diff options
1000 files changed, 41293 insertions, 7126 deletions
diff --git a/Documentation/boards/efi.rst b/Documentation/boards/efi.rst index 3da2daac99..2178c9ab42 100644 --- a/Documentation/boards/efi.rst +++ b/Documentation/boards/efi.rst @@ -43,7 +43,7 @@ name it ``BOOTx64.EFI`` on 64bit architectures and ``BOOTIA32.EFI`` on 32bit architectures. Switching to USB boot in the BIOS should then be enough to start barebox via USB. Some BIOSes allow to specify a path to a binary to be executed, others have a "start UEFI shell" entry which executes -EFI/Shellx64.efi on the :term:`ESP`. This can be a barebox binary aswell. +EFI/Shellx64.efi on the :term:`ESP`. This can be a barebox binary as well. To use the :ref:`state_framework`, the describing devicetree file ``state.dtb`` has to be put into the ``EFI/barebox/`` directory. Supported backends for EFI are raw partitions that can be discovered via a @@ -200,7 +200,7 @@ EFI device paths In EFI each device can be pointed to using a device path. Device paths have multiple components. The toplevel component on X86 systems will be the PCI root complex, on -other systems this can be the physical memory space. Each component will now descrive +other systems this can be the physical memory space. Each component will now describe how to find the child component on the parent bus. Additional device path nodes can describe network addresses or filenames on partitions. Device paths have a binary representation and a clearly defined string representation. These characteristics make @@ -274,7 +274,7 @@ Network Protocol GUID: EFI_GUID( 0xA19832B9, 0xAC25, 0x11D3, 0x9A, 0x2D, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D ) Matching between EFI devices and drivers is done based on the Protocol GUIDs, so -whenever a driver GUID matches one of the GUIDs a device imeplements the drivers +whenever a driver GUID matches one of the GUIDs a device implements the drivers probe function is called. .. _efi_building_edk2: diff --git a/Documentation/boards/imx/zii-imx7d-dev/openocd.cfg b/Documentation/boards/imx/zii-imx7d-dev/openocd.cfg index f971c3fb21..6056b89578 100644 --- a/Documentation/boards/imx/zii-imx7d-dev/openocd.cfg +++ b/Documentation/boards/imx/zii-imx7d-dev/openocd.cfg @@ -138,6 +138,12 @@ proc start_barebox { } { resume $MX7_DDR_BASE_ADDR } +# disable internal reset-assert handling to +# allow reset-init to work +$_TARGETNAME.0 configure -event reset-assert "" +$_TARGETNAME.1 configure -event reset-assert "" +$_TARGETNAME_2 configure -event reset-assert "" + # hook the init function into the reset-init event ${_TARGETNAME}.0 configure -event reset-init { board_init } diff --git a/Documentation/boards/imx/zii-vf610-dev/openocd.cfg b/Documentation/boards/imx/zii-vf610-dev/openocd.cfg index 222f487117..5127c7623d 100644 --- a/Documentation/boards/imx/zii-vf610-dev/openocd.cfg +++ b/Documentation/boards/imx/zii-vf610-dev/openocd.cfg @@ -258,6 +258,7 @@ proc safe_reset {} { proc start_barebox { } { set VF610_DDR_BASE_ADDR 0x80000000 echo "Bootstrap: Loading Barebox" + targets vf610.cpu0 halt load_image images/barebox-zii-vf610-dev.img $VF610_DDR_BASE_ADDR bin arm core_state arm diff --git a/Documentation/conf.py b/Documentation/conf.py index ec6ec0470b..bcd8633c91 100644 --- a/Documentation/conf.py +++ b/Documentation/conf.py @@ -53,9 +53,9 @@ copyright = u'2014, The barebox project' # The short X.Y version. import os -version = os.environ["KERNELVERSION"] +version = os.environ.get("KERNELVERSION", 'unknown version') # The full version, including alpha/beta/rc tags. -release = os.environ["KERNELRELEASE"] +release = os.environ.get("KERNELRELEASE", 'unknown release') # The language for content autogenerated by Sphinx. Refer to documentation # for a list of supported languages. @@ -1,5 +1,5 @@ VERSION = 2019 -PATCHLEVEL = 07 +PATCHLEVEL = 09 SUBLEVEL = 0 EXTRAVERSION = NAME = None @@ -329,6 +329,8 @@ export CFLAGS CFLAGS_KERNEL export AFLAGS AFLAGS_KERNEL export LDFLAGS_barebox +export CFLAGS_UBSAN + # Files to ignore in find ... statements RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o -name CVS -o -name .pc -o -name .hg -o -name .git \) -prune -o @@ -489,6 +491,8 @@ CFLAGS += $(call cc-option,-Wno-pointer-sign,) # change __FILE__ to the relative path from the srctree CFLAGS += $(call cc-option,-fmacro-prefix-map=$(srctree)/=) +include $(srctree)/scripts/Makefile.ubsan + # KBUILD_IMAGE: Default barebox image to build # Depending on the architecture, this can be either compressed or not. # It will also include any necessary headers to be bootable. diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 931a16599f..b227bb78b6 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -417,12 +417,14 @@ config ARM_OPTIMZED_STRING_FUNCTIONS increase your binary size. config ARM_EXCEPTIONS + select ARCH_HAS_DATA_ABORT_MASK bool "enable arm exception handling support" default y config ARM_UNWIND bool "enable stack unwinding support" depends on AEABI + select ARCH_HAS_STACK_DUMP help This option enables stack unwinding support in barebox using the information automatically generated by the diff --git a/arch/arm/boards/animeo_ip/lowlevel.c b/arch/arm/boards/animeo_ip/lowlevel.c index 25352672d7..7f52f824df 100644 --- a/arch/arm/boards/animeo_ip/lowlevel.c +++ b/arch/arm/boards/animeo_ip/lowlevel.c @@ -18,7 +18,7 @@ void __naked __bare_init barebox_arm_reset_vector(uint32_t r0, uint32_t r1, uint { arm_cpu_lowlevel_init(); - arm_setup_stack(AT91SAM9260_SRAM_BASE + AT91SAM9260_SRAM_SIZE - 16); + arm_setup_stack(AT91SAM9260_SRAM_BASE + AT91SAM9260_SRAM_SIZE); barebox_arm_entry(AT91_CHIPSELECT_1, at91_get_sdram_size(IOMEM(AT91SAM9260_BASE_SDRAMC)), diff --git a/arch/arm/boards/at91sam9260ek/lowlevel.c b/arch/arm/boards/at91sam9260ek/lowlevel.c index 25352672d7..7f52f824df 100644 --- a/arch/arm/boards/at91sam9260ek/lowlevel.c +++ b/arch/arm/boards/at91sam9260ek/lowlevel.c @@ -18,7 +18,7 @@ void __naked __bare_init barebox_arm_reset_vector(uint32_t r0, uint32_t r1, uint { arm_cpu_lowlevel_init(); - arm_setup_stack(AT91SAM9260_SRAM_BASE + AT91SAM9260_SRAM_SIZE - 16); + arm_setup_stack(AT91SAM9260_SRAM_BASE + AT91SAM9260_SRAM_SIZE); barebox_arm_entry(AT91_CHIPSELECT_1, at91_get_sdram_size(IOMEM(AT91SAM9260_BASE_SDRAMC)), diff --git a/arch/arm/boards/at91sam9261ek/lowlevel_init.c b/arch/arm/boards/at91sam9261ek/lowlevel_init.c index 0d7f6d6590..bb9b905c65 100644 --- a/arch/arm/boards/at91sam9261ek/lowlevel_init.c +++ b/arch/arm/boards/at91sam9261ek/lowlevel_init.c @@ -121,7 +121,7 @@ void __naked __bare_init barebox_arm_reset_vector(uint32_t r0, uint32_t r1, uint { arm_cpu_lowlevel_init(); - arm_setup_stack(AT91SAM9261_SRAM_BASE + AT91SAM9261_SRAM_SIZE - 16); + arm_setup_stack(AT91SAM9261_SRAM_BASE + AT91SAM9261_SRAM_SIZE); at91sam9261ek_init(); } diff --git a/arch/arm/boards/at91sam9263ek/lowlevel_init.c b/arch/arm/boards/at91sam9263ek/lowlevel_init.c index f5d68cd7e8..ba0ae39c7f 100644 --- a/arch/arm/boards/at91sam9263ek/lowlevel_init.c +++ b/arch/arm/boards/at91sam9263ek/lowlevel_init.c @@ -123,7 +123,7 @@ ENTRY_FUNCTION(start_at91sam9263ek, r0, r1, r2) arm_cpu_lowlevel_init(); - arm_setup_stack(AT91SAM9263_SRAM0_BASE + AT91SAM9263_SRAM0_SIZE - 16); + arm_setup_stack(AT91SAM9263_SRAM0_BASE + AT91SAM9263_SRAM0_SIZE); if (IS_ENABLED(CONFIG_MACH_AT91SAM9263EK_DT)) fdt = __dtb_at91sam9263ek_start + get_runtime_offset(); diff --git a/arch/arm/boards/at91sam9m10g45ek/lowlevel.c b/arch/arm/boards/at91sam9m10g45ek/lowlevel.c index 1d83cdf0bf..0f3a035d1d 100644 --- a/arch/arm/boards/at91sam9m10g45ek/lowlevel.c +++ b/arch/arm/boards/at91sam9m10g45ek/lowlevel.c @@ -17,7 +17,7 @@ void __naked __bare_init barebox_arm_reset_vector(uint32_t r0, uint32_t r1, uint { arm_cpu_lowlevel_init(); - arm_setup_stack(AT91SAM9G45_SRAM_BASE + AT91SAM9G45_SRAM_SIZE - 16); + arm_setup_stack(AT91SAM9G45_SRAM_BASE + AT91SAM9G45_SRAM_SIZE); barebox_arm_entry(AT91_CHIPSELECT_6, at91sam9g45_get_ddram_size(1), NULL); diff --git a/arch/arm/boards/at91sam9m10ihd/lowlevel.c b/arch/arm/boards/at91sam9m10ihd/lowlevel.c index 4ccbb93557..e07ff892cd 100644 --- a/arch/arm/boards/at91sam9m10ihd/lowlevel.c +++ b/arch/arm/boards/at91sam9m10ihd/lowlevel.c @@ -18,7 +18,7 @@ void __naked __bare_init barebox_arm_reset_vector(uint32_t r0, uint32_t r1, uint { arm_cpu_lowlevel_init(); - arm_setup_stack(AT91SAM9G45_SRAM_BASE + AT91SAM9G45_SRAM_SIZE - 16); + arm_setup_stack(AT91SAM9G45_SRAM_BASE + AT91SAM9G45_SRAM_SIZE); barebox_arm_entry(AT91_CHIPSELECT_6, at91sam9g45_get_ddram_size(1), NULL); diff --git a/arch/arm/boards/at91sam9n12ek/lowlevel.c b/arch/arm/boards/at91sam9n12ek/lowlevel.c index f57e439b9e..5bc18f8fca 100644 --- a/arch/arm/boards/at91sam9n12ek/lowlevel.c +++ b/arch/arm/boards/at91sam9n12ek/lowlevel.c @@ -17,7 +17,7 @@ void __naked __bare_init barebox_arm_reset_vector(uint32_t r0, uint32_t r1, uint { arm_cpu_lowlevel_init(); - arm_setup_stack(AT91SAM9N12_SRAM_BASE + AT91SAM9N12_SRAM_SIZE - 16); + arm_setup_stack(AT91SAM9N12_SRAM_BASE + AT91SAM9N12_SRAM_SIZE); barebox_arm_entry(AT91_CHIPSELECT_1, at91sam9n12_get_ddram_size(), NULL); diff --git a/arch/arm/boards/at91sam9x5ek/lowlevel.c b/arch/arm/boards/at91sam9x5ek/lowlevel.c index 50119108c9..9033597e7c 100644 --- a/arch/arm/boards/at91sam9x5ek/lowlevel.c +++ b/arch/arm/boards/at91sam9x5ek/lowlevel.c @@ -14,7 +14,7 @@ ENTRY_FUNCTION(start_at91sam9x5ek, r0, r1, r2) void *fdt; arm_cpu_lowlevel_init(); - arm_setup_stack(AT91SAM9X5_SRAM_BASE + AT91SAM9X5_SRAM_SIZE - 16); + arm_setup_stack(AT91SAM9X5_SRAM_BASE + AT91SAM9X5_SRAM_SIZE); fdt = __dtb_at91sam9x5ek_start + get_runtime_offset(); diff --git a/arch/arm/boards/ccxmx51/lowlevel.c b/arch/arm/boards/ccxmx51/lowlevel.c index 462c22e284..adcb30a7ff 100644 --- a/arch/arm/boards/ccxmx51/lowlevel.c +++ b/arch/arm/boards/ccxmx51/lowlevel.c @@ -15,7 +15,7 @@ ENTRY_FUNCTION(start_ccxmx51, r0, r1, r2) imx5_cpu_lowlevel_init(); - arm_setup_stack(0x20000000 - 16); + arm_setup_stack(0x20000000); fdt = __dtb_imx51_ccxmx51_start + get_runtime_offset(); diff --git a/arch/arm/boards/ccxmx53/lowlevel.c b/arch/arm/boards/ccxmx53/lowlevel.c index c27e33098c..1d2d8c6d90 100644 --- a/arch/arm/boards/ccxmx53/lowlevel.c +++ b/arch/arm/boards/ccxmx53/lowlevel.c @@ -37,7 +37,7 @@ ENTRY_FUNCTION(start_ccxmx53_512mb, r0, r1, r2) void *fdt; imx5_cpu_lowlevel_init(); - arm_setup_stack(MX53_IRAM_BASE_ADDR + MX53_IRAM_SIZE - 8); + arm_setup_stack(MX53_IRAM_BASE_ADDR + MX53_IRAM_SIZE); IMD_USED(ccxmx53_memsize_SZ_512M); @@ -51,7 +51,7 @@ ENTRY_FUNCTION(start_ccxmx53_1gib, r0, r1, r2) void *fdt; imx5_cpu_lowlevel_init(); - arm_setup_stack(MX53_IRAM_BASE_ADDR + MX53_IRAM_SIZE - 8); + arm_setup_stack(MX53_IRAM_BASE_ADDR + MX53_IRAM_SIZE); IMD_USED(ccxmx53_memsize_SZ_1G); diff --git a/arch/arm/boards/datamodul-edm-qmx6/lowlevel.c b/arch/arm/boards/datamodul-edm-qmx6/lowlevel.c index 3ecdb66bc5..23074326b5 100644 --- a/arch/arm/boards/datamodul-edm-qmx6/lowlevel.c +++ b/arch/arm/boards/datamodul-edm-qmx6/lowlevel.c @@ -145,7 +145,7 @@ ENTRY_FUNCTION(start_imx6_realq7, r0, r1, r2) imx6_cpu_lowlevel_init(); - arm_setup_stack(0x00940000 - 8); + arm_setup_stack(0x00940000); fdt = __dtb_imx6q_dmo_edmqmx6_start + get_runtime_offset(); diff --git a/arch/arm/boards/dfi-fs700-m60/lowlevel.c b/arch/arm/boards/dfi-fs700-m60/lowlevel.c index b419228505..520ed4c46b 100644 --- a/arch/arm/boards/dfi-fs700-m60/lowlevel.c +++ b/arch/arm/boards/dfi-fs700-m60/lowlevel.c @@ -108,7 +108,7 @@ ENTRY_FUNCTION(start_imx6q_dfi_fs700_m60_6q_nanya, r0, r1, r2) imx6_cpu_lowlevel_init(); - arm_setup_stack(0x00940000 - 8); + arm_setup_stack(0x00940000); for (i = 0x68; i <= 0x80; i += 4) writel(0xffffffff, MX6_CCM_BASE_ADDR + i); @@ -127,7 +127,7 @@ ENTRY_FUNCTION(start_imx6q_dfi_fs700_m60_6q_micron, r0, r1, r2) imx6_cpu_lowlevel_init(); - arm_setup_stack(0x00940000 - 8); + arm_setup_stack(0x00940000); for (i = 0x68; i <= 0x80; i += 4) writel(0xffffffff, MX6_CCM_BASE_ADDR + i); @@ -150,7 +150,7 @@ ENTRY_FUNCTION(start_imx6dl_dfi_fs700_m60_6s, r0, r1, r2) imx6_cpu_lowlevel_init(); - arm_setup_stack(0x00920000 - 8); + arm_setup_stack(0x00920000); for (i = 0x68; i <= 0x80; i += 4) writel(0xffffffff, MX6_CCM_BASE_ADDR + i); diff --git a/arch/arm/boards/digi-ccimx6ulsom/lowlevel.c b/arch/arm/boards/digi-ccimx6ulsom/lowlevel.c index ac76a843ac..7bf1db8120 100644 --- a/arch/arm/boards/digi-ccimx6ulsom/lowlevel.c +++ b/arch/arm/boards/digi-ccimx6ulsom/lowlevel.c @@ -13,7 +13,7 @@ ENTRY_FUNCTION(start_imx6ul_ccimx6ulsbcpro, r0, r1, r2) imx6ul_cpu_lowlevel_init(); - arm_setup_stack(0x00910000 - 8); + arm_setup_stack(0x00910000); arm_early_mmu_cache_invalidate(); diff --git a/arch/arm/boards/dss11/lowlevel.c b/arch/arm/boards/dss11/lowlevel.c index 25352672d7..7f52f824df 100644 --- a/arch/arm/boards/dss11/lowlevel.c +++ b/arch/arm/boards/dss11/lowlevel.c @@ -18,7 +18,7 @@ void __naked __bare_init barebox_arm_reset_vector(uint32_t r0, uint32_t r1, uint { arm_cpu_lowlevel_init(); - arm_setup_stack(AT91SAM9260_SRAM_BASE + AT91SAM9260_SRAM_SIZE - 16); + arm_setup_stack(AT91SAM9260_SRAM_BASE + AT91SAM9260_SRAM_SIZE); barebox_arm_entry(AT91_CHIPSELECT_1, at91_get_sdram_size(IOMEM(AT91SAM9260_BASE_SDRAMC)), diff --git a/arch/arm/boards/efika-mx-smartbook/lowlevel.c b/arch/arm/boards/efika-mx-smartbook/lowlevel.c index 6da5bfaf55..3881678d85 100644 --- a/arch/arm/boards/efika-mx-smartbook/lowlevel.c +++ b/arch/arm/boards/efika-mx-smartbook/lowlevel.c @@ -12,7 +12,7 @@ ENTRY_FUNCTION(start_imx51_genesi_efikasb, r0, r1, r2) void *fdt; imx5_cpu_lowlevel_init(); - arm_setup_stack(0x20000000 - 16); + arm_setup_stack(0x20000000); imx51_init_lowlevel(800); fdt = __dtb_imx51_genesi_efika_sb_start + get_runtime_offset(); diff --git a/arch/arm/boards/eltec-hipercam/lowlevel.c b/arch/arm/boards/eltec-hipercam/lowlevel.c index b0d3155023..2f2cd9aab7 100644 --- a/arch/arm/boards/eltec-hipercam/lowlevel.c +++ b/arch/arm/boards/eltec-hipercam/lowlevel.c @@ -39,7 +39,7 @@ ENTRY_FUNCTION(start_imx6dl_eltec_hipercam, r0, r1, r2) imx6_cpu_lowlevel_init(); - arm_setup_stack(0x00940000 - 8); + arm_setup_stack(0x00940000); if (IS_ENABLED(CONFIG_DEBUG_LL)) setup_uart(); diff --git a/arch/arm/boards/eukrea_cpuimx25/lowlevel.c b/arch/arm/boards/eukrea_cpuimx25/lowlevel.c index 555dd44445..c16316d4a1 100644 --- a/arch/arm/boards/eukrea_cpuimx25/lowlevel.c +++ b/arch/arm/boards/eukrea_cpuimx25/lowlevel.c @@ -37,7 +37,7 @@ void __bare_init __naked barebox_arm_reset_vector(uint32_t r0, uint32_t r1, uint arm_cpu_lowlevel_init(); - arm_setup_stack(MX25_IRAM_BASE_ADDR + MX25_IRAM_SIZE - 12); + arm_setup_stack(MX25_IRAM_BASE_ADDR + MX25_IRAM_SIZE); /* restart the MPLL and wait until it's stable */ writel(readl(MX25_CCM_BASE_ADDR + MX25_CCM_CCTL) | (1 << 27), diff --git a/arch/arm/boards/eukrea_cpuimx35/lowlevel.c b/arch/arm/boards/eukrea_cpuimx35/lowlevel.c index be78b48bd0..ab5235f7f0 100644 --- a/arch/arm/boards/eukrea_cpuimx35/lowlevel.c +++ b/arch/arm/boards/eukrea_cpuimx35/lowlevel.c @@ -38,7 +38,7 @@ void __bare_init __naked barebox_arm_reset_vector(uint32_t r0, uint32_t r1, uint arm_cpu_lowlevel_init(); - arm_setup_stack(MX35_IRAM_BASE_ADDR + MX35_IRAM_SIZE - 8); + arm_setup_stack(MX35_IRAM_BASE_ADDR + MX35_IRAM_SIZE); r = get_cr(); r |= CR_Z; /* Flow prediction (Z) */ diff --git a/arch/arm/boards/eukrea_cpuimx51/lowlevel.c b/arch/arm/boards/eukrea_cpuimx51/lowlevel.c index e09f58e29c..6762fdad4b 100644 --- a/arch/arm/boards/eukrea_cpuimx51/lowlevel.c +++ b/arch/arm/boards/eukrea_cpuimx51/lowlevel.c @@ -6,6 +6,6 @@ void __naked barebox_arm_reset_vector(uint32_t r0, uint32_t r1, uint32_t r2) { imx5_cpu_lowlevel_init(); - arm_setup_stack(0x20000000 - 16); + arm_setup_stack(0x20000000); imx51_barebox_entry(NULL); } diff --git a/arch/arm/boards/freescale-mx51-babbage/lowlevel.c b/arch/arm/boards/freescale-mx51-babbage/lowlevel.c index f254db7b7b..e29a647daa 100644 --- a/arch/arm/boards/freescale-mx51-babbage/lowlevel.c +++ b/arch/arm/boards/freescale-mx51-babbage/lowlevel.c @@ -40,7 +40,7 @@ ENTRY_FUNCTION(start_imx51_babbage, r0, r1, r2) if (IS_ENABLED(CONFIG_DEBUG_LL)) setup_uart(); - arm_setup_stack(0x20000000 - 16); + arm_setup_stack(0x20000000); fdt = __dtb_imx51_babbage_start + get_runtime_offset(); diff --git a/arch/arm/boards/freescale-mx53-qsb/lowlevel.c b/arch/arm/boards/freescale-mx53-qsb/lowlevel.c index cfe01f7807..c9044011d5 100644 --- a/arch/arm/boards/freescale-mx53-qsb/lowlevel.c +++ b/arch/arm/boards/freescale-mx53-qsb/lowlevel.c @@ -13,7 +13,7 @@ ENTRY_FUNCTION(start_imx53_loco, r0, r1, r2) void *fdt; imx5_cpu_lowlevel_init(); - arm_setup_stack(MX53_IRAM_BASE_ADDR + MX53_IRAM_SIZE - 8); + arm_setup_stack(MX53_IRAM_BASE_ADDR + MX53_IRAM_SIZE); fdt = __dtb_imx53_qsb_start + get_runtime_offset(); @@ -27,7 +27,7 @@ ENTRY_FUNCTION(start_imx53_loco_r, r0, r1, r2) void *fdt; imx5_cpu_lowlevel_init(); - arm_setup_stack(MX53_IRAM_BASE_ADDR + MX53_IRAM_SIZE - 8); + arm_setup_stack(MX53_IRAM_BASE_ADDR + MX53_IRAM_SIZE); fdt = __dtb_imx53_qsrb_start + get_runtime_offset(); diff --git a/arch/arm/boards/freescale-mx53-smd/lowlevel.c b/arch/arm/boards/freescale-mx53-smd/lowlevel.c index c929d274f2..fffbfdf0ba 100644 --- a/arch/arm/boards/freescale-mx53-smd/lowlevel.c +++ b/arch/arm/boards/freescale-mx53-smd/lowlevel.c @@ -7,6 +7,6 @@ void __naked barebox_arm_reset_vector(uint32_t r0, uint32_t r1, uint32_t r2) { imx5_cpu_lowlevel_init(); - arm_setup_stack(MX53_IRAM_BASE_ADDR + MX53_IRAM_SIZE - 8); + arm_setup_stack(MX53_IRAM_BASE_ADDR + MX53_IRAM_SIZE); imx53_barebox_entry(NULL); } diff --git a/arch/arm/boards/freescale-mx53-vmx53/lowlevel.c b/arch/arm/boards/freescale-mx53-vmx53/lowlevel.c index aac784ca6e..ae94538c9e 100644 --- a/arch/arm/boards/freescale-mx53-vmx53/lowlevel.c +++ b/arch/arm/boards/freescale-mx53-vmx53/lowlevel.c @@ -11,7 +11,7 @@ ENTRY_FUNCTION(start_imx53_vmx53, r0, r1, r2) void *fdt; imx5_cpu_lowlevel_init(); - arm_setup_stack(0xf8020000 - 8); + arm_setup_stack(0xf8020000); fdt = __dtb_imx53_voipac_bsb_start + get_runtime_offset(); diff --git a/arch/arm/boards/grinn-liteboard/lowlevel.c b/arch/arm/boards/grinn-liteboard/lowlevel.c index 331ccc2283..bb2e09016e 100644 --- a/arch/arm/boards/grinn-liteboard/lowlevel.c +++ b/arch/arm/boards/grinn-liteboard/lowlevel.c @@ -58,7 +58,7 @@ static void __noreturn start_imx6_liteboard(void) { imx6ul_cpu_lowlevel_init(); - arm_setup_stack(0x00910000 - 8); + arm_setup_stack(0x00910000); arm_early_mmu_cache_invalidate(); diff --git a/arch/arm/boards/guf-cupid/lowlevel.c b/arch/arm/boards/guf-cupid/lowlevel.c index e84ae2c415..0d7cfb618c 100644 --- a/arch/arm/boards/guf-cupid/lowlevel.c +++ b/arch/arm/boards/guf-cupid/lowlevel.c @@ -165,7 +165,7 @@ void __bare_init __naked barebox_arm_reset_vector(uint32_t r0, uint32_t r1, uint arm_cpu_lowlevel_init(); - arm_setup_stack(0x10000000 + 128 * 1024 - 16); + arm_setup_stack(0x10000000 + 128 * 1024); /* * ARM1136 init diff --git a/arch/arm/boards/guf-neso/lowlevel.c b/arch/arm/boards/guf-neso/lowlevel.c index 6c22784599..20f48be7dd 100644 --- a/arch/arm/boards/guf-neso/lowlevel.c +++ b/arch/arm/boards/guf-neso/lowlevel.c @@ -39,7 +39,7 @@ void __bare_init __naked barebox_arm_reset_vector(uint32_t r0, uint32_t r1, uint arm_cpu_lowlevel_init(); - arm_setup_stack(MX27_IRAM_BASE_ADDR + MX27_IRAM_SIZE - 8); + arm_setup_stack(MX27_IRAM_BASE_ADDR + MX27_IRAM_SIZE); /* ahb lite ip interface */ writel(0x20040304, MX27_AIPI_BASE_ADDR + MX27_AIPI1_PSR0); diff --git a/arch/arm/boards/guf-santaro/lowlevel.c b/arch/arm/boards/guf-santaro/lowlevel.c index 1502bb3d38..30c5e9054a 100644 --- a/arch/arm/boards/guf-santaro/lowlevel.c +++ b/arch/arm/boards/guf-santaro/lowlevel.c @@ -35,7 +35,7 @@ ENTRY_FUNCTION(start_imx6q_guf_santaro, r0, r1, r2) { imx6_cpu_lowlevel_init(); - arm_setup_stack(0x00920000 - 8); + arm_setup_stack(0x00920000); arm_early_mmu_cache_invalidate(); diff --git a/arch/arm/boards/guf-vincell/lowlevel.c b/arch/arm/boards/guf-vincell/lowlevel.c index 715e8b386f..04060b2003 100644 --- a/arch/arm/boards/guf-vincell/lowlevel.c +++ b/arch/arm/boards/guf-vincell/lowlevel.c @@ -21,7 +21,7 @@ static noinline void imx53_guf_vincell_init(void *fdt) void __iomem *ccm = (void *)MX53_CCM_BASE_ADDR; void __iomem *uart = IOMEM(MX53_UART2_BASE_ADDR); - arm_setup_stack(MX53_IRAM_BASE_ADDR + MX53_IRAM_SIZE - 8); + arm_setup_stack(MX53_IRAM_BASE_ADDR + MX53_IRAM_SIZE); writel(0x0088494c, ccm + MX5_CCM_CBCDR); writel(0x02b12f0a, ccm + MX5_CCM_CSCMR2); diff --git a/arch/arm/boards/haba-knx/lowlevel.c b/arch/arm/boards/haba-knx/lowlevel.c index 25352672d7..7f52f824df 100644 --- a/arch/arm/boards/haba-knx/lowlevel.c +++ b/arch/arm/boards/haba-knx/lowlevel.c @@ -18,7 +18,7 @@ void __naked __bare_init barebox_arm_reset_vector(uint32_t r0, uint32_t r1, uint { arm_cpu_lowlevel_init(); - arm_setup_stack(AT91SAM9260_SRAM_BASE + AT91SAM9260_SRAM_SIZE - 16); + arm_setup_stack(AT91SAM9260_SRAM_BASE + AT91SAM9260_SRAM_SIZE); barebox_arm_entry(AT91_CHIPSELECT_1, at91_get_sdram_size(IOMEM(AT91SAM9260_BASE_SDRAMC)), diff --git a/arch/arm/boards/karo-tx25/lowlevel.c b/arch/arm/boards/karo-tx25/lowlevel.c index 3bbc930931..f79cd91640 100644 --- a/arch/arm/boards/karo-tx25/lowlevel.c +++ b/arch/arm/boards/karo-tx25/lowlevel.c @@ -168,7 +168,7 @@ ENTRY_FUNCTION(start_imx25_karo_tx25, r0, r1, r2) { void *fdt; - arm_setup_stack(MX25_IRAM_BASE_ADDR + MX25_IRAM_SIZE - 8); + arm_setup_stack(MX25_IRAM_BASE_ADDR + MX25_IRAM_SIZE); fdt = __dtb_imx25_karo_tx25_start + get_runtime_offset(); diff --git a/arch/arm/boards/karo-tx51/lowlevel.c b/arch/arm/boards/karo-tx51/lowlevel.c index e09f58e29c..6762fdad4b 100644 --- a/arch/arm/boards/karo-tx51/lowlevel.c +++ b/arch/arm/boards/karo-tx51/lowlevel.c @@ -6,6 +6,6 @@ void __naked barebox_arm_reset_vector(uint32_t r0, uint32_t r1, uint32_t r2) { imx5_cpu_lowlevel_init(); - arm_setup_stack(0x20000000 - 16); + arm_setup_stack(0x20000000); imx51_barebox_entry(NULL); } diff --git a/arch/arm/boards/karo-tx53/lowlevel.c b/arch/arm/boards/karo-tx53/lowlevel.c index a0bce8a788..230f60ebd9 100644 --- a/arch/arm/boards/karo-tx53/lowlevel.c +++ b/arch/arm/boards/karo-tx53/lowlevel.c @@ -37,7 +37,7 @@ static void __imx53_tx53_init(int is_xx30) setup_c(); barrier(); - arm_setup_stack(MX53_IRAM_BASE_ADDR + MX53_IRAM_SIZE - 8); + arm_setup_stack(MX53_IRAM_BASE_ADDR + MX53_IRAM_SIZE); if (is_xx30) { imx53_init_lowlevel_early(800); diff --git a/arch/arm/boards/karo-tx6x/lowlevel.c b/arch/arm/boards/karo-tx6x/lowlevel.c index 7b58a496ef..f0ddac284c 100644 --- a/arch/arm/boards/karo-tx6x/lowlevel.c +++ b/arch/arm/boards/karo-tx6x/lowlevel.c @@ -46,7 +46,7 @@ ENTRY_FUNCTION(start_imx6dl_tx6x_512m, r0, r1, r2) imx6_cpu_lowlevel_init(); - arm_setup_stack(0x00920000 - 8); + arm_setup_stack(0x00920000); IMD_USED(tx6x_mx6_memsize_512M); @@ -66,7 +66,7 @@ ENTRY_FUNCTION(start_imx6dl_tx6x_1g, r0, r1, r2) imx6_cpu_lowlevel_init(); - arm_setup_stack(0x00920000 - 8); + arm_setup_stack(0x00920000); IMD_USED(tx6x_mx6_memsize_1G); @@ -86,7 +86,7 @@ ENTRY_FUNCTION(start_imx6q_tx6x_1g, r0, r1, r2) imx6_cpu_lowlevel_init(); - arm_setup_stack(0x00920000 - 8); + arm_setup_stack(0x00920000); IMD_USED(tx6x_mx6_memsize_1G); @@ -106,7 +106,7 @@ ENTRY_FUNCTION(start_imx6q_tx6x_2g, r0, r1, r2) imx6_cpu_lowlevel_init(); - arm_setup_stack(0x00920000 - 8); + arm_setup_stack(0x00920000); IMD_USED(tx6x_mx6_memsize_2G); diff --git a/arch/arm/boards/kindle-mx50/lowlevel.c b/arch/arm/boards/kindle-mx50/lowlevel.c index 20f86c8fcb..992d1fd1a8 100644 --- a/arch/arm/boards/kindle-mx50/lowlevel.c +++ b/arch/arm/boards/kindle-mx50/lowlevel.c @@ -18,7 +18,7 @@ ENTRY_FUNCTION(start_imx50_kindle_d01100, r0, r1, r2) void *fdt; imx5_cpu_lowlevel_init(); - arm_setup_stack(MX50_IRAM_BASE_ADDR + MX50_IRAM_SIZE - 8); + arm_setup_stack(MX50_IRAM_BASE_ADDR + MX50_IRAM_SIZE); fdt = __dtb_imx50_kindle_d01100_start + get_runtime_offset(); @@ -30,7 +30,7 @@ ENTRY_FUNCTION(start_imx50_kindle_d01200, r0, r1, r2) void *fdt; imx5_cpu_lowlevel_init(); - arm_setup_stack(MX50_IRAM_BASE_ADDR + MX50_IRAM_SIZE - 8); + arm_setup_stack(MX50_IRAM_BASE_ADDR + MX50_IRAM_SIZE); fdt = __dtb_imx50_kindle_d01200_start + get_runtime_offset(); @@ -42,7 +42,7 @@ ENTRY_FUNCTION(start_imx50_kindle_ey21, r0, r1, r2) void *fdt; imx5_cpu_lowlevel_init(); - arm_setup_stack(MX50_IRAM_BASE_ADDR + MX50_IRAM_SIZE - 8); + arm_setup_stack(MX50_IRAM_BASE_ADDR + MX50_IRAM_SIZE); fdt = __dtb_imx50_kindle_ey21_start + get_runtime_offset(); diff --git a/arch/arm/boards/kindle3/lowlevel.c b/arch/arm/boards/kindle3/lowlevel.c index 689767f8d6..19b95fc376 100644 --- a/arch/arm/boards/kindle3/lowlevel.c +++ b/arch/arm/boards/kindle3/lowlevel.c @@ -39,7 +39,7 @@ void __bare_init __naked barebox_arm_reset_vector(uint32_t r0, uint32_t r1, uint arm_cpu_lowlevel_init(); - arm_setup_stack(MX35_IRAM_BASE_ADDR + MX35_IRAM_SIZE - 8); + arm_setup_stack(MX35_IRAM_BASE_ADDR + MX35_IRAM_SIZE); r = get_cr(); r |= CR_Z; /* Flow prediction (Z) */ diff --git a/arch/arm/boards/kontron-samx6i/lowlevel.c b/arch/arm/boards/kontron-samx6i/lowlevel.c index 9742469e20..afb7372323 100644 --- a/arch/arm/boards/kontron-samx6i/lowlevel.c +++ b/arch/arm/boards/kontron-samx6i/lowlevel.c @@ -42,7 +42,7 @@ static void __noreturn start_imx6_samx6i_common(void *fdt_blob_fixed_offset) size = samx6i_get_size(); imx6_cpu_lowlevel_init(); - arm_setup_stack(0x00920000 - 8); + arm_setup_stack(0x00920000); if (IS_ENABLED(CONFIG_DEBUG_LL)) setup_uart(); diff --git a/arch/arm/boards/microchip-ksz9477-evb/lowlevel.c b/arch/arm/boards/microchip-ksz9477-evb/lowlevel.c index 639958a459..0ce2b299ed 100644 --- a/arch/arm/boards/microchip-ksz9477-evb/lowlevel.c +++ b/arch/arm/boards/microchip-ksz9477-evb/lowlevel.c @@ -20,7 +20,7 @@ ENTRY_FUNCTION(start_sama5d3_xplained_ung8071, r0, r1, r2) arm_cpu_lowlevel_init(); - arm_setup_stack(SAMA5D3_SRAM_BASE + SAMA5D3_SRAM_SIZE - 16); + arm_setup_stack(SAMA5D3_SRAM_BASE + SAMA5D3_SRAM_SIZE); fdt = __dtb_at91_microchip_ksz9477_evb_start + get_runtime_offset(); diff --git a/arch/arm/boards/mx31moboard/lowlevel.c b/arch/arm/boards/mx31moboard/lowlevel.c index c93f76265c..307975d78c 100644 --- a/arch/arm/boards/mx31moboard/lowlevel.c +++ b/arch/arm/boards/mx31moboard/lowlevel.c @@ -107,7 +107,7 @@ void __bare_init __naked barebox_arm_reset_vector(uint32_t r0, uint32_t r1, uint arm_cpu_lowlevel_init(); /* Temporary stack location in internal SRAM */ - arm_setup_stack(MX31_IRAM_BASE_ADDR + MX31_IRAM_SIZE - 8); + arm_setup_stack(MX31_IRAM_BASE_ADDR + MX31_IRAM_SIZE); mx31moboard_startup(); } diff --git a/arch/arm/boards/nxp-imx6ull-evk/lowlevel.c b/arch/arm/boards/nxp-imx6ull-evk/lowlevel.c index bb2e3623dc..cc0b98e1d8 100644 --- a/arch/arm/boards/nxp-imx6ull-evk/lowlevel.c +++ b/arch/arm/boards/nxp-imx6ull-evk/lowlevel.c @@ -56,7 +56,7 @@ ENTRY_FUNCTION(start_nxp_imx6ull_evk, r0, r1, r2) imx6ul_cpu_lowlevel_init(); - arm_setup_stack(0x00910000 - 8); + arm_setup_stack(0x00910000); arm_early_mmu_cache_invalidate(); diff --git a/arch/arm/boards/nxp-imx8mq-evk/Makefile b/arch/arm/boards/nxp-imx8mq-evk/Makefile index 7907de411f..2995f06f0f 100644 --- a/arch/arm/boards/nxp-imx8mq-evk/Makefile +++ b/arch/arm/boards/nxp-imx8mq-evk/Makefile @@ -1,2 +1,2 @@ obj-y += board.o -lwl-y += lowlevel.o ddr_init.o ddrphy_train.o trampoline.o +lwl-y += lowlevel.o ddr_init.o ddrphy_train.o diff --git a/arch/arm/boards/nxp-imx8mq-evk/lowlevel.c b/arch/arm/boards/nxp-imx8mq-evk/lowlevel.c index a74171e5e5..9d060fb589 100644 --- a/arch/arm/boards/nxp-imx8mq-evk/lowlevel.c +++ b/arch/arm/boards/nxp-imx8mq-evk/lowlevel.c @@ -56,27 +56,6 @@ static void nxp_imx8mq_evk_sram_setup(void) ddr_init(); } -extern unsigned char trampoline_start[]; -extern unsigned char trampoline_end[]; - -static void nxp_imx8mq_evk_install_tfa_trampoline(void) -{ - unsigned int tramp_len; - unsigned int offset; - /* - * Create a trampoline which is places in DRAM and calls back into the - * PBL entry function found in the TCRAM. Register x0 is set to 1 to - * indicate that DRAM setup was already run. - */ - tramp_len = (void *)trampoline_end - (void *)trampoline_start; - memcpy((void *)MX8MQ_ATF_BL33_BASE_ADDR, (void *)trampoline_start, - tramp_len); - - offset = get_runtime_offset(); - memcpy((void *)MX8MQ_ATF_BL33_BASE_ADDR + tramp_len, &offset, - sizeof(offset)); -} - /* * Power-on execution flow of start_nxp_imx8mq_evk() might not be * obvious for a very first read, so here's, hopefully helpful, @@ -105,23 +84,24 @@ static __noreturn noinline void nxp_imx8mq_evk_start(void) const u8 *bl31; size_t bl31_size; - imx8mq_cpu_lowlevel_init(); - if (IS_ENABLED(CONFIG_DEBUG_LL)) setup_uart(); /* - * if register r0 does not contain 1, we are running for the first time - * and need to initialize the DRAM, install the trampoline and run TF-A - * (BL31). - * Otherwise the 1 indicates that the DRAM setup and trampoline are - * already installed and TF-A has been run. In this case we can skip + * If we are in EL3 we are running for the first time and need to + * initialize the DRAM and run TF-A (BL31). The TF-A will then jump + * to DRAM in EL2. */ if (current_el() == 3) { nxp_imx8mq_evk_sram_setup(); - nxp_imx8mq_evk_install_tfa_trampoline(); get_builtin_firmware(imx8mq_bl31_bin, &bl31, &bl31_size); + /* + * On completion the TF-A will jump to MX8MQ_ATF_BL33_BASE_ADDR in + * EL2. Copy ourselves there. + */ + memcpy((void *)MX8MQ_ATF_BL33_BASE_ADDR, _text, __bss_start - _text); imx8mq_atf_load_bl31(bl31, bl31_size); + /* not reached */ } imx8_get_boot_source(&src, &instance); diff --git a/arch/arm/boards/nxp-imx8mq-evk/trampoline.S b/arch/arm/boards/nxp-imx8mq-evk/trampoline.S deleted file mode 100644 index 54a1b76518..0000000000 --- a/arch/arm/boards/nxp-imx8mq-evk/trampoline.S +++ /dev/null @@ -1,10 +0,0 @@ -/* SPDX-License-Identifier: (GPL-2.0) */ -#include <linux/linkage.h> -#include <asm/sections.h> - .section .trampoline,"a" - .globl trampoline_start -trampoline_start: - ldr w19, trampoline_end - br x19 - .globl trampoline_end -trampoline_end: diff --git a/arch/arm/boards/phytec-phycard-imx27/lowlevel.c b/arch/arm/boards/phytec-phycard-imx27/lowlevel.c index 09994e4492..bd46df0962 100644 --- a/arch/arm/boards/phytec-phycard-imx27/lowlevel.c +++ b/arch/arm/boards/phytec-phycard-imx27/lowlevel.c @@ -126,7 +126,7 @@ ENTRY_FUNCTION(start_phytec_phycard_imx27_64mb, r0, r1, r2) { void *fdt; - arm_setup_stack(MX27_IRAM_BASE_ADDR + MX27_IRAM_SIZE - 12); + arm_setup_stack(MX27_IRAM_BASE_ADDR + MX27_IRAM_SIZE); fdt = __dtb_imx27_phytec_phycard_s_rdk_bb_start + get_runtime_offset(); @@ -137,7 +137,7 @@ ENTRY_FUNCTION(start_phytec_phycard_imx27_128mb, r0, r1, r2) { void *fdt; - arm_setup_stack(MX27_IRAM_BASE_ADDR + MX27_IRAM_SIZE - 12); + arm_setup_stack(MX27_IRAM_BASE_ADDR + MX27_IRAM_SIZE); fdt = __dtb_imx27_phytec_phycard_s_rdk_bb_start + get_runtime_offset(); diff --git a/arch/arm/boards/phytec-phycore-imx27/lowlevel.c b/arch/arm/boards/phytec-phycore-imx27/lowlevel.c index b858ff348b..a9e296a0af 100644 --- a/arch/arm/boards/phytec-phycore-imx27/lowlevel.c +++ b/arch/arm/boards/phytec-phycore-imx27/lowlevel.c @@ -106,7 +106,7 @@ ENTRY_FUNCTION(start_phytec_phycore_imx27, r0, r1, r2) { void *fdt; - arm_setup_stack(MX27_IRAM_BASE_ADDR + MX27_IRAM_SIZE - 12); + arm_setup_stack(MX27_IRAM_BASE_ADDR + MX27_IRAM_SIZE); fdt = __dtb_imx27_phytec_phycore_rdk_start + get_runtime_offset(); diff --git a/arch/arm/boards/phytec-phycore-imx31/lowlevel.c b/arch/arm/boards/phytec-phycore-imx31/lowlevel.c index 19296e5dac..b5f333987a 100644 --- a/arch/arm/boards/phytec-phycore-imx31/lowlevel.c +++ b/arch/arm/boards/phytec-phycore-imx31/lowlevel.c @@ -38,7 +38,7 @@ void __bare_init __naked barebox_arm_reset_vector(uint32_t r0, uint32_t r1, uint arm_cpu_lowlevel_init(); - arm_setup_stack(MX31_IRAM_BASE_ADDR + MX31_IRAM_SIZE - 12); + arm_setup_stack(MX31_IRAM_BASE_ADDR + MX31_IRAM_SIZE); writel(1 << 6, MX31_IPU_CTRL_BASE_ADDR); diff --git a/arch/arm/boards/phytec-phycore-imx35/lowlevel.c b/arch/arm/boards/phytec-phycore-imx35/lowlevel.c index 6bfa0acce3..b80dafec16 100644 --- a/arch/arm/boards/phytec-phycore-imx35/lowlevel.c +++ b/arch/arm/boards/phytec-phycore-imx35/lowlevel.c @@ -44,7 +44,7 @@ void __bare_init __naked barebox_arm_reset_vector(uint32_t r0, uint32_t r1, uint arm_cpu_lowlevel_init(); - arm_setup_stack(MX35_IRAM_BASE_ADDR + MX35_IRAM_SIZE - 8); + arm_setup_stack(MX35_IRAM_BASE_ADDR + MX35_IRAM_SIZE); r = get_cr(); r |= CR_Z; /* Flow prediction (Z) */ diff --git a/arch/arm/boards/phytec-som-imx6/lowlevel.c b/arch/arm/boards/phytec-som-imx6/lowlevel.c index 07bb0ed1b5..2de84169c6 100644 --- a/arch/arm/boards/phytec-som-imx6/lowlevel.c +++ b/arch/arm/boards/phytec-som-imx6/lowlevel.c @@ -59,11 +59,11 @@ static void __noreturn start_imx6_phytec_common(uint32_t size, || cpu_type == IMX6_CPUTYPE_IMX6ULL) { imx6ul_cpu_lowlevel_init(); /* OCRAM Free Area is 0x00907000 to 0x00918000 (68KB) */ - arm_setup_stack(0x00910000 - 8); + arm_setup_stack(0x00910000); } else { imx6_cpu_lowlevel_init(); /* OCRAM Free Area is 0x00907000 to 0x00938000 (196KB) */ - arm_setup_stack(0x00920000 - 8); + arm_setup_stack(0x00920000); } if (do_early_uart_config && IS_ENABLED(CONFIG_DEBUG_LL)) diff --git a/arch/arm/boards/pm9261/lowlevel_init.c b/arch/arm/boards/pm9261/lowlevel_init.c index 7127d39943..b18cd067b7 100644 --- a/arch/arm/boards/pm9261/lowlevel_init.c +++ b/arch/arm/boards/pm9261/lowlevel_init.c @@ -115,7 +115,7 @@ void __naked __bare_init barebox_arm_reset_vector(uint32_t r0, uint32_t r1, uint { arm_cpu_lowlevel_init(); - arm_setup_stack(AT91SAM9261_SRAM_BASE + AT91SAM9261_SRAM_SIZE - 16); + arm_setup_stack(AT91SAM9261_SRAM_BASE + AT91SAM9261_SRAM_SIZE); pm9261_init(); } diff --git a/arch/arm/boards/pm9263/lowlevel_init.c b/arch/arm/boards/pm9263/lowlevel_init.c index daeb183831..8f44adee99 100644 --- a/arch/arm/boards/pm9263/lowlevel_init.c +++ b/arch/arm/boards/pm9263/lowlevel_init.c @@ -136,7 +136,7 @@ void __naked __bare_init barebox_arm_reset_vector(uint32_t r0, uint32_t r1, uint { arm_cpu_lowlevel_init(); - arm_setup_stack(AT91SAM9263_SRAM0_BASE + AT91SAM9263_SRAM0_SIZE - 16); + arm_setup_stack(AT91SAM9263_SRAM0_BASE + AT91SAM9263_SRAM0_SIZE); pm9263_board_init(); } diff --git a/arch/arm/boards/pm9g45/lowlevel.c b/arch/arm/boards/pm9g45/lowlevel.c index 12cf950685..fc0bfe405b 100644 --- a/arch/arm/boards/pm9g45/lowlevel.c +++ b/arch/arm/boards/pm9g45/lowlevel.c @@ -17,7 +17,7 @@ void __naked __bare_init barebox_arm_reset_vector(uint32_t r0, uint32_t r1, uint { arm_cpu_lowlevel_init(); - arm_setup_stack(AT91SAM9G45_SRAM_BASE + AT91SAM9G45_SRAM_SIZE - 16); + arm_setup_stack(AT91SAM9G45_SRAM_BASE + AT91SAM9G45_SRAM_SIZE); barebox_arm_entry(AT91_CHIPSELECT_6, at91sam9g45_get_ddram_size(1), NULL); diff --git a/arch/arm/boards/qil-a926x/lowlevel.c b/arch/arm/boards/qil-a926x/lowlevel.c index 25352672d7..7f52f824df 100644 --- a/arch/arm/boards/qil-a926x/lowlevel.c +++ b/arch/arm/boards/qil-a926x/lowlevel.c @@ -18,7 +18,7 @@ void __naked __bare_init barebox_arm_reset_vector(uint32_t r0, uint32_t r1, uint { arm_cpu_lowlevel_init(); - arm_setup_stack(AT91SAM9260_SRAM_BASE + AT91SAM9260_SRAM_SIZE - 16); + arm_setup_stack(AT91SAM9260_SRAM_BASE + AT91SAM9260_SRAM_SIZE); barebox_arm_entry(AT91_CHIPSELECT_1, at91_get_sdram_size(IOMEM(AT91SAM9260_BASE_SDRAMC)), diff --git a/arch/arm/boards/raspberry-pi/lowlevel.c b/arch/arm/boards/raspberry-pi/lowlevel.c index 4b64f5d1d7..70f1936522 100644 --- a/arch/arm/boards/raspberry-pi/lowlevel.c +++ b/arch/arm/boards/raspberry-pi/lowlevel.c @@ -40,7 +40,7 @@ static inline void start_raspberry_pi(unsigned long memsize, void *fdt, /* Copied from barebox_arm_entry(). We need stack here early * for normal function calls to work. */ - arm_setup_stack(arm_mem_stack_top(membase, membase + memsize) - 16); + arm_setup_stack(arm_mem_stack_top(membase, membase + memsize)); fdt += get_runtime_offset(); diff --git a/arch/arm/boards/reflex-achilles/lowlevel.c b/arch/arm/boards/reflex-achilles/lowlevel.c index b3da58f71f..f910b67d5f 100644 --- a/arch/arm/boards/reflex-achilles/lowlevel.c +++ b/arch/arm/boards/reflex-achilles/lowlevel.c @@ -77,7 +77,7 @@ static noinline void achilles_start(void) ENTRY_FUNCTION(start_socfpga_achilles_xload, r0, r1, r2) { arm_cpu_lowlevel_init(); - arm_setup_stack(ARRIA10_OCRAM_ADDR + SZ_256K - 32); + arm_setup_stack(ARRIA10_OCRAM_ADDR + SZ_256K); achilles_start(); } @@ -96,7 +96,7 @@ ENTRY_FUNCTION(start_socfpga_achilles_bringup, r0, r1, r2) arm_cpu_lowlevel_init(); - arm_setup_stack(ARRIA10_OCRAM_ADDR + SZ_256K - 16); + arm_setup_stack(ARRIA10_OCRAM_ADDR + SZ_256K); arm_early_mmu_cache_invalidate(); diff --git a/arch/arm/boards/sama5d3_xplained/lowlevel.c b/arch/arm/boards/sama5d3_xplained/lowlevel.c index 8492ae95fb..8653c48c69 100644 --- a/arch/arm/boards/sama5d3_xplained/lowlevel.c +++ b/arch/arm/boards/sama5d3_xplained/lowlevel.c @@ -17,7 +17,7 @@ void __naked __bare_init barebox_arm_reset_vector(uint32_t r0, uint32_t r1, uint { arm_cpu_lowlevel_init(); - arm_setup_stack(SAMA5D3_SRAM_BASE + SAMA5D3_SRAM_SIZE - 16); + arm_setup_stack(SAMA5D3_SRAM_BASE + SAMA5D3_SRAM_SIZE); barebox_arm_entry(SAMA5_DDRCS, at91sama5d3_get_ddram_size(), NULL); } diff --git a/arch/arm/boards/sama5d3xek/lowlevel.c b/arch/arm/boards/sama5d3xek/lowlevel.c index 8492ae95fb..8653c48c69 100644 --- a/arch/arm/boards/sama5d3xek/lowlevel.c +++ b/arch/arm/boards/sama5d3xek/lowlevel.c @@ -17,7 +17,7 @@ void __naked __bare_init barebox_arm_reset_vector(uint32_t r0, uint32_t r1, uint { arm_cpu_lowlevel_init(); - arm_setup_stack(SAMA5D3_SRAM_BASE + SAMA5D3_SRAM_SIZE - 16); + arm_setup_stack(SAMA5D3_SRAM_BASE + SAMA5D3_SRAM_SIZE); barebox_arm_entry(SAMA5_DDRCS, at91sama5d3_get_ddram_size(), NULL); } diff --git a/arch/arm/boards/sama5d4_xplained/lowlevel.c b/arch/arm/boards/sama5d4_xplained/lowlevel.c index 