summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--dts/Bindings/mtd/jedec,spi-nor.txt (renamed from dts/Bindings/mtd/m25p80.txt)6
-rw-r--r--dts/src/arm/armada-375.dtsi2
-rw-r--r--dts/src/arm/armada-38x.dtsi2
-rw-r--r--dts/src/arm/armada-39x.dtsi2
-rw-r--r--dts/src/arm/dove-cubox.dts1
-rw-r--r--dts/src/arm/exynos5420-peach-pit.dts1
-rw-r--r--dts/src/arm/exynos5800-peach-pi.dts1
-rw-r--r--dts/src/arm/tegra124.dtsi8
-rw-r--r--dts/src/arm/vexpress-v2p-ca15_a7.dts1
-rw-r--r--dts/src/arm/vexpress-v2p-ca9.dts11
-rw-r--r--dts/src/arm64/arm/juno-motherboard.dtsi31
11 files changed, 48 insertions, 18 deletions
diff --git a/dts/Bindings/mtd/m25p80.txt b/dts/Bindings/mtd/jedec,spi-nor.txt
index f20b111b50..2bee68103b 100644
--- a/dts/Bindings/mtd/m25p80.txt
+++ b/dts/Bindings/mtd/jedec,spi-nor.txt
@@ -8,8 +8,8 @@ Required properties:
is not Linux-only, but in case of Linux, see the "m25p_ids"
table in drivers/mtd/devices/m25p80.c for the list of supported
chips.
- Must also include "nor-jedec" for any SPI NOR flash that can be
- identified by the JEDEC READ ID opcode (0x9F).
+ Must also include "jedec,spi-nor" for any SPI NOR flash that can
+ be identified by the JEDEC READ ID opcode (0x9F).
- reg : Chip-Select number
- spi-max-frequency : Maximum frequency of the SPI bus the chip can operate at
@@ -25,7 +25,7 @@ Example:
flash: m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "spansion,m25p80", "nor-jedec";
+ compatible = "spansion,m25p80", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <40000000>;
m25p,fast-read;
diff --git a/dts/src/arm/armada-375.dtsi b/dts/src/arm/armada-375.dtsi
index c675257f23..f076ff856d 100644
--- a/dts/src/arm/armada-375.dtsi
+++ b/dts/src/arm/armada-375.dtsi
@@ -69,7 +69,7 @@
mainpll: mainpll {
compatible = "fixed-clock";
#clock-cells = <0>;
- clock-frequency = <2000000000>;
+ clock-frequency = <1000000000>;
};
/* 25 MHz reference crystal */
refclk: oscillator {
diff --git a/dts/src/arm/armada-38x.dtsi b/dts/src/arm/armada-38x.dtsi
index ed2dd8ba40..218a2acd36 100644
--- a/dts/src/arm/armada-38x.dtsi
+++ b/dts/src/arm/armada-38x.dtsi
@@ -585,7 +585,7 @@
mainpll: mainpll {
compatible = "fixed-clock";
#clock-cells = <0>;
- clock-frequency = <2000000000>;
+ clock-frequency = <1000000000>;
};
/* 25 MHz reference crystal */
diff --git a/dts/src/arm/armada-39x.dtsi b/dts/src/arm/armada-39x.dtsi
index 0e85fc15ce..ecd1318109 100644
--- a/dts/src/arm/armada-39x.dtsi
+++ b/dts/src/arm/armada-39x.dtsi
@@ -502,7 +502,7 @@
mainpll: mainpll {
compatible = "fixed-clock";
#clock-cells = <0>;
- clock-frequency = <2000000000>;
+ clock-frequency = <1000000000>;
};
};
};
diff --git a/dts/src/arm/dove-cubox.dts b/dts/src/arm/dove-cubox.dts
index aae7efc09b..e6fa251e17 100644
--- a/dts/src/arm/dove-cubox.dts
+++ b/dts/src/arm/dove-cubox.dts
