summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--dts/Bindings/dma/rcar-audmapp.txt6
-rw-r--r--dts/Bindings/input/atmel,maxtouch.txt11
-rw-r--r--dts/Bindings/mfd/tc3589x.txt107
-rw-r--r--dts/Bindings/mtd/gpmc-nand.txt2
-rw-r--r--dts/Bindings/net/stmmac.txt4
-rw-r--r--dts/Bindings/pinctrl/qcom,apq8064-pinctrl.txt2
-rw-r--r--dts/Bindings/regulator/tps65090.txt4
-rw-r--r--dts/Bindings/sound/adi,axi-spdif-tx.txt2
-rw-r--r--dts/Bindings/usb/mxs-phy.txt1
-rw-r--r--dts/Bindings/video/analog-tv-connector.txt4
-rw-r--r--dts/src/arm/am4372.dtsi4
-rw-r--r--dts/src/arm/am437x-gp-evm.dts6
-rw-r--r--dts/src/arm/am43x-epos-evm.dts9
-rw-r--r--dts/src/arm/at91rm9200.dtsi2
-rw-r--r--dts/src/arm/at91sam9g20.dtsi1
-rw-r--r--dts/src/arm/dra7-evm.dts47
-rw-r--r--dts/src/arm/dra7.dtsi16
-rw-r--r--dts/src/arm/imx53-qsrb.dts8
-rw-r--r--dts/src/arm/imx6dl-hummingboard.dts4
-rw-r--r--dts/src/arm/imx6qdl-cubox-i.dtsi19
-rw-r--r--dts/src/arm/imx6qdl-microsom-ar8035.dtsi2
-rw-r--r--dts/src/arm/omap3-beagle.dts1
-rw-r--r--dts/src/arm/omap3-n900.dts4
-rw-r--r--dts/src/arm/omap3430-sdp.dts2
-rw-r--r--dts/src/arm/omap3xxx-clocks.dtsi1
-rw-r--r--dts/src/arm/omap54xx-clocks.dtsi16
-rw-r--r--dts/src/arm/ste-snowball.dts1
-rw-r--r--dts/src/arm/twl6030.dtsi4
-rw-r--r--dts/src/xtensa/kc705.dts5
29 files changed, 232 insertions, 63 deletions
diff --git a/dts/Bindings/dma/rcar-audmapp.txt b/dts/Bindings/dma/rcar-audmapp.txt
index 9f1d750..61bca50 100644
--- a/dts/Bindings/dma/rcar-audmapp.txt
+++ b/dts/Bindings/dma/rcar-audmapp.txt
@@ -16,9 +16,9 @@ Example:
* DMA client
Required properties:
-- dmas: a list of <[DMA multiplexer phandle] [SRS/DRS value]> pairs,
- where SRS/DRS values are fixed handles, specified in the SoC
- manual as the value that would be written into the PDMACHCR.
+- dmas: a list of <[DMA multiplexer phandle] [SRS << 8 | DRS]> pairs.
+ where SRS/DRS are specified in the SoC manual.
+ It will be written into PDMACHCR as high 16-bit parts.
- dma-names: a list of DMA channel names, one per "dmas" entry
Example:
diff --git a/dts/Bindings/input/atmel,maxtouch.txt b/dts/Bindings/input/atmel,maxtouch.txt
index baef432..0ac23f2 100644
--- a/dts/Bindings/input/atmel,maxtouch.txt
+++ b/dts/Bindings/input/atmel,maxtouch.txt
@@ -15,6 +15,17 @@ Optional properties for main touchpad device:
keycode generated by each GPIO. Linux keycodes are defined in
<dt-bindings/input/input.h>.
+- linux,gpio-keymap: When enabled, the SPT_GPIOPWN_T19 object sends messages
+ on GPIO bit changes. An array of up to 8 entries can be provided
+ indicating the Linux keycode mapped to each bit of the status byte,
+ starting at the LSB. Linux keycodes are defined in
+ <dt-bindings/input/input.h>.
+
+ Note: the numbering of the GPIOs and the bit they start at varies between
+ maXTouch devices. You must either refer to the documentation, or
+ experiment to determine which bit corresponds to which input. Use
+ KEY_RESERVED for unused padding values.
