summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--arch/arm/Kconfig6
-rw-r--r--arch/arm/cpu/Kconfig7
-rw-r--r--arch/arm/mach-at91/Kconfig7
-rw-r--r--arch/arm/mach-imx/Kconfig29
-rw-r--r--arch/arm/mach-mxs/Kconfig6
-rw-r--r--arch/arm/mach-netx/Kconfig1
-rw-r--r--arch/arm/mach-omap/Kconfig17
-rw-r--r--arch/arm/mach-samsung/Kconfig18
-rw-r--r--arch/blackfin/Kconfig2
-rw-r--r--arch/mips/Kconfig26
-rw-r--r--arch/nios2/Kconfig5
-rw-r--r--arch/openrisc/Kconfig2
-rw-r--r--arch/ppc/mach-mpc5xxx/Kconfig1
-rw-r--r--arch/ppc/mach-mpc85xx/Kconfig3
-rw-r--r--arch/x86/Kconfig15
-rw-r--r--arch/x86/boot/Kconfig2
-rw-r--r--arch/x86/mach-i386/Kconfig2
-rw-r--r--commands/Kconfig31
-rw-r--r--common/Kconfig16
-rw-r--r--crypto/Kconfig2
-rw-r--r--drivers/Kconfig2
-rw-r--r--drivers/ata/Kconfig2
-rw-r--r--drivers/dma/Kconfig2
-rw-r--r--drivers/eeprom/Kconfig6
-rw-r--r--drivers/gpio/Kconfig2
-rw-r--r--drivers/i2c/Kconfig2
-rw-r--r--drivers/input/Kconfig4
-rw-r--r--drivers/mci/Kconfig4
-rw-r--r--drivers/misc/Kconfig2
-rw-r--r--drivers/mtd/Kconfig2
-rw-r--r--drivers/mtd/devices/Kconfig8
-rw-r--r--drivers/mtd/nand/Kconfig8
-rw-r--r--drivers/mtd/ubi/Kconfig2
-rw-r--r--drivers/net/Kconfig2
-rw-r--r--drivers/net/phy/Kconfig2
-rw-r--r--drivers/nor/Kconfig6
-rw-r--r--drivers/serial/Kconfig4
-rw-r--r--drivers/spi/Kconfig2
-rw-r--r--drivers/usb/Kconfig2
-rw-r--r--drivers/usb/gadget/Kconfig2
-rw-r--r--drivers/video/Kconfig2
-rw-r--r--drivers/watchdog/Kconfig2
-rw-r--r--fs/Kconfig2
-rw-r--r--lib/Kconfig6
-rw-r--r--lib/gui/Kconfig2
-rw-r--r--net/Kconfig2
46 files changed, 138 insertions, 142 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 3afd88514f..01fe9dedf0 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -19,7 +19,7 @@ config ARM_LINUX
config HAVE_MACH_ARM_HEAD
bool
-menu "System Type "
+menu "System Type"
choice
prompt "ARM system type"
@@ -71,7 +71,7 @@ config ARCH_NOMADIK
select CPU_ARM926T
select CLOCKSOURCE_NOMADIK
help
- Support for the Nomadik platform by ST-Ericsson
+ Support for the Nomadik platform by ST-Ericsson
config ARCH_OMAP
bool "TI OMAP"
@@ -153,7 +153,7 @@ config THUMB2_BAREBOX
endmenu
-menu "Arm specific settings "
+menu "Arm specific settings"
config CMD_ARM_CPUINFO
bool "cpuinfo command"
diff --git a/arch/arm/cpu/Kconfig b/arch/arm/cpu/Kconfig
index d8a5fb1734..86bc174101 100644
--- a/arch/arm/cpu/Kconfig
+++ b/arch/arm/cpu/Kconfig
@@ -4,7 +4,7 @@ config CPU_32
bool
default y
-# Select CPU types depending on the architecture selected. This selects
+# Select CPU types depending on the architecture selected. This selects
# which CPUs we support in the kernel image, and the compiler instruction
# optimiser behaviour.
@@ -27,14 +27,13 @@ config CPU_ARM920T
Say Y if you want support for the ARM920T processor.
Otherwise, say N.
-
# ARM926T
config CPU_ARM926T
bool
select CPU_32v5
help
- This is a variant of the ARM920. It has slightly different
- instruction sequences for cache and TLB operations. Curiously,
+ This is a variant of the ARM920. It has slightly different
+ instruction sequences for cache and TLB operations. Curiously,
there is no documentation on it at the ARM corporate website.
Say Y if you want support for the ARM926T processor.
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 3de6061666..2750dd5f12 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -116,13 +116,12 @@ config SUPPORT_CALAO_MOB_TNY_MD2
if ARCH_AT91RM9200
choice
-
prompt "AT91RM9200 Board Type"
config MACH_AT91RM9200EK
bool "Atmel AT91RM9200-EK Evaluation Kit"
- help
select HAVE_AT91_DATAFLASH_CARD
+ help
Select this if you are using Atmel's AT91RM9200-EK Evaluation Kit.