9021ef57c5..9a6a767e5f 100644 --- a/arch/arm/boards/sama5d4_xplained/lowlevel.c +++ b/arch/arm/boards/sama5d4_xplained/lowlevel.c @@ -17,7 +17,7 @@ void __naked __bare_init barebox_arm_reset_vector(uint32_t r0, uint32_t r1, uint { arm_cpu_lowlevel_init(); - arm_setup_stack(SAMA5D4_SRAM_BASE + SAMA5D4_SRAM_SIZE - 16); + arm_setup_stack(SAMA5D4_SRAM_BASE + SAMA5D4_SRAM_SIZE); barebox_arm_entry(SAMA5_DDRCS, at91sama5d4_get_ddram_size(), NULL); } diff --git a/arch/arm/boards/sama5d4ek/lowlevel.c b/arch/arm/boards/sama5d4ek/lowlevel.c index 9021ef57c5..9a6a767e5f 100644 --- a/arch/arm/boards/sama5d4ek/lowlevel.c +++ b/arch/arm/boards/sama5d4ek/lowlevel.c @@ -17,7 +17,7 @@ void __naked __bare_init barebox_arm_reset_vector(uint32_t r0, uint32_t r1, uint { arm_cpu_lowlevel_init(); - arm_setup_stack(SAMA5D4_SRAM_BASE + SAMA5D4_SRAM_SIZE - 16); + arm_setup_stack(SAMA5D4_SRAM_BASE + SAMA5D4_SRAM_SIZE); barebox_arm_entry(SAMA5_DDRCS, at91sama5d4_get_ddram_size(), NULL); } diff --git a/arch/arm/boards/technexion-pico-hobbit/lowlevel.c b/arch/arm/boards/technexion-pico-hobbit/lowlevel.c index 77f48043da..f59c424dec 100644 --- a/arch/arm/boards/technexion-pico-hobbit/lowlevel.c +++ b/arch/arm/boards/technexion-pico-hobbit/lowlevel.c @@ -39,7 +39,7 @@ static void __noreturn start_imx6_pico_hobbit_common(uint32_t size, imx6ul_cpu_lowlevel_init(); - arm_setup_stack(0x00910000 - 8); + arm_setup_stack(0x00910000); arm_early_mmu_cache_invalidate(); diff --git a/arch/arm/boards/technexion-wandboard/lowlevel.c b/arch/arm/boards/technexion-wandboard/lowlevel.c index 9aae429d45..af04eadc9f 100644 --- a/arch/arm/boards/technexion-wandboard/lowlevel.c +++ b/arch/arm/boards/technexion-wandboard/lowlevel.c @@ -359,7 +359,7 @@ ENTRY_FUNCTION(start_imx6_wandboard, r0, r1, r2) { imx6_cpu_lowlevel_init(); - arm_setup_stack(0x0091ffb0); + arm_setup_stack(0x00920000); relocate_to_current_adr(); setup_c(); diff --git a/arch/arm/boards/telit-evk-pro3/lowlevel.c b/arch/arm/boards/telit-evk-pro3/lowlevel.c index 25352672d7..7f52f824df 100644 --- a/arch/arm/boards/telit-evk-pro3/lowlevel.c +++ b/arch/arm/boards/telit-evk-pro3/lowlevel.c @@ -18,7 +18,7 @@ void __naked __bare_init barebox_arm_reset_vector(uint32_t r0, uint32_t r1, uint { arm_cpu_lowlevel_init(); - arm_setup_stack(AT91SAM9260_SRAM_BASE + AT91SAM9260_SRAM_SIZE - 16); + arm_setup_stack(AT91SAM9260_SRAM_BASE + AT91SAM9260_SRAM_SIZE); barebox_arm_entry(AT91_CHIPSELECT_1, at91_get_sdram_size(IOMEM(AT91SAM9260_BASE_SDRAMC)), diff --git a/arch/arm/boards/tny-a926x/tny_a9260_lowlevel.c b/arch/arm/boards/tny-a926x/tny_a9260_lowlevel.c index 25352672d7..7f52f824df 100644 --- a/arch/arm/boards/tny-a926x/tny_a9260_lowlevel.c +++ b/arch/arm/boards/tny-a926x/tny_a9260_lowlevel.c @@ -18,7 +18,7 @@ void __naked __bare_init barebox_arm_reset_vector(uint32_t r0, uint32_t r1, uint { arm_cpu_lowlevel_init(); - arm_setup_stack(AT91SAM9260_SRAM_BASE + AT91SAM9260_SRAM_SIZE - 16); + arm_setup_stack(AT91SAM9260_SRAM_BASE + AT91SAM9260_SRAM_SIZE); barebox_arm_entry(AT91_CHIPSELECT_1, at91_get_sdram_size(IOMEM(AT91SAM9260_BASE_SDRAMC)), diff --git a/arch/arm/boards/tny-a926x/tny_a9263_lowlevel.c b/arch/arm/boards/tny-a926x/tny_a9263_lowlevel.c index 868df9d6c8..565ba438d2 100644 --- a/arch/arm/boards/tny-a926x/tny_a9263_lowlevel.c +++ b/arch/arm/boards/tny-a926x/tny_a9263_lowlevel.c @@ -122,7 +122,7 @@ void __naked __bare_init barebox_arm_reset_vector(uint32_t r0, uint32_t r1, uint { arm_cpu_lowlevel_init(); - arm_setup_stack(AT91SAM9263_SRAM0_BASE + AT91SAM9263_SRAM0_SIZE - 16); + arm_setup_stack(AT91SAM9263_SRAM0_BASE + AT91SAM9263_SRAM0_SIZE); tny_a9263_init(); } diff --git a/arch/arm/boards/tqma53/lowlevel.c b/arch/arm/boards/tqma53/lowlevel.c index 0d0b16846c..97a7ac556e 100644 --- a/arch/arm/boards/tqma53/lowlevel.c +++ b/arch/arm/boards/tqma53/lowlevel.c @@ -45,7 +45,7 @@ ENTRY_FUNCTION(start_imx53_mba53_512mib, r0, r1, r2) imx5_cpu_lowlevel_init(); - arm_setup_stack(MX53_IRAM_BASE_ADDR + MX53_IRAM_SIZE - 8); + arm_setup_stack(MX53_IRAM_BASE_ADDR + MX53_IRAM_SIZE); IMD_USED(tqma53_memsize_512M); @@ -64,7 +64,7 @@ ENTRY_FUNCTION(start_imx53_mba53_1gib, r0, r1, r2) imx5_cpu_lowlevel_init(); - arm_setup_stack(MX53_IRAM_BASE_ADDR + MX53_IRAM_SIZE - 8); + arm_setup_stack(MX53_IRAM_BASE_ADDR + MX53_IRAM_SIZE); IMD_USED(tqma53_memsize_1G); diff --git a/arch/arm/boards/tqma6x/lowlevel.c b/arch/arm/boards/tqma6x/lowlevel.c index a90cd4007f..afbc1691eb 100644 --- a/arch/arm/boards/tqma6x/lowlevel.c +++ b/arch/arm/boards/tqma6x/lowlevel.c @@ -32,7 +32,7 @@ ENTRY_FUNCTION(start_imx6q_mba6x, r0, r1, r2) imx6_cpu_lowlevel_init(); - arm_setup_stack(0x00920000 - 8); + arm_setup_stack(0x00920000); if (IS_ENABLED(CONFIG_DEBUG_LL)) { writel(0x2, 0x020e0338); @@ -53,7 +53,7 @@ ENTRY_FUNCTION(start_imx6dl_mba6x, r0, r1, r2) imx6_cpu_lowlevel_init(); - arm_setup_stack(0x00920000 - 8); + arm_setup_stack(0x00920000); if (IS_ENABLED(CONFIG_DEBUG_LL)) { writel(0x2, 0x020e035c); diff --git a/arch/arm/boards/usb-a926x/usb_a9260_lowlevel.c b/arch/arm/boards/usb-a926x/usb_a9260_lowlevel.c index 25352672d7..7f52f824df 100644 --- a/arch/arm/boards/usb-a926x/usb_a9260_lowlevel.c +++ b/arch/arm/boards/usb-a926x/usb_a9260_lowlevel.c @@ -18,7 +18,7 @@ void __naked __bare_init barebox_arm_reset_vector(uint32_t r0, uint32_t r1, uint { arm_cpu_lowlevel_init(); - arm_setup_stack(AT91SAM9260_SRAM_BASE + AT91SAM9260_SRAM_SIZE - 16); + arm_setup_stack(AT91SAM9260_SRAM_BASE + AT91SAM9260_SRAM_SIZE); barebox_arm_entry(AT91_CHIPSELECT_1, at91_get_sdram_size(IOMEM(AT91SAM9260_BASE_SDRAMC)), diff --git a/arch/arm/boards/usb-a926x/usb_a9263_lowlevel.c b/arch/arm/boards/usb-a926x/usb_a9263_lowlevel.c index b362fcf7d4..2ad88d7f22 100644 --- a/arch/arm/boards/usb-a926x/usb_a9263_lowlevel.c +++ b/arch/arm/boards/usb-a926x/usb_a9263_lowlevel.c @@ -126,7 +126,7 @@ void __naked __bare_init barebox_arm_reset_vector(uint32_t r0, uint32_t r1, uint { arm_cpu_lowlevel_init(); - arm_setup_stack(AT91SAM9263_SRAM0_BASE + AT91SAM9263_SRAM0_SIZE - 16); + arm_setup_stack(AT91SAM9263_SRAM0_BASE + AT91SAM9263_SRAM0_SIZE); usb_a9263_init(); } diff --git a/arch/arm/boards/variscite-mx6/lowlevel.c b/arch/arm/boards/variscite-mx6/lowlevel.c index 337bc58c8d..d75d770a7e 100644 --- a/arch/arm/boards/variscite-mx6/lowlevel.c +++ b/arch/arm/boards/variscite-mx6/lowlevel.c @@ -45,7 +45,7 @@ ENTRY_FUNCTION(start_variscite_custom, r0, r1, r2) imx6_cpu_lowlevel_init(); - arm_setup_stack(0x00920000 - 8); + arm_setup_stack(0x00920000); if (IS_ENABLED(CONFIG_DEBUG_LL)) setup_uart(); diff --git a/arch/arm/boards/zii-imx6q-rdu2/lowlevel.c b/arch/arm/boards/zii-imx6q-rdu2/lowlevel.c index 9672a69bfd..3f5d90b61d 100644 --- a/arch/arm/boards/zii-imx6q-rdu2/lowlevel.c +++ b/arch/arm/boards/zii-imx6q-rdu2/lowlevel.c @@ -271,7 +271,7 @@ static noinline void rdu2_sram_setup(void) enum bootsource bootsrc; int instance; - arm_setup_stack(0x00920000 - 8); + arm_setup_stack(0x00920000); relocate_to_current_adr(); setup_c(); diff --git a/arch/arm/boards/zii-vf610-dev/board.c b/arch/arm/boards/zii-vf610-dev/board.c index 0697a1660e..1d10f12f63 100644 --- a/arch/arm/boards/zii-vf610-dev/board.c +++ b/arch/arm/boards/zii-vf610-dev/board.c @@ -128,7 +128,7 @@ static int zii_vf610_dev_set_hostname(void) { "zii,vf610cfu1", "cfu1" }, { "zii,vf610dev-b", "dev-rev-b" }, { "zii,vf610dev-c", "dev-rev-c" }, - { "zii,vf610scu4-aib-c", "scu4-aib-rev-c" }, + { "zii,vf610scu4-aib", "scu4-aib" }, }; if (!of_machine_is_compatible("zii,vf610dev")) diff --git a/arch/arm/boards/zii-vf610-dev/defaultenv-zii-vf610-dev/nv/autoboot_abort_key b/arch/arm/boards/zii-vf610-dev/defaultenv-zii-vf610-dev/nv/autoboot_abort_key new file mode 100644 index 0000000000..55920c9a58 --- /dev/null +++ b/arch/arm/boards/zii-vf610-dev/defaultenv-zii-vf610-dev/nv/autoboot_abort_key @@ -0,0 +1 @@ +ctrl-c
\ No newline at end of file diff --git a/arch/arm/cpu/Kconfig b/arch/arm/cpu/Kconfig index f8abbccfca..6b4fed5269 100644 --- a/arch/arm/cpu/Kconfig +++ b/arch/arm/cpu/Kconfig @@ -87,6 +87,7 @@ config CPU_V8 select CPU_SUPPORTS_64BIT_KERNEL select ARM_EXCEPTIONS select GENERIC_FIND_NEXT_BIT + select ARCH_HAS_STACK_DUMP config CPU_XSC3 bool diff --git a/arch/arm/cpu/common.c b/arch/arm/cpu/common.c index 4d957da1dc..c81b2b3791 100644 --- a/arch/arm/cpu/common.c +++ b/arch/arm/cpu/common.c @@ -84,6 +84,8 @@ void relocate_to_current_adr(void) unsigned long *fixup = (unsigned long *)(rel->r_offset + offset); *fixup = rel->r_addend + offset; + rel->r_addend += offset; + rel->r_offset += offset; } else { putc_ll('>'); puthex_ll(rel->r_info); diff --git a/arch/arm/cpu/entry.c b/arch/arm/cpu/entry.c index b48c1ca11d..30df95f078 100644 --- a/arch/arm/cpu/entry.c +++ b/arch/arm/cpu/entry.c @@ -27,7 +27,7 @@ void NAKED __noreturn barebox_arm_entry(unsigned long membase, unsigned long memsize, void *boarddata) { - arm_setup_stack(arm_mem_stack_top(membase, membase + memsize) - 16); + arm_setup_stack(arm_mem_stack_top(membase, membase + memsize)); arm_early_mmu_cache_invalidate(); if (IS_ENABLED(CONFIG_PBL_MULTI_IMAGES)) diff --git a/arch/arm/cpu/uncompress.c b/arch/arm/cpu/uncompress.c index 9cc3b358b0..4f16af22f8 100644 --- a/arch/arm/cpu/uncompress.c +++ b/arch/arm/cpu/uncompress.c @@ -42,18 +42,14 @@ unsigned long free_mem_end_ptr; extern unsigned char input_data[]; extern unsigned char input_data_end[]; -extern unsigned char sha_sum[]; -extern unsigned char sha_sum_end[]; - void __noreturn barebox_multi_pbl_start(unsigned long membase, unsigned long memsize, void *boarddata) { - uint32_t pg_len, uncompressed_len, pbl_hash_len; + uint32_t pg_len, uncompressed_len; void __noreturn (*barebox)(unsigned long, unsigned long, void *); unsigned long endmem = membase + memsize; unsigned long barebox_base; void *pg_start, *pg_end; - void *pbl_hash_start, *pbl_hash_end; unsigned long pc = get_pc(); pg_start = input_data + global_variable_offset(); @@ -96,17 +92,6 @@ void __noreturn barebox_multi_pbl_start(unsigned long membase, pr_debug("uncompressing barebox binary at 0x%p (size 0x%08x) to 0x%08lx (uncompressed size: 0x%08x)\n", pg_start, pg_len, barebox_base, uncompressed_len); - if (IS_ENABLED(CONFIG_PBL_VERIFY_PIGGY)) { - pbl_hash_start = sha_sum; - pbl_hash_end = sha_sum_end; - pbl_hash_len = pbl_hash_end - pbl_hash_start; - if (pbl_barebox_verify(pg_start, pg_len, pbl_hash_start, - pbl_hash_len) != 0) { - putc_ll('!'); - panic("hash mismatch, refusing to decompress"); - } - } - pbl_barebox_uncompress((void*)barebox_base, pg_start, pg_len); sync_caches_for_execution(); diff --git a/arch/arm/dts/imx8mq-zii-ultra.dtsi b/arch/arm/dts/imx8mq-zii-ultra.dtsi index 53679b0d3c..6e41e820b8 100644 --- a/arch/arm/dts/imx8mq-zii-ultra.dtsi +++ b/arch/arm/dts/imx8mq-zii-ultra.dtsi @@ -23,6 +23,15 @@ }; }; + aliases { + /* + * NVMEM device corresponding to EEPROM attached to + * the switch shared DT node with it, so we use that + * fact to create a desirable naming + */ + switch-eeprom = &switch; + }; + mdio0: bitbang-mdio { compatible = "virtual,mdio-gpio"; pinctrl-names = "default"; diff --git a/arch/arm/dts/vf610-zii-cfu1.dts b/arch/arm/dts/vf610-zii-cfu1.dts index 1de9ee9ad2..70cd9d1ba9 100644 --- a/arch/arm/dts/vf610-zii-cfu1.dts +++ b/arch/arm/dts/vf610-zii-cfu1.dts @@ -11,10 +11,25 @@ / { aliases { /* - * NVMEM device corresponding to EEPROM attached to - * the switch shared DT node with it, so we use that - * fact to create a desirable naming - */ + * NVMEM device corresponding to EEPROM attached to + * the switch shared DT node with it, so we use that + * fact to create a desirable naming + */ switch-eeprom = &switch0; + fiber-eeprom0 = &fiber_eeprom0; + }; + + gpio-leds { + led-status { + linux,default-trigger = "heartbeat"; + }; + }; +}; + +&i2c0 { + fiber_eeprom0: eeprom@50 { + compatible = "atmel,24c04"; + reg = <0x50>; + label = "fiber0"; }; }; diff --git a/arch/arm/dts/vf610-zii-dev-rev-b.dts b/arch/arm/dts/vf610-zii-dev-rev-b.dts index c90af91a9f..abc5237080 100644 --- a/arch/arm/dts/vf610-zii-dev-rev-b.dts +++ b/arch/arm/dts/vf610-zii-dev-rev-b.dts @@ -10,7 +10,7 @@ / { spi0 { - m25p128@0 { + flash@0 { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/dts/vf610-zii-dev-rev-c.dts b/arch/arm/dts/vf610-zii-dev-rev-c.dts index ecec0b1830..62c70c8905 100644 --- a/arch/arm/dts/vf610-zii-dev-rev-c.dts +++ b/arch/arm/dts/vf610-zii-dev-rev-c.dts @@ -21,7 +21,7 @@ }; &dspi0 { - m25p128@0 { + flash@0 { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/dts/vf610-zii-scu4-aib.dts b/arch/arm/dts/vf610-zii-scu4-aib.dts index abe9e14fd7..43a13e243d 100644 --- a/arch/arm/dts/vf610-zii-scu4-aib.dts +++ b/arch/arm/dts/vf610-zii-scu4-aib.dts @@ -17,5 +17,95 @@ switch1-eeprom = &switch1; switch2-eeprom = &switch2; switch3-eeprom = &switch3; + fiber-eeprom0 = &fiber_eeprom0; + fiber-eeprom1 = &fiber_eeprom1; + fiber-eeprom2 = &fiber_eeprom2; + fiber-eeprom3 = &fiber_eeprom3; + fiber-eeprom4 = &fiber_eeprom4; + fiber-eeprom5 = &fiber_eeprom5; + fiber-eeprom6 = &fiber_eeprom6; + fiber-eeprom7 = &fiber_eeprom7; + fiber-eeprom8 = &fiber_eeprom8; + fiber-eeprom9 = &fiber_eeprom9; + }; +}; + +&sff0_i2c { + fiber_eeprom0: eeprom@50 { + compatible = "atmel,24c04"; + reg = <0x50>; + label = "fiber0"; + }; +}; + +&sff1_i2c { + fiber_eeprom1: eeprom@50 { + compatible = "atmel,24c04"; + reg = <0x50>; + label = "fiber1"; + }; +}; + +&sff2_i2c { + fiber_eeprom2: eeprom@50 { + compatible = "atmel,24c04"; + reg = <0x50>; + label = "fiber2"; + }; +}; + +&sff3_i2c { + fiber_eeprom3: eeprom@50 { + compatible = "atmel,24c04"; + reg = <0x50>; + label = "fiber3"; + }; +}; + +&sff4_i2c { + fiber_eeprom4: eeprom@50 { + compatible = "atmel,24c04"; + reg = <0x50>; + label = "fiber4"; + }; +}; + +&sff5_i2c { + fiber_eeprom5: eeprom@50 { + compatible = "atmel,24c04"; + reg = <0x50>; + label = "fiber5"; + }; +}; + +&sff6_i2c { + fiber_eeprom6: eeprom@50 { + compatible = "atmel,24c04"; + reg = <0x50>; + label = "fiber6"; + }; +}; + +&sff7_i2c { + fiber_eeprom7: eeprom@50 { + compatible = "atmel,24c04"; + reg = <0x50>; + label = "fiber7"; + }; +}; + +&sff8_i2c { + fiber_eeprom8: eeprom@50 { + compatible = "atmel,24c04"; + reg = <0x50>; + label = "fiber8"; + }; +}; + +&sff9_i2c { + fiber_eeprom9: eeprom@50 { + compatible = "atmel,24c04"; + reg = <0x50>; + label = "fiber9"; }; }; diff --git a/arch/arm/include/asm/barebox.h b/arch/arm/include/asm/barebox.h deleted file mode 100644 index 4e89466593..0000000000 --- a/arch/arm/include/asm/barebox.h +++ /dev/null @@ -1,16 +0,0 @@ -#ifndef _BAREBOX_H_ -#define _BAREBOX_H_ 1 - -#ifdef CONFIG_ARM_UNWIND -#define ARCH_HAS_STACK_DUMP -#endif - -#ifdef CONFIG_CPU_V8 -#define ARCH_HAS_STACK_DUMP -#endif - -#ifdef CONFIG_ARM_EXCEPTIONS -#define ARCH_HAS_DATA_ABORT_MASK -#endif - -#endif /* _BAREBOX_H_ */ diff --git a/arch/arm/lib64/runtime-offset.S b/arch/arm/lib64/runtime-offset.S index 6624fdfa15..5e5ab9a8d1 100644 --- a/arch/arm/lib64/runtime-offset.S +++ b/arch/arm/lib64/runtime-offset.S @@ -1,31 +1,25 @@ #include <linux/linkage.h> #include <asm/assembler.h> -/* - * The .section directive below intentionally omits "a", since that - * appears to be the simplest way to force assembler to not generate - * R_AARCH64_RELATIVE relocation for - * - * linkadr: - * .quad get_runtime_offset - * - * statement below. While having that relocating was relatively - * harmless with GCC8, builging the code with GCC5 resulted in - * "linkaddr" being initialized to 0 causing complete boot breakdown - */ -.section ".text_bare_init","x" +.section ".text_bare_init","ax" /* * Get the offset between the link address and the address * we are currently running at. */ ENTRY(get_runtime_offset) -1: adr x0, 1b +1: adr x0, _text ldr x1, linkadr subs x0, x0, x1 ret .align 3 linkadr: -.quad get_runtime_offset +/* + * With older gcc versions (gcc5) function pointers will not be filled + * into the binary during compile time and instead rely on relocation + * during runtime. In the binary we'll always have 0x0 here. We deliberately + * use _text here since that is 0x0 and is correct without relocation. + */ +.quad _text ENDPROC(get_runtime_offset) diff --git a/arch/arm/mach-imx/imx-bbu-internal.c b/arch/arm/mach-imx/imx-bbu-internal.c index a563b3bc29..946a3e9a77 100644 --- a/arch/arm/mach-imx/imx-bbu-internal.c +++ b/arch/arm/mach-imx/imx-bbu-internal.c @@ -87,6 +87,7 @@ static int imx_bbu_write_device(struct imx_internal_bbu_handler *imx_handler, const void *buf, int image_len) { int fd, ret, offset = 0; + struct stat st; fd = open(devicefile, O_RDWR | O_CREAT); if (fd < 0) @@ -101,6 +102,15 @@ static int imx_bbu_write_device(struct imx_internal_bbu_handler *imx_handler, if (imx_handler->handler.flags & IMX_BBU_FLAG_KEEP_HEAD) offset += imx_handler->flash_header_offset; + ret = fstat(fd, &st); + if (ret) + goto err_close; + + if (image_len > st.st_size) { + ret = -ENOSPC; + goto err_close; + } + ret = imx_bbu_protect(fd, imx_handler, devicefile, offset, image_len, 0); if (ret) diff --git a/arch/arm/mach-imx/imx8-ddrc.c b/arch/arm/mach-imx/imx8-ddrc.c index 736865eb6f..8bb2672102 100644 --- a/arch/arm/mach-imx/imx8-ddrc.c +++ b/arch/arm/mach-imx/imx8-ddrc.c @@ -69,15 +69,8 @@ static void ddrc_phy_fetch_streaming_message(void __iomem *phy) const u16 index = ddrc_phy_get_message(phy, PMC_MESSAGE_STREAM); u16 i; - putc_ll('|'); - puthex_ll(index); - - for (i = 0; i < index; i++) { - const u32 arg = ddrc_phy_get_message(phy, PMC_MESSAGE_STREAM); - - putc_ll('|'); - puthex_ll(arg); - } + for (i = 0; i < index; i++) + ddrc_phy_get_message(phy, PMC_MESSAGE_STREAM); } void ddrc_phy_wait_training_complete(void __iomem *phy) @@ -85,23 +78,14 @@ void ddrc_phy_wait_training_complete(void __iomem *phy) for (;;) { const u32 m = ddrc_phy_get_message(phy, PMC_MESSAGE_ID); - puthex_ll(m); - switch (m) { case PMC_TRAIN_STREAM_START: ddrc_phy_fetch_streaming_message(phy); break; case PMC_TRAIN_SUCCESS: - putc_ll('P'); - putc_ll('\r'); - putc_ll('\n'); return; case PMC_TRAIN_FAIL: - putc_ll('F'); hang(); } - - putc_ll('\r'); - putc_ll('\n'); } } diff --git a/arch/arm/mach-omap/am33xx_bbu_nand.c b/arch/arm/mach-omap/am33xx_bbu_nand.c index 4c1a28d37e..8c487c8ebb 100644 --- a/arch/arm/mach-omap/am33xx_bbu_nand.c +++ b/arch/arm/mach-omap/am33xx_bbu_nand.c @@ -22,6 +22,8 @@ #include <fcntl.h> #include <libfile.h> #include <filetype.h> +#include <linux/mtd/mtd.h> +#include <mtd/mtd-peb.h> #include <mach/bbu.h> struct nand_bbu_handler { @@ -134,3 +136,147 @@ int am33xx_bbu_nand_slots_register_handler(const char *name, char **devicefile, return ret; } + +#define XLOAD_BLOCKS 4 + +static int nand_update_handler_complete(struct bbu_handler *handler, + struct bbu_data *data) +{ + const void *image = data->image; + size_t size = data->len; + enum filetype filetype; + struct cdev *cdev; + struct mtd_info *mtd; + int ret, i; + int npebs; + + filetype = file_detect_type(image, size); + + cdev = cdev_by_name(handler->devicefile); + if (!cdev) { + pr_err("%s: No NAND device found\n", __func__); + return -ENODEV; + } + + mtd = cdev->mtd; + if (!mtd) { + pr_err("%s: %s is not a mtd device\n", __func__, + handler->devicefile); + return -EINVAL; + } + + npebs = mtd_div_by_eb(mtd->size, mtd); + + /* + * Sanity check: We need at minimum 6 eraseblocks: 4 for the four xload + * binaries and 2 for the barebox images. + */ + if (npebs < XLOAD_BLOCKS + 2) + return -EINVAL; + + if (filetype == filetype_arm_barebox) { + int npebs_bb = (npebs - XLOAD_BLOCKS) / 2; + + pr_info("Barebox image detected, updating 2nd stage\n"); + + /* last chance before erasing the flash */ + ret = bbu_confirm(data); + if (ret) + goto out; + + ret = mtd_peb_write_file(mtd, XLOAD_BLOCKS, npebs_bb, data->image, + data->len); + if (ret) + goto out; + + ret = mtd_peb_write_file(mtd, XLOAD_BLOCKS + npebs_bb, npebs_bb, + data->image, data->len); + if (ret) + goto out; + + } else if (filetype == filetype_ch_image) { + int written = 0; + void *buf; + + pr_info("xload image detected, updating 1st stage\n"); + + if (data->len > mtd->erasesize) { + pr_err("Image is bigger than eraseblock, this is not supported\n"); + ret = -EINVAL; + goto out; + } + + /* last chance before erasing the flash */ + ret = bbu_confirm(data); + if (ret) + goto out; + + buf = xzalloc(mtd->erasesize); + memcpy(buf, data->image, data->len); + + for (i = 0; i < 4; i++) { + if (mtd_peb_is_bad(mtd, i)) { + pr_info("PEB%d is bad, skipping\n", i); + continue; + } + + ret = mtd_peb_erase(mtd, i); + if (ret) + continue; + + ret = mtd_peb_write(mtd, buf, i, 0, mtd->erasesize); + if (ret) { + pr_err("Failed to write MLO to PEB%d: %s\n", i, + strerror(-ret)); + continue; + } + written++; + } + + free(buf); + + if (written) + ret = 0; + else + ret = -EIO; + } else { + pr_err("%s of type %s is not a valid update file image\n", + data->imagefile, file_type_to_string(filetype)); + return -EINVAL; + } +out: + return ret; +} + +/** + * am33xx_bbu_nand_register_handler - register a NAND update handler + * @device: The nand cdev name (usually "nand0.barebox") + * + * This registers an update handler suitable for updating barebox to NAND. This + * update handler takes a single NAND partition for both the xload images and the + * barebox images. The first four blocks are used for the 4 xload copies, the + * remaining space is divided into two equally sized parts for two barebox images. + * The update handler automatically detects based on the filetype if the xload + * or the 2nd stage barebox shall be updated. + * + * FIXME: Currently for actually loading a barebox image from an xload image + * flashed with this layout a suitable layout has to be registered by the xload + * image using omap_set_barebox_part(). In the next step this should be the + * default. + */ +int am33xx_bbu_nand_register_handler(const char *device) +{ + struct bbu_handler *handler; + int ret; + + handler = xzalloc(sizeof(*handler)); + handler->devicefile = device; + handler->handler = nand_update_handler_complete; + handler->name = "nand"; + + ret = bbu_register_handler(handler); + if (ret) + free(handler); + + return ret; +} diff --git a/arch/arm/mach-omap/am35xx_emif4.c b/arch/arm/mach-omap/am35xx_emif4.c index 38fc0f02d2..678a338fd6 100644 --- a/arch/arm/mach-omap/am35xx_emif4.c +++ b/arch/arm/mach-omap/am35xx_emif4.c @@ -37,7 +37,7 @@ void am35xx_emif4_init(void) writel(regval, &emif4_base->sdram_iodft_tlgc); /* Wait till that bit clears*/ - while ((readl(&emif4_base->sdram_iodft_tlgc) & (1 << 10)) == 0x1); + while (readl(&emif4_base->sdram_iodft_tlgc) & (1 << 10)); /* Re-verify the DDR PHY status*/ while ((readl(&emif4_base->sdram_sts) & (1 << 2)) == 0x0); diff --git a/arch/arm/mach-omap/include/mach/bbu.h b/arch/arm/mach-omap/include/mach/bbu.h index c8b0a55acb..94d3f96bb4 100644 --- a/arch/arm/mach-omap/include/mach/bbu.h +++ b/arch/arm/mach-omap/include/mach/bbu.h @@ -23,6 +23,7 @@ int am33xx_bbu_nand_xloadslots_register_handler(const char *name, int num_devicefiles); int am33xx_bbu_nand_slots_register_handler(const char *name, char **devicefile, int num_devicefiles); +int am33xx_bbu_nand_register_handler(const char *device); #else static inline int am33xx_bbu_nand_xloadslots_register_handler(const char *name, char **devicefile, @@ -37,6 +38,11 @@ static inline int am33xx_bbu_nand_slots_register_handler(const char *name, { return 0; } + +static inline int am33xx_bbu_nand_register_handler(const char *device) +{ + return 0; +} #endif #ifdef CONFIG_BAREBOX_UPDATE_AM33XX_EMMC diff --git a/arch/arm/mach-omap/include/mach/gpmc_nand.h b/arch/arm/mach-omap/include/mach/gpmc_nand.h index c9730a9454..f172b576eb 100644 --- a/arch/arm/mach-omap/include/mach/gpmc_nand.h +++ b/arch/arm/mach-omap/include/mach/gpmc_nand.h @@ -34,6 +34,7 @@ enum gpmc_ecc_mode { OMAP_ECC_HAMMING_CODE_HW_ROMCODE, OMAP_ECC_BCH8_CODE_HW, OMAP_ECC_BCH8_CODE_HW_ROMCODE, + OMAP_ECC_BCH16_CODE_HW, }; /** omap nand platform data structure */ diff --git a/arch/arm/mach-socfpga/include/mach/lowlevel.h b/arch/arm/mach-socfpga/include/mach/lowlevel.h index 03a2ea6435..657e07a881 100644 --- a/arch/arm/mach-socfpga/include/mach/lowlevel.h +++ b/arch/arm/mach-socfpga/include/mach/lowlevel.h @@ -72,7 +72,7 @@ static noinline void SECT(start_socfpga_c5_xload_common)(uint32_t size) { \ arm_cpu_lowlevel_init(); \ \ - arm_setup_stack(0xffff0000 + SZ_64K - SZ_4K - 16); \ + arm_setup_stack(0xffff0000 + SZ_64K - SZ_4K); \ \ start_socfpga_c5_xload_common(memory_size); \ } diff --git a/arch/arm/mach-tegra/include/mach/lowlevel.h b/arch/arm/mach-tegra/include/mach/lowlevel.h index c862778fc4..31f99eb175 100644 --- a/arch/arm/mach-tegra/include/mach/lowlevel.h +++ b/arch/arm/mach-tegra/include/mach/lowlevel.h @@ -261,7 +261,7 @@ void tegra_cpu_lowlevel_setup(char *fdt) r |= 0xd3; __asm__ __volatile__("msr cpsr, %0" : : "r"(r)); - arm_setup_stack(TEGRA_IRAM_BASE + SZ_256K - 8); + arm_setup_stack(TEGRA_IRAM_BASE + SZ_256K); if (tegra_cpu_is_maincomplex()) tegra_maincomplex_entry(fdt + get_runtime_offset()); diff --git a/arch/blackfin/include/asm/barebox.h b/arch/blackfin/include/asm/barebox.h deleted file mode 100644 index 2684f60a5f..0000000000 --- a/arch/blackfin/include/asm/barebox.h +++ /dev/null @@ -1,43 +0,0 @@ -/* - * barebox - barebox.h Structure declarations for board specific data - * - * Copyright (c) 2005 blackfin.uclinux.org - * - * (C) Copyright 2000-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#ifndef _BAREBOX_H_ -#define _BAREBOX_H_ 1 - -typedef struct bd_info { - int bi_baudrate; /* serial console baudrate */ - unsigned long bi_ip_addr; /* IP Address */ - unsigned char bi_enetaddr[6]; /* Ethernet adress */ - unsigned long bi_arch_number; /* unique id for this board */ - unsigned long bi_boot_params; /* where this board expects params */ - unsigned long bi_memstart; /* start of DRAM memory */ - unsigned long bi_memsize; /* size of DRAM memory in bytes */ - unsigned long bi_flashstart; /* start of FLASH memory */ - unsigned long bi_flashsize; /* size of FLASH memory */ - unsigned long bi_flashoffset; /* reserved area for startup monitor */ -} bd_t; - -#define bi_env_data bi_env->data -#define bi_env_crc bi_env->crc - -#endif /* _BAREBOX_H_ */ diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 728295d486..1395ad4c6f 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -10,6 +10,7 @@ config MIPS select HAVE_CONFIGURABLE_TEXT_BASE select HAVE_PBL_MULTI_IMAGES select HAS_DMA + select ARCH_HAS_DATA_ABORT_MASK select ELF default y diff --git a/arch/mips/configs/ath79_defconfig b/arch/mips/configs/ath79_defconfig index 83d22e4e1c..ab7af794a2 100644 --- a/arch/mips/configs/ath79_defconfig +++ b/arch/mips/configs/ath79_defconfig @@ -52,6 +52,7 @@ CONFIG_CMD_LED=y CONFIG_CMD_POWEROFF=y CONFIG_CMD_SPI=y CONFIG_CMD_LED_TRIGGER=y +CONFIG_CMD_WD=y CONFIG_CMD_BAREBOX_UPDATE=y CONFIG_CMD_OF_NODE=y CONFIG_CMD_OF_PROPERTY=y @@ -77,6 +78,10 @@ CONFIG_LED=y CONFIG_LED_GPIO=y CONFIG_LED_GPIO_OF=y CONFIG_LED_TRIGGERS=y +CONFIG_KEYBOARD_GPIO=y +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_POLLER=y +CONFIG_WATCHDOG_AR9344=y CONFIG_FS_TFTP=y CONFIG_FS_NFS=y CONFIG_DIGEST_SHA224_GENERIC=y diff --git a/arch/mips/dts/ar9331-dptechnics-dpt-module.dts b/arch/mips/dts/ar9331-dptechnics-dpt-module.dts index f0de46315c..315589aab9 100644 --- a/arch/mips/dts/ar9331-dptechnics-dpt-module.dts +++ b/arch/mips/dts/ar9331-dptechnics-dpt-module.dts @@ -24,6 +24,12 @@ barebox,default-trigger = "heartbeat"; }; }; + + gpio-keys { + button@0 { + gpios = <&gpio 11 GPIO_ACTIVE_HIGH>; + }; + }; }; &spiflash { diff --git a/arch/mips/include/asm/barebox.h b/arch/mips/include/asm/barebox.h deleted file mode 100644 index 2d13ee932f..0000000000 --- a/arch/mips/include/asm/barebox.h +++ /dev/null @@ -1,8 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ - -#ifndef _ASM_MIPS_BAREBOX_H_ -#define _ASM_MIPS_BAREBOX_H_ - -#define ARCH_HAS_DATA_ABORT_MASK - -#endif /* _ASM_MIPS_BAREBOX_H_ */ diff --git a/arch/mips/lib/bootm.c b/arch/mips/lib/bootm.c index f14540a4c4..5bb09cc2de 100644 --- a/arch/mips/lib/bootm.c +++ b/arch/mips/lib/bootm.c @@ -72,7 +72,7 @@ static int do_bootm_elf(struct image_data *data) shutdown_barebox(); - entry = (void *)elf->entry; + entry = (void *) (unsigned long) elf->entry; entry(-2, phys_to_virt((unsigned long)fdt)); diff --git a/arch/nios2/include/asm/barebox.h b/arch/nios2/include/asm/barebox.h deleted file mode 100644 index 9dd1df8e32..0000000000 --- a/arch/nios2/include/asm/barebox.h +++ /dev/null @@ -1,4 +0,0 @@ -#ifndef _ASM_BAREBOX_H_ -#define _ASM_BAREBOX_H_ - -#endif /* _ASM_BAREBOX_H_ */ diff --git a/arch/openrisc/include/asm/barebox.h b/arch/openrisc/include/asm/barebox.h deleted file mode 100644 index 9dd1df8e32..0000000000 --- a/arch/openrisc/include/asm/barebox.h +++ /dev/null @@ -1,4 +0,0 @@ -#ifndef _ASM_BAREBOX_H_ -#define _ASM_BAREBOX_H_ - -#endif /* _ASM_BAREBOX_H_ */ diff --git a/arch/ppc/include/asm/barebox.h b/arch/ppc/include/asm/barebox.h deleted file mode 100644 index 0c608b3079..0000000000 --- a/arch/ppc/include/asm/barebox.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * (C) Copyright 2000 - 2002 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * - ******************************************************************** - * NOTE: This header file defines an interface to barebox. Including - * this (unmodified) header file in another file is considered normal - * use of barebox, and does *not* fall under the heading of "derived - * work". - ******************************************************************** - */ - -#ifndef __BAREBOX_H__ -#define __BAREBOX_H__ - -#endif /* __BAREBOX_H__ */ diff --git a/arch/ppc/include/asm/common.h b/arch/ppc/include/asm/common.h index 045817bed2..b91f51e462 100644 --- a/arch/ppc/include/asm/common.h +++ b/arch/ppc/include/asm/common.h @@ -1,8 +1,6 @@ #ifndef __ASM_COMMON_H #define __ASM_COMMON_H -#include <asm/barebox.h> - extern unsigned long _text_base; unsigned long long get_ticks(void); diff --git a/arch/riscv/include/asm/barebox.h b/arch/riscv/include/asm/barebox.h deleted file mode 100644 index 2997587d82..0000000000 --- a/arch/riscv/include/asm/barebox.h +++ /dev/null @@ -1 +0,0 @@ -/* dummy */ diff --git a/arch/sandbox/Kconfig b/arch/sandbox/Kconfig index 5227cb624f..c20a9171a7 100644 --- a/arch/sandbox/Kconfig +++ b/arch/sandbox/Kconfig @@ -2,6 +2,8 @@ config SANDBOX bool select OFTREE select GPIOLIB + select ARCH_HAS_UBSAN_SANITIZE_ALL + select HAVE_ARCH_KASAN default y config ARCH_TEXT_BASE @@ -15,3 +17,9 @@ config LINUX config ARCH_LINUX bool + +config SANDBOX_UNWIND + bool + default y + select ARCH_HAS_STACK_DUMP + depends on UBSAN || KASAN diff --git a/arch/sandbox/Makefile b/arch/sandbox/Makefile index 85c70b5e80..52ad4850cb 100644 --- a/arch/sandbox/Makefile +++ b/arch/sandbox/Makefile @@ -45,11 +45,21 @@ ifeq ($(CONFIG_GPIO_LIBFTDI1),y) FTDI1_LIBS := $(shell pkg-config libftdi1 --libs) endif +ifeq ($(CONFIG_KASAN),y) +CPPFLAGS += -fsanitize=address +SANITIZER_LIBS += -fsanitize=address +endif + +ifeq ($(CONFIG_UBSAN),y) +SANITIZER_LIBS += -fsanitize=undefined +endif + cmd_barebox__ = $(CC) -o $@ -Wl,-T,$(barebox-lds) \ -Wl,--start-group $(barebox-common) -Wl,--end-group \ - -lrt -lpthread $(SDL_LIBS) $(FTDI1_LIBS) + -lrt -lpthread $(SDL_LIBS) $(FTDI1_LIBS) \ + $(SANITIZER_LIBS) -common-y += $(BOARD) arch/sandbox/os/ +common-y += $(BOARD) arch/sandbox/os/ arch/sandbox/lib/ common-$(CONFIG_OFTREE) += arch/sandbox/dts/ diff --git a/arch/sandbox/include/asm/barebox.h b/arch/sandbox/include/asm/barebox.h deleted file mode 100644 index 2997587d82..0000000000 --- a/arch/sandbox/include/asm/barebox.h +++ /dev/null @@ -1 +0,0 @@ -/* dummy */ diff --git a/arch/sandbox/lib/Makefile b/arch/sandbox/lib/Makefile new file mode 100644 index 0000000000..b32ca6aaf8 --- /dev/null +++ b/arch/sandbox/lib/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_ARCH_HAS_STACK_DUMP) += unwind.o diff --git a/arch/sandbox/lib/unwind.c b/arch/sandbox/lib/unwind.c new file mode 100644 index 0000000000..15a2798cc4 --- /dev/null +++ b/arch/sandbox/lib/unwind.c @@ -0,0 +1,11 @@ +// SPDX-License-Identifier: GPL-2.0-only +// Copyright 2019 Ahmad Fatoum + +#include <common.h> + +void __sanitizer_print_stack_trace(void); + +void dump_stack(void) +{ + __sanitizer_print_stack_trace(); +} diff --git a/arch/x86/include/asm/barebox.h b/arch/x86/include/asm/barebox.h deleted file mode 100644 index 473edb555c..0000000000 --- a/arch/x86/include/asm/barebox.