+
Example:
touch@4b {
diff --git a/dts/Bindings/mfd/tc3589x.txt b/dts/Bindings/mfd/tc3589x.txt
new file mode 100644
index 0000000..6fcedba
--- /dev/null
+++ b/dts/Bindings/mfd/tc3589x.txt
@@ -0,0 +1,107 @@
+* Toshiba TC3589x multi-purpose expander
+
+The Toshiba TC3589x series are I2C-based MFD devices which may expose the
+following built-in devices: gpio, keypad, rotator (vibrator), PWM (for
+e.g. LEDs or vibrators) The included models are:
+
+- TC35890
+- TC35892
+- TC35893
+- TC35894
+- TC35895
+- TC35896
+
+Required properties:
+ - compatible : must be "toshiba,tc35890", "toshiba,tc35892", "toshiba,tc35893",
+ "toshiba,tc35894", "toshiba,tc35895" or "toshiba,tc35896"
+ - reg : I2C address of the device
+ - interrupt-parent : specifies which IRQ controller we're connected to
+ - interrupts : the interrupt on the parent the controller is connected to
+ - interrupt-controller : marks the device node as an interrupt controller
+ - #interrupt-cells : should be <1>, the first cell is the IRQ offset on this
+ TC3589x interrupt controller.
+
+Optional nodes:
+
+- GPIO
+ This GPIO module inside the TC3589x has 24 (TC35890, TC35892) or 20
+ (other models) GPIO lines.
+ - compatible : must be "toshiba,tc3589x-gpio"
+ - interrupts : interrupt on the parent, which must be the tc3589x MFD device
+ - interrupt-controller : marks the device node as an interrupt controller
+ - #interrupt-cells : should be <2>, the first cell is the IRQ offset on this
+ TC3589x GPIO interrupt controller, the second cell is the interrupt flags
+ in accordance with <dt-bindings/interrupt-controller/irq.h>. The following
+ flags are valid:
+ - IRQ_TYPE_LEVEL_LOW
+ - IRQ_TYPE_LEVEL_HIGH
+ - IRQ_TYPE_EDGE_RISING
+ - IRQ_TYPE_EDGE_FALLING
+ - IRQ_TYPE_EDGE_BOTH
+ - gpio-controller : marks the device node as a GPIO controller
+ - #gpio-cells : should be <2>, the first cell is the GPIO offset on this
+ GPIO controller, the second cell is the flags.
+
+- Keypad
+ This keypad is the same on all variants, supporting up to 96 different
+ keys. The linux-specific properties are modeled on those already existing
+ in other input drivers.
+ - compatible : must be "toshiba,tc3589x-keypad"
+ - debounce-delay-ms : debounce interval in milliseconds
+ - keypad,num-rows : number of rows in the matrix, see
+ bindings/input/matrix-keymap.txt
+ - keypad,num-columns : number of columns in the matrix, see
+ bindings/input/matrix-keymap.txt
+ - linux,keymap: the definition can be found in
+ bindings/input/matrix-keymap.txt
+ - linux,no-autorepeat: do no enable autorepeat feature.
+ - linux,wakeup: use any event on keypad as wakeup event.
+
+Example:
+
+tc35893@44 {
+ compatible = "toshiba,tc35893";
+ reg = <0x44>;
+ interrupt-parent = <&gpio6>;
+ interrupts = <26 IRQ_TYPE_EDGE_RISING>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ tc3589x_gpio {
+ compatible = "toshiba,tc3589x-gpio";
+ interrupts = <0>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+ tc3589x_keypad {
+ compatible = "toshiba,tc3589x-keypad";
+ interrupts = <6>;
+ debounce-delay-ms = <4>;
+ keypad,num-columns = <8>;
+ keypad,num-rows = <8>;
+ linux,no-autorepeat;
+ linux,wakeup;
+ linux,keymap = <0x0301006b
+ 0x04010066
+ 0x06040072
+ 0x040200d7
+ 0x0303006a
+ 0x0205000e
+ 0x0607008b
+ 0x0500001c
+ 0x0403000b
+ 0x03040034
+ 0x05020067
+ 0x0305006c
+ 0x040500e7
+ 0x0005009e
+ 0x06020073
+ 0x01030039
+ 0x07060069
+ 0x050500d9>;
+ };
+};
diff --git a/dts/Bindings/mtd/gpmc-nand.txt b/dts/Bindings/mtd/gpmc-nand.txt
index 65f4f7c..ee654e9 100644
--- a/dts/Bindings/mtd/gpmc-nand.txt
+++ b/dts/Bindings/mtd/gpmc-nand.txt
@@ -22,7 +22,7 @@ Optional properties:
width of 8 is assumed.
