>;
@@ -1095,7 +1096,7 @@
 		regulator-boot-on;
 	};
 
-	vdd_5v0_sys: regulator@1 {
+	vdd_5v0_sys: regulator-5v0sys {
 		compatible = "regulator-fixed";
 		regulator-name = "+5V_SYS";
 		regulator-min-microvolt = <5000000>;
@@ -1105,7 +1106,7 @@
 		vin-supply = <&vdd_mux>;
 	};
 
-	vdd_3v3_sys: regulator@2 {
+	vdd_3v3_sys: regulator-3v3sys {
 		compatible = "regulator-fixed";
 		regulator-name = "+3.3V_SYS";
 		regulator-min-microvolt = <3300000>;
@@ -1115,7 +1116,7 @@
 		vin-supply = <&vdd_mux>;
 	};
 
-	vdd_3v3_run: regulator@3 {
+	vdd_3v3_run: regulator-3v3run {
 		compatible = "regulator-fixed";
 		regulator-name = "+3.3V_RUN";
 		regulator-min-microvolt = <3300000>;
@@ -1127,7 +1128,7 @@
 		vin-supply = <&vdd_3v3_sys>;
 	};
 
-	vdd_3v3_hdmi: regulator@4 {
+	vdd_3v3_hdmi: regulator-hdmi {
 		compatible = "regulator-fixed";
 		regulator-name = "+3.3V_AVDD_HDMI_AP_GATED";
 		regulator-min-microvolt = <3300000>;
@@ -1135,7 +1136,7 @@
 		vin-supply = <&vdd_3v3_run>;
 	};
 
-	vdd_led: regulator@5 {
+	vdd_led: regulator-led {
 		compatible = "regulator-fixed";
 		regulator-name = "+VDD_LED";
 		regulator-min-microvolt = <3300000>;
@@ -1145,7 +1146,7 @@
 		vin-supply = <&vdd_mux>;
 	};
 
-	vdd_5v0_ts: regulator@6 {
+	vdd_5v0_ts: regulator-ts {
 		compatible = "regulator-fixed";
 		regulator-name = "+5V_VDD_TS_SW";
 		regulator-min-microvolt = <5000000>;
@@ -1156,7 +1157,7 @@
 		vin-supply = <&vdd_5v0_sys>;
 	};
 
-	vdd_usb1_vbus: regulator@7 {
+	vdd_usb1_vbus: regulator-usb1 {
 		compatible = "regulator-fixed";
 		regulator-name = "+5V_USB_HS";
 		regulator-min-microvolt = <5000000>;
@@ -1167,7 +1168,7 @@
 		vin-supply = <&vdd_5v0_sys>;
 	};
 
-	vdd_usb3_vbus: regulator@8 {
+	vdd_usb3_vbus: regulator-usb3 {
 		compatible = "regulator-fixed";
 		regulator-name = "+5V_USB_SS";
 		regulator-min-microvolt = <5000000>;
@@ -1178,7 +1179,7 @@
 		vin-supply = <&vdd_5v0_sys>;
 	};
 
-	vdd_3v3_panel: regulator@9 {
+	vdd_3v3_panel: regulator-panel {
 		compatible = "regulator-fixed";
 		regulator-name = "+3.3V_PANEL";
 		regulator-min-microvolt = <3300000>;
@@ -1188,7 +1189,7 @@
 		vin-supply = <&vdd_3v3_run>;
 	};
 
-	vdd_3v3_lp0: regulator@10 {
+	vdd_3v3_lp0: regulator-lp0 {
 		compatible = "regulator-fixed";
 		regulator-name = "+3.3V_LP0";
 		regulator-min-microvolt = <3300000>;
@@ -1203,7 +1204,7 @@
 		vin-supply = <&vdd_3v3_sys>;
 	};
 
-	vdd_hdmi_pll: regulator@11 {
+	vdd_hdmi_pll: regulator-hdmipll {
 		compatible = "regulator-fixed";
 		regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL";
 		regulator-min-microvolt = <1050000>;
@@ -1212,7 +1213,7 @@
 		vin-supply = <&vdd_1v05_run>;
 	};
 
-	vdd_5v0_hdmi: regulator@12 {
+	vdd_5v0_hdmi: regulator-hdmicon {
 		compatible = "regulator-fixed";
 		regulator-name = "+5V_HDMI_CON";
 		regulator-min-microvolt = <5000000>;
diff --git a/dts/src/arm/tegra124.dtsi b/dts/src/arm/tegra124.dtsi
index 63a64171b4..a9ab548781 100644
--- a/dts/src/arm/tegra124.dtsi
+++ b/dts/src/arm/tegra124.dtsi
@@ -94,8 +94,8 @@
 		interrupt-names = "syncpt", "host1x";
 		clocks = <&tegra_car TEGRA124_CLK_HOST1X>;
 		clock-names = "host1x";
-		resets = <&tegra_car 28>;
-		reset-names = "host1x";
+		resets = <&tegra_car 28>, <&mc TEGRA124_MC_RESET_HC>;
+		reset-names = "host1x", "mc";
 		iommus = <&mc TEGRA_SWGROUP_HC>;
 
 		#address-cells = <2>;
@@ -223,12 +223,7 @@
 		interrupt-parent = <&gic>;
 	};
 
-	/*
-	 * Please keep the following 0, notation in place as a former mainline
-	 * U-Boot version was looking for that particular notation in order to
-	 * perform required fix-ups on that GPU node.
-	 */
-	gpu@0,57000000 {
+	gpu@57000000 {
 		compatible = "nvidia,gk20a";
 		reg = <0x0 0x57000000 0x0 0x01000000>,
 		      <0x0 0x58000000 0x0 0x01000000>;
@@ -259,7 +254,7 @@
 	};
 
 	timer@60005000 {
-		compatible = "nvidia,tegra124-timer", "nvidia,tegra30-timer", "nvidia,tegra20-timer";
+		compatible = "nvidia,tegra124-timer", "nvidia,tegra30-timer";
 		reg = <0x0 0x60005000 0x0 0x400>;
 		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
@@ -313,9 +308,7 @@
 		gpio-controller;
 		#interrupt-cells = <2>;
 		interrupt-controller;
-		/*
 		gpio-ranges = <&pinmux 0 0 251>;
-		*/
 	};
 
 	apbdma: dma@60020000 {
@@ -443,7 +436,7 @@
 	};
 
 	i2c@7000c000 {
-		compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
+		compatible = "nvidia,tegra124-i2c";
 		reg = <0x0 0x7000c000 0x0 0x100>;
 		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
@@ -458,7 +451,7 @@
 	};
 
 	i2c@7000c400 {
-		compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
+		compatible = "nvidia,tegra124-i2c";
 		reg = <0x0 0x7000c400 0x0 0x100>;
 		interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
@@ -473,7 +466,7 @@
 	};
 
 	i2c@7000c500 {
-		compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
+		compatible = "nvidia,tegra124-i2c";
 		reg = <0x0 0x7000c500 0x0 0x100>;
 		interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
@@ -488,7 +481,7 @@
 	};
 
 	i2c@7000c700 {
-		compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
+		compatible = "nvidia,tegra124-i2c";
 		reg = <0x0 0x7000c700 0x0 0x100>;
 		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
@@ -503,7 +496,7 @@
 	};
 
 	i2c@7000d000 {
-		compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
+		compatible = "nvidia,tegra124-i2c";
 		reg = <0x0 0x7000d000 0x0 0x100>;
 		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
@@ -518,7 +511,7 @@
 	};
 
 	i2c@7000d100 {
-		compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
+		compatible = "nvidia,tegra124-i2c";
 		reg = <0x0 0x7000d100 0x0 0x100>;
 		interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
@@ -677,10 +670,8 @@
 		      <0x0 0x70020000 0x0 0x7000>; /* SATA */
 		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA124_CLK_SATA>,
-			 <&tegra_car TEGRA124_CLK_SATA_OOB>,
-			 <&tegra_car TEGRA124_CLK_CML1>,
-			 <&tegra_car TEGRA124_CLK_PLL_E>;
-		clock-names = "sata", "sata-oob", "cml1", "pll_e";
+			 <&tegra_car TEGRA124_CLK_SATA_OOB>;
+		clock-names = "sata", "sata-oob";
 		resets = <&tegra_car 124>,
 			 <&tegra_car 129>,
 			 <&tegra_car 123>;
@@ -717,8 +708,8 @@
 			 <&tegra_car TEGRA124_CLK_XUSB_HOST_SRC>,
 			 <&tegra_car TEGRA124_CLK_XUSB_FALCON_SRC>,
 			 <&tegra_car TEGRA124_CLK_XUSB_SS>,
-			 <&tegra_car TEGRA124_CLK_XUSB_SS_SRC>,
 			 <&tegra_car TEGRA124_CLK_XUSB_SS_DIV2>,
+			 <&tegra_car TEGRA124_CLK_XUSB_SS_SRC>,
 			 <&tegra_car TEGRA124_CLK_XUSB_HS_SRC>,
 			 <&tegra_car TEGRA124_CLK_XUSB_FS_SRC>,
 			 <&tegra_car TEGRA124_CLK_PLL_U_480M>,
@@ -726,7 +717,7 @@
 			 <&tegra_car TEGRA124_CLK_PLL_E>;
 		clock-names = "xusb_host", "xusb_host_src",
 			      "xusb_falcon_src", "xusb_ss",
-			      "xusb_ss_src", "xusb_ss_div2",
+			      "xusb_ss_div2", "xusb_ss_src",
 			      "xusb_hs_src", "xusb_fs_src",
 			      "pll_u_480m", "clk_m", "pll_e";
 		resets = <&tegra_car 89>, <&tegra_car 156>,
@@ -1247,7 +1238,7 @@
 	};
 
 	thermal-zones {
-		cpu {
+		cpu-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <1000>;
 
@@ -1275,7 +1266,7 @@
 			};
 		};
 
-		mem {
+		mem-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <1000>;
 
@@ -1303,7 +1294,7 @@
 			};
 		};
 
-		gpu {
+		gpu-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <1000>;
 
@@ -1331,7 +1322,7 @@
 			};
 		};
 
-		pllx {
+		pllx-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <1000>;
 
diff --git a/dts/src/arm/tegra20-acer-a500-picasso.dts b/dts/src/arm/tegra20-acer-a500-picasso.dts
index 23d3f8daab..a170a4ba36 100644
--- a/dts/src/arm/tegra20-acer-a500-picasso.dts
+++ b/dts/src/arm/tegra20-acer-a500-picasso.dts
@@ -376,17 +376,27 @@
 		};
 	};
 
+	tegra_spdif: spdif@70002400 {
+		status = "okay";
+
+		nvidia,fixed-parent-rate;
+	};
+
 	tegra_i2s1: i2s@70002800 {
 		status = "okay";
+
+		nvidia,fixed-parent-rate;
 	};
 
 	uartb: serial@70006040 {
 		compatible = "nvidia,tegra20-hsuart";
+		/delete-property/ reg-shift;
 		/* GPS BCM4751 */
 	};
 
 	uartc: serial@70006200 {
 		compatible = "nvidia,tegra20-hsuart";
+		/delete-property/ reg-shift;
 		status = "okay";
 
 		/* Azurewave AW-NH665 BCM4329B1 */
@@ -716,6 +726,7 @@
 		nvidia,core-pwr-good-time = <3845 3845>;
 		nvidia,core-pwr-off-time = <458>;
 		nvidia,sys-clock-req-active-high;
+		core-supply = <&vdd_core>;
 	};
 
 	usb@c5000000 {
@@ -827,7 +838,7 @@
 	};
 
 	/* PMIC has a built-in 32KHz oscillator which is used by PMC */
-	clk32k_in: clock@0 {
+	clk32k_in: clock-32k-in {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <32768>;
@@ -839,7 +850,7 @@
 	 * oscillator is used as a reference clock-source by the
 	 * Azurewave WiFi/BT module.
 	 */
-	rtc_32k_wifi: clock@1 {
+	rtc_32k_wifi: clock-32k-wifi {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <32768>;
@@ -964,7 +975,7 @@
 		};
 	};
 
-	vdd_5v0_sys: regulator@0 {
+	vdd_5v0_sys: regulator-5v0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_5v0";
 		regulator-min-microvolt = <5000000>;
@@ -972,7 +983,7 @@
 		regulator-always-on;
 	};
 
-	vdd_3v3_sys: regulator@1 {
+	vdd_3v3_sys: regulator-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_3v3_vs";
 		regulator-min-microvolt = <3300000>;
@@ -981,7 +992,7 @@
 		vin-supply = <&vdd_5v0_sys>;
 	};
 
-	vdd_1v8_sys: regulator@2 {
+	vdd_1v8_sys: regulator-1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_1v8_vs";
 		regulator-min-microvolt = <1800000>;
@@ -990,7 +1001,7 @@
 		vin-supply = <&vdd_5v0_sys>;
 	};
 
-	vdd_pnl: regulator@3 {
+	vdd_pnl: regulator-panel {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_panel";
 		regulator-min-microvolt = <3300000>;
@@ -1506,6 +1517,6 @@
 };
 
 &emc_icc_dvfs_opp_table {
-	/delete-node/ opp@666000000;
-	/delete-node/ opp@760000000;
+	/delete-node/ opp-666000000;
+	/delete-node/ opp-760000000;
 };
diff --git a/dts/src/arm/tegra20-asus-tf101.dts b/dts/src/arm/tegra20-asus-tf101.dts
new file mode 100644
index 0000000000..020172ee73
--- /dev/null
+++ b/dts/src/arm/tegra20-asus-tf101.dts
@@ -0,0 +1,1280 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/input/atmel-maxtouch.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/thermal/thermal.h>
+
+#include "tegra20.dtsi"
+#include "tegra20-cpu-opp.dtsi"
+#include "tegra20-cpu-opp-microvolt.dtsi"
+
+/ {
+	model = "ASUS EeePad Transformer TF101";
+	compatible = "asus,tf101", "nvidia,tegra20";
+	chassis-type = "convertible";
+
+	aliases {
+		mmc0 = &sdmmc4; /* eMMC */
+		mmc1 = &sdmmc3; /* MicroSD */
+		mmc2 = &sdmmc1; /* WiFi */
+
+		rtc0 = &pmic;
+		rtc1 = "/rtc@7000e000";
+
+		serial0 = &uartd;
+		serial1 = &uartc; /* Bluetooth */
+		serial2 = &uartb; /* GPS */
+	};
+
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 */
+	chosen {};
+
+	memory@0 {
+		reg = <0x00000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		ramoops@2ffe0000 {
+			compatible = "ramoops";
+			reg = <0x2ffe0000 0x10000>;	/* 64kB */
+			console-size = <0x8000>;	/* 32kB */
+			record-size = <0x400>;		/*  1kB */
+			ecc-size = <16>;
+		};
+
+		linux,cma@30000000 {
+			compatible = "shared-dma-pool";
+			alloc-ranges = <0x30000000 0x10000000>;
+			size = <0x10000000>; /* 256MiB */
+			linux,cma-default;
+			reusable;
+		};
+	};
+
+	host1x@50000000 {
+		dc@54200000 {
+			rgb {
+				status = "okay";
+
+				port@0 {
+					lcd_output: endpoint {
+						remote-endpoint = <&lvds_encoder_input>;
+						bus-width = <18>;
+					};
+				};
+			};
+		};
+
+		hdmi@54280000 {
+			status = "okay";
+
+			vdd-supply = <&hdmi_vdd_reg>;
+			pll-supply = <&hdmi_pll_reg>;
+			hdmi-supply = <&vdd_hdmi_en>;
+
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+			nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7)
+				GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio@6000d000 {
+		charging-enable-hog {
+			gpio-hog;
+			gpios = <TEGRA_GPIO(R, 6) GPIO_ACTIVE_HIGH>;
+			output-low;
+		};
+	};
+
+	pinmux@70000014 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			ata {
+				nvidia,pins = "ata";
+				nvidia,function = "ide";
+			};
+
+			atb {
+				nvidia,pins = "atb", "gma", "gme";
+				nvidia,function = "sdio4";
+			};
+
+			atc {
+				nvidia,pins = "atc";
+				nvidia,function = "nand";
+			};
+
+			atd {
+				nvidia,pins = "atd", "ate", "gmb", "spia",
+					"spib", "spic";
+				nvidia,function = "gmi";
+			};
+
+			cdev1 {
+				nvidia,pins = "cdev1";
+				nvidia,function = "plla_out";
+			};
+
+			cdev2 {
+				nvidia,pins = "cdev2";
+				nvidia,function = "pllp_out4";
+			};
+
+			crtp {
+				nvidia,pins = "crtp";
+				nvidia,function = "crt";
+			};
+
+			lm1 {
+				nvidia,pins = "lm1";
+				nvidia,function = "rsvd3";
+			};
+
+			csus {
+				nvidia,pins = "csus";
+				nvidia,function = "vi_sensor_clk";
+			};
+
+			dap1 {
+				nvidia,pins = "dap1";
+				nvidia,function = "dap1";
+			};
+
+			dap2 {
+				nvidia,pins = "dap2";
+				nvidia,function = "dap2";
+			};
+
+			dap3 {
+				nvidia,pins = "dap3";
+				nvidia,function = "dap3";
+			};
+
+			dap4 {
+				nvidia,pins = "dap4";
+				nvidia,function = "dap4";
+			};
+
+			dta {
+				nvidia,pins = "dta", "dtb", "dtc", "dtd", "dte";
+				nvidia,function = "vi";
+			};
+
+			dtf {
+				nvidia,pins = "dtf";
+				nvidia,function = "i2c3";
+			};
+
+			gmc {
+				nvidia,pins = "gmc";
+				nvidia,function = "uartd";
+			};
+
+			gmd {
+				nvidia,pins = "gmd";
+				nvidia,function = "sflash";
+			};
+
+			gpu {
+				nvidia,pins = "gpu";
+				nvidia,function = "pwm";
+			};
+
+			gpu7 {
+				nvidia,pins = "gpu7";
+				nvidia,function = "rtck";
+			};
+
+			gpv {
+				nvidia,pins = "gpv", "slxa";
+				nvidia,function = "pcie";
+			};
+
+			hdint {
+				nvidia,pins = "hdint";
+				nvidia,function = "hdmi";
+			};
+
+			i2cp {
+				nvidia,pins = "i2cp";
+				nvidia,function = "i2cp";
+			};
+
+			irrx {
+				nvidia,pins = "irrx", "irtx";
+				nvidia,function = "uartb";
+			};
+
+			kbca {
+				nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd",
+					"kbce", "kbcf";
+				nvidia,function = "kbc";
+			};
+
+			lcsn {
+				nvidia,pins = "lcsn", "ldc", "lm0", "lpw1",
+					"lsdi", "lvp0";
+				nvidia,function = "rsvd4";
+			};
+
+			ld0 {
+				nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
+					"ld5", "ld6", "ld7", "ld8", "ld9",
+					"ld10", "ld11", "ld12", "ld13", "ld14",
+					"ld15", "ld16", "ld17", "ldi", "lhp0",
+					"lhp1", "lhp2", "lhs", "lpp", "lpw0",
+					"lpw2", "lsc0", "lsc1", "lsck", "lsda",
+					"lspi", "lvp1", "lvs";
+				nvidia,function = "displaya";
+			};
+
+			owc {
+				nvidia,pins = "owc", "spdi", "spdo", "uac";
+				nvidia,function = "rsvd2";
+			};
+
+			pmc {
+				nvidia,pins = "pmc";
+				nvidia,function = "pwr_on";
+			};
+
+			rm {
+				nvidia,pins = "rm";
+				nvidia,function = "i2c1";
+			};
+
+			sdb {
+				nvidia,pins = "sdb", "sdc", "sdd", "slxc", "slxk";
+				nvidia,function = "sdio3";
+			};
+
+			sdio1 {
+				nvidia,pins = "sdio1";
+				nvidia,function = "sdio1";
+			};
+
+			slxd {
+				nvidia,pins = "slxd";
+				nvidia,function = "spdif";
+			};
+
+			spid {
+				nvidia,pins = "spid", "spie", "spif";
+				nvidia,function = "spi1";
+			};
+
+			spig {
+				nvidia,pins = "spig", "spih";
+				nvidia,function = "spi2_alt";
+			};
+
+			uaa {
+				nvidia,pins = "uaa", "uab", "uda";
+				nvidia,function = "ulpi";
+			};
+
+			uad {
+				nvidia,pins = "uad";
+				nvidia,function = "irda";
+			};
+
+			uca {
+				nvidia,pins = "uca", "ucb";
+				nvidia,function = "uartc";
+			};
+
+			conf_ata {
+				nvidia,pins = "ata", "atb", "atc", "atd",
+					"cdev1", "cdev2", "dap1", "dap4",
+					"dte", "ddc", "dtf", "gma", "gmc",
+					"gme", "gpu", "gpu7", "gpv", "i2cp",
+					"irrx", "irtx", "pta", "rm", "sdc",
+					"sdd", "slxc", "slxd", "slxk", "spdi",
+					"spdo", "uac", "uad",
+					"uda", "csus";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			conf_ate {
+				nvidia,pins = "ate", "dap2", "dap3", "gmb", "gmd",
+					"owc", "spia", "spib", "spic",
+					"spid", "spie", "spig", "slxa";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+
+			conf_ck32 {
+				nvidia,pins = "ck32", "ddrc", "pmca", "pmcb",
+					"pmcc", "pmcd", "pmce", "xm2c", "xm2d";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+			};
+
+			conf_crtp {
+				nvidia,pins = "crtp", "spih";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+
+			conf_dta {
+				nvidia,pins = "dta", "dtb", "dtc", "dtd";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			conf_spif {
+				nvidia,pins = "spif";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+
+			conf_hdint {
+				nvidia,pins = "hdint", "lcsn", "ldc", "lm1",
+					"lpw1", "lsck", "lsda", "lsdi", "lvp0";
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+
+			conf_kbca {
+				nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd",
+					"kbce", "kbcf", "sdio1", "uaa", "uab",
+					"uca", "ucb";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			conf_lc {
+				nvidia,pins = "lc", "ls";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+			};
+
+			conf_ld0 {
+				nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
+					"ld5", "ld6", "ld7", "ld8", "ld9",
+					"ld10", "ld11", "ld12", "ld13", "ld14",
+					"ld15", "ld16", "ld17", "ldi", "lhp0",
+					"lhp1", "lhp2", "lhs", "lm0", "lpp",
+					"lpw0", "lpw2", "lsc0", "lsc1", "lspi",
+					"lvp1", "lvs", "pmc", "sdb";
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			conf_ld17_0 {
+				nvidia,pins = "ld17_0", "ld19_18", "ld21_20",
+					"ld23_22";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+			};
+
+			drive_sdio1 {
+				nvidia,pins = "drive_sdio1", "drive_ddc", "drive_vi1";
+				nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
+				nvidia,schmitt = <TEGRA_PIN_ENABLE>;
+				nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
+				nvidia,pull-down-strength = <31>;
+				nvidia,pull-up-strength = <31>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+			};
+
+			drive_csus {
+				nvidia,pins = "drive_csus";
+				nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
+				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+				nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
+				nvidia,pull-down-strength = <31>;
+				nvidia,pull-up-strength = <31>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+			};
+		};
+
+		state_i2cmux_ddc: pinmux_i2cmux_ddc {
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "i2c2";
+			};
+
+			pta {
+				nvidia,pins = "pta";
+				nvidia,function = "rsvd4";
+			};
+		};
+
+		state_i2cmux_pta: pinmux_i2cmux_pta {
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "rsvd4";
+			};
+
+			pta {
+				nvidia,pins = "pta";
+				nvidia,function = "i2c2";
+			};
+		};
+
+		state_i2cmux_idle: pinmux_i2cmux_idle {
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "rsvd4";
+			};
+
+			pta {
+				nvidia,pins = "pta";
+				nvidia,function = "rsvd4";
+			};
+		};
+	};
+
+	i2s@70002800 {
+		status = "okay";
+	};
+
+	serial@70006040 {
+		compatible = "nvidia,tegra20-hsuart";
+		/* GPS BCM4751 */
+	};
+
+	serial@70006200 {
+		compatible = "nvidia,tegra20-hsuart";
+		status = "okay";
+
+		/* Azurewave AW-NH615 BCM4329B1 */
+		bluetooth {
+			compatible = "brcm,bcm4329-bt";
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(U, 6) IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "host-wakeup";
+
+			/* PLLP 216MHz / 16 / 4 */
+			max-speed = <3375000>;
+
+			clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>;
+			clock-names = "txco";
+
+			vbat-supply  = <&vdd_3v3_sys>;
+			vddio-supply = <&vdd_1v8_sys>;
+
+			device-wakeup-gpios = <&gpio TEGRA_GPIO(U, 1) GPIO_ACTIVE_HIGH>;
+			shutdown-gpios =      <&gpio TEGRA_GPIO(U, 0) GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	serial@70006300 {
+		status = "okay";
+	};
+
+	pwm@7000a000 {
+		status = "okay";
+	};
+
+	i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		/* Aichi AMI306 digital compass */
+		magnetometer@e {
+			compatible = "asahi-kasei,ak8974";
+			reg = <0xe>;
+
+			avdd-supply = <&vdd_3v3_sys>;
+			dvdd-supply = <&vdd_1v8_sys>;
+
+			mount-matrix = "-1",  "0",  "0",
+					"0",  "1",  "0",
+					"0",  "0", "-1";
+		};
+
+		wm8903: audio-codec@1a {
+			compatible = "wlf,wm8903";
+			reg = <0x1a>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(X, 1) IRQ_TYPE_EDGE_BOTH>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			micdet-cfg = <0x83>;
+			micdet-delay = <100>;
+
+			gpio-cfg = <
+				0xffffffff /* don't touch */
+				0xffffffff /* don't touch */
+				0x00000000 /* Speaker-enable GPIO, output, low */
+				0x00000400 /* Mic bias current detect */
+				0xffffffff /* don't touch */
+			>;
+
+			AVDD-supply  = <&vdd_1v8_sys>;
+			CPVDD-supply = <&vdd_1v8_sys>;
+			DBVDD-supply = <&vdd_1v8_sys>;
+			DCVDD-supply = <&vdd_1v8_sys>;
+		};
+
+		/* Atmel MXT1386 Touchscreen */
+		touchscreen@5b {
+			compatible = "atmel,maxtouch";
+			reg = <0x5b>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(V, 6) IRQ_TYPE_LEVEL_LOW>;
+
+			reset-gpios = <&gpio TEGRA_GPIO(Q, 7) GPIO_ACTIVE_LOW>;
+
+			vdda-supply = <&vdd_3v3_sys>;
+			vdd-supply  = <&vdd_3v3_sys>;
+
+			atmel,wakeup-method = <ATMEL_MXT_WAKEUP_I2C_SCL>;
+		};
+
+		gyroscope@68 {
+			compatible = "invensense,mpu3050";
+			reg = <0x68>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(Z, 4) IRQ_TYPE_EDGE_RISING>;
+
+			vdd-supply    = <&vdd_3v3_sys>;
+			vlogic-supply = <&vdd_1v8_sys>;
+
+			mount-matrix =	 "0",  "1",  "0",
+					"-1",  "0",  "0",
+					 "0",  "0",  "1";
+
+			i2c-gate {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				accelerometer@f {
+					compatible = "kionix,kxtf9";
+					reg = <0xf>;
+
+					interrupt-parent = <&gpio>;
+					interrupts = <TEGRA_GPIO(N, 4) IRQ_TYPE_EDGE_RISING>;
+
+					vdd-supply = <&vdd_1v8_sys>;
+					vddio-supply = <&vdd_1v8_sys>;
+
+					mount-matrix =	 "1",  "0",  "0",
+							 "0",  "1",  "0",
+							 "0",  "0",  "1";
+				};
+			};
+		};
+	};
+
+	i2c2: i2c@7000c400 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000c500 {
+		status = "okay";
+		clock-frequency = <400000>;
+	};
+
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		pmic: pmic@34 {
+			compatible = "ti,tps6586x";
+			reg = <0x34>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+
+			ti,system-power-controller;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			sys-supply = <&vdd_5v0_sys>;
+			vin-sm0-supply = <&sys_reg>;
+			vin-sm1-supply = <&sys_reg>;
+			vin-sm2-supply = <&sys_reg>;
+			vinldo01-supply = <&sm2_reg>;
+			vinldo23-supply = <&sm2_reg>;
+			vinldo4-supply = <&sm2_reg>;
+			vinldo678-supply = <&sm2_reg>;
+			vinldo9-supply = <&sm2_reg>;
+
+			regulators {
+				sys_reg: sys {
+					regulator-name = "vdd_sys";
+					regulator-always-on;
+				};
+
+				vdd_core: sm0 {
+					regulator-name = "vdd_sm0,vdd_core";
+					regulator-min-microvolt = <950000>;
+					regulator-max-microvolt = <1300000>;
+					regulator-coupled-with = <&rtc_vdd &vdd_cpu>;
+					regulator-coupled-max-spread = <170000 550000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					nvidia,tegra-core-regulator;
+				};
+
+				vdd_cpu: sm1 {
+					regulator-name = "vdd_sm1,vdd_cpu";
+					regulator-min-microvolt = <750000>;
+					regulator-max-microvolt = <1125000>;
+					regulator-coupled-with = <&vdd_core &rtc_vdd>;
+					regulator-coupled-max-spread = <550000 550000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					nvidia,tegra-cpu-regulator;
+				};
+
+				sm2_reg: sm2 {
+					regulator-name = "vdd_sm2,vin_ldo*";
+					regulator-min-microvolt = <3700000>;
+					regulator-max-microvolt = <3700000>;
+					regulator-always-on;
+				};
+
+				/* LDO0 is not connected to anything */
+
+				ldo1 {
+					regulator-name = "vdd_ldo1,avdd_pll*";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-always-on;
+				};
+
+				rtc_vdd: ldo2 {
+					regulator-name = "vdd_ldo2,vdd_rtc";
+					regulator-min-microvolt = <950000>;
+					regulator-max-microvolt = <1300000>;
+					regulator-coupled-with = <&vdd_core &vdd_cpu>;
+					regulator-coupled-max-spread = <170000 550000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					nvidia,tegra-rtc-regulator;
+				};
+
+				ldo3 {
+					regulator-name = "vdd_ldo3,avdd_usb*";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				ldo4 {
+					regulator-name = "vdd_ldo4,avdd_osc,vddio_sys";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				vcore_emmc: ldo5 {
+					regulator-name = "vdd_ldo5,vcore_mmc";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					regulator-always-on;
+				};
+
+				ldo6 {
+					regulator-name = "vdd_ldo6,avdd_vdac";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				hdmi_vdd_reg: ldo7 {
+					regulator-name = "vdd_ldo7,avdd_hdmi,vdd_fuse";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				hdmi_pll_reg: ldo8 {
+					regulator-name = "vdd_ldo8,avdd_hdmi_pll";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo9 {
+					regulator-name = "vdd_ldo9,avdd_2v85,vdd_ddr_rx";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					regulator-always-on;
+				};
+
+				ldo_rtc {
+					regulator-name = "vdd_rtc_out,vdd_cell";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+			};
+		};
+
+		nct1008: temperature-sensor@4c {
+			compatible = "onnn,nct1008";
+			reg = <0x4c>;
+			vcc-supply = <&vdd_3v3_sys>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(N, 6) IRQ_TYPE_EDGE_FALLING>;
+
+			#thermal-sensor-cells = <1>;
+		};
+	};
+
+	pmc@7000e400 {
+		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <1>;
+		nvidia,cpu-pwr-good-time = <2000>;
+		nvidia,cpu-pwr-off-time = <100>;
+		nvidia,core-pwr-good-time = <3845 3845>;
+		nvidia,core-pwr-off-time = <458>;
+		nvidia,sys-clock-req-active-high;
+		core-supply = <&vdd_core>;
+	};
+
+	memory-controller@7000f400 {
+		nvidia,use-ram-code;
+
+		emc-tables@3 {
+			reg = <0x3>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			lpddr2 {
+				compatible = "elpida,B8132B2PB-6D-F", "jedec,lpddr2-s4";
+				revision-id1 = <1>;
+				density = <2048>;
+				io-width = <16>;
+			};
+
+			emc-table@25000 {
+				reg = <25000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <25000>;
+				nvidia,emc-registers = <0x00000002 0x00000006
+					0x00000003 0x00000003 0x00000006 0x00000004
+					0x00000002 0x00000009 0x00000003 0x00000003
+					0x00000002 0x00000002 0x00000002 0x00000004
+					0x00000003 0x00000008 0x0000000b 0x0000004d
+					0x00000000 0x00000003 0x00000003 0x00000003
+					0x00000008 0x00000001 0x0000000a 0x00000004
+					0x00000003 0x00000008 0x00000004 0x00000006
+					0x00000002 0x00000068 0x00000000 0x00000003
+					0x00000000 0x00000000 0x00000282 0xa0ae04ae
+					0x00070000 0x00000000 0x00000000 0x00000003
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+
+			emc-table@50000 {
+				reg = <50000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <50000>;
+				nvidia,emc-registers = <0x00000003 0x00000007
+					0x00000003 0x00000003 0x00000006 0x00000004
+					0x00000002 0x00000009 0x00000003 0x00000003
+					0x00000002 0x00000002 0x00000002 0x00000005
+					0x00000003 0x00000008 0x0000000b 0x0000009f
+					0x00000000 0x00000003 0x00000003 0x00000003
+					0x00000008 0x00000001 0x0000000a 0x00000007
+					0x00000003 0x00000008 0x00000004 0x00000006
+					0x00000002 0x000000d0 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000282 0xa0ae04ae
+					0x00070000 0x00000000 0x00000000 0x00000005
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+
+			emc-table@75000 {
+				reg = <75000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <75000>;
+				nvidia,emc-registers = <0x00000005 0x0000000a
+					0x00000004 0x00000003 0x00000006 0x00000004
+					0x00000002 0x00000009 0x00000003 0x00000003
+					0x00000002 0x00000002 0x00000002 0x00000005
+					0x00000003 0x00000008 0x0000000b 0x000000ff
+					0x00000000 0x00000003 0x00000003 0x00000003
+					0x00000008 0x00000001 0x0000000a 0x0000000b
+					0x00000003 0x00000008 0x00000004 0x00000006
+					0x00000002 0x00000138 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000282 0xa0ae04ae
+					0x00070000 0x00000000 0x00000000 0x00000007
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+
+			emc-table@150000 {
+				reg = <150000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <150000>;
+				nvidia,emc-registers = <0x00000009 0x00000014
+					0x00000007 0x00000003 0x00000006 0x00000004
+					0x00000002 0x00000009 0x00000003 0x00000003
+					0x00000002 0x00000002 0x00000002 0x00000005
+					0x00000003 0x00000008 0x0000000b 0x0000021f
+					0x00000000 0x00000003 0x00000003 0x00000003
+					0x00000008 0x00000001 0x0000000a 0x00000015
+					0x00000003 0x00000008 0x00000004 0x00000006
+					0x00000002 0x00000270 0x00000000 0x00000001
+					0x00000000 0x00000000 0x00000282 0xa07c04ae
+					0x007dc010 0x00000000 0x00000000 0x0000000e
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+
+			emc-table@300000 {
+				reg = <300000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <300000>;
+				nvidia,emc-registers = <0x00000012 0x00000027
+					0x0000000d 0x00000006 0x00000007 0x00000005
+					0x00000003 0x00000009 0x00000006 0x00000006
+					0x00000003 0x00000003 0x00000002 0x00000006
+					0x00000003 0x00000009 0x0000000c 0x0000045f
+					0x00000000 0x00000004 0x00000004 0x00000006
+					0x00000008 0x00000001 0x0000000e 0x0000002a
+					0x00000003 0x0000000f 0x00000007 0x00000005
+					0x00000002 0x000004e0 0x00000005 0x00000002
+					0x00000000 0x00000000 0x00000282 0xe059048b
+					0x007e0010 0x00000000 0x00000000 0x0000001b
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+		};
+	};
+
+	/* Peripheral USB via ASUS connector */
+	usb@c5000000 {
+		compatible = "nvidia,tegra20-udc";
+		status = "okay";
+		dr_mode = "peripheral";
+	};
+
+	usb-phy@c5000000 {
+		status = "okay";
+		dr_mode = "peripheral";
+		nvidia,xcvr-setup-use-fuses;
+		nvidia,xcvr-lsfslew = <2>;
+		nvidia,xcvr-lsrslew = <2>;
+		vbus-supply = <&vdd_5v0_sys>;
+	};
+
+	/* Dock's USB port */
+	usb@c5008000 {
+		status = "okay";
+	};
+
+	usb-phy@c5008000 {
+		status = "okay";
+		nvidia,xcvr-setup-use-fuses;
+		vbus-supply = <&vdd_5v0_sys>;
+	};
+
+	sdmmc1: mmc@c8000000 {
+		status = "okay";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		assigned-clocks = <&tegra_car TEGRA20_CLK_SDMMC1>;
+		assigned-clock-parents = <&tegra_car TEGRA20_CLK_PLL_C>;
+		assigned-clock-rates = <40000000>;
+
+		max-frequency = <40000000>;
+		keep-power-in-suspend;
+		bus-width = <4>;
+		non-removable;
+
+		mmc-pwrseq = <&brcm_wifi_pwrseq>;
+		vmmc-supply = <&vdd_3v3_sys>;
+		vqmmc-supply = <&vdd_3v3_sys>;
+
+		/* Azurewave AW-NH615 BCM4329B1 */
+		wifi@1 {
+			compatible = "brcm,bcm4329-fmac";
+			reg = <1>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(S, 0) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "host-wake";
+		};
+	};
+
+	sdmmc3: mmc@c8000400 {
+		status = "okay";
+		bus-width = <4>;
+		cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
+		wp-gpios = <&gpio TEGRA_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
+		power-gpios = <&gpio TEGRA_GPIO(I, 6) GPIO_ACTIVE_HIGH>;
+		vmmc-supply = <&vdd_3v3_sys>;
+		vqmmc-supply = <&vdd_3v3_sys>;
+	};
+
+	sdmmc4: mmc@c8000600 {
+		status = "okay";
+		bus-width = <8>;
+		vmmc-supply = <&vcore_emmc>;
+		vqmmc-supply = <&vdd_3v3_sys>;
+		non-removable;
+	};
+
+	mains: ac-adapter-detect {
+		compatible = "gpio-charger";
+		charger-type = "mains";
+		gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_LOW>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+
+		enable-gpios = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
+		power-supply = <&vdd_3v3_sys>;
+		pwms = <&pwm 2 4000000>;
+
+		brightness-levels = <7 255>;
+		num-interpolated-steps = <248>;
+		default-brightness-level = <20>;
+	};
+
+	/* PMIC has a built-in 32KHz oscillator which is used by PMC */
+	clk32k_in: clock-32k-in {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		#clock-cells = <0>;
+	};
+
+	cpus {
+		cpu0: cpu@0 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		dock-hall-sensor {
+			label = "Lid";
+			gpios = <&gpio TEGRA_GPIO(S, 4) GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			debounce-interval = <500>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		volume-up {
+			label = "Volume Up";
+			gpios = <&gpio TEGRA_GPIO(Q, 5) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		volume-down {
+			label = "Volume Down";
+			gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+	};
+
+	display-panel {
+		compatible = "panel-lvds";
+
+		/* AUO B101EW05 using custom timings */
+
+		backlight = <&backlight>;
+		ddc-i2c-bus = <&lvds_ddc>;
+		power-supply = <&vdd_pnl_reg>;
+
+		width-mm = <218>;
+		height-mm = <135>;
+
+		data-mapping = "jeida-18";
+
+		panel-timing {
+			clock-frequency = <71200000>;
+			hactive = <1280>;
+			vactive = <800>;
+			hfront-porch = <8>;
+			hback-porch = <18>;
+			hsync-len = <184>;
+			vsync-len = <3>;
+			vfront-porch = <4>;
+			vback-porch = <8>;
+		};
+
+		port {
+			panel_input: endpoint {
+				remote-endpoint = <&lvds_encoder_output>;
+			};
+		};
+	};
+
+	i2cmux {
+		compatible = "i2c-mux-pinctrl";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c-parent = <&i2c2>;
+
+		pinctrl-names = "ddc", "pta", "idle";
+		pinctrl-0 = <&state_i2cmux_ddc>;
+		pinctrl-1 = <&state_i2cmux_pta>;
+		pinctrl-2 = <&state_i2cmux_idle>;
+
+		hdmi_ddc: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		lvds_ddc: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			smart-battery@b {
+				compatible = "ti,bq20z75", "sbs,sbs-battery";
+				reg = <0xb>;
+				sbs,i2c-retry-count = <2>;
+				sbs,poll-retry-count = <10>;
+				power-supplies = <&mains>;
+			};
+		};
+	};
+
+	lvds-encoder {
+		compatible = "ti,sn75lvds83", "lvds-encoder";
+
+		powerdown-gpios = <&gpio TEGRA_GPIO(B, 2) GPIO_ACTIVE_LOW>;
+		power-supply = <&vdd_3v3_sys>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lvds_encoder_input: endpoint {
+					remote-endpoint = <&lcd_output>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				lvds_encoder_output: endpoint {
+					remote-endpoint = <&panel_input>;
+				};
+			};
+		};
+	};
+
+	vdd_5v0_sys: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	vdd_3v3_sys: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v3_vs";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	regulator-pcie {
+		compatible = "regulator-fixed";
+		regulator-name = "pcie_vdd";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
+		regulator-always-on;
+	};
+
+	vdd_pnl_reg: regulator-panel {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_pnl";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&gpio TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vdd_1v8_sys: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_1v8_vs";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	vdd_hdmi_en: regulator-hdmi {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v0_hdmi_en";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		vin-supply = <&vdd_5v0_sys>;
+		gpio = <&gpio TEGRA_GPIO(V, 5) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	sound {
+		compatible = "asus,tegra-audio-wm8903-tf101",
+			     "nvidia,tegra-audio-wm8903";
+		nvidia,model = "Asus EeePad Transformer WM8903";
+
+		nvidia,audio-routing =
+			"Headphone Jack", "HPOUTR",
+			"Headphone Jack", "HPOUTL",
+			"Int Spk", "ROP",
+			"Int Spk", "RON",
+			"Int Spk", "LOP",
+			"Int Spk", "LON",
+			"Mic Jack", "MICBIAS",
+			"IN1L", "Mic Jack";
+
+		nvidia,i2s-controller = <&tegra_i2s1>;
+		nvidia,audio-codec = <&wm8903>;
+
+		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
+		nvidia,headset;
+
+		clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
+			 <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
+			 <&tegra_car TEGRA20_CLK_CDEV1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+	};
+
+	thermal-zones {
+		/*
+		 * NCT1008 has two sensors:
+		 *
+		 *	0: internal that monitors ambient/skin temperature
+		 *	1: external that is connected to the CPU's diode
+		 *
+		 * Ideally we should use userspace thermal governor,
+		 * but it's a much more complex solution.  The "skin"
+		 * zone is a simpler solution which prevents TF101 from
+		 * getting too hot from a user's tactile perspective.
+		 * The CPU zone is intended to protect silicon from damage.
+		 */
+
+		skin-thermal {
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <5000>; /* milliseconds */
+
+			thermal-sensors = <&nct1008 0>;
+
+			trips {
+				trip0: skin-alert {
+					/* start throttling at 60C */
+					temperature = <60000>;
+					hysteresis = <200>;
+					type = "passive";
+				};
+
+				trip1: skin-crit {
+					/* shut down at 70C */
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&trip0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu-thermal {
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <5000>; /* milliseconds */
+
+			thermal-sensors = <&nct1008 1>;
+
+			trips {
+				trip2: cpu-alert {
+					/* throttle at 85C until temperature drops to 84.8C */
+					temperature = <85000>;
+					hysteresis = <200>;
+					type = "passive";
+				};
+
+				trip3: cpu-crit {
+					/* shut down at 90C */
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map1 {
+					trip = <&trip2>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	brcm_wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+
+		clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>;
+		clock-names = "ext_clock";
+
+		reset-gpios = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_LOW>;
+		post-power-on-delay-ms = <200>;
+		power-off-delay-us = <200>;
+	};
+};
+
+&emc_icc_dvfs_opp_table {
+	/delete-node/ opp-666000000;
+	/delete-node/ opp-760000000;
+};
diff --git a/dts/src/arm/tegra20-colibri-eval-v3.dts b/dts/src/arm/tegra20-colibri-eval-v3.dts
index a05fb3853d..d2a3bf9d28 100644
--- a/dts/src/arm/tegra20-colibri-eval-v3.dts
+++ b/dts/src/arm/tegra20-colibri-eval-v3.dts
@@ -70,11 +70,11 @@
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 			};
 
-			pwm-a-b {
+			sdc {
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 			};
 
-			pwm-c-d {
+			sdb_sdd {
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 			};
 
diff --git a/dts/src/arm/tegra20-colibri-iris.dts b/dts/src/arm/tegra20-colibri-iris.dts
index 425494b9ed..00ecbbd5e9 100644
--- a/dts/src/arm/tegra20-colibri-iris.dts
+++ b/dts/src/arm/tegra20-colibri-iris.dts
@@ -70,11 +70,11 @@
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 			};
 
-			pwm-a-b {
+			sdc {
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 			};
 
-			pwm-c-d {
+			sdb_sdd {
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 			};
 
diff --git a/dts/src/arm/tegra20-colibri.dtsi b/dts/src/arm/tegra20-colibri.dtsi
index 585a5b441c..1eefb9ee4a 100644
--- a/dts/src/arm/tegra20-colibri.dtsi
+++ b/dts/src/arm/tegra20-colibri.dtsi
@@ -113,7 +113,7 @@
 			};
 
 			/* Colibri Backlight PWM<A>, PWM<B> */
-			pwm-a-b {
+			sdc {
 				nvidia,pins = "sdc";
 				nvidia,function = "pwm";
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
@@ -242,7 +242,7 @@
 			};
 
 			/* Colibri PWM<C>, PWM<D> */
-			pwm-c-d {
+			sdb_sdd {
 				nvidia,pins = "sdb", "sdd";
 				nvidia,function = "pwm";
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
@@ -428,10 +428,12 @@
 
 	serial@70006040 {
 		compatible = "nvidia,tegra20-hsuart";
+		/delete-property/ reg-shift;
 	};
 
 	serial@70006300 {
 		compatible = "nvidia,tegra20-hsuart";
+		/delete-property/ reg-shift;
 	};
 
 	nand-controller@70008000 {
@@ -495,7 +497,7 @@
 					regulator-always-on;
 				};
 
-				sm0 {
+				vdd_core: sm0 {
 					regulator-name = "VDD_CORE_1.2V";
 					regulator-min-microvolt = <1200000>;
 					regulator-max-microvolt = <1200000>;
@@ -601,6 +603,7 @@
 		nvidia,core-pwr-good-time = <3845 3845>;
 		nvidia,core-pwr-off-time = <3875>;
 		nvidia,sys-clock-req-active-high;
+		core-supply = <&vdd_core>;
 
 		/* Set SLEEP MODE bit in SUPPLYENE register of TPS658643 PMIC */
 		i2c-thermtrip {
@@ -689,6 +692,7 @@
 		#size-cells = <0>;
 
 		asix@1 {
+			compatible = "usbb95,772b";
 			reg = <1>;
 			local-mac-address = [00 00 00 00 00 00];
 		};
@@ -743,11 +747,11 @@
 };
 
 &emc_icc_dvfs_opp_table {
-	/delete-node/ opp@760000000;
+	/delete-node/ opp-760000000;
 };
 
 &gpio {
-	lan-reset-n {
+	lan-reset-n-hog {
 		gpio-hog;
 		gpios = <TEGRA_GPIO(V, 4) GPIO_ACTIVE_HIGH>;
 		output-high;
@@ -755,7 +759,7 @@
 	};
 
 	/* Tri-stating GMI_WR_N on SODIMM pin 99 nPWE */
-	npwe {
+	npwe-hog {
 		gpio-hog;
 		gpios = <TEGRA_GPIO(T, 5) GPIO_ACTIVE_HIGH>;
 		output-high;
@@ -763,7 +767,7 @@
 	};
 
 	/* Not tri-stating GMI_WR_N on SODIMM pin 93 RDnWR */
-	rdnwr {
+	rdnwr-hog {
 		gpio-hog;
 		gpios = <TEGRA_GPIO(T, 6) GPIO_ACTIVE_HIGH>;
 		output-low;
diff --git a/dts/src/arm/tegra20-cpu-opp-microvolt.dtsi b/dts/src/arm/tegra20-cpu-opp-microvolt.dtsi
index 6f3e8c5fc5..7330c1b13d 100644
--- a/dts/src/arm/tegra20-cpu-opp-microvolt.dtsi
+++ b/dts/src/arm/tegra20-cpu-opp-microvolt.dtsi
@@ -1,164 +1,164 @@
 // SPDX-License-Identifier: GPL-2.0
 
 / {
-	cpu0_opp_table: cpu_opp_table0 {
-		opp@216000000,750 {
+	cpu0_opp_table: opp-table-cpu0 {
+		opp-216000000-750 {
 			opp-microvolt = <750000 750000 1125000>;
 		};
 
-		opp@216000000,800 {
+		opp-216000000-800 {
 			opp-microvolt = <800000 800000 1125000>;
 		};
 
-		opp@312000000,750 {
+		opp-312000000-750 {
 			opp-microvolt = <750000 750000 1125000>;
 		};
 
-		opp@312000000,800 {
+		opp-312000000-800 {
 			opp-microvolt = <800000 800000 1125000>;
 		};
 
-		opp@456000000,750 {
+		opp-456000000-750 {
 			opp-microvolt = <750000 750000 1125000>;
 		};
 
-		opp@456000000,800 {
+		opp-456000000-800 {
 			opp-microvolt = <800000 800000 1125000>;
 		};
 
-		opp@456000000,825 {
+		opp-456000000-825 {
 			opp-microvolt = <825000 825000 1125000>;
 		};
 
-		opp@608000000,750 {
+		opp-608000000-750 {
 			opp-microvolt = <750000 750000 1125000>;
 		};
 
-		opp@608000000,800 {
+		opp-608000000-800 {
 			opp-microvolt = <800000 800000 1125000>;
 		};
 
-		opp@608000000,825 {
+		opp-608000000-825 {
 			opp-microvolt = <825000 825000 1125000>;
 		};
 
-		opp@608000000,850 {
+		opp-608000000-850 {
 			opp-microvolt = <850000 850000 1125000>;
 		};
 
-		opp@608000000,900 {
+		opp-608000000-900 {
 			opp-microvolt = <900000 900000 1125000>;
 		};
 
-		opp@760000000,775 {
+		opp-760000000-775 {
 			opp-microvolt = <775000 775000 1125000>;
 		};
 
-		opp@760000000,800 {
+		opp-760000000-800 {
 			opp-microvolt = <800000 800000 1125000>;
 		};
 
-		opp@760000000,850 {
+		opp-760000000-850 {
 			opp-microvolt = <850000 850000 1125000>;
 		};
 
-		opp@760000000,875 {
+		opp-760000000-875 {
 			opp-microvolt = <875000 875000 1125000>;
 		};
 
-		opp@760000000,900 {
+		opp-760000000-900 {
 			opp-microvolt = <900000 900000 1125000>;
 		};
 
-		opp@760000000,975 {
+		opp-760000000-975 {
 			opp-microvolt = <975000 975000 1125000>;
 		};
 
-		opp@816000000,800 {
+		opp-816000000-800 {
 			opp-microvolt = <800000 800000 1125000>;
 		};
 
-		opp@816000000,850 {
+		opp-816000000-850 {
 			opp-microvolt = <850000 850000 1125000>;
 		};
 
-		opp@816000000,875 {
+		opp-816000000-875 {
 			opp-microvolt = <875000 875000 1125000>;
 		};
 
-		opp@816000000,950 {
+		opp-816000000-950 {
 			opp-microvolt = <950000 950000 1125000>;
 		};
 
-		opp@816000000,1000 {
+		opp-816000000-1000 {
 			opp-microvolt = <1000000 1000000 1125000>;
 		};
 
-		opp@912000000,850 {
+		opp-912000000-850 {
 			opp-microvolt = <850000 850000 1125000>;
 		};
 
-		opp@912000000,900 {
+		opp-912000000-900 {
 			opp-microvolt = <900000 900000 1125000>;
 		};
 
-		opp@912000000,925 {
+		opp-912000000-925 {
 			opp-microvolt = <925000 925000 1125000>;
 		};
 
-		opp@912000000,950 {
+		opp-912000000-950 {
 			opp-microvolt = <950000 950000 1125000>;
 		};
 
-		opp@912000000,1000 {
+		opp-912000000-1000 {
 			opp-microvolt = <1000000 1000000 1125000>;
 		};
 
-		opp@912000000,1050 {
+		opp-912000000-1050 {
 			opp-microvolt = <1050000 1050000 1125000>;
 		};
 
-		opp@1000000000,875 {
+		opp-1000000000-875 {
 			opp-microvolt = <875000 875000 1125000>;
 		};
 
-		opp@1000000000,900 {
+		opp-1000000000-900 {
 			opp-microvolt = <900000 900000 1125000>;
 		};
 
-		opp@1000000000,950 {
+		opp-1000000000-950 {
 			opp-microvolt = <950000 950000 1125000>;
 		};
 
-		opp@1000000000,975 {
+		opp-1000000000-975 {
 			opp-microvolt = <975000 975000 1125000>;
 		};
 
-		opp@1000000000,1000 {
+		opp-1000000000-1000 {
 			opp-microvolt = <1000000 1000000 1125000>;
 		};
 
-		opp@1000000000,1025 {
+		opp-1000000000-1025 {
 			opp-microvolt = <1025000 1025000 1125000>;
 		};
 
-		opp@1000000000,1100 {
+		opp-1000000000-1100 {
 			opp-microvolt = <1100000 1100000 1125000>;
 		};
 
-		opp@1200000000,1000 {
+		opp-1200000000-1000 {
 			opp-microvolt = <1000000 1000000 1125000>;
 		};
 
-		opp@1200000000,1050 {
+		opp-1200000000-1050 {
 			opp-microvolt = <1050000 1050000 1125000>;
 		};
 
-		opp@1200000000,1100 {
+		opp-1200000000-1100 {
 			opp-microvolt = <1100000 1100000 1125000>;
 		};
 
-		opp@1200000000,1125 {
+		opp-1200000000-1125 {
 			opp-microvolt = <1125000 1125000 1125000>;
 		};
 	};
diff --git a/dts/src/arm/tegra20-cpu-opp.dtsi b/dts/src/arm/tegra20-cpu-opp.dtsi
index 135de31638..47c8e78ca9 100644
--- a/dts/src/arm/tegra20-cpu-opp.dtsi
+++ b/dts/src/arm/tegra20-cpu-opp.dtsi
@@ -1,250 +1,250 @@
 // SPDX-License-Identifier: GPL-2.0
 
 / {
-	cpu0_opp_table: cpu_opp_table0 {
+	cpu0_opp_table: opp-table-cpu0 {
 		compatible = "operating-points-v2";
 		opp-shared;
 
-		opp@216000000,750 {
+		opp-216000000-750 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x0F 0x0003>;
 			opp-hz = /bits/ 64 <216000000>;
 			opp-suspend;
 		};
 
-		opp@216000000,800 {
+		opp-216000000-800 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x0F 0x0004>;
 			opp-hz = /bits/ 64 <216000000>;
 			opp-suspend;
 		};
 
-		opp@312000000,750 {
+		opp-312000000-750 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x0F 0x0003>;
 			opp-hz = /bits/ 64 <312000000>;
 		};
 
-		opp@312000000,800 {
+		opp-312000000-800 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x0F 0x0004>;
 			opp-hz = /bits/ 64 <312000000>;
 		};
 
-		opp@456000000,750 {
+		opp-456000000-750 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x0C 0x0003>;
 			opp-hz = /bits/ 64 <456000000>;
 		};
 
-		opp@456000000,800 {
+		opp-456000000-800 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x03 0x0006>, <0x04 0x0004>,
 					   <0x08 0x0004>;
 			opp-hz = /bits/ 64 <456000000>;
 		};
 
-		opp@456000000,825 {
+		opp-456000000-825 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x03 0x0001>;
 			opp-hz = /bits/ 64 <456000000>;
 		};
 
-		opp@608000000,750 {
+		opp-608000000-750 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x08 0x0003>;
 			opp-hz = /bits/ 64 <608000000>;
 		};
 
-		opp@608000000,800 {
+		opp-608000000-800 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x04 0x0006>, <0x08 0x0004>;
 			opp-hz = /bits/ 64 <608000000>;
 		};
 
-		opp@608000000,825 {
+		opp-608000000-825 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x04 0x0001>;
 			opp-hz = /bits/ 64 <608000000>;
 		};
 
-		opp@608000000,850 {
+		opp-608000000-850 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x03 0x0006>;
 			opp-hz = /bits/ 64 <608000000>;
 		};
 
-		opp@608000000,900 {
+		opp-608000000-900 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x03 0x0001>;
 			opp-hz = /bits/ 64 <608000000>;
 		};
 
-		opp@760000000,775 {
+		opp-760000000-775 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x08 0x0003>;
 			opp-hz = /bits/ 64 <760000000>;
 		};
 
-		opp@760000000,800 {
+		opp-760000000-800 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x08 0x0004>;
 			opp-hz = /bits/ 64 <760000000>;
 		};
 
-		opp@760000000,850 {
+		opp-760000000-850 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x04 0x0006>;
 			opp-hz = /bits/ 64 <760000000>;
 		};
 
-		opp@760000000,875 {
+		opp-760000000-875 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x04 0x0001>, <0x02 0x0002>,
 					   <0x01 0x0004>, <0x02 0x0004>;
 			opp-hz = /bits/ 64 <760000000>;
 		};
 
-		opp@760000000,900 {
+		opp-760000000-900 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x01 0x0002>;
 			opp-hz = /bits/ 64 <760000000>;
 		};
 
-		opp@760000000,975 {
+		opp-760000000-975 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x03 0x0001>;
 			opp-hz = /bits/ 64 <760000000>;
 		};
 
-		opp@816000000,800 {
+		opp-816000000-800 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x08 0x0007>;
 			opp-hz = /bits/ 64 <816000000>;
 		};
 
-		opp@816000000,850 {
+		opp-816000000-850 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x04 0x0002>;
 			opp-hz = /bits/ 64 <816000000>;
 		};
 
-		opp@816000000,875 {
+		opp-816000000-875 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x04 0x0005>;
 			opp-hz = /bits/ 64 <816000000>;
 		};
 
-		opp@816000000,950 {
+		opp-816000000-950 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x03 0x0006>;
 			opp-hz = /bits/ 64 <816000000>;
 		};
 
-		opp@816000000,1000 {
+		opp-816000000-1000 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x03 0x0001>;
 			opp-hz = /bits/ 64 <816000000>;
 		};
 
-		opp@912000000,850 {
+		opp-912000000-850 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x08 0x0007>;
 			opp-hz = /bits/ 64 <912000000>;
 		};
 
-		opp@912000000,900 {
+		opp-912000000-900 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x04 0x0002>;
 			opp-hz = /bits/ 64 <912000000>;
 		};
 
-		opp@912000000,925 {
+		opp-912000000-925 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x04 0x0001>;
 			opp-hz = /bits/ 64 <912000000>;
 		};
 
-		opp@912000000,950 {
+		opp-912000000-950 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x02 0x0006>, <0x01 0x0004>,
 					   <0x04 0x0004>;
 			opp-hz = /bits/ 64 <912000000>;
 		};
 
-		opp@912000000,1000 {
+		opp-912000000-1000 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x01 0x0002>;
 			opp-hz = /bits/ 64 <912000000>;
 		};
 
-		opp@912000000,1050 {
+		opp-912000000-1050 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x03 0x0001>;
 			opp-hz = /bits/ 64 <912000000>;
 		};
 
-		opp@1000000000,875 {
+		opp-1000000000-875 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x08 0x0007>;
 			opp-hz = /bits/ 64 <1000000000>;
 		};
 
-		opp@1000000000,900 {
+		opp-1000000000-900 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x04 0x0002>;
 			opp-hz = /bits/ 64 <1000000000>;
 		};
 
-		opp@1000000000,950 {
+		opp-1000000000-950 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x04 0x0004>;
 			opp-hz = /bits/ 64 <1000000000>;
 		};
 
-		opp@1000000000,975 {
+		opp-1000000000-975 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x04 0x0001>;
 			opp-hz = /bits/ 64 <1000000000>;
 		};
 
-		opp@1000000000,1000 {
+		opp-1000000000-1000 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x02 0x0006>, <0x01 0x0004>;
 			opp-hz = /bits/ 64 <1000000000>;
 		};
 
-		opp@1000000000,1025 {
+		opp-1000000000-1025 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x01 0x0002>;
 			opp-hz = /bits/ 64 <1000000000>;
 		};
 
-		opp@1000000000,1100 {
+		opp-1000000000-1100 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x03 0x0001>;
 			opp-hz = /bits/ 64 <1000000000>;
 		};
 
-		opp@1200000000,1000 {
+		opp-1200000000-1000 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x08 0x0004>;
 			opp-hz = /bits/ 64 <1200000000>;
 		};
 
-		opp@1200000000,1050 {
+		opp-1200000000-1050 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x04 0x0004>;
 			opp-hz = /bits/ 64 <1200000000>;
 		};
 
-		opp@1200000000,1100 {
+		opp-1200000000-1100 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x02 0x0004>;
 			opp-hz = /bits/ 64 <1200000000>;
 		};
 
-		opp@1200000000,1125 {
+		opp-1200000000-1125 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x01 0x0004>;
 			opp-hz = /bits/ 64 <1200000000>;
diff --git a/dts/src/arm/tegra20-harmony.dts b/dts/src/arm/tegra20-harmony.dts
index ae4312eedc..79b6b79fab 100644
--- a/dts/src/arm/tegra20-harmony.dts
+++ b/dts/src/arm/tegra20-harmony.dts
@@ -339,7 +339,7 @@
 					regulator-always-on;
 				};
 
-				sm0 {
+				vdd_core: sm0 {
 					regulator-name = "vdd_sm0,vdd_core";
 					regulator-min-microvolt = <1200000>;
 					regulator-max-microvolt = <1200000>;
@@ -565,6 +565,7 @@
 		nvidia,core-pwr-good-time = <3845 3845>;
 		nvidia,core-pwr-off-time = <3875>;
 		nvidia,sys-clock-req-active-high;
+		core-supply = <&vdd_core>;
 	};
 
 	pcie@80003000 {
@@ -595,8 +596,6 @@
 
 	usb@c5004000 {
 		status = "okay";
-		nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1)
-			GPIO_ACTIVE_LOW>;
 	};
 
 	usb-phy@c5004000 {
@@ -640,7 +639,7 @@
 		default-brightness-level = <6>;
 	};
 
-	clk32k_in: clock@0 {
+	clk32k_in: clock-32k {
 		compatible = "fixed-clock";
 		clock-frequency = <32768>;
 		#clock-cells = <0>;
@@ -666,7 +665,7 @@
 		backlight = <&backlight>;
 	};
 
-	vdd_5v0_reg: regulator@0 {
+	vdd_5v0_reg: regulator-5v0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_5v0";
 		regulator-min-microvolt = <5000000>;
@@ -674,7 +673,7 @@
 		regulator-always-on;
 	};
 
-	regulator@1 {
+	regulator-1v5 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_1v5";
 		regulator-min-microvolt = <1500000>;
@@ -682,7 +681,7 @@
 		gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
 	};
 
-	regulator@2 {
+	regulator-1v2 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_1v2";
 		regulator-min-microvolt = <1200000>;
@@ -691,7 +690,7 @@
 		enable-active-high;
 	};
 
-	pci_vdd_reg: regulator@3 {
+	pci_vdd_reg: regulator-1v05 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_1v05";
 		regulator-min-microvolt = <1050000>;
@@ -700,7 +699,7 @@
 		enable-active-high;
 	};
 
-	vdd_pnl_reg: regulator@4 {
+	vdd_pnl_reg: regulator-pn1 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_pnl";
 		regulator-min-microvolt = <2800000>;
@@ -709,7 +708,7 @@
 		enable-active-high;
 	};
 
-	vdd_bl_reg: regulator@5 {
+	vdd_bl_reg: regulator-bl {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_bl";
 		regulator-min-microvolt = <2800000>;
@@ -718,7 +717,7 @@
 		enable-active-high;
 	};
 
-	vdd_5v0_hdmi: regulator@6 {
+	vdd_5v0_hdmi: regulator-hdmi {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_HDMI";
 		regulator-min-microvolt = <5000000>;
diff --git a/dts/src/arm/tegra20-medcom-wide.dts b/dts/src/arm/tegra20-medcom-wide.dts
index b31c9bca16..f144487c5d 100644
--- a/dts/src/arm/tegra20-medcom-wide.dts
+++ b/dts/src/arm/tegra20-medcom-wide.dts
@@ -54,6 +54,9 @@
 
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <6>;
+
+		/* close enough */
+		power-supply = <&vdd_3v3_reg>;
 	};
 
 	panel: panel {
@@ -92,7 +95,7 @@
 		clock-names = "pll_a", "pll_a_out0", "mclk";
 	};
 
-	vcc_24v_reg: regulator@100 {
+	vcc_24v_reg: regulator-24v0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc_24v";
 		regulator-min-microvolt = <24000000>;
@@ -100,7 +103,7 @@
 		regulator-always-on;
 	};
 
-	vdd_5v0_reg: regulator@101 {
+	vdd_5v0_reg: regulator-5v0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_5v0";
 		vin-supply = <&vcc_24v_reg>;
@@ -109,7 +112,7 @@
 		regulator-always-on;
 	};
 
-	vdd_3v3_reg: regulator@102 {
+	vdd_3v3_reg: regulator-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_3v3";
 		vin-supply = <&vcc_24v_reg>;
@@ -118,7 +121,7 @@
 		regulator-always-on;
 	};
 
-	vdd_1v8_reg: regulator@103 {
+	vdd_1v8_reg: regulator-1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_1v8";
 		vin-supply = <&vdd_3v3_reg>;
diff --git a/dts/src/arm/tegra20-paz00.dts b/dts/src/arm/tegra20-paz00.dts
index 5b38b0606f..d53a175dc1 100644
--- a/dts/src/arm/tegra20-paz00.dts
+++ b/dts/src/arm/tegra20-paz00.dts
@@ -264,8 +264,16 @@
 		};
 	};
 
+	spdif@70002400 {
+		status = "okay";
+
+		nvidia,fixed-parent-rate;
+	};
+
 	i2s@70002800 {
 		status = "okay";
+
+		nvidia,fixed-parent-rate;
 	};
 
 	serial@70006000 {
@@ -519,6 +527,7 @@
 		nvidia,core-pwr-good-time = <3845 3845>;
 		nvidia,core-pwr-off-time = <0>;
 		nvidia,sys-clock-req-active-high;
+		core-supply = <&core_vdd_reg>;
 	};
 
 	usb@c5000000 {
@@ -533,8 +542,6 @@
 
 	usb@c5004000 {
 		status = "okay";
-		nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 0)
-			GPIO_ACTIVE_LOW>;
 	};
 
 	usb-phy@c5004000 {
@@ -573,9 +580,12 @@
 
 		brightness-levels = <0 16 32 48 64 80 96 112 128 144 160 176 192 208 224 240 255>;
 		default-brightness-level = <10>;
+
+		/* close enough */
+		power-supply = <&vdd_pnl_reg>;
 	};
 
-	clk32k_in: clock@0 {
+	clk32k_in: clock-32k {
 		compatible = "fixed-clock";
 		clock-frequency = <32768>;
 		#clock-cells = <0>;
@@ -612,7 +622,7 @@
 		backlight = <&backlight>;
 	};
 
-	p5valw_reg: regulator@0 {
+	p5valw_reg: regulator-5v0alw {
 		compatible = "regulator-fixed";
 		regulator-name = "+5valw";
 		regulator-min-microvolt = <5000000>;
@@ -620,7 +630,7 @@
 		regulator-always-on;
 	};
 
-	vdd_pnl_reg: regulator@1 {
+	vdd_pnl_reg: regulator-3v0 {
 		compatible = "regulator-fixed";
 		regulator-name = "+3VS,vdd_pnl";
 		regulator-min-microvolt = <3300000>;
@@ -705,5 +715,5 @@
 };
 
 &emc_icc_dvfs_opp_table {
-	/delete-node/ opp@760000000;
+	/delete-node/ opp-760000000;
 };
diff --git a/dts/src/arm/tegra20-peripherals-opp.dtsi b/dts/src/arm/tegra20-peripherals-opp.dtsi
index ef3ad2e5f2..1b808233a9 100644
--- a/dts/src/arm/tegra20-peripherals-opp.dtsi
+++ b/dts/src/arm/tegra20-peripherals-opp.dtsi
@@ -1,110 +1,1022 @@
 // SPDX-License-Identifier: GPL-2.0
 
 / {
-	emc_icc_dvfs_opp_table: emc-dvfs-opp-table {
+	core_opp_table: opp-table-core {
 		compatible = "operating-points-v2";
+		opp-shared;
 
-		opp@36000000 {
+		core_opp_950: opp-950000 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-level = <950000>;
+		};
+
+		core_opp_1000: opp-1000000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-level = <1000000>;
+		};
+
+		core_opp_1100: opp-1100000 {
+			opp-microvolt = <1100000 1100000 1300000>;
+			opp-level = <1100000>;
+		};
+
+		core_opp_1200: opp-1200000 {
+			opp-microvolt = <1200000 1200000 1300000>;
+			opp-level = <1200000>;
+		};
+
+		core_opp_1225: opp-1225000 {
+			opp-microvolt = <1225000 1225000 1300000>;
+			opp-level = <1225000>;
+		};
+
+		core_opp_1275: opp-1275000 {
+			opp-microvolt = <1275000 1275000 1300000>;
+			opp-level = <1275000>;
+		};
+
+		core_opp_1300: opp-1300000 {
+			opp-microvolt = <1300000 1300000 1300000>;
+			opp-level = <1300000>;
+		};
+	};
+
+	emc_icc_dvfs_opp_table: opp-table-emc {
+		compatible = "operating-points-v2";
+
+		opp-36000000 {
 			opp-microvolt = <950000 950000 1300000>;
 			opp-hz = /bits/ 64 <36000000>;
 			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_950>;
 		};
 
-		opp@47500000 {
+		opp-47500000 {
 			opp-microvolt = <950000 950000 1300000>;
 			opp-hz = /bits/ 64 <47500000>;
 			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_950>;
 		};
 
-		opp@50000000 {
+		opp-50000000 {
 			opp-microvolt = <950000 950000 1300000>;
 			opp-hz = /bits/ 64 <50000000>;
 			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_950>;
 		};
 
-		opp@54000000 {
+		opp-54000000 {
 			opp-microvolt = <950000 950000 1300000>;
 			opp-hz = /bits/ 64 <54000000>;
 			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_950>;
 		};
 
-		opp@57000000 {
+		opp-57000000 {
 			opp-microvolt = <950000 950000 1300000>;
 			opp-hz = /bits/ 64 <57000000>;
 			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_950>;
 		};
 
-		opp@100000000 {
+		opp-100000000 {
 			opp-microvolt = <1000000 1000000 1300000>;
 			opp-hz = /bits/ 64 <100000000>;
 			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
 		};
 
-		opp@108000000 {
+		opp-108000000 {
 			opp-microvolt = <1000000 1000000 1300000>;
 			opp-hz = /bits/ 64 <108000000>;
 			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
 		};
 
-		opp@126666000 {
+		opp-126666000 {
 			opp-microvolt = <1000000 1000000 1300000>;
 			opp-hz = /bits/ 64 <126666000>;
 			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
 		};
 
-		opp@150000000 {
+		opp-150000000 {
 			opp-microvolt = <1000000 1000000 1300000>;
 			opp-hz = /bits/ 64 <150000000>;
 			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
 		};
 
-		opp@190000000 {
+		opp-190000000 {
 			opp-microvolt = <1000000 1000000 1300000>;
 			opp-hz = /bits/ 64 <190000000>;
 			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
 		};
 
-		opp@216000000 {
+		opp-216000000 {
 			opp-microvolt = <1000000 1000000 1300000>;
 			opp-hz = /bits/ 64 <216000000>;
 			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
 			opp-suspend;
 		};
 
-		opp@300000000 {
+		opp-300000000 {
 			opp-microvolt = <1000000 1000000 1300000>;
 			opp-hz = /bits/ 64 <300000000>;
 			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
 		};
 
-		opp@333000000 {
+		opp-333000000 {
 			opp-microvolt = <1000000 1000000 1300000>;
 			opp-hz = /bits/ 64 <333000000>;
 			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
 		};
 
-		opp@380000000 {
+		opp-380000000 {
 			opp-microvolt = <1100000 1100000 1300000>;
 			opp-hz = /bits/ 64 <380000000>;
 			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1100>;
 		};
 
-		opp@600000000 {
+		opp-600000000 {
 			opp-microvolt = <1200000 1200000 1300000>;
 			opp-hz = /bits/ 64 <600000000>;
 			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1200>;
 		};
 
-		opp@666000000 {
+		opp-666000000 {
 			opp-microvolt = <1200000 1200000 1300000>;
 			opp-hz = /bits/ 64 <666000000>;
 			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1200>;
 		};
 
-		opp@760000000 {
+		opp-760000000 {
 			opp-microvolt = <1300000 1300000 1300000>;
 			opp-hz = /bits/ 64 <760000000>;
 			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1300>;
+		};
+	};
+
+	host1x_dvfs_opp_table: opp-table-host1x {
+		compatible = "operating-points-v2";
+
+		opp-104500000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <104500000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-133000000-1000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <133000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-166000000-1100 {
+			opp-microvolt = <1100000 1100000 1300000>;
+			opp-hz = /bits/ 64 <166000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1100>;
+		};
+	};
+
+	mpe_dvfs_opp_table: opp-table-mpe {
+		compatible = "operating-points-v2";
+
+		opp-104500000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <104500000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-142500000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <142500000>;
+			opp-supported-hw = <0x0002>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-152000000-1000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <152000000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-190000000-1000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <190000000>;
+			opp-supported-hw = <0x0002>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-190000000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <190000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-228000000-1100 {
+			opp-microvolt = <1100000 1100000 1300000>;
+			opp-hz = /bits/ 64 <228000000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-228000000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <228000000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-237500000-1000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <237500000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-266000000-1000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <266000000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-275500000-1100 {
+			opp-microvolt = <1100000 1100000 1300000>;
+			opp-hz = /bits/ 64 <275500000>;
+			opp-supported-hw = <0x0002>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-300000000-1200 {
+			opp-microvolt = <1200000 1200000 1300000>;
+			opp-hz = /bits/ 64 <300000000>;
+			opp-supported-hw = <0x0003>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-300000000-1100 {
+			opp-microvolt = <1100000 1100000 1300000>;
+			opp-hz = /bits/ 64 <300000000>;
+			opp-supported-hw = <0x000C>;
+			required-opps = <&core_opp_1100>;
+		};
+	};
+
+	vi_dvfs_opp_table: opp-table-vi {
+		compatible = "operating-points-v2";
+
+		opp-85000000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <85000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-100000000-1000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <100000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-150000000-1100 {
+			opp-microvolt = <1100000 1100000 1300000>;
+			opp-hz = /bits/ 64 <150000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1100>;
+		};
+	};
+
+	epp_dvfs_opp_table: opp-table-epp {
+		compatible = "operating-points-v2";
+
+		opp-133000000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <133000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-171000000-1000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <171000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-247000000-1100 {
+			opp-microvolt = <1100000 1100000 1300000>;
+			opp-hz = /bits/ 64 <247000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-300000000-1200 {
+			opp-microvolt = <1200000 1200000 1300000>;
+			opp-hz = /bits/ 64 <300000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1200>;
+		};
+	};
+
+	gr2d_dvfs_opp_table: opp-table-gr2d {
+		compatible = "operating-points-v2";
+
+		opp-133000000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <133000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-171000000-1000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <171000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-247000000-1100 {
+			opp-microvolt = <1100000 1100000 1300000>;
+			opp-hz = /bits/ 64 <247000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-300000000-1200 {
+			opp-microvolt = <1200000 1200000 1300000>;
+			opp-hz = /bits/ 64 <300000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1200>;
+		};
+	};
+
+	gr3d_dvfs_opp_table: opp-table-gr3d {
+		compatible = "operating-points-v2";
+
+		opp-114000000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <114000000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-161500000-1000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <161500000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-161500000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <161500000>;
+			opp-supported-hw = <0x0002>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-209000000-1000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <209000000>;
+			opp-supported-hw = <0x0002>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-218500000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <218500000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-247000000-1100 {
+			opp-microvolt = <1100000 1100000 1300000>;
+			opp-hz = /bits/ 64 <247000000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-247000000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <247000000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-256500000-1000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <256500000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-285000000-1100 {
+			opp-microvolt = <1100000 1100000 1300000>;
+			opp-hz = /bits/ 64 <285000000>;
+			opp-supported-hw = <0x0002>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-285000000-1000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <285000000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-304000000-1200 {
+			opp-microvolt = <1200000 1200000 1300000>;
+			opp-hz = /bits/ 64 <304000000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-323000000-1100 {
+			opp-microvolt = <1100000 1100000 1300000>;
+			opp-hz = /bits/ 64 <323000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-333500000-1275 {
+			opp-microvolt = <1275000 1275000 1300000>;
+			opp-hz = /bits/ 64 <333500000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1275>;
+		};
+
+		opp-333500000-1200 {
+			opp-microvolt = <1200000 1200000 1300000>;
+			opp-hz = /bits/ 64 <333500000>;
+			opp-supported-hw = <0x0002>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-351500000-1100 {
+			opp-microvolt = <1100000 1100000 1300000>;
+			opp-hz = /bits/ 64 <351500000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-361000000-1275 {
+			opp-microvolt = <1275000 1275000 1300000>;
+			opp-hz = /bits/ 64 <361000000>;
+			opp-supported-hw = <0x0002>;
+			required-opps = <&core_opp_1275>;
+		};
+
+		opp-380000000-1200 {
+			opp-microvolt = <1200000 1200000 1300000>;
+			opp-hz = /bits/ 64 <380000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-400000000-1275 {
+			opp-microvolt = <1275000 1275000 1300000>;
+			opp-hz = /bits/ 64 <400000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1275>;
+		};
+
+		opp-400000000-1200 {
+			opp-microvolt = <1200000 1200000 1300000>;
+			opp-hz = /bits/ 64 <400000000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1200>;
+		};
+	};
+
+	disp1_dvfs_opp_table: opp-table-disp1 {
+		compatible = "operating-points-v2";
+
+		opp-158000000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <158000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-190000000-1100 {
+			opp-microvolt = <1100000 1100000 1300000>;
+			opp-hz = /bits/ 64 <190000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1100>;
+		};
+	};
+
+	disp2_dvfs_opp_table: opp-table-disp2 {
+		compatible = "operating-points-v2";
+
+		opp-158000000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <158000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-190000000-1100 {
+			opp-microvolt = <1100000 1100000 1300000>;
+			opp-hz = /bits/ 64 <190000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1100>;
+		};
+	};
+
+	dsi_dvfs_opp_table: opp-table-dsi {
+		compatible = "operating-points-v2";
+
+		opp-100000000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <100000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-500000000-1200 {
+			opp-microvolt = <1200000 1200000 1300000>;
+			opp-hz = /bits/ 64 <500000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1200>;
+		};
+	};
+
+	hdmi_dvfs_opp_table: opp-table-hdmi {
+		compatible = "operating-points-v2";
+
+		opp-148500000-1200 {
+			opp-microvolt = <1200000 1200000 1300000>;
+			opp-hz = /bits/ 64 <148500000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1200>;
+		};
+	};
+
+	tvo_dvfs_opp_table: opp-table-tvo {
+		compatible = "operating-points-v2";
+
+		opp-250000000-1200 {
+			opp-microvolt = <1200000 1200000 1300000>;
+			opp-hz = /bits/ 64 <250000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1200>;
+		};
+	};
+
+	sclk_dvfs_opp_table: opp-table-sclk {
+		compatible = "operating-points-v2";
+
+		opp-95000000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <95000000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-123500000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <123500000>;
+			opp-supported-hw = <0x0002>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-133000000-1000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <133000000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-152000000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <152000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-159500000-1000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <159500000>;
+			opp-supported-hw = <0x0002>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-171000000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <171000000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-180500000-1000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <180500000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-190000000-1100 {
+			opp-microvolt = <1100000 1100000 1300000>;
+			opp-hz = /bits/ 64 <190000000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-207000000-1100 {
+			opp-microvolt = <1100000 1100000 1300000>;
+			opp-hz = /bits/ 64 <207000000>;
+			opp-supported-hw = <0x0002>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-218500000-1000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <218500000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-222500000-1200 {
+			opp-microvolt = <1200000 1200000 1300000>;
+			opp-hz = /bits/ 64 <222500000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-229500000-1100 {
+			opp-microvolt = <1100000 1100000 1300000>;
+			opp-hz = /bits/ 64 <229500000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-240000000-1225 {
+			opp-microvolt = <1225000 1225000 1300000>;
+			opp-hz = /bits/ 64 <240000000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1225>;
+		};
+
+		opp-240000000-1200 {
+			opp-microvolt = <1200000 1200000 1300000>;
+			opp-hz = /bits/ 64 <240000000>;
+			opp-supported-hw = <0x0002>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-247000000-1275 {
+			opp-microvolt = <1275000 1275000 1300000>;
+			opp-hz = /bits/ 64 <247000000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1275>;
+		};
+
+		opp-256500000-1100 {
+			opp-microvolt = <1100000 1100000 1300000>;
+			opp-hz = /bits/ 64 <256500000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-260000000-1200 {
+			opp-microvolt = <1200000 1200000 1300000>;
+			opp-hz = /bits/ 64 <260000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-262000000-1300 {
+			opp-microvolt = <1300000 1300000 1300000>;
+			opp-hz = /bits/ 64 <262000000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1300>;
+		};
+
+		opp-264000000-1275 {
+			opp-microvolt = <1275000 1275000 1300000>;
+			opp-hz = /bits/ 64 <264000000>;
+			opp-supported-hw = <0x0002>;
+			required-opps = <&core_opp_1275>;
+		};
+
+		opp-277500000-1300 {
+			opp-microvolt = <1300000 1300000 1300000>;
+			opp-hz = /bits/ 64 <277500000>;
+			opp-supported-hw = <0x0002>;
+			required-opps = <&core_opp_1300>;
+		};
+
+		opp-285000000-1275 {
+			opp-microvolt = <1275000 1275000 1300000>;
+			opp-hz = /bits/ 64 <285000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1275>;
+		};
+
+		opp-292500000-1200 {
+			opp-microvolt = <1200000 1200000 1300000>;
+			opp-hz = /bits/ 64 <292500000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-300000000-1300 {
+			opp-microvolt = <1300000 1300000 1300000>;
+			opp-hz = /bits/ 64 <300000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1300>;
+		};
+
+		opp-300000000-1275 {
+			opp-microvolt = <1275000 1275000 1300000>;
+			opp-hz = /bits/ 64 <300000000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1275>;
+		};
+	};
+
+	vde_dvfs_opp_table: opp-table-vde {
+		compatible = "operating-points-v2";
+
+		opp-95000000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <95000000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-123500000-1000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <123500000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-123500000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <123500000>;
+			opp-supported-hw = <0x0002>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-152000000-1000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <152000000>;
+			opp-supported-hw = <0x0002>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-152000000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <152000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-171000000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <171000000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-209000000-1100 {
+			opp-microvolt = <1100000 1100000 1300000>;
+			opp-hz = /bits/ 64 <209000000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-209000000-1000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <209000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-218500000-1000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <218500000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-237500000-1100 {
+			opp-microvolt = <1100000 1100000 1300000>;
+			opp-hz = /bits/ 64 <237500000>;
+			opp-supported-hw = <0x0002>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-275500000-1200 {
+			opp-microvolt = <1200000 1200000 1300000>;
+			opp-hz = /bits/ 64 <275500000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-285000000-1100 {
+			opp-microvolt = <1100000 1100000 1300000>;
+			opp-hz = /bits/ 64 <285000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-300000000-1275 {
+			opp-microvolt = <1275000 1275000 1300000>;
+			opp-hz = /bits/ 64 <300000000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1275>;
+		};
+
+		opp-300000000-1200 {
+			opp-microvolt = <1200000 1200000 1300000>;
+			opp-hz = /bits/ 64 <300000000>;
+			opp-supported-hw = <0x0006>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-300000000-1100 {
+			opp-microvolt = <1100000 1100000 1300000>;
+			opp-hz = /bits/ 64 <300000000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1100>;
+		};
+	};
+
+	ndflash_dvfs_opp_table: opp-table-ndflash {
+		compatible = "operating-points-v2";
+
+		opp-130000000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <130000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-150000000-1000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <150000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-158000000-1100 {
+			opp-microvolt = <1100000 1100000 1300000>;
+			opp-hz = /bits/ 64 <158000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-164000000-1200 {
+			opp-microvolt = <1200000 1200000 1300000>;
+			opp-hz = /bits/ 64 <164000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1200>;
+		};
+	};
+
+	nor_dvfs_opp_table: opp-table-nor {
+		compatible = "operating-points-v2";
+
+		opp-92000000-1000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <92000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+	};
+
+	sdmmc1_dvfs_opp_table: opp-table-sdmmc1 {
+		compatible = "operating-points-v2";
+
+		opp-44000000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <44000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-52000000-1000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <52000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+	};
+
+	sdmmc2_dvfs_opp_table: opp-table-sdmmc2 {
+		compatible = "operating-points-v2";
+
+		opp-44000000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <44000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-52000000-1000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <52000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+	};
+
+	sdmmc3_dvfs_opp_table: opp-table-sdmmc3 {
+		compatible = "operating-points-v2";
+
+		opp-44000000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <44000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-52000000-1000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <52000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+	};
+
+	sdmmc4_dvfs_opp_table: opp-table-sdmmc4 {
+		compatible = "operating-points-v2";
+
+		opp-44000000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <44000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-52000000-1000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <52000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+	};
+
+	pcie_dvfs_opp_table: opp-table-pcie {
+		compatible = "operating-points-v2";
+
+		opp-250000000-1200 {
+			opp-microvolt = <1200000 1200000 1300000>;
+			opp-hz = /bits/ 64 <250000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1200>;
+		};
+	};
+
+	usbd_dvfs_opp_table: opp-table-usbd {
+		compatible = "operating-points-v2";
+
+		opp-480000000-1100 {
+			opp-microvolt = <1100000 1100000 1300000>;
+			opp-hz = /bits/ 64 <480000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1100>;
+		};
+	};
+
+	usb2_dvfs_opp_table: opp-table-usb2 {
+		compatible = "operating-points-v2";
+
+		opp-480000000-1100 {
+			opp-microvolt = <1100000 1100000 1300000>;
+			opp-hz = /bits/ 64 <480000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1100>;
+		};
+	};
+
+	usb3_dvfs_opp_table: opp-table-usb3 {
+		compatible = "operating-points-v2";
+
+		opp-480000000-1100 {
+			opp-microvolt = <1100000 1100000 1300000>;
+			opp-hz = /bits/ 64 <480000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1100>;
 		};
 	};
 };
diff --git a/dts/src/arm/tegra20-plutux.dts b/dts/src/arm/tegra20-plutux.dts
index 5811b7006a..71a8236491 100644
--- a/dts/src/arm/tegra20-plutux.dts
+++ b/dts/src/arm/tegra20-plutux.dts
@@ -60,7 +60,7 @@
 		clock-names = "pll_a", "pll_a_out0", "mclk";
 	};
 
-	vcc_24v_reg: regulator@100 {
+	vcc_24v_reg: regulator-24v0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc_24v";
 		regulator-min-microvolt = <24000000>;
@@ -68,7 +68,7 @@
 		regulator-always-on;
 	};
 
-	vdd_5v0_reg: regulator@101 {
+	vdd_5v0_reg: regulator-5v0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_5v0";
 		vin-supply = <&vcc_24v_reg>;
@@ -77,7 +77,7 @@
 		regulator-always-on;
 	};
 
-	vdd_3v3_reg: regulator@102 {
+	vdd_3v3_reg: regulator-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_3v3";
 		vin-supply = <&vcc_24v_reg>;
@@ -86,7 +86,7 @@
 		regulator-always-on;
 	};
 
-	vdd_1v8_reg: regulator@103 {
+	vdd_1v8_reg: regulator-1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_1v8";
 		vin-supply = <&vdd_3v3_reg>;
diff --git a/dts/src/arm/tegra20-seaboard.dts b/dts/src/arm/tegra20-seaboard.dts
index 92d494b8c3..c4a6a6a945 100644
--- a/dts/src/arm/tegra20-seaboard.dts
+++ b/dts/src/arm/tegra20-seaboard.dts
@@ -358,7 +358,7 @@
 		};
 
 		gyrometer@68 {
-			compatible = "invn,mpu3050";
+			compatible = "invensense,mpu3050";
 			reg = <0x68>;
 			interrupt-parent = <&gpio>;
 			interrupts = <TEGRA_GPIO(Z, 4) IRQ_TYPE_LEVEL_HIGH>;
@@ -444,7 +444,7 @@
 					regulator-always-on;
 				};
 
-				sm0 {
+				vdd_core: sm0 {
 					regulator-name = "vdd_sm0,vdd_core";
 					regulator-min-microvolt = <1300000>;
 					regulator-max-microvolt = <1300000>;
@@ -689,6 +689,7 @@
 		nvidia,core-pwr-good-time = <3845 3845>;
 		nvidia,core-pwr-off-time = <3875>;
 		nvidia,sys-clock-req-active-high;
+		core-supply = <&vdd_core>;
 	};
 
 	memory-controller@7000f400 {
@@ -742,8 +743,6 @@
 
 	usb@c5004000 {
 		status = "okay";
-		nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1)
-			GPIO_ACTIVE_LOW>;
 	};
 
 	usb-phy@c5004000 {
@@ -792,7 +791,7 @@
 		default-brightness-level = <6>;
 	};
 
-	clk32k_in: clock@0 {
+	clk32k_in: clock-32k {
 		compatible = "fixed-clock";
 		clock-frequency = <32768>;
 		#clock-cells = <0>;
@@ -828,7 +827,7 @@
 		ddc-i2c-bus = <&lvds_ddc>;
 	};
 
-	vdd_5v0_reg: regulator@0 {
+	vdd_5v0_reg: regulator-5v0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_5v0";
 		regulator-min-microvolt = <5000000>;
@@ -836,7 +835,7 @@
 		regulator-always-on;
 	};
 
-	regulator@1 {
+	regulator-1v5 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_1v5";
 		regulator-min-microvolt = <1500000>;
@@ -844,7 +843,7 @@
 		gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
 	};
 
-	regulator@2 {
+	regulator-1v2 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_1v2";
 		regulator-min-microvolt = <1200000>;
@@ -853,7 +852,7 @@
 		enable-active-high;
 	};
 
-	vbus_reg: regulator@3 {
+	vbus_reg: regulator-vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_vbus_wup1";
 		regulator-min-microvolt = <5000000>;
@@ -864,7 +863,7 @@
 		regulator-boot-on;
 	};
 
-	vdd_pnl_reg: regulator@4 {
+	vdd_pnl_reg: regulator-pnl {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_pnl";
 		regulator-min-microvolt = <2800000>;
@@ -873,7 +872,7 @@
 		enable-active-high;
 	};
 
-	vdd_bl_reg: regulator@5 {
+	vdd_bl_reg: regulator-bl {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_bl";
 		regulator-min-microvolt = <2800000>;
@@ -882,7 +881,7 @@
 		enable-active-high;
 	};
 
-	vdd_hdmi: regulator@6 {
+	vdd_hdmi: regulator-hdmi {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_HDMI";
 		regulator-min-microvolt = <5000000>;
diff --git a/dts/src/arm/tegra20-tamonten.dtsi b/dts/src/arm/tegra20-tamonten.dtsi
index dd4d506683..de39c5465c 100644
--- a/dts/src/arm/tegra20-tamonten.dtsi
+++ b/dts/src/arm/tegra20-tamonten.dtsi
@@ -357,7 +357,7 @@
 					regulator-always-on;
 				};
 
-				sm0 {
+				vdd_core: sm0 {
 					regulator-name = "vdd_sys_sm0,vdd_core";
 					regulator-min-microvolt = <1200000>;
 					regulator-max-microvolt = <1200000>;
@@ -477,6 +477,7 @@
 		nvidia,core-pwr-good-time = <3845 3845>;
 		nvidia,core-pwr-off-time = <3875>;
 		nvidia,sys-clock-req-active-high;
+		core-supply = <&vdd_core>;
 	};
 
 	pcie@80003000 {
@@ -502,13 +503,13 @@
 		status = "okay";
 	};
 
-	clk32k_in: clock@0 {
+	clk32k_in: clock-32k {
 		compatible = "fixed-clock";
 		clock-frequency = <32768>;
 		#clock-cells = <0>;
 	};
 
-	pci_vdd_reg: regulator@1 {
+	pci_vdd_reg: regulator-1v05 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_1v05";
 		regulator-min-microvolt = <1050000>;
diff --git a/dts/src/arm/tegra20-tec.dts b/dts/src/arm/tegra20-tec.dts
index 10ff09d86e..4f41c74384 100644
--- a/dts/src/arm/tegra20-tec.dts
+++ b/dts/src/arm/tegra20-tec.dts
@@ -69,7 +69,7 @@
 		clock-names = "pll_a", "pll_a_out0", "mclk";
 	};
 
-	vcc_24v_reg: regulator@100 {
+	vcc_24v_reg: regulator-24v {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc_24v";
 		regulator-min-microvolt = <24000000>;
@@ -77,7 +77,7 @@
 		regulator-always-on;
 	};
 
-	vdd_5v0_reg: regulator@101 {
+	vdd_5v0_reg: regulator-5v0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_5v0";
 		vin-supply = <&vcc_24v_reg>;
@@ -86,7 +86,7 @@
 		regulator-always-on;
 	};
 
-	vdd_3v3_reg: regulator@102 {
+	vdd_3v3_reg: regulator-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_3v3";
 		vin-supply = <&vcc_24v_reg>;
@@ -95,7 +95,7 @@
 		regulator-always-on;
 	};
 
-	vdd_1v8_reg: regulator@103 {
+	vdd_1v8_reg: regulator-1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_1v8";
 		vin-supply = <&vdd_3v3_reg>;
diff --git a/dts/src/arm/tegra20-trimslice.dts b/dts/src/arm/tegra20-trimslice.dts
index 4bc87bc0c2..9d0c86711d 100644
--- a/dts/src/arm/tegra20-trimslice.dts
+++ b/dts/src/arm/tegra20-trimslice.dts
@@ -287,7 +287,8 @@
 	spi@7000c380 {
 		status = "okay";
 		spi-max-frequency = <48000000>;
-		spi-flash@0 {
+
+		flash@0 {
 			compatible = "winbond,w25q80bl", "jedec,spi-nor";
 			reg = <0>;
 			spi-max-frequency = <48000000>;
@@ -321,6 +322,7 @@
 		nvidia,core-pwr-good-time = <3845 3845>;
 		nvidia,core-pwr-off-time = <3875>;
 		nvidia,sys-clock-req-active-high;
+		core-supply = <&vdd_core>;
 	};
 
 	pcie@80003000 {
@@ -348,8 +350,6 @@
 
 	usb@c5004000 {
 		status = "okay";
-		nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 0)
-			GPIO_ACTIVE_LOW>;
 	};
 
 	usb-phy@c5004000 {
@@ -379,7 +379,7 @@
 		bus-width = <4>;
 	};
 
-	clk32k_in: clock@0 {
+	clk32k_in: clock-32k {
 		compatible = "fixed-clock";
 		clock-frequency = <32768>;
 		#clock-cells = <0>;
@@ -401,7 +401,7 @@
 		gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_LOW>;
 	};
 
-	hdmi_vdd_reg: regulator@0 {
+	hdmi_vdd_reg: regulator-hdmi {
 		compatible = "regulator-fixed";
 		regulator-name = "avdd_hdmi";
 		regulator-min-microvolt = <3300000>;
@@ -409,7 +409,7 @@
 		regulator-always-on;
 	};
 
-	hdmi_pll_reg: regulator@1 {
+	hdmi_pll_reg: regulator-hdmipll {
 		compatible = "regulator-fixed";
 		regulator-name = "avdd_hdmi_pll";
 		regulator-min-microvolt = <1800000>;
@@ -417,7 +417,7 @@
 		regulator-always-on;
 	};
 
-	vbus_reg: regulator@2 {
+	vbus_reg: regulator-vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "usb1_vbus";
 		regulator-min-microvolt = <5000000>;
@@ -428,7 +428,7 @@
 		regulator-boot-on;
 	};
 
-	pci_clk_reg: regulator@3 {
+	pci_clk_reg: regulator-pciclk {
 		compatible = "regulator-fixed";
 		regulator-name = "pci_clk";
 		regulator-min-microvolt = <3300000>;
@@ -436,7 +436,7 @@
 		regulator-always-on;
 	};
 
-	pci_vdd_reg: regulator@4 {
+	pci_vdd_reg: regulator-pcivdd {
 		compatible = "regulator-fixed";
 		regulator-name = "pci_vdd";
 		regulator-min-microvolt = <1050000>;
@@ -444,6 +444,14 @@
 		regulator-always-on;
 	};
 
+	vdd_core: regulator-core {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_core";
+		regulator-min-microvolt = <1300000>;
+		regulator-max-microvolt = <1300000>;
+		regulator-always-on;
+	};
+
 	sound {
 		compatible = "nvidia,tegra-audio-trimslice";
 		nvidia,i2s-controller = <&tegra_i2s1>;
diff --git a/dts/src/arm/tegra20-ventana.dts b/dts/src/arm/tegra20-ventana.dts
index 5a2578b370..b0a00970b6 100644
--- a/dts/src/arm/tegra20-ventana.dts
+++ b/dts/src/arm/tegra20-ventana.dts
@@ -544,6 +544,7 @@
 		nvidia,core-pwr-good-time = <3845 3845>;
 		nvidia,core-pwr-off-time = <458>;
 		nvidia,sys-clock-req-active-high;
+		core-supply = <&vdd_core>;
 	};
 
 	usb@c5000000 {
@@ -556,8 +557,6 @@
 
 	usb@c5004000 {
 		status = "okay";
-		nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1)
-			GPIO_ACTIVE_LOW>;
 	};
 
 	usb-phy@c5004000 {
@@ -606,7 +605,7 @@
 		default-brightness-level = <6>;
 	};
 
-	clk32k_in: clock@0 {
+	clk32k_in: clock-32k {
 		compatible = "fixed-clock";
 		clock-frequency = <32768>;
 		#clock-cells = <0>;
@@ -647,7 +646,7 @@
 		ddc-i2c-bus = <&lvds_ddc>;
 	};
 
-	vdd_5v0_reg: regulator@0 {
+	vdd_5v0_reg: regulator-5v0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_5v0";
 		regulator-min-microvolt = <5000000>;
@@ -655,7 +654,7 @@
 		regulator-always-on;
 	};
 
-	regulator@1 {
+	regulator-1v5 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_1v5";
 		regulator-min-microvolt = <1500000>;
@@ -663,7 +662,7 @@
 		gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
 	};
 
-	regulator@2 {
+	regulator-1v2 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_1v2";
 		regulator-min-microvolt = <1200000>;
@@ -672,7 +671,7 @@
 		enable-active-high;
 	};
 
-	vdd_pnl_reg: regulator@3 {
+	vdd_pnl_reg: regulator-pnl {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_pnl";
 		regulator-min-microvolt = <2800000>;
@@ -681,7 +680,7 @@
 		enable-active-high;
 	};
 
-	vdd_bl_reg: regulator@4 {
+	vdd_bl_reg: regulator-bl {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_bl";
 		regulator-min-microvolt = <2800000>;
diff --git a/dts/src/arm/tegra20.dtsi b/dts/src/arm/tegra20.dtsi
index 9508248fd1..62bf0b3064 100644
--- a/dts/src/arm/tegra20.dtsi
+++ b/dts/src/arm/tegra20.dtsi
@@ -40,8 +40,10 @@
 		interrupt-names = "syncpt", "host1x";
 		clocks = <&tegra_car TEGRA20_CLK_HOST1X>;
 		clock-names = "host1x";
-		resets = <&tegra_car 28>;
-		reset-names = "host1x";
+		resets = <&tegra_car 28>, <&mc TEGRA20_MC_RESET_HC>;
+		reset-names = "host1x", "mc";
+		power-domains = <&pd_core>;
+		operating-points-v2 = <&host1x_dvfs_opp_table>;
 
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -55,6 +57,9 @@
 			clocks = <&tegra_car TEGRA20_CLK_MPE>;
 			resets = <&tegra_car 60>;
 			reset-names = "mpe";
+			power-domains = <&pd_mpe>;
+			operating-points-v2 = <&mpe_dvfs_opp_table>;
+			status = "disabled";
 		};
 
 		vi@54080000 {
@@ -64,6 +69,9 @@
 			clocks = <&tegra_car TEGRA20_CLK_VI>;
 			resets = <&tegra_car 20>;
 			reset-names = "vi";
+			power-domains = <&pd_venc>;
+			operating-points-v2 = <&vi_dvfs_opp_table>;
+			status = "disabled";
 		};
 
 		epp@540c0000 {
@@ -73,6 +81,9 @@
 			clocks = <&tegra_car TEGRA20_CLK_EPP>;
 			resets = <&tegra_car 19>;
 			reset-names = "epp";
+			power-domains = <&pd_core>;
+			operating-points-v2 = <&epp_dvfs_opp_table>;
+			status = "disabled";
 		};
 
 		isp@54100000 {
@@ -82,6 +93,8 @@
 			clocks = <&tegra_car TEGRA20_CLK_ISP>;
 			resets = <&tegra_car 23>;
 			reset-names = "isp";
+			power-domains = <&pd_venc>;
+			status = "disabled";
 		};
 
 		gr2d@54140000 {
@@ -89,16 +102,20 @@
 			reg = <0x54140000 0x00040000>;
 			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&tegra_car TEGRA20_CLK_GR2D>;
-			resets = <&tegra_car 21>;
-			reset-names = "2d";
+			resets = <&tegra_car 21>, <&mc TEGRA20_MC_RESET_2D>;
+			reset-names = "2d", "mc";
+			power-domains = <&pd_core>;
+			operating-points-v2 = <&gr2d_dvfs_opp_table>;
 		};
 
 		gr3d@54180000 {
 			compatible = "nvidia,tegra20-gr3d";
 			reg = <0x54180000 0x00040000>;
 			clocks = <&tegra_car TEGRA20_CLK_GR3D>;
-			resets = <&tegra_car 24>;
-			reset-names = "3d";
+			resets = <&tegra_car 24>, <&mc TEGRA20_MC_RESET_3D>;
+			reset-names = "3d", "mc";
+			power-domains = <&pd_3d>;
+			operating-points-v2 = <&gr3d_dvfs_opp_table>;
 		};
 
 		dc@54200000 {
@@ -110,6 +127,8 @@
 			clock-names = "dc", "parent";
 			resets = <&tegra_car 27>;
 			reset-names = "dc";
+			power-domains = <&pd_core>;
+			operating-points-v2 = <&disp1_dvfs_opp_table>;
 
 			nvidia,head = <0>;
 
@@ -138,6 +157,8 @@
 			clock-names = "dc", "parent";
 			resets = <&tegra_car 26>;
 			reset-names = "dc";
+			power-domains = <&pd_core>;
+			operating-points-v2 = <&disp2_dvfs_opp_table>;
 
 			nvidia,head = <1>;
 
@@ -157,7 +178,7 @@
 			};
 		};
 
-		hdmi@54280000 {
+		tegra_hdmi: hdmi@54280000 {
 			compatible = "nvidia,tegra20-hdmi";
 			reg = <0x54280000 0x00040000>;
 			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
@@ -166,6 +187,9 @@
 			clock-names = "hdmi", "parent";
 			resets = <&tegra_car 51>;
 			reset-names = "hdmi";
+			power-domains = <&pd_core>;
+			operating-points-v2 = <&hdmi_dvfs_opp_table>;
+			#sound-dai-cells = <0>;
 			status = "disabled";
 		};
 
@@ -174,6 +198,8 @@
 			reg = <0x542c0000 0x00040000>;
 			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&tegra_car TEGRA20_CLK_TVO>;
+			power-domains = <&pd_core>;
+			operating-points-v2 = <&tvo_dvfs_opp_table>;
 			status = "disabled";
 		};
 
@@ -185,6 +211,8 @@
 			clock-names = "dsi", "parent";
 			resets = <&tegra_car 48>;
 			reset-names = "dsi";
+			power-domains = <&pd_core>;
+			operating-points-v2 = <&dsi_dvfs_opp_table>;
 			status = "disabled";
 		};
 	};
@@ -242,6 +270,13 @@
 		reg = <0x60006000 0x1000>;
 		#clock-cells = <1>;
 		#reset-cells = <1>;
+
+		sclk {
+			compatible = "nvidia,tegra20-sclk";
+			clocks = <&tegra_car TEGRA20_CLK_SCLK>;
+			power-domains = <&pd_core>;
+			operating-points-v2 = <&sclk_dvfs_opp_table>;
+		};
 	};
 
 	flow-controller@60007000 {
@@ -293,9 +328,7 @@
 		gpio-controller;
 		#interrupt-cells = <2>;
 		interrupt-controller;
-		/*
 		gpio-ranges = <&pinmux 0 0 224>;
-		*/
 	};
 
 	vde@6001a000 {
@@ -319,6 +352,8 @@
 		clocks = <&tegra_car TEGRA20_CLK_VDE>;
 		reset-names = "vde", "mc";
 		resets = <&tegra_car 61>, <&mc TEGRA20_MC_RESET_VDE>;
+		power-domains = <&pd_vde>;
+		operating-points-v2 = <&vde_dvfs_opp_table>;
 	};
 
 	apbmisc@70000800 {
@@ -352,6 +387,23 @@
 		status = "disabled";
 	};
 
+	tegra_spdif: spdif@70002400 {
+		compatible = "nvidia,tegra20-spdif";
+		reg = <0x70002400 0x200>;
+		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA20_CLK_SPDIF_OUT>,
+			 <&tegra_car TEGRA20_CLK_SPDIF_IN>;
+		clock-names = "out", "in";
+		resets = <&tegra_car 10>;
+		dmas = <&apbdma 3>, <&apbdma 3>;
+		dma-names = "rx", "tx";
+		#sound-dai-cells = <0>;
+		status = "disabled";
+
+		assigned-clocks = <&tegra_car TEGRA20_CLK_SPDIF_OUT>;
+		assigned-clock-parents = <&tegra_car TEGRA20_CLK_PLL_A_OUT0>;
+	};
+
 	tegra_i2s1: i2s@70002800 {
 		compatible = "nvidia,tegra20-i2s";
 		reg = <0x70002800 0x200>;
@@ -460,6 +512,8 @@
 		reset-names = "nand";
 		assigned-clocks = <&tegra_car TEGRA20_CLK_NDFLASH>;
 		assigned-clock-rates = <150000000>;
+		power-domains = <&pd_core>;
+		operating-points-v2 = <&ndflash_dvfs_opp_table>;
 		status = "disabled";
 	};
 
@@ -473,6 +527,8 @@
 		clock-names = "gmi";
 		resets = <&tegra_car 42>;
 		reset-names = "gmi";
+		power-domains = <&pd_core>;
+		operating-points-v2 = <&nor_dvfs_opp_table>;
 		status = "disabled";
 	};
 
@@ -523,7 +579,7 @@
 		status = "disabled";
 	};
 
-	i2c@7000c400 {
+	i2c2: i2c@7000c400 {
 		compatible = "nvidia,tegra20-i2c";
 		reg = <0x7000c400 0x100>;
 		interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
@@ -643,6 +699,52 @@
 		clocks = <&tegra_car TEGRA20_CLK_PCLK>, <&clk32k_in>;
 		clock-names = "pclk", "clk32k_in";
 		#clock-cells = <1>;
+
+		pd_core: core-domain {
+			#power-domain-cells = <0>;
+			operating-points-v2 = <&core_opp_table>;
+		};
+
+		powergates {
+			pd_3d: td {
+				clocks = <&tegra_car TEGRA20_CLK_GR3D>;
+				resets = <&mc TEGRA20_MC_RESET_3D>,
+					 <&tegra_car TEGRA20_CLK_GR3D>;
+				power-domains = <&pd_core>;
+				#power-domain-cells = <0>;
+			};
+
+			pd_venc: venc {
+				clocks = <&tegra_car TEGRA20_CLK_ISP>,
+					 <&tegra_car TEGRA20_CLK_VI>,
+					 <&tegra_car TEGRA20_CLK_CSI>;
+				resets = <&mc TEGRA20_MC_RESET_ISP>,
+					 <&mc TEGRA20_MC_RESET_VI>,
+					 <&tegra_car TEGRA20_CLK_ISP>,
+					 <&tegra_car 20 /* VI */>,
+					 <&tegra_car TEGRA20_CLK_CSI>;
+				power-domains = <&pd_core>;
+				#power-domain-cells = <0>;
+			};
+
+			pd_vde: vdec {
+				clocks = <&tegra_car TEGRA20_CLK_VDE>;
+				resets = <&mc TEGRA20_MC_RESET_VDE>,
+					 <&tegra_car TEGRA20_CLK_VDE>;
+				power-domains = <&pd_core>;
+				#power-domain-cells = <0>;
+			};
+
+			pd_mpe: mpe {
+				clocks = <&tegra_car TEGRA20_CLK_MPE>;
+				resets = <&mc TEGRA20_MC_RESET_MPEA>,
+					 <&mc TEGRA20_MC_RESET_MPEB>,
+					 <&mc TEGRA20_MC_RESET_MPEC>,
+					 <&tegra_car TEGRA20_CLK_MPE>;
+				power-domains = <&pd_core>;
+				#power-domain-cells = <0>;
+			};
+		};
 	};
 
 	mc: memory-controller@7000f000 {
@@ -662,12 +764,13 @@
 		reg = <0x7000f400 0x400>;
 		interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA20_CLK_EMC>;
+		power-domains = <&pd_core>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 		#interconnect-cells = <0>;
 
-		operating-points-v2 = <&emc_icc_dvfs_opp_table>;
 		nvidia,memory-controller = <&mc>;
+		operating-points-v2 = <&emc_icc_dvfs_opp_table>;
 	};
 
 	fuse@7000f800 {
@@ -712,6 +815,9 @@
 			 <&tegra_car 72>,
 			 <&tegra_car 74>;
 		reset-names = "pex", "afi", "pcie_x";
+		power-domains = <&pd_core>;
+		operating-points-v2 = <&pcie_dvfs_opp_table>;
+
 		status = "disabled";
 
 		pci@1,0 {
@@ -753,6 +859,8 @@
 		reset-names = "usb";
 		nvidia,needs-double-reset;
 		nvidia,phy = <&phy1>;
+		power-domains = <&pd_core>;
+		operating-points-v2 = <&usbd_dvfs_opp_table>;
 		status = "disabled";
 	};
 
@@ -792,6 +900,8 @@
 		resets = <&tegra_car 58>;
 		reset-names = "usb";
 		nvidia,phy = <&phy2>;
+		power-domains = <&pd_core>;
+		operating-points-v2 = <&usb2_dvfs_opp_table>;
 		status = "disabled";
 	};
 
@@ -820,6 +930,8 @@
 		resets = <&tegra_car 59>;
 		reset-names = "usb";
 		nvidia,phy = <&phy3>;
+		power-domains = <&pd_core>;
+		operating-points-v2 = <&usb3_dvfs_opp_table>;
 		status = "disabled";
 	};
 
@@ -856,6 +968,8 @@
 		clock-names = "sdhci";
 		resets = <&tegra_car 14>;
 		reset-names = "sdhci";
+		power-domains = <&pd_core>;
+		operating-points-v2 = <&sdmmc1_dvfs_opp_table>;
 		status = "disabled";
 	};
 
@@ -867,6 +981,8 @@
 		clock-names = "sdhci";
 		resets = <&tegra_car 9>;
 		reset-names = "sdhci";
+		power-domains = <&pd_core>;
+		operating-points-v2 = <&sdmmc2_dvfs_opp_table>;
 		status = "disabled";
 	};
 
@@ -878,6 +994,8 @@
 		clock-names = "sdhci";
 		resets = <&tegra_car 69>;
 		reset-names = "sdhci";
+		power-domains = <&pd_core>;
+		operating-points-v2 = <&sdmmc3_dvfs_opp_table>;
 		status = "disabled";
 	};
 
@@ -889,6 +1007,8 @@
 		clock-names = "sdhci";
 		resets = <&tegra_car 15>;
 		reset-names = "sdhci";
+		power-domains = <&pd_core>;
+		operating-points-v2 = <&sdmmc4_dvfs_opp_table>;
 		status = "disabled";
 	};
 
@@ -918,4 +1038,24 @@
 		interrupt-affinity = <&{/cpus/cpu@0}>,
 				     <&{/cpus/cpu@1}>;
 	};
+
+	sound-hdmi {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "NVIDIA Tegra20 HDMI";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		simple-audio-card,dai-link@0 {
+			reg = <0>;
+
+			cpu {
+				sound-dai = <&tegra_spdif>;
+			};
+
+			codec {
+				sound-dai = <&tegra_hdmi>;
+			};
+		};
+	};
 };
diff --git a/dts/src/arm/tegra30-apalis-eval.dts b/dts/src/arm/tegra30-apalis-eval.dts
index 9f653ef41d..93b83b3c56 100644
--- a/dts/src/arm/tegra30-apalis-eval.dts
+++ b/dts/src/arm/tegra30-apalis-eval.dts
@@ -239,7 +239,7 @@
 
 &gpio {
 	/* Apalis GPIO7 MXM3 pin 15 PLX PEX 8605 PCIe Switch Reset */
-	pex-perst-n {
+	pex-perst-n-hog {
 		gpio-hog;
 		gpios = <TEGRA_GPIO(S, 7) GPIO_ACTIVE_HIGH>;
 		output-high;
diff --git a/dts/src/arm/tegra30-apalis-v1.1-eval.dts b/dts/src/arm/tegra30-apalis-v1.1-eval.dts
index 86e138e8c7..fbfa75e53f 100644
--- a/dts/src/arm/tegra30-apalis-v1.1-eval.dts
+++ b/dts/src/arm/tegra30-apalis-v1.1-eval.dts
@@ -257,7 +257,7 @@
 
 &gpio {
 	/* Apalis GPIO7 MXM3 pin 15 PLX PEX 8605 PCIe Switch Reset */
-	pex-perst-n {
+	pex-perst-n-hog {
 		gpio-hog;
 		gpios = <TEGRA_GPIO(S, 7) GPIO_ACTIVE_HIGH>;
 		output-high;
diff --git a/dts/src/arm/tegra30-apalis-v1.1.dtsi b/dts/src/arm/tegra30-apalis-v1.1.dtsi
index 6a3a72f81c..380f22a358 100644
--- a/dts/src/arm/tegra30-apalis-v1.1.dtsi
+++ b/dts/src/arm/tegra30-apalis-v1.1.dtsi
@@ -829,14 +829,17 @@
 
 	serial@70006040 {
 		compatible = "nvidia,tegra30-hsuart";
+		/delete-property/ reg-shift;
 	};
 
 	serial@70006200 {
 		compatible = "nvidia,tegra30-hsuart";
+		/delete-property/ reg-shift;
 	};
 
 	serial@70006300 {
 		compatible = "nvidia,tegra30-hsuart";
+		/delete-property/ reg-shift;
 	};
 
 	hdmi_ddc: i2c@7000c700 {
@@ -1047,9 +1050,6 @@
 			regulator-max-microvolt = <1400000>;
 			regulator-boot-on;
 			regulator-always-on;
-			ti,vsel0-state-low;
-			/* VSEL1: EN_CORE_DVFS_N low for DVFS */
-			ti,vsel1-state-low;
 		};
 	};
 
diff --git a/dts/src/arm/tegra30-apalis.dtsi b/dts/src/arm/tegra30-apalis.dtsi
index b2ac51fb15..9bdc4cb714 100644
--- a/dts/src/arm/tegra30-apalis.dtsi
+++ b/dts/src/arm/tegra30-apalis.dtsi
@@ -820,14 +820,17 @@
 
 	serial@70006040 {
 		compatible = "nvidia,tegra30-hsuart";
+		/delete-property/ reg-shift;
 	};
 
 	serial@70006200 {
 		compatible = "nvidia,tegra30-hsuart";
+		/delete-property/ reg-shift;
 	};
 
 	serial@70006300 {
 		compatible = "nvidia,tegra30-hsuart";
+		/delete-property/ reg-shift;
 	};
 
 	hdmi_ddc: i2c@7000c700 {
@@ -1030,9 +1033,6 @@
 			regulator-max-microvolt = <1400000>;
 			regulator-boot-on;
 			regulator-always-on;
-			ti,vsel0-state-low;
-			/* VSEL1: EN_CORE_DVFS_N low for DVFS */
-			ti,vsel1-state-low;
 		};
 	};
 
diff --git a/dts/src/arm/tegra30-asus-lvds-display.dtsi b/dts/src/arm/tegra30-asus-lvds-display.dtsi
new file mode 100644
index 0000000000..a047abfa63
--- /dev/null
+++ b/dts/src/arm/tegra30-asus-lvds-display.dtsi
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/* This dtsi file describes parts common for Asus T30 devices with a LVDS panel. */
+
+/ {
+	host1x@50000000 {
+		lcd: dc@54200000 {
+			rgb {
+				status = "okay";
+
+				port@0 {
+					dpi_output: endpoint {
+						remote-endpoint = <&bridge_input>;
+						bus-width = <24>;
+					};
+				};
+			};
+		};
+	};
+
+	display-panel {
+		power-supply = <&vdd_pnl>;
+		ddc-i2c-bus = <&lcd_ddc>;
+		backlight = <&backlight>;
+
+		port {
+			panel_input: endpoint {
+				remote-endpoint = <&bridge_output>;
+			};
+		};
+	};
+
+	/* Texas Instruments SN75LVDS83B LVDS Transmitter */
+	lvds-encoder {
+		compatible = "ti,sn75lvds83", "lvds-encoder";
+
+		powerdown-gpios = <&gpio TEGRA_GPIO(N, 6) GPIO_ACTIVE_LOW>;
+		power-supply = <&vdd_3v3_sys>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				bridge_input: endpoint {
+					remote-endpoint = <&dpi_output>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				bridge_output: endpoint {
+					remote-endpoint = <&panel_input>;
+				};
+			};
+		};
+	};
+};
diff --git a/dts/src/arm/tegra30-asus-nexus7-grouper-common.dtsi b/dts/src/arm/tegra30-asus-nexus7-grouper-common.dtsi
index 07d4ea1309..2c2ad2a38f 100644
--- a/dts/src/arm/tegra30-asus-nexus7-grouper-common.dtsi
+++ b/dts/src/arm/tegra30-asus-nexus7-grouper-common.dtsi
@@ -8,6 +8,7 @@
 #include "tegra30.dtsi"
 #include "tegra30-cpu-opp.dtsi"
 #include "tegra30-cpu-opp-microvolt.dtsi"
+#include "tegra30-asus-lvds-display.dtsi"
 
 / {
 	aliases {
@@ -59,21 +60,6 @@
 		};
 	};
 
-	host1x@50000000 {
-		dc@54200000 {
-			rgb {
-				status = "okay";
-
-				port@0 {
-					lcd_output: endpoint {
-						remote-endpoint = <&lvds_encoder_input>;
-						bus-width = <24>;
-					};
-				};
-			};
-		};
-	};
-
 	gpio@6000d000 {
 		init-mode-hog {
 			gpio-hog;
@@ -804,11 +790,13 @@
 
 	uartb: serial@70006040 {
 		compatible = "nvidia,tegra30-hsuart";
+		/delete-property/ reg-shift;
 		/* GPS BCM4751 */
 	};
 
 	uartc: serial@70006200 {
 		compatible = "nvidia,tegra30-hsuart";
+		/delete-property/ reg-shift;
 		status = "okay";
 
 		nvidia,adjust-baud-rates = <0 9600 100>,
@@ -980,6 +968,7 @@
 		nvidia,core-pwr-off-time = <0>;
 		nvidia,core-power-req-active-high;
 		nvidia,sys-clock-req-active-high;
+		core-supply = <&vdd_core>;
 	};
 
 	ahub@70080000 {
@@ -1069,7 +1058,7 @@
 	};
 
 	/* PMIC has a built-in 32KHz oscillator which is used by PMC */
-	clk32k_in: clock@0 {
+	clk32k_in: clock-32k {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <32768>;
@@ -1114,20 +1103,14 @@
 		 */
 		compatible = "panel-lvds";
 
-		power-supply = <&vdd_pnl>;
-		backlight = <&backlight>;
-
 		width-mm = <94>;
 		height-mm = <150>;
 		rotation = <180>;
 
 		data-mapping = "jeida-24";
 
-		port {
-			panel_input: endpoint {
-				remote-endpoint = <&lvds_encoder_output>;
-			};
-		};
+		/* DDC unconnected on Nexus 7 */
+		/delete-property/ ddc-i2c-bus;
 	};
 
 	firmware {
@@ -1179,35 +1162,7 @@
 		};
 	};
 
-	lvds-encoder {
-		compatible = "ti,sn75lvds83", "lvds-encoder";
-
-		powerdown-gpios = <&gpio TEGRA_GPIO(N, 6) GPIO_ACTIVE_LOW>;
-		power-supply = <&vdd_3v3_sys>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-
-				lvds_encoder_input: endpoint {
-					remote-endpoint = <&lcd_output>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-
-				lvds_encoder_output: endpoint {
-					remote-endpoint = <&panel_input>;
-				};
-			};
-		};
-	};
-
-	vdd_5v0_sys: regulator@0 {
+	vdd_5v0_sys: regulator-5v0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_5v0";
 		regulator-min-microvolt = <5000000>;
@@ -1216,7 +1171,7 @@
 		regulator-boot-on;
 	};
 
-	vdd_3v3_sys: regulator@1 {
+	vdd_3v3_sys: regulator-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_3v3";
 		regulator-min-microvolt = <3300000>;
@@ -1226,7 +1181,7 @@
 		vin-supply = <&vdd_5v0_sys>;
 	};
 
-	vdd_pnl: regulator@2 {
+	vdd_pnl: regulator-panel {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_panel";
 		regulator-min-microvolt = <3300000>;
@@ -1237,7 +1192,7 @@
 		vin-supply = <&vdd_3v3_sys>;
 	};
 
-	vcc_3v3_ts: regulator@3 {
+	vcc_3v3_ts: regulator-ts {
 		compatible = "regulator-fixed";
 		regulator-name = "ldo_s-1167_3v3";
 		regulator-min-microvolt = <3300000>;
diff --git a/dts/src/arm/tegra30-asus-nexus7-grouper-maxim-pmic.dtsi b/dts/src/arm/tegra30-asus-nexus7-grouper-maxim-pmic.dtsi
index 53966fa4ee..cd28e8782f 100644
--- a/dts/src/arm/tegra30-asus-nexus7-grouper-maxim-pmic.dtsi
+++ b/dts/src/arm/tegra30-asus-nexus7-grouper-maxim-pmic.dtsi
@@ -166,12 +166,12 @@
 		};
 	};
 
-	vdd_3v3_sys: regulator@1 {
+	vdd_3v3_sys: regulator-3v3 {
 		gpio = <&pmic 3 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};
 
-	regulator@4 {
+	regulator-usb {
 		compatible = "regulator-fixed";
 		regulator-name = "avdd_usb";
 		regulator-min-microvolt = <3300000>;
diff --git a/dts/src/arm/tegra30-asus-nexus7-grouper-memory-timings.dtsi b/dts/src/arm/tegra30-asus-nexus7-grouper-memory-timings.dtsi
index bcff0997ee..6c229e1d67 100644
--- a/dts/src/arm/tegra30-asus-nexus7-grouper-memory-timings.dtsi
+++ b/dts/src/arm/tegra30-asus-nexus7-grouper-memory-timings.dtsi
@@ -1565,13 +1565,13 @@
 };
 
 &emc_icc_dvfs_opp_table {
-	/delete-node/ opp@750000000,1300;
-	/delete-node/ opp@800000000,1300;
-	/delete-node/ opp@900000000,1350;
+	/delete-node/ opp-750000000-1300;
+	/delete-node/ opp-800000000-1300;
+	/delete-node/ opp-900000000-1350;
 };
 
 &emc_bw_dfs_opp_table {
-	/delete-node/ opp@750000000;
-	/delete-node/ opp@800000000;
-	/delete-node/ opp@900000000;
+	/delete-node/ opp-750000000;
+	/delete-node/ opp-800000000;
+	/delete-node/ opp-900000000;
 };
diff --git a/dts/src/arm/tegra30-asus-nexus7-grouper-ti-pmic.dtsi b/dts/src/arm/tegra30-asus-nexus7-grouper-ti-pmic.dtsi
index 9365ae6072..ee4a3f4827 100644
--- a/dts/src/arm/tegra30-asus-nexus7-grouper-ti-pmic.dtsi
+++ b/dts/src/arm/tegra30-asus-nexus7-grouper-ti-pmic.dtsi
@@ -143,7 +143,7 @@
 		};
 	};
 
-	vdd_3v3_sys: regulator@1 {
+	vdd_3v3_sys: regulator-3v3 {
 		gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};
diff --git a/dts/src/arm/tegra30-asus-nexus7-grouper.dtsi b/dts/src/arm/tegra30-asus-nexus7-grouper.dtsi
index a044dbd200..564cfcde21 100644
--- a/dts/src/arm/tegra30-asus-nexus7-grouper.dtsi
+++ b/dts/src/arm/tegra30-asus-nexus7-grouper.dtsi
@@ -137,7 +137,6 @@
 		nfc@28 {
 			compatible = "nxp,pn544-i2c";
 			reg = <0x28>;
-			clock-frequency = <100000>;
 
 			interrupt-parent = <&gpio>;
 			interrupts = <TEGRA_GPIO(X, 0) IRQ_TYPE_EDGE_RISING>;
diff --git a/dts/src/arm/tegra30-asus-nexus7-tilapia.dtsi b/dts/src/arm/tegra30-asus-nexus7-tilapia.dtsi
index a681ad51fd..cd63e0ef74 100644
--- a/dts/src/arm/tegra30-asus-nexus7-tilapia.dtsi
+++ b/dts/src/arm/tegra30-asus-nexus7-tilapia.dtsi
@@ -223,8 +223,6 @@
 			compatible = "nxp,pn544-i2c";
 			reg = <0x2a>;
 
-			clock-frequency = <100000>;
-
 			interrupt-parent = <&gpio>;
 			interrupts = <TEGRA_GPIO(S, 7) IRQ_TYPE_EDGE_RISING>;
 
diff --git a/dts/src/arm/tegra30-asus-tf201.dts b/dts/src/arm/tegra30-asus-tf201.dts
new file mode 100644
index 0000000000..315c6dc068
--- /dev/null
+++ b/dts/src/arm/tegra30-asus-tf201.dts
@@ -0,0 +1,627 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra30-asus-transformer-common.dtsi"
+#include "tegra30-asus-lvds-display.dtsi"
+
+/ {
+	model = "Asus Transformer Prime TF201";
+	compatible = "asus,tf201", "nvidia,tegra30";
+
+	pinmux@70000868 {
+		state_default: pinmux {
+			lcd_pwr2_pc6 {
+				nvidia,pins = "lcd_pwr2_pc6",
+						"lcd_dc1_pd2";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pbb3 {
+				nvidia,pins = "pbb3";
+				nvidia,function = "vgp3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pbb7 {
+				nvidia,pins = "pbb7";
+				nvidia,function = "i2s4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			kb_row7_pr7 {
+				nvidia,pins = "kb_row7_pr7";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi_cs4_n_pk2 {
+				nvidia,pins = "gmi_cs4_n_pk2";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+		};
+	};
+
+	serial@70006200 {
+		/* Azurewave AW-NH615 BCM4329B1 */
+		bluetooth {
+			compatible = "brcm,bcm4329-bt";
+		};
+	};
+
+	i2c@7000c400 {
+		/* Atmel MXT768E touchscreen */
+		touchscreen@4d {
+			compatible = "atmel,maxtouch";
+			reg = <0x4d>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(H, 4) IRQ_TYPE_EDGE_FALLING>;
+			reset-gpios = <&gpio TEGRA_GPIO(H, 6) GPIO_ACTIVE_LOW>;
+
+			vdda-supply = <&vdd_3v3_sys>;
+			vdd-supply  = <&vdd_3v3_sys>;
+		};
+	};
+
+	i2c@7000c500 {
+		clock-frequency = <100000>;
+
+		magnetometer@e {
+			mount-matrix =  "-1",  "0",  "0",
+					 "0", "-1",  "0",
+					 "0",  "0", "-1";
+		};
+
+		gyroscope@68 {
+			mount-matrix =   "0", "-1",  "0",
+					"-1",  "0",  "0",
+					 "0",  "0", "-1";
+
+			/* External I2C interface */
+			i2c-gate {
+				accelerometer@f {
+					mount-matrix =   "1",  "0",  "0",
+							 "0", "-1",  "0",
+							 "0",  "0",  "1";
+				};
+			};
+		};
+	};
+
+	i2c@7000d000 {
+		/* Realtek ALC5631 audio codec */
+		rt5631: audio-codec@1a {
+			compatible = "realtek,rt5631";
+			reg = <0x1a>;
+		};
+	};
+
+	memory-controller@7000f000 {
+		emc-timings-0 {
+			/* Elpida 1GB EDB8132B2MA-8D-F LPDDR2 400MHz */
+			nvidia,ram-code = <0>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emem-configuration = < 0x00020001 0x80000010
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000003 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000002 0x00000002
+					0x02020001 0x00060402 0x73e30303 0x001f0000 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emem-configuration = < 0x00010001 0x80000010
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000003 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000002 0x00000002
+					0x02020001 0x00060402 0x72c30303 0x001f0000 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = < 0x00000001 0x80000018
+					0x00000001 0x00000001 0x00000003 0x00000001
+					0x00000003 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000002 0x00000002
+					0x02020001 0x00060403 0x72430504 0x001f0000 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = < 0x00000003 0x80000025
+					0x00000001 0x00000001 0x00000006 0x00000003
+					0x00000005 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000003 0x00000002
+					0x02030001 0x00070506 0x71e40a07 0x001f0000 >;
+			};
+
+			timing-400000000 {
+				clock-frequency = <400000000>;
+
+				nvidia,emem-configuration = < 0x00000006 0x80000048
+					0x00000002 0x00000003 0x0000000c 0x00000007
+					0x00000009 0x00000001 0x00000002 0x00000006
+					0x00000001 0x00000000 0x00000004 0x00000004
+					0x04040001 0x000d090c 0x71c6120d 0x001f0000 >;
+			};
+		};
+
+		emc-timings-1 {
+			/* TF201 Unknown 1GB LPDDR2 500MHZ */
+			nvidia,ram-code = <1>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emem-configuration = < 0x00020001 0x80000010
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000003 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000002 0x00000002
+					0x02020001 0x00060402 0x73e30303 0x001f0000 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emem-configuration = < 0x00010001 0x80000010
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000003 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000002 0x00000002
+					0x02020001 0x00060402 0x72c30303 0x001f0000 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = < 0x00000001 0x80000018
+					0x00000001 0x00000001 0x00000003 0x00000001
+					0x00000003 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000002 0x00000002
+					0x02020001 0x00060403 0x72430504 0x001f0000 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = < 0x00000003 0x80000025
+					0x00000001 0x00000001 0x00000006 0x00000003
+					0x00000005 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000003 0x00000002
+					0x02030001 0x00070506 0x71e40a07 0x001f0000 >;
+			};
+
+			timing-500000000 {
+				clock-frequency = <500000000>;
+
+				nvidia,emem-configuration = < 0x00000007 0x8000005a
+					0x00000003 0x00000004 0x0000000e 0x00000009
+					0x0000000c 0x00000002 0x00000002 0x00000008
+					0x00000001 0x00000000 0x00000004 0x00000005
+					0x05040001 0x00100a0e 0x71c8170f 0x001f0000 >;
+			};
+		};
+	};
+
+	memory-controller@7000f400 {
+		emc-timings-0 {
+			/* Elpida 1GB EDB8132B2MA-8D-F LPDDR2 400MHz */
+			nvidia,ram-code = <0>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010022>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000009>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000001
+					0x00000003 0x00000002 0x00000002 0x00000004
+					0x00000004 0x00000001 0x00000005 0x00000002
+					0x00000002 0x00000001 0x00000001 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000b
+					0x0000000a 0x00000060 0x00000000 0x00000018
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000007 0x00000004 0x00000004
+					0x00000003 0x00000008 0x00000004 0x00000004
+					0x00000002 0x0000006b 0x00000004 0x00000004
+					0x00000000 0x00000000 0x00004282 0x00780084
+					0x00008000 0x00098000 0x00098000 0x00098000
+					0x00098000 0x00000010 0x00000010 0x00000010
+					0x00000010 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000008 0x00000008 0x00000008
+					0x00000008 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00100220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00000000
+					0x00000009 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x800001c5 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010022>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000009>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000003
+					0x00000006 0x00000002 0x00000002 0x00000004
+					0x00000004 0x00000001 0x00000005 0x00000002
+					0x00000002 0x00000001 0x00000001 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000b
+					0x0000000a 0x000000c0 0x00000000 0x00000030
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000007 0x00000008 0x00000008
+					0x00000003 0x00000008 0x00000004 0x00000004
+					0x00000002 0x000000d5 0x00000004 0x00000004
+					0x00000000 0x00000000 0x00004282 0x00780084
+					0x00008000 0x00098000 0x00098000 0x00098000
+					0x00098000 0x00000010 0x00000010 0x00000010
+					0x00000010 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000018 0x00000018 0x00000018
+					0x00000018 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00100220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00000000
+					0x00000009 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x80000287 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010022>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x0000000a>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000006
+					0x0000000d 0x00000004 0x00000002 0x00000004
+					0x00000004 0x00000001 0x00000005 0x00000002
+					0x00000002 0x00000001 0x00000001 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000b
+					0x0000000a 0x00000181 0x00000000 0x00000060
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000007 0x0000000f 0x0000000f
+					0x00000003 0x00000008 0x00000004 0x00000004
+					0x00000002 0x000001a9 0x00000004 0x00000006
+					0x00000000 0x00000000 0x00004282 0x00780084
+					0x00008000 0x000a0000 0x000a0000 0x000a0000
+					0x000a0000 0x00000010 0x00000010 0x00000010
+					0x00000010 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000008 0x00000008 0x00000008
+					0x00000008 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00120220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00000000
+					0x0000000a 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x8000040b 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010042>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000013>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x0000000c
+					0x0000001a 0x00000008 0x00000003 0x00000005
+					0x00000004 0x00000001 0x00000006 0x00000003
+					0x00000003 0x00000002 0x00000002 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000c
+					0x0000000a 0x00000303 0x00000000 0x000000c0
+					0x00000001 0x00000001 0x00000003 0x00000000
+					0x00000001 0x00000007 0x0000001d 0x0000001d
+					0x00000004 0x0000000b 0x00000005 0x00000004
+					0x00000002 0x00000351 0x00000004 0x00000006
+					0x00000000 0x00000000 0x00004282 0x00440084
+					0x00008000 0x00074000 0x00074000 0x00074000
+					0x00074000 0x00000010 0x00000010 0x00000010
+					0x00000010 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000018 0x00000018 0x00000018
+					0x00000018 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00078000 0x00078000 0x00078000
+					0x00078000 0x00100220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00000000
+					0x00000013 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x80000713 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-400000000 {
+				clock-frequency = <400000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010082>;
+				nvidia,emc-mode-2 = <0x00020004>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000024>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000017
+					0x00000033 0x00000010 0x00000007 0x00000007
+					0x00000007 0x00000002 0x0000000a 0x00000007
+					0x00000007 0x00000003 0x00000002 0x00000000
+					0x00000003 0x00000007 0x00000004 0x0000000d
+					0x0000000e 0x000005e9 0x00000000 0x0000017a
+					0x00000002 0x00000002 0x00000007 0x00000000
+					0x00000001 0x0000000c 0x00000038 0x00000038
+					0x00000006 0x00000014 0x00000009 0x00000004
+					0x00000002 0x00000680 0x00000000 0x00000006
+					0x00000000 0x00000000 0x00006282 0x001d0084
+					0x00008000 0x0002c000 0x0002c000 0x0002c000
+					0x0002c000 0x00000010 0x00000010 0x00000010
+					0x00000010 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000008 0x00000008 0x00000008
+					0x00000008 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00048000 0x00048000 0x00048000
+					0x00048000 0x000c0220 0x0800003d 0x00000000
+					0x77ffc004 0x01f1f408 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00000000
+					0x00000024 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000ce6 0xe0000000 0xff00ff88 >;
+			};
+		};
+
+		emc-timings-1 {
+			/* TF201 Unknown 1GB LPDDR2 500MHZ */
+			nvidia,ram-code = <1>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010022>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000009>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000001
+					0x00000003 0x00000002 0x00000002 0x00000004
+					0x00000004 0x00000001 0x00000005 0x00000002
+					0x00000002 0x00000001 0x00000001 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000b
+					0x00000009 0x00000060 0x00000000 0x00000018
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000007 0x00000004 0x00000004
+					0x00000003 0x00000008 0x00000004 0x00000004
+					0x00000002 0x0000006b 0x00000004 0x00000004
+					0x00000000 0x00000000 0x00004282 0x00780084
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00100220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x0000000a 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x800001c5 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010022>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000009>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000003
+					0x00000006 0x00000002 0x00000002 0x00000004
+					0x00000004 0x00000001 0x00000005 0x00000002
+					0x00000002 0x00000001 0x00000001 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000b
+					0x00000009 0x000000c0 0x00000000 0x00000030
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000007 0x00000008 0x00000008
+					0x00000003 0x00000008 0x00000004 0x00000004
+					0x00000002 0x000000d5 0x00000004 0x00000004
+					0x00000000 0x00000000 0x00004282 0x00780084
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00100220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x00000013 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x80000287 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010022>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x0000000a>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000006
+					0x0000000d 0x00000004 0x00000002 0x00000004
+					0x00000004 0x00000001 0x00000005 0x00000002
+					0x00000002 0x00000001 0x00000001 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000b
+					0x00000009 0x00000181 0x00000000 0x00000060
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000007 0x0000000f 0x0000000f
+					0x00000003 0x00000008 0x00000004 0x00000004
+					0x00000002 0x000001a9 0x00000004 0x00000004
+					0x00000000 0x00000000 0x00004282 0x00780084
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00100220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x00000025 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x8000040b 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010042>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000013>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x0000000c
+					0x0000001a 0x00000008 0x00000003 0x00000005
+					0x00000004 0x00000001 0x00000006 0x00000003
+					0x00000003 0x00000002 0x00000002 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000c
+					0x0000000a 0x00000303 0x00000000 0x000000c0
+					0x00000001 0x00000001 0x00000003 0x00000000
+					0x00000001 0x00000007 0x0000001d 0x0000001d
+					0x00000004 0x0000000b 0x00000005 0x00000004
+					0x00000002 0x00000351 0x00000004 0x00000006
+					0x00000000 0x00000000 0x00004282 0x00440084
+					0x00008000 0x00060000 0x00060000 0x00060000
+					0x00060000 0x00072000 0x00072000 0x00072000
+					0x00072000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000d0000 0x000d0000 0x000d0000
+					0x000d0000 0x000e0220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x0000004a 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x80000713 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-500000000 {
+				clock-frequency = <500000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x000100c2>;
+				nvidia,emc-mode-2 = <0x00020005>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x0000002d>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x0000001d
+					0x00000040 0x00000014 0x00000008 0x00000007
+					0x00000009 0x00000003 0x0000000d 0x00000008
+					0x00000008 0x00000004 0x00000002 0x00000000
+					0x00000004 0x00000008 0x00000005 0x0000000d
+					0x0000000f 0x00000763 0x00000000 0x000001d8
+					0x00000003 0x00000003 0x00000008 0x00000000
+					0x00000001 0x0000000e 0x00000046 0x00000046
+					0x00000008 0x00000019 0x0000000b 0x00000004
+					0x00000002 0x00000820 0x00000000 0x00000006
+					0x00000000 0x00000000 0x00006282 0xf0140091
+					0x00008000 0x00000008 0x00000008 0x00000008
+					0x00000008 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x0000000c 0x0000000c 0x0000000c
+					0x0000000c 0x00080220 0x0800003d 0x00000000
+					0x77ffc004 0x01f1f408 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x000000b4 0x000d000d 0xa0f10404 0x00000000
+					0x00000000 0x80000fde 0xe0000000 0xff00ff88 >;
+			};
+		};
+	};
+
+	usb-phy@7d000000 {
+		/delete-property/ nvidia,xcvr-setup-use-fuses;
+		nvidia,xcvr-setup = <5>;      /* Based on TF201 fuse value - 48 */
+	};
+
+	usb-phy@7d008000 {
+		/delete-property/ nvidia,xcvr-setup-use-fuses;
+		nvidia,xcvr-setup = <5>;      /* Based on TF201 fuse value - 48 */
+	};
+
+	display-panel {
+		compatible = "hannstar,hsd101pww2";
+	};
+
+	haptic-feedback {
+		compatible = "gpio-vibrator";
+		enable-gpios = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_HIGH>;
+		vcc-supply = <&vdd_3v3_sys>;
+	};
+};
+
+&emc_icc_dvfs_opp_table {
+	/delete-node/ opp-533000000-1200;
+	/delete-node/ opp-625000000-1200;
+	/delete-node/ opp-625000000-1250;
+	/delete-node/ opp-667000000-1200;
+	/delete-node/ opp-750000000-1300;
+	/delete-node/ opp-800000000-1300;
+	/delete-node/ opp-900000000-1350;
+};
+
+&emc_bw_dfs_opp_table {
+	/delete-node/ opp-533000000;
+	/delete-node/ opp-625000000;
+	/delete-node/ opp-667000000;
+	/delete-node/ opp-750000000;
+	/delete-node/ opp-800000000;
+	/delete-node/ opp-900000000;
+};
diff --git a/dts/src/arm/tegra30-asus-tf300t.dts b/dts/src/arm/tegra30-asus-tf300t.dts
new file mode 100644
index 0000000000..f47434871a
--- /dev/null
+++ b/dts/src/arm/tegra30-asus-tf300t.dts
@@ -0,0 +1,1034 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra30-asus-transformer-common.dtsi"
+#include "tegra30-asus-lvds-display.dtsi"
+
+/ {
+	model = "Asus Transformer Pad TF300T";
+	compatible = "asus,tf300t", "nvidia,tegra30";
+
+	gpio@6000d000 {
+		tf300t-init-hog {
+			gpio-hog;
+			gpios = <TEGRA_GPIO(BB, 5) GPIO_ACTIVE_HIGH>;
+			output-low;
+		};
+	};
+
+	pinmux@70000868 {
+		state_default: pinmux {
+			lcd_pwr2_pc6 {
+				nvidia,pins = "lcd_pwr2_pc6",
+						"lcd_dc1_pd2";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pbb3 {
+				nvidia,pins = "pbb3";
+				nvidia,function = "vgp3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pbb7 {
+				nvidia,pins = "pbb7";
+				nvidia,function = "i2s4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			kb_row7_pr7 {
+				nvidia,pins = "kb_row7_pr7";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi_cs4_n_pk2 {
+				nvidia,pins = "gmi_cs4_n_pk2";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+		};
+	};
+
+	serial@70006200 {
+		/* Azurewave AW-NH615 BCM4329B1 */
+		bluetooth {
+			compatible = "brcm,bcm4329-bt";
+		};
+	};
+
+	i2c@7000c400 {
+		/* Elantech EKTH1036 touchscreen */
+		touchscreen@10 {
+			compatible = "elan,ektf3624";
+			reg = <0x10>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(H, 4) IRQ_TYPE_EDGE_FALLING>;
+			reset-gpios = <&gpio TEGRA_GPIO(H, 6) GPIO_ACTIVE_LOW>;
+
+			vcc33-supply = <&vdd_3v3_sys>;
+			vccio-supply = <&vdd_3v3_sys>;
+
+			touchscreen-size-x = <2240>;
+			touchscreen-size-y = <1408>;
+			touchscreen-inverted-y;
+		};
+	};
+
+	i2c@7000c500 {
+		clock-frequency = <400000>;
+
+		magnetometer@e {
+			mount-matrix =   "0", "-1",  "0",
+					"-1",  "0",  "0",
+					 "0",  "0", "-1";
+		};
+
+		gyroscope@68 {
+			mount-matrix =   "-1",  "0",  "0",
+					  "0",  "1",  "0",
+					  "0",  "0", "-1";
+
+			/* External I2C interface */
+			i2c-gate {
+				accelerometer@f {
+					mount-matrix =   "0", "-1",  "0",
+							"-1",  "0",  "0",
+							 "0",  "0",  "1";
+				};
+			};
+		};
+	};
+
+	i2c@7000d000 {
+		/* Wolfson Microelectronics WM8903 audio codec */
+		wm8903: audio-codec@1a {
+			compatible = "wlf,wm8903";
+			reg = <0x1a>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_LEVEL_LOW>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			micdet-cfg = <0>;
+			micdet-delay = <100>;
+
+			gpio-cfg = <
+				0xffffffff /* don't touch */
+				0xffffffff /* don't touch */
+				0x00000000 /* Speaker-enable GPIO, output, low */
+				0xffffffff /* don't touch */
+				0xffffffff /* don't touch */
+			>;
+
+			AVDD-supply  = <&vdd_1v8_vio>;
+			CPVDD-supply = <&vdd_1v8_vio>;
+			DBVDD-supply = <&vdd_1v8_vio>;
+			DCVDD-supply = <&vdd_1v8_vio>;
+		};
+	};
+
+	memory-controller@7000f000 {
+		emc-timings-0 {
+			/* Elpida 1GB 667MHZ */
+			nvidia,ram-code = <0>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emem-configuration = < 0x00030003 0xc0000020
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0502 0x74830303 0x001f0000 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emem-configuration = < 0x00010003 0xc0000020
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0502 0x73430303 0x001f0000 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = < 0x00000003 0xc0000030
+					0x00000001 0x00000001 0x00000003 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0503 0x72830504 0x001f0000 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = < 0x00000006 0xc0000025
+					0x00000001 0x00000001 0x00000005 0x00000002
+					0x00000003 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0505 0x72440a06 0x001f0000 >;
+			};
+
+			timing-333500000 {
+				clock-frequency = <333500000>;
+
+				nvidia,emem-configuration = < 0x0000000a 0xc000003d
+					0x00000001 0x00000002 0x00000008 0x00000004
+					0x00000004 0x00000001 0x00000002 0x00000007
+					0x00000002 0x00000002 0x00000003 0x00000006
+					0x06030202 0x000b0608 0x70850f09 0x001f0000 >;
+			};
+
+			timing-667000000 {
+				clock-frequency = <667000000>;
+
+				nvidia,emem-configuration = < 0x00000014 0xc0000079
+					0x00000003 0x00000004 0x00000010 0x0000000b
+					0x0000000a 0x00000001 0x00000003 0x0000000b
+					0x00000002 0x00000002 0x00000004 0x00000008
+					0x08040202 0x00130b10 0x70ea1f11 0x001f0000 >;
+			};
+		};
+
+		emc-timings-1 {
+			/* Hynix 1GB 667MHZ */
+			nvidia,ram-code = <1>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emem-configuration = < 0x00030003 0xc0000020
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0502 0x74830303 0x001f0000 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emem-configuration = < 0x00010003 0xc0000020
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0502 0x73430303 0x001f0000 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = < 0x00000003 0xc0000030
+					0x00000001 0x00000001 0x00000003 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0503 0x72830504 0x001f0000 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = < 0x00000006 0xc0000025
+					0x00000001 0x00000001 0x00000005 0x00000002
+					0x00000003 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0605 0x72440a06 0x001f0000 >;
+			};
+
+			timing-333500000 {
+				clock-frequency = <333500000>;
+
+				nvidia,emem-configuration = < 0x0000000a 0xc000003d
+					0x00000001 0x00000002 0x00000008 0x00000005
+					0x00000004 0x00000001 0x00000002 0x00000007
+					0x00000002 0x00000002 0x00000003 0x00000006
+					0x06030202 0x000b0608 0x70850f09 0x001f0000 >;
+			};
+
+			timing-667000000 {
+				clock-frequency = <667000000>;
+
+				nvidia,emem-configuration = < 0x00000014 0xc0000079
+					0x00000003 0x00000004 0x00000011 0x0000000b
+					0x0000000a 0x00000001 0x00000003 0x0000000b
+					0x00000002 0x00000002 0x00000004 0x00000008
+					0x08040202 0x00140b11 0x70ea1f12 0x001f0000 >;
+			};
+		};
+
+		emc-timings-2 {
+			/* Micron 1GB 667MHZ */
+			nvidia,ram-code = <2>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emem-configuration = < 0x00020001 0xc0000020
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0502 0x74830303 0x001f0000 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emem-configuration = < 0x00010001 0xc0000020
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0502 0x73430303 0x001f0000 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = < 0x00000001 0xc0000030
+					0x00000001 0x00000001 0x00000003 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0503 0x72830504 0x001f0000 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = < 0x00000003 0xc0000025
+					0x00000001 0x00000001 0x00000005 0x00000002
+					0x00000003 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0505 0x72440a06 0x001f0000 >;
+			};
+
+			timing-333500000 {
+				clock-frequency = <333500000>;
+
+				nvidia,emem-configuration = < 0x00000005 0xc000003d
+					0x00000001 0x00000002 0x00000008 0x00000004
+					0x00000004 0x00000001 0x00000002 0x00000007
+					0x00000002 0x00000002 0x00000003 0x00000006
+					0x06030202 0x000b0608 0x70850f09 0x001f0000 >;
+			};
+
+			timing-667000000 {
+				clock-frequency = <667000000>;
+
+				nvidia,emem-configuration = < 0x0000000a 0xc0000079
+					0x00000003 0x00000004 0x00000010 0x0000000a
+					0x0000000a 0x00000001 0x00000003 0x0000000b
+					0x00000002 0x00000002 0x00000004 0x00000008
+					0x08040202 0x00140b10 0x70ea1f11 0x001f0000 >;
+			};
+		};
+	};
+
+	memory-controller@7000f400 {
+		emc-timings-0 {
+			/* Elpida 1GB 667MHZ */
+			nvidia,ram-code = <0>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000001
+					0x00000004 0x00000000 0x00000000 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000000
+					0x00000000 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x00000009
+					0x0000000b 0x000000c0 0x00000000 0x00000030
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000005 0x00000005
+					0x00000004 0x00000001 0x00000000 0x00000004
+					0x00000005 0x000000c7 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000287 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000002
+					0x00000008 0x00000001 0x00000000 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000000
+					0x00000000 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x00000009
+					0x0000000b 0x00000181 0x00000000 0x00000060
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000009 0x00000009
+					0x00000004 0x00000002 0x00000000 0x00000004
+					0x00000005 0x0000018e 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x8000040b 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000004
+					0x00000010 0x00000003 0x00000001 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000001
+					0x00000001 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x00000009
+					0x0000000b 0x00000303 0x00000000 0x000000c0
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000012 0x00000012
+					0x00000004 0x00000004 0x00000000 0x00000004
+					0x00000005 0x0000031c 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000713 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x0000000a
+					0x00000020 0x00000007 0x00000002 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000002
+					0x00000002 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x00000009
+					0x0000000b 0x00000607 0x00000000 0x00000181
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000023 0x00000023
+					0x00000004 0x00000007 0x00000000 0x00000004
+					0x00000005 0x00000638 0x00000006 0x00000006
+					0x00000000 0x00000000 0x00004288 0x004400a4
+					0x00008000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00020000
+					0x00000100 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000d22 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-333500000 {
+				clock-frequency = <333500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200000>;
+				nvidia,emc-mode-reset = <0x80000321>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+
+				nvidia,emc-configuration =  < 0x0000000f
+					0x00000034 0x0000000a 0x00000003 0x00000003
+					0x00000008 0x00000002 0x00000009 0x00000003
+					0x00000003 0x00000002 0x00000001 0x00000000
+					0x00000004 0x00000006 0x00000004 0x0000000a
+					0x0000000c 0x000009e9 0x00000000 0x0000027a
+					0x00000001 0x00000008 0x00000001 0x00000000
+					0x00000007 0x0000000e 0x00000039 0x00000200
+					0x00000004 0x0000000a 0x00000000 0x00000004
+					0x00000005 0x00000a2a 0x00000000 0x00000004
+					0x00000000 0x00000000 0x00007088 0x002600a4
+					0x00008000 0x0003c000 0x0003c000 0x0003c000
+					0x0003c000 0x00014000 0x00014000 0x00014000
+					0x00014000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00048000 0x00048000 0x00048000
+					0x00048000 0x000002a0 0x0800013d 0x00000000
+					0x77fff884 0x01f1f508 0x05057404 0x54000007
+					0x080001e8 0x08000021 0x00000802 0x00020000
+					0x00000100 0x018b000c 0xa0f10000 0x00000000
+					0x00000000 0x800014d4 0xe8000000 0xff00ff89 >;
+			};
+
+			timing-667000000 {
+				clock-frequency = <667000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200018>;
+				nvidia,emc-mode-reset = <0x80000b71>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x0000001f
+					0x00000069 0x00000017 0x00000007 0x00000005
+					0x0000000c 0x00000003 0x00000011 0x00000007
+					0x00000007 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000a 0x00000009 0x0000000a
+					0x00000011 0x00001412 0x00000000 0x00000504
+					0x00000002 0x0000000e 0x00000001 0x00000000
+					0x0000000c 0x00000016 0x00000072 0x00000200
+					0x00000005 0x00000015 0x00000000 0x00000006
+					0x00000007 0x00001453 0x0000000b 0x00000006
+					0x00000000 0x00000000 0x00005088 0xf00b0191
+					0x00008000 0x00000008 0x00000008 0x00000008
+					0x00000008 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x000002a0 0x0800013d 0x22220000
+					0x77fff884 0x01f1f501 0x07077404 0x54000000
+					0x080001e8 0x0f000021 0x00000802 0x00020000
+					0x00000100 0x0156000c 0xa0f10000 0x00000000
+					0x00000000 0x800028a5 0xe8000000 0xff00ff49 >;
+			};
+		};
+
+		emc-timings-1 {
+			/* Hynix 1GB 667MHZ */
+			nvidia,ram-code = <1>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000001
+					0x00000004 0x00000000 0x00000000 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000000
+					0x00000000 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x00000009
+					0x0000000b 0x000000c0 0x00000000 0x00000030
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000005 0x00000005
+					0x00000004 0x00000001 0x00000000 0x00000004
+					0x00000005 0x000000c7 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000287 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000002
+					0x00000008 0x00000001 0x00000000 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000000
+					0x00000000 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x00000009
+					0x0000000b 0x00000181 0x00000000 0x00000060
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000009 0x00000009
+					0x00000004 0x00000002 0x00000000 0x00000004
+					0x00000005 0x0000018e 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x8000040b 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000005
+					0x00000010 0x00000003 0x00000001 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000001
+					0x00000001 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x00000009
+					0x0000000b 0x00000303 0x00000000 0x000000c0
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000012 0x00000012
+					0x00000004 0x00000004 0x00000000 0x00000004
+					0x00000005 0x0000031c 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000713 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x0000000a
+					0x00000020 0x00000007 0x00000003 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000002
+					0x00000002 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x00000009
+					0x0000000b 0x00000607 0x00000000 0x00000181
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000023 0x00000023
+					0x00000004 0x00000007 0x00000000 0x00000004
+					0x00000005 0x00000638 0x00000006 0x00000006
+					0x00000000 0x00000000 0x00004288 0x004400a4
+					0x00008000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00020000
+					0x00000100 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000d22 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-333500000 {
+				clock-frequency = <333500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200000>;
+				nvidia,emc-mode-reset = <0x80000321>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+
+				nvidia,emc-configuration =  < 0x0000000f
+					0x00000034 0x0000000b 0x00000003 0x00000003
+					0x00000008 0x00000002 0x00000009 0x00000003
+					0x00000003 0x00000002 0x00000001 0x00000000
+					0x00000004 0x00000006 0x00000004 0x0000000a
+					0x0000000c 0x000009e9 0x00000000 0x0000027a
+					0x00000001 0x00000008 0x00000001 0x00000000
+					0x00000007 0x0000000e 0x00000039 0x00000200
+					0x00000004 0x0000000a 0x00000000 0x00000004
+					0x00000005 0x00000a2a 0x00000000 0x00000004
+					0x00000000 0x00000000 0x00007088 0x002600a4
+					0x00008000 0x0003c000 0x0003c000 0x0003c000
+					0x0003c000 0x00014000 0x00014000 0x00014000
+					0x00014000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00048000 0x00048000 0x00048000
+					0x00048000 0x000002a0 0x0800013d 0x00000000
+					0x77fff884 0x01f1f508 0x05057404 0x54000007
+					0x080001e8 0x08000021 0x00000802 0x00020000
+					0x00000100 0x018b000c 0xa0f10000 0x00000000
+					0x00000000 0x800014d4 0xe8000000 0xff00ff89 >;
+			};
+
+			timing-667000000 {
+				clock-frequency = <667000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200018>;
+				nvidia,emc-mode-reset = <0x80000b71>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000020
+					0x0000006a 0x00000018 0x00000008 0x00000005
+					0x0000000c 0x00000003 0x00000011 0x00000007
+					0x00000007 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000a 0x00000009 0x0000000a
+					0x00000011 0x00001412 0x00000000 0x00000504
+					0x00000002 0x0000000e 0x00000001 0x00000000
+					0x0000000c 0x00000016 0x00000072 0x00000200
+					0x00000005 0x00000015 0x00000000 0x00000006
+					0x00000007 0x00001453 0x0000000b 0x00000006
+					0x00000000 0x00000000 0x00005088 0xf00b0191
+					0x00008000 0x00000008 0x00000008 0x00000008
+					0x00000008 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x0000000c 0x0000000c 0x0000000c
+					0x0000000c 0x000002a0 0x0800013d 0x22220000
+					0x77fff884 0x01f1f501 0x07077404 0x54000000
+					0x080001e8 0x08000021 0x00000802 0x00020000
+					0x00000100 0x0155000c 0xa0f10000 0x00000000
+					0x00000000 0x800028a5 0xe8000000 0xff00ff49 >;
+			};
+		};
+
+		emc-timings-2 {
+			/* Micron 1GB 667MHZ */
+			nvidia,ram-code = <2>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200048>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000001
+					0x00000004 0x00000000 0x00000000 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000000
+					0x00000000 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x00000009
+					0x0000000b 0x000000c0 0x00000000 0x00000030
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000005 0x00000005
+					0x00000004 0x00000001 0x00000000 0x00000004
+					0x00000005 0x000000c7 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000287 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000002
+					0x00000008 0x00000001 0x00000000 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000000
+					0x00000000 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x00000009
+					0x0000000b 0x00000181 0x00000000 0x00000060
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000009 0x00000009
+					0x00000004 0x00000002 0x00000000 0x00000004
+					0x00000005 0x0000018e 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x8000040b 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200048>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000004
+					0x00000010 0x00000003 0x00000001 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000001
+					0x00000001 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x00000303 0x00000000 0x000000c0
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000012 0x00000012
+					0x00000004 0x00000004 0x00000000 0x00000004
+					0x00000005 0x0000031c 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000713 0xd8000000 0xff00ff00 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200048>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000009
+					0x00000020 0x00000007 0x00000002 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000002
+					0x00000002 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x00000607 0x00000000 0x00000181
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000023 0x00000023
+					0x00000004 0x00000007 0x00000000 0x00000004
+					0x00000005 0x00000638 0x00000006 0x00000006
+					0x00000000 0x00000000 0x00004288 0x004400a4
+					0x00008000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00020000
+					0x00000100 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000d22 0xd8000000 0xff00ff00 >;
+			};
+
+			timing-333500000 {
+				clock-frequency = <333500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200040>;
+				nvidia,emc-mode-reset = <0x80000321>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+
+				nvidia,emc-configuration =  < 0x0000000f
+					0x00000034 0x0000000a 0x00000003 0x00000003
+					0x00000008 0x00000002 0x00000009 0x00000003
+					0x00000003 0x00000002 0x00000001 0x00000000
+					0x00000004 0x00000006 0x00000004 0x0000000a
+					0x0000000c 0x000009e9 0x00000000 0x0000027a
+					0x00000001 0x00000008 0x00000001 0x00000000
+					0x00000007 0x0000000e 0x00000039 0x00000200
+					0x00000004 0x0000000a 0x00000000 0x00000004
+					0x00000005 0x00000a2a 0x00000000 0x00000004
+					0x00000000 0x00000000 0x00007088 0x002600a4
+					0x00008000 0x0003c000 0x0003c000 0x0003c000
+					0x0003c000 0x00014000 0x00014000 0x00014000
+					0x00014000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00048000 0x00048000 0x00048000
+					0x00048000 0x000002a0 0x0800013d 0x00000000
+					0x77fff884 0x01f1f508 0x05057404 0x54000007
+					0x080001e8 0x08000021 0x00000802 0x00020000
+					0x00000100 0x018b000c 0xa0f10000 0x00000000
+					0x00000000 0x800014d4 0xe8000000 0xff00ff89 >;
+			};
+
+			timing-667000000 {
+				clock-frequency = <667000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200058>;
+				nvidia,emc-mode-reset = <0x80000b71>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x0000001f
+					0x00000069 0x00000016 0x00000007 0x00000005
+					0x0000000c 0x00000003 0x00000011 0x00000008
+					0x00000008 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000a 0x00000009 0x0000000b
+					0x00000011 0x00001412 0x00000000 0x00000504
+					0x00000002 0x0000000e 0x00000001 0x00000000
+					0x0000000c 0x00000016 0x00000072 0x00000200
+					0x00000005 0x00000015 0x00000000 0x00000006
+					0x00000007 0x00001453 0x0000000b 0x00000006
+					0x00000000 0x00000000 0x00005088 0xf00b0191
+					0x00008000 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x0000000c 0x0000000c 0x0000000c
+					0x0000000c 0x000002a0 0x0800013d 0x22220000
+					0x77fff884 0x01f1f501 0x07077404 0x54000000
+					0x080001e8 0x08000021 0x00000802 0x00020000
+					0x00000100 0x0156000c 0xa0f10000 0x00000000
+					0x00000000 0x800028a5 0xf8000000 0xff00ff49 >;
+			};
+		};
+	};
+
+	display-panel {
+		compatible = "innolux,g101ice-l01";
+	};
+
+	sound {
+		compatible = "asus,tegra-audio-wm8903-tf300t",
+			     "nvidia,tegra-audio-wm8903";
+		nvidia,model = "Asus Transformer Pad TF300T WM8903";
+
+		nvidia,audio-routing =
+			"Headphone Jack", "HPOUTR",
+			"Headphone Jack", "HPOUTL",
+			"Int Spk", "ROP",
+			"Int Spk", "RON",
+			"Int Spk", "LOP",
+			"Int Spk", "LON",
+			"IN1L", "Mic Jack",
+			"IN2L", "Mic Jack",
+			"DMICDAT", "Int Mic";
+
+		nvidia,audio-codec = <&wm8903>;
+		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
+		nvidia,headset;
+	};
+};
+
+&emc_icc_dvfs_opp_table {
+	/delete-node/ opp-750000000-1300;
+	/delete-node/ opp-800000000-1300;
+	/delete-node/ opp-900000000-1350;
+};
+
+&emc_bw_dfs_opp_table {
+	/delete-node/ opp-750000000;
+	/delete-node/ opp-800000000;
+	/delete-node/ opp-900000000;
+};
diff --git a/dts/src/arm/tegra30-asus-tf300tg.dts b/dts/src/arm/tegra30-asus-tf300tg.dts
new file mode 100644
index 0000000000..96345f821c
--- /dev/null
+++ b/dts/src/arm/tegra30-asus-tf300tg.dts
@@ -0,0 +1,1087 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra30-asus-transformer-common.dtsi"
+#include "tegra30-asus-lvds-display.dtsi"
+
+/ {
+	model = "Asus Transformer Pad 3G TF300TG";
+	compatible = "asus,tf300tg", "nvidia,tegra30";
+
+	gpio@6000d000 {
+		tf300tg-init-hog {
+			gpio-hog;
+			gpios = <TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(D, 2) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(P, 1) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(X, 5) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(W, 3) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(R, 3) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(U, 5) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(X, 7) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(X, 0) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(Y, 2) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(Y, 3) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(EE, 1) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(R, 7) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(U, 3) GPIO_ACTIVE_HIGH>;
+			output-low;
+		};
+	};
+
+	pinmux@70000868 {
+		state_default: pinmux {
+			pbb3 {
+				nvidia,pins = "pbb3";
+				nvidia,function = "vgp3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pbb7 {
+				nvidia,pins = "pbb7";
+				nvidia,function = "i2s4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi_cs4_n_pk2 {
+				nvidia,pins = "gmi_cs4_n_pk2";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			lcd_pwr2_pc6 {
+				nvidia,pins = "lcd_pwr2_pc6",
+						"lcd_dc1_pd2";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			kb_row7_pr7 {
+				nvidia,pins = "kb_row7_pr7";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			spi2_cs2_n_pw3 {
+				nvidia,pins = "spi2_cs2_n_pw3";
+				nvidia,function = "spi2";
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			dap3_din_pp1 {
+				nvidia,pins = "dap3_din_pp1";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			spi1_sck_px5 {
+				nvidia,pins = "spi1_sck_px5";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pu5 {
+				nvidia,pins = "pu5";
+				nvidia,function = "pwm2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			spi2_mosi_px0 {
+				nvidia,pins = "spi2_mosi_px0";
+				nvidia,function = "spi2";
+			};
+
+			spi1_miso_px7 {
+				nvidia,pins = "spi1_miso_px7";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			clk3_req_pee1 {
+				nvidia,pins = "clk3_req_pee1";
+				nvidia,function = "dev3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			ulpi_nxt_py2 {
+				nvidia,pins = "ulpi_nxt_py2";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			ulpi_stp_py3 {
+				nvidia,pins = "ulpi_stp_py3";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pu3 {
+				nvidia,pins = "pu3";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			dap1_din_pn1 {
+				nvidia,pins = "dap1_din_pn1";
+				nvidia,function = "i2s0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+		};
+	};
+
+	serial@70006200 {
+		/* Azurewave AW-NH615 BCM4329B1 */
+		bluetooth {
+			compatible = "brcm,bcm4329-bt";
+		};
+	};
+
+	i2c@7000c400 {
+		/* Elantech EKTH1036 touchscreen */
+		touchscreen@10 {
+			compatible = "elan,ektf3624";
+			reg = <0x10>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(H, 4) IRQ_TYPE_EDGE_FALLING>;
+			reset-gpios = <&gpio TEGRA_GPIO(H, 6) GPIO_ACTIVE_LOW>;
+
+			vcc33-supply = <&vdd_3v3_sys>;
+			vccio-supply = <&vdd_3v3_sys>;
+
+			touchscreen-size-x = <2240>;
+			touchscreen-size-y = <1408>;
+			touchscreen-inverted-y;
+		};
+	};
+
+	i2c@7000c500 {
+		clock-frequency = <400000>;
+
+		magnetometer@e {
+			mount-matrix =   "1",  "0",  "0",
+					 "0", "-1",  "0",
+					 "0",  "0", "-1";
+		};
+
+		gyroscope@68 {
+			mount-matrix =   "-1",  "0",  "0",
+					  "0",  "1",  "0",
+					  "0",  "0", "-1";
+
+			/* External I2C interface */
+			i2c-gate {
+				accelerometer@f {
+					mount-matrix =   "0", "-1",  "0",
+							"-1",  "0",  "0",
+							 "0",  "0",  "1";
+				};
+			};
+		};
+	};
+
+	i2c@7000d000 {
+		/* Realtek ALC5631 audio codec */
+		rt5631: audio-codec@1a {
+			compatible = "realtek,rt5631";
+			reg = <0x1a>;
+		};
+	};
+
+	memory-controller@7000f000 {
+		emc-timings-0 {
+			/* Elpida 1GB 667MHZ */
+			nvidia,ram-code = <0>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emem-configuration = < 0x00020001 0xc0000020
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0502 0x74830303 0x001f0000 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emem-configuration = < 0x00010001 0xc0000020
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0502 0x73430303 0x001f0000 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = < 0x00000001 0xc0000030
+					0x00000001 0x00000001 0x00000003 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0503 0x72830504 0x001f0000 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = < 0x00000003 0xc0000025
+					0x00000001 0x00000001 0x00000005 0x00000002
+					0x00000003 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0505 0x72440a06 0x001f0000 >;
+			};
+
+			timing-333500000 {
+				clock-frequency = <333500000>;
+
+				nvidia,emem-configuration = < 0x00000005 0xc000003d
+					0x00000001 0x00000002 0x00000008 0x00000004
+					0x00000004 0x00000001 0x00000002 0x00000007
+					0x00000002 0x00000002 0x00000003 0x00000006
+					0x06030202 0x000b0608 0x70850f09 0x001f0000 >;
+			};
+
+			timing-667000000 {
+				clock-frequency = <667000000>;
+
+				nvidia,emem-configuration = < 0x0000000a 0xc0000079
+					0x00000003 0x00000004 0x00000010 0x0000000b
+					0x0000000a 0x00000001 0x00000003 0x0000000b
+					0x00000002 0x00000002 0x00000004 0x00000008
+					0x08040202 0x00130b10 0x70ea1f11 0x001f0000 >;
+			};
+		};
+
+		emc-timings-1 {
+			/* Hynix 1GB 667MHZ */
+			nvidia,ram-code = <1>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emem-configuration = < 0x00020001 0xc0000020
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0502 0x74830303 0x001f0000 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emem-configuration = < 0x00010001 0xc0000020
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0502 0x73430303 0x001f0000 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = < 0x00000001 0xc0000030
+					0x00000001 0x00000001 0x00000003 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0503 0x72830504 0x001f0000 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = < 0x00000003 0xc0000025
+					0x00000001 0x00000001 0x00000005 0x00000002
+					0x00000003 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0505 0x72440a06 0x001f0000 >;
+			};
+
+			timing-333500000 {
+				clock-frequency = <333500000>;
+
+				nvidia,emem-configuration = < 0x00000005 0xc000003d
+					0x00000001 0x00000002 0x00000008 0x00000004
+					0x00000004 0x00000001 0x00000002 0x00000007
+					0x00000002 0x00000002 0x00000003 0x00000006
+					0x06030202 0x000b0608 0x70850f09 0x001f0000 >;
+			};
+
+			timing-667000000 {
+				clock-frequency = <667000000>;
+
+				nvidia,emem-configuration = < 0x0000000a 0xc0000079
+					0x00000003 0x00000004 0x00000010 0x0000000b
+					0x0000000a 0x00000001 0x00000003 0x0000000b
+					0x00000002 0x00000002 0x00000004 0x00000008
+					0x08040202 0x00130b10 0x70ea1f11 0x001f0000 >;
+			};
+		};
+
+		emc-timings-2 {
+			/* Micron 1GB 667MHZ */
+			nvidia,ram-code = <2>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emem-configuration = < 0x00020001 0xc0000020
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0502 0x74830303 0x001f0000 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emem-configuration = < 0x00010001 0xc0000020
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0502 0x73430303 0x001f0000 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = < 0x00000001 0xc0000030
+					0x00000001 0x00000001 0x00000003 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0503 0x72830504 0x001f0000 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = < 0x00000003 0xc0000025
+					0x00000001 0x00000001 0x00000005 0x00000002
+					0x00000003 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0505 0x72440a06 0x001f0000 >;
+			};
+
+			timing-333500000 {
+				clock-frequency = <333500000>;
+
+				nvidia,emem-configuration = < 0x00000005 0x8000003d
+					0x00000001 0x00000002 0x00000008 0x00000004
+					0x00000004 0x00000001 0x00000002 0x00000007
+					0x00000002 0x00000002 0x00000003 0x00000006
+					0x06030202 0x000b0608 0x70850f09 0x001f0000 >;
+			};
+
+			timing-667000000 {
+				clock-frequency = <667000000>;
+
+				nvidia,emem-configuration = < 0x0000000a 0x80000079
+					0x00000003 0x00000004 0x00000010 0x0000000a
+					0x0000000a 0x00000001 0x00000003 0x0000000b
+					0x00000002 0x00000002 0x00000004 0x00000008
+					0x08040202 0x00130b10 0x70ea1f11 0x001f0000 >;
+			};
+		};
+	};
+
+	memory-controller@7000f400 {
+		emc-timings-0 {
+			/* Elpida 1GB 667MHZ */
+			nvidia,ram-code = <0>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200048>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000001
+					0x00000004 0x00000000 0x00000000 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000000
+					0x00000000 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x000000c0 0x00000000 0x00000030
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000005 0x00000005
+					0x00000004 0x00000001 0x00000000 0x00000004
+					0x00000005 0x000000c7 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000287 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200048>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000002
+					0x00000008 0x00000001 0x00000000 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000000
+					0x00000000 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x00000181 0x00000000 0x00000060
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000009 0x00000009
+					0x00000004 0x00000002 0x00000000 0x00000004
+					0x00000005 0x0000018e 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x8000040b 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200048>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000005
+					0x00000010 0x00000003 0x00000001 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000001
+					0x00000001 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x00000303 0x00000000 0x000000c0
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000012 0x00000012
+					0x00000004 0x00000004 0x00000000 0x00000004
+					0x00000005 0x0000031c 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000713 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200048>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x0000000a
+					0x00000020 0x00000007 0x00000002 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000002
+					0x00000002 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000006 0x00000004 0x0000000a
+					0x0000000b 0x00000607 0x00000000 0x00000181
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000023 0x00000023
+					0x00000004 0x00000007 0x00000000 0x00000004
+					0x00000005 0x00000638 0x00000007 0x00000004
+					0x00000000 0x00000000 0x00004288 0x004400a4
+					0x00008000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00020000
+					0x00000100 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000d22 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-333500000 {
+				clock-frequency = <333500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200040>;
+				nvidia,emc-mode-reset = <0x80000321>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+
+				nvidia,emc-configuration =  < 0x0000000f
+					0x00000034 0x0000000a 0x00000003 0x00000003
+					0x00000008 0x00000002 0x00000009 0x00000003
+					0x00000003 0x00000002 0x00000001 0x00000000
+					0x00000004 0x00000006 0x00000004 0x0000000a
+					0x0000000c 0x000009e9 0x00000000 0x0000027a
+					0x00000001 0x00000008 0x00000001 0x00000000
+					0x00000007 0x0000000e 0x00000039 0x00000200
+					0x00000004 0x0000000a 0x00000000 0x00000004
+					0x00000005 0x00000a2a 0x00000000 0x00000004
+					0x00000000 0x00000000 0x00007088 0x002600a4
+					0x00008000 0x0003c000 0x0003c000 0x0003c000
+					0x0003c000 0x00014000 0x00014000 0x00014000
+					0x00014000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00050000 0x00050000 0x00050000
+					0x00050000 0x000002a0 0x0800013d 0x00000000
+					0x77fff884 0x01f1f508 0x05057404 0x54000007
+					0x080001e8 0x08000021 0x00000802 0x00020000
+					0x00000100 0x018b000c 0xa0f10000 0x00000000
+					0x00000000 0x800014d4 0xe8000000 0xff00ff89 >;
+			};
+
+			timing-667000000 {
+				clock-frequency = <667000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200058>;
+				nvidia,emc-mode-reset = <0x80000b71>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x0000001f
+					0x00000069 0x00000017 0x00000007 0x00000005
+					0x0000000c 0x00000003 0x00000011 0x00000007
+					0x00000007 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000b 0x00000009 0x0000000b
+					0x00000011 0x00001412 0x00000000 0x00000504
+					0x00000002 0x0000000e 0x00000001 0x00000000
+					0x0000000c 0x00000016 0x00000072 0x00000200
+					0x00000005 0x00000015 0x00000000 0x00000006
+					0x00000007 0x00001453 0x0000000c 0x00000004
+					0x00000000 0x00000000 0x00005088 0xf00b0191
+					0x00008000 0x0000000c 0x0000000c 0x0000000c
+					0x0000000c 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x00018000 0x00018000 0x00018000
+					0x00018000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x0000000c 0x0000000c 0x0000000c
+					0x0000000c 0x000002a0 0x0a00013d 0x22220000
+					0x77fff884 0x01f1f501 0x07077404 0x54000000
+					0x080001e8 0x0a000021 0x00000802 0x00020000
+					0x00000100 0x0156000c 0xa0f10000 0x00000000
+					0x00000000 0x800028a5 0xe8000000 0xff00ff49 >;
+			};
+		};
+
+		emc-timings-1 {
+			/* Hynix 1GB 667MHZ */
+			nvidia,ram-code = <1>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200048>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000001
+					0x00000004 0x00000000 0x00000000 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000000
+					0x00000000 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x000000c0 0x00000000 0x00000030
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000005 0x00000005
+					0x00000004 0x00000001 0x00000000 0x00000004
+					0x00000005 0x000000c7 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000287 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200048>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000002
+					0x00000008 0x00000001 0x00000000 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000000
+					0x00000000 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x00000181 0x00000000 0x00000060
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000009 0x00000009
+					0x00000004 0x00000002 0x00000000 0x00000004
+					0x00000005 0x0000018e 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x8000040b 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200048>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000005
+					0x00000010 0x00000003 0x00000001 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000001
+					0x00000001 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x00000303 0x00000000 0x000000c0
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000012 0x00000012
+					0x00000004 0x00000004 0x00000000 0x00000004
+					0x00000005 0x0000031c 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000713 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200048>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x0000000a
+					0x00000020 0x00000007 0x00000002 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000002
+					0x00000002 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000006 0x00000004 0x0000000a
+					0x0000000b 0x00000607 0x00000000 0x00000181
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000023 0x00000023
+					0x00000004 0x00000007 0x00000000 0x00000004
+					0x00000005 0x00000638 0x00000007 0x00000004
+					0x00000000 0x00000000 0x00004288 0x004400a4
+					0x00008000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00020000
+					0x00000100 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000d22 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-333500000 {
+				clock-frequency = <333500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200040>;
+				nvidia,emc-mode-reset = <0x80000321>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+
+				nvidia,emc-configuration =  < 0x0000000f
+					0x00000034 0x0000000a 0x00000003 0x00000003
+					0x00000008 0x00000002 0x00000009 0x00000003
+					0x00000003 0x00000002 0x00000001 0x00000000
+					0x00000004 0x00000006 0x00000004 0x0000000a
+					0x0000000c 0x000009e9 0x00000000 0x0000027a
+					0x00000001 0x00000008 0x00000001 0x00000000
+					0x00000007 0x0000000e 0x00000039 0x00000200
+					0x00000004 0x0000000a 0x00000000 0x00000004
+					0x00000005 0x00000a2a 0x00000000 0x00000004
+					0x00000000 0x00000000 0x00007088 0x002600a4
+					0x00008000 0x0003c000 0x0003c000 0x0003c000
+					0x0003c000 0x00014000 0x00014000 0x00014000
+					0x00014000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00048000 0x00048000 0x00048000
+					0x00048000 0x000002a0 0x0800013d 0x00000000
+					0x77fff884 0x01f1f508 0x05057404 0x54000007
+					0x080001e8 0x08000021 0x00000802 0x00020000
+					0x00000100 0x018b000c 0xa0f10000 0x00000000
+					0x00000000 0x800014d4 0xe8000000 0xff00ff89 >;
+			};
+
+			timing-667000000 {
+				clock-frequency = <667000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200058>;
+				nvidia,emc-mode-reset = <0x80000b71>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000020
+					0x00000069 0x00000017 0x00000007 0x00000005
+					0x0000000c 0x00000003 0x00000011 0x00000007
+					0x00000007 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000b 0x00000009 0x0000000b
+					0x00000011 0x00001412 0x00000000 0x00000504
+					0x00000002 0x0000000e 0x00000001 0x00000000
+					0x0000000c 0x00000016 0x00000072 0x00000200
+					0x00000005 0x00000015 0x00000000 0x00000006
+					0x00000007 0x00001453 0x0000000c 0x00000004
+					0x00000000 0x00000000 0x00005088 0xf00b0191
+					0x00008000 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x00018000 0x00018000 0x00018000
+					0x00018000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x000002a0 0x0800013d 0x22220000
+					0x77fff884 0x01f1f501 0x07077404 0x54000000
+					0x080001e8 0x08000021 0x00000802 0x00020000
+					0x00000100 0x0156000c 0xa0f10000 0x00000000
+					0x00000000 0x800028a5 0xe8000000 0xff00ff49 >;
+			};
+		};
+
+		emc-timings-2 {
+			/* Micron 1GB 667MHZ */
+			nvidia,ram-code = <2>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000001
+					0x00000004 0x00000000 0x00000000 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000000
+					0x00000000 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x000000c0 0x00000000 0x00000030
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000005 0x00000005
+					0x00000004 0x00000001 0x00000000 0x00000004
+					0x00000005 0x000000c7 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000287 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000002
+					0x00000008 0x00000001 0x00000000 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000000
+					0x00000000 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x00000181 0x00000000 0x00000060
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000009 0x00000009
+					0x00000004 0x00000002 0x00000000 0x00000004
+					0x00000005 0x0000018e 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x8000040b 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000004
+					0x00000010 0x00000003 0x00000001 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000001
+					0x00000001 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x00000303 0x00000000 0x000000c0
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000012 0x00000012
+					0x00000004 0x00000004 0x00000000 0x00000004
+					0x00000005 0x0000031c 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000713 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000009
+					0x00000020 0x00000007 0x00000002 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000002
+					0x00000002 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000006 0x00000004 0x0000000a
+					0x0000000b 0x00000607 0x00000000 0x00000181
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000023 0x00000023
+					0x00000004 0x00000007 0x00000000 0x00000004
+					0x00000005 0x00000638 0x00000007 0x00000004
+					0x00000000 0x00000000 0x00004288 0x004400a4
+					0x00008000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00020000
+					0x00000100 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000d22 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-333500000 {
+				clock-frequency = <333500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200000>;
+				nvidia,emc-mode-reset = <0x80000321>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+
+				nvidia,emc-configuration =  < 0x0000000f
+					0x00000034 0x0000000a 0x00000003 0x00000003
+					0x00000008 0x00000002 0x00000009 0x00000003
+					0x00000003 0x00000002 0x00000001 0x00000000
+					0x00000004 0x00000006 0x00000004 0x0000000a
+					0x0000000c 0x000009e9 0x00000000 0x0000027a
+					0x00000001 0x00000008 0x00000001 0x00000000
+					0x00000007 0x0000000e 0x00000039 0x00000200
+					0x00000004 0x0000000a 0x00000000 0x00000004
+					0x00000005 0x00000a2a 0x00000000 0x00000004
+					0x00000000 0x00000000 0x00007088 0x002600a4
+					0x00008000 0x0003c000 0x0003c000 0x0003c000
+					0x0003c000 0x00014000 0x00014000 0x00014000
+					0x00014000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00040000 0x00040000 0x00040000
+					0x00040000 0x000002a0 0x0800013d 0x00000000
+					0x77fff884 0x01f1f508 0x05057404 0x54000007
+					0x080001e8 0x08000021 0x00000802 0x00020000
+					0x00000100 0x018b000c 0xa0f10000 0x00000000
+					0x00000000 0x800014d4 0xe8000000 0xff00ff89 >;
+			};
+
+			timing-667000000 {
+				clock-frequency = <667000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200018>;
+				nvidia,emc-mode-reset = <0x80000b71>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x0000001f
+					0x00000069 0x00000016 0x00000007 0x00000005
+					0x0000000c 0x00000003 0x00000011 0x00000007
+					0x00000007 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000b 0x00000009 0x0000000b
+					0x00000011 0x00001412 0x00000000 0x00000504
+					0x00000002 0x0000000e 0x00000001 0x00000000
+					0x0000000c 0x00000016 0x00000072 0x00000200
+					0x00000005 0x00000015 0x00000000 0x00000006
+					0x00000007 0x00001453 0x0000000c 0x00000004
+					0x00000000 0x00000000 0x00005088 0xf00b0191
+					0x00008000 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x000002a0 0x0600013d 0x22220000
+					0x77fff884 0x01f1f501 0x07077404 0x54000000
+					0x080001e8 0x08000021 0x00000802 0x00020000
+					0x00000100 0x0156000c 0xa0f10000 0x00000000
+					0x00000000 0x800028a5 0xe8000000 0xff00ff49 >;
+			};
+		};
+	};
+
+	display-panel {
+		compatible = "innolux,g101ice-l01";
+	};
+};
+
+&emc_icc_dvfs_opp_table {
+	/delete-node/ opp-750000000-1300;
+	/delete-node/ opp-800000000-1300;
+	/delete-node/ opp-900000000-1350;
+};
+
+&emc_bw_dfs_opp_table {
+	/delete-node/ opp-750000000;
+	/delete-node/ opp-800000000;
+	/delete-node/ opp-900000000;
+};
diff --git a/dts/src/arm/tegra30-asus-tf700t.dts b/dts/src/arm/tegra30-asus-tf700t.dts
new file mode 100644
index 0000000000..18a9bfa5e9
--- /dev/null
+++ b/dts/src/arm/tegra30-asus-tf700t.dts
@@ -0,0 +1,823 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra30-asus-transformer-common.dtsi"
+
+/ {
+	model = "Asus Transformer Infinity TF700T";
+	compatible = "asus,tf700t", "nvidia,tegra30";
+
+	host1x@50000000 {
+		lcd: dc@54200000 {
+			clocks = <&tegra_car TEGRA30_CLK_DISP1>,
+				 <&tegra_car TEGRA30_CLK_PLL_D_OUT0>;
+
+			rgb {
+				status = "okay";
+
+				port@0 {
+					dpi_output: endpoint {
+						remote-endpoint = <&bridge_input>;
+						bus-width = <24>;
+					};
+				};
+			};
+		};
+	};
+
+	pinmux@70000868 {
+		state_default: pinmux {
+			lcd_pwr2_pc6 {
+				nvidia,pins = "lcd_pwr2_pc6",
+						"lcd_dc1_pd2";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pbb3 {
+				nvidia,pins = "pbb3";
+				nvidia,function = "vgp3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			spi2_mosi_px0 {
+				nvidia,pins = "spi2_mosi_px0";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pbb7 {
+				nvidia,pins = "pbb7";
+				nvidia,function = "i2s4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			kb_row7_pr7 {
+				nvidia,pins = "kb_row7_pr7";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_cs4_n_pk2 {
+				nvidia,pins = "gmi_cs4_n_pk2";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+		};
+	};
+
+	serial@70006200 {
+		/* Azurewave AW-NH665 BCM4330B1 */
+		bluetooth {
+			compatible = "brcm,bcm4330-bt";
+		};
+	};
+
+	i2c@7000c400 {
+		/* Elantech ELAN-3024-7053 or 5184N FPC-1 REV: 2/3 touchscreen */
+		touchscreen@10 {
+			compatible = "elan,ektf3624";
+			reg = <0x10>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(H, 4) IRQ_TYPE_EDGE_FALLING>;
+			reset-gpios = <&gpio TEGRA_GPIO(H, 6) GPIO_ACTIVE_LOW>;
+
+			vcc33-supply = <&vdd_3v3_sys>;
+			vccio-supply = <&vdd_3v3_sys>;
+
+			touchscreen-size-x = <2944>;
+			touchscreen-size-y = <1856>;
+			touchscreen-inverted-y;
+		};
+	};
+
+	i2c@7000c500 {
+		clock-frequency = <100000>;
+
+		magnetometer@e {
+			mount-matrix =   "1",  "0",  "0",
+					 "0", "-1",  "0",
+					 "0",  "0", "-1";
+		};
+
+		gyroscope@68 {
+			mount-matrix =   "0",  "1",  "0",
+					 "1",  "0",  "0",
+					 "0",  "0", "-1";
+
+			/* External I2C interface */
+			i2c-gate {
+				accelerometer@f {
+					mount-matrix =   "0", "-1",  "0",
+							"-1",  "0",  "0",
+							 "0",  "0",  "1";
+				};
+			};
+		};
+	};
+
+	i2c@7000d000 {
+		/* Realtek ALC5631 audio codec */
+		rt5631: audio-codec@1a {
+			compatible = "realtek,rt5631";
+			reg = <0x1a>;
+		};
+	};
+
+	memory-controller@7000f000 {
+		emc-timings-0 {
+			/* Micron 1GB 800MHZ */
+			nvidia,ram-code = <0>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emem-configuration = < 0x00020001 0xc0000020
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0502 0x75830303 0x001f0000 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emem-configuration = < 0x00010001 0xc0000020
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0502 0x74630303 0x001f0000 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = < 0x00000001 0xc0000030
+					0x00000001 0x00000001 0x00000003 0x00000000
+					0x00000002 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0503 0x73c30504 0x001f0000 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = < 0x00000003 0xc0000025
+					0x00000001 0x00000001 0x00000005 0x00000002
+					0x00000004 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0505 0x73840a06 0x001f0000 >;
+			};
+
+			timing-400000000 {
+				clock-frequency = <400000000>;
+
+				nvidia,emem-configuration = < 0x00000006 0xc0000048
+					0x00000001 0x00000002 0x00000009 0x00000005
+					0x00000007 0x00000001 0x00000002 0x00000008
+					0x00000002 0x00000002 0x00000003 0x00000006
+					0x06030202 0x000d0709 0x7086120a 0x001f0000 >;
+			};
+
+			timing-800000000 {
+				clock-frequency = <800000000>;
+
+				nvidia,emem-configuration = < 0x0000000c 0xc0000090
+					0x00000004 0x00000005 0x00000013 0x0000000c
+					0x0000000f 0x00000002 0x00000003 0x0000000c
+					0x00000002 0x00000002 0x00000004 0x00000008
+					0x08040202 0x00160d13 0x712c2414 0x001f0000 >;
+			};
+		};
+
+		emc-timings-1 {
+			/* Elpida 1GB 800MHZ */
+			nvidia,ram-code = <1>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emem-configuration = < 0x00020001 0xc0000020
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0502 0x75830303 0x001f0000 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emem-configuration = < 0x00010001 0xc0000020
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0502 0x74630303 0x001f0000 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = < 0x00000001 0xc0000030
+					0x00000001 0x00000001 0x00000003 0x00000000
+					0x00000002 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0503 0x73c30504 0x001f0000 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = < 0x00000003 0xc0000025
+					0x00000001 0x00000001 0x00000005 0x00000002
+					0x00000004 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0505 0x73840a06 0x001f0000 >;
+			};
+
+			timing-400000000 {
+				clock-frequency = <400000000>;
+
+				nvidia,emem-configuration = < 0x00000006 0xc0000048
+					0x00000001 0x00000002 0x00000009 0x00000005
+					0x00000007 0x00000001 0x00000002 0x00000008
+					0x00000002 0x00000002 0x00000003 0x00000006
+					0x06030202 0x000d0709 0x7086120a 0x001f0000 >;
+			};
+
+			timing-800000000 {
+				clock-frequency = <800000000>;
+
+				nvidia,emem-configuration = < 0x0000000c 0xc0000090
+					0x00000004 0x00000005 0x00000013 0x0000000c
+					0x0000000f 0x00000002 0x00000003 0x0000000c
+					0x00000002 0x00000002 0x00000004 0x00000008
+					0x08040202 0x00160d13 0x712c2414 0x001f0000 >;
+			};
+		};
+	};
+
+	memory-controller@7000f400 {
+		emc-timings-0 {
+			/* Micron 1GB 800MHZ */
+			nvidia,ram-code = <0>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000001
+					0x00000006 0x00000000 0x00000000 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000000
+					0x00000000 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x000000c0 0x00000000 0x00000030
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000007 0x00000007
+					0x00000004 0x00000002 0x00000000 0x00000004
+					0x00000005 0x000000c7 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000287 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000002
+					0x0000000d 0x00000001 0x00000000 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000000
+					0x00000000 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x00000181 0x00000000 0x00000060
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x0000000e 0x0000000e
+					0x00000004 0x00000003 0x00000000 0x00000004
+					0x00000005 0x0000018e 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x8000040b 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000004
+					0x0000001a 0x00000003 0x00000001 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000001
+					0x00000001 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x00000303 0x00000000 0x000000c0
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x0000001c 0x0000001c
+					0x00000004 0x00000005 0x00000000 0x00000004
+					0x00000005 0x0000031c 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000713 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000009
+					0x00000035 0x00000007 0x00000002 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000002
+					0x00000002 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000006 0x00000004 0x0000000a
+					0x0000000b 0x00000607 0x00000000 0x00000181
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000038 0x00000038
+					0x00000004 0x00000009 0x00000000 0x00000004
+					0x00000005 0x00000638 0x00000007 0x00000004
+					0x00000000 0x00000000 0x00004288 0x004400a4
+					0x00008000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00020000
+					0x00000100 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000d22 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-400000000 {
+				clock-frequency = <400000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200000>;
+				nvidia,emc-mode-reset = <0x80000521>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+
+				nvidia,emc-configuration =  < 0x00000012
+					0x00000066 0x0000000c 0x00000004 0x00000003
+					0x00000008 0x00000002 0x0000000a 0x00000004
+					0x00000004 0x00000002 0x00000001 0x00000000
+					0x00000004 0x00000006 0x00000004 0x0000000a
+					0x0000000c 0x00000bf0 0x00000000 0x000002fc
+					0x00000001 0x00000008 0x00000001 0x00000000
+					0x00000008 0x0000000f 0x0000006c 0x00000200
+					0x00000004 0x00000010 0x00000000 0x00000004
+					0x00000005 0x00000c30 0x00000000 0x00000004
+					0x00000000 0x00000000 0x00007088 0x001d0084
+					0x00008000 0x00044000 0x00044000 0x00044000
+					0x00044000 0x00014000 0x00014000 0x00014000
+					0x00014000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00048000 0x00048000 0x00048000
+					0x00048000 0x000002a0 0x0600013d 0x00000000
+					0x77fff884 0x01f1f508 0x05057404 0x54000007
+					0x080001e8 0x08000021 0x00000802 0x00020000
+					0x00000100 0x0158000c 0xa0f10000 0x00000000
+					0x00000000 0x800018c8 0xe8000000 0xff00ff89 >;
+			};
+
+			timing-800000000 {
+				clock-frequency = <800000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200018>;
+				nvidia,emc-mode-reset = <0x80000d71>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000025
+					0x000000ce 0x0000001a 0x00000009 0x00000005
+					0x0000000d 0x00000004 0x00000013 0x00000009
+					0x00000009 0x00000004 0x00000001 0x00000000
+					0x00000007 0x0000000a 0x00000009 0x0000000a
+					0x00000011 0x00001820 0x00000000 0x00000608
+					0x00000003 0x00000012 0x00000001 0x00000000
+					0x0000000f 0x00000018 0x000000d8 0x00000200
+					0x00000005 0x00000020 0x00000000 0x00000007
+					0x00000008 0x00001860 0x0000000b 0x00000006
+					0x00000000 0x00000000 0x00005088 0xf0070191
+					0x00008000 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x00018000 0x00018000 0x00018000
+					0x00018000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x000002a0 0x0800013d 0x22220000
+					0x77fff884 0x01f1f501 0x07077404 0x54000000
+					0x080001e8 0x08000021 0x00000802 0x00020000
+					0x00000100 0x00f0000c 0xa0f10000 0x00000000
+					0x00000000 0x8000308c 0xe8000000 0xff00ff49 >;
+			};
+		};
+
+		emc-timings-1 {
+			/* Elpida 1GB 800MHZ */
+			nvidia,ram-code = <1>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000001
+					0x00000006 0x00000000 0x00000000 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000000
+					0x00000000 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x000000c0 0x00000000 0x00000030
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000007 0x00000007
+					0x00000004 0x00000002 0x00000000 0x00000004
+					0x00000005 0x000000c7 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000287 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000002
+					0x0000000d 0x00000001 0x00000000 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000000
+					0x00000000 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x00000181 0x00000000 0x00000060
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x0000000e 0x0000000e
+					0x00000004 0x00000003 0x00000000 0x00000004
+					0x00000005 0x0000018e 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x8000040b 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000004
+					0x0000001a 0x00000003 0x00000001 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000001
+					0x00000001 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x00000303 0x00000000 0x000000c0
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x0000001c 0x0000001c
+					0x00000004 0x00000005 0x00000000 0x00000004
+					0x00000005 0x0000031c 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000713 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000009
+					0x00000035 0x00000007 0x00000002 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000002
+					0x00000002 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000006 0x00000004 0x0000000a
+					0x0000000b 0x00000607 0x00000000 0x00000181
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000038 0x00000038
+					0x00000004 0x00000009 0x00000000 0x00000004
+					0x00000005 0x00000638 0x00000007 0x00000004
+					0x00000000 0x00000000 0x00004288 0x004400a4
+					0x00008000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00020000
+					0x00000100 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000d22 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-400000000 {
+				clock-frequency = <400000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200000>;
+				nvidia,emc-mode-reset = <0x80000521>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+
+				nvidia,emc-configuration =  < 0x00000012
+					0x00000066 0x0000000c 0x00000004 0x00000003
+					0x00000008 0x00000002 0x0000000a 0x00000004
+					0x00000004 0x00000002 0x00000001 0x00000000
+					0x00000004 0x00000006 0x00000004 0x0000000a
+					0x0000000c 0x00000bf0 0x00000000 0x000002fc
+					0x00000001 0x00000008 0x00000001 0x00000000
+					0x00000008 0x0000000f 0x0000006c 0x00000200
+					0x00000004 0x00000010 0x00000000 0x00000004
+					0x00000005 0x00000c30 0x00000000 0x00000004
+					0x00000000 0x00000000 0x00007088 0x001d0084
+					0x00008000 0x00044000 0x00044000 0x00044000
+					0x00044000 0x00014000 0x00014000 0x00014000
+					0x00014000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00048000 0x00048000 0x00048000
+					0x00048000 0x000002a0 0x0600013d 0x00000000
+					0x77fff884 0x01f1f508 0x05057404 0x54000007
+					0x080001e8 0x08000021 0x00000802 0x00020000
+					0x00000100 0x0158000c 0xa0f10000 0x00000000
+					0x00000000 0x800018c8 0xe8000000 0xff00ff89 >;
+			};
+
+			timing-800000000 {
+				clock-frequency = <800000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200018>;
+				nvidia,emc-mode-reset = <0x80000d71>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000025
+					0x000000ce 0x0000001a 0x00000009 0x00000005
+					0x0000000d 0x00000004 0x00000013 0x00000009
+					0x00000009 0x00000004 0x00000001 0x00000000
+					0x00000007 0x0000000a 0x00000009 0x0000000a
+					0x00000011 0x00001820 0x00000000 0x00000608
+					0x00000003 0x00000012 0x00000001 0x00000000
+					0x0000000f 0x00000018 0x000000d8 0x00000200
+					0x00000005 0x00000020 0x00000000 0x00000007
+					0x00000008 0x00001860 0x0000000b 0x00000006
+					0x00000000 0x00000000 0x00005088 0xf0070191
+					0x00008000 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x00018000 0x00018000 0x00018000
+					0x00018000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x000002a0 0x0a00013d 0x22220000
+					0x77fff884 0x01f1f501 0x07077404 0x54000000
+					0x080001e8 0x08000021 0x00000802 0x00020000
+					0x00000100 0x00f0000c 0xa0f10000 0x00000000
+					0x00000000 0x8000308c 0xe8000000 0xff00ff49 >;
+			};
+		};
+	};
+
+	tc358768_refclk: clock-tc358768 {
+		compatible = "fixed-clock";
+		clock-frequency = <23100000>;
+		clock-accuracy = <100>;
+		#clock-cells = <0>;
+	};
+
+	tc358768_osc: clock-tc358768-osc-gate {
+		compatible = "gpio-gate-clock";
+		enable-gpios = <&gpio TEGRA_GPIO(D, 2) GPIO_ACTIVE_HIGH>;
+		clocks = <&tc358768_refclk>;
+		#clock-cells = <0>;
+	};
+
+	haptic-feedback {
+		compatible = "gpio-vibrator";
+		enable-gpios = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_HIGH>;
+		vcc-supply = <&vdd_3v3_sys>;
+	};
+
+	i2c-mux {
+		compatible = "i2c-mux-gpio";
+
+		mux-gpios = <&gpio TEGRA_GPIO(X, 0) GPIO_ACTIVE_HIGH>;
+		i2c-parent = <&lcd_ddc>;
+		idle-state = <0x0>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			dsi-bridge@7 {
+				compatible = "toshiba,tc358768";
+				reg = <0x7>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				clocks = <&tc358768_osc>;
+				clock-names = "refclk";
+
+				reset-gpios = <&gpio TEGRA_GPIO(N, 6) GPIO_ACTIVE_LOW>;
+
+				vddc-supply = <&vdd_1v2_mipi>;
+				vddio-supply = <&vdd_1v8_vio>;
+				vddmipi-supply = <&vdd_1v2_mipi>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						bridge_input: endpoint {
+							remote-endpoint = <&dpi_output>;
+							data-lines = <24>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						bridge_output: endpoint {
+							remote-endpoint = <&panel_input>;
+						};
+					};
+				};
+
+				/*
+				 * Panasonic VVX10F004B00 or HYDIS HV101WU1-1E1
+				 * LCD SuperIPS+ Full HD panel.
+				 */
+				panel@1 {
+					compatible = "panasonic,vvx10f004b00";
+					reg = <1>;
+
+					power-supply = <&vdd_pnl>;
+					backlight = <&backlight>;
+
+					port {
+						panel_input: endpoint {
+							remote-endpoint = <&bridge_output>;
+						};
+					};
+				};
+			};
+		};
+	};
+
+	vdd_1v2_mipi: regulator-mipi {
+		compatible = "regulator-fixed";
+		regulator-name = "tc358768_1v2_vdd";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-enable-ramp-delay = <10000>;
+		regulator-boot-on;
+		gpio = <&gpio TEGRA_GPIO(BB, 3) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_sys>;
+	};
+};
+
+&emc_icc_dvfs_opp_table {
+	/delete-node/ opp-900000000-1350;
+};
+
+&emc_bw_dfs_opp_table {
+	/delete-node/ opp-900000000;
+};
diff --git a/dts/src/arm/tegra30-asus-transformer-common.dtsi b/dts/src/arm/tegra30-asus-transformer-common.dtsi
new file mode 100644
index 0000000000..85b43a86a2
--- /dev/null
+++ b/dts/src/arm/tegra30-asus-transformer-common.dtsi
@@ -0,0 +1,1787 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/thermal/thermal.h>
+
+#include "tegra30.dtsi"
+#include "tegra30-cpu-opp.dtsi"
+#include "tegra30-cpu-opp-microvolt.dtsi"
+
+/ {
+	chassis-type = "convertible";
+
+	aliases {
+		mmc0 = "/mmc@78000600"; /* eMMC */
+		mmc1 = "/mmc@78000000"; /* uSD slot */
+		mmc2 = "/mmc@78000400"; /* WiFi */
+
+		rtc0 = &pmic;
+		rtc1 = "/rtc@7000e000";
+
+		display0 = &lcd;
+		display1 = &hdmi;
+
+		serial1 = &uartc; /* Bluetooth */
+		serial2 = &uartb; /* GPS */
+	};
+
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 */
+	chosen {};
+
+	memory@80000000 {
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		linux,cma@80000000 {
+			compatible = "shared-dma-pool";
+			alloc-ranges = <0x80000000 0x30000000>;
+			size = <0x10000000>;		/* 256MiB */
+			linux,cma-default;
+			reusable;
+		};
+
+		ramoops@beb00000 {
+			compatible = "ramoops";
+			reg = <0xbeb00000 0x10000>;	/* 64kB */
+			console-size = <0x8000>;	/* 32kB */
+			record-size = <0x400>;		/*  1kB */
+			ecc-size = <16>;
+		};
+
+		trustzone@bfe00000 {
+			reg = <0xbfe00000 0x200000>;	/* 2MB */
+			no-map;
+		};
+	};
+
+	host1x@50000000 {
+		hdmi: hdmi@54280000 {
+			status = "okay";
+
+			hdmi-supply = <&hdmi_5v0_sys>;
+			pll-supply = <&vdd_1v8_vio>;
+			vdd-supply = <&vdd_3v3_sys>;
+
+			nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+		};
+	};
+
+	gpio@6000d000 {
+		init-lpm-in-hog {
+			gpio-hog;
+			gpios = <TEGRA_GPIO(I, 6) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(B, 1) GPIO_ACTIVE_HIGH>;
+			input;
+		};
+
+		init-lpm-out-hog {
+			gpio-hog;
+			gpios = <TEGRA_GPIO(K, 7) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
+			output-low;
+		};
+
+		usb-charge-limit-hog {
+			gpio-hog;
+			gpios = <TEGRA_GPIO(R, 1) GPIO_ACTIVE_LOW>;
+			output-high;
+		};
+	};
+
+	vde@6001a000 {
+		assigned-clocks = <&tegra_car TEGRA30_CLK_VDE>;
+		assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_P>;
+		assigned-clock-rates = <408000000>;
+	};
+
+	pinmux@70000868 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			/* SDMMC1 pinmux */
+			sdmmc1_clk {
+				nvidia,pins = "sdmmc1_clk_pz0";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			sdmmc1_cmd {
+				nvidia,pins = "sdmmc1_dat3_py4",
+						"sdmmc1_dat2_py5",
+						"sdmmc1_dat1_py6",
+						"sdmmc1_dat0_py7",
+						"sdmmc1_cmd_pz1";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			sdmmc1_cd {
+				nvidia,pins = "gmi_iordy_pi5";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			sdmmc1_wp {
+				nvidia,pins = "vi_d11_pt3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* SDMMC2 pinmux */
+			vi_d1_pd5 {
+				nvidia,pins = "vi_d1_pd5",
+						"vi_d2_pl0",
+						"vi_d3_pl1",
+						"vi_d5_pl3",
+						"vi_d7_pl5";
+				nvidia,function = "sdmmc2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			vi_d8_pl6 {
+				nvidia,pins = "vi_d8_pl6",
+						"vi_d9_pl7";
+				nvidia,function = "sdmmc2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+				nvidia,ioreset = <0>;
+			};
+
+			/* SDMMC3 pinmux */
+			sdmmc3_clk {
+				nvidia,pins = "sdmmc3_clk_pa6";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			sdmmc3_cmd {
+				nvidia,pins = "sdmmc3_cmd_pa7",
+						"sdmmc3_dat0_pb7",
+						"sdmmc3_dat1_pb6",
+						"sdmmc3_dat2_pb5",
+						"sdmmc3_dat3_pb4",
+						"sdmmc3_dat4_pd1",
+						"sdmmc3_dat5_pd0",
+						"sdmmc3_dat6_pd3",
+						"sdmmc3_dat7_pd4";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* SDMMC4 pinmux */
+			sdmmc4_clk {
+				nvidia,pins = "sdmmc4_clk_pcc4";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			sdmmc4_cmd {
+				nvidia,pins = "sdmmc4_cmd_pt7",
+						"sdmmc4_dat0_paa0",
+						"sdmmc4_dat1_paa1",
+						"sdmmc4_dat2_paa2",
+						"sdmmc4_dat3_paa3",
+						"sdmmc4_dat4_paa4",
+						"sdmmc4_dat5_paa5",
+						"sdmmc4_dat6_paa6",
+						"sdmmc4_dat7_paa7";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			sdmmc4_rst_n {
+				nvidia,pins = "sdmmc4_rst_n_pcc3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			cam_mclk {
+				nvidia,pins = "cam_mclk_pcc0";
+				nvidia,function = "vi_alt3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			drive_sdmmc4 {
+				nvidia,pins = "drive_gma",
+						"drive_gmb",
+						"drive_gmc",
+						"drive_gmd";
+				nvidia,pull-down-strength = <9>;
+				nvidia,pull-up-strength = <9>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+			};
+
+			/* I2C pinmux */
+			gen1_i2c {
+				nvidia,pins = "gen1_i2c_scl_pc4",
+						"gen1_i2c_sda_pc5";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+			};
+
+			gen2_i2c {
+				nvidia,pins = "gen2_i2c_scl_pt5",
+						"gen2_i2c_sda_pt6";
+				nvidia,function = "i2c2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+			};
+
+			cam_i2c {
+				nvidia,pins = "cam_i2c_scl_pbb1",
+						"cam_i2c_sda_pbb2";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+			};
+
+			ddc_i2c {
+				nvidia,pins = "ddc_scl_pv4",
+						"ddc_sda_pv5";
+				nvidia,function = "i2c4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+			};
+
+			pwr_i2c {
+				nvidia,pins = "pwr_i2c_scl_pz6",
+						"pwr_i2c_sda_pz7";
+				nvidia,function = "i2cpwr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+			};
+
+			hotplug_i2c {
+				nvidia,pins = "pu4";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* HDMI pinmux */
+			hdmi_cec {
+				nvidia,pins = "hdmi_cec_pee3";
+				nvidia,function = "cec";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+			};
+
+			hdmi_hpd {
+				nvidia,pins = "hdmi_int_pn7";
+				nvidia,function = "hdmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* UART-A */
+			ulpi_data0_po1 {
+				nvidia,pins = "ulpi_data0_po1";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			ulpi_data1_po2 {
+				nvidia,pins = "ulpi_data1_po2";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			ulpi_data5_po6 {
+				nvidia,pins = "ulpi_data5_po6";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			ulpi_data7_po0 {
+				nvidia,pins = "ulpi_data7_po0",
+						"ulpi_data2_po3",
+						"ulpi_data3_po4",
+						"ulpi_data4_po5",
+						"ulpi_data6_po7";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* UART-B */
+			uartb_txd_rts {
+				nvidia,pins = "uart2_txd_pc2",
+						"uart2_rts_n_pj6";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			uartb_rxd_cts {
+				nvidia,pins = "uart2_rxd_pc3",
+						"uart2_cts_n_pj5";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* UART-C */
+			uartc_rxd_cts {
+				nvidia,pins = "uart3_cts_n_pa1",
+						"uart3_rxd_pw7";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			uartc_txd_rts {
+				nvidia,pins = "uart3_rts_n_pc0",
+						"uart3_txd_pw6";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* UART-D */
+			ulpi_nxt_py2 {
+				nvidia,pins = "ulpi_nxt_py2";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			ulpi_clk_py0 {
+				nvidia,pins = "ulpi_clk_py0",
+						"ulpi_dir_py1",
+						"ulpi_stp_py3";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* I2S pinmux */
+			dap_i2s0 {
+				nvidia,pins = "dap1_fs_pn0",
+						"dap1_din_pn1",
+						"dap1_dout_pn2",
+						"dap1_sclk_pn3";
+				nvidia,function = "i2s0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			dap_i2s1 {
+				nvidia,pins = "dap2_fs_pa2",
+						"dap2_sclk_pa3",
+						"dap2_din_pa4",
+						"dap2_dout_pa5";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			dap3_fs {
+				nvidia,pins = "dap3_fs_pp0",
+						"dap3_din_pp1";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			dap3_dout {
+				nvidia,pins = "dap3_dout_pp2",
+						"dap3_sclk_pp3";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			dap_i2s3 {
+				nvidia,pins = "dap4_fs_pp4",
+						"dap4_din_pp5",
+						"dap4_dout_pp6",
+						"dap4_sclk_pp7";
+				nvidia,function = "i2s3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Sensors pinmux */
+			nct_irq {
+				nvidia,pins = "pcc2";
+				nvidia,function = "i2s4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Asus EC pinmux */
+			ec_irqs {
+				nvidia,pins = "kb_row10_ps2",
+						"kb_row15_ps7";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			ec_reqs {
+				nvidia,pins = "kb_col1_pq1";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Memory type bootstrap */
+			mem_boostraps {
+				nvidia,pins = "gmi_ad4_pg4",
+						"gmi_ad5_pg5";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* PCI-e pinmux */
+			pex_l2_rst_n {
+				nvidia,pins = "pex_l2_rst_n_pcc6",
+						"pex_l0_rst_n_pdd1",
+						"pex_l1_rst_n_pdd5";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pex_l2_clkreq_n {
+				nvidia,pins = "pex_l2_clkreq_n_pcc7",
+						"pex_l0_prsnt_n_pdd0",
+						"pex_l0_clkreq_n_pdd2",
+						"pex_wake_n_pdd3",
+						"pex_l1_prsnt_n_pdd4",
+						"pex_l1_clkreq_n_pdd6",
+						"pex_l2_prsnt_n_pdd7";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* SPI pinmux */
+			spi1_mosi_px4 {
+				nvidia,pins = "spi1_mosi_px4",
+						"spi1_sck_px5",
+						"spi1_cs0_n_px6",
+						"spi1_miso_px7";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			spi2_cs1_n_pw2 {
+				nvidia,pins = "spi2_cs1_n_pw2";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			spi2_sck_px2 {
+				nvidia,pins = "spi2_sck_px2";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi_a17_pb0 {
+				nvidia,pins = "gmi_a17_pb0",
+						"gmi_a16_pj7";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_a18_pb1 {
+				nvidia,pins = "gmi_a18_pb1";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi_a19_pk7 {
+				nvidia,pins = "gmi_a19_pk7";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Display A pinmux */
+			lcd_pwr0_pb2 {
+				nvidia,pins = "lcd_pwr0_pb2",
+						"lcd_pclk_pb3",
+						"lcd_pwr1_pc1",
+						"lcd_d0_pe0",
+						"lcd_d1_pe1",
+						"lcd_d2_pe2",
+						"lcd_d3_pe3",
+						"lcd_d4_pe4",
+						"lcd_d5_pe5",
+						"lcd_d6_pe6",
+						"lcd_d7_pe7",
+						"lcd_d8_pf0",
+						"lcd_d9_pf1",
+						"lcd_d10_pf2",
+						"lcd_d11_pf3",
+						"lcd_d12_pf4",
+						"lcd_d13_pf5",
+						"lcd_d14_pf6",
+						"lcd_d15_pf7",
+						"lcd_de_pj1",
+						"lcd_hsync_pj3",
+						"lcd_vsync_pj4",
+						"lcd_d16_pm0",
+						"lcd_d17_pm1",
+						"lcd_d18_pm2",
+						"lcd_d19_pm3",
+						"lcd_d20_pm4",
+						"lcd_d21_pm5",
+						"lcd_d22_pm6",
+						"lcd_d23_pm7",
+						"lcd_dc0_pn6",
+						"lcd_sdin_pz2";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			lcd_cs0_n_pn4 {
+				nvidia,pins = "lcd_cs0_n_pn4",
+						"lcd_sdout_pn5",
+						"lcd_wr_n_pz3";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			blink {
+				nvidia,pins = "clk_32k_out_pa0";
+				nvidia,function = "blink";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* KBC keys */
+			kb_col0_pq0 {
+				nvidia,pins = "kb_col0_pq0";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			kb_col1_pq1 {
+				nvidia,pins = "kb_row1_pr1",
+						"kb_row3_pr3",
+						"kb_row8_ps0",
+						"kb_row14_ps6";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			kb_col4_pq4 {
+				nvidia,pins = "kb_col4_pq4",
+						"kb_col5_pq5",
+						"kb_col7_pq7",
+						"kb_row2_pr2",
+						"kb_row4_pr4",
+						"kb_row5_pr5",
+						"kb_row12_ps4",
+						"kb_row13_ps5";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi_wp_n_pc7 {
+				nvidia,pins = "gmi_wp_n_pc7",
+						"gmi_wait_pi7",
+						"gmi_cs3_n_pk4";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_cs0_n_pj0 {
+				nvidia,pins = "gmi_cs0_n_pj0",
+						"gmi_cs1_n_pj2",
+						"gmi_cs2_n_pk3";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			vi_pclk_pt0 {
+				nvidia,pins = "vi_pclk_pt0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+				nvidia,ioreset = <0>;
+			};
+
+			/* GPIO keys pinmux */
+			power_key {
+				nvidia,pins = "pv0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			vol_keys {
+				nvidia,pins = "kb_col2_pq2",
+						"kb_col3_pq3";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Bluetooth */
+			bt_shutdown {
+				nvidia,pins = "pu0";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			bt_dev_wake {
+				nvidia,pins = "pu1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			bt_host_wake {
+				nvidia,pins = "pu6";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pu2 {
+				nvidia,pins = "pu2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pu3 {
+				nvidia,pins = "pu3";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pcc1 {
+				nvidia,pins = "pcc1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pv2 {
+				nvidia,pins = "pv2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pv3 {
+				nvidia,pins = "pv3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			vi_vsync_pd6 {
+				nvidia,pins = "vi_vsync_pd6",
+						"vi_hsync_pd7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+				nvidia,ioreset = <0>;
+			};
+
+			vi_d10_pt2 {
+				nvidia,pins = "vi_d10_pt2",
+						"vi_d0_pt4", "pbb0";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			kb_row0_pr0 {
+				nvidia,pins = "kb_row0_pr0";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_ad0_pg0 {
+				nvidia,pins = "gmi_ad0_pg0",
+						"gmi_ad1_pg1",
+						"gmi_ad2_pg2",
+						"gmi_ad3_pg3",
+						"gmi_ad6_pg6",
+						"gmi_ad7_pg7",
+						"gmi_wr_n_pi0",
+						"gmi_oe_n_pi1",
+						"gmi_dqs_pi2",
+						"gmi_adv_n_pk0",
+						"gmi_clk_pk1";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_ad13_ph5 {
+				nvidia,pins = "gmi_ad13_ph5";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi_ad10_ph2 {
+				nvidia,pins = "gmi_ad10_ph2",
+						"gmi_ad11_ph3",
+						"gmi_ad14_ph6";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_ad12_ph4 {
+				nvidia,pins = "gmi_ad12_ph4",
+						"gmi_rst_n_pi4",
+						"gmi_cs7_n_pi6";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Vibrator control */
+			vibrator {
+				nvidia,pins = "gmi_ad15_ph7";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* PWM pimnmux */
+			pwm_0 {
+				nvidia,pins = "gmi_ad8_ph0";
+				nvidia,function = "pwm0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pwm_2 {
+				nvidia,pins = "pu5";
+				nvidia,function = "pwm2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi_cs6_n_pi3 {
+				nvidia,pins = "gmi_cs6_n_pi3";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Spdif pinmux */
+			spdif_out {
+				nvidia,pins = "spdif_out_pk5";
+				nvidia,function = "spdif";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			spdif_in {
+				nvidia,pins = "spdif_in_pk6";
+				nvidia,function = "spdif";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			vi_d4_pl2 {
+				nvidia,pins = "vi_d4_pl2";
+				nvidia,function = "vi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			vi_d6_pl4 {
+				nvidia,pins = "vi_d6_pl4";
+				nvidia,function = "vi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,lock = <0>;
+				nvidia,ioreset = <0>;
+			};
+
+			vi_mclk_pt1 {
+				nvidia,pins = "vi_mclk_pt1";
+				nvidia,function = "vi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			jtag_rtck {
+				nvidia,pins = "jtag_rtck_pu7";
+				nvidia,function = "rtck";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			crt_hsync_pv6 {
+				nvidia,pins = "crt_hsync_pv6",
+						"crt_vsync_pv7";
+				nvidia,function = "crt";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			clk1_out {
+				nvidia,pins = "clk1_out_pw4";
+				nvidia,function = "extperiph1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			clk2_out {
+				nvidia,pins = "clk2_out_pw5";
+				nvidia,function = "extperiph2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			clk3_out {
+				nvidia,pins = "clk3_out_pee0";
+				nvidia,function = "extperiph3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			sys_clk_req {
+				nvidia,pins = "sys_clk_req_pz5";
+				nvidia,function = "sysclk";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pbb4 {
+				nvidia,pins = "pbb4";
+				nvidia,function = "vgp4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pbb5 {
+				nvidia,pins = "pbb5";
+				nvidia,function = "vgp5";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pbb6 {
+				nvidia,pins = "pbb6";
+				nvidia,function = "vgp6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			clk2_req_pcc5 {
+				nvidia,pins = "clk2_req_pcc5",
+						"clk1_req_pee2";
+				nvidia,function = "dap";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			clk3_req_pee1 {
+				nvidia,pins = "clk3_req_pee1";
+				nvidia,function = "dev3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			owr {
+				nvidia,pins = "owr";
+				nvidia,function = "owr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* GPIO power/drive control */
+			drive_dap1 {
+				nvidia,pins = "drive_dap1",
+						"drive_dap2",
+						"drive_dbg",
+						"drive_at5",
+						"drive_gme",
+						"drive_ddc",
+						"drive_ao1",
+						"drive_uart3";
+				nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
+				nvidia,schmitt = <TEGRA_PIN_ENABLE>;
+				nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
+				nvidia,pull-down-strength = <31>;
+				nvidia,pull-up-strength = <31>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+			};
+
+			drive_sdio1 {
+				nvidia,pins = "drive_sdio1",
+						"drive_sdio3";
+				nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
+				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+				nvidia,pull-down-strength = <46>;
+				nvidia,pull-up-strength = <42>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FAST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FAST>;
+			};
+		};
+	};
+
+	serial@70006040 {
+		compatible = "nvidia,tegra30-hsuart";
+		status = "okay";
+
+		/* Broadcom GPS BCM47511 */
+	};
+
+	serial@70006200 {
+		compatible = "nvidia,tegra30-hsuart";
+		status = "okay";
+
+		nvidia,adjust-baud-rates = <0 9600 100>,
+					   <9600 115200 200>,
+					   <1000000 4000000 136>;
+
+		bluetooth {
+			max-speed = <4000000>;
+
+			clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>;
+			clock-names = "txco";
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(U, 6) IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "host-wakeup";
+
+			device-wakeup-gpios = <&gpio TEGRA_GPIO(U, 1) GPIO_ACTIVE_HIGH>;
+			shutdown-gpios =      <&gpio TEGRA_GPIO(U, 0) GPIO_ACTIVE_HIGH>;
+
+			vbat-supply  = <&vdd_3v3_com>;
+			vddio-supply = <&vdd_1v8_vio>;
+		};
+	};
+
+	pwm@7000a000 {
+		status = "okay";
+	};
+
+	lcd_ddc: i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000c400 {
+		status = "okay";
+		clock-frequency = <400000>;
+	};
+
+	i2c@7000c500 {
+		status = "okay";
+
+		/* Aichi AMI306 digital compass */
+		magnetometer@e {
+			compatible = "asahi-kasei,ak8974";
+			reg = <0x0e>;
+
+			avdd-supply = <&vdd_3v3_sys>;
+			dvdd-supply = <&vdd_1v8_vio>;
+		};
+
+		/* Dynaimage ambient light sensor */
+		light-sensor@1c {
+			compatible = "dynaimage,al3010";
+			reg = <0x1c>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(Z, 2) IRQ_TYPE_LEVEL_HIGH>;
+
+			vdd-supply = <&vdd_3v3_sys>;
+		};
+
+		gyroscope@68 {
+			compatible = "invensense,mpu3050";
+			reg = <0x68>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(X, 1) IRQ_TYPE_EDGE_RISING>;
+
+			vdd-supply    = <&vdd_3v3_sys>;
+			vlogic-supply = <&vdd_1v8_vio>;
+
+			i2c-gate {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				accelerometer@f {
+					compatible = "kionix,kxtf9";
+					reg = <0x0f>;
+
+					interrupt-parent = <&gpio>;
+					interrupts = <TEGRA_GPIO(O, 5) IRQ_TYPE_EDGE_RISING>;
+
+					vdd-supply = <&vdd_1v8_vio>;
+					vddio-supply = <&vdd_1v8_vio>;
+				};
+			};
+		};
+	};
+
+	hdmi_ddc: i2c@7000c700 {
+		status = "okay";
+		clock-frequency = <93750>;
+	};
+
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		nct72: temperature-sensor@4c {
+			compatible = "onnn,nct1008";
+			reg = <0x4c>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(CC, 2) IRQ_TYPE_EDGE_FALLING>;
+
+			vcc-supply = <&vdd_3v3_sys>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		/* Texas Instruments TPS659110 PMIC */
+		pmic: pmic@2d {
+			compatible = "ti,tps65911";
+			reg = <0x2d>;
+
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			wakeup-source;
+
+			ti,en-gpio-sleep = <0 0 1 0 0 0 0 0 0>;
+			ti,system-power-controller;
+			ti,sleep-keep-ck32k;
+			ti,sleep-enable;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			vcc1-supply = <&vdd_5v0_bat>;
+			vcc2-supply = <&vdd_5v0_bat>;
+			vcc3-supply = <&vdd_1v8_vio>;
+			vcc4-supply = <&vdd_5v0_sys>;
+			vcc5-supply = <&vdd_5v0_bat>;
+			vcc6-supply = <&vdd_3v3_sys>;
+			vcc7-supply = <&vdd_5v0_bat>;
+			vccio-supply = <&vdd_5v0_bat>;
+
+			pmic-sleep-hog {
+				gpio-hog;
+				gpios = <2 GPIO_ACTIVE_HIGH>;
+				output-high;
+			};
+
+			regulators {
+				/* VDD1 is not used by Transformers */
+
+				vddio_ddr: vdd2 {
+					regulator-name = "vddio_ddr";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				vdd_cpu: vddctrl {
+					regulator-name = "vdd_cpu,vdd_sys";
+					regulator-min-microvolt = <600000>;
+					regulator-max-microvolt = <1400000>;
+					regulator-coupled-with = <&vdd_core>;
+					regulator-coupled-max-spread = <300000>;
+					regulator-max-step-microvolt = <100000>;
+					regulator-always-on;
+					regulator-boot-on;
+					ti,regulator-ext-sleep-control = <1>;
+
+					nvidia,tegra-cpu-regulator;
+				};
+
+				vdd_1v8_vio: vio {
+					regulator-name = "vdd_1v8_gen";
+					/* FIXME: eMMC won't work, if set to 1.8 V */
+					regulator-min-microvolt = <1500000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				/* eMMC VDD */
+				vcore_emmc: ldo1 {
+					regulator-name = "vdd_emmc_core";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				/* uSD slot VDD */
+				vdd_usd: ldo2 {
+					regulator-name = "vdd_usd";
+					regulator-min-microvolt = <3100000>;
+					regulator-max-microvolt = <3100000>;
+					/* FIXME: Without this, voltage switching fails */
+					regulator-always-on;
+				};
+
+				/* uSD slot VDDIO */
+				vddio_usd: ldo3 {
+					regulator-name = "vddio_usd";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3100000>;
+				};
+
+				ldo4 {
+					regulator-name = "vdd_rtc";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				/* LDO5 is not used by Transformers */
+
+				ldo6 {
+					regulator-name = "avdd_dsi_csi,pwrdet_mipi";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				ldo7 {
+					regulator-name = "vdd_pllm,x,u,a_p_c_s";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					regulator-boot-on;
+					ti,regulator-ext-sleep-control = <8>;
+				};
+
+				ldo8 {
+					regulator-name = "vdd_ddr_hs";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+					ti,regulator-ext-sleep-control = <8>;
+				};
+			};
+		};
+
+		vdd_core: core-regulator@60 {
+			compatible = "ti,tps62361";
+			reg = <0x60>;
+
+			regulator-name = "tps62361-vout";
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1770000>;
+			regulator-coupled-with = <&vdd_cpu>;
+			regulator-coupled-max-spread = <300000>;
+			regulator-max-step-microvolt = <100000>;
+			regulator-boot-on;
+			regulator-always-on;
+			ti,enable-vout-discharge;
+			ti,vsel0-state-high;
+			ti,vsel1-state-high;
+
+			nvidia,tegra-core-regulator;
+		};
+	};
+
+	pmc@7000e400 {
+		status = "okay";
+		nvidia,invert-interrupt;
+		/* FIXME: LP1 doesn't work at the moment */
+		nvidia,suspend-mode = <2>;
+		nvidia,cpu-pwr-good-time = <2000>;
+		nvidia,cpu-pwr-off-time = <200>;
+		nvidia,core-pwr-good-time = <3845 3845>;
+		nvidia,core-pwr-off-time = <0>;
+		nvidia,core-power-req-active-high;
+		nvidia,sys-clock-req-active-high;
+		core-supply = <&vdd_core>;
+
+		/* Set DEV_OFF + PWR_OFF_SET bit in DCDC control register of TPS65911 PMIC  */
+		i2c-thermtrip {
+			nvidia,i2c-controller-id = <4>;
+			nvidia,bus-addr = <0x2d>;
+			nvidia,reg-addr = <0x3f>;
+			nvidia,reg-data = <0x81>;
+		};
+	};
+
+	hda@70030000 {
+		status = "okay";
+	};
+
+	ahub@70080000 {
+		i2s@70080400 {		/* i2s1 */
+			status = "okay";
+		};
+
+		/* BT SCO */
+		i2s@70080600 {		/* i2s3 */
+			status = "okay";
+		};
+	};
+
+	mmc@78000000 {
+		status = "okay";
+
+		/* FIXME: Full 208Mhz clock rate doesn't work reliably */
+		max-frequency = <104000000>;
+
+		cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
+		bus-width = <4>;
+
+		vmmc-supply = <&vdd_usd>;	/* ldo2 */
+		vqmmc-supply = <&vddio_usd>;	/* ldo3 */
+	};
+
+	mmc@78000400 {
+		status = "okay";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		assigned-clocks = <&tegra_car TEGRA30_CLK_SDMMC3>;
+		assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_C>;
+		assigned-clock-rates = <50000000>;
+
+		max-frequency = <50000000>;
+		keep-power-in-suspend;
+		bus-width = <4>;
+		non-removable;
+
+		mmc-pwrseq = <&brcm_wifi_pwrseq>;
+		vmmc-supply = <&vdd_3v3_com>;
+		vqmmc-supply = <&vdd_1v8_vio>;
+
+		/* Azurewave AW-NH615 BCM4329B1 or AW-NH665 BCM4330B1 */
+		wifi@1 {
+			compatible = "brcm,bcm4329-fmac";
+			reg = <1>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(O, 4) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "host-wake";
+		};
+	};
+
+	mmc@78000600 {
+		status = "okay";
+		bus-width = <8>;
+		vmmc-supply = <&vcore_emmc>;
+		vqmmc-supply = <&vdd_1v8_vio>;
+		mmc-ddr-3_3v;
+		non-removable;
+	};
+
+	/* USB via ASUS connector */
+	usb@7d000000 {
+		compatible = "nvidia,tegra30-udc";
+		status = "okay";
+		dr_mode = "peripheral";
+	};
+
+	usb-phy@7d000000 {
+		status = "okay";
+		dr_mode = "peripheral";
+		nvidia,hssync-start-delay = <0>;
+		nvidia,xcvr-lsfslew = <2>;
+		nvidia,xcvr-lsrslew = <2>;
+		vbus-supply = <&vdd_5v0_sys>;
+	};
+
+	/* Dock's USB port */
+	usb@7d008000 {
+		status = "okay";
+	};
+
+	usb-phy@7d008000 {
+		status = "okay";
+		vbus-supply = <&vdd_5v0_bat>;
+	};
+
+	mains: ac-adapter-detect {
+		compatible = "gpio-charger";
+		charger-type = "mains";
+		gpios = <&gpio TEGRA_GPIO(H, 5) GPIO_ACTIVE_HIGH>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+
+		enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+		power-supply = <&vdd_5v0_bl>;
+		pwms = <&pwm 0 4000000>;
+
+		brightness-levels = <1 255>;
+		num-interpolated-steps = <254>;
+		default-brightness-level = <40>;
+	};
+
+	/* PMIC has a built-in 32KHz oscillator which is used by PMC */
+	clk32k_in: clock-32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "pmic-oscillator";
+	};
+
+	cpus {
+		cpu0: cpu@0 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+		cpu1: cpu@1 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+		cpu2: cpu@2 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+		cpu3: cpu@3 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+	};
+
+	extcon-keys {
+		compatible = "gpio-keys";
+		interrupt-parent = <&gpio>;
+
+		dock-hall-sensor {
+			label = "Lid sensor";
+			gpios = <&gpio TEGRA_GPIO(S, 6) GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			debounce-interval = <500>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		lineout-detect {
+			label = "Audio dock line-out detect";
+			gpios = <&gpio TEGRA_GPIO(X, 3) GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LINEOUT_INSERT>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+	};
+
+	firmware {
+		trusted-foundations {
+			compatible = "tlm,trusted-foundations";
+			tlm,version-major = <2>;
+			tlm,version-minor = <8>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		interrupt-parent = <&gpio>;
+
+		power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		volume-up {
+			label = "Volume Up";
+			gpios = <&gpio TEGRA_GPIO(Q, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		volume-down {
+			label = "Volume Down";
+			gpios = <&gpio TEGRA_GPIO(Q, 3) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+	};
+
+	vdd_5v0_bat: regulator-bat {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_ac_bat";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_5v0_cp: regulator-sby {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v0_sby";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_bat>;
+	};
+
+	vdd_5v0_sys: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v0_sys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&pmic 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_bat>;
+	};
+
+	vdd_1v5_ddr: regulator-ddr {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_ddr";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&pmic 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_bat>;
+	};
+
+	vdd_3v3_sys: regulator-3v {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v3_sys";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_bat>;
+	};
+
+	vdd_pnl: regulator-panel {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_panel";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-enable-ramp-delay = <20000>;
+		gpio = <&gpio TEGRA_GPIO(W, 1) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_sys>;
+	};
+
+	vdd_3v3_com: regulator-com {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v3_com";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		gpio = <&gpio TEGRA_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_sys>;
+	};
+
+	vdd_5v0_bl: regulator-bl {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v0_bl";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		gpio = <&gpio TEGRA_GPIO(H, 3) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_bat>;
+	};
+
+	hdmi_5v0_sys: regulator-hdmi {
+		compatible = "regulator-fixed";
+		regulator-name = "hdmi_5v0_sys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	sound {
+		nvidia,i2s-controller = <&tegra_i2s1>;
+
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
+		nvidia,hp-mute-gpios = <&gpio TEGRA_GPIO(X, 2) GPIO_ACTIVE_LOW>;
+
+		clocks = <&tegra_car TEGRA30_CLK_PLL_A>,
+			 <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
+			 <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+
+		assigned-clocks = <&tegra_car TEGRA30_CLK_EXTERN1>,
+				  <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+
+		assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
+					 <&tegra_car TEGRA30_CLK_EXTERN1>;
+	};
+
+	thermal-zones {
+		/*
+		 * NCT72 has two sensors:
+		 *
+		 *	0: internal that monitors ambient/skin temperature
+		 *	1: external that is connected to the CPU's diode
+		 *
+		 * Ideally we should use userspace thermal governor,
+		 * but it's a much more complex solution.  The "skin"
+		 * zone exists as a simpler solution which prevents
+		 * Transformers from getting too hot from a user's
+		 * tactile perspective. The CPU zone is intended to
+		 * protect silicon from damage.
+		 */
+
+		skin-thermal {
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <5000>; /* milliseconds */
+
+			thermal-sensors = <&nct72 0>;
+
+			trips {
+				trip0: skin-alert {
+					/* throttle at 57C until temperature drops to 56.8C */
+					temperature = <57000>;
+					hysteresis = <200>;
+					type = "passive";
+				};
+
+				trip1: skin-crit {
+					/* shut down at 65C */
+					temperature = <65000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&trip0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&actmon THERMAL_NO_LIMIT
+								  THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu-thermal {
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <5000>; /* milliseconds */
+
+			thermal-sensors = <&nct72 1>;
+
+			trips {
+				trip2: cpu-alert {
+					/* throttle at 75C until temperature drops to 74.8C */
+					temperature = <75000>;
+					hysteresis = <200>;
+					type = "passive";
+				};
+
+				trip3: cpu-crit {
+					/* shut down at 90C */
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map1 {
+					trip = <&trip2>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&actmon THERMAL_NO_LIMIT
+								  THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	brcm_wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+
+		clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>;
+		clock-names = "ext_clock";
+
+		reset-gpios = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_LOW>;
+		post-power-on-delay-ms = <300>;
+		power-off-delay-us = <300>;
+	};
+};
diff --git a/dts/src/arm/tegra30-beaver.dts b/dts/src/arm/tegra30-beaver.dts
index e159feeede..5ad62b567d 100644
--- a/dts/src/arm/tegra30-beaver.dts
+++ b/dts/src/arm/tegra30-beaver.dts
@@ -1898,7 +1898,8 @@
 	spi@7000da00 {
 		status = "okay";
 		spi-max-frequency = <25000000>;
-		spi-flash@1 {
+
+		flash@1 {
 			compatible = "winbond,w25q32", "jedec,spi-nor";
 			reg = <1>;
 			spi-max-frequency = <20000000>;
@@ -1915,6 +1916,7 @@
 		nvidia,core-pwr-off-time = <0>;
 		nvidia,core-power-req-active-high;
 		nvidia,sys-clock-req-active-high;
+		core-supply = <&core_vdd_reg>;
 	};
 