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * Copyright (C) 2009 Juergen Beisert, Pengutronix - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * - */ - -/* nothing special yet */ diff --git a/commands/Kconfig b/commands/Kconfig index 039fd7d1ac..e03110fd46 100644 --- a/commands/Kconfig +++ b/commands/Kconfig @@ -2142,6 +2142,13 @@ config CMD_SEED help Seed the pseudo random number generator (PRNG) +config CMD_UBSAN + tristate "ubsan" + depends on UBSAN && COMMAND_SUPPORT + help + This is a test command for the undefined behavior sanitizer. + It triggers various undefined behavior, and detect it. + # end Miscellaneous commands endmenu diff --git a/commands/Makefile b/commands/Makefile index e69fb5046f..5cd35b78a7 100644 --- a/commands/Makefile +++ b/commands/Makefile @@ -123,3 +123,6 @@ obj-$(CONFIG_CMD_MMC_EXTCSD) += mmc_extcsd.o obj-$(CONFIG_CMD_NAND_BITFLIP) += nand-bitflip.o obj-$(CONFIG_CMD_SEED) += seed.o obj-$(CONFIG_CMD_IP_ROUTE_GET) += ip-route-get.o +obj-$(CONFIG_CMD_UBSAN) += ubsan.o + +UBSAN_SANITIZE_ubsan.o := y diff --git a/commands/edit.c b/commands/edit.c index 290222ce15..ba6a8c7cdd 100644 --- a/commands/edit.c +++ b/commands/edit.c @@ -524,12 +524,12 @@ static int do_edit(int argc, char *argv[]) } else delete_char(textx); break; - case 13: - case 10: + case '\r': + case '\n': split_line(); break; case 127: - case 8: + case '\b': if (textx > 0) { textx--; delete_char(textx); @@ -542,10 +542,10 @@ static int do_edit(int argc, char *argv[]) merge_line(curline); } break; - case 4: + case CTL_CH('d'): ret = save_file(argv[1]); goto out; - case 3: + case CTL_CH('c'): goto out; default: if ((signed char)c != -1) diff --git a/commands/mmc_extcsd.c b/commands/mmc_extcsd.c index c27bb722ea..ad8e9ad19f 100644 --- a/commands/mmc_extcsd.c +++ b/commands/mmc_extcsd.c @@ -222,8 +222,8 @@ static struct extcsd_reg extcsd[] = { .access = ACC_R, .width = 2, }, - [EXT_CSD_EXCEPTION_EVENTS_STATUS] = { - .name = "EXT_CSD_EXCEPTION_EVENTS_STATUS", + [EXT_CSD_EXCEPTION_DYNCAP_NEEDED] = { + .name = "EXT_CSD_EXCEPTION_DYNCAP_NEEDED", .access = ACC_R, .width = 1, }, @@ -1833,6 +1833,13 @@ static int print_field(u8 *reg, int index) printf("\t[4] EXTENDED_SECURITY_FAILURE: %i\n", val); return 1; + case EXT_CSD_EXCEPTION_DYNCAP_NEEDED: + if (get_field_val(EXT_CSD_EXCEPTION_EVENTS_STATUS, 2, 0x1)) { + val = get_field_val(EXT_CSD_EXCEPTION_DYNCAP_NEEDED, 0, 0x1); + printf("\t[0] DYNCAP_NEEDED: %i\n", val); + } + return 1; + case EXT_CSD_EXCEPTION_EVENTS_CTRL: val = get_field_val(EXT_CSD_EXCEPTION_EVENTS_CTRL, 1, 0x1); printf("\t[1] DYNCAP_EVENT_EN: %i\n", val); diff --git a/commands/ubsan.c b/commands/ubsan.c new file mode 100644 index 0000000000..784678d399 --- /dev/null +++ b/commands/ubsan.c @@ -0,0 +1,152 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <common.h> +#include <command.h> +#include <abort.h> + +struct test_ubsan { + const char *cmd; + void(*fun)(void); +}; + +static void test_ubsan_add_overflow(void) +{ + volatile int val = INT_MAX; + + val += 2; +} + +static void test_ubsan_sub_overflow(void) +{ + volatile int val = INT_MIN; + volatile int val2 = 2; + + val -= val2; +} + +static void test_ubsan_mul_overflow(void) +{ + volatile int val = INT_MAX / 2; + + val *= 3; +} + +static void test_ubsan_negate_overflow(void) +{ + volatile int val = INT_MIN; + + val = -val; +} + +static void test_ubsan_divrem_overflow(void) +{ + volatile int val = 16; + volatile int val2 = 0; + + val /= val2; +} + +static void test_ubsan_shift_out_of_bounds(void) +{ + volatile int val = -1; + int val2 = 10; + + val2 <<= val; +} + +static void test_ubsan_out_of_bounds(void) +{ + volatile int i = 4, j = 5; + volatile int arr[4]; + + arr[j] = i; +} + +static void test_ubsan_load_invalid_value(void) +{ + volatile char *dst, *src; + bool val, val2, *ptr; + char c = 4; + + dst = (char *)&val; + src = &c; + *dst = *src; + + ptr = &val2; + val2 = val; +} + +static void test_ubsan_null_ptr_deref(void) +{ + volatile int *ptr = NULL; + int val; + + data_abort_mask(); + val = *ptr; + data_abort_unmask(); +} + +static void test_ubsan_misaligned_access(void) +{ + volatile char arr[5] __aligned(4) = {1, 2, 3, 4, 5}; + volatile int *ptr, val = 6; + + ptr = (int *)(arr + 1); + *ptr = val; +} + +static void test_ubsan_object_size_mismatch(void) +{ + /* "((aligned(8)))" helps this not into be misaligned for ptr-access. */ + volatile int val __aligned(8) = 4; + volatile long long *ptr, val2; + + ptr = (long long *)&val; + val2 = *ptr; +} + +static const struct test_ubsan test_ubsan_array[] = { + { .cmd = "add", .fun = test_ubsan_add_overflow }, + { .cmd = "sub", .fun = test_ubsan_sub_overflow }, + { .cmd = "mul", .fun = test_ubsan_mul_overflow }, + { .cmd = "neg", .fun = test_ubsan_negate_overflow }, + { .cmd = "div", .fun = test_ubsan_divrem_overflow }, + { .cmd = "shift", .fun = test_ubsan_shift_out_of_bounds }, + { .cmd = "oob", .fun = test_ubsan_out_of_bounds }, + { .cmd = "trap", .fun = test_ubsan_load_invalid_value }, + { .cmd = "null", .fun = test_ubsan_null_ptr_deref }, + { .cmd = "align", .fun = test_ubsan_misaligned_access }, + { .cmd = "size", .fun = test_ubsan_object_size_mismatch }, + { /* sentinel */ } +}; + +static int do_ubsan(int argc, char *argv[]) +{ + const struct test_ubsan *test; + + if (argc != 2) + return COMMAND_ERROR_USAGE; + + for (test = test_ubsan_array; test->cmd; test++) { + if (strcmp(test->cmd, argv[1]) == 0) { + test->fun(); + return 0; + } + } + + return COMMAND_ERROR_USAGE; +} + +BAREBOX_CMD_HELP_START(ubsan) +BAREBOX_CMD_HELP_TEXT("trigger undefined behavior for UBSAN to detect") +BAREBOX_CMD_HELP_TEXT("") +BAREBOX_CMD_HELP_TEXT("Functions:") +BAREBOX_CMD_HELP_TEXT("add, sub, mul, neg, div, shift, oob, trap,") +BAREBOX_CMD_HELP_TEXT("null, align, size") +BAREBOX_CMD_HELP_END + +BAREBOX_CMD_START(ubsan) + .cmd = do_ubsan, + BAREBOX_CMD_DESC("trigger undefined behavior for UBSAN to detect") + BAREBOX_CMD_GROUP(CMD_GRP_MISC) + BAREBOX_CMD_HELP(cmd_ubsan_help) +BAREBOX_CMD_END diff --git a/common/Kconfig b/common/Kconfig index 8aad5baecd..cafaadb3d4 100644 --- a/common/Kconfig +++ b/common/Kconfig @@ -1295,6 +1295,15 @@ config PBL_BREAK If this enabled, barebox will be compiled with BKPT instruction on early pbl init. This option should be used only with JTAG debugger! +source "lib/Kconfig.ubsan" + +config KASAN + bool "KASAN: runtime memory debugger" + depends on HAVE_ARCH_KASAN + help + Enables KASAN (KernelAddressSANitizer) - runtime memory debugger, + designed to find out-of-bounds accesses and use-after-free bugs. + endmenu config HAS_DEBUG_LL @@ -1303,3 +1312,6 @@ config HAS_DEBUG_LL config DDR_SPD bool select CRC_ITU_T + +config HAVE_ARCH_KASAN + bool diff --git a/common/complete.c b/common/complete.c index 2dab7d1dde..919e5abc6a 100644 --- a/common/complete.c +++ b/common/complete.c @@ -277,7 +277,6 @@ static int env_param_complete(struct string_list *sl, char *instr, int eval) struct device_d *dev; struct variable_d *var; struct env_context *c; - char *instr_param; int len; char end = '=', *pos, *dot; char *begin = ""; @@ -317,7 +316,6 @@ static int env_param_complete(struct string_list *sl, char *instr, int eval) devname = xstrndup(instr, dot - instr); - instr_param++; dev = get_device_by_name(devname); free(devname); diff --git a/common/console.c b/common/console.c index ee17a508ba..d04aae58f9 100644 --- a/common/console.c +++ b/common/console.c @@ -253,20 +253,19 @@ static void console_set_stdoutpath(struct console_device *cdev) free(str); } -static int __console_puts(struct console_device *cdev, const char *s) +static int __console_puts(struct console_device *cdev, const char *s, + size_t nbytes) { - int n = 0; + size_t i; - while (*s) { - if (*s == '\n') { + for (i = 0; i < nbytes; i++) { + if (*s == '\n') cdev->putc(cdev, '\r'); - n++; - } + cdev->putc(cdev, *s); - n++; s++; } - return n; + return i; } static int fops_open(struct cdev *cdev, unsigned long flags) @@ -298,7 +297,7 @@ static ssize_t fops_write(struct cdev* dev, const void* buf, size_t count, { struct console_device *priv = dev->priv; - priv->puts(priv, buf); + priv->puts(priv, buf, count); return count; } @@ -324,6 +323,9 @@ int console_register(struct console_device *newcdev) dev->parent = newcdev->dev; platform_device_register(dev); + if (!newcdev->devname) + newcdev->devname = xstrdup(dev_name(dev)); + newcdev->open_count = 0; /* @@ -545,7 +547,7 @@ int console_puts(unsigned int ch, const char *str) if (initialized == CONSOLE_INIT_FULL) { for_each_console(cdev) { if (cdev->f_active & ch) { - n = cdev->puts(cdev, str); + n = cdev->puts(cdev, str, strlen(str)); } } return n; diff --git a/common/elf.c b/common/elf.c index 8edf388564..4733accb05 100644 --- a/common/elf.c +++ b/common/elf.c @@ -45,29 +45,31 @@ static void elf_release_regions(struct elf_image *elf) static int load_elf_phdr_segment(struct elf_image *elf, void *src, - Elf32_Phdr *phdr) + void *phdr) { - void *dst = (void *)phdr->p_paddr; + void *dst = (void *) elf_phdr_p_paddr(elf, phdr); int ret; + u64 p_filesz = elf_phdr_p_filesz(elf, phdr); + u64 p_memsz = elf_phdr_p_memsz(elf, phdr); /* we care only about PT_LOAD segments */ - if (phdr->p_type != PT_LOAD) + if (elf_phdr_p_type(elf, phdr) != PT_LOAD) return 0; - if (!phdr->p_filesz) + if (!p_filesz) return 0; - pr_debug("Loading phdr to 0x%p (%i bytes)\n", dst, phdr->p_filesz); + pr_debug("Loading phdr to 0x%p (%llu bytes)\n", dst, p_filesz); - ret = elf_request_region(elf, (resource_size_t)dst, phdr->p_filesz); + ret = elf_request_region(elf, (resource_size_t)dst, p_filesz); if (ret) return ret; - memcpy(dst, src, phdr->p_filesz); + memcpy(dst, src, p_filesz); - if (phdr->p_filesz < phdr->p_memsz) - memset(dst + phdr->p_filesz, 0x00, - phdr->p_memsz - phdr->p_filesz); + if (p_filesz < p_memsz) + memset(dst + p_filesz, 0x00, + p_memsz - p_filesz); return 0; } @@ -75,14 +77,13 @@ static int load_elf_phdr_segment(struct elf_image *elf, void *src, static int load_elf_image_phdr(struct elf_image *elf) { void *buf = elf->buf; - Elf32_Ehdr *ehdr = buf; - Elf32_Phdr *phdr = (Elf32_Phdr *)(buf + ehdr->e_phoff); + void *phdr = (void *) (buf + elf_hdr_e_phoff(elf, buf)); int i, ret; - elf->entry = ehdr->e_entry; + elf->entry = elf_hdr_e_entry(elf, buf); - for (i = 0; i < ehdr->e_phnum; ++i) { - void *src = buf + phdr->p_offset; + for (i = 0; i < elf_hdr_e_phnum(elf, buf) ; ++i) { + void *src = buf + elf_phdr_p_offset(elf, phdr); ret = load_elf_phdr_segment(elf, src, phdr); /* in case of error elf_load_image() caller should clean up and @@ -90,22 +91,22 @@ static int load_elf_image_phdr(struct elf_image *elf) if (ret) return ret; - ++phdr; + phdr += elf_size_of_phdr(elf); } return 0; } -static int elf_check_image(void *buf) +static int elf_check_image(struct elf_image *elf) { - Elf32_Ehdr *ehdr = (Elf32_Ehdr *)buf; - - if (strncmp(buf, ELFMAG, SELFMAG)) { + if (strncmp(elf->buf, ELFMAG, SELFMAG)) { pr_err("ELF magic not found.\n"); return -EINVAL; } - if (ehdr->e_type != ET_EXEC) { + elf->class = ((char *) elf->buf)[EI_CLASS]; + + if (elf_hdr_e_type(elf, elf->buf) != ET_EXEC) { pr_err("Non EXEC ELF image.\n"); return -ENOEXEC; } @@ -124,7 +125,7 @@ struct elf_image *elf_load_image(void *buf) elf->buf = buf; - ret = elf_check_image(buf); + ret = elf_check_image(elf); if (ret) return ERR_PTR(ret); diff --git a/common/ratp/mw.c b/common/ratp/mw.c index 55e79bbaf0..772910b39d 100644 --- a/common/ratp/mw.c +++ b/common/ratp/mw.c @@ -125,7 +125,7 @@ static int ratp_cmd_mw(const struct ratp_bb *req, int req_len, /* Validate buffer size */ if (buffer_size < (path_size + data_size)) { - pr_err("ignored: size mismatch (%d < %hu): path or data not be fully given\n", + pr_err("ignored: size mismatch (%d < %u): path or data not be fully given\n", req_len, path_size + data_size); ret = -EINVAL; goto out; diff --git a/common/ratp/ratp.c b/common/ratp/ratp.c index 9aea1786d6..e84ad22167 100644 --- a/common/ratp/ratp.c +++ b/common/ratp/ratp.c @@ -259,19 +259,17 @@ static int ratp_console_tstc(struct console_device *cdev) return kfifo_len(ctx->console_recv_fifo) ? 1 : 0; } -static int ratp_console_puts(struct console_device *cdev, const char *s) +static int ratp_console_puts(struct console_device *cdev, const char *s, + size_t nbytes) { struct ratp_ctx *ctx = container_of(cdev, struct ratp_ctx, ratp_console); - int len = 0; - - len = strlen(s); if (ratp_busy(&ctx->ratp)) - return len; + return nbytes; - kfifo_put(ctx->console_transmit_fifo, s, len); + kfifo_put(ctx->console_transmit_fifo, s, nbytes); - return len; + return nbytes; } static void ratp_console_putc(struct console_device *cdev, char c) diff --git a/common/startup.c b/common/startup.c index 92bf94f849..c6e119966a 100644 --- a/common/startup.c +++ b/common/startup.c @@ -202,7 +202,7 @@ void set_autoboot_state(enum autoboot_state autoboot) * do_autoboot_countdown - print autoboot countdown to console * * This prints the autoboot countdown to the console and waits for input. This - * evaluates the global.autoboot_about_key to determine which keys are allowed + * evaluates the global.autoboot_abort_key to determine which keys are allowed * to interrupt booting and also global.autoboot_timeout to determine the timeout * for the counter. This function can be called multiple times, it is executed * only the first time. @@ -221,13 +221,6 @@ enum autoboot_state do_autoboot_countdown(void) if (autoboot_state != AUTOBOOT_UNKNOWN) return autoboot_state; - globalvar_add_simple_enum("autoboot_abort_key", - &global_autoboot_abort_key, - global_autoboot_abort_keys, - ARRAY_SIZE(global_autoboot_abort_keys)); - globalvar_add_simple_int("autoboot_timeout", - &global_autoboot_timeout, "%u"); - menu_exists = stat(MENUFILE, &s) == 0; if (menu_exists) { @@ -272,6 +265,17 @@ static int run_init(void) enum autoboot_state autoboot; struct stat s; + /* + * Register autoboot variables here as they might be altered by + * init scripts. + */ + globalvar_add_simple_enum("autoboot_abort_key", + &global_autoboot_abort_key, + global_autoboot_abort_keys, + ARRAY_SIZE(global_autoboot_abort_keys)); + globalvar_add_simple_int("autoboot_timeout", + &global_autoboot_timeout, "%u"); + setenv("PATH", "/env/bin"); /* Run legacy /env/bin/init if it exists */ @@ -310,11 +314,11 @@ static int run_init(void) autoboot = do_autoboot_countdown(); + console_ctrlc_allow(); + if (autoboot == AUTOBOOT_BOOT) run_command("boot"); - console_ctrlc_allow(); - if (autoboot == AUTOBOOT_MENU) run_command(MENUFILE); diff --git a/drivers/bus/omap-gpmc.c b/drivers/bus/omap-gpmc.c index a3fccb2182..8fd7a91740 100644 --- a/drivers/bus/omap-gpmc.c +++ b/drivers/bus/omap-gpmc.c @@ -448,6 +448,9 @@ static struct dt_eccmode modes[] = { }, { .name = "bch8", .mode = OMAP_ECC_BCH8_CODE_HW_ROMCODE, + }, { + .name = "bch16", + .mode = OMAP_ECC_BCH16_CODE_HW, }, }; diff --git a/drivers/clk/zynqmp/clk-mux-zynqmp.c b/drivers/clk/zynqmp/clk-mux-zynqmp.c index 4003267bd1..4c15223980 100644 --- a/drivers/clk/zynqmp/clk-mux-zynqmp.c +++ b/drivers/clk/zynqmp/clk-mux-zynqmp.c @@ -15,7 +15,7 @@ #include "clk-zynqmp.h" -#define CLK_MUX_READ_ONLY BIT(3) +#define ZYNQMP_CLK_MUX_READ_ONLY BIT(3) struct zynqmp_clk_mux { struct clk clk; @@ -83,7 +83,7 @@ struct clk *zynqmp_clk_register_mux(const char *name, mux->ops = zynqmp_pm_get_eemi_ops(); mux->clk.name = strdup(name); - if (nodes->type_flag & CLK_MUX_READ_ONLY) + if (nodes->type_flag & ZYNQMP_CLK_MUX_READ_ONLY) mux->clk.ops = &zynqmp_clk_mux_ro_ops; else mux->clk.ops = &zynqmp_clk_mux_ops; diff --git a/drivers/eeprom/Kconfig b/drivers/eeprom/Kconfig index 0e36c824ec..6844480b07 100644 --- a/drivers/eeprom/Kconfig +++ b/drivers/eeprom/Kconfig @@ -9,6 +9,7 @@ config EEPROM_AT25 on your target board. config EEPROM_AT24 + select NVMEM bool "at24 based eeprom" depends on I2C help diff --git a/drivers/i2c/muxes/i2c-mux-pca954x.c b/drivers/i2c/muxes/i2c-mux-pca954x.c index d397e803b1..42bde5ed1c 100644 --- a/drivers/i2c/muxes/i2c-mux-pca954x.c +++ b/drivers/i2c/muxes/i2c-mux-pca954x.c @@ -177,7 +177,7 @@ static int pca954x_probe(struct device_d *dev) { struct i2c_client *client = to_i2c_client(dev); struct i2c_adapter *adap = to_i2c_adapter(client->dev.parent); - int num, force; + int num; struct pca954x *data; uintptr_t tmp; int ret = -ENODEV; @@ -195,10 +195,11 @@ static int pca954x_probe(struct device_d *dev) if (gpio_is_valid(gpio)) gpio_direction_output(gpio, 1); - /* Read the mux register at addr to verify - * that the mux is in fact present. + /* Write the mux register at addr to verify + * that the mux is in fact present. This also + * initializes the mux to disconnected state. */ - if (i2c_smbus_read_byte(client) < 0) { + if (i2c_smbus_write_byte(client, 0) < 0) { dev_warn(&client->dev, "probe failed\n"); goto exit_free; } @@ -220,8 +221,8 @@ static int pca954x_probe(struct device_d *dev) if (data->virt_adaps[num] == NULL) { ret = -ENODEV; dev_err(&client->dev, - "failed to register multiplexed adapter" - " %d as bus %d\n", num, force); + "failed to register multiplexed adapter%d\n", + num); goto virt_reg_failed; } } diff --git a/drivers/input/Kconfig b/drivers/input/Kconfig index 1f89ae3892..be061683fb 100644 --- a/drivers/input/Kconfig +++ b/drivers/input/Kconfig @@ -64,4 +64,10 @@ config KEYBOARD_USB help This driver implements support for usb keyboard. +config INPUT_SPECIALKEYS + bool "Special keys handler" + select INPUT + help + Say Y here to handle key events like KEY_RESTART and KEY_POWER. + endmenu diff --git a/drivers/input/Makefile b/drivers/input/Makefile index e694a98d10..36a4204d53 100644 --- a/drivers/input/Makefile +++ b/drivers/input/Makefile @@ -5,3 +5,4 @@ obj-$(CONFIG_KEYBOARD_GPIO) += gpio_keys.o obj-$(CONFIG_KEYBOARD_TWL6030) += twl6030_pwrbtn.o obj-$(CONFIG_KEYBOARD_IMX_KEYPAD) += imx_keypad.o obj-$(CONFIG_KEYBOARD_QT1070) += qt1070.o +obj-$(CONFIG_INPUT_SPECIALKEYS) += specialkeys.o diff --git a/drivers/input/specialkeys.c b/drivers/input/specialkeys.c new file mode 100644 index 0000000000..ff29b8455d --- /dev/null +++ b/drivers/input/specialkeys.c @@ -0,0 +1,36 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2019 Ahmad Fatoum, Pengutronix + +#include <common.h> +#include <restart.h> +#include <poweroff.h> +#include <init.h> +#include <input/input.h> +#include <dt-bindings/input/linux-event-codes.h> + +static void input_specialkeys_notify(struct input_notifier *in, + struct input_event *ev) +{ + switch (ev->code) { + case KEY_RESTART: + pr_info("Triggering reset due to special key.\n", ev->code); + restart_machine(); + break; + + case KEY_POWER: + pr_info("Triggering poweroff due to special key.\n", ev->code); + poweroff_machine(); + break; + } + + pr_debug("ignoring code: %d\n", ev->code); +} + +static struct input_notifier notifier; + +static int input_specialkeys_init(void) +{ + notifier.notify = input_specialkeys_notify; + return input_register_notfier(¬ifier); +} +late_initcall(input_specialkeys_init); diff --git a/drivers/mci/imx-esdhc-pbl.c b/drivers/mci/imx-esdhc-pbl.c index fb27c84163..aa93af656c 100644 --- a/drivers/mci/imx-esdhc-pbl.c +++ b/drivers/mci/imx-esdhc-pbl.c @@ -428,14 +428,12 @@ int imx8_esdhc_start_image(int instance) int imx8_esdhc_load_piggy(int instance) { - void *buf = (void *)MX8MQ_ATF_BL33_BASE_ADDR; + void *buf, *piggy; struct imx_flash_header_v2 *hdr = NULL; - void *bb = 0; struct esdhc esdhc; int ret, len; int offset = SZ_32K; - switch (instance) { case 0: esdhc.regs = IOMEM(MX8MQ_USDHC1_BASE_ADDR); @@ -450,6 +448,13 @@ int imx8_esdhc_load_piggy(int instance) esdhc.is_be = 0; esdhc.is_mx6 = 1; + /* + * We expect to be running at MX8MQ_ATF_BL33_BASE_ADDR where the atf + * has jumped to. Use a temporary buffer where we won't overwrite + * ourselves. + */ + buf = (void *)MX8MQ_ATF_BL33_BASE_ADDR + SZ_32M; + ret = esdhc_search_header(&esdhc, &hdr, buf, &offset); if (ret) return ret; @@ -462,13 +467,13 @@ int imx8_esdhc_load_piggy(int instance) /* * Calculate location of the piggydata at the offset loaded into RAM */ - buf = buf + offset + hdr->boot_data.size; + piggy = buf + offset + hdr->boot_data.size; + /* - * Barebox expects the piggydata right behind the PBL in the beginning - * of RAM. + * Copy the piggydata where the uncompressing code expects it */ - bb = (void *) MX8MQ_DDR_CSD1_BASE_ADDR + barebox_pbl_size; - memcpy(bb, buf, piggydata_size()); + memcpy(input_data, piggy, piggydata_size()); + return ret; } #endif diff --git a/drivers/mfd/rave-sp.c b/drivers/mfd/rave-sp.c index 1448c4143f..67f7d4c654 100644 --- a/drivers/mfd/rave-sp.c +++ b/drivers/mfd/rave-sp.c @@ -640,6 +640,7 @@ static int rave_sp_emulated_get_status(struct rave_sp *sp, [0] = RAVE_SP_CMD_GET_FIRMWARE_VERSION, [1] = 0, }; + u8 firmware_mode; int ret; ret = rave_sp_exec(sp, cmd, sizeof(cmd), &status->firmware_version, @@ -648,8 +649,21 @@ static int rave_sp_emulated_get_status(struct rave_sp *sp, return ret; cmd[0] = RAVE_SP_CMD_GET_BOOTLOADER_VERSION; - return rave_sp_exec(sp, cmd, sizeof(cmd), &status->bootloader_version, - sizeof(status->bootloader_version)); + ret = rave_sp_exec(sp, cmd, sizeof(cmd), &status->bootloader_version, + sizeof(status->bootloader_version)); + if (ret) + return ret; + + cmd[0] = RAVE_SP_CMD_GET_OPERATIONAL_MODE; + ret = rave_sp_exec(sp, cmd, sizeof(cmd), &firmware_mode, + sizeof(firmware_mode)); + if (ret) + return ret; + + status->general_status = + firmware_mode ? RAVE_SP_STATUS_GS_FIRMWARE_MODE : 0; + + return 0; } static int rave_sp_get_status(struct rave_sp *sp) diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig index 2b4a478a03..fadfe1f99b 100644 --- a/drivers/mtd/nand/Kconfig +++ b/drivers/mtd/nand/Kconfig @@ -90,6 +90,16 @@ config NAND_OMAP_GPMC Support for NAND flash using GPMC. GPMC is a common memory interface found on Texas Instrument's OMAP platforms +config MTD_NAND_OMAP_ELM + bool "Support for ELM (Error Location Module) on OMAP platforms" + depends on NAND_OMAP_GPMC + help + This config enables the ELM hardware engine, which can be used to + locate and correct errors when using BCH ECC scheme. This offloads + the cpu from doing ECC error searching and correction. However some + legacy OMAP families like OMAP2xxx, OMAP3xxx do not have ELM engine + so this is optional for them. + config NAND_ORION bool prompt "Marvell Orion NAND driver" diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile index 6088512745..a4066ba778 100644 --- a/drivers/mtd/nand/Makefile +++ b/drivers/mtd/nand/Makefile @@ -10,6 +10,7 @@ obj-$(CONFIG_MTD_NAND_NOMADIK) += nomadik_nand.o obj-$(CONFIG_NAND_IMX) += nand_imx.o obj-$(CONFIG_NAND_IMX_BBM) += nand_imx_bbm.o obj-$(CONFIG_NAND_OMAP_GPMC) += nand_omap_gpmc.o nand_omap_bch_decoder.o +obj-$(CONFIG_MTD_NAND_OMAP_ELM) += omap_elm.o obj-$(CONFIG_NAND_ORION) += nand_orion.o obj-$(CONFIG_NAND_MRVL_NFC) += nand_mrvl_nfc.o obj-$(CONFIG_NAND_ATMEL) += atmel_nand.o diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c index b4d4e79d91..f3875a5648 100644 --- a/drivers/mtd/nand/atmel_nand.c +++ b/drivers/mtd/nand/atmel_nand.c @@ -77,7 +77,6 @@ static struct nand_ecclayout atmel_oobinfo_small = { struct atmel_nand_host { struct nand_chip nand_chip; - struct mtd_info mtd; void __iomem *io_base; struct atmel_nand_data *board; struct device_d *dev; @@ -130,7 +129,7 @@ static void atmel_nand_disable(struct atmel_nand_host *host) */ static void atmel_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl) { - struct nand_chip *nand_chip = mtd->priv; + struct nand_chip *nand_chip = mtd_to_nand(mtd); struct atmel_nand_host *host = nand_chip->priv; if (ctrl & NAND_CTRL_CHANGE) { @@ -153,7 +152,7 @@ static void atmel_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl */ static int atmel_nand_device_ready(struct mtd_info *mtd) { - struct nand_chip *nand_chip = mtd->priv; + struct nand_chip *nand_chip = mtd_to_nand(mtd); struct atmel_nand_host *host = nand_chip->priv; return gpio_get_value(host->board->rdy_pin); @@ -164,28 +163,28 @@ static int atmel_nand_device_ready(struct mtd_info *mtd) */ static void atmel_read_buf(struct mtd_info *mtd, u8 *buf, int len) { - struct nand_chip *nand_chip = mtd->priv; + struct nand_chip *nand_chip = mtd_to_nand(mtd); readsb(nand_chip->IO_ADDR_R, buf, len); } static void atmel_read_buf16(struct mtd_info *mtd, u8 *buf, int len) { - struct nand_chip *nand_chip = mtd->priv; + struct nand_chip *nand_chip = mtd_to_nand(mtd); readsw(nand_chip->IO_ADDR_R, buf, len / 2); } static void atmel_write_buf(struct mtd_info *mtd, const u8 *buf, int len) { - struct nand_chip *nand_chip = mtd->priv; + struct nand_chip *nand_chip = mtd_to_nand(mtd); writesb(nand_chip->IO_ADDR_W, buf, len); } static void atmel_write_buf16(struct mtd_info *mtd, const u8 *buf, int len) { - struct nand_chip *nand_chip = mtd->priv; + struct nand_chip *nand_chip = mtd_to_nand(mtd); writesw(nand_chip->IO_ADDR_W, buf, len / 2); } @@ -277,7 +276,7 @@ static int pmecc_data_alloc(struct atmel_nand_host *host) static void pmecc_gen_syndrome(struct mtd_info *mtd, int sector) { - struct nand_chip *nand_chip = mtd->priv; + struct nand_chip *nand_chip = mtd_to_nand(mtd); struct atmel_nand_host *host = nand_chip->priv; int i; uint32_t value; @@ -294,7 +293,7 @@ static void pmecc_gen_syndrome(struct mtd_info *mtd, int sector) static void pmecc_substitute(struct mtd_info *mtd) { - struct nand_chip *nand_chip = mtd->priv; + struct nand_chip *nand_chip = mtd_to_nand(mtd); struct atmel_nand_host *host = nand_chip->priv; int16_t __iomem *alpha_to = host->pmecc_alpha_to; int16_t __iomem *index_of = host->pmecc_index_of; @@ -336,7 +335,7 @@ static void pmecc_substitute(struct mtd_info *mtd) static void pmecc_get_sigma(struct mtd_info *mtd) { - struct nand_chip *nand_chip = mtd->priv; + struct nand_chip *nand_chip = mtd_to_nand(mtd); struct atmel_nand_host *host = nand_chip->priv; int16_t *lmu = host->pmecc_lmu; @@ -494,7 +493,7 @@ static void pmecc_get_sigma(struct mtd_info *mtd) static int pmecc_err_location(struct mtd_info *mtd) { - struct nand_chip *nand_chip = mtd->priv; + struct nand_chip *nand_chip = mtd_to_nand(mtd); struct atmel_nand_host *host = nand_chip->priv; const int cap = host->board->pmecc_corr_cap; const int num = 2 * cap + 1; @@ -543,7 +542,7 @@ static int pmecc_err_location(struct mtd_info *mtd) static void pmecc_correct_data(struct mtd_info *mtd, uint8_t *buf, uint8_t *ecc, int sector_num, int extra_bytes, int err_nbr) { - struct nand_chip *nand_chip = mtd->priv; + struct nand_chip *nand_chip = mtd_to_nand(mtd); struct atmel_nand_host *host = nand_chip->priv; int i = 0; int byte_pos, bit_pos, sector_size, pos; @@ -589,7 +588,7 @@ static void pmecc_correct_data(struct mtd_info *mtd, uint8_t *buf, uint8_t *ecc, static int pmecc_correction(struct mtd_info *mtd, u32 pmecc_stat, uint8_t *buf, u8 *ecc) { - struct nand_chip *nand_chip = mtd->priv; + struct nand_chip *nand_chip = mtd_to_nand(mtd); struct atmel_nand_host *host = nand_chip->priv; int i, err_nbr, eccbytes; uint8_t *buf_pos; @@ -706,7 +705,7 @@ static int atmel_nand_pmecc_write_page(struct mtd_info *mtd, static void atmel_pmecc_core_init(struct mtd_info *mtd) { - struct nand_chip *nand_chip = mtd->priv; + struct nand_chip *nand_chip = mtd_to_nand(mtd); struct atmel_nand_host *host = nand_chip->priv; uint32_t val = 0; struct nand_ecclayout *ecc_layout; @@ -862,8 +861,8 @@ static int __init atmel_pmecc_nand_init_params(struct device_d *dev, struct atmel_nand_host *host) { struct resource *iores; - struct mtd_info *mtd = &host->mtd; struct nand_chip *nand_chip = &host->nand_chip; + struct mtd_info *mtd = &nand_chip->mtd; int cap, sector_size, err_no; int ret; @@ -983,7 +982,7 @@ static int __init atmel_pmecc_nand_init_params(struct device_d *dev, static int atmel_nand_calculate(struct mtd_info *mtd, const u_char *dat, unsigned char *ecc_code) { - struct nand_chip *nand_chip = mtd->priv; + struct nand_chip *nand_chip = mtd_to_nand(mtd); struct atmel_nand_host *host = nand_chip->priv; unsigned int ecc_value; @@ -1086,7 +1085,7 @@ static int atmel_nand_read_page(struct mtd_info *mtd, static int atmel_nand_correct(struct mtd_info *mtd, u_char *dat, u_char *read_ecc, u_char *isnull) { - struct nand_chip *nand_chip = mtd->priv; + struct nand_chip *nand_chip = mtd_to_nand(mtd); struct atmel_nand_host *host = nand_chip->priv; unsigned int ecc_status; unsigned int ecc_word, ecc_bit; @@ -1154,7 +1153,7 @@ static void atmel_nand_hwctl(struct mtd_info *mtd, int mode) { #if 0 if (cpu_is_at32ap7000()) { - struct nand_chip *nand_chip = mtd->priv; + struct nand_chip *nand_chip = mtd_to_nand(mtd); struct atmel_nand_host *host = nand_chip->priv; ecc_writel(host->ecc, CR, ATMEL_ECC_RST); } @@ -1251,8 +1250,8 @@ static int atmel_hw_nand_init_params(struct device_d *dev, struct atmel_nand_host *host) { struct resource *iores; - struct mtd_info *mtd = &host->mtd; struct nand_chip *nand_chip = &host->nand_chip; + struct mtd_info *mtd = &nand_chip->mtd; iores = dev_request_mem_resource(dev, 1); if (IS_ERR(iores)) @@ -1328,8 +1327,8 @@ static int __init atmel_nand_probe(struct device_d *dev) return PTR_ERR(iores); host->io_base = IOMEM(iores->start); - mtd = &host->mtd; nand_chip = &host->nand_chip; + mtd = &nand_chip->mtd; host->board = pdata; host->dev = dev; @@ -1342,7 +1341,6 @@ static int __init atmel_nand_probe(struct device_d *dev) } nand_chip->priv = host; /* link the private data structures */ - mtd->priv = nand_chip; mtd->parent = dev; /* Set address of NAND IO lines */ diff --git a/drivers/mtd/nand/denali.h b/drivers/mtd/nand/denali.h index 515353e277..7698b59720 100644 --- a/drivers/mtd/nand/denali.h +++ b/drivers/mtd/nand/denali.h @@ -464,7 +464,6 @@ struct nand_buf { #define DT 3 struct denali_nand_info { - struct mtd_info mtd; struct nand_chip nand; int flash_bank; /* currently selected chip */ int status; diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index 9c0c01694a..6b7d01919c 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -97,7 +97,7 @@ static int nand_do_write_oob(struct mtd_info *mtd, loff_t to, static int check_offs_len(struct mtd_info *mtd, loff_t ofs, uint64_t len) { - struct nand_chip *chip = mtd->priv; + struct nand_chip *chip = mtd_to_nand(mtd); int ret = 0; /* Start address must align on block boundary */ @@ -123,7 +123,7 @@ static int check_offs_len(struct mtd_info *mtd, */ static void nand_release_device(struct mtd_info *mtd) { - struct nand_chip *chip = mtd->priv; + struct nand_chip *chip = mtd_to_nand(mtd); /* Release the controller and the chip */ chip->controller->active = NULL; @@ -138,7 +138,7 @@ static void nand_release_device(struct mtd_info *mtd) */ static uint8_t nand_read_byte(struct mtd_info *mtd) { - struct nand_chip *chip = mtd->priv; + struct nand_chip *chip = mtd_to_nand(mtd); return readb(chip->IO_ADDR_R); } @@ -152,7 +152,7 @@ static uint8_t nand_read_byte(struct mtd_info *mtd) */ static uint8_t nand_read_byte16(struct mtd_info *mtd) { - struct nand_chip *chip = mtd->priv; + struct nand_chip *chip = mtd_to_nand(mtd); return (uint8_t) cpu_to_le16(readw(chip->IO_ADDR_R)); } @@ -164,7 +164,7 @@ static uint8_t nand_read_byte16(struct mtd_info *mtd) */ static u16 nand_read_word(struct mtd_info *mtd) { - struct nand_chip *chip = mtd->priv; + struct nand_chip *chip = mtd_to_nand(mtd); return readw(chip->IO_ADDR_R); } @@ -177,7 +177,7 @@ static u16 nand_read_word(struct mtd_info *mtd) */ static void nand_select_chip(struct mtd_info *mtd, int chipnr) { - struct nand_chip *chip = mtd->priv; + struct nand_chip *chip = mtd_to_nand(mtd); switch (chipnr) { case -1: @@ -203,7 +203,7 @@ static __maybe_unused void nand_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len) { int i; - struct nand_chip *chip = mtd->priv; + struct nand_chip *chip = mtd_to_nand(mtd); for (i = 0; i < len; i++) writeb(buf[i], chip->IO_ADDR_W); @@ -220,7 +220,7 @@ static __maybe_unused void nand_write_buf(struct mtd_info *mtd, static void nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len) { int i; - struct nand_chip *chip = mtd->priv; + struct nand_chip *chip = mtd_to_nand(mtd); for (i = 0; i < len; i++) buf[i] = readb(chip->IO_ADDR_R); @@ -238,7 +238,7 @@ static __maybe_unused void nand_write_buf16(struct mtd_info *mtd, const uint8_t *buf, int len) { int i; - struct nand_chip *chip = mtd->priv; + struct nand_chip *chip = mtd_to_nand(mtd); u16 *p = (u16 *) buf; len >>= 1; @@ -258,7 +258,7 @@ static __maybe_unused void nand_write_buf16(struct mtd_info *mtd, static void nand_read_buf16(struct mtd_info *mtd, uint8_t *buf, int len) { int i; - struct nand_chip *chip = mtd->priv; + struct nand_chip *chip = mtd_to_nand(mtd); u16 *p = (u16 *) buf; len >>= 1; @@ -277,7 +277,7 @@ static void nand_read_buf16(struct mtd_info *mtd, uint8_t *buf, int len) static int nand_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip) { int page, chipnr, res = 0, i = 0; - struct nand_chip *chip = mtd->priv; + struct nand_chip *chip = mtd_to_nand(mtd); u16 bad; if (chip->bbt_options & NAND_BBT_SCANLASTPAGE) @@ -337,7 +337,7 @@ static int nand_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip) */ static __maybe_unused int nand_default_block_markbad(struct mtd_info *mtd, loff_t ofs) { - struct nand_chip *chip = mtd->priv; + struct nand_chip *chip = mtd_to_nand(mtd); struct mtd_oob_ops ops; uint8_t buf[2] = { 0, 0 }; int ret = 0, res, i = 0; @@ -387,7 +387,7 @@ static __maybe_unused int nand_default_block_markbad(struct mtd_info *mtd, loff_ */ static int nand_block_markbad_lowlevel(struct mtd_info *mtd, loff_t ofs) { - struct nand_chip *chip = mtd->priv; + struct nand_chip *chip = mtd_to_nand(mtd); int res, ret = 0; if (!(chip->bbt_options & NAND_BBT_NO_OOB_BBM)) { @@ -431,7 +431,7 @@ static int nand_block_markbad_lowlevel(struct mtd_info *mtd, loff_t ofs) */ static int nand_block_markgood_lowlevel(struct mtd_info *mtd, loff_t ofs) { - struct nand_chip *chip = mtd->priv; + struct nand_chip *chip = mtd_to_nand(mtd); bool allow_erasebad; int ret; @@ -479,7 +479,7 @@ static int nand_block_markgood_lowlevel(struct mtd_info *mtd, loff_t ofs) */ static int nand_check_wp(struct mtd_info *mtd) { - struct nand_chip *chip = mtd->priv; + struct nand_chip *chip = mtd_to_nand(mtd); /* Broken xD cards report WP despite being writable */ if (chip->options & NAND_BROKEN_XD) @@ -503,7 +503,7 @@ static int nand_check_wp(struct mtd_info *mtd) static int nand_block_checkbad(struct mtd_info *mtd, loff_t ofs, int getchip, int allowbbt) { - struct nand_chip *chip = mtd->priv; + struct nand_chip *chip = mtd_to_nand(mtd); if (IS_ENABLED(CONFIG_NAND_BBT) && chip->bbt) { /* Return info from the table */ @@ -516,7 +516,7 @@ static int nand_block_checkbad(struct mtd_info *mtd, loff_t ofs, int getchip, /* Wait for the ready pin, after a command. The timeout is caught later. */ void nand_wait_ready(struct mtd_info *mtd) { - struct nand_chip *chip = mtd->priv; + struct nand_chip *chip = mtd_to_nand(mtd); uint64_t start = get_time_ns(); /* wait until command is processed or timeout occures */ @@ -539,7 +539,7 @@ void nand_wait_ready(struct mtd_info *mtd) static void nand_command(struct mtd_info *mtd, unsigned int command, int column, int page_addr) { - register struct nand_chip *chip = mtd->priv; + register struct nand_chip *chip = mtd_to_nand(mtd); int ctrl = NAND_CTRL_CLE | NAND_CTRL_CHANGE; /* Write out the command to the device */ @@ -641,7 +641,7 @@ static void nand_command(struct mtd_info *mtd, unsigned int command, static void nand_command_lp(struct mtd_info *mtd, unsigned int command, int column, int page_addr) { - register struct nand_chip *chip = mtd->priv; + register struct nand_chip *chip = mtd_to_nand(mtd); /* Emulate NAND_CMD_READOOB */ if (command == NAND_CMD_READOOB) { @@ -748,7 +748,7 @@ static void nand_command_lp(struct mtd_info *mtd, unsigned int command, static int nand_get_device(struct mtd_info *mtd, int new_state) { - struct nand_chip *chip = mtd->priv; + struct nand_chip *chip = mtd_to_nand(mtd); retry: /* Hardware controller shared among independent devices */ @@ -826,7 +826,7 @@ static int __nand_unlock(struct mtd_info *mtd, loff_t ofs, { int ret = 0; int status, page; - struct nand_chip *chip = mtd->priv; + struct nand_chip *chip = mtd_to_nand(mtd); /* Submit address of first page to unlock */ page = ofs >> chip->page_shift; @@ -861,7 +861,7 @@ int nand_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len) { int ret = 0; int chipnr; - struct nand_chip *chip = mtd->priv; + struct nand_chip *chip = mtd_to_nand(mtd); pr_debug("%s: start = 0x%012llx, len = %llu\n", __func__, (unsigned long long)ofs, len); @@ -924,7 +924,7 @@ int nand_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len) { int ret = 0; int chipnr, status, page; - struct nand_chip *chip = mtd->priv; + struct nand_chip *chip = mtd_to_nand(mtd); pr_debug("%s: start = 0x%012llx, len = %llu\n", __func__, (unsigned long long)ofs, len); @@ -1537,7 +1537,7 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from, struct mtd_oob_ops *ops) { int chipnr, page, realpage, col, bytes, aligned, oob_required; - struct nand_chip *chip = mtd->priv; + struct nand_chip *chip = mtd_to_nand(mtd); struct mtd_ecc_stats stats; int ret = 0; uint32_t readlen = ops->len; @@ -1854,7 +1854,7 @@ static int nand_do_read_oob(struct mtd_info *mtd, loff_t from, struct mtd_oob_ops *ops) { int page, realpage, chipnr; - struct nand_chip *chip = mtd->priv; + struct nand_chip *chip = mtd_to_nand(mtd); struct mtd_ecc_stats stats; int readlen = ops->ooblen; int len; @@ -2317,7 +2317,7 @@ static int nand_write_page(struct mtd_info *mtd, struct nand_chip *chip, static uint8_t *nand_fill_oob(struct mtd_info *mtd, uint8_t *oob, size_t len, struct mtd_oob_ops *ops) { - struct nand_chip *chip = mtd->priv; + struct nand_chip *chip = mtd_to_nand(mtd); /* * Initialise to all 0xFF, to avoid the possibility of left over OOB @@ -2377,7 +2377,7 @@ static int nand_do_write_ops(struct mtd_info *mtd, loff_t to, struct mtd_oob_ops *ops) { int chipnr, realpage, page, blockmask, column; - struct nand_chip *chip = mtd->priv; + struct nand_chip *chip = mtd_to_nand(mtd); uint32_t writelen = ops->len; uint32_t oobwritelen = ops->ooblen; @@ -2522,7 +2522,7 @@ static int nand_do_write_oob(struct mtd_info *mtd, loff_t to, struct mtd_oob_ops *ops) { int chipnr, page, status, len; - struct nand_chip *chip = mtd->priv; + struct nand_chip *chip = mtd_to_nand(mtd); if (!IS_ENABLED(CONFIG_MTD_WRITE)) return -ENOTSUPP; @@ -2653,7 +2653,7 @@ out: */ static void single_erase_cmd(struct mtd_info *mtd, int page) { - struct nand_chip *chip = mtd->priv; + struct nand_chip *chip = mtd_to_nand(mtd); if (!IS_ENABLED(CONFIG_MTD_WRITE)) return; @@ -2690,7 +2690,7 @@ int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr, int allowbbt) { int page, status, pages_per_block, ret, chipnr; - struct nand_chip *chip = mtd->priv; + struct nand_chip *chip = mtd_to_nand(mtd); loff_t len; if (!IS_ENABLED(CONFIG_MTD_WRITE)) @@ -3517,7 +3517,7 @@ ident_done: */ void nand_of_parse_node(struct mtd_info *mtd, struct device_node *np) { - struct nand_chip *chip = mtd->priv; + struct nand_chip *chip = mtd_to_nand(mtd); int ecc_strength, ecc_size; if (!IS_ENABLED(CONFIG_OFDEVICE)) @@ -3548,7 +3548,7 @@ int nand_scan_ident(struct mtd_info *mtd, int maxchips, struct nand_flash_dev *table) { int i, busw, nand_maf_id, nand_dev_id; - struct nand_chip *chip = mtd->priv; + struct nand_chip *chip = mtd_to_nand(mtd); struct nand_flash_dev *type; /* Get buswidth to select the correct functions */ @@ -3607,7 +3607,7 @@ EXPORT_SYMBOL(nand_scan_ident); int nand_scan_tail(struct mtd_info *mtd) { int i; - struct nand_chip *chip = mtd->priv; + struct nand_chip *chip = mtd_to_nand(mtd); /* New bad blocks should be marked in OOB, flash-based BBT, or both */ BUG_ON((chip->bbt_options & NAND_BBT_NO_OOB_BBM) && @@ -3908,7 +3908,7 @@ EXPORT_SYMBOL(nand_scan); */ void nand_release(struct mtd_info *mtd) { - struct nand_chip *chip = mtd->priv; + struct nand_chip *chip = mtd_to_nand(mtd); if (chip->ecc.mode == NAND_ECC_SOFT_BCH) nand_bch_free((struct nand_bch_control *)chip->ecc.priv); @@ -3960,7 +3960,7 @@ static const char *bbt_type_strings[] = { static int mtd_get_bbt_type(struct param_d *p, void *priv) { struct mtd_info *mtd = priv; - struct nand_chip *chip = mtd->priv; + struct nand_chip *chip = mtd_to_nand(mtd); enum bbt_type type; if (!chip->bbt) @@ -3978,7 +3978,7 @@ static int mtd_get_bbt_type(struct param_d *p, void *priv) int add_mtd_nand_device(struct mtd_info *mtd, char *devname) { - struct nand_chip *chip = mtd->priv; + struct nand_chip *chip = mtd_to_nand(mtd); int ret; ret = add_mtd_device(mtd, devname, DEVICE_ID_DYNAMIC); diff --git a/drivers/mtd/nand/nand_bbt.c b/drivers/mtd/nand/nand_bbt.c index a908a36544..ed4104629a 100644 --- a/drivers/mtd/nand/nand_bbt.c +++ b/drivers/mtd/nand/nand_bbt.c @@ -177,7 +177,7 @@ static int read_bbt(struct mtd_info *mtd, uint8_t *buf, int page, int num, struct nand_bbt_descr *td, int offs) { int res, ret = 0, i, j, act = 0; - struct nand_chip *this = mtd->priv; + struct nand_chip *this = mtd_to_nand(mtd); size_t retlen, len, totlen; loff_t from; int bits = td->options & NAND_BBT_NRBITS_MSK; @@ -264,7 +264,7 @@ static int read_bbt(struct mtd_info *mtd, uint8_t *buf, int page, int num, */ static int read_abs_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *td, int chip) { - struct nand_chip *this = mtd->priv; + struct nand_chip *this = mtd_to_nand(mtd); int res = 0, i; if (td->options & NAND_BBT_PERCHIP) { @@ -389,7 +389,7 @@ static u32 bbt_get_ver_offs(struct mtd_info *mtd, struct nand_bbt_descr *td) static void read_abs_bbts(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *td, struct nand_bbt_descr *md) { - struct nand_chip *this = mtd->priv; + struct nand_chip *this = mtd_to_nand(mtd); /* Read the primary version, if available */ if (td->options & NAND_BBT_VERSION) { @@ -455,7 +455,7 @@ static int scan_block_fast(struct mtd_info *mtd, struct nand_bbt_descr *bd, static int create_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *bd, int chip) { - struct nand_chip *this = mtd->priv; + struct nand_chip *this = mtd_to_nand(mtd); int i, numblocks, numpages; int startblock; loff_t from; @@ -524,7 +524,7 @@ static int create_bbt(struct mtd_info *mtd, uint8_t *buf, */ static int search_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *td) { - struct nand_chip *this = mtd->priv; + struct nand_chip *this = mtd_to_nand(mtd); int i, chips; int startblock, block, dir; int scanlen = mtd->writesize + mtd->oobsize; @@ -684,7 +684,7 @@ static void mark_bbt_block_bad(struct mtd_info *mtd, struct nand_bbt_descr *td, int chip, int block) { - struct nand_chip *this = mtd->priv; + struct nand_chip *this = mtd_to_nand(mtd); loff_t to; int res; @@ -713,7 +713,7 @@ static int write_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *td, struct nand_bbt_descr *md, int chipsel) { - struct nand_chip *this = mtd->priv; + struct nand_chip *this = mtd_to_nand(mtd); struct erase_info einfo; int i, res, chip = 0; int bits, page, offs, numblocks, sft, sftmsk; @@ -897,7 +897,7 @@ static int write_bbt(struct mtd_info *mtd, uint8_t *buf, */ static inline int nand_memory_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd) { - struct nand_chip *this = mtd->priv; + struct