- ti,nand-ecc-opt: A string setting the ECC layout to use. One of:
- "sw" <deprecated> use "ham1" instead
+ "sw" 1-bit Hamming ecc code via software
"hw" <deprecated> use "ham1" instead
"hw-romcode" <deprecated> use "ham1" instead
"ham1" 1-bit Hamming ecc code
diff --git a/dts/Bindings/net/stmmac.txt b/dts/Bindings/net/stmmac.txt
index 9b03c57..e45ac3f 100644
--- a/dts/Bindings/net/stmmac.txt
+++ b/dts/Bindings/net/stmmac.txt
@@ -39,6 +39,10 @@ Optional properties:
further clocks may be specified in derived bindings.
- clock-names: One name for each entry in the clocks property, the
first one should be "stmmaceth".
+- clk_ptp_ref: this is the PTP reference clock; in case of the PTP is
+ available this clock is used for programming the Timestamp Addend Register.
+ If not passed then the system clock will be used and this is fine on some
+ platforms.
Examples:
diff --git a/dts/Bindings/pinctrl/qcom,apq8064-pinctrl.txt b/dts/Bindings/pinctrl/qcom,apq8064-pinctrl.txt
index 0211c6d..92fae82 100644
--- a/dts/Bindings/pinctrl/qcom,apq8064-pinctrl.txt
+++ b/dts/Bindings/pinctrl/qcom,apq8064-pinctrl.txt
@@ -62,7 +62,7 @@ Example:
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
- interrupts = <0 32 0x4>;
+ interrupts = <0 16 0x4>;
pinctrl-names = "default";
pinctrl-0 = <&gsbi5_uart_default>;
diff --git a/dts/Bindings/regulator/tps65090.txt b/dts/Bindings/regulator/tps65090.txt
index 3409802..ca69f5e 100644
--- a/dts/Bindings/regulator/tps65090.txt
+++ b/dts/Bindings/regulator/tps65090.txt
@@ -45,8 +45,8 @@ Example:
infet5-supply = <&some_reg>;
infet6-supply = <&some_reg>;
infet7-supply = <&some_reg>;
- vsys_l1-supply = <&some_reg>;
- vsys_l2-supply = <&some_reg>;
+ vsys-l1-supply = <&some_reg>;
+ vsys-l2-supply = <&some_reg>;
regulators {
dcdc1 {
diff --git a/dts/Bindings/sound/adi,axi-spdif-tx.txt b/dts/Bindings/sound/adi,axi-spdif-tx.txt
index 46f3449..4eb7997 100644
--- a/dts/Bindings/sound/adi,axi-spdif-tx.txt
+++ b/dts/Bindings/sound/adi,axi-spdif-tx.txt
@@ -1,7 +1,7 @@
ADI AXI-SPDIF controller
Required properties:
- - compatible : Must be "adi,axi-spdif-1.00.a"
+ - compatible : Must be "adi,axi-spdif-tx-1.00.a"
- reg : Must contain SPDIF core's registers location and length
- clocks : Pairs of phandle and specifier referencing the controller's clocks.