<http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3507>
@@ -135,7 +134,6 @@ endif
if ARCH_AT91SAM9260
choice
-
prompt "AT91SAM9260 Board Type"
config MACH_AT91SAM9260EK
@@ -218,7 +216,6 @@ endif
if ARCH_AT91SAM9G20
choice
-
prompt "AT91SAM9G20 Board Type"
config MACH_AT91SAM9G20EK
@@ -390,7 +387,7 @@ config CALAO_MOB_TNY_MD2
depends on SUPPORT_CALAO_MOB_TNY_MD2
config CALAO_MB_QIL_A9260
- bool "MB-QIL A9260 Motherboard Board support"
+ bool "MB-QIL A9260 Motherboard Board support"
depends on MACH_QIL_A9260
endif
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 3f4b45210c..2d655709b8 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -197,7 +197,6 @@ endchoice
if ARCH_IMX1
choice
-
prompt "i.MX1 Board Type"
config MACH_SCB9328
@@ -216,7 +215,6 @@ endif
if ARCH_IMX21
choice
-
prompt "i.MX21 Board Type"
config MACH_IMX21ADS
@@ -236,7 +234,6 @@ endif
if ARCH_IMX25
choice
-
prompt "i.MX25 Board Type"
config MACH_EUKREA_CPUIMX25
@@ -270,7 +267,6 @@ endif
if ARCH_IMX27
choice
-
prompt "i.MX27 Board Type"
config MACH_EUKREA_CPUIMX27
@@ -329,7 +325,6 @@ endif
if ARCH_IMX31
choice
-
prompt "i.MX31 Board Type"
config MACH_PCM037
@@ -350,7 +345,6 @@ endif
if ARCH_IMX35
choice
-
prompt "i.MX35 Board Type"
config MACH_EUKREA_CPUIMX35
@@ -397,7 +391,6 @@ endif
if ARCH_IMX51
choice
-
prompt "i.MX51 Board Type"
config MACH_FREESCALE_MX51_PDK
@@ -442,7 +435,6 @@ endif
if ARCH_IMX53
choice
-
prompt "i.MX53 Board Type"
config MACH_FREESCALE_MX53_LOCO
@@ -471,6 +463,7 @@ config MACH_TX53
endchoice
if MACH_TX53
+
choice
prompt "TX53 board revision"
config TX53_REV_1011
@@ -478,6 +471,7 @@ config TX53_REV_1011
config TX53_REV_XX30
bool "8030 / 1030"
endchoice
+
endif
endif
@@ -485,7 +479,6 @@ endif
if ARCH_IMX6
choice
-
prompt "i.MX6 Board Type"
config MACH_MX6Q_ARM2
@@ -500,9 +493,10 @@ endif
# ----------------------------------------------------------
-menu "Board specific settings "
+menu "Board specific settings"
if MACH_PCM037
+
choice
prompt "SDRAM Bank0"
config PCM037_SDRAM_BANK0_128MB
@@ -520,9 +514,11 @@ config PCM037_SDRAM_BANK1_128MB
config PCM037_SDRAM_BANK1_256MB
bool "256MB"
endchoice
+
endif
if MACH_EUKREA_CPUIMX27
+
choice
prompt "SDRAM Size"
config EUKREA_CPUIMX27_SDRAM_128MB
@@ -530,6 +526,7 @@ config EUKREA_CPUIMX27_SDRAM_128MB
config EUKREA_CPUIMX27_SDRAM_256MB
bool "256 MB"
endchoice
+
choice
prompt "NOR Flash Size"
config EUKREA_CPUIMX27_NOR_32MB
@@ -537,6 +534,7 @@ config EUKREA_CPUIMX27_NOR_32MB
config EUKREA_CPUIMX27_NOR_64MB
bool "> 32 MB"
endchoice
+
choice
prompt "Quad UART Port"
depends on DRIVER_SERIAL_NS16550
@@ -549,8 +547,11 @@ config EUKREA_CPUIMX27_QUART3
config EUKREA_CPUIMX27_QUART4
bool "Q4"
endchoice
+
endif
+
if MACH_FREESCALE_MX25_3STACK
+
choice
prompt "SDRAM Type"
config FREESCALE_MX25_3STACK_SDRAM_64MB_DDR2
@@ -558,16 +559,18 @@ config FREESCALE_MX25_3STACK_SDRAM_64MB_DDR2
config FREESCALE_MX25_3STACK_SDRAM_128MB_MDDR
bool "128 MB (mDDR)"
endchoice
+
endif
+
endmenu
-menu "i.MX specific settings "
+menu "i.MX specific settings"
config IMX_IIM
tristate "IIM fusebox device"
depends on !ARCH_IMX21 && !ARCH_IMX21
help
- Device driver for the IC Identification Module (IIM) fusebox. Use the
+ Device driver for the IC Identification Module (IIM) fusebox. Use the
regular md/mw commands to program and read the fusebox.