 	ahub@70080000 {
@@ -1966,7 +1968,7 @@
 		status = "okay";
 	};
 
-	clk32k_in: clock@0 {
+	clk32k_in: clock-32k {
 		compatible = "fixed-clock";
 		clock-frequency = <32768>;
 		#clock-cells = <0>;
@@ -1985,7 +1987,7 @@
 		};
 	};
 
-	vdd_5v_in_reg: regulator@0 {
+	vdd_5v_in_reg: regulator-5v0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_5v_in";
 		regulator-min-microvolt = <5000000>;
@@ -1993,7 +1995,7 @@
 		regulator-always-on;
 	};
 
-	chargepump_5v_reg: regulator@1 {
+	chargepump_5v_reg: regulator-chargepump {
 		compatible = "regulator-fixed";
 		regulator-name = "chargepump_5v";
 		regulator-min-microvolt = <5000000>;
@@ -2004,7 +2006,7 @@
 		gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
 	};
 
-	ddr_reg: regulator@2 {
+	ddr_reg: regulator-ddr {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_ddr";
 		regulator-min-microvolt = <1500000>;
@@ -2016,7 +2018,7 @@
 		vin-supply = <&vdd_5v_in_reg>;
 	};
 
-	vdd_5v_sata_reg: regulator@3 {
+	vdd_5v_sata_reg: regulator-sata {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_5v_sata";
 		regulator-min-microvolt = <5000000>;
@@ -2028,7 +2030,7 @@
 		vin-supply = <&vdd_5v_in_reg>;
 	};
 
-	usb1_vbus_reg: regulator@4 {
+	usb1_vbus_reg: regulator-usb1 {
 		compatible = "regulator-fixed";
 		regulator-name = "usb1_vbus";
 		regulator-min-microvolt = <5000000>;
@@ -2039,7 +2041,7 @@
 		vin-supply = <&vdd_5v_in_reg>;
 	};
 
-	usb3_vbus_reg: regulator@5 {
+	usb3_vbus_reg: regulator-usb3 {
 		compatible = "regulator-fixed";
 		regulator-name = "usb3_vbus";
 		regulator-min-microvolt = <5000000>;
@@ -2050,7 +2052,7 @@
 		vin-supply = <&vdd_5v_in_reg>;
 	};
 
-	sys_3v3_reg: regulator@6 {
+	sys_3v3_reg: regulator-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "sys_3v3,vdd_3v3_alw";
 		regulator-min-microvolt = <3300000>;
@@ -2062,7 +2064,7 @@
 		vin-supply = <&vdd_5v_in_reg>;
 	};
 
-	sys_3v3_pexs_reg: regulator@7 {
+	sys_3v3_pexs_reg: regulator-pexs {
 		compatible = "regulator-fixed";
 		regulator-name = "sys_3v3_pexs";
 		regulator-min-microvolt = <3300000>;
@@ -2074,7 +2076,7 @@
 		vin-supply = <&sys_3v3_reg>;
 	};
 
-	vdd_5v0_hdmi: regulator@8 {
+	vdd_5v0_hdmi: regulator-hdmi {
 		compatible = "regulator-fixed";
 		regulator-name = "+VDD_5V_HDMI";
 		regulator-min-microvolt = <5000000>;
diff --git a/dts/src/arm/tegra30-cardhu-a02.dts b/dts/src/arm/tegra30-cardhu-a02.dts
index 4899e05a0d..247185314f 100644
--- a/dts/src/arm/tegra30-cardhu-a02.dts
+++ b/dts/src/arm/tegra30-cardhu-a02.dts
@@ -16,7 +16,7 @@
 		keep-power-in-suspend;
 	};
 
-	ddr_reg: regulator@100 {
+	ddr_reg: regulator-ddr {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_ddr";
 		regulator-min-microvolt = <1500000>;
@@ -27,7 +27,7 @@
 		gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
 	};
 
-	sys_3v3_reg: regulator@101 {
+	sys_3v3_reg: regulator-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "sys_3v3";
 		regulator-min-microvolt = <3300000>;
@@ -38,7 +38,7 @@
 		gpio = <&pmic 7 GPIO_ACTIVE_HIGH>;
 	};
 
-	usb1_vbus_reg: regulator@102 {
+	usb1_vbus_reg: regulator-usb1 {
 		compatible = "regulator-fixed";
 		regulator-name = "usb1_vbus";
 		regulator-min-microvolt = <5000000>;
@@ -49,7 +49,7 @@
 		vin-supply = <&vdd_5v0_reg>;
 	};
 
-	usb3_vbus_reg: regulator@103 {
+	usb3_vbus_reg: regulator-usb3 {
 		compatible = "regulator-fixed";
 		regulator-name = "usb3_vbus";
 		regulator-min-microvolt = <5000000>;
@@ -60,7 +60,7 @@
 		vin-supply = <&vdd_5v0_reg>;
 	};
 
-	vdd_5v0_reg: regulator@104 {
+	vdd_5v0_reg: regulator-5v0 {
 		compatible = "regulator-fixed";
 		regulator-name = "5v0";
 		regulator-min-microvolt = <5000000>;
@@ -69,7 +69,7 @@
 		gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
 	};
 
-	vdd_bl_reg: regulator@105 {
+	vdd_bl_reg: regulator-bl {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_bl";
 		regulator-min-microvolt = <5000000>;
diff --git a/dts/src/arm/tegra30-cardhu-a04.dts b/dts/src/arm/tegra30-cardhu-a04.dts
index a11028b8b6..2911f08863 100644
--- a/dts/src/arm/tegra30-cardhu-a04.dts
+++ b/dts/src/arm/tegra30-cardhu-a04.dts
@@ -16,7 +16,7 @@
 		keep-power-in-suspend;
 	};
 
-	ddr_reg: regulator@100 {
+	ddr_reg: regulator-ddr {
 		compatible = "regulator-fixed";
 		regulator-name = "ddr";
 		regulator-min-microvolt = <1500000>;
@@ -27,7 +27,7 @@
 		gpio = <&pmic 7 GPIO_ACTIVE_HIGH>;
 	};
 
-	sys_3v3_reg: regulator@101 {
+	sys_3v3_reg: regulator-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "sys_3v3";
 		regulator-min-microvolt = <3300000>;
@@ -38,7 +38,7 @@
 		gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
 	};
 
-	usb1_vbus_reg: regulator@102 {
+	usb1_vbus_reg: regulator-usb1 {
 		compatible = "regulator-fixed";
 		regulator-name = "usb1_vbus";
 		regulator-min-microvolt = <5000000>;
@@ -49,7 +49,7 @@
 		vin-supply = <&vdd_5v0_reg>;
 	};
 
-	usb3_vbus_reg: regulator@103 {
+	usb3_vbus_reg: regulator-usb3 {
 		compatible = "regulator-fixed";
 		regulator-name = "usb3_vbus";
 		regulator-min-microvolt = <5000000>;
@@ -60,7 +60,7 @@
 		vin-supply = <&vdd_5v0_reg>;
 	};
 
-	vdd_5v0_reg: regulator@104 {
+	vdd_5v0_reg: regulator-5v0 {
 		compatible = "regulator-fixed";
 		regulator-name = "5v0";
 		regulator-min-microvolt = <5000000>;
@@ -69,7 +69,7 @@
 		gpio = <&pmic 8 GPIO_ACTIVE_HIGH>;
 	};
 
-	vdd_bl_reg: regulator@105 {
+	vdd_bl_reg: regulator-bl {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_bl";
 		regulator-min-microvolt = <5000000>;
@@ -80,7 +80,7 @@
 		gpio = <&gpio TEGRA_GPIO(DD, 2) GPIO_ACTIVE_HIGH>;
 	};
 
-	vdd_bl2_reg: regulator@106 {
+	vdd_bl2_reg: regulator-bl2 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_bl2";
 		regulator-min-microvolt = <5000000>;
diff --git a/dts/src/arm/tegra30-cardhu.dtsi b/dts/src/arm/tegra30-cardhu.dtsi
index 448f1397e6..ba257ed36d 100644
--- a/dts/src/arm/tegra30-cardhu.dtsi
+++ b/dts/src/arm/tegra30-cardhu.dtsi
@@ -175,6 +175,7 @@
 
 	serial@70006200 {
 		compatible = "nvidia,tegra30-hsuart";
+		/delete-property/ reg-shift;
 		status = "okay";
 	};
 
@@ -209,7 +210,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x70>;
-			reset-gpio = <&gpio TEGRA_GPIO(BB, 0) GPIO_ACTIVE_LOW>;
+			reset-gpios = <&gpio TEGRA_GPIO(BB, 0) GPIO_ACTIVE_LOW>;
 		};
 	};
 
@@ -374,7 +375,8 @@
 	spi@7000da00 {
 		status = "okay";
 		spi-max-frequency = <25000000>;
-		spi-flash@1 {
+
+		flash@1 {
 			compatible = "winbond,w25q32", "jedec,spi-nor";
 			reg = <1>;
 			spi-max-frequency = <20000000>;
@@ -391,6 +393,7 @@
 		nvidia,core-pwr-off-time = <0>;
 		nvidia,core-power-req-active-high;
 		nvidia,sys-clock-req-active-high;
+		core-supply = <&vdd_core>;
 	};
 
 	ahub@70080000 {
@@ -433,7 +436,7 @@
 		default-brightness-level = <6>;
 	};
 
-	clk32k_in: clock@0 {
+	clk32k_in: clock-32k {
 		compatible = "fixed-clock";
 		clock-frequency = <32768>;
 		#clock-cells = <0>;
@@ -475,7 +478,7 @@
 		backlight = <&backlight>;
 	};
 
-	vdd_ac_bat_reg: regulator@0 {
+	vdd_ac_bat_reg: regulator-acbat {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_ac_bat";
 		regulator-min-microvolt = <5000000>;
@@ -483,7 +486,7 @@
 		regulator-always-on;
 	};
 
-	cam_1v8_reg: regulator@1 {
+	cam_1v8_reg: regulator-cam {
 		compatible = "regulator-fixed";
 		regulator-name = "cam_1v8";
 		regulator-min-microvolt = <1800000>;
@@ -493,7 +496,7 @@
 		vin-supply = <&vio_reg>;
 	};
 
-	cp_5v_reg: regulator@2 {
+	cp_5v_reg: regulator-5v0cp {
 		compatible = "regulator-fixed";
 		regulator-name = "cp_5v";
 		regulator-min-microvolt = <5000000>;
@@ -504,7 +507,7 @@
 		gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
 	};
 
-	emmc_3v3_reg: regulator@3 {
+	emmc_3v3_reg: regulator-emmc {
 		compatible = "regulator-fixed";
 		regulator-name = "emmc_3v3";
 		regulator-min-microvolt = <3300000>;
@@ -516,7 +519,7 @@
 		vin-supply = <&sys_3v3_reg>;
 	};
 
-	modem_3v3_reg: regulator@4 {
+	modem_3v3_reg: regulator-modem {
 		compatible = "regulator-fixed";
 		regulator-name = "modem_3v3";
 		regulator-min-microvolt = <3300000>;
@@ -525,7 +528,7 @@
 		gpio = <&gpio TEGRA_GPIO(D, 6) GPIO_ACTIVE_HIGH>;
 	};
 
-	pex_hvdd_3v3_reg: regulator@5 {
+	pex_hvdd_3v3_reg: regulator-pex {
 		compatible = "regulator-fixed";
 		regulator-name = "pex_hvdd_3v3";
 		regulator-min-microvolt = <3300000>;
@@ -535,7 +538,7 @@
 		vin-supply = <&sys_3v3_reg>;
 	};
 
-	vdd_cam1_ldo_reg: regulator@6 {
+	vdd_cam1_ldo_reg: regulator-cam1 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_cam1_ldo";
 		regulator-min-microvolt = <2800000>;
@@ -545,7 +548,7 @@
 		vin-supply = <&sys_3v3_reg>;
 	};
 
-	vdd_cam2_ldo_reg: regulator@7 {
+	vdd_cam2_ldo_reg: regulator-cam2 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_cam2_ldo";
 		regulator-min-microvolt = <2800000>;
@@ -555,7 +558,7 @@
 		vin-supply = <&sys_3v3_reg>;
 	};
 
-	vdd_cam3_ldo_reg: regulator@8 {
+	vdd_cam3_ldo_reg: regulator-cam3 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_cam3_ldo";
 		regulator-min-microvolt = <3300000>;
@@ -565,7 +568,7 @@
 		vin-supply = <&sys_3v3_reg>;
 	};
 
-	vdd_com_reg: regulator@9 {
+	vdd_com_reg: regulator-com {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_com";
 		regulator-min-microvolt = <3300000>;
@@ -577,7 +580,7 @@
 		vin-supply = <&sys_3v3_reg>;
 	};
 
-	vdd_fuse_3v3_reg: regulator@10 {
+	vdd_fuse_3v3_reg: regulator-fuse {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_fuse_3v3";
 		regulator-min-microvolt = <3300000>;
@@ -587,7 +590,7 @@
 		vin-supply = <&sys_3v3_reg>;
 	};
 
-	vdd_pnl1_reg: regulator@11 {
+	vdd_pnl1_reg: regulator-pnl1 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_pnl1";
 		regulator-min-microvolt = <3300000>;
@@ -599,7 +602,7 @@
 		vin-supply = <&sys_3v3_reg>;
 	};
 
-	vdd_vid_reg: regulator@12 {
+	vdd_vid_reg: regulator-vid {
 		compatible = "regulator-fixed";
 		regulator-name = "vddio_vid";
 		regulator-min-microvolt = <5000000>;
diff --git a/dts/src/arm/tegra30-colibri.dtsi b/dts/src/arm/tegra30-colibri.dtsi
index 413e352158..be691a1c33 100644
--- a/dts/src/arm/tegra30-colibri.dtsi
+++ b/dts/src/arm/tegra30-colibri.dtsi
@@ -701,10 +701,12 @@
 
 	serial@70006040 {
 		compatible = "nvidia,tegra30-hsuart";
+		/delete-property/ reg-shift;
 	};
 
 	serial@70006300 {
 		compatible = "nvidia,tegra30-hsuart";
+		/delete-property/ reg-shift;
 	};
 
 	hdmi_ddc: i2c@7000c700 {
@@ -765,9 +767,14 @@
 
 				vddctrl_reg: vddctrl {
 					regulator-name = "+V1.0_VDD_CPU";
-					regulator-min-microvolt = <1150000>;
-					regulator-max-microvolt = <1150000>;
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-coupled-with = <&vdd_core>;
+					regulator-coupled-max-spread = <300000>;
+					regulator-max-step-microvolt = <100000>;
 					regulator-always-on;
+
+					nvidia,tegra-cpu-regulator;
 				};
 
 				reg_1v8_vio: vio {
@@ -890,18 +897,20 @@
 		};
 
 		/* SW: +V1.2_VDD_CORE */
-		regulator@60 {
+		vdd_core: regulator@60 {
 			compatible = "ti,tps62362";
 			reg = <0x60>;
 
 			regulator-name = "tps62362-vout";
 			regulator-min-microvolt = <900000>;
 			regulator-max-microvolt = <1400000>;
+			regulator-coupled-with = <&vddctrl_reg>;
+			regulator-coupled-max-spread = <300000>;
+			regulator-max-step-microvolt = <100000>;
 			regulator-boot-on;
 			regulator-always-on;
-			ti,vsel0-state-low;
-			/* VSEL1: EN_CORE_DVFS_N low for DVFS */
-			ti,vsel1-state-low;
+
+			nvidia,tegra-core-regulator;
 		};
 	};
 
@@ -914,6 +923,7 @@
 		nvidia,core-pwr-off-time = <0>;
 		nvidia,core-power-req-active-high;
 		nvidia,sys-clock-req-active-high;
+		core-supply = <&vdd_core>;
 
 		/* Set DEV_OFF bit in DCDC control register of TPS65911 PMIC */
 		i2c-thermtrip {
@@ -951,6 +961,7 @@
 		#size-cells = <0>;
 
 		asix@1 {
+			compatible = "usbb95,772b";
 			reg = <1>;
 			local-mac-address = [00 00 00 00 00 00];
 		};
@@ -1044,7 +1055,7 @@
 };
 
 &gpio {
-	lan-reset-n {
+	lan-reset-n-hog {
 		gpio-hog;
 		gpios = <TEGRA_GPIO(DD, 0) GPIO_ACTIVE_HIGH>;
 		output-high;
diff --git a/dts/src/arm/tegra30-cpu-opp-microvolt.dtsi b/dts/src/arm/tegra30-cpu-opp-microvolt.dtsi
index 1be715d2a4..b8e0e91170 100644
--- a/dts/src/arm/tegra30-cpu-opp-microvolt.dtsi
+++ b/dts/src/arm/tegra30-cpu-opp-microvolt.dtsi
@@ -1,288 +1,288 @@
 // SPDX-License-Identifier: GPL-2.0
 
 / {
-	cpu0_opp_table: cpu_opp_table0 {
-		opp@51000000,800 {
+	cpu0_opp_table: opp-table-cpu0 {
+		opp-51000000-800 {
 			opp-microvolt = <800000 800000 1250000>;
 		};
 
-		opp@51000000,850 {
+		opp-51000000-850 {
 			opp-microvolt = <850000 850000 1250000>;
 		};
 
-		opp@51000000,912 {
+		opp-51000000-912 {
 			opp-microvolt = <912000 912000 1250000>;
 		};
 
-		opp@102000000,800 {
+		opp-102000000-800 {
 			opp-microvolt = <800000 800000 1250000>;
 		};
 
-		opp@102000000,850 {
+		opp-102000000-850 {
 			opp-microvolt = <850000 850000 1250000>;
 		};
 
-		opp@102000000,912 {
+		opp-102000000-912 {
 			opp-microvolt = <912000 912000 1250000>;
 		};
 
-		opp@204000000,800 {
+		opp-204000000-800 {
 			opp-microvolt = <800000 800000 1250000>;
 		};
 
-		opp@204000000,850 {
+		opp-204000000-850 {
 			opp-microvolt = <850000 850000 1250000>;
 		};
 
-		opp@204000000,912 {
+		opp-204000000-912 {
 			opp-microvolt = <912000 912000 1250000>;
 		};
 
-		opp@312000000,850 {
+		opp-312000000-850 {
 			opp-microvolt = <850000 850000 1250000>;
 		};
 
-		opp@312000000,912 {
+		opp-312000000-912 {
 			opp-microvolt = <912000 912000 1250000>;
 		};
 
-		opp@340000000,800 {
+		opp-340000000-800 {
 			opp-microvolt = <800000 800000 1250000>;
 		};
 
-		opp@340000000,850 {
+		opp-340000000-850 {
 			opp-microvolt = <850000 850000 1250000>;
 		};
 
-		opp@370000000,800 {
+		opp-370000000-800 {
 			opp-microvolt = <800000 800000 1250000>;
 		};
 
-		opp@456000000,850 {
+		opp-456000000-850 {
 			opp-microvolt = <850000 850000 1250000>;
 		};
 
-		opp@456000000,912 {
+		opp-456000000-912 {
 			opp-microvolt = <912000 912000 1250000>;
 		};
 
-		opp@475000000,800 {
+		opp-475000000-800 {
 			opp-microvolt = <800000 800000 1250000>;
 		};
 
-		opp@475000000,850 {
+		opp-475000000-850 {
 			opp-microvolt = <850000 850000 1250000>;
 		};
 
-		opp@608000000,850 {
+		opp-608000000-850 {
 			opp-microvolt = <850000 850000 1250000>;
 		};
 
-		opp@608000000,912 {
+		opp-608000000-912 {
 			opp-microvolt = <912000 912000 1250000>;
 		};
 
-		opp@620000000,850 {
+		opp-620000000-850 {
 			opp-microvolt = <850000 850000 1250000>;
 		};
 
-		opp@640000000,850 {
+		opp-640000000-850 {
 			opp-microvolt = <850000 850000 1250000>;
 		};
 
-		opp@640000000,900 {
+		opp-640000000-900 {
 			opp-microvolt = <900000 900000 1250000>;
 		};
 
-		opp@760000000,850 {
+		opp-760000000-850 {
 			opp-microvolt = <850000 850000 1250000>;
 		};
 
-		opp@760000000,900 {
+		opp-760000000-900 {
 			opp-microvolt = <900000 900000 1250000>;
 		};
 
-		opp@760000000,912 {
+		opp-760000000-912 {
 			opp-microvolt = <912000 912000 1250000>;
 		};
 
-		opp@760000000,975 {
+		opp-760000000-975 {
 			opp-microvolt = <975000 975000 1250000>;
 		};
 
-		opp@816000000,850 {
+		opp-816000000-850 {
 			opp-microvolt = <850000 850000 1250000>;
 		};
 
-		opp@816000000,912 {
+		opp-816000000-912 {
 			opp-microvolt = <912000 912000 1250000>;
 		};
 
-		opp@860000000,850 {
+		opp-860000000-850 {
 			opp-microvolt = <850000 850000 1250000>;
 		};
 
-		opp@860000000,900 {
+		opp-860000000-900 {
 			opp-microvolt = <900000 900000 1250000>;
 		};
 
-		opp@860000000,975 {
+		opp-860000000-975 {
 			opp-microvolt = <975000 975000 1250000>;
 		};
 
-		opp@860000000,1000 {
+		opp-860000000-1000 {
 			opp-microvolt = <1000000 1000000 1250000>;
 		};
 
-		opp@910000000,900 {
+		opp-910000000-900 {
 			opp-microvolt = <900000 900000 1250000>;
 		};
 
-		opp@1000000000,900 {
+		opp-1000000000-900 {
 			opp-microvolt = <900000 900000 1250000>;
 		};
 
-		opp@1000000000,975 {
+		opp-1000000000-975 {
 			opp-microvolt = <975000 975000 1250000>;
 		};
 
-		opp@1000000000,1000 {
+		opp-1000000000-1000 {
 			opp-microvolt = <1000000 1000000 1250000>;
 		};
 
-		opp@1000000000,1025 {
+		opp-1000000000-1025 {
 			opp-microvolt = <1025000 1025000 1250000>;
 		};
 
-		opp@1100000000,900 {
+		opp-1100000000-900 {
 			opp-microvolt = <900000 900000 1250000>;
 		};
 
-		opp@1100000000,975 {
+		opp-1100000000-975 {
 			opp-microvolt = <975000 975000 1250000>;
 		};
 
-		opp@1100000000,1000 {
+		opp-1100000000-1000 {
 			opp-microvolt = <1000000 1000000 1250000>;
 		};
 
-		opp@1100000000,1025 {
+		opp-1100000000-1025 {
 			opp-microvolt = <1025000 1025000 1250000>;
 		};
 
-		opp@1100000000,1075 {
+		opp-1100000000-1075 {
 			opp-microvolt = <1075000 1075000 1250000>;
 		};
 
-		opp@1150000000,975 {
+		opp-1150000000-975 {
 			opp-microvolt = <975000 975000 1250000>;
 		};
 
-		opp@1200000000,975 {
+		opp-1200000000-975 {
 			opp-microvolt = <975000 975000 1250000>;
 		};
 
-		opp@1200000000,1000 {
+		opp-1200000000-1000 {
 			opp-microvolt = <1000000 1000000 1250000>;
 		};
 
-		opp@1200000000,1025 {
+		opp-1200000000-1025 {
 			opp-microvolt = <1025000 1025000 1250000>;
 		};
 
-		opp@1200000000,1050 {
+		opp-1200000000-1050 {
 			opp-microvolt = <1050000 1050000 1250000>;
 		};
 
-		opp@1200000000,1075 {
+		opp-1200000000-1075 {
 			opp-microvolt = <1075000 1075000 1250000>;
 		};
 
-		opp@1200000000,1100 {
+		opp-1200000000-1100 {
 			opp-microvolt = <1100000 1100000 1250000>;
 		};
 
-		opp@1300000000,1000 {
+		opp-1300000000-1000 {
 			opp-microvolt = <1000000 1000000 1250000>;
 		};
 
-		opp@1300000000,1025 {
+		opp-1300000000-1025 {
 			opp-microvolt = <1025000 1025000 1250000>;
 		};
 
-		opp@1300000000,1050 {
+		opp-1300000000-1050 {
 			opp-microvolt = <1050000 1050000 1250000>;
 		};
 
-		opp@1300000000,1075 {
+		opp-1300000000-1075 {
 			opp-microvolt = <1075000 1075000 1250000>;
 		};
 
-		opp@1300000000,1100 {
+		opp-1300000000-1100 {
 			opp-microvolt = <1100000 1100000 1250000>;
 		};
 
-		opp@1300000000,1125 {
+		opp-1300000000-1125 {
 			opp-microvolt = <1125000 1125000 1250000>;
 		};
 
-		opp@1300000000,1150 {
+		opp-1300000000-1150 {
 			opp-microvolt = <1150000 1150000 1250000>;
 		};
 
-		opp@1300000000,1175 {
+		opp-1300000000-1175 {
 			opp-microvolt = <1175000 1175000 1250000>;
 		};
 
-		opp@1400000000,1100 {
+		opp-1400000000-1100 {
 			opp-microvolt = <1100000 1100000 1250000>;
 		};
 
-		opp@1400000000,1125 {
+		opp-1400000000-1125 {
 			opp-microvolt = <1125000 1125000 1250000>;
 		};
 
-		opp@1400000000,1150 {
+		opp-1400000000-1150 {
 			opp-microvolt = <1150000 1150000 1250000>;
 		};
 
-		opp@1400000000,1175 {
+		opp-1400000000-1175 {
 			opp-microvolt = <1175000 1175000 1250000>;
 		};
 
-		opp@1400000000,1237 {
+		opp-1400000000-1237 {
 			opp-microvolt = <1237000 1237000 1250000>;
 		};
 
-		opp@1500000000,1125 {
+		opp-1500000000-1125 {
 			opp-microvolt = <1125000 1125000 1250000>;
 		};
 
-		opp@1500000000,1150 {
+		opp-1500000000-1150 {
 			opp-microvolt = <1150000 1150000 1250000>;
 		};
 
-		opp@1500000000,1200 {
+		opp-1500000000-1200 {
 			opp-microvolt = <1200000 1200000 1250000>;
 		};
 
-		opp@1500000000,1237 {
+		opp-1500000000-1237 {
 			opp-microvolt = <1237000 1237000 1250000>;
 		};
 
-		opp@1600000000,1212 {
+		opp-1600000000-1212 {
 			opp-microvolt = <1212000 1212000 1250000>;
 		};
 
-		opp@1600000000,1237 {
+		opp-1600000000-1237 {
 			opp-microvolt = <1237000 1237000 1250000>;
 		};
 
-		opp@1700000000,1212 {
+		opp-1700000000-1212 {
 			opp-microvolt = <1212000 1212000 1250000>;
 		};
 
-		opp@1700000000,1237 {
+		opp-1700000000-1237 {
 			opp-microvolt = <1237000 1237000 1250000>;
 		};
 	};
diff --git a/dts/src/arm/tegra30-cpu-opp.dtsi b/dts/src/arm/tegra30-cpu-opp.dtsi
index 72f2fe26cc..5b9ebb75a0 100644
--- a/dts/src/arm/tegra30-cpu-opp.dtsi
+++ b/dts/src/arm/tegra30-cpu-opp.dtsi
@@ -1,116 +1,116 @@
 // SPDX-License-Identifier: GPL-2.0
 
 / {
-	cpu0_opp_table: cpu_opp_table0 {
+	cpu0_opp_table: opp-table-cpu0 {
 		compatible = "operating-points-v2";
 		opp-shared;
 
-		opp@51000000,800 {
+		opp-51000000-800 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x1F 0x31FE>;
 			opp-hz = /bits/ 64 <51000000>;
 		};
 
-		opp@51000000,850 {
+		opp-51000000-850 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x1F 0x0C01>;
 			opp-hz = /bits/ 64 <51000000>;
 		};
 
-		opp@51000000,912 {
+		opp-51000000-912 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x1F 0x0200>;
 			opp-hz = /bits/ 64 <51000000>;
 		};
 
-		opp@102000000,800 {
+		opp-102000000-800 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x1F 0x31FE>;
 			opp-hz = /bits/ 64 <102000000>;
 		};
 
-		opp@102000000,850 {
+		opp-102000000-850 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x1F 0x0C01>;
 			opp-hz = /bits/ 64 <102000000>;
 		};
 
-		opp@102000000,912 {
+		opp-102000000-912 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x1F 0x0200>;
 			opp-hz = /bits/ 64 <102000000>;
 		};
 
-		opp@204000000,800 {
+		opp-204000000-800 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x1F 0x31FE>;
 			opp-hz = /bits/ 64 <204000000>;
 			opp-suspend;
 		};
 
-		opp@204000000,850 {
+		opp-204000000-850 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x1F 0x0C01>;
 			opp-hz = /bits/ 64 <204000000>;
 			opp-suspend;
 		};
 
-		opp@204000000,912 {
+		opp-204000000-912 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x1F 0x0200>;
 			opp-hz = /bits/ 64 <204000000>;
 			opp-suspend;
 		};
 
-		opp@312000000,850 {
+		opp-312000000-850 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x1F 0x0C00>;
 			opp-hz = /bits/ 64 <312000000>;
 		};
 
-		opp@312000000,912 {
+		opp-312000000-912 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x1F 0x0200>;
 			opp-hz = /bits/ 64 <312000000>;
 		};
 
-		opp@340000000,800 {
+		opp-340000000-800 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x1F 0x0192>;
 			opp-hz = /bits/ 64 <340000000>;
 		};
 
-		opp@340000000,850 {
+		opp-340000000-850 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x0F 0x0001>;
 			opp-hz = /bits/ 64 <340000000>;
 		};
 
-		opp@370000000,800 {
+		opp-370000000-800 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x1E 0x306C>;
 			opp-hz = /bits/ 64 <370000000>;
 		};
 
-		opp@456000000,850 {
+		opp-456000000-850 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x1F 0x0C00>;
 			opp-hz = /bits/ 64 <456000000>;
 		};
 
-		opp@456000000,912 {
+		opp-456000000-912 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x1F 0x0200>;
 			opp-hz = /bits/ 64 <456000000>;
 		};
 
-		opp@475000000,800 {
+		opp-475000000-800 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x1E 0x31FE>;
 			opp-hz = /bits/ 64 <475000000>;
 		};
 
-		opp@475000000,850 {
+		opp-475000000-850 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x0F 0x0001>, <0x01 0x0002>,
 					   <0x01 0x0010>, <0x01 0x0080>,
@@ -118,25 +118,25 @@
 			opp-hz = /bits/ 64 <475000000>;
 		};
 
-		opp@608000000,850 {
+		opp-608000000-850 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x1F 0x0400>;
 			opp-hz = /bits/ 64 <608000000>;
 		};
 
-		opp@608000000,912 {
+		opp-608000000-912 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x1F 0x0200>;
 			opp-hz = /bits/ 64 <608000000>;
 		};
 
-		opp@620000000,850 {
+		opp-620000000-850 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x1E 0x306C>;
 			opp-hz = /bits/ 64 <620000000>;
 		};
 
-		opp@640000000,850 {
+		opp-640000000-850 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x0F 0x0001>, <0x02 0x0002>,
 					   <0x04 0x0002>, <0x08 0x0002>,
@@ -149,13 +149,13 @@
 			opp-hz = /bits/ 64 <640000000>;
 		};
 
-		opp@640000000,900 {
+		opp-640000000-900 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x01 0x0192>;
 			opp-hz = /bits/ 64 <640000000>;
 		};
 
-		opp@760000000,850 {
+		opp-760000000-850 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x1E 0x3461>, <0x08 0x0002>,
 					   <0x08 0x0004>, <0x08 0x0008>,
@@ -165,7 +165,7 @@
 			opp-hz = /bits/ 64 <760000000>;
 		};
 
-		opp@760000000,900 {
+		opp-760000000-900 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x01 0x0001>, <0x02 0x0002>,
 					   <0x04 0x0002>, <0x02 0x0004>,
@@ -177,37 +177,37 @@
 			opp-hz = /bits/ 64 <760000000>;
 		};
 
-		opp@760000000,912 {
+		opp-760000000-912 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x1F 0x0200>;
 			opp-hz = /bits/ 64 <760000000>;
 		};
 
-		opp@760000000,975 {
+		opp-760000000-975 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x01 0x0192>;
 			opp-hz = /bits/ 64 <760000000>;
 		};
 
-		opp@816000000,850 {
+		opp-816000000-850 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x1F 0x0400>;
 			opp-hz = /bits/ 64 <816000000>;
 		};
 
-		opp@816000000,912 {
+		opp-816000000-912 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x1F 0x0200>;
 			opp-hz = /bits/ 64 <816000000>;
 		};
 
-		opp@860000000,850 {
+		opp-860000000-850 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x0C 0x0001>;
 			opp-hz = /bits/ 64 <860000000>;
 		};
 
-		opp@860000000,900 {
+		opp-860000000-900 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x02 0x0001>, <0x04 0x0002>,
 					   <0x08 0x0002>, <0x04 0x0004>,
@@ -220,7 +220,7 @@
 			opp-hz = /bits/ 64 <860000000>;
 		};
 
-		opp@860000000,975 {
+		opp-860000000-975 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x01 0x0001>, <0x02 0x0002>,
 					   <0x02 0x0004>, <0x02 0x0008>,
@@ -229,25 +229,25 @@
 			opp-hz = /bits/ 64 <860000000>;
 		};
 
-		opp@860000000,1000 {
+		opp-860000000-1000 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x01 0x0192>;
 			opp-hz = /bits/ 64 <860000000>;
 		};
 
-		opp@910000000,900 {
+		opp-910000000-900 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x18 0x3060>;
 			opp-hz = /bits/ 64 <910000000>;
 		};
 
-		opp@1000000000,900 {
+		opp-1000000000-900 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x0C 0x0001>;
 			opp-hz = /bits/ 64 <1000000000>;
 		};
 
-		opp@1000000000,975 {
+		opp-1000000000-975 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x03 0x0001>, <0x04 0x0002>,
 					   <0x08 0x0002>, <0x04 0x0004>,
@@ -260,25 +260,25 @@
 			opp-hz = /bits/ 64 <1000000000>;
 		};
 
-		opp@1000000000,1000 {
+		opp-1000000000-1000 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x02 0x019E>;
 			opp-hz = /bits/ 64 <1000000000>;
 		};
 
-		opp@1000000000,1025 {
+		opp-1000000000-1025 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x01 0x0192>;
 			opp-hz = /bits/ 64 <1000000000>;
 		};
 
-		opp@1100000000,900 {
+		opp-1100000000-900 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x08 0x0001>;
 			opp-hz = /bits/ 64 <1100000000>;
 		};
 
-		opp@1100000000,975 {
+		opp-1100000000-975 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x06 0x0001>, <0x08 0x0002>,
 					   <0x08 0x0004>, <0x08 0x0008>,
@@ -288,7 +288,7 @@
 			opp-hz = /bits/ 64 <1100000000>;
 		};
 
-		opp@1100000000,1000 {
+		opp-1100000000-1000 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x01 0x0001>, <0x04 0x0002>,
 					   <0x04 0x0004>, <0x04 0x0008>,
@@ -297,31 +297,31 @@
 			opp-hz = /bits/ 64 <1100000000>;
 		};
 
-		opp@1100000000,1025 {
+		opp-1100000000-1025 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x02 0x019E>;
 			opp-hz = /bits/ 64 <1100000000>;
 		};
 
-		opp@1100000000,1075 {
+		opp-1100000000-1075 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x01 0x0192>;
 			opp-hz = /bits/ 64 <1100000000>;
 		};
 
-		opp@1150000000,975 {
+		opp-1150000000-975 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x18 0x3060>;
 			opp-hz = /bits/ 64 <1150000000>;
 		};
 
-		opp@1200000000,975 {
+		opp-1200000000-975 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x08 0x0001>;
 			opp-hz = /bits/ 64 <1200000000>;
 		};
 
-		opp@1200000000,1000 {
+		opp-1200000000-1000 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x04 0x0001>, <0x08 0x0002>,
 					   <0x08 0x0004>, <0x08 0x0008>,
@@ -331,7 +331,7 @@
 			opp-hz = /bits/ 64 <1200000000>;
 		};
 
-		opp@1200000000,1025 {
+		opp-1200000000-1025 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x02 0x0001>, <0x04 0x0002>,
 					   <0x04 0x0004>, <0x04 0x0008>,
@@ -340,39 +340,39 @@
 			opp-hz = /bits/ 64 <1200000000>;
 		};
 
-		opp@1200000000,1050 {
+		opp-1200000000-1050 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x02 0x019E>;
 			opp-hz = /bits/ 64 <1200000000>;
 		};
 
-		opp@1200000000,1075 {
+		opp-1200000000-1075 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x01 0x0001>;
 			opp-hz = /bits/ 64 <1200000000>;
 		};
 
-		opp@1200000000,1100 {
+		opp-1200000000-1100 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x01 0x0192>;
 			opp-hz = /bits/ 64 <1200000000>;
 		};
 
-		opp@1300000000,1000 {
+		opp-1300000000-1000 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x08 0x0001>, <0x10 0x0080>,
 					   <0x10 0x0100>;
 			opp-hz = /bits/ 64 <1300000000>;
 		};
 
-		opp@1300000000,1025 {
+		opp-1300000000-1025 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x04 0x0001>, <0x08 0x0002>,
 					   <0x08 0x0080>, <0x08 0x0100>;
 			opp-hz = /bits/ 64 <1300000000>;
 		};
 
-		opp@1300000000,1050 {
+		opp-1300000000-1050 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x12 0x3061>, <0x04 0x0002>,
 					   <0x08 0x0004>, <0x08 0x0008>,
@@ -383,68 +383,68 @@
 			opp-hz = /bits/ 64 <1300000000>;
 		};
 
-		opp@1300000000,1075 {
+		opp-1300000000-1075 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x02 0x0182>, <0x04 0x0004>,
 					   <0x04 0x0008>, <0x04 0x0010>;
 			opp-hz = /bits/ 64 <1300000000>;
 		};
 
-		opp@1300000000,1100 {
+		opp-1300000000-1100 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x02 0x001C>;
 			opp-hz = /bits/ 64 <1300000000>;
 		};
 
-		opp@1300000000,1125 {
+		opp-1300000000-1125 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x01 0x0001>;
 			opp-hz = /bits/ 64 <1300000000>;
 		};
 
-		opp@1300000000,1150 {
+		opp-1300000000-1150 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x01 0x0182>;
 			opp-hz = /bits/ 64 <1300000000>;
 		};
 
-		opp@1300000000,1175 {
+		opp-1300000000-1175 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x01 0x0010>;
 			opp-hz = /bits/ 64 <1300000000>;
 		};
 
-		opp@1400000000,1100 {
+		opp-1400000000-1100 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x18 0x307C>;
 			opp-hz = /bits/ 64 <1400000000>;
 		};
 
-		opp@1400000000,1125 {
+		opp-1400000000-1125 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x04 0x000C>;
 			opp-hz = /bits/ 64 <1400000000>;
 		};
 
-		opp@1400000000,1150 {
+		opp-1400000000-1150 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x02 0x000C>, <0x04 0x0010>;
 			opp-hz = /bits/ 64 <1400000000>;
 		};
 
-		opp@1400000000,1175 {
+		opp-1400000000-1175 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x02 0x0010>;
 			opp-hz = /bits/ 64 <1400000000>;
 		};
 
-		opp@1400000000,1237 {
+		opp-1400000000-1237 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x01 0x0010>;
 			opp-hz = /bits/ 64 <1400000000>;
 		};
 
-		opp@1500000000,1125 {
+		opp-1500000000-1125 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x08 0x0010>, <0x10 0x0020>,
 					   <0x10 0x0040>, <0x10 0x1000>,
@@ -452,7 +452,7 @@
 			opp-hz = /bits/ 64 <1500000000>;
 		};
 
-		opp@1500000000,1150 {
+		opp-1500000000-1150 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x04 0x0010>, <0x08 0x0020>,
 					   <0x08 0x0040>, <0x08 0x1000>,
@@ -460,37 +460,37 @@
 			opp-hz = /bits/ 64 <1500000000>;
 		};
 
-		opp@1500000000,1200 {
+		opp-1500000000-1200 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x02 0x0010>;
 			opp-hz = /bits/ 64 <1500000000>;
 		};
 
-		opp@1500000000,1237 {
+		opp-1500000000-1237 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x01 0x0010>;
 			opp-hz = /bits/ 64 <1500000000>;
 		};
 
-		opp@1600000000,1212 {
+		opp-1600000000-1212 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x10 0x3060>;
 			opp-hz = /bits/ 64 <1600000000>;
 		};
 
-		opp@1600000000,1237 {
+		opp-1600000000-1237 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x08 0x3060>;
 			opp-hz = /bits/ 64 <1600000000>;
 		};
 
-		opp@1700000000,1212 {
+		opp-1700000000-1212 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x10 0x3060>;
 			opp-hz = /bits/ 64 <1700000000>;
 		};
 
-		opp@1700000000,1237 {
+		opp-1700000000-1237 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x08 0x3060>;
 			opp-hz = /bits/ 64 <1700000000>;
diff --git a/dts/src/arm/tegra30-ouya.dts b/dts/src/arm/tegra30-ouya.dts
index 4259871b76..a5cfbab5f5 100644
--- a/dts/src/arm/tegra30-ouya.dts
+++ b/dts/src/arm/tegra30-ouya.dts
@@ -68,22 +68,1936 @@
 		};
 	};
 
-	gpio: gpio@6000d000 {
-		gpio-ranges = <&pinmux 0 0 248>;
-		#reset-cells = <1>;
-	};
-
 	pinmux@70000868 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&state_default>;
+
 		state_default: pinmux {
-			/* located at $state_default below */
+			clk_32k_out_pa0 {
+				nvidia,pins = "clk_32k_out_pa0";
+				nvidia,function = "blink";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			uart3_cts_n_pa1 {
+				nvidia,pins = "uart3_cts_n_pa1";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			dap2_fs_pa2 {
+				nvidia,pins = "dap2_fs_pa2";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			dap2_sclk_pa3 {
+				nvidia,pins = "dap2_sclk_pa3";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			dap2_din_pa4 {
+				nvidia,pins = "dap2_din_pa4";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			dap2_dout_pa5 {
+				nvidia,pins = "dap2_dout_pa5";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			sdmmc3_clk_pa6 {
+				nvidia,pins = "sdmmc3_clk_pa6";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			sdmmc3_cmd_pa7 {
+				nvidia,pins = "sdmmc3_cmd_pa7";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi_a17_pb0 {
+				nvidia,pins = "gmi_a17_pb0";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_a18_pb1 {
+				nvidia,pins = "gmi_a18_pb1";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_pwr0_pb2 {
+				nvidia,pins = "lcd_pwr0_pb2";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_pclk_pb3 {
+				nvidia,pins = "lcd_pclk_pb3";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			sdmmc3_dat3_pb4 {
+				nvidia,pins = "sdmmc3_dat3_pb4";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			sdmmc3_dat2_pb5 {
+				nvidia,pins = "sdmmc3_dat2_pb5";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			sdmmc3_dat1_pb6 {
+				nvidia,pins = "sdmmc3_dat1_pb6";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			sdmmc3_dat0_pb7 {
+				nvidia,pins = "sdmmc3_dat0_pb7";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			uart3_rts_n_pc0 {
+				nvidia,pins = "uart3_rts_n_pc0";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_pwr1_pc1 {
+				nvidia,pins = "lcd_pwr1_pc1";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			uart2_txd_pc2 {
+				nvidia,pins = "uart2_txd_pc2";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			uart2_rxd_pc3 {
+				nvidia,pins = "uart2_rxd_pc3";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gen1_i2c_scl_pc4 {
+				nvidia,pins = "gen1_i2c_scl_pc4";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+
+			gen1_i2c_sda_pc5 {
+				nvidia,pins = "gen1_i2c_sda_pc5";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_pwr2_pc6 {
+				nvidia,pins = "lcd_pwr2_pc6";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_wp_n_pc7 {
+				nvidia,pins = "gmi_wp_n_pc7";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			sdmmc3_dat5_pd0 {
+				nvidia,pins = "sdmmc3_dat5_pd0";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			sdmmc3_dat4_pd1 {
+				nvidia,pins = "sdmmc3_dat4_pd1";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			lcd_dc1_pd2 {
+				nvidia,pins = "lcd_dc1_pd2";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			sdmmc3_dat6_pd3 {
+				nvidia,pins = "sdmmc3_dat6_pd3";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			sdmmc3_dat7_pd4 {
+				nvidia,pins = "sdmmc3_dat7_pd4";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			vi_d1_pd5 {
+				nvidia,pins = "vi_d1_pd5";
+				nvidia,function = "sdmmc2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			vi_vsync_pd6 {
+				nvidia,pins = "vi_vsync_pd6";
+				nvidia,function = "ddr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			vi_hsync_pd7 {
+				nvidia,pins = "vi_hsync_pd7";
+				nvidia,function = "ddr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			lcd_d0_pe0 {
+				nvidia,pins = "lcd_d0_pe0";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_d1_pe1 {
+				nvidia,pins = "lcd_d1_pe1";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_d2_pe2 {
+				nvidia,pins = "lcd_d2_pe2";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_d3_pe3 {
+				nvidia,pins = "lcd_d3_pe3";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_d4_pe4 {
+				nvidia,pins = "lcd_d4_pe4";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_d5_pe5 {
+				nvidia,pins = "lcd_d5_pe5";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_d6_pe6 {
+				nvidia,pins = "lcd_d6_pe6";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_d7_pe7 {
+				nvidia,pins = "lcd_d7_pe7";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_d8_pf0 {
+				nvidia,pins = "lcd_d8_pf0";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_d9_pf1 {
+				nvidia,pins = "lcd_d9_pf1";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_d10_pf2 {
+				nvidia,pins = "lcd_d10_pf2";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_d11_pf3 {
+				nvidia,pins = "lcd_d11_pf3";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_d12_pf4 {
+				nvidia,pins = "lcd_d12_pf4";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_d13_pf5 {
+				nvidia,pins = "lcd_d13_pf5";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_d14_pf6 {
+				nvidia,pins = "lcd_d14_pf6";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_d15_pf7 {
+				nvidia,pins = "lcd_d15_pf7";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_ad0_pg0 {
+				nvidia,pins = "gmi_ad0_pg0";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi_ad1_pg1 {
+				nvidia,pins = "gmi_ad1_pg1";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_ad2_pg2 {
+				nvidia,pins = "gmi_ad2_pg2";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi_ad3_pg3 {
+				nvidia,pins = "gmi_ad3_pg3";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi_ad4_pg4 {
+				nvidia,pins = "gmi_ad4_pg4";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi_ad5_pg5 {
+				nvidia,pins = "gmi_ad5_pg5";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi_ad6_pg6 {
+				nvidia,pins = "gmi_ad6_pg6";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi_ad7_pg7 {
+				nvidia,pins = "gmi_ad7_pg7";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi_ad8_ph0 {
+				nvidia,pins = "gmi_ad8_ph0";
+				nvidia,function = "pwm0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_ad9_ph1 {
+				nvidia,pins = "gmi_ad9_ph1";
+				nvidia,function = "pwm1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_ad10_ph2 {
+				nvidia,pins = "gmi_ad10_ph2";
+				nvidia,function = "pwm2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_ad11_ph3 {
+				nvidia,pins = "gmi_ad11_ph3";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_ad12_ph4 {
+				nvidia,pins = "gmi_ad12_ph4";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_ad13_ph5 {
+				nvidia,pins = "gmi_ad13_ph5";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_ad14_ph6 {
+				nvidia,pins = "gmi_ad14_ph6";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_wr_n_pi0 {
+				nvidia,pins = "gmi_wr_n_pi0";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_oe_n_pi1 {
+				nvidia,pins = "gmi_oe_n_pi1";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_dqs_pi2 {
+				nvidia,pins = "gmi_dqs_pi2";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_iordy_pi5 {
+				nvidia,pins = "gmi_iordy_pi5";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_cs7_n_pi6 {
+				nvidia,pins = "gmi_cs7_n_pi6";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_wait_pi7 {
+				nvidia,pins = "gmi_wait_pi7";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_de_pj1 {
+				nvidia,pins = "lcd_de_pj1";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_cs1_n_pj2 {
+				nvidia,pins = "gmi_cs1_n_pj2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_hsync_pj3 {
+				nvidia,pins = "lcd_hsync_pj3";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_vsync_pj4 {
+				nvidia,pins = "lcd_vsync_pj4";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			uart2_cts_n_pj5 {
+				nvidia,pins = "uart2_cts_n_pj5";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			uart2_rts_n_pj6 {
+				nvidia,pins = "uart2_rts_n_pj6";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_a16_pj7 {
+				nvidia,pins = "gmi_a16_pj7";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_adv_n_pk0 {
+				nvidia,pins = "gmi_adv_n_pk0";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_clk_pk1 {
+				nvidia,pins = "gmi_clk_pk1";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_cs2_n_pk3 {
+				nvidia,pins = "gmi_cs2_n_pk3";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_cs3_n_pk4 {
+				nvidia,pins = "gmi_cs3_n_pk4";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			spdif_out_pk5 {
+				nvidia,pins = "spdif_out_pk5";
+				nvidia,function = "spdif";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			spdif_in_pk6 {
+				nvidia,pins = "spdif_in_pk6";
+				nvidia,function = "spdif";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi_a19_pk7 {
+				nvidia,pins = "gmi_a19_pk7";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			vi_d2_pl0 {
+				nvidia,pins = "vi_d2_pl0";
+				nvidia,function = "sdmmc2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			vi_d3_pl1 {
+				nvidia,pins = "vi_d3_pl1";
+				nvidia,function = "sdmmc2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			vi_d4_pl2 {
+				nvidia,pins = "vi_d4_pl2";
+				nvidia,function = "vi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			vi_d5_pl3 {
+				nvidia,pins = "vi_d5_pl3";
+				nvidia,function = "sdmmc2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			vi_d6_pl4 {
+				nvidia,pins = "vi_d6_pl4";
+				nvidia,function = "vi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			vi_d7_pl5 {
+				nvidia,pins = "vi_d7_pl5";
+				nvidia,function = "sdmmc2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			vi_d8_pl6 {
+				nvidia,pins = "vi_d8_pl6";
+				nvidia,function = "sdmmc2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			vi_d9_pl7 {
+				nvidia,pins = "vi_d9_pl7";
+				nvidia,function = "sdmmc2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_d16_pm0 {
+				nvidia,pins = "lcd_d16_pm0";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_d17_pm1 {
+				nvidia,pins = "lcd_d17_pm1";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_d18_pm2 {
+				nvidia,pins = "lcd_d18_pm2";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_d19_pm3 {
+				nvidia,pins = "lcd_d19_pm3";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_d20_pm4 {
+				nvidia,pins = "lcd_d20_pm4";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_d21_pm5 {
+				nvidia,pins = "lcd_d21_pm5";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_d22_pm6 {
+				nvidia,pins = "lcd_d22_pm6";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_d23_pm7 {
+				nvidia,pins = "lcd_d23_pm7";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			dap1_fs_pn0 {
+				nvidia,pins = "dap1_fs_pn0";
+				nvidia,function = "i2s0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			dap1_din_pn1 {
+				nvidia,pins = "dap1_din_pn1";
+				nvidia,function = "i2s0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			dap1_dout_pn2 {
+				nvidia,pins = "dap1_dout_pn2";
+				nvidia,function = "i2s0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			dap1_sclk_pn3 {
+				nvidia,pins = "dap1_sclk_pn3";
+				nvidia,function = "i2s0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			lcd_cs0_n_pn4 {
+				nvidia,pins = "lcd_cs0_n_pn4";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_sdout_pn5 {
+				nvidia,pins = "lcd_sdout_pn5";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_dc0_pn6 {
+				nvidia,pins = "lcd_dc0_pn6";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			hdmi_int_pn7 {
+				nvidia,pins = "hdmi_int_pn7";
+				nvidia,function = "hdmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			ulpi_data7_po0 {
+				nvidia,pins = "ulpi_data7_po0";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			ulpi_data0_po1 {
+				nvidia,pins = "ulpi_data0_po1";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			ulpi_data1_po2 {
+				nvidia,pins = "ulpi_data1_po2";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			ulpi_data2_po3 {
+				nvidia,pins = "ulpi_data2_po3";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			ulpi_data3_po4 {
+				nvidia,pins = "ulpi_data3_po4";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			ulpi_data4_po5 {
+				nvidia,pins = "ulpi_data4_po5";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			ulpi_data5_po6 {
+				nvidia,pins = "ulpi_data5_po6";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			ulpi_data6_po7 {
+				nvidia,pins = "ulpi_data6_po7";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			dap3_fs_pp0 {
+				nvidia,pins = "dap3_fs_pp0";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			dap3_din_pp1 {
+				nvidia,pins = "dap3_din_pp1";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			dap3_dout_pp2 {
+				nvidia,pins = "dap3_dout_pp2";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			dap3_sclk_pp3 {
+				nvidia,pins = "dap3_sclk_pp3";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			dap4_fs_pp4 {
+				nvidia,pins = "dap4_fs_pp4";
+				nvidia,function = "i2s3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			dap4_din_pp5 {
+				nvidia,pins = "dap4_din_pp5";
+				nvidia,function = "i2s3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			dap4_dout_pp6 {
+				nvidia,pins = "dap4_dout_pp6";
+				nvidia,function = "i2s3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			dap4_sclk_pp7 {
+				nvidia,pins = "dap4_sclk_pp7";
+				nvidia,function = "i2s3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			kb_col0_pq0 {
+				nvidia,pins = "kb_col0_pq0";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			kb_col1_pq1 {
+				nvidia,pins = "kb_col1_pq1";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			kb_col2_pq2 {
+				nvidia,pins = "kb_col2_pq2";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			kb_col3_pq3 {
+				nvidia,pins = "kb_col3_pq3";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			kb_col4_pq4 {
+				nvidia,pins = "kb_col4_pq4";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			kb_col5_pq5 {
+				nvidia,pins = "kb_col5_pq5";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			kb_col6_pq6 {
+				nvidia,pins = "kb_col6_pq6";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			kb_col7_pq7 {
+				nvidia,pins = "kb_col7_pq7";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			kb_row0_pr0 {
+				nvidia,pins = "kb_row0_pr0";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			kb_row1_pr1 {
+				nvidia,pins = "kb_row1_pr1";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			kb_row2_pr2 {
+				nvidia,pins = "kb_row2_pr2";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			kb_row3_pr3 {
+				nvidia,pins = "kb_row3_pr3";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			kb_row4_pr4 {
+				nvidia,pins = "kb_row4_pr4";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			kb_row5_pr5 {
+				nvidia,pins = "kb_row5_pr5";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			kb_row6_pr6 {
+				nvidia,pins = "kb_row6_pr6";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			kb_row7_pr7 {
+				nvidia,pins = "kb_row7_pr7";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			kb_row8_ps0 {
+				nvidia,pins = "kb_row8_ps0";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			kb_row9_ps1 {
+				nvidia,pins = "kb_row9_ps1";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			kb_row10_ps2 {
+				nvidia,pins = "kb_row10_ps2";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			kb_row11_ps3 {
+				nvidia,pins = "kb_row11_ps3";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			kb_row12_ps4 {
+				nvidia,pins = "kb_row12_ps4";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			kb_row13_ps5 {
+				nvidia,pins = "kb_row13_ps5";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			kb_row14_ps6 {
+				nvidia,pins = "kb_row14_ps6";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			kb_row15_ps7 {
+				nvidia,pins = "kb_row15_ps7";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			vi_pclk_pt0 {
+				nvidia,pins = "vi_pclk_pt0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			vi_mclk_pt1 {
+				nvidia,pins = "vi_mclk_pt1";
+				nvidia,function = "vi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			vi_d10_pt2 {
+				nvidia,pins = "vi_d10_pt2";
+				nvidia,function = "ddr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			vi_d11_pt3 {
+				nvidia,pins = "vi_d11_pt3";
+				nvidia,function = "ddr";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			vi_d0_pt4 {
+				nvidia,pins = "vi_d0_pt4";
+				nvidia,function = "ddr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gen2_i2c_scl_pt5 {
+				nvidia,pins = "gen2_i2c_scl_pt5";
+				nvidia,function = "i2c2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+
+			gen2_i2c_sda_pt6 {
+				nvidia,pins = "gen2_i2c_sda_pt6";
+				nvidia,function = "i2c2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+
+			sdmmc4_cmd_pt7 {
+				nvidia,pins = "sdmmc4_cmd_pt7";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,io-reset = <TEGRA_PIN_DISABLE>;
+			};
+
+			pu0 {
+				nvidia,pins = "pu0";
+				nvidia,function = "owr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pu1 {
+				nvidia,pins = "pu1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pu2 {
+				nvidia,pins = "pu2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pu3 {
+				nvidia,pins = "pu3";
+				nvidia,function = "pwm0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pu4 {
+				nvidia,pins = "pu4";
+				nvidia,function = "pwm1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pu5 {
+				nvidia,pins = "pu5";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pu6 {
+				nvidia,pins = "pu6";
+				nvidia,function = "pwm3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			jtag_rtck_pu7 {
+				nvidia,pins = "jtag_rtck_pu7";
+				nvidia,function = "rtck";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pv0 {
+				nvidia,pins = "pv0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pv1 {
+				nvidia,pins = "pv1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pv2 {
+				nvidia,pins = "pv2";
+				nvidia,function = "owr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pv3 {
+				nvidia,pins = "pv3";
+				nvidia,function = "clk_12m_out";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			ddc_scl_pv4 {
+				nvidia,pins = "ddc_scl_pv4";
+				nvidia,function = "i2c4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			ddc_sda_pv5 {
+				nvidia,pins = "ddc_sda_pv5";
+				nvidia,function = "i2c4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			crt_hsync_pv6 {
+				nvidia,pins = "crt_hsync_pv6";
+				nvidia,function = "crt";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			crt_vsync_pv7 {
+				nvidia,pins = "crt_vsync_pv7";
+				nvidia,function = "crt";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_cs1_n_pw0 {
+				nvidia,pins = "lcd_cs1_n_pw0";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_m1_pw1 {
+				nvidia,pins = "lcd_m1_pw1";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			spi2_cs1_n_pw2 {
+				nvidia,pins = "spi2_cs1_n_pw2";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			clk1_out_pw4 {
+				nvidia,pins = "clk1_out_pw4";
+				nvidia,function = "extperiph1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			clk2_out_pw5 {
+				nvidia,pins = "clk2_out_pw5";
+				nvidia,function = "extperiph2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			uart3_txd_pw6 {
+				nvidia,pins = "uart3_txd_pw6";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			uart3_rxd_pw7 {
+				nvidia,pins = "uart3_rxd_pw7";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			spi2_sck_px2 {
+				nvidia,pins = "spi2_sck_px2";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			spi1_mosi_px4 {
+				nvidia,pins = "spi1_mosi_px4";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			spi1_sck_px5 {
+				nvidia,pins = "spi1_sck_px5";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			spi1_cs0_n_px6 {
+				nvidia,pins = "spi1_cs0_n_px6";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			spi1_miso_px7 {
+				nvidia,pins = "spi1_miso_px7";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			ulpi_clk_py0 {
+				nvidia,pins = "ulpi_clk_py0";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			ulpi_dir_py1 {
+				nvidia,pins = "ulpi_dir_py1";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			ulpi_nxt_py2 {
+				nvidia,pins = "ulpi_nxt_py2";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			ulpi_stp_py3 {
+				nvidia,pins = "ulpi_stp_py3";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			sdmmc1_dat3_py4 {
+				nvidia,pins = "sdmmc1_dat3_py4";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			sdmmc1_dat2_py5 {
+				nvidia,pins = "sdmmc1_dat2_py5";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			sdmmc1_dat1_py6 {
+				nvidia,pins = "sdmmc1_dat1_py6";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			sdmmc1_dat0_py7 {
+				nvidia,pins = "sdmmc1_dat0_py7";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			sdmmc1_clk_pz0 {
+				nvidia,pins = "sdmmc1_clk_pz0";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			sdmmc1_cmd_pz1 {
+				nvidia,pins = "sdmmc1_cmd_pz1";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_sdin_pz2 {
+				nvidia,pins = "lcd_sdin_pz2";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_wr_n_pz3 {
+				nvidia,pins = "lcd_wr_n_pz3";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_sck_pz4 {
+				nvidia,pins = "lcd_sck_pz4";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			sys_clk_req_pz5 {
+				nvidia,pins = "sys_clk_req_pz5";
+				nvidia,function = "sysclk";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pwr_i2c_scl_pz6 {
+				nvidia,pins = "pwr_i2c_scl_pz6";
+				nvidia,function = "i2cpwr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+
+			pwr_i2c_sda_pz7 {
+				nvidia,pins = "pwr_i2c_sda_pz7";
+				nvidia,function = "i2cpwr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+
+			sdmmc4_dat0_paa0 {
+				nvidia,pins = "sdmmc4_dat0_paa0";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,io-reset = <TEGRA_PIN_DISABLE>;
+			};
+
+			sdmmc4_dat1_paa1 {
+				nvidia,pins = "sdmmc4_dat1_paa1";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,io-reset = <TEGRA_PIN_DISABLE>;
+			};
+
+			sdmmc4_dat2_paa2 {
+				nvidia,pins = "sdmmc4_dat2_paa2";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,io-reset = <TEGRA_PIN_DISABLE>;
+			};
+
+			sdmmc4_dat3_paa3 {
+				nvidia,pins = "sdmmc4_dat3_paa3";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,io-reset = <TEGRA_PIN_DISABLE>;
+			};
+
+			sdmmc4_dat4_paa4 {
+				nvidia,pins = "sdmmc4_dat4_paa4";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,io-reset = <TEGRA_PIN_DISABLE>;
+			};
+
+			sdmmc4_dat5_paa5 {
+				nvidia,pins = "sdmmc4_dat5_paa5";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,io-reset = <TEGRA_PIN_DISABLE>;
+			};
+
+			sdmmc4_dat6_paa6 {
+				nvidia,pins = "sdmmc4_dat6_paa6";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,io-reset = <TEGRA_PIN_DISABLE>;
+			};
+
+			sdmmc4_dat7_paa7 {
+				nvidia,pins = "sdmmc4_dat7_paa7";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,io-reset = <TEGRA_PIN_DISABLE>;
+			};
+
+			pbb0 {
+				nvidia,pins = "pbb0";
+				nvidia,function = "i2s4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			cam_i2c_scl_pbb1 {
+				nvidia,pins = "cam_i2c_scl_pbb1";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+
+			cam_i2c_sda_pbb2 {
+				nvidia,pins = "cam_i2c_sda_pbb2";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+
+			pbb3 {
+				nvidia,pins = "pbb3";
+				nvidia,function = "vgp3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pbb4 {
+				nvidia,pins = "pbb4";
+				nvidia,function = "vgp4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pbb5 {
+				nvidia,pins = "pbb5";
+				nvidia,function = "vgp5";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pbb6 {
+				nvidia,pins = "pbb6";
+				nvidia,function = "vgp6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pbb7 {
+				nvidia,pins = "pbb7";
+				nvidia,function = "i2s4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			cam_mclk_pcc0 {
+				nvidia,pins = "cam_mclk_pcc0";
+				nvidia,function = "vi_alt3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pcc1 {
+				nvidia,pins = "pcc1";
+				nvidia,function = "i2s4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pcc2 {
+				nvidia,pins = "pcc2";
+				nvidia,function = "i2s4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			sdmmc4_rst_n_pcc3 {
+				nvidia,pins = "sdmmc4_rst_n_pcc3";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,io-reset = <TEGRA_PIN_DISABLE>;
+			};
+
+			sdmmc4_clk_pcc4 {
+				nvidia,pins = "sdmmc4_clk_pcc4";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,io-reset = <TEGRA_PIN_DISABLE>;
+			};
+
+			clk2_req_pcc5 {
+				nvidia,pins = "clk2_req_pcc5";
+				nvidia,function = "dap";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pex_l2_rst_n_pcc6 {
+				nvidia,pins = "pex_l2_rst_n_pcc6";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pex_l2_clkreq_n_pcc7 {
+				nvidia,pins = "pex_l2_clkreq_n_pcc7";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pex_l0_prsnt_n_pdd0 {
+				nvidia,pins = "pex_l0_prsnt_n_pdd0";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pex_l0_rst_n_pdd1 {
+				nvidia,pins = "pex_l0_rst_n_pdd1";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pex_l0_clkreq_n_pdd2 {
+				nvidia,pins = "pex_l0_clkreq_n_pdd2";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pex_wake_n_pdd3 {
+				nvidia,pins = "pex_wake_n_pdd3";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pex_l1_prsnt_n_pdd4 {
+				nvidia,pins = "pex_l1_prsnt_n_pdd4";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pex_l1_rst_n_pdd5 {
+				nvidia,pins = "pex_l1_rst_n_pdd5";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pex_l1_clkreq_n_pdd6 {
+				nvidia,pins = "pex_l1_clkreq_n_pdd6";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pex_l2_prsnt_n_pdd7 {
+				nvidia,pins = "pex_l2_prsnt_n_pdd7";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			clk3_out_pee0 {
+				nvidia,pins = "clk3_out_pee0";
+				nvidia,function = "extperiph3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			clk3_req_pee1 {
+				nvidia,pins = "clk3_req_pee1";
+				nvidia,function = "dev3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			clk1_req_pee2 {
+				nvidia,pins = "clk1_req_pee2";
+				nvidia,function = "dap";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			hdmi_cec_pee3 {
+				nvidia,pins = "hdmi_cec_pee3";
+				nvidia,function = "cec";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+
+			owr {
+				nvidia,pins = "owr";
+				nvidia,function = "owr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			drive_groups {
+				nvidia,pins = "drive_gma",
+					      "drive_gmb",
+					      "drive_gmc",
+					      "drive_gmd";
+				nvidia,pull-down-strength = <9>;
+				nvidia,pull-up-strength = <9>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+			};
 		};
 	};
 
 	uartc: serial@70006200 {
-		status = "okay";
 		compatible = "nvidia,tegra30-hsuart";
+		/delete-property/ reg-shift;
+		status = "okay";
 
 		nvidia,adjust-baud-rates = <0 9600 100>,
 					   <9600 115200 200>,
@@ -277,14 +2191,2294 @@
 		nvidia,core-pwr-off-time = <458>;
 		nvidia,core-power-req-active-high;
 		nvidia,sys-clock-req-active-high;
+		core-supply = <&vdd_core>;
 	};
 
-	mc_timings: memory-controller@7000f000 {
-		/* timings located at &mc_timings below */
+	memory-controller@7000f000 {
+		emc-timings-0 {
+			nvidia,ram-code = <0>; /* Samsung RAM */
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+				nvidia,emem-configuration = <
+					0x00030003 /* MC_EMEM_ARB_CFG */
+					0xc0000010 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000001 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000001 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06020102 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0502 /* MC_EMEM_ARB_DA_COVERS */
+					0x75830303 /* MC_EMEM_ARB_MISC0 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+				nvidia,emem-configuration = <
+					0x00010003 /* MC_EMEM_ARB_CFG */
+					0xc0000010 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000001 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000001 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06020102 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0502 /* MC_EMEM_ARB_DA_COVERS */
+					0x74630303 /* MC_EMEM_ARB_MISC0 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+				nvidia,emem-configuration = <
+					0x00000003 /* MC_EMEM_ARB_CFG */
+					0xc0000018 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000001 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06020102 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0503 /* MC_EMEM_ARB_DA_COVERS */
+					0x73c30504 /* MC_EMEM_ARB_MISC0 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+				nvidia,emem-configuration = <
+					0x00000006 /* MC_EMEM_ARB_CFG */
+					0xc0000025 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000005 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000004 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000001 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06020102 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0505 /* MC_EMEM_ARB_DA_COVERS */
+					0x73840a06 /* MC_EMEM_ARB_MISC0 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-400000000 {
+				clock-frequency = <400000000>;
+				nvidia,emem-configuration = <
+					0x0000000c /* MC_EMEM_ARB_CFG */
+					0xc0000048 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000009 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000005 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000007 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06030202 /* MC_EMEM_ARB_DA_TURNS */
+					0x000d0709 /* MC_EMEM_ARB_DA_COVERS */
+					0x7086120a /* MC_EMEM_ARB_MISC0 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-800000000 {
+				clock-frequency = <800000000>;
+				nvidia,emem-configuration = <
+					0x00000018 /* MC_EMEM_ARB_CFG */
+					0xc0000090 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000004 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000005 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000013 /* MC_EMEM_ARB_TIMING_RC */
+					0x0000000c /* MC_EMEM_ARB_TIMING_RAS */
+					0x0000000f /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x0000000c /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000004 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000008 /* MC_EMEM_ARB_TIMING_W2R */
+					0x08040202 /* MC_EMEM_ARB_DA_TURNS */
+					0x00160d13 /* MC_EMEM_ARB_DA_COVERS */
+					0x712c2414 /* MC_EMEM_ARB_MISC0 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+		};
+
+		emc-timings-1 {
+			nvidia,ram-code = <1>; /* Hynix M RAM */
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+				nvidia,emem-configuration = <
+					0x00030003 /* MC_EMEM_ARB_CFG */
+					0xc0000010 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000001 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000001 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06020102 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0502 /* MC_EMEM_ARB_DA_COVERS */
+					0x75830303 /* MC_EMEM_ARB_MISC0 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+				nvidia,emem-configuration = <
+					0x00010003 /* MC_EMEM_ARB_CFG */
+					0xc0000010 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000001 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000001 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06020102 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0502 /* MC_EMEM_ARB_DA_COVERS */
+					0x74630303 /* MC_EMEM_ARB_MISC0 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+				nvidia,emem-configuration = <
+					0x00000003 /* MC_EMEM_ARB_CFG */
+					0xc0000018 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000001 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06020102 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0503 /* MC_EMEM_ARB_DA_COVERS */
+					0x73c30504 /* MC_EMEM_ARB_MISC0 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+				nvidia,emem-configuration = <
+					0x00000006 /* MC_EMEM_ARB_CFG */
+					0xc0000025 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000005 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000004 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000001 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06020102 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0505 /* MC_EMEM_ARB_DA_COVERS */
+					0x73840a06 /* MC_EMEM_ARB_MISC0 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-400000000 {
+				clock-frequency = <400000000>;
+				nvidia,emem-configuration = <
+					0x0000000c /* MC_EMEM_ARB_CFG */
+					0xc0000048 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000009 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000005 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000007 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06030202 /* MC_EMEM_ARB_DA_TURNS */
+					0x000d0709 /* MC_EMEM_ARB_DA_COVERS */
+					0x7086120a /* MC_EMEM_ARB_MISC0 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-800000000 {
+				clock-frequency = <800000000>;
+				nvidia,emem-configuration = <
+					0x00000018 /* MC_EMEM_ARB_CFG */
+					0xc0000090 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000004 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000005 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000013 /* MC_EMEM_ARB_TIMING_RC */
+					0x0000000c /* MC_EMEM_ARB_TIMING_RAS */
+					0x0000000f /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x0000000c /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000004 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000008 /* MC_EMEM_ARB_TIMING_W2R */
+					0x08040202 /* MC_EMEM_ARB_DA_TURNS */
+					0x00160d13 /* MC_EMEM_ARB_DA_COVERS */
+					0x712c2414 /* MC_EMEM_ARB_MISC0 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+		};
+
+		emc-timings-2 {
+			nvidia,ram-code = <2>; /* Hynix A RAM */
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+				nvidia,emem-configuration = <
+					0x00030003 /* MC_EMEM_ARB_CFG */
+					0xc0000010 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000001 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000001 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06020102 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0502 /* MC_EMEM_ARB_DA_COVERS */
+					0x75e30303 /* MC_EMEM_ARB_MISC0 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+				nvidia,emem-configuration = <
+					0x00010003 /* MC_EMEM_ARB_CFG */
+					0xc0000010 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000001 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000001 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06020102 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0502 /* MC_EMEM_ARB_DA_COVERS */
+					0x74e30303 /* MC_EMEM_ARB_MISC0 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+				nvidia,emem-configuration = <
+					0x00000003 /* MC_EMEM_ARB_CFG */
+					0xc0000018 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000001 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06020102 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0503 /* MC_EMEM_ARB_DA_COVERS */
+					0x74430504 /* MC_EMEM_ARB_MISC0 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+				nvidia,emem-configuration = <
+					0x00000006 /* MC_EMEM_ARB_CFG */
+					0xc0000025 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000005 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000004 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000001 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06020102 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0505 /* MC_EMEM_ARB_DA_COVERS */
+					0x74040a06 /* MC_EMEM_ARB_MISC0 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-400000000 {
+				clock-frequency = <400000000>;
+				nvidia,emem-configuration = <
+					0x0000000c /* MC_EMEM_ARB_CFG */
+					0xc0000048 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000009 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000005 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000007 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06030202 /* MC_EMEM_ARB_DA_TURNS */
+					0x000d0709 /* MC_EMEM_ARB_DA_COVERS */
+					0x7086120a /* MC_EMEM_ARB_MISC0 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-800000000 {
+				clock-frequency = <800000000>;
+				nvidia,emem-configuration = <
+					0x00000018 /* MC_EMEM_ARB_CFG */
+					0xc0000090 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000004 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000005 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000013 /* MC_EMEM_ARB_TIMING_RC */
+					0x0000000c /* MC_EMEM_ARB_TIMING_RAS */
+					0x0000000f /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x0000000c /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000004 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000008 /* MC_EMEM_ARB_TIMING_W2R */
+					0x08040202 /* MC_EMEM_ARB_DA_TURNS */
+					0x00160d13 /* MC_EMEM_ARB_DA_COVERS */
+					0x712c2414 /* MC_EMEM_ARB_MISC0 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+		};
 	};
 
-	emc_timings: memory-controller@7000f400 {
-		/* timings located at &emc_timings below */
+	memory-controller@7000f400 {
+		emc-timings-0 {
+			nvidia,ram-code = <0>;  /* Samsung RAM */
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-configuration = <
+					0x00000001 /* EMC_RC */
+					0x00000006 /* EMC_RFC */
+					0x00000000 /* EMC_RAS */
+					0x00000000 /* EMC_RP */
+					0x00000002 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000005 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000000 /* EMC_RD_RCD */
+					0x00000000 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000005 /* EMC_WDV */
+					0x00000005 /* EMC_QUSE */
+					0x00000004 /* EMC_QRST */
+					0x0000000a /* EMC_QSAFE */
+					0x0000000b /* EMC_RDV */
+					0x000000c0 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000030 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000007 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x00000007 /* EMC_TXSR */
+					0x00000007 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000002 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000004 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x000000c7 /* EMC_TREFBW */
+					0x00000006 /* EMC_QUSE_EXTRA */
+					0x00000004 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00004288 /* EMC_FBIO_CFG5 */
+					0x007800a4 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x000fc000 /* EMC_DLL_XFORM_DQS0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS3 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS4 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS5 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS6 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS7 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0800211c /* EMC_XM2DQSPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f108 /* EMC_XM2COMPPADCTRL */
+					0x05057404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
+					0x08000168 /* EMC_XM2QUSEPADCTRL */
+					0x08000000 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00000000 /* EMC_ZCAL_INTERVAL */
+					0x00000040 /* EMC_ZCAL_WAIT_CNT */
+					0x000c000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x80000287 /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff00 /* EMC_CFG_RSV */
+				>;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-configuration = <
+					0x00000002 /* EMC_RC */
+					0x0000000d /* EMC_RFC */
+					0x00000001 /* EMC_RAS */
+					0x00000000 /* EMC_RP */
+					0x00000002 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000005 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000000 /* EMC_RD_RCD */
+					0x00000000 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000005 /* EMC_WDV */
+					0x00000005 /* EMC_QUSE */
+					0x00000004 /* EMC_QRST */
+					0x0000000a /* EMC_QSAFE */
+					0x0000000b /* EMC_RDV */
+					0x00000181 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000060 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000007 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x0000000e /* EMC_TXSR */
+					0x0000000e /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000003 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000004 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x0000018e /* EMC_TREFBW */
+					0x00000006 /* EMC_QUSE_EXTRA */
+					0x00000004 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00004288 /* EMC_FBIO_CFG5 */
+					0x007800a4 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x000fc000 /* EMC_DLL_XFORM_DQS0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS3 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS4 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS5 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS6 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS7 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0800211c /* EMC_XM2DQSPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f108 /* EMC_XM2COMPPADCTRL */
+					0x05057404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
+					0x08000168 /* EMC_XM2QUSEPADCTRL */
+					0x08000000 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00000000 /* EMC_ZCAL_INTERVAL */
+					0x00000040 /* EMC_ZCAL_WAIT_CNT */
+					0x000c000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x8000040b /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff00 /* EMC_CFG_RSV */
+				>;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-configuration = <
+					0x00000004 /* EMC_RC */
+					0x0000001a /* EMC_RFC */
+					0x00000003 /* EMC_RAS */
+					0x00000001 /* EMC_RP */
+					0x00000002 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000005 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000001 /* EMC_RD_RCD */
+					0x00000001 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000005 /* EMC_WDV */
+					0x00000005 /* EMC_QUSE */
+					0x00000004 /* EMC_QRST */
+					0x0000000a /* EMC_QSAFE */
+					0x0000000b /* EMC_RDV */
+					0x00000303 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x000000c0 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000007 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x0000001c /* EMC_TXSR */
+					0x0000001c /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000005 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000004 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x0000031c /* EMC_TREFBW */
+					0x00000006 /* EMC_QUSE_EXTRA */
+					0x00000004 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00004288 /* EMC_FBIO_CFG5 */
+					0x007800a4 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x000fc000 /* EMC_DLL_XFORM_DQS0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS3 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS4 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS5 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS6 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS7 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0800211c /* EMC_XM2DQSPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f108 /* EMC_XM2COMPPADCTRL */
+					0x05057404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
+					0x08000168 /* EMC_XM2QUSEPADCTRL */
+					0x08000000 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00000000 /* EMC_ZCAL_INTERVAL */
+					0x00000040 /* EMC_ZCAL_WAIT_CNT */
+					0x000c000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x80000713 /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff00 /* EMC_CFG_RSV */
+				>;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-configuration = <
+					0x00000009 /* EMC_RC */
+					0x00000035 /* EMC_RFC */
+					0x00000007 /* EMC_RAS */
+					0x00000002 /* EMC_RP */
+					0x00000002 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000005 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000002 /* EMC_RD_RCD */
+					0x00000002 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000005 /* EMC_WDV */
+					0x00000005 /* EMC_QUSE */
+					0x00000004 /* EMC_QRST */
+					0x0000000a /* EMC_QSAFE */
+					0x0000000b /* EMC_RDV */
+					0x00000607 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000181 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000007 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x00000038 /* EMC_TXSR */
+					0x00000038 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000009 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000004 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x00000638 /* EMC_TREFBW */
+					0x00000006 /* EMC_QUSE_EXTRA */
+					0x00000006 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00004288 /* EMC_FBIO_CFG5 */
+					0x004400a4 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x00080000 /* EMC_DLL_XFORM_DQS0 */
+					0x00080000 /* EMC_DLL_XFORM_DQS1 */
+					0x00080000 /* EMC_DLL_XFORM_DQS2 */
+					0x00080000 /* EMC_DLL_XFORM_DQS3 */
+					0x00080000 /* EMC_DLL_XFORM_DQS4 */
+					0x00080000 /* EMC_DLL_XFORM_DQS5 */
+					0x00080000 /* EMC_DLL_XFORM_DQS6 */
+					0x00080000 /* EMC_DLL_XFORM_DQS7 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x00080000 /* EMC_DLL_XFORM_DQ0 */
+					0x00080000 /* EMC_DLL_XFORM_DQ1 */
+					0x00080000 /* EMC_DLL_XFORM_DQ2 */
+					0x00080000 /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0800211c /* EMC_XM2DQSPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f108 /* EMC_XM2COMPPADCTRL */
+					0x05057404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
+					0x08000168 /* EMC_XM2QUSEPADCTRL */
+					0x08000000 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00020000 /* EMC_ZCAL_INTERVAL */
+					0x00000100 /* EMC_ZCAL_WAIT_CNT */
+					0x000c000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x80000d22 /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff00 /* EMC_CFG_RSV */
+				>;
+			};
+
+			timing-400000000 {
+				clock-frequency = <400000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200000>;
+				nvidia,emc-mode-reset = <0x80000521>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-configuration = <
+					0x00000012 /* EMC_RC */
+					0x00000066 /* EMC_RFC */
+					0x0000000c /* EMC_RAS */
+					0x00000004 /* EMC_RP */
+					0x00000003 /* EMC_R2W */
+					0x00000008 /* EMC_W2R */
+					0x00000002 /* EMC_R2P */
+					0x0000000a /* EMC_W2P */
+					0x00000004 /* EMC_RD_RCD */
+					0x00000004 /* EMC_WR_RCD */
+					0x00000002 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000004 /* EMC_WDV */
+					0x00000006 /* EMC_QUSE */
+					0x00000004 /* EMC_QRST */
+					0x0000000a /* EMC_QSAFE */
+					0x0000000c /* EMC_RDV */
+					0x00000bf0 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x000002fc /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000001 /* EMC_PDEX2WR */
+					0x00000008 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000008 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x0000006c /* EMC_TXSR */
+					0x00000200 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000010 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000004 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x00000c30 /* EMC_TREFBW */
+					0x00000000 /* EMC_QUSE_EXTRA */
+					0x00000004 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00007088 /* EMC_FBIO_CFG5 */
+					0x001d0084 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x0003c000 /* EMC_DLL_XFORM_DQS0 */
+					0x0003c000 /* EMC_DLL_XFORM_DQS1 */
+					0x0003c000 /* EMC_DLL_XFORM_DQS2 */
+					0x0003c000 /* EMC_DLL_XFORM_DQS3 */
+					0x0003c000 /* EMC_DLL_XFORM_DQS4 */
+					0x0003c000 /* EMC_DLL_XFORM_DQS5 */
+					0x0003c000 /* EMC_DLL_XFORM_DQS6 */
+					0x0003c000 /* EMC_DLL_XFORM_DQS7 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x00048000 /* EMC_DLL_XFORM_DQ0 */
+					0x00048000 /* EMC_DLL_XFORM_DQ1 */
+					0x00048000 /* EMC_DLL_XFORM_DQ2 */
+					0x00048000 /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0800013d /* EMC_XM2DQSPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f508 /* EMC_XM2COMPPADCTRL */
+					0x05057404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
+					0x080001e8 /* EMC_XM2QUSEPADCTRL */
+					0x08000021 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00020000 /* EMC_ZCAL_INTERVAL */
+					0x00000100 /* EMC_ZCAL_WAIT_CNT */
+					0x0158000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x800018c8 /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff89 /* EMC_CFG_RSV */
+				>;
+			};
+
+			timing-800000000 {
+				clock-frequency = <800000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200018>;
+				nvidia,emc-mode-reset = <0x80000d71>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+				nvidia,emc-configuration = <
+					0x00000025 /* EMC_RC */
+					0x000000ce /* EMC_RFC */
+					0x0000001a /* EMC_RAS */
+					0x00000009 /* EMC_RP */
+					0x00000005 /* EMC_R2W */
+					0x0000000d /* EMC_W2R */
+					0x00000004 /* EMC_R2P */
+					0x00000013 /* EMC_W2P */
+					0x00000009 /* EMC_RD_RCD */
+					0x00000009 /* EMC_WR_RCD */
+					0x00000004 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000007 /* EMC_WDV */
+					0x0000000a /* EMC_QUSE */
+					0x00000009 /* EMC_QRST */
+					0x0000000b /* EMC_QSAFE */
+					0x00000011 /* EMC_RDV */
+					0x00001820 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000608 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000003 /* EMC_PDEX2WR */
+					0x00000012 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x0000000f /* EMC_AR2PDEN */
+					0x00000018 /* EMC_RW2PDEN */
+					0x000000d8 /* EMC_TXSR */
+					0x00000200 /* EMC_TXSRDLL */
+					0x00000005 /* EMC_TCKE */
+					0x00000020 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000007 /* EMC_TCLKSTABLE */
+					0x00000008 /* EMC_TCLKSTOP */
+					0x00001860 /* EMC_TREFBW */
+					0x0000000b /* EMC_QUSE_EXTRA */
+					0x00000006 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00005088 /* EMC_FBIO_CFG5 */
+					0xf0070191 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x0000800a /* EMC_DLL_XFORM_DQS0 */
+					0x0000000a /* EMC_DLL_XFORM_DQS1 */
+					0x0000000a /* EMC_DLL_XFORM_DQS2 */
+					0x0000000a /* EMC_DLL_XFORM_DQS3 */
+					0x0000000a /* EMC_DLL_XFORM_DQS4 */
+					0x0000000a /* EMC_DLL_XFORM_DQS5 */
+					0x0000000a /* EMC_DLL_XFORM_DQS6 */
+					0x0000000a /* EMC_DLL_XFORM_DQS7 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x0000000a /* EMC_DLL_XFORM_DQ0 */
+					0x0000000a /* EMC_DLL_XFORM_DQ1 */
+					0x0000000a /* EMC_DLL_XFORM_DQ2 */
+					0x0000000a /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0600013d /* EMC_XM2DQSPADCTRL2 */
+					0x22220000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f501 /* EMC_XM2COMPPADCTRL */
+					0x07077404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000000 /* EMC_XM2VTTGENPADCTRL2 */
+					0x080001e8 /* EMC_XM2QUSEPADCTRL */
+					0x08000021 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00020000 /* EMC_ZCAL_INTERVAL */
+					0x00000100 /* EMC_ZCAL_WAIT_CNT */
+					0x00f0000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x8000308c /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff49 /* EMC_CFG_RSV */
+				>;
+			};
+		};
+
+		emc-timings-1 {
+			nvidia,ram-code = <1>;  /* Hynix M RAM */
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-configuration = <
+					0x00000001 /* EMC_RC */
+					0x00000006 /* EMC_RFC */
+					0x00000000 /* EMC_RAS */
+					0x00000000 /* EMC_RP */
+					0x00000002 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000005 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000000 /* EMC_RD_RCD */
+					0x00000000 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000005 /* EMC_WDV */
+					0x00000005 /* EMC_QUSE */
+					0x00000004 /* EMC_QRST */
+					0x0000000a /* EMC_QSAFE */
+					0x0000000b /* EMC_RDV */
+					0x000000c0 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000030 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000007 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x00000007 /* EMC_TXSR */
+					0x00000007 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000002 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000004 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x000000c7 /* EMC_TREFBW */
+					0x00000006 /* EMC_QUSE_EXTRA */
+					0x00000004 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00004288 /* EMC_FBIO_CFG5 */
+					0x007800a4 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x000fc000 /* EMC_DLL_XFORM_DQS0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS3 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS4 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS5 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS6 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS7 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0800211c /* EMC_XM2DQSPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f108 /* EMC_XM2COMPPADCTRL */
+					0x05057404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
+					0x08000168 /* EMC_XM2QUSEPADCTRL */
+					0x08000000 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00000000 /* EMC_ZCAL_INTERVAL */
+					0x00000040 /* EMC_ZCAL_WAIT_CNT */
+					0x000c000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x80000287 /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff00 /* EMC_CFG_RSV */
+				>;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-configuration = <
+					0x00000002 /* EMC_RC */
+					0x0000000d /* EMC_RFC */
+					0x00000001 /* EMC_RAS */
+					0x00000000 /* EMC_RP */
+					0x00000002 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000005 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000000 /* EMC_RD_RCD */
+					0x00000000 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000005 /* EMC_WDV */
+					0x00000005 /* EMC_QUSE */
+					0x00000004 /* EMC_QRST */
+					0x0000000a /* EMC_QSAFE */
+					0x0000000b /* EMC_RDV */
+					0x00000181 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000060 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000007 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x0000000e /* EMC_TXSR */
+					0x0000000e /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000003 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000004 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x0000018e /* EMC_TREFBW */
+					0x00000006 /* EMC_QUSE_EXTRA */
+					0x00000004 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00004288 /* EMC_FBIO_CFG5 */
+					0x007800a4 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x000fc000 /* EMC_DLL_XFORM_DQS0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS3 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS4 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS5 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS6 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS7 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0800211c /* EMC_XM2DQSPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f108 /* EMC_XM2COMPPADCTRL */
+					0x05057404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
+					0x08000168 /* EMC_XM2QUSEPADCTRL */
+					0x08000000 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00000000 /* EMC_ZCAL_INTERVAL */
+					0x00000040 /* EMC_ZCAL_WAIT_CNT */
+					0x000c000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x8000040b /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff00 /* EMC_CFG_RSV */
+				>;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-configuration = <
+					0x00000004 /* EMC_RC */
+					0x0000001a /* EMC_RFC */
+					0x00000003 /* EMC_RAS */
+					0x00000001 /* EMC_RP */
+					0x00000002 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000005 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000001 /* EMC_RD_RCD */
+					0x00000001 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000005 /* EMC_WDV */
+					0x00000005 /* EMC_QUSE */
+					0x00000004 /* EMC_QRST */
+					0x0000000a /* EMC_QSAFE */
+					0x0000000b /* EMC_RDV */
+					0x00000303 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x000000c0 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000007 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x0000001c /* EMC_TXSR */
+					0x0000001c /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000005 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000004 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x0000031c /* EMC_TREFBW */
+					0x00000006 /* EMC_QUSE_EXTRA */
+					0x00000004 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00004288 /* EMC_FBIO_CFG5 */
+					0x007800a4 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x000fc000 /* EMC_DLL_XFORM_DQS0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS3 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS4 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS5 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS6 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS7 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0800211c /* EMC_XM2DQSPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f108 /* EMC_XM2COMPPADCTRL */
+					0x05057404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
+					0x08000168 /* EMC_XM2QUSEPADCTRL */
+					0x08000000 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00000000 /* EMC_ZCAL_INTERVAL */
+					0x00000040 /* EMC_ZCAL_WAIT_CNT */
+					0x000c000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x80000713 /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff00 /* EMC_CFG_RSV */
+				>;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-configuration = <
+					0x00000009 /* EMC_RC */
+					0x00000035 /* EMC_RFC */
+					0x00000007 /* EMC_RAS */
+					0x00000002 /* EMC_RP */
+					0x00000002 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000005 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000002 /* EMC_RD_RCD */
+					0x00000002 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000005 /* EMC_WDV */
+					0x00000005 /* EMC_QUSE */
+					0x00000004 /* EMC_QRST */
+					0x0000000a /* EMC_QSAFE */
+					0x0000000b /* EMC_RDV */
+					0x00000607 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000181 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000007 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x00000038 /* EMC_TXSR */
+					0x00000038 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000009 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000004 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x00000638 /* EMC_TREFBW */
+					0x00000006 /* EMC_QUSE_EXTRA */
+					0x00000006 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00004288 /* EMC_FBIO_CFG5 */
+					0x004400a4 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x00080000 /* EMC_DLL_XFORM_DQS0 */
+					0x00080000 /* EMC_DLL_XFORM_DQS1 */
+					0x00080000 /* EMC_DLL_XFORM_DQS2 */
+					0x00080000 /* EMC_DLL_XFORM_DQS3 */
+					0x00080000 /* EMC_DLL_XFORM_DQS4 */
+					0x00080000 /* EMC_DLL_XFORM_DQS5 */
+					0x00080000 /* EMC_DLL_XFORM_DQS6 */
+					0x00080000 /* EMC_DLL_XFORM_DQS7 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x00080000 /* EMC_DLL_XFORM_DQ0 */
+					0x00080000 /* EMC_DLL_XFORM_DQ1 */
+					0x00080000 /* EMC_DLL_XFORM_DQ2 */
+					0x00080000 /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0800211c /* EMC_XM2DQSPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f108 /* EMC_XM2COMPPADCTRL */
+					0x05057404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
+					0x08000168 /* EMC_XM2QUSEPADCTRL */
+					0x08000000 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00020000 /* EMC_ZCAL_INTERVAL */
+					0x00000100 /* EMC_ZCAL_WAIT_CNT */
+					0x000c000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x80000d22 /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff00 /* EMC_CFG_RSV */
+				>;
+			};
+
+			timing-400000000 {
+				clock-frequency = <400000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200000>;
+				nvidia,emc-mode-reset = <0x80000521>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-configuration = <
+					0x00000012 /* EMC_RC */
+					0x00000066 /* EMC_RFC */
+					0x0000000c /* EMC_RAS */
+					0x00000004 /* EMC_RP */
+					0x00000003 /* EMC_R2W */
+					0x00000008 /* EMC_W2R */
+					0x00000002 /* EMC_R2P */
+					0x0000000a /* EMC_W2P */
+					0x00000004 /* EMC_RD_RCD */
+					0x00000004 /* EMC_WR_RCD */
+					0x00000002 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000004 /* EMC_WDV */
+					0x00000006 /* EMC_QUSE */
+					0x00000004 /* EMC_QRST */
+					0x0000000a /* EMC_QSAFE */
+					0x0000000c /* EMC_RDV */
+					0x00000bf0 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x000002fc /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000001 /* EMC_PDEX2WR */
+					0x00000008 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000008 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x0000006c /* EMC_TXSR */
+					0x00000200 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000010 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000004 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x00000c30 /* EMC_TREFBW */
+					0x00000000 /* EMC_QUSE_EXTRA */
+					0x00000004 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00007088 /* EMC_FBIO_CFG5 */
+					0x001d0084 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x0003c000 /* EMC_DLL_XFORM_DQS0 */
+					0x0003c000 /* EMC_DLL_XFORM_DQS1 */
+					0x0003c000 /* EMC_DLL_XFORM_DQS2 */
+					0x0003c000 /* EMC_DLL_XFORM_DQS3 */
+					0x0003c000 /* EMC_DLL_XFORM_DQS4 */
+					0x0003c000 /* EMC_DLL_XFORM_DQS5 */
+					0x0003c000 /* EMC_DLL_XFORM_DQS6 */
+					0x0003c000 /* EMC_DLL_XFORM_DQS7 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x00048000 /* EMC_DLL_XFORM_DQ0 */
+					0x00048000 /* EMC_DLL_XFORM_DQ1 */
+					0x00048000 /* EMC_DLL_XFORM_DQ2 */
+					0x00048000 /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0800013d /* EMC_XM2DQSPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f508 /* EMC_XM2COMPPADCTRL */
+					0x05057404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
+					0x080001e8 /* EMC_XM2QUSEPADCTRL */
+					0x08000021 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00020000 /* EMC_ZCAL_INTERVAL */
+					0x00000100 /* EMC_ZCAL_WAIT_CNT */
+					0x0158000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x800018c8 /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff89 /* EMC_CFG_RSV */
+				>;
+			};
+
+			timing-800000000 {
+				clock-frequency = <800000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200018>;
+				nvidia,emc-mode-reset = <0x80000d71>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+				nvidia,emc-configuration = <
+					0x00000025 /* EMC_RC */
+					0x000000ce /* EMC_RFC */
+					0x0000001a /* EMC_RAS */
+					0x00000009 /* EMC_RP */
+					0x00000005 /* EMC_R2W */
+					0x0000000d /* EMC_W2R */
+					0x00000004 /* EMC_R2P */
+					0x00000013 /* EMC_W2P */
+					0x00000009 /* EMC_RD_RCD */
+					0x00000009 /* EMC_WR_RCD */
+					0x00000004 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000007 /* EMC_WDV */
+					0x0000000a /* EMC_QUSE */
+					0x00000009 /* EMC_QRST */
+					0x0000000b /* EMC_QSAFE */
+					0x00000011 /* EMC_RDV */
+					0x00001820 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000608 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000003 /* EMC_PDEX2WR */
+					0x00000012 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x0000000f /* EMC_AR2PDEN */
+					0x00000018 /* EMC_RW2PDEN */
+					0x000000d8 /* EMC_TXSR */
+					0x00000200 /* EMC_TXSRDLL */
+					0x00000005 /* EMC_TCKE */
+					0x00000020 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000007 /* EMC_TCLKSTABLE */
+					0x00000008 /* EMC_TCLKSTOP */
+					0x00001860 /* EMC_TREFBW */
+					0x0000000b /* EMC_QUSE_EXTRA */
+					0x00000006 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00005088 /* EMC_FBIO_CFG5 */
+					0xf0070191 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x0000800a /* EMC_DLL_XFORM_DQS0 */
+					0x0000000a /* EMC_DLL_XFORM_DQS1 */
+					0x0000000a /* EMC_DLL_XFORM_DQS2 */
+					0x0000000a /* EMC_DLL_XFORM_DQS3 */
+					0x0000000a /* EMC_DLL_XFORM_DQS4 */
+					0x0000000a /* EMC_DLL_XFORM_DQS5 */
+					0x0000000a /* EMC_DLL_XFORM_DQS6 */
+					0x0000000a /* EMC_DLL_XFORM_DQS7 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x0000000a /* EMC_DLL_XFORM_DQ0 */
+					0x0000000a /* EMC_DLL_XFORM_DQ1 */
+					0x0000000a /* EMC_DLL_XFORM_DQ2 */
+					0x0000000a /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0600013d /* EMC_XM2DQSPADCTRL2 */
+					0x22220000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f501 /* EMC_XM2COMPPADCTRL */
+					0x07077404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000000 /* EMC_XM2VTTGENPADCTRL2 */
+					0x080001e8 /* EMC_XM2QUSEPADCTRL */
+					0x08000021 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00020000 /* EMC_ZCAL_INTERVAL */
+					0x00000100 /* EMC_ZCAL_WAIT_CNT */
+					0x00f0000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x8000308c /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff49 /* EMC_CFG_RSV */
+				>;
+			};
+		};
+
+		emc-timings-2 {
+			nvidia,ram-code = <2>;  /* Hynix A RAM */
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-configuration = <
+					0x00000001 /* EMC_RC */
+					0x00000007 /* EMC_RFC */
+					0x00000000 /* EMC_RAS */
+					0x00000000 /* EMC_RP */
+					0x00000002 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000005 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000000 /* EMC_RD_RCD */
+					0x00000000 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000005 /* EMC_WDV */
+					0x00000005 /* EMC_QUSE */
+					0x00000004 /* EMC_QRST */
+					0x0000000a /* EMC_QSAFE */
+					0x0000000b /* EMC_RDV */
+					0x000000c0 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000030 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000007 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x00000008 /* EMC_TXSR */
+					0x00000008 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000002 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000004 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x000000c7 /* EMC_TREFBW */
+					0x00000006 /* EMC_QUSE_EXTRA */
+					0x00000004 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00004288 /* EMC_FBIO_CFG5 */
+					0x007800a4 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x000fc000 /* EMC_DLL_XFORM_DQS0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS3 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS4 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS5 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS6 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS7 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0800211c /* EMC_XM2DQSPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f108 /* EMC_XM2COMPPADCTRL */
+					0x05057404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
+					0x08000168 /* EMC_XM2QUSEPADCTRL */
+					0x08000000 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00000000 /* EMC_ZCAL_INTERVAL */
+					0x00000040 /* EMC_ZCAL_WAIT_CNT */
+					0x000c000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x80000287 /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff00 /* EMC_CFG_RSV */
+				>;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-configuration = <
+					0x00000002 /* EMC_RC */
+					0x0000000f /* EMC_RFC */
+					0x00000001 /* EMC_RAS */
+					0x00000000 /* EMC_RP */
+					0x00000002 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000005 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000000 /* EMC_RD_RCD */
+					0x00000000 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000005 /* EMC_WDV */
+					0x00000005 /* EMC_QUSE */
+					0x00000004 /* EMC_QRST */
+					0x0000000a /* EMC_QSAFE */
+					0x0000000b /* EMC_RDV */
+					0x00000181 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000060 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000007 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x00000010 /* EMC_TXSR */
+					0x00000010 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000003 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000004 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x0000018e /* EMC_TREFBW */
+					0x00000006 /* EMC_QUSE_EXTRA */
+					0x00000004 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00004288 /* EMC_FBIO_CFG5 */
+					0x007800a4 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x000fc000 /* EMC_DLL_XFORM_DQS0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS3 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS4 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS5 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS6 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS7 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0800211c /* EMC_XM2DQSPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f108 /* EMC_XM2COMPPADCTRL */
+					0x05057404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
+					0x08000168 /* EMC_XM2QUSEPADCTRL */
+					0x08000000 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00000000 /* EMC_ZCAL_INTERVAL */
+					0x00000040 /* EMC_ZCAL_WAIT_CNT */
+					0x000c000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x8000040b /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff00 /* EMC_CFG_RSV */
+				>;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-configuration = <
+					0x00000004 /* EMC_RC */
+					0x0000001e /* EMC_RFC */
+					0x00000003 /* EMC_RAS */
+					0x00000001 /* EMC_RP */
+					0x00000002 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000005 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000001 /* EMC_RD_RCD */
+					0x00000001 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000005 /* EMC_WDV */
+					0x00000005 /* EMC_QUSE */
+					0x00000004 /* EMC_QRST */
+					0x0000000a /* EMC_QSAFE */
+					0x0000000b /* EMC_RDV */
+					0x00000303 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x000000c0 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000007 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x00000020 /* EMC_TXSR */
+					0x00000020 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000005 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000004 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x0000031c /* EMC_TREFBW */
+					0x00000006 /* EMC_QUSE_EXTRA */
+					0x00000004 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00004288 /* EMC_FBIO_CFG5 */
+					0x007800a4 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x000fc000 /* EMC_DLL_XFORM_DQS0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS3 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS4 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS5 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS6 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS7 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0800211c /* EMC_XM2DQSPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f108 /* EMC_XM2COMPPADCTRL */
+					0x05057404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
+					0x08000168 /* EMC_XM2QUSEPADCTRL */
+					0x08000000 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00000000 /* EMC_ZCAL_INTERVAL */
+					0x00000040 /* EMC_ZCAL_WAIT_CNT */
+					0x000c000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x80000713 /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff00 /* EMC_CFG_RSV */
+				>;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-configuration = <
+					0x00000009 /* EMC_RC */
+					0x0000003d /* EMC_RFC */
+					0x00000007 /* EMC_RAS */
+					0x00000002 /* EMC_RP */
+					0x00000002 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000005 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000002 /* EMC_RD_RCD */
+					0x00000002 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000005 /* EMC_WDV */
+					0x00000005 /* EMC_QUSE */
+					0x00000004 /* EMC_QRST */
+					0x0000000a /* EMC_QSAFE */
+					0x0000000b /* EMC_RDV */
+					0x00000607 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000181 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000007 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x00000040 /* EMC_TXSR */
+					0x00000040 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000009 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000004 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x00000638 /* EMC_TREFBW */
+					0x00000006 /* EMC_QUSE_EXTRA */
+					0x00000006 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00004288 /* EMC_FBIO_CFG5 */
+					0x004400a4 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x00080000 /* EMC_DLL_XFORM_DQS0 */
+					0x00080000 /* EMC_DLL_XFORM_DQS1 */
+					0x00080000 /* EMC_DLL_XFORM_DQS2 */
+					0x00080000 /* EMC_DLL_XFORM_DQS3 */
+					0x00080000 /* EMC_DLL_XFORM_DQS4 */
+					0x00080000 /* EMC_DLL_XFORM_DQS5 */
+					0x00080000 /* EMC_DLL_XFORM_DQS6 */
+					0x00080000 /* EMC_DLL_XFORM_DQS7 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x00080000 /* EMC_DLL_XFORM_DQ0 */
+					0x00080000 /* EMC_DLL_XFORM_DQ1 */
+					0x00080000 /* EMC_DLL_XFORM_DQ2 */
+					0x00080000 /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0800211c /* EMC_XM2DQSPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f108 /* EMC_XM2COMPPADCTRL */
+					0x05057404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
+					0x08000168 /* EMC_XM2QUSEPADCTRL */
+					0x08000000 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00020000 /* EMC_ZCAL_INTERVAL */
+					0x00000100 /* EMC_ZCAL_WAIT_CNT */
+					0x000c000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x80000d22 /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff00 /* EMC_CFG_RSV */
+				>;
+			};
+
+			timing-400000000 {
+				clock-frequency = <400000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200000>;
+				nvidia,emc-mode-reset = <0x80000521>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-configuration = <
+					0x00000012 /* EMC_RC */
+					0x00000076 /* EMC_RFC */
+					0x0000000c /* EMC_RAS */
+					0x00000004 /* EMC_RP */
+					0x00000003 /* EMC_R2W */
+					0x00000008 /* EMC_W2R */
+					0x00000002 /* EMC_R2P */
+					0x0000000a /* EMC_W2P */
+					0x00000004 /* EMC_RD_RCD */
+					0x00000004 /* EMC_WR_RCD */
+					0x00000002 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000004 /* EMC_WDV */
+					0x00000006 /* EMC_QUSE */
+					0x00000004 /* EMC_QRST */
+					0x0000000a /* EMC_QSAFE */
+					0x0000000c /* EMC_RDV */
+					0x00000bf0 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x000002fc /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000001 /* EMC_PDEX2WR */
+					0x00000008 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000008 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x0000007c /* EMC_TXSR */
+					0x00000200 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000010 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000004 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x00000c30 /* EMC_TREFBW */
+					0x00000000 /* EMC_QUSE_EXTRA */
+					0x00000004 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00007088 /* EMC_FBIO_CFG5 */
+					0x001d0084 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x00044000 /* EMC_DLL_XFORM_DQS0 */
+					0x00044000 /* EMC_DLL_XFORM_DQS1 */
+					0x00044000 /* EMC_DLL_XFORM_DQS2 */
+					0x00044000 /* EMC_DLL_XFORM_DQS3 */
+					0x00044000 /* EMC_DLL_XFORM_DQS4 */
+					0x00044000 /* EMC_DLL_XFORM_DQS5 */
+					0x00044000 /* EMC_DLL_XFORM_DQS6 */
+					0x00044000 /* EMC_DLL_XFORM_DQS7 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x00058000 /* EMC_DLL_XFORM_DQ0 */
+					0x00058000 /* EMC_DLL_XFORM_DQ1 */
+					0x00058000 /* EMC_DLL_XFORM_DQ2 */
+					0x00058000 /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0800013d /* EMC_XM2DQSPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f508 /* EMC_XM2COMPPADCTRL */
+					0x05057404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
+					0x080001e8 /* EMC_XM2QUSEPADCTRL */
+					0x08000021 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00020000 /* EMC_ZCAL_INTERVAL */
+					0x00000100 /* EMC_ZCAL_WAIT_CNT */
+					0x0148000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x800018c8 /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff89 /* EMC_CFG_RSV */
+				>;
+			};
+
+			timing-800000000 {
+				clock-frequency = <800000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200018>;
+				nvidia,emc-mode-reset = <0x80000d71>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+				nvidia,emc-configuration = <
+					0x00000025 /* EMC_RC */
+					0x000000ee /* EMC_RFC */
+					0x0000001a /* EMC_RAS */
+					0x00000009 /* EMC_RP */
+					0x00000005 /* EMC_R2W */
+					0x0000000d /* EMC_W2R */
+					0x00000004 /* EMC_R2P */
+					0x00000013 /* EMC_W2P */
+					0x00000009 /* EMC_RD_RCD */
+					0x00000009 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000007 /* EMC_WDV */
+					0x0000000a /* EMC_QUSE */
+					0x00000009 /* EMC_QRST */
+					0x0000000b /* EMC_QSAFE */
+					0x00000011 /* EMC_RDV */
+					0x00001820 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000608 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000003 /* EMC_PDEX2WR */
+					0x00000012 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x0000000f /* EMC_AR2PDEN */
+					0x00000018 /* EMC_RW2PDEN */
+					0x000000f8 /* EMC_TXSR */
+					0x00000200 /* EMC_TXSRDLL */
+					0x00000005 /* EMC_TCKE */
+					0x00000020 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000007 /* EMC_TCLKSTABLE */
+					0x00000008 /* EMC_TCLKSTOP */
+					0x00001860 /* EMC_TREFBW */
+					0x0000000b /* EMC_QUSE_EXTRA */
+					0x00000006 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00005088 /* EMC_FBIO_CFG5 */
+					0xf0070191 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x0000000c /* EMC_DLL_XFORM_DQS0 */
+					0x007fc00a /* EMC_DLL_XFORM_DQS1 */
+					0x00000008 /* EMC_DLL_XFORM_DQS2 */
+					0x0000000a /* EMC_DLL_XFORM_DQS3 */
+					0x0000000a /* EMC_DLL_XFORM_DQS4 */
+					0x0000000a /* EMC_DLL_XFORM_DQS5 */
+					0x0000000a /* EMC_DLL_XFORM_DQS6 */
+					0x0000000a /* EMC_DLL_XFORM_DQS7 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x0000000a /* EMC_DLL_XFORM_DQ0 */
+					0x0000000c /* EMC_DLL_XFORM_DQ1 */
+					0x0000000a /* EMC_DLL_XFORM_DQ2 */
+					0x0000000a /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0600013d /* EMC_XM2DQSPADCTRL2 */
+					0x22220000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f501 /* EMC_XM2COMPPADCTRL */
+					0x07077404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000000 /* EMC_XM2VTTGENPADCTRL2 */
+					0x080001e8 /* EMC_XM2QUSEPADCTRL */
+					0x0a000021 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00020000 /* EMC_ZCAL_INTERVAL */
+					0x00000100 /* EMC_ZCAL_WAIT_CNT */
+					0x00d0000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x8000308c /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff49 /* EMC_CFG_RSV */
+				>;
+			};
+		};
 	};
 
