summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--dts/Bindings/arm/adapteva.txt7
-rw-r--r--dts/Bindings/arm/arm-boards6
-rw-r--r--dts/Bindings/arm/armada-380-mpcore-soc-ctrl.txt14
-rw-r--r--dts/Bindings/arm/atmel-pmc.txt5
-rw-r--r--dts/Bindings/arm/bcm/brcm,bcm11351-cpu-method36
-rw-r--r--dts/Bindings/arm/brcm-brcmstb.txt95
-rw-r--r--dts/Bindings/arm/ccn.txt21
-rw-r--r--dts/Bindings/arm/cpu-enable-method/marvell,berlin-smp41
-rw-r--r--dts/Bindings/arm/cpus.txt4
-rw-r--r--dts/Bindings/arm/gic-v3.txt79
-rw-r--r--dts/Bindings/arm/gic.txt1
-rw-r--r--dts/Bindings/arm/hisilicon/hisilicon.txt11
-rw-r--r--dts/Bindings/arm/marvell,berlin.txt16
-rw-r--r--dts/Bindings/arm/mediatek.txt8
-rw-r--r--dts/Bindings/arm/omap/crossbar.txt36
-rw-r--r--dts/Bindings/arm/omap/omap.txt3
-rw-r--r--dts/Bindings/arm/omap/prcm.txt65
-rw-r--r--dts/Bindings/arm/samsung/exynos-adc.txt25
-rw-r--r--dts/Bindings/arm/samsung/pmu.txt32
-rw-r--r--dts/Bindings/arm/spear-misc.txt9
-rw-r--r--dts/Bindings/arm/tegra.txt2
-rw-r--r--dts/Bindings/arm/xilinx.txt8
-rw-r--r--dts/Bindings/ata/ahci-platform.txt45
-rw-r--r--dts/Bindings/ata/ahci-st.txt31
-rw-r--r--dts/Bindings/ata/imx-sata.txt36
-rw-r--r--dts/Bindings/ata/tegra-sata.txt30
-rw-r--r--dts/Bindings/clock/arm-integrator.txt4
-rw-r--r--dts/Bindings/clock/clk-palmas-clk32kg-clocks.txt35
-rw-r--r--dts/Bindings/clock/clk-s5pv210-audss.txt53
-rw-r--r--dts/Bindings/clock/clock-bindings.txt36
-rw-r--r--dts/Bindings/clock/clps711x-clock.txt19
-rw-r--r--dts/Bindings/clock/imx1-clock.txt26
-rw-r--r--dts/Bindings/clock/imx21-clock.txt28
-rw-r--r--dts/Bindings/clock/imx27-clock.txt127
-rw-r--r--dts/Bindings/clock/imx6q-clock.txt220
-rw-r--r--dts/Bindings/clock/mvebu-cpu-clock.txt5
-rw-r--r--dts/Bindings/clock/qcom,gcc.txt2
-rw-r--r--dts/Bindings/clock/qcom,mmcc.txt2
-rw-r--r--dts/Bindings/clock/rockchip,rk3188-cru.txt61
-rw-r--r--dts/Bindings/clock/rockchip,rk3288-cru.txt61
-rw-r--r--dts/Bindings/clock/rockchip.txt3
-rw-r--r--dts/Bindings/clock/samsung,s5pv210-clock.txt78
-rw-r--r--dts/Bindings/clock/st/st,clkgen-divmux.txt28
-rw-r--r--dts/Bindings/clock/st/st,clkgen-mux.txt6
-rw-r--r--dts/Bindings/clock/st/st,clkgen-pll.txt17
-rw-r--r--dts/Bindings/clock/st/st,clkgen-prediv.txt8
-rw-r--r--dts/Bindings/clock/st/st,clkgen-vcc.txt34
-rw-r--r--dts/Bindings/clock/st/st,clkgen.txt59
-rw-r--r--dts/Bindings/clock/st/st,flexgen.txt119
-rw-r--r--dts/Bindings/clock/st/st,quadfs.txt15
-rw-r--r--dts/Bindings/clock/sunxi.txt7
-rw-r--r--dts/Bindings/crypto/amd-ccp.txt19
-rw-r--r--dts/Bindings/crypto/qcom-qce.txt25
-rw-r--r--dts/Bindings/dma/fsl-imx-sdma.txt1
-rw-r--r--dts/Bindings/dma/mpc512x-dma.txt29
-rw-r--r--dts/Bindings/dma/nbpfaxi.txt61
-rw-r--r--dts/Bindings/dma/rcar-audmapp.txt29
-rw-r--r--dts/Bindings/dma/renesas,rcar-dmac.txt98
-rw-r--r--dts/Bindings/dma/ste-dma40.txt74
-rw-r--r--dts/Bindings/dma/sun6i-dma.txt45
-rw-r--r--dts/Bindings/drm/armada/marvell,dove-lcd.txt30
-rw-r--r--dts/Bindings/drm/i2c/tda998x.txt2
-rw-r--r--dts/Bindings/drm/msm/gpu.txt52
-rw-r--r--dts/Bindings/drm/msm/hdmi.txt46
-rw-r--r--dts/Bindings/drm/msm/mdp.txt48
-rw-r--r--dts/Bindings/extcon/extcon-sm5502.txt23
-rw-r--r--dts/Bindings/fuse/nvidia,tegra20-fuse.txt40
-rw-r--r--dts/Bindings/gpio/gpio-zynq.txt26
-rw-r--r--dts/Bindings/gpu/nvidia,gk20a.txt43
-rw-r--r--dts/Bindings/gpu/st,stih4xx.txt189
-rw-r--r--dts/Bindings/hwmon/ibmpowernv.txt23
-rw-r--r--dts/Bindings/hwmon/ntc_thermistor.txt1
-rw-r--r--dts/Bindings/hwmon/pwm-fan.txt12
-rw-r--r--dts/Bindings/i2c/i2c-efm32.txt4
-rw-r--r--dts/Bindings/i2c/trivial-devices.txt3
-rw-r--r--dts/Bindings/iio/adc/max1027-adc.txt22
-rw-r--r--dts/Bindings/iio/magnetometer/hmc5843.txt4
-rw-r--r--dts/Bindings/iio/st-sensors.txt54
-rw-r--r--dts/Bindings/input/atmel,maxtouch.txt25
-rw-r--r--dts/Bindings/input/cap1106.txt53
-rw-r--r--dts/Bindings/input/touchscreen/pixcir_i2c_ts.txt26
-rw-r--r--dts/Bindings/input/touchscreen/zforce_ts.txt4
-rw-r--r--dts/Bindings/interrupt-controller/atmel,aic.txt (renamed from dts/Bindings/arm/atmel-aic.txt)0
-rw-r--r--dts/Bindings/interrupt-controller/opencores,or1k-pic.txt23
-rw-r--r--dts/Bindings/iommu/arm,smmu.txt6
-rw-r--r--dts/Bindings/iommu/iommu.txt182
-rw-r--r--dts/Bindings/leds/pca963x.txt9
-rw-r--r--dts/Bindings/leds/tca6507.txt2
-rw-r--r--dts/Bindings/media/atmel-isi.txt51
-rw-r--r--dts/Bindings/media/exynos-jpeg-codec.txt12
-rw-r--r--dts/Bindings/media/i2c/mt9m111.txt28
-rw-r--r--dts/Bindings/media/pxa-camera.txt43
-rw-r--r--dts/Bindings/media/rcar_vin.txt86
-rw-r--r--dts/Bindings/media/sunxi-ir.txt23
-rw-r--r--dts/Bindings/mfd/arizona.txt10
-rw-r--r--dts/Bindings/mfd/as3722.txt8
-rw-r--r--dts/Bindings/mfd/palmas.txt2
-rw-r--r--dts/Bindings/mfd/s2mps11.txt11
-rw-r--r--dts/Bindings/mfd/sun6i-prcm.txt2
-rw-r--r--dts/Bindings/misc/nvidia,tegra20-apbmisc.txt13
-rw-r--r--dts/Bindings/mmc/exynos-dw-mshc.txt17
-rw-r--r--dts/Bindings/mmc/k3-dw-mshc.txt12
-rw-r--r--dts/Bindings/mmc/mmc.txt4
-rw-r--r--dts/Bindings/mmc/renesas,mmcif.txt32
-rw-r--r--dts/Bindings/mmc/sdhci-msm.txt8
-rw-r--r--dts/Bindings/mmc/sdhci-st.txt33
-rw-r--r--dts/Bindings/mmc/synopsys-dw-mshc.txt12
-rw-r--r--dts/Bindings/mmc/ti-omap-hsmmc.txt54
-rw-r--r--dts/Bindings/mmc/tmio_mmc.txt1
-rw-r--r--dts/Bindings/mtd/gpmi-nand.txt10
-rw-r--r--dts/Bindings/net/amd-xgbe-phy.txt6
-rw-r--r--dts/Bindings/net/amd-xgbe.txt17
-rw-r--r--dts/Bindings/net/apm-xgene-enet.txt66
-rw-r--r--dts/Bindings/net/broadcom-systemport.txt3
-rw-r--r--dts/Bindings/net/davinci-mdio.txt8
-rw-r--r--dts/Bindings/net/fsl-fec.txt29
-rw-r--r--dts/Bindings/net/ieee802154/cc2520.txt29
-rw-r--r--dts/Bindings/net/marvell-pp2.txt61
-rw-r--r--dts/Bindings/net/nfc/st21nfcb.txt33
-rw-r--r--dts/Bindings/net/sh_eth.txt1
-rw-r--r--dts/Bindings/net/stmmac.txt6
-rw-r--r--dts/Bindings/net/wireless/brcm,bcm43xx-fmac.txt41
-rw-r--r--dts/Bindings/panel/auo,b133htn01.txt7
-rw-r--r--dts/Bindings/panel/foxlink,fl500wvr00-a0t.txt7
-rw-r--r--dts/Bindings/panel/innolux,n116bge.txt7
-rw-r--r--dts/Bindings/panel/innolux,n156bge-l21.txt7
-rw-r--r--dts/Bindings/pci/nvidia,tegra20-pcie.txt30
-rw-r--r--dts/Bindings/pci/spear13xx-pcie.txt14
-rw-r--r--dts/Bindings/phy/berlin-sata-phy.txt34
-rw-r--r--dts/Bindings/phy/hix5hd2-phy.txt22
-rw-r--r--dts/Bindings/phy/phy-bindings.txt4
-rw-r--r--dts/Bindings/phy/phy-miphy365x.txt76
-rw-r--r--dts/Bindings/phy/qcom-apq8064-sata-phy.txt24
-rw-r--r--dts/Bindings/phy/qcom-ipq806x-sata-phy.txt23
-rw-r--r--dts/Bindings/phy/samsung-phy.txt3
-rw-r--r--dts/Bindings/phy/st-spear-miphy.txt15
-rw-r--r--dts/Bindings/phy/ti-phy.txt23
-rw-r--r--dts/Bindings/pinctrl/allwinner,sunxi-pinctrl.txt2
-rw-r--r--dts/Bindings/pinctrl/nvidia,tegra124-xusb-padctl.txt127
-rw-r--r--dts/Bindings/pinctrl/qcom,apq8064-pinctrl.txt2
-rw-r--r--dts/Bindings/pinctrl/qcom,ipq8064-pinctrl.txt2
-rw-r--r--dts/Bindings/pinctrl/qcom,msm8960-pinctrl.txt181
-rw-r--r--dts/Bindings/pinctrl/qcom,msm8974-pinctrl.txt2
-rw-r--r--dts/Bindings/pinctrl/renesas,pfc-pinctrl.txt1
-rw-r--r--dts/Bindings/pinctrl/rockchip,pinctrl.txt4
-rw-r--r--dts/Bindings/pinctrl/samsung-pinctrl.txt24
-rw-r--r--dts/Bindings/power/rx51-battery.txt25
-rw-r--r--dts/Bindings/powerpc/fsl/board.txt16
-rw-r--r--dts/Bindings/pwm/pwm-rockchip.txt20
-rw-r--r--dts/Bindings/pwm/pwm-st.txt41
-rw-r--r--dts/Bindings/regulator/act8865-regulator.txt7
-rw-r--r--dts/Bindings/regulator/palmas-pmic.txt1
-rw-r--r--dts/Bindings/regulator/s5m8767-regulator.txt2
-rw-r--r--dts/Bindings/regulator/tps65218.txt23
-rw-r--r--dts/Bindings/serial/cdns,uart.txt20
-rw-r--r--dts/Bindings/serial/efm32-uart.txt4
-rw-r--r--dts/Bindings/serial/fsl-lpuart.txt6
-rw-r--r--dts/Bindings/serial/samsung_uart.txt56
-rw-r--r--dts/Bindings/serial/snps-dw-apb-uart.txt32
-rw-r--r--dts/Bindings/sound/ak5386.txt4
-rw-r--r--dts/Bindings/sound/cs4265.txt29
-rw-r--r--dts/Bindings/sound/fsl,asrc.txt60
-rw-r--r--dts/Bindings/sound/max98090.txt2
-rw-r--r--dts/Bindings/sound/renesas,rsnd.txt9
-rw-r--r--dts/Bindings/sound/rockchip-i2s.txt37
-rw-r--r--dts/Bindings/sound/samsung,odroidx2-max98090.txt35
-rw-r--r--dts/Bindings/sound/sirf-usp.txt27
-rw-r--r--dts/Bindings/sound/snow.txt5
-rw-r--r--dts/Bindings/sound/tas2552.txt26
-rw-r--r--dts/Bindings/sound/ti,tas5086.txt5
-rw-r--r--dts/Bindings/sound/wm8904.txt33
-rw-r--r--dts/Bindings/spi/efm32-spi.txt13
-rw-r--r--dts/Bindings/spi/qcom,spi-qup.txt6
-rw-r--r--dts/Bindings/spi/snps,dw-apb-ssi.txt28
-rw-r--r--dts/Bindings/spi/spi-davinci.txt9
-rw-r--r--dts/Bindings/spi/spi-rockchip.txt37
-rw-r--r--dts/Bindings/spi/spi-samsung.txt27
-rw-r--r--dts/Bindings/thermal/exynos-thermal.txt1
-rw-r--r--dts/Bindings/thermal/rcar-thermal.txt18
-rw-r--r--dts/Bindings/thermal/st-thermal.txt42
-rw-r--r--dts/Bindings/timer/cirrus,clps711x-timer.txt29
-rw-r--r--dts/Bindings/timer/mediatek,mtk-timer.txt17
-rw-r--r--dts/Bindings/timer/renesas,cmt.txt47
-rw-r--r--dts/Bindings/timer/renesas,mtu2.txt39
-rw-r--r--dts/Bindings/timer/renesas,tmu.txt39
-rw-r--r--dts/Bindings/usb/ci-hdrc-imx.txt2
-rw-r--r--dts/Bindings/usb/nvidia,tegra20-usb-phy.txt8
-rw-r--r--dts/Bindings/usb/usb-xhci.txt3
-rw-r--r--dts/Bindings/vendor-prefixes.txt6
-rw-r--r--dts/Bindings/video/arm,pl11x.txt109
-rw-r--r--dts/Bindings/video/atmel,lcdc.txt1
-rw-r--r--dts/Bindings/video/cirrus,clps711x-fb.txt47
-rw-r--r--dts/Bindings/video/exynos_dsim.txt4
-rw-r--r--dts/Bindings/video/exynos_mixer.txt5
-rw-r--r--dts/Bindings/video/samsung-fimd.txt30
-rw-r--r--dts/Bindings/watchdog/fsl-imx-wdt.txt5
-rw-r--r--dts/include/dt-bindings/clock/clps711x-clock.h27
-rw-r--r--dts/include/dt-bindings/clock/exynos4.h25
-rw-r--r--dts/include/dt-bindings/clock/exynos5250.h2
-rw-r--r--dts/include/dt-bindings/clock/exynos5420.h2
-rw-r--r--dts/include/dt-bindings/clock/exynos5440.h2
-rw-r--r--dts/include/dt-bindings/clock/imx1-clock.h40
-rw-r--r--dts/include/dt-bindings/clock/imx21-clock.h80
-rw-r--r--dts/include/dt-bindings/clock/imx27-clock.h108
-rw-r--r--dts/include/dt-bindings/clock/imx6qdl-clock.h224
-rw-r--r--dts/include/dt-bindings/clock/qcom,gcc-apq8084.h351
-rw-r--r--dts/include/dt-bindings/clock/qcom,gcc-ipq806x.h293
-rw-r--r--dts/include/dt-bindings/clock/qcom,gcc-msm8960.h11
-rw-r--r--dts/include/dt-bindings/clock/qcom,mmcc-apq8084.h183
-rw-r--r--dts/include/dt-bindings/clock/qcom,mmcc-msm8960.h8
-rw-r--r--dts/include/dt-bindings/clock/r8a7790-clock.h27
-rw-r--r--dts/include/dt-bindings/clock/r8a7791-clock.h27
-rw-r--r--dts/include/dt-bindings/clock/rk3066a-cru.h35
-rw-r--r--dts/include/dt-bindings/clock/rk3188-cru-common.h249
-rw-r--r--dts/include/dt-bindings/clock/rk3188-cru.h51
-rw-r--r--dts/include/dt-bindings/clock/rk3288-cru.h278
-rw-r--r--dts/include/dt-bindings/clock/s5pv210-audss.h34
-rw-r--r--dts/include/dt-bindings/clock/s5pv210.h239
-rw-r--r--dts/include/dt-bindings/clock/vf610-clock.h4
-rw-r--r--dts/include/dt-bindings/dma/nbpfaxi.h20
-rw-r--r--dts/include/dt-bindings/mfd/as3722.h2
-rw-r--r--dts/include/dt-bindings/mfd/palmas.h18
-rw-r--r--dts/include/dt-bindings/phy/phy-miphy365x.h14
-rw-r--r--dts/include/dt-bindings/pinctrl/pinctrl-tegra-xusb.h7
-rw-r--r--dts/include/dt-bindings/reset/qcom,gcc-apq8084.h109
-rw-r--r--dts/include/dt-bindings/reset/qcom,gcc-ipq806x.h132
-rw-r--r--dts/include/dt-bindings/reset/qcom,gcc-msm8960.h16
-rw-r--r--dts/include/dt-bindings/reset/qcom,mmcc-apq8084.h64
-rw-r--r--dts/include/dt-bindings/reset/qcom,mmcc-msm8960.h8
-rw-r--r--dts/src/arc/angel4.dts2
-rw-r--r--dts/src/arm/aks-cdu.dts6
-rw-r--r--dts/src/arm/am335x-evmsk.dts105
-rw-r--r--dts/src/arm/am335x-pepper.dts653
-rw-r--r--dts/src/arm/am33xx.dtsi9
-rw-r--r--dts/src/arm/am4372.dtsi11
-rw-r--r--dts/src/arm/am437x-gp-evm.dts75
-rw-r--r--dts/src/arm/am437x-sk-evm.dts613
-rw-r--r--dts/src/arm/am43x-epos-evm.dts63
-rw-r--r--dts/src/arm/animeo_ip.dts8
-rw-r--r--dts/src/arm/armada-375-db.dts26
-rw-r--r--dts/src/arm/armada-375.dtsi34
-rw-r--r--dts/src/arm/armada-38x.dtsi5
-rw-r--r--dts/src/arm/armada-xp-lenovo-ix4-300d.dts284
-rw-r--r--dts/src/arm/armada-xp-mv78230.dtsi2
-rw-r--r--dts/src/arm/armada-xp-mv78260.dtsi2
-rw-r--r--dts/src/arm/armada-xp-mv78460.dtsi4
-rw-r--r--dts/src/arm/armada-xp.dtsi2
-rw-r--r--dts/src/arm/at91-ariag25.dts8
-rw-r--r--dts/src/arm/at91-cosino.dtsi8
-rw-r--r--dts/src/arm/at91-foxg20.dts8
-rw-r--r--dts/src/arm/at91-qil_a9260.dts8
-rw-r--r--dts/src/arm/at91-sama5d3_xplained.dts12
-rw-r--r--dts/src/arm/at91rm9200.dtsi304
-rw-r--r--dts/src/arm/at91rm9200ek.dts8
-rw-r--r--dts/src/arm/at91sam9260.dtsi314
-rw-r--r--dts/src/arm/at91sam9261.dtsi20
-rw-r--r--dts/src/arm/at91sam9261ek.dts16
-rw-r--r--dts/src/arm/at91sam9263.dtsi311
-rw-r--r--dts/src/arm/at91sam9263ek.dts8
-rw-r--r--dts/src/arm/at91sam9g20.dtsi24
-rw-r--r--dts/src/arm/at91sam9g20ek_common.dtsi8
-rw-r--r--dts/src/arm/at91sam9g45.dtsi342
-rw-r--r--dts/src/arm/at91sam9m10g45ek.dts8
-rw-r--r--dts/src/arm/at91sam9n12.dtsi20
-rw-r--r--dts/src/arm/at91sam9n12ek.dts18
-rw-r--r--dts/src/arm/at91sam9rl.dtsi32
-rw-r--r--dts/src/arm/at91sam9rlek.dts17
-rw-r--r--dts/src/arm/at91sam9x5.dtsi30
-rw-r--r--dts/src/arm/at91sam9x5cm.dtsi12
-rw-r--r--dts/src/arm/bcm11351.dtsi19
-rw-r--r--dts/src/arm/bcm21664.dtsi19
-rw-r--r--dts/src/arm/bcm7445-bcm97445svmb.dts14
-rw-r--r--dts/src/arm/bcm7445.dtsi111
-rw-r--r--dts/src/arm/berlin2.dtsi6
-rw-r--r--dts/src/arm/berlin2q-marvell-dmp.dts8
-rw-r--r--dts/src/arm/berlin2q.dtsi80
-rw-r--r--dts/src/arm/cros-ec-keyboard.dtsi105
-rw-r--r--dts/src/arm/dove-cubox-es.dts12
-rw-r--r--dts/src/arm/dove-cubox.dts3
-rw-r--r--dts/src/arm/dove.dtsi14
-rw-r--r--dts/src/arm/dra7-evm.dts8
-rw-r--r--dts/src/arm/dra7.dtsi382
-rw-r--r--dts/src/arm/dra7xx-clocks.dtsi39
-rw-r--r--dts/src/arm/emev2.dtsi2
-rw-r--r--dts/src/arm/ethernut5.dts10
-rw-r--r--dts/src/arm/evk-pro3.dts6
-rw-r--r--dts/src/arm/exynos3250.dtsi35
-rw-r--r--dts/src/arm/exynos4.dtsi43
-rw-r--r--dts/src/arm/exynos4210-smdkv310.dts2
-rw-r--r--dts/src/arm/exynos4210.dtsi16
-rw-r--r--dts/src/arm/exynos4412-odroid-common.dtsi371
-rw-r--r--dts/src/arm/exynos4412-odroidu3.dts61
-rw-r--r--dts/src/arm/exynos4412-odroidx.dts279
-rw-r--r--dts/src/arm/exynos4412-odroidx2.dts32
-rw-r--r--dts/src/arm/exynos4412-trats2.dts2
-rw-r--r--dts/src/arm/exynos4412.dtsi4
-rw-r--r--dts/src/arm/exynos4x12.dtsi13
-rw-r--r--dts/src/arm/exynos5.dtsi16
-rw-r--r--dts/src/arm/exynos5250-cros-common.dtsi159
-rw-r--r--dts/src/arm/exynos5250-smdk5250.dts4
-rw-r--r--dts/src/arm/exynos5250-snow.dts259
-rw-r--r--dts/src/arm/exynos5250.dtsi3
-rw-r--r--dts/src/arm/exynos5260.dtsi9
-rw-r--r--dts/src/arm/exynos5410.dtsi15
-rw-r--r--dts/src/arm/exynos5420-peach-pit.dts392
-rw-r--r--dts/src/arm/exynos5420.dtsi28
-rw-r--r--dts/src/arm/exynos5440.dtsi6
-rw-r--r--dts/src/arm/exynos5800-peach-pi.dts374
-rw-r--r--dts/src/arm/ge863-pro3.dtsi4
-rw-r--r--dts/src/arm/hi3620.dtsi1
-rw-r--r--dts/src/arm/hisi-x5hd2-dkb.dts53
-rw-r--r--dts/src/arm/hisi-x5hd2.dtsi170
-rw-r--r--dts/src/arm/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts73
-rw-r--r--dts/src/arm/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts45
-rw-r--r--dts/src/arm/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts45
-rw-r--r--dts/src/arm/imx25-eukrea-mbimxsd25-baseboard.dts1
-rw-r--r--dts/src/arm/imx25-pdk.dts8
-rw-r--r--dts/src/arm/imx25.dtsi8
-rw-r--r--dts/src/arm/imx27-eukrea-cpuimx27.dtsi296
-rw-r--r--dts/src/arm/imx27-eukrea-mbimxsd27-baseboard.dts273
-rw-r--r--dts/src/arm/imx27-pdk.dts2
-rw-r--r--dts/src/arm/imx27-phytec-phycore-rdk.dts2
-rw-r--r--dts/src/arm/imx27-phytec-phycore-som.dtsi3
-rw-r--r--dts/src/arm/imx27-pinfunc.h46
-rw-r--r--dts/src/arm/imx27.dtsi115
-rw-r--r--dts/src/arm/imx28-cfa10036.dts22
-rw-r--r--dts/src/arm/imx28-m28.dtsi87
-rw-r--r--dts/src/arm/imx28-m28evk.dts62
-rw-r--r--dts/src/arm/imx35-eukrea-mbimxsd35-baseboard.dts1
-rw-r--r--dts/src/arm/imx35.dtsi8
-rw-r--r--dts/src/arm/imx50.dtsi8
-rw-r--r--dts/src/arm/imx51-babbage.dts2
-rw-r--r--dts/src/arm/imx51-eukrea-mbimxsd51-baseboard.dts1
-rw-r--r--dts/src/arm/imx51.dtsi3
-rw-r--r--dts/src/arm/imx53-m53.dtsi140
-rw-r--r--dts/src/arm/imx53-m53evk.dts113
-rw-r--r--dts/src/arm/imx53-mba53.dts1
-rw-r--r--dts/src/arm/imx53-qsb-common.dtsi1
-rw-r--r--dts/src/arm/imx53-tx53.dtsi1
-rw-r--r--dts/src/arm/imx53-voipac-bsb.dts1
-rw-r--r--dts/src/arm/imx53.dtsi15
-rw-r--r--dts/src/arm/imx6dl-aristainetos_4.dts85
-rw-r--r--dts/src/arm/imx6dl-aristainetos_7.dts74
-rw-r--r--dts/src/arm/imx6dl-gw51xx.dts2
-rw-r--r--dts/src/arm/imx6dl-gw52xx.dts2
-rw-r--r--dts/src/arm/imx6dl-gw53xx.dts2
-rw-r--r--dts/src/arm/imx6dl-gw54xx.dts2
-rw-r--r--dts/src/arm/imx6dl-rex-basic.dts30
-rw-r--r--dts/src/arm/imx6dl-riotboard.dts33
-rw-r--r--dts/src/arm/imx6dl-tx6dl-comtft.dts103
-rw-r--r--dts/src/arm/imx6dl-tx6u-801x.dts177
-rw-r--r--dts/src/arm/imx6dl-tx6u-811x.dts150
-rw-r--r--dts/src/arm/imx6dl-wandboard-revb1.dts22
-rw-r--r--dts/src/arm/imx6dl-wandboard.dts2
-rw-r--r--dts/src/arm/imx6dl.dtsi17
-rw-r--r--dts/src/arm/imx6q-cubox-i.dts4
-rw-r--r--dts/src/arm/imx6q-dmo-edmqmx6.dts54
-rw-r--r--dts/src/arm/imx6q-gw51xx.dts2
-rw-r--r--dts/src/arm/imx6q-gw52xx.dts2
-rw-r--r--dts/src/arm/imx6q-gw53xx.dts2
-rw-r--r--dts/src/arm/imx6q-gw5400-a.dts5
-rw-r--r--dts/src/arm/imx6q-gw54xx.dts2
-rw-r--r--dts/src/arm/imx6q-rex-pro.dts34
-rw-r--r--dts/src/arm/imx6q-tx6q-1010-comtft.dts103
-rw-r--r--dts/src/arm/imx6q-tx6q-1010.dts177
-rw-r--r--dts/src/arm/imx6q-tx6q-1020-comtft.dts136
-rw-r--r--dts/src/arm/imx6q-tx6q-1020.dts210
-rw-r--r--dts/src/arm/imx6q-tx6q-1110.dts154
-rw-r--r--dts/src/arm/imx6q-udoo.dts32
-rw-r--r--dts/src/arm/imx6q-wandboard-revb1.dts26
-rw-r--r--dts/src/arm/imx6q-wandboard.dts2
-rw-r--r--dts/src/arm/imx6q.dtsi35
-rw-r--r--dts/src/arm/imx6qdl-aristainetos.dtsi418
-rw-r--r--dts/src/arm/imx6qdl-gw52xx.dtsi5
-rw-r--r--dts/src/arm/imx6qdl-gw53xx.dtsi5
-rw-r--r--dts/src/arm/imx6qdl-gw54xx.dtsi6
-rw-r--r--dts/src/arm/imx6qdl-nitrogen6x.dtsi1
-rw-r--r--dts/src/arm/imx6qdl-phytec-pfla02.dtsi1
-rw-r--r--dts/src/arm/imx6qdl-rex.dtsi357
-rw-r--r--dts/src/arm/imx6qdl-sabrelite.dtsi1
-rw-r--r--dts/src/arm/imx6qdl-sabresd.dtsi2
-rw-r--r--dts/src/arm/imx6qdl-tx6.dtsi696
-rw-r--r--dts/src/arm/imx6qdl-wandboard-revb1.dtsi42
-rw-r--r--dts/src/arm/imx6qdl-wandboard-revc1.dtsi41
-rw-r--r--dts/src/arm/imx6qdl-wandboard.dtsi22
-rw-r--r--dts/src/arm/imx6qdl.dtsi161
-rw-r--r--dts/src/arm/imx6sl-evk.dts17
-rw-r--r--dts/src/arm/imx6sl.dtsi12
-rw-r--r--dts/src/arm/imx6sx-pinfunc.h1544
-rw-r--r--dts/src/arm/imx6sx-sdb.dts479
-rw-r--r--dts/src/arm/imx6sx.dtsi1208
-rw-r--r--dts/src/arm/integratorap.dts1
-rw-r--r--dts/src/arm/k2e-clocks.dtsi2
-rw-r--r--dts/src/arm/k2hk-clocks.dtsi2
-rw-r--r--dts/src/arm/k2hk-evm.dts12
-rw-r--r--dts/src/arm/k2l-clocks.dtsi2
-rw-r--r--dts/src/arm/keystone-clocks.dtsi2
-rw-r--r--dts/src/arm/keystone.dtsi11
-rw-r--r--dts/src/arm/kirkwood-d2net.dts42
-rw-r--r--dts/src/arm/kirkwood-net2big.dts60
-rw-r--r--dts/src/arm/kirkwood-net5big.dts111
-rw-r--r--dts/src/arm/kirkwood-netxbig.dtsi154
-rw-r--r--dts/src/arm/kizbox.dts4
-rw-r--r--dts/src/arm/mpa1600.dts8
-rw-r--r--dts/src/arm/mt6589-aquaris5.dts25
-rw-r--r--dts/src/arm/mt6589.dtsi94
-rw-r--r--dts/src/arm/omap2420.dtsi5
-rw-r--r--dts/src/arm/omap2430.dtsi5
-rw-r--r--dts/src/arm/omap3.dtsi2
-rw-r--r--dts/src/arm/omap4.dtsi9
-rw-r--r--dts/src/arm/omap5-uevm.dts68
-rw-r--r--dts/src/arm/omap5.dtsi62
-rw-r--r--dts/src/arm/pm9g45.dts8
-rw-r--r--dts/src/arm/r7s72100-genmai.dts10
-rw-r--r--dts/src/arm/r7s72100.dtsi1
-rw-r--r--dts/src/arm/r8a73a4-ape6evm-reference.dts14
-rw-r--r--dts/src/arm/r8a73a4.dtsi42
-rw-r--r--dts/src/arm/r8a7740-armadillo800eva-reference.dts28
-rw-r--r--dts/src/arm/r8a7740.dtsi63
-rw-r--r--dts/src/arm/r8a7778-bockw-reference.dts14
-rw-r--r--dts/src/arm/r8a7778.dtsi42
-rw-r--r--dts/src/arm/r8a7779-marzen-reference.dts121
-rw-r--r--dts/src/arm/r8a7779-marzen.dts116
-rw-r--r--dts/src/arm/r8a7779.dtsi234
-rw-r--r--dts/src/arm/r8a7790-lager.dts88
-rw-r--r--dts/src/arm/r8a7790.dtsi207
-rw-r--r--dts/src/arm/r8a7791-henninger.dts45
-rw-r--r--dts/src/arm/r8a7791-koelsch.dts89
-rw-r--r--dts/src/arm/r8a7791.dtsi218
-rw-r--r--dts/src/arm/rk3066a-bqcurie2.dts214
-rw-r--r--dts/src/arm/rk3066a-clocks.dtsi299
-rw-r--r--dts/src/arm/rk3066a.dtsi519
-rw-r--r--dts/src/arm/rk3188-clocks.dtsi289
-rw-r--r--dts/src/arm/rk3188-radxarock.dts218
-rw-r--r--dts/src/arm/rk3188.dtsi446
-rw-r--r--dts/src/arm/rk3288-evb-act8846.dts134
-rw-r--r--dts/src/arm/rk3288-evb-rk808.dts18
-rw-r--r--dts/src/arm/rk3288-evb.dtsi96
-rw-r--r--dts/src/arm/rk3288.dtsi595
-rw-r--r--dts/src/arm/rk3xxx.dtsi356
-rw-r--r--dts/src/arm/s3c2416.dtsi6
-rw-r--r--dts/src/arm/s3c24xx.dtsi9
-rw-r--r--dts/src/arm/s3c64xx.dtsi4
-rw-r--r--dts/src/arm/s5pv210-aquila.dts392
-rw-r--r--dts/src/arm/s5pv210-goni.dts449
-rw-r--r--dts/src/arm/s5pv210-pinctrl.dtsi839
-rw-r--r--dts/src/arm/s5pv210-smdkc110.dts78
-rw-r--r--dts/src/arm/s5pv210-smdkv210.dts238
-rw-r--r--dts/src/arm/s5pv210-torbreck.dts92
-rw-r--r--dts/src/arm/s5pv210.dtsi633
-rw-r--r--dts/src/arm/sama5d3.dtsi22
-rw-r--r--dts/src/arm/sama5d3_gmac.dtsi2
-rw-r--r--dts/src/arm/sama5d3xcm.dtsi12
-rw-r--r--dts/src/arm/sama5d3xmb.dtsi2
-rw-r--r--dts/src/arm/sh73a0-kzm9g-reference.dts16
-rw-r--r--dts/src/arm/sh73a0.dtsi72
-rw-r--r--dts/src/arm/socfpga.dtsi5
-rw-r--r--dts/src/arm/spear1310-evb.dts4
-rw-r--r--dts/src/arm/spear1310.dtsi93
-rw-r--r--dts/src/arm/spear1340-evb.dts4
-rw-r--r--dts/src/arm/spear1340.dtsi30
-rw-r--r--dts/src/arm/spear13xx.dtsi9
-rw-r--r--dts/src/arm/ste-dbx5x0.dtsi10
-rw-r--r--dts/src/arm/ste-href-stuib.dtsi2
-rw-r--r--dts/src/arm/ste-href-tvk1281618.dtsi59
-rw-r--r--dts/src/arm/ste-hrefv60plus.dtsi24
-rw-r--r--dts/src/arm/ste-snowball.dts38
-rw-r--r--dts/src/arm/sun4i-a10-a1000.dts15
-rw-r--r--dts/src/arm/sun4i-a10-ba10-tvbox.dts110
-rw-r--r--dts/src/arm/sun4i-a10-cubieboard.dts15
-rw-r--r--dts/src/arm/sun4i-a10-hackberry.dts21
-rw-r--r--dts/src/arm/sun4i-a10-inet97fv2.dts21
-rw-r--r--dts/src/arm/sun4i-a10-mini-xplus.dts28
-rw-r--r--dts/src/arm/sun4i-a10-olinuxino-lime.dts15
-rw-r--r--dts/src/arm/sun4i-a10-pcduino.dts9
-rw-r--r--dts/src/arm/sun4i-a10.dtsi34
-rw-r--r--dts/src/arm/sun5i-a10s.dtsi2
-rw-r--r--dts/src/arm/sun5i-a13.dtsi2
-rw-r--r--dts/src/arm/sun6i-a31-hummingbird.dts119
-rw-r--r--dts/src/arm/sun6i-a31.dtsi92
-rw-r--r--dts/src/arm/sun7i-a20-cubieboard2.dts16
-rw-r--r--dts/src/arm/sun7i-a20-cubietruck.dts16
-rw-r--r--dts/src/arm/sun7i-a20-i12-tvbox.dts22
-rw-r--r--dts/src/arm/sun7i-a20-olinuxino-micro.dts10
-rw-r--r--dts/src/arm/sun7i-a20-pcduino3.dts173
-rw-r--r--dts/src/arm/sun7i-a20.dtsi34
-rw-r--r--dts/src/arm/sun8i-a23-ippo-q8h-v5.dts30
-rw-r--r--dts/src/arm/sun8i-a23.dtsi343
-rw-r--r--dts/src/arm/tegra114-roth.dts32
-rw-r--r--dts/src/arm/tegra114.dtsi20
-rw-r--r--dts/src/arm/tegra124-jetson-tk1.dts33
-rw-r--r--dts/src/arm/tegra124-venice2.dts128
-rw-r--r--dts/src/arm/tegra124.dtsi62
-rw-r--r--dts/src/arm/tegra20-harmony.dts8
-rw-r--r--dts/src/arm/tegra20-medcom-wide.dts61
-rw-r--r--dts/src/arm/tegra20-paz00.dts6
-rw-r--r--dts/src/arm/tegra20-plutux.dts41
-rw-r--r--dts/src/arm/tegra20-tamonten.dtsi17
-rw-r--r--dts/src/arm/tegra20-tec.dts41
-rw-r--r--dts/src/arm/tegra20-trimslice.dts8
-rw-r--r--dts/src/arm/tegra20.dtsi22
-rw-r--r--dts/src/arm/tegra30-apalis-eval.dts260
-rw-r--r--dts/src/arm/tegra30-apalis.dtsi678
-rw-r--r--dts/src/arm/tegra30-beaver.dts12
-rw-r--r--dts/src/arm/tegra30-cardhu.dtsi11
-rw-r--r--dts/src/arm/tegra30.dtsi22
-rw-r--r--dts/src/arm/tny_a9260_common.dtsi8
-rw-r--r--dts/src/arm/tny_a9263.dts8
-rw-r--r--dts/src/arm/usb_a9260_common.dtsi8
-rw-r--r--dts/src/arm/usb_a9263.dts8
-rw-r--r--dts/src/arm/versatile-ab.dts85
-rw-r--r--dts/src/arm/versatile-pb.dts14
-rw-r--r--dts/src/arm/vf610.dtsi25
-rw-r--r--dts/src/arm/zynq-7000.dtsi90
-rw-r--r--dts/src/arm/zynq-parallella.dts64
-rw-r--r--dts/src/arm/zynq-zc702.dts4
-rw-r--r--dts/src/arm64/apm-mustang.dts4
-rw-r--r--dts/src/arm64/apm-storm.dtsi30
-rw-r--r--dts/src/powerpc/fsl/p2041si-post.dtsi1
-rw-r--r--dts/src/powerpc/fsl/qoriq-sec6.0-0.dtsi3
-rw-r--r--dts/src/powerpc/fsl/t2080si-post.dtsi69
-rw-r--r--dts/src/powerpc/fsl/t2081si-post.dtsi435
-rw-r--r--dts/src/powerpc/fsl/t208xsi-pre.dtsi99
-rw-r--r--dts/src/powerpc/fsl/t4240si-post.dtsi1
-rw-r--r--dts/src/powerpc/fsl/t4240si-pre.dtsi1
-rw-r--r--dts/src/powerpc/mpc5121.dtsi1
-rw-r--r--dts/src/powerpc/t2080qds.dts57
-rw-r--r--dts/src/powerpc/t2080rdb.dts57
-rw-r--r--dts/src/powerpc/t2081qds.dts46
-rw-r--r--dts/src/powerpc/t208xqds.dtsi239
-rw-r--r--dts/src/powerpc/t208xrdb.dtsi184
-rw-r--r--dts/src/powerpc/t4240rdb.dts186
-rw-r--r--dts/testcase-data/testcases.dts15
-rw-r--r--dts/testcase-data/testcases.dtsi4
534 files changed, 32217 insertions, 3430 deletions
diff --git a/dts/Bindings/arm/adapteva.txt b/dts/Bindings/arm/adapteva.txt
new file mode 100644
index 0000000000..1d8af9e360
--- /dev/null
+++ b/dts/Bindings/arm/adapteva.txt
@@ -0,0 +1,7 @@
+Adapteva Platforms Device Tree Bindings
+---------------------------------------
+
+Parallella board
+
+Required root node properties:
+ - compatible = "adapteva,parallella";
diff --git a/dts/Bindings/arm/arm-boards b/dts/Bindings/arm/arm-boards
index 3509707f93..c554ed3d44 100644
--- a/dts/Bindings/arm/arm-boards
+++ b/dts/Bindings/arm/arm-boards
@@ -86,3 +86,9 @@ Interrupt controllers:
compatible = "arm,versatile-sic";
interrupt-controller;
#interrupt-cells = <1>;
+
+Required nodes:
+
+- core-module: the root node to the Versatile platforms must have
+ a core-module with regs and the compatible strings
+ "arm,core-module-versatile", "syscon"
diff --git a/dts/Bindings/arm/armada-380-mpcore-soc-ctrl.txt b/dts/Bindings/arm/armada-380-mpcore-soc-ctrl.txt
new file mode 100644
index 0000000000..8781073029
--- /dev/null
+++ b/dts/Bindings/arm/armada-380-mpcore-soc-ctrl.txt
@@ -0,0 +1,14 @@
+Marvell Armada 38x CA9 MPcore SoC Controller
+============================================
+
+Required properties:
+
+- compatible: Should be "marvell,armada-380-mpcore-soc-ctrl".
+
+- reg: should be the register base and length as documented in the
+ datasheet for the CA9 MPcore SoC Control registers
+
+mpcore-soc-ctrl@20d20 {
+ compatible = "marvell,armada-380-mpcore-soc-ctrl";
+ reg = <0x20d20 0x6c>;
+};
diff --git a/dts/Bindings/arm/atmel-pmc.txt b/dts/Bindings/arm/atmel-pmc.txt
index 389bed5056..795cc78543 100644
--- a/dts/Bindings/arm/atmel-pmc.txt
+++ b/dts/Bindings/arm/atmel-pmc.txt
@@ -1,7 +1,10 @@
* Power Management Controller (PMC)
Required properties:
-- compatible: Should be "atmel,at91rm9200-pmc"
+- compatible: Should be "atmel,<chip>-pmc".
+ <chip> can be: at91rm9200, at91sam9260, at91sam9g45, at91sam9n12,
+ at91sam9x5, sama5d3
+
- reg: Should contain PMC registers location and length
Examples:
diff --git a/dts/Bindings/arm/bcm/brcm,bcm11351-cpu-method b/dts/Bindings/arm/bcm/brcm,bcm11351-cpu-method
new file mode 100644
index 0000000000..8240c023e2
--- /dev/null
+++ b/dts/Bindings/arm/bcm/brcm,bcm11351-cpu-method
@@ -0,0 +1,36 @@
+Broadcom Kona Family CPU Enable Method
+--------------------------------------
+This binding defines the enable method used for starting secondary
+CPUs in the following Broadcom SoCs:
+ BCM11130, BCM11140, BCM11351, BCM28145, BCM28155, BCM21664
+
+The enable method is specified by defining the following required
+properties in the "cpus" device tree node:
+ - enable-method = "brcm,bcm11351-cpu-method";
+ - secondary-boot-reg = <...>;
+
+The secondary-boot-reg property is a u32 value that specifies the
+physical address of the register used to request the ROM holding pen
+code release a secondary CPU. The value written to the register is
+formed by encoding the target CPU id into the low bits of the
+physical start address it should jump to.
+
+Example:
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ enable-method = "brcm,bcm11351-cpu-method";
+ secondary-boot-reg = <0x3500417c>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0>;
+ };
+
+ cpu1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <1>;
+ };
+ };
diff --git a/dts/Bindings/arm/brcm-brcmstb.txt b/dts/Bindings/arm/brcm-brcmstb.txt
new file mode 100644
index 0000000000..3c436cc4f3
--- /dev/null
+++ b/dts/Bindings/arm/brcm-brcmstb.txt
@@ -0,0 +1,95 @@
+ARM Broadcom STB platforms Device Tree Bindings
+-----------------------------------------------
+Boards with Broadcom Brahma15 ARM-based BCMxxxx (generally BCM7xxx variants)
+SoC shall have the following DT organization:
+
+Required root node properties:
+ - compatible: "brcm,bcm<chip_id>", "brcm,brcmstb"
+
+example:
+/ {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ model = "Broadcom STB (bcm7445)";
+ compatible = "brcm,bcm7445", "brcm,brcmstb";
+
+Further, syscon nodes that map platform-specific registers used for general
+system control is required:
+
+ - compatible: "brcm,bcm<chip_id>-sun-top-ctrl", "syscon"
+ - compatible: "brcm,bcm<chip_id>-hif-cpubiuctrl", "syscon"
+ - compatible: "brcm,bcm<chip_id>-hif-continuation", "syscon"
+
+example:
+ rdb {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges = <0 0x00 0xf0000000 0x1000000>;
+
+ sun_top_ctrl: syscon@404000 {
+ compatible = "brcm,bcm7445-sun-top-ctrl", "syscon";
+ reg = <0x404000 0x51c>;
+ };
+
+ hif_cpubiuctrl: syscon@3e2400 {
+ compatible = "brcm,bcm7445-hif-cpubiuctrl", "syscon";
+ reg = <0x3e2400 0x5b4>;
+ };
+
+ hif_continuation: syscon@452000 {
+ compatible = "brcm,bcm7445-hif-continuation", "syscon";
+ reg = <0x452000 0x100>;
+ };
+ };
+
+Lastly, nodes that allow for support of SMP initialization and reboot are
+required:
+
+smpboot
+-------
+Required properties:
+
+ - compatible
+ The string "brcm,brcmstb-smpboot".
+
+ - syscon-cpu
+ A phandle / integer array property which lets the BSP know the location
+ of certain CPU power-on registers.
+
+ The layout of the property is as follows:
+ o a phandle to the "hif_cpubiuctrl" syscon node
+ o offset to the base CPU power zone register
+ o offset to the base CPU reset register
+
+ - syscon-cont
+ A phandle pointing to the syscon node which describes the CPU boot
+ continuation registers.
+ o a phandle to the "hif_continuation" syscon node
+
+example:
+ smpboot {
+ compatible = "brcm,brcmstb-smpboot";
+ syscon-cpu = <&hif_cpubiuctrl 0x88 0x178>;
+ syscon-cont = <&hif_continuation>;
+ };
+
+reboot
+-------
+Required properties
+
+ - compatible
+ The string property "brcm,brcmstb-reboot".
+
+ - syscon
+ A phandle / integer array that points to the syscon node which describes
+ the general system reset registers.
+ o a phandle to "sun_top_ctrl"
+ o offset to the "reset source enable" register
+ o offset to the "software master reset" register
+
+example:
+ reboot {
+ compatible = "brcm,brcmstb-reboot";
+ syscon = <&sun_top_ctrl 0x304 0x308>;
+ };
diff --git a/dts/Bindings/arm/ccn.txt b/dts/Bindings/arm/ccn.txt
new file mode 100644
index 0000000000..b100d3847d
--- /dev/null
+++ b/dts/Bindings/arm/ccn.txt
@@ -0,0 +1,21 @@
+* ARM CCN (Cache Coherent Network)
+
+Required properties:
+
+- compatible: (standard compatible string) should be one of:
+ "arm,ccn-504"
+ "arm,ccn-508"
+
+- reg: (standard registers property) physical address and size
+ (16MB) of the configuration registers block
+
+- interrupts: (standard interrupt property) single interrupt
+ generated by the control block
+
+Example:
+
+ ccn@0x2000000000 {
+ compatible = "arm,ccn-504";
+ reg = <0x20 0x00000000 0 0x1000000>;
+ interrupts = <0 181 4>;
+ };
diff --git a/dts/Bindings/arm/cpu-enable-method/marvell,berlin-smp b/dts/Bindings/arm/cpu-enable-method/marvell,berlin-smp
new file mode 100644
index 0000000000..cd236b727e
--- /dev/null
+++ b/dts/Bindings/arm/cpu-enable-method/marvell,berlin-smp
@@ -0,0 +1,41 @@
+========================================================
+Secondary CPU enable-method "marvell,berlin-smp" binding
+========================================================
+
+This document describes the "marvell,berlin-smp" method for enabling secondary
+CPUs. To apply to all CPUs, a single "marvell,berlin-smp" enable method should
+be defined in the "cpus" node.
+
+Enable method name: "marvell,berlin-smp"
+Compatible machines: "marvell,berlin2" and "marvell,berlin2q"
+Compatible CPUs: "marvell,pj4b" and "arm,cortex-a9"
+Related properties: (none)
+
+Note:
+This enable method needs valid nodes compatible with "arm,cortex-a9-scu" and
+"marvell,berlin-cpu-ctrl"[1].
+
+Example:
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ enable-method = "marvell,berlin-smp";
+
+ cpu@0 {
+ compatible = "marvell,pj4b";
+ device_type = "cpu";
+ next-level-cache = <&l2>;
+ reg = <0>;
+ };
+
+ cpu@1 {
+ compatible = "marvell,pj4b";
+ device_type = "cpu";
+ next-level-cache = <&l2>;
+ reg = <1>;
+ };
+ };
+
+--
+[1] arm/marvell,berlin.txt
diff --git a/dts/Bindings/arm/cpus.txt b/dts/Bindings/arm/cpus.txt
index 1fe72a0778..298e2f6b33 100644
--- a/dts/Bindings/arm/cpus.txt
+++ b/dts/Bindings/arm/cpus.txt
@@ -152,7 +152,9 @@ nodes to be present and contain the properties described below.
"arm,cortex-a7"
"arm,cortex-a8"
"arm,cortex-a9"
+ "arm,cortex-a12"
"arm,cortex-a15"
+ "arm,cortex-a17"
"arm,cortex-a53"
"arm,cortex-a57"
"arm,cortex-m0"
@@ -163,6 +165,7 @@ nodes to be present and contain the properties described below.
"arm,cortex-r4"
"arm,cortex-r5"
"arm,cortex-r7"
+ "brcm,brahma-b15"
"faraday,fa526"
"intel,sa110"
"intel,sa1100"
@@ -184,6 +187,7 @@ nodes to be present and contain the properties described below.
can be one of:
"allwinner,sun6i-a31"
"arm,psci"
+ "brcm,brahma-b15"
"marvell,armada-375-smp"
"marvell,armada-380-smp"
"marvell,armada-xp-smp"
diff --git a/dts/Bindings/arm/gic-v3.txt b/dts/Bindings/arm/gic-v3.txt
new file mode 100644
index 0000000000..33cd05e6c1
--- /dev/null
+++ b/dts/Bindings/arm/gic-v3.txt
@@ -0,0 +1,79 @@
+* ARM Generic Interrupt Controller, version 3
+
+AArch64 SMP cores are often associated with a GICv3, providing Private
+Peripheral Interrupts (PPI), Shared Peripheral Interrupts (SPI),
+Software Generated Interrupts (SGI), and Locality-specific Peripheral
+Interrupts (LPI).
+
+Main node required properties:
+
+- compatible : should at least contain "arm,gic-v3".
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode an
+ interrupt source. Must be a single cell with a value of at least 3.
+
+ The 1st cell is the interrupt type; 0 for SPI interrupts, 1 for PPI
+ interrupts. Other values are reserved for future use.
+
+ The 2nd cell contains the interrupt number for the interrupt type.
+ SPI interrupts are in the range [0-987]. PPI interrupts are in the
+ range [0-15].
+
+ The 3rd cell is the flags, encoded as follows:
+ bits[3:0] trigger type and level flags.
+ 1 = edge triggered
+ 4 = level triggered
+
+ Cells 4 and beyond are reserved for future use. When the 1st cell
+ has a value of 0 or 1, cells 4 and beyond act as padding, and may be
+ ignored. It is recommended that padding cells have a value of 0.
+
+- reg : Specifies base physical address(s) and size of the GIC
+ registers, in the following order:
+ - GIC Distributor interface (GICD)
+ - GIC Redistributors (GICR), one range per redistributor region
+ - GIC CPU interface (GICC)
+ - GIC Hypervisor interface (GICH)
+ - GIC Virtual CPU interface (GICV)
+
+ GICC, GICH and GICV are optional.
+
+- interrupts : Interrupt source of the VGIC maintenance interrupt.
+
+Optional
+
+- redistributor-stride : If using padding pages, specifies the stride
+ of consecutive redistributors. Must be a multiple of 64kB.
+
+- #redistributor-regions: The number of independent contiguous regions
+ occupied by the redistributors. Required if more than one such
+ region is present.
+
+Examples:
+
+ gic: interrupt-controller@2cf00000 {
+ compatible = "arm,gic-v3";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0x0 0x2f000000 0 0x10000>, // GICD
+ <0x0 0x2f100000 0 0x200000>, // GICR
+ <0x0 0x2c000000 0 0x2000>, // GICC
+ <0x0 0x2c010000 0 0x2000>, // GICH
+ <0x0 0x2c020000 0 0x2000>; // GICV
+ interrupts = <1 9 4>;
+ };
+
+ gic: interrupt-controller@2c010000 {
+ compatible = "arm,gic-v3";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ redistributor-stride = <0x0 0x40000>; // 256kB stride
+ #redistributor-regions = <2>;
+ reg = <0x0 0x2c010000 0 0x10000>, // GICD
+ <0x0 0x2d000000 0 0x800000>, // GICR 1: CPUs 0-31
+ <0x0 0x2e000000 0 0x800000>; // GICR 2: CPUs 32-63
+ <0x0 0x2c040000 0 0x2000>, // GICC
+ <0x0 0x2c060000 0 0x2000>, // GICH
+ <0x0 0x2c080000 0 0x2000>; // GICV
+ interrupts = <1 9 4>;
+ };
diff --git a/dts/Bindings/arm/gic.txt b/dts/Bindings/arm/gic.txt
index 5573c08d31..c7d2fa1566 100644
--- a/dts/Bindings/arm/gic.txt
+++ b/dts/Bindings/arm/gic.txt
@@ -16,6 +16,7 @@ Main node required properties:
"arm,cortex-a9-gic"
"arm,cortex-a7-gic"
"arm,arm11mp-gic"
+ "brcm,brahma-b15-gic"
- interrupt-controller : Identifies the node as an interrupt controller
- #interrupt-cells : Specifies the number of cells needed to encode an
interrupt source. The type shall be a <u32> and the value shall be 3.
diff --git a/dts/Bindings/arm/hisilicon/hisilicon.txt b/dts/Bindings/arm/hisilicon/hisilicon.txt
index df0a452b85..934f00025c 100644
--- a/dts/Bindings/arm/hisilicon/hisilicon.txt
+++ b/dts/Bindings/arm/hisilicon/hisilicon.txt
@@ -31,6 +31,17 @@ Example:
reboot-offset = <0x4>;
};
+-----------------------------------------------------------------------
+Hisilicon CPU controller
+
+Required properties:
+- compatible : "hisilicon,cpuctrl"
+- reg : Register address and size
+
+The clock registers and power registers of secondary cores are defined
+in CPU controller, especially in HIX5HD2 SoC.
+
+-----------------------------------------------------------------------
PCTRL: Peripheral misc control register
Required Properties:
diff --git a/dts/Bindings/arm/marvell,berlin.txt b/dts/Bindings/arm/marvell,berlin.txt
index 94013a9a87..904de5781f 100644
--- a/dts/Bindings/arm/marvell,berlin.txt
+++ b/dts/Bindings/arm/marvell,berlin.txt
@@ -24,6 +24,22 @@ SoC and board used. Currently known SoC compatibles are:
...
}
+* Marvell Berlin CPU control bindings
+
+CPU control register allows various operations on CPUs, like resetting them
+independently.
+
+Required properties:
+- compatible: should be "marvell,berlin-cpu-ctrl"
+- reg: address and length of the register set
+
+Example:
+
+cpu-ctrl@f7dd0000 {
+ compatible = "marvell,berlin-cpu-ctrl";
+ reg = <0xf7dd0000 0x10000>;
+};
+
* Marvell Berlin2 chip control binding
Marvell Berlin SoCs have a chip control register set providing several
diff --git a/dts/Bindings/arm/mediatek.txt b/dts/Bindings/arm/mediatek.txt
new file mode 100644
index 0000000000..d6ac71f373
--- /dev/null
+++ b/dts/Bindings/arm/mediatek.txt
@@ -0,0 +1,8 @@
+Mediatek MT6589 Platforms Device Tree Bindings
+
+Boards with a SoC of the Mediatek MT6589 shall have the following property:
+
+Required root node property:
+
+compatible: must contain "mediatek,mt6589"
+
diff --git a/dts/Bindings/arm/omap/crossbar.txt b/dts/Bindings/arm/omap/crossbar.txt
index fb88585cfb..4139db353d 100644
--- a/dts/Bindings/arm/omap/crossbar.txt
+++ b/dts/Bindings/arm/omap/crossbar.txt
@@ -10,6 +10,7 @@ Required properties:
- compatible : Should be "ti,irq-crossbar"
- reg: Base address and the size of the crossbar registers.
- ti,max-irqs: Total number of irqs available at the interrupt controller.
+- ti,max-crossbar-sources: Maximum number of crossbar sources that can be routed.
- ti,reg-size: Size of a individual register in bytes. Every individual
register is assumed to be of same size. Valid sizes are 1, 2, 4.
- ti,irqs-reserved: List of the reserved irq lines that are not muxed using
@@ -17,11 +18,46 @@ Required properties:
so crossbar bar driver should not consider them as free
lines.
+Optional properties:
+- ti,irqs-skip: This is similar to "ti,irqs-reserved", but these are for
+ SOC-specific hard-wiring of those irqs which unexpectedly bypasses the
+ crossbar. These irqs have a crossbar register, but still cannot be used.
+
+- ti,irqs-safe-map: integer which maps to a safe configuration to use
+ when the interrupt controller irq is unused (when not provided, default is 0)
+
Examples:
crossbar_mpu: @4a020000 {
compatible = "ti,irq-crossbar";
reg = <0x4a002a48 0x130>;
ti,max-irqs = <160>;
+ ti,max-crossbar-sources = <400>;
ti,reg-size = <2>;
ti,irqs-reserved = <0 1 2 3 5 6 131 132 139 140>;
+ ti,irqs-skip = <10 133 139 140>;
};
+
+Consumer:
+========
+See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt and
+Documentation/devicetree/bindings/arm/gic.txt for further details.
+
+An interrupt consumer on an SoC using crossbar will use:
+ interrupts = <GIC_SPI request_number interrupt_level>
+When the request number is between 0 to that described by
+"ti,max-crossbar-sources", it is assumed to be a crossbar mapping. If the
+request_number is greater than "ti,max-crossbar-sources", then it is mapped as a
+quirky hardware mapping direct to GIC.
+
+Example:
+ device_x@0x4a023000 {
+ /* Crossbar 8 used */
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+ ...
+ };
+
+ device_y@0x4a033000 {
+ /* Direct mapped GIC SPI 1 used */
+ interrupts = <GIC_SPI DIRECT_IRQ(1) IRQ_TYPE_LEVEL_HIGH>;
+ ...
+ };
diff --git a/dts/Bindings/arm/omap/omap.txt b/dts/Bindings/arm/omap/omap.txt
index d22b216f5d..0edc90305d 100644
--- a/dts/Bindings/arm/omap/omap.txt
+++ b/dts/Bindings/arm/omap/omap.txt
@@ -129,6 +129,9 @@ Boards:
- AM437x GP EVM
compatible = "ti,am437x-gp-evm", "ti,am4372", "ti,am43"
+- AM437x SK EVM: AM437x StarterKit Evaluation Module
+ compatible = "ti,am437x-sk-evm", "ti,am4372", "ti,am43"
+
- DRA742 EVM: Software Development Board for DRA742
compatible = "ti,dra7-evm", "ti,dra742", "ti,dra74", "ti,dra7"
diff --git a/dts/Bindings/arm/omap/prcm.txt b/dts/Bindings/arm/omap/prcm.txt
new file mode 100644
index 0000000000..79074dac68
--- /dev/null
+++ b/dts/Bindings/arm/omap/prcm.txt
@@ -0,0 +1,65 @@
+OMAP PRCM bindings
+
+Power Reset and Clock Manager lists the device clocks and clockdomains under
+a DT hierarchy. Each TI SoC can have multiple PRCM entities listed for it,
+each describing one module and the clock hierarchy under it. see [1] for
+documentation about the individual clock/clockdomain nodes.
+
+[1] Documentation/devicetree/bindings/clock/ti/*
+
+Required properties:
+- compatible: Must be one of:
+ "ti,am3-prcm"
+ "ti,am3-scrm"
+ "ti,am4-prcm"
+ "ti,am4-scrm"
+ "ti,omap2-prcm"
+ "ti,omap2-scrm"
+ "ti,omap3-prm"
+ "ti,omap3-cm"
+ "ti,omap3-scrm"
+ "ti,omap4-cm1"
+ "ti,omap4-prm"
+ "ti,omap4-cm2"
+ "ti,omap4-scrm"
+ "ti,omap5-prm"
+ "ti,omap5-cm-core-aon"
+ "ti,omap5-scrm"
+ "ti,omap5-cm-core"
+ "ti,dra7-prm"
+ "ti,dra7-cm-core-aon"
+ "ti,dra7-cm-core"
+- reg: Contains PRCM module register address range
+ (base address and length)
+- clocks: clocks for this module
+- clockdomains: clockdomains for this module
+
+Example:
+
+cm: cm@48004000 {
+ compatible = "ti,omap3-cm";
+ reg = <0x48004000 0x4000>;
+
+ cm_clocks: clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ cm_clockdomains: clockdomains {
+ };
+}
+
+&cm_clocks {
+ omap2_32k_fck: omap_32k_fck {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ };
+};
+
+&cm_clockdomains {
+ core_l3_clkdm: core_l3_clkdm {
+ compatible = "ti,clockdomain";
+ clocks = <&sdrc_ick>;
+ };
+};
diff --git a/dts/Bindings/arm/samsung/exynos-adc.txt b/dts/Bindings/arm/samsung/exynos-adc.txt
index 832fe8cc24..adc61b095b 100644
--- a/dts/Bindings/arm/samsung/exynos-adc.txt
+++ b/dts/Bindings/arm/samsung/exynos-adc.txt
@@ -14,14 +14,21 @@ Required properties:
for exynos4412/5250 controllers.
Must be "samsung,exynos-adc-v2" for
future controllers.
+ Must be "samsung,exynos3250-adc" for
+ controllers compatible with ADC of Exynos3250.
- reg: Contains ADC register address range (base address and
length) and the address of the phy enable register.
- interrupts: Contains the interrupt information for the timer. The
format is being dependent on which interrupt controller
the Samsung device uses.
- #io-channel-cells = <1>; As ADC has multiple outputs
-- clocks From common clock binding: handle to adc clock.
-- clock-names From common clock binding: Shall be "adc".
+- clocks From common clock bindings: handles to clocks specified
+ in "clock-names" property, in the same order.
+- clock-names From common clock bindings: list of clock input names
+ used by ADC block:
+ - "adc" : ADC bus clock
+ - "sclk" : ADC special clock (only for Exynos3250 and
+ compatible ADC block)
- vdd-supply VDD input supply.
Note: child nodes can be added for auto probing from device tree.
@@ -41,6 +48,20 @@ adc: adc@12D10000 {
vdd-supply = <&buck5_reg>;
};
+Example: adding device info in dtsi file for Exynos3250 with additional sclk
+
+adc: adc@126C0000 {
+ compatible = "samsung,exynos3250-adc", "samsung,exynos-adc-v2;
+ reg = <0x126C0000 0x100>, <0x10020718 0x4>;
+ interrupts = <0 137 0>;
+ #io-channel-cells = <1>;
+ io-channel-ranges;
+
+ clocks = <&cmu CLK_TSADC>, <&cmu CLK_SCLK_TSADC>;
+ clock-names = "adc", "sclk";
+
+ vdd-supply = <&buck5_reg>;
+};
Example: Adding child nodes in dts file
diff --git a/dts/Bindings/arm/samsung/pmu.txt b/dts/Bindings/arm/samsung/pmu.txt
index 2a4ab046a8..1e1979b229 100644
--- a/dts/Bindings/arm/samsung/pmu.txt
+++ b/dts/Bindings/arm/samsung/pmu.txt
@@ -7,13 +7,45 @@ Properties:
- "samsung,exynos4212-pmu" - for Exynos4212 SoC,
- "samsung,exynos4412-pmu" - for Exynos4412 SoC,
- "samsung,exynos5250-pmu" - for Exynos5250 SoC,
+ - "samsung,exynos5260-pmu" - for Exynos5260 SoC.
+ - "samsung,exynos5410-pmu" - for Exynos5410 SoC,
- "samsung,exynos5420-pmu" - for Exynos5420 SoC.
second value must be always "syscon".
- reg : offset and length of the register set.
+ - #clock-cells : must be <1>, since PMU requires once cell as clock specifier.
+ The single specifier cell is used as index to list of clocks
+ provided by PMU, which is currently:
+ 0 : SoC clock output (CLKOUT pin)
+
+ - clock-names : list of clock names for particular CLKOUT mux inputs in
+ following format:
+ "clkoutN", where N is a decimal number corresponding to
+ CLKOUT mux control bits value for given input, e.g.
+ "clkout0", "clkout7", "clkout15".
+
+ - clocks : list of phandles and specifiers to all input clocks listed in
+ clock-names property.
+
Example :
pmu_system_controller: system-controller@10040000 {
compatible = "samsung,exynos5250-pmu", "syscon";
reg = <0x10040000 0x5000>;
+ #clock-cells = <1>;
+ clock-names = "clkout0", "clkout1", "clkout2", "clkout3",
+ "clkout4", "clkout8", "clkout9";
+ clocks = <&clock CLK_OUT_DMC>, <&clock CLK_OUT_TOP>,
+ <&clock CLK_OUT_LEFTBUS>, <&clock CLK_OUT_RIGHTBUS>,
+ <&clock CLK_OUT_CPU>, <&clock CLK_XXTI>,
+ <&clock CLK_XUSBXTI>;
+};
+
+Example of clock consumer :
+
+usb3503: usb3503@08 {
+ /* ... */
+ clock-names = "refclk";
+ clocks = <&pmu_system_controller 0>;
+ /* ... */
};
diff --git a/dts/Bindings/arm/spear-misc.txt b/dts/Bindings/arm/spear-misc.txt
new file mode 100644
index 0000000000..cf649827ff
--- /dev/null
+++ b/dts/Bindings/arm/spear-misc.txt
@@ -0,0 +1,9 @@
+SPEAr Misc configuration
+===========================
+SPEAr SOCs have some miscellaneous registers which are used to configure
+few properties of different peripheral controllers.
+
+misc node required properties:
+
+- compatible Should be "st,spear1340-misc", "syscon".
+- reg: Address range of misc space upto 8K
diff --git a/dts/Bindings/arm/tegra.txt b/dts/Bindings/arm/tegra.txt
index 558ed4b4ef..73278c6d2d 100644
--- a/dts/Bindings/arm/tegra.txt
+++ b/dts/Bindings/arm/tegra.txt
@@ -30,6 +30,8 @@ board-specific compatible values:
nvidia,seaboard
nvidia,ventana
nvidia,whistler
+ toradex,apalis_t30
+ toradex,apalis_t30-eval
toradex,colibri_t20-512
toradex,iris
diff --git a/dts/Bindings/arm/xilinx.txt b/dts/Bindings/arm/xilinx.txt
index 6f1ed830b4..1f79953578 100644
--- a/dts/Bindings/arm/xilinx.txt
+++ b/dts/Bindings/arm/xilinx.txt
@@ -1,7 +1,7 @@
-Xilinx Zynq EP107 Emulation Platform board
+Xilinx Zynq Platforms Device Tree Bindings
-This board is an emulation platform for the Zynq product which is
-based on an ARM Cortex A9 processor.
+Boards with Zynq-7000 SOC based on an ARM Cortex A9 processor
+shall have the following properties.
Required root node properties:
- - compatible = "xlnx,zynq-ep107";
+ - compatible = "xlnx,zynq-7000";
diff --git a/dts/Bindings/ata/ahci-platform.txt b/dts/Bindings/ata/ahci-platform.txt
index c96d8dcf98..4ab09f2202 100644
--- a/dts/Bindings/ata/ahci-platform.txt
+++ b/dts/Bindings/ata/ahci-platform.txt
@@ -3,28 +3,43 @@
SATA nodes are defined to describe on-chip Serial ATA controllers.
Each SATA controller should have its own node.
+It is possible, but not required, to represent each port as a sub-node.
+It allows to enable each port independently when dealing with multiple
+PHYs.
+
Required properties:
- compatible : compatible string, one of:
- "allwinner,sun4i-a10-ahci"
- - "fsl,imx53-ahci"
- - "fsl,imx6q-ahci"
- "hisilicon,hisi-ahci"
- "ibm,476gtr-ahci"
- "marvell,armada-380-ahci"
- "snps,dwc-ahci"
- "snps,exynos5440-ahci"
- "snps,spear-ahci"
+ - "generic-ahci"
- interrupts : <interrupt mapping for SATA IRQ>
- reg : <registers mapping>
+Please note that when using "generic-ahci" you must also specify a SoC specific
+compatible:
+ compatible = "manufacturer,soc-model-ahci", "generic-ahci";
+
Optional properties:
- dma-coherent : Present if dma operations are coherent
- clocks : a list of phandle + clock specifier pairs
- target-supply : regulator for SATA target power
+- phys : reference to the SATA PHY node
+- phy-names : must be "sata-phy"
+
+Required properties when using sub-nodes:
+- #address-cells : number of cells to encode an address
+- #size-cells : number of cells representing the size of an address
+
+
+Sub-nodes required properties:
+- reg : the port number
+- phys : reference to the SATA PHY node
-"fsl,imx53-ahci", "fsl,imx6q-ahci" required properties:
-- clocks : must contain the sata, sata_ref and ahb clocks
-- clock-names : must contain "ahb" for the ahb clock
Examples:
sata@ffe08000 {
@@ -40,3 +55,23 @@ Examples:
clocks = <&pll6 0>, <&ahb_gates 25>;
target-supply = <&reg_ahci_5v>;
};
+
+With sub-nodes:
+ sata@f7e90000 {
+ compatible = "marvell,berlin2q-achi", "generic-ahci";
+ reg = <0xe90000 0x1000>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&chip CLKID_SATA>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sata0: sata-port@0 {
+ reg = <0>;
+ phys = <&sata_phy 0>;
+ };
+
+ sata1: sata-port@1 {
+ reg = <1>;
+ phys = <&sata_phy 1>;
+ };
+ };
diff --git a/dts/Bindings/ata/ahci-st.txt b/dts/Bindings/ata/ahci-st.txt
new file mode 100644
index 0000000000..0574a77a0b
--- /dev/null
+++ b/dts/Bindings/ata/ahci-st.txt
@@ -0,0 +1,31 @@
+STMicroelectronics STi SATA controller
+
+This binding describes a SATA device.