Fuses are grouped in "rows", 8 bits per row. When using md/mw commands,
@@ -588,7 +591,7 @@ config IMX_IIM_FUSE_BLOW
Before being actually able to blow the fuses, you need to explicitely
enable it:
- imx_iim0.permanent_write_enable=1
+ imx_iim0.permanent_write_enable=1
endmenu
diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig
index ff295f144c..853d81a0c4 100644
--- a/arch/arm/mach-mxs/Kconfig
+++ b/arch/arm/mach-mxs/Kconfig
@@ -84,7 +84,7 @@ endchoice
endif
-menu "i.MX specific settings "
+menu "i.MX specific settings"
config MXS_OCOTP
tristate "OCOTP device"
@@ -105,7 +105,7 @@ config MXS_OCOTP_WRITABLE
Before being actually able to blow the bits, you need to explicitely
enable writing:
- ocotp0.permanent_write_enable=1
+ ocotp0.permanent_write_enable=1
config MXS_CMD_BCB
depends on NAND_MXS
@@ -117,7 +117,7 @@ config MXS_CMD_BCB
endmenu
-menu "Board specific settings "
+menu "Board specific settings"
if MACH_TX28
diff --git a/arch/arm/mach-netx/Kconfig b/arch/arm/mach-netx/Kconfig
index 8e83417285..b9e3457d66 100644
--- a/arch/arm/mach-netx/Kconfig
+++ b/arch/arm/mach-netx/Kconfig
@@ -40,7 +40,6 @@ config NETX_COOKIE
default 16 if MACH_NXHX
choice
-
prompt "Netx Board Type"
config MACH_NXDB500
diff --git a/arch/arm/mach-omap/Kconfig b/arch/arm/mach-omap/Kconfig
index 81f6127e0a..e4103e241f 100644
--- a/arch/arm/mach-omap/Kconfig
+++ b/arch/arm/mach-omap/Kconfig
@@ -12,7 +12,7 @@
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
@@ -59,7 +59,7 @@ config OMAP3_CLOCK_CONFIG
config OMAP_GPMC
prompt "Support for GPMC configuration"
bool
- depends on (ARCH_OMAP2 || ARCH_OMAP3 || ARCH_OMAP4)
+ depends on (ARCH_OMAP2 || ARCH_OMAP3 || ARCH_OMAP4)
default y
help
Enable this if you use Texas Instrument's General purpose Memory
@@ -115,14 +115,14 @@ config MACH_BEAGLE
select HAVE_NOSHELL
select HAVE_DEFAULT_ENVIRONMENT_NEW
depends on ARCH_OMAP3
- help
+ help
Say Y here if you are using Beagle Board
config MACH_OMAP3EVM
bool "Texas Instrument's OMAP3 EVM"
select HAVE_NOSHELL
depends on ARCH_OMAP3
- help
+ help
Say Y here if you are using OMAP3EVM
config MACH_PANDA
@@ -155,7 +155,7 @@ config MACH_PCAAL1
bool "Phytec phyCARD-A-L1"
select HAVE_NOSHELL
depends on ARCH_OMAP3
- help
+ help
Say Y here if you are using a phyCARD-A-L1 PCA-A-L1
config MACH_PCAAXL2
@@ -169,7 +169,8 @@ config MACH_PCAAXL2
endchoice
if MACH_OMAP3EVM
- choice
+
+choice
prompt "Select UART"
config OMAP3EVM_UART1
@@ -183,7 +184,9 @@ if MACH_OMAP3EVM
depends on MACH_OMAP3EVM
help
Say Y here if you would like to use UART3 as console.
- endchoice
+
+endchoice
+
endif
config MACH_OMAP_ADVANCED_MUX
diff --git a/arch/arm/mach-samsung/Kconfig b/arch/arm/mach-samsung/Kconfig
index 3a4d910001..80575cb984 100644
--- a/arch/arm/mach-samsung/Kconfig
+++ b/arch/arm/mach-samsung/Kconfig
@@ -13,12 +13,12 @@ config ARCH_TEXT_BASE
default 0x23e00000 if MACH_TINY210
config BOARDINFO
- default "Mini 2440" if MACH_MINI2440
- default "Mini 6410" if MACH_MINI6410
- default "Tiny 6410" if MACH_TINY6410
+ default "Mini 2440" if MACH_MINI2440
+ default "Mini 6410" if MACH_MINI6410
+ default "Tiny 6410" if MACH_TINY6410
default "Digi A9M2440" if MACH_A9M2440
default "Digi A9M2410" if MACH_A9M2410
- default "Tiny 210" if MACH_TINY210
+ default "Tiny 210" if MACH_TINY210
config ARCH_BAREBOX_MAX_BARE_INIT_SIZE
hex
@@ -35,7 +35,6 @@ config CPU_S3C2440
bool
choice
-
prompt "S3C24xx Board Type"
config MACH_A9M2410
@@ -71,7 +70,7 @@ config MACH_MINI2440
endchoice
-menu "Board specific settings "
+menu "Board specific settings"
choice
prompt "A9M2440 baseboard"
@@ -98,7 +97,6 @@ config CPU_S3C6410
bool
choice
-
prompt "S3C64xx Board Type"
config MACH_MINI6410
@@ -118,7 +116,7 @@ config MACH_TINY6410
endchoice
-menu "Board specific settings "
+menu "Board specific settings"
source arch/arm/boards/friendlyarm-tiny6410/Kconfig
@@ -135,7 +133,6 @@ config CPU_S5PV210
bool
choice
-
prompt "S5PCxx board type"
config MACH_TINY210
@@ -149,8 +146,7 @@ endchoice
endif
-
-menu "S3C Features "
+menu "S3C Features"
config S3C_LOWLEVEL_INIT
bool
diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index 1c58ba83b7..5d8a2e2a2c 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -29,7 +29,7 @@ config MACH_IPE337
endchoice
-choice
+choice
prompt "Select your board options"
depends on MACH_IPE337
default MACH_IPE337_V2
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 7a1eeac706..947edcf6f8 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -62,10 +62,11 @@ source arch/mips/mach-xburst/Kconfig