 	hda@70030000 {
@@ -592,3940 +4786,11 @@
 		};
 	};
 };
-&mc_timings {
-	emc-timings-0 {
-		nvidia,ram-code = <0>; /* Samsung RAM */
-		timing-25500000 {
-			clock-frequency = <25500000>;
-			nvidia,emem-configuration = <
-				0x00030003 /* MC_EMEM_ARB_CFG */
-				0xc0000010 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-				0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
-				0x00000001 /* MC_EMEM_ARB_TIMING_RP */
-				0x00000002 /* MC_EMEM_ARB_TIMING_RC */
-				0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
-				0x00000001 /* MC_EMEM_ARB_TIMING_FAW */
-				0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-				0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-				0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-				0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
-				0x00000001 /* MC_EMEM_ARB_TIMING_W2W */
-				0x00000002 /* MC_EMEM_ARB_TIMING_R2W */
-				0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-				0x06020102 /* MC_EMEM_ARB_DA_TURNS */
-				0x000a0502 /* MC_EMEM_ARB_DA_COVERS */
-				0x75830303 /* MC_EMEM_ARB_MISC0 */
-				0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-			>;
-		};
-		timing-51000000 {
-			clock-frequency = <51000000>;
-			nvidia,emem-configuration = <
-				0x00010003 /* MC_EMEM_ARB_CFG */
-				0xc0000010 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-				0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
-				0x00000001 /* MC_EMEM_ARB_TIMING_RP */
-				0x00000002 /* MC_EMEM_ARB_TIMING_RC */
-				0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
-				0x00000001 /* MC_EMEM_ARB_TIMING_FAW */
-				0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-				0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-				0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-				0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
-				0x00000001 /* MC_EMEM_ARB_TIMING_W2W */
-				0x00000002 /* MC_EMEM_ARB_TIMING_R2W */
-				0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-				0x06020102 /* MC_EMEM_ARB_DA_TURNS */
-				0x000a0502 /* MC_EMEM_ARB_DA_COVERS */
-				0x74630303 /* MC_EMEM_ARB_MISC0 */
-				0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-			>;
-		};
-		timing-102000000 {
-			clock-frequency = <102000000>;
-			nvidia,emem-configuration = <
-				0x00000003 /* MC_EMEM_ARB_CFG */
-				0xc0000018 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-				0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
-				0x00000001 /* MC_EMEM_ARB_TIMING_RP */
-				0x00000003 /* MC_EMEM_ARB_TIMING_RC */
-				0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
-				0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
-				0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-				0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-				0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-				0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
-				0x00000001 /* MC_EMEM_ARB_TIMING_W2W */
-				0x00000002 /* MC_EMEM_ARB_TIMING_R2W */
-				0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-				0x06020102 /* MC_EMEM_ARB_DA_TURNS */
-				0x000a0503 /* MC_EMEM_ARB_DA_COVERS */
-				0x73c30504 /* MC_EMEM_ARB_MISC0 */
-				0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-			>;
-		};
-		timing-204000000 {
-			clock-frequency = <204000000>;
-			nvidia,emem-configuration = <
-				0x00000006 /* MC_EMEM_ARB_CFG */
-				0xc0000025 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-				0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
-				0x00000001 /* MC_EMEM_ARB_TIMING_RP */
-				0x00000005 /* MC_EMEM_ARB_TIMING_RC */
-				0x00000002 /* MC_EMEM_ARB_TIMING_RAS */
-				0x00000004 /* MC_EMEM_ARB_TIMING_FAW */
-				0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-				0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-				0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-				0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
-				0x00000001 /* MC_EMEM_ARB_TIMING_W2W */
-				0x00000002 /* MC_EMEM_ARB_TIMING_R2W */
-				0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-				0x06020102 /* MC_EMEM_ARB_DA_TURNS */
-				0x000a0505 /* MC_EMEM_ARB_DA_COVERS */
-				0x73840a06 /* MC_EMEM_ARB_MISC0 */
-				0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-			>;
-		};
-		timing-400000000 {
-			clock-frequency = <400000000>;
-			nvidia,emem-configuration = <
-				0x0000000c /* MC_EMEM_ARB_CFG */
-				0xc0000048 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-				0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
-				0x00000002 /* MC_EMEM_ARB_TIMING_RP */
-				0x00000009 /* MC_EMEM_ARB_TIMING_RC */
-				0x00000005 /* MC_EMEM_ARB_TIMING_RAS */
-				0x00000007 /* MC_EMEM_ARB_TIMING_FAW */
-				0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-				0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-				0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-				0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
-				0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-				0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
-				0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-				0x06030202 /* MC_EMEM_ARB_DA_TURNS */
-				0x000d0709 /* MC_EMEM_ARB_DA_COVERS */
-				0x7086120a /* MC_EMEM_ARB_MISC0 */
-				0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-			>;
-		};
-		timing-800000000 {
-			clock-frequency = <800000000>;
-			nvidia,emem-configuration = <
-				0x00000018 /* MC_EMEM_ARB_CFG */
-				0xc0000090 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-				0x00000004 /* MC_EMEM_ARB_TIMING_RCD */
-				0x00000005 /* MC_EMEM_ARB_TIMING_RP */
-				0x00000013 /* MC_EMEM_ARB_TIMING_RC */
-				0x0000000c /* MC_EMEM_ARB_TIMING_RAS */
-				0x0000000f /* MC_EMEM_ARB_TIMING_FAW */
-				0x00000002 /* MC_EMEM_ARB_TIMING_RRD */
-				0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-				0x0000000c /* MC_EMEM_ARB_TIMING_WAP2PRE */
-				0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
-				0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-				0x00000004 /* MC_EMEM_ARB_TIMING_R2W */
-				0x00000008 /* MC_EMEM_ARB_TIMING_W2R */
-				0x08040202 /* MC_EMEM_ARB_DA_TURNS */
-				0x00160d13 /* MC_EMEM_ARB_DA_COVERS */
-				0x712c2414 /* MC_EMEM_ARB_MISC0 */
-				0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-			>;
-		};
-	};
-	emc-timings-1 {
-		nvidia,ram-code = <1>; /* Hynix M RAM */
-		timing-25500000 {
-			clock-frequency = <25500000>;
-			nvidia,emem-configuration = <
-				0x00030003 /* MC_EMEM_ARB_CFG */
-				0xc0000010 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-				0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
-				0x00000001 /* MC_EMEM_ARB_TIMING_RP */
-				0x00000002 /* MC_EMEM_ARB_TIMING_RC */
-				0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
-				0x00000001 /* MC_EMEM_ARB_TIMING_FAW */
-				0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-				0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-				0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-				0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
-				0x00000001 /* MC_EMEM_ARB_TIMING_W2W */
-				0x00000002 /* MC_EMEM_ARB_TIMING_R2W */
-				0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-				0x06020102 /* MC_EMEM_ARB_DA_TURNS */
-				0x000a0502 /* MC_EMEM_ARB_DA_COVERS */
-				0x75830303 /* MC_EMEM_ARB_MISC0 */
-				0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-			>;
-		};
-		timing-51000000 {
-			clock-frequency = <51000000>;
-			nvidia,emem-configuration = <
-				0x00010003 /* MC_EMEM_ARB_CFG */
-				0xc0000010 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-				0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
-				0x00000001 /* MC_EMEM_ARB_TIMING_RP */
-				0x00000002 /* MC_EMEM_ARB_TIMING_RC */
-				0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
-				0x00000001 /* MC_EMEM_ARB_TIMING_FAW */
-				0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-				0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-				0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-				0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
-				0x00000001 /* MC_EMEM_ARB_TIMING_W2W */
-				0x00000002 /* MC_EMEM_ARB_TIMING_R2W */
-				0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-				0x06020102 /* MC_EMEM_ARB_DA_TURNS */
-				0x000a0502 /* MC_EMEM_ARB_DA_COVERS */
-				0x74630303 /* MC_EMEM_ARB_MISC0 */
-				0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-			>;
-		};
-		timing-102000000 {
-			clock-frequency = <102000000>;
-			nvidia,emem-configuration = <
-				0x00000003 /* MC_EMEM_ARB_CFG */
-				0xc0000018 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-				0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
-				0x00000001 /* MC_EMEM_ARB_TIMING_RP */
-				0x00000003 /* MC_EMEM_ARB_TIMING_RC */
-				0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
-				0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
-				0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-				0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-				0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-				0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
-				0x00000001 /* MC_EMEM_ARB_TIMING_W2W */
-				0x00000002 /* MC_EMEM_ARB_TIMING_R2W */
-				0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-				0x06020102 /* MC_EMEM_ARB_DA_TURNS */
-				0x000a0503 /* MC_EMEM_ARB_DA_COVERS */
-				0x73c30504 /* MC_EMEM_ARB_MISC0 */
-				0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-			>;
-		};
-		timing-204000000 {
-			clock-frequency = <204000000>;
-			nvidia,emem-configuration = <
-				0x00000006 /* MC_EMEM_ARB_CFG */
-				0xc0000025 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-				0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
-				0x00000001 /* MC_EMEM_ARB_TIMING_RP */
-				0x00000005 /* MC_EMEM_ARB_TIMING_RC */
-				0x00000002 /* MC_EMEM_ARB_TIMING_RAS */
-				0x00000004 /* MC_EMEM_ARB_TIMING_FAW */
-				0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-				0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-				0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-				0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
-				0x00000001 /* MC_EMEM_ARB_TIMING_W2W */
-				0x00000002 /* MC_EMEM_ARB_TIMING_R2W */
-				0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-				0x06020102 /* MC_EMEM_ARB_DA_TURNS */
-				0x000a0505 /* MC_EMEM_ARB_DA_COVERS */
-				0x73840a06 /* MC_EMEM_ARB_MISC0 */
-				0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-			>;
-		};
-		timing-400000000 {
-			clock-frequency = <400000000>;
-			nvidia,emem-configuration = <
-				0x0000000c /* MC_EMEM_ARB_CFG */
-				0xc0000048 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-				0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
-				0x00000002 /* MC_EMEM_ARB_TIMING_RP */
-				0x00000009 /* MC_EMEM_ARB_TIMING_RC */
-				0x00000005 /* MC_EMEM_ARB_TIMING_RAS */
-				0x00000007 /* MC_EMEM_ARB_TIMING_FAW */
-				0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-				0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-				0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-				0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
-				0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-				0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
-				0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-				0x06030202 /* MC_EMEM_ARB_DA_TURNS */
-				0x000d0709 /* MC_EMEM_ARB_DA_COVERS */
-				0x7086120a /* MC_EMEM_ARB_MISC0 */
-				0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-			>;
-		};
-		timing-800000000 {
-			clock-frequency = <800000000>;
-			nvidia,emem-configuration = <
-				0x00000018 /* MC_EMEM_ARB_CFG */
-				0xc0000090 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-				0x00000004 /* MC_EMEM_ARB_TIMING_RCD */
-				0x00000005 /* MC_EMEM_ARB_TIMING_RP */
-				0x00000013 /* MC_EMEM_ARB_TIMING_RC */
-				0x0000000c /* MC_EMEM_ARB_TIMING_RAS */
-				0x0000000f /* MC_EMEM_ARB_TIMING_FAW */
-				0x00000002 /* MC_EMEM_ARB_TIMING_RRD */
-				0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-				0x0000000c /* MC_EMEM_ARB_TIMING_WAP2PRE */
-				0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
-				0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-				0x00000004 /* MC_EMEM_ARB_TIMING_R2W */
-				0x00000008 /* MC_EMEM_ARB_TIMING_W2R */
-				0x08040202 /* MC_EMEM_ARB_DA_TURNS */
-				0x00160d13 /* MC_EMEM_ARB_DA_COVERS */
-				0x712c2414 /* MC_EMEM_ARB_MISC0 */
-				0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-			>;
-		};
-	};
-	emc-timings-2 {
-		nvidia,ram-code = <2>; /* Hynix A RAM */
-		timing-25500000 {
-			clock-frequency = <25500000>;
-			nvidia,emem-configuration = <
-				0x00030003 /* MC_EMEM_ARB_CFG */
-				0xc0000010 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-				0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
-				0x00000001 /* MC_EMEM_ARB_TIMING_RP */
-				0x00000002 /* MC_EMEM_ARB_TIMING_RC */
-				0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
-				0x00000001 /* MC_EMEM_ARB_TIMING_FAW */
-				0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-				0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-				0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-				0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
-				0x00000001 /* MC_EMEM_ARB_TIMING_W2W */
-				0x00000002 /* MC_EMEM_ARB_TIMING_R2W */
-				0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-				0x06020102 /* MC_EMEM_ARB_DA_TURNS */
-				0x000a0502 /* MC_EMEM_ARB_DA_COVERS */
-				0x75e30303 /* MC_EMEM_ARB_MISC0 */
-				0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-			>;
-		};
-		timing-51000000 {
-			clock-frequency = <51000000>;
-			nvidia,emem-configuration = <
-				0x00010003 /* MC_EMEM_ARB_CFG */
-				0xc0000010 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-				0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
-				0x00000001 /* MC_EMEM_ARB_TIMING_RP */
-				0x00000002 /* MC_EMEM_ARB_TIMING_RC */
-				0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
-				0x00000001 /* MC_EMEM_ARB_TIMING_FAW */
-				0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-				0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-				0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-				0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
-				0x00000001 /* MC_EMEM_ARB_TIMING_W2W */
-				0x00000002 /* MC_EMEM_ARB_TIMING_R2W */
-				0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-				0x06020102 /* MC_EMEM_ARB_DA_TURNS */
-				0x000a0502 /* MC_EMEM_ARB_DA_COVERS */
-				0x74e30303 /* MC_EMEM_ARB_MISC0 */
-				0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-			>;
-		};
-		timing-102000000 {
-			clock-frequency = <102000000>;
-			nvidia,emem-configuration = <
-				0x00000003 /* MC_EMEM_ARB_CFG */
-				0xc0000018 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-				0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
-				0x00000001 /* MC_EMEM_ARB_TIMING_RP */
-				0x00000003 /* MC_EMEM_ARB_TIMING_RC */
-				0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
-				0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
-				0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-				0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-				0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-				0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
-				0x00000001 /* MC_EMEM_ARB_TIMING_W2W */
-				0x00000002 /* MC_EMEM_ARB_TIMING_R2W */
-				0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-				0x06020102 /* MC_EMEM_ARB_DA_TURNS */
-				0x000a0503 /* MC_EMEM_ARB_DA_COVERS */
-				0x74430504 /* MC_EMEM_ARB_MISC0 */
-				0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-			>;
-		};
-		timing-204000000 {
-			clock-frequency = <204000000>;
-			nvidia,emem-configuration = <
-				0x00000006 /* MC_EMEM_ARB_CFG */
-				0xc0000025 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-				0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
-				0x00000001 /* MC_EMEM_ARB_TIMING_RP */
-				0x00000005 /* MC_EMEM_ARB_TIMING_RC */
-				0x00000002 /* MC_EMEM_ARB_TIMING_RAS */
-				0x00000004 /* MC_EMEM_ARB_TIMING_FAW */
-				0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-				0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-				0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-				0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
-				0x00000001 /* MC_EMEM_ARB_TIMING_W2W */
-				0x00000002 /* MC_EMEM_ARB_TIMING_R2W */
-				0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-				0x06020102 /* MC_EMEM_ARB_DA_TURNS */
-				0x000a0505 /* MC_EMEM_ARB_DA_COVERS */
-				0x74040a06 /* MC_EMEM_ARB_MISC0 */
-				0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-			>;
-		};
-		timing-400000000 {
-			clock-frequency = <400000000>;
-			nvidia,emem-configuration = <
-				0x0000000c /* MC_EMEM_ARB_CFG */
-				0xc0000048 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-				0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
-				0x00000002 /* MC_EMEM_ARB_TIMING_RP */
-				0x00000009 /* MC_EMEM_ARB_TIMING_RC */
-				0x00000005 /* MC_EMEM_ARB_TIMING_RAS */
-				0x00000007 /* MC_EMEM_ARB_TIMING_FAW */
-				0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-				0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-				0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-				0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
-				0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-				0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
-				0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-				0x06030202 /* MC_EMEM_ARB_DA_TURNS */
-				0x000d0709 /* MC_EMEM_ARB_DA_COVERS */
-				0x7086120a /* MC_EMEM_ARB_MISC0 */
-				0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-			>;
-		};
-		timing-800000000 {
-			clock-frequency = <800000000>;
-			nvidia,emem-configuration = <
-				0x00000018 /* MC_EMEM_ARB_CFG */
-				0xc0000090 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-				0x00000004 /* MC_EMEM_ARB_TIMING_RCD */
-				0x00000005 /* MC_EMEM_ARB_TIMING_RP */
-				0x00000013 /* MC_EMEM_ARB_TIMING_RC */
-				0x0000000c /* MC_EMEM_ARB_TIMING_RAS */
-				0x0000000f /* MC_EMEM_ARB_TIMING_FAW */
-				0x00000002 /* MC_EMEM_ARB_TIMING_RRD */
-				0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-				0x0000000c /* MC_EMEM_ARB_TIMING_WAP2PRE */
-				0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
-				0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-				0x00000004 /* MC_EMEM_ARB_TIMING_R2W */
-				0x00000008 /* MC_EMEM_ARB_TIMING_W2R */
-				0x08040202 /* MC_EMEM_ARB_DA_TURNS */
-				0x00160d13 /* MC_EMEM_ARB_DA_COVERS */
-				0x712c2414 /* MC_EMEM_ARB_MISC0 */
-				0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-			>;
-		};
-	};
-};
-&emc_timings {
-	emc-timings-0 {
-		nvidia,ram-code = <0>;  /* Samsung RAM */
-		timing-25500000 {
-			clock-frequency = <25500000>;
-			nvidia,emc-auto-cal-interval = <0x001fffff>;
-			nvidia,emc-mode-1 = <0x80100003>;
-			nvidia,emc-mode-2 = <0x80200008>;
-			nvidia,emc-mode-reset = <0x80001221>;
-			nvidia,emc-zcal-cnt-long = <0x00000040>;
-			nvidia,emc-cfg-periodic-qrst;
-			nvidia,emc-cfg-dyn-self-ref;
-			nvidia,emc-configuration = <
-				0x00000001 /* EMC_RC */
-				0x00000006 /* EMC_RFC */
-				0x00000000 /* EMC_RAS */
-				0x00000000 /* EMC_RP */
-				0x00000002 /* EMC_R2W */
-				0x0000000a /* EMC_W2R */
-				0x00000005 /* EMC_R2P */
-				0x0000000b /* EMC_W2P */
-				0x00000000 /* EMC_RD_RCD */
-				0x00000000 /* EMC_WR_RCD */
-				0x00000003 /* EMC_RRD */
-				0x00000001 /* EMC_REXT */
-				0x00000000 /* EMC_WEXT */
-				0x00000005 /* EMC_WDV */
-				0x00000005 /* EMC_QUSE */
-				0x00000004 /* EMC_QRST */
-				0x0000000a /* EMC_QSAFE */
-				0x0000000b /* EMC_RDV */
-				0x000000c0 /* EMC_REFRESH */
-				0x00000000 /* EMC_BURST_REFRESH_NUM */
-				0x00000030 /* EMC_PRE_REFRESH_REQ_CNT */
-				0x00000002 /* EMC_PDEX2WR */
-				0x00000002 /* EMC_PDEX2RD */
-				0x00000001 /* EMC_PCHG2PDEN */
-				0x00000000 /* EMC_ACT2PDEN */
-				0x00000007 /* EMC_AR2PDEN */
-				0x0000000f /* EMC_RW2PDEN */
-				0x00000007 /* EMC_TXSR */
-				0x00000007 /* EMC_TXSRDLL */
-				0x00000004 /* EMC_TCKE */
-				0x00000002 /* EMC_TFAW */
-				0x00000000 /* EMC_TRPAB */
-				0x00000004 /* EMC_TCLKSTABLE */
-				0x00000005 /* EMC_TCLKSTOP */
-				0x000000c7 /* EMC_TREFBW */
-				0x00000006 /* EMC_QUSE_EXTRA */
-				0x00000004 /* EMC_FBIO_CFG6 */
-				0x00000000 /* EMC_ODT_WRITE */
-				0x00000000 /* EMC_ODT_READ */
-				0x00004288 /* EMC_FBIO_CFG5 */
-				0x007800a4 /* EMC_CFG_DIG_DLL */
-				0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
-				0x000fc000 /* EMC_DLL_XFORM_DQS0 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS1 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS2 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS3 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS4 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS5 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS6 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS7 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE0 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE1 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE2 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE3 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE4 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE5 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE6 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE7 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
-				0x000fc000 /* EMC_DLL_XFORM_DQ0 */
-				0x000fc000 /* EMC_DLL_XFORM_DQ1 */
-				0x000fc000 /* EMC_DLL_XFORM_DQ2 */
-				0x000fc000 /* EMC_DLL_XFORM_DQ3 */
-				0x000002a0 /* EMC_XM2CMDPADCTRL */
-				0x0800211c /* EMC_XM2DQSPADCTRL2 */
-				0x00000000 /* EMC_XM2DQPADCTRL2 */
-				0x77fff884 /* EMC_XM2CLKPADCTRL */
-				0x01f1f108 /* EMC_XM2COMPPADCTRL */
-				0x05057404 /* EMC_XM2VTTGENPADCTRL */
-				0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
-				0x08000168 /* EMC_XM2QUSEPADCTRL */
-				0x08000000 /* EMC_XM2DQSPADCTRL3 */
-				0x00000802 /* EMC_CTT_TERM_CTRL */
-				0x00000000 /* EMC_ZCAL_INTERVAL */
-				0x00000040 /* EMC_ZCAL_WAIT_CNT */
-				0x000c000c /* EMC_MRS_WAIT_CNT */
-				0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
-				0x00000000 /* EMC_CTT */
-				0x00000000 /* EMC_CTT_DURATION */
-				0x80000287 /* EMC_DYN_SELF_REF_CONTROL */
-				0xe8000000 /* EMC_FBIO_SPARE */
-				0xff00ff00 /* EMC_CFG_RSV */
-			>;
-		};
-		timing-51000000 {
-			clock-frequency = <51000000>;
-			nvidia,emc-auto-cal-interval = <0x001fffff>;
-			nvidia,emc-mode-1 = <0x80100003>;
-			nvidia,emc-mode-2 = <0x80200008>;
-			nvidia,emc-mode-reset = <0x80001221>;
-			nvidia,emc-zcal-cnt-long = <0x00000040>;
-			nvidia,emc-cfg-periodic-qrst;
-			nvidia,emc-cfg-dyn-self-ref;
-			nvidia,emc-configuration = <
-				0x00000002 /* EMC_RC */
-				0x0000000d /* EMC_RFC */
-				0x00000001 /* EMC_RAS */
-				0x00000000 /* EMC_RP */
-				0x00000002 /* EMC_R2W */
-				0x0000000a /* EMC_W2R */
-				0x00000005 /* EMC_R2P */
-				0x0000000b /* EMC_W2P */
-				0x00000000 /* EMC_RD_RCD */
-				0x00000000 /* EMC_WR_RCD */
-				0x00000003 /* EMC_RRD */
-				0x00000001 /* EMC_REXT */
-				0x00000000 /* EMC_WEXT */
-				0x00000005 /* EMC_WDV */
-				0x00000005 /* EMC_QUSE */
-				0x00000004 /* EMC_QRST */
-				0x0000000a /* EMC_QSAFE */
-				0x0000000b /* EMC_RDV */
-				0x00000181 /* EMC_REFRESH */
-				0x00000000 /* EMC_BURST_REFRESH_NUM */
-				0x00000060 /* EMC_PRE_REFRESH_REQ_CNT */
-				0x00000002 /* EMC_PDEX2WR */
-				0x00000002 /* EMC_PDEX2RD */
-				0x00000001 /* EMC_PCHG2PDEN */
-				0x00000000 /* EMC_ACT2PDEN */
-				0x00000007 /* EMC_AR2PDEN */
-				0x0000000f /* EMC_RW2PDEN */
-				0x0000000e /* EMC_TXSR */
-				0x0000000e /* EMC_TXSRDLL */
-				0x00000004 /* EMC_TCKE */
-				0x00000003 /* EMC_TFAW */
-				0x00000000 /* EMC_TRPAB */
-				0x00000004 /* EMC_TCLKSTABLE */
-				0x00000005 /* EMC_TCLKSTOP */
-				0x0000018e /* EMC_TREFBW */
-				0x00000006 /* EMC_QUSE_EXTRA */
-				0x00000004 /* EMC_FBIO_CFG6 */
-				0x00000000 /* EMC_ODT_WRITE */
-				0x00000000 /* EMC_ODT_READ */
-				0x00004288 /* EMC_FBIO_CFG5 */
-				0x007800a4 /* EMC_CFG_DIG_DLL */
-				0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
-				0x000fc000 /* EMC_DLL_XFORM_DQS0 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS1 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS2 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS3 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS4 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS5 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS6 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS7 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE0 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE1 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE2 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE3 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE4 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE5 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE6 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE7 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
-				0x000fc000 /* EMC_DLL_XFORM_DQ0 */
-				0x000fc000 /* EMC_DLL_XFORM_DQ1 */
-				0x000fc000 /* EMC_DLL_XFORM_DQ2 */
-				0x000fc000 /* EMC_DLL_XFORM_DQ3 */
-				0x000002a0 /* EMC_XM2CMDPADCTRL */
-				0x0800211c /* EMC_XM2DQSPADCTRL2 */
-				0x00000000 /* EMC_XM2DQPADCTRL2 */
-				0x77fff884 /* EMC_XM2CLKPADCTRL */
-				0x01f1f108 /* EMC_XM2COMPPADCTRL */
-				0x05057404 /* EMC_XM2VTTGENPADCTRL */
-				0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
-				0x08000168 /* EMC_XM2QUSEPADCTRL */
-				0x08000000 /* EMC_XM2DQSPADCTRL3 */
-				0x00000802 /* EMC_CTT_TERM_CTRL */
-				0x00000000 /* EMC_ZCAL_INTERVAL */
-				0x00000040 /* EMC_ZCAL_WAIT_CNT */
-				0x000c000c /* EMC_MRS_WAIT_CNT */
-				0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
-				0x00000000 /* EMC_CTT */
-				0x00000000 /* EMC_CTT_DURATION */
-				0x8000040b /* EMC_DYN_SELF_REF_CONTROL */
-				0xe8000000 /* EMC_FBIO_SPARE */
-				0xff00ff00 /* EMC_CFG_RSV */
-			>;
-		};
-		timing-102000000 {
-			clock-frequency = <102000000>;
-			nvidia,emc-auto-cal-interval = <0x001fffff>;
-			nvidia,emc-mode-1 = <0x80100003>;
-			nvidia,emc-mode-2 = <0x80200008>;
-			nvidia,emc-mode-reset = <0x80001221>;
-			nvidia,emc-zcal-cnt-long = <0x00000040>;
-			nvidia,emc-cfg-periodic-qrst;
-			nvidia,emc-cfg-dyn-self-ref;
-			nvidia,emc-configuration = <
-				0x00000004 /* EMC_RC */
-				0x0000001a /* EMC_RFC */
-				0x00000003 /* EMC_RAS */
-				0x00000001 /* EMC_RP */
-				0x00000002 /* EMC_R2W */
-				0x0000000a /* EMC_W2R */
-				0x00000005 /* EMC_R2P */
-				0x0000000b /* EMC_W2P */
-				0x00000001 /* EMC_RD_RCD */
-				0x00000001 /* EMC_WR_RCD */
-				0x00000003 /* EMC_RRD */
-				0x00000001 /* EMC_REXT */
-				0x00000000 /* EMC_WEXT */
-				0x00000005 /* EMC_WDV */
-				0x00000005 /* EMC_QUSE */
-				0x00000004 /* EMC_QRST */
-				0x0000000a /* EMC_QSAFE */
-				0x0000000b /* EMC_RDV */
-				0x00000303 /* EMC_REFRESH */
-				0x00000000 /* EMC_BURST_REFRESH_NUM */
-				0x000000c0 /* EMC_PRE_REFRESH_REQ_CNT */
-				0x00000002 /* EMC_PDEX2WR */
-				0x00000002 /* EMC_PDEX2RD */
-				0x00000001 /* EMC_PCHG2PDEN */
-				0x00000000 /* EMC_ACT2PDEN */
-				0x00000007 /* EMC_AR2PDEN */
-				0x0000000f /* EMC_RW2PDEN */
-				0x0000001c /* EMC_TXSR */
-				0x0000001c /* EMC_TXSRDLL */
-				0x00000004 /* EMC_TCKE */
-				0x00000005 /* EMC_TFAW */
-				0x00000000 /* EMC_TRPAB */
-				0x00000004 /* EMC_TCLKSTABLE */
-				0x00000005 /* EMC_TCLKSTOP */
-				0x0000031c /* EMC_TREFBW */
-				0x00000006 /* EMC_QUSE_EXTRA */
-				0x00000004 /* EMC_FBIO_CFG6 */
-				0x00000000 /* EMC_ODT_WRITE */
-				0x00000000 /* EMC_ODT_READ */
-				0x00004288 /* EMC_FBIO_CFG5 */
-				0x007800a4 /* EMC_CFG_DIG_DLL */
-				0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
-				0x000fc000 /* EMC_DLL_XFORM_DQS0 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS1 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS2 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS3 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS4 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS5 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS6 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS7 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE0 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE1 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE2 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE3 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE4 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE5 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE6 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE7 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
-				0x000fc000 /* EMC_DLL_XFORM_DQ0 */
-				0x000fc000 /* EMC_DLL_XFORM_DQ1 */
-				0x000fc000 /* EMC_DLL_XFORM_DQ2 */
-				0x000fc000 /* EMC_DLL_XFORM_DQ3 */
-				0x000002a0 /* EMC_XM2CMDPADCTRL */
-				0x0800211c /* EMC_XM2DQSPADCTRL2 */
-				0x00000000 /* EMC_XM2DQPADCTRL2 */
-				0x77fff884 /* EMC_XM2CLKPADCTRL */
-				0x01f1f108 /* EMC_XM2COMPPADCTRL */
-				0x05057404 /* EMC_XM2VTTGENPADCTRL */
-				0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
-				0x08000168 /* EMC_XM2QUSEPADCTRL */
-				0x08000000 /* EMC_XM2DQSPADCTRL3 */
-				0x00000802 /* EMC_CTT_TERM_CTRL */
-				0x00000000 /* EMC_ZCAL_INTERVAL */
-				0x00000040 /* EMC_ZCAL_WAIT_CNT */
-				0x000c000c /* EMC_MRS_WAIT_CNT */
-				0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
-				0x00000000 /* EMC_CTT */
-				0x00000000 /* EMC_CTT_DURATION */
-				0x80000713 /* EMC_DYN_SELF_REF_CONTROL */
-				0xe8000000 /* EMC_FBIO_SPARE */
-				0xff00ff00 /* EMC_CFG_RSV */
-			>;
-		};
-		timing-204000000 {
-			clock-frequency = <204000000>;
-			nvidia,emc-auto-cal-interval = <0x001fffff>;
-			nvidia,emc-mode-1 = <0x80100003>;
-			nvidia,emc-mode-2 = <0x80200008>;
-			nvidia,emc-mode-reset = <0x80001221>;
-			nvidia,emc-zcal-cnt-long = <0x00000040>;
-			nvidia,emc-cfg-periodic-qrst;
-			nvidia,emc-cfg-dyn-self-ref;
-			nvidia,emc-configuration = <
-				0x00000009 /* EMC_RC */
-				0x00000035 /* EMC_RFC */
-				0x00000007 /* EMC_RAS */
-				0x00000002 /* EMC_RP */
-				0x00000002 /* EMC_R2W */
-				0x0000000a /* EMC_W2R */
-				0x00000005 /* EMC_R2P */
-				0x0000000b /* EMC_W2P */
-				0x00000002 /* EMC_RD_RCD */
-				0x00000002 /* EMC_WR_RCD */
-				0x00000003 /* EMC_RRD */
-				0x00000001 /* EMC_REXT */
-				0x00000000 /* EMC_WEXT */
-				0x00000005 /* EMC_WDV */
-				0x00000005 /* EMC_QUSE */
-				0x00000004 /* EMC_QRST */
-				0x0000000a /* EMC_QSAFE */
-				0x0000000b /* EMC_RDV */
-				0x00000607 /* EMC_REFRESH */
-				0x00000000 /* EMC_BURST_REFRESH_NUM */
-				0x00000181 /* EMC_PRE_REFRESH_REQ_CNT */
-				0x00000002 /* EMC_PDEX2WR */
-				0x00000002 /* EMC_PDEX2RD */
-				0x00000001 /* EMC_PCHG2PDEN */
-				0x00000000 /* EMC_ACT2PDEN */
-				0x00000007 /* EMC_AR2PDEN */
-				0x0000000f /* EMC_RW2PDEN */
-				0x00000038 /* EMC_TXSR */
-				0x00000038 /* EMC_TXSRDLL */
-				0x00000004 /* EMC_TCKE */
-				0x00000009 /* EMC_TFAW */
-				0x00000000 /* EMC_TRPAB */
-				0x00000004 /* EMC_TCLKSTABLE */
-				0x00000005 /* EMC_TCLKSTOP */
-				0x00000638 /* EMC_TREFBW */
-				0x00000006 /* EMC_QUSE_EXTRA */
-				0x00000006 /* EMC_FBIO_CFG6 */
-				0x00000000 /* EMC_ODT_WRITE */
-				0x00000000 /* EMC_ODT_READ */
-				0x00004288 /* EMC_FBIO_CFG5 */
-				0x004400a4 /* EMC_CFG_DIG_DLL */
-				0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
-				0x00080000 /* EMC_DLL_XFORM_DQS0 */
-				0x00080000 /* EMC_DLL_XFORM_DQS1 */
-				0x00080000 /* EMC_DLL_XFORM_DQS2 */
-				0x00080000 /* EMC_DLL_XFORM_DQS3 */
-				0x00080000 /* EMC_DLL_XFORM_DQS4 */
-				0x00080000 /* EMC_DLL_XFORM_DQS5 */
-				0x00080000 /* EMC_DLL_XFORM_DQS6 */
-				0x00080000 /* EMC_DLL_XFORM_DQS7 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE0 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE1 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE2 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE3 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE4 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE5 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE6 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE7 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
-				0x00080000 /* EMC_DLL_XFORM_DQ0 */
-				0x00080000 /* EMC_DLL_XFORM_DQ1 */
-				0x00080000 /* EMC_DLL_XFORM_DQ2 */
-				0x00080000 /* EMC_DLL_XFORM_DQ3 */
-				0x000002a0 /* EMC_XM2CMDPADCTRL */
-				0x0800211c /* EMC_XM2DQSPADCTRL2 */
-				0x00000000 /* EMC_XM2DQPADCTRL2 */
-				0x77fff884 /* EMC_XM2CLKPADCTRL */
-				0x01f1f108 /* EMC_XM2COMPPADCTRL */
-				0x05057404 /* EMC_XM2VTTGENPADCTRL */
-				0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
-				0x08000168 /* EMC_XM2QUSEPADCTRL */
-				0x08000000 /* EMC_XM2DQSPADCTRL3 */
-				0x00000802 /* EMC_CTT_TERM_CTRL */
-				0x00020000 /* EMC_ZCAL_INTERVAL */
-				0x00000100 /* EMC_ZCAL_WAIT_CNT */
-				0x000c000c /* EMC_MRS_WAIT_CNT */
-				0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
-				0x00000000 /* EMC_CTT */
-				0x00000000 /* EMC_CTT_DURATION */
-				0x80000d22 /* EMC_DYN_SELF_REF_CONTROL */
-				0xe8000000 /* EMC_FBIO_SPARE */
-				0xff00ff00 /* EMC_CFG_RSV */
-			>;
-		};
-		timing-400000000 {
-			clock-frequency = <400000000>;
-			nvidia,emc-auto-cal-interval = <0x001fffff>;
-			nvidia,emc-mode-1 = <0x80100002>;
-			nvidia,emc-mode-2 = <0x80200000>;
-			nvidia,emc-mode-reset = <0x80000521>;
-			nvidia,emc-zcal-cnt-long = <0x00000040>;
-			nvidia,emc-configuration = <
-				0x00000012 /* EMC_RC */
-				0x00000066 /* EMC_RFC */
-				0x0000000c /* EMC_RAS */
-				0x00000004 /* EMC_RP */
-				0x00000003 /* EMC_R2W */
-				0x00000008 /* EMC_W2R */
-				0x00000002 /* EMC_R2P */
-				0x0000000a /* EMC_W2P */
-				0x00000004 /* EMC_RD_RCD */
-				0x00000004 /* EMC_WR_RCD */
-				0x00000002 /* EMC_RRD */
-				0x00000001 /* EMC_REXT */
-				0x00000000 /* EMC_WEXT */
-				0x00000004 /* EMC_WDV */
-				0x00000006 /* EMC_QUSE */
-				0x00000004 /* EMC_QRST */
-				0x0000000a /* EMC_QSAFE */
-				0x0000000c /* EMC_RDV */
-				0x00000bf0 /* EMC_REFRESH */
-				0x00000000 /* EMC_BURST_REFRESH_NUM */
-				0x000002fc /* EMC_PRE_REFRESH_REQ_CNT */
-				0x00000001 /* EMC_PDEX2WR */
-				0x00000008 /* EMC_PDEX2RD */
-				0x00000001 /* EMC_PCHG2PDEN */
-				0x00000000 /* EMC_ACT2PDEN */
-				0x00000008 /* EMC_AR2PDEN */
-				0x0000000f /* EMC_RW2PDEN */
-				0x0000006c /* EMC_TXSR */
-				0x00000200 /* EMC_TXSRDLL */
-				0x00000004 /* EMC_TCKE */
-				0x00000010 /* EMC_TFAW */
-				0x00000000 /* EMC_TRPAB */
-				0x00000004 /* EMC_TCLKSTABLE */
-				0x00000005 /* EMC_TCLKSTOP */
-				0x00000c30 /* EMC_TREFBW */
-				0x00000000 /* EMC_QUSE_EXTRA */
-				0x00000004 /* EMC_FBIO_CFG6 */
-				0x00000000 /* EMC_ODT_WRITE */
-				0x00000000 /* EMC_ODT_READ */
-				0x00007088 /* EMC_FBIO_CFG5 */
-				0x001d0084 /* EMC_CFG_DIG_DLL */
-				0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
-				0x0003c000 /* EMC_DLL_XFORM_DQS0 */
-				0x0003c000 /* EMC_DLL_XFORM_DQS1 */
-				0x0003c000 /* EMC_DLL_XFORM_DQS2 */
-				0x0003c000 /* EMC_DLL_XFORM_DQS3 */
-				0x0003c000 /* EMC_DLL_XFORM_DQS4 */
-				0x0003c000 /* EMC_DLL_XFORM_DQS5 */
-				0x0003c000 /* EMC_DLL_XFORM_DQS6 */
-				0x0003c000 /* EMC_DLL_XFORM_DQS7 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE0 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE1 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE2 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE3 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE4 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE5 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE6 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE7 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
-				0x00048000 /* EMC_DLL_XFORM_DQ0 */
-				0x00048000 /* EMC_DLL_XFORM_DQ1 */
-				0x00048000 /* EMC_DLL_XFORM_DQ2 */
-				0x00048000 /* EMC_DLL_XFORM_DQ3 */
-				0x000002a0 /* EMC_XM2CMDPADCTRL */
-				0x0800013d /* EMC_XM2DQSPADCTRL2 */
-				0x00000000 /* EMC_XM2DQPADCTRL2 */
-				0x77fff884 /* EMC_XM2CLKPADCTRL */
-				0x01f1f508 /* EMC_XM2COMPPADCTRL */
-				0x05057404 /* EMC_XM2VTTGENPADCTRL */
-				0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
-				0x080001e8 /* EMC_XM2QUSEPADCTRL */
-				0x08000021 /* EMC_XM2DQSPADCTRL3 */
-				0x00000802 /* EMC_CTT_TERM_CTRL */
-				0x00020000 /* EMC_ZCAL_INTERVAL */
-				0x00000100 /* EMC_ZCAL_WAIT_CNT */
-				0x0158000c /* EMC_MRS_WAIT_CNT */
-				0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
-				0x00000000 /* EMC_CTT */
-				0x00000000 /* EMC_CTT_DURATION */
-				0x800018c8 /* EMC_DYN_SELF_REF_CONTROL */
-				0xe8000000 /* EMC_FBIO_SPARE */
-				0xff00ff89 /* EMC_CFG_RSV */
-			>;
-		};
-		timing-800000000 {
-			clock-frequency = <800000000>;
-			nvidia,emc-auto-cal-interval = <0x001fffff>;
-			nvidia,emc-mode-1 = <0x80100002>;
-			nvidia,emc-mode-2 = <0x80200018>;
-			nvidia,emc-mode-reset = <0x80000d71>;
-			nvidia,emc-zcal-cnt-long = <0x00000040>;
-			nvidia,emc-cfg-periodic-qrst;
-			nvidia,emc-configuration = <
-				0x00000025 /* EMC_RC */
-				0x000000ce /* EMC_RFC */
-				0x0000001a /* EMC_RAS */
-				0x00000009 /* EMC_RP */
-				0x00000005 /* EMC_R2W */
-				0x0000000d /* EMC_W2R */
-				0x00000004 /* EMC_R2P */
-				0x00000013 /* EMC_W2P */
-				0x00000009 /* EMC_RD_RCD */
-				0x00000009 /* EMC_WR_RCD */
-				0x00000004 /* EMC_RRD */
-				0x00000001 /* EMC_REXT */
-				0x00000000 /* EMC_WEXT */
-				0x00000007 /* EMC_WDV */
-				0x0000000a /* EMC_QUSE */
-				0x00000009 /* EMC_QRST */
-				0x0000000b /* EMC_QSAFE */
-				0x00000011 /* EMC_RDV */
-				0x00001820 /* EMC_REFRESH */
-				0x00000000 /* EMC_BURST_REFRESH_NUM */
-				0x00000608 /* EMC_PRE_REFRESH_REQ_CNT */
-				0x00000003 /* EMC_PDEX2WR */
-				0x00000012 /* EMC_PDEX2RD */
-				0x00000001 /* EMC_PCHG2PDEN */
-				0x00000000 /* EMC_ACT2PDEN */
-				0x0000000f /* EMC_AR2PDEN */
-				0x00000018 /* EMC_RW2PDEN */
-				0x000000d8 /* EMC_TXSR */
-				0x00000200 /* EMC_TXSRDLL */
-				0x00000005 /* EMC_TCKE */
-				0x00000020 /* EMC_TFAW */
-				0x00000000 /* EMC_TRPAB */
-				0x00000007 /* EMC_TCLKSTABLE */
-				0x00000008 /* EMC_TCLKSTOP */
-				0x00001860 /* EMC_TREFBW */
-				0x0000000b /* EMC_QUSE_EXTRA */
-				0x00000006 /* EMC_FBIO_CFG6 */
-				0x00000000 /* EMC_ODT_WRITE */
-				0x00000000 /* EMC_ODT_READ */
-				0x00005088 /* EMC_FBIO_CFG5 */
-				0xf0070191 /* EMC_CFG_DIG_DLL */
-				0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
-				0x0000800a /* EMC_DLL_XFORM_DQS0 */
-				0x0000000a /* EMC_DLL_XFORM_DQS1 */
-				0x0000000a /* EMC_DLL_XFORM_DQS2 */
-				0x0000000a /* EMC_DLL_XFORM_DQS3 */
-				0x0000000a /* EMC_DLL_XFORM_DQS4 */
-				0x0000000a /* EMC_DLL_XFORM_DQS5 */
-				0x0000000a /* EMC_DLL_XFORM_DQS6 */
-				0x0000000a /* EMC_DLL_XFORM_DQS7 */
-				0x00018000 /* EMC_DLL_XFORM_QUSE0 */
-				0x00018000 /* EMC_DLL_XFORM_QUSE1 */
-				0x00018000 /* EMC_DLL_XFORM_QUSE2 */
-				0x00018000 /* EMC_DLL_XFORM_QUSE3 */
-				0x00018000 /* EMC_DLL_XFORM_QUSE4 */
-				0x00018000 /* EMC_DLL_XFORM_QUSE5 */
-				0x00018000 /* EMC_DLL_XFORM_QUSE6 */
-				0x00018000 /* EMC_DLL_XFORM_QUSE7 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
-				0x0000000a /* EMC_DLL_XFORM_DQ0 */
-				0x0000000a /* EMC_DLL_XFORM_DQ1 */
-				0x0000000a /* EMC_DLL_XFORM_DQ2 */
-				0x0000000a /* EMC_DLL_XFORM_DQ3 */
-				0x000002a0 /* EMC_XM2CMDPADCTRL */
-				0x0600013d /* EMC_XM2DQSPADCTRL2 */
-				0x22220000 /* EMC_XM2DQPADCTRL2 */
-				0x77fff884 /* EMC_XM2CLKPADCTRL */
-				0x01f1f501 /* EMC_XM2COMPPADCTRL */
-				0x07077404 /* EMC_XM2VTTGENPADCTRL */
-				0x54000000 /* EMC_XM2VTTGENPADCTRL2 */
-				0x080001e8 /* EMC_XM2QUSEPADCTRL */
-				0x08000021 /* EMC_XM2DQSPADCTRL3 */
-				0x00000802 /* EMC_CTT_TERM_CTRL */
-				0x00020000 /* EMC_ZCAL_INTERVAL */
-				0x00000100 /* EMC_ZCAL_WAIT_CNT */
-				0x00f0000c /* EMC_MRS_WAIT_CNT */
-				0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
-				0x00000000 /* EMC_CTT */
-				0x00000000 /* EMC_CTT_DURATION */
-				0x8000308c /* EMC_DYN_SELF_REF_CONTROL */
-				0xe8000000 /* EMC_FBIO_SPARE */
-				0xff00ff49 /* EMC_CFG_RSV */
-			>;
-		};
-	};
-	emc-timings-1 {
-		nvidia,ram-code = <1>;  /* Hynix M RAM */
-		timing-25500000 {
-			clock-frequency = <25500000>;
-			nvidia,emc-auto-cal-interval = <0x001fffff>;
-			nvidia,emc-mode-1 = <0x80100003>;
-			nvidia,emc-mode-2 = <0x80200008>;
-			nvidia,emc-mode-reset = <0x80001221>;
-			nvidia,emc-zcal-cnt-long = <0x00000040>;
-			nvidia,emc-cfg-periodic-qrst;
-			nvidia,emc-cfg-dyn-self-ref;
-			nvidia,emc-configuration = <
-				0x00000001 /* EMC_RC */
-				0x00000006 /* EMC_RFC */
-				0x00000000 /* EMC_RAS */
-				0x00000000 /* EMC_RP */
-				0x00000002 /* EMC_R2W */
-				0x0000000a /* EMC_W2R */
-				0x00000005 /* EMC_R2P */
-				0x0000000b /* EMC_W2P */
-				0x00000000 /* EMC_RD_RCD */
-				0x00000000 /* EMC_WR_RCD */
-				0x00000003 /* EMC_RRD */
-				0x00000001 /* EMC_REXT */
-				0x00000000 /* EMC_WEXT */
-				0x00000005 /* EMC_WDV */
-				0x00000005 /* EMC_QUSE */
-				0x00000004 /* EMC_QRST */
-				0x0000000a /* EMC_QSAFE */
-				0x0000000b /* EMC_RDV */
-				0x000000c0 /* EMC_REFRESH */
-				0x00000000 /* EMC_BURST_REFRESH_NUM */
-				0x00000030 /* EMC_PRE_REFRESH_REQ_CNT */
-				0x00000002 /* EMC_PDEX2WR */
-				0x00000002 /* EMC_PDEX2RD */
-				0x00000001 /* EMC_PCHG2PDEN */
-				0x00000000 /* EMC_ACT2PDEN */
-				0x00000007 /* EMC_AR2PDEN */
-				0x0000000f /* EMC_RW2PDEN */
-				0x00000007 /* EMC_TXSR */
-				0x00000007 /* EMC_TXSRDLL */
-				0x00000004 /* EMC_TCKE */
-				0x00000002 /* EMC_TFAW */
-				0x00000000 /* EMC_TRPAB */
-				0x00000004 /* EMC_TCLKSTABLE */
-				0x00000005 /* EMC_TCLKSTOP */
-				0x000000c7 /* EMC_TREFBW */
-				0x00000006 /* EMC_QUSE_EXTRA */
-				0x00000004 /* EMC_FBIO_CFG6 */
-				0x00000000 /* EMC_ODT_WRITE */
-				0x00000000 /* EMC_ODT_READ */
-				0x00004288 /* EMC_FBIO_CFG5 */
-				0x007800a4 /* EMC_CFG_DIG_DLL */
-				0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
-				0x000fc000 /* EMC_DLL_XFORM_DQS0 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS1 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS2 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS3 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS4 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS5 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS6 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS7 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE0 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE1 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE2 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE3 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE4 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE5 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE6 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE7 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
-				0x000fc000 /* EMC_DLL_XFORM_DQ0 */
-				0x000fc000 /* EMC_DLL_XFORM_DQ1 */
-				0x000fc000 /* EMC_DLL_XFORM_DQ2 */
-				0x000fc000 /* EMC_DLL_XFORM_DQ3 */
-				0x000002a0 /* EMC_XM2CMDPADCTRL */
-				0x0800211c /* EMC_XM2DQSPADCTRL2 */
-				0x00000000 /* EMC_XM2DQPADCTRL2 */
-				0x77fff884 /* EMC_XM2CLKPADCTRL */
-				0x01f1f108 /* EMC_XM2COMPPADCTRL */
-				0x05057404 /* EMC_XM2VTTGENPADCTRL */
-				0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
-				0x08000168 /* EMC_XM2QUSEPADCTRL */
-				0x08000000 /* EMC_XM2DQSPADCTRL3 */
-				0x00000802 /* EMC_CTT_TERM_CTRL */
-				0x00000000 /* EMC_ZCAL_INTERVAL */
-				0x00000040 /* EMC_ZCAL_WAIT_CNT */
-				0x000c000c /* EMC_MRS_WAIT_CNT */
-				0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
-				0x00000000 /* EMC_CTT */
-				0x00000000 /* EMC_CTT_DURATION */
-				0x80000287 /* EMC_DYN_SELF_REF_CONTROL */
-				0xe8000000 /* EMC_FBIO_SPARE */
-				0xff00ff00 /* EMC_CFG_RSV */
-			>;
-		};
-		timing-51000000 {
-			clock-frequency = <51000000>;
-			nvidia,emc-auto-cal-interval = <0x001fffff>;
-			nvidia,emc-mode-1 = <0x80100003>;
-			nvidia,emc-mode-2 = <0x80200008>;
-			nvidia,emc-mode-reset = <0x80001221>;
-			nvidia,emc-zcal-cnt-long = <0x00000040>;
-			nvidia,emc-cfg-periodic-qrst;
-			nvidia,emc-cfg-dyn-self-ref;
-			nvidia,emc-configuration = <
-				0x00000002 /* EMC_RC */
-				0x0000000d /* EMC_RFC */
-				0x00000001 /* EMC_RAS */
-				0x00000000 /* EMC_RP */
-				0x00000002 /* EMC_R2W */
-				0x0000000a /* EMC_W2R */
-				0x00000005 /* EMC_R2P */
-				0x0000000b /* EMC_W2P */
-				0x00000000 /* EMC_RD_RCD */
-				0x00000000 /* EMC_WR_RCD */
-				0x00000003 /* EMC_RRD */
-				0x00000001 /* EMC_REXT */
-				0x00000000 /* EMC_WEXT */
-				0x00000005 /* EMC_WDV */
-				0x00000005 /* EMC_QUSE */
-				0x00000004 /* EMC_QRST */
-				0x0000000a /* EMC_QSAFE */
-				0x0000000b /* EMC_RDV */
-				0x00000181 /* EMC_REFRESH */
-				0x00000000 /* EMC_BURST_REFRESH_NUM */
-				0x00000060 /* EMC_PRE_REFRESH_REQ_CNT */
-				0x00000002 /* EMC_PDEX2WR */
-				0x00000002 /* EMC_PDEX2RD */
-				0x00000001 /* EMC_PCHG2PDEN */
-				0x00000000 /* EMC_ACT2PDEN */
-				0x00000007 /* EMC_AR2PDEN */
-				0x0000000f /* EMC_RW2PDEN */
-				0x0000000e /* EMC_TXSR */
-				0x0000000e /* EMC_TXSRDLL */
-				0x00000004 /* EMC_TCKE */
-				0x00000003 /* EMC_TFAW */
-				0x00000000 /* EMC_TRPAB */
-				0x00000004 /* EMC_TCLKSTABLE */
-				0x00000005 /* EMC_TCLKSTOP */
-				0x0000018e /* EMC_TREFBW */
-				0x00000006 /* EMC_QUSE_EXTRA */
-				0x00000004 /* EMC_FBIO_CFG6 */
-				0x00000000 /* EMC_ODT_WRITE */
-				0x00000000 /* EMC_ODT_READ */
-				0x00004288 /* EMC_FBIO_CFG5 */
-				0x007800a4 /* EMC_CFG_DIG_DLL */
-				0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
-				0x000fc000 /* EMC_DLL_XFORM_DQS0 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS1 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS2 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS3 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS4 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS5 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS6 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS7 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE0 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE1 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE2 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE3 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE4 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE5 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE6 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE7 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
-				0x000fc000 /* EMC_DLL_XFORM_DQ0 */
-				0x000fc000 /* EMC_DLL_XFORM_DQ1 */
-				0x000fc000 /* EMC_DLL_XFORM_DQ2 */
-				0x000fc000 /* EMC_DLL_XFORM_DQ3 */
-				0x000002a0 /* EMC_XM2CMDPADCTRL */
-				0x0800211c /* EMC_XM2DQSPADCTRL2 */
-				0x00000000 /* EMC_XM2DQPADCTRL2 */
-				0x77fff884 /* EMC_XM2CLKPADCTRL */
-				0x01f1f108 /* EMC_XM2COMPPADCTRL */
-				0x05057404 /* EMC_XM2VTTGENPADCTRL */
-				0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
-				0x08000168 /* EMC_XM2QUSEPADCTRL */
-				0x08000000 /* EMC_XM2DQSPADCTRL3 */
-				0x00000802 /* EMC_CTT_TERM_CTRL */
-				0x00000000 /* EMC_ZCAL_INTERVAL */
-				0x00000040 /* EMC_ZCAL_WAIT_CNT */
-				0x000c000c /* EMC_MRS_WAIT_CNT */
-				0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
-				0x00000000 /* EMC_CTT */
-				0x00000000 /* EMC_CTT_DURATION */
-				0x8000040b /* EMC_DYN_SELF_REF_CONTROL */
-				0xe8000000 /* EMC_FBIO_SPARE */
-				0xff00ff00 /* EMC_CFG_RSV */
-			>;
-		};
-		timing-102000000 {
-			clock-frequency = <102000000>;
-			nvidia,emc-auto-cal-interval = <0x001fffff>;
-			nvidia,emc-mode-1 = <0x80100003>;
-			nvidia,emc-mode-2 = <0x80200008>;
-			nvidia,emc-mode-reset = <0x80001221>;
-			nvidia,emc-zcal-cnt-long = <0x00000040>;
-			nvidia,emc-cfg-periodic-qrst;
-			nvidia,emc-cfg-dyn-self-ref;
-			nvidia,emc-configuration = <
-				0x00000004 /* EMC_RC */
-				0x0000001a /* EMC_RFC */
-				0x00000003 /* EMC_RAS */
-				0x00000001 /* EMC_RP */
-				0x00000002 /* EMC_R2W */
-				0x0000000a /* EMC_W2R */
-				0x00000005 /* EMC_R2P */
-				0x0000000b /* EMC_W2P */
-				0x00000001 /* EMC_RD_RCD */
-				0x00000001 /* EMC_WR_RCD */
-				0x00000003 /* EMC_RRD */
-				0x00000001 /* EMC_REXT */
-				0x00000000 /* EMC_WEXT */
-				0x00000005 /* EMC_WDV */
-				0x00000005 /* EMC_QUSE */
-				0x00000004 /* EMC_QRST */
-				0x0000000a /* EMC_QSAFE */
-				0x0000000b /* EMC_RDV */
-				0x00000303 /* EMC_REFRESH */
-				0x00000000 /* EMC_BURST_REFRESH_NUM */
-				0x000000c0 /* EMC_PRE_REFRESH_REQ_CNT */
-				0x00000002 /* EMC_PDEX2WR */
-				0x00000002 /* EMC_PDEX2RD */
-				0x00000001 /* EMC_PCHG2PDEN */
-				0x00000000 /* EMC_ACT2PDEN */
-				0x00000007 /* EMC_AR2PDEN */
-				0x0000000f /* EMC_RW2PDEN */
-				0x0000001c /* EMC_TXSR */
-				0x0000001c /* EMC_TXSRDLL */
-				0x00000004 /* EMC_TCKE */
-				0x00000005 /* EMC_TFAW */
-				0x00000000 /* EMC_TRPAB */
-				0x00000004 /* EMC_TCLKSTABLE */
-				0x00000005 /* EMC_TCLKSTOP */
-				0x0000031c /* EMC_TREFBW */
-				0x00000006 /* EMC_QUSE_EXTRA */
-				0x00000004 /* EMC_FBIO_CFG6 */
-				0x00000000 /* EMC_ODT_WRITE */
-				0x00000000 /* EMC_ODT_READ */
-				0x00004288 /* EMC_FBIO_CFG5 */
-				0x007800a4 /* EMC_CFG_DIG_DLL */
-				0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
-				0x000fc000 /* EMC_DLL_XFORM_DQS0 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS1 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS2 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS3 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS4 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS5 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS6 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS7 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE0 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE1 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE2 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE3 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE4 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE5 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE6 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE7 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
-				0x000fc000 /* EMC_DLL_XFORM_DQ0 */
-				0x000fc000 /* EMC_DLL_XFORM_DQ1 */
-				0x000fc000 /* EMC_DLL_XFORM_DQ2 */
-				0x000fc000 /* EMC_DLL_XFORM_DQ3 */
-				0x000002a0 /* EMC_XM2CMDPADCTRL */
-				0x0800211c /* EMC_XM2DQSPADCTRL2 */
-				0x00000000 /* EMC_XM2DQPADCTRL2 */
-				0x77fff884 /* EMC_XM2CLKPADCTRL */
-				0x01f1f108 /* EMC_XM2COMPPADCTRL */
-				0x05057404 /* EMC_XM2VTTGENPADCTRL */
-				0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
-				0x08000168 /* EMC_XM2QUSEPADCTRL */
-				0x08000000 /* EMC_XM2DQSPADCTRL3 */
-				0x00000802 /* EMC_CTT_TERM_CTRL */
-				0x00000000 /* EMC_ZCAL_INTERVAL */
-				0x00000040 /* EMC_ZCAL_WAIT_CNT */
-				0x000c000c /* EMC_MRS_WAIT_CNT */
-				0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
-				0x00000000 /* EMC_CTT */
-				0x00000000 /* EMC_CTT_DURATION */
-				0x80000713 /* EMC_DYN_SELF_REF_CONTROL */
-				0xe8000000 /* EMC_FBIO_SPARE */
-				0xff00ff00 /* EMC_CFG_RSV */
-			>;
-		};
-		timing-204000000 {
-			clock-frequency = <204000000>;
-			nvidia,emc-auto-cal-interval = <0x001fffff>;
-			nvidia,emc-mode-1 = <0x80100003>;
-			nvidia,emc-mode-2 = <0x80200008>;
-			nvidia,emc-mode-reset = <0x80001221>;
-			nvidia,emc-zcal-cnt-long = <0x00000040>;
-			nvidia,emc-cfg-periodic-qrst;
-			nvidia,emc-cfg-dyn-self-ref;
-			nvidia,emc-configuration = <
-				0x00000009 /* EMC_RC */
-				0x00000035 /* EMC_RFC */
-				0x00000007 /* EMC_RAS */
-				0x00000002 /* EMC_RP */
-				0x00000002 /* EMC_R2W */
-				0x0000000a /* EMC_W2R */
-				0x00000005 /* EMC_R2P */
-				0x0000000b /* EMC_W2P */
-				0x00000002 /* EMC_RD_RCD */
-				0x00000002 /* EMC_WR_RCD */
-				0x00000003 /* EMC_RRD */
-				0x00000001 /* EMC_REXT */
-				0x00000000 /* EMC_WEXT */
-				0x00000005 /* EMC_WDV */
-				0x00000005 /* EMC_QUSE */
-				0x00000004 /* EMC_QRST */
-				0x0000000a /* EMC_QSAFE */
-				0x0000000b /* EMC_RDV */
-				0x00000607 /* EMC_REFRESH */
-				0x00000000 /* EMC_BURST_REFRESH_NUM */
-				0x00000181 /* EMC_PRE_REFRESH_REQ_CNT */
-				0x00000002 /* EMC_PDEX2WR */
-				0x00000002 /* EMC_PDEX2RD */
-				0x00000001 /* EMC_PCHG2PDEN */
-				0x00000000 /* EMC_ACT2PDEN */
-				0x00000007 /* EMC_AR2PDEN */
-				0x0000000f /* EMC_RW2PDEN */
-				0x00000038 /* EMC_TXSR */
-				0x00000038 /* EMC_TXSRDLL */
-				0x00000004 /* EMC_TCKE */
-				0x00000009 /* EMC_TFAW */
-				0x00000000 /* EMC_TRPAB */
-				0x00000004 /* EMC_TCLKSTABLE */
-				0x00000005 /* EMC_TCLKSTOP */
-				0x00000638 /* EMC_TREFBW */
-				0x00000006 /* EMC_QUSE_EXTRA */
-				0x00000006 /* EMC_FBIO_CFG6 */
-				0x00000000 /* EMC_ODT_WRITE */
-				0x00000000 /* EMC_ODT_READ */
-				0x00004288 /* EMC_FBIO_CFG5 */
-				0x004400a4 /* EMC_CFG_DIG_DLL */
-				0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
-				0x00080000 /* EMC_DLL_XFORM_DQS0 */
-				0x00080000 /* EMC_DLL_XFORM_DQS1 */
-				0x00080000 /* EMC_DLL_XFORM_DQS2 */
-				0x00080000 /* EMC_DLL_XFORM_DQS3 */
-				0x00080000 /* EMC_DLL_XFORM_DQS4 */
-				0x00080000 /* EMC_DLL_XFORM_DQS5 */
-				0x00080000 /* EMC_DLL_XFORM_DQS6 */
-				0x00080000 /* EMC_DLL_XFORM_DQS7 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE0 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE1 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE2 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE3 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE4 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE5 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE6 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE7 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
-				0x00080000 /* EMC_DLL_XFORM_DQ0 */
-				0x00080000 /* EMC_DLL_XFORM_DQ1 */
-				0x00080000 /* EMC_DLL_XFORM_DQ2 */
-				0x00080000 /* EMC_DLL_XFORM_DQ3 */
-				0x000002a0 /* EMC_XM2CMDPADCTRL */
-				0x0800211c /* EMC_XM2DQSPADCTRL2 */
-				0x00000000 /* EMC_XM2DQPADCTRL2 */
-				0x77fff884 /* EMC_XM2CLKPADCTRL */
-				0x01f1f108 /* EMC_XM2COMPPADCTRL */
-				0x05057404 /* EMC_XM2VTTGENPADCTRL */
-				0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
-				0x08000168 /* EMC_XM2QUSEPADCTRL */
-				0x08000000 /* EMC_XM2DQSPADCTRL3 */
-				0x00000802 /* EMC_CTT_TERM_CTRL */
-				0x00020000 /* EMC_ZCAL_INTERVAL */
-				0x00000100 /* EMC_ZCAL_WAIT_CNT */
-				0x000c000c /* EMC_MRS_WAIT_CNT */
-				0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
-				0x00000000 /* EMC_CTT */
-				0x00000000 /* EMC_CTT_DURATION */
-				0x80000d22 /* EMC_DYN_SELF_REF_CONTROL */
-				0xe8000000 /* EMC_FBIO_SPARE */
-				0xff00ff00 /* EMC_CFG_RSV */
-			>;
-		};
-		timing-400000000 {
-			clock-frequency = <400000000>;
-			nvidia,emc-auto-cal-interval = <0x001fffff>;
-			nvidia,emc-mode-1 = <0x80100002>;
-			nvidia,emc-mode-2 = <0x80200000>;
-			nvidia,emc-mode-reset = <0x80000521>;
-			nvidia,emc-zcal-cnt-long = <0x00000040>;
-			nvidia,emc-configuration = <
-				0x00000012 /* EMC_RC */
-				0x00000066 /* EMC_RFC */
-				0x0000000c /* EMC_RAS */
-				0x00000004 /* EMC_RP */
-				0x00000003 /* EMC_R2W */
-				0x00000008 /* EMC_W2R */
-				0x00000002 /* EMC_R2P */
-				0x0000000a /* EMC_W2P */
-				0x00000004 /* EMC_RD_RCD */
-				0x00000004 /* EMC_WR_RCD */
-				0x00000002 /* EMC_RRD */
-				0x00000001 /* EMC_REXT */
-				0x00000000 /* EMC_WEXT */
-				0x00000004 /* EMC_WDV */
-				0x00000006 /* EMC_QUSE */
-				0x00000004 /* EMC_QRST */
-				0x0000000a /* EMC_QSAFE */
-				0x0000000c /* EMC_RDV */
-				0x00000bf0 /* EMC_REFRESH */
-				0x00000000 /* EMC_BURST_REFRESH_NUM */
-				0x000002fc /* EMC_PRE_REFRESH_REQ_CNT */
-				0x00000001 /* EMC_PDEX2WR */
-				0x00000008 /* EMC_PDEX2RD */
-				0x00000001 /* EMC_PCHG2PDEN */
-				0x00000000 /* EMC_ACT2PDEN */
-				0x00000008 /* EMC_AR2PDEN */
-				0x0000000f /* EMC_RW2PDEN */
-				0x0000006c /* EMC_TXSR */
-				0x00000200 /* EMC_TXSRDLL */
-				0x00000004 /* EMC_TCKE */
-				0x00000010 /* EMC_TFAW */
-				0x00000000 /* EMC_TRPAB */
-				0x00000004 /* EMC_TCLKSTABLE */
-				0x00000005 /* EMC_TCLKSTOP */
-				0x00000c30 /* EMC_TREFBW */
-				0x00000000 /* EMC_QUSE_EXTRA */
-				0x00000004 /* EMC_FBIO_CFG6 */
-				0x00000000 /* EMC_ODT_WRITE */
-				0x00000000 /* EMC_ODT_READ */
-				0x00007088 /* EMC_FBIO_CFG5 */
-				0x001d0084 /* EMC_CFG_DIG_DLL */
-				0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
-				0x0003c000 /* EMC_DLL_XFORM_DQS0 */
-				0x0003c000 /* EMC_DLL_XFORM_DQS1 */
-				0x0003c000 /* EMC_DLL_XFORM_DQS2 */
-				0x0003c000 /* EMC_DLL_XFORM_DQS3 */
-				0x0003c000 /* EMC_DLL_XFORM_DQS4 */
-				0x0003c000 /* EMC_DLL_XFORM_DQS5 */
-				0x0003c000 /* EMC_DLL_XFORM_DQS6 */
-				0x0003c000 /* EMC_DLL_XFORM_DQS7 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE0 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE1 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE2 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE3 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE4 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE5 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE6 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE7 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
-				0x00048000 /* EMC_DLL_XFORM_DQ0 */
-				0x00048000 /* EMC_DLL_XFORM_DQ1 */
-				0x00048000 /* EMC_DLL_XFORM_DQ2 */
-				0x00048000 /* EMC_DLL_XFORM_DQ3 */
-				0x000002a0 /* EMC_XM2CMDPADCTRL */
-				0x0800013d /* EMC_XM2DQSPADCTRL2 */
-				0x00000000 /* EMC_XM2DQPADCTRL2 */
-				0x77fff884 /* EMC_XM2CLKPADCTRL */
-				0x01f1f508 /* EMC_XM2COMPPADCTRL */
-				0x05057404 /* EMC_XM2VTTGENPADCTRL */
-				0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
-				0x080001e8 /* EMC_XM2QUSEPADCTRL */
-				0x08000021 /* EMC_XM2DQSPADCTRL3 */
-				0x00000802 /* EMC_CTT_TERM_CTRL */
-				0x00020000 /* EMC_ZCAL_INTERVAL */
-				0x00000100 /* EMC_ZCAL_WAIT_CNT */
-				0x0158000c /* EMC_MRS_WAIT_CNT */
-				0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
-				0x00000000 /* EMC_CTT */
-				0x00000000 /* EMC_CTT_DURATION */
-				0x800018c8 /* EMC_DYN_SELF_REF_CONTROL */
-				0xe8000000 /* EMC_FBIO_SPARE */
-				0xff00ff89 /* EMC_CFG_RSV */
-			>;
-		};
-		timing-800000000 {
-			clock-frequency = <800000000>;
-			nvidia,emc-auto-cal-interval = <0x001fffff>;
-			nvidia,emc-mode-1 = <0x80100002>;
-			nvidia,emc-mode-2 = <0x80200018>;
-			nvidia,emc-mode-reset = <0x80000d71>;
-			nvidia,emc-zcal-cnt-long = <0x00000040>;
-			nvidia,emc-cfg-periodic-qrst;
-			nvidia,emc-configuration = <
-				0x00000025 /* EMC_RC */
-				0x000000ce /* EMC_RFC */
-				0x0000001a /* EMC_RAS */
-				0x00000009 /* EMC_RP */
-				0x00000005 /* EMC_R2W */
-				0x0000000d /* EMC_W2R */
-				0x00000004 /* EMC_R2P */
-				0x00000013 /* EMC_W2P */
-				0x00000009 /* EMC_RD_RCD */
-				0x00000009 /* EMC_WR_RCD */
-				0x00000004 /* EMC_RRD */
-				0x00000001 /* EMC_REXT */
-				0x00000000 /* EMC_WEXT */
-				0x00000007 /* EMC_WDV */
-				0x0000000a /* EMC_QUSE */
-				0x00000009 /* EMC_QRST */
-				0x0000000b /* EMC_QSAFE */
-				0x00000011 /* EMC_RDV */
-				0x00001820 /* EMC_REFRESH */
-				0x00000000 /* EMC_BURST_REFRESH_NUM */
-				0x00000608 /* EMC_PRE_REFRESH_REQ_CNT */
-				0x00000003 /* EMC_PDEX2WR */
-				0x00000012 /* EMC_PDEX2RD */
-				0x00000001 /* EMC_PCHG2PDEN */
-				0x00000000 /* EMC_ACT2PDEN */
-				0x0000000f /* EMC_AR2PDEN */
-				0x00000018 /* EMC_RW2PDEN */
-				0x000000d8 /* EMC_TXSR */
-				0x00000200 /* EMC_TXSRDLL */
-				0x00000005 /* EMC_TCKE */
-				0x00000020 /* EMC_TFAW */
-				0x00000000 /* EMC_TRPAB */
-				0x00000007 /* EMC_TCLKSTABLE */
-				0x00000008 /* EMC_TCLKSTOP */
-				0x00001860 /* EMC_TREFBW */
-				0x0000000b /* EMC_QUSE_EXTRA */
-				0x00000006 /* EMC_FBIO_CFG6 */
-				0x00000000 /* EMC_ODT_WRITE */
-				0x00000000 /* EMC_ODT_READ */
-				0x00005088 /* EMC_FBIO_CFG5 */
-				0xf0070191 /* EMC_CFG_DIG_DLL */
-				0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
-				0x0000800a /* EMC_DLL_XFORM_DQS0 */
-				0x0000000a /* EMC_DLL_XFORM_DQS1 */
-				0x0000000a /* EMC_DLL_XFORM_DQS2 */
-				0x0000000a /* EMC_DLL_XFORM_DQS3 */
-				0x0000000a /* EMC_DLL_XFORM_DQS4 */
-				0x0000000a /* EMC_DLL_XFORM_DQS5 */
-				0x0000000a /* EMC_DLL_XFORM_DQS6 */
-				0x0000000a /* EMC_DLL_XFORM_DQS7 */
-				0x00018000 /* EMC_DLL_XFORM_QUSE0 */
-				0x00018000 /* EMC_DLL_XFORM_QUSE1 */
-				0x00018000 /* EMC_DLL_XFORM_QUSE2 */
-				0x00018000 /* EMC_DLL_XFORM_QUSE3 */
-				0x00018000 /* EMC_DLL_XFORM_QUSE4 */
-				0x00018000 /* EMC_DLL_XFORM_QUSE5 */
-				0x00018000 /* EMC_DLL_XFORM_QUSE6 */
-				0x00018000 /* EMC_DLL_XFORM_QUSE7 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
-				0x0000000a /* EMC_DLL_XFORM_DQ0 */
-				0x0000000a /* EMC_DLL_XFORM_DQ1 */
-				0x0000000a /* EMC_DLL_XFORM_DQ2 */
-				0x0000000a /* EMC_DLL_XFORM_DQ3 */
-				0x000002a0 /* EMC_XM2CMDPADCTRL */
-				0x0600013d /* EMC_XM2DQSPADCTRL2 */
-				0x22220000 /* EMC_XM2DQPADCTRL2 */
-				0x77fff884 /* EMC_XM2CLKPADCTRL */
-				0x01f1f501 /* EMC_XM2COMPPADCTRL */
-				0x07077404 /* EMC_XM2VTTGENPADCTRL */
-				0x54000000 /* EMC_XM2VTTGENPADCTRL2 */
-				0x080001e8 /* EMC_XM2QUSEPADCTRL */
-				0x08000021 /* EMC_XM2DQSPADCTRL3 */
-				0x00000802 /* EMC_CTT_TERM_CTRL */
-				0x00020000 /* EMC_ZCAL_INTERVAL */
-				0x00000100 /* EMC_ZCAL_WAIT_CNT */
-				0x00f0000c /* EMC_MRS_WAIT_CNT */
-				0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
-				0x00000000 /* EMC_CTT */
-				0x00000000 /* EMC_CTT_DURATION */
-				0x8000308c /* EMC_DYN_SELF_REF_CONTROL */
-				0xe8000000 /* EMC_FBIO_SPARE */
-				0xff00ff49 /* EMC_CFG_RSV */
-			>;
-		};
-	};
-	emc-timings-2 {
-		nvidia,ram-code = <2>;  /* Hynix A RAM */
-		timing-25500000 {
-			clock-frequency = <25500000>;
-			nvidia,emc-auto-cal-interval = <0x001fffff>;
-			nvidia,emc-mode-1 = <0x80100003>;
-			nvidia,emc-mode-2 = <0x80200008>;
-			nvidia,emc-mode-reset = <0x80001221>;
-			nvidia,emc-zcal-cnt-long = <0x00000040>;
-			nvidia,emc-cfg-periodic-qrst;
-			nvidia,emc-cfg-dyn-self-ref;
-			nvidia,emc-configuration = <
-				0x00000001 /* EMC_RC */
-				0x00000007 /* EMC_RFC */
-				0x00000000 /* EMC_RAS */
-				0x00000000 /* EMC_RP */
-				0x00000002 /* EMC_R2W */
-				0x0000000a /* EMC_W2R */
-				0x00000005 /* EMC_R2P */
-				0x0000000b /* EMC_W2P */
-				0x00000000 /* EMC_RD_RCD */
-				0x00000000 /* EMC_WR_RCD */
-				0x00000003 /* EMC_RRD */
-				0x00000001 /* EMC_REXT */
-				0x00000000 /* EMC_WEXT */
-				0x00000005 /* EMC_WDV */
-				0x00000005 /* EMC_QUSE */
-				0x00000004 /* EMC_QRST */
-				0x0000000a /* EMC_QSAFE */
-				0x0000000b /* EMC_RDV */
-				0x000000c0 /* EMC_REFRESH */
-				0x00000000 /* EMC_BURST_REFRESH_NUM */
-				0x00000030 /* EMC_PRE_REFRESH_REQ_CNT */
-				0x00000002 /* EMC_PDEX2WR */
-				0x00000002 /* EMC_PDEX2RD */
-				0x00000001 /* EMC_PCHG2PDEN */
-				0x00000000 /* EMC_ACT2PDEN */
-				0x00000007 /* EMC_AR2PDEN */
-				0x0000000f /* EMC_RW2PDEN */
-				0x00000008 /* EMC_TXSR */
-				0x00000008 /* EMC_TXSRDLL */
-				0x00000004 /* EMC_TCKE */
-				0x00000002 /* EMC_TFAW */
-				0x00000000 /* EMC_TRPAB */
-				0x00000004 /* EMC_TCLKSTABLE */
-				0x00000005 /* EMC_TCLKSTOP */
-				0x000000c7 /* EMC_TREFBW */
-				0x00000006 /* EMC_QUSE_EXTRA */
-				0x00000004 /* EMC_FBIO_CFG6 */
-				0x00000000 /* EMC_ODT_WRITE */
-				0x00000000 /* EMC_ODT_READ */
-				0x00004288 /* EMC_FBIO_CFG5 */
-				0x007800a4 /* EMC_CFG_DIG_DLL */
-				0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
-				0x000fc000 /* EMC_DLL_XFORM_DQS0 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS1 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS2 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS3 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS4 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS5 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS6 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS7 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE0 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE1 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE2 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE3 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE4 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE5 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE6 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE7 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
-				0x000fc000 /* EMC_DLL_XFORM_DQ0 */
-				0x000fc000 /* EMC_DLL_XFORM_DQ1 */
-				0x000fc000 /* EMC_DLL_XFORM_DQ2 */
-				0x000fc000 /* EMC_DLL_XFORM_DQ3 */
-				0x000002a0 /* EMC_XM2CMDPADCTRL */
-				0x0800211c /* EMC_XM2DQSPADCTRL2 */
-				0x00000000 /* EMC_XM2DQPADCTRL2 */
-				0x77fff884 /* EMC_XM2CLKPADCTRL */
-				0x01f1f108 /* EMC_XM2COMPPADCTRL */
-				0x05057404 /* EMC_XM2VTTGENPADCTRL */
-				0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
-				0x08000168 /* EMC_XM2QUSEPADCTRL */
-				0x08000000 /* EMC_XM2DQSPADCTRL3 */
-				0x00000802 /* EMC_CTT_TERM_CTRL */
-				0x00000000 /* EMC_ZCAL_INTERVAL */
-				0x00000040 /* EMC_ZCAL_WAIT_CNT */
-				0x000c000c /* EMC_MRS_WAIT_CNT */
-				0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
-				0x00000000 /* EMC_CTT */
-				0x00000000 /* EMC_CTT_DURATION */
-				0x80000287 /* EMC_DYN_SELF_REF_CONTROL */
-				0xe8000000 /* EMC_FBIO_SPARE */
-				0xff00ff00 /* EMC_CFG_RSV */
-			>;
-		};
-		timing-51000000 {
-			clock-frequency = <51000000>;
-			nvidia,emc-auto-cal-interval = <0x001fffff>;
-			nvidia,emc-mode-1 = <0x80100003>;
-			nvidia,emc-mode-2 = <0x80200008>;
-			nvidia,emc-mode-reset = <0x80001221>;
-			nvidia,emc-zcal-cnt-long = <0x00000040>;
-			nvidia,emc-cfg-periodic-qrst;
-			nvidia,emc-cfg-dyn-self-ref;
-			nvidia,emc-configuration = <
-				0x00000002 /* EMC_RC */
-				0x0000000f /* EMC_RFC */
-				0x00000001 /* EMC_RAS */
-				0x00000000 /* EMC_RP */
-				0x00000002 /* EMC_R2W */
-				0x0000000a /* EMC_W2R */
-				0x00000005 /* EMC_R2P */
-				0x0000000b /* EMC_W2P */
-				0x00000000 /* EMC_RD_RCD */
-				0x00000000 /* EMC_WR_RCD */
-				0x00000003 /* EMC_RRD */
-				0x00000001 /* EMC_REXT */
-				0x00000000 /* EMC_WEXT */
-				0x00000005 /* EMC_WDV */
-				0x00000005 /* EMC_QUSE */
-				0x00000004 /* EMC_QRST */
-				0x0000000a /* EMC_QSAFE */
-				0x0000000b /* EMC_RDV */
-				0x00000181 /* EMC_REFRESH */
-				0x00000000 /* EMC_BURST_REFRESH_NUM */
-				0x00000060 /* EMC_PRE_REFRESH_REQ_CNT */
-				0x00000002 /* EMC_PDEX2WR */
-				0x00000002 /* EMC_PDEX2RD */
-				0x00000001 /* EMC_PCHG2PDEN */
-				0x00000000 /* EMC_ACT2PDEN */
-				0x00000007 /* EMC_AR2PDEN */
-				0x0000000f /* EMC_RW2PDEN */
-				0x00000010 /* EMC_TXSR */
-				0x00000010 /* EMC_TXSRDLL */
-				0x00000004 /* EMC_TCKE */
-				0x00000003 /* EMC_TFAW */
-				0x00000000 /* EMC_TRPAB */
-				0x00000004 /* EMC_TCLKSTABLE */
-				0x00000005 /* EMC_TCLKSTOP */
-				0x0000018e /* EMC_TREFBW */
-				0x00000006 /* EMC_QUSE_EXTRA */
-				0x00000004 /* EMC_FBIO_CFG6 */
-				0x00000000 /* EMC_ODT_WRITE */
-				0x00000000 /* EMC_ODT_READ */
-				0x00004288 /* EMC_FBIO_CFG5 */
-				0x007800a4 /* EMC_CFG_DIG_DLL */
-				0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
-				0x000fc000 /* EMC_DLL_XFORM_DQS0 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS1 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS2 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS3 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS4 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS5 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS6 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS7 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE0 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE1 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE2 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE3 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE4 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE5 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE6 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE7 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
-				0x000fc000 /* EMC_DLL_XFORM_DQ0 */
-				0x000fc000 /* EMC_DLL_XFORM_DQ1 */
-				0x000fc000 /* EMC_DLL_XFORM_DQ2 */
-				0x000fc000 /* EMC_DLL_XFORM_DQ3 */
-				0x000002a0 /* EMC_XM2CMDPADCTRL */
-				0x0800211c /* EMC_XM2DQSPADCTRL2 */
-				0x00000000 /* EMC_XM2DQPADCTRL2 */
-				0x77fff884 /* EMC_XM2CLKPADCTRL */
-				0x01f1f108 /* EMC_XM2COMPPADCTRL */
-				0x05057404 /* EMC_XM2VTTGENPADCTRL */
-				0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
-				0x08000168 /* EMC_XM2QUSEPADCTRL */
-				0x08000000 /* EMC_XM2DQSPADCTRL3 */
-				0x00000802 /* EMC_CTT_TERM_CTRL */
-				0x00000000 /* EMC_ZCAL_INTERVAL */
-				0x00000040 /* EMC_ZCAL_WAIT_CNT */
-				0x000c000c /* EMC_MRS_WAIT_CNT */
-				0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
-				0x00000000 /* EMC_CTT */
-				0x00000000 /* EMC_CTT_DURATION */
-				0x8000040b /* EMC_DYN_SELF_REF_CONTROL */
-				0xe8000000 /* EMC_FBIO_SPARE */
-				0xff00ff00 /* EMC_CFG_RSV */
-			>;
-		};
-		timing-102000000 {
-			clock-frequency = <102000000>;
-			nvidia,emc-auto-cal-interval = <0x001fffff>;
-			nvidia,emc-mode-1 = <0x80100003>;
-			nvidia,emc-mode-2 = <0x80200008>;
-			nvidia,emc-mode-reset = <0x80001221>;
-			nvidia,emc-zcal-cnt-long = <0x00000040>;
-			nvidia,emc-cfg-periodic-qrst;
-			nvidia,emc-cfg-dyn-self-ref;
-			nvidia,emc-configuration = <
-				0x00000004 /* EMC_RC */
-				0x0000001e /* EMC_RFC */
-				0x00000003 /* EMC_RAS */
-				0x00000001 /* EMC_RP */
-				0x00000002 /* EMC_R2W */
-				0x0000000a /* EMC_W2R */
-				0x00000005 /* EMC_R2P */
-				0x0000000b /* EMC_W2P */
-				0x00000001 /* EMC_RD_RCD */
-				0x00000001 /* EMC_WR_RCD */
-				0x00000003 /* EMC_RRD */
-				0x00000001 /* EMC_REXT */
-				0x00000000 /* EMC_WEXT */
-				0x00000005 /* EMC_WDV */
-				0x00000005 /* EMC_QUSE */
-				0x00000004 /* EMC_QRST */
-				0x0000000a /* EMC_QSAFE */
-				0x0000000b /* EMC_RDV */
-				0x00000303 /* EMC_REFRESH */
-				0x00000000 /* EMC_BURST_REFRESH_NUM */
-				0x000000c0 /* EMC_PRE_REFRESH_REQ_CNT */
-				0x00000002 /* EMC_PDEX2WR */
-				0x00000002 /* EMC_PDEX2RD */
-				0x00000001 /* EMC_PCHG2PDEN */
-				0x00000000 /* EMC_ACT2PDEN */
-				0x00000007 /* EMC_AR2PDEN */
-				0x0000000f /* EMC_RW2PDEN */
-				0x00000020 /* EMC_TXSR */
-				0x00000020 /* EMC_TXSRDLL */
-				0x00000004 /* EMC_TCKE */
-				0x00000005 /* EMC_TFAW */
-				0x00000000 /* EMC_TRPAB */
-				0x00000004 /* EMC_TCLKSTABLE */
-				0x00000005 /* EMC_TCLKSTOP */
-				0x0000031c /* EMC_TREFBW */
-				0x00000006 /* EMC_QUSE_EXTRA */
-				0x00000004 /* EMC_FBIO_CFG6 */
-				0x00000000 /* EMC_ODT_WRITE */
-				0x00000000 /* EMC_ODT_READ */
-				0x00004288 /* EMC_FBIO_CFG5 */
-				0x007800a4 /* EMC_CFG_DIG_DLL */
-				0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
-				0x000fc000 /* EMC_DLL_XFORM_DQS0 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS1 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS2 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS3 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS4 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS5 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS6 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS7 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE0 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE1 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE2 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE3 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE4 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE5 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE6 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE7 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
-				0x000fc000 /* EMC_DLL_XFORM_DQ0 */
-				0x000fc000 /* EMC_DLL_XFORM_DQ1 */
-				0x000fc000 /* EMC_DLL_XFORM_DQ2 */
-				0x000fc000 /* EMC_DLL_XFORM_DQ3 */
-				0x000002a0 /* EMC_XM2CMDPADCTRL */
-				0x0800211c /* EMC_XM2DQSPADCTRL2 */
-				0x00000000 /* EMC_XM2DQPADCTRL2 */
-				0x77fff884 /* EMC_XM2CLKPADCTRL */
-				0x01f1f108 /* EMC_XM2COMPPADCTRL */
-				0x05057404 /* EMC_XM2VTTGENPADCTRL */
-				0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
-				0x08000168 /* EMC_XM2QUSEPADCTRL */
-				0x08000000 /* EMC_XM2DQSPADCTRL3 */
-				0x00000802 /* EMC_CTT_TERM_CTRL */
-				0x00000000 /* EMC_ZCAL_INTERVAL */
-				0x00000040 /* EMC_ZCAL_WAIT_CNT */
-				0x000c000c /* EMC_MRS_WAIT_CNT */
-				0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
-				0x00000000 /* EMC_CTT */
-				0x00000000 /* EMC_CTT_DURATION */
-				0x80000713 /* EMC_DYN_SELF_REF_CONTROL */
-				0xe8000000 /* EMC_FBIO_SPARE */
-				0xff00ff00 /* EMC_CFG_RSV */
-			>;
-		};
-		timing-204000000 {
-			clock-frequency = <204000000>;
-			nvidia,emc-auto-cal-interval = <0x001fffff>;
-			nvidia,emc-mode-1 = <0x80100003>;
-			nvidia,emc-mode-2 = <0x80200008>;
-			nvidia,emc-mode-reset = <0x80001221>;
-			nvidia,emc-zcal-cnt-long = <0x00000040>;
-			nvidia,emc-cfg-periodic-qrst;
-			nvidia,emc-cfg-dyn-self-ref;
-			nvidia,emc-configuration = <
-				0x00000009 /* EMC_RC */
-				0x0000003d /* EMC_RFC */
-				0x00000007 /* EMC_RAS */
-				0x00000002 /* EMC_RP */
-				0x00000002 /* EMC_R2W */
-				0x0000000a /* EMC_W2R */
-				0x00000005 /* EMC_R2P */
-				0x0000000b /* EMC_W2P */
-				0x00000002 /* EMC_RD_RCD */
-				0x00000002 /* EMC_WR_RCD */
-				0x00000003 /* EMC_RRD */
-				0x00000001 /* EMC_REXT */
-				0x00000000 /* EMC_WEXT */
-				0x00000005 /* EMC_WDV */
-				0x00000005 /* EMC_QUSE */
-				0x00000004 /* EMC_QRST */
-				0x0000000a /* EMC_QSAFE */
-				0x0000000b /* EMC_RDV */
-				0x00000607 /* EMC_REFRESH */
-				0x00000000 /* EMC_BURST_REFRESH_NUM */
-				0x00000181 /* EMC_PRE_REFRESH_REQ_CNT */
-				0x00000002 /* EMC_PDEX2WR */
-				0x00000002 /* EMC_PDEX2RD */
-				0x00000001 /* EMC_PCHG2PDEN */
-				0x00000000 /* EMC_ACT2PDEN */
-				0x00000007 /* EMC_AR2PDEN */
-				0x0000000f /* EMC_RW2PDEN */
-				0x00000040 /* EMC_TXSR */
-				0x00000040 /* EMC_TXSRDLL */
-				0x00000004 /* EMC_TCKE */
-				0x00000009 /* EMC_TFAW */
-				0x00000000 /* EMC_TRPAB */
-				0x00000004 /* EMC_TCLKSTABLE */
-				0x00000005 /* EMC_TCLKSTOP */
-				0x00000638 /* EMC_TREFBW */
-				0x00000006 /* EMC_QUSE_EXTRA */
-				0x00000006 /* EMC_FBIO_CFG6 */
-				0x00000000 /* EMC_ODT_WRITE */
-				0x00000000 /* EMC_ODT_READ */
-				0x00004288 /* EMC_FBIO_CFG5 */
-				0x004400a4 /* EMC_CFG_DIG_DLL */
-				0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
-				0x00080000 /* EMC_DLL_XFORM_DQS0 */
-				0x00080000 /* EMC_DLL_XFORM_DQS1 */
-				0x00080000 /* EMC_DLL_XFORM_DQS2 */
-				0x00080000 /* EMC_DLL_XFORM_DQS3 */
-				0x00080000 /* EMC_DLL_XFORM_DQS4 */
-				0x00080000 /* EMC_DLL_XFORM_DQS5 */
-				0x00080000 /* EMC_DLL_XFORM_DQS6 */
-				0x00080000 /* EMC_DLL_XFORM_DQS7 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE0 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE1 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE2 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE3 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE4 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE5 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE6 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE7 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
-				0x00080000 /* EMC_DLL_XFORM_DQ0 */
-				0x00080000 /* EMC_DLL_XFORM_DQ1 */
-				0x00080000 /* EMC_DLL_XFORM_DQ2 */
-				0x00080000 /* EMC_DLL_XFORM_DQ3 */
-				0x000002a0 /* EMC_XM2CMDPADCTRL */
-				0x0800211c /* EMC_XM2DQSPADCTRL2 */
-				0x00000000 /* EMC_XM2DQPADCTRL2 */
-				0x77fff884 /* EMC_XM2CLKPADCTRL */
-				0x01f1f108 /* EMC_XM2COMPPADCTRL */
-				0x05057404 /* EMC_XM2VTTGENPADCTRL */
-				0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
-				0x08000168 /* EMC_XM2QUSEPADCTRL */
-				0x08000000 /* EMC_XM2DQSPADCTRL3 */
-				0x00000802 /* EMC_CTT_TERM_CTRL */
-				0x00020000 /* EMC_ZCAL_INTERVAL */
-				0x00000100 /* EMC_ZCAL_WAIT_CNT */
-				0x000c000c /* EMC_MRS_WAIT_CNT */
-				0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
-				0x00000000 /* EMC_CTT */
-				0x00000000 /* EMC_CTT_DURATION */
-				0x80000d22 /* EMC_DYN_SELF_REF_CONTROL */
-				0xe8000000 /* EMC_FBIO_SPARE */
-				0xff00ff00 /* EMC_CFG_RSV */
-			>;
-		};
-		timing-400000000 {
-			clock-frequency = <400000000>;
-			nvidia,emc-auto-cal-interval = <0x001fffff>;
-			nvidia,emc-mode-1 = <0x80100002>;
-			nvidia,emc-mode-2 = <0x80200000>;
-			nvidia,emc-mode-reset = <0x80000521>;
-			nvidia,emc-zcal-cnt-long = <0x00000040>;
-			nvidia,emc-configuration = <
-				0x00000012 /* EMC_RC */
-				0x00000076 /* EMC_RFC */
-				0x0000000c /* EMC_RAS */
-				0x00000004 /* EMC_RP */
-				0x00000003 /* EMC_R2W */
-				0x00000008 /* EMC_W2R */
-				0x00000002 /* EMC_R2P */
-				0x0000000a /* EMC_W2P */
-				0x00000004 /* EMC_RD_RCD */
-				0x00000004 /* EMC_WR_RCD */
-				0x00000002 /* EMC_RRD */
-				0x00000001 /* EMC_REXT */
-				0x00000000 /* EMC_WEXT */
-				0x00000004 /* EMC_WDV */
-				0x00000006 /* EMC_QUSE */
-				0x00000004 /* EMC_QRST */
-				0x0000000a /* EMC_QSAFE */
-				0x0000000c /* EMC_RDV */
-				0x00000bf0 /* EMC_REFRESH */
-				0x00000000 /* EMC_BURST_REFRESH_NUM */
-				0x000002fc /* EMC_PRE_REFRESH_REQ_CNT */
-				0x00000001 /* EMC_PDEX2WR */
-				0x00000008 /* EMC_PDEX2RD */
-				0x00000001 /* EMC_PCHG2PDEN */
-				0x00000000 /* EMC_ACT2PDEN */
-				0x00000008 /* EMC_AR2PDEN */
-				0x0000000f /* EMC_RW2PDEN */
-				0x0000007c /* EMC_TXSR */
-				0x00000200 /* EMC_TXSRDLL */
-				0x00000004 /* EMC_TCKE */
-				0x00000010 /* EMC_TFAW */
-				0x00000000 /* EMC_TRPAB */
-				0x00000004 /* EMC_TCLKSTABLE */
-				0x00000005 /* EMC_TCLKSTOP */
-				0x00000c30 /* EMC_TREFBW */
-				0x00000000 /* EMC_QUSE_EXTRA */
-				0x00000004 /* EMC_FBIO_CFG6 */
-				0x00000000 /* EMC_ODT_WRITE */
-				0x00000000 /* EMC_ODT_READ */
-				0x00007088 /* EMC_FBIO_CFG5 */
-				0x001d0084 /* EMC_CFG_DIG_DLL */
-				0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
-				0x00044000 /* EMC_DLL_XFORM_DQS0 */
-				0x00044000 /* EMC_DLL_XFORM_DQS1 */
-				0x00044000 /* EMC_DLL_XFORM_DQS2 */
-				0x00044000 /* EMC_DLL_XFORM_DQS3 */
-				0x00044000 /* EMC_DLL_XFORM_DQS4 */
-				0x00044000 /* EMC_DLL_XFORM_DQS5 */
-				0x00044000 /* EMC_DLL_XFORM_DQS6 */
-				0x00044000 /* EMC_DLL_XFORM_DQS7 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE0 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE1 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE2 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE3 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE4 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE5 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE6 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE7 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
-				0x00058000 /* EMC_DLL_XFORM_DQ0 */
-				0x00058000 /* EMC_DLL_XFORM_DQ1 */
-				0x00058000 /* EMC_DLL_XFORM_DQ2 */
-				0x00058000 /* EMC_DLL_XFORM_DQ3 */
-				0x000002a0 /* EMC_XM2CMDPADCTRL */
-				0x0800013d /* EMC_XM2DQSPADCTRL2 */
-				0x00000000 /* EMC_XM2DQPADCTRL2 */
-				0x77fff884 /* EMC_XM2CLKPADCTRL */
-				0x01f1f508 /* EMC_XM2COMPPADCTRL */
-				0x05057404 /* EMC_XM2VTTGENPADCTRL */
-				0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
-				0x080001e8 /* EMC_XM2QUSEPADCTRL */
-				0x08000021 /* EMC_XM2DQSPADCTRL3 */
-				0x00000802 /* EMC_CTT_TERM_CTRL */
-				0x00020000 /* EMC_ZCAL_INTERVAL */
-				0x00000100 /* EMC_ZCAL_WAIT_CNT */
-				0x0148000c /* EMC_MRS_WAIT_CNT */
-				0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
-				0x00000000 /* EMC_CTT */
-				0x00000000 /* EMC_CTT_DURATION */
-				0x800018c8 /* EMC_DYN_SELF_REF_CONTROL */
-				0xe8000000 /* EMC_FBIO_SPARE */
-				0xff00ff89 /* EMC_CFG_RSV */
-			>;
-		};
-		timing-800000000 {
-			clock-frequency = <800000000>;
-			nvidia,emc-auto-cal-interval = <0x001fffff>;
-			nvidia,emc-mode-1 = <0x80100002>;
-			nvidia,emc-mode-2 = <0x80200018>;
-			nvidia,emc-mode-reset = <0x80000d71>;
-			nvidia,emc-zcal-cnt-long = <0x00000040>;
-			nvidia,emc-cfg-periodic-qrst;
-			nvidia,emc-configuration = <
-				0x00000025 /* EMC_RC */
-				0x000000ee /* EMC_RFC */
-				0x0000001a /* EMC_RAS */
-				0x00000009 /* EMC_RP */
-				0x00000005 /* EMC_R2W */
-				0x0000000d /* EMC_W2R */
-				0x00000004 /* EMC_R2P */
-				0x00000013 /* EMC_W2P */
-				0x00000009 /* EMC_RD_RCD */
-				0x00000009 /* EMC_WR_RCD */
-				0x00000003 /* EMC_RRD */
-				0x00000001 /* EMC_REXT */
-				0x00000000 /* EMC_WEXT */
-				0x00000007 /* EMC_WDV */
-				0x0000000a /* EMC_QUSE */
-				0x00000009 /* EMC_QRST */
-				0x0000000b /* EMC_QSAFE */
-				0x00000011 /* EMC_RDV */
-				0x00001820 /* EMC_REFRESH */
-				0x00000000 /* EMC_BURST_REFRESH_NUM */
-				0x00000608 /* EMC_PRE_REFRESH_REQ_CNT */
-				0x00000003 /* EMC_PDEX2WR */
-				0x00000012 /* EMC_PDEX2RD */
-				0x00000001 /* EMC_PCHG2PDEN */
-				0x00000000 /* EMC_ACT2PDEN */
-				0x0000000f /* EMC_AR2PDEN */
-				0x00000018 /* EMC_RW2PDEN */
-				0x000000f8 /* EMC_TXSR */
-				0x00000200 /* EMC_TXSRDLL */
-				0x00000005 /* EMC_TCKE */
-				0x00000020 /* EMC_TFAW */
-				0x00000000 /* EMC_TRPAB */
-				0x00000007 /* EMC_TCLKSTABLE */
-				0x00000008 /* EMC_TCLKSTOP */
-				0x00001860 /* EMC_TREFBW */
-				0x0000000b /* EMC_QUSE_EXTRA */
-				0x00000006 /* EMC_FBIO_CFG6 */
-				0x00000000 /* EMC_ODT_WRITE */
-				0x00000000 /* EMC_ODT_READ */
-				0x00005088 /* EMC_FBIO_CFG5 */
-				0xf0070191 /* EMC_CFG_DIG_DLL */
-				0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
-				0x0000000c /* EMC_DLL_XFORM_DQS0 */
-				0x007fc00a /* EMC_DLL_XFORM_DQS1 */
-				0x00000008 /* EMC_DLL_XFORM_DQS2 */
-				0x0000000a /* EMC_DLL_XFORM_DQS3 */
-				0x0000000a /* EMC_DLL_XFORM_DQS4 */
-				0x0000000a /* EMC_DLL_XFORM_DQS5 */
-				0x0000000a /* EMC_DLL_XFORM_DQS6 */
-				0x0000000a /* EMC_DLL_XFORM_DQS7 */
-				0x00018000 /* EMC_DLL_XFORM_QUSE0 */
-				0x00018000 /* EMC_DLL_XFORM_QUSE1 */
-				0x00018000 /* EMC_DLL_XFORM_QUSE2 */
-				0x00018000 /* EMC_DLL_XFORM_QUSE3 */
-				0x00018000 /* EMC_DLL_XFORM_QUSE4 */
-				0x00018000 /* EMC_DLL_XFORM_QUSE5 */
-				0x00018000 /* EMC_DLL_XFORM_QUSE6 */
-				0x00018000 /* EMC_DLL_XFORM_QUSE7 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
-				0x0000000a /* EMC_DLL_XFORM_DQ0 */
-				0x0000000c /* EMC_DLL_XFORM_DQ1 */
-				0x0000000a /* EMC_DLL_XFORM_DQ2 */
-				0x0000000a /* EMC_DLL_XFORM_DQ3 */
-				0x000002a0 /* EMC_XM2CMDPADCTRL */
-				0x0600013d /* EMC_XM2DQSPADCTRL2 */
-				0x22220000 /* EMC_XM2DQPADCTRL2 */
-				0x77fff884 /* EMC_XM2CLKPADCTRL */
-				0x01f1f501 /* EMC_XM2COMPPADCTRL */
-				0x07077404 /* EMC_XM2VTTGENPADCTRL */
-				0x54000000 /* EMC_XM2VTTGENPADCTRL2 */
-				0x080001e8 /* EMC_XM2QUSEPADCTRL */
-				0x0a000021 /* EMC_XM2DQSPADCTRL3 */
-				0x00000802 /* EMC_CTT_TERM_CTRL */
-				0x00020000 /* EMC_ZCAL_INTERVAL */
-				0x00000100 /* EMC_ZCAL_WAIT_CNT */
-				0x00d0000c /* EMC_MRS_WAIT_CNT */
-				0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
-				0x00000000 /* EMC_CTT */
-				0x00000000 /* EMC_CTT_DURATION */
-				0x8000308c /* EMC_DYN_SELF_REF_CONTROL */
-				0xe8000000 /* EMC_FBIO_SPARE */
-				0xff00ff49 /* EMC_CFG_RSV */
-			>;
-		};
-	};
-};
-&state_default {
-	clk_32k_out_pa0 {
-		nvidia,pins = "clk_32k_out_pa0";
-		nvidia,function = "blink";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	uart3_cts_n_pa1 {
-		nvidia,pins = "uart3_cts_n_pa1";
-		nvidia,function = "uartc";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	dap2_fs_pa2 {
-		nvidia,pins = "dap2_fs_pa2";
-		nvidia,function = "i2s1";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	dap2_sclk_pa3 {
-		nvidia,pins = "dap2_sclk_pa3";
-		nvidia,function = "i2s1";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	dap2_din_pa4 {
-		nvidia,pins = "dap2_din_pa4";
-		nvidia,function = "i2s1";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	dap2_dout_pa5 {
-		nvidia,pins = "dap2_dout_pa5";
-		nvidia,function = "i2s1";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	sdmmc3_clk_pa6 {
-		nvidia,pins = "sdmmc3_clk_pa6";
-		nvidia,function = "sdmmc3";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	sdmmc3_cmd_pa7 {
-		nvidia,pins = "sdmmc3_cmd_pa7";
-		nvidia,function = "sdmmc3";
-		nvidia,pull = <TEGRA_PIN_PULL_UP>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	gmi_a17_pb0 {
-		nvidia,pins = "gmi_a17_pb0";
-		nvidia,function = "spi4";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	gmi_a18_pb1 {
-		nvidia,pins = "gmi_a18_pb1";
-		nvidia,function = "spi4";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	lcd_pwr0_pb2 {
-		nvidia,pins = "lcd_pwr0_pb2";
-		nvidia,function = "displaya";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	lcd_pclk_pb3 {
-		nvidia,pins = "lcd_pclk_pb3";
-		nvidia,function = "displaya";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	sdmmc3_dat3_pb4 {
-		nvidia,pins = "sdmmc3_dat3_pb4";
-		nvidia,function = "sdmmc3";
-		nvidia,pull = <TEGRA_PIN_PULL_UP>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	sdmmc3_dat2_pb5 {
-		nvidia,pins = "sdmmc3_dat2_pb5";
-		nvidia,function = "sdmmc3";
-		nvidia,pull = <TEGRA_PIN_PULL_UP>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	sdmmc3_dat1_pb6 {
-		nvidia,pins = "sdmmc3_dat1_pb6";
-		nvidia,function = "sdmmc3";
-		nvidia,pull = <TEGRA_PIN_PULL_UP>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	sdmmc3_dat0_pb7 {
-		nvidia,pins = "sdmmc3_dat0_pb7";
-		nvidia,function = "sdmmc3";
-		nvidia,pull = <TEGRA_PIN_PULL_UP>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	uart3_rts_n_pc0 {
-		nvidia,pins = "uart3_rts_n_pc0";
-		nvidia,function = "uartc";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	lcd_pwr1_pc1 {
-		nvidia,pins = "lcd_pwr1_pc1";
-		nvidia,function = "displaya";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	uart2_txd_pc2 {
-		nvidia,pins = "uart2_txd_pc2";
-		nvidia,function = "uartb";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	uart2_rxd_pc3 {
-		nvidia,pins = "uart2_rxd_pc3";
-		nvidia,function = "uartb";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	gen1_i2c_scl_pc4 {
-		nvidia,pins = "gen1_i2c_scl_pc4";
-		nvidia,function = "i2c1";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-		nvidia,open-drain = <TEGRA_PIN_DISABLE>;
-	};
-	gen1_i2c_sda_pc5 {
-		nvidia,pins = "gen1_i2c_sda_pc5";
-		nvidia,function = "i2c1";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-		nvidia,open-drain = <TEGRA_PIN_DISABLE>;
-	};
-	lcd_pwr2_pc6 {
-		nvidia,pins = "lcd_pwr2_pc6";
-		nvidia,function = "displaya";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	gmi_wp_n_pc7 {
-		nvidia,pins = "gmi_wp_n_pc7";
-		nvidia,function = "gmi";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	sdmmc3_dat5_pd0 {
-		nvidia,pins = "sdmmc3_dat5_pd0";
-		nvidia,function = "sdmmc3";
-		nvidia,pull = <TEGRA_PIN_PULL_UP>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	sdmmc3_dat4_pd1 {
-		nvidia,pins = "sdmmc3_dat4_pd1";
-		nvidia,function = "sdmmc3";
-		nvidia,pull = <TEGRA_PIN_PULL_UP>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	lcd_dc1_pd2 {
-		nvidia,pins = "lcd_dc1_pd2";
-		nvidia,function = "displaya";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	sdmmc3_dat6_pd3 {
-		nvidia,pins = "sdmmc3_dat6_pd3";
-		nvidia,function = "spi4";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	sdmmc3_dat7_pd4 {
-		nvidia,pins = "sdmmc3_dat7_pd4";
-		nvidia,function = "spi4";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	vi_d1_pd5 {
-		nvidia,pins = "vi_d1_pd5";
-		nvidia,function = "sdmmc2";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	vi_vsync_pd6 {
-		nvidia,pins = "vi_vsync_pd6";
-		nvidia,function = "ddr";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	vi_hsync_pd7 {
-		nvidia,pins = "vi_hsync_pd7";
-		nvidia,function = "ddr";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	lcd_d0_pe0 {
-		nvidia,pins = "lcd_d0_pe0";
-		nvidia,function = "displaya";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	lcd_d1_pe1 {
-		nvidia,pins = "lcd_d1_pe1";
-		nvidia,function = "displaya";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	lcd_d2_pe2 {
-		nvidia,pins = "lcd_d2_pe2";
-		nvidia,function = "displaya";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	lcd_d3_pe3 {
-		nvidia,pins = "lcd_d3_pe3";
-		nvidia,function = "displaya";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	lcd_d4_pe4 {
-		nvidia,pins = "lcd_d4_pe4";
-		nvidia,function = "displaya";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	lcd_d5_pe5 {
-		nvidia,pins = "lcd_d5_pe5";
-		nvidia,function = "displaya";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	lcd_d6_pe6 {
-		nvidia,pins = "lcd_d6_pe6";
-		nvidia,function = "displaya";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	lcd_d7_pe7 {
-		nvidia,pins = "lcd_d7_pe7";
-		nvidia,function = "displaya";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	lcd_d8_pf0 {
-		nvidia,pins = "lcd_d8_pf0";
-		nvidia,function = "displaya";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	lcd_d9_pf1 {
-		nvidia,pins = "lcd_d9_pf1";
-		nvidia,function = "displaya";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	lcd_d10_pf2 {
-		nvidia,pins = "lcd_d10_pf2";
-		nvidia,function = "displaya";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	lcd_d11_pf3 {
-		nvidia,pins = "lcd_d11_pf3";
-		nvidia,function = "displaya";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	lcd_d12_pf4 {
-		nvidia,pins = "lcd_d12_pf4";
-		nvidia,function = "displaya";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	lcd_d13_pf5 {
-		nvidia,pins = "lcd_d13_pf5";
-		nvidia,function = "displaya";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	lcd_d14_pf6 {
-		nvidia,pins = "lcd_d14_pf6";
-		nvidia,function = "displaya";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	lcd_d15_pf7 {
-		nvidia,pins = "lcd_d15_pf7";
-		nvidia,function = "displaya";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	gmi_ad0_pg0 {
-		nvidia,pins = "gmi_ad0_pg0";
-		nvidia,function = "nand";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	gmi_ad1_pg1 {
-		nvidia,pins = "gmi_ad1_pg1";
-		nvidia,function = "nand";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	gmi_ad2_pg2 {
-		nvidia,pins = "gmi_ad2_pg2";
-		nvidia,function = "nand";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	gmi_ad3_pg3 {
-		nvidia,pins = "gmi_ad3_pg3";
-		nvidia,function = "nand";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	gmi_ad4_pg4 {
-		nvidia,pins = "gmi_ad4_pg4";
-		nvidia,function = "nand";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	gmi_ad5_pg5 {
-		nvidia,pins = "gmi_ad5_pg5";
-		nvidia,function = "nand";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	gmi_ad6_pg6 {
-		nvidia,pins = "gmi_ad6_pg6";
-		nvidia,function = "nand";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	gmi_ad7_pg7 {
-		nvidia,pins = "gmi_ad7_pg7";
-		nvidia,function = "nand";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	gmi_ad8_ph0 {
-		nvidia,pins = "gmi_ad8_ph0";
-		nvidia,function = "pwm0";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	gmi_ad9_ph1 {
-		nvidia,pins = "gmi_ad9_ph1";
-		nvidia,function = "pwm1";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	gmi_ad10_ph2 {
-		nvidia,pins = "gmi_ad10_ph2";
-		nvidia,function = "pwm2";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	gmi_ad11_ph3 {
-		nvidia,pins = "gmi_ad11_ph3";
-		nvidia,function = "nand";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	gmi_ad12_ph4 {
-		nvidia,pins = "gmi_ad12_ph4";
-		nvidia,function = "nand";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	gmi_ad13_ph5 {
-		nvidia,pins = "gmi_ad13_ph5";
-		nvidia,function = "nand";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	gmi_ad14_ph6 {
-		nvidia,pins = "gmi_ad14_ph6";
-		nvidia,function = "nand";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	gmi_wr_n_pi0 {
-		nvidia,pins = "gmi_wr_n_pi0";
-		nvidia,function = "nand";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	gmi_oe_n_pi1 {
-		nvidia,pins = "gmi_oe_n_pi1";
-		nvidia,function = "nand";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	gmi_dqs_pi2 {
-		nvidia,pins = "gmi_dqs_pi2";
-		nvidia,function = "nand";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	gmi_iordy_pi5 {
-		nvidia,pins = "gmi_iordy_pi5";
-		nvidia,function = "rsvd1";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	gmi_cs7_n_pi6 {
-		nvidia,pins = "gmi_cs7_n_pi6";
-		nvidia,function = "nand";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	gmi_wait_pi7 {
-		nvidia,pins = "gmi_wait_pi7";
-		nvidia,function = "nand";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	lcd_de_pj1 {
-		nvidia,pins = "lcd_de_pj1";
-		nvidia,function = "displaya";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	gmi_cs1_n_pj2 {
-		nvidia,pins = "gmi_cs1_n_pj2";
-		nvidia,function = "rsvd1";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	lcd_hsync_pj3 {
-		nvidia,pins = "lcd_hsync_pj3";
-		nvidia,function = "displaya";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	lcd_vsync_pj4 {
-		nvidia,pins = "lcd_vsync_pj4";
-		nvidia,function = "displaya";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	uart2_cts_n_pj5 {
-		nvidia,pins = "uart2_cts_n_pj5";
-		nvidia,function = "uartb";
-		nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	uart2_rts_n_pj6 {
-		nvidia,pins = "uart2_rts_n_pj6";
-		nvidia,function = "uartb";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	gmi_a16_pj7 {
-		nvidia,pins = "gmi_a16_pj7";
-		nvidia,function = "spi4";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	gmi_adv_n_pk0 {
-		nvidia,pins = "gmi_adv_n_pk0";
-		nvidia,function = "nand";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	gmi_clk_pk1 {
-		nvidia,pins = "gmi_clk_pk1";
-		nvidia,function = "nand";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	gmi_cs2_n_pk3 {
-		nvidia,pins = "gmi_cs2_n_pk3";
-		nvidia,function = "rsvd1";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	gmi_cs3_n_pk4 {
-		nvidia,pins = "gmi_cs3_n_pk4";
-		nvidia,function = "nand";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	spdif_out_pk5 {
-		nvidia,pins = "spdif_out_pk5";
-		nvidia,function = "spdif";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	spdif_in_pk6 {
-		nvidia,pins = "spdif_in_pk6";
-		nvidia,function = "spdif";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	gmi_a19_pk7 {
-		nvidia,pins = "gmi_a19_pk7";
-		nvidia,function = "spi4";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	vi_d2_pl0 {
-		nvidia,pins = "vi_d2_pl0";
-		nvidia,function = "sdmmc2";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	vi_d3_pl1 {
-		nvidia,pins = "vi_d3_pl1";
-		nvidia,function = "sdmmc2";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	vi_d4_pl2 {
-		nvidia,pins = "vi_d4_pl2";
-		nvidia,function = "vi";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	vi_d5_pl3 {
-		nvidia,pins = "vi_d5_pl3";
-		nvidia,function = "sdmmc2";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	vi_d6_pl4 {
-		nvidia,pins = "vi_d6_pl4";
-		nvidia,function = "vi";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	vi_d7_pl5 {
-		nvidia,pins = "vi_d7_pl5";
-		nvidia,function = "sdmmc2";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	vi_d8_pl6 {
-		nvidia,pins = "vi_d8_pl6";
-		nvidia,function = "sdmmc2";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	vi_d9_pl7 {
-		nvidia,pins = "vi_d9_pl7";
-		nvidia,function = "sdmmc2";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	lcd_d16_pm0 {
-		nvidia,pins = "lcd_d16_pm0";
-		nvidia,function = "displaya";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	lcd_d17_pm1 {
-		nvidia,pins = "lcd_d17_pm1";
-		nvidia,function = "displaya";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	lcd_d18_pm2 {
-		nvidia,pins = "lcd_d18_pm2";
-		nvidia,function = "displaya";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	lcd_d19_pm3 {
-		nvidia,pins = "lcd_d19_pm3";
-		nvidia,function = "displaya";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	lcd_d20_pm4 {
-		nvidia,pins = "lcd_d20_pm4";
-		nvidia,function = "displaya";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	lcd_d21_pm5 {
-		nvidia,pins = "lcd_d21_pm5";
-		nvidia,function = "displaya";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	lcd_d22_pm6 {
-		nvidia,pins = "lcd_d22_pm6";
-		nvidia,function = "displaya";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	lcd_d23_pm7 {
-		nvidia,pins = "lcd_d23_pm7";
-		nvidia,function = "displaya";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	dap1_fs_pn0 {
-		nvidia,pins = "dap1_fs_pn0";
-		nvidia,function = "i2s0";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	dap1_din_pn1 {
-		nvidia,pins = "dap1_din_pn1";
-		nvidia,function = "i2s0";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	dap1_dout_pn2 {
-		nvidia,pins = "dap1_dout_pn2";
-		nvidia,function = "i2s0";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	dap1_sclk_pn3 {
-		nvidia,pins = "dap1_sclk_pn3";
-		nvidia,function = "i2s0";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	lcd_cs0_n_pn4 {
-		nvidia,pins = "lcd_cs0_n_pn4";
-		nvidia,function = "displaya";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	lcd_sdout_pn5 {
-		nvidia,pins = "lcd_sdout_pn5";
-		nvidia,function = "displaya";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	lcd_dc0_pn6 {
-		nvidia,pins = "lcd_dc0_pn6";
-		nvidia,function = "displaya";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	hdmi_int_pn7 {
-		nvidia,pins = "hdmi_int_pn7";
-		nvidia,function = "hdmi";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	ulpi_data7_po0 {
-		nvidia,pins = "ulpi_data7_po0";
-		nvidia,function = "uarta";
-		nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	ulpi_data0_po1 {
-		nvidia,pins = "ulpi_data0_po1";
-		nvidia,function = "uarta";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	ulpi_data1_po2 {
-		nvidia,pins = "ulpi_data1_po2";
-		nvidia,function = "uarta";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	ulpi_data2_po3 {
-		nvidia,pins = "ulpi_data2_po3";
-		nvidia,function = "uarta";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	ulpi_data3_po4 {
-		nvidia,pins = "ulpi_data3_po4";
-		nvidia,function = "uarta";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	ulpi_data4_po5 {
-		nvidia,pins = "ulpi_data4_po5";
-		nvidia,function = "uarta";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	ulpi_data5_po6 {
-		nvidia,pins = "ulpi_data5_po6";
-		nvidia,function = "uarta";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	ulpi_data6_po7 {
-		nvidia,pins = "ulpi_data6_po7";
-		nvidia,function = "uarta";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	dap3_fs_pp0 {
-		nvidia,pins = "dap3_fs_pp0";
-		nvidia,function = "i2s2";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	dap3_din_pp1 {
-		nvidia,pins = "dap3_din_pp1";
-		nvidia,function = "i2s2";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	dap3_dout_pp2 {
-		nvidia,pins = "dap3_dout_pp2";
-		nvidia,function = "i2s2";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	dap3_sclk_pp3 {
-		nvidia,pins = "dap3_sclk_pp3";
-		nvidia,function = "i2s2";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	dap4_fs_pp4 {
-		nvidia,pins = "dap4_fs_pp4";
-		nvidia,function = "i2s3";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	dap4_din_pp5 {
-		nvidia,pins = "dap4_din_pp5";
-		nvidia,function = "i2s3";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	dap4_dout_pp6 {
-		nvidia,pins = "dap4_dout_pp6";
-		nvidia,function = "i2s3";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	dap4_sclk_pp7 {
-		nvidia,pins = "dap4_sclk_pp7";
-		nvidia,function = "i2s3";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	kb_col0_pq0 {
-		nvidia,pins = "kb_col0_pq0";
-		nvidia,function = "kbc";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	kb_col1_pq1 {
-		nvidia,pins = "kb_col1_pq1";
-		nvidia,function = "kbc";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	kb_col2_pq2 {
-		nvidia,pins = "kb_col2_pq2";
-		nvidia,function = "kbc";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	kb_col3_pq3 {
-		nvidia,pins = "kb_col3_pq3";
-		nvidia,function = "kbc";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	kb_col4_pq4 {
-		nvidia,pins = "kb_col4_pq4";
-		nvidia,function = "kbc";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	kb_col5_pq5 {
-		nvidia,pins = "kb_col5_pq5";
-		nvidia,function = "kbc";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	kb_col6_pq6 {
-		nvidia,pins = "kb_col6_pq6";
-		nvidia,function = "kbc";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	kb_col7_pq7 {
-		nvidia,pins = "kb_col7_pq7";
-		nvidia,function = "kbc";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	kb_row0_pr0 {
-		nvidia,pins = "kb_row0_pr0";
-		nvidia,function = "kbc";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	kb_row1_pr1 {
-		nvidia,pins = "kb_row1_pr1";
-		nvidia,function = "kbc";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	kb_row2_pr2 {
-		nvidia,pins = "kb_row2_pr2";
-		nvidia,function = "kbc";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	kb_row3_pr3 {
-		nvidia,pins = "kb_row3_pr3";
-		nvidia,function = "kbc";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	kb_row4_pr4 {
-		nvidia,pins = "kb_row4_pr4";
-		nvidia,function = "kbc";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	kb_row5_pr5 {
-		nvidia,pins = "kb_row5_pr5";
-		nvidia,function = "kbc";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	kb_row6_pr6 {
-		nvidia,pins = "kb_row6_pr6";
-		nvidia,function = "kbc";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	kb_row7_pr7 {
-		nvidia,pins = "kb_row7_pr7";
-		nvidia,function = "kbc";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	kb_row8_ps0 {
-		nvidia,pins = "kb_row8_ps0";
-		nvidia,function = "kbc";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	kb_row9_ps1 {
-		nvidia,pins = "kb_row9_ps1";
-		nvidia,function = "kbc";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	kb_row10_ps2 {
-		nvidia,pins = "kb_row10_ps2";
-		nvidia,function = "kbc";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	kb_row11_ps3 {
-		nvidia,pins = "kb_row11_ps3";
-		nvidia,function = "kbc";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	kb_row12_ps4 {
-		nvidia,pins = "kb_row12_ps4";
-		nvidia,function = "kbc";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	kb_row13_ps5 {
-		nvidia,pins = "kb_row13_ps5";
-		nvidia,function = "kbc";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	kb_row14_ps6 {
-		nvidia,pins = "kb_row14_ps6";
-		nvidia,function = "kbc";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	kb_row15_ps7 {
-		nvidia,pins = "kb_row15_ps7";
-		nvidia,function = "kbc";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	vi_pclk_pt0 {
-		nvidia,pins = "vi_pclk_pt0";
-		nvidia,function = "rsvd1";
-		nvidia,pull = <TEGRA_PIN_PULL_UP>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	vi_mclk_pt1 {
-		nvidia,pins = "vi_mclk_pt1";
-		nvidia,function = "vi";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	vi_d10_pt2 {
-		nvidia,pins = "vi_d10_pt2";
-		nvidia,function = "ddr";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	vi_d11_pt3 {
-		nvidia,pins = "vi_d11_pt3";
-		nvidia,function = "ddr";
-		nvidia,pull = <TEGRA_PIN_PULL_UP>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	vi_d0_pt4 {
-		nvidia,pins = "vi_d0_pt4";
-		nvidia,function = "ddr";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	gen2_i2c_scl_pt5 {
-		nvidia,pins = "gen2_i2c_scl_pt5";
-		nvidia,function = "i2c2";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-		nvidia,open-drain = <TEGRA_PIN_DISABLE>;
-	};
-	gen2_i2c_sda_pt6 {
-		nvidia,pins = "gen2_i2c_sda_pt6";
-		nvidia,function = "i2c2";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-		nvidia,open-drain = <TEGRA_PIN_DISABLE>;
-	};
-	sdmmc4_cmd_pt7 {
-		nvidia,pins = "sdmmc4_cmd_pt7";
-		nvidia,function = "sdmmc4";
-		nvidia,pull = <TEGRA_PIN_PULL_UP>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-		nvidia,io-reset = <TEGRA_PIN_DISABLE>;
-	};
-	pu0 {
-		nvidia,pins = "pu0";
-		nvidia,function = "owr";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	pu1 {
-		nvidia,pins = "pu1";
-		nvidia,function = "rsvd1";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	pu2 {
-		nvidia,pins = "pu2";
-		nvidia,function = "rsvd1";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	pu3 {
-		nvidia,pins = "pu3";
-		nvidia,function = "pwm0";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	pu4 {
-		nvidia,pins = "pu4";
-		nvidia,function = "pwm1";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	pu5 {
-		nvidia,pins = "pu5";
-		nvidia,function = "rsvd4";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	pu6 {
-		nvidia,pins = "pu6";
-		nvidia,function = "pwm3";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	jtag_rtck_pu7 {
-		nvidia,pins = "jtag_rtck_pu7";
-		nvidia,function = "rtck";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	pv0 {
-		nvidia,pins = "pv0";
-		nvidia,function = "rsvd1";
-		nvidia,pull = <TEGRA_PIN_PULL_UP>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	pv1 {
-		nvidia,pins = "pv1";
-		nvidia,function = "rsvd1";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	pv2 {
-		nvidia,pins = "pv2";
-		nvidia,function = "owr";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	pv3 {
-		nvidia,pins = "pv3";
-		nvidia,function = "clk_12m_out";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	ddc_scl_pv4 {
-		nvidia,pins = "ddc_scl_pv4";
-		nvidia,function = "i2c4";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	ddc_sda_pv5 {
-		nvidia,pins = "ddc_sda_pv5";
-		nvidia,function = "i2c4";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	crt_hsync_pv6 {
-		nvidia,pins = "crt_hsync_pv6";
-		nvidia,function = "crt";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	crt_vsync_pv7 {
-		nvidia,pins = "crt_vsync_pv7";
-		nvidia,function = "crt";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	lcd_cs1_n_pw0 {
-		nvidia,pins = "lcd_cs1_n_pw0";
-		nvidia,function = "displaya";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	lcd_m1_pw1 {
-		nvidia,pins = "lcd_m1_pw1";
-		nvidia,function = "displaya";
-		nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	spi2_cs1_n_pw2 {
-		nvidia,pins = "spi2_cs1_n_pw2";
-		nvidia,function = "spi2";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	clk1_out_pw4 {
-		nvidia,pins = "clk1_out_pw4";
-		nvidia,function = "extperiph1";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	clk2_out_pw5 {
-		nvidia,pins = "clk2_out_pw5";
-		nvidia,function = "extperiph2";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	uart3_txd_pw6 {
-		nvidia,pins = "uart3_txd_pw6";
-		nvidia,function = "uartc";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	uart3_rxd_pw7 {
-		nvidia,pins = "uart3_rxd_pw7";
-		nvidia,function = "uartc";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	spi2_sck_px2 {
-		nvidia,pins = "spi2_sck_px2";
-		nvidia,function = "gmi";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	spi1_mosi_px4 {
-		nvidia,pins = "spi1_mosi_px4";
-		nvidia,function = "spi1";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	spi1_sck_px5 {
-		nvidia,pins = "spi1_sck_px5";
-		nvidia,function = "spi1";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	spi1_cs0_n_px6 {
-		nvidia,pins = "spi1_cs0_n_px6";
-		nvidia,function = "spi1";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	spi1_miso_px7 {
-		nvidia,pins = "spi1_miso_px7";
-		nvidia,function = "spi1";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	ulpi_clk_py0 {
-		nvidia,pins = "ulpi_clk_py0";
-		nvidia,function = "uartd";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	ulpi_dir_py1 {
-		nvidia,pins = "ulpi_dir_py1";
-		nvidia,function = "uartd";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	ulpi_nxt_py2 {
-		nvidia,pins = "ulpi_nxt_py2";
-		nvidia,function = "uartd";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	ulpi_stp_py3 {
-		nvidia,pins = "ulpi_stp_py3";
-		nvidia,function = "uartd";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	sdmmc1_dat3_py4 {
-		nvidia,pins = "sdmmc1_dat3_py4";
-		nvidia,function = "sdmmc1";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	sdmmc1_dat2_py5 {
-		nvidia,pins = "sdmmc1_dat2_py5";
-		nvidia,function = "sdmmc1";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	sdmmc1_dat1_py6 {
-		nvidia,pins = "sdmmc1_dat1_py6";
-		nvidia,function = "sdmmc1";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	sdmmc1_dat0_py7 {
-		nvidia,pins = "sdmmc1_dat0_py7";
-		nvidia,function = "sdmmc1";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	sdmmc1_clk_pz0 {
-		nvidia,pins = "sdmmc1_clk_pz0";
-		nvidia,function = "sdmmc1";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	sdmmc1_cmd_pz1 {
-		nvidia,pins = "sdmmc1_cmd_pz1";
-		nvidia,function = "sdmmc1";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	lcd_sdin_pz2 {
-		nvidia,pins = "lcd_sdin_pz2";
-		nvidia,function = "displaya";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	lcd_wr_n_pz3 {
-		nvidia,pins = "lcd_wr_n_pz3";
-		nvidia,function = "displaya";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	lcd_sck_pz4 {
-		nvidia,pins = "lcd_sck_pz4";
-		nvidia,function = "displaya";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	sys_clk_req_pz5 {
-		nvidia,pins = "sys_clk_req_pz5";
-		nvidia,function = "sysclk";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	pwr_i2c_scl_pz6 {
-		nvidia,pins = "pwr_i2c_scl_pz6";
-		nvidia,function = "i2cpwr";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-		nvidia,open-drain = <TEGRA_PIN_ENABLE>;
-	};
-	pwr_i2c_sda_pz7 {
-		nvidia,pins = "pwr_i2c_sda_pz7";
-		nvidia,function = "i2cpwr";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-		nvidia,open-drain = <TEGRA_PIN_ENABLE>;
-	};
-	sdmmc4_dat0_paa0 {
-		nvidia,pins = "sdmmc4_dat0_paa0";
-		nvidia,function = "sdmmc4";
-		nvidia,pull = <TEGRA_PIN_PULL_UP>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-		nvidia,io-reset = <TEGRA_PIN_DISABLE>;
-	};
-	sdmmc4_dat1_paa1 {
-		nvidia,pins = "sdmmc4_dat1_paa1";
-		nvidia,function = "sdmmc4";
-		nvidia,pull = <TEGRA_PIN_PULL_UP>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-		nvidia,io-reset = <TEGRA_PIN_DISABLE>;
-	};
-	sdmmc4_dat2_paa2 {
-		nvidia,pins = "sdmmc4_dat2_paa2";
-		nvidia,function = "sdmmc4";
-		nvidia,pull = <TEGRA_PIN_PULL_UP>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-		nvidia,io-reset = <TEGRA_PIN_DISABLE>;
-	};
-	sdmmc4_dat3_paa3 {
-		nvidia,pins = "sdmmc4_dat3_paa3";
-		nvidia,function = "sdmmc4";
-		nvidia,pull = <TEGRA_PIN_PULL_UP>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-		nvidia,io-reset = <TEGRA_PIN_DISABLE>;
-	};
-	sdmmc4_dat4_paa4 {
-		nvidia,pins = "sdmmc4_dat4_paa4";
-		nvidia,function = "sdmmc4";
-		nvidia,pull = <TEGRA_PIN_PULL_UP>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-		nvidia,io-reset = <TEGRA_PIN_DISABLE>;
-	};
-	sdmmc4_dat5_paa5 {
-		nvidia,pins = "sdmmc4_dat5_paa5";
-		nvidia,function = "sdmmc4";
-		nvidia,pull = <TEGRA_PIN_PULL_UP>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-		nvidia,io-reset = <TEGRA_PIN_DISABLE>;
-	};
-	sdmmc4_dat6_paa6 {
-		nvidia,pins = "sdmmc4_dat6_paa6";
-		nvidia,function = "sdmmc4";
-		nvidia,pull = <TEGRA_PIN_PULL_UP>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-		nvidia,io-reset = <TEGRA_PIN_DISABLE>;
-	};
-	sdmmc4_dat7_paa7 {
-		nvidia,pins = "sdmmc4_dat7_paa7";
-		nvidia,function = "sdmmc4";
-		nvidia,pull = <TEGRA_PIN_PULL_UP>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-		nvidia,io-reset = <TEGRA_PIN_DISABLE>;
-	};
-	pbb0 {
-		nvidia,pins = "pbb0";
-		nvidia,function = "i2s4";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	cam_i2c_scl_pbb1 {
-		nvidia,pins = "cam_i2c_scl_pbb1";
-		nvidia,function = "i2c3";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-		nvidia,open-drain = <TEGRA_PIN_DISABLE>;
-	};
-	cam_i2c_sda_pbb2 {
-		nvidia,pins = "cam_i2c_sda_pbb2";
-		nvidia,function = "i2c3";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-		nvidia,open-drain = <TEGRA_PIN_DISABLE>;
-	};
-	pbb3 {
-		nvidia,pins = "pbb3";
-		nvidia,function = "vgp3";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	pbb4 {
-		nvidia,pins = "pbb4";
-		nvidia,function = "vgp4";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	pbb5 {
-		nvidia,pins = "pbb5";
-		nvidia,function = "vgp5";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	pbb6 {
-		nvidia,pins = "pbb6";
-		nvidia,function = "vgp6";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	pbb7 {
-		nvidia,pins = "pbb7";
-		nvidia,function = "i2s4";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	cam_mclk_pcc0 {
-		nvidia,pins = "cam_mclk_pcc0";
-		nvidia,function = "vi_alt3";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	pcc1 {
-		nvidia,pins = "pcc1";
-		nvidia,function = "i2s4";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	pcc2 {
-		nvidia,pins = "pcc2";
-		nvidia,function = "i2s4";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	sdmmc4_rst_n_pcc3 {
-		nvidia,pins = "sdmmc4_rst_n_pcc3";
-		nvidia,function = "sdmmc4";
-		nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-		nvidia,io-reset = <TEGRA_PIN_DISABLE>;
-	};
-	sdmmc4_clk_pcc4 {
-		nvidia,pins = "sdmmc4_clk_pcc4";
-		nvidia,function = "sdmmc4";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-		nvidia,io-reset = <TEGRA_PIN_DISABLE>;
-	};
-	clk2_req_pcc5 {
-		nvidia,pins = "clk2_req_pcc5";
-		nvidia,function = "dap";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	pex_l2_rst_n_pcc6 {
-		nvidia,pins = "pex_l2_rst_n_pcc6";
-		nvidia,function = "pcie";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	pex_l2_clkreq_n_pcc7 {
-		nvidia,pins = "pex_l2_clkreq_n_pcc7";
-		nvidia,function = "pcie";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	pex_l0_prsnt_n_pdd0 {
-		nvidia,pins = "pex_l0_prsnt_n_pdd0";
-		nvidia,function = "pcie";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	pex_l0_rst_n_pdd1 {
-		nvidia,pins = "pex_l0_rst_n_pdd1";
-		nvidia,function = "pcie";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	pex_l0_clkreq_n_pdd2 {
-		nvidia,pins = "pex_l0_clkreq_n_pdd2";
-		nvidia,function = "pcie";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	pex_wake_n_pdd3 {
-		nvidia,pins = "pex_wake_n_pdd3";
-		nvidia,function = "pcie";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	pex_l1_prsnt_n_pdd4 {
-		nvidia,pins = "pex_l1_prsnt_n_pdd4";
-		nvidia,function = "pcie";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	pex_l1_rst_n_pdd5 {
-		nvidia,pins = "pex_l1_rst_n_pdd5";
-		nvidia,function = "pcie";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	pex_l1_clkreq_n_pdd6 {
-		nvidia,pins = "pex_l1_clkreq_n_pdd6";
-		nvidia,function = "pcie";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	pex_l2_prsnt_n_pdd7 {
-		nvidia,pins = "pex_l2_prsnt_n_pdd7";
-		nvidia,function = "pcie";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	clk3_out_pee0 {
-		nvidia,pins = "clk3_out_pee0";
-		nvidia,function = "extperiph3";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	clk3_req_pee1 {
-		nvidia,pins = "clk3_req_pee1";
-		nvidia,function = "dev3";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	clk1_req_pee2 {
-		nvidia,pins = "clk1_req_pee2";
-		nvidia,function = "dap";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	hdmi_cec_pee3 {
-		nvidia,pins = "hdmi_cec_pee3";
-		nvidia,function = "cec";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-		nvidia,open-drain = <TEGRA_PIN_DISABLE>;
-	};
-	owr {
-		nvidia,pins = "owr";
-		nvidia,function = "owr";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	drive_groups {
-		nvidia,pins = "drive_gma",
-			      "drive_gmb",
-			      "drive_gmc",
-			      "drive_gmd";
-		nvidia,pull-down-strength = <9>;
-		nvidia,pull-up-strength = <9>;
-		nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
-		nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
-	};
-};
 
 &emc_icc_dvfs_opp_table {
-	/delete-node/ opp@900000000,1350;
+	/delete-node/ opp-900000000-1350;
 };
 
 &emc_bw_dfs_opp_table {
-	/delete-node/ opp@900000000;
+	/delete-node/ opp-900000000;
 };
diff --git a/dts/src/arm/tegra30-pegatron-chagall.dts b/dts/src/arm/tegra30-pegatron-chagall.dts
new file mode 100644
index 0000000000..f4b2d42188
--- /dev/null
+++ b/dts/src/arm/tegra30-pegatron-chagall.dts
@@ -0,0 +1,2859 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/thermal/thermal.h>
+
+#include "tegra30.dtsi"
+#include "tegra30-cpu-opp.dtsi"
+#include "tegra30-cpu-opp-microvolt.dtsi"
+#include "tegra30-asus-lvds-display.dtsi"
+
+/ {
+	model = "Pegatron Chagall";
+	compatible = "pegatron,chagall", "nvidia,tegra30";
+	chassis-type = "tablet";
+
+	aliases {
+		mmc0 = &sdmmc4; /* eMMC */
+		mmc1 = &sdmmc1; /* uSD slot */
+		mmc2 = &sdmmc3; /* WiFi */
+
+		rtc0 = &pmic;
+		rtc1 = "/rtc@7000e000";
+
+		display0 = &lcd;
+		display1 = &hdmi;
+
+		serial1 = &uartc; /* Bluetooth */
+		serial2 = &uartb; /* GPS */
+	};
+
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 */
+	chosen {};
+
+	memory@80000000 {
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		linux,cma@80000000 {
+			compatible = "shared-dma-pool";
+			alloc-ranges = <0x80000000 0x30000000>;
+			size = <0x10000000>; /* 256MiB */
+			linux,cma-default;
+			reusable;
+		};
+
+		ramoops@beb00000 {
+			compatible = "ramoops";
+			reg = <0xbeb00000 0x10000>; /* 64kB */
+			console-size = <0x8000>; /* 32kB */
+			record-size = <0x400>; /* 1kB */
+			ecc-size = <16>;
+		};
+
+		trustzone@bfe00000 {
+			reg = <0xbfe00000 0x200000>; /* 2MB */
+			no-map;
+		};
+	};
+
+	host1x@50000000 {
+		hdmi: hdmi@54280000 {
+			status = "okay";
+
+			hdmi-supply = <&hdmi_5v0_sys>;
+			pll-supply = <&vdd_1v8_vio>;
+			vdd-supply = <&vdd_3v3_sys>;
+
+			nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+		};
+	};
+
+	vde@6001a000 {
+		assigned-clocks = <&tegra_car TEGRA30_CLK_VDE>;
+		assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_P>;
+		assigned-clock-rates = <408000000>;
+	};
+
+	pinmux@70000868 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			/* SDMMC1 pinmux */
+			sdmmc1_clk_pz0 {
+				nvidia,pins = "sdmmc1_clk_pz0";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			sdmmc1_dat3_py4 {
+				nvidia,pins = "sdmmc1_dat3_py4",
+						"sdmmc1_dat2_py5",
+						"sdmmc1_dat1_py6",
+						"sdmmc1_dat0_py7",
+						"sdmmc1_cmd_pz1";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* SDMMC2 pinmux */
+			vi_d1_pd5 {
+				nvidia,pins = "vi_d1_pd5",
+						"vi_d2_pl0",
+						"vi_d3_pl1",
+						"vi_d5_pl3",
+						"vi_d7_pl5";
+				nvidia,function = "sdmmc2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			vi_d8_pl6 {
+				nvidia,pins = "vi_d8_pl6",
+						"vi_d9_pl7";
+				nvidia,function = "sdmmc2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+				nvidia,ioreset = <0>;
+			};
+
+			/* SDMMC3 pinmux */
+			sdmmc3_clk_pa6 {
+				nvidia,pins = "sdmmc3_clk_pa6";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			sdmmc3_cmd_pa7 {
+				nvidia,pins = "sdmmc3_cmd_pa7",
+						"sdmmc3_dat3_pb4",
+						"sdmmc3_dat2_pb5",
+						"sdmmc3_dat2_pb5",
+						"sdmmc3_dat1_pb6",
+						"sdmmc3_dat0_pb7",
+						"sdmmc3_dat5_pd0",
+						"sdmmc3_dat4_pd1",
+						"sdmmc3_dat6_pd3",
+						"sdmmc3_dat7_pd4";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* SDMMC4 pinmux */
+			sdmmc4_clk_pcc4 {
+				nvidia,pins = "sdmmc4_clk_pcc4";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			sdmmc4_cmd_pt7 {
+				nvidia,pins = "sdmmc4_cmd_pt7",
+						"sdmmc4_dat0_paa0",
+						"sdmmc4_dat1_paa1",
+						"sdmmc4_dat2_paa2",
+						"sdmmc4_dat3_paa3",
+						"sdmmc4_dat4_paa4",
+						"sdmmc4_dat5_paa5",
+						"sdmmc4_dat6_paa6",
+						"sdmmc4_dat7_paa7";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* I2C pinmux */
+			gen1_i2c_scl_pc4 {
+				nvidia,pins = "gen1_i2c_scl_pc4",
+						"gen1_i2c_sda_pc5";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+			};
+
+			gen2_i2c_scl_pt5 {
+				nvidia,pins = "gen2_i2c_scl_pt5",
+						"gen2_i2c_sda_pt6";
+				nvidia,function = "i2c2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+			};
+
+			cam_i2c_scl_pbb1 {
+				nvidia,pins = "cam_i2c_scl_pbb1",
+						"cam_i2c_sda_pbb2";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+			};
+
+			ddc_scl_pv4 {
+				nvidia,pins = "ddc_scl_pv4",
+						"ddc_sda_pv5";
+				nvidia,function = "i2c4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+			};
+
+			pwr_i2c_scl_pz6 {
+				nvidia,pins = "pwr_i2c_scl_pz6",
+						"pwr_i2c_sda_pz7";
+				nvidia,function = "i2cpwr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+			};
+
+			/* HDMI-CEC pinmux */
+			hdmi_cec_pee3 {
+				nvidia,pins = "hdmi_cec_pee3";
+				nvidia,function = "cec";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+			};
+
+			/* UART-A */
+			ulpi_data0_po1 {
+				nvidia,pins = "ulpi_data0_po1";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			ulpi_data1_po2 {
+				nvidia,pins = "ulpi_data1_po2",
+						"ulpi_data2_po3",
+						"ulpi_data3_po4",
+						"ulpi_data4_po5",
+						"ulpi_data5_po6",
+						"ulpi_data6_po7";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			ulpi_data7_po0 {
+				nvidia,pins = "ulpi_data7_po0";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* UART-B */
+			uart2_txd_pc2 {
+				nvidia,pins = "uart2_txd_pc2",
+						"uart2_rts_n_pj6";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			uart2_rxd_pc3 {
+				nvidia,pins = "uart2_rxd_pc3",
+						"uart2_cts_n_pj5";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* UART-C */
+			uart3_cts_n_pa1 {
+				nvidia,pins = "uart3_cts_n_pa1",
+						"uart3_rxd_pw7";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			uart3_rts_n_pc0 {
+				nvidia,pins = "uart3_rts_n_pc0",
+						"uart3_txd_pw6";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* UART-D */
+			ulpi_clk_py0 {
+				nvidia,pins = "ulpi_clk_py0",
+						"ulpi_stp_py3";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			ulpi_dir_py1 {
+				nvidia,pins = "ulpi_dir_py1",
+						"ulpi_nxt_py2";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* I2S pinmux */
+			dap1_fs_pn0 {
+				nvidia,pins = "dap1_fs_pn0",
+						"dap1_din_pn1",
+						"dap1_dout_pn2",
+						"dap1_sclk_pn3";
+				nvidia,function = "i2s0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			dap2_fs_pa2 {
+				nvidia,pins = "dap2_fs_pa2",
+						"dap2_sclk_pa3",
+						"dap2_din_pa4",
+						"dap2_dout_pa5";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			dap3_fs_pp0 {
+				nvidia,pins = "dap3_fs_pp0",
+						"dap3_din_pp1",
+						"dap3_dout_pp2",
+						"dap3_sclk_pp3";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			dap4_fs_pp4 {
+				nvidia,pins = "dap4_fs_pp4",
+						"dap4_din_pp5",
+						"dap4_dout_pp6",
+						"dap4_sclk_pp7";
+				nvidia,function = "i2s3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pcc2 {
+				nvidia,pins = "pcc2";
+				nvidia,function = "i2s4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* PCI-e pinmux */
+			pex_l2_rst_n_pcc6 {
+				nvidia,pins = "pex_l2_rst_n_pcc6",
+						"pex_l0_rst_n_pdd1",
+						"pex_l1_rst_n_pdd5";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pex_l2_clkreq_n_pcc7 {
+				nvidia,pins = "pex_l2_clkreq_n_pcc7",
+						"pex_l0_prsnt_n_pdd0",
+						"pex_l0_clkreq_n_pdd2",
+						"pex_l2_prsnt_n_pdd7";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pex_wake_n_pdd3 {
+				nvidia,pins = "pex_wake_n_pdd3";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* SPI pinmux */
+			spi1_mosi_px4 {
+				nvidia,pins = "spi1_mosi_px4",
+						"spi1_sck_px5",
+						"spi1_cs0_n_px6",
+						"spi1_miso_px7";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			spi2_cs1_n_pw2 {
+				nvidia,pins = "spi2_cs1_n_pw2",
+						"spi2_cs2_n_pw3";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			spi2_sck_px2 {
+				nvidia,pins = "spi2_sck_px2";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi_a16_pj7 {
+				nvidia,pins = "gmi_a16_pj7",
+						"gmi_a19_pk7";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi_a17_pb0 {
+				nvidia,pins = "gmi_a17_pb0",
+						"gmi_a18_pb1";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			spi2_mosi_px0 {
+				nvidia,pins = "spi2_mosi_px0";
+				nvidia,function = "spi6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			spdif_out_pk5 {
+				nvidia,pins = "spdif_out_pk5";
+				nvidia,function = "spdif";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			spdif_in_pk6 {
+				nvidia,pins = "spdif_in_pk6";
+				nvidia,function = "spdif";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Display A pinmux */
+			lcd_pwr0_pb2 {
+				nvidia,pins = "lcd_pwr0_pb2",
+						"lcd_pclk_pb3",
+						"lcd_pwr1_pc1",
+						"lcd_pwr2_pc6",
+						"lcd_d0_pe0",
+						"lcd_d1_pe1",
+						"lcd_d2_pe2",
+						"lcd_d3_pe3",
+						"lcd_d4_pe4",
+						"lcd_d5_pe5",
+						"lcd_d6_pe6",
+						"lcd_d7_pe7",
+						"lcd_d8_pf0",
+						"lcd_d9_pf1",
+						"lcd_d10_pf2",
+						"lcd_d11_pf3",
+						"lcd_d12_pf4",
+						"lcd_d13_pf5",
+						"lcd_d14_pf6",
+						"lcd_d15_pf7",
+						"lcd_de_pj1",
+						"lcd_hsync_pj3",
+						"lcd_vsync_pj4",
+						"lcd_d16_pm0",
+						"lcd_d17_pm1",
+						"lcd_d18_pm2",
+						"lcd_d19_pm3",
+						"lcd_d20_pm4",
+						"lcd_d21_pm5",
+						"lcd_d22_pm6",
+						"lcd_d23_pm7",
+						"lcd_cs0_n_pn4",
+						"lcd_sdout_pn5",
+						"lcd_dc0_pn6",
+						"lcd_sdin_pz2",
+						"lcd_wr_n_pz3",
+						"lcd_sck_pz4",
+						"lcd_cs1_n_pw0",
+						"lcd_m1_pw1";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			lcd_dc1_pd2 {
+				nvidia,pins = "lcd_dc1_pd2";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			clk_32k_out_pa0 {
+				nvidia,pins = "clk_32k_out_pa0";
+				nvidia,function = "blink";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* KBC keys */
+			kb_row0_pr0 {
+				nvidia,pins = "kb_row0_pr0",
+						"kb_row1_pr1",
+						"kb_row2_pr2",
+						"kb_row3_pr3",
+						"kb_row8_ps0",
+						"kb_col0_pq0",
+						"kb_col1_pq1",
+						"kb_col2_pq2",
+						"kb_col3_pq3",
+						"kb_col4_pq4",
+						"kb_col5_pq5",
+						"kb_col7_pq7";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			kb_row4_pr4 {
+				nvidia,pins = "kb_row4_pr4",
+						"kb_row7_pr7",
+						"kb_row10_ps2",
+						"kb_row13_ps5";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			kb_row11_ps3 {
+				nvidia,pins = "kb_row11_ps3",
+						"kb_row12_ps4",
+						"kb_row15_ps7";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			kb_row14_ps6 {
+				nvidia,pins = "kb_row14_ps6";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_iordy_pi5 {
+				nvidia,pins = "gmi_iordy_pi5";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			vi_pclk_pt0 {
+				nvidia,pins = "vi_pclk_pt0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+				nvidia,ioreset = <0>;
+			};
+
+			pu1 {
+				nvidia,pins = "pu1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pu2 {
+				nvidia,pins = "pu2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pv0 {
+				nvidia,pins = "pv0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pv1 {
+				nvidia,pins = "pv1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pcc1 {
+				nvidia,pins = "pcc1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			sdmmc4_rst_n_pcc3 {
+				nvidia,pins = "sdmmc4_rst_n_pcc3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pv3 {
+				nvidia,pins = "pv3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			vi_vsync_pd6 {
+				nvidia,pins = "vi_vsync_pd6",
+						"vi_hsync_pd7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+				nvidia,ioreset = <0>;
+			};
+
+			vi_d10_pt2 {
+				nvidia,pins = "vi_d10_pt2",
+						"vi_d0_pt4", "pbb0";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			vi_d11_pt3 {
+				nvidia,pins = "vi_d11_pt3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pu0 {
+				nvidia,pins = "pu0";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pu3 {
+				nvidia,pins = "pu3";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pu6 {
+				nvidia,pins = "pu6";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pex_l1_prsnt_n_pdd4 {
+				nvidia,pins = "pex_l1_prsnt_n_pdd4",
+						"pex_l1_clkreq_n_pdd6";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi_wait_pi7 {
+				nvidia,pins = "gmi_wait_pi7",
+						"gmi_cs0_n_pj0",
+						"gmi_cs1_n_pj2",
+						"gmi_cs4_n_pk2";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_ad0_pg0 {
+				nvidia,pins = "gmi_ad0_pg0",
+						"gmi_ad1_pg1",
+						"gmi_ad2_pg2",
+						"gmi_ad3_pg3",
+						"gmi_ad4_pg4",
+						"gmi_ad5_pg5",
+						"gmi_ad6_pg6",
+						"gmi_ad7_pg7",
+						"gmi_wr_n_pi0",
+						"gmi_oe_n_pi1",
+						"gmi_dqs_pi2",
+						"gmi_adv_n_pk0",
+						"gmi_clk_pk1";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_cs2_n_pk3 {
+				nvidia,pins = "gmi_cs2_n_pk3";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi_cs3_n_pk4 {
+				nvidia,pins = "gmi_cs3_n_pk4";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_ad10_ph2 {
+				nvidia,pins = "gmi_ad10_ph2",
+						"gmi_ad11_ph3",
+						"gmi_ad14_ph6";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_ad13_ph5 {
+				nvidia,pins = "gmi_ad13_ph5",
+						"gmi_ad12_ph4",
+						"gmi_cs7_n_pi6";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi_rst_n_pi4 {
+				nvidia,pins = "gmi_rst_n_pi4";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi_ad8_ph0 {
+				nvidia,pins = "gmi_ad8_ph0";
+				nvidia,function = "pwm0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_ad9_ph1 {
+				nvidia,pins = "gmi_ad9_ph1";
+				nvidia,function = "pwm1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_wp_n_pc7 {
+				nvidia,pins = "gmi_wp_n_pc7";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi_cs6_n_pi3 {
+				nvidia,pins = "gmi_cs6_n_pi3";
+				nvidia,function = "sata";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			vi_d4_pl2 {
+				nvidia,pins = "vi_d4_pl2";
+				nvidia,function = "vi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			vi_d6_pl4 {
+				nvidia,pins = "vi_d6_pl4";
+				nvidia,function = "vi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,lock = <0>;
+				nvidia,ioreset = <0>;
+			};
+
+			vi_mclk_pt1 {
+				nvidia,pins = "vi_mclk_pt1";
+				nvidia,function = "vi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* HDMI hot-plug-detect */
+			hdmi_int_pn7 {
+				nvidia,pins = "hdmi_int_pn7";
+				nvidia,function = "hdmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pu4 {
+				nvidia,pins = "pu4";
+				nvidia,function = "pwm1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pu5 {
+				nvidia,pins = "pu5";
+				nvidia,function = "pwm2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			jtag_rtck_pu7 {
+				nvidia,pins = "jtag_rtck_pu7";
+				nvidia,function = "rtck";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			crt_hsync_pv6 {
+				nvidia,pins = "crt_hsync_pv6",
+						"crt_vsync_pv7";
+				nvidia,function = "crt";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			clk1_out_pw4 {
+				nvidia,pins = "clk1_out_pw4";
+				nvidia,function = "extperiph1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			clk2_out_pw5 {
+				nvidia,pins = "clk2_out_pw5";
+				nvidia,function = "extperiph2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			clk3_out_pee0 {
+				nvidia,pins = "clk3_out_pee0";
+				nvidia,function = "extperiph3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			sys_clk_req_pz5 {
+				nvidia,pins = "sys_clk_req_pz5";
+				nvidia,function = "sysclk";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pbb4 {
+				nvidia,pins = "pbb4";
+				nvidia,function = "vgp4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pbb5 {
+				nvidia,pins = "pbb5";
+				nvidia,function = "vgp5";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pbb6 {
+				nvidia,pins = "pbb6";
+				nvidia,function = "vgp6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			clk1_req_pee2 {
+				nvidia,pins = "clk1_req_pee2";
+				nvidia,function = "dap";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			clk2_req_pcc5 {
+				nvidia,pins = "clk2_req_pcc5";
+				nvidia,function = "dap";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			clk3_req_pee1 {
+				nvidia,pins = "clk3_req_pee1";
+				nvidia,function = "dev3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			owr {
+				nvidia,pins = "owr";
+				nvidia,function = "owr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pv2 {
+				nvidia,pins = "pv2",
+						"kb_row5_pr5";
+				nvidia,function = "owr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pbb3 {
+				nvidia,pins = "pbb3";
+				nvidia,function = "vgp3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pbb7 {
+				nvidia,pins = "pbb7";
+				nvidia,function = "i2s4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			cam_mclk_pcc0 {
+				nvidia,pins = "cam_mclk_pcc0";
+				nvidia,function = "vi_alt3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* GPIO power/drive control */
+			drive_dap1 {
+				nvidia,pins = "drive_dap1",
+						"drive_dap2",
+						"drive_dbg",
+						"drive_at5",
+						"drive_gme",
+						"drive_ddc",
+						"drive_ao1",
+						"drive_uart3";
+				nvidia,high-speed-mode = <0>;
+				nvidia,schmitt = <TEGRA_PIN_ENABLE>;
+				nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
+				nvidia,pull-down-strength = <31>;
+				nvidia,pull-up-strength = <31>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+			};
+
+			drive_sdio1 {
+				nvidia,pins = "drive_sdio1";
+				nvidia,high-speed-mode = <0>;
+				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+				nvidia,pull-down-strength = <5>;
+				nvidia,pull-up-strength = <5>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FAST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FAST>;
+			};
+
+			drive_sdio3 {
+				nvidia,pins = "drive_sdio3";
+				nvidia,high-speed-mode = <0>;
+				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+				nvidia,pull-down-strength = <46>;
+				nvidia,pull-up-strength = <42>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FAST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FAST>;
+			};
+
+			drive_gma {
+				nvidia,pins = "drive_gma",
+						"drive_gmb",
+						"drive_gmc",
+						"drive_gmd";
+				nvidia,pull-down-strength = <9>;
+				nvidia,pull-up-strength = <9>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+			};
+
+			drive_lcd2 {
+				nvidia,pins = "drive_lcd2";
+				nvidia,high-speed-mode = <0>;
+				nvidia,schmitt = <TEGRA_PIN_ENABLE>;
+				nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_4>;
+				nvidia,pull-down-strength = <20>;
+				nvidia,pull-up-strength = <20>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+			};
+		};
+	};
+
+	uartb: serial@70006040 {
+		compatible = "nvidia,tegra30-hsuart";
+		status = "okay";
+
+		/* Broadcom GPS BCM47511 */
+	};
+
+	uartc: serial@70006200 {
+		compatible = "nvidia,tegra30-hsuart";
+		status = "okay";
+
+		nvidia,adjust-baud-rates = <0 9600 100>,
+					   <9600 115200 200>,
+					   <1000000 4000000 136>;
+
+		/* Azurewave AW-AH663 BCM4330B1 */
+		bluetooth {
+			compatible = "brcm,bcm4330-bt";
+			max-speed = <4000000>;
+
+			clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>;
+			clock-names = "txco";
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(U, 6) IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "host-wakeup";
+
+			device-wakeup-gpios = <&gpio TEGRA_GPIO(U, 1) GPIO_ACTIVE_HIGH>;
+			shutdown-gpios = <&gpio TEGRA_GPIO(U, 0) GPIO_ACTIVE_HIGH>;
+
+			vbat-supply  = <&vdd_3v3_sys>;
+			vddio-supply = <&vdd_1v8_vio>;
+		};
+	};
+
+	pwm: pwm@7000a000 {
+		status = "okay";
+	};
+
+	lcd_ddc: i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		/* Wolfson Microelectronics WM8903 audio codec */
+		wm8903: audio-codec@1a {
+			compatible = "wlf,wm8903";
+			reg = <0x1a>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_EDGE_BOTH>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			micdet-cfg = <0>;
+			micdet-delay = <100>;
+
+			gpio-cfg = <0xffffffff 0xffffffff 0 0xffffffff 0xffffffff>;
+
+			AVDD-supply  = <&vdd_1v8_vio>;
+			CPVDD-supply = <&vdd_1v8_vio>;
+			DBVDD-supply = <&vdd_1v8_vio>;
+			DCVDD-supply = <&vdd_1v8_vio>;
+		};
+	};
+
+	i2c2: i2c@7000c400 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		/* Atmel touchscreen */
+		touchscreen@4d {
+			compatible = "atmel,maxtouch";
+			reg = <0x4d>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(H, 4) IRQ_TYPE_EDGE_FALLING>;
+			reset-gpios = <&gpio TEGRA_GPIO(H, 6) GPIO_ACTIVE_LOW>;
+
+			vdda-supply = <&vdd_3v3_sys>;
+			vdd-supply  = <&vdd_3v3_sys>;
+		};
+	};
+
+	i2c3: i2c@7000c500 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		light-sensor@44 {
+			compatible = "isil,isl29023";
+			reg = <0x44>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(Q, 3) IRQ_TYPE_LEVEL_HIGH>;
+
+			vcc-supply = <&vdd_3v3_sen>;
+		};
+
+		/* AsahiKASEI AK8975 magnetometer sensor */
+		magnetometer@c {
+			compatible = "asahi-kasei,ak8975";
+			reg = <0x0c>;
+
+			vdd-supply = <&vdd_3v3_sen>;
+			vid-supply = <&vdd_1v8_vio>;
+
+			mount-matrix =   "0",  "1",  "0",
+					 "1",  "0",  "0",
+					 "0",  "0", "-1";
+		};
+
+		gyroscope@68 {
+			compatible = "invensense,mpu3050";
+			reg = <0x68>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(X, 1) IRQ_TYPE_EDGE_RISING>;
+
+			vdd-supply = <&vdd_3v3_sen>;
+			vlogic-supply = <&vdd_1v8_vio>;
+
+			mount-matrix =   "0",  "1",  "0",
+					 "1",  "0",  "0",
+					 "0",  "0", "-1";
+
+			/* External I2C interface */
+			i2c-gate {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				accelerometer@f {
+					compatible = "kionix,kxtf9";
+					reg = <0x0f>;
+
+					interrupt-parent = <&gpio>;
+					interrupts = <TEGRA_GPIO(L, 1) IRQ_TYPE_EDGE_RISING>;
+
+					vdd-supply = <&vdd_1v8_vio>;
+					vddio-supply = <&vdd_1v8_vio>;
+
+					mount-matrix =  "-1",  "0",  "0",
+							 "0",  "1",  "0",
+							 "0",  "0",  "1";
+				};
+			};
+		};
+	};
+
+	hdmi_ddc: i2c@7000c700 {
+		status = "okay";
+		clock-frequency = <93750>;
+	};
+
+	i2c5: i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		nct72: temperature-sensor@4c {
+			compatible = "onnn,nct1008";
+			reg = <0x4c>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(U, 5) IRQ_TYPE_EDGE_FALLING>;
+
+			vcc-supply = <&vdd_3v3_sys>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		/* Texas Instruments TPS659110 PMIC */
+		pmic: pmic@2d {
+			compatible = "ti,tps65911";
+			reg = <0x2d>;
+
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			wakeup-source;
+
+			ti,en-gpio-sleep = <0 0 1 0 0 0 0 0 0>;
+			ti,system-power-controller;
+			ti,sleep-keep-ck32k;
+			ti,sleep-enable;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			vcc1-supply = <&vdd_5v0_sys>;
+			vcc2-supply = <&vdd_5v0_sys>;
+			vcc3-supply = <&vdd_1v8_vio>;
+			vcc4-supply = <&vdd_1v8_vio>;
+			vcc5-supply = <&vdd_5v0_sys>;
+			vcc6-supply = <&vddio_1v2_ddr>;
+			vcc7-supply = <&vdd_5v0_sys>;
+			vccio-supply = <&vdd_5v0_sys>;
+
+			pmic-sleep-hog {
+				gpio-hog;
+				gpios = <0 GPIO_ACTIVE_HIGH>,
+					<2 GPIO_ACTIVE_HIGH>,
+					<6 GPIO_ACTIVE_HIGH>,
+					<8 GPIO_ACTIVE_HIGH>;
+				output-high;
+			};
+
+			regulators {
+				/* VDD1 is not used by Chagall */
+
+				vddio_1v2_ddr: vdd2 {
+					regulator-name = "vddio_1v2_ddr";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				vdd_cpu: vddctrl {
+					regulator-name = "vdd_cpu,vdd_sys";
+					regulator-min-microvolt = <600000>;
+					regulator-max-microvolt = <1400000>;
+					regulator-coupled-with = <&vdd_core>;
+					regulator-coupled-max-spread = <300000>;
+					regulator-max-step-microvolt = <100000>;
+					regulator-always-on;
+					regulator-boot-on;
+					ti,regulator-ext-sleep-control = <1>;
+
+					nvidia,tegra-cpu-regulator;
+				};
+
+				vdd_1v8_vio: vio {
+					regulator-name = "vdd_1v8_gen";
+					/* FIXME: eMMC won't work, if set to 1.8 V */
+					regulator-min-microvolt = <1500000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				/* eMMC VDD */
+				vcore_emmc: ldo1 {
+					regulator-name = "vdd_emmc_core";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				/* uSD slot VDD */
+				vdd_usd: ldo2 {
+					regulator-name = "vdd_usd";
+					regulator-min-microvolt = <3200000>;
+					regulator-max-microvolt = <3200000>;
+				};
+
+				/* uSD slot VDDIO */
+				vddio_usd: ldo3 {
+					regulator-name = "vddio_usd";
+					regulator-min-microvolt = <1900000>;
+					regulator-max-microvolt = <3200000>;
+				};
+
+				ldo4 {
+					regulator-name = "vdd_rtc";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				ldo5 {
+					regulator-name = "vdd_1v3_cam_isp";
+					regulator-min-microvolt = <1300000>;
+					regulator-max-microvolt = <1300000>;
+				};
+
+				ldo6 {
+					regulator-name = "avdd_dsi_csi,pwrdet_mipi";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				ldo7 {
+					regulator-name = "vdd_pllm,x,u,a_p_c_s";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					regulator-boot-on;
+					ti,regulator-ext-sleep-control = <8>;
+				};
+
+				ldo8 {
+					regulator-name = "vdd_ddr_hs";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+					ti,regulator-ext-sleep-control = <8>;
+				};
+			};
+		};
+
+		vdd_core: core-regulator@60 {
+			compatible = "ti,tps62361";
+			reg = <0x60>;
+
+			regulator-name = "tps62361-vout";
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1770000>;
+			regulator-coupled-with = <&vdd_cpu>;
+			regulator-coupled-max-spread = <300000>;
+			regulator-max-step-microvolt = <100000>;
+			regulator-boot-on;
+			regulator-always-on;
+			ti,enable-vout-discharge;
+			ti,vsel0-state-high;
+			ti,vsel1-state-high;
+
+			nvidia,tegra-core-regulator;
+		};
+	};
+
+	vdd_5v0_sys: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v0_sys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_3v3_sys: regulator-3v {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v3_sys";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_pnl: regulator-panel {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_panel";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-enable-ramp-delay = <300000>;
+		gpio = <&gpio TEGRA_GPIO(W, 1) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_sys>;
+	};
+
+	vdd_3v3_sen: regulator-sensors {
+		compatible = "regulator-fixed";
+		regulator-name = "sen_3v3_en";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio TEGRA_GPIO(K, 5) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_sys>;
+	};
+
+	vdd_5v0_bl: regulator-bl {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v0_bl";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		gpio = <&gpio TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	hdmi_5v0_sys: regulator-hdmi {
+		compatible = "regulator-fixed";
+		regulator-name = "hdmi_5v0_sys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	vdd_vbus_usb1: regulator-usb1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_vbus_micro_usb";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(DD, 3) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	vdd_vbus_usb3: regulator-usb3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_vbus_typea_usb";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(CC, 6) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	pmc@7000e400 {
+		status = "okay";
+		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <2>;
+		nvidia,cpu-pwr-good-time = <2000>;
+		nvidia,cpu-pwr-off-time = <200>;
+		nvidia,core-pwr-good-time = <3845 3845>;
+		nvidia,core-pwr-off-time = <0>;
+		nvidia,core-power-req-active-high;
+		nvidia,sys-clock-req-active-high;
+		core-supply = <&vdd_core>;
+
+		/* Set DEV_OFF + PWR_OFF_SET bit in DCDC control register of TPS65911 PMIC  */
+		i2c-thermtrip {
+			nvidia,i2c-controller-id = <4>;
+			nvidia,bus-addr = <0x2d>;
+			nvidia,reg-addr = <0x3f>;
+			nvidia,reg-data = <0x81>;
+		};
+	};
+
+	memory-controller@7000f000 {
+		emc-timings-0 {
+			/* SAMSUNG K4P8G304EB FGC1 */
+			nvidia,ram-code = <0>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emem-configuration = < 0x00020001 0xc0000010
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000003 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000002 0x00000002
+					0x02020001 0x00060402 0x73e30303 0x001f0000 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emem-configuration = < 0x00010001 0xc0000010
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000003 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000002 0x00000002
+					0x02020001 0x00060402 0x72c30303 0x001f0000 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = < 0x00000001 0xc0000018
+					0x00000001 0x00000001 0x00000003 0x00000001
+					0x00000003 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000002 0x00000002
+					0x02020001 0x00060403 0x72430504 0x001f0000 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = < 0x00000003 0xc0000025
+					0x00000001 0x00000001 0x00000006 0x00000003
+					0x00000005 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000003 0x00000002
+					0x02030001 0x00070506 0x71e40a07 0x001f0000 >;
+			};
+
+			timing-400000000 {
+				clock-frequency = <400000000>;
+
+				nvidia,emem-configuration = < 0x00000006 0xc0000048
+					0x00000002 0x00000003 0x0000000c 0x00000007
+					0x00000009 0x00000001 0x00000002 0x00000006
+					0x00000001 0x00000000 0x00000004 0x00000004
+					0x04040001 0x000d090c 0x7026120d 0x001f0000 >;
+			};
+		};
+
+		emc-timings-1 {
+			/* ELPIDA EDB8132B2MA 8D_F */
+			nvidia,ram-code = <1>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emem-configuration = < 0x00020001 0xc0000010
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000003 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000002 0x00000002
+					0x02020001 0x00060402 0x73e30303 0x001f0000 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emem-configuration = < 0x00010001 0xc0000010
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000003 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000002 0x00000002
+					0x02020001 0x00060402 0x72c30303 0x001f0000 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = < 0x00000001 0xc0000018
+					0x00000001 0x00000001 0x00000003 0x00000001
+					0x00000003 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000002 0x00000002
+					0x02020001 0x00060403 0x72430504 0x001f0000 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = < 0x00000003 0xc0000025
+					0x00000001 0x00000001 0x00000006 0x00000003
+					0x00000005 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000003 0x00000002
+					0x02030001 0x00070506 0x71e40a07 0x001f0000 >;
+			};
+
+			timing-400000000 {
+				clock-frequency = <400000000>;
+
+				nvidia,emem-configuration = < 0x00000006 0xc0000048
+					0x00000002 0x00000003 0x0000000c 0x00000007
+					0x00000009 0x00000001 0x00000002 0x00000006
+					0x00000001 0x00000000 0x00000004 0x00000004
+					0x04040001 0x000d090c 0x7026120d 0x001f0000 >;
+			};
+		};
+
+		emc-timings-2 {
+			/* SAMSUNG K4P8G304EB FGC2 */
+			nvidia,ram-code = <2>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emem-configuration = < 0x00020001 0xc0000010
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000003 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000002 0x00000002
+					0x02020001 0x00060402 0x73e30303 0x001f0000 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emem-configuration = < 0x00010001 0xc0000010
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000003 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000002 0x00000002
+					0x02020001 0x00060402 0x72c30303 0x001f0000 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = < 0x00000001 0xc0000018
+					0x00000001 0x00000001 0x00000003 0x00000001
+					0x00000003 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000002 0x00000002
+					0x02020001 0x00060403 0x72430504 0x001f0000 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = < 0x00000003 0xc0000025
+					0x00000001 0x00000001 0x00000006 0x00000003
+					0x00000005 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000003 0x00000002
+					0x02030001 0x00070506 0x71e40a07 0x001f0000 >;
+			};
+
+			timing-533000000 {
+				clock-frequency = <533000000>;
+
+				nvidia,emem-configuration = < 0x00000008 0xc0000060
+					0x00000003 0x00000004 0x00000010 0x0000000a
+					0x0000000d 0x00000002 0x00000002 0x00000008
+					0x00000002 0x00000000 0x00000004 0x00000005
+					0x05040002 0x00110b10 0x70281811 0x001f0000 >;
+			};
+		};
+
+		emc-timings-3 {
+			/* HYNIX H9TCNNN8JDMMPR NGM */
+			nvidia,ram-code = <3>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emem-configuration = < 0x00020001 0xc0000010
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000003 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000002 0x00000002
+					0x02020001 0x00060402 0x73e30303 0x001f0000 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emem-configuration = < 0x00010001 0xc0000010
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000003 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000002 0x00000002
+					0x02020001 0x00060402 0x72c30303 0x001f0000 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = < 0x00000001 0xc0000018
+					0x00000001 0x00000001 0x00000003 0x00000001
+					0x00000003 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000002 0x00000002
+					0x02020001 0x00060403 0x72430504 0x001f0000 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = < 0x00000003 0xc0000025
+					0x00000001 0x00000001 0x00000006 0x00000003
+					0x00000005 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000003 0x00000002
+					0x02030001 0x00070506 0x71e40a07 0x001f0000 >;
+			};
+
+			timing-533000000 {
+				clock-frequency = <533000000>;
+
+				nvidia,emem-configuration = < 0x00000008 0xc0000060
+					0x00000003 0x00000004 0x00000010 0x0000000a
+					0x0000000d 0x00000002 0x00000002 0x00000008
+					0x00000002 0x00000000 0x00000004 0x00000005
+					0x05040002 0x00110b10 0x70281811 0x001f0000 >;
+			};
+		};
+	};
+
+	memory-controller@7000f400 {
+		emc-timings-0 {
+			/* SAMSUNG K4P8G304EB FGC1 */
+			nvidia,ram-code = <0>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010022>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000009>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000001
+					0x00000003 0x00000002 0x00000002 0x00000004
+					0x00000004 0x00000001 0x00000005 0x00000002
+					0x00000002 0x00000001 0x00000001 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000b
+					0x00000009 0x00000060 0x00000000 0x00000018
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000007 0x00000004 0x00000004
+					0x00000003 0x00000008 0x00000004 0x00000004
+					0x00000002 0x0000006b 0x00000004 0x00000004
+					0x00000000 0x00000000 0x00004282 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00100220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x0000000a 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x800001c5 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010022>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000009>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000003
+					0x00000006 0x00000002 0x00000002 0x00000004
+					0x00000004 0x00000001 0x00000005 0x00000002
+					0x00000002 0x00000001 0x00000001 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000b
+					0x00000009 0x000000c0 0x00000000 0x00000030
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000007 0x00000008 0x00000008
+					0x00000003 0x00000008 0x00000004 0x00000004
+					0x00000002 0x000000d5 0x00000004 0x00000004
+					0x00000000 0x00000000 0x00004282 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00100220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x00000013 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x80000287 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010022>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x0000000a>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000006
+					0x0000000d 0x00000004 0x00000002 0x00000004
+					0x00000004 0x00000001 0x00000005 0x00000002
+					0x00000002 0x00000001 0x00000001 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000b
+					0x00000009 0x00000181 0x00000000 0x00000060
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000007 0x0000000f 0x0000000f
+					0x00000003 0x00000008 0x00000004 0x00000004
+					0x00000002 0x000001a9 0x00000004 0x00000004
+					0x00000000 0x00000000 0x00004282 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00100220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x00000025 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x8000040b 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010042>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000013>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x0000000c
+					0x0000001a 0x00000008 0x00000003 0x00000005
+					0x00000004 0x00000001 0x00000006 0x00000003
+					0x00000003 0x00000002 0x00000002 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000c
+					0x0000000a 0x00000303 0x00000000 0x000000c0
+					0x00000001 0x00000001 0x00000003 0x00000000
+					0x00000001 0x00000007 0x0000001d 0x0000001d
+					0x00000004 0x0000000b 0x00000005 0x00000004
+					0x00000002 0x00000351 0x00000004 0x00000006
+					0x00000000 0x00000000 0x00004282 0x004400a4
+					0x00008000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x000e0220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x0000004a 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x80000713 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-400000000 {
+				clock-frequency = <400000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010082>;
+				nvidia,emc-mode-2 = <0x00020004>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000024>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000017
+					0x00000033 0x00000010 0x00000007 0x00000007
+					0x00000007 0x00000002 0x0000000a 0x00000007
+					0x00000007 0x00000003 0x00000002 0x00000000
+					0x00000003 0x00000007 0x00000004 0x0000000d
+					0x0000000e 0x000005e9 0x00000000 0x0000017a
+					0x00000002 0x00000002 0x00000007 0x00000000
+					0x00000001 0x0000000c 0x00000038 0x00000038
+					0x00000006 0x00000014 0x00000009 0x00000004
+					0x00000002 0x00000680 0x00000000 0x00000006
+					0x00000000 0x00000000 0x00006282 0x001d0084
+					0x00008000 0x00034000 0x00034000 0x00034000
+					0x00034000 0x00034000 0x00034000 0x00034000
+					0x00034000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00038000 0x00038000 0x00038000
+					0x00038000 0x00080220 0x0800003d 0x00000000
+					0x77ffc004 0x01f1f408 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x00000090 0x000c000c 0xa0f10404 0x00000000
+					0x00000000 0x80000ce6 0xe0000000 0xff00ff88 >;
+			};
+		};
+
+		emc-timings-1 {
+			/* ELPIDA EDB8132B2MA 8D_F */
+			nvidia,ram-code = <1>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010022>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000009>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000001
+					0x00000003 0x00000002 0x00000002 0x00000004
+					0x00000004 0x00000001 0x00000005 0x00000002
+					0x00000002 0x00000001 0x00000001 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000b
+					0x0000000a 0x00000060 0x00000000 0x00000018
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000007 0x00000004 0x00000004
+					0x00000003 0x00000008 0x00000004 0x00000004
+					0x00000002 0x0000006b 0x00000004 0x00000004
+					0x00000000 0x00000000 0x00004282 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00100220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x0000000a 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x800001c5 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010022>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000009>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000003
+					0x00000006 0x00000002 0x00000002 0x00000004
+					0x00000004 0x00000001 0x00000005 0x00000002
+					0x00000002 0x00000001 0x00000001 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000b
+					0x0000000a 0x000000c0 0x00000000 0x00000030
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000007 0x00000008 0x00000008
+					0x00000003 0x00000008 0x00000004 0x00000004
+					0x00000002 0x000000d5 0x00000004 0x00000004
+					0x00000000 0x00000000 0x00004282 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00100220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x00000013 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x80000287 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010022>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x0000000a>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000006
+					0x0000000d 0x00000004 0x00000002 0x00000004
+					0x00000004 0x00000001 0x00000005 0x00000002
+					0x00000002 0x00000001 0x00000001 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000b
+					0x0000000a 0x00000181 0x00000000 0x00000060
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000007 0x0000000f 0x0000000f
+					0x00000003 0x00000008 0x00000004 0x00000004
+					0x00000002 0x000001a9 0x00000004 0x00000004
+					0x00000000 0x00000000 0x00004282 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00100220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x00000025 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x8000040b 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010042>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000013>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x0000000c
+					0x0000001a 0x00000008 0x00000003 0x00000005
+					0x00000004 0x00000001 0x00000006 0x00000003
+					0x00000003 0x00000002 0x00000002 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000c
+					0x0000000a 0x00000303 0x00000000 0x000000c0
+					0x00000001 0x00000001 0x00000003 0x00000000
+					0x00000001 0x00000007 0x0000001d 0x0000001d
+					0x00000004 0x0000000b 0x00000005 0x00000004
+					0x00000002 0x00000351 0x00000004 0x00000006
+					0x00000000 0x00000000 0x00004282 0x004400a4
+					0x00008000 0x00070000 0x00070000 0x00070000
+					0x00070000 0x00070000 0x00070000 0x00070000
+					0x00070000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x000e0220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x0000004a 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x80000713 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-400000000 {
+				clock-frequency = <400000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010082>;
+				nvidia,emc-mode-2 = <0x00020004>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000024>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000017
+					0x00000033 0x00000010 0x00000007 0x00000007
+					0x00000007 0x00000002 0x0000000a 0x00000007
+					0x00000007 0x00000003 0x00000002 0x00000000
+					0x00000003 0x00000007 0x00000004 0x0000000d
+					0x0000000e 0x000005e9 0x00000000 0x0000017a
+					0x00000002 0x00000002 0x00000007 0x00000000
+					0x00000001 0x0000000c 0x00000038 0x00000038
+					0x00000006 0x00000014 0x00000009 0x00000004
+					0x00000002 0x00000680 0x00000000 0x00000004
+					0x00000000 0x00000000 0x00006282 0x001d0084
+					0x00008000 0x00034000 0x00034000 0x00034000
+					0x00034000 0x00034000 0x00034000 0x00034000
+					0x00034000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00048000 0x00048000 0x00048000
+					0x00048000 0x00060220 0x0800003d 0x00000000
+					0x77ffc004 0x01f1f408 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x00000090 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000ce6 0xe0000000 0xff00ff88 >;
+			};
+		};
+
+		emc-timings-2 {
+			/* SAMSUNG K4P8G304EB FGC2 */
+			nvidia,ram-code = <2>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010022>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000009>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000001
+					0x00000003 0x00000002 0x00000002 0x00000004
+					0x00000004 0x00000001 0x00000005 0x00000002
+					0x00000002 0x00000001 0x00000001 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000b
+					0x0000000a 0x00000060 0x00000000 0x00000018
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000007 0x00000004 0x00000004
+					0x00000003 0x00000008 0x00000004 0x00000004
+					0x00000002 0x0000006b 0x00000004 0x00000004
+					0x00000000 0x00000000 0x00004282 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00100220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x0000000a 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x800001c5 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010022>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000009>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000003
+					0x00000006 0x00000002 0x00000002 0x00000004
+					0x00000004 0x00000001 0x00000005 0x00000002
+					0x00000002 0x00000001 0x00000001 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000b
+					0x0000000a 0x000000c0 0x00000000 0x00000030
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000007 0x00000008 0x00000008
+					0x00000003 0x00000008 0x00000004 0x00000004
+					0x00000002 0x000000d5 0x00000004 0x00000004
+					0x00000000 0x00000000 0x00004282 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00100220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x00000013 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x80000287 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010022>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x0000000a>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000006
+					0x0000000d 0x00000004 0x00000002 0x00000004
+					0x00000004 0x00000001 0x00000005 0x00000002
+					0x00000002 0x00000001 0x00000001 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000b
+					0x00000009 0x00000181 0x00000000 0x00000060
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000007 0x0000000f 0x0000000f
+					0x00000003 0x00000008 0x00000004 0x00000004
+					0x00000002 0x000001a9 0x00000004 0x00000004
+					0x00000000 0x00000000 0x00004282 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00100220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x00000025 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x8000040b 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010042>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000013>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x0000000c
+					0x0000001a 0x00000008 0x00000003 0x00000005
+					0x00000004 0x00000001 0x00000006 0x00000003
+					0x00000003 0x00000002 0x00000002 0x00000000
+					0x00000001 0x00000004 0x00000001 0x0000000c
+					0x0000000a 0x00000303 0x00000000 0x000000c0
+					0x00000001 0x00000001 0x00000003 0x00000000
+					0x00000001 0x00000007 0x0000001d 0x0000001d
+					0x00000004 0x0000000b 0x00000005 0x00000004
+					0x00000002 0x00000351 0x00000005 0x00000004
+					0x00000000 0x00000000 0x00004282 0x004400a4
+					0x00008000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x000e0220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x0000004a 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x80000713 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-533000000 {
+				clock-frequency = <533000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x000100c2>;
+				nvidia,emc-mode-2 = <0x00020006>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000030>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x0000001f
+					0x00000045 0x00000016 0x00000009 0x00000008
+					0x00000009 0x00000003 0x0000000d 0x00000009
+					0x00000009 0x00000005 0x00000003 0x00000000
+					0x00000004 0x0000000a 0x00000006 0x0000000d
+					0x00000010 0x000007df 0x00000000 0x000001f7
+					0x00000003 0x00000003 0x00000009 0x00000000
+					0x00000001 0x0000000f 0x0000004b 0x0000004b
+					0x00000008 0x0000001b 0x0000000c 0x00000004
+					0x00000002 0x000008aa 0x00000000 0x00000004
+					0x00000000 0x00000000 0x00006282 0xf0120091
+					0x00008000 0x007f8008 0x007f8008 0x007f8008
+					0x007f8008 0x007f8008 0x007f8008 0x007f8008
+					0x007f8008 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x0000000c 0x0000000c 0x0000000c
+					0x0000000c 0x00080220 0x0200003d 0x00000000
+					0x77ffc004 0x01f1f408 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x000000c0 0x000e000e 0xa0f10000 0x00000000
+					0x00000000 0x800010d9 0xf0000000 0xff00ff88 >;
+			};
+		};
+
+		emc-timings-3 {
+			/* HYNIX H9TCNNN8JDMMPR NGM */
+			nvidia,ram-code = <3>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010022>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000009>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000001
+					0x00000003 0x00000002 0x00000002 0x00000004
+					0x00000004 0x00000001 0x00000005 0x00000002
+					0x00000002 0x00000001 0x00000001 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000b
+					0x0000000a 0x00000060 0x00000000 0x00000018
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000007 0x00000004 0x00000004
+					0x00000003 0x00000008 0x00000004 0x00000004
+					0x00000002 0x0000006b 0x00000004 0x00000004
+					0x00000000 0x00000000 0x00004282 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00100220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x0000000a 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x800001c5 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010022>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000009>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000003
+					0x00000006 0x00000002 0x00000002 0x00000004
+					0x00000004 0x00000001 0x00000005 0x00000002
+					0x00000002 0x00000001 0x00000001 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000b
+					0x0000000a 0x000000c0 0x00000000 0x00000030
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000007 0x00000008 0x00000008
+					0x00000003 0x00000008 0x00000004 0x00000004
+					0x00000002 0x000000d5 0x00000004 0x00000004
+					0x00000000 0x00000000 0x00004282 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00100220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x00000013 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x80000287 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010022>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x0000000a>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000006
+					0x0000000d 0x00000004 0x00000002 0x00000004
+					0x00000004 0x00000001 0x00000005 0x00000002
+					0x00000002 0x00000001 0x00000001 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000b
+					0x0000000a 0x00000181 0x00000000 0x00000060
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000007 0x0000000f 0x0000000f
+					0x00000003 0x00000008 0x00000004 0x00000004
+					0x00000002 0x000001a9 0x00000004 0x00000004
+					0x00000000 0x00000000 0x00004282 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00100220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x00000025 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x8000040b 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010042>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000013>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x0000000c
+					0x0000001a 0x00000008 0x00000003 0x00000005
+					0x00000004 0x00000001 0x00000006 0x00000003
+					0x00000003 0x00000002 0x00000002 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000c
+					0x0000000b 0x00000303 0x00000000 0x000000c0
+					0x00000001 0x00000001 0x00000003 0x00000000
+					0x00000001 0x00000007 0x0000001d 0x0000001d
+					0x00000004 0x0000000b 0x00000005 0x00000004
+					0x00000002 0x00000351 0x00000004 0x00000006
+					0x00000000 0x00000000 0x00004282 0x004400a4
+					0x00008000 0x00072000 0x00072000 0x00072000
+					0x00072000 0x00072000 0x00072000 0x00072000
+					0x00072000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x000e0220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x0000004a 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x80000713 0xd0000000 0xff00ff00 >;
+			};
+
+			timing-533000000 {
+				clock-frequency = <533000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x000100c2>;
+				nvidia,emc-mode-2 = <0x00020006>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000030>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x0000001f
+					0x00000045 0x00000016 0x00000009 0x00000008
+					0x00000009 0x00000003 0x0000000d 0x00000009
+					0x00000009 0x00000005 0x00000003 0x00000000
+					0x00000004 0x00000009 0x00000006 0x0000000d
+					0x00000010 0x000007df 0x00000000 0x000001f7
+					0x00000003 0x00000003 0x00000009 0x00000000
+					0x00000001 0x0000000f 0x0000004b 0x0000004b
+					0x00000008 0x0000001b 0x0000000c 0x00000004
+					0x00000002 0x000008aa 0x00000000 0x00000006
+					0x00000000 0x00000000 0x00006282 0xf0120091
+					0x00008000 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x0000000c 0x0000000c 0x0000000c
+					0x0000000c 0x000a0220 0x0800003d 0x00000000
+					0x77ffc004 0x01f1f408 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x000000c0 0x000e000e 0xa0f10000 0x00000000
+					0x00000000 0x800010d9 0xe0000000 0xff00ff88 >;
+			};
+		};
+	};
+
+	hda@70030000 {
+		status = "okay";
+	};
+
+	ahub@70080000 {
+		i2s@70080400 { /* i2s1 */
+			status = "okay";
+		};
+
+		/* BT SCO */
+		i2s@70080600 { /* i2s3 */
+			status = "okay";
+		};
+	};
+
+	sdmmc1: mmc@78000000 {
+		status = "okay";
+
+		cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
+		bus-width = <4>;
+
+		vmmc-supply = <&vdd_usd>; /* ldo2 */
+		vqmmc-supply = <&vddio_usd>; /* ldo3 */
+	};
+
+	brcm_wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+
+		clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>;
+		clock-names = "ext_clock";
+
+		reset-gpios = <&gpio TEGRA_GPIO(D, 3) GPIO_ACTIVE_LOW>;
+		post-power-on-delay-ms = <300>;
+		power-off-delay-us = <300>;
+	};
+
+	sdmmc3: mmc@78000400 {
+		status = "okay";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		assigned-clocks = <&tegra_car TEGRA30_CLK_SDMMC3>;
+		assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_C>;
+		assigned-clock-rates = <50000000>;
+
+		max-frequency = <50000000>;
+		keep-power-in-suspend;
+		bus-width = <4>;
+		non-removable;
+
+		mmc-pwrseq = <&brcm_wifi_pwrseq>;
+		vmmc-supply = <&vdd_3v3_sys>;
+		vqmmc-supply = <&vdd_1v8_vio>;
+
+		/* Azurewave AW-AH663 BCM4330B1 */
+		wifi@1 {
+			compatible = "brcm,bcm4329-fmac";
+			reg = <1>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(O, 4) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "host-wake";
+		};
+	};
+
+	sdmmc4: mmc@78000600 {
+		status = "okay";
+		bus-width = <8>;
+		vmmc-supply = <&vcore_emmc>;
+		vqmmc-supply = <&vdd_1v8_vio>;
+		non-removable;
+	};
+
+	usb@7d000000 {
+		compatible = "nvidia,tegra30-udc";
+		status = "okay";
+		dr_mode = "otg";
+		vbus-supply = <&vdd_vbus_usb1>;
+	};
+
+	usb-phy@7d000000 {
+		status = "okay";
+		dr_mode = "otg";
+		nvidia,hssync-start-delay = <0>;
+		nvidia,xcvr-lsfslew = <2>;
+		nvidia,xcvr-lsrslew = <2>;
+	};
+
+	usb@7d008000 {
+		status = "okay";
+	};
+
+	usb-phy@7d008000 {
+		status = "okay";
+		vbus-supply = <&vdd_vbus_usb3>;
+	};
+
+	mains: ac-adapter-detect {
+		compatible = "gpio-charger";
+		charger-type = "mains";
+		gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_HIGH>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+
+		enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+		power-supply = <&vdd_5v0_bl>;
+		pwms = <&pwm 0 5000000>;
+
+		brightness-levels = <1 255>;
+		num-interpolated-steps = <254>;
+		default-brightness-level = <15>;
+	};
+
+	/* PMIC has a built-in 32KHz oscillator which is used by PMC */
+	clk32k_in: clock-32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "pmic-oscillator";
+	};
+
+	cpus {
+		cpu0: cpu@0 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+		cpu1: cpu@1 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+		cpu2: cpu@2 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+		cpu3: cpu@3 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+	};
+
+	display-panel {
+		compatible = "panel-lvds";
+
+		width-mm = <217>;
+		height-mm = <136>;
+
+		data-mapping = "jeida-24";
+
+		panel-timing {
+			/* 1280x800@60Hz */
+			clock-frequency = <68000000>;
+			hactive = <1280>;
+			vactive = <800>;
+			hfront-porch = <48>;
+			hback-porch = <18>;
+			hsync-len = <30>;
+			vsync-len = <5>;
+			vfront-porch = <3>;
+			vback-porch = <12>;
+		};
+	};
+
+	extcon-keys {
+		compatible = "gpio-keys";
+		interrupt-parent = <&gpio>;
+
+		dock-insert {
+			label = "Chagall Dock";
+			gpios = <&gpio TEGRA_GPIO(S, 4) GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_DOCK>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		lineout-detect {
+			label = "Audio dock line-out detect";
+			gpios = <&gpio TEGRA_GPIO(S, 3) GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LINEOUT_INSERT>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+	};
+
+	firmware {
+		trusted-foundations {
+			compatible = "tlm,trusted-foundations";
+			tlm,version-major = <2>;
+			tlm,version-minor = <8>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		interrupt-parent = <&gpio>;
+
+		power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		volume-up {
+			label = "Volume Up";
+			gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		volume-down {
+			label = "Volume Down";
+			gpios = <&gpio TEGRA_GPIO(Q, 1) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+	};
+
+	haptic-feedback {
+		compatible = "gpio-vibrator";
+		enable-gpios = <&gpio TEGRA_GPIO(U, 4) GPIO_ACTIVE_HIGH>;
+		vcc-supply = <&vdd_3v3_sys>;
+	};
+
+	sound {
+		compatible = "pegatron,tegra-audio-wm8903-chagall",
+			     "nvidia,tegra-audio-wm8903";
+		nvidia,model = "Pegatron Chagall WM8903";
+
+		nvidia,audio-routing =
+			"Headphone Jack", "HPOUTR",
+			"Headphone Jack", "HPOUTL",
+			"Int Spk", "ROP",
+			"Int Spk", "RON",
+			"Int Spk", "LOP",
+			"Int Spk", "LON",
+			"IN1R", "Mic Jack",
+			"DMICDAT", "Int Mic";
+
+		nvidia,i2s-controller = <&tegra_i2s1>;
+		nvidia,audio-codec = <&wm8903>;
+
+		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
+		nvidia,headset;
+
+		clocks = <&tegra_car TEGRA30_CLK_PLL_A>,
+			 <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
+			 <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+
+		assigned-clocks = <&tegra_car TEGRA30_CLK_EXTERN1>,
+				  <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+
+		assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
+					 <&tegra_car TEGRA30_CLK_EXTERN1>;
+	};
+
+	thermal-zones {
+		/*
+		 * NCT72 has two sensors:
+		 *
+		 *	0: internal that monitors ambient/skin temperature
+		 *	1: external that is connected to the CPU's diode
+		 *
+		 * Ideally we should use userspace thermal governor,
+		 * but it's a much more complex solution.  The "skin"
+		 * zone exists as a simpler solution which prevents
+		 * Chagall from getting too hot from a user's tactile
+		 * perspective. The CPU zone is intended to protect
+		 * silicon from damage.
+		 */
+
+		skin-thermal {
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <5000>; /* milliseconds */
+
+			thermal-sensors = <&nct72 0>;
+
+			trips {
+				trip0: skin-alert {
+					/* throttle at 57C until temperature drops to 56.8C */
+					temperature = <57000>;
+					hysteresis = <200>;
+					type = "passive";
+				};
+
+				trip1: skin-crit {
+					/* shut down at 65C */
+					temperature = <65000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&trip0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&actmon THERMAL_NO_LIMIT
+								  THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu-thermal {
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <5000>; /* milliseconds */
+
+			thermal-sensors = <&nct72 1>;
+
+			trips {
+				trip2: cpu-alert {
+					/* throttle at 85C until temperature drops to 84.8C */
+					temperature = <85000>;
+					hysteresis = <200>;
+					type = "passive";
+				};
+
+				trip3: cpu-crit {
+					/* shut down at 90C */
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map1 {
+					trip = <&trip2>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&actmon THERMAL_NO_LIMIT
+								  THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+};
+
+&emc_icc_dvfs_opp_table {
+	/delete-node/ opp-625000000-1200;
+	/delete-node/ opp-625000000-1250;
+	/delete-node/ opp-667000000-1200;
+	/delete-node/ opp-750000000-1300;
+	/delete-node/ opp-800000000-1300;
+	/delete-node/ opp-900000000-1350;
+};
+
+&emc_bw_dfs_opp_table {
+	/delete-node/ opp-625000000;
+	/delete-node/ opp-667000000;
+	/delete-node/ opp-750000000;
+	/delete-node/ opp-800000000;
+	/delete-node/ opp-900000000;
+};
diff --git a/dts/src/arm/tegra30-peripherals-opp.dtsi b/dts/src/arm/tegra30-peripherals-opp.dtsi
index 2c97803197..d100a1a8b7 100644
--- a/dts/src/arm/tegra30-peripherals-opp.dtsi
+++ b/dts/src/arm/tegra30-peripherals-opp.dtsi
@@ -1,386 +1,1628 @@
 // SPDX-License-Identifier: GPL-2.0
 
 / {
-	emc_icc_dvfs_opp_table: emc-dvfs-opp-table {
+	core_opp_table: opp-table-core {
 		compatible = "operating-points-v2";
+		opp-shared;
 
-		opp@12750000,950 {
+		core_opp_950: opp-950000 {
+			opp-microvolt = <950000 950000 1350000>;
+			opp-level = <950000>;
+		};
+
+		core_opp_1000: opp-1000000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-level = <1000000>;
+		};
+
+		core_opp_1050: opp-1050000 {
+			opp-microvolt = <1050000 1050000 1350000>;
+			opp-level = <1050000>;
+		};
+
+		core_opp_1100: opp-1100000 {
+			opp-microvolt = <1100000 1100000 1350000>;
+			opp-level = <1100000>;
+		};
+
+		core_opp_1150: opp-1150000 {
+			opp-microvolt = <1150000 1150000 1350000>;
+			opp-level = <1150000>;
+		};
+
+		core_opp_1200: opp-1200000 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-level = <1200000>;
+		};
+
+		core_opp_1250: opp-1250000 {
+			opp-microvolt = <1250000 1250000 1350000>;
+			opp-level = <1250000>;
+		};
+
+		core_opp_1300: opp-1300000 {
+			opp-microvolt = <1300000 1300000 1350000>;
+			opp-level = <1300000>;
+		};
+
+		core_opp_1350: opp-1350000 {
+			opp-microvolt = <1350000 1350000 1350000>;
+			opp-level = <1350000>;
+		};
+	};
+
+	emc_icc_dvfs_opp_table: opp-table-emc {
+		compatible = "operating-points-v2";
+
+		opp-12750000-950 {
 			opp-microvolt = <950000 950000 1350000>;
 			opp-hz = /bits/ 64 <12750000>;
 			opp-supported-hw = <0x0006>;
+			required-opps = <&core_opp_950>;
 		};
 
-		opp@12750000,1000 {
+		opp-12750000-1000 {
 			opp-microvolt = <1000000 1000000 1350000>;
 			opp-hz = /bits/ 64 <12750000>;
 			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1000>;
 		};
 
-		opp@12750000,1250 {
+		opp-12750000-1250 {
 			opp-microvolt = <1250000 1250000 1350000>;
 			opp-hz = /bits/ 64 <12750000>;
 			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1250>;
 		};
 
-		opp@25500000,950 {
+		opp-25500000-950 {
 			opp-microvolt = <950000 950000 1350000>;
 			opp-hz = /bits/ 64 <25500000>;
 			opp-supported-hw = <0x0006>;
+			required-opps = <&core_opp_950>;
 		};
 
-		opp@25500000,1000 {
+		opp-25500000-1000 {
 			opp-microvolt = <1000000 1000000 1350000>;
 			opp-hz = /bits/ 64 <25500000>;
 			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1000>;
 		};
 
-		opp@25500000,1250 {
+		opp-25500000-1250 {
 			opp-microvolt = <1250000 1250000 1350000>;
 			opp-hz = /bits/ 64 <25500000>;
 			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1250>;
 		};
 
-		opp@27000000,950 {
+		opp-27000000-950 {
 			opp-microvolt = <950000 950000 1350000>;
 			opp-hz = /bits/ 64 <27000000>;
 			opp-supported-hw = <0x0006>;
+			required-opps = <&core_opp_950>;
 		};
 
-		opp@27000000,1000 {
+		opp-27000000-1000 {
 			opp-microvolt = <1000000 1000000 1350000>;
 			opp-hz = /bits/ 64 <27000000>;
 			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1000>;
 		};
 
-		opp@27000000,1250 {
+		opp-27000000-1250 {
 			opp-microvolt = <1250000 1250000 1350000>;
 			opp-hz = /bits/ 64 <27000000>;
 			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1250>;
 		};
 
-		opp@51000000,950 {
+		opp-51000000-950 {
 			opp-microvolt = <950000 950000 1350000>;
 			opp-hz = /bits/ 64 <51000000>;
 			opp-supported-hw = <0x0006>;
+			required-opps = <&core_opp_950>;
 		};
 
-		opp@51000000,1000 {
+		opp-51000000-1000 {
 			opp-microvolt = <1000000 1000000 1350000>;
 			opp-hz = /bits/ 64 <51000000>;
 			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1000>;
 		};
 
-		opp@51000000,1250 {
+		opp-51000000-1250 {
 			opp-microvolt = <1250000 1250000 1350000>;
 			opp-hz = /bits/ 64 <51000000>;
 			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1250>;
 		};
 
-		opp@54000000,950 {
+		opp-54000000-950 {
 			opp-microvolt = <950000 950000 1350000>;
 			opp-hz = /bits/ 64 <54000000>;
 			opp-supported-hw = <0x0006>;
+			required-opps = <&core_opp_950>;
 		};
 
-		opp@54000000,1000 {
+		opp-54000000-1000 {
 			opp-microvolt = <1000000 1000000 1350000>;
 			opp-hz = /bits/ 64 <54000000>;
 			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1000>;
 		};
 
-		opp@54000000,1250 {
+		opp-54000000-1250 {
 			opp-microvolt = <1250000 1250000 1350000>;
 			opp-hz = /bits/ 64 <54000000>;
 			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1250>;
 		};
 
-		opp@102000000,950 {
+		opp-102000000-950 {
 			opp-microvolt = <950000 950000 1350000>;
 			opp-hz = /bits/ 64 <102000000>;
 			opp-supported-hw = <0x0006>;
+			required-opps = <&core_opp_950>;
 		};
 
-		opp@102000000,1000 {
+		opp-102000000-1000 {
 			opp-microvolt = <1000000 1000000 1350000>;
 			opp-hz = /bits/ 64 <102000000>;
 			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1000>;
 		};
 
-		opp@102000000,1250 {
+		opp-102000000-1250 {
 			opp-microvolt = <1250000 1250000 1350000>;
 			opp-hz = /bits/ 64 <102000000>;
 			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1250>;
 		};
 
-		opp@108000000,1000 {
+		opp-108000000-1000 {
 			opp-microvolt = <1000000 1000000 1350000>;
 			opp-hz = /bits/ 64 <108000000>;
 			opp-supported-hw = <0x0007>;
+			required-opps = <&core_opp_1000>;
 		};
 
-		opp@108000000,1250 {
+		opp-108000000-1250 {
 			opp-microvolt = <1250000 1250000 1350000>;
 			opp-hz = /bits/ 64 <108000000>;
 			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1250>;
 		};
 
-		opp@204000000,1000 {
+		opp-204000000-1000 {
 			opp-microvolt = <1000000 1000000 1350000>;
 			opp-hz = /bits/ 64 <204000000>;
 			opp-supported-hw = <0x0007>;
+			required-opps = <&core_opp_1000>;
 			opp-suspend;
 		};
 
-		opp@204000000,1250 {
+		opp-204000000-1250 {
 			opp-microvolt = <1250000 1250000 1350000>;
 			opp-hz = /bits/ 64 <204000000>;
 			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1250>;
 			opp-suspend;
 		};
 
-		opp@333500000,1000 {
+		opp-333500000-1000 {
 			opp-microvolt = <1000000 1000000 1350000>;
 			opp-hz = /bits/ 64 <333500000>;
 			opp-supported-hw = <0x0006>;
+			required-opps = <&core_opp_1000>;
 		};
 
-		opp@333500000,1200 {
+		opp-333500000-1200 {
 			opp-microvolt = <1200000 1200000 1350000>;
 			opp-hz = /bits/ 64 <333500000>;
 			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1200>;
 		};
 
-		opp@333500000,1250 {
+		opp-333500000-1250 {
 			opp-microvolt = <1250000 1250000 1350000>;
 			opp-hz = /bits/ 64 <333500000>;
 			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1250>;
 		};
 
-		opp@375000000,1000 {
+		opp-375000000-1000 {
 			opp-microvolt = <1000000 1000000 1350000>;
 			opp-hz = /bits/ 64 <375000000>;
 			opp-supported-hw = <0x0006>;
+			required-opps = <&core_opp_1000>;
 		};
 
-		opp@375000000,1200 {
+		opp-375000000-1200 {
 			opp-microvolt = <1200000 1200000 1350000>;
 			opp-hz = /bits/ 64 <375000000>;
 			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1200>;
 		};
 
-		opp@375000000,1250 {
+		opp-375000000-1250 {
 			opp-microvolt = <1250000 1250000 1350000>;
 			opp-hz = /bits/ 64 <375000000>;
 			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1250>;
 		};
 
-		opp@400000000,1000 {
+		opp-400000000-1000 {
 			opp-microvolt = <1000000 1000000 1350000>;
 			opp-hz = /bits/ 64 <400000000>;
 			opp-supported-hw = <0x0006>;
+			required-opps = <&core_opp_1000>;
 		};
 
-		opp@400000000,1200 {
+		opp-400000000-1200 {
 			opp-microvolt = <1200000 1200000 1350000>;
 			opp-hz = /bits/ 64 <400000000>;
 			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1200>;
 		};
 
-		opp@400000000,1250 {
+		opp-400000000-1250 {
 			opp-microvolt = <1250000 1250000 1350000>;
 			opp-hz = /bits/ 64 <400000000>;
 			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1250>;
 		};
 
-		opp@416000000,1200 {
+		opp-416000000-1200 {
 			opp-microvolt = <1200000 1200000 1350000>;
 			opp-hz = /bits/ 64 <416000000>;
 			opp-supported-hw = <0x0007>;
+			required-opps = <&core_opp_1200>;
 		};
 
-		opp@416000000,1250 {
+		opp-416000000-1250 {
 			opp-microvolt = <1250000 1250000 1350000>;
 			opp-hz = /bits/ 64 <416000000>;
 			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1250>;
 		};
 
-		opp@450000000,1200 {
+		opp-450000000-1200 {
 			opp-microvolt = <1200000 1200000 1350000>;
 			opp-hz = /bits/ 64 <450000000>;
 			opp-supported-hw = <0x0007>;
+			required-opps = <&core_opp_1200>;
 		};
 
-		opp@450000000,1250 {
+		opp-450000000-1250 {
 			opp-microvolt = <1250000 1250000 1350000>;
 			opp-hz = /bits/ 64 <450000000>;
 			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1250>;
+		};
+
+		opp-500000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <500000000>;
+			opp-supported-hw = <0x0007>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-500000000-1250 {
+			opp-microvolt = <1250000 1250000 1350000>;
+			opp-hz = /bits/ 64 <500000000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1250>;
 		};
 
-		opp@533000000,1200 {
+		opp-533000000-1200 {
 			opp-microvolt = <1200000 1200000 1350000>;
 			opp-hz = /bits/ 64 <533000000>;
 			opp-supported-hw = <0x0007>;
+			required-opps = <&core_opp_1200>;
 		};
 
-		opp@533000000,1250 {
+		opp-533000000-1250 {
 			opp-microvolt = <1250000 1250000 1350000>;
 			opp-hz = /bits/ 64 <533000000>;
 			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1250>;
 		};
 
-		opp@625000000,1200 {
+		opp-625000000-1200 {
 			opp-microvolt = <1200000 1200000 1350000>;
 			opp-hz = /bits/ 64 <625000000>;
 			opp-supported-hw = <0x0006>;
+			required-opps = <&core_opp_1200>;
 		};
 
-		opp@625000000,1250 {
+		opp-625000000-1250 {
 			opp-microvolt = <1250000 1250000 1350000>;
 			opp-hz = /bits/ 64 <625000000>;
 			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1250>;
 		};
 
-		opp@667000000,1200 {
+		opp-667000000-1200 {
 			opp-microvolt = <1200000 1200000 1350000>;
 			opp-hz = /bits/ 64 <667000000>;
 			opp-supported-hw = <0x0006>;
+			required-opps = <&core_opp_1200>;
 		};
 
-		opp@750000000,1300 {
+		opp-750000000-1300 {
 			opp-microvolt = <1300000 1300000 1350000>;
 			opp-hz = /bits/ 64 <750000000>;
 			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1300>;
 		};
 
-		opp@800000000,1300 {
+		opp-800000000-1300 {
 			opp-microvolt = <1300000 1300000 1350000>;
 			opp-hz = /bits/ 64 <800000000>;
 			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1300>;
 		};
 
-		opp@900000000,1350 {
+		opp-900000000-1350 {
 			opp-microvolt = <1350000 1350000 1350000>;
 			opp-hz = /bits/ 64 <900000000>;
 			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1350>;
 		};
 	};
 
-	emc_bw_dfs_opp_table: emc-bandwidth-opp-table {
+	emc_bw_dfs_opp_table: opp-table-actmon {
 		compatible = "operating-points-v2";
 
-		opp@12750000 {
+		opp-12750000 {
 			opp-hz = /bits/ 64 <12750000>;
 			opp-supported-hw = <0x000F>;
 			opp-peak-kBps = <102000>;
 		};
 
-		opp@25500000 {
+		opp-25500000 {
 			opp-hz = /bits/ 64 <25500000>;
 			opp-supported-hw = <0x000F>;
 			opp-peak-kBps = <204000>;
 		};
 