The controller expects two clocks, the clock used for the AXI interface and
diff --git a/dts/Bindings/usb/mxs-phy.txt b/dts/Bindings/usb/mxs-phy.txt
index cef181a..96681c9 100644
--- a/dts/Bindings/usb/mxs-phy.txt
+++ b/dts/Bindings/usb/mxs-phy.txt
@@ -5,6 +5,7 @@ Required properties:
* "fsl,imx23-usbphy" for imx23 and imx28
* "fsl,imx6q-usbphy" for imx6dq and imx6dl
* "fsl,imx6sl-usbphy" for imx6sl
+ * "fsl,imx6sx-usbphy" for imx6sx
"fsl,imx23-usbphy" is still a fallback for other strings
- reg: Should contain registers location and length
- interrupts: Should contain phy interrupt
diff --git a/dts/Bindings/video/analog-tv-connector.txt b/dts/Bindings/video/analog-tv-connector.txt
index 0218fcd..0c0970c 100644
--- a/dts/Bindings/video/analog-tv-connector.txt
+++ b/dts/Bindings/video/analog-tv-connector.txt
@@ -2,7 +2,7 @@ Analog TV Connector
===================
Required properties:
-- compatible: "composite-connector" or "svideo-connector"
+- compatible: "composite-video-connector" or "svideo-connector"
Optional properties:
- label: a symbolic name for the connector
@@ -14,7 +14,7 @@ Example
-------
tv: connector {
- compatible = "composite-connector";
+ compatible = "composite-video-connector";
label = "tv";
port {
diff --git a/dts/src/arm/am4372.dtsi b/dts/src/arm/am4372.dtsi
index 9b3d2ba..8689949 100644
--- a/dts/src/arm/am4372.dtsi
+++ b/dts/src/arm/am4372.dtsi
@@ -804,7 +804,7 @@
usb1: usb@48390000 {
compatible = "synopsys,dwc3";
- reg = <0x48390000 0x17000>;
+ reg = <0x48390000 0x10000>;
interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
phys = <&usb2_phy1>;
phy-names = "usb2-phy";
@@ -826,7 +826,7 @@
usb2: usb@483d0000 {
compatible = "synopsys,dwc3";
- reg = <0x483d0000 0x17000>;
+ reg = <0x483d0000 0x10000>;
interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
phys = <&usb2_phy2>;
phy-names = "usb2-phy";
diff --git a/dts/src/arm/am437x-gp-evm.dts b/dts/src/arm/am437x-gp-evm.dts
index 646a6ea..e7ac47f 100644
--- a/dts/src/arm/am437x-gp-evm.dts
+++ b/dts/src/arm/am437x-gp-evm.dts
@@ -260,7 +260,7 @@
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins>;
- clock-frequency = <400000>;
+ clock-frequency = <100000>;
tps65218: tps65218@24 {
reg = <0x24>;
@@ -424,7 +424,7 @@
ranges = <0 0 0 0x01000000>; /* minimum GPMC partition = 16MB */
nand@0,0 {
reg = <0 0 4>; /* device IO registers */
- ti,nand-ecc-opt = "bch8";
+ ti,nand-ecc-opt = "bch16";
ti,elm-id = <&elm>;
nand-bus-width = <8>;
gpmc,device-width = <1>;
@@ -443,8 +443,6 @@
gpmc,rd-cycle-ns = <40>;
gpmc,wr-cycle-ns = <40>;
gpmc,wait-pin = <0>;
- gpmc,wait-on-read;
- gpmc,wait-on-write;
gpmc,bus-turnaround-ns = <0>;
gpmc,cycle2cycle-delay-ns = <0>;
gpmc,clk-activation-ns = <0>;
diff --git a/dts/src/arm/am43x-epos-evm.dts b/dts/src/arm/am43x-epos-evm.dts
index ed7dd23..ac3e485 100644
--- a/dts/src/arm/am43x-epos-evm.dts
+++ b/dts/src/arm/am43x-epos-evm.dts
@@ -435,13 +435,13 @@