+
+Required properties:
+ - compatible : Must be "st,sti-ahci"
+ - reg : Physical base addresses and length of register sets
+ - interrupts : Interrupt associated with the SATA device
+ - interrupt-names : Associated name must be; "hostc"
+ - resets : The power-down and soft-reset lines of SATA IP
+ - reset-names : Associated names must be; "pwr-dwn" and "sw-rst"
+ - clocks : The phandle for the clock
+ - clock-names : Associated name must be; "ahci_clk"
+ - phys : The phandle for the PHY device
+ - phy-names : Associated name must be; "ahci_phy"
+
+Example:
+
+ sata0: sata@fe380000 {
+ compatible = "st,sti-ahci";
+ reg = <0xfe380000 0x1000>;
+ interrupts = <GIC_SPI 157 IRQ_TYPE_NONE>;
+ interrupt-names = "hostc";
+ phys = <&miphy365x_phy MIPHY_PORT_0 MIPHY_TYPE_SATA>;
+ phy-names = "ahci_phy";
+ resets = <&powerdown STIH416_SATA0_POWERDOWN>,
+ <&softreset STIH416_SATA0_SOFTRESET>;
+ reset-names = "pwr-dwn", "sw-rst";
+ clocks = <&clk_s_a0_ls CLK_ICN_REG>;
+ clock-names = "ahci_clk";
+ };
diff --git a/dts/Bindings/ata/imx-sata.txt b/dts/Bindings/ata/imx-sata.txt
new file mode 100644
index 0000000000..fa511db184
--- /dev/null
+++ b/dts/Bindings/ata/imx-sata.txt
@@ -0,0 +1,36 @@
+* Freescale i.MX AHCI SATA Controller
+
+The Freescale i.MX SATA controller mostly conforms to the AHCI interface
+with some special extensions at integration level.
+
+Required properties:
+- compatible : should be one of the following:
+ - "fsl,imx53-ahci" for i.MX53 SATA controller
+ - "fsl,imx6q-ahci" for i.MX6Q SATA controller
+- interrupts : interrupt mapping for SATA IRQ
+- reg : registers mapping
+- clocks : list of clock specifiers, must contain an entry for each
+ required entry in clock-names
+- clock-names : should include "sata", "sata_ref" and "ahb" entries
+
+Optional properties:
+- fsl,transmit-level-mV : transmit voltage level, in millivolts.
+- fsl,transmit-boost-mdB : transmit boost level, in milli-decibels
+- fsl,transmit-atten-16ths : transmit attenuation, in 16ths
+- fsl,receive-eq-mdB : receive equalisation, in milli-decibels
+ Please refer to the technical documentation or the driver source code
+ for the list of legal values for these options.
+- fsl,no-spread-spectrum : disable spread-spectrum clocking on the SATA
+ link.
+
+Examples:
+
+sata@02200000 {
+ compatible = "fsl,imx6q-ahci";
+ reg = <0x02200000 0x4000>;
+ interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6QDL_CLK_SATA>,
+ <&clks IMX6QDL_CLK_SATA_REF_100M>,
+ <&clks IMX6QDL_CLK_AHB>;
+ clock-names = "sata", "sata_ref", "ahb";
+};
diff --git a/dts/Bindings/ata/tegra-sata.txt b/dts/Bindings/ata/tegra-sata.txt
new file mode 100644
index 0000000000..946f207257
--- /dev/null
+++ b/dts/Bindings/ata/tegra-sata.txt
@@ -0,0 +1,30 @@
+Tegra124 SoC SATA AHCI controller
+
+Required properties :
+- compatible : "nvidia,tegra124-ahci".
+- reg : Should contain 2 entries:
+ - AHCI register set (SATA BAR5)
+ - SATA register set
+- interrupts : Defines the interrupt used by SATA
+- clocks : Must contain an entry for each entry in clock-names.
+ See ../clocks/clock-bindings.txt for details.
+- clock-names : Must include the following entries:
+ - sata
+ - sata-oob
+ - cml1
+ - pll_e
+- resets : Must contain an entry for each entry in reset-names.
+ See ../reset/reset.txt for details.
+- reset-names : Must include the following entries:
+ - sata
+ - sata-oob
+ - sata-cold
+- phys : Must contain an entry for each entry in phy-names.
+ See ../phy/phy-bindings.txt for details.
+- phy-names : Must include the following entries:
+ - sata-phy : XUSB PADCTL SATA PHY
+- hvdd-supply : Defines the SATA HVDD regulator
+- vddio-supply : Defines the SATA VDDIO regulator
+- avdd-supply : Defines the SATA AVDD regulator
+- target-5v-supply : Defines the SATA 5V power regulator
+- target-12v-supply : Defines the SATA 12V power regulator
diff --git a/dts/Bindings/clock/arm-integrator.txt b/dts/Bindings/clock/arm-integrator.txt
index 652914b17b..ecc69520bc 100644
--- a/dts/Bindings/clock/arm-integrator.txt
+++ b/dts/Bindings/clock/arm-integrator.txt
@@ -1,4 +1,4 @@
-Clock bindings for ARM Integrator Core Module clocks
+Clock bindings for ARM Integrator and Versatile Core Module clocks
Auxilary Oscillator Clock
@@ -12,7 +12,7 @@ parent node.
Required properties:
-- compatible: must be "arm,integrator-cm-auxosc"
+- compatible: must be "arm,integrator-cm-auxosc" or "arm,versatile-cm-auxosc"
- #clock-cells: must be <0>
Optional properties:
diff --git a/dts/Bindings/clock/clk-palmas-clk32kg-clocks.txt b/dts/Bindings/clock/clk-palmas-clk32kg-clocks.txt
new file mode 100644
index 0000000000..4208886d83
--- /dev/null
+++ b/dts/Bindings/clock/clk-palmas-clk32kg-clocks.txt
@@ -0,0 +1,35 @@
+* Palmas 32KHz clocks *
+
+Palmas device has two clock output pins for 32KHz, KG and KG_AUDIO.
+
+This binding uses the common clock binding ./clock-bindings.txt.
+
+Required properties:
+- compatible : "ti,palmas-clk32kg" for clk32kg clock
+ "ti,palmas-clk32kgaudio" for clk32kgaudio clock
+- #clock-cells : shall be set to 0.
+
+Optional property:
+- ti,external-sleep-control: The external enable input pins controlled the
+ enable/disable of clocks. The external enable input pins ENABLE1,
+ ENABLE2 and NSLEEP. The valid values for the external pins are:
+ PALMAS_EXT_CONTROL_PIN_ENABLE1 for ENABLE1 pin
+ PALMAS_EXT_CONTROL_PIN_ENABLE2 for ENABLE2 pin
+ PALMAS_EXT_CONTROL_PIN_NSLEEP for NSLEEP pin
+ Option 0 or missing this property means the clock is enabled/disabled
+ via register access and these pins do not have any control.
+ The macros of external control pins for DTS is defined at
+ dt-bindings/mfd/palmas.h
+
+Example:
+ #include <dt-bindings/mfd/palmas.h>
+ ...
+ palmas: tps65913@58 {
+ ...
+ clk32kg: palmas_clk32k@0 {
+ compatible = "ti,palmas-clk32kg";
+ #clock-cells = <0>;
+ ti,external-sleep-control = <PALMAS_EXT_CONTROL_PIN_NSLEEP>;
+ };
+ ...
+ };
diff --git a/dts/Bindings/clock/clk-s5pv210-audss.txt b/dts/Bindings/clock/clk-s5pv210-audss.txt
new file mode 100644
index 0000000000..4fc869b69d
--- /dev/null
+++ b/dts/Bindings/clock/clk-s5pv210-audss.txt
@@ -0,0 +1,53 @@
+* Samsung Audio Subsystem Clock Controller
+
+The Samsung Audio Subsystem clock controller generates and supplies clocks
+to Audio Subsystem block available in the S5PV210 and compatible SoCs.
+
+Required Properties:
+
+- compatible: should be "samsung,s5pv210-audss-clock".
+- reg: physical base address and length of the controller's register set.
+
+- #clock-cells: should be 1.
+
+- clocks:
+ - hclk: AHB bus clock of the Audio Subsystem.
+ - xxti: Optional fixed rate PLL reference clock, parent of mout_audss. If
+ not specified (i.e. xusbxti is used for PLL reference), it is fixed to
+ a clock named "xxti".
+ - fout_epll: Input PLL to the AudioSS block, parent of mout_audss.
+ - iiscdclk0: Optional external i2s clock, parent of mout_i2s. If not
+ specified, it is fixed to a clock named "iiscdclk0".
+ - sclk_audio0: Audio bus clock, parent of mout_i2s.
+
+- clock-names: Aliases for the above clocks. They should be "hclk",
+ "xxti", "fout_epll", "iiscdclk0", and "sclk_audio0" respectively.
+
+All available clocks are defined as preprocessor macros in
+dt-bindings/clock/s5pv210-audss-clk.h header and can be used in device
+tree sources.
+
+Example: Clock controller node.
+
+ clk_audss: clock-controller@c0900000 {
+ compatible = "samsung,s5pv210-audss-clock";
+ reg = <0xc0900000 0x1000>;
+ #clock-cells = <1>;
+ clock-names = "hclk", "xxti",
+ "fout_epll", "sclk_audio0";
+ clocks = <&clocks DOUT_HCLKP>, <&xxti>,
+ <&clocks FOUT_EPLL>, <&clocks SCLK_AUDIO0>;
+ };
+
+Example: I2S controller node that consumes the clock generated by the clock
+ controller. Refer to the standard clock bindings for information
+ about 'clocks' and 'clock-names' property.
+
+ i2s0: i2s@03830000 {
+ /* ... */
+ clock-names = "iis", "i2s_opclk0",
+ "i2s_opclk1";
+ clocks = <&clk_audss CLK_I2S>, <&clk_audss CLK_I2S>,
+ <&clk_audss CLK_DOUT_AUD_BUS>;
+ /* ... */
+ };
diff --git a/dts/Bindings/clock/clock-bindings.txt b/dts/Bindings/clock/clock-bindings.txt
index f15787817d..06fc6d541c 100644
--- a/dts/Bindings/clock/clock-bindings.txt
+++ b/dts/Bindings/clock/clock-bindings.txt
@@ -131,3 +131,39 @@ clock signal, and a UART.
("pll" and "pll-switched").
* The UART has its baud clock connected the external oscillator and its
register clock connected to the PLL clock (the "pll-switched" signal)
+
+==Assigned clock parents and rates==
+
+Some platforms may require initial configuration of default parent clocks
+and clock frequencies. Such a configuration can be specified in a device tree
+node through assigned-clocks, assigned-clock-parents and assigned-clock-rates
+properties. The assigned-clock-parents property should contain a list of parent
+clocks in form of phandle and clock specifier pairs, the assigned-clock-parents
+property the list of assigned clock frequency values - corresponding to clocks
+listed in the assigned-clocks property.
+
+To skip setting parent or rate of a clock its corresponding entry should be
+set to 0, or can be omitted if it is not followed by any non-zero entry.
+
+ uart@a000 {
+ compatible = "fsl,imx-uart";
+ reg = <0xa000 0x1000>;
+ ...
+ clocks = <&osc 0>, <&pll 1>;
+ clock-names = "baud", "register";
+
+ assigned-clocks = <&clkcon 0>, <&pll 2>;
+ assigned-clock-parents = <&pll 2>;
+ assigned-clock-rates = <0>, <460800>;
+ };
+
+In this example the <&pll 2> clock is set as parent of clock <&clkcon 0> and
+the <&pll 2> clock is assigned a frequency value of 460800 Hz.
+
+Configuring a clock's parent and rate through the device node that consumes
+the clock can be done only for clocks that have a single user. Specifying
+conflicting parent or rate configuration in multiple consumer nodes for
+a shared clock is forbidden.
+
+Configuration of common clocks, which affect multiple consumer devices can
+be similarly specified in the clock provider node.
diff --git a/dts/Bindings/clock/clps711x-clock.txt b/dts/Bindings/clock/clps711x-clock.txt
new file mode 100644
index 0000000000..ce5a7476f0
--- /dev/null
+++ b/dts/Bindings/clock/clps711x-clock.txt
@@ -0,0 +1,19 @@
+* Clock bindings for the Cirrus Logic CLPS711X CPUs
+
+Required properties:
+- compatible : Shall contain "cirrus,clps711x-clk".
+- reg : Address of the internal register set.
+- startup-frequency: Factory set CPU startup frequency in HZ.
+- #clock-cells : Should be <1>.
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell. See include/dt-bindings/clock/clps711x-clock.h
+for the full list of CLPS711X clock IDs.
+
+Example:
+ clks: clks@80000000 {
+ #clock-cells = <1>;
+ compatible = "cirrus,ep7312-clk", "cirrus,clps711x-clk";
+ reg = <0x80000000 0xc000>;
+ startup-frequency = <73728000>;
+ };
diff --git a/dts/Bindings/clock/imx1-clock.txt b/dts/Bindings/clock/imx1-clock.txt
new file mode 100644
index 0000000000..b7adf4e3ea
--- /dev/null
+++ b/dts/Bindings/clock/imx1-clock.txt
@@ -0,0 +1,26 @@
+* Clock bindings for Freescale i.MX1 CPUs
+
+Required properties:
+- compatible: Should be "fsl,imx1-ccm".
+- reg: Address and length of the register set.
+- #clock-cells: Should be <1>.
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx1-clock.h
+for the full list of i.MX1 clock IDs.
+
+Examples:
+ clks: ccm@0021b000 {
+ #clock-cells = <1>;
+ compatible = "fsl,imx1-ccm";
+ reg = <0x0021b000 0x1000>;
+ };
+
+ pwm: pwm@00208000 {
+ #pwm-cells = <2>;
+ compatible = "fsl,imx1-pwm";
+ reg = <0x00208000 0x1000>;
+ interrupts = <34>;
+ clocks = <&clks IMX1_CLK_DUMMY>, <&clks IMX1_CLK_PER1>;
+ clock-names = "ipg", "per";
+ };
diff --git a/dts/Bindings/clock/imx21-clock.txt b/dts/Bindings/clock/imx21-clock.txt
new file mode 100644
index 0000000000..c3b0db437c
--- /dev/null
+++ b/dts/Bindings/clock/imx21-clock.txt
@@ -0,0 +1,28 @@
+* Clock bindings for Freescale i.MX21
+
+Required properties:
+- compatible : Should be "fsl,imx21-ccm".
+- reg : Address and length of the register set.
+- interrupts : Should contain CCM interrupt.
+- #clock-cells: Should be <1>.
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx21-clock.h
+for the full list of i.MX21 clock IDs.
+
+Examples:
+ clks: ccm@10027000{
+ compatible = "fsl,imx21-ccm";
+ reg = <0x10027000 0x800>;
+ #clock-cells = <1>;
+ };
+
+ uart1: serial@1000a000 {
+ compatible = "fsl,imx21-uart";
+ reg = <0x1000a000 0x1000>;
+ interrupts = <20>;
+ clocks = <&clks IMX21_CLK_UART1_IPG_GATE>,
+ <&clks IMX21_CLK_PER1>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
diff --git a/dts/Bindings/clock/imx27-clock.txt b/dts/Bindings/clock/imx27-clock.txt
index 6bc9fd2c66..cc05de9ec3 100644
--- a/dts/Bindings/clock/imx27-clock.txt
+++ b/dts/Bindings/clock/imx27-clock.txt
@@ -7,117 +7,22 @@ Required properties:
- #clock-cells: Should be <1>
The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell. The following is a full list of i.MX27
-clocks and IDs.
-
- Clock ID
- -----------------------
- dummy 0
- ckih 1
- ckil 2
- mpll 3
- spll 4
- mpll_main2 5
- ahb 6
- ipg 7
- nfc_div 8
- per1_div 9
- per2_div 10
- per3_div 11
- per4_div 12
- vpu_sel 13
- vpu_div 14
- usb_div 15
- cpu_sel 16
- clko_sel 17
- cpu_div 18
- clko_div 19
- ssi1_sel 20
- ssi2_sel 21
- ssi1_div 22
- ssi2_div 23
- clko_en 24
- ssi2_ipg_gate 25
- ssi1_ipg_gate 26
- slcdc_ipg_gate 27
- sdhc3_ipg_gate 28
- sdhc2_ipg_gate 29
- sdhc1_ipg_gate 30
- scc_ipg_gate 31
- sahara_ipg_gate 32
- rtc_ipg_gate 33
- pwm_ipg_gate 34
- owire_ipg_gate 35
- lcdc_ipg_gate 36
- kpp_ipg_gate 37
- iim_ipg_gate 38
- i2c2_ipg_gate 39
- i2c1_ipg_gate 40
- gpt6_ipg_gate 41
- gpt5_ipg_gate 42
- gpt4_ipg_gate 43
- gpt3_ipg_gate 44
- gpt2_ipg_gate 45
- gpt1_ipg_gate 46
- gpio_ipg_gate 47
- fec_ipg_gate 48
- emma_ipg_gate 49
- dma_ipg_gate 50
- cspi3_ipg_gate 51
- cspi2_ipg_gate 52
- cspi1_ipg_gate 53
- nfc_baud_gate 54
- ssi2_baud_gate 55
- ssi1_baud_gate 56
- vpu_baud_gate 57
- per4_gate 58
- per3_gate 59
- per2_gate 60
- per1_gate 61
- usb_ahb_gate 62
- slcdc_ahb_gate 63
- sahara_ahb_gate 64
- lcdc_ahb_gate 65
- vpu_ahb_gate 66
- fec_ahb_gate 67
- emma_ahb_gate 68
- emi_ahb_gate 69
- dma_ahb_gate 70
- csi_ahb_gate 71
- brom_ahb_gate 72
- ata_ahb_gate 73
- wdog_ipg_gate 74
- usb_ipg_gate 75
- uart6_ipg_gate 76
- uart5_ipg_gate 77
- uart4_ipg_gate 78
- uart3_ipg_gate 79
- uart2_ipg_gate 80
- uart1_ipg_gate 81
- ckih_div1p5 82
- fpm 83
- mpll_osc_sel 84
- mpll_sel 85
- spll_gate 86
- mshc_div 87
- rtic_ipg_gate 88
- mshc_ipg_gate 89
- rtic_ahb_gate 90
- mshc_baud_gate 91
+ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx27-clock.h
+for the full list of i.MX27 clock IDs.
Examples:
+ clks: ccm@10027000{
+ compatible = "fsl,imx27-ccm";
+ reg = <0x10027000 0x1000>;
+ #clock-cells = <1>;
+ };
-clks: ccm@10027000{
- compatible = "fsl,imx27-ccm";
- reg = <0x10027000 0x1000>;
- #clock-cells = <1>;
-};
-
-uart1: serial@1000a000 {
- compatible = "fsl,imx27-uart", "fsl,imx21-uart";
- reg = <0x1000a000 0x1000>;
- interrupts = <20>;
- clocks = <&clks 81>, <&clks 61>;
- clock-names = "ipg", "per";
- status = "disabled";
-};
+ uart1: serial@1000a000 {
+ compatible = "fsl,imx27-uart", "fsl,imx21-uart";
+ reg = <0x1000a000 0x1000>;
+ interrupts = <20>;
+ clocks = <&clks IMX27_CLK_UART1_IPG_GATE>,
+ <&clks IMX27_CLK_PER1_GATE>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
diff --git a/dts/Bindings/clock/imx6q-clock.txt b/dts/Bindings/clock/imx6q-clock.txt
index 90ec91fe5c..9252912a5b 100644
--- a/dts/Bindings/clock/imx6q-clock.txt
+++ b/dts/Bindings/clock/imx6q-clock.txt
@@ -7,223 +7,13 @@ Required properties:
- #clock-cells: Should be <1>
The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell. The following is a full list of i.MX6Q
-clocks and IDs.
-
- Clock ID
- ---------------------------
- dummy 0
- ckil 1
- ckih 2
- osc 3
- pll2_pfd0_352m 4
- pll2_pfd1_594m 5
- pll2_pfd2_396m 6
- pll3_pfd0_720m 7
- pll3_pfd1_540m 8
- pll3_pfd2_508m 9
- pll3_pfd3_454m 10
- pll2_198m 11
- pll3_120m 12
- pll3_80m 13
- pll3_60m 14
- twd 15
- step 16
- pll1_sw 17
- periph_pre 18
- periph2_pre 19
- periph_clk2_sel 20
- periph2_clk2_sel 21
- axi_sel 22
- esai_sel 23
- asrc_sel 24
- spdif_sel 25
- gpu2d_axi 26
- gpu3d_axi 27
- gpu2d_core_sel 28
- gpu3d_core_sel 29
- gpu3d_shader_sel 30
- ipu1_sel 31
- ipu2_sel 32
- ldb_di0_sel 33
- ldb_di1_sel 34
- ipu1_di0_pre_sel 35
- ipu1_di1_pre_sel 36
- ipu2_di0_pre_sel 37
- ipu2_di1_pre_sel 38
- ipu1_di0_sel 39
- ipu1_di1_sel 40
- ipu2_di0_sel 41
- ipu2_di1_sel 42
- hsi_tx_sel 43
- pcie_axi_sel 44
- ssi1_sel 45
- ssi2_sel 46
- ssi3_sel 47
- usdhc1_sel 48
- usdhc2_sel 49
- usdhc3_sel 50
- usdhc4_sel 51
- enfc_sel 52
- emi_sel 53
- emi_slow_sel 54
- vdo_axi_sel 55
- vpu_axi_sel 56
- cko1_sel 57
- periph 58
- periph2 59
- periph_clk2 60
- periph2_clk2 61
- ipg 62
- ipg_per 63
- esai_pred 64
- esai_podf 65
- asrc_pred 66
- asrc_podf 67
- spdif_pred 68
- spdif_podf 69
- can_root 70
- ecspi_root 71
- gpu2d_core_podf 72
- gpu3d_core_podf 73
- gpu3d_shader 74
- ipu1_podf 75
- ipu2_podf 76
- ldb_di0_podf 77
- ldb_di1_podf 78
- ipu1_di0_pre 79
- ipu1_di1_pre 80
- ipu2_di0_pre 81
- ipu2_di1_pre 82
- hsi_tx_podf 83
- ssi1_pred 84
- ssi1_podf 85
- ssi2_pred 86
- ssi2_podf 87
- ssi3_pred 88
- ssi3_podf 89
- uart_serial_podf 90
- usdhc1_podf 91
- usdhc2_podf 92
- usdhc3_podf 93
- usdhc4_podf 94
- enfc_pred 95
- enfc_podf 96
- emi_podf 97
- emi_slow_podf 98
- vpu_axi_podf 99
- cko1_podf 100
- axi 101
- mmdc_ch0_axi_podf 102
- mmdc_ch1_axi_podf 103
- arm 104
- ahb 105
- apbh_dma 106
- asrc 107
- can1_ipg 108
- can1_serial 109
- can2_ipg 110
- can2_serial 111
- ecspi1 112
- ecspi2 113
- ecspi3 114
- ecspi4 115
- ecspi5 116
- enet 117
- esai 118
- gpt_ipg 119
- gpt_ipg_per 120
- gpu2d_core 121
- gpu3d_core 122
- hdmi_iahb 123
- hdmi_isfr 124
- i2c1 125
- i2c2 126
- i2c3 127
- iim 128
- enfc 129
- ipu1 130
- ipu1_di0 131
- ipu1_di1 132
- ipu2 133
- ipu2_di0 134
- ldb_di0 135
- ldb_di1 136
- ipu2_di1 137
- hsi_tx 138
- mlb 139
- mmdc_ch0_axi 140
- mmdc_ch1_axi 141
- ocram 142
- openvg_axi 143
- pcie_axi 144
- pwm1 145
- pwm2 146
- pwm3 147
- pwm4 148
- per1_bch 149
- gpmi_bch_apb 150
- gpmi_bch 151
- gpmi_io 152
- gpmi_apb 153
- sata 154
- sdma 155
- spba 156
- ssi1 157
- ssi2 158
- ssi3 159
- uart_ipg 160
- uart_serial 161
- usboh3 162
- usdhc1 163
- usdhc2 164
- usdhc3 165
- usdhc4 166
- vdo_axi 167
- vpu_axi 168
- cko1 169
- pll1_sys 170
- pll2_bus 171
- pll3_usb_otg 172
- pll4_audio 173
- pll5_video 174
- pll8_mlb 175
- pll7_usb_host 176
- pll6_enet 177
- ssi1_ipg 178
- ssi2_ipg 179
- ssi3_ipg 180
- rom 181
- usbphy1 182
- usbphy2 183
- ldb_di0_div_3_5 184
- ldb_di1_div_3_5 185
- sata_ref 186
- sata_ref_100m 187
- pcie_ref 188
- pcie_ref_125m 189
- enet_ref 190
- usbphy1_gate 191
- usbphy2_gate 192
- pll4_post_div 193
- pll5_post_div 194
- pll5_video_div 195
- eim_slow 196
- spdif 197
- cko2_sel 198
- cko2_podf 199
- cko2 200
- cko 201
- vdoa 202
- pll4_audio_div 203
- lvds1_sel 204
- lvds2_sel 205
- lvds1_gate 206
- lvds2_gate 207
- esai_ahb 208
+ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx6qdl-clock.h
+for the full list of i.MX6 Quad and DualLite clock IDs.
Examples:
+#include <dt-bindings/clock/imx6qdl-clock.h>
+
clks: ccm@020c4000 {
compatible = "fsl,imx6q-ccm";
reg = <0x020c4000 0x4000>;
@@ -235,7 +25,7 @@ uart1: serial@02020000 {
compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x02020000 0x4000>;
interrupts = <0 26 0x04>;
- clocks = <&clks 160>, <&clks 161>;
+ clocks = <&clks IMX6QDL_CLK_UART_IPG>, <&clks IMX6QDL_CLK_UART_SERIAL>;
clock-names = "ipg", "per";
status = "disabled";
};
diff --git a/dts/Bindings/clock/mvebu-cpu-clock.txt b/dts/Bindings/clock/mvebu-cpu-clock.txt
index feb8301307..99c214660b 100644
--- a/dts/Bindings/clock/mvebu-cpu-clock.txt
+++ b/dts/Bindings/clock/mvebu-cpu-clock.txt
@@ -3,14 +3,15 @@ Device Tree Clock bindings for cpu clock of Marvell EBU platforms
Required properties:
- compatible : shall be one of the following:
"marvell,armada-xp-cpu-clock" - cpu clocks for Armada XP
-- reg : Address and length of the clock complex register set
+- reg : Address and length of the clock complex register set, followed
+ by address and length of the PMU DFS registers
- #clock-cells : should be set to 1.
- clocks : shall be the input parent clock phandle for the clock.
cpuclk: clock-complex@d0018700 {
#clock-cells = <1>;
compatible = "marvell,armada-xp-cpu-clock";
- reg = <0xd0018700 0xA0>;
+ reg = <0xd0018700 0xA0>, <0x1c054 0x10>;
clocks = <&coreclk 1>;
}
diff --git a/dts/Bindings/clock/qcom,gcc.txt b/dts/Bindings/clock/qcom,gcc.txt
index 9cfcb4f2bc..aba3d254e0 100644
--- a/dts/Bindings/clock/qcom,gcc.txt
+++ b/dts/Bindings/clock/qcom,gcc.txt
@@ -5,6 +5,8 @@ Required properties :
- compatible : shall contain only one of the following:
"qcom,gcc-apq8064"
+ "qcom,gcc-apq8084"
+ "qcom,gcc-ipq8064"
"qcom,gcc-msm8660"
"qcom,gcc-msm8960"
"qcom,gcc-msm8974"
diff --git a/dts/Bindings/clock/qcom,mmcc.txt b/dts/Bindings/clock/qcom,mmcc.txt
index d572e9964c..29ebf84d25 100644
--- a/dts/Bindings/clock/qcom,mmcc.txt
+++ b/dts/Bindings/clock/qcom,mmcc.txt
@@ -4,6 +4,8 @@ Qualcomm Multimedia Clock & Reset Controller Binding
Required properties :
- compatible : shall contain only one of the following:
+ "qcom,mmcc-apq8064"
+ "qcom,mmcc-apq8084"
"qcom,mmcc-msm8660"
"qcom,mmcc-msm8960"
"qcom,mmcc-msm8974"
diff --git a/dts/Bindings/clock/rockchip,rk3188-cru.txt b/dts/Bindings/clock/rockchip,rk3188-cru.txt
new file mode 100644
index 0000000000..0c2bf5eba4
--- /dev/null
+++ b/dts/Bindings/clock/rockchip,rk3188-cru.txt
@@ -0,0 +1,61 @@
+* Rockchip RK3188/RK3066 Clock and Reset Unit
+
+The RK3188/RK3066 clock controller generates and supplies clock to various
+controllers within the SoC and also implements a reset controller for SoC
+peripherals.
+
+Required Properties:
+
+- compatible: should be "rockchip,rk3188-cru", "rockchip,rk3188a-cru" or
+ "rockchip,rk3066a-cru"
+- reg: physical base address of the controller and length of memory mapped
+ region.
+- #clock-cells: should be 1.
+- #reset-cells: should be 1.
+
+Optional Properties:
+
+- rockchip,grf: phandle to the syscon managing the "general register files"
+ If missing pll rates are not changable, due to the missing pll lock status.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. All available clocks are defined as
+preprocessor macros in the dt-bindings/clock/rk3188-cru.h and
+dt-bindings/clock/rk3066-cru.h headers and can be used in device tree sources.
+Similar macros exist for the reset sources in these files.
+
+External clocks:
+
+There are several clocks that are generated outside the SoC. It is expected
+that they are defined using standard clock bindings with following
+clock-output-names:
+ - "xin24m" - crystal input - required,
+ - "xin32k" - rtc clock - optional,
+ - "xin27m" - 27mhz crystal input on rk3066 - optional,
+ - "ext_hsadc" - external HSADC clock - optional,
+ - "ext_cif0" - external camera clock - optional,
+ - "ext_rmii" - external RMII clock - optional,
+ - "ext_jtag" - externalJTAG clock - optional
+
+Example: Clock controller node:
+
+ cru: cru@20000000 {
+ compatible = "rockchip,rk3188-cru";
+ reg = <0x20000000 0x1000>;
+ rockchip,grf = <&grf>;
+
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+Example: UART controller node that consumes the clock generated by the clock
+ controller:
+
+ uart0: serial@10124000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x10124000 0x400>;
+ interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <1>;
+ clocks = <&cru SCLK_UART0>;
+ };
diff --git a/dts/Bindings/clock/rockchip,rk3288-cru.txt b/dts/Bindings/clock/rockchip,rk3288-cru.txt
new file mode 100644
index 0000000000..c9fbb76573
--- /dev/null
+++ b/dts/Bindings/clock/rockchip,rk3288-cru.txt
@@ -0,0 +1,61 @@
+* Rockchip RK3288 Clock and Reset Unit
+
+The RK3288 clock controller generates and supplies clock to various
+controllers within the SoC and also implements a reset controller for SoC
+peripherals.
+
+Required Properties:
+
+- compatible: should be "rockchip,rk3288-cru"
+- reg: physical base address of the controller and length of memory mapped
+ region.
+- #clock-cells: should be 1.
+- #reset-cells: should be 1.
+
+Optional Properties:
+
+- rockchip,grf: phandle to the syscon managing the "general register files"
+ If missing pll rates are not changable, due to the missing pll lock status.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. All available clocks are defined as
+preprocessor macros in the dt-bindings/clock/rk3288-cru.h headers and can be
+used in device tree sources. Similar macros exist for the reset sources in
+these files.
+
+External clocks:
+
+There are several clocks that are generated outside the SoC. It is expected
+that they are defined using standard clock bindings with following
+clock-output-names:
+ - "xin24m" - crystal input - required,
+ - "xin32k" - rtc clock - optional,
+ - "ext_i2s" - external I2S clock - optional,
+ - "ext_hsadc" - external HSADC clock - optional,
+ - "ext_edp_24m" - external display port clock - optional,
+ - "ext_vip" - external VIP clock - optional,
+ - "ext_isp" - external ISP clock - optional,
+ - "ext_jtag" - external JTAG clock - optional
+
+Example: Clock controller node:
+
+ cru: cru@20000000 {
+ compatible = "rockchip,rk3188-cru";
+ reg = <0x20000000 0x1000>;
+ rockchip,grf = <&grf>;
+
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+Example: UART controller node that consumes the clock generated by the clock
+ controller:
+
+ uart0: serial@10124000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x10124000 0x400>;
+ interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <1>;
+ clocks = <&cru SCLK_UART0>;
+ };
diff --git a/dts/Bindings/clock/rockchip.txt b/dts/Bindings/clock/rockchip.txt
index a891c823ed..22f6769e5d 100644
--- a/dts/Bindings/clock/rockchip.txt
+++ b/dts/Bindings/clock/rockchip.txt
@@ -6,6 +6,9 @@ This binding uses the common clock binding[1].
== Gate clocks ==
+These bindings are deprecated!
+Please use the soc specific CRU bindings instead.
+
The gate registers form a continuos block which makes the dt node
structure a matter of taste, as either all gates can be put into
one gate clock spanning all registers or they can be divided into
diff --git a/dts/Bindings/clock/samsung,s5pv210-clock.txt b/dts/Bindings/clock/samsung,s5pv210-clock.txt
new file mode 100644
index 0000000000..effd9401c1
--- /dev/null
+++ b/dts/Bindings/clock/samsung,s5pv210-clock.txt
@@ -0,0 +1,78 @@
+* Samsung S5P6442/S5PC110/S5PV210 Clock Controller
+
+Samsung S5P6442, S5PC110 and S5PV210 SoCs contain integrated clock
+controller, which generates and supplies clock to various controllers
+within the SoC.
+
+Required Properties:
+
+- compatible: should be one of following:
+ - "samsung,s5pv210-clock" : for clock controller of Samsung
+ S5PC110/S5PV210 SoCs,
+ - "samsung,s5p6442-clock" : for clock controller of Samsung
+ S5P6442 SoC.
+
+- reg: physical base address of the controller and length of memory mapped
+ region.
+
+- #clock-cells: should be 1.
+
+All available clocks are defined as preprocessor macros in
+dt-bindings/clock/s5pv210.h header and can be used in device tree sources.
+
+External clocks:
+
+There are several clocks that are generated outside the SoC. It is expected
+that they are defined using standard clock bindings with following
+clock-output-names:
+ - "xxti": external crystal oscillator connected to XXTI and XXTO pins of
+the SoC,
+ - "xusbxti": external crystal oscillator connected to XUSBXTI and XUSBXTO
+pins of the SoC,
+
+A subset of above clocks available on given board shall be specified in
+board device tree, including the system base clock, as selected by XOM[0]
+pin of the SoC. Refer to generic fixed rate clock bindings
+documentation[1] for more information how to specify these clocks.
+
+[1] Documentation/devicetree/bindings/clock/fixed-clock.txt
+
+Example: Clock controller node:
+
+ clock: clock-controller@7e00f000 {
+ compatible = "samsung,s5pv210-clock";
+ reg = <0x7e00f000 0x1000>;
+ #clock-cells = <1>;
+ };
+
+Example: Required external clocks:
+
+ xxti: clock-xxti {
+ compatible = "fixed-clock";
+ clock-output-names = "xxti";
+ clock-frequency = <24000000>;
+ #clock-cells = <0>;
+ };
+
+ xusbxti: clock-xusbxti {
+ compatible = "fixed-clock";
+ clock-output-names = "xusbxti";
+ clock-frequency = <24000000>;
+ #clock-cells = <0>;
+ };
+
+Example: UART controller node that consumes the clock generated by the clock
+ controller (refer to the standard clock bindings for information about
+ "clocks" and "clock-names" properties):
+
+ uart0: serial@e2900000 {
+ compatible = "samsung,s5pv210-uart";
+ reg = <0xe2900000 0x400>;
+ interrupt-parent = <&vic1>;
+ interrupts = <10>;
+ clock-names = "uart", "clk_uart_baud0",
+ "clk_uart_baud1";
+ clocks = <&clocks UART0>, <&clocks UART0>,
+ <&clocks SCLK_UART0>;
+ status = "disabled";
+ };
diff --git a/dts/Bindings/clock/st/st,clkgen-divmux.txt b/dts/Bindings/clock/st/st,clkgen-divmux.txt
index ae56315fce..6247652044 100644
--- a/dts/Bindings/clock/st/st,clkgen-divmux.txt
+++ b/dts/Bindings/clock/st/st,clkgen-divmux.txt
@@ -24,26 +24,26 @@ Required properties:
Example:
- clockgenA@fd345000 {
+ clockgen-a@fd345000 {
reg = <0xfd345000 0xb50>;
- CLK_M_A1_DIV1: CLK_M_A1_DIV1 {
+ clk_m_a1_div1: clk-m-a1-div1 {
#clock-cells = <1>;
compatible = "st,clkgena-divmux-c32-odf1",
"st,clkgena-divmux";
- clocks = <&CLK_M_A1_OSC_PREDIV>,
- <&CLK_M_A1_PLL0 1>, /* PLL0 PHI1 */
- <&CLK_M_A1_PLL1 1>; /* PLL1 PHI1 */
-
- clock-output-names = "CLK_M_RX_ICN_TS",
- "CLK_M_RX_ICN_VDP_0",
- "", /* Unused */
- "CLK_M_PRV_T1_BUS",
- "CLK_M_ICN_REG_12",
- "CLK_M_ICN_REG_10",
- "", /* Unused */
- "CLK_M_ICN_ST231";
+ clocks = <&clk_m_a1_osc_prediv>,
+ <&clk_m_a1_pll0 1>, /* PLL0 PHI1 */
+ <&clk_m_a1_pll1 1>; /* PLL1 PHI1 */
+
+ clock-output-names = "clk-m-rx-icn-ts",
+ "clk-m-rx-icn-vdp-0",
+ "", /* unused */
+ "clk-m-prv-t1-bus",
+ "clk-m-icn-reg-12",
+ "clk-m-icn-reg-10",
+ "", /* unused */
+ "clk-m-icn-st231";
};
};
diff --git a/dts/Bindings/clock/st/st,clkgen-mux.txt b/dts/Bindings/clock/st/st,clkgen-mux.txt
index 943e0808e2..f1fa91c687 100644
--- a/dts/Bindings/clock/st/st,clkgen-mux.txt
+++ b/dts/Bindings/clock/st/st,clkgen-mux.txt
@@ -17,7 +17,7 @@ Required properties:
"st,stih416-clkgenf-vcc-sd", "st,clkgen-mux"
"st,stih415-clkgen-a9-mux", "st,clkgen-mux"
"st,stih416-clkgen-a9-mux", "st,clkgen-mux"
-
+ "st,stih407-clkgen-a9-mux", "st,clkgen-mux"
- #clock-cells : from common clock binding; shall be set to 0.
@@ -27,10 +27,10 @@ Required properties:
Example:
- CLK_M_HVA: CLK_M_HVA {
+ clk_m_hva: clk-m-hva@fd690868 {
#clock-cells = <0>;
compatible = "st,stih416-clkgenf-vcc-hva", "st,clkgen-mux";
reg = <0xfd690868 4>;
- clocks = <&CLOCKGEN_F 1>, <&CLK_M_A1_DIV0 3>;
+ clocks = <&clockgen_f 1>, <&clk_m_a1_div0 3>;
};
diff --git a/dts/Bindings/clock/st/st,clkgen-pll.txt b/dts/Bindings/clock/st/st,clkgen-pll.txt
index 81eb3855ab..efb51cf0c8 100644
--- a/dts/Bindings/clock/st/st,clkgen-pll.txt
+++ b/dts/Bindings/clock/st/st,clkgen-pll.txt
@@ -19,11 +19,14 @@ Required properties:
"st,stih415-plls-c32-ddr", "st,clkgen-plls-c32"
"st,stih416-plls-c32-a9", "st,clkgen-plls-c32"
"st,stih416-plls-c32-ddr", "st,clkgen-plls-c32"
+ "st,stih407-plls-c32-a0", "st,clkgen-plls-c32"
+ "st,stih407-plls-c32-a9", "st,clkgen-plls-c32"
+ "st,stih407-plls-c32-c0_0", "st,clkgen-plls-c32"
+ "st,stih407-plls-c32-c0_1", "st,clkgen-plls-c32"
"st,stih415-gpu-pll-c32", "st,clkgengpu-pll-c32"
"st,stih416-gpu-pll-c32", "st,clkgengpu-pll-c32"
-
- #clock-cells : From common clock binding; shall be set to 1.
- clocks : From common clock binding
@@ -32,17 +35,17 @@ Required properties:
Example:
- clockgenA@fee62000 {
+ clockgen-a@fee62000 {
reg = <0xfee62000 0xb48>;
- CLK_S_A0_PLL: CLK_S_A0_PLL {
+ clk_s_a0_pll: clk-s-a0-pll {
#clock-cells = <1>;
compatible = "st,clkgena-plls-c65";
- clocks = <&CLK_SYSIN>;
+ clocks = <&clk_sysin>;
- clock-output-names = "CLK_S_A0_PLL0_HS",
- "CLK_S_A0_PLL0_LS",
- "CLK_S_A0_PLL1";
+ clock-output-names = "clk-s-a0-pll0-hs",
+ "clk-s-a0-pll0-ls",
+ "clk-s-a0-pll1";
};
};
diff --git a/dts/Bindings/clock/st/st,clkgen-prediv.txt b/dts/Bindings/clock/st/st,clkgen-prediv.txt
index 566c9d79ed..604766c261 100644
--- a/dts/Bindings/clock/st/st,clkgen-prediv.txt
+++ b/dts/Bindings/clock/st/st,clkgen-prediv.txt
@@ -20,17 +20,17 @@ Required properties:
Example:
- clockgenA@fd345000 {
+ clockgen-a@fd345000 {
reg = <0xfd345000 0xb50>;
- CLK_M_A2_OSC_PREDIV: CLK_M_A2_OSC_PREDIV {
+ clk_m_a2_osc_prediv: clk-m-a2-osc-prediv {
#clock-cells = <0>;
compatible = "st,clkgena-prediv-c32",
"st,clkgena-prediv";
- clocks = <&CLK_SYSIN>;
+ clocks = <&clk_sysin>;
- clock-output-names = "CLK_M_A2_OSC_PREDIV";
+ clock-output-names = "clk-m-a2-osc-prediv";
};
};
diff --git a/dts/Bindings/clock/st/st,clkgen-vcc.txt b/dts/Bindings/clock/st/st,clkgen-vcc.txt
index 4e3ff28b04..109b3eddcb 100644
--- a/dts/Bindings/clock/st/st,clkgen-vcc.txt
+++ b/dts/Bindings/clock/st/st,clkgen-vcc.txt
@@ -32,22 +32,30 @@ Required properties:
Example:
- CLOCKGEN_C_VCC: CLOCKGEN_C_VCC {
+ clockgen_c_vcc: clockgen-c-vcc@0xfe8308ac {
#clock-cells = <1>;
compatible = "st,stih416-clkgenc", "st,clkgen-vcc";
reg = <0xfe8308ac 12>;
- clocks = <&CLK_S_VCC_HD>, <&CLOCKGEN_C 1>,
- <&CLK_S_TMDS_FROMPHY>, <&CLOCKGEN_C 2>;
-
- clock-output-names =
- "CLK_S_PIX_HDMI", "CLK_S_PIX_DVO",
- "CLK_S_OUT_DVO", "CLK_S_PIX_HD",
- "CLK_S_HDDAC", "CLK_S_DENC",
- "CLK_S_SDDAC", "CLK_S_PIX_MAIN",
- "CLK_S_PIX_AUX", "CLK_S_STFE_FRC_0",
- "CLK_S_REF_MCRU", "CLK_S_SLAVE_MCRU",
- "CLK_S_TMDS_HDMI", "CLK_S_HDMI_REJECT_PLL",
- "CLK_S_THSENS";
+ clocks = <&clk_s_vcc_hd>,
+ <&clockgen_c 1>,
+ <&clk_s_tmds_fromphy>,
+ <&clockgen_c 2>;
+
+ clock-output-names = "clk-s-pix-hdmi",
+ "clk-s-pix-dvo",
+ "clk-s-out-dvo",
+ "clk-s-pix-hd",
+ "clk-s-hddac",
+ "clk-s-denc",
+ "clk-s-sddac",
+ "clk-s-pix-main",
+ "clk-s-pix-aux",
+ "clk-s-stfe-frc-0",
+ "clk-s-ref-mcru",
+ "clk-s-slave-mcru",
+ "clk-s-tmds-hdmi",
+ "clk-s-hdmi-reject-pll",
+ "clk-s-thsens";
};
diff --git a/dts/Bindings/clock/st/st,clkgen.txt b/dts/Bindings/clock/st/st,clkgen.txt
index 49ec5ae18b..78978f1f51 100644
--- a/dts/Bindings/clock/st/st,clkgen.txt
+++ b/dts/Bindings/clock/st/st,clkgen.txt
@@ -24,60 +24,77 @@ address is common of all subnode.
quadfs_node {
...
};
+
+ mux_node {
+ ...
+ };
+
+ vcc_node {
+ ...
+ };
+
+ flexgen_node {
+ ...
+ };
...
};
This binding uses the common clock binding[1].
-Each subnode should use the binding discribe in [2]..[4]
+Each subnode should use the binding discribe in [2]..[7]
[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-[2] Documentation/devicetree/bindings/clock/st,quadfs.txt
-[3] Documentation/devicetree/bindings/clock/st,quadfs.txt
-[4] Documentation/devicetree/bindings/clock/st,quadfs.txt
+[2] Documentation/devicetree/bindings/clock/st,clkgen-divmux.txt
+[3] Documentation/devicetree/bindings/clock/st,clkgen-mux.txt
+[4] Documentation/devicetree/bindings/clock/st,clkgen-pll.txt
+[5] Documentation/devicetree/bindings/clock/st,clkgen-prediv.txt
+[6] Documentation/devicetree/bindings/clock/st,vcc.txt
+[7] Documentation/devicetree/bindings/clock/st,quadfs.txt
+[8] Documentation/devicetree/bindings/clock/st,flexgen.txt
+
Required properties:
- reg : A Base address and length of the register set.
Example:
- clockgenA@fee62000 {
+ clockgen-a@fee62000 {
reg = <0xfee62000 0xb48>;
- CLK_S_A0_PLL: CLK_S_A0_PLL {
+ clk_s_a0_pll: clk-s-a0-pll {
#clock-cells = <1>;
compatible = "st,clkgena-plls-c65";
- clocks = <&CLK_SYSIN>;
+ clocks = <&clk-sysin>;
- clock-output-names = "CLK_S_A0_PLL0_HS",
- "CLK_S_A0_PLL0_LS",
- "CLK_S_A0_PLL1";
+ clock-output-names = "clk-s-a0-pll0-hs",
+ "clk-s-a0-pll0-ls",
+ "clk-s-a0-pll1";
};
- CLK_S_A0_OSC_PREDIV: CLK_S_A0_OSC_PREDIV {
+ clk_s_a0_osc_prediv: clk-s-a0-osc-prediv {
#clock-cells = <0>;
compatible = "st,clkgena-prediv-c65",
"st,clkgena-prediv";
- clocks = <&CLK_SYSIN>;
+ clocks = <&clk_sysin>;
- clock-output-names = "CLK_S_A0_OSC_PREDIV";
+ clock-output-names = "clk-s-a0-osc-prediv";
};
- CLK_S_A0_HS: CLK_S_A0_HS {
+ clk_s_a0_hs: clk-s-a0-hs {
#clock-cells = <1>;
compatible = "st,clkgena-divmux-c65-hs",
"st,clkgena-divmux";
- clocks = <&CLK_S_A0_OSC_PREDIV>,
- <&CLK_S_A0_PLL 0>, /* PLL0 HS */
- <&CLK_S_A0_PLL 2>; /* PLL1 */
+ clocks = <&clk-s_a0_osc_prediv>,
+ <&clk-s_a0_pll 0>, /* pll0 hs */
+ <&clk-s_a0_pll 2>; /* pll1 */
- clock-output-names = "CLK_S_FDMA_0",
- "CLK_S_FDMA_1",
- ""; /* CLK_S_JIT_SENSE */
- /* Fourth output unused */
+ clock-output-names = "clk-s-fdma-0",
+ "clk-s-fdma-1",
+ ""; /* clk-s-jit-sense */
+ /* fourth output unused */
};
};
diff --git a/dts/Bindings/clock/st/st,flexgen.txt b/dts/Bindings/clock/st/st,flexgen.txt
new file mode 100644
index 0000000000..1d3ace0881
--- /dev/null
+++ b/dts/Bindings/clock/st/st,flexgen.txt
@@ -0,0 +1,119 @@
+Binding for a type of flexgen structure found on certain
+STMicroelectronics consumer electronics SoC devices
+
+This structure includes:
+- a clock cross bar (represented by a mux element)
+- a pre and final dividers (represented by a divider and gate elements)
+
+Flexgen structure is a part of Clockgen[1].
+
+Please find an example below:
+
+ Clockgen block diagram
+ -------------------------------------------------------------------
+ | Flexgen stucture |
+ | --------------------------------------------- |
+ | | ------- -------- -------- | |
+clk_sysin | | | | | | | | |
+---|-----------------|-->| | | | | | | |
+ | | | | | | | | | | |
+ | | ------- | | | |Pre | |Final | | |
+ | | |PLL0 | | | | |Dividers| |Dividers| | |
+ | |->| | | | | | x32 | | x32 | | |
+ | | | odf_0|----|-->| | | | | | | |
+ | | | | | | | | | | | | |
+ | | | | | | | | | | | | |
+ | | | | | | | | | | | | |
+ | | | | | | | | | | | | |
+ | | ------- | | | | | | | | |
+ | | | | | | | | | | |
+ | | ------- | | Clock | | | | | | |
+ | | |PLL1 | | | | | | | | | |
+ | |->| | | | Cross | | | | | | |
+ | | | odf_0|----|-->| | | | | | CLK_DIV[31:0]
+ | | | | | | Bar |====>| |====>| |===|=========>
+ | | | | | | | | | | | | |
+ | | | | | | | | | | | | |
+ | | | | | | | | | | | | |
+ | | ------- | | | | | | | | |
+ | | | | | | | | | | |
+ | | ------- | | | | | | | | |
+ | | |QUADFS | | | | | | | | | |
+ | |->| ch0|----|-->| | | | | | | |
+ | | | | | | | | | | | |
+ | | ch1|----|-->| | | | | | | |
+ | | | | | | | | | | | |
+ | | ch2|----|-->| | | DIV | | DIV | | |
+ | | | | | | | 1 to | | 1 to | | |
+ | | ch3|----|-->| | | 1024 | | 64 | | |
+ | ------- | | | | | | | | |
+ | | ------- -------- -------- | |
+ | -------------------------------------------- |
+ | |
+ -------------------------------------------------------------------
+
+This binding uses the common clock binding[2].
+
+[1] Documentation/devicetree/bindings/clock/st/st,clkgen.txt
+[2] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be:
+ "st,flexgen"
+
+- #clock-cells : from common clock binding; shall be set to 1 (multiple clock
+ outputs).
+
+- clocks : must be set to the parent's phandle. it's could be output clocks of
+ a quadsfs or/and a pll or/and clk_sysin (up to 7 clocks)
+
+- clock-output-names : List of strings used to name the clock outputs.
+
+Example:
+
+ clk_s_c0_flexgen: clk-s-c0-flexgen {
+
+ #clock-cells = <1>;
+ compatible = "st,flexgen";
+
+ clocks = <&clk_s_c0_pll0 0>,
+ <&clk_s_c0_pll1 0>,
+ <&clk_s_c0_quadfs 0>,
+ <&clk_s_c0_quadfs 1>,
+ <&clk_s_c0_quadfs 2>,
+ <&clk_s_c0_quadfs 3>,
+ <&clk_sysin>;
+
+ clock-output-names = "clk-icn-gpu",
+ "clk-fdma",
+ "clk-nand",
+ "clk-hva",
+ "clk-proc-stfe",
+ "clk-proc-tp",
+ "clk-rx-icn-dmu",
+ "clk-rx-icn-hva",
+ "clk-icn-cpu",
+ "clk-tx-icn-dmu",
+ "clk-mmc-0",
+ "clk-mmc-1",
+ "clk-jpegdec",
+ "clk-ext2fa9",
+ "clk-ic-bdisp-0",
+ "clk-ic-bdisp-1",
+ "clk-pp-dmu",
+ "clk-vid-dmu",
+ "clk-dss-lpc",
+ "clk-st231-aud-0",
+ "clk-st231-gp-1",
+ "clk-st231-dmu",
+ "clk-icn-lmi",
+ "clk-tx-icn-disp-1",
+ "clk-icn-sbc",
+ "clk-stfe-frc2",
+ "clk-eth-phy",
+ "clk-eth-ref-phyclk",
+ "clk-flash-promip",
+ "clk-main-disp",
+ "clk-aux-disp",
+ "clk-compo-dvp";
+ };
diff --git a/dts/Bindings/clock/st/st,quadfs.txt b/dts/Bindings/clock/st/st,quadfs.txt
index ec86d62ca2..cedeb9cc82 100644
--- a/dts/Bindings/clock/st/st,quadfs.txt
+++ b/dts/Bindings/clock/st/st,quadfs.txt
@@ -15,6 +15,9 @@ Required properties:
"st,stih416-quadfs432", "st,quadfs"
"st,stih416-quadfs660-E", "st,quadfs"
"st,stih416-quadfs660-F", "st,quadfs"
+ "st,stih407-quadfs660-C", "st,quadfs"
+ "st,stih407-quadfs660-D", "st,quadfs"
+
- #clock-cells : from common clock binding; shall be set to 1.
@@ -32,14 +35,14 @@ Required properties:
Example:
- CLOCKGEN_E: CLOCKGEN_E {
+ clockgen_e: clockgen-e@fd3208bc {
#clock-cells = <1>;
compatible = "st,stih416-quadfs660-E", "st,quadfs";
reg = <0xfd3208bc 0xB0>;
- clocks = <&CLK_SYSIN>;
- clock-output-names = "CLK_M_PIX_MDTP_0",
- "CLK_M_PIX_MDTP_1",
- "CLK_M_PIX_MDTP_2",
- "CLK_M_MPELPC";
+ clocks = <&clk_sysin>;
+ clock-output-names = "clk-m-pix-mdtp-0",
+ "clk-m-pix-mdtp-1",
+ "clk-m-pix-mdtp-2",
+ "clk-m-mpelpc";
};
diff --git a/dts/Bindings/clock/sunxi.txt b/dts/Bindings/clock/sunxi.txt
index b9ec668bfe..d3a5c3c6d6 100644
--- a/dts/Bindings/clock/sunxi.txt
+++ b/dts/Bindings/clock/sunxi.txt
@@ -9,11 +9,13 @@ Required properties:
"allwinner,sun4i-a10-osc-clk" - for a gatable oscillator
"allwinner,sun4i-a10-pll1-clk" - for the main PLL clock and PLL4
"allwinner,sun6i-a31-pll1-clk" - for the main PLL clock on A31
+ "allwinner,sun8i-a23-pll1-clk" - for the main PLL clock on A23
"allwinner,sun4i-a10-pll5-clk" - for the PLL5 clock
"allwinner,sun4i-a10-pll6-clk" - for the PLL6 clock
"allwinner,sun6i-a31-pll6-clk" - for the PLL6 clock on A31
"allwinner,sun4i-a10-cpu-clk" - for the CPU multiplexer clock
"allwinner,sun4i-a10-axi-clk" - for the AXI clock
+ "allwinner,sun8i-a23-axi-clk" - for the AXI clock on A23
"allwinner,sun4i-a10-axi-gates-clk" - for the AXI gates
"allwinner,sun4i-a10-ahb-clk" - for the AHB clock
"allwinner,sun4i-a10-ahb-gates-clk" - for the AHB gates on A10
@@ -23,13 +25,16 @@ Required properties:
"allwinner,sun6i-a31-ar100-clk" - for the AR100 on A31
"allwinner,sun6i-a31-ahb1-mux-clk" - for the AHB1 multiplexer on A31
"allwinner,sun6i-a31-ahb1-gates-clk" - for the AHB1 gates on A31
+ "allwinner,sun8i-a23-ahb1-gates-clk" - for the AHB1 gates on A23
"allwinner,sun4i-a10-apb0-clk" - for the APB0 clock
"allwinner,sun6i-a31-apb0-clk" - for the APB0 clock on A31
+ "allwinner,sun8i-a23-apb0-clk" - for the APB0 clock on A23
"allwinner,sun4i-a10-apb0-gates-clk" - for the APB0 gates on A10
"allwinner,sun5i-a13-apb0-gates-clk" - for the APB0 gates on A13
"allwinner,sun5i-a10s-apb0-gates-clk" - for the APB0 gates on A10s
"allwinner,sun6i-a31-apb0-gates-clk" - for the APB0 gates on A31
"allwinner,sun7i-a20-apb0-gates-clk" - for the APB0 gates on A20
+ "allwinner,sun8i-a23-apb0-gates-clk" - for the APB0 gates on A23
"allwinner,sun4i-a10-apb1-clk" - for the APB1 clock
"allwinner,sun4i-a10-apb1-mux-clk" - for the APB1 clock muxing
"allwinner,sun4i-a10-apb1-gates-clk" - for the APB1 gates on A10
@@ -37,8 +42,10 @@ Required properties:
"allwinner,sun5i-a10s-apb1-gates-clk" - for the APB1 gates on A10s
"allwinner,sun6i-a31-apb1-gates-clk" - for the APB1 gates on A31
"allwinner,sun7i-a20-apb1-gates-clk" - for the APB1 gates on A20
+ "allwinner,sun8i-a23-apb1-gates-clk" - for the APB1 gates on A23
"allwinner,sun6i-a31-apb2-div-clk" - for the APB2 gates on A31
"allwinner,sun6i-a31-apb2-gates-clk" - for the APB2 gates on A31
+ "allwinner,sun8i-a23-apb2-gates-clk" - for the APB2 gates on A23
"allwinner,sun4i-a10-mod0-clk" - for the module 0 family of clocks
"allwinner,sun7i-a20-out-clk" - for the external output clocks
"allwinner,sun7i-a20-gmac-clk" - for the GMAC clock module on A20/A31
diff --git a/dts/Bindings/crypto/amd-ccp.txt b/dts/Bindings/crypto/amd-ccp.txt
new file mode 100644
index 0000000000..8c61183b41
--- /dev/null
+++ b/dts/Bindings/crypto/amd-ccp.txt
@@ -0,0 +1,19 @@
+* AMD Cryptographic Coprocessor driver (ccp)
+
+Required properties:
+- compatible: Should be "amd,ccp-seattle-v1a"
+- reg: Address and length of the register set for the device
+- interrupt-parent: Should be the phandle for the interrupt controller
+ that services interrupts for this device
+- interrupts: Should contain the CCP interrupt
+
+Optional properties:
+- dma-coherent: Present if dma operations are coherent
+
+Example:
+ ccp@e0100000 {
+ compatible = "amd,ccp-seattle-v1a";
+ reg = <0 0xe0100000 0 0x10000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 3 4>;
+ };
diff --git a/dts/Bindings/crypto/qcom-qce.txt b/dts/Bindings/crypto/qcom-qce.txt
new file mode 100644
index 0000000000..fdd53b184b
--- /dev/null
+++ b/dts/Bindings/crypto/qcom-qce.txt
@@ -0,0 +1,25 @@
+Qualcomm crypto engine driver
+
+Required properties:
+
+- compatible : should be "qcom,crypto-v5.1"
+- reg : specifies base physical address and size of the registers map
+- clocks : phandle to clock-controller plus clock-specifier pair
+- clock-names : "iface" clocks register interface
+ "bus" clocks data transfer interface
+ "core" clocks rest of the crypto block
+- dmas : DMA specifiers for tx and rx dma channels. For more see
+ Documentation/devicetree/bindings/dma/dma.txt
+- dma-names : DMA request names should be "rx" and "tx"
+
+Example:
+ crypto@fd45a000 {
+ compatible = "qcom,crypto-v5.1";
+ reg = <0xfd45a000 0x6000>;
+ clocks = <&gcc GCC_CE2_AHB_CLK>,
+ <&gcc GCC_CE2_AXI_CLK>,
+ <&gcc GCC_CE2_CLK>;
+ clock-names = "iface", "bus", "core";
+ dmas = <&cryptobam 2>, <&cryptobam 3>;
+ dma-names = "rx", "tx";
+ };
diff --git a/dts/Bindings/dma/fsl-imx-sdma.txt b/dts/Bindings/dma/fsl-imx-sdma.txt
index e577196a12..4659fd9523 100644
--- a/dts/Bindings/dma/fsl-imx-sdma.txt
+++ b/dts/Bindings/dma/fsl-imx-sdma.txt
@@ -47,6 +47,7 @@ The full ID of peripheral types can be found below.
20 ASRC
21 ESAI
22 SSI Dual FIFO (needs firmware ver >= 2)
+ 23 Shared ASRC
The third cell specifies the transfer priority as below.
diff --git a/dts/Bindings/dma/mpc512x-dma.txt b/dts/Bindings/dma/mpc512x-dma.txt
new file mode 100644
index 0000000000..a6511df165
--- /dev/null
+++ b/dts/Bindings/dma/mpc512x-dma.txt
@@ -0,0 +1,29 @@
+* Freescale MPC512x and MPC8308 DMA Controller
+
+The DMA controller in Freescale MPC512x and MPC8308 SoCs can move
+blocks of memory contents between memory and peripherals or
+from memory to memory.
+
+Refer to "Generic DMA Controller and DMA request bindings" in
+the dma/dma.txt file for a more detailed description of binding.
+
+Required properties:
+- compatible: should be "fsl,mpc5121-dma" or "fsl,mpc8308-dma";
+- reg: should contain the DMA controller registers location and length;
+- interrupt for the DMA controller: syntax of interrupt client node
+ is described in interrupt-controller/interrupts.txt file.
+- #dma-cells: the length of the DMA specifier, must be <1>.
+ Each channel of this DMA controller has a peripheral request line,
+ the assignment is fixed in hardware. This one cell
+ in dmas property of a client device represents the channel number.
+
+Example:
+
+ dma0: dma@14000 {
+ compatible = "fsl,mpc5121-dma";
+ reg = <0x14000 0x1800>;
+ interrupts = <65 0x8>;
+ #dma-cells = <1>;
+ };
+
+DMA clients must use the format described in dma/dma.txt file.
diff --git a/dts/Bindings/dma/nbpfaxi.txt b/dts/Bindings/dma/nbpfaxi.txt
new file mode 100644
index 0000000000..d5e2522b9e
--- /dev/null
+++ b/dts/Bindings/dma/nbpfaxi.txt
@@ -0,0 +1,61 @@
+* Renesas "Type-AXI" NBPFAXI* DMA controllers
+
+* DMA controller
+
+Required properties
+
+- compatible: must be one of
+ "renesas,nbpfaxi64dmac1b4"
+ "renesas,nbpfaxi64dmac1b8"
+ "renesas,nbpfaxi64dmac1b16"
+ "renesas,nbpfaxi64dmac4b4"
+ "renesas,nbpfaxi64dmac4b8"
+ "renesas,nbpfaxi64dmac4b16"
+ "renesas,nbpfaxi64dmac8b4"
+ "renesas,nbpfaxi64dmac8b8"
+ "renesas,nbpfaxi64dmac8b16"
+- #dma-cells: must be 2: the first integer is a terminal number, to which this
+ slave is connected, the second one is flags. Flags is a bitmask
+ with the following bits defined:
+
+#define NBPF_SLAVE_RQ_HIGH 1
+#define NBPF_SLAVE_RQ_LOW 2
+#define NBPF_SLAVE_RQ_LEVEL 4
+
+Optional properties:
+
+You can use dma-channels and dma-requests as described in dma.txt, although they
+won't be used, this information is derived from the compatibility string.
+
+Example:
+
+ dma: dma-controller@48000000 {
+ compatible = "renesas,nbpfaxi64dmac8b4";
+ reg = <0x48000000 0x400>;
+ interrupts = <0 12 0x4
+ 0 13 0x4
+ 0 14 0x4
+ 0 15 0x4
+ 0 16 0x4
+ 0 17 0x4
+ 0 18 0x4
+ 0 19 0x4>;
+ #dma-cells = <2>;
+ dma-channels = <8>;
+ dma-requests = <8>;
+ };
+
+* DMA client
+
+Required properties:
+
+dmas and dma-names are required, as described in dma.txt.
+
+Example:
+
+#include <dt-bindings/dma/nbpfaxi.h>
+
+...
+ dmas = <&dma 0 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)
+ &dma 1 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)>;
+ dma-names = "rx", "tx";
diff --git a/dts/Bindings/dma/rcar-audmapp.txt b/dts/Bindings/dma/rcar-audmapp.txt
new file mode 100644
index 0000000000..9f1d750d76
--- /dev/null
+++ b/dts/Bindings/dma/rcar-audmapp.txt
@@ -0,0 +1,29 @@
+* R-Car Audio DMAC peri peri Device Tree bindings
+
+Required properties:
+- compatible: should be "renesas,rcar-audmapp"
+- #dma-cells: should be <1>, see "dmas" property below
+
+Example:
+ audmapp: audio-dma-pp@0xec740000 {
+ compatible = "renesas,rcar-audmapp";
+ #dma-cells = <1>;
+
+ reg = <0 0xec740000 0 0x200>;
+ };
+
+
+* DMA client
+
+Required properties:
+- dmas: a list of <[DMA multiplexer phandle] [SRS/DRS value]> pairs,
+ where SRS/DRS values are fixed handles, specified in the SoC
+ manual as the value that would be written into the PDMACHCR.
+- dma-names: a list of DMA channel names, one per "dmas" entry
+
+Example:
+
+ dmas = <&audmapp 0x2d00
+ &audmapp 0x3700>;
+ dma-names = "src0_ssiu0",
+ "dvc0_ssiu0";
diff --git a/dts/Bindings/dma/renesas,rcar-dmac.txt b/dts/Bindings/dma/renesas,rcar-dmac.txt
new file mode 100644
index 0000000000..df0f48bcf7
--- /dev/null
+++ b/dts/Bindings/dma/renesas,rcar-dmac.txt
@@ -0,0 +1,98 @@
+* Renesas R-Car DMA Controller Device Tree bindings
+
+Renesas R-Car Generation 2 SoCs have have multiple multi-channel DMA
+controller instances named DMAC capable of serving multiple clients. Channels
+can be dedicated to specific clients or shared between a large number of
+clients.
+
+DMA clients are connected to the DMAC ports referenced by an 8-bit identifier
+called MID/RID.
+
+Each DMA client is connected to one dedicated port of the DMAC, identified by
+an 8-bit port number called the MID/RID. A DMA controller can thus serve up to
+256 clients in total. When the number of hardware channels is lower than the
+number of clients to be served, channels must be shared between multiple DMA
+clients. The association of DMA clients to DMAC channels is fully dynamic and
+not described in these device tree bindings.
+
+Required Properties:
+
+- compatible: must contain "renesas,rcar-dmac"
+
+- reg: base address and length of the registers block for the DMAC
+
+- interrupts: interrupt specifiers for the DMAC, one for each entry in
+ interrupt-names.
+- interrupt-names: one entry per channel, named "ch%u", where %u is the
+ channel number ranging from zero to the number of channels minus one.
+
+- clock-names: "fck" for the functional clock
+- clocks: a list of phandle + clock-specifier pairs, one for each entry
+ in clock-names.
+- clock-names: must contain "fck" for the functional clock.