@@ -87,6 +87,7 @@
/* connect xtal input to 25MHz reference */
clocks = <&ref25>;
+ clock-names = "xtal";
/* connect xtal input as source of pll0 and pll1 */
silabs,pll-source = <0 0>, <1 0>;
diff --git a/dts/src/arm/exynos5420-peach-pit.dts b/dts/src/arm/exynos5420-peach-pit.dts
index 0788d08fb4..146e71118a 100644
--- a/dts/src/arm/exynos5420-peach-pit.dts
+++ b/dts/src/arm/exynos5420-peach-pit.dts
@@ -711,6 +711,7 @@
num-slots = <1>;
broken-cd;
cap-sdio-irq;
+ keep-power-in-suspend;
card-detect-delay = <200>;
clock-frequency = <400000000>;
samsung,dw-mshc-ciu-div = <1>;
diff --git a/dts/src/arm/exynos5800-peach-pi.dts b/dts/src/arm/exynos5800-peach-pi.dts
index 412f41d626..02eb8b1537 100644
--- a/dts/src/arm/exynos5800-peach-pi.dts
+++ b/dts/src/arm/exynos5800-peach-pi.dts
@@ -674,6 +674,7 @@
num-slots = <1>;
broken-cd;
cap-sdio-irq;
+ keep-power-in-suspend;
card-detect-delay = <200>;
clock-frequency = <400000000>;
samsung,dw-mshc-ciu-div = <1>;
diff --git a/dts/src/arm/tegra124.dtsi b/dts/src/arm/tegra124.dtsi
index cf01c818b8..13cc7ca5e0 100644
--- a/dts/src/arm/tegra124.dtsi
+++ b/dts/src/arm/tegra124.dtsi
@@ -826,7 +826,7 @@
<&tegra_car TEGRA124_CLK_PLL_U>,
<&tegra_car TEGRA124_CLK_USBD>;
clock-names = "reg", "pll_u", "utmi-pads";
- resets = <&tegra_car 59>, <&tegra_car 22>;
+ resets = <&tegra_car 22>, <&tegra_car 22>;
reset-names = "usb", "utmi-pads";
nvidia,hssync-start-delay = <0>;
nvidia,idle-wait-delay = <17>;
@@ -838,6 +838,7 @@
nvidia,hssquelch-level = <2>;
nvidia,hsdiscon-level = <5>;
nvidia,xcvr-hsslew = <12>;
+ nvidia,has-utmi-pad-registers;
status = "disabled";
};
@@ -862,7 +863,7 @@
<&tegra_car TEGRA124_CLK_PLL_U>,
<&tegra_car TEGRA124_CLK_USBD>;
clock-names = "reg", "pll_u", "utmi-pads";
- resets = <&tegra_car 22>, <&tegra_car 22>;
+ resets = <&tegra_car 58>, <&tegra_car 22>;
reset-names = "usb", "utmi-pads";
nvidia,hssync-start-delay = <0>;
nvidia,idle-wait-delay = <17>;
@@ -874,7 +875,6 @@
nvidia,hssquelch-level = <2>;
nvidia,hsdiscon-level = <5>;
nvidia,xcvr-hsslew = <12>;
- nvidia,has-utmi-pad-registers;
status = "disabled";
};
@@ -899,7 +899,7 @@
<&tegra_car TEGRA124_CLK_PLL_U>,
<&tegra_car TEGRA124_CLK_USBD>;
clock-names = "reg", "pll_u", "utmi-pads";
- resets = <&tegra_car 58>, <&tegra_car 22>;
+ resets = <&tegra_car 59>, <&tegra_car 22>;
reset-names = "usb", "utmi-pads";
nvidia,hssync-start-delay = <0>;
nvidia,idle-wait-delay = <17>;
diff --git a/dts/src/arm/vexpress-v2p-ca15_a7.dts b/dts/src/arm/vexpress-v2p-ca15_a7.dts
index 7a2aeacd62..107395c32d 100644
--- a/dts/src/arm/vexpress-v2p-ca15_a7.dts
+++ b/dts/src/arm/vexpress-v2p-ca15_a7.dts
@@ -191,6 +191,7 @@
compatible = "arm,cortex-a15-pmu";
interrupts = <0 68 4>,
<0 69 4>;
+ interrupt-affinity = <&cpu0>, <&cpu1>;
};
oscclk6a: oscclk6a {