endmenu
#
-# Endianess selection. Sufficiently obscure so many users don't know what to
-# answer,so we try hard to limit the available choices. Also the use of a
+# Endianess selection. Sufficiently obscure so many users don't know what to
+# answer,so we try hard to limit the available choices. Also the use of a
# choice statement should be more obvious to the user.
#
+
choice
prompt "Endianess selection"
help
@@ -98,8 +99,8 @@ config CPU_MIPS32_R1
select CPU_SUPPORTS_32BIT_KERNEL
help
Choose this option to build a barebox for release 1 or later of the
- MIPS32 architecture. Most modern embedded systems with a 32-bit
- MIPS processor are based on a MIPS32 processor. If you know the
+ MIPS32 architecture. Most modern embedded systems with a 32-bit
+ MIPS processor are based on a MIPS32 processor. If you know the
specific type of processor in your system, choose those that one
otherwise CPU_MIPS32_R1 is a safe bet for any MIPS32 system.
Release 2 of the MIPS32 architecture is available since several
@@ -113,8 +114,8 @@ config CPU_MIPS32_R2
select CPU_SUPPORTS_32BIT_KERNEL
help
Choose this option to build a barebox for release 2 or later of the
- MIPS32 architecture. Most modern embedded systems with a 32-bit
- MIPS processor are based on a MIPS32 processor. If you know the
+ MIPS32 architecture. Most modern embedded systems with a 32-bit
+ MIPS processor are based on a MIPS32 processor. If you know the
specific type of processor in your system, choose those that one
otherwise CPU_MIPS32_R1 is a safe bet for any MIPS32 system.
@@ -125,8 +126,8 @@ config CPU_MIPS64_R1
select CPU_SUPPORTS_64BIT_KERNEL
help
Choose this option to build a barebox for release 1 or later of the
- MIPS64 architecture. Many modern embedded systems with a 64-bit
- MIPS processor are based on a MIPS64 processor. If you know the
+ MIPS64 architecture. Many modern embedded systems with a 64-bit
+ MIPS processor are based on a MIPS64 processor. If you know the
specific type of processor in your system, choose those that one
otherwise CPU_MIPS64_R1 is a safe bet for any MIPS64 system.
Release 2 of the MIPS64 architecture is available since several
@@ -141,14 +142,13 @@ config CPU_MIPS64_R2
select CPU_SUPPORTS_64BIT_KERNEL
help
Choose this option to build a barebox for release 2 or later of the
- MIPS64 architecture. Many modern embedded systems with a 64-bit
- MIPS processor are based on a MIPS64 processor. If you know the
+ MIPS64 architecture. Many modern embedded systems with a 64-bit
+ MIPS processor are based on a MIPS64 processor. If you know the
specific type of processor in your system, choose those that one
otherwise CPU_MIPS64_R1 is a safe bet for any MIPS64 system.
endchoice
-
config SYS_HAS_CPU_MIPS32_R1
bool
@@ -199,7 +199,7 @@ choice
help
You should only select this option if you have a workload that
actually benefits from 64-bit processing or if your machine has
- large memory. You will only be presented a single option in this
+ large memory. You will only be presented a single option in this
menu if your system does not support both 32-bit and 64-bit modes.