+
+- #dma-cells: must be <1>, the cell specifies the MID/RID of the DMAC port
+ connected to the DMA client
+- dma-channels: number of DMA channels
+
+Example: R8A7790 (R-Car H2) SYS-DMACs
+
+ dmac0: dma-controller@e6700000 {
+ compatible = "renesas,rcar-dmac";
+ reg = <0 0xe6700000 0 0x20000>;
+ interrupts = <0 197 IRQ_TYPE_LEVEL_HIGH
+ 0 200 IRQ_TYPE_LEVEL_HIGH
+ 0 201 IRQ_TYPE_LEVEL_HIGH
+ 0 202 IRQ_TYPE_LEVEL_HIGH
+ 0 203 IRQ_TYPE_LEVEL_HIGH
+ 0 204 IRQ_TYPE_LEVEL_HIGH
+ 0 205 IRQ_TYPE_LEVEL_HIGH
+ 0 206 IRQ_TYPE_LEVEL_HIGH
+ 0 207 IRQ_TYPE_LEVEL_HIGH
+ 0 208 IRQ_TYPE_LEVEL_HIGH
+ 0 209 IRQ_TYPE_LEVEL_HIGH
+ 0 210 IRQ_TYPE_LEVEL_HIGH
+ 0 211 IRQ_TYPE_LEVEL_HIGH
+ 0 212 IRQ_TYPE_LEVEL_HIGH
+ 0 213 IRQ_TYPE_LEVEL_HIGH
+ 0 214 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14";
+ clocks = <&mstp2_clks R8A7790_CLK_SYS_DMAC0>;
+ clock-names = "fck";
+ #dma-cells = <1>;
+ dma-channels = <15>;
+ };
+
+ dmac1: dma-controller@e6720000 {
+ compatible = "renesas,rcar-dmac";
+ reg = <0 0xe6720000 0 0x20000>;
+ interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH
+ 0 216 IRQ_TYPE_LEVEL_HIGH
+ 0 217 IRQ_TYPE_LEVEL_HIGH
+ 0 218 IRQ_TYPE_LEVEL_HIGH
+ 0 219 IRQ_TYPE_LEVEL_HIGH
+ 0 308 IRQ_TYPE_LEVEL_HIGH
+ 0 309 IRQ_TYPE_LEVEL_HIGH
+ 0 310 IRQ_TYPE_LEVEL_HIGH
+ 0 311 IRQ_TYPE_LEVEL_HIGH
+ 0 312 IRQ_TYPE_LEVEL_HIGH
+ 0 313 IRQ_TYPE_LEVEL_HIGH
+ 0 314 IRQ_TYPE_LEVEL_HIGH
+ 0 315 IRQ_TYPE_LEVEL_HIGH
+ 0 316 IRQ_TYPE_LEVEL_HIGH
+ 0 317 IRQ_TYPE_LEVEL_HIGH
+ 0 318 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14";
+ clocks = <&mstp2_clks R8A7790_CLK_SYS_DMAC1>;
+ clock-names = "fck";
+ #dma-cells = <1>;
+ dma-channels = <15>;
+ };
diff --git a/dts/Bindings/dma/ste-dma40.txt b/dts/Bindings/dma/ste-dma40.txt
index 1f5729f106..95800ab37b 100644
--- a/dts/Bindings/dma/ste-dma40.txt
+++ b/dts/Bindings/dma/ste-dma40.txt
@@ -35,9 +35,11 @@ Required properties:
Each dmas request consists of 4 cells:
1. A phandle pointing to the DMA controller
- 2. Device Type
+ 2. Device signal number, the signal line for single and burst requests
+ connected from the device to the DMA40 engine
3. The DMA request line number (only when 'use fixed channel' is set)
- 4. A 32bit mask specifying; mode, direction and endianness [NB: This list will grow]
+ 4. A 32bit mask specifying; mode, direction and endianness
+ [NB: This list will grow]
0x00000001: Mode:
Logical channel when unset
Physical channel when set
@@ -54,6 +56,74 @@ Each dmas request consists of 4 cells:
Normal priority when unset
High priority when set
+Existing signal numbers for the DB8500 ASIC. Unless specified, the signals are
+bidirectional, i.e. the same for RX and TX operations:
+
+0: SPI controller 0
+1: SD/MMC controller 0 (unused)
+2: SD/MMC controller 1 (unused)
+3: SD/MMC controller 2 (unused)
+4: I2C port 1
+5: I2C port 3
+6: I2C port 2
+7: I2C port 4
+8: Synchronous Serial Port SSP0
+9: Synchronous Serial Port SSP1
+10: Multi-Channel Display Engine MCDE RX
+11: UART port 2
+12: UART port 1
+13: UART port 0
+14: Multirate Serial Port MSP2
+15: I2C port 0
+16: USB OTG in/out endpoints 7 & 15
+17: USB OTG in/out endpoints 6 & 14
+18: USB OTG in/out endpoints 5 & 13
+19: USB OTG in/out endpoints 4 & 12
+20: SLIMbus or HSI channel 0
+21: SLIMbus or HSI channel 1
+22: SLIMbus or HSI channel 2
+23: SLIMbus or HSI channel 3
+24: Multimedia DSP SXA0
+25: Multimedia DSP SXA1
+26: Multimedia DSP SXA2
+27: Multimedia DSP SXA3
+28: SD/MM controller 2
+29: SD/MM controller 0
+30: MSP port 1 on DB8500 v1, MSP port 3 on DB8500 v2
+31: MSP port 0 or SLIMbus channel 0
+32: SD/MM controller 1
+33: SPI controller 2
+34: i2c3 RX2 TX2
+35: SPI controller 1
+36: USB OTG in/out endpoints 3 & 11
+37: USB OTG in/out endpoints 2 & 10
+38: USB OTG in/out endpoints 1 & 9
+39: USB OTG in/out endpoints 8
+40: SPI controller 3
+41: SD/MM controller 3
+42: SD/MM controller 4
+43: SD/MM controller 5
+44: Multimedia DSP SXA4
+45: Multimedia DSP SXA5
+46: SLIMbus channel 8 or Multimedia DSP SXA6
+47: SLIMbus channel 9 or Multimedia DSP SXA7
+48: Crypto Accelerator 1
+49: Crypto Accelerator 1 TX or Hash Accelerator 1 TX
+50: Hash Accelerator 1 TX
+51: memcpy TX (to be used by the DMA driver for memcpy operations)
+52: SLIMbus or HSI channel 4
+53: SLIMbus or HSI channel 5
+54: SLIMbus or HSI channel 6
+55: SLIMbus or HSI channel 7
+56: memcpy (to be used by the DMA driver for memcpy operations)
+57: memcpy (to be used by the DMA driver for memcpy operations)
+58: memcpy (to be used by the DMA driver for memcpy operations)
+59: memcpy (to be used by the DMA driver for memcpy operations)
+60: memcpy (to be used by the DMA driver for memcpy operations)
+61: Crypto Accelerator 0
+62: Crypto Accelerator 0 TX or Hash Accelerator 0 TX
+63: Hash Accelerator 0 TX
+
Example:
uart@80120000 {
diff --git a/dts/Bindings/dma/sun6i-dma.txt b/dts/Bindings/dma/sun6i-dma.txt
new file mode 100644
index 0000000000..3e145c1675
--- /dev/null
+++ b/dts/Bindings/dma/sun6i-dma.txt
@@ -0,0 +1,45 @@
+Allwinner A31 DMA Controller
+
+This driver follows the generic DMA bindings defined in dma.txt.
+
+Required properties:
+
+- compatible: Must be "allwinner,sun6i-a31-dma"
+- reg: Should contain the registers base address and length
+- interrupts: Should contain a reference to the interrupt used by this device
+- clocks: Should contain a reference to the parent AHB clock
+- resets: Should contain a reference to the reset controller asserting
+ this device in reset
+- #dma-cells : Should be 1, a single cell holding a line request number
+
+Example:
+ dma: dma-controller@01c02000 {
+ compatible = "allwinner,sun6i-a31-dma";
+ reg = <0x01c02000 0x1000>;
+ interrupts = <0 50 4>;
+ clocks = <&ahb1_gates 6>;
+ resets = <&ahb1_rst 6>;
+ #dma-cells = <1>;
+ };
+
+Clients:
+
+DMA clients connected to the A31 DMA controller must use the format
+described in the dma.txt file, using a two-cell specifier for each
+channel: a phandle plus one integer cells.
+The two cells in order are:
+
+1. A phandle pointing to the DMA controller.
+2. The port ID as specified in the datasheet
+
+Example:
+spi2: spi@01c6a000 {
+ compatible = "allwinner,sun6i-a31-spi";
+ reg = <0x01c6a000 0x1000>;
+ interrupts = <0 67 4>;
+ clocks = <&ahb1_gates 22>, <&spi2_clk>;
+ clock-names = "ahb", "mod";
+ dmas = <&dma 25>, <&dma 25>;
+ dma-names = "rx", "tx";
+ resets = <&ahb1_rst 22>;
+};
diff --git a/dts/Bindings/drm/armada/marvell,dove-lcd.txt b/dts/Bindings/drm/armada/marvell,dove-lcd.txt
new file mode 100644
index 0000000000..46525ea3e6
--- /dev/null
+++ b/dts/Bindings/drm/armada/marvell,dove-lcd.txt
@@ -0,0 +1,30 @@
+Device Tree bindings for Armada DRM CRTC driver
+
+Required properties:
+ - compatible: value should be "marvell,dove-lcd".
+ - reg: base address and size of the LCD controller
+ - interrupts: single interrupt number for the LCD controller
+ - port: video output port with endpoints, as described by graph.txt
+
+Optional properties:
+
+ - clocks: as described by clock-bindings.txt
+ - clock-names: as described by clock-bindings.txt
+ "axiclk" - axi bus clock for pixel clock
+ "plldivider" - pll divider clock for pixel clock
+ "ext_ref_clk0" - external clock 0 for pixel clock
+ "ext_ref_clk1" - external clock 1 for pixel clock
+
+Note: all clocks are optional but at least one must be specified.
+Further clocks may be added in the future according to requirements of
+different SoCs.
+
+Example:
+
+ lcd0: lcd-controller@820000 {
+ compatible = "marvell,dove-lcd";
+ reg = <0x820000 0x1000>;
+ interrupts = <47>;
+ clocks = <&si5351 0>;
+ clock-names = "ext_ref_clk_1";
+ };
diff --git a/dts/Bindings/drm/i2c/tda998x.txt b/dts/Bindings/drm/i2c/tda998x.txt
index d7df01c5bb..e9e4bce407 100644
--- a/dts/Bindings/drm/i2c/tda998x.txt
+++ b/dts/Bindings/drm/i2c/tda998x.txt
@@ -3,6 +3,8 @@ Device-Tree bindings for the NXP TDA998x HDMI transmitter
Required properties;
- compatible: must be "nxp,tda998x"
+ - reg: I2C address
+
Optional properties:
- interrupts: interrupt number and trigger type
default: polling
diff --git a/dts/Bindings/drm/msm/gpu.txt b/dts/Bindings/drm/msm/gpu.txt
new file mode 100644
index 0000000000..67d0a58dbb
--- /dev/null
+++ b/dts/Bindings/drm/msm/gpu.txt
@@ -0,0 +1,52 @@
+Qualcomm adreno/snapdragon GPU
+
+Required properties:
+- compatible: "qcom,adreno-3xx"
+- reg: Physical base address and length of the controller's registers.
+- interrupts: The interrupt signal from the gpu.
+- clocks: device clocks
+ See ../clocks/clock-bindings.txt for details.
+- clock-names: the following clocks are required:
+ * "core_clk"
+ * "iface_clk"
+ * "mem_iface_clk"
+- qcom,chipid: gpu chip-id. Note this may become optional for future
+ devices if we can reliably read the chipid from hw
+- qcom,gpu-pwrlevels: list of operating points
+ - compatible: "qcom,gpu-pwrlevels"
+ - for each qcom,gpu-pwrlevel:
+ - qcom,gpu-freq: requested gpu clock speed
+ - NOTE: downstream android driver defines additional parameters to
+ configure memory bandwidth scaling per OPP.
+
+Example:
+
+/ {
+ ...
+
+ gpu: qcom,kgsl-3d0@4300000 {
+ compatible = "qcom,adreno-3xx";
+ reg = <0x04300000 0x20000>;
+ reg-names = "kgsl_3d0_reg_memory";
+ interrupts = <GIC_SPI 80 0>;
+ interrupt-names = "kgsl_3d0_irq";
+ clock-names =
+ "core_clk",
+ "iface_clk",
+ "mem_iface_clk";
+ clocks =
+ <&mmcc GFX3D_CLK>,
+ <&mmcc GFX3D_AHB_CLK>,
+ <&mmcc MMSS_IMEM_AHB_CLK>;
+ qcom,chipid = <0x03020100>;
+ qcom,gpu-pwrlevels {
+ compatible = "qcom,gpu-pwrlevels";
+ qcom,gpu-pwrlevel@0 {
+ qcom,gpu-freq = <450000000>;
+ };
+ qcom,gpu-pwrlevel@1 {
+ qcom,gpu-freq = <27000000>;
+ };
+ };
+ };
+};
diff --git a/dts/Bindings/drm/msm/hdmi.txt b/dts/Bindings/drm/msm/hdmi.txt
new file mode 100644
index 0000000000..aca917fe2b
--- /dev/null
+++ b/dts/Bindings/drm/msm/hdmi.txt
@@ -0,0 +1,46 @@
+Qualcomm adreno/snapdragon hdmi output
+
+Required properties:
+- compatible: one of the following
+ * "qcom,hdmi-tx-8660"
+ * "qcom,hdmi-tx-8960"
+- reg: Physical base address and length of the controller's registers
+- reg-names: "core_physical"
+- interrupts: The interrupt signal from the hdmi block.
+- clocks: device clocks
+ See ../clocks/clock-bindings.txt for details.
+- qcom,hdmi-tx-ddc-clk-gpio: ddc clk pin
+- qcom,hdmi-tx-ddc-data-gpio: ddc data pin
+- qcom,hdmi-tx-hpd-gpio: hpd pin
+- core-vdda-supply: phandle to supply regulator
+- hdmi-mux-supply: phandle to mux regulator
+
+Optional properties:
+- qcom,hdmi-tx-mux-en-gpio: hdmi mux enable pin
+- qcom,hdmi-tx-mux-sel-gpio: hdmi mux select pin
+
+Example:
+
+/ {
+ ...
+
+ hdmi: qcom,hdmi-tx-8960@4a00000 {
+ compatible = "qcom,hdmi-tx-8960";
+ reg-names = "core_physical";
+ reg = <0x04a00000 0x1000>;
+ interrupts = <GIC_SPI 79 0>;
+ clock-names =
+ "core_clk",
+ "master_iface_clk",
+ "slave_iface_clk";
+ clocks =
+ <&mmcc HDMI_APP_CLK>,
+ <&mmcc HDMI_M_AHB_CLK>,
+ <&mmcc HDMI_S_AHB_CLK>;
+ qcom,hdmi-tx-ddc-clk = <&msmgpio 70 GPIO_ACTIVE_HIGH>;
+ qcom,hdmi-tx-ddc-data = <&msmgpio 71 GPIO_ACTIVE_HIGH>;
+ qcom,hdmi-tx-hpd = <&msmgpio 72 GPIO_ACTIVE_HIGH>;
+ core-vdda-supply = <&pm8921_hdmi_mvs>;
+ hdmi-mux-supply = <&ext_3p3v>;
+ };
+};
diff --git a/dts/Bindings/drm/msm/mdp.txt b/dts/Bindings/drm/msm/mdp.txt
new file mode 100644
index 0000000000..1a0598e527
--- /dev/null
+++ b/dts/Bindings/drm/msm/mdp.txt
@@ -0,0 +1,48 @@
+Qualcomm adreno/snapdragon display controller
+
+Required properties:
+- compatible:
+ * "qcom,mdp" - mdp4
+- reg: Physical base address and length of the controller's registers.
+- interrupts: The interrupt signal from the display controller.
+- connectors: array of phandles for output device(s)
+- clocks: device clocks
+ See ../clocks/clock-bindings.txt for details.
+- clock-names: the following clocks are required:
+ * "core_clk"
+ * "iface_clk"
+ * "lut_clk"
+ * "src_clk"
+ * "hdmi_clk"
+ * "mpd_clk"
+
+Optional properties:
+- gpus: phandle for gpu device
+
+Example:
+
+/ {
+ ...
+
+ mdp: qcom,mdp@5100000 {
+ compatible = "qcom,mdp";
+ reg = <0x05100000 0xf0000>;
+ interrupts = <GIC_SPI 75 0>;
+ connectors = <&hdmi>;
+ gpus = <&gpu>;
+ clock-names =
+ "core_clk",
+ "iface_clk",
+ "lut_clk",
+ "src_clk",
+ "hdmi_clk",
+ "mdp_clk";
+ clocks =
+ <&mmcc MDP_SRC>,
+ <&mmcc MDP_AHB_CLK>,
+ <&mmcc MDP_LUT_CLK>,
+ <&mmcc TV_SRC>,
+ <&mmcc HDMI_TV_CLK>,
+ <&mmcc MDP_TV_CLK>;
+ };
+};
diff --git a/dts/Bindings/extcon/extcon-sm5502.txt b/dts/Bindings/extcon/extcon-sm5502.txt
new file mode 100644
index 0000000000..4ecda22495
--- /dev/null
+++ b/dts/Bindings/extcon/extcon-sm5502.txt
@@ -0,0 +1,23 @@
+
+* SM5502 MUIC (Micro-USB Interface Controller) device
+
+The Silicon Mitus SM5502 is a MUIC (Micro-USB Interface Controller) device
+which can detect the state of external accessory when external accessory is
+attached or detached and button is pressed or released. It is interfaced to
+the host controller using an I2C interface.
+
+Required properties:
+- compatible: Should be "siliconmitus,sm5502-muic"
+- reg: Specifies the I2C slave address of the MUIC block. It should be 0x25
+- interrupt-parent: Specifies the phandle of the interrupt controller to which
+ the interrupts from sm5502 are delivered to.
+- interrupts: Interrupt specifiers for detection interrupt sources.
+
+Example:
+
+ sm5502@25 {
+ compatible = "siliconmitus,sm5502-muic";
+ interrupt-parent = <&gpx1>;
+ interrupts = <5 0>;
+ reg = <0x25>;
+ };
diff --git a/dts/Bindings/fuse/nvidia,tegra20-fuse.txt b/dts/Bindings/fuse/nvidia,tegra20-fuse.txt
new file mode 100644
index 0000000000..d8c98c7614
--- /dev/null
+++ b/dts/Bindings/fuse/nvidia,tegra20-fuse.txt
@@ -0,0 +1,40 @@
+NVIDIA Tegra20/Tegra30/Tegr114/Tegra124 fuse block.
+
+Required properties:
+- compatible : should be:
+ "nvidia,tegra20-efuse"
+ "nvidia,tegra30-efuse"
+ "nvidia,tegra114-efuse"
+ "nvidia,tegra124-efuse"
+ Details:
+ nvidia,tegra20-efuse: Tegra20 requires using APB DMA to read the fuse data
+ due to a hardware bug. Tegra20 also lacks certain information which is
+ available in later generations such as fab code, lot code, wafer id,..
+ nvidia,tegra30-efuse, nvidia,tegra114-efuse and nvidia,tegra124-efuse:
+ The differences between these SoCs are the size of the efuse array,
+ the location of the spare (OEM programmable) bits and the location of
+ the speedo data.
+- reg: Should contain 1 entry: the entry gives the physical address and length
+ of the fuse registers.
+- clocks: Must contain an entry for each entry in clock-names.
+ See ../clocks/clock-bindings.txt for details.
+- clock-names: Must include the following entries:
+ - fuse
+- resets: Must contain an entry for each entry in reset-names.
+ See ../reset/reset.txt for details.
+- reset-names: Must include the following entries:
+ - fuse
+
+Example:
+
+ fuse@7000f800 {
+ compatible = "nvidia,tegra20-efuse";
+ reg = <0x7000F800 0x400>,
+ <0x70000000 0x400>;
+ clocks = <&tegra_car TEGRA20_CLK_FUSE>;
+ clock-names = "fuse";
+ resets = <&tegra_car 39>;
+ reset-names = "fuse";
+ };
+
+
diff --git a/dts/Bindings/gpio/gpio-zynq.txt b/dts/Bindings/gpio/gpio-zynq.txt
new file mode 100644
index 0000000000..986371a4be
--- /dev/null
+++ b/dts/Bindings/gpio/gpio-zynq.txt
@@ -0,0 +1,26 @@
+Xilinx Zynq GPIO controller Device Tree Bindings
+-------------------------------------------
+
+Required properties:
+- #gpio-cells : Should be two
+ - First cell is the GPIO line number
+ - Second cell is used to specify optional
+ parameters (unused)
+- compatible : Should be "xlnx,zynq-gpio-1.0"
+- clocks : Clock specifier (see clock bindings for details)
+- gpio-controller : Marks the device node as a GPIO controller.
+- interrupts : Interrupt specifier (see interrupt bindings for
+ details)
+- interrupt-parent : Must be core interrupt controller
+- reg : Address and length of the register set for the device
+
+Example:
+ gpio@e000a000 {
+ #gpio-cells = <2>;
+ compatible = "xlnx,zynq-gpio-1.0";
+ clocks = <&clkc 42>;
+ gpio-controller;
+ interrupt-parent = <&intc>;
+ interrupts = <0 20 4>;
+ reg = <0xe000a000 0x1000>;
+ };
diff --git a/dts/Bindings/gpu/nvidia,gk20a.txt b/dts/Bindings/gpu/nvidia,gk20a.txt
new file mode 100644
index 0000000000..23bfe8e1f7
--- /dev/null
+++ b/dts/Bindings/gpu/nvidia,gk20a.txt
@@ -0,0 +1,43 @@
+NVIDIA GK20A Graphics Processing Unit
+
+Required properties:
+- compatible: "nvidia,<chip>-<gpu>"
+ Currently recognized values:
+ - nvidia,tegra124-gk20a
+- reg: Physical base address and length of the controller's registers.
+ Must contain two entries:
+ - first entry for bar0
+ - second entry for bar1
+- interrupts: Must contain an entry for each entry in interrupt-names.
+ See ../interrupt-controller/interrupts.txt for details.
+- interrupt-names: Must include the following entries:
+ - stall
+ - nonstall
+- vdd-supply: regulator for supply voltage.
+- clocks: Must contain an entry for each entry in clock-names.
+ See ../clocks/clock-bindings.txt for details.
+- clock-names: Must include the following entries:
+ - gpu
+ - pwr
+- resets: Must contain an entry for each entry in reset-names.
+ See ../reset/reset.txt for details.
+- reset-names: Must include the following entries:
+ - gpu
+
+Example:
+
+ gpu@0,57000000 {
+ compatible = "nvidia,gk20a";
+ reg = <0x0 0x57000000 0x0 0x01000000>,
+ <0x0 0x58000000 0x0 0x01000000>;
+ interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "stall", "nonstall";
+ vdd-supply = <&vdd_gpu>;
+ clocks = <&tegra_car TEGRA124_CLK_GPU>,
+ <&tegra_car TEGRA124_CLK_PLL_P_OUT5>;
+ clock-names = "gpu", "pwr";
+ resets = <&tegra_car 184>;
+ reset-names = "gpu";
+ status = "disabled";
+ };
diff --git a/dts/Bindings/gpu/st,stih4xx.txt b/dts/Bindings/gpu/st,stih4xx.txt
new file mode 100644
index 0000000000..2d150c311a
--- /dev/null
+++ b/dts/Bindings/gpu/st,stih4xx.txt
@@ -0,0 +1,189 @@
+STMicroelectronics stih4xx platforms
+
+- sti-vtg: video timing generator
+ Required properties:
+ - compatible: "st,vtg"
+ - reg: Physical base address of the IP registers and length of memory mapped region.
+ Optional properties:
+ - interrupts : VTG interrupt number to the CPU.
+ - st,slave: phandle on a slave vtg
+
+- sti-vtac: video timing advanced inter dye communication Rx and TX
+ Required properties:
+ - compatible: "st,vtac-main" or "st,vtac-aux"
+ - reg: Physical base address of the IP registers and length of memory mapped region.
+ - clocks: from common clock binding: handle hardware IP needed clocks, the
+ number of clocks may depend of the SoC type.
+ See ../clocks/clock-bindings.txt for details.
+ - clock-names: names of the clocks listed in clocks property in the same
+ order.
+
+- sti-display-subsystem: Master device for DRM sub-components
+ This device must be the parent of all the sub-components and is responsible
+ of bind them.
+ Required properties:
+ - compatible: "st,sti-display-subsystem"
+ - ranges: to allow probing of subdevices
+
+- sti-compositor: frame compositor engine
+ must be a child of sti-display-subsystem
+ Required properties:
+ - compatible: "st,stih<chip>-compositor"
+ - reg: Physical base address of the IP registers and length of memory mapped region.
+ - clocks: from common clock binding: handle hardware IP needed clocks, the
+ number of clocks may depend of the SoC type.
+ See ../clocks/clock-bindings.txt for details.
+ - clock-names: names of the clocks listed in clocks property in the same
+ order.
+ - resets: resets to be used by the device
+ See ../reset/reset.txt for details.
+ - reset-names: names of the resets listed in resets property in the same
+ order.
+ - st,vtg: phandle(s) on vtg device (main and aux) nodes.
+
+- sti-tvout: video out hardware block
+ must be a child of sti-display-subsystem
+ Required properties:
+ - compatible: "st,stih<chip>-tvout"
+ - reg: Physical base address of the IP registers and length of memory mapped region.
+ - reg-names: names of the mapped memory regions listed in regs property in
+ the same order.
+ - resets: resets to be used by the device
+ See ../reset/reset.txt for details.
+ - reset-names: names of the resets listed in resets property in the same
+ order.
+ - ranges: to allow probing of subdevices
+
+- sti-hdmi: hdmi output block
+ must be a child of sti-tvout
+ Required properties:
+ - compatible: "st,stih<chip>-hdmi";
+ - reg: Physical base address of the IP registers and length of memory mapped region.
+ - reg-names: names of the mapped memory regions listed in regs property in
+ the same order.
+ - interrupts : HDMI interrupt number to the CPU.
+ - interrupt-names: name of the interrupts listed in interrupts property in
+ the same order
+ - clocks: from common clock binding: handle hardware IP needed clocks, the
+ number of clocks may depend of the SoC type.
+ - clock-names: names of the clocks listed in clocks property in the same
+ order.
+ - hdmi,hpd-gpio: gpio id to detect if an hdmi cable is plugged or not.
+
+sti-hda:
+ Required properties:
+ must be a child of sti-tvout
+ - compatible: "st,stih<chip>-hda"
+ - reg: Physical base address of the IP registers and length of memory mapped region.
+ - reg-names: names of the mapped memory regions listed in regs property in
+ the same order.
+ - clocks: from common clock binding: handle hardware IP needed clocks, the
+ number of clocks may depend of the SoC type.
+ See ../clocks/clock-bindings.txt for details.
+ - clock-names: names of the clocks listed in clocks property in the same
+ order.
+
+Example:
+
+/ {
+ ...
+
+ vtg_main_slave: sti-vtg-main-slave@fe85A800 {
+ compatible = "st,vtg";
+ reg = <0xfe85A800 0x300>;
+ interrupts = <GIC_SPI 175 IRQ_TYPE_NONE>;
+ };
+
+ vtg_main: sti-vtg-main-master@fd348000 {
+ compatible = "st,vtg";
+ reg = <0xfd348000 0x400>;
+ st,slave = <&vtg_main_slave>;
+ };
+
+ vtg_aux_slave: sti-vtg-aux-slave@fd348400 {
+ compatible = "st,vtg";
+ reg = <0xfe858200 0x300>;
+ interrupts = <GIC_SPI 176 IRQ_TYPE_NONE>;
+ };
+
+ vtg_aux: sti-vtg-aux-master@fd348400 {
+ compatible = "st,vtg";
+ reg = <0xfd348400 0x400>;
+ st,slave = <&vtg_aux_slave>;
+ };
+
+
+ sti-vtac-rx-main@fee82800 {
+ compatible = "st,vtac-main";
+ reg = <0xfee82800 0x200>;
+ clock-names = "vtac";
+ clocks = <&clk_m_a2_div0 CLK_M_VTAC_MAIN_PHY>;
+ };
+
+ sti-vtac-rx-aux@fee82a00 {
+ compatible = "st,vtac-aux";
+ reg = <0xfee82a00 0x200>;
+ clock-names = "vtac";
+ clocks = <&clk_m_a2_div0 CLK_M_VTAC_AUX_PHY>;
+ };
+
+ sti-vtac-tx-main@fd349000 {
+ compatible = "st,vtac-main";
+ reg = <0xfd349000 0x200>, <0xfd320000 0x10000>;
+ clock-names = "vtac";
+ clocks = <&clk_s_a1_hs CLK_S_VTAC_TX_PHY>;
+ };
+
+ sti-vtac-tx-aux@fd349200 {
+ compatible = "st,vtac-aux";
+ reg = <0xfd349200 0x200>, <0xfd320000 0x10000>;
+ clock-names = "vtac";
+ clocks = <&clk_s_a1_hs CLK_S_VTAC_TX_PHY>;
+ };
+
+ sti-display-subsystem {
+ compatible = "st,sti-display-subsystem";
+ ranges;
+
+ sti-compositor@fd340000 {
+ compatible = "st,stih416-compositor";
+ reg = <0xfd340000 0x1000>;
+ clock-names = "compo_main", "compo_aux",
+ "pix_main", "pix_aux";
+ clocks = <&clk_m_a2_div1 CLK_M_COMPO_MAIN>, <&clk_m_a2_div1 CLK_M_COMPO_AUX>,
+ <&clockgen_c_vcc CLK_S_PIX_MAIN>, <&clockgen_c_vcc CLK_S_PIX_AUX>;
+ reset-names = "compo-main", "compo-aux";
+ resets = <&softreset STIH416_COMPO_M_SOFTRESET>, <&softreset STIH416_COMPO_A_SOFTRESET>;
+ st,vtg = <&vtg_main>, <&vtg_aux>;
+ };
+
+ sti-tvout@fe000000 {
+ compatible = "st,stih416-tvout";
+ reg = <0xfe000000 0x1000>, <0xfe85a000 0x400>, <0xfe830000 0x10000>;
+ reg-names = "tvout-reg", "hda-reg", "syscfg";
+ reset-names = "tvout";
+ resets = <&softreset STIH416_HDTVOUT_SOFTRESET>;
+ ranges;
+
+ sti-hdmi@fe85c000 {
+ compatible = "st,stih416-hdmi";
+ reg = <0xfe85c000 0x1000>, <0xfe830000 0x10000>;
+ reg-names = "hdmi-reg", "syscfg";
+ interrupts = <GIC_SPI 173 IRQ_TYPE_NONE>;
+ interrupt-names = "irq";
+ clock-names = "pix", "tmds", "phy", "audio";
+ clocks = <&clockgen_c_vcc CLK_S_PIX_HDMI>, <&clockgen_c_vcc CLK_S_TMDS_HDMI>, <&clockgen_c_vcc CLK_S_HDMI_REJECT_PLL>, <&clockgen_b1 CLK_S_PCM_0>;
+ hdmi,hpd-gpio = <&PIO2 5>;
+ };
+
+ sti-hda@fe85a000 {
+ compatible = "st,stih416-hda";
+ reg = <0xfe85a000 0x400>, <0xfe83085c 0x4>;
+ reg-names = "hda-reg", "video-dacs-ctrl";
+ clock-names = "pix", "hddac";
+ clocks = <&clockgen_c_vcc CLK_S_PIX_HD>, <&clockgen_c_vcc CLK_S_HDDAC>;
+ };
+ };
+ };
+ ...
+};
diff --git a/dts/Bindings/hwmon/ibmpowernv.txt b/dts/Bindings/hwmon/ibmpowernv.txt
new file mode 100644
index 0000000000..f93242be60
--- /dev/null
+++ b/dts/Bindings/hwmon/ibmpowernv.txt
@@ -0,0 +1,23 @@
+IBM POWERNV platform sensors
+----------------------------
+
+Required node properties:
+- compatible: must be one of
+ "ibm,opal-sensor-cooling-fan"
+ "ibm,opal-sensor-amb-temp"
+ "ibm,opal-sensor-power-supply"
+ "ibm,opal-sensor-power"
+- sensor-id: an opaque id provided by the firmware to the kernel, identifies a
+ given sensor and its attribute data
+
+Example sensors node:
+
+cooling-fan#8-data {
+ sensor-id = <0x7052107>;
+ compatible = "ibm,opal-sensor-cooling-fan";
+};
+
+amb-temp#1-thrs {
+ sensor-id = <0x5096000>;
+ compatible = "ibm,opal-sensor-amb-temp";
+};
diff --git a/dts/Bindings/hwmon/ntc_thermistor.txt b/dts/Bindings/hwmon/ntc_thermistor.txt
index b117b2e9e1..2391e5c419 100644
--- a/dts/Bindings/hwmon/ntc_thermistor.txt
+++ b/dts/Bindings/hwmon/ntc_thermistor.txt
@@ -3,6 +3,7 @@ NTC Thermistor hwmon sensors
Requires node properties:
- "compatible" value : one of
+ "epcos,b57330v2103"
"murata,ncp15wb473"
"murata,ncp18wb473"
"murata,ncp21wb473"
diff --git a/dts/Bindings/hwmon/pwm-fan.txt b/dts/Bindings/hwmon/pwm-fan.txt
new file mode 100644
index 0000000000..610757ce44
--- /dev/null
+++ b/dts/Bindings/hwmon/pwm-fan.txt
@@ -0,0 +1,12 @@
+Bindings for a fan connected to the PWM lines
+
+Required properties:
+- compatible : "pwm-fan"
+- pwms : the PWM that is used to control the PWM fan
+
+Example:
+ pwm-fan {
+ compatible = "pwm-fan";
+ status = "okay";
+ pwms = <&pwm 0 10000 0>;
+ };
diff --git a/dts/Bindings/i2c/i2c-efm32.txt b/dts/Bindings/i2c/i2c-efm32.txt
index fc15ac5194..50b25c3da1 100644
--- a/dts/Bindings/i2c/i2c-efm32.txt
+++ b/dts/Bindings/i2c/i2c-efm32.txt
@@ -10,7 +10,7 @@ Required properties :
Recommended properties :
- clock-frequency : maximal I2C bus clock frequency in Hz.
- - efm32,location : Decides the location of the USART I/O pins.
+ - energymicro,location : Decides the location of the USART I/O pins.
Allowed range : [0 .. 6]
Example:
@@ -23,7 +23,7 @@ Example:
clocks = <&cmu clk_HFPERCLKI2C0>;
clock-frequency = <100000>;
status = "ok";
- efm32,location = <3>;
+ energymicro,location = <3>;
eeprom@50 {
compatible = "microchip,24c02";
diff --git a/dts/Bindings/i2c/trivial-devices.txt b/dts/Bindings/i2c/trivial-devices.txt
index bef86e57c3..6af570ec53 100644
--- a/dts/Bindings/i2c/trivial-devices.txt
+++ b/dts/Bindings/i2c/trivial-devices.txt
@@ -50,6 +50,7 @@ epson,rx8581 I2C-BUS INTERFACE REAL TIME CLOCK MODULE
fsl,mag3110 MAG3110: Xtrinsic High Accuracy, 3D Magnetometer
fsl,mc13892 MC13892: Power Management Integrated Circuit (PMIC) for i.MX35/51
fsl,mma8450 MMA8450Q: Xtrinsic Low-power, 3-axis Xtrinsic Accelerometer
+fsl,mma8452 MMA8452Q: 3-axis 12-bit / 8-bit Digital Accelerometer
fsl,mpr121 MPR121: Proximity Capacitive Touch Sensor Controller
fsl,sgtl5000 SGTL5000: Ultra Low-Power Audio Codec
gmt,g751 G751: Digital Temperature Sensor and Thermal Watchdog with Two-Wire Interface
@@ -69,6 +70,7 @@ nuvoton,npct501 i2c trusted platform module (TPM)
nxp,pca9556 Octal SMBus and I2C registered interface
nxp,pca9557 8-bit I2C-bus and SMBus I/O port with reset
nxp,pcf8563 Real-time clock/calendar
+nxp,pcf85063 Tiny Real-Time Clock
ovti,ov5642 OV5642: Color CMOS QSXGA (5-megapixel) Image Sensor with OmniBSI and Embedded TrueFocus
pericom,pt7c4338 Real-time Clock Module
plx,pex8648 48-Lane, 12-Port PCI Express Gen 2 (5.0 GT/s) Switch
@@ -83,5 +85,6 @@ stm,m41t80 M41T80 - SERIAL ACCESS RTC WITH ALARMS
taos,tsl2550 Ambient Light Sensor with SMBUS/Two Wire Serial Interface
ti,tsc2003 I2C Touch-Screen Controller
ti,tmp102 Low Power Digital Temperature Sensor with SMBUS/Two Wire Serial Interface
+ti,tmp103 Low Power Digital Temperature Sensor with SMBUS/Two Wire Serial Interface
ti,tmp275 Digital Temperature Sensor
winbond,wpct301 i2c trusted platform module (TPM)
diff --git a/dts/Bindings/iio/adc/max1027-adc.txt b/dts/Bindings/iio/adc/max1027-adc.txt
new file mode 100644
index 0000000000..a8770cc6bc
--- /dev/null
+++ b/dts/Bindings/iio/adc/max1027-adc.txt
@@ -0,0 +1,22 @@
+* Maxim 1027/1029/1031 Analog to Digital Converter (ADC)
+
+Required properties:
+ - compatible: Should be "maxim,max1027" or "maxim,max1029" or "maxim,max1031"
+ - reg: SPI chip select number for the device
+ - interrupt-parent: phandle to the parent interrupt controller
+ see: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
+ - interrupts: IRQ line for the ADC
+ see: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
+
+Recommended properties:
+- spi-max-frequency: Definition as per
+ Documentation/devicetree/bindings/spi/spi-bus.txt
+
+Example:
+adc@0 {
+ compatible = "maxim,max1027";
+ reg = <0>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <15 IRQ_TYPE_EDGE_RISING>;
+ spi-max-frequency = <1000000>;
+};
diff --git a/dts/Bindings/iio/magnetometer/hmc5843.txt b/dts/Bindings/iio/magnetometer/hmc5843.txt
index 90d5f34db0..8e191eef01 100644
--- a/dts/Bindings/iio/magnetometer/hmc5843.txt
+++ b/dts/Bindings/iio/magnetometer/hmc5843.txt
@@ -3,6 +3,10 @@
Required properties:
- compatible : should be "honeywell,hmc5843"
+ Other models which are supported with driver are:
+ "honeywell,hmc5883"
+ "honeywell,hmc5883l"
+ "honeywell,hmc5983"
- reg : the I2C address of the magnetometer - typically 0x1e
Optional properties:
diff --git a/dts/Bindings/iio/st-sensors.txt b/dts/Bindings/iio/st-sensors.txt
new file mode 100644
index 0000000000..a7a0a15913
--- /dev/null
+++ b/dts/Bindings/iio/st-sensors.txt
@@ -0,0 +1,54 @@
+STMicroelectronics MEMS sensors
+
+The STMicroelectronics sensor devices are pretty straight-forward I2C or
+SPI devices, all sharing the same device tree descriptions no matter what
+type of sensor it is.
+
+Required properties:
+- compatible: see the list of valid compatible strings below
+- reg: the I2C or SPI address the device will respond to
+
+Optional properties:
+- vdd-supply: an optional regulator that needs to be on to provide VDD
+ power to the sensor.
+- vddio-supply: an optional regulator that needs to be on to provide the
+ VDD IO power to the sensor.
+- st,drdy-int-pin: the pin on the package that will be used to signal
+ "data ready" (valid values: 1 or 2). This property is not configurable
+ on all sensors.
+
+Sensors may also have applicable pin control settings, those use the
+standard bindings from pinctrl/pinctrl-bindings.txt.
+
+Valid compatible strings:
+
+Accelerometers:
+- st,lsm303dlh-accel
+- st,lsm303dlhc-accel
+- st,lis3dh-accel
+- st,lsm330d-accel
+- st,lsm330dl-accel
+- st,lsm330dlc-accel
+- st,lis331dlh-accel
+- st,lsm303dl-accel
+- st,lsm303dlm-accel
+- st,lsm330-accel
+
+Gyroscopes:
+- st,l3g4200d-gyro
+- st,lsm330d-gyro
+- st,lsm330dl-gyro
+- st,lsm330dlc-gyro
+- st,l3gd20-gyro
+- st,l3g4is-gyro
+- st,lsm330-gyro
+
+Magnetometers:
+- st,lsm303dlhc-magn
+- st,lsm303dlm-magn
+- st,lis3mdl-magn
+
+Pressure sensors:
+- st,lps001wp-press
+- st,lps25h-press
+- st,lps331ap-press
diff --git a/dts/Bindings/input/atmel,maxtouch.txt b/dts/Bindings/input/atmel,maxtouch.txt
new file mode 100644
index 0000000000..baef432e83
--- /dev/null
+++ b/dts/Bindings/input/atmel,maxtouch.txt
@@ -0,0 +1,25 @@
+Atmel maXTouch touchscreen/touchpad
+
+Required properties:
+- compatible:
+ atmel,maxtouch
+
+- reg: The I2C address of the device
+
+- interrupts: The sink for the touchpad's IRQ output
+ See ../interrupt-controller/interrupts.txt
+
+Optional properties for main touchpad device:
+
+- linux,gpio-keymap: An array of up to 4 entries indicating the Linux
+ keycode generated by each GPIO. Linux keycodes are defined in
+ <dt-bindings/input/input.h>.
+
+Example:
+
+ touch@4b {
+ compatible = "atmel,maxtouch";
+ reg = <0x4b>;
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_LEVEL_LOW>;
+ };
diff --git a/dts/Bindings/input/cap1106.txt b/dts/Bindings/input/cap1106.txt
new file mode 100644
index 0000000000..4b463904cb
--- /dev/null
+++ b/dts/Bindings/input/cap1106.txt
@@ -0,0 +1,53 @@
+Device tree bindings for Microchip CAP1106, 6 channel capacitive touch sensor
+
+The node for this driver must be a child of a I2C controller node, as the
+device communication via I2C only.
+
+Required properties:
+
+ compatible: Must be "microchip,cap1106"
+
+ reg: The I2C slave address of the device.
+ Only 0x28 is valid.
+
+ interrupts: Property describing the interrupt line the
+ device's ALERT#/CM_IRQ# pin is connected to.
+ The device only has one interrupt source.
+
+Optional properties:
+
+ autorepeat: Enables the Linux input system's autorepeat
+ feature on the input device.
+
+ microchip,sensor-gain: Defines the gain of the sensor circuitry. This
+ effectively controls the sensitivity, as a
+ smaller delta capacitance is required to
+ generate the same delta count values.
+ Valid values are 1, 2, 4, and 8.
+ By default, a gain of 1 is set.
+
+ linux,keycodes: Specifies an array of numeric keycode values to
+ be used for the channels. If this property is
+ omitted, KEY_A, KEY_B, etc are used as
+ defaults. The array must have exactly six
+ entries.
+
+Example:
+
+i2c_controller {
+ cap1106@28 {
+ compatible = "microchip,cap1106";
+ interrupt-parent = <&gpio1>;
+ interrupts = <0 0>;
+ reg = <0x28>;
+ autorepeat;
+ microchip,sensor-gain = <2>;
+
+ linux,keycodes = <103 /* KEY_UP */
+ 106 /* KEY_RIGHT */
+ 108 /* KEY_DOWN */
+ 105 /* KEY_LEFT */
+ 109 /* KEY_PAGEDOWN */
+ 104>; /* KEY_PAGEUP */
+ };
+}
diff --git a/dts/Bindings/input/touchscreen/pixcir_i2c_ts.txt b/dts/Bindings/input/touchscreen/pixcir_i2c_ts.txt
new file mode 100644
index 0000000000..6e551090f4
--- /dev/null
+++ b/dts/Bindings/input/touchscreen/pixcir_i2c_ts.txt
@@ -0,0 +1,26 @@
+* Pixcir I2C touchscreen controllers
+
+Required properties:
+- compatible: must be "pixcir,pixcir_ts" or "pixcir,pixcir_tangoc"
+- reg: I2C address of the chip
+- interrupts: interrupt to which the chip is connected
+- attb-gpio: GPIO connected to the ATTB line of the chip
+- touchscreen-size-x: horizontal resolution of touchscreen (in pixels)
+- touchscreen-size-y: vertical resolution of touchscreen (in pixels)
+
+Example:
+
+ i2c@00000000 {
+ /* ... */
+
+ pixcir_ts@5c {
+ compatible = "pixcir,pixcir_ts";
+ reg = <0x5c>;
+ interrupts = <2 0>;
+ attb-gpio = <&gpf 2 0 2>;
+ touchscreen-size-x = <800>;
+ touchscreen-size-y = <600>;
+ };
+
+ /* ... */
+ };
diff --git a/dts/Bindings/input/touchscreen/zforce_ts.txt b/dts/Bindings/input/touchscreen/zforce_ts.txt
index 2faf1f1fa3..80c37df940 100644
--- a/dts/Bindings/input/touchscreen/zforce_ts.txt
+++ b/dts/Bindings/input/touchscreen/zforce_ts.txt
@@ -9,6 +9,9 @@ Required properties:
- x-size: horizontal resolution of touchscreen
- y-size: vertical resolution of touchscreen
+Optional properties:
+- vdd-supply: Regulator controlling the controller supply
+
Example:
i2c@00000000 {
@@ -18,6 +21,7 @@ Example:
compatible = "neonode,zforce";
reg = <0x50>;
interrupts = <2 0>;
+ vdd-supply = <&reg_zforce_vdd>;
gpios = <&gpio5 6 0>, /* INT */
<&gpio5 9 0>; /* RST */
diff --git a/dts/Bindings/arm/atmel-aic.txt b/dts/Bindings/interrupt-controller/atmel,aic.txt
index 2742e9cfd6..2742e9cfd6 100644
--- a/dts/Bindings/arm/atmel-aic.txt
+++ b/dts/Bindings/interrupt-controller/atmel,aic.txt
diff --git a/dts/Bindings/interrupt-controller/opencores,or1k-pic.txt b/dts/Bindings/interrupt-controller/opencores,or1k-pic.txt
new file mode 100644
index 0000000000..55c04faa3f
--- /dev/null
+++ b/dts/Bindings/interrupt-controller/opencores,or1k-pic.txt
@@ -0,0 +1,23 @@
+OpenRISC 1000 Programmable Interrupt Controller
+
+Required properties:
+
+- compatible : should be "opencores,or1k-pic-level" for variants with
+ level triggered interrupt lines, "opencores,or1k-pic-edge" for variants with
+ edge triggered interrupt lines or "opencores,or1200-pic" for machines
+ with the non-spec compliant or1200 type implementation.
+
+ "opencores,or1k-pic" is also provided as an alias to "opencores,or1200-pic",
+ but this is only for backwards compatibility.
+
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode an
+ interrupt source. The value shall be 1.
+
+Example:
+
+intc: interrupt-controller {
+ compatible = "opencores,or1k-pic-level";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+};
diff --git a/dts/Bindings/iommu/arm,smmu.txt b/dts/Bindings/iommu/arm,smmu.txt
index f284b99402..2d0f7cd867 100644
--- a/dts/Bindings/iommu/arm,smmu.txt
+++ b/dts/Bindings/iommu/arm,smmu.txt
@@ -42,12 +42,6 @@ conditions.
** System MMU optional properties:
-- smmu-parent : When multiple SMMUs are chained together, this
- property can be used to provide a phandle to the
- parent SMMU (that is the next SMMU on the path going
- from the mmu-masters towards memory) node for this
- SMMU.
-
- calxeda,smmu-secure-config-access : Enable proper handling of buggy
implementations that always use secure access to
SMMU configuration registers. In this case non-secure
diff --git a/dts/Bindings/iommu/iommu.txt b/dts/Bindings/iommu/iommu.txt
new file mode 100644
index 0000000000..5a8b4624de
--- /dev/null
+++ b/dts/Bindings/iommu/iommu.txt
@@ -0,0 +1,182 @@
+This document describes the generic device tree binding for IOMMUs and their
+master(s).
+
+
+IOMMU device node:
+==================
+
+An IOMMU can provide the following services:
+
+* Remap address space to allow devices to access physical memory ranges that
+ they otherwise wouldn't be capable of accessing.
+
+ Example: 32-bit DMA to 64-bit physical addresses
+
+* Implement scatter-gather at page level granularity so that the device does
+ not have to.
+
+* Provide system protection against "rogue" DMA by forcing all accesses to go
+ through the IOMMU and faulting when encountering accesses to unmapped
+ address regions.
+
+* Provide address space isolation between multiple contexts.
+
+ Example: Virtualization
+
+Device nodes compatible with this binding represent hardware with some of the
+above capabilities.
+
+IOMMUs can be single-master or multiple-master. Single-master IOMMU devices
+typically have a fixed association to the master device, whereas multiple-
+master IOMMU devices can translate accesses from more than one master.
+
+The device tree node of the IOMMU device's parent bus must contain a valid
+"dma-ranges" property that describes how the physical address space of the
+IOMMU maps to memory. An empty "dma-ranges" property means that there is a
+1:1 mapping from IOMMU to memory.
+
+Required properties:
+--------------------
+- #iommu-cells: The number of cells in an IOMMU specifier needed to encode an
+ address.
+
+The meaning of the IOMMU specifier is defined by the device tree binding of
+the specific IOMMU. Below are a few examples of typical use-cases:
+
+- #iommu-cells = <0>: Single master IOMMU devices are not configurable and
+ therefore no additional information needs to be encoded in the specifier.
+ This may also apply to multiple master IOMMU devices that do not allow the
+ association of masters to be configured. Note that an IOMMU can by design
+ be multi-master yet only expose a single master in a given configuration.
+ In such cases the number of cells will usually be 1 as in the next case.
+- #iommu-cells = <1>: Multiple master IOMMU devices may need to be configured
+ in order to enable translation for a given master. In such cases the single
+ address cell corresponds to the master device's ID. In some cases more than
+ one cell can be required to represent a single master ID.
+- #iommu-cells = <4>: Some IOMMU devices allow the DMA window for masters to
+ be configured. The first cell of the address in this may contain the master
+ device's ID for example, while the second cell could contain the start of
+ the DMA window for the given device. The length of the DMA window is given
+ by the third and fourth cells.
+
+Note that these are merely examples and real-world use-cases may use different
+definitions to represent their individual needs. Always refer to the specific
+IOMMU binding for the exact meaning of the cells that make up the specifier.
+
+
+IOMMU master node:
+==================
+
+Devices that access memory through an IOMMU are called masters. A device can
+have multiple master interfaces (to one or more IOMMU devices).
+
+Required properties:
+--------------------
+- iommus: A list of phandle and IOMMU specifier pairs that describe the IOMMU
+ master interfaces of the device. One entry in the list describes one master
+ interface of the device.
+
+When an "iommus" property is specified in a device tree node, the IOMMU will
+be used for address translation. If a "dma-ranges" property exists in the
+device's parent node it will be ignored. An exception to this rule is if the
+referenced IOMMU is disabled, in which case the "dma-ranges" property of the
+parent shall take effect. Note that merely disabling a device tree node does
+not guarantee that the IOMMU is really disabled since the hardware may not
+have a means to turn off translation. But it is invalid in such cases to
+disable the IOMMU's device tree node in the first place because it would
+prevent any driver from properly setting up the translations.
+
+
+Notes:
+======
+
+One possible extension to the above is to use an "iommus" property along with
+a "dma-ranges" property in a bus device node (such as PCI host bridges). This
+can be useful to describe how children on the bus relate to the IOMMU if they
+are not explicitly listed in the device tree (e.g. PCI devices). However, the
+requirements of that use-case haven't been fully determined yet. Implementing
+this is therefore not recommended without further discussion and extension of
+this binding.
+
+
+Examples:
+=========
+
+Single-master IOMMU:
+--------------------
+
+ iommu {
+ #iommu-cells = <0>;
+ };
+
+ master {
+ iommus = <&{/iommu}>;
+ };
+
+Multiple-master IOMMU with fixed associations:
+----------------------------------------------
+
+ /* multiple-master IOMMU */
+ iommu {
+ /*
+ * Masters are statically associated with this IOMMU and share
+ * the same address translations because the IOMMU does not
+ * have sufficient information to distinguish between masters.
+ *
+ * Consequently address translation is always on or off for
+ * all masters at any given point in time.
+ */
+ #iommu-cells = <0>;
+ };
+
+ /* static association with IOMMU */
+ master@1 {
+ reg = <1>;
+ iommus = <&{/iommu}>;
+ };
+
+ /* static association with IOMMU */
+ master@2 {
+ reg = <2>;
+ iommus = <&{/iommu}>;
+ };
+
+Multiple-master IOMMU:
+----------------------
+
+ iommu {
+ /* the specifier represents the ID of the master */
+ #iommu-cells = <1>;
+ };
+
+ master@1 {
+ /* device has master ID 42 in the IOMMU */
+ iommus = <&{/iommu} 42>;
+ };
+
+ master@2 {
+ /* device has master IDs 23 and 24 in the IOMMU */
+ iommus = <&{/iommu} 23>, <&{/iommu} 24>;
+ };
+
+Multiple-master IOMMU with configurable DMA window:
+---------------------------------------------------
+
+ / {
+ iommu {
+ /*
+ * One cell for the master ID and one cell for the
+ * address of the DMA window. The length of the DMA
+ * window is encoded in two cells.
+ *
+ * The DMA window is the range addressable by the
+ * master (i.e. the I/O virtual address space).
+ */
+ #iommu-cells = <4>;
+ };
+
+ master {
+ /* master ID 42, 4 GiB DMA window starting at 0 */
+ iommus = <&{/iommu} 42 0 0x1 0x0>;
+ };
+ };
diff --git a/dts/Bindings/leds/pca963x.txt b/dts/Bindings/leds/pca963x.txt
index aece3eac1b..dafbe9931c 100644
--- a/dts/Bindings/leds/pca963x.txt
+++ b/dts/Bindings/leds/pca963x.txt
@@ -1,18 +1,19 @@
LEDs connected to pca9632, pca9633 or pca9634
Required properties:
-- compatible : should be : "nxp,pca9632", "nxp,pca9633" or "nxp,pca9634"
+- compatible : should be : "nxp,pca9632", "nxp,pca9633", "nxp,pca9634" or "nxp,pca9635"
Optional properties:
-- nxp,totem-pole : use totem pole (push-pull) instead of default open-drain
+- nxp,totem-pole : use totem pole (push-pull) instead of open-drain (pca9632 defaults
+ to open-drain, newer chips to totem pole)
- nxp,hw-blink : use hardware blinking instead of software blinking
Each led is represented as a sub-node of the nxp,pca963x device.
LED sub-node properties:
- label : (optional) see Documentation/devicetree/bindings/leds/common.txt
-- reg : number of LED line (could be from 0 to 3 in pca9632 or pca9633
- or 0 to 7 in pca9634)
+- reg : number of LED line (could be from 0 to 3 in pca9632 or pca9633,
+ 0 to 7 in pca9634, or 0 to 15 in pca9635)
- linux,default-trigger : (optional)
see Documentation/devicetree/bindings/leds/common.txt
diff --git a/dts/Bindings/leds/tca6507.txt b/dts/Bindings/leds/tca6507.txt
index d7221b8498..bad9102796 100644
--- a/dts/Bindings/leds/tca6507.txt
+++ b/dts/Bindings/leds/tca6507.txt
@@ -8,7 +8,7 @@ Required properties:
Optional properties:
- gpio-controller: allows lines to be used as output-only GPIOs.
-- #gpio-cells: if present, must be 0.
+- #gpio-cells: if present, must not be 0.
Each led is represented as a sub-node of the ti,tca6507 device.
diff --git a/dts/Bindings/media/atmel-isi.txt b/dts/Bindings/media/atmel-isi.txt
new file mode 100644
index 0000000000..17e71b7b44
--- /dev/null
+++ b/dts/Bindings/media/atmel-isi.txt
@@ -0,0 +1,51 @@
+Atmel Image Sensor Interface (ISI) SoC Camera Subsystem
+----------------------------------------------
+
+Required properties:
+- compatible: must be "atmel,at91sam9g45-isi"
+- reg: physical base address and length of the registers set for the device;
+- interrupts: should contain IRQ line for the ISI;
+- clocks: list of clock specifiers, corresponding to entries in
+ the clock-names property;
+- clock-names: must contain "isi_clk", which is the isi peripherial clock.
+
+ISI supports a single port node with parallel bus. It should contain one
+'port' child node with child 'endpoint' node. Please refer to the bindings
+defined in Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+Example:
+ isi: isi@f0034000 {
+ compatible = "atmel,at91sam9g45-isi";
+ reg = <0xf0034000 0x4000>;
+ interrupts = <37 IRQ_TYPE_LEVEL_HIGH 5>;
+
+ clocks = <&isi_clk>;
+ clock-names = "isi_clk";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_isi>;
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ isi_0: endpoint {
+ remote-endpoint = <&ov2640_0>;
+ bus-width = <8>;
+ };
+ };
+ };
+
+ i2c1: i2c@f0018000 {
+ ov2640: camera@0x30 {
+ compatible = "omnivision,ov2640";
+ reg = <0x30>;
+
+ port {
+ ov2640_0: endpoint {
+ remote-endpoint = <&isi_0>;
+ bus-width = <8>;
+ };
+ };
+ };
+ };
diff --git a/dts/Bindings/media/exynos-jpeg-codec.txt b/dts/Bindings/media/exynos-jpeg-codec.txt
index 937b755baf..bf52ed4a50 100644
--- a/dts/Bindings/media/exynos-jpeg-codec.txt
+++ b/dts/Bindings/media/exynos-jpeg-codec.txt
@@ -3,9 +3,13 @@ Samsung S5P/EXYNOS SoC series JPEG codec
Required properties:
- compatible : should be one of:
- "samsung,s5pv210-jpeg", "samsung,exynos4210-jpeg";
+ "samsung,s5pv210-jpeg", "samsung,exynos4210-jpeg",
+ "samsung,exynos3250-jpeg";
- reg : address and length of the JPEG codec IP register set;
- interrupts : specifies the JPEG codec IP interrupt;
-- clocks : should contain the JPEG codec IP gate clock specifier, from the
- common clock bindings;
-- clock-names : should contain "jpeg" entry.
+- clock-names : should contain:
+ - "jpeg" for the core gate clock,
+ - "sclk" for the special clock (optional).
+- clocks : should contain the clock specifier and clock ID list
+ matching entries in the clock-names property; from
+ the common clock bindings.
diff --git a/dts/Bindings/media/i2c/mt9m111.txt b/dts/Bindings/media/i2c/mt9m111.txt
new file mode 100644
index 0000000000..ed5a334b1e
--- /dev/null
+++ b/dts/Bindings/media/i2c/mt9m111.txt
@@ -0,0 +1,28 @@
+Micron 1.3Mp CMOS Digital Image Sensor
+
+The Micron MT9M111 is a CMOS active pixel digital image sensor with an active
+array size of 1280H x 1024V. It is programmable through a simple two-wire serial
+interface.
+
+Required Properties:
+- compatible: value should be "micron,mt9m111"
+
+For further reading on port node refer to
+Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+Example:
+
+ i2c_master {
+ mt9m111@5d {
+ compatible = "micron,mt9m111";
+ reg = <0x5d>;
+
+ remote = <&pxa_camera>;
+ port {
+ mt9m111_1: endpoint {
+ bus-width = <8>;
+ remote-endpoint = <&pxa_camera>;
+ };
+ };
+ };
+ };
diff --git a/dts/Bindings/media/pxa-camera.txt b/dts/Bindings/media/pxa-camera.txt
new file mode 100644
index 0000000000..11f5b5d51a
--- /dev/null
+++ b/dts/Bindings/media/pxa-camera.txt
@@ -0,0 +1,43 @@
+Marvell PXA camera host interface
+
+Required properties:
+ - compatible: Should be "marvell,pxa270-qci"
+ - reg: register base and size
+ - interrupts: the interrupt number
+ - any required generic properties defined in video-interfaces.txt
+
+Optional properties:
+ - clocks: input clock (see clock-bindings.txt)
+ - clock-output-names: should contain the name of the clock driving the
+ sensor master clock MCLK
+ - clock-frequency: host interface is driving MCLK, and MCLK rate is this rate
+
+Example:
+
+ pxa_camera: pxa_camera@50000000 {
+ compatible = "marvell,pxa270-qci";
+ reg = <0x50000000 0x1000>;
+ interrupts = <33>;
+
+ clocks = <&pxa2xx_clks 24>;
+ clock-names = "ciclk";
+ clock-frequency = <50000000>;
+ clock-output-names = "qci_mclk";
+
+ status = "okay";
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* Parallel bus endpoint */
+ qci: endpoint@0 {
+ reg = <0>; /* Local endpoint # */
+ remote-endpoint = <&mt9m111_1>;
+ bus-width = <8>; /* Used data lines */
+ hsync-active = <0>; /* Active low */
+ vsync-active = <0>; /* Active low */
+ pclk-sample = <1>; /* Rising */
+ };
+ };
+ };
diff --git a/dts/Bindings/media/rcar_vin.txt b/dts/Bindings/media/rcar_vin.txt
new file mode 100644
index 0000000000..ba61782c2a
--- /dev/null
+++ b/dts/Bindings/media/rcar_vin.txt
@@ -0,0 +1,86 @@
+Renesas RCar Video Input driver (rcar_vin)
+------------------------------------------
+
+The rcar_vin device provides video input capabilities for the Renesas R-Car
+family of devices. The current blocks are always slaves and suppot one input
+channel which can be either RGB, YUYV or BT656.
+
+ - compatible: Must be one of the following
+ - "renesas,vin-r8a7791" for the R8A7791 device
+ - "renesas,vin-r8a7790" for the R8A7790 device
+ - "renesas,vin-r8a7779" for the R8A7779 device
+ - "renesas,vin-r8a7778" for the R8A7778 device
+ - reg: the register base and size for the device registers
+ - interrupts: the interrupt for the device
+ - clocks: Reference to the parent clock
+
+Additionally, an alias named vinX will need to be created to specify
+which video input device this is.
+
+The per-board settings:
+ - port sub-node describing a single endpoint connected to the vin
+ as described in video-interfaces.txt[1]. Only the first one will
+ be considered as each vin interface has one input port.
+
+ These settings are used to work out video input format and widths
+ into the system.
+
+
+Device node example
+-------------------
+
+ aliases {
+ vin0 = &vin0;
+ };
+
+ vin0: vin@0xe6ef0000 {
+ compatible = "renesas,vin-r8a7790";
+ clocks = <&mstp8_clks R8A7790_CLK_VIN0>;
+ reg = <0 0xe6ef0000 0 0x1000>;
+ interrupts = <0 188 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+Board setup example (vin1 composite video input)
+------------------------------------------------
+
+&i2c2 {
+ status = "ok";
+ pinctrl-0 = <&i2c2_pins>;
+ pinctrl-names = "default";
+
+ adv7180@20 {
+ compatible = "adi,adv7180";
+ reg = <0x20>;
+ remote = <&vin1>;
+
+ port {
+ adv7180: endpoint {
+ bus-width = <8>;
+ remote-endpoint = <&vin1ep0>;
+ };
+ };
+ };
+};
+
+/* composite video input */
+&vin1 {
+ pinctrl-0 = <&vin1_pins>;
+ pinctrl-names = "default";
+
+ status = "ok";
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vin1ep0: endpoint {
+ remote-endpoint = <&adv7180>;
+ bus-width = <8>;
+ };
+ };
+};
+
+
+
+[1] video-interfaces.txt common video media interface
diff --git a/dts/Bindings/media/sunxi-ir.txt b/dts/Bindings/media/sunxi-ir.txt
new file mode 100644
index 0000000000..23dd5ad07b
--- /dev/null
+++ b/dts/Bindings/media/sunxi-ir.txt
@@ -0,0 +1,23 @@
+Device-Tree bindings for SUNXI IR controller found in sunXi SoC family
+
+Required properties:
+- compatible : should be "allwinner,sun4i-a10-ir";
+- clocks : list of clock specifiers, corresponding to
+ entries in clock-names property;
+- clock-names : should contain "apb" and "ir" entries;
+- interrupts : should contain IR IRQ number;
+- reg : should contain IO map address for IR.
+
+Optional properties:
+- linux,rc-map-name : Remote control map name.
+
+Example:
+
+ir0: ir@01c21800 {
+ compatible = "allwinner,sun4i-a10-ir";
+ clocks = <&apb0_gates 6>, <&ir0_clk>;
+ clock-names = "apb", "ir";
+ interrupts = <0 5 1>;
+ reg = <0x01C21800 0x40>;
+ linux,rc-map-name = "rc-rc6-mce";
+};
diff --git a/dts/Bindings/mfd/arizona.txt b/dts/Bindings/mfd/arizona.txt
index 36a0c3d8c7..5c7e723098 100644
--- a/dts/Bindings/mfd/arizona.txt
+++ b/dts/Bindings/mfd/arizona.txt
@@ -42,6 +42,16 @@ Optional properties:
the chip default will be used. If present exactly five values must
be specified.
+ - DCVDD-supply, MICVDD-supply : Power supplies, only need to be specified if
+ they are being externally supplied. As covered in
+ Documentation/devicetree/bindings/regulator/regulator.txt
+
+Optional subnodes:
+ - ldo1 : Initial data for the LDO1 regulator, as covered in
+ Documentation/devicetree/bindings/regulator/regulator.txt
+ - micvdd : Initial data for the MICVDD regulator, as covered in
+ Documentation/devicetree/bindings/regulator/regulator.txt
+
Example:
codec: wm5102@1a {
diff --git a/dts/Bindings/mfd/as3722.txt b/dts/Bindings/mfd/as3722.txt
index 8edcb9bd87..4f64b2a731 100644
--- a/dts/Bindings/mfd/as3722.txt
+++ b/dts/Bindings/mfd/as3722.txt
@@ -13,6 +13,14 @@ Required properties:
The second cell is the flags, encoded as the trigger masks from binding document
interrupts.txt, using dt-bindings/irq.
+Optional properties:
+--------------------
+- ams,enable-internal-int-pullup: Boolean property, to enable internal pullup on
+ interrupt pin. Missing this will disable internal pullup on INT pin.
+- ams,enable-internal-i2c-pullup: Boolean property, to enable internal pullup on
+ i2c scl/sda pins. Missing this will disable internal pullup on i2c
+ scl/sda lines.
+
Optional submodule and their properties:
=======================================
diff --git a/dts/Bindings/mfd/palmas.txt b/dts/Bindings/mfd/palmas.txt
index e5f0f83034..eda898978d 100644
--- a/dts/Bindings/mfd/palmas.txt
+++ b/dts/Bindings/mfd/palmas.txt
@@ -6,6 +6,7 @@ twl6037 (palmas)
tps65913 (palmas)
tps65914 (palmas)
tps659038
+tps65917
Required properties:
- compatible : Should be from the list
@@ -16,6 +17,7 @@ Required properties:
ti,tps65914
ti,tps80036
ti,tps659038
+ ti,tps65917
and also the generic series names
ti,palmas
- interrupt-controller : palmas has its own internal IRQs
diff --git a/dts/Bindings/mfd/s2mps11.txt b/dts/Bindings/mfd/s2mps11.txt
index d81ba30c0d..ba2d7f0f9c 100644
--- a/dts/Bindings/mfd/s2mps11.txt
+++ b/dts/Bindings/mfd/s2mps11.txt
@@ -1,5 +1,5 @@
-* Samsung S2MPS11 and S2MPS14 Voltage and Current Regulator
+* Samsung S2MPS11, S2MPS14 and S2MPU02 Voltage and Current Regulator
The Samsung S2MPS11 is a multi-function device which includes voltage and
current regulators, RTC, charger controller and other sub-blocks. It is
@@ -7,7 +7,8 @@ interfaced to the host controller using an I2C interface. Each sub-block is
addressed by the host system using different I2C slave addresses.
Required properties:
-- compatible: Should be "samsung,s2mps11-pmic" or "samsung,s2mps14-pmic".
+- compatible: Should be "samsung,s2mps11-pmic" or "samsung,s2mps14-pmic"
+ or "samsung,s2mpu02-pmic".
- reg: Specifies the I2C slave address of the pmic block. It should be 0x66.
Optional properties:
@@ -81,11 +82,13 @@ as per the datasheet of s2mps11.
- valid values for n are:
- S2MPS11: 1 to 38
- S2MPS14: 1 to 25
- - Example: LDO1, LD02, LDO28
+ - S2MPU02: 1 to 28
+ - Example: LDO1, LDO2, LDO28
- BUCKn
- valid values for n are:
- S2MPS11: 1 to 10
- S2MPS14: 1 to 5
+ - S2MPU02: 1 to 7
- Example: BUCK1, BUCK2, BUCK9
Example:
@@ -96,7 +99,7 @@ Example:
s2m_osc: clocks {
compatible = "samsung,s2mps11-clk";
- #clock-cells = 1;
+ #clock-cells = <1>;
clock-output-names = "xx", "yy", "zz";
};
diff --git a/dts/Bindings/mfd/sun6i-prcm.txt b/dts/Bindings/mfd/sun6i-prcm.txt
index 1f5a31fef9..03c5a551da 100644
--- a/dts/Bindings/mfd/sun6i-prcm.txt
+++ b/dts/Bindings/mfd/sun6i-prcm.txt
@@ -4,7 +4,7 @@ PRCM is an MFD device exposing several Power Management related devices
(like clks and reset controllers).
Required properties:
- - compatible: "allwinner,sun6i-a31-prcm"
+ - compatible: "allwinner,sun6i-a31-prcm" or "allwinner,sun8i-a23-prcm"
- reg: The PRCM registers range
The prcm node may contain several subdevices definitions:
diff --git a/dts/Bindings/misc/nvidia,tegra20-apbmisc.txt b/dts/Bindings/misc/nvidia,tegra20-apbmisc.txt
new file mode 100644
index 0000000000..b97b8bef1f
--- /dev/null
+++ b/dts/Bindings/misc/nvidia,tegra20-apbmisc.txt
@@ -0,0 +1,13 @@
+NVIDIA Tegra20/Tegra30/Tegr114/Tegra124 apbmisc block
+
+Required properties:
+- compatible : should be:
+ "nvidia,tegra20-apbmisc"
+ "nvidia,tegra30-apbmisc"
+ "nvidia,tegra114-apbmisc"
+ "nvidia,tegra124-apbmisc"
+- reg: Should contain 2 entries: the first entry gives the physical address
+ and length of the registers which contain revision and debug features.
+ The second entry gives the physical address and length of the
+ registers indicating the strapping options.
+
diff --git a/dts/Bindings/mmc/exynos-dw-mshc.txt b/dts/Bindings/mmc/exynos-dw-mshc.txt
index 532b1d440a..6cd3525d0e 100644
--- a/dts/Bindings/mmc/exynos-dw-mshc.txt
+++ b/dts/Bindings/mmc/exynos-dw-mshc.txt
@@ -46,13 +46,14 @@ Required Properties:
- if CIU clock divider value is 0 (that is divide by 1), both tx and rx
phase shift clocks should be 0.
-Required properties for a slot:
+Required properties for a slot (Deprecated - Recommend to use one slot per host):
* gpios: specifies a list of gpios used for command, clock and data bus. The
first gpio is the command line and the second gpio is the clock line. The
rest of the gpios (depending on the bus-width property) are the data lines in
no particular order. The format of the gpio specifier depends on the gpio
controller.