-		opp@27000000 {
+		opp-27000000 {
 			opp-hz = /bits/ 64 <27000000>;
 			opp-supported-hw = <0x000F>;
 			opp-peak-kBps = <216000>;
 		};
 
-		opp@51000000 {
+		opp-51000000 {
 			opp-hz = /bits/ 64 <51000000>;
 			opp-supported-hw = <0x000F>;
 			opp-peak-kBps = <408000>;
 		};
 
-		opp@54000000 {
+		opp-54000000 {
 			opp-hz = /bits/ 64 <54000000>;
 			opp-supported-hw = <0x000F>;
 			opp-peak-kBps = <432000>;
 		};
 
-		opp@102000000 {
+		opp-102000000 {
 			opp-hz = /bits/ 64 <102000000>;
 			opp-supported-hw = <0x000F>;
 			opp-peak-kBps = <816000>;
 		};
 
-		opp@108000000 {
+		opp-108000000 {
 			opp-hz = /bits/ 64 <108000000>;
 			opp-supported-hw = <0x000F>;
 			opp-peak-kBps = <864000>;
 		};
 
-		opp@204000000 {
+		opp-204000000 {
 			opp-hz = /bits/ 64 <204000000>;
 			opp-supported-hw = <0x000F>;
 			opp-peak-kBps = <1632000>;
 			opp-suspend;
 		};
 
-		opp@333500000 {
+		opp-333500000 {
 			opp-hz = /bits/ 64 <333500000>;
 			opp-supported-hw = <0x000F>;
 			opp-peak-kBps = <2668000>;
 		};
 
-		opp@375000000 {
+		opp-375000000 {
 			opp-hz = /bits/ 64 <375000000>;
 			opp-supported-hw = <0x000F>;
 			opp-peak-kBps = <3000000>;
 		};
 
-		opp@400000000 {
+		opp-400000000 {
 			opp-hz = /bits/ 64 <400000000>;
 			opp-supported-hw = <0x000F>;
 			opp-peak-kBps = <3200000>;
 		};
 
-		opp@416000000 {
+		opp-416000000 {
 			opp-hz = /bits/ 64 <416000000>;
 			opp-supported-hw = <0x000F>;
 			opp-peak-kBps = <3328000>;
 		};
 
-		opp@450000000 {
+		opp-450000000 {
 			opp-hz = /bits/ 64 <450000000>;
 			opp-supported-hw = <0x000F>;
 			opp-peak-kBps = <3600000>;
 		};
 
-		opp@533000000 {
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-supported-hw = <0x000F>;
+			opp-peak-kBps = <4000000>;
+		};
+
+		opp-533000000 {
 			opp-hz = /bits/ 64 <533000000>;
 			opp-supported-hw = <0x000F>;
 			opp-peak-kBps = <4264000>;
 		};
 
-		opp@625000000 {
+		opp-625000000 {
 			opp-hz = /bits/ 64 <625000000>;
 			opp-supported-hw = <0x000E>;
 			opp-peak-kBps = <5000000>;
 		};
 
-		opp@667000000 {
+		opp-667000000 {
 			opp-hz = /bits/ 64 <667000000>;
 			opp-supported-hw = <0x0006>;
 			opp-peak-kBps = <5336000>;
 		};
 
-		opp@750000000 {
+		opp-750000000 {
 			opp-hz = /bits/ 64 <750000000>;
 			opp-supported-hw = <0x0004>;
 			opp-peak-kBps = <6000000>;
 		};
 
-		opp@800000000 {
+		opp-800000000 {
 			opp-hz = /bits/ 64 <800000000>;
 			opp-supported-hw = <0x0004>;
 			opp-peak-kBps = <6400000>;
 		};
 
-		opp@900000000 {
+		opp-900000000 {
 			opp-hz = /bits/ 64 <900000000>;
 			opp-supported-hw = <0x0004>;
 			opp-peak-kBps = <7200000>;
 		};
 	};
+
+	pcie_dvfs_opp_table: opp-table-pcie {
+		compatible = "operating-points-v2";
+
+		opp-250000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <250000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+	};
+
+	host1x_dvfs_opp_table: opp-table-host1x {
+		compatible = "operating-points-v2";
+
+		opp-152000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <152000000>;
+			opp-supported-hw = <0x0007>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-188000000-1050 {
+			opp-microvolt = <1050000 1050000 1350000>;
+			opp-hz = /bits/ 64 <188000000>;
+			opp-supported-hw = <0x0007>;
+			required-opps = <&core_opp_1050>;
+		};
+
+		opp-222000000-1100 {
+			opp-microvolt = <1100000 1100000 1350000>;
+			opp-hz = /bits/ 64 <222000000>;
+			opp-supported-hw = <0x0007>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-242000000-1250 {
+			opp-microvolt = <1250000 1250000 1350000>;
+			opp-hz = /bits/ 64 <242000000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1250>;
+		};
+
+		opp-254000000-1150 {
+			opp-microvolt = <1150000 1150000 1350000>;
+			opp-hz = /bits/ 64 <254000000>;
+			opp-supported-hw = <0x0007>;
+			required-opps = <&core_opp_1150>;
+		};
+
+		opp-267000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <267000000>;
+			opp-supported-hw = <0x0007>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-300000000-1350 {
+			opp-microvolt = <1350000 1350000 1350000>;
+			opp-hz = /bits/ 64 <300000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1350>;
+		};
+	};
+
+	mpe_dvfs_opp_table: opp-table-mpe {
+		compatible = "operating-points-v2";
+
+		opp-234000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <234000000>;
+			opp-supported-hw = <0x0003>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-247000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <247000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-285000000-1050 {
+			opp-microvolt = <1050000 1050000 1350000>;
+			opp-hz = /bits/ 64 <285000000>;
+			opp-supported-hw = <0x0003>;
+			required-opps = <&core_opp_1050>;
+		};
+
+		opp-304000000-1050 {
+			opp-microvolt = <1050000 1050000 1350000>;
+			opp-hz = /bits/ 64 <304000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1050>;
+		};
+
+		opp-332000000-1100 {
+			opp-microvolt = <1100000 1100000 1350000>;
+			opp-hz = /bits/ 64 <332000000>;
+			opp-supported-hw = <0x0003>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-361000000-1100 {
+			opp-microvolt = <1100000 1100000 1350000>;
+			opp-hz = /bits/ 64 <361000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-380000000-1150 {
+			opp-microvolt = <1150000 1150000 1350000>;
+			opp-hz = /bits/ 64 <380000000>;
+			opp-supported-hw = <0x0003>;
+			required-opps = <&core_opp_1150>;
+		};
+
+		opp-408000000-1150 {
+			opp-microvolt = <1150000 1150000 1350000>;
+			opp-hz = /bits/ 64 <408000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1150>;
+		};
+
+		opp-416000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <416000000>;
+			opp-supported-hw = <0x0003>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-446000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <446000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-484000000-1250 {
+			opp-microvolt = <1250000 1250000 1350000>;
+			opp-hz = /bits/ 64 <484000000>;
+			opp-supported-hw = <0x000C>;
+			required-opps = <&core_opp_1250>;
+		};
+
+		opp-520000000-1300 {
+			opp-microvolt = <1300000 1300000 1350000>;
+			opp-hz = /bits/ 64 <520000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1300>;
+		};
+
+		opp-600000000-1350 {
+			opp-microvolt = <1350000 1350000 1350000>;
+			opp-hz = /bits/ 64 <600000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1350>;
+		};
+	};
+
+	vi_dvfs_opp_table: opp-table-vi {
+		compatible = "operating-points-v2";
+
+		opp-216000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <216000000>;
+			opp-supported-hw = <0x0003>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-219000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <219000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-267000000-1050 {
+			opp-microvolt = <1050000 1050000 1350000>;
+			opp-hz = /bits/ 64 <267000000>;
+			opp-supported-hw = <0x0006>;
+			required-opps = <&core_opp_1050>;
+		};
+
+		opp-285000000-1050 {
+			opp-microvolt = <1050000 1050000 1350000>;
+			opp-hz = /bits/ 64 <285000000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1050>;
+		};
+
+		opp-300000000-1100 {
+			opp-microvolt = <1100000 1100000 1350000>;
+			opp-hz = /bits/ 64 <300000000>;
+			opp-supported-hw = <0x0007>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-371000000-1150 {
+			opp-microvolt = <1150000 1150000 1350000>;
+			opp-hz = /bits/ 64 <371000000>;
+			opp-supported-hw = <0x0006>;
+			required-opps = <&core_opp_1150>;
+		};
+
+		opp-409000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <409000000>;
+			opp-supported-hw = <0x0006>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-425000000-1250 {
+			opp-microvolt = <1250000 1250000 1350000>;
+			opp-hz = /bits/ 64 <425000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1250>;
+		};
+
+		opp-470000000-1250 {
+			opp-microvolt = <1250000 1250000 1350000>;
+			opp-hz = /bits/ 64 <470000000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1250>;
+		};
+	};
+
+	epp_dvfs_opp_table: opp-table-epp {
+		compatible = "operating-points-v2";
+
+		opp-267000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <267000000>;
+			opp-supported-hw = <0x0007>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-285000000-1050 {
+			opp-microvolt = <1050000 1050000 1350000>;
+			opp-hz = /bits/ 64 <285000000>;
+			opp-supported-hw = <0x0003>;
+			required-opps = <&core_opp_1050>;
+		};
+
+		opp-304000000-1050 {
+			opp-microvolt = <1050000 1050000 1350000>;
+			opp-hz = /bits/ 64 <304000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1050>;
+		};
+
+		opp-332000000-1100 {
+			opp-microvolt = <1100000 1100000 1350000>;
+			opp-hz = /bits/ 64 <332000000>;
+			opp-supported-hw = <0x0003>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-361000000-1100 {
+			opp-microvolt = <1100000 1100000 1350000>;
+			opp-hz = /bits/ 64 <361000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-380000000-1150 {
+			opp-microvolt = <1150000 1150000 1350000>;
+			opp-hz = /bits/ 64 <380000000>;
+			opp-supported-hw = <0x0003>;
+			required-opps = <&core_opp_1150>;
+		};
+
+		opp-408000000-1150 {
+			opp-microvolt = <1150000 1150000 1350000>;
+			opp-hz = /bits/ 64 <408000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1150>;
+		};
+
+		opp-416000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <416000000>;
+			opp-supported-hw = <0x0003>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-446000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <446000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-484000000-1250 {
+			opp-microvolt = <1250000 1250000 1350000>;
+			opp-hz = /bits/ 64 <484000000>;
+			opp-supported-hw = <0x000C>;
+			required-opps = <&core_opp_1250>;
+		};
+
+		opp-520000000-1300 {
+			opp-microvolt = <1300000 1300000 1350000>;
+			opp-hz = /bits/ 64 <520000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1300>;
+		};
+
+		opp-600000000-1350 {
+			opp-microvolt = <1350000 1350000 1350000>;
+			opp-hz = /bits/ 64 <600000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1350>;
+		};
+	};
+
+	gr2d_dvfs_opp_table: opp-table-gr2d {
+		compatible = "operating-points-v2";
+
+		opp-267000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <267000000>;
+			opp-supported-hw = <0x0007>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-285000000-1050 {
+			opp-microvolt = <1050000 1050000 1350000>;
+			opp-hz = /bits/ 64 <285000000>;
+			opp-supported-hw = <0x0003>;
+			required-opps = <&core_opp_1050>;
+		};
+
+		opp-304000000-1050 {
+			opp-microvolt = <1050000 1050000 1350000>;
+			opp-hz = /bits/ 64 <304000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1050>;
+		};
+
+		opp-332000000-1100 {
+			opp-microvolt = <1100000 1100000 1350000>;
+			opp-hz = /bits/ 64 <332000000>;
+			opp-supported-hw = <0x0003>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-361000000-1100 {
+			opp-microvolt = <1100000 1100000 1350000>;
+			opp-hz = /bits/ 64 <361000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-380000000-1150 {
+			opp-microvolt = <1150000 1150000 1350000>;
+			opp-hz = /bits/ 64 <380000000>;
+			opp-supported-hw = <0x0003>;
+			required-opps = <&core_opp_1150>;
+		};
+
+		opp-408000000-1150 {
+			opp-microvolt = <1150000 1150000 1350000>;
+			opp-hz = /bits/ 64 <408000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1150>;
+		};
+
+		opp-416000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <416000000>;
+			opp-supported-hw = <0x0003>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-446000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <446000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-484000000-1250 {
+			opp-microvolt = <1250000 1250000 1350000>;
+			opp-hz = /bits/ 64 <484000000>;
+			opp-supported-hw = <0x000C>;
+			required-opps = <&core_opp_1250>;
+		};
+
+		opp-520000000-1300 {
+			opp-microvolt = <1300000 1300000 1350000>;
+			opp-hz = /bits/ 64 <520000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1300>;
+		};
+
+		opp-600000000-1350 {
+			opp-microvolt = <1350000 1350000 1350000>;
+			opp-hz = /bits/ 64 <600000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1350>;
+		};
+	};
+
+	gr3d_dvfs_opp_table: opp-table-gr3d {
+		compatible = "operating-points-v2";
+
+		opp-234000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <234000000>;
+			opp-supported-hw = <0x0003>;
+			required-opps = <&core_opp_1000>, <&core_opp_1000>;
+		};
+
+		opp-247000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <247000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1000>, <&core_opp_1000>;
+		};
+
+		opp-285000000-1050 {
+			opp-microvolt = <1050000 1050000 1350000>;
+			opp-hz = /bits/ 64 <285000000>;
+			opp-supported-hw = <0x0003>;
+			required-opps = <&core_opp_1050>, <&core_opp_1050>;
+		};
+
+		opp-304000000-1050 {
+			opp-microvolt = <1050000 1050000 1350000>;
+			opp-hz = /bits/ 64 <304000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1050>, <&core_opp_1050>;
+		};
+
+		opp-332000000-1100 {
+			opp-microvolt = <1100000 1100000 1350000>;
+			opp-hz = /bits/ 64 <332000000>;
+			opp-supported-hw = <0x0003>;
+			required-opps = <&core_opp_1100>, <&core_opp_1100>;
+		};
+
+		opp-361000000-1100 {
+			opp-microvolt = <1100000 1100000 1350000>;
+			opp-hz = /bits/ 64 <361000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1100>, <&core_opp_1100>;
+		};
+
+		opp-380000000-1150 {
+			opp-microvolt = <1150000 1150000 1350000>;
+			opp-hz = /bits/ 64 <380000000>;
+			opp-supported-hw = <0x0003>;
+			required-opps = <&core_opp_1150>, <&core_opp_1150>;
+		};
+
+		opp-408000000-1150 {
+			opp-microvolt = <1150000 1150000 1350000>;
+			opp-hz = /bits/ 64 <408000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1150>, <&core_opp_1150>;
+		};
+
+		opp-416000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <416000000>;
+			opp-supported-hw = <0x0003>;
+			required-opps = <&core_opp_1200>, <&core_opp_1200>;
+		};
+
+		opp-446000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <446000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1200>, <&core_opp_1200>;
+		};
+
+		opp-484000000-1250 {
+			opp-microvolt = <1250000 1250000 1350000>;
+			opp-hz = /bits/ 64 <484000000>;
+			opp-supported-hw = <0x000C>;
+			required-opps = <&core_opp_1250>, <&core_opp_1250>;
+		};
+
+		opp-520000000-1300 {
+			opp-microvolt = <1300000 1300000 1350000>;
+			opp-hz = /bits/ 64 <520000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1300>, <&core_opp_1300>;
+		};
+
+		opp-600000000-1350 {
+			opp-microvolt = <1350000 1350000 1350000>;
+			opp-hz = /bits/ 64 <600000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1350>, <&core_opp_1350>;
+		};
+	};
+
+	disp1_dvfs_opp_table: opp-table-disp1 {
+		compatible = "operating-points-v2";
+
+		opp-120000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <120000000>;
+			opp-supported-hw = <0x0009>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-155000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <155000000>;
+			opp-supported-hw = <0x0006>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-190000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <190000000>;
+			opp-supported-hw = <0x0009>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-268000000-1050 {
+			opp-microvolt = <1050000 1050000 1350000>;
+			opp-hz = /bits/ 64 <268000000>;
+			opp-supported-hw = <0x0006>;
+			required-opps = <&core_opp_1050>;
+		};
+	};
+
+	disp2_dvfs_opp_table: opp-table-disp2 {
+		compatible = "operating-points-v2";
+
+		opp-120000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <120000000>;
+			opp-supported-hw = <0x0009>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-155000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <155000000>;
+			opp-supported-hw = <0x0006>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-190000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <190000000>;
+			opp-supported-hw = <0x0009>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-268000000-1050 {
+			opp-microvolt = <1050000 1050000 1350000>;
+			opp-hz = /bits/ 64 <268000000>;
+			opp-supported-hw = <0x0006>;
+			required-opps = <&core_opp_1050>;
+		};
+	};
+
+	hdmi_dvfs_opp_table: opp-table-hdmi {
+		compatible = "operating-points-v2";
+
+		opp-148500000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <148500000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+	};
+
+	tvo_dvfs_opp_table: opp-table-tvo {
+		compatible = "operating-points-v2";
+
+		opp-297000000-1050 {
+			opp-microvolt = <1050000 1050000 1350000>;
+			opp-hz = /bits/ 64 <297000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1050>;
+		};
+	};
+
+	dsia_dvfs_opp_table: opp-table-dsia {
+		compatible = "operating-points-v2";
+
+		opp-275000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <275000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+	};
+
+	dsib_dvfs_opp_table: opp-table-dsib {
+		compatible = "operating-points-v2";
+
+		opp-275000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <275000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+	};
+
+	sclk_dvfs_opp_table: opp-table-sclk {
+		compatible = "operating-points-v2";
+
+		opp-51000000-950 {
+			opp-microvolt = <950000 950000 1350000>;
+			opp-hz = /bits/ 64 <51000000>;
+			opp-supported-hw = <0x0006>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-136000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <136000000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-164000000-1050 {
+			opp-microvolt = <1050000 1050000 1350000>;
+			opp-hz = /bits/ 64 <164000000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1050>;
+		};
+
+		opp-191000000-1100 {
+			opp-microvolt = <1100000 1100000 1350000>;
+			opp-hz = /bits/ 64 <191000000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-205000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <205000000>;
+			opp-supported-hw = <0x0006>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-216000000-1150 {
+			opp-microvolt = <1150000 1150000 1350000>;
+			opp-hz = /bits/ 64 <216000000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1150>;
+		};
+
+		opp-227000000-1100 {
+			opp-microvolt = <1100000 1100000 1350000>;
+			opp-hz = /bits/ 64 <227000000>;
+			opp-supported-hw = <0x0006>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-267000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <267000000>;
+			opp-supported-hw = <0x0006>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-334000000-1250 {
+			opp-microvolt = <1250000 1250000 1350000>;
+			opp-hz = /bits/ 64 <334000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1250>;
+		};
+
+		opp-378000000-1250 {
+			opp-microvolt = <1250000 1250000 1350000>;
+			opp-hz = /bits/ 64 <378000000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1250>;
+		};
+	};
+
+	pll_c_dvfs_opp_table: opp-table-pllc {
+		compatible = "operating-points-v2";
+
+		opp-533000000-950 {
+			opp-microvolt = <950000 950000 1350000>;
+			opp-hz = /bits/ 64 <533000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-667000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <667000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-800000000-1100 {
+			opp-microvolt = <1100000 1100000 1350000>;
+			opp-hz = /bits/ 64 <800000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-1066000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <1066000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-1200000000-1350 {
+			opp-microvolt = <1350000 1350000 1350000>;
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1350>;
+		};
+	};
+
+	pll_e_dvfs_opp_table: opp-table-plle {
+		compatible = "operating-points-v2";
+
+		opp-100000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <100000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+	};
+
+	pll_m_dvfs_opp_table: opp-table-pllm {
+		compatible = "operating-points-v2";
+
+		opp-533000000-950 {
+			opp-microvolt = <950000 950000 1350000>;
+			opp-hz = /bits/ 64 <533000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-667000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <667000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-800000000-1100 {
+			opp-microvolt = <1100000 1100000 1350000>;
+			opp-hz = /bits/ 64 <800000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-1066000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <1066000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1200>;
+		};
+	};
+
+	vde_dvfs_opp_table: opp-table-vde {
+		compatible = "operating-points-v2";
+
+		opp-228000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <228000000>;
+			opp-supported-hw = <0x0003>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-247000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <247000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-275000000-1050 {
+			opp-microvolt = <1050000 1050000 1350000>;
+			opp-hz = /bits/ 64 <275000000>;
+			opp-supported-hw = <0x0003>;
+			required-opps = <&core_opp_1050>;
+		};
+
+		opp-304000000-1050 {
+			opp-microvolt = <1050000 1050000 1350000>;
+			opp-hz = /bits/ 64 <304000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1050>;
+		};
+
+		opp-332000000-1100 {
+			opp-microvolt = <1100000 1100000 1350000>;
+			opp-hz = /bits/ 64 <332000000>;
+			opp-supported-hw = <0x0003>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-352000000-1100 {
+			opp-microvolt = <1100000 1100000 1350000>;
+			opp-hz = /bits/ 64 <352000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-380000000-1150 {
+			opp-microvolt = <1150000 1150000 1350000>;
+			opp-hz = /bits/ 64 <380000000>;
+			opp-supported-hw = <0x0003>;
+			required-opps = <&core_opp_1150>;
+		};
+
+		opp-400000000-1150 {
+			opp-microvolt = <1150000 1150000 1350000>;
+			opp-hz = /bits/ 64 <400000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1150>;
+		};
+
+		opp-416000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <416000000>;
+			opp-supported-hw = <0x0003>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-437000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <437000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-484000000-1250 {
+			opp-microvolt = <1250000 1250000 1350000>;
+			opp-hz = /bits/ 64 <484000000>;
+			opp-supported-hw = <0x000C>;
+			required-opps = <&core_opp_1250>;
+		};
+
+		opp-520000000-1300 {
+			opp-microvolt = <1300000 1300000 1350000>;
+			opp-hz = /bits/ 64 <520000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1300>;
+		};
+
+		opp-600000000-1350 {
+			opp-microvolt = <1350000 1350000 1350000>;
+			opp-hz = /bits/ 64 <600000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1350>;
+		};
+	};
+
+	fuse_burn_dvfs_opp_table: opp-table-fuseburn {
+		compatible = "operating-points-v2";
+
+		opp-26000000-1150 {
+			opp-microvolt = <1150000 1150000 1350000>;
+			opp-hz = /bits/ 64 <26000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1150>;
+		};
+	};
+
+	nor_dvfs_opp_table: opp-table-nor {
+		compatible = "operating-points-v2";
+
+		opp-108000000-1250 {
+			opp-microvolt = <1250000 1250000 1350000>;
+			opp-hz = /bits/ 64 <108000000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1250>;
+		};
+
+		opp-115000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <115000000>;
+			opp-supported-hw = <0x0007>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-130000000-1050 {
+			opp-microvolt = <1050000 1050000 1350000>;
+			opp-hz = /bits/ 64 <130000000>;
+			opp-supported-hw = <0x0007>;
+			required-opps = <&core_opp_1050>;
+		};
+
+		opp-133000000-1150 {
+			opp-microvolt = <1150000 1150000 1350000>;
+			opp-hz = /bits/ 64 <133000000>;
+			opp-supported-hw = <0x0007>;
+			required-opps = <&core_opp_1150>;
+		};
+	};
+
+	pwm_dvfs_opp_table: opp-table-pwm {
+		compatible = "operating-points-v2";
+
+		opp-408000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <408000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+	};
+
+	sbc1_dvfs_opp_table: opp-table-sbc1 {
+		compatible = "operating-points-v2";
+
+		opp-52000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <52000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-60000000-1050 {
+			opp-microvolt = <1050000 1050000 1350000>;
+			opp-hz = /bits/ 64 <60000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1050>;
+		};
+
+		opp-100000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <100000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1200>;
+		};
+	};
+
+	sbc2_dvfs_opp_table: opp-table-sbc2 {
+		compatible = "operating-points-v2";
+
+		opp-52000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <52000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-60000000-1050 {
+			opp-microvolt = <1050000 1050000 1350000>;
+			opp-hz = /bits/ 64 <60000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1050>;
+		};
+
+		opp-100000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <100000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1200>;
+		};
+	};
+
+	sbc3_dvfs_opp_table: opp-table-sbc3 {
+		compatible = "operating-points-v2";
+
+		opp-52000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <52000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-60000000-1050 {
+			opp-microvolt = <1050000 1050000 1350000>;
+			opp-hz = /bits/ 64 <60000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1050>;
+		};
+
+		opp-100000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <100000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1200>;
+		};
+	};
+
+	sbc4_dvfs_opp_table: opp-table-sbc4 {
+		compatible = "operating-points-v2";
+
+		opp-52000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <52000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-60000000-1050 {
+			opp-microvolt = <1050000 1050000 1350000>;
+			opp-hz = /bits/ 64 <60000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1050>;
+		};
+
+		opp-100000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <100000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1200>;
+		};
+	};
+
+	sbc5_dvfs_opp_table: opp-table-sbc5 {
+		compatible = "operating-points-v2";
+
+		opp-52000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <52000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-60000000-1050 {
+			opp-microvolt = <1050000 1050000 1350000>;
+			opp-hz = /bits/ 64 <60000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1050>;
+		};
+
+		opp-100000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <100000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1200>;
+		};
+	};
+
+	sbc6_dvfs_opp_table: opp-table-sbc6 {
+		compatible = "operating-points-v2";
+
+		opp-52000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <52000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-60000000-1050 {
+			opp-microvolt = <1050000 1050000 1350000>;
+			opp-hz = /bits/ 64 <60000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1050>;
+		};
+
+		opp-100000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <100000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1200>;
+		};
+	};
+
+	sdmmc1_dvfs_opp_table: opp-table-sdmmc1 {
+		compatible = "operating-points-v2";
+
+		opp-104000000-950 {
+			opp-microvolt = <950000 950000 1350000>;
+			opp-hz = /bits/ 64 <104000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-208000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <208000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1200>;
+		};
+	};
+
+	sdmmc3_dvfs_opp_table: opp-table-sdmmc3 {
+		compatible = "operating-points-v2";
+
+		opp-104000000-950 {
+			opp-microvolt = <950000 950000 1350000>;
+			opp-hz = /bits/ 64 <104000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-208000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <208000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1200>;
+		};
+	};
+
+	usbd_dvfs_opp_table: opp-table-usbd {
+		compatible = "operating-points-v2";
+
+		opp-480000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <480000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+	};
+
+	usb2_dvfs_opp_table: opp-table-usb2 {
+		compatible = "operating-points-v2";
+
+		opp-480000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <480000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+	};
+
+	usb3_dvfs_opp_table: opp-table-usb3 {
+		compatible = "operating-points-v2";
+
+		opp-480000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <480000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+	};
 };
diff --git a/dts/src/arm/tegra30.dtsi b/dts/src/arm/tegra30.dtsi
index ae3df73c20..9dab8d2c15 100644
--- a/dts/src/arm/tegra30.dtsi
+++ b/dts/src/arm/tegra30.dtsi
@@ -55,6 +55,8 @@
 			 <&tegra_car 72>,
 			 <&tegra_car 74>;
 		reset-names = "pex", "afi", "pcie_x";
+		power-domains = <&pd_core>;
+		operating-points-v2 = <&pcie_dvfs_opp_table>;
 		status = "disabled";
 
 		pci@1,0 {
@@ -121,9 +123,11 @@
 		interrupt-names = "syncpt", "host1x";
 		clocks = <&tegra_car TEGRA30_CLK_HOST1X>;
 		clock-names = "host1x";
-		resets = <&tegra_car 28>;
-		reset-names = "host1x";
+		resets = <&tegra_car 28>, <&mc TEGRA30_MC_RESET_HC>;
+		reset-names = "host1x", "mc";
 		iommus = <&mc TEGRA_SWGROUP_HC>;
+		power-domains = <&pd_heg>;
+		operating-points-v2 = <&host1x_dvfs_opp_table>;
 
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -137,8 +141,12 @@
 			clocks = <&tegra_car TEGRA30_CLK_MPE>;
 			resets = <&tegra_car 60>;
 			reset-names = "mpe";
+			power-domains = <&pd_mpe>;
+			operating-points-v2 = <&mpe_dvfs_opp_table>;
 
 			iommus = <&mc TEGRA_SWGROUP_MPE>;
+
+			status = "disabled";
 		};
 
 		vi@54080000 {
@@ -148,8 +156,12 @@
 			clocks = <&tegra_car TEGRA30_CLK_VI>;
 			resets = <&tegra_car 20>;
 			reset-names = "vi";
+			power-domains = <&pd_venc>;
+			operating-points-v2 = <&vi_dvfs_opp_table>;
 
 			iommus = <&mc TEGRA_SWGROUP_VI>;
+
+			status = "disabled";
 		};
 
 		epp@540c0000 {
@@ -159,8 +171,12 @@
 			clocks = <&tegra_car TEGRA30_CLK_EPP>;
 			resets = <&tegra_car 19>;
 			reset-names = "epp";
+			power-domains = <&pd_heg>;
+			operating-points-v2 = <&epp_dvfs_opp_table>;
 
 			iommus = <&mc TEGRA_SWGROUP_EPP>;
+
+			status = "disabled";
 		};
 
 		isp@54100000 {
@@ -170,8 +186,11 @@
 			clocks = <&tegra_car TEGRA30_CLK_ISP>;
 			resets = <&tegra_car 23>;
 			reset-names = "isp";
+			power-domains = <&pd_venc>;
 
 			iommus = <&mc TEGRA_SWGROUP_ISP>;
+
+			status = "disabled";
 		};
 
 		gr2d@54140000 {
@@ -179,8 +198,10 @@
 			reg = <0x54140000 0x00040000>;
 			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&tegra_car TEGRA30_CLK_GR2D>;
-			resets = <&tegra_car 21>;
-			reset-names = "2d";
+			resets = <&tegra_car 21>, <&mc TEGRA30_MC_RESET_2D>;
+			reset-names = "2d", "mc";
+			power-domains = <&pd_heg>;
+			operating-points-v2 = <&gr2d_dvfs_opp_table>;
 
 			iommus = <&mc TEGRA_SWGROUP_G2>;
 		};
@@ -192,8 +213,13 @@
 				 <&tegra_car TEGRA30_CLK_GR3D2>;
 			clock-names = "3d", "3d2";
 			resets = <&tegra_car 24>,
-				 <&tegra_car 98>;
-			reset-names = "3d", "3d2";
+				 <&tegra_car 98>,
+				 <&mc TEGRA30_MC_RESET_3D>,
+				 <&mc TEGRA30_MC_RESET_3D2>;
+			reset-names = "3d", "3d2", "mc", "mc2";
+			power-domains = <&pd_3d0>, <&pd_3d1>;
+			power-domain-names = "3d0", "3d1";
+			operating-points-v2 = <&gr3d_dvfs_opp_table>;
 
 			iommus = <&mc TEGRA_SWGROUP_NV>,
 				 <&mc TEGRA_SWGROUP_NV2>;
@@ -208,6 +234,8 @@
 			clock-names = "dc", "parent";
 			resets = <&tegra_car 27>;
 			reset-names = "dc";
+			power-domains = <&pd_core>;
+			operating-points-v2 = <&disp1_dvfs_opp_table>;
 
 			iommus = <&mc TEGRA_SWGROUP_DC>;
 
@@ -238,6 +266,8 @@
 			clock-names = "dc", "parent";
 			resets = <&tegra_car 26>;
 			reset-names = "dc";
+			power-domains = <&pd_core>;
+			operating-points-v2 = <&disp2_dvfs_opp_table>;
 
 			iommus = <&mc TEGRA_SWGROUP_DCB>;
 
@@ -268,6 +298,8 @@
 			clock-names = "hdmi", "parent";
 			resets = <&tegra_car 51>;
 			reset-names = "hdmi";
+			power-domains = <&pd_core>;
+			operating-points-v2 = <&hdmi_dvfs_opp_table>;
 			status = "disabled";
 		};
 
@@ -276,6 +308,8 @@
 			reg = <0x542c0000 0x00040000>;
 			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&tegra_car TEGRA30_CLK_TVO>;
+			power-domains = <&pd_core>;
+			operating-points-v2 = <&tvo_dvfs_opp_table>;
 			status = "disabled";
 		};
 
@@ -287,6 +321,8 @@
 			clock-names = "dsi", "parent";
 			resets = <&tegra_car 48>;
 			reset-names = "dsi";
+			power-domains = <&pd_core>;
+			operating-points-v2 = <&dsia_dvfs_opp_table>;
 			status = "disabled";
 		};
 
@@ -298,6 +334,8 @@
 			clock-names = "dsi", "parent";
 			resets = <&tegra_car 84>;
 			reset-names = "dsi";
+			power-domains = <&pd_core>;
+			operating-points-v2 = <&dsib_dvfs_opp_table>;
 			status = "disabled";
 		};
 	};
@@ -358,6 +396,34 @@
 		reg = <0x60006000 0x1000>;
 		#clock-cells = <1>;
 		#reset-cells = <1>;
+
+		sclk {
+			compatible = "nvidia,tegra30-sclk";
+			clocks = <&tegra_car TEGRA30_CLK_SCLK>;
+			power-domains = <&pd_core>;
+			operating-points-v2 = <&sclk_dvfs_opp_table>;
+		};
+
+		pll-c {
+			compatible = "nvidia,tegra30-pllc";
+			clocks = <&tegra_car TEGRA30_CLK_PLL_C>;
+			power-domains = <&pd_core>;
+			operating-points-v2 = <&pll_c_dvfs_opp_table>;
+		};
+
+		pll-e {
+			compatible = "nvidia,tegra30-plle";
+			clocks = <&tegra_car TEGRA30_CLK_PLL_E>;
+			power-domains = <&pd_core>;
+			operating-points-v2 = <&pll_e_dvfs_opp_table>;
+		};
+
+		pll-m {
+			compatible = "nvidia,tegra30-pllm";
+			clocks = <&tegra_car TEGRA30_CLK_PLL_M>;
+			power-domains = <&pd_core>;
+			operating-points-v2 = <&pll_m_dvfs_opp_table>;
+		};
 	};
 
 	flow-controller@60007000 {
@@ -441,9 +507,7 @@
 		gpio-controller;
 		#interrupt-cells = <2>;
 		interrupt-controller;
-		/*
 		gpio-ranges = <&pinmux 0 0 248>;
-		*/
 	};
 
 	vde@6001a000 {
@@ -468,6 +532,8 @@
 		reset-names = "vde", "mc";
 		resets = <&tegra_car 61>, <&mc TEGRA30_MC_RESET_VDE>;
 		iommus = <&mc TEGRA_SWGROUP_VDE>;
+		power-domains = <&pd_vde>;
+		operating-points-v2 = <&vde_dvfs_opp_table>;
 	};
 
 	apbmisc@70000800 {
@@ -565,6 +631,8 @@
 		clock-names = "gmi";
 		resets = <&tegra_car 42>;
 		reset-names = "gmi";
+		power-domains = <&pd_core>;
+		operating-points-v2 = <&nor_dvfs_opp_table>;
 		status = "disabled";
 	};
 
@@ -575,6 +643,8 @@
 		clocks = <&tegra_car TEGRA30_CLK_PWM>;
 		resets = <&tegra_car 17>;
 		reset-names = "pwm";
+		power-domains = <&pd_core>;
+		operating-points-v2 = <&pwm_dvfs_opp_table>;
 		status = "disabled";
 	};
 
@@ -666,7 +736,7 @@
 	};
 
 	spi@7000d400 {
-		compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
+		compatible = "nvidia,tegra30-slink";
 		reg = <0x7000d400 0x200>;
 		interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
@@ -676,11 +746,13 @@
 		reset-names = "spi";
 		dmas = <&apbdma 15>, <&apbdma 15>;
 		dma-names = "rx", "tx";
+		power-domains = <&pd_core>;
+		operating-points-v2 = <&sbc1_dvfs_opp_table>;
 		status = "disabled";
 	};
 
 	spi@7000d600 {
-		compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
+		compatible = "nvidia,tegra30-slink";
 		reg = <0x7000d600 0x200>;
 		interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
@@ -690,11 +762,13 @@
 		reset-names = "spi";
 		dmas = <&apbdma 16>, <&apbdma 16>;
 		dma-names = "rx", "tx";
+		power-domains = <&pd_core>;
+		operating-points-v2 = <&sbc2_dvfs_opp_table>;
 		status = "disabled";
 	};
 
 	spi@7000d800 {
-		compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
+		compatible = "nvidia,tegra30-slink";
 		reg = <0x7000d800 0x200>;
 		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
@@ -704,11 +778,13 @@
 		reset-names = "spi";
 		dmas = <&apbdma 17>, <&apbdma 17>;
 		dma-names = "rx", "tx";
+		power-domains = <&pd_core>;
+		operating-points-v2 = <&sbc3_dvfs_opp_table>;
 		status = "disabled";
 	};
 
 	spi@7000da00 {
-		compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
+		compatible = "nvidia,tegra30-slink";
 		reg = <0x7000da00 0x200>;
 		interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
@@ -718,11 +794,13 @@
 		reset-names = "spi";
 		dmas = <&apbdma 18>, <&apbdma 18>;
 		dma-names = "rx", "tx";
+		power-domains = <&pd_core>;
+		operating-points-v2 = <&sbc4_dvfs_opp_table>;
 		status = "disabled";
 	};
 
 	spi@7000dc00 {
-		compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
+		compatible = "nvidia,tegra30-slink";
 		reg = <0x7000dc00 0x200>;
 		interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
@@ -732,11 +810,13 @@
 		reset-names = "spi";
 		dmas = <&apbdma 27>, <&apbdma 27>;
 		dma-names = "rx", "tx";
+		power-domains = <&pd_core>;
+		operating-points-v2 = <&sbc5_dvfs_opp_table>;
 		status = "disabled";
 	};
 
 	spi@7000de00 {
-		compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
+		compatible = "nvidia,tegra30-slink";
 		reg = <0x7000de00 0x200>;
 		interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
@@ -746,6 +826,8 @@
 		reset-names = "spi";
 		dmas = <&apbdma 28>, <&apbdma 28>;
 		dma-names = "rx", "tx";
+		power-domains = <&pd_core>;
+		operating-points-v2 = <&sbc6_dvfs_opp_table>;
 		status = "disabled";
 	};
 
@@ -765,6 +847,72 @@
 		clocks = <&tegra_car TEGRA30_CLK_PCLK>, <&clk32k_in>;
 		clock-names = "pclk", "clk32k_in";
 		#clock-cells = <1>;
+
+		pd_core: core-domain {
+			#power-domain-cells = <0>;
+			operating-points-v2 = <&core_opp_table>;
+		};
+
+		powergates {
+			pd_3d0: td {
+				clocks = <&tegra_car TEGRA30_CLK_GR3D>;
+				resets = <&mc TEGRA30_MC_RESET_3D>,
+					 <&tegra_car TEGRA30_CLK_GR3D>;
+				power-domains = <&pd_core>;
+				#power-domain-cells = <0>;
+			};
+
+			pd_3d1: td2 {
+				clocks = <&tegra_car TEGRA30_CLK_GR3D2>;
+				resets = <&mc TEGRA30_MC_RESET_3D2>,
+					 <&tegra_car TEGRA30_CLK_GR3D2>;
+				power-domains = <&pd_core>;
+				#power-domain-cells = <0>;
+			};
+
+			pd_venc: venc {
+				clocks = <&tegra_car TEGRA30_CLK_ISP>,
+					 <&tegra_car TEGRA30_CLK_VI>,
+					 <&tegra_car TEGRA30_CLK_CSI>;
+				resets = <&mc TEGRA30_MC_RESET_ISP>,
+					 <&mc TEGRA30_MC_RESET_VI>,
+					 <&tegra_car TEGRA30_CLK_ISP>,
+					 <&tegra_car 20 /* VI */>,
+					 <&tegra_car TEGRA30_CLK_CSI>;
+				power-domains = <&pd_core>;
+				#power-domain-cells = <0>;
+			};
+
+			pd_vde: vdec {
+				clocks = <&tegra_car TEGRA30_CLK_VDE>;
+				resets = <&mc TEGRA30_MC_RESET_VDE>,
+					 <&tegra_car TEGRA30_CLK_VDE>;
+				power-domains = <&pd_core>;
+				#power-domain-cells = <0>;
+			};
+
+			pd_mpe: mpe {
+				clocks = <&tegra_car TEGRA30_CLK_MPE>;
+				resets = <&mc TEGRA30_MC_RESET_MPE>,
+					 <&tegra_car TEGRA30_CLK_MPE>;
+				power-domains = <&pd_core>;
+				#power-domain-cells = <0>;
+			};
+
+			pd_heg: heg {
+				clocks = <&tegra_car TEGRA30_CLK_GR2D>,
+					 <&tegra_car TEGRA30_CLK_EPP>,
+					 <&tegra_car TEGRA30_CLK_HOST1X>;
+				resets = <&mc TEGRA30_MC_RESET_2D>,
+					 <&mc TEGRA30_MC_RESET_EPP>,
+					 <&mc TEGRA30_MC_RESET_HC>,
+					 <&tegra_car TEGRA30_CLK_GR2D>,
+					 <&tegra_car TEGRA30_CLK_EPP>,
+					 <&tegra_car TEGRA30_CLK_HOST1X>;
+				power-domains = <&pd_core>;
+				#power-domain-cells = <0>;
+			};
+		};
 	};
 
 	mc: memory-controller@7000f000 {
@@ -785,6 +933,7 @@
 		reg = <0x7000f400 0x400>;
 		interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA30_CLK_EMC>;
+		power-domains = <&pd_core>;
 
 		nvidia,memory-controller = <&mc>;
 		operating-points-v2 = <&emc_icc_dvfs_opp_table>;
@@ -799,6 +948,8 @@
 		clock-names = "fuse";
 		resets = <&tegra_car 39>;
 		reset-names = "fuse";
+		power-domains = <&pd_core>;
+		operating-points-v2 = <&fuse_burn_dvfs_opp_table>;
 	};
 
 	tsensor: tsensor@70014000 {
@@ -921,6 +1072,8 @@
 		clock-names = "sdhci";
 		resets = <&tegra_car 14>;
 		reset-names = "sdhci";
+		power-domains = <&pd_core>;
+		operating-points-v2 = <&sdmmc1_dvfs_opp_table>;
 		status = "disabled";
 	};
 
@@ -943,6 +1096,8 @@
 		clock-names = "sdhci";
 		resets = <&tegra_car 69>;
 		reset-names = "sdhci";
+		power-domains = <&pd_core>;
+		operating-points-v2 = <&sdmmc3_dvfs_opp_table>;
 		status = "disabled";
 	};
 
@@ -967,6 +1122,8 @@
 		reset-names = "usb";
 		nvidia,needs-double-reset;
 		nvidia,phy = <&phy1>;
+		power-domains = <&pd_core>;
+		operating-points-v2 = <&usbd_dvfs_opp_table>;
 		status = "disabled";
 	};
 
@@ -1008,6 +1165,8 @@
 		resets = <&tegra_car 58>;
 		reset-names = "usb";
 		nvidia,phy = <&phy2>;
+		power-domains = <&pd_core>;
+		operating-points-v2 = <&usb2_dvfs_opp_table>;
 		status = "disabled";
 	};
 
@@ -1048,6 +1207,8 @@
 		resets = <&tegra_car 59>;
 		reset-names = "usb";
 		nvidia,phy = <&phy3>;
+		power-domains = <&pd_core>;
+		operating-points-v2 = <&usb3_dvfs_opp_table>;
 		status = "disabled";
 	};
 
diff --git a/dts/src/arm/vf610-zii-dev-rev-b.dts b/dts/src/arm/vf610-zii-dev-rev-b.dts
index 043ddd7037..1f9686c33a 100644
--- a/dts/src/arm/vf610-zii-dev-rev-b.dts
+++ b/dts/src/arm/vf610-zii-dev-rev-b.dts
@@ -149,7 +149,7 @@
 						reg = <5>;
 						label = "dsa";
 						link = <&switch2port9>;
-						phy-mode = "rgmii-txid";
+						phy-mode = "1000base-x";
 
 						fixed-link {
 							speed = <1000>;
@@ -211,12 +211,14 @@
 						reg = <0>;
 						label = "lan6";
 						phy-handle = <&switch2phy0>;
+						phy-mode = "sgmii";
 					};
 
 					port@1 {
 						reg = <1>;
 						label = "lan7";
 						phy-handle = <&switch2phy1>;
+						phy-mode = "sgmii";
 					};
 
 					port@2 {
@@ -252,7 +254,7 @@
 					switch2port9: port@9 {
 						reg = <9>;
 						label = "dsa";
-						phy-mode = "rgmii-txid";
+						phy-mode = "1000base-x";
 						link = <&switch1port5
 							&switch0port5>;
 
diff --git a/dts/src/arm64/allwinner/sun50i-a64-pinebook.dts b/dts/src/arm64/allwinner/sun50i-a64-pinebook.dts
index 34e67f5f82..63571df24d 100644
--- a/dts/src/arm64/allwinner/sun50i-a64-pinebook.dts
+++ b/dts/src/arm64/allwinner/sun50i-a64-pinebook.dts
@@ -15,6 +15,7 @@
 / {
 	model = "Pinebook";
 	compatible = "pine64,pinebook", "allwinner,sun50i-a64";
+	chassis-type = "laptop";
 
 	aliases {
 		serial0 = &uart0;
diff --git a/dts/src/arm64/allwinner/sun50i-a64-pinephone.dtsi b/dts/src/arm64/allwinner/sun50i-a64-pinephone.dtsi
index 5b44a979f2..87847116ab 100644
--- a/dts/src/arm64/allwinner/sun50i-a64-pinephone.dtsi
+++ b/dts/src/arm64/allwinner/sun50i-a64-pinephone.dtsi
@@ -12,6 +12,8 @@
 #include <dt-bindings/pwm/pwm.h>
 
 / {
+	chassis-type = "handset";
+
 	aliases {
 		ethernet0 = &rtl8723cs;
 		serial0 = &uart0;
diff --git a/dts/src/arm64/allwinner/sun50i-a64-pinetab.dts b/dts/src/arm64/allwinner/sun50i-a64-pinetab.dts
index adb0b28b06..0a5607f730 100644
--- a/dts/src/arm64/allwinner/sun50i-a64-pinetab.dts
+++ b/dts/src/arm64/allwinner/sun50i-a64-pinetab.dts
@@ -16,6 +16,7 @@
 / {
 	model = "PineTab, Development Sample";
 	compatible = "pine64,pinetab", "allwinner,sun50i-a64";
+	chassis-type = "tablet";
 
 	aliases {
 		serial0 = &uart0;
diff --git a/dts/src/arm64/allwinner/sun50i-a64-teres-i.dts b/dts/src/arm64/allwinner/sun50i-a64-teres-i.dts
index aef571acd6..aff0660b89 100644
--- a/dts/src/arm64/allwinner/sun50i-a64-teres-i.dts
+++ b/dts/src/arm64/allwinner/sun50i-a64-teres-i.dts
@@ -14,6 +14,7 @@
 / {
 	model = "Olimex A64 Teres-I";
 	compatible = "olimex,a64-teres-i", "allwinner,sun50i-a64";
+	chassis-type = "laptop";
 
 	aliases {
 		serial0 = &uart0;
diff --git a/dts/src/arm64/allwinner/sun50i-a64.dtsi b/dts/src/arm64/allwinner/sun50i-a64.dtsi
index 5ba3790785..de77c87481 100644
--- a/dts/src/arm64/allwinner/sun50i-a64.dtsi
+++ b/dts/src/arm64/allwinner/sun50i-a64.dtsi
@@ -1146,8 +1146,14 @@
 
 		mbus: dram-controller@1c62000 {
 			compatible = "allwinner,sun50i-a64-mbus";
-			reg = <0x01c62000 0x1000>;
-			clocks = <&ccu 112>;
+			reg = <0x01c62000 0x1000>,
+			      <0x01c63000 0x1000>;
+			reg-names = "mbus", "dram";
+			clocks = <&ccu CLK_MBUS>,
+				 <&ccu CLK_DRAM>,
+				 <&ccu CLK_BUS_DRAM>;
+			clock-names = "mbus", "dram", "bus";
+			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			dma-ranges = <0x00000000 0x40000000 0xc0000000>;
@@ -1220,8 +1226,8 @@
 			reg-io-width = <1>;
 			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>,
-				 <&ccu CLK_HDMI>;
-			clock-names = "iahb", "isfr", "tmds";
+				 <&ccu CLK_HDMI>, <&rtc 0>;
+			clock-names = "iahb", "isfr", "tmds", "cec";
 			resets = <&ccu RST_BUS_HDMI1>;
 			reset-names = "ctrl";
 			phys = <&hdmi_phy>;
diff --git a/dts/src/arm64/allwinner/sun50i-h5.dtsi b/dts/src/arm64/allwinner/sun50i-h5.dtsi
index 9988e87ea7..a56fae761a 100644
--- a/dts/src/arm64/allwinner/sun50i-h5.dtsi
+++ b/dts/src/arm64/allwinner/sun50i-h5.dtsi
@@ -233,6 +233,10 @@
 	compatible = "allwinner,sun50i-h5-de2-clk";
 };
 
+&mbus {
+	compatible = "allwinner,sun50i-h5-mbus";
+};
+
 &mmc0 {
 	compatible = "allwinner,sun50i-h5-mmc",
 		     "allwinner,sun50i-a64-mmc";
diff --git a/dts/src/arm64/allwinner/sun50i-h6-tanix-tx6-mini.dts b/dts/src/arm64/allwinner/sun50i-h6-tanix-tx6-mini.dts
new file mode 100644
index 0000000000..08d84160d8
--- /dev/null
+++ b/dts/src/arm64/allwinner/sun50i-h6-tanix-tx6-mini.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (c) 2021 Jernej Skrabec <jernej.skrabec@gmail.com>
+
+/dts-v1/;
+
+#include "sun50i-h6-tanix.dtsi"
+
+/ {
+	model = "Tanix TX6 mini";
+	compatible = "oranth,tanix-tx6-mini", "allwinner,sun50i-h6";
+};
+
+&r_ir {
+	linux,rc-map-name = "rc-tanix-tx3mini";
+};
diff --git a/dts/src/arm64/allwinner/sun50i-h6-tanix-tx6.dts b/dts/src/arm64/allwinner/sun50i-h6-tanix-tx6.dts
index 8f2a80f128..9a38ff9b3f 100644
--- a/dts/src/arm64/allwinner/sun50i-h6-tanix-tx6.dts
+++ b/dts/src/arm64/allwinner/sun50i-h6-tanix-tx6.dts
@@ -3,145 +3,27 @@
 
 /dts-v1/;
 
-#include "sun50i-h6.dtsi"
-#include "sun50i-h6-cpu-opp.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
+#include "sun50i-h6-tanix.dtsi"
 
 / {
 	model = "Tanix TX6";
 	compatible = "oranth,tanix-tx6", "allwinner,sun50i-h6";
-
-	aliases {
-		serial0 = &uart0;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	connector {
-		compatible = "hdmi-connector";
-		ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
-		type = "a";
-
-		port {
-			hdmi_con_in: endpoint {
-				remote-endpoint = <&hdmi_out_con>;
-			};
-		};
-	};
-
-	reg_vcc1v8: regulator-vcc1v8 {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc1v8";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-	};
-
-	reg_vcc3v3: regulator-vcc3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	reg_vdd_cpu_gpu: regulator-vdd-cpu-gpu {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd-cpu-gpu";
-		regulator-min-microvolt = <1135000>;
-		regulator-max-microvolt = <1135000>;
-	};
-};
-
-&cpu0 {
-	cpu-supply = <&reg_vdd_cpu_gpu>;
-};
-
-&de {
-	status = "okay";
-};
-
-&dwc3 {
-	status = "okay";
-};
-
-&ehci0 {
-	status = "okay";
-};
-
-&ehci3 {
-	status = "okay";
-};
-
-&gpu {
-	mali-supply = <&reg_vdd_cpu_gpu>;
-	status = "okay";
-};
-
-&hdmi {
-	status = "okay";
-};
-
-&hdmi_out {
-	hdmi_out_con: endpoint {
-		remote-endpoint = <&hdmi_con_in>;
-	};
-};
-
-&mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins>;
-	vmmc-supply = <&reg_vcc3v3>;
-	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
-	bus-width = <4>;
-	status = "okay";
-};
-
-&mmc2 {
-	vmmc-supply = <&reg_vcc3v3>;
-	vqmmc-supply = <&reg_vcc1v8>;
-	bus-width = <8>;
-	non-removable;
-	cap-mmc-hw-reset;
-	mmc-hs200-1_8v;
-	status = "okay";
-};
-
-&ohci0 {
-	status = "okay";
-};
-
-&ohci3 {
-	status = "okay";
-};
-
-&pio {
-	vcc-pc-supply = <&reg_vcc1v8>;
-	vcc-pd-supply = <&reg_vcc3v3>;
-	vcc-pg-supply = <&reg_vcc1v8>;
 };
 
 &r_ir {
 	linux,rc-map-name = "rc-tanix-tx5max";
-	status = "okay";
 };
 
-&uart0 {
+&uart1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_ph_pins>;
+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	uart-has-rtscts;
 	status = "okay";
-};
 
-&usb2otg {
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usb2phy {
-	status = "okay";
-};
-
-&usb3phy {
-	status = "okay";
+	bluetooth {
+		compatible = "realtek,rtl8822cs-bt";
+		device-wake-gpios = <&r_pio 1 2 GPIO_ACTIVE_HIGH>; /* PM2 */
+		host-wake-gpios = <&r_pio 1 1 GPIO_ACTIVE_HIGH>; /* PM1 */
+		enable-gpios = <&r_pio 1 4 GPIO_ACTIVE_HIGH>; /* PM4 */
+	};
 };
diff --git a/dts/src/arm64/allwinner/sun50i-h6-tanix.dtsi b/dts/src/arm64/allwinner/sun50i-h6-tanix.dtsi
new file mode 100644
index 0000000000..edb71e4a03
--- /dev/null
+++ b/dts/src/arm64/allwinner/sun50i-h6-tanix.dtsi
@@ -0,0 +1,189 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (c) 2019 Jernej Skrabec <jernej.skrabec@siol.net>
+
+/dts-v1/;
+
+#include "sun50i-h6.dtsi"
+#include "sun50i-h6-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	/* used for FD650 LED display driver */
+	i2c {
+		compatible = "i2c-gpio";
+		sda-gpios = <&pio 7 6 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; /* PH6 */
+		scl-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; /* PH5 */
+		i2c-gpio,delay-us = <5>;
+	};
+
+	reg_vcc1v8: regulator-vcc1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	reg_vcc3v3: regulator-vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_vdd_cpu_gpu: regulator-vdd-cpu-gpu {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-cpu-gpu";
+		regulator-min-microvolt = <1135000>;
+		regulator-max-microvolt = <1135000>;
+	};
+
+	sound-spdif {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "sun50i-h6-spdif";
+
+		simple-audio-card,cpu {
+			sound-dai = <&spdif>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&spdif_out>;
+		};
+	};
+
+	spdif_out: spdif-out {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+	};
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rtc 1>;
+		clock-names = "ext_clock";
+		reset-gpios = <&r_pio 1 3 GPIO_ACTIVE_LOW>; /* PM3 */
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_vdd_cpu_gpu>;
+};
+
+&de {
+	status = "okay";
+};
+
+&dwc3 {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci3 {
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&reg_vdd_cpu_gpu>;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc1v8>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&mmc2 {
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc1v8>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	mmc-hs200-1_8v;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci3 {
+	status = "okay";
+};
+
+&pio {
+	vcc-pc-supply = <&reg_vcc1v8>;
+	vcc-pd-supply = <&reg_vcc3v3>;
+	vcc-pg-supply = <&reg_vcc1v8>;
+};
+
+&r_ir {
+	status = "okay";
+};
+
+&spdif {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
+
+&usb2otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb2phy {
+	status = "okay";
+};
+
+&usb3phy {
+	status = "okay";
+};
diff --git a/dts/src/arm64/allwinner/sun50i-h6.dtsi b/dts/src/arm64/allwinner/sun50i-h6.dtsi
index 46ed529a4d..fbe94abbb1 100644
--- a/dts/src/arm64/allwinner/sun50i-h6.dtsi
+++ b/dts/src/arm64/allwinner/sun50i-h6.dtsi
@@ -153,6 +153,15 @@
 			};
 		};
 
+		video-codec-g2@1c00000 {
+			compatible = "allwinner,sun50i-h6-vpu-g2";
+			reg = <0x01c00000 0x1000>;
+			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_VP9>, <&ccu CLK_VP9>;
+			clock-names = "bus", "mod";
+			resets = <&ccu RST_BUS_VP9>;
+		};
+
 		video-codec@1c0e000 {
 			compatible = "allwinner,sun50i-h6-video-engine";
 			reg = <0x01c0e000 0x2000>;
diff --git a/dts/src/arm64/altera/socfpga_stratix10_socdk_nand.dts b/dts/src/arm64/altera/socfpga_stratix10_socdk_nand.dts
index f9b4a39683..bbc3db42d6 100644
--- a/dts/src/arm64/altera/socfpga_stratix10_socdk_nand.dts
+++ b/dts/src/arm64/altera/socfpga_stratix10_socdk_nand.dts
@@ -119,28 +119,8 @@
 		};
 
 		partition@200000 {
-			label = "env";
-			reg = <0x200000 0x40000>;
-		};
-
-		partition@240000 {
-			label = "dtb";
-			reg = <0x240000 0x40000>;
-		};
-
-		partition@280000 {
-			label = "kernel";
-			reg = <0x280000 0x2000000>;
-		};
-
-		partition@2280000 {
-			label = "misc";
-			reg = <0x2280000 0x2000000>;
-		};
-
-		partition@4280000 {
-			label = "rootfs";
-			reg = <0x4280000 0x3bd80000>;
+			label = "root";
+			reg = <0x200000 0x3fe00000>;
 		};
 	};
 };
diff --git a/dts/src/arm64/amlogic/meson-g12-common.dtsi b/dts/src/arm64/amlogic/meson-g12-common.dtsi
index 00c6f53290..517519e6e8 100644
--- a/dts/src/arm64/amlogic/meson-g12-common.dtsi
+++ b/dts/src/arm64/amlogic/meson-g12-common.dtsi
@@ -58,7 +58,7 @@
 		secure-monitor = <&sm>;
 	};
 
-	gpu_opp_table: gpu-opp-table {
+	gpu_opp_table: opp-table-gpu {
 		compatible = "operating-points-v2";
 
 		opp-124999998 {
@@ -159,61 +159,6 @@
 			status = "disabled";
 		};
 
-		thermal-zones {
-			cpu_thermal: cpu-thermal {
-				polling-delay = <1000>;
-				polling-delay-passive = <100>;
-				thermal-sensors = <&cpu_temp>;
-
-				trips {
-					cpu_passive: cpu-passive {
-						temperature = <85000>; /* millicelsius */
-						hysteresis = <2000>; /* millicelsius */
-						type = "passive";
-					};
-
-					cpu_hot: cpu-hot {
-						temperature = <95000>; /* millicelsius */
-						hysteresis = <2000>; /* millicelsius */
-						type = "hot";
-					};
-
-					cpu_critical: cpu-critical {
-						temperature = <110000>; /* millicelsius */
-						hysteresis = <2000>; /* millicelsius */
-						type = "critical";
-					};
-				};
-			};
-
-			ddr_thermal: ddr-thermal {
-				polling-delay = <1000>;
-				polling-delay-passive = <100>;
-				thermal-sensors = <&ddr_temp>;
-
-				trips {
-					ddr_passive: ddr-passive {
-						temperature = <85000>; /* millicelsius */
-						hysteresis = <2000>; /* millicelsius */
-						type = "passive";
-					};
-
-					ddr_critical: ddr-critical {
-						temperature = <110000>; /* millicelsius */
-						hysteresis = <2000>; /* millicelsius */
-						type = "critical";
-					};
-				};
-
-				cooling-maps {
-					map {
-						trip = <&ddr_passive>;
-						cooling-device = <&mali THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-					};
-				};
-			};
-		};
-
 		ethmac: ethernet@ff3f0000 {
 			compatible = "amlogic,meson-g12a-dwmac",
 				     "snps,dwmac-3.70a",
@@ -2415,6 +2360,61 @@
 		};
 	};
 
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <100>;
+			thermal-sensors = <&cpu_temp>;
+
+			trips {
+				cpu_passive: cpu-passive {
+					temperature = <85000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+
+				cpu_hot: cpu-hot {
+					temperature = <95000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "hot";
+				};
+
+				cpu_critical: cpu-critical {
+					temperature = <110000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "critical";
+				};
+			};
+		};
+
+		ddr_thermal: ddr-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <100>;
+			thermal-sensors = <&ddr_temp>;
+
+			trips {
+				ddr_passive: ddr-passive {
+					temperature = <85000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+
+				ddr_critical: ddr-critical {
+					temperature = <110000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map {
+					trip = <&ddr_passive>;
+					cooling-device = <&mali THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <GIC_PPI 13
diff --git a/dts/src/arm64/amlogic/meson-g12b-odroid-n2.dtsi b/dts/src/arm64/amlogic/meson-g12b-odroid-n2.dtsi
index e8a00a2f88..3e968b2441 100644
--- a/dts/src/arm64/amlogic/meson-g12b-odroid-n2.dtsi
+++ b/dts/src/arm64/amlogic/meson-g12b-odroid-n2.dtsi
@@ -609,7 +609,7 @@
 	pinctrl-0 = <&nor_pins>;
 	pinctrl-names = "default";
 
-	mx25u64: spi-flash@0 {
+	mx25u64: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "mxicy,mx25u6435f", "jedec,spi-nor";
diff --git a/dts/src/arm64/amlogic/meson-gxbb-wetek.dtsi b/dts/src/arm64/amlogic/meson-gxbb-wetek.dtsi
index a350fee126..94dafb9553 100644
--- a/dts/src/arm64/amlogic/meson-gxbb-wetek.dtsi
+++ b/dts/src/arm64/amlogic/meson-gxbb-wetek.dtsi
@@ -6,6 +6,8 @@
  */
 
 #include "meson-gxbb.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
 
 / {
 	aliases {
@@ -25,8 +27,10 @@
 	leds {
 		compatible = "gpio-leds";
 
-		led-system {
-			label = "wetek-play:system-status";
+		led-power {
+			/* red in suspend or power-off */
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_POWER;
 			gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
 			panic-indicator;
@@ -64,6 +68,7 @@
 		regulator-name = "VDDIO_AO18";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
 	};
 
 	vcc_3v3: regulator-vcc_3v3 {
@@ -161,6 +166,7 @@
 	status = "okay";
 	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
 	pinctrl-names = "default";
+	hdmi-supply = <&vddio_ao18>;
 };
 
 &hdmi_tx_tmds_port {
diff --git a/dts/src/arm64/amlogic/meson-gxl-s805x-p241.dts b/dts/src/arm64/amlogic/meson-gxl-s805x-p241.dts
index eb7f5a3fef..ff906becd2 100644
--- a/dts/src/arm64/amlogic/meson-gxl-s805x-p241.dts
+++ b/dts/src/arm64/amlogic/meson-gxl-s805x-p241.dts
@@ -8,6 +8,7 @@
 /dts-v1/;
 
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/sound/meson-aiu.h>
 
 #include "meson-gxl-s805x.dtsi"
 
@@ -21,6 +22,13 @@
 		ethernet0 = &ethmac;
 	};
 
+	au2: analog-amplifier {
+		compatible = "simple-audio-amplifier";
+		sound-name-prefix = "AU2";
+		VCC-supply = <&vcc_5v>;
+		enable-gpios = <&gpio GPIOH_5 GPIO_ACTIVE_HIGH>;
+	};
+
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
@@ -84,6 +92,14 @@
 		regulator-max-microvolt = <3300000>;
 	};
 
+	vcc_5v: regulator-vcc-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+
 	emmc_pwrseq: emmc-pwrseq {
 		compatible = "mmc-pwrseq-emmc";
 		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
@@ -102,6 +118,68 @@
 		clocks = <&wifi32k>;
 		clock-names = "ext_clock";
 	};
+
+	sound {
+		compatible = "amlogic,gx-sound-card";
+		model = "GXL-P241";
+		audio-aux-devs = <&au2>;
+		audio-widgets = "Line", "Lineout";
+		audio-routing = "AU2 INL", "ACODEC LOLN",
+				"AU2 INR", "ACODEC LORN",
+				"Lineout", "AU2 OUTL",
+				"Lineout", "AU2 OUTR";
+		assigned-clocks = <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>,
+				  <&clkc CLKID_MPLL2>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+		status = "okay";
+
+		dai-link-0 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
+			dai-format = "i2s";
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
+			};
+
+			codec-1 {
+				sound-dai = <&aiu AIU_ACODEC CTRL_I2S>;
+			};
+		};
+
+		dai-link-2 {
+			sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
+
+			codec-0 {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+
+		dai-link-3 {
+			sound-dai = <&aiu AIU_ACODEC CTRL_OUT>;
+
+			codec-0 {
+				sound-dai = <&acodec>;
+			};
+		};
+	};
+};
+
+&acodec {
+	AVDD-supply = <&vddio_ao18>;
+	status = "okay";
+};
+
+&aiu {
+	status = "okay";
 };
 
 &cec_AO {
@@ -136,6 +214,7 @@
 	status = "okay";
 	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
 	pinctrl-names = "default";
+	hdmi-supply = <&vcc_5v>;
 };
 
 &hdmi_tx_tmds_port {
@@ -220,3 +299,7 @@
 	status = "okay";
 	dr_mode = "host";
 };
+
+&usb2_phy0 {
+	phy-supply = <&vcc_5v>;
+};
diff --git a/dts/src/arm64/amlogic/meson-sm1-odroid.dtsi b/dts/src/arm64/amlogic/meson-sm1-odroid.dtsi
index 5779e70cac..0bd1e98a0e 100644
--- a/dts/src/arm64/amlogic/meson-sm1-odroid.dtsi
+++ b/dts/src/arm64/amlogic/meson-sm1-odroid.dtsi
@@ -225,6 +225,20 @@
 	status = "okay";
 };
 
+&cec_AO {
+	pinctrl-0 = <&cec_ao_a_h_pins>;
+	pinctrl-names = "default";
+	status = "disabled";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&cecb_AO {
+	pinctrl-0 = <&cec_ao_b_h_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
 &clkc_audio {
 	status = "okay";
 };
diff --git a/dts/src/arm64/apple/t8103-j274.dts b/dts/src/arm64/apple/t8103-j274.dts
index 02c36301e9..2cd429efba 100644
--- a/dts/src/arm64/apple/t8103-j274.dts
+++ b/dts/src/arm64/apple/t8103-j274.dts
@@ -10,39 +10,15 @@
 /dts-v1/;
 
 #include "t8103.dtsi"
+#include "t8103-jxxx.dtsi"
 
 / {
 	compatible = "apple,j274", "apple,t8103", "apple,arm-platform";
 	model = "Apple Mac mini (M1, 2020)";
 
 	aliases {
-		serial0 = &serial0;
 		ethernet0 = &ethernet0;
 	};
-
-	chosen {
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-
-		stdout-path = "serial0";
-
-		framebuffer0: framebuffer@0 {
-			compatible = "apple,simple-framebuffer", "simple-framebuffer";
-			reg = <0 0 0 0>; /* To be filled by loader */
-			/* Format properties will be added by loader */
-			status = "disabled";
-		};
-	};
-
-	memory@800000000 {
-		device_type = "memory";
-		reg = <0x8 0 0x2 0>; /* To be filled by loader */
-	};
-};
-
-&serial0 {
-	status = "okay";
 };
 
 /*
@@ -50,9 +26,6 @@
  * on-board devices and properties that are populated by the bootloader
  * (such as MAC addresses).
  */
-&port00 {
-	bus-range = <1 1>;
-};
 
 &port01 {
 	bus-range = <2 2>;
@@ -66,3 +39,7 @@
 		local-mac-address = [00 10 18 00 00 00];
 	};
 };
+
+&i2c2 {
+	status = "okay";
+};
diff --git a/dts/src/arm64/apple/t8103-j293.dts b/dts/src/arm64/apple/t8103-j293.dts
new file mode 100644
index 0000000000..49cdf4b560
--- /dev/null
+++ b/dts/src/arm64/apple/t8103-j293.dts
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple MacBook Pro (13-inch, M1, 2020)
+ *
+ * target-type: J293
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/dts-v1/;
+
+#include "t8103.dtsi"
+#include "t8103-jxxx.dtsi"
+
+/ {
+	compatible = "apple,j293", "apple,t8103", "apple,arm-platform";
+	model = "Apple MacBook Pro (13-inch, M1, 2020)";
+};
+
+/*
+ * Remove unused PCIe ports and disable the associated DARTs.
+ */
+
+&pcie0_dart_1 {
+	status = "disabled";
+};
+
+&pcie0_dart_2 {
+	status = "disabled";
+};
+
+/delete-node/ &port01;
+/delete-node/ &port02;
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
diff --git a/dts/src/arm64/apple/t8103-j313.dts b/dts/src/arm64/apple/t8103-j313.dts
new file mode 100644
index 0000000000..b0ebb45bdb
--- /dev/null
+++ b/dts/src/arm64/apple/t8103-j313.dts
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple MacBook Air (M1, 2020)
+ *
+ * target-type: J313
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/dts-v1/;
+
+#include "t8103.dtsi"
+#include "t8103-jxxx.dtsi"
+
+/ {
+	compatible = "apple,j313", "apple,t8103", "apple,arm-platform";
+	model = "Apple MacBook Air (M1, 2020)";
+};
+
+/*
+ * Remove unused PCIe ports and disable the associated DARTs.
+ */
+
+&pcie0_dart_1 {
+	status = "disabled";
+};
+
+&pcie0_dart_2 {
+	status = "disabled";
+};
+
+/delete-node/ &port01;
+/delete-node/ &port02;
diff --git a/dts/src/arm64/apple/t8103-j456.dts b/dts/src/arm64/apple/t8103-j456.dts
new file mode 100644
index 0000000000..884fddf7d3
--- /dev/null
+++ b/dts/src/arm64/apple/t8103-j456.dts
@@ -0,0 +1,59 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iMac (24-inch, 4x USB-C, M1, 2020)
+ *
+ * target-type: J456
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/dts-v1/;
+
+#include "t8103.dtsi"
+#include "t8103-jxxx.dtsi"
+
+/ {
+	compatible = "apple,j456", "apple,t8103", "apple,arm-platform";
+	model = "Apple iMac (24-inch, 4x USB-C, M1, 2020)";
+
+	aliases {
+		ethernet0 = &ethernet0;
+	};
+};
+
+&i2c0 {
+	hpm2: usb-pd@3b {
+		compatible = "apple,cd321x";
+		reg = <0x3b>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <106 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+
+	hpm3: usb-pd@3c {
+		compatible = "apple,cd321x";
+		reg = <0x3c>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <106 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+};
+
+/*
+ * Force the bus number assignments so that we can declare some of the
+ * on-board devices and properties that are populated by the bootloader
+ * (such as MAC addresses).
+ */
+
+&port01 {
+	bus-range = <2 2>;
+};
+
+&port02 {
+	bus-range = <3 3>;
+	ethernet0: ethernet@0,0 {
+		reg = <0x30000 0x0 0x0 0x0 0x0>;
+		/* To be filled by the loader */
+		local-mac-address = [00 10 18 00 00 00];
+	};
+};
diff --git a/dts/src/arm64/apple/t8103-j457.dts b/dts/src/arm64/apple/t8103-j457.dts
new file mode 100644
index 0000000000..d7c6229316
--- /dev/null
+++ b/dts/src/arm64/apple/t8103-j457.dts
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iMac (24-inch, 2x USB-C, M1, 2020)
+ *
+ * target-type: J457
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/dts-v1/;
+
+#include "t8103.dtsi"
+#include "t8103-jxxx.dtsi"
+
+/ {
+	compatible = "apple,j457", "apple,t8103", "apple,arm-platform";
+	model = "Apple iMac (24-inch, 2x USB-C, M1, 2020)";
+
+	aliases {
+		ethernet0 = &ethernet0;
+	};
+};
+
+/*
+ * Force the bus number assignments so that we can declare some of the
+ * on-board devices and properties that are populated by the bootloader
+ * (such as MAC addresses).
+ */
+
+&port02 {
+	bus-range = <3 3>;
+	ethernet0: ethernet@0,0 {
+		reg = <0x30000 0x0 0x0 0x0 0x0>;
+		/* To be filled by the loader */
+		local-mac-address = [00 10 18 00 00 00];
+	};
+};
+
+/*
+ * Remove unused PCIe port and disable the associated DART.
+ */
+
+&pcie0_dart_1 {
+	status = "disabled";
+};
+
+/delete-node/ &port01;
diff --git a/dts/src/arm64/apple/t8103-jxxx.dtsi b/dts/src/arm64/apple/t8103-jxxx.dtsi
new file mode 100644
index 0000000000..fe2ae40fa9
--- /dev/null
+++ b/dts/src/arm64/apple/t8103-jxxx.dtsi
@@ -0,0 +1,78 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple M1 Mac mini, MacBook Air/Pro, iMac 24" (M1, 2020/2021)
+ *
+ * This file contains parts common to all Apple M1 devices using the t8103.
+ *
+ * target-type: J274, J293, J313, J456, J457
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/ {
+	aliases {
+		serial0 = &serial0;
+		serial2 = &serial2;
+		wifi0 = &wifi0;
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		stdout-path = "serial0";
+
+		framebuffer0: framebuffer@0 {
+			compatible = "apple,simple-framebuffer", "simple-framebuffer";
+			reg = <0 0 0 0>; /* To be filled by loader */
+			/* Format properties will be added by loader */
+			status = "disabled";
+		};
+	};
+
+	memory@800000000 {
+		device_type = "memory";
+		reg = <0x8 0 0x2 0>; /* To be filled by loader */
+	};
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&serial2 {
+	status = "okay";
+};
+
+&i2c0 {
+	hpm0: usb-pd@38 {
+		compatible = "apple,cd321x";
+		reg = <0x38>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <106 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+
+	hpm1: usb-pd@3f {
+		compatible = "apple,cd321x";
+		reg = <0x3f>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <106 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+};
+
+/*
+ * Force the bus number assignments so that we can declare some of the
+ * on-board devices and properties that are populated by the bootloader
+ * (such as MAC addresses).
+ */
+&port00 {
+	bus-range = <1 1>;
+	wifi0: network@0,0 {
+		reg = <0x10000 0x0 0x0 0x0 0x0>;
+		/* To be filled by the loader */
+		local-mac-address = [00 00 00 00 00 00];
+	};
+};
diff --git a/dts/src/arm64/apple/t8103-pmgr.dtsi b/dts/src/arm64/apple/t8103-pmgr.dtsi
new file mode 100644
index 0000000000..fc51bc8724
--- /dev/null
+++ b/dts/src/arm64/apple/t8103-pmgr.dtsi
@@ -0,0 +1,1138 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * PMGR Power domains for the Apple T8103 "M1" SoC
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+
+&pmgr {
+	ps_sbr: power-controller@100 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x100 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sbr";
+		apple,always-on; /* Core device */
+	};
+
+	ps_aic: power-controller@108 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x108 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aic";
+		apple,always-on; /* Core device */
+	};
+
+	ps_dwi: power-controller@110 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x110 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dwi";
+		apple,always-on; /* Core device */
+	};
+
+	ps_soc_spmi0: power-controller@118 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x118 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "soc_spmi0";
+	};
+
+	ps_soc_spmi1: power-controller@120 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x120 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "soc_spmi1";
+	};
+
+	ps_soc_spmi2: power-controller@128 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x128 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "soc_spmi2";
+	};
+
+	ps_gpio: power-controller@130 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x130 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "gpio";
+	};
+
+	ps_pms_busif: power-controller@138 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x138 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pms_busif";
+		apple,always-on; /* Core device */
+	};
+
+	ps_pms: power-controller@140 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x140 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pms";
+		apple,always-on; /* Core device */
+	};
+
+	ps_pms_fpwm0: power-controller@148 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x148 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pms_fpwm0";
+		power-domains = <&ps_pms>;
+	};
+
+	ps_pms_fpwm1: power-controller@150 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x150 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pms_fpwm1";
+		power-domains = <&ps_pms>;
+	};
+
+	ps_pms_fpwm2: power-controller@158 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x158 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pms_fpwm2";
+		power-domains = <&ps_pms>;
+	};
+
+	ps_pms_fpwm3: power-controller@160 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x160 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pms_fpwm3";
+		power-domains = <&ps_pms>;
+	};
+
+	ps_pms_fpwm4: power-controller@168 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x168 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pms_fpwm4";
+		power-domains = <&ps_pms>;
+	};
+
+	ps_soc_dpe: power-controller@170 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x170 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "soc_dpe";
+		apple,always-on; /* Core device */
+	};
+
+	ps_pmgr_soc_ocla: power-controller@178 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x178 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pmgr_soc_ocla";
+	};
+
+	ps_ispsens0: power-controller@180 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x180 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "ispsens0";
+	};
+
+	ps_ispsens1: power-controller@188 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x188 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "ispsens1";
+	};
+
+	ps_ispsens2: power-controller@190 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x190 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "ispsens2";
+	};
+
+	ps_ispsens3: power-controller@198 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x198 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "ispsens3";
+	};
+
+	ps_pcie_ref: power-controller@1a0 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_ref";
+	};
+
+	ps_aft0: power-controller@1a8 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aft0";
+	};
+
+	ps_devc0_ivdmc: power-controller@1b0 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "devc0_ivdmc";
+	};
+
+	ps_imx: power-controller@1b8 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "imx";
+		apple,always-on; /* Apple fabric, critical block */
+	};
+
+	ps_sio_busif: power-controller@1c0 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sio_busif";
+	};
+
+	ps_sio: power-controller@1c8 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sio";
+		power-domains = <&ps_sio_busif>;
+	};
+
+	ps_sio_cpu: power-controller@1d0 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sio_cpu";
+		power-domains = <&ps_sio>;
+	};
+
+	ps_fpwm0: power-controller@1d8 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "fpwm0";
+	};
+
+	ps_fpwm1: power-controller@1e0 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "fpwm1";
+	};
+
+	ps_fpwm2: power-controller@1e8 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "fpwm2";
+	};
+
+	ps_i2c0: power-controller@1f0 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c0";
+		power-domains = <&ps_sio>;
+	};
+
+	ps_i2c1: power-controller@1f8 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c1";
+		power-domains = <&ps_sio>;
+	};
+
+	ps_i2c2: power-controller@200 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x200 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c2";
+		power-domains = <&ps_sio>;
+	};
+
+	ps_i2c3: power-controller@208 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x208 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c3";
+		power-domains = <&ps_sio>;
+	};
+
+	ps_i2c4: power-controller@210 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x210 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c4";
+		power-domains = <&ps_sio>;
+	};
+
+	ps_spi_p: power-controller@218 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x218 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi_p";
+		power-domains = <&ps_sio>;
+	};
+
+	ps_uart_p: power-controller@220 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x220 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart_p";
+		power-domains = <&ps_sio>;
+	};
+
+	ps_audio_p: power-controller@228 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x228 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "audio_p";
+		power-domains = <&ps_sio>;
+	};
+
+	ps_sio_adma: power-controller@230 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x230 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sio_adma";
+		power-domains = <&ps_sio>, <&ps_pms>;
+	};
+
+	ps_aes: power-controller@238 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x238 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aes";
+		power-domains = <&ps_sio>;
+	};
+
+	ps_spi0: power-controller@240 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x240 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi0";
+		power-domains = <&ps_sio>, <&ps_spi_p>;
+	};
+
+	ps_spi1: power-controller@248 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x248 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi1";
+		power-domains = <&ps_sio>, <&ps_spi_p>;
+	};
+
+	ps_spi2: power-controller@250 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x250 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi2";
+		power-domains = <&ps_sio>, <&ps_spi_p>;
+	};
+
+	ps_spi3: power-controller@258 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x258 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi3";
+		power-domains = <&ps_sio>, <&ps_spi_p>;
+	};
+
+	ps_uart_n: power-controller@268 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x268 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart_n";
+		power-domains = <&ps_uart_p>;
+	};
+
+	ps_uart0: power-controller@270 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x270 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart0";
+		power-domains = <&ps_uart_p>;
+	};
+
+	ps_uart1: power-controller@278 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x278 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart1";
+		power-domains = <&ps_uart_p>;
+	};
+
+	ps_uart2: power-controller@280 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x280 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart2";
+		power-domains = <&ps_uart_p>;
+	};
+
+	ps_uart3: power-controller@288 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x288 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart3";
+		power-domains = <&ps_uart_p>;
+	};
+
+	ps_uart4: power-controller@290 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x290 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart4";
+		power-domains = <&ps_uart_p>;
+	};
+
+	ps_uart5: power-controller@298 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x298 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart5";
+		power-domains = <&ps_uart_p>;
+	};
+
+	ps_uart6: power-controller@2a0 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart6";
+		power-domains = <&ps_uart_p>;
+	};
+
+	ps_uart7: power-controller@2a8 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart7";
+		power-domains = <&ps_uart_p>;
+	};
+
+	ps_uart8: power-controller@2b0 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart8";
+		power-domains = <&ps_uart_p>;
+	};
+
+	ps_mca0: power-controller@2b8 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca0";
+		power-domains = <&ps_audio_p>, <&ps_sio_adma>;
+	};
+
+	ps_mca1: power-controller@2c0 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca1";
+		power-domains = <&ps_audio_p>, <&ps_sio_adma>;
+	};
+
+	ps_mca2: power-controller@2c8 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca2";
+		power-domains = <&ps_audio_p>, <&ps_sio_adma>;
+	};
+
+	ps_mca3: power-controller@2d0 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca3";
+		power-domains = <&ps_audio_p>, <&ps_sio_adma>;
+	};
+
+	ps_mca4: power-controller@2d8 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca4";
+		power-domains = <&ps_audio_p>, <&ps_sio_adma>;
+	};
+
+	ps_mca5: power-controller@2e0 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca5";
+		power-domains = <&ps_audio_p>, <&ps_sio_adma>;
+	};
+
+	ps_dpa0: power-controller@2e8 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dpa0";
+		power-domains = <&ps_audio_p>;
+	};
+
+	ps_dpa1: power-controller@2f0 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dpa1";
+		power-domains = <&ps_audio_p>;
+	};
+
+	ps_mcc: power-controller@2f8 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mcc";
+		apple,always-on; /* Memory controller */
+	};
+
+	ps_spi4: power-controller@260 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x260 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi4";
+		power-domains = <&ps_sio>, <&ps_spi_p>;
+	};
+
+	ps_dcs0: power-controller@300 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x300 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs0";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs1: power-controller@310 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x310 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs1";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs2: power-controller@308 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x308 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs2";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs3: power-controller@318 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x318 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs3";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_smx: power-controller@340 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x340 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "smx";
+		apple,always-on; /* Apple fabric, critical block */
+	};
+
+	ps_apcie: power-controller@348 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x348 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "apcie";
+		power-domains = <&ps_imx>, <&ps_pcie_ref>;
+	};
+
+	ps_rmx: power-controller@350 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x350 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "rmx";
+		/* Apple Fabric, display/image stuff: this can power down */
+	};
+
+	ps_mmx: power-controller@358 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x358 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mmx";
+		/* Apple Fabric, media stuff: this can power down */
+	};
+
+	ps_disp0_fe: power-controller@360 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x360 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp0_fe";
+		power-domains = <&ps_rmx>;
+		apple,always-on; /* TODO: figure out if we can enable PM here */
+	};
+
+	ps_dispext_fe: power-controller@368 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x368 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dispext_fe";
+		power-domains = <&ps_rmx>;
+	};
+
+	ps_dispext_cpu0: power-controller@378 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x378 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dispext_cpu0";
+		power-domains = <&ps_dispext_fe>;
+		apple,min-state = <4>;
+	};
+
+	ps_jpg: power-controller@3c0 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x3c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "jpg";
+		power-domains = <&ps_mmx>;
+	};
+
+	ps_msr: power-controller@3c8 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x3c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "msr";
+		power-domains = <&ps_mmx>;
+	};
+
+	ps_msr_ase_core: power-controller@3d0 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x3d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "msr_ase_core";
+	};
+
+	ps_pmp: power-controller@3d8 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x3d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pmp";
+	};
+
+	ps_pms_sram: power-controller@3e0 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x3e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pms_sram";
+	};
+
+	ps_apcie_gp: power-controller@3e8 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x3e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "apcie_gp";
+		power-domains = <&ps_apcie>;
+	};
+
+	ps_ans2: power-controller@3f0 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x3f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "ans2";
+		/*
+		 * The ADT makes ps_apcie_st depend on ps_ans2 instead, but this
+		 * doesn't make much sense since ANS2 uses APCIE_ST.
+		 */
+		power-domains = <&ps_apcie_st>;
+	};
+
+	ps_gfx: power-controller@3f8 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x3f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "gfx";
+	};
+
+	ps_dcs4: power-controller@320 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x320 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs4";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs5: power-controller@330 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x330 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs5";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs6: power-controller@328 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x328 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs6";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs7: power-controller@338 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x338 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs7";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dispdfr_fe: power-controller@3a8 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x3a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dispdfr_fe";
+		power-domains = <&ps_rmx>;
+	};
+
+	ps_dispdfr_be: power-controller@3b0 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x3b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dispdfr_be";
+		power-domains = <&ps_dispdfr_fe>;
+	};
+
+	ps_mipi_dsi: power-controller@3b8 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x3b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mipi_dsi";
+		power-domains = <&ps_dispdfr_be>;
+	};
+
+	ps_isp_sys: power-controller@400 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x400 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_sys";
+		power-domains = <&ps_rmx>;
+	};
+
+	ps_venc_sys: power-controller@408 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x408 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_sys";
+		power-domains = <&ps_mmx>;
+	};
+
+	ps_avd_sys: power-controller@410 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x410 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "avd_sys";
+		power-domains = <&ps_mmx>;
+	};
+
+	ps_apcie_st: power-controller@418 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x418 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "apcie_st";
+		power-domains = <&ps_apcie>;
+	};
+
+	ps_ane_sys: power-controller@470 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x470 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "ane_sys";
+	};
+
+	ps_atc0_common: power-controller@420 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x420 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "atc0_common";
+	};
+
+	ps_atc0_pcie: power-controller@428 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x428 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "atc0_pcie";
+		power-domains = <&ps_atc0_common>;
+	};
+
+	ps_atc0_cio: power-controller@430 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x430 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "atc0_cio";
+		power-domains = <&ps_atc0_common>;
+	};
+
+	ps_atc0_cio_pcie: power-controller@438 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x438 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "atc0_cio_pcie";
+		power-domains = <&ps_atc0_cio>;
+	};
+
+	ps_atc0_cio_usb: power-controller@440 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x440 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "atc0_cio_usb";
+		power-domains = <&ps_atc0_cio>;
+	};
+
+	ps_atc1_common: power-controller@448 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x448 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "atc1_common";
+	};
+
+	ps_atc1_pcie: power-controller@450 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x450 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "atc1_pcie";
+		power-domains = <&ps_atc1_common>;
+	};
+
+	ps_atc1_cio: power-controller@458 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x458 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "atc1_cio";
+		power-domains = <&ps_atc1_common>;
+	};
+
+	ps_atc1_cio_pcie: power-controller@460 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x460 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "atc1_cio_pcie";
+		power-domains = <&ps_atc1_cio>;
+	};
+
+	ps_atc1_cio_usb: power-controller@468 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x468 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "atc1_cio_usb";
+		power-domains = <&ps_atc1_cio>;
+	};
+
+	ps_sep: power-controller@c00 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0xc00 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sep";
+		apple,always-on; /* Locked on */
+	};
+
+	ps_venc_dma: power-controller@8000 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x8000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_dma";
+		power-domains = <&ps_venc_sys>;
+	};
+
+	ps_venc_pipe4: power-controller@8008 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x8008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_pipe4";
+		power-domains = <&ps_venc_dma>;
+	};
+
+	ps_venc_pipe5: power-controller@8010 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x8010 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_pipe5";
+		power-domains = <&ps_venc_dma>;
+	};
+
+	ps_venc_me0: power-controller@8018 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x8018 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_me0";
+		power-domains = <&ps_venc_pipe4>, <&ps_venc_pipe5>;
+	};
+
+	ps_venc_me1: power-controller@8020 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x8020 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_me1";
+		power-domains = <&ps_venc_pipe4>, <&ps_venc_pipe5>;
+	};
+
+	ps_ane_sys_cpu: power-controller@c000 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0xc000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "ane_sys_cpu";
+		power-domains = <&ps_ane_sys>;
+	};
+
+	ps_disp0_cpu0: power-controller@10018 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x10018 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp0_cpu0";
+		power-domains = <&ps_disp0_fe>;
+		apple,always-on; /* TODO: figure out if we can enable PM here */
+		apple,min-state = <4>;
+	};
+};
+
+&pmgr_mini {
+	ps_debug: power-controller@58 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x58 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "debug";
+		apple,always-on; /* Core AON device */
+	};
+
+	ps_nub_spmi0: power-controller@60 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x60 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "nub_spmi0";
+		apple,always-on; /* Core AON device */
+	};
+
+	ps_nub_aon: power-controller@70 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x70 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "nub_aon";
+		apple,always-on; /* Core AON device */
+	};
+
+	ps_nub_gpio: power-controller@80 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "nub_gpio";
+		apple,always-on; /* Core AON device */
+	};
+
+	ps_nub_fabric: power-controller@a8 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0xa8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "nub_fabric";
+		apple,always-on; /* Core AON device */
+	};
+
+	ps_nub_sram: power-controller@b0 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0xb0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "nub_sram";
+		apple,always-on; /* Core AON device */
+	};
+
+	ps_debug_usb: power-controller@b8 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0xb8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "debug_usb";
+		apple,always-on; /* Core AON device */
+		power-domains = <&ps_debug>;
+	};
+
+	ps_debug_auth: power-controller@c0 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0xc0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "debug_auth";
+		apple,always-on; /* Core AON device */
+		power-domains = <&ps_debug>;
+	};
+
+	ps_nub_spmi1: power-controller@68 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x68 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "nub_spmi1";
+		apple,always-on; /* Core AON device */
+	};
+
+	ps_msg: power-controller@78 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x78 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "msg";
+	};
+
+	ps_atc0_usb_aon: power-controller@88 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x88 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "atc0_usb_aon";
+	};
+
+	ps_atc1_usb_aon: power-controller@90 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x90 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "atc1_usb_aon";
+	};
+
+	ps_atc0_usb: power-controller@98 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x98 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "atc0_usb";
+		power-domains = <&ps_atc0_usb_aon>, <&ps_atc0_common>;
+	};
+
+	ps_atc1_usb: power-controller@a0 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0xa0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "atc1_usb";
+		power-domains = <&ps_atc1_usb_aon>, <&ps_atc1_common>;
+	};
+};
diff --git a/dts/src/arm64/apple/t8103.dtsi b/dts/src/arm64/apple/t8103.dtsi
index 8b61e7fd3e..19afbc9102 100644
--- a/dts/src/arm64/apple/t8103.dtsi
+++ b/dts/src/arm64/apple/t8103.dtsi
@@ -97,11 +97,11 @@
 			     <AIC_FIQ AIC_TMR_HV_VIRT IRQ_TYPE_LEVEL_HIGH>;
 	};
 
-	clk24: clock-24m {
+	clkref: clock-ref {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <24000000>;
-		clock-output-names = "clk24";
+		clock-output-names = "clkref";
 	};
 
 	soc {
@@ -112,6 +112,73 @@
 		ranges;
 		nonposted-mmio;
 
+		i2c0: i2c@235010000 {
+			compatible = "apple,t8103-i2c", "apple,i2c";
+			reg = <0x2 0x35010000 0x0 0x4000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 627 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c0_pins>;
+			pinctrl-names = "default";
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+			power-domains = <&ps_i2c0>;
+		};
+
+		i2c1: i2c@235014000 {
+			compatible = "apple,t8103-i2c", "apple,i2c";
+			reg = <0x2 0x35014000 0x0 0x4000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 628 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c1_pins>;
+			pinctrl-names = "default";
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+			power-domains = <&ps_i2c1>;
+		};
+
+		i2c2: i2c@235018000 {
+			compatible = "apple,t8103-i2c", "apple,i2c";
+			reg = <0x2 0x35018000 0x0 0x4000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 629 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c2_pins>;
+			pinctrl-names = "default";
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+			status = "disabled"; /* not used in all devices */
+			power-domains = <&ps_i2c2>;
+		};
+
+		i2c3: i2c@23501c000 {
+			compatible = "apple,t8103-i2c", "apple,i2c";
+			reg = <0x2 0x3501c000 0x0 0x4000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 630 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c3_pins>;
+			pinctrl-names = "default";
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+			power-domains = <&ps_i2c3>;
+		};
+
+		i2c4: i2c@235020000 {
+			compatible = "apple,t8103-i2c", "apple,i2c";
+			reg = <0x2 0x35020000 0x0 0x4000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 631 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c4_pins>;
+			pinctrl-names = "default";
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+			power-domains = <&ps_i2c4>;
+			status = "disabled"; /* only used in J293 */
+		};
+
 		serial0: serial@235200000 {
 			compatible = "apple,s5l-uart";
 			reg = <0x2 0x35200000 0x0 0x1000>;
@@ -122,8 +189,21 @@
 			 * TODO: figure out the clocking properly, there may
 			 * be a third selectable clock.
 			 */
-			clocks = <&clk24>, <&clk24>;
+			clocks = <&clkref>, <&clkref>;
+			clock-names = "uart", "clk_uart_baud0";
+			power-domains = <&ps_uart0>;
+			status = "disabled";
+		};
+
+		serial2: serial@235208000 {
+			compatible = "apple,s5l-uart";
+			reg = <0x2 0x35208000 0x0 0x1000>;
+			reg-io-width = <4>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 607 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clkref>, <&clkref>;
 			clock-names = "uart", "clk_uart_baud0";
+			power-domains = <&ps_uart2>;
 			status = "disabled";
 		};
 
@@ -132,11 +212,20 @@
 			#interrupt-cells = <3>;
 			interrupt-controller;
 			reg = <0x2 0x3b100000 0x0 0x8000>;
+			power-domains = <&ps_aic>;
+		};
+
+		pmgr: power-management@23b700000 {
+			compatible = "apple,t8103-pmgr", "apple,pmgr", "syscon", "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x2 0x3b700000 0 0x14000>;
 		};
 
 		pinctrl_ap: pinctrl@23c100000 {
 			compatible = "apple,t8103-pinctrl", "apple,pinctrl";
 			reg = <0x2 0x3c100000 0x0 0x100000>;
+			power-domains = <&ps_gpio>;
 
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -154,6 +243,31 @@
 				     <AIC_IRQ 195 IRQ_TYPE_LEVEL_HIGH>,
 				     <AIC_IRQ 196 IRQ_TYPE_LEVEL_HIGH>;
 
+			i2c0_pins: i2c0-pins {
+				pinmux = <APPLE_PINMUX(192, 1)>,
+					 <APPLE_PINMUX(188, 1)>;
+			};
+
+			i2c1_pins: i2c1-pins {
+				pinmux = <APPLE_PINMUX(201, 1)>,
+					 <APPLE_PINMUX(199, 1)>;
+			};
+
+			i2c2_pins: i2c2-pins {
+				pinmux = <APPLE_PINMUX(163, 1)>,
+					 <APPLE_PINMUX(162, 1)>;
+			};
+
+			i2c3_pins: i2c3-pins {
+				pinmux = <APPLE_PINMUX(73, 1)>,
+					 <APPLE_PINMUX(72, 1)>;
+			};
+
+			i2c4_pins: i2c4-pins {
+				pinmux = <APPLE_PINMUX(135, 1)>,
+					 <APPLE_PINMUX(134, 1)>;
+			};
+
 			pcie_pins: pcie-pins {
 				pinmux = <APPLE_PINMUX(150, 1)>,
 					 <APPLE_PINMUX(151, 1)>,
@@ -161,30 +275,10 @@
 			};
 		};
 
-		pinctrl_aop: pinctrl@24a820000 {
-			compatible = "apple,t8103-pinctrl", "apple,pinctrl";
-			reg = <0x2 0x4a820000 0x0 0x4000>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <&pinctrl_aop 0 0 42>;
-			apple,npins = <42>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			interrupt-parent = <&aic>;
-			interrupts = <AIC_IRQ 268 IRQ_TYPE_LEVEL_HIGH>,
-				     <AIC_IRQ 269 IRQ_TYPE_LEVEL_HIGH>,
-				     <AIC_IRQ 270 IRQ_TYPE_LEVEL_HIGH>,
-				     <AIC_IRQ 271 IRQ_TYPE_LEVEL_HIGH>,
-				     <AIC_IRQ 272 IRQ_TYPE_LEVEL_HIGH>,
-				     <AIC_IRQ 273 IRQ_TYPE_LEVEL_HIGH>,
-				     <AIC_IRQ 274 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
 		pinctrl_nub: pinctrl@23d1f0000 {
 			compatible = "apple,t8103-pinctrl", "apple,pinctrl";
 			reg = <0x2 0x3d1f0000 0x0 0x4000>;
+			power-domains = <&ps_nub_gpio>;
 
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -203,6 +297,21 @@
 				     <AIC_IRQ 336 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		pmgr_mini: power-management@23d280000 {
+			compatible = "apple,t8103-pmgr", "apple,pmgr", "syscon", "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x2 0x3d280000 0 0x4000>;
+		};
+
+		wdt: watchdog@23d2b0000 {
+			compatible = "apple,t8103-wdt", "apple,wdt";
+			reg = <0x2 0x3d2b0000 0x0 0x4000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 338 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
 		pinctrl_smc: pinctrl@23e820000 {
 			compatible = "apple,t8103-pinctrl", "apple,pinctrl";
 			reg = <0x2 0x3e820000 0x0 0x4000>;
@@ -224,12 +333,34 @@
 				     <AIC_IRQ 397 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		pinctrl_aop: pinctrl@24a820000 {
+			compatible = "apple,t8103-pinctrl", "apple,pinctrl";
+			reg = <0x2 0x4a820000 0x0 0x4000>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_aop 0 0 42>;
+			apple,npins = <42>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 268 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 269 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 270 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 271 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 272 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 273 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 274 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
 		pcie0_dart_0: dart@681008000 {
 			compatible = "apple,t8103-dart";
 			reg = <0x6 0x81008000 0x0 0x4000>;
 			#iommu-cells = <1>;
 			interrupt-parent = <&aic>;
 			interrupts = <AIC_IRQ 696 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&ps_apcie_gp>;
 		};
 
 		pcie0_dart_1: dart@682008000 {
@@ -238,6 +369,7 @@
 			#iommu-cells = <1>;
 			interrupt-parent = <&aic>;
 			interrupts = <AIC_IRQ 699 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&ps_apcie_gp>;
 		};
 
 		pcie0_dart_2: dart@683008000 {
@@ -246,6 +378,7 @@
 			#iommu-cells = <1>;
 			interrupt-parent = <&aic>;
 			interrupts = <AIC_IRQ 702 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&ps_apcie_gp>;
 		};
 
 		pcie0: pcie@690000000 {
@@ -280,6 +413,7 @@
 			ranges = <0x43000000 0x6 0xa0000000 0x6 0xa0000000 0x0 0x20000000>,
 				 <0x02000000 0x0 0xc0000000 0x6 0xc0000000 0x0 0x40000000>;
 
+			power-domains = <&ps_apcie_gp>;
 			pinctrl-0 = <&pcie_pins>;
 			pinctrl-names = "default";
 
@@ -287,7 +421,6 @@
 				device_type = "pci";
 				reg = <0x0 0x0 0x0 0x0 0x0>;
 				reset-gpios = <&pinctrl_ap 152 GPIO_ACTIVE_LOW>;
-				max-link-speed = <2>;
 
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -307,7 +440,6 @@
 				device_type = "pci";
 				reg = <0x800 0x0 0x0 0x0 0x0>;
 				reset-gpios = <&pinctrl_ap 153 GPIO_ACTIVE_LOW>;
-				max-link-speed = <2>;
 
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -327,7 +459,6 @@
 				device_type = "pci";
 				reg = <0x1000 0x0 0x0 0x0 0x0>;
 				reset-gpios = <&pinctrl_ap 33 GPIO_ACTIVE_LOW>;
-				max-link-speed = <1>;
 
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -345,3 +476,5 @@
 		};
 	};
 };
+
+#include "t8103-pmgr.dtsi"
diff --git a/dts/src/arm64/broadcom/bcm4908/bcm4908-netgear-raxe500.dts b/dts/src/arm64/broadcom/bcm4908/bcm4908-netgear-raxe500.dts
new file mode 100644
index 0000000000..3c2cf2d238
--- /dev/null
+++ b/dts/src/arm64/broadcom/bcm4908/bcm4908-netgear-raxe500.dts
@@ -0,0 +1,50 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "bcm4908.dtsi"
+
+/ {
+	compatible = "netgear,raxe500", "brcm,bcm4908";
+	model = "Netgear RAXE500";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00 0x00 0x00 0x40000000>;
+	};
+};
+
+&ehci {
+	status = "okay";
+};
+
+&ohci {
+	status = "okay";
+};
+
+&xhci {
+	status = "okay";
+};
+
+&ports {
+	port@0 {
+		label = "lan4";
+	};
+
+	port@1 {
+		label = "lan3";
+	};
+
+	port@2 {
+		label = "lan2";
+	};
+
+	port@3 {
+		label = "lan1";
+	};
+
+	port@7 {
+		reg = <7>;
+		phy-mode = "internal";
+		phy-handle = <&phy12>;
+		label = "wan";
+	};
+};
diff --git a/dts/src/arm64/exynos/exynos5433.dtsi b/dts/src/arm64/exynos/exynos5433.dtsi
index 4422021cf4..bfe4ed8a23 100644
--- a/dts/src/arm64/exynos/exynos5433.dtsi
+++ b/dts/src/arm64/exynos/exynos5433.dtsi
@@ -1585,7 +1585,7 @@
 			status = "disabled";
 		};
 
-		hsi2c_0: hsi2c@14e40000 {
+		hsi2c_0: i2c@14e40000 {
 			compatible = "samsung,exynos7-hsi2c";
 			reg = <0x14e40000 0x1000>;
 			interrupts = <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>;
@@ -1598,7 +1598,7 @@
 			status = "disabled";
 		};
 
-		hsi2c_1: hsi2c@14e50000 {
+		hsi2c_1: i2c@14e50000 {
 			compatible = "samsung,exynos7-hsi2c";
 			reg = <0x14e50000 0x1000>;
 			interrupts = <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>;
@@ -1611,7 +1611,7 @@
 			status = "disabled";
 		};
 
-		hsi2c_2: hsi2c@14e60000 {
+		hsi2c_2: i2c@14e60000 {
 			compatible = "samsung,exynos7-hsi2c";
 			reg = <0x14e60000 0x1000>;
 			interrupts = <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>;
@@ -1624,7 +1624,7 @@
 			status = "disabled";
 		};
 
-		hsi2c_3: hsi2c@14e70000 {
+		hsi2c_3: i2c@14e70000 {
 			compatible = "samsung,exynos7-hsi2c";
 			reg = <0x14e70000 0x1000>;
 			interrupts = <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>;
@@ -1637,7 +1637,7 @@
 			status = "disabled";
 		};
 
-		hsi2c_4: hsi2c@14ec0000 {
+		hsi2c_4: i2c@14ec0000 {
 			compatible = "samsung,exynos7-hsi2c";
 			reg = <0x14ec0000 0x1000>;
 			interrupts = <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>;
@@ -1650,7 +1650,7 @@
 			status = "disabled";
 		};
 
-		hsi2c_5: hsi2c@14ed0000 {
+		hsi2c_5: i2c@14ed0000 {
 			compatible = "samsung,exynos7-hsi2c";
 			reg = <0x14ed0000 0x1000>;
 			interrupts = <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>;
@@ -1663,7 +1663,7 @@
 			status = "disabled";
 		};
 
-		hsi2c_6: hsi2c@14ee0000 {
+		hsi2c_6: i2c@14ee0000 {
 			compatible = "samsung,exynos7-hsi2c";
 			reg = <0x14ee0000 0x1000>;
 			interrupts = <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>;
@@ -1676,7 +1676,7 @@
 			status = "disabled";
 		};
 
-		hsi2c_7: hsi2c@14ef0000 {
+		hsi2c_7: i2c@14ef0000 {
 			compatible = "samsung,exynos7-hsi2c";
 			reg = <0x14ef0000 0x1000>;
 			interrupts = <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>;
@@ -1689,7 +1689,7 @@
 			status = "disabled";
 		};
 
-		hsi2c_8: hsi2c@14d90000 {
+		hsi2c_8: i2c@14d90000 {
 			compatible = "samsung,exynos7-hsi2c";
 			reg = <0x14d90000 0x1000>;
 			interrupts = <GIC_SPI 443 IRQ_TYPE_LEVEL_HIGH>;
@@ -1702,7 +1702,7 @@
 			status = "disabled";
 		};
 
-		hsi2c_9: hsi2c@14da0000 {
+		hsi2c_9: i2c@14da0000 {
 			compatible = "samsung,exynos7-hsi2c";
 			reg = <0x14da0000 0x1000>;
 			interrupts = <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>;
@@ -1715,7 +1715,7 @@
 			status = "disabled";
 		};
 
-		hsi2c_10: hsi2c@14de0000 {
+		hsi2c_10: i2c@14de0000 {
 			compatible = "samsung,exynos7-hsi2c";
 			reg = <0x14de0000 0x1000>;
 			interrupts = <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>;
@@ -1728,7 +1728,7 @@
 			status = "disabled";
 		};
 
-		hsi2c_11: hsi2c@14df0000 {
+		hsi2c_11: i2c@14df0000 {
 			compatible = "samsung,exynos7-hsi2c";
 			reg = <0x14df0000 0x1000>;
 			interrupts = <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/dts/src/arm64/exynos/exynos7.dtsi b/dts/src/arm64/exynos/exynos7.dtsi
index c73a597ca6..c3efbc8add 100644
--- a/dts/src/arm64/exynos/exynos7.dtsi
+++ b/dts/src/arm64/exynos/exynos7.dtsi
@@ -359,7 +359,7 @@
 			interrupts = <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
-		hsi2c_0: hsi2c@13640000 {
+		hsi2c_0: i2c@13640000 {
 			compatible = "samsung,exynos7-hsi2c";
 			reg = <0x13640000 0x1000>;
 			interrupts = <GIC_SPI 441 IRQ_TYPE_LEVEL_HIGH>;
@@ -372,7 +372,7 @@
 			status = "disabled";
 		};
 
-		hsi2c_1: hsi2c@13650000 {
+		hsi2c_1: i2c@13650000 {
 			compatible = "samsung,exynos7-hsi2c";
 			reg = <0x13650000 0x1000>;
 			interrupts = <GIC_SPI 442 IRQ_TYPE_LEVEL_HIGH>;
@@ -385,7 +385,7 @@
 			status = "disabled";
 		};
 
-		hsi2c_2: hsi2c@14e60000 {
+		hsi2c_2: i2c@14e60000 {
 			compatible = "samsung,exynos7-hsi2c";
 			reg = <0x14e60000 0x1000>;
 			interrupts = <GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>;
@@ -398,7 +398,7 @@
 			status = "disabled";
 		};
 
-		hsi2c_3: hsi2c@14e70000 {
+		hsi2c_3: i2c@14e70000 {
 			compatible = "samsung,exynos7-hsi2c";
 			reg = <0x14e70000 0x1000>;
 			interrupts = <GIC_SPI 460 IRQ_TYPE_LEVEL_HIGH>;
@@ -411,7 +411,7 @@
 			status = "disabled";
 		};
 
-		hsi2c_4: hsi2c@13660000 {
+		hsi2c_4: i2c@13660000 {
 			compatible = "samsung,exynos7-hsi2c";
 			reg = <0x13660000 0x1000>;
 			interrupts = <GIC_SPI 443 IRQ_TYPE_LEVEL_HIGH>;
@@ -424,7 +424,7 @@
 			status = "disabled";
 		};
 
-		hsi2c_5: hsi2c@13670000 {
+		hsi2c_5: i2c@13670000 {
 			compatible = "samsung,exynos7-hsi2c";
 			reg = <0x13670000 0x1000>;
 			interrupts = <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>;
@@ -437,7 +437,7 @@
 			status = "disabled";
 		};
 
-		hsi2c_6: hsi2c@14e00000 {
+		hsi2c_6: i2c@14e00000 {
 			compatible = "samsung,exynos7-hsi2c";
 			reg = <0x14e00000 0x1000>;
 			interrupts = <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>;
@@ -450,7 +450,7 @@
 			status = "disabled";
 		};
 
-		hsi2c_7: hsi2c@13e10000 {
+		hsi2c_7: i2c@13e10000 {
 			compatible = "samsung,exynos7-hsi2c";
 			reg = <0x13e10000 0x1000>;
 			interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>;
@@ -463,7 +463,7 @@
 			status = "disabled";
 		};
 
-		hsi2c_8: hsi2c@14e20000 {
+		hsi2c_8: i2c@14e20000 {
 			compatible = "samsung,exynos7-hsi2c";
 			reg = <0x14e20000 0x1000>;
 			interrupts = <GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH>;
@@ -476,7 +476,7 @@
 			status = "disabled";
 		};
 
-		hsi2c_9: hsi2c@13680000 {
+		hsi2c_9: i2c@13680000 {
 			compatible = "samsung,exynos7-hsi2c";
 			reg = <0x13680000 0x1000>;
 			interrupts = <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>;
@@ -489,7 +489,7 @@
 			status = "disabled";
 		};
 
-		hsi2c_10: hsi2c@13690000 {
+		hsi2c_10: i2c@13690000 {
 			compatible = "samsung,exynos7-hsi2c";
 			reg = <0x13690000 0x1000>;
 			interrupts = <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>;
@@ -502,7 +502,7 @@
 			status = "disabled";
 		};
 
-		hsi2c_11: hsi2c@136a0000 {
+		hsi2c_11: i2c@136a0000 {
 			compatible = "samsung,exynos7-hsi2c";
 			reg = <0x136a0000 0x1000>;
 			interrupts = <GIC_SPI 447 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/dts/src/arm64/exynos/exynosautov9-sadk.dts b/dts/src/arm64/exynos/exynosautov9-sadk.dts
index ef46d7aa6e..57518cb5e8 100644
--- a/dts/src/arm64/exynos/exynosautov9-sadk.dts
+++ b/dts/src/arm64/exynos/exynosautov9-sadk.dts
@@ -54,3 +54,7 @@
 	vcc-supply = <&ufs_0_fixed_vcc_reg>;
 	vcc-fixed-regulator;
 };
+
+&usi_0 {
+	status = "okay";
+};
diff --git a/dts/src/arm64/exynos/exynosautov9.dtsi b/dts/src/arm64/exynos/exynosautov9.dtsi
index a960c0bc2d..de8fcb82ea 100644
--- a/dts/src/arm64/exynos/exynosautov9.dtsi
+++ b/dts/src/arm64/exynos/exynosautov9.dtsi
@@ -7,6 +7,7 @@
  */
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/samsung,exynos-usi.h>
 
 / {
 	compatible = "samsung,exynosautov9";
@@ -256,16 +257,35 @@
 			reg = <0x17c20000 0x1000>;
 		};
 
-		/* USI: UART */
-		serial_0: uart@10300000 {
-			compatible = "samsung,exynos850-uart";
-			reg = <0x10300000 0x100>;
-			interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart0_bus_dual>;
+		syscon_peric0: syscon@10220000 {
+			compatible = "samsung,exynosautov9-sysreg", "syscon";
+			reg = <0x10220000 0x2000>;
+		};
+
+		usi_0: usi@103000c0 {
+			compatible = "samsung,exynos850-usi";
+			reg = <0x103000c0 0x20>;
+			samsung,sysreg = <&syscon_peric0 0x1000>;
+			samsung,mode = <USI_V2_UART>;
+			samsung,clkreq-on; /* needed for UART mode */
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
 			clocks = <&uart_clock>, <&uart_clock>;
-			clock-names = "uart", "clk_uart_baud0";
+			clock-names = "pclk", "ipclk";
 			status = "disabled";
+
+			/* USI: UART */
+			serial_0: serial@10300000 {
+				compatible = "samsung,exynos850-uart";
+				reg = <0x10300000 0xc0>;
+				interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart0_bus_dual>;
+				clocks = <&uart_clock>, <&uart_clock>;
+				clock-names = "uart", "clk_uart_baud0";
+				status = "disabled";
+			};
 		};
 
 		ufs_0_phy: ufs0-phy@17e04000 {
diff --git a/dts/src/arm64/freescale/fsl-ls1028a-qds-13bb.dts b/dts/src/arm64/freescale/fsl-ls1028a-qds-13bb.dts
new file mode 100644
index 0000000000..f748a2c12a
--- /dev/null
+++ b/dts/src/arm64/freescale/fsl-ls1028a-qds-13bb.dts
@@ -0,0 +1,113 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree fragment for LS1028A QDS board, serdes 13bb
+ *
+ * Copyright 2019-2021 NXP
+ *
+ * Requires a LS1028A QDS board with lane B rework.
+ * Requires a SCH-30841 card with lane A of connector rewired to PHY lane C.
+ * Set-up is a SCH-30842 card in slot 1 and SCH-30841 in slot 2.
+ */
+
+/dts-v1/;
+/plugin/;
+
+/ {
+	fragment@0 {
+		target = <&mdio_slot1>;
+
+		__overlay__ {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			slot1_sgmii: ethernet-phy@2 {
+				/* AQR112 */
+				reg = <0x2>;
+				compatible = "ethernet-phy-ieee802.3-c45";
+			};
+		};
+	};
+
+	fragment@1 {
+		target = <&enetc_port0>;
+
+		__overlay__ {
+			phy-handle = <&slot1_sgmii>;
+			phy-mode = "usxgmii";
+			managed = "in-band-status";
+			status = "okay";
+		};
+	};
+
+	fragment@2 {
+		target = <&mdio_slot2>;
+
+		__overlay__ {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* 4 ports on AQR412 */
+			slot2_qxgmii0: ethernet-phy@0 {
+				reg = <0x0>;
+				compatible = "ethernet-phy-ieee802.3-c45";
+			};
+
+			slot2_qxgmii1: ethernet-phy@1 {
+				reg = <0x1>;
+				compatible = "ethernet-phy-ieee802.3-c45";
+			};
+
+			slot2_qxgmii2: ethernet-phy@2 {
+				reg = <0x2>;
+				compatible = "ethernet-phy-ieee802.3-c45";
+			};
+
+			slot2_qxgmii3: ethernet-phy@3 {
+				reg = <0x3>;
+				compatible = "ethernet-phy-ieee802.3-c45";
+			};
+		};
+	};
+
+	fragment@3 {
+		target = <&mscc_felix_ports>;
+
+		__overlay__ {
+			port@0 {
+				status = "okay";
+				phy-handle = <&slot2_qxgmii0>;
+				phy-mode = "usxgmii";
+				managed = "in-band-status";
+			};
+
+			port@1 {
+				status = "okay";
+				phy-handle = <&slot2_qxgmii1>;
+				phy-mode = "usxgmii";
+				managed = "in-band-status";
+			};
+
+			port@2 {
+				status = "okay";
+				phy-handle = <&slot2_qxgmii2>;
+				phy-mode = "usxgmii";
+				managed = "in-band-status";
+			};
+
+			port@3 {
+				status = "okay";
+				phy-handle = <&slot2_qxgmii3>;
+				phy-mode = "usxgmii";
+				managed = "in-band-status";
+			};
+		};
+	};
+
+	fragment@4 {
+		target = <&mscc_felix>;
+
+		__overlay__ {
+			status = "okay";
+		};
+	};
+};
diff --git a/dts/src/arm64/freescale/fsl-ls1028a-qds-65bb.dts b/dts/src/arm64/freescale/fsl-ls1028a-qds-65bb.dts
new file mode 100644
index 0000000000..8ffb707a15
--- /dev/null
+++ b/dts/src/arm64/freescale/fsl-ls1028a-qds-65bb.dts
@@ -0,0 +1,108 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree fragment for LS1028A QDS board, serdes 69xx
+ *
+ * Copyright 2019-2021 NXP
+ *
+ * Requires a LS1028A QDS board with lane B rework.
+ * Requires a SCH-30842 card in slot 1 and a SCH-28021 card in slot 2.
+ */
+
+/dts-v1/;
+/plugin/;
+
+/ {
+	fragment@0 {
+		target = <&mdio_slot1>;
+
+		__overlay__ {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			slot1_sgmii: ethernet-phy@2 {
+				/* AQR112 */
+				reg = <0x2>;
+				compatible = "ethernet-phy-ieee802.3-c45";
+			};
+		};
+	};
+
+	fragment@1 {
+		target = <&enetc_port0>;
+
+		__overlay__ {
+			phy-handle = <&slot1_sgmii>;
+			phy-mode = "2500base-x";
+			managed = "in-band-status";
+			status = "okay";
+		};
+	};
+
+	fragment@2 {
+		target = <&mdio_slot2>;
+
+		__overlay__ {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* 4 ports on VSC8514 */
+			slot2_qsgmii0: ethernet-phy@8 {
+				reg = <0x8>;
+			};
+
+			slot2_qsgmii1: ethernet-phy@9 {
+				reg = <0x9>;
+			};
+
+			slot2_qsgmii2: ethernet-phy@a {
+				reg = <0xa>;
+			};
+
+			slot2_qsgmii3: ethernet-phy@b {
+				reg = <0xb>;
+			};
+		};
+	};
+
+	fragment@3 {
+		target = <&mscc_felix_ports>;
+
+		__overlay__ {
+			port@0 {
+				status = "okay";
+				phy-handle = <&slot2_qsgmii0>;
+				phy-mode = "qsgmii";
+				managed = "in-band-status";
+			};
+
+			port@1 {
+				status = "okay";
+				phy-handle = <&slot2_qsgmii1>;
+				phy-mode = "qsgmii";
+				managed = "in-band-status";
+			};
+
+			port@2 {
+				status = "okay";
+				phy-handle = <&slot2_qsgmii2>;
+				phy-mode = "qsgmii";
+				managed = "in-band-status";
+			};
+
+			port@3 {
+				status = "okay";
+				phy-handle = <&slot2_qsgmii3>;
+				phy-mode = "qsgmii";
+				managed = "in-band-status";
+			};
+		};
+	};
+
+	fragment@4 {
+		target = <&mscc_felix>;
+
+		__overlay__ {
+			status = "okay";
+		};
+	};
+};
diff --git a/dts/src/arm64/freescale/fsl-ls1028a-qds-7777.dts b/dts/src/arm64/freescale/fsl-ls1028a-qds-7777.dts
new file mode 100644
index 0000000000..eb6a1e674f
--- /dev/null
+++ b/dts/src/arm64/freescale/fsl-ls1028a-qds-7777.dts
@@ -0,0 +1,82 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree fragment for LS1028A QDS board, serdes 7777
+ *
+ * Copyright 2019-2021 NXP
+ *
+ * Requires a LS1028A QDS board without lane B rework.
+ * Requires a SCH-30841 card without lane A/C rewire and with a FW with muxing
+ * disabled, plugged in slot 1.
+ */
+
+/dts-v1/;
+/plugin/;
+
+/ {
+	fragment@0 {
+		target = <&mdio_slot1>;
+
+		__overlay__ {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* 4 ports on AQR412 */
+			slot1_sxgmii0: ethernet-phy@0 {
+				reg = <0x0>;
+				compatible = "ethernet-phy-ieee802.3-c45";
+			};
+
+			slot1_sxgmii1: ethernet-phy@1 {
+				reg = <0x1>;
+				compatible = "ethernet-phy-ieee802.3-c45";
+			};
+
+			slot1_sxgmii2: ethernet-phy@2 {
+				reg = <0x2>;
+				compatible = "ethernet-phy-ieee802.3-c45";
+			};
+
+			slot1_sxgmii3: ethernet-phy@3 {
+				reg = <0x3>;
+				compatible = "ethernet-phy-ieee802.3-c45";
+			};
+		};
+	};
+
+	fragment@1 {
+		target = <&mscc_felix_ports>;
+
+		__overlay__ {
+			port@0 {
+				status = "okay";
+				phy-handle = <&slot1_sxgmii0>;
+				phy-mode = "2500base-x";
+			};
+
+			port@1 {
+				status = "okay";
+				phy-handle = <&slot1_sxgmii1>;
+				phy-mode = "2500base-x";
+			};
+
+			port@2 {
+				status = "okay";
+				phy-handle = <&slot1_sxgmii2>;
+				phy-mode = "2500base-x";
+			};
+
+			port@3 {
+				status = "okay";
+				phy-handle = <&slot1_sxgmii3>;
+				phy-mode = "2500base-x";
+			};
+		};
+	};
+
+	fragment@2 {
+		target = <&mscc_felix>;
+		__overlay__ {
+			status = "okay";
+		};
+	};
+};
diff --git a/dts/src/arm64/freescale/fsl-ls1028a-qds-85bb.dts b/dts/src/arm64/freescale/fsl-ls1028a-qds-85bb.dts
new file mode 100644
index 0000000000..8e90c3088b
--- /dev/null
+++ b/dts/src/arm64/freescale/fsl-ls1028a-qds-85bb.dts
@@ -0,0 +1,107 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree fragment for LS1028A QDS board, serdes 85bb
+ *
+ * Copyright 2019-2021 NXP
+ *
+ * Requires a LS1028A QDS board with lane B rework.
+ * Requires a SCH-24801 card in slot 1 and a SCH-28021 card in slot 2.
+ */
+
+/dts-v1/;
+/plugin/;
+
+/ {
+	fragment@0 {
+		target = <&mdio_slot1>;
+
+		__overlay__ {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			slot1_sgmii: ethernet-phy@1c {
+				/* 1st port on VSC8234 */
+				reg = <0x1c>;
+			};
+		};
+	};
+
+	fragment@1 {
+		target = <&enetc_port0>;
+
+		__overlay__ {
+			phy-handle = <&slot1_sgmii>;
+			phy-mode = "sgmii";
+			managed = "in-band-status";
+			status = "okay";
+		};
+	};
+
+	fragment@2 {
+		target = <&mdio_slot2>;
+
+		__overlay__ {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* 4 ports on VSC8514 */
+			slot2_qsgmii0: ethernet-phy@8 {
+				reg = <0x8>;
+			};
+
+			slot2_qsgmii1: ethernet-phy@9 {
+				reg = <0x9>;
+			};
+
+			slot2_qsgmii2: ethernet-phy@a {
+				reg = <0xa>;
+			};
+
+			slot2_qsgmii3: ethernet-phy@b {
+				reg = <0xb>;
+			};
+		};
+	};
+
+	fragment@3 {
+		target = <&mscc_felix_ports>;
+
+		__overlay__ {
+			port@0 {
+				status = "okay";
+				phy-handle = <&slot2_qsgmii0>;
+				phy-mode = "qsgmii";
+				managed = "in-band-status";
+			};
+
+			port@1 {
+				status = "okay";
+				phy-handle = <&slot2_qsgmii1>;
+				phy-mode = "qsgmii";
+				managed = "in-band-status";
+			};
+
+			port@2 {
+				status = "okay";
+				phy-handle = <&slot2_qsgmii2>;
+				phy-mode = "qsgmii";
+				managed = "in-band-status";
+			};
+
+			port@3 {
+				status = "okay";
+				phy-handle = <&slot2_qsgmii3>;
+				phy-mode = "qsgmii";
+				managed = "in-band-status";
+			};
+		};
+	};
+
+	fragment@4 {
+		target = <&mscc_felix>;
+
+		__overlay__ {
+			status = "okay";
+		};
+	};
+};
diff --git a/dts/src/arm64/freescale/fsl-ls1028a-qds-899b.dts b/dts/src/arm64/freescale/fsl-ls1028a-qds-899b.dts
new file mode 100644
index 0000000000..5d0a094e6c
--- /dev/null
+++ b/dts/src/arm64/freescale/fsl-ls1028a-qds-899b.dts
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree fragment for LS1028A QDS board, serdes 85xx
+ *
+ * Copyright 2019-2021 NXP
+ *
+ * Requires a LS1028A QDS board without lane B rework.
+ * Requires a SCH-24801 card in slot 1.
+ */
+
+/dts-v1/;
+/plugin/;
+
+/ {
+	fragment@0 {
+		target = <&mdio_slot1>;
+		__overlay__ {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* VSC8234 */
+			slot1_sgmii0: ethernet-phy@1c {
+				reg = <0x1c>;
+			};
+
+			slot1_sgmii1: ethernet-phy@1d {
+				reg = <0x1d>;
+			};
+
+			slot1_sgmii2: ethernet-phy@1e {
+				reg = <0x1e>;
+			};
+
+			slot1_sgmii3: ethernet-phy@1f {
+				reg = <0x1f>;
+			};
+		};
+	};
+
+	fragment@1 {
+		target = <&enetc_port0>;
+		__overlay__ {
+			phy-handle = <&slot1_sgmii0>;
+			phy-mode = "sgmii";
+			managed = "in-band-status";
+			status = "okay";
+		};
+	};
+
+	fragment@2 {
+		target = <&mscc_felix_ports>;
+		__overlay__ {
+			port@1 {
+				status = "okay";
+				phy-handle = <&slot1_sgmii1>;
+				phy-mode = "sgmii";
+				managed = "in-band-status";
+			};
+
+			port@2 {
+				status = "okay";
+				phy-handle = <&slot1_sgmii2>;
+				phy-mode = "sgmii";
+				managed = "in-band-status";
+			};
+		};
+	};
+
+	fragment@3 {
+		target = <&mscc_felix>;
+		__overlay__ {
+			status = "okay";
+		};
+	};
+};
diff --git a/dts/src/arm64/freescale/fsl-ls1028a-qds-9999.dts b/dts/src/arm64/freescale/fsl-ls1028a-qds-9999.dts
new file mode 100644
index 0000000000..1ef743c48e
--- /dev/null
+++ b/dts/src/arm64/freescale/fsl-ls1028a-qds-9999.dts
@@ -0,0 +1,79 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree fragment for LS1028A QDS board, serdes 85xx
+ *
+ * Copyright 2019-2021 NXP
+ *
+ * Requires a LS1028A QDS board without lane B rework.
+ * Requires a SCH-24801 card in slot 1.
+ */
+
+/dts-v1/;
+/plugin/;
+
+/ {
+	fragment@0 {
+		target = <&mdio_slot1>;
+		__overlay__ {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* VSC8234 */
+			slot1_sgmii0: ethernet-phy@1c {
+				reg = <0x1c>;
+			};
+
+			slot1_sgmii1: ethernet-phy@1d {
+				reg = <0x1d>;
+			};
+
+			slot1_sgmii2: ethernet-phy@1e {
+				reg = <0x1e>;
+			};
+
+			slot1_sgmii3: ethernet-phy@1f {
+				reg = <0x1f>;
+			};
+		};
+	};
+
+	fragment@1 {
+		target = <&mscc_felix_ports>;
+		__overlay__ {
+			port@0 {
+				status = "okay";
+				phy-handle = <&slot1_sgmii0>;
+				phy-mode = "sgmii";
+				managed = "in-band-status";
+			};
+
+			port@1 {
+				status = "okay";
+				phy-handle = <&slot1_sgmii1>;
+				phy-mode = "sgmii";
+				managed = "in-band-status";
+			};
+
+			port@2 {
+				status = "okay";
+				phy-handle = <&slot1_sgmii2>;
+				phy-mode = "sgmii";
+				managed = "in-band-status";
+			};
+
+			port@3 {
+				status = "okay";
+				phy-handle = <&slot1_sgmii3>;
+				phy-mode = "sgmii";
+				managed = "in-band-status";
+			};
+		};
+	};
+
+	fragment@2 {
+		target = <&mscc_felix>;
+		__overlay__ {
+			status = "okay";
+		};
+	};
+};
diff --git a/dts/src/arm64/freescale/fsl-ls1028a-qds.dts b/dts/src/arm64/freescale/fsl-ls1028a-qds.dts
index 6e2a1da662..177bc1405f 100644
--- a/dts/src/arm64/freescale/fsl-ls1028a-qds.dts
+++ b/dts/src/arm64/freescale/fsl-ls1028a-qds.dts
@@ -25,7 +25,7 @@
 		serial1 = &duart1;
 		mmc0 = &esdhc;
 		mmc1 = &esdhc1;
-		rtc1 = &ftm_alarm0;
+		rtc1 = &ftm_alarm1;
 	};
 
 	chosen {
@@ -211,6 +211,16 @@
 	status = "okay";
 };
 
+&enetc_port1 {
+	phy-handle = <&qds_phy1>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+};
+
+&enetc_port2 {
+	status = "okay";
+};
+
 &esdhc {
 	status = "okay";
 };
@@ -234,6 +244,10 @@
 	};
 };
 
+&ftm_alarm1 {
+	status = "okay";
+};
+
 &i2c0 {
 	status = "okay";
 
@@ -272,11 +286,6 @@
 				vcc-supply = <&sb_3v3>;
 			};
 
-			rtc@51 {
-				compatible = "nxp,pcf2129";
-				reg = <0x51>;
-			};
-
 			eeprom@56 {
 				compatible = "atmel,24c512";
 				reg = <0x56>;
@@ -318,16 +327,28 @@
 
 };
 
-&enetc_port1 {
-	phy-handle = <&qds_phy1>;
-	phy-mode = "rgmii-id";
+&i2c1 {
 	status = "okay";
+
+	rtc@51 {
+		compatible = "nxp,pcf2129";
+		reg = <0x51>;
+	};
 };
 
 &lpuart0 {
 	status = "okay";
 };
 
+&lpuart1 {
+	status = "okay";
+};
+
+&mscc_felix_port4 {
+	ethernet = <&enetc_port2>;
+	status = "okay";
+};
+
 &sai1 {
 	status = "okay";
 };
diff --git a/dts/src/arm64/freescale/fsl-ls1028a-rdb.dts b/dts/src/arm64/freescale/fsl-ls1028a-rdb.dts
index 7719f44bca..68c31cb8ee 100644
--- a/dts/src/arm64/freescale/fsl-ls1028a-rdb.dts
+++ b/dts/src/arm64/freescale/fsl-ls1028a-rdb.dts
@@ -2,7 +2,7 @@
 /*
  * Device Tree file for NXP LS1028A RDB Board.
  *
- * Copyright 2018 NXP
+ * Copyright 2018-2021 NXP
  *
  * Harninder Rai <harninder.rai@nxp.com>
  *
@@ -21,7 +21,14 @@
 		serial1 = &duart1;
 		mmc0 = &esdhc;
 		mmc1 = &esdhc1;
-		rtc1 = &ftm_alarm0;
+		rtc1 = &ftm_alarm1;
+		spi0 = &fspi;
+		ethernet0 = &enetc_port0;
+		ethernet1 = &enetc_port2;
+		ethernet2 = &mscc_felix_port0;
+		ethernet3 = &mscc_felix_port1;
+		ethernet4 = &mscc_felix_port2;
+		ethernet5 = &mscc_felix_port3;
 	};
 
 	chosen {
@@ -102,6 +109,48 @@
 	};
 };
 
+&duart0 {
+	status = "okay";
+};
+
+&duart1 {
+	status = "okay";
+};
+
+&enetc_mdio_pf3 {
+	sgmii_phy0: ethernet-phy@2 {
+		reg = <0x2>;
+	};
+
+	/* VSC8514 QSGMII quad PHY */
+	qsgmii_phy0: ethernet-phy@10 {
+		reg = <0x10>;
+	};
+
+	qsgmii_phy1: ethernet-phy@11 {
+		reg = <0x11>;
+	};
+
+	qsgmii_phy2: ethernet-phy@12 {
+		reg = <0x12>;
+	};
+
+	qsgmii_phy3: ethernet-phy@13 {
+		reg = <0x13>;
+	};
+};
+
+&enetc_port0 {
+	phy-handle = <&sgmii_phy0>;
+	phy-mode = "sgmii";
+	managed = "in-band-status";
+	status = "okay";
+};
+
+&enetc_port2 {
+	status = "okay";
+};
+
 &esdhc {
 	sd-uhs-sdr104;
 	sd-uhs-sdr50;
@@ -132,6 +181,10 @@
 	};
 };
 
+&ftm_alarm1 {
+	status = "okay";
+};
+
 &i2c0 {
 	status = "okay";
 
@@ -188,48 +241,6 @@
 	};
 };
 
-&duart0 {
-	status = "okay";
-};
-
-&duart1 {
-	status = "okay";
-};
-
-&enetc_mdio_pf3 {
-	sgmii_phy0: ethernet-phy@2 {
-		reg = <0x2>;
-	};
-
-	/* VSC8514 QSGMII quad PHY */
-	qsgmii_phy0: ethernet-phy@10 {
-		reg = <0x10>;
-	};
-
-	qsgmii_phy1: ethernet-phy@11 {
-		reg = <0x11>;
-	};
-
-	qsgmii_phy2: ethernet-phy@12 {
-		reg = <0x12>;
-	};
-
-	qsgmii_phy3: ethernet-phy@13 {
-		reg = <0x13>;
-	};
-};
-
-&enetc_port0 {
-	phy-handle = <&sgmii_phy0>;
-	phy-mode = "sgmii";
-	managed = "in-band-status";
-	status = "okay";
-};
-
-&enetc_port2 {
-	status = "okay";
-};
-
 &mscc_felix {
 	status = "okay";
 };
@@ -275,6 +286,10 @@
 	status = "okay";
 };
 
+&pwm0 {
+	status = "okay";
+};
+
 &sai4 {
 	status = "okay";
 };
diff --git a/dts/src/arm64/freescale/fsl-ls1028a.dtsi b/dts/src/arm64/freescale/fsl-ls1028a.dtsi
index fd3f3e8bb6..5bb8c26e08 100644
--- a/dts/src/arm64/freescale/fsl-ls1028a.dtsi
+++ b/dts/src/arm64/freescale/fsl-ls1028a.dtsi
@@ -66,6 +66,13 @@
 		};
 	};
 
+	rtc_clk: rtc-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "rtc_clk";
+	};
+
 	sysclk: sysclk {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
@@ -637,6 +644,18 @@
 			status = "disabled";
 		};
 
+		pcie_ep1: pcie-ep@3400000 {
+			compatible = "fsl,ls1028a-pcie-ep","fsl,ls-pcie-ep";
+			reg = <0x00 0x03400000 0x0 0x00100000
+			       0x80 0x00000000 0x8 0x00000000>;
+			reg-names = "regs", "addr_space";
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; /* PME interrupt */
+			interrupt-names = "pme";
+			num-ib-windows = <6>;
+			num-ob-windows = <8>;
+			status = "disabled";
+		};
+
 		pcie2: pcie@3500000 {
 			compatible = "fsl,ls1028a-pcie";
 			reg = <0x00 0x03500000 0x0 0x00100000>, /* controller registers */
@@ -664,6 +683,18 @@
 			status = "disabled";
 		};
 
+		pcie_ep2: pcie-ep@3500000 {
+			compatible = "fsl,ls1028a-pcie-ep","fsl,ls-pcie-ep";
+			reg = <0x00 0x03500000 0x0 0x00100000
+			       0x88 0x00000000 0x8 0x00000000>;
+			reg-names = "regs", "addr_space";
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; /* PME interrupt */
+			interrupt-names = "pme";
+			num-ib-windows = <6>;
+			num-ob-windows = <8>;
+			status = "disabled";
+		};
+
 		smmu: iommu@5000000 {
 			compatible = "arm,mmu-500";
 			reg = <0 0x5000000 0 0x800000>;
@@ -1084,7 +1115,7 @@
 				interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 
-				ports {
+				mscc_felix_ports: ports {
 					#address-cells = <1>;
 					#size-cells = <0>;
 
@@ -1162,6 +1193,94 @@
 			reg = <0x01 0xf0800000 0x0 0x10000>;
 		};
 
+		pwm0: pwm@2800000 {
+			compatible = "fsl,vf610-ftm-pwm";
+			#pwm-cells = <3>;
+			reg = <0x0 0x2800000 0x0 0x10000>;
+			clock-names = "ftm_sys", "ftm_ext",
+				      "ftm_fix", "ftm_cnt_clk_en";
+			clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+				 <&rtc_clk>, <&clockgen 4 1>;
+			status = "disabled";
+		};
+
+		pwm1: pwm@2810000 {
+			compatible = "fsl,vf610-ftm-pwm";
+			#pwm-cells = <3>;
+			reg = <0x0 0x2810000 0x0 0x10000>;
+			clock-names = "ftm_sys", "ftm_ext",
+				      "ftm_fix", "ftm_cnt_clk_en";
+			clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+				 <&rtc_clk>, <&clockgen 4 1>;
+			status = "disabled";
+		};
+
+		pwm2: pwm@2820000 {
+			compatible = "fsl,vf610-ftm-pwm";
+			#pwm-cells = <3>;
+			reg = <0x0 0x2820000 0x0 0x10000>;
+			clock-names = "ftm_sys", "ftm_ext",
+				      "ftm_fix", "ftm_cnt_clk_en";
+			clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+				 <&rtc_clk>, <&clockgen 4 1>;
+			status = "disabled";
+		};
+
+		pwm3: pwm@2830000 {
+			compatible = "fsl,vf610-ftm-pwm";
+			#pwm-cells = <3>;
+			reg = <0x0 0x2830000 0x0 0x10000>;
+			clock-names = "ftm_sys", "ftm_ext",
+				      "ftm_fix", "ftm_cnt_clk_en";
+			clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+				 <&rtc_clk>, <&clockgen 4 1>;
+			status = "disabled";
+		};
+
+		pwm4: pwm@2840000 {
+			compatible = "fsl,vf610-ftm-pwm";
+			#pwm-cells = <3>;
+			reg = <0x0 0x2840000 0x0 0x10000>;
+			clock-names = "ftm_sys", "ftm_ext",
+				      "ftm_fix", "ftm_cnt_clk_en";
+			clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+				 <&rtc_clk>, <&clockgen 4 1>;
+			status = "disabled";
+		};
+
+		pwm5: pwm@2850000 {
+			compatible = "fsl,vf610-ftm-pwm";
+			#pwm-cells = <3>;
+			reg = <0x0 0x2850000 0x0 0x10000>;
+			clock-names = "ftm_sys", "ftm_ext",
+				      "ftm_fix", "ftm_cnt_clk_en";
+			clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+				 <&rtc_clk>, <&clockgen 4 1>;
+			status = "disabled";
+		};
+
+		pwm6: pwm@2860000 {
+			compatible = "fsl,vf610-ftm-pwm";
+			#pwm-cells = <3>;
+			reg = <0x0 0x2860000 0x0 0x10000>;
+			clock-names = "ftm_sys", "ftm_ext",
+				      "ftm_fix", "ftm_cnt_clk_en";
+			clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+				 <&rtc_clk>, <&clockgen 4 1>;
+			status = "disabled";
+		};
+
+		pwm7: pwm@2870000 {
+			compatible = "fsl,vf610-ftm-pwm";
+			#pwm-cells = <3>;
+			reg = <0x0 0x2870000 0x0 0x10000>;
+			clock-names = "ftm_sys", "ftm_ext",
+				      "ftm_fix", "ftm_cnt_clk_en";
+			clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+				 <&rtc_clk>, <&clockgen 4 1>;
+			status = "disabled";
+		};
+
 		rcpm: power-controller@1e34040 {
 			compatible = "fsl,ls1028a-rcpm", "fsl,qoriq-rcpm-2.1+";
 			reg = <0x0 0x1e34040 0x0 0x1c>;
@@ -1174,6 +1293,15 @@
 			reg = <0x0 0x2800000 0x0 0x10000>;
 			fsl,rcpm-wakeup = <&rcpm 0x0 0x0 0x0 0x0 0x4000 0x0 0x0>;
 			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		ftm_alarm1: timer@2810000 {
+			compatible = "fsl,ls1028a-ftm-alarm";
+			reg = <0x0 0x2810000 0x0 0x10000>;
+			fsl,rcpm-wakeup = <&rcpm 0x0 0x0 0x0 0x0 0x4000 0x0 0x0>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
 		};
 	};
 
diff --git a/dts/src/arm64/freescale/fsl-ls1043a-rdb.dts b/dts/src/arm64/freescale/fsl-ls1043a-rdb.dts
index 3516af4726..b290605e92 100644
--- a/dts/src/arm64/freescale/fsl-ls1043a-rdb.dts
+++ b/dts/src/arm64/freescale/fsl-ls1043a-rdb.dts
@@ -94,6 +94,8 @@
 		compatible = "n25q128a13", "jedec,spi-nor";  /* 16MB */
 		reg = <0>;
 		spi-max-frequency = <1000000>; /* input clock */
+		fsl,spi-cs-sck-delay = <100>;
+		fsl,spi-sck-cs-delay = <100>;
 	};
 
 	slic@2 {
diff --git a/dts/src/arm64/freescale/fsl-ls1088a.dtsi b/dts/src/arm64/freescale/fsl-ls1088a.dtsi
index f891ef6a37..3ed1f2c51c 100644
--- a/dts/src/arm64/freescale/fsl-ls1088a.dtsi
+++ b/dts/src/arm64/freescale/fsl-ls1088a.dtsi
@@ -206,6 +206,13 @@
 		clock-output-names = "sysclk";
 	};
 
+	reboot {
+		compatible = "syscon-reboot";
+		regmap = <&reset>;
+		offset = <0x0>;
+		mask = <0x02>;
+	};
+
 	soc {
 		compatible = "simple-bus";
 		#address-cells = <2>;
@@ -226,6 +233,11 @@
 			little-endian;
 		};
 
+		reset: syscon@1e60000 {
+			compatible = "fsl,ls1088a-reset", "syscon";
+			reg = <0x0 0x1e60000 0x0 0x10000>;
+		};
+
 		isc: syscon@1f70000 {
 			compatible = "fsl,ls1088a-isc", "syscon";
 			reg = <0x0 0x1f70000 0x0 0x10000>;
@@ -485,6 +497,7 @@
 			dr_mode = "host";
 			snps,quirk-frame-length-adjustment = <0x20>;
 			snps,dis_rxdet_inp3_quirk;
+			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
 			status = "disabled";
 		};
 
diff --git a/dts/src/arm64/freescale/fsl-lx2160a-qds.dts b/dts/src/arm64/freescale/fsl-lx2160a-qds.dts
index d858d9c8b5..2ecfa90f5e 100644
--- a/dts/src/arm64/freescale/fsl-lx2160a-qds.dts
+++ b/dts/src/arm64/freescale/fsl-lx2160a-qds.dts
@@ -31,6 +31,130 @@
 		regulator-boot-on;
 		regulator-always-on;
 	};
+
+	mdio-mux-1 {
+		compatible = "mdio-mux-multiplexer";
+		mux-controls = <&mux 0>;
+		mdio-parent-bus = <&emdio1>;
+		#address-cells=<1>;
+		#size-cells = <0>;
+
+		mdio@0 { /* On-board PHY #1 RGMI1*/
+			reg = <0x00>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mdio@8 { /* On-board PHY #2 RGMI2*/
+			reg = <0x8>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mdio@18 { /* Slot #1 */
+			reg = <0x18>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mdio@19 { /* Slot #2 */
+			reg = <0x19>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mdio@1a { /* Slot #3 */
+			reg = <0x1a>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mdio@1b { /* Slot #4 */
+			reg = <0x1b>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mdio@1c { /* Slot #5 */
+			reg = <0x1c>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mdio@1d { /* Slot #6 */
+			reg = <0x1d>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mdio@1e { /* Slot #7 */
+			reg = <0x1e>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mdio@1f { /* Slot #8 */
+			reg = <0x1f>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	mdio-mux-2 {
+		compatible = "mdio-mux-multiplexer";
+		mux-controls = <&mux 1>;
+		mdio-parent-bus = <&emdio2>;
+		#address-cells=<1>;
+		#size-cells = <0>;
+
+		mdio@0 { /* Slot #1 (secondary EMI) */
+			reg = <0x00>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mdio@1 { /* Slot #2 (secondary EMI) */
+			reg = <0x01>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mdio@2 { /* Slot #3 (secondary EMI) */
+			reg = <0x02>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mdio@3 { /* Slot #4 (secondary EMI) */
+			reg = <0x03>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mdio@4 { /* Slot #5 (secondary EMI) */
+			reg = <0x04>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mdio@5 { /* Slot #6 (secondary EMI) */
+			reg = <0x05>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mdio@6 { /* Slot #7 (secondary EMI) */
+			reg = <0x06>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mdio@7 { /* Slot #8 (secondary EMI) */
+			reg = <0x07>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
 };
 
 &can0 {
@@ -81,6 +205,14 @@
 	};
 };
 
+&emdio1 {
+	status = "okay";
+};
+
+&emdio2 {
+	status = "okay";
+};
+
 &esdhc0 {
 	status = "okay";
 };
@@ -107,6 +239,19 @@
 &i2c0 {
 	status = "okay";
 
+	fpga@66 {
+		compatible = "fsl,lx2160aqds-fpga", "fsl,fpga-qixis-i2c",
+			     "simple-mfd";
+		reg = <0x66>;
+
+		mux: mux-controller {
+			compatible = "reg-mux";
+			#mux-control-cells = <1>;
+			mux-reg-masks = <0x54 0xf8>, /* 0: reg 0x54, bits 7:3 */
+					<0x54 0x07>; /* 1: reg 0x54, bit 2:0 */
+		};
+	};
+
 	i2c-mux@77 {
 		compatible = "nxp,pca9547";
 		reg = <0x77>;
@@ -156,6 +301,10 @@
 	};
 };
 
+&optee {
+	status = "okay";
+};
+
 &sata0 {
 	status = "okay";
 };
diff --git a/dts/src/arm64/freescale/fsl-lx2160a-rdb.dts b/dts/src/arm64/freescale/fsl-lx2160a-rdb.dts
index 028ff8074b..0c44b3cbef 100644
--- a/dts/src/arm64/freescale/fsl-lx2160a-rdb.dts
+++ b/dts/src/arm64/freescale/fsl-lx2160a-rdb.dts
@@ -49,6 +49,14 @@
 	managed = "in-band-status";
 };
 
+&dpmac5 {
+	phy-handle = <&inphi_phy>;
+};
+
+&dpmac6 {
+	phy-handle = <&inphi_phy>;
+};
+
 &dpmac17 {
 	phy-handle = <&rgmii_phy1>;
 	phy-connection-type = "rgmii-id";
@@ -109,6 +117,15 @@
 	};
 };
 
+&emdio2 {
+	status = "okay";
+
+	inphi_phy: ethernet-phy@0 {
+		compatible = "ethernet-phy-id0210.7440";
+		reg = <0x0>;
+	};
+};
+
 &esdhc0 {
 	sd-uhs-sdr104;
 	sd-uhs-sdr50;
@@ -202,6 +219,10 @@
 	};
 };
 
+&optee {
+	status = "okay";
+};
+
 &pcs_mdio3 {
 	status = "okay";
 };
diff --git a/dts/src/arm64/freescale/fsl-lx2160a.dtsi b/dts/src/arm64/freescale/fsl-lx2160a.dtsi
index 2433e6f2ed..7032505f5e 100644
--- a/dts/src/arm64/freescale/fsl-lx2160a.dtsi
+++ b/dts/src/arm64/freescale/fsl-lx2160a.dtsi
@@ -1023,6 +1023,7 @@
 			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
 			dr_mode = "host";
 			snps,quirk-frame-length-adjustment = <0x20>;
+			usb3-lpm-capable;
 			snps,dis_rxdet_inp3_quirk;
 			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
 			status = "disabled";
@@ -1034,6 +1035,7 @@
 			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
 			dr_mode = "host";
 			snps,quirk-frame-length-adjustment = <0x20>;
+			usb3-lpm-capable;
 			snps,dis_rxdet_inp3_quirk;
 			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
 			status = "disabled";
@@ -1751,4 +1753,12 @@
 			};
 		};
 	};
+
+	firmware {
+		optee: optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+			status = "disabled";
+		};
+	};
 };
diff --git a/dts/src/arm64/freescale/fsl-lx2162a-qds.dts b/dts/src/arm64/freescale/fsl-lx2162a-qds.dts
index e1defee1ad..a1644ceed1 100644
--- a/dts/src/arm64/freescale/fsl-lx2162a-qds.dts
+++ b/dts/src/arm64/freescale/fsl-lx2162a-qds.dts
@@ -167,6 +167,14 @@
 	};
 };
 
+&can0 {
+	status = "okay";
+};
+
+&can1 {
+	status = "okay";
+};
+
 &crypto {
 	status = "okay";
 };
@@ -226,10 +234,17 @@
 };
 
 &esdhc0 {
+	sd-uhs-sdr104;
+	sd-uhs-sdr50;
+	sd-uhs-sdr25;
+	sd-uhs-sdr12;
 	status = "okay";
 };
 
 &esdhc1 {
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	bus-width = <8>;
 	status = "okay";
 };
 
@@ -302,11 +317,17 @@
 			rtc@51 {
 				compatible = "nxp,pcf2129";
 				reg = <0x51>;
+				/* IRQ_RTC_B -> IRQ11_B(CPLD) -> IRQ11(CPU), active low */
+				interrupts-extended = <&extirq 11 IRQ_TYPE_LEVEL_LOW>;
 			};
 		};
 	};
 };
 
+&optee {
+	status = "okay";
+};
+
 &sata0 {
 	status = "okay";
 };
diff --git a/dts/src/arm64/freescale/imx8mm-beacon-baseboard.dtsi b/dts/src/arm64/freescale/imx8mm-beacon-baseboard.dtsi
index 6f5e63696e..0da311898e 100644
--- a/dts/src/arm64/freescale/imx8mm-beacon-baseboard.dtsi
+++ b/dts/src/arm64/freescale/imx8mm-beacon-baseboard.dtsi
@@ -43,6 +43,27 @@
 		enable-active-high;
 	};
 
+	reg_usbotg1: regulator-usbotg1 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb_otg1>;
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_camera: regulator-camera {
+		compatible = "regulator-fixed";
+		regulator-name = "mipi_pwr";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&pca6416_1 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <100000>;
+	};
+
 	reg_usdhc2_vmmc: regulator-usdhc2 {
 		compatible = "regulator-fixed";
 		regulator-name = "VSD_3V3";
@@ -67,6 +88,10 @@
 	};
 };
 
+&csi {
+	status = "okay";
+};
+
 &ecspi2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_espi2>;
@@ -90,6 +115,30 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
+
+	camera@3c {
+		compatible = "ovti,ov5640";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ov5640>;
+		reg = <0x3c>;
+		clocks = <&clk IMX8MM_CLK_CLKO1>;
+		clock-names = "xclk";
+		assigned-clocks = <&clk IMX8MM_CLK_CLKO1>;
+		assigned-clock-parents = <&clk IMX8MM_CLK_24M>;
+		assigned-clock-rates = <24000000>;
+		AVDD-supply = <&reg_camera>;  /* 2.8v */
+		powerdown-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+
+		port {
+			/* MIPI CSI-2 bus endpoint */
+			ov5640_to_mipi_csi2: endpoint {
+				remote-endpoint = <&imx8mm_mipi_csi_in>;
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
 };
 
 &i2c4 {
@@ -141,6 +190,18 @@
 	};
 };
 
+&mipi_csi {
+	status = "okay";
+	ports {
+		port@0 {
+			imx8mm_mipi_csi_in: endpoint {
+				remote-endpoint = <&ov5640_to_mipi_csi2>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+};
+
 &sai3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_sai3>;
@@ -169,6 +230,24 @@
 	status = "okay";
 };
 
+&usbotg1 {
+	vbus-supply = <&reg_usbotg1>;
+	disable-over-current;
+	dr_mode="otg";
+	status = "okay";
+};
+
+&usbotg2 {
+	pinctrl-names = "default";
+	disable-over-current;
+	dr_mode="host";
+	status = "okay";
+};
+
+&usbphynop2 {
+	reset-gpios = <&pca6416_1 7 GPIO_ACTIVE_HIGH>;
+};
+
 &usdhc2 {
 	pinctrl-names = "default", "state_100mhz", "state_200mhz";
 	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
@@ -209,12 +288,26 @@
 		>;
 	};
 
+	pinctrl_ov5640: ov5640grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7		0x19
+			MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6		0x19
+			MX8MM_IOMUXC_GPIO1_IO14_CCMSRCGPCMIX_CLKO1	0x59
+		>;
+	};
+
 	pinctrl_pcal6414: pcal6414-gpiogrp {
 		fsl,pins = <
 			MX8MM_IOMUXC_SAI2_MCLK_GPIO4_IO27		0x19
 		>;
 	};
 
+	pinctrl_reg_usb_otg1: usbotg1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI3_RXC_GPIO4_IO29     0x19
+		>;
+	};
+
 	pinctrl_sai3: sai3grp {
 		fsl,pins = <
 			MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC     0xd6
diff --git a/dts/src/arm64/freescale/imx8mm-beacon-som.dtsi b/dts/src/arm64/freescale/imx8mm-beacon-som.dtsi
index 40f5e7a3b0..cf07987ccc 100644
--- a/dts/src/arm64/freescale/imx8mm-beacon-som.dtsi
+++ b/dts/src/arm64/freescale/imx8mm-beacon-som.dtsi
@@ -263,7 +263,6 @@
 	bus-width = <4>;
 	non-removable;
 	cap-power-off-card;
-	pm-ignore-notify;
 	keep-power-in-suspend;
 	mmc-pwrseq = <&usdhc1_pwrseq>;
 	status = "okay";
diff --git a/dts/src/arm64/freescale/imx8mm-evk.dtsi b/dts/src/arm64/freescale/imx8mm-evk.dtsi
index e033d0257b..3bac87b7e1 100644
--- a/dts/src/arm64/freescale/imx8mm-evk.dtsi
+++ b/dts/src/arm64/freescale/imx8mm-evk.dtsi
@@ -116,6 +116,13 @@
 			reg = <0>;
 			reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
 			reset-assert-us = <10000>;
+			qca,disable-smarteee;
+			vddio-supply = <&vddio>;
+
+			vddio: vddio-regulator {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
 		};
 	};
 };
diff --git a/dts/src/arm64/freescale/imx8mm-icore-mx8mm-ctouch2.dts b/dts/src/arm64/freescale/imx8mm-icore-mx8mm-ctouch2.dts
index 5389d6f2be..5027454028 100644
--- a/dts/src/arm64/freescale/imx8mm-icore-mx8mm-ctouch2.dts
+++ b/dts/src/arm64/freescale/imx8mm-icore-mx8mm-ctouch2.dts
@@ -91,7 +91,6 @@
 	max-frequency = <50000000>;
 	bus-width = <4>;
 	no-1-8-v;
-	pm-ignore-notify;
 	keep-power-in-suspend;
 	status = "okay";
 };
diff --git a/dts/src/arm64/freescale/imx8mm-icore-mx8mm-edimm2.2.dts b/dts/src/arm64/freescale/imx8mm-icore-mx8mm-edimm2.2.dts
index a4a2ada148..ddac8bc7ae 100644
--- a/dts/src/arm64/freescale/imx8mm-icore-mx8mm-edimm2.2.dts
+++ b/dts/src/arm64/freescale/imx8mm-icore-mx8mm-edimm2.2.dts
@@ -91,7 +91,6 @@
 	max-frequency = <50000000>;
 	bus-width = <4>;
 	no-1-8-v;
-	pm-ignore-notify;
 	keep-power-in-suspend;
 	status = "okay";
 };
diff --git a/dts/src/arm64/freescale/imx8mm-tqma8mqml-mba8mx.dts b/dts/src/arm64/freescale/imx8mm-tqma8mqml-mba8mx.dts
new file mode 100644
index 0000000000..7844878788
--- /dev/null
+++ b/dts/src/arm64/freescale/imx8mm-tqma8mqml-mba8mx.dts
@@ -0,0 +1,253 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2020-2021 TQ-Systems GmbH
+ */
+
+/dts-v1/;
+
+#include "imx8mm-tqma8mqml.dtsi"
+#include "mba8mx.dtsi"
+
+/ {
+	model = "TQ-Systems GmbH i.MX8MM TQMa8MxML on MBa8Mx";
+	compatible = "tq,imx8mm-tqma8mqml-mba8mx", "tq,imx8mm-tqma8mqml", "fsl,imx8mm";
+
+	aliases {
+		eeprom0 = &eeprom3;
+		mmc0 = &usdhc3;
+		mmc1 = &usdhc2;
+		mmc2 = &usdhc1;
+		rtc0 = &pcf85063;
+		rtc1 = &snvs_rtc;
+	};
+
+	reg_usdhc2_vmmc: regulator-vmmc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <100>;
+		off-on-delay-us = <12000>;
+	};
+
+	extcon_usbotg1: extcon-usbotg1 {
+		compatible = "linux,extcon-usb-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb1_extcon>;
+		id-gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&i2c1 {
+	expander2: gpio@27 {
+		compatible = "nxp,pca9555";
+		reg = <0x27>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		vcc-supply = <&reg_vcc_3v3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_expander>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&sai3 {
+	assigned-clocks = <&clk IMX8MM_CLK_SAI3>;
+	assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
+	clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3", "pll8k", "pll11k";
+	clocks = <&clk IMX8MM_CLK_SAI3_IPG>, <&clk IMX8MM_CLK_DUMMY>,
+		<&clk IMX8MM_CLK_SAI3_ROOT>, <&clk IMX8MM_CLK_DUMMY>,
+		<&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_AUDIO_PLL1_OUT>,
+		<&clk IMX8MM_AUDIO_PLL2_OUT>;
+};
+
+&tlv320aic3x04 {
+	clock-names = "mclk";
+	clocks = <&clk IMX8MM_CLK_SAI3_ROOT>;
+};
+
+&uart1 {
+	assigned-clocks = <&clk IMX8MM_CLK_UART1>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
+};
+
+&uart2 {
+	assigned-clocks = <&clk IMX8MM_CLK_UART2>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
+	dr_mode = "otg";
+	extcon = <&extcon_usbotg1>;
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	power-active-high;
+	over-current-active-low;
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	disable-over-current;
+	vbus-supply = <&reg_hub_vbus>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <MX8MM_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK	0x00000006>,
+			   <MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI	0x00000006>,
+			   <MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO	0x00000006>,
+			   <MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9		0x00000006>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK	0x00000006>,
+			   <MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI	0x00000006>,
+			   <MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO	0x00000006>,
+			   <MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13		0x00000006>;
+	};
+
+	pinctrl_expander: expandergrp {
+		fsl,pins = <MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9		0x94>;
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <MX8MM_IOMUXC_ENET_MDC_ENET1_MDC		0x40000002>,
+			   <MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO		0x40000002>,
+			   <MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3	0x14>,
+			   <MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2	0x14>,
+			   <MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1	0x14>,
+			   <MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0	0x14>,
+			   <MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3	0x90>,
+			   <MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2	0x90>,
+			   <MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1	0x90>,
+			   <MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0	0x90>,
+			   <MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC	0x14>,
+			   <MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC	0x90>,
+			   <MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x90>,
+			   <MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x14>;
+	};
+
+	pinctrl_gpiobutton: gpiobuttongrp {
+		fsl,pins = <MX8MM_IOMUXC_GPIO1_IO05_GPIO1_IO5		0x84>,
+			   <MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7		0x84>,
+			   <MX8MM_IOMUXC_SD1_CLK_GPIO2_IO0		0x84>;
+	};
+
+	pinctrl_gpioled: gpioledgrp {
+		fsl,pins = <MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0		0x84>,
+			   <MX8MM_IOMUXC_NAND_DQS_GPIO3_IO14		0x84>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL		0x40000004>,
+			   <MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA		0x40000004>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <MX8MM_IOMUXC_I2C2_SCL_GPIO5_IO16		0x40000004>,
+			   <MX8MM_IOMUXC_I2C2_SDA_GPIO5_IO17		0x40000004>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL		0x40000004>,
+			   <MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA		0x40000004>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins = <MX8MM_IOMUXC_I2C3_SCL_GPIO5_IO18		0x40000004>,
+			   <MX8MM_IOMUXC_I2C3_SDA_GPIO5_IO19		0x40000004>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <MX8MM_IOMUXC_GPIO1_IO14_PWM3_OUT		0x14>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <MX8MM_IOMUXC_GPIO1_IO15_PWM4_OUT		0x14>;
+	};
+
+	pinctrl_sai3: sai3grp {
+		fsl,pins = <MX8MM_IOMUXC_SAI3_MCLK_SAI3_MCLK		0x94>,
+			   <MX8MM_IOMUXC_SAI3_RXC_SAI3_RX_BCLK		0x94>,
+			   <MX8MM_IOMUXC_SAI3_RXFS_SAI3_RX_SYNC		0x94>,
+			   <MX8MM_IOMUXC_SAI3_RXD_SAI3_RX_DATA0		0x94>,
+			   <MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC		0x94>,
+			   <MX8MM_IOMUXC_SAI3_TXD_SAI3_TX_DATA0		0x94>,
+			   <MX8MM_IOMUXC_SAI3_TXC_SAI3_TX_BCLK		0x94>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX		0x16>,
+			   <MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX		0x16>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX		0x16>,
+			   <MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX		0x16>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX		0x16>,
+			   <MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX		0x16>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX		0x16>,
+			   <MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX		0x16>;
+	};
+
+	pinctrl_usbotg1: usbotg1grp {
+		fsl,pins = <MX8MM_IOMUXC_GPIO1_IO12_USB1_OTG_PWR	0x84>,
+			   <MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC		0x84>;
+	};
+
+	pinctrl_usb1_extcon: usb1-extcongrp {
+		fsl,pins = <MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10		0x1c0>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2grpgpiogrp {
+		fsl,pins = <MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x84>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x1d4>,
+			   <MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d4>,
+			   <MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d4>,
+			   <MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d4>,
+			   <MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d4>,
+			   <MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d4>,
+			   <MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x84>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x1d4>,
+			   <MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d4>,
+			   <MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d4>,
+			   <MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d4>,
+			   <MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d4>,
+			   <MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d4>,
+			   <MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x84>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x1d4>,
+			   <MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d4>,
+			   <MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d4>,
+			   <MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d4>,
+			   <MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d4>,
+			   <MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d4>,
+			   <MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x84>;
+	};
+};
diff --git a/dts/src/arm64/freescale/imx8mm-tqma8mqml.dtsi b/dts/src/arm64/freescale/imx8mm-tqma8mqml.dtsi
new file mode 100644
index 0000000000..284e62acc0
--- /dev/null
+++ b/dts/src/arm64/freescale/imx8mm-tqma8mqml.dtsi
@@ -0,0 +1,335 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2020-2021 TQ-Systems GmbH
+ */
+
+#include "imx8mm.dtsi"
+
+/ {
+	model = "TQ-Systems GmbH i.MX8MM TQMa8MxML";
+	compatible = "tq,imx8mm-tqma8mqml", "fsl,imx8mm";
+
+	memory@40000000 {
+		device_type = "memory";
+		/*  our minimum RAM config will be 1024 MiB */
+		reg = <0x00000000 0x40000000 0 0x40000000>;
+	};
+
+	/* e-MMC IO, needed for HS modes */
+	reg_vcc1v8: regulator-vcc1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "TQMA8MXML_VCC1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	/* identical to buck4_reg, but should never change */
+	reg_vcc3v3: regulator-vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "TQMA8MXML_VCC3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* global autoconfigured region for contiguous allocations */
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			/* 640 MiB */
+			size = <0 0x28000000>;
+			/*  1024 - 128 MiB, our minimum RAM config will be 1024 MiB */
+			alloc-ranges = <0 0x40000000 0 0x78000000>;
+			linux,cma-default;
+		};
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&flexspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexspi>;
+	status = "okay";
+
+	flash0: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <84000000>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+	};
+};
+
+&gpu_2d {
+	status = "okay";
+};
+
+&gpu_3d {
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	sensor0: temperature-sensor-eeprom@1b {
+		compatible = "nxp,se97", "jedec,jc-42.4-temp";
+		reg = <0x1b>;
+	};
+
+	pca9450: pmic@25 {
+		compatible = "nxp,pca9450a";
+		reg = <0x25>;
+
+		/* PMIC PCA9450 PMIC_nINT GPIO1_IO08 */
+		pinctrl-0 = <&pinctrl_pmic>;
+		pinctrl-names = "default";
+		interrupt-parent = <&gpio1>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+
+		regulators {
+			/* V_0V85_SOC: 0.85 */
+			buck1_reg: BUCK1 {
+				regulator-name = "BUCK1";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			/* VDD_ARM */
+			buck2_reg: BUCK2 {
+				regulator-name = "BUCK2";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-boot-on;
+				regulator-always-on;
+				nxp,dvs-run-voltage = <950000>;
+				nxp,dvs-standby-voltage = <850000>;
+				regulator-ramp-delay = <3125>;
+			};
+
+			/* V_0V85_GPU / DRAM / VPU */
+			buck3_reg: BUCK3 {
+				regulator-name = "BUCK3";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <950000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			/* VCC3V3 -> VMMC, ... must not be changed */
+			buck4_reg: BUCK4 {
+				regulator-name = "BUCK4";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* V_1V8 -> VQMMC, SPI-NOR, ... must not be changed */
+			buck5_reg: BUCK5 {
+				regulator-name = "BUCK5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* V_1V1 -> RAM, ... must not be changed */
+			buck6_reg: BUCK6 {
+				regulator-name = "BUCK6";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* V_1V8_SNVS */
+			ldo1_reg: LDO1 {
+				regulator-name = "LDO1";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* V_0V8_SNVS */
+			ldo2_reg: LDO2 {
+				regulator-name = "LDO2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* V_1V8_ANA */
+			ldo3_reg: LDO3 {
+				regulator-name = "LDO3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* V_0V9_MIPI */
+			ldo4_reg: LDO4 {
+				regulator-name = "LDO4";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VCC SD IO - switched using SD2 VSELECT */
+			ldo5_reg: LDO5 {
+				regulator-name = "LDO5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+		};
+	};
+
+
+	pcf85063: rtc@51 {
+		compatible = "nxp,pcf85063a";
+		reg = <0x51>;
+		quartz-load-femtofarads = <7000>;
+	};
+
+	eeprom1: eeprom@53 {
+		compatible = "nxp,se97b", "atmel,24c02";
+		read-only;
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+
+	eeprom0: eeprom@57 {
+		compatible = "atmel,24c64";
+		reg = <0x57>;
+		pagesize = <32>;
+	};
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	no-sd;
+	no-sdio;
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc1v8>;
+	status = "okay";
+};
+
+/*
+ * Attention:
+ * wdog reset is routed to PMIC, PMIC must be preconfigured to force POR
+ * without LDO for SNVS. GPIO1_IO02 must not be used as GPIO.
+ */
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_flexspi: flexspigrp {
+		fsl,pins = <MX8MM_IOMUXC_NAND_ALE_QSPI_A_SCLK		0x82>,
+			   <MX8MM_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B	0x82>,
+			   <MX8MM_IOMUXC_NAND_DATA00_QSPI_A_DATA0	0x82>,
+			   <MX8MM_IOMUXC_NAND_DATA01_QSPI_A_DATA1	0x82>,
+			   <MX8MM_IOMUXC_NAND_DATA02_QSPI_A_DATA2	0x82>,
+			   <MX8MM_IOMUXC_NAND_DATA03_QSPI_A_DATA3	0x82>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL		0x40000004>,
+			   <MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA		0x40000004>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins = <MX8MM_IOMUXC_I2C1_SCL_GPIO5_IO14		0x40000004>,
+			   <MX8MM_IOMUXC_I2C1_SDA_GPIO5_IO15		0x40000004>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8		0x94>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = <MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19		0x84>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x1d4>,
+			   <MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d2>,
+			   <MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d4>,
+			   <MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d4>,
+			   <MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d4>,
+			   <MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d4>,
+			   <MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d4>,
+			   <MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5	0x1d4>,
+			   <MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6	0x1d4>,
+			   <MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d4>,
+			   <MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE	0x84>,
+			   /* option USDHC3_RESET_B not defined, only in RM */
+			   <MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16	0x84>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x1d2>,
+			   <MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d2>,
+			   <MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d4>,
+			   <MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d4>,
+			   <MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d4>,
+			   <MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d4>,
+			   <MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d4>,
+			   <MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5	0x1d4>,
+			   <MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6	0x1d4>,
+			   <MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d4>,
+			   <MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE	0x84>,
+			   /* option USDHC3_RESET_B not defined, only in RM */
+			   <MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16	0x84>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x1d6>,
+			   <MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d2>,
+			   <MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d4>,
+			   <MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d4>,
+			   <MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d4>,
+			   <MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d4>,
+			   <MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d4>,
+			   <MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5	0x1d4>,
+			   <MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6	0x1d4>,
+			   <MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d4>,
+			   <MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE	0x84>,
+			   /* option USDHC3_RESET_B not defined, only in RM */
+			   <MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16	0x84>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B	0x84>;
+	};
+};
diff --git a/dts/src/arm64/freescale/imx8mm.dtsi b/dts/src/arm64/freescale/imx8mm.dtsi
index c2f3f118f8..f77f90ed41 100644
--- a/dts/src/arm64/freescale/imx8mm.dtsi
+++ b/dts/src/arm64/freescale/imx8mm.dtsi
@@ -65,6 +65,12 @@
 			clock-latency = <61036>; /* two CLK32 periods */
 			clocks = <&clk IMX8MM_CLK_ARM>;
 			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
 			next-level-cache = <&A53_L2>;
 			operating-points-v2 = <&a53_opp_table>;
 			nvmem-cells = <&cpu_speed_grade>;
@@ -80,6 +86,12 @@
 			clock-latency = <61036>; /* two CLK32 periods */
 			clocks = <&clk IMX8MM_CLK_ARM>;
 			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
 			next-level-cache = <&A53_L2>;
 			operating-points-v2 = <&a53_opp_table>;
 			cpu-idle-states = <&cpu_pd_wait>;
@@ -93,6 +105,12 @@
 			clock-latency = <61036>; /* two CLK32 periods */
 			clocks = <&clk IMX8MM_CLK_ARM>;
 			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
 			next-level-cache = <&A53_L2>;
 			operating-points-v2 = <&a53_opp_table>;
 			cpu-idle-states = <&cpu_pd_wait>;
@@ -106,6 +124,12 @@
 			clock-latency = <61036>; /* two CLK32 periods */
 			clocks = <&clk IMX8MM_CLK_ARM>;
 			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
 			next-level-cache = <&A53_L2>;
 			operating-points-v2 = <&a53_opp_table>;
 			cpu-idle-states = <&cpu_pd_wait>;
@@ -114,6 +138,10 @@
 
 		A53_L2: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
+			cache-size = <0x80000>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
 		};
 	};
 
@@ -591,8 +619,7 @@
 						<&clk IMX8MM_CLK_IPG_AUDIO_ROOT>,
 						<&clk IMX8MM_SYS_PLL3>,
 						<&clk IMX8MM_VIDEO_PLL1>,
-						<&clk IMX8MM_AUDIO_PLL1>,
-						<&clk IMX8MM_AUDIO_PLL2>;
+						<&clk IMX8MM_AUDIO_PLL1>;
 				assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_800M>,
 							 <&clk IMX8MM_ARM_PLL_OUT>,
 							 <&clk IMX8MM_SYS_PLL3_OUT>,
@@ -602,8 +629,7 @@
 							<400000000>,
 							<750000000>,
 							<594000000>,
-							<393216000>,
-							<361267200>;
+							<393216000>;
 			};
 
 			src: reset-controller@30390000 {
@@ -1054,7 +1080,6 @@
 				fsl,num-rx-queues = <3>;
 				nvmem-cells = <&fec_mac_address>;
 				nvmem-cell-names = "mac-address";
-				nvmem_macaddr_swap;
 				fsl,stop-mode = <&gpr 0x10 3>;
 				status = "disabled";
 			};
@@ -1068,6 +1093,22 @@
 			#size-cells = <1>;
 			ranges = <0x32c00000 0x32c00000 0x400000>;
 
+			csi: csi@32e20000 {
+				compatible = "fsl,imx8mm-csi", "fsl,imx7-csi";
+				reg = <0x32e20000 0x1000>;
+				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_CSI1_ROOT>;
+				clock-names = "mclk";
+				power-domains = <&disp_blk_ctrl IMX8MM_DISPBLK_PD_CSI_BRIDGE>;
+				status = "disabled";
+
+				port {
+					csi_in: endpoint {
+						remote-endpoint = <&imx8mm_mipi_csi_out>;
+					};
+				};
+			};
+
 			disp_blk_ctrl: blk-ctrl@32e28000 {
 				compatible = "fsl,imx8mm-disp-blk-ctrl", "syscon";
 				reg = <0x32e28000 0x100>;
@@ -1095,6 +1136,41 @@
 				#power-domain-cells = <1>;
 			};
 