config 32BIT
@@ -216,7 +216,7 @@ config 64BIT
endchoice
-menu "MIPS specific settings "
+menu "MIPS specific settings"
config CMD_MIPS_CPUINFO
bool "cpuinfo command"
diff --git a/arch/nios2/Kconfig b/arch/nios2/Kconfig
index e1af0c007b..c49f6e9376 100644
--- a/arch/nios2/Kconfig
+++ b/arch/nios2/Kconfig
@@ -16,13 +16,12 @@ choice
prompt "Select your board"
config GENERIC
- bool "Generic "
+ bool "Generic"
select NIOS2
-
endchoice
-menu "Board configuration "
+menu "Board configuration"
config EARLY_PRINTF
default n
diff --git a/arch/openrisc/Kconfig b/arch/openrisc/Kconfig
index bcfd67f261..47ee3fe33a 100644
--- a/arch/openrisc/Kconfig
+++ b/arch/openrisc/Kconfig
@@ -16,7 +16,7 @@ choice
prompt "Select your board"
config GENERIC
- bool "Generic "
+ bool "Generic"
select OPENRISC
endchoice
diff --git a/arch/ppc/mach-mpc5xxx/Kconfig b/arch/ppc/mach-mpc5xxx/Kconfig
index db4f391784..db001d736f 100644
--- a/arch/ppc/mach-mpc5xxx/Kconfig
+++ b/arch/ppc/mach-mpc5xxx/Kconfig
@@ -50,4 +50,5 @@ config MACH_PHYCORE_MPC5200B_TINY_REV
old board you should set this option to 1
endmenu
+
endif
diff --git a/arch/ppc/mach-mpc85xx/Kconfig b/arch/ppc/mach-mpc85xx/Kconfig
index b2af05ec59..8cde1bd7c8 100644
--- a/arch/ppc/mach-mpc85xx/Kconfig
+++ b/arch/ppc/mach-mpc85xx/Kconfig
@@ -17,9 +17,10 @@ choice
config P2020RDB
bool "P2020RDB"
help
- Say Y here if you are using the Freescale P2020RDB
+ Say Y here if you are using the Freescale P2020RDB
endchoice
+
endif
if P2020RDB
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 711bbfe0e5..777604fafe 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -40,19 +40,18 @@ choice
prompt "Bring up type"
config X86_BIOS_BRINGUP
- prompt "16 bit BIOS"
- bool
+ bool "16 bit BIOS"
help
- Barebox will act as a BIOS based bootloader. This includes
- some 16 bit real mode code and some restrictions everyone knows
- from BIOS based systems.
+ Barebox will act as a BIOS based bootloader. This includes
+ some 16 bit real mode code and some restrictions everyone knows
+ from BIOS based systems.
config X86_NATIVE_BRINGUP
bool "native"
help
- Barebox will act as a native bootloader. This includes all the
- required initialization needed to bring up a piece of hardware.
- Note: Not implemented yet
+ Barebox will act as a native bootloader. This includes all the
+ required initialization needed to bring up a piece of hardware.
+ Note: Not implemented yet
endchoice
diff --git a/arch/x86/boot/Kconfig b/arch/x86/boot/Kconfig
index cdb82e46d9..8dba00d591 100644
--- a/arch/x86/boot/Kconfig
+++ b/arch/x86/boot/Kconfig
@@ -1,6 +1,6 @@
if X86_BIOS_BRINGUP
-menu "BIOS boot source "
+menu "BIOS boot source"
config X86_HDBOOT
bool "HD boot"
diff --git a/arch/x86/mach-i386/Kconfig b/arch/x86/mach-i386/Kconfig
index 11f6aa679a..cb12b9c026 100644
--- a/arch/x86/mach-i386/Kconfig
+++ b/arch/x86/mach-i386/Kconfig
@@ -1,5 +1,5 @@
-menu "Board specific settings "
+menu "Board specific settings"
if X86_BOOTLOADER
diff --git a/commands/Kconfig b/commands/Kconfig
index ac9b797f2e..75ebfb8e5d 100644
--- a/commands/Kconfig
+++ b/commands/Kconfig
@@ -12,9 +12,9 @@ config HAS_POWEROFF
if COMMAND_SUPPORT
-menu "commands "
+menu "commands"
-menu "scripting "
+menu "scripting"
config CMD_EDIT
tristate
@@ -107,7 +107,7 @@ endif
config CMD_TIME
bool "time"
- help
+ help
Just like the unix time command this command allows to measure the
execution time of a command. Note: barebox does not use interrupts,
so the system timer can overrun during the execution of the command
@@ -130,7 +130,7 @@ config CMD_GLOBAL
endmenu
-menu "file commands "
+menu "file commands"
config CMD_LS
tristate
@@ -237,7 +237,7 @@ config CMD_FILETYPE
endmenu
-menu "console "
+menu "console"
config CMD_CLEAR
tristate
@@ -257,7 +257,7 @@ config CMD_ECHO_E
endmenu
-menu "memory "
+menu "memory"
config CMD_LOADB
select CRC16
@@ -306,8 +306,8 @@ config CMD_CRC_CMP
prompt "compare 2 files crc"
config CMD_DIGEST
- tristate
- select DIGEST
+ tristate
+ select DIGEST
config CMD_MD5SUM
tristate
@@ -335,7 +335,7 @@ config CMD_SHA224SUM
endmenu
-menu "flash "
+menu "flash"
config CMD_FLASH
tristate
@@ -349,8 +349,7 @@ config CMD_UBI
endmenu
-
-menu "booting "
+menu "booting"
config CMD_BOOTM
tristate
@@ -424,8 +423,8 @@ config CMD_BOOTU
depends on ARM
prompt "bootu"
help
- compile in the 'bootu' command to start raw (uncompressed)
- Linux images
+ compile in the 'bootu' command to start raw (uncompressed)
+ Linux images
config FLEXIBLE_BOOTARGS
bool
@@ -479,7 +478,7 @@ config CMD_OFTREE_PROBE
endmenu
-menu "testing "
+menu "testing"
config CMD_NANDTEST
tristate
@@ -500,7 +499,7 @@ config CMD_MTEST_ALTERNATIVE
endmenu
-menu "video command "
+menu "video command"
if VIDEO
@@ -659,7 +658,7 @@ config CMD_CLK
menuconfig CMD_WD
bool
depends on WATCHDOG
- prompt "wd command "
+ prompt "wd command"
help
The 'wd' command which allows to start, stop and trigger the onboard
watchdog.
