summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--dts/Bindings/clock/sunxi-ccu.txt7
-rw-r--r--dts/Bindings/gpio/gpio-mvebu.txt6
-rw-r--r--dts/Bindings/mfd/stm32-timers.txt2
-rw-r--r--dts/Bindings/net/dsa/b53.txt2
-rw-r--r--dts/Bindings/net/smsc911x.txt1
-rw-r--r--dts/include/dt-bindings/clock/sun50i-a64-ccu.h2
-rw-r--r--dts/include/dt-bindings/clock/sun8i-h3-ccu.h2
7 files changed, 14 insertions, 8 deletions
diff --git a/dts/Bindings/clock/sunxi-ccu.txt b/dts/Bindings/clock/sunxi-ccu.txt
index e9c5a1d983..f465647a4d 100644
--- a/dts/Bindings/clock/sunxi-ccu.txt
+++ b/dts/Bindings/clock/sunxi-ccu.txt
@@ -22,7 +22,8 @@ Required properties :
- #clock-cells : must contain 1
- #reset-cells : must contain 1
-For the PRCM CCUs on H3/A64, one more clock is needed:
+For the PRCM CCUs on H3/A64, two more clocks are needed:
+- "pll-periph": the SoC's peripheral PLL from the main CCU
- "iosc": the SoC's internal frequency oscillator
Example for generic CCU:
@@ -39,8 +40,8 @@ Example for PRCM CCU:
r_ccu: clock@01f01400 {
compatible = "allwinner,sun50i-a64-r-ccu";
reg = <0x01f01400 0x100>;
- clocks = <&osc24M>, <&osc32k>, <&iosc>;
- clock-names = "hosc", "losc", "iosc";
+ clocks = <&osc24M>, <&osc32k>, <&iosc>, <&ccu CLK_PLL_PERIPH0>;
+ clock-names = "hosc", "losc", "iosc", "pll-periph";
#clock-cells = <1>;
#reset-cells = <1>;
};
diff --git a/dts/Bindings/gpio/gpio-mvebu.txt b/dts/Bindings/gpio/gpio-mvebu.txt
index 42c3bb2d53..01e331a5f3 100644
--- a/dts/Bindings/gpio/gpio-mvebu.txt
+++ b/dts/Bindings/gpio/gpio-mvebu.txt
@@ -41,9 +41,9 @@ Required properties:
Optional properties:
In order to use the GPIO lines in PWM mode, some additional optional
-properties are required. Only Armada 370 and XP support these properties.
+properties are required.
-- compatible: Must contain "marvell,armada-370-xp-gpio"
+- compatible: Must contain "marvell,armada-370-gpio"
- reg: an additional register set is needed, for the GPIO Blink
Counter on/off registers.
@@ -71,7 +71,7 @@ Example:
};
gpio1: gpio@18140 {
- compatible = "marvell,armada-370-xp-gpio";
+ compatible = "marvell,armada-370-gpio";
reg = <0x18140 0x40>, <0x181c8 0x08>;
reg-names = "gpio", "pwm";
ngpios = <17>;
diff --git a/dts/Bindings/mfd/stm32-timers.txt b/dts/Bindings/mfd/stm32-timers.txt
index bbd083f560..1db6e0057a 100644
--- a/dts/Bindings/mfd/stm32-timers.txt
+++ b/dts/Bindings/mfd/stm32-timers.txt
@@ -31,7 +31,7 @@ Example:
compatible = "st,stm32-timers";
reg = <0x40010000 0x400>;
clocks = <&rcc 0 160>;
- clock-names = "clk_int";
+ clock-names = "int";
pwm {
compatible = "st,stm32-pwm";
diff --git a/dts/Bindings/net/dsa/b53.txt b/dts/Bindings/net/dsa/b53.txt
index d6c6e41648..8ec2ca21ad 100644
--- a/dts/Bindings/net/dsa/b53.txt
+++ b/dts/Bindings/net/dsa/b53.txt
@@ -34,7 +34,7 @@ Required properties:
"brcm,bcm6328-switch"
"brcm,bcm6368-switch" and the mandatory "brcm,bcm63xx-switch"
-See Documentation/devicetree/bindings/dsa/dsa.txt for a list of additional
+See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of additional
required and optional properties.
Examples:
diff --git a/dts/Bindings/net/smsc911x.txt b/dts/Bindings/net/smsc911x.txt
index 16c3a9501f..acfafc8e14 100644
--- a/dts/Bindings/net/smsc911x.txt
+++ b/dts/Bindings/net/smsc911x.txt
@@ -27,6 +27,7 @@ Optional properties:
of the device. On many systems this is wired high so the device goes
out of reset at power-on, but if it is under program control, this
optional GPIO can wake up in response to it.
+- vdd33a-supply, vddvario-supply : 3.3V analog and IO logic power supplies
Examples:
diff --git a/dts/include/dt-bindings/clock/sun50i-a64-ccu.h b/dts/include/dt-bindings/clock/sun50i-a64-ccu.h
index 370c0a0473..d66432c6e6 100644
--- a/dts/include/dt-bindings/clock/sun50i-a64-ccu.h
+++ b/dts/include/dt-bindings/clock/sun50i-a64-ccu.h
@@ -43,6 +43,8 @@
#ifndef _DT_BINDINGS_CLK_SUN50I_A64_H_
#define _DT_BINDINGS_CLK_SUN50I_A64_H_
+#define CLK_PLL_PERIPH0 11
+
#define CLK_BUS_MIPI_DSI 28
#define CLK_BUS_CE 29
#define CLK_BUS_DMA 30
diff --git a/dts/include/dt-bindings/clock/sun8i-h3-ccu.h b/dts/include/dt-bindings/clock/sun8i-h3-ccu.h
index c2afc41d69..e139fe5c62 100644
--- a/dts/include/dt-bindings/clock/sun8i-h3-ccu.h
+++ b/dts/include/dt-bindings/clock/sun8i-h3-ccu.h
@@ -43,6 +43,8 @@
#ifndef _DT_BINDINGS_CLK_SUN8I_H3_H_
#define _DT_BINDINGS_CLK_SUN8I_H3_H_
+#define CLK_PLL_PERIPH0 9
+
#define CLK_CPUX 14
#define CLK_BUS_CE 20