};
&gpmc {
- status = "okay";
+ status = "okay"; /* Disable QSPI when enabling GPMC (NAND) */
pinctrl-names = "default";
pinctrl-0 = <&nand_flash_x8>;
ranges = <0 0 0x08000000 0x10000000>; /* CS0: NAND */
nand@0,0 {
reg = <0 0 0>; /* CS0, offset 0 */
- ti,nand-ecc-opt = "bch8";
+ ti,nand-ecc-opt = "bch16";
ti,elm-id = <&elm>;
nand-bus-width = <8>;
gpmc,device-width = <1>;
@@ -459,8 +459,7 @@
gpmc,access-ns = <30>; /* tCEA + 4*/
gpmc,rd-cycle-ns = <40>;
gpmc,wr-cycle-ns = <40>;
- gpmc,wait-on-read = "true";
- gpmc,wait-on-write = "true";
+ gpmc,wait-pin = <0>;
gpmc,bus-turnaround-ns = <0>;
gpmc,cycle2cycle-delay-ns = <0>;
gpmc,clk-activation-ns = <0>;
@@ -557,7 +556,7 @@
};
&qspi {
- status = "okay";
+ status = "disabled"; /* Disable GPMC (NAND) when enabling QSPI */
pinctrl-names = "default";
pinctrl-0 = <&qspi1_default>;
diff --git a/dts/src/arm/at91rm9200.dtsi b/dts/src/arm/at91rm9200.dtsi
index 65ccf56..6c97d4a 100644
--- a/dts/src/arm/at91rm9200.dtsi
+++ b/dts/src/arm/at91rm9200.dtsi
@@ -149,7 +149,7 @@
usb: usbck {
compatible = "atmel,at91rm9200-clk-usb";
#clock-cells = <0>;
- atmel,clk-divisors = <1 2>;
+ atmel,clk-divisors = <1 2 0 0>;
clocks = <&pllb>;
};
diff --git a/dts/src/arm/at91sam9g20.dtsi b/dts/src/arm/at91sam9g20.dtsi
index 31f7652..4e0abbd 100644
--- a/dts/src/arm/at91sam9g20.dtsi
+++ b/dts/src/arm/at91sam9g20.dtsi
@@ -40,6 +40,7 @@
};
pllb: pllbck {
+ compatible = "atmel,at91sam9g20-clk-pllb";
atmel,clk-input-range = <2000000 32000000>;
atmel,pll-clk-output-ranges = <30000000 100000000 0 0>;
};
diff --git a/dts/src/arm/dra7-evm.dts b/dts/src/arm/dra7-evm.dts
index 50f8022..e03fbf3 100644
--- a/dts/src/arm/dra7-evm.dts
+++ b/dts/src/arm/dra7-evm.dts
@@ -8,6 +8,7 @@
/dts-v1/;
#include "dra74x.dtsi"
+#include <dt-bindings/gpio/gpio.h>
/ {
model = "TI DRA742";
@@ -24,9 +25,29 @@
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
+
+ vtt_fixed: fixedregulator-vtt {
+ compatible = "regulator-fixed";
+ regulator-name = "vtt_fixed";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-boot-on;
+ enable-active-high;
+ gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>;
+ };
};
&dra7_pmx_core {
+ pinctrl-names = "default";
+ pinctrl-0 = <&vtt_pin>;
+
+ vtt_pin: pinmux_vtt_pin {
+ pinctrl-single,pins = <
+ 0x3b4 (PIN_OUTPUT | MUX_MODE14) /* spi1_cs1.gpio7_11 */
+ >;
+ };
+
i2c1_pins: pinmux_i2c1_pins {
pinctrl-single,pins = <
0x400 (PIN_INPUT | MUX_MODE0) /* i2c1_sda */
@@ -43,20 +64,19 @@
i2c3_pins: pinmux_i2c3_pins {
pinctrl-single,pins = <
- 0x410 (PIN_INPUT | MUX_MODE0) /* i2c3_sda */
- 0x414 (PIN_INPUT | MUX_MODE0) /* i2c3_scl */
+ 0x288 (PIN_INPUT | MUX_MODE9) /* gpio6_14.i2c3_sda */
+ 0x28c (PIN_INPUT | MUX_MODE9) /* gpio6_15.i2c3_scl */
>;
};
mcspi1_pins: pinmux_mcspi1_pins {
pinctrl-single,pins = <
- 0x3a4 (PIN_INPUT | MUX_MODE0) /* spi2_clk */
- 0x3a8 (PIN_INPUT | MUX_MODE0) /* spi2_d1 */