nand_chip *this = mtd_to_nand(mtd); return create_bbt(mtd, this->buffers->databuf, bd, -1); } @@ -916,7 +916,7 @@ static inline int nand_memory_bbt(struct mtd_info *mtd, struct nand_bbt_descr *b static int check_create(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *bd) { int i, chips, writeops, create, chipsel, res, res2; - struct nand_chip *this = mtd->priv; + struct nand_chip *this = mtd_to_nand(mtd); struct nand_bbt_descr *td = this->bbt_td; struct nand_bbt_descr *md = this->bbt_md; struct nand_bbt_descr *rd, *rd2; @@ -1040,7 +1040,7 @@ static int check_create(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_desc */ static void mark_bbt_region(struct mtd_info *mtd, struct nand_bbt_descr *td) { - struct nand_chip *this = mtd->priv; + struct nand_chip *this = mtd_to_nand(mtd); int i, j, chips, block, nrblocks, update; uint8_t oldval; @@ -1100,7 +1100,7 @@ static void mark_bbt_region(struct mtd_info *mtd, struct nand_bbt_descr *td) */ static void verify_bbt_descr(struct mtd_info *mtd, struct nand_bbt_descr *bd) { - struct nand_chip *this = mtd->priv; + struct nand_chip *this = mtd_to_nand(mtd); u32 pattern_len; u32 bits; u32 table_size; @@ -1152,7 +1152,7 @@ static void verify_bbt_descr(struct mtd_info *mtd, struct nand_bbt_descr *bd) */ static int nand_scan_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd) { - struct nand_chip *this = mtd->priv; + struct nand_chip *this = mtd_to_nand(mtd); int len, res; uint8_t *buf; struct nand_bbt_descr *td = this->bbt_td; @@ -1225,7 +1225,7 @@ err: */ int nand_update_bbt(struct mtd_info *mtd, loff_t offs) { - struct nand_chip *this = mtd->priv; + struct nand_chip *this = mtd_to_nand(mtd); int len, res = 0; int chip, chipsel; uint8_t *buf; @@ -1359,7 +1359,7 @@ static int nand_create_badblock_pattern(struct nand_chip *this) */ int nand_default_bbt(struct mtd_info *mtd) { - struct nand_chip *this = mtd->priv; + struct nand_chip *this = mtd_to_nand(mtd); int ret; /* Is a flash based bad block table requested? */ @@ -1396,7 +1396,7 @@ int nand_default_bbt(struct mtd_info *mtd) */ int nand_isbad_bbt(struct mtd_info *mtd, loff_t offs, int allowbbt) { - struct nand_chip *this = mtd->priv; + struct nand_chip *this = mtd_to_nand(mtd); int block; uint8_t res; @@ -1419,7 +1419,7 @@ int nand_isbad_bbt(struct mtd_info *mtd, loff_t offs, int allowbbt) static int nand_mark_bbt(struct mtd_info *mtd, loff_t offs, uint8_t mark) { - struct nand_chip *this = mtd->priv; + struct nand_chip *this = mtd_to_nand(mtd); int block, ret = 0; block = (int)(offs >> this->bbt_erase_shift); diff --git a/drivers/mtd/nand/nand_bch.c b/drivers/mtd/nand/nand_bch.c index d4f2a8cbe4..b94ecdf8d9 100644 --- a/drivers/mtd/nand/nand_bch.c +++ b/drivers/mtd/nand/nand_bch.c @@ -49,7 +49,7 @@ struct nand_bch_control { int nand_bch_calculate_ecc(struct mtd_info *mtd, const unsigned char *buf, unsigned char *code) { - const struct nand_chip *chip = mtd->priv; + const struct nand_chip *chip = mtd_to_nand(mtd); struct nand_bch_control *nbc = chip->ecc.priv; unsigned int i; @@ -76,7 +76,7 @@ EXPORT_SYMBOL(nand_bch_calculate_ecc); int nand_bch_correct_data(struct mtd_info *mtd, unsigned char *buf, unsigned char *read_ecc, unsigned char *calc_ecc) { - const struct nand_chip *chip = mtd->priv; + const struct nand_chip *chip = mtd_to_nand(mtd); struct nand_bch_control *nbc = chip->ecc.priv; unsigned int *errloc = nbc->errloc; int i, count; @@ -119,7 +119,7 @@ EXPORT_SYMBOL(nand_bch_correct_data); */ struct nand_bch_control *nand_bch_init(struct mtd_info *mtd) { - struct nand_chip *nand = mtd->priv; + struct nand_chip *nand = mtd_to_nand(mtd); unsigned int m, t, eccsteps, i; struct nand_ecclayout *layout = nand->ecc.layout; struct nand_bch_control *nbc = NULL; diff --git a/drivers/mtd/nand/nand_denali.c b/drivers/mtd/nand/nand_denali.c index 2561966243..ddb03813fe 100644 --- a/drivers/mtd/nand/nand_denali.c +++ b/drivers/mtd/nand/nand_denali.c @@ -76,7 +76,12 @@ static uint32_t denali_irq_mask = DENALI_IRQ_ALL; * this macro allows us to convert from an MTD structure to our own * device context (denali) structure. */ -#define mtd_to_denali(m) container_of(m, struct denali_nand_info, mtd) +static inline struct denali_nand_info *mtd_to_denali(struct mtd_info *mtd) +{ + struct nand_chip *nand = mtd_to_nand(mtd); + + return container_of(nand, struct denali_nand_info, nand); +} /* * These constants are defined by the driver to enable common driver @@ -929,7 +934,7 @@ static bool handle_ecc(struct denali_nand_info *denali, uint8_t *buf, err_device; /* correct the ECC error */ buf[offset] ^= err_correction_value; - denali->mtd.ecc_stats.corrected++; + denali->nand.mtd.ecc_stats.corrected++; bitflips++; } } else { @@ -997,7 +1002,7 @@ static int write_page(struct mtd_info *mtd, struct nand_chip *chip, { struct denali_nand_info *denali = mtd_to_denali(mtd); dma_addr_t addr = (unsigned long)denali->buf.buf; - size_t size = denali->mtd.writesize + denali->mtd.oobsize; + size_t size = mtd->writesize + mtd->oobsize; uint32_t irq_status; uint32_t irq_mask = INTR_STATUS__DMA_CMD_COMP | INTR_STATUS__PROGRAM_FAIL; @@ -1094,7 +1099,7 @@ static int denali_read_page(struct mtd_info *mtd, struct nand_chip *chip, struct denali_nand_info *denali = mtd_to_denali(mtd); dma_addr_t addr = (unsigned long)denali->buf.buf; - size_t size = denali->mtd.writesize + denali->mtd.oobsize; + size_t size = mtd->writesize + mtd->oobsize; uint32_t irq_status; uint32_t irq_mask = denali->have_hw_ecc_fixup ? @@ -1132,19 +1137,19 @@ static int denali_read_page(struct mtd_info *mtd, struct nand_chip *chip, /* When we have hw ecc fixup, don't check oob. * That code below looks jacked up anyway. I mean, * look at it, wtf? */ - if (!is_erased(buf, denali->mtd.writesize)) - denali->mtd.ecc_stats.failed++; + if (!is_erased(buf, mtd->writesize)) + mtd->ecc_stats.failed++; } else { - read_oob_data(&denali->mtd, chip->oob_poi, + read_oob_data(&denali->nand.mtd, chip->oob_poi, denali->page); /* check ECC failures that may have occurred on * erased pages */ if (check_erased_page) { - if (!is_erased(buf, denali->mtd.writesize)) - denali->mtd.ecc_stats.failed++; - if (!is_erased(buf, denali->mtd.oobsize)) - denali->mtd.ecc_stats.failed++; + if (!is_erased(buf, mtd->writesize)) + mtd->ecc_stats.failed++; + if (!is_erased(buf, mtd->oobsize)) + mtd->ecc_stats.failed++; } } } @@ -1156,7 +1161,7 @@ static int denali_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip, { struct denali_nand_info *denali = mtd_to_denali(mtd); dma_addr_t addr = (unsigned long)denali->buf.buf; - size_t size = denali->mtd.writesize + denali->mtd.oobsize; + size_t size = mtd->writesize + mtd->oobsize; uint32_t irq_mask = INTR_STATUS__DMA_CMD_COMP; if (page != denali->page) { @@ -1372,6 +1377,8 @@ static void denali_drv_init(struct denali_nand_info *denali) int denali_init(struct denali_nand_info *denali) { + struct nand_chip *nand = &denali->nand; + struct mtd_info *mtd = &nand->mtd; int ret = 0; uint32_t val; @@ -1391,34 +1398,33 @@ int denali_init(struct denali_nand_info *denali) if (!denali->buf.buf) return -ENOMEM; - denali->mtd.parent = denali->dev; + mtd->parent = denali->dev; denali_hw_init(denali); denali_drv_init(denali); denali_set_intr_modes(denali, true); - denali->mtd.name = "denali-nand"; - denali->mtd.priv = &denali->nand; + mtd->name = "denali-nand"; /* register the driver with the NAND core subsystem */ - denali->nand.read_buf = denali_read_buf; - denali->nand.select_chip = denali_select_chip; - denali->nand.cmdfunc = denali_cmdfunc; - denali->nand.read_byte = denali_read_byte; - denali->nand.waitfunc = denali_waitfunc; + nand->read_buf = denali_read_buf; + nand->select_chip = denali_select_chip; + nand->cmdfunc = denali_cmdfunc; + nand->read_byte = denali_read_byte; + nand->waitfunc = denali_waitfunc; /* * scan for NAND devices attached to the controller * this is the first stage in a two step process to register * with the nand subsystem */ - if (nand_scan_ident(&denali->mtd, denali->max_banks, NULL)) { + if (nand_scan_ident(mtd, denali->max_banks, NULL)) { ret = -ENXIO; goto failed_req_irq; } /* allocate the right size buffer now */ kfree(denali->buf.buf); - denali->buf.buf = kzalloc(denali->mtd.writesize + denali->mtd.oobsize, + denali->buf.buf = kzalloc(mtd->writesize + mtd->oobsize, GFP_KERNEL); if (!denali->buf.buf) { ret = -ENOMEM; @@ -1431,17 +1437,16 @@ int denali_init(struct denali_nand_info *denali) * the real pagesize and anything necessery */ denali->devnum = ioread32(denali->flash_reg + DEVICES_CONNECTED); - denali->nand.chipsize <<= (denali->devnum - 1); - denali->nand.page_shift += (denali->devnum - 1); - denali->nand.pagemask = (denali->nand.chipsize >> - denali->nand.page_shift) - 1; - denali->nand.bbt_erase_shift += (denali->devnum - 1); - denali->nand.phys_erase_shift = denali->nand.bbt_erase_shift; - denali->nand.chip_shift += (denali->devnum - 1); - denali->mtd.writesize <<= (denali->devnum - 1); - denali->mtd.oobsize <<= (denali->devnum - 1); - denali->mtd.erasesize <<= (denali->devnum - 1); - denali->mtd.size = denali->nand.numchips * denali->nand.chipsize; + nand->chipsize <<= (denali->devnum - 1); + nand->page_shift += (denali->devnum - 1); + nand->pagemask = (nand->chipsize >> nand->page_shift) - 1; + nand->bbt_erase_shift += (denali->devnum - 1); + nand->phys_erase_shift = nand->bbt_erase_shift; + nand->chip_shift += (denali->devnum - 1); + mtd->writesize <<= (denali->devnum - 1); + mtd->oobsize <<= (denali->devnum - 1); + mtd->erasesize <<= (denali->devnum - 1); + mtd->size = nand->numchips * nand->chipsize; denali->bbtskipbytes *= denali->devnum; /* @@ -1453,19 +1458,19 @@ int denali_init(struct denali_nand_info *denali) /* Bad block table description is set by nand framework, see nand_bbt.c */ - denali->nand.bbt_options |= NAND_BBT_USE_FLASH; - denali->nand.ecc.mode = NAND_ECC_HW_SYNDROME; + nand->bbt_options |= NAND_BBT_USE_FLASH; + nand->ecc.mode = NAND_ECC_HW_SYNDROME; if (denali->have_hw_ecc_fixup) { /* We have OOB support, so allow scan of BBT and leave the OOB alone */ - denali->nand.bbt_options |= NAND_BBT_NO_OOB; + nand->bbt_options |= NAND_BBT_NO_OOB; } else { /* skip the scan for now until we have OOB read and write support */ - denali->nand.options |= NAND_SKIP_BBTSCAN; + nand->options |= NAND_SKIP_BBTSCAN; } /* no subpage writes on denali */ - denali->nand.options |= NAND_NO_SUBPAGE_WRITE; + nand->options |= NAND_NO_SUBPAGE_WRITE; /* * Denali Controller only support 15bit and 8bit ECC in MRST, @@ -1473,34 +1478,34 @@ int denali_init(struct denali_nand_info *denali) * SLC if possible. * */ if (!nand_is_slc(&denali->nand) && - (denali->mtd.oobsize > (denali->bbtskipbytes + - ECC_15BITS * (denali->mtd.writesize / + (mtd->oobsize > (denali->bbtskipbytes + + ECC_15BITS * (mtd->writesize / ECC_SECTOR_SIZE)))) { /* if MLC OOB size is large enough, use 15bit ECC*/ - denali->nand.ecc.strength = 15; - denali->nand.ecc.layout = &nand_15bit_oob; - denali->nand.ecc.bytes = ECC_15BITS; + nand->ecc.strength = 15; + nand->ecc.layout = &nand_15bit_oob; + nand->ecc.bytes = ECC_15BITS; iowrite32(15, denali->flash_reg + ECC_CORRECTION); - } else if (denali->mtd.oobsize < (denali->bbtskipbytes + - ECC_8BITS * (denali->mtd.writesize / + } else if (mtd->oobsize < (denali->bbtskipbytes + + ECC_8BITS * (mtd->writesize / ECC_SECTOR_SIZE))) { pr_err("Your NAND chip OOB is not large enough to contain 8bit ECC correction codes"); goto failed_req_irq; } else { - denali->nand.ecc.strength = 8; - denali->nand.ecc.layout = &nand_8bit_oob; - denali->nand.ecc.bytes = ECC_8BITS; + nand->ecc.strength = 8; + nand->ecc.layout = &nand_8bit_oob; + nand->ecc.bytes = ECC_8BITS; iowrite32(8, denali->flash_reg + ECC_CORRECTION); } - denali->nand.ecc.bytes *= denali->devnum; - denali->nand.ecc.strength *= denali->devnum; - denali->nand.ecc.layout->eccbytes *= - denali->mtd.writesize / ECC_SECTOR_SIZE; - denali->nand.ecc.layout->oobfree[0].offset = - denali->bbtskipbytes + denali->nand.ecc.layout->eccbytes; - denali->nand.ecc.layout->oobfree[0].length = - denali->mtd.oobsize - denali->nand.ecc.layout->eccbytes - + nand->ecc.bytes *= denali->devnum; + nand->ecc.strength *= denali->devnum; + nand->ecc.layout->eccbytes *= + mtd->writesize / ECC_SECTOR_SIZE; + nand->ecc.layout->oobfree[0].offset = + denali->bbtskipbytes + nand->ecc.layout->eccbytes; + nand->ecc.layout->oobfree[0].length = + mtd->oobsize - nand->ecc.layout->eccbytes - denali->bbtskipbytes; /* @@ -1508,17 +1513,17 @@ int denali_init(struct denali_nand_info *denali) * contained by each nand chip. blksperchip will help driver to * know how many blocks is taken by FW. */ - denali->totalblks = denali->mtd.size >> denali->nand.phys_erase_shift; - denali->blksperchip = denali->totalblks / denali->nand.numchips; + denali->totalblks = mtd->size >> nand->phys_erase_shift; + denali->blksperchip = denali->totalblks / nand->numchips; /* override the default read operations */ - denali->nand.ecc.size = ECC_SECTOR_SIZE * denali->devnum; - denali->nand.ecc.read_page = denali_read_page; - denali->nand.ecc.read_page_raw = denali_read_page_raw; - denali->nand.ecc.write_page = denali_write_page; - denali->nand.ecc.write_page_raw = denali_write_page_raw; - denali->nand.ecc.read_oob = denali_read_oob; - denali->nand.ecc.write_oob = denali_write_oob; + nand->ecc.size = ECC_SECTOR_SIZE * denali->devnum; + nand->ecc.read_page = denali_read_page; + nand->ecc.read_page_raw = denali_read_page_raw; + nand->ecc.write_page = denali_write_page; + nand->ecc.write_page_raw = denali_write_page_raw; + nand->ecc.read_oob = denali_read_oob; + nand->ecc.write_oob = denali_write_oob; /* Occasionally the controller is in SPARE or MAIN+SPARE mode upon startup, and we want it to be MAIN only */ @@ -1534,12 +1539,12 @@ int denali_init(struct denali_nand_info *denali) MAIN_ACCESS); } - if (nand_scan_tail(&denali->mtd)) { + if (nand_scan_tail(mtd)) { ret = -ENXIO; goto failed_req_irq; } - return add_mtd_nand_device(&denali->mtd, "nand"); + return add_mtd_nand_device(mtd, "nand"); failed_req_irq: denali_irq_cleanup(denali->irq, denali); diff --git a/drivers/mtd/nand/nand_imx.c b/drivers/mtd/nand/nand_imx.c index e0d840b14e..1a065cb46f 100644 --- a/drivers/mtd/nand/nand_imx.c +++ b/drivers/mtd/nand/nand_imx.c @@ -32,7 +32,6 @@ #include <errno.h> struct imx_nand_host { - struct mtd_info mtd; struct nand_chip nand; struct mtd_partition *parts; struct device_d *dev; @@ -478,7 +477,7 @@ static void imx_nand_enable_hwecc_v3(struct nand_chip *chip, bool enable) static int imx_nand_correct_data_v1(struct mtd_info *mtd) { - struct nand_chip *nand_chip = mtd->priv; + struct nand_chip *nand_chip = mtd_to_nand(mtd); struct imx_nand_host *host = nand_chip->priv; if (host->eccstatus_v1 < 0) @@ -494,7 +493,7 @@ static int imx_nand_correct_data_v1(struct mtd_info *mtd) static int imx_nand_correct_data_v2_v3(struct mtd_info *mtd) { - struct nand_chip *nand_chip = mtd->priv; + struct nand_chip *nand_chip = mtd_to_nand(mtd); struct imx_nand_host *host = nand_chip->priv; u32 ecc_stat, err; int no_subpages; @@ -537,7 +536,7 @@ static int imx_nand_calculate_ecc(struct mtd_info *mtd, const u_char * dat, */ static u_char imx_nand_read_byte(struct mtd_info *mtd) { - struct nand_chip *nand_chip = mtd->priv; + struct nand_chip *nand_chip = mtd_to_nand(mtd); struct imx_nand_host *host = nand_chip->priv; u_char ret; @@ -568,7 +567,7 @@ static u_char imx_nand_read_byte(struct mtd_info *mtd) */ static u16 imx_nand_read_word(struct mtd_info *mtd) { - struct nand_chip *nand_chip = mtd->priv; + struct nand_chip *nand_chip = mtd_to_nand(mtd); struct imx_nand_host *host = nand_chip->priv; uint16_t ret; @@ -590,7 +589,7 @@ static u16 imx_nand_read_word(struct mtd_info *mtd) static void imx_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len) { - struct nand_chip *nand_chip = mtd->priv; + struct nand_chip *nand_chip = mtd_to_nand(mtd); struct imx_nand_host *host = nand_chip->priv; u16 col = host->buf_start; int n = mtd->oobsize + mtd->writesize - col; @@ -613,7 +612,7 @@ static void imx_nand_write_buf(struct mtd_info *mtd, */ static void imx_nand_read_buf(struct mtd_info *mtd, u_char * buf, int len) { - struct nand_chip *nand_chip = mtd->priv; + struct nand_chip *nand_chip = mtd_to_nand(mtd); struct imx_nand_host *host = nand_chip->priv; u16 col = host->buf_start; int n = mtd->oobsize + mtd->writesize - col; @@ -634,7 +633,7 @@ static void imx_nand_read_buf(struct mtd_info *mtd, u_char * buf, int len) */ static void copy_spare(struct mtd_info *mtd, int bfrom, void *buf) { - struct nand_chip *this = mtd->priv; + struct nand_chip *this = mtd_to_nand(mtd); struct imx_nand_host *host = this->priv; u16 i, j; u16 n = mtd->writesize >> 9; @@ -672,7 +671,7 @@ static void imx_nand_select_chip(struct mtd_info *mtd, int chip) static void mxc_do_addr_cycle(struct mtd_info *mtd, int column, int page_addr) { - struct nand_chip *nand_chip = mtd->priv; + struct nand_chip *nand_chip = mtd_to_nand(mtd); struct imx_nand_host *host = nand_chip->priv; /* @@ -738,7 +737,7 @@ static int get_eccsize(struct mtd_info *mtd) static void preset_v1(struct mtd_info *mtd) { - struct nand_chip *nand_chip = mtd->priv; + struct nand_chip *nand_chip = mtd_to_nand(mtd); struct imx_nand_host *host = nand_chip->priv; uint16_t config1 = 0; @@ -760,7 +759,7 @@ static void preset_v1(struct mtd_info *mtd) static void preset_v2(struct mtd_info *mtd) { - struct nand_chip *nand_chip = mtd->priv; + struct nand_chip *nand_chip = mtd_to_nand(mtd); struct imx_nand_host *host = nand_chip->priv; uint16_t config1 = 0; int mode; @@ -820,7 +819,7 @@ static void preset_v2(struct mtd_info *mtd) static void preset_v3(struct mtd_info *mtd) { - struct nand_chip *chip = mtd->priv; + struct nand_chip *chip = mtd_to_nand(mtd); struct imx_nand_host *host = chip->priv; uint32_t config2, config3; int i, addr_phases; @@ -962,7 +961,7 @@ static int imx_nand_read_page_raw(struct mtd_info *mtd, static void imx_nand_command(struct mtd_info *mtd, unsigned command, int column, int page_addr) { - struct nand_chip *nand_chip = mtd->priv; + struct nand_chip *nand_chip = mtd_to_nand(mtd); struct imx_nand_host *host = nand_chip->priv; dev_dbg(host->dev, @@ -1237,8 +1236,7 @@ static int __init imxnd_probe(struct device_d *dev) /* structures must be linked */ this = &host->nand; - mtd = &host->mtd; - mtd->priv = this; + mtd = &this->mtd; mtd->parent = dev; mtd->name = "imx_nand"; diff --git a/drivers/mtd/nand/nand_imx_bbm.c b/drivers/mtd/nand/nand_imx_bbm.c index 23722a9064..c005482b06 100644 --- a/drivers/mtd/nand/nand_imx_bbm.c +++ b/drivers/mtd/nand/nand_imx_bbm.c @@ -77,7 +77,7 @@ static int checkbad(struct mtd_info *mtd, loff_t ofs) static void *create_bbt(struct mtd_info *mtd) { - struct nand_chip *chip = mtd->priv; + struct nand_chip *chip = mtd_to_nand(mtd); int len, i, numblocks, ret; loff_t from = 0; uint8_t *bbt; @@ -122,7 +122,7 @@ out: static int attach_bbt(struct mtd_info *mtd, void *bbt) { - struct nand_chip *chip = mtd->priv; + struct nand_chip *chip = mtd_to_nand(mtd); chip->bbt_td->options |= NAND_BBT_WRITE | NAND_BBT_CREATE; chip->bbt_md->options |= NAND_BBT_WRITE | NAND_BBT_CREATE; diff --git a/drivers/mtd/nand/nand_mrvl_nfc.c b/drivers/mtd/nand/nand_mrvl_nfc.c index f48403da70..15d052b5a4 100644 --- a/drivers/mtd/nand/nand_mrvl_nfc.c +++ b/drivers/mtd/nand/nand_mrvl_nfc.c @@ -137,7 +137,6 @@ struct mrvl_nand_variant { }; struct mrvl_nand_host { - struct mtd_info mtd; struct nand_chip chip; struct mtd_partition *parts; struct device_d *dev; @@ -342,7 +341,7 @@ static struct mrvl_nand_timing timings[] = { static void mrvl_nand_set_timing(struct mrvl_nand_host *host, bool use_default) { - struct mtd_info *mtd = &host->mtd; + struct mtd_info *mtd = &host->chip.mtd; unsigned long nand_clk = clk_get_rate(host->core_clk); struct mrvl_nand_timing *t; uint32_t ndtr0, ndtr1; @@ -420,7 +419,7 @@ static unsigned int mrvl_datasize(struct mrvl_nand_host *host) { unsigned int datasize; - datasize = host->mtd.writesize; + datasize = host->chip.mtd.writesize; if (host->use_spare) { datasize += host->spare_size; if (!host->use_ecc) @@ -572,7 +571,7 @@ static void prepare_start_command(struct mrvl_nand_host *host, int command) if (command == NAND_CMD_READ0 || command == NAND_CMD_READOOB || command == NAND_CMD_SEQIN) { - host->buf_count = host->mtd.writesize + host->mtd.oobsize; + host->buf_count = host->chip.mtd.writesize + host->chip.mtd.oobsize; memset(host->data_buff, 0xFF, host->buf_count); } @@ -592,7 +591,7 @@ static int prepare_set_command(struct mrvl_nand_host *host, int command, int addr_cycle, exec_cmd; struct mtd_info *mtd; - mtd = &host->mtd; + mtd = &host->chip.mtd; exec_cmd = 1; if (host->cs != 0) @@ -878,7 +877,7 @@ static void mrvl_nand_write_buf(struct mtd_info *mtd, static void mrvl_nand_config_flash(struct mrvl_nand_host *host) { struct nand_chip *chip = &host->chip; - struct mtd_info *mtd = &host->mtd; + struct mtd_info *mtd = &host->chip.mtd; uint32_t ndcr = host->reg_ndcr; /* calculate flash information */ @@ -1036,7 +1035,7 @@ static int pxa_ecc_init(struct mrvl_nand_host *host, static int mrvl_nand_scan(struct mtd_info *mtd) { - struct nand_chip *chip = mtd->priv; + struct nand_chip *chip = mtd_to_nand(mtd); struct mrvl_nand_host *host = chip->priv; int ret; unsigned int ndcr; @@ -1115,8 +1114,7 @@ static struct mrvl_nand_host *alloc_nand_resource(struct device_d *dev) host = xzalloc(sizeof(*host)); host->num_cs = 1; host->cs = 0; - mtd = &host->mtd; - mtd->priv = &host->chip; + mtd = &host->chip.mtd; mtd->parent = dev; mtd->name = "mrvl_nand"; @@ -1216,14 +1214,14 @@ static int mrvl_nand_probe(struct device_d *dev) return ret; host->chip.controller = &host->chip.hwcontrol; - ret = mrvl_nand_scan(&host->mtd); + ret = mrvl_nand_scan(&host->chip.mtd); if (ret) { dev_warn(dev, "failed to scan nand at cs %d\n", host->cs); return -ENODEV; } - ret = add_mtd_nand_device(&host->mtd, "nand"); + ret = add_mtd_nand_device(&host->chip.mtd, "nand"); return ret; } diff --git a/drivers/mtd/nand/nand_mxs.c b/drivers/mtd/nand/nand_mxs.c index b016c5bff0..36b6e7ac22 100644 --- a/drivers/mtd/nand/nand_mxs.c +++ b/drivers/mtd/nand/nand_mxs.c @@ -200,7 +200,6 @@ struct mxs_nand_info { void __iomem *io_base; void __iomem *bch_base; struct clk *clk; - struct mtd_info mtd; enum gpmi_type type; int dma_channel_base; u32 version; @@ -284,7 +283,7 @@ static uint32_t mxs_nand_aux_status_offset(void) static uint32_t mxs_nand_get_mark_offset(struct mtd_info *mtd) { - struct nand_chip *chip = mtd->priv; + struct nand_chip *chip = mtd_to_nand(mtd); uint32_t chunk_data_size_in_bits; uint32_t chunk_ecc_size_in_bits; uint32_t chunk_total_size_in_bits; @@ -333,7 +332,7 @@ static uint32_t mxs_nand_get_mark_offset(struct mtd_info *mtd) static int mxs_nand_calc_geo(struct mtd_info *mtd) { - struct nand_chip *chip = mtd->priv; + struct nand_chip *chip = mtd_to_nand(mtd); struct mxs_nand_info *nand_info = chip->priv; int ecc_chunk_count = mxs_nand_ecc_chunk_cnt(mtd->writesize); int gf_len = 13; /* length of Galois Field for non-DDR nand */ @@ -380,7 +379,7 @@ int mxs_nand_get_geo(int *ecc_strength, int *bb_mark_bit_offset) if (!mxs_nand_mtd) return -ENODEV; - chip = mxs_nand_mtd->priv; + chip = mtd_to_nand(mxs_nand_mtd); nand_info = chip->priv; *ecc_strength = chip->ecc.strength; @@ -423,7 +422,7 @@ static int mxs_nand_wait_for_bch_complete(struct mxs_nand_info *nand_info) */ static void mxs_nand_cmd_ctrl(struct mtd_info *mtd, int data, unsigned int ctrl) { - struct nand_chip *chip = mtd->priv; + struct nand_chip *chip = mtd_to_nand(mtd); struct mxs_nand_info *nand_info = chip->priv; struct mxs_dma_desc *d; uint32_t channel = nand_info->dma_channel_base + nand_info->cur_chip; @@ -499,7 +498,7 @@ static void mxs_nand_cmd_ctrl(struct mtd_info *mtd, int data, unsigned int ctrl) */ static int mxs_nand_device_ready(struct mtd_info *mtd) { - struct nand_chip *chip = mtd->priv; + struct nand_chip *chip = mtd_to_nand(mtd); struct mxs_nand_info *nand_info = chip->priv; void __iomem *gpmi_regs = nand_info->io_base; uint32_t tmp; @@ -525,7 +524,7 @@ static int mxs_nand_device_ready(struct mtd_info *mtd) */ static void mxs_nand_select_chip(struct mtd_info *mtd, int chipnum) { - struct nand_chip *chip = mtd->priv; + struct nand_chip *chip = mtd_to_nand(mtd); struct mxs_nand_info *nand_info = chip->priv; nand_info->cur_chip = chipnum; @@ -541,7 +540,7 @@ static void mxs_nand_select_chip(struct mtd_info *mtd, int chipnum) static void mxs_nand_swap_block_mark(struct mtd_info *mtd, uint8_t *data_buf, uint8_t *oob_buf) { - struct nand_chip *chip = mtd->priv; + struct nand_chip *chip = mtd_to_nand(mtd); struct mxs_nand_info *nand_info = chip->priv; uint32_t bit_offset; @@ -582,7 +581,7 @@ static void mxs_nand_swap_block_mark(struct mtd_info *mtd, */ static void mxs_nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int length) { - struct nand_chip *chip = mtd->priv; + struct nand_chip *chip = mtd_to_nand(mtd); struct mxs_nand_info *nand_info = chip->priv; struct mxs_dma_desc *d; uint32_t channel = nand_info->dma_channel_base + nand_info->cur_chip; @@ -660,7 +659,7 @@ rtn: static void mxs_nand_write_buf(struct mtd_info *mtd, const uint8_t *buf, int length) { - struct nand_chip *chip = mtd->priv; + struct nand_chip *chip = mtd_to_nand(mtd); struct mxs_nand_info *nand_info = chip->priv; struct mxs_dma_desc *d; uint32_t channel = nand_info->dma_channel_base + nand_info->cur_chip; @@ -717,7 +716,7 @@ static uint8_t mxs_nand_read_byte(struct mtd_info *mtd) static void mxs_nand_config_bch(struct mtd_info *mtd, int readlen) { - struct nand_chip *chip = mtd->priv; + struct nand_chip *chip = mtd_to_nand(mtd); struct mxs_nand_info *nand_info = chip->priv; int chunk_size; void __iomem *bch_regs = nand_info->bch_base; @@ -1031,7 +1030,7 @@ rtn: static int mxs_nand_hook_read_oob(struct mtd_info *mtd, loff_t from, struct mtd_oob_ops *ops) { - struct nand_chip *chip = mtd->priv; + struct nand_chip *chip = mtd_to_nand(mtd); struct mxs_nand_info *nand_info = chip->priv; int ret; @@ -1056,7 +1055,7 @@ static int mxs_nand_hook_read_oob(struct mtd_info *mtd, loff_t from, static int mxs_nand_hook_write_oob(struct mtd_info *mtd, loff_t to, struct mtd_oob_ops *ops) { - struct nand_chip *chip = mtd->priv; + struct nand_chip *chip = mtd_to_nand(mtd); struct mxs_nand_info *nand_info = chip->priv; int ret; @@ -1080,7 +1079,7 @@ static int mxs_nand_hook_write_oob(struct mtd_info *mtd, loff_t to, */ static int mxs_nand_hook_block_markbad(struct mtd_info *mtd, loff_t ofs) { - struct nand_chip *chip = mtd->priv; + struct nand_chip *chip = mtd_to_nand(mtd); struct mxs_nand_info *nand_info = chip->priv; int ret; @@ -1242,7 +1241,7 @@ static int mxs_nand_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip) */ static int mxs_nand_scan_bbt(struct mtd_info *mtd) { - struct nand_chip *chip = mtd->priv; + struct nand_chip *chip = mtd_to_nand(mtd); struct mxs_nand_info *nand_info = chip->priv; void __iomem *bch_regs = nand_info->bch_base; int ret; @@ -2030,7 +2029,7 @@ static void mxs_nand_compute_edo_timing(struct mxs_nand_info *info, static int mxs_nand_enable_edo_mode(struct mxs_nand_info *info) { struct nand_chip *chip = &info->nand_chip; - struct mtd_info *mtd = &info->mtd; + struct mtd_info *mtd = &chip->mtd; uint8_t feature[ONFI_SUBFEATURE_PARAM_LEN] = {}; int ret, mode; @@ -2196,8 +2195,7 @@ static int mxs_nand_probe(struct device_d *dev) /* structures must be linked */ chip = &nand_info->nand_chip; - mtd = &nand_info->mtd; - mtd->priv = chip; + mtd = &nand_info->nand_chip.mtd; mtd->parent = dev; chip->priv = nand_info; diff --git a/drivers/mtd/nand/nand_omap_gpmc.c b/drivers/mtd/nand/nand_omap_gpmc.c index 2dcf7e723b..c4d0cdfb57 100644 --- a/drivers/mtd/nand/nand_omap_gpmc.c +++ b/drivers/mtd/nand/nand_omap_gpmc.c @@ -70,6 +70,7 @@ #include <io.h> #include <mach/gpmc.h> #include <mach/gpmc_nand.h> +#include <platform_data/elm.h> #include "nand_omap_bch_decoder.h" @@ -91,6 +92,10 @@ static const uint8_t bch8_vector[] = {0xf3, 0xdb, 0x14, 0x16, 0x8b, 0xd2, 0xbe, 0xcc, 0xac, 0x6b, 0xff, 0x99, 0x7b}; +static u_char bch16_vector[] = {0xf5, 0x24, 0x1c, 0xd0, 0x61, 0xb3, 0xf1, 0x55, + 0x2e, 0x2c, 0x86, 0xa3, 0xed, 0x36, 0x1b, 0x78, + 0x48, 0x76, 0xa9, 0x3b, 0x97, 0xd1, 0x7a, 0x93, + 0x07, 0x0e}; static const char *ecc_mode_strings[] = { "software", @@ -139,7 +144,7 @@ static struct nand_bbt_descr bb_descrip_flashbased = { */ static int omap_dev_ready(struct mtd_info *mtd) { - struct nand_chip *nand = (struct nand_chip *)(mtd->priv); + struct nand_chip *nand = mtd_to_nand(mtd); struct gpmc_nand_info *oinfo = (struct gpmc_nand_info *)(nand->priv); if (readl(oinfo->gpmc_base + GPMC_STATUS) & oinfo->wait_mon_mask) @@ -185,7 +190,7 @@ static void gpmc_nand_wp(struct gpmc_nand_info *oinfo, int mode) */ static void omap_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl) { - struct nand_chip *nand = (struct nand_chip *)(mtd->priv); + struct nand_chip *nand = mtd_to_nand(mtd); struct gpmc_nand_info *oinfo = (struct gpmc_nand_info *)(nand->priv); switch (ctrl) { @@ -230,9 +235,9 @@ static unsigned int gen_true_ecc(u8 *ecc_buf) static int __omap_calculate_ecc(struct mtd_info *mtd, uint8_t *ecc_code, int sblock) { - struct nand_chip *nand = (struct nand_chip *)(mtd->priv); + struct nand_chip *nand = mtd_to_nand(mtd); struct gpmc_nand_info *oinfo = (struct gpmc_nand_info *)(nand->priv); - unsigned int reg; + unsigned int reg, reg1, val; unsigned int val1 = 0x0, val2 = 0x0; unsigned int val3 = 0x0, val4 = 0x0; int ecc_size = 8; @@ -274,6 +279,45 @@ static int __omap_calculate_ecc(struct mtd_info *mtd, uint8_t *ecc_code, /* P2048o, P1024o, P512o, P256o, P2048e, P1024e, P512e, P256e */ *ecc_code++ = ((val1 >> 8) & 0x0f) | ((val1 >> 20) & 0xf0); break; + + case OMAP_ECC_BCH16_CODE_HW: + reg = GPMC_ECC_BCH_RESULT_0 + (0x10 * sblock); + reg1 = 0x300 + (0x10 * sblock); + + val = readl(oinfo->gpmc_base + reg1 + 0x8); + ecc_code[0] = ((val >> 8) & 0xFF); + ecc_code[1] = ((val >> 0) & 0xFF); + val = readl(oinfo->gpmc_base + reg1 + 0x4); + ecc_code[2] = ((val >> 24) & 0xFF); + ecc_code[3] = ((val >> 16) & 0xFF); + ecc_code[4] = ((val >> 8) & 0xFF); + ecc_code[5] = ((val >> 0) & 0xFF); + val = readl(oinfo->gpmc_base + reg1 + 0x0); + ecc_code[6] = ((val >> 24) & 0xFF); + ecc_code[7] = ((val >> 16) & 0xFF); + ecc_code[8] = ((val >> 8) & 0xFF); + ecc_code[9] = ((val >> 0) & 0xFF); + val = readl(oinfo->gpmc_base + reg + 0xc); + ecc_code[10] = ((val >> 24) & 0xFF); + ecc_code[11] = ((val >> 16) & 0xFF); + ecc_code[12] = ((val >> 8) & 0xFF); + ecc_code[13] = ((val >> 0) & 0xFF); + val = readl(oinfo->gpmc_base + reg + 0x8); + ecc_code[14] = ((val >> 24) & 0xFF); + ecc_code[15] = ((val >> 16) & 0xFF); + ecc_code[16] = ((val >> 8) & 0xFF); + ecc_code[17] = ((val >> 0) & 0xFF); + val = readl(oinfo->gpmc_base + reg + 0x4); + ecc_code[18] = ((val >> 24) & 0xFF); + ecc_code[19] = ((val >> 16) & 0xFF); + ecc_code[20] = ((val >> 8) & 0xFF); + ecc_code[21] = ((val >> 0) & 0xFF); + val = readl(oinfo->gpmc_base + reg + 0x0); + ecc_code[22] = ((val >> 24) & 0xFF); + ecc_code[23] = ((val >> 16) & 0xFF); + ecc_code[24] = ((val >> 8) & 0xFF); + ecc_code[25] = ((val >> 0) & 0xFF); + break; default: return -EINVAL; } @@ -290,11 +334,11 @@ static int omap_calculate_ecc(struct mtd_info *mtd, const uint8_t *dat, static int omap_correct_bch(struct mtd_info *mtd, uint8_t *dat, uint8_t *read_ecc, uint8_t *calc_ecc) { - struct nand_chip *nand = (struct nand_chip *)(mtd->priv); + struct nand_chip *nand = mtd_to_nand(mtd); struct gpmc_nand_info *oinfo = (struct gpmc_nand_info *)(nand->priv); int j, actual_eccsize; const uint8_t *erased_ecc_vec; - unsigned int err_loc[8]; + unsigned int err_loc[16]; int bch_max_err; int bitflip_count = 0; bool eccflag = 0; @@ -311,6 +355,11 @@ static int omap_correct_bch(struct mtd_info *mtd, uint8_t *dat, erased_ecc_vec = bch8_vector; bch_max_err = BCH8_MAX_ERROR; break; + case OMAP_ECC_BCH16_CODE_HW: + actual_eccsize = eccsize; + erased_ecc_vec = bch16_vector; + bch_max_err = 16; + break; default: dev_err(oinfo->pdev, "invalid driver configuration\n"); return -EINVAL; @@ -362,7 +411,7 @@ static int omap_correct_hamming(struct mtd_info *mtd, uint8_t *dat, unsigned int orig_ecc, new_ecc, res, hm; unsigned short parity_bits, byte; unsigned char bit; - struct nand_chip *nand = (struct nand_chip *)(mtd->priv); + struct nand_chip *nand = mtd_to_nand(mtd); struct gpmc_nand_info *oinfo = (struct gpmc_nand_info *)(nand->priv); if (read_ecc[0] == 0xff && read_ecc[1] == 0xff && @@ -416,7 +465,7 @@ static int omap_correct_hamming(struct mtd_info *mtd, uint8_t *dat, static int omap_correct_data(struct mtd_info *mtd, uint8_t *dat, uint8_t *read_ecc, uint8_t *calc_ecc) { - struct nand_chip *nand = (struct nand_chip *)(mtd->priv); + struct nand_chip *nand = mtd_to_nand(mtd); struct gpmc_nand_info *oinfo = (struct gpmc_nand_info *)(nand->priv); if (oinfo->ecc_mode != OMAP_ECC_HAMMING_CODE_HW_ROMCODE) @@ -429,7 +478,7 @@ static int omap_correct_data(struct mtd_info *mtd, uint8_t *dat, static void omap_enable_hwecc(struct mtd_info *mtd, int mode) { - struct nand_chip *nand = (struct nand_chip *)(mtd->priv); + struct nand_chip *nand = mtd_to_nand(mtd); struct gpmc_nand_info *oinfo = (struct gpmc_nand_info *)(nand->priv); unsigned int bch_mod = 0, bch_wrapmode = 0, eccsize1 = 0, eccsize0 = 0; unsigned int ecc_conf_val = 0, ecc_size_conf_val = 0; @@ -441,13 +490,27 @@ static void omap_enable_hwecc(struct mtd_info *mtd, int mode) case OMAP_ECC_BCH8_CODE_HW: case OMAP_ECC_BCH8_CODE_HW_ROMCODE: if (mode == NAND_ECC_READ) { - eccsize1 = 0x1A; eccsize0 = 0x18; + eccsize0 = 24; + eccsize1 = 26; bch_mod = 1; - bch_wrapmode = 0x04; + bch_wrapmode = 4; } else { - eccsize1 = 0x20; eccsize0 = 0x00; + eccsize0 = 0; + eccsize1 = 32; bch_mod = 1; - bch_wrapmode = 0x06; + bch_wrapmode = 6; + } + break; + case OMAP_ECC_BCH16_CODE_HW: + bch_mod = 2; + if (mode == NAND_ECC_READ) { + bch_wrapmode = 4; + eccsize0 = 4; /* ECC bits in nibbles per sector */ + eccsize1 = 52; /* non-ECC bits in nibbles per sector */ + } else { + bch_wrapmode = 4; + eccsize0 = 4; /* extra bits in nibbles per sector */ + eccsize1 = 52; /* OOB bits in nibbles per sector */ } break; case OMAP_ECC_HAMMING_CODE_HW_ROMCODE: @@ -483,7 +546,7 @@ static void omap_enable_hwecc(struct mtd_info *mtd, int mode) GPMC_ECC_CONFIG_ECCBCHTSEL(bch_mod) | GPMC_ECC_CONFIG_ECCWRAPMODE(bch_wrapmode) | dev_width | - GPMC_ECC_CONFIG_ECCTOPSECTOR(3) | + GPMC_ECC_CONFIG_ECCTOPSECTOR(nand->ecc.steps - 1) | GPMC_ECC_CONFIG_ECCCS(cs) | GPMC_ECC_CONFIG_ECCENABLE); } @@ -689,6 +752,234 @@ static int omap_gpmc_read_page_bch_rom_mode(struct mtd_info *mtd, return max_bitflips; } +/** + * erased_sector_bitflips - count bit flips + * @data: data sector buffer + * @oob: oob buffer + * oinfo: gpmc_nand_info + * + * Check the bit flips in erased page falls below correctable level. + * If falls below, report the page as erased with correctable bit + * flip, else report as uncorrectable page. + */ +static int erased_sector_bitflips(u_char *data, u_char *oob, + struct gpmc_nand_info *oinfo) +{ + int flip_bits = 0, i; + + for (i = 0; i < oinfo->nand.ecc.size; i++) { + flip_bits += hweight8(~data[i]); + if (flip_bits > oinfo->nand.ecc.strength) + return 0; + } + + for (i = 0; i < oinfo->nand.ecc.bytes - 1; i++) { + flip_bits += hweight8(~oob[i]); + if (flip_bits > oinfo->nand.ecc.strength) + return 0; + } + + /* + * Bit flips falls in correctable level. + * Fill data area with 0xFF + */ + if (flip_bits) { + memset(data, 0xFF, oinfo->nand.ecc.size); + memset(oob, 0xFF, oinfo->nand.ecc.bytes); + } + + return flip_bits; +} + +/** + * omap_elm_correct_data - corrects page data area in case error reported + * @chip: NAND chip object + * @data: page data + * @read_ecc: ecc read from nand flash + * @calc_ecc: ecc read from HW ECC registers + * + * Calculated ecc vector reported as zero in case of non-error pages. + * In case of non-zero ecc vector, first filter out erased-pages, and + * then process data via ELM to detect bit-flips. + */ +static int omap_elm_correct_data(struct nand_chip *chip, u_char *data, + u_char *read_ecc, u_char *calc_ecc) +{ + struct gpmc_nand_info *oinfo = chip->priv; + struct nand_ecc_ctrl *ecc = &oinfo->nand.ecc; + int eccsteps = oinfo->nand.ecc.steps; + int i , j, stat = 0; + int eccflag, actual_eccbytes; + struct elm_errorvec err_vec[ERROR_VECTOR_MAX]; + u_char *ecc_vec = calc_ecc; + u_char *spare_ecc = read_ecc; + const u_char *erased_ecc_vec; + u_char *buf; + int bitflip_count; + bool is_error_reported = false; + u32 bit_pos, byte_pos, error_max, pos; + int err; + + switch (oinfo->ecc_mode) { + case OMAP_ECC_BCH8_CODE_HW: + /* omit 14th ECC byte reserved for ROM code compatibility */ + actual_eccbytes = ecc->bytes - 1; + erased_ecc_vec = bch8_vector; + break; + case OMAP_ECC_BCH16_CODE_HW: + actual_eccbytes = ecc->bytes; + erased_ecc_vec = bch16_vector; + break; + default: + dev_err(oinfo->pdev, "invalid driver configuration\n"); + return -EINVAL; + } + + /* Initialize elm error vector to zero */ + memset(err_vec, 0, sizeof(err_vec)); + + for (i = 0; i < eccsteps ; i++) { + eccflag = 0; /* initialize eccflag */ + + /* + * Check any error reported, + * In case of error, non zero ecc reported. + */ + for (j = 0; j < actual_eccbytes; j++) { + if (calc_ecc[j] != 0) { + eccflag = 1; /* non zero ecc, error present */ + break; + } + } + + if (eccflag == 1) { + if (memcmp(calc_ecc, erased_ecc_vec, + actual_eccbytes) == 0) { + /* + * calc_ecc[] matches pattern for ECC(all 0xff) + * so this is definitely an erased-page + */ + } else { + buf = &data[oinfo->nand.ecc.size * i]; + /* + * count number of 0-bits in read_buf. + * This check can be removed once a similar + * check is introduced in generic NAND driver + */ + bitflip_count = erased_sector_bitflips( + buf, read_ecc, oinfo); + if (bitflip_count) { + /* + * number of 0-bits within ECC limits + * So this may be an erased-page + */ + stat += bitflip_count; + } else { + /* + * Too many 0-bits. It may be a + * - programmed-page, OR + * - erased-page with many bit-flips + * So this page requires check by ELM + */ + err_vec[i].error_reported = true; + is_error_reported = true; + } + } + } + + /* Update the ecc vector */ + calc_ecc += ecc->bytes; + read_ecc += ecc->bytes; + } + + /* Check if any error reported */ + if (!is_error_reported) + return stat; + + /* Decode BCH error using ELM module */ + elm_decode_bch_error_page(ecc_vec, err_vec); + + err = 0; + for (i = 0; i < eccsteps; i++) { + if (err_vec[i].error_uncorrectable) { + dev_err(oinfo->pdev, + "uncorrectable bit-flips found\n"); + err = -EBADMSG; + } else if (err_vec[i].error_reported) { + for (j = 0; j < err_vec[i].error_count; j++) { + switch (oinfo->ecc_mode) { + case OMAP_ECC_BCH8_CODE_HW: + case OMAP_ECC_BCH16_CODE_HW: + pos = err_vec[i].error_loc[j]; + break; + default: + return -EINVAL; + } + error_max = (ecc->size + actual_eccbytes) * 8; + /* Calculate bit position of error */ + bit_pos = pos % 8; + + /* Calculate byte position of error */ + byte_pos = (error_max - pos - 1) / 8; + + if (pos < error_max) { + if (byte_pos < 512) { + pr_debug("bitflip@dat[%d]=%x\n", + byte_pos, data[byte_pos]); + data[byte_pos] ^= 1 << bit_pos; + } else { + pr_debug("bitflip@oob[%d]=%x\n", + (byte_pos - 512), + spare_ecc[byte_pos - 512]); + spare_ecc[byte_pos - 512] ^= + 1 << bit_pos; + } + } else { + dev_err(oinfo->pdev, + "invalid bit-flip @ %d:%d\n", + byte_pos, bit_pos); + err = -EBADMSG; + } + } + } + + /* Update number of correctable errors */ + stat = max_t(unsigned int, stat, err_vec[i].error_count); + + /* Update page data with sector size */ + data += ecc->size; + spare_ecc += ecc->bytes; + } + + return (err) ? err : stat; +} + +static int gpmc_read_page_hwecc_elm(struct mtd_info *mtd, + struct nand_chip *chip, uint8_t *buf, + int oob_required, int page) +{ + int i; + int eccbytes = chip->ecc.bytes; + int eccsteps = chip->ecc.steps; + uint8_t *ecc_calc = chip->buffers->ecccalc; + uint8_t *ecc_code = chip->buffers->ecccode; + uint32_t *eccpos = chip->ecc.layout->eccpos; + + chip->ecc.hwctl(mtd, NAND_ECC_READ); + chip->read_buf(mtd, buf, mtd->writesize); + chip->read_buf(mtd, chip->oob_poi, mtd->oobsize); + + for (i = 0; i < chip->ecc.total; i++) + ecc_code[i] = chip->oob_poi[eccpos[i]]; + + eccsteps = chip->ecc.steps; + + for (i = 0; eccsteps; eccsteps--, i++) + __omap_calculate_ecc(mtd, &ecc_calc[i * eccbytes], i); + + return omap_elm_correct_data(chip, buf, ecc_code, ecc_calc); +} + static int gpmc_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip, uint8_t *buf, int oob_required, int page) @@ -732,7 +1023,7 @@ static int omap_gpmc_eccmode(struct gpmc_nand_info *oinfo, { struct mtd_info *minfo = &oinfo->minfo; struct nand_chip *nand = &oinfo->nand; - int offset; + int offset, err; int i, j; if (nand->options & NAND_BUSWIDTH_16) @@ -807,6 +1098,32 @@ static int omap_gpmc_eccmode(struct gpmc_nand_info *oinfo, for (i = 2; i < 58; i++) omap_oobinfo.eccpos[j++] = i; break; + case OMAP_ECC_BCH16_CODE_HW: + oinfo->nand.ecc.size = 512; + oinfo->nand.ecc.bytes = 26; + oinfo->nand.ecc.strength = 16; + oinfo->nand.ecc.steps = + minfo->writesize / oinfo->nand.ecc.size; + oinfo->nand.ecc.total = + oinfo->nand.ecc.steps * oinfo->nand.ecc.bytes; + omap_oobinfo.eccbytes = oinfo->nand.ecc.total; + + for (i = 0; i < oinfo->nand.ecc.total; i++) + omap_oobinfo.eccpos[i] = i + 2; + + /* reserved marker already included in ecclayout->eccbytes */ + omap_oobinfo.oobfree->offset = + omap_oobinfo.eccpos[oinfo->nand.ecc.total - 1] + 1; + + err = elm_config(BCH16_ECC, + oinfo->minfo.writesize / nand->ecc.size, + nand->ecc.size, nand->ecc.bytes); + if (err < 0) + return err; + + nand->ecc.read_page = gpmc_read_page_hwecc_elm; + + break; case OMAP_ECC_SOFT: nand->ecc.layout = NULL; nand->ecc.mode = NAND_ECC_SOFT; @@ -883,7 +1200,6 @@ static int gpmc_nand_probe(struct device_d *pdev) nand->priv = (void *)oinfo; minfo = &oinfo->minfo; - minfo->priv = (void *)nand; minfo->parent = pdev; if (pdata->cs >= GPMC_NUM_CS) { diff --git a/drivers/mtd/nand/nand_orion.c b/drivers/mtd/nand/nand_orion.c index 881ffeec05..c8b89cd03c 100644 --- a/drivers/mtd/nand/nand_orion.c +++ b/drivers/mtd/nand/nand_orion.c @@ -21,7 +21,6 @@ #include <linux/clk.h> struct orion_nand { - struct mtd_info mtd; struct nand_chip chip; u8 ale; /* address line number connected to ALE */ @@ -30,7 +29,7 @@ struct orion_nand { static void orion_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl) { - struct nand_chip *chip = mtd->priv; + struct nand_chip *chip = mtd_to_nand(mtd); struct orion_nand *priv = chip->priv; u32 offs; @@ -52,7 +51,7 @@ static void orion_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl static void orion_nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len) { - struct nand_chip *chip = mtd->priv; + struct nand_chip *chip = mtd_to_nand(mtd); void __iomem *io_base = chip->IO_ADDR_R; uint64_t *buf64; int i = 0; @@ -91,7 +90,7 @@ static int orion_nand_probe(struct device_d *dev) u32 val = 0; priv = xzalloc(sizeof(struct orion_nand)); - mtd = &priv->mtd; + mtd = &priv->chip.mtd; chip = &priv->chip; iores = dev_request_mem_resource(dev, 0); @@ -118,7 +117,6 @@ static int orion_nand_probe(struct device_d *dev) chip->chip_delay = (u8)val; mtd->parent = dev; - mtd->priv = chip; chip->priv = priv; chip->IO_ADDR_R = chip->IO_ADDR_W = io_base; chip->cmd_ctrl = orion_nand_cmd_ctrl; diff --git a/drivers/mtd/nand/nand_s3c24xx.c b/drivers/mtd/nand/nand_s3c24xx.c index df22735488..9fbc0f90d3 100644 --- a/drivers/mtd/nand/nand_s3c24xx.c +++ b/drivers/mtd/nand/nand_s3c24xx.c @@ -88,7 +88,6 @@ struct s3c24x0_nand_host { - struct mtd_info mtd; struct nand_chip nand; struct mtd_partition *parts; struct device_d *dev; @@ -203,7 +202,7 @@ static void __nand_boot_init disable_nand_controller(void __iomem *host) */ static void s3c2440_nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len) { - struct nand_chip *nand_chip = mtd->priv; + struct nand_chip *nand_chip = mtd_to_nand(mtd); struct s3c24x0_nand_host *host = nand_chip->priv; readsl(host->base + NFDATA, buf, len >> 2); @@ -228,7 +227,7 @@ static void s3c2440_nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len) static void s3c2440_nand_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len) { - struct nand_chip *nand_chip = mtd->priv; + struct nand_chip *nand_chip = mtd_to_nand(mtd); struct s3c24x0_nand_host *host = nand_chip->priv; writesl(host->base + NFDATA, buf, len >> 2); @@ -316,7 +315,7 @@ static int s3c2410_nand_correct_data(struct mtd_info *mtd, uint8_t *dat, static void s3c2410_nand_enable_hwecc(struct mtd_info *mtd, int mode) { - struct nand_chip *nand_chip = mtd->priv; + struct nand_chip *nand_chip = mtd_to_nand(mtd); struct s3c24x0_nand_host *host = nand_chip->priv; #ifdef CONFIG_CPU_S3C2410 @@ -329,7 +328,7 @@ static void s3c2410_nand_enable_hwecc(struct mtd_info *mtd, int mode) static int s3c2410_nand_calculate_ecc(struct mtd_info *mtd, const uint8_t *dat, uint8_t *ecc_code) { - struct nand_chip *nand_chip = mtd->priv; + struct nand_chip *nand_chip = mtd_to_nand(mtd); struct s3c24x0_nand_host *host = nand_chip->priv; #ifdef CONFIG_CPU_S3C2410 @@ -349,7 +348,7 @@ static int s3c2410_nand_calculate_ecc(struct mtd_info *mtd, const uint8_t *dat, static void s3c24x0_nand_select_chip(struct mtd_info *mtd, int chip) { - struct nand_chip *nand_chip = mtd->priv; + struct nand_chip *nand_chip = mtd_to_nand(mtd); struct s3c24x0_nand_host *host = nand_chip->priv; if (chip == -1) @@ -360,7 +359,7 @@ static void s3c24x0_nand_select_chip(struct mtd_info *mtd, int chip) static int s3c24x0_nand_devready(struct mtd_info *mtd) { - struct nand_chip *nand_chip = mtd->priv; + struct nand_chip *nand_chip = mtd_to_nand(mtd); struct s3c24x0_nand_host *host = nand_chip->priv; return readw(host->base + NFSTAT) & NFSTAT_BUSY; @@ -369,7 +368,7 @@ static int s3c24x0_nand_devready(struct mtd_info *mtd) static void s3c24x0_nand_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl) { - struct nand_chip *nand_chip = mtd->priv; + struct nand_chip *nand_chip = mtd_to_nand(mtd); struct s3c24x0_nand_host *host = nand_chip->priv; if (cmd == NAND_CMD_NONE) @@ -428,8 +427,7 @@ static int s3c24x0_nand_probe(struct device_d *dev) /* structures must be linked */ chip = &host->nand; - mtd = &host->mtd; - mtd->priv = chip; + mtd = &chip->mtd; mtd->parent = dev; /* init the default settings */ diff --git a/drivers/mtd/nand/nomadik_nand.c b/drivers/mtd/nand/nomadik_nand.c index 8f37345bce..31bc2efc40 100644 --- a/drivers/mtd/nand/nomadik_nand.c +++ b/drivers/mtd/nand/nomadik_nand.c @@ -38,7 +38,6 @@ #include <errno.h> struct nomadik_nand_host { - struct mtd_info mtd; struct nand_chip nand; void __iomem *cmd_va; void __iomem *addr_va; @@ -105,7 +104,7 @@ static int nomadik_ecc512_calc(struct mtd_info *mtd, const u_char *data, static int nomadik_ecc512_correct(struct mtd_info *mtd, uint8_t *dat, uint8_t *r_ecc, uint8_t *c_ecc) { - struct nand_chip *chip = mtd->priv; + struct nand_chip *chip = mtd_to_nand(mtd); uint32_t r, c, d, diff; /*read, calculated, xor of them */ if (!memcmp(r_ecc, c_ecc, chip->ecc.bytes)) @@ -157,7 +156,7 @@ static void nomadik_ecc_control(struct mtd_info *mtd, int mode) static void nomadik_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl) { - struct nand_chip *nand = mtd->priv; + struct nand_chip *nand = mtd_to_nand(mtd); struct nomadik_nand_host *host = nand->priv; if (cmd == NAND_CMD_NONE) @@ -198,9 +197,8 @@ static int nomadik_nand_probe(struct device_d *dev) return PTR_ERR(host->addr_va); /* Link all private pointers */ - mtd = &host->mtd; nand = &host->nand; - mtd->priv = nand; + mtd = &nand->mtd; nand->priv = host; mtd->parent = dev; @@ -223,7 +221,7 @@ static int nomadik_nand_probe(struct device_d *dev) /* * Scan to find existance of the device */ - if (nand_scan(&host->mtd, 1)) { + if (nand_scan(mtd, 1)) { ret = -ENXIO; goto err; } diff --git a/drivers/mtd/nand/omap_elm.c b/drivers/mtd/nand/omap_elm.c new file mode 100644 index 0000000000..583235fc78 --- /dev/null +++ b/drivers/mtd/nand/omap_elm.c @@ -0,0 +1,413 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Error Location Module + * + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + */ + +#define DRIVER_NAME "omap-elm" + +#include <common.h> +#include <driver.h> +#include <init.h> +#include <platform_data/elm.h> + +#define ELM_SYSCONFIG 0x010 +#define ELM_IRQSTATUS 0x018 +#define ELM_IRQENABLE 0x01c +#define ELM_LOCATION_CONFIG 0x020 +#define ELM_PAGE_CTRL 0x080 +#define ELM_SYNDROME_FRAGMENT_0 0x400 +#define ELM_SYNDROME_FRAGMENT_1 0x404 +#define ELM_SYNDROME_FRAGMENT_2 0x408 +#define ELM_SYNDROME_FRAGMENT_3 0x40c +#define ELM_SYNDROME_FRAGMENT_4 0x410 +#define ELM_SYNDROME_FRAGMENT_5 0x414 +#define ELM_SYNDROME_FRAGMENT_6 0x418 +#define ELM_LOCATION_STATUS 0x800 +#define ELM_ERROR_LOCATION_0 0x880 + +/* ELM Interrupt Status Register */ +#define INTR_STATUS_PAGE_VALID BIT(8) + +/* ELM Interrupt Enable Register */ +#define INTR_EN_PAGE_MASK BIT(8) + +/* ELM Location Configuration Register */ +#define ECC_BCH_LEVEL_MASK 0x3 + +/* ELM syndrome */ +#define ELM_SYNDROME_VALID BIT(16) + +/* ELM_LOCATION_STATUS Register */ +#define ECC_CORRECTABLE_MASK BIT(8) +#define ECC_NB_ERRORS_MASK 0x1f + +/* ELM_ERROR_LOCATION_0-15 Registers */ +#define ECC_ERROR_LOCATION_MASK 0x1fff + +#define ELM_ECC_SIZE 0x7ff + +#define SYNDROME_FRAGMENT_REG_SIZE 0x40 +#define ERROR_LOCATION_SIZE 0x100 + +struct elm_registers { + u32 elm_irqenable; + u32 elm_sysconfig; + u32 elm_location_config; + u32 elm_page_ctrl; + u32 elm_syndrome_fragment_6[ERROR_VECTOR_MAX]; + u32 elm_syndrome_fragment_5[ERROR_VECTOR_MAX]; + u32 elm_syndrome_fragment_4[ERROR_VECTOR_MAX]; + u32 elm_syndrome_fragment_3[ERROR_VECTOR_MAX]; + u32 elm_syndrome_fragment_2[ERROR_VECTOR_MAX]; + u32 elm_syndrome_fragment_1[ERROR_VECTOR_MAX]; + u32 elm_syndrome_fragment_0[ERROR_VECTOR_MAX]; +}; + +struct elm_info { + struct device_d *dev; + void __iomem *elm_base; + struct list_head list; + enum bch_ecc bch_type; + struct elm_registers elm_regs; + int ecc_steps; + int ecc_syndrome_size; +}; + +static struct elm_info *ginfo; + +static void elm_write_reg(struct elm_info *info, int offset, u32 val) +{ + writel(val, info->elm_base + offset); +} + +static u32 elm_read_reg(struct elm_info *info, int offset) +{ + return readl(info->elm_base + offset); +} + +/** + * elm_config - Configure ELM module + * @dev: ELM device + * @bch_type: Type of BCH ecc + */ +int elm_config(enum bch_ecc bch_type, int ecc_steps, int ecc_step_size, + int ecc_syndrome_size) +{ + struct elm_info *info = ginfo; + u32 reg_val; + + if (!info) + return -ENODEV; + /* ELM cannot detect ECC errors for chunks > 1KB */ + if (ecc_step_size > ((ELM_ECC_SIZE + 1) / 2)) { + dev_err(info->dev, "unsupported config ecc-size=%d\n", ecc_step_size); + return -EINVAL; + } + /* ELM support 8 error syndrome process */ + if (ecc_steps > ERROR_VECTOR_MAX) { + dev_err(info->dev, "unsupported config ecc-step=%d\n", ecc_steps); + return -EINVAL; + } + + reg_val = (bch_type & ECC_BCH_LEVEL_MASK) | (ELM_ECC_SIZE << 16); + elm_write_reg(info, ELM_LOCATION_CONFIG, reg_val); + info->bch_type = bch_type; + info->ecc_steps = ecc_steps; + info->ecc_syndrome_size = ecc_syndrome_size; + + return 0; +} + +/** + * elm_configure_page_mode - Enable/Disable page mode + * @info: elm info + * @index: index number of syndrome fragment vector + * @enable: enable/disable flag for page mode + * + * Enable page mode for syndrome fragment index + */ +static void elm_configure_page_mode(struct elm_info *info, int index, + bool enable) +{ + u32 reg_val; + + reg_val = elm_read_reg(info, ELM_PAGE_CTRL); + if (enable) + reg_val |= BIT(index); /* enable page mode */ + else + reg_val &= ~BIT(index); /* disable page mode */ + + elm_write_reg(info, ELM_PAGE_CTRL, reg_val); +} + +/** + * elm_load_syndrome - Load ELM syndrome reg + * @info: elm info + * @err_vec: elm error vectors + * @ecc: buffer with calculated ecc + * + * Load syndrome fragment registers with calculated ecc in reverse order. + */ +static void elm_load_syndrome(struct elm_info *info, + struct elm_errorvec *err_vec, u8 *ecc) +{ + int i, offset; + u32 val; + + for (i = 0; i < info->ecc_steps; i++) { + + /* Check error reported */ + if (err_vec[i].error_reported) { + elm_configure_page_mode(info, i, true); + offset = ELM_SYNDROME_FRAGMENT_0 + + SYNDROME_FRAGMENT_REG_SIZE * i; + switch (info->bch_type) { + case BCH8_ECC: + /* syndrome fragment 0 = ecc[9-12B] */ + val = cpu_to_be32(*(u32 *) &ecc[9]); + elm_write_reg(info, offset, val); + + /* syndrome fragment 1 = ecc[5-8B] */ + offset += 4; + val = cpu_to_be32(*(u32 *) &ecc[5]); + elm_write_reg(info, offset, val); + + /* syndrome fragment 2 = ecc[1-4B] */ + offset += 4; + val = cpu_to_be32(*(u32 *) &ecc[1]); + elm_write_reg(info, offset, val); + + /* syndrome fragment 3 = ecc[0B] */ + offset += 4; + val = ecc[0]; + elm_write_reg(info, offset, val); + break; + case BCH4_ECC: + /* syndrome fragment 0 = ecc[20-52b] bits */ + val = (cpu_to_be32(*(u32 *) &ecc[3]) >> 4) | + ((ecc[2] & 0xf) << 28); + elm_write_reg(info, offset, val); + + /* syndrome fragment 1 = ecc[0-20b] bits */ + offset += 4; + val = cpu_to_be32(*(u32 *) &ecc[0]) >> 12; + elm_write_reg(info, offset, val); + break; + case BCH16_ECC: + val = cpu_to_be32(*(u32 *) &ecc[22]); + elm_write_reg(info, offset, val); + offset += 4; + val = cpu_to_be32(*(u32 *) &ecc[18]); + elm_write_reg(info, offset, val); + offset += 4; + val = cpu_to_be32(*(u32 *) &ecc[14]); + elm_write_reg(info, offset, val); + offset += 4; + val = cpu_to_be32(*(u32 *) &ecc[10]); + elm_write_reg(info, offset, val); + offset += 4; + val = cpu_to_be32(*(u32 *) &ecc[6]); + elm_write_reg(info, offset, val); + offset += 4; + val = cpu_to_be32(*(u32 *) &ecc[2]); + elm_write_reg(info, offset, val); + offset += 4; + val = cpu_to_be32(*(u32 *) &ecc[0]) >> 16; + elm_write_reg(info, offset, val); + break; + default: + pr_err("invalid config bch_type\n"); + } + } + + /* Update ecc pointer with ecc byte size */ + ecc += info->ecc_syndrome_size; + } +} + +/** + * elm_start_processing - start elm syndrome processing + * @info: elm info + * @err_vec: elm error vectors + * + * Set syndrome valid bit for syndrome fragment registers for which + * elm syndrome fragment registers are loaded. This enables elm module + * to start processing syndrome vectors. + */ +static void elm_start_processing(struct elm_info *info, + struct elm_errorvec *err_vec) +{ + int i, offset; + u32 reg_val; + + /* + * Set syndrome vector valid, so that ELM module + * will process it for vectors error is reported + */ + for (i = 0; i < info->ecc_steps; i++) { + if (err_vec[i].error_reported) { + offset = ELM_SYNDROME_FRAGMENT_6 + + SYNDROME_FRAGMENT_REG_SIZE * i; + reg_val = elm_read_reg(info, offset); + reg_val |= ELM_SYNDROME_VALID; + elm_write_reg(info, offset, reg_val); + } + } +} + +/** + * elm_error_correction - locate correctable error position + * @info: elm info + * @err_vec: elm error vectors + * + * On completion of processing by elm module, error location status + * register updated with correctable/uncorrectable error information. + * In case of correctable errors, number of errors located from + * elm location status register & read the positions from + * elm error location register. + */ +static void elm_error_correction(struct elm_info *info, + struct elm_errorvec *err_vec) +{ + int i, j, errors = 0; + int offset; + u32 reg_val; + + for (i = 0; i < info->ecc_steps; i++) { + + /* Check error reported */ + if (err_vec[i].error_reported) { + offset = ELM_LOCATION_STATUS + ERROR_LOCATION_SIZE * i; + reg_val = elm_read_reg(info, offset); + + /* Check correctable error or not */ + if (reg_val & ECC_CORRECTABLE_MASK) { + offset = ELM_ERROR_LOCATION_0 + + ERROR_LOCATION_SIZE * i; + + /* Read count of correctable errors */ + err_vec[i].error_count = reg_val & + ECC_NB_ERRORS_MASK; + + /* Update the error locations in error vector */ + for (j = 0; j < err_vec[i].error_count; j++) { + + reg_val = elm_read_reg(info, offset); + err_vec[i].error_loc[j] = reg_val & + ECC_ERROR_LOCATION_MASK; + + /* Update error location register */ + offset += 4; + } + + errors += err_vec[i].error_count; + } else { + err_vec[i].error_uncorrectable = true; + } + + /* Clearing interrupts for processed error vectors */ + elm_write_reg(info, ELM_IRQSTATUS, BIT(i)); + + /* Disable page mode */ + elm_configure_page_mode(info, i, false); + } + } +} + +static int elm_poll(struct elm_info *info) +{ + u32 reg_val; + + reg_val = elm_read_reg(info, ELM_IRQSTATUS); + + /* All error vectors processed */ + if (reg_val & INTR_STATUS_PAGE_VALID) { + elm_write_reg(info, ELM_IRQSTATUS, + reg_val & INTR_STATUS_PAGE_VALID); + return 0; + } + + return -EINPROGRESS; +} + +/** + * elm_decode_bch_error_page - Locate error position + * @dev: device pointer + * @ecc_calc: calculated ECC bytes from GPMC + * @err_vec: elm error vectors + * + * Called with one or more error reported vectors & vectors with + * error reported is updated in err_vec[].error_reported + */ +int elm_decode_bch_error_page(u8 *ecc_calc, struct elm_errorvec *err_vec) +{ + struct elm_info *info = ginfo; + u32 reg_val; + uint64_t start; + + if (!info) + return -ENODEV; + + /* Enable page mode interrupt */ + reg_val = elm_read_reg(info, ELM_IRQSTATUS); + elm_write_reg(info, ELM_IRQSTATUS, reg_val & INTR_STATUS_PAGE_VALID); + elm_write_reg(info, ELM_IRQENABLE, INTR_EN_PAGE_MASK); + + /* Load valid ecc byte to syndrome fragment register */ + elm_load_syndrome(info, err_vec, ecc_calc); + + /* Enable syndrome processing for which syndrome fragment is updated */ + elm_start_processing(info, err_vec); + + /* Wait for ELM module to finish locating error correction */ + start = get_time_ns(); + while (elm_poll(info) < 0) { + if (is_timeout(start, SECOND)) + return -ETIMEDOUT; + } + + /* Disable page mode interrupt */ + reg_val = elm_read_reg(info, ELM_IRQENABLE); + elm_write_reg(info, ELM_IRQENABLE, reg_val & ~INTR_EN_PAGE_MASK); + elm_error_correction(info, err_vec); + + return 0; +} + +static int elm_probe(struct device_d *dev) +{ + struct resource *res; + struct elm_info *info; + + info = xzalloc(sizeof(*info)); + + info->dev = dev; + + res = dev_request_mem_resource(dev, 0); + if (IS_ERR(res)) + return PTR_ERR(res); + info->elm_base = IOMEM(res->start); + + dev->priv = info; + + ginfo = info; + + return 0; +} + +static struct of_device_id elm_compatible[] = { + { + .compatible = "ti,am3352-elm", + }, { + /* sentinel */ + } +}; + +static struct driver_d omap_elm_driver = { + .name = "omap-elm", + .probe = elm_probe, + .of_compatible = DRV_OF_COMPAT(elm_compatible) +}; +coredevice_platform_driver(omap_elm_driver); diff --git a/drivers/mtd/peb.c b/drivers/mtd/peb.c index c82b3e8bba..d10a8a024d 100644 --- a/drivers/mtd/peb.c +++ b/drivers/mtd/peb.c @@ -438,6 +438,90 @@ int mtd_peb_write(struct mtd_info *mtd, const void *buf, int pnum, int offset, } /** + * mtd_peb_write_file - write data into a mtd device + * @mtd: mtd device + * @peb_start: The first PEB where to start writing + * @max_pebs: Maximum number of PEBs we have space to write to + * @buf: buffer with the data to write + * @len: how many bytes to write + * + * This function writes @len bytes of data from buffer @buf to the mtd device + * @mtd starting at @peb_start. At maxmimum @max_pebs are used. We always write + * full pebs. If the buffer is not peb size aligned the last peb will be padded + * with zeroes. This function skips all bad blocks and returns 0 on success or a + * negative error code otherwise. + */ +int mtd_peb_write_file(struct mtd_info *mtd, int peb_start, int max_pebs, + const void *buf, size_t len) +{ + int ret, pnum; + size_t left; + + pnum = peb_start; + left = len; + + /* First pass: Check if file will fit into remaining space */ + while (1) { + if ((uint64_t)pnum * mtd->erasesize >= mtd->size) + return -ENOSPC; + + if (pnum >= peb_start + max_pebs) + return -ENOSPC; + + if (mtd_peb_is_bad(mtd, pnum)) { + pnum++; + continue; + } + + if (left <= mtd->erasesize) + break; + + left -= mtd->erasesize; + pnum++; + } + + pnum = peb_start; + left = len; + + /* Second pass: actually write file */ + while (left) { + size_t now = min_t(size_t, mtd->erasesize, left); + + if (mtd_peb_is_bad(mtd, pnum)) { + pnum++; + continue; + } + + ret = mtd_peb_erase(mtd, pnum); + if (ret) + goto out; + + if (now < mtd->erasesize) { + void *wrbuf = xzalloc(mtd->erasesize); + + memcpy(wrbuf, buf, now); + + ret = mtd_peb_write(mtd, wrbuf, pnum, 0, mtd->erasesize); + + free(wrbuf); + } else { + ret = mtd_peb_write(mtd, buf, pnum, 0, mtd->erasesize); + } + + if (ret) + goto out; + + left -= now; + pnum++; + buf += now; + } + + ret = 0; +out: + return ret; +} + +/** * mtd_peb_erase - erase a physical eraseblock. * @mtd: mtd device * @pnum: physical eraseblock number to erase diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c index 9dbc8302ed..b251035982 100644 --- a/drivers/mtd/spi-nor/spi-nor.c +++ b/drivers/mtd/spi-nor/spi-nor.c @@ -57,7 +57,7 @@ struct flash_info { u16 page_size; u16 addr_width; - u16 flags; + u32 flags; #define SECT_4K BIT(0) /* SPINOR_OP_BE_4K works uniformly */ #define SPI_NOR_NO_ERASE BIT(1) /* No erase command needed */ #define SST_WRITE BIT(2) /* use SST byte programming */ @@ -86,6 +86,7 @@ struct flash_info { #define SPI_NOR_SKIP_SFDP BIT(13) /* Skip parsing of SFDP tables */ #define USE_CLSR BIT(14) /* use CLSR command */ #define SPI_NOR_OCTAL_READ BIT(15) /* Flash supports Octal Read */ +#define UNLOCK_GLOBAL_BLOCK BIT(16) /* Unlock global block protection */ }; enum spi_nor_read_command_index { @@ -725,6 +726,9 @@ static const struct spi_device_id spi_nor_ids[] = { { "n25q512a", INFO(0x20bb20, 0, 64 * 1024, 1024, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) }, { "n25q512ax3", INFO(0x20ba20, 0, 64 * 1024, 1024, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) }, { "n25q00", INFO(0x20ba21, 0, 64 * 1024, 2048, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) }, + { "n25q00a", INFO(0x20bb21, 0, 64 * 1024, 2048, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | NO_CHIP_ERASE) }, + { "mt25qu02g", INFO(0x20bb22, 0, 64 * 1024, 4096, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | NO_CHIP_ERASE) }, + { "mt25ql02g", INFO(0x20ba22, 0, 64 * 1024, 4096, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | NO_CHIP_ERASE) }, /* PMC */ { "pm25lv512", INFO(0, 0, 32 * 1024, 2, SECT_4K_PMC) }, @@ -736,6 +740,10 @@ static const struct spi_device_id spi_nor_ids[] = { */ { "s25sl032p", INFO(0x010215, 0x4d00, 64 * 1024, 64, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, { "s25sl064p", INFO(0x010216, 0x4d00, 64 * 1024, 128, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, + { "s25fl128s0", INFO6(0x012018, 0x4d0080, 256 * 1024, 64, + SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | USE_CLSR) }, + { "s25fl128s1", INFO6(0x012018, 0x4d0180, 64 * 1024, 256, + SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | USE_CLSR) }, { "s25fl256s0", INFO(0x010219, 0x4d00, 256 * 1024, 128, 0) }, { "s25fl256s1", INFO(0x010219, 0x4d01, 64 * 1024, 512, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, { "s25fl512s", INFO(0x010220, 0x4d00, 256 * 1024, 256, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, @@ -773,6 +781,31 @@ static const struct spi_device_id spi_nor_ids[] = { { "sst25wf040b", INFO(0x621613, 0, 64 * 1024, 8, SECT_4K) }, { "sst25wf040", INFO(0xbf2504, 0, 64 * 1024, 8, SECT_4K | SST_WRITE) }, { "sst25wf080", INFO(0xbf2505, 0, 64 * 1024, 16, SECT_4K | SST_WRITE) }, + { + "sst26vf016b", INFO(0xbf2641, 0, 64 * 1024, 32, + SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | + UNLOCK_GLOBAL_BLOCK) + }, + { + "sst26vf032b", INFO(0xbf2642, 0, 64 * 1024, 64, + SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | + UNLOCK_GLOBAL_BLOCK) + }, + { + "sst26vf064b", INFO(0xbf2643, 0, 64 * 1024, 128, + SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | + UNLOCK_GLOBAL_BLOCK) + }, + { + "sst26vf040b", INFO(0xbf2654, 0, 64 * 1024, 8, + SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | + UNLOCK_GLOBAL_BLOCK) + }, + { + "sst26vf080b", INFO(0xbf2658, 0, 64 * 1024, 16, + SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | + UNLOCK_GLOBAL_BLOCK) + }, /* ST Microelectronics -- newer production may have feature updates */ { "m25p05", INFO(0x202010, 0, 32 * 1024, 2, 0) }, @@ -1067,6 +1100,17 @@ spi_nor_set_pp_settings(struct spi_nor_pp_command *pp, pp->proto = proto; } +static int spi_nor_unlock_global_block_protection(struct spi_nor *nor) +{ + int ret; + + write_enable(nor); + ret = nor->write_reg(nor, SPINOR_OP_GBULK, NULL, 0); + if (ret < 0) + return ret; + return spi_nor_wait_till_ready(nor); +} + static int spi_nor_init_params(struct spi_nor *nor, const struct flash_info *info, struct spi_nor_flash_parameter *params) @@ -1110,6 +1154,17 @@ static int spi_nor_init_params(struct spi_nor *nor, spi_nor_set_pp_settings(¶ms->page_programs[SNOR_CMD_PP], SPINOR_OP_PP, SNOR_PROTO_1_1_1); + if (info->flags & UNLOCK_GLOBAL_BLOCK) { + int err; + + err = spi_nor_unlock_global_block_protection(nor); + if (err) { + dev_err(nor->dev, + "Cannot unlock the global block protection\n"); + return err; + } + } + /* Select the procedure to set the Quad Enable bit. */ if (params->hwcaps.mask & (SNOR_HWCAPS_READ_QUAD | SNOR_HWCAPS_PP_QUAD)) diff --git a/drivers/net/cpsw.c b/drivers/net/cpsw.c index df8981d02e..b9a6575009 100644 --- a/drivers/net/cpsw.c +++ b/drivers/net/cpsw.c @@ -191,7 +191,6 @@ struct cpdma_chan { struct cpsw_priv { struct device_d *dev; - struct mii_bus miibus; u32 version; struct cpsw_platform_data data; @@ -199,7 +198,6 @@ struct cpsw_priv { uint8_t mac_addr[6]; struct cpsw_regs *regs; - struct cpsw_mdio_regs *mdio_regs; void *dma_regs; struct cpsw_host_regs *host_port_regs; void *ale_regs; @@ -219,6 +217,12 @@ struct cpsw_priv { struct cpsw_slave *slaves; }; +struct cpsw_mdio_priv { + struct device_d *dev; + struct mii_bus miibus; + struct cpsw_mdio_regs *mdio_regs; +}; + static int cpsw_ale_get_field(u32 *ale_entry, u32 start, u32 bits) { int idx; @@ -450,7 +454,7 @@ static inline void cpsw_ale_port_state(struct cpsw_priv *priv, int port, } /* wait until hardware is ready for another user access */ -static u32 wait_for_user_access(struct cpsw_priv *priv) +static u32 wait_for_user_access(struct cpsw_mdio_priv *priv) { struct cpsw_mdio_regs *mdio_regs = priv->mdio_regs; u32 tmp; @@ -473,7 +477,7 @@ static u32 wait_for_user_access(struct cpsw_priv *priv) static int cpsw_mdio_read(struct mii_bus *bus, int phy_id, int phy_reg) { - struct cpsw_priv *priv = bus->priv; + struct cpsw_mdio_priv *priv = bus->priv; struct cpsw_mdio_regs *mdio_regs = priv->mdio_regs; u32 tmp; @@ -494,7 +498,7 @@ static int cpsw_mdio_read(struct mii_bus *bus, int phy_id, int phy_reg) static int cpsw_mdio_write(struct mii_bus *bus, int phy_id, int phy_reg, u16 value) { - struct cpsw_priv *priv = bus->priv; + struct cpsw_mdio_priv *priv = bus->priv; struct cpsw_mdio_regs *mdio_regs = priv->mdio_regs; u32 tmp; @@ -510,6 +514,81 @@ static int cpsw_mdio_write(struct mii_bus *bus, int phy_id, int phy_reg, u16 val return 0; } +static int cpsw_mdio_probe(struct device_d *dev) +{ + struct resource *iores; + struct cpsw_mdio_priv *priv; + uint64_t start; + uint32_t phy_mask; + int ret; + + priv = xzalloc(sizeof(*priv)); + + iores = dev_request_mem_resource(dev, 0); + if (IS_ERR(iores)) + return PTR_ERR(iores); + priv->mdio_regs = IOMEM(iores->start); + priv->miibus.read = cpsw_mdio_read; + priv->miibus.write = cpsw_mdio_write; + priv->miibus.priv = priv; + priv->miibus.parent = dev; + + /* + * set enable and clock divider + * + * FIXME: Use a clock to calculate the divider + */ + writel(0xff | CONTROL_ENABLE, &priv->mdio_regs->control); + + /* + * wait for scan logic to settle: + * the scan time consists of (a) a large fixed component, and (b) a + * small component that varies with the mii bus frequency. These + * were estimated using measurements at 1.1 and 2.2 MHz on tnetv107x + * silicon. Since the effect of (b) was found to be largely + * negligible, we keep things simple here. + */ + udelay(1000); + + start = get_time_ns(); + while (1) { + phy_mask = readl(&priv->mdio_regs->alive); + if (phy_mask) { + dev_info(dev, "detected phy mask 0x%x\n", phy_mask); + phy_mask = ~phy_mask; + break; + } + if (is_timeout(start, 256 * MSECOND)) { + dev_err(dev, "no live phy, scanning all\n"); + phy_mask = 0; + break; + } + } + + priv->miibus.phy_mask = phy_mask; + + ret = mdiobus_register(&priv->miibus); + if (ret) + return ret; + + return 0; +} + +static __maybe_unused struct of_device_id cpsw_mdio_dt_ids[] = { + { + .compatible = "ti,cpsw-mdio", + }, { + /* sentinel */ + } +}; + +static struct driver_d cpsw_mdio_driver = { + .name = "cpsw-mdio", + .probe = cpsw_mdio_probe, + .of_compatible = DRV_OF_COMPAT(cpsw_mdio_dt_ids), +}; +coredevice_platform_driver(cpsw_mdio_driver); + static inline void soft_reset(struct cpsw_priv *priv, void *reg) { int ret; @@ -549,9 +628,9 @@ static int cpsw_set_hwaddr(struct eth_device *edev, const unsigned char *mac) return 0; } -static void cpsw_slave_update_link(struct cpsw_slave *slave, - struct cpsw_priv *priv, int *link) +static void cpsw_adjust_link(struct eth_device *edev) { + struct cpsw_slave *slave = edev->priv; struct phy_device *phydev = slave->edev.phydev; u32 mac_control = 0; @@ -561,7 +640,6 @@ static void cpsw_slave_update_link(struct cpsw_slave *slave, return; if (phydev->link) { - *link = 1; mac_control = BIT(5); /* MIIEN */ if (phydev->speed == SPEED_10) mac_control |= BIT(18); /* In Band mode */ @@ -584,27 +662,6 @@ static void cpsw_slave_update_link(struct cpsw_slave *slave, writel(mac_control, &slave->sliver->mac_control); } -static int cpsw_update_link(struct cpsw_slave *slave, struct cpsw_priv *priv) -{ - int link = 0; - - dev_dbg(&slave->dev, "* %s\n", __func__); - - cpsw_slave_update_link(slave, priv, &link); - - return link; -} - -static void cpsw_adjust_link(struct eth_device *edev) -{ - struct cpsw_slave *slave = edev->priv; - struct cpsw_priv *priv = slave->cpsw; - - dev_dbg(&slave->dev, "* %s\n", __func__); - - cpsw_update_link(slave, priv); -} - static inline u32 cpsw_get_slave_port(struct cpsw_priv *priv, u32 slave_num) { if (priv->host_port == 0) @@ -748,6 +805,11 @@ static int cpsw_open(struct eth_device *edev) dev_dbg(&slave->dev, "* %s\n", __func__); + ret = phy_device_connect(edev, NULL, slave->phy_id, + cpsw_adjust_link, 0, slave->phy_if); + if (ret) + return ret; + /* soft reset the controller and initialize priv */ soft_reset(priv, &priv->regs->soft_reset); @@ -774,7 +836,6 @@ static int cpsw_open(struct eth_device *edev) cpsw_ale_add_mcast(priv, ethbdaddr, 1 << priv->host_port); cpsw_slave_init(slave, priv); - cpsw_update_link(slave, priv); /* init descriptor pool */ for (i = 0; i < NUM_DESCS; i++) { @@ -898,11 +959,6 @@ static int cpsw_slave_setup(struct cpsw_slave *slave, int slave_num, edev->parent = dev; - ret = phy_device_connect(edev, &priv->miibus, slave->phy_id, - cpsw_adjust_link, 0, slave->phy_if); - if (ret) - goto err_out; - dev_set_name(dev, "cpsw-slave"); dev->id = slave->slave_num; dev->parent = priv->dev; @@ -936,7 +992,7 @@ err_register_dev: phy_unregister_device(edev->phydev); err_register_edev: unregister_device(dev); -err_out: + slave->slave_num = -1; return ret; @@ -1117,13 +1173,15 @@ static int cpsw_probe(struct device_d *dev) struct cpsw_platform_data *data = (struct cpsw_platform_data *)dev->platform_data; struct cpsw_priv *priv; void __iomem *regs; - uint64_t start; - uint32_t phy_mask; struct cpsw_data *cpsw_data; int i, ret; dev_dbg(dev, "* %s\n", __func__); + ret = of_platform_populate(dev->device_node, NULL, dev); + if (ret) + return ret; + iores = dev_request_mem_resource(dev, 0); if (IS_ERR(iores)) return PTR_ERR(iores); @@ -1168,53 +1226,11 @@ static int cpsw_probe(struct device_d *dev) priv->dma_regs = regs + cpsw_data->cpdma_reg_ofs; priv->ale_regs = regs + cpsw_data->ale_reg_ofs; priv->state_ram = regs + cpsw_data->state_ram_ofs; - priv->mdio_regs = regs + cpsw_data->mdio_reg_ofs; priv->slave_ofs = cpsw_data->slave_ofs; priv->slave_size = cpsw_data->slave_size; priv->sliver_ofs = cpsw_data->sliver_ofs; - priv->miibus.read = cpsw_mdio_read; - priv->miibus.write = cpsw_mdio_write; - priv->miibus.priv = priv; - priv->miibus.parent = dev; - - /* - * set enable and clock divider - * - * FIXME: Use a clock to calculate the divider - */ - writel(0xff | CONTROL_ENABLE, &priv->mdio_regs->control); - - /* - * wait for scan logic to settle: - * the scan time consists of (a) a large fixed component, and (b) a - * small component that varies with the mii bus frequency. These - * were estimated using measurements at 1.1 and 2.2 MHz on tnetv107x - * silicon. Since the effect of (b) was found to be largely - * negligible, we keep things simple here. - */ - udelay(1000); - - start = get_time_ns(); - while (1) { - phy_mask = readl(&priv->mdio_regs->alive); - if (phy_mask) { - dev_info(dev, "detected phy mask 0x%x\n", phy_mask); - phy_mask = ~phy_mask; - break; - } - if (is_timeout(start, 256 * MSECOND)) { - dev_err(dev, "no live phy, scanning all\n"); - phy_mask = 0; - break; - } - } - - priv->miibus.phy_mask = phy_mask; - - mdiobus_register(&priv->miibus); - for (i = 0; i < priv->num_slaves; i++) { ret = cpsw_slave_setup(&priv->slaves[i], i, priv); if (ret) { @@ -1245,8 +1261,6 @@ static void cpsw_remove(struct device_d *dev) eth_unregister(&slave->edev); } - - mdiobus_unregister(&priv->miibus); } static __maybe_unused struct of_device_id cpsw_dt_ids[] = { diff --git a/drivers/net/macb.c b/drivers/net/macb.c index a0411d6e4b..c4ab9efb63 100644 --- a/drivers/net/macb.c +++ b/drivers/net/macb.c @@ -322,6 +322,29 @@ static void macb_configure_dma(struct macb_device *bp) } } +static int gmac_init_dummy_tx_queues(struct macb_device *macb) +{ + int i, num_queues = 1; + u32 queue_mask; + + /* bit 0 is never set but queue 0 always exists */ + queue_mask = gem_readl(macb, DCFG6) & 0xff; + queue_mask |= 0x1; + + for (i = 1; i < MACB_MAX_QUEUES; i++) + if (queue_mask & (1 << i)) + num_queues++; + + macb->gem_q1_descs[0].addr = 0; + macb->gem_q1_descs[0].ctrl = MACB_BIT(TX_WRAP) | + MACB_BIT(TX_LAST) | MACB_BIT(TX_USED); + + for (i = 1; i < num_queues; i++) + gem_writel_queue_TBQP(macb, &macb->gem_q1_descs[0], i - 1); + + return 0; +} + static void macb_init(struct macb_device *macb) { unsigned long paddr, val = 0; @@ -357,16 +380,13 @@ static void macb_init(struct macb_device *macb) macb_writel(macb, TBQP, (ulong)macb->tx_ring); if (macb->is_gem && macb->gem_q1_descs) { - /* Disable the second priority queue */ - macb->gem_q1_descs[0].addr = 0; - macb->gem_q1_descs[0].ctrl = MACB_BIT(TX_WRAP) | - MACB_BIT(TX_LAST) | - MACB_BIT(TX_USED); + gmac_init_dummy_tx_queues(macb); + + /* Disable the second priority rx queue */ macb->gem_q1_descs[1].addr = MACB_BIT(RX_USED) | MACB_BIT(RX_WRAP); macb->gem_q1_descs[1].ctrl = 0; - gem_writel(macb, TQ1, (ulong)&macb->gem_q1_descs[0]); gem_writel(macb, RQ1, (ulong)&macb->gem_q1_descs[1]); } @@ -750,6 +770,7 @@ static void macb_remove(struct device_d *dev) static const struct of_device_id macb_dt_ids[] = { { .compatible = "cdns,at91sam9260-macb",}, + { .compatible = "atmel,sama5d2-gem",}, { .compatible = "atmel,sama5d3-gem",}, { .compatible = "cdns,zynqmp-gem",}, { /* sentinel */ } diff --git a/drivers/net/macb.h b/drivers/net/macb.h index fda4d08663..2e5b64e5e9 100644 --- a/drivers/net/macb.h +++ b/drivers/net/macb.h @@ -5,6 +5,8 @@ #ifndef __DRIVERS_MACB_H__ #define __DRIVERS_MACB_H__ +#define MACB_MAX_QUEUES 8 + /* MACB register offsets */ #define MACB_NCR 0x0000 #define MACB_NCFGR 0x0004 @@ -75,6 +77,8 @@ #define GEM_TQ1 0x0440 #define GEM_RQ1 0x0480 +#define GEM_TBQP(hw_q) (0x0440 + ((hw_q) << 2)) + /* Bitfields in NCR */ #define MACB_LB_OFFSET 0 #define MACB_LB_SIZE 1 @@ -436,4 +440,7 @@ struct macb_dma_desc { #define MACB_TX_USED_OFFSET 31 #define MACB_TX_USED_SIZE 1 +#define gem_writel_queue_TBQP(port, value, queue_num) \ + writel((value), (port)->regs + GEM_TBQP(queue_num)) + #endif /* __DRIVERS_MACB_H__ */ diff --git a/drivers/net/phy/mv88e6xxx/chip.c b/drivers/net/phy/mv88e6xxx/chip.c index ac08b5ef54..9688dbd1be 100644 --- a/drivers/net/phy/mv88e6xxx/chip.c +++ b/drivers/net/phy/mv88e6xxx/chip.c @@ -572,7 +572,6 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = { .name = "Marvell 88E6352", .num_ports = 7, .port_base_addr = 0x10, - .ops = &mv88e6352_ops, .global2_addr = 0x1c, .ops = &mv88e6352_ops, }, diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c index 0d5dcb31ee..ea7cea5f1b 100644 --- a/drivers/net/smc911x.c +++ b/drivers/net/smc911x.c @@ -540,7 +540,7 @@ static int smc911x_probe(struct device_d *dev) * poll the READY bit in PMT_CTRL. Any other access to the device is * forbidden while this bit isn't set. Try for 100ms */ - ret = wait_on_timeout(100 * MSECOND, !smc911x_reg_read(priv, PMT_CTRL) & PMT_CTRL_READY); + ret = wait_on_timeout(100 * MSECOND, smc911x_reg_read(priv, PMT_CTRL) & PMT_CTRL_READY); if (!ret) { dev_err(dev, "Device not READY in 100ms aborting\n"); return -ENODEV; diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c index e0984708b4..d2c2b6f306 100644 --- a/drivers/nvme/host/core.c +++ b/drivers/nvme/host/core.c @@ -94,7 +94,7 @@ EXPORT_SYMBOL_GPL(nvme_set_queue_count); static int nvme_wait_ready(struct nvme_ctrl *ctrl, u64 cap, bool enabled) { uint64_t start = get_time_ns(); - unsigned long timeout = + uint64_t timeout = ((NVME_CAP_TIMEOUT(cap) + 1) * HZ / 2); u32 csts, bit = enabled ? NVME_CSTS_RDY : 0; int ret; @@ -496,7 +496,7 @@ EXPORT_SYMBOL_GPL(nvme_enable_ctrl); int nvme_shutdown_ctrl(struct nvme_ctrl *ctrl) { uint64_t start = get_time_ns(); - unsigned long timeout = SHUTDOWN_TIMEOUT; + uint64_t timeout = SHUTDOWN_TIMEOUT; u32 csts; int ret; diff --git a/drivers/serial/atmel.c b/drivers/serial/atmel.c index 2f8adc989f..8394273f9f 100644 --- a/drivers/serial/atmel.c +++ b/drivers/serial/atmel.c @@ -436,6 +436,7 @@ static int atmel_serial_probe(struct device_d *dev) cdev->getc = atmel_serial_getc; cdev->setbrg = atmel_serial_setbaudrate; cdev->set_mode = atmel_serial_set_mode; + cdev->linux_console_name = "ttyAT"; atmel_serial_init_port(cdev); diff --git a/drivers/serial/efi-stdio.c b/drivers/serial/efi-stdio.c index 0703f727e7..2ca89fa4f8 100644 --- a/drivers/serial/efi-stdio.c +++ b/drivers/serial/efi-stdio.c @@ -243,12 +243,13 @@ static int efi_process_key(struct efi_console_priv *priv, const char *inp) return 1; } -static int efi_console_puts(struct console_device *cdev, const char *s) +static int efi_console_puts(struct console_device *cdev, const char *s, + size_t nbytes) { struct efi_console_priv *priv = to_efi(cdev); int n = 0; - while (*s) { + while (nbytes--) { if (*s == 27) { priv->efi_console_buffer[n] = 0; priv->out->output_string(priv->out, diff --git a/drivers/serial/serial_efi.c b/drivers/serial/serial_efi.c index f0a2b22c2b..667d51f622 100644 --- a/drivers/serial/serial_efi.c +++ b/drivers/serial/serial_efi.c @@ -130,13 +130,14 @@ static void efi_serial_putc(struct console_device *cdev, char c) serial->write(serial, &buffersize, &c); } -static int efi_serial_puts(struct console_device *cdev, const char *s) +static int efi_serial_puts(struct console_device *cdev, const char *s, + size_t nbytes) { struct efi_serial_port *uart = to_efi_serial_port(cdev); struct efi_serial_io_protocol *serial = uart->serial; uint32_t control; efi_status_t efiret; - unsigned long buffersize = strlen(s) * sizeof(char); + unsigned long buffersize = nbytes; do { efiret = serial->getcontrol(serial, &control); diff --git a/drivers/serial/serial_stm32.c b/drivers/serial/serial_stm32.c index a84e64e974..4bbfb1eef7 100644 --- a/drivers/serial/serial_stm32.c +++ b/drivers/serial/serial_stm32.c @@ -182,6 +182,7 @@ static int stm32_serial_probe(struct device_d *dev) cdev->getc = stm32_serial_getc; cdev->flush = stm32_serial_flush; cdev->setbrg = stm32_serial_setbaudrate; + cdev->linux_console_name = "ttySTM"; if (dev->device_node) { devname = of_alias_get(dev->device_node); diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 86411a76ff..9d4b1cc4e3 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -25,6 +25,15 @@ config DRIVER_SPI_ATMEL bool "Atmel (AT91) SPI Master driver" depends on ARCH_AT91 +config SPI_ATMEL_QUADSPI + tristate "Atmel Quad SPI Controller" + depends on ARCH_AT91 + depends on SPI_MEM + help + This enables support for the Quad SPI controller in master mode. + This driver does not support generic SPI. The implementation only + supports spi-mem interface. + config DRIVER_SPI_FSL_QUADSPI bool "Freescale QSPI controller" depends on SPI_MEM diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index dd8a8cb8b0..c5d2de74e1 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -8,5 +8,6 @@ obj-$(CONFIG_DRIVER_SPI_MVEBU) += mvebu_spi.o obj-$(CONFIG_DRIVER_SPI_MXS) += mxs_spi.o obj-$(CONFIG_DRIVER_SPI_ALTERA) += altera_spi.o obj-$(CONFIG_DRIVER_SPI_ATMEL) += atmel_spi.o +obj-$(CONFIG_SPI_ATMEL_QUADSPI) += atmel-quadspi.o obj-$(CONFIG_DRIVER_SPI_OMAP3) += omap3_spi.o obj-$(CONFIG_DRIVER_SPI_DSPI) += dspi_spi.o diff --git a/drivers/spi/atmel-quadspi.c b/drivers/spi/atmel-quadspi.c new file mode 100644 index 0000000000..6799f95ea3 --- /dev/null +++ b/drivers/spi/atmel-quadspi.c @@ -0,0 +1,541 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Driver for Atmel QSPI Controller + * + * Copyright (C) 2015 Atmel Corporation + * Copyright (C) 2018 Cryptera A/S + * + * Author: Cyrille Pitchen <cyrille.pitchen@atmel.com> + * Author: Piotr Bugalski <bugalski.piotr@gmail.com> + * + * This driver is based on drivers/mtd/spi-nor/fsl-quadspi.c from Freescale. + */ + +#include <common.h> +#include <init.h> +#include <driver.h> +#include <errno.h> +#include <clock.h> +#include <xfuncs.h> +#include <gpio.h> +#include <of_gpio.h> +#include <io.h> +#include <spi/spi.h> +#include <mach/iomux.h> +#include <mach/board.h> +#include <mach/cpu.h> +#include <linux/clk.h> +#include <linux/err.h> + +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/kernel.h> +#include <linux/spi/spi-mem.h> +#include <of_device.h> +#include <linux/iopoll.h> + +#define writel_relaxed writel +#define readl_relaxed readl + +/* QSPI register offsets */ +#define QSPI_CR 0x0000 /* Control Register */ +#define QSPI_MR 0x0004 /* Mode Register */ +#define QSPI_RD 0x0008 /* Receive Data Register */ +#define QSPI_TD 0x000c /* Transmit Data Register */ +#define QSPI_SR 0x0010 /* Status Register */ +#define QSPI_IER 0x0014 /* Interrupt Enable Register */ +#define QSPI_IDR 0x0018 /* Interrupt Disable Register */ +#define QSPI_IMR 0x001c /* Interrupt Mask Register */ +#define QSPI_SCR 0x0020 /* Serial Clock Register */ + +#define QSPI_IAR 0x0030 /* Instruction Address Register */ +#define QSPI_ICR 0x0034 /* Instruction Code Register */ +#define QSPI_WICR 0x0034 /* Write Instruction Code Register */ +#define QSPI_IFR 0x0038 /* Instruction Frame Register */ +#define QSPI_RICR 0x003C /* Read Instruction Code Register */ + +#define QSPI_SMR 0x0040 /* Scrambling Mode Register */ +#define QSPI_SKR 0x0044 /* Scrambling Key Register */ + +#define QSPI_WPMR 0x00E4 /* Write Protection Mode Register */ +#define QSPI_WPSR 0x00E8 /* Write Protection Status Register */ + +#define QSPI_VERSION 0x00FC /* Version Register */ + + +/* Bitfields in QSPI_CR (Control Register) */ +#define QSPI_CR_QSPIEN BIT(0) +#define QSPI_CR_QSPIDIS BIT(1) +#define QSPI_CR_SWRST BIT(7) +#define QSPI_CR_LASTXFER BIT(24) + +/* Bitfields in QSPI_MR (Mode Register) */ +#define QSPI_MR_SMM BIT(0) +#define QSPI_MR_LLB BIT(1) +#define QSPI_MR_WDRBT BIT(2) +#define QSPI_MR_SMRM BIT(3) +#define QSPI_MR_CSMODE_MASK GENMASK(5, 4) +#define QSPI_MR_CSMODE_NOT_RELOADED (0 << 4) +#define QSPI_MR_CSMODE_LASTXFER (1 << 4) +#define QSPI_MR_CSMODE_SYSTEMATICALLY (2 << 4) +#define QSPI_MR_NBBITS_MASK GENMASK(11, 8) +#define QSPI_MR_NBBITS(n) ((((n) - 8) << 8) & QSPI_MR_NBBITS_MASK) +#define QSPI_MR_DLYBCT_MASK GENMASK(23, 16) +#define QSPI_MR_DLYBCT(n) (((n) << 16) & QSPI_MR_DLYBCT_MASK) +#define QSPI_MR_DLYCS_MASK GENMASK(31, 24) +#define QSPI_MR_DLYCS(n) (((n) << 24) & QSPI_MR_DLYCS_MASK) + +/* Bitfields in QSPI_SR/QSPI_IER/QSPI_IDR/QSPI_IMR */ +#define QSPI_SR_RDRF BIT(0) +#define QSPI_SR_TDRE BIT(1) +#define QSPI_SR_TXEMPTY BIT(2) +#define QSPI_SR_OVRES BIT(3) +#define QSPI_SR_CSR BIT(8) +#define QSPI_SR_CSS BIT(9) +#define QSPI_SR_INSTRE BIT(10) +#define QSPI_SR_QSPIENS BIT(24) + +#define QSPI_SR_CMD_COMPLETED (QSPI_SR_INSTRE | QSPI_SR_CSR) + +/* Bitfields in QSPI_SCR (Serial Clock Register) */ +#define QSPI_SCR_CPOL BIT(0) +#define QSPI_SCR_CPHA BIT(1) +#define QSPI_SCR_SCBR_MASK GENMASK(15, 8) +#define QSPI_SCR_SCBR(n) (((n) << 8) & QSPI_SCR_SCBR_MASK) +#define QSPI_SCR_DLYBS_MASK GENMASK(23, 16) +#define QSPI_SCR_DLYBS(n) (((n) << 16) & QSPI_SCR_DLYBS_MASK) + +/* Bitfields in QSPI_ICR (Read/Write Instruction Code Register) */ +#define QSPI_ICR_INST_MASK GENMASK(7, 0) +#define QSPI_ICR_INST(inst) (((inst) << 0) & QSPI_ICR_INST_MASK) +#define QSPI_ICR_OPT_MASK GENMASK(23, 16) +#define QSPI_ICR_OPT(opt) (((opt) << 16) & QSPI_ICR_OPT_MASK) + +/* Bitfields in QSPI_IFR (Instruction Frame Register) */ +#define QSPI_IFR_WIDTH_MASK GENMASK(2, 0) +#define QSPI_IFR_WIDTH_SINGLE_BIT_SPI (0 << 0) +#define QSPI_IFR_WIDTH_DUAL_OUTPUT (1 << 0) +#define QSPI_IFR_WIDTH_QUAD_OUTPUT (2 << 0) +#define QSPI_IFR_WIDTH_DUAL_IO (3 << 0) +#define QSPI_IFR_WIDTH_QUAD_IO (4 << 0) +#define QSPI_IFR_WIDTH_DUAL_CMD (5 << 0) +#define QSPI_IFR_WIDTH_QUAD_CMD (6 << 0) +#define QSPI_IFR_INSTEN BIT(4) +#define QSPI_IFR_ADDREN BIT(5) +#define QSPI_IFR_OPTEN BIT(6) +#define QSPI_IFR_DATAEN BIT(7) +#define QSPI_IFR_OPTL_MASK GENMASK(9, 8) +#define QSPI_IFR_OPTL_1BIT (0 << 8) +#define QSPI_IFR_OPTL_2BIT (1 << 8) +#define QSPI_IFR_OPTL_4BIT (2 << 8) +#define QSPI_IFR_OPTL_8BIT (3 << 8) +#define QSPI_IFR_ADDRL BIT(10) +#define QSPI_IFR_TFRTYP_MEM BIT(12) +#define QSPI_IFR_SAMA5D2_WRITE_TRSFR BIT(13) +#define QSPI_IFR_CRM BIT(14) +#define QSPI_IFR_NBDUM_MASK GENMASK(20, 16) +#define QSPI_IFR_NBDUM(n) (((n) << 16) & QSPI_IFR_NBDUM_MASK) +#define QSPI_IFR_APBTFRTYP_READ BIT(24) /* Defined in SAM9X60 */ + +/* Bitfields in QSPI_SMR (Scrambling Mode Register) */ +#define QSPI_SMR_SCREN BIT(0) +#define QSPI_SMR_RVDIS BIT(1) + +/* Bitfields in QSPI_WPMR (Write Protection Mode Register) */ +#define QSPI_WPMR_WPEN BIT(0) +#define QSPI_WPMR_WPKEY_MASK GENMASK(31, 8) +#define QSPI_WPMR_WPKEY(wpkey) (((wpkey) << 8) & QSPI_WPMR_WPKEY_MASK) + +/* Bitfields in QSPI_WPSR (Write Protection Status Register) */ +#define QSPI_WPSR_WPVS BIT(0) +#define QSPI_WPSR_WPVSRC_MASK GENMASK(15, 8) +#define QSPI_WPSR_WPVSRC(src) (((src) << 8) & QSPI_WPSR_WPVSRC) + +struct atmel_qspi_caps { + bool has_qspick; + bool has_ricr; +}; + +struct atmel_qspi { + struct spi_controller ctlr; + void __iomem *regs; + void __iomem *mem; + struct clk *pclk; + struct clk *qspick; + struct platform_device *pdev; + const struct atmel_qspi_caps *caps; + u32 mr; +}; + +struct atmel_qspi_mode { + u8 cmd_buswidth; + u8 addr_buswidth; + u8 data_buswidth; + u32 config; +}; + +static const struct atmel_qspi_mode atmel_qspi_modes[] = { + { 1, 1, 1, QSPI_IFR_WIDTH_SINGLE_BIT_SPI }, + { 1, 1, 2, QSPI_IFR_WIDTH_DUAL_OUTPUT }, + { 1, 1, 4, QSPI_IFR_WIDTH_QUAD_OUTPUT }, + { 1, 2, 2, QSPI_IFR_WIDTH_DUAL_IO }, + { 1, 4, 4, QSPI_IFR_WIDTH_QUAD_IO }, + { 2, 2, 2, QSPI_IFR_WIDTH_DUAL_CMD }, + { 4, 4, 4, QSPI_IFR_WIDTH_QUAD_CMD }, +}; + +static inline bool atmel_qspi_is_compatible(const struct spi_mem_op *op, + const struct atmel_qspi_mode *mode) +{ + if (op->cmd.buswidth != mode->cmd_buswidth) + return false; + + if (op->addr.nbytes && op->addr.buswidth != mode->addr_buswidth) + return false; + + if (op->data.nbytes && op->data.buswidth != mode->data_buswidth) + return false; + + return true; +} + +static int atmel_qspi_find_mode(const struct spi_mem_op *op) +{ + u32 i; + + for (i = 0; i < ARRAY_SIZE(atmel_qspi_modes); i++) + if (atmel_qspi_is_compatible(op, &atmel_qspi_modes[i])) + return i; + + return -ENOTSUPP; +} + +static bool atmel_qspi_supports_op(struct spi_mem *mem, + const struct spi_mem_op *op) +{ + if (atmel_qspi_find_mode(op) < 0) + return false; + + /* special case not supported by hardware */ + if (op->addr.nbytes == 2 && op->cmd.buswidth != op->addr.buswidth && + op->dummy.nbytes == 0) + return false; + + return true; +} + +static int atmel_qspi_set_cfg(struct atmel_qspi *aq, + const struct spi_mem_op *op, u32 *offset) +{ + u32 iar, icr, ifr; + u32 dummy_cycles = 0; + int mode; + + iar = 0; + icr = QSPI_ICR_INST(op->cmd.opcode); + ifr = QSPI_IFR_INSTEN; + + mode = atmel_qspi_find_mode(op); + if (mode < 0) + return mode; + ifr |= atmel_qspi_modes[mode].config; + + if (op->dummy.buswidth && op->dummy.nbytes) + dummy_cycles = op->dummy.nbytes * 8 / op->dummy.buswidth; + + /* + * The controller allows 24 and 32-bit addressing while NAND-flash + * requires 16-bit long. Handling 8-bit long addresses is done using + * the option field. For the 16-bit addresses, the workaround depends + * of the number of requested dummy bits. If there are 8 or more dummy + * cycles, the address is shifted and sent with the first dummy byte. + * Otherwise opcode is disabled and the first byte of the address + * contains the command opcode (works only if the opcode and address + * use the same buswidth). The limitation is when the 16-bit address is + * used without enough dummy cycles and the opcode is using a different + * buswidth than the address. + */ + if (op->addr.buswidth) { + switch (op->addr.nbytes) { + case 0: + break; + case 1: + ifr |= QSPI_IFR_OPTEN | QSPI_IFR_OPTL_8BIT; + icr |= QSPI_ICR_OPT(op->addr.val & 0xff); + break; + case 2: + if (dummy_cycles < 8 / op->addr.buswidth) { + ifr &= ~QSPI_IFR_INSTEN; + ifr |= QSPI_IFR_ADDREN; + iar = (op->cmd.opcode << 16) | + (op->addr.val & 0xffff); + } else { + ifr |= QSPI_IFR_ADDREN; + iar = (op->addr.val << 8) & 0xffffff; + dummy_cycles -= 8 / op->addr.buswidth; + } + break; + case 3: + ifr |= QSPI_IFR_ADDREN; + iar = op->addr.val & 0xffffff; + break; + case 4: + ifr |= QSPI_IFR_ADDREN | QSPI_IFR_ADDRL; + iar = op->addr.val & 0x7ffffff; + break; + default: + return -ENOTSUPP; + } + } + + /* offset of the data access in the QSPI memory space */ + *offset = iar; + + /* Set number of dummy cycles */ + if (dummy_cycles) + ifr |= QSPI_IFR_NBDUM(dummy_cycles); + + /* Set data enable */ + if (op->data.nbytes) + ifr |= QSPI_IFR_DATAEN; + + /* + * If the QSPI controller is set in regular SPI mode, set it in + * Serial Memory Mode (SMM). + */ + if (aq->mr != QSPI_MR_SMM) { + writel_relaxed(QSPI_MR_SMM, aq->regs + QSPI_MR); + aq->mr = QSPI_MR_SMM; + } + + /* Clear pending interrupts */ + (void)readl_relaxed(aq->regs + QSPI_SR); + + if (aq->caps->has_ricr) { + if (!op->addr.nbytes && op->data.dir == SPI_MEM_DATA_IN) + ifr |= QSPI_IFR_APBTFRTYP_READ; + + /* Set QSPI Instruction Frame registers */ + writel_relaxed(iar, aq->regs + QSPI_IAR); + if (op->data.dir == SPI_MEM_DATA_IN) + writel_relaxed(icr, aq->regs + QSPI_RICR); + else + writel_relaxed(icr, aq->regs + QSPI_WICR); + writel_relaxed(ifr, aq->regs + QSPI_IFR); + } else { + if (op->data.dir == SPI_MEM_DATA_OUT) + ifr |= QSPI_IFR_SAMA5D2_WRITE_TRSFR; + + /* Set QSPI Instruction Frame registers */ + writel_relaxed(iar, aq->regs + QSPI_IAR); + writel_relaxed(icr, aq->regs + QSPI_ICR); + writel_relaxed(ifr, aq->regs + QSPI_IFR); + } + + return 0; +} + +static int atmel_qspi_exec_op(struct spi_mem *mem, const struct spi_mem_op *op) +{ + struct atmel_qspi *aq = spi_controller_get_devdata(mem->spi->controller); + u32 sr, imr, offset; + int err; + + err = atmel_qspi_set_cfg(aq, op, &offset); + if (err) + return err; + + /* Skip to the final steps if there is no data */ + if (op->data.nbytes) { + /* Dummy read of QSPI_IFR to synchronize APB and AHB accesses */ + (void)readl_relaxed(aq->regs + QSPI_IFR); + + /* Send/Receive data */ + if (op->data.dir == SPI_MEM_DATA_IN) + memcpy_fromio(op->data.buf.in, aq->mem + offset, + op->data.nbytes); + else + memcpy_toio(aq->mem + offset, op->data.buf.out, + op->data.nbytes); + + /* Release the chip-select */ + writel_relaxed(QSPI_CR_LASTXFER, aq->regs + QSPI_CR); + } + + /* Poll INSTruction End and Chip Select Rise flags. */ + imr = QSPI_SR_CMD_COMPLETED; + return readl_poll_timeout(aq->regs + QSPI_SR, sr, (sr & imr) == imr, + 1000000); +} + +static const char *atmel_qspi_get_name(struct spi_mem *mem) +{ + return dev_name(&mem->spi->dev); +} + +static const struct spi_controller_mem_ops atmel_qspi_mem_ops = { + .supports_op = atmel_qspi_supports_op, + .exec_op = atmel_qspi_exec_op, + .get_name = atmel_qspi_get_name +}; + +static int atmel_qspi_setup(struct spi_device *spi) +{ + struct atmel_qspi *aq = container_of(spi->controller, struct atmel_qspi, + ctlr); + unsigned long src_rate; + u32 scr, scbr; + + if (!spi->max_speed_hz) + return -EINVAL; + + src_rate = clk_get_rate(aq->pclk); + if (!src_rate) + return -EINVAL; + + /* Compute the QSPI baudrate */ + scbr = DIV_ROUND_UP(src_rate, spi->max_speed_hz); + if (scbr > 0) + scbr--; + + scr = QSPI_SCR_SCBR(scbr); + writel_relaxed(scr, aq->regs + QSPI_SCR); + + return 0; +} + +static int atmel_qspi_init(struct atmel_qspi *aq) +{ + /* Reset the QSPI controller */ + writel_relaxed(QSPI_CR_SWRST, aq->regs + QSPI_CR); + + /* Set the QSPI controller by default in Serial Memory Mode */ + writel_relaxed(QSPI_MR_SMM, aq->regs + QSPI_MR); + aq->mr = QSPI_MR_SMM; + + /* Enable the QSPI controller */ + writel_relaxed(QSPI_CR_QSPIEN, aq->regs + QSPI_CR); + + return 0; +} + +static int atmel_qspi_probe(struct device_d *dev) +{ + struct spi_controller *ctrl; + struct atmel_qspi *aq; + int err = 0; + + aq = xzalloc(sizeof(*aq)); + ctrl = &aq->ctlr; + + /* ctrl->mode_bits = SPI_RX_DUAL | SPI_RX_QUAD | SPI_TX_DUAL | SPI_TX_QUAD; */ + + ctrl->dev = dev; + ctrl->setup = atmel_qspi_setup; + ctrl->bus_num = -1; + ctrl->mem_ops = &atmel_qspi_mem_ops; + ctrl->num_chipselect = 1; + + spi_controller_set_devdata(ctrl, aq); + + /* Map the registers */ + aq->regs = dev_request_mem_region_by_name(dev, "qspi_base"); + if (IS_ERR(aq->regs)) { + dev_err(dev, "missing registers\n"); + err = PTR_ERR(aq->regs); + goto exit; + } + + /* Map the AHB memory */ + aq->mem = dev_request_mem_region_by_name(dev, "qspi_mmap"); + if (IS_ERR(aq->mem)) { + dev_err(dev, "missing AHB memory\n"); + err = PTR_ERR(aq->mem); + goto exit; + } + + /* Get the peripheral clock */ + aq->pclk = clk_get(dev, "pclk"); + if (IS_ERR(aq->pclk)) + aq->pclk = clk_get(dev, NULL); + + if (IS_ERR(aq->pclk)) { + dev_err(dev, "missing peripheral clock\n"); + err = PTR_ERR(aq->pclk); + goto exit; + } + + /* Enable the peripheral clock */ + err = clk_enable(aq->pclk); + if (err) { + dev_err(dev, "failed to enable the peripheral clock\n"); + goto exit; + } + + aq->caps = of_device_get_match_data(dev); + if (!aq->caps) { + dev_err(dev, "Could not retrieve QSPI caps\n"); + err = -EINVAL; + goto exit; + } + + if (aq->caps->has_qspick) { + /* Get the QSPI system clock */ + aq->qspick = clk_get(dev, "qspick"); + if (IS_ERR(aq->qspick)) { + dev_err(dev, "missing system clock\n"); + err = PTR_ERR(aq->qspick); + goto disable_pclk; + } + + /* Enable the QSPI system clock */ + err = clk_enable(aq->qspick); + if (err) { + dev_err(dev, "failed to enable the QSPI system clock\n"); + goto disable_pclk; + } + } + + err = atmel_qspi_init(aq); + if (err) + goto disable_qspick; + + err = spi_register_controller(ctrl); + if (err) + goto disable_qspick; + + return 0; + +disable_qspick: + clk_disable(aq->qspick); +disable_pclk: + clk_disable(aq->pclk); +exit: + return err; +} + +static const struct atmel_qspi_caps atmel_sama5d2_qspi_caps = {}; + +static const struct atmel_qspi_caps atmel_sam9x60_qspi_caps = { + .has_qspick = true, + .has_ricr = true, +}; + +static const struct of_device_id atmel_qspi_dt_ids[] = { + { + .compatible = "atmel,sama5d2-qspi", + .data = &atmel_sama5d2_qspi_caps, + }, + { + .compatible = "microchip,sam9x60-qspi", + .data = &atmel_sam9x60_qspi_caps, + }, + { /* sentinel */ } +}; + +static struct driver_d atmel_qspi_driver = { + .name = "atmel_qspi", + .of_compatible = atmel_qspi_dt_ids, + .probe = atmel_qspi_probe, +}; +device_platform_driver(atmel_qspi_driver); diff --git a/drivers/usb/gadget/fsl_udc.c b/drivers/usb/gadget/fsl_udc.c index a47ba20f46..a44c7abc01 100644 --- a/drivers/usb/gadget/fsl_udc.c +++ b/drivers/usb/gadget/fsl_udc.c @@ -1422,8 +1422,7 @@ static void udc_reset_ep_queue(struct fsl_udc *udc, u8 pipe) { struct fsl_ep *ep = get_ep_by_pipe(udc, pipe); - if (ep->name) - nuke(ep, -ESHUTDOWN); + nuke(ep, -ESHUTDOWN); } /* Clear up all ep queues */ @@ -1914,12 +1913,6 @@ static void dtd_complete_irq(struct fsl_udc *udc) curr_ep = get_ep_by_pipe(udc, i); - /* If the ep is configured */ - if (curr_ep->name == NULL) { - WARNING("Invalid EP?"); - continue; - } - /* process the req queue until an uncomplete request */ list_for_each_entry_safe(curr_req, temp_req, &curr_ep->queue, queue) { diff --git a/drivers/video/stm.c b/drivers/video/stm.c index 0c190d36ae..d4a618fe50 100644 --- a/drivers/video/stm.c +++ b/drivers/video/stm.c @@ -551,9 +551,9 @@ static int stmfb_probe(struct device_d *hw_dev) } modes = of_get_display_timings(display); - if (IS_ERR(modes)) { + if (!modes) { dev_err(hw_dev, "unable to parse display timings\n"); - return PTR_ERR(modes); + return -EINVAL; } fbi.info.modes.modes = modes->modes; diff --git a/dts/Bindings/Makefile b/dts/Bindings/Makefile index 8a2774b583..6b0dfd5c17 100644 --- a/dts/Bindings/Makefile +++ b/dts/Bindings/Makefile @@ -25,7 +25,7 @@ DT_DOCS = $(shell \ DT_SCHEMA_FILES ?= $(addprefix $(src)/,$(DT_DOCS)) extra-y += $(patsubst $(src)/%.yaml,%.example.dts, $(DT_SCHEMA_FILES)) -extra-y += $(patsubst $(src)/%.yaml,%.example.dtb, $(DT_SCHEMA_FILES)) +extra-y += $(patsubst $(src)/%.yaml,%.example.dt.yaml, $(DT_SCHEMA_FILES)) $(obj)/$(DT_TMP_SCHEMA): $(DT_SCHEMA_FILES) FORCE $(call if_changed,mk_schema) diff --git a/dts/Bindings/arm/al,alpine.txt b/dts/Bindings/arm/al,alpine.txt deleted file mode 100644 index d00debe2e8..0000000000 --- a/dts/Bindings/arm/al,alpine.txt +++ /dev/null @@ -1,16 +0,0 @@ -Annapurna Labs Alpine Platform Device Tree Bindings ---------------------------------------------------------------- - -Boards in the Alpine family shall have the following properties: - -* Required root node properties: -compatible: must contain "al,alpine" - -* Example: - -/ { - model = "Annapurna Labs Alpine Dev Board"; - compatible = "al,alpine"; - - ... -} diff --git a/dts/Bindings/arm/al,alpine.yaml b/dts/Bindings/arm/al,alpine.yaml new file mode 100644 index 0000000000..a70dff277e --- /dev/null +++ b/dts/Bindings/arm/al,alpine.yaml @@ -0,0 +1,21 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/al,alpine.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Annapurna Labs Alpine Platform Device Tree Bindings + +maintainers: + - Tsahee Zidenberg <tsahee@annapurnalabs.com> + - Antoine Tenart <antoine.tenart@bootlin.com> + +properties: + compatible: + items: + - const: al,alpine + model: + items: + - const: "Annapurna Labs Alpine Dev Board" + +... diff --git a/dts/Bindings/arm/amlogic.txt b/dts/Bindings/arm/amlogic.txt deleted file mode 100644 index 061f7b98a0..0000000000 --- a/dts/Bindings/arm/amlogic.txt +++ /dev/null @@ -1,142 +0,0 @@ -Amlogic MesonX device tree bindings -------------------------------------------- - -Work in progress statement: - -Device tree files and bindings applying to Amlogic SoCs and boards are -considered "unstable". Any Amlogic device tree binding may change at -any time. Be sure to use a device tree binary and a kernel image -generated from the same source tree. - -Please refer to Documentation/devicetree/bindings/ABI.txt for a definition of a -stable binding/ABI. - ---------------------------------------------------------------- - -Boards with the Amlogic Meson6 SoC shall have the following properties: - Required root node property: - compatible: "amlogic,meson6" - -Boards with the Amlogic Meson8 SoC shall have the following properties: - Required root node property: - compatible: "amlogic,meson8"; - -Boards with the Amlogic Meson8b SoC shall have the following properties: - Required root node property: - compatible: "amlogic,meson8b"; - -Boards with the Amlogic Meson8m2 SoC shall have the following properties: - Required root node property: - compatible: "amlogic,meson8m2"; - -Boards with the Amlogic Meson GXBaby SoC shall have the following properties: - Required root node property: - compatible: "amlogic,meson-gxbb"; - -Boards with the Amlogic Meson GXL S905X SoC shall have the following properties: - Required root node property: - compatible: "amlogic,s905x", "amlogic,meson-gxl"; - -Boards with the Amlogic Meson GXL S905D SoC shall have the following properties: - Required root node property: - compatible: "amlogic,s905d", "amlogic,meson-gxl"; - -Boards with the Amlogic Meson GXL S805X SoC shall have the following properties: - Required root node property: - compatible: "amlogic,s805x", "amlogic,meson-gxl"; - -Boards with the Amlogic Meson GXL S905W SoC shall have the following properties: - Required root node property: - compatible: "amlogic,s905w", "amlogic,meson-gxl"; - -Boards with the Amlogic Meson GXM S912 SoC shall have the following properties: - Required root node property: - compatible: "amlogic,s912", "amlogic,meson-gxm"; - -Boards with the Amlogic Meson AXG A113D SoC shall have the following properties: - Required root node property: - compatible: "amlogic,a113d", "amlogic,meson-axg"; - -Boards with the Amlogic Meson G12A S905D2 SoC shall have the following properties: - Required root node property: - compatible: "amlogic,g12a"; - -Board compatible values (alphabetically, grouped by SoC): - - - "geniatech,atv1200" (Meson6) - - - "minix,neo-x8" (Meson8) - - - "endless,ec100" (Meson8b) - - "hardkernel,odroid-c1" (Meson8b) - - "tronfy,mxq" (Meson8b) - - - "tronsmart,mxiii-plus" (Meson8m2) - - - "amlogic,p200" (Meson gxbb) - - "amlogic,p201" (Meson gxbb) - - "friendlyarm,nanopi-k2" (Meson gxbb) - - "hardkernel,odroid-c2" (Meson gxbb) - - "nexbox,a95x" (Meson gxbb or Meson gxl s905x) - - "tronsmart,vega-s95-pro", "tronsmart,vega-s95" (Meson gxbb) - - "tronsmart,vega-s95-meta", "tronsmart,vega-s95" (Meson gxbb) - - "tronsmart,vega-s95-telos", "tronsmart,vega-s95" (Meson gxbb) - - "wetek,hub" (Meson gxbb) - - "wetek,play2" (Meson gxbb) - - - "amlogic,p212" (Meson gxl s905x) - - "hwacom,amazetv" (Meson gxl s905x) - - "khadas,vim" (Meson gxl s905x) - - "libretech,cc" (Meson gxl s905x) - - - "amlogic,p230" (Meson gxl s905d) - - "amlogic,p231" (Meson gxl s905d) - - "phicomm,n1" (Meson gxl s905d) - - - "amlogic,p241" (Meson gxl s805x) - - "libretech,aml-s805x-ac" (Meson gxl s805x) - - - "amlogic,p281" (Meson gxl s905w) - - "oranth,tx3-mini" (Meson gxl s905w) - - - "amlogic,q200" (Meson gxm s912) - - "amlogic,q201" (Meson gxm s912) - - "khadas,vim2" (Meson gxm s912) - - "kingnovel,r-box-pro" (Meson gxm S912) - - "nexbox,a1" (Meson gxm s912) - - "tronsmart,vega-s96" (Meson gxm s912) - - - "amlogic,s400" (Meson axg a113d) - - - "amlogic,u200" (Meson g12a s905d2) - - "amediatech,x96-max" (Meson g12a s905x2) - - "seirobotics,sei510" (Meson g12a s905x2) - -Amlogic Meson Firmware registers Interface ------------------------------------------- - -The Meson SoCs have a register bank with status and data shared with the -secure firmware. - -Required properties: - - compatible: For Meson GX SoCs, must be "amlogic,meson-gx-ao-secure", "syscon" - -Properties should indentify components of this register interface : - -Meson GX SoC Information ------------------------- -A firmware register encodes the SoC type, package and revision information on -the Meson GX SoCs. -If present, the following property should be added : - -Optional properties: - - amlogic,has-chip-id: If present, the interface gives the current SoC version. - -Example -------- - -ao-secure@140 { - compatible = "amlogic,meson-gx-ao-secure", "syscon"; - reg = <0x0 0x140 0x0 0x140>; - amlogic,has-chip-id; -}; diff --git a/dts/Bindings/arm/amlogic.yaml b/dts/Bindings/arm/amlogic.yaml new file mode 100644 index 0000000000..325c6fd356 --- /dev/null +++ b/dts/Bindings/arm/amlogic.yaml @@ -0,0 +1,144 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/amlogic.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Amlogic MesonX device tree bindings + +maintainers: + - Kevin Hilman <khilman@baylibre.com> + +description: |+ + Work in progress statement: + + Device tree files and bindings applying to Amlogic SoCs and boards are + considered "unstable". Any Amlogic device tree binding may change at + any time. Be sure to use a device tree binary and a kernel image + generated from the same source tree. + + Please refer to Documentation/devicetree/bindings/ABI.txt for a definition of a + stable binding/ABI. + +properties: + $nodename: + const: '/' + compatible: + oneOf: + - description: Boards with the Amlogic Meson6 SoC + items: + - enum: + - geniatech,atv1200 + - const: amlogic,meson6 + + - description: Boards with the Amlogic Meson8 SoC + items: + - enum: + - minix,neo-x8 + - const: amlogic,meson8 + + - description: Boards with the Amlogic Meson8m2 SoC + items: + - enum: + - tronsmart,mxiii-plus + - const: amlogic,meson8m2 + + - description: Boards with the Amlogic Meson8b SoC + items: + - enum: + - endless,ec100 + - hardkernel,odroid-c1 + - tronfy,mxq + - const: amlogic,meson8b + + - description: Boards with the Amlogic Meson GXBaby SoC + items: + - enum: + - amlogic,p200 + - amlogic,p201 + - friendlyarm,nanopi-k2 + - hardkernel,odroid-c2 + - nexbox,a95x + - wetek,hub + - wetek,play2 + - const: amlogic,meson-gxbb + + - description: Tronsmart Vega S95 devices + items: + - enum: + - tronsmart,vega-s95-pro + - tronsmart,vega-s95-meta + - tronsmart,vega-s95-telos + - const: tronsmart,vega-s95 + - const: amlogic,meson-gxbb + + - description: Boards with the Amlogic Meson GXL S805X SoC + items: + - enum: + - amlogic,p241 + - libretech,aml-s805x-ac + - const: amlogic,s805x + - const: amlogic,meson-gxl + + - description: Boards with the Amlogic Meson GXL S905W SoC + items: + - enum: + - amlogic,p281 + - oranth,tx3-mini + - const: amlogic,s905w + - const: amlogic,meson-gxl + + - description: Boards with the Amlogic Meson GXL S905X SoC + items: + - enum: + - amediatech,x96-max + - amlogic,p212 + - hwacom,amazetv + - khadas,vim + - libretech,cc + - nexbox,a95x + - seirobotics,sei510 + - const: amlogic,s905x + - const: amlogic,meson-gxl + + - description: Boards with the Amlogic Meson GXL S905D SoC + items: + - enum: + - amlogic,p230 + - amlogic,p231 + - phicomm,n1 + - const: amlogic,s905d + - const: amlogic,meson-gxl + + - description: Boards with the Amlogic Meson GXM S912 SoC + items: + - enum: + - amlogic,q200 + - amlogic,q201 + - khadas,vim2 + - kingnovel,r-box-pro + - nexbox,a1 + - tronsmart,vega-s96 + - const: amlogic,s912 + - const: amlogic,meson-gxm + + - description: Boards with the Amlogic Meson AXG A113D SoC + items: + - enum: + - amlogic,s400 + - const: amlogic,a113d + - const: amlogic,meson-axg + + - description: Boards with the Amlogic Meson G12A S905D2 SoC + items: + - enum: + - amlogic,u200 + - const: amlogic,g12a + + - description: Boards with the Amlogic Meson G12B S922X SoC + items: + - enum: + - hardkernel,odroid-n2 + - const: amlogic,g12b + +... diff --git a/dts/Bindings/arm/amlogic/amlogic,meson-gx-ao-secure.txt b/dts/Bindings/arm/amlogic/amlogic,meson-gx-ao-secure.txt new file mode 100644 index 0000000000..c67d9f48fb --- /dev/null +++ b/dts/Bindings/arm/amlogic/amlogic,meson-gx-ao-secure.txt @@ -0,0 +1,28 @@ +Amlogic Meson Firmware registers Interface +------------------------------------------ + +The Meson SoCs have a register bank with status and data shared with the +secure firmware. + +Required properties: + - compatible: For Meson GX SoCs, must be "amlogic,meson-gx-ao-secure", "syscon" + +Properties should indentify components of this register interface : + +Meson GX SoC Information +------------------------ +A firmware register encodes the SoC type, package and revision information on +the Meson GX SoCs. +If present, the following property should be added : + +Optional properties: + - amlogic,has-chip-id: If present, the interface gives the current SoC version. + +Example +------- + +ao-secure@140 { + compatible = "amlogic,meson-gx-ao-secure", "syscon"; + reg = <0x0 0x140 0x0 0x140>; + amlogic,has-chip-id; +}; diff --git a/dts/Bindings/arm/arm,scmi.txt b/dts/Bindings/arm/arm,scmi.txt index 5f3719ab70..317a2fc366 100644 --- a/dts/Bindings/arm/arm,scmi.txt +++ b/dts/Bindings/arm/arm,scmi.txt @@ -6,7 +6,7 @@ that are provided by the hardware platform it is running on, including power and performance functions. This binding is intended to define the interface the firmware implementing -the SCMI as described in ARM document number ARM DUI 0922B ("ARM System Control +the SCMI as described in ARM document number ARM DEN 0056A ("ARM System Control and Management Interface Platform Design Document")[0] provide for OSPM in the device tree. diff --git a/dts/Bindings/arm/arm-boards b/dts/Bindings/arm/arm-boards index abff8d834a..6758ece324 100644 --- a/dts/Bindings/arm/arm-boards +++ b/dts/Bindings/arm/arm-boards @@ -197,7 +197,7 @@ Required nodes: The description for the board must include: - a "psci" node describing the boot method used for the secondary CPUs. A detailed description of the bindings used for "psci" nodes is present - in the psci.txt file. + in the psci.yaml file. - a "cpus" node describing the available cores and their associated "enable-method"s. For more details see cpus.txt file. diff --git a/dts/Bindings/arm/atmel-at91.txt b/dts/Bindings/arm/atmel-at91.txt deleted file mode 100644 index 99dee23c74..0000000000 --- a/dts/Bindings/arm/atmel-at91.txt +++ /dev/null @@ -1,73 +0,0 @@ -Atmel AT91 device tree bindings. -================================ - -Boards with a SoC of the Atmel AT91 or SMART family shall have the following -properties: - -Required root node properties: -compatible: must be one of: - * "atmel,at91rm9200" - - * "atmel,at91sam9" for SoCs using an ARM926EJ-S core, shall be extended with - the specific SoC family or compatible: - o "atmel,at91sam9260" - o "atmel,at91sam9261" - o "atmel,at91sam9263" - o "atmel,at91sam9x5" for the 5 series, shall be extended with the specific - SoC compatible: - - "atmel,at91sam9g15" - - "atmel,at91sam9g25" - - "atmel,at91sam9g35" - - "atmel,at91sam9x25" - - "atmel,at91sam9x35" - o "atmel,at91sam9g20" - o "atmel,at91sam9g45" - o "atmel,at91sam9n12" - o "atmel,at91sam9rl" - o "atmel,at91sam9xe" - o "microchip,sam9x60" - * "atmel,sama5" for SoCs using a Cortex-A5, shall be extended with the specific - SoC family: - o "atmel,sama5d2" shall be extended with the specific SoC compatible: - - "atmel,sama5d27" - o "atmel,sama5d3" shall be extended with the specific SoC compatible: - - "atmel,sama5d31" - - "atmel,sama5d33" - - "atmel,sama5d34" - - "atmel,sama5d35" - - "atmel,sama5d36" - o "atmel,sama5d4" shall be extended with the specific SoC compatible: - - "atmel,sama5d41" - - "atmel,sama5d42" - - "atmel,sama5d43" - - "atmel,sama5d44" - - * "atmel,samv7" for MCUs using a Cortex-M7, shall be extended with the specific - SoC family: - o "atmel,sams70" shall be extended with the specific MCU compatible: - - "atmel,sams70j19" - - "atmel,sams70j20" - - "atmel,sams70j21" - - "atmel,sams70n19" - - "atmel,sams70n20" - - "atmel,sams70n21" - - "atmel,sams70q19" - - "atmel,sams70q20" - - "atmel,sams70q21" - o "atmel,samv70" shall be extended with the specific MCU compatible: - - "atmel,samv70j19" - - "atmel,samv70j20" - - "atmel,samv70n19" - - "atmel,samv70n20" - - "atmel,samv70q19" - - "atmel,samv70q20" - o "atmel,samv71" shall be extended with the specific MCU compatible: - - "atmel,samv71j19" - - "atmel,samv71j20" - - "atmel,samv71j21" - - "atmel,samv71n19" - - "atmel,samv71n20" - - "atmel,samv71n21" - - "atmel,samv71q19" - - "atmel,samv71q20" - - "atmel,samv71q21" diff --git a/dts/Bindings/arm/atmel-at91.yaml b/dts/Bindings/arm/atmel-at91.yaml new file mode 100644 index 0000000000..6e168abcd4 --- /dev/null +++ b/dts/Bindings/arm/atmel-at91.yaml @@ -0,0 +1,134 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/atmel-at91.