+(Deprecated - Refer to Documentation/devicetree/binding/pinctrl/samsung-pinctrl.txt)
Example:
@@ -69,21 +70,13 @@ Example:
dwmmc0@12200000 {
num-slots = <1>;
- supports-highspeed;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
broken-cd;
fifo-depth = <0x80>;
card-detect-delay = <200>;
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <2 3>;
samsung,dw-mshc-ddr-timing = <1 2>;
-
- slot@0 {
- reg = <0>;
- bus-width = <8>;
- gpios = <&gpc0 0 2 0 3>, <&gpc0 1 2 0 3>,
- <&gpc1 0 2 3 3>, <&gpc1 1 2 3 3>,
- <&gpc1 2 2 3 3>, <&gpc1 3 2 3 3>,
- <&gpc0 3 2 3 3>, <&gpc0 4 2 3 3>,
- <&gpc0 5 2 3 3>, <&gpc0 6 2 3 3>;
- };
+ bus-width = <8>;
};
diff --git a/dts/Bindings/mmc/k3-dw-mshc.txt b/dts/Bindings/mmc/k3-dw-mshc.txt
index e5bc49f764..3b35449314 100644
--- a/dts/Bindings/mmc/k3-dw-mshc.txt
+++ b/dts/Bindings/mmc/k3-dw-mshc.txt
@@ -34,13 +34,11 @@ Example:
num-slots = <1>;
vmmc-supply = <&ldo12>;
fifo-depth = <0x100>;
- supports-highspeed;
pinctrl-names = "default";
pinctrl-0 = <&sd_pmx_pins &sd_cfg_func1 &sd_cfg_func2>;
- slot@0 {
- reg = <0>;
- bus-width = <4>;
- disable-wp;
- cd-gpios = <&gpio10 3 0>;
- };
+ bus-width = <4>;
+ disable-wp;
+ cd-gpios = <&gpio10 3 0>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
};
diff --git a/dts/Bindings/mmc/mmc.txt b/dts/Bindings/mmc/mmc.txt
index 3c18001dfd..431716e37a 100644
--- a/dts/Bindings/mmc/mmc.txt
+++ b/dts/Bindings/mmc/mmc.txt
@@ -34,8 +34,8 @@ Optional properties:
- cap-power-off-card: powering off the card is safe
- cap-sdio-irq: enable SDIO IRQ signalling on this interface
- full-pwr-cycle: full power cycle of the card is supported
-- mmc-highspeed-ddr-1_8v: eMMC high-speed DDR mode(1.8V I/O) is supported
-- mmc-highspeed-ddr-1_2v: eMMC high-speed DDR mode(1.2V I/O) is supported
+- mmc-ddr-1_8v: eMMC high-speed DDR mode(1.8V I/O) is supported
+- mmc-ddr-1_2v: eMMC high-speed DDR mode(1.2V I/O) is supported
- mmc-hs200-1_8v: eMMC HS200 mode(1.8V I/O) is supported
- mmc-hs200-1_2v: eMMC HS200 mode(1.2V I/O) is supported
- mmc-hs400-1_8v: eMMC HS400 mode(1.8V I/O) is supported
diff --git a/dts/Bindings/mmc/renesas,mmcif.txt b/dts/Bindings/mmc/renesas,mmcif.txt
new file mode 100644
index 0000000000..299081f94a
--- /dev/null
+++ b/dts/Bindings/mmc/renesas,mmcif.txt
@@ -0,0 +1,32 @@
+* Renesas Multi Media Card Interface (MMCIF) Controller
+
+This file documents differences between the core properties in mmc.txt
+and the properties used by the MMCIF device.
+
+
+Required properties:
+
+- compatible: must contain one of the following
+ - "renesas,mmcif-r8a7740" for the MMCIF found in r8a7740 SoCs
+ - "renesas,mmcif-r8a7790" for the MMCIF found in r8a7790 SoCs
+ - "renesas,mmcif-r8a7791" for the MMCIF found in r8a7791 SoCs
+ - "renesas,sh-mmcif" for the generic MMCIF
+
+- clocks: reference to the functional clock
+
+- dmas: reference to the DMA channels, one per channel name listed in the
+ dma-names property.
+- dma-names: must contain "tx" for the transmit DMA channel and "rx" for the
+ receive DMA channel.
+
+
+Example: R8A7790 (R-Car H2) MMCIF0
+
+ mmcif0: mmc@ee200000 {
+ compatible = "renesas,mmcif-r8a7790", "renesas,sh-mmcif";
+ reg = <0 0xee200000 0 0x80>;
+ interrupts = <0 169 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A7790_CLK_MMCIF0>;
+ dmas = <&dmac0 0xd1>, <&dmac0 0xd2>;
+ dma-names = "tx", "rx";
+ };
diff --git a/dts/Bindings/mmc/sdhci-msm.txt b/dts/Bindings/mmc/sdhci-msm.txt
index 81b33b5b20..485483a63d 100644
--- a/dts/Bindings/mmc/sdhci-msm.txt
+++ b/dts/Bindings/mmc/sdhci-msm.txt
@@ -27,8 +27,8 @@ Example:
bus-width = <8>;
non-removable;
- vmmc = <&pm8941_l20>;
- vqmmc = <&pm8941_s3>;
+ vmmc-supply = <&pm8941_l20>;
+ vqmmc-supply = <&pm8941_s3>;
pinctrl-names = "default";
pinctrl-0 = <&sdc1_clk &sdc1_cmd &sdc1_data>;
@@ -44,8 +44,8 @@ Example:
bus-width = <4>;
cd-gpios = <&msmgpio 62 0x1>;
- vmmc = <&pm8941_l21>;
- vqmmc = <&pm8941_l13>;
+ vmmc-supply = <&pm8941_l21>;
+ vqmmc-supply = <&pm8941_l13>;
pinctrl-names = "default";
pinctrl-0 = <&sdc2_clk &sdc2_cmd &sdc2_data>;
diff --git a/dts/Bindings/mmc/sdhci-st.txt b/dts/Bindings/mmc/sdhci-st.txt
new file mode 100644
index 0000000000..7527db447a
--- /dev/null
+++ b/dts/Bindings/mmc/sdhci-st.txt
@@ -0,0 +1,33 @@
+* STMicroelectronics sdhci-st MMC/SD controller
+
+This file documents the differences between the core properties in
+Documentation/devicetree/bindings/mmc/mmc.txt and the properties
+used by the sdhci-st driver.
+
+Required properties:
+- compatible : Must be "st,sdhci"
+- clock-names : Should be "mmc"
+ See: Documentation/devicetree/bindings/resource-names.txt
+- clocks : Phandle of the clock used by the sdhci controler
+ See: Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Optional properties:
+- non-removable: non-removable slot
+ See: Documentation/devicetree/bindings/mmc/mmc.txt
+- bus-width: Number of data lines
+ See: Documentation/devicetree/bindings/mmc/mmc.txt
+
+Example:
+
+mmc0: sdhci@fe81e000 {
+ compatible = "st,sdhci";
+ status = "disabled";
+ reg = <0xfe81e000 0x1000>;
+ interrupts = <GIC_SPI 127 IRQ_TYPE_NONE>;
+ interrupt-names = "mmcirq";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mmc0>;
+ clock-names = "mmc";
+ clocks = <&clk_s_a1_ls 1>;
+ bus-width = <8>
+};
diff --git a/dts/Bindings/mmc/synopsys-dw-mshc.txt b/dts/Bindings/mmc/synopsys-dw-mshc.txt
index 2d4a7258a1..346c6095a6 100644
--- a/dts/Bindings/mmc/synopsys-dw-mshc.txt
+++ b/dts/Bindings/mmc/synopsys-dw-mshc.txt
@@ -67,7 +67,8 @@ Optional properties:
* card-detect-delay: Delay in milli-seconds before detecting card after card
insert event. The default value is 0.
-* supports-highspeed: Enables support for high speed cards (up to 50MHz)
+* supports-highspeed (DEPRECATED): Enables support for high speed cards (up to 50MHz)
+ (use "cap-mmc-highspeed" or "cap-sd-highspeed" instead)
* broken-cd: as documented in mmc core bindings.
@@ -98,14 +99,11 @@ board specific portions as listed below.
clock-frequency = <400000000>;
clock-freq-min-max = <400000 200000000>;
num-slots = <1>;
- supports-highspeed;
broken-cd;
fifo-depth = <0x80>;
card-detect-delay = <200>;
vmmc-supply = <&buck8>;
-
- slot@0 {
- reg = <0>;
- bus-width = <8>;
- };
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
};
diff --git a/dts/Bindings/mmc/ti-omap-hsmmc.txt b/dts/Bindings/mmc/ti-omap-hsmmc.txt
index ce8056116f..76bf087bc8 100644
--- a/dts/Bindings/mmc/ti-omap-hsmmc.txt
+++ b/dts/Bindings/mmc/ti-omap-hsmmc.txt
@@ -12,6 +12,7 @@ Required properties:
Should be "ti,omap3-hsmmc", for OMAP3 controllers
Should be "ti,omap3-pre-es3-hsmmc" for OMAP3 controllers pre ES3.0
Should be "ti,omap4-hsmmc", for OMAP4 controllers
+ Should be "ti,am33xx-hsmmc", for AM335x controllers
- ti,hwmods: Must be "mmc<n>", n is controller instance starting 1
Optional properties:
@@ -56,3 +57,56 @@ Examples:
&edma 25>;
dma-names = "tx", "rx";
};
+
+[workaround for missing swakeup on am33xx]
+
+This SOC is missing the swakeup line, it will not detect SDIO irq
+while in suspend.
+
+ ------
+ | PRCM |
+ ------
+ ^ |
+ swakeup | | fclk
+ | v
+ ------ ------- -----
+ | card | -- CIRQ --> | hsmmc | -- IRQ --> | CPU |
+ ------ ------- -----
+
+In suspend the fclk is off and the module is disfunctional. Even register reads
+will fail. A small logic in the host will request fclk restore, when an
+external event is detected. Once the clock is restored, the host detects the
+event normally. Since am33xx doesn't have this line it never wakes from
+suspend.
+
+The workaround is to reconfigure the dat1 line as a GPIO upon suspend. To make
+this work, we need to set the named pinctrl states "default" and "idle".
+Prepare idle to remux dat1 as a gpio, and default to remux it back as sdio
+dat1. The MMC driver will then toggle between idle and default state during
+runtime.
+
+In summary:
+1. select matching 'compatible' section, see example below.
+2. specify pinctrl states "default" and "idle", "sleep" is optional.
+3. specify the gpio irq used for detecting sdio irq in suspend
+
+If configuration is incomplete, a warning message is emitted "falling back to
+polling". Also check the "sdio irq mode" in /sys/kernel/debug/mmc0/regs. Mind
+not every application needs SDIO irq, e.g. MMC cards.
+
+ mmc1: mmc@48060100 {
+ compatible = "ti,am33xx-hsmmc";
+ ...
+ pinctrl-names = "default", "idle", "sleep"
+ pinctrl-0 = <&mmc1_pins>;
+ pinctrl-1 = <&mmc1_idle>;
+ pinctrl-2 = <&mmc1_sleep>;
+ ...
+ interrupts-extended = <&intc 64 &gpio2 28 0>;
+ };
+
+ mmc1_idle : pinmux_cirq_pin {
+ pinctrl-single,pins = <
+ 0x0f8 0x3f /* GPIO2_28 */
+ >;
+ };
diff --git a/dts/Bindings/mmc/tmio_mmc.txt b/dts/Bindings/mmc/tmio_mmc.txt
index 6a2a1160a7..fa0f327cde 100644
--- a/dts/Bindings/mmc/tmio_mmc.txt
+++ b/dts/Bindings/mmc/tmio_mmc.txt
@@ -18,6 +18,7 @@ Required properties:
"renesas,sdhi-r8a7778" - SDHI IP on R8A7778 SoC
"renesas,sdhi-r8a7779" - SDHI IP on R8A7779 SoC
"renesas,sdhi-r8a7790" - SDHI IP on R8A7790 SoC
+ "renesas,sdhi-r8a7791" - SDHI IP on R8A7791 SoC
Optional properties:
- toshiba,mmc-wrprotect-disable: write-protect detection is unavailable
diff --git a/dts/Bindings/mtd/gpmi-nand.txt b/dts/Bindings/mtd/gpmi-nand.txt
index 458d596346..a011fdf61d 100644
--- a/dts/Bindings/mtd/gpmi-nand.txt
+++ b/dts/Bindings/mtd/gpmi-nand.txt
@@ -25,6 +25,16 @@ Optional properties:
discoverable or this property is not enabled,
the software may chooses an implementation-defined
ECC scheme.
+ - fsl,no-blockmark-swap: Don't swap the bad block marker from the OOB
+ area with the byte in the data area but rely on the
+ flash based BBT for identifying bad blocks.
+ NOTE: this is only valid in conjunction with
+ 'nand-on-flash-bbt'.
+ WARNING: on i.MX28 blockmark swapping cannot be
+ disabled for the BootROM in the FCB. Thus,
+ partitions written from Linux with this feature
+ turned on may not be accessible by the BootROM
+ code.
The device tree may optionally contain sub-nodes describing partitions of the
address space. See partition.txt for more detail.
diff --git a/dts/Bindings/net/amd-xgbe-phy.txt b/dts/Bindings/net/amd-xgbe-phy.txt
index d01ed63d3e..42409bfe04 100644
--- a/dts/Bindings/net/amd-xgbe-phy.txt
+++ b/dts/Bindings/net/amd-xgbe-phy.txt
@@ -8,10 +8,16 @@ Required properties:
- SerDes integration registers (1/2)
- SerDes integration registers (2/2)
+Optional properties:
+- amd,speed-set: Speed capabilities of the device
+ 0 - 1GbE and 10GbE (default)
+ 1 - 2.5GbE and 10GbE
+
Example:
xgbe_phy@e1240800 {
compatible = "amd,xgbe-phy-seattle-v1a", "ethernet-phy-ieee802.3-c45";
reg = <0 0xe1240800 0 0x00400>,
<0 0xe1250000 0 0x00060>,
<0 0xe1250080 0 0x00004>;
+ amd,speed-set = <0>;
};
diff --git a/dts/Bindings/net/amd-xgbe.txt b/dts/Bindings/net/amd-xgbe.txt
index ea0c7908a3..41354f730b 100644
--- a/dts/Bindings/net/amd-xgbe.txt
+++ b/dts/Bindings/net/amd-xgbe.txt
@@ -8,16 +8,21 @@ Required properties:
- interrupt-parent: Should be the phandle for the interrupt controller
that services interrupts for this device
- interrupts: Should contain the amd-xgbe interrupt
-- clocks: Should be the DMA clock for the amd-xgbe device (used for
- calculating the correct Rx interrupt watchdog timer value on a DMA
- channel for coalescing)
-- clock-names: Should be the name of the DMA clock, "dma_clk"
+- clocks:
+ - DMA clock for the amd-xgbe device (used for calculating the
+ correct Rx interrupt watchdog timer value on a DMA channel
+ for coalescing)
+ - PTP clock for the amd-xgbe device
+- clock-names: Should be the names of the clocks
+ - "dma_clk" for the DMA clock
+ - "ptp_clk" for the PTP clock
- phy-handle: See ethernet.txt file in the same directory
- phy-mode: See ethernet.txt file in the same directory
Optional properties:
- mac-address: mac address to be assigned to the device. Can be overridden
by UEFI.
+- dma-coherent: Present if dma operations are coherent
Example:
xgbe@e0700000 {
@@ -26,8 +31,8 @@ Example:
<0 0xe0780000 0 0x80000>;
interrupt-parent = <&gic>;
interrupts = <0 325 4>;
- clocks = <&xgbe_clk>;
- clock-names = "dma_clk";
+ clocks = <&xgbe_dma_clk>, <&xgbe_ptp_clk>;
+ clock-names = "dma_clk", "ptp_clk";
phy-handle = <&phy>;
phy-mode = "xgmii";
mac-address = [ 02 a1 a2 a3 a4 a5 ];
diff --git a/dts/Bindings/net/apm-xgene-enet.txt b/dts/Bindings/net/apm-xgene-enet.txt
new file mode 100644
index 0000000000..ebcad25efd
--- /dev/null
+++ b/dts/Bindings/net/apm-xgene-enet.txt
@@ -0,0 +1,66 @@
+APM X-Gene SoC Ethernet nodes
+
+Ethernet nodes are defined to describe on-chip ethernet interfaces in
+APM X-Gene SoC.
+
+Required properties:
+- compatible: Should be "apm,xgene-enet"
+- reg: Address and length of the register set for the device. It contains the
+ information of registers in the same order as described by reg-names
+- reg-names: Should contain the register set names
+ - "enet_csr": Ethernet control and status register address space
+ - "ring_csr": Descriptor ring control and status register address space
+ - "ring_cmd": Descriptor ring command register address space
+- interrupts: Ethernet main interrupt
+- clocks: Reference to the clock entry.
+- local-mac-address: MAC address assigned to this device
+- phy-connection-type: Interface type between ethernet device and PHY device
+- phy-handle: Reference to a PHY node connected to this device
+
+- mdio: Device tree subnode with the following required properties:
+ - compatible: Must be "apm,xgene-mdio".
+ - #address-cells: Must be <1>.
+ - #size-cells: Must be <0>.
+
+ For the phy on the mdio bus, there must be a node with the following fields:
+ - compatible: PHY identifier. Please refer ./phy.txt for the format.
+ - reg: The ID number for the phy.
+
+Optional properties:
+- status: Should be "ok" or "disabled" for enabled/disabled. Default is "ok".
+
+Example:
+ menetclk: menetclk {
+ compatible = "apm,xgene-device-clock";
+ clock-output-names = "menetclk";
+ status = "ok";
+ };
+
+ menet: ethernet@17020000 {
+ compatible = "apm,xgene-enet";
+ status = "disabled";
+ reg = <0x0 0x17020000 0x0 0xd100>,
+ <0x0 0X17030000 0x0 0X400>,
+ <0x0 0X10000000 0x0 0X200>;
+ reg-names = "enet_csr", "ring_csr", "ring_cmd";
+ interrupts = <0x0 0x3c 0x4>;
+ clocks = <&menetclk 0>;
+ local-mac-address = [00 01 73 00 00 01];
+ phy-connection-type = "rgmii";
+ phy-handle = <&menetphy>;
+ mdio {
+ compatible = "apm,xgene-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ menetphy: menetphy@3 {
+ compatible = "ethernet-phy-id001c.c915";
+ reg = <0x3>;
+ };
+
+ };
+ };
+
+/* Board-specific peripheral configurations */
+&menet {
+ status = "ok";
+};
diff --git a/dts/Bindings/net/broadcom-systemport.txt b/dts/Bindings/net/broadcom-systemport.txt
index c183ea90d9..aa7ad62225 100644
--- a/dts/Bindings/net/broadcom-systemport.txt
+++ b/dts/Bindings/net/broadcom-systemport.txt
@@ -4,7 +4,8 @@ Required properties:
- compatible: should be one of "brcm,systemport-v1.00" or "brcm,systemport"
- reg: address and length of the register set for the device.
- interrupts: interrupts for the device, first cell must be for the the rx
- interrupts, and the second cell should be for the transmit queues
+ interrupts, and the second cell should be for the transmit queues. An
+ optional third interrupt cell for Wake-on-LAN can be specified
- local-mac-address: Ethernet MAC address (48 bits) of this adapter
- phy-mode: Should be a string describing the PHY interface to the
Ethernet switch/PHY, see Documentation/devicetree/bindings/net/ethernet.txt
diff --git a/dts/Bindings/net/davinci-mdio.txt b/dts/Bindings/net/davinci-mdio.txt
index 72efaaf764..0369e25aab 100644
--- a/dts/Bindings/net/davinci-mdio.txt
+++ b/dts/Bindings/net/davinci-mdio.txt
@@ -1,8 +1,8 @@
-TI SoC Davinci MDIO Controller Device Tree Bindings
+TI SoC Davinci/Keystone2 MDIO Controller Device Tree Bindings
---------------------------------------------------
Required properties:
-- compatible : Should be "ti,davinci_mdio"
+- compatible : Should be "ti,davinci_mdio" or "ti,keystone_mdio"
- reg : physical base address and size of the davinci mdio
registers map
- bus_freq : Mdio Bus frequency
@@ -19,7 +19,7 @@ file.
Examples:
mdio: davinci_mdio@4A101000 {
- compatible = "ti,cpsw";
+ compatible = "ti,davinci_mdio";
reg = <0x4A101000 0x1000>;
bus_freq = <1000000>;
};
@@ -27,7 +27,7 @@ Examples:
(or)
mdio: davinci_mdio@4A101000 {
- compatible = "ti,cpsw";
+ compatible = "ti,davinci_mdio";
ti,hwmods = "davinci_mdio";
bus_freq = <1000000>;
};
diff --git a/dts/Bindings/net/fsl-fec.txt b/dts/Bindings/net/fsl-fec.txt
index 6bc84adb10..8a2c7b55ec 100644
--- a/dts/Bindings/net/fsl-fec.txt
+++ b/dts/Bindings/net/fsl-fec.txt
@@ -12,7 +12,14 @@ Optional properties:
only if property "phy-reset-gpios" is available. Missing the property
will have the duration be 1 millisecond. Numbers greater than 1000 are
invalid and 1 millisecond will be used instead.
-- phy-supply: regulator that powers the Ethernet PHY.
+- phy-supply : regulator that powers the Ethernet PHY.
+- phy-handle : phandle to the PHY device connected to this device.
+- fixed-link : Assume a fixed link. See fixed-link.txt in the same directory.
+ Use instead of phy-handle.
+
+Optional subnodes:
+- mdio : specifies the mdio bus in the FEC, used as a container for phy nodes
+ according to phy.txt in the same directory
Example:
@@ -25,3 +32,23 @@ ethernet@83fec000 {
local-mac-address = [00 04 9F 01 1B B9];
phy-supply = <&reg_fec_supply>;
};
+
+Example with phy specified:
+
+ethernet@83fec000 {
+ compatible = "fsl,imx51-fec", "fsl,imx27-fec";
+ reg = <0x83fec000 0x4000>;
+ interrupts = <87>;
+ phy-mode = "mii";
+ phy-reset-gpios = <&gpio2 14 0>; /* GPIO2_14 */
+ local-mac-address = [00 04 9F 01 1B B9];
+ phy-supply = <&reg_fec_supply>;
+ phy-handle = <&ethphy>;
+ mdio {
+ ethphy: ethernet-phy@6 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <6>;
+ max-speed = <100>;
+ };
+ };
+};
diff --git a/dts/Bindings/net/ieee802154/cc2520.txt b/dts/Bindings/net/ieee802154/cc2520.txt
new file mode 100644
index 0000000000..0071883c08
--- /dev/null
+++ b/dts/Bindings/net/ieee802154/cc2520.txt
@@ -0,0 +1,29 @@
+*CC2520 IEEE 802.15.4 Compatible Radio*
+
+Required properties:
+ - compatible: should be "ti,cc2520"
+ - spi-max-frequency: maximal bus speed (8000000), should be set to 4000000 depends
+ sync or async operation mode
+ - reg: the chipselect index
+ - pinctrl-0: pin control group to be used for this controller.
+ - pinctrl-names: must contain a "default" entry.
+ - fifo-gpio: GPIO spec for the FIFO pin
+ - fifop-gpio: GPIO spec for the FIFOP pin
+ - sfd-gpio: GPIO spec for the SFD pin
+ - cca-gpio: GPIO spec for the CCA pin
+ - vreg-gpio: GPIO spec for the VREG pin
+ - reset-gpio: GPIO spec for the RESET pin
+Example:
+ cc2520@0 {
+ compatible = "ti,cc2520";
+ reg = <0>;
+ spi-max-frequency = <4000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cc2520_cape_pins>;
+ fifo-gpio = <&gpio1 18 0>;
+ fifop-gpio = <&gpio1 19 0>;
+ sfd-gpio = <&gpio1 13 0>;
+ cca-gpio = <&gpio1 16 0>;
+ vreg-gpio = <&gpio0 31 0>;
+ reset-gpio = <&gpio1 12 0>;
+ };
diff --git a/dts/Bindings/net/marvell-pp2.txt b/dts/Bindings/net/marvell-pp2.txt
new file mode 100644
index 0000000000..aa4f4230bf
--- /dev/null
+++ b/dts/Bindings/net/marvell-pp2.txt
@@ -0,0 +1,61 @@
+* Marvell Armada 375 Ethernet Controller (PPv2)
+
+Required properties:
+
+- compatible: should be "marvell,armada-375-pp2"
+- reg: addresses and length of the register sets for the device.
+ Must contain the following register sets:
+ - common controller registers
+ - LMS registers
+ In addition, at least one port register set is required.
+- clocks: a pointer to the reference clocks for this device, consequently:
+ - main controller clock
+ - GOP clock
+- clock-names: names of used clocks, must be "pp_clk" and "gop_clk".
+
+The ethernet ports are represented by subnodes. At least one port is
+required.
+
+Required properties (port):
+
+- interrupts: interrupt for the port
+- port-id: should be '0' or '1' for ethernet ports, and '2' for the
+ loopback port
+- phy-mode: See ethernet.txt file in the same directory
+
+Optional properties (port):
+
+- marvell,loopback: port is loopback mode
+- phy: a phandle to a phy node defining the PHY address (as the reg
+ property, a single integer). Note: if this property isn't present,
+ then fixed link is assumed, and the 'fixed-link' property is
+ mandatory.
+
+Example:
+
+ethernet@f0000 {
+ compatible = "marvell,armada-375-pp2";
+ reg = <0xf0000 0xa000>,
+ <0xc0000 0x3060>,
+ <0xc4000 0x100>,
+ <0xc5000 0x100>;
+ clocks = <&gateclk 3>, <&gateclk 19>;
+ clock-names = "pp_clk", "gop_clk";
+ status = "okay";
+
+ eth0: eth0@c4000 {
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ port-id = <0>;
+ status = "okay";
+ phy = <&phy0>;
+ phy-mode = "gmii";
+ };
+
+ eth1: eth1@c5000 {
+ interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+ port-id = <1>;
+ status = "okay";
+ phy = <&phy3>;
+ phy-mode = "gmii";
+ };
+};
diff --git a/dts/Bindings/net/nfc/st21nfcb.txt b/dts/Bindings/net/nfc/st21nfcb.txt
new file mode 100644
index 0000000000..3b58ae4803
--- /dev/null
+++ b/dts/Bindings/net/nfc/st21nfcb.txt
@@ -0,0 +1,33 @@
+* STMicroelectronics SAS. ST21NFCB NFC Controller
+
+Required properties:
+- compatible: Should be "st,st21nfcb_i2c".
+- clock-frequency: I²C work frequency.
+- reg: address on the bus
+- interrupt-parent: phandle for the interrupt gpio controller
+- interrupts: GPIO interrupt to which the chip is connected
+- reset-gpios: Output GPIO pin used to reset the ST21NFCB
+
+Optional SoC Specific Properties:
+- pinctrl-names: Contains only one value - "default".
+- pintctrl-0: Specifies the pin control groups used for this controller.
+
+Example (for ARM-based BeagleBoard xM with ST21NFCB on I2C2):
+
+&i2c2 {
+
+ status = "okay";
+
+ st21nfcb: st21nfcb@8 {
+
+ compatible = "st,st21nfcb_i2c";
+
+ reg = <0x08>;
+ clock-frequency = <400000>;
+
+ interrupt-parent = <&gpio5>;
+ interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+
+ reset-gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;
+ };
+};
diff --git a/dts/Bindings/net/sh_eth.txt b/dts/Bindings/net/sh_eth.txt
index e7106b50db..34d4db1a4e 100644
--- a/dts/Bindings/net/sh_eth.txt
+++ b/dts/Bindings/net/sh_eth.txt
@@ -9,6 +9,7 @@ Required properties:
"renesas,ether-r8a7779" if the device is a part of R8A7779 SoC.
"renesas,ether-r8a7790" if the device is a part of R8A7790 SoC.
"renesas,ether-r8a7791" if the device is a part of R8A7791 SoC.
+ "renesas,ether-r8a7794" if the device is a part of R8A7794 SoC.
"renesas,ether-r7s72100" if the device is a part of R7S72100 SoC.
- reg: offset and length of (1) the E-DMAC/feLic register block (required),
(2) the TSU register block (optional).
diff --git a/dts/Bindings/net/stmmac.txt b/dts/Bindings/net/stmmac.txt
index a2acd2b26b..9b03c57563 100644
--- a/dts/Bindings/net/stmmac.txt
+++ b/dts/Bindings/net/stmmac.txt
@@ -25,6 +25,10 @@ Required properties:
- snps,force_sf_dma_mode Force DMA to use the Store and Forward
mode for both tx and rx. This flag is
ignored if force_thresh_dma_mode is set.
+- snps,multicast-filter-bins: Number of multicast filter hash bins
+ supported by this device instance
+- snps,perfect-filter-entries: Number of perfect filter entries supported
+ by this device instance
Optional properties:
- resets: Should contain a phandle to the STMMAC reset signal, if any
@@ -47,6 +51,8 @@ Examples:
mac-address = [000000000000]; /* Filled in by U-Boot */
max-frame-size = <3800>;
phy-mode = "gmii";
+ snps,multicast-filter-bins = <256>;
+ snps,perfect-filter-entries = <128>;
clocks = <&clock>;
clock-names = "stmmaceth">;
};
diff --git a/dts/Bindings/net/wireless/brcm,bcm43xx-fmac.txt b/dts/Bindings/net/wireless/brcm,bcm43xx-fmac.txt
new file mode 100644
index 0000000000..5dbf169cd8
--- /dev/null
+++ b/dts/Bindings/net/wireless/brcm,bcm43xx-fmac.txt
@@ -0,0 +1,41 @@
+Broadcom BCM43xx Fullmac wireless SDIO devices
+
+This node provides properties for controlling the Broadcom wireless device. The
+node is expected to be specified as a child node to the SDIO controller that
+connects the device to the system.
+
+Required properties:
+
+ - compatible : Should be "brcm,bcm4329-fmac".
+
+Optional properties:
+ - brcm,drive-strength : drive strength used for SDIO pins on device in mA
+ (default = 6).
+ - interrupt-parent : the phandle for the interrupt controller to which the
+ device interrupts are connected.
+ - interrupts : specifies attributes for the out-of-band interrupt (host-wake).
+ When not specified the device will use in-band SDIO interrupts.
+ - interrupt-names : name of the out-of-band interrupt, which must be set
+ to "host-wake".
+
+Example:
+
+mmc3: mmc@01c12000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc3_pins_a>;
+ vmmc-supply = <&reg_vmmc3>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+
+ brcmf: bcrmf@1 {
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+ interrupt-parent = <&pio>;
+ interrupts = <10 8>; /* PH10 / EINT10 */
+ interrupt-names = "host-wake";
+ };
+};
diff --git a/dts/Bindings/panel/auo,b133htn01.txt b/dts/Bindings/panel/auo,b133htn01.txt
new file mode 100644
index 0000000000..302226b5bb
--- /dev/null
+++ b/dts/Bindings/panel/auo,b133htn01.txt
@@ -0,0 +1,7 @@
+AU Optronics Corporation 13.3" FHD (1920x1080) color TFT-LCD panel
+
+Required properties:
+- compatible: should be "auo,b133htn01"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/dts/Bindings/panel/foxlink,fl500wvr00-a0t.txt b/dts/Bindings/panel/foxlink,fl500wvr00-a0t.txt
new file mode 100644
index 0000000000..b47f9d87bc
--- /dev/null
+++ b/dts/Bindings/panel/foxlink,fl500wvr00-a0t.txt
@@ -0,0 +1,7 @@
+Foxlink Group 5" WVGA TFT LCD panel
+
+Required properties:
+- compatible: should be "foxlink,fl500wvr00-a0t"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/dts/Bindings/panel/innolux,n116bge.txt b/dts/Bindings/panel/innolux,n116bge.txt
new file mode 100644
index 0000000000..081bb939ed
--- /dev/null
+++ b/dts/Bindings/panel/innolux,n116bge.txt
@@ -0,0 +1,7 @@
+Innolux Corporation 11.6" WXGA (1366x768) TFT LCD panel
+
+Required properties:
+- compatible: should be "innolux,n116bge"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/dts/Bindings/panel/innolux,n156bge-l21.txt b/dts/Bindings/panel/innolux,n156bge-l21.txt
new file mode 100644
index 0000000000..7825844aaf
--- /dev/null
+++ b/dts/Bindings/panel/innolux,n156bge-l21.txt
@@ -0,0 +1,7 @@
+InnoLux 15.6" WXGA TFT LCD panel
+
+Required properties:
+- compatible: should be "innolux,n156bge-l21"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/dts/Bindings/pci/nvidia,tegra20-pcie.txt b/dts/Bindings/pci/nvidia,tegra20-pcie.txt
index c300391e8d..0823362548 100644
--- a/dts/Bindings/pci/nvidia,tegra20-pcie.txt
+++ b/dts/Bindings/pci/nvidia,tegra20-pcie.txt
@@ -14,9 +14,6 @@ Required properties:
- interrupt-names: Must include the following entries:
"intr": The Tegra interrupt that is asserted for controller interrupts
"msi": The Tegra interrupt that is asserted when an MSI is received
-- pex-clk-supply: Supply voltage for internal reference clock
-- vdd-supply: Power supply for controller (1.05V)
-- avdd-supply: Power supply for controller (1.05V) (not required for Tegra20)
- bus-range: Range of bus numbers associated with this controller
- #address-cells: Address representation for root ports (must be 3)
- cell 0 specifies the bus and device numbers of the root port:
@@ -60,6 +57,33 @@ Required properties:
- afi
- pcie_x
+Power supplies for Tegra20:
+- avdd-pex-supply: Power supply for analog PCIe logic. Must supply 1.05 V.
+- vdd-pex-supply: Power supply for digital PCIe I/O. Must supply 1.05 V.
+- avdd-pex-pll-supply: Power supply for dedicated (internal) PCIe PLL. Must
+ supply 1.05 V.
+- avdd-plle-supply: Power supply for PLLE, which is shared with SATA. Must
+ supply 1.05 V.
+- vddio-pex-clk-supply: Power supply for PCIe clock. Must supply 3.3 V.
+
+Power supplies for Tegra30:
+- Required:
+ - avdd-pex-pll-supply: Power supply for dedicated (internal) PCIe PLL. Must
+ supply 1.05 V.
+ - avdd-plle-supply: Power supply for PLLE, which is shared with SATA. Must
+ supply 1.05 V.
+ - vddio-pex-ctl-supply: Power supply for PCIe control I/O partition. Must
+ supply 1.8 V.
+ - hvdd-pex-supply: High-voltage supply for PCIe I/O and PCIe output clocks.
+ Must supply 3.3 V.
+- Optional:
+ - If lanes 0 to 3 are used:
+ - avdd-pexa-supply: Power supply for analog PCIe logic. Must supply 1.05 V.
+ - vdd-pexa-supply: Power supply for digital PCIe I/O. Must supply 1.05 V.
+ - If lanes 4 or 5 are used:
+ - avdd-pexb-supply: Power supply for analog PCIe logic. Must supply 1.05 V.
+ - vdd-pexb-supply: Power supply for digital PCIe I/O. Must supply 1.05 V.
+
Root ports are defined as subnodes of the PCIe controller node.
Required properties:
diff --git a/dts/Bindings/pci/spear13xx-pcie.txt b/dts/Bindings/pci/spear13xx-pcie.txt
new file mode 100644
index 0000000000..49ea76da77
--- /dev/null
+++ b/dts/Bindings/pci/spear13xx-pcie.txt
@@ -0,0 +1,14 @@
+SPEAr13XX PCIe DT detail:
+================================
+
+SPEAr13XX uses synopsis designware PCIe controller and ST MiPHY as phy
+controller.
+
+Required properties:
+- compatible : should be "st,spear1340-pcie", "snps,dw-pcie".
+- phys : phandle to phy node associated with pcie controller
+- phy-names : must be "pcie-phy"
+- All other definitions as per generic PCI bindings
+
+ Optional properties:
+- st,pcie-is-gen1 indicates that forced gen1 initialization is needed.
diff --git a/dts/Bindings/phy/berlin-sata-phy.txt b/dts/Bindings/phy/berlin-sata-phy.txt
new file mode 100644
index 0000000000..88f8c23384
--- /dev/null
+++ b/dts/Bindings/phy/berlin-sata-phy.txt
@@ -0,0 +1,34 @@
+Berlin SATA PHY
+---------------
+
+Required properties:
+- compatible: should be "marvell,berlin2q-sata-phy"
+- address-cells: should be 1
+- size-cells: should be 0
+- phy-cells: from the generic PHY bindings, must be 1
+- reg: address and length of the register
+- clocks: reference to the clock entry
+
+Sub-nodes:
+Each PHY should be represented as a sub-node.
+
+Sub-nodes required properties:
+- reg: the PHY number
+
+Example:
+ sata_phy: phy@f7e900a0 {
+ compatible = "marvell,berlin2q-sata-phy";
+ reg = <0xf7e900a0 0x200>;
+ clocks = <&chip CLKID_SATA>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #phy-cells = <1>;
+
+ sata-phy@0 {
+ reg = <0>;
+ };
+
+ sata-phy@1 {
+ reg = <1>;
+ };
+ };
diff --git a/dts/Bindings/phy/hix5hd2-phy.txt b/dts/Bindings/phy/hix5hd2-phy.txt
new file mode 100644
index 0000000000..296168b74d
--- /dev/null
+++ b/dts/Bindings/phy/hix5hd2-phy.txt
@@ -0,0 +1,22 @@
+Hisilicon hix5hd2 SATA PHY
+-----------------------
+
+Required properties:
+- compatible: should be "hisilicon,hix5hd2-sata-phy"
+- reg: offset and length of the PHY registers
+- #phy-cells: must be 0
+Refer to phy/phy-bindings.txt for the generic PHY binding properties
+
+Optional Properties:
+- hisilicon,peripheral-syscon: phandle of syscon used to control peripheral.
+- hisilicon,power-reg: offset and bit number within peripheral-syscon,
+ register of controlling sata power supply.
+
+Example:
+ sata_phy: phy@f9900000 {
+ compatible = "hisilicon,hix5hd2-sata-phy";
+ reg = <0xf9900000 0x10000>;
+ #phy-cells = <0>;
+ hisilicon,peripheral-syscon = <&peripheral_ctrl>;
+ hisilicon,power-reg = <0x8 10>;
+ };
diff --git a/dts/Bindings/phy/phy-bindings.txt b/dts/Bindings/phy/phy-bindings.txt
index 8ae844fc0c..2aa1840200 100644
--- a/dts/Bindings/phy/phy-bindings.txt
+++ b/dts/Bindings/phy/phy-bindings.txt
@@ -10,6 +10,10 @@ Required Properties:
provider can use the values in cells to find the appropriate
PHY.
+Optional Properties:
+phy-supply: Phandle to a regulator that provides power to the PHY. This
+ regulator will be managed during the PHY power on/off sequence.
+
For example:
phys: phy {
diff --git a/dts/Bindings/phy/phy-miphy365x.txt b/dts/Bindings/phy/phy-miphy365x.txt
new file mode 100644
index 0000000000..42c880886c
--- /dev/null
+++ b/dts/Bindings/phy/phy-miphy365x.txt
@@ -0,0 +1,76 @@
+STMicroelectronics STi MIPHY365x PHY binding
+============================================
+
+This binding describes a miphy device that is used to control PHY hardware
+for SATA and PCIe.
+
+Required properties (controller (parent) node):
+- compatible : Should be "st,miphy365x-phy"
+- st,syscfg : Should be a phandle of the system configuration register group
+ which contain the SATA, PCIe mode setting bits
+
+Required nodes : A sub-node is required for each channel the controller
+ provides. Address range information including the usual
+ 'reg' and 'reg-names' properties are used inside these
+ nodes to describe the controller's topology. These nodes
+ are translated by the driver's .xlate() function.
+
+Required properties (port (child) node):
+- #phy-cells : Should be 1 (See second example)
+ Cell after port phandle is device type from:
+ - MIPHY_TYPE_SATA
+ - MIPHY_TYPE_PCI
+- reg : Address and length of register sets for each device in
+ "reg-names"
+- reg-names : The names of the register addresses corresponding to the
+ registers filled in "reg":
+ - sata: For SATA devices
+ - pcie: For PCIe devices
+ - syscfg: To specify the syscfg based config register
+
+Optional properties (port (child) node):
+- st,sata-gen : Generation of locally attached SATA IP. Expected values
+ are {1,2,3). If not supplied generation 1 hardware will
+ be expected
+- st,pcie-tx-pol-inv : Bool property to invert the polarity PCIe Tx (Txn/Txp)
+- st,sata-tx-pol-inv : Bool property to invert the polarity SATA Tx (Txn/Txp)
+
+Example:
+
+ miphy365x_phy: miphy365x@fe382000 {
+ compatible = "st,miphy365x-phy";
+ st,syscfg = <&syscfg_rear>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ phy_port0: port@fe382000 {
+ reg = <0xfe382000 0x100>, <0xfe394000 0x100>, <0x824 0x4>;
+ reg-names = "sata", "pcie", "syscfg";
+ #phy-cells = <1>;
+ st,sata-gen = <3>;
+ };
+
+ phy_port1: port@fe38a000 {
+ reg = <0xfe38a000 0x100>, <0xfe804000 0x100>, <0x828 0x4>;;
+ reg-names = "sata", "pcie", "syscfg";
+ #phy-cells = <1>;
+ st,pcie-tx-pol-inv;
+ };
+ };
+
+Specifying phy control of devices
+=================================
+
+Device nodes should specify the configuration required in their "phys"
+property, containing a phandle to the phy port node and a device type.
+
+Example:
+
+#include <dt-bindings/phy/phy-miphy365x.h>
+
+ sata0: sata@fe380000 {
+ ...
+ phys = <&phy_port0 MIPHY_TYPE_SATA>;
+ ...
+ };
diff --git a/dts/Bindings/phy/qcom-apq8064-sata-phy.txt b/dts/Bindings/phy/qcom-apq8064-sata-phy.txt
new file mode 100644
index 0000000000..952f6c96ba
--- /dev/null
+++ b/dts/Bindings/phy/qcom-apq8064-sata-phy.txt
@@ -0,0 +1,24 @@
+Qualcomm APQ8064 SATA PHY Controller
+------------------------------------
+
+SATA PHY nodes are defined to describe on-chip SATA Physical layer controllers.
+Each SATA PHY controller should have its own node.
+
+Required properties:
+- compatible: compatible list, contains "qcom,apq8064-sata-phy".
+- reg: offset and length of the SATA PHY register set;
+- #phy-cells: must be zero
+- clocks: a list of phandles and clock-specifier pairs, one for each entry in
+ clock-names.
+- clock-names: must be "cfg" for phy config clock.
+
+Example:
+ sata_phy: sata-phy@1b400000 {
+ compatible = "qcom,apq8064-sata-phy";
+ reg = <0x1b400000 0x200>;
+
+ clocks = <&gcc SATA_PHY_CFG_CLK>;
+ clock-names = "cfg";
+
+ #phy-cells = <0>;
+ };
diff --git a/dts/Bindings/phy/qcom-ipq806x-sata-phy.txt b/dts/Bindings/phy/qcom-ipq806x-sata-phy.txt
new file mode 100644
index 0000000000..76bfbd0562
--- /dev/null
+++ b/dts/Bindings/phy/qcom-ipq806x-sata-phy.txt
@@ -0,0 +1,23 @@
+Qualcomm IPQ806x SATA PHY Controller
+------------------------------------
+
+SATA PHY nodes are defined to describe on-chip SATA Physical layer controllers.
+Each SATA PHY controller should have its own node.
+
+Required properties:
+- compatible: compatible list, contains "qcom,ipq806x-sata-phy"
+- reg: offset and length of the SATA PHY register set;
+- #phy-cells: must be zero
+- clocks: must be exactly one entry
+- clock-names: must be "cfg"
+
+Example:
+ sata_phy: sata-phy@1b400000 {
+ compatible = "qcom,ipq806x-sata-phy";
+ reg = <0x1b400000 0x200>;
+
+ clocks = <&gcc SATA_PHY_CFG_CLK>;
+ clock-names = "cfg";
+
+ #phy-cells = <0>;
+ };
diff --git a/dts/Bindings/phy/samsung-phy.txt b/dts/Bindings/phy/samsung-phy.txt
index 2049261d8c..7a6feea2a4 100644
--- a/dts/Bindings/phy/samsung-phy.txt
+++ b/dts/Bindings/phy/samsung-phy.txt
@@ -26,9 +26,11 @@ Samsung S5P/EXYNOS SoC series USB PHY
Required properties:
- compatible : should be one of the listed compatibles:
+ - "samsung,exynos3250-usb2-phy"
- "samsung,exynos4210-usb2-phy"
- "samsung,exynos4x12-usb2-phy"
- "samsung,exynos5250-usb2-phy"
+ - "samsung,s5pv210-usb2-phy"
- reg : a list of registers used by phy driver
- first and obligatory is the location of phy modules registers
- samsung,sysreg-phandle - handle to syscon used to control the system registers
@@ -46,6 +48,7 @@ and Exynos 4212) it is as follows:
1 - USB host ("host"),
2 - HSIC0 ("hsic0"),
3 - HSIC1 ("hsic1"),
+Exynos3250 has only USB device phy available as phy 0.
Exynos 4210 and Exynos 4212 use mode switching and require that mode switch
register is supplied.
diff --git a/dts/Bindings/phy/st-spear-miphy.txt b/dts/Bindings/phy/st-spear-miphy.txt
new file mode 100644
index 0000000000..2a6bfdcc09
--- /dev/null
+++ b/dts/Bindings/phy/st-spear-miphy.txt
@@ -0,0 +1,15 @@
+ST SPEAr miphy DT details
+=========================
+
+ST Microelectronics SPEAr miphy is a phy controller supporting PCIe and SATA.
+
+Required properties:
+- compatible : should be "st,spear1310-miphy" or "st,spear1340-miphy"
+- reg : offset and length of the PHY register set.
+- misc: phandle for the syscon node to access misc registers
+- #phy-cells : from the generic PHY bindings, must be 1.
+ - cell[1]: 0 if phy used for SATA, 1 for PCIe.
+
+Optional properties:
+- phy-id: Instance id of the phy. Only required when there are multiple phys
+ present on a implementation.
diff --git a/dts/Bindings/phy/ti-phy.txt b/dts/Bindings/phy/ti-phy.txt
index 9ce458f329..305e3df3d9 100644
--- a/dts/Bindings/phy/ti-phy.txt
+++ b/dts/Bindings/phy/ti-phy.txt
@@ -9,15 +9,17 @@ Required properties:
e.g. USB2_PHY on OMAP5.
"ti,control-phy-pipe3" - if it has DPLL and individual Rx & Tx power control
e.g. USB3 PHY and SATA PHY on OMAP5.
+ "ti,control-phy-pcie" - for pcie to support external clock for pcie and to
+ set PCS delay value.
+ e.g. PCIE PHY in DRA7x
"ti,control-phy-usb2-dra7" - if it has power down register like USB2 PHY on
DRA7 platform.
"ti,control-phy-usb2-am437" - if it has power down register like USB2 PHY on
AM437 platform.
- - reg : Address and length of the register set for the device. It contains
- the address of "otghs_control" for control-phy-otghs or "power" register
- for other types.
- - reg-names: should be "otghs_control" control-phy-otghs and "power" for
- other types.
+ - reg : register ranges as listed in the reg-names property
+ - reg-names: "otghs_control" for control-phy-otghs
+ "power", "pcie_pcs" and "control_sma" for control-phy-pcie
+ "power" for all other types
omap_control_usb: omap-control-usb@4a002300 {
compatible = "ti,control-phy-otghs";
@@ -56,8 +58,8 @@ usb2phy@4a0ad080 {
TI PIPE3 PHY
Required properties:
- - compatible: Should be "ti,phy-usb3" or "ti,phy-pipe3-sata".
- "ti,omap-usb3" is deprecated.
+ - compatible: Should be "ti,phy-usb3", "ti,phy-pipe3-sata" or
+ "ti,phy-pipe3-pcie. "ti,omap-usb3" is deprecated.
- reg : Address and length of the register set for the device.
- reg-names: The names of the register addresses corresponding to the registers
filled in "reg".
@@ -69,10 +71,17 @@ Required properties:
* "wkupclk" - wakeup clock.
* "sysclk" - system clock.
* "refclk" - reference clock.
+ * "dpll_ref" - external dpll ref clk
+ * "dpll_ref_m2" - external dpll ref clk
+ * "phy-div" - divider for apll
+ * "div-clk" - apll clock
Optional properties:
- ctrl-module : phandle of the control module used by PHY driver to power on
the PHY.
+ - id: If there are multiple instance of the same type, in order to
+ differentiate between each instance "id" can be used (e.g., multi-lane PCIe
+ PHY). If "id" is not provided, it is set to default value of '1'.
This is usually a subnode of ocp2scp to which it is connected.
diff --git a/dts/Bindings/pinctrl/allwinner,sunxi-pinctrl.txt b/dts/Bindings/pinctrl/allwinner,sunxi-pinctrl.txt
index d8d065608e..93ce12eb42 100644
--- a/dts/Bindings/pinctrl/allwinner,sunxi-pinctrl.txt
+++ b/dts/Bindings/pinctrl/allwinner,sunxi-pinctrl.txt
@@ -13,6 +13,8 @@ Required properties:
"allwinner,sun6i-a31-pinctrl"
"allwinner,sun6i-a31-r-pinctrl"
"allwinner,sun7i-a20-pinctrl"
+ "allwinner,sun8i-a23-pinctrl"
+ "allwinner,sun8i-a23-r-pinctrl"
- reg: Should contain the register physical address and length for the
pin controller.
diff --git a/dts/Bindings/pinctrl/nvidia,tegra124-xusb-padctl.txt b/dts/Bindings/pinctrl/nvidia,tegra124-xusb-padctl.txt
new file mode 100644
index 0000000000..2f9c0bd664
--- /dev/null
+++ b/dts/Bindings/pinctrl/nvidia,tegra124-xusb-padctl.txt
@@ -0,0 +1,127 @@
+Device tree binding for NVIDIA Tegra XUSB pad controller
+========================================================
+
+The Tegra XUSB pad controller manages a set of lanes, each of which can be
+assigned to one out of a set of different pads. Some of these pads have an
+associated PHY that must be powered up before the pad can be used.
+
+This document defines the device-specific binding for the XUSB pad controller.
+
+Refer to pinctrl-bindings.txt in this directory for generic information about
+pin controller device tree bindings and ../phy/phy-bindings.txt for details on
+how to describe and reference PHYs in device trees.
+
+Required properties:
+--------------------
+- compatible: should be "nvidia,tegra124-xusb-padctl"
+- reg: Physical base address and length of the controller's registers.
+- resets: Must contain an entry for each entry in reset-names.
+ See ../reset/reset.txt for details.
+- reset-names: Must include the following entries:
+ - padctl
+- #phy-cells: Should be 1. The specifier is the index of the PHY to reference.
+ See <dt-bindings/pinctrl/pinctrl-tegra-xusb.h> for the list of valid values.
+
+Lane muxing:
+------------
+
+Child nodes contain the pinmux configurations following the conventions from
+the pinctrl-bindings.txt document. Typically a single, static configuration is
+given and applied at boot time.
+
+Each subnode describes groups of lanes along with parameters and pads that
+they should be assigned to. The name of these subnodes is not important. All
+subnodes should be parsed solely based on their content.
+
+Each subnode only applies the parameters that are explicitly listed. In other
+words, if a subnode that lists a function but no pin configuration parameters
+implies no information about any pin configuration parameters. Similarly, a
+subnode that describes only an IDDQ parameter implies no information about
+what function the pins are assigned to. For this reason even seemingly boolean
+values are actually tristates in this binding: unspecified, off or on.
+Unspecified is represented as an absent property, and off/on are represented
+as integer values 0 and 1.
+
+Required properties:
+- nvidia,lanes: An array of strings. Each string is the name of a lane.
+
+Optional properties:
+- nvidia,function: A string that is the name of the function (pad) that the
+ pin or group should be assigned to. Valid values for function names are
+ listed below.
+- nvidia,iddq: Enables IDDQ mode of the lane. (0: no, 1: yes)
+
+Note that not all of these properties are valid for all lanes. Lanes can be
+divided into three groups:
+
+ - otg-0, otg-1, otg-2:
+
+ Valid functions for this group are: "snps", "xusb", "uart", "rsvd".
+
+ The nvidia,iddq property does not apply to this group.
+
+ - ulpi-0, hsic-0, hsic-1:
+
+ Valid functions for this group are: "snps", "xusb".
+
+ The nvidia,iddq property does not apply to this group.
+
+ - pcie-0, pcie-1, pcie-2, pcie-3, pcie-4, sata-0:
+
+ Valid functions for this group are: "pcie", "usb3", "sata", "rsvd".
+
+
+Example:
+========
+
+SoC file extract:
+-----------------
+
+ padctl@0,7009f000 {
+ compatible = "nvidia,tegra124-xusb-padctl";
+ reg = <0x0 0x7009f000 0x0 0x1000>;
+ resets = <&tegra_car 142>;
+ reset-names = "padctl";
+
+ #phy-cells = <1>;
+ };
+
+Board file extract:
+-------------------
+
+ pcie-controller@0,01003000 {
+ ...
+
+ phys = <&padctl 0>;
+ phy-names = "pcie";
+
+ ...
+ };
+
+ ...
+
+ padctl: padctl@0,7009f000 {
+ pinctrl-0 = <&padctl_default>;
+ pinctrl-names = "default";
+
+ padctl_default: pinmux {
+ usb3 {
+ nvidia,lanes = "pcie-0", "pcie-1";
+ nvidia,function = "usb3";
+ nvidia,iddq = <0>;
+ };
+
+ pcie {
+ nvidia,lanes = "pcie-2", "pcie-3",
+ "pcie-4";
+ nvidia,function = "pcie";
+ nvidia,iddq = <0>;
+ };
+
+ sata {
+ nvidia,lanes = "sata-0";
+ nvidia,function = "sata";
+ nvidia,iddq = <0>;
+ };
+ };
+ };
diff --git a/dts/Bindings/pinctrl/qcom,apq8064-pinctrl.txt b/dts/Bindings/pinctrl/qcom,apq8064-pinctrl.txt
index 7181f925ac..0211c6d8a5 100644
--- a/dts/Bindings/pinctrl/qcom,apq8064-pinctrl.txt
+++ b/dts/Bindings/pinctrl/qcom,apq8064-pinctrl.txt
@@ -46,7 +46,7 @@ Valid values for pins are:
gpio0-gpio89
Valid values for function are:
- cam_mclk, codec_mic_i2s, codec_spkr_i2s, gsbi1, gsbi2, gsbi3, gsbi4,
+ cam_mclk, codec_mic_i2s, codec_spkr_i2s, gpio, gsbi1, gsbi2, gsbi3, gsbi4,
gsbi4_cam_i2c, gsbi5, gsbi5_spi_cs1, gsbi5_spi_cs2, gsbi5_spi_cs3, gsbi6,
gsbi6_spi_cs1, gsbi6_spi_cs2, gsbi6_spi_cs3, gsbi7, gsbi7_spi_cs1,
gsbi7_spi_cs2, gsbi7_spi_cs3, gsbi_cam_i2c, hdmi, mi2s, riva_bt, riva_fm,
diff --git a/dts/Bindings/pinctrl/qcom,ipq8064-pinctrl.txt b/dts/Bindings/pinctrl/qcom,ipq8064-pinctrl.txt
index e0d35a4098..e33e4dcdce 100644
--- a/dts/Bindings/pinctrl/qcom,ipq8064-pinctrl.txt
+++ b/dts/Bindings/pinctrl/qcom,ipq8064-pinctrl.txt
@@ -51,7 +51,7 @@ Valid values for qcom,pins are:
Valid values for function are:
- mdio, mi2s, pdm, ssbi, spmi, audio_pcm, gsbi1, gsbi2, gsbi4, gsbi5,
+ mdio, mi2s, pdm, ssbi, spmi, audio_pcm, gpio, gsbi1, gsbi2, gsbi4, gsbi5,
gsbi5_spi_cs1, gsbi5_spi_cs2, gsbi5_spi_cs3, gsbi6, gsbi7, nss_spi, sdc1,
spdif, nand, tsif1, tsif2, usb_fs_n, usb_fs, usb2_hsic, rgmii2, sata,
pcie1_rst, pcie1_prsnt, pcie1_pwren_n, pcie1_pwren, pcie1_pwrflt,
diff --git a/dts/Bindings/pinctrl/qcom,msm8960-pinctrl.txt b/dts/Bindings/pinctrl/qcom,msm8960-pinctrl.txt
new file mode 100644
index 0000000000..93b7de91b9
--- /dev/null
+++ b/dts/Bindings/pinctrl/qcom,msm8960-pinctrl.txt
@@ -0,0 +1,181 @@
+Qualcomm MSM8960 TLMM block
+
+This binding describes the Top Level Mode Multiplexer block found in the
+MSM8960 platform.
+
+- compatible:
+ Usage: required
+ Value type: <string>
+ Definition: must be "qcom,msm8960-pinctrl"
+
+- reg:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: the base address and size of the TLMM register space.
+
+- interrupts:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: should specify the TLMM summary IRQ.
+
+- interrupt-controller:
+ Usage: required
+ Value type: <none>
+ Definition: identifies this node as an interrupt controller
+
+- #interrupt-cells:
+ Usage: required
+ Value type: <u32>
+ Definition: must be 2. Specifying the pin number and flags, as defined
+ in <dt-bindings/interrupt-controller/irq.h>
+
+- gpio-controller:
+ Usage: required
+ Value type: <none>
+ Definition: identifies this node as a gpio controller
+
+- #gpio-cells:
+ Usage: required
+ Value type: <u32>
+ Definition: must be 2. Specifying the pin number and flags, as defined
+ in <dt-bindings/gpio/gpio.h>
+
+Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for
+a general description of GPIO and interrupt bindings.
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+The pin configuration nodes act as a container for an abitrary number of
+subnodes. Each of these subnodes represents some desired configuration for a
+pin, a group, or a list of pins or groups. This configuration can include the
+mux function to select on those pin(s)/group(s), and various pin configuration
+parameters, such as pull-up, drive strength, etc.
+
+
+PIN CONFIGURATION NODES:
+
+The name of each subnode is not important; all subnodes should be enumerated
+and processed purely based on their content.
+
+Each subnode only affects those parameters that are explicitly listed. In
+other words, a subnode that lists a mux function but no pin configuration
+parameters implies no information about any pin configuration parameters.
+Similarly, a pin subnode that describes a pullup parameter implies no
+information about e.g. the mux function.
+
+
+The following generic properties as defined in pinctrl-bindings.txt are valid
+to specify in a pin configuration subnode:
+
+- pins:
+ Usage: required
+ Value type: <string-array>
+ Definition: List of gpio pins affected by the properties specified in
+ this subnode. Valid pins are:
+ gpio0-gpio151,
+ sdc1_clk,
+ sdc1_cmd,
+ sdc1_data
+ sdc3_clk,
+ sdc3_cmd,
+ sdc3_data
+
+- function:
+ Usage: required
+ Value type: <string>
+ Definition: Specify the alternative function to be configured for the
+ specified pins. Functions are only valid for gpio pins.
+ Valid values are:
+ audio_pcm, bt, cam_mclk0, cam_mclk1, cam_mclk2,
+ codec_mic_i2s, codec_spkr_i2s, ext_gps, fm, gps_blanking,
+ gps_pps_in, gps_pps_out, gp_clk_0a, gp_clk_0b, gp_clk_1a,
+ gp_clk_1b, gp_clk_2a, gp_clk_2b, gp_mn, gp_pdm_0a,
+ gp_pdm_0b, gp_pdm_1a, gp_pdm_1b, gp_pdm_2a, gp_pdm_2b, gpio,
+ gsbi1, gsbi1_spi_cs1_n, gsbi1_spi_cs2a_n, gsbi1_spi_cs2b_n,
+ gsbi1_spi_cs3_n, gsbi2, gsbi2_spi_cs1_n, gsbi2_spi_cs2_n,
+ gsbi2_spi_cs3_n, gsbi3, gsbi4, gsbi4_3d_cam_i2c_l,
+ gsbi4_3d_cam_i2c_r, gsbi5, gsbi5_3d_cam_i2c_l,
+ gsbi5_3d_cam_i2c_r, gsbi6, gsbi7, gsbi8, gsbi9, gsbi10,
+ gsbi11, gsbi11_spi_cs1a_n, gsbi11_spi_cs1b_n,
+ gsbi11_spi_cs2a_n, gsbi11_spi_cs2b_n, gsbi11_spi_cs3_n,
+ gsbi12, hdmi_cec, hdmi_ddc_clock, hdmi_ddc_data,
+ hdmi_hot_plug_detect, hsic, mdp_vsync, mi2s, mic_i2s,
+ pmb_clk, pmb_ext_ctrl, ps_hold, rpm_wdog, sdc2, sdc4, sdc5,
+ slimbus1, slimbus2, spkr_i2s, ssbi1, ssbi2, ssbi_ext_gps,
+ ssbi_pmic2, ssbi_qpa1, ssbi_ts, tsif1, tsif2, ts_eoc,
+ usb_fs1, usb_fs1_oe, usb_fs1_oe_n, usb_fs2, usb_fs2_oe,
+ usb_fs2_oe_n, vfe_camif_timer1_a, vfe_camif_timer1_b,
+ vfe_camif_timer2, vfe_camif_timer3_a, vfe_camif_timer3_b,
+ vfe_camif_timer4_a, vfe_camif_timer4_b, vfe_camif_timer4_c,
+ vfe_camif_timer5_a, vfe_camif_timer5_b, vfe_camif_timer6_a,
+ vfe_camif_timer6_b, vfe_camif_timer6_c, vfe_camif_timer7_a,
+ vfe_camif_timer7_b, vfe_camif_timer7_c, wlan
+
+- bias-disable:
+ Usage: optional
+ Value type: <none>
+ Definition: The specified pins should be configued as no pull.
+
+- bias-pull-down:
+ Usage: optional
+ Value type: <none>
+ Definition: The specified pins should be configued as pull down.
+
+- bias-pull-up:
+ Usage: optional
+ Value type: <none>
+ Definition: The specified pins should be configued as pull up.
+
+- output-high:
+ Usage: optional
+ Value type: <none>
+ Definition: The specified pins are configured in output mode, driven
+ high.
+ Not valid for sdc pins.
+
+- output-low:
+ Usage: optional
+ Value type: <none>
+ Definition: The specified pins are configured in output mode, driven
+ low.
+ Not valid for sdc pins.
+
+- drive-strength:
+ Usage: optional
+ Value type: <u32>
+ Definition: Selects the drive strength for the specified pins, in mA.
+ Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16
+
+Example:
+
+ msmgpio: pinctrl@800000 {
+ compatible = "qcom,msm8960-pinctrl";
+ reg = <0x800000 0x4000>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <0 16 0x4>;
+
+ gsbi8_uart: gsbi8-uart {
+ mux {
+ pins = "gpio34", "gpio35";
+ function = "gsbi8";
+ };
+
+ tx {
+ pins = "gpio34";
+ drive-strength = <4>;
+ bias-disable;
+ };
+
+ rx {
+ pins = "gpio35";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+ };
diff --git a/dts/Bindings/pinctrl/qcom,msm8974-pinctrl.txt b/dts/Bindings/pinctrl/qcom,msm8974-pinctrl.txt
index 73262b575d..d2ea80dc43 100644
--- a/dts/Bindings/pinctrl/qcom,msm8974-pinctrl.txt
+++ b/dts/Bindings/pinctrl/qcom,msm8974-pinctrl.txt
@@ -70,7 +70,7 @@ Valid values for function are:
cam_mckl0, cam_mclk1, cam_mclk2, cam_mclk3, mdp_vsync, hdmi_cec, hdmi_ddc,
hdmi_hpd, edp_hpd, gp_pdm0, gp_pdm1, gp_pdm2, gp_pdm3, gp0_clk, gp1_clk,
gp_mn, tsif1, tsif2, hsic, grfc, audio_ref_clk, qua_mi2s, pri_mi2s, spkr_mi2s,
- ter_mi2s, sec_mi2s, bt, fm, wlan, slimbus
+ ter_mi2s, sec_mi2s, bt, fm, wlan, slimbus, gpio
(Note that this is not yet the complete list of functions)
diff --git a/dts/Bindings/pinctrl/renesas,pfc-pinctrl.txt b/dts/Bindings/pinctrl/renesas,pfc-pinctrl.txt
index 35d2e1f186..daef6fad6a 100644
--- a/dts/Bindings/pinctrl/renesas,pfc-pinctrl.txt
+++ b/dts/Bindings/pinctrl/renesas,pfc-pinctrl.txt
@@ -15,6 +15,7 @@ Required Properties:
- "renesas,pfc-r8a7778": for R8A7778 (R-Mobile M1) compatible pin-controller.
- "renesas,pfc-r8a7779": for R8A7779 (R-Car H1) compatible pin-controller.
- "renesas,pfc-r8a7790": for R8A7790 (R-Car H2) compatible pin-controller.
+ - "renesas,pfc-r8a7791": for R8A7791 (R-Car M2) compatible pin-controller.
- "renesas,pfc-sh7372": for SH7372 (SH-Mobile AP4) compatible pin-controller.
- "renesas,pfc-sh73a0": for SH73A0 (SH-Mobile AG5) compatible pin-controller.
diff --git a/dts/Bindings/pinctrl/rockchip,pinctrl.txt b/dts/Bindings/pinctrl/rockchip,pinctrl.txt
index cefef741a4..4658b69d4f 100644
--- a/dts/Bindings/pinctrl/rockchip,pinctrl.txt
+++ b/dts/Bindings/pinctrl/rockchip,pinctrl.txt
@@ -21,6 +21,7 @@ defined as gpio sub-nodes of the pinmux controller.
Required properties for iomux controller:
- compatible: one of "rockchip,rk2928-pinctrl", "rockchip,rk3066a-pinctrl"
"rockchip,rk3066b-pinctrl", "rockchip,rk3188-pinctrl"
+ "rockchip,rk3288-pinctrl"
- rockchip,grf: phandle referencing a syscon providing the
"general register files"
@@ -36,7 +37,7 @@ Deprecated properties for iomux controller:
Use rockchip,grf and rockchip,pmu described above instead.
Required properties for gpio sub nodes:
- - compatible: "rockchip,gpio-bank", "rockchip,rk3188-gpio-bank0"
+ - compatible: "rockchip,gpio-bank"
- reg: register of the gpio bank (different than the iomux registerset)
- interrupts: base interrupt of the gpio bank in the interrupt controller
- clocks: clock that drives this bank
@@ -50,6 +51,7 @@ Required properties for gpio sub nodes:
bindings/interrupt-controller/interrupts.txt
Deprecated properties for gpio sub nodes:
+ - compatible: "rockchip,rk3188-gpio-bank0"
- reg: second element: separate pull register for rk3188 bank0, use
rockchip,pmu described above instead
diff --git a/dts/Bindings/pinctrl/samsung-pinctrl.txt b/dts/Bindings/pinctrl/samsung-pinctrl.txt
index 2b32783ba8..e82aaf4925 100644
--- a/dts/Bindings/pinctrl/samsung-pinctrl.txt
+++ b/dts/Bindings/pinctrl/samsung-pinctrl.txt
@@ -44,7 +44,11 @@ Required Properties:
- Pin mux/config groups as child nodes: The pin mux (selecting pin function
mode) and pin config (pull up/down, driver strength) settings are represented
as child nodes of the pin-controller node. There should be atleast one
- child node and there is no limit on the count of these child nodes.
+ child node and there is no limit on the count of these child nodes. It is
+ also possible for a child node to consist of several further child nodes
+ to allow grouping multiple pinctrl groups into one. The format of second
+ level child nodes is exactly the same as for first level ones and is
+ described below.
The child node should contain a list of pin(s) on which a particular pin
function selection or pin configuration (or both) have to applied. This
@@ -71,6 +75,7 @@ Required Properties:
"samsung,pins" property of the child node. The following pin configuration
properties are supported.
+ - samsung,pin-val: Initial value of pin output buffer.
- samsung,pin-pud: Pull up/down configuration.
- samsung,pin-drv: Drive strength configuration.
- samsung,pin-pud-pdn: Pull up/down configuration in power down mode.
@@ -249,6 +254,23 @@ Example 1: A pin-controller node with pin groups.
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
+
+ sd4_bus8: sd4-bus-width8 {
+ part-1 {
+ samsung,pins = "gpk0-3", "gpk0-4",
+ "gpk0-5", "gpk0-6";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+ part-2 {
+ samsung,pins = "gpk1-3", "gpk1-4",
+ "gpk1-5", "gpk1-6";
+ samsung,pin-function = <4>;
+ samsung,pin-pud = <4>;
+ samsung,pin-drv = <3>;
+ };
+ };
};
Example 2: A pin-controller node with external wakeup interrupt controller node.
diff --git a/dts/Bindings/power/rx51-battery.txt b/dts/Bindings/power/rx51-battery.txt
new file mode 100644
index 0000000000..90438453db
--- /dev/null
+++ b/dts/Bindings/power/rx51-battery.txt
@@ -0,0 +1,25 @@
+Binding for Nokia N900 battery
+
+The Nokia N900 battery status can be read via the TWL4030's A/D converter.
+
+Required properties:
+- compatible: Should contain one of the following:
+ * "nokia,n900-battery"
+- io-channels: Should contain IIO channel specifiers
+ for each element in io-channel-names.
+- io-channel-names: Should contain the following values:
+ * "temp" - The ADC channel for temperature reading
+ * "bsi" - The ADC channel for battery size identification
+ * "vbat" - The ADC channel to measure the battery voltage
+
+Example from Nokia N900:
+
+battery: n900-battery {
+ compatible = "nokia,n900-battery";
+ io-channels = <&twl4030_madc 0>,
+ <&twl4030_madc 4>,
+ <&twl4030_madc 12>;
+ io-channel-names = "temp",
+ "bsi",
+ "vbat";
+};
diff --git a/dts/Bindings/powerpc/fsl/board.txt b/dts/Bindings/powerpc/fsl/board.txt
index 700dec4774..cff38bdbc0 100644
--- a/dts/Bindings/powerpc/fsl/board.txt
+++ b/dts/Bindings/powerpc/fsl/board.txt
@@ -84,3 +84,19 @@ Example:
compatible = "fsl,bsc9132qds-fpga", "fsl,fpga-qixis-i2c";
reg = <0x66>;
};
+
+* Freescale on-board CPLD
+
+Some Freescale boards like T1040RDB have an on board CPLD connected.
+
+Required properties:
+- compatible: Should be a board-specific string like "fsl,<board>-cpld"
+ Example:
+ "fsl,t1040rdb-cpld", "fsl,t1042rdb-cpld", "fsl,t1042rdb_pi-cpld"
+- reg: should describe CPLD registers
+
+Example:
+ cpld@3,0 {
+ compatible = "fsl,t1040rdb-cpld";
+ reg = <3 0 0x300>;
+ };
diff --git a/dts/Bindings/pwm/pwm-rockchip.txt b/dts/Bindings/pwm/pwm-rockchip.txt
new file mode 100644
index 0000000000..d47d15a6a2
--- /dev/null
+++ b/dts/Bindings/pwm/pwm-rockchip.txt
@@ -0,0 +1,20 @@
+Rockchip PWM controller
+
+Required properties:
+ - compatible: should be "rockchip,<name>-pwm"
+ "rockchip,rk2928-pwm": found on RK29XX,RK3066 and RK3188 SoCs
+ "rockchip,rk3288-pwm": found on RK3288 SoC
+ "rockchip,vop-pwm": found integrated in VOP on RK3288 SoC
+ - reg: physical base address and length of the controller's registers
+ - clocks: phandle and clock specifier of the PWM reference clock
+ - #pwm-cells: should be 2. See pwm.txt in this directory for a
+ description of the cell format.
+
+Example:
+
+ pwm0: pwm@20030000 {
+ compatible = "rockchip,rk2928-pwm";
+ reg = <0x20030000 0x10>;
+ clocks = <&cru PCLK_PWM01>;
+ #pwm-cells = <2>;
+ };
diff --git a/dts/Bindings/pwm/pwm-st.txt b/dts/Bindings/pwm/pwm-st.txt
new file mode 100644
index 0000000000..84d2fb807d
--- /dev/null
+++ b/dts/Bindings/pwm/pwm-st.txt
@@ -0,0 +1,41 @@
+STMicroelectronics PWM driver bindings
+--------------------------------------
+
+Required parameters:
+- compatible : "st,pwm"
+- #pwm-cells : Number of cells used to specify a PWM. First cell
+ specifies the per-chip index of the PWM to use and the
+ second cell is the period in nanoseconds - fixed to 2
+ for STiH41x.
