diff options
| -rw-r--r-- | dts/Bindings/thermal/exynos-thermal.txt | 23 | ||||
| -rw-r--r-- | dts/Bindings/thermal/thermal.txt | 16 | ||||
| -rw-r--r-- | dts/Bindings/timer/nuvoton,npcm7xx-timer.txt | 21 | ||||
| -rw-r--r-- | dts/Bindings/timer/nxp,tpm-timer.txt | 2 | ||||
| -rw-r--r-- | dts/src/mips/img/boston.dts | 6 |
5 files changed, 34 insertions, 34 deletions
diff --git a/dts/Bindings/thermal/exynos-thermal.txt b/dts/Bindings/thermal/exynos-thermal.txt index 1b596fd38d..b957acff57 100644 --- a/dts/Bindings/thermal/exynos-thermal.txt +++ b/dts/Bindings/thermal/exynos-thermal.txt @@ -49,19 +49,6 @@ on the SoC (only first trip points defined in DT will be configured): - samsung,exynos5433-tmu: 8 - samsung,exynos7-tmu: 8 -Following properties are mandatory (depending on SoC): -- samsung,tmu_gain: Gain value for internal TMU operation. -- samsung,tmu_reference_voltage: Value of TMU IP block's reference voltage -- samsung,tmu_noise_cancel_mode: Mode for noise cancellation -- samsung,tmu_efuse_value: Default level of temperature - it is needed when - in factory fusing produced wrong value -- samsung,tmu_min_efuse_value: Minimum temperature fused value -- samsung,tmu_max_efuse_value: Maximum temperature fused value -- samsung,tmu_first_point_trim: First point trimming value -- samsung,tmu_second_point_trim: Second point trimming value -- samsung,tmu_default_temp_offset: Default temperature offset -- samsung,tmu_cal_type: Callibration type - ** Optional properties: - vtmu-supply: This entry is optional and provides the regulator node supplying @@ -78,7 +65,7 @@ Example 1): clocks = <&clock 383>; clock-names = "tmu_apbif"; vtmu-supply = <&tmu_regulator_node>; - #include "exynos4412-tmu-sensor-conf.dtsi" + #thermal-sensor-cells = <0>; }; Example 2): @@ -89,7 +76,7 @@ Example 2): interrupts = <0 58 0>; clocks = <&clock 21>; clock-names = "tmu_apbif"; - #include "exynos5440-tmu-sensor-conf.dtsi" + #thermal-sensor-cells = <0>; }; Example 3): (In case of Exynos5420 "with misplaced TRIMINFO register") @@ -99,7 +86,7 @@ Example 3): (In case of Exynos5420 "with misplaced TRIMINFO register") interrupts = <0 184 0>; clocks = <&clock 318>, <&clock 318>; clock-names = "tmu_apbif", "tmu_triminfo_apbif"; - #include "exynos4412-tmu-sensor-conf.dtsi" + #thermal-sensor-cells = <0>; }; tmu_cpu3: tmu@1006c000 { @@ -108,7 +95,7 @@ Example 3): (In case of Exynos5420 "with misplaced TRIMINFO register") interrupts = <0 185 0>; clocks = <&clock 318>, <&clock 319>; clock-names = "tmu_apbif", "tmu_triminfo_apbif"; - #include "exynos4412-tmu-sensor-conf.dtsi" + #thermal-sensor-cells = <0>; }; tmu_gpu: tmu@100a0000 { @@ -117,7 +104,7 @@ Example 3): (In case of Exynos5420 "with misplaced TRIMINFO register") interrupts = <0 215 0>; clocks = <&clock 319>, <&clock 318>; clock-names = "tmu_apbif", "tmu_triminfo_apbif"; - #include "exynos4412-tmu-sensor-conf.dtsi" + #thermal-sensor-cells = <0>; }; Note: For multi-instance tmu each instance should have an alias correctly diff --git a/dts/Bindings/thermal/thermal.txt b/dts/Bindings/thermal/thermal.txt index 1719d47a5e..cc553f0952 100644 --- a/dts/Bindings/thermal/thermal.txt +++ b/dts/Bindings/thermal/thermal.txt @@ -55,8 +55,7 @@ of heat dissipation). For example a fan's cooling states correspond to the different fan speeds possible. Cooling states are referred to by single unsigned integers, where larger numbers mean