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Atmel AT91 device tree bindings. + +maintainers: + - Alexandre Belloni <alexandre.belloni@bootlin.com> + - Ludovic Desroches <ludovic.desroches@microchip.com> + +description: | + Boards with a SoC of the Atmel AT91 or SMART family shall have the following + +properties: + $nodename: + const: '/' + compatible: + oneOf: + - items: + - const: atmel,at91rm9200 + - items: + - enum: + - olimex,sam9-l9260 + - enum: + - atmel,at91sam9260 + - atmel,at91sam9261 + - atmel,at91sam9263 + - atmel,at91sam9g20 + - atmel,at91sam9g45 + - atmel,at91sam9n12 + - atmel,at91sam9rl + - atmel,at91sam9xe + - atmel,at91sam9x60 + - const: atmel,at91sam9 + + - items: + - enum: + - atmel,at91sam9g15 + - atmel,at91sam9g25 + - atmel,at91sam9g35 + - atmel,at91sam9x25 + - atmel,at91sam9x35 + - const: atmel,at91sam9x5 + - const: atmel,at91sam9 + + - items: + - const: atmel,sama5d27 + - const: atmel,sama5d2 + - const: atmel,sama5 + + - description: Nattis v2 board with Natte v2 power board + items: + - const: axentia,nattis-2 + - const: axentia,natte-2 + - const: axentia,linea + - const: atmel,sama5d31 + - const: atmel,sama5d3 + - const: atmel,sama5 + + - description: TSE-850 v3 board + items: + - const: axentia,tse850v3 + - const: axentia,linea + - const: atmel,sama5d31 + - const: atmel,sama5d3 + - const: atmel,sama5 + + - items: + - const: axentia,linea + - const: atmel,sama5d31 + - const: atmel,sama5d3 + - const: atmel,sama5 + + - items: + - enum: + - atmel,sama5d31 + - atmel,sama5d33 + - atmel,sama5d34 + - atmel,sama5d35 + - atmel,sama5d36 + - const: atmel,sama5d3 + - const: atmel,sama5 + + - items: + - enum: + - atmel,sama5d41 + - atmel,sama5d42 + - atmel,sama5d43 + - atmel,sama5d44 + - const: atmel,sama5d4 + - const: atmel,sama5 + + - items: + - enum: + - atmel,sams70j19 + - atmel,sams70j20 + - atmel,sams70j21 + - atmel,sams70n19 + - atmel,sams70n20 + - atmel,sams70n21 + - atmel,sams70q19 + - atmel,sams70q20 + - atmel,sams70q21 + - const: atmel,sams70 + - const: atmel,samv7 + + - items: + - enum: + - atmel,samv70j19 + - atmel,samv70j20 + - atmel,samv70n19 + - atmel,samv70n20 + - atmel,samv70q19 + - atmel,samv70q20 + - const: atmel,samv70 + - const: atmel,samv7 + + - items: + - enum: + - atmel,samv71j19 + - atmel,samv71j20 + - atmel,samv71j21 + - atmel,samv71n19 + - atmel,samv71n20 + - atmel,samv71n21 + - atmel,samv71q19 + - atmel,samv71q20 + - atmel,samv71q21 + - const: atmel,samv71 + - const: atmel,samv7 + +... diff --git a/dts/Bindings/arm/axxia.txt b/dts/Bindings/arm/axxia.txt deleted file mode 100644 index 7b4ef9c076..0000000000 --- a/dts/Bindings/arm/axxia.txt +++ /dev/null @@ -1,12 +0,0 @@ -Axxia AXM55xx device tree bindings - -Boards using the AXM55xx SoC need to have the following properties: - -Required root node property: - - - compatible = "lsi,axm5516" - -Boards: - - LSI AXM5516 Validation board (Amarillo) - compatible = "lsi,axm5516-amarillo", "lsi,axm5516" diff --git a/dts/Bindings/arm/axxia.yaml b/dts/Bindings/arm/axxia.yaml new file mode 100644 index 0000000000..98780a569f --- /dev/null +++ b/dts/Bindings/arm/axxia.yaml @@ -0,0 +1,19 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/axxia.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Axxia AXM55xx device tree bindings + +maintainers: + - Anders Berg <anders.berg@lsi.com> + +properties: + compatible: + description: LSI AXM5516 Validation board (Amarillo) + items: + - const: lsi,axm5516-amarillo + - const: lsi,axm5516 + +... diff --git a/dts/Bindings/arm/coresight-cpu-debug.txt b/dts/Bindings/arm/coresight-cpu-debug.txt index 298291211e..f1de3247c1 100644 --- a/dts/Bindings/arm/coresight-cpu-debug.txt +++ b/dts/Bindings/arm/coresight-cpu-debug.txt @@ -26,8 +26,8 @@ Required properties: processor core is clocked by the internal CPU clock, so it is enabled with CPU clock by default. -- cpu : the CPU phandle the debug module is affined to. When omitted - the module is considered to belong to CPU0. +- cpu : the CPU phandle the debug module is affined to. Do not assume it + to default to CPU0 if omitted. Optional properties: diff --git a/dts/Bindings/arm/coresight.txt b/dts/Bindings/arm/coresight.txt index 8a88ddebc1..fcc3bacfd8 100644 --- a/dts/Bindings/arm/coresight.txt +++ b/dts/Bindings/arm/coresight.txt @@ -59,6 +59,11 @@ its hardware characteristcs. * port or ports: see "Graph bindings for Coresight" below. +* Additional required property for Embedded Trace Macrocell (version 3.x and + version 4.x): + * cpu: the cpu phandle this ETM/PTM is affined to. Do not + assume it to default to CPU0 if omitted. + * Additional required properties for System Trace Macrocells (STM): * reg: along with the physical base address and length of the register set as described above, another entry is required to describe the @@ -87,9 +92,6 @@ its hardware characteristcs. * arm,cp14: must be present if the system accesses ETM/PTM management registers via co-processor 14. - * cpu: the cpu phandle this ETM/PTM is affined to. When omitted the - source is considered to belong to CPU0. - * Optional property for TMC: * arm,buffer-size: size of contiguous buffer space for TMC ETR diff --git a/dts/Bindings/arm/cpus.yaml b/dts/Bindings/arm/cpus.yaml index 591bbd012d..aa40b074b8 100644 --- a/dts/Bindings/arm/cpus.yaml +++ b/dts/Bindings/arm/cpus.yaml @@ -39,281 +39,242 @@ description: |+ described below. properties: - $nodename: - const: cpus - description: Container of cpu nodes - - '#address-cells': - enum: [1, 2] + reg: + maxItems: 1 description: | - Definition depends on ARM architecture version and configuration: + Usage and definition depend on ARM architecture version and + configuration: On uniprocessor ARM architectures previous to v7 - value must be 1, to enable a simple enumeration - scheme for processors that do not have a HW CPU - identification register. - On 32-bit ARM 11 MPcore, ARM v7 or later systems - value must be 1, that corresponds to CPUID/MPIDR - registers sizes. - On ARM v8 64-bit systems value should be set to 2, - that corresponds to the MPIDR_EL1 register size. - If MPIDR_EL1[63:32] value is equal to 0 on all CPUs - in the system, #address-cells can be set to 1, since - MPIDR_EL1[63:32] bits are not used for CPUs - identification. - - '#size-cells': - const: 0 - -patternProperties: - '^cpu@[0-9a-f]+$': - type: object - properties: - device_type: - const: cpu - - reg: - maxItems: 1 - description: | - Usage and definition depend on ARM architecture version and - configuration: - - On uniprocessor ARM architectures previous to v7 - this property is required and must be set to 0. - - On ARM 11 MPcore based systems this property is - required and matches the CPUID[11:0] register bits. - - Bits [11:0] in the reg cell must be set to - bits [11:0] in CPU ID register. - - All other bits in the reg cell must be set to 0. - - On 32-bit ARM v7 or later systems this property is - required and matches the CPU MPIDR[23:0] register - bits. - - Bits [23:0] in the reg cell must be set to - bits [23:0] in MPIDR. - - All other bits in the reg cell must be set to 0. - - On ARM v8 64-bit systems this property is required - and matches the MPIDR_EL1 register affinity bits. + this property is required and must be set to 0. + + On ARM 11 MPcore based systems this property is + required and matches the CPUID[11:0] register bits. + + Bits [11:0] in the reg cell must be set to + bits [11:0] in CPU ID register. + + All other bits in the reg cell must be set to 0. + + On 32-bit ARM v7 or later systems this property is + required and matches the CPU MPIDR[23:0] register + bits. + + Bits [23:0] in the reg cell must be set to + bits [23:0] in MPIDR. + + All other bits in the reg cell must be set to 0. + + On ARM v8 64-bit systems this property is required + and matches the MPIDR_EL1 register affinity bits. + + * If cpus node's #address-cells property is set to 2 + + The first reg cell bits [7:0] must be set to + bits [39:32] of MPIDR_EL1. + + The second reg cell bits [23:0] must be set to + bits [23:0] of MPIDR_EL1. + + * If cpus node's #address-cells property is set to 1 + + The reg cell bits [23:0] must be set to bits [23:0] + of MPIDR_EL1. + + All other bits in the reg cells must be set to 0. + + compatible: + enum: + - arm,arm710t + - arm,arm720t + - arm,arm740t + - arm,arm7ej-s + - arm,arm7tdmi + - arm,arm7tdmi-s + - arm,arm9es + - arm,arm9ej-s + - arm,arm920t + - arm,arm922t + - arm,arm925 + - arm,arm926e-s + - arm,arm926ej-s + - arm,arm940t + - arm,arm946e-s + - arm,arm966e-s + - arm,arm968e-s + - arm,arm9tdmi + - arm,arm1020e + - arm,arm1020t + - arm,arm1022e + - arm,arm1026ej-s + - arm,arm1136j-s + - arm,arm1136jf-s + - arm,arm1156t2-s + - arm,arm1156t2f-s + - arm,arm1176jzf + - arm,arm1176jz-s + - arm,arm1176jzf-s + - arm,arm11mpcore + - arm,armv8 # Only for s/w models + - arm,cortex-a5 + - arm,cortex-a7 + - arm,cortex-a8 + - arm,cortex-a9 + - arm,cortex-a12 + - arm,cortex-a15 + - arm,cortex-a17 + - arm,cortex-a53 + - arm,cortex-a57 + - arm,cortex-a72 + - arm,cortex-a73 + - arm,cortex-m0 + - arm,cortex-m0+ + - arm,cortex-m1 + - arm,cortex-m3 + - arm,cortex-m4 + - arm,cortex-r4 + - arm,cortex-r5 + - arm,cortex-r7 + - brcm,brahma-b15 + - brcm,brahma-b53 + - brcm,vulcan + - cavium,thunder + - cavium,thunder2 + - faraday,fa526 + - intel,sa110 + - intel,sa1100 + - marvell,feroceon + - marvell,mohawk + - marvell,pj4a + - marvell,pj4b + - marvell,sheeva-v5 + - marvell,sheeva-v7 + - nvidia,tegra132-denver + - nvidia,tegra186-denver + - nvidia,tegra194-carmel + - qcom,krait + - qcom,kryo + - qcom,kryo385 + - qcom,scorpion + + enable-method: + allOf: + - $ref: '/schemas/types.yaml#/definitions/string' + - oneOf: + # On ARM v8 64-bit this property is required + - enum: + - psci + - spin-table + # On ARM 32-bit systems this property is optional + - enum: + - actions,s500-smp + - allwinner,sun6i-a31 + - allwinner,sun8i-a23 + - allwinner,sun9i-a80-smp + - allwinner,sun8i-a83t-smp + - amlogic,meson8-smp + - amlogic,meson8b-smp + - arm,realview-smp + - brcm,bcm11351-cpu-method + - brcm,bcm23550 + - brcm,bcm2836-smp + - brcm,bcm63138 + - brcm,bcm-nsp-smp + - brcm,brahma-b15 + - marvell,armada-375-smp + - marvell,armada-380-smp + - marvell,armada-390-smp + - marvell,armada-xp-smp + - marvell,98dx3236-smp + - mediatek,mt6589-smp + - mediatek,mt81xx-tz-smp + - qcom,gcc-msm8660 + - qcom,kpss-acc-v1 + - qcom,kpss-acc-v2 + - renesas,apmu + - renesas,r9a06g032-smp + - rockchip,rk3036-smp + - rockchip,rk3066-smp + - socionext,milbeaut-m10v-smp + - ste,dbx500-smp + + cpu-release-addr: + $ref: '/schemas/types.yaml#/definitions/uint64' + + description: + Required for systems that have an "enable-method" + property value of "spin-table". + On ARM v8 64-bit systems must be a two cell + property identifying a 64-bit zero-initialised + memory location. + + cpu-idle-states: + $ref: '/schemas/types.yaml#/definitions/phandle-array' + description: | + List of phandles to idle state nodes supported + by this cpu (see ./idle-states.txt). + + capacity-dmips-mhz: + $ref: '/schemas/types.yaml#/definitions/uint32' + description: + u32 value representing CPU capacity (see ./cpu-capacity.txt) in + DMIPS/MHz, relative to highest capacity-dmips-mhz + in the system. + + dynamic-power-coefficient: + $ref: '/schemas/types.yaml#/definitions/uint32' + description: + A u32 value that represents the running time dynamic + power coefficient in units of uW/MHz/V^2. The + coefficient can either be calculated from power + measurements or derived by analysis. + + The dynamic power consumption of the CPU is + proportional to the square of the Voltage (V) and + the clock frequency (f). The coefficient is used to + calculate the dynamic power as below - + + Pdyn = dynamic-power-coefficient * V^2 * f + + where voltage is in V, frequency is in MHz. + + qcom,saw: + $ref: '/schemas/types.yaml#/definitions/phandle' + description: | + Specifies the SAW* node associated with this CPU. - * If cpus node's #address-cells property is set to 2 + Required for systems that have an "enable-method" property + value of "qcom,kpss-acc-v1" or "qcom,kpss-acc-v2" - The first reg cell bits [7:0] must be set to - bits [39:32] of MPIDR_EL1. + * arm/msm/qcom,saw2.txt - The second reg cell bits [23:0] must be set to - bits [23:0] of MPIDR_EL1. + qcom,acc: + $ref: '/schemas/types.yaml#/definitions/phandle' + description: | + Specifies the ACC* node associated with this CPU. - * If cpus node's #address-cells property is set to 1 + Required for systems that have an "enable-method" property + value of "qcom,kpss-acc-v1" or "qcom,kpss-acc-v2" - The reg cell bits [23:0] must be set to bits [23:0] - of MPIDR_EL1. + * arm/msm/qcom,kpss-acc.txt - All other bits in the reg cells must be set to 0. + rockchip,pmu: + $ref: '/schemas/types.yaml#/definitions/phandle' + description: | + Specifies the syscon node controlling the cpu core power domains. - compatible: - items: - - enum: - - arm,arm710t - - arm,arm720t - - arm,arm740t - - arm,arm7ej-s - - arm,arm7tdmi - - arm,arm7tdmi-s - - arm,arm9es - - arm,arm9ej-s - - arm,arm920t - - arm,arm922t - - arm,arm925 - - arm,arm926e-s - - arm,arm926ej-s - - arm,arm940t - - arm,arm946e-s - - arm,arm966e-s - - arm,arm968e-s - - arm,arm9tdmi - - arm,arm1020e - - arm,arm1020t - - arm,arm1022e - - arm,arm1026ej-s - - arm,arm1136j-s - - arm,arm1136jf-s - - arm,arm1156t2-s - - arm,arm1156t2f-s - - arm,arm1176jzf - - arm,arm1176jz-s - - arm,arm1176jzf-s - - arm,arm11mpcore - - arm,armv8 # Only for s/w models - - arm,cortex-a5 - - arm,cortex-a7 - - arm,cortex-a8 - - arm,cortex-a9 - - arm,cortex-a12 - - arm,cortex-a15 - - arm,cortex-a17 - - arm,cortex-a53 - - arm,cortex-a57 - - arm,cortex-a72 - - arm,cortex-a73 - - arm,cortex-m0 - - arm,cortex-m0+ - - arm,cortex-m1 - - arm,cortex-m3 - - arm,cortex-m4 - - arm,cortex-r4 - - arm,cortex-r5 - - arm,cortex-r7 - - brcm,brahma-b15 - - brcm,brahma-b53 - - brcm,vulcan - - cavium,thunder - - cavium,thunder2 - - faraday,fa526 - - intel,sa110 - - intel,sa1100 - - marvell,feroceon - - marvell,mohawk - - marvell,pj4a - - marvell,pj4b - - marvell,sheeva-v5 - - marvell,sheeva-v7 - - nvidia,tegra132-denver - - nvidia,tegra186-denver - - nvidia,tegra194-carmel - - qcom,krait - - qcom,kryo - - qcom,kryo385 - - qcom,scorpion - - enable-method: - allOf: - - $ref: '/schemas/types.yaml#/definitions/string' - - oneOf: - # On ARM v8 64-bit this property is required - - enum: - - psci - - spin-table - # On ARM 32-bit systems this property is optional - - enum: - - actions,s500-smp - - allwinner,sun6i-a31 - - allwinner,sun8i-a23 - - allwinner,sun9i-a80-smp - - allwinner,sun8i-a83t-smp - - amlogic,meson8-smp - - amlogic,meson8b-smp - - arm,realview-smp - - brcm,bcm11351-cpu-method - - brcm,bcm23550 - - brcm,bcm2836-smp - - brcm,bcm63138 - - brcm,bcm-nsp-smp - - brcm,brahma-b15 - - marvell,armada-375-smp - - marvell,armada-380-smp - - marvell,armada-390-smp - - marvell,armada-xp-smp - - marvell,98dx3236-smp - - mediatek,mt6589-smp - - mediatek,mt81xx-tz-smp - - qcom,gcc-msm8660 - - qcom,kpss-acc-v1 - - qcom,kpss-acc-v2 - - renesas,apmu - - renesas,r9a06g032-smp - - rockchip,rk3036-smp - - rockchip,rk3066-smp - - socionext,milbeaut-m10v-smp - - ste,dbx500-smp - - cpu-release-addr: - $ref: '/schemas/types.yaml#/definitions/uint64' - - description: - Required for systems that have an "enable-method" - property value of "spin-table". - On ARM v8 64-bit systems must be a two cell - property identifying a 64-bit zero-initialised - memory location. - - cpu-idle-states: - $ref: '/schemas/types.yaml#/definitions/phandle-array' - description: | - List of phandles to idle state nodes supported - by this cpu (see ./idle-states.txt). - - capacity-dmips-mhz: - $ref: '/schemas/types.yaml#/definitions/uint32' - description: - u32 value representing CPU capacity (see ./cpu-capacity.txt) in - DMIPS/MHz, relative to highest capacity-dmips-mhz - in the system. - - dynamic-power-coefficient: - $ref: '/schemas/types.yaml#/definitions/uint32' - description: - A u32 value that represents the running time dynamic - power coefficient in units of uW/MHz/V^2. The - coefficient can either be calculated from power - measurements or derived by analysis. - - The dynamic power consumption of the CPU is - proportional to the square of the Voltage (V) and - the clock frequency (f). The coefficient is used to - calculate the dynamic power as below - - - Pdyn = dynamic-power-coefficient * V^2 * f - - where voltage is in V, frequency is in MHz. - - qcom,saw: - $ref: '/schemas/types.yaml#/definitions/phandle' - description: | - Specifies the SAW* node associated with this CPU. - - Required for systems that have an "enable-method" property - value of "qcom,kpss-acc-v1" or "qcom,kpss-acc-v2" - - * arm/msm/qcom,saw2.txt - - qcom,acc: - $ref: '/schemas/types.yaml#/definitions/phandle' - description: | - Specifies the ACC* node associated with this CPU. - - Required for systems that have an "enable-method" property - value of "qcom,kpss-acc-v1" or "qcom,kpss-acc-v2" - - * arm/msm/qcom,kpss-acc.txt - - rockchip,pmu: - $ref: '/schemas/types.yaml#/definitions/phandle' - description: | - Specifies the syscon node controlling the cpu core power domains. - - Optional for systems that have an "enable-method" - property value of "rockchip,rk3066-smp" - While optional, it is the preferred way to get access to - the cpu-core power-domains. - - required: - - device_type - - reg - - compatible - - dependencies: - cpu-release-addr: [enable-method] - rockchip,pmu: [enable-method] + Optional for systems that have an "enable-method" + property value of "rockchip,rk3066-smp" + While optional, it is the preferred way to get access to + the cpu-core power-domains. required: - - '#address-cells' - - '#size-cells' + - device_type + - reg + - compatible + +dependencies: + rockchip,pmu: [enable-method] examples: - | diff --git a/dts/Bindings/arm/digicolor.txt b/dts/Bindings/arm/digicolor.txt deleted file mode 100644 index 658553f40b..0000000000 --- a/dts/Bindings/arm/digicolor.txt +++ /dev/null @@ -1,6 +0,0 @@ -Conexant Digicolor Platforms Device Tree Bindings - -Each device tree must specify which Conexant Digicolor SoC it uses. -Must be the following compatible string: - - cnxt,cx92755 diff --git a/dts/Bindings/arm/digicolor.yaml b/dts/Bindings/arm/digicolor.yaml new file mode 100644 index 0000000000..d9c80b827e --- /dev/null +++ b/dts/Bindings/arm/digicolor.yaml @@ -0,0 +1,16 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/digicolor.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Conexant Digicolor Platforms Device Tree Bindings + +maintainers: + - Baruch Siach <baruch@tkos.co.il> + +properties: + compatible: + const: cnxt,cx92755 + +... diff --git a/dts/Bindings/arm/emtrion.txt b/dts/Bindings/arm/emtrion.txt deleted file mode 100644 index 83329aefc4..0000000000 --- a/dts/Bindings/arm/emtrion.txt +++ /dev/null @@ -1,12 +0,0 @@ -Emtrion Devicetree Bindings -=========================== - -emCON Series: -------------- - -Required root node properties - - compatible: - - "emtrion,emcon-mx6", "fsl,imx6q"; : emCON-MX6D or emCON-MX6Q SoM - - "emtrion,emcon-mx6-avari", "fsl,imx6q"; : emCON-MX6D or emCON-MX6Q SoM on Avari Base - - "emtrion,emcon-mx6", "fsl,imx6dl"; : emCON-MX6S or emCON-MX6DL SoM - - "emtrion,emcon-mx6-avari", "fsl,imx6dl"; : emCON-MX6S or emCON-MX6DL SoM on Avari Base diff --git a/dts/Bindings/arm/freescale/fsl,scu.txt b/dts/Bindings/arm/freescale/fsl,scu.txt index 5d7dbabbb7..a575e42f7f 100644 --- a/dts/Bindings/arm/freescale/fsl,scu.txt +++ b/dts/Bindings/arm/freescale/fsl,scu.txt @@ -133,6 +133,28 @@ RTC bindings based on SCU Message Protocol Required properties: - compatible: should be "fsl,imx8qxp-sc-rtc"; +OCOTP bindings based on SCU Message Protocol +------------------------------------------------------------ +Required properties: +- compatible: Should be "fsl,imx8qxp-scu-ocotp" +- #address-cells: Must be 1. Contains byte index +- #size-cells: Must be 1. Contains byte length + +Optional Child nodes: + +- Data cells of ocotp: + Detailed bindings are described in bindings/nvmem/nvmem.txt + +Watchdog bindings based on SCU Message Protocol +------------------------------------------------------------ + +Required properties: +- compatible: should be: + "fsl,imx8qxp-sc-wdt" + followed by "fsl,imx-sc-wdt"; +Optional properties: +- timeout-sec: contains the watchdog timeout in seconds. + Example (imx8qxp): ------------- aliases { @@ -177,6 +199,16 @@ firmware { ... }; + ocotp: imx8qx-ocotp { + compatible = "fsl,imx8qxp-scu-ocotp"; + #address-cells = <1>; + #size-cells = <1>; + + fec_mac0: mac@2c4 { + reg = <0x2c4 8>; + }; + }; + pd: imx8qx-pd { compatible = "fsl,imx8qxp-scu-pd", "fsl,scu-pd"; #power-domain-cells = <1>; @@ -185,6 +217,11 @@ firmware { rtc: rtc { compatible = "fsl,imx8qxp-sc-rtc"; }; + + watchdog { + compatible = "fsl,imx8qxp-sc-wdt", "fsl,imx-sc-wdt"; + timeout-sec = <60>; + }; }; }; diff --git a/dts/Bindings/arm/fsl.yaml b/dts/Bindings/arm/fsl.yaml index 407138ebc0..7294ac36f4 100644 --- a/dts/Bindings/arm/fsl.yaml +++ b/dts/Bindings/arm/fsl.yaml @@ -15,6 +15,13 @@ properties: const: '/' compatible: oneOf: + - description: i.MX1 based Boards + items: + - enum: + - armadeus,imx1-apf9328 + - fsl,imx1ads + - const: fsl,imx1 + - description: i.MX23 based Boards items: - enum: @@ -51,6 +58,25 @@ properties: - const: i2se,duckbill-2 - const: fsl,imx28 + - description: i.MX31 based Boards + items: + - enum: + - buglabs,imx31-bug + - logicpd,imx31-lite + - const: fsl,imx31 + + - description: i.MX35 based Boards + items: + - enum: + - fsl,imx35-pdk + - const: fsl,imx35 + + - description: i.MX35 Eukrea CPUIMX35 Board + items: + - const: eukrea,mbimxsd35-baseboard + - const: eukrea,cpuimx35 + - const: fsl,imx35 + - description: i.MX50 based Boards items: - enum: @@ -80,6 +106,8 @@ properties: - description: i.MX6Q based Boards items: - enum: + - emtrion,emcon-mx6 # emCON-MX6D or emCON-MX6Q SoM + - emtrion,emcon-mx6-avari # emCON-MX6D or emCON-MX6Q SoM on Avari Base - fsl,imx6q-arm2 - fsl,imx6q-sabreauto - fsl,imx6q-sabrelite @@ -99,6 +127,8 @@ properties: items: - enum: - eckelmann,imx6dl-ci4x10 + - emtrion,emcon-mx6 # emCON-MX6S or emCON-MX6DL SoM + - emtrion,emcon-mx6-avari # emCON-MX6S or emCON-MX6DL SoM on Avari Base - fsl,imx6dl-sabreauto # i.MX6 DualLite/Solo SABRE Automotive Board - fsl,imx6dl-sabresd # i.MX6 DualLite SABRE Smart Device Board - technologic,imx6dl-ts4900 @@ -156,6 +186,7 @@ properties: items: - enum: - fsl,imx7d-sdb # i.MX7 SabreSD Board + - novtech,imx7d-meerkat96 # i.MX7 Meerkat96 Board - tq,imx7d-mba7 # i.MX7D TQ MBa7 with TQMa7D SoM - zii,imx7d-rpu2 # ZII RPU2 Board - const: fsl,imx7d @@ -171,12 +202,25 @@ properties: - const: compulab,cl-som-imx7 - const: fsl,imx7d + - description: i.MX7ULP based Boards + items: + - enum: + - fsl,imx7ulp-evk # i.MX7ULP Evaluation Kit + - const: fsl,imx7ulp + - description: i.MX8MM based Boards items: - enum: - fsl,imx8mm-evk # i.MX8MM EVK Board - const: fsl,imx8mm + - description: i.MX8MQ based Boards + items: + - enum: + - fsl,imx8mq-evk # i.MX8MQ EVK Board + - purism,librem5-devkit # Purism Librem5 devkit + - const: fsl,imx8mq + - description: i.MX8QXP based Boards items: - enum: diff --git a/dts/Bindings/arm/idle-states.txt b/dts/Bindings/arm/idle-states.txt index 45730ba60a..2d325bed37 100644 --- a/dts/Bindings/arm/idle-states.txt +++ b/dts/Bindings/arm/idle-states.txt @@ -241,9 +241,13 @@ processor idle states, defined as device tree nodes, are listed. - "psci" # On ARM 32-bit systems this property is optional -The nodes describing the idle states (state) can only be defined within the -idle-states node, any other configuration is considered invalid and therefore -must be ignored. +This assumes that the "enable-method" property is set to "psci" in the cpu +node[6] that is responsible for setting up CPU idle management in the OS +implementation. + +The nodes describing the idle states (state) can only be defined +within the idle-states node, any other configuration is considered invalid +and therefore must be ignored. =========================================== 4 - state node @@ -687,7 +691,7 @@ cpus { Documentation/devicetree/bindings/arm/cpus.yaml [2] ARM Linux Kernel documentation - PSCI bindings - Documentation/devicetree/bindings/arm/psci.txt + Documentation/devicetree/bindings/arm/psci.yaml [3] ARM Server Base System Architecture (SBSA) http://infocenter.arm.com/help/index.jsp @@ -697,3 +701,6 @@ cpus { [5] Devicetree Specification https://www.devicetree.org/specifications/ + +[6] ARM Linux Kernel documentation - Booting AArch64 Linux + Documentation/arm64/booting.rst diff --git a/dts/Bindings/arm/mediatek.txt b/dts/Bindings/arm/mediatek.txt deleted file mode 100644 index 56ac7896d6..0000000000 --- a/dts/Bindings/arm/mediatek.txt +++ /dev/null @@ -1,89 +0,0 @@ -MediaTek SoC based Platforms Device Tree Bindings - -Boards with a MediaTek SoC shall have the following property: - -Required root node property: - -compatible: Must contain one of - "mediatek,mt2701" - "mediatek,mt2712" - "mediatek,mt6580" - "mediatek,mt6589" - "mediatek,mt6592" - "mediatek,mt6755" - "mediatek,mt6765" - "mediatek,mt6795" - "mediatek,mt6797" - "mediatek,mt7622" - "mediatek,mt7623" - "mediatek,mt7629" - "mediatek,mt8127" - "mediatek,mt8135" - "mediatek,mt8173" - "mediatek,mt8183" - - -Supported boards: - -- Evaluation board for MT2701: - Required root node properties: - - compatible = "mediatek,mt2701-evb", "mediatek,mt2701"; -- Evaluation board for MT2712: - Required root node properties: - - compatible = "mediatek,mt2712-evb", "mediatek,mt2712"; -- Evaluation board for MT6580: - Required root node properties: - - compatible = "mediatek,mt6580-evbp1", "mediatek,mt6580"; -- bq Aquaris5 smart phone: - Required root node properties: - - compatible = "mundoreader,bq-aquaris5", "mediatek,mt6589"; -- Evaluation board for MT6592: - Required root node properties: - - compatible = "mediatek,mt6592-evb", "mediatek,mt6592"; -- Evaluation phone for MT6755(Helio P10): - Required root node properties: - - compatible = "mediatek,mt6755-evb", "mediatek,mt6755"; -- Evaluation board for MT6765(Helio P22): - Required root node properties: - - compatible = "mediatek,mt6765-evb", "mediatek,mt6765"; -- Evaluation board for MT6795(Helio X10): - Required root node properties: - - compatible = "mediatek,mt6795-evb", "mediatek,mt6795"; -- Evaluation board for MT6797(Helio X20): - Required root node properties: - - compatible = "mediatek,mt6797-evb", "mediatek,mt6797"; -- Mediatek X20 Development Board: - Required root node properties: - - compatible = "archermind,mt6797-x20-dev", "mediatek,mt6797"; -- Reference board variant 1 for MT7622: - Required root node properties: - - compatible = "mediatek,mt7622-rfb1", "mediatek,mt7622"; -- Bananapi BPI-R64 for MT7622: - Required root node properties: - - compatible = "bananapi,bpi-r64", "mediatek,mt7622"; -- Reference board for MT7623a with eMMC: - Required root node properties: - - compatible = "mediatek,mt7623a-rfb-emmc", "mediatek,mt7623"; -- Reference board for MT7623a with NAND: - Required root node properties: - - compatible = "mediatek,mt7623a-rfb-nand", "mediatek,mt7623"; -- Reference board for MT7623n with eMMC: - Required root node properties: - - compatible = "mediatek,mt7623n-rfb-emmc", "mediatek,mt7623"; -- Bananapi BPI-R2 board: - - compatible = "bananapi,bpi-r2", "mediatek,mt7623"; -- Reference board for MT7629: - Required root node properties: - - compatible = "mediatek,mt7629-rfb", "mediatek,mt7629"; -- MTK mt8127 tablet moose EVB: - Required root node properties: - - compatible = "mediatek,mt8127-moose", "mediatek,mt8127"; -- MTK mt8135 tablet EVB: - Required root node properties: - - compatible = "mediatek,mt8135-evbp1", "mediatek,mt8135"; -- MTK mt8173 tablet EVB: - Required root node properties: - - compatible = "mediatek,mt8173-evb", "mediatek,mt8173"; -- Evaluation board for MT8183: - Required root node properties: - - compatible = "mediatek,mt8183-evb", "mediatek,mt8183"; diff --git a/dts/Bindings/arm/mediatek.yaml b/dts/Bindings/arm/mediatek.yaml new file mode 100644 index 0000000000..a4ad2eb926 --- /dev/null +++ b/dts/Bindings/arm/mediatek.yaml @@ -0,0 +1,91 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/mediatek.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek SoC based Platforms Device Tree Bindings + +maintainers: + - Sean Wang <sean.wang@mediatek.com> + - Matthias Brugger <matthias.bgg@gmail.com> +description: | + Boards with a MediaTek SoC shall have the following properties. + +properties: + $nodename: + const: '/' + compatible: + oneOf: + - items: + - enum: + - mediatek,mt2701-evb + - const: mediatek,mt2701 + + - items: + - enum: + - mediatek,mt2712-evb + - const: mediatek,mt2712 + - items: + - enum: + - mediatek,mt6580-evbp1 + - const: mediatek,mt6580 + - items: + - enum: + - mundoreader,bq-aquaris5 + - const: mediatek,mt6589 + - items: + - enum: + - mediatek,mt6592-evb + - const: mediatek,mt6592 + - items: + - enum: + - mediatek,mt6755-evb + - const: mediatek,mt6755 + - items: + - enum: + - mediatek,mt6765-evb + - const: mediatek,mt6765 + - items: + - enum: + - mediatek,mt6795-evb + - const: mediatek,mt6795 + - items: + - enum: + - archermind,mt6797-x20-dev + - mediatek,mt6797-evb + - const: mediatek,mt6797 + - items: + - enum: + - bananapi,bpi-r64 + - mediatek,mt7622-rfb1 + - const: mediatek,mt7622 + - items: + - enum: + - mediatek,mt7623a-rfb-emmc + - mediatek,mt7623a-rfb-nand + - mediatek,mt7623n-rfb-emmc + - bananapi,bpi-r2 + - const: mediatek,mt7623 + + - items: + - enum: + - mediatek,mt7629-rfb + - const: mediatek,mt7629 + - items: + - enum: + - mediatek,mt8127-moose + - const: mediatek,mt8127 + - items: + - enum: + - mediatek,mt8135-evbp1 + - const: mediatek,mt8135 + - items: + - enum: + - mediatek,mt8173-evb + - const: mediatek,mt8173 + - items: + - enum: + - mediatek,mt8183-evb + - const: mediatek,mt8183 +... diff --git a/dts/Bindings/arm/mediatek/mediatek,audsys.txt b/dts/Bindings/arm/mediatek/mediatek,audsys.txt index f3cef1a6d9..07c9d81346 100644 --- a/dts/Bindings/arm/mediatek/mediatek,audsys.txt +++ b/dts/Bindings/arm/mediatek/mediatek,audsys.txt @@ -10,6 +10,7 @@ Required Properties: - "mediatek,mt7622-audsys", "syscon" - "mediatek,mt7623-audsys", "mediatek,mt2701-audsys", "syscon" - "mediatek,mt8183-audiosys", "syscon" + - "mediatek,mt8516-audsys", "syscon" - #clock-cells: Must be 1 The AUDSYS controller uses the common clk binding from diff --git a/dts/Bindings/arm/mediatek/mediatek,sgmiisys.txt b/dts/Bindings/arm/mediatek/mediatek,sgmiisys.txt index 30cb645c0e..f5518f26a9 100644 --- a/dts/Bindings/arm/mediatek/mediatek,sgmiisys.txt +++ b/dts/Bindings/arm/mediatek/mediatek,sgmiisys.txt @@ -9,6 +9,8 @@ Required Properties: - "mediatek,mt7622-sgmiisys", "syscon" - "mediatek,mt7629-sgmiisys", "syscon" - #clock-cells: Must be 1 +- mediatek,physpeed: Should be one of "auto", "1000" or "2500" to match up + the capability of the target PHY. The SGMIISYS controller uses the common clk binding from Documentation/devicetree/bindings/clock/clock-bindings.txt diff --git a/dts/Bindings/arm/moxart.txt b/dts/Bindings/arm/moxart.txt deleted file mode 100644 index 11087edb06..0000000000 --- a/dts/Bindings/arm/moxart.txt +++ /dev/null @@ -1,12 +0,0 @@ -MOXA ART device tree bindings - -Boards with the MOXA ART SoC shall have the following properties: - -Required root node property: - -compatible = "moxa,moxart"; - -Boards: - -- UC-7112-LX: embedded computer - compatible = "moxa,moxart-uc-7112-lx", "moxa,moxart" diff --git a/dts/Bindings/arm/moxart.yaml b/dts/Bindings/arm/moxart.yaml new file mode 100644 index 0000000000..c068df59fa --- /dev/null +++ b/dts/Bindings/arm/moxart.yaml @@ -0,0 +1,19 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/moxart.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MOXA ART device tree bindings + +maintainers: + - Jonas Jensen <jonas.jensen@gmail.com> + +properties: + compatible: + description: UC-7112-LX embedded computer + items: + - const: moxa,moxart-uc-7112-lx + - const: moxa,moxart + +... diff --git a/dts/Bindings/arm/nxp/lpc32xx.txt b/dts/Bindings/arm/nxp/lpc32xx.txt deleted file mode 100644 index 56ec8ddc4a..0000000000 --- a/dts/Bindings/arm/nxp/lpc32xx.txt +++ /dev/null @@ -1,8 +0,0 @@ -NXP LPC32xx Platforms Device Tree Bindings ------------------------------------------- - -Boards with the NXP LPC32xx SoC shall have the following properties: - -Required root node property: - -compatible: must be "nxp,lpc3220", "nxp,lpc3230", "nxp,lpc3240" or "nxp,lpc3250" diff --git a/dts/Bindings/arm/nxp/lpc32xx.yaml b/dts/Bindings/arm/nxp/lpc32xx.yaml new file mode 100644 index 0000000000..07f39d3eee --- /dev/null +++ b/dts/Bindings/arm/nxp/lpc32xx.yaml @@ -0,0 +1,25 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/nxp/lpc32xx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP LPC32xx Platforms Device Tree Bindings + +maintainers: + - Roland Stigge <stigge@antcom.de> + +properties: + compatible: + oneOf: + - enum: + - nxp,lpc3220 + - nxp,lpc3230 + - nxp,lpc3240 + - items: + - enum: + - ea,ea3250 + - phytec,phy3250 + - const: nxp,lpc3250 + +... diff --git a/dts/Bindings/arm/omap/omap.txt b/dts/Bindings/arm/omap/omap.txt index 1c1e48fd94..b301f753ed 100644 --- a/dts/Bindings/arm/omap/omap.txt +++ b/dts/Bindings/arm/omap/omap.txt @@ -160,6 +160,9 @@ Boards: - AM335X phyCORE-AM335x: Development kit compatible = "phytec,am335x-pcm-953", "phytec,am335x-phycore-som", "ti,am33xx" +- AM335x phyBOARD-REGOR: Single Board Computer + compatible = "phytec,am335x-regor", "phytec,am335x-phycore-som", "ti,am33xx" + - AM335X UC-8100-ME-T: Communication-centric industrial computing platform compatible = "moxa,uc-8100-me-t", "ti,am33xx"; diff --git a/dts/Bindings/arm/psci.txt b/dts/Bindings/arm/psci.txt deleted file mode 100644 index a2c4f1d524..0000000000 --- a/dts/Bindings/arm/psci.txt +++ /dev/null @@ -1,111 +0,0 @@ -* Power State Coordination Interface (PSCI) - -Firmware implementing the PSCI functions described in ARM document number -ARM DEN 0022A ("Power State Coordination Interface System Software on ARM -processors") can be used by Linux to initiate various CPU-centric power -operations. - -Issue A of the specification describes functions for CPU suspend, hotplug -and migration of secure software. - -Functions are invoked by trapping to the privilege level of the PSCI -firmware (specified as part of the binding below) and passing arguments -in a manner similar to that specified by AAPCS: - - r0 => 32-bit Function ID / return value - {r1 - r3} => Parameters - -Note that the immediate field of the trapping instruction must be set -to #0. - - -Main node required properties: - - - compatible : should contain at least one of: - - * "arm,psci" : For implementations complying to PSCI versions prior - to 0.2. - For these cases function IDs must be provided. - - * "arm,psci-0.2" : For implementations complying to PSCI 0.2. - Function IDs are not required and should be ignored by - an OS with PSCI 0.2 support, but are permitted to be - present for compatibility with existing software when - "arm,psci" is later in the compatible list. - - * "arm,psci-1.0" : For implementations complying to PSCI 1.0. - PSCI 1.0 is backward compatible with PSCI 0.2 with - minor specification updates, as defined in the PSCI - specification[2]. - - - method : The method of calling the PSCI firmware. Permitted - values are: - - "smc" : SMC #0, with the register assignments specified - in this binding. - - "hvc" : HVC #0, with the register assignments specified - in this binding. - -Main node optional properties: - - - cpu_suspend : Function ID for CPU_SUSPEND operation - - - cpu_off : Function ID for CPU_OFF operation - - - cpu_on : Function ID for CPU_ON operation - - - migrate : Function ID for MIGRATE operation - -Device tree nodes that require usage of PSCI CPU_SUSPEND function (ie idle -state nodes, as per bindings in [1]) must specify the following properties: - -- arm,psci-suspend-param - Usage: Required for state nodes[1] if the corresponding - idle-states node entry-method property is set - to "psci". - Value type: <u32> - Definition: power_state parameter to pass to the PSCI - suspend call. - -Example: - -Case 1: PSCI v0.1 only. - - psci { - compatible = "arm,psci"; - method = "smc"; - cpu_suspend = <0x95c10000>; - cpu_off = <0x95c10001>; - cpu_on = <0x95c10002>; - migrate = <0x95c10003>; - }; - -Case 2: PSCI v0.2 only - - psci { - compatible = "arm,psci-0.2"; - method = "smc"; - }; - -Case 3: PSCI v0.2 and PSCI v0.1. - - A DTB may provide IDs for use by kernels without PSCI 0.2 support, - enabling firmware and hypervisors to support existing and new kernels. - These IDs will be ignored by kernels with PSCI 0.2 support, which will - use the standard PSCI 0.2 IDs exclusively. - - psci { - compatible = "arm,psci-0.2", "arm,psci"; - method = "hvc"; - - cpu_on = < arbitrary value >; - cpu_off = < arbitrary value >; - - ... - }; - -[1] Kernel documentation - ARM idle states bindings - Documentation/devicetree/bindings/arm/idle-states.txt -[2] Power State Coordination Interface (PSCI) specification - http://infocenter.arm.com/help/topic/com.arm.doc.den0022c/DEN0022C_Power_State_Coordination_Interface.pdf diff --git a/dts/Bindings/arm/psci.yaml b/dts/Bindings/arm/psci.yaml new file mode 100644 index 0000000000..7abdf58b33 --- /dev/null +++ b/dts/Bindings/arm/psci.yaml @@ -0,0 +1,163 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/psci.