diff --git a/common/Kconfig b/common/Kconfig
index d60db80747..42094048a2 100644
--- a/common/Kconfig
+++ b/common/Kconfig
@@ -61,7 +61,7 @@ config STDDEV
config BAREBOX_UPDATE
bool
-menu "General Settings "
+menu "General Settings"
config LOCALVERSION
string "Local version - append to the version string"
@@ -69,7 +69,7 @@ config LOCALVERSION
Append an extra string to the end of your version string.
The string you set here will be appended after the contents of
any files with a filename matching localversion* in your
- object and source tree, in that order. Your total string can
+ object and source tree, in that order. Your total string can
be a maximum of 64 characters.
config LOCALVERSION_AUTO
@@ -81,7 +81,7 @@ config LOCALVERSION_AUTO
top of tree revision.
A string of the format -gxxxxxxxx will be added to the localversion
- if a git-based tree is found. The string generated by this will be
+ if a git-based tree is found. The string generated by this will be
appended after any matching localversion* files, and after the value
set in CONFIG_LOCALVERSION.
@@ -106,7 +106,7 @@ config MEMINFO
config ENVIRONMENT_VARIABLES
bool "environment variables support"
-menu "memory layout "
+menu "memory layout"
config HAVE_PBL_IMAGE
bool
@@ -196,7 +196,7 @@ config MEMORY_LAYOUT_DEFAULT
bool "use default memory layout"
help
select this option to use bareboxs standard memory layout:
-
+
stack
-----
malloc heap
@@ -409,8 +409,8 @@ config MENU
prompt "Menu Framework"
depends on PROCESS_ESCAPE_SEQUENCE
help
- a menu framework that allow us to create list menu to simplify
- barebox and make it more user-frendly
+ a menu framework that allow us to create list menu to simplify
+ barebox and make it more user-frendly
config PASSWORD
bool
@@ -635,7 +635,7 @@ config RESET_SOURCE
endmenu
-menu "Debugging "
+menu "Debugging"
config DEBUG_INFO
bool
diff --git a/crypto/Kconfig b/crypto/Kconfig
index a6fc1b8f86..4bd8dcf359 100644
--- a/crypto/Kconfig
+++ b/crypto/Kconfig
@@ -8,7 +8,7 @@ config CRC7
bool
menuconfig DIGEST
- bool "Digest "
+ bool "Digest"
if DIGEST
diff --git a/drivers/Kconfig b/drivers/Kconfig
index f6446e8413..988ec9ee06 100644
--- a/drivers/Kconfig
+++ b/drivers/Kconfig
@@ -1,4 +1,4 @@
-menu "Drivers "
+menu "Drivers"
source "drivers/serial/Kconfig"
source "drivers/net/Kconfig"
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index fe6f5e6f5d..2e80c3ef5c 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -2,7 +2,7 @@ menuconfig DISK
select BLOCK
select PARTITION
select PARTITION_DISK
- bool "Disk support "
+ bool "Disk support"
help
Add support for disk like drives like harddisks, CDROMs, SD cards and
CF cards.
diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index ec6c894771..a30fa375d1 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -4,5 +4,5 @@ config MXS_APBH_DMA
tristate "MXS APBH DMA ENGINE"
depends on ARCH_IMX23 || ARCH_IMX28
help
- Experimental!
+ Experimental!
endmenu
diff --git a/drivers/eeprom/Kconfig b/drivers/eeprom/Kconfig
index ce9cfe7ec8..0e36c824ec 100644
--- a/drivers/eeprom/Kconfig
+++ b/drivers/eeprom/Kconfig
@@ -14,11 +14,11 @@ config EEPROM_AT24
help
Enable this driver to get read/write support to most I2C EEPROMs,
after you configure the driver to know about each EEPROM on
- your target board. Use these generic chip names, instead of
+ your target board. Use these generic chip names, instead of
vendor-specific ones like at24c64 or 24lc02:
- 24c00, 24c01, 24c02, spd (readonly 24c02), 24c04, 24c08,
- 24c16, 24c32, 24c64, 24c128, 24c256, 24c512, 24c1024
+ 24c00, 24c01, 24c02, spd (readonly 24c02), 24c04, 24c08,
+ 24c16, 24c32, 24c64, 24c128, 24c256, 24c512, 24c1024
Unless you like data loss puzzles, always be sure that any chip
you configure as a 24c32 (32 kbit) or larger is NOT really a
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index e8eeb6d4c3..89be6843ae 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -4,7 +4,7 @@ config GPIOLIB
if GPIOLIB
-menu "GPIO "
+menu "GPIO"
config GPIO_BCM2835
bool "GPIO support for BCM2835"
diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
index 038e2ee454..0c6aec39c9 100644
--- a/drivers/i2c/Kconfig
+++ b/drivers/i2c/Kconfig
@@ -1,5 +1,5 @@
menuconfig I2C
- bool "I2C drivers "
+ bool "I2C drivers"
if I2C
diff --git a/drivers/input/Kconfig b/drivers/input/Kconfig
index 846483c794..a6f1f47f8d 100644
--- a/drivers/input/Kconfig
+++ b/drivers/input/Kconfig
@@ -13,7 +13,7 @@ config KEYBOARD_GPIO
to GPIO pins of various CPUs (and some other chips).