+- reg : Physical base address and length of the controller's
+ registers.
+- pinctrl-names: Set to "default".
+- pinctrl-0: List of phandles pointing to pin configuration nodes
+ for PWM module.
+ For Pinctrl properties, please refer to [1].
+- clock-names: Set to "pwm".
+- clocks: phandle of the clock used by the PWM module.
+ For Clk properties, please refer to [2].
+
+Optional properties:
+- st,pwm-num-chan: Number of available channels. If not passed, the driver
+ will consider single channel by default.
+
+[1] Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
+[2] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Example:
+
+pwm1: pwm@fe510000 {
+ compatible = "st,pwm";
+ reg = <0xfe510000 0x68>;
+ #pwm-cells = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm1_chan0_default
+ &pinctrl_pwm1_chan1_default
+ &pinctrl_pwm1_chan2_default
+ &pinctrl_pwm1_chan3_default>;
+ clocks = <&clk_sysin>;
+ clock-names = "pwm";
+ st,pwm-num-chan = <4>;
+};
diff --git a/dts/Bindings/regulator/act8865-regulator.txt b/dts/Bindings/regulator/act8865-regulator.txt
index bef1fbb647..865614b34d 100644
--- a/dts/Bindings/regulator/act8865-regulator.txt
+++ b/dts/Bindings/regulator/act8865-regulator.txt
@@ -1,13 +1,16 @@
-ACT8865 regulator
+ACT88xx regulators
-------------------
Required properties:
-- compatible: "active-semi,act8865"
+- compatible: "active-semi,act8846" or "active-semi,act8865"
- reg: I2C slave address
Any standard regulator properties can be used to configure the single regulator.
The valid names for regulators are:
+ - for act8846:
+ REG1, REG2, REG3, REG4, REG5, REG6, REG7, REG8, REG9, REG10, REG11, REG12
+ - for act8865:
DCDC_REG1, DCDC_REG2, DCDC_REG3, LDO_REG1, LDO_REG2, LDO_REG3, LDO_REG4.
Example:
diff --git a/dts/Bindings/regulator/palmas-pmic.txt b/dts/Bindings/regulator/palmas-pmic.txt
index 42e6b6bc48..725393c8a7 100644
--- a/dts/Bindings/regulator/palmas-pmic.txt
+++ b/dts/Bindings/regulator/palmas-pmic.txt
@@ -7,6 +7,7 @@ Required properties:
ti,twl6037-pmic
ti,tps65913-pmic
ti,tps65914-pmic
+ ti,tps65917-pmic
and also the generic series names
ti,palmas-pmic
- interrupt-parent : The parent interrupt controller which is palmas.
diff --git a/dts/Bindings/regulator/s5m8767-regulator.txt b/dts/Bindings/regulator/s5m8767-regulator.txt
index d290988ed9..20191315e4 100644
--- a/dts/Bindings/regulator/s5m8767-regulator.txt
+++ b/dts/Bindings/regulator/s5m8767-regulator.txt
@@ -86,7 +86,7 @@ as per the datasheet of s5m8767.
- LDOn
- valid values for n are 1 to 28
- - Example: LDO1, LD02, LDO28
+ - Example: LDO1, LDO2, LDO28
- BUCKn
- valid values for n are 1 to 9.
- Example: BUCK1, BUCK2, BUCK9
diff --git a/dts/Bindings/regulator/tps65218.txt b/dts/Bindings/regulator/tps65218.txt
new file mode 100644
index 0000000000..fccc1d24af
--- /dev/null
+++ b/dts/Bindings/regulator/tps65218.txt
@@ -0,0 +1,23 @@
+TPS65218 family of regulators
+
+Required properties:
+For tps65218 regulators/LDOs
+- compatible:
+ - "ti,tps65218-dcdc1" for DCDC1
+ - "ti,tps65218-dcdc2" for DCDC2
+ - "ti,tps65218-dcdc3" for DCDC3
+ - "ti,tps65218-dcdc4" for DCDC4
+ - "ti,tps65218-dcdc5" for DCDC5
+ - "ti,tps65218-dcdc6" for DCDC6
+ - "ti,tps65218-ldo1" for LDO1
+
+Optional properties:
+- Any optional property defined in bindings/regulator/regulator.txt
+
+Example:
+
+ xyz: regulator@0 {
+ compatible = "ti,tps65218-dcdc1";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3000000>;
+ };
diff --git a/dts/Bindings/serial/cdns,uart.txt b/dts/Bindings/serial/cdns,uart.txt
new file mode 100644
index 0000000000..a3eb154c32
--- /dev/null
+++ b/dts/Bindings/serial/cdns,uart.txt
@@ -0,0 +1,20 @@
+Binding for Cadence UART Controller
+
+Required properties:
+- compatible : should be "cdns,uart-r1p8", or "xlnx,xuartps"
+- reg: Should contain UART controller registers location and length.
+- interrupts: Should contain UART controller interrupts.
+- clocks: Must contain phandles to the UART clocks
+ See ../clocks/clock-bindings.txt for details.
+- clock-names: Tuple to identify input clocks, must contain "uart_clk" and "pclk"
+ See ../clocks/clock-bindings.txt for details.
+
+
+Example:
+ uart@e0000000 {
+ compatible = "cdns,uart-r1p8";
+ clocks = <&clkc 23>, <&clkc 40>;
+ clock-names = "uart_clk", "pclk";
+ reg = <0xE0000000 0x1000>;
+ interrupts = <0 27 4>;
+ };
diff --git a/dts/Bindings/serial/efm32-uart.txt b/dts/Bindings/serial/efm32-uart.txt
index 3ca01336b8..8adbab268c 100644
--- a/dts/Bindings/serial/efm32-uart.txt
+++ b/dts/Bindings/serial/efm32-uart.txt
@@ -6,7 +6,7 @@ Required properties:
- interrupts : Should contain uart interrupt
Optional properties:
-- efm32,location : Decides the location of the USART I/O pins.
+- energymicro,location : Decides the location of the USART I/O pins.
Allowed range : [0 .. 5]
Default: 0
@@ -16,5 +16,5 @@ uart@0x4000c400 {
compatible = "energymicro,efm32-uart";
reg = <0x4000c400 0x400>;
interrupts = <15>;
- efm32,location = <0>;
+ energymicro,location = <0>;
};
diff --git a/dts/Bindings/serial/fsl-lpuart.txt b/dts/Bindings/serial/fsl-lpuart.txt
index a1d1205d81..c95005efbc 100644
--- a/dts/Bindings/serial/fsl-lpuart.txt
+++ b/dts/Bindings/serial/fsl-lpuart.txt
@@ -1,7 +1,11 @@
* Freescale low power universal asynchronous receiver/transmitter (lpuart)
Required properties:
-- compatible : Should be "fsl,<soc>-lpuart"
+- compatible :
+ - "fsl,vf610-lpuart" for lpuart compatible with the one integrated
+ on Vybrid vf610 SoC with 8-bit register organization
+ - "fsl,ls1021a-lpuart" for lpuart compatible with the one integrated
+ on LS1021A SoC with 32-bit big-endian register organization
- reg : Address and length of the register set for the device
- interrupts : Should contain uart interrupt
- clocks : phandle + clock specifier pairs, one for each entry in clock-names
diff --git a/dts/Bindings/serial/samsung_uart.txt b/dts/Bindings/serial/samsung_uart.txt
index 2c8a17cf5c..e85f37ec33 100644
--- a/dts/Bindings/serial/samsung_uart.txt
+++ b/dts/Bindings/serial/samsung_uart.txt
@@ -1,14 +1,58 @@
* Samsung's UART Controller
-The Samsung's UART controller is used for interfacing SoC with serial communicaion
-devices.
+The Samsung's UART controller is used for interfacing SoC with serial
+communicaion devices.
Required properties:
-- compatible: should be
- - "samsung,exynos4210-uart", for UART's compatible with Exynos4210 uart ports.
+- compatible: should be one of following:
+ - "samsung,exynos4210-uart" - Exynos4210 SoC,
+ - "samsung,s3c2410-uart" - compatible with ports present on S3C2410 SoC,
+ - "samsung,s3c2412-uart" - compatible with ports present on S3C2412 SoC,
+ - "samsung,s3c2440-uart" - compatible with ports present on S3C2440 SoC,
+ - "samsung,s3c6400-uart" - compatible with ports present on S3C6400 SoC,
+ - "samsung,s5pv210-uart" - compatible with ports present on S5PV210 SoC.
- reg: base physical address of the controller and length of memory mapped
region.
-- interrupts: interrupt number to the cpu. The interrupt specifier format depends
- on the interrupt controller parent.
+- interrupts: a single interrupt signal to SoC interrupt controller,
+ according to interrupt bindings documentation [1].
+
+- clock-names: input names of clocks used by the controller:
+ - "uart" - controller bus clock,
+ - "clk_uart_baudN" - Nth baud base clock input (N = 0, 1, ...),
+ according to SoC User's Manual (only N = 0 is allowedfor SoCs without
+ internal baud clock mux).
+- clocks: phandles and specifiers for all clocks specified in "clock-names"
+ property, in the same order, according to clock bindings documentation [2].
+
+[1] Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
+[2] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Optional properties:
+- samsung,uart-fifosize: The fifo size supported by the UART channel
+
+Note: Each Samsung UART should have an alias correctly numbered in the
+"aliases" node, according to serialN format, where N is the port number
+(non-negative decimal integer) as specified by User's Manual of respective
+SoC.
+
+Example:
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ };
+
+Example:
+ uart1: serial@7f005400 {
+ compatible = "samsung,s3c6400-uart";
+ reg = <0x7f005400 0x100>;
+ interrupt-parent = <&vic1>;
+ interrupts = <6>;
+ clock-names = "uart", "clk_uart_baud2",
+ "clk_uart_baud3";
+ clocks = <&clocks PCLK_UART1>, <&clocks PCLK_UART1>,
+ <&clocks SCLK_UART>;
+ samsung,uart-fifosize = <16>;
+ };
diff --git a/dts/Bindings/serial/snps-dw-apb-uart.txt b/dts/Bindings/serial/snps-dw-apb-uart.txt
index f13f1c5be9..7f76214f72 100644
--- a/dts/Bindings/serial/snps-dw-apb-uart.txt
+++ b/dts/Bindings/serial/snps-dw-apb-uart.txt
@@ -4,9 +4,18 @@ Required properties:
- compatible : "snps,dw-apb-uart"
- reg : offset and length of the register set for the device.
- interrupts : should contain uart interrupt.
+
+Clock handling:
+The clock rate of the input clock needs to be supplied by one of
- clock-frequency : the input clock frequency for the UART.
+- clocks : phandle to the input clock
+
+The supplying peripheral clock can also be handled, needing a second property
+- clock-names: tuple listing input clock names.
+ Required elements: "baudclk", "apb_pclk"
Optional properties:
+- resets : phandle to the parent reset controller.
- reg-shift : quantity to shift the register offsets by. If this property is
not present then the register offsets are not shifted.
- reg-io-width : the size (in bytes) of the IO accesses that should be
@@ -23,3 +32,26 @@ Example:
reg-shift = <2>;
reg-io-width = <4>;
};
+
+Example with one clock:
+
+ uart@80230000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x80230000 0x100>;
+ clocks = <&baudclk>;
+ interrupts = <10>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ };
+
+Example with two clocks:
+
+ uart@80230000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x80230000 0x100>;
+ clocks = <&baudclk>, <&apb_pclk>;
+ clock-names = "baudclk", "apb_pclk";
+ interrupts = <10>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ };
diff --git a/dts/Bindings/sound/ak5386.txt b/dts/Bindings/sound/ak5386.txt
index dc3914fe6c..ec3df3abba 100644
--- a/dts/Bindings/sound/ak5386.txt
+++ b/dts/Bindings/sound/ak5386.txt
@@ -10,10 +10,14 @@ Optional properties:
- reset-gpio : a GPIO spec for the reset/power down pin.
If specified, it will be deasserted at probe time.
+ - va-supply : a regulator spec, providing 5.0V
+ - vd-supply : a regulator spec, providing 3.3V
Example:
spdif: ak5386@0 {
compatible = "asahi-kasei,ak5386";
reset-gpio = <&gpio0 23>;
+ va-supply = <&vdd_5v0_reg>;
+ vd-supply = <&vdd_3v3_reg>;
};
diff --git a/dts/Bindings/sound/cs4265.txt b/dts/Bindings/sound/cs4265.txt
new file mode 100644
index 0000000000..380fff8e4e
--- /dev/null
+++ b/dts/Bindings/sound/cs4265.txt
@@ -0,0 +1,29 @@
+CS4265 audio CODEC
+
+This device supports I2C only.
+
+Required properties:
+
+ - compatible : "cirrus,cs4265"
+
+ - reg : the I2C address of the device for I2C. The I2C address depends on
+ the state of the AD0 pin. If AD0 is high, the i2c address is 0x4f.
+ If it is low, the i2c address is 0x4e.
+
+Optional properties:
+
+ - reset-gpios : a GPIO spec for the reset pin. If specified, it will be
+ deasserted before communication to the codec starts.
+
+Examples:
+
+codec_ad0_high: cs4265@4f { /* AD0 Pin is high */
+ compatible = "cirrus,cs4265";
+ reg = <0x4f>;
+};
+
+
+codec_ad0_low: cs4265@4e { /* AD0 Pin is low */
+ compatible = "cirrus,cs4265";
+ reg = <0x4e>;
+};
diff --git a/dts/Bindings/sound/fsl,asrc.txt b/dts/Bindings/sound/fsl,asrc.txt
new file mode 100644
index 0000000000..b93362a570
--- /dev/null
+++ b/dts/Bindings/sound/fsl,asrc.txt
@@ -0,0 +1,60 @@
+Freescale Asynchronous Sample Rate Converter (ASRC) Controller
+
+The Asynchronous Sample Rate Converter (ASRC) converts the sampling rate of a
+signal associated with an input clock into a signal associated with a different
+output clock. The driver currently works as a Front End of DPCM with other Back
+Ends Audio controller such as ESAI, SSI and SAI. It has three pairs to support
+three substreams within totally 10 channels.
+
+Required properties:
+
+ - compatible : Contains "fsl,imx35-asrc" or "fsl,imx53-asrc".
+
+ - reg : Offset and length of the register set for the device.
+
+ - interrupts : Contains the spdif interrupt.
+
+ - dmas : Generic dma devicetree binding as described in
+ Documentation/devicetree/bindings/dma/dma.txt.
+
+ - dma-names : Contains "rxa", "rxb", "rxc", "txa", "txb" and "txc".
+
+ - clocks : Contains an entry for each entry in clock-names.
+
+ - clock-names : Contains the following entries
+ "mem" Peripheral access clock to access registers.
+ "ipg" Peripheral clock to driver module.
+ "asrck_<0-f>" Clock sources for input and output clock.
+
+ - big-endian : If this property is absent, the little endian mode
+ will be in use as default. Otherwise, the big endian
+ mode will be in use for all the device registers.
+
+ - fsl,asrc-rate : Defines a mutual sample rate used by DPCM Back Ends.
+
+ - fsl,asrc-width : Defines a mutual sample width used by DPCM Back Ends.
+
+Example:
+
+asrc: asrc@02034000 {
+ compatible = "fsl,imx53-asrc";
+ reg = <0x02034000 0x4000>;
+ interrupts = <0 50 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks 107>, <&clks 107>, <&clks 0>,
+ <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
+ <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
+ <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
+ <&clks 107>, <&clks 0>, <&clks 0>;
+ clock-names = "mem", "ipg", "asrck0",
+ "asrck_1", "asrck_2", "asrck_3", "asrck_4",
+ "asrck_5", "asrck_6", "asrck_7", "asrck_8",
+ "asrck_9", "asrck_a", "asrck_b", "asrck_c",
+ "asrck_d", "asrck_e", "asrck_f";
+ dmas = <&sdma 17 23 1>, <&sdma 18 23 1>, <&sdma 19 23 1>,
+ <&sdma 20 23 1>, <&sdma 21 23 1>, <&sdma 22 23 1>;
+ dma-names = "rxa", "rxb", "rxc",
+ "txa", "txb", "txc";
+ fsl,asrc-rate = <48000>;
+ fsl,asrc-width = <16>;
+ status = "okay";
+};
diff --git a/dts/Bindings/sound/max98090.txt b/dts/Bindings/sound/max98090.txt
index a5e63fa47d..c454e67f54 100644
--- a/dts/Bindings/sound/max98090.txt
+++ b/dts/Bindings/sound/max98090.txt
@@ -4,7 +4,7 @@ This device supports I2C only.
Required properties:
-- compatible : "maxim,max98090".
+- compatible : "maxim,max98090" or "maxim,max98091".
- reg : The I2C address of the device.
diff --git a/dts/Bindings/sound/renesas,rsnd.txt b/dts/Bindings/sound/renesas,rsnd.txt
index 8346cab046..aa697abf33 100644
--- a/dts/Bindings/sound/renesas,rsnd.txt
+++ b/dts/Bindings/sound/renesas,rsnd.txt
@@ -13,6 +13,9 @@ Required properties:
- rcar_sound,src : Should contain SRC feature.
The number of SRC subnode should be same as HW.
see below for detail.
+- rcar_sound,dvc : Should contain DVC feature.
+ The number of DVC subnode should be same as HW.
+ see below for detail.
- rcar_sound,dai : DAI contents.
The number of DAI subnode should be same as HW.
see below for detail.
@@ -21,6 +24,7 @@ SSI subnode properties:
- interrupts : Should contain SSI interrupt for PIO transfer
- shared-pin : if shared clock pin
- pio-transfer : use PIO transfer mode
+- no-busif : BUSIF is not ussed when [mem -> SSI] via DMA case
SRC subnode properties:
no properties at this point
@@ -39,6 +43,11 @@ rcar_sound: rcar_sound@0xffd90000 {
<0 0xec540000 0 0x1000>, /* SSIU */
<0 0xec541000 0 0x1280>; /* SSI */
+ rcar_sound,dvc {
+ dvc0: dvc@0 { };
+ dvc1: dvc@1 { };
+ };
+
rcar_sound,src {
src0: src@0 { };
src1: src@1 { };
diff --git a/dts/Bindings/sound/rockchip-i2s.txt b/dts/Bindings/sound/rockchip-i2s.txt
new file mode 100644
index 0000000000..6c55fcfe5e
--- /dev/null
+++ b/dts/Bindings/sound/rockchip-i2s.txt
@@ -0,0 +1,37 @@
+* Rockchip I2S controller
+
+The I2S bus (Inter-IC sound bus) is a serial link for digital
+audio data transfer between devices in the system.
+
+Required properties:
+
+- compatible: should be one of the followings
+ - "rockchip,rk3066-i2s": for rk3066
+ - "rockchip,rk3188-i2s", "rockchip,rk3066-i2s": for rk3188
+ - "rockchip,rk3288-i2s", "rockchip,rk3066-i2s": for rk3288
+- reg: physical base address of the controller and length of memory mapped
+ region.
+- interrupts: should contain the I2S interrupt.
+- #address-cells: should be 1.
+- #size-cells: should be 0.
+- dmas: DMA specifiers for tx and rx dma. See the DMA client binding,
+ Documentation/devicetree/bindings/dma/dma.txt
+- dma-names: should include "tx" and "rx".
+- clocks: a list of phandle + clock-specifer pairs, one for each entry in clock-names.
+- clock-names: should contain followings:
+ - "i2s_hclk": clock for I2S BUS
+ - "i2s_clk" : clock for I2S controller
+
+Example for rk3288 I2S controller:
+
+i2s@ff890000 {
+ compatible = "rockchip,rk3288-i2s", "rockchip,rk3066-i2s";
+ reg = <0xff890000 0x10000>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ dmas = <&pdma1 0>, <&pdma1 1>;
+ dma-names = "rx", "tx";
+ clock-names = "i2s_hclk", "i2s_clk";
+ clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>;
+};
diff --git a/dts/Bindings/sound/samsung,odroidx2-max98090.txt b/dts/Bindings/sound/samsung,odroidx2-max98090.txt
new file mode 100644
index 0000000000..9148f72319
--- /dev/null
+++ b/dts/Bindings/sound/samsung,odroidx2-max98090.txt
@@ -0,0 +1,35 @@
+Samsung Exynos Odroid X2/U3 audio complex with MAX98090 codec
+
+Required properties:
+ - compatible : "samsung,odroidx2-audio" - for Odroid X2 board,
+ "samsung,odroidu3-audio" - for Odroid U3 board
+ - samsung,model : the user-visible name of this sound complex
+ - samsung,i2s-controller : the phandle of the I2S controller
+ - samsung,audio-codec : the phandle of the MAX98090 audio codec
+ - samsung,audio-routing : a list of the connections between audio
+ components; each entry is a pair of strings, the first being the
+ connection's sink, the second being the connection's source;
+ valid names for sources and sinks are the MAX98090's pins (as
+ documented in its binding), and the jacks on the board
+ For Odroid X2:
+ * Headphone Jack
+ * Mic Jack
+ * DMIC
+
+ For Odroid U3:
+ * Headphone Jack
+ * Speakers
+
+Example:
+
+sound {
+ compatible = "samsung,odroidu3-audio";
+ samsung,i2s-controller = <&i2s0>;
+ samsung,audio-codec = <&max98090>;
+ samsung,model = "Odroid-X2";
+ samsung,audio-routing =
+ "Headphone Jack", "HPL",
+ "Headphone Jack", "HPR",
+ "IN1", "Mic Jack",
+ "Mic Jack", "MICBIAS";
+};
diff --git a/dts/Bindings/sound/sirf-usp.txt b/dts/Bindings/sound/sirf-usp.txt
new file mode 100644
index 0000000000..02f85b32d3
--- /dev/null
+++ b/dts/Bindings/sound/sirf-usp.txt
@@ -0,0 +1,27 @@
+* SiRF SoC USP module
+
+Required properties:
+- compatible: "sirf,prima2-usp-pcm"
+- reg: Base address and size entries:
+- dmas: List of DMA controller phandle and DMA request line ordered pairs.
+- dma-names: Identifier string for each DMA request line in the dmas property.
+ These strings correspond 1:1 with the ordered pairs in dmas.
+
+ One of the DMA channels will be responsible for transmission (should be
+ named "tx") and one for reception (should be named "rx").
+
+- clocks: USP controller clock source
+- pinctrl-names: Must contain a "default" entry.
+- pinctrl-NNN: One property must exist for each entry in pinctrl-names.
+
+Example:
+usp0: usp@b0080000 {
+ compatible = "sirf,prima2-usp-pcm";
+ reg = <0xb0080000 0x10000>;
+ clocks = <&clks 28>;
+ dmas = <&dmac1 1>, <&dmac1 2>;
+ dma-names = "rx", "tx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&usp0_only_utfs_pins_a>;
+};
+
diff --git a/dts/Bindings/sound/snow.txt b/dts/Bindings/sound/snow.txt
index 678b191c37..6df74f1568 100644
--- a/dts/Bindings/sound/snow.txt
+++ b/dts/Bindings/sound/snow.txt
@@ -3,15 +3,20 @@ Audio Binding for Snow boards
Required properties:
- compatible : Can be one of the following,
"google,snow-audio-max98090" or
+ "google,snow-audio-max98091" or
"google,snow-audio-max98095"
- samsung,i2s-controller: The phandle of the Samsung I2S controller
- samsung,audio-codec: The phandle of the audio codec
+Optional:
+- samsung,model: The name of the sound-card
+
Example:
sound {
compatible = "google,snow-audio-max98095";
+ samsung,model = "Snow-I2S-MAX98095";
samsung,i2s-controller = <&i2s0>;
samsung,audio-codec = <&max98095>;
};
diff --git a/dts/Bindings/sound/tas2552.txt b/dts/Bindings/sound/tas2552.txt
new file mode 100644
index 0000000000..55e2a0af56
--- /dev/null
+++ b/dts/Bindings/sound/tas2552.txt
@@ -0,0 +1,26 @@
+Texas Instruments - tas2552 Codec module
+
+The tas2552 serial control bus communicates through I2C protocols
+
+Required properties:
+ - compatible - One of:
+ "ti,tas2552" - TAS2552
+ - reg - I2C slave address
+ - supply-*: Required supply regulators are:
+ "vbat" battery voltage
+ "iovdd" I/O Voltage
+ "avdd" Analog DAC Voltage
+
+Optional properties:
+ - enable-gpio - gpio pin to enable/disable the device
+
+Example:
+
+tas2552: tas2552@41 {
+ compatible = "ti,tas2552";
+ reg = <0x41>;
+ enable-gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>;
+};
+
+For more product information please see the link below:
+http://www.ti.com/product/TAS2552
diff --git a/dts/Bindings/sound/ti,tas5086.txt b/dts/Bindings/sound/ti,tas5086.txt
index d2866a0d6a..234dad296d 100644
--- a/dts/Bindings/sound/ti,tas5086.txt
+++ b/dts/Bindings/sound/ti,tas5086.txt
@@ -31,6 +31,9 @@ Optional properties:
Most systems should not set any of these properties.
+ - avdd-supply: Power supply for AVDD, providing 3.3V
+ - dvdd-supply: Power supply for DVDD, providing 3.3V
+
Examples:
i2c_bus {
@@ -39,5 +42,7 @@ Examples:
reg = <0x1b>;
reset-gpio = <&gpio 23 0>;
ti,charge-period = <156000>;
+ avdd-supply = <&vdd_3v3_reg>;
+ dvdd-supply = <&vdd_3v3_reg>;
};
};
diff --git a/dts/Bindings/sound/wm8904.txt b/dts/Bindings/sound/wm8904.txt
new file mode 100644
index 0000000000..e99f4097c8
--- /dev/null
+++ b/dts/Bindings/sound/wm8904.txt
@@ -0,0 +1,33 @@
+WM8904 audio CODEC
+
+This device supports I2C only.
+
+Required properties:
+ - compatible: "wlf,wm8904"
+ - reg: the I2C address of the device.
+ - clock-names: "mclk"
+ - clocks: reference to
+ <Documentation/devicetree/bindings/clock/clock-bindings.txt>
+
+Pins on the device (for linking into audio routes):
+
+ * IN1L
+ * IN1R
+ * IN2L
+ * IN2R
+ * IN3L
+ * IN3R
+ * HPOUTL
+ * HPOUTR
+ * LINEOUTL
+ * LINEOUTR
+ * MICBIAS
+
+Examples:
+
+codec: wm8904@1a {
+ compatible = "wlf,wm8904";
+ reg = <0x1a>;
+ clocks = <&pck0>;
+ clock-names = "mclk";
+};
diff --git a/dts/Bindings/spi/efm32-spi.txt b/dts/Bindings/spi/efm32-spi.txt
index 130cd17e36..750e29aff9 100644
--- a/dts/Bindings/spi/efm32-spi.txt
+++ b/dts/Bindings/spi/efm32-spi.txt
@@ -10,11 +10,12 @@ Required properties:
- cs-gpios: see spi-bus.txt
Recommended properties :
-- efm32,location: Value to write to the ROUTE register's LOCATION bitfield to
- configure the pinmux for the device, see datasheet for values.
- If "efm32,location" property is not provided, keeping what is
- already configured in the hardware, so its either the reset
- default 0 or whatever the bootloader did.
+- energymicro,location: Value to write to the ROUTE register's LOCATION
+ bitfield to configure the pinmux for the device, see
+ datasheet for values.
+ If this property is not provided, keeping what is
+ already configured in the hardware, so its either the
+ reset default 0 or whatever the bootloader did.
Example:
@@ -26,7 +27,7 @@ spi1: spi@0x4000c400 { /* USART1 */
interrupts = <15 16>;
clocks = <&cmu 20>;
cs-gpios = <&gpio 51 1>; // D3
- efm32,location = <1>;
+ energymicro,location = <1>;
status = "ok";
ks8851@0 {
diff --git a/dts/Bindings/spi/qcom,spi-qup.txt b/dts/Bindings/spi/qcom,spi-qup.txt
index bee6ff204b..e2c88df2cc 100644
--- a/dts/Bindings/spi/qcom,spi-qup.txt
+++ b/dts/Bindings/spi/qcom,spi-qup.txt
@@ -7,7 +7,11 @@ SPI in master mode supports up to 50MHz, up to four chip selects, programmable
data path from 4 bits to 32 bits and numerous protocol variants.
Required properties:
-- compatible: Should contain "qcom,spi-qup-v2.1.1" or "qcom,spi-qup-v2.2.1"
+- compatible: Should contain:
+ "qcom,spi-qup-v1.1.1" for 8660, 8960 and 8064.
+ "qcom,spi-qup-v2.1.1" for 8974 and later
+ "qcom,spi-qup-v2.2.1" for 8974 v2 and later.
+
- reg: Should contain base register location and length
- interrupts: Interrupt number used by this controller
diff --git a/dts/Bindings/spi/snps,dw-apb-ssi.txt b/dts/Bindings/spi/snps,dw-apb-ssi.txt
new file mode 100644
index 0000000000..bd99193e87
--- /dev/null
+++ b/dts/Bindings/spi/snps,dw-apb-ssi.txt
@@ -0,0 +1,28 @@
+Synopsys DesignWare AMBA 2.0 Synchronous Serial Interface.
+
+Required properties:
+- compatible : "snps,dw-apb-ssi"
+- reg : The register base for the controller.
+- interrupts : One interrupt, used by the controller.
+- #address-cells : <1>, as required by generic SPI binding.
+- #size-cells : <0>, also as required by generic SPI binding.
+
+Optional properties:
+- cs-gpios : Specifies the gpio pis to be used for chipselects.
+- num-cs : The number of chipselects. If omitted, this will default to 4.
+
+Child nodes as per the generic SPI binding.
+
+Example:
+
+ spi@fff00000 {
+ compatible = "snps,dw-apb-ssi";
+ reg = <0xfff00000 0x1000>;
+ interrupts = <0 154 4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ num-cs = <2>;
+ cs-gpios = <&gpio0 13 0>,
+ <&gpio0 14 0>;
+ };
+
diff --git a/dts/Bindings/spi/spi-davinci.txt b/dts/Bindings/spi/spi-davinci.txt
index 6d0ac8d0ad..f80887bca0 100644
--- a/dts/Bindings/spi/spi-davinci.txt
+++ b/dts/Bindings/spi/spi-davinci.txt
@@ -8,7 +8,8 @@ Required properties:
- "ti,dm6441-spi" for SPI used similar to that on DM644x SoC family
- "ti,da830-spi" for SPI used similar to that on DA8xx SoC family
- reg: Offset and length of SPI controller register space
-- num-cs: Number of chip selects
+- num-cs: Number of chip selects. This includes internal as well as
+ GPIO chip selects.
- ti,davinci-spi-intr-line: interrupt line used to connect the SPI
IP to the interrupt controller within the SoC. Possible values
are 0 and 1. Manual says one of the two possible interrupt
@@ -17,6 +18,12 @@ Required properties:
- interrupts: interrupt number mapped to CPU.
- clocks: spi clk phandle
+Optional:
+- cs-gpios: gpio chip selects
+ For example to have 3 internal CS and 2 GPIO CS, user could define
+ cs-gpios = <0>, <0>, <0>, <&gpio1 30 0>, <&gpio1 31 0>;
+ where first three are internal CS and last two are GPIO CS.
+
Example of a NOR flash slave device (n25q032) connected to DaVinci
SPI controller device over the SPI bus.
diff --git a/dts/Bindings/spi/spi-rockchip.txt b/dts/Bindings/spi/spi-rockchip.txt
new file mode 100644
index 0000000000..7bab355758
--- /dev/null
+++ b/dts/Bindings/spi/spi-rockchip.txt
@@ -0,0 +1,37 @@
+* Rockchip SPI Controller
+
+The Rockchip SPI controller is used to interface with various devices such as flash
+and display controllers using the SPI communication interface.
+
+Required Properties:
+
+- compatible: should be one of the following.
+ "rockchip,rk3066-spi" for rk3066.
+ "rockchip,rk3188-spi", "rockchip,rk3066-spi" for rk3188.
+ "rockchip,rk3288-spi", "rockchip,rk3066-spi" for rk3288.
+- reg: physical base address of the controller and length of memory mapped
+ region.
+- interrupts: The interrupt number to the cpu. The interrupt specifier format
+ depends on the interrupt controller.
+- clocks: Must contain an entry for each entry in clock-names.
+- clock-names: Shall be "spiclk" for the transfer-clock, and "apb_pclk" for
+ the peripheral clock.
+- dmas: DMA specifiers for tx and rx dma. See the DMA client binding,
+ Documentation/devicetree/bindings/dma/dma.txt
+- dma-names: DMA request names should include "tx" and "rx" if present.
+- #address-cells: should be 1.
+- #size-cells: should be 0.
+
+Example:
+
+ spi0: spi@ff110000 {
+ compatible = "rockchip,rk3066-spi";
+ reg = <0xff110000 0x1000>;
+ dmas = <&pdma1 11>, <&pdma1 12>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>;
+ clock-names = "spiclk", "apb_pclk";
+ };
diff --git a/dts/Bindings/spi/spi-samsung.txt b/dts/Bindings/spi/spi-samsung.txt
index 86aa061f06..1e8a857814 100644
--- a/dts/Bindings/spi/spi-samsung.txt
+++ b/dts/Bindings/spi/spi-samsung.txt
@@ -8,7 +8,6 @@ Required SoC Specific Properties:
- compatible: should be one of the following.
- samsung,s3c2443-spi: for s3c2443, s3c2416 and s3c2450 platforms
- samsung,s3c6410-spi: for s3c6410 platforms
- - samsung,s5p6440-spi: for s5p6440 and s5p6450 platforms
- samsung,s5pv210-spi: for s5pv210 and s5pc110 platforms
- samsung,exynos4210-spi: for exynos4 and exynos5 platforms
@@ -18,14 +17,11 @@ Required SoC Specific Properties:
- interrupts: The interrupt number to the cpu. The interrupt specifier format
depends on the interrupt controller.
-[PRELIMINARY: the dma channel allocation will change once there are
-official DMA bindings]
+- dmas : Two or more DMA channel specifiers following the convention outlined
+ in bindings/dma/dma.txt
-- tx-dma-channel: The dma channel specifier for tx operations. The format of
- the dma specifier depends on the dma controller.
-
-- rx-dma-channel: The dma channel specifier for rx operations. The format of
- the dma specifier depends on the dma controller.
+- dma-names: Names for the dma channels. There must be at least one channel
+ named "tx" for transmit and named "rx" for receive.
Required Board Specific Properties:
@@ -42,15 +38,13 @@ Optional Board Specific Properties:
- num-cs: Specifies the number of chip select lines supported. If
not specified, the default number of chip select lines is set to 1.
+- cs-gpios: should specify GPIOs used for chipselects (see spi-bus.txt)
+
SPI Controller specific data in SPI slave nodes:
- The spi slave nodes should provide the following information which is required
by the spi controller.
- - cs-gpio: A gpio specifier that specifies the gpio line used as
- the slave select line by the spi controller. The format of the gpio
- specifier depends on the gpio controller.
-
- samsung,spi-feedback-delay: The sampling phase shift to be applied on the
miso line (to account for any lag in the miso line). The following are the
valid values.
@@ -74,8 +68,11 @@ Example:
compatible = "samsung,exynos4210-spi";
reg = <0x12d20000 0x100>;
interrupts = <0 66 0>;
- tx-dma-channel = <&pdma0 5>;
- rx-dma-channel = <&pdma0 4>;
+ dmas = <&pdma0 5
+ &pdma0 4>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
- Board Specific Portion:
@@ -85,6 +82,7 @@ Example:
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&spi0_bus>;
+ cs-gpios = <&gpa2 5 0>;
w25q80bw@0 {
#address-cells = <1>;
@@ -94,7 +92,6 @@ Example:
spi-max-frequency = <10000>;
controller-data {
- cs-gpio = <&gpa2 5 1 0 3>;
samsung,spi-feedback-delay = <0>;
};
diff --git a/dts/Bindings/thermal/exynos-thermal.txt b/dts/Bindings/thermal/exynos-thermal.txt
index c94909215c..ae738f562a 100644
--- a/dts/Bindings/thermal/exynos-thermal.txt
+++ b/dts/Bindings/thermal/exynos-thermal.txt
@@ -3,6 +3,7 @@
** Required properties:
- compatible : One of the following:
+ "samsung,exynos3250-tmu"
"samsung,exynos4412-tmu"
"samsung,exynos4210-tmu"
"samsung,exynos5250-tmu"
diff --git a/dts/Bindings/thermal/rcar-thermal.txt b/dts/Bindings/thermal/rcar-thermal.txt
index 28ef498a66..0ef00be44b 100644
--- a/dts/Bindings/thermal/rcar-thermal.txt
+++ b/dts/Bindings/thermal/rcar-thermal.txt
@@ -1,7 +1,13 @@
* Renesas R-Car Thermal
Required properties:
-- compatible : "renesas,rcar-thermal"
+- compatible : "renesas,thermal-<soctype>", "renesas,rcar-thermal"
+ as fallback.
+ Examples with soctypes are:
+ - "renesas,thermal-r8a73a4" (R-Mobile AP6)
+ - "renesas,thermal-r8a7779" (R-Car H1)
+ - "renesas,thermal-r8a7790" (R-Car H2)
+ - "renesas,thermal-r8a7791" (R-Car M2)
- reg : Address range of the thermal registers.
The 1st reg will be recognized as common register
if it has "interrupts".
@@ -12,18 +18,18 @@ Option properties:
Example (non interrupt support):
-thermal@e61f0100 {
- compatible = "renesas,rcar-thermal";
- reg = <0xe61f0100 0x38>;
+thermal@ffc48000 {
+ compatible = "renesas,thermal-r8a7779", "renesas,rcar-thermal";
+ reg = <0xffc48000 0x38>;
};
Example (interrupt support):
thermal@e61f0000 {
- compatible = "renesas,rcar-thermal";
+ compatible = "renesas,thermal-r8a73a4", "renesas,rcar-thermal";
reg = <0xe61f0000 0x14
0xe61f0100 0x38
0xe61f0200 0x38
0xe61f0300 0x38>;
- interrupts = <0 69 4>;
+ interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
};
diff --git a/dts/Bindings/thermal/st-thermal.txt b/dts/Bindings/thermal/st-thermal.txt
new file mode 100644
index 0000000000..3b9251b4a1
--- /dev/null
+++ b/dts/Bindings/thermal/st-thermal.txt
@@ -0,0 +1,42 @@
+Binding for Thermal Sensor driver for STMicroelectronics STi series of SoCs.
+
+Required parameters:
+-------------------
+
+compatible : st,<SoC>-<module>-thermal; should be one of:
+ "st,stih415-sas-thermal",
+ "st,stih415-mpe-thermal",
+ "st,stih416-sas-thermal"
+ "st,stih416-mpe-thermal"
+ "st,stid127-thermal" or
+ "st,stih407-thermal"
+ according to the SoC type (stih415, stih416, stid127, stih407)
+ and module type (sas or mpe). On stid127 & stih407 there is only
+ one die/module, so there is no module type in the compatible
+ string.
+clock-names : Should be "thermal".
+ See: Documentation/devicetree/bindings/resource-names.txt
+clocks : Phandle of the clock used by the thermal sensor.
+ See: Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Optional parameters:
+-------------------
+
+reg : For non-sysconf based sensors, this should be the physical base
+ address and length of the sensor's registers.
+interrupts : Standard way to define interrupt number.
+ Interrupt is mandatory to be defined when compatible is
+ "stih416-mpe-thermal".
+ NB: For thermal sensor's for which no interrupt has been
+ defined, a polling delay of 1000ms will be used to read the
+ temperature from device.
+
+Example:
+
+ temp1@fdfe8000 {
+ compatible = "st,stih416-mpe-thermal";
+ reg = <0xfdfe8000 0x10>;
+ clock-names = "thermal";
+ clocks = <&clk_m_mpethsens>;
+ interrupts = <GIC_SPI 23 IRQ_TYPE_NONE>;
+ };
diff --git a/dts/Bindings/timer/cirrus,clps711x-timer.txt b/dts/Bindings/timer/cirrus,clps711x-timer.txt
new file mode 100644
index 0000000000..cd55b52548
--- /dev/null
+++ b/dts/Bindings/timer/cirrus,clps711x-timer.txt
@@ -0,0 +1,29 @@
+* Cirrus Logic CLPS711X Timer Counter
+
+Required properties:
+- compatible: Shall contain "cirrus,clps711x-timer".
+- reg : Address and length of the register set.
+- interrupts: The interrupt number of the timer.
+- clocks : phandle of timer reference clock.
+
+Note: Each timer should have an alias correctly numbered in "aliases" node.
+
+Example:
+ aliases {
+ timer0 = &timer1;
+ timer1 = &timer2;
+ };
+
+ timer1: timer@80000300 {
+ compatible = "cirrus,ep7312-timer", "cirrus,clps711x-timer";
+ reg = <0x80000300 0x4>;
+ interrupts = <8>;
+ clocks = <&clks 5>;
+ };
+
+ timer2: timer@80000340 {
+ compatible = "cirrus,ep7312-timer", "cirrus,clps711x-timer";
+ reg = <0x80000340 0x4>;
+ interrupts = <9>;
+ clocks = <&clks 6>;
+ };
diff --git a/dts/Bindings/timer/mediatek,mtk-timer.txt b/dts/Bindings/timer/mediatek,mtk-timer.txt
new file mode 100644
index 0000000000..7c4408ff4b
--- /dev/null
+++ b/dts/Bindings/timer/mediatek,mtk-timer.txt
@@ -0,0 +1,17 @@
+Mediatek MT6577, MT6572 and MT6589 Timers
+---------------------------------------
+
+Required properties:
+- compatible: Should be "mediatek,mt6577-timer"
+- reg: Should contain location and length for timers register.
+- clocks: Clocks driving the timer hardware. This list should include two
+ clocks. The order is system clock and as second clock the RTC clock.
+
+Examples:
+
+ timer@10008000 {
+ compatible = "mediatek,mt6577-timer";
+ reg = <0x10008000 0x80>;
+ interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&system_clk>, <&rtc_clk>;
+ };
diff --git a/dts/Bindings/timer/renesas,cmt.txt b/dts/Bindings/timer/renesas,cmt.txt
new file mode 100644
index 0000000000..a17418b0ec
--- /dev/null
+++ b/dts/Bindings/timer/renesas,cmt.txt
@@ -0,0 +1,47 @@
+* Renesas R-Car Compare Match Timer (CMT)
+
+The CMT is a multi-channel 16/32/48-bit timer/counter with configurable clock
+inputs and programmable compare match.
+
+Channels share hardware resources but their counter and compare match value
+are independent. A particular CMT instance can implement only a subset of the
+channels supported by the CMT model. Channel indices represent the hardware
+position of the channel in the CMT and don't match the channel numbers in the
+datasheets.
+
+Required Properties:
+
+ - compatible: must contain one of the following.
+ - "renesas,cmt-32" for the 32-bit CMT
+ (CMT0 on sh7372, sh73a0 and r8a7740)
+ - "renesas,cmt-32-fast" for the 32-bit CMT with fast clock support
+ (CMT[234] on sh7372, sh73a0 and r8a7740)
+ - "renesas,cmt-48" for the 48-bit CMT
+ (CMT1 on sh7372, sh73a0 and r8a7740)
+ - "renesas,cmt-48-gen2" for the second generation 48-bit CMT
+ (CMT[01] on r8a73a4, r8a7790 and r8a7791)
+
+ - reg: base address and length of the registers block for the timer module.
+ - interrupts: interrupt-specifier for the timer, one per channel.
+ - clocks: a list of phandle + clock-specifier pairs, one for each entry
+ in clock-names.
+ - clock-names: must contain "fck" for the functional clock.
+
+ - renesas,channels-mask: bitmask of the available channels.
+
+
+Example: R8A7790 (R-Car H2) CMT0 node
+
+ CMT0 on R8A7790 implements hardware channels 5 and 6 only and names
+ them channels 0 and 1 in the documentation.
+
+ cmt0: timer@ffca0000 {
+ compatible = "renesas,cmt-48-gen2";
+ reg = <0 0xffca0000 0 0x1004>;
+ interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>,
+ <0 142 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp1_clks R8A7790_CLK_CMT0>;
+ clock-names = "fck";
+
+ renesas,channels-mask = <0x60>;
+ };
diff --git a/dts/Bindings/timer/renesas,mtu2.txt b/dts/Bindings/timer/renesas,mtu2.txt
new file mode 100644
index 0000000000..917453f826
--- /dev/null
+++ b/dts/Bindings/timer/renesas,mtu2.txt
@@ -0,0 +1,39 @@
+* Renesas R-Car Multi-Function Timer Pulse Unit 2 (MTU2)
+
+The MTU2 is a multi-purpose, multi-channel timer/counter with configurable
+clock inputs and programmable compare match.
+
+Channels share hardware resources but their counter and compare match value
+are independent. The MTU2 hardware supports five channels indexed from 0 to 4.
+
+Required Properties:
+
+ - compatible: must contain "renesas,mtu2"
+
+ - reg: base address and length of the registers block for the timer module.
+
+ - interrupts: interrupt specifiers for the timer, one for each entry in
+ interrupt-names.
+ - interrupt-names: must contain one entry named "tgi?a" for each enabled
+ channel, where "?" is the channel index expressed as one digit from "0" to
+ "4".
+
+ - clocks: a list of phandle + clock-specifier pairs, one for each entry
+ in clock-names.
+ - clock-names: must contain "fck" for the functional clock.
+
+
+Example: R7S72100 (RZ/A1H) MTU2 node
+
+ mtu2: timer@fcff0000 {
+ compatible = "renesas,mtu2";
+ reg = <0xfcff0000 0x400>;
+ interrupts = <0 139 IRQ_TYPE_LEVEL_HIGH>,
+ <0 146 IRQ_TYPE_LEVEL_HIGH>,
+ <0 150 IRQ_TYPE_LEVEL_HIGH>,
+ <0 154 IRQ_TYPE_LEVEL_HIGH>,
+ <0 159 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tgi0a", "tgi1a", "tgi2a", "tgi3a", "tgi4a";
+ clocks = <&mstp3_clks R7S72100_CLK_MTU2>;
+ clock-names = "fck";
+ };
diff --git a/dts/Bindings/timer/renesas,tmu.txt b/dts/Bindings/timer/renesas,tmu.txt
new file mode 100644
index 0000000000..425d0c5f4a
--- /dev/null
+++ b/dts/Bindings/timer/renesas,tmu.txt
@@ -0,0 +1,39 @@
+* Renesas R-Car Timer Unit (TMU)
+
+The TMU is a 32-bit timer/counter with configurable clock inputs and
+programmable compare match.
+
+Channels share hardware resources but their counter and compare match value
+are independent. The TMU hardware supports up to three channels.
+
+Required Properties:
+
+ - compatible: must contain "renesas,tmu"
+
+ - reg: base address and length of the registers block for the timer module.
+
+ - interrupts: interrupt-specifier for the timer, one per channel.
+
+ - clocks: a list of phandle + clock-specifier pairs, one for each entry
+ in clock-names.
+ - clock-names: must contain "fck" for the functional clock.
+
+Optional Properties:
+
+ - #renesas,channels: number of channels implemented by the timer, must be 2
+ or 3 (if not specified the value defaults to 3).
+
+
+Example: R8A7779 (R-Car H1) TMU0 node
+
+ tmu0: timer@ffd80000 {
+ compatible = "renesas,tmu";
+ reg = <0xffd80000 0x30>;
+ interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>,
+ <0 33 IRQ_TYPE_LEVEL_HIGH>,
+ <0 34 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp0_clks R8A7779_CLK_TMU0>;
+ clock-names = "fck";
+
+ #renesas,channels = <3>;
+ };
diff --git a/dts/Bindings/usb/ci-hdrc-imx.txt b/dts/Bindings/usb/ci-hdrc-imx.txt
index a6a32cb7f7..1bae71e9ad 100644
--- a/dts/Bindings/usb/ci-hdrc-imx.txt
+++ b/dts/Bindings/usb/ci-hdrc-imx.txt
@@ -4,6 +4,7 @@ Required properties:
- compatible: Should be "fsl,imx27-usb"
- reg: Should contain registers location and length
- interrupts: Should contain controller interrupt
+- fsl,usbphy: phandle of usb phy that connects to the port
Recommended properies:
- phy_type: the type of the phy connected to the core. Should be one
@@ -12,7 +13,6 @@ Recommended properies:
- dr_mode: One of "host", "peripheral" or "otg". Defaults to "otg"
Optional properties:
-- fsl,usbphy: phandler of usb phy that connects to the only one port
- fsl,usbmisc: phandler of non-core register device, with one argument
that indicate usb controller index
- vbus-supply: regulator for vbus
diff --git a/dts/Bindings/usb/nvidia,tegra20-usb-phy.txt b/dts/Bindings/usb/nvidia,tegra20-usb-phy.txt
index ba797d3e63..c9205fbf26 100644
--- a/dts/Bindings/usb/nvidia,tegra20-usb-phy.txt
+++ b/dts/Bindings/usb/nvidia,tegra20-usb-phy.txt
@@ -20,6 +20,12 @@ Required properties :
Present if phy_type == utmi.
- ulpi-link: The clock Tegra provides to the ULPI PHY (cdev2).
Present if phy_type == ulpi, and ULPI link mode is in use.
+ - resets : Must contain an entry for each entry in reset-names.
+ See ../reset/reset.txt for details.
+ - reset-names : Must include the following entries:
+ - usb: The PHY's own reset signal.
+ - utmi-pads: The reset of the PHY containing the chip-wide UTMI pad control
+ registers. Required even if phy_type == ulpi.
Required properties for phy_type == ulpi:
- nvidia,phy-reset-gpio : The GPIO used to reset the PHY.
@@ -56,6 +62,8 @@ Optional properties:
host means this is a host controller
peripheral means it is device controller
otg means it can operate as either ("on the go")
+ - nvidia,has-utmi-pad-registers : boolean indicates whether this controller
+ contains the UTMI pad control registers common to all USB controllers.
VBUS control (required for dr_mode == otg, optional for dr_mode == host):
- vbus-supply: regulator for VBUS
diff --git a/dts/Bindings/usb/usb-xhci.txt b/dts/Bindings/usb/usb-xhci.txt
index 5a79377c6a..86f67f0886 100644
--- a/dts/Bindings/usb/usb-xhci.txt
+++ b/dts/Bindings/usb/usb-xhci.txt
@@ -9,8 +9,9 @@ Required properties:
register set for the device.
- interrupts: one XHCI interrupt should be described here.
-Optional property:
+Optional properties:
- clocks: reference to a clock
+ - usb3-lpm-capable: determines if platform is USB3 LPM capable
Example:
usb@f0931000 {
diff --git a/dts/Bindings/vendor-prefixes.txt b/dts/Bindings/vendor-prefixes.txt
index 46a311e728..ac7269f907 100644
--- a/dts/Bindings/vendor-prefixes.txt
+++ b/dts/Bindings/vendor-prefixes.txt
@@ -6,6 +6,7 @@ using them to avoid name-space collisions.
abilis Abilis Systems
active-semi Active-Semi International Inc
ad Avionic Design GmbH
+adapteva Adapteva, Inc.
adi Analog Devices, Inc.
aeroflexgaisler Aeroflex Gaisler AB
ak Asahi Kasei Corp.
@@ -42,6 +43,7 @@ dmo Data Modul AG
ebv EBV Elektronik
edt Emerging Display Technologies
emmicro EM Microelectronic
+epcos EPCOS AG
epfl Ecole Polytechnique Fédérale de Lausanne
epson Seiko Epson Corp.
est ESTeem Wireless Modems
@@ -71,12 +73,14 @@ karo Ka-Ro electronics GmbH
keymile Keymile GmbH
lacie LaCie
lantiq Lantiq Semiconductor
+lenovo Lenovo Group Ltd.
lg LG Corporation
linux Linux-specific binding
lsi LSI Corp. (LSI Logic)
lltc Linear Technology Corporation
marvell Marvell Technology Group Ltd.
maxim Maxim Integrated Products
+mediatek MediaTek Inc.
micrel Micrel Inc.
microchip Microchip Technology Inc.
mosaixtech Mosaix Technologies, Inc.
@@ -99,6 +103,7 @@ panasonic Panasonic Corporation
phytec PHYTEC Messtechnik GmbH
picochip Picochip Ltd
plathome Plat'Home Co., Ltd.
+pixcir PIXCIR MICROELECTRONICS Co., Ltd
powervr PowerVR (deprecated, use img)
qca Qualcomm Atheros, Inc.
qcom Qualcomm Technologies, Inc
@@ -122,6 +127,7 @@ sii Seiko Instruments, Inc.
sirf SiRF Technology, Inc.
smsc Standard Microsystems Corporation
snps Synopsys, Inc.
+solidrun SolidRun
spansion Spansion Inc.
st STMicroelectronics
ste ST-Ericsson
diff --git a/dts/Bindings/video/arm,pl11x.txt b/dts/Bindings/video/arm,pl11x.txt
new file mode 100644
index 0000000000..3e3039a8a2
--- /dev/null
+++ b/dts/Bindings/video/arm,pl11x.txt
@@ -0,0 +1,109 @@
+* ARM PrimeCell Color LCD Controller PL110/PL111
+
+See also Documentation/devicetree/bindings/arm/primecell.txt
+
+Required properties:
+
+- compatible: must be one of:
+ "arm,pl110", "arm,primecell"
+ "arm,pl111", "arm,primecell"
+
+- reg: base address and size of the control registers block
+
+- interrupt-names: either the single entry "combined" representing a
+ combined interrupt output (CLCDINTR), or the four entries
+ "mbe", "vcomp", "lnbu", "fuf" representing the individual
+ CLCDMBEINTR, CLCDVCOMPINTR, CLCDLNBUINTR, CLCDFUFINTR interrupts
+
+- interrupts: contains an interrupt specifier for each entry in
+ interrupt-names
+
+- clock-names: should contain "clcdclk" and "apb_pclk"
+
+- clocks: contains phandle and clock specifier pairs for the entries
+ in the clock-names property. See
+ Documentation/devicetree/binding/clock/clock-bindings.txt
+
+Optional properties:
+
+- memory-region: phandle to a node describing memory (see
+ Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt)
+ to be used for the framebuffer; if not present, the framebuffer
+ may be located anywhere in the memory
+
+- max-memory-bandwidth: maximum bandwidth in bytes per second that the
+ cell's memory interface can handle; if not present, the memory
+ interface is fast enough to handle all possible video modes
+
+Required sub-nodes:
+
+- port: describes LCD panel signals, following the common binding
+ for video transmitter interfaces; see
+ Documentation/devicetree/bindings/media/video-interfaces.txt;
+ when it is a TFT panel, the port's endpoint must define the
+ following property:
+
+ - arm,pl11x,tft-r0g0b0-pads: an array of three 32-bit values,
+ defining the way CLD pads are wired up; first value
+ contains index of the "CLD" external pin (pad) used
+ as R0 (first bit of the red component), second value
+ index of the pad used as G0, third value index of the
+ pad used as B0, see also "LCD panel signal multiplexing
+ details" paragraphs in the PL110/PL111 Technical
+ Reference Manuals; this implicitly defines available
+ color modes, for example:
+ - PL111 TFT 4:4:4 panel:
+ arm,pl11x,tft-r0g0b0-pads = <4 15 20>;
+ - PL110 TFT (1:)5:5:5 panel:
+ arm,pl11x,tft-r0g0b0-pads = <1 7 13>;
+ - PL111 TFT (1:)5:5:5 panel:
+ arm,pl11x,tft-r0g0b0-pads = <3 11 19>;
+ - PL111 TFT 5:6:5 panel:
+ arm,pl11x,tft-r0g0b0-pads = <3 10 19>;
+ - PL110 and PL111 TFT 8:8:8 panel:
+ arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
+ - PL110 and PL111 TFT 8:8:8 panel, R & B components swapped:
+ arm,pl11x,tft-r0g0b0-pads = <16 8 0>;
+
+
+Example:
+
+ clcd@10020000 {
+ compatible = "arm,pl111", "arm,primecell";
+ reg = <0x10020000 0x1000>;
+ interrupt-names = "combined";
+ interrupts = <0 44 4>;
+ clocks = <&oscclk1>, <&oscclk2>;
+ clock-names = "clcdclk", "apb_pclk";
+ max-memory-bandwidth = <94371840>; /* Bps, 1024x768@60 16bpp */
+
+ port {
+ clcd_pads: endpoint {
+ remote-endpoint = <&clcd_panel>;
+ arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
+ };
+ };
+
+ };
+
+ panel {
+ compatible = "panel-dpi";
+
+ port {
+ clcd_panel: endpoint {
+ remote-endpoint = <&clcd_pads>;
+ };
+ };
+
+ panel-timing {
+ clock-frequency = <25175000>;
+ hactive = <640>;
+ hback-porch = <40>;
+ hfront-porch = <24>;
+ hsync-len = <96>;
+ vactive = <480>;
+ vback-porch = <32>;
+ vfront-porch = <11>;
+ vsync-len = <2>;
+ };
+ };
diff --git a/dts/Bindings/video/atmel,lcdc.txt b/dts/Bindings/video/atmel,lcdc.txt
index 1ec175eddc..b75af94a5e 100644
--- a/dts/Bindings/video/atmel,lcdc.txt
+++ b/dts/Bindings/video/atmel,lcdc.txt
@@ -46,6 +46,7 @@ Required properties (as per of_videomode_helper):
Optional properties (as per of_videomode_helper):
- atmel,lcdcon-backlight: enable backlight
+ - atmel,lcdcon-backlight-inverted: invert backlight PWM polarity
- atmel,lcd-wiring-mode: lcd wiring mode "RGB" or "BRG"
- atmel,power-control-gpio: gpio to power on or off the LCD (as many as needed)
diff --git a/dts/Bindings/video/cirrus,clps711x-fb.txt b/dts/Bindings/video/cirrus,clps711x-fb.txt
new file mode 100644
index 0000000000..6fc3c6adee
--- /dev/null
+++ b/dts/Bindings/video/cirrus,clps711x-fb.txt
@@ -0,0 +1,47 @@
+* Currus Logic CLPS711X Framebuffer
+
+Required properties:
+- compatible: Shall contain "cirrus,clps711x-fb".
+- reg : Physical base address and length of the controller's registers +
+ location and size of the framebuffer memory.
+- clocks : phandle + clock specifier pair of the FB reference clock.
+- display : phandle to a display node as described in
+ Documentation/devicetree/bindings/video/display-timing.txt.
+ Additionally, the display node has to define properties:
+ - bits-per-pixel: Bits per pixel.
+ - ac-prescale : LCD AC bias frequency. This frequency is the required
+ AC bias frequency for a given manufacturer's LCD plate.
+ - cmap-invert : Invert the color levels (Optional).
+
+Optional properties:
+- lcd-supply: Regulator for LCD supply voltage.
+
+Example:
+ fb: fb@800002c0 {
+ compatible = "cirrus,ep7312-fb", "cirrus,clps711x-fb";
+ reg = <0x800002c0 0xd44>, <0x60000000 0xc000>;
+ clocks = <&clks 2>;
+ lcd-supply = <&reg5v0>;
+ display = <&display>;
+ };
+
+ display: display {
+ model = "320x240x4";
+ native-mode = <&timing0>;
+ bits-per-pixel = <4>;
+ ac-prescale = <17>;
+
+ display-timings {
+ timing0: 320x240 {
+ hactive = <320>;
+ hback-porch = <0>;
+ hfront-porch = <0>;
+ hsync-len = <0>;
+ vactive = <240>;
+ vback-porch = <0>;
+ vfront-porch = <0>;
+ vsync-len = <0>;
+ clock-frequency = <6500000>;
+ };
+ };
+ };
diff --git a/dts/Bindings/video/exynos_dsim.txt b/dts/Bindings/video/exynos_dsim.txt
index 33b5730d07..31036c667d 100644
--- a/dts/Bindings/video/exynos_dsim.txt
+++ b/dts/Bindings/video/exynos_dsim.txt
@@ -1,7 +1,9 @@
Exynos MIPI DSI Master
Required properties:
- - compatible: "samsung,exynos4210-mipi-dsi"
+ - compatible: value should be one of the following
+ "samsung,exynos4210-mipi-dsi" /* for Exynos4 SoCs */
+ "samsung,exynos5410-mipi-dsi" /* for Exynos5410/5420/5440 SoCs */
- reg: physical base address and length of the registers set for the device
- interrupts: should contain DSI interrupt
- clocks: list of clock specifiers, must contain an entry for each required
diff --git a/dts/Bindings/video/exynos_mixer.txt b/dts/Bindings/video/exynos_mixer.txt
index 7bfde9c9d6..08b394b1ed 100644
--- a/dts/Bindings/video/exynos_mixer.txt
+++ b/dts/Bindings/video/exynos_mixer.txt
@@ -4,8 +4,9 @@ Required properties:
- compatible: value should be one of the following:
1) "samsung,exynos5-mixer" <DEPRECATED>
2) "samsung,exynos4210-mixer"
- 3) "samsung,exynos5250-mixer"
- 4) "samsung,exynos5420-mixer"
+ 3) "samsung,exynos4212-mixer"
+ 4) "samsung,exynos5250-mixer"
+ 5) "samsung,exynos5420-mixer"
- reg: physical base address of the mixer and length of memory mapped
region.
diff --git a/dts/Bindings/video/samsung-fimd.txt b/dts/Bindings/video/samsung-fimd.txt
index 2dad41b689..ecc899b981 100644
--- a/dts/Bindings/video/samsung-fimd.txt
+++ b/dts/Bindings/video/samsung-fimd.txt
@@ -8,8 +8,6 @@ Required properties:
- compatible: value should be one of the following
"samsung,s3c2443-fimd"; /* for S3C24XX SoCs */
"samsung,s3c6400-fimd"; /* for S3C64XX SoCs */
- "samsung,s5p6440-fimd"; /* for S5P64X0 SoCs */
- "samsung,s5pc100-fimd"; /* for S5PC100 SoC */
"samsung,s5pv210-fimd"; /* for S5PV210 SoC */
"samsung,exynos4210-fimd"; /* for Exynos4 SoCs */
"samsung,exynos5250-fimd"; /* for Exynos5 SoCs */
@@ -44,6 +42,34 @@ Optional Properties:
- display-timings: timing settings for FIMD, as described in document [1].
Can be used in case timings cannot be provided otherwise
or to override timings provided by the panel.
+- samsung,sysreg: handle to syscon used to control the system registers
+- i80-if-timings: timing configuration for lcd i80 interface support.
+ - cs-setup: clock cycles for the active period of address signal is enabled
+ until chip select is enabled.
+ If not specified, the default value(0) will be used.
+ - wr-setup: clock cycles for the active period of CS signal is enabled until
+ write signal is enabled.
+ If not specified, the default value(0) will be used.
+ - wr-active: clock cycles for the active period of CS is enabled.
+ If not specified, the default value(1) will be used.
+ - wr-hold: clock cycles for the active period of CS is disabled until write
+ signal is disabled.
+ If not specified, the default value(0) will be used.
+
+ The parameters are defined as:
+
+ VCLK(internal) __|??????|_____|??????|_____|??????|_____|??????|_____|??
+ : : : : :
+ Address Output --:<XXXXXXXXXXX:XXXXXXXXXXXX:XXXXXXXXXXXX:XXXXXXXXXXXX:XX
+ | cs-setup+1 | : : :
+ |<---------->| : : :
+ Chip Select ???????????????|____________:____________:____________|??
+ | wr-setup+1 | | wr-hold+1 |
+ |<---------->| |<---------->|
+ Write Enable ????????????????????????????|____________|???????????????
+ | wr-active+1|
+ |<---------->|
+ Video Data ----------------------------<XXXXXXXXXXXXXXXXXXXXXXXXX>--
The device node can contain 'port' child nodes according to the bindings defined
in [2]. The following are properties specific to those nodes:
diff --git a/dts/Bindings/watchdog/fsl-imx-wdt.txt b/dts/Bindings/watchdog/fsl-imx-wdt.txt
index 2144af1a52..e52ba2da86 100644
--- a/dts/Bindings/watchdog/fsl-imx-wdt.txt
+++ b/dts/Bindings/watchdog/fsl-imx-wdt.txt
@@ -5,10 +5,15 @@ Required properties:
- reg : Should contain WDT registers location and length
- interrupts : Should contain WDT interrupt
+Optional property:
+- big-endian: If present the watchdog device's registers are implemented
+ in big endian mode, otherwise in little mode.
+
Examples:
wdt@73f98000 {
compatible = "fsl,imx51-wdt", "fsl,imx21-wdt";
reg = <0x73f98000 0x4000>;
interrupts = <58>;
+ big-endian;
};
diff --git a/dts/include/dt-bindings/clock/clps711x-clock.h b/dts/include/dt-bindings/clock/clps711x-clock.h
new file mode 100644
index 0000000000..0c4c80b632
--- /dev/null
+++ b/dts/include/dt-bindings/clock/clps711x-clock.h
@@ -0,0 +1,27 @@
+/*
+ * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_CLPS711X_H
+#define __DT_BINDINGS_CLOCK_CLPS711X_H
+
+#define CLPS711X_CLK_DUMMY 0
+#define CLPS711X_CLK_CPU 1
+#define CLPS711X_CLK_BUS 2
+#define CLPS711X_CLK_PLL 3
+#define CLPS711X_CLK_TIMERREF 4
+#define CLPS711X_CLK_TIMER1 5
+#define CLPS711X_CLK_TIMER2 6
+#define CLPS711X_CLK_PWM 7
+#define CLPS711X_CLK_SPIREF 8
+#define CLPS711X_CLK_SPI 9
+#define CLPS711X_CLK_UART 10
+#define CLPS711X_CLK_TICK 11
+#define CLPS711X_CLK_MAX 12
+
+#endif
diff --git a/dts/include/dt-bindings/clock/exynos4.h b/dts/include/dt-bindings/clock/exynos4.h
index 1106ca540a..459bd2bd41 100644
--- a/dts/include/dt-bindings/clock/exynos4.h
+++ b/dts/include/dt-bindings/clock/exynos4.h
@@ -1,6 +1,6 @@
/*
* Copyright (c) 2013 Samsung Electronics Co., Ltd.
- * Author: Andrzej Haja <a.hajda@samsung.com>
+ * Author: Andrzej Hajda <a.hajda@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -34,6 +34,11 @@
#define CLK_MOUT_CORE 19
#define CLK_MOUT_APLL 20
#define CLK_SCLK_HDMIPHY 22
+#define CLK_OUT_DMC 23
+#define CLK_OUT_TOP 24
+#define CLK_OUT_LEFTBUS 25
+#define CLK_OUT_RIGHTBUS 26
+#define CLK_OUT_CPU 27
/* gate for special clocks (sclk) */
#define CLK_SCLK_FIMC0 128
@@ -230,6 +235,24 @@
#define CLK_MOUT_G3D 394
#define CLK_ACLK400_MCUISP 395 /* Exynos4x12 only */
+/* gate clocks - ppmu */
+#define CLK_PPMULEFT 400
+#define CLK_PPMURIGHT 401
+#define CLK_PPMUCAMIF 402
+#define CLK_PPMUTV 403
+#define CLK_PPMUMFC_L 404
+#define CLK_PPMUMFC_R 405
+#define CLK_PPMUG3D 406
+#define CLK_PPMUIMAGE 407
+#define CLK_PPMULCD0 408
+#define CLK_PPMULCD1 409 /* Exynos4210 only */
+#define CLK_PPMUFILE 410
+#define CLK_PPMUGPS 411
+#define CLK_PPMUDMC0 412
+#define CLK_PPMUDMC1 413
+#define CLK_PPMUCPU 414
+#define CLK_PPMUACP 415
+
/* div clocks */
#define CLK_DIV_ISP0 450 /* Exynos4x12 only */
#define CLK_DIV_ISP1 451 /* Exynos4x12 only */
diff --git a/dts/include/dt-bindings/clock/exynos5250.h b/dts/include/dt-bindings/clock/exynos5250.h
index be6e97c54f..4273891dc7 100644
--- a/dts/include/dt-bindings/clock/exynos5250.h
+++ b/dts/include/dt-bindings/clock/exynos5250.h
@@ -1,6 +1,6 @@
/*
* Copyright (c) 2013 Samsung Electronics Co., Ltd.
- * Author: Andrzej Haja <a.hajda@samsung.com>
+ * Author: Andrzej Hajda <a.hajda@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
diff --git a/dts/include/dt-bindings/clock/exynos5420.h b/dts/include/dt-bindings/clock/exynos5420.h
index 21d51ae1d2..8dc0913f17 100644
--- a/dts/include/dt-bindings/clock/exynos5420.h
+++ b/dts/include/dt-bindings/clock/exynos5420.h
@@ -1,6 +1,6 @@
/*
* Copyright (c) 2013 Samsung Electronics Co., Ltd.
- * Author: Andrzej Haja <a.hajda@samsung.com>
+ * Author: Andrzej Hajda <a.hajda@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
diff --git a/dts/include/dt-bindings/clock/exynos5440.h b/dts/include/dt-bindings/clock/exynos5440.h
index 70cd85077f..c66fc405a7 100644
--- a/dts/include/dt-bindings/clock/exynos5440.h
+++ b/dts/include/dt-bindings/clock/exynos5440.h
@@ -1,6 +1,6 @@
/*
* Copyright (c) 2013 Samsung Electronics Co., Ltd.