greater heat dissipation. The precise set of cooling states associated with a device -(as referred to by the cooling-min-level and cooling-max-level -properties) should be defined in a particular device's binding. +should be defined in a particular device's binding. For more examples of cooling devices, refer to the example sections below. Required properties: @@ -69,15 +68,6 @@ Required properties: See Cooling device maps section below for more details on how consumers refer to cooling devices. -Optional properties: -- cooling-min-level: An integer indicating the smallest - Type: unsigned cooling state accepted. Typically 0. - Size: one cell - -- cooling-max-level: An integer indicating the largest - Type: unsigned cooling state accepted. - Size: one cell - * Trip points The trip node is a node to describe a point in the temperature domain @@ -226,8 +216,6 @@ cpus { 396000 950000 198000 850000 >; - cooling-min-level = <0>; - cooling-max-level = <3>; #cooling-cells = <2>; /* min followed by max */ }; ... @@ -241,8 +229,6 @@ cpus { */ fan0: fan@48 { ... - cooling-min-level = <0>; - cooling-max-level = <9>; #cooling-cells = <2>; /* min followed by max */ }; }; diff --git a/dts/Bindings/timer/nuvoton,npcm7xx-timer.txt b/dts/Bindings/timer/nuvoton,npcm7xx-timer.txt new file mode 100644 index 0000000000..ea22dfe485 --- /dev/null +++ b/dts/Bindings/timer/nuvoton,npcm7xx-timer.txt @@ -0,0 +1,21 @@ +Nuvoton NPCM7xx timer + +Nuvoton NPCM7xx have three timer modules, each timer module provides five 24-bit +timer counters. + +Required properties: +- compatible : "nuvoton,npcm750-timer" for Poleg NPCM750. +- reg : Offset and length of the register set for the device. +- interrupts : Contain the timer interrupt with flags for + falling edge. +- clocks : phandle of timer reference clock (usually a 25 MHz clock). + +Example: + +timer@f0008000 { + compatible = "nuvoton,npcm750-timer"; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xf0008000 0x50>; + clocks = <&clk NPCM7XX_CLK_TIMER>; +}; + diff --git a/dts/Bindings/timer/nxp,tpm-timer.txt b/dts/Bindings/timer/nxp,tpm-timer.txt index b4aa7ddb5b..f82087b220 100644 --- a/dts/Bindings/timer/nxp,tpm-timer.txt +++ b/dts/Bindings/timer/nxp,tpm-timer.txt @@ -15,7 +15,7 @@ Required properties: - interrupts : Should be the clock event device interrupt. - clocks : The clocks provided by the SoC to drive the timer, must contain an entry for each entry in clock-names. -- clock-names : Must include the following entries: "igp" and "per". +- clock-names : Must include the following entries: "ipg" and "per". Example: tpm5: tpm@40260000 { diff --git a/dts/src/mips/img/boston.dts b/dts/src/mips/img/boston.dts index 1bd105428f..65af3f6ba8 100644 --- a/dts/src/mips/img/boston.dts +++ b/dts/src/mips/img/boston.dts @@ -51,6 +51,8 @@ ranges = <0x02000000 0 0x40000000 0x40000000 0 0x40000000>; + bus-range = <0x00 0xff>; + interrupt-map-mask = <0 0 0 7>; interrupt-map = <0 0 0 1 &pci0_intc 1>, <0 0 0 2 &pci0_intc 2>, @@ -79,6 +81,8 @@ ranges = <0x02000000 0 0x20000000 0x20000000 0 0x20000000>; + bus-range = <0x00 0xff>; + interrupt-map-mask = <0 0 0 7>; interrupt-map = <0 0 0 1 &pci1_intc 1>, <0 0 0 2 &pci1_intc 2>, @@ -107,6 +111,8 @@ ranges = <0x02000000 0 0x16000000 0x16000000 0 0x100000>; + bus-range = <0x00 0xff>; + interrupt-map-mask = <0 0 0 7>; interrupt-map = <0 0 0 1 &pci2_intc 1>, <0 0 0 2 &pci2_intc 2>, |