diff options
| -rw-r--r-- | dts/Bindings/i2c/i2c-rk3x.txt | 42 | ||||
| -rw-r--r-- | dts/Bindings/i2c/i2c-sunxi-p2wi.txt | 41 | ||||
| -rw-r--r-- | dts/src/arm/armada-375-db.dts | 2 | ||||
| -rw-r--r-- | dts/src/arm/armada-385-db.dts | 2 | ||||
| -rw-r--r-- | dts/src/arm/armada-xp-openblocks-ax3-4.dts | 2 | ||||
| -rw-r--r-- | dts/src/arm64/apm-mustang.dts | 4 | ||||
| -rw-r--r-- | dts/src/arm64/apm-storm.dtsi | 36 |
7 files changed, 127 insertions, 2 deletions
diff --git a/dts/Bindings/i2c/i2c-rk3x.txt b/dts/Bindings/i2c/i2c-rk3x.txt new file mode 100644 index 0000000000..dde6c22ce9 --- /dev/null +++ b/dts/Bindings/i2c/i2c-rk3x.txt @@ -0,0 +1,42 @@ +* Rockchip RK3xxx I2C controller + +This driver interfaces with the native I2C controller present in Rockchip +RK3xxx SoCs. + +Required properties : + + - reg : Offset and length of the register set for the device + - compatible : should be "rockchip,rk3066-i2c", "rockchip,rk3188-i2c" or + "rockchip,rk3288-i2c". + - interrupts : interrupt number + - clocks : parent clock + +Required on RK3066, RK3188 : + + - rockchip,grf : the phandle of the syscon node for the general register + file (GRF) + - on those SoCs an alias with the correct I2C bus ID (bit offset in the GRF) + is also required. + +Optional properties : + + - clock-frequency : SCL frequency to use (in Hz). If omitted, 100kHz is used. + +Example: + +aliases { + i2c0 = &i2c0; +} + +i2c0: i2c@2002d000 { + compatible = "rockchip,rk3188-i2c"; + reg = <0x2002d000 0x1000>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + + rockchip,grf = <&grf>; + + clock-names = "i2c"; + clocks = <&cru PCLK_I2C0>; +}; diff --git a/dts/Bindings/i2c/i2c-sunxi-p2wi.txt b/dts/Bindings/i2c/i2c-sunxi-p2wi.txt new file mode 100644 index 0000000000..6b765485af --- /dev/null +++ b/dts/Bindings/i2c/i2c-sunxi-p2wi.txt @@ -0,0 +1,41 @@ + +* Allwinner P2WI (Push/Pull 2 Wire Interface) controller + +Required properties : + + - reg : Offset and length of the register set for the device. + - compatible : Should one of the following: + - "allwinner,sun6i-a31-p2wi" + - interrupts : The interrupt line connected to the P2WI peripheral. + - clocks : The gate clk connected to the P2WI peripheral. + - resets : The reset line connected to the P2WI peripheral. + +Optional properties : + + - clock-frequency : Desired P2WI bus clock frequency in Hz. If not set the +default frequency is 100kHz + +A P2WI may contain one child node encoding a P2WI slave device. + +Slave device properties: + Required properties: + - reg : the I2C slave address used during the initialization + process to switch from I2C to P2WI mode + +Example: + + p2wi@01f03400 { + compatible = "allwinner,sun6i-a31-p2wi"; + reg = <0x01f03400 0x400>; + interrupts = <0 39 4>; + clocks = <&apb0_gates 3>; + clock-frequency = <6000000>; + resets = <&apb0_rst 3>; + + axp221: pmic@68 { + compatible = "x-powers,axp221"; + reg = <0x68>; + + /* ... */ + }; + }; diff --git a/dts/src/arm/armada-375-db.dts b/dts/src/arm/armada-375-db.dts index 772fec2d26..1e2919d43d 100644 --- a/dts/src/arm/armada-375-db.dts +++ b/dts/src/arm/armada-375-db.dts @@ -91,6 +91,8 @@ marvell,nand-keep-config; marvell,nand-enable-arbiter; nand-on-flash-bbt; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; partition@0 { label = "U-Boot"; diff --git a/dts/src/arm/armada-385-db.dts b/dts/src/arm/armada-385-db.dts index ff9637dd8d..5bae473182 100644 --- a/dts/src/arm/armada-385-db.dts +++ b/dts/src/arm/armada-385-db.dts @@ -98,6 +98,8 @@ marvell,nand-keep-config; marvell,nand-enable-arbiter; nand-on-flash-bbt; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; partition@0 { label = "U-Boot"; diff --git a/dts/src/arm/armada-xp-openblocks-ax3-4.dts b/dts/src/arm/armada-xp-openblocks-ax3-4.dts index e5c6a0492c..4e5a59ee15 100644 --- a/dts/src/arm/armada-xp-openblocks-ax3-4.dts +++ b/dts/src/arm/armada-xp-openblocks-ax3-4.dts @@ -25,7 +25,7 @@ memory { device_type = "memory"; - reg = <0 0x00000000 0 0xC0000000>; /* 3 GB */ + reg = <0 0x00000000 0 0x40000000>; /* 1 GB soldered on */ }; soc { diff --git a/dts/src/arm64/apm-mustang.dts b/dts/src/arm64/apm-mustang.dts index 1247ca1200..6541962f5d 100644 --- a/dts/src/arm64/apm-mustang.dts +++ b/dts/src/arm64/apm-mustang.dts @@ -24,3 +24,7 @@ reg = < 0x1 0x00000000 0x0 0x80000000 >; /* Updated by bootloader */ }; }; + +&serial0 { + status = "ok"; +}; diff --git a/dts/src/arm64/apm-storm.dtsi b/dts/src/arm64/apm-storm.dtsi index c5f0a47a13..40aa96ce13 100644 --- a/dts/src/arm64/apm-storm.dtsi +++ b/dts/src/arm64/apm-storm.dtsi @@ -273,8 +273,9 @@ }; serial0: serial@1c020000 { + status = "disabled"; device_type = "serial"; - compatible = "ns16550"; + compatible = "ns16550a"; reg = <0 0x1c020000 0x0 0x1000>; reg-shift = <2>; clock-frequency = <10000000>; /* Updated by bootloader */ @@ -282,6 +283,39 @@ interrupts = <0x0 0x4c 0x4>; }; + serial1: serial@1c021000 { + status = "disabled"; + device_type = "serial"; + compatible = "ns16550a"; + reg = <0 0x1c021000 0x0 0x1000>; + reg-shift = <2>; + clock-frequency = <10000000>; /* Updated by bootloader */ + interrupt-parent = <&gic>; + interrupts = <0x0 0x4d 0x4>; + }; + + serial2: serial@1c022000 { + status = "disabled"; + device_type = "serial"; + compatible = "ns16550a"; + reg = <0 0x1c022000 0x0 0x1000>; + reg-shift = <2>; + clock-frequency = <10000000>; /* Updated by bootloader */ + interrupt-parent = <&gic>; + interrupts = <0x0 0x4e 0x4>; + }; + + serial3: serial@1c023000 { + status = "disabled"; + device_type = "serial"; + compatible = "ns16550a"; + reg = <0 0x1c023000 0x0 0x1000>; + reg-shift = <2>; + clock-frequency = <10000000>; /* Updated by bootloader */ + interrupt-parent = <&gic>; + interrupts = <0x0 0x4f 0x4>; + }; + phy1: phy@1f21a000 { compatible = "apm,xgene-phy"; reg = <0x0 0x1f21a000 0x0 0x100>; |