- * Author: Andrzej Haja <a.hajda-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
+ * Author: Andrzej Hajda <a.hajda@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
diff --git a/dts/include/dt-bindings/clock/imx1-clock.h b/dts/include/dt-bindings/clock/imx1-clock.h
new file mode 100644
index 0000000000..607bf01a31
--- /dev/null
+++ b/dts/include/dt-bindings/clock/imx1-clock.h
@@ -0,0 +1,40 @@
+/*
+ * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_IMX1_H
+#define __DT_BINDINGS_CLOCK_IMX1_H
+
+#define IMX1_CLK_DUMMY 0
+#define IMX1_CLK_CLK32 1
+#define IMX1_CLK_CLK16M_EXT 2
+#define IMX1_CLK_CLK16M 3
+#define IMX1_CLK_CLK32_PREMULT 4
+#define IMX1_CLK_PREM 5
+#define IMX1_CLK_MPLL 6
+#define IMX1_CLK_MPLL_GATE 7
+#define IMX1_CLK_SPLL 8
+#define IMX1_CLK_SPLL_GATE 9
+#define IMX1_CLK_MCU 10
+#define IMX1_CLK_FCLK 11
+#define IMX1_CLK_HCLK 12
+#define IMX1_CLK_CLK48M 13
+#define IMX1_CLK_PER1 14
+#define IMX1_CLK_PER2 15
+#define IMX1_CLK_PER3 16
+#define IMX1_CLK_CLKO 17
+#define IMX1_CLK_UART3_GATE 18
+#define IMX1_CLK_SSI2_GATE 19
+#define IMX1_CLK_BROM_GATE 20
+#define IMX1_CLK_DMA_GATE 21
+#define IMX1_CLK_CSI_GATE 22
+#define IMX1_CLK_MMA_GATE 23
+#define IMX1_CLK_USBD_GATE 24
+#define IMX1_CLK_MAX 25
+
+#endif
diff --git a/dts/include/dt-bindings/clock/imx21-clock.h b/dts/include/dt-bindings/clock/imx21-clock.h
new file mode 100644
index 0000000000..b13596cf51
--- /dev/null
+++ b/dts/include/dt-bindings/clock/imx21-clock.h
@@ -0,0 +1,80 @@
+/*
+ * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_IMX21_H
+#define __DT_BINDINGS_CLOCK_IMX21_H
+
+#define IMX21_CLK_DUMMY 0
+#define IMX21_CLK_CKIL 1
+#define IMX21_CLK_CKIH 2
+#define IMX21_CLK_FPM 3
+#define IMX21_CLK_CKIH_DIV1P5 4
+#define IMX21_CLK_MPLL_GATE 5
+#define IMX21_CLK_SPLL_GATE 6
+#define IMX21_CLK_FPM_GATE 7
+#define IMX21_CLK_CKIH_GATE 8
+#define IMX21_CLK_MPLL_OSC_SEL 9
+#define IMX21_CLK_IPG 10
+#define IMX21_CLK_HCLK 11
+#define IMX21_CLK_MPLL_SEL 12
+#define IMX21_CLK_SPLL_SEL 13
+#define IMX21_CLK_SSI1_SEL 14
+#define IMX21_CLK_SSI2_SEL 15
+#define IMX21_CLK_USB_DIV 16
+#define IMX21_CLK_FCLK 17
+#define IMX21_CLK_MPLL 18
+#define IMX21_CLK_SPLL 19
+#define IMX21_CLK_NFC_DIV 20
+#define IMX21_CLK_SSI1_DIV 21
+#define IMX21_CLK_SSI2_DIV 22
+#define IMX21_CLK_PER1 23
+#define IMX21_CLK_PER2 24
+#define IMX21_CLK_PER3 25
+#define IMX21_CLK_PER4 26
+#define IMX21_CLK_UART1_IPG_GATE 27
+#define IMX21_CLK_UART2_IPG_GATE 28
+#define IMX21_CLK_UART3_IPG_GATE 29
+#define IMX21_CLK_UART4_IPG_GATE 30
+#define IMX21_CLK_CSPI1_IPG_GATE 31
+#define IMX21_CLK_CSPI2_IPG_GATE 32
+#define IMX21_CLK_SSI1_GATE 33
+#define IMX21_CLK_SSI2_GATE 34
+#define IMX21_CLK_SDHC1_IPG_GATE 35
+#define IMX21_CLK_SDHC2_IPG_GATE 36
+#define IMX21_CLK_GPIO_GATE 37
+#define IMX21_CLK_I2C_GATE 38
+#define IMX21_CLK_DMA_GATE 39
+#define IMX21_CLK_USB_GATE 40
+#define IMX21_CLK_EMMA_GATE 41
+#define IMX21_CLK_SSI2_BAUD_GATE 42
+#define IMX21_CLK_SSI1_BAUD_GATE 43
+#define IMX21_CLK_LCDC_IPG_GATE 44
+#define IMX21_CLK_NFC_GATE 45
+#define IMX21_CLK_LCDC_HCLK_GATE 46
+#define IMX21_CLK_PER4_GATE 47
+#define IMX21_CLK_BMI_GATE 48
+#define IMX21_CLK_USB_HCLK_GATE 49
+#define IMX21_CLK_SLCDC_GATE 50
+#define IMX21_CLK_SLCDC_HCLK_GATE 51
+#define IMX21_CLK_EMMA_HCLK_GATE 52
+#define IMX21_CLK_BROM_GATE 53
+#define IMX21_CLK_DMA_HCLK_GATE 54
+#define IMX21_CLK_CSI_HCLK_GATE 55
+#define IMX21_CLK_CSPI3_IPG_GATE 56
+#define IMX21_CLK_WDOG_GATE 57
+#define IMX21_CLK_GPT1_IPG_GATE 58
+#define IMX21_CLK_GPT2_IPG_GATE 59
+#define IMX21_CLK_GPT3_IPG_GATE 60
+#define IMX21_CLK_PWM_IPG_GATE 61
+#define IMX21_CLK_RTC_GATE 62
+#define IMX21_CLK_KPP_GATE 63
+#define IMX21_CLK_OWIRE_GATE 64
+#define IMX21_CLK_MAX 65
+
+#endif
diff --git a/dts/include/dt-bindings/clock/imx27-clock.h b/dts/include/dt-bindings/clock/imx27-clock.h
new file mode 100644
index 0000000000..148b053e54
--- /dev/null
+++ b/dts/include/dt-bindings/clock/imx27-clock.h
@@ -0,0 +1,108 @@
+/*
+ * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_IMX27_H
+#define __DT_BINDINGS_CLOCK_IMX27_H
+
+#define IMX27_CLK_DUMMY 0
+#define IMX27_CLK_CKIH 1
+#define IMX27_CLK_CKIL 2
+#define IMX27_CLK_MPLL 3
+#define IMX27_CLK_SPLL 4
+#define IMX27_CLK_MPLL_MAIN2 5
+#define IMX27_CLK_AHB 6
+#define IMX27_CLK_IPG 7
+#define IMX27_CLK_NFC_DIV 8
+#define IMX27_CLK_PER1_DIV 9
+#define IMX27_CLK_PER2_DIV 10
+#define IMX27_CLK_PER3_DIV 11
+#define IMX27_CLK_PER4_DIV 12
+#define IMX27_CLK_VPU_SEL 13
+#define IMX27_CLK_VPU_DIV 14
+#define IMX27_CLK_USB_DIV 15
+#define IMX27_CLK_CPU_SEL 16
+#define IMX27_CLK_CLKO_SEL 17
+#define IMX27_CLK_CPU_DIV 18
+#define IMX27_CLK_CLKO_DIV 19
+#define IMX27_CLK_SSI1_SEL 20
+#define IMX27_CLK_SSI2_SEL 21
+#define IMX27_CLK_SSI1_DIV 22
+#define IMX27_CLK_SSI2_DIV 23
+#define IMX27_CLK_CLKO_EN 24
+#define IMX27_CLK_SSI2_IPG_GATE 25
+#define IMX27_CLK_SSI1_IPG_GATE 26
+#define IMX27_CLK_SLCDC_IPG_GATE 27
+#define IMX27_CLK_SDHC3_IPG_GATE 28
+#define IMX27_CLK_SDHC2_IPG_GATE 29
+#define IMX27_CLK_SDHC1_IPG_GATE 30
+#define IMX27_CLK_SCC_IPG_GATE 31
+#define IMX27_CLK_SAHARA_IPG_GATE 32
+#define IMX27_CLK_RTC_IPG_GATE 33
+#define IMX27_CLK_PWM_IPG_GATE 34
+#define IMX27_CLK_OWIRE_IPG_GATE 35
+#define IMX27_CLK_LCDC_IPG_GATE 36
+#define IMX27_CLK_KPP_IPG_GATE 37
+#define IMX27_CLK_IIM_IPG_GATE 38
+#define IMX27_CLK_I2C2_IPG_GATE 39
+#define IMX27_CLK_I2C1_IPG_GATE 40
+#define IMX27_CLK_GPT6_IPG_GATE 41
+#define IMX27_CLK_GPT5_IPG_GATE 42
+#define IMX27_CLK_GPT4_IPG_GATE 43
+#define IMX27_CLK_GPT3_IPG_GATE 44
+#define IMX27_CLK_GPT2_IPG_GATE 45
+#define IMX27_CLK_GPT1_IPG_GATE 46
+#define IMX27_CLK_GPIO_IPG_GATE 47
+#define IMX27_CLK_FEC_IPG_GATE 48
+#define IMX27_CLK_EMMA_IPG_GATE 49
+#define IMX27_CLK_DMA_IPG_GATE 50
+#define IMX27_CLK_CSPI3_IPG_GATE 51
+#define IMX27_CLK_CSPI2_IPG_GATE 52
+#define IMX27_CLK_CSPI1_IPG_GATE 53
+#define IMX27_CLK_NFC_BAUD_GATE 54
+#define IMX27_CLK_SSI2_BAUD_GATE 55
+#define IMX27_CLK_SSI1_BAUD_GATE 56
+#define IMX27_CLK_VPU_BAUD_GATE 57
+#define IMX27_CLK_PER4_GATE 58
+#define IMX27_CLK_PER3_GATE 59
+#define IMX27_CLK_PER2_GATE 60
+#define IMX27_CLK_PER1_GATE 61
+#define IMX27_CLK_USB_AHB_GATE 62
+#define IMX27_CLK_SLCDC_AHB_GATE 63
+#define IMX27_CLK_SAHARA_AHB_GATE 64
+#define IMX27_CLK_LCDC_AHB_GATE 65
+#define IMX27_CLK_VPU_AHB_GATE 66
+#define IMX27_CLK_FEC_AHB_GATE 67
+#define IMX27_CLK_EMMA_AHB_GATE 68
+#define IMX27_CLK_EMI_AHB_GATE 69
+#define IMX27_CLK_DMA_AHB_GATE 70
+#define IMX27_CLK_CSI_AHB_GATE 71
+#define IMX27_CLK_BROM_AHB_GATE 72
+#define IMX27_CLK_ATA_AHB_GATE 73
+#define IMX27_CLK_WDOG_IPG_GATE 74
+#define IMX27_CLK_USB_IPG_GATE 75
+#define IMX27_CLK_UART6_IPG_GATE 76
+#define IMX27_CLK_UART5_IPG_GATE 77
+#define IMX27_CLK_UART4_IPG_GATE 78
+#define IMX27_CLK_UART3_IPG_GATE 79
+#define IMX27_CLK_UART2_IPG_GATE 80
+#define IMX27_CLK_UART1_IPG_GATE 81
+#define IMX27_CLK_CKIH_DIV1P5 82
+#define IMX27_CLK_FPM 83
+#define IMX27_CLK_MPLL_OSC_SEL 84
+#define IMX27_CLK_MPLL_SEL 85
+#define IMX27_CLK_SPLL_GATE 86
+#define IMX27_CLK_MSHC_DIV 87
+#define IMX27_CLK_RTIC_IPG_GATE 88
+#define IMX27_CLK_MSHC_IPG_GATE 89
+#define IMX27_CLK_RTIC_AHB_GATE 90
+#define IMX27_CLK_MSHC_BAUD_GATE 91
+#define IMX27_CLK_CKIH_GATE 92
+#define IMX27_CLK_MAX 93
+
+#endif
diff --git a/dts/include/dt-bindings/clock/imx6qdl-clock.h b/dts/include/dt-bindings/clock/imx6qdl-clock.h
new file mode 100644
index 0000000000..654151e242
--- /dev/null
+++ b/dts/include/dt-bindings/clock/imx6qdl-clock.h
@@ -0,0 +1,224 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_IMX6QDL_H
+#define __DT_BINDINGS_CLOCK_IMX6QDL_H
+
+#define IMX6QDL_CLK_DUMMY 0
+#define IMX6QDL_CLK_CKIL 1
+#define IMX6QDL_CLK_CKIH 2
+#define IMX6QDL_CLK_OSC 3
+#define IMX6QDL_CLK_PLL2_PFD0_352M 4
+#define IMX6QDL_CLK_PLL2_PFD1_594M 5
+#define IMX6QDL_CLK_PLL2_PFD2_396M 6
+#define IMX6QDL_CLK_PLL3_PFD0_720M 7
+#define IMX6QDL_CLK_PLL3_PFD1_540M 8
+#define IMX6QDL_CLK_PLL3_PFD2_508M 9
+#define IMX6QDL_CLK_PLL3_PFD3_454M 10
+#define IMX6QDL_CLK_PLL2_198M 11
+#define IMX6QDL_CLK_PLL3_120M 12
+#define IMX6QDL_CLK_PLL3_80M 13
+#define IMX6QDL_CLK_PLL3_60M 14
+#define IMX6QDL_CLK_TWD 15
+#define IMX6QDL_CLK_STEP 16
+#define IMX6QDL_CLK_PLL1_SW 17
+#define IMX6QDL_CLK_PERIPH_PRE 18
+#define IMX6QDL_CLK_PERIPH2_PRE 19
+#define IMX6QDL_CLK_PERIPH_CLK2_SEL 20
+#define IMX6QDL_CLK_PERIPH2_CLK2_SEL 21
+#define IMX6QDL_CLK_AXI_SEL 22
+#define IMX6QDL_CLK_ESAI_SEL 23
+#define IMX6QDL_CLK_ASRC_SEL 24
+#define IMX6QDL_CLK_SPDIF_SEL 25
+#define IMX6QDL_CLK_GPU2D_AXI 26
+#define IMX6QDL_CLK_GPU3D_AXI 27
+#define IMX6QDL_CLK_GPU2D_CORE_SEL 28
+#define IMX6QDL_CLK_GPU3D_CORE_SEL 29
+#define IMX6QDL_CLK_GPU3D_SHADER_SEL 30
+#define IMX6QDL_CLK_IPU1_SEL 31
+#define IMX6QDL_CLK_IPU2_SEL 32
+#define IMX6QDL_CLK_LDB_DI0_SEL 33
+#define IMX6QDL_CLK_LDB_DI1_SEL 34
+#define IMX6QDL_CLK_IPU1_DI0_PRE_SEL 35
+#define IMX6QDL_CLK_IPU1_DI1_PRE_SEL 36
+#define IMX6QDL_CLK_IPU2_DI0_PRE_SEL 37
+#define IMX6QDL_CLK_IPU2_DI1_PRE_SEL 38
+#define IMX6QDL_CLK_IPU1_DI0_SEL 39
+#define IMX6QDL_CLK_IPU1_DI1_SEL 40
+#define IMX6QDL_CLK_IPU2_DI0_SEL 41
+#define IMX6QDL_CLK_IPU2_DI1_SEL 42
+#define IMX6QDL_CLK_HSI_TX_SEL 43
+#define IMX6QDL_CLK_PCIE_AXI_SEL 44
+#define IMX6QDL_CLK_SSI1_SEL 45
+#define IMX6QDL_CLK_SSI2_SEL 46
+#define IMX6QDL_CLK_SSI3_SEL 47
+#define IMX6QDL_CLK_USDHC1_SEL 48
+#define IMX6QDL_CLK_USDHC2_SEL 49
+#define IMX6QDL_CLK_USDHC3_SEL 50
+#define IMX6QDL_CLK_USDHC4_SEL 51
+#define IMX6QDL_CLK_ENFC_SEL 52
+#define IMX6QDL_CLK_EMI_SEL 53
+#define IMX6QDL_CLK_EMI_SLOW_SEL 54
+#define IMX6QDL_CLK_VDO_AXI_SEL 55
+#define IMX6QDL_CLK_VPU_AXI_SEL 56
+#define IMX6QDL_CLK_CKO1_SEL 57
+#define IMX6QDL_CLK_PERIPH 58
+#define IMX6QDL_CLK_PERIPH2 59
+#define IMX6QDL_CLK_PERIPH_CLK2 60
+#define IMX6QDL_CLK_PERIPH2_CLK2 61
+#define IMX6QDL_CLK_IPG 62
+#define IMX6QDL_CLK_IPG_PER 63
+#define IMX6QDL_CLK_ESAI_PRED 64
+#define IMX6QDL_CLK_ESAI_PODF 65
+#define IMX6QDL_CLK_ASRC_PRED 66
+#define IMX6QDL_CLK_ASRC_PODF 67
+#define IMX6QDL_CLK_SPDIF_PRED 68
+#define IMX6QDL_CLK_SPDIF_PODF 69
+#define IMX6QDL_CLK_CAN_ROOT 70
+#define IMX6QDL_CLK_ECSPI_ROOT 71
+#define IMX6QDL_CLK_GPU2D_CORE_PODF 72
+#define IMX6QDL_CLK_GPU3D_CORE_PODF 73
+#define IMX6QDL_CLK_GPU3D_SHADER 74
+#define IMX6QDL_CLK_IPU1_PODF 75
+#define IMX6QDL_CLK_IPU2_PODF 76
+#define IMX6QDL_CLK_LDB_DI0_PODF 77
+#define IMX6QDL_CLK_LDB_DI1_PODF 78
+#define IMX6QDL_CLK_IPU1_DI0_PRE 79
+#define IMX6QDL_CLK_IPU1_DI1_PRE 80
+#define IMX6QDL_CLK_IPU2_DI0_PRE 81
+#define IMX6QDL_CLK_IPU2_DI1_PRE 82
+#define IMX6QDL_CLK_HSI_TX_PODF 83
+#define IMX6QDL_CLK_SSI1_PRED 84
+#define IMX6QDL_CLK_SSI1_PODF 85
+#define IMX6QDL_CLK_SSI2_PRED 86
+#define IMX6QDL_CLK_SSI2_PODF 87
+#define IMX6QDL_CLK_SSI3_PRED 88
+#define IMX6QDL_CLK_SSI3_PODF 89
+#define IMX6QDL_CLK_UART_SERIAL_PODF 90
+#define IMX6QDL_CLK_USDHC1_PODF 91
+#define IMX6QDL_CLK_USDHC2_PODF 92
+#define IMX6QDL_CLK_USDHC3_PODF 93
+#define IMX6QDL_CLK_USDHC4_PODF 94
+#define IMX6QDL_CLK_ENFC_PRED 95
+#define IMX6QDL_CLK_ENFC_PODF 96
+#define IMX6QDL_CLK_EMI_PODF 97
+#define IMX6QDL_CLK_EMI_SLOW_PODF 98
+#define IMX6QDL_CLK_VPU_AXI_PODF 99
+#define IMX6QDL_CLK_CKO1_PODF 100
+#define IMX6QDL_CLK_AXI 101
+#define IMX6QDL_CLK_MMDC_CH0_AXI_PODF 102
+#define IMX6QDL_CLK_MMDC_CH1_AXI_PODF 103
+#define IMX6QDL_CLK_ARM 104
+#define IMX6QDL_CLK_AHB 105
+#define IMX6QDL_CLK_APBH_DMA 106
+#define IMX6QDL_CLK_ASRC 107
+#define IMX6QDL_CLK_CAN1_IPG 108
+#define IMX6QDL_CLK_CAN1_SERIAL 109
+#define IMX6QDL_CLK_CAN2_IPG 110
+#define IMX6QDL_CLK_CAN2_SERIAL 111
+#define IMX6QDL_CLK_ECSPI1 112
+#define IMX6QDL_CLK_ECSPI2 113
+#define IMX6QDL_CLK_ECSPI3 114
+#define IMX6QDL_CLK_ECSPI4 115
+#define IMX6Q_CLK_ECSPI5 116
+#define IMX6DL_CLK_I2C4 116
+#define IMX6QDL_CLK_ENET 117
+#define IMX6QDL_CLK_ESAI 118
+#define IMX6QDL_CLK_GPT_IPG 119
+#define IMX6QDL_CLK_GPT_IPG_PER 120
+#define IMX6QDL_CLK_GPU2D_CORE 121
+#define IMX6QDL_CLK_GPU3D_CORE 122
+#define IMX6QDL_CLK_HDMI_IAHB 123
+#define IMX6QDL_CLK_HDMI_ISFR 124
+#define IMX6QDL_CLK_I2C1 125
+#define IMX6QDL_CLK_I2C2 126
+#define IMX6QDL_CLK_I2C3 127
+#define IMX6QDL_CLK_IIM 128
+#define IMX6QDL_CLK_ENFC 129
+#define IMX6QDL_CLK_IPU1 130
+#define IMX6QDL_CLK_IPU1_DI0 131
+#define IMX6QDL_CLK_IPU1_DI1 132
+#define IMX6QDL_CLK_IPU2 133
+#define IMX6QDL_CLK_IPU2_DI0 134
+#define IMX6QDL_CLK_LDB_DI0 135
+#define IMX6QDL_CLK_LDB_DI1 136
+#define IMX6QDL_CLK_IPU2_DI1 137
+#define IMX6QDL_CLK_HSI_TX 138
+#define IMX6QDL_CLK_MLB 139
+#define IMX6QDL_CLK_MMDC_CH0_AXI 140
+#define IMX6QDL_CLK_MMDC_CH1_AXI 141
+#define IMX6QDL_CLK_OCRAM 142
+#define IMX6QDL_CLK_OPENVG_AXI 143
+#define IMX6QDL_CLK_PCIE_AXI 144
+#define IMX6QDL_CLK_PWM1 145
+#define IMX6QDL_CLK_PWM2 146
+#define IMX6QDL_CLK_PWM3 147
+#define IMX6QDL_CLK_PWM4 148
+#define IMX6QDL_CLK_PER1_BCH 149
+#define IMX6QDL_CLK_GPMI_BCH_APB 150
+#define IMX6QDL_CLK_GPMI_BCH 151
+#define IMX6QDL_CLK_GPMI_IO 152
+#define IMX6QDL_CLK_GPMI_APB 153
+#define IMX6QDL_CLK_SATA 154
+#define IMX6QDL_CLK_SDMA 155
+#define IMX6QDL_CLK_SPBA 156
+#define IMX6QDL_CLK_SSI1 157
+#define IMX6QDL_CLK_SSI2 158
+#define IMX6QDL_CLK_SSI3 159
+#define IMX6QDL_CLK_UART_IPG 160
+#define IMX6QDL_CLK_UART_SERIAL 161
+#define IMX6QDL_CLK_USBOH3 162
+#define IMX6QDL_CLK_USDHC1 163
+#define IMX6QDL_CLK_USDHC2 164
+#define IMX6QDL_CLK_USDHC3 165
+#define IMX6QDL_CLK_USDHC4 166
+#define IMX6QDL_CLK_VDO_AXI 167
+#define IMX6QDL_CLK_VPU_AXI 168
+#define IMX6QDL_CLK_CKO1 169
+#define IMX6QDL_CLK_PLL1_SYS 170
+#define IMX6QDL_CLK_PLL2_BUS 171
+#define IMX6QDL_CLK_PLL3_USB_OTG 172
+#define IMX6QDL_CLK_PLL4_AUDIO 173
+#define IMX6QDL_CLK_PLL5_VIDEO 174
+#define IMX6QDL_CLK_PLL8_MLB 175
+#define IMX6QDL_CLK_PLL7_USB_HOST 176
+#define IMX6QDL_CLK_PLL6_ENET 177
+#define IMX6QDL_CLK_SSI1_IPG 178
+#define IMX6QDL_CLK_SSI2_IPG 179
+#define IMX6QDL_CLK_SSI3_IPG 180
+#define IMX6QDL_CLK_ROM 181
+#define IMX6QDL_CLK_USBPHY1 182
+#define IMX6QDL_CLK_USBPHY2 183
+#define IMX6QDL_CLK_LDB_DI0_DIV_3_5 184
+#define IMX6QDL_CLK_LDB_DI1_DIV_3_5 185
+#define IMX6QDL_CLK_SATA_REF 186
+#define IMX6QDL_CLK_SATA_REF_100M 187
+#define IMX6QDL_CLK_PCIE_REF 188
+#define IMX6QDL_CLK_PCIE_REF_125M 189
+#define IMX6QDL_CLK_ENET_REF 190
+#define IMX6QDL_CLK_USBPHY1_GATE 191
+#define IMX6QDL_CLK_USBPHY2_GATE 192
+#define IMX6QDL_CLK_PLL4_POST_DIV 193
+#define IMX6QDL_CLK_PLL5_POST_DIV 194
+#define IMX6QDL_CLK_PLL5_VIDEO_DIV 195
+#define IMX6QDL_CLK_EIM_SLOW 196
+#define IMX6QDL_CLK_SPDIF 197
+#define IMX6QDL_CLK_CKO2_SEL 198
+#define IMX6QDL_CLK_CKO2_PODF 199
+#define IMX6QDL_CLK_CKO2 200
+#define IMX6QDL_CLK_CKO 201
+#define IMX6QDL_CLK_VDOA 202
+#define IMX6QDL_CLK_PLL4_AUDIO_DIV 203
+#define IMX6QDL_CLK_LVDS1_SEL 204
+#define IMX6QDL_CLK_LVDS2_SEL 205
+#define IMX6QDL_CLK_LVDS1_GATE 206
+#define IMX6QDL_CLK_LVDS2_GATE 207
+#define IMX6QDL_CLK_ESAI_AHB 208
+#define IMX6QDL_CLK_END 209
+
+#endif /* __DT_BINDINGS_CLOCK_IMX6QDL_H */
diff --git a/dts/include/dt-bindings/clock/qcom,gcc-apq8084.h b/dts/include/dt-bindings/clock/qcom,gcc-apq8084.h
new file mode 100644
index 0000000000..2c0da566c4
--- /dev/null
+++ b/dts/include/dt-bindings/clock/qcom,gcc-apq8084.h
@@ -0,0 +1,351 @@
+/*
+ * Copyright (c) 2014, The Linux Foundation. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _DT_BINDINGS_CLK_APQ_GCC_8084_H
+#define _DT_BINDINGS_CLK_APQ_GCC_8084_H
+
+#define GPLL0 0
+#define GPLL0_VOTE 1
+#define GPLL1 2
+#define GPLL1_VOTE 3
+#define GPLL2 4
+#define GPLL2_VOTE 5
+#define GPLL3 6
+#define GPLL3_VOTE 7
+#define GPLL4 8
+#define GPLL4_VOTE 9
+#define CONFIG_NOC_CLK_SRC 10
+#define PERIPH_NOC_CLK_SRC 11
+#define SYSTEM_NOC_CLK_SRC 12
+#define BLSP_UART_SIM_CLK_SRC 13
+#define QDSS_TSCTR_CLK_SRC 14
+#define UFS_AXI_CLK_SRC 15
+#define RPM_CLK_SRC 16
+#define KPSS_AHB_CLK_SRC 17
+#define QDSS_AT_CLK_SRC 18
+#define BIMC_DDR_CLK_SRC 19
+#define USB30_MASTER_CLK_SRC 20
+#define USB30_SEC_MASTER_CLK_SRC 21
+#define USB_HSIC_AHB_CLK_SRC 22
+#define MMSS_BIMC_GFX_CLK_SRC 23
+#define QDSS_STM_CLK_SRC 24
+#define ACC_CLK_SRC 25
+#define SEC_CTRL_CLK_SRC 26
+#define BLSP1_QUP1_I2C_APPS_CLK_SRC 27
+#define BLSP1_QUP1_SPI_APPS_CLK_SRC 28
+#define BLSP1_QUP2_I2C_APPS_CLK_SRC 29
+#define BLSP1_QUP2_SPI_APPS_CLK_SRC 30
+#define BLSP1_QUP3_I2C_APPS_CLK_SRC 31
+#define BLSP1_QUP3_SPI_APPS_CLK_SRC 32
+#define BLSP1_QUP4_I2C_APPS_CLK_SRC 33
+#define BLSP1_QUP4_SPI_APPS_CLK_SRC 34
+#define BLSP1_QUP5_I2C_APPS_CLK_SRC 35
+#define BLSP1_QUP5_SPI_APPS_CLK_SRC 36
+#define BLSP1_QUP6_I2C_APPS_CLK_SRC 37
+#define BLSP1_QUP6_SPI_APPS_CLK_SRC 38
+#define BLSP1_UART1_APPS_CLK_SRC 39
+#define BLSP1_UART2_APPS_CLK_SRC 40
+#define BLSP1_UART3_APPS_CLK_SRC 41
+#define BLSP1_UART4_APPS_CLK_SRC 42
+#define BLSP1_UART5_APPS_CLK_SRC 43
+#define BLSP1_UART6_APPS_CLK_SRC 44
+#define BLSP2_QUP1_I2C_APPS_CLK_SRC 45
+#define BLSP2_QUP1_SPI_APPS_CLK_SRC 46
+#define BLSP2_QUP2_I2C_APPS_CLK_SRC 47
+#define BLSP2_QUP2_SPI_APPS_CLK_SRC 48
+#define BLSP2_QUP3_I2C_APPS_CLK_SRC 49
+#define BLSP2_QUP3_SPI_APPS_CLK_SRC 50
+#define BLSP2_QUP4_I2C_APPS_CLK_SRC 51
+#define BLSP2_QUP4_SPI_APPS_CLK_SRC 52
+#define BLSP2_QUP5_I2C_APPS_CLK_SRC 53
+#define BLSP2_QUP5_SPI_APPS_CLK_SRC 54
+#define BLSP2_QUP6_I2C_APPS_CLK_SRC 55
+#define BLSP2_QUP6_SPI_APPS_CLK_SRC 56
+#define BLSP2_UART1_APPS_CLK_SRC 57
+#define BLSP2_UART2_APPS_CLK_SRC 58
+#define BLSP2_UART3_APPS_CLK_SRC 59
+#define BLSP2_UART4_APPS_CLK_SRC 60
+#define BLSP2_UART5_APPS_CLK_SRC 61
+#define BLSP2_UART6_APPS_CLK_SRC 62
+#define CE1_CLK_SRC 63
+#define CE2_CLK_SRC 64
+#define CE3_CLK_SRC 65
+#define GP1_CLK_SRC 66
+#define GP2_CLK_SRC 67
+#define GP3_CLK_SRC 68
+#define PDM2_CLK_SRC 69
+#define QDSS_TRACECLKIN_CLK_SRC 70
+#define RBCPR_CLK_SRC 71
+#define SATA_ASIC0_CLK_SRC 72
+#define SATA_PMALIVE_CLK_SRC 73
+#define SATA_RX_CLK_SRC 74
+#define SATA_RX_OOB_CLK_SRC 75
+#define SDCC1_APPS_CLK_SRC 76
+#define SDCC2_APPS_CLK_SRC 77
+#define SDCC3_APPS_CLK_SRC 78
+#define SDCC4_APPS_CLK_SRC 79
+#define GCC_SNOC_BUS_TIMEOUT0_AHB_CLK 80
+#define SPMI_AHB_CLK_SRC 81
+#define SPMI_SER_CLK_SRC 82
+#define TSIF_REF_CLK_SRC 83
+#define USB30_MOCK_UTMI_CLK_SRC 84
+#define USB30_SEC_MOCK_UTMI_CLK_SRC 85
+#define USB_HS_SYSTEM_CLK_SRC 86
+#define USB_HSIC_CLK_SRC 87
+#define USB_HSIC_IO_CAL_CLK_SRC 88
+#define USB_HSIC_MOCK_UTMI_CLK_SRC 89
+#define USB_HSIC_SYSTEM_CLK_SRC 90
+#define GCC_BAM_DMA_AHB_CLK 91
+#define GCC_BAM_DMA_INACTIVITY_TIMERS_CLK 92
+#define DDR_CLK_SRC 93
+#define GCC_BIMC_CFG_AHB_CLK 94
+#define GCC_BIMC_CLK 95
+#define GCC_BIMC_KPSS_AXI_CLK 96
+#define GCC_BIMC_SLEEP_CLK 97
+#define GCC_BIMC_SYSNOC_AXI_CLK 98
+#define GCC_BIMC_XO_CLK 99
+#define GCC_BLSP1_AHB_CLK 100
+#define GCC_BLSP1_SLEEP_CLK 101
+#define GCC_BLSP1_QUP1_I2C_APPS_CLK 102
+#define GCC_BLSP1_QUP1_SPI_APPS_CLK 103
+#define GCC_BLSP1_QUP2_I2C_APPS_CLK 104
+#define GCC_BLSP1_QUP2_SPI_APPS_CLK 105
+#define GCC_BLSP1_QUP3_I2C_APPS_CLK 106
+#define GCC_BLSP1_QUP3_SPI_APPS_CLK 107
+#define GCC_BLSP1_QUP4_I2C_APPS_CLK 108
+#define GCC_BLSP1_QUP4_SPI_APPS_CLK 109
+#define GCC_BLSP1_QUP5_I2C_APPS_CLK 110
+#define GCC_BLSP1_QUP5_SPI_APPS_CLK 111
+#define GCC_BLSP1_QUP6_I2C_APPS_CLK 112
+#define GCC_BLSP1_QUP6_SPI_APPS_CLK 113
+#define GCC_BLSP1_UART1_APPS_CLK 114
+#define GCC_BLSP1_UART1_SIM_CLK 115
+#define GCC_BLSP1_UART2_APPS_CLK 116
+#define GCC_BLSP1_UART2_SIM_CLK 117
+#define GCC_BLSP1_UART3_APPS_CLK 118
+#define GCC_BLSP1_UART3_SIM_CLK 119
+#define GCC_BLSP1_UART4_APPS_CLK 120
+#define GCC_BLSP1_UART4_SIM_CLK 121
+#define GCC_BLSP1_UART5_APPS_CLK 122
+#define GCC_BLSP1_UART5_SIM_CLK 123
+#define GCC_BLSP1_UART6_APPS_CLK 124
+#define GCC_BLSP1_UART6_SIM_CLK 125
+#define GCC_BLSP2_AHB_CLK 126
+#define GCC_BLSP2_SLEEP_CLK 127
+#define GCC_BLSP2_QUP1_I2C_APPS_CLK 128
+#define GCC_BLSP2_QUP1_SPI_APPS_CLK 129
+#define GCC_BLSP2_QUP2_I2C_APPS_CLK 130
+#define GCC_BLSP2_QUP2_SPI_APPS_CLK 131
+#define GCC_BLSP2_QUP3_I2C_APPS_CLK 132
+#define GCC_BLSP2_QUP3_SPI_APPS_CLK 133
+#define GCC_BLSP2_QUP4_I2C_APPS_CLK 134
+#define GCC_BLSP2_QUP4_SPI_APPS_CLK 135
+#define GCC_BLSP2_QUP5_I2C_APPS_CLK 136
+#define GCC_BLSP2_QUP5_SPI_APPS_CLK 137
+#define GCC_BLSP2_QUP6_I2C_APPS_CLK 138
+#define GCC_BLSP2_QUP6_SPI_APPS_CLK 139
+#define GCC_BLSP2_UART1_APPS_CLK 140
+#define GCC_BLSP2_UART1_SIM_CLK 141
+#define GCC_BLSP2_UART2_APPS_CLK 142
+#define GCC_BLSP2_UART2_SIM_CLK 143
+#define GCC_BLSP2_UART3_APPS_CLK 144
+#define GCC_BLSP2_UART3_SIM_CLK 145
+#define GCC_BLSP2_UART4_APPS_CLK 146
+#define GCC_BLSP2_UART4_SIM_CLK 147
+#define GCC_BLSP2_UART5_APPS_CLK 148
+#define GCC_BLSP2_UART5_SIM_CLK 149
+#define GCC_BLSP2_UART6_APPS_CLK 150
+#define GCC_BLSP2_UART6_SIM_CLK 151
+#define GCC_BOOT_ROM_AHB_CLK 152
+#define GCC_CE1_AHB_CLK 153
+#define GCC_CE1_AXI_CLK 154
+#define GCC_CE1_CLK 155
+#define GCC_CE2_AHB_CLK 156
+#define GCC_CE2_AXI_CLK 157
+#define GCC_CE2_CLK 158
+#define GCC_CE3_AHB_CLK 159
+#define GCC_CE3_AXI_CLK 160
+#define GCC_CE3_CLK 161
+#define GCC_CNOC_BUS_TIMEOUT0_AHB_CLK 162
+#define GCC_CNOC_BUS_TIMEOUT1_AHB_CLK 163
+#define GCC_CNOC_BUS_TIMEOUT2_AHB_CLK 164
+#define GCC_CNOC_BUS_TIMEOUT3_AHB_CLK 165
+#define GCC_CNOC_BUS_TIMEOUT4_AHB_CLK 166
+#define GCC_CNOC_BUS_TIMEOUT5_AHB_CLK 167
+#define GCC_CNOC_BUS_TIMEOUT6_AHB_CLK 168
+#define GCC_CNOC_BUS_TIMEOUT7_AHB_CLK 169
+#define GCC_CFG_NOC_AHB_CLK 170
+#define GCC_CFG_NOC_DDR_CFG_CLK 171
+#define GCC_CFG_NOC_RPM_AHB_CLK 172
+#define GCC_COPSS_SMMU_AHB_CLK 173
+#define GCC_COPSS_SMMU_AXI_CLK 174
+#define GCC_DCD_XO_CLK 175
+#define GCC_BIMC_DDR_CH0_CLK 176
+#define GCC_BIMC_DDR_CH1_CLK 177
+#define GCC_BIMC_DDR_CPLL0_CLK 178
+#define GCC_BIMC_DDR_CPLL1_CLK 179
+#define GCC_BIMC_GFX_CLK 180
+#define GCC_DDR_DIM_CFG_CLK 181
+#define GCC_DDR_DIM_SLEEP_CLK 182
+#define GCC_DEHR_CLK 183
+#define GCC_AHB_CLK 184
+#define GCC_IM_SLEEP_CLK 185
+#define GCC_XO_CLK 186
+#define GCC_XO_DIV4_CLK 187
+#define GCC_GP1_CLK 188
+#define GCC_GP2_CLK 189
+#define GCC_GP3_CLK 190
+#define GCC_IMEM_AXI_CLK 191
+#define GCC_IMEM_CFG_AHB_CLK 192
+#define GCC_KPSS_AHB_CLK 193
+#define GCC_KPSS_AXI_CLK 194
+#define GCC_LPASS_MPORT_AXI_CLK 195
+#define GCC_LPASS_Q6_AXI_CLK 196
+#define GCC_LPASS_SWAY_CLK 197
+#define GCC_MMSS_BIMC_GFX_CLK 198
+#define GCC_MMSS_NOC_AT_CLK 199
+#define GCC_MMSS_NOC_CFG_AHB_CLK 200
+#define GCC_MMSS_VPU_MAPLE_SYS_NOC_AXI_CLK 201
+#define GCC_OCMEM_NOC_CFG_AHB_CLK 202
+#define GCC_OCMEM_SYS_NOC_AXI_CLK 203
+#define GCC_MPM_AHB_CLK 204
+#define GCC_MSG_RAM_AHB_CLK 205
+#define GCC_NOC_CONF_XPU_AHB_CLK 206
+#define GCC_PDM2_CLK 207
+#define GCC_PDM_AHB_CLK 208
+#define GCC_PDM_XO4_CLK 209
+#define GCC_PERIPH_NOC_AHB_CLK 210
+#define GCC_PERIPH_NOC_AT_CLK 211
+#define GCC_PERIPH_NOC_CFG_AHB_CLK 212
+#define GCC_PERIPH_NOC_USB_HSIC_AHB_CLK 213
+#define GCC_PERIPH_NOC_MPU_CFG_AHB_CLK 214
+#define GCC_PERIPH_XPU_AHB_CLK 215
+#define GCC_PNOC_BUS_TIMEOUT0_AHB_CLK 216
+#define GCC_PNOC_BUS_TIMEOUT1_AHB_CLK 217
+#define GCC_PNOC_BUS_TIMEOUT2_AHB_CLK 218
+#define GCC_PNOC_BUS_TIMEOUT3_AHB_CLK 219
+#define GCC_PNOC_BUS_TIMEOUT4_AHB_CLK 220
+#define GCC_PRNG_AHB_CLK 221
+#define GCC_QDSS_AT_CLK 222
+#define GCC_QDSS_CFG_AHB_CLK 223
+#define GCC_QDSS_DAP_AHB_CLK 224
+#define GCC_QDSS_DAP_CLK 225
+#define GCC_QDSS_ETR_USB_CLK 226
+#define GCC_QDSS_STM_CLK 227
+#define GCC_QDSS_TRACECLKIN_CLK 228
+#define GCC_QDSS_TSCTR_DIV16_CLK 229
+#define GCC_QDSS_TSCTR_DIV2_CLK 230
+#define GCC_QDSS_TSCTR_DIV3_CLK 231
+#define GCC_QDSS_TSCTR_DIV4_CLK 232
+#define GCC_QDSS_TSCTR_DIV8_CLK 233
+#define GCC_QDSS_RBCPR_XPU_AHB_CLK 234
+#define GCC_RBCPR_AHB_CLK 235
+#define GCC_RBCPR_CLK 236
+#define GCC_RPM_BUS_AHB_CLK 237
+#define GCC_RPM_PROC_HCLK 238
+#define GCC_RPM_SLEEP_CLK 239
+#define GCC_RPM_TIMER_CLK 240
+#define GCC_SATA_ASIC0_CLK 241
+#define GCC_SATA_AXI_CLK 242
+#define GCC_SATA_CFG_AHB_CLK 243
+#define GCC_SATA_PMALIVE_CLK 244
+#define GCC_SATA_RX_CLK 245
+#define GCC_SATA_RX_OOB_CLK 246
+#define GCC_SDCC1_AHB_CLK 247
+#define GCC_SDCC1_APPS_CLK 248
+#define GCC_SDCC1_CDCCAL_FF_CLK 249
+#define GCC_SDCC1_CDCCAL_SLEEP_CLK 250
+#define GCC_SDCC2_AHB_CLK 251
+#define GCC_SDCC2_APPS_CLK 252
+#define GCC_SDCC2_INACTIVITY_TIMERS_CLK 253
+#define GCC_SDCC3_AHB_CLK 254
+#define GCC_SDCC3_APPS_CLK 255
+#define GCC_SDCC3_INACTIVITY_TIMERS_CLK 256
+#define GCC_SDCC4_AHB_CLK 257
+#define GCC_SDCC4_APPS_CLK 258
+#define GCC_SDCC4_INACTIVITY_TIMERS_CLK 259
+#define GCC_SEC_CTRL_ACC_CLK 260
+#define GCC_SEC_CTRL_AHB_CLK 261
+#define GCC_SEC_CTRL_BOOT_ROM_PATCH_CLK 262
+#define GCC_SEC_CTRL_CLK 263
+#define GCC_SEC_CTRL_SENSE_CLK 264
+#define GCC_SNOC_BUS_TIMEOUT2_AHB_CLK 265
+#define GCC_SNOC_BUS_TIMEOUT3_AHB_CLK 266
+#define GCC_SPDM_BIMC_CY_CLK 267
+#define GCC_SPDM_CFG_AHB_CLK 268
+#define GCC_SPDM_DEBUG_CY_CLK 269
+#define GCC_SPDM_FF_CLK 270
+#define GCC_SPDM_MSTR_AHB_CLK 271
+#define GCC_SPDM_PNOC_CY_CLK 272
+#define GCC_SPDM_RPM_CY_CLK 273
+#define GCC_SPDM_SNOC_CY_CLK 274
+#define GCC_SPMI_AHB_CLK 275
+#define GCC_SPMI_CNOC_AHB_CLK 276
+#define GCC_SPMI_SER_CLK 277
+#define GCC_SPSS_AHB_CLK 278
+#define GCC_SNOC_CNOC_AHB_CLK 279
+#define GCC_SNOC_PNOC_AHB_CLK 280
+#define GCC_SYS_NOC_AT_CLK 281
+#define GCC_SYS_NOC_AXI_CLK 282
+#define GCC_SYS_NOC_KPSS_AHB_CLK 283
+#define GCC_SYS_NOC_QDSS_STM_AXI_CLK 284
+#define GCC_SYS_NOC_UFS_AXI_CLK 285
+#define GCC_SYS_NOC_USB3_AXI_CLK 286
+#define GCC_SYS_NOC_USB3_SEC_AXI_CLK 287
+#define GCC_TCSR_AHB_CLK 288
+#define GCC_TLMM_AHB_CLK 289
+#define GCC_TLMM_CLK 290
+#define GCC_TSIF_AHB_CLK 291
+#define GCC_TSIF_INACTIVITY_TIMERS_CLK 292
+#define GCC_TSIF_REF_CLK 293
+#define GCC_UFS_AHB_CLK 294
+#define GCC_UFS_AXI_CLK 295
+#define GCC_UFS_RX_CFG_CLK 296
+#define GCC_UFS_RX_SYMBOL_0_CLK 297
+#define GCC_UFS_RX_SYMBOL_1_CLK 298
+#define GCC_UFS_TX_CFG_CLK 299
+#define GCC_UFS_TX_SYMBOL_0_CLK 300
+#define GCC_UFS_TX_SYMBOL_1_CLK 301
+#define GCC_USB2A_PHY_SLEEP_CLK 302
+#define GCC_USB2B_PHY_SLEEP_CLK 303
+#define GCC_USB30_MASTER_CLK 304
+#define GCC_USB30_MOCK_UTMI_CLK 305
+#define GCC_USB30_SLEEP_CLK 306
+#define GCC_USB30_SEC_MASTER_CLK 307
+#define GCC_USB30_SEC_MOCK_UTMI_CLK 308
+#define GCC_USB30_SEC_SLEEP_CLK 309
+#define GCC_USB_HS_AHB_CLK 310
+#define GCC_USB_HS_INACTIVITY_TIMERS_CLK 311
+#define GCC_USB_HS_SYSTEM_CLK 312
+#define GCC_USB_HSIC_AHB_CLK 313
+#define GCC_USB_HSIC_CLK 314
+#define GCC_USB_HSIC_IO_CAL_CLK 315
+#define GCC_USB_HSIC_IO_CAL_SLEEP_CLK 316
+#define GCC_USB_HSIC_MOCK_UTMI_CLK 317
+#define GCC_USB_HSIC_SYSTEM_CLK 318
+#define PCIE_0_AUX_CLK_SRC 319
+#define PCIE_0_PIPE_CLK_SRC 320
+#define PCIE_1_AUX_CLK_SRC 321
+#define PCIE_1_PIPE_CLK_SRC 322
+#define GCC_PCIE_0_AUX_CLK 323
+#define GCC_PCIE_0_CFG_AHB_CLK 324
+#define GCC_PCIE_0_MSTR_AXI_CLK 325
+#define GCC_PCIE_0_PIPE_CLK 326
+#define GCC_PCIE_0_SLV_AXI_CLK 327
+#define GCC_PCIE_1_AUX_CLK 328
+#define GCC_PCIE_1_CFG_AHB_CLK 329
+#define GCC_PCIE_1_MSTR_AXI_CLK 330
+#define GCC_PCIE_1_PIPE_CLK 331
+#define GCC_PCIE_1_SLV_AXI_CLK 332
+
+#endif
diff --git a/dts/include/dt-bindings/clock/qcom,gcc-ipq806x.h b/dts/include/dt-bindings/clock/qcom,gcc-ipq806x.h
new file mode 100644
index 0000000000..b857cadb0b
--- /dev/null
+++ b/dts/include/dt-bindings/clock/qcom,gcc-ipq806x.h
@@ -0,0 +1,293 @@
+/*
+ * Copyright (c) 2014, The Linux Foundation. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _DT_BINDINGS_CLK_GCC_IPQ806X_H
+#define _DT_BINDINGS_CLK_GCC_IPQ806X_H
+
+#define AFAB_CLK_SRC 0
+#define QDSS_STM_CLK 1
+#define SCSS_A_CLK 2
+#define SCSS_H_CLK 3
+#define AFAB_CORE_CLK 4
+#define SCSS_XO_SRC_CLK 5
+#define AFAB_EBI1_CH0_A_CLK 6
+#define AFAB_EBI1_CH1_A_CLK 7
+#define AFAB_AXI_S0_FCLK 8
+#define AFAB_AXI_S1_FCLK 9
+#define AFAB_AXI_S2_FCLK 10
+#define AFAB_AXI_S3_FCLK 11
+#define AFAB_AXI_S4_FCLK 12
+#define SFAB_CORE_CLK 13
+#define SFAB_AXI_S0_FCLK 14
+#define SFAB_AXI_S1_FCLK 15
+#define SFAB_AXI_S2_FCLK 16
+#define SFAB_AXI_S3_FCLK 17
+#define SFAB_AXI_S4_FCLK 18
+#define SFAB_AXI_S5_FCLK 19
+#define SFAB_AHB_S0_FCLK 20
+#define SFAB_AHB_S1_FCLK 21
+#define SFAB_AHB_S2_FCLK 22
+#define SFAB_AHB_S3_FCLK 23
+#define SFAB_AHB_S4_FCLK 24
+#define SFAB_AHB_S5_FCLK 25
+#define SFAB_AHB_S6_FCLK 26
+#define SFAB_AHB_S7_FCLK 27
+#define QDSS_AT_CLK_SRC 28
+#define QDSS_AT_CLK 29
+#define QDSS_TRACECLKIN_CLK_SRC 30
+#define QDSS_TRACECLKIN_CLK 31
+#define QDSS_TSCTR_CLK_SRC 32
+#define QDSS_TSCTR_CLK 33
+#define SFAB_ADM0_M0_A_CLK 34
+#define SFAB_ADM0_M1_A_CLK 35
+#define SFAB_ADM0_M2_H_CLK 36
+#define ADM0_CLK 37
+#define ADM0_PBUS_CLK 38
+#define IMEM0_A_CLK 39
+#define QDSS_H_CLK 40
+#define PCIE_A_CLK 41
+#define PCIE_AUX_CLK 42
+#define PCIE_H_CLK 43
+#define PCIE_PHY_CLK 44
+#define SFAB_CLK_SRC 45
+#define SFAB_LPASS_Q6_A_CLK 46
+#define SFAB_AFAB_M_A_CLK 47
+#define AFAB_SFAB_M0_A_CLK 48
+#define AFAB_SFAB_M1_A_CLK 49
+#define SFAB_SATA_S_H_CLK 50
+#define DFAB_CLK_SRC 51
+#define DFAB_CLK 52
+#define SFAB_DFAB_M_A_CLK 53
+#define DFAB_SFAB_M_A_CLK 54
+#define DFAB_SWAY0_H_CLK 55
+#define DFAB_SWAY1_H_CLK 56
+#define DFAB_ARB0_H_CLK 57
+#define DFAB_ARB1_H_CLK 58
+#define PPSS_H_CLK 59
+#define PPSS_PROC_CLK 60
+#define PPSS_TIMER0_CLK 61
+#define PPSS_TIMER1_CLK 62
+#define PMEM_A_CLK 63
+#define DMA_BAM_H_CLK 64
+#define SIC_H_CLK 65
+#define SPS_TIC_H_CLK 66
+#define CFPB_2X_CLK_SRC 67
+#define CFPB_CLK 68
+#define CFPB0_H_CLK 69
+#define CFPB1_H_CLK 70
+#define CFPB2_H_CLK 71
+#define SFAB_CFPB_M_H_CLK 72
+#define CFPB_MASTER_H_CLK 73
+#define SFAB_CFPB_S_H_CLK 74
+#define CFPB_SPLITTER_H_CLK 75
+#define TSIF_H_CLK 76
+#define TSIF_INACTIVITY_TIMERS_CLK 77
+#define TSIF_REF_SRC 78
+#define TSIF_REF_CLK 79
+#define CE1_H_CLK 80
+#define CE1_CORE_CLK 81
+#define CE1_SLEEP_CLK 82
+#define CE2_H_CLK 83
+#define CE2_CORE_CLK 84
+#define SFPB_H_CLK_SRC 85
+#define SFPB_H_CLK 86
+#define SFAB_SFPB_M_H_CLK 87
+#define SFAB_SFPB_S_H_CLK 88
+#define RPM_PROC_CLK 89
+#define RPM_BUS_H_CLK 90
+#define RPM_SLEEP_CLK 91
+#define RPM_TIMER_CLK 92
+#define RPM_MSG_RAM_H_CLK 93
+#define PMIC_ARB0_H_CLK 94
+#define PMIC_ARB1_H_CLK 95
+#define PMIC_SSBI2_SRC 96
+#define PMIC_SSBI2_CLK 97
+#define SDC1_H_CLK 98
+#define SDC2_H_CLK 99
+#define SDC3_H_CLK 100
+#define SDC4_H_CLK 101
+#define SDC1_SRC 102
+#define SDC1_CLK 103
+#define SDC2_SRC 104
+#define SDC2_CLK 105
+#define SDC3_SRC 106
+#define SDC3_CLK 107
+#define SDC4_SRC 108
+#define SDC4_CLK 109
+#define USB_HS1_H_CLK 110
+#define USB_HS1_XCVR_SRC 111
+#define USB_HS1_XCVR_CLK 112
+#define USB_HSIC_H_CLK 113
+#define USB_HSIC_XCVR_SRC 114
+#define USB_HSIC_XCVR_CLK 115
+#define USB_HSIC_SYSTEM_CLK_SRC 116
+#define USB_HSIC_SYSTEM_CLK 117
+#define CFPB0_C0_H_CLK 118
+#define CFPB0_D0_H_CLK 119
+#define CFPB0_C1_H_CLK 120
+#define CFPB0_D1_H_CLK 121
+#define USB_FS1_H_CLK 122
+#define USB_FS1_XCVR_SRC 123
+#define USB_FS1_XCVR_CLK 124
+#define USB_FS1_SYSTEM_CLK 125
+#define GSBI_COMMON_SIM_SRC 126
+#define GSBI1_H_CLK 127
+#define GSBI2_H_CLK 128
+#define GSBI3_H_CLK 129
+#define GSBI4_H_CLK 130
+#define GSBI5_H_CLK 131
+#define GSBI6_H_CLK 132
+#define GSBI7_H_CLK 133
+#define GSBI1_QUP_SRC 134
+#define GSBI1_QUP_CLK 135
+#define GSBI2_QUP_SRC 136
+#define GSBI2_QUP_CLK 137
+#define GSBI3_QUP_SRC 138
+#define GSBI3_QUP_CLK 139
+#define GSBI4_QUP_SRC 140
+#define GSBI4_QUP_CLK 141
+#define GSBI5_QUP_SRC 142
+#define GSBI5_QUP_CLK 143
+#define GSBI6_QUP_SRC 144
+#define GSBI6_QUP_CLK 145
+#define GSBI7_QUP_SRC 146
+#define GSBI7_QUP_CLK 147
+#define GSBI1_UART_SRC 148
+#define GSBI1_UART_CLK 149
+#define GSBI2_UART_SRC 150
+#define GSBI2_UART_CLK 151
+#define GSBI3_UART_SRC 152
+#define GSBI3_UART_CLK 153
+#define GSBI4_UART_SRC 154
+#define GSBI4_UART_CLK 155
+#define GSBI5_UART_SRC 156
+#define GSBI5_UART_CLK 157
+#define GSBI6_UART_SRC 158
+#define GSBI6_UART_CLK 159
+#define GSBI7_UART_SRC 160
+#define GSBI7_UART_CLK 161
+#define GSBI1_SIM_CLK 162
+#define GSBI2_SIM_CLK 163
+#define GSBI3_SIM_CLK 164
+#define GSBI4_SIM_CLK 165
+#define GSBI5_SIM_CLK 166
+#define GSBI6_SIM_CLK 167
+#define GSBI7_SIM_CLK 168
+#define USB_HSIC_HSIC_CLK_SRC 169
+#define USB_HSIC_HSIC_CLK 170
+#define USB_HSIC_HSIO_CAL_CLK 171
+#define SPDM_CFG_H_CLK 172
+#define SPDM_MSTR_H_CLK 173
+#define SPDM_FF_CLK_SRC 174
+#define SPDM_FF_CLK 175
+#define SEC_CTRL_CLK 176
+#define SEC_CTRL_ACC_CLK_SRC 177
+#define SEC_CTRL_ACC_CLK 178
+#define TLMM_H_CLK 179
+#define TLMM_CLK 180
+#define SATA_H_CLK 181
+#define SATA_CLK_SRC 182
+#define SATA_RXOOB_CLK 183
+#define SATA_PMALIVE_CLK 184
+#define SATA_PHY_REF_CLK 185
+#define SATA_A_CLK 186
+#define SATA_PHY_CFG_CLK 187
+#define TSSC_CLK_SRC 188
+#define TSSC_CLK 189
+#define PDM_SRC 190
+#define PDM_CLK 191
+#define GP0_SRC 192
+#define GP0_CLK 193
+#define GP1_SRC 194
+#define GP1_CLK 195
+#define GP2_SRC 196
+#define GP2_CLK 197
+#define MPM_CLK 198
+#define EBI1_CLK_SRC 199
+#define EBI1_CH0_CLK 200
+#define EBI1_CH1_CLK 201
+#define EBI1_2X_CLK 202
+#define EBI1_CH0_DQ_CLK 203
+#define EBI1_CH1_DQ_CLK 204
+#define EBI1_CH0_CA_CLK 205
+#define EBI1_CH1_CA_CLK 206
+#define EBI1_XO_CLK 207
+#define SFAB_SMPSS_S_H_CLK 208
+#define PRNG_SRC 209
+#define PRNG_CLK 210
+#define PXO_SRC 211
+#define SPDM_CY_PORT0_CLK 212
+#define SPDM_CY_PORT1_CLK 213
+#define SPDM_CY_PORT2_CLK 214
+#define SPDM_CY_PORT3_CLK 215
+#define SPDM_CY_PORT4_CLK 216
+#define SPDM_CY_PORT5_CLK 217
+#define SPDM_CY_PORT6_CLK 218
+#define SPDM_CY_PORT7_CLK 219
+#define PLL0 220
+#define PLL0_VOTE 221
+#define PLL3 222
+#define PLL3_VOTE 223
+#define PLL4 224
+#define PLL4_VOTE 225
+#define PLL8 226
+#define PLL8_VOTE 227
+#define PLL9 228
+#define PLL10 229
+#define PLL11 230
+#define PLL12 231
+#define PLL14 232
+#define PLL14_VOTE 233
+#define PLL18 234
+#define CE5_SRC 235
+#define CE5_H_CLK 236
+#define CE5_CORE_CLK 237
+#define CE3_SLEEP_CLK 238
+#define SFAB_AHB_S8_FCLK 239
+#define SPDM_CY_PORT8_CLK 246
+#define PCIE_ALT_REF_SRC 247
+#define PCIE_ALT_REF_CLK 248
+#define PCIE_1_A_CLK 249
+#define PCIE_1_AUX_CLK 250
+#define PCIE_1_H_CLK 251
+#define PCIE_1_PHY_CLK 252
+#define PCIE_1_ALT_REF_SRC 253
+#define PCIE_1_ALT_REF_CLK 254
+#define PCIE_2_A_CLK 255
+#define PCIE_2_AUX_CLK 256
+#define PCIE_2_H_CLK 257
+#define PCIE_2_PHY_CLK 258
+#define PCIE_2_ALT_REF_SRC 259
+#define PCIE_2_ALT_REF_CLK 260
+#define EBI2_CLK 261
+#define USB30_SLEEP_CLK 262
+#define USB30_UTMI_SRC 263
+#define USB30_0_UTMI_CLK 264
+#define USB30_1_UTMI_CLK 265
+#define USB30_MASTER_SRC 266
+#define USB30_0_MASTER_CLK 267
+#define USB30_1_MASTER_CLK 268
+#define GMAC_CORE1_CLK_SRC 269
+#define GMAC_CORE2_CLK_SRC 270
+#define GMAC_CORE3_CLK_SRC 271
+#define GMAC_CORE4_CLK_SRC 272
+#define GMAC_CORE1_CLK 273
+#define GMAC_CORE2_CLK 274
+#define GMAC_CORE3_CLK 275
+#define GMAC_CORE4_CLK 276
+#define UBI32_CORE1_CLK_SRC 277
+#define UBI32_CORE2_CLK_SRC 278
+#define UBI32_CORE1_CLK 279
+#define UBI32_CORE2_CLK 280
+
+#endif
diff --git a/dts/include/dt-bindings/clock/qcom,gcc-msm8960.h b/dts/include/dt-bindings/clock/qcom,gcc-msm8960.h
index f9f547146a..7d20eedfee 100644
--- a/dts/include/dt-bindings/clock/qcom,gcc-msm8960.h
+++ b/dts/include/dt-bindings/clock/qcom,gcc-msm8960.h
@@ -308,5 +308,16 @@
#define PLL13 292
#define PLL14 293
#define PLL14_VOTE 294
+#define USB_HS3_H_CLK 295
+#define USB_HS3_XCVR_SRC 296
+#define USB_HS3_XCVR_CLK 297
+#define USB_HS4_H_CLK 298
+#define USB_HS4_XCVR_SRC 299
+#define USB_HS4_XCVR_CLK 300
+#define SATA_PHY_CFG_CLK 301
+#define SATA_A_CLK 302
+#define CE3_SRC 303
+#define CE3_CORE_CLK 304
+#define CE3_H_CLK 305
#endif
diff --git a/dts/include/dt-bindings/clock/qcom,mmcc-apq8084.h b/dts/include/dt-bindings/clock/qcom,mmcc-apq8084.h
new file mode 100644
index 0000000000..a929f86d0d
--- /dev/null
+++ b/dts/include/dt-bindings/clock/qcom,mmcc-apq8084.h
@@ -0,0 +1,183 @@
+/*
+ * Copyright (c) 2014, The Linux Foundation. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _DT_BINDINGS_CLK_APQ_MMCC_8084_H
+#define _DT_BINDINGS_CLK_APQ_MMCC_8084_H
+
+#define MMSS_AHB_CLK_SRC 0
+#define MMSS_AXI_CLK_SRC 1
+#define MMPLL0 2
+#define MMPLL0_VOTE 3
+#define MMPLL1 4
+#define MMPLL1_VOTE 5
+#define MMPLL2 6
+#define MMPLL3 7
+#define MMPLL4 8
+#define CSI0_CLK_SRC 9
+#define CSI1_CLK_SRC 10
+#define CSI2_CLK_SRC 11
+#define CSI3_CLK_SRC 12
+#define VCODEC0_CLK_SRC 13
+#define VFE0_CLK_SRC 14
+#define VFE1_CLK_SRC 15
+#define MDP_CLK_SRC 16
+#define PCLK0_CLK_SRC 17
+#define PCLK1_CLK_SRC 18
+#define OCMEMNOC_CLK_SRC 19
+#define GFX3D_CLK_SRC 20
+#define JPEG0_CLK_SRC 21
+#define JPEG1_CLK_SRC 22
+#define JPEG2_CLK_SRC 23
+#define EDPPIXEL_CLK_SRC 24
+#define EXTPCLK_CLK_SRC 25
+#define VP_CLK_SRC 26
+#define CCI_CLK_SRC 27
+#define CAMSS_GP0_CLK_SRC 28
+#define CAMSS_GP1_CLK_SRC 29
+#define MCLK0_CLK_SRC 30
+#define MCLK1_CLK_SRC 31
+#define MCLK2_CLK_SRC 32
+#define MCLK3_CLK_SRC 33
+#define CSI0PHYTIMER_CLK_SRC 34
+#define CSI1PHYTIMER_CLK_SRC 35
+#define CSI2PHYTIMER_CLK_SRC 36
+#define CPP_CLK_SRC 37
+#define BYTE0_CLK_SRC 38
+#define BYTE1_CLK_SRC 39
+#define EDPAUX_CLK_SRC 40
+#define EDPLINK_CLK_SRC 41
+#define ESC0_CLK_SRC 42
+#define ESC1_CLK_SRC 43
+#define HDMI_CLK_SRC 44
+#define VSYNC_CLK_SRC 45
+#define RBCPR_CLK_SRC 46
+#define RBBMTIMER_CLK_SRC 47
+#define MAPLE_CLK_SRC 48
+#define VDP_CLK_SRC 49
+#define VPU_BUS_CLK_SRC 50
+#define MMSS_CXO_CLK 51
+#define MMSS_SLEEPCLK_CLK 52
+#define AVSYNC_AHB_CLK 53
+#define AVSYNC_EDPPIXEL_CLK 54
+#define AVSYNC_EXTPCLK_CLK 55
+#define AVSYNC_PCLK0_CLK 56
+#define AVSYNC_PCLK1_CLK 57
+#define AVSYNC_VP_CLK 58
+#define CAMSS_AHB_CLK 59
+#define CAMSS_CCI_CCI_AHB_CLK 60
+#define CAMSS_CCI_CCI_CLK 61
+#define CAMSS_CSI0_AHB_CLK 62
+#define CAMSS_CSI0_CLK 63
+#define CAMSS_CSI0PHY_CLK 64
+#define CAMSS_CSI0PIX_CLK 65
+#define CAMSS_CSI0RDI_CLK 66
+#define CAMSS_CSI1_AHB_CLK 67
+#define CAMSS_CSI1_CLK 68
+#define CAMSS_CSI1PHY_CLK 69
+#define CAMSS_CSI1PIX_CLK 70
+#define CAMSS_CSI1RDI_CLK 71
+#define CAMSS_CSI2_AHB_CLK 72
+#define CAMSS_CSI2_CLK 73
+#define CAMSS_CSI2PHY_CLK 74
+#define CAMSS_CSI2PIX_CLK 75
+#define CAMSS_CSI2RDI_CLK 76
+#define CAMSS_CSI3_AHB_CLK 77
+#define CAMSS_CSI3_CLK 78
+#define CAMSS_CSI3PHY_CLK 79
+#define CAMSS_CSI3PIX_CLK 80
+#define CAMSS_CSI3RDI_CLK 81
+#define CAMSS_CSI_VFE0_CLK 82
+#define CAMSS_CSI_VFE1_CLK 83
+#define CAMSS_GP0_CLK 84
+#define CAMSS_GP1_CLK 85
+#define CAMSS_ISPIF_AHB_CLK 86
+#define CAMSS_JPEG_JPEG0_CLK 87
+#define CAMSS_JPEG_JPEG1_CLK 88
+#define CAMSS_JPEG_JPEG2_CLK 89
+#define CAMSS_JPEG_JPEG_AHB_CLK 90
+#define CAMSS_JPEG_JPEG_AXI_CLK 91
+#define CAMSS_MCLK0_CLK 92
+#define CAMSS_MCLK1_CLK 93
+#define CAMSS_MCLK2_CLK 94
+#define CAMSS_MCLK3_CLK 95
+#define CAMSS_MICRO_AHB_CLK 96
+#define CAMSS_PHY0_CSI0PHYTIMER_CLK 97
+#define CAMSS_PHY1_CSI1PHYTIMER_CLK 98
+#define CAMSS_PHY2_CSI2PHYTIMER_CLK 99
+#define CAMSS_TOP_AHB_CLK 100
+#define CAMSS_VFE_CPP_AHB_CLK 101
+#define CAMSS_VFE_CPP_CLK 102
+#define CAMSS_VFE_VFE0_CLK 103
+#define CAMSS_VFE_VFE1_CLK 104
+#define CAMSS_VFE_VFE_AHB_CLK 105
+#define CAMSS_VFE_VFE_AXI_CLK 106
+#define MDSS_AHB_CLK 107
+#define MDSS_AXI_CLK 108
+#define MDSS_BYTE0_CLK 109
+#define MDSS_BYTE1_CLK 110
+#define MDSS_EDPAUX_CLK 111
+#define MDSS_EDPLINK_CLK 112
+#define MDSS_EDPPIXEL_CLK 113
+#define MDSS_ESC0_CLK 114
+#define MDSS_ESC1_CLK 115
+#define MDSS_EXTPCLK_CLK 116
+#define MDSS_HDMI_AHB_CLK 117
+#define MDSS_HDMI_CLK 118
+#define MDSS_MDP_CLK 119
+#define MDSS_MDP_LUT_CLK 120
+#define MDSS_PCLK0_CLK 121
+#define MDSS_PCLK1_CLK 122
+#define MDSS_VSYNC_CLK 123
+#define MMSS_RBCPR_AHB_CLK 124
+#define MMSS_RBCPR_CLK 125
+#define MMSS_SPDM_AHB_CLK 126
+#define MMSS_SPDM_AXI_CLK 127
+#define MMSS_SPDM_CSI0_CLK 128
+#define MMSS_SPDM_GFX3D_CLK 129
+#define MMSS_SPDM_JPEG0_CLK 130
+#define MMSS_SPDM_JPEG1_CLK 131
+#define MMSS_SPDM_JPEG2_CLK 132
+#define MMSS_SPDM_MDP_CLK 133
+#define MMSS_SPDM_PCLK0_CLK 134
+#define MMSS_SPDM_PCLK1_CLK 135
+#define MMSS_SPDM_VCODEC0_CLK 136
+#define MMSS_SPDM_VFE0_CLK 137
+#define MMSS_SPDM_VFE1_CLK 138
+#define MMSS_SPDM_RM_AXI_CLK 139
+#define MMSS_SPDM_RM_OCMEMNOC_CLK 140
+#define MMSS_MISC_AHB_CLK 141
+#define MMSS_MMSSNOC_AHB_CLK 142
+#define MMSS_MMSSNOC_BTO_AHB_CLK 143
+#define MMSS_MMSSNOC_AXI_CLK 144
+#define MMSS_S0_AXI_CLK 145
+#define OCMEMCX_AHB_CLK 146
+#define OCMEMCX_OCMEMNOC_CLK 147
+#define OXILI_OCMEMGX_CLK 148
+#define OXILI_GFX3D_CLK 149
+#define OXILI_RBBMTIMER_CLK 150
+#define OXILICX_AHB_CLK 151
+#define VENUS0_AHB_CLK 152
+#define VENUS0_AXI_CLK 153
+#define VENUS0_CORE0_VCODEC_CLK 154
+#define VENUS0_CORE1_VCODEC_CLK 155
+#define VENUS0_OCMEMNOC_CLK 156
+#define VENUS0_VCODEC0_CLK 157
+#define VPU_AHB_CLK 158
+#define VPU_AXI_CLK 159
+#define VPU_BUS_CLK 160
+#define VPU_CXO_CLK 161
+#define VPU_MAPLE_CLK 162
+#define VPU_SLEEP_CLK 163
+#define VPU_VDP_CLK 164
+
+#endif
diff --git a/dts/include/dt-bindings/clock/qcom,mmcc-msm8960.h b/dts/include/dt-bindings/clock/qcom,mmcc-msm8960.h
index 5868ef14a7..85041b28f9 100644
--- a/dts/include/dt-bindings/clock/qcom,mmcc-msm8960.h
+++ b/dts/include/dt-bindings/clock/qcom,mmcc-msm8960.h
@@ -133,5 +133,13 @@
#define CSIPHY0_TIMER_CLK 116
#define PLL1 117
#define PLL2 118
+#define RGB_TV_CLK 119
+#define NPL_TV_CLK 120
+#define VCAP_AHB_CLK 121
+#define VCAP_AXI_CLK 122
+#define VCAP_SRC 123
+#define VCAP_CLK 124
+#define VCAP_NPL_CLK 125
+#define PLL15 126
#endif
diff --git a/dts/include/dt-bindings/clock/r8a7790-clock.h b/dts/include/dt-bindings/clock/r8a7790-clock.h
index 1118f7a4bc..f929a79e69 100644
--- a/dts/include/dt-bindings/clock/r8a7790-clock.h
+++ b/dts/include/dt-bindings/clock/r8a7790-clock.h
@@ -59,6 +59,7 @@
#define R8A7790_CLK_SDHI0 14
#define R8A7790_CLK_MMCIF0 15
#define R8A7790_CLK_IIC0 18
+#define R8A7790_CLK_PCIEC 19
#define R8A7790_CLK_IIC1 23
#define R8A7790_CLK_SSUSB 28
#define R8A7790_CLK_CMT1 29
@@ -107,4 +108,30 @@
#define R8A7790_CLK_I2C1 30
#define R8A7790_CLK_I2C0 31
+/* MSTP10 */
+#define R8A7790_CLK_SSI_ALL 5
+#define R8A7790_CLK_SSI9 6
+#define R8A7790_CLK_SSI8 7
+#define R8A7790_CLK_SSI7 8
+#define R8A7790_CLK_SSI6 9
+#define R8A7790_CLK_SSI5 10
+#define R8A7790_CLK_SSI4 11
+#define R8A7790_CLK_SSI3 12
+#define R8A7790_CLK_SSI2 13
+#define R8A7790_CLK_SSI1 14
+#define R8A7790_CLK_SSI0 15
+#define R8A7790_CLK_SCU_ALL 17
+#define R8A7790_CLK_SCU_DVC1 18
+#define R8A7790_CLK_SCU_DVC0 19
+#define R8A7790_CLK_SCU_SRC9 22
+#define R8A7790_CLK_SCU_SRC8 23
+#define R8A7790_CLK_SCU_SRC7 24
+#define R8A7790_CLK_SCU_SRC6 25
+#define R8A7790_CLK_SCU_SRC5 26
+#define R8A7790_CLK_SCU_SRC4 27
+#define R8A7790_CLK_SCU_SRC3 28
+#define R8A7790_CLK_SCU_SRC2 29
+#define R8A7790_CLK_SCU_SRC1 30
+#define R8A7790_CLK_SCU_SRC0 31
+
#endif /* __DT_BINDINGS_CLOCK_R8A7790_H__ */
diff --git a/dts/include/dt-bindings/clock/r8a7791-clock.h b/dts/include/dt-bindings/clock/r8a7791-clock.h
index b050d18437..f0d4d10491 100644
--- a/dts/include/dt-bindings/clock/r8a7791-clock.h
+++ b/dts/include/dt-bindings/clock/r8a7791-clock.h
@@ -53,6 +53,7 @@
#define R8A7791_CLK_SDHI0 14
#define R8A7791_CLK_MMCIF0 15
#define R8A7791_CLK_IIC0 18
+#define R8A7791_CLK_PCIEC 19
#define R8A7791_CLK_IIC1 23
#define R8A7791_CLK_SSUSB 28
#define R8A7791_CLK_CMT1 29
@@ -107,6 +108,32 @@
#define R8A7791_CLK_I2C1 30
#define R8A7791_CLK_I2C0 31
+/* MSTP10 */
+#define R8A7791_CLK_SSI_ALL 5
+#define R8A7791_CLK_SSI9 6
+#define R8A7791_CLK_SSI8 7
+#define R8A7791_CLK_SSI7 8
+#define R8A7791_CLK_SSI6 9
+#define R8A7791_CLK_SSI5 10
+#define R8A7791_CLK_SSI4 11
+#define R8A7791_CLK_SSI3 12
+#define R8A7791_CLK_SSI2 13
+#define R8A7791_CLK_SSI1 14
+#define R8A7791_CLK_SSI0 15
+#define R8A7791_CLK_SCU_ALL 17
+#define R8A7791_CLK_SCU_DVC1 18
+#define R8A7791_CLK_SCU_DVC0 19
+#define R8A7791_CLK_SCU_SRC9 22
+#define R8A7791_CLK_SCU_SRC8 23
+#define R8A7791_CLK_SCU_SRC7 24
+#define R8A7791_CLK_SCU_SRC6 25
+#define R8A7791_CLK_SCU_SRC5 26
+#define R8A7791_CLK_SCU_SRC4 27
+#define R8A7791_CLK_SCU_SRC3 28
+#define R8A7791_CLK_SCU_SRC2 29
+#define R8A7791_CLK_SCU_SRC1 30
+#define R8A7791_CLK_SCU_SRC0 31
+
/* MSTP11 */
#define R8A7791_CLK_SCIFA3 6
#define R8A7791_CLK_SCIFA4 7
diff --git a/dts/include/dt-bindings/clock/rk3066a-cru.h b/dts/include/dt-bindings/clock/rk3066a-cru.h
new file mode 100644
index 0000000000..bc1ed1dbd8
--- /dev/null
+++ b/dts/include/dt-bindings/clock/rk3066a-cru.h
@@ -0,0 +1,35 @@
+/*
+ * Copyright (c) 2014 MundoReader S.L.
