diff options
| -rw-r--r-- | drivers/clocksource/Kconfig | 4 | ||||
| -rw-r--r-- | drivers/clocksource/Makefile | 1 | ||||
| -rw-r--r-- | drivers/clocksource/timer-stm32.c | 122 |
3 files changed, 127 insertions, 0 deletions
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig index 9fae1f2d35..e1bff23320 100644 --- a/drivers/clocksource/Kconfig +++ b/drivers/clocksource/Kconfig @@ -120,4 +120,8 @@ config ARMV7M_SYSTICK help This option enables support for the ARMv7M system timer unit. +config CLKSRC_STM32 + bool "Clocksource for STM32 SoCs" + depends on OFDEVICE && (ARCH_STM32 || COMPILE_TEST) + endmenu diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile index a4a7b84fae..eceaa990d4 100644 --- a/drivers/clocksource/Makefile +++ b/drivers/clocksource/Makefile @@ -25,3 +25,4 @@ obj-$(CONFIG_CLOCKSOURCE_TI_32K) += timer-ti-32k.o obj-$(CONFIG_CLINT_TIMER) += timer-clint.o obj-$(CONFIG_RISCV_TIMER) += timer-riscv.o obj-$(CONFIG_ARMV7M_SYSTICK) += armv7m_systick.o +obj-$(CONFIG_CLKSRC_STM32) += timer-stm32.o diff --git a/drivers/clocksource/timer-stm32.c b/drivers/clocksource/timer-stm32.c new file mode 100644 index 0000000000..dec48fccf5 --- /dev/null +++ b/drivers/clocksource/timer-stm32.c @@ -0,0 +1,122 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2018, STMicroelectronics - All Rights Reserved + * Author(s): Patrice Chotard, <patrice.chotard@foss.st.com> for STMicroelectronics. + */ + +#include <common.h> +#include <linux/clk.h> +#include <clock.h> +#include <init.h> +#include <io.h> + +/* Timer control1 register */ +#define CR1_CEN BIT(0) +#define CR1_ARPE BIT(7) + +/* Event Generation Register register */ +#define EGR_UG BIT(0) + +/* Auto reload register for free running config */ +#define GPT_FREE_RUNNING 0xFFFFFFFF + +#define MHZ_1 1000000 + +struct stm32_timer_regs { + u32 cr1; + u32 cr2; + u32 smcr; + u32 dier; + u32 sr; + u32 egr; + u32 ccmr1; + u32 ccmr2; + u32 ccer; + u32 cnt; + u32 psc; + u32 arr; + u32 reserved; + u32 ccr1; + u32 ccr2; + u32 ccr3; + u32 ccr4; + u32 reserved1; + u32 dcr; + u32 dmar; + u32 tim2_5_or; +}; + +static struct stm32_timer_regs *timer_base; + +static u64 stm32_timer_read(void) +{ + return readl(&timer_base->cnt); +} + +/* A bit obvious isn't it? */ +static struct clocksource cs = { + .read = stm32_timer_read, + .mask = CLOCKSOURCE_MASK(32), + .shift = 0, + .priority = 100, +}; + +static int stm32_timer_probe(struct device_d *dev) +{ + struct resource *iores; + struct clk *clk; + u32 rate, psc; + int ret; + + iores = dev_request_mem_resource(dev, 0); + if (IS_ERR(iores)) + return PTR_ERR(iores); + + timer_base = IOMEM(iores->start); + + clk = clk_get(dev, NULL); + if (IS_ERR(clk)) + return PTR_ERR(clk); + + ret = clk_enable(clk); + if (ret) + return ret; + + /* Stop the timer */ + clrbits_le32(&timer_base->cr1, CR1_CEN); + + /* get timer clock */ + rate = clk_get_rate(clk); + + /* we set timer prescaler to obtain a 1MHz timer counter frequency */ + psc = (rate / MHZ_1) - 1; + writel(psc, &timer_base->psc); + + /* Configure timer for auto-reload */ + setbits_le32(&timer_base->cr1, CR1_ARPE); + + /* load value for auto reload */ + writel(GPT_FREE_RUNNING, &timer_base->arr); + + /* start timer */ + setbits_le32(&timer_base->cr1, CR1_CEN); + + /* Update generation */ + setbits_le32(&timer_base->egr, EGR_UG); + + cs.mult = clocksource_hz2mult(MHZ_1, cs.shift); + + return init_clock(&cs); +} + +static struct of_device_id stm32_timer_dt_ids[] = { + { .compatible = "st,stm32-timer" }, + { /* sentinel */ } +}; + +static struct driver_d stm32_timer_driver = { + .name = "stm32-timer", + .probe = stm32_timer_probe, + .of_compatible = stm32_timer_dt_ids, +}; +postcore_platform_driver(stm32_timer_driver); |