+			mipi_csi: mipi-csi@32e30000 {
+				compatible = "fsl,imx8mm-mipi-csi2";
+				reg = <0x32e30000 0x1000>;
+				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+				assigned-clocks = <&clk IMX8MM_CLK_CSI1_CORE>,
+						  <&clk IMX8MM_CLK_CSI1_PHY_REF>;
+				assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_1000M>,
+							  <&clk IMX8MM_SYS_PLL2_1000M>;
+				clock-frequency = <333000000>;
+				clocks = <&clk IMX8MM_CLK_DISP_APB_ROOT>,
+					 <&clk IMX8MM_CLK_CSI1_ROOT>,
+					 <&clk IMX8MM_CLK_CSI1_PHY_REF>,
+					 <&clk IMX8MM_CLK_DISP_AXI_ROOT>;
+				clock-names = "pclk", "wrap", "phy", "axi";
+				power-domains = <&disp_blk_ctrl IMX8MM_DISPBLK_PD_MIPI_CSI>;
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+					};
+
+					port@1 {
+						reg = <1>;
+
+						imx8mm_mipi_csi_out: endpoint {
+							remote-endpoint = <&csi_in>;
+						};
+					};
+				};
+			};
+
 			usbotg1: usb@32e40000 {
 				compatible = "fsl,imx8mm-usb", "fsl,imx7d-usb";
 				reg = <0x32e40000 0x200>;
diff --git a/dts/src/arm64/freescale/imx8mn-beacon-baseboard.dtsi b/dts/src/arm64/freescale/imx8mn-beacon-baseboard.dtsi
index 376ca8ff72..0f40b43ac0 100644
--- a/dts/src/arm64/freescale/imx8mn-beacon-baseboard.dtsi
+++ b/dts/src/arm64/freescale/imx8mn-beacon-baseboard.dtsi
@@ -126,7 +126,6 @@
 		compatible = "wlf,wm8962";
 		reg = <0x1a>;
 		clocks = <&clk IMX8MN_CLK_SAI3_ROOT>;
-		clock-names = "xclk";
 		DCVDD-supply = <&reg_audio>;
 		DBVDD-supply = <&reg_audio>;
 		AVDD-supply = <&reg_audio>;
diff --git a/dts/src/arm64/freescale/imx8mn-beacon-som.dtsi b/dts/src/arm64/freescale/imx8mn-beacon-som.dtsi
index 3b2d627a03..1133cded9b 100644
--- a/dts/src/arm64/freescale/imx8mn-beacon-som.dtsi
+++ b/dts/src/arm64/freescale/imx8mn-beacon-som.dtsi
@@ -274,7 +274,6 @@
 	bus-width = <4>;
 	non-removable;
 	cap-power-off-card;
-	pm-ignore-notify;
 	keep-power-in-suspend;
 	mmc-pwrseq = <&usdhc1_pwrseq>;
 	status = "okay";
diff --git a/dts/src/arm64/freescale/imx8mn-bsh-smm-s2-common.dtsi b/dts/src/arm64/freescale/imx8mn-bsh-smm-s2-common.dtsi
new file mode 100644
index 0000000000..c11895d9d5
--- /dev/null
+++ b/dts/src/arm64/freescale/imx8mn-bsh-smm-s2-common.dtsi
@@ -0,0 +1,426 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2021 Collabora Ltd.
+ * Copyright 2021 BSH Hausgeraete GmbH
+ */
+
+/dts-v1/;
+
+#include "imx8mn.dtsi"
+
+/ {
+	chosen {
+		stdout-path = &uart4;
+	};
+
+	fec_supply: fec-supply-en {
+		compatible = "regulator-fixed";
+		vin-supply = <&buck4_reg>;
+		regulator-name = "tja1101_en";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 20 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	usdhc2_pwrseq: usdhc2-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usdhc2_pwrseq>;
+		reset-gpios = <&gpio4 27 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_espi2>;
+	status = "okay";
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy0>;
+	phy-supply = <&fec_supply>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			reset-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <20>;
+			reset-deassert-us = <2000>;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	bd71847: pmic@4b {
+		compatible = "rohm,bd71847";
+		reg = <0x4b>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+		rohm,reset-snvs-powered;
+
+		#clock-cells = <0>;
+		clocks = <&osc_32k 0>;
+		clock-output-names = "clk-32k-out";
+
+		regulators {
+			buck1_reg: BUCK1 {
+				/* PMIC_BUCK1 - VDD_SOC */
+				regulator-name = "buck1";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+			};
+
+			buck2_reg: BUCK2 {
+				/* PMIC_BUCK2 - VDD_ARM */
+				regulator-name = "buck2";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+			};
+
+			buck3_reg: BUCK3 {
+				/* PMIC_BUCK5 - VDD_DRAM_VPU_GPU */
+				regulator-name = "buck3";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck4_reg: BUCK4 {
+				/* PMIC_BUCK6 - VDD_3V3 */
+				regulator-name = "buck4";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck5_reg: BUCK5 {
+				/* PMIC_BUCK7 - VDD_1V8 */
+				regulator-name = "buck5";
+				regulator-min-microvolt = <1605000>;
+				regulator-max-microvolt = <1995000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck6_reg: BUCK6 {
+				/* PMIC_BUCK8 - NVCC_DRAM */
+				regulator-name = "buck6";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1_reg: LDO1 {
+				/* PMIC_LDO1 - NVCC_SNVS_1V8 */
+				regulator-name = "ldo1";
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <1900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2_reg: LDO2 {
+				/* PMIC_LDO2 - VDD_SNVS_0V8 */
+				regulator-name = "ldo2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3_reg: LDO3 {
+				/* PMIC_LDO3 - VDDA_1V8 */
+				regulator-name = "ldo3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4_reg: LDO4 {
+				/* PMIC_LDO4 - VDD_MIPI_0V9 */
+				regulator-name = "ldo4";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo6_reg: LDO6 {
+				/* PMIC_LDO6 - VDD_MIPI_1V2 */
+				regulator-name = "ldo6";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&i2c4 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	assigned-clocks = <&clk IMX8MN_CLK_UART3>;
+	assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_80M>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_bluetooth>;
+		shutdown-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+		device-wakeup-gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+		max-speed = <3000000>;
+	};
+};
+
+/* Console */
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "peripheral";
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	mmc-pwrseq = <&usdhc2_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcmf: bcrmf@1 {
+		compatible = "brcm,bcm4329-fmac";
+		reg = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wlan>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wake";
+	};
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_bluetooth: bluetoothgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO15_GPIO1_IO15		0x044	/* BT_REG_ON */
+			MX8MN_IOMUXC_ENET_TD3_GPIO1_IO18		0x046	/* BT_DEV_WAKE */
+			MX8MN_IOMUXC_ENET_RD2_GPIO1_IO28		0x090	/* BT_HOST_WAKE */
+		>;
+	};
+
+	pinctrl_espi2: espi2grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK		0x082
+			MX8MN_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI		0x082
+			MX8MN_IOMUXC_ECSPI2_MISO_ECSPI2_MISO		0x082
+			MX8MN_IOMUXC_ECSPI2_SS0_ECSPI2_SS0		0x040
+		>;
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_ENET_MDC_ENET1_MDC			0x002
+			MX8MN_IOMUXC_ENET_MDIO_ENET1_MDIO		0x002
+			MX8MN_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x090
+			MX8MN_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x090
+			MX8MN_IOMUXC_ENET_RXC_ENET1_RX_ER		0x090
+			MX8MN_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x016
+			MX8MN_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x016
+			MX8MN_IOMUXC_ENET_TD2_ENET1_TX_CLK		0x016
+			MX8MN_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x016
+			MX8MN_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x090
+			MX8MN_IOMUXC_ENET_TXC_ENET1_TX_ER		0x016
+			MX8MN_IOMUXC_SD2_CD_B_GPIO2_IO12		0x150	/* RMII_INT - ENET_INT */
+			MX8MN_IOMUXC_SD2_WP_GPIO2_IO20			0x150	/* RMII_EN - ENET_EN */
+			MX8MN_IOMUXC_SD2_RESET_B_GPIO2_IO19		0x016	/* RMII_WAKE - GPIO_ENET_WAKE */
+			MX8MN_IOMUXC_ENET_RD3_GPIO1_IO29		0x016	/* RMII_RESET - GPIO_ENET_RST */
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_I2C1_SCL_I2C1_SCL			0x400000c2
+			MX8MN_IOMUXC_I2C1_SDA_I2C1_SDA			0x400000c2
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_I2C3_SCL_I2C3_SCL			0x400000c2
+			MX8MN_IOMUXC_I2C3_SDA_I2C3_SDA			0x400000c2
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_I2C4_SCL_I2C4_SCL			0x400000c2
+			MX8MN_IOMUXC_I2C4_SDA_I2C4_SDA			0x400000c2
+		>;
+	};
+
+	pinctrl_pmic: pmicirq {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO03_GPIO1_IO3		0x040
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_UART2_RXD_UART2_DCE_RX		0x040
+			MX8MN_IOMUXC_UART2_TXD_UART2_DCE_TX		0x040
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_UART3_TXD_UART3_DCE_TX		0x040
+			MX8MN_IOMUXC_UART3_RXD_UART3_DCE_RX		0x040
+			MX8MN_IOMUXC_ECSPI1_MISO_UART3_DCE_CTS_B	0x040
+			MX8MN_IOMUXC_ECSPI1_SS0_UART3_DCE_RTS_B		0x040
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_UART4_RXD_UART4_DCE_RX		0x040
+			MX8MN_IOMUXC_UART4_TXD_UART4_DCE_TX		0x040
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK			0x090
+			MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD			0x0d0
+			MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x0d0
+			MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x0d0
+			MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x0d0
+			MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x0d0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
+		fsl,pins = <
+			MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK			0x094
+			MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD			0x0d4
+			MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x0d4
+			MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x0d4
+			MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x0d4
+			MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x0d4
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
+		fsl,pins = <
+			MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK			0x096
+			MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD			0x0d6
+			MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x0d6
+			MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x0d6
+			MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x0d6
+			MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x0d6
+		>;
+	};
+
+	pinctrl_usdhc2_pwrseq: usdhc2pwrseqgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SAI2_MCLK_GPIO4_IO27		0x040	/* WL_REG_ON */
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B		0x046
+		>;
+	};
+
+	pinctrl_wlan: wlangrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO00_GPIO1_IO0		0x0d6	/* GPIO_0 - WIFI_GPIO_0 */
+			MX8MN_IOMUXC_GPIO1_IO08_GPIO1_IO8		0x0d6	/* GPIO_1 - WIFI_GPIO_1 */
+			MX8MN_IOMUXC_GPIO1_IO04_GPIO1_IO4		0x0d6	/* BT_GPIO_5 - WIFI_GPIO_5 */
+			MX8MN_IOMUXC_SPDIF_RX_GPIO5_IO4			0x0d6	/* I2S_CLK - WIFI_GPIO_6 */
+		>;
+	};
+};
diff --git a/dts/src/arm64/freescale/imx8mn-bsh-smm-s2.dts b/dts/src/arm64/freescale/imx8mn-bsh-smm-s2.dts
new file mode 100644
index 0000000000..33f98582ea
--- /dev/null
+++ b/dts/src/arm64/freescale/imx8mn-bsh-smm-s2.dts
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2021 Collabora Ltd.
+ * Copyright 2021 BSH Hausgeraete GmbH
+ */
+
+/dts-v1/;
+
+#include "imx8mn-bsh-smm-s2-common.dtsi"
+
+/ {
+	model = "BSH SMM S2";
+	compatible = "bsh,imx8mn-bsh-smm-s2", "fsl,imx8mn";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0x0 0x10000000>;
+	};
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	nand-on-flash-bbt;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_gpmi_nand: gpmi-nand {
+		fsl,pins = <
+			MX8MN_IOMUXC_NAND_ALE_RAWNAND_ALE		0x00000096
+			MX8MN_IOMUXC_NAND_CE0_B_RAWNAND_CE0_B		0x00000096
+			MX8MN_IOMUXC_NAND_CLE_RAWNAND_CLE		0x00000096
+			MX8MN_IOMUXC_NAND_DATA00_RAWNAND_DATA00		0x00000096
+			MX8MN_IOMUXC_NAND_DATA01_RAWNAND_DATA01		0x00000096
+			MX8MN_IOMUXC_NAND_DATA02_RAWNAND_DATA02		0x00000096
+			MX8MN_IOMUXC_NAND_DATA03_RAWNAND_DATA03		0x00000096
+			MX8MN_IOMUXC_NAND_DATA04_RAWNAND_DATA04		0x00000096
+			MX8MN_IOMUXC_NAND_DATA05_RAWNAND_DATA05		0x00000096
+			MX8MN_IOMUXC_NAND_DATA06_RAWNAND_DATA06		0x00000096
+			MX8MN_IOMUXC_NAND_DATA07_RAWNAND_DATA07		0x00000096
+			MX8MN_IOMUXC_NAND_RE_B_RAWNAND_RE_B		0x00000096
+			MX8MN_IOMUXC_NAND_READY_B_RAWNAND_READY_B	0x00000056
+			MX8MN_IOMUXC_NAND_WE_B_RAWNAND_WE_B		0x00000096
+			MX8MN_IOMUXC_NAND_WP_B_RAWNAND_WP_B		0x00000096
+		>;
+	};
+};
diff --git a/dts/src/arm64/freescale/imx8mn-bsh-smm-s2pro.dts b/dts/src/arm64/freescale/imx8mn-bsh-smm-s2pro.dts
new file mode 100644
index 0000000000..c6a8ed6745
--- /dev/null
+++ b/dts/src/arm64/freescale/imx8mn-bsh-smm-s2pro.dts
@@ -0,0 +1,80 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2021 Collabora Ltd.
+ * Copyright 2021 BSH Hausgeraete GmbH
+ */
+
+/dts-v1/;
+
+#include "imx8mn-bsh-smm-s2-common.dtsi"
+
+/ {
+	model = "BSH SMM S2 PRO";
+	compatible = "bsh,imx8mn-bsh-smm-s2pro", "fsl,imx8mn";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0x0 0x20000000>;
+	};
+};
+
+/* eMMC */
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SD1_CLK_USDHC1_CLK			0x40000090
+			MX8MN_IOMUXC_SD1_CMD_USDHC1_CMD			0x0d0
+			MX8MN_IOMUXC_SD1_DATA0_USDHC1_DATA0		0x0d0
+			MX8MN_IOMUXC_SD1_DATA1_USDHC1_DATA1		0x0d0
+			MX8MN_IOMUXC_SD1_DATA2_USDHC1_DATA2		0x0d0
+			MX8MN_IOMUXC_SD1_DATA3_USDHC1_DATA3		0x0d0
+			MX8MN_IOMUXC_SD1_DATA4_USDHC1_DATA4		0x0d0
+			MX8MN_IOMUXC_SD1_DATA5_USDHC1_DATA5		0x0d0
+			MX8MN_IOMUXC_SD1_DATA6_USDHC1_DATA6		0x0d0
+			MX8MN_IOMUXC_SD1_DATA7_USDHC1_DATA7		0x0d0
+			MX8MN_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x090
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+		fsl,pins = <
+			MX8MN_IOMUXC_SD1_CLK_USDHC1_CLK			0x40000094
+			MX8MN_IOMUXC_SD1_CMD_USDHC1_CMD			0x0d4
+			MX8MN_IOMUXC_SD1_DATA0_USDHC1_DATA0		0x0d4
+			MX8MN_IOMUXC_SD1_DATA1_USDHC1_DATA1		0x0d4
+			MX8MN_IOMUXC_SD1_DATA2_USDHC1_DATA2		0x0d4
+			MX8MN_IOMUXC_SD1_DATA3_USDHC1_DATA3		0x0d4
+			MX8MN_IOMUXC_SD1_DATA4_USDHC1_DATA4		0x0d4
+			MX8MN_IOMUXC_SD1_DATA5_USDHC1_DATA5		0x0d4
+			MX8MN_IOMUXC_SD1_DATA6_USDHC1_DATA6		0x0d4
+			MX8MN_IOMUXC_SD1_DATA7_USDHC1_DATA7		0x0d4
+			MX8MN_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x094
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+		fsl,pins = <
+			MX8MN_IOMUXC_SD1_CLK_USDHC1_CLK			0x40000096
+			MX8MN_IOMUXC_SD1_CMD_USDHC1_CMD			0x0d6
+			MX8MN_IOMUXC_SD1_DATA0_USDHC1_DATA0		0x0d6
+			MX8MN_IOMUXC_SD1_DATA1_USDHC1_DATA1		0x0d6
+			MX8MN_IOMUXC_SD1_DATA2_USDHC1_DATA2		0x0d6
+			MX8MN_IOMUXC_SD1_DATA3_USDHC1_DATA3		0x0d6
+			MX8MN_IOMUXC_SD1_DATA4_USDHC1_DATA4		0x0d6
+			MX8MN_IOMUXC_SD1_DATA5_USDHC1_DATA5		0x0d6
+			MX8MN_IOMUXC_SD1_DATA6_USDHC1_DATA6		0x0d6
+			MX8MN_IOMUXC_SD1_DATA7_USDHC1_DATA7		0x0d6
+			MX8MN_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x096
+		>;
+	};
+};
diff --git a/dts/src/arm64/freescale/imx8mn-evk.dtsi b/dts/src/arm64/freescale/imx8mn-evk.dtsi
index 85e65f8719..c3f15192b7 100644
--- a/dts/src/arm64/freescale/imx8mn-evk.dtsi
+++ b/dts/src/arm64/freescale/imx8mn-evk.dtsi
@@ -97,6 +97,15 @@
 		ethphy0: ethernet-phy@0 {
 			compatible = "ethernet-phy-ieee802.3-c22";
 			reg = <0>;
+			reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			qca,disable-smarteee;
+			vddio-supply = <&vddio>;
+
+			vddio: vddio-regulator {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
 		};
 	};
 };
diff --git a/dts/src/arm64/freescale/imx8mn-tqma8mqnl-mba8mx.dts b/dts/src/arm64/freescale/imx8mn-tqma8mqnl-mba8mx.dts
new file mode 100644
index 0000000000..3f1e49bfe3
--- /dev/null
+++ b/dts/src/arm64/freescale/imx8mn-tqma8mqnl-mba8mx.dts
@@ -0,0 +1,237 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2020-2021 TQ-Systems GmbH
+ */
+
+/dts-v1/;
+
+#include "imx8mn-tqma8mqnl.dtsi"
+#include "mba8mx.dtsi"
+
+/ {
+	model = "TQ-Systems GmbH i.MX8MN TQMa8MxNL on MBa8Mx";
+	compatible = "tq,imx8mn-tqma8mqnl-mba8mx", "tq,imx8mn-tqma8mqnl", "fsl,imx8mn";
+
+	aliases {
+		eeprom0 = &eeprom3;
+		mmc0 = &usdhc3;
+		mmc1 = &usdhc2;
+		mmc2 = &usdhc1;
+		rtc0 = &pcf85063;
+		rtc1 = &snvs_rtc;
+	};
+
+	reg_usdhc2_vmmc: regulator-vmmc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <100>;
+		off-on-delay-us = <12000>;
+	};
+};
+
+/* Located on TQMa8MxML-ADAP */
+&gpio2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb0hub_sel>;
+
+	sel-usb-hub-hog {
+		gpio-hog;
+		gpios = <1 GPIO_ACTIVE_HIGH>;
+		output-high;
+	};
+};
+
+&i2c1 {
+	expander2: gpio@27 {
+		compatible = "nxp,pca9555";
+		reg = <0x27>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		vcc-supply = <&reg_vcc_3v3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_expander2>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&sai3 {
+	assigned-clocks = <&clk IMX8MN_CLK_SAI3>;
+	assigned-clock-parents = <&clk IMX8MN_AUDIO_PLL1_OUT>;
+	clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3", "pll8k", "pll11k";
+	clocks = <&clk IMX8MN_CLK_SAI3_IPG>, <&clk IMX8MN_CLK_DUMMY>,
+		 <&clk IMX8MN_CLK_SAI3_ROOT>, <&clk IMX8MN_CLK_DUMMY>,
+		 <&clk IMX8MN_CLK_DUMMY>, <&clk IMX8MN_AUDIO_PLL1_OUT>,
+		 <&clk IMX8MN_AUDIO_PLL2_OUT>;
+};
+
+&tlv320aic3x04 {
+	clock-names = "mclk";
+	clocks = <&clk IMX8MN_CLK_SAI3_ROOT>;
+};
+
+&usbotg1 {
+	dr_mode = "host";
+	disable-over-current;
+	power-active-high;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <MX8MN_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK	0x00000146>,
+			   <MX8MN_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI	0x00000146>,
+			   <MX8MN_IOMUXC_ECSPI1_MISO_ECSPI1_MISO	0x00000146>,
+			   <MX8MN_IOMUXC_ECSPI1_SS0_GPIO5_IO9		0x00000146>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <MX8MN_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK	0x00000146>,
+			   <MX8MN_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI	0x00000146>,
+			   <MX8MN_IOMUXC_ECSPI2_MISO_ECSPI2_MISO	0x00000146>,
+			   <MX8MN_IOMUXC_ECSPI2_SS0_GPIO5_IO13		0x00000146>;
+	};
+
+	pinctrl_expander2: expander2grp {
+		fsl,pins = <MX8MN_IOMUXC_GPIO1_IO09_GPIO1_IO9		0x94>;
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <MX8MN_IOMUXC_ENET_MDC_ENET1_MDC		0x40000002>,
+			   <MX8MN_IOMUXC_ENET_MDIO_ENET1_MDIO		0x40000002>,
+			   <MX8MN_IOMUXC_ENET_TD3_ENET1_RGMII_TD3	0x14>,
+			   <MX8MN_IOMUXC_ENET_TD2_ENET1_RGMII_TD2	0x14>,
+			   <MX8MN_IOMUXC_ENET_TD1_ENET1_RGMII_TD1	0x14>,
+			   <MX8MN_IOMUXC_ENET_TD0_ENET1_RGMII_TD0	0x14>,
+			   <MX8MN_IOMUXC_ENET_RD3_ENET1_RGMII_RD3	0x90>,
+			   <MX8MN_IOMUXC_ENET_RD2_ENET1_RGMII_RD2	0x90>,
+			   <MX8MN_IOMUXC_ENET_RD1_ENET1_RGMII_RD1	0x90>,
+			   <MX8MN_IOMUXC_ENET_RD0_ENET1_RGMII_RD0	0x90>,
+			   <MX8MN_IOMUXC_ENET_TXC_ENET1_RGMII_TXC	0x14>,
+			   <MX8MN_IOMUXC_ENET_RXC_ENET1_RGMII_RXC	0x90>,
+			   <MX8MN_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x90>,
+			   <MX8MN_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x14>;
+	};
+
+	pinctrl_gpiobutton: gpiobuttongrp {
+		fsl,pins = <MX8MN_IOMUXC_GPIO1_IO05_GPIO1_IO5		0x84>,
+			   <MX8MN_IOMUXC_GPIO1_IO07_GPIO1_IO7		0x84>,
+			   <MX8MN_IOMUXC_SD1_CLK_GPIO2_IO0		0x84>;
+	};
+
+	pinctrl_gpioled: gpioledgrp {
+		fsl,pins = <MX8MN_IOMUXC_GPIO1_IO00_GPIO1_IO0		0x84>,
+			   <MX8MN_IOMUXC_NAND_DQS_GPIO3_IO14		0x84>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <MX8MN_IOMUXC_I2C2_SCL_I2C2_SCL		0x400001C4>,
+			   <MX8MN_IOMUXC_I2C2_SDA_I2C2_SDA		0x400001C4>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <MX8MN_IOMUXC_I2C2_SCL_GPIO5_IO16		0x400001C4>,
+			   <MX8MN_IOMUXC_I2C2_SDA_GPIO5_IO17		0x400001C4>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <MX8MN_IOMUXC_I2C3_SCL_I2C3_SCL		0x400001C4>,
+			   <MX8MN_IOMUXC_I2C3_SDA_I2C3_SDA		0x400001C4>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins = <MX8MN_IOMUXC_I2C3_SCL_GPIO5_IO18		0x400001C4>,
+			   <MX8MN_IOMUXC_I2C3_SDA_GPIO5_IO19		0x400001C4>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <MX8MN_IOMUXC_GPIO1_IO14_PWM3_OUT		0x14>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <MX8MN_IOMUXC_GPIO1_IO15_PWM4_OUT		0x14>;
+	};
+
+	pinctrl_sai3: sai3grp {
+		fsl,pins = <MX8MN_IOMUXC_SAI3_MCLK_SAI3_MCLK		0x94>,
+			   <MX8MN_IOMUXC_SAI3_RXC_SAI3_RX_BCLK		0x94>,
+			   <MX8MN_IOMUXC_SAI3_RXFS_SAI3_RX_SYNC		0x94>,
+			   <MX8MN_IOMUXC_SAI3_RXD_SAI3_RX_DATA0		0x94>,
+			   <MX8MN_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC		0x94>,
+			   <MX8MN_IOMUXC_SAI3_TXD_SAI3_TX_DATA0		0x94>,
+			   <MX8MN_IOMUXC_SAI3_TXC_SAI3_TX_BCLK		0x94>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <MX8MN_IOMUXC_UART1_RXD_UART1_DCE_RX		0x16>,
+			   <MX8MN_IOMUXC_UART1_TXD_UART1_DCE_TX		0x16>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <MX8MN_IOMUXC_UART2_RXD_UART2_DCE_RX		0x16>,
+			   <MX8MN_IOMUXC_UART2_TXD_UART2_DCE_TX		0x16>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <MX8MN_IOMUXC_UART3_RXD_UART3_DCE_RX		0x16>,
+			   <MX8MN_IOMUXC_UART3_TXD_UART3_DCE_TX		0x16>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <MX8MN_IOMUXC_UART4_RXD_UART4_DCE_RX		0x16>,
+			   <MX8MN_IOMUXC_UART4_TXD_UART4_DCE_TX		0x16>;
+	};
+
+	pinctrl_usb0hub_sel: usb0hub-selgrp {
+		/* SEL_USB_HUB_B */
+		fsl,pins = <MX8MN_IOMUXC_SD1_CMD_GPIO2_IO1		0x84>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <MX8MN_IOMUXC_GPIO1_IO12_USB1_OTG_PWR	0x84>,
+			   <MX8MN_IOMUXC_GPIO1_IO13_USB1_OTG_OC		0x84>,
+			   <MX8MN_IOMUXC_GPIO1_IO10_USB1_OTG_ID		0x1C4>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK		0x1d4>,
+			   <MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d4>,
+			   <MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d4>,
+			   <MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d4>,
+			   <MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d4>,
+			   <MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d4>,
+			   <MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x84>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK		0x1d4>,
+			   <MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d4>,
+			   <MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d4>,
+			   <MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d4>,
+			   <MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d4>,
+			   <MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d4>,
+			   <MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x84>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK		0x1d4>,
+			   <MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d4>,
+			   <MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d4>,
+			   <MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d4>,
+			   <MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d4>,
+			   <MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d4>,
+			   <MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x84>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2-gpiogrp {
+		fsl,pins = <MX8MN_IOMUXC_SD2_CD_B_GPIO2_IO12		0x84>;
+	};
+};
diff --git a/dts/src/arm64/freescale/imx8mn-tqma8mqnl.dtsi b/dts/src/arm64/freescale/imx8mn-tqma8mqnl.dtsi
new file mode 100644
index 0000000000..9ea2894106
--- /dev/null
+++ b/dts/src/arm64/freescale/imx8mn-tqma8mqnl.dtsi
@@ -0,0 +1,322 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2020-2021 TQ-Systems GmbH
+ */
+
+#include "imx8mn.dtsi"
+
+/ {
+	model = "TQ-Systems i.MX8MN TQMa8MxNL";
+	compatible = "tq,imx8mn-tqma8mqnl", "fsl,imx8mn";
+
+	memory@40000000 {
+		device_type = "memory";
+		/*  our minimum RAM config will be 1024 MiB */
+		reg = <0x00000000 0x40000000 0 0x40000000>;
+	};
+
+	/* e-MMC IO, needed for HS modes */
+	reg_vcc1v8: regulator-vcc1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "TQMA8MXNL_VCC1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	reg_vcc3v3: regulator-vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "TQMA8MXNL_VCC3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* global autoconfigured region for contiguous allocations */
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			/* 640 MiB */
+			size = <0 0x28000000>;
+			/*  1024 - 128 MiB, our minimum RAM config will be 1024 MiB */
+			alloc-ranges = <0 0x40000000 0 0x78000000>;
+			linux,cma-default;
+		};
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&flexspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexspi>;
+	status = "okay";
+
+	flash0: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <84000000>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	sensor0: temperature-sensor-eeprom@1b {
+		compatible = "nxp,se97", "jedec,jc-42.4-temp";
+		reg = <0x1b>;
+	};
+
+	pca9450: pmic@25 {
+		compatible = "nxp,pca9450a";
+		reg = <0x25>;
+
+		/* PMIC PCA9450 PMIC_nINT GPIO1_IO08 */
+		pinctrl-0 = <&pinctrl_pmic>;
+		pinctrl-names = "default";
+		interrupt-parent = <&gpio1>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+
+		regulators {
+			/* V_0V85_SOC: 0.85 .. 0.95 */
+			buck1_reg: BUCK1 {
+				regulator-name = "BUCK1";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <950000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			/* VDD_ARM */
+			buck2_reg: BUCK2 {
+				regulator-name = "BUCK2";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-boot-on;
+				regulator-always-on;
+				nxp,dvs-run-voltage = <950000>;
+				nxp,dvs-standby-voltage = <850000>;
+				regulator-ramp-delay = <3125>;
+			};
+
+			/* V_0V85_GPU / DRAM: shall be equal to BUCK1 for i.MX8MN */
+			buck3_reg: BUCK3 {
+				regulator-name = "BUCK3";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <950000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			/* VCC3V3 -> VMMC, ... must not be changed */
+			buck4_reg: BUCK4 {
+				regulator-name = "BUCK4";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* V_1V8 -> VQMMC, SPI-NOR, ... must not be changed */
+			buck5_reg: BUCK5 {
+				regulator-name = "BUCK5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* V_1V1 -> RAM, ... must not be changed */
+			buck6_reg: BUCK6 {
+				regulator-name = "BUCK6";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* V_1V8_SNVS */
+			ldo1_reg: LDO1 {
+				regulator-name = "LDO1";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* V_0V8_SNVS */
+			ldo2_reg: LDO2 {
+				regulator-name = "LDO2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* V_1V8_ANA */
+			ldo3_reg: LDO3 {
+				regulator-name = "LDO3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* V_0V9_MIPI */
+			ldo4_reg: LDO4 {
+				regulator-name = "LDO4";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VCC SD IO - switched using SD2 VSELECT */
+			ldo5_reg: LDO5 {
+				regulator-name = "LDO5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+		};
+	};
+
+	pcf85063: rtc@51 {
+		compatible = "nxp,pcf85063a";
+		reg = <0x51>;
+		quartz-load-femtofarads = <7000>;
+	};
+
+	eeprom1: eeprom@53 {
+		compatible = "nxp,se97b", "atmel,24c02";
+		read-only;
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+
+	eeprom0: eeprom@57 {
+		compatible = "atmel,24c64";
+		reg = <0x57>;
+		pagesize = <32>;
+	};
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	no-sd;
+	no-sdio;
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc1v8>;
+	status = "okay";
+};
+
+/*
+ * Attention:
+ * wdog reset is routed to PMIC, PMIC must be preconfigured to force POR
+ * without LDO for SNVS. GPIO1_IO02 must not be used as GPIO.
+ */
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_flexspi: flexspigrp {
+		fsl,pins = <MX8MN_IOMUXC_NAND_ALE_QSPI_A_SCLK		0x84>,
+			   <MX8MN_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B	0x84>,
+			   <MX8MN_IOMUXC_NAND_DATA00_QSPI_A_DATA0	0x84>,
+			   <MX8MN_IOMUXC_NAND_DATA01_QSPI_A_DATA1	0x84>,
+			   <MX8MN_IOMUXC_NAND_DATA02_QSPI_A_DATA2	0x84>,
+			   <MX8MN_IOMUXC_NAND_DATA03_QSPI_A_DATA3	0x84>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <MX8MN_IOMUXC_I2C1_SCL_I2C1_SCL		0x400001c4>,
+			   <MX8MN_IOMUXC_I2C1_SDA_I2C1_SDA		0x400001c4>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins = <MX8MN_IOMUXC_I2C1_SCL_GPIO5_IO14	0x400001c4>,
+			   <MX8MN_IOMUXC_I2C1_SDA_GPIO5_IO15	0x400001c4>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <MX8MN_IOMUXC_GPIO1_IO08_GPIO1_IO8	0x84>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = <MX8MN_IOMUXC_SD2_RESET_B_GPIO2_IO19		0x84>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK		0x1d4>,
+			   <MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d2>,
+			   <MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d4>,
+			   <MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d4>,
+			   <MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d4>,
+			   <MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d4>,
+			   <MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d4>,
+			   <MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5	0x1d4>,
+			   <MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6	0x1d4>,
+			   <MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d4>,
+			   <MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE	0x84>,
+			   <MX8MN_IOMUXC_NAND_READY_B_USDHC3_RESET_B	0x84>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK		0x1d2>,
+			   <MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d2>,
+			   <MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d4>,
+			   <MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d4>,
+			   <MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d4>,
+			   <MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d4>,
+			   <MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d4>,
+			   <MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5	0x1d4>,
+			   <MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6	0x1d4>,
+			   <MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d4>,
+			   <MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE	0x84>,
+			   <MX8MN_IOMUXC_NAND_READY_B_USDHC3_RESET_B	0x84>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK		0x1d6>,
+			   <MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d2>,
+			   <MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d4>,
+			   <MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d4>,
+			   <MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d4>,
+			   <MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d4>,
+			   <MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d4>,
+			   <MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5	0x1d4>,
+			   <MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6	0x1d4>,
+			   <MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d4>,
+			   <MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE	0x84>,
+			   <MX8MN_IOMUXC_NAND_READY_B_USDHC3_RESET_B	0x84>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <MX8MN_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B	0x84>;
+	};
+};
diff --git a/dts/src/arm64/freescale/imx8mn.dtsi b/dts/src/arm64/freescale/imx8mn.dtsi
index da6c942fb7..b8d49d5f26 100644
--- a/dts/src/arm64/freescale/imx8mn.dtsi
+++ b/dts/src/arm64/freescale/imx8mn.dtsi
@@ -63,6 +63,12 @@
 			clock-latency = <61036>;
 			clocks = <&clk IMX8MN_CLK_ARM>;
 			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
 			next-level-cache = <&A53_L2>;
 			operating-points-v2 = <&a53_opp_table>;
 			nvmem-cells = <&cpu_speed_grade>;
@@ -78,6 +84,12 @@
 			clock-latency = <61036>;
 			clocks = <&clk IMX8MN_CLK_ARM>;
 			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
 			next-level-cache = <&A53_L2>;
 			operating-points-v2 = <&a53_opp_table>;
 			cpu-idle-states = <&cpu_pd_wait>;
@@ -91,6 +103,12 @@
 			clock-latency = <61036>;
 			clocks = <&clk IMX8MN_CLK_ARM>;
 			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
 			next-level-cache = <&A53_L2>;
 			operating-points-v2 = <&a53_opp_table>;
 			cpu-idle-states = <&cpu_pd_wait>;
@@ -104,6 +122,12 @@
 			clock-latency = <61036>;
 			clocks = <&clk IMX8MN_CLK_ARM>;
 			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
 			next-level-cache = <&A53_L2>;
 			operating-points-v2 = <&a53_opp_table>;
 			cpu-idle-states = <&cpu_pd_wait>;
@@ -112,6 +136,10 @@
 
 		A53_L2: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
+			cache-size = <0x80000>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
 		};
 	};
 
@@ -948,7 +976,6 @@
 				fsl,num-rx-queues = <3>;
 				nvmem-cells = <&fec_mac_address>;
 				nvmem-cell-names = "mac-address";
-				nvmem_macaddr_swap;
 				fsl,stop-mode = <&gpr 0x10 3>;
 				status = "disabled";
 			};
diff --git a/dts/src/arm64/freescale/imx8mp-evk.dts b/dts/src/arm64/freescale/imx8mp-evk.dts
index 7b99fad6e4..2eb9432106 100644
--- a/dts/src/arm64/freescale/imx8mp-evk.dts
+++ b/dts/src/arm64/freescale/imx8mp-evk.dts
@@ -86,6 +86,9 @@
 	pinctrl-0 = <&pinctrl_eqos>;
 	phy-mode = "rgmii-id";
 	phy-handle = <&ethphy0>;
+	snps,force_thresh_dma_mode;
+	snps,mtl-tx-config = <&mtl_tx_setup>;
+	snps,mtl-rx-config = <&mtl_rx_setup>;
 	status = "okay";
 
 	mdio {
@@ -97,6 +100,75 @@
 			compatible = "ethernet-phy-ieee802.3-c22";
 			reg = <1>;
 			eee-broken-1000t;
+			reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <80000>;
+			realtek,clkout-disable;
+		};
+	};
+
+	mtl_tx_setup: tx-queues-config {
+		snps,tx-queues-to-use = <5>;
+		snps,tx-sched-sp;
+
+		queue0 {
+			snps,dcb-algorithm;
+			snps,priority = <0x1>;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+			snps,priority = <0x2>;
+		};
+
+		queue2 {
+			snps,dcb-algorithm;
+			snps,priority = <0x4>;
+		};
+
+		queue3 {
+			snps,dcb-algorithm;
+			snps,priority = <0x8>;
+		};
+
+		queue4 {
+			snps,dcb-algorithm;
+			snps,priority = <0xf0>;
+		};
+	};
+
+	mtl_rx_setup: rx-queues-config {
+		snps,rx-queues-to-use = <5>;
+		snps,rx-sched-sp;
+
+		queue0 {
+			snps,dcb-algorithm;
+			snps,priority = <0x1>;
+			snps,map-to-dma-channel = <0>;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+			snps,priority = <0x2>;
+			snps,map-to-dma-channel = <1>;
+		};
+
+		queue2 {
+			snps,dcb-algorithm;
+			snps,priority = <0x4>;
+			snps,map-to-dma-channel = <2>;
+		};
+
+		queue3 {
+			snps,dcb-algorithm;
+			snps,priority = <0x8>;
+			snps,map-to-dma-channel = <3>;
+		};
+
+		queue4 {
+			snps,dcb-algorithm;
+			snps,priority = <0xf0>;
+			snps,map-to-dma-channel = <4>;
 		};
 	};
 };
@@ -120,6 +192,7 @@
 			reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
 			reset-assert-us = <10000>;
 			reset-deassert-us = <80000>;
+			realtek,clkout-disable;
 		};
 	};
 };
diff --git a/dts/src/arm64/freescale/imx8mp.dtsi b/dts/src/arm64/freescale/imx8mp.dtsi
index 04d259de56..6b840c05dd 100644
--- a/dts/src/arm64/freescale/imx8mp.dtsi
+++ b/dts/src/arm64/freescale/imx8mp.dtsi
@@ -51,6 +51,12 @@
 			clock-latency = <61036>;
 			clocks = <&clk IMX8MP_CLK_ARM>;
 			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
 			next-level-cache = <&A53_L2>;
 			#cooling-cells = <2>;
 		};
@@ -62,6 +68,12 @@
 			clock-latency = <61036>;
 			clocks = <&clk IMX8MP_CLK_ARM>;
 			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
 			next-level-cache = <&A53_L2>;
 			#cooling-cells = <2>;
 		};
@@ -73,6 +85,12 @@
 			clock-latency = <61036>;
 			clocks = <&clk IMX8MP_CLK_ARM>;
 			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
 			next-level-cache = <&A53_L2>;
 			#cooling-cells = <2>;
 		};
@@ -84,12 +102,22 @@
 			clock-latency = <61036>;
 			clocks = <&clk IMX8MP_CLK_ARM>;
 			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
 			next-level-cache = <&A53_L2>;
 			#cooling-cells = <2>;
 		};
 
 		A53_L2: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
+			cache-size = <0x80000>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
 		};
 	};
 
@@ -369,6 +397,10 @@
 				eth_mac1: mac-address@90 {
 					reg = <0x90 6>;
 				};
+
+				eth_mac2: mac-address@96 {
+					reg = <0x96 6>;
+				};
 			};
 
 			anatop: anatop@30360000 {
@@ -832,7 +864,6 @@
 				nvmem-cells = <&eth_mac1>;
 				nvmem-cell-names = "mac-address";
 				fsl,stop-mode = <&gpr 0x10 3>;
-				nvmem_macaddr_swap;
 				status = "disabled";
 			};
 
@@ -854,6 +885,8 @@
 							 <&clk IMX8MP_SYS_PLL2_100M>,
 							 <&clk IMX8MP_SYS_PLL2_125M>;
 				assigned-clock-rates = <0>, <100000000>, <125000000>;
+				nvmem-cells = <&eth_mac2>;
+				nvmem-cell-names = "mac-address";
 				intf_mode = <&gpr 0x4>;
 				status = "disabled";
 			};
diff --git a/dts/src/arm64/freescale/imx8mq-evk.dts b/dts/src/arm64/freescale/imx8mq-evk.dts
index b83df77195..a1b7582f3e 100644
--- a/dts/src/arm64/freescale/imx8mq-evk.dts
+++ b/dts/src/arm64/freescale/imx8mq-evk.dts
@@ -169,6 +169,11 @@
 			reg = <0>;
 			reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
 			reset-assert-us = <10000>;
+			qca,disable-smarteee;
+			vddio-supply = <&vddh>;
+
+			vddh: vddh-regulator {
+			};
 		};
 	};
 };
@@ -326,6 +331,10 @@
 	power-supply = <&sw1a_reg>;
 };
 
+&pgc_vpu {
+	power-supply = <&sw1c_reg>;
+};
+
 &qspi0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_qspi>;
diff --git a/dts/src/arm64/freescale/imx8mq-librem5-r3.dts b/dts/src/arm64/freescale/imx8mq-librem5-r3.dts
index cd3c3edd48..4533a84fb0 100644
--- a/dts/src/arm64/freescale/imx8mq-librem5-r3.dts
+++ b/dts/src/arm64/freescale/imx8mq-librem5-r3.dts
@@ -1,14 +1,9 @@
 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-// Copyright (C) 2020 Purism SPC <kernel@puri.sm>
+// Copyright (C) 2021 Purism SPC <kernel@puri.sm>
 
 /dts-v1/;
 
-#include "imx8mq-librem5.dtsi"
-
-/ {
-	model = "Purism Librem 5r3";
-	compatible = "purism,librem5r3", "purism,librem5", "fsl,imx8mq";
-};
+#include "imx8mq-librem5-r3.dtsi"
 
 &a53_opp_table {
 	opp-1000000000 {
@@ -16,22 +11,6 @@
 	};
 };
 
-&accel_gyro {
-	mount-matrix =  "1",  "0",  "0",
-			"0",  "1",  "0",
-			"0",  "0", "-1";
-};
-
-&bq25895 {
-	ti,battery-regulation-voltage = <4200000>; /* uV */
-	ti,charge-current = <1500000>; /* uA */
-	ti,termination-current = <144000>;  /* uA */
-};
-
 &buck3_reg {
 	regulator-always-on;
 };
-
-&proximity {
-	proximity-near-level = <25>;
-};
diff --git a/dts/src/arm64/freescale/imx8mq-librem5-r3.dtsi b/dts/src/arm64/freescale/imx8mq-librem5-r3.dtsi
new file mode 100644
index 0000000000..e4f8b47cce
--- /dev/null
+++ b/dts/src/arm64/freescale/imx8mq-librem5-r3.dtsi
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2021 Purism SPC <kernel@puri.sm>
+
+/dts-v1/;
+
+/*
+ * This file describes hardware that is shared among r3 ("Dogwood") and
+ * later revisions of the Librem 5 so it has to be included in dts there.
+ */
+
+#include "imx8mq-librem5.dtsi"
+
+/ {
+	model = "Purism Librem 5r3";
+	compatible = "purism,librem5r3", "purism,librem5", "fsl,imx8mq";
+};
+
+&accel_gyro {
+	mount-matrix =  "1",  "0",  "0",
+			"0",  "1",  "0",
+			"0",  "0", "-1";
+};
+
+&bq25895 {
+	ti,battery-regulation-voltage = <4200000>; /* uV */
+	ti,charge-current = <1500000>; /* uA */
+	ti,termination-current = <144000>;  /* uA */
+};
+
+&camera_front {
+	pinctrl-0 = <&pinctrl_csi1>, <&pinctrl_r3_camera_pwr>;
+	shutdown-gpios = <&gpio5 4 GPIO_ACTIVE_LOW>;
+};
+
+&iomuxc {
+	pinctrl_r3_camera_pwr: r3camerapwrgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SPDIF_RX_GPIO5_IO4		0x83
+		>;
+	};
+};
+
+&proximity {
+	proximity-near-level = <25>;
+};
diff --git a/dts/src/arm64/freescale/imx8mq-librem5-r4.dts b/dts/src/arm64/freescale/imx8mq-librem5-r4.dts
index cbfb49aa25..30d65bef69 100644
--- a/dts/src/arm64/freescale/imx8mq-librem5-r4.dts
+++ b/dts/src/arm64/freescale/imx8mq-librem5-r4.dts
@@ -1,31 +1,19 @@
 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-// Copyright (C) 2020 Purism SPC <kernel@puri.sm>
+// Copyright (C) 2021 Purism SPC <kernel@puri.sm>
 
 /dts-v1/;
 
-#include "imx8mq-librem5.dtsi"
+#include "imx8mq-librem5-r3.dtsi"
 
 / {
 	model = "Purism Librem 5r4";
 	compatible = "purism,librem5r4", "purism,librem5", "fsl,imx8mq";
 };
 
-&accel_gyro {
-	mount-matrix =  "1",  "0",  "0",
-			"0",  "1",  "0",
-			"0",  "0", "-1";
-};
-
 &bat {
 	maxim,rsns-microohm = <1667>;
 };
 
-&bq25895 {
-	ti,battery-regulation-voltage = <4200000>; /* uV */
-	ti,charge-current = <1500000>; /* uA */
-	ti,termination-current = <144000>;  /* uA */
-};
-
 &led_backlight {
 	led-max-microamp = <25000>;
 };
diff --git a/dts/src/arm64/freescale/imx8mq-librem5.dtsi b/dts/src/arm64/freescale/imx8mq-librem5.dtsi
index 60d47c7149..f3e3418f7e 100644
--- a/dts/src/arm64/freescale/imx8mq-librem5.dtsi
+++ b/dts/src/arm64/freescale/imx8mq-librem5.dtsi
@@ -14,6 +14,7 @@
 / {
 	model = "Purism Librem 5";
 	compatible = "purism,librem5", "fsl,imx8mq";
+	chassis-type = "handset";
 
 	backlight_dsi: backlight-dsi {
 		compatible = "led-backlight";
@@ -62,6 +63,40 @@
 		enable-active-high;
 	};
 
+	/*
+	 * the pinctrl for reg_csi_1v8 and reg_vcam_1v8 is added to the PMIC
+	 * since we can't have it twice in the 2 different regulator nodes.
+	 */
+	reg_csi_1v8: regulator-csi-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "CAMERA_VDDIO_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&reg_vdd_3v3>;
+		gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	/* controlled by the CAMERA_POWER_KEY HKS */
+	reg_vcam_1v2: regulator-vcam-1v2 {
+		compatible = "regulator-fixed";
+		regulator-name = "CAMERA_VDDD_1V2";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		vin-supply = <&reg_vdd_1v8>;
+		enable-active-high;
+	};
+
+	reg_vcam_2v8: regulator-vcam-2v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "CAMERA_VDDA_2V8";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		vin-supply = <&reg_vdd_3v3>;
+		gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
 	reg_gnss: regulator-gnss {
 		compatible = "regulator-fixed";
 		pinctrl-names = "default";
@@ -237,6 +272,10 @@
 	cpu-supply = <&buck2_reg>;
 };
 
+&csi1 {
+	status = "okay";
+};
+
 &ddrc {
 	operating-points-v2 = <&ddrc_opp_table>;
 
@@ -329,6 +368,20 @@
 		>;
 	};
 
+	pinctrl_camera_pwr: camerapwrgrp {
+		fsl,pins = <
+			/* CAMERA_PWR_EN_3V3 */
+			MX8MQ_IOMUXC_GPIO1_IO00_GPIO1_IO0	0x83
+		>;
+	};
+
+	pinctrl_csi1: csi1grp {
+		fsl,pins = <
+			/* CSI1_NRST */
+			MX8MQ_IOMUXC_ENET_RXC_GPIO1_IO25	0x83
+		>;
+	};
+
 	pinctrl_charger_in: chargeringrp {
 		fsl,pins = <
 			/* CHRG_INT */
@@ -725,7 +778,7 @@
 		compatible = "rohm,bd71837";
 		reg = <0x4b>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pmic>;
+		pinctrl-0 = <&pinctrl_pmic>, <&pinctrl_camera_pwr>;
 		clocks = <&pmic_osc>;
 		clock-names = "osc";
 		clock-output-names = "pmic_clk";
@@ -958,6 +1011,31 @@
 		>;
 	};
 
+	camera_front: camera@20 {
+		compatible = "hynix,hi846";
+		reg = <0x20>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_csi1>;
+		clocks = <&clk IMX8MQ_CLK_CLKO2>;
+		assigned-clocks = <&clk IMX8MQ_CLK_CLKO2>;
+		assigned-clock-rates = <25000000>;
+		reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+		vdda-supply = <&reg_vcam_2v8>;
+		vddd-supply = <&reg_vcam_1v2>;
+		vddio-supply = <&reg_csi_1v8>;
+		rotation = <90>;
+		orientation = <0>;
+
+		port {
+			camera1_ep: endpoint {
+				data-lanes = <1 2>;
+				link-frequencies = /bits/ 64
+					<80000000 200000000 300000000>;
+				remote-endpoint = <&mipi1_sensor_ep>;
+			};
+		};
+	};
+
 	backlight@36 {
 		compatible = "ti,lm36922";
 		reg = <0x36>;
@@ -1031,6 +1109,23 @@
 	status = "okay";
 };
 
+&mipi_csi1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	ports {
+		port@1 {
+			reg = <1>;
+
+			mipi1_sensor_ep: endpoint {
+				remote-endpoint = <&camera1_ep>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+};
+
 &mipi_dsi {
 	#address-cells = <1>;
 	#size-cells = <0>;
diff --git a/dts/src/arm64/freescale/imx8mq-mnt-reform2.dts b/dts/src/arm64/freescale/imx8mq-mnt-reform2.dts
index 4f2db6197b..fa721a13de 100644
--- a/dts/src/arm64/freescale/imx8mq-mnt-reform2.dts
+++ b/dts/src/arm64/freescale/imx8mq-mnt-reform2.dts
@@ -12,6 +12,7 @@
 / {
 	model = "MNT Reform 2";
 	compatible = "mntre,reform2", "boundary,imx8mq-nitrogen8m-som", "fsl,imx8mq";
+	chassis-type = "laptop";
 
 	pcie1_refclk: clock-pcie1-refclk {
 		compatible = "fixed-clock";
diff --git a/dts/src/arm64/freescale/imx8mq-nitrogen-som.dtsi b/dts/src/arm64/freescale/imx8mq-nitrogen-som.dtsi
index 36fc428ebe..395f77b5ac 100644
--- a/dts/src/arm64/freescale/imx8mq-nitrogen-som.dtsi
+++ b/dts/src/arm64/freescale/imx8mq-nitrogen-som.dtsi
@@ -69,6 +69,9 @@
 			reg = <4>;
 			interrupt-parent = <&gpio1>;
 			interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+			reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <300>;
 		};
 	};
 };
@@ -191,20 +194,20 @@
 			MX8MQ_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x1f
 			MX8MQ_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x1f
 			MX8MQ_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
-			MX8MQ_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91
+			MX8MQ_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0xd1
 			MX8MQ_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91
 			MX8MQ_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91
 			MX8MQ_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91
-			MX8MQ_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91
-			MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9		0x19
-			MX8MQ_IOMUXC_GPIO1_IO11_GPIO1_IO11		0x59
+			MX8MQ_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0xd1
+			MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9		0x1
+			MX8MQ_IOMUXC_GPIO1_IO11_GPIO1_IO11		0x41
 		>;
 	};
 
 	pinctrl_i2c1: i2c1grp {
 		fsl,pins = <
-			MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL			0x4000007f
-			MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA			0x4000007f
+			MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL			0x40000022
+			MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA			0x40000022
 		>;
 	};
 
diff --git a/dts/src/arm64/freescale/imx8mq-tqma8mq-mba8mx.dts b/dts/src/arm64/freescale/imx8mq-tqma8mq-mba8mx.dts
new file mode 100644
index 0000000000..d7660eab68
--- /dev/null
+++ b/dts/src/arm64/freescale/imx8mq-tqma8mq-mba8mx.dts
@@ -0,0 +1,349 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2019-2021 TQ-Systems GmbH
+ */
+
+/dts-v1/;
+
+#include "imx8mq-tqma8mq.dtsi"
+#include "mba8mx.dtsi"
+
+/ {
+	model = "TQ-Systems GmbH i.MX8MQ TQMa8MQ on MBa8Mx";
+	compatible = "tq,imx8mq-tqma8mq-mba8mx", "tq,imx8mq-tqma8mq", "fsl,imx8mq";
+
+	aliases {
+		eeprom0 = &eeprom3;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		rtc0 = &pcf85063;
+		rtc1 = &snvs_rtc;
+	};
+
+	extcon_usbotg: extcon-usbotg0 {
+		compatible = "linux,extcon-usb-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbcon0>;
+		id-gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+	};
+
+	pcie0_refclk: pcie0-refclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+
+	pcie1_refclk: pcie1-refclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+
+	reg_otg_vbus: regulator-otg-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_regotgvbus>;
+		regulator-name = "MBA8MQ_OTG_VBUS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usdhc2_vmmc: regulator-vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&btn2 {
+	gpios = <&gpio3 17 GPIO_ACTIVE_LOW>;
+};
+
+&gpio_leds {
+	led3 {
+		label = "led3";
+		gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&i2c1 {
+	expander2: gpio@25 {
+		compatible = "nxp,pca9555";
+		reg = <0x25>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		vcc-supply = <&reg_vcc_3v3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_expander>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		mpcie-rst-hog {
+			gpio-hog;
+			gpios = <13 0>;
+			output-high;
+			line-name = "MPCIE_RST#";
+		};
+	};
+};
+
+&irqsteer {
+	status = "okay";
+};
+
+&led2 {
+	gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+};
+
+&pcie0 {
+	reset-gpio = <&expander0 14 GPIO_ACTIVE_LOW>;
+	clocks = <&clk IMX8MQ_CLK_PCIE1_ROOT>,
+		 <&clk IMX8MQ_CLK_PCIE1_AUX>,
+		 <&clk IMX8MQ_CLK_PCIE1_PHY>,
+		 <&pcie0_refclk>;
+	clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus";
+	epdev_on-supply = <&reg_vcc_3v3>;
+	hard-wired = <1>;
+	status = "okay";
+};
+
+/*
+ * miniPCIe, also usable for cards with USB. Therefore configure the reset as
+ * static gpio hog.
+ */
+&pcie1 {
+	clocks = <&clk IMX8MQ_CLK_PCIE2_ROOT>,
+		 <&clk IMX8MQ_CLK_PCIE2_AUX>,
+		 <&clk IMX8MQ_CLK_PCIE2_PHY>,
+		 <&pcie1_refclk>;
+	clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus";
+	epdev_on-supply = <&reg_vcc_3v3>;
+	hard-wired = <1>;
+	status = "okay";
+};
+
+&sai3 {
+	assigned-clocks = <&clk IMX8MQ_CLK_SAI3>;
+	assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>;
+	clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3", "pll8k", "pll11k";
+	clocks = <&clk IMX8MQ_CLK_SAI3_IPG>, <&clk IMX8MQ_CLK_DUMMY>,
+		<&clk IMX8MQ_CLK_SAI3_ROOT>, <&clk IMX8MQ_CLK_DUMMY>,
+		<&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_AUDIO_PLL1_OUT>,
+		<&clk IMX8MQ_AUDIO_PLL2_OUT>;
+};
+
+&tlv320aic3x04 {
+	clock-names = "mclk";
+	clocks = <&clk IMX8MQ_CLK_SAI3_ROOT>;
+};
+
+&uart1 {
+	assigned-clocks = <&clk IMX8MQ_CLK_UART1>;
+	assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_80M>;
+};
+
+&uart2 {
+	assigned-clocks = <&clk IMX8MQ_CLK_UART2>;
+	assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_80M>;
+};
+
+/* console */
+&uart3 {
+	assigned-clocks = <&clk IMX8MQ_CLK_UART3>;
+	assigned-clock-parents = <&clk IMX8MQ_CLK_25M>;
+};
+
+&usb3_phy0 {
+	vbus-supply = <&reg_otg_vbus>;
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	/* we implement dual role but not full featured OTG */
+	extcon = <&extcon_usbotg>;
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+	/* OC not supported due to non matching active polarity */
+	disable-over-current;
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb3_phy1 {
+	status = "okay";
+};
+
+&usb_dwc3_1 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <MX8MQ_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK	0x0000004e>,
+			   <MX8MQ_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI	0x0000004e>,
+			   <MX8MQ_IOMUXC_ECSPI1_MISO_ECSPI1_MISO	0x0000004e>,
+			   <MX8MQ_IOMUXC_ECSPI1_SS0_GPIO5_IO9		0x0000004e>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <MX8MQ_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK	0x0000004e>,
+			   <MX8MQ_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI	0x0000004e>,
+			   <MX8MQ_IOMUXC_ECSPI2_MISO_ECSPI2_MISO	0x0000004e>,
+			   <MX8MQ_IOMUXC_ECSPI2_SS0_GPIO5_IO13		0x0000004e>;
+	};
+
+	pinctrl_expander: expandergrp {
+		fsl,pins = <MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9		0xd6>;
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC		0x3>,
+			   <MX8MQ_IOMUXC_ENET_MDIO_ENET1_MDIO		0x23>,
+			   <MX8MQ_IOMUXC_ENET_TD3_ENET1_RGMII_TD3	0x1f>,
+			   <MX8MQ_IOMUXC_ENET_TD2_ENET1_RGMII_TD2	0x1f>,
+			   <MX8MQ_IOMUXC_ENET_TD1_ENET1_RGMII_TD1	0x1f>,
+			   <MX8MQ_IOMUXC_ENET_TD0_ENET1_RGMII_TD0	0x1f>,
+			   <MX8MQ_IOMUXC_ENET_RD3_ENET1_RGMII_RD3	0x91>,
+			   <MX8MQ_IOMUXC_ENET_RD2_ENET1_RGMII_RD2	0x91>,
+			   <MX8MQ_IOMUXC_ENET_RD1_ENET1_RGMII_RD1	0x91>,
+			   <MX8MQ_IOMUXC_ENET_RD0_ENET1_RGMII_RD0	0x91>,
+			   <MX8MQ_IOMUXC_ENET_TXC_ENET1_RGMII_TXC	0x1f>,
+			   <MX8MQ_IOMUXC_ENET_RXC_ENET1_RGMII_RXC	0x91>,
+			   <MX8MQ_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91>,
+			   <MX8MQ_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f>;
+	};
+
+	pinctrl_gpiobutton: gpiobuttongrp {
+		fsl,pins = <MX8MQ_IOMUXC_GPIO1_IO05_GPIO1_IO5		0x41>,
+			   <MX8MQ_IOMUXC_GPIO1_IO07_GPIO1_IO7		0x41>,
+			   <MX8MQ_IOMUXC_NAND_WE_B_GPIO3_IO17		0x41>;
+	};
+
+	pinctrl_gpioled: gpioledgrp {
+		fsl,pins = <MX8MQ_IOMUXC_GPIO1_IO00_GPIO1_IO0		0x41>,
+			   <MX8MQ_IOMUXC_GPIO1_IO08_GPIO1_IO8		0x41>,
+			   <MX8MQ_IOMUXC_NAND_READY_B_GPIO3_IO16	0x41>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <MX8MQ_IOMUXC_I2C2_SCL_I2C2_SCL		0x40000067>,
+			   <MX8MQ_IOMUXC_I2C2_SDA_I2C2_SDA		0x40000067>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <MX8MQ_IOMUXC_I2C2_SCL_GPIO5_IO16		0x40000067>,
+			   <MX8MQ_IOMUXC_I2C2_SDA_GPIO5_IO17		0x40000067>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <MX8MQ_IOMUXC_I2C3_SCL_I2C3_SCL		0x40000067>,
+			   <MX8MQ_IOMUXC_I2C3_SDA_I2C3_SDA		0x40000067>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins = <MX8MQ_IOMUXC_I2C3_SCL_GPIO5_IO18		0x40000067>,
+			   <MX8MQ_IOMUXC_I2C3_SDA_GPIO5_IO19		0x40000067>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <MX8MQ_IOMUXC_GPIO1_IO14_PWM3_OUT		0x16>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <MX8MQ_IOMUXC_GPIO1_IO15_PWM4_OUT		0x16>;
+	};
+
+	pinctrl_regotgvbus: reggotgvbusgrp {
+		/* USB1 OTG PWR as GPIO */
+		fsl,pins = <MX8MQ_IOMUXC_GPIO1_IO12_GPIO1_IO12		0x06>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = <MX8MQ_IOMUXC_SD2_RESET_B_GPIO2_IO19		0xc1>;
+	};
+
+	pinctrl_sai3: sai3grp {
+		fsl,pins = <MX8MQ_IOMUXC_SAI3_MCLK_SAI3_MCLK		0xd6>,
+			   <MX8MQ_IOMUXC_SAI3_RXC_SAI3_RX_BCLK		0xd6>,
+			   <MX8MQ_IOMUXC_SAI3_RXFS_SAI3_RX_SYNC		0xd6>,
+			   <MX8MQ_IOMUXC_SAI3_RXD_SAI3_RX_DATA0		0xd6>,
+			   <MX8MQ_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC		0xd6>,
+			   <MX8MQ_IOMUXC_SAI3_TXD_SAI3_TX_DATA0		0xd6>,
+			   <MX8MQ_IOMUXC_SAI3_TXC_SAI3_TX_BCLK		0xd6>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX		0x79>,
+			   <MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX		0x79>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <MX8MQ_IOMUXC_UART2_RXD_UART2_DCE_RX		0x79>,
+			   <MX8MQ_IOMUXC_UART2_TXD_UART2_DCE_TX		0x79>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <MX8MQ_IOMUXC_UART3_RXD_UART3_DCE_RX		0x79>,
+			   <MX8MQ_IOMUXC_UART3_TXD_UART3_DCE_TX		0x79>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <MX8MQ_IOMUXC_UART4_RXD_UART4_DCE_RX		0x79>,
+			   <MX8MQ_IOMUXC_UART4_TXD_UART4_DCE_TX		0x79>;
+	};
+
+	pinctrl_usbcon0: usb0congrp {
+		/* ID: floating / high: device, low: host -> use PU */
+		fsl,pins = <MX8MQ_IOMUXC_GPIO1_IO10_GPIO1_IO10		0xe6>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK		0x83>,
+			   <MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD		0xc3>,
+			   <MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0		0xc3>,
+			   <MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1		0xc3>,
+			   <MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2		0xc3>,
+			   <MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3		0xc3>,
+			   <MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0xc1>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK		0x85>,
+			   <MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD		0xc5>,
+			   <MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0		0xc5>,
+			   <MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1		0xc5>,
+			   <MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2		0xc5>,
+			   <MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3		0xc5>,
+			   <MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0xc1>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK		0x9f>,
+			   <MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD		0xc7>,
+			   <MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0		0xc7>,
+			   <MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1		0xc7>,
+			   <MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2		0xc7>,
+			   <MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3		0xc7>,
+			   <MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0xc1>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2-gpiogrp {
+		fsl,pins = <MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12		0x41>;
+	};
+};
diff --git a/dts/src/arm64/freescale/imx8mq-tqma8mq.dtsi b/dts/src/arm64/freescale/imx8mq-tqma8mq.dtsi
new file mode 100644
index 0000000000..8aedcddfea
--- /dev/null
+++ b/dts/src/arm64/freescale/imx8mq-tqma8mq.dtsi
@@ -0,0 +1,360 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2019-2021 TQ-Systems GmbH
+ */
+
+#include "imx8mq.dtsi"
+
+/ {
+	model = "TQ-Systems GmbH i.MX8MQ TQMa8MQ";
+	compatible = "tq,imx8mq-tqma8mq", "fsl,imx8mq";
+
+	memory@40000000 {
+		device_type = "memory";
+		/*  our minimum RAM config will be 1024 MiB */
+		reg = <0x00000000 0x40000000 0 0x40000000>;
+	};
+
+	/* e-MMC IO, needed for HS modes */
+	reg_vcc1v8: regulator-vcc1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "TQMA8MX_VCC1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	reg_vcc3v3: regulator-vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "TQMA8MX_VCC3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_vdd_arm: regulator-vdd-arm {
+		compatible = "regulator-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_dvfs>;
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <1000000>;
+		regulator-name = "TQMa8Mx_DVFS";
+		regulator-type = "voltage";
+		regulator-settling-time-us = <150000>;
+		gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+		states = <900000 0x1 1000000 0x0>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* global autoconfigured region for contiguous allocations */
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			/* 640 MiB */
+			size = <0 0x28000000>;
+			/*  1024 - 128 MiB, our minimum RAM config will be 1024 MiB */
+			alloc-ranges = <0 0x40000000 0 0x78000000>;
+			linux,cma-default;
+		};
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&A53_1 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&A53_2 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&A53_3 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&gpu {
+	status = "okay";
+};
+
+&pgc_gpu {
+	power-supply = <&sw1a_reg>;
+};
+
+&pgc_vpu {
+	power-supply = <&sw1c_reg>;
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	pfuze100: pmic@8 {
+		compatible = "fsl,pfuze100";
+		fsl,pfuze-support-disable-sw;
+		reg = <0x8>;
+
+		regulators {
+			/* VDD_GPU */
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <825000>;
+				regulator-max-microvolt = <1100000>;
+			};
+
+			/* VDD_VPU */
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <825000>;
+				regulator-max-microvolt = <1100000>;
+			};
+
+			/* NVCC_DRAM */
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+			};
+
+			/* VDD_DRAM */
+			sw3a_reg: sw3ab {
+				regulator-min-microvolt = <825000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+			};
+
+			/* 1.8 V for QSPI NOR, e-MMC IO, must not be changed */
+			nvcc_1v8_reg: sw4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-always-on;
+			};
+
+			/* not used */
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			/* VDD_PHY_0V9 */
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <975000>;
+				regulator-always-on;
+			};
+
+			/* VDD_PHY_1V8 */
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1675000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-always-on;
+			};
+
+			/* VDDA_1V8 */
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1625000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-always-on;
+			};
+
+			/* VDD_PHY_3V3 */
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <3075000>;
+				regulator-max-microvolt = <3625000>;
+				regulator-always-on;
+			};
+
+			/* not used */
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+		};
+	};
+
+	sensor0: temperature-sensor-eeprom@1b {
+		compatible = "nxp,se97", "jedec,jc-42.4-temp";
+		reg = <0x1b>;
+	};
+
+	pcf85063: rtc@51 {
+		compatible = "nxp,pcf85063a";
+		reg = <0x51>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc>;
+		interrupt-names = "irq";
+		interrupt-parent = <&gpio1>;
+		interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+		quartz-load-femtofarads = <7000>;
+
+		clock {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+
+	eeprom1: eeprom@53 {
+		compatible = "nxp,se97b", "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+		read-only;
+	};
+
+	eeprom0: eeprom@57 {
+		compatible = "atmel,24c64";
+		reg = <0x57>;
+		pagesize = <32>;
+	};
+};
+
+&pcie0 {
+	/* 3.3V supply, only way to switch on internal 1.8V supply using GPR */
+	vph-supply = <&vgen5_reg>;
+};
+
+&pcie1 {
+	/* 3.3V supply, only way to switch on internal 1.8V supply using GPR */
+	vph-supply = <&vgen5_reg>;
+};
+
+&qspi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_qspi>;
+	assigned-clocks = <&clk IMX8MQ_CLK_QSPI>;
+	assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_266M>;
+	status = "okay";
+
+	flash0: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <84000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+	};
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	no-sd;
+	no-sdio;
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc1v8>;
+	status = "okay";
+};
+
+&vpu {
+	status = "okay";
+};
+
+/* Attention: wdog reset forcing POR needs baseboard support */
+&wdog1 {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_dvfs: dvfsgrp {
+		fsl,pins = <MX8MQ_IOMUXC_GPIO1_IO06_GPIO1_IO6	0x16>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL		0x4000007f>,
+			   <MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA		0x4000007f>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins = <MX8MQ_IOMUXC_I2C1_SCL_GPIO5_IO14		0x40000074>,
+			   <MX8MQ_IOMUXC_I2C1_SDA_GPIO5_IO15		0x40000074>;
+	};
+
+	pinctrl_qspi: qspigrp {
+		fsl,pins = <MX8MQ_IOMUXC_NAND_ALE_QSPI_A_SCLK		0x97>,
+			   <MX8MQ_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B	0x82>,
+			   <MX8MQ_IOMUXC_NAND_DATA00_QSPI_A_DATA0	0x97>,
+			   <MX8MQ_IOMUXC_NAND_DATA01_QSPI_A_DATA1	0x97>,
+			   <MX8MQ_IOMUXC_NAND_DATA02_QSPI_A_DATA2	0x97>,
+			   <MX8MQ_IOMUXC_NAND_DATA03_QSPI_A_DATA3	0x97>;
+	};
+
+	pinctrl_rtc: rtcgrp {
+		fsl,pins = <MX8MQ_IOMUXC_GPIO1_IO01_GPIO1_IO1		0x41>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK		0x83>,
+			   <MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD		0xc3>,
+			   <MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xc3>,
+			   <MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xc3>,
+			   <MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xc3>,
+			   <MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xc3>,
+			   <MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4		0xc3>,
+			   <MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5		0xc3>,
+			   <MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6		0xc3>,
+			   <MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7		0xc3>,
+			   <MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE	0x83>,
+			   <MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B	0xc1>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK		0x85>,
+			   <MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD		0xc5>,
+			   <MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xc5>,
+			   <MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xc5>,
+			   <MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xc5>,
+			   <MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xc5>,
+			   <MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4		0xc5>,
+			   <MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5		0xc5>,
+			   <MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6		0xc5>,
+			   <MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7		0xc5>,
+			   <MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE	0x85>,
+			   <MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B	0xc1>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK		0x87>,
+			   <MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD		0xc7>,
+			   <MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xc7>,
+			   <MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xc7>,
+			   <MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xc7>,
+			   <MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xc7>,
+			   <MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4		0xc7>,
+			   <MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5		0xc7>,
+			   <MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6		0xc7>,
+			   <MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7		0xc7>,
+			   <MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE	0x87>,
+			   <MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B	0xc1>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B	0xc6>;
+	};
+};
diff --git a/dts/src/arm64/freescale/imx8mq.dtsi b/dts/src/arm64/freescale/imx8mq.dtsi
index 71bf497f99..2df2510d01 100644
--- a/dts/src/arm64/freescale/imx8mq.dtsi
+++ b/dts/src/arm64/freescale/imx8mq.dtsi
@@ -102,6 +102,12 @@
 			clock-latency = <61036>; /* two CLK32 periods */
 			clocks = <&clk IMX8MQ_CLK_ARM>;
 			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
 			next-level-cache = <&A53_L2>;
 			operating-points-v2 = <&a53_opp_table>;
 			#cooling-cells = <2>;
@@ -116,6 +122,12 @@
 			clock-latency = <61036>; /* two CLK32 periods */
 			clocks = <&clk IMX8MQ_CLK_ARM>;
 			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
 			next-level-cache = <&A53_L2>;
 			operating-points-v2 = <&a53_opp_table>;
 			#cooling-cells = <2>;
@@ -128,6 +140,12 @@
 			clock-latency = <61036>; /* two CLK32 periods */
 			clocks = <&clk IMX8MQ_CLK_ARM>;
 			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
 			next-level-cache = <&A53_L2>;
 			operating-points-v2 = <&a53_opp_table>;
 			#cooling-cells = <2>;
@@ -140,6 +158,12 @@
 			clock-latency = <61036>; /* two CLK32 periods */
 			clocks = <&clk IMX8MQ_CLK_ARM>;
 			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
 			next-level-cache = <&A53_L2>;
 			operating-points-v2 = <&a53_opp_table>;
 			#cooling-cells = <2>;
@@ -147,6 +171,10 @@
 
 		A53_L2: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
+			cache-size = <0x100000>;
+			cache-line-size = <64>;
+			cache-sets = <1024>;
 		};
 	};
 
@@ -429,49 +457,49 @@
 				clocks = <&clk IMX8MQ_CLK_TMU_ROOT>;
 				little-endian;
 				fsl,tmu-range = <0xb0000 0xa0026 0x80048 0x70061>;
-				fsl,tmu-calibration = <0x00000000 0x00000023
-						       0x00000001 0x00000029
-						       0x00000002 0x0000002f
-						       0x00000003 0x00000035
-						       0x00000004 0x0000003d
-						       0x00000005 0x00000043
-						       0x00000006 0x0000004b
-						       0x00000007 0x00000051
-						       0x00000008 0x00000057
-						       0x00000009 0x0000005f
-						       0x0000000a 0x00000067
-						       0x0000000b 0x0000006f
-
-						       0x00010000 0x0000001b
-						       0x00010001 0x00000023
-						       0x00010002 0x0000002b
-						       0x00010003 0x00000033
-						       0x00010004 0x0000003b
-						       0x00010005 0x00000043
-						       0x00010006 0x0000004b
-						       0x00010007 0x00000055
-						       0x00010008 0x0000005d
-						       0x00010009 0x00000067
-						       0x0001000a 0x00000070
-
-						       0x00020000 0x00000017
-						       0x00020001 0x00000023
-						       0x00020002 0x0000002d
-						       0x00020003 0x00000037
-						       0x00020004 0x00000041
-						       0x00020005 0x0000004b
-						       0x00020006 0x00000057
-						       0x00020007 0x00000063
-						       0x00020008 0x0000006f
-
-						       0x00030000 0x00000015
-						       0x00030001 0x00000021
-						       0x00030002 0x0000002d
-						       0x00030003 0x00000039
-						       0x00030004 0x00000045
-						       0x00030005 0x00000053
-						       0x00030006 0x0000005f
-						       0x00030007 0x00000071>;
+				fsl,tmu-calibration = <0x00000000 0x00000023>,
+						      <0x00000001 0x00000029>,
+						      <0x00000002 0x0000002f>,
+						      <0x00000003 0x00000035>,
+						      <0x00000004 0x0000003d>,
+						      <0x00000005 0x00000043>,
+						      <0x00000006 0x0000004b>,
+						      <0x00000007 0x00000051>,
+						      <0x00000008 0x00000057>,
+						      <0x00000009 0x0000005f>,
+						      <0x0000000a 0x00000067>,
+						      <0x0000000b 0x0000006f>,
+
+						      <0x00010000 0x0000001b>,
+						      <0x00010001 0x00000023>,
+						      <0x00010002 0x0000002b>,
+						      <0x00010003 0x00000033>,
+						      <0x00010004 0x0000003b>,
+						      <0x00010005 0x00000043>,
+						      <0x00010006 0x0000004b>,
+						      <0x00010007 0x00000055>,
+						      <0x00010008 0x0000005d>,
+						      <0x00010009 0x00000067>,
+						      <0x0001000a 0x00000070>,
+
+						      <0x00020000 0x00000017>,
+						      <0x00020001 0x00000023>,
+						      <0x00020002 0x0000002d>,
+						      <0x00020003 0x00000037>,
+						      <0x00020004 0x00000041>,
+						      <0x00020005 0x0000004b>,
+						      <0x00020006 0x00000057>,
+						      <0x00020007 0x00000063>,
+						      <0x00020008 0x0000006f>,
+
+						      <0x00030000 0x00000015>,
+						      <0x00030001 0x00000021>,
+						      <0x00030002 0x0000002d>,
+						      <0x00030003 0x00000039>,
+						      <0x00030004 0x00000045>,
+						      <0x00030005 0x00000053>,
+						      <0x00030006 0x0000005f>,
+						      <0x00030007 0x00000071>;
 				#thermal-sensor-cells =  <1>;
 			};
 
@@ -1290,7 +1318,6 @@
 				fsl,num-rx-queues = <3>;
 				nvmem-cells = <&fec_mac_address>;
 				nvmem-cell-names = "mac-address";
-				nvmem_macaddr_swap;
 				fsl,stop-mode = <&iomuxc_gpr 0x10 3>;
 				status = "disabled";
 			};
diff --git a/dts/src/arm64/freescale/imx8qm.dtsi b/dts/src/arm64/freescale/imx8qm.dtsi
index aebbe2b84a..4a7c017b5f 100644
--- a/dts/src/arm64/freescale/imx8qm.dtsi
+++ b/dts/src/arm64/freescale/imx8qm.dtsi
@@ -57,6 +57,12 @@
 			compatible = "arm,cortex-a53", "arm,armv8";
 			reg = <0x0 0x0>;
 			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
 			next-level-cache = <&A53_L2>;
 		};
 
@@ -65,6 +71,12 @@
 			compatible = "arm,cortex-a53", "arm,armv8";
 			reg = <0x0 0x1>;
 			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
 			next-level-cache = <&A53_L2>;
 		};
 
@@ -73,6 +85,12 @@
 			compatible = "arm,cortex-a53", "arm,armv8";
 			reg = <0x0 0x2>;
 			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
 			next-level-cache = <&A53_L2>;
 		};
 
@@ -81,6 +99,12 @@
 			compatible = "arm,cortex-a53", "arm,armv8";
 			reg = <0x0 0x3>;
 			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
 			next-level-cache = <&A53_L2>;
 		};
 
@@ -89,6 +113,12 @@
 			compatible = "arm,cortex-a72", "arm,armv8";
 			reg = <0x0 0x100>;
 			enable-method = "psci";
+			i-cache-size = <0xC000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
 			next-level-cache = <&A72_L2>;
 		};
 
@@ -102,10 +132,18 @@
 
 		A53_L2: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
+			cache-size = <0x100000>;
+			cache-line-size = <64>;
+			cache-sets = <1024>;
 		};
 
 		A72_L2: l2-cache1 {
 			compatible = "cache";
+			cache-level = <2>;
+			cache-size = <0x100000>;
+			cache-line-size = <64>;
+			cache-sets = <1024>;
 		};
 	};
 
diff --git a/dts/src/arm64/freescale/imx8qxp.dtsi b/dts/src/arm64/freescale/imx8qxp.dtsi
index 617618edf7..dbec7c106e 100644
--- a/dts/src/arm64/freescale/imx8qxp.dtsi
+++ b/dts/src/arm64/freescale/imx8qxp.dtsi
@@ -58,6 +58,12 @@
 			compatible = "arm,cortex-a35";
 			reg = <0x0 0x0>;
 			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
 			next-level-cache = <&A35_L2>;
 			clocks = <&clk IMX_SC_R_A35 IMX_SC_PM_CLK_CPU>;
 			operating-points-v2 = <&a35_opp_table>;
@@ -69,6 +75,12 @@
 			compatible = "arm,cortex-a35";
 			reg = <0x0 0x1>;
 			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
 			next-level-cache = <&A35_L2>;
 			clocks = <&clk IMX_SC_R_A35 IMX_SC_PM_CLK_CPU>;
 			operating-points-v2 = <&a35_opp_table>;
@@ -80,6 +92,12 @@
 			compatible = "arm,cortex-a35";
 			reg = <0x0 0x2>;
 			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
 			next-level-cache = <&A35_L2>;
 			clocks = <&clk IMX_SC_R_A35 IMX_SC_PM_CLK_CPU>;
 			operating-points-v2 = <&a35_opp_table>;
@@ -91,6 +109,12 @@
 			compatible = "arm,cortex-a35";
 			reg = <0x0 0x3>;
 			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
 			next-level-cache = <&A35_L2>;
 			clocks = <&clk IMX_SC_R_A35 IMX_SC_PM_CLK_CPU>;
 			operating-points-v2 = <&a35_opp_table>;
@@ -99,6 +123,10 @@
 
 		A35_L2: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
+			cache-size = <0x80000>;
+			cache-line-size = <64>;
+			cache-sets = <1024>;
 		};
 	};
 
diff --git a/dts/src/arm64/freescale/imx8ulp-evk.dts b/dts/src/arm64/freescale/imx8ulp-evk.dts
new file mode 100644
index 0000000000..33e84c4e9e
--- /dev/null
+++ b/dts/src/arm64/freescale/imx8ulp-evk.dts
@@ -0,0 +1,64 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2021 NXP
+ */
+
+/dts-v1/;
+
+#include "imx8ulp.dtsi"
+
+/ {
+	model = "NXP i.MX8ULP EVK";
+	compatible = "fsl,imx8ulp-evk", "fsl,imx8ulp";
+
+	chosen {
+		stdout-path = &lpuart5;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0 0x80000000>;
+	};
+};
+
+&lpuart5 {
+	/* console */
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_lpuart5>;
+	pinctrl-1 = <&pinctrl_lpuart5>;
+	status = "okay";
+};
+
+&usdhc0 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc0>;
+	pinctrl-1 = <&pinctrl_usdhc0>;
+	non-removable;
+	bus-width = <8>;
+	status = "okay";
+};
+
+&iomuxc1 {
+	pinctrl_lpuart5: lpuart5grp {
+		fsl,pins = <
+			MX8ULP_PAD_PTF14__LPUART5_TX	0x3
+			MX8ULP_PAD_PTF15__LPUART5_RX	0x3
+		>;
+	};
+
+	pinctrl_usdhc0: usdhc0grp {
+		fsl,pins = <
+			MX8ULP_PAD_PTD1__SDHC0_CMD	0x43
+			MX8ULP_PAD_PTD2__SDHC0_CLK	0x10042
+			MX8ULP_PAD_PTD10__SDHC0_D0	0x43
+			MX8ULP_PAD_PTD9__SDHC0_D1	0x43
+			MX8ULP_PAD_PTD8__SDHC0_D2	0x43
+			MX8ULP_PAD_PTD7__SDHC0_D3	0x43
+			MX8ULP_PAD_PTD6__SDHC0_D4	0x43
+			MX8ULP_PAD_PTD5__SDHC0_D5	0x43
+			MX8ULP_PAD_PTD4__SDHC0_D6	0x43
+			MX8ULP_PAD_PTD3__SDHC0_D7	0x43
+			MX8ULP_PAD_PTD11__SDHC0_DQS	0x10042
+		>;
+	};
+};
diff --git a/dts/src/arm64/freescale/imx8ulp-pinfunc.h b/dts/src/arm64/freescale/imx8ulp-pinfunc.h
new file mode 100755
index 0000000000..b204ac79b4
--- /dev/null
+++ b/dts/src/arm64/freescale/imx8ulp-pinfunc.h
@@ -0,0 +1,978 @@
+/* SPDX-License-Identifier: GPL-2.0+ OR MIT */
+/*
+ * Copyright 2021 NXP
+ */
+
+#ifndef __DTS_IMX8ULP_PINFUNC_H
+#define __DTS_IMX8ULP_PINFUNC_H
+
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg input_reg mux_mode input_val>
+ */
+#define MX8ULP_PAD_PTD0__PTD0                                        0x0000 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTD0__I2S6_RX_BCLK                                0x0000 0x0B44 0x7 0x1
+#define MX8ULP_PAD_PTD0__SDHC0_RESET_B                               0x0000 0x0000 0x8 0x0
+#define MX8ULP_PAD_PTD0__FLEXSPI2_B_DQS                              0x0000 0x0974 0x9 0x1
+#define MX8ULP_PAD_PTD0__CLKOUT2                                     0x0000 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTD0__EPDC0_SDCLK_B                               0x0000 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTD0__LP_APD_DBG_MUX_0                            0x0000 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTD0__CLKOUT1                                     0x0000 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTD0__DEBUG_MUX0_0                                0x0000 0x0000 0xe 0x0
+#define MX8ULP_PAD_PTD0__DEBUG_MUX1_0                                0x0000 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTD1__PTD1                                        0x0004 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTD1__I2S6_RX_FS                                  0x0004 0x0B48 0x7 0x1
+#define MX8ULP_PAD_PTD1__SDHC0_CMD                                   0x0004 0x0000 0x8 0x0
+#define MX8ULP_PAD_PTD1__FLEXSPI2_B_DATA7                            0x0004 0x0970 0x9 0x1
+#define MX8ULP_PAD_PTD1__EPDC0_SDCLK                                 0x0004 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTD1__DPI0_PCLK                                   0x0004 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTD1__LP_APD_DBG_MUX_1                            0x0004 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTD1__DEBUG_MUX0_1                                0x0004 0x0000 0xe 0x0
+#define MX8ULP_PAD_PTD1__DEBUG_MUX1_1                                0x0004 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTD2__PTD2                                        0x0008 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTD2__I2S6_RXD0                                   0x0008 0x0B34 0x7 0x1
+#define MX8ULP_PAD_PTD2__SDHC0_CLK                                   0x0008 0x0000 0x8 0x0
+#define MX8ULP_PAD_PTD2__FLEXSPI2_B_DATA6                            0x0008 0x096C 0x9 0x1
+#define MX8ULP_PAD_PTD2__EPDC0_SDLE                                  0x0008 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTD2__DPI0_HSYNC                                  0x0008 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTD2__LP_APD_DBG_MUX_2                            0x0008 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTD2__DEBUG_MUX0_2                                0x0008 0x0000 0xe 0x0
+#define MX8ULP_PAD_PTD2__DEBUG_MUX1_2                                0x0008 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTD3__PTD3                                        0x000C 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTD3__I2S6_RXD1                                   0x000C 0x0B38 0x7 0x1
+#define MX8ULP_PAD_PTD3__SDHC0_D7                                    0x000C 0x0000 0x8 0x0
+#define MX8ULP_PAD_PTD3__FLEXSPI2_B_DATA5                            0x000C 0x0968 0x9 0x1
+#define MX8ULP_PAD_PTD3__EPDC0_GDSP                                  0x000C 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTD3__DPI0_VSYNC                                  0x000C 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTD3__LP_APD_DBG_MUX_3                            0x000C 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTD3__DEBUG_MUX0_3                                0x000C 0x0000 0xe 0x0
+#define MX8ULP_PAD_PTD3__DEBUG_MUX1_3                                0x000C 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTD4__PTD4                                        0x0010 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTD4__EXT_AUD_MCLK3                               0x0010 0x0B14 0x4 0x1
+#define MX8ULP_PAD_PTD4__SDHC0_VS                                    0x0010 0x0000 0x5 0x0
+#define MX8ULP_PAD_PTD4__TPM8_CH5                                    0x0010 0x0B2C 0x6 0x1
+#define MX8ULP_PAD_PTD4__I2S6_MCLK                                   0x0010 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTD4__SDHC0_D6                                    0x0010 0x0000 0x8 0x0
+#define MX8ULP_PAD_PTD4__FLEXSPI2_B_DATA4                            0x0010 0x0964 0x9 0x1
+#define MX8ULP_PAD_PTD4__EPDC0_SDCE0                                 0x0010 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTD4__DPI0_DE                                     0x0010 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTD4__LP_APD_DBG_MUX_4                            0x0010 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTD4__DEBUG_MUX0_4                                0x0010 0x0000 0xe 0x0
+#define MX8ULP_PAD_PTD4__DEBUG_MUX1_4                                0x0010 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTD5__PTD5                                        0x0014 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTD5__SDHC0_CD                                    0x0014 0x0000 0x5 0x0
+#define MX8ULP_PAD_PTD5__TPM8_CH4                                    0x0014 0x0B28 0x6 0x1
+#define MX8ULP_PAD_PTD5__I2S6_TX_BCLK                                0x0014 0x0B4C 0x7 0x1
+#define MX8ULP_PAD_PTD5__SDHC0_D5                                    0x0014 0x0000 0x8 0x0
+#define MX8ULP_PAD_PTD5__FLEXSPI2_B_SS0_B                            0x0014 0x0000 0x9 0x0
+#define MX8ULP_PAD_PTD5__FLEXSPI2_B_SCLK_B                           0x0014 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTD5__EPDC0_D0                                    0x0014 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTD5__DPI0_D0                                     0x0014 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTD5__LP_APD_DBG_MUX_5                            0x0014 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTD5__DEBUG_MUX0_5                                0x0014 0x0000 0xe 0x0
+#define MX8ULP_PAD_PTD5__DEBUG_MUX1_5                                0x0014 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTD6__PTD6                                        0x0018 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTD6__SDHC0_WP                                    0x0018 0x0000 0x5 0x0
+#define MX8ULP_PAD_PTD6__TPM8_CH3                                    0x0018 0x0B24 0x6 0x1
+#define MX8ULP_PAD_PTD6__I2S6_TX_FS                                  0x0018 0x0B50 0x7 0x1
+#define MX8ULP_PAD_PTD6__SDHC0_D4                                    0x0018 0x0000 0x8 0x0
+#define MX8ULP_PAD_PTD6__FLEXSPI2_B_SCLK                             0x0018 0x0978 0x9 0x1
+#define MX8ULP_PAD_PTD6__EPDC0_D1                                    0x0018 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTD6__DPI0_D1                                     0x0018 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTD6__LP_APD_DBG_MUX_6                            0x0018 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTD6__DEBUG_MUX0_6                                0x0018 0x0000 0xe 0x0
+#define MX8ULP_PAD_PTD6__DEBUG_MUX1_6                                0x0018 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTD7__PTD7                                        0x001C 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTD7__TPM8_CH2                                    0x001C 0x0B20 0x6 0x1
+#define MX8ULP_PAD_PTD7__I2S6_TXD0                                   0x001C 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTD7__SDHC0_D3                                    0x001C 0x0000 0x8 0x0
+#define MX8ULP_PAD_PTD7__FLEXSPI2_B_DATA3                            0x001C 0x0960 0x9 0x1
+#define MX8ULP_PAD_PTD7__EPDC0_D2                                    0x001C 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTD7__DPI0_D2                                     0x001C 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTD7__LP_APD_DBG_MUX_7                            0x001C 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTD7__DEBUG_MUX0_7                                0x001C 0x0000 0xe 0x0
+#define MX8ULP_PAD_PTD7__DEBUG_MUX1_7                                0x001C 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTD8__PTD8                                        0x0020 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTD8__TPM8_CH1                                    0x0020 0x0B1C 0x6 0x1
+#define MX8ULP_PAD_PTD8__I2S6_TXD1                                   0x0020 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTD8__SDHC0_D2                                    0x0020 0x0000 0x8 0x0
+#define MX8ULP_PAD_PTD8__FLEXSPI2_B_DATA2                            0x0020 0x095C 0x9 0x1
+#define MX8ULP_PAD_PTD8__EPDC0_D3                                    0x0020 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTD8__DPI0_D3                                     0x0020 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTD8__LP_APD_DBG_MUX_8                            0x0020 0x0000 0xe 0x0
+#define MX8ULP_PAD_PTD8__DEBUG_MUX1_8                                0x0020 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTD9__PTD9                                        0x0024 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTD9__TPM8_CLKIN                                  0x0024 0x0B30 0x6 0x1
+#define MX8ULP_PAD_PTD9__I2S6_TXD2                                   0x0024 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTD9__SDHC0_D1                                    0x0024 0x0000 0x8 0x0
+#define MX8ULP_PAD_PTD9__FLEXSPI2_B_DATA1                            0x0024 0x0958 0x9 0x1
+#define MX8ULP_PAD_PTD9__EPDC0_D4                                    0x0024 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTD9__DPI0_D4                                     0x0024 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTD9__LP_APD_DBG_MUX_9                            0x0024 0x0000 0xe 0x0
+#define MX8ULP_PAD_PTD9__DEBUG_MUX1_9                                0x0024 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTD10__PTD10                                      0x0028 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTD10__TPM8_CH0                                   0x0028 0x0B18 0x6 0x1
+#define MX8ULP_PAD_PTD10__I2S6_TXD3                                  0x0028 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTD10__SDHC0_D0                                   0x0028 0x0000 0x8 0x0
+#define MX8ULP_PAD_PTD10__FLEXSPI2_B_DATA0                           0x0028 0x0954 0x9 0x1
+#define MX8ULP_PAD_PTD10__EPDC0_D5                                   0x0028 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTD10__DPI0_D5                                    0x0028 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTD10__LP_APD_DBG_MUX_10                          0x0028 0x0000 0xe 0x0
+#define MX8ULP_PAD_PTD10__DEBUG_MUX1_10                              0x0028 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTD11__PTD11                                      0x002C 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTD11__TPM8_CH5                                   0x002C 0x0B2C 0x6 0x2
+#define MX8ULP_PAD_PTD11__I2S6_RXD2                                  0x002C 0x0B3C 0x7 0x1
+#define MX8ULP_PAD_PTD11__SDHC0_DQS                                  0x002C 0x0000 0x8 0x0
+#define MX8ULP_PAD_PTD11__FLEXSPI2_B_SS0_B                           0x002C 0x0000 0x9 0x0
+#define MX8ULP_PAD_PTD11__FLEXSPI2_A_SS1_B                           0x002C 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTD11__EPDC0_D6                                   0x002C 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTD11__DPI0_D6                                    0x002C 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTD11__LP_APD_DBG_MUX_11                          0x002C 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTD12__PTD12                                      0x0030 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTD12__USB0_ID                                    0x0030 0x0AC8 0x5 0x1
+#define MX8ULP_PAD_PTD12__SDHC2_D3                                   0x0030 0x0AA4 0x6 0x1
+#define MX8ULP_PAD_PTD12__I2S7_RX_BCLK                               0x0030 0x0B64 0x7 0x1
+#define MX8ULP_PAD_PTD12__SDHC1_DQS                                  0x0030 0x0A84 0x8 0x1
+#define MX8ULP_PAD_PTD12__FLEXSPI2_A_SS0_B                           0x0030 0x0000 0x9 0x0
+#define MX8ULP_PAD_PTD12__FLEXSPI2_B_SS1_B                           0x0030 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTD12__EPDC0_D7                                   0x0030 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTD12__DPI0_D7                                    0x0030 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTD12__LP_APD_DBG_MUX_12                          0x0030 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTD13__PTD13                                      0x0034 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTD13__SPDIF_IN3                                  0x0034 0x0B80 0x4 0x1
+#define MX8ULP_PAD_PTD13__USB0_PWR                                   0x0034 0x0000 0x5 0x0
+#define MX8ULP_PAD_PTD13__SDHC2_D2                                   0x0034 0x0AA0 0x6 0x1
+#define MX8ULP_PAD_PTD13__I2S7_RX_FS                                 0x0034 0x0B68 0x7 0x1
+#define MX8ULP_PAD_PTD13__SDHC1_RESET_B                              0x0034 0x0000 0x8 0x0
+#define MX8ULP_PAD_PTD13__FLEXSPI2_A_SCLK                            0x0034 0x0000 0x9 0x0
+#define MX8ULP_PAD_PTD13__CLKOUT2                                    0x0034 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTD13__EPDC0_D8                                   0x0034 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTD13__DPI0_D8                                    0x0034 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTD13__CLKOUT1                                    0x0034 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTD13__LP_APD_DBG_MUX_13                          0x0034 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTD14__PTD14                                      0x0038 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTD14__SPDIF_OUT3                                 0x0038 0x0000 0x4 0x0
+#define MX8ULP_PAD_PTD14__USB0_OC                                    0x0038 0x0AC0 0x5 0x1
+#define MX8ULP_PAD_PTD14__SDHC2_D1                                   0x0038 0x0A9C 0x6 0x1
+#define MX8ULP_PAD_PTD14__I2S7_RXD0                                  0x0038 0x0B54 0x7 0x1
+#define MX8ULP_PAD_PTD14__SDHC1_D7                                   0x0038 0x0A80 0x8 0x1
+#define MX8ULP_PAD_PTD14__FLEXSPI2_A_DATA3                           0x0038 0x0000 0x9 0x0
+#define MX8ULP_PAD_PTD14__TRACE0_D7                                  0x0038 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTD14__EPDC0_D9                                   0x0038 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTD14__DPI0_D9                                    0x0038 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTD14__LP_APD_DBG_MUX_14                          0x0038 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTD15__PTD15                                      0x003C 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTD15__SPDIF_IN2                                  0x003C 0x0B7C 0x4 0x1
+#define MX8ULP_PAD_PTD15__SDHC1_VS                                   0x003C 0x0000 0x5 0x0
+#define MX8ULP_PAD_PTD15__SDHC2_D0                                   0x003C 0x0A98 0x6 0x1
+#define MX8ULP_PAD_PTD15__I2S7_TX_BCLK                               0x003C 0x0B6C 0x7 0x1
+#define MX8ULP_PAD_PTD15__SDHC1_D6                                   0x003C 0x0A7C 0x8 0x1
+#define MX8ULP_PAD_PTD15__FLEXSPI2_A_DATA2                           0x003C 0x0000 0x9 0x0
+#define MX8ULP_PAD_PTD15__TRACE0_D6                                  0x003C 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTD15__EPDC0_D10                                  0x003C 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTD15__DPI0_D10                                   0x003C 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTD15__LP_APD_DBG_MUX_15                          0x003C 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTD16__PTD16                                      0x0040 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTD16__FXIO1_D31                                  0x0040 0x08A0 0x2 0x1
+#define MX8ULP_PAD_PTD16__LPSPI4_PCS1                                0x0040 0x08F8 0x3 0x1
+#define MX8ULP_PAD_PTD16__SPDIF_OUT2                                 0x0040 0x0000 0x4 0x0
+#define MX8ULP_PAD_PTD16__SDHC1_CD                                   0x0040 0x0A58 0x5 0x1
+#define MX8ULP_PAD_PTD16__SDHC2_CLK                                  0x0040 0x0A90 0x6 0x1
+#define MX8ULP_PAD_PTD16__I2S7_TX_FS                                 0x0040 0x0B70 0x7 0x1
+#define MX8ULP_PAD_PTD16__SDHC1_D5                                   0x0040 0x0A78 0x8 0x1
+#define MX8ULP_PAD_PTD16__FLEXSPI2_A_DATA1                           0x0040 0x0000 0x9 0x0
+#define MX8ULP_PAD_PTD16__TRACE0_D5                                  0x0040 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTD16__EPDC0_D11                                  0x0040 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTD16__DPI0_D11                                   0x0040 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTD16__LP_APD_DBG_MUX_16                          0x0040 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTD17__PTD17                                      0x0044 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTD17__FXIO1_D30                                  0x0044 0x089C 0x2 0x1
+#define MX8ULP_PAD_PTD17__LPSPI4_PCS2                                0x0044 0x08FC 0x3 0x1
+#define MX8ULP_PAD_PTD17__EXT_AUD_MCLK3                              0x0044 0x0B14 0x4 0x2
+#define MX8ULP_PAD_PTD17__SDHC1_WP                                   0x0044 0x0A88 0x5 0x1
+#define MX8ULP_PAD_PTD17__SDHC2_CMD                                  0x0044 0x0A94 0x6 0x1
+#define MX8ULP_PAD_PTD17__I2S7_TXD0                                  0x0044 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTD17__SDHC1_D4                                   0x0044 0x0A74 0x8 0x1
+#define MX8ULP_PAD_PTD17__FLEXSPI2_A_DATA0                           0x0044 0x0000 0x9 0x0
+#define MX8ULP_PAD_PTD17__TRACE0_D4                                  0x0044 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTD17__EPDC0_D12                                  0x0044 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTD17__DPI0_D12                                   0x0044 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTD17__LP_APD_DBG_MUX_17                          0x0044 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTD18__PTD18                                      0x0048 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTD18__FXIO1_D29                                  0x0048 0x0894 0x2 0x1
+#define MX8ULP_PAD_PTD18__LPSPI4_PCS3                                0x0048 0x0900 0x3 0x1
+#define MX8ULP_PAD_PTD18__SPDIF_CLK                                  0x0048 0x0000 0x4 0x0
+#define MX8ULP_PAD_PTD18__EXT_AUD_MCLK3                              0x0048 0x0B14 0x5 0x3
+#define MX8ULP_PAD_PTD18__TPM8_CH0                                   0x0048 0x0B18 0x6 0x2
+#define MX8ULP_PAD_PTD18__I2S7_MCLK                                  0x0048 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTD18__SDHC1_D3                                   0x0048 0x0A70 0x8 0x1
+#define MX8ULP_PAD_PTD18__FLEXSPI2_A_DQS                             0x0048 0x0000 0x9 0x0
+#define MX8ULP_PAD_PTD18__TRACE0_D3                                  0x0048 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTD18__EPDC0_D13                                  0x0048 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTD18__DPI0_D13                                   0x0048 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTD18__LP_APD_DBG_MUX_18                          0x0048 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTD19__PTD19                                      0x004C 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTD19__FXIO1_D28                                  0x004C 0x0890 0x2 0x1
+#define MX8ULP_PAD_PTD19__SPDIF_IN0                                  0x004C 0x0B74 0x4 0x1
+#define MX8ULP_PAD_PTD19__TPM8_CH1                                   0x004C 0x0B1C 0x6 0x2
+#define MX8ULP_PAD_PTD19__I2S6_RXD3                                  0x004C 0x0B40 0x7 0x1
+#define MX8ULP_PAD_PTD19__SDHC1_D2                                   0x004C 0x0A6C 0x8 0x1
+#define MX8ULP_PAD_PTD19__FLEXSPI2_A_DATA7                           0x004C 0x0000 0x9 0x0
+#define MX8ULP_PAD_PTD19__TRACE0_D2                                  0x004C 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTD19__EPDC0_D14                                  0x004C 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTD19__DPI0_D14                                   0x004C 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTD19__LP_APD_DBG_MUX_19                          0x004C 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTD20__PTD20                                      0x0050 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTD20__FXIO1_D27                                  0x0050 0x088C 0x2 0x1
+#define MX8ULP_PAD_PTD20__LPSPI4_SIN                                 0x0050 0x0908 0x3 0x1
+#define MX8ULP_PAD_PTD20__SPDIF_OUT0                                 0x0050 0x0000 0x4 0x0
+#define MX8ULP_PAD_PTD20__TPM8_CLKIN                                 0x0050 0x0B30 0x6 0x2
+#define MX8ULP_PAD_PTD20__I2S7_RXD1                                  0x0050 0x0B58 0x7 0x1
+#define MX8ULP_PAD_PTD20__SDHC1_D1                                   0x0050 0x0A68 0x8 0x1
+#define MX8ULP_PAD_PTD20__FLEXSPI2_A_DATA6                           0x0050 0x0000 0x9 0x0
+#define MX8ULP_PAD_PTD20__TRACE0_D1                                  0x0050 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTD20__EPDC0_D15                                  0x0050 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTD20__DPI0_D15                                   0x0050 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTD20__LP_APD_DBG_MUX_20                          0x0050 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTD21__PTD21                                      0x0054 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTD21__FXIO1_D26                                  0x0054 0x0888 0x2 0x1
+#define MX8ULP_PAD_PTD21__LPSPI4_SOUT                                0x0054 0x090C 0x3 0x1
+#define MX8ULP_PAD_PTD21__SPDIF_IN1                                  0x0054 0x0B78 0x4 0x1
+#define MX8ULP_PAD_PTD21__USB1_PWR                                   0x0054 0x0000 0x5 0x0
+#define MX8ULP_PAD_PTD21__TPM8_CH2                                   0x0054 0x0B20 0x6 0x2
+#define MX8ULP_PAD_PTD21__I2S7_TXD1                                  0x0054 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTD21__SDHC1_D0                                   0x0054 0x0A64 0x8 0x1
+#define MX8ULP_PAD_PTD21__FLEXSPI2_A_DATA5                           0x0054 0x0000 0x9 0x0
+#define MX8ULP_PAD_PTD21__TRACE0_D0                                  0x0054 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTD21__DPI0_D16                                   0x0054 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTD21__WDOG5_RST                                  0x0054 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTD21__LP_APD_DBG_MUX_21                          0x0054 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTD22__PTD22                                      0x0058 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTD22__FXIO1_D25                                  0x0058 0x0884 0x2 0x1
+#define MX8ULP_PAD_PTD22__LPSPI4_SCK                                 0x0058 0x0904 0x3 0x1
+#define MX8ULP_PAD_PTD22__SPDIF_OUT1                                 0x0058 0x0000 0x4 0x0
+#define MX8ULP_PAD_PTD22__USB1_OC                                    0x0058 0x0AC4 0x5 0x1
+#define MX8ULP_PAD_PTD22__TPM8_CH3                                   0x0058 0x0B24 0x6 0x2
+#define MX8ULP_PAD_PTD22__I2S7_TXD2                                  0x0058 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTD22__SDHC1_CLK                                  0x0058 0x0A5C 0x8 0x1
+#define MX8ULP_PAD_PTD22__FLEXSPI2_A_DATA4                           0x0058 0x0000 0x9 0x0
+#define MX8ULP_PAD_PTD22__TRACE0_CLKOUT                              0x0058 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTD22__DPI0_D17                                   0x0058 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTD22__LP_APD_DBG_MUX_22                          0x0058 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTD23__PTD23                                      0x005C 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTD23__FXIO1_D24                                  0x005C 0x0880 0x2 0x1
+#define MX8ULP_PAD_PTD23__LPSPI4_PCS0                                0x005C 0x08F4 0x3 0x1
+#define MX8ULP_PAD_PTD23__USB1_ID                                    0x005C 0x0ACC 0x5 0x1
+#define MX8ULP_PAD_PTD23__TPM8_CH4                                   0x005C 0x0B28 0x6 0x2
+#define MX8ULP_PAD_PTD23__I2S7_TXD3                                  0x005C 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTD23__SDHC1_CMD                                  0x005C 0x0A60 0x8 0x1
+#define MX8ULP_PAD_PTD23__FLEXSPI2_A_SS0_B                           0x005C 0x0000 0x9 0x0
+#define MX8ULP_PAD_PTD23__FLEXSPI2_A_SCLK_B                          0x005C 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTD23__DPI0_D18                                   0x005C 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTD23__LP_APD_DBG_MUX_23                          0x005C 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTE0__PTE0                                        0x0080 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTE0__FXIO1_D23                                   0x0080 0x087C 0x2 0x1
+#define MX8ULP_PAD_PTE0__SPDIF_IN3                                   0x0080 0x0B80 0x3 0x2
+#define MX8ULP_PAD_PTE0__LPUART4_CTS_B                               0x0080 0x08DC 0x4 0x1
+#define MX8ULP_PAD_PTE0__LPI2C4_SCL                                  0x0080 0x08C8 0x5 0x1
+#define MX8ULP_PAD_PTE0__TPM8_CLKIN                                  0x0080 0x0B30 0x6 0x3
+#define MX8ULP_PAD_PTE0__I2S7_RXD2                                   0x0080 0x0B5C 0x7 0x1
+#define MX8ULP_PAD_PTE0__SDHC2_D1                                    0x0080 0x0A9C 0x8 0x2
+#define MX8ULP_PAD_PTE0__FLEXSPI2_B_DQS                              0x0080 0x0974 0x9 0x2
+#define MX8ULP_PAD_PTE0__ENET0_CRS                                   0x0080 0x0AE8 0xa 0x1
+#define MX8ULP_PAD_PTE0__DBI0_WRX                                    0x0080 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTE0__DPI0_D19                                    0x0080 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTE0__WUU1_P0                                     0x0080 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTE0__DEBUG_MUX0_8                                0x0080 0x0000 0xe 0x0
+#define MX8ULP_PAD_PTE0__DEBUG_MUX1_11                               0x0080 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTE1__PTE1                                        0x0084 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTE1__FXIO1_D22                                   0x0084 0x0878 0x2 0x1
+#define MX8ULP_PAD_PTE1__SPDIF_OUT3                                  0x0084 0x0000 0x3 0x0
+#define MX8ULP_PAD_PTE1__LPUART4_RTS_B                               0x0084 0x0000 0x4 0x0
+#define MX8ULP_PAD_PTE1__LPI2C4_SDA                                  0x0084 0x08CC 0x5 0x1
+#define MX8ULP_PAD_PTE1__TPM8_CH0                                    0x0084 0x0B18 0x6 0x3
+#define MX8ULP_PAD_PTE1__I2S7_RXD3                                   0x0084 0x0B60 0x7 0x1
+#define MX8ULP_PAD_PTE1__SDHC2_D0                                    0x0084 0x0A98 0x8 0x2
+#define MX8ULP_PAD_PTE1__FLEXSPI2_B_DATA7                            0x0084 0x0970 0x9 0x2
+#define MX8ULP_PAD_PTE1__ENET0_COL                                   0x0084 0x0AE4 0xa 0x1
+#define MX8ULP_PAD_PTE1__DBI0_CSX                                    0x0084 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTE1__DPI0_D20                                    0x0084 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTE1__WUU1_P1                                     0x0084 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTE1__DEBUG_MUX0_9                                0x0084 0x0000 0xe 0x0
+#define MX8ULP_PAD_PTE1__DEBUG_MUX1_12                               0x0084 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTE2__PTE2                                        0x0088 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTE2__FXIO1_D21                                   0x0088 0x0874 0x2 0x1
+#define MX8ULP_PAD_PTE2__SPDIF_IN2                                   0x0088 0x0B7C 0x3 0x2
+#define MX8ULP_PAD_PTE2__LPUART4_TX                                  0x0088 0x08E4 0x4 0x1
+#define MX8ULP_PAD_PTE2__LPI2C4_HREQ                                 0x0088 0x08C4 0x5 0x1
+#define MX8ULP_PAD_PTE2__TPM8_CH1                                    0x0088 0x0B1C 0x6 0x3
+#define MX8ULP_PAD_PTE2__EXT_AUD_MCLK3                               0x0088 0x0B14 0x7 0x4
+#define MX8ULP_PAD_PTE2__SDHC2_CLK                                   0x0088 0x0A90 0x8 0x2
+#define MX8ULP_PAD_PTE2__FLEXSPI2_B_DATA6                            0x0088 0x096C 0x9 0x2
+#define MX8ULP_PAD_PTE2__ENET0_TXER                                  0x0088 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTE2__DBI0_DCX                                    0x0088 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTE2__DPI0_D21                                    0x0088 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTE2__LP_HV_DBG_MUX_0                             0x0088 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTE2__DEBUG_MUX0_10                               0x0088 0x0000 0xe 0x0
+#define MX8ULP_PAD_PTE2__DEBUG_MUX1_13                               0x0088 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTE3__PTE3                                        0x008C 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTE3__FXIO1_D20                                   0x008C 0x0870 0x2 0x1
+#define MX8ULP_PAD_PTE3__SPDIF_OUT2                                  0x008C 0x0000 0x3 0x0
+#define MX8ULP_PAD_PTE3__LPUART4_RX                                  0x008C 0x08E0 0x4 0x1
+#define MX8ULP_PAD_PTE3__TPM8_CH2                                    0x008C 0x0B20 0x6 0x3
+#define MX8ULP_PAD_PTE3__I2S6_MCLK                                   0x008C 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTE3__SDHC2_CMD                                   0x008C 0x0A94 0x8 0x2
+#define MX8ULP_PAD_PTE3__FLEXSPI2_B_DATA5                            0x008C 0x0968 0x9 0x2
+#define MX8ULP_PAD_PTE3__ENET0_TXCLK                                 0x008C 0x0B10 0xa 0x1
+#define MX8ULP_PAD_PTE3__DBI0_RWX                                    0x008C 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTE3__DPI0_D22                                    0x008C 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTE3__WUU1_P2                                     0x008C 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTE3__DEBUG_MUX0_11                               0x008C 0x0000 0xe 0x0
+#define MX8ULP_PAD_PTE3__DEBUG_MUX1_14                               0x008C 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTE4__PTE4                                        0x0090 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTE4__FXIO1_D19                                   0x0090 0x0868 0x2 0x1
+#define MX8ULP_PAD_PTE4__SPDIF_CLK                                   0x0090 0x0000 0x3 0x0
+#define MX8ULP_PAD_PTE4__LPUART5_CTS_B                               0x0090 0x08E8 0x4 0x1
+#define MX8ULP_PAD_PTE4__LPI2C5_SCL                                  0x0090 0x08D4 0x5 0x1
+#define MX8ULP_PAD_PTE4__TPM8_CH3                                    0x0090 0x0B24 0x6 0x3
+#define MX8ULP_PAD_PTE4__I2S6_RX_BCLK                                0x0090 0x0B44 0x7 0x2
+#define MX8ULP_PAD_PTE4__SDHC2_D3                                    0x0090 0x0AA4 0x8 0x2
+#define MX8ULP_PAD_PTE4__FLEXSPI2_B_DATA4                            0x0090 0x0964 0x9 0x2
+#define MX8ULP_PAD_PTE4__ENET0_TXD3                                  0x0090 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTE4__DBI0_E                                      0x0090 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTE4__DPI0_D23                                    0x0090 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTE4__WUU1_P3                                     0x0090 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTE4__DEBUG_MUX0_12                               0x0090 0x0000 0xe 0x0
+#define MX8ULP_PAD_PTE4__DEBUG_MUX1_15                               0x0090 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTE5__PTE5                                        0x0094 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTE5__FXIO1_D18                                   0x0094 0x0864 0x2 0x1
+#define MX8ULP_PAD_PTE5__SPDIF_IN0                                   0x0094 0x0B74 0x3 0x2
+#define MX8ULP_PAD_PTE5__LPUART5_RTS_B                               0x0094 0x0000 0x4 0x0
+#define MX8ULP_PAD_PTE5__LPI2C5_SDA                                  0x0094 0x08D8 0x5 0x1
+#define MX8ULP_PAD_PTE5__TPM8_CH4                                    0x0094 0x0B28 0x6 0x3
+#define MX8ULP_PAD_PTE5__I2S6_RX_FS                                  0x0094 0x0B48 0x7 0x2
+#define MX8ULP_PAD_PTE5__SDHC2_D2                                    0x0094 0x0AA0 0x8 0x2
+#define MX8ULP_PAD_PTE5__FLEXSPI2_B_SS0_B                            0x0094 0x0000 0x9 0x0
+#define MX8ULP_PAD_PTE5__ENET0_TXD2                                  0x0094 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTE5__DBI0_D0                                     0x0094 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTE5__LP_HV_DBG_MUX_1                             0x0094 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTE5__DEBUG_MUX0_13                               0x0094 0x0000 0xe 0x0
+#define MX8ULP_PAD_PTE5__DEBUG_MUX1_16                               0x0094 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTE6__PTE6                                        0x0098 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTE6__FXIO1_D17                                   0x0098 0x0860 0x2 0x1
+#define MX8ULP_PAD_PTE6__SPDIF_OUT0                                  0x0098 0x0000 0x3 0x0
+#define MX8ULP_PAD_PTE6__LPUART5_TX                                  0x0098 0x08F0 0x4 0x1
+#define MX8ULP_PAD_PTE6__LPI2C5_HREQ                                 0x0098 0x08D0 0x5 0x1
+#define MX8ULP_PAD_PTE6__TPM8_CH5                                    0x0098 0x0B2C 0x6 0x3
+#define MX8ULP_PAD_PTE6__I2S6_RXD0                                   0x0098 0x0B34 0x7 0x2
+#define MX8ULP_PAD_PTE6__SDHC2_D4                                    0x0098 0x0AA8 0x8 0x1
+#define MX8ULP_PAD_PTE6__FLEXSPI2_B_SCLK                             0x0098 0x0978 0x9 0x2
+#define MX8ULP_PAD_PTE6__ENET0_RXCLK                                 0x0098 0x0B0C 0xa 0x1
+#define MX8ULP_PAD_PTE6__DBI0_D1                                     0x0098 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTE6__LP_HV_DBG_MUX_2                             0x0098 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTE6__WDOG5_RST                                   0x0098 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTE6__DEBUG_MUX0_14                               0x0098 0x0000 0xe 0x0
+#define MX8ULP_PAD_PTE6__DEBUG_MUX1_17                               0x0098 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTE7__PTE7                                        0x009C 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTE7__FXIO1_D16                                   0x009C 0x085C 0x2 0x1
+#define MX8ULP_PAD_PTE7__SPDIF_IN1                                   0x009C 0x0B78 0x3 0x2
+#define MX8ULP_PAD_PTE7__LPUART5_RX                                  0x009C 0x08EC 0x4 0x1
+#define MX8ULP_PAD_PTE7__LPI2C6_HREQ                                 0x009C 0x09B4 0x5 0x1
+#define MX8ULP_PAD_PTE7__TPM4_CLKIN                                  0x009C 0x081C 0x6 0x1
+#define MX8ULP_PAD_PTE7__I2S6_RXD1                                   0x009C 0x0B38 0x7 0x2
+#define MX8ULP_PAD_PTE7__SDHC2_D5                                    0x009C 0x0AAC 0x8 0x1
+#define MX8ULP_PAD_PTE7__FLEXSPI2_B_DATA3                            0x009C 0x0960 0x9 0x2
+#define MX8ULP_PAD_PTE7__ENET0_RXD3                                  0x009C 0x0B04 0xa 0x1
+#define MX8ULP_PAD_PTE7__DBI0_D2                                     0x009C 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTE7__EPDC0_BDR1                                  0x009C 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTE7__WUU1_P4                                     0x009C 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTE7__DEBUG_MUX0_15                               0x009C 0x0000 0xe 0x0
+#define MX8ULP_PAD_PTE7__DEBUG_MUX1_18                               0x009C 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTE8__PTE8                                        0x00A0 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTE8__FXIO1_D15                                   0x00A0 0x0858 0x2 0x1
+#define MX8ULP_PAD_PTE8__LPSPI4_PCS1                                 0x00A0 0x08F8 0x3 0x2
+#define MX8ULP_PAD_PTE8__LPUART6_CTS_B                               0x00A0 0x09CC 0x4 0x1
+#define MX8ULP_PAD_PTE8__LPI2C6_SCL                                  0x00A0 0x09B8 0x5 0x1
+#define MX8ULP_PAD_PTE8__TPM4_CH0                                    0x00A0 0x0804 0x6 0x1
+#define MX8ULP_PAD_PTE8__I2S6_RXD2                                   0x00A0 0x0B3C 0x7 0x2
+#define MX8ULP_PAD_PTE8__SDHC2_D6                                    0x00A0 0x0AB0 0x8 0x1
+#define MX8ULP_PAD_PTE8__FLEXSPI2_B_DATA2                            0x00A0 0x095C 0x9 0x2
+#define MX8ULP_PAD_PTE8__ENET0_RXD2                                  0x00A0 0x0B00 0xa 0x1
+#define MX8ULP_PAD_PTE8__DBI0_D3                                     0x00A0 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTE8__EPDC0_BDR0                                  0x00A0 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTE8__LP_HV_DBG_MUX_3                             0x00A0 0x0000 0xe 0x0
+#define MX8ULP_PAD_PTE8__DEBUG_MUX1_19                               0x00A0 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTE9__PTE9                                        0x00A4 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTE9__FXIO1_D14                                   0x00A4 0x0854 0x2 0x1
+#define MX8ULP_PAD_PTE9__LPSPI4_PCS2                                 0x00A4 0x08FC 0x3 0x2
+#define MX8ULP_PAD_PTE9__LPUART6_RTS_B                               0x00A4 0x0000 0x4 0x0
+#define MX8ULP_PAD_PTE9__LPI2C6_SDA                                  0x00A4 0x09BC 0x5 0x1
+#define MX8ULP_PAD_PTE9__TPM4_CH1                                    0x00A4 0x0808 0x6 0x1
+#define MX8ULP_PAD_PTE9__I2S6_RXD3                                   0x00A4 0x0B40 0x7 0x2
+#define MX8ULP_PAD_PTE9__SDHC2_D7                                    0x00A4 0x0AB4 0x8 0x1
+#define MX8ULP_PAD_PTE9__FLEXSPI2_B_DATA1                            0x00A4 0x0958 0x9 0x2
+#define MX8ULP_PAD_PTE9__ENET0_1588_TMR3                             0x00A4 0x0AE0 0xa 0x1
+#define MX8ULP_PAD_PTE9__DBI0_D4                                     0x00A4 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTE9__EPDC0_VCOM1                                 0x00A4 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTE9__LP_HV_DBG_MUX_4                             0x00A4 0x0000 0xe 0x0
+#define MX8ULP_PAD_PTE9__DEBUG_MUX1_20                               0x00A4 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTE10__PTE10                                      0x00A8 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTE10__FXIO1_D13                                  0x00A8 0x0850 0x2 0x1
+#define MX8ULP_PAD_PTE10__LPSPI4_PCS3                                0x00A8 0x0900 0x3 0x2
+#define MX8ULP_PAD_PTE10__LPUART6_TX                                 0x00A8 0x09D4 0x4 0x1
+#define MX8ULP_PAD_PTE10__I3C2_SCL                                   0x00A8 0x08BC 0x5 0x1
+#define MX8ULP_PAD_PTE10__TPM4_CH2                                   0x00A8 0x080C 0x6 0x1
+#define MX8ULP_PAD_PTE10__I2S6_TX_BCLK                               0x00A8 0x0B4C 0x7 0x2
+#define MX8ULP_PAD_PTE10__SDHC2_DQS                                  0x00A8 0x0AB8 0x8 0x1
+#define MX8ULP_PAD_PTE10__FLEXSPI2_B_DATA0                           0x00A8 0x0954 0x9 0x2
+#define MX8ULP_PAD_PTE10__ENET0_1588_TMR2                            0x00A8 0x0ADC 0xa 0x1
+#define MX8ULP_PAD_PTE10__DBI0_D5                                    0x00A8 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTE10__EPDC0_VCOM0                                0x00A8 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTE10__LP_HV_DBG_MUX_5                            0x00A8 0x0000 0xe 0x0
+#define MX8ULP_PAD_PTE10__DEBUG_MUX1_21                              0x00A8 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTE11__PTE11                                      0x00AC 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTE11__FXIO1_D12                                  0x00AC 0x084C 0x2 0x1
+#define MX8ULP_PAD_PTE11__SPDIF_OUT1                                 0x00AC 0x0000 0x3 0x0
+#define MX8ULP_PAD_PTE11__LPUART6_RX                                 0x00AC 0x09D0 0x4 0x1
+#define MX8ULP_PAD_PTE11__I3C2_SDA                                   0x00AC 0x08C0 0x5 0x1
+#define MX8ULP_PAD_PTE11__TPM4_CH3                                   0x00AC 0x0810 0x6 0x1
+#define MX8ULP_PAD_PTE11__I2S6_TX_FS                                 0x00AC 0x0B50 0x7 0x2
+#define MX8ULP_PAD_PTE11__FLEXSPI2_B_SCLK_B                          0x00AC 0x0000 0x8 0x0
+#define MX8ULP_PAD_PTE11__FLEXSPI2_B_SS0_B                           0x00AC 0x0000 0x9 0x0
+#define MX8ULP_PAD_PTE11__ENET0_1588_TMR1                            0x00AC 0x0AD8 0xa 0x1
+#define MX8ULP_PAD_PTE11__DBI0_D6                                    0x00AC 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTE11__EPDC0_PWRCTRL0                             0x00AC 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTE11__LP_HV_DBG_MUX_6                            0x00AC 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTE12__PTE12                                      0x00B0 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTE12__FXIO1_D11                                  0x00B0 0x0848 0x2 0x1
+#define MX8ULP_PAD_PTE12__LPSPI4_SIN                                 0x00B0 0x0908 0x3 0x2
+#define MX8ULP_PAD_PTE12__LPUART7_CTS_B                              0x00B0 0x09D8 0x4 0x1
+#define MX8ULP_PAD_PTE12__LPI2C7_SCL                                 0x00B0 0x09C4 0x5 0x1
+#define MX8ULP_PAD_PTE12__TPM4_CH4                                   0x00B0 0x0814 0x6 0x1
+#define MX8ULP_PAD_PTE12__I2S6_TXD0                                  0x00B0 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTE12__SDHC2_RESET_B                              0x00B0 0x0000 0x8 0x0
+#define MX8ULP_PAD_PTE12__FLEXSPI2_B_SS1_B                           0x00B0 0x0000 0x9 0x0
+#define MX8ULP_PAD_PTE12__ENET0_1588_TMR0                            0x00B0 0x0AD4 0xa 0x1
+#define MX8ULP_PAD_PTE12__DBI0_D7                                    0x00B0 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTE12__EPDC0_PWRCTRL1                             0x00B0 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTE12__WUU1_P5                                    0x00B0 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTE13__PTE13                                      0x00B4 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTE13__FXIO1_D10                                  0x00B4 0x0844 0x2 0x1
+#define MX8ULP_PAD_PTE13__LPSPI4_SOUT                                0x00B4 0x090C 0x3 0x2
+#define MX8ULP_PAD_PTE13__LPUART7_RTS_B                              0x00B4 0x0000 0x4 0x0
+#define MX8ULP_PAD_PTE13__LPI2C7_SDA                                 0x00B4 0x09C8 0x5 0x1
+#define MX8ULP_PAD_PTE13__TPM4_CH5                                   0x00B4 0x0818 0x6 0x1
+#define MX8ULP_PAD_PTE13__I2S6_TXD1                                  0x00B4 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTE13__SDHC1_WP                                   0x00B4 0x0A88 0x8 0x2
+#define MX8ULP_PAD_PTE13__ENET0_1588_CLKIN                           0x00B4 0x0AD0 0xa 0x1
+#define MX8ULP_PAD_PTE13__DBI0_D8                                    0x00B4 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTE13__EPDC0_PWRCTRL2                             0x00B4 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTE13__LP_HV_DBG_MUX_7                            0x00B4 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTE14__PTE14                                      0x00B8 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTE14__FXIO1_D9                                   0x00B8 0x08B8 0x2 0x1
+#define MX8ULP_PAD_PTE14__LPSPI4_SCK                                 0x00B8 0x0904 0x3 0x2
+#define MX8ULP_PAD_PTE14__LPUART7_TX                                 0x00B8 0x09E0 0x4 0x1
+#define MX8ULP_PAD_PTE14__LPI2C7_HREQ                                0x00B8 0x09C0 0x5 0x1
+#define MX8ULP_PAD_PTE14__TPM5_CLKIN                                 0x00B8 0x0838 0x6 0x1
+#define MX8ULP_PAD_PTE14__I2S6_TXD2                                  0x00B8 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTE14__SDHC1_CD                                   0x00B8 0x0A58 0x8 0x2
+#define MX8ULP_PAD_PTE14__ENET0_MDIO                                 0x00B8 0x0AF0 0xa 0x1
+#define MX8ULP_PAD_PTE14__DBI0_D9                                    0x00B8 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTE14__EPDC0_PWRCTRL3                             0x00B8 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTE14__LP_HV_DBG_MUX_8                            0x00B8 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTE15__PTE15                                      0x00BC 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTE15__FXIO1_D8                                   0x00BC 0x08B4 0x2 0x1
+#define MX8ULP_PAD_PTE15__LPSPI4_PCS0                                0x00BC 0x08F4 0x3 0x2
+#define MX8ULP_PAD_PTE15__LPUART7_RX                                 0x00BC 0x09DC 0x4 0x1
+#define MX8ULP_PAD_PTE15__I3C2_PUR                                   0x00BC 0x0000 0x5 0x0
+#define MX8ULP_PAD_PTE15__TPM5_CH0                                   0x00BC 0x0820 0x6 0x1
+#define MX8ULP_PAD_PTE15__I2S6_TXD3                                  0x00BC 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTE15__MQS1_LEFT                                  0x00BC 0x0000 0x8 0x0
+#define MX8ULP_PAD_PTE15__ENET0_MDC                                  0x00BC 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTE15__DBI0_D10                                   0x00BC 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTE15__EPDC0_PWRCOM                               0x00BC 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTE15__WUU1_P6                                    0x00BC 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTE16__PTE16                                      0x00C0 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTE16__FXIO1_D7                                   0x00C0 0x08B0 0x2 0x1
+#define MX8ULP_PAD_PTE16__LPSPI5_PCS1                                0x00C0 0x0914 0x3 0x1
+#define MX8ULP_PAD_PTE16__LPUART4_CTS_B                              0x00C0 0x08DC 0x4 0x2
+#define MX8ULP_PAD_PTE16__LPI2C4_SCL                                 0x00C0 0x08C8 0x5 0x2
+#define MX8ULP_PAD_PTE16__TPM5_CH1                                   0x00C0 0x0824 0x6 0x1
+#define MX8ULP_PAD_PTE16__MQS1_LEFT                                  0x00C0 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTE16__MQS1_RIGHT                                 0x00C0 0x0000 0x8 0x0
+#define MX8ULP_PAD_PTE16__USB0_ID                                    0x00C0 0x0AC8 0x9 0x2
+#define MX8ULP_PAD_PTE16__ENET0_TXEN                                 0x00C0 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTE16__DBI0_D11                                   0x00C0 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTE16__EPDC0_PWRIRQ                               0x00C0 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTE16__WDOG3_RST                                  0x00C0 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTE16__LP_HV_DBG_MUX_9                            0x00C0 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTE17__PTE17                                      0x00C4 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTE17__FXIO1_D6                                   0x00C4 0x08AC 0x2 0x1
+#define MX8ULP_PAD_PTE17__LPSPI5_PCS2                                0x00C4 0x0918 0x3 0x1
+#define MX8ULP_PAD_PTE17__LPUART4_RTS_B                              0x00C4 0x0000 0x4 0x0
+#define MX8ULP_PAD_PTE17__LPI2C4_SDA                                 0x00C4 0x08CC 0x5 0x2
+#define MX8ULP_PAD_PTE17__MQS1_RIGHT                                 0x00C4 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTE17__SDHC1_VS                                   0x00C4 0x0000 0x8 0x0
+#define MX8ULP_PAD_PTE17__USB0_PWR                                   0x00C4 0x0000 0x9 0x0
+#define MX8ULP_PAD_PTE17__ENET0_RXER                                 0x00C4 0x0B08 0xa 0x1
+#define MX8ULP_PAD_PTE17__DBI0_D12                                   0x00C4 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTE17__EPDC0_PWRSTAT                              0x00C4 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTE17__LP_HV_DBG_MUX_10                           0x00C4 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTE18__PTE18                                      0x00C8 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTE18__FXIO1_D5                                   0x00C8 0x08A8 0x2 0x1
+#define MX8ULP_PAD_PTE18__LPSPI5_PCS3                                0x00C8 0x091C 0x3 0x1
+#define MX8ULP_PAD_PTE18__LPUART4_TX                                 0x00C8 0x08E4 0x4 0x2
+#define MX8ULP_PAD_PTE18__LPI2C4_HREQ                                0x00C8 0x08C4 0x5 0x2
+#define MX8ULP_PAD_PTE18__I2S7_TX_BCLK                               0x00C8 0x0B6C 0x7 0x2
+#define MX8ULP_PAD_PTE18__USB0_OC                                    0x00C8 0x0AC0 0x9 0x2
+#define MX8ULP_PAD_PTE18__ENET0_CRS_DV                               0x00C8 0x0AEC 0xa 0x1
+#define MX8ULP_PAD_PTE18__DBI0_D13                                   0x00C8 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTE18__EPDC0_PWRWAKE                              0x00C8 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTE18__LP_HV_DBG_MUX_11                           0x00C8 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTE19__PTE19                                      0x00CC 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTE19__FXIO1_D4                                   0x00CC 0x08A4 0x2 0x1
+#define MX8ULP_PAD_PTE19__LPUART4_RX                                 0x00CC 0x08E0 0x4 0x2
+#define MX8ULP_PAD_PTE19__LPI2C5_HREQ                                0x00CC 0x08D0 0x5 0x2
+#define MX8ULP_PAD_PTE19__I3C2_PUR                                   0x00CC 0x0000 0x6 0x0
+#define MX8ULP_PAD_PTE19__I2S7_TX_FS                                 0x00CC 0x0B70 0x7 0x2
+#define MX8ULP_PAD_PTE19__USB1_PWR                                   0x00CC 0x0000 0x9 0x0
+#define MX8ULP_PAD_PTE19__ENET0_REFCLK                               0x00CC 0x0AF4 0xa 0x1
+#define MX8ULP_PAD_PTE19__DBI0_D14                                   0x00CC 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTE19__EPDC0_GDCLK                                0x00CC 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTE19__WUU1_P7                                    0x00CC 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTE20__PTE20                                      0x00D0 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTE20__FXIO1_D3                                   0x00D0 0x0898 0x2 0x1
+#define MX8ULP_PAD_PTE20__LPSPI5_SIN                                 0x00D0 0x0924 0x3 0x1
+#define MX8ULP_PAD_PTE20__LPUART5_CTS_B                              0x00D0 0x08E8 0x4 0x2
+#define MX8ULP_PAD_PTE20__LPI2C5_SCL                                 0x00D0 0x08D4 0x5 0x2
+#define MX8ULP_PAD_PTE20__I2S7_TXD0                                  0x00D0 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTE20__USB1_OC                                    0x00D0 0x0AC4 0x9 0x2
+#define MX8ULP_PAD_PTE20__ENET0_RXD1                                 0x00D0 0x0AFC 0xa 0x1
+#define MX8ULP_PAD_PTE20__DBI0_D15                                   0x00D0 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTE20__EPDC0_GDOE                                 0x00D0 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTE20__LP_HV_DBG_MUX_12                           0x00D0 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTE21__PTE21                                      0x00D4 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTE21__FXIO1_D2                                   0x00D4 0x086C 0x2 0x1
+#define MX8ULP_PAD_PTE21__LPSPI5_SOUT                                0x00D4 0x0928 0x3 0x1
+#define MX8ULP_PAD_PTE21__LPUART5_RTS_B                              0x00D4 0x0000 0x4 0x0
+#define MX8ULP_PAD_PTE21__LPI2C5_SDA                                 0x00D4 0x08D8 0x5 0x2
+#define MX8ULP_PAD_PTE21__TPM6_CLKIN                                 0x00D4 0x0994 0x6 0x1
+#define MX8ULP_PAD_PTE21__I2S7_TXD1                                  0x00D4 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTE21__USB1_ID                                    0x00D4 0x0ACC 0x9 0x2
+#define MX8ULP_PAD_PTE21__ENET0_RXD0                                 0x00D4 0x0AF8 0xa 0x1
+#define MX8ULP_PAD_PTE21__EPDC0_GDRL                                 0x00D4 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTE21__WDOG4_RST                                  0x00D4 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTE21__LP_HV_DBG_MUX_13                           0x00D4 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTE22__PTE22                                      0x00D8 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTE22__FXIO1_D1                                   0x00D8 0x0840 0x2 0x1
+#define MX8ULP_PAD_PTE22__LPSPI5_SCK                                 0x00D8 0x0920 0x3 0x1
+#define MX8ULP_PAD_PTE22__LPUART5_TX                                 0x00D8 0x08F0 0x4 0x2
+#define MX8ULP_PAD_PTE22__I3C2_SCL                                   0x00D8 0x08BC 0x5 0x2
+#define MX8ULP_PAD_PTE22__TPM6_CH0                                   0x00D8 0x097C 0x6 0x1
+#define MX8ULP_PAD_PTE22__I2S7_TXD2                                  0x00D8 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTE22__EXT_AUD_MCLK3                              0x00D8 0x0B14 0x9 0x5
+#define MX8ULP_PAD_PTE22__ENET0_TXD1                                 0x00D8 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTE22__EPDC0_SDOED                                0x00D8 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTE22__CLKOUT2                                    0x00D8 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTE22__LP_HV_DBG_MUX_14                           0x00D8 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTE23__PTE23                                      0x00DC 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTE23__FXIO1_D0                                   0x00DC 0x083C 0x2 0x1
+#define MX8ULP_PAD_PTE23__LPSPI5_PCS0                                0x00DC 0x0910 0x3 0x1
+#define MX8ULP_PAD_PTE23__LPUART5_RX                                 0x00DC 0x08EC 0x4 0x2
+#define MX8ULP_PAD_PTE23__I3C2_SDA                                   0x00DC 0x08C0 0x5 0x2
+#define MX8ULP_PAD_PTE23__TPM6_CH1                                   0x00DC 0x0980 0x6 0x1
+#define MX8ULP_PAD_PTE23__I2S7_TXD3                                  0x00DC 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTE23__EXT_AUD_MCLK2                              0x00DC 0x0800 0x9 0x1
+#define MX8ULP_PAD_PTE23__ENET0_TXD0                                 0x00DC 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTE23__EPDC0_SDOEZ                                0x00DC 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTE23__CLKOUT1                                    0x00DC 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTE23__LP_HV_DBG_MUX_15                           0x00DC 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTF0__PTF0                                        0x0100 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTF0__FXIO1_D0                                    0x0100 0x083C 0x2 0x2
+#define MX8ULP_PAD_PTF0__LPUART6_CTS_B                               0x0100 0x09CC 0x4 0x2
+#define MX8ULP_PAD_PTF0__LPI2C6_SCL                                  0x0100 0x09B8 0x5 0x2
+#define MX8ULP_PAD_PTF0__I2S7_RX_BCLK                                0x0100 0x0B64 0x7 0x2
+#define MX8ULP_PAD_PTF0__SDHC1_D1                                    0x0100 0x0A68 0x8 0x2
+#define MX8ULP_PAD_PTF0__ENET0_RXD1                                  0x0100 0x0AFC 0x9 0x2
+#define MX8ULP_PAD_PTF0__USB1_ID                                     0x0100 0x0ACC 0xa 0x3
+#define MX8ULP_PAD_PTF0__EPDC0_SDOE                                  0x0100 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTF0__DPI0_D23                                    0x0100 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTF0__WUU1_P8                                     0x0100 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTF1__PTF1                                        0x0104 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTF1__FXIO1_D1                                    0x0104 0x0840 0x2 0x2
+#define MX8ULP_PAD_PTF1__LPUART6_RTS_B                               0x0104 0x0000 0x4 0x0
+#define MX8ULP_PAD_PTF1__LPI2C6_SDA                                  0x0104 0x09BC 0x5 0x2
+#define MX8ULP_PAD_PTF1__I2S7_RX_FS                                  0x0104 0x0B68 0x7 0x2
+#define MX8ULP_PAD_PTF1__SDHC1_D0                                    0x0104 0x0A64 0x8 0x2
+#define MX8ULP_PAD_PTF1__ENET0_RXD0                                  0x0104 0x0AF8 0x9 0x2
+#define MX8ULP_PAD_PTF1__LP_HV_DBG_MUX_16                            0x0104 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTF1__EPDC0_SDSHR                                 0x0104 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTF1__DPI0_D22                                    0x0104 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTF1__WDOG3_RST                                   0x0104 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTF1__DEBUG_MUX0_16                               0x0104 0x0000 0xe 0x0
+#define MX8ULP_PAD_PTF1__DEBUG_MUX1_22                               0x0104 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTF2__PTF2                                        0x0108 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTF2__FXIO1_D2                                    0x0108 0x086C 0x2 0x2
+#define MX8ULP_PAD_PTF2__LPUART6_TX                                  0x0108 0x09D4 0x4 0x2
+#define MX8ULP_PAD_PTF2__LPI2C6_HREQ                                 0x0108 0x09B4 0x5 0x2
+#define MX8ULP_PAD_PTF2__I2S7_RXD0                                   0x0108 0x0B54 0x7 0x2
+#define MX8ULP_PAD_PTF2__SDHC1_CLK                                   0x0108 0x0A5C 0x8 0x2
+#define MX8ULP_PAD_PTF2__ENET0_TXD1                                  0x0108 0x0000 0x9 0x0
+#define MX8ULP_PAD_PTF2__USB0_ID                                     0x0108 0x0AC8 0xa 0x3
+#define MX8ULP_PAD_PTF2__EPDC0_SDCE9                                 0x0108 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTF2__DPI0_D21                                    0x0108 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTF2__LP_HV_DBG_MUX_17                            0x0108 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTF2__DEBUG_MUX0_17                               0x0108 0x0000 0xe 0x0
+#define MX8ULP_PAD_PTF2__DEBUG_MUX1_23                               0x0108 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTF3__PTF3                                        0x010C 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTF3__FXIO1_D3                                    0x010C 0x0898 0x2 0x2
+#define MX8ULP_PAD_PTF3__LPUART6_RX                                  0x010C 0x09D0 0x4 0x2
+#define MX8ULP_PAD_PTF3__LPI2C7_HREQ                                 0x010C 0x09C0 0x5 0x2
+#define MX8ULP_PAD_PTF3__I2S7_RXD1                                   0x010C 0x0B58 0x7 0x2
+#define MX8ULP_PAD_PTF3__SDHC1_CMD                                   0x010C 0x0A60 0x8 0x2
+#define MX8ULP_PAD_PTF3__ENET0_TXD0                                  0x010C 0x0000 0x9 0x0
+#define MX8ULP_PAD_PTF3__USB0_PWR                                    0x010C 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTF3__EPDC0_SDCE8                                 0x010C 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTF3__DPI0_D20                                    0x010C 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTF3__WUU1_P9                                     0x010C 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTF3__DEBUG_MUX1_24                               0x010C 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTF4__PTF4                                        0x0110 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTF4__FXIO1_D4                                    0x0110 0x08A4 0x2 0x2
+#define MX8ULP_PAD_PTF4__LPSPI4_PCS1                                 0x0110 0x08F8 0x3 0x3
+#define MX8ULP_PAD_PTF4__LPUART7_CTS_B                               0x0110 0x09D8 0x4 0x2
+#define MX8ULP_PAD_PTF4__LPI2C7_SCL                                  0x0110 0x09C4 0x5 0x2
+#define MX8ULP_PAD_PTF4__TPM7_CLKIN                                  0x0110 0x09B0 0x6 0x1
+#define MX8ULP_PAD_PTF4__I2S7_RXD2                                   0x0110 0x0B5C 0x7 0x2
+#define MX8ULP_PAD_PTF4__SDHC1_D3                                    0x0110 0x0A70 0x8 0x2
+#define MX8ULP_PAD_PTF4__ENET0_TXEN                                  0x0110 0x0000 0x9 0x0
+#define MX8ULP_PAD_PTF4__USB0_OC                                     0x0110 0x0AC0 0xa 0x3
+#define MX8ULP_PAD_PTF4__EPDC0_SDCE7                                 0x0110 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTF4__DPI0_D19                                    0x0110 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTF4__WUU1_P10                                    0x0110 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTF4__DEBUG_MUX1_25                               0x0110 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTF5__PTF5                                        0x0114 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTF5__FXIO1_D5                                    0x0114 0x08A8 0x2 0x2
+#define MX8ULP_PAD_PTF5__LPSPI4_PCS2                                 0x0114 0x08FC 0x3 0x3
+#define MX8ULP_PAD_PTF5__LPUART7_RTS_B                               0x0114 0x0000 0x4 0x0
+#define MX8ULP_PAD_PTF5__LPI2C7_SDA                                  0x0114 0x09C8 0x5 0x2
+#define MX8ULP_PAD_PTF5__TPM7_CH0                                    0x0114 0x0998 0x6 0x1
+#define MX8ULP_PAD_PTF5__I2S7_RXD3                                   0x0114 0x0B60 0x7 0x2
+#define MX8ULP_PAD_PTF5__SDHC1_D2                                    0x0114 0x0A6C 0x8 0x2
+#define MX8ULP_PAD_PTF5__ENET0_RXER                                  0x0114 0x0B08 0x9 0x2
+#define MX8ULP_PAD_PTF5__USB1_PWR                                    0x0114 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTF5__EPDC0_SDCE6                                 0x0114 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTF5__DPI0_D18                                    0x0114 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTF5__LP_HV_DBG_MUX_18                            0x0114 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTF5__DEBUG_MUX0_18                               0x0114 0x0000 0xe 0x0
+#define MX8ULP_PAD_PTF5__DEBUG_MUX1_26                               0x0114 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTF6__LP_HV_DBG_MUX_19                            0x0118 0x0000 0x0 0x0
+#define MX8ULP_PAD_PTF6__PTF6                                        0x0118 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTF6__FXIO1_D6                                    0x0118 0x08AC 0x2 0x2
+#define MX8ULP_PAD_PTF6__LPSPI4_PCS3                                 0x0118 0x0900 0x3 0x3
+#define MX8ULP_PAD_PTF6__LPUART7_TX                                  0x0118 0x09E0 0x4 0x2
+#define MX8ULP_PAD_PTF6__I3C2_SCL                                    0x0118 0x08BC 0x5 0x3
+#define MX8ULP_PAD_PTF6__TPM7_CH1                                    0x0118 0x099C 0x6 0x1
+#define MX8ULP_PAD_PTF6__I2S7_MCLK                                   0x0118 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTF6__SDHC1_D4                                    0x0118 0x0A74 0x8 0x2
+#define MX8ULP_PAD_PTF6__ENET0_CRS_DV                                0x0118 0x0AEC 0x9 0x2
+#define MX8ULP_PAD_PTF6__USB1_OC                                     0x0118 0x0AC4 0xa 0x3
+#define MX8ULP_PAD_PTF6__EPDC0_SDCE5                                 0x0118 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTF6__DPI0_D17                                    0x0118 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTF6__WDOG4_RST                                   0x0118 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTF6__DEBUG_MUX0_19                               0x0118 0x0000 0xe 0x0
+#define MX8ULP_PAD_PTF6__DEBUG_MUX1_27                               0x0118 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTF7__PTF7                                        0x011C 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTF7__FXIO1_D7                                    0x011C 0x08B0 0x2 0x2
+#define MX8ULP_PAD_PTF7__LPUART7_RX                                  0x011C 0x09DC 0x4 0x2
+#define MX8ULP_PAD_PTF7__I3C2_SDA                                    0x011C 0x08C0 0x5 0x3
+#define MX8ULP_PAD_PTF7__TPM7_CH2                                    0x011C 0x09A0 0x6 0x1
+#define MX8ULP_PAD_PTF7__MQS1_LEFT                                   0x011C 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTF7__SDHC1_D5                                    0x011C 0x0A78 0x8 0x2
+#define MX8ULP_PAD_PTF7__ENET0_REFCLK                                0x011C 0x0AF4 0x9 0x2
+#define MX8ULP_PAD_PTF7__TRACE0_D15                                  0x011C 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTF7__EPDC0_SDCE4                                 0x011C 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTF7__DPI0_D16                                    0x011C 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTF7__WUU1_P11                                    0x011C 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTF7__DEBUG_MUX1_28                               0x011C 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTF8__PTF8                                        0x0120 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTF8__FXIO1_D8                                    0x0120 0x08B4 0x2 0x2
+#define MX8ULP_PAD_PTF8__LPSPI4_SIN                                  0x0120 0x0908 0x3 0x3
+#define MX8ULP_PAD_PTF8__LPUART4_CTS_B                               0x0120 0x08DC 0x4 0x3
+#define MX8ULP_PAD_PTF8__LPI2C4_SCL                                  0x0120 0x08C8 0x5 0x3
+#define MX8ULP_PAD_PTF8__TPM7_CH3                                    0x0120 0x09A4 0x6 0x1
+#define MX8ULP_PAD_PTF8__MQS1_RIGHT                                  0x0120 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTF8__SDHC1_D6                                    0x0120 0x0A7C 0x8 0x2
+#define MX8ULP_PAD_PTF8__ENET0_MDIO                                  0x0120 0x0AF0 0x9 0x2
+#define MX8ULP_PAD_PTF8__TRACE0_D14                                  0x0120 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTF8__EPDC0_D15                                   0x0120 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTF8__DPI0_D15                                    0x0120 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTF8__LP_HV_DBG_MUX_24                            0x0120 0x0000 0xe 0x0
+#define MX8ULP_PAD_PTF8__DEBUG_MUX1_29                               0x0120 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTF9__PTF9                                        0x0124 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTF9__FXIO1_D9                                    0x0124 0x08B8 0x2 0x2
+#define MX8ULP_PAD_PTF9__LPSPI4_SOUT                                 0x0124 0x090C 0x3 0x3
+#define MX8ULP_PAD_PTF9__LPUART4_RTS_B                               0x0124 0x0000 0x4 0x0
+#define MX8ULP_PAD_PTF9__LPI2C4_SDA                                  0x0124 0x08CC 0x5 0x3
+#define MX8ULP_PAD_PTF9__TPM7_CH4                                    0x0124 0x09A8 0x6 0x1
+#define MX8ULP_PAD_PTF9__EXT_AUD_MCLK2                               0x0124 0x0800 0x7 0x2
+#define MX8ULP_PAD_PTF9__SDHC1_D7                                    0x0124 0x0A80 0x8 0x2
+#define MX8ULP_PAD_PTF9__ENET0_MDC                                   0x0124 0x0000 0x9 0x0
+#define MX8ULP_PAD_PTF9__TRACE0_D13                                  0x0124 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTF9__EPDC0_D14                                   0x0124 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTF9__DPI0_D14                                    0x0124 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTF9__LP_HV_DBG_MUX_25                            0x0124 0x0000 0xe 0x0
+#define MX8ULP_PAD_PTF9__DEBUG_MUX1_30                               0x0124 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTF10__LP_HV_DBG_MUX_26                           0x0128 0x0000 0x0 0x0
+#define MX8ULP_PAD_PTF10__PTF10                                      0x0128 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTF10__FXIO1_D10                                  0x0128 0x0844 0x2 0x2
+#define MX8ULP_PAD_PTF10__LPSPI4_SCK                                 0x0128 0x0904 0x3 0x3
+#define MX8ULP_PAD_PTF10__LPUART4_TX                                 0x0128 0x08E4 0x4 0x3
+#define MX8ULP_PAD_PTF10__LPI2C4_HREQ                                0x0128 0x08C4 0x5 0x3
+#define MX8ULP_PAD_PTF10__TPM7_CH5                                   0x0128 0x09AC 0x6 0x1
+#define MX8ULP_PAD_PTF10__I2S4_RX_BCLK                               0x0128 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTF10__SDHC1_DQS                                  0x0128 0x0A84 0x8 0x2
+#define MX8ULP_PAD_PTF10__ENET0_1588_CLKIN                           0x0128 0x0AD0 0x9 0x2
+#define MX8ULP_PAD_PTF10__TRACE0_D12                                 0x0128 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTF10__EPDC0_D13                                  0x0128 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTF10__DPI0_D13                                   0x0128 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTF10__DEBUG_MUX0_20                              0x0128 0x0000 0xe 0x0
+#define MX8ULP_PAD_PTF10__DEBUG_MUX1_31                              0x0128 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTF11__PTF11                                      0x012C 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTF11__FXIO1_D11                                  0x012C 0x0848 0x2 0x2
+#define MX8ULP_PAD_PTF11__LPSPI4_PCS0                                0x012C 0x08F4 0x3 0x3
+#define MX8ULP_PAD_PTF11__LPUART4_RX                                 0x012C 0x08E0 0x4 0x3
+#define MX8ULP_PAD_PTF11__TPM4_CLKIN                                 0x012C 0x081C 0x6 0x2
+#define MX8ULP_PAD_PTF11__I2S4_RX_FS                                 0x012C 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTF11__SDHC1_RESET_B                              0x012C 0x0000 0x8 0x0
+#define MX8ULP_PAD_PTF11__ENET0_1588_TMR0                            0x012C 0x0AD4 0x9 0x2
+#define MX8ULP_PAD_PTF11__TRACE0_D11                                 0x012C 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTF11__EPDC0_D12                                  0x012C 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTF11__DPI0_D12                                   0x012C 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTF11__LP_HV_DBG_MUX_27                           0x012C 0x0000 0xe 0x0
+#define MX8ULP_PAD_PTF11__DEBUG_MUX1_32                              0x012C 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTF12__PTF12                                      0x0130 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTF12__FXIO1_D12                                  0x0130 0x084C 0x2 0x2
+#define MX8ULP_PAD_PTF12__LPSPI5_PCS1                                0x0130 0x0914 0x3 0x2
+#define MX8ULP_PAD_PTF12__LPUART5_CTS_B                              0x0130 0x08E8 0x4 0x3
+#define MX8ULP_PAD_PTF12__LPI2C5_SCL                                 0x0130 0x08D4 0x5 0x3
+#define MX8ULP_PAD_PTF12__TPM4_CH0                                   0x0130 0x0804 0x6 0x2
+#define MX8ULP_PAD_PTF12__I2S4_RXD0                                  0x0130 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTF12__SDHC2_WP                                   0x0130 0x0ABC 0x8 0x1
+#define MX8ULP_PAD_PTF12__ENET0_1588_TMR1                            0x0130 0x0AD8 0x9 0x2
+#define MX8ULP_PAD_PTF12__TRACE0_D10                                 0x0130 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTF12__EPDC0_D11                                  0x0130 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTF12__DPI0_D11                                   0x0130 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTF12__LP_HV_DBG_MUX_28                           0x0130 0x0000 0xe 0x0
+#define MX8ULP_PAD_PTF12__DEBUG_MUX1_33                              0x0130 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTF13__PTF13                                      0x0134 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTF13__FXIO1_D13                                  0x0134 0x0850 0x2 0x2
+#define MX8ULP_PAD_PTF13__LPSPI5_PCS2                                0x0134 0x0918 0x3 0x2
+#define MX8ULP_PAD_PTF13__LPUART5_RTS_B                              0x0134 0x0000 0x4 0x0
+#define MX8ULP_PAD_PTF13__LPI2C5_SDA                                 0x0134 0x08D8 0x5 0x3
+#define MX8ULP_PAD_PTF13__TPM4_CH1                                   0x0134 0x0808 0x6 0x2
+#define MX8ULP_PAD_PTF13__I2S4_RXD1                                  0x0134 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTF13__SDHC2_CD                                   0x0134 0x0A8C 0x8 0x1
+#define MX8ULP_PAD_PTF13__ENET0_1588_TMR2                            0x0134 0x0ADC 0x9 0x2
+#define MX8ULP_PAD_PTF13__TRACE0_D9                                  0x0134 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTF13__EPDC0_D10                                  0x0134 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTF13__DPI0_D10                                   0x0134 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTF13__DEBUG_MUX0_21                              0x0134 0x0000 0xe 0x0
+#define MX8ULP_PAD_PTF13__LP_HV_DBG_MUX_29                           0x0134 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTF14__PTF14                                      0x0138 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTF14__FXIO1_D14                                  0x0138 0x0854 0x2 0x2
+#define MX8ULP_PAD_PTF14__LPSPI5_PCS3                                0x0138 0x091C 0x3 0x2
+#define MX8ULP_PAD_PTF14__LPUART5_TX                                 0x0138 0x08F0 0x4 0x3
+#define MX8ULP_PAD_PTF14__LPI2C5_HREQ                                0x0138 0x08D0 0x5 0x3
+#define MX8ULP_PAD_PTF14__TPM4_CH2                                   0x0138 0x080C 0x6 0x2
+#define MX8ULP_PAD_PTF14__I2S4_MCLK                                  0x0138 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTF14__SDHC2_VS                                   0x0138 0x0000 0x8 0x0
+#define MX8ULP_PAD_PTF14__ENET0_1588_TMR3                            0x0138 0x0AE0 0x9 0x2
+#define MX8ULP_PAD_PTF14__TRACE0_D8                                  0x0138 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTF14__EPDC0_D9                                   0x0138 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTF14__DPI0_D9                                    0x0138 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTF14__DEBUG_MUX0_22                              0x0138 0x0000 0xe 0x0
+#define MX8ULP_PAD_PTF14__LP_HV_DBG_MUX_30                           0x0138 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTF15__PTF15                                      0x013C 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTF15__FXIO1_D15                                  0x013C 0x0858 0x2 0x2
+#define MX8ULP_PAD_PTF15__LPUART5_RX                                 0x013C 0x08EC 0x4 0x3
+#define MX8ULP_PAD_PTF15__TPM4_CH3                                   0x013C 0x0810 0x6 0x2
+#define MX8ULP_PAD_PTF15__I2S4_TX_BCLK                               0x013C 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTF15__SDHC2_D1                                   0x013C 0x0A9C 0x8 0x3
+#define MX8ULP_PAD_PTF15__ENET0_RXD2                                 0x013C 0x0B00 0x9 0x2
+#define MX8ULP_PAD_PTF15__TRACE0_D7                                  0x013C 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTF15__EPDC0_D8                                   0x013C 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTF15__DPI0_D8                                    0x013C 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTF15__LP_HV_DBG_MUX_31                           0x013C 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTF16__PTF16                                      0x0140 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTF16__FXIO1_D16                                  0x0140 0x085C 0x2 0x2
+#define MX8ULP_PAD_PTF16__LPSPI5_SIN                                 0x0140 0x0924 0x3 0x2
+#define MX8ULP_PAD_PTF16__LPUART6_CTS_B                              0x0140 0x09CC 0x4 0x3
+#define MX8ULP_PAD_PTF16__LPI2C6_SCL                                 0x0140 0x09B8 0x5 0x3
+#define MX8ULP_PAD_PTF16__TPM4_CH4                                   0x0140 0x0814 0x6 0x2
+#define MX8ULP_PAD_PTF16__I2S4_TX_FS                                 0x0140 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTF16__SDHC2_D0                                   0x0140 0x0A98 0x8 0x3
+#define MX8ULP_PAD_PTF16__ENET0_RXD3                                 0x0140 0x0B04 0x9 0x2
+#define MX8ULP_PAD_PTF16__TRACE0_D6                                  0x0140 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTF16__EPDC0_D7                                   0x0140 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTF16__DPI0_D7                                    0x0140 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTF16__LP_HV_DBG_MUX_32                           0x0140 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTF17__PTF17                                      0x0144 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTF17__FXIO1_D17                                  0x0144 0x0860 0x2 0x2
+#define MX8ULP_PAD_PTF17__LPSPI5_SOUT                                0x0144 0x0928 0x3 0x2
+#define MX8ULP_PAD_PTF17__LPUART6_RTS_B                              0x0144 0x0000 0x4 0x0
+#define MX8ULP_PAD_PTF17__LPI2C6_SDA                                 0x0144 0x09BC 0x5 0x3
+#define MX8ULP_PAD_PTF17__TPM4_CH5                                   0x0144 0x0818 0x6 0x2
+#define MX8ULP_PAD_PTF17__I2S4_TXD0                                  0x0144 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTF17__SDHC2_CLK                                  0x0144 0x0A90 0x8 0x3
+#define MX8ULP_PAD_PTF17__ENET0_RXCLK                                0x0144 0x0B0C 0x9 0x2
+#define MX8ULP_PAD_PTF17__TRACE0_D5                                  0x0144 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTF17__EPDC0_D6                                   0x0144 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTF17__DPI0_D6                                    0x0144 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTF17__DEBUG_MUX0_23                              0x0144 0x0000 0xe 0x0
+#define MX8ULP_PAD_PTF17__LP_HV_DBG_MUX_33                           0x0144 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTF18__PTF18                                      0x0148 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTF18__FXIO1_D18                                  0x0148 0x0864 0x2 0x2
+#define MX8ULP_PAD_PTF18__LPSPI5_SCK                                 0x0148 0x0920 0x3 0x2
+#define MX8ULP_PAD_PTF18__LPUART6_TX                                 0x0148 0x09D4 0x4 0x3
+#define MX8ULP_PAD_PTF18__LPI2C6_HREQ                                0x0148 0x09B4 0x5 0x3
+#define MX8ULP_PAD_PTF18__TPM5_CLKIN                                 0x0148 0x0838 0x6 0x2
+#define MX8ULP_PAD_PTF18__I2S4_TXD1                                  0x0148 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTF18__SDHC2_CMD                                  0x0148 0x0A94 0x8 0x3
+#define MX8ULP_PAD_PTF18__ENET0_TXD2                                 0x0148 0x0000 0x9 0x0
+#define MX8ULP_PAD_PTF18__TRACE0_D4                                  0x0148 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTF18__EPDC0_D5                                   0x0148 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTF18__DPI0_D5                                    0x0148 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTF19__PTF19                                      0x014C 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTF19__FXIO1_D19                                  0x014C 0x0868 0x2 0x2
+#define MX8ULP_PAD_PTF19__LPSPI5_PCS0                                0x014C 0x0910 0x3 0x2
+#define MX8ULP_PAD_PTF19__LPUART6_RX                                 0x014C 0x09D0 0x4 0x3
+#define MX8ULP_PAD_PTF19__TPM5_CH0                                   0x014C 0x0820 0x6 0x2
+#define MX8ULP_PAD_PTF19__I2S5_RX_BCLK                               0x014C 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTF19__SDHC2_D3                                   0x014C 0x0AA4 0x8 0x3
+#define MX8ULP_PAD_PTF19__ENET0_TXD3                                 0x014C 0x0000 0x9 0x0
+#define MX8ULP_PAD_PTF19__TRACE0_D3                                  0x014C 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTF19__EPDC0_D4                                   0x014C 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTF19__DPI0_D4                                    0x014C 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTF20__PTF20                                      0x0150 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTF20__FXIO1_D20                                  0x0150 0x0870 0x2 0x2
+#define MX8ULP_PAD_PTF20__LPUART7_CTS_B                              0x0150 0x09D8 0x4 0x3
+#define MX8ULP_PAD_PTF20__LPI2C7_SCL                                 0x0150 0x09C4 0x5 0x3
+#define MX8ULP_PAD_PTF20__TPM5_CH1                                   0x0150 0x0824 0x6 0x2
+#define MX8ULP_PAD_PTF20__I2S5_RX_FS                                 0x0150 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTF20__SDHC2_D2                                   0x0150 0x0AA0 0x8 0x3
+#define MX8ULP_PAD_PTF20__ENET0_TXCLK                                0x0150 0x0B10 0x9 0x2
+#define MX8ULP_PAD_PTF20__TRACE0_D2                                  0x0150 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTF20__EPDC0_D3                                   0x0150 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTF20__DPI0_D3                                    0x0150 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTF21__PTF21                                      0x0154 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTF21__FXIO1_D21                                  0x0154 0x0874 0x2 0x2
+#define MX8ULP_PAD_PTF21__SPDIF_CLK                                  0x0154 0x0000 0x3 0x0
+#define MX8ULP_PAD_PTF21__LPUART7_RTS_B                              0x0154 0x0000 0x4 0x0
+#define MX8ULP_PAD_PTF21__LPI2C7_SDA                                 0x0154 0x09C8 0x5 0x3
+#define MX8ULP_PAD_PTF21__TPM6_CLKIN                                 0x0154 0x0994 0x6 0x2
+#define MX8ULP_PAD_PTF21__I2S5_RXD0                                  0x0154 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTF21__SDHC2_D4                                   0x0154 0x0AA8 0x8 0x2
+#define MX8ULP_PAD_PTF21__ENET0_CRS                                  0x0154 0x0AE8 0x9 0x2
+#define MX8ULP_PAD_PTF21__TRACE0_D1                                  0x0154 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTF21__EPDC0_D2                                   0x0154 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTF21__DPI0_D2                                    0x0154 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTF22__PTF22                                      0x0158 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTF22__FXIO1_D22                                  0x0158 0x0878 0x2 0x2
+#define MX8ULP_PAD_PTF22__SPDIF_IN0                                  0x0158 0x0B74 0x3 0x3
+#define MX8ULP_PAD_PTF22__LPUART7_TX                                 0x0158 0x09E0 0x4 0x3
+#define MX8ULP_PAD_PTF22__LPI2C7_HREQ                                0x0158 0x09C0 0x5 0x3
+#define MX8ULP_PAD_PTF22__TPM6_CH0                                   0x0158 0x097C 0x6 0x2
+#define MX8ULP_PAD_PTF22__I2S5_RXD1                                  0x0158 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTF22__SDHC2_D5                                   0x0158 0x0AAC 0x8 0x2
+#define MX8ULP_PAD_PTF22__ENET0_COL                                  0x0158 0x0AE4 0x9 0x2
+#define MX8ULP_PAD_PTF22__TRACE0_D0                                  0x0158 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTF22__EPDC0_D1                                   0x0158 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTF22__DPI0_D1                                    0x0158 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTF23__PTF23                                      0x015C 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTF23__FXIO1_D23                                  0x015C 0x087C 0x2 0x2
+#define MX8ULP_PAD_PTF23__SPDIF_OUT0                                 0x015C 0x0000 0x3 0x0
+#define MX8ULP_PAD_PTF23__LPUART7_RX                                 0x015C 0x09DC 0x4 0x3
+#define MX8ULP_PAD_PTF23__I3C2_PUR                                   0x015C 0x0000 0x5 0x0
+#define MX8ULP_PAD_PTF23__TPM6_CH1                                   0x015C 0x0980 0x6 0x2
+#define MX8ULP_PAD_PTF23__I2S5_RXD2                                  0x015C 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTF23__SDHC2_D6                                   0x015C 0x0AB0 0x8 0x2
+#define MX8ULP_PAD_PTF23__ENET0_TXER                                 0x015C 0x0000 0x9 0x0
+#define MX8ULP_PAD_PTF23__TRACE0_CLKOUT                              0x015C 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTF23__EPDC0_D0                                   0x015C 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTF23__DPI0_D0                                    0x015C 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTF24__PTF24                                      0x0160 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTF24__FXIO1_D24                                  0x0160 0x0880 0x2 0x2
+#define MX8ULP_PAD_PTF24__SPDIF_IN1                                  0x0160 0x0B78 0x3 0x3
+#define MX8ULP_PAD_PTF24__I3C2_SCL                                   0x0160 0x08BC 0x5 0x4
+#define MX8ULP_PAD_PTF24__I2S5_RXD3                                  0x0160 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTF24__SDHC2_D7                                   0x0160 0x0AB4 0x8 0x2
+#define MX8ULP_PAD_PTF24__DBI0_WRX                                   0x0160 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTF24__EPDC0_SDCLK                                0x0160 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTF24__DPI0_PCLK                                  0x0160 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTF24__WUU1_P12                                   0x0160 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTF25__PTF25                                      0x0164 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTF25__FXIO1_D25                                  0x0164 0x0884 0x2 0x2
+#define MX8ULP_PAD_PTF25__SPDIF_OUT1                                 0x0164 0x0000 0x3 0x0
+#define MX8ULP_PAD_PTF25__I3C2_SDA                                   0x0164 0x08C0 0x5 0x4
+#define MX8ULP_PAD_PTF25__TPM7_CH5                                   0x0164 0x09AC 0x6 0x2
+#define MX8ULP_PAD_PTF25__I2S5_MCLK                                  0x0164 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTF25__SDHC2_DQS                                  0x0164 0x0AB8 0x8 0x2
+#define MX8ULP_PAD_PTF25__EXT_AUD_MCLK2                              0x0164 0x0800 0x9 0x3
+#define MX8ULP_PAD_PTF25__EPDC0_GDSP                                 0x0164 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTF25__DPI0_VSYNC                                 0x0164 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTF25__WUU1_P13                                   0x0164 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTF26__PTF26                                      0x0168 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTF26__FXIO1_D26                                  0x0168 0x0888 0x2 0x2
+#define MX8ULP_PAD_PTF26__SPDIF_IN2                                  0x0168 0x0B7C 0x3 0x3
+#define MX8ULP_PAD_PTF26__TPM7_CLKIN                                 0x0168 0x09B0 0x6 0x2
+#define MX8ULP_PAD_PTF26__I2S5_TX_BCLK                               0x0168 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTF26__SDHC2_RESET_B                              0x0168 0x0000 0x8 0x0
+#define MX8ULP_PAD_PTF26__EPDC0_SDLE                                 0x0168 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTF26__DPI0_HSYNC                                 0x0168 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTF26__WUU1_P14                                   0x0168 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTF27__PTF27                                      0x016C 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTF27__FXIO1_D27                                  0x016C 0x088C 0x2 0x2
+#define MX8ULP_PAD_PTF27__SPDIF_OUT2                                 0x016C 0x0000 0x3 0x0
+#define MX8ULP_PAD_PTF27__TPM7_CH0                                   0x016C 0x0998 0x6 0x2
+#define MX8ULP_PAD_PTF27__I2S5_TX_FS                                 0x016C 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTF27__SDHC2_WP                                   0x016C 0x0ABC 0x8 0x2
+#define MX8ULP_PAD_PTF27__EPDC0_SDCE0                                0x016C 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTF27__DPI0_DE                                    0x016C 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTF27__WUU1_P15                                   0x016C 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTF28__PTF28                                      0x0170 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTF28__FXIO1_D28                                  0x0170 0x0890 0x2 0x2
+#define MX8ULP_PAD_PTF28__SPDIF_IN3                                  0x0170 0x0B80 0x3 0x3
+#define MX8ULP_PAD_PTF28__TPM7_CH1                                   0x0170 0x099C 0x6 0x2
+#define MX8ULP_PAD_PTF28__I2S5_TXD0                                  0x0170 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTF28__SDHC2_CD                                   0x0170 0x0A8C 0x8 0x2
+#define MX8ULP_PAD_PTF28__EPDC0_SDCLK_B                              0x0170 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTF28__LP_HV_DBG_MUX_20                           0x0170 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTF29__PTF29                                      0x0174 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTF29__FXIO1_D29                                  0x0174 0x0894 0x2 0x2
+#define MX8ULP_PAD_PTF29__SPDIF_OUT3                                 0x0174 0x0000 0x3 0x0
+#define MX8ULP_PAD_PTF29__TPM7_CH2                                   0x0174 0x09A0 0x6 0x2
+#define MX8ULP_PAD_PTF29__I2S5_TXD1                                  0x0174 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTF29__SDHC2_VS                                   0x0174 0x0000 0x8 0x0
+#define MX8ULP_PAD_PTF29__EPDC0_SDCE1                                0x0174 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTF29__WDOG3_RST                                  0x0174 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTF29__LP_HV_DBG_MUX_21                           0x0174 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTF30__PTF30                                      0x0178 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTF30__FXIO1_D30                                  0x0178 0x089C 0x2 0x2
+#define MX8ULP_PAD_PTF30__TPM7_CH3                                   0x0178 0x09A4 0x6 0x2
+#define MX8ULP_PAD_PTF30__I2S5_TXD2                                  0x0178 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTF30__MQS1_LEFT                                  0x0178 0x0000 0x8 0x0
+#define MX8ULP_PAD_PTF30__EPDC0_SDCE2                                0x0178 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTF30__WDOG4_RST                                  0x0178 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTF30__LP_HV_DBG_MUX_22                           0x0178 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTF31__PTF31                                      0x017C 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTF31__FXIO1_D31                                  0x017C 0x08A0 0x2 0x2
+#define MX8ULP_PAD_PTF31__TPM7_CH4                                   0x017C 0x09A8 0x6 0x2
+#define MX8ULP_PAD_PTF31__I2S5_TXD3                                  0x017C 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTF31__MQS1_RIGHT                                 0x017C 0x0000 0x8 0x0
+#define MX8ULP_PAD_PTF31__EPDC0_SDCE3                                0x017C 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTF31__WDOG5_RST                                  0x017C 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTF31__LP_HV_DBG_MUX_23                           0x017C 0x0000 0xf 0x0
+#define MX8ULP_PAD_BOOT_MODE0__BOOT_MODE0                            0x0400 0x0000 0x0 0x0
+#define MX8ULP_PAD_BOOT_MODE1__BOOT_MODE1                            0x0404 0x0000 0x0 0x0
+
+#endif /* __DTS_IMX8ULP_PINFUNC_H */
diff --git a/dts/src/arm64/freescale/imx8ulp.dtsi b/dts/src/arm64/freescale/imx8ulp.dtsi
new file mode 100644
index 0000000000..a987ff7156
--- /dev/null
+++ b/dts/src/arm64/freescale/imx8ulp.dtsi
@@ -0,0 +1,434 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2021 NXP
+ */
+
+#include <dt-bindings/clock/imx8ulp-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/imx8ulp-power.h>
+
+#include "imx8ulp-pinfunc.h"
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		gpio0 = &gpiod;
+		gpio1 = &gpioe;
+		gpio2 = &gpiof;
+		mmc0 = &usdhc0;
+		mmc1 = &usdhc1;
+		mmc2 = &usdhc2;
+		serial0 = &lpuart4;
+		serial1 = &lpuart5;
+		serial2 = &lpuart6;
+		serial3 = &lpuart7;
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		A35_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			next-level-cache = <&A35_L2>;
+		};
+
+		A35_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+			next-level-cache = <&A35_L2>;
+		};
+
+		A35_L2: l2-cache0 {
+			compatible = "cache";
+		};
+	};
+
+	gic: interrupt-controller@2d400000 {
+		compatible = "arm,gic-v3";
+		reg = <0x0 0x2d400000 0 0x10000>, /* GIC Dist */
+		      <0x0 0x2d440000 0 0xc0000>; /* GICR (RD_base + SGI_base) */
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* Physical Secure */
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* Physical Non-Secure */
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* Virtual */
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* Hypervisor */
+	};
+
+	frosc: clock-frosc {
+		compatible = "fixed-clock";
+		clock-frequency = <192000000>;
+		clock-output-names = "frosc";
+		#clock-cells = <0>;
+	};
+
+	lposc: clock-lposc {
+		compatible = "fixed-clock";
+		clock-frequency = <1000000>;
+		clock-output-names = "lposc";
+		#clock-cells = <0>;
+	};
+
+	rosc: clock-rosc {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		clock-output-names = "rosc";
+		#clock-cells = <0>;
+	};
+
+	sosc: clock-sosc {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "sosc";
+		#clock-cells = <0>;
+	};
+
+	sram@2201f000 {
+		compatible = "mmio-sram";
+		reg = <0x0 0x2201f000 0x0 0x1000>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x0 0x2201f000 0x1000>;
+
+		scmi_buf: scmi-buf@0 {
+			compatible = "arm,scmi-shmem";
+			reg = <0x0 0x400>;
+		};
+	};
+
+	firmware {
+		scmi {
+			compatible = "arm,scmi-smc";
+			arm,smc-id = <0xc20000fe>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			shmem = <&scmi_buf>;
+
+			scmi_devpd: protocol@11 {
+				reg = <0x11>;
+				#power-domain-cells = <1>;
+			};
+
+			scmi_sensor: protocol@15 {
+				reg = <0x15>;
+				#thermal-sensor-cells = <0>;
+			};
+		};
+	};
+
+	soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x0 0x40000000>;
+
+		per_bridge3: bus@29000000 {
+			compatible = "simple-bus";
+			reg = <0x29000000 0x800000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			wdog3: watchdog@292a0000 {
+				compatible = "fsl,imx8ulp-wdt", "fsl,imx7ulp-wdt";
+				reg = <0x292a0000 0x10000>;
+				interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pcc3 IMX8ULP_CLK_WDOG3>;
+				assigned-clocks = <&pcc3 IMX8ULP_CLK_WDOG3>;
+				assigned-clock-parents = <&cgc1 IMX8ULP_CLK_SOSC_DIV2>;
+				timeout-sec = <40>;
+			};
+
+			cgc1: clock-controller@292c0000 {
+				compatible = "fsl,imx8ulp-cgc1";
+				reg = <0x292c0000 0x10000>;
+				clocks = <&rosc>, <&sosc>, <&frosc>, <&lposc>;
+				clock-names = "rosc", "sosc", "frosc", "lposc";
+				#clock-cells = <1>;
+			};
+
+			pcc3: clock-controller@292d0000 {
+				compatible = "fsl,imx8ulp-pcc3";
+				reg = <0x292d0000 0x10000>;
+				#clock-cells = <1>;
+			};
+
+			tpm5: tpm@29340000 {
+				compatible = "fsl,imx8ulp-tpm", "fsl,imx7ulp-tpm";
+				reg = <0x29340000 0x1000>;
+				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pcc3 IMX8ULP_CLK_TPM5>,
+					 <&pcc3 IMX8ULP_CLK_TPM5>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			lpi2c4: i2c@29370000 {
+				compatible = "fsl,imx8ulp-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x29370000 0x10000>;
+				interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pcc3 IMX8ULP_CLK_LPI2C4>,
+					 <&pcc3 IMX8ULP_CLK_LPI2C4>;
+				clock-names = "per", "ipg";
+				assigned-clocks = <&pcc3 IMX8ULP_CLK_LPI2C4>;
+				assigned-clock-parents = <&cgc1 IMX8ULP_CLK_XBAR_DIVBUS>;
+				assigned-clock-rates = <48000000>;
+				status = "disabled";
+			};
+
+			lpi2c5: i2c@29380000 {
+				compatible = "fsl,imx8ulp-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x29380000 0x10000>;
+				interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pcc3 IMX8ULP_CLK_LPI2C5>,
+					 <&pcc3 IMX8ULP_CLK_LPI2C5>;
+				clock-names = "per", "ipg";
+				assigned-clocks = <&pcc3 IMX8ULP_CLK_LPI2C5>;
+				assigned-clock-parents = <&cgc1 IMX8ULP_CLK_XBAR_DIVBUS>;
+				assigned-clock-rates = <48000000>;
+				status = "disabled";
+			};
+
+			lpuart4: serial@29390000 {
+				compatible = "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
+				reg = <0x29390000 0x1000>;
+				interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pcc3 IMX8ULP_CLK_LPUART4>;
+				clock-names = "ipg";
+				status = "disabled";
+			};
+
+			lpuart5: serial@293a0000 {
+				compatible = "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
+				reg = <0x293a0000 0x1000>;
+				interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pcc3 IMX8ULP_CLK_LPUART5>;
+				clock-names = "ipg";
+				status = "disabled";
+			};
+
+			lpspi4: spi@293b0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx8ulp-spi", "fsl,imx7ulp-spi";
+				reg = <0x293b0000 0x10000>;
+				interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pcc3 IMX8ULP_CLK_LPSPI4>,
+					 <&pcc3 IMX8ULP_CLK_LPSPI4>;
+				clock-names = "per", "ipg";
+				assigned-clocks = <&pcc3 IMX8ULP_CLK_LPSPI4>;
+				assigned-clock-parents = <&cgc1 IMX8ULP_CLK_XBAR_DIVBUS>;
+				assigned-clock-rates = <16000000>;
+				status = "disabled";
+			};
+
+			lpspi5: spi@293c0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx8ulp-spi", "fsl,imx7ulp-spi";
+				reg = <0x293c0000 0x10000>;
+				interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pcc3 IMX8ULP_CLK_LPSPI5>,
+					 <&pcc3 IMX8ULP_CLK_LPSPI5>;
+				clock-names = "per", "ipg";
+				assigned-clocks = <&pcc3 IMX8ULP_CLK_LPSPI5>;
+				assigned-clock-parents = <&cgc1 IMX8ULP_CLK_XBAR_DIVBUS>;
+				assigned-clock-rates = <16000000>;
+				status = "disabled";
+			};
+		};
+
+		per_bridge4: bus@29800000 {
+			compatible = "simple-bus";
+			reg = <0x29800000 0x800000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			pcc4: clock-controller@29800000 {
+				compatible = "fsl,imx8ulp-pcc4";
+				reg = <0x29800000 0x10000>;
+				#clock-cells = <1>;
+			};
+
+			lpi2c6: i2c@29840000 {
+				compatible = "fsl,imx8ulp-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x29840000 0x10000>;
+				interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pcc4 IMX8ULP_CLK_LPI2C6>,
+					 <&pcc4 IMX8ULP_CLK_LPI2C6>;
+				clock-names = "per", "ipg";
+				assigned-clocks = <&pcc4 IMX8ULP_CLK_LPI2C6>;
+				assigned-clock-parents = <&cgc1 IMX8ULP_CLK_XBAR_DIVBUS>;
+				assigned-clock-rates = <48000000>;
+				status = "disabled";
+			};
+
+			lpi2c7: i2c@29850000 {
+				compatible = "fsl,imx8ulp-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x29850000 0x10000>;
+				interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pcc4 IMX8ULP_CLK_LPI2C7>,
+					 <&pcc4 IMX8ULP_CLK_LPI2C7>;
+				clock-names = "per", "ipg";
+				assigned-clocks = <&pcc4 IMX8ULP_CLK_LPI2C7>;
+				assigned-clock-parents = <&cgc1 IMX8ULP_CLK_XBAR_DIVBUS>;
+				assigned-clock-rates = <48000000>;
+				status = "disabled";
+			};
+
+			lpuart6: serial@29860000 {
+				compatible = "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
+				reg = <0x29860000 0x1000>;
+				interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pcc4 IMX8ULP_CLK_LPUART6>;
+				clock-names = "ipg";
+				status = "disabled";
+			};
+
+			lpuart7: serial@29870000 {
+				compatible = "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
+				reg = <0x29870000 0x1000>;
+				interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pcc4 IMX8ULP_CLK_LPUART7>;
+				clock-names = "ipg";
+				status = "disabled";
+			};
+
+			iomuxc1: pinctrl@298c0000 {
+				compatible = "fsl,imx8ulp-iomuxc1";
+				reg = <0x298c0000 0x10000>;
+			};
+
+			usdhc0: mmc@298d0000 {
+				compatible = "fsl,imx8ulp-usdhc", "fsl,imx8mm-usdhc";
+				reg = <0x298d0000 0x10000>;
+				interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&cgc1 IMX8ULP_CLK_XBAR_DIVBUS>,
+					 <&cgc1 IMX8ULP_CLK_XBAR_AD_DIVPLAT>,
+					 <&pcc4 IMX8ULP_CLK_USDHC0>;
+				clock-names = "ipg", "ahb", "per";
+				power-domains = <&scmi_devpd IMX8ULP_PD_USDHC0>;
+				fsl,tuning-start-tap = <20>;
+				fsl,tuning-step= <2>;
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			usdhc1: mmc@298e0000 {
+				compatible = "fsl,imx8ulp-usdhc", "fsl,imx8mm-usdhc";
+				reg = <0x298e0000 0x10000>;
+				interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&cgc1 IMX8ULP_CLK_XBAR_DIVBUS>,
+					 <&cgc1 IMX8ULP_CLK_NIC_PER_DIVPLAT>,
+					 <&pcc4 IMX8ULP_CLK_USDHC1>;
+				clock-names = "ipg", "ahb", "per";
+				power-domains = <&scmi_devpd IMX8ULP_PD_USDHC1>;
+				fsl,tuning-start-tap = <20>;
+				fsl,tuning-step= <2>;
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			usdhc2: mmc@298f0000 {
+				compatible = "fsl,imx8ulp-usdhc", "fsl,imx8mm-usdhc";
+				reg = <0x298f0000 0x10000>;
+				interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&cgc1 IMX8ULP_CLK_XBAR_DIVBUS>,
+					 <&cgc1 IMX8ULP_CLK_NIC_PER_DIVPLAT>,
+					 <&pcc4 IMX8ULP_CLK_USDHC2>;
+				clock-names = "ipg", "ahb", "per";
+				power-domains = <&scmi_devpd IMX8ULP_PD_USDHC2_USB1>;
+				fsl,tuning-start-tap = <20>;
+				fsl,tuning-step= <2>;
+				bus-width = <4>;
+				status = "disabled";
+			};
+		};
+
+		gpioe: gpio@2d000000 {
+				compatible = "fsl,imx8ulp-gpio", "fsl,imx7ulp-gpio";
+				reg = <0x2d000080 0x1000>, <0x2d000040 0x40>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				clocks = <&pcc4 IMX8ULP_CLK_RGPIOE>,
+					 <&pcc4 IMX8ULP_CLK_PCTLE>;
+				clock-names = "gpio", "port";
+				gpio-ranges = <&iomuxc1 0 32 24>;
+		};
+
+		gpiof: gpio@2d010000 {
+				compatible = "fsl,imx8ulp-gpio", "fsl,imx7ulp-gpio";
+				reg = <0x2d010080 0x1000>, <0x2d010040 0x40>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				clocks = <&pcc4 IMX8ULP_CLK_RGPIOF>,
+					 <&pcc4 IMX8ULP_CLK_PCTLF>;
+				clock-names = "gpio", "port";
+				gpio-ranges = <&iomuxc1 0 64 32>;
+		};
+
+		per_bridge5: bus@2d800000 {
+			compatible = "simple-bus";
+			reg = <0x2d800000 0x800000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			cgc2: clock-controller@2da60000 {
+				compatible = "fsl,imx8ulp-cgc2";
+				reg = <0x2da60000 0x10000>;
+				clocks = <&sosc>, <&frosc>;
+				clock-names = "sosc", "frosc";
+				#clock-cells = <1>;
+			};
+
+			pcc5: clock-controller@2da70000 {
+				compatible = "fsl,imx8ulp-pcc5";
+				reg = <0x2da70000 0x10000>;
+				#clock-cells = <1>;
+			};
+		};
+
+		gpiod: gpio@2e200000 {
+			compatible = "fsl,imx8ulp-gpio", "fsl,imx7ulp-gpio";
+			reg = <0x2e200080 0x1000>, <0x2e200040 0x40>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&pcc5 IMX8ULP_CLK_RGPIOD>,
+				 <&pcc5 IMX8ULP_CLK_RGPIOD>;
+			clock-names = "gpio", "port";
+			gpio-ranges = <&iomuxc1 0 0 24>;
+		};
+	};
+};
diff --git a/dts/src/arm64/freescale/mba8mx.dtsi b/dts/src/arm64/freescale/mba8mx.dtsi
new file mode 100644
index 0000000000..f27e3c8de9
--- /dev/null
+++ b/dts/src/arm64/freescale/mba8mx.dtsi
@@ -0,0 +1,282 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2020-2021 TQ-Systems GmbH
+ */
+
+#include <dt-bindings/net/ti-dp83867.h>
+
+/* TQ-Systems GmbH MBa8Mx baseboard */
+
+/ {
+	beeper {
+		compatible = "pwm-beeper";
+		pwms = <&pwm4 0 250000 0>;
+		beeper-hz = <4000>;
+		amp-supply = <&reg_vcc_3v3>;
+	};
+
+	chosen {
+		// bootargs = "console=ttymxc2,115200 earlycon=ec_imx6q,0x30880000,115200";
+		stdout-path = &uart3;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpiobutton>;
+		autorepeat;
+
+		switch1 {
+			label = "switch1";
+			linux,code = <BTN_0>;
+			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		btn2: switch2 {
+			label = "switch2";
+			linux,code = <BTN_1>;
+			gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		switch3 {
+			label = "switch3";
+			linux,code = <BTN_2>;
+			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+	};
+
+	gpio_leds: gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpioled>;
+
+		led1 {
+			label = "led1";
+			gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		led2: led2 {
+			label = "led2";
+			gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	reg_hub_vbus: regulator-hub-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "MBA8MX_HUB_VBUS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_sn65dsi83_1v8: regulator-sn65dsi83-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "SN65DSI83_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&expander0 5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_vcc_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "MBA8MX_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	sound {
+		compatible = "fsl,imx-audio-tlv320aic32x4";
+		model = "tqm-tlv320aic32";
+		ssi-controller = <&sai3>;
+		audio-codec = <&tlv320aic3x04>;
+	};
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	phy-supply = <&reg_vcc_3v3>;
+	fsl,magic-packet;
+	mac-address = [ 00 00 00 00 00 00 ];
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@e {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0xe>;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,dp83867-rxctrl-strap-quirk;
+			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+			enet-phy-lane-no-swap;
+			reset-gpios = <&expander2 7 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <500000>;
+			reset-deassert-us = <500>;
+		};
+	};
+};
+
+&i2c1 {
+	expander0: gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		vcc-supply = <&reg_vcc_3v3>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		sd-mux-oe-hog {
+			gpio-hog;
+			gpios = <8 0>;
+			output-low;
+			line-name = "SD_MUX_EN#";
+		};
+
+		boot-cfg-oe-hog {
+			gpio-hog;
+			gpios = <12 0>;
+			output-high;
+			line-name = "BOOT_CFG_OE#";
+		};
+
+		rst-usb-hub-hog {
+			gpio-hog;
+			gpios = <13 0>;
+			output-high;
+			line-name = "RST_USB_HUB#";
+		};
+	};
+
+	expander1: gpio@24 {
+		compatible = "nxp,pca9555";
+		reg = <0x24>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		vcc-supply = <&reg_vcc_3v3>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	tlv320aic3x04: audio-codec@18 {
+		compatible = "ti,tlv320aic32x4";
+		reg = <0x18>;
+		reset-gpios = <&expander2 0 GPIO_ACTIVE_LOW>;
+		iov-supply = <&reg_vcc_3v3>;
+		ldoin-supply = <&reg_vcc_3v3>;
+	};
+
+	sensor1: sensor@1f {
+		compatible = "nxp,se97", "jedec,jc-42.4-temp";
+		reg = <0x1f>;
+	};
+
+	eeprom3: eeprom@57 {
+		compatible = "nxp,se97b", "atmel,24c02";
+		reg = <0x57>;
+		pagesize = <16>;
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&sai3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai3>;
+	#sound-dai-cells = <0>;
+	assigned-clock-rates = <49152000>;
+	status = "okay";
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+/* console */
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+/* UART4 is assigned to Cortex-M4 */
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	bus-width = <4>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	no-mmc;
+	no-sdio;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	status = "okay";
+};
diff --git a/dts/src/arm64/intel/socfpga_agilex_socdk_nand.dts b/dts/src/arm64/intel/socfpga_agilex_socdk_nand.dts
index cc2dcabf34..57f83481f5 100644
--- a/dts/src/arm64/intel/socfpga_agilex_socdk_nand.dts
+++ b/dts/src/arm64/intel/socfpga_agilex_socdk_nand.dts
@@ -91,24 +91,8 @@
 			reg = <0 0x200000>;
 		};
 		partition@200000 {
-			label = "env";
-			reg = <0x200000 0x40000>;
-		};
-		partition@240000 {
-			label = "dtb";
-			reg = <0x240000 0x40000>;
-		};
-		partition@280000 {
-			label = "kernel";
-			reg = <0x280000 0x2000000>;
-		};
-		partition@2280000 {
-			label = "misc";
-			reg = <0x2280000 0x2000000>;
-		};
-		partition@4280000 {
-			label = "rootfs";
-			reg = <0x4280000 0x3bd80000>;
+			label = "root";
+			reg = <0x200000 0x3fe00000>;
 		};
 	};
 };
diff --git a/dts/src/arm64/intel/socfpga_n5x_socdk.dts b/dts/src/arm64/intel/socfpga_n5x_socdk.dts
index 01f1307ce4..f3c1310dae 100644
--- a/dts/src/arm64/intel/socfpga_n5x_socdk.dts
+++ b/dts/src/arm64/intel/socfpga_n5x_socdk.dts
@@ -29,6 +29,36 @@
 	compatible = "intel,easic-n5x-clkmgr";
 };
 
+&gmac0 {
+	status = "okay";
+	phy-mode = "rgmii";
+	phy-handle = <&phy0>;
+
+	max-frame-size = <9000>;
+
+	mdio0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+		phy0: ethernet-phy@0 {
+			reg = <4>;
+
+			txd0-skew-ps = <0>; /* -420ps */
+			txd1-skew-ps = <0>; /* -420ps */
+			txd2-skew-ps = <0>; /* -420ps */
+			txd3-skew-ps = <0>; /* -420ps */
+			rxd0-skew-ps = <420>; /* 0ps */
+			rxd1-skew-ps = <420>; /* 0ps */
+			rxd2-skew-ps = <420>; /* 0ps */
+			rxd3-skew-ps = <420>; /* 0ps */
+			txen-skew-ps = <0>; /* -420ps */
+			txc-skew-ps = <900>; /* 0ps */
+			rxdv-skew-ps = <420>; /* 0ps */
+			rxc-skew-ps = <1680>; /* 780ps */
+		};
+	};
+};
+
 &mmc {
 	status = "okay";
 	cap-sd-highspeed;
@@ -40,10 +70,51 @@
 	clock-frequency = <25000000>;
 };
 
+&qspi {
+	status = "okay";
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "micron,mt25qu02g", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <100000000>;
+
+		m25p,fast-read;
+		cdns,page-size = <256>;
+		cdns,block-size = <16>;
+		cdns,read-delay = <2>;
+		cdns,tshsl-ns = <50>;
+		cdns,tsd2d-ns = <50>;
+		cdns,tchsh-ns = <4>;
+		cdns,tslch-ns = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			qspi_boot: partition@0 {
+				label = "Boot and fpga data";
+				reg = <0x0 0x03FE0000>;
+			};
+
+			qspi_rootfs: partition@3FE0000 {
+				label = "Root Filesystem - JFFS2";
+				reg = <0x03FE0000 0x0C020000>;
+			};
+		};
+	};
+};
+
 &uart0 {
 	status = "okay";
 };
 
+&usb0 {
+	status = "okay";
+	disable-over-current;
+};
+
 &watchdog0 {
 	status = "okay";
 };
diff --git a/dts/src/arm64/marvell/armada-37xx.dtsi b/dts/src/arm64/marvell/armada-37xx.dtsi
index 9acc5d2b5a..673f4906ee 100644
--- a/dts/src/arm64/marvell/armada-37xx.dtsi
+++ b/dts/src/arm64/marvell/armada-37xx.dtsi
@@ -265,6 +265,8 @@
 					    "lane2_sata_usb3";
 				#address-cells = <1>;
 				#size-cells = <0>;
+				clocks = <&xtalclk>;
+				clock-names = "xtal";
 
 				comphy0: phy@0 {
 					reg = <0>;
diff --git a/dts/src/arm64/marvell/cn9130-crb.dtsi b/dts/src/arm64/marvell/cn9130-crb.dtsi
index 505ae69289..d9f9f2c197 100644
--- a/dts/src/arm64/marvell/cn9130-crb.dtsi
+++ b/dts/src/arm64/marvell/cn9130-crb.dtsi
@@ -17,6 +17,8 @@
 		ethernet0 = &cp0_eth0;
 		ethernet1 = &cp0_eth1;
 		ethernet2 = &cp0_eth2;
+		gpio1 = &cp0_gpio1;
+		gpio2 = &cp0_gpio2;
 	};
 
 	memory@0 {
@@ -71,6 +73,17 @@
 		enable-active-high;
 		regulator-always-on;
 	};
+
+	sfp: sfp {
+		compatible = "sff,sfp";
+		i2c-bus = <&cp0_i2c1>;
+		mod-def0-gpios = <&expander0 3 GPIO_ACTIVE_LOW>;
+		los-gpio = <&expander0 15 GPIO_ACTIVE_HIGH>;
+		tx-disable-gpio = <&expander0 2 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpio = <&cp0_gpio1 24 GPIO_ACTIVE_HIGH>;
+		maximum-power-milliwatt = <3000>;
+		status = "okay";
+	};
 };
 
 &uart0 {
@@ -114,6 +127,14 @@
 	};
 };
 
+&cp0_gpio1 {
+	status = "okay";
+};
+
+&cp0_gpio2 {
+	status = "okay";
+};
+
 &cp0_i2c0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&cp0_i2c0_pins>;
@@ -185,6 +206,125 @@
 	phy0: ethernet-phy@0 {
 		reg = <0>;
 	};
+
+	switch6: switch0@6 {
+		/* Actual device is MV88E6393X */
+		compatible = "marvell,mv88e6190";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <6>;
+		interrupt-parent = <&cp0_gpio1>;
+		interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		dsa,member = <0 0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@1 {
+				reg = <1>;
+				label = "p1";
+				phy-handle = <&switch0phy1>;
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "p2";
+				phy-handle = <&switch0phy2>;
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "p3";
+				phy-handle = <&switch0phy3>;
+			};
+
+			port@4 {
+				reg = <4>;
+				label = "p4";
+				phy-handle = <&switch0phy4>;
+			};
+
+			port@5 {
+				reg = <5>;
+				label = "p5";
+				phy-handle = <&switch0phy5>;
+			};
+
+			port@6 {
+				reg = <6>;
+				label = "p6";
+				phy-handle = <&switch0phy6>;
+			};
+
+			port@7 {
+				reg = <7>;
+				label = "p7";
+				phy-handle = <&switch0phy7>;
+			};
+
+			port@8 {
+				reg = <8>;
+				label = "p8";
+				phy-handle = <&switch0phy8>;
+			};
+
+			port@9 {
+				reg = <9>;
+				label = "p9";
+				phy-mode = "10gbase-r";
+				sfp = <&sfp>;
+				managed = "in-band-status";
+			};
+
+			port@a {
+				reg = <10>;
+				label = "cpu";
+				ethernet = <&cp0_eth0>;
+			};
+
+		};
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switch0phy1: switch0phy1@1 {
+				reg = <0x1>;
+			};
+
+			switch0phy2: switch0phy2@2 {
+				reg = <0x2>;
+			};
+
+			switch0phy3: switch0phy3@3 {
+				reg = <0x3>;
+			};
+
+			switch0phy4: switch0phy4@4 {
+				reg = <0x4>;
+			};
+
+			switch0phy5: switch0phy5@5 {
+				reg = <0x5>;
+			};
+
+			switch0phy6: switch0phy6@6 {
+				reg = <0x6>;
+			};
+
+			switch0phy7: switch0phy7@7 {
+				reg = <0x7>;
+			};
+
+			switch0phy8: switch0phy8@8 {
+				reg = <0x8>;
+			};
+		};
+	};
 };
 