Say Y here if your device has buttons connected
- directly to such GPIO pins. Your board-specific
+ directly to such GPIO pins. Your board-specific
setup logic must also provide a platform device,
with configuration data saying which GPIOs are used.
@@ -26,7 +26,7 @@ config KEYBOARD_IMX_KEYPAD
to the IMX keypad matrix.
Say Y here if your device has buttons connected
- to the IMX keypad matrix. Your board-specific
+ to the IMX keypad matrix. Your board-specific
setup logic must also provide a 'matrix_keymap_data' structure,
defining the used keys.
diff --git a/drivers/mci/Kconfig b/drivers/mci/Kconfig
index 5c0ca4dfa0..68761173c9 100644
--- a/drivers/mci/Kconfig
+++ b/drivers/mci/Kconfig
@@ -1,5 +1,5 @@
menuconfig MCI
- bool "MCI drivers "
+ bool "MCI drivers"
select DISK
help
Add support for MCI drivers, used to handle MMC and SD cards
@@ -92,7 +92,7 @@ config MCI_SPI
depends on SPI
help
Some systems access MMC/SD/SDIO cards using a SPI controller
- instead of using a "native" MMC/SD/SDIO controller. This has a
+ instead of using a "native" MMC/SD/SDIO controller. This has a
disadvantage of being relatively high overhead, but a compensating
advantage of working on many systems without dedicated MMC/SD/SDIO
controllers.
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 699046b0de..606490b54e 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -3,7 +3,7 @@
#
menuconfig MISC_DEVICES
- bool "Misc devices "
+ bool "Misc devices"
help
Add support for misc strange devices
diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig
index 0a4ca31bda..9450f5de8b 100644
--- a/drivers/mtd/Kconfig
+++ b/drivers/mtd/Kconfig
@@ -1,5 +1,5 @@
menuconfig MTD
- bool "Memory Technology Device (MTD) support"
+ bool "Memory Technology Device (MTD) support"
if MTD
diff --git a/drivers/mtd/devices/Kconfig b/drivers/mtd/devices/Kconfig
index 679ea80b73..61278a235d 100644
--- a/drivers/mtd/devices/Kconfig
+++ b/drivers/mtd/devices/Kconfig
@@ -15,7 +15,7 @@ config MTD_DATAFLASH_WRITE_VERIFY
help
This adds an extra check when data is written to the flash.
It may help if you are verifying chip setup (timings etc) on
- your board. There is a rare possibility that even though the
+ your board. There is a rare possibility that even though the
device thinks the write was successful, a bit could have been
flipped accidentally due to device wear or something else.
@@ -24,9 +24,9 @@ config MTD_M25P80
depends on SPI
help
This enables access to most modern SPI flash chips, used for
- program and data storage. Series supported include Atmel AT26DF,
- Spansion S25SL, SST 25VF, ST M25P, and Winbond W25X. Other chips
- are supported as well. See the driver source for the current list,
+ program and data storage. Series supported include Atmel AT26DF,
+ Spansion S25SL, SST 25VF, ST M25P, and Winbond W25X. Other chips
+ are supported as well. See the driver source for the current list,
or to add other chips.