- 0x3ac (PIN_INPUT | MUX_MODE0) /* spi2_d0 */
- 0x3b0 (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_cs0 */
- 0x3b4 (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_cs1 */
- 0x3b8 (PIN_INPUT_SLEW | MUX_MODE6) /* spi2_cs2 */
- 0x3bc (PIN_INPUT_SLEW | MUX_MODE6) /* spi2_cs3 */
+ 0x3a4 (PIN_INPUT | MUX_MODE0) /* spi1_sclk */
+ 0x3a8 (PIN_INPUT | MUX_MODE0) /* spi1_d1 */
+ 0x3ac (PIN_INPUT | MUX_MODE0) /* spi1_d0 */
+ 0x3b0 (PIN_INPUT_SLEW | MUX_MODE0) /* spi1_cs0 */
+ 0x3b8 (PIN_INPUT_SLEW | MUX_MODE6) /* spi1_cs2.hdmi1_hpd */
+ 0x3bc (PIN_INPUT_SLEW | MUX_MODE6) /* spi1_cs3.hdmi1_cec */
>;
};
@@ -284,7 +304,7 @@
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&i2c3_pins>;
- clock-frequency = <3400000>;
+ clock-frequency = <400000>;
};
&mcspi1 {
@@ -483,7 +503,7 @@
reg = <0x001c0000 0x00020000>;
};
partition@7 {
- label = "NAND.u-boot-env";
+ label = "NAND.u-boot-env.backup1";
reg = <0x001e0000 0x00020000>;
};
partition@8 {
@@ -504,3 +524,8 @@
&usb2_phy2 {
phy-supply = <&ldousb_reg>;
};
+
+&gpio7 {
+ ti,no-reset-on-init;
+ ti,no-idle-on-init;
+};
diff --git a/dts/src/arm/dra7.dtsi b/dts/src/arm/dra7.dtsi
index 97f603c..d678152 100644
--- a/dts/src/arm/dra7.dtsi
+++ b/dts/src/arm/dra7.dtsi
@@ -245,7 +245,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpio2: gpio@48055000 {
@@ -256,7 +256,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpio3: gpio@48057000 {
@@ -267,7 +267,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpio4: gpio@48059000 {
@@ -278,7 +278,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpio5: gpio@4805b000 {
@@ -289,7 +289,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpio6: gpio@4805d000 {
@@ -300,7 +300,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpio7: gpio@48051000 {
@@ -311,7 +311,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpio8: gpio@48053000 {
@@ -322,7 +322,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
uart1: serial@4806a000 {
diff --git a/dts/src/arm/imx53-qsrb.dts b/dts/src/arm/imx53-qsrb.dts
index f1bbf9a..82d623d 100644
--- a/dts/src/arm/imx53-qsrb.dts
+++ b/dts/src/arm/imx53-qsrb.dts
@@ -28,6 +28,12 @@
MX53_PAD_CSI0_DAT9__I2C1_SCL 0x400001ec
>;
};
+
+ pinctrl_pmic: pmicgrp {
+ fsl,pins = <
+ MX53_PAD_CSI0_DAT5__GPIO5_23 0x1e4 /* IRQ */
+ >;
+ };
};
};
@@ -38,6 +44,8 @@
pmic: mc34708@8 {
compatible = "fsl,mc34708";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pmic>;
reg = <0x08>;
interrupt-parent = <&gpio5>;
interrupts = <23 0x8>;
diff --git a/dts/src/arm/imx6dl-hummingboard.dts b/dts/src/arm/imx6dl-hummingboard.dts
index c8e51dd..7159854 100644
--- a/dts/src/arm/imx6dl-hummingboard.dts
+++ b/dts/src/arm/imx6dl-hummingboard.dts
@@ -58,7 +58,7 @@
sound-spdif {
compatible = "fsl,imx-audio-spdif";
- model = "imx-spdif";
+ model = "On-board SPDIF";
/* IMX6 doesn't implement this yet */
spdif-controller = <&spdif>;
spdif-out;
@@ -181,11 +181,13 @@
};
&usbh1 {