 &cp0_xmdio {
diff --git a/dts/src/arm64/marvell/cn9130.dtsi b/dts/src/arm64/marvell/cn9130.dtsi
index a2b7e5ec97..327b041341 100644
--- a/dts/src/arm64/marvell/cn9130.dtsi
+++ b/dts/src/arm64/marvell/cn9130.dtsi
@@ -11,6 +11,13 @@
 	model = "Marvell Armada CN9130 SoC";
 	compatible = "marvell,cn9130", "marvell,armada-ap807-quad",
 		     "marvell,armada-ap807";
+
+	aliases {
+		gpio1 = &cp0_gpio1;
+		gpio2 = &cp0_gpio2;
+		spi1 = &cp0_spi0;
+		spi2 = &cp0_spi1;
+	};
 };
 
 /*
@@ -35,3 +42,11 @@
 #undef CP11X_PCIE0_BASE
 #undef CP11X_PCIE1_BASE
 #undef CP11X_PCIE2_BASE
+
+&cp0_gpio1 {
+	status = "okay";
+};
+
+&cp0_gpio2 {
+	status = "okay";
+};
diff --git a/dts/src/arm64/mediatek/mt7986a-rfb.dts b/dts/src/arm64/mediatek/mt7986a-rfb.dts
new file mode 100644
index 0000000000..5cd760abff
--- /dev/null
+++ b/dts/src/arm64/mediatek/mt7986a-rfb.dts
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2021 MediaTek Inc.
+ * Author: Sam.Shih <sam.shih@mediatek.com>
+ */
+
+/dts-v1/;
+#include "mt7986a.dtsi"
+
+/ {
+	model = "MediaTek MT7986a RFB";
+	compatible = "mediatek,mt7986a-rfb";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		reg = <0 0x40000000 0 0x40000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "okay";
+};
+
+&pio {
+	uart1_pins: uart1-pins {
+		mux {
+			function = "uart";
+			groups = "uart1";
+		};
+	};
+
+	uart2_pins: uart2-pins {
+		mux {
+			function = "uart";
+			groups = "uart2";
+		};
+	};
+};
diff --git a/dts/src/arm64/mediatek/mt7986a.dtsi b/dts/src/arm64/mediatek/mt7986a.dtsi
new file mode 100644
index 0000000000..b8da76b6ba
--- /dev/null
+++ b/dts/src/arm64/mediatek/mt7986a.dtsi
@@ -0,0 +1,169 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2021 MediaTek Inc.
+ * Author: Sam.Shih <sam.shih@mediatek.com>
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	system_clk: dummy40m {
+		compatible = "fixed-clock";
+		clock-frequency = <40000000>;
+		#clock-cells = <0>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x0>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x1>;
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x2>;
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			enable-method = "psci";
+			compatible = "arm,cortex-a53";
+			reg = <0x3>;
+			#cooling-cells = <2>;
+		};
+	};
+
+	psci {
+		compatible  = "arm,psci-0.2";
+		method      = "smc";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		/* 192 KiB reserved for ARM Trusted Firmware (BL31) */
+		secmon_reserved: secmon@43000000 {
+			reg = <0 0x43000000 0 0x30000>;
+			no-map;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	soc {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		ranges;
+
+		gic: interrupt-controller@c000000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
+			interrupt-controller;
+			reg = <0 0x0c000000 0 0x10000>,  /* GICD */
+			      <0 0x0c080000 0 0x80000>,  /* GICR */
+			      <0 0x0c400000 0 0x2000>,   /* GICC */
+			      <0 0x0c410000 0 0x1000>,   /* GICH */
+			      <0 0x0c420000 0 0x2000>;   /* GICV */
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		watchdog: watchdog@1001c000 {
+			compatible = "mediatek,mt7986-wdt",
+				     "mediatek,mt6589-wdt";
+			reg = <0 0x1001c000 0 0x1000>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			#reset-cells = <1>;
+			status = "disabled";
+		};
+
+		pio: pinctrl@1001f000 {
+			compatible = "mediatek,mt7986a-pinctrl";
+			reg = <0 0x1001f000 0 0x1000>,
+			      <0 0x11c30000 0 0x1000>,
+			      <0 0x11c40000 0 0x1000>,
+			      <0 0x11e20000 0 0x1000>,
+			      <0 0x11e30000 0 0x1000>,
+			      <0 0x11f00000 0 0x1000>,
+			      <0 0x11f10000 0 0x1000>,
+			      <0 0x1000b000 0 0x1000>;
+			reg-names = "gpio", "iocfg_rt", "iocfg_rb", "iocfg_lt",
+				    "iocfg_lb", "iocfg_tr", "iocfg_tl", "eint";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pio 0 0 100>;
+			interrupt-controller;
+			interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-parent = <&gic>;
+			#interrupt-cells = <2>;
+		};
+
+		trng: trng@1020f000 {
+			compatible = "mediatek,mt7986-rng",
+				     "mediatek,mt7623-rng";
+			reg = <0 0x1020f000 0 0x100>;
+			clocks = <&system_clk>;
+			clock-names = "rng";
+			status = "disabled";
+		};
+
+		uart0: serial@11002000 {
+			compatible = "mediatek,mt7986-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11002000 0 0x400>;
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&system_clk>;
+			status = "disabled";
+		};
+
+		uart1: serial@11003000 {
+			compatible = "mediatek,mt7986-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11003000 0 0x400>;
+			interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&system_clk>;
+			status = "disabled";
+		};
+
+		uart2: serial@11004000 {
+			compatible = "mediatek,mt7986-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11004000 0 0x400>;
+			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&system_clk>;
+			status = "disabled";
+		};
+
+	};
+
+};
diff --git a/dts/src/arm64/mediatek/mt7986b-rfb.dts b/dts/src/arm64/mediatek/mt7986b-rfb.dts
new file mode 100644
index 0000000000..5fb752edd7
--- /dev/null
+++ b/dts/src/arm64/mediatek/mt7986b-rfb.dts
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2021 MediaTek Inc.
+ * Author: Sam.Shih <sam.shih@mediatek.com>
+ */
+
+/dts-v1/;
+#include "mt7986b.dtsi"
+
+/ {
+	model = "MediaTek MT7986b RFB";
+	compatible = "mediatek,mt7986b-rfb";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		reg = <0 0x40000000 0 0x40000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/dts/src/arm64/mediatek/mt7986b.dtsi b/dts/src/arm64/mediatek/mt7986b.dtsi
new file mode 100644
index 0000000000..23923b9f89
--- /dev/null
+++ b/dts/src/arm64/mediatek/mt7986b.dtsi
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2021 MediaTek Inc.
+ * Author: Sam.Shih <sam.shih@mediatek.com>
+ */
+
+#include "mt7986a.dtsi"
+
+&pio {
+	compatible = "mediatek,mt7986b-pinctrl";
+	gpio-ranges = <&pio 0 0 41>, <&pio 66 66 35>;
+};
diff --git a/dts/src/arm64/mediatek/mt8173-elm.dtsi b/dts/src/arm64/mediatek/mt8173-elm.dtsi
index e666ebb289..9c75fbb31f 100644
--- a/dts/src/arm64/mediatek/mt8173-elm.dtsi
+++ b/dts/src/arm64/mediatek/mt8173-elm.dtsi
@@ -28,7 +28,7 @@
 		enable-gpios = <&pio 95 GPIO_ACTIVE_HIGH>;
 
 		pinctrl-names = "default";
-		pinctrl-0 = <&disp_pwm0_pins>;
+		pinctrl-0 = <&panel_backlight_en_pins>;
 		status = "okay";
 	};
 
@@ -827,6 +827,12 @@
 		};
 	};
 
+	panel_backlight_en_pins: panel_backlight_en_pins {
+		pins1 {
+			pinmux = <MT8173_PIN_95_PCM_TX__FUNC_GPIO95>;
+		};
+	};
+
 	panel_fixed_pins: panel_fixed_pins {
 		pins1 {
 			pinmux = <MT8173_PIN_41_CMMCLK__FUNC_GPIO41>;
@@ -901,6 +907,8 @@
 };
 
 &pwm0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&disp_pwm0_pins>;
 	status = "okay";
 };
 
diff --git a/dts/src/arm64/mediatek/mt8173.dtsi b/dts/src/arm64/mediatek/mt8173.dtsi
index dee66e5f05..2b7d331a45 100644
--- a/dts/src/arm64/mediatek/mt8173.dtsi
+++ b/dts/src/arm64/mediatek/mt8173.dtsi
@@ -1212,6 +1212,7 @@
 			interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_LOW>;
 			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
 			clocks = <&mmsys CLK_MM_DISP_UFOE>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0xa000 0x1000>;
 		};
 
 		dsi0: dsi@1401b000 {
@@ -1316,6 +1317,7 @@
 			compatible = "mediatek,mt8173-disp-od";
 			reg = <0 0x14023000 0 0x1000>;
 			clocks = <&mmsys CLK_MM_DISP_OD>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1402XXXX 0x3000 0x1000>;
 		};
 
 		hdmi0: hdmi@14025000 {
diff --git a/dts/src/arm64/mediatek/mt8183-evb.dts b/dts/src/arm64/mediatek/mt8183-evb.dts
index 7bc0a6a7fa..f3fd3cca23 100644
--- a/dts/src/arm64/mediatek/mt8183-evb.dts
+++ b/dts/src/arm64/mediatek/mt8183-evb.dts
@@ -36,6 +36,14 @@
 			no-map;
 		};
 	};
+
+	ntc@0 {
+		compatible = "murata,ncp03wf104";
+		pullup-uv = <1800000>;
+		pullup-ohm = <390000>;
+		pulldown-ohm = <0>;
+		io-channels = <&auxadc 0>;
+	};
 };
 
 &auxadc {
diff --git a/dts/src/arm64/mediatek/mt8183-kukui-jacuzzi-cozmo.dts b/dts/src/arm64/mediatek/mt8183-kukui-jacuzzi-cozmo.dts
new file mode 100644
index 0000000000..072133fb0f
--- /dev/null
+++ b/dts/src/arm64/mediatek/mt8183-kukui-jacuzzi-cozmo.dts
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2021 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-jacuzzi.dtsi"
+#include "mt8183-kukui-audio-ts3a227e-max98357a.dtsi"
+
+/ {
+	model = "Google cozmo board";
+	compatible = "google,cozmo", "mediatek,mt8183";
+};
+
+&i2c_tunnel {
+	google,remote-bus = <0>;
+};
+
+&i2c2 {
+	trackpad@2c {
+		compatible = "hid-over-i2c";
+		reg = <0x2c>;
+		hid-descr-addr = <0x20>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&trackpad_pins>;
+
+		interrupts-extended = <&pio 7 IRQ_TYPE_LEVEL_LOW>;
+
+		wakeup-source;
+	};
+};
+
+&qca_wifi {
+	qcom,ath10k-calibration-variant = "GO_COZMO";
+};
diff --git a/dts/src/arm64/mediatek/mt8183-kukui-jacuzzi-fennel-sku1.dts b/dts/src/arm64/mediatek/mt8183-kukui-jacuzzi-fennel-sku1.dts
index ef6257c9a2..dec11a4eb5 100644
--- a/dts/src/arm64/mediatek/mt8183-kukui-jacuzzi-fennel-sku1.dts
+++ b/dts/src/arm64/mediatek/mt8183-kukui-jacuzzi-fennel-sku1.dts
@@ -5,6 +5,7 @@
 
 /dts-v1/;
 #include "mt8183-kukui-jacuzzi-fennel.dtsi"
+#include "mt8183-kukui-audio-da7219-rt1015p.dtsi"
 
 / {
 	model = "Google fennel sku1 board";
diff --git a/dts/src/arm64/mediatek/mt8183-kukui-jacuzzi-fennel-sku6.dts b/dts/src/arm64/mediatek/mt8183-kukui-jacuzzi-fennel-sku6.dts
index 899c2e4238..37e6e58f63 100644
--- a/dts/src/arm64/mediatek/mt8183-kukui-jacuzzi-fennel-sku6.dts
+++ b/dts/src/arm64/mediatek/mt8183-kukui-jacuzzi-fennel-sku6.dts
@@ -5,6 +5,7 @@
 
 /dts-v1/;
 #include "mt8183-kukui-jacuzzi-fennel.dtsi"
+#include "mt8183-kukui-audio-da7219-rt1015p.dtsi"
 
 / {
 	model = "Google fennel sku6 board";
diff --git a/dts/src/arm64/mediatek/mt8183-kukui-jacuzzi-fennel-sku7.dts b/dts/src/arm64/mediatek/mt8183-kukui-jacuzzi-fennel-sku7.dts
new file mode 100644
index 0000000000..0e09604004
--- /dev/null
+++ b/dts/src/arm64/mediatek/mt8183-kukui-jacuzzi-fennel-sku7.dts
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2021 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-jacuzzi-fennel.dtsi"
+#include "mt8183-kukui-audio-ts3a227e-rt1015p.dtsi"
+
+/ {
+	model = "Google fennel sku7 board";
+	compatible = "google,fennel-sku7", "google,fennel", "mediatek,mt8183";
+};
+
+&touchscreen {
+	status = "okay";
+
+	compatible = "hid-over-i2c";
+	reg = <0x10>;
+	interrupt-parent = <&pio>;
+	interrupts = <155 IRQ_TYPE_LEVEL_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&touchscreen_pins>;
+
+	post-power-on-delay-ms = <10>;
+	hid-descr-addr = <0x0001>;
+};
+
+
+&qca_wifi {
+	qcom,ath10k-calibration-variant = "GO_FENNEL";
+};
+
diff --git a/dts/src/arm64/mediatek/mt8183-kukui-jacuzzi-fennel.dtsi b/dts/src/arm64/mediatek/mt8183-kukui-jacuzzi-fennel.dtsi
index 577519a775..bbe6c338f4 100644
--- a/dts/src/arm64/mediatek/mt8183-kukui-jacuzzi-fennel.dtsi
+++ b/dts/src/arm64/mediatek/mt8183-kukui-jacuzzi-fennel.dtsi
@@ -5,7 +5,6 @@
 
 /dts-v1/;
 #include "mt8183-kukui-jacuzzi.dtsi"
-#include "mt8183-kukui-audio-da7219-rt1015p.dtsi"
 
 &mt6358codec {
 	mediatek,dmic-mode = <1>; /* one-wire */
diff --git a/dts/src/arm64/mediatek/mt8183-kukui-jacuzzi-fennel14-sku2.dts b/dts/src/arm64/mediatek/mt8183-kukui-jacuzzi-fennel14-sku2.dts
new file mode 100644
index 0000000000..3fc5a6181d
--- /dev/null
+++ b/dts/src/arm64/mediatek/mt8183-kukui-jacuzzi-fennel14-sku2.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2021 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-jacuzzi-fennel.dtsi"
+#include "mt8183-kukui-audio-ts3a227e-rt1015p.dtsi"
+
+/ {
+	model = "Google fennel14 sku2 board";
+	compatible = "google,fennel-sku2", "google,fennel", "mediatek,mt8183";
+};
+
+&qca_wifi {
+	qcom,ath10k-calibration-variant = "GO_FENNEL14";
+};
diff --git a/dts/src/arm64/mediatek/mt8183-kukui-jacuzzi-fennel14.dts b/dts/src/arm64/mediatek/mt8183-kukui-jacuzzi-fennel14.dts
index e8c41f6b4b..23ad0b91e9 100644
--- a/dts/src/arm64/mediatek/mt8183-kukui-jacuzzi-fennel14.dts
+++ b/dts/src/arm64/mediatek/mt8183-kukui-jacuzzi-fennel14.dts
@@ -5,6 +5,7 @@
 
 /dts-v1/;
 #include "mt8183-kukui-jacuzzi-fennel.dtsi"
+#include "mt8183-kukui-audio-da7219-rt1015p.dtsi"
 
 / {
 	model = "Google fennel14 sku0 board";
diff --git a/dts/src/arm64/mediatek/mt8183-kukui-jacuzzi.dtsi b/dts/src/arm64/mediatek/mt8183-kukui-jacuzzi.dtsi
index d8826c82bc..8f7bf33f60 100644
--- a/dts/src/arm64/mediatek/mt8183-kukui-jacuzzi.dtsi
+++ b/dts/src/arm64/mediatek/mt8183-kukui-jacuzzi.dtsi
@@ -9,7 +9,6 @@
 	panel: panel {
 		compatible = "auo,b116xw03";
 		power-supply = <&pp3300_panel>;
-		ddc-i2c-bus = <&i2c4>;
 		backlight = <&backlight_lcd0>;
 
 		port {
diff --git a/dts/src/arm64/mediatek/mt8183-kukui-kakadu-sku22.dts b/dts/src/arm64/mediatek/mt8183-kukui-kakadu-sku22.dts
new file mode 100644
index 0000000000..3a724e6f91
--- /dev/null
+++ b/dts/src/arm64/mediatek/mt8183-kukui-kakadu-sku22.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2021 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-kakadu.dtsi"
+#include "mt8183-kukui-audio-rt1015p.dtsi"
+
+/ {
+	model = "MediaTek kakadu board sku22";
+	compatible = "google,kakadu-rev3-sku22", "google,kakadu-rev2-sku22",
+		     "google,kakadu", "mediatek,mt8183";
+};
+
+&sound {
+	compatible = "mediatek,mt8183_mt6358_ts3a227_rt1015p";
+};
+
diff --git a/dts/src/arm64/mediatek/mt8183-kukui.dtsi b/dts/src/arm64/mediatek/mt8183-kukui.dtsi
index b42d81d26d..0f9480f912 100644
--- a/dts/src/arm64/mediatek/mt8183-kukui.dtsi
+++ b/dts/src/arm64/mediatek/mt8183-kukui.dtsi
@@ -157,33 +157,33 @@
 		#thermal-sensor-cells = <0>;
 		io-channels = <&auxadc 0>;
 		io-channel-names = "sensor-channel";
-		temperature-lookup-table = <    (-5000) 4241
-						0 4063
-						5000 3856
-						10000 3621
-						15000 3364
-						20000 3091
-						25000 2810
-						30000 2526
-						35000 2247
-						40000 1982
-						45000 1734
-						50000 1507
-						55000 1305
-						60000 1122
-						65000 964
-						70000 827
-						75000 710
-						80000 606
-						85000 519
-						90000 445
-						95000 382
-						100000 330
-						105000 284
-						110000 245
-						115000 213
-						120000 183
-						125000 161>;
+		temperature-lookup-table = <    (-5000) 1553
+						0 1488
+						5000 1412
+						10000 1326
+						15000 1232
+						20000 1132
+						25000 1029
+						30000 925
+						35000 823
+						40000 726
+						45000 635
+						50000 552
+						55000 478
+						60000 411
+						65000 353
+						70000 303
+						75000 260
+						80000 222
+						85000 190
+						90000 163
+						95000 140
+						100000 121
+						105000 104
+						110000 90
+						115000 78
+						120000 67
+						125000 59>;
 	};
 
 	tboard_thermistor2: thermal-sensor2 {
@@ -191,33 +191,33 @@
 		#thermal-sensor-cells = <0>;
 		io-channels = <&auxadc 1>;
 		io-channel-names = "sensor-channel";
-		temperature-lookup-table = <    (-5000) 4241
-						0 4063
-						5000 3856
-						10000 3621
-						15000 3364
-						20000 3091
-						25000 2810
-						30000 2526
-						35000 2247
-						40000 1982
-						45000 1734
-						50000 1507
-						55000 1305
-						60000 1122
-						65000 964
-						70000 827
-						75000 710
-						80000 606
-						85000 519
-						90000 445
-						95000 382
-						100000 330
-						105000 284
-						110000 245
-						115000 213
-						120000 183
-						125000 161>;
+		temperature-lookup-table = <    (-5000) 1553
+						0 1488
+						5000 1412
+						10000 1326
+						15000 1232
+						20000 1132
+						25000 1029
+						30000 925
+						35000 823
+						40000 726
+						45000 635
+						50000 552
+						55000 478
+						60000 411
+						65000 353
+						70000 303
+						75000 260
+						80000 222
+						85000 190
+						90000 163
+						95000 140
+						100000 121
+						105000 104
+						110000 90
+						115000 78
+						120000 67
+						125000 59>;
 	};
 };
 
@@ -813,7 +813,7 @@
 
 	cros_ec {
 		compatible = "google,cros-ec-rpmsg";
-		mtk,rpmsg-name = "cros-ec-rpmsg";
+		mediatek,rpmsg-name = "cros-ec-rpmsg";
 	};
 };
 
@@ -886,6 +886,20 @@
 		cbas {
 			compatible = "google,cros-cbas";
 		};
+
+		typec {
+			compatible = "google,cros-ec-typec";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			usb_c0: connector@0 {
+				compatible = "usb-c-connector";
+				reg = <0>;
+				power-role = "dual";
+				data-role = "host";
+				try-power-role = "sink";
+			};
+		};
 	};
 };
 
diff --git a/dts/src/arm64/mediatek/mt8183.dtsi b/dts/src/arm64/mediatek/mt8183.dtsi
index ba4584faca..00f2ddd245 100644
--- a/dts/src/arm64/mediatek/mt8183.dtsi
+++ b/dts/src/arm64/mediatek/mt8183.dtsi
@@ -367,6 +367,70 @@
 			reg = <0 0x0c530a80 0 0x50>;
 		};
 
+		cpu_debug0: cpu-debug@d410000 {
+			compatible = "arm,coresight-cpu-debug", "arm,primecell";
+			reg = <0x0 0xd410000 0x0 0x1000>;
+			clocks = <&infracfg CLK_INFRA_DEBUGSYS>;
+			clock-names = "apb_pclk";
+			cpu = <&cpu0>;
+		};
+
+		cpu_debug1: cpu-debug@d510000 {
+			compatible = "arm,coresight-cpu-debug", "arm,primecell";
+			reg = <0x0 0xd510000 0x0 0x1000>;
+			clocks = <&infracfg CLK_INFRA_DEBUGSYS>;
+			clock-names = "apb_pclk";
+			cpu = <&cpu1>;
+		};
+
+		cpu_debug2: cpu-debug@d610000 {
+			compatible = "arm,coresight-cpu-debug", "arm,primecell";
+			reg = <0x0 0xd610000 0x0 0x1000>;
+			clocks = <&infracfg CLK_INFRA_DEBUGSYS>;
+			clock-names = "apb_pclk";
+			cpu = <&cpu2>;
+		};
+
+		cpu_debug3: cpu-debug@d710000 {
+			compatible = "arm,coresight-cpu-debug", "arm,primecell";
+			reg = <0x0 0xd710000 0x0 0x1000>;
+			clocks = <&infracfg CLK_INFRA_DEBUGSYS>;
+			clock-names = "apb_pclk";
+			cpu = <&cpu3>;
+		};
+
+		cpu_debug4: cpu-debug@d810000 {
+			compatible = "arm,coresight-cpu-debug", "arm,primecell";
+			reg = <0x0 0xd810000 0x0 0x1000>;
+			clocks = <&infracfg CLK_INFRA_DEBUGSYS>;
+			clock-names = "apb_pclk";
+			cpu = <&cpu4>;
+		};
+
+		cpu_debug5: cpu-debug@d910000 {
+			compatible = "arm,coresight-cpu-debug", "arm,primecell";
+			reg = <0x0 0xd910000 0x0 0x1000>;
+			clocks = <&infracfg CLK_INFRA_DEBUGSYS>;
+			clock-names = "apb_pclk";
+			cpu = <&cpu5>;
+		};
+
+		cpu_debug6: cpu-debug@da10000 {
+			compatible = "arm,coresight-cpu-debug", "arm,primecell";
+			reg = <0x0 0xda10000 0x0 0x1000>;
+			clocks = <&infracfg CLK_INFRA_DEBUGSYS>;
+			clock-names = "apb_pclk";
+			cpu = <&cpu6>;
+		};
+
+		cpu_debug7: cpu-debug@db10000 {
+			compatible = "arm,coresight-cpu-debug", "arm,primecell";
+			reg = <0x0 0xdb10000 0x0 0x1000>;
+			clocks = <&infracfg CLK_INFRA_DEBUGSYS>;
+			clock-names = "apb_pclk";
+			cpu = <&cpu7>;
+		};
+
 		topckgen: syscon@10000000 {
 			compatible = "mediatek,mt8183-topckgen", "syscon";
 			reg = <0 0x10000000 0 0x1000>;
diff --git a/dts/src/arm64/mediatek/mt8192.dtsi b/dts/src/arm64/mediatek/mt8192.dtsi
index c7c7d4e017..53d790c335 100644
--- a/dts/src/arm64/mediatek/mt8192.dtsi
+++ b/dts/src/arm64/mediatek/mt8192.dtsi
@@ -479,7 +479,7 @@
 			#clock-cells = <1>;
 		};
 
-		i2c3: i2c3@11cb0000 {
+		i2c3: i2c@11cb0000 {
 			compatible = "mediatek,mt8192-i2c";
 			reg = <0 0x11cb0000 0 0x1000>,
 			      <0 0x10217300 0 0x80>;
@@ -498,7 +498,7 @@
 			#clock-cells = <1>;
 		};
 
-		i2c7: i2c7@11d00000 {
+		i2c7: i2c@11d00000 {
 			compatible = "mediatek,mt8192-i2c";
 			reg = <0 0x11d00000 0 0x1000>,
 			      <0 0x10217600 0 0x180>;
@@ -511,7 +511,7 @@
 			status = "disabled";
 		};
 
-		i2c8: i2c8@11d01000 {
+		i2c8: i2c@11d01000 {
 			compatible = "mediatek,mt8192-i2c";
 			reg = <0 0x11d01000 0 0x1000>,
 			      <0 0x10217780 0 0x180>;
@@ -524,7 +524,7 @@
 			status = "disabled";
 		};
 
-		i2c9: i2c9@11d02000 {
+		i2c9: i2c@11d02000 {
 			compatible = "mediatek,mt8192-i2c";
 			reg = <0 0x11d02000 0 0x1000>,
 			      <0 0x10217900 0 0x180>;
@@ -543,7 +543,7 @@
 			#clock-cells = <1>;
 		};
 
-		i2c1: i2c1@11d20000 {
+		i2c1: i2c@11d20000 {
 			compatible = "mediatek,mt8192-i2c";
 			reg = <0 0x11d20000 0 0x1000>,
 			      <0 0x10217100 0 0x80>;
@@ -556,7 +556,7 @@
 			status = "disabled";
 		};
 
-		i2c2: i2c2@11d21000 {
+		i2c2: i2c@11d21000 {
 			compatible = "mediatek,mt8192-i2c";
 			reg = <0 0x11d21000 0 0x1000>,
 			      <0 0x10217180 0 0x180>;
@@ -569,7 +569,7 @@
 			status = "disabled";
 		};
 
-		i2c4: i2c4@11d22000 {
+		i2c4: i2c@11d22000 {
 			compatible = "mediatek,mt8192-i2c";
 			reg = <0 0x11d22000 0 0x1000>,
 			      <0 0x10217380 0 0x180>;
@@ -588,7 +588,7 @@
 			#clock-cells = <1>;
 		};
 
-		i2c5: i2c5@11e00000 {
+		i2c5: i2c@11e00000 {
 			compatible = "mediatek,mt8192-i2c";
 			reg = <0 0x11e00000 0 0x1000>,
 			      <0 0x10217500 0 0x80>;
@@ -607,7 +607,7 @@
 			#clock-cells = <1>;
 		};
 
-		i2c0: i2c0@11f00000 {
+		i2c0: i2c@11f00000 {
 			compatible = "mediatek,mt8192-i2c";
 			reg = <0 0x11f00000 0 0x1000>,
 			      <0 0x10217080 0 0x80>;
@@ -620,7 +620,7 @@
 			status = "disabled";
 		};
 
-		i2c6: i2c6@11f01000 {
+		i2c6: i2c@11f01000 {
 			compatible = "mediatek,mt8192-i2c";
 			reg = <0 0x11f01000 0 0x1000>,
 			      <0 0x10217580 0 0x80>;
diff --git a/dts/src/arm64/mediatek/mt8516.dtsi b/dts/src/arm64/mediatek/mt8516.dtsi
index bbe5a1419e..d1b67c82d7 100644
--- a/dts/src/arm64/mediatek/mt8516.dtsi
+++ b/dts/src/arm64/mediatek/mt8516.dtsi
@@ -345,14 +345,9 @@
 			reg = <0 0x11009000 0 0x90>,
 			      <0 0x11000180 0 0x80>;
 			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_LOW>;
-			clocks = <&topckgen CLK_TOP_AHB_INFRA_D2>,
-				 <&infracfg CLK_IFR_I2C0_SEL>,
-				 <&topckgen CLK_TOP_I2C0>,
+			clocks = <&topckgen CLK_TOP_I2C0>,
 				 <&topckgen CLK_TOP_APDMA>;
-			clock-names = "main-source",
-				      "main-sel",
-				      "main",
-				      "dma";
+			clock-names = "main", "dma";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			status = "disabled";
@@ -364,14 +359,9 @@
 			reg = <0 0x1100a000 0 0x90>,
 			      <0 0x11000200 0 0x80>;
 			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_LOW>;
-			clocks = <&topckgen CLK_TOP_AHB_INFRA_D2>,
-				 <&infracfg CLK_IFR_I2C1_SEL>,
-				 <&topckgen CLK_TOP_I2C1>,
+			clocks = <&topckgen CLK_TOP_I2C1>,
 				 <&topckgen CLK_TOP_APDMA>;
-			clock-names = "main-source",
-				      "main-sel",
-				      "main",
-				      "dma";
+			clock-names = "main", "dma";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			status = "disabled";
@@ -383,14 +373,9 @@
 			reg = <0 0x1100b000 0 0x90>,
 			      <0 0x11000280 0 0x80>;
 			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_LOW>;
-			clocks = <&topckgen CLK_TOP_AHB_INFRA_D2>,
-				 <&infracfg CLK_IFR_I2C2_SEL>,
-				 <&topckgen CLK_TOP_I2C2>,
+			clocks = <&topckgen CLK_TOP_I2C2>,
 				 <&topckgen CLK_TOP_APDMA>;
-			clock-names = "main-source",
-				      "main-sel",
-				      "main",
-				      "dma";
+			clock-names = "main", "dma";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			status = "disabled";
diff --git a/dts/src/arm64/nvidia/tegra132-norrin.dts b/dts/src/arm64/nvidia/tegra132-norrin.dts
index 8a51751526..f16acb4cab 100644
--- a/dts/src/arm64/nvidia/tegra132-norrin.dts
+++ b/dts/src/arm64/nvidia/tegra132-norrin.dts
@@ -564,7 +564,7 @@
 			pinctrl-names = "default";
 			pinctrl-0 = <&as3722_default>;
 
-			as3722_default: pinmux@0 {
+			as3722_default: pinmux {
 				gpio0 {
 					pins = "gpio0";
 					function = "gpio";
@@ -770,7 +770,7 @@
 
 				google,remote-bus = <0>;
 
-				charger: bq24735 {
+				charger: bq24735@9 {
 					compatible = "ti,bq24735";
 					reg = <0x9>;
 					interrupt-parent = <&gpio>;
@@ -781,7 +781,7 @@
 							GPIO_ACTIVE_HIGH>;
 				};
 
-				battery: smart-battery {
+				battery: smart-battery@b {
 					compatible = "sbs,sbs-battery";
 					reg = <0xb>;
 					sbs,i2c-retry-count = <2>;
@@ -885,14 +885,12 @@
 	pmc@7000e400 {
 		nvidia,invert-interrupt;
 		nvidia,suspend-mode = <0>;
-		#wake-cells = <3>;
 		nvidia,cpu-pwr-good-time = <500>;
 		nvidia,cpu-pwr-off-time = <300>;
 		nvidia,core-pwr-good-time = <641 3845>;
 		nvidia,core-pwr-off-time = <61036>;
 		nvidia,core-power-req-active-high;
 		nvidia,sys-clock-req-active-high;
-		nvidia,reset-gpio = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
 	};
 
 	usb@70090000 {
@@ -1023,7 +1021,7 @@
 		default-brightness-level = <6>;
 	};
 
-	clk32k_in: clock@0 {
+	clk32k_in: clock-32k {
 		compatible = "fixed-clock";
 		clock-frequency = <32768>;
 		#clock-cells = <0>;
@@ -1057,7 +1055,7 @@
 		ddc-i2c-bus = <&dpaux>;
 	};
 
-	vdd_mux: regulator@0 {
+	vdd_mux: regulator-vdd-mux {
 		compatible = "regulator-fixed";
 		regulator-name = "+VDD_MUX";
 		regulator-min-microvolt = <19000000>;
@@ -1066,7 +1064,7 @@
 		regulator-boot-on;
 	};
 
-	vdd_5v0_sys: regulator@1 {
+	vdd_5v0_sys: regulator-vdd-5v0-sys {
 		compatible = "regulator-fixed";
 		regulator-name = "+5V_SYS";
 		regulator-min-microvolt = <5000000>;
@@ -1076,7 +1074,7 @@
 		vin-supply = <&vdd_mux>;
 	};
 
-	vdd_3v3_sys: regulator@2 {
+	vdd_3v3_sys: regulator-vdd-3v3-sys {
 		compatible = "regulator-fixed";
 		regulator-name = "+3.3V_SYS";
 		regulator-min-microvolt = <3300000>;
@@ -1086,7 +1084,7 @@
 		vin-supply = <&vdd_mux>;
 	};
 
-	vdd_3v3_run: regulator@3 {
+	vdd_3v3_run: regulator-vdd-3v3-run {
 		compatible = "regulator-fixed";
 		regulator-name = "+3.3V_RUN";
 		regulator-min-microvolt = <3300000>;
@@ -1098,7 +1096,7 @@
 		vin-supply = <&vdd_3v3_sys>;
 	};
 
-	vdd_3v3_hdmi: regulator@4 {
+	vdd_3v3_hdmi: regulator-vdd-3v3-hdmi {
 		compatible = "regulator-fixed";
 		regulator-name = "+3.3V_AVDD_HDMI_AP_GATED";
 		regulator-min-microvolt = <3300000>;
@@ -1106,7 +1104,7 @@
 		vin-supply = <&vdd_3v3_run>;
 	};
 
-	vdd_led: regulator@5 {
+	vdd_led: regulator-vdd-led {
 		compatible = "regulator-fixed";
 		regulator-name = "+VDD_LED";
 		regulator-min-microvolt = <3300000>;
@@ -1116,7 +1114,7 @@
 		vin-supply = <&vdd_mux>;
 	};
 
-	vdd_usb1_vbus: regulator@6 {
+	vdd_usb1_vbus: regulator-vdd-usb1-vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "+5V_USB_HS";
 		regulator-min-microvolt = <5000000>;
@@ -1127,7 +1125,7 @@
 		vin-supply = <&vdd_5v0_sys>;
 	};
 
-	vdd_usb3_vbus: regulator@7 {
+	vdd_usb3_vbus: regulator-vdd-usb3-vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "+5V_USB_SS";
 		regulator-min-microvolt = <5000000>;
@@ -1138,7 +1136,7 @@
 		vin-supply = <&vdd_5v0_sys>;
 	};
 
-	vdd_3v3_panel: regulator@8 {
+	vdd_3v3_panel: regulator-vdd-3v3-panel {
 		compatible = "regulator-fixed";
 		regulator-name = "+3.3V_PANEL";
 		regulator-min-microvolt = <3300000>;
@@ -1148,7 +1146,7 @@
 		vin-supply = <&vdd_3v3_sys>;
 	};
 
-	vdd_hdmi_pll: regulator@9 {
+	vdd_hdmi_pll: regulator-vdd-hdmi-pll {
 		compatible = "regulator-fixed";
 		regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL_AP_GATE";
 		regulator-min-microvolt = <1050000>;
@@ -1157,7 +1155,7 @@
 		vin-supply = <&vdd_1v05_run>;
 	};
 
-	vdd_5v0_hdmi: regulator@10 {
+	vdd_5v0_hdmi: regulator-vdd-5v0-hdmi {
 		compatible = "regulator-fixed";
 		regulator-name = "+5V_HDMI_CON";
 		regulator-min-microvolt = <5000000>;
@@ -1167,7 +1165,7 @@
 		vin-supply = <&vdd_5v0_sys>;
 	};
 
-	vdd_5v0_ts: regulator@11 {
+	vdd_5v0_ts: regulator-vdd-5v0-ts {
 		compatible = "regulator-fixed";
 		regulator-name = "+5V_VDD_TS";
 		regulator-min-microvolt = <5000000>;
@@ -1178,7 +1176,7 @@
 		enable-active-high;
 	};
 
-	vdd_3v3_lp0: regulator@12 {
+	vdd_3v3_lp0: regulator-vdd-3v3-lp0 {
 		compatible = "regulator-fixed";
 		regulator-name = "+3.3V_LP0";
 		regulator-min-microvolt = <3300000>;
diff --git a/dts/src/arm64/nvidia/tegra132-peripherals-opp.dtsi b/dts/src/arm64/nvidia/tegra132-peripherals-opp.dtsi
new file mode 100644
index 0000000000..66ffb7f8aa
--- /dev/null
+++ b/dts/src/arm64/nvidia/tegra132-peripherals-opp.dtsi
@@ -0,0 +1,426 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/ {
+	/* EMC DVFS OPP table */
+	emc_icc_dvfs_opp_table: opp-table-dvfs0 {
+		compatible = "operating-points-v2";
+
+		opp-12750000-800 {
+			opp-microvolt = <800000 800000 1150000>;
+			opp-hz = /bits/ 64 <12750000>;
+			opp-supported-hw = <0x0003>;
+		};
+
+		opp-12750000-950 {
+			opp-microvolt = <950000 950000 1150000>;
+			opp-hz = /bits/ 64 <12750000>;
+			opp-supported-hw = <0x0008>;
+		};
+
+		opp-12750000-1050 {
+			opp-microvolt = <1050000 1050000 1150000>;
+			opp-hz = /bits/ 64 <12750000>;
+			opp-supported-hw = <0x0010>;
+		};
+
+		opp-12750000-1110 {
+			opp-microvolt = <1110000 1110000 1150000>;
+			opp-hz = /bits/ 64 <12750000>;
+			opp-supported-hw = <0x0004>;
+		};
+
+		opp-20400000-800 {
+			opp-microvolt = <800000 800000 1150000>;
+			opp-hz = /bits/ 64 <20400000>;
+			opp-supported-hw = <0x0003>;
+		};
+
+		opp-20400000-950 {
+			opp-microvolt = <950000 950000 1150000>;
+			opp-hz = /bits/ 64 <20400000>;
+			opp-supported-hw = <0x0008>;
+		};
+
+		opp-20400000-1050 {
+			opp-microvolt = <1050000 1050000 1150000>;
+			opp-hz = /bits/ 64 <20400000>;
+			opp-supported-hw = <0x0010>;
+		};
+
+		opp-20400000-1110 {
+			opp-microvolt = <1110000 1110000 1150000>;
+			opp-hz = /bits/ 64 <20400000>;
+			opp-supported-hw = <0x0004>;
+		};
+
+		opp-40800000-800 {
+			opp-microvolt = <800000 800000 1150000>;
+			opp-hz = /bits/ 64 <40800000>;
+			opp-supported-hw = <0x0003>;
+		};
+
+		opp-40800000-950 {
+			opp-microvolt = <950000 950000 1150000>;
+			opp-hz = /bits/ 64 <40800000>;
+			opp-supported-hw = <0x0008>;
+		};
+
+		opp-40800000-1050 {
+			opp-microvolt = <1050000 1050000 1150000>;
+			opp-hz = /bits/ 64 <40800000>;
+			opp-supported-hw = <0x0010>;
+		};
+
+		opp-40800000-1110 {
+			opp-microvolt = <1110000 1110000 1150000>;
+			opp-hz = /bits/ 64 <40800000>;
+			opp-supported-hw = <0x0004>;
+		};
+
+		opp-68000000-800 {
+			opp-microvolt = <800000 800000 1150000>;
+			opp-hz = /bits/ 64 <68000000>;
+			opp-supported-hw = <0x0003>;
+		};
+
+		opp-68000000-950 {
+			opp-microvolt = <950000 950000 1150000>;
+			opp-hz = /bits/ 64 <68000000>;
+			opp-supported-hw = <0x0008>;
+		};
+
+		opp-68000000-1050 {
+			opp-microvolt = <1050000 1050000 1150000>;
+			opp-hz = /bits/ 64 <68000000>;
+			opp-supported-hw = <0x0010>;
+		};
+
+		opp-68000000-1110 {
+			opp-microvolt = <1110000 1110000 1150000>;
+			opp-hz = /bits/ 64 <68000000>;
+			opp-supported-hw = <0x0004>;
+		};
+
+		opp-102000000-800 {
+			opp-microvolt = <800000 800000 1150000>;
+			opp-hz = /bits/ 64 <102000000>;
+			opp-supported-hw = <0x0003>;
+		};
+
+		opp-102000000-950 {
+			opp-microvolt = <950000 950000 1150000>;
+			opp-hz = /bits/ 64 <102000000>;
+			opp-supported-hw = <0x0008>;
+		};
+
+		opp-102000000-1050 {
+			opp-microvolt = <1050000 1050000 1150000>;
+			opp-hz = /bits/ 64 <102000000>;
+			opp-supported-hw = <0x0010>;
+		};
+
+		opp-102000000-1110 {
+			opp-microvolt = <1110000 1110000 1150000>;
+			opp-hz = /bits/ 64 <102000000>;
+			opp-supported-hw = <0x0004>;
+		};
+
+		opp-204000000-800 {
+			opp-microvolt = <800000 800000 1150000>;
+			opp-hz = /bits/ 64 <204000000>;
+			opp-supported-hw = <0x0003>;
+			opp-suspend;
+		};
+
+		opp-204000000-950 {
+			opp-microvolt = <950000 950000 1150000>;
+			opp-hz = /bits/ 64 <204000000>;
+			opp-supported-hw = <0x0008>;
+			opp-suspend;
+		};
+
+		opp-204000000-1050 {
+			opp-microvolt = <1050000 1050000 1150000>;
+			opp-hz = /bits/ 64 <204000000>;
+			opp-supported-hw = <0x0010>;
+			opp-suspend;
+		};
+
+		opp-204000000-1110 {
+			opp-microvolt = <1110000 1110000 1150000>;
+			opp-hz = /bits/ 64 <204000000>;
+			opp-supported-hw = <0x0004>;
+			opp-suspend;
+		};
+
+		opp-264000000-800 {
+			opp-microvolt = <800000 800000 1150000>;
+			opp-hz = /bits/ 64 <264000000>;
+			opp-supported-hw = <0x0003>;
+		};
+
+		opp-264000000-950 {
+			opp-microvolt = <950000 950000 1150000>;
+			opp-hz = /bits/ 64 <264000000>;
+			opp-supported-hw = <0x0008>;
+		};
+
+		opp-264000000-1050 {
+			opp-microvolt = <1050000 1050000 1150000>;
+			opp-hz = /bits/ 64 <264000000>;
+			opp-supported-hw = <0x0010>;
+		};
+
+		opp-264000000-1110 {
+			opp-microvolt = <1110000 1110000 1150000>;
+			opp-hz = /bits/ 64 <264000000>;
+			opp-supported-hw = <0x0004>;
+		};
+
+		opp-300000000-850 {
+			opp-microvolt = <850000 850000 1150000>;
+			opp-hz = /bits/ 64 <300000000>;
+			opp-supported-hw = <0x0003>;
+		};
+
+		opp-300000000-950 {
+			opp-microvolt = <950000 950000 1150000>;
+			opp-hz = /bits/ 64 <300000000>;
+			opp-supported-hw = <0x0008>;
+		};
+
+		opp-300000000-1050 {
+			opp-microvolt = <1050000 1050000 1150000>;
+			opp-hz = /bits/ 64 <300000000>;
+			opp-supported-hw = <0x0010>;
+		};
+
+		opp-300000000-1110 {
+			opp-microvolt = <1110000 1110000 1150000>;
+			opp-hz = /bits/ 64 <300000000>;
+			opp-supported-hw = <0x0004>;
+		};
+
+		opp-348000000-850 {
+			opp-microvolt = <850000 850000 1150000>;
+			opp-hz = /bits/ 64 <348000000>;
+			opp-supported-hw = <0x0003>;
+		};
+
+		opp-348000000-950 {
+			opp-microvolt = <950000 950000 1150000>;
+			opp-hz = /bits/ 64 <348000000>;
+			opp-supported-hw = <0x0008>;
+		};
+
+		opp-348000000-1050 {
+			opp-microvolt = <1050000 1050000 1150000>;
+			opp-hz = /bits/ 64 <348000000>;
+			opp-supported-hw = <0x0010>;
+		};
+
+		opp-348000000-1110 {
+			opp-microvolt = <1110000 1110000 1150000>;
+			opp-hz = /bits/ 64 <348000000>;
+			opp-supported-hw = <0x0004>;
+		};
+
+		opp-396000000-950 {
+			opp-microvolt = <950000 950000 1150000>;
+			opp-hz = /bits/ 64 <396000000>;
+			opp-supported-hw = <0x0008>;
+		};
+
+		opp-396000000-1000 {
+			opp-microvolt = <1000000 1000000 1150000>;
+			opp-hz = /bits/ 64 <396000000>;
+			opp-supported-hw = <0x0003>;
+		};
+
+		opp-396000000-1050 {
+			opp-microvolt = <1050000 1050000 1150000>;
+			opp-hz = /bits/ 64 <396000000>;
+			opp-supported-hw = <0x0010>;
+		};
+
+		opp-396000000-1110 {
+			opp-microvolt = <1110000 1110000 1150000>;
+			opp-hz = /bits/ 64 <396000000>;
+			opp-supported-hw = <0x0004>;
+		};
+
+		opp-528000000-950 {
+			opp-microvolt = <950000 950000 1150000>;
+			opp-hz = /bits/ 64 <528000000>;
+			opp-supported-hw = <0x0008>;
+		};
+
+		opp-528000000-1000 {
+			opp-microvolt = <1000000 1000000 1150000>;
+			opp-hz = /bits/ 64 <528000000>;
+			opp-supported-hw = <0x0003>;
+		};
+
+		opp-528000000-1050 {
+			opp-microvolt = <1050000 1050000 1150000>;
+			opp-hz = /bits/ 64 <528000000>;
+			opp-supported-hw = <0x0010>;
+		};
+
+		opp-528000000-1110 {
+			opp-microvolt = <1110000 1110000 1150000>;
+			opp-hz = /bits/ 64 <528000000>;
+			opp-supported-hw = <0x0004>;
+		};
+
+		opp-600000000-950 {
+			opp-microvolt = <950000 950000 1150000>;
+			opp-hz = /bits/ 64 <600000000>;
+			opp-supported-hw = <0x0008>;
+		};
+
+		opp-600000000-1000 {
+			opp-microvolt = <1000000 1000000 1150000>;
+			opp-hz = /bits/ 64 <600000000>;
+			opp-supported-hw = <0x0003>;
+		};
+
+		opp-600000000-1050 {
+			opp-microvolt = <1050000 1050000 1150000>;
+			opp-hz = /bits/ 64 <600000000>;
+			opp-supported-hw = <0x0010>;
+		};
+
+		opp-600000000-1110 {
+			opp-microvolt = <1110000 1110000 1150000>;
+			opp-hz = /bits/ 64 <600000000>;
+			opp-supported-hw = <0x0004>;
+		};
+
+		opp-792000000-1000 {
+			opp-microvolt = <1000000 1000000 1150000>;
+			opp-hz = /bits/ 64 <792000000>;
+			opp-supported-hw = <0x000B>;
+		};
+
+		opp-792000000-1050 {
+			opp-microvolt = <1050000 1050000 1150000>;
+			opp-hz = /bits/ 64 <792000000>;
+			opp-supported-hw = <0x0010>;
+		};
+
+		opp-792000000-1110 {
+			opp-microvolt = <1110000 1110000 1150000>;
+			opp-hz = /bits/ 64 <792000000>;
+			opp-supported-hw = <0x0004>;
+		};
+
+		opp-924000000-1100 {
+			opp-microvolt = <1100000 1100000 1150000>;
+			opp-hz = /bits/ 64 <924000000>;
+			opp-supported-hw = <0x0013>;
+		};
+
+		opp-1200000000-1100 {
+			opp-microvolt = <1100000 1100000 1150000>;
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-supported-hw = <0x0003>;
+		};
+	};
+
+	/* EMC bandwidth OPP table */
+	emc_bw_dfs_opp_table: opp-table-dvfs1 {
+		compatible = "operating-points-v2";
+
+		opp-12750000 {
+			opp-hz = /bits/ 64 <12750000>;
+			opp-supported-hw = <0x001F>;
+			opp-peak-kBps = <204000>;
+		};
+
+		opp-20400000 {
+			opp-hz = /bits/ 64 <20400000>;
+			opp-supported-hw = <0x001F>;
+			opp-peak-kBps = <326400>;
+		};
+
+		opp-40800000 {
+			opp-hz = /bits/ 64 <40800000>;
+			opp-supported-hw = <0x001F>;
+			opp-peak-kBps = <652800>;
+		};
+
+		opp-68000000 {
+			opp-hz = /bits/ 64 <68000000>;
+			opp-supported-hw = <0x001F>;
+			opp-peak-kBps = <1088000>;
+		};
+
+		opp-102000000 {
+			opp-hz = /bits/ 64 <102000000>;
+			opp-supported-hw = <0x001F>;
+			opp-peak-kBps = <1632000>;
+		};
+
+		opp-204000000 {
+			opp-hz = /bits/ 64 <204000000>;
+			opp-supported-hw = <0x001F>;
+			opp-peak-kBps = <3264000>;
+			opp-suspend;
+		};
+
+		opp-264000000 {
+			opp-hz = /bits/ 64 <264000000>;
+			opp-supported-hw = <0x001F>;
+			opp-peak-kBps = <4224000>;
+		};
+
+		opp-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-supported-hw = <0x001F>;
+			opp-peak-kBps = <4800000>;
+		};
+
+		opp-348000000 {
+			opp-hz = /bits/ 64 <348000000>;
+			opp-supported-hw = <0x001F>;
+			opp-peak-kBps = <5568000>;
+		};
+
+		opp-396000000 {
+			opp-hz = /bits/ 64 <396000000>;
+			opp-supported-hw = <0x001F>;
+			opp-peak-kBps = <6336000>;
+		};
+
+		opp-528000000 {
+			opp-hz = /bits/ 64 <528000000>;
+			opp-supported-hw = <0x001F>;
+			opp-peak-kBps = <8448000>;
+		};
+
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-supported-hw = <0x001F>;
+			opp-peak-kBps = <9600000>;
+		};
+
+		opp-792000000 {
+			opp-hz = /bits/ 64 <792000000>;
+			opp-supported-hw = <0x001F>;
+			opp-peak-kBps = <12672000>;
+		};
+
+		opp-924000000 {
+			opp-hz = /bits/ 64 <924000000>;
+			opp-supported-hw = <0x0013>;
+			opp-peak-kBps = <14784000>;
+		};
+
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-supported-hw = <0x0003>;
+			opp-peak-kBps = <19200000>;
+		};
+	};
+};
diff --git a/dts/src/arm64/nvidia/tegra132.dtsi b/dts/src/arm64/nvidia/tegra132.dtsi
index 63aa3129d8..3673f79adf 100644
--- a/dts/src/arm64/nvidia/tegra132.dtsi
+++ b/dts/src/arm64/nvidia/tegra132.dtsi
@@ -8,6 +8,8 @@
 #include <dt-bindings/thermal/tegra124-soctherm.h>
 #include <dt-bindings/soc/tegra-pmc.h>
 
+#include "tegra132-peripherals-opp.dtsi"
+
 / {
 	compatible = "nvidia,tegra132", "nvidia,tegra124";
 	interrupt-parent = <&lic>;
@@ -210,7 +212,7 @@
 	};
 
 	timer@60005000 {
-		compatible = "nvidia,tegra124-timer", "nvidia,tegra20-timer";
+		compatible = "nvidia,tegra124-timer", "nvidia,tegra30-timer";
 		reg = <0x0 0x60005000 0x0 0x400>;
 		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
@@ -244,6 +246,10 @@
 		clock-names = "actmon", "emc";
 		resets = <&tegra_car 119>;
 		reset-names = "actmon";
+		operating-points-v2 = <&emc_bw_dfs_opp_table>;
+		interconnects = <&mc TEGRA124_MC_MPCORER &emc>;
+		interconnect-names = "cpu-read";
+		#cooling-cells = <2>;
 	};
 
 	gpio: gpio@6000d000 {
@@ -394,7 +400,7 @@
 	};
 
 	i2c@7000c000 {
-		compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
+		compatible = "nvidia,tegra124-i2c";
 		reg = <0x0 0x7000c000 0x0 0x100>;
 		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
@@ -409,7 +415,7 @@
 	};
 
 	i2c@7000c400 {
-		compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
+		compatible = "nvidia,tegra124-i2c";
 		reg = <0x0 0x7000c400 0x0 0x100>;
 		interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
@@ -424,7 +430,7 @@
 	};
 
 	i2c@7000c500 {
-		compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
+		compatible = "nvidia,tegra124-i2c";
 		reg = <0x0 0x7000c500 0x0 0x100>;
 		interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
@@ -439,7 +445,7 @@
 	};
 
 	i2c@7000c700 {
-		compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
+		compatible = "nvidia,tegra124-i2c";
 		reg = <0x0 0x7000c700 0x0 0x100>;
 		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
@@ -454,7 +460,7 @@
 	};
 
 	i2c@7000d000 {
-		compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
+		compatible = "nvidia,tegra124-i2c";
 		reg = <0x0 0x7000d000 0x0 0x100>;
 		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
@@ -469,7 +475,7 @@
 	};
 
 	i2c@7000d100 {
-		compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
+		compatible = "nvidia,tegra124-i2c";
 		reg = <0x0 0x7000d100 0x0 0x100>;
 		interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
@@ -607,15 +613,20 @@
 		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
 
 		#iommu-cells = <1>;
+		#reset-cells = <1>;
+		#interconnect-cells = <1>;
 	};
 
 	emc: external-memory-controller@7001b000 {
-		compatible = "nvidia,tegra132-emc";
+		compatible = "nvidia,tegra132-emc", "nvidia,tegra124-emc";
 		reg = <0x0 0x7001b000 0x0 0x1000>;
 		clocks = <&tegra_car TEGRA124_CLK_EMC>;
 		clock-names = "emc";
 
 		nvidia,memory-controller = <&mc>;
+		operating-points-v2 = <&emc_icc_dvfs_opp_table>;
+
+		#interconnect-cells = <0>;
 	};
 
 	sata@70020000 {
@@ -624,10 +635,8 @@
 		      <0x0 0x70020000 0x0 0x7000>; /* SATA */
 		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA124_CLK_SATA>,
-			 <&tegra_car TEGRA124_CLK_SATA_OOB>,
-			 <&tegra_car TEGRA124_CLK_CML1>,
-			 <&tegra_car TEGRA124_CLK_PLL_E>;
-		clock-names = "sata", "sata-oob", "cml1", "pll_e";
+			 <&tegra_car TEGRA124_CLK_SATA_OOB>;
+		clock-names = "sata", "sata-oob";
 		resets = <&tegra_car 124>,
 			 <&tegra_car 129>,
 			 <&tegra_car 123>;
@@ -665,8 +674,8 @@
 			 <&tegra_car TEGRA124_CLK_XUSB_HOST_SRC>,
 			 <&tegra_car TEGRA124_CLK_XUSB_FALCON_SRC>,
 			 <&tegra_car TEGRA124_CLK_XUSB_SS>,
-			 <&tegra_car TEGRA124_CLK_XUSB_SS_SRC>,
 			 <&tegra_car TEGRA124_CLK_XUSB_SS_DIV2>,
+			 <&tegra_car TEGRA124_CLK_XUSB_SS_SRC>,
 			 <&tegra_car TEGRA124_CLK_XUSB_HS_SRC>,
 			 <&tegra_car TEGRA124_CLK_XUSB_FS_SRC>,
 			 <&tegra_car TEGRA124_CLK_PLL_U_480M>,
@@ -674,7 +683,7 @@
 			 <&tegra_car TEGRA124_CLK_PLL_E>;
 		clock-names = "xusb_host", "xusb_host_src",
 			      "xusb_falcon_src", "xusb_ss",
-			      "xusb_ss_src", "xusb_ss_div2",
+			      "xusb_ss_div2", "xusb_ss_src",
 			      "xusb_hs_src", "xusb_fs_src",
 			      "pll_u_480m", "clk_m", "pll_e";
 		resets = <&tegra_car 89>, <&tegra_car 156>,
@@ -886,7 +895,7 @@
 	};
 
 	thermal-zones {
-		cpu {
+		cpu-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <0>;
 
@@ -914,7 +923,8 @@
 				};
 			};
 		};
-		mem {
+
+		mem-thermal {
 			polling-delay-passive = <0>;
 			polling-delay = <0>;
 
@@ -941,7 +951,8 @@
 				 */
 			};
 		};
-		gpu {
+
+		gpu-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <0>;
 
@@ -969,7 +980,8 @@
 				};
 			};
 		};
-		pllx {
+
+		pllx-thermal {
 			polling-delay-passive = <0>;
 			polling-delay = <0>;
 
diff --git a/dts/src/arm64/nvidia/tegra186-p2771-0000.dts b/dts/src/arm64/nvidia/tegra186-p2771-0000.dts
index 52fa258533..c4dee05f33 100644
--- a/dts/src/arm64/nvidia/tegra186-p2771-0000.dts
+++ b/dts/src/arm64/nvidia/tegra186-p2771-0000.dts
@@ -1945,19 +1945,19 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			channel@0 {
+			input@0 {
 				reg = <0x0>;
 				label = "VDD_MUX";
 				shunt-resistor-micro-ohms = <20000>;
 			};
 
-			channel@1 {
+			input@1 {
 				reg = <0x1>;
 				label = "VDD_5V0_IO_SYS";
 				shunt-resistor-micro-ohms = <5000>;
 			};
 
-			channel@2 {
+			input@2 {
 				reg = <0x2>;
 				label = "VDD_3V3_SYS";
 				shunt-resistor-micro-ohms = <10000>;
@@ -1970,19 +1970,19 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			channel@0 {
+			input@0 {
 				reg = <0x0>;
 				label = "VDD_3V3_IO_SLP";
 				shunt-resistor-micro-ohms = <10000>;
 			};
 
-			channel@1 {
+			input@1 {
 				reg = <0x1>;
 				label = "VDD_1V8_IO";
 				shunt-resistor-micro-ohms = <10000>;
 			};
 
-			channel@2 {
+			input@2 {
 				reg = <0x2>;
 				label = "VDD_M2_IN";
 				shunt-resistor-micro-ohms = <10000>;
@@ -2250,7 +2250,7 @@
 		};
 	};
 
-	vdd_sd: regulator@100 {
+	vdd_sd: regulator-vdd-sd {
 		compatible = "regulator-fixed";
 		regulator-name = "SD_CARD_SW_PWR";
 		regulator-min-microvolt = <3300000>;
@@ -2262,7 +2262,7 @@
 		vin-supply = <&vdd_3v3_sys>;
 	};
 
-	vdd_hdmi: regulator@101 {
+	vdd_hdmi: regulator-vdd-hdmi {
 		compatible = "regulator-fixed";
 		regulator-name = "VDD_HDMI_5V0";
 		regulator-min-microvolt = <5000000>;
@@ -2274,7 +2274,7 @@
 		vin-supply = <&vdd_5v0_sys>;
 	};
 
-	vdd_usb0: regulator@102 {
+	vdd_usb0: regulator-vdd-usb0 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDD_USB0";
 		regulator-min-microvolt = <5000000>;
@@ -2286,7 +2286,7 @@
 		vin-supply = <&vdd_5v0_sys>;
 	};
 
-	vdd_usb1: regulator@103 {
+	vdd_usb1: regulator-vdd-usb1 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDD_USB1";
 		regulator-min-microvolt = <5000000>;
diff --git a/dts/src/arm64/nvidia/tegra186-p3310.dtsi b/dts/src/arm64/nvidia/tegra186-p3310.dtsi
index fcd71bfc67..aff857df25 100644
--- a/dts/src/arm64/nvidia/tegra186-p3310.dtsi
+++ b/dts/src/arm64/nvidia/tegra186-p3310.dtsi
@@ -44,7 +44,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			phy: phy@0 {
+			phy: ethernet-phy@0 {
 				compatible = "ethernet-phy-ieee802.3-c22";
 				reg = <0x0>;
 				interrupt-parent = <&gpio>;
@@ -73,19 +73,19 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			channel@0 {
+			input@0 {
 				reg = <0x0>;
 				label = "VDD_SYS_GPU";
 				shunt-resistor-micro-ohms = <10000>;
 			};
 
-			channel@1 {
+			input@1 {
 				reg = <0x1>;
 				label = "VDD_SYS_SOC";
 				shunt-resistor-micro-ohms = <10000>;
 			};
 
-			channel@2 {
+			input@2 {
 				reg = <0x2>;
 				label = "VDD_3V8_WIFI";
 				shunt-resistor-micro-ohms = <10000>;
@@ -98,19 +98,19 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			channel@0 {
+			input@0 {
 				reg = <0x0>;
 				label = "VDD_IN";
 				shunt-resistor-micro-ohms = <5000>;
 			};
 
-			channel@1 {
+			input@1 {
 				reg = <0x1>;
 				label = "VDD_SYS_CPU";
 				shunt-resistor-micro-ohms = <10000>;
 			};
 
-			channel@2 {
+			input@2 {
 				reg = <0x2>;
 				label = "VDD_5V0_DDR";
 				shunt-resistor-micro-ohms = <10000>;
@@ -393,7 +393,7 @@
 		method = "smc";
 	};
 
-	gnd: regulator@0 {
+	gnd: regulator-gnd {
 		compatible = "regulator-fixed";
 		regulator-name = "GND";
 		regulator-min-microvolt = <0>;
@@ -402,7 +402,7 @@
 		regulator-boot-on;
 	};
 
-	vdd_5v0_sys: regulator@1 {
+	vdd_5v0_sys: regulator-vdd-5v0-sys {
 		compatible = "regulator-fixed";
 		regulator-name = "VDD_5V0_SYS";
 		regulator-min-microvolt = <5000000>;
@@ -411,7 +411,7 @@
 		regulator-boot-on;
 	};
 
-	vdd_1v8_ap: regulator@2 {
+	vdd_1v8_ap: regulator-vdd-1v8-ap {
 		compatible = "regulator-fixed";
 		regulator-name = "VDD_1V8_AP";
 		regulator-min-microvolt = <1800000>;
diff --git a/dts/src/arm64/nvidia/tegra186-p3509-0000+p3636-0001.dts b/dts/src/arm64/nvidia/tegra186-p3509-0000+p3636-0001.dts
index af33fe93e1..4631504c3c 100644
--- a/dts/src/arm64/nvidia/tegra186-p3509-0000+p3636-0001.dts
+++ b/dts/src/arm64/nvidia/tegra186-p3509-0000+p3636-0001.dts
@@ -46,7 +46,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			phy: phy@0 {
+			phy: ethernet-phy@0 {
 				compatible = "ethernet-phy-ieee802.3-c22";
 				reg = <0x0>;
 				interrupt-parent = <&gpio_aon>;
@@ -81,22 +81,22 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			channel@0 {
+			input@0 {
 				reg = <0>;
 				label = "VDD_IN";
 				shunt-resistor-micro-ohms = <5>;
 			};
 
-			channel@1 {
+			input@1 {
 				reg = <1>;
 				label = "VDD_CPU_GPU";
 				shunt-resistor-micro-ohms = <5>;
 			};
 
-			channel@2 {
+			input@2 {
 				reg = <2>;
 				label = "VDD_SOC";
-				shunt-resistor-micro-ohms = <>;
+				shunt-resistor-micro-ohms = <5>;
 			};
 		};
 	};
@@ -593,7 +593,7 @@
 		method = "smc";
 	};
 
-	gnd: regulator@0 {
+	gnd: regulator-gnd {
 		compatible = "regulator-fixed";
 		regulator-name = "GND";
 		regulator-min-microvolt = <0>;
@@ -602,7 +602,7 @@
 		regulator-boot-on;
 	};
 
-	vdd_5v0_sys: regulator@1 {
+	vdd_5v0_sys: regulator-vdd-5v0-sys {
 		compatible = "regulator-fixed";
 		regulator-name = "VDD_5V0_SYS";
 		regulator-min-microvolt = <5000000>;
@@ -611,7 +611,7 @@
 		regulator-boot-on;
 	};
 
-	vdd_1v8_ap: regulator@2 {
+	vdd_1v8_ap: regulator-vdd-1v8-ap {
 		compatible = "regulator-fixed";
 		regulator-name = "VDD_1V8_AP";
 		regulator-min-microvolt = <1800000>;
@@ -623,7 +623,7 @@
 		vin-supply = <&vdd_1v8>;
 	};
 
-	vdd_hdmi: regulator@3 {
+	vdd_hdmi: regulator-vdd-hdmi {
 		compatible = "regulator-fixed";
 		regulator-name = "VDD_5V0_HDMI_CON";
 		regulator-min-microvolt = <5000000>;
@@ -633,7 +633,7 @@
 	};
 
 	thermal-zones {
-		cpu {
+		cpu-thermal {
 			polling-delay = <0>;
 			polling-delay-passive = <500>;
 			status = "okay";
@@ -687,28 +687,28 @@
 			};
 		};
 
-		gpu {
+		aux-thermal {
 			polling-delay = <0>;
 			polling-delay-passive = <500>;
 			status = "okay";
 
 			trips {
-				gpu_alert0: critical {
-					temperature = <99000>;
+				aux_alert0: critical {
+					temperature = <90000>;
 					hysteresis = <0>;
 					type = "critical";
 				};
 			};
 		};
 
-		aux {
+		gpu-thermal {
 			polling-delay = <0>;
 			polling-delay-passive = <500>;
 			status = "okay";
 
 			trips {
-				aux_alert0: critical {
-					temperature = <90000>;
+				gpu_alert0: critical {
+					temperature = <99000>;
 					hysteresis = <0>;
 					type = "critical";
 				};
diff --git a/dts/src/arm64/nvidia/tegra186.dtsi b/dts/src/arm64/nvidia/tegra186.dtsi
index 9ac4f01407..c91afff1b7 100644
--- a/dts/src/arm64/nvidia/tegra186.dtsi
+++ b/dts/src/arm64/nvidia/tegra186.dtsi
@@ -508,6 +508,22 @@
 		};
 	};
 
+	timer@3010000 {
+		compatible = "nvidia,tegra186-timer";
+		reg = <0x0 0x03010000 0x0 0x000e0000>;
+		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
 	uarta: serial@3100000 {
 		compatible = "nvidia,tegra186-uart", "nvidia,tegra20-uart";
 		reg = <0x0 0x03100000 0x0 0x40>;
@@ -569,7 +585,7 @@
 	};
 
 	gen1_i2c: i2c@3160000 {
-		compatible = "nvidia,tegra186-i2c", "nvidia,tegra210-i2c";
+		compatible = "nvidia,tegra186-i2c";
 		reg = <0x0 0x03160000 0x0 0x10000>;
 		interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
@@ -582,7 +598,7 @@
 	};
 
 	cam_i2c: i2c@3180000 {
-		compatible = "nvidia,tegra186-i2c", "nvidia,tegra210-i2c";
+		compatible = "nvidia,tegra186-i2c";
 		reg = <0x0 0x03180000 0x0 0x10000>;
 		interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
@@ -596,7 +612,7 @@
 
 	/* shares pads with dpaux1 */
 	dp_aux_ch1_i2c: i2c@3190000 {
-		compatible = "nvidia,tegra186-i2c", "nvidia,tegra210-i2c";
+		compatible = "nvidia,tegra186-i2c";
 		reg = <0x0 0x03190000 0x0 0x10000>;
 		interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
@@ -613,7 +629,7 @@
 
 	/* controlled by BPMP, should not be enabled */
 	pwr_i2c: i2c@31a0000 {
-		compatible = "nvidia,tegra186-i2c", "nvidia,tegra210-i2c";
+		compatible = "nvidia,tegra186-i2c";
 		reg = <0x0 0x031a0000 0x0 0x10000>;
 		interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
@@ -627,7 +643,7 @@
 
 	/* shares pads with dpaux0 */
 	dp_aux_ch0_i2c: i2c@31b0000 {
-		compatible = "nvidia,tegra186-i2c", "nvidia,tegra210-i2c";
+		compatible = "nvidia,tegra186-i2c";
 		reg = <0x0 0x031b0000 0x0 0x10000>;
 		interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
@@ -643,7 +659,7 @@
 	};
 
 	gen7_i2c: i2c@31c0000 {
-		compatible = "nvidia,tegra186-i2c", "nvidia,tegra210-i2c";
+		compatible = "nvidia,tegra186-i2c";
 		reg = <0x0 0x031c0000 0x0 0x10000>;
 		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
@@ -656,7 +672,7 @@
 	};
 
 	gen9_i2c: i2c@31e0000 {
-		compatible = "nvidia,tegra186-i2c", "nvidia,tegra210-i2c";
+		compatible = "nvidia,tegra186-i2c";
 		reg = <0x0 0x031e0000 0x0 0x10000>;
 		interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
@@ -1073,7 +1089,7 @@
 	};
 
 	gen2_i2c: i2c@c240000 {
-		compatible = "nvidia,tegra186-i2c", "nvidia,tegra210-i2c";
+		compatible = "nvidia,tegra186-i2c";
 		reg = <0x0 0x0c240000 0x0 0x10000>;
 		interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
@@ -1086,7 +1102,7 @@
 	};
 
 	gen8_i2c: i2c@c250000 {
-		compatible = "nvidia,tegra186-i2c", "nvidia,tegra210-i2c";
+		compatible = "nvidia,tegra186-i2c";
 		reg = <0x0 0x0c250000 0x0 0x10000>;
 		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
@@ -1199,7 +1215,7 @@
 
 	ccplex@e000000 {
 		compatible = "nvidia,tegra186-ccplex-cluster";
-		reg = <0x0 0x0e000000 0x0 0x3fffff>;
+		reg = <0x0 0x0e000000 0x0 0x400000>;
 
 		nvidia,bpmp = <&bpmp>;
 	};
@@ -1538,6 +1554,21 @@
 			iommus = <&smmu TEGRA186_SID_VIC>;
 		};
 
+		nvjpg@15380000 {
+			compatible = "nvidia,tegra186-nvjpg";
+			reg = <0x15380000 0x40000>;
+			clocks = <&bpmp TEGRA186_CLK_NVJPG>;
+			clock-names = "nvjpg";
+			resets = <&bpmp TEGRA186_RESET_NVJPG>;
+			reset-names = "nvjpg";
+
+			power-domains = <&bpmp TEGRA186_POWER_DOMAIN_NVJPG>;
+			interconnects = <&mc TEGRA186_MEMORY_CLIENT_NVJPGSRD &emc>,
+					<&mc TEGRA186_MEMORY_CLIENT_NVJPGSWR &emc>;
+			interconnect-names = "dma-mem", "write";
+			iommus = <&smmu TEGRA186_SID_NVJPG>;
+		};
+
 		dsib: dsi@15400000 {
 			compatible = "nvidia,tegra186-dsi";
 			reg = <0x15400000 0x10000>;
@@ -1569,6 +1600,21 @@
 			iommus = <&smmu TEGRA186_SID_NVDEC>;
 		};
 
+		nvenc@154c0000 {
+			compatible = "nvidia,tegra186-nvenc";
+			reg = <0x154c0000 0x40000>;
+			clocks = <&bpmp TEGRA186_CLK_NVENC>;
+			clock-names = "nvenc";
+			resets = <&bpmp TEGRA186_RESET_NVENC>;
+			reset-names = "nvenc";
+
+			power-domains = <&bpmp TEGRA186_POWER_DOMAIN_MPE>;
+			interconnects = <&mc TEGRA186_MEMORY_CLIENT_NVENCSRD &emc>,
+					<&mc TEGRA186_MEMORY_CLIENT_NVENCSWR &emc>;
+			interconnect-names = "dma-mem", "write";
+			iommus = <&smmu TEGRA186_SID_NVENC>;
+		};
+
 		sor0: sor@15540000 {
 			compatible = "nvidia,tegra186-sor";
 			reg = <0x15540000 0x10000>;
@@ -1771,7 +1817,7 @@
 		iommus = <&smmu TEGRA186_SID_BPMP>;
 		mboxes = <&hsp_top0 TEGRA_HSP_MBOX_TYPE_DB
 				    TEGRA_HSP_DB_MASTER_BPMP>;
-		shmem = <&cpu_bpmp_tx &cpu_bpmp_rx>;
+		shmem = <&cpu_bpmp_tx>, <&cpu_bpmp_rx>;
 		#clock-cells = <1>;
 		#reset-cells = <1>;
 		#power-domain-cells = <1>;
@@ -1930,12 +1976,12 @@
 	};
 
 	thermal-zones {
-		a57 {
+		/* Cortex-A57 cluster */
+		cpu-thermal {
 			polling-delay = <0>;
 			polling-delay-passive = <1000>;
 
-			thermal-sensors =
-				<&bpmp_thermal TEGRA186_BPMP_THERMAL_ZONE_CPU>;
+			thermal-sensors = <&bpmp_thermal TEGRA186_BPMP_THERMAL_ZONE_CPU>;
 
 			trips {
 				critical {
@@ -1949,12 +1995,12 @@
 			};
 		};
 
-		denver {
+		/* Denver cluster */
+		aux-thermal {
 			polling-delay = <0>;
 			polling-delay-passive = <1000>;
 
-			thermal-sensors =
-				<&bpmp_thermal TEGRA186_BPMP_THERMAL_ZONE_AUX>;
+			thermal-sensors = <&bpmp_thermal TEGRA186_BPMP_THERMAL_ZONE_AUX>;
 
 			trips {
 				critical {
@@ -1968,12 +2014,11 @@
 			};
 		};
 
-		gpu {
+		gpu-thermal {
 			polling-delay = <0>;
 			polling-delay-passive = <1000>;
 
-			thermal-sensors =
-				<&bpmp_thermal TEGRA186_BPMP_THERMAL_ZONE_GPU>;
+			thermal-sensors = <&bpmp_thermal TEGRA186_BPMP_THERMAL_ZONE_GPU>;
 
 			trips {
 				critical {
@@ -1987,12 +2032,11 @@
 			};
 		};
 
-		pll {
+		pll-thermal {
 			polling-delay = <0>;
 			polling-delay-passive = <1000>;
 
-			thermal-sensors =
-				<&bpmp_thermal TEGRA186_BPMP_THERMAL_ZONE_PLLX>;
+			thermal-sensors = <&bpmp_thermal TEGRA186_BPMP_THERMAL_ZONE_PLLX>;
 
 			trips {
 				critical {
@@ -2006,12 +2050,11 @@
 			};
 		};
 
-		always_on {
+		ao-thermal {
 			polling-delay = <0>;
 			polling-delay-passive = <1000>;
 
-			thermal-sensors =
-				<&bpmp_thermal TEGRA186_BPMP_THERMAL_ZONE_AO>;
+			thermal-sensors = <&bpmp_thermal TEGRA186_BPMP_THERMAL_ZONE_AO>;
 
 			trips {
 				critical {
diff --git a/dts/src/arm64/nvidia/tegra194-p2888.dtsi b/dts/src/arm64/nvidia/tegra194-p2888.dtsi
index c4058ee36f..a7d7cfd663 100644
--- a/dts/src/arm64/nvidia/tegra194-p2888.dtsi
+++ b/dts/src/arm64/nvidia/tegra194-p2888.dtsi
@@ -39,7 +39,7 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 
-				phy: phy@0 {
+				phy: ethernet-phy@0 {
 					compatible = "ethernet-phy-ieee802.3-c22";
 					reg = <0x0>;
 					interrupt-parent = <&gpio>;
@@ -317,7 +317,7 @@
 		};
 	};
 
-	vdd_5v0_sys: regulator@0 {
+	vdd_5v0_sys: regulator-vdd-5v0-sys {
 		compatible = "regulator-fixed";
 		regulator-name = "VIN_SYS_5V0";
 		regulator-min-microvolt = <5000000>;
@@ -326,7 +326,7 @@
 		regulator-boot-on;
 	};
 
-	vdd_hdmi: regulator@1 {
+	vdd_hdmi: regulator-vdd-hdmi {
 		compatible = "regulator-fixed";
 		regulator-name = "VDD_5V0_HDMI_CON";
 		regulator-min-microvolt = <5000000>;
@@ -335,7 +335,7 @@
 		enable-active-high;
 	};
 
-	vdd_3v3_pcie: regulator@2 {
+	vdd_3v3_pcie: regulator-vdd-3v3-pcie {
 		compatible = "regulator-fixed";
 		regulator-name = "PEX_3V3";
 		regulator-min-microvolt = <3300000>;
@@ -345,7 +345,7 @@
 		enable-active-high;
 	};
 
-	vdd_12v_pcie: regulator@3 {
+	vdd_12v_pcie: regulator-vdd-12v-pcie {
 		compatible = "regulator-fixed";
 		regulator-name = "VDD_12V";
 		regulator-min-microvolt = <1200000>;
@@ -354,7 +354,7 @@
 		regulator-boot-on;
 	};
 
-	vdd_5v_sata: regulator@4 {
+	vdd_5v_sata: regulator-vdd-5v0-sata {
 		compatible = "regulator-fixed";
 		regulator-name = "VDD_5V_SATA";
 		regulator-min-microvolt = <5000000>;
diff --git a/dts/src/arm64/nvidia/tegra194-p2972-0000.dts b/dts/src/arm64/nvidia/tegra194-p2972-0000.dts
index 9f34871b8f..2478ece9e6 100644
--- a/dts/src/arm64/nvidia/tegra194-p2972-0000.dts
+++ b/dts/src/arm64/nvidia/tegra194-p2972-0000.dts
@@ -1031,7 +1031,7 @@
 						i2s6_port: port@1 {
 							reg = <1>;
 
-							i2s6_dap_ep: endpoint@0 {
+							i2s6_dap_ep: endpoint {
 								dai-format = "i2s";
 								/* Place holder for external Codec */
 							};
@@ -2097,7 +2097,7 @@
 	};
 
 	thermal-zones {
-		cpu {
+		cpu-thermal {
 			polling-delay = <0>;
 			polling-delay-passive = <500>;
 			status = "okay";
@@ -2151,7 +2151,7 @@
 			};
 		};
 
-		gpu {
+		gpu-thermal {
 			polling-delay = <0>;
 			polling-delay-passive = <500>;
 			status = "okay";
@@ -2165,7 +2165,7 @@
 			};
 		};
 
-		aux {
+		aux-thermal {
 			polling-delay = <0>;
 			polling-delay-passive = <500>;
 			status = "okay";
diff --git a/dts/src/arm64/nvidia/tegra194-p3509-0000.dtsi b/dts/src/arm64/nvidia/tegra194-p3509-0000.dtsi
index a055f17218..1323fa9b83 100644
--- a/dts/src/arm64/nvidia/tegra194-p3509-0000.dtsi
+++ b/dts/src/arm64/nvidia/tegra194-p3509-0000.dtsi
@@ -989,7 +989,7 @@
 						i2s5_port: port@1 {
 							reg = <1>;
 
-							i2s5_dap_ep: endpoint@0 {
+							i2s5_dap_ep: endpoint {
 								dai-format = "i2s";
 								/* Place holder for external Codec */
 							};
@@ -1878,7 +1878,7 @@
 			status = "okay";
 
 			flash@0 {
-				compatible = "spi-nor";
+				compatible = "jedec,spi-nor";
 				reg = <0>;
 				spi-max-frequency = <102000000>;
 				spi-tx-bus-width = <4>;
@@ -2000,7 +2000,7 @@
 		};
 	};
 
-	vdd_5v0_sys: regulator@100 {
+	vdd_5v0_sys: regulator-vdd-5v0-sys {
 		compatible = "regulator-fixed";
 		regulator-name = "VDD_5V_SYS";
 		regulator-min-microvolt = <5000000>;
@@ -2009,7 +2009,7 @@
 		regulator-boot-on;
 	};
 
-	vdd_3v3_sys: regulator@101 {
+	vdd_3v3_sys: regulator-vdd-3v3-sys {
 		compatible = "regulator-fixed";
 		regulator-name = "VDD_3V3_SYS";
 		regulator-min-microvolt = <3300000>;
@@ -2018,7 +2018,7 @@
 		regulator-boot-on;
 	};
 
-	vdd_3v3_ao: regulator@102 {
+	vdd_3v3_ao: regulator-vdd-3v3-ao {
 		compatible = "regulator-fixed";
 		regulator-name = "VDD_3V3_AO";
 		regulator-min-microvolt = <3300000>;
@@ -2027,7 +2027,7 @@
 		regulator-boot-on;
 	};
 
-	vdd_1v8: regulator@103 {
+	vdd_1v8: regulator-vdd-1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDD_1V8";
 		regulator-min-microvolt = <1800000>;
@@ -2036,7 +2036,7 @@
 		regulator-boot-on;
 	};
 
-	vdd_hdmi: regulator@104 {
+	vdd_hdmi: regulator-vdd-hdmi {
 		compatible = "regulator-fixed";
 		regulator-name = "VDD_5V0_HDMI_CON";
 		regulator-min-microvolt = <5000000>;
@@ -2103,7 +2103,7 @@
 	};
 
 	thermal-zones {
-		cpu {
+		cpu-thermal {
 			polling-delay = <0>;
 			polling-delay-passive = <500>;
 			status = "okay";
@@ -2157,7 +2157,7 @@
 			};
 		};
 
-		gpu {
+		gpu-thermal {
 			polling-delay = <0>;
 			polling-delay-passive = <500>;
 			status = "okay";
@@ -2171,7 +2171,7 @@
 			};
 		};
 
-		aux {
+		aux-thermal {
 			polling-delay = <0>;
 			polling-delay-passive = <500>;
 			status = "okay";
diff --git a/dts/src/arm64/nvidia/tegra194-p3668-0000.dtsi b/dts/src/arm64/nvidia/tegra194-p3668-0000.dtsi
index 14da4206ea..8c2c709dd5 100644
--- a/dts/src/arm64/nvidia/tegra194-p3668-0000.dtsi
+++ b/dts/src/arm64/nvidia/tegra194-p3668-0000.dtsi
@@ -20,7 +20,7 @@
 		};
 	};
 
-	vdd_3v3_sd: regulator@0 {
+	vdd_3v3_sd: regulator-vdd-3v3-sd {
 		compatible = "regulator-fixed";
 		regulator-name = "VDD_3V3_SD";
 		regulator-min-microvolt = <3300000>;
diff --git a/dts/src/arm64/nvidia/tegra194-p3668.dtsi b/dts/src/arm64/nvidia/tegra194-p3668.dtsi
index f16b0aa8a3..0bd66f9c62 100644
--- a/dts/src/arm64/nvidia/tegra194-p3668.dtsi
+++ b/dts/src/arm64/nvidia/tegra194-p3668.dtsi
@@ -36,7 +36,7 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 
-				phy: phy@0 {
+				phy: ethernet-phy@0 {
 					compatible = "ethernet-phy-ieee802.3-c22";
 					reg = <0x0>;
 					interrupt-parent = <&gpio>;
diff --git a/dts/src/arm64/nvidia/tegra194.dtsi b/dts/src/arm64/nvidia/tegra194.dtsi
index 851e049b35..2d48c3715f 100644
--- a/dts/src/arm64/nvidia/tegra194.dtsi
+++ b/dts/src/arm64/nvidia/tegra194.dtsi
@@ -3,6 +3,7 @@
 #include <dt-bindings/gpio/tegra194-gpio.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/mailbox/tegra186-hsp.h>
+#include <dt-bindings/pinctrl/pinctrl-tegra-io-pad.h>
 #include <dt-bindings/pinctrl/pinctrl-tegra.h>
 #include <dt-bindings/power/tegra194-powergate.h>
 #include <dt-bindings/reset/tegra194-reset.h>
@@ -535,7 +536,6 @@
 				pex_rst {
 					nvidia,pins = "pex_l5_rst_n_pgg1";
 					nvidia,schmitt = <TEGRA_PIN_DISABLE>;
-					nvidia,lpdr = <TEGRA_PIN_ENABLE>;
 					nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 					nvidia,io-hv = <TEGRA_PIN_ENABLE>;
 					nvidia,tristate = <TEGRA_PIN_DISABLE>;
@@ -547,7 +547,6 @@
 				clkreq {
 					nvidia,pins = "pex_l5_clkreq_n_pgg0";
 					nvidia,schmitt = <TEGRA_PIN_DISABLE>;
-					nvidia,lpdr = <TEGRA_PIN_ENABLE>;
 					nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 					nvidia,io-hv = <TEGRA_PIN_ENABLE>;
 					nvidia,tristate = <TEGRA_PIN_DISABLE>;
@@ -593,6 +592,7 @@
 				compatible = "nvidia,tegra194-emc";
 				reg = <0x0 0x02c60000 0x0 0x90000>,
 				      <0x0 0x01780000 0x0 0x80000>;
+				interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&bpmp TEGRA194_CLK_EMC>;
 				clock-names = "emc";
 
@@ -893,6 +893,9 @@
 					<&mc TEGRA194_MEMORY_CLIENT_SDMMCWA &emc>;
 			interconnect-names = "dma-mem", "write";
 			iommus = <&smmu TEGRA194_SID_SDMMC1>;
+			pinctrl-names = "sdmmc-3v3", "sdmmc-1v8";
+			pinctrl-0 = <&sdmmc1_3v3>;
+			pinctrl-1 = <&sdmmc1_1v8>;
 			nvidia,pad-autocal-pull-up-offset-3v3-timeout =
 									<0x07>;
 			nvidia,pad-autocal-pull-down-offset-3v3-timeout =
@@ -904,6 +907,10 @@
 			nvidia,pad-autocal-pull-down-offset-sdr104 = <0x00>;
 			nvidia,default-tap = <0x9>;
 			nvidia,default-trim = <0x5>;
+			sd-uhs-sdr25;
+			sd-uhs-sdr50;
+			sd-uhs-ddr50;
+			sd-uhs-sdr104;
 			status = "disabled";
 		};
 
@@ -920,6 +927,9 @@
 					<&mc TEGRA194_MEMORY_CLIENT_SDMMCW &emc>;
 			interconnect-names = "dma-mem", "write";
 			iommus = <&smmu TEGRA194_SID_SDMMC3>;
+			pinctrl-names = "sdmmc-3v3", "sdmmc-1v8";
+			pinctrl-0 = <&sdmmc3_3v3>;
+			pinctrl-1 = <&sdmmc3_1v8>;
 			nvidia,pad-autocal-pull-up-offset-1v8 = <0x00>;
 			nvidia,pad-autocal-pull-down-offset-1v8 = <0x7a>;
 			nvidia,pad-autocal-pull-up-offset-3v3-timeout = <0x07>;
@@ -932,6 +942,10 @@
 			nvidia,pad-autocal-pull-down-offset-sdr104 = <0x00>;
 			nvidia,default-tap = <0x9>;
 			nvidia,default-trim = <0x5>;
+			sd-uhs-sdr25;
+			sd-uhs-sdr50;
+			sd-uhs-ddr50;
+			sd-uhs-sdr104;
 			status = "disabled";
 		};
 
@@ -963,6 +977,11 @@
 			nvidia,default-tap = <0x8>;
 			nvidia,default-trim = <0x14>;
 			nvidia,dqs-trim = <40>;
+			cap-mmc-highspeed;
+			mmc-ddr-1_8v;
+			mmc-hs200-1_8v;
+			mmc-hs400-1_8v;
+			mmc-hs400-enhanced-strobe;
 			supports-cqe;
 			status = "disabled";
 		};
@@ -976,9 +995,8 @@
 				 <&bpmp TEGRA194_CLK_HDA2CODEC_2X>;
 			clock-names = "hda", "hda2hdmi", "hda2codec_2x";
 			resets = <&bpmp TEGRA194_RESET_HDA>,
-				 <&bpmp TEGRA194_RESET_HDA2HDMICODEC>,
-				 <&bpmp TEGRA194_RESET_HDA2CODEC_2X>;
-			reset-names = "hda", "hda2hdmi", "hda2codec_2x";
+				 <&bpmp TEGRA194_RESET_HDA2HDMICODEC>;
+			reset-names = "hda", "hda2hdmi";
 			power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISP>;
 			interconnects = <&mc TEGRA194_MEMORY_CLIENT_HDAR &emc>,
 					<&mc TEGRA194_MEMORY_CLIENT_HDAW &emc>;
@@ -1182,7 +1200,7 @@
 		};
 
 		hsp_top0: hsp@3c00000 {
-			compatible = "nvidia,tegra194-hsp", "nvidia,tegra186-hsp";
+			compatible = "nvidia,tegra194-hsp";
 			reg = <0x03c00000 0xa0000>;
 			interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>,
 			             <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
@@ -1360,7 +1378,7 @@
 		};
 
 		hsp_aon: hsp@c150000 {
-			compatible = "nvidia,tegra194-hsp", "nvidia,tegra186-hsp";
+			compatible = "nvidia,tegra194-hsp";
 			reg = <0x0c150000 0x90000>;
 			interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
 			             <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
@@ -1472,6 +1490,101 @@
 
 			#interrupt-cells = <2>;
 			interrupt-controller;
+			sdmmc1_3v3: sdmmc1-3v3 {
+				pins = "sdmmc1-hv";
+				power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>;
+			};
+
+			sdmmc1_1v8: sdmmc1-1v8 {
+				pins = "sdmmc1-hv";
+				power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>;
+			};
+			sdmmc3_3v3: sdmmc3-3v3 {
+				pins = "sdmmc3-hv";
+				power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>;
+			};
+
+			sdmmc3_1v8: sdmmc3-1v8 {
+				pins = "sdmmc3-hv";
+				power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>;
+			};
+
+		};
+
+		iommu@10000000 {
+			compatible = "nvidia,tegra194-smmu", "nvidia,smmu-500";
+			reg = <0x10000000 0x800000>;
+			interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
+			stream-match-mask = <0x7f80>;
+			#global-interrupts = <1>;
+			#iommu-cells = <1>;
+
+			nvidia,memory-controller = <&mc>;
+			status = "okay";
 		};
 
 		smmu: iommu@12000000 {
@@ -1703,6 +1816,23 @@
 						<&mc TEGRA194_MEMORY_CLIENT_VICSWR &emc>;
 				interconnect-names = "dma-mem", "write";
 				iommus = <&smmu TEGRA194_SID_VIC>;
+				dma-coherent;
+			};
+
+			nvjpg@15380000 {
+				compatible = "nvidia,tegra194-nvjpg";
+				reg = <0x15380000 0x40000>;
+				clocks = <&bpmp TEGRA194_CLK_NVJPG>;
+				clock-names = "nvjpg";
+				resets = <&bpmp TEGRA194_RESET_NVJPG>;
+				reset-names = "nvjpg";
+
+				power-domains = <&bpmp TEGRA194_POWER_DOMAIN_NVJPG>;
+				interconnects = <&mc TEGRA194_MEMORY_CLIENT_NVJPGSRD &emc>,
+						<&mc TEGRA194_MEMORY_CLIENT_NVJPGSWR &emc>;
+				interconnect-names = "dma-mem", "write";
+				iommus = <&smmu TEGRA194_SID_NVJPG>;
+				dma-coherent;
 			};
 
 			nvdec@15480000 {
@@ -1724,6 +1854,25 @@
 				nvidia,host1x-class = <0xf0>;
 			};
 
+			nvenc@154c0000 {
+				compatible = "nvidia,tegra194-nvenc";
+				reg = <0x154c0000 0x40000>;
+				clocks = <&bpmp TEGRA194_CLK_NVENC>;
+				clock-names = "nvenc";
+				resets = <&bpmp TEGRA194_RESET_NVENC>;
+				reset-names = "nvenc";
+
+				power-domains = <&bpmp TEGRA194_POWER_DOMAIN_NVENCA>;
+				interconnects = <&mc TEGRA194_MEMORY_CLIENT_NVENCSRD &emc>,
+						<&mc TEGRA194_MEMORY_CLIENT_NVENCSRD1 &emc>,
+						<&mc TEGRA194_MEMORY_CLIENT_NVENCSWR &emc>;
+				interconnect-names = "dma-mem", "read-1", "write";
+				iommus = <&smmu TEGRA194_SID_NVENC>;
+				dma-coherent;
+
+				nvidia,host1x-class = <0x21>;
+			};
+
 			dpaux0: dpaux@155c0000 {
 				compatible = "nvidia,tegra194-dpaux";
 				reg = <0x155c0000 0x10000>;
@@ -1860,6 +2009,25 @@
 				};
 			};
 
+			nvenc@15a80000 {
+				compatible = "nvidia,tegra194-nvenc";
+				reg = <0x15a80000 0x00040000>;
+				clocks = <&bpmp TEGRA194_CLK_NVENC1>;
+				clock-names = "nvenc";
+				resets = <&bpmp TEGRA194_RESET_NVENC1>;
+				reset-names = "nvenc";
+
+				power-domains = <&bpmp TEGRA194_POWER_DOMAIN_NVENCB>;
+				interconnects = <&mc TEGRA194_MEMORY_CLIENT_NVENC1SRD &emc>,
+						<&mc TEGRA194_MEMORY_CLIENT_NVENC1SRD1 &emc>,
+						<&mc TEGRA194_MEMORY_CLIENT_NVENC1SWR &emc>;
+				interconnect-names = "dma-mem", "read-1", "write";
+				iommus = <&smmu TEGRA194_SID_NVENC1>;
+				dma-coherent;
+
+				nvidia,host1x-class = <0x22>;
+			};
+
 			sor0: sor@15b00000 {
 				compatible = "nvidia,tegra194-sor";
 				reg = <0x15b00000 0x40000>;
@@ -2007,7 +2175,6 @@
 		#size-cells = <2>;
 		device_type = "pci";
 		num-lanes = <1>;
-		num-viewport = <8>;
 		linux,pci-domain = <1>;
 
 		clocks = <&bpmp TEGRA194_CLK_PEX0_CORE_1>;
@@ -2040,7 +2207,6 @@
 		interconnects = <&mc TEGRA194_MEMORY_CLIENT_PCIE1R &emc>,
 				<&mc TEGRA194_MEMORY_CLIENT_PCIE1W &emc>;
 		interconnect-names = "dma-mem", "write";
-		iommus = <&smmu TEGRA194_SID_PCIE1>;
 		iommu-map = <0x0 &smmu TEGRA194_SID_PCIE1 0x1000>;
 		iommu-map-mask = <0x0>;
 		dma-coherent;
@@ -2061,7 +2227,6 @@
 		#size-cells = <2>;
 		device_type = "pci";
 		num-lanes = <1>;
-		num-viewport = <8>;
 		linux,pci-domain = <2>;
 
 		clocks = <&bpmp TEGRA194_CLK_PEX0_CORE_2>;
@@ -2094,7 +2259,6 @@
 		interconnects = <&mc TEGRA194_MEMORY_CLIENT_PCIE2AR &emc>,
 				<&mc TEGRA194_MEMORY_CLIENT_PCIE2AW &emc>;
 		interconnect-names = "dma-mem", "write";
-		iommus = <&smmu TEGRA194_SID_PCIE2>;
 		iommu-map = <0x0 &smmu TEGRA194_SID_PCIE2 0x1000>;
 		iommu-map-mask = <0x0>;
 		dma-coherent;
@@ -2115,7 +2279,6 @@
 		#size-cells = <2>;
 		device_type = "pci";
 		num-lanes = <1>;
-		num-viewport = <8>;
 		linux,pci-domain = <3>;
 
 		clocks = <&bpmp TEGRA194_CLK_PEX0_CORE_3>;
@@ -2148,7 +2311,6 @@
 		interconnects = <&mc TEGRA194_MEMORY_CLIENT_PCIE3R &emc>,
 				<&mc TEGRA194_MEMORY_CLIENT_PCIE3W &emc>;
 		interconnect-names = "dma-mem", "write";
-		iommus = <&smmu TEGRA194_SID_PCIE3>;
 		iommu-map = <0x0 &smmu TEGRA194_SID_PCIE3 0x1000>;
 		iommu-map-mask = <0x0>;
 		dma-coherent;
@@ -2169,7 +2331,6 @@
 		#size-cells = <2>;
 		device_type = "pci";
 		num-lanes = <4>;
-		num-viewport = <8>;
 		linux,pci-domain = <4>;
 
 		clocks = <&bpmp TEGRA194_CLK_PEX0_CORE_4>;
@@ -2202,7 +2363,6 @@
 		interconnects = <&mc TEGRA194_MEMORY_CLIENT_PCIE4R &emc>,
 				<&mc TEGRA194_MEMORY_CLIENT_PCIE4W &emc>;
 		interconnect-names = "dma-mem", "write";
-		iommus = <&smmu TEGRA194_SID_PCIE4>;
 		iommu-map = <0x0 &smmu TEGRA194_SID_PCIE4 0x1000>;
 		iommu-map-mask = <0x0>;
 		dma-coherent;
@@ -2223,7 +2383,6 @@
 		#size-cells = <2>;
 		device_type = "pci";
 		num-lanes = <8>;
-		num-viewport = <8>;
 		linux,pci-domain = <0>;
 
 		clocks = <&bpmp TEGRA194_CLK_PEX0_CORE_0>;
@@ -2256,7 +2415,6 @@
 		interconnects = <&mc TEGRA194_MEMORY_CLIENT_PCIE0R &emc>,
 				<&mc TEGRA194_MEMORY_CLIENT_PCIE0W &emc>;
 		interconnect-names = "dma-mem", "write";
-		iommus = <&smmu TEGRA194_SID_PCIE0>;
 		iommu-map = <0x0 &smmu TEGRA194_SID_PCIE0 0x1000>;
 		iommu-map-mask = <0x0>;
 		dma-coherent;
@@ -2277,15 +2435,13 @@
 		#size-cells = <2>;
 		device_type = "pci";
 		num-lanes = <8>;
-		num-viewport = <8>;
 		linux,pci-domain = <5>;
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&pex_rst_c5_out_state>, <&clkreq_c5_bi_dir_state>;
 
-		clocks = <&bpmp TEGRA194_CLK_PEX1_CORE_5>,
-			 <&bpmp TEGRA194_CLK_PEX1_CORE_5M>;
-		clock-names = "core", "core_m";
+		clocks = <&bpmp TEGRA194_CLK_PEX1_CORE_5>;
+		clock-names = "core";
 
 		resets = <&bpmp TEGRA194_RESET_PEX1_CORE_5_APB>,
 			 <&bpmp TEGRA194_RESET_PEX1_CORE_5>;
@@ -2314,7 +2470,6 @@
 		interconnects = <&mc TEGRA194_MEMORY_CLIENT_PCIE5R &emc>,
 				<&mc TEGRA194_MEMORY_CLIENT_PCIE5W &emc>;
 		interconnect-names = "dma-mem", "write";
-		iommus = <&smmu TEGRA194_SID_PCIE5>;
 		iommu-map = <0x0 &smmu TEGRA194_SID_PCIE5 0x1000>;
 		iommu-map-mask = <0x0>;
 		dma-coherent;
@@ -2354,7 +2509,6 @@
 		interconnects = <&mc TEGRA194_MEMORY_CLIENT_PCIE4R &emc>,
 				<&mc TEGRA194_MEMORY_CLIENT_PCIE4W &emc>;
 		interconnect-names = "dma-mem", "write";
-		iommus = <&smmu TEGRA194_SID_PCIE4>;
 		iommu-map = <0x0 &smmu TEGRA194_SID_PCIE4 0x1000>;
 		iommu-map-mask = <0x0>;
 		dma-coherent;
@@ -2394,7 +2548,6 @@
 		interconnects = <&mc TEGRA194_MEMORY_CLIENT_PCIE0R &emc>,
 				<&mc TEGRA194_MEMORY_CLIENT_PCIE0W &emc>;
 		interconnect-names = "dma-mem", "write";
-		iommus = <&smmu TEGRA194_SID_PCIE0>;
 		iommu-map = <0x0 &smmu TEGRA194_SID_PCIE0 0x1000>;
 		iommu-map-mask = <0x0>;
 		dma-coherent;
@@ -2437,7 +2590,6 @@
 		interconnects = <&mc TEGRA194_MEMORY_CLIENT_PCIE5R &emc>,
 				<&mc TEGRA194_MEMORY_CLIENT_PCIE5W &emc>;
 		interconnect-names = "dma-mem", "write";
-		iommus = <&smmu TEGRA194_SID_PCIE5>;
 		iommu-map = <0x0 &smmu TEGRA194_SID_PCIE5 0x1000>;
 		iommu-map-mask = <0x0>;
 		dma-coherent;
@@ -2467,7 +2619,7 @@
 		compatible = "nvidia,tegra186-bpmp";
 		mboxes = <&hsp_top0 TEGRA_HSP_MBOX_TYPE_DB
 				    TEGRA_HSP_DB_MASTER_BPMP>;
-		shmem = <&cpu_bpmp_tx &cpu_bpmp_rx>;
+		shmem = <&cpu_bpmp_tx>, <&cpu_bpmp_rx>;
 		#clock-cells = <1>;
 		#reset-cells = <1>;
 		#power-domain-cells = <1>;
@@ -2731,7 +2883,7 @@
 		iommus = <&smmu TEGRA194_SID_APE>;
 	};
 
-	tcu: tcu {
+	tcu: serial {
 		compatible = "nvidia,tegra194-tcu";
 		mboxes = <&hsp_top0 TEGRA_HSP_MBOX_TYPE_SM TEGRA_HSP_SM_RX(0)>,
 		         <&hsp_aon TEGRA_HSP_MBOX_TYPE_SM TEGRA_HSP_SM_TX(1)>;
@@ -2739,39 +2891,33 @@
 	};
 
 	thermal-zones {
-		cpu {
-			thermal-sensors = <&{/bpmp/thermal}
-					   TEGRA194_BPMP_THERMAL_ZONE_CPU>;
+		cpu-thermal {
+			thermal-sensors = <&{/bpmp/thermal} TEGRA194_BPMP_THERMAL_ZONE_CPU>;
 			status = "disabled";
 		};
 
-		gpu {
-			thermal-sensors = <&{/bpmp/thermal}
-					   TEGRA194_BPMP_THERMAL_ZONE_GPU>;
+		gpu-thermal {
+			thermal-sensors = <&{/bpmp/thermal} TEGRA194_BPMP_THERMAL_ZONE_GPU>;
 			status = "disabled";
 		};
 
-		aux {
-			thermal-sensors = <&{/bpmp/thermal}
-					   TEGRA194_BPMP_THERMAL_ZONE_AUX>;
+		aux-thermal {
+			thermal-sensors = <&{/bpmp/thermal} TEGRA194_BPMP_THERMAL_ZONE_AUX>;
 			status = "disabled";
 		};
 
-		pllx {
-			thermal-sensors = <&{/bpmp/thermal}
-					   TEGRA194_BPMP_THERMAL_ZONE_PLLX>;
+		pllx-thermal {
+			thermal-sensors = <&{/bpmp/thermal} TEGRA194_BPMP_THERMAL_ZONE_PLLX>;
 			status = "disabled";
 		};
 
-		ao {
-			thermal-sensors = <&{/bpmp/thermal}
-					   TEGRA194_BPMP_THERMAL_ZONE_AO>;
+		ao-thermal {
+			thermal-sensors = <&{/bpmp/thermal} TEGRA194_BPMP_THERMAL_ZONE_AO>;
 			status = "disabled";
 		};
 
-		tj {
-			thermal-sensors = <&{/bpmp/thermal}
-					   TEGRA194_BPMP_THERMAL_ZONE_TJ_MAX>;
+		tj-thermal {
+			thermal-sensors = <&{/bpmp/thermal} TEGRA194_BPMP_THERMAL_ZONE_TJ_MAX>;
 			status = "disabled";
 		};
 	};
diff --git a/dts/src/arm64/nvidia/tegra210-p2180.dtsi b/dts/src/arm64/nvidia/tegra210-p2180.dtsi
index 6077d572d8..75eb743a72 100644
--- a/dts/src/arm64/nvidia/tegra210-p2180.dtsi
+++ b/dts/src/arm64/nvidia/tegra210-p2180.dtsi
@@ -301,7 +301,7 @@
 		vqmmc-supply = <&vdd_1v8>;
 	};
 
-	clk32k_in: clock@0 {
+	clk32k_in: clock-32k {
 		compatible = "fixed-clock";
 		clock-frequency = <32768>;
 		#clock-cells = <0>;
@@ -336,7 +336,7 @@
 		method = "smc";
 	};
 
-	vdd_gpu: regulator@100 {
+	vdd_gpu: regulator-vdd-gpu {
 		compatible = "pwm-regulator";
 		pwms = <&pwm 1 8000>;
 		regulator-name = "VDD_GPU";
diff --git a/dts/src/arm64/nvidia/tegra210-p2371-2180.dts b/dts/src/arm64/nvidia/tegra210-p2371-2180.dts
index 2e17df6f20..328fbfec4e 100644
--- a/dts/src/arm64/nvidia/tegra210-p2371-2180.dts
+++ b/dts/src/arm64/nvidia/tegra210-p2371-2180.dts
@@ -11,11 +11,8 @@
 	pcie@1003000 {
 		status = "okay";
 
-		avdd-pll-uerefe-supply = <&avdd_1v05_pll>;
 		hvddio-pex-supply = <&vdd_1v8>;
 		dvddio-pex-supply = <&vdd_pex_1v05>;
-		dvdd-pex-pll-supply = <&vdd_pex_1v05>;
-		hvdd-pex-pll-e-supply = <&vdd_1v8>;
 		vddio-pex-ctl-supply = <&vdd_1v8>;
 
 		pci@1,0 {
diff --git a/dts/src/arm64/nvidia/tegra210-p2530.dtsi b/dts/src/arm64/nvidia/tegra210-p2530.dtsi
index 58aa051896..0a70daeffd 100644
--- a/dts/src/arm64/nvidia/tegra210-p2530.dtsi
+++ b/dts/src/arm64/nvidia/tegra210-p2530.dtsi
@@ -40,7 +40,7 @@
 		non-removable;
 	};
 
-	clk32k_in: clock@0 {
+	clk32k_in: clock-32k {
 		compatible = "fixed-clock";
 		clock-frequency = <32768>;
 		#clock-cells = <0>;
diff --git a/dts/src/arm64/nvidia/tegra210-p2597.dtsi b/dts/src/arm64/nvidia/tegra210-p2597.dtsi
index d8409c1b43..4b43b89a96 100644
--- a/dts/src/arm64/nvidia/tegra210-p2597.dtsi
+++ b/dts/src/arm64/nvidia/tegra210-p2597.dtsi
@@ -1361,11 +1361,6 @@
 		dvddio-pex-supply = <&vdd_pex_1v05>;
 		hvddio-pex-supply = <&vdd_1v8>;
 		avdd-usb-supply = <&vdd_3v3_sys>;
-		/* XXX what are these? */
-		avdd-pll-utmip-supply = <&vdd_1v8>;
-		avdd-pll-uerefe-supply = <&vdd_pex_1v05>;
-		dvdd-usb-ss-pll-supply = <&vdd_pex_1v05>;
-		hvdd-usb-ss-pll-e-supply = <&vdd_1v8>;
 
 		status = "okay";
 
@@ -1555,7 +1550,7 @@
 		};
 	};
 
-	vdd_sys_mux: regulator@0 {
+	vdd_sys_mux: regulator-vdd-sys-mux {
 		compatible = "regulator-fixed";
 		regulator-name = "VDD_SYS_MUX";
 		regulator-min-microvolt = <5000000>;
@@ -1564,7 +1559,7 @@
 		regulator-boot-on;
 	};
 
-	vdd_5v0_sys: regulator@1 {
+	vdd_5v0_sys: regulator-vdd-5v0-sys {
 		compatible = "regulator-fixed";
 		regulator-name = "VDD_5V0_SYS";
 		regulator-min-microvolt = <5000000>;
@@ -1576,7 +1571,7 @@
 		vin-supply = <&vdd_sys_mux>;
 	};
 
-	vdd_3v3_sys: regulator@2 {
+	vdd_3v3_sys: regulator-vdd-3v3-sys {
 		compatible = "regulator-fixed";
 		regulator-name = "VDD_3V3_SYS";
 		regulator-min-microvolt = <3300000>;
@@ -1588,10 +1583,9 @@
 		vin-supply = <&vdd_sys_mux>;
 
 		regulator-enable-ramp-delay = <160>;
-		regulator-disable-ramp-delay = <10000>;
 	};
 
-	vdd_5v0_io: regulator@3 {
+	vdd_5v0_io: regulator-vdd-5v0-io {
 		compatible = "regulator-fixed";
 		regulator-name = "VDD_5V0_IO_SYS";
 		regulator-min-microvolt = <5000000>;
@@ -1600,7 +1594,7 @@
 		regulator-boot-on;
 	};
 
-	vdd_3v3_sd: regulator@4 {
+	vdd_3v3_sd: regulator-vdd-3v3-sd {
 		compatible = "regulator-fixed";
 		regulator-name = "VDD_3V3_SD";
 		regulator-min-microvolt = <3300000>;
@@ -1610,10 +1604,9 @@
 		vin-supply = <&vdd_3v3_sys>;
 
 		regulator-enable-ramp-delay = <472>;
-		regulator-disable-ramp-delay = <4880>;
 	};
 
-	vdd_dsi_csi: regulator@5 {
+	vdd_dsi_csi: regulator-vdd-dsi-csi {
 		compatible = "regulator-fixed";
 		regulator-name = "AVDD_DSI_CSI_1V2";
 		regulator-min-microvolt = <1200000>;
@@ -1621,7 +1614,7 @@
 		vin-supply = <&vdd_sys_1v2>;
 	};
 
-	vdd_3v3_dis: regulator@6 {
+	vdd_3v3_dis: regulator-vdd-3v3-dis {
 		compatible = "regulator-fixed";
 		regulator-name = "VDD_DIS_3V3_LCD";
 		regulator-min-microvolt = <3300000>;
@@ -1632,7 +1625,7 @@
 		vin-supply = <&vdd_3v3_sys>;
 	};
 
-	vdd_1v8_dis: regulator@7 {
+	vdd_1v8_dis: regulator-vdd-1v8-dis {
 		compatible = "regulator-fixed";
 		regulator-name = "VDD_LCD_1V8_DIS";
 		regulator-min-microvolt = <1800000>;
@@ -1643,7 +1636,7 @@
 		vin-supply = <&vdd_1v8>;
 	};
 
-	vdd_5v0_rtl: regulator@8 {
+	vdd_5v0_rtl: regulator-vdd-5v0-rtl {
 		compatible = "regulator-fixed";
 		regulator-name = "RTL_5V";
 		regulator-min-microvolt = <5000000>;
@@ -1653,7 +1646,7 @@
 		vin-supply = <&vdd_5v0_sys>;
 	};
 
-	vdd_usb_vbus: regulator@9 {
+	vdd_usb_vbus: regulator-vdd-usb-vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "USB_VBUS_EN1";
 		regulator-min-microvolt = <5000000>;
@@ -1663,7 +1656,7 @@
 		vin-supply = <&vdd_5v0_sys>;
 	};
 
-	vdd_hdmi: regulator@10 {
+	vdd_hdmi: regulator-vdd-hdmi {
 		compatible = "regulator-fixed";
 		regulator-name = "VDD_HDMI_5V0";
 		regulator-min-microvolt = <5000000>;
@@ -1673,7 +1666,7 @@
 		vin-supply = <&vdd_5v0_sys>;
 	};
 
-	vdd_cam_1v2: regulator@11 {
+	vdd_cam_1v2: regulator-vdd-cam-1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd-cam-1v2";
 		regulator-min-microvolt = <1200000>;
@@ -1683,7 +1676,7 @@
 		vin-supply = <&vdd_3v3_sys>;
 	};
 
-	vdd_cam_2v8: regulator@12 {
+	vdd_cam_2v8: regulator-vdd-cam-2v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd-cam-2v8";
 		regulator-min-microvolt = <2800000>;
@@ -1693,7 +1686,7 @@
 		vin-supply = <&vdd_3v3_sys>;
 	};
 
-	vdd_cam_1v8: regulator@13 {
+	vdd_cam_1v8: regulator-vdd-cam-1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd-cam-1v8";
 		regulator-min-microvolt = <1800000>;
@@ -1703,7 +1696,7 @@
 		vin-supply = <&vdd_3v3_sys>;
 	};
 
-	vdd_usb_vbus_otg: regulator@14 {
+	vdd_usb_vbus_otg: regulator-vdd-usb-vbus-otg {
 		compatible = "regulator-fixed";
 		regulator-name = "USB_VBUS_EN0";
 		regulator-min-microvolt = <5000000>;
diff --git a/dts/src/arm64/nvidia/tegra210-p2894.dtsi b/dts/src/arm64/nvidia/tegra210-p2894.dtsi
index 41beab626d..10347b6e6e 100644
--- a/dts/src/arm64/nvidia/tegra210-p2894.dtsi
+++ b/dts/src/arm64/nvidia/tegra210-p2894.dtsi
@@ -1383,7 +1383,7 @@
 				};
 			};
 
-			gpio@0 {
+			hog-0 {
 				gpio-hog;
 				output-high;
 				gpios = <2 GPIO_ACTIVE_HIGH>,
@@ -1586,7 +1586,7 @@
 		status = "okay";
 	};
 
-	clk32k_in: clock@0 {
+	clk32k_in: clock-32k {
 		compatible = "fixed-clock";
 		clock-frequency = <32768>;
 		#clock-cells = <0>;
@@ -1635,7 +1635,7 @@
 		method = "smc";
 	};
 
-	battery_reg: regulator@0 {
+	battery_reg: regulator-vdd-ac-bat {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd-ac-bat";
 		regulator-min-microvolt = <5000000>;
@@ -1643,7 +1643,7 @@
 		regulator-always-on;
 	};
 
-	vdd_3v3: regulator@1 {
+	vdd_3v3: regulator-vdd-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd-3v3";
 		regulator-enable-ramp-delay = <160>;
@@ -1655,7 +1655,7 @@
 		enable-active-high;
 	};
 
-	max77620_gpio7: regulator@2 {
+	max77620_gpio7: regulator-max77620-gpio7 {
 		compatible = "regulator-fixed";
 		regulator-name = "max77620-gpio7";
 		regulator-enable-ramp-delay = <240>;
@@ -1669,7 +1669,7 @@
 		enable-active-high;
 	};
 
-	lcd_bl_en: regulator@3 {
+	lcd_bl_en: regulator-lcd-bl-en {
 		compatible = "regulator-fixed";
 		regulator-name = "lcd-bl-en";
 		regulator-min-microvolt = <1800000>;
@@ -1680,7 +1680,7 @@
 		enable-active-high;
 	};
 
-	en_vdd_sd: regulator@4 {
+	en_vdd_sd: regulator-vdd-sd {
 		compatible = "regulator-fixed";
 		regulator-name = "en-vdd-sd";
 		regulator-enable-ramp-delay = <472>;
@@ -1692,7 +1692,7 @@
 		enable-active-high;
 	};
 
-	en_vdd_cam: regulator@5 {
+	en_vdd_cam: regulator-vdd-cam {
 		compatible = "regulator-fixed";
 		regulator-name = "en-vdd-cam";
 		regulator-min-microvolt = <1800000>;
@@ -1702,7 +1702,7 @@
 		enable-active-high;
 	};
 
-	vdd_sys_boost: regulator@6 {
+	vdd_sys_boost: regulator-vdd-sys-boost {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd-sys-boost";
 		regulator-enable-ramp-delay = <3090>;
@@ -1714,7 +1714,7 @@
 		enable-active-high;
 	};
 
-	vdd_hdmi: regulator@7 {
+	vdd_hdmi: regulator-vdd-hdmi {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd-hdmi";
 		regulator-enable-ramp-delay = <468>;
@@ -1727,21 +1727,21 @@
 		enable-active-high;
 	};
 
-	en_vdd_cpu_fixed: regulator@8 {
+	en_vdd_cpu_fixed: regulator-vdd-cpu-fixed {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd-cpu-fixed";
 		regulator-min-microvolt = <1000000>;
 		regulator-max-microvolt = <1000000>;
 	};
 
-	vdd_aux_3v3: regulator@9 {
+	vdd_aux_3v3: regulator-vdd-aux-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "aux-3v3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 	};
 
-	vdd_snsr_pm: regulator@10 {
+	vdd_snsr_pm: regulator-vdd-snsr-pm {
 		compatible = "regulator-fixed";
 		regulator-name = "snsr_pm";
 		regulator-min-microvolt = <3300000>;
@@ -1750,7 +1750,7 @@
 		enable-active-high;
 	};
 
-	vdd_usb_5v0: regulator@11 {
+	vdd_usb_5v0: regulator-vdd-usb-5v0 {
 		compatible = "regulator-fixed";
 		status = "disabled";
 		regulator-name = "vdd-usb-5v0";
@@ -1761,7 +1761,7 @@
 		enable-active-high;
 	};
 
-	vdd_cdc_1v2_aud: regulator@101 {
+	vdd_cdc_1v2_aud: regulator-vdd-cdc-1v2-aud {
 		compatible = "regulator-fixed";
 		status = "disabled";
 		regulator-name = "vdd_cdc_1v2_aud";
@@ -1772,7 +1772,7 @@
 		enable-active-high;
 	};
 
-	vdd_disp_3v0: regulator@12 {
+	vdd_disp_3v0: regulator-vdd-disp-3v0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd-disp-3v0";
 		regulator-enable-ramp-delay = <232>;
@@ -1784,7 +1784,7 @@
 		enable-active-high;
 	};
 
-	vdd_fan: regulator@13 {
+	vdd_fan: regulator-vdd-fan {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd-fan";
 		regulator-enable-ramp-delay = <284>;
@@ -1795,7 +1795,7 @@
 		enable-active-high;
 	};
 
-	usb_vbus1: regulator@14 {
+	usb_vbus1: regulator-usb-vbus1 {
 		compatible = "regulator-fixed";
 		regulator-name = "usb-vbus1";
 		regulator-min-microvolt = <5000000>;
@@ -1806,7 +1806,7 @@
 		gpio-open-drain;
 	};
 
-	usb_vbus2: regulator@15 {
+	usb_vbus2: regulator-usb-vbus2 {
 		compatible = "regulator-fixed";
 		regulator-name = "usb-vbus2";
 		regulator-min-microvolt = <5000000>;
@@ -1817,7 +1817,7 @@
 		gpio-open-drain;
 	};
 
-	vdd_3v3_eth: regulator@16 {
+	vdd_3v3_eth: regulator-vdd-3v3-eth {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd-3v3-eth-a02";
 		regulator-min-microvolt = <3300000>;
diff --git a/dts/src/arm64/nvidia/tegra210-p3450-0000.dts b/dts/src/arm64/nvidia/tegra210-p3450-0000.dts
index 030f264ecc..72c2dc3c14 100644
--- a/dts/src/arm64/nvidia/tegra210-p3450-0000.dts
+++ b/dts/src/arm64/nvidia/tegra210-p3450-0000.dts
@@ -30,11 +30,8 @@
 	pcie@1003000 {
 		status = "okay";
 
-		avdd-pll-uerefe-supply = <&vdd_pex_1v05>;
 		hvddio-pex-supply = <&vdd_1v8>;
 		dvddio-pex-supply = <&vdd_pex_1v05>;
-		dvdd-pex-pll-supply = <&vdd_pex_1v05>;
-		hvdd-pex-pll-e-supply = <&vdd_1v8>;
 		vddio-pex-ctl-supply = <&vdd_1v8>;
 
 		pci@1,0 {
@@ -266,7 +263,6 @@
 					regulator-min-microvolt = <1000000>;
 					regulator-max-microvolt = <1170000>;
 					regulator-enable-ramp-delay = <146>;
-					regulator-disable-ramp-delay = <4080>;
 					regulator-ramp-delay = <27500>;
 					regulator-ramp-delay-scale = <300>;
 					regulator-always-on;
@@ -282,7 +278,6 @@
 					regulator-min-microvolt = <1150000>;
 					regulator-max-microvolt = <1150000>;
 					regulator-enable-ramp-delay = <176>;
-					regulator-disable-ramp-delay = <145800>;
 					regulator-ramp-delay = <27500>;
 					regulator-ramp-delay-scale = <300>;
 					regulator-always-on;
@@ -298,7 +293,6 @@
 					regulator-min-microvolt = <1350000>;
 					regulator-max-microvolt = <1350000>;
 					regulator-enable-ramp-delay = <176>;
-					regulator-disable-ramp-delay = <32000>;
 					regulator-ramp-delay = <27500>;
 					regulator-ramp-delay-scale = <350>;
 					regulator-always-on;
@@ -314,7 +308,6 @@
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <1800000>;
 					regulator-enable-ramp-delay = <242>;
-					regulator-disable-ramp-delay = <118000>;
 					regulator-ramp-delay = <27500>;
 					regulator-ramp-delay-scale = <360>;
 					regulator-always-on;
@@ -330,7 +323,6 @@
 					regulator-min-microvolt = <1200000>;
 					regulator-max-microvolt = <1200000>;
 					regulator-enable-ramp-delay = <26>;
-					regulator-disable-ramp-delay = <626>;
 					regulator-ramp-delay = <100000>;
 					regulator-ramp-delay-scale = <200>;
 					regulator-always-on;
@@ -346,7 +338,6 @@
 					regulator-min-microvolt = <1050000>;
 					regulator-max-microvolt = <1050000>;
 					regulator-enable-ramp-delay = <22>;
-					regulator-disable-ramp-delay = <650>;
 					regulator-ramp-delay = <100000>;
 					regulator-ramp-delay-scale = <200>;
 
@@ -360,7 +351,6 @@
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <3300000>;
 					regulator-enable-ramp-delay = <62>;
-					regulator-disable-ramp-delay = <650>;
 					regulator-ramp-delay = <100000>;
 					regulator-ramp-delay-scale = <200>;
 
@@ -378,7 +368,6 @@
 					regulator-min-microvolt = <850000>;
 					regulator-max-microvolt = <1100000>;
 					regulator-enable-ramp-delay = <22>;
-					regulator-disable-ramp-delay = <610>;
 					regulator-ramp-delay = <100000>;
 					regulator-ramp-delay-scale = <200>;
 					regulator-disable-active-discharge;
@@ -403,7 +392,6 @@
 					regulator-min-microvolt = <1050000>;
 					regulator-max-microvolt = <1050000>;
 					regulator-enable-ramp-delay = <24>;
-					regulator-disable-ramp-delay = <2768>;
 					regulator-ramp-delay = <100000>;
 					regulator-ramp-delay-scale = <200>;
 
@@ -417,7 +405,6 @@
 					regulator-min-microvolt = <1050000>;
 					regulator-max-microvolt = <1050000>;
 					regulator-enable-ramp-delay = <22>;
-					regulator-disable-ramp-delay = <1160>;
 					regulator-ramp-delay = <100000>;
 					regulator-ramp-delay-scale = <200>;
 
@@ -456,11 +443,6 @@
 		avdd-usb-supply = <&vdd_3v3_sys>;
 		dvddio-pex-supply = <&vdd_pex_1v05>;
 		hvddio-pex-supply = <&vdd_1v8>;
-		/* these really belong to the XUSB pad controller */
-		avdd-pll-utmip-supply = <&vdd_1v8>;
-		avdd-pll-uerefe-supply = <&vdd_pex_1v05>;
-		dvdd-usb-ss-pll-supply = <&vdd_pex_1v05>;
-		hvdd-usb-ss-pll-e-supply = <&vdd_1v8>;
 
 		status = "okay";
 	};
@@ -688,7 +670,7 @@
 					i2s4_port: port@1 {
 						reg = <1>;
 
-						i2s4_dap_ep: endpoint@0 {
+						i2s4_dap_ep: endpoint {
 							dai-format = "i2s";
 							/* Placeholder for external Codec */
 						};
@@ -706,7 +688,7 @@
 					port@0 {
 						reg = <0>;
 
-						dmic1_cif_ep: endpoint@0 {
+						dmic1_cif_ep: endpoint {
 							remote-endpoint = <&xbar_dmic1_ep>;
 						};
 					};
@@ -714,7 +696,7 @@
 					dmic1_port: port@1 {
 						reg = <1>;
 
-						dmic1_dap_ep: endpoint@0 {
+						dmic1_dap_ep: endpoint {
 							/* Placeholder for external Codec */
 						};
 					};
@@ -731,7 +713,7 @@
 					port@0 {
 						reg = <0>;
 
-						dmic2_cif_ep: endpoint@0 {
+						dmic2_cif_ep: endpoint {
 							remote-endpoint = <&xbar_dmic2_ep>;
 						};
 					};
@@ -739,7 +721,7 @@
 					dmic2_port: port@1 {
 						reg = <1>;
 
-						dmic2_dap_ep: endpoint@0 {
+						dmic2_dap_ep: endpoint {
 							/* Placeholder for external Codec */
 						};
 					};
@@ -1637,7 +1619,7 @@
 		status = "okay";
 
 		flash@0 {
-			compatible = "spi-nor";
+			compatible = "jedec,spi-nor";
 			reg = <0>;
 			spi-max-frequency = <104000000>;
 			spi-tx-bus-width = <2>;
@@ -1645,7 +1627,7 @@
 		};
 	};
 
-	clk32k_in: clock@0 {
+	clk32k_in: clock-32k {
 		compatible = "fixed-clock";
 		clock-frequency = <32768>;
 		#clock-cells = <0>;
@@ -1684,7 +1666,7 @@
 	};
 
 	thermal-zones {
-		cpu {
+		cpu-thermal {
 			trips {
 				cpu_trip_critical: critical {
 					temperature = <96500>;
@@ -1762,7 +1744,7 @@
 		method = "smc";
 	};
 
-	vdd_5v0_sys: regulator@0 {
+	vdd_5v0_sys: regulator-vdd-5v0-sys {
 		compatible = "regulator-fixed";
 
 		regulator-name = "VDD_5V0_SYS";
@@ -1772,14 +1754,13 @@
 		regulator-boot-on;
 	};
 
-	vdd_3v3_sys: regulator@1 {
+	vdd_3v3_sys: regulator-vdd-3v3-sys {
 		compatible = "regulator-fixed";
 
 		regulator-name = "VDD_3V3_SYS";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 		regulator-enable-ramp-delay = <240>;
-		regulator-disable-ramp-delay = <11340>;
 		regulator-always-on;
 		regulator-boot-on;
 
@@ -1789,7 +1770,7 @@
 		vin-supply = <&vdd_5v0_sys>;
 	};
 
-	vdd_3v3_sd: regulator@2 {
+	vdd_3v3_sd: regulator-vdd-3v3-sd {
 		compatible = "regulator-fixed";
 
 		regulator-name = "VDD_3V3_SD";
@@ -1802,7 +1783,7 @@
 		vin-supply = <&vdd_3v3_sys>;
 	};
 
-	vdd_hdmi: regulator@3 {
+	vdd_hdmi: regulator-vdd-hdmi-5v0 {
 		compatible = "regulator-fixed";
 
 		regulator-name = "VDD_HDMI_5V0";
@@ -1812,7 +1793,7 @@
 		vin-supply = <&vdd_5v0_sys>;
 	};
 
-	vdd_hub_3v3: regulator@4 {
+	vdd_hub_3v3: regulator-vdd-hub-3v3 {
 		compatible = "regulator-fixed";
 
 		regulator-name = "VDD_HUB_3V3";
@@ -1825,7 +1806,7 @@
 		vin-supply = <&vdd_5v0_sys>;
 	};
 
-	vdd_cpu: regulator@5 {
+	vdd_cpu: regulator-vdd-cpu {
 		compatible = "regulator-fixed";
 
 		regulator-name = "VDD_CPU";
@@ -1840,7 +1821,7 @@
 		vin-supply = <&vdd_5v0_sys>;
 	};
 
-	vdd_gpu: regulator@6 {
+	vdd_gpu: regulator-vdd-gpu {
 		compatible = "pwm-regulator";
 		pwms = <&pwm 1 8000>;
 
@@ -1855,7 +1836,7 @@
 		vin-supply = <&vdd_5v0_sys>;
 	};
 
-	avdd_io_edp_1v05: regulator@7 {
+	avdd_io_edp_1v05: regulator-avdd-io-epd-1v05 {
 		compatible = "regulator-fixed";
 
 		regulator-name = "AVDD_IO_EDP_1V05";
@@ -1868,7 +1849,7 @@
 		vin-supply = <&avdd_1v05_pll>;
 	};
 
-	vdd_5v0_usb: regulator@8 {
+	vdd_5v0_usb: regulator-vdd-5v-usb {
 		compatible = "regulator-fixed";
 
 		regulator-name = "VDD_5V_USB";
diff --git a/dts/src/arm64/nvidia/tegra210-smaug.dts b/dts/src/arm64/nvidia/tegra210-smaug.dts
index 131c064d69..a263d51882 100644
--- a/dts/src/arm64/nvidia/tegra210-smaug.dts
+++ b/dts/src/arm64/nvidia/tegra210-smaug.dts
@@ -1642,10 +1642,6 @@
 		dvddio-pex-supply = <&avddio_1v05>;
 		hvddio-pex-supply = <&pp1800>;
 		avdd-usb-supply = <&pp3300>;
-		avdd-pll-utmip-supply = <&pp1800>;
-		avdd-pll-uerefe-supply = <&pp1050_avdd>;
-		dvdd-pex-pll-supply = <&avddio_1v05>;
-		hvdd-pex-pll-e-supply = <&pp1800>;
 
 		status = "okay";
 	};
@@ -1726,7 +1722,7 @@
 		};
 	};
 
-	clk32k_in: clock@0 {
+	clk32k_in: clock-32k {
 		compatible = "fixed-clock";
 		clock-frequency = <32768>;
 		#clock-cells = <0>;
@@ -1807,7 +1803,7 @@
 		method = "smc";
 	};
 
-	ppvar_sys: regulator@0 {
+	ppvar_sys: regulator-ppvar-sys {
 		compatible = "regulator-fixed";
 		regulator-name = "PPVAR_SYS";
 		regulator-min-microvolt = <4400000>;
@@ -1815,7 +1811,7 @@
 		regulator-always-on;
 	};
 
-	pplcd_vdd: regulator@1 {
+	pplcd_vdd: regulator-pplcd-vdd {
 		compatible = "regulator-fixed";
 		regulator-name = "PPLCD_VDD";
 		regulator-min-microvolt = <4400000>;
@@ -1825,7 +1821,7 @@
 		regulator-boot-on;
 	};
 
-	pp3000_always: regulator@2 {
+	pp3000_always: regulator-pp3000-always {
 		compatible = "regulator-fixed";
 		regulator-name = "PP3000_ALWAYS";
 		regulator-min-microvolt = <3000000>;
@@ -1833,7 +1829,7 @@
 		regulator-always-on;
 	};
 
-	pp3300: regulator@3 {
+	pp3300: regulator-pp3000 {
 		compatible = "regulator-fixed";
 		regulator-name = "PP3300";
 		regulator-min-microvolt = <3300000>;
@@ -1843,7 +1839,7 @@
 		enable-active-high;
 	};
 
-	pp5000: regulator@4 {
+	pp5000: regulator-pp5000 {
 		compatible = "regulator-fixed";
 		regulator-name = "PP5000";
 		regulator-min-microvolt = <5000000>;
@@ -1851,7 +1847,7 @@
 		regulator-always-on;
 	};
 
-	pp1800_lcdio: regulator@5 {
+	pp1800_lcdio: regulator-pp1800-lcdio {
 		compatible = "regulator-fixed";
 		regulator-name = "PP1800_LCDIO";
 		regulator-min-microvolt = <1800000>;
@@ -1861,7 +1857,7 @@
 		regulator-boot-on;
 	};
 
-	pp1800_cam: regulator@6 {
+	pp1800_cam: regulator-pp1800-cam {
 		compatible = "regulator-fixed";
 		regulator-name = "PP1800_CAM";
 		regulator-min-microvolt = <1800000>;
@@ -1870,7 +1866,7 @@
 		enable-active-high;
 	};
 
-	usbc_vbus: regulator@7 {
+	usbc_vbus: regulator-usbc-vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "USBC_VBUS";
 		regulator-min-microvolt = <5000000>;
diff --git a/dts/src/arm64/nvidia/tegra210.dtsi b/dts/src/arm64/nvidia/tegra210.dtsi
index ccdc0dec4e..218a2b3220 100644
--- a/dts/src/arm64/nvidia/tegra210.dtsi
+++ b/dts/src/arm64/nvidia/tegra210.dtsi
@@ -93,8 +93,8 @@
 		interrupt-names = "syncpt", "host1x";
 		clocks = <&tegra_car TEGRA210_CLK_HOST1X>;
 		clock-names = "host1x";
-		resets = <&tegra_car 28>;
-		reset-names = "host1x";
+		resets = <&tegra_car 28>, <&mc TEGRA210_MC_RESET_HC>;
+		reset-names = "host1x", "mc";
 
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -181,6 +181,12 @@
 		tsec@54100000 {
 			compatible = "nvidia,tegra210-tsec";
 			reg = <0x0 0x54100000 0x0 0x00040000>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA210_CLK_TSEC>;
+			clock-names = "tsec";
+			resets = <&tegra_car 83>;
+			reset-names = "tsec";
+			status = "disabled";
 		};
 
 		dc@54200000 {
@@ -283,6 +289,11 @@
 		tsec@54500000 {
 			compatible = "nvidia,tegra210-tsec";
 			reg = <0x0 0x54500000 0x0 0x00040000>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA210_CLK_TSECB>;
+			clock-names = "tsec";
+			resets = <&tegra_car 206>;
+			reset-names = "tsec";
 			status = "disabled";
 		};
 
@@ -1015,8 +1026,8 @@
 			 <&tegra_car TEGRA210_CLK_XUSB_HOST_SRC>,
 			 <&tegra_car TEGRA210_CLK_XUSB_FALCON_SRC>,
 			 <&tegra_car TEGRA210_CLK_XUSB_SS>,
-			 <&tegra_car TEGRA210_CLK_XUSB_SS_SRC>,
 			 <&tegra_car TEGRA210_CLK_XUSB_SS_DIV2>,
+			 <&tegra_car TEGRA210_CLK_XUSB_SS_SRC>,
 			 <&tegra_car TEGRA210_CLK_XUSB_HS_SRC>,
 			 <&tegra_car TEGRA210_CLK_XUSB_FS_SRC>,
 			 <&tegra_car TEGRA210_CLK_PLL_U_480M>,
@@ -1024,7 +1035,7 @@
 			 <&tegra_car TEGRA210_CLK_PLL_E>;
 		clock-names = "xusb_host", "xusb_host_src",
 			      "xusb_falcon_src", "xusb_ss",
-			      "xusb_ss_src", "xusb_ss_div2",
+			      "xusb_ss_div2", "xusb_ss_src",
 			      "xusb_hs_src", "xusb_fs_src",
 			      "pll_u_480m", "clk_m", "pll_e";
 		resets = <&tegra_car 89>, <&tegra_car 156>,
@@ -1981,7 +1992,7 @@
 	};
 
 	thermal-zones {
-		cpu {
+		cpu-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <0>;
 
@@ -2010,7 +2021,7 @@
 			};
 		};
 
-		mem {
+		mem-thermal {
 			polling-delay-passive = <0>;
 			polling-delay = <0>;
 
@@ -2056,7 +2067,7 @@
 			};
 		};
 
-		gpu {
+		gpu-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <0>;
 
@@ -2085,7 +2096,7 @@
 			};
 		};
 
-		pllx {
+		pllx-thermal {
 			polling-delay-passive = <0>;
 			polling-delay = <0>;
 
diff --git a/dts/src/arm64/nvidia/tegra234-p3701-0000.dtsi b/dts/src/arm64/nvidia/tegra234-p3701-0000.dtsi
new file mode 100644
index 0000000000..d95a542c0b
--- /dev/null
+++ b/dts/src/arm64/nvidia/tegra234-p3701-0000.dtsi
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include "tegra234.dtsi"
+
+/ {
+	model = "NVIDIA Jetson AGX Orin";
+	compatible = "nvidia,p3701-0000", "nvidia,tegra234";
+
+	bus@0 {
+		mmc@3460000 {
+			status = "okay";
+			bus-width = <8>;
+			non-removable;
+		};
+
+		rtc@c2a0000 {
+			status = "okay";
+		};
+
+		pmc@c360000 {
+			nvidia,invert-interrupt;
+		};
+	};
+};
diff --git a/dts/src/arm64/nvidia/tegra234-p3737-0000+p3701-0000.dts b/dts/src/arm64/nvidia/tegra234-p3737-0000+p3701-0000.dts
new file mode 100644
index 0000000000..efbbb878ba
--- /dev/null
+++ b/dts/src/arm64/nvidia/tegra234-p3737-0000+p3701-0000.dts
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra234-p3701-0000.dtsi"
+#include "tegra234-p3737-0000.dtsi"
+
+/ {
+	model = "NVIDIA Jetson AGX Orin Developer Kit";
+	compatible = "nvidia,p3737-0000+p3701-0000", "nvidia,p3701-0000", "nvidia,tegra234";
+
+	aliases {
+		mmc3 = "/bus@0/mmc@3460000";
+		serial0 = &tcu;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = "serial0:115200n8";
+	};
+
+	serial {
+		status = "okay";
+	};
+};
diff --git a/dts/src/arm64/nvidia/tegra234-p3737-0000.dtsi b/dts/src/arm64/nvidia/tegra234-p3737-0000.dtsi
new file mode 100644
index 0000000000..a85993c85e
--- /dev/null
+++ b/dts/src/arm64/nvidia/tegra234-p3737-0000.dtsi
@@ -0,0 +1,5 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/ {
+	compatible = "nvidia,p3737-0000";
+};
diff --git a/dts/src/arm64/nvidia/tegra234-sim-vdk.dts b/dts/src/arm64/nvidia/tegra234-sim-vdk.dts
index b5d9a55262..5804acfc42 100644
--- a/dts/src/arm64/nvidia/tegra234-sim-vdk.dts
+++ b/dts/src/arm64/nvidia/tegra234-sim-vdk.dts
@@ -26,7 +26,6 @@
 			status = "okay";
 			bus-width = <8>;
 			non-removable;
-			only-1-8-v;
 		};
 
 		rtc@c2a0000 {
diff --git a/dts/src/arm64/nvidia/tegra234.dtsi b/dts/src/arm64/nvidia/tegra234.dtsi
index f0efb3a628..6b6f15804a 100644
--- a/dts/src/arm64/nvidia/tegra234.dtsi
+++ b/dts/src/arm64/nvidia/tegra234.dtsi
@@ -3,6 +3,7 @@
 #include <dt-bindings/clock/tegra234-clock.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/mailbox/tegra186-hsp.h>
+#include <dt-bindings/memory/tegra234-mc.h>
 #include <dt-bindings/reset/tegra234-reset.h>
 
 / {
@@ -25,6 +26,113 @@
 			status = "okay";
 		};
 
+		gpio: gpio@2200000 {
+			compatible = "nvidia,tegra234-gpio";
+			reg-names = "security", "gpio";
+			reg = <0x02200000 0x10000>,
+			      <0x02210000 0x10000>;
+			interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 291 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			#gpio-cells = <2>;
+			gpio-controller;
+		};
+
+		mc: memory-controller@2c00000 {
+			compatible = "nvidia,tegra234-mc";
+			reg = <0x02c00000 0x100000>,
+			      <0x02b80000 0x040000>,
+			      <0x01700000 0x100000>;
+			interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
+			#interconnect-cells = <1>;
+			status = "okay";
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+
+			ranges = <0x01700000 0x0 0x01700000 0x0 0x100000>,
+				 <0x02b80000 0x0 0x02b80000 0x0 0x040000>,
+				 <0x02c00000 0x0 0x02c00000 0x0 0x100000>;
+
+			/*
+			 * Bit 39 of addresses passing through the memory
+			 * controller selects the XBAR format used when memory
+			 * is accessed. This is used to transparently access
+			 * memory in the XBAR format used by the discrete GPU
+			 * (bit 39 set) or Tegra (bit 39 clear).
+			 *
+			 * As a consequence, the operating system must ensure
+			 * that bit 39 is never used implicitly, for example
+			 * via an I/O virtual address mapping of an IOMMU. If
+			 * devices require access to the XBAR switch, their
+			 * drivers must set this bit explicitly.
+			 *
+			 * Limit the DMA range for memory clients to [38:0].
+			 */
+			dma-ranges = <0x0 0x0 0x0 0x80 0x0>;
+
+			emc: external-memory-controller@2c60000 {
+				compatible = "nvidia,tegra234-emc";
+				reg = <0x0 0x02c60000 0x0 0x90000>,
+				      <0x0 0x01780000 0x0 0x80000>;
+				interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&bpmp TEGRA234_CLK_EMC>;
+				clock-names = "emc";
+				status = "okay";
+
+				#interconnect-cells = <0>;
+
+				nvidia,bpmp = <&bpmp>;
+			};
+		};
+
 		uarta: serial@3100000 {
 			compatible = "nvidia,tegra234-uart", "nvidia,tegra20-uart";
 			reg = <0x03100000 0x10000>;
@@ -40,11 +148,27 @@
 			compatible = "nvidia,tegra234-sdhci", "nvidia,tegra186-sdhci";
 			reg = <0x03460000 0x20000>;
 			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&bpmp TEGRA234_CLK_SDMMC4>;
-			clock-names = "sdhci";
+			clocks = <&bpmp TEGRA234_CLK_SDMMC4>,
+				 <&bpmp TEGRA234_CLK_SDMMC_LEGACY_TM>;
+			clock-names = "sdhci", "tmclk";
+			assigned-clocks = <&bpmp TEGRA234_CLK_SDMMC4>,
+					  <&bpmp TEGRA234_CLK_PLLC4>;
+			assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLC4>;
 			resets = <&bpmp TEGRA234_RESET_SDMMC4>;
 			reset-names = "sdhci";
-			dma-coherent;
+			interconnects = <&mc TEGRA234_MEMORY_CLIENT_SDMMCRAB &emc>,
+					<&mc TEGRA234_MEMORY_CLIENT_SDMMCWAB &emc>;
+			interconnect-names = "dma-mem", "write";
+			nvidia,pad-autocal-pull-up-offset-hs400 = <0x00>;
+			nvidia,pad-autocal-pull-down-offset-hs400 = <0x00>;
+			nvidia,pad-autocal-pull-up-offset-1v8-timeout = <0x0a>;
+			nvidia,pad-autocal-pull-down-offset-1v8-timeout = <0x0a>;
+			nvidia,pad-autocal-pull-up-offset-3v3-timeout = <0x0a>;
+			nvidia,pad-autocal-pull-down-offset-3v3-timeout = <0x0a>;
+			nvidia,default-tap = <0x8>;
+			nvidia,default-trim = <0x14>;
+			nvidia,dqs-trim = <40>;
+			supports-cqe;
 			status = "disabled";
 		};
 
@@ -93,9 +217,26 @@
 			reg = <0x0c2a0000 0x10000>;
 			interrupt-parent = <&pmc>;
 			interrupts = <73 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&bpmp TEGRA234_CLK_CLK_32K>;
+			clock-names = "rtc";
 			status = "disabled";
 		};
 
+		gpio_aon: gpio@c2f0000 {
+			compatible = "nvidia,tegra234-gpio-aon";
+			reg-names = "security", "gpio";
+			reg = <0x0c2f0000 0x1000>,
+			      <0x0c2f1000 0x1000>;
+			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			#gpio-cells = <2>;
+			gpio-controller;
+		};
+
 		pmc: pmc@c360000 {
 			compatible = "nvidia,tegra234-pmc";
 			reg = <0x0c360000 0x10000>,
@@ -122,21 +263,21 @@
 		};
 	};
 
-	sysram@40000000 {
+	sram@40000000 {
 		compatible = "nvidia,tegra234-sysram", "mmio-sram";
-		reg = <0x0 0x40000000 0x0 0x50000>;
+		reg = <0x0 0x40000000 0x0 0x80000>;
 		#address-cells = <1>;
 		#size-cells = <1>;
-		ranges = <0x0 0x0 0x40000000 0x50000>;
+		ranges = <0x0 0x0 0x40000000 0x80000>;
 
-		cpu_bpmp_tx: shmem@4e000 {
-			reg = <0x4e000 0x1000>;
+		cpu_bpmp_tx: sram@70000 {
+			reg = <0x70000 0x1000>;
 			label = "cpu-bpmp-tx";
 			pool;
 		};
 
-		cpu_bpmp_rx: shmem@4f000 {
-			reg = <0x4f000 0x1000>;
+		cpu_bpmp_rx: sram@71000 {
+			reg = <0x71000 0x1000>;
 			label = "cpu-bpmp-rx";
 			pool;
 		};
@@ -146,10 +287,15 @@
 		compatible = "nvidia,tegra234-bpmp", "nvidia,tegra186-bpmp";
 		mboxes = <&hsp_top0 TEGRA_HSP_MBOX_TYPE_DB
 				    TEGRA_HSP_DB_MASTER_BPMP>;
-		shmem = <&cpu_bpmp_tx &cpu_bpmp_rx>;
+		shmem = <&cpu_bpmp_tx>, <&cpu_bpmp_rx>;
 		#clock-cells = <1>;
 		#reset-cells = <1>;
 		#power-domain-cells = <1>;
+		interconnects = <&mc TEGRA234_MEMORY_CLIENT_BPMPR &emc>,
+				<&mc TEGRA234_MEMORY_CLIENT_BPMPW &emc>,
+				<&mc TEGRA234_MEMORY_CLIENT_BPMPDMAR &emc>,
+				<&mc TEGRA234_MEMORY_CLIENT_BPMPDMAW &emc>;
+		interconnect-names = "read", "write", "dma-mem", "dma-write";
 
 		bpmp_i2c: i2c {
 			compatible = "nvidia,tegra186-bpmp-i2c";
@@ -163,12 +309,373 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		cpu@0 {
+		cpu0_0: cpu@0 {
+			compatible = "arm,cortex-a78";
+			device_type = "cpu";
+			reg = <0x00000>;
+
+			enable-method = "psci";
+
+			i-cache-size = <65536>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2c0_0>;
+		};
+
+		cpu0_1: cpu@100 {
+			compatible = "arm,cortex-a78";
+			device_type = "cpu";
+			reg = <0x00100>;
+
+			enable-method = "psci";
+
+			i-cache-size = <65536>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2c0_1>;
+		};
+
+		cpu0_2: cpu@200 {
+			compatible = "arm,cortex-a78";
+			device_type = "cpu";
+			reg = <0x00200>;
+
+			enable-method = "psci";
+
+			i-cache-size = <65536>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2c0_2>;
+		};
+
+		cpu0_3: cpu@300 {
+			compatible = "arm,cortex-a78";
+			device_type = "cpu";
+			reg = <0x00300>;
+
+			enable-method = "psci";
+
+			i-cache-size = <65536>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2c0_3>;
+		};
+
+		cpu1_0: cpu@10000 {
+			compatible = "arm,cortex-a78";
+			device_type = "cpu";
+			reg = <0x10000>;
+
+			enable-method = "psci";
+
+			i-cache-size = <65536>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2c1_0>;
+		};
+
+		cpu1_1: cpu@10100 {
+			compatible = "arm,cortex-a78";
+			device_type = "cpu";
+			reg = <0x10100>;
+
+			enable-method = "psci";
+
+			i-cache-size = <65536>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2c1_1>;
+		};
+
+		cpu1_2: cpu@10200 {
+			compatible = "arm,cortex-a78";
+			device_type = "cpu";
+			reg = <0x10200>;
+
+			enable-method = "psci";
+
+			i-cache-size = <65536>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2c1_2>;
+		};
+
+		cpu1_3: cpu@10300 {
+			compatible = "arm,cortex-a78";
+			device_type = "cpu";
+			reg = <0x10300>;
+
+			enable-method = "psci";
+
+			i-cache-size = <65536>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2c1_3>;
+		};
+
+		cpu2_0: cpu@20000 {
+			compatible = "arm,cortex-a78";
 			device_type = "cpu";
-			reg = <0x000>;
+			reg = <0x20000>;
 
 			enable-method = "psci";
+
+			i-cache-size = <65536>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2c2_0>;
+		};
+
+		cpu2_1: cpu@20100 {
+			compatible = "arm,cortex-a78";
+			device_type = "cpu";
+			reg = <0x20100>;
+
+			enable-method = "psci";
+
+			i-cache-size = <65536>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2c2_1>;
+		};
+
+		cpu2_2: cpu@20200 {
+			compatible = "arm,cortex-a78";
+			device_type = "cpu";
+			reg = <0x20200>;
+
+			enable-method = "psci";
+
+			i-cache-size = <65536>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2c2_2>;
+		};
+
+		cpu2_3: cpu@20300 {
+			compatible = "arm,cortex-a78";
+			device_type = "cpu";
+			reg = <0x20300>;
+
+			enable-method = "psci";
+
+			i-cache-size = <65536>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2c2_3>;
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0_0>;
+				};
+
+				core1 {
+					cpu = <&cpu0_1>;
+				};
+
+				core2 {
+					cpu = <&cpu0_2>;
+				};
+
+				core3 {
+					cpu = <&cpu0_3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu1_0>;
+				};
+
+				core1 {
+					cpu = <&cpu1_1>;
+				};
+
+				core2 {
+					cpu = <&cpu1_2>;
+				};
+
+				core3 {
+					cpu = <&cpu1_3>;
+				};
+			};
+
+			cluster2 {
+				core0 {
+					cpu = <&cpu2_0>;
+				};
+
+				core1 {
+					cpu = <&cpu2_1>;
+				};
+
+				core2 {
+					cpu = <&cpu2_2>;
+				};
+
+				core3 {
+					cpu = <&cpu2_3>;
+				};
+			};
+		};
+
+		l2c0_0: l2-cache00 {
+			cache-size = <262144>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+			cache-unified;
+			next-level-cache = <&l3c0>;
 		};
+
+		l2c0_1: l2-cache01 {
+			cache-size = <262144>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+			cache-unified;
+			next-level-cache = <&l3c0>;
+		};
+
+		l2c0_2: l2-cache02 {
+			cache-size = <262144>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+			cache-unified;
+			next-level-cache = <&l3c0>;
+		};
+
+		l2c0_3: l2-cache03 {
+			cache-size = <262144>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+			cache-unified;
+			next-level-cache = <&l3c0>;
+		};
+
+		l2c1_0: l2-cache10 {
+			cache-size = <262144>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+			cache-unified;
+			next-level-cache = <&l3c1>;
+		};
+
+		l2c1_1: l2-cache11 {
+			cache-size = <262144>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+			cache-unified;
+			next-level-cache = <&l3c1>;
+		};
+
+		l2c1_2: l2-cache12 {
+			cache-size = <262144>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+			cache-unified;
+			next-level-cache = <&l3c1>;
+		};
+
+		l2c1_3: l2-cache13 {
+			cache-size = <262144>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+			cache-unified;
+			next-level-cache = <&l3c1>;
+		};
+
+		l2c2_0: l2-cache20 {
+			cache-size = <262144>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+			cache-unified;
+			next-level-cache = <&l3c2>;
+		};
+
+		l2c2_1: l2-cache21 {
+			cache-size = <262144>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+			cache-unified;
+			next-level-cache = <&l3c2>;
+		};
+
+		l2c2_2: l2-cache22 {
+			cache-size = <262144>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+			cache-unified;
+			next-level-cache = <&l3c2>;
+		};
+
+		l2c2_3: l2-cache23 {
+			cache-size = <262144>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+			cache-unified;
+			next-level-cache = <&l3c2>;
+		};
+
+		l3c0: l3-cache0 {
+			cache-size = <2097152>;
+			cache-line-size = <64>;
+			cache-sets = <2048>;
+		};
+
+		l3c1: l3-cache1 {
+			cache-size = <2097152>;
+			cache-line-size = <64>;
+			cache-sets = <2048>;
+		};
+
+		l3c2: l3-cache2 {
+			cache-size = <2097152>;
+			cache-line-size = <64>;
+			cache-sets = <2048>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a78-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+		status = "okay";
 	};
 
 	psci {
@@ -177,6 +684,14 @@
 		method = "smc";
 	};
 
+	tcu: serial {
+		compatible = "nvidia,tegra234-tcu", "nvidia,tegra194-tcu";
+		mboxes = <&hsp_top0 TEGRA_HSP_MBOX_TYPE_SM TEGRA_HSP_SM_RX(0)>,
+			 <&hsp_aon TEGRA_HSP_MBOX_TYPE_SM TEGRA_HSP_SM_TX(1)>;
+		mbox-names = "rx", "tx";
+		status = "disabled";
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
diff --git a/dts/src/arm64/qcom/apq8096-db820c.dts b/dts/src/arm64/qcom/apq8096-db820c.dts
index d01a512634..f623db8451 100644
--- a/dts/src/arm64/qcom/apq8096-db820c.dts
+++ b/dts/src/arm64/qcom/apq8096-db820c.dts
@@ -166,6 +166,7 @@
 
 &adsp_pil {
 	status = "okay";
+	firmware-name = "qcom/apq8096/adsp.mbn";
 };
 
 &blsp2_i2c1 {
@@ -232,6 +233,7 @@
 &hsusb_phy1 {
 	status = "okay";
 
+	vdd-supply = <&vreg_l28a_0p925>;
 	vdda-pll-supply = <&vreg_l12a_1p8>;
 	vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
 };
@@ -239,6 +241,7 @@
 &hsusb_phy2 {
 	status = "okay";
 
+	vdd-supply = <&vreg_l28a_0p925>;
 	vdda-pll-supply = <&vreg_l12a_1p8>;
 	vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
 };
@@ -632,6 +635,8 @@
 
 &pm8994_spmi_regulators {
 	qcom,saw-reg = <&saw3>;
+	vdd_s11-supply = <&vph_pwr>;
+
 	s9 {
 		qcom,saw-slave;
 	};
@@ -640,6 +645,7 @@
 	};
 	s11 {
 		qcom,saw-leader;
+		regulator-name = "VDD_APCC";
 		regulator-always-on;
 		regulator-min-microvolt = <980000>;
 		regulator-max-microvolt = <980000>;
@@ -672,6 +678,8 @@
 };
 
 &pmi8994_spmi_regulators {
+	vdd_s2-supply = <&vph_pwr>;
+
 	vdd_gfx: s2@1700 {
 		reg = <0x1700 0x100>;
 		regulator-name = "VDD_GFX";
@@ -709,7 +717,7 @@
 		vdd_l17_l29-supply = <&vph_pwr_bbyp>;
 		vdd_l20_l21-supply = <&vph_pwr_bbyp>;
 		vdd_l25-supply = <&vreg_s3a_1p3>;
-		vdd_lvs1_lvs2-supply = <&vreg_s4a_1p8>;
+		vdd_lvs1_2-supply = <&vreg_s4a_1p8>;
 
 		vreg_s3a_1p3: s3 {
 			regulator-name = "vreg_s3a_1p3";
diff --git a/dts/src/arm64/qcom/ipq6018.dtsi b/dts/src/arm64/qcom/ipq6018.dtsi
index 933b56103a..66ec561565 100644
--- a/dts/src/arm64/qcom/ipq6018.dtsi
+++ b/dts/src/arm64/qcom/ipq6018.dtsi
@@ -220,7 +220,7 @@
 			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
 			#gpio-cells = <2>;
-			gpio-ranges = <&tlmm 0 80>;
+			gpio-ranges = <&tlmm 0 0 80>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
 
diff --git a/dts/src/arm64/qcom/ipq8074.dtsi b/dts/src/arm64/qcom/ipq8074.dtsi
index 6c6a0f8536..e6cc261201 100644
--- a/dts/src/arm64/qcom/ipq8074.dtsi
+++ b/dts/src/arm64/qcom/ipq8074.dtsi
@@ -230,6 +230,18 @@
 			};
 		};
 
+		mdio: mdio@90000 {
+			compatible = "qcom,ipq4019-mdio";
+			reg = <0x00090000 0x64>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			clocks = <&gcc GCC_MDIO_AHB_CLK>;
+			clock-names = "gcc_mdio_ahb_clk";
+
+			status = "disabled";
+		};
+
 		prng: rng@e3000 {
 			compatible = "qcom,prng-ee";
 			reg = <0x000e3000 0x1000>;
diff --git a/dts/src/arm64/qcom/msm8916-samsung-j5.dts b/dts/src/arm64/qcom/msm8916-samsung-j5.dts
new file mode 100644
index 0000000000..687bea438a
--- /dev/null
+++ b/dts/src/arm64/qcom/msm8916-samsung-j5.dts
@@ -0,0 +1,209 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8916-pm8916.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Samsung Galaxy J5 (2015)";
+	compatible = "samsung,j5", "qcom,msm8916";
+	chassis-type = "handset";
+
+	aliases {
+		serial0 = &blsp1_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+
+	reserved-memory {
+		/* Additional memory used by Samsung firmware modifications */
+		tz-apps@85500000 {
+			reg = <0x0 0x85500000 0x0 0xb00000>;
+			no-map;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_default>;
+
+		label = "GPIO Buttons";
+
+		volume-up {
+			label = "Volume Up";
+			gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		home-key {
+			lable = "Home Key";
+			gpios = <&msmgpio 109 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOMEPAGE>;
+		};
+	};
+};
+
+&blsp1_uart2 {
+	status = "okay";
+};
+
+&pm8916_resin {
+	status = "okay";
+	linux,code = <KEY_VOLUMEDOWN>;
+};
+
+/* FIXME: Replace with SM5703 MUIC when driver is available */
+&pm8916_usbin {
+	status = "okay";
+};
+
+&pronto {
+	status = "okay";
+};
+
+&sdhc_1 {
+	status = "okay";
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
+	pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
+};
+
+&sdhc_2 {
+	status = "okay";
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
+	pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
+
+	cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>;
+};
+
+&usb {
+	status = "okay";
+	dr_mode = "peripheral";
+	extcon = <&pm8916_usbin>;
+};
+
+&usb_hs_phy {
+	extcon = <&pm8916_usbin>;
+	qcom,init-seq = /bits/ 8 <0x1 0x19 0x2 0x0b>;
+};
+
+&smd_rpm_regulators {
+	vdd_l1_l2_l3-supply = <&pm8916_s3>;
+	vdd_l4_l5_l6-supply = <&pm8916_s4>;
+	vdd_l7-supply = <&pm8916_s4>;
+
+	s3 {
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1300000>;
+	};
+
+	s4 {
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <2100000>;
+	};
+
+	l1 {
+		regulator-min-microvolt = <1225000>;
+		regulator-max-microvolt = <1225000>;
+	};
+
+	l2 {
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+	};
+
+	l4 {
+		regulator-min-microvolt = <2050000>;
+		regulator-max-microvolt = <2050000>;
+	};
+
+	l5 {
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	l6 {
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	l7 {
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	l8 {
+		regulator-min-microvolt = <2850000>;
+		regulator-max-microvolt = <2900000>;
+	};
+
+	l9 {
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	l10 {
+		regulator-min-microvolt = <2700000>;
+		regulator-max-microvolt = <2800000>;
+	};
+
+	l11 {
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <2950000>;
+		regulator-allow-set-load;
+		regulator-system-load = <200000>;
+	};
+
+	l12 {
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <2950000>;
+	};
+
+	l13 {
+		regulator-min-microvolt = <3075000>;
+		regulator-max-microvolt = <3075000>;
+	};
+
+	l14 {
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	l15 {
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	l16 {
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	l17 {
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+	};
+
+	l18 {
+		regulator-min-microvolt = <2700000>;
+		regulator-max-microvolt = <2700000>;
+	};
+};
+
+&msmgpio {
+	gpio_keys_default: gpio-keys-default {
+		pins = "gpio107", "gpio109";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+};
diff --git a/dts/src/arm64/qcom/msm8916-samsung-serranove.dts b/dts/src/arm64/qcom/msm8916-samsung-serranove.dts
index a78f87a5bf..58dfbfff4c 100644
--- a/dts/src/arm64/qcom/msm8916-samsung-serranove.dts
+++ b/dts/src/arm64/qcom/msm8916-samsung-serranove.dts
@@ -23,6 +23,7 @@
 / {
 	model = "Samsung Galaxy S4 Mini Value Edition";
 	compatible = "samsung,serranove", "qcom,msm8916";
+	chassis-type = "handset";
 
 	aliases {
 		serial0 = &blsp1_uart2;
diff --git a/dts/src/arm64/qcom/msm8916.dtsi b/dts/src/arm64/qcom/msm8916.dtsi
index c1c42f26b6..41897eb373 100644
--- a/dts/src/arm64/qcom/msm8916.dtsi
+++ b/dts/src/arm64/qcom/msm8916.dtsi
@@ -19,8 +19,8 @@
 	#size-cells = <2>;
 
 	aliases {
-		sdhc1 = &sdhc_1; /* SDC1 eMMC slot */
-		sdhc2 = &sdhc_2; /* SDC2 SD card slot */
+		mmc0 = &sdhc_1; /* SDC1 eMMC slot */
+		mmc1 = &sdhc_2; /* SDC2 SD card slot */
 	};
 
 	chosen { };
@@ -453,6 +453,11 @@
 			reg = <0x00060000 0x8000>;
 		};
 
+		sram@290000 {
+			compatible = "qcom,msm8916-rpm-stats";
+			reg = <0x00290000 0x10000>;
+		};
+
 		bimc: interconnect@400000 {
 			compatible = "qcom,msm8916-bimc";
 			reg = <0x00400000 0x62000>;
diff --git a/dts/src/arm64/qcom/msm8992-xiaomi-libra.dts b/dts/src/arm64/qcom/msm8992-xiaomi-libra.dts
index 69fcb6b039..84558ab5fe 100644
--- a/dts/src/arm64/qcom/msm8992-xiaomi-libra.dts
+++ b/dts/src/arm64/qcom/msm8992-xiaomi-libra.dts
@@ -42,7 +42,6 @@
 
 	gpio_keys {
 		compatible = "gpio-keys";
-		input-name = "gpio-keys";
 		#address-cells = <1>;
 		#size-cells = <0>;
 		autorepeat;
diff --git a/dts/src/arm64/qcom/msm8994-msft-lumia-octagon.dtsi b/dts/src/arm64/qcom/msm8994-msft-lumia-octagon.dtsi
index 3a3790a52a..cc038f9b64 100644
--- a/dts/src/arm64/qcom/msm8994-msft-lumia-octagon.dtsi
+++ b/dts/src/arm64/qcom/msm8994-msft-lumia-octagon.dtsi
@@ -62,7 +62,6 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		input-name = "gpio-keys";
 		autorepeat;
 
 		volupkey {
diff --git a/dts/src/arm64/qcom/msm8994-sony-xperia-kitakami.dtsi b/dts/src/arm64/qcom/msm8994-sony-xperia-kitakami.dtsi
index 48de66bf19..dde7ed159c 100644
--- a/dts/src/arm64/qcom/msm8994-sony-xperia-kitakami.dtsi
+++ b/dts/src/arm64/qcom/msm8994-sony-xperia-kitakami.dtsi
@@ -29,7 +29,6 @@
 
 	gpio_keys {
 		compatible = "gpio-keys";
-		input-name = "gpio-keys";
 		#address-cells = <1>;
 		#size-cells = <0>;
 		autorepeat;
@@ -223,7 +222,7 @@
 		vdd_l17_l29-supply = <&pmi8994_bby>;
 		vdd_l20_l21-supply = <&pmi8994_bby>;
 		vdd_l25-supply = <&pm8994_s3>;
-		vdd_lvs1_lvs2-supply = <&pm8994_s4>;
+		vdd_lvs1_2-supply = <&pm8994_s4>;
 
 		/* S1, S2, S6 and S12 are managed by RPMPD */
 
diff --git a/dts/src/arm64/qcom/msm8996-sony-xperia-tone.dtsi b/dts/src/arm64/qcom/msm8996-sony-xperia-tone.dtsi
index ff7f39d29d..3bb50cecd6 100644
--- a/dts/src/arm64/qcom/msm8996-sony-xperia-tone.dtsi
+++ b/dts/src/arm64/qcom/msm8996-sony-xperia-tone.dtsi
@@ -184,6 +184,7 @@
 &hsusb_phy1 {
 	status = "okay";
 
+	vdd-supply = <&pm8994_l28>;
 	vdda-pll-supply = <&pm8994_l12>;
 	vdda-phy-dpdm-supply = <&pm8994_l24>;
 };
@@ -589,34 +590,37 @@
 	};
 };
 
-&pmi8994_spmi_regulators {
+&pm8994_spmi_regulators {
 	qcom,saw-reg = <&saw3>;
 
-	vdd_gfx:
-	pmi8994_s2: s2 {
-		/* Pinned to a high value for now to avoid random crashes. */
-		regulator-min-microvolt = <1015000>;
-		regulator-max-microvolt = <1015000>;
-		regulator-name = "vdd_gfx";
-		regulator-always-on;
-	};
-
-	pmi8994_s9: s9 {
+	pm8994_s9: s9 {
 		qcom,saw-slave;
 	};
 
-	pmi8994_s10: s10 {
+	pm8994_s10: s10 {
 		qcom,saw-slave;
 	};
 
-	pmi8994_s11: s11 {
+	pm8994_s11: s11 {
 		qcom,saw-leader;
+		regulator-name = "vdd_apcc";
 		regulator-always-on;
 		regulator-min-microvolt = <470000>;
 		regulator-max-microvolt = <1140000>;
 	};
 };
 
+&pmi8994_spmi_regulators {
+	vdd_gfx:
+	pmi8994_s2: s2 {
+		/* Pinned to a high value for now to avoid random crashes. */
+		regulator-min-microvolt = <1015000>;
+		regulator-max-microvolt = <1015000>;
+		regulator-name = "vdd_gfx";
+		regulator-always-on;
+	};
+};
+
 &pmi8994_wled {
 	status = "okay";
 	default-brightness = <512>;
diff --git a/dts/src/arm64/qcom/msm8996-xiaomi-common.dtsi b/dts/src/arm64/qcom/msm8996-xiaomi-common.dtsi
index 01e573f0df..7a9fcbe9bb 100644
--- a/dts/src/arm64/qcom/msm8996-xiaomi-common.dtsi
+++ b/dts/src/arm64/qcom/msm8996-xiaomi-common.dtsi
@@ -207,8 +207,8 @@
 	status = "okay";
 	label = "TYPEC_I2C";
 
-	typec: tusb320@47 {
-		compatible = "ti,tusb320";
+	typec: tusb320l@47 {
+		compatible = "ti,tusb320l";
 		reg = <0x47>;
 		interrupt-parent = <&tlmm>;
 		interrupts = <63 IRQ_TYPE_EDGE_RISING>;
diff --git a/dts/src/arm64/qcom/msm8996-xiaomi-scorpio.dts b/dts/src/arm64/qcom/msm8996-xiaomi-scorpio.dts
index e5b8402b1e..27a45ddbb5 100644
--- a/dts/src/arm64/qcom/msm8996-xiaomi-scorpio.dts
+++ b/dts/src/arm64/qcom/msm8996-xiaomi-scorpio.dts
@@ -60,6 +60,20 @@
 };
 
 &blsp2_i2c6 {
+	touchkey: touchkey@28 {
+		compatible = "cypress,sf3155";
+		reg = <0x28>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <77 IRQ_TYPE_EDGE_FALLING>;
+		avdd-supply = <&vreg_l6a_1p8>;
+		vdd-supply = <&vdd_3v2_tp>;
+		linux,keycodes = <KEY_BACK KEY_MENU>;
+
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&touchkey_default>;
+		pinctrl-1 = <&touchkey_sleep>;
+	};
+
 	touchscreen: atmel-mxt-ts@4a {
 		compatible = "atmel,maxtouch";
 		reg = <0x4a>;
@@ -416,6 +430,20 @@
 		"RFFE1_DATA",		/* GPIO_148 */
 		"RFFE1_CLK";		/* GPIO_149 */
 
+	touchkey_default: touchkey_default {
+		pins = "gpio77";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-pull-up;
+	};
+
+	touchkey_sleep: touchkey_sleep {
+		pins = "gpio77";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
 	touchscreen_default: touchscreen_default {
 		pins = "gpio75", "gpio125";
 		function = "gpio";
diff --git a/dts/src/arm64/qcom/msm8996.dtsi b/dts/src/arm64/qcom/msm8996.dtsi
index bccc2d0b35..91bc974aeb 100644
--- a/dts/src/arm64/qcom/msm8996.dtsi
+++ b/dts/src/arm64/qcom/msm8996.dtsi
@@ -962,7 +962,6 @@
 
 		gpu: gpu@b00000 {
 			compatible = "qcom,adreno-530.2", "qcom,adreno";
-			#stream-id-cells = <16>;
 
 			reg = <0x00b00000 0x3f000>;
 			reg-names = "kgsl_3d0_reg_memory";
@@ -987,9 +986,6 @@
 			nvmem-cells = <&speedbin_efuse>;
 			nvmem-cell-names = "speed_bin";
 
-			qcom,gpu-quirk-two-pass-use-wfi;
-			qcom,gpu-quirk-fault-detect-mask;
-
 			operating-points-v2 = <&gpu_opp_table>;
 
 			status = "disabled";
diff --git a/dts/src/arm64/qcom/msm8998-clamshell.dtsi b/dts/src/arm64/qcom/msm8998-clamshell.dtsi
index 3f60575a35..b3b352530d 100644
--- a/dts/src/arm64/qcom/msm8998-clamshell.dtsi
+++ b/dts/src/arm64/qcom/msm8998-clamshell.dtsi
@@ -102,6 +102,7 @@
 &qusb2phy {
 	status = "okay";
 
+	vdd-supply = <&vreg_l1a_0p875>;
 	vdda-pll-supply = <&vreg_l12a_1p8>;
 	vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
 };
diff --git a/dts/src/arm64/qcom/msm8998-fxtec-pro1.dts b/dts/src/arm64/qcom/msm8998-fxtec-pro1.dts
index 3d495ce3f4..dc5b9b274d 100644
--- a/dts/src/arm64/qcom/msm8998-fxtec-pro1.dts
+++ b/dts/src/arm64/qcom/msm8998-fxtec-pro1.dts
@@ -29,7 +29,6 @@
 
 	gpio-hall-sensors {
 		compatible = "gpio-keys";
-		input-name = "hall-sensors";
 		label = "Hall sensors";
 		pinctrl-names = "default";
 		pinctrl-0 = <&hall_sensor1_default>;
@@ -46,7 +45,6 @@
 
 	gpio-kb-extra-keys {
 		compatible = "gpio-keys";
-		input-name = "extra-kb-keys";
 		label = "Keyboard extra keys";
 		pinctrl-names = "default";
 		pinctrl-0 = <&gpio_kb_pins_extra>;
@@ -102,7 +100,6 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		input-name = "side-buttons";
 		label = "Side buttons";
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git a/dts/src/arm64/qcom/msm8998-oneplus-common.dtsi b/dts/src/arm64/qcom/msm8998-oneplus-common.dtsi
index 654188027f..9823d48a91 100644
--- a/dts/src/arm64/qcom/msm8998-oneplus-common.dtsi
+++ b/dts/src/arm64/qcom/msm8998-oneplus-common.dtsi
@@ -260,6 +260,7 @@
 &qusb2phy {
 	status = "okay";
 
+	vdd-supply = <&vreg_l1a_0p875>;
 	vdda-pll-supply = <&vreg_l12a_1p8>;
 	vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
 };
diff --git a/dts/src/arm64/qcom/msm8998-sony-xperia-yoshino.dtsi b/dts/src/arm64/qcom/msm8998-sony-xperia-yoshino.dtsi
index 91e3912821..47488a1aec 100644
--- a/dts/src/arm64/qcom/msm8998-sony-xperia-yoshino.dtsi
+++ b/dts/src/arm64/qcom/msm8998-sony-xperia-yoshino.dtsi
@@ -93,7 +93,6 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		input-name = "gpio-keys";
 		label = "Side buttons";
 		pinctrl-names = "default";
 		pinctrl-0 = <&vol_down_pin_a>, <&cam_focus_pin_a>,
@@ -126,7 +125,6 @@
 
 	gpio-hall-sensor {
 		compatible = "gpio-keys";
-		input-name = "hall-sensors";
 		label = "Hall sensors";
 		pinctrl-names = "default";
 		pinctrl-0 = <&hall_sensor0_default>;
diff --git a/dts/src/arm64/qcom/msm8998.dtsi b/dts/src/arm64/qcom/msm8998.dtsi
index 408f265e27..f273bc1ff6 100644
--- a/dts/src/arm64/qcom/msm8998.dtsi
+++ b/dts/src/arm64/qcom/msm8998.dtsi
@@ -1446,7 +1446,6 @@
 			iommus = <&adreno_smmu 0>;
 			operating-points-v2 = <&gpu_opp_table>;
 			power-domains = <&rpmpd MSM8998_VDDMX>;
-			#stream-id-cells = <16>;
 			status = "disabled";
 
 			gpu_opp_table: opp-table {
diff --git a/dts/src/arm64/qcom/pm660.dtsi b/dts/src/arm64/qcom/pm660.dtsi
index d0ef8a1675..c482663aad 100644
--- a/dts/src/arm64/qcom/pm660.dtsi
+++ b/dts/src/arm64/qcom/pm660.dtsi
@@ -54,14 +54,24 @@
 			mode-bootloader = <0x2>;
 			mode-recovery = <0x1>;
 
-			pwrkey {
+			pon_pwrkey: pwrkey {
 				compatible = "qcom,pm8941-pwrkey";
 				interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
 				debounce = <15625>;
 				bias-pull-up;
 				linux,code = <KEY_POWER>;
+
+				status = "disabled";
 			};
 
+			pon_resin: resin {
+				compatible = "qcom,pm8941-resin";
+				interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
+				debounce = <15625>;
+				bias-pull-up;
+
+				status = "disabled";
+			};
 		};
 
 		pm660_temp: temp-alarm@2400 {
diff --git a/dts/src/arm64/qcom/pm8998.dtsi b/dts/src/arm64/qcom/pm8998.dtsi
index 6f5bb6b37e..d09f2954b6 100644
--- a/dts/src/arm64/qcom/pm8998.dtsi
+++ b/dts/src/arm64/qcom/pm8998.dtsi
@@ -84,6 +84,16 @@
 			};
 		};
 
+		pm8998_adc_tm: adc-tm@3400 {
+			compatible = "qcom,spmi-adc-tm-hc";
+			reg = <0x3400>;
+			interrupts = <0x0 0x34 0x0 IRQ_TYPE_EDGE_RISING>;
+			#thermal-sensor-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		rtc@6000 {
 			compatible = "qcom,pm8941-rtc";
 			reg = <0x6000>, <0x6100>;
diff --git a/dts/src/arm64/qcom/pmk8350.dtsi b/dts/src/arm64/qcom/pmk8350.dtsi
index 769f972680..0f94c46a14 100644
--- a/dts/src/arm64/qcom/pmk8350.dtsi
+++ b/dts/src/arm64/qcom/pmk8350.dtsi
@@ -19,16 +19,17 @@
 			compatible = "qcom,pm8998-pon";
 			reg = <0x1300>;
 
-			pwrkey {
+			pon_pwrkey: pwrkey {
 				compatible = "qcom,pmk8350-pwrkey";
 				interrupts = <0x0 0x13 0x7 IRQ_TYPE_EDGE_BOTH>;
 				linux,code = <KEY_POWER>;
+				status = "disabled";
 			};
 
-			resin {
+			pon_resin: resin {
 				compatible = "qcom,pmk8350-resin";
 				interrupts = <0x0 0x13 0x6 IRQ_TYPE_EDGE_BOTH>;
-				linux,code = <KEY_VOLUMEDOWN>;
+				status = "disabled";
 			};
 		};
 
diff --git a/dts/src/arm64/qcom/sc7180-trogdor-homestar-r2.dts b/dts/src/arm64/qcom/sc7180-trogdor-homestar-r2.dts
index db6c2da67c..70032983fb 100644
--- a/dts/src/arm64/qcom/sc7180-trogdor-homestar-r2.dts
+++ b/dts/src/arm64/qcom/sc7180-trogdor-homestar-r2.dts
@@ -7,6 +7,8 @@
 
 /dts-v1/;
 
+#include "sc7180.dtsi"
+#include "sc7180-trogdor-ti-sn65dsi86.dtsi"
 #include "sc7180-trogdor-homestar.dtsi"
 
 / {
diff --git a/dts/src/arm64/qcom/sc7180-trogdor-homestar-r3.dts b/dts/src/arm64/qcom/sc7180-trogdor-homestar-r3.dts
index 3fd8aa5bb7..e92e2e9e48 100644
--- a/dts/src/arm64/qcom/sc7180-trogdor-homestar-r3.dts
+++ b/dts/src/arm64/qcom/sc7180-trogdor-homestar-r3.dts
@@ -7,9 +7,11 @@
 
 /dts-v1/;
 
+#include "sc7180.dtsi"
+#include "sc7180-trogdor-ti-sn65dsi86.dtsi"
 #include "sc7180-trogdor-homestar.dtsi"
 
 / {
-	model = "Google Homestar (rev3+)";
-	compatible = "google,homestar", "qcom,sc7180";
+	model = "Google Homestar (rev3)";
+	compatible = "google,homestar-rev3", "qcom,sc7180";
 };
diff --git a/dts/src/arm64/qcom/sc7180-trogdor-homestar-r4.dts b/dts/src/arm64/qcom/sc7180-trogdor-homestar-r4.dts
new file mode 100644
index 0000000000..0de0c97f57
--- /dev/null
+++ b/dts/src/arm64/qcom/sc7180-trogdor-homestar-r4.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Homestar board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180.dtsi"
+#include "sc7180-trogdor-parade-ps8640.dtsi"
+#include "sc7180-trogdor-homestar.dtsi"
+
+/ {
+	model = "Google Homestar (rev4+)";
+	compatible = "google,homestar", "qcom,sc7180";
+};
+
+&pp3300_brij_ps8640 {
+	regulator-enable-ramp-delay = <4000>;
+};
diff --git a/dts/src/arm64/qcom/sc7180-trogdor-homestar.dtsi b/dts/src/arm64/qcom/sc7180-trogdor-homestar.dtsi
index 4ab890b2a1..f32369af13 100644
--- a/dts/src/arm64/qcom/sc7180-trogdor-homestar.dtsi
+++ b/dts/src/arm64/qcom/sc7180-trogdor-homestar.dtsi
@@ -5,13 +5,10 @@
  * Copyright 2021 Google LLC.
  */
 
-#include "sc7180.dtsi"
-
 ap_ec_spi: &spi6 {};
 ap_h1_spi: &spi0 {};
 
 #include "sc7180-trogdor.dtsi"
-#include "sc7180-trogdor-ti-sn65dsi86.dtsi"
 
 / {
 	/* BOARD-SPECIFIC TOP LEVEL NODES */
diff --git a/dts/src/arm64/qcom/sc7180-trogdor-lazor-limozeen-nots-r4.dts b/dts/src/arm64/qcom/sc7180-trogdor-lazor-limozeen-nots-r4.dts
index 6ebde08285..850776c532 100644
--- a/dts/src/arm64/qcom/sc7180-trogdor-lazor-limozeen-nots-r4.dts
+++ b/dts/src/arm64/qcom/sc7180-trogdor-lazor-limozeen-nots-r4.dts
@@ -5,7 +5,7 @@
  * Copyright 2020 Google LLC.
  */
 
-#include "sc7180-trogdor-lazor-limozeen-nots.dts"
+#include "sc7180-trogdor-lazor-limozeen-nots-r5.dts"
 
 / {
 	model = "Google Lazor Limozeen without Touchscreen (rev4)";
diff --git a/dts/src/arm64/qcom/sc7180-trogdor-lazor-limozeen-nots-r5.dts b/dts/src/arm64/qcom/sc7180-trogdor-lazor-limozeen-nots-r5.dts
new file mode 100644
index 0000000000..f360ff2722
--- /dev/null
+++ b/dts/src/arm64/qcom/sc7180-trogdor-lazor-limozeen-nots-r5.dts
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Lazor Limozeen board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180.dtsi"
+#include "sc7180-trogdor-ti-sn65dsi86.dtsi"
+#include "sc7180-trogdor-lazor.dtsi"
+#include "sc7180-trogdor-lte-sku.dtsi"
+
+/ {
+	model = "Google Lazor Limozeen without Touchscreen (rev5 - rev8)";
+	/* No sku5 post-rev5 */
+	compatible = "google,lazor-rev5-sku5", "google,lazor-rev5-sku6",
+		"google,lazor-rev6-sku6", "google,lazor-rev7-sku6",
+		"google,lazor-rev8-sku6", "qcom,sc7180";
+};
+
+/delete-node/&ap_ts;
+
+&panel {
+	compatible = "innolux,n116bca-ea1", "innolux,n116bge";
+};
+
+&sdhc_2 {
+	status = "okay";
+};
diff --git a/dts/src/arm64/qcom/sc7180-trogdor-lazor-limozeen-nots.dts b/dts/src/arm64/qcom/sc7180-trogdor-lazor-limozeen-nots-r9.dts
index 0456c7e05d..4e35aec6a1 100644
--- a/dts/src/arm64/qcom/sc7180-trogdor-lazor-limozeen-nots.dts
+++ b/dts/src/arm64/qcom/sc7180-trogdor-lazor-limozeen-nots-r9.dts
@@ -2,17 +2,19 @@
 /*
  * Google Lazor Limozeen board device tree source
  *
- * Copyright 2020 Google LLC.
+ * Copyright 2021 Google LLC.
  */
 
 /dts-v1/;
 
+#include "sc7180.dtsi"
+#include "sc7180-trogdor-parade-ps8640.dtsi"
 #include "sc7180-trogdor-lazor.dtsi"
 #include "sc7180-trogdor-lte-sku.dtsi"
 
 / {
-	model = "Google Lazor Limozeen without Touchscreen";
-	compatible = "google,lazor-sku6", "google,lazor-sku5", "qcom,sc7180";
+	model = "Google Lazor Limozeen without Touchscreen (rev9+)";
+	compatible = "google,lazor-sku6", "qcom,sc7180";
 };
 
 /delete-node/&ap_ts;
diff --git a/dts/src/arm64/qcom/sc7180-trogdor-lazor-limozeen-r4.dts b/dts/src/arm64/qcom/sc7180-trogdor-lazor-limozeen-r4.dts
new file mode 100644
index 0000000000..42b4bbcc76
--- /dev/null
+++ b/dts/src/arm64/qcom/sc7180-trogdor-lazor-limozeen-r4.dts
@@ -0,0 +1,46 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Lazor Limozeen board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180.dtsi"
+#include "sc7180-trogdor-ti-sn65dsi86.dtsi"
+#include "sc7180-trogdor-lazor.dtsi"
+#include "sc7180-trogdor-lte-sku.dtsi"
+
+/ {
+	model = "Google Lazor Limozeen (rev4 - rev8)";
+	compatible = "google,lazor-rev4-sku4", "google,lazor-rev5-sku4",
+		"google,lazor-rev6-sku4", "google,lazor-rev7-sku4",
+		"google,lazor-rev8-sku4", "qcom,sc7180";
+};
+
+/delete-node/&ap_ts;
+
+&ap_ts_pen_1v8 {
+	ap_ts: touchscreen@10 {
+		compatible = "elan,ekth3500";
+		reg = <0x10>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_int_l>, <&ts_reset_l>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+
+		vcc33-supply = <&pp3300_ts>;
+
+		reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&panel {
+	compatible = "auo,b116xa01";
+};
+
+&sdhc_2 {
+	status = "okay";
+};
diff --git a/dts/src/arm64/qcom/sc7180-trogdor-lazor-limozeen.dts b/dts/src/arm64/qcom/sc7180-trogdor-lazor-limozeen-r9.dts
index e6ad6dae4e..dc47842bc6 100644
--- a/dts/src/arm64/qcom/sc7180-trogdor-lazor-limozeen.dts
+++ b/dts/src/arm64/qcom/sc7180-trogdor-lazor-limozeen-r9.dts
@@ -2,16 +2,18 @@
 /*
  * Google Lazor Limozeen board device tree source
  *
- * Copyright 2020 Google LLC.
+ * Copyright 2021 Google LLC.
  */
 
 /dts-v1/;
 
+#include "sc7180.dtsi"
+#include "sc7180-trogdor-parade-ps8640.dtsi"
 #include "sc7180-trogdor-lazor.dtsi"
 #include "sc7180-trogdor-lte-sku.dtsi"
 