Note that the original DataFlash chips (AT45 series, not AT26DF),
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index d96ef9e813..aa3ea34aa1 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -1,5 +1,5 @@
menuconfig NAND
- bool "NAND support "
+ bool "NAND support"
select MTD_NAND_IDS
help
This enables support for accessing all type of NAND flash
@@ -63,8 +63,8 @@ config NAND_OMAP_GPMC
tristate "NAND Flash Support for GPMC based OMAP platforms"
depends on OMAP_GPMC
help
- Support for NAND flash using GPMC. GPMC is a common memory
- interface found on Texas Instrument's OMAP platforms
+ Support for NAND flash using GPMC. GPMC is a common memory
+ interface found on Texas Instrument's OMAP platforms
config NAND_ATMEL
bool
@@ -77,7 +77,7 @@ config NAND_ATMEL_PMECC
depends on NAND_ATMEL
select NAND_ECC_HW
help
- Support for PMECC present on the SoC sam9x5 and sam9n12
+ Support for PMECC present on the SoC sam9x5 and sam9n12
config NAND_S3C24XX
bool
diff --git a/drivers/mtd/ubi/Kconfig b/drivers/mtd/ubi/Kconfig
index 2cf474ab59..6df954cbe8 100644
--- a/drivers/mtd/ubi/Kconfig
+++ b/drivers/mtd/ubi/Kconfig
@@ -1,5 +1,5 @@
config UBI
- bool "UBI support "
+ bool "UBI support"
select PARTITION_NEED_MTD
select CRC32
help
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index b3e5a83dc1..43d5984e0e 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -22,7 +22,7 @@ config ARCH_HAS_FEC_IMX
config PHYLIB
bool
-menu "Network drivers "
+menu "Network drivers"
depends on NET
source "drivers/net/phy/Kconfig"
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index 616b539887..9250305bf4 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -2,7 +2,7 @@
# PHY Layer Configuration
#
-menu "phylib "
+menu "phylib"
if PHYLIB
diff --git a/drivers/nor/Kconfig b/drivers/nor/Kconfig
index a3c0223164..c8ce24ff03 100644
--- a/drivers/nor/Kconfig
+++ b/drivers/nor/Kconfig
@@ -1,7 +1,7 @@
-menu "flash drivers "
+menu "flash drivers"
menuconfig DRIVER_CFI
- bool "CFI "
+ bool "CFI"
help
If you have NOR Flash devices connected to your system and wish
to use them say yes here.
@@ -19,7 +19,7 @@ config DRIVER_CFI_AMD
bool "support AMD flash chips"
config DRIVER_CFI_BANK_WIDTH_1
- bool "Support 8-bit buswidth"
+ bool "Support 8-bit buswidth"
depends on DRIVER_CFI
default y
help
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 32b033fbec..a8be9cdc8d 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -1,4 +1,4 @@
-menu "serial drivers "
+menu "serial drivers"
config DRIVER_SERIAL_ARM_DCC
depends on ARM
@@ -8,7 +8,7 @@ config SERIAL_AMBA_PL011
bool "ARM AMBA PL011 serial port support"
depends on ARM_AMBA
help
- This selects the ARM(R) AMBA(R) PrimeCell PL011 UART. If you have
+ This selects the ARM(R) AMBA(R) PrimeCell PL011 UART. If you have
an Integrator/PP2, Integrator/CP or Versatile platform, say Y here.
If unsure, say N.
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index b00329096d..10b8fea7bd 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -1,4 +1,4 @@
-menu "SPI drivers "
+menu "SPI drivers"
config SPI
bool "Enable SPI driver support"
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index 254b196415..acdb4c6ad3 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -1,5 +1,5 @@
menuconfig USB
- bool "USB support "
+ bool "USB support"
if USB
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 465121c337..6501d42873 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -1,6 +1,6 @@
menuconfig USB_GADGET
depends on USB_HAVE_GADGET_DRIVER
- bool "USB gadget support "
+ bool "USB gadget support"
config USB_HAVE_GADGET_DRIVER
bool
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 4aa92c5993..f09ffdfe28 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -1,5 +1,5 @@
menuconfig VIDEO
- bool "Video drivers "
+ bool "Video drivers"
help
Add support for framebuffer and splash screens
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index ba33617d22..2e2900c10f 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -3,7 +3,7 @@ config WATCHDOG_IMX_RESET_SOURCE
bool
menuconfig WATCHDOG
- bool "Watchdog support "
+ bool "Watchdog support"
help
Many platforms support a watchdog to keep track of a working machine.
This framework provides routines to handle these watchdogs.
diff --git a/fs/Kconfig b/fs/Kconfig
index 0ab69d75fc..c26c3c4290 100644
--- a/fs/Kconfig
+++ b/fs/Kconfig
@@ -1,5 +1,5 @@
-menu "Filesystem support "
+menu "Filesystem support"
config FS
bool
diff --git a/lib/Kconfig b/lib/Kconfig
index 13ecab0fd6..596638694b 100644
--- a/lib/Kconfig
+++ b/lib/Kconfig
@@ -1,4 +1,4 @@
-menu "Library routines "
+menu "Library routines"
config PARAMETER
bool
@@ -30,10 +30,10 @@ config OFTREE
bool
config BCH
- bool
+ bool
config BITREV
- bool
+ bool
config QSORT
bool
diff --git a/lib/gui/Kconfig b/lib/gui/Kconfig
index 8fd12fb60d..da71bae096 100644
--- a/lib/gui/Kconfig
+++ b/lib/gui/Kconfig
@@ -1,4 +1,4 @@
-menu "Library gui routines "
+menu "Library gui routines"
config IMAGE_RENDERER
bool
diff --git a/net/Kconfig b/net/Kconfig
index 00fffb3e8f..acd92ffe20 100644
--- a/net/Kconfig
+++ b/net/Kconfig
@@ -1,5 +1,5 @@
menuconfig NET
- bool "Networking Support "
+ bool "Networking Support"
if NET