+ disable-over-current;
vbus-supply = <&reg_usbh1_vbus>;
status = "okay";
};
&usbotg {
+ disable-over-current;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hummingboard_usbotg_id>;
vbus-supply = <&reg_usbotg_vbus>;
diff --git a/dts/src/arm/imx6qdl-cubox-i.dtsi b/dts/src/arm/imx6qdl-cubox-i.dtsi
index e8e7816..6a524ca 100644
--- a/dts/src/arm/imx6qdl-cubox-i.dtsi
+++ b/dts/src/arm/imx6qdl-cubox-i.dtsi
@@ -61,7 +61,7 @@
sound-spdif {
compatible = "fsl,imx-audio-spdif";
- model = "imx-spdif";
+ model = "Integrated SPDIF";
/* IMX6 doesn't implement this yet */
spdif-controller = <&spdif>;
spdif-out;
@@ -130,16 +130,23 @@
fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>;
};
+ pinctrl_cubox_i_usbh1: cubox-i-usbh1 {
+ fsl,pins = <MX6QDL_PAD_GPIO_3__USB_H1_OC 0x1b0b0>;
+ };
+
pinctrl_cubox_i_usbh1_vbus: cubox-i-usbh1-vbus {
fsl,pins = <MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x4001b0b0>;
};
- pinctrl_cubox_i_usbotg_id: cubox-i-usbotg-id {
+ pinctrl_cubox_i_usbotg: cubox-i-usbotg {
/*
- * The Cubox-i pulls this low, but as it's pointless
+ * The Cubox-i pulls ID low, but as it's pointless
* leaving it as a pull-up, even if it is just 10uA.
*/
- fsl,pins = <MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059>;
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059
+ MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0
+ >;
};
pinctrl_cubox_i_usbotg_vbus: cubox-i-usbotg-vbus {
@@ -173,13 +180,15 @@
};
&usbh1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_cubox_i_usbh1>;
vbus-supply = <&reg_usbh1_vbus>;
status = "okay";
};
&usbotg {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_cubox_i_usbotg_id>;
+ pinctrl-0 = <&pinctrl_cubox_i_usbotg>;
vbus-supply = <&reg_usbotg_vbus>;
status = "okay";
};
diff --git a/dts/src/arm/imx6qdl-microsom-ar8035.dtsi b/dts/src/arm/imx6qdl-microsom-ar8035.dtsi
index d160666..db9f45b 100644
--- a/dts/src/arm/imx6qdl-microsom-ar8035.dtsi
+++ b/dts/src/arm/imx6qdl-microsom-ar8035.dtsi
@@ -17,7 +17,7 @@
enet {
pinctrl_microsom_enet_ar8035: microsom-enet-ar8035 {
fsl,pins = <
- MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b8b0
MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
/* AR8035 reset */
MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x130b0
diff --git a/dts/src/arm/omap3-beagle.dts b/dts/src/arm/omap3-beagle.dts
index 3c3e6da..a9aae88 100644
--- a/dts/src/arm/omap3-beagle.dts
+++ b/dts/src/arm/omap3-beagle.dts
@@ -292,6 +292,7 @@
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&uart3_pins>;
+ interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
};
&gpio1 {
diff --git a/dts/src/arm/omap3-n900.dts b/dts/src/arm/omap3-n900.dts
index b15f1a7..4361777 100644
--- a/dts/src/arm/omap3-n900.dts
+++ b/dts/src/arm/omap3-n900.dts
@@ -93,7 +93,7 @@
};
tv: connector {
- compatible = "composite-connector";
+ compatible = "composite-video-connector";
label = "tv";
port {