+ * Author: Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <dt-bindings/clock/rk3188-cru-common.h>
+
+/* soft-reset indices */
+#define SRST_SRST1 0
+#define SRST_SRST2 1
+
+#define SRST_L2MEM 18
+#define SRST_I2S0 23
+#define SRST_I2S1 24
+#define SRST_I2S2 25
+#define SRST_TIMER2 29
+
+#define SRST_GPIO4 36
+#define SRST_GPIO6 38
+
+#define SRST_TSADC 92
+
+#define SRST_HDMI 96
+#define SRST_HDMI_APB 97
+#define SRST_CIF1 111
diff --git a/dts/include/dt-bindings/clock/rk3188-cru-common.h b/dts/include/dt-bindings/clock/rk3188-cru-common.h
new file mode 100644
index 0000000000..750ee60e75
--- /dev/null
+++ b/dts/include/dt-bindings/clock/rk3188-cru-common.h
@@ -0,0 +1,249 @@
+/*
+ * Copyright (c) 2014 MundoReader S.L.
+ * Author: Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/* core clocks from */
+#define PLL_APLL 1
+#define PLL_DPLL 2
+#define PLL_CPLL 3
+#define PLL_GPLL 4
+#define CORE_PERI 5
+#define CORE_L2C 6
+
+/* sclk gates (special clocks) */
+#define SCLK_UART0 64
+#define SCLK_UART1 65
+#define SCLK_UART2 66
+#define SCLK_UART3 67
+#define SCLK_MAC 68
+#define SCLK_SPI0 69
+#define SCLK_SPI1 70
+#define SCLK_SARADC 71
+#define SCLK_SDMMC 72
+#define SCLK_SDIO 73
+#define SCLK_EMMC 74
+#define SCLK_I2S0 75
+#define SCLK_I2S1 76
+#define SCLK_I2S2 77
+#define SCLK_SPDIF 78
+#define SCLK_CIF0 79
+#define SCLK_CIF1 80
+#define SCLK_OTGPHY0 81
+#define SCLK_OTGPHY1 82
+#define SCLK_HSADC 83
+#define SCLK_TIMER0 84
+#define SCLK_TIMER1 85
+#define SCLK_TIMER2 86
+#define SCLK_TIMER3 87
+#define SCLK_TIMER4 88
+#define SCLK_TIMER5 89
+#define SCLK_TIMER6 90
+#define SCLK_JTAG 91
+#define SCLK_SMC 92
+
+#define DCLK_LCDC0 190
+#define DCLK_LCDC1 191
+
+/* aclk gates */
+#define ACLK_DMA1 192
+#define ACLK_DMA2 193
+#define ACLK_GPS 194
+#define ACLK_LCDC0 195
+#define ACLK_LCDC1 196
+#define ACLK_GPU 197
+#define ACLK_SMC 198
+#define ACLK_CIF 199
+#define ACLK_IPP 200
+#define ACLK_RGA 201
+#define ACLK_CIF0 202
+
+/* pclk gates */
+#define PCLK_GRF 320
+#define PCLK_PMU 321
+#define PCLK_TIMER0 322
+#define PCLK_TIMER1 323
+#define PCLK_TIMER2 324
+#define PCLK_TIMER3 325
+#define PCLK_PWM01 326
+#define PCLK_PWM23 327
+#define PCLK_SPI0 328
+#define PCLK_SPI1 329
+#define PCLK_SARADC 330
+#define PCLK_WDT 331
+#define PCLK_UART0 332
+#define PCLK_UART1 333
+#define PCLK_UART2 334
+#define PCLK_UART3 335
+#define PCLK_I2C0 336
+#define PCLK_I2C1 337
+#define PCLK_I2C2 338
+#define PCLK_I2C3 339
+#define PCLK_I2C4 340
+#define PCLK_GPIO0 341
+#define PCLK_GPIO1 342
+#define PCLK_GPIO2 343
+#define PCLK_GPIO3 344
+#define PCLK_GPIO4 345
+#define PCLK_GPIO6 346
+#define PCLK_EFUSE 347
+#define PCLK_TZPC 348
+#define PCLK_TSADC 349
+
+/* hclk gates */
+#define HCLK_SDMMC 448
+#define HCLK_SDIO 449
+#define HCLK_EMMC 450
+#define HCLK_OTG0 451
+#define HCLK_EMAC 452
+#define HCLK_SPDIF 453
+#define HCLK_I2S0 454
+#define HCLK_I2S1 455
+#define HCLK_I2S2 456
+#define HCLK_OTG1 457
+#define HCLK_HSIC 458
+#define HCLK_HSADC 459
+#define HCLK_PIDF 460
+#define HCLK_LCDC0 461
+#define HCLK_LCDC1 462
+#define HCLK_ROM 463
+#define HCLK_CIF0 464
+#define HCLK_IPP 465
+#define HCLK_RGA 466
+#define HCLK_NANDC0 467
+
+#define CLK_NR_CLKS (HCLK_NANDC0 + 1)
+
+/* soft-reset indices */
+#define SRST_MCORE 2
+#define SRST_CORE0 3
+#define SRST_CORE1 4
+#define SRST_MCORE_DBG 7
+#define SRST_CORE0_DBG 8
+#define SRST_CORE1_DBG 9
+#define SRST_CORE0_WDT 12
+#define SRST_CORE1_WDT 13
+#define SRST_STRC_SYS 14
+#define SRST_L2C 15
+
+#define SRST_CPU_AHB 17
+#define SRST_AHB2APB 19
+#define SRST_DMA1 20
+#define SRST_INTMEM 21
+#define SRST_ROM 22
+#define SRST_SPDIF 26
+#define SRST_TIMER0 27
+#define SRST_TIMER1 28
+#define SRST_EFUSE 30
+
+#define SRST_GPIO0 32
+#define SRST_GPIO1 33
+#define SRST_GPIO2 34
+#define SRST_GPIO3 35
+
+#define SRST_UART0 39
+#define SRST_UART1 40
+#define SRST_UART2 41
+#define SRST_UART3 42
+#define SRST_I2C0 43
+#define SRST_I2C1 44
+#define SRST_I2C2 45
+#define SRST_I2C3 46
+#define SRST_I2C4 47
+
+#define SRST_PWM0 48
+#define SRST_PWM1 49
+#define SRST_DAP_PO 50
+#define SRST_DAP 51
+#define SRST_DAP_SYS 52
+#define SRST_TPIU_ATB 53
+#define SRST_PMU_APB 54
+#define SRST_GRF 55
+#define SRST_PMU 56
+#define SRST_PERI_AXI 57
+#define SRST_PERI_AHB 58
+#define SRST_PERI_APB 59
+#define SRST_PERI_NIU 60
+#define SRST_CPU_PERI 61
+#define SRST_EMEM_PERI 62
+#define SRST_USB_PERI 63
+
+#define SRST_DMA2 64
+#define SRST_SMC 65
+#define SRST_MAC 66
+#define SRST_NANC0 68
+#define SRST_USBOTG0 69
+#define SRST_USBPHY0 70
+#define SRST_OTGC0 71
+#define SRST_USBOTG1 72
+#define SRST_USBPHY1 73
+#define SRST_OTGC1 74
+#define SRST_HSADC 76
+#define SRST_PIDFILTER 77
+#define SRST_DDR_MSCH 79
+
+#define SRST_TZPC 80
+#define SRST_SDMMC 81
+#define SRST_SDIO 82
+#define SRST_EMMC 83
+#define SRST_SPI0 84
+#define SRST_SPI1 85
+#define SRST_WDT 86
+#define SRST_SARADC 87
+#define SRST_DDRPHY 88
+#define SRST_DDRPHY_APB 89
+#define SRST_DDRCTL 90
+#define SRST_DDRCTL_APB 91
+#define SRST_DDRPUB 93
+
+#define SRST_VIO0_AXI 98
+#define SRST_VIO0_AHB 99
+#define SRST_LCDC0_AXI 100
+#define SRST_LCDC0_AHB 101
+#define SRST_LCDC0_DCLK 102
+#define SRST_LCDC1_AXI 103
+#define SRST_LCDC1_AHB 104
+#define SRST_LCDC1_DCLK 105
+#define SRST_IPP_AXI 106
+#define SRST_IPP_AHB 107
+#define SRST_RGA_AXI 108
+#define SRST_RGA_AHB 109
+#define SRST_CIF0 110
+
+#define SRST_VCODEC_AXI 112
+#define SRST_VCODEC_AHB 113
+#define SRST_VIO1_AXI 114
+#define SRST_VCODEC_CPU 115
+#define SRST_VCODEC_NIU 116
+#define SRST_GPU 120
+#define SRST_GPU_NIU 122
+#define SRST_TFUN_ATB 125
+#define SRST_TFUN_APB 126
+#define SRST_CTI4_APB 127
+
+#define SRST_TPIU_APB 128
+#define SRST_TRACE 129
+#define SRST_CORE_DBG 130
+#define SRST_DBG_APB 131
+#define SRST_CTI0 132
+#define SRST_CTI0_APB 133
+#define SRST_CTI1 134
+#define SRST_CTI1_APB 135
+#define SRST_PTM_CORE0 136
+#define SRST_PTM_CORE1 137
+#define SRST_PTM0 138
+#define SRST_PTM0_ATB 139
+#define SRST_PTM1 140
+#define SRST_PTM1_ATB 141
+#define SRST_CTM 142
+#define SRST_TS 143
diff --git a/dts/include/dt-bindings/clock/rk3188-cru.h b/dts/include/dt-bindings/clock/rk3188-cru.h
new file mode 100644
index 0000000000..9fac8edd3f
--- /dev/null
+++ b/dts/include/dt-bindings/clock/rk3188-cru.h
@@ -0,0 +1,51 @@
+/*
+ * Copyright (c) 2014 MundoReader S.L.
+ * Author: Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <dt-bindings/clock/rk3188-cru-common.h>
+
+/* soft-reset indices */
+#define SRST_PTM_CORE2 0
+#define SRST_PTM_CORE3 1
+#define SRST_CORE2 5
+#define SRST_CORE3 6
+#define SRST_CORE2_DBG 10
+#define SRST_CORE3_DBG 11
+
+#define SRST_TIMER2 16
+#define SRST_TIMER4 23
+#define SRST_I2S0 24
+#define SRST_TIMER5 25
+#define SRST_TIMER3 29
+#define SRST_TIMER6 31
+
+#define SRST_PTM3 36
+#define SRST_PTM3_ATB 37
+
+#define SRST_GPS 67
+#define SRST_HSICPHY 75
+#define SRST_TIMER 78
+
+#define SRST_PTM2 92
+#define SRST_CORE2_WDT 94
+#define SRST_CORE3_WDT 95
+
+#define SRST_PTM2_ATB 111
+
+#define SRST_HSIC 117
+#define SRST_CTI2 118
+#define SRST_CTI2_APB 119
+#define SRST_GPU_BRIDGE 121
+#define SRST_CTI3 123
+#define SRST_CTI3_APB 124
diff --git a/dts/include/dt-bindings/clock/rk3288-cru.h b/dts/include/dt-bindings/clock/rk3288-cru.h
new file mode 100644
index 0000000000..ebcb460ea4
--- /dev/null
+++ b/dts/include/dt-bindings/clock/rk3288-cru.h
@@ -0,0 +1,278 @@
+/*
+ * Copyright (c) 2014 MundoReader S.L.
+ * Author: Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/* core clocks */
+#define PLL_APLL 1
+#define PLL_DPLL 2
+#define PLL_CPLL 3
+#define PLL_GPLL 4
+#define PLL_NPLL 5
+
+/* sclk gates (special clocks) */
+#define SCLK_GPU 64
+#define SCLK_SPI0 65
+#define SCLK_SPI1 66
+#define SCLK_SPI2 67
+#define SCLK_SDMMC 68
+#define SCLK_SDIO0 69
+#define SCLK_SDIO1 70
+#define SCLK_EMMC 71
+#define SCLK_TSADC 72
+#define SCLK_SARADC 73
+#define SCLK_PS2C 74
+#define SCLK_NANDC0 75
+#define SCLK_NANDC1 76
+#define SCLK_UART0 77
+#define SCLK_UART1 78
+#define SCLK_UART2 79
+#define SCLK_UART3 80
+#define SCLK_UART4 81
+#define SCLK_I2S0 82
+#define SCLK_SPDIF 83
+#define SCLK_SPDIF8CH 84
+#define SCLK_TIMER0 85
+#define SCLK_TIMER1 86
+#define SCLK_TIMER2 87
+#define SCLK_TIMER3 88
+#define SCLK_TIMER4 89
+#define SCLK_TIMER5 90
+#define SCLK_TIMER6 91
+#define SCLK_HSADC 92
+#define SCLK_OTGPHY0 93
+#define SCLK_OTGPHY1 94
+#define SCLK_OTGPHY2 95
+#define SCLK_OTG_ADP 96
+#define SCLK_HSICPHY480M 97
+#define SCLK_HSICPHY12M 98
+#define SCLK_MACREF 99
+#define SCLK_LCDC_PWM0 100
+#define SCLK_LCDC_PWM1 101
+#define SCLK_MAC_RX 102
+#define SCLK_MAC_TX 103
+
+#define DCLK_VOP0 190
+#define DCLK_VOP1 191
+
+/* aclk gates */
+#define ACLK_GPU 192
+#define ACLK_DMAC1 193
+#define ACLK_DMAC2 194
+#define ACLK_MMU 195
+#define ACLK_GMAC 196
+#define ACLK_VOP0 197
+#define ACLK_VOP1 198
+#define ACLK_CRYPTO 199
+#define ACLK_RGA 200
+
+/* pclk gates */
+#define PCLK_GPIO0 320
+#define PCLK_GPIO1 321
+#define PCLK_GPIO2 322
+#define PCLK_GPIO3 323
+#define PCLK_GPIO4 324
+#define PCLK_GPIO5 325
+#define PCLK_GPIO6 326
+#define PCLK_GPIO7 327
+#define PCLK_GPIO8 328
+#define PCLK_GRF 329
+#define PCLK_SGRF 330
+#define PCLK_PMU 331
+#define PCLK_I2C0 332
+#define PCLK_I2C1 333
+#define PCLK_I2C2 334
+#define PCLK_I2C3 335
+#define PCLK_I2C4 336
+#define PCLK_I2C5 337
+#define PCLK_SPI0 338
+#define PCLK_SPI1 339
+#define PCLK_SPI2 340
+#define PCLK_UART0 341
+#define PCLK_UART1 342
+#define PCLK_UART2 343
+#define PCLK_UART3 344
+#define PCLK_UART4 345
+#define PCLK_TSADC 346
+#define PCLK_SARADC 347
+#define PCLK_SIM 348
+#define PCLK_GMAC 349
+#define PCLK_PWM 350
+#define PCLK_RKPWM 351
+#define PCLK_PS2C 352
+#define PCLK_TIMER 353
+#define PCLK_TZPC 354
+
+/* hclk gates */
+#define HCLK_GPS 448
+#define HCLK_OTG0 449
+#define HCLK_USBHOST0 450
+#define HCLK_USBHOST1 451
+#define HCLK_HSIC 452
+#define HCLK_NANDC0 453
+#define HCLK_NANDC1 454
+#define HCLK_TSP 455
+#define HCLK_SDMMC 456
+#define HCLK_SDIO0 457
+#define HCLK_SDIO1 458
+#define HCLK_EMMC 459
+#define HCLK_HSADC 460
+#define HCLK_CRYPTO 461
+#define HCLK_I2S0 462
+#define HCLK_SPDIF 463
+#define HCLK_SPDIF8CH 464
+#define HCLK_VOP0 465
+#define HCLK_VOP1 466
+#define HCLK_ROM 467
+#define HCLK_IEP 468
+#define HCLK_ISP 469
+#define HCLK_RGA 470
+
+#define CLK_NR_CLKS (HCLK_RGA + 1)
+
+/* soft-reset indices */
+#define SRST_CORE0 0
+#define SRST_CORE1 1
+#define SRST_CORE2 2
+#define SRST_CORE3 3
+#define SRST_CORE0_PO 4
+#define SRST_CORE1_PO 5
+#define SRST_CORE2_PO 6
+#define SRST_CORE3_PO 7
+#define SRST_PDCORE_STRSYS 8
+#define SRST_PDBUS_STRSYS 9
+#define SRST_L2C 10
+#define SRST_TOPDBG 11
+#define SRST_CORE0_DBG 12
+#define SRST_CORE1_DBG 13
+#define SRST_CORE2_DBG 14
+#define SRST_CORE3_DBG 15
+
+#define SRST_PDBUG_AHB_ARBITOR 16
+#define SRST_EFUSE256 17
+#define SRST_DMAC1 18
+#define SRST_INTMEM 19
+#define SRST_ROM 20
+#define SRST_SPDIF8CH 21
+#define SRST_TIMER 22
+#define SRST_I2S0 23
+#define SRST_SPDIF 24
+#define SRST_TIMER0 25
+#define SRST_TIMER1 26
+#define SRST_TIMER2 27
+#define SRST_TIMER3 28
+#define SRST_TIMER4 29
+#define SRST_TIMER5 30
+#define SRST_EFUSE 31
+
+#define SRST_GPIO0 32
+#define SRST_GPIO1 33
+#define SRST_GPIO2 34
+#define SRST_GPIO3 35
+#define SRST_GPIO4 36
+#define SRST_GPIO5 37
+#define SRST_GPIO6 38
+#define SRST_GPIO7 39
+#define SRST_GPIO8 40
+#define SRST_I2C0 42
+#define SRST_I2C1 43
+#define SRST_I2C2 44
+#define SRST_I2C3 45
+#define SRST_I2C4 46
+#define SRST_I2C5 47
+
+#define SRST_DWPWM 48
+#define SRST_MMC_PERI 49
+#define SRST_PERIPH_MMU 50
+#define SRST_DAP 51
+#define SRST_DAP_SYS 52
+#define SRST_TPIU 53
+#define SRST_PMU_APB 54
+#define SRST_GRF 55
+#define SRST_PMU 56
+#define SRST_PERIPH_AXI 57
+#define SRST_PERIPH_AHB 58
+#define SRST_PERIPH_APB 59
+#define SRST_PERIPH_NIU 60
+#define SRST_PDPERI_AHB_ARBI 61
+#define SRST_EMEM 62
+#define SRST_USB_PERI 63
+
+#define SRST_DMAC2 64
+#define SRST_MAC 66
+#define SRST_GPS 67
+#define SRST_RKPWM 69
+#define SRST_CCP 71
+#define SRST_USBHOST0 72
+#define SRST_HSIC 73
+#define SRST_HSIC_AUX 74
+#define SRST_HSIC_PHY 75
+#define SRST_HSADC 76
+#define SRST_NANDC0 77
+#define SRST_NANDC1 78
+
+#define SRST_TZPC 80
+#define SRST_SPI0 83
+#define SRST_SPI1 84
+#define SRST_SPI2 85
+#define SRST_SARADC 87
+#define SRST_PDALIVE_NIU 88
+#define SRST_PDPMU_INTMEM 89
+#define SRST_PDPMU_NIU 90
+#define SRST_SGRF 91
+
+#define SRST_VIO_ARBI 96
+#define SRST_RGA_NIU 97
+#define SRST_VIO0_NIU_AXI 98
+#define SRST_VIO_NIU_AHB 99
+#define SRST_LCDC0_AXI 100
+#define SRST_LCDC0_AHB 101
+#define SRST_LCDC0_DCLK 102
+#define SRST_VIO1_NIU_AXI 103
+#define SRST_VIP 104
+#define SRST_RGA_CORE 105
+#define SRST_IEP_AXI 106
+#define SRST_IEP_AHB 107
+#define SRST_RGA_AXI 108
+#define SRST_RGA_AHB 109
+#define SRST_ISP 110
+#define SRST_EDP 111
+
+#define SRST_VCODEC_AXI 112
+#define SRST_VCODEC_AHB 113
+#define SRST_VIO_H2P 114
+#define SRST_MIPIDSI0 115
+#define SRST_MIPIDSI1 116
+#define SRST_MIPICSI 117
+#define SRST_LVDS_PHY 118
+#define SRST_LVDS_CON 119
+#define SRST_GPU 120
+#define SRST_HDMI 121
+#define SRST_CORE_PVTM 124
+#define SRST_GPU_PVTM 125
+
+#define SRST_MMC0 128
+#define SRST_SDIO0 129
+#define SRST_SDIO1 130
+#define SRST_EMMC 131
+#define SRST_USBOTG_AHB 132
+#define SRST_USBOTG_PHY 133
+#define SRST_USBOTG_CON 134
+#define SRST_USBHOST0_AHB 135
+#define SRST_USBHOST0_PHY 136
+#define SRST_USBHOST0_CON 137
+#define SRST_USBHOST1_AHB 138
+#define SRST_USBHOST1_PHY 139
+#define SRST_USBHOST1_CON 140
+#define SRST_USB_ADP 141
+#define SRST_ACC_EFUSE 142
diff --git a/dts/include/dt-bindings/clock/s5pv210-audss.h b/dts/include/dt-bindings/clock/s5pv210-audss.h
new file mode 100644
index 0000000000..fe57406e24
--- /dev/null
+++ b/dts/include/dt-bindings/clock/s5pv210-audss.h
@@ -0,0 +1,34 @@
+/*
+ * Copyright (c) 2014 Tomasz Figa <tomasz.figa@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This header provides constants for Samsung audio subsystem
+ * clock controller.
+ *
+ * The constants defined in this header are being used in dts
+ * and s5pv210 audss driver.
+ */
+
+#ifndef _DT_BINDINGS_CLOCK_S5PV210_AUDSS_H
+#define _DT_BINDINGS_CLOCK_S5PV210_AUDSS_H
+
+#define CLK_MOUT_AUDSS 0
+#define CLK_MOUT_I2S_A 1
+
+#define CLK_DOUT_AUD_BUS 2
+#define CLK_DOUT_I2S_A 3
+
+#define CLK_I2S 4
+#define CLK_HCLK_I2S 5
+#define CLK_HCLK_UART 6
+#define CLK_HCLK_HWA 7
+#define CLK_HCLK_DMA 8
+#define CLK_HCLK_BUF 9
+#define CLK_HCLK_RP 10
+
+#define AUDSS_MAX_CLKS 11
+
+#endif
diff --git a/dts/include/dt-bindings/clock/s5pv210.h b/dts/include/dt-bindings/clock/s5pv210.h
new file mode 100644
index 0000000000..e88986b7c6
--- /dev/null
+++ b/dts/include/dt-bindings/clock/s5pv210.h
@@ -0,0 +1,239 @@
+/*
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ * Author: Mateusz Krawczuk <m.krawczuk@partner.samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Device Tree binding constants for Samsung S5PV210 clock controller.
+ */
+
+#ifndef _DT_BINDINGS_CLOCK_S5PV210_H
+#define _DT_BINDINGS_CLOCK_S5PV210_H
+
+/* Core clocks. */
+#define FIN_PLL 1
+#define FOUT_APLL 2
+#define FOUT_MPLL 3
+#define FOUT_EPLL 4
+#define FOUT_VPLL 5
+
+/* Muxes. */
+#define MOUT_FLASH 6
+#define MOUT_PSYS 7
+#define MOUT_DSYS 8
+#define MOUT_MSYS 9
+#define MOUT_VPLL 10
+#define MOUT_EPLL 11
+#define MOUT_MPLL 12
+#define MOUT_APLL 13
+#define MOUT_VPLLSRC 14
+#define MOUT_CSIS 15
+#define MOUT_FIMD 16
+#define MOUT_CAM1 17
+#define MOUT_CAM0 18
+#define MOUT_DAC 19
+#define MOUT_MIXER 20
+#define MOUT_HDMI 21
+#define MOUT_G2D 22
+#define MOUT_MFC 23
+#define MOUT_G3D 24
+#define MOUT_FIMC2 25
+#define MOUT_FIMC1 26
+#define MOUT_FIMC0 27
+#define MOUT_UART3 28
+#define MOUT_UART2 29
+#define MOUT_UART1 30
+#define MOUT_UART0 31
+#define MOUT_MMC3 32
+#define MOUT_MMC2 33
+#define MOUT_MMC1 34
+#define MOUT_MMC0 35
+#define MOUT_PWM 36
+#define MOUT_SPI0 37
+#define MOUT_SPI1 38
+#define MOUT_DMC0 39
+#define MOUT_PWI 40
+#define MOUT_HPM 41
+#define MOUT_SPDIF 42
+#define MOUT_AUDIO2 43
+#define MOUT_AUDIO1 44
+#define MOUT_AUDIO0 45
+
+/* Dividers. */
+#define DOUT_PCLKP 46
+#define DOUT_HCLKP 47
+#define DOUT_PCLKD 48
+#define DOUT_HCLKD 49
+#define DOUT_PCLKM 50
+#define DOUT_HCLKM 51
+#define DOUT_A2M 52
+#define DOUT_APLL 53
+#define DOUT_CSIS 54
+#define DOUT_FIMD 55
+#define DOUT_CAM1 56
+#define DOUT_CAM0 57
+#define DOUT_TBLK 58
+#define DOUT_G2D 59
+#define DOUT_MFC 60
+#define DOUT_G3D 61
+#define DOUT_FIMC2 62
+#define DOUT_FIMC1 63
+#define DOUT_FIMC0 64
+#define DOUT_UART3 65
+#define DOUT_UART2 66
+#define DOUT_UART1 67
+#define DOUT_UART0 68
+#define DOUT_MMC3 69
+#define DOUT_MMC2 70
+#define DOUT_MMC1 71
+#define DOUT_MMC0 72
+#define DOUT_PWM 73
+#define DOUT_SPI1 74
+#define DOUT_SPI0 75
+#define DOUT_DMC0 76
+#define DOUT_PWI 77
+#define DOUT_HPM 78
+#define DOUT_COPY 79
+#define DOUT_FLASH 80
+#define DOUT_AUDIO2 81
+#define DOUT_AUDIO1 82
+#define DOUT_AUDIO0 83
+#define DOUT_DPM 84
+#define DOUT_DVSEM 85
+
+/* Gates */
+#define SCLK_FIMC 86
+#define CLK_CSIS 87
+#define CLK_ROTATOR 88
+#define CLK_FIMC2 89
+#define CLK_FIMC1 90
+#define CLK_FIMC0 91
+#define CLK_MFC 92
+#define CLK_G2D 93
+#define CLK_G3D 94
+#define CLK_IMEM 95
+#define CLK_PDMA1 96
+#define CLK_PDMA0 97
+#define CLK_MDMA 98
+#define CLK_DMC1 99
+#define CLK_DMC0 100
+#define CLK_NFCON 101
+#define CLK_SROMC 102
+#define CLK_CFCON 103
+#define CLK_NANDXL 104
+#define CLK_USB_HOST 105
+#define CLK_USB_OTG 106
+#define CLK_HDMI 107
+#define CLK_TVENC 108
+#define CLK_MIXER 109
+#define CLK_VP 110
+#define CLK_DSIM 111
+#define CLK_FIMD 112
+#define CLK_TZIC3 113
+#define CLK_TZIC2 114
+#define CLK_TZIC1 115
+#define CLK_TZIC0 116
+#define CLK_VIC3 117
+#define CLK_VIC2 118
+#define CLK_VIC1 119
+#define CLK_VIC0 120
+#define CLK_TSI 121
+#define CLK_HSMMC3 122
+#define CLK_HSMMC2 123
+#define CLK_HSMMC1 124
+#define CLK_HSMMC0 125
+#define CLK_JTAG 126
+#define CLK_MODEMIF 127
+#define CLK_CORESIGHT 128
+#define CLK_SDM 129
+#define CLK_SECSS 130
+#define CLK_PCM2 131
+#define CLK_PCM1 132
+#define CLK_PCM0 133
+#define CLK_SYSCON 134
+#define CLK_GPIO 135
+#define CLK_TSADC 136
+#define CLK_PWM 137
+#define CLK_WDT 138
+#define CLK_KEYIF 139
+#define CLK_UART3 140
+#define CLK_UART2 141
+#define CLK_UART1 142
+#define CLK_UART0 143
+#define CLK_SYSTIMER 144
+#define CLK_RTC 145
+#define CLK_SPI1 146
+#define CLK_SPI0 147
+#define CLK_I2C_HDMI_PHY 148
+#define CLK_I2C1 149
+#define CLK_I2C2 150
+#define CLK_I2C0 151
+#define CLK_I2S1 152
+#define CLK_I2S2 153
+#define CLK_I2S0 154
+#define CLK_AC97 155
+#define CLK_SPDIF 156
+#define CLK_TZPC3 157
+#define CLK_TZPC2 158
+#define CLK_TZPC1 159
+#define CLK_TZPC0 160
+#define CLK_SECKEY 161
+#define CLK_IEM_APC 162
+#define CLK_IEM_IEC 163
+#define CLK_CHIPID 164
+#define CLK_JPEG 163
+
+/* Special clocks*/
+#define SCLK_PWI 164
+#define SCLK_SPDIF 165
+#define SCLK_AUDIO2 166
+#define SCLK_AUDIO1 167
+#define SCLK_AUDIO0 168
+#define SCLK_PWM 169
+#define SCLK_SPI1 170
+#define SCLK_SPI0 171
+#define SCLK_UART3 172
+#define SCLK_UART2 173
+#define SCLK_UART1 174
+#define SCLK_UART0 175
+#define SCLK_MMC3 176
+#define SCLK_MMC2 177
+#define SCLK_MMC1 178
+#define SCLK_MMC0 179
+#define SCLK_FINVPLL 180
+#define SCLK_CSIS 181
+#define SCLK_FIMD 182
+#define SCLK_CAM1 183
+#define SCLK_CAM0 184
+#define SCLK_DAC 185
+#define SCLK_MIXER 186
+#define SCLK_HDMI 187
+#define SCLK_FIMC2 188
+#define SCLK_FIMC1 189
+#define SCLK_FIMC0 190
+#define SCLK_HDMI27M 191
+#define SCLK_HDMIPHY 192
+#define SCLK_USBPHY0 193
+#define SCLK_USBPHY1 194
+
+/* S5P6442-specific clocks */
+#define MOUT_D0SYNC 195
+#define MOUT_D1SYNC 196
+#define DOUT_MIXER 197
+#define CLK_ETB 198
+#define CLK_ETM 199
+
+/* CLKOUT */
+#define FOUT_APLL_CLKOUT 200
+#define FOUT_MPLL_CLKOUT 201
+#define DOUT_APLL_CLKOUT 202
+#define MOUT_CLKSEL 203
+#define DOUT_CLKOUT 204
+#define MOUT_CLKOUT 205
+
+/* Total number of clocks. */
+#define NR_CLKS 206
+
+#endif /* _DT_BINDINGS_CLOCK_S5PV210_H */
diff --git a/dts/include/dt-bindings/clock/vf610-clock.h b/dts/include/dt-bindings/clock/vf610-clock.h
index a91602951d..00953d9484 100644
--- a/dts/include/dt-bindings/clock/vf610-clock.h
+++ b/dts/include/dt-bindings/clock/vf610-clock.h
@@ -164,6 +164,8 @@
#define VF610_CLK_DMAMUX1 151
#define VF610_CLK_DMAMUX2 152
#define VF610_CLK_DMAMUX3 153
-#define VF610_CLK_END 154
+#define VF610_CLK_FLEXCAN0_EN 154
+#define VF610_CLK_FLEXCAN1_EN 155
+#define VF610_CLK_END 156
#endif /* __DT_BINDINGS_CLOCK_VF610_H */
diff --git a/dts/include/dt-bindings/dma/nbpfaxi.h b/dts/include/dt-bindings/dma/nbpfaxi.h
new file mode 100644
index 0000000000..c1a5b9e0d6
--- /dev/null
+++ b/dts/include/dt-bindings/dma/nbpfaxi.h
@@ -0,0 +1,20 @@
+/*
+ * Copyright (C) 2013-2014 Renesas Electronics Europe Ltd.
+ * Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef DT_BINDINGS_NBPFAXI_H
+#define DT_BINDINGS_NBPFAXI_H
+
+/**
+ * Use "#dma-cells = <2>;" with the second integer defining slave DMA flags:
+ */
+#define NBPF_SLAVE_RQ_HIGH 1
+#define NBPF_SLAVE_RQ_LOW 2
+#define NBPF_SLAVE_RQ_LEVEL 4
+
+#endif
diff --git a/dts/include/dt-bindings/mfd/as3722.h b/dts/include/dt-bindings/mfd/as3722.h
index 0e692562d7..e66c0898c5 100644
--- a/dts/include/dt-bindings/mfd/as3722.h
+++ b/dts/include/dt-bindings/mfd/as3722.h
@@ -13,7 +13,7 @@
/* External control pins */
#define AS3722_EXT_CONTROL_PIN_ENABLE1 1
#define AS3722_EXT_CONTROL_PIN_ENABLE2 2
-#define AS3722_EXT_CONTROL_PIN_ENABLE2 3
+#define AS3722_EXT_CONTROL_PIN_ENABLE3 3
/* Interrupt numbers for AS3722 */
#define AS3722_IRQ_LID 0
diff --git a/dts/include/dt-bindings/mfd/palmas.h b/dts/include/dt-bindings/mfd/palmas.h
new file mode 100644
index 0000000000..2c8ac48413
--- /dev/null
+++ b/dts/include/dt-bindings/mfd/palmas.h
@@ -0,0 +1,18 @@
+/*
+ * This header provides macros for Palmas device bindings.
+ *
+ * Copyright (c) 2013, NVIDIA Corporation.
+ *
+ * Author: Laxman Dewangan <ldewangan@nvidia.com>
+ *
+ */
+
+#ifndef __DT_BINDINGS_PALMAS_H__
+#define __DT_BINDINGS_PALMAS_H
+
+/* External control pins */
+#define PALMAS_EXT_CONTROL_PIN_ENABLE1 1
+#define PALMAS_EXT_CONTROL_PIN_ENABLE2 2
+#define PALMAS_EXT_CONTROL_PIN_NSLEEP 3
+
+#endif /* __DT_BINDINGS_PALMAS_H */
diff --git a/dts/include/dt-bindings/phy/phy-miphy365x.h b/dts/include/dt-bindings/phy/phy-miphy365x.h
new file mode 100644
index 0000000000..8ef8aba6ed
--- /dev/null
+++ b/dts/include/dt-bindings/phy/phy-miphy365x.h
@@ -0,0 +1,14 @@
+/*
+ * This header provides constants for the phy framework
+ * based on the STMicroelectronics MiPHY365x.
+ *
+ * Author: Lee Jones <lee.jones@linaro.org>
+ */
+#ifndef _DT_BINDINGS_PHY_MIPHY
+#define _DT_BINDINGS_PHY_MIPHY
+
+#define MIPHY_TYPE_SATA 1
+#define MIPHY_TYPE_PCIE 2
+#define MIPHY_TYPE_USB 3
+
+#endif /* _DT_BINDINGS_PHY_MIPHY */
diff --git a/dts/include/dt-bindings/pinctrl/pinctrl-tegra-xusb.h b/dts/include/dt-bindings/pinctrl/pinctrl-tegra-xusb.h
new file mode 100644
index 0000000000..914d56da93
--- /dev/null
+++ b/dts/include/dt-bindings/pinctrl/pinctrl-tegra-xusb.h
@@ -0,0 +1,7 @@
+#ifndef _DT_BINDINGS_PINCTRL_TEGRA_XUSB_H
+#define _DT_BINDINGS_PINCTRL_TEGRA_XUSB_H 1
+
+#define TEGRA_XUSB_PADCTL_PCIE 0
+#define TEGRA_XUSB_PADCTL_SATA 1
+
+#endif /* _DT_BINDINGS_PINCTRL_TEGRA_XUSB_H */
diff --git a/dts/include/dt-bindings/reset/qcom,gcc-apq8084.h b/dts/include/dt-bindings/reset/qcom,gcc-apq8084.h
new file mode 100644
index 0000000000..527caaf48e
--- /dev/null
+++ b/dts/include/dt-bindings/reset/qcom,gcc-apq8084.h
@@ -0,0 +1,109 @@
+/*
+ * Copyright (c) 2014, The Linux Foundation. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _DT_BINDINGS_RESET_APQ_GCC_8084_H
+#define _DT_BINDINGS_RESET_APQ_GCC_8084_H
+
+#define GCC_SYSTEM_NOC_BCR 0
+#define GCC_CONFIG_NOC_BCR 1
+#define GCC_PERIPH_NOC_BCR 2
+#define GCC_IMEM_BCR 3
+#define GCC_MMSS_BCR 4
+#define GCC_QDSS_BCR 5
+#define GCC_USB_30_BCR 6
+#define GCC_USB3_PHY_BCR 7
+#define GCC_USB_HS_HSIC_BCR 8
+#define GCC_USB_HS_BCR 9
+#define GCC_USB2A_PHY_BCR 10
+#define GCC_USB2B_PHY_BCR 11
+#define GCC_SDCC1_BCR 12
+#define GCC_SDCC2_BCR 13
+#define GCC_SDCC3_BCR 14
+#define GCC_SDCC4_BCR 15
+#define GCC_BLSP1_BCR 16
+#define GCC_BLSP1_QUP1_BCR 17
+#define GCC_BLSP1_UART1_BCR 18
+#define GCC_BLSP1_QUP2_BCR 19
+#define GCC_BLSP1_UART2_BCR 20
+#define GCC_BLSP1_QUP3_BCR 21
+#define GCC_BLSP1_UART3_BCR 22
+#define GCC_BLSP1_QUP4_BCR 23
+#define GCC_BLSP1_UART4_BCR 24
+#define GCC_BLSP1_QUP5_BCR 25
+#define GCC_BLSP1_UART5_BCR 26
+#define GCC_BLSP1_QUP6_BCR 27
+#define GCC_BLSP1_UART6_BCR 28
+#define GCC_BLSP2_BCR 29
+#define GCC_BLSP2_QUP1_BCR 30
+#define GCC_BLSP2_UART1_BCR 31
+#define GCC_BLSP2_QUP2_BCR 32
+#define GCC_BLSP2_UART2_BCR 33
+#define GCC_BLSP2_QUP3_BCR 34
+#define GCC_BLSP2_UART3_BCR 35
+#define GCC_BLSP2_QUP4_BCR 36
+#define GCC_BLSP2_UART4_BCR 37
+#define GCC_BLSP2_QUP5_BCR 38
+#define GCC_BLSP2_UART5_BCR 39
+#define GCC_BLSP2_QUP6_BCR 40
+#define GCC_BLSP2_UART6_BCR 41
+#define GCC_PDM_BCR 42
+#define GCC_PRNG_BCR 43
+#define GCC_BAM_DMA_BCR 44
+#define GCC_TSIF_BCR 45
+#define GCC_TCSR_BCR 46
+#define GCC_BOOT_ROM_BCR 47
+#define GCC_MSG_RAM_BCR 48
+#define GCC_TLMM_BCR 49
+#define GCC_MPM_BCR 50
+#define GCC_MPM_AHB_RESET 51
+#define GCC_MPM_NON_AHB_RESET 52
+#define GCC_SEC_CTRL_BCR 53
+#define GCC_SPMI_BCR 54
+#define GCC_SPDM_BCR 55
+#define GCC_CE1_BCR 56
+#define GCC_CE2_BCR 57
+#define GCC_BIMC_BCR 58
+#define GCC_SNOC_BUS_TIMEOUT0_BCR 59
+#define GCC_SNOC_BUS_TIMEOUT2_BCR 60
+#define GCC_PNOC_BUS_TIMEOUT0_BCR 61
+#define GCC_PNOC_BUS_TIMEOUT1_BCR 62
+#define GCC_PNOC_BUS_TIMEOUT2_BCR 63
+#define GCC_PNOC_BUS_TIMEOUT3_BCR 64
+#define GCC_PNOC_BUS_TIMEOUT4_BCR 65
+#define GCC_CNOC_BUS_TIMEOUT0_BCR 66
+#define GCC_CNOC_BUS_TIMEOUT1_BCR 67
+#define GCC_CNOC_BUS_TIMEOUT2_BCR 68
+#define GCC_CNOC_BUS_TIMEOUT3_BCR 69
+#define GCC_CNOC_BUS_TIMEOUT4_BCR 70
+#define GCC_CNOC_BUS_TIMEOUT5_BCR 71
+#define GCC_CNOC_BUS_TIMEOUT6_BCR 72
+#define GCC_DEHR_BCR 73
+#define GCC_RBCPR_BCR 74
+#define GCC_MSS_RESTART 75
+#define GCC_LPASS_RESTART 76
+#define GCC_WCSS_RESTART 77
+#define GCC_VENUS_RESTART 78
+#define GCC_COPSS_SMMU_BCR 79
+#define GCC_SPSS_BCR 80
+#define GCC_PCIE_0_BCR 81
+#define GCC_PCIE_0_PHY_BCR 82
+#define GCC_PCIE_1_BCR 83
+#define GCC_PCIE_1_PHY_BCR 84
+#define GCC_USB_30_SEC_BCR 85
+#define GCC_USB3_SEC_PHY_BCR 86
+#define GCC_SATA_BCR 87
+#define GCC_CE3_BCR 88
+#define GCC_UFS_BCR 89
+#define GCC_USB30_PHY_COM_BCR 90
+
+#endif
diff --git a/dts/include/dt-bindings/reset/qcom,gcc-ipq806x.h b/dts/include/dt-bindings/reset/qcom,gcc-ipq806x.h
new file mode 100644
index 0000000000..0ad5ef930b
--- /dev/null
+++ b/dts/include/dt-bindings/reset/qcom,gcc-ipq806x.h
@@ -0,0 +1,132 @@
+/*
+ * Copyright (c) 2014, The Linux Foundation. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _DT_BINDINGS_RESET_IPQ_806X_H
+#define _DT_BINDINGS_RESET_IPQ_806X_H
+
+#define QDSS_STM_RESET 0
+#define AFAB_SMPSS_S_RESET 1
+#define AFAB_SMPSS_M1_RESET 2
+#define AFAB_SMPSS_M0_RESET 3
+#define AFAB_EBI1_CH0_RESET 4
+#define AFAB_EBI1_CH1_RESET 5
+#define SFAB_ADM0_M0_RESET 6
+#define SFAB_ADM0_M1_RESET 7
+#define SFAB_ADM0_M2_RESET 8
+#define ADM0_C2_RESET 9
+#define ADM0_C1_RESET 10
+#define ADM0_C0_RESET 11
+#define ADM0_PBUS_RESET 12
+#define ADM0_RESET 13
+#define QDSS_CLKS_SW_RESET 14
+#define QDSS_POR_RESET 15
+#define QDSS_TSCTR_RESET 16
+#define QDSS_HRESET_RESET 17
+#define QDSS_AXI_RESET 18
+#define QDSS_DBG_RESET 19
+#define SFAB_PCIE_M_RESET 20
+#define SFAB_PCIE_S_RESET 21
+#define PCIE_EXT_RESET 22
+#define PCIE_PHY_RESET 23
+#define PCIE_PCI_RESET 24
+#define PCIE_POR_RESET 25
+#define PCIE_HCLK_RESET 26
+#define PCIE_ACLK_RESET 27
+#define SFAB_LPASS_RESET 28
+#define SFAB_AFAB_M_RESET 29
+#define AFAB_SFAB_M0_RESET 30
+#define AFAB_SFAB_M1_RESET 31
+#define SFAB_SATA_S_RESET 32
+#define SFAB_DFAB_M_RESET 33
+#define DFAB_SFAB_M_RESET 34
+#define DFAB_SWAY0_RESET 35
+#define DFAB_SWAY1_RESET 36
+#define DFAB_ARB0_RESET 37
+#define DFAB_ARB1_RESET 38
+#define PPSS_PROC_RESET 39
+#define PPSS_RESET 40
+#define DMA_BAM_RESET 41
+#define SPS_TIC_H_RESET 42
+#define SFAB_CFPB_M_RESET 43
+#define SFAB_CFPB_S_RESET 44
+#define TSIF_H_RESET 45
+#define CE1_H_RESET 46
+#define CE1_CORE_RESET 47
+#define CE1_SLEEP_RESET 48
+#define CE2_H_RESET 49
+#define CE2_CORE_RESET 50
+#define SFAB_SFPB_M_RESET 51
+#define SFAB_SFPB_S_RESET 52
+#define RPM_PROC_RESET 53
+#define PMIC_SSBI2_RESET 54
+#define SDC1_RESET 55
+#define SDC2_RESET 56
+#define SDC3_RESET 57
+#define SDC4_RESET 58
+#define USB_HS1_RESET 59
+#define USB_HSIC_RESET 60
+#define USB_FS1_XCVR_RESET 61
+#define USB_FS1_RESET 62
+#define GSBI1_RESET 63
+#define GSBI2_RESET 64
+#define GSBI3_RESET 65
+#define GSBI4_RESET 66
+#define GSBI5_RESET 67
+#define GSBI6_RESET 68
+#define GSBI7_RESET 69
+#define SPDM_RESET 70
+#define SEC_CTRL_RESET 71
+#define TLMM_H_RESET 72
+#define SFAB_SATA_M_RESET 73
+#define SATA_RESET 74
+#define TSSC_RESET 75
+#define PDM_RESET 76
+#define MPM_H_RESET 77
+#define MPM_RESET 78
+#define SFAB_SMPSS_S_RESET 79
+#define PRNG_RESET 80
+#define SFAB_CE3_M_RESET 81
+#define SFAB_CE3_S_RESET 82
+#define CE3_SLEEP_RESET 83
+#define PCIE_1_M_RESET 84
+#define PCIE_1_S_RESET 85
+#define PCIE_1_EXT_RESET 86
+#define PCIE_1_PHY_RESET 87
+#define PCIE_1_PCI_RESET 88
+#define PCIE_1_POR_RESET 89
+#define PCIE_1_HCLK_RESET 90
+#define PCIE_1_ACLK_RESET 91
+#define PCIE_2_M_RESET 92
+#define PCIE_2_S_RESET 93
+#define PCIE_2_EXT_RESET 94
+#define PCIE_2_PHY_RESET 95
+#define PCIE_2_PCI_RESET 96
+#define PCIE_2_POR_RESET 97
+#define PCIE_2_HCLK_RESET 98
+#define PCIE_2_ACLK_RESET 99
+#define SFAB_USB30_S_RESET 100
+#define SFAB_USB30_M_RESET 101
+#define USB30_0_PORT2_HS_PHY_RESET 102
+#define USB30_0_MASTER_RESET 103
+#define USB30_0_SLEEP_RESET 104
+#define USB30_0_UTMI_PHY_RESET 105
+#define USB30_0_POWERON_RESET 106
+#define USB30_0_PHY_RESET 107
+#define USB30_1_MASTER_RESET 108
+#define USB30_1_SLEEP_RESET 109
+#define USB30_1_UTMI_PHY_RESET 110
+#define USB30_1_POWERON_RESET 111
+#define USB30_1_PHY_RESET 112
+#define NSSFB0_RESET 113
+#define NSSFB1_RESET 114
+#endif
diff --git a/dts/include/dt-bindings/reset/qcom,gcc-msm8960.h b/dts/include/dt-bindings/reset/qcom,gcc-msm8960.h
index 07edd0e65e..47c8686955 100644
--- a/dts/include/dt-bindings/reset/qcom,gcc-msm8960.h
+++ b/dts/include/dt-bindings/reset/qcom,gcc-msm8960.h
@@ -114,5 +114,21 @@
#define SFAB_SMPSS_S_RESET 97
#define PRNG_RESET 98
#define RIVA_RESET 99
+#define USB_HS3_RESET 100
+#define USB_HS4_RESET 101
+#define CE3_RESET 102
+#define PCIE_EXT_PCI_RESET 103
+#define PCIE_PHY_RESET 104
+#define PCIE_PCI_RESET 105
+#define PCIE_POR_RESET 106
+#define PCIE_HCLK_RESET 107
+#define PCIE_ACLK_RESET 108
+#define CE3_H_RESET 109
+#define SFAB_CE3_M_RESET 110
+#define SFAB_CE3_S_RESET 111
+#define SATA_RESET 112
+#define CE3_SLEEP_RESET 113
+#define GSS_SLP_RESET 114
+#define GSS_RESET 115
#endif
diff --git a/dts/include/dt-bindings/reset/qcom,mmcc-apq8084.h b/dts/include/dt-bindings/reset/qcom,mmcc-apq8084.h
new file mode 100644
index 0000000000..c167139653
--- /dev/null
+++ b/dts/include/dt-bindings/reset/qcom,mmcc-apq8084.h
@@ -0,0 +1,64 @@
+/*
+ * Copyright (c) 2014, The Linux Foundation. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _DT_BINDINGS_RESET_APQ_MMCC_8084_H
+#define _DT_BINDINGS_RESET_APQ_MMCC_8084_H
+
+#define MMSS_SPDM_RESET 0
+#define MMSS_SPDM_RM_RESET 1
+#define VENUS0_RESET 2
+#define VPU_RESET 3
+#define MDSS_RESET 4
+#define AVSYNC_RESET 5
+#define CAMSS_PHY0_RESET 6
+#define CAMSS_PHY1_RESET 7
+#define CAMSS_PHY2_RESET 8
+#define CAMSS_CSI0_RESET 9
+#define CAMSS_CSI0PHY_RESET 10
+#define CAMSS_CSI0RDI_RESET 11
+#define CAMSS_CSI0PIX_RESET 12
+#define CAMSS_CSI1_RESET 13
+#define CAMSS_CSI1PHY_RESET 14
+#define CAMSS_CSI1RDI_RESET 15
+#define CAMSS_CSI1PIX_RESET 16
+#define CAMSS_CSI2_RESET 17
+#define CAMSS_CSI2PHY_RESET 18
+#define CAMSS_CSI2RDI_RESET 19
+#define CAMSS_CSI2PIX_RESET 20
+#define CAMSS_CSI3_RESET 21
+#define CAMSS_CSI3PHY_RESET 22
+#define CAMSS_CSI3RDI_RESET 23
+#define CAMSS_CSI3PIX_RESET 24
+#define CAMSS_ISPIF_RESET 25
+#define CAMSS_CCI_RESET 26
+#define CAMSS_MCLK0_RESET 27
+#define CAMSS_MCLK1_RESET 28
+#define CAMSS_MCLK2_RESET 29
+#define CAMSS_MCLK3_RESET 30
+#define CAMSS_GP0_RESET 31
+#define CAMSS_GP1_RESET 32
+#define CAMSS_TOP_RESET 33
+#define CAMSS_AHB_RESET 34
+#define CAMSS_MICRO_RESET 35
+#define CAMSS_JPEG_RESET 36
+#define CAMSS_VFE_RESET 37
+#define CAMSS_CSI_VFE0_RESET 38
+#define CAMSS_CSI_VFE1_RESET 39
+#define OXILI_RESET 40
+#define OXILICX_RESET 41
+#define OCMEMCX_RESET 42
+#define MMSS_RBCRP_RESET 43
+#define MMSSNOCAHB_RESET 44
+#define MMSSNOCAXI_RESET 45
+
+#endif
diff --git a/dts/include/dt-bindings/reset/qcom,mmcc-msm8960.h b/dts/include/dt-bindings/reset/qcom,mmcc-msm8960.h
index ba36ec6801..11741113a8 100644
--- a/dts/include/dt-bindings/reset/qcom,mmcc-msm8960.h
+++ b/dts/include/dt-bindings/reset/qcom,mmcc-msm8960.h
@@ -89,5 +89,13 @@
#define CSI2_RESET 72
#define CSI_RDI1_RESET 73
#define CSI_RDI2_RESET 74
+#define GFX3D_AXI_RESET 75
+#define VCAP_AXI_RESET 76
+#define SMMU_VCAP_AHB_RESET 77
+#define VCAP_AHB_RESET 78
+#define CSI_RDI_RESET 79
+#define CSI_PIX_RESET 80
+#define VCAP_NPL_RESET 81
+#define VCAP_RESET 82
#endif
diff --git a/dts/src/arc/angel4.dts b/dts/src/arc/angel4.dts
index 5bb2fdaca0..6b57475967 100644
--- a/dts/src/arc/angel4.dts
+++ b/dts/src/arc/angel4.dts
@@ -17,7 +17,7 @@
interrupt-parent = <&intc>;
chosen {
- bootargs = "console=ttyARC0,115200n8 earlyprintk=ttyARC0";
+ bootargs = "earlycon=arc_uart,mmio32,0xc0fc1000,115200n8 console=ttyARC0,115200n8";
};
aliases {
diff --git a/dts/src/arm/aks-cdu.dts b/dts/src/arm/aks-cdu.dts
index 54cb5cf860..d9c50fbb49 100644
--- a/dts/src/arm/aks-cdu.dts
+++ b/dts/src/arm/aks-cdu.dts
@@ -16,6 +16,12 @@
bootargs = "console=ttyS0,115200 ubi.mtd=4 root=ubi0:rootfs rootfstype=ubifs";
};
+ clocks {
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+ };
+
ahb {
apb {
usart0: serial@fffb0000 {
diff --git a/dts/src/arm/am335x-evmsk.dts b/dts/src/arm/am335x-evmsk.dts
index 80a3b215e7..df5fee6b6b 100644
--- a/dts/src/arm/am335x-evmsk.dts
+++ b/dts/src/arm/am335x-evmsk.dts
@@ -149,12 +149,113 @@
"Headphone Jack", "HPLOUT",
"Headphone Jack", "HPROUT";
};
+
+ panel {
+ compatible = "ti,tilcdc,panel";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&lcd_pins_default>;
+ pinctrl-1 = <&lcd_pins_sleep>;
+ status = "okay";
+ panel-info {
+ ac-bias = <255>;
+ ac-bias-intrpt = <0>;
+ dma-burst-sz = <16>;
+ bpp = <32>;
+ fdd = <0x80>;
+ sync-edge = <0>;
+ sync-ctrl = <1>;
+ raster-order = <0>;
+ fifo-th = <0>;
+ };
+ display-timings {
+ 480x272 {
+ hactive = <480>;
+ vactive = <272>;
+ hback-porch = <43>;
+ hfront-porch = <8>;
+ hsync-len = <4>;
+ vback-porch = <12>;
+ vfront-porch = <4>;
+ vsync-len = <10>;
+ clock-frequency = <9000000>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ };
+ };
+ };
};
&am33xx_pinmux {
pinctrl-names = "default";
pinctrl-0 = <&gpio_keys_s0 &clkout2_pin>;
+ lcd_pins_default: lcd_pins_default {
+ pinctrl-single,pins = <
+ 0x20 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad8.lcd_data23 */
+ 0x24 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad9.lcd_data22 */
+ 0x28 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad10.lcd_data21 */
+ 0x2c (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad11.lcd_data20 */
+ 0x30 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad12.lcd_data19 */
+ 0x34 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad13.lcd_data18 */
+ 0x38 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad14.lcd_data17 */
+ 0x3c (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad15.lcd_data16 */
+ 0xa0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data0.lcd_data0 */
+ 0xa4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data1.lcd_data1 */
+ 0xa8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data2.lcd_data2 */
+ 0xac (PIN_OUTPUT | MUX_MODE0) /* lcd_data3.lcd_data3 */
+ 0xb0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data4.lcd_data4 */
+ 0xb4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data5.lcd_data5 */
+ 0xb8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data6.lcd_data6 */
+ 0xbc (PIN_OUTPUT | MUX_MODE0) /* lcd_data7.lcd_data7 */
+ 0xc0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data8.lcd_data8 */
+ 0xc4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data9.lcd_data9 */
+ 0xc8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data10.lcd_data10 */
+ 0xcc (PIN_OUTPUT | MUX_MODE0) /* lcd_data11.lcd_data11 */
+ 0xd0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data12.lcd_data12 */
+ 0xd4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data13.lcd_data13 */
+ 0xd8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data14.lcd_data14 */
+ 0xdc (PIN_OUTPUT | MUX_MODE0) /* lcd_data15.lcd_data15 */
+ 0xe0 (PIN_OUTPUT | MUX_MODE0) /* lcd_vsync.lcd_vsync */
+ 0xe4 (PIN_OUTPUT | MUX_MODE0) /* lcd_hsync.lcd_hsync */
+ 0xe8 (PIN_OUTPUT | MUX_MODE0) /* lcd_pclk.lcd_pclk */
+ 0xec (PIN_OUTPUT | MUX_MODE0) /* lcd_ac_bias_en.lcd_ac_bias_en */
+ >;
+ };
+
+ lcd_pins_sleep: lcd_pins_sleep {
+ pinctrl-single,pins = <
+ 0x20 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad8.lcd_data23 */
+ 0x24 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad9.lcd_data22 */
+ 0x28 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad10.lcd_data21 */
+ 0x2c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad11.lcd_data20 */
+ 0x30 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad12.lcd_data19 */
+ 0x34 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad13.lcd_data18 */
+ 0x38 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad14.lcd_data17 */
+ 0x3c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad15.lcd_data16 */
+ 0xa0 (PULL_DISABLE | MUX_MODE7) /* lcd_data0.lcd_data0 */
+ 0xa4 (PULL_DISABLE | MUX_MODE7) /* lcd_data1.lcd_data1 */
+ 0xa8 (PULL_DISABLE | MUX_MODE7) /* lcd_data2.lcd_data2 */
+ 0xac (PULL_DISABLE | MUX_MODE7) /* lcd_data3.lcd_data3 */
+ 0xb0 (PULL_DISABLE | MUX_MODE7) /* lcd_data4.lcd_data4 */
+ 0xb4 (PULL_DISABLE | MUX_MODE7) /* lcd_data5.lcd_data5 */
+ 0xb8 (PULL_DISABLE | MUX_MODE7) /* lcd_data6.lcd_data6 */
+ 0xbc (PULL_DISABLE | MUX_MODE7) /* lcd_data7.lcd_data7 */
+ 0xc0 (PULL_DISABLE | MUX_MODE7) /* lcd_data8.lcd_data8 */
+ 0xc4 (PULL_DISABLE | MUX_MODE7) /* lcd_data9.lcd_data9 */
+ 0xc8 (PULL_DISABLE | MUX_MODE7) /* lcd_data10.lcd_data10 */
+ 0xcc (PULL_DISABLE | MUX_MODE7) /* lcd_data11.lcd_data11 */
+ 0xd0 (PULL_DISABLE | MUX_MODE7) /* lcd_data12.lcd_data12 */
+ 0xd4 (PULL_DISABLE | MUX_MODE7) /* lcd_data13.lcd_data13 */
+ 0xd8 (PULL_DISABLE | MUX_MODE7) /* lcd_data14.lcd_data14 */
+ 0xdc (PULL_DISABLE | MUX_MODE7) /* lcd_data15.lcd_data15 */
+ 0xe0 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_vsync.lcd_vsync */
+ 0xe4 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_hsync.lcd_hsync */
+ 0xe8 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_pclk.lcd_pclk */
+ 0xec (PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_ac_bias_en.lcd_ac_bias_en */
+ >;
+ };
+
+
user_leds_s0: user_leds_s0 {
pinctrl-single,pins = <
0x10 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad4.gpio1_4 */
@@ -573,3 +674,7 @@
ti,wire-config = <0x00 0x11 0x22 0x33>;
};
};
+
+&lcdc {
+ status = "okay";
+};
diff --git a/dts/src/arm/am335x-pepper.dts b/dts/src/arm/am335x-pepper.dts
new file mode 100644
index 0000000000..0d35ab6464
--- /dev/null
+++ b/dts/src/arm/am335x-pepper.dts
@@ -0,0 +1,653 @@
+/*
+ * Copyright (C) 2014 Gumstix, Inc. - https://www.gumstix.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "am33xx.dtsi"
+
+/ {
+ model = "Gumstix Pepper";
+ compatible = "gumstix,am335x-pepper", "ti,am33xx";
+
+ cpus {
+ cpu@0 {
+ cpu0-supply = <&dcdc3_reg>;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x20000000>; /* 512 MB */
+ };
+
+ buttons: user_buttons {
+ compatible = "gpio-keys";
+ };
+
+ leds: user_leds {
+ compatible = "gpio-leds";
+ };
+
+ panel: lcd_panel {
+ compatible = "ti,tilcdc,panel";
+ };
+
+ sound: sound_iface {
+ compatible = "ti,da830-evm-audio";
+ };
+
+ vbat: fixedregulator@0 {
+ compatible = "regulator-fixed";
+ };
+
+ v3v3c_reg: fixedregulator@1 {
+ compatible = "regulator-fixed";
+ };
+
+ vdd5_reg: fixedregulator@2 {
+ compatible = "regulator-fixed";
+ };
+};
+
+/* I2C Busses */
+&i2c0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+
+ clock-frequency = <400000>;
+
+ tps: tps@24 {
+ reg = <0x24>;
+ };
+
+ eeprom: eeprom@50 {
+ compatible = "at,24c256";
+ reg = <0x50>;
+ };
+
+ audio_codec: tlv320aic3106@1b {
+ compatible = "ti,tlv320aic3106";
+ reg = <0x1b>;
+ };
+
+ accel: lis331dlh@1d {
+ compatible = "st,lis3lv02d";
+ reg = <0x1d>;
+ };
+};
+
+&i2c1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+ clock-frequency = <400000>;
+};
+
+&am33xx_pinmux {
+ i2c0_pins: pinmux_i2c0 {
+ pinctrl-single,pins = <
+ 0x188 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */
+ 0x18c (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */
+ >;
+ };
+ i2c1_pins: pinmux_i2c1 {
+ pinctrl-single,pins = <
+ 0x10C (PIN_INPUT_PULLUP | MUX_MODE3) /* mii1_crs,i2c1_sda */
+ 0x110 (PIN_INPUT_PULLUP | MUX_MODE3) /* mii1_rxerr,i2c1_scl */
+ >;
+ };
+};
+
+/* Accelerometer */
+&accel {
+ pinctrl-names = "default";
+ pinctrl-0 = <&accel_pins>;
+
+ Vdd-supply = <&ldo3_reg>;
+ Vdd_IO-supply = <&ldo3_reg>;
+ st,irq1-click;
+ st,wakeup-x-lo;
+ st,wakeup-x-hi;
+ st,wakeup-y-lo;
+ st,wakeup-y-hi;
+ st,wakeup-z-lo;
+ st,wakeup-z-hi;
+ st,min-limit-x = <92>;
+ st,max-limit-x = <14>;
+ st,min-limit-y = <14>;
+ st,max-limit-y = <92>;
+ st,min-limit-z = <92>;
+ st,max-limit-z = <14>;
+};
+
+&am33xx_pinmux {
+ accel_pins: pinmux_accel {
+ pinctrl-single,pins = <
+ 0x98 (PIN_INPUT | MUX_MODE7) /* gpmc_wen.gpio2_4 */
+ >;
+ };
+};
+
+/* Audio */
+&audio_codec {
+ status = "okay";
+
+ gpio-reset = <&gpio1 16 GPIO_ACTIVE_LOW>;
+ AVDD-supply = <&ldo3_reg>;
+ IOVDD-supply = <&ldo3_reg>;
+ DRVDD-supply = <&ldo3_reg>;
+ DVDD-supply = <&dcdc1_reg>;
+};
+
+&sound {
+ ti,model = "AM335x-EVM";
+ ti,audio-codec = <&audio_codec>;
+ ti,mcasp-controller = <&mcasp0>;
+ ti,codec-clock-rate = <12000000>;
+ ti,audio-routing =
+ "Headphone Jack", "HPLOUT",
+ "Headphone Jack", "HPROUT",
+ "LINE1L", "Line In";
+};
+
+&mcasp0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&audio_pins>;
+
+ op-mode = <0>; /* MCASP_ISS_MODE */
+ tdm-slots = <2>;
+ serial-dir = <
+ 1 2 0 0
+ 0 0 0 0
+ 0 0 0 0
+ 0 0 0 0
+ >;
+ tx-num-evt = <1>;
+ rx-num-evt = <1>;
+};
+
+&am33xx_pinmux {
+ audio_pins: pinmux_audio {
+ pinctrl-single,pins = <
+ 0x1AC (PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_ahcklx.mcasp0_ahclkx */
+ 0x194 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_fsx.mcasp0_fsx */
+ 0x190 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_aclkx.mcasp0_aclkx */
+ 0x198 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_axr0.mcasp0_axr0 */
+ 0x1A8 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_axr1.mcasp0_axr1 */
+ 0x40 (PIN_OUTPUT | MUX_MODE7) /* gpmc_a0.gpio1_16 */
+ >;
+ };
+};
+
+/* Display: 24-bit LCD Screen */
+&panel {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcd_pins>;
+ panel-info {
+ ac-bias = <255>;
+ ac-bias-intrpt = <0>;
+ dma-burst-sz = <16>;
+ bpp = <32>;
+ fdd = <0x80>;
+ sync-edge = <0>;
+ sync-ctrl = <1>;
+ raster-order = <0>;
+ fifo-th = <0>;
+ };
+ display-timings {
+ native-mode = <&timing0>;
+ timing0: 480x272 {
+ clock-frequency = <18400000>;
+ hactive = <480>;
+ vactive = <272>;
+ hfront-porch = <8>;
+ hback-porch = <4>;
+ hsync-len = <41>;
+ vfront-porch = <4>;
+ vback-porch = <2>;
+ vsync-len = <10>;
+ hsync-active = <1>;
+ vsync-active = <1>;
+ };
+ };
+};
+
+&lcdc {
+ status = "okay";
+};
+
+&am33xx_pinmux {
+ lcd_pins: pinmux_lcd {
+ pinctrl-single,pins = <
+ 0xa0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data0.lcd_data0 */
+ 0xa4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data1.lcd_data1 */
+ 0xa8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data2.lcd_data2 */
+ 0xac (PIN_OUTPUT | MUX_MODE0) /* lcd_data3.lcd_data3 */
+ 0xb0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data4.lcd_data4 */
+ 0xb4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data5.lcd_data5 */
+ 0xb8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data6.lcd_data6 */
+ 0xbc (PIN_OUTPUT | MUX_MODE0) /* lcd_data7.lcd_data7 */
+ 0xc0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data8.lcd_data8 */
+ 0xc4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data9.lcd_data9 */
+ 0xc8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data10.lcd_data10 */
+ 0xcc (PIN_OUTPUT | MUX_MODE0) /* lcd_data11.lcd_data11 */
+ 0xd0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data12.lcd_data12 */
+ 0xd4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data13.lcd_data13 */
+ 0xd8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data14.lcd_data14 */
+ 0xdc (PIN_OUTPUT | MUX_MODE0) /* lcd_data15.lcd_data15 */
+ 0x20 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad8.lcd_data16 */
+ 0x24 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad9.lcd_data17 */
+ 0x28 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad10.lcd_data18 */
+ 0x2c (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad11.lcd_data19 */
+ 0x30 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad12.lcd_data20 */
+ 0x34 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad13.lcd_data21 */
+ 0x38 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad14.lcd_data22 */
+ 0x3c (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad15.lcd_data23 */
+ 0xe0 (PIN_OUTPUT | MUX_MODE0) /* lcd_vsync.lcd_vsync */
+ 0xe4 (PIN_OUTPUT | MUX_MODE0) /* lcd_hsync.lcd_hsync */
+ 0xe8 (PIN_OUTPUT | MUX_MODE0) /* lcd_pclk.lcd_pclk */
+ 0xec (PIN_OUTPUT | MUX_MODE0) /* lcd_ac_bias_en.lcd_ac_bias_en */
+ /* Display Enable */
+ 0x6c (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a11.gpio1_27 */
+ >;
+ };
+};
+
+/* Ethernet */
+&cpsw_emac0 {
+ status = "okay";
+ phy_id = <&davinci_mdio>, <0>;
+ phy-mode = "rgmii";
+};
+
+&cpsw_emac1 {
+ status = "okay";
+ phy_id = <&davinci_mdio>, <1>;
+ phy-mode = "rgmii";
+};
+
+&davinci_mdio {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mdio_pins>;
+};
+
+&mac {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&ethernet_pins>;
+};
+
+
+&am33xx_pinmux {
+ ethernet_pins: pinmux_ethernet {
+ pinctrl-single,pins = <
+ 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_tctl */
+ 0x118 (PIN_INPUT_PULLUP | MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */
+ 0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd3.rgmii1_td3 */
+ 0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd2.rgmii1_td2 */
+ 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td1 */
+ 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td0 */
+ 0x12c (PIN_INPUT_PULLUP | MUX_MODE2) /* mii1_txclk.rgmii1_tclk */
+ 0x130 (PIN_INPUT_PULLUP | MUX_MODE2) /* mii1_rxclk.rgmii1_rclk */
+ 0x134 (PIN_INPUT_PULLUP | MUX_MODE2) /* mii1_rxd3.rgmii1_rxd3 */
+ 0x138 (PIN_INPUT_PULLUP | MUX_MODE2) /* mii1_rxd2.rgmii1_rxd2 */
+ 0x13c (PIN_INPUT_PULLUP | MUX_MODE2) /* mii1_rxd1.rgmii1_rxd1 */
+ 0x140 (PIN_INPUT_PULLUP | MUX_MODE2) /* mii1_rxd0.rgmii1_rxd0 */
+ /* ethernet interrupt */
+ 0x144 (PIN_INPUT_PULLUP | MUX_MODE7) /* rmii2_refclk.gpio0_29 */
+ /* ethernet PHY nReset */
+ 0x108 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* mii1_col.gpio3_0 */
+ >;
+ };
+
+ mdio_pins: pinmux_mdio {
+ pinctrl-single,pins = <
+ 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
+ 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
+ >;
+ };
+};
+
+/* MMC */
+&mmc1 {
+ /* Bootable SD card slot */
+ status = "okay";
+ vmmc-supply = <&ldo3_reg>;
+ bus-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd_pins>;
+ cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+};
+
+&mmc2 {
+ /* eMMC (not populated) on MMC #2 */
+ status = "disabled";
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_pins>;
+ vmmc-supply = <&ldo3_reg>;
+ bus-width = <8>;
+ ti,non-removable;
+};
+
+&edma {
+ /* Map eDMA MMC2 Events from Crossbar */
+ ti,edma-xbar-event-map = /bits/ 16 <1 12
+ 2 13>;
+};
+
+
+&mmc3 {
+ /* Wifi & Bluetooth on MMC #3 */
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wireless_pins>;
+ vmmmc-supply = <&v3v3c_reg>;
+ bus-width = <4>;
+ ti,non-removable;
+ dmas = <&edma 12
+ &edma 13>;
+ dma-names = "tx", "rx";
+};
+
+
+&am33xx_pinmux {
+ sd_pins: pinmux_sd_card {
+ pinctrl-single,pins = <
+ 0xf0 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
+ 0xf4 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
+ 0xf8 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
+ 0xfc (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
+ 0x100 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk.mmc0_clk */
+ 0x104 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
+ 0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+ >;
+ };
+ emmc_pins: pinmux_emmc {
+ pinctrl-single,pins = <
+ 0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
+ 0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
+ 0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
+ 0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
+ 0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
+ 0x0c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
+ 0x10 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
+ 0x14 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
+ 0x18 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
+ 0x1c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
+ /* EMMC nReset */
+ 0x74 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_31 */
+ >;
+ };
+ wireless_pins: pinmux_wireless {
+ pinctrl-single,pins = <
+ 0x44 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a1.mmc2_dat0 */
+ 0x48 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a2.mmc2_dat1 */
+ 0x4c (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a3.mmc2_dat2 */
+ 0x78 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ben1.mmc2_dat3 */
+ 0x88 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_csn3.mmc2_cmd */
+ 0x8c (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_clk.mmc1_clk */
+ /* WLAN nReset */
+ 0x60 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a8.gpio1_24 */
+ /* WLAN nPower down */
+ 0x70 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_wait0.gpio0_30 */
+ /* 32kHz Clock */
+ 0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */
+ >;
+ };
+};
+
+/* Power */
+&vbat {
+ regulator-name = "vbat";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+};
+
+&v3v3c_reg {
+ regulator-name = "v3v3c_reg";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vbat>;
+};
+
+&vdd5_reg {
+ regulator-name = "vdd5_reg";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vbat>;
+};
+
+/include/ "tps65217.dtsi"
+
+&tps {
+ backlight {
+ isel = <1>; /* ISET1 */
+ fdim = <200>; /* TPS65217_BL_FDIM_200HZ */
+ default-brightness = <80>;
+ };
+
+ regulators {
+ dcdc1_reg: regulator@0 {
+ /* VDD_1V8 system supply */
+ };
+
+ dcdc2_reg: regulator@1 {
+ /* VDD_CORE voltage limits 0.95V - 1.26V with +/-4% tolerance */
+ regulator-name = "vdd_core";
+ regulator-min-microvolt = <925000>;
+ regulator-max-microvolt = <1325000>;
+ regulator-boot-on;
+ };
+
+ dcdc3_reg: regulator@2 {
+ /* VDD_MPU voltage limits 0.95V - 1.1V with +/-4% tolerance */
+ regulator-name = "vdd_mpu";
+ regulator-min-microvolt = <925000>;
+ regulator-max-microvolt = <1150000>;
+ regulator-boot-on;
+ };
+
+ ldo1_reg: regulator@3 {
+ /* VRTC 1.8V always-on supply */
+ regulator-always-on;
+ };
+
+ ldo2_reg: regulator@4 {
+ /* 3.3V rail */
+ };
+
+ ldo3_reg: regulator@5 {
+ /* VDD_3V3A 3.3V rail */
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo4_reg: regulator@6 {
+ /* VDD_3V3B 3.3V rail */
+ };
+ };
+};
+
+/* SPI Busses */
+&spi0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_pins>;
+};
+
+&am33xx_pinmux {
+ spi0_pins: pinmux_spi0 {
+ pinctrl-single,pins = <
+ 0x150 (PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_sclk.spi0_sclk */
+ 0x15C (PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_cs0.spi0_cs0 */
+ 0x154 (PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d0.spi0_d0 */