 / {
-	model = "Google Lazor Limozeen";
+	model = "Google Lazor Limozeen (rev9+)";
 	compatible = "google,lazor-sku4", "qcom,sc7180";
 };
 
diff --git a/dts/src/arm64/qcom/sc7180-trogdor-lazor-r0.dts b/dts/src/arm64/qcom/sc7180-trogdor-lazor-r0.dts
index 30e3e769d2..b142006478 100644
--- a/dts/src/arm64/qcom/sc7180-trogdor-lazor-r0.dts
+++ b/dts/src/arm64/qcom/sc7180-trogdor-lazor-r0.dts
@@ -7,6 +7,8 @@
 
 /dts-v1/;
 
+#include "sc7180.dtsi"
+#include "sc7180-trogdor-ti-sn65dsi86.dtsi"
 #include "sc7180-trogdor-lazor.dtsi"
 
 / {
diff --git a/dts/src/arm64/qcom/sc7180-trogdor-lazor-r1.dts b/dts/src/arm64/qcom/sc7180-trogdor-lazor-r1.dts
index c2ef06367b..59740799fa 100644
--- a/dts/src/arm64/qcom/sc7180-trogdor-lazor-r1.dts
+++ b/dts/src/arm64/qcom/sc7180-trogdor-lazor-r1.dts
@@ -7,6 +7,8 @@
 
 /dts-v1/;
 
+#include "sc7180.dtsi"
+#include "sc7180-trogdor-ti-sn65dsi86.dtsi"
 #include "sc7180-trogdor-lazor.dtsi"
 
 / {
diff --git a/dts/src/arm64/qcom/sc7180-trogdor-lazor-r3-kb.dts b/dts/src/arm64/qcom/sc7180-trogdor-lazor-r3-kb.dts
index dcb41afdc8..18ef9da719 100644
--- a/dts/src/arm64/qcom/sc7180-trogdor-lazor-r3-kb.dts
+++ b/dts/src/arm64/qcom/sc7180-trogdor-lazor-r3-kb.dts
@@ -7,12 +7,17 @@
 
 /dts-v1/;
 
+#include "sc7180.dtsi"
+#include "sc7180-trogdor-ti-sn65dsi86.dtsi"
 #include "sc7180-trogdor-lazor.dtsi"
 #include "sc7180-lite.dtsi"
 
 / {
-	model = "Google Lazor (rev3+) with KB Backlight";
-	compatible = "google,lazor-sku2", "qcom,sc7180";
+	model = "Google Lazor (rev3 - 8) with KB Backlight";
+	compatible = "google,lazor-rev3-sku2", "google,lazor-rev4-sku2",
+		"google,lazor-rev5-sku2", "google,lazor-rev6-sku2",
+		"google,lazor-rev7-sku2", "google,lazor-rev8-sku2",
+		"qcom,sc7180";
 };
 
 &keyboard_backlight {
diff --git a/dts/src/arm64/qcom/sc7180-trogdor-lazor-r3-lte.dts b/dts/src/arm64/qcom/sc7180-trogdor-lazor-r3-lte.dts
index be44900602..c5c9feff41 100644
--- a/dts/src/arm64/qcom/sc7180-trogdor-lazor-r3-lte.dts
+++ b/dts/src/arm64/qcom/sc7180-trogdor-lazor-r3-lte.dts
@@ -7,12 +7,17 @@
 
 /dts-v1/;
 
+#include "sc7180.dtsi"
+#include "sc7180-trogdor-ti-sn65dsi86.dtsi"
 #include "sc7180-trogdor-lazor.dtsi"
 #include "sc7180-trogdor-lte-sku.dtsi"
 
 / {
-	model = "Google Lazor (rev3+) with LTE";
-	compatible = "google,lazor-sku0", "qcom,sc7180";
+	model = "Google Lazor (rev3 - 8) with LTE";
+	compatible = "google,lazor-rev3-sku0", "google,lazor-rev4-sku0",
+		"google,lazor-rev5-sku0", "google,lazor-rev6-sku0",
+		"google,lazor-rev7-sku0", "google,lazor-rev8-sku0",
+		"qcom,sc7180";
 };
 
 &ap_sar_sensor {
diff --git a/dts/src/arm64/qcom/sc7180-trogdor-lazor-r3.dts b/dts/src/arm64/qcom/sc7180-trogdor-lazor-r3.dts
index b474df47cd..7adcedbf08 100644
--- a/dts/src/arm64/qcom/sc7180-trogdor-lazor-r3.dts
+++ b/dts/src/arm64/qcom/sc7180-trogdor-lazor-r3.dts
@@ -7,10 +7,14 @@
 
 /dts-v1/;
 
+#include "sc7180.dtsi"
+#include "sc7180-trogdor-ti-sn65dsi86.dtsi"
 #include "sc7180-trogdor-lazor.dtsi"
 #include "sc7180-lite.dtsi"
 
 / {
-	model = "Google Lazor (rev3+)";
-	compatible = "google,lazor", "qcom,sc7180";
+	model = "Google Lazor (rev3 - 8)";
+	compatible = "google,lazor-rev3", "google,lazor-rev4",
+		"google,lazor-rev5", "google,lazor-rev6", "google,lazor-rev7",
+		"google,lazor-rev8", "qcom,sc7180";
 };
diff --git a/dts/src/arm64/qcom/sc7180-trogdor-lazor-r9-kb.dts b/dts/src/arm64/qcom/sc7180-trogdor-lazor-r9-kb.dts
new file mode 100644
index 0000000000..7f5c015e1e
--- /dev/null
+++ b/dts/src/arm64/qcom/sc7180-trogdor-lazor-r9-kb.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Lazor board device tree source
+ *
+ * Copyright 2020 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180.dtsi"
+#include "sc7180-trogdor-parade-ps8640.dtsi"
+#include "sc7180-trogdor-lazor.dtsi"
+#include "sc7180-lite.dtsi"
+
+/ {
+	model = "Google Lazor (rev9+) with KB Backlight";
+	compatible = "google,lazor-sku2", "qcom,sc7180";
+};
+
+&keyboard_backlight {
+	status = "okay";
+};
diff --git a/dts/src/arm64/qcom/sc7180-trogdor-lazor-r9-lte.dts b/dts/src/arm64/qcom/sc7180-trogdor-lazor-r9-lte.dts
new file mode 100644
index 0000000000..344b57c035
--- /dev/null
+++ b/dts/src/arm64/qcom/sc7180-trogdor-lazor-r9-lte.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Lazor board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180.dtsi"
+#include "sc7180-trogdor-parade-ps8640.dtsi"
+#include "sc7180-trogdor-lazor.dtsi"
+#include "sc7180-trogdor-lte-sku.dtsi"
+
+/ {
+	model = "Google Lazor (rev9+) with LTE";
+	compatible = "google,lazor-sku0", "qcom,sc7180";
+};
+
+&ap_sar_sensor {
+	status = "okay";
+};
+
+&ap_sar_sensor_i2c {
+	status = "okay";
+};
+
+&keyboard_backlight {
+	status = "okay";
+};
diff --git a/dts/src/arm64/qcom/sc7180-trogdor-lazor-r9.dts b/dts/src/arm64/qcom/sc7180-trogdor-lazor-r9.dts
new file mode 100644
index 0000000000..83f6a4eb5a
--- /dev/null
+++ b/dts/src/arm64/qcom/sc7180-trogdor-lazor-r9.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Lazor board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180.dtsi"
+#include "sc7180-trogdor-parade-ps8640.dtsi"
+#include "sc7180-trogdor-lazor.dtsi"
+#include "sc7180-lite.dtsi"
+
+/ {
+	model = "Google Lazor (rev9+)";
+	compatible = "google,lazor", "qcom,sc7180";
+};
diff --git a/dts/src/arm64/qcom/sc7180-trogdor-lazor.dtsi b/dts/src/arm64/qcom/sc7180-trogdor-lazor.dtsi
index 8b79fbb757..69666f9217 100644
--- a/dts/src/arm64/qcom/sc7180-trogdor-lazor.dtsi
+++ b/dts/src/arm64/qcom/sc7180-trogdor-lazor.dtsi
@@ -5,13 +5,10 @@
  * Copyright 2020 Google LLC.
  */
 
-#include "sc7180.dtsi"
-
 ap_ec_spi: &spi6 {};
 ap_h1_spi: &spi0 {};
 
 #include "sc7180-trogdor.dtsi"
-#include "sc7180-trogdor-ti-sn65dsi86.dtsi"
 
 &ap_sar_sensor {
 	semtech,cs0-ground;
diff --git a/dts/src/arm64/qcom/sc7180-trogdor-parade-ps8640.dtsi b/dts/src/arm64/qcom/sc7180-trogdor-parade-ps8640.dtsi
index a3d69540d4..6a84fba178 100644
--- a/dts/src/arm64/qcom/sc7180-trogdor-parade-ps8640.dtsi
+++ b/dts/src/arm64/qcom/sc7180-trogdor-parade-ps8640.dtsi
@@ -5,6 +5,8 @@
  * Copyright 2021 Google LLC.
  */
 
+#include <dt-bindings/gpio/gpio.h>
+
 / {
 	pp3300_brij_ps8640: pp3300-brij-ps8640 {
 		compatible = "regulator-fixed";
diff --git a/dts/src/arm64/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi b/dts/src/arm64/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi
index 97d5e45abd..f869e6a343 100644
--- a/dts/src/arm64/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi
+++ b/dts/src/arm64/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi
@@ -5,9 +5,10 @@
  * Copyright 2021 Google LLC.
  */
 
+#include <dt-bindings/gpio/gpio.h>
+
 &dsi0_out {
 	remote-endpoint = <&sn65dsi86_in>;
-	data-lanes = <0 1 2 3>;
 };
 
 edp_brij_i2c: &i2c2 {
diff --git a/dts/src/arm64/qcom/sc7180-trogdor.dtsi b/dts/src/arm64/qcom/sc7180-trogdor.dtsi
index d4f4441179..bd5909ffb3 100644
--- a/dts/src/arm64/qcom/sc7180-trogdor.dtsi
+++ b/dts/src/arm64/qcom/sc7180-trogdor.dtsi
@@ -603,6 +603,10 @@
 	vdda-supply = <&vdda_mipi_dsi0_1p2>;
 };
 
+&dsi0_out {
+	data-lanes = <0 1 2 3>;
+};
+
 &dsi_phy {
 	status = "okay";
 	vdds-supply = <&vdda_mipi_dsi0_pll>;
diff --git a/dts/src/arm64/qcom/sc7180.dtsi b/dts/src/arm64/qcom/sc7180.dtsi
index faf8b807d0..2151cd8c8c 100644
--- a/dts/src/arm64/qcom/sc7180.dtsi
+++ b/dts/src/arm64/qcom/sc7180.dtsi
@@ -1952,7 +1952,6 @@
 
 		gpu: gpu@5000000 {
 			compatible = "qcom,adreno-618.0", "qcom,adreno";
-			#stream-id-cells = <16>;
 			reg = <0 0x05000000 0 0x40000>, <0 0x0509e000 0 0x1000>,
 				<0 0x05061000 0 0x800>;
 			reg-names = "kgsl_3d0_reg_memory", "cx_mem", "cx_dbgc";
diff --git a/dts/src/arm64/qcom/sc7280-crd.dts b/dts/src/arm64/qcom/sc7280-crd.dts
new file mode 100644
index 0000000000..cd2755ce53
--- /dev/null
+++ b/dts/src/arm64/qcom/sc7280-crd.dts
@@ -0,0 +1,93 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * sc7280 CRD board device tree source
+ *
+ * Copyright (c) 2021 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "sc7280-idp.dtsi"
+#include "sc7280-idp-ec-h1.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. sc7280 CRD platform";
+	compatible = "qcom,sc7280-crd", "google,hoglin", "qcom,sc7280";
+
+	aliases {
+		serial0 = &uart5;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+ap_tp_i2c: &i2c0 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	trackpad: trackpad@15 {
+		compatible = "hid-over-i2c";
+		reg = <0x15>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tp_int_odl>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+
+		post-power-on-delay-ms = <20>;
+		hid-descr-addr = <0x0001>;
+		vdd-supply = <&vreg_l18b_1p8>;
+
+		wakeup-source;
+	};
+};
+
+ap_ts_pen_1v8: &i2c13 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	ap_ts: touchscreen@5c {
+		compatible = "hid-over-i2c";
+		reg = <0x5c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_int_l>, <&ts_reset_l>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <55 IRQ_TYPE_LEVEL_LOW>;
+
+		post-power-on-delay-ms = <500>;
+		hid-descr-addr = <0x0000>;
+
+		vdd-supply = <&vreg_l19b_1p8>;
+	};
+};
+
+&nvme_3v3_regulator {
+	gpio = <&tlmm 51 GPIO_ACTIVE_HIGH>;
+};
+
+&nvme_pwren {
+	pins = "gpio51";
+};
+
+&tlmm {
+	tp_int_odl: tp-int-odl {
+		pins = "gpio7";
+		function = "gpio";
+		bias-disable;
+	};
+
+	ts_int_l: ts-int-l {
+		pins = "gpio55";
+		function = "gpio";
+		bias-pull-up;
+	};
+
+	ts_reset_l: ts-reset-l {
+		pins = "gpio54";
+		function = "gpio";
+		bias-disable;
+	};
+};
diff --git a/dts/src/arm64/qcom/sc7280-idp-ec-h1.dtsi b/dts/src/arm64/qcom/sc7280-idp-ec-h1.dtsi
new file mode 100644
index 0000000000..0896a61518
--- /dev/null
+++ b/dts/src/arm64/qcom/sc7280-idp-ec-h1.dtsi
@@ -0,0 +1,105 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * sc7280 EC/H1 over SPI (common between IDP2 and CRD)
+ *
+ * Copyright (c) 2021 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+ap_ec_spi: &spi10 {
+	status = "okay";
+
+	pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs_gpio_init_high>, <&qup_spi10_cs_gpio>;
+	cs-gpios = <&tlmm 43 GPIO_ACTIVE_LOW>;
+
+	cros_ec: ec@0 {
+		compatible = "google,cros-ec-spi";
+		reg = <0>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ap_ec_int_l>;
+		spi-max-frequency = <3000000>;
+
+		cros_ec_pwm: ec-pwm {
+			compatible = "google,cros-ec-pwm";
+			#pwm-cells = <1>;
+		};
+
+		i2c_tunnel: i2c-tunnel {
+			compatible = "google,cros-ec-i2c-tunnel";
+			google,remote-bus = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		typec {
+			compatible = "google,cros-ec-typec";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			usb_c0: connector@0 {
+				compatible = "usb-c-connector";
+				reg = <0>;
+				label = "left";
+				power-role = "dual";
+				data-role = "host";
+				try-power-role = "source";
+			};
+
+			usb_c1: connector@1 {
+				compatible = "usb-c-connector";
+				reg = <1>;
+				label = "right";
+				power-role = "dual";
+				data-role = "host";
+				try-power-role = "source";
+			};
+		};
+	};
+};
+
+#include <arm/cros-ec-keyboard.dtsi>
+#include <arm/cros-ec-sbs.dtsi>
+
+ap_h1_spi: &spi14 {
+	status = "okay";
+
+	pinctrl-0 = <&qup_spi14_data_clk>, <&qup_spi14_cs_gpio_init_high>, <&qup_spi14_cs_gpio>;
+	cs-gpios = <&tlmm 59 GPIO_ACTIVE_LOW>;
+
+	cr50: tpm@0 {
+		compatible = "google,cr50";
+		reg = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&h1_ap_int_odl>;
+		spi-max-frequency = <800000>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <104 IRQ_TYPE_EDGE_RISING>;
+	};
+};
+
+&tlmm {
+	ap_ec_int_l: ap-ec-int-l {
+		pins = "gpio18";
+		function = "gpio";
+		input-enable;
+		bias-pull-up;
+	};
+
+	h1_ap_int_odl: h1-ap-int-odl {
+		pins = "gpio104";
+		function = "gpio";
+		input-enable;
+		bias-pull-up;
+	};
+
+	qup_spi10_cs_gpio_init_high: qup-spi10-cs-gpio-init-high {
+		pins = "gpio43";
+		output-high;
+	};
+
+	qup_spi14_cs_gpio_init_high: qup-spi14-cs-gpio-init-high {
+		pins = "gpio59";
+		output-high;
+	};
+};
diff --git a/dts/src/arm64/qcom/sc7280-idp2.dts b/dts/src/arm64/qcom/sc7280-idp2.dts
index 3ae99697d8..0382c77065 100644
--- a/dts/src/arm64/qcom/sc7280-idp2.dts
+++ b/dts/src/arm64/qcom/sc7280-idp2.dts
@@ -8,6 +8,7 @@
 /dts-v1/;
 
 #include "sc7280-idp.dtsi"
+#include "sc7280-idp-ec-h1.dtsi"
 
 / {
 	model = "Qualcomm Technologies, Inc. sc7280 IDP SKU2 platform";
diff --git a/dts/src/arm64/qcom/sc7280.dtsi b/dts/src/arm64/qcom/sc7280.dtsi
index 365a2e04e2..937c2e0e93 100644
--- a/dts/src/arm64/qcom/sc7280.dtsi
+++ b/dts/src/arm64/qcom/sc7280.dtsi
@@ -129,6 +129,11 @@
 			no-map;
 		};
 
+		video_mem: memory@8b200000 {
+			reg = <0x0 0x8b200000 0x0 0x500000>;
+			no-map;
+		};
+
 		ipa_fw_mem: memory@8b700000 {
 			reg = <0 0x8b700000 0 0x10000>;
 			no-map;
@@ -574,9 +579,10 @@
 			reg = <0 0x00100000 0 0x1f0000>;
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
 				 <&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>,
-				 <0>, <0>, <0>, <0>, <0>, <0>;
+				 <0>, <&pcie1_lane 0>,
+				 <0>, <0>, <0>, <0>;
 			clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk",
-				      "pcie_0_pipe_clk", "pcie_1_pipe-clk",
+				      "pcie_0_pipe_clk", "pcie_1_pipe_clk",
 				      "ufs_phy_rx_symbol_0_clk", "ufs_phy_rx_symbol_1_clk",
 				      "ufs_phy_tx_symbol_0_clk",
 				      "usb3_phy_wrapper_gcc_usb30_pipe_clk";
@@ -1592,10 +1598,10 @@
 			interrupt-names = "msi";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 434 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 2 &intc 0 435 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 3 &intc 0 438 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 4 &intc 0 439 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 0 0 435 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 0 0 438 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 0 0 439 IRQ_TYPE_LEVEL_HIGH>;
 
 			clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,
 				 <&gcc GCC_PCIE_1_PIPE_CLK_SRC>,
@@ -1747,7 +1753,6 @@
 
 		gpu: gpu@3d00000 {
 			compatible = "qcom,adreno-635.0", "qcom,adreno";
-			#stream-id-cells = <16>;
 			reg = <0 0x03d00000 0 0x40000>,
 			      <0 0x03d9e000 0 0x1000>,
 			      <0 0x03d61000 0 0x800>;
@@ -2675,6 +2680,76 @@
 			};
 		};
 
+		venus: video-codec@aa00000 {
+			compatible = "qcom,sc7280-venus";
+			reg = <0 0x0aa00000 0 0xd0600>;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&videocc VIDEO_CC_MVSC_CORE_CLK>,
+				 <&videocc VIDEO_CC_MVSC_CTL_AXI_CLK>,
+				 <&videocc VIDEO_CC_VENUS_AHB_CLK>,
+				 <&videocc VIDEO_CC_MVS0_CORE_CLK>,
+				 <&videocc VIDEO_CC_MVS0_AXI_CLK>;
+			clock-names = "core", "bus", "iface",
+				      "vcodec_core", "vcodec_bus";
+
+			power-domains = <&videocc MVSC_GDSC>,
+					<&videocc MVS0_GDSC>,
+					<&rpmhpd SC7280_CX>;
+			power-domain-names = "venus", "vcodec0", "cx";
+			operating-points-v2 = <&venus_opp_table>;
+
+			interconnects = <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_VENUS_CFG 0>,
+					<&mmss_noc MASTER_VIDEO_P0 0 &mc_virt SLAVE_EBI1 0>;
+			interconnect-names = "cpu-cfg", "video-mem";
+
+			iommus = <&apps_smmu 0x2180 0x20>,
+				 <&apps_smmu 0x2184 0x20>;
+			memory-region = <&video_mem>;
+
+			video-decoder {
+				compatible = "venus-decoder";
+			};
+
+			video-encoder {
+				compatible = "venus-encoder";
+			};
+
+			video-firmware {
+				iommus = <&apps_smmu 0x21a2 0x0>;
+			};
+
+			venus_opp_table: venus-opp-table {
+				compatible = "operating-points-v2";
+
+				opp-133330000 {
+					opp-hz = /bits/ 64 <133330000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+				};
+
+				opp-240000000 {
+					opp-hz = /bits/ 64 <240000000>;
+					required-opps = <&rpmhpd_opp_svs>;
+				};
+
+				opp-335000000 {
+					opp-hz = /bits/ 64 <335000000>;
+					required-opps = <&rpmhpd_opp_svs_l1>;
+				};
+
+				opp-424000000 {
+					opp-hz = /bits/ 64 <424000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+				};
+
+				opp-460000048 {
+					opp-hz = /bits/ 64 <460000048>;
+					required-opps = <&rpmhpd_opp_turbo>;
+				};
+			};
+
+		};
+
 		videocc: clock-controller@aaf0000 {
 			compatible = "qcom,sc7280-videocc";
 			reg = <0 0xaaf0000 0 0x10000>;
diff --git a/dts/src/arm64/qcom/sdm630-sony-xperia-nile.dtsi b/dts/src/arm64/qcom/sdm630-sony-xperia-nile.dtsi
index 11d0a8c1cf..42af1fade4 100644
--- a/dts/src/arm64/qcom/sdm630-sony-xperia-nile.dtsi
+++ b/dts/src/arm64/qcom/sdm630-sony-xperia-nile.dtsi
@@ -90,7 +90,6 @@
 	gpio_keys {
 		status = "okay";
 		compatible = "gpio-keys";
-		input-name = "gpio-keys";
 		#address-cells = <1>;
 		#size-cells = <0>;
 
@@ -215,14 +214,14 @@
 	/* HCI Bluetooth */
 };
 
-&pon {
-	volup {
-		compatible = "qcom,pm8941-resin";
-		interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
-		debounce = <15625>;
-		bias-pull-up;
-		linux,code = <KEY_VOLUMEUP>;
-	};
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	status = "okay";
+
+	linux,code = <KEY_VOLUMEUP>;
 };
 
 &qusb2phy {
diff --git a/dts/src/arm64/qcom/sdm630.dtsi b/dts/src/arm64/qcom/sdm630.dtsi
index 3e0165bb61..9217c3a51f 100644
--- a/dts/src/arm64/qcom/sdm630.dtsi
+++ b/dts/src/arm64/qcom/sdm630.dtsi
@@ -19,6 +19,11 @@
 	#address-cells = <2>;
 	#size-cells = <2>;
 
+	aliases {
+		mmc1 = &sdhc_1;
+		mmc2 = &sdhc_2;
+	};
+
 	chosen { };
 
 	clocks {
@@ -1014,7 +1019,6 @@
 
 		adreno_gpu: gpu@5000000 {
 			compatible = "qcom,adreno-508.0", "qcom,adreno";
-			#stream-id-cells = <16>;
 
 			reg = <0x05000000 0x40000>;
 			reg-names = "kgsl_3d0_reg_memory";
diff --git a/dts/src/arm64/qcom/sdm636-sony-xperia-ganges-mermaid.dts b/dts/src/arm64/qcom/sdm636-sony-xperia-ganges-mermaid.dts
index bba1c2bce2..b96da53f2f 100644
--- a/dts/src/arm64/qcom/sdm636-sony-xperia-ganges-mermaid.dts
+++ b/dts/src/arm64/qcom/sdm636-sony-xperia-ganges-mermaid.dts
@@ -11,6 +11,7 @@
 / {
 	model = "Sony Xperia 10 Plus";
 	compatible = "sony,mermaid-row", "qcom,sdm636";
+	chassis-type = "handset";
 
 	/* SDM636 v1 */
 	qcom,msm-id = <345 0>;
diff --git a/dts/src/arm64/qcom/sdm660-xiaomi-lavender.dts b/dts/src/arm64/qcom/sdm660-xiaomi-lavender.dts
index 1edc53fd69..dcbaacf18f 100644
--- a/dts/src/arm64/qcom/sdm660-xiaomi-lavender.dts
+++ b/dts/src/arm64/qcom/sdm660-xiaomi-lavender.dts
@@ -1,11 +1,16 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
  * Copyright (c) 2020, Alexey Minnekhanov <alexey.min@gmail.com>
+ * Copyright (c) 2021, Dang Huynh <danct12@riseup.net>
  */
 
 /dts-v1/;
 
 #include "sdm660.dtsi"
+#include "pm660.dtsi"
+#include "pm660l.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/input/gpio-keys.h>
 
 / {
 	model = "Xiaomi Redmi Note 7";
@@ -17,7 +22,41 @@
 	};
 
 	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
 		stdout-path = "serial0:115200n8";
+
+		framebuffer0: framebuffer@9d400000 {
+			compatible = "simple-framebuffer";
+			reg = <0 0x9d400000 0 (1080 * 2340 * 4)>;
+			width = <1080>;
+			height = <2340>;
+			stride = <(1080 * 4)>;
+			format = "a8r8g8b8";
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		volup {
+			label = "Volume Up";
+			gpios = <&pm660l_gpios 7 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <15>;
+		};
 	};
 
 	reserved-memory {
@@ -33,6 +72,20 @@
 			ftrace-size = <0x0>;
 			pmsg-size = <0x20000>;
 		};
+
+		framebuffer_mem: memory@9d400000 {
+			reg = <0x0 0x9d400000 0x0 0x23ff000>;
+			no-map;
+		};
+	};
+
+	/*
+	 * Until we hook up type-c detection, we
+	 * have to stick with this. But it works.
+	 */
+	extcon_usb: extcon-usb {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpio = <&tlmm 58 GPIO_ACTIVE_HIGH>;
 	};
 };
 
@@ -40,6 +93,304 @@
 	status = "okay";
 };
 
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	status = "okay";
+
+	linux,code = <KEY_VOLUMEDOWN>;
+};
+
+&qusb2phy {
+	status = "okay";
+
+	vdd-supply = <&vreg_l1b_0p925>;
+	vdda-phy-dpdm-supply = <&vreg_l7b_3p125>;
+};
+
+&rpm_requests {
+	pm660l-regulators {
+		compatible = "qcom,rpm-pm660l-regulators";
+
+		vdd_s1-supply = <&vph_pwr>;
+		vdd_s2-supply = <&vph_pwr>;
+		vdd_s3_s4-supply = <&vph_pwr>;
+		vdd_s5-supply = <&vph_pwr>;
+		vdd_s6-supply = <&vph_pwr>;
+
+		vdd_l1_l9_l10-supply = <&vreg_s2b_1p05>;
+		vdd_l2-supply = <&vreg_bob>;
+		vdd_l3_l5_l7_l8-supply = <&vreg_bob>;
+		vdd_l4_l6-supply = <&vreg_bob>;
+		vdd_bob-supply = <&vph_pwr>;
+
+		vreg_s1b_1p125: s1 {
+			regulator-min-microvolt = <1125000>;
+			regulator-max-microvolt = <1125000>;
+			regulator-enable-ramp-delay = <200>;
+		};
+
+		vreg_s2b_1p05: s2 {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+			regulator-enable-ramp-delay = <200>;
+		};
+
+		/* LDOs */
+		vreg_l1b_0p925: l1 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <925000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-allow-set-load;
+		};
+
+		/* SDHCI 3.3V signal doesn't seem to be supported. */
+		vreg_l2b_2p95: l2 {
+			regulator-min-microvolt = <1648000>;
+			regulator-max-microvolt = <2696000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l3b_3p3: l3 {
+			regulator-min-microvolt = <1700000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l4b_2p95: l4 {
+			regulator-min-microvolt = <2944000>;
+			regulator-max-microvolt = <2952000>;
+			regulator-enable-ramp-delay = <250>;
+
+			regulator-min-microamp = <200>;
+			regulator-max-microamp = <600000>;
+			regulator-system-load = <570000>;
+			regulator-allow-set-load;
+		};
+
+		/*
+		 * Downstream specifies a range of 1721-3600mV,
+		 * but the only assigned consumers are SDHCI2 VMMC
+		 * and Coresight QPDI that both request pinned 2.95V.
+		 * Tighten the range to 1.8-3.328 (closest to 3.3) to
+		 * make the mmc driver happy.
+		 */
+		vreg_l5b_2p95: l5 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3328000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-allow-set-load;
+			regulator-system-load = <800000>;
+		};
+
+		vreg_l7b_3p125: l7 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <3125000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l8b_3p3: l8 {
+			regulator-min-microvolt = <3200000>;
+			regulator-max-microvolt = <3400000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_bob: bob {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3600000>;
+			regulator-enable-ramp-delay = <500>;
+		};
+	};
+
+	pm660-regulators {
+		compatible = "qcom,rpm-pm660-regulators";
+
+		vdd_s1-supply = <&vph_pwr>;
+		vdd_s2-supply = <&vph_pwr>;
+		vdd_s3-supply = <&vph_pwr>;
+		vdd_s4-supply = <&vph_pwr>;
+		vdd_s5-supply = <&vph_pwr>;
+		vdd_s6-supply = <&vph_pwr>;
+
+		vdd_l1_l6_l7-supply = <&vreg_s5a_1p35>;
+		vdd_l2_l3-supply = <&vreg_s2b_1p05>;
+		vdd_l5-supply = <&vreg_s2b_1p05>;
+		vdd_l8_l9_l10_l11_l12_l13_l14-supply = <&vreg_s4a_2p04>;
+		vdd_l15_l16_l17_l18_l19-supply = <&vreg_bob>;
+
+		/*
+		 * S1A (FTAPC0), S2A (FTAPC1), S3A (HFAPC1) are managed
+		 * by the Core Power Reduction hardened (CPRh) and the
+		 * Operating State Manager (OSM) HW automatically.
+		 */
+
+		vreg_s4a_2p04: s4 {
+			regulator-min-microvolt = <1805000>;
+			regulator-max-microvolt = <2040000>;
+			regulator-enable-ramp-delay = <200>;
+			regulator-always-on;
+		};
+
+		vreg_s5a_1p35: s5 {
+			regulator-min-microvolt = <1224000>;
+			regulator-max-microvolt = <1350000>;
+			regulator-enable-ramp-delay = <200>;
+		};
+
+		vreg_s6a_0p87: s6 {
+			regulator-min-microvolt = <504000>;
+			regulator-max-microvolt = <992000>;
+			regulator-enable-ramp-delay = <150>;
+		};
+
+		/* LDOs */
+		vreg_l1a_1p225: l1 {
+			regulator-min-microvolt = <1150000>;
+			regulator-max-microvolt = <1250000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l2a_1p0: l2 {
+			regulator-min-microvolt = <950000>;
+			regulator-max-microvolt = <1010000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l3a_1p0: l3 {
+			regulator-min-microvolt = <950000>;
+			regulator-max-microvolt = <1010000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l5a_0p848: l5 {
+			regulator-min-microvolt = <525000>;
+			regulator-max-microvolt = <950000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l6a_1p3: l6 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1370000>;
+			regulator-allow-set-load;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l7a_1p2: l7 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l8a_1p8: l8 {
+			regulator-min-microvolt = <1750000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-system-load = <325000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l9a_1p8: l9 {
+			regulator-min-microvolt = <1750000>;
+			regulator-max-microvolt = <1900000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l10a_1p8: l10 {
+			regulator-min-microvolt = <1780000>;
+			regulator-max-microvolt = <1950000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l11a_1p8: l11 {
+			regulator-min-microvolt = <1780000>;
+			regulator-max-microvolt = <1950000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l12a_1p8: l12 {
+			regulator-min-microvolt = <1780000>;
+			regulator-max-microvolt = <1950000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		/* This gives power to the LPDDR4: never turn it off! */
+		vreg_l13a_1p8: l13 {
+			regulator-min-microvolt = <1780000>;
+			regulator-max-microvolt = <1950000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vreg_l14a_1p8: l14 {
+			regulator-min-microvolt = <1710000>;
+			regulator-max-microvolt = <1900000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l15a_1p8: l15 {
+			regulator-min-microvolt = <1650000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l16a_2p7: l16 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-always-on;
+		};
+
+		vreg_l17a_1p8: l17 {
+			regulator-min-microvolt = <1648000>;
+			regulator-max-microvolt = <2952000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l19a_3p3: l19 {
+			regulator-min-microvolt = <3312000>;
+			regulator-max-microvolt = <3400000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-allow-set-load;
+		};
+	};
+};
+
+&sdhc_1 {
+	status = "okay";
+	supports-cqe;
+
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+
+	vmmc-supply = <&vreg_l4b_2p95>;
+	vqmmc-supply = <&vreg_l8a_1p8>;
+};
+
+&sdhc_2 {
+	status = "okay";
+
+	vmmc-supply = <&vreg_l5b_2p95>;
+	vqmmc-supply = <&vreg_l2b_2p95>;
+};
+
 &tlmm {
 	gpio-reserved-ranges = <8 4>;
 };
+
+&usb3 {
+	status = "okay";
+};
+
+&usb3_dwc3 {
+	dr_mode = "peripheral";
+	extcon = <&extcon_usb>;
+};
diff --git a/dts/src/arm64/qcom/sdm845-mtp.dts b/dts/src/arm64/qcom/sdm845-mtp.dts
index 5e6e8f4fb5..7713e8060c 100644
--- a/dts/src/arm64/qcom/sdm845-mtp.dts
+++ b/dts/src/arm64/qcom/sdm845-mtp.dts
@@ -9,6 +9,8 @@
 
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 #include "sdm845.dtsi"
+#include "pm8998.dtsi"
+#include "pmi8998.dtsi"
 
 / {
 	model = "Qualcomm Technologies, Inc. SDM845 MTP";
@@ -45,6 +47,68 @@
 
 		vin-supply = <&vph_pwr>;
 	};
+
+	thermal-zones {
+		xo_thermal: xo-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&pm8998_adc_tm 1>;
+
+			trips {
+				trip-point {
+					temperature = <125000>;
+					hysteresis = <10000>;
+					type = "passive";
+				};
+			};
+		};
+
+		msm_thermal: msm-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&pm8998_adc_tm 2>;
+
+			trips {
+				trip-point {
+					temperature = <125000>;
+					hysteresis = <10000>;
+					type = "passive";
+				};
+			};
+		};
+
+		pa_thermal: pa-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&pm8998_adc_tm 3>;
+
+			trips {
+				trip-point {
+					temperature = <125000>;
+					hysteresis = <10000>;
+					type = "passive";
+				};
+			};
+		};
+
+		quiet_thermal: quiet-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&pm8998_adc_tm 4>;
+
+			trips {
+				trip-point {
+					temperature = <125000>;
+					hysteresis = <10000>;
+					type = "passive";
+				};
+			};
+		};
+	};
 };
 
 &adsp_pas {
@@ -467,6 +531,82 @@
 	firmware-name = "qcom/sdm845/mba.mbn", "qcom/sdm845/modem.mbn";
 };
 
+&pm8998_adc {
+	adc-chan@4c {
+		reg = <ADC5_XO_THERM_100K_PU>;
+		label = "xo_therm";
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	adc-chan@4d {
+		reg = <ADC5_AMUX_THM1_100K_PU>;
+		label = "msm_therm";
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	adc-chan@4f {
+		reg = <ADC5_AMUX_THM3_100K_PU>;
+		label = "pa_therm1";
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	adc-chan@51 {
+		reg = <ADC5_AMUX_THM5_100K_PU>;
+		label = "quiet_therm";
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	adc-chan@83 {
+		reg = <ADC5_VPH_PWR>;
+		label = "vph_pwr";
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	adc-chan@85 {
+		reg = <ADC5_VCOIN>;
+		label = "vcoin";
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+};
+
+&pm8998_adc_tm {
+	status = "okay";
+
+	xo-thermistor@1 {
+		reg = <1>;
+		io-channels = <&pm8998_adc ADC5_XO_THERM_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	msm-thermistor@2 {
+		reg = <2>;
+		io-channels = <&pm8998_adc ADC5_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	pa-thermistor@3 {
+		reg = <3>;
+		io-channels = <&pm8998_adc ADC5_AMUX_THM3_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	quiet-thermistor@4 {
+		reg = <4>;
+		io-channels = <&pm8998_adc ADC5_AMUX_THM5_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+};
+
 &qupv3_id_1 {
 	status = "okay";
 };
diff --git a/dts/src/arm64/qcom/sdm845-oneplus-common.dtsi b/dts/src/arm64/qcom/sdm845-oneplus-common.dtsi
index 3e04aeb479..7f42e5315e 100644
--- a/dts/src/arm64/qcom/sdm845-oneplus-common.dtsi
+++ b/dts/src/arm64/qcom/sdm845-oneplus-common.dtsi
@@ -646,6 +646,7 @@
 
 &venus {
 	status = "okay";
+	firmware-name = "qcom/sdm845/oneplus6/venus.mbn";
 };
 
 &wifi {
diff --git a/dts/src/arm64/qcom/sdm845-oneplus-enchilada.dts b/dts/src/arm64/qcom/sdm845-oneplus-enchilada.dts
index 73493079d1..5936b47dee 100644
--- a/dts/src/arm64/qcom/sdm845-oneplus-enchilada.dts
+++ b/dts/src/arm64/qcom/sdm845-oneplus-enchilada.dts
@@ -11,6 +11,8 @@
 	model = "OnePlus 6";
 	compatible = "oneplus,enchilada", "qcom,sdm845";
 	chassis-type = "handset";
+	qcom,msm-id = <0x141 0x20001>;
+	qcom,board-id = <8 0 17819 22>;
 };
 
 &display_panel {
diff --git a/dts/src/arm64/qcom/sdm845-oneplus-fajita.dts b/dts/src/arm64/qcom/sdm845-oneplus-fajita.dts
index b63ebc48f6..78a0b99144 100644
--- a/dts/src/arm64/qcom/sdm845-oneplus-fajita.dts
+++ b/dts/src/arm64/qcom/sdm845-oneplus-fajita.dts
@@ -11,6 +11,8 @@
 	model = "OnePlus 6T";
 	compatible = "oneplus,fajita", "qcom,sdm845";
 	chassis-type = "handset";
+	qcom,msm-id = <0x141 0x20001>;
+	qcom,board-id = <8 0 18801 41>;
 };
 
 &display_panel {
diff --git a/dts/src/arm64/qcom/sdm845-sony-xperia-tama-akari.dts b/dts/src/arm64/qcom/sdm845-sony-xperia-tama-akari.dts
new file mode 100644
index 0000000000..34f84f1f1e
--- /dev/null
+++ b/dts/src/arm64/qcom/sdm845-sony-xperia-tama-akari.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+/dts-v1/;
+
+#include "sdm845-sony-xperia-tama.dtsi"
+
+/ {
+	model = "Sony Xperia XZ2";
+	compatible = "sony,akari-row", "qcom,sdm845";
+};
diff --git a/dts/src/arm64/qcom/sdm845-sony-xperia-tama-akatsuki.dts b/dts/src/arm64/qcom/sdm845-sony-xperia-tama-akatsuki.dts
new file mode 100644
index 0000000000..8a0d94e7f5
--- /dev/null
+++ b/dts/src/arm64/qcom/sdm845-sony-xperia-tama-akatsuki.dts
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+/dts-v1/;
+
+#include "sdm845-sony-xperia-tama.dtsi"
+
+/ {
+	model = "Sony Xperia XZ3";
+	compatible = "sony,akatsuki-row", "qcom,sdm845";
+};
+
+/* For the future: WLED + LAB/IBB/OLEDB are not used on Akatsuki */
+&vreg_l14a_1p8 {
+	regulator-min-microvolt = <1840000>;
+	regulator-max-microvolt = <1840000>;
+};
+
+&vreg_l22a_2p8 {
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <2700000>;
+};
+
+&vreg_l28a_2p8 {
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+};
diff --git a/dts/src/arm64/qcom/sdm845-sony-xperia-tama-apollo.dts b/dts/src/arm64/qcom/sdm845-sony-xperia-tama-apollo.dts
new file mode 100644
index 0000000000..c9e62c72f6
--- /dev/null
+++ b/dts/src/arm64/qcom/sdm845-sony-xperia-tama-apollo.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+/dts-v1/;
+
+#include "sdm845-sony-xperia-tama.dtsi"
+
+/ {
+	model = "Sony Xperia XZ2 Compact";
+	compatible = "sony,apollo-row", "qcom,sdm845";
+};
diff --git a/dts/src/arm64/qcom/sdm845-sony-xperia-tama.dtsi b/dts/src/arm64/qcom/sdm845-sony-xperia-tama.dtsi
new file mode 100644
index 0000000000..281fe6dea6
--- /dev/null
+++ b/dts/src/arm64/qcom/sdm845-sony-xperia-tama.dtsi
@@ -0,0 +1,438 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sdm845.dtsi"
+#include "pm8005.dtsi"
+#include "pm8998.dtsi"
+#include "pmi8998.dtsi"
+
+/ {
+	qcom,msm-id = <321 0x20001>; /* SDM845 v2.1 */
+	qcom,board-id = <8 0>;
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		/* Neither Camera Focus, nor Camera Shutter seem to work... */
+
+		vol-down {
+			label = "volume_down";
+			gpios = <&pm8998_gpio 5 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <15>;
+			gpio-key,wakeup;
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+	};
+
+	vreg_s4a_1p8: pm8998-smps4 {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_s4a_1p8";
+
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		vin-supply = <&vph_pwr>;
+	};
+
+	reserved-memory {
+		/* SONY was cool and didn't diverge from MTP this time, yay! */
+		cont_splash_mem: memory@9d400000 {
+			reg = <0x0 0x9d400000 0x0 0x2400000>;
+			no-map;
+		};
+
+		ramoops@ffc00000 {
+			compatible = "ramoops";
+			reg = <0x0 0xffc00000 0x0 0x100000>;
+			record-size = <0x10000>;
+			console-size = <0x60000>;
+			ftrace-size = <0x10000>;
+			pmsg-size = <0x20000>;
+			ecc-size = <16>;
+			no-map;
+		};
+	};
+};
+
+&apps_rsc {
+	pm8998-rpmh-regulators {
+		compatible = "qcom,pm8998-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+		vdd-s11-supply = <&vph_pwr>;
+		vdd-s12-supply = <&vph_pwr>;
+		vdd-s13-supply = <&vph_pwr>;
+		vdd-l1-l27-supply = <&vreg_s7a_0p9>;
+		vdd-l2-l8-l17-supply = <&vreg_s3a_1p3>;
+		vdd-l3-l11-supply = <&vreg_s7a_0p9>;
+		vdd-l4-l5-supply = <&vreg_s7a_0p9>;
+		vdd-l6-supply = <&vph_pwr>;
+		vdd-l7-l12-l14-l15-supply = <&vreg_s5a_1p9>;
+		vdd-l9-supply = <&vreg_s5a_1p9>;
+		vdd-l10-l23-l25-supply = <&src_vreg_bob>;
+		vdd-l13-l19-l21-supply = <&src_vreg_bob>;
+		vdd-l16-l28-supply = <&src_vreg_bob>;
+		vdd-l18-l22-supply = <&src_vreg_bob>;
+		vdd-l20-l24-supply = <&src_vreg_bob>;
+		vdd-l26-supply = <&vreg_s3a_1p3>;
+		vin-lvs-1-2-supply = <&vreg_s4a_1p8>;
+
+		vreg_s2a_1p1: smps2 {
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1100000>;
+		};
+
+		vreg_s3a_1p3: smps3 {
+			regulator-min-microvolt = <1352000>;
+			regulator-max-microvolt = <1352000>;
+		};
+
+		vreg_s5a_1p9: smps5 {
+			regulator-min-microvolt = <1904000>;
+			regulator-max-microvolt = <2040000>;
+		};
+
+		vreg_s7a_0p9: smps7 {
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <1028000>;
+		};
+
+		vreg_l1a_0p9: ldo1 {
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2a_1p2: ldo2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_l3a_1p0: ldo3 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5a_0p8: ldo5 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6a_1p8: ldo6 {
+			regulator-min-microvolt = <1856000>;
+			regulator-max-microvolt = <1856000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7a_1p8: ldo7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8a_1p2: ldo8 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1248000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9a_1p7: ldo9 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <2928000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10a_1p7: ldo10 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <2928000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11a_1p0: ldo11 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1048000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12a_1p8: ldo12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13a_1p8: ldo13 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14a_1p8: ldo14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15a_1p8: ldo15 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16a_2p7: ldo16 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2704000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17a_1p3: ldo17 {
+			regulator-min-microvolt = <1304000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l18a_2p7: ldo18 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l19a_2p7: ldo19 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+
+			/*
+			 * The driver *really* doesn't want this regualtor to exist,
+			 * saying that it could not get the current voltage (-ENOTRECOVERABLE)
+			 * even though it surely is used on these devices (as a voltage
+			 * source for camera autofocus)
+			 */
+			status = "disabled";
+		};
+
+		vreg_l20a_2p7: ldo20 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l21a_2p7: ldo21 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l22a_2p8: ldo22 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l23a_3p0: ldo23 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l24a_3p1: ldo24 {
+			regulator-min-microvolt = <3088000>;
+			regulator-max-microvolt = <3088000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l25a_3p0: ldo25 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l26a_1p2: ldo26 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l28a_2p8: ldo28 {
+			regulator-min-microvolt = <2856000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_lvs1a_1p8: lvs1 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_lvs2a_1p8: lvs2 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	pmi8998-rpmh-regulators {
+		compatible = "qcom,pmi8998-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		src_vreg_bob: bob {
+			regulator-min-microvolt = <3312000>;
+			regulator-max-microvolt = <3600000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	pm8005-rpmh-regulators {
+		compatible = "qcom,pm8005-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+
+		vreg_s3c_0p6: smps3 {
+			regulator-min-microvolt = <600000>;
+			regulator-max-microvolt = <600000>;
+		};
+	};
+};
+
+&gcc {
+	protected-clocks = <GCC_QSPI_CORE_CLK>,
+			<GCC_QSPI_CORE_CLK_SRC>,
+			<GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
+			<GCC_LPASS_Q6_AXI_CLK>,
+			<GCC_LPASS_SWAY_CLK>;
+};
+
+&i2c5 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	/* Synaptics touchscreen @ 2c, 3c */
+};
+
+&i2c10 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	/* Qcom SMB1355 @ 8, c */
+	/* NXP PN547 NFC @ 28 */
+	/* Renesas IDTP9221 Qi charger @ 61 */
+};
+
+&i2c14 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	/* SONY ToF sensor @ 52 */
+	/* AMS TCS3490 RGB+IR color sensor @ 72 */
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&sdhc_2 {
+	status = "okay";
+
+	vmmc-supply = <&vreg_l21a_2p7>;
+	vqmmc-supply = <&vreg_l13a_1p8>;
+	cd-gpios = <&tlmm 126 GPIO_ACTIVE_HIGH>;
+	pinctrl-0 = <&sdc2_default_state>;
+	pinctrl-names = "default";
+	bus-width = <4>;
+	no-sdio;
+	no-emmc;
+};
+
+&tlmm {
+	gpio-reserved-ranges = <0 4>, <81 4>;
+
+	sdc2_default_state: sdc2-default-state {
+		clk {
+			pins = "sdc2_clk";
+			drive-strength = <16>;
+			bias-disable;
+		};
+
+		cmd {
+			pins = "sdc2_cmd";
+			drive-strength = <10>;
+			bias-pull-up;
+		};
+
+		data {
+			pins = "sdc2_data";
+			drive-strength = <10>;
+			bias-pull-up;
+		};
+	};
+};
+
+&uart6 {
+	status = "okay";
+};
+
+&uart9 {
+	status = "okay";
+};
+
+/* BIG WARNING! DO NOT TOUCH UFS, YOUR DEVICE WILL DIE! */
+&ufs_mem_hc { status = "disabled"; };
+&ufs_mem_phy { status = "disabled"; };
+
+&usb_1 {
+	status = "okay";
+
+	qcom,select-utmi-as-pipe-clk;
+};
+
+&usb_1_dwc3 {
+	dr_mode = "peripheral";
+
+	maximum-speed = "high-speed";
+	phys = <&usb_1_hsphy>;
+	phy-names = "usb2-phy";
+};
+
+&usb_1_hsphy {
+	status = "okay";
+
+	vdd-supply = <&vreg_l1a_0p9>;
+	vdda-pll-supply = <&vreg_l12a_1p8>;
+	vdda-phy-dpdm-supply = <&vreg_l24a_3p1>;
+};
diff --git a/dts/src/arm64/qcom/sdm845-xiaomi-beryllium.dts b/dts/src/arm64/qcom/sdm845-xiaomi-beryllium.dts
index 580d4cc129..367389526b 100644
--- a/dts/src/arm64/qcom/sdm845-xiaomi-beryllium.dts
+++ b/dts/src/arm64/qcom/sdm845-xiaomi-beryllium.dts
@@ -514,6 +514,7 @@
 
 &venus {
 	status = "okay";
+	firmware-name = "qcom/sdm845/beryllium/venus.mbn";
 };
 
 &wcd9340{
diff --git a/dts/src/arm64/qcom/sdm845.dtsi b/dts/src/arm64/qcom/sdm845.dtsi
index 526087586b..cfdeaa81f1 100644
--- a/dts/src/arm64/qcom/sdm845.dtsi
+++ b/dts/src/arm64/qcom/sdm845.dtsi
@@ -1078,7 +1078,7 @@
 		};
 
 		qfprom@784000 {
-			compatible = "qcom,qfprom";
+			compatible = "qcom,sdm845-qfprom", "qcom,qfprom";
 			reg = <0 0x00784000 0 0x8ff>;
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -4415,7 +4415,6 @@
 
 		gpu: gpu@5000000 {
 			compatible = "qcom,adreno-630.2", "qcom,adreno";
-			#stream-id-cells = <16>;
 
 			reg = <0 0x5000000 0 0x40000>, <0 0x509e000 0 0x10>;
 			reg-names = "kgsl_3d0_reg_memory", "cx_mem";
diff --git a/dts/src/arm64/qcom/sdm850-lenovo-yoga-c630.dts b/dts/src/arm64/qcom/sdm850-lenovo-yoga-c630.dts
index d6b2ba4396..58845a1480 100644
--- a/dts/src/arm64/qcom/sdm850-lenovo-yoga-c630.dts
+++ b/dts/src/arm64/qcom/sdm850-lenovo-yoga-c630.dts
@@ -523,6 +523,10 @@
 	dai@1 {
 		reg = <1>;
 	};
+
+	dai@2 {
+		reg = <2>;
+	};
 };
 
 &sound {
@@ -535,6 +539,7 @@
 		"SpkrLeft IN", "SPK1 OUT",
 		"SpkrRight IN", "SPK2 OUT",
 		"MM_DL1",  "MultiMedia1 Playback",
+		"MM_DL3",  "MultiMedia3 Playback",
 		"MultiMedia2 Capture", "MM_UL2";
 
 	mm1-dai-link {
@@ -551,6 +556,13 @@
 		};
 	};
 
+	mm3-dai-link {
+		link-name = "MultiMedia3";
+		cpu {
+			sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA3>;
+		};
+	};
+
 	slim-dai-link {
 		link-name = "SLIM Playback";
 		cpu {
@@ -580,6 +592,21 @@
 			sound-dai = <&wcd9340 1>;
 		};
 	};
+
+	slim-wcd-dai-link {
+		link-name = "SLIM WCD Playback";
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_1_RX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+
+		codec {
+			sound-dai =  <&wcd9340 2>;
+		};
+	};
 };
 
 &tlmm {
@@ -744,6 +771,9 @@
 	vdd-tx-supply = <&vreg_s4a_1p8>;
 	vdd-rx-supply = <&vreg_s4a_1p8>;
 	vdd-io-supply = <&vreg_s4a_1p8>;
+	qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
+	qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
+	qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
 
 	swm: swm@c85 {
 		left_spkr: wsa8810-left{
diff --git a/dts/src/arm64/qcom/sm6125-sony-xperia-seine-pdx201.dts b/dts/src/arm64/qcom/sm6125-sony-xperia-seine-pdx201.dts
index 45eab0235d..871ccbba44 100644
--- a/dts/src/arm64/qcom/sm6125-sony-xperia-seine-pdx201.dts
+++ b/dts/src/arm64/qcom/sm6125-sony-xperia-seine-pdx201.dts
@@ -42,7 +42,6 @@
 	gpio-keys {
 		status = "okay";
 		compatible = "gpio-keys";
-		input-name = "gpio-keys";
 		#address-cells = <1>;
 		#size-cells = <0>;
 		autorepeat;
diff --git a/dts/src/arm64/qcom/sm6125.dtsi b/dts/src/arm64/qcom/sm6125.dtsi
index 51286ddbdb..49e6bca646 100644
--- a/dts/src/arm64/qcom/sm6125.dtsi
+++ b/dts/src/arm64/qcom/sm6125.dtsi
@@ -302,6 +302,56 @@
 				compatible = "qcom,rpmcc-sm6125", "qcom,rpmcc";
 				#clock-cells = <1>;
 			};
+
+			rpmpd: power-controller {
+				compatible = "qcom,sm6125-rpmpd";
+				#power-domain-cells = <1>;
+				operating-points-v2 = <&rpmpd_opp_table>;
+
+				rpmpd_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					rpmpd_opp_ret: opp1 {
+						opp-level = <RPM_SMD_LEVEL_RETENTION>;
+					};
+
+					rpmpd_opp_ret_plus: opp2 {
+						opp-level = <RPM_SMD_LEVEL_RETENTION_PLUS>;
+					};
+
+					rpmpd_opp_min_svs: opp3 {
+						opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
+					};
+
+					rpmpd_opp_low_svs: opp4 {
+						opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
+					};
+
+					rpmpd_opp_svs: opp5 {
+						opp-level = <RPM_SMD_LEVEL_SVS>;
+					};
+
+					rpmpd_opp_svs_plus: opp6 {
+						opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
+					};
+
+					rpmpd_opp_nom: opp7 {
+						opp-level = <RPM_SMD_LEVEL_NOM>;
+					};
+
+					rpmpd_opp_nom_plus: opp8 {
+						opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
+					};
+
+					rpmpd_opp_turbo: opp9 {
+						opp-level = <RPM_SMD_LEVEL_TURBO>;
+					};
+
+					rpmpd_opp_turbo_no_cpr: opp10 {
+						opp-level = <RPM_SMD_LEVEL_TURBO_NO_CPR>;
+					};
+				};
+			};
 		};
 	};
 
@@ -398,6 +448,9 @@
 				 <&gcc GCC_SDCC1_APPS_CLK>,
 				 <&xo_board>;
 			clock-names = "iface", "core", "xo";
+
+			power-domains = <&rpmpd 0>;
+
 			bus-width = <8>;
 			non-removable;
 			status = "disabled";
@@ -421,6 +474,8 @@
 			pinctrl-1 = <&sdc2_state_off>;
 			pinctrl-names = "default", "sleep";
 
+			power-domains = <&rpmpd 0>;
+
 			bus-width = <4>;
 			status = "disabled";
 		};
diff --git a/dts/src/arm64/qcom/sm6350.dtsi b/dts/src/arm64/qcom/sm6350.dtsi
index 973e18fe3b..d7c9edff19 100644
--- a/dts/src/arm64/qcom/sm6350.dtsi
+++ b/dts/src/arm64/qcom/sm6350.dtsi
@@ -361,6 +361,80 @@
 		hwlocks = <&tcsr_mutex 3>;
 	};
 
+	smp2p-adsp {
+		compatible = "qcom,smp2p";
+		qcom,smem = <443>, <429>;
+		interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_LPASS
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <2>;
+
+		smp2p_adsp_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_adsp_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-cdsp {
+		compatible = "qcom,smp2p";
+		qcom,smem = <94>, <432>;
+		interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_CDSP
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <5>;
+
+		smp2p_cdsp_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_cdsp_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-mpss {
+		compatible = "qcom,smp2p";
+		qcom,smem = <435>, <428>;
+
+		interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_MPSS
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <1>;
+
+		modem_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		modem_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
 	soc: soc@0 {
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -473,6 +547,211 @@
 			#hwlock-cells = <1>;
 		};
 
+		adsp: remoteproc@3000000 {
+			compatible = "qcom,sm6350-adsp-pas";
+			reg = <0 0x03000000 0 0x100>;
+
+			interrupts-extended = <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
+					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd SM6350_LCX>,
+					<&rpmhpd SM6350_LMX>;
+			power-domain-names = "lcx", "lmx";
+
+			memory-region = <&pil_adsp_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_adsp_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_LPASS
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "lpass";
+				qcom,remote-pid = <2>;
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "adsp";
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x1003 0x0>;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+						iommus = <&apps_smmu 0x1004 0x0>;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+						iommus = <&apps_smmu 0x1005 0x0>;
+						qcom,nsessions = <5>;
+					};
+				};
+			};
+		};
+
+		mpss: remoteproc@4080000 {
+			compatible = "qcom,sm6350-mpss-pas";
+			reg = <0x0 0x04080000 0x0 0x4040>;
+
+			interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready", "handover",
+					  "stop-ack", "shutdown-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd SM6350_CX>,
+					<&rpmhpd SM6350_MSS>;
+			power-domain-names = "cx", "mss";
+
+			memory-region = <&pil_modem_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&modem_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_MPSS
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+				label = "modem";
+				qcom,remote-pid = <1>;
+			};
+		};
+
+		cdsp: remoteproc@8300000 {
+			compatible = "qcom,sm6350-cdsp-pas";
+			reg = <0 0x08300000 0 0x10000>;
+
+			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>,
+					      <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd SM6350_CX>,
+					<&rpmhpd SM6350_MX>;
+			power-domain-names = "cx", "mx";
+
+			memory-region = <&pil_cdsp_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_cdsp_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_CDSP
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "cdsp";
+				qcom,remote-pid = <5>;
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "cdsp";
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@1 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <1>;
+						iommus = <&apps_smmu 0x1401 0x20>;
+					};
+
+					compute-cb@2 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <2>;
+						iommus = <&apps_smmu 0x1402 0x20>;
+					};
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x1403 0x20>;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+						iommus = <&apps_smmu 0x1404 0x20>;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+						iommus = <&apps_smmu 0x1405 0x20>;
+					};
+
+					compute-cb@6 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <6>;
+						iommus = <&apps_smmu 0x1406 0x20>;
+					};
+
+					compute-cb@7 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <7>;
+						iommus = <&apps_smmu 0x1407 0x20>;
+					};
+
+					compute-cb@8 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <8>;
+						iommus = <&apps_smmu 0x1408 0x20>;
+					};
+
+					/* note: secure cb9 in downstream */
+				};
+			};
+		};
+
 		sdhc_2: sdhci@8804000 {
 			compatible = "qcom,sm6350-sdhci", "qcom,sdhci-msm-v5";
 			reg = <0 0x08804000 0 0x1000>;
@@ -531,10 +810,10 @@
 			ranges;
 
 			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
+				 <&xo_board>,
 				 <&rpmhcc RPMH_QLINK_CLK>,
-				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
-				 <&xo_board>;
-			clock-names = "aux", "ref", "com_aux", "cfg_ahb";
+				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
+			clock-names = "aux", "cfg_ahb", "ref", "com_aux";
 
 			resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>,
 				 <&gcc GCC_USB3_PHY_PRIM_BCR>;
@@ -592,11 +871,12 @@
 				      "sleep";
 
 			interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
-					      <&pdc 14 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 17 IRQ_TYPE_LEVEL_HIGH>,
 					      <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
-					      <&pdc 17 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "hs_phy_irq", "dp_hs_phy_irq",
-					  "dm_hs_phy_irq", "ss_phy_irq";
+					      <&pdc 14 IRQ_TYPE_EDGE_BOTH>;
+
+			interrupt-names = "hs_phy_irq", "ss_phy_irq",
+					  "dm_hs_phy_irq", "dp_hs_phy_irq";
 
 			power-domains = <&gcc USB30_PRIM_GDSC>;
 
@@ -631,7 +911,7 @@
 			reg = <0 0x0c263000 0 0x1ff>, /* TM */
 			      <0 0x0c222000 0 0x8>; /* SROT */
 			#qcom,sensors = <16>;
-			interrupts = <&pdc 26 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&pdc 26 IRQ_TYPE_LEVEL_HIGH>,
 				     <&pdc 28 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "uplow", "critical";
 			#thermal-sensor-cells = <1>;
@@ -642,7 +922,7 @@
 			reg = <0 0x0c265000 0 0x1ff>, /* TM */
 			      <0 0x0c223000 0 0x8>; /* SROT */
 			#qcom,sensors = <16>;
-			interrupts = <&pdc 27 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&pdc 27 IRQ_TYPE_LEVEL_HIGH>,
 				     <&pdc 29 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "uplow", "critical";
 			#thermal-sensor-cells = <1>;
@@ -656,7 +936,6 @@
 			mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>;
 
 			#clock-cells = <0>;
-			#power-domain-cells = <1>;
 		};
 
 		spmi_bus: spmi@c440000 {
diff --git a/dts/src/arm64/qcom/sm7225-fairphone-fp4.dts b/dts/src/arm64/qcom/sm7225-fairphone-fp4.dts
index 8d6fd22873..d4af9e0dad 100644
--- a/dts/src/arm64/qcom/sm7225-fairphone-fp4.dts
+++ b/dts/src/arm64/qcom/sm7225-fairphone-fp4.dts
@@ -15,6 +15,7 @@
 / {
 	model = "Fairphone 4";
 	compatible = "fairphone,fp4", "qcom,sm7225";
+	chassis-type = "handset";
 
 	/* required for bootloader to select correct board */
 	qcom,msm-id = <434 0x10000>, <459 0x10000>;
@@ -52,6 +53,27 @@
 			gpios = <&pm6350_gpios 2 GPIO_ACTIVE_LOW>;
 		};
 	};
+
+	reserved-memory {
+		/*
+		 * The rmtfs memory region in downstream is 'dynamically allocated'
+		 * but given the same address every time. Hard code it as this address is
+		 * where the modem firmware expects it to be.
+		 */
+		memory@efe01000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0 0xefe01000 0 0x600000>;
+			no-map;
+
+			qcom,client-id = <1>;
+			qcom,vmid = <15>;
+		};
+	};
+};
+
+&adsp {
+	status = "okay";
+	firmware-name = "qcom/sm7225/fairphone4/adsp.mdt";
 };
 
 &apps_rsc {
@@ -268,6 +290,16 @@
 	};
 };
 
+&cdsp {
+	status = "okay";
+	firmware-name = "qcom/sm7225/fairphone4/cdsp.mdt";
+};
+
+&mpss {
+	status = "okay";
+	firmware-name = "qcom/sm7225/fairphone4/modem.mdt";
+};
+
 &pm6350_gpios {
 	gpio_keys_pin: gpio-keys-pin {
 		pins = "gpio2";
diff --git a/dts/src/arm64/qcom/sm8150.dtsi b/dts/src/arm64/qcom/sm8150.dtsi
index 81b4ff2cc4..6012322a59 100644
--- a/dts/src/arm64/qcom/sm8150.dtsi
+++ b/dts/src/arm64/qcom/sm8150.dtsi
@@ -1785,7 +1785,6 @@
 			compatible = "qcom,adreno-640.1",
 				     "qcom,adreno",
 				     "amd,imageon";
-			#stream-id-cells = <16>;
 
 			reg = <0 0x02c00000 0 0x40000>;
 			reg-names = "kgsl_3d0_reg_memory";
diff --git a/dts/src/arm64/qcom/sm8250-mtp.dts b/dts/src/arm64/qcom/sm8250-mtp.dts
index 5ffbcdd387..fb99cc2827 100644
--- a/dts/src/arm64/qcom/sm8250-mtp.dts
+++ b/dts/src/arm64/qcom/sm8250-mtp.dts
@@ -6,6 +6,9 @@
 /dts-v1/;
 
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/sound/qcom,q6afe.h>
+#include <dt-bindings/sound/qcom,q6asm.h>
+#include <dt-bindings/gpio/gpio.h>
 #include "sm8250.dtsi"
 #include "pm8150.dtsi"
 #include "pm8150b.dtsi"
@@ -624,8 +627,196 @@
 	firmware-name = "qcom/sm8250/slpi.mbn";
 };
 
+&soc {
+	wcd938x: codec {
+		compatible = "qcom,wcd9380-codec";
+		#sound-dai-cells = <1>;
+		reset-gpios = <&tlmm 32 0>;
+		vdd-buck-supply = <&vreg_s4a_1p8>;
+		vdd-rxtx-supply = <&vreg_s4a_1p8>;
+		vdd-io-supply = <&vreg_s4a_1p8>;
+		vdd-mic-bias-supply = <&vreg_bob>;
+		qcom,micbias1-microvolt = <1800000>;
+		qcom,micbias2-microvolt = <1800000>;
+		qcom,micbias3-microvolt = <1800000>;
+		qcom,micbias4-microvolt = <1800000>;
+		qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
+		qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
+		qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
+		qcom,rx-device = <&wcd_rx>;
+		qcom,tx-device = <&wcd_tx>;
+	};
+};
+
+&sound {
+	compatible = "qcom,sm8250-sndcard";
+	model = "SM8250-MTP-WCD9380-WSA8810-VA-DMIC";
+	audio-routing =
+		"SpkrLeft IN", "WSA_SPK1 OUT",
+		"SpkrRight IN", "WSA_SPK2 OUT",
+		"IN1_HPHL", "HPHL_OUT",
+		"IN2_HPHR", "HPHR_OUT",
+		"AMIC1", "MIC BIAS1",
+		"AMIC2", "MIC BIAS2",
+		"AMIC3", "MIC BIAS3",
+		"AMIC4", "MIC BIAS3",
+		"AMIC5", "MIC BIAS4",
+		"TX SWR_ADC0", "ADC1_OUTPUT",
+		"TX SWR_ADC1", "ADC2_OUTPUT",
+		"TX SWR_ADC2", "ADC3_OUTPUT",
+		"TX SWR_ADC3", "ADC4_OUTPUT",
+		"TX SWR_DMIC0", "DMIC1_OUTPUT",
+		"TX SWR_DMIC1", "DMIC2_OUTPUT",
+		"TX SWR_DMIC2", "DMIC3_OUTPUT",
+		"TX SWR_DMIC3", "DMIC4_OUTPUT",
+		"TX SWR_DMIC4", "DMIC5_OUTPUT",
+		"TX SWR_DMIC5", "DMIC6_OUTPUT",
+		"TX SWR_DMIC6", "DMIC7_OUTPUT",
+		"TX SWR_DMIC7", "DMIC8_OUTPUT";
+
+	mm1-dai-link {
+		link-name = "MultiMedia1";
+		cpu {
+			sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA1>;
+		};
+	};
+
+	mm2-dai-link {
+		link-name = "MultiMedia2";
+		cpu {
+			sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA2>;
+		};
+	};
+
+	mm3-dai-link {
+		link-name = "MultiMedia3";
+		cpu {
+			sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA3>;
+		};
+	};
+
+	wcd-playback-dai-link {
+		link-name = "WCD Playback";
+		cpu {
+			sound-dai = <&q6afedai RX_CODEC_DMA_RX_0>;
+		};
+		codec {
+			sound-dai = <&wcd938x 0>, <&swr1 0>, <&rxmacro 0>;
+		};
+		platform {
+			sound-dai = <&q6routing>;
+		};
+	};
+
+	wcd-capture-dai-link {
+		link-name = "WCD Capture";
+		cpu {
+			sound-dai = <&q6afedai TX_CODEC_DMA_TX_3>;
+		};
+
+		codec {
+			sound-dai = <&wcd938x 1>, <&swr2 0>, <&txmacro 0>;
+		};
+		platform {
+			sound-dai = <&q6routing>;
+		};
+	};
+
+	wsa-dai-link {
+		link-name = "WSA Playback";
+		cpu {
+			sound-dai = <&q6afedai WSA_CODEC_DMA_RX_0>;
+		};
+
+		codec {
+			sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&wsamacro 0>;
+		};
+		platform {
+			sound-dai = <&q6routing>;
+		};
+	};
+
+	va-dai-link {
+		link-name = "VA Capture";
+		cpu {
+			sound-dai = <&q6afedai VA_CODEC_DMA_TX_0>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+
+		codec {
+			sound-dai = <&vamacro 0>;
+		};
+	};
+};
+
+&swr0 {
+	left_spkr: wsa8810-right@0,3{
+		compatible = "sdw10217211000";
+		reg = <0 3>;
+		powerdown-gpios = <&tlmm 26 GPIO_ACTIVE_HIGH>;
+		#thermal-sensor-cells = <0>;
+		sound-name-prefix = "SpkrLeft";
+		#sound-dai-cells = <0>;
+	};
+
+	right_spkr: wsa8810-left@0,4{
+		compatible = "sdw10217211000";
+		reg = <0 4>;
+		powerdown-gpios = <&tlmm 127 GPIO_ACTIVE_HIGH>;
+		#thermal-sensor-cells = <0>;
+		sound-name-prefix = "SpkrRight";
+		#sound-dai-cells = <0>;
+	};
+};
+
+&swr1 {
+	wcd_rx: wcd9380-rx@0,4 {
+		compatible = "sdw20217010d00";
+		reg = <0 4>;
+		qcom,rx-port-mapping = <1 2 3 4 5>;
+	};
+};
+
+&swr2 {
+	wcd_tx: wcd9380-tx@0,3 {
+		compatible = "sdw20217010d00";
+		reg = <0 3>;
+		qcom,tx-port-mapping = <2 3 4 5>;
+	};
+};
+
 &tlmm {
 	gpio-reserved-ranges = <28 4>, <40 4>;
+
+	wcd938x_reset_default: wcd938x_reset_default {
+		mux {
+			pins = "gpio32";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio32";
+			drive-strength = <16>;
+			output-high;
+		};
+	};
+
+	wcd938x_reset_sleep: wcd938x_reset_sleep {
+		mux {
+			pins = "gpio32";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio32";
+			drive-strength = <16>;
+			bias-disable;
+			output-low;
+		};
+	};
 };
 
 &uart12 {
diff --git a/dts/src/arm64/qcom/sm8250.dtsi b/dts/src/arm64/qcom/sm8250.dtsi
index 6f6129b39c..5617a46e5c 100644
--- a/dts/src/arm64/qcom/sm8250.dtsi
+++ b/dts/src/arm64/qcom/sm8250.dtsi
@@ -99,6 +99,9 @@
 			dynamic-power-coefficient = <205>;
 			next-level-cache = <&L2_0>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
+					<&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
 			L2_0: l2-cache {
 				compatible = "cache";
@@ -118,6 +121,9 @@
 			dynamic-power-coefficient = <205>;
 			next-level-cache = <&L2_100>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
+					<&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
 			L2_100: l2-cache {
 				compatible = "cache";
@@ -134,6 +140,9 @@
 			dynamic-power-coefficient = <205>;
 			next-level-cache = <&L2_200>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
+					<&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
 			L2_200: l2-cache {
 				compatible = "cache";
@@ -150,6 +159,9 @@
 			dynamic-power-coefficient = <205>;
 			next-level-cache = <&L2_300>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
+					<&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
 			L2_300: l2-cache {
 				compatible = "cache";
@@ -166,6 +178,9 @@
 			dynamic-power-coefficient = <379>;
 			next-level-cache = <&L2_400>;
 			qcom,freq-domain = <&cpufreq_hw 1>;
+			operating-points-v2 = <&cpu4_opp_table>;
+			interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
+					<&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
 			L2_400: l2-cache {
 				compatible = "cache";
@@ -182,6 +197,9 @@
 			dynamic-power-coefficient = <379>;
 			next-level-cache = <&L2_500>;
 			qcom,freq-domain = <&cpufreq_hw 1>;
+			operating-points-v2 = <&cpu4_opp_table>;
+			interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
+					<&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
 			L2_500: l2-cache {
 				compatible = "cache";
@@ -199,6 +217,9 @@
 			dynamic-power-coefficient = <379>;
 			next-level-cache = <&L2_600>;
 			qcom,freq-domain = <&cpufreq_hw 1>;
+			operating-points-v2 = <&cpu4_opp_table>;
+			interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
+					<&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
 			L2_600: l2-cache {
 				compatible = "cache";
@@ -215,6 +236,9 @@
 			dynamic-power-coefficient = <444>;
 			next-level-cache = <&L2_700>;
 			qcom,freq-domain = <&cpufreq_hw 2>;
+			operating-points-v2 = <&cpu7_opp_table>;
+			interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
+					<&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
 			L2_700: l2-cache {
 				compatible = "cache";
@@ -259,6 +283,296 @@
 		};
 	};
 
+	cpu0_opp_table: cpu0_opp_table {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		cpu0_opp1: opp-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-peak-kBps = <800000 9600000>;
+		};
+
+		cpu0_opp2: opp-403200000 {
+			opp-hz = /bits/ 64 <403200000>;
+			opp-peak-kBps = <800000 9600000>;
+		};
+
+		cpu0_opp3: opp-518400000 {
+			opp-hz = /bits/ 64 <518400000>;
+			opp-peak-kBps = <800000 16588800>;
+		};
+
+		cpu0_opp4: opp-614400000 {
+			opp-hz = /bits/ 64 <614400000>;
+			opp-peak-kBps = <800000 16588800>;
+		};
+
+		cpu0_opp5: opp-691200000 {
+			opp-hz = /bits/ 64 <691200000>;
+			opp-peak-kBps = <800000 19660800>;
+		};
+
+		cpu0_opp6: opp-787200000 {
+			opp-hz = /bits/ 64 <787200000>;
+			opp-peak-kBps = <1804000 19660800>;
+		};
+
+		cpu0_opp7: opp-883200000 {
+			opp-hz = /bits/ 64 <883200000>;
+			opp-peak-kBps = <1804000 23347200>;
+		};
+
+		cpu0_opp8: opp-979200000 {
+			opp-hz = /bits/ 64 <979200000>;
+			opp-peak-kBps = <1804000 26419200>;
+		};
+
+		cpu0_opp9: opp-1075200000 {
+			opp-hz = /bits/ 64 <1075200000>;
+			opp-peak-kBps = <1804000 29491200>;
+		};
+
+		cpu0_opp10: opp-1171200000 {
+			opp-hz = /bits/ 64 <1171200000>;
+			opp-peak-kBps = <1804000 32563200>;
+		};
+
+		cpu0_opp11: opp-1248000000 {
+			opp-hz = /bits/ 64 <1248000000>;
+			opp-peak-kBps = <1804000 36249600>;
+		};
+
+		cpu0_opp12: opp-1344000000 {
+			opp-hz = /bits/ 64 <1344000000>;
+			opp-peak-kBps = <2188000 36249600>;
+		};
+
+		cpu0_opp13: opp-1420800000 {
+			opp-hz = /bits/ 64 <1420800000>;
+			opp-peak-kBps = <2188000 39321600>;
+		};
+
+		cpu0_opp14: opp-1516800000 {
+			opp-hz = /bits/ 64 <1516800000>;
+			opp-peak-kBps = <3072000 42393600>;
+		};
+
+		cpu0_opp15: opp-1612800000 {
+			opp-hz = /bits/ 64 <1612800000>;
+			opp-peak-kBps = <3072000 42393600>;
+		};
+
+		cpu0_opp16: opp-1708800000 {
+			opp-hz = /bits/ 64 <1708800000>;
+			opp-peak-kBps = <4068000 42393600>;
+		};
+
+		cpu0_opp17: opp-1804800000 {
+			opp-hz = /bits/ 64 <1804800000>;
+			opp-peak-kBps = <4068000 42393600>;
+		};
+	};
+
+	cpu4_opp_table: cpu4_opp_table {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		cpu4_opp1: opp-710400000 {
+			opp-hz = /bits/ 64 <710400000>;
+			opp-peak-kBps = <1804000 19660800>;
+		};
+
+		cpu4_opp2: opp-825600000 {
+			opp-hz = /bits/ 64 <825600000>;
+			opp-peak-kBps = <2188000 23347200>;
+		};
+
+		cpu4_opp3: opp-940800000 {
+			opp-hz = /bits/ 64 <940800000>;
+			opp-peak-kBps = <2188000 26419200>;
+		};
+
+		cpu4_opp4: opp-1056000000 {
+			opp-hz = /bits/ 64 <1056000000>;
+			opp-peak-kBps = <3072000 26419200>;
+		};
+
+		cpu4_opp5: opp-1171200000 {
+			opp-hz = /bits/ 64 <1171200000>;
+			opp-peak-kBps = <3072000 29491200>;
+		};
+
+		cpu4_opp6: opp-1286400000 {
+			opp-hz = /bits/ 64 <1286400000>;
+			opp-peak-kBps = <4068000 29491200>;
+		};
+
+		cpu4_opp7: opp-1382400000 {
+			opp-hz = /bits/ 64 <1382400000>;
+			opp-peak-kBps = <4068000 32563200>;
+		};
+
+		cpu4_opp8: opp-1478400000 {
+			opp-hz = /bits/ 64 <1478400000>;
+			opp-peak-kBps = <4068000 32563200>;
+		};
+
+		cpu4_opp9: opp-1574400000 {
+			opp-hz = /bits/ 64 <1574400000>;
+			opp-peak-kBps = <5412000 39321600>;
+		};
+
+		cpu4_opp10: opp-1670400000 {
+			opp-hz = /bits/ 64 <1670400000>;
+			opp-peak-kBps = <5412000 42393600>;
+		};
+
+		cpu4_opp11: opp-1766400000 {
+			opp-hz = /bits/ 64 <1766400000>;
+			opp-peak-kBps = <5412000 45465600>;
+		};
+
+		cpu4_opp12: opp-1862400000 {
+			opp-hz = /bits/ 64 <1862400000>;
+			opp-peak-kBps = <6220000 45465600>;
+		};
+
+		cpu4_opp13: opp-1958400000 {
+			opp-hz = /bits/ 64 <1958400000>;
+			opp-peak-kBps = <6220000 48537600>;
+		};
+
+		cpu4_opp14: opp-2054400000 {
+			opp-hz = /bits/ 64 <2054400000>;
+			opp-peak-kBps = <7216000 48537600>;
+		};
+
+		cpu4_opp15: opp-2150400000 {
+			opp-hz = /bits/ 64 <2150400000>;
+			opp-peak-kBps = <7216000 51609600>;
+		};
+
+		cpu4_opp16: opp-2246400000 {
+			opp-hz = /bits/ 64 <2246400000>;
+			opp-peak-kBps = <7216000 51609600>;
+		};
+
+		cpu4_opp17: opp-2342400000 {
+			opp-hz = /bits/ 64 <2342400000>;
+			opp-peak-kBps = <8368000 51609600>;
+		};
+
+		cpu4_opp18: opp-2419200000 {
+			opp-hz = /bits/ 64 <2419200000>;
+			opp-peak-kBps = <8368000 51609600>;
+		};
+	};
+
+	cpu7_opp_table: cpu7_opp_table {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		cpu7_opp1: opp-844800000 {
+			opp-hz = /bits/ 64 <844800000>;
+			opp-peak-kBps = <2188000 19660800>;
+		};
+
+		cpu7_opp2: opp-960000000 {
+			opp-hz = /bits/ 64 <960000000>;
+			opp-peak-kBps = <2188000 26419200>;
+		};
+
+		cpu7_opp3: opp-1075200000 {
+			opp-hz = /bits/ 64 <1075200000>;
+			opp-peak-kBps = <3072000 26419200>;
+		};
+
+		cpu7_opp4: opp-1190400000 {
+			opp-hz = /bits/ 64 <1190400000>;
+			opp-peak-kBps = <3072000 29491200>;
+		};
+
+		cpu7_opp5: opp-1305600000 {
+			opp-hz = /bits/ 64 <1305600000>;
+			opp-peak-kBps = <4068000 32563200>;
+		};
+
+		cpu7_opp6: opp-1401600000 {
+			opp-hz = /bits/ 64 <1401600000>;
+			opp-peak-kBps = <4068000 32563200>;
+		};
+
+		cpu7_opp7: opp-1516800000 {
+			opp-hz = /bits/ 64 <1516800000>;
+			opp-peak-kBps = <4068000 36249600>;
+		};
+
+		cpu7_opp8: opp-1632000000 {
+			opp-hz = /bits/ 64 <1632000000>;
+			opp-peak-kBps = <5412000 39321600>;
+		};
+
+		cpu7_opp9: opp-1747200000 {
+			opp-hz = /bits/ 64 <1708800000>;
+			opp-peak-kBps = <5412000 42393600>;
+		};
+
+		cpu7_opp10: opp-1862400000 {
+			opp-hz = /bits/ 64 <1862400000>;
+			opp-peak-kBps = <6220000 45465600>;
+		};
+
+		cpu7_opp11: opp-1977600000 {
+			opp-hz = /bits/ 64 <1977600000>;
+			opp-peak-kBps = <6220000 48537600>;
+		};
+
+		cpu7_opp12: opp-2073600000 {
+			opp-hz = /bits/ 64 <2073600000>;
+			opp-peak-kBps = <7216000 48537600>;
+		};
+
+		cpu7_opp13: opp-2169600000 {
+			opp-hz = /bits/ 64 <2169600000>;
+			opp-peak-kBps = <7216000 51609600>;
+		};
+
+		cpu7_opp14: opp-2265600000 {
+			opp-hz = /bits/ 64 <2265600000>;
+			opp-peak-kBps = <7216000 51609600>;
+		};
+
+		cpu7_opp15: opp-2361600000 {
+			opp-hz = /bits/ 64 <2361600000>;
+			opp-peak-kBps = <8368000 51609600>;
+		};
+
+		cpu7_opp16: opp-2457600000 {
+			opp-hz = /bits/ 64 <2457600000>;
+			opp-peak-kBps = <8368000 51609600>;
+		};
+
+		cpu7_opp17: opp-2553600000 {
+			opp-hz = /bits/ 64 <2553600000>;
+			opp-peak-kBps = <8368000 51609600>;
+		};
+
+		cpu7_opp18: opp-2649600000 {
+			opp-hz = /bits/ 64 <2649600000>;
+			opp-peak-kBps = <8368000 51609600>;
+		};
+
+		cpu7_opp19: opp-2745600000 {
+			opp-hz = /bits/ 64 <2745600000>;
+			opp-peak-kBps = <8368000 51609600>;
+		};
+
+		cpu7_opp20: opp-2841600000 {
+			opp-hz = /bits/ 64 <2841600000>;
+			opp-peak-kBps = <8368000 51609600>;
+		};
+	};
+
 	firmware {
 		scm: scm {
 			compatible = "qcom,scm";
@@ -1831,6 +2145,101 @@
 			#sound-dai-cells = <1>;
 		};
 
+		rxmacro: rxmacro@3200000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&rx_swr_active>;
+			compatible = "qcom,sm8250-lpass-rx-macro";
+			reg = <0 0x3200000 0 0x1000>;
+
+			clocks = <&q6afecc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				<&q6afecc LPASS_CLK_ID_TX_CORE_NPL_MCLK  LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				<&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				<&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				<&vamacro>;
+
+			clock-names = "mclk", "npl", "macro", "dcodec", "fsgen";
+
+			#clock-cells = <0>;
+			clock-frequency = <9600000>;
+			clock-output-names = "mclk";
+			#sound-dai-cells = <1>;
+		};
+
+		swr1: soundwire-controller@3210000 {
+			reg = <0 0x3210000 0 0x2000>;
+			compatible = "qcom,soundwire-v1.5.1";
+			interrupts = <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rxmacro>;
+			clock-names = "iface";
+			label = "RX";
+			qcom,din-ports = <0>;
+			qcom,dout-ports = <5>;
+
+			qcom,ports-sinterval-low =	/bits/ 8 <0x03 0x1F 0x1F 0x07 0x00>;
+			qcom,ports-offset1 =		/bits/ 8 <0x00 0x00 0x0B 0x01 0x00>;
+			qcom,ports-offset2 =		/bits/ 8 <0x00 0x00 0x0B 0x00 0x00>;
+			qcom,ports-hstart =		/bits/ 8 <0xFF 0x03 0xFF 0xFF 0xFF>;
+			qcom,ports-hstop =		/bits/ 8 <0xFF 0x06 0xFF 0xFF 0xFF>;
+			qcom,ports-word-length =	/bits/ 8 <0x01 0x07 0x04 0xFF 0xFF>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0xFF 0x00 0x01 0xFF 0xFF>;
+			qcom,ports-lane-control =	/bits/ 8 <0x01 0x00 0x00 0x00 0x00>;
+			qcom,ports-block-group-count =	/bits/ 8 <0xFF 0xFF 0xFF 0xFF 0x00>;
+
+			#sound-dai-cells = <1>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+		};
+
+		txmacro: txmacro@3220000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&tx_swr_active>;
+			compatible = "qcom,sm8250-lpass-tx-macro";
+			reg = <0 0x3220000 0 0x1000>;
+
+			clocks = <&q6afecc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6afecc LPASS_CLK_ID_TX_CORE_NPL_MCLK  LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&vamacro>;
+
+			clock-names = "mclk", "npl", "macro", "dcodec", "fsgen";
+
+			#clock-cells = <0>;
+			clock-frequency = <9600000>;
+			clock-output-names = "mclk";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			#sound-dai-cells = <1>;
+		};
+
+		/* tx macro */
+		swr2: soundwire-controller@3230000 {
+			reg = <0 0x3230000 0 0x2000>;
+			compatible = "qcom,soundwire-v1.5.1";
+			interrupts-extended = <&intc GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "core";
+
+			clocks = <&txmacro>;
+			clock-names = "iface";
+			label = "TX";
+
+			qcom,din-ports = <5>;
+			qcom,dout-ports = <0>;
+			qcom,ports-sinterval-low =	/bits/ 8 <0xFF 0x01 0x01 0x03 0x03>;
+			qcom,ports-offset1 =		/bits/ 8 <0xFF 0x01 0x00 0x02 0x00>;
+			qcom,ports-offset2 =		/bits/ 8 <0xFF 0x00 0x00 0x00 0x00>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0xFF 0xFF 0xFF 0xFF 0xFF>;
+			qcom,ports-hstart =		/bits/ 8 <0xFF 0xFF 0xFF 0xFF 0xFF>;
+			qcom,ports-hstop =		/bits/ 8 <0xFF 0xFF 0xFF 0xFF 0xFF>;
+			qcom,ports-word-length =	/bits/ 8 <0xFF 0xFF 0xFF 0xFF 0xFF>;
+			qcom,ports-block-group-count =	/bits/ 8 <0xFF 0xFF 0xFF 0xFF 0xFF>;
+			qcom,ports-lane-control =	/bits/ 8 <0xFF 0x00 0x01 0x00 0x01>;
+			qcom,port-offset = <1>;
+			#sound-dai-cells = <1>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+		};
+
 		aoncc: clock-controller@3380000 {
 			compatible = "qcom,sm8250-lpass-aoncc";
 			reg = <0 0x03380000 0 0x40000>;
@@ -1923,12 +2332,73 @@
 					input-enable;
 				};
 			};
+
+			rx_swr_active: rx_swr-active-pins {
+				clk {
+					pins = "gpio3";
+					function = "swr_rx_clk";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-disable;
+				};
+
+				data {
+					pins = "gpio4", "gpio5";
+					function = "swr_rx_data";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-bus-hold;
+				};
+			};
+
+			tx_swr_active: tx_swr-active-pins {
+				clk {
+					pins = "gpio0";
+					function = "swr_tx_clk";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-disable;
+				};
+
+				data {
+					pins = "gpio1", "gpio2";
+					function = "swr_tx_data";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-bus-hold;
+				};
+			};
+
+			tx_swr_sleep: tx_swr-sleep-pins {
+				clk {
+					pins = "gpio0";
+					function = "swr_tx_clk";
+					drive-strength = <2>;
+					input-enable;
+					bias-pull-down;
+				};
+
+				data1 {
+					pins = "gpio1";
+					function = "swr_tx_data";
+					drive-strength = <2>;
+					input-enable;
+					bias-bus-hold;
+				};
+
+				data2 {
+					pins = "gpio2";
+					function = "swr_tx_data";
+					drive-strength = <2>;
+					input-enable;
+					bias-pull-down;
+				};
+			};
 		};
 
 		gpu: gpu@3d00000 {
 			compatible = "qcom,adreno-650.2",
 				     "qcom,adreno";
-			#stream-id-cells = <16>;
 
 			reg = <0 0x03d00000 0 0x40000>;
 			reg-names = "kgsl_3d0_reg_memory";
diff --git a/dts/src/arm64/qcom/sm8350-hdk.dts b/dts/src/arm64/qcom/sm8350-hdk.dts
index be062377c9..1e5e9405d8 100644
--- a/dts/src/arm64/qcom/sm8350-hdk.dts
+++ b/dts/src/arm64/qcom/sm8350-hdk.dts
@@ -5,7 +5,6 @@
 
 /dts-v1/;
 
-#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 #include "sm8350.dtsi"
 
diff --git a/dts/src/arm64/qcom/sm8350-microsoft-surface-duo2.dts b/dts/src/arm64/qcom/sm8350-microsoft-surface-duo2.dts
new file mode 100644
index 0000000000..9cb1d8455f
--- /dev/null
+++ b/dts/src/arm64/qcom/sm8350-microsoft-surface-duo2.dts
@@ -0,0 +1,369 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (C) 2021, Microsoft Corporation
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sm8350.dtsi"
+#include "pm8350.dtsi"
+#include "pm8350b.dtsi"
+#include "pm8350c.dtsi"
+#include "pmk8350.dtsi"
+#include "pmr735a.dtsi"
+#include "pmr735b.dtsi"
+
+/ {
+	model = "Microsoft Surface Duo 2";
+	compatible = "microsoft,surface-duo2", "qcom,sm8350";
+	chassis-type = "handset";
+
+	aliases {
+		serial0 = &uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&adsp {
+	status = "okay";
+	firmware-name = "qcom/sm8350/microsoft/adsp.mbn";
+};
+
+&apps_rsc {
+	pm8350-rpmh-regulators {
+		compatible = "qcom,pm8350-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+		vdd-s11-supply = <&vph_pwr>;
+		vdd-s12-supply = <&vph_pwr>;
+
+		vdd-l1-l4-supply = <&vreg_s11b_0p95>;
+		vdd-l2-l7-supply = <&vreg_bob>;
+		vdd-l3-l5-supply = <&vreg_bob>;
+		vdd-l6-l9-l10-supply = <&vreg_s11b_0p95>;
+		vdd-l8-supply = <&vreg_s2c_0p8>;
+
+		vreg_s10b_1p8: smps10 {
+			regulator-name = "vreg_s10b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_s11b_0p95: smps11 {
+			regulator-name = "vreg_s11b_0p95";
+			regulator-min-microvolt = <752000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		vreg_s12b_1p25: smps12 {
+			regulator-name = "vreg_s12b_1p25";
+			regulator-min-microvolt = <1224000>;
+			regulator-max-microvolt = <1360000>;
+		};
+
+		vreg_l1b_0p88: ldo1 {
+			regulator-name = "vreg_l1b_0p88";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b_3p07: ldo2 {
+			regulator-name = "vreg_l2b_3p07";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3b_0p9: ldo3 {
+			regulator-name = "vreg_l3b_0p9";
+			regulator-min-microvolt = <904000>;
+			regulator-max-microvolt = <904000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5b_0p88: ldo5 {
+			regulator-name = "vreg_l3b_0p9";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <888000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b_1p2: ldo6 {
+			regulator-name = "vreg_l6b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1208000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7b_2p96: ldo7 {
+			regulator-name = "vreg_l7b_2p96";
+			regulator-min-microvolt = <2400000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9b_1p2: ldo9 {
+			regulator-name = "vreg_l9b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	pm8350c-rpmh-regulators {
+		compatible = "qcom,pm8350c-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+
+		vdd-l1-l12-supply = <&vreg_s1c_1p86>;
+		vdd-l2-l8-supply = <&vreg_s1c_1p86>;
+		vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>;
+		vdd-l6-l9-l11-supply = <&vreg_bob>;
+		vdd-l10-supply = <&vreg_s12b_1p25>;
+
+		vdd-bob-supply = <&vph_pwr>;
+
+		vreg_s1c_1p86: smps1 {
+			regulator-name = "vreg_s1c_1p86";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1952000>;
+		};
+
+		vreg_s2c_0p8: smps2 {
+			regulator-name = "vreg_s2c_0p8";
+			regulator-min-microvolt = <640000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		vreg_s10c_1p05: smps10 {
+			regulator-name = "vreg_s10c_1p05";
+			regulator-min-microvolt = <1048000>;
+			regulator-max-microvolt = <1128000>;
+		};
+
+		vreg_bob: bob {
+			regulator-name = "vreg_bob";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+		};
+
+		vreg_l1c_1p8: ldo1 {
+			regulator-name = "vreg_l1c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c_1p8: ldo2 {
+			regulator-name = "vreg_l2c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c_3p0: ldo3 {
+			regulator-name = "vreg_l3c_3p0";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4c_uim1: ldo4 {
+			regulator-name = "vreg_l4c_uim1";
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5c_uim2: ldo5 {
+			regulator-name = "vreg_l5c_uim2";
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6c_1p8: ldo6 {
+			regulator-name = "vreg_l6c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7c_3p0: ldo7 {
+			regulator-name = "vreg_l7c_3p0";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8c_1p8: ldo8 {
+			regulator-name = "vreg_l8c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9c_2p96: ldo9 {
+			regulator-name = "vreg_l9c_2p96";
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10c_1p2: ldo10 {
+			regulator-name = "vreg_l10c_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11c_2p96: ldo11 {
+			regulator-name = "vreg_l11c_2p96";
+			regulator-min-microvolt = <2400000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12c_1p8: ldo12 {
+			regulator-name = "vreg_l12c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13c_3p0: ldo13 {
+			regulator-name = "vreg_l13c_3p0";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&cdsp {
+	status = "okay";
+	firmware-name = "qcom/sm8350/microsoft/cdsp.mbn";
+};
+
+&ipa {
+	status = "okay";
+
+	memory-region = <&pil_ipa_fw_mem>;
+};
+
+&mpss {
+	status = "okay";
+	firmware-name = "qcom/sm8350/microsoft/modem.mbn";
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&slpi {
+	status = "okay";
+	firmware-name = "qcom/sm8350/microsoft/slpi.mbn";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <4 4>, <12 4>, <56 4>, <76 4>;
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	status = "okay";
+
+	reset-gpios = <&tlmm 203 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l7b_2p96>;
+	vcc-max-microamp = <800000>;
+	vccq-supply = <&vreg_l9b_1p2>;
+	vccq-max-microamp = <900000>;
+};
+
+&ufs_mem_phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l5b_0p88>;
+	vdda-max-microamp = <91600>;
+	vdda-pll-supply = <&vreg_l6b_1p2>;
+	vdda-pll-max-microamp = <19000>;
+};
+
+&usb_1 {
+	status = "okay";
+	dr_mode = "peripheral";
+};
+
+&usb_1_hsphy {
+	status = "okay";
+
+	vdda-pll-supply = <&vreg_l5b_0p88>;
+	vdda18-supply = <&vreg_l1c_1p8>;
+	vdda33-supply = <&vreg_l2b_3p07>;
+};
+
+&usb_1_qmpphy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l6b_1p2>;
+	vdda-pll-supply = <&vreg_l1b_0p88>;
+};
+
+&usb_2 {
+	status = "okay";
+};
+
+&usb_2_hsphy {
+	status = "okay";
+
+	vdda-pll-supply = <&vreg_l5b_0p88>;
+	vdda18-supply = <&vreg_l1c_1p8>;
+	vdda33-supply = <&vreg_l2b_3p07>;
+};
+
+&usb_2_qmpphy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l6b_1p2>;
+	vdda-pll-supply = <&vreg_l5b_0p88>;
+};
diff --git a/dts/src/arm64/qcom/sm8350-mtp.dts b/dts/src/arm64/qcom/sm8350-mtp.dts
index 06eedbe52c..52cf304560 100644
--- a/dts/src/arm64/qcom/sm8350-mtp.dts
+++ b/dts/src/arm64/qcom/sm8350-mtp.dts
@@ -5,7 +5,6 @@
 
 /dts-v1/;
 
-#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 #include "sm8350.dtsi"
 #include "pm8350.dtsi"
@@ -290,6 +289,15 @@
 	status = "okay";
 };
 
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	status = "okay";
+	linux,code = <KEY_VOLUMEDOWN>;
+};
+
 &qupv3_id_0 {
 	status = "okay";
 };
diff --git a/dts/src/arm64/qcom/sm8350-sony-xperia-sagami-pdx214.dts b/dts/src/arm64/qcom/sm8350-sony-xperia-sagami-pdx214.dts
new file mode 100644
index 0000000000..cc650508dc
--- /dev/null
+++ b/dts/src/arm64/qcom/sm8350-sony-xperia-sagami-pdx214.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+/dts-v1/;
+
+#include "sm8350-sony-xperia-sagami.dtsi"
+
+/ {
+	model = "Sony Xperia 5 III";
+	compatible = "sony,pdx214-generic", "qcom,sm8350";
+};
+
+&framebuffer {
+	width = <1080>;
+	height = <2520>;
+	stride = <(1080 * 4)>;
+};
diff --git a/dts/src/arm64/qcom/sm8350-sony-xperia-sagami-pdx215.dts b/dts/src/arm64/qcom/sm8350-sony-xperia-sagami-pdx215.dts
new file mode 100644
index 0000000000..d21bbeb603
--- /dev/null
+++ b/dts/src/arm64/qcom/sm8350-sony-xperia-sagami-pdx215.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+/dts-v1/;
+
+#include "sm8350-sony-xperia-sagami.dtsi"
+
+/ {
+	model = "Sony Xperia 1 III";
+	compatible = "sony,pdx215-generic", "qcom,sm8350";
+};
diff --git a/dts/src/arm64/qcom/sm8350-sony-xperia-sagami.dtsi b/dts/src/arm64/qcom/sm8350-sony-xperia-sagami.dtsi
new file mode 100644
index 0000000000..90b13cbe2f
--- /dev/null
+++ b/dts/src/arm64/qcom/sm8350-sony-xperia-sagami.dtsi
@@ -0,0 +1,259 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+#include "sm8350.dtsi"
+#include "pm8350.dtsi"
+#include "pm8350b.dtsi"
+#include "pm8350c.dtsi"
+#include "pmk8350.dtsi"
+#include "pmr735a.dtsi"
+#include "pmr735b.dtsi"
+
+/ {
+	/*
+	 * Yes, you are correct, there is NO MORE {msm,board,pmic}-id on SM8350!
+	 * Adding it will cause the bootloader to go crazy and randomly crash
+	 * shortly after closing UEFI boot services.. Perhaps that has something
+	 * to do with the OS running inside a VM now..?
+	 */
+
+	chassis-type = "handset";
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		framebuffer: framebuffer@e1000000 {
+			compatible = "simple-framebuffer";
+			reg = <0 0xe1000000 0 0x2300000>;
+
+			/* The display, even though it's 4K, initializes at 1080-ish p */
+			width = <1096>;
+			height = <2560>;
+			stride = <(1096 * 4)>;
+			format = "a8r8g8b8";
+			/*
+			 * That's (going to be) a lot of clocks, but it's necessary due
+			 * to unused clk cleanup & no panel driver yet
+			 */
+			clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+				 <&gcc GCC_DISP_SF_AXI_CLK>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		/* For reasons still unknown, GAssist key and Camera Focus/Shutter don't work.. */
+
+		vol-down {
+			label = "Volume Down";
+			linux,code = <KEY_VOLUMEDOWN>;
+			gpios = <&pmk8350_gpios 3 GPIO_ACTIVE_LOW>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			gpio-key,wakeup;
+		};
+	};
+
+	reserved-memory {
+		cont_splash_mem: memory@e1000000 {
+			reg = <0 0xe1000000 0 0x2300000>;
+			no-map;
+		};
+
+		ramoops@ffc00000 {
+			compatible = "ramoops";
+			reg = <0 0xffc00000 0 0x100000>;
+			console-size = <0x40000>;
+			record-size = <0x1000>;
+			no-map;
+		};
+	};
+};
+
+&adsp {
+	status = "okay";
+	firmware-name = "qcom/adsp.mbn";
+};
+
+&cdsp {
+	status = "okay";
+	firmware-name = "qcom/cdsp.mbn";
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <1000000>;
+
+	/* Some subset of SONY IMX663 camera sensor @ 38 */
+};
+
+&i2c2 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	/* Richwave RTC6226 FM Radio Receiver @ 64 */
+};
+
+&i2c4 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	/* Samsung Touchscreen (needs I2C GPI DMA) @ 48 */
+};
+
+&i2c11 {
+	status = "okay";
+	clock-frequency = <1000000>;
+
+	cs35l41_l: cs35l41@40 {
+		compatible = "cirrus,cs35l41";
+		reg = <0x40>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <36 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;
+		cirrus,boost-peak-milliamp = <4000>;
+		cirrus,boost-ind-nanohenry = <1000>;
+		cirrus,boost-cap-microfarad = <15>;
+		cirrus,asp-sdout-hiz = <3>;
+		cirrus,gpio2-src-select = <2>;
+		cirrus,gpio2-output-enable;
+		#sound-dai-cells = <1>;
+	};
+
+	cs35l41_r: cs35l41@41 {
+		compatible = "cirrus,cs35l41";
+		reg = <0x41>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <36 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;
+		cirrus,boost-peak-milliamp = <4000>;
+		cirrus,boost-ind-nanohenry = <1000>;
+		cirrus,boost-cap-microfarad = <15>;
+		cirrus,asp-sdout-hiz = <3>;
+		cirrus,gpio2-src-select = <2>;
+		cirrus,gpio2-output-enable;
+		#sound-dai-cells = <1>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+	/* Clock frequency was not specified downstream, let's park it to 100 KHz */
+	clock-frequency = <100000>;
+
+	/* AMS TCS3490 RGB+IR color sensor @ 72 */
+};
+
+&i2c13 {
+	status = "okay";
+	/* Clock frequency was not specified downstream, let's park it to 100 KHz */
+	clock-frequency = <100000>;
+
+	/* Qualcomm PM8008i/PM8008j (?) @ 8, 9, c, d */
+	/* Dialog SLG51000 CMIC @ 75 */
+};
+
+&i2c15 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	/* NXP SN1X0 NFC @ 28 */
+};
+
+&i2c17 {
+	status = "okay";
+	clock-frequency = <1000000>;
+
+	/* Cirrus Logic CS40L25A boosted haptics driver @ 40 */
+};
+
+&ipa {
+	status = "okay";
+	memory-region = <&pil_ipa_fw_mem>;
+	firmware-name = "qcom/ipa_fws.mbn";
+};
+
+&mpss {
+	status = "okay";
+	firmware-name = "qcom/modem.mbn";
+};
+
+&pmk8350_rtc {
+	status = "okay";
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	status = "okay";
+	linux,code = <KEY_VOLUMEUP>;
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&qupv3_id_2 {
+	status = "okay";
+};
+
+&slpi {
+	status = "okay";
+	firmware-name = "qcom/slpi.mbn";
+};
+
+&spi14 {
+	status = "okay";
+
+	/* NXP SN1X0 NFC Secure Element @ 0 */
+};
+
+&tlmm {
+	gpio-reserved-ranges = <44 4>;
+
+	ts_int_default: ts-int-default {
+		pin = "gpio23";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		input-enable;
+	};
+};
+
+/* BIG WARNING! DO NOT TOUCH UFS, YOUR DEVICE WILL DIE! */
+&ufs_mem_hc { status = "disabled"; };
+&ufs_mem_phy { status = "disabled"; };
+
+/* TODO: Make USB3 work (perhaps needs regulators for higher-current operation?) */
+&usb_1 {
+	status = "okay";
+
+	qcom,select-utmi-as-pipe-clk;
+};
+
+&usb_1_dwc3 {
+	dr_mode = "peripheral";
+
+	maximum-speed = "high-speed";
+	phys = <&usb_1_hsphy>;
+	phy-names = "usb2-phy";
+};
+
+&usb_1_hsphy {
+	status = "okay";
+};
+
+&usb_1_qmpphy {
+	status = "okay";
+};
diff --git a/dts/src/arm64/qcom/sm8350.dtsi b/dts/src/arm64/qcom/sm8350.dtsi
index d134280e29..53b39e718f 100644
--- a/dts/src/arm64/qcom/sm8350.dtsi
+++ b/dts/src/arm64/qcom/sm8350.dtsi
@@ -6,6 +6,7 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/qcom,gcc-sm8350.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interconnect/qcom,sm8350.h>
 #include <dt-bindings/mailbox/qcom-ipcc.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
@@ -583,8 +584,30 @@
 			#clock-cells = <1>;
 			#reset-cells = <1>;
 			#power-domain-cells = <1>;
-			clock-names = "bi_tcxo", "sleep_clk";
-			clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>;
+			clock-names = "bi_tcxo",
+				      "sleep_clk",
+				      "pcie_0_pipe_clk",
+				      "pcie_1_pipe_clk",
+				      "ufs_card_rx_symbol_0_clk",
+				      "ufs_card_rx_symbol_1_clk",
+				      "ufs_card_tx_symbol_0_clk",
+				      "ufs_phy_rx_symbol_0_clk",
+				      "ufs_phy_rx_symbol_1_clk",
+				      "ufs_phy_tx_symbol_0_clk",
+				      "usb3_phy_wrapper_gcc_usb30_pipe_clk",
+				      "usb3_uni_phy_sec_gcc_usb30_pipe_clk";
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&sleep_clk>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>;
 		};
 
 		ipcc: mailbox@408000 {
@@ -596,17 +619,305 @@
 			#mbox-cells = <2>;
 		};
 
+		qup_opp_table_100mhz: qup-100mhz-opp-table {
+			compatible = "operating-points-v2";
+
+			opp-50000000 {
+				opp-hz = /bits/ 64 <50000000>;
+				required-opps = <&rpmhpd_opp_min_svs>;
+			};
+
+			opp-75000000 {
+				opp-hz = /bits/ 64 <75000000>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+			};
+
+			opp-100000000 {
+				opp-hz = /bits/ 64 <100000000>;
+				required-opps = <&rpmhpd_opp_svs>;
+			};
+		};
+
+		qup_opp_table_120mhz: qup-120mhz-opp-table {
+			compatible = "operating-points-v2";
+
+			opp-50000000 {
+				opp-hz = /bits/ 64 <50000000>;
+				required-opps = <&rpmhpd_opp_min_svs>;
+			};
+
+			opp-75000000 {
+				opp-hz = /bits/ 64 <75000000>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+			};
+
+			opp-120000000 {
+				opp-hz = /bits/ 64 <120000000>;
+				required-opps = <&rpmhpd_opp_svs>;
+			};
+		};
+
+		qupv3_id_2: geniqup@8c0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0x008c0000 0x0 0x6000>;
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>;
+			iommus = <&apps_smmu 0x5e3 0x0>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "disabled";
+
+			i2c14: i2c@880000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00880000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c14_default>;
+				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi14: spi@880000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00880000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SM8350_CX>;
+				operating-points-v2 = <&qup_opp_table_120mhz>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c15: i2c@884000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00884000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c15_default>;
+				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi15: spi@884000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00884000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SM8350_CX>;
+				operating-points-v2 = <&qup_opp_table_120mhz>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c16: i2c@888000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00888000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c16_default>;
+				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi16: spi@888000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00888000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SM8350_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c17: i2c@88c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x0088c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c17_default>;
+				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi17: spi@88c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x0088c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SM8350_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			/* QUP no. 18 seems to be strictly SPI/UART-only */
+
+			spi18: spi@890000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00890000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SM8350_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart18: serial@890000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00890000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart18_default>;
+				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SM8350_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+				status = "disabled";
+			};
+
+			i2c19: i2c@894000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00894000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c19_default>;
+				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi19: spi@894000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00894000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SM8350_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
 		qupv3_id_0: geniqup@9c0000 {
 			compatible = "qcom,geni-se-qup";
 			reg = <0x0 0x009c0000 0x0 0x6000>;
 			clock-names = "m-ahb", "s-ahb";
 			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
 				 <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+			iommus = <&apps_smmu 0x5a3 0>;
 			#address-cells = <2>;
 			#size-cells = <2>;
 			ranges;
 			status = "disabled";
 
+			i2c0: i2c@980000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00980000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c0_default>;
+				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi0: spi@980000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00980000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SM8350_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@984000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00984000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c1_default>;
+				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi1: spi@984000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00984000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SM8350_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@988000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00988000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c2_default>;
+				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi2: spi@988000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00988000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SM8350_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
 			uart2: serial@98c000 {
 				compatible = "qcom,geni-debug-uart";
 				reg = <0 0x0098c000 0 0x4000>;
@@ -615,6 +926,140 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_uart3_default_state>;
 				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SM8350_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			/* QUP no. 3 seems to be strictly SPI-only */
+
+			spi3: spi@98c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x0098c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SM8350_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c4: i2c@990000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00990000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c4_default>;
+				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi4: spi@990000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00990000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SM8350_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c5: i2c@994000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00994000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c5_default>;
+				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi5: spi@994000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00994000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SM8350_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c6: i2c@998000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00998000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c6_default>;
+				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi6: spi@998000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00998000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SM8350_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart6: serial@998000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00998000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart6_default>;
+				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SM8350_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+				status = "disabled";
+			};
+
+			i2c7: i2c@99c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x0099c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c7_default>;
+				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi7: spi@99c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x0099c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SM8350_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -627,23 +1072,167 @@
 			clock-names = "m-ahb", "s-ahb";
 			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
 				 <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
+			iommus = <&apps_smmu 0x43 0>;
 			#address-cells = <2>;
 			#size-cells = <2>;
 			ranges;
 			status = "disabled";
 
+			i2c8: i2c@a80000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a80000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c8_default>;
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi8: spi@a80000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a80000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SM8350_CX>;
+				operating-points-v2 = <&qup_opp_table_120mhz>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c9: i2c@a84000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a84000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c9_default>;
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi9: spi@a84000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a84000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SM8350_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c10: i2c@a88000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a88000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c10_default>;
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi10: spi@a88000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a88000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SM8350_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c11: i2c@a8c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a8c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c11_default>;
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi11: spi@a8c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a8c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SM8350_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c12: i2c@a90000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a90000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c12_default>;
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi12: spi@a90000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a90000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SM8350_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
 			i2c13: i2c@a94000 {
 				compatible = "qcom,geni-i2c";
 				reg = <0 0x00a94000 0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
 				pinctrl-names = "default";
-				pinctrl-0 = <&qup_i2c13_default_state>;
+				pinctrl-0 = <&qup_i2c13_default>;
 				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
 			};
+
+			spi13: spi@a94000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a94000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SM8350_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
 		};
 
 		apps_smmu: iommu@15000000 {
@@ -910,7 +1499,7 @@
 			reg = <0 0x0c263000 0 0x1ff>, /* TM */
 			      <0 0x0c222000 0 0x8>; /* SROT */
 			#qcom,sensors = <15>;
-			interrupts = <&pdc 26 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&pdc 26 IRQ_TYPE_LEVEL_HIGH>,
 				     <&pdc 28 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "uplow", "critical";
 			#thermal-sensor-cells = <1>;
@@ -921,7 +1510,7 @@
 			reg = <0 0x0c265000 0 0x1ff>, /* TM */
 			      <0 0x0c223000 0 0x8>; /* SROT */
 			#qcom,sensors = <14>;
-			interrupts = <&pdc 27 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&pdc 27 IRQ_TYPE_LEVEL_HIGH>,
 				     <&pdc 29 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "uplow", "critical";
 			#thermal-sensor-cells = <1>;
@@ -982,17 +1571,144 @@
 				};
 			};
 
-			qup_i2c13_default_state: qup-i2c13-default-state {
-				mux {
-					pins = "gpio0", "gpio1";
-					function = "qup13";
-				};
+			qup_uart6_default: qup-uart6-default {
+				pins = "gpio30", "gpio31";
+				function = "qup6";
+				drive-strength = <2>;
+				bias-disable;
+			};
 
-				config {
-					pins = "gpio0", "gpio1";
-					drive-strength = <2>;
-					bias-pull-up;
-				};
+			qup_uart18_default: qup-uart18-default {
+				pins = "gpio58", "gpio59";
+				function = "qup18";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_i2c0_default: qup-i2c0-default {
+				pins = "gpio4", "gpio5";
+				function = "qup0";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c1_default: qup-i2c1-default {
+				pins = "gpio8", "gpio9";
+				function = "qup1";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c2_default: qup-i2c2-default {
+				pins = "gpio12", "gpio13";
+				function = "qup2";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c4_default: qup-i2c4-default {
+				pins = "gpio20", "gpio21";
+				function = "qup4";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c5_default: qup-i2c5-default {
+				pins = "gpio24", "gpio25";
+				function = "qup5";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c6_default: qup-i2c6-default {
+				pins = "gpio28", "gpio29";
+				function = "qup6";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c7_default: qup-i2c7-default {
+				pins = "gpio32", "gpio33";
+				function = "qup7";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_i2c8_default: qup-i2c8-default {
+				pins = "gpio36", "gpio37";
+				function = "qup8";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c9_default: qup-i2c9-default {
+				pins = "gpio40", "gpio41";
+				function = "qup9";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c10_default: qup-i2c10-default {
+				pins = "gpio44", "gpio45";
+				function = "qup10";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c11_default: qup-i2c11-default {
+				pins = "gpio48", "gpio49";
+				function = "qup11";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c12_default: qup-i2c12-default {
+				pins = "gpio52", "gpio53";
+				function = "qup12";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c13_default: qup-i2c13-default {
+				pins = "gpio0", "gpio1";
+				function = "qup13";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c14_default: qup-i2c14-default {
+				pins = "gpio56", "gpio57";
+				function = "qup14";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_i2c15_default: qup-i2c15-default {
+				pins = "gpio60", "gpio61";
+				function = "qup15";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_i2c16_default: qup-i2c16-default {
+				pins = "gpio64", "gpio65";
+				function = "qup16";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_i2c17_default: qup-i2c17-default {
+				pins = "gpio72", "gpio73";
+				function = "qup17";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_i2c19_default: qup-i2c19-default {
+				pins = "gpio76", "gpio77";
+				function = "qup19";
+				drive-strength = <2>;
+				bias-disable;
 			};
 		};
 
@@ -1007,6 +1723,8 @@
 			compatible = "arm,gic-v3";
 			#interrupt-cells = <3>;
 			interrupt-controller;
+			#redistributor-regions = <1>;
+			redistributor-stride = <0 0x20000>;
 			reg = <0x0 0x17a00000 0x0 0x10000>,     /* GICD */
 			      <0x0 0x17a60000 0x0 0x100000>;    /* GICR * 8 */
 			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
@@ -1514,6 +2232,12 @@
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
+		system-cache-controller@9200000 {
+			compatible = "qcom,sm8350-llcc";
+			reg = <0 0x09200000 0 0x1d0000>, <0 0x09600000 0 0x50000>;
+			reg-names = "llcc_base", "llcc_broadcast_base";
+		};
+
 		usb_1: usb@a6f8800 {
 			compatible = "qcom,sm8350-dwc3", "qcom,dwc3";
 			reg = <0 0x0a6f8800 0 0x400>;
@@ -2447,7 +3171,7 @@
 			};
 		};
 
-		camera-thermal-bottom {
+		cam-thermal-bottom {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 
diff --git a/dts/src/arm64/qcom/sm8450-qrd.dts b/dts/src/arm64/qcom/sm8450-qrd.dts
new file mode 100644
index 0000000000..b68ab247e6
--- /dev/null
+++ b/dts/src/arm64/qcom/sm8450-qrd.dts
@@ -0,0 +1,398 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Linaro Limited
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sm8450.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. SM8450 QRD";
+	compatible = "qcom,sm8450-qrd", "qcom,sm8450";
+
+	aliases {
+		serial0 = &uart7;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&apps_rsc {
+	pm8350-rpmh-regulators {
+		compatible = "qcom,pm8350-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+		vdd-s11-supply = <&vph_pwr>;
+		vdd-s12-supply = <&vph_pwr>;
+
+		vdd-l1-l4-supply = <&vreg_s11b_0p95>;
+		vdd-l2-l7-supply = <&vreg_bob>;
+		vdd-l3-l5-supply = <&vreg_bob>;
+		vdd-l6-l9-l10-supply = <&vreg_s12b_1p25>;
+		vdd-l8-supply = <&vreg_s2h_0p95>;
+
+		vreg_s10b_1p8: smps10 {
+			regulator-name = "vreg_s10b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_s11b_0p95: smps11 {
+			regulator-name = "vreg_s11b_0p95";
+			regulator-min-microvolt = <848000>;
+			regulator-max-microvolt = <1104000>;
+		};
+
+		vreg_s12b_1p25: smps12 {
+			regulator-name = "vreg_s12b_1p25";
+			regulator-min-microvolt = <1224000>;
+			regulator-max-microvolt = <1400000>;
+		};
+
+		vreg_l1b_0p91: ldo1 {
+			regulator-name = "vreg_l1b_0p91";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b_3p07: ldo2 {
+			regulator-name = "vreg_l2b_3p07";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3b_0p9: ldo3 {
+			regulator-name = "vreg_l3b_0p9";
+			regulator-min-microvolt = <904000>;
+			regulator-max-microvolt = <904000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5b_0p88: ldo5 {
+			regulator-name = "vreg_l5b_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <888000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b_1p2: ldo6 {
+			regulator-name = "vreg_l6b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7b_2p5: ldo7 {
+			regulator-name = "vreg_l7b_2p5";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9b_1p2: ldo9 {
+			regulator-name = "vreg_l9b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	pm8350c-rpmh-regulators {
+		compatible = "qcom,pm8350c-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+
+		vdd-l1-l12-supply = <&vreg_bob>;
+		vdd-l2-l8-supply = <&vreg_bob>;
+		vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>;
+		vdd-l6-l9-l11-supply = <&vreg_bob>;
+
+		vdd-bob-supply = <&vph_pwr>;
+
+		vreg_s1c_1p86: smps1 {
+			regulator-name = "vreg_s1c_1p86";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2024000>;
+		};
+
+		vreg_s10c_1p05: smps10 {
+			regulator-name = "vreg_s10c_1p05";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1100000>;
+		};
+
+		vreg_bob: bob {
+			regulator-name = "vreg_bob";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+		};
+
+		vreg_l1c_1p8: ldo1 {
+			regulator-name = "vreg_l1c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c_3p0: ldo3 {
+			regulator-name = "vreg_l3c_3p0";
+			regulator-min-microvolt = <3296000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4c_1p8: ldo4 {
+			regulator-name = "vreg_l4c_1p8";
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5c_1p8: ldo5 {
+			regulator-name = "vreg_l5c_1p8";
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6c_1p8: ldo6 {
+			regulator-name = "vreg_l6c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7c_3p0: ldo7 {
+			regulator-name = "vreg_l7c_3p0";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8c_1p8: ldo8 {
+			regulator-name = "vreg_l8c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9c_2p96: ldo9 {
+			regulator-name = "vreg_l9c_2p96";
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12c_1p8: ldo12 {
+			regulator-name = "vreg_l12c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1968000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13c_3p0: ldo13 {
+			regulator-name = "vreg_l13c_3p0";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	pm8450-rpmh-regulators {
+		compatible = "qcom,pm8450-rpmh-regulators";
+		qcom,pmic-id = "h";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+
+		vdd-l2-supply = <&vreg_bob>;
+		vdd-l3-supply = <&vreg_bob>;
+		vdd-l4-supply = <&vreg_bob>;
+
+		vreg_s2h_0p95: smps2 {
+			regulator-name = "vreg_s2h_0p95";
+			regulator-min-microvolt = <848000>;
+			regulator-max-microvolt = <1104000>;
+		};
+
+		vreg_s3h_0p5: smps3 {
+			regulator-name = "vreg_s3h_0p5";
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <500000>;
+		};
+
+		vreg_l2h_0p91: ldo2 {
+			regulator-name = "vreg_l2h_0p91";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3h_0p91: ldo3 {
+			regulator-name = "vreg_l3h_0p91";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+	};
+
+	pmr735a-rpmh-regulators {
+		compatible = "qcom,pmr735a-rpmh-regulators";
+		qcom,pmic-id = "e";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+
+		vdd-l1-l2-supply = <&vreg_s2e_0p85>;
+		vdd-l3-supply = <&vreg_s1e_1p25>;
+		vdd-l4-supply = <&vreg_s1c_1p86>;
+		vdd-l5-l6-supply = <&vreg_s1c_1p86>;
+		vdd-l7-bob-supply = <&vreg_bob>;
+
+		vreg_s1e_1p25: smps1 {
+			regulator-name = "vreg_s1e_1p25";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1296000>;
+		};
+
+		vreg_s2e_0p85: smps2 {
+			regulator-name = "vreg_s2e_0p85";
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1040000>;
+		};
+
+		vreg_l1e_0p8: ldo1 {
+			regulator-name = "vreg_l1e_0p8";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+		};
+
+		vreg_l2e_0p8: ldo2 {
+			regulator-name = "vreg_l2e_0p8";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+		};
+
+		vreg_l3e_1p2: ldo3 {
+			regulator-name = "vreg_l3e_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		vreg_l4e_1p7: ldo4 {
+			regulator-name = "vreg_l4e_1p7";
+			regulator-min-microvolt = <1776000>;
+			regulator-max-microvolt = <1776000>;
+		};
+
+		vreg_l5e_0p88: ldo5 {
+			regulator-name = "vreg_l5e_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+		};
+
+		vreg_l6e_1p2: ldo6 {
+			regulator-name = "vreg_l6e_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+	};
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <28 4>, <36 4>;
+};
+
+&uart7 {
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	status = "okay";
+
+	reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l7b_2p5>;
+	vcc-max-microamp = <1100000>;
+	vccq-supply = <&vreg_l9b_1p2>;
+	vccq-max-microamp = <1200000>;
+};
+
+&ufs_mem_phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l5b_0p88>;
+	vdda-pll-supply = <&vreg_l6b_1p2>;
+	vdda-max-microamp = <173000>;
+	vdda-pll-max-microamp = <24900>;
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "peripheral";
+};
+
+&usb_1_hsphy {
+	status = "okay";
+
+	vdda-pll-supply = <&vreg_l5b_0p88>;
+	vdda18-supply = <&vreg_l1c_1p8>;
+	vdda33-supply = <&vreg_l2b_3p07>;
+};
+
+&usb_1_qmpphy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l6b_1p2>;
+	vdda-pll-supply = <&vreg_l1b_0p91>;
+};
diff --git a/dts/src/arm64/qcom/sm8450.dtsi b/dts/src/arm64/qcom/sm8450.dtsi
new file mode 100644
index 0000000000..10c25ad2d0
--- /dev/null
+++ b/dts/src/arm64/qcom/sm8450.dtsi
@@ -0,0 +1,1115 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Linaro Limited
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,gcc-sm8450.h>
+#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	clocks {
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <76800000>;
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32000>;
+		};
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "qcom,kryo780";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			power-domains = <&CPU_PD0>;
+			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			L2_0: l2-cache {
+			      compatible = "cache";
+			      next-level-cache = <&L3_0>;
+				L3_0: l3-cache {
+				      compatible = "cache";
+				};
+			};
+		};
+
+		CPU1: cpu@100 {
+			device_type = "cpu";
+			compatible = "qcom,kryo780";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			next-level-cache = <&L2_100>;
+			power-domains = <&CPU_PD1>;
+			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			L2_100: l2-cache {
+			      compatible = "cache";
+			      next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU2: cpu@200 {
+			device_type = "cpu";
+			compatible = "qcom,kryo780";
+			reg = <0x0 0x200>;
+			enable-method = "psci";
+			next-level-cache = <&L2_200>;
+			power-domains = <&CPU_PD2>;
+			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			L2_200: l2-cache {
+			      compatible = "cache";
+			      next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU3: cpu@300 {
+			device_type = "cpu";
+			compatible = "qcom,kryo780";
+			reg = <0x0 0x300>;
+			enable-method = "psci";
+			next-level-cache = <&L2_300>;
+			power-domains = <&CPU_PD3>;
+			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			L2_300: l2-cache {
+			      compatible = "cache";
+			      next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU4: cpu@400 {
+			device_type = "cpu";
+			compatible = "qcom,kryo780";
+			reg = <0x0 0x400>;
+			enable-method = "psci";
+			next-level-cache = <&L2_400>;
+			power-domains = <&CPU_PD4>;
+			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			L2_400: l2-cache {
+			      compatible = "cache";
+			      next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU5: cpu@500 {
+			device_type = "cpu";
+			compatible = "qcom,kryo780";
+			reg = <0x0 0x500>;
+			enable-method = "psci";
+			next-level-cache = <&L2_500>;
+			power-domains = <&CPU_PD5>;
+			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			L2_500: l2-cache {
+			      compatible = "cache";
+			      next-level-cache = <&L3_0>;
+			};
+
+		};
+
+		CPU6: cpu@600 {
+			device_type = "cpu";
+			compatible = "qcom,kryo780";
+			reg = <0x0 0x600>;
+			enable-method = "psci";
+			next-level-cache = <&L2_600>;
+			power-domains = <&CPU_PD6>;
+			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			L2_600: l2-cache {
+			      compatible = "cache";
+			      next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU7: cpu@700 {
+			device_type = "cpu";
+			compatible = "qcom,kryo780";
+			reg = <0x0 0x700>;
+			enable-method = "psci";
+			next-level-cache = <&L2_700>;
+			power-domains = <&CPU_PD7>;
+			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 2>;
+			L2_700: l2-cache {
+			      compatible = "cache";
+			      next-level-cache = <&L3_0>;
+			};
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+
+				core1 {
+					cpu = <&CPU1>;
+				};
+
+				core2 {
+					cpu = <&CPU2>;
+				};
+
+				core3 {
+					cpu = <&CPU3>;
+				};
+
+				core4 {
+					cpu = <&CPU4>;
+				};
+
+				core5 {
+					cpu = <&CPU5>;
+				};
+
+				core6 {
+					cpu = <&CPU6>;
+				};
+
+				core7 {
+					cpu = <&CPU7>;
+				};
+			};
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "silver-rail-power-collapse";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <274>;
+				exit-latency-us = <480>;
+				min-residency-us = <3934>;
+				local-timer-stop;
+			};
+
+			BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "gold-rail-power-collapse";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <327>;
+				exit-latency-us = <1502>;
+				min-residency-us = <4488>;
+				local-timer-stop;
+			};
+		};
+
+		domain-idle-states {
+			CLUSTER_SLEEP_0: cluster-sleep-0 {
+				compatible = "domain-idle-state";
+				idle-state-name = "cluster-l3-off";
+				arm,psci-suspend-param = <0x4100c344>;
+				entry-latency-us = <584>;
+				exit-latency-us = <2332>;
+				min-residency-us = <6118>;
+				local-timer-stop;
+			};
+
+			CLUSTER_SLEEP_1: cluster-sleep-1 {
+				compatible = "domain-idle-state";
+				idle-state-name = "cluster-power-collapse";
+				arm,psci-suspend-param = <0x4100c344>;
+				entry-latency-us = <2893>;
+				exit-latency-us = <4023>;
+				min-residency-us = <9987>;
+				local-timer-stop;
+			};
+		};
+	};
+
+	firmware {
+		scm: scm {
+			compatible = "qcom,scm-sm8450", "qcom,scm";
+			#reset-cells = <1>;
+		};
+	};
+
+	memory@a0000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the size */
+		reg = <0x0 0xa0000000 0x0 0x0>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+
+		CPU_PD0: cpu0 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD1: cpu1 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD2: cpu2 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD3: cpu3 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD4: cpu4 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+		};
+
+		CPU_PD5: cpu5 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+		};
+
+		CPU_PD6: cpu6 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+		};
+
+		CPU_PD7: cpu7 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+		};
+
+		CLUSTER_PD: cpu-cluster0 {
+			#power-domain-cells = <0>;
+			domain-idle-states = <&CLUSTER_SLEEP_0>;
+		};
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		hyp_mem: memory@80000000 {
+			reg = <0x0 0x80000000 0x0 0x600000>;
+			no-map;
+		};
+
+		xbl_dt_log_mem: memory@80600000 {
+			reg = <0x0 0x80600000 0x0 0x40000>;
+			no-map;
+		};
+
+		xbl_ramdump_mem: memory@80640000 {
+			reg = <0x0 0x80640000 0x0 0x180000>;
+			no-map;
+		};
+
+		xbl_sc_mem: memory@807c0000 {
+			reg = <0x0 0x807c0000 0x0 0x40000>;
+			no-map;
+		};
+
+		aop_image_mem: memory@80800000 {
+			reg = <0x0 0x80800000 0x0 0x60000>;
+			no-map;
+		};
+
+		aop_cmd_db_mem: memory@80860000 {
+			compatible = "qcom,cmd-db";
+			reg = <0x0 0x80860000 0x0 0x20000>;
+			no-map;
+		};
+
+		aop_config_mem: memory@80880000 {
+			reg = <0x0 0x80880000 0x0 0x20000>;
+			no-map;
+		};
+
+		tme_crash_dump_mem: memory@808a0000 {
+			reg = <0x0 0x808a0000 0x0 0x40000>;
+			no-map;
+		};
+
+		tme_log_mem: memory@808e0000 {
+			reg = <0x0 0x808e0000 0x0 0x4000>;
+			no-map;
+		};
+
+		uefi_log_mem: memory@808e4000 {
+			reg = <0x0 0x808e4000 0x0 0x10000>;
+			no-map;
+		};
+
+		/* secdata region can be reused by apps */
+		smem: memory@80900000 {
+			compatible = "qcom,smem";
+			reg = <0x0 0x80900000 0x0 0x200000>;
+			hwlocks = <&tcsr_mutex 3>;
+			no-map;
+		};
+
+		cpucp_fw_mem: memory@80b00000 {
+			reg = <0x0 0x80b00000 0x0 0x100000>;
+			no-map;
+		};
+
+		cdsp_secure_heap: memory@80c00000 {
+			reg = <0x0 0x80c00000 0x0 0x4600000>;
+			no-map;
+		};
+
+		camera_mem: memory@85200000 {
+			reg = <0x0 0x85200000 0x0 0x500000>;
+			no-map;
+		};
+
+		video_mem: memory@85700000 {
+			reg = <0x0 0x85700000 0x0 0x700000>;
+			no-map;
+		};
+
+		adsp_mem: memory@85e00000 {
+			reg = <0x0 0x85e00000 0x0 0x2100000>;
+			no-map;
+		};
+
+		slpi_mem: memory@88000000 {
+			reg = <0x0 0x88000000 0x0 0x1900000>;
+			no-map;
+		};
+
+		cdsp_mem: memory@89900000 {
+			reg = <0x0 0x89900000 0x0 0x2000000>;
+			no-map;
+		};
+
+		ipa_fw_mem: memory@8b900000 {
+			reg = <0x0 0x8b900000 0x0 0x10000>;
+			no-map;
+		};
+
+		ipa_gsi_mem: memory@8b910000 {
+			reg = <0x0 0x8b910000 0x0 0xa000>;
+			no-map;
+		};
+
+		gpu_micro_code_mem: memory@8b91a000 {
+			reg = <0x0 0x8b91a000 0x0 0x2000>;
+			no-map;
+		};
+
+		spss_region_mem: memory@8ba00000 {
+			reg = <0x0 0x8ba00000 0x0 0x180000>;
+			no-map;
+		};
+
+		/* First part of the "SPU secure shared memory" region */
+		spu_tz_shared_mem: memory@8bb80000 {
+			reg = <0x0 0x8bb80000 0x0 0x60000>;
+			no-map;
+		};
+
+		/* Second part of the "SPU secure shared memory" region */
+		spu_modem_shared_mem: memory@8bbe0000 {
+			reg = <0x0 0x8bbe0000 0x0 0x20000>;
+			no-map;
+		};
+
+		mpss_mem: memory@8bc00000 {
+			reg = <0x0 0x8bc00000 0x0 0x13200000>;
+			no-map;
+		};
+
+		cvp_mem: memory@9ee00000 {
+			reg = <0x0 0x9ee00000 0x0 0x700000>;
+			no-map;
+		};
+
+		global_sync_mem: memory@a6f00000 {
+			reg = <0x0 0xa6f00000 0x0 0x100000>;
+			no-map;
+		};
+
+		/* uefi region can be reused by APPS */
+
+		/* Linux kernel image is loaded at 0xa0000000 */
+
+		oem_vm_mem: memory@bb000000 {
+			reg = <0x0 0xbb000000 0x0 0x5000000>;
+			no-map;
+		};
+
+		mte_mem: memory@c0000000 {
+			reg = <0x0 0xc0000000 0x0 0x20000000>;
+			no-map;
+		};
+
+		qheebsp_reserved_mem: memory@e0000000 {
+			reg = <0x0 0xe0000000 0x0 0x600000>;
+			no-map;
+		};
+
+		cpusys_vm_mem: memory@e0600000 {
+			reg = <0x0 0xe0600000 0x0 0x400000>;
+			no-map;
+		};
+
+		hyp_reserved_mem: memory@e0a00000 {
+			reg = <0x0 0xe0a00000 0x0 0x100000>;
+			no-map;
+		};
+
+		trust_ui_vm_mem: memory@e0b00000 {
+			reg = <0x0 0xe0b00000 0x0 0x4af3000>;
+			no-map;
+		};
+
+		trust_ui_vm_qrtr: memory@e55f3000 {
+			reg = <0x0 0xe55f3000 0x0 0x9000>;
+			no-map;
+		};
+
+		trust_ui_vm_vblk0_ring: memory@e55fc000 {
+			reg = <0x0 0xe55fc000 0x0 0x4000>;
+			no-map;
+		};
+
+		trust_ui_vm_swiotlb: memory@e5600000 {
+			reg = <0x0 0xe5600000 0x0 0x100000>;
+			no-map;
+		};
+
+		tz_stat_mem: memory@e8800000 {
+			reg = <0x0 0xe8800000 0x0 0x100000>;
+			no-map;
+		};
+
+		tags_mem: memory@e8900000 {
+			reg = <0x0 0xe8900000 0x0 0x1200000>;
+			no-map;
+		};
+
+		qtee_mem: memory@e9b00000 {
+			reg = <0x0 0xe9b00000 0x0 0x500000>;
+			no-map;
+		};
+
+		trusted_apps_mem: memory@ea000000 {
+			reg = <0x0 0xea000000 0x0 0x3900000>;
+			no-map;
+		};
+
+		trusted_apps_ext_mem: memory@ed900000 {
+			reg = <0x0 0xed900000 0x0 0x3b00000>;
+			no-map;
+		};
+	};
+
+	soc: soc@0 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0 0 0 0 0x10 0>;
+		dma-ranges = <0 0 0 0 0x10 0>;
+		compatible = "simple-bus";
+
+		gcc: clock-controller@100000 {
+			compatible = "qcom,gcc-sm8450";
+			reg = <0x0 0x00100000 0x0 0x1f4200>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			clock-names = "bi_tcxo", "sleep_clk";
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>;
+		};
+
+		qupv3_id_0: geniqup@9c0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0x009c0000 0x0 0x2000>;
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "disabled";
+
+			uart7: serial@99c000 {
+				compatible = "qcom,geni-debug-uart";
+				reg = <0 0x0099c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart7_tx>, <&qup_uart7_rx>;
+				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		qupv3_id_1: geniqup@ac0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0x00ac0000 0x0 0x6000>;
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "disabled";
+
+			i2c13: i2c@a94000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a94000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c13_data_clk>;
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c14: i2c@a98000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a98000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c14_data_clk>;
+				interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		tcsr_mutex: hwlock@1f40000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x0 0x01f40000 0x0 0x40000>;
+			#hwlock-cells = <1>;
+		};
+
+		usb_1_hsphy: phy@88e3000 {
+			compatible = "qcom,sm8450-usb-hs-phy",
+				     "qcom,usb-snps-hs-7nm-phy";
+			reg = <0 0x088e3000 0 0x400>;
+			status = "disabled";
+			#phy-cells = <0>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "ref";
+
+			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+		};
+
+		usb_1_qmpphy: phy-wrapper@88e9000 {
+			compatible = "qcom,sm8450-qmp-usb3-phy";
+			reg = <0 0x088e9000 0 0x200>,
+			      <0 0x088e8000 0 0x20>;
+			status = "disabled";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
+			clock-names = "aux", "ref_clk_src", "com_aux";
+
+			resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>,
+				 <&gcc GCC_USB3_PHY_PRIM_BCR>;
+			reset-names = "phy", "common";
+
+			usb_1_ssphy: phy@88e9200 {
+				reg = <0 0x088e9200 0 0x200>,
+				      <0 0x088e9400 0 0x200>,
+				      <0 0x088e9c00 0 0x400>,
+				      <0 0x088e9600 0 0x200>,
+				      <0 0x088e9800 0 0x200>,
+				      <0 0x088e9a00 0 0x100>;
+				#phy-cells = <0>;
+				#clock-cells = <1>;
+				clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+				clock-names = "pipe0";
+				clock-output-names = "usb3_phy_pipe_clk_src";
+			};
+		};
+
+		pdc: interrupt-controller@b220000 {
+			compatible = "qcom,sm8450-pdc", "qcom,pdc";
+			reg = <0 0x0b220000 0 0x30000>, <0 0x174000f0 0 0x64>;
+			qcom,pdc-ranges = <0 480 12>, <14 494 24>, <40 520 54>,
+					  <94 609 31>, <125 63 1>, <126 716 12>;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&intc>;
+			interrupt-controller;
+		};
+
+		tlmm: pinctrl@f100000 {
+			compatible = "qcom,sm8450-tlmm";
+			reg = <0 0x0f100000 0 0x300000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-ranges = <&tlmm 0 0 211>;
+			wakeup-parent = <&pdc>;
+
+			qup_i2c13_data_clk: qup-i2c13-data-clk {
+				pins = "gpio48", "gpio49";
+				function = "qup13";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c14_data_clk: qup-i2c14-data-clk {
+				pins = "gpio52", "gpio53";
+				function = "qup14";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_uart7_rx: qup-uart7-rx {
+				pins = "gpio26";
+				function = "qup7";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_uart7_tx: qup-uart7-tx {
+				pins = "gpio27";
+				function = "qup7";
+				drive-strength = <2>;
+				bias-disable;
+			};
+		};
+
+		apps_smmu: iommu@15000000 {
+			compatible = "qcom,sm8450-smmu-500", "arm,mmu-500";
+			reg = <0 0x15000000 0 0x100000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <2>;
+			interrupts =    <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 697 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		intc: interrupt-controller@17100000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			#redistributor-regions = <1>;
+			redistributor-stride = <0x0 0x40000>;
+			reg = <0x0 0x17100000 0x0 0x10000>,     /* GICD */
+			      <0x0 0x17180000 0x0 0x200000>;    /* GICR * 8 */
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		timer@17420000 {
+			compatible = "arm,armv7-timer-mem";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			reg = <0x0 0x17420000 0x0 0x1000>;
+			clock-frequency = <19200000>;
+
+			frame@17421000 {
+				frame-number = <0>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0 0x17421000 0x0 0x1000>,
+				      <0x0 0x17422000 0x0 0x1000>;
+			};
+
+			frame@17423000 {
+				frame-number = <1>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0 0x17423000 0x0 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17425000 {
+				frame-number = <2>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0 0x17425000 0x0 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17427000 {
+				frame-number = <3>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0 0x17427000 0x0 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17429000 {
+				frame-number = <4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0 0x17429000 0x0 0x1000>;
+				status = "disabled";
+			};
+
+			frame@1742b000 {
+				frame-number = <5>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0 0x1742b000 0x0 0x1000>;
+				status = "disabled";
+			};
+
+			frame@1742d000 {
+				frame-number = <6>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0 0x1742d000 0x0 0x1000>;
+				status = "disabled";
+			};
+		};
+
+		apps_rsc: rsc@17a00000 {
+			label = "apps_rsc";
+			compatible = "qcom,rpmh-rsc";
+			reg = <0x0 0x17a00000 0x0 0x10000>,
+			      <0x0 0x17a10000 0x0 0x10000>,
+			      <0x0 0x17a20000 0x0 0x10000>,
+			      <0x0 0x17a30000 0x0 0x10000>;
+			reg-names = "drv-0", "drv-1", "drv-2", "drv-3";
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,tcs-offset = <0xd00>;
+			qcom,drv-id = <2>;
+			qcom,tcs-config = <ACTIVE_TCS  3>, <SLEEP_TCS   2>,
+					  <WAKE_TCS    2>, <CONTROL_TCS 0>;
+
+			apps_bcm_voter: bcm-voter {
+				compatible = "qcom,bcm-voter";
+			};
+
+			rpmhcc: clock-controller {
+				compatible = "qcom,sm8450-rpmh-clk";
+				#clock-cells = <1>;
+				clock-names = "xo";
+				clocks = <&xo_board>;
+			};
+
+			rpmhpd: power-controller {
+				compatible = "qcom,sm8450-rpmhpd";
+				#power-domain-cells = <1>;
+				operating-points-v2 = <&rpmhpd_opp_table>;
+
+				rpmhpd_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					rpmhpd_opp_ret: opp1 {
+						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+					};
+
+					rpmhpd_opp_min_svs: opp2 {
+						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+					};
+
+					rpmhpd_opp_low_svs: opp3 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					};
+
+					rpmhpd_opp_svs: opp4 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					};
+
+					rpmhpd_opp_svs_l1: opp5 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					};
+
+					rpmhpd_opp_nom: opp6 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					};
+
+					rpmhpd_opp_nom_l1: opp7 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					};
+
+					rpmhpd_opp_nom_l2: opp8 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
+					};
+
+					rpmhpd_opp_turbo: opp9 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					};
+
+					rpmhpd_opp_turbo_l1: opp10 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					};
+				};
+			};
+		};
+
+		cpufreq_hw: cpufreq@17d91000 {
+			compatible = "qcom,sm8450-cpufreq-epss", "qcom,cpufreq-epss";
+			reg = <0 0x17d91000 0 0x1000>,
+			      <0 0x17d92000 0 0x1000>,
+			      <0 0x17d93000 0 0x1000>;
+			reg-names = "freq-domain0", "freq-domain1", "freq-domain2";
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
+			clock-names = "xo", "alternate";
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dcvsh-irq-0", "dcvsh-irq-1", "dcvsh-irq-2";
+			#freq-domain-cells = <1>;
+		};
+
+		ufs_mem_hc: ufshc@1d84000 {
+			compatible = "qcom,sm8450-ufshc", "qcom,ufshc",
+				     "jedec,ufs-2.0";
+			reg = <0 0x01d84000 0 0x3000>;
+			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&ufs_mem_phy_lanes>;
+			phy-names = "ufsphy";
+			lanes-per-direction = <2>;
+			#reset-cells = <1>;
+			resets = <&gcc GCC_UFS_PHY_BCR>;
+			reset-names = "rst";
+
+			power-domains = <&gcc UFS_PHY_GDSC>;
+
+			iommus = <&apps_smmu 0xe0 0x0>;
+
+			clock-names =
+				"core_clk",
+				"bus_aggr_clk",
+				"iface_clk",
+				"core_clk_unipro",
+				"ref_clk",
+				"tx_lane0_sync_clk",
+				"rx_lane0_sync_clk",
+				"rx_lane1_sync_clk";
+			clocks =
+				<&gcc GCC_UFS_PHY_AXI_CLK>,
+				<&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+				<&gcc GCC_UFS_PHY_AHB_CLK>,
+				<&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
+				<&rpmhcc RPMH_CXO_CLK>,
+				<&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
+				<&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
+				<&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
+			freq-table-hz =
+				<75000000 300000000>,
+				<0 0>,
+				<0 0>,
+				<75000000 300000000>,
+				<75000000 300000000>,
+				<0 0>,
+				<0 0>,
+				<0 0>;
+			status = "disabled";
+		};
+
+		ufs_mem_phy: phy@1d87000 {
+			compatible = "qcom,sm8450-qmp-ufs-phy";
+			reg = <0 0x01d87000 0 0xe10>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			clock-names = "ref", "ref_aux", "qref";
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
+				 <&gcc GCC_UFS_0_CLKREF_EN>;
+
+			resets = <&ufs_mem_hc 0>;
+			reset-names = "ufsphy";
+			status = "disabled";
+
+			ufs_mem_phy_lanes: lanes@1d87400 {
+				reg = <0 0x01d87400 0 0x108>,
+				      <0 0x01d87600 0 0x1e0>,
+				      <0 0x01d87c00 0 0x1dc>,
+				      <0 0x01d87800 0 0x108>,
+				      <0 0x01d87a00 0 0x1e0>;
+				#phy-cells = <0>;
+				#clock-cells = <0>;
+			};
+		};
+
+		usb_1: usb@a6f8800 {
+			compatible = "qcom,sm8450-dwc3", "qcom,dwc3";
+			reg = <0 0x0a6f8800 0 0x400>;
+			status = "disabled";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>;
+			clock-names = "cfg_noc", "core", "iface", "mock_utmi",
+				      "sleep";
+
+			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <200000000>;
+
+			interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 14 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 17 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hs_phy_irq", "dp_hs_phy_irq",
+					  "dm_hs_phy_irq", "ss_phy_irq";
+
+			power-domains = <&gcc USB30_PRIM_GDSC>;
+
+			resets = <&gcc GCC_USB30_PRIM_BCR>;
+
+			usb_1_dwc3: usb@a600000 {
+				compatible = "snps,dwc3";
+				reg = <0 0x0a600000 0 0xcd00>;
+				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+				iommus = <&apps_smmu 0x0 0x0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
+				phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
+				phy-names = "usb2-phy", "usb3-phy";
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+		clock-frequency = <19200000>;
+	};
+};
diff --git a/dts/src/arm64/renesas/cat875.dtsi b/dts/src/arm64/renesas/cat875.dtsi
index a69d24e9c6..8c9da8b4bd 100644
--- a/dts/src/arm64/renesas/cat875.dtsi
+++ b/dts/src/arm64/renesas/cat875.dtsi
@@ -18,6 +18,7 @@
 	pinctrl-names = "default";
 	renesas,no-ether-link;
 	phy-handle = <&phy0>;
+	phy-mode = "rgmii-id";
 	status = "okay";
 
 	phy0: ethernet-phy@0 {
diff --git a/dts/src/arm64/renesas/r8a774a1.dtsi b/dts/src/arm64/renesas/r8a774a1.dtsi
index 6f4fffacfc..eda6a84037 100644
--- a/dts/src/arm64/renesas/r8a774a1.dtsi
+++ b/dts/src/arm64/renesas/r8a774a1.dtsi
@@ -58,7 +58,7 @@
 		clock-frequency = <0>;
 	};
 
-	cluster0_opp: opp_table0 {
+	cluster0_opp: opp-table-0 {
 		compatible = "operating-points-v2";
 		opp-shared;
 
@@ -80,7 +80,7 @@
 		};
 	};
 
-	cluster1_opp: opp_table1 {
+	cluster1_opp: opp-table-1 {
 		compatible = "operating-points-v2";
 		opp-shared;
 
@@ -2276,7 +2276,8 @@
 				     "renesas,rcar-gen3-sdhi";
 			reg = <0 0xee100000 0 0x2000>;
 			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 314>;
+			clocks = <&cpg CPG_MOD 314>, <&cpg CPG_CORE R8A774A1_CLK_SD0H>;
+			clock-names = "core", "clkh";
 			max-frequency = <200000000>;
 			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
 			resets = <&cpg 314>;
@@ -2288,7 +2289,8 @@
 				     "renesas,rcar-gen3-sdhi";
 			reg = <0 0xee120000 0 0x2000>;
 			interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 313>;
+			clocks = <&cpg CPG_MOD 313>, <&cpg CPG_CORE R8A774A1_CLK_SD1H>;
+			clock-names = "core", "clkh";
 			max-frequency = <200000000>;
 			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
 			resets = <&cpg 313>;
@@ -2300,7 +2302,8 @@
 				     "renesas,rcar-gen3-sdhi";
 			reg = <0 0xee140000 0 0x2000>;
 			interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 312>;
+			clocks = <&cpg CPG_MOD 312>, <&cpg CPG_CORE R8A774A1_CLK_SD2H>;
+			clock-names = "core", "clkh";
 			max-frequency = <200000000>;
 			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
 			resets = <&cpg 312>;
@@ -2312,7 +2315,8 @@
 				     "renesas,rcar-gen3-sdhi";
 			reg = <0 0xee160000 0 0x2000>;
 			interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 311>;
+			clocks = <&cpg CPG_MOD 311>, <&cpg CPG_CORE R8A774A1_CLK_SD3H>;
+			clock-names = "core", "clkh";
 			max-frequency = <200000000>;
 			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
 			resets = <&cpg 311>;
@@ -2784,7 +2788,7 @@
 	};
 
 	thermal-zones {
-		sensor_thermal1: sensor-thermal1 {
+		sensor1_thermal: sensor1-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 			thermal-sensors = <&tsc 0>;
@@ -2799,7 +2803,7 @@
 			};
 		};
 
-		sensor_thermal2: sensor-thermal2 {
+		sensor2_thermal: sensor2-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 			thermal-sensors = <&tsc 1>;
@@ -2814,7 +2818,7 @@
 			};
 		};
 
-		sensor_thermal3: sensor-thermal3 {
+		sensor3_thermal: sensor3-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 			thermal-sensors = <&tsc 2>;
diff --git a/dts/src/arm64/renesas/r8a774b1.dtsi b/dts/src/arm64/renesas/r8a774b1.dtsi
index 0f7bdfc90a..44f79fbd75 100644
--- a/dts/src/arm64/renesas/r8a774b1.dtsi
+++ b/dts/src/arm64/renesas/r8a774b1.dtsi
@@ -47,7 +47,7 @@
 		clock-frequency = <0>;
 	};
 
-	cluster0_opp: opp_table0 {
+	cluster0_opp: opp-table-0 {
 		compatible = "operating-points-v2";
 		opp-shared;
 
@@ -2133,7 +2133,8 @@
 				     "renesas,rcar-gen3-sdhi";
 			reg = <0 0xee100000 0 0x2000>;
 			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 314>;
+			clocks = <&cpg CPG_MOD 314>, <&cpg CPG_CORE R8A774B1_CLK_SD0H>;
+			clock-names = "core", "clkh";
 			max-frequency = <200000000>;
 			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
 			resets = <&cpg 314>;
@@ -2145,7 +2146,8 @@
 				     "renesas,rcar-gen3-sdhi";
 			reg = <0 0xee120000 0 0x2000>;
 			interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 313>;
+			clocks = <&cpg CPG_MOD 313>, <&cpg CPG_CORE R8A774B1_CLK_SD1H>;
+			clock-names = "core", "clkh";
 			max-frequency = <200000000>;
 			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
 			resets = <&cpg 313>;
@@ -2157,7 +2159,8 @@
 				     "renesas,rcar-gen3-sdhi";
 			reg = <0 0xee140000 0 0x2000>;
 			interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 312>;
+			clocks = <&cpg CPG_MOD 312>, <&cpg CPG_CORE R8A774B1_CLK_SD2H>;
+			clock-names = "core", "clkh";
 			max-frequency = <200000000>;
 			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
 			resets = <&cpg 312>;
@@ -2169,7 +2172,8 @@
 				     "renesas,rcar-gen3-sdhi";
 			reg = <0 0xee160000 0 0x2000>;
 			interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 311>;
+			clocks = <&cpg CPG_MOD 311>, <&cpg CPG_CORE R8A774B1_CLK_SD3H>;
+			clock-names = "core", "clkh";
 			max-frequency = <200000000>;
 			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
 			resets = <&cpg 311>;
@@ -2629,7 +2633,7 @@
 	};
 
 	thermal-zones {
-		sensor_thermal1: sensor-thermal1 {
+		sensor1_thermal: sensor1-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 			thermal-sensors = <&tsc 0>;
@@ -2644,7 +2648,7 @@
 			};
 		};
 
-		sensor_thermal2: sensor-thermal2 {
+		sensor2_thermal: sensor2-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 			thermal-sensors = <&tsc 1>;
@@ -2659,7 +2663,7 @@
 			};
 		};
 
-		sensor_thermal3: sensor-thermal3 {
+		sensor3_thermal: sensor3-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 			thermal-sensors = <&tsc 2>;
diff --git a/dts/src/arm64/renesas/r8a774c0.dtsi b/dts/src/arm64/renesas/r8a774c0.dtsi
index d597772c4c..b8dcbbbf3d 100644
--- a/dts/src/arm64/renesas/r8a774c0.dtsi
+++ b/dts/src/arm64/renesas/r8a774c0.dtsi
@@ -44,7 +44,7 @@
 		clock-frequency = <0>;
 	};
 
-	cluster1_opp: opp_table10 {
+	cluster1_opp: opp-table-1 {
 		compatible = "operating-points-v2";
 		opp-shared;
 		opp-800000000 {
@@ -1626,7 +1626,8 @@
 				     "renesas,rcar-gen3-sdhi";
 			reg = <0 0xee100000 0 0x2000>;
 			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 314>;
+			clocks = <&cpg CPG_MOD 314>, <&cpg CPG_CORE R8A774C0_CLK_SD0H>;
+			clock-names = "core", "clkh";
 			max-frequency = <200000000>;
 			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
 			resets = <&cpg 314>;
@@ -1638,7 +1639,8 @@
 				     "renesas,rcar-gen3-sdhi";
 			reg = <0 0xee120000 0 0x2000>;
 			interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 313>;
+			clocks = <&cpg CPG_MOD 313>, <&cpg CPG_CORE R8A774C0_CLK_SD1H>;
+			clock-names = "core", "clkh";
 			max-frequency = <200000000>;
 			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
 			resets = <&cpg 313>;
@@ -1650,7 +1652,8 @@
 				     "renesas,rcar-gen3-sdhi";
 			reg = <0 0xee160000 0 0x2000>;
 			interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 311>;
+			clocks = <&cpg CPG_MOD 311>, <&cpg CPG_CORE R8A774C0_CLK_SD3H>;
+			clock-names = "core", "clkh";
 			max-frequency = <200000000>;
 			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
 			resets = <&cpg 311>;
diff --git a/dts/src/arm64/renesas/r8a774e1.dtsi b/dts/src/arm64/renesas/r8a774e1.dtsi
index 379a130027..e6d8610730 100644
--- a/dts/src/arm64/renesas/r8a774e1.dtsi
+++ b/dts/src/arm64/renesas/r8a774e1.dtsi
@@ -47,7 +47,7 @@
 		clock-frequency = <0>;
 	};
 
-	cluster0_opp: opp_table0 {
+	cluster0_opp: opp-table-0 {
 		compatible = "operating-points-v2";
 		opp-shared;
 
@@ -69,7 +69,7 @@
 		};
 	};
 
-	cluster1_opp: opp_table1 {
+	cluster1_opp: opp-table-1 {
 		compatible = "operating-points-v2";
 		opp-shared;
 
@@ -2362,7 +2362,8 @@
 				     "renesas,rcar-gen3-sdhi";
 			reg = <0 0xee100000 0 0x2000>;
 			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 314>;
+			clocks = <&cpg CPG_MOD 314>, <&cpg CPG_CORE R8A774E1_CLK_SD0H>;
+			clock-names = "core", "clkh";
 			max-frequency = <200000000>;
 			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
 			resets = <&cpg 314>;
@@ -2375,7 +2376,8 @@
 				     "renesas,rcar-gen3-sdhi";
 			reg = <0 0xee120000 0 0x2000>;
 			interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 313>;
+			clocks = <&cpg CPG_MOD 313>, <&cpg CPG_CORE R8A774E1_CLK_SD1H>;
+			clock-names = "core", "clkh";
 			max-frequency = <200000000>;
 			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
 			resets = <&cpg 313>;
@@ -2388,7 +2390,8 @@
 				     "renesas,rcar-gen3-sdhi";
 			reg = <0 0xee140000 0 0x2000>;
 			interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 312>;
+			clocks = <&cpg CPG_MOD 312>, <&cpg CPG_CORE R8A774E1_CLK_SD2H>;
+			clock-names = "core", "clkh";
 			max-frequency = <200000000>;
 			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
 			resets = <&cpg 312>;
@@ -2401,7 +2404,8 @@
 				     "renesas,rcar-gen3-sdhi";
 			reg = <0 0xee160000 0 0x2000>;
 			interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 311>;
+			clocks = <&cpg CPG_MOD 311>, <&cpg CPG_CORE R8A774E1_CLK_SD3H>;
+			clock-names = "core", "clkh";
 			max-frequency = <200000000>;
 			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
 			resets = <&cpg 311>;
@@ -2904,7 +2908,7 @@
 	};
 
 	thermal-zones {
-		sensor_thermal1: sensor-thermal1 {
+		sensor1_thermal: sensor1-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 			thermal-sensors = <&tsc 0>;
@@ -2919,7 +2923,7 @@
 			};
 		};
 
-		sensor_thermal2: sensor-thermal2 {
+		sensor2_thermal: sensor2-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 			thermal-sensors = <&tsc 1>;
@@ -2934,7 +2938,7 @@
 			};
 		};
 
-		sensor_thermal3: sensor-thermal3 {
+		sensor3_thermal: sensor3-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 			thermal-sensors = <&tsc 2>;
diff --git a/dts/src/arm64/renesas/r8a77951.dtsi b/dts/src/arm64/renesas/r8a77951.dtsi
index 1768a3e6bb..9265a57027 100644
--- a/dts/src/arm64/renesas/r8a77951.dtsi
+++ b/dts/src/arm64/renesas/r8a77951.dtsi
@@ -62,7 +62,7 @@
 		clock-frequency = <0>;
 	};
 
-	cluster0_opp: opp_table0 {
+	cluster0_opp: opp-table-0 {
 		compatible = "operating-points-v2";
 		opp-shared;
 
@@ -96,7 +96,7 @@
 		};
 	};
 
-	cluster1_opp: opp_table1 {
+	cluster1_opp: opp-table-1 {
 		compatible = "operating-points-v2";
 		opp-shared;
 
@@ -2668,7 +2668,8 @@
 				     "renesas,rcar-gen3-sdhi";
 			reg = <0 0xee100000 0 0x2000>;
 			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 314>;
+			clocks = <&cpg CPG_MOD 314>, <&cpg CPG_CORE R8A7795_CLK_SD0H>;
+			clock-names = "core", "clkh";
 			max-frequency = <200000000>;
 			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
 			resets = <&cpg 314>;
@@ -2681,7 +2682,8 @@
 				     "renesas,rcar-gen3-sdhi";
 			reg = <0 0xee120000 0 0x2000>;
 			interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 313>;
+			clocks = <&cpg CPG_MOD 313>, <&cpg CPG_CORE R8A7795_CLK_SD1H>;
+			clock-names = "core", "clkh";
 			max-frequency = <200000000>;
 			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
 			resets = <&cpg 313>;
@@ -2694,7 +2696,8 @@
 				     "renesas,rcar-gen3-sdhi";
 			reg = <0 0xee140000 0 0x2000>;
 			interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 312>;
+			clocks = <&cpg CPG_MOD 312>, <&cpg CPG_CORE R8A7795_CLK_SD2H>;
+			clock-names = "core", "clkh";
 			max-frequency = <200000000>;
 			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
 			resets = <&cpg 312>;
@@ -2707,7 +2710,8 @@
 				     "renesas,rcar-gen3-sdhi";
 			reg = <0 0xee160000 0 0x2000>;
 			interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 311>;
+			clocks = <&cpg CPG_MOD 311>, <&cpg CPG_CORE R8A7795_CLK_SD3H>;
+			clock-names = "core", "clkh";
 			max-frequency = <200000000>;
 			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
 			resets = <&cpg 311>;
@@ -3375,7 +3379,7 @@
 	};
 
 	thermal-zones {
-		sensor_thermal1: sensor-thermal1 {
+		sensor1_thermal: sensor1-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 			thermal-sensors = <&tsc 0>;
@@ -3390,7 +3394,7 @@
 			};
 		};
 
-		sensor_thermal2: sensor-thermal2 {
+		sensor2_thermal: sensor2-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 			thermal-sensors = <&tsc 1>;
@@ -3405,7 +3409,7 @@
 			};
 		};
 
-		sensor_thermal3: sensor-thermal3 {
+		sensor3_thermal: sensor3-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 			thermal-sensors = <&tsc 2>;
diff --git a/dts/src/arm64/renesas/r8a77960.dtsi b/dts/src/arm64/renesas/r8a77960.dtsi
index 2bd8169735..26f7103d11 100644
--- a/dts/src/arm64/renesas/r8a77960.dtsi
+++ b/dts/src/arm64/renesas/r8a77960.dtsi
@@ -57,7 +57,7 @@
 		clock-frequency = <0>;
 	};
 
-	cluster0_opp: opp_table0 {
+	cluster0_opp: opp-table-0 {
 		compatible = "operating-points-v2";
 		opp-shared;
 
@@ -97,7 +97,7 @@
 		};
 	};
 
-	cluster1_opp: opp_table1 {
+	cluster1_opp: opp-table-1 {
 		compatible = "operating-points-v2";
 		opp-shared;
 
@@ -2468,7 +2468,8 @@
 				     "renesas,rcar-gen3-sdhi";
 			reg = <0 0xee100000 0 0x2000>;
 			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 314>;
+			clocks = <&cpg CPG_MOD 314>, <&cpg CPG_CORE R8A7796_CLK_SD0H>;
+			clock-names = "core", "clkh";
 			max-frequency = <200000000>;
 			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
 			resets = <&cpg 314>;
@@ -2481,7 +2482,8 @@
 				     "renesas,rcar-gen3-sdhi";
 			reg = <0 0xee120000 0 0x2000>;
 			interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 313>;
+			clocks = <&cpg CPG_MOD 313>, <&cpg CPG_CORE R8A7796_CLK_SD1H>;
+			clock-names = "core", "clkh";
 			max-frequency = <200000000>;
 			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
 			resets = <&cpg 313>;
@@ -2494,7 +2496,8 @@
 				     "renesas,rcar-gen3-sdhi";
 			reg = <0 0xee140000 0 0x2000>;
 			interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 312>;
+			clocks = <&cpg CPG_MOD 312>, <&cpg CPG_CORE R8A7796_CLK_SD2H>;
+			clock-names = "core", "clkh";
 			max-frequency = <200000000>;
 			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
 			resets = <&cpg 312>;
@@ -2507,7 +2510,8 @@
 				     "renesas,rcar-gen3-sdhi";
 			reg = <0 0xee160000 0 0x2000>;
 			interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 311>;
+			clocks = <&cpg CPG_MOD 311>, <&cpg CPG_CORE R8A7796_CLK_SD3H>;
+			clock-names = "core", "clkh";
 			max-frequency = <200000000>;
 			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
 			resets = <&cpg 311>;
@@ -2972,7 +2976,7 @@
 	};
 
 	thermal-zones {
-		sensor_thermal1: sensor-thermal1 {
+		sensor1_thermal: sensor1-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 			thermal-sensors = <&tsc 0>;
@@ -2987,7 +2991,7 @@
 			};
 		};
 
-		sensor_thermal2: sensor-thermal2 {
+		sensor2_thermal: sensor2-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 			thermal-sensors = <&tsc 1>;
@@ -3002,7 +3006,7 @@
 			};
 		};
 
-		sensor_thermal3: sensor-thermal3 {
+		sensor3_thermal: sensor3-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 			thermal-sensors = <&tsc 2>;
diff --git a/dts/src/arm64/renesas/r8a77961.dtsi b/dts/src/arm64/renesas/r8a77961.dtsi
index 86d59e7e1a..ac9b587f6f 100644
--- a/dts/src/arm64/renesas/r8a77961.dtsi
+++ b/dts/src/arm64/renesas/r8a77961.dtsi
@@ -46,7 +46,7 @@
 		clock-frequency = <0>;
 	};
 
-	cluster0_opp: opp_table0 {
+	cluster0_opp: opp-table-0 {
 		compatible = "operating-points-v2";
 		opp-shared;
 
@@ -86,7 +86,7 @@
 		};
 	};
 
-	cluster1_opp: opp_table1 {
+	cluster1_opp: opp-table-1 {
 		compatible = "operating-points-v2";
 		opp-shared;
 
@@ -2312,7 +2312,8 @@
 				     "renesas,rcar-gen3-sdhi";
 			reg = <0 0xee100000 0 0x2000>;
 			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 314>;
+			clocks = <&cpg CPG_MOD 314>, <&cpg CPG_CORE R8A77961_CLK_SD0H>;
+			clock-names = "core", "clkh";
 			max-frequency = <200000000>;
 			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
 			resets = <&cpg 314>;
@@ -2325,7 +2326,8 @@
 				     "renesas,rcar-gen3-sdhi";
 			reg = <0 0xee120000 0 0x2000>;
 			interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 313>;
+			clocks = <&cpg CPG_MOD 313>, <&cpg CPG_CORE R8A77961_CLK_SD1H>;
+			clock-names = "core", "clkh";
 			max-frequency = <200000000>;
 			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
 			resets = <&cpg 313>;
@@ -2338,7 +2340,8 @@
 				     "renesas,rcar-gen3-sdhi";
 			reg = <0 0xee140000 0 0x2000>;
 			interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 312>;
+			clocks = <&cpg CPG_MOD 312>, <&cpg CPG_CORE R8A77961_CLK_SD2H>;
+			clock-names = "core", "clkh";
 			max-frequency = <200000000>;
 			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
 			resets = <&cpg 312>;
@@ -2351,7 +2354,8 @@
 				     "renesas,rcar-gen3-sdhi";
 			reg = <0 0xee160000 0 0x2000>;
 			interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 311>;
+			clocks = <&cpg CPG_MOD 311>, <&cpg CPG_CORE R8A77961_CLK_SD3H>;
+			clock-names = "core", "clkh";
 			max-frequency = <200000000>;
 			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
 			resets = <&cpg 311>;
@@ -2730,7 +2734,7 @@
 	};
 
 	thermal-zones {
-		sensor_thermal1: sensor-thermal1 {
+		sensor1_thermal: sensor1-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 			thermal-sensors = <&tsc 0>;
@@ -2745,7 +2749,7 @@
 			};
 		};
 
-		sensor_thermal2: sensor-thermal2 {
+		sensor2_thermal: sensor2-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 			thermal-sensors = <&tsc 1>;
@@ -2760,7 +2764,7 @@
 			};
 		};
 
-		sensor_thermal3: sensor-thermal3 {
+		sensor3_thermal: sensor3-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 			thermal-sensors = <&tsc 2>;
diff --git a/dts/src/arm64/renesas/r8a77965.dtsi b/dts/src/arm64/renesas/r8a77965.dtsi
index 08df756064..f898aad72b 100644
--- a/dts/src/arm64/renesas/r8a77965.dtsi
+++ b/dts/src/arm64/renesas/r8a77965.dtsi
@@ -62,7 +62,7 @@
 		clock-frequency = <0>;
 	};
 
-	cluster0_opp: opp_table0 {
+	cluster0_opp: opp-table-0 {
 		compatible = "operating-points-v2";
 		opp-shared;
 
@@ -2315,7 +2315,8 @@
 				     "renesas,rcar-gen3-sdhi";
 			reg = <0 0xee100000 0 0x2000>;
 			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 314>;
+			clocks = <&cpg CPG_MOD 314>, <&cpg CPG_CORE R8A77965_CLK_SD0H>;
+			clock-names = "core", "clkh";
 			max-frequency = <200000000>;
 			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
 			resets = <&cpg 314>;
@@ -2328,7 +2329,8 @@
 				     "renesas,rcar-gen3-sdhi";
 			reg = <0 0xee120000 0 0x2000>;
 			interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 313>;
+			clocks = <&cpg CPG_MOD 313>, <&cpg CPG_CORE R8A77965_CLK_SD1H>;
+			clock-names = "core", "clkh";
 			max-frequency = <200000000>;
 			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
 			resets = <&cpg 313>;
@@ -2341,7 +2343,8 @@
 				     "renesas,rcar-gen3-sdhi";
 			reg = <0 0xee140000 0 0x2000>;
 			interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 312>;
+			clocks = <&cpg CPG_MOD 312>, <&cpg CPG_CORE R8A77965_CLK_SD2H>;
+			clock-names = "core", "clkh";
 			max-frequency = <200000000>;
 			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
 			resets = <&cpg 312>;
@@ -2354,7 +2357,8 @@
 				     "renesas,rcar-gen3-sdhi";
 			reg = <0 0xee160000 0 0x2000>;
 			interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 311>;
+			clocks = <&cpg CPG_MOD 311>, <&cpg CPG_CORE R8A77965_CLK_SD3H>;
+			clock-names = "core", "clkh";
 			max-frequency = <200000000>;
 			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
 			resets = <&cpg 311>;
@@ -2784,7 +2788,7 @@
 	};
 
 	thermal-zones {
-		sensor_thermal1: sensor-thermal1 {
+		sensor1_thermal: sensor1-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 			thermal-sensors = <&tsc 0>;
@@ -2799,7 +2803,7 @@
 			};
 		};
 
-		sensor_thermal2: sensor-thermal2 {
+		sensor2_thermal: sensor2-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 			thermal-sensors = <&tsc 1>;
@@ -2814,7 +2818,7 @@
 			};
 		};
 
-		sensor_thermal3: sensor-thermal3 {
+		sensor3_thermal: sensor3-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 			thermal-sensors = <&tsc 2>;
diff --git a/dts/src/arm64/renesas/r8a77980.dtsi b/dts/src/arm64/renesas/r8a77980.dtsi
index 6347d15e66..347c068ff2 100644
--- a/dts/src/arm64/renesas/r8a77980.dtsi
+++ b/dts/src/arm64/renesas/r8a77980.dtsi
@@ -1339,7 +1339,8 @@
 				     "renesas,rcar-gen3-sdhi";
 			reg = <0 0xee140000 0 0x2000>;
 			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 314>;
+			clocks = <&cpg CPG_MOD 314>, <&cpg CPG_CORE R8A77980_CLK_SD0H>;
+			clock-names = "core", "clkh";
 			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
 			resets = <&cpg 314>;
 			max-frequency = <200000000>;
@@ -1580,7 +1581,7 @@
 	};
 
 	thermal-zones {
-		thermal-sensor-1 {
+		sensor1_thermal: sensor1-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 			thermal-sensors = <&tsc 0>;
@@ -1599,7 +1600,7 @@
 			};
 		};
 
-		thermal-sensor-2 {
+		sensor2_thermal: sensor2-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 			thermal-sensors = <&tsc 1>;
diff --git a/dts/src/arm64/renesas/r8a77990.dtsi b/dts/src/arm64/renesas/r8a77990.dtsi
index 0ea300a814..14caedd0c9 100644
--- a/dts/src/arm64/renesas/r8a77990.dtsi
+++ b/dts/src/arm64/renesas/r8a77990.dtsi
@@ -55,7 +55,7 @@
 		clock-frequency = <0>;
 	};
 
-	cluster1_opp: opp_table10 {
+	cluster1_opp: opp-table-1 {
 		compatible = "operating-points-v2";
 		opp-shared;
 		opp-800000000 {
@@ -1788,7 +1788,8 @@
 				     "renesas,rcar-gen3-sdhi";
 			reg = <0 0xee100000 0 0x2000>;
 			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 314>;
+			clocks = <&cpg CPG_MOD 314>, <&cpg CPG_CORE R8A77990_CLK_SD0H>;
+			clock-names = "core", "clkh";
 			max-frequency = <200000000>;
 			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
 			resets = <&cpg 314>;
@@ -1801,7 +1802,8 @@
 				     "renesas,rcar-gen3-sdhi";
 			reg = <0 0xee120000 0 0x2000>;
 			interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 313>;
+			clocks = <&cpg CPG_MOD 313>, <&cpg CPG_CORE R8A77990_CLK_SD1H>;
+			clock-names = "core", "clkh";
 			max-frequency = <200000000>;
 			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
 			resets = <&cpg 313>;
@@ -1814,7 +1816,8 @@
 				     "renesas,rcar-gen3-sdhi";
 			reg = <0 0xee160000 0 0x2000>;
 			interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 311>;
+			clocks = <&cpg CPG_MOD 311>, <&cpg CPG_CORE R8A77990_CLK_SD3H>;
+			clock-names = "core", "clkh";
 			max-frequency = <200000000>;
 			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
 			resets = <&cpg 311>;
diff --git a/dts/src/arm64/renesas/r8a77995.dtsi b/dts/src/arm64/renesas/r8a77995.dtsi
index 16ad5fc23a..f29f3982a4 100644
--- a/dts/src/arm64/renesas/r8a77995.dtsi
+++ b/dts/src/arm64/renesas/r8a77995.dtsi
@@ -1216,7 +1216,8 @@
 				     "renesas,rcar-gen3-sdhi";
 			reg = <0 0xee140000 0 0x2000>;
 			interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 312>;
+			clocks = <&cpg CPG_MOD 312>, <&cpg CPG_CORE R8A77995_CLK_SD0H>;
+			clock-names = "core", "clkh";
 			max-frequency = <200000000>;
 			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
 			resets = <&cpg 312>;
diff --git a/dts/src/arm64/renesas/r8a779a0-falcon-cpu.dtsi b/dts/src/arm64/renesas/r8a779a0-falcon-cpu.dtsi
index cd2f0d60f2..6af3f4f4f2 100644
--- a/dts/src/arm64/renesas/r8a779a0-falcon-cpu.dtsi
+++ b/dts/src/arm64/renesas/r8a779a0-falcon-cpu.dtsi
@@ -98,6 +98,27 @@
 		reg = <0x7 0x00000000 0x0 0x80000000>;
 	};
 
+	mini-dp-con {
+		compatible = "dp-connector";
+		label = "CN5";
+		type = "mini";
+
+		port {
+			mini_dp_con_in: endpoint {
+				remote-endpoint = <&sn65dsi86_out>;
+			};
+		};
+	};
+
+	reg_1p2v: regulator-1p2v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.2V";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
 	reg_1p8v: regulator-1p8v {
 		compatible = "regulator-fixed";
 		regulator-name = "fixed-1.8V";
@@ -115,6 +136,29 @@
 		regulator-boot-on;
 		regulator-always-on;
 	};
+
+	sn65dsi86_refclk: clk-x6 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <38400000>;
+	};
+};
+
+&dsi0 {
+	status = "okay";
+
+	ports {
+		port@1 {
+			dsi0_out: endpoint {
+				remote-endpoint = <&sn65dsi86_in>;
+				data-lanes = <1 2 3 4>;
+			};
+		};
+	};
+};
+
+&du {
+	status = "okay";
 };
 
 &extal_clk {
@@ -146,6 +190,41 @@
 
 	status = "okay";
 	clock-frequency = <400000>;
+
+	bridge@2c {
+		compatible = "ti,sn65dsi86";
+		reg = <0x2c>;
+
+		clocks = <&sn65dsi86_refclk>;
+		clock-names = "refclk";
+
+		interrupt-parent = <&gpio1>;
+		interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
+
+		vccio-supply = <&reg_1p8v>;
+		vpll-supply = <&reg_1p8v>;
+		vcca-supply = <&reg_1p2v>;
+		vcc-supply = <&reg_1p2v>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				sn65dsi86_in: endpoint {
+					remote-endpoint = <&dsi0_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				sn65dsi86_out: endpoint {
+					remote-endpoint = <&mini_dp_con_in>;
+				};
+			};
+		};
+	};
 };
 
 &i2c6 {
diff --git a/dts/src/arm64/renesas/r8a779a0.dtsi b/dts/src/arm64/renesas/r8a779a0.dtsi
index 43bf2cbfbd..1e7ed12ebc 100644
--- a/dts/src/arm64/renesas/r8a779a0.dtsi
+++ b/dts/src/arm64/renesas/r8a779a0.dtsi
@@ -87,7 +87,7 @@
 			status = "disabled";
 		};
 
-		pfc: pin-controller@e6050000 {
+		pfc: pinctrl@e6050000 {
 			compatible = "renesas,pfc-r8a779a0";
 			reg = <0 0xe6050000 0 0x16c>, <0 0xe6050800 0 0x16c>,
 			      <0 0xe6058000 0 0x16c>, <0 0xe6058800 0 0x16c>,
@@ -1993,7 +1993,8 @@
 				     "renesas,rcar-gen3-sdhi";
 			reg = <0 0xee140000 0 0x2000>;
 			interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 706>;
+			clocks = <&cpg CPG_MOD 706>, <&cpg CPG_CORE R8A779A0_CLK_SD0H>;
+			clock-names = "core", "clkh";
 			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
 			resets = <&cpg 706>;
 			max-frequency = <200000000>;
@@ -2268,6 +2269,40 @@
 			};
 		};
 
+		du: display@feb00000 {
+			compatible = "renesas,du-r8a779a0";
+			reg = <0 0xfeb00000 0 0x40000>;
+			interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 411>;
+			clock-names = "du.0";
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 411>;
+			reset-names = "du.0";
+			renesas,vsps = <&vspd0 0>, <&vspd1 0>;
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					du_out_dsi0: endpoint {
+						remote-endpoint = <&dsi0_in>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					du_out_dsi1: endpoint {
+						remote-endpoint = <&dsi1_in>;
+					};
+				};
+			};
+		};
+
 		isp0: isp@fed00000 {
 			compatible = "renesas,r8a779a0-isp";
 			reg = <0 0xfed00000 0 0x10000>;
@@ -2600,6 +2635,62 @@
 			};
 		};
 
+		dsi0: dsi-encoder@fed80000 {
+			compatible = "renesas,r8a779a0-dsi-csi2-tx";
+			reg = <0 0xfed80000 0 0x10000>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			clocks = <&cpg CPG_MOD 415>,
+				 <&cpg CPG_CORE R8A779A0_CLK_DSI>,
+				 <&cpg CPG_CORE R8A779A0_CLK_CL16MCK>;
+			clock-names = "fck", "dsi", "pll";
+			resets = <&cpg 415>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					dsi0_in: endpoint {
+						remote-endpoint = <&du_out_dsi0>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		dsi1: dsi-encoder@fed90000 {
+			compatible = "renesas,r8a779a0-dsi-csi2-tx";
+			reg = <0 0xfed90000 0 0x10000>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			clocks = <&cpg CPG_MOD 416>,
+				 <&cpg CPG_CORE R8A779A0_CLK_DSI>,
+				 <&cpg CPG_CORE R8A779A0_CLK_CL16MCK>;
+			clock-names = "fck", "dsi", "pll";
+			resets = <&cpg 416>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					dsi1_in: endpoint {
+						remote-endpoint = <&du_out_dsi1>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
 		prr: chipid@fff00044 {
 			compatible = "renesas,prr";
 			reg = <0 0xfff00044 0 4>;
@@ -2607,7 +2698,7 @@
 	};
 
 	thermal-zones {
-		sensor_thermal1: sensor-thermal1 {
+		sensor1_thermal: sensor1-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 			thermal-sensors = <&tsc 0>;
@@ -2621,7 +2712,7 @@
 			};
 		};
 
-		sensor_thermal2: sensor-thermal2 {
+		sensor2_thermal: sensor2-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 			thermal-sensors = <&tsc 1>;
@@ -2635,7 +2726,7 @@
 			};
 		};
 
-		sensor_thermal3: sensor-thermal3 {
+		sensor3_thermal: sensor3-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 			thermal-sensors = <&tsc 2>;
@@ -2649,7 +2740,7 @@
 			};
 		};
 
-		sensor_thermal4: sensor-thermal4 {
+		sensor4_thermal: sensor4-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 			thermal-sensors = <&tsc 3>;
@@ -2663,7 +2754,7 @@
 			};
 		};
 
-		sensor_thermal5: sensor-thermal5 {
+		sensor5_thermal: sensor5-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 			thermal-sensors = <&tsc 4>;
diff --git a/dts/src/arm64/renesas/r8a779f0-spider-cpu.dtsi b/dts/src/arm64/renesas/r8a779f0-spider-cpu.dtsi
new file mode 100644
index 0000000000..156586532c
--- /dev/null
+++ b/dts/src/arm64/renesas/r8a779f0-spider-cpu.dtsi
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: (GPL-2.0 or MIT)
+/*
+ * Device Tree Source for the Spider CPU board
+ *
+ * Copyright (C) 2021 Renesas Electronics Corp.
+ */
+
+#include "r8a779f0.dtsi"
+
+/ {
+	model = "Renesas Spider CPU board";
+	compatible = "renesas,spider-cpu", "renesas,r8a779f0";
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x78000000>;
+	};
+
+	memory@480000000 {
+		device_type = "memory";
+		reg = <0x4 0x80000000 0x0 0x80000000>;
+	};
+};
+
+&extal_clk {
+	clock-frequency = <20000000>;
+};
+
+&extalr_clk {
+	clock-frequency = <32768>;
+};
+
+&scif3 {
+	status = "okay";
+};
diff --git a/dts/src/arm64/renesas/r8a779f0-spider.dts b/dts/src/arm64/renesas/r8a779f0-spider.dts
new file mode 100644
index 0000000000..f286254b41
--- /dev/null
+++ b/dts/src/arm64/renesas/r8a779f0-spider.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: (GPL-2.0 or MIT)
+/*
+ * Device Tree Source for the Spider CPU and BreakOut boards
+ *
+ * Copyright (C) 2021 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r8a779f0-spider-cpu.dtsi"
+
+/ {
+	model = "Renesas Spider CPU and Breakout boards based on r8a779f0";
+	compatible = "renesas,spider-breakout", "renesas,spider-cpu", "renesas,r8a779f0";
+
+	aliases {
+		serial0 = &scif3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
diff --git a/dts/src/arm64/renesas/r8a779f0.dtsi b/dts/src/arm64/renesas/r8a779f0.dtsi
new file mode 100644
index 0000000000..eda597766e
--- /dev/null
+++ b/dts/src/arm64/renesas/r8a779f0.dtsi
@@ -0,0 +1,121 @@
+// SPDX-License-Identifier: (GPL-2.0 or MIT)
+/*
+ * Device Tree Source for the R-Car S4-8 (R8A779F0) SoC
+ *
+ * Copyright (C) 2021 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/clock/r8a779f0-cpg-mssr.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/r8a779f0-sysc.h>
+
+/ {
+	compatible = "renesas,r8a779f0";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		a55_0: cpu@0 {
+			compatible = "arm,cortex-a55";
+			reg = <0>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A779F0_PD_A1E0D0C0>;
+		};
+	};
+
+	extal_clk: extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	extalr_clk: extalr {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	pmu_a55 {
+		compatible = "arm,cortex-a55-pmu";
+		interrupts-extended = <&gic GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	/* External SCIF clock - to be overridden by boards that provide it */
+	scif_clk: scif {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		cpg: clock-controller@e6150000 {
+			compatible = "renesas,r8a779f0-cpg-mssr";
+			reg = <0 0xe6150000 0 0x4000>;
+			clocks = <&extal_clk>, <&extalr_clk>;
+			clock-names = "extal", "extalr";
+			#clock-cells = <2>;
+			#power-domain-cells = <0>;
+			#reset-cells = <1>;
+		};
+
+		rst: reset-controller@e6160000 {
+			compatible = "renesas,r8a779f0-rst";
+			reg = <0 0xe6160000 0 0x4000>;
+		};
+
+		sysc: system-controller@e6180000 {
+			compatible = "renesas,r8a779f0-sysc";
+			reg = <0 0xe6180000 0 0x4000>;
+			#power-domain-cells = <1>;
+		};
+
+		scif3: serial@e6c50000 {
+			compatible = "renesas,scif-r8a779f0",
+				     "renesas,rcar-gen4-scif", "renesas,scif";
+			reg = <0 0xe6c50000 0 64>;
+			interrupts = <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 704>,
+				 <&cpg CPG_CORE R8A779F0_CLK_S0D3_PER>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+			resets = <&cpg 704>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@f1000000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x0 0xf1000000 0 0x20000>,
+			      <0x0 0xf1060000 0 0x110000>;
+			interrupts = <GIC_PPI 9
+				      (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		prr: chipid@fff00044 {
+			compatible = "renesas,prr";
+			reg = <0 0xfff00044 0 4>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
diff --git a/dts/src/arm64/renesas/r9a07g044.dtsi b/dts/src/arm64/renesas/r9a07g044.dtsi
index 485ef5f0fe..19287cccb1 100644
--- a/dts/src/arm64/renesas/r9a07g044.dtsi
+++ b/dts/src/arm64/renesas/r9a07g044.dtsi
@@ -42,9 +42,31 @@
 		clock-frequency = <0>;
 	};
 
-	psci {
-		compatible = "arm,psci-1.0", "arm,psci-0.2";
-		method = "smc";
+	cluster0_opp: opp-table-0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-150000000 {
+			opp-hz = /bits/ 64 <150000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <300000>;
+			opp-suspend;
+		};
 	};
 
 	cpus {
@@ -66,8 +88,11 @@
 			compatible = "arm,cortex-a55";
 			reg = <0>;
 			device_type = "cpu";
+			#cooling-cells = <2>;
 			next-level-cache = <&L3_CA55>;
 			enable-method = "psci";
+			clocks = <&cpg CPG_CORE R9A07G044_CLK_I>;
+			operating-points-v2 = <&cluster0_opp>;
 		};
 
 		cpu1: cpu@100 {
@@ -76,6 +101,8 @@
 			device_type = "cpu";
 			next-level-cache = <&L3_CA55>;
 			enable-method = "psci";
+			clocks = <&cpg CPG_CORE R9A07G044_CLK_I>;
+			operating-points-v2 = <&cluster0_opp>;
 		};
 