@@ -353,7 +353,7 @@
};
twl_power: power {
- compatible = "ti,twl4030-power-n900";
+ compatible = "ti,twl4030-power-n900", "ti,twl4030-power-idle-osc-off";
ti,use_poweroff;
};
};
diff --git a/dts/src/arm/omap3430-sdp.dts b/dts/src/arm/omap3430-sdp.dts
index 02f69f4..9bad94e 100644
--- a/dts/src/arm/omap3430-sdp.dts
+++ b/dts/src/arm/omap3430-sdp.dts
@@ -107,7 +107,7 @@
#address-cells = <1>;
#size-cells = <1>;
reg = <1 0 0x08000000>;
- ti,nand-ecc-opt = "ham1";
+ ti,nand-ecc-opt = "sw";
nand-bus-width = <8>;
gpmc,cs-on-ns = <0>;
gpmc,cs-rd-off-ns = <36>;
diff --git a/dts/src/arm/omap3xxx-clocks.dtsi b/dts/src/arm/omap3xxx-clocks.dtsi
index e47ff69..5c37500 100644
--- a/dts/src/arm/omap3xxx-clocks.dtsi
+++ b/dts/src/arm/omap3xxx-clocks.dtsi
@@ -467,6 +467,7 @@
ti,bit-shift = <0x1e>;
reg = <0x0d00>;
ti,set-bit-to-disable;
+ ti,set-rate-parent;
};
dpll4_m6_ck: dpll4_m6_ck {
diff --git a/dts/src/arm/omap54xx-clocks.dtsi b/dts/src/arm/omap54xx-clocks.dtsi
index e67a23b..58c2746 100644
--- a/dts/src/arm/omap54xx-clocks.dtsi
+++ b/dts/src/arm/omap54xx-clocks.dtsi
@@ -367,10 +367,12 @@
l3_iclk_div: l3_iclk_div {
#clock-cells = <0>;
- compatible = "fixed-factor-clock";
+ compatible = "ti,divider-clock";
+ ti,max-div = <2>;
+ ti,bit-shift = <4>;
+ reg = <0x100>;
clocks = <&dpll_core_h12x2_ck>;
- clock-mult = <1>;
- clock-div = <1>;
+ ti,index-power-of-two;
};
gpu_l3_iclk: gpu_l3_iclk {
@@ -383,10 +385,12 @@
l4_root_clk_div: l4_root_clk_div {
#clock-cells = <0>;
- compatible = "fixed-factor-clock";
+ compatible = "ti,divider-clock";
+ ti,max-div = <2>;
+ ti,bit-shift = <8>;
+ reg = <0x100>;
clocks = <&l3_iclk_div>;
- clock-mult = <1>;
- clock-div = <1>;
+ ti,index-power-of-two;
};
slimbus1_slimbus_clk: slimbus1_slimbus_clk {
diff --git a/dts/src/arm/ste-snowball.dts b/dts/src/arm/ste-snowball.dts
index 4a2000c..3e97a66 100644
--- a/dts/src/arm/ste-snowball.dts
+++ b/dts/src/arm/ste-snowball.dts
@@ -116,7 +116,6 @@
msp2: msp@80117000 {
pinctrl-names = "default";
pinctrl-0 = <&msp2_default_mode>;
- status = "okay";
};
msp3: msp@80125000 {
diff --git a/dts/src/arm/twl6030.dtsi b/dts/src/arm/twl6030.dtsi
index 2e3bd31..55eb35f 100644
--- a/dts/src/arm/twl6030.dtsi
+++ b/dts/src/arm/twl6030.dtsi
@@ -83,10 +83,6 @@
regulator-always-on;
};
- clk32kg: regulator-clk32kg {
- compatible = "ti,twl6030-clk32kg";
- };
-
twl_usb_comparator: usb-comparator {
compatible = "ti,twl6030-usb";
interrupts = <4>, <10>;
diff --git a/dts/src/xtensa/kc705.dts b/dts/src/xtensa/kc705.dts
index 742a347..c4d17a3 100644
--- a/dts/src/xtensa/kc705.dts
+++ b/dts/src/xtensa/kc705.dts
@@ -4,8 +4,11 @@
/ {
compatible = "cdns,xtensa-kc705";
+ chosen {
+ bootargs = "earlycon=uart8250,mmio32,0xfd050020,115200n8 console=ttyS0,115200n8 ip=dhcp root=/dev/nfs rw debug memmap=0x38000000";
+ };
memory@0 {
device_type = "memory";
- reg = <0x00000000 0x08000000>;
+ reg = <0x00000000 0x38000000>;
};
};