+ 0x158 (PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d1.spi0_d1 */
+ >;
+ };
+};
+
+/* Touch Screen */
+&tscadc {
+ status = "okay";
+ tsc {
+ ti,wires = <4>;
+ ti,x-plate-resistance = <200>;
+ ti,coordinate-readouts = <5>;
+ ti,wire-config = <0x00 0x11 0x22 0x33>;
+ };
+
+ adc {
+ ti,adc-channels = <4 5 6 7>;
+ };
+};
+
+/* UARTs */
+&uart0 {
+ /* Serial Console */
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins>;
+};
+
+&uart1 {
+ /* Broken out to J6 header */
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>;
+};
+
+&am33xx_pinmux {
+ uart0_pins: pinmux_uart0 {
+ pinctrl-single,pins = <
+ 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
+ 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
+ >;
+ };
+ uart1_pins: pinmux_uart1 {
+ pinctrl-single,pins = <
+ 0x178 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_ctsn.uart1_ctsn */
+ 0x17C (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_rtsn.uart1_rtsn */
+ 0x180 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rxd.uart1_rxd */
+ 0x184 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_txd.uart1_txd */
+ >;
+ };
+};
+
+/* USB */
+&usb {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb_pins>;
+};
+
+&usb_ctrl_mod {
+ status = "okay";
+};
+
+&usb0_phy {
+ status = "okay";
+};
+
+&usb1_phy {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+ dr_mode = "host";
+};
+
+&usb1 {
+ status = "okay";
+ dr_mode = "host";
+};
+
+&cppi41dma {
+ status = "okay";
+};
+
+&am33xx_pinmux {
+ usb_pins: pinmux_usb {
+ pinctrl-single,pins = <
+ /* USB0 Over-Current (active low) */
+ 0x64 (PIN_INPUT | MUX_MODE7) /* gpmc_a9.gpio1_25 */
+ /* USB1 Over-Current (active low) */
+ 0x68 (PIN_INPUT | MUX_MODE7) /* gpmc_a10.gpio1_26 */
+ >;
+ };
+};
+
+/* User IO */
+&leds {
+ pinctrl-names = "default";
+ pinctrl-0 = <&user_leds_pins>;
+
+ led@0 {
+ label = "pepper:user0:blue";
+ gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "none";
+ default-state = "off";
+ };
+
+ led@1 {
+ label = "pepper:user1:red";
+ gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "none";
+ default-state = "off";
+ };
+};
+
+&buttons {
+ pinctrl-names = "default";
+ pinctrl-0 = <&user_buttons_pins>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ button@0 {
+ label = "home";
+ linux,code = <KEY_HOME>;
+ gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
+ gpio-key,wakeup;
+ };
+
+ button@1 {
+ label = "menu";
+ linux,code = <KEY_MENU>;
+ gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
+ gpio-key,wakeup;
+ };
+
+ buttons@2 {
+ label = "power";
+ linux,code = <KEY_POWER>;
+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+ gpio-key,wakeup;
+ };
+};
+
+&am33xx_pinmux {
+ user_leds_pins: pinmux_user_leds {
+ pinctrl-single,pins = <
+ 0x50 (PIN_OUTPUT | MUX_MODE7) /* gpmc_a4.gpio1_20 */
+ 0x54 (PIN_OUTPUT | MUX_MODE7) /* gpmc_a5.gpio1_21 */
+ >;
+ };
+
+ user_buttons_pins: pinmux_user_buttons {
+ pinctrl-single,pins = <
+ 0x58 (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_a6.gpio1_22 */
+ 0x5C (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_a7.gpio1_21 */
+ 0x164 (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_a8.gpio0_7 */
+ >;
+ };
+};
diff --git a/dts/src/arm/am33xx.dtsi b/dts/src/arm/am33xx.dtsi
index 4a4e02d0ce..3a0a161342 100644
--- a/dts/src/arm/am33xx.dtsi
+++ b/dts/src/arm/am33xx.dtsi
@@ -347,6 +347,15 @@
status = "disabled";
};
+ mailbox: mailbox@480C8000 {
+ compatible = "ti,omap4-mailbox";
+ reg = <0x480C8000 0x200>;
+ interrupts = <77>;
+ ti,hwmods = "mailbox";
+ ti,mbox-num-users = <4>;
+ ti,mbox-num-fifos = <8>;
+ };
+
timer1: timer@44e31000 {
compatible = "ti,am335x-timer-1ms";
reg = <0x44e31000 0x400>;
diff --git a/dts/src/arm/am4372.dtsi b/dts/src/arm/am4372.dtsi
index 49fa596222..9b3d2ba82f 100644
--- a/dts/src/arm/am4372.dtsi
+++ b/dts/src/arm/am4372.dtsi
@@ -30,7 +30,7 @@
cpus {
#address-cells = <1>;
#size-cells = <0>;
- cpu@0 {
+ cpu: cpu@0 {
compatible = "arm,cortex-a9";
device_type = "cpu";
reg = <0>;
@@ -168,9 +168,6 @@
ti,hwmods = "mailbox";
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <8>;
- ti,mbox-names = "wkup_m3";
- ti,mbox-data = <0 0 0 0>;
- status = "disabled";
};
timer1: timer@44e31000 {
@@ -270,7 +267,7 @@
ti,hwmods = "counter_32k";
};
- rtc@44e3e000 {
+ rtc: rtc@44e3e000 {
compatible = "ti,am4372-rtc","ti,da830-rtc";
reg = <0x44e3e000 0x1000>;
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH
@@ -279,7 +276,7 @@
status = "disabled";
};
- wdt@44e35000 {
+ wdt: wdt@44e35000 {
compatible = "ti,am4372-wdt","ti,omap3-wdt";
reg = <0x44e35000 0x1000>;
interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
@@ -871,7 +868,7 @@
#size-cells = <1>;
ranges;
- dispc@4832a400 {
+ dispc: dispc@4832a400 {
compatible = "ti,omap3-dispc";
reg = <0x4832a400 0x400>;
interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/dts/src/arm/am437x-gp-evm.dts b/dts/src/arm/am437x-gp-evm.dts
index 003766c47b..646a6eade7 100644
--- a/dts/src/arm/am437x-gp-evm.dts
+++ b/dts/src/arm/am437x-gp-evm.dts
@@ -257,16 +257,73 @@
};
&i2c0 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins>;
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+ clock-frequency = <400000>;
+
+ tps65218: tps65218@24 {
+ reg = <0x24>;
+ compatible = "ti,tps65218";
+ interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* NMIn */
+ interrupt-parent = <&gic>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ dcdc1: regulator-dcdc1 {
+ compatible = "ti,tps65218-dcdc1";
+ regulator-name = "vdd_core";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <1144000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ dcdc2: regulator-dcdc2 {
+ compatible = "ti,tps65218-dcdc2";
+ regulator-name = "vdd_mpu";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <1378000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ dcdc3: regulator-dcdc3 {
+ compatible = "ti,tps65218-dcdc3";
+ regulator-name = "vdcdc3";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ dcdc5: regulator-dcdc5 {
+ compatible = "ti,tps65218-dcdc5";
+ regulator-name = "v1_0bat";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ };
+
+ dcdc6: regulator-dcdc6 {
+ compatible = "ti,tps65218-dcdc6";
+ regulator-name = "v1_8bat";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo1: regulator-ldo1 {
+ compatible = "ti,tps65218-ldo1";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
};
&i2c1 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins>;
-
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
pixcir_ts@5c {
compatible = "pixcir,pixcir_tangoc";
pinctrl-names = "default";
@@ -277,8 +334,8 @@
attb-gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
- x-size = <1024>;
- y-size = <600>;
+ touchscreen-size-x = <1024>;
+ touchscreen-size-y = <600>;
};
};
diff --git a/dts/src/arm/am437x-sk-evm.dts b/dts/src/arm/am437x-sk-evm.dts
new file mode 100644
index 0000000000..859ff3d620
--- /dev/null
+++ b/dts/src/arm/am437x-sk-evm.dts
@@ -0,0 +1,613 @@
+/*
+ * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/* AM437x SK EVM */
+
+/dts-v1/;
+
+#include "am4372.dtsi"
+#include <dt-bindings/pinctrl/am43xx.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "TI AM437x SK EVM";
+ compatible = "ti,am437x-sk-evm","ti,am4372","ti,am43";
+
+ aliases {
+ display0 = &lcd0;
+ };
+
+ backlight {
+ compatible = "pwm-backlight";
+ pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>;
+ brightness-levels = <0 51 53 56 62 75 101 152 255>;
+ default-brightness-level = <8>;
+ };
+
+ sound {
+ compatible = "ti,da830-evm-audio";
+ ti,model = "AM437x-SK-EVM";
+ ti,audio-codec = <&tlv320aic3106>;
+ ti,mcasp-controller = <&mcasp1>;
+ ti,codec-clock-rate = <24000000>;
+ ti,audio-routing =
+ "Headphone Jack", "HPLOUT",
+ "Headphone Jack", "HPROUT";
+ };
+
+ matrix_keypad: matrix_keypad@0 {
+ compatible = "gpio-matrix-keypad";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&matrix_keypad_pins>;
+
+ debounce-delay-ms = <5>;
+ col-scan-delay-us = <1500>;
+
+ row-gpios = <&gpio5 5 GPIO_ACTIVE_HIGH /* Bank5, pin5 */
+ &gpio5 6 GPIO_ACTIVE_HIGH>; /* Bank5, pin6 */
+
+ col-gpios = <&gpio5 13 GPIO_ACTIVE_HIGH /* Bank5, pin13 */
+ &gpio5 4 GPIO_ACTIVE_HIGH>; /* Bank5, pin4 */
+
+ linux,keymap = <
+ MATRIX_KEY(0, 0, KEY_DOWN)
+ MATRIX_KEY(0, 1, KEY_RIGHT)
+ MATRIX_KEY(1, 0, KEY_LEFT)
+ MATRIX_KEY(1, 1, KEY_UP)
+ >;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&leds_pins>;
+
+ led@0 {
+ label = "am437x-sk:red:heartbeat";
+ gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>; /* Bank 5, pin 0 */
+ linux,default-trigger = "heartbeat";
+ default-state = "off";
+ };
+
+ led@1 {
+ label = "am437x-sk:green:mmc1";
+ gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; /* Bank 5, pin 1 */
+ linux,default-trigger = "mmc0";
+ default-state = "off";
+ };
+
+ led@2 {
+ label = "am437x-sk:blue:cpu0";
+ gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>; /* Bank 5, pin 2 */
+ linux,default-trigger = "cpu0";
+ default-state = "off";
+ };
+
+ led@3 {
+ label = "am437x-sk:blue:usr3";
+ gpios = <&gpio5 3 GPIO_ACTIVE_HIGH>; /* Bank 5, pin 3 */
+ default-state = "off";
+ };
+ };
+
+ lcd0: display {
+ compatible = "osddisplays,osd057T0559-34ts", "panel-dpi";
+ label = "lcd";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcd_pins>;
+
+ enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+
+ panel-timing {
+ clock-frequency = <9000000>;
+ hactive = <480>;
+ vactive = <272>;
+ hfront-porch = <8>;
+ hback-porch = <43>;
+ hsync-len = <4>;
+ vback-porch = <12>;
+ vfront-porch = <4>;
+ vsync-len = <10>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <1>;
+ };
+
+ port {
+ lcd_in: endpoint {
+ remote-endpoint = <&dpi_out>;
+ };
+ };
+ };
+};
+
+&am43xx_pinmux {
+ matrix_keypad_pins: matrix_keypad_pins {
+ pinctrl-single,pins = <
+ 0x24c (PIN_OUTPUT | MUX_MODE7) /* gpio5_13.gpio5_13 */
+ 0x250 (PIN_OUTPUT | MUX_MODE7) /* spi4_sclk.gpio5_4 */
+ 0x254 (PIN_INPUT | MUX_MODE7) /* spi4_d0.gpio5_5 */
+ 0x258 (PIN_INPUT | MUX_MODE7) /* spi4_d1.gpio5_5 */
+ >;
+ };
+
+ leds_pins: leds_pins {
+ pinctrl-single,pins = <
+ 0x228 (PIN_OUTPUT | MUX_MODE7) /* uart3_rxd.gpio5_2 */
+ 0x22c (PIN_OUTPUT | MUX_MODE7) /* uart3_txd.gpio5_3 */
+ 0x230 (PIN_OUTPUT | MUX_MODE7) /* uart3_ctsn.gpio5_0 */
+ 0x234 (PIN_OUTPUT | MUX_MODE7) /* uart3_rtsn.gpio5_1 */
+ >;
+ };
+
+ i2c0_pins: i2c0_pins {
+ pinctrl-single,pins = <
+ 0x188 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_sda.i2c0_sda */
+ 0x18c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_scl.i2c0_scl */
+ >;
+ };
+
+ i2c1_pins: i2c1_pins {
+ pinctrl-single,pins = <
+ 0x15c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2) /* spi0_cs0.i2c1_scl */
+ 0x158 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2) /* spi0_d1.i2c1_sda */
+ >;
+ };
+
+ mmc1_pins: pinmux_mmc1_pins {
+ pinctrl-single,pins = <
+ 0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+ >;
+ };
+
+ ecap0_pins: backlight_pins {
+ pinctrl-single,pins = <
+ 0x164 (PIN_OUTPUT | MUX_MODE0) /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out */
+ >;
+ };
+
+ edt_ft5306_ts_pins: edt_ft5306_ts_pins {
+ pinctrl-single,pins = <
+ 0x74 (PIN_INPUT | MUX_MODE7) /* gpmc_wpn.gpio0_31 */
+ 0x78 (PIN_OUTPUT | MUX_MODE7) /* gpmc_be1n.gpio1_28 */
+ >;
+ };
+
+ cpsw_default: cpsw_default {
+ pinctrl-single,pins = <
+ /* Slave 1 */
+ 0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rmii1_tclk */
+ 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_tctl */
+ 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td0 */
+ 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td1 */
+ 0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td2 */
+ 0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td3 */
+ 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxclk.rmii1_rclk */
+ 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */
+ 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rd0 */
+ 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rd1 */
+ 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rd2 */
+ 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rd3 */
+
+ /* Slave 2 */
+ 0x58 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a6.rgmii2_tclk */
+ 0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a0.rgmii2_tctl */
+ 0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a5.rgmii2_td0 */
+ 0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a4.rgmii2_td1 */
+ 0x4c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a3.rgmii2_td2 */
+ 0x48 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a2.rgmii2_td3 */
+ 0x5c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a7.rgmii2_rclk */
+ 0x44 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a1.rgmii2_rtcl */
+ 0x6c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a11.rgmii2_rd0 */
+ 0x68 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a10.rgmii2_rd1 */
+ 0x64 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a9.rgmii2_rd2 */
+ 0x60 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a8.rgmii2_rd3 */
+ >;
+ };
+
+ cpsw_sleep: cpsw_sleep {
+ pinctrl-single,pins = <
+ /* Slave 1 reset value */
+ 0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+
+ /* Slave 2 reset value */
+ 0x58 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x40 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x54 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x50 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x4c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x48 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x5c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x44 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x60 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ >;
+ };
+
+ davinci_mdio_default: davinci_mdio_default {
+ pinctrl-single,pins = <
+ /* MDIO */
+ 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
+ 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
+ >;
+ };
+
+ davinci_mdio_sleep: davinci_mdio_sleep {
+ pinctrl-single,pins = <
+ /* MDIO reset value */
+ 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ >;
+ };
+
+ dss_pins: dss_pins {
+ pinctrl-single,pins = <
+ 0x020 (PIN_OUTPUT_PULLUP | MUX_MODE1) /* gpmc ad 8 -> DSS DATA 23 */
+ 0x024 (PIN_OUTPUT_PULLUP | MUX_MODE1)
+ 0x028 (PIN_OUTPUT_PULLUP | MUX_MODE1)
+ 0x02c (PIN_OUTPUT_PULLUP | MUX_MODE1)
+ 0x030 (PIN_OUTPUT_PULLUP | MUX_MODE1)
+ 0x034 (PIN_OUTPUT_PULLUP | MUX_MODE1)
+ 0x038 (PIN_OUTPUT_PULLUP | MUX_MODE1)
+ 0x03c (PIN_OUTPUT_PULLUP | MUX_MODE1) /* gpmc ad 15 -> DSS DATA 16 */
+ 0x0a0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 0 */
+ 0x0a4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+ 0x0a8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+ 0x0ac (PIN_OUTPUT_PULLUP | MUX_MODE0)
+ 0x0b0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+ 0x0b4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+ 0x0b8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+ 0x0bc (PIN_OUTPUT_PULLUP | MUX_MODE0)
+ 0x0c0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+ 0x0c4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+ 0x0c8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+ 0x0cc (PIN_OUTPUT_PULLUP | MUX_MODE0)
+ 0x0d0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+ 0x0d4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+ 0x0d8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+ 0x0dc (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 15 */
+ 0x0e0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS VSYNC */
+ 0x0e4 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS HSYNC */
+ 0x0e8 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS PCLK */
+ 0x0ec (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS AC BIAS EN */
+
+ >;
+ };
+
+ qspi_pins: qspi_pins {
+ pinctrl-single,pins = <
+ 0x7c (PIN_OUTPUT_PULLUP | MUX_MODE3) /* gpmc_csn0.qspi_csn */
+ 0x88 (PIN_OUTPUT | MUX_MODE2) /* gpmc_csn3.qspi_clk */
+ 0x90 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_advn_ale.qspi_d0 */
+ 0x94 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_oen_ren.qspi_d1 */
+ 0x98 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_wen.qspi_d2 */
+ 0x9c (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_be0n_cle.qspi_d3 */
+ >;
+ };
+
+ mcasp1_pins: mcasp1_pins {
+ pinctrl-single,pins = <
+ 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */
+ 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */
+ 0x108 (PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */
+ 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */
+ >;
+ };
+
+ lcd_pins: lcd_pins {
+ pinctrl-single,pins = <
+ /* GPIO 5_8 to select LCD / HDMI */
+ 0x238 (PIN_OUTPUT_PULLUP | MUX_MODE7)
+ >;
+ };
+};
+
+&i2c0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+ clock-frequency = <400000>;
+
+ tps@24 {
+ compatible = "ti,tps65218";
+ reg = <0x24>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ dcdc1: regulator-dcdc1 {
+ compatible = "ti,tps65218-dcdc1";
+ /* VDD_CORE limits min of OPP50 and max of OPP100 */
+ regulator-name = "vdd_core";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <1144000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ dcdc2: regulator-dcdc2 {
+ compatible = "ti,tps65218-dcdc2";
+ /* VDD_MPU limits min of OPP50 and max of OPP_NITRO */
+ regulator-name = "vdd_mpu";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <1378000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ dcdc3: regulator-dcdc3 {
+ compatible = "ti,tps65218-dcdc3";
+ regulator-name = "vdds_ddr";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ dcdc4: regulator-dcdc4 {
+ compatible = "ti,tps65218-dcdc4";
+ regulator-name = "v3_3d";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo1: regulator-ldo1 {
+ compatible = "ti,tps65218-ldo1";
+ regulator-name = "v1_8d";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ };
+
+ at24@50 {
+ compatible = "at24,24c256";
+ pagesize = <64>;
+ reg = <0x50>;
+ };
+};
+
+&i2c1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+ clock-frequency = <400000>;
+
+ edt-ft5306@38 {
+ status = "okay";
+ compatible = "edt,edt-ft5306", "edt,edt-ft5x06";
+ pinctrl-names = "default";
+ pinctrl-0 = <&edt_ft5306_ts_pins>;
+
+ reg = <0x38>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <31 0>;
+
+ wake-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+
+ touchscreen-size-x = <480>;
+ touchscreen-size-y = <272>;
+ };
+
+ tlv320aic3106: tlv320aic3106@1b {
+ compatible = "ti,tlv320aic3106";
+ reg = <0x1b>;
+ status = "okay";
+
+ /* Regulators */
+ AVDD-supply = <&dcdc4>;
+ IOVDD-supply = <&dcdc4>;
+ DRVDD-supply = <&dcdc4>;
+ DVDD-supply = <&ldo1>;
+ };
+
+ lis331dlh@18 {
+ compatible = "st,lis331dlh";
+ reg = <0x18>;
+ status = "okay";
+
+ Vdd-supply = <&dcdc4>;
+ Vdd_IO-supply = <&dcdc4>;
+ interrupts-extended = <&gpio1 6 0>, <&gpio2 1 0>;
+ };
+};
+
+&epwmss0 {
+ status = "okay";
+};
+
+&ecap0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&ecap0_pins>;
+};
+
+&gpio0 {
+ status = "okay";
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&gpio5 {
+ status = "okay";
+};
+
+&mmc1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+
+ vmmc-supply = <&dcdc4>;
+ bus-width = <4>;
+ cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+};
+
+&usb2_phy1 {
+ status = "okay";
+};
+
+&usb1 {
+ dr_mode = "peripheral";
+ status = "okay";
+};
+
+&usb2_phy2 {
+ status = "okay";
+};
+
+&usb2 {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&qspi {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&qspi_pins>;
+
+ spi-max-frequency = <48000000>;
+ m25p80@0 {
+ compatible = "mx66l51235l";
+ spi-max-frequency = <48000000>;
+ reg = <0>;
+ spi-cpol;
+ spi-cpha;
+ spi-tx-bus-width = <1>;
+ spi-rx-bus-width = <4>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ /* MTD partition table.
+ * The ROM checks the first 512KiB
+ * for a valid file to boot(XIP).
+ */
+ partition@0 {
+ label = "QSPI.U_BOOT";
+ reg = <0x00000000 0x000080000>;
+ };
+ partition@1 {
+ label = "QSPI.U_BOOT.backup";
+ reg = <0x00080000 0x00080000>;
+ };
+ partition@2 {
+ label = "QSPI.U-BOOT-SPL_OS";
+ reg = <0x00100000 0x00010000>;
+ };
+ partition@3 {
+ label = "QSPI.U_BOOT_ENV";
+ reg = <0x00110000 0x00010000>;
+ };
+ partition@4 {
+ label = "QSPI.U-BOOT-ENV.backup";
+ reg = <0x00120000 0x00010000>;
+ };
+ partition@5 {
+ label = "QSPI.KERNEL";
+ reg = <0x00130000 0x0800000>;
+ };
+ partition@6 {
+ label = "QSPI.FILESYSTEM";
+ reg = <0x00930000 0x36D0000>;
+ };
+ };
+};
+
+&mac {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&cpsw_default>;
+ pinctrl-1 = <&cpsw_sleep>;
+ dual_emac = <1>;
+ status = "okay";
+};
+
+&davinci_mdio {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&davinci_mdio_default>;
+ pinctrl-1 = <&davinci_mdio_sleep>;
+ status = "okay";
+};
+
+&cpsw_emac0 {
+ phy_id = <&davinci_mdio>, <4>;
+ phy-mode = "rgmii";
+ dual_emac_res_vlan = <1>;
+};
+
+&cpsw_emac1 {
+ phy_id = <&davinci_mdio>, <5>;
+ phy-mode = "rgmii";
+ dual_emac_res_vlan = <2>;
+};
+
+&elm {
+ status = "okay";
+};
+
+&mcasp1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcasp1_pins>;
+
+ status = "okay";
+
+ op-mode = <0>;
+ tdm-slots = <2>;
+ serial-dir = <
+ 0 0 1 2
+ >;
+
+ tx-num-evt = <1>;
+ rx-num-evt = <1>;
+};
+
+&dss {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&dss_pins>;
+
+ port {
+ dpi_out: endpoint@0 {
+ remote-endpoint = <&lcd_in>;
+ data-lines = <24>;
+ };
+ };
+};
+
+&rtc {
+ status = "okay";
+};
+
+&wdt {
+ status = "okay";
+};
diff --git a/dts/src/arm/am43x-epos-evm.dts b/dts/src/arm/am43x-epos-evm.dts
index 90098f98a5..ed7dd23959 100644
--- a/dts/src/arm/am43x-epos-evm.dts
+++ b/dts/src/arm/am43x-epos-evm.dts
@@ -327,6 +327,65 @@
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins>;
+ clock-frequency = <400000>;
+
+ tps65218: tps65218@24 {
+ reg = <0x24>;
+ compatible = "ti,tps65218";
+ interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* NMIn */
+ interrupt-parent = <&gic>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ dcdc1: regulator-dcdc1 {
+ compatible = "ti,tps65218-dcdc1";
+ regulator-name = "vdd_core";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <1144000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ dcdc2: regulator-dcdc2 {
+ compatible = "ti,tps65218-dcdc2";
+ regulator-name = "vdd_mpu";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <1378000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ dcdc3: regulator-dcdc3 {
+ compatible = "ti,tps65218-dcdc3";
+ regulator-name = "vdcdc3";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ dcdc5: regulator-dcdc5 {
+ compatible = "ti,tps65218-dcdc5";
+ regulator-name = "v1_0bat";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ };
+
+ dcdc6: regulator-dcdc6 {
+ compatible = "ti,tps65218-dcdc6";
+ regulator-name = "v1_8bat";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo1: regulator-ldo1 {
+ compatible = "ti,tps65218-ldo1";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
at24@50 {
compatible = "at24,24c256";
@@ -344,8 +403,8 @@
attb-gpio = <&gpio1 17 GPIO_ACTIVE_HIGH>;
- x-size = <1024>;
- y-size = <600>;
+ touchscreen-size-x = <1024>;
+ touchscreen-size-y = <600>;
};
};
diff --git a/dts/src/arm/animeo_ip.dts b/dts/src/arm/animeo_ip.dts
index 3c4f6d983c..4e0ad3b827 100644
--- a/dts/src/arm/animeo_ip.dts
+++ b/dts/src/arm/animeo_ip.dts
@@ -40,6 +40,14 @@
compatible = "atmel,osc", "fixed-clock";
clock-frequency = <18432000>;
};
+
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ main_xtal {
+ clock-frequency = <18432000>;
+ };
};
ahb {
diff --git a/dts/src/arm/armada-375-db.dts b/dts/src/arm/armada-375-db.dts
index 1e2919d43d..929ae00b40 100644
--- a/dts/src/arm/armada-375-db.dts
+++ b/dts/src/arm/armada-375-db.dts
@@ -123,6 +123,32 @@
cd-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
wp-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
};
+
+ mdio {
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ phy3: ethernet-phy@3 {
+ reg = <3>;
+ };
+ };
+
+ ethernet@f0000 {
+ status = "okay";
+
+ eth0@c4000 {
+ status = "okay";
+ phy = <&phy0>;
+ phy-mode = "rgmii-id";
+ };
+
+ eth1@c5000 {
+ status = "okay";
+ phy = <&phy3>;
+ phy-mode = "gmii";
+ };
+ };
};
pcie-controller {
diff --git a/dts/src/arm/armada-375.dtsi b/dts/src/arm/armada-375.dtsi
index fb92551a1e..c1e49e7bf0 100644
--- a/dts/src/arm/armada-375.dtsi
+++ b/dts/src/arm/armada-375.dtsi
@@ -25,6 +25,8 @@
gpio0 = &gpio0;
gpio1 = &gpio1;
gpio2 = &gpio2;
+ ethernet0 = &eth0;
+ ethernet1 = &eth1;
};
clocks {
@@ -151,6 +153,38 @@
<0xc100 0x100>;
};
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "marvell,orion-mdio";
+ reg = <0xc0054 0x4>;
+ clocks = <&gateclk 19>;
+ };
+
+ /* Network controller */
+ ethernet@f0000 {
+ compatible = "marvell,armada-375-pp2";
+ reg = <0xf0000 0xa000>, /* Packet Processor regs */
+ <0xc0000 0x3060>, /* LMS regs */
+ <0xc4000 0x100>, /* eth0 regs */
+ <0xc5000 0x100>; /* eth1 regs */
+ clocks = <&gateclk 3>, <&gateclk 19>;
+ clock-names = "pp_clk", "gop_clk";
+ status = "disabled";
+
+ eth0: eth0@c4000 {
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ port-id = <0>;
+ status = "disabled";
+ };
+
+ eth1: eth1@c5000 {
+ interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+ port-id = <1>;
+ status = "disabled";
+ };
+ };
+
spi0: spi@10600 {
compatible = "marvell,orion-spi";
reg = <0x10600 0x50>;
diff --git a/dts/src/arm/armada-38x.dtsi b/dts/src/arm/armada-38x.dtsi
index 689fa1a467..242d0ecc99 100644
--- a/dts/src/arm/armada-38x.dtsi
+++ b/dts/src/arm/armada-38x.dtsi
@@ -286,6 +286,11 @@
reg = <0x20800 0x10>;
};
+ mpcore-soc-ctrl@20d20 {
+ compatible = "marvell,armada-380-mpcore-soc-ctrl";
+ reg = <0x20d20 0x6c>;
+ };
+
coherency-fabric@21010 {
compatible = "marvell,armada-380-coherency-fabric";
reg = <0x21010 0x1c>;
diff --git a/dts/src/arm/armada-xp-lenovo-ix4-300d.dts b/dts/src/arm/armada-xp-lenovo-ix4-300d.dts
new file mode 100644
index 0000000000..469cf71375
--- /dev/null
+++ b/dts/src/arm/armada-xp-lenovo-ix4-300d.dts
@@ -0,0 +1,284 @@
+/*
+ * Device Tree file for Lenovo Iomega ix4-300d
+ *
+ * Copyright (C) 2014, Benoit Masson <yahoo@perenite.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-xp-mv78230.dtsi"
+
+/ {
+ model = "Lenovo Iomega ix4-300d";
+ compatible = "lenovo,ix4-300d", "marvell,armadaxp-mv78230",
+ "marvell,armadaxp", "marvell,armada-370-xp";
+
+ chosen {
+ bootargs = "console=ttyS0,115200 earlyprintk";
+ stdout-path = "/soc/internal-regs/serial@12000";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0 0x00000000 0 0x20000000>; /* 512MB */
+ };
+
+ soc {
+ ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
+ MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>;
+
+ pcie-controller {
+ status = "okay";
+
+ /* Quad port sata: Marvell 88SX7042 */
+ pcie@1,0 {
+ /* Port 0, Lane 0 */
+ status = "okay";
+ };
+
+ /* USB 3.0 xHCI controller: NEC D720200F1 */
+ pcie@5,0 {
+ /* Port 1, Lane 0 */
+ status = "okay";
+ };
+ };
+
+ internal-regs {
+ pinctrl {
+ poweroff_pin: poweroff-pin {
+ marvell,pins = "mpp24";
+ marvell,function = "gpio";
+ };
+
+ power_button_pin: power-button-pin {
+ marvell,pins = "mpp44";
+ marvell,function = "gpio";
+ };
+
+ reset_button_pin: reset-button-pin {
+ marvell,pins = "mpp45";
+ marvell,function = "gpio";
+ };
+ select_button_pin: select-button-pin {
+ marvell,pins = "mpp41";
+ marvell,function = "gpio";
+ };
+
+ scroll_button_pin: scroll-button-pin {
+ marvell,pins = "mpp42";
+ marvell,function = "gpio";
+ };
+
+ hdd_led_pin: hdd-led-pin {
+ marvell,pins = "mpp26";
+ marvell,function = "gpio";
+ };
+ };
+
+ serial@12000 {
+ status = "okay";
+ };
+
+ mdio {
+ phy0: ethernet-phy@0 { /* Marvell 88E1318 */
+ reg = <0>;
+ };
+
+ phy1: ethernet-phy@1 { /* Marvell 88E1318 */
+ reg = <1>;
+ };
+ };
+
+ ethernet@70000 {
+ status = "okay";
+ phy = <&phy0>;
+ phy-mode = "rgmii-id";
+ };
+
+ ethernet@74000 {
+ status = "okay";
+ phy = <&phy1>;
+ phy-mode = "rgmii-id";
+ };
+
+ usb@50000 {
+ status = "okay";
+ };
+
+ usb@51000 {
+ status = "okay";
+ };
+
+ i2c@11000 {
+ clock-frequency = <400000>;
+ status = "okay";
+
+ adt7473@2e {
+ compatible = "adi,adt7473";
+ reg = <0x2e>;
+ };
+
+ pcf8563@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+
+ };
+
+ nand@d0000 {
+ status = "okay";
+ num-cs = <1>;
+ marvell,nand-keep-config;
+ marvell,nand-enable-arbiter;
+ nand-on-flash-bbt;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0000000 0xe0000>;
+ read-only;
+ };
+
+ partition@e0000 {
+ label = "u-boot-env";
+ reg = <0xe0000 0x20000>;
+ read-only;
+ };
+
+ partition@100000 {
+ label = "u-boot-env2";
+ reg = <0x100000 0x20000>;
+ read-only;
+ };
+
+ partition@120000 {
+ label = "zImage";
+ reg = <0x120000 0x400000>;
+ };
+
+ partition@520000 {
+ label = "initrd";
+ reg = <0x520000 0x400000>;
+ };
+
+ partition@xE00000 {
+ label = "boot";
+ reg = <0xE00000 0x3F200000>;
+ };
+
+ partition@flash {
+ label = "flash";
+ reg = <0x0 0x40000000>;
+ };
+ };
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&power_button_pin &reset_button_pin
+ &select_button_pin &scroll_button_pin>;
+ pinctrl-names = "default";
+
+ power-button {
+ label = "Power Button";
+ linux,code = <KEY_POWER>;
+ gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+ };
+
+ reset-button {
+ label = "Reset Button";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+ };
+
+ select-button {
+ label = "Select Button";
+ linux,code = <BTN_SELECT>;
+ gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+ };
+
+ scroll-button {
+ label = "Scroll Button";
+ linux,code = <KEY_SCROLLDOWN>;
+ gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ spi3 {
+ compatible = "spi-gpio";
+ status = "okay";
+ gpio-sck = <&gpio0 25 GPIO_ACTIVE_LOW>;
+ gpio-mosi = <&gpio1 15 GPIO_ACTIVE_LOW>; /*gpio 47*/
+ cs-gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;
+ num-chipselects = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio_spi: gpio_spi@0 {
+ compatible = "fairchild,74hc595";
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0>;
+ registers-number = <2>;
+ spi-max-frequency = <100000>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&hdd_led_pin>;
+ pinctrl-names = "default";
+
+ hdd-led {
+ label = "ix4-300d:hdd:blue";
+ gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ power-led {
+ label = "ix4-300d:power:white";
+ gpios = <&gpio_spi 1 GPIO_ACTIVE_LOW>;
+ /* init blinking while booting */
+ linux,default-trigger = "timer";
+ default-state = "on";
+ };
+
+ sysfail-led {
+ label = "ix4-300d:sysfail:red";
+ gpios = <&gpio_spi 2 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ sys-led {
+ label = "ix4-300d:sys:blue";
+ gpios = <&gpio_spi 3 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ hddfail-led {
+ label = "ix4-300d:hddfail:red";
+ gpios = <&gpio_spi 4 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ };
+
+ /*
+ * Warning: you need both eth1 & 0 PHY initialized (i.e having
+ * them up does the tweak) for poweroff to shutdown otherwise it
+ * reboots
+ */
+ gpio-poweroff {
+ compatible = "gpio-poweroff";
+ pinctrl-0 = <&poweroff_pin>;
+ pinctrl-names = "default";
+ gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>;
+ };
+};
diff --git a/dts/src/arm/armada-xp-mv78230.dtsi b/dts/src/arm/armada-xp-mv78230.dtsi
index 1257ff1ed2..2592e1c135 100644
--- a/dts/src/arm/armada-xp-mv78230.dtsi
+++ b/dts/src/arm/armada-xp-mv78230.dtsi
@@ -34,6 +34,7 @@
compatible = "marvell,sheeva-v7";
reg = <0>;
clocks = <&cpuclk 0>;
+ clock-latency = <1000000>;
};
cpu@1 {
@@ -41,6 +42,7 @@
compatible = "marvell,sheeva-v7";
reg = <1>;
clocks = <&cpuclk 1>;
+ clock-latency = <1000000>;
};
};
diff --git a/dts/src/arm/armada-xp-mv78260.dtsi b/dts/src/arm/armada-xp-mv78260.dtsi
index 3396b25b39..480e237a87 100644
--- a/dts/src/arm/armada-xp-mv78260.dtsi
+++ b/dts/src/arm/armada-xp-mv78260.dtsi
@@ -36,6 +36,7 @@
compatible = "marvell,sheeva-v7";
reg = <0>;
clocks = <&cpuclk 0>;
+ clock-latency = <1000000>;
};
cpu@1 {
@@ -43,6 +44,7 @@
compatible = "marvell,sheeva-v7";
reg = <1>;
clocks = <&cpuclk 1>;
+ clock-latency = <1000000>;
};
};
diff --git a/dts/src/arm/armada-xp-mv78460.dtsi b/dts/src/arm/armada-xp-mv78460.dtsi
index 6da84bf40a..2c7b1fef47 100644
--- a/dts/src/arm/armada-xp-mv78460.dtsi
+++ b/dts/src/arm/armada-xp-mv78460.dtsi
@@ -37,6 +37,7 @@
compatible = "marvell,sheeva-v7";
reg = <0>;
clocks = <&cpuclk 0>;
+ clock-latency = <1000000>;
};
cpu@1 {
@@ -44,6 +45,7 @@
compatible = "marvell,sheeva-v7";
reg = <1>;
clocks = <&cpuclk 1>;
+ clock-latency = <1000000>;
};
cpu@2 {
@@ -51,6 +53,7 @@
compatible = "marvell,sheeva-v7";
reg = <2>;
clocks = <&cpuclk 2>;
+ clock-latency = <1000000>;
};
cpu@3 {
@@ -58,6 +61,7 @@
compatible = "marvell,sheeva-v7";
reg = <3>;
clocks = <&cpuclk 3>;
+ clock-latency = <1000000>;
};
};
diff --git a/dts/src/arm/armada-xp.dtsi b/dts/src/arm/armada-xp.dtsi
index 5902e8359c..bff9f6c18d 100644
--- a/dts/src/arm/armada-xp.dtsi
+++ b/dts/src/arm/armada-xp.dtsi
@@ -99,7 +99,7 @@
cpuclk: clock-complex@18700 {
#clock-cells = <1>;
compatible = "marvell,armada-xp-cpu-clock";
- reg = <0x18700 0xA0>;
+ reg = <0x18700 0xA0>, <0x1c054 0x10>;
clocks = <&coreclk 1>;
};
diff --git a/dts/src/arm/at91-ariag25.dts b/dts/src/arm/at91-ariag25.dts
index 55ab6180e3..e9ced30159 100644
--- a/dts/src/arm/at91-ariag25.dts
+++ b/dts/src/arm/at91-ariag25.dts
@@ -42,6 +42,14 @@
compatible = "atmel,osc", "fixed-clock";
clock-frequency = <12000000>;
};
+
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ main_xtal {
+ clock-frequency = <12000000>;
+ };
};
ahb {
diff --git a/dts/src/arm/at91-cosino.dtsi b/dts/src/arm/at91-cosino.dtsi
index df4b786956..b6ea3f4a72 100644
--- a/dts/src/arm/at91-cosino.dtsi
+++ b/dts/src/arm/at91-cosino.dtsi
@@ -34,6 +34,14 @@
compatible = "atmel,osc", "fixed-clock";
clock-frequency = <12000000>;
};
+
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ main_xtal {
+ clock-frequency = <12000000>;
+ };
};
ahb {
diff --git a/dts/src/arm/at91-foxg20.dts b/dts/src/arm/at91-foxg20.dts
index cbe9673439..f89598af4c 100644
--- a/dts/src/arm/at91-foxg20.dts
+++ b/dts/src/arm/at91-foxg20.dts
@@ -31,6 +31,14 @@
compatible = "atmel,osc", "fixed-clock";
clock-frequency = <18432000>;
};
+
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ main_xtal {
+ clock-frequency = <18432000>;
+ };
};
ahb {
diff --git a/dts/src/arm/at91-qil_a9260.dts b/dts/src/arm/at91-qil_a9260.dts
index 5576ae8786..a9aef53ab7 100644
--- a/dts/src/arm/at91-qil_a9260.dts
+++ b/dts/src/arm/at91-qil_a9260.dts
@@ -28,6 +28,14 @@
compatible = "atmel,osc", "fixed-clock";
clock-frequency = <12000000>;
};
+
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ main_xtal {
+ clock-frequency = <12000000>;
+ };
};
ahb {
diff --git a/dts/src/arm/at91-sama5d3_xplained.dts b/dts/src/arm/at91-sama5d3_xplained.dts
index 5b8e40400b..fec1fca2ad 100644
--- a/dts/src/arm/at91-sama5d3_xplained.dts
+++ b/dts/src/arm/at91-sama5d3_xplained.dts
@@ -21,12 +21,14 @@
reg = <0x20000000 0x10000000>;
};
- slow_xtal {
- clock-frequency = <32768>;
- };
+ clocks {
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
- main_xtal {
- clock-frequency = <12000000>;
+ main_xtal {
+ clock-frequency = <12000000>;
+ };
};
ahb {
diff --git a/dts/src/arm/at91rm9200.dtsi b/dts/src/arm/at91rm9200.dtsi
index c61b16fba7..65ccf564b9 100644
--- a/dts/src/arm/at91rm9200.dtsi
+++ b/dts/src/arm/at91rm9200.dtsi
@@ -14,6 +14,7 @@
#include <dt-bindings/pinctrl/at91.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/at91.h>
/ {
model = "Atmel AT91RM9200 family SoC";
@@ -51,6 +52,20 @@
reg = <0x20000000 0x04000000>;
};
+ clocks {
+ slow_xtal: slow_xtal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ main_xtal: main_xtal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+ };
+
ahb {
compatible = "simple-bus";
#address-cells = <1>;
@@ -79,6 +94,260 @@
pmc: pmc@fffffc00 {
compatible = "atmel,at91rm9200-pmc";
reg = <0xfffffc00 0x100>;
+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ interrupt-controller;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+
+ main_osc: main_osc {
+ compatible = "atmel,at91rm9200-clk-main-osc";
+ #clock-cells = <0>;
+ interrupts-extended = <&pmc AT91_PMC_MOSCS>;
+ clocks = <&main_xtal>;
+ };
+
+ main: mainck {
+ compatible = "atmel,at91rm9200-clk-main";
+ #clock-cells = <0>;
+ clocks = <&main_osc>;
+ };
+
+ plla: pllack {
+ compatible = "atmel,at91rm9200-clk-pll";
+ #clock-cells = <0>;
+ interrupts-extended = <&pmc AT91_PMC_LOCKA>;
+ clocks = <&main>;
+ reg = <0>;
+ atmel,clk-input-range = <1000000 32000000>;
+ #atmel,pll-clk-output-range-cells = <3>;
+ atmel,pll-clk-output-ranges = <80000000 160000000 0>,
+ <150000000 180000000 2>;
+ };
+
+ pllb: pllbck {
+ compatible = "atmel,at91rm9200-clk-pll";
+ #clock-cells = <0>;
+ interrupts-extended = <&pmc AT91_PMC_LOCKB>;
+ clocks = <&main>;
+ reg = <1>;
+ atmel,clk-input-range = <1000000 32000000>;
+ #atmel,pll-clk-output-range-cells = <3>;
+ atmel,pll-clk-output-ranges = <80000000 160000000 0>,
+ <150000000 180000000 2>;
+ };
+
+ mck: masterck {
+ compatible = "atmel,at91rm9200-clk-master";
+ #clock-cells = <0>;
+ interrupts-extended = <&pmc AT91_PMC_MCKRDY>;
+ clocks = <&slow_xtal>, <&main>, <&plla>, <&pllb>;
+ atmel,clk-output-range = <0 80000000>;
+ atmel,clk-divisors = <1 2 3 4>;
+ };
+
+ usb: usbck {
+ compatible = "atmel,at91rm9200-clk-usb";
+ #clock-cells = <0>;
+ atmel,clk-divisors = <1 2>;
+ clocks = <&pllb>;
+ };
+
+ prog: progck {
+ compatible = "atmel,at91rm9200-clk-programmable";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupt-parent = <&pmc>;
+ clocks = <&slow_xtal>, <&main>, <&plla>, <&pllb>;
+
+ prog0: prog0 {
+ #clock-cells = <0>;
+ reg = <0>;
+ interrupts = <AT91_PMC_PCKRDY(0)>;
+ };
+
+ prog1: prog1 {
+ #clock-cells = <0>;
+ reg = <1>;
+ interrupts = <AT91_PMC_PCKRDY(1)>;
+ };
+
+ prog2: prog2 {
+ #clock-cells = <0>;
+ reg = <2>;
+ interrupts = <AT91_PMC_PCKRDY(2)>;
+ };
+
+ prog3: prog3 {
+ #clock-cells = <0>;
+ reg = <3>;
+ interrupts = <AT91_PMC_PCKRDY(3)>;
+ };
+ };
+
+ systemck {
+ compatible = "atmel,at91rm9200-clk-system";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ udpck: udpck {
+ #clock-cells = <0>;
+ reg = <2>;
+ clocks = <&usb>;
+ };
+
+ uhpck: uhpck {
+ #clock-cells = <0>;
+ reg = <4>;
+ clocks = <&usb>;
+ };
+
+ pck0: pck0 {
+ #clock-cells = <0>;
+ reg = <8>;
+ clocks = <&prog0>;
+ };
+
+ pck1: pck1 {
+ #clock-cells = <0>;
+ reg = <9>;
+ clocks = <&prog1>;
+ };
+
+ pck2: pck2 {
+ #clock-cells = <0>;
+ reg = <10>;
+ clocks = <&prog2>;
+ };
+
+ pck3: pck3 {
+ #clock-cells = <0>;
+ reg = <11>;
+ clocks = <&prog3>;
+ };
+ };
+
+ periphck {
+ compatible = "atmel,at91rm9200-clk-peripheral";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&mck>;
+
+ pioA_clk: pioA_clk {
+ #clock-cells = <0>;
+ reg = <2>;
+ };
+
+ pioB_clk: pioB_clk {
+ #clock-cells = <0>;
+ reg = <3>;
+ };
+
+ pioC_clk: pioC_clk {
+ #clock-cells = <0>;
+ reg = <4>;
+ };
+
+ pioD_clk: pioD_clk {
+ #clock-cells = <0>;
+ reg = <5>;
+ };
+
+ usart0_clk: usart0_clk {
+ #clock-cells = <0>;
+ reg = <6>;
+ };
+
+ usart1_clk: usart1_clk {
+ #clock-cells = <0>;
+ reg = <7>;
+ };
+
+ usart2_clk: usart2_clk {
+ #clock-cells = <0>;
+ reg = <8>;
+ };
+
+ usart3_clk: usart3_clk {
+ #clock-cells = <0>;
+ reg = <9>;
+ };
+
+ mci0_clk: mci0_clk {
+ #clock-cells = <0>;
+ reg = <10>;
+ };
+
+ udc_clk: udc_clk {
+ #clock-cells = <0>;
+ reg = <11>;
+ };
+
+ twi0_clk: twi0_clk {
+ reg = <12>;
+ #clock-cells = <0>;
+ };
+
+ spi0_clk: spi0_clk {
+ #clock-cells = <0>;
+ reg = <13>;
+ };
+
+ ssc0_clk: ssc0_clk {
+ #clock-cells = <0>;
+ reg = <14>;
+ };
+
+ ssc1_clk: ssc1_clk {
+ #clock-cells = <0>;
+ reg = <15>;
+ };
+
+ ssc2_clk: ssc2_clk {
+ #clock-cells = <0>;
+ reg = <16>;
+ };
+
+ tc0_clk: tc0_clk {
+ #clock-cells = <0>;
+ reg = <17>;
+ };
+
+ tc1_clk: tc1_clk {
+ #clock-cells = <0>;
+ reg = <18>;
+ };
+
+ tc2_clk: tc2_clk {
+ #clock-cells = <0>;
+ reg = <19>;
+ };
+
+ tc3_clk: tc3_clk {
+ #clock-cells = <0>;
+ reg = <20>;
+ };
+
+ tc4_clk: tc4_clk {
+ #clock-cells = <0>;
+ reg = <21>;
+ };
+
+ tc5_clk: tc5_clk {
+ #clock-cells = <0>;
+ reg = <22>;
+ };
+
+ ohci_clk: ohci_clk {
+ #clock-cells = <0>;
+ reg = <23>;
+ };
+
+ macb0_clk: macb0_clk {
+ #clock-cells = <0>;
+ reg = <24>;
+ };
+ };
};
st: timer@fffffd00 {
@@ -93,6 +362,8 @@
interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0
18 IRQ_TYPE_LEVEL_HIGH 0
19 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&tc0_clk>, <&tc1_clk>, <&tc2_clk>;
+ clock-names = "t0_clk", "t1_clk", "t2_clk";
};
tcb1: timer@fffa4000 {
@@ -101,6 +372,8 @@
interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0
21 IRQ_TYPE_LEVEL_HIGH 0
22 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&tc3_clk>, <&tc4_clk>, <&tc5_clk>;
+ clock-names = "t0_clk", "t1_clk", "t2_clk";
};
i2c0: i2c@fffb8000 {
@@ -109,6 +382,7 @@
interrupts = <12 IRQ_TYPE_LEVEL_HIGH 6>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_twi>;
+ clocks = <&twi0_clk>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -118,6 +392,8 @@
compatible = "atmel,hsmci";
reg = <0xfffb4000 0x4000>;
interrupts = <10 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&mci0_clk>;
+ clock-names = "mci_clk";
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
@@ -130,6 +406,8 @@
interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+ clocks = <&ssc0_clk>;
+ clock-names = "pclk";
status = "disable";
};
@@ -139,6 +417,8 @@
interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
+ clocks = <&ssc1_clk>;
+ clock-names = "pclk";
status = "disable";
};
@@ -148,6 +428,8 @@
interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc2_tx &pinctrl_ssc2_rx>;
+ clocks = <&ssc2_clk>;
+ clock-names = "pclk";
status = "disable";
};
@@ -158,6 +440,8 @@
phy-mode = "rmii";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_macb_rmii>;
+ clocks = <&macb0_clk>;
+ clock-names = "ether_clk";
status = "disabled";
};
@@ -496,6 +780,7 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
+ clocks = <&pioA_clk>;
};
pioB: gpio@fffff600 {
@@ -506,6 +791,7 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
+ clocks = <&pioB_clk>;
};
pioC: gpio@fffff800 {
@@ -516,6 +802,7 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
+ clocks = <&pioC_clk>;
};
pioD: gpio@fffffa00 {
@@ -526,6 +813,7 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
+ clocks = <&pioD_clk>;
};
};
@@ -535,6 +823,8 @@
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_dbgu>;
+ clocks = <&mck>;
+ clock-names = "usart";
status = "disabled";
};
@@ -546,6 +836,8 @@
atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart0>;
+ clocks = <&usart0_clk>;
+ clock-names = "usart";
status = "disabled";
};
@@ -557,6 +849,8 @@
atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
+ clocks = <&usart1_clk>;
+ clock-names = "usart";
status = "disabled";
};
@@ -568,6 +862,8 @@
atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
+ clocks = <&usart2_clk>;
+ clock-names = "usart";
status = "disabled";
};
@@ -579,6 +875,8 @@
atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
+ clocks = <&usart3_clk>;
+ clock-names = "usart";
status = "disabled";
};
@@ -586,6 +884,8 @@
compatible = "atmel,at91rm9200-udc";
reg = <0xfffb0000 0x4000>;
interrupts = <11 IRQ_TYPE_LEVEL_HIGH 2>;
+ clocks = <&udc_clk>, <&udpck>;
+ clock-names = "pclk", "hclk";
status = "disabled";
};
@@ -597,6 +897,8 @@
interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi0>;
+ clocks = <&spi0_clk>;
+ clock-names = "spi_clk";
status = "disabled";
};
};
@@ -622,6 +924,8 @@
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00300000 0x100000>;
interrupts = <23 IRQ_TYPE_LEVEL_HIGH 2>;
+ clocks = <&usb>, <&ohci_clk>, <&ohci_clk>, <&uhpck>;
+ clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck";
status = "disabled";
};
};
diff --git a/dts/src/arm/at91rm9200ek.dts b/dts/src/arm/at91rm9200ek.dts
index df6b0aa0e4..43eb779dd6 100644
--- a/dts/src/arm/at91rm9200ek.dts
+++ b/dts/src/arm/at91rm9200ek.dts
@@ -25,6 +25,14 @@
compatible = "atmel,osc", "fixed-clock";
clock-frequency = <18432000>;
};
+
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ main_xtal {
+ clock-frequency = <18432000>;
+ };
};
ahb {
diff --git a/dts/src/arm/at91sam9260.dtsi b/dts/src/arm/at91sam9260.dtsi
index c0e0eae16a..cb100b03a3 100644
--- a/dts/src/arm/at91sam9260.dtsi
+++ b/dts/src/arm/at91sam9260.dtsi
@@ -12,6 +12,7 @@
#include <dt-bindings/pinctrl/at91.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/at91.h>
/ {
model = "Atmel AT91SAM9260 family SoC";
@@ -48,6 +49,26 @@
reg = <0x20000000 0x04000000>;
};
+ clocks {
+ slow_xtal: slow_xtal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ main_xtal: main_xtal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ adc_op_clk: adc_op_clk{
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <5000000>;
+ };
+ };
+
ahb {
compatible = "simple-bus";
#address-cells = <1>;
@@ -74,8 +95,260 @@
};
pmc: pmc@fffffc00 {
- compatible = "atmel,at91rm9200-pmc";
+ compatible = "atmel,at91sam9260-pmc";
reg = <0xfffffc00 0x100>;
+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ interrupt-controller;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+
+ main_osc: main_osc {
+ compatible = "atmel,at91rm9200-clk-main-osc";
+ #clock-cells = <0>;
+ interrupts-extended = <&pmc AT91_PMC_MOSCS>;
+ clocks = <&main_xtal>;
+ };
+
+ main: mainck {
+ compatible = "atmel,at91rm9200-clk-main";
+ #clock-cells = <0>;
+ clocks = <&main_osc>;
+ };
+
+ slow_rc_osc: slow_rc_osc {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-accuracy = <50000000>;
+ };
+
+ clk32k: slck {
+ compatible = "atmel,at91sam9260-clk-slow";
+ #clock-cells = <0>;
+ clocks = <&slow_rc_osc>, <&slow_xtal>;
+ };
+
+ plla: pllack {
+ compatible = "atmel,at91rm9200-clk-pll";
+ #clock-cells = <0>;
+ interrupts-extended = <&pmc AT91_PMC_LOCKA>;
+ clocks = <&main>;
+ reg = <0>;
+ atmel,clk-input-range = <1000000 32000000>;
+ #atmel,pll-clk-output-range-cells = <4>;
+ atmel,pll-clk-output-ranges = <80000000 160000000 0 1>,
+ <150000000 240000000 2 1>;
+ };
+
+ pllb: pllbck {
+ compatible = "atmel,at91rm9200-clk-pll";
+ #clock-cells = <0>;
+ interrupts-extended = <&pmc AT91_PMC_LOCKB>;
+ clocks = <&main>;
+ reg = <1>;
+ atmel,clk-input-range = <1000000 5000000>;
+ #atmel,pll-clk-output-range-cells = <4>;
+ atmel,pll-clk-output-ranges = <70000000 130000000 1 1>;
+ };
+
+ mck: masterck {
+ compatible = "atmel,at91rm9200-clk-master";
+ #clock-cells = <0>;
+ interrupts-extended = <&pmc AT91_PMC_MCKRDY>;
+ clocks = <&clk32k>, <&main>, <&plla>, <&pllb>;
+ atmel,clk-output-range = <0 105000000>;
+ atmel,clk-divisors = <1 2 4 0>;
+ };
+
+ usb: usbck {
+ compatible = "atmel,at91rm9200-clk-usb";
+ #clock-cells = <0>;
+ atmel,clk-divisors = <1 2 4 0>;
+ clocks = <&pllb>;
+ };
+
+ prog: progck {
+ compatible = "atmel,at91rm9200-clk-programmable";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupt-parent = <&pmc>;
+ clocks = <&clk32k>, <&main>, <&plla>, <&pllb>;
+
+ prog0: prog0 {
+ #clock-cells = <0>;
+ reg = <0>;
+ interrupts = <AT91_PMC_PCKRDY(0)>;
+ };
+
+ prog1: prog1 {
+ #clock-cells = <0>;
+ reg = <1>;
+ interrupts = <AT91_PMC_PCKRDY(1)>;
+ };
+ };
+
+ systemck {
+ compatible = "atmel,at91rm9200-clk-system";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ uhpck: uhpck {
+ #clock-cells = <0>;
+ reg = <6>;
+ clocks = <&usb>;
+ };
+
+ udpck: udpck {
+ #clock-cells = <0>;
+ reg = <7>;
+ clocks = <&usb>;
+ };
+
+ pck0: pck0 {
+ #clock-cells = <0>;
+ reg = <8>;
+ clocks = <&prog0>;
+ };
+
+ pck1: pck1 {
+ #clock-cells = <0>;
+ reg = <9>;
+ clocks = <&prog1>;
+ };
+ };
+
+ periphck {
+ compatible = "atmel,at91rm9200-clk-peripheral";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&mck>;
+
+ pioA_clk: pioA_clk {
+ #clock-cells = <0>;
+ reg = <2>;
+ };
+
+ pioB_clk: pioB_clk {
+ #clock-cells = <0>;
+ reg = <3>;
+ };
+
+ pioC_clk: pioC_clk {
+ #clock-cells = <0>;
+ reg = <4>;
+ };
+
+ adc_clk: adc_clk {
+ #clock-cells = <0>;
+ reg = <5>;
+ };
+
+ usart0_clk: usart0_clk {
+ #clock-cells = <0>;
+ reg = <6>;
+ };
+
+ usart1_clk: usart1_clk {
+ #clock-cells = <0>;
+ reg = <7>;
+ };
+
+ usart2_clk: usart2_clk {
+ #clock-cells = <0>;
+ reg = <8>;
+ };
+
+ mci0_clk: mci0_clk {
+ #clock-cells = <0>;
+ reg = <9>;
+ };
+
+ udc_clk: udc_clk {
+ #clock-cells = <0>;
+ reg = <10>;
+ };
+
+ twi0_clk: twi0_clk {
+ reg = <11>;
+ #clock-cells = <0>;
+ };
+
+ spi0_clk: spi0_clk {
+ #clock-cells = <0>;
+ reg = <12>;
+ };
+
+ spi1_clk: spi1_clk {
+ #clock-cells = <0>;
+ reg = <13>;
+ };
+
+ ssc0_clk: ssc0_clk {
+ #clock-cells = <0>;
+ reg = <14>;
+ };
+
+ tc0_clk: tc0_clk {
+ #clock-cells = <0>;
+ reg = <17>;
+ };
+
+ tc1_clk: tc1_clk {
+ #clock-cells = <0>;
+ reg = <18>;
+ };
+
+ tc2_clk: tc2_clk {
+ #clock-cells = <0>;
+ reg = <19>;
+ };
+
+ ohci_clk: ohci_clk {
+ #clock-cells = <0>;
+ reg = <20>;
+ };
+
+ macb0_clk: macb0_clk {
+ #clock-cells = <0>;
+ reg = <21>;
+ };
+
+ isi_clk: isi_clk {
+ #clock-cells = <0>;
+ reg = <22>;
+ };
+
+ usart3_clk: usart3_clk {
+ #clock-cells = <0>;
+ reg = <23>;
+ };
+
+ uart0_clk: uart0_clk {
+ #clock-cells = <0>;
+ reg = <24>;
+ };
+
+ uart1_clk: uart1_clk {
+ #clock-cells = <0>;
+ reg = <25>;
+ };
+
+ tc3_clk: tc3_clk {
+ #clock-cells = <0>;
+ reg = <26>;
+ };
+
+ tc4_clk: tc4_clk {
+ #clock-cells = <0>;
+ reg = <27>;
+ };
+
+ tc5_clk: tc5_clk {
+ #clock-cells = <0>;
+ reg = <28>;
+ };
+ };
};
rstc@fffffd00 {
@@ -92,6 +365,7 @@
compatible = "atmel,at91sam9260-pit";
reg = <0xfffffd30 0xf>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&mck>;
};
tcb0: timer@fffa0000 {
@@ -100,6 +374,8 @@
interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0
18 IRQ_TYPE_LEVEL_HIGH 0
19 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&tc0_clk>, <&tc1_clk>, <&tc2_clk>;
+ clock-names = "t0_clk", "t1_clk", "t2_clk";
};
tcb1: timer@fffdc000 {
@@ -108,6 +384,8 @@
interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0
27 IRQ_TYPE_LEVEL_HIGH 0
28 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&tc3_clk>, <&tc4_clk>, <&tc5_clk>;
+ clock-names = "t0_clk", "t1_clk", "t2_clk";
};
pinctrl@fffff400 {
@@ -443,6 +721,7 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
+ clocks = <&pioA_clk>;
};
pioB: gpio@fffff600 {
@@ -453,6 +732,7 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
+ clocks = <&pioB_clk>;
};
pioC: gpio@fffff800 {
@@ -463,6 +743,7 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
+ clocks = <&pioC_clk>;
};
};
@@ -472,6 +753,8 @@
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_dbgu>;
+ clocks = <&mck>;
+ clock-names = "usart";
status = "disabled";
};
@@ -483,6 +766,8 @@
atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart0>;
+ clocks = <&usart0_clk>;
+ clock-names = "usart";
status = "disabled";
};
@@ -494,6 +779,8 @@
atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart1>;
+ clocks = <&usart1_clk>;
+ clock-names = "usart";
status = "disabled";
};
@@ -505,6 +792,8 @@
atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart2>;
+ clocks = <&usart2_clk>;
+ clock-names = "usart";
status = "disabled";
};
@@ -516,6 +805,8 @@
atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart3>;
+ clocks = <&usart3_clk>;
+ clock-names = "usart";
status = "disabled";
};
@@ -527,6 +818,8 @@
atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart0>;
+ clocks = <&uart0_clk>;
+ clock-names = "usart";
status = "disabled";
};
@@ -538,6 +831,8 @@
atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
+ clocks = <&uart1_clk>;
+ clock-names = "usart";
status = "disabled";
};
@@ -547,6 +842,8 @@
interrupts = <21 IRQ_TYPE_LEVEL_HIGH 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_macb_rmii>;
+ clocks = <&macb0_clk>, <&macb0_clk>;
+ clock-names = "hclk", "pclk";
status = "disabled";
};
@@ -554,6 +851,8 @@
compatible = "atmel,at91rm9200-udc";
reg = <0xfffa4000 0x4000>;
interrupts = <10 IRQ_TYPE_LEVEL_HIGH 2>;
+ clocks = <&udc_clk>, <&udpck>;
+ clock-names = "pclk", "hclk";
status = "disabled";
};
@@ -563,6 +862,7 @@
interrupts = <11 IRQ_TYPE_LEVEL_HIGH 6>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&twi0_clk>;
status = "disabled";
};
@@ -573,6 +873,8 @@
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
+ clocks = <&mci0_clk>;
+ clock-names = "mci_clk";
status = "disabled";
};
@@ -582,6 +884,8 @@
interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+ clocks = <&ssc0_clk>;
+ clock-names = "pclk";
status = "disabled";
};
@@ -593,6 +897,8 @@
interrupts = <12 IRQ_TYPE_LEVEL_HIGH 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi0>;
+ clocks = <&spi0_clk>;
+ clock-names = "spi_clk";
status = "