 		L3_CA55: cache-controller-0 {
@@ -85,6 +112,55 @@
 		};
 	};
 
+	gpu_opp_table: opp-table-1 {
+		compatible = "operating-points-v2";
+
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <1100000>;
+		};
+
+		opp-400000000 {
+			opp-hz = /bits/ 64 <400000000>;
+			opp-microvolt = <1100000>;
+		};
+
+		opp-250000000 {
+			opp-hz = /bits/ 64 <250000000>;
+			opp-microvolt = <1100000>;
+		};
+
+		opp-200000000 {
+			opp-hz = /bits/ 64 <200000000>;
+			opp-microvolt = <1100000>;
+		};
+
+		opp-125000000 {
+			opp-hz = /bits/ 64 <125000000>;
+			opp-microvolt = <1100000>;
+		};
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+			opp-microvolt = <1100000>;
+		};
+
+		opp-62500000 {
+			opp-hz = /bits/ 64 <62500000>;
+			opp-microvolt = <1100000>;
+		};
+
+		opp-50000000 {
+			opp-hz = /bits/ 64 <50000000>;
+			opp-microvolt = <1100000>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0", "arm,psci-0.2";
+		method = "smc";
+	};
+
 	soc: soc {
 		compatible = "simple-bus";
 		interrupt-parent = <&gic>;
@@ -176,6 +252,54 @@
 			status = "disabled";
 		};
 
+		spi0: spi@1004ac00 {
+			compatible = "renesas,r9a07g044-rspi", "renesas,rspi-rz";
+			reg = <0 0x1004ac00 0 0x400>;
+			interrupts = <GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error", "rx", "tx";
+			clocks = <&cpg CPG_MOD R9A07G044_RSPI0_CLKB>;
+			resets = <&cpg R9A07G044_RSPI0_RST>;
+			power-domains = <&cpg>;
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi1: spi@1004b000 {
+			compatible = "renesas,r9a07g044-rspi", "renesas,rspi-rz";
+			reg = <0 0x1004b000 0 0x400>;
+			interrupts = <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error", "rx", "tx";
+			clocks = <&cpg CPG_MOD R9A07G044_RSPI1_CLKB>;
+			resets = <&cpg R9A07G044_RSPI1_RST>;
+			power-domains = <&cpg>;
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi2: spi@1004b400 {
+			compatible = "renesas,r9a07g044-rspi", "renesas,rspi-rz";
+			reg = <0 0x1004b400 0 0x400>;
+			interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error", "rx", "tx";
+			clocks = <&cpg CPG_MOD R9A07G044_RSPI2_CLKB>;
+			resets = <&cpg R9A07G044_RSPI2_RST>;
+			power-domains = <&cpg>;
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		scif0: serial@1004b800 {
 			compatible = "renesas,scif-r9a07g044";
 			reg = <0 0x1004b800 0 0x400>;
@@ -194,6 +318,108 @@
 			status = "disabled";
 		};
 
+		scif1: serial@1004bc00 {
+			compatible = "renesas,scif-r9a07g044";
+			reg = <0 0x1004bc00 0 0x400>;
+			interrupts = <GIC_SPI 385 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 387 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 388 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 386 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi",
+					  "bri", "dri", "tei";
+			clocks = <&cpg CPG_MOD R9A07G044_SCIF1_CLK_PCK>;
+			clock-names = "fck";
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G044_SCIF1_RST_SYSTEM_N>;
+			status = "disabled";
+		};
+
+		scif2: serial@1004c000 {
+			compatible = "renesas,scif-r9a07g044";
+			reg = <0 0x1004c000 0 0x400>;
+			interrupts = <GIC_SPI 390 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 392 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 391 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi",
+					  "bri", "dri", "tei";
+			clocks = <&cpg CPG_MOD R9A07G044_SCIF2_CLK_PCK>;
+			clock-names = "fck";
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G044_SCIF2_RST_SYSTEM_N>;
+			status = "disabled";
+		};
+
+		scif3: serial@1004c400 {
+			compatible = "renesas,scif-r9a07g044";
+			reg = <0 0x1004c400 0 0x400>;
+			interrupts = <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi",
+					  "bri", "dri", "tei";
+			clocks = <&cpg CPG_MOD R9A07G044_SCIF3_CLK_PCK>;
+			clock-names = "fck";
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G044_SCIF3_RST_SYSTEM_N>;
+			status = "disabled";
+		};
+
+		scif4: serial@1004c800 {
+			compatible = "renesas,scif-r9a07g044";
+			reg = <0 0x1004c800 0 0x400>;
+			interrupts = <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi",
+					  "bri", "dri", "tei";
+			clocks = <&cpg CPG_MOD R9A07G044_SCIF4_CLK_PCK>;
+			clock-names = "fck";
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G044_SCIF4_RST_SYSTEM_N>;
+			status = "disabled";
+		};
+
+		sci0: serial@1004d000 {
+			compatible = "renesas,r9a07g044-sci", "renesas,sci";
+			reg = <0 0x1004d000 0 0x400>;
+			interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi", "tei";
+			clocks = <&cpg CPG_MOD R9A07G044_SCI0_CLKP>;
+			clock-names = "fck";
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G044_SCI0_RST>;
+			status = "disabled";
+		};
+
+		sci1: serial@1004d400 {
+			compatible = "renesas,r9a07g044-sci", "renesas,sci";
+			reg = <0 0x1004d400 0 0x400>;
+			interrupts = <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 411 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi", "tei";
+			clocks = <&cpg CPG_MOD R9A07G044_SCI1_CLKP>;
+			clock-names = "fck";
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G044_SCI1_RST>;
+			status = "disabled";
+		};
+
 		canfd: can@10050000 {
 			compatible = "renesas,r9a07g044-canfd", "renesas,rzg2l-canfd";
 			reg = <0 0x10050000 0 0x8000>;
@@ -358,6 +584,16 @@
 			};
 		};
 
+		tsu: thermal@10059400 {
+			compatible = "renesas,r9a07g044-tsu",
+				     "renesas,rzg2l-tsu";
+			reg = <0 0x10059400 0 0x400>;
+			clocks = <&cpg CPG_MOD R9A07G044_TSU_PCLK>;
+			resets = <&cpg R9A07G044_TSU_PRESETN>;
+			power-domains = <&cpg>;
+			#thermal-sensor-cells = <1>;
+		};
+
 		sbc: spi@10060000 {
 			compatible = "renesas,r9a07g044-rpc-if",
 				     "renesas,rzg2l-rpc-if";
@@ -397,7 +633,7 @@
 			status = "disabled";
 		};
 
-		pinctrl: pin-controller@11030000 {
+		pinctrl: pinctrl@11030000 {
 			compatible = "renesas,r9a07g044-pinctrl";
 			reg = <0 0x11030000 0 0x10000>;
 			gpio-controller;
@@ -446,6 +682,27 @@
 			dma-channels = <16>;
 		};
 
+		gpu: gpu@11840000 {
+			compatible = "renesas,r9a07g044-mali",
+				     "arm,mali-bifrost";
+			reg = <0x0 0x11840000 0x0 0x10000>;
+			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "job", "mmu", "gpu", "event";
+			clocks = <&cpg CPG_MOD R9A07G044_GPU_CLK>,
+				 <&cpg CPG_MOD R9A07G044_GPU_AXI_CLK>,
+				 <&cpg CPG_MOD R9A07G044_GPU_ACE_CLK>;
+			clock-names = "gpu", "bus", "bus_ace";
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G044_GPU_RESETN>,
+				 <&cpg R9A07G044_GPU_AXI_RESETN>,
+				 <&cpg R9A07G044_GPU_ACE_RESETN>;
+			reset-names = "rst", "axi_rst", "ace_rst";
+			operating-points-v2 = <&gpu_opp_table>;
+		};
+
 		gic: interrupt-controller@11900000 {
 			compatible = "arm,gic-v3";
 			#interrupt-cells = <3>;
@@ -463,10 +720,10 @@
 			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD R9A07G044_SDHI0_IMCLK>,
-				 <&cpg CPG_MOD R9A07G044_SDHI0_IMCLK2>,
 				 <&cpg CPG_MOD R9A07G044_SDHI0_CLK_HS>,
+				 <&cpg CPG_MOD R9A07G044_SDHI0_IMCLK2>,
 				 <&cpg CPG_MOD R9A07G044_SDHI0_ACLK>;
-			clock-names = "imclk", "imclk2", "clk_hs", "aclk";
+			clock-names = "core", "clkh", "cd", "aclk";
 			resets = <&cpg R9A07G044_SDHI0_IXRST>;
 			power-domains = <&cpg>;
 			status = "disabled";
@@ -479,10 +736,10 @@
 			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD R9A07G044_SDHI1_IMCLK>,
-				 <&cpg CPG_MOD R9A07G044_SDHI1_IMCLK2>,
 				 <&cpg CPG_MOD R9A07G044_SDHI1_CLK_HS>,
+				 <&cpg CPG_MOD R9A07G044_SDHI1_IMCLK2>,
 				 <&cpg CPG_MOD R9A07G044_SDHI1_ACLK>;
-			clock-names = "imclk", "imclk2", "clk_hs", "aclk";
+			clock-names = "core", "clkh", "cd", "aclk";
 			resets = <&cpg R9A07G044_SDHI1_IXRST>;
 			power-domains = <&cpg>;
 			status = "disabled";
@@ -641,6 +898,115 @@
 			power-domains = <&cpg>;
 			status = "disabled";
 		};
+
+		wdt0: watchdog@12800800 {
+			compatible = "renesas,r9a07g044-wdt",
+				     "renesas,rzg2l-wdt";
+			reg = <0 0x12800800 0 0x400>;
+			clocks = <&cpg CPG_MOD R9A07G044_WDT0_PCLK>,
+				 <&cpg CPG_MOD R9A07G044_WDT0_CLK>;
+			clock-names = "pclk", "oscclk";
+			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "wdt", "perrout";
+			resets = <&cpg R9A07G044_WDT0_PRESETN>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		wdt1: watchdog@12800c00 {
+			compatible = "renesas,r9a07g044-wdt",
+				     "renesas,rzg2l-wdt";
+			reg = <0 0x12800C00 0 0x400>;
+			clocks = <&cpg CPG_MOD R9A07G044_WDT1_PCLK>,
+				 <&cpg CPG_MOD R9A07G044_WDT1_CLK>;
+			clock-names = "pclk", "oscclk";
+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "wdt", "perrout";
+			resets = <&cpg R9A07G044_WDT1_PRESETN>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		wdt2: watchdog@12800400 {
+			compatible = "renesas,r9a07g044-wdt",
+				     "renesas,rzg2l-wdt";
+			reg = <0 0x12800400 0 0x400>;
+			clocks = <&cpg CPG_MOD R9A07G044_WDT2_PCLK>,
+				 <&cpg CPG_MOD R9A07G044_WDT2_CLK>;
+			clock-names = "pclk", "oscclk";
+			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "wdt", "perrout";
+			resets = <&cpg R9A07G044_WDT2_PRESETN>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		ostm0: timer@12801000 {
+			compatible = "renesas,r9a07g044-ostm",
+				     "renesas,ostm";
+			reg = <0x0 0x12801000 0x0 0x400>;
+			interrupts = <GIC_SPI 46 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&cpg CPG_MOD R9A07G044_OSTM0_PCLK>;
+			resets = <&cpg R9A07G044_OSTM0_PRESETZ>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		ostm1: timer@12801400 {
+			compatible = "renesas,r9a07g044-ostm",
+				     "renesas,ostm";
+			reg = <0x0 0x12801400 0x0 0x400>;
+			interrupts = <GIC_SPI 47 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&cpg CPG_MOD R9A07G044_OSTM1_PCLK>;
+			resets = <&cpg R9A07G044_OSTM1_PRESETZ>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		ostm2: timer@12801800 {
+			compatible = "renesas,r9a07g044-ostm",
+				     "renesas,ostm";
+			reg = <0x0 0x12801800 0x0 0x400>;
+			interrupts = <GIC_SPI 48 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&cpg CPG_MOD R9A07G044_OSTM2_PCLK>;
+			resets = <&cpg R9A07G044_OSTM2_PRESETZ>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsu 0>;
+			sustainable-power = <717>;
+
+			cooling-maps {
+				map0 {
+					trip = <&target>;
+					cooling-device = <&cpu0 0 2>;
+					contribution = <1024>;
+				};
+			};
+
+			trips {
+				sensor_crit: sensor-crit {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+
+				target: trip-point {
+					temperature = <100000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
 	};
 
 	timer {
diff --git a/dts/src/arm64/renesas/rzg2l-smarc-som.dtsi b/dts/src/arm64/renesas/rzg2l-smarc-som.dtsi
index 7e84a29ddd..9112e79079 100644
--- a/dts/src/arm64/renesas/rzg2l-smarc-som.dtsi
+++ b/dts/src/arm64/renesas/rzg2l-smarc-som.dtsi
@@ -52,6 +52,15 @@
 		regulator-always-on;
 	};
 
+	reg_1p1v: regulator-vdd-core {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.1V";
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
 	vccq_sdhi0: regulator-vccq-sdhi0 {
 		compatible = "regulator-gpio";
 
@@ -130,6 +139,18 @@
 	clock-frequency = <24000000>;
 };
 
+&gpu {
+	mali-supply = <&reg_1p1v>;
+};
+
+&ostm1 {
+	status = "okay";
+};
+
+&ostm2 {
+	status = "okay";
+};
+
 &pinctrl {
 	adc_pins: adc {
 		pinmux = <RZG2L_PORT_PINMUX(9, 0, 2)>; /* ADC_TRG */
@@ -178,6 +199,18 @@
 		line-name = "gpio_sd0_pwr_en";
 	};
 
+	qspi0_pins: qspi0 {
+		qspi0-data {
+			pins = "QSPI0_IO0", "QSPI0_IO1", "QSPI0_IO2", "QSPI0_IO3";
+			power-source = <1800>;
+		};
+
+		qspi0-ctrl {
+			pins = "QSPI0_SPCLK", "QSPI0_SSL", "QSPI_RESET#";
+			power-source = <1800>;
+		};
+	};
+
 	/*
 	 * SD0 device selection is XOR between GPIO_SD0_DEV_SEL and SW1[2]
 	 * The below switch logic can be used to select the device between
@@ -243,6 +276,34 @@
 	};
 };
 
+&sbc {
+	pinctrl-0 = <&qspi0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	flash@0 {
+		compatible = "micron,mt25qu512a", "jedec,spi-nor";
+		reg = <0>;
+		m25p,fast-read;
+		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			boot@0 {
+				reg = <0x00000000 0x2000000>;
+				read-only;
+			};
+			user@2000000 {
+				reg = <0x2000000 0x2000000>;
+			};
+		};
+	};
+};
+
 #if SDHI
 &sdhi0 {
 	pinctrl-0 = <&sdhi0_pins>;
@@ -273,3 +334,18 @@
 	status = "okay";
 };
 #endif
+
+&wdt0 {
+	status = "okay";
+	timeout-sec = <60>;
+};
+
+&wdt1 {
+	status = "okay";
+	timeout-sec = <60>;
+};
+
+&wdt2 {
+	status = "okay";
+	timeout-sec = <60>;
+};
diff --git a/dts/src/arm64/renesas/rzg2l-smarc.dtsi b/dts/src/arm64/renesas/rzg2l-smarc.dtsi
index 2863e487a6..6f2a8bdfa2 100644
--- a/dts/src/arm64/renesas/rzg2l-smarc.dtsi
+++ b/dts/src/arm64/renesas/rzg2l-smarc.dtsi
@@ -21,9 +21,13 @@
  *
  */
 
+/* comment the #define statement to disable SCIF2 (SER0) on PMOD1 (CN7) */
+#define PMOD1_SER0	1
+
 / {
 	aliases {
 		serial0 = &scif0;
+		serial1 = &scif2;
 		i2c0 = &i2c0;
 		i2c1 = &i2c1;
 		i2c3 = &i2c3;
@@ -208,6 +212,13 @@
 			 <RZG2L_PORT_PINMUX(38, 1, 1)>;	/* RxD */
 	};
 
+	scif2_pins: scif2 {
+		pinmux = <RZG2L_PORT_PINMUX(48, 0, 1)>, /* TxD */
+			 <RZG2L_PORT_PINMUX(48, 1, 1)>, /* RxD */
+			 <RZG2L_PORT_PINMUX(48, 3, 1)>, /* CTS# */
+			 <RZG2L_PORT_PINMUX(48, 4, 1)>; /* RTS# */
+	};
+
 	sd1-pwr-en-hog {
 		gpio-hog;
 		gpios = <RZG2L_GPIO(39, 2) GPIO_ACTIVE_HIGH>;
@@ -252,6 +263,13 @@
 		input-enable;
 	};
 
+	spi1_pins: spi1 {
+		pinmux = <RZG2L_PORT_PINMUX(44, 0, 1)>, /* CK */
+			 <RZG2L_PORT_PINMUX(44, 1, 1)>, /* MOSI */
+			 <RZG2L_PORT_PINMUX(44, 2, 1)>, /* MISO */
+			 <RZG2L_PORT_PINMUX(44, 3, 1)>; /* SSL */
+	};
+
 	ssi0_pins: ssi0 {
 		pinmux = <RZG2L_PORT_PINMUX(45, 0, 1)>, /* BCK */
 			 <RZG2L_PORT_PINMUX(45, 1, 1)>, /* RCK */
@@ -277,6 +295,23 @@
 	status = "okay";
 };
 
+/*
+ * To enable SCIF2 (SER0) on PMOD1 (CN7)
+ * SW1 should be at position 2->3 so that SER0_CTS# line is activated
+ * SW2 should be at position 2->3 so that SER0_TX line is activated
+ * SW3 should be at position 2->3 so that SER0_RX line is activated
+ * SW4 should be at position 2->3 so that SER0_RTS# line is activated
+ */
+#if PMOD1_SER0
+&scif2 {
+	pinctrl-0 = <&scif2_pins>;
+	pinctrl-names = "default";
+
+	uart-has-rtscts;
+	status = "okay";
+};
+#endif
+
 &sdhi1 {
 	pinctrl-0 = <&sdhi1_pins>;
 	pinctrl-1 = <&sdhi1_pins_uhs>;
@@ -290,6 +325,13 @@
 	status = "okay";
 };
 
+&spi1 {
+	pinctrl-0 = <&spi1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
 &ssi0 {
 	pinctrl-0 = <&ssi0_pins>;
 	pinctrl-names = "default";
diff --git a/dts/src/arm64/renesas/salvator-common.dtsi b/dts/src/arm64/renesas/salvator-common.dtsi
index bf37777dca..6092dc4531 100644
--- a/dts/src/arm64/renesas/salvator-common.dtsi
+++ b/dts/src/arm64/renesas/salvator-common.dtsi
@@ -97,6 +97,7 @@
 
 		port {
 			hdmi0_con: endpoint {
+				remote-endpoint = <&rcar_dw_hdmi0_out>;
 			};
 		};
 	};
@@ -424,10 +425,6 @@
 	};
 };
 
-&hdmi0_con {
-	remote-endpoint = <&rcar_dw_hdmi0_out>;
-};
-
 #ifdef SOC_HAS_HDMI1
 &hdmi1 {
 	status = "okay";
diff --git a/dts/src/arm64/renesas/ulcb.dtsi b/dts/src/arm64/renesas/ulcb.dtsi
index 7edffe7f8c..a7e93df4ce 100644
--- a/dts/src/arm64/renesas/ulcb.dtsi
+++ b/dts/src/arm64/renesas/ulcb.dtsi
@@ -48,6 +48,7 @@
 
 		port {
 			hdmi0_con: endpoint {
+				remote-endpoint = <&rcar_dw_hdmi0_out>;
 			};
 		};
 	};
@@ -199,10 +200,6 @@
 	};
 };
 
-&hdmi0_con {
-	remote-endpoint = <&rcar_dw_hdmi0_out>;
-};
-
 &i2c2 {
 	pinctrl-0 = <&i2c2_pins>;
 	pinctrl-names = "default";
diff --git a/dts/src/arm64/rockchip/px30.dtsi b/dts/src/arm64/rockchip/px30.dtsi
index 00f50b05d5..f972704dfe 100644
--- a/dts/src/arm64/rockchip/px30.dtsi
+++ b/dts/src/arm64/rockchip/px30.dtsi
@@ -1072,7 +1072,7 @@
 	};
 
 	dsi: dsi@ff450000 {
-		compatible = "rockchip,px30-mipi-dsi";
+		compatible = "rockchip,px30-mipi-dsi", "snps,dw-mipi-dsi";
 		reg = <0x0 0xff450000 0x0 0x10000>;
 		interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru PCLK_MIPI_DSI>;
diff --git a/dts/src/arm64/rockchip/rk3399-kobol-helios64.dts b/dts/src/arm64/rockchip/rk3399-kobol-helios64.dts
index b6ac00f646..1eb287a3f8 100644
--- a/dts/src/arm64/rockchip/rk3399-kobol-helios64.dts
+++ b/dts/src/arm64/rockchip/rk3399-kobol-helios64.dts
@@ -89,6 +89,30 @@
 		};
 	};
 
+	hdd_a_power: hdd-a-power {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&hdd_a_power_en>;
+		pinctrl-names = "default";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-name = "hdd_a_power";
+		startup-delay-us = <2000000>;
+	};
+
+	hdd_b_power: hdd-b-power {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 RK_PA1 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&hdd_b_power_en>;
+		pinctrl-names = "default";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-name = "hdd_b_power";
+		startup-delay-us = <2000000>;
+	};
+
 	pcie_power: pcie-power {
 		compatible = "regulator-fixed";
 		enable-active-high;
@@ -101,6 +125,18 @@
 		vin-supply = <&vcc5v0_perdev>;
 	};
 
+	usblan_power: usblan-power {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 RK_PC7 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_lan_en>;
+		regulator-name = "usblan_power";
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc5v0_usb>;
+	};
+
 	vcc1v8_sys_s0: vcc1v8-sys-s0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc1v8_sys_s0";
@@ -390,7 +426,10 @@
 };
 
 &pcie0 {
+	ep-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>;
+	max-link-speed = <2>;
 	num-lanes = <2>;
+	pinctrl-names = "default";
 	status = "okay";
 
 	vpcie12v-supply = <&vcc12v_dcin>;
@@ -430,9 +469,21 @@
 	};
 
 	power {
+		hdd_a_power_en: hdd-a-power-en {
+			rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		hdd_b_power_en: hdd-b-power-en {
+			rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
 		vcc5v0_usb_en: vcc5v0-usb-en {
 			rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
+
+		usb_lan_en: usb-lan-en {
+			rockchip,pins = <1 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
 	};
 
 	vcc3v0-sd {
@@ -531,5 +582,41 @@
 	usb@fe900000 {
 		dr_mode = "host";
 		status = "okay";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		hub@1 {
+			compatible = "usb2109,0815";
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@1 {
+				reg = <1>;
+				#trigger-source-cells = <0>;
+			};
+
+			port@2 {
+				reg = <2>;
+				#trigger-source-cells = <0>;
+			};
+
+			port@3 {
+				reg = <3>;
+				#trigger-source-cells = <0>;
+			};
+
+			device@4 {
+				compatible = "usbbda,8156";
+				reg = <4>;
+				#address-cells = <2>;
+				#size-cells = <0>;
+
+				interface@0 {	/* interface 0 of configuration 1 */
+					compatible = "usbbda,8156.config1.0";
+					reg = <0 1>;
+				};
+			};
+		};
 	};
 };
diff --git a/dts/src/arm64/rockchip/rk3399-rock-pi-4.dtsi b/dts/src/arm64/rockchip/rk3399-rock-pi-4.dtsi
index 6a434be628..92acf6ea29 100644
--- a/dts/src/arm64/rockchip/rk3399-rock-pi-4.dtsi
+++ b/dts/src/arm64/rockchip/rk3399-rock-pi-4.dtsi
@@ -36,7 +36,7 @@
 		reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
 	};
 
-	sound {
+	sound: sound {
 		compatible = "audio-graph-card";
 		label = "Analog";
 		dais = <&i2s0_p0>;
@@ -543,6 +543,16 @@
 		};
 	};
 
+	es8316 {
+		hp_detect: hp-detect {
+			rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		hp_int: hp-int {
+			rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
 	pcie {
 		pcie_pwr_en: pcie-pwr-en {
 			rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
diff --git a/dts/src/arm64/rockchip/rk3399-rock-pi-4a-plus.dts b/dts/src/arm64/rockchip/rk3399-rock-pi-4a-plus.dts
index 281a04b2f5..f5a68d8d07 100644
--- a/dts/src/arm64/rockchip/rk3399-rock-pi-4a-plus.dts
+++ b/dts/src/arm64/rockchip/rk3399-rock-pi-4a-plus.dts
@@ -12,3 +12,14 @@
 	model = "Radxa ROCK Pi 4A+";
 	compatible = "radxa,rockpi4a-plus", "radxa,rockpi4", "rockchip,rk3399";
 };
+
+&es8316 {
+	pinctrl-0 = <&hp_detect &hp_int>;
+	pinctrl-names = "default";
+	interrupt-parent = <&gpio1>;
+	interrupts = <RK_PA1 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&sound {
+	hp-det-gpio = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
+};
diff --git a/dts/src/arm64/rockchip/rk3399-rock-pi-4b-plus.dts b/dts/src/arm64/rockchip/rk3399-rock-pi-4b-plus.dts
index dfad13d2ab..cec3b7b1b9 100644
--- a/dts/src/arm64/rockchip/rk3399-rock-pi-4b-plus.dts
+++ b/dts/src/arm64/rockchip/rk3399-rock-pi-4b-plus.dts
@@ -17,6 +17,13 @@
 	};
 };
 
+&es8316 {
+	pinctrl-0 = <&hp_detect &hp_int>;
+	pinctrl-names = "default";
+	interrupt-parent = <&gpio1>;
+	interrupts = <RK_PA1 IRQ_TYPE_LEVEL_HIGH>;
+};
+
 &sdio0 {
 	status = "okay";
 
@@ -31,17 +38,24 @@
 	};
 };
 
+&sound {
+	hp-det-gpio = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
+};
+
 &uart0 {
 	status = "okay";
 
 	bluetooth {
-		compatible = "brcm,bcm43438-bt";
+		compatible = "brcm,bcm4345c5";
 		clocks = <&rk808 1>;
-		clock-names = "ext_clock";
+		clock-names = "lpo";
 		device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
 		host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
 		shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
+		max-speed = <1500000>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
+		vbat-supply = <&vcc3v3_sys>;
+		vddio-supply = <&vcc_1v8>;
 	};
 };
diff --git a/dts/src/arm64/rockchip/rk3399-rock-pi-4b.dts b/dts/src/arm64/rockchip/rk3399-rock-pi-4b.dts
index 6c63e61706..cf48746a3a 100644
--- a/dts/src/arm64/rockchip/rk3399-rock-pi-4b.dts
+++ b/dts/src/arm64/rockchip/rk3399-rock-pi-4b.dts
@@ -34,13 +34,16 @@
 	status = "okay";
 
 	bluetooth {
-		compatible = "brcm,bcm43438-bt";
+		compatible = "brcm,bcm4345c5";
 		clocks = <&rk808 1>;
-		clock-names = "ext_clock";
+		clock-names = "lpo";
 		device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
 		host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
 		shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
+		max-speed = <1500000>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
+		vbat-supply = <&vcc3v3_sys>;
+		vddio-supply = <&vcc_1v8>;
 	};
 };
diff --git a/dts/src/arm64/rockchip/rk3399-rock-pi-4c.dts b/dts/src/arm64/rockchip/rk3399-rock-pi-4c.dts
index 99169bcd51..793d848339 100644
--- a/dts/src/arm64/rockchip/rk3399-rock-pi-4c.dts
+++ b/dts/src/arm64/rockchip/rk3399-rock-pi-4c.dts
@@ -17,6 +17,13 @@
 	};
 };
 
+&es8316 {
+	pinctrl-0 = <&hp_detect &hp_int>;
+	pinctrl-names = "default";
+	interrupt-parent = <&gpio1>;
+	interrupts = <RK_PA1 IRQ_TYPE_LEVEL_HIGH>;
+};
+
 &sdio0 {
 	status = "okay";
 
@@ -31,18 +38,25 @@
 	};
 };
 
+&sound {
+	hp-det-gpio = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
+};
+
 &uart0 {
 	status = "okay";
 
 	bluetooth {
-		compatible = "brcm,bcm43438-bt";
+		compatible = "brcm,bcm4345c5";
 		clocks = <&rk808 1>;
-		clock-names = "ext_clock";
+		clock-names = "lpo";
 		device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
 		host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
 		shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
+		max-speed = <1500000>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
+		vbat-supply = <&vcc3v3_sys>;
+		vddio-supply = <&vcc_1v8>;
 	};
 };
 
diff --git a/dts/src/arm64/rockchip/rk3566-quartz64-a.dts b/dts/src/arm64/rockchip/rk3566-quartz64-a.dts
index 4d4b2a301b..166399b7f1 100644
--- a/dts/src/arm64/rockchip/rk3566-quartz64-a.dts
+++ b/dts/src/arm64/rockchip/rk3566-quartz64-a.dts
@@ -509,6 +509,11 @@
 	status = "okay";
 };
 
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1m1_cs0 &spi1m1_pins>;
+};
+
 &tsadc {
 	/* tshut mode 0:CRU 1:GPIO */
 	rockchip,hw-tshut-mode = <1>;
diff --git a/dts/src/arm64/rockchip/rk356x.dtsi b/dts/src/arm64/rockchip/rk356x.dtsi
index 46d9552f60..a68033a239 100644
--- a/dts/src/arm64/rockchip/rk356x.dtsi
+++ b/dts/src/arm64/rockchip/rk356x.dtsi
@@ -39,6 +39,10 @@
 		serial7 = &uart7;
 		serial8 = &uart8;
 		serial9 = &uart9;
+		spi0 = &spi0;
+		spi1 = &spi1;
+		spi2 = &spi2;
+		spi3 = &spi3;
 	};
 
 	cpus {
@@ -269,7 +273,7 @@
 		clocks = <&pmucru CLK_PWM0>, <&pmucru PCLK_PWM0>;
 		clock-names = "pwm", "pclk";
 		pinctrl-0 = <&pwm0m0_pins>;
-		pinctrl-names = "active";
+		pinctrl-names = "default";
 		#pwm-cells = <3>;
 		status = "disabled";
 	};
@@ -280,7 +284,7 @@
 		clocks = <&pmucru CLK_PWM0>, <&pmucru PCLK_PWM0>;
 		clock-names = "pwm", "pclk";
 		pinctrl-0 = <&pwm1m0_pins>;
-		pinctrl-names = "active";
+		pinctrl-names = "default";
 		#pwm-cells = <3>;
 		status = "disabled";
 	};
@@ -291,7 +295,7 @@
 		clocks = <&pmucru CLK_PWM0>, <&pmucru PCLK_PWM0>;
 		clock-names = "pwm", "pclk";
 		pinctrl-0 = <&pwm2m0_pins>;
-		pinctrl-names = "active";
+		pinctrl-names = "default";
 		#pwm-cells = <3>;
 		status = "disabled";
 	};
@@ -302,7 +306,7 @@
 		clocks = <&pmucru CLK_PWM0>, <&pmucru PCLK_PWM0>;
 		clock-names = "pwm", "pclk";
 		pinctrl-0 = <&pwm3_pins>;
-		pinctrl-names = "active";
+		pinctrl-names = "default";
 		#pwm-cells = <3>;
 		status = "disabled";
 	};
@@ -742,6 +746,66 @@
 		clock-names = "tclk", "pclk";
 	};
 
+	spi0: spi@fe610000 {
+		compatible = "rockchip,rk3568-spi", "rockchip,rk3066-spi";
+		reg = <0x0 0xfe610000 0x0 0x1000>;
+		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru CLK_SPI0>, <&cru PCLK_SPI0>;
+		clock-names = "spiclk", "apb_pclk";
+		dmas = <&dmac0 20>, <&dmac0 21>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi0m0_cs0 &spi0m0_cs1 &spi0m0_pins>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	spi1: spi@fe620000 {
+		compatible = "rockchip,rk3568-spi", "rockchip,rk3066-spi";
+		reg = <0x0 0xfe620000 0x0 0x1000>;
+		interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru CLK_SPI1>, <&cru PCLK_SPI1>;
+		clock-names = "spiclk", "apb_pclk";
+		dmas = <&dmac0 22>, <&dmac0 23>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi1m0_cs0 &spi1m0_cs1 &spi1m0_pins>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	spi2: spi@fe630000 {
+		compatible = "rockchip,rk3568-spi", "rockchip,rk3066-spi";
+		reg = <0x0 0xfe630000 0x0 0x1000>;
+		interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru CLK_SPI2>, <&cru PCLK_SPI2>;
+		clock-names = "spiclk", "apb_pclk";
+		dmas = <&dmac0 24>, <&dmac0 25>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi2m0_cs0 &spi2m0_cs1 &spi2m0_pins>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	spi3: spi@fe640000 {
+		compatible = "rockchip,rk3568-spi", "rockchip,rk3066-spi";
+		reg = <0x0 0xfe640000 0x0 0x1000>;
+		interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru CLK_SPI3>, <&cru PCLK_SPI3>;
+		clock-names = "spiclk", "apb_pclk";
+		dmas = <&dmac0 26>, <&dmac0 27>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi3m0_cs0 &spi3m0_cs1 &spi3m0_pins>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
 	uart1: serial@fe650000 {
 		compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart";
 		reg = <0x0 0xfe650000 0x0 0x100>;
@@ -951,7 +1015,7 @@
 		clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>;
 		clock-names = "pwm", "pclk";
 		pinctrl-0 = <&pwm4_pins>;
-		pinctrl-names = "active";
+		pinctrl-names = "default";
 		#pwm-cells = <3>;
 		status = "disabled";
 	};
@@ -962,7 +1026,7 @@
 		clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>;
 		clock-names = "pwm", "pclk";
 		pinctrl-0 = <&pwm5_pins>;
-		pinctrl-names = "active";
+		pinctrl-names = "default";
 		#pwm-cells = <3>;
 		status = "disabled";
 	};
@@ -973,7 +1037,7 @@
 		clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>;
 		clock-names = "pwm", "pclk";
 		pinctrl-0 = <&pwm6_pins>;
-		pinctrl-names = "active";
+		pinctrl-names = "default";
 		#pwm-cells = <3>;
 		status = "disabled";
 	};
@@ -984,7 +1048,7 @@
 		clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>;
 		clock-names = "pwm", "pclk";
 		pinctrl-0 = <&pwm7_pins>;
-		pinctrl-names = "active";
+		pinctrl-names = "default";
 		#pwm-cells = <3>;
 		status = "disabled";
 	};
@@ -995,7 +1059,7 @@
 		clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>;
 		clock-names = "pwm", "pclk";
 		pinctrl-0 = <&pwm8m0_pins>;
-		pinctrl-names = "active";
+		pinctrl-names = "default";
 		#pwm-cells = <3>;
 		status = "disabled";
 	};
@@ -1006,7 +1070,7 @@
 		clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>;
 		clock-names = "pwm", "pclk";
 		pinctrl-0 = <&pwm9m0_pins>;
-		pinctrl-names = "active";
+		pinctrl-names = "default";
 		#pwm-cells = <3>;
 		status = "disabled";
 	};
@@ -1017,7 +1081,7 @@
 		clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>;
 		clock-names = "pwm", "pclk";
 		pinctrl-0 = <&pwm10m0_pins>;
-		pinctrl-names = "active";
+		pinctrl-names = "default";
 		#pwm-cells = <3>;
 		status = "disabled";
 	};
@@ -1028,7 +1092,7 @@
 		clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>;
 		clock-names = "pwm", "pclk";
 		pinctrl-0 = <&pwm11m0_pins>;
-		pinctrl-names = "active";
+		pinctrl-names = "default";
 		#pwm-cells = <3>;
 		status = "disabled";
 	};
@@ -1039,7 +1103,7 @@
 		clocks = <&cru CLK_PWM3>, <&cru PCLK_PWM3>;
 		clock-names = "pwm", "pclk";
 		pinctrl-0 = <&pwm12m0_pins>;
-		pinctrl-names = "active";
+		pinctrl-names = "default";
 		#pwm-cells = <3>;
 		status = "disabled";
 	};
@@ -1050,7 +1114,7 @@
 		clocks = <&cru CLK_PWM3>, <&cru PCLK_PWM3>;
 		clock-names = "pwm", "pclk";
 		pinctrl-0 = <&pwm13m0_pins>;
-		pinctrl-names = "active";
+		pinctrl-names = "default";
 		#pwm-cells = <3>;
 		status = "disabled";
 	};
@@ -1061,7 +1125,7 @@
 		clocks = <&cru CLK_PWM3>, <&cru PCLK_PWM3>;
 		clock-names = "pwm", "pclk";
 		pinctrl-0 = <&pwm14m0_pins>;
-		pinctrl-names = "active";
+		pinctrl-names = "default";
 		#pwm-cells = <3>;
 		status = "disabled";
 	};
@@ -1072,7 +1136,7 @@
 		clocks = <&cru CLK_PWM3>, <&cru PCLK_PWM3>;
 		clock-names = "pwm", "pclk";
 		pinctrl-0 = <&pwm15m0_pins>;
-		pinctrl-names = "active";
+		pinctrl-names = "default";
 		#pwm-cells = <3>;
 		status = "disabled";
 	};
diff --git a/dts/src/arm64/ti/k3-am64-main.dtsi b/dts/src/arm64/ti/k3-am64-main.dtsi
index 5ad638b95f..012011dc61 100644
--- a/dts/src/arm64/ti/k3-am64-main.dtsi
+++ b/dts/src/arm64/ti/k3-am64-main.dtsi
@@ -564,6 +564,14 @@
 		ti,cpts-ext-ts-inputs = <8>;
 	};
 
+	timesync_router: pinctrl@a40000 {
+		compatible = "pinctrl-single";
+		reg = <0x0 0xa40000 0x0 0x800>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0x000107ff>;
+	};
+
 	usbss0: cdns-usb@f900000{
 		compatible = "ti,am64-usb";
 		reg = <0x00 0xf900000 0x00 0x100>;
@@ -1253,4 +1261,32 @@
 			bus_freq = <1000000>;
 		};
 	};
+
+	main_mcan0: can@20701000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x20701000 0x00 0x200>,
+		      <0x00 0x20708000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 98 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 98 5>, <&k3_clks 98 0>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+	};
+
+	main_mcan1: can@20711000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x20711000 0x00 0x200>,
+		      <0x00 0x20718000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 99 TI_SCI_PD_EXCLUSIVE>;
+		clocks =  <&k3_clks 99 5>, <&k3_clks 99 0>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+	};
 };
diff --git a/dts/src/arm64/ti/k3-am642-evm.dts b/dts/src/arm64/ti/k3-am642-evm.dts
index 6726c4c7c2..e94ae178b1 100644
--- a/dts/src/arm64/ti/k3-am642-evm.dts
+++ b/dts/src/arm64/ti/k3-am642-evm.dts
@@ -184,6 +184,20 @@
 			};
 		};
 	};
+
+	transceiver1: can-phy0 {
+		compatible = "ti,tcan1042";
+		#phy-cells = <0>;
+		max-bitrate = <5000000>;
+		standby-gpios = <&exp1 8 GPIO_ACTIVE_HIGH>;
+	};
+
+	transceiver2: can-phy1 {
+		compatible = "ti,tcan1042";
+		#phy-cells = <0>;
+		max-bitrate = <5000000>;
+		standby-gpios = <&exp1 9 GPIO_ACTIVE_HIGH>;
+	};
 };
 
 &main_pmx0 {
@@ -294,6 +308,20 @@
 			AM64X_IOPAD(0x0270, PIN_INPUT, 0) /* (D18) ECAP0_IN_APWM_OUT */
 		>;
 	};
+
+	main_mcan0_pins_default: main-mcan0-pins-default {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x0254, PIN_INPUT, 0) /* (B17) MCAN0_RX */
+			AM64X_IOPAD(0x0250, PIN_OUTPUT, 0) /* (A17) MCAN0_TX */
+		>;
+	};
+
+	main_mcan1_pins_default: main-mcan1-pins-default {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x025c, PIN_INPUT, 0) /* (D17) MCAN1_RX */
+			AM64X_IOPAD(0x0258, PIN_OUTPUT, 0) /* (C17) MCAN1_TX */
+		>;
+	};
 };
 
 &main_uart0 {
@@ -638,3 +666,15 @@
 &icssg1_mdio {
 	status = "disabled";
 };
+
+&main_mcan0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mcan0_pins_default>;
+	phys = <&transceiver1>;
+};
+
+&main_mcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mcan1_pins_default>;
+	phys = <&transceiver2>;
+};
diff --git a/dts/src/arm64/ti/k3-am642-sk.dts b/dts/src/arm64/ti/k3-am642-sk.dts
index 6b04745147..a9785bec12 100644
--- a/dts/src/arm64/ti/k3-am642-sk.dts
+++ b/dts/src/arm64/ti/k3-am642-sk.dts
@@ -525,3 +525,11 @@
 &icssg1_mdio {
 	status = "disabled";
 };
+
+&main_mcan0 {
+	status = "disabled";
+};
+
+&main_mcan1 {
+	status = "disabled";
+};
diff --git a/dts/src/arm64/ti/k3-am642.dtsi b/dts/src/arm64/ti/k3-am642.dtsi
index e2b397c884..8a76f4821b 100644
--- a/dts/src/arm64/ti/k3-am642.dtsi
+++ b/dts/src/arm64/ti/k3-am642.dtsi
@@ -60,6 +60,6 @@
 		cache-level = <2>;
 		cache-size = <0x40000>;
 		cache-line-size = <64>;
-		cache-sets = <512>;
+		cache-sets = <256>;
 	};
 };
diff --git a/dts/src/arm64/ti/k3-am65-iot2050-common.dtsi b/dts/src/arm64/ti/k3-am65-iot2050-common.dtsi
index 65da226847..3079eaee01 100644
--- a/dts/src/arm64/ti/k3-am65-iot2050-common.dtsi
+++ b/dts/src/arm64/ti/k3-am65-iot2050-common.dtsi
@@ -646,6 +646,14 @@
 	reset-gpios = <&wkup_gpio0 27 GPIO_ACTIVE_HIGH>;
 };
 
+&m_can0 {
+	status = "disabled";
+};
+
+&m_can1 {
+	status = "disabled";
+};
+
 &pcie1_ep {
 	status = "disabled";
 };
@@ -731,3 +739,15 @@
 &icssg2_mdio {
 	status = "disabled";
 };
+
+&mcasp0 {
+	status = "disabled";
+};
+
+&mcasp1 {
+	status = "disabled";
+};
+
+&mcasp2 {
+	status = "disabled";
+};
diff --git a/dts/src/arm64/ti/k3-am65-mcu.dtsi b/dts/src/arm64/ti/k3-am65-mcu.dtsi
index c93ff1520a..8d592bf41d 100644
--- a/dts/src/arm64/ti/k3-am65-mcu.dtsi
+++ b/dts/src/arm64/ti/k3-am65-mcu.dtsi
@@ -159,6 +159,36 @@
 		};
 	};
 
+	m_can0: mcan@40528000 {
+		compatible = "bosch,m_can";
+		reg = <0x0 0x40528000 0x0 0x400>,
+		      <0x0 0x40500000 0x0 0x4400>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 102 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 102 5>, <&k3_clks 102 0>;
+		clock-names = "hclk", "cclk";
+		interrupt-parent = <&gic500>;
+		interrupts = <GIC_SPI 544 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 545 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+	};
+
+	m_can1: mcan@40568000 {
+		compatible = "bosch,m_can";
+		reg = <0x0 0x40568000 0x0 0x400>,
+		      <0x0 0x40540000 0x0 0x4400>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 103 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 103 5>, <&k3_clks 103 0>;
+		clock-names = "hclk", "cclk";
+		interrupt-parent = <&gic500>;
+		interrupts = <GIC_SPI 547 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 548 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+	};
+
 	fss: fss@47000000 {
 		compatible = "simple-bus";
 		#address-cells = <2>;
diff --git a/dts/src/arm64/ti/k3-am654-base-board.dts b/dts/src/arm64/ti/k3-am654-base-board.dts
index cfbcebfa37..9043f91c9b 100644
--- a/dts/src/arm64/ti/k3-am654-base-board.dts
+++ b/dts/src/arm64/ti/k3-am654-base-board.dts
@@ -416,6 +416,14 @@
 	status = "disabled";
 };
 
+&m_can0 {
+	status = "disabled";
+};
+
+&m_can1 {
+	status = "disabled";
+};
+
 &mailbox0_cluster0 {
 	interrupts = <436>;
 
diff --git a/dts/src/arm64/ti/k3-j7200-main.dtsi b/dts/src/arm64/ti/k3-j7200-main.dtsi
index d60ef4f7dd..05a627ad6c 100644
--- a/dts/src/arm64/ti/k3-j7200-main.dtsi
+++ b/dts/src/arm64/ti/k3-j7200-main.dtsi
@@ -32,7 +32,7 @@
 		#size-cells = <1>;
 		ranges = <0x00 0x00 0x00100000 0x1c000>;
 
-		serdes_ln_ctrl: serdes-ln-ctrl@4080 {
+		serdes_ln_ctrl: mux-controller@4080 {
 			compatible = "mmio-mux";
 			#mux-control-cells = <1>;
 			mux-reg-masks = <0x4080 0x3>, <0x4084 0x3>, /* SERDES0 lane0/1 select */
diff --git a/dts/src/arm64/ti/k3-j7200.dtsi b/dts/src/arm64/ti/k3-j7200.dtsi
index 47567cb260..64fef4e67d 100644
--- a/dts/src/arm64/ti/k3-j7200.dtsi
+++ b/dts/src/arm64/ti/k3-j7200.dtsi
@@ -62,7 +62,7 @@
 			i-cache-sets = <256>;
 			d-cache-size = <0x8000>;
 			d-cache-line-size = <64>;
-			d-cache-sets = <128>;
+			d-cache-sets = <256>;
 			next-level-cache = <&L2_0>;
 		};
 
@@ -76,7 +76,7 @@
 			i-cache-sets = <256>;
 			d-cache-size = <0x8000>;
 			d-cache-line-size = <64>;
-			d-cache-sets = <128>;
+			d-cache-sets = <256>;
 			next-level-cache = <&L2_0>;
 		};
 	};
@@ -86,7 +86,7 @@
 		cache-level = <2>;
 		cache-size = <0x100000>;
 		cache-line-size = <64>;
-		cache-sets = <2048>;
+		cache-sets = <1024>;
 		next-level-cache = <&msmc_l3>;
 	};
 
diff --git a/dts/src/arm64/ti/k3-j721e-common-proc-board.dts b/dts/src/arm64/ti/k3-j721e-common-proc-board.dts
index dc2bc67f9f..2d7596911b 100644
--- a/dts/src/arm64/ti/k3-j721e-common-proc-board.dts
+++ b/dts/src/arm64/ti/k3-j721e-common-proc-board.dts
@@ -112,6 +112,42 @@
 			      "cpb-codec-scki",
 			      "cpb-codec-scki-48000", "cpb-codec-scki-44100";
 	};
+
+	transceiver1: can-phy0 {
+		compatible = "ti,tcan1043";
+		#phy-cells = <0>;
+		max-bitrate = <5000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&mcu_mcan0_gpio_pins_default>;
+		standby-gpios = <&wkup_gpio0 54 GPIO_ACTIVE_LOW>;
+		enable-gpios = <&wkup_gpio0 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	transceiver2: can-phy1 {
+		compatible = "ti,tcan1042";
+		#phy-cells = <0>;
+		max-bitrate = <5000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&mcu_mcan1_gpio_pins_default>;
+		standby-gpios = <&wkup_gpio0 2 GPIO_ACTIVE_HIGH>;
+	};
+
+	transceiver3: can-phy2 {
+		compatible = "ti,tcan1043";
+		#phy-cells = <0>;
+		max-bitrate = <5000000>;
+		standby-gpios = <&exp2 7 GPIO_ACTIVE_LOW>;
+		enable-gpios = <&exp2 6 GPIO_ACTIVE_HIGH>;
+	};
+
+	transceiver4: can-phy3 {
+		compatible = "ti,tcan1042";
+		#phy-cells = <0>;
+		max-bitrate = <5000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&main_mcan2_gpio_pins_default>;
+		standby-gpios = <&main_gpio0 127 GPIO_ACTIVE_HIGH>;
+	};
 };
 
 &main_pmx0 {
@@ -207,6 +243,26 @@
 			J721E_IOPAD(0x1a4, PIN_OUTPUT, 3) /* (W26) RGMII6_RXC.AUDIO_EXT_REFCLK2 */
 		>;
 	};
+
+	main_mcan0_pins_default: main-mcan0-pins-default {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x208, PIN_INPUT, 0) /* (W5) MCAN0_RX */
+			J721E_IOPAD(0x20c, PIN_OUTPUT, 0) /* (W6) MCAN0_TX */
+		>;
+	};
+
+	main_mcan2_pins_default: main-mcan2-pins-default {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x01f0, PIN_INPUT, 3) /* (AC2) MCAN2_RX.GPIO0_123 */
+			J721E_IOPAD(0x01f4, PIN_OUTPUT, 3) /* (AB1) MCAN2_TX.GPIO0_124 */
+		>;
+	};
+
+	main_mcan2_gpio_pins_default: main-mcan2-gpio-pins-default {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x200, PIN_INPUT, 7) /* (AC4) UART1_CTSn.GPIO0_127 */
+		>;
+	};
 };
 
 &wkup_pmx0 {
@@ -252,6 +308,33 @@
 			J721E_WKUP_IOPAD(0x0088, PIN_INPUT, 0) /* MCU_MDIO0_MDIO */
 		>;
 	};
+
+	mcu_mcan0_pins_default: mcu-mcan0-pins-default {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0xac, PIN_INPUT, 0) /* (C29) MCU_MCAN0_RX */
+			J721E_WKUP_IOPAD(0xa8, PIN_OUTPUT, 0) /* (D29) MCU_MCAN0_TX */
+		>;
+	};
+
+	mcu_mcan0_gpio_pins_default: mcu-mcan0-gpio-pins-default {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0xb0, PIN_INPUT, 7) /* (F26) WKUP_GPIO0_0 */
+			J721E_WKUP_IOPAD(0x98, PIN_INPUT, 7) /* (E28) MCU_SPI0_D1.WKUP_GPIO0_54 */
+		>;
+	};
+
+	mcu_mcan1_pins_default: mcu-mcan1-pins-default {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0xc4, PIN_INPUT, 0) /* (G24) WKUP_GPIO0_5.MCU_MCAN1_RX */
+			J721E_WKUP_IOPAD(0xc0, PIN_OUTPUT, 0) /* (G25) WKUP_GPIO0_4.MCU_MCAN1_TX */
+		>;
+	};
+
+	mcu_mcan1_gpio_pins_default: mcu-mcan1-gpio-pins-default {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0xb8, PIN_INPUT, 7) /* (F28) WKUP_GPIO0_2 */
+		>;
+	};
 };
 
 &wkup_uart0 {
@@ -773,3 +856,75 @@
 &icssg1_mdio {
 	status = "disabled";
 };
+
+&mcu_mcan0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_mcan0_pins_default>;
+	phys = <&transceiver1>;
+};
+
+&mcu_mcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_mcan1_pins_default>;
+	phys = <&transceiver2>;
+};
+
+&main_mcan0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mcan0_pins_default>;
+	phys = <&transceiver3>;
+};
+
+&main_mcan1 {
+	status = "disabled";
+};
+
+&main_mcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mcan2_pins_default>;
+	phys = <&transceiver4>;
+};
+
+&main_mcan3 {
+	status = "disabled";
+};
+
+&main_mcan4 {
+	status = "disabled";
+};
+
+&main_mcan5 {
+	status = "disabled";
+};
+
+&main_mcan6 {
+	status = "disabled";
+};
+
+&main_mcan7 {
+	status = "disabled";
+};
+
+&main_mcan8 {
+	status = "disabled";
+};
+
+&main_mcan9 {
+	status = "disabled";
+};
+
+&main_mcan10 {
+	status = "disabled";
+};
+
+&main_mcan11 {
+	status = "disabled";
+};
+
+&main_mcan12 {
+	status = "disabled";
+};
+
+&main_mcan13 {
+	status = "disabled";
+};
diff --git a/dts/src/arm64/ti/k3-j721e-main.dtsi b/dts/src/arm64/ti/k3-j721e-main.dtsi
index 08c8d1b47d..599861259a 100644
--- a/dts/src/arm64/ti/k3-j721e-main.dtsi
+++ b/dts/src/arm64/ti/k3-j721e-main.dtsi
@@ -42,7 +42,7 @@
 		#size-cells = <1>;
 		ranges = <0x0 0x0 0x00100000 0x1c000>;
 
-		serdes_ln_ctrl: mux@4080 {
+		serdes_ln_ctrl: mux-controller@4080 {
 			compatible = "mmio-mux";
 			reg = <0x00004080 0x50>;
 			#mux-control-cells = <1>;
@@ -1940,4 +1940,200 @@
 			bus_freq = <1000000>;
 		};
 	};
+
+	main_mcan0: can@2701000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02701000 0x00 0x200>,
+		      <0x00 0x02708000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 156 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 156 0>, <&k3_clks 156 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+	};
+
+	main_mcan1: can@2711000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02711000 0x00 0x200>,
+		      <0x00 0x02718000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 158 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 158 0>, <&k3_clks 158 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+	};
+
+	main_mcan2: can@2721000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02721000 0x00 0x200>,
+		      <0x00 0x02728000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 160 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 160 0>, <&k3_clks 160 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+	};
+
+	main_mcan3: can@2731000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02731000 0x00 0x200>,
+		      <0x00 0x02738000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 161 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 161 0>, <&k3_clks 161 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+	};
+
+	main_mcan4: can@2741000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02741000 0x00 0x200>,
+		      <0x00 0x02748000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 162 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 162 0>, <&k3_clks 162 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+	};
+
+	main_mcan5: can@2751000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02751000 0x00 0x200>,
+		      <0x00 0x02758000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 163 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 163 0>, <&k3_clks 163 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+	};
+
+	main_mcan6: can@2761000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02761000 0x00 0x200>,
+		      <0x00 0x02768000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 164 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 164 0>, <&k3_clks 164 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+	};
+
+	main_mcan7: can@2771000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02771000 0x00 0x200>,
+		      <0x00 0x02778000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 165 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 165 0>, <&k3_clks 165 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+	};
+
+	main_mcan8: can@2781000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02781000 0x00 0x200>,
+		      <0x00 0x02788000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 166 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 166 0>, <&k3_clks 166 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 576 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 577 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+	};
+
+	main_mcan9: can@2791000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02791000 0x00 0x200>,
+		      <0x00 0x02798000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 167 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 167 0>, <&k3_clks 167 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 579 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 580 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+	};
+
+	main_mcan10: can@27a1000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x027a1000 0x00 0x200>,
+		      <0x00 0x027a8000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 168 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 168 0>, <&k3_clks 168 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+	};
+
+	main_mcan11: can@27b1000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x027b1000 0x00 0x200>,
+		      <0x00 0x027b8000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 169 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 169 0>, <&k3_clks 169 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+	};
+
+	main_mcan12: can@27c1000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x027c1000 0x00 0x200>,
+		      <0x00 0x027c8000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 170 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 170 0>, <&k3_clks 170 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+	};
+
+	main_mcan13: can@27d1000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x027d1000 0x00 0x200>,
+		      <0x00 0x027d8000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 171 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 171 0>, <&k3_clks 171 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+	};
 };
diff --git a/dts/src/arm64/ti/k3-j721e-mcu-wakeup.dtsi b/dts/src/arm64/ti/k3-j721e-mcu-wakeup.dtsi
index d2dceda72f..b4972dfb7d 100644
--- a/dts/src/arm64/ti/k3-j721e-mcu-wakeup.dtsi
+++ b/dts/src/arm64/ti/k3-j721e-mcu-wakeup.dtsi
@@ -390,4 +390,32 @@
 			ti,loczrama = <1>;
 		};
 	};
+
+	mcu_mcan0: can@40528000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x40528000 0x00 0x200>,
+		      <0x00 0x40500000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 172 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 172 0>, <&k3_clks 172 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 832 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 833 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+	};
+
+	mcu_mcan1: can@40568000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x40568000 0x00 0x200>,
+		      <0x00 0x40540000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 173 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 173 0>, <&k3_clks 173 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 835 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 836 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+	};
 };
diff --git a/dts/src/arm64/ti/k3-j721e.dtsi b/dts/src/arm64/ti/k3-j721e.dtsi
index 214359e728..4a3872fce5 100644
--- a/dts/src/arm64/ti/k3-j721e.dtsi
+++ b/dts/src/arm64/ti/k3-j721e.dtsi
@@ -64,7 +64,7 @@
 			i-cache-sets = <256>;
 			d-cache-size = <0x8000>;
 			d-cache-line-size = <64>;
-			d-cache-sets = <128>;
+			d-cache-sets = <256>;
 			next-level-cache = <&L2_0>;
 		};
 
@@ -78,7 +78,7 @@
 			i-cache-sets = <256>;
 			d-cache-size = <0x8000>;
 			d-cache-line-size = <64>;
-			d-cache-sets = <128>;
+			d-cache-sets = <256>;
 			next-level-cache = <&L2_0>;
 		};
 	};
@@ -88,7 +88,7 @@
 		cache-level = <2>;
 		cache-size = <0x100000>;
 		cache-line-size = <64>;
-		cache-sets = <2048>;
+		cache-sets = <1024>;
 		next-level-cache = <&msmc_l3>;
 	};
 
diff --git a/dts/src/arm64/ti/k3-j721s2-common-proc-board.dts b/dts/src/arm64/ti/k3-j721s2-common-proc-board.dts
new file mode 100644
index 0000000000..a5a24f9f46
--- /dev/null
+++ b/dts/src/arm64/ti/k3-j721s2-common-proc-board.dts
@@ -0,0 +1,421 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2021 Texas Instruments Incorporated - https://www.ti.com/
+ *
+ * Common Processor Board: https://www.ti.com/tool/J721EXCPXEVM
+ */
+
+/dts-v1/;
+
+#include "k3-j721s2-som-p0.dtsi"
+#include <dt-bindings/net/ti-dp83867.h>
+
+/ {
+	compatible = "ti,j721s2-evm", "ti,j721s2";
+	model = "Texas Instruments J721S2 EVM";
+
+	chosen {
+		stdout-path = "serial10:115200n8";
+		bootargs = "console=ttyS10,115200n8 earlycon=ns16550a,mmio32,2880000";
+	};
+
+	evm_12v0: fixedregulator-evm12v0 {
+		/* main supply */
+		compatible = "regulator-fixed";
+		regulator-name = "evm_12v0";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vsys_3v3: fixedregulator-vsys3v3 {
+		/* Output of LM5140 */
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&evm_12v0>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vsys_5v0: fixedregulator-vsys5v0 {
+		/* Output of LM5140 */
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&evm_12v0>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_mmc1: fixedregulator-sd {
+		/* Output of TPS22918 */
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_mmc1";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		enable-active-high;
+		vin-supply = <&vsys_3v3>;
+		gpio = <&exp2 2 GPIO_ACTIVE_HIGH>;
+	};
+
+	vdd_sd_dv: gpio-regulator-TLV71033 {
+		/* Output of TLV71033 */
+		compatible = "regulator-gpio";
+		regulator-name = "tlv71033";
+		pinctrl-names = "default";
+		pinctrl-0 = <&vdd_sd_dv_pins_default>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		vin-supply = <&vsys_5v0>;
+		gpios = <&main_gpio0 8 GPIO_ACTIVE_HIGH>;
+		states = <1800000 0x0>,
+			 <3300000 0x1>;
+	};
+
+	transceiver1: can-phy1 {
+		compatible = "ti,tcan1043";
+		#phy-cells = <0>;
+		max-bitrate = <5000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&mcu_mcan0_gpio_pins_default>;
+		standby-gpios = <&wkup_gpio0 69 GPIO_ACTIVE_LOW>;
+		enable-gpios = <&wkup_gpio0 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	transceiver2: can-phy2 {
+		compatible = "ti,tcan1042";
+		#phy-cells = <0>;
+		max-bitrate = <5000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&mcu_mcan1_gpio_pins_default>;
+		standby-gpios = <&wkup_gpio0 2 GPIO_ACTIVE_HIGH>;
+	};
+
+};
+
+&main_pmx0 {
+	main_uart8_pins_default: main-uart8-pins-default {
+		pinctrl-single,pins = <
+			J721S2_IOPAD(0x040, PIN_INPUT, 14) /* (AC28) MCASP0_AXR0.UART8_CTSn */
+			J721S2_IOPAD(0x044, PIN_OUTPUT, 14) /* (Y26) MCASP0_AXR1.UART8_RTSn */
+			J721S2_IOPAD(0x0d0, PIN_INPUT, 11) /* (AF26) SPI0_CS1.UART8_RXD */
+			J721S2_IOPAD(0x0d4, PIN_OUTPUT, 11) /* (AH27) SPI0_CLK.UART8_TXD */
+		>;
+	};
+
+	main_i2c3_pins_default: main-i2c3-pins-default {
+		pinctrl-single,pins = <
+			J721S2_IOPAD(0x064, PIN_INPUT_PULLUP, 13) /* (W28) MCAN0_TX.I2C3_SCL */
+			J721S2_IOPAD(0x060, PIN_INPUT_PULLUP, 13) /* (AC27) MCASP2_AXR1.I2C3_SDA */
+		>;
+	};
+
+	main_mmc1_pins_default: main-mmc1-pins-default {
+		pinctrl-single,pins = <
+			J721S2_IOPAD(0x104, PIN_INPUT, 0) /* (P23) MMC1_CLK */
+			J721S2_IOPAD(0x108, PIN_INPUT, 0) /* (N24) MMC1_CMD */
+			J721S2_IOPAD(0x100, PIN_INPUT, 0) /* (###) MMC1_CLKLB */
+			J721S2_IOPAD(0x0fc, PIN_INPUT, 0) /* (M23) MMC1_DAT0 */
+			J721S2_IOPAD(0x0f8, PIN_INPUT, 0) /* (P24) MMC1_DAT1 */
+			J721S2_IOPAD(0x0f4, PIN_INPUT, 0) /* (R24) MMC1_DAT2 */
+			J721S2_IOPAD(0x0f0, PIN_INPUT, 0) /* (R22) MMC1_DAT3 */
+			J721S2_IOPAD(0x0e8, PIN_INPUT, 8) /* (AE25) TIMER_IO0.MMC1_SDCD */
+		>;
+	};
+
+	vdd_sd_dv_pins_default: vdd-sd-dv-pins-default {
+		pinctrl-single,pins = <
+			J721S2_IOPAD(0x020, PIN_INPUT, 7) /* (AA23) MCAN15_RX.GPIO0_8 */
+		>;
+	};
+};
+
+&wkup_pmx0 {
+	mcu_cpsw_pins_default: mcu-cpsw-pins-default {
+		pinctrl-single,pins = <
+			J721S2_WKUP_IOPAD(0x094, PIN_INPUT, 0) /* (B22) MCU_RGMII1_RD0 */
+			J721S2_WKUP_IOPAD(0x090, PIN_INPUT, 0) /* (B21) MCU_RGMII1_RD1 */
+			J721S2_WKUP_IOPAD(0x08c, PIN_INPUT, 0) /* (C22) MCU_RGMII1_RD2 */
+			J721S2_WKUP_IOPAD(0x088, PIN_INPUT, 0) /* (D23) MCU_RGMII1_RD3 */
+			J721S2_WKUP_IOPAD(0x084, PIN_INPUT, 0) /* (D22) MCU_RGMII1_RXC */
+			J721S2_WKUP_IOPAD(0x06c, PIN_INPUT, 0) /* (E23) MCU_RGMII1_RX_CTL */
+			J721S2_WKUP_IOPAD(0x07c, PIN_OUTPUT, 0) /* (F23) MCU_RGMII1_TD0 */
+			J721S2_WKUP_IOPAD(0x078, PIN_OUTPUT, 0) /* (G22) MCU_RGMII1_TD1 */
+			J721S2_WKUP_IOPAD(0x074, PIN_OUTPUT, 0) /* (E21) MCU_RGMII1_TD2 */
+			J721S2_WKUP_IOPAD(0x070, PIN_OUTPUT, 0) /* (E22) MCU_RGMII1_TD3 */
+			J721S2_WKUP_IOPAD(0x080, PIN_OUTPUT, 0) /* (F21) MCU_RGMII1_TXC */
+			J721S2_WKUP_IOPAD(0x068, PIN_OUTPUT, 0) /* (F22) MCU_RGMII1_TX_CTL */
+		>;
+	};
+
+	mcu_mdio_pins_default: mcu-mdio-pins-default {
+		pinctrl-single,pins = <
+			J721S2_WKUP_IOPAD(0x09c, PIN_OUTPUT, 0) /* (A21) MCU_MDIO0_MDC */
+			J721S2_WKUP_IOPAD(0x098, PIN_INPUT, 0) /* (A22) MCU_MDIO0_MDIO */
+		>;
+	};
+
+	mcu_mcan0_pins_default: mcu-mcan0-pins-default {
+		pinctrl-single,pins = <
+			J721S2_WKUP_IOPAD(0x0bc, PIN_INPUT, 0) /* (E28) MCU_MCAN0_RX */
+			J721S2_WKUP_IOPAD(0x0b8, PIN_OUTPUT, 0) /* (E27) MCU_MCAN0_TX */
+		>;
+	};
+
+	mcu_mcan1_pins_default: mcu-mcan1-pins-default {
+		pinctrl-single,pins = <
+			J721S2_WKUP_IOPAD(0x0d4, PIN_INPUT, 0) /* (F26) WKUP_GPIO0_5.MCU_MCAN1_RX */
+			J721S2_WKUP_IOPAD(0x0d0, PIN_OUTPUT, 0) /* (C23) WKUP_GPIO0_4.MCU_MCAN1_TX */
+		>;
+	};
+
+	mcu_mcan0_gpio_pins_default: mcu-mcan0-gpio-pins-default {
+		pinctrl-single,pins = <
+			J721S2_WKUP_IOPAD(0x0c0, PIN_INPUT, 7) /* (D26) WKUP_GPIO0_0 */
+			J721S2_WKUP_IOPAD(0x0a8, PIN_INPUT, 7) /* (B25) MCU_SPI0_D1.WKUP_GPIO0_69 */
+		>;
+	};
+
+	mcu_mcan1_gpio_pins_default: mcu-mcan1-gpio-pins-default {
+		pinctrl-single,pins = <
+			J721S2_WKUP_IOPAD(0x0c8, PIN_INPUT, 7) /* (C28) WKUP_GPIO0_2 */
+		>;
+	};
+};
+
+&main_gpio2 {
+	status = "disabled";
+};
+
+&main_gpio4 {
+	status = "disabled";
+};
+
+&main_gpio6 {
+	status = "disabled";
+};
+
+&wkup_gpio1 {
+	status = "disabled";
+};
+
+&wkup_uart0 {
+	status = "reserved";
+};
+
+&main_uart0 {
+	status = "disabled";
+};
+
+&main_uart1 {
+	status = "disabled";
+};
+
+&main_uart2 {
+	status = "disabled";
+};
+
+&main_uart3 {
+	status = "disabled";
+};
+
+&main_uart4 {
+	status = "disabled";
+};
+
+&main_uart5 {
+	status = "disabled";
+};
+
+&main_uart6 {
+	status = "disabled";
+};
+
+&main_uart7 {
+	status = "disabled";
+};
+
+&main_uart8 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart8_pins_default>;
+	/* Shared with TFA on this platform */
+	power-domains = <&k3_pds 357 TI_SCI_PD_SHARED>;
+};
+
+&main_uart9 {
+	status = "disabled";
+};
+
+&main_i2c0 {
+	clock-frequency = <400000>;
+
+	exp1: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "PCIE_2L_MODE_SEL", "PCIE_2L_PERSTZ", "PCIE_2L_RC_RSTZ",
+				  "PCIE_2L_EP_RST_EN", "PCIE_1L_MODE_SEL", "PCIE_1L_PERSTZ",
+				  "PCIE_1L_RC_RSTZ", "PCIE_1L_EP_RST_EN", "PCIE_2L_PRSNT#",
+				  "PCIE_1L_PRSNT#", "CDCI1_OE1/OE4", "CDCI1_OE2/OE3", "EXP_MUX1",
+				  "EXP_MUX2", "EXP_MUX3", "GESI_EXP_PHY_RSTz";
+	};
+
+	exp2: gpio@22 {
+		compatible = "ti,tca6424";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "APPLE_AUTH_RSTZ", "MLB_RSTZ", "GPIO_USD_PWR_EN", "USBC_PWR_EN",
+				  "USBC_MODE_SEL1", "USBC_MODE_SEL0", "MCAN0_EN", "MCAN0_STB#",
+				  "MUX_SPAREMUX_SPARE", "MCASP/TRACE_MUX_S0", "MCASP/TRACE_MUX_S1",
+				  "MLB_MUX_SEL", "MCAN_MUX_SEL", "MCASP2/SPI3_MUX_SEL", "PCIe_CLKREQn_MUX_SEL",
+				  "CDCI2_RSTZ", "ENET_EXP_PWRDN", "ENET_EXP_RESETZ", "ENET_I2CMUX_SEL",
+				  "ENET_EXP_SPARE2", "M2PCIE_RTSZ", "USER_INPUT1", "USER_LED1", "USER_LED2";
+	};
+};
+
+&main_i2c1 {
+	status = "disabled";
+};
+
+&main_i2c2 {
+	status = "disabled";
+};
+
+&main_i2c3 {
+	status = "disabled";
+};
+
+&main_i2c4 {
+	status = "disabled";
+};
+
+&main_i2c5 {
+	status = "disabled";
+};
+
+&main_i2c6 {
+	status = "disabled";
+};
+
+&main_sdhci0 {
+	/* eMMC */
+	non-removable;
+	ti,driver-strength-ohm = <50>;
+	disable-wp;
+};
+
+&main_sdhci1 {
+	/* SD card */
+	pinctrl-0 = <&main_mmc1_pins_default>;
+	pinctrl-names = "default";
+	disable-wp;
+	vmmc-supply = <&vdd_mmc1>;
+	vqmmc-supply = <&vdd_sd_dv>;
+};
+
+&mcu_cpsw {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_cpsw_pins_default &mcu_mdio_pins_default>;
+};
+
+&davinci_mdio {
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+		ti,min-output-impedance;
+	};
+};
+
+&cpsw_port1 {
+	phy-mode = "rgmii-rxid";
+	phy-handle = <&phy0>;
+};
+
+&mcu_mcan0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_mcan0_pins_default>;
+	phys = <&transceiver1>;
+};
+
+&mcu_mcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_mcan1_pins_default>;
+	phys = <&transceiver2>;
+};
+
+&main_mcan0 {
+	status = "disabled";
+};
+
+&main_mcan1 {
+	status = "disabled";
+};
+
+&main_mcan2 {
+	status = "disabled";
+};
+
+&main_mcan3 {
+	status = "disabled";
+};
+
+&main_mcan4 {
+	status = "disabled";
+};
+
+&main_mcan5 {
+	status = "disabled";
+};
+
+&main_mcan6 {
+	status = "disabled";
+};
+
+&main_mcan7 {
+	status = "disabled";
+};
+
+&main_mcan8 {
+	status = "disabled";
+};
+
+&main_mcan9 {
+	status = "disabled";
+};
+
+&main_mcan10 {
+	status = "disabled";
+};
+
+&main_mcan11 {
+	status = "disabled";
+};
+
+&main_mcan12 {
+	status = "disabled";
+};
+
+&main_mcan13 {
+	status = "disabled";
+};
+
+&main_mcan14 {
+	status = "disabled";
+};
+
+&main_mcan15 {
+	status = "disabled";
+};
+
+&main_mcan17 {
+	status = "disabled";
+};
diff --git a/dts/src/arm64/ti/k3-j721s2-main.dtsi b/dts/src/arm64/ti/k3-j721s2-main.dtsi
new file mode 100644
index 0000000000..b04db1d3ab
--- /dev/null
+++ b/dts/src/arm64/ti/k3-j721s2-main.dtsi
@@ -0,0 +1,937 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for J721S2 SoC Family Main Domain peripherals
+ *
+ * Copyright (C) 2021 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&cbass_main {
+	msmc_ram: sram@70000000 {
+		compatible = "mmio-sram";
+		reg = <0x0 0x70000000 0x0 0x400000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x70000000 0x400000>;
+
+		atf-sram@0 {
+			reg = <0x0 0x20000>;
+		};
+
+		tifs-sram@1f0000 {
+			reg = <0x1f0000 0x10000>;
+		};
+
+		l3cache-sram@200000 {
+			reg = <0x200000 0x200000>;
+		};
+	};
+
+	gic500: interrupt-controller@1800000 {
+		compatible = "arm,gic-v3";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x00 0x01800000 0x00 0x200000>, /* GICD */
+		      <0x00 0x01900000 0x00 0x100000>; /* GICR */
+
+		/* vcpumntirq: virtual CPU interface maintenance interrupt */
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+		gic_its: msi-controller@1820000 {
+			compatible = "arm,gic-v3-its";
+			reg = <0x00 0x01820000 0x00 0x10000>;
+			socionext,synquacer-pre-its = <0x1000000 0x400000>;
+			msi-controller;
+			#msi-cells = <1>;
+		};
+	};
+
+	main_gpio_intr: interrupt-controller@a00000 {
+		compatible = "ti,sci-intr";
+		reg = <0x00 0x00a00000 0x00 0x800>;
+		ti,intr-trigger-type = <1>;
+		interrupt-controller;
+		interrupt-parent = <&gic500>;
+		#interrupt-cells = <1>;
+		ti,sci = <&sms>;
+		ti,sci-dev-id = <148>;
+		ti,interrupt-ranges = <8 360 56>;
+	};
+
+	main_pmx0: pinctrl@11c000 {
+		compatible = "pinctrl-single";
+		/* Proxy 0 addressing */
+		reg = <0x0 0x11c000 0x0 0x120>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0xffffffff>;
+	};
+
+	main_uart0: serial@2800000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02800000 0x00 0x200>;
+		interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+		current-speed = <115200>;
+		clocks = <&k3_clks 146 3>;
+		clock-names = "fclk";
+		power-domains = <&k3_pds 146 TI_SCI_PD_EXCLUSIVE>;
+	};
+
+	main_uart1: serial@2810000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02810000 0x00 0x200>;
+		interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
+		current-speed = <115200>;
+		clocks = <&k3_clks 350 3>;
+		clock-names = "fclk";
+		power-domains = <&k3_pds 350 TI_SCI_PD_EXCLUSIVE>;
+	};
+
+	main_uart2: serial@2820000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02820000 0x00 0x200>;
+		interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
+		current-speed = <115200>;
+		clocks = <&k3_clks 351 3>;
+		clock-names = "fclk";
+		power-domains = <&k3_pds 351 TI_SCI_PD_EXCLUSIVE>;
+	};
+
+	main_uart3: serial@2830000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02830000 0x00 0x200>;
+		interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
+		current-speed = <115200>;
+		clocks = <&k3_clks 352 3>;
+		clock-names = "fclk";
+		power-domains = <&k3_pds 352 TI_SCI_PD_EXCLUSIVE>;
+	};
+
+	main_uart4: serial@2840000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02840000 0x00 0x200>;
+		interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
+		current-speed = <115200>;
+		clocks = <&k3_clks 353 3>;
+		clock-names = "fclk";
+		power-domains = <&k3_pds 353 TI_SCI_PD_EXCLUSIVE>;
+	};
+
+	main_uart5: serial@2850000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02850000 0x00 0x200>;
+		interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+		current-speed = <115200>;
+		clocks = <&k3_clks 354 3>;
+		clock-names = "fclk";
+		power-domains = <&k3_pds 354 TI_SCI_PD_EXCLUSIVE>;
+	};
+
+	main_uart6: serial@2860000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02860000 0x00 0x200>;
+		interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>;
+		current-speed = <115200>;
+		clocks = <&k3_clks 355 3>;
+		clock-names = "fclk";
+		power-domains = <&k3_pds 355 TI_SCI_PD_EXCLUSIVE>;
+	};
+
+	main_uart7: serial@2870000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02870000 0x00 0x200>;
+		interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
+		current-speed = <115200>;
+		clocks = <&k3_clks 356 3>;
+		clock-names = "fclk";
+		power-domains = <&k3_pds 356 TI_SCI_PD_EXCLUSIVE>;
+	};
+
+	main_uart8: serial@2880000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02880000 0x00 0x200>;
+		interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>;
+		current-speed = <115200>;
+		clocks = <&k3_clks 357 3>;
+		clock-names = "fclk";
+		power-domains = <&k3_pds 357 TI_SCI_PD_EXCLUSIVE>;
+	};
+
+	main_uart9: serial@2890000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02890000 0x00 0x200>;
+		interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
+		current-speed = <115200>;
+		clocks = <&k3_clks 358 3>;
+		clock-names = "fclk";
+		power-domains = <&k3_pds 358 TI_SCI_PD_EXCLUSIVE>;
+	};
+
+	main_gpio0: gpio@600000 {
+		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+		reg = <0x00 0x00600000 0x00 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&main_gpio_intr>;
+		interrupts = <145>, <146>, <147>, <148>, <149>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <66>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 111 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 111 0>;
+		clock-names = "gpio";
+	};
+
+	main_gpio2: gpio@610000 {
+		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+		reg = <0x00 0x00610000 0x00 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&main_gpio_intr>;
+		interrupts = <154>, <155>, <156>, <157>, <158>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <66>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 112 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 112 0>;
+		clock-names = "gpio";
+	};
+
+	main_gpio4: gpio@620000 {
+		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+		reg = <0x00 0x00620000 0x00 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&main_gpio_intr>;
+		interrupts = <163>, <164>, <165>, <166>, <167>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <66>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 113 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 113 0>;
+		clock-names = "gpio";
+	};
+
+	main_gpio6: gpio@630000 {
+		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+		reg = <0x00 0x00630000 0x00 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&main_gpio_intr>;
+		interrupts = <172>, <173>, <174>, <175>, <176>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <66>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 114 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 114 0>;
+		clock-names = "gpio";
+	};
+
+	main_i2c0: i2c@2000000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x02000000 0x00 0x100>;
+		interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&k3_clks 214 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 214 TI_SCI_PD_EXCLUSIVE>;
+	};
+
+	main_i2c1: i2c@2010000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x02010000 0x00 0x100>;
+		interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&k3_clks 215 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 215 TI_SCI_PD_EXCLUSIVE>;
+	};
+
+	main_i2c2: i2c@2020000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x02020000 0x00 0x100>;
+		interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&k3_clks 216 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 216 TI_SCI_PD_EXCLUSIVE>;
+	};
+
+	main_i2c3: i2c@2030000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x02030000 0x00 0x100>;
+		interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&k3_clks 217 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 217 TI_SCI_PD_EXCLUSIVE>;
+	};
+
+	main_i2c4: i2c@2040000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x02040000 0x00 0x100>;
+		interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&k3_clks 218 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 218 TI_SCI_PD_EXCLUSIVE>;
+	};
+
+	main_i2c5: i2c@2050000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x02050000 0x00 0x100>;
+		interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&k3_clks 219 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 219 TI_SCI_PD_EXCLUSIVE>;
+	};
+
+	main_i2c6: i2c@2060000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x02060000 0x00 0x100>;
+		interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&k3_clks 220 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 220 TI_SCI_PD_EXCLUSIVE>;
+	};
+
+	main_sdhci0: mmc@4f80000 {
+		compatible = "ti,j721e-sdhci-8bit";
+		reg = <0x00 0x04f80000 0x00 0x1000>,
+		      <0x00 0x04f88000 0x00 0x400>;
+		interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 98 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 98 7>, <&k3_clks 98 1>;
+		clock-names =  "clk_ahb", "clk_xin";
+		assigned-clocks = <&k3_clks 98 1>;
+		assigned-clock-parents = <&k3_clks 98 2>;
+		bus-width = <8>;
+		ti,otap-del-sel-legacy = <0x0>;
+		ti,otap-del-sel-mmc-hs = <0x0>;
+		ti,otap-del-sel-ddr52 = <0x6>;
+		ti,otap-del-sel-hs200 = <0x8>;
+		ti,otap-del-sel-hs400 = <0x5>;
+		ti,itap-del-sel-legacy = <0x10>;
+		ti,itap-del-sel-mmc-hs = <0xa>;
+		ti,strobe-sel = <0x77>;
+		ti,clkbuf-sel = <0x7>;
+		ti,trm-icp = <0x8>;
+		mmc-ddr-1_8v;
+		mmc-hs200-1_8v;
+		mmc-hs400-1_8v;
+		dma-coherent;
+	};
+
+	main_sdhci1: mmc@4fb0000 {
+		compatible = "ti,j721e-sdhci-4bit";
+		reg = <0x00 0x04fb0000 0x00 0x1000>,
+		      <0x00 0x04fb8000 0x00 0x400>;
+		interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 99 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 99 8>, <&k3_clks 99 1>;
+		clock-names =  "clk_ahb", "clk_xin";
+		assigned-clocks = <&k3_clks 99 1>;
+		assigned-clock-parents = <&k3_clks 99 2>;
+		bus-width = <4>;
+		ti,otap-del-sel-legacy = <0x0>;
+		ti,otap-del-sel-sd-hs = <0x0>;
+		ti,otap-del-sel-sdr12 = <0xf>;
+		ti,otap-del-sel-sdr25 = <0xf>;
+		ti,otap-del-sel-sdr50 = <0xc>;
+		ti,otap-del-sel-sdr104 = <0x5>;
+		ti,otap-del-sel-ddr50 = <0xc>;
+		ti,itap-del-sel-legacy = <0x0>;
+		ti,itap-del-sel-sd-hs = <0x0>;
+		ti,itap-del-sel-sdr12 = <0x0>;
+		ti,itap-del-sel-sdr25 = <0x0>;
+		ti,clkbuf-sel = <0x7>;
+		ti,trm-icp = <0x8>;
+		dma-coherent;
+		/* Masking support for SDR104 capability */
+		sdhci-caps-mask = <0x00000003 0x00000000>;
+	};
+
+	main_navss: bus@30000000 {
+		compatible = "simple-mfd";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>;
+		ti,sci-dev-id = <224>;
+		dma-coherent;
+		dma-ranges;
+
+		main_navss_intr: interrupt-controller@310e0000 {
+			compatible = "ti,sci-intr";
+			reg = <0x00 0x310e0000 0x00 0x4000>;
+			ti,intr-trigger-type = <4>;
+			interrupt-controller;
+			interrupt-parent = <&gic500>;
+			#interrupt-cells = <1>;
+			ti,sci = <&sms>;
+			ti,sci-dev-id = <227>;
+			ti,interrupt-ranges = <0 64 64>,
+					      <64 448 64>,
+					      <128 672 64>;
+		};
+
+		main_udmass_inta: msi-controller@33d00000 {
+			compatible = "ti,sci-inta";
+			reg = <0x00 0x33d00000 0x00 0x100000>;
+			interrupt-controller;
+			#interrupt-cells = <0>;
+			interrupt-parent = <&main_navss_intr>;
+			msi-controller;
+			ti,sci = <&sms>;
+			ti,sci-dev-id = <265>;
+			ti,interrupt-ranges = <0 0 256>;
+		};
+
+		secure_proxy_main: mailbox@32c00000 {
+			compatible = "ti,am654-secure-proxy";
+			#mbox-cells = <1>;
+			reg-names = "target_data", "rt", "scfg";
+			reg = <0x00 0x32c00000 0x00 0x100000>,
+			      <0x00 0x32400000 0x00 0x100000>,
+			      <0x00 0x32800000 0x00 0x100000>;
+			interrupt-names = "rx_011";
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		hwspinlock: spinlock@30e00000 {
+			compatible = "ti,am654-hwspinlock";
+			reg = <0x00 0x30e00000 0x00 0x1000>;
+			#hwlock-cells = <1>;
+		};
+
+		mailbox0_cluster0: mailbox@31f80000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f80000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+		};
+
+		mailbox0_cluster1: mailbox@31f81000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f81000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+		};
+
+		mailbox0_cluster2: mailbox@31f82000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f82000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+		};
+
+		mailbox0_cluster3: mailbox@31f83000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f83000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+		};
+
+		mailbox0_cluster4: mailbox@31f84000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f84000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+		};
+
+		mailbox0_cluster5: mailbox@31f85000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f85000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+		};
+
+		mailbox0_cluster6: mailbox@31f86000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f86000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+		};
+
+		mailbox0_cluster7: mailbox@31f87000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f87000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+		};
+
+		mailbox0_cluster8: mailbox@31f88000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f88000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+		};
+
+		mailbox0_cluster9: mailbox@31f89000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f89000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+		};
+
+		mailbox0_cluster10: mailbox@31f8a000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f8a000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+		};
+
+		mailbox0_cluster11: mailbox@31f8b000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f8b000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+		};
+
+		mailbox1_cluster0: mailbox@31f90000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f90000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+		};
+
+		mailbox1_cluster1: mailbox@31f91000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f91000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+		};
+
+		mailbox1_cluster2: mailbox@31f92000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f92000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+		};
+
+		mailbox1_cluster3: mailbox@31f93000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f93000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+		};
+
+		mailbox1_cluster4: mailbox@31f94000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f94000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+		};
+
+		mailbox1_cluster5: mailbox@31f95000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f95000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+		};
+
+		mailbox1_cluster6: mailbox@31f96000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f96000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+		};
+
+		mailbox1_cluster7: mailbox@31f97000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f97000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+		};
+
+		mailbox1_cluster8: mailbox@31f98000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f98000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+		};
+
+		mailbox1_cluster9: mailbox@31f99000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f99000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+		};
+
+		mailbox1_cluster10: mailbox@31f9a000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f9a000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+		};
+
+		mailbox1_cluster11: mailbox@31f9b000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f9b000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+		};
+
+		main_ringacc: ringacc@3c000000 {
+			compatible = "ti,am654-navss-ringacc";
+			reg = <0x0 0x3c000000 0x0 0x400000>,
+			      <0x0 0x38000000 0x0 0x400000>,
+			      <0x0 0x31120000 0x0 0x100>,
+			      <0x0 0x33000000 0x0 0x40000>;
+			reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target";
+			ti,num-rings = <1024>;
+			ti,sci-rm-range-gp-rings = <0x1>;
+			ti,sci = <&sms>;
+			ti,sci-dev-id = <259>;
+			msi-parent = <&main_udmass_inta>;
+		};
+
+		main_udmap: dma-controller@31150000 {
+			compatible = "ti,j721e-navss-main-udmap";
+			reg = <0x0 0x31150000 0x0 0x100>,
+			      <0x0 0x34000000 0x0 0x80000>,
+			      <0x0 0x35000000 0x0 0x200000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt";
+			msi-parent = <&main_udmass_inta>;
+			#dma-cells = <1>;
+
+			ti,sci = <&sms>;
+			ti,sci-dev-id = <263>;
+			ti,ringacc = <&main_ringacc>;
+
+			ti,sci-rm-range-tchan = <0x0d>, /* TX_CHAN */
+						<0x0f>, /* TX_HCHAN */
+						<0x10>; /* TX_UHCHAN */
+			ti,sci-rm-range-rchan = <0x0a>, /* RX_CHAN */
+						<0x0b>, /* RX_HCHAN */
+						<0x0c>; /* RX_UHCHAN */
+			ti,sci-rm-range-rflow = <0x00>; /* GP RFLOW */
+		};
+
+		cpts@310d0000 {
+			compatible = "ti,j721e-cpts";
+			reg = <0x0 0x310d0000 0x0 0x400>;
+			reg-names = "cpts";
+			clocks = <&k3_clks 226 5>;
+			clock-names = "cpts";
+			interrupts-extended = <&main_navss_intr 391>;
+			interrupt-names = "cpts";
+			ti,cpts-periodic-outputs = <6>;
+			ti,cpts-ext-ts-inputs = <8>;
+		};
+	};
+
+	main_mcan0: can@2701000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02701000 0x00 0x200>,
+		      <0x00 0x02708000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 182 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 182 0>, <&k3_clks 182 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+	};
+
+	main_mcan1: can@2711000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02711000 0x00 0x200>,
+		      <0x00 0x02718000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 183 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 183 0>, <&k3_clks 183 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+	};
+
+	main_mcan2: can@2721000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02721000 0x00 0x200>,
+		      <0x00 0x02728000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 184 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 184 0>, <&k3_clks 184 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+	};
+
+	main_mcan3: can@2731000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02731000 0x00 0x200>,
+		      <0x00 0x02738000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 185 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 185 0>, <&k3_clks 185 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+	};
+
+	main_mcan4: can@2741000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02741000 0x00 0x200>,
+		      <0x00 0x02748000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 186 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 186 0>, <&k3_clks 186 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+	};
+
+	main_mcan5: can@2751000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02751000 0x00 0x200>,
+		      <0x00 0x02758000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 187 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 187 0>, <&k3_clks 187 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+	};
+
+	main_mcan6: can@2761000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02761000 0x00 0x200>,
+		      <0x00 0x02768000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 188 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 188 0>, <&k3_clks 188 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+	};
+
+	main_mcan7: can@2771000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02771000 0x00 0x200>,
+		      <0x00 0x02778000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 189 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 189 0>, <&k3_clks 189 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+	};
+
+	main_mcan8: can@2781000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02781000 0x00 0x200>,
+		      <0x00 0x02788000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 190 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 190 0>, <&k3_clks 190 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 576 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 577 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+	};
+
+	main_mcan9: can@2791000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02791000 0x00 0x200>,
+		      <0x00 0x02798000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 191 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 191 0>, <&k3_clks 191 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 579 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 580 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+	};
+
+	main_mcan10: can@27a1000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x027a1000 0x00 0x200>,
+		      <0x00 0x027a8000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 192 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 192 0>, <&k3_clks 192 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+	};
+
+	main_mcan11: can@27b1000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x027b1000 0x00 0x200>,
+		      <0x00 0x027b8000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 193 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 193 0>, <&k3_clks 193 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+	};
+
+	main_mcan12: can@27c1000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x027c1000 0x00 0x200>,
+		      <0x00 0x027c8000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 194 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 194 0>, <&k3_clks 194 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+	};
+
+	main_mcan13: can@27d1000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x027d1000 0x00 0x200>,
+		      <0x00 0x027d8000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 195 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 195 0>, <&k3_clks 195 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+	};
+
+	main_mcan14: can@2681000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02681000 0x00 0x200>,
+		      <0x00 0x02688000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 197 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 197 0>, <&k3_clks 197 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+	};
+
+	main_mcan15: can@2691000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02691000 0x00 0x200>,
+		      <0x00 0x02698000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 199 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 199 0>, <&k3_clks 199 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+	};
+
+	main_mcan16: can@26a1000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x026a1000 0x00 0x200>,
+		      <0x00 0x026a8000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 201 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 201 0>, <&k3_clks 201 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 784 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 785 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+	};
+
+	main_mcan17: can@26b1000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x026b1000 0x00 0x200>,
+		      <0x00 0x026b8000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 206 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 206 0>, <&k3_clks 206 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 787 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 788 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+	};
+};
diff --git a/dts/src/arm64/ti/k3-j721s2-mcu-wakeup.dtsi b/dts/src/arm64/ti/k3-j721s2-mcu-wakeup.dtsi
new file mode 100644
index 0000000000..7521963719
--- /dev/null
+++ b/dts/src/arm64/ti/k3-j721s2-mcu-wakeup.dtsi
@@ -0,0 +1,302 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for J721S2 SoC Family MCU/WAKEUP Domain peripherals
+ *
+ * Copyright (C) 2021 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&cbass_mcu_wakeup {
+	sms: system-controller@44083000 {
+		compatible = "ti,k2g-sci";
+		ti,host-id = <12>;
+
+		mbox-names = "rx", "tx";
+
+		mboxes= <&secure_proxy_main 11>,
+			<&secure_proxy_main 13>;
+
+		reg-names = "debug_messages";
+		reg = <0x00 0x44083000 0x00 0x1000>;
+
+		k3_pds: power-controller {
+			compatible = "ti,sci-pm-domain";
+			#power-domain-cells = <2>;
+		};
+
+		k3_clks: clock-controller {
+			compatible = "ti,k2g-sci-clk";
+			#clock-cells = <2>;
+		};
+
+		k3_reset: reset-controller {
+			compatible = "ti,sci-reset";
+			#reset-cells = <2>;
+		};
+	};
+
+	chipid@43000014 {
+		compatible = "ti,am654-chipid";
+		reg = <0x00 0x43000014 0x00 0x4>;
+	};
+
+	mcu_ram: sram@41c00000 {
+		compatible = "mmio-sram";
+		reg = <0x00 0x41c00000 0x00 0x100000>;
+		ranges = <0x00 0x00 0x41c00000 0x100000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+
+	wkup_pmx0: pinctrl@4301c000 {
+		compatible = "pinctrl-single";
+		/* Proxy 0 addressing */
+		reg = <0x00 0x4301c000 0x00 0x178>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0xffffffff>;
+	};
+
+	wkup_gpio_intr: interrupt-controller@42200000 {
+		compatible = "ti,sci-intr";
+		reg = <0x00 0x42200000 0x00 0x400>;
+		ti,intr-trigger-type = <1>;
+		interrupt-controller;
+		interrupt-parent = <&gic500>;
+		#interrupt-cells = <1>;
+		ti,sci = <&sms>;
+		ti,sci-dev-id = <125>;
+		ti,interrupt-ranges = <16 928 16>;
+	};
+
+	mcu_conf: syscon@40f00000 {
+		compatible = "syscon", "simple-mfd";
+		reg = <0x0 0x40f00000 0x0 0x20000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x40f00000 0x20000>;
+
+		phy_gmii_sel: phy@4040 {
+			compatible = "ti,am654-phy-gmii-sel";
+			reg = <0x4040 0x4>;
+			#phy-cells = <1>;
+		};
+
+	};
+
+	wkup_uart0: serial@42300000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x42300000 0x00 0x200>;
+		interrupts = <GIC_SPI 897 IRQ_TYPE_LEVEL_HIGH>;
+		current-speed = <115200>;
+		clocks = <&k3_clks 359 3>;
+		clock-names = "fclk";
+		power-domains = <&k3_pds 359 TI_SCI_PD_EXCLUSIVE>;
+	};
+
+	mcu_uart0: serial@40a00000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x40a00000 0x00 0x200>;
+		interrupts = <GIC_SPI 846 IRQ_TYPE_LEVEL_HIGH>;
+		current-speed = <115200>;
+		clocks = <&k3_clks 149 3>;
+		clock-names = "fclk";
+		power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>;
+	};
+
+	wkup_gpio0: gpio@42110000 {
+		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+		reg = <0x00 0x42110000 0x00 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&main_gpio_intr>;
+		interrupts = <103>, <104>, <105>, <106>, <107>, <108>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <89>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 115 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 115 0>;
+		clock-names = "gpio";
+	};
+
+	wkup_gpio1: gpio@42100000 {
+		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+		reg = <0x00 0x42100000 0x00 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&main_gpio_intr>;
+		interrupts = <112>, <113>, <114>, <115>, <116>, <117>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <89>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 116 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 116 0>;
+		clock-names = "gpio";
+	};
+
+	wkup_i2c0: i2c@42120000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x42120000 0x00 0x100>;
+		interrupts = <GIC_SPI 896 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&k3_clks 223 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 223 TI_SCI_PD_EXCLUSIVE>;
+	};
+
+	mcu_i2c0: i2c@40b00000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x40b00000 0x00 0x100>;
+		interrupts = <GIC_SPI 852 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&k3_clks 221 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 221 TI_SCI_PD_EXCLUSIVE>;
+	};
+
+	mcu_i2c1: i2c@40b10000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x40b10000 0x00 0x100>;
+		interrupts = <GIC_SPI 853 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&k3_clks 222 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 222 TI_SCI_PD_EXCLUSIVE>;
+	};
+
+	mcu_mcan0: can@40528000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x40528000 0x00 0x200>,
+		      <0x00 0x40500000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 207 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 207 0>, <&k3_clks 207 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 832 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 833 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+	};
+
+	mcu_mcan1: can@40568000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x40568000 0x00 0x200>,
+		      <0x00 0x40540000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 208 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 208 0>, <&k3_clks 208 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 835 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 836 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+	};
+
+	mcu_navss: bus@28380000{
+		compatible = "simple-mfd";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>;
+		dma-coherent;
+		dma-ranges;
+
+		ti,sci-dev-id = <267>;
+
+		mcu_ringacc: ringacc@2b800000 {
+			compatible = "ti,am654-navss-ringacc";
+			reg = <0x0 0x2b800000 0x0 0x400000>,
+			      <0x0 0x2b000000 0x0 0x400000>,
+			      <0x0 0x28590000 0x0 0x100>,
+			      <0x0 0x2a500000 0x0 0x40000>;
+			reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target";
+			ti,num-rings = <286>;
+			ti,sci-rm-range-gp-rings = <0x1>;
+			ti,sci = <&sms>;
+			ti,sci-dev-id = <272>;
+			msi-parent = <&main_udmass_inta>;
+		};
+
+		mcu_udmap: dma-controller@285c0000 {
+			compatible = "ti,j721e-navss-mcu-udmap";
+			reg = <0x0 0x285c0000 0x0 0x100>,
+			      <0x0 0x2a800000 0x0 0x40000>,
+			      <0x0 0x2aa00000 0x0 0x40000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt";
+			msi-parent = <&main_udmass_inta>;
+			#dma-cells = <1>;
+
+			ti,sci = <&sms>;
+			ti,sci-dev-id = <273>;
+			ti,ringacc = <&mcu_ringacc>;
+			ti,sci-rm-range-tchan = <0x0d>, /* TX_CHAN */
+						<0x0f>; /* TX_HCHAN */
+			ti,sci-rm-range-rchan = <0x0a>, /* RX_CHAN */
+						<0x0b>; /* RX_HCHAN */
+			ti,sci-rm-range-rflow = <0x00>; /* GP RFLOW */
+		};
+	};
+
+	mcu_cpsw: ethernet@46000000 {
+		compatible = "ti,j721e-cpsw-nuss";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		reg = <0x0 0x46000000 0x0 0x200000>;
+		reg-names = "cpsw_nuss";
+		ranges = <0x0 0x0 0x0 0x46000000 0x0 0x200000>;
+		dma-coherent;
+		clocks = <&k3_clks 29 28>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 29 TI_SCI_PD_EXCLUSIVE>;
+
+		dmas = <&mcu_udmap 0xf000>,
+		       <&mcu_udmap 0xf001>,
+		       <&mcu_udmap 0xf002>,
+		       <&mcu_udmap 0xf003>,
+		       <&mcu_udmap 0xf004>,
+		       <&mcu_udmap 0xf005>,
+		       <&mcu_udmap 0xf006>,
+		       <&mcu_udmap 0xf007>,
+		       <&mcu_udmap 0x7000>;
+		dma-names = "tx0", "tx1", "tx2", "tx3",
+			    "tx4", "tx5", "tx6", "tx7",
+			    "rx";
+
+		ethernet-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cpsw_port1: port@1 {
+				reg = <1>;
+				ti,mac-only;
+				label = "port1";
+				ti,syscon-efuse = <&mcu_conf 0x200>;
+				phys = <&phy_gmii_sel 1>;
+			};
+		};
+
+		davinci_mdio: mdio@f00 {
+			compatible = "ti,cpsw-mdio","ti,davinci_mdio";
+			reg = <0x0 0xf00 0x0 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&k3_clks 29 28>;
+			clock-names = "fck";
+			bus_freq = <1000000>;
+		};
+
+		cpts@3d000 {
+			compatible = "ti,am65-cpts";
+			reg = <0x0 0x3d000 0x0 0x400>;
+			clocks = <&k3_clks 29 3>;
+			clock-names = "cpts";
+			interrupts-extended = <&gic500 GIC_SPI 858 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "cpts";
+			ti,cpts-ext-ts-inputs = <4>;
+			ti,cpts-periodic-outputs = <2>;
+		};
+	};
+};
diff --git a/dts/src/arm64/ti/k3-j721s2-som-p0.dtsi b/dts/src/arm64/ti/k3-j721s2-som-p0.dtsi
new file mode 100644
index 0000000000..76f0ceacb6
--- /dev/null
+++ b/dts/src/arm64/ti/k3-j721s2-som-p0.dtsi
@@ -0,0 +1,175 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * SoM: https://www.ti.com/lit/zip/sprr439
+ *
+ * Copyright (C) 2021 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+
+#include "k3-j721s2.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	memory@80000000 {
+		device_type = "memory";
+		/* 16 GB RAM */
+		reg = <0x00 0x80000000 0x00 0x80000000>,
+		      <0x08 0x80000000 0x03 0x80000000>;
+	};
+
+	/* Reserving memory regions still pending */
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		secure_ddr: optee@9e800000 {
+			reg = <0x00 0x9e800000 0x00 0x01800000>;
+			alignment = <0x1000>;
+			no-map;
+		};
+	};
+
+	transceiver0: can-phy0 {
+		/* standby pin has been grounded by default */
+		compatible = "ti,tcan1042";
+		#phy-cells = <0>;
+		max-bitrate = <5000000>;
+	};
+};
+
+&main_pmx0 {
+	main_i2c0_pins_default: main-i2c0-pins-default {
+		pinctrl-single,pins = <
+			J721S2_IOPAD(0x0e0, PIN_INPUT_PULLUP, 0) /* (AH25) I2C0_SCL */
+			J721S2_IOPAD(0x0e4, PIN_INPUT_PULLUP, 0) /* (AE24) I2C0_SDA */
+		>;
+	};
+
+	main_mcan16_pins_default: main-mcan16-pins-default {
+		pinctrl-single,pins = <
+			J721S2_IOPAD(0x028, PIN_INPUT, 0) /* (AB24) MCAN16_RX */
+			J721S2_IOPAD(0x024, PIN_OUTPUT, 0) /* (Y28) MCAN16_TX */
+		>;
+	};
+};
+
+&main_i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c0_pins_default>;
+	clock-frequency = <400000>;
+
+	exp_som: gpio@21 {
+		compatible = "ti,tca6408";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "USB2.0_MUX_SEL", "CANUART_MUX1_SEL0",
+				  "CANUART_MUX2_SEL0", "CANUART_MUX_SEL1",
+				  "GPIO_RGMII1_RST", "GPIO_eDP_ENABLE",
+				   "GPIO_LIN_EN", "CAN_STB";
+	};
+};
+
+&main_mcan16 {
+	pinctrl-0 = <&main_mcan16_pins_default>;
+	pinctrl-names = "default";
+	phys = <&transceiver0>;
+};
+
+&mailbox0_cluster0 {
+	status = "disabled";
+};
+
+&mailbox0_cluster1 {
+	status = "disabled";
+};
+
+&mailbox0_cluster2 {
+	status = "disabled";
+};
+
+&mailbox0_cluster3 {
+	status = "disabled";
+};
+
+&mailbox0_cluster4 {
+	status = "disabled";
+};
+
+&mailbox0_cluster5 {
+	status = "disabled";
+};
+
+&mailbox0_cluster6 {
+	status = "disabled";
+};
+
+&mailbox0_cluster7 {
+	status = "disabled";
+};
+
+&mailbox0_cluster8 {
+	status = "disabled";
+};
+
+&mailbox0_cluster9 {
+	status = "disabled";
+};
+
+&mailbox0_cluster10 {
+	status = "disabled";
+};
+
+&mailbox0_cluster11 {
+	status = "disabled";
+};
+
+&mailbox1_cluster0 {
+	status = "disabled";
+};
+
+&mailbox1_cluster1 {
+	status = "disabled";
+};
+
+&mailbox1_cluster2 {
+	status = "disabled";
+};
+
+&mailbox1_cluster3 {
+	status = "disabled";
+};
+
+&mailbox1_cluster4 {
+	status = "disabled";
+};
+
+&mailbox1_cluster5 {
+	status = "disabled";
+};
+
+&mailbox1_cluster6 {
+	status = "disabled";
+};
+
+&mailbox1_cluster7 {
+	status = "disabled";
+};
+
+&mailbox1_cluster8 {
+	status = "disabled";
+};
+
+&mailbox1_cluster9 {
+	status = "disabled";
+};
+
+&mailbox1_cluster10 {
+	status = "disabled";
+};
+
+&mailbox1_cluster11 {
+	status = "disabled";
+};
diff --git a/dts/src/arm64/ti/k3-j721s2.dtsi b/dts/src/arm64/ti/k3-j721s2.dtsi
new file mode 100644
index 0000000000..80d3cae03e
--- /dev/null
+++ b/dts/src/arm64/ti/k3-j721s2.dtsi
@@ -0,0 +1,189 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for J721S2 SoC Family
+ *
+ * TRM (SPRUJ28 – NOVEMBER 2021) : http://www.ti.com/lit/pdf/spruj28
+ *
+ * Copyright (C) 2021 Texas Instruments Incorporated - https://www.ti.com/
+ *
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/k3.h>
+#include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+/ {
+
+	model = "Texas Instruments K3 J721S2 SoC";
+	compatible = "ti,j721s2";
+	interrupt-parent = <&gic500>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &wkup_uart0;
+		serial1 = &mcu_uart0;
+		serial2 = &main_uart0;
+		serial3 = &main_uart1;
+		serial4 = &main_uart2;
+		serial5 = &main_uart3;
+		serial6 = &main_uart4;
+		serial7 = &main_uart5;
+		serial8 = &main_uart6;
+		serial9 = &main_uart7;
+		serial10 = &main_uart8;
+		serial11 = &main_uart9;
+		mmc0 = &main_sdhci0;
+		mmc1 = &main_sdhci1;
+		can0 = &main_mcan16;
+		can1 = &mcu_mcan0;
+		can2 = &mcu_mcan1;
+		can3 = &main_mcan3;
+		can4 = &main_mcan5;
+	};
+
+	chosen { };
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu-map {
+			cluster0: cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+
+				core1 {
+					cpu = <&cpu1>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a72";
+			reg = <0x000>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&L2_0>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a72";
+			reg = <0x001>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&L2_0>;
+		};
+	};
+
+	L2_0: l2-cache0 {
+		compatible = "cache";
+		cache-level = <2>;
+		cache-size = <0x100000>;
+		cache-line-size = <64>;
+		cache-sets = <1024>;
+		next-level-cache = <&msmc_l3>;
+	};
+
+	msmc_l3: l3-cache0 {
+		compatible = "cache";
+		cache-level = <3>;
+	};
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+
+		psci: psci {
+			compatible = "arm,psci-1.0";
+			method = "smc";
+		};
+	};
+
+	a72_timer0: timer-cl0-cpu0 {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* cntpsirq */
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* cntpnsirq */
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* cntvirq */
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* cnthpirq */
+
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a72-pmu";
+		/* Recommendation from GIC500 TRM Table A.3 */
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	cbass_main: bus@100000 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x00 0x00100000 0x00 0x00100000 0x00 0x00020000>, /* ctrl mmr */
+			 <0x00 0x00600000 0x00 0x00600000 0x00 0x00031100>, /* GPIO */
+			 <0x00 0x01000000 0x00 0x01000000 0x00 0x0d000000>, /* Most peripherals */
+			 <0x00 0x0d800000 0x00 0x0d800000 0x00 0x00800000>, /* PCIe Core*/
+			 <0x00 0x18000000 0x00 0x18000000 0x00 0x08000000>, /* PCIe1 DAT0 */
+			 <0x00 0x64800000 0x00 0x64800000 0x00 0x0070c000>, /* C71_1 */
+			 <0x00 0x65800000 0x00 0x65800000 0x00 0x0070c000>, /* C71_2 */
+			 <0x00 0x70000000 0x00 0x70000000 0x00 0x00400000>, /* MSMC RAM */
+			 <0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>, /* MAIN NAVSS */
+			 <0x41 0x00000000 0x41 0x00000000 0x01 0x00000000>, /* PCIe1 DAT1 */
+			 <0x4e 0x20000000 0x4e 0x20000000 0x00 0x00080000>, /* GPU */
+
+			 /* MCUSS_WKUP Range */
+			 <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>,
+			 <0x00 0x40200000 0x00 0x40200000 0x00 0x00998400>,
+			 <0x00 0x40f00000 0x00 0x40f00000 0x00 0x00020000>,
+			 <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>,
+			 <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>,
+			 <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00100000>,
+			 <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>,
+			 <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>,
+			 <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>,
+			 <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>,
+			 <0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>,
+			 <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>,
+			 <0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>;
+
+		cbass_mcu_wakeup: bus@28380000 {
+			compatible = "simple-bus";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>, /* MCU NAVSS*/
+				 <0x00 0x40200000 0x00 0x40200000 0x00 0x00998400>, /* First peripheral window */
+				 <0x00 0x40f00000 0x00 0x40f00000 0x00 0x00020000>, /* CTRL_MMR0 */
+				 <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>, /* MCU R5F Core0 */
+				 <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>, /* MCU R5F Core1 */
+				 <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00100000>, /* MCU SRAM */
+				 <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>, /* WKUP peripheral window */
+				 <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>, /* MMRs, remaining NAVSS */
+				 <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, /* CPSW */
+				 <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>, /* OSPI register space */
+				 <0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>, /* FSS OSPI0/1 data region 0 */
+				 <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>, /* FSS OSPI0 data region 3 */
+				 <0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>; /* FSS OSPI1 data region 3*/
+
+		};
+
+	};
+};
+
+/* Now include peripherals from each bus segment */
+#include "k3-j721s2-main.dtsi"
+#include "k3-j721s2-mcu-wakeup.dtsi"
diff --git a/dts/src/mips/brcm/bcm7425.dtsi b/dts/src/mips/brcm/bcm7425.dtsi
index aa0b2d39c9..62588c53d3 100644
--- a/dts/src/mips/brcm/bcm7425.dtsi
+++ b/dts/src/mips/brcm/bcm7425.dtsi
@@ -584,4 +584,34 @@
 			};
 		};
 	};
+
+	pcie_0: pcie@8b20000 {
+		status = "disabled";
+		compatible = "brcm,bcm7425-pcie";
+
+		ranges = <0x02000000 0x0 0xd0000000 0xd0000000 0x0 0x08000000
+			  0x02000000 0x0 0xd8000000 0xd8000000 0x0 0x08000000
+			  0x02000000 0x0 0xe0000000 0xe0000000 0x0 0x08000000
+			  0x02000000 0x0 0xe8000000 0xe8000000 0x0 0x08000000>;
+
+		reg = <0x10410000 0x19310>;
+		aspm-no-l0s;
+		device_type = "pci";
+		msi-controller;
+		msi-parent = <&pcie_0>;
+		#address-cells = <0x3>;
+		#size-cells = <0x2>;
+		bus-range = <0x0 0xff>;
+		interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+		linux,pci-domain = <0x0>;
+
+		interrupt-parent = <&periph_intc>;
+		interrupts = <37>, <37>;
+		interrupt-names = "pcie", "msi";
+		#interrupt-cells = <0x1>;
+		interrupt-map = <0 0 0 1 &periph_intc 0x21
+				 0 0 0 1 &periph_intc 0x22
+				 0 0 0 1 &periph_intc 0x23
+				 0 0 0 1 &periph_intc 0x24>;
+	};
 };
diff --git a/dts/src/mips/brcm/bcm7435.dtsi b/dts/src/mips/brcm/bcm7435.dtsi
index 8398b7f68b..8c001b944c 100644
--- a/dts/src/mips/brcm/bcm7435.dtsi
+++ b/dts/src/mips/brcm/bcm7435.dtsi
@@ -599,4 +599,34 @@
 			};
 		};
 	};
+
+	pcie_0: pcie@8b20000 {
+		status = "disabled";
+		compatible = "brcm,bcm7435-pcie";
+
+		ranges = <0x02000000 0x0 0xd0000000 0xd0000000 0x0 0x08000000
+			  0x02000000 0x0 0xd8000000 0xd8000000 0x0 0x08000000
+			  0x02000000 0x0 0xe0000000 0xe0000000 0x0 0x08000000
+			  0x02000000 0x0 0xe8000000 0xe8000000 0x0 0x08000000>;
+
+		reg = <0x10410000 0x19310>;
+		aspm-no-l0s;
+		device_type = "pci";
+		msi-controller;
+		msi-parent = <&pcie_0>;
+		#address-cells = <0x3>;
+		#size-cells = <0x2>;
+		bus-range = <0x0 0xff>;
+		interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+		linux,pci-domain = <0x0>;
+
+		interrupt-parent = <&periph_intc>;
+		interrupts = <39>, <39>;
+		interrupt-names = "pcie", "msi";
+		#interrupt-cells = <0x1>;
+		interrupt-map = <0 0 0 1 &periph_intc 0x23
+				 0 0 0 1 &periph_intc 0x24
+				 0 0 0 1 &periph_intc 0x25
+				 0 0 0 1 &periph_intc 0x26>;
+	};
 };
diff --git a/dts/src/mips/brcm/bcm97425svmb.dts b/dts/src/mips/brcm/bcm97425svmb.dts
index 9efecfe1e0..f389349343 100644
--- a/dts/src/mips/brcm/bcm97425svmb.dts
+++ b/dts/src/mips/brcm/bcm97425svmb.dts
@@ -152,3 +152,12 @@
 &waketimer {
 	status = "okay";
 };
+
+&pcie_0 {
+	status = "okay";
+	/* 1GB Memc0, 1GB Memc1 */
+	brcm,scb-sizes = <0 0x40000000 0 0x40000000>;
+	dma-ranges = <0x43000000 0x00000000 0x00000000 0x00000000 0x0 0x10000000
+		      0x43000000 0x00000000 0x10000000 0x20000000 0x0 0x30000000
+		      0x43000000 0x00000000 0x40000000 0x90000000 0x0 0x40000000>;
+};
diff --git a/dts/src/mips/brcm/bcm97435svmb.dts b/dts/src/mips/brcm/bcm97435svmb.dts
index b653c6ff74..a0cf53e23c 100644
--- a/dts/src/mips/brcm/bcm97435svmb.dts
+++ b/dts/src/mips/brcm/bcm97435svmb.dts
@@ -128,3 +128,12 @@
 &waketimer {
 	status = "okay";
 };
+
+&pcie_0 {
+	status = "okay";
+	/* 1GB Memc0, 1GB Memc1 */
+	brcm,scb-sizes = <0 0x40000000 0 0x40000000>;
+	dma-ranges = <0x43000000 0x00000000 0x00000000 0x00000000 0x0 0x10000000
+		      0x43000000 0x00000000 0x10000000 0x20000000 0x0 0x30000000
+		      0x43000000 0x00000000 0x40000000 0x90000000 0x0 0x40000000>;
+};
diff --git a/dts/src/mips/ingenic/ci20.dts b/dts/src/mips/ingenic/ci20.dts
index b249a4f0f6..3e336b3dbb 100644
--- a/dts/src/mips/ingenic/ci20.dts
+++ b/dts/src/mips/ingenic/ci20.dts
@@ -78,6 +78,18 @@
 		enable-active-high;
 	};
 
+	hdmi_out: connector {
+		compatible = "hdmi-connector";
+		label = "HDMI OUT";
+		type = "a";
+
+		port {
+			hdmi_con: endpoint {
+				remote-endpoint = <&dw_hdmi_out>;
+			};
+		};
+	};
+
 	ir: ir {
 		compatible = "gpio-ir-receiver";
 		gpios = <&gpe 3 GPIO_ACTIVE_LOW>;
@@ -102,6 +114,17 @@
 		gpio = <&gpf 14 GPIO_ACTIVE_LOW>;
 		enable-active-high;
 	};
+
+	hdmi_power: fixedregulator@3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "hdmi_power";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		gpio = <&gpa 25 0>;
+		enable-active-high;
+	};
 };
 
 &ext {
@@ -114,11 +137,12 @@
 	 * precision.
 	 */
 	assigned-clocks = <&cgu JZ4780_CLK_OTGPHY>, <&cgu JZ4780_CLK_RTC>,
-			  <&cgu JZ4780_CLK_SSIPLL>, <&cgu JZ4780_CLK_SSI>;
+			  <&cgu JZ4780_CLK_SSIPLL>, <&cgu JZ4780_CLK_SSI>,
+			  <&cgu JZ4780_CLK_HDMI>;
 	assigned-clock-parents = <0>, <&cgu JZ4780_CLK_RTCLK>,
 				 <&cgu JZ4780_CLK_MPLL>,
 				 <&cgu JZ4780_CLK_SSIPLL>;
-	assigned-clock-rates = <48000000>, <0>, <54000000>;
+	assigned-clock-rates = <48000000>, <0>, <54000000>, <0>, <27000000>;
 };
 
 &tcu {
@@ -509,6 +533,12 @@
 		bias-disable;
 	};
 
+	pins_hdmi_ddc: hdmi_ddc {
+		function = "hdmi-ddc";
+		groups = "hdmi-ddc";
+		bias-disable;
+	};
+
 	pins_nemc: nemc {
 		function = "nemc";
 		groups = "nemc-data", "nemc-cle-ale", "nemc-rd-we", "nemc-frd-fwe";
@@ -539,3 +569,41 @@
 		bias-disable;
 	};
 };
+
+&hdmi {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pins_hdmi_ddc>;
+
+	hdmi-5v-supply = <&hdmi_power>;
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			dw_hdmi_in: endpoint {
+				remote-endpoint = <&lcd_out>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			dw_hdmi_out: endpoint {
+				remote-endpoint = <&hdmi_con>;
+			};
+		};
+	};
+};
+
+&lcdc0 {
+	status = "okay";
+
+	port {
+		lcd_out: endpoint {
+			remote-endpoint = <&dw_hdmi_in>;
+		};
+	};
+};
diff --git a/dts/src/mips/ingenic/jz4725b.dtsi b/dts/src/mips/ingenic/jz4725b.dtsi
index 0c6a5a4266..e9e48022f6 100644
--- a/dts/src/mips/ingenic/jz4725b.dtsi
+++ b/dts/src/mips/ingenic/jz4725b.dtsi
@@ -321,7 +321,7 @@
 
 	lcd: lcd-controller@13050000 {
 		compatible = "ingenic,jz4725b-lcd";
-		reg = <0x13050000 0x1000>;
+		reg = <0x13050000 0x130>; /* tbc */
 
 		interrupt-parent = <&intc>;
 		interrupts = <31>;
diff --git a/dts/src/mips/ingenic/jz4740.dtsi b/dts/src/mips/ingenic/jz4740.dtsi
index 772542e1f2..7f76cba03a 100644
--- a/dts/src/mips/ingenic/jz4740.dtsi
+++ b/dts/src/mips/ingenic/jz4740.dtsi
@@ -323,7 +323,7 @@
 
 	lcd: lcd-controller@13050000 {
 		compatible = "ingenic,jz4740-lcd";
-		reg = <0x13050000 0x1000>;
+		reg = <0x13050000 0x60>; /* LCDCMD1+4 */
 
 		interrupt-parent = <&intc>;
 		interrupts = <30>;
diff --git a/dts/src/mips/ingenic/jz4770.dtsi b/dts/src/mips/ingenic/jz4770.dtsi
index dfe74328ae..bda0a3a86e 100644
--- a/dts/src/mips/ingenic/jz4770.dtsi
+++ b/dts/src/mips/ingenic/jz4770.dtsi
@@ -399,7 +399,7 @@
 
 	lcd: lcd-controller@13050000 {
 		compatible = "ingenic,jz4770-lcd";
-		reg = <0x13050000 0x300>;
+		reg = <0x13050000 0x130>; /* tbc */
 
 		interrupt-parent = <&intc>;
 		interrupts = <31>;
diff --git a/dts/src/mips/ingenic/jz4780.dtsi b/dts/src/mips/ingenic/jz4780.dtsi
index b0a4e2e019..3f9ea47a10 100644
--- a/dts/src/mips/ingenic/jz4780.dtsi
+++ b/dts/src/mips/ingenic/jz4780.dtsi
@@ -444,6 +444,46 @@
 		status = "disabled";
 	};
 
+	hdmi: hdmi@10180000 {
+		compatible = "ingenic,jz4780-dw-hdmi";
+		reg = <0x10180000 0x8000>;
+		reg-io-width = <4>;
+
+		clocks = <&cgu JZ4780_CLK_AHB0>, <&cgu JZ4780_CLK_HDMI>;
+		clock-names = "iahb", "isfr";
+
+		interrupt-parent = <&intc>;
+		interrupts = <3>;
+
+		status = "disabled";
+	};
+
+	lcdc0: lcdc0@13050000 {
+		compatible = "ingenic,jz4780-lcd";
+		reg = <0x13050000 0x1800>;
+
+		clocks = <&cgu JZ4780_CLK_TVE>, <&cgu JZ4780_CLK_LCD0PIXCLK>;
+		clock-names = "lcd", "lcd_pclk";
+
+		interrupt-parent = <&intc>;
+		interrupts = <31>;
+
+		status = "disabled";
+	};
+
+	lcdc1: lcdc1@130a0000 {
+		compatible = "ingenic,jz4780-lcd";
+		reg = <0x130a0000 0x1800>;
+
+		clocks = <&cgu JZ4780_CLK_TVE>, <&cgu JZ4780_CLK_LCD1PIXCLK>;
+		clock-names = "lcd", "lcd_pclk";
+
+		interrupt-parent = <&intc>;
+		interrupts = <23>;
+
+		status = "disabled";
+	};
+
 	nemc: nemc@13410000 {
 		compatible = "ingenic,jz4780-nemc", "simple-mfd";
 		reg = <0x13410000 0x10000>;
diff --git a/dts/src/mips/loongson/loongson64-2k1000.dtsi b/dts/src/mips/loongson/loongson64-2k1000.dtsi
index bfc3d3243e..8143a61111 100644
--- a/dts/src/mips/loongson/loongson64-2k1000.dtsi
+++ b/dts/src/mips/loongson/loongson64-2k1000.dtsi
@@ -52,6 +52,11 @@
 			0 0x40000000 0 0x40000000 0 0x40000000
 			0xfe 0x00000000 0xfe 0x00000000 0 0x40000000>;
 
+		pm: reset-controller@1fe07000 {
+			compatible = "loongson,ls2k-pm";
+			reg = <0 0x1fe07000 0 0x422>;
+		};
+
 		liointc0: interrupt-controller@1fe11400 {
 			compatible = "loongson,liointc-2.0";
 			reg = <0 0x1fe11400 0 0x40>,
diff --git a/dts/src/powerpc/bluestone.dts b/dts/src/powerpc/bluestone.dts
index aa1ae94cd7..6971595319 100644
--- a/dts/src/powerpc/bluestone.dts
+++ b/dts/src/powerpc/bluestone.dts
@@ -366,30 +366,5 @@
 				0x0 0x0 0x0 0x3 &UIC3 0xe 0x4 /* swizzled int C */
 				0x0 0x0 0x0 0x4 &UIC3 0xf 0x4 /* swizzled int D */>;
 		};
-
-		MSI: ppc4xx-msi@C10000000 {
-			compatible = "amcc,ppc4xx-msi", "ppc4xx-msi";
-			reg = < 0xC 0x10000000 0x100
-				0xC 0x10000000 0x100>;
-			sdr-base = <0x36C>;
-			msi-data = <0x00004440>;
-			msi-mask = <0x0000ffe0>;
-			interrupts =<0 1 2 3 4 5 6 7>;
-			interrupt-parent = <&MSI>;
-			#interrupt-cells = <1>;
-			#address-cells = <0>;
-			#size-cells = <0>;
-			msi-available-ranges = <0x0 0x100>;
-			interrupt-map = <
-				0 &UIC3 0x18 1
-				1 &UIC3 0x19 1
-				2 &UIC3 0x1A 1
-				3 &UIC3 0x1B 1
-				4 &UIC3 0x1C 1
-				5 &UIC3 0x1D 1
-				6 &UIC3 0x1E 1
-				7 &UIC3 0x1F 1
-			>;
-		};
 	};
 };
diff --git a/dts/src/powerpc/canyonlands.dts b/dts/src/powerpc/canyonlands.dts
index c5fbb08e0a..5db1bff6b2 100644
--- a/dts/src/powerpc/canyonlands.dts
+++ b/dts/src/powerpc/canyonlands.dts
@@ -544,23 +544,5 @@
 				0x0 0x0 0x0 0x3 &UIC3 0x12 0x4 /* swizzled int C */
 				0x0 0x0 0x0 0x4 &UIC3 0x13 0x4 /* swizzled int D */>;
 		};
-
-		MSI: ppc4xx-msi@C10000000 {
-			compatible = "amcc,ppc4xx-msi", "ppc4xx-msi";
-			reg = < 0xC 0x10000000 0x100>;
-			sdr-base = <0x36C>;
-			msi-data = <0x00000000>;
-			msi-mask = <0x44440000>;
-			interrupt-count = <3>;
-			interrupts = <0 1 2 3>;
-			interrupt-parent = <&UIC3>;
-			#interrupt-cells = <1>;
-			#address-cells = <0>;
-			#size-cells = <0>;
-			interrupt-map = <0 &UIC3 0x18 1
-					1 &UIC3 0x19 1
-					2 &UIC3 0x1A 1
-					3 &UIC3 0x1B 1>;
-		};
 	};
 };
diff --git a/dts/src/powerpc/digsy_mtc.dts b/dts/src/powerpc/digsy_mtc.dts
index 57024a4c1e..dfaf974c0c 100644
--- a/dts/src/powerpc/digsy_mtc.dts
+++ b/dts/src/powerpc/digsy_mtc.dts
@@ -25,14 +25,6 @@
 			status = "disabled";
 		};
 
-		spi@f00 {
-			msp430@0 {
-				compatible = "spidev";
-				spi-max-frequency = <32000>;
-				reg = <0>;
-			};
-		};
-
 		psc@2000 {		// PSC1
 			status = "disabled";
 		};
diff --git a/dts/src/powerpc/fsl/qoriq-fman3l-0.dtsi b/dts/src/powerpc/fsl/qoriq-fman3l-0.dtsi
index c90702b04a..48e5cd6159 100644
--- a/dts/src/powerpc/fsl/qoriq-fman3l-0.dtsi
+++ b/dts/src/powerpc/fsl/qoriq-fman3l-0.dtsi
@@ -79,6 +79,7 @@ fman0: fman@400000 {
 		#size-cells = <0>;
 		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
 		reg = <0xfc000 0x1000>;
+		fsl,erratum-a009885;
 	};
 
 	xmdio0: mdio@fd000 {
@@ -86,6 +87,7 @@ fman0: fman@400000 {
 		#size-cells = <0>;
 		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
 		reg = <0xfd000 0x1000>;
+		fsl,erratum-a009885;
 	};
 };
 
diff --git a/dts/src/powerpc/katmai.dts b/dts/src/powerpc/katmai.dts
index a8f353229f..4262b2bbd6 100644
--- a/dts/src/powerpc/katmai.dts
+++ b/dts/src/powerpc/katmai.dts
@@ -442,24 +442,6 @@
 				0x0 0x0 0x0 0x4 &UIC3 0xb 0x4 /* swizzled int D */>;
 		};
 
-		MSI: ppc4xx-msi@400300000 {
-				compatible = "amcc,ppc4xx-msi", "ppc4xx-msi";
-				reg = < 0x4 0x00300000 0x100>;
-				sdr-base = <0x3B0>;
-				msi-data = <0x00000000>;
-				msi-mask = <0x44440000>;
-				interrupt-count = <3>;
-				interrupts =<0 1 2 3>;
-				interrupt-parent = <&UIC0>;
-				#interrupt-cells = <1>;
-				#address-cells = <0>;
-				#size-cells = <0>;
-				interrupt-map = <0 &UIC0 0xC 1
-					1 &UIC0 0x0D 1
-					2 &UIC0 0x0E 1
-					3 &UIC0 0x0F 1>;
-		};
-
 		I2O: i2o@400100000 {
 			compatible = "ibm,i2o-440spe";
 			reg = <0x00000004 0x00100000 0x100>;
diff --git a/dts/src/powerpc/kilauea.dts b/dts/src/powerpc/kilauea.dts
index a709fb47a1..c07a7525a7 100644
--- a/dts/src/powerpc/kilauea.dts
+++ b/dts/src/powerpc/kilauea.dts
@@ -403,33 +403,5 @@
 				0x0 0x0 0x0 0x3 &UIC2 0xd 0x4 /* swizzled int C */
 				0x0 0x0 0x0 0x4 &UIC2 0xe 0x4 /* swizzled int D */>;
 		};
-
-		MSI: ppc4xx-msi@C10000000 {
-			compatible = "amcc,ppc4xx-msi", "ppc4xx-msi";
-			reg = <0xEF620000 0x100>;
-			sdr-base = <0x4B0>;
-			msi-data = <0x00000000>;
-			msi-mask = <0x44440000>;
-			interrupt-count = <12>;
-			interrupts = <0 1 2 3 4 5 6 7 8 9 0xA 0xB 0xC 0xD>;
-			interrupt-parent = <&UIC2>;
-			#interrupt-cells = <1>;
-			#address-cells = <0>;
-			#size-cells = <0>;
-			interrupt-map = <0 &UIC2 0x10 1
-					1 &UIC2 0x11 1
-					2 &UIC2 0x12 1
-					2 &UIC2 0x13 1
-					2 &UIC2 0x14 1
-					2 &UIC2 0x15 1
-					2 &UIC2 0x16 1
-					2 &UIC2 0x17 1
-					2 &UIC2 0x18 1
-					2 &UIC2 0x19 1
-					2 &UIC2 0x1A 1
-					2 &UIC2 0x1B 1
-					2 &UIC2 0x1C 1
-					3 &UIC2 0x1D 1>;
-		};
 	};
 };
diff --git a/dts/src/powerpc/o2d.dtsi b/dts/src/powerpc/o2d.dtsi
index b55a9e5bd8..7e52509fa5 100644
--- a/dts/src/powerpc/o2d.dtsi
+++ b/dts/src/powerpc/o2d.dtsi
@@ -34,12 +34,6 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			cell-index = <0>;
-
-			spidev@0 {
-				compatible = "spidev";
-				spi-max-frequency = <250000>;
-				reg = <0>;
-			};
 		};
 
 		psc@2200 {		// PSC2
diff --git a/dts/src/powerpc/redwood.dts b/dts/src/powerpc/redwood.dts
index f38035a1f4..3c849e23e5 100644
--- a/dts/src/powerpc/redwood.dts
+++ b/dts/src/powerpc/redwood.dts
@@ -358,25 +358,6 @@
 				0x0 0x0 0x0 0x4 &UIC3 0xb 0x4 /* swizzled int D */>;
 		};
 
-		MSI: ppc4xx-msi@400300000 {
-				compatible = "amcc,ppc4xx-msi", "ppc4xx-msi";
-				reg = < 0x4 0x00300000 0x100
-					0x4 0x00300000 0x100>;
-				sdr-base = <0x3B0>;
-				msi-data = <0x00000000>;
-				msi-mask = <0x44440000>;
-				interrupt-count = <3>;
-				interrupts =<0 1 2 3>;
-				interrupt-parent = <&UIC0>;
-				#interrupt-cells = <1>;
-				#address-cells = <0>;
-				#size-cells = <0>;
-				interrupt-map = <0 &UIC0 0xC 1
-					1 &UIC0 0x0D 1
-					2 &UIC0 0x0E 1
-					3 &UIC0 0x0F 1>;
-		};
-
 	};
 
 
diff --git a/dts/src/powerpc/wii.dts b/dts/src/powerpc/wii.dts
index e9c945b123..e46143c323 100644
--- a/dts/src/powerpc/wii.dts
+++ b/dts/src/powerpc/wii.dts
@@ -168,6 +168,11 @@
 			interrupts = <14>;
 		};
 
+		srnprot@d800060 {
+			compatible = "nintendo,hollywood-srnprot";
+			reg = <0x0d800060 0x4>;
+		};
+
 		GPIO: gpio@d8000c0 {
 			#gpio-cells = <2>;
 			compatible = "nintendo,hollywood-gpio";
diff --git a/dts/src/riscv/canaan/k210.dtsi b/dts/src/riscv/canaan/k210.dtsi
index 5e8ca81424..56f57118c6 100644
--- a/dts/src/riscv/canaan/k210.dtsi
+++ b/dts/src/riscv/canaan/k210.dtsi
@@ -103,8 +103,8 @@
 		clint0: timer@2000000 {
 			compatible = "canaan,k210-clint", "sifive,clint0";
 			reg = <0x2000000 0xC000>;
-			interrupts-extended = <&cpu0_intc 3 &cpu0_intc 7
-					      &cpu1_intc 3 &cpu1_intc 7>;
+			interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>,
+					      <&cpu1_intc 3>, <&cpu1_intc 7>;
 		};
 
 		plic0: interrupt-controller@c000000 {
@@ -113,7 +113,7 @@
 			compatible = "canaan,k210-plic", "sifive,plic-1.0.0";
 			reg = <0xC000000 0x4000000>;
 			interrupt-controller;
-			interrupts-extended = <&cpu0_intc 11 &cpu1_intc 11>;
+			interrupts-extended = <&cpu0_intc 11>, <&cpu1_intc 11>;
 			riscv,ndev = <65>;
 		};
 
@@ -130,10 +130,11 @@
 			compatible = "canaan,k210-gpiohs", "sifive,gpio0";
 			reg = <0x38001000 0x1000>;
 			interrupt-controller;
-			interrupts = <34 35 36 37 38 39 40 41
-				      42 43 44 45 46 47 48 49
-				      50 51 52 53 54 55 56 57
-				      58 59 60 61 62 63 64 65>;
+			interrupts = <34>, <35>, <36>, <37>, <38>, <39>, <40>,
+				     <41>, <42>, <43>, <44>, <45>, <46>, <47>,
+				     <48>, <49>, <50>, <51>, <52>, <53>, <54>,
+				     <55>, <56>, <57>, <58>, <59>, <60>, <61>,
+				     <62>, <63>, <64>, <65>;
 			gpio-controller;
 			ngpios = <32>;
 		};
@@ -141,7 +142,7 @@
 		dmac0: dma-controller@50000000 {
 			compatible = "snps,axi-dma-1.01a";
 			reg = <0x50000000 0x1000>;
-			interrupts = <27 28 29 30 31 32>;
+			interrupts = <27>, <28>, <29>, <30>, <31>, <32>;
 			#dma-cells = <1>;
 			clocks = <&sysclk K210_CLK_DMA>, <&sysclk K210_CLK_DMA>;
 			clock-names = "core-clk", "cfgr-clk";
@@ -316,7 +317,7 @@
 			timer0: timer@502d0000 {
 				compatible = "snps,dw-apb-timer";
 				reg = <0x502D0000 0x100>;
-				interrupts = <14 15>;
+				interrupts = <14>, <15>;
 				clocks = <&sysclk K210_CLK_TIMER0>,
 					 <&sysclk K210_CLK_APB0>;
 				clock-names = "timer", "pclk";
@@ -326,7 +327,7 @@
 			timer1: timer@502e0000 {
 				compatible = "snps,dw-apb-timer";
 				reg = <0x502E0000 0x100>;
-				interrupts = <16 17>;
+				interrupts = <16>, <17>;
 				clocks = <&sysclk K210_CLK_TIMER1>,
 					 <&sysclk K210_CLK_APB0>;
 				clock-names = "timer", "pclk";
@@ -336,7 +337,7 @@
 			timer2: timer@502f0000 {
 				compatible = "snps,dw-apb-timer";
 				reg = <0x502F0000 0x100>;
-				interrupts = <18 19>;
+				interrupts = <18>, <19>;
 				clocks = <&sysclk K210_CLK_TIMER2>,
 					 <&sysclk K210_CLK_APB0>;
 				clock-names = "timer", "pclk";
diff --git a/dts/src/riscv/canaan/sipeed_maix_bit.dts b/dts/src/riscv/canaan/sipeed_maix_bit.dts
index 0bcaf35045..984872f3d3 100644
--- a/dts/src/riscv/canaan/sipeed_maix_bit.dts
+++ b/dts/src/riscv/canaan/sipeed_maix_bit.dts
@@ -199,7 +199,7 @@
 };
 
 &spi3 {
-	spi-flash@0 {
+	flash@0 {
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <50000000>;
diff --git a/dts/src/riscv/canaan/sipeed_maix_dock.dts b/dts/src/riscv/canaan/sipeed_maix_dock.dts
index ac8a03f586..7ba99b4da3 100644
--- a/dts/src/riscv/canaan/sipeed_maix_dock.dts
+++ b/dts/src/riscv/canaan/sipeed_maix_dock.dts
@@ -201,7 +201,7 @@
 };
 
 &spi3 {
-	spi-flash@0 {
+	flash@0 {
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <50000000>;
diff --git a/dts/src/riscv/canaan/sipeed_maix_go.dts b/dts/src/riscv/canaan/sipeed_maix_go.dts
index 623998194b..be9b12c9b3 100644
--- a/dts/src/riscv/canaan/sipeed_maix_go.dts
+++ b/dts/src/riscv/canaan/sipeed_maix_go.dts
@@ -209,7 +209,7 @@
 };
 
 &spi3 {
-	spi-flash@0 {
+	flash@0 {
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <50000000>;
diff --git a/dts/src/riscv/canaan/sipeed_maixduino.dts b/dts/src/riscv/canaan/sipeed_maixduino.dts
index cf605ba0d6..031c0c28f8 100644
--- a/dts/src/riscv/canaan/sipeed_maixduino.dts
+++ b/dts/src/riscv/canaan/sipeed_maixduino.dts
@@ -174,7 +174,7 @@
 };
 
 &spi3 {
-	spi-flash@0 {
+	flash@0 {
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <50000000>;
diff --git a/dts/src/riscv/microchip/microchip-mpfs-icicle-kit.dts b/dts/src/riscv/microchip/microchip-mpfs-icicle-kit.dts
index fc1e5869df..0c748ae1b0 100644
--- a/dts/src/riscv/microchip/microchip-mpfs-icicle-kit.dts
+++ b/dts/src/riscv/microchip/microchip-mpfs-icicle-kit.dts
@@ -35,6 +35,10 @@
 	};
 };
 
+&refclk {
+	clock-frequency = <600000000>;
+};
+
 &serial0 {
 	status = "okay";
 };
diff --git a/dts/src/riscv/microchip/microchip-mpfs.dtsi b/dts/src/riscv/microchip/microchip-mpfs.dtsi
index c9f6d205d2..869aaf0d5c 100644
--- a/dts/src/riscv/microchip/microchip-mpfs.dtsi
+++ b/dts/src/riscv/microchip/microchip-mpfs.dtsi
@@ -9,9 +9,6 @@
 	model = "Microchip PolarFire SoC";
 	compatible = "microchip,mpfs";
 
-	chosen {
-	};
-
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -142,6 +139,11 @@
 		};
 	};
 
+	refclk: msspllclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+	};
+
 	soc {
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -156,62 +158,48 @@
 			cache-size = <2097152>;
 			cache-unified;
 			interrupt-parent = <&plic>;
-			interrupts = <1 2 3>;
+			interrupts = <1>, <2>, <3>;
 			reg = <0x0 0x2010000 0x0 0x1000>;
 		};
 
 		clint@2000000 {
 			compatible = "sifive,fu540-c000-clint", "sifive,clint0";
 			reg = <0x0 0x2000000 0x0 0xC000>;
-			interrupts-extended = <&cpu0_intc 3 &cpu0_intc 7
-						&cpu1_intc 3 &cpu1_intc 7
-						&cpu2_intc 3 &cpu2_intc 7
-						&cpu3_intc 3 &cpu3_intc 7
-						&cpu4_intc 3 &cpu4_intc 7>;
+			interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>,
+					      <&cpu1_intc 3>, <&cpu1_intc 7>,
+					      <&cpu2_intc 3>, <&cpu2_intc 7>,
+					      <&cpu3_intc 3>, <&cpu3_intc 7>,
+					      <&cpu4_intc 3>, <&cpu4_intc 7>;
 		};
 
 		plic: interrupt-controller@c000000 {
-			#interrupt-cells = <1>;
 			compatible = "sifive,fu540-c000-plic", "sifive,plic-1.0.0";
 			reg = <0x0 0xc000000 0x0 0x4000000>;
-			riscv,ndev = <186>;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
 			interrupt-controller;
-			interrupts-extended = <&cpu0_intc 11
-					&cpu1_intc 11 &cpu1_intc 9
-					&cpu2_intc 11 &cpu2_intc 9
-					&cpu3_intc 11 &cpu3_intc 9
-					&cpu4_intc 11 &cpu4_intc 9>;
+			interrupts-extended = <&cpu0_intc 11>,
+					      <&cpu1_intc 11>, <&cpu1_intc 9>,
+					      <&cpu2_intc 11>, <&cpu2_intc 9>,
+					      <&cpu3_intc 11>, <&cpu3_intc 9>,
+					      <&cpu4_intc 11>, <&cpu4_intc 9>;
+			riscv,ndev = <186>;
 		};
 
 		dma@3000000 {
 			compatible = "sifive,fu540-c000-pdma";
 			reg = <0x0 0x3000000 0x0 0x8000>;
 			interrupt-parent = <&plic>;
-			interrupts = <23 24 25 26 27 28 29 30>;
+			interrupts = <23>, <24>, <25>, <26>, <27>, <28>, <29>,
+				     <30>;
 			#dma-cells = <1>;
 		};
 
-		refclk: refclk {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <600000000>;
-			clock-output-names = "msspllclk";
-		};
-
 		clkcfg: clkcfg@20002000 {
 			compatible = "microchip,mpfs-clkcfg";
 			reg = <0x0 0x20002000 0x0 0x1000>;
-			reg-names = "mss_sysreg";
 			clocks = <&refclk>;
 			#clock-cells = <1>;
-			clock-output-names = "cpu", "axi", "ahb", "envm",	/* 0-3   */
-				 "mac0", "mac1", "mmc", "timer",		/* 4-7   */
-				"mmuart0", "mmuart1", "mmuart2", "mmuart3",	/* 8-11  */
-				"mmuart4", "spi0", "spi1", "i2c0",		/* 12-15 */
-				"i2c1", "can0", "can1", "usb",			/* 16-19 */
-				"rsvd", "rtc", "qspi", "gpio0",			/* 20-23 */
-				"gpio1", "gpio2", "ddrc", "fic0",		/* 24-27 */
-				"fic1", "fic2", "fic3", "athena", "cfm";	/* 28-32 */
 		};
 
 		serial0: serial@20000000 {
@@ -267,7 +255,7 @@
 			compatible = "microchip,mpfs-sd4hc", "cdns,sd4hc";
 			reg = <0x0 0x20008000 0x0 0x1000>;
 			interrupt-parent = <&plic>;
-			interrupts = <88 89>;
+			interrupts = <88>, <89>;
 			clocks = <&clkcfg 6>;
 			max-frequency = <200000000>;
 			status = "disabled";
@@ -277,7 +265,7 @@
 			compatible = "cdns,macb";
 			reg = <0x0 0x20110000 0x0 0x2000>;
 			interrupt-parent = <&plic>;
-			interrupts = <64 65 66 67>;
+			interrupts = <64>, <65>, <66>, <67>;
 			local-mac-address = [00 00 00 00 00 00];
 			clocks = <&clkcfg 4>, <&clkcfg 2>;
 			clock-names = "pclk", "hclk";
@@ -290,7 +278,7 @@
 			compatible = "cdns,macb";
 			reg = <0x0 0x20112000 0x0 0x2000>;
 			interrupt-parent = <&plic>;
-			interrupts = <70 71 72 73>;
+			interrupts = <70>, <71>, <72>, <73>;
 			local-mac-address = [00 00 00 00 00 00];
 			clocks = <&clkcfg 5>, <&clkcfg 2>;
 			status = "disabled";
diff --git a/dts/src/riscv/sifive/fu540-c000.dtsi b/dts/src/riscv/sifive/fu540-c000.dtsi
index 0655b5c420..3eef52b1a5 100644
--- a/dts/src/riscv/sifive/fu540-c000.dtsi
+++ b/dts/src/riscv/sifive/fu540-c000.dtsi
@@ -137,20 +137,21 @@
 	soc {
 		#address-cells = <2>;
 		#size-cells = <2>;
-		compatible = "sifive,fu540-c000", "sifive,fu540", "simple-bus";
+		compatible = "simple-bus";
 		ranges;
 		plic0: interrupt-controller@c000000 {
-			#interrupt-cells = <1>;
 			compatible = "sifive,fu540-c000-plic", "sifive,plic-1.0.0";
 			reg = <0x0 0xc000000 0x0 0x4000000>;
-			riscv,ndev = <53>;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
 			interrupt-controller;
-			interrupts-extended = <
-				&cpu0_intc 0xffffffff
-				&cpu1_intc 0xffffffff &cpu1_intc 9
-				&cpu2_intc 0xffffffff &cpu2_intc 9
-				&cpu3_intc 0xffffffff &cpu3_intc 9
-				&cpu4_intc 0xffffffff &cpu4_intc 9>;
+			interrupts-extended =
+				<&cpu0_intc 0xffffffff>,
+				<&cpu1_intc 0xffffffff>, <&cpu1_intc 9>,
+				<&cpu2_intc 0xffffffff>, <&cpu2_intc 9>,
+				<&cpu3_intc 0xffffffff>, <&cpu3_intc 9>,
+				<&cpu4_intc 0xffffffff>, <&cpu4_intc 9>;
+			riscv,ndev = <53>;
 		};
 		prci: clock-controller@10000000 {
 			compatible = "sifive,fu540-c000-prci";
@@ -170,7 +171,8 @@
 			compatible = "sifive,fu540-c000-pdma";
 			reg = <0x0 0x3000000 0x0 0x8000>;
 			interrupt-parent = <&plic0>;
-			interrupts = <23 24 25 26 27 28 29 30>;
+			interrupts = <23>, <24>, <25>, <26>, <27>, <28>, <29>,
+				     <30>;
 			#dma-cells = <1>;
 		};
 		uart1: serial@10011000 {
@@ -195,8 +197,8 @@
 		};
 		qspi0: spi@10040000 {
 			compatible = "sifive,fu540-c000-spi", "sifive,spi0";
-			reg = <0x0 0x10040000 0x0 0x1000
-			       0x0 0x20000000 0x0 0x10000000>;
+			reg = <0x0 0x10040000 0x0 0x1000>,
+			      <0x0 0x20000000 0x0 0x10000000>;
 			interrupt-parent = <&plic0>;
 			interrupts = <51>;
 			clocks = <&prci PRCI_CLK_TLCLK>;
@@ -206,8 +208,8 @@
 		};
 		qspi1: spi@10041000 {
 			compatible = "sifive,fu540-c000-spi", "sifive,spi0";
-			reg = <0x0 0x10041000 0x0 0x1000
-			       0x0 0x30000000 0x0 0x10000000>;
+			reg = <0x0 0x10041000 0x0 0x1000>,
+			      <0x0 0x30000000 0x0 0x10000000>;
 			interrupt-parent = <&plic0>;
 			interrupts = <52>;
 			clocks = <&prci PRCI_CLK_TLCLK>;
@@ -229,8 +231,8 @@
 			compatible = "sifive,fu540-c000-gem";
 			interrupt-parent = <&plic0>;
 			interrupts = <53>;
-			reg = <0x0 0x10090000 0x0 0x2000
-			       0x0 0x100a0000 0x0 0x1000>;
+			reg = <0x0 0x10090000 0x0 0x2000>,
+			      <0x0 0x100a0000 0x0 0x1000>;
 			local-mac-address = [00 00 00 00 00 00];
 			clock-names = "pclk", "hclk";
 			clocks = <&prci PRCI_CLK_GEMGXLPLL>,
@@ -243,7 +245,7 @@
 			compatible = "sifive,fu540-c000-pwm", "sifive,pwm0";
 			reg = <0x0 0x10020000 0x0 0x1000>;
 			interrupt-parent = <&plic0>;
-			interrupts = <42 43 44 45>;
+			interrupts = <42>, <43>, <44>, <45>;
 			clocks = <&prci PRCI_CLK_TLCLK>;
 			#pwm-cells = <3>;
 			status = "disabled";
@@ -252,7 +254,7 @@
 			compatible = "sifive,fu540-c000-pwm", "sifive,pwm0";
 			reg = <0x0 0x10021000 0x0 0x1000>;
 			interrupt-parent = <&plic0>;
-			interrupts = <46 47 48 49>;
+			interrupts = <46>, <47>, <48>, <49>;
 			clocks = <&prci PRCI_CLK_TLCLK>;
 			#pwm-cells = <3>;
 			status = "disabled";
@@ -265,7 +267,7 @@
 			cache-size = <2097152>;
 			cache-unified;
 			interrupt-parent = <&plic0>;
-			interrupts = <1 2 3>;
+			interrupts = <1>, <2>, <3>;
 			reg = <0x0 0x2010000 0x0 0x1000>;
 		};
 		gpio: gpio@10060000 {
diff --git a/dts/src/riscv/sifive/fu740-c000.dtsi b/dts/src/riscv/sifive/fu740-c000.dtsi
index abbb960f90..8464b0e3c8 100644
--- a/dts/src/riscv/sifive/fu740-c000.dtsi
+++ b/dts/src/riscv/sifive/fu740-c000.dtsi
@@ -147,12 +147,12 @@
 			reg = <0x0 0xc000000 0x0 0x4000000>;
 			riscv,ndev = <69>;
 			interrupt-controller;
-			interrupts-extended = <
-				&cpu0_intc 0xffffffff
-				&cpu1_intc 0xffffffff &cpu1_intc 9
-				&cpu2_intc 0xffffffff &cpu2_intc 9
-				&cpu3_intc 0xffffffff &cpu3_intc 9
-				&cpu4_intc 0xffffffff &cpu4_intc 9>;
+			interrupts-extended =
+				<&cpu0_intc 0xffffffff>,
+				<&cpu1_intc 0xffffffff>, <&cpu1_intc 9>,
+				<&cpu2_intc 0xffffffff>, <&cpu2_intc 9>,
+				<&cpu3_intc 0xffffffff>, <&cpu3_intc 9>,
+				<&cpu4_intc 0xffffffff>, <&cpu4_intc 9>;
 		};
 		prci: clock-controller@10000000 {
 			compatible = "sifive,fu740-c000-prci";
@@ -273,7 +273,7 @@
 			cache-size = <2097152>;
 			cache-unified;
 			interrupt-parent = <&plic0>;
-			interrupts = <19 21 22 20>;
+			interrupts = <19>, <21>, <22>, <20>;
 			reg = <0x0 0x2010000 0x0 0x1000>;
 		};
 		gpio: gpio@10060000 {
diff --git a/dts/src/riscv/sifive/hifive-unmatched-a00.dts b/dts/src/riscv/sifive/hifive-unmatched-a00.dts
index 6bfa1f24d3..c4ed9efdff 100644
--- a/dts/src/riscv/sifive/hifive-unmatched-a00.dts
+++ b/dts/src/riscv/sifive/hifive-unmatched-a00.dts
@@ -39,6 +39,11 @@
 		clock-frequency = <RTCCLK_FREQ>;
 		clock-output-names = "rtcclk";
 	};
+
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+	};
 };
 
 &uart0 {
diff --git a/dts/src/riscv/starfive/jh7100-beaglev-starlight.dts b/dts/src/riscv/starfive/jh7100-beaglev-starlight.dts
new file mode 100644
index 0000000000..c9af67f7a0
--- /dev/null
+++ b/dts/src/riscv/starfive/jh7100-beaglev-starlight.dts
@@ -0,0 +1,164 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright (C) 2021 StarFive Technology Co., Ltd.
+ * Copyright (C) 2021 Emil Renner Berthing <kernel@esmil.dk>
+ */
+
+/dts-v1/;
+#include "jh7100.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/pinctrl-starfive.h>
+
+/ {
+	model = "BeagleV Starlight Beta";
+	compatible = "beagle,beaglev-starlight-jh7100-r0", "starfive,jh7100";
+
+	aliases {
+		serial0 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	cpus {
+		timebase-frequency = <6250000>;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x2 0x0>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-ack {
+			gpios = <&gpio 43 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_HEARTBEAT;
+			linux,default-trigger = "heartbeat";
+			label = "ack";
+		};
+	};
+};
+
+&gpio {
+	i2c0_pins: i2c0-0 {
+		i2c-pins {
+			pinmux = <GPIOMUX(62, GPO_LOW,
+				  GPO_I2C0_PAD_SCK_OEN,
+				  GPI_I2C0_PAD_SCK_IN)>,
+				 <GPIOMUX(61, GPO_LOW,
+				  GPO_I2C0_PAD_SDA_OEN,
+				  GPI_I2C0_PAD_SDA_IN)>;
+			bias-disable; /* external pull-up */
+			input-enable;
+			input-schmitt-enable;
+		};
+	};
+
+	i2c1_pins: i2c1-0 {
+		i2c-pins {
+			pinmux = <GPIOMUX(47, GPO_LOW,
+				  GPO_I2C1_PAD_SCK_OEN,
+				  GPI_I2C1_PAD_SCK_IN)>,
+				 <GPIOMUX(48, GPO_LOW,
+				  GPO_I2C1_PAD_SDA_OEN,
+				  GPI_I2C1_PAD_SDA_IN)>;
+			bias-pull-up;
+			input-enable;
+			input-schmitt-enable;
+		};
+	};
+
+	i2c2_pins: i2c2-0 {
+		i2c-pins {
+			pinmux = <GPIOMUX(60, GPO_LOW,
+				  GPO_I2C2_PAD_SCK_OEN,
+				  GPI_I2C2_PAD_SCK_IN)>,
+				 <GPIOMUX(59, GPO_LOW,
+				  GPO_I2C2_PAD_SDA_OEN,
+				  GPI_I2C2_PAD_SDA_IN)>;
+			bias-disable; /* external pull-up */
+			input-enable;
+			input-schmitt-enable;
+		};
+	};
+
+	uart3_pins: uart3-0 {
+		rx-pins {
+			pinmux = <GPIOMUX(13, GPO_LOW, GPO_DISABLE,
+				  GPI_UART3_PAD_SIN)>;
+			bias-pull-up;
+			drive-strength = <14>;
+			input-enable;
+			input-schmitt-enable;
+			slew-rate = <0>;
+		};
+		tx-pins {
+			pinmux = <GPIOMUX(14, GPO_UART3_PAD_SOUT,
+				  GPO_ENABLE, GPI_NONE)>;
+			bias-disable;
+			drive-strength = <35>;
+			input-disable;
+			input-schmitt-disable;
+			slew-rate = <0>;
+		};
+	};
+};
+
+&i2c0 {
+	clock-frequency = <100000>;
+	i2c-sda-hold-time-ns = <300>;
+	i2c-sda-falling-time-ns = <500>;
+	i2c-scl-falling-time-ns = <500>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	status = "okay";
+
+	pmic@5e {
+		compatible = "ti,tps65086";
+		reg = <0x5e>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		regulators {
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	i2c-sda-hold-time-ns = <300>;
+	i2c-sda-falling-time-ns = <100>;
+	i2c-scl-falling-time-ns = <100>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	i2c-sda-hold-time-ns = <300>;
+	i2c-sda-falling-time-ns = <500>;
+	i2c-scl-falling-time-ns = <500>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+	status = "okay";
+};
+
+&osc_sys {
+	clock-frequency = <25000000>;
+};
+
+&osc_aud {
+	clock-frequency = <27000000>;
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+	status = "okay";
+};
diff --git a/dts/src/riscv/starfive/jh7100.dtsi b/dts/src/riscv/starfive/jh7100.dtsi
new file mode 100644
index 0000000000..69f22f9aad
--- /dev/null
+++ b/dts/src/riscv/starfive/jh7100.dtsi
@@ -0,0 +1,230 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright (C) 2021 StarFive Technology Co., Ltd.
+ * Copyright (C) 2021 Emil Renner Berthing <kernel@esmil.dk>
+ */
+
+/dts-v1/;
+#include <dt-bindings/clock/starfive-jh7100.h>
+#include <dt-bindings/reset/starfive-jh7100.h>
+
+/ {
+	compatible = "starfive,jh7100";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "sifive,u74-mc", "riscv";
+			reg = <0>;
+			d-cache-block-size = <64>;
+			d-cache-sets = <64>;
+			d-cache-size = <32768>;
+			d-tlb-sets = <1>;
+			d-tlb-size = <32>;
+			device_type = "cpu";
+			i-cache-block-size = <64>;
+			i-cache-sets = <64>;
+			i-cache-size = <32768>;
+			i-tlb-sets = <1>;
+			i-tlb-size = <32>;
+			mmu-type = "riscv,sv39";
+			riscv,isa = "rv64imafdc";
+			tlb-split;
+
+			cpu0_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		cpu@1 {
+			compatible = "sifive,u74-mc", "riscv";
+			reg = <1>;
+			d-cache-block-size = <64>;
+			d-cache-sets = <64>;
+			d-cache-size = <32768>;
+			d-tlb-sets = <1>;
+			d-tlb-size = <32>;
+			device_type = "cpu";
+			i-cache-block-size = <64>;
+			i-cache-sets = <64>;
+			i-cache-size = <32768>;
+			i-tlb-sets = <1>;
+			i-tlb-size = <32>;
+			mmu-type = "riscv,sv39";
+			riscv,isa = "rv64imafdc";
+			tlb-split;
+
+			cpu1_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+	};
+
+	osc_sys: osc_sys {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	osc_aud: osc_aud {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	gmac_rmii_ref: gmac_rmii_ref {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* Should be overridden by the board when needed */
+		clock-frequency = <0>;
+	};
+
+	gmac_gr_mii_rxclk: gmac_gr_mii_rxclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* Should be overridden by the board when needed */
+		clock-frequency = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&plic>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		clint: clint@2000000 {
+			compatible = "starfive,jh7100-clint", "sifive,clint0";
+			reg = <0x0 0x2000000 0x0 0x10000>;
+			interrupts-extended = <&cpu0_intc 3 &cpu0_intc 7
+					       &cpu1_intc 3 &cpu1_intc 7>;
+		};
+
+		plic: interrupt-controller@c000000 {
+			compatible = "starfive,jh7100-plic", "sifive,plic-1.0.0";
+			reg = <0x0 0xc000000 0x0 0x4000000>;
+			interrupts-extended = <&cpu0_intc 11 &cpu0_intc 9
+					       &cpu1_intc 11 &cpu1_intc 9>;
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+			riscv,ndev = <127>;
+		};
+
+		clkgen: clock-controller@11800000 {
+			compatible = "starfive,jh7100-clkgen";
+			reg = <0x0 0x11800000 0x0 0x10000>;
+			clocks = <&osc_sys>, <&osc_aud>, <&gmac_rmii_ref>, <&gmac_gr_mii_rxclk>;
+			clock-names = "osc_sys", "osc_aud", "gmac_rmii_ref", "gmac_gr_mii_rxclk";
+			#clock-cells = <1>;
+		};
+
+		rstgen: reset-controller@11840000 {
+			compatible = "starfive,jh7100-reset";
+			reg = <0x0 0x11840000 0x0 0x10000>;
+			#reset-cells = <1>;
+		};
+
+		i2c0: i2c@118b0000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x0 0x118b0000 0x0 0x10000>;
+			clocks = <&clkgen JH7100_CLK_I2C0_CORE>,
+				 <&clkgen JH7100_CLK_I2C0_APB>;
+			clock-names = "ref", "pclk";
+			resets = <&rstgen JH7100_RSTN_I2C0_APB>;
+			interrupts = <96>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@118c0000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x0 0x118c0000 0x0 0x10000>;
+			clocks = <&clkgen JH7100_CLK_I2C1_CORE>,
+				 <&clkgen JH7100_CLK_I2C1_APB>;
+			clock-names = "ref", "pclk";
+			resets = <&rstgen JH7100_RSTN_I2C1_APB>;
+			interrupts = <97>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		gpio: pinctrl@11910000 {
+			compatible = "starfive,jh7100-pinctrl";
+			reg = <0x0 0x11910000 0x0 0x10000>,
+			      <0x0 0x11858000 0x0 0x1000>;
+			reg-names = "gpio", "padctl";
+			clocks = <&clkgen JH7100_CLK_GPIO_APB>;
+			resets = <&rstgen JH7100_RSTN_GPIO_APB>;
+			interrupts = <32>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		uart2: serial@12430000 {
+			compatible = "starfive,jh7100-uart", "snps,dw-apb-uart";
+			reg = <0x0 0x12430000 0x0 0x10000>;
+			clocks = <&clkgen JH7100_CLK_UART2_CORE>,
+				 <&clkgen JH7100_CLK_UART2_APB>;
+			clock-names = "baudclk", "apb_pclk";
+			resets = <&rstgen JH7100_RSTN_UART2_APB>;
+			interrupts = <72>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+			status = "disabled";
+		};
+
+		uart3: serial@12440000 {
+			compatible = "starfive,jh7100-uart", "snps,dw-apb-uart";
+			reg = <0x0 0x12440000 0x0 0x10000>;
+			clocks = <&clkgen JH7100_CLK_UART3_CORE>,
+				 <&clkgen JH7100_CLK_UART3_APB>;
+			clock-names = "baudclk", "apb_pclk";
+			resets = <&rstgen JH7100_RSTN_UART3_APB>;
+			interrupts = <73>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@12450000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x0 0x12450000 0x0 0x10000>;
+			clocks = <&clkgen JH7100_CLK_I2C2_CORE>,
+				 <&clkgen JH7100_CLK_I2C2_APB>;
+			clock-names = "ref", "pclk";
+			resets = <&rstgen JH7100_RSTN_I2C2_APB>;
+			interrupts = <74>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@12460000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x0 0x12460000 0x0 0x10000>;
+			clocks = <&clkgen JH7100_CLK_I2C3_CORE>,
+				 <&clkgen JH7100_CLK_I2C3_APB>;
+			clock-names = "ref", "pclk";
+			resets = <&rstgen JH7100_RSTN_I2C3_APB>;
+			interrupts = <75>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/dts/src/x86/falconfalls.dts b/dts/src/x86/falconfalls.dts
index 0ac3d43571..65fa3d8662 100644
--- a/dts/src/x86/falconfalls.dts
+++ b/dts/src/x86/falconfalls.dts
@@ -249,7 +249,7 @@
 
 						gpio@26 {
 							#gpio-cells = <2>;
-							compatible = "ti,pcf8575";
+							compatible = "nxp,pcf8575";
 							reg = <0x26>;
 							gpio-controller;
 						};
@@ -263,7 +263,7 @@
 
 						gpio@26 {
 							#gpio-cells = <2>;
-							compatible = "ti,pcf8575";
+							compatible = "nxp,pcf8575";
 							reg = <0x26>;
 							gpio-controller;
 						};
diff --git a/fs/devfs-core.c b/fs/devfs-core.c
index 2d016e0e48..38423e5d1e 100644
--- a/fs/devfs-core.c
+++ b/fs/devfs-core.c
@@ -37,7 +37,7 @@ int devfs_partition_complete(struct string_list *sl, char *instr)
 
 	len = strlen(instr);
 
-	list_for_each_entry(cdev, &cdev_list, list) {
+	for_each_cdev(cdev) {
 		if (cdev->master &&
 		    !strncmp(instr, cdev->name, len)) {
 			string_list_add_asprintf(sl, "%s ", cdev->name);
@@ -62,7 +62,7 @@ struct cdev *lcdev_by_name(const char *filename)
 {
 	struct cdev *cdev;
 
-	list_for_each_entry(cdev, &cdev_list, list) {
+	for_each_cdev(cdev) {
 		if (!strcmp(cdev->name, filename))
 			return cdev;
 	}
@@ -84,7 +84,7 @@ struct cdev *cdev_by_device_node(struct device_node *node)
 {
 	struct cdev *cdev;
 
-	list_for_each_entry(cdev, &cdev_list, list) {
+	for_each_cdev(cdev) {
 		if (!cdev->device_node)
 			continue;
 		if (cdev->device_node == node)
@@ -100,8 +100,22 @@ struct cdev *cdev_by_partuuid(const char *partuuid)
 	if (!partuuid)
 		return NULL;
 
-	list_for_each_entry(cdev, &cdev_list, list) {
-		if (!strcasecmp(cdev->partuuid, partuuid))
+	for_each_cdev(cdev) {
+		if (cdev->master && !strcasecmp(cdev->uuid, partuuid))
+			return cdev;
+	}
+	return NULL;
+}
+
+struct cdev *cdev_by_diskuuid(const char *diskuuid)
+{
+	struct cdev *cdev;
+
+	if (!diskuuid)
+		return NULL;
+
+	for_each_cdev(cdev) {
+		if (!cdev->master && !strcasecmp(cdev->uuid, diskuuid))
 			return cdev;
 	}
 	return NULL;
@@ -155,7 +169,15 @@ int cdev_find_free_index(const char *basename)
 	return -EBUSY;	/* all indexes are used */
 }
 
-struct cdev *cdev_open(const char *name, unsigned long flags)
+int cdev_open(struct cdev *cdev, unsigned long flags)
+{
+	if (cdev->ops->open)
+		return cdev->ops->open(cdev, flags);
+
+	return 0;
+}
+
+struct cdev *cdev_open_by_name(const char *name, unsigned long flags)
 {
 	struct cdev *cdev;
 	int ret;
@@ -164,11 +186,9 @@ struct cdev *cdev_open(const char *name, unsigned long flags)
 	if (!cdev)
 		return NULL;
 
-	if (cdev->ops->open) {
-		ret = cdev->ops->open(cdev, flags);
-		if (ret)
-			return NULL;
-	}
+	ret = cdev_open(cdev, flags);
+	if (ret)
+		return NULL;
 
 	return cdev;
 }
@@ -219,6 +239,67 @@ int cdev_erase(struct cdev *cdev, loff_t count, loff_t offset)
 	return cdev->ops->erase(cdev, count, cdev->offset + offset);
 }
 
+int cdev_lseek(struct cdev *cdev, loff_t pos)
+{
+	int ret;
+
+	if (cdev->ops->lseek) {
+		ret = cdev->ops->lseek(cdev, pos + cdev->offset);
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
+}
+
+int cdev_protect(struct cdev *cdev, size_t count, loff_t offset, int prot)
+{
+	if (!cdev->ops->protect)
+		return -ENOSYS;
+
+	return cdev->ops->protect(cdev, count, offset + cdev->offset, prot);
+}
+
+int cdev_discard_range(struct cdev *cdev, loff_t count, loff_t offset)
+{
+	if (!cdev->ops->discard_range)
+		return -ENOSYS;
+
+	if (cdev->flags & DEVFS_PARTITION_READONLY)
+		return -EPERM;
+
+	if (offset >= cdev->size)
+		return 0;
+
+	if (count + offset > cdev->size)
+		count = cdev->size - offset;
+
+	return cdev->ops->discard_range(cdev, count, offset + cdev->offset);
+}
+
+int cdev_memmap(struct cdev *cdev, void **map, int flags)
+{
+	int ret = -ENOSYS;
+
+	if (!cdev->ops->memmap)
+		return -EINVAL;
+
+	ret = cdev->ops->memmap(cdev, map, flags);
+
+	if (!ret)
+		*map = (void *)((unsigned long)*map + (unsigned long)cdev->offset);
+
+	return ret;
+}
+
+int cdev_truncate(struct cdev *cdev, size_t size)
+{
+	if (cdev->ops->truncate)
+		return cdev->ops->truncate(cdev, size);
+
+	return -EPERM;
+}
+
 int devfs_create(struct cdev *new)
 {
 	struct cdev *cdev;
diff --git a/fs/devfs.c b/fs/devfs.c
index df229cca48..deb244feea 100644
--- a/fs/devfs.c
+++ b/fs/devfs.c
@@ -35,8 +35,6 @@ struct devfs_inode {
 	struct cdev *cdev;
 };
 
-extern struct list_head cdev_list;
-
 static int devfs_read(struct device_d *_dev, FILE *f, void *buf, size_t size)
 {
 	struct cdev *cdev = f->priv;
@@ -57,15 +55,8 @@ static int devfs_write(struct device_d *_dev, FILE *f, const void *buf, size_t s
 static int devfs_lseek(struct device_d *_dev, FILE *f, loff_t pos)
 {
 	struct cdev *cdev = f->priv;
-	int ret;
-
-	if (cdev->ops->lseek) {
-		ret = cdev->ops->lseek(cdev, pos + cdev->offset);
-		if (ret < 0)
-			return ret;
-	}
 
-	return 0;
+	return cdev_lseek(cdev, pos);
 }
 
 static int devfs_erase(struct device_d *_dev, FILE *f, loff_t count, loff_t offset)
@@ -81,14 +72,11 @@ static int devfs_erase(struct device_d *_dev, FILE *f, loff_t count, loff_t offs
 	return cdev_erase(cdev, count, offset);
 }
 
-static int devfs_protect(struct device_d *_dev, FILE *f, size_t count, loff_t offset, int prot)
+static int devfs_protect(struct device_d *dev, FILE *f, size_t count, loff_t offset, int prot)
 {
 	struct cdev *cdev = f->priv;
 
-	if (!cdev->ops->protect)
-		return -ENOSYS;
-
-	return cdev->ops->protect(cdev, count, offset + cdev->offset, prot);
+	return cdev_protect(cdev, count, offset, prot);
 }
 
 static int devfs_discard_range(struct device_d *dev, FILE *f, loff_t count,
@@ -96,35 +84,14 @@ static int devfs_discard_range(struct device_d *dev, FILE *f, loff_t count,
 {
 	struct cdev *cdev = f->priv;
 
-	if (!cdev->ops->discard_range)
-		return -ENOSYS;
-
-	if (cdev->flags & DEVFS_PARTITION_READONLY)
-		return -EPERM;
-
-	if (offset >= cdev->size)
-		return 0;
-
-	if (count + offset > cdev->size)
-		count = cdev->size - offset;
-
-	return cdev->ops->discard_range(cdev, count, offset + cdev->offset);
+	return cdev_discard_range(cdev, count, offset);
 }
 
 static int devfs_memmap(struct device_d *_dev, FILE *f, void **map, int flags)
 {
 	struct cdev *cdev = f->priv;
-	int ret = -ENOSYS;
-
-	if (!cdev->ops->memmap)
-		return -EINVAL;
-
-	ret = cdev->ops->memmap(cdev, map, flags);
 
-	if (!ret)
-		*map = (void *)((unsigned long)*map + (unsigned long)cdev->offset);
-
-	return ret;
+	return cdev_memmap(cdev, map, flags);
 }
 
 static int devfs_open(struct device_d *_dev, FILE *f, const char *filename)
@@ -183,10 +150,7 @@ static int devfs_truncate(struct device_d *dev, FILE *f, loff_t size)
 {
 	struct cdev *cdev = f->priv;
 
-	if (cdev->ops->truncate)
-		return cdev->ops->truncate(cdev, size);
-
-	return -EPERM;
+	return cdev_truncate(cdev, size);
 }
 
 static struct inode *devfs_alloc_inode(struct super_block *sb)
@@ -213,7 +177,7 @@ static int devfs_iterate(struct file *file, struct dir_context *ctx)
 
 	dir_emit_dots(file, ctx);
 
-	list_for_each_entry(cdev, &cdev_list, list) {
+	for_each_cdev(cdev) {
 		dir_emit(ctx, cdev->name, strlen(cdev->name),
 				1 /* FIXME */, DT_REG);
 	}
diff --git a/fs/fs.c b/fs/fs.c
index 60fdb29078..5fb9f1402e 100644
--- a/fs/fs.c
+++ b/fs/fs.c
@@ -800,7 +800,7 @@ int fsdev_open_cdev(struct fs_device_d *fsdev)
 
 		fsdev->cdev = cdev_create_loop(fsdev->backingstore, O_RDWR, offset);
 	} else {
-		fsdev->cdev = cdev_open(fsdev->backingstore, O_RDWR);
+		fsdev->cdev = cdev_open_by_name(fsdev->backingstore, O_RDWR);
 	}
 	if (!fsdev->cdev) {
 		path_put(&path);
@@ -2999,8 +2999,8 @@ int mount(const char *device, const char *fsname, const char *pathname,
 		    cdev_is_mci_main_part_dev(fsdev->cdev->master))
 			str = get_linux_mmcblkdev(fsdev);
 
-		if (!str && fsdev->cdev->partuuid[0] != 0)
-			str = basprintf("root=PARTUUID=%s", fsdev->cdev->partuuid);
+		if (!str && fsdev->cdev->uuid[0] != 0)
+			str = basprintf("root=PARTUUID=%s", fsdev->cdev->uuid);
 
 		if (str)
 			fsdev_set_linux_rootarg(fsdev, str);
@@ -3048,7 +3048,7 @@ int umount(const char *pathname)
 	path_put(&path);
 
 	if (!fsdev) {
-		struct cdev *cdev = cdev_open(pathname, O_RDWR);
+		struct cdev *cdev = cdev_open_by_name(pathname, O_RDWR);
 
 		if (cdev) {
 			cdev_close(cdev);
@@ -3255,6 +3255,7 @@ static int do_lookup_dentry(int argc, char *argv[])
 
 BAREBOX_CMD_START(lookup_dentry)
         .cmd            = do_lookup_dentry,
+	BAREBOX_CMD_GROUP(CMD_GRP_MISC)
 BAREBOX_CMD_END
 
 static struct dentry *debug_follow_mount(struct dentry *dentry)
@@ -3309,5 +3310,6 @@ static int do_debug_fs_dump(int argc, char *argv[])
 
 BAREBOX_CMD_START(debug_fs_dump)
         .cmd            = do_debug_fs_dump,
+	BAREBOX_CMD_GROUP(CMD_GRP_MISC)
 BAREBOX_CMD_END
 #endif
diff --git a/fs/jffs2/fs.c b/fs/jffs2/fs.c
index f3f472d687..15bb63990b 100644
--- a/fs/jffs2/fs.c
+++ b/fs/jffs2/fs.c
@@ -72,6 +72,9 @@ static int jffs2_get_block(struct jffs2_file *jf, unsigned int pos)
 	struct jffs2_inode_info *f = JFFS2_INODE_INFO(jf->inode);
 	int ret;
 
+	/* pos always has to be 4096 bytes aligned here */
+	WARN_ON(pos % JFFS2_BLOCK_SIZE != 0);
+
 	if (pos != jf->offset) {
 		ret = jffs2_read_inode_range(c, f, jf->buf, pos,
 					     JFFS2_BLOCK_SIZE);
@@ -96,12 +99,13 @@ static int jffs2_read(struct device_d *_dev, FILE *f, void *buf,
 	/* Read till end of current block */
 	ofs = f->pos % JFFS2_BLOCK_SIZE;
 	if (ofs) {
-		ret = jffs2_get_block(jf, pos);
+		ret = jffs2_get_block(jf, f->pos - ofs); /* Align down block */
 		if (ret)
 			return ret;
 
 		now = min(size, JFFS2_BLOCK_SIZE - ofs);
 
+		/* Complete block has been read, re-apply ofset now */
 		memcpy(buf, jf->buf + ofs, now);
 		size -= now;
 		pos += now;
diff --git a/include/driver.h b/include/driver.h
index 1215a2d57a..a787f985a0 100644
--- a/include/driver.h
+++ b/include/driver.h
@@ -141,6 +141,10 @@ void device_detect_all(void);
  */
 int unregister_device(struct device_d *);
 
+void free_device_res(struct device_d *dev);
+void free_device(struct device_d *dev);
+
+
 /* Iterate over a devices children
  */
 #define device_for_each_child(dev, child) \
@@ -451,7 +455,7 @@ struct cdev_operations {
 	int (*truncate)(struct cdev*, size_t size);
 };
 
-#define MAX_PARTUUID_STR	sizeof("00112233-4455-6677-8899-AABBCCDDEEFF")
+#define MAX_UUID_STR	sizeof("00112233-4455-6677-8899-AABBCCDDEEFF")
 
 struct cdev {
 	const struct cdev_operations *ops;
@@ -464,7 +468,7 @@ struct cdev {
 	char *partname; /* the partition name, usually the above without the
 			 * device part, i.e. name = "nand0.barebox" -> partname = "barebox"
 			 */
-	char partuuid[MAX_PARTUUID_STR];
+	char uuid[MAX_UUID_STR];
 	loff_t offset;
 	loff_t size;
 	unsigned int flags;
@@ -488,18 +492,28 @@ struct cdev *lcdev_by_name(const char *filename);
 struct cdev *cdev_readlink(struct cdev *cdev);
 struct cdev *cdev_by_device_node(struct device_node *node);
 struct cdev *cdev_by_partuuid(const char *partuuid);
-struct cdev *cdev_open(const char *name, unsigned long flags);
+struct cdev *cdev_by_diskuuid(const char *partuuid);
+struct cdev *cdev_open_by_name(const char *name, unsigned long flags);
 struct cdev *cdev_create_loop(const char *path, ulong flags, loff_t offset);
 void cdev_remove_loop(struct cdev *cdev);
-int cdev_do_open(struct cdev *, unsigned long flags);
+int cdev_open(struct cdev *, unsigned long flags);
 void cdev_close(struct cdev *cdev);
 int cdev_flush(struct cdev *cdev);
 ssize_t cdev_read(struct cdev *cdev, void *buf, size_t count, loff_t offset, ulong flags);
 ssize_t cdev_write(struct cdev *cdev, const void *buf, size_t count, loff_t offset, ulong flags);
 int cdev_ioctl(struct cdev *cdev, int cmd, void *buf);
 int cdev_erase(struct cdev *cdev, loff_t count, loff_t offset);
+int cdev_lseek(struct cdev*, loff_t);
+int cdev_protect(struct cdev*, size_t count, loff_t offset, int prot);
+int cdev_discard_range(struct cdev*, loff_t count, loff_t offset);
+int cdev_memmap(struct cdev*, void **map, int flags);
+int cdev_truncate(struct cdev*, size_t size);
 loff_t cdev_unallocated_space(struct cdev *cdev);
 
+extern struct list_head cdev_list;
+#define for_each_cdev(c) \
+	list_for_each_entry(cdev, &cdev_list, list)
+
 #define DEVFS_PARTITION_FIXED		(1U << 0)
 #define DEVFS_PARTITION_READONLY	(1U << 1)
 #define DEVFS_IS_CHARACTER_DEV		(1U << 3)
diff --git a/lib/bootstrap/devfs.c b/lib/bootstrap/devfs.c
index 6d28b1cb4d..873c4b0170 100644
--- a/lib/bootstrap/devfs.c
+++ b/lib/bootstrap/devfs.c
@@ -32,7 +32,7 @@ static void *read_image_head(const char *name)
 	struct cdev *cdev;
 	int ret;
 
-	cdev = cdev_open(name, O_RDONLY);
+	cdev = cdev_open_by_name(name, O_RDONLY);
 	if (!cdev) {
 		bootstrap_err("failed to open partition\n");
 		goto free_header;
@@ -124,7 +124,7 @@ void* bootstrap_read_devfs(char *devname, bool use_bb, int offset,
 
 	to = xmalloc(size);
 
-	cdev = cdev_open(partname, O_RDONLY);
+	cdev = cdev_open_by_name(partname, O_RDONLY);
 	if (!cdev) {
 		bootstrap_err("%s: failed to open %s\n", devname, partname);
 		goto free_memory;
diff --git a/lib/kasan/test_kasan.c b/lib/kasan/test_kasan.c
index e472bb3499..d0ea915477 100644
--- a/lib/kasan/test_kasan.c
+++ b/lib/kasan/test_kasan.c
@@ -474,5 +474,6 @@ static int do_kasan_test(int argc, char *argv[])
 BAREBOX_CMD_START(kasan_tests)
         .cmd            = do_kasan_test,
         BAREBOX_CMD_DESC("Run KAsan tests")
+        BAREBOX_CMD_GROUP(CMD_GRP_MISC)
         BAREBOX_CMD_COMPLETE(empty_complete)
 BAREBOX_CMD_END
diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib
index d981d48a25..e3c1297352 100644
--- a/scripts/Makefile.lib
+++ b/scripts/Makefile.lib
@@ -203,8 +203,8 @@ ld_flags       = $(KBUILD_LDFLAGS) $(ldflags-y)
 dtc_cpp_flags  = -Wp,-MD,$(depfile).pre -nostdinc                        \
 		 -Wp,-MT,$(basename $(notdir $@)).o                      \
 		 -I$(srctree)/arch/$(SRCARCH)/dts/include		 \
-		 -I$(srctree)/dts/include                                \
 		 -I$(srctree)/include                                    \
+		 -I$(srctree)/dts/include                                \
 		 -I$(srctree)/dts/src/                                   \
 		 $(DTC_CPP_FLAGS_$(basetarget).dtb)                      \
 		 -undef -D__DTS__
diff --git a/scripts/bareboximd.c b/scripts/bareboximd.c
index a734399aa5..2d4750d7fb 100644
--- a/scripts/bareboximd.c
+++ b/scripts/bareboximd.c
@@ -55,6 +55,40 @@ static unsigned long simple_strtoul(const char *cp, char **endp, unsigned int ba
 	return strtoul(cp, endp, base);
 }
 
+static int imd_read_file(const char *filename, size_t *size, void **outbuf)
+{
+	void *buf;
+	int fd, ret;
+	size_t fsize;
+
+	fd = open(filename, O_RDONLY);
+	if (fd < 0) {
+		fprintf(stderr, "Cannot open %s: %s\n", filename, strerror(errno));
+		return -errno;
+	}
+
+	fsize = lseek(fd, 0, SEEK_END);
+	if (fsize == -1) {
+		fprintf(stderr, "Cannot get size %s: %s\n", filename, strerror(errno));
+		ret = -errno;
+		goto close;
+	}
+
+	buf = mmap(NULL, fsize, PROT_READ | PROT_WRITE, MAP_PRIVATE, fd, 0);
+	if (buf == MAP_FAILED) {
+		close(fd);
+		return read_file_2(filename, size, outbuf, 0x100000);
+	}
+
+	*outbuf = buf;
+	*size = fsize;
+
+	return 0;
+close:
+	close(fd);
+	return ret;
+}
+
 #include "../include/xfuncs.h"
 #include "../crypto/crc32.c"
 #include "../common/imd.c"
diff --git a/scripts/common.c b/scripts/common.c
index b780b09941..2be41615ea 100644
--- a/scripts/common.c
+++ b/scripts/common.c
@@ -17,7 +17,7 @@
 int read_file_2(const char *filename, size_t *size, void **outbuf, size_t max_size)
 {
 	off_t fsize;
-	ssize_t rsize;
+	ssize_t read_size, now;
 	int ret, fd;
 	void *buf;
 
@@ -37,8 +37,10 @@ int read_file_2(const char *filename, size_t *size, void **outbuf, size_t max_si
 		goto close;
 	}
 
-	if (fsize < max_size)
-		max_size = fsize;
+	if (max_size < fsize)
+		read_size = max_size;
+	else
+		read_size = fsize;
 
 	if (lseek(fd, 0, SEEK_SET) == -1) {
 		fprintf(stderr, "Cannot seek to start %s: %s\n", filename, strerror(errno));
@@ -46,35 +48,30 @@ int read_file_2(const char *filename, size_t *size, void **outbuf, size_t max_si
 		goto close;
 	}
 
-	buf = mmap(NULL, max_size, PROT_READ | PROT_WRITE, MAP_PRIVATE, fd, 0);
-	if (buf == MAP_FAILED ) {
-		buf = malloc(max_size);
-		if (!buf) {
-			fprintf(stderr, "Cannot allocate memory\n");
-			ret = -ENOMEM;
-			goto close;
-		}
-
-		*outbuf = buf;
+	buf = malloc(read_size);
+	if (!buf) {
+		fprintf(stderr, "Cannot allocate memory\n");
+		ret = -ENOMEM;
+		goto close;
+	}
 
-		while (*size < max_size) {
-			rsize = read(fd, buf, max_size - *size);
-			if (rsize == 0) {
-				ret = -EIO;
-				goto free;
-			}
+	*outbuf = buf;
 
-			if (rsize < 0) {
-				ret = -errno;
-				goto free;
-			}
+	while (read_size) {
+		now = read(fd, buf, read_size);
+		if (now == 0) {
+			ret = -EIO;
+			goto free;
+		}
 
-			buf += rsize;
-			*size += rsize;
+		if (now < 0) {
+			ret = -errno;
+			goto free;
 		}
-	} else {
-		*outbuf = buf;
-		*size = max_size;
+
+		buf += now;
+		*size += now;
+		read_size -= now;
 	}
 
 	ret = 0;