diff --git a/dts/src/arm/vexpress-v2p-ca9.dts b/dts/src/arm/vexpress-v2p-ca9.dts
index 23662b5a5e..d949facba3 100644
--- a/dts/src/arm/vexpress-v2p-ca9.dts
+++ b/dts/src/arm/vexpress-v2p-ca9.dts
@@ -33,28 +33,28 @@
#address-cells = <1>;
#size-cells = <0>;
- cpu@0 {
+ A9_0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0>;
next-level-cache = <&L2>;
};
- cpu@1 {
+ A9_1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <1>;
next-level-cache = <&L2>;
};
- cpu@2 {
+ A9_2: cpu@2 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <2>;
next-level-cache = <&L2>;
};
- cpu@3 {
+ A9_3: cpu@3 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <3>;
@@ -170,6 +170,7 @@
compatible = "arm,pl310-cache";
reg = <0x1e00a000 0x1000>;
interrupts = <0 43 4>;
+ cache-unified;
cache-level = <2>;
arm,data-latency = <1 1 1>;
arm,tag-latency = <1 1 1>;
@@ -181,6 +182,8 @@
<0 61 4>,
<0 62 4>,
<0 63 4>;
+ interrupt-affinity = <&A9_0>, <&A9_1>, <&A9_2>, <&A9_3>;
+
};
dcc {
diff --git a/dts/src/arm64/arm/juno-motherboard.dtsi b/dts/src/arm64/arm/juno-motherboard.dtsi
index c138b95a83..351c95bda8 100644
--- a/dts/src/arm64/arm/juno-motherboard.dtsi
+++ b/dts/src/arm64/arm/juno-motherboard.dtsi
@@ -21,6 +21,20 @@
clock-output-names = "juno_mb:clk25mhz";
};
+ v2m_refclk1mhz: refclk1mhz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <1000000>;
+ clock-output-names = "juno_mb:refclk1mhz";
+ };
+
+ v2m_refclk32khz: refclk32khz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-output-names = "juno_mb:refclk32khz";
+ };
+
motherboard {
compatible = "arm,vexpress,v2p-p1", "simple-bus";
#address-cells = <2>; /* SMB chipselect number and offset */
@@ -66,6 +80,15 @@
#size-cells = <1>;
ranges = <0 3 0 0x200000>;
+ v2m_sysctl: sysctl@020000 {
+ compatible = "arm,sp810", "arm,primecell";
+ reg = <0x020000 0x1000>;
+ clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&mb_clk24mhz>;
+ clock-names = "refclk", "timclk", "apb_pclk";
+ #clock-cells = <1>;
+ clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
+ };
+
mmci@050000 {
compatible = "arm,pl180", "arm,primecell";
reg = <0x050000 0x1000>;
@@ -106,16 +129,16 @@
compatible = "arm,sp804", "arm,primecell";
reg = <0x110000 0x10000>;
interrupts = <9>;
- clocks = <&mb_clk24mhz>, <&soc_smc50mhz>;
- clock-names = "timclken1", "apb_pclk";
+ clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&mb_clk24mhz>;
+ clock-names = "timclken1", "timclken2", "apb_pclk";
};
v2m_timer23: timer@120000 {
compatible = "arm,sp804", "arm,primecell";
reg = <0x120000 0x10000>;
interrupts = <9>;
- clocks = <&mb_clk24mhz>, <&soc_smc50mhz>;
- clock-names = "timclken1", "apb_pclk";
+ clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&mb_clk24mhz>;
+ clock-names = "timclken1", "timclken2", "apb_pclk";
};
rtc@170000 {
generated by cgit v1.2.3 (git 2.39.1) at 2024-04-18 05:38:01 +0000