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Power State Coordination Interface (PSCI) + +maintainers: + - Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> + +description: |+ + Firmware implementing the PSCI functions described in ARM document number + ARM DEN 0022A ("Power State Coordination Interface System Software on ARM + processors") can be used by Linux to initiate various CPU-centric power + operations. + + Issue A of the specification describes functions for CPU suspend, hotplug + and migration of secure software. + + Functions are invoked by trapping to the privilege level of the PSCI + firmware (specified as part of the binding below) and passing arguments + in a manner similar to that specified by AAPCS: + + r0 => 32-bit Function ID / return value + {r1 - r3} => Parameters + + Note that the immediate field of the trapping instruction must be set + to #0. + + [2] Power State Coordination Interface (PSCI) specification + http://infocenter.arm.com/help/topic/com.arm.doc.den0022c/DEN0022C_Power_State_Coordination_Interface.pdf + +properties: + compatible: + oneOf: + - description: + For implementations complying to PSCI versions prior to 0.2. + const: arm,psci + + - description: + For implementations complying to PSCI 0.2. + const: arm,psci-0.2 + + - description: + For implementations complying to PSCI 0.2. + Function IDs are not required and should be ignored by an OS with + PSCI 0.2 support, but are permitted to be present for compatibility + with existing software when "arm,psci" is later in the compatible + list. + items: + - const: arm,psci-0.2 + - const: arm,psci + + - description: + For implementations complying to PSCI 1.0. + const: arm,psci-1.0 + + - description: + For implementations complying to PSCI 1.0. + PSCI 1.0 is backward compatible with PSCI 0.2 with minor + specification updates, as defined in the PSCI specification[2]. + items: + - const: arm,psci-1.0 + - const: arm,psci-0.2 + + method: + description: The method of calling the PSCI firmware. + allOf: + - $ref: /schemas/types.yaml#/definitions/string-array + - enum: + # SMC #0, with the register assignments specified in this binding. + - smc + # HVC #0, with the register assignments specified in this binding. + - hvc + + cpu_suspend: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Function ID for CPU_SUSPEND operation + + cpu_off: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Function ID for CPU_OFF operation + + cpu_on: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Function ID for CPU_ON operation + + migrate: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Function ID for MIGRATE operation + + arm,psci-suspend-param: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + power_state parameter to pass to the PSCI suspend call. + + Device tree nodes that require usage of PSCI CPU_SUSPEND function (ie + idle state nodes with entry-method property is set to "psci", as per + bindings in [1]) must specify this property. + + [1] Kernel documentation - ARM idle states bindings + Documentation/devicetree/bindings/arm/idle-states.txt + + +required: + - compatible + - method + +allOf: + - if: + properties: + compatible: + contains: + const: arm,psci + then: + required: + - cpu_off + - cpu_on + +examples: + - |+ + + // Case 1: PSCI v0.1 only. + + psci { + compatible = "arm,psci"; + method = "smc"; + cpu_suspend = <0x95c10000>; + cpu_off = <0x95c10001>; + cpu_on = <0x95c10002>; + migrate = <0x95c10003>; + }; + + - |+ + + // Case 2: PSCI v0.2 only + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + + - |+ + + // Case 3: PSCI v0.2 and PSCI v0.1. + + /* + * A DTB may provide IDs for use by kernels without PSCI 0.2 support, + * enabling firmware and hypervisors to support existing and new kernels. + * These IDs will be ignored by kernels with PSCI 0.2 support, which will + * use the standard PSCI 0.2 IDs exclusively. + */ + + psci { + compatible = "arm,psci-0.2", "arm,psci"; + method = "hvc"; + + cpu_on = <0x95c10002>; + cpu_off = <0x95c10001>; + }; +... diff --git a/dts/Bindings/arm/qcom.yaml b/dts/Bindings/arm/qcom.yaml index f6316ab663..54ef6b6b91 100644 --- a/dts/Bindings/arm/qcom.yaml +++ b/dts/Bindings/arm/qcom.yaml @@ -102,6 +102,15 @@ properties: - const: qcom,msm8960 - items: + - enum: + - fairphone,fp2 + - lge,hammerhead + - sony,xperia-amami + - sony,xperia-castor + - sony,xperia-honami + - const: qcom,msm8974 + + - items: - const: qcom,msm8916-mtp/1 - const: qcom,msm8916-mtp - const: qcom,msm8916 @@ -110,6 +119,11 @@ properties: - const: qcom,msm8996-mtp - items: + - enum: + - qcom,ipq4019-ap-dk04.1-c3 + - qcom,ipq4019-ap-dk07.1-c1 + - qcom,ipq4019-ap-dk07.1-c2 + - qcom,ipq4019-dk04.1-c1 - const: qcom,ipq4019 - items: diff --git a/dts/Bindings/arm/rda.txt b/dts/Bindings/arm/rda.txt deleted file mode 100644 index 43c80762c4..0000000000 --- a/dts/Bindings/arm/rda.txt +++ /dev/null @@ -1,17 +0,0 @@ -RDA Micro platforms device tree bindings ----------------------------------------- - -RDA8810PL SoC -============= - -Required root node properties: - - - compatible : must contain "rda,8810pl" - - -Boards: - -Root node property compatible must contain, depending on board: - - - Orange Pi 2G-IoT: "xunlong,orangepi-2g-iot" - - Orange Pi i96: "xunlong,orangepi-i96" diff --git a/dts/Bindings/arm/rda.yaml b/dts/Bindings/arm/rda.yaml new file mode 100644 index 0000000000..51cec2b63b --- /dev/null +++ b/dts/Bindings/arm/rda.yaml @@ -0,0 +1,20 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/rda.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: RDA Micro platforms device tree bindings + +maintainers: + - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + +properties: + compatible: + items: + - enum: + - xunlong,orangepi-2g-iot # Orange Pi 2G-IoT + - xunlong,orangepi-i96 # Orange Pi i96 + - const: rda,8810pl + +... diff --git a/dts/Bindings/arm/renesas.yaml b/dts/Bindings/arm/renesas.yaml index 19f379863d..28eb458f76 100644 --- a/dts/Bindings/arm/renesas.yaml +++ b/dts/Bindings/arm/renesas.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 %YAML 1.2 --- -$id: http://devicetree.org/schemas/arm/shmobile.yaml# +$id: http://devicetree.org/schemas/arm/renesas.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Renesas SH-Mobile, R-Mobile, and R-Car Platform Device Tree Bindings @@ -106,6 +106,14 @@ properties: - description: RZ/G2M (R8A774A1) items: + - enum: + - hoperun,hihope-rzg2m # HopeRun HiHope RZ/G2M platform + - const: renesas,r8a774a1 + + - items: + - enum: + - hoperun,hihope-rzg2-ex # HopeRun expansion board for HiHope RZ/G2 platforms + - const: hoperun,hihope-rzg2m - const: renesas,r8a774a1 - description: RZ/G2E (R8A774C0) diff --git a/dts/Bindings/arm/rockchip.yaml b/dts/Bindings/arm/rockchip.yaml index 5c6bbf10ab..34865042f4 100644 --- a/dts/Bindings/arm/rockchip.yaml +++ b/dts/Bindings/arm/rockchip.yaml @@ -316,6 +316,19 @@ properties: - const: haoyu,marsboard-rk3066 - const: rockchip,rk3066a + - description: Hugsun X99 TV Box + items: + - const: hugsun,x99 + - const: rockchip,rk3399 + + - description: Khadas Edge series boards + items: + - enum: + - khadas,edge + - khadas,edge-captain + - khadas,edge-v + - const: rockchip,rk3399 + - description: mqmaker MiQi items: - const: mqmaker,miqi diff --git a/dts/Bindings/arm/socionext/milbeaut.yaml b/dts/Bindings/arm/socionext/milbeaut.yaml index aae53fc3cb..2bd519d2e8 100644 --- a/dts/Bindings/arm/socionext/milbeaut.yaml +++ b/dts/Bindings/arm/socionext/milbeaut.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 %YAML 1.2 --- -$id: http://devicetree.org/schemas/arm/milbeaut.yaml# +$id: http://devicetree.org/schemas/arm/socionext/milbeaut.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Milbeaut platforms device tree bindings diff --git a/dts/Bindings/arm/stm32/mlahb.txt b/dts/Bindings/arm/stm32/mlahb.txt new file mode 100644 index 0000000000..25307aa1eb --- /dev/null +++ b/dts/Bindings/arm/stm32/mlahb.txt @@ -0,0 +1,37 @@ +ML-AHB interconnect bindings + +These bindings describe the STM32 SoCs ML-AHB interconnect bus which connects +a Cortex-M subsystem with dedicated memories. +The MCU SRAM and RETRAM memory parts can be accessed through different addresses +(see "RAM aliases" in [1]) using different buses (see [2]) : balancing the +Cortex-M firmware accesses among those ports allows to tune the system +performance. + +[1]: https://www.st.com/resource/en/reference_manual/dm00327659.pdf +[2]: https://wiki.st.com/stm32mpu/wiki/STM32MP15_RAM_mapping + +Required properties: +- compatible: should be "simple-bus" +- dma-ranges: describes memory addresses translation between the local CPU and + the remote Cortex-M processor. Each memory region, is declared with + 3 parameters: + - param 1: device base address (Cortex-M processor address) + - param 2: physical base address (local CPU address) + - param 3: size of the memory region. + +The Cortex-M remote processor accessed via the mlahb interconnect is described +by a child node. + +Example: +mlahb { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + dma-ranges = <0x00000000 0x38000000 0x10000>, + <0x10000000 0x10000000 0x60000>, + <0x30000000 0x30000000 0x60000>; + + m4_rproc: m4@10000000 { + ... + }; +}; diff --git a/dts/Bindings/arm/stm32/stm32.txt b/dts/Bindings/arm/stm32/stm32.txt deleted file mode 100644 index 6808ed9ddf..0000000000 --- a/dts/Bindings/arm/stm32/stm32.txt +++ /dev/null @@ -1,10 +0,0 @@ -STMicroelectronics STM32 Platforms Device Tree Bindings - -Each device tree must specify which STM32 SoC it uses, -using one of the following compatible strings: - - st,stm32f429 - st,stm32f469 - st,stm32f746 - st,stm32h743 - st,stm32mp157 diff --git a/dts/Bindings/arm/stm32/stm32.yaml b/dts/Bindings/arm/stm32/stm32.yaml new file mode 100644 index 0000000000..4d194f1eb0 --- /dev/null +++ b/dts/Bindings/arm/stm32/stm32.yaml @@ -0,0 +1,31 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/stm32/stm32.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectronics STM32 Platforms Device Tree Bindings + +maintainers: + - Alexandre Torgue <alexandre.torgue@st.com> + +properties: + compatible: + oneOf: + - items: + - const: st,stm32f429 + + - items: + - const: st,stm32f469 + + - items: + - const: st,stm32f746 + + - items: + - const: st,stm32h743 + + - items: + - enum: + - arrow,stm32mp157a-avenger96 # Avenger96 + - const: st,stm32mp157 +... diff --git a/dts/Bindings/arm/sunxi.yaml b/dts/Bindings/arm/sunxi.yaml index 285f4fc851..000a00d12d 100644 --- a/dts/Bindings/arm/sunxi.yaml +++ b/dts/Bindings/arm/sunxi.yaml @@ -263,7 +263,7 @@ properties: - description: ICNova A20 SWAC items: - - const: swac,icnova-a20-swac + - const: incircuit,icnova-a20-swac - const: incircuit,icnova-a20 - const: allwinner,sun7i-a20 diff --git a/dts/Bindings/arm/ti/k3.txt b/dts/Bindings/arm/ti/k3.txt index 6a059cabb2..333e725612 100644 --- a/dts/Bindings/arm/ti/k3.txt +++ b/dts/Bindings/arm/ti/k3.txt @@ -13,6 +13,9 @@ architecture it uses, using one of the following compatible values: - AM654 compatible = "ti,am654"; +- J721E + compatible = "ti,j721e"; + Boards ------ diff --git a/dts/Bindings/arm/ti/ti,davinci.yaml b/dts/Bindings/arm/ti/ti,davinci.yaml index 4326d2cfa1..a8765ba294 100644 --- a/dts/Bindings/arm/ti/ti,davinci.yaml +++ b/dts/Bindings/arm/ti/ti,davinci.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 %YAML 1.2 --- -$id: http://devicetree.org/schemas/arm/ti/davinci.yaml# +$id: http://devicetree.org/schemas/arm/ti/ti,davinci.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Texas Instruments DaVinci Platforms Device Tree Bindings diff --git a/dts/Bindings/arm/xen.txt b/dts/Bindings/arm/xen.txt index c9b9321434..db5c56db30 100644 --- a/dts/Bindings/arm/xen.txt +++ b/dts/Bindings/arm/xen.txt @@ -54,7 +54,7 @@ hypervisor { }; The format and meaning of the "xen,uefi-*" parameters are similar to those in -Documentation/arm/uefi.txt, which are provided by the regular UEFI stub. However +Documentation/arm/uefi.rst, which are provided by the regular UEFI stub. However they differ because they are provided by the Xen hypervisor, together with a set of UEFI runtime services implemented via hypercalls, see http://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,platform.h.html. diff --git a/dts/Bindings/bus/allwinner,sun8i-a23-rsb.yaml b/dts/Bindings/bus/allwinner,sun8i-a23-rsb.yaml new file mode 100644 index 0000000000..be32f087c5 --- /dev/null +++ b/dts/Bindings/bus/allwinner,sun8i-a23-rsb.yaml @@ -0,0 +1,80 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/bus/allwinner,sun8i-a23-rsb.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A23 RSB Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <maxime.ripard@bootlin.com> + +properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + compatible: + oneOf: + - const: allwinner,sun8i-a23-rsb + - items: + - const: allwinner,sun8i-a83t-rsb + - const: allwinner,sun8i-a23-rsb + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + resets: + maxItems: 1 + + clock-frequency: + minimum: 1 + maximum: 20000000 + +patternProperties: + "^.*@[0-9a-fA-F]+$": + type: object + properties: + reg: + maxItems: 1 + + required: + - reg + +required: + - compatible + - reg + - interrupts + - clocks + - resets + +examples: + - | + rsb@1f03400 { + compatible = "allwinner,sun8i-a23-rsb"; + reg = <0x01f03400 0x400>; + interrupts = <0 39 4>; + clocks = <&apb0_gates 3>; + clock-frequency = <3000000>; + resets = <&apb0_rst 3>; + #address-cells = <1>; + #size-cells = <0>; + + pmic@3e3 { + compatible = "..."; + reg = <0x3e3>; + + /* ... */ + }; + }; + +additionalProperties: false diff --git a/dts/Bindings/bus/sunxi-rsb.txt b/dts/Bindings/bus/sunxi-rsb.txt deleted file mode 100644 index eb3ed628c6..0000000000 --- a/dts/Bindings/bus/sunxi-rsb.txt +++ /dev/null @@ -1,47 +0,0 @@ -Allwinner Reduced Serial Bus (RSB) controller - -The RSB controller found on later Allwinner SoCs is an SMBus like 2 wire -serial bus with 1 master and up to 15 slaves. It is represented by a node -for the controller itself, and child nodes representing the slave devices. - -Required properties : - - - reg : Offset and length of the register set for the controller. - - compatible : Shall be "allwinner,sun8i-a23-rsb". - - interrupts : The interrupt line associated to the RSB controller. - - clocks : The gate clk associated to the RSB controller. - - resets : The reset line associated to the RSB controller. - - #address-cells : shall be 1 - - #size-cells : shall be 0 - -Optional properties : - - - clock-frequency : Desired RSB bus clock frequency in Hz. Maximum is 20MHz. - If not set this defaults to 3MHz. - -Child nodes: - -An RSB controller node can contain zero or more child nodes representing -slave devices on the bus. Child 'reg' properties should contain the slave -device's hardware address. The hardware address is hardwired in the device, -which can normally be found in the datasheet. - -Example: - - rsb@1f03400 { - compatible = "allwinner,sun8i-a23-rsb"; - reg = <0x01f03400 0x400>; - interrupts = <0 39 4>; - clocks = <&apb0_gates 3>; - clock-frequency = <3000000>; - resets = <&apb0_rst 3>; - #address-cells = <1>; - #size-cells = <0>; - - pmic@3e3 { - compatible = "..."; - reg = <0x3e3>; - - /* ... */ - }; - }; diff --git a/dts/Bindings/clock/allwinner,sun4i-a10-ccu.yaml b/dts/Bindings/clock/allwinner,sun4i-a10-ccu.yaml new file mode 100644 index 0000000000..fa4d143a73 --- /dev/null +++ b/dts/Bindings/clock/allwinner,sun4i-a10-ccu.yaml @@ -0,0 +1,141 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-ccu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner Clock Control Unit Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <maxime.ripard@bootlin.com> + +properties: + "#clock-cells": + const: 1 + + "#reset-cells": + const: 1 + + compatible: + enum: + - allwinner,sun4i-a10-ccu + - allwinner,sun5i-a10s-ccu + - allwinner,sun5i-a13-ccu + - allwinner,sun6i-a31-ccu + - allwinner,sun7i-a20-ccu + - allwinner,sun8i-a23-ccu + - allwinner,sun8i-a33-ccu + - allwinner,sun8i-a83t-ccu + - allwinner,sun8i-a83t-r-ccu + - allwinner,sun8i-h3-ccu + - allwinner,sun8i-h3-r-ccu + - allwinner,sun8i-r40-ccu + - allwinner,sun8i-v3s-ccu + - allwinner,sun9i-a80-ccu + - allwinner,sun50i-a64-ccu + - allwinner,sun50i-a64-r-ccu + - allwinner,sun50i-h5-ccu + - allwinner,sun50i-h6-ccu + - allwinner,sun50i-h6-r-ccu + - allwinner,suniv-f1c100s-ccu + - nextthing,gr8-ccu + + reg: + maxItems: 1 + + clocks: + minItems: 2 + maxItems: 4 + items: + - description: High Frequency Oscillator (usually at 24MHz) + - description: Low Frequency Oscillator (usually at 32kHz) + - description: Internal Oscillator + - description: Peripherals PLL + + clock-names: + minItems: 2 + maxItems: 4 + items: + - const: hosc + - const: losc + - const: iosc + - const: pll-periph + +required: + - "#clock-cells" + - "#reset-cells" + - compatible + - reg + - clocks + - clock-names + +if: + properties: + compatible: + enum: + - allwinner,sun8i-a83t-r-ccu + - allwinner,sun8i-h3-r-ccu + - allwinner,sun50i-a64-r-ccu + - allwinner,sun50i-h6-r-ccu + +then: + properties: + clocks: + minItems: 4 + maxItems: 4 + + clock-names: + minItems: 4 + maxItems: 4 + +else: + if: + properties: + compatible: + const: allwinner,sun50i-h6-ccu + + then: + properties: + clocks: + minItems: 3 + maxItems: 3 + + clock-names: + minItems: 3 + maxItems: 3 + + else: + properties: + clocks: + minItems: 2 + maxItems: 2 + + clock-names: + minItems: 2 + maxItems: 2 + +additionalProperties: false + +examples: + - | + ccu: clock@1c20000 { + compatible = "allwinner,sun8i-h3-ccu"; + reg = <0x01c20000 0x400>; + clocks = <&osc24M>, <&osc32k>; + clock-names = "hosc", "losc"; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + - | + r_ccu: clock@1f01400 { + compatible = "allwinner,sun50i-a64-r-ccu"; + reg = <0x01f01400 0x100>; + clocks = <&osc24M>, <&osc32k>, <&iosc>, <&ccu 11>; + clock-names = "hosc", "losc", "iosc", "pll-periph"; + #clock-cells = <1>; + #reset-cells = <1>; + }; + +... diff --git a/dts/Bindings/clock/amlogic,gxbb-clkc.txt b/dts/Bindings/clock/amlogic,gxbb-clkc.txt index 5c8b105be4..6eaa520923 100644 --- a/dts/Bindings/clock/amlogic,gxbb-clkc.txt +++ b/dts/Bindings/clock/amlogic,gxbb-clkc.txt @@ -10,6 +10,7 @@ Required Properties: "amlogic,gxl-clkc" for GXL and GXM SoC, "amlogic,axg-clkc" for AXG SoC. "amlogic,g12a-clkc" for G12A SoC. + "amlogic,g12b-clkc" for G12B SoC. - clocks : list of clock phandle, one for each entry clock-names. - clock-names : should contain the following: * "xtal": the platform xtal diff --git a/dts/Bindings/clock/at91-clock.txt b/dts/Bindings/clock/at91-clock.txt index b520280e33..13f45db3b6 100644 --- a/dts/Bindings/clock/at91-clock.txt +++ b/dts/Bindings/clock/at91-clock.txt @@ -9,10 +9,11 @@ Slow Clock controller: Required properties: - compatible : shall be one of the following: "atmel,at91sam9x5-sckc", - "atmel,sama5d3-sckc" or - "atmel,sama5d4-sckc": + "atmel,sama5d3-sckc", + "atmel,sama5d4-sckc" or + "microchip,sam9x60-sckc": at91 SCKC (Slow Clock Controller) -- #clock-cells : shall be 0. +- #clock-cells : shall be 1 for "microchip,sam9x60-sckc" otherwise shall be 0. - clocks : shall be the input parent clock phandle for the clock. Optional properties: diff --git a/dts/Bindings/clock/brcm,bcm63xx-clocks.txt b/dts/Bindings/clock/brcm,bcm63xx-clocks.txt new file mode 100644 index 0000000000..3041657e2f --- /dev/null +++ b/dts/Bindings/clock/brcm,bcm63xx-clocks.txt @@ -0,0 +1,22 @@ +Gated Clock Controller Bindings for MIPS based BCM63XX SoCs + +Required properties: +- compatible: must be one of: + "brcm,bcm3368-clocks" + "brcm,bcm6328-clocks" + "brcm,bcm6358-clocks" + "brcm,bcm6362-clocks" + "brcm,bcm6368-clocks" + "brcm,bcm63268-clocks" + +- reg: Address and length of the register set +- #clock-cells: must be <1> + + +Example: + +clkctl: clock-controller@10000004 { + compatible = "brcm,bcm6328-clocks"; + reg = <0x10000004 0x4>; + #clock-cells = <1>; +}; diff --git a/dts/Bindings/clock/cirrus,lochnagar.txt b/dts/Bindings/clock/cirrus,lochnagar.txt index b8d8ef3bdc..52a064c789 100644 --- a/dts/Bindings/clock/cirrus,lochnagar.txt +++ b/dts/Bindings/clock/cirrus,lochnagar.txt @@ -40,6 +40,7 @@ Optional properties: input audio clocks from host system. - ln-psia1-mclk, ln-psia2-mclk : Optional input audio clocks from external connector. + - ln-spdif-mclk : Optional input audio clock from SPDIF. - ln-spdif-clkout : Optional input audio clock from SPDIF. - ln-adat-mclk : Optional input audio clock from ADAT. - ln-pmic-32k : On board fixed clock. diff --git a/dts/Bindings/clock/mvebu-core-clock.txt b/dts/Bindings/clock/mvebu-core-clock.txt index 796c260c18..d8f5c490f8 100644 --- a/dts/Bindings/clock/mvebu-core-clock.txt +++ b/dts/Bindings/clock/mvebu-core-clock.txt @@ -59,6 +59,7 @@ Required properties: "marvell,dove-core-clock" - for Dove SoC core clocks "marvell,kirkwood-core-clock" - for Kirkwood SoC (except mv88f6180) "marvell,mv88f6180-core-clock" - for Kirkwood MV88f6180 SoC + "marvell,mv98dx1135-core-clock" - for Kirkwood 98dx1135 SoC "marvell,mv88f5181-core-clock" - for Orion MV88F5181 SoC "marvell,mv88f5182-core-clock" - for Orion MV88F5182 SoC "marvell,mv88f5281-core-clock" - for Orion MV88F5281 SoC diff --git a/dts/Bindings/clock/qcom,gpucc.txt b/dts/Bindings/clock/qcom,gpucc.txt index 4e5215ef1a..269afe8a75 100644 --- a/dts/Bindings/clock/qcom,gpucc.txt +++ b/dts/Bindings/clock/qcom,gpucc.txt @@ -2,13 +2,15 @@ Qualcomm Graphics Clock & Reset Controller Binding -------------------------------------------------- Required properties : -- compatible : shall contain "qcom,sdm845-gpucc" +- compatible : shall contain "qcom,sdm845-gpucc" or "qcom,msm8998-gpucc" - reg : shall contain base register location and length - #clock-cells : from common clock binding, shall contain 1 - #reset-cells : from common reset binding, shall contain 1 - #power-domain-cells : from generic power domain binding, shall contain 1 - clocks : shall contain the XO clock + shall contain the gpll0 out main clock (msm8998) - clock-names : shall be "xo" + shall be "gpll0" (msm8998) Example: gpucc: clock-controller@5090000 { diff --git a/dts/Bindings/clock/renesas,r9a06g032-sysctrl.txt b/dts/Bindings/clock/renesas,r9a06g032-sysctrl.txt index d60b99756b..aed713cf08 100644 --- a/dts/Bindings/clock/renesas,r9a06g032-sysctrl.txt +++ b/dts/Bindings/clock/renesas,r9a06g032-sysctrl.txt @@ -13,6 +13,7 @@ Required Properties: - external (optional) RGMII_REFCLK - clock-names: Must be: clock-names = "mclk", "rtc", "jtag", "rgmii_ref_ext"; + - #power-domain-cells: Must be 0 Examples -------- @@ -27,6 +28,7 @@ Examples clocks = <&ext_mclk>, <&ext_rtc_clk>, <&ext_jtag_clk>, <&ext_rgmii_ref>; clock-names = "mclk", "rtc", "jtag", "rgmii_ref_ext"; + #power-domain-cells = <0>; }; - Other nodes can use the clocks provided by SYSCTRL as in: @@ -38,6 +40,7 @@ Examples interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&sysctrl R9A06G032_CLK_UART0>; - clock-names = "baudclk"; + clocks = <&sysctrl R9A06G032_CLK_UART0>, <&sysctrl R9A06G032_HCLK_UART0>; + clock-names = "baudclk", "apb_pclk"; + power-domains = <&sysctrl>; }; diff --git a/dts/Bindings/clock/silabs,si5341.txt b/dts/Bindings/clock/silabs,si5341.txt new file mode 100644 index 0000000000..a70c333e4c --- /dev/null +++ b/dts/Bindings/clock/silabs,si5341.txt @@ -0,0 +1,162 @@ +Binding for Silicon Labs Si5341 and Si5340 programmable i2c clock generator. + +Reference +[1] Si5341 Data Sheet + https://www.silabs.com/documents/public/data-sheets/Si5341-40-D-DataSheet.pdf +[2] Si5341 Reference Manual + https://www.silabs.com/documents/public/reference-manuals/Si5341-40-D-RM.pdf + +The Si5341 and Si5340 are programmable i2c clock generators with up to 10 output +clocks. The chip contains a PLL that sources 5 (or 4) multisynth clocks, which +in turn can be directed to any of the 10 (or 4) outputs through a divider. +The internal structure of the clock generators can be found in [2]. + +The driver can be used in "as is" mode, reading the current settings from the +chip at boot, in case you have a (pre-)programmed device. If the PLL is not +configured when the driver probes, it assumes the driver must fully initialize +it. + +The device type, speed grade and revision are determined runtime by probing. + +The driver currently only supports XTAL input mode, and does not support any +fancy input configurations. They can still be programmed into the chip and +the driver will leave them "as is". + +==I2C device node== + +Required properties: +- compatible: shall be one of the following: + "silabs,si5340" - Si5340 A/B/C/D + "silabs,si5341" - Si5341 A/B/C/D +- reg: i2c device address, usually 0x74 +- #clock-cells: from common clock binding; shall be set to 2. + The first value is "0" for outputs, "1" for synthesizers. + The second value is the output or synthesizer index. +- clocks: from common clock binding; list of parent clock handles, + corresponding to inputs. Use a fixed clock for the "xtal" input. + At least one must be present. +- clock-names: One of: "xtal", "in0", "in1", "in2" +- vdd-supply: Regulator node for VDD + +Optional properties: +- vdda-supply: Regulator node for VDDA +- vdds-supply: Regulator node for VDDS +- silabs,pll-m-num, silabs,pll-m-den: Numerator and denominator for PLL + feedback divider. Must be such that the PLL output is in the valid range. For + example, to create 14GHz from a 48MHz xtal, use m-num=14000 and m-den=48. Only + the fraction matters, using 3500 and 12 will deliver the exact same result. + If these are not specified, and the PLL is not yet programmed when the driver + probes, the PLL will be set to 14GHz. +- silabs,reprogram: When present, the driver will always assume the device must + be initialized, and always performs the soft-reset routine. Since this will + temporarily stop all output clocks, don't do this if the chip is generating + the CPU clock for example. +- interrupts: Interrupt for INTRb pin. +- #address-cells: shall be set to 1. +- #size-cells: shall be set to 0. + + +== Child nodes: Outputs == + +The child nodes list the output clocks. + +Each of the clock outputs can be overwritten individually by using a child node. +If a child node for a clock output is not set, the configuration remains +unchanged. + +Required child node properties: +- reg: number of clock output. + +Optional child node properties: +- vdd-supply: Regulator node for VDD for this output. The driver selects default + values for common-mode and amplitude based on the voltage. +- silabs,format: Output format, one of: + 1 = differential (defaults to LVDS levels) + 2 = low-power (defaults to HCSL levels) + 4 = LVCMOS +- silabs,common-mode: Manually override output common mode, see [2] for values +- silabs,amplitude: Manually override output amplitude, see [2] for values +- silabs,synth-master: boolean. If present, this output is allowed to change the + multisynth frequency dynamically. +- silabs,silabs,disable-high: boolean. If set, the clock output is driven HIGH + when disabled, otherwise it's driven LOW. + +==Example== + +/* 48MHz reference crystal */ +ref48: ref48M { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <48000000>; +}; + +i2c-master-node { + /* Programmable clock (for logic) */ + si5341: clock-generator@74 { + reg = <0x74>; + compatible = "silabs,si5341"; + #clock-cells = <2>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&ref48>; + clock-names = "xtal"; + + silabs,pll-m-num = <14000>; /* PLL at 14.0 GHz */ + silabs,pll-m-den = <48>; + silabs,reprogram; /* Chips are not programmed, always reset */ + + out@0 { + reg = <0>; + silabs,format = <1>; /* LVDS 3v3 */ + silabs,common-mode = <3>; + silabs,amplitude = <3>; + silabs,synth-master; + }; + + /* + * Output 6 configuration: + * LVDS 1v8 + */ + out@6 { + reg = <6>; + silabs,format = <1>; /* LVDS 1v8 */ + silabs,common-mode = <13>; + silabs,amplitude = <3>; + }; + + /* + * Output 8 configuration: + * HCSL 3v3 + */ + out@8 { + reg = <8>; + silabs,format = <2>; + silabs,common-mode = <11>; + silabs,amplitude = <3>; + }; + }; +}; + +some-video-node { + /* Standard clock bindings */ + clock-names = "pixel"; + clocks = <&si5341 0 7>; /* Output 7 */ + + /* Set output 7 to use syntesizer 3 as its parent */ + assigned-clocks = <&si5341 0 7>, <&si5341 1 3>; + assigned-clock-parents = <&si5341 1 3>; + /* Set output 7 to 148.5 MHz using a synth frequency of 594 MHz */ + assigned-clock-rates = <148500000>, <594000000>; +}; + +some-audio-node { + clock-names = "i2s-clk"; + clocks = <&si5341 0 0>; + /* + * since output 0 is a synth-master, the synth will be automatically set + * to an appropriate frequency when the audio driver requests another + * frequency. We give control over synth 2 to this output here. + */ + assigned-clocks = <&si5341 0 0>; + assigned-clock-parents = <&si5341 1 2>; +}; diff --git a/dts/Bindings/clock/sunxi-ccu.txt b/dts/Bindings/clock/sunxi-ccu.txt deleted file mode 100644 index e3bd88ae45..0000000000 --- a/dts/Bindings/clock/sunxi-ccu.txt +++ /dev/null @@ -1,62 +0,0 @@ -Allwinner Clock Control Unit Binding ------------------------------------- - -Required properties : -- compatible: must contain one of the following compatibles: - - "allwinner,sun4i-a10-ccu" - - "allwinner,sun5i-a10s-ccu" - - "allwinner,sun5i-a13-ccu" - - "allwinner,sun6i-a31-ccu" - - "allwinner,sun7i-a20-ccu" - - "allwinner,sun8i-a23-ccu" - - "allwinner,sun8i-a33-ccu" - - "allwinner,sun8i-a83t-ccu" - - "allwinner,sun8i-a83t-r-ccu" - - "allwinner,sun8i-h3-ccu" - - "allwinner,sun8i-h3-r-ccu" -+ - "allwinner,sun8i-r40-ccu" - - "allwinner,sun8i-v3s-ccu" - - "allwinner,sun9i-a80-ccu" - - "allwinner,sun50i-a64-ccu" - - "allwinner,sun50i-a64-r-ccu" - - "allwinner,sun50i-h5-ccu" - - "allwinner,sun50i-h6-ccu" - - "allwinner,sun50i-h6-r-ccu" - - "allwinner,suniv-f1c100s-ccu" - - "nextthing,gr8-ccu" - -- reg: Must contain the registers base address and length -- clocks: phandle to the oscillators feeding the CCU. Two are needed: - - "hosc": the high frequency oscillator (usually at 24MHz) - - "losc": the low frequency oscillator (usually at 32kHz) - On the A83T, this is the internal 16MHz oscillator divided by 512 -- clock-names: Must contain the clock names described just above -- #clock-cells : must contain 1 -- #reset-cells : must contain 1 - -For the main CCU on H6, one more clock is needed: -- "iosc": the SoC's internal frequency oscillator - -For the PRCM CCUs on A83T/H3/A64/H6, two more clocks are needed: -- "pll-periph": the SoC's peripheral PLL from the main CCU -- "iosc": the SoC's internal frequency oscillator - -Example for generic CCU: -ccu: clock@1c20000 { - compatible = "allwinner,sun8i-h3-ccu"; - reg = <0x01c20000 0x400>; - clocks = <&osc24M>, <&osc32k>; - clock-names = "hosc", "losc"; - #clock-cells = <1>; - #reset-cells = <1>; -}; - -Example for PRCM CCU: -r_ccu: clock@1f01400 { - compatible = "allwinner,sun50i-a64-r-ccu"; - reg = <0x01f01400 0x100>; - clocks = <&osc24M>, <&osc32k>, <&iosc>, <&ccu CLK_PLL_PERIPH0>; - clock-names = "hosc", "losc", "iosc", "pll-periph"; - #clock-cells = <1>; - #reset-cells = <1>; -}; diff --git a/dts/Bindings/common-properties.txt b/dts/Bindings/common-properties.txt index a3448bfa1c..98a28130e1 100644 --- a/dts/Bindings/common-properties.txt +++ b/dts/Bindings/common-properties.txt @@ -5,30 +5,29 @@ Endianness ---------- The Devicetree Specification does not define any properties related to hardware -byteswapping, but endianness issues show up frequently in porting Linux to +byte swapping, but endianness issues show up frequently in porting drivers to different machine types. This document attempts to provide a consistent -way of handling byteswapping across drivers. +way of handling byte swapping across drivers. Optional properties: - big-endian: Boolean; force big endian register accesses unconditionally (e.g. ioread32be/iowrite32be). Use this if you - know the peripheral always needs to be accessed in BE mode. + know the peripheral always needs to be accessed in big endian (BE) mode. - little-endian: Boolean; force little endian register accesses unconditionally (e.g. readl/writel). Use this if you know the - peripheral always needs to be accessed in LE mode. + peripheral always needs to be accessed in little endian (LE) mode. - native-endian: Boolean; always use register accesses matched to the endianness of the kernel binary (e.g. LE vmlinux -> readl/writel, - BE vmlinux -> ioread32be/iowrite32be). In this case no byteswaps + BE vmlinux -> ioread32be/iowrite32be). In this case no byte swaps will ever be performed. Use this if the hardware "self-adjusts" register endianness based on the CPU's configured endianness. If a binding supports these properties, then the binding should also specify the default behavior if none of these properties are present. In such cases, little-endian is the preferred default, but it is not -a requirement. The of_device_is_big_endian() and of_fdt_is_big_endian() -helper functions do assume that little-endian is the default, because -most existing (PCI-based) drivers implicitly default to LE by using -readl/writel for MMIO accesses. +a requirement. Some implementations assume that little-endian is +the default, because most existing (PCI-based) drivers implicitly +default to LE for their MMIO accesses. Examples: Scenario 1 : CPU in LE mode & device in LE mode. diff --git a/dts/Bindings/cpufreq/imx-cpufreq-dt.txt b/dts/Bindings/cpufreq/imx-cpufreq-dt.txt new file mode 100644 index 0000000000..87bff5add3 --- /dev/null +++ b/dts/Bindings/cpufreq/imx-cpufreq-dt.txt @@ -0,0 +1,37 @@ +i.MX CPUFreq-DT OPP bindings +================================ + +Certain i.MX SoCs support different OPPs depending on the "market segment" and +"speed grading" value which are written in fuses. These bits are combined with +the opp-supported-hw values for each OPP to check if the OPP is allowed. + +Required properties: +-------------------- + +For each opp entry in 'operating-points-v2' table: +- opp-supported-hw: Two bitmaps indicating: + - Supported speed grade mask + - Supported market segment mask + 0: Consumer + 1: Extended Consumer + 2: Industrial + 3: Automotive + +Example: +-------- + +opp_table { + compatible = "operating-points-v2"; + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + /* grade >= 0, consumer only */ + opp-supported-hw = <0xf>, <0x3>; + }; + + opp-1300000000 { + opp-hz = /bits/ 64 <1300000000>; + opp-microvolt = <1000000>; + /* grade >= 1, all segments */ + opp-supported-hw = <0xe>, <0x7>; + }; +} diff --git a/dts/Bindings/crypto/atmel-crypto.txt b/dts/Bindings/crypto/atmel-crypto.txt index 6b458bb244..f2aab3dc2b 100644 --- a/dts/Bindings/crypto/atmel-crypto.txt +++ b/dts/Bindings/crypto/atmel-crypto.txt @@ -66,16 +66,3 @@ sha@f8034000 { dmas = <&dma1 2 17>; dma-names = "tx"; }; - -* Eliptic Curve Cryptography (I2C) - -Required properties: -- compatible : must be "atmel,atecc508a". -- reg: I2C bus address of the device. -- clock-frequency: must be present in the i2c controller node. - -Example: -atecc508a@c0 { - compatible = "atmel,atecc508a"; - reg = <0xC0>; -}; diff --git a/dts/Bindings/csky/pmu.txt b/dts/Bindings/csky/pmu.txt new file mode 100644 index 0000000000..728d05ca6a --- /dev/null +++ b/dts/Bindings/csky/pmu.txt @@ -0,0 +1,38 @@ +=============================== +C-SKY Performance Monitor Units +=============================== + +C-SKY Performance Monitor is designed for ck807/ck810/ck860 SMP soc and +it could count cpu's events for helping analysis performance issues. + +============================ +PMU node bindings definition +============================ + + Description: Describes PMU + + PROPERTIES + + - compatible + Usage: required + Value type: <string> + Definition: must be "csky,csky-pmu" + - interrupts + Usage: required + Value type: <u32 IRQ_TYPE_XXX> + Definition: must be pmu irq num defined by soc + - count-width + Usage: optional + Value type: <u32> + Definition: the width of pmu counter + +Examples: +--------- +#include <dt-bindings/interrupt-controller/irq.h> + + pmu: performace-monitor { + compatible = "csky,csky-pmu"; + interrupts = <23 IRQ_TYPE_EDGE_RISING>; + interrupt-parent = <&intc>; + count-width = <48>; + }; diff --git a/dts/Bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml b/dts/Bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml new file mode 100644 index 0000000000..47950fced2 --- /dev/null +++ b/dts/Bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml @@ -0,0 +1,100 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/allwinner,sun6i-a31-mipi-dsi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A31 MIPI-DSI Controller Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <maxime.ripard@bootlin.com> + +properties: + "#address-cells": true + "#size-cells": true + + compatible: + const: allwinner,sun6i-a31-mipi-dsi + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: Bus Clock + - description: Module Clock + + clock-names: + items: + - const: bus + - const: mod + + resets: + maxItems: 1 + + phys: + maxItems: 1 + + phy-names: + const: dphy + + port: + type: object + description: + A port node with endpoint definitions as defined in + Documentation/devicetree/bindings/media/video-interfaces.txt. That + port should be the input endpoint, usually coming from the + associated TCON. + +patternProperties: + "^panel@[0-9]+$": true + +required: + - "#address-cells" + - "#size-cells" + - compatible + - reg + - interrupts + - clocks + - clock-names + - phys + - phy-names + - resets + - port + +additionalProperties: false + +examples: + - | + dsi0: dsi@1ca0000 { + compatible = "allwinner,sun6i-a31-mipi-dsi"; + reg = <0x01ca0000 0x1000>; + interrupts = <0 89 4>; + clocks = <&ccu 23>, <&ccu 96>; + clock-names = "bus", "mod"; + resets = <&ccu 4>; + phys = <&dphy0>; + phy-names = "dphy"; + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "bananapi,lhr050h41", "ilitek,ili9881c"; + reg = <0>; + power-gpios = <&pio 1 7 0>; /* PB07 */ + reset-gpios = <&r_pio 0 5 1>; /* PL05 */ + backlight = <&pwm_bl>; + }; + + port { + dsi0_in_tcon0: endpoint { + remote-endpoint = <&tcon0_out_dsi0>; + }; + }; + }; + +... diff --git a/dts/Bindings/display/arm,komeda.txt b/dts/Bindings/display/arm,komeda.txt index 02b226532e..8513695ee4 100644 --- a/dts/Bindings/display/arm,komeda.txt +++ b/dts/Bindings/display/arm,komeda.txt @@ -7,10 +7,13 @@ Required properties: - clocks: A list of phandle + clock-specifier pairs, one for each entry in 'clock-names' - clock-names: A list of clock names. It should contain: - - "mclk": for the main processor clock - - "pclk": for the APB interface clock + - "aclk": for the main processor clock - #address-cells: Must be 1 - #size-cells: Must be 0 +- iommus: configure the stream id to IOMMU, Must be configured if want to + enable iommu in display. for how to configure this node please reference + devicetree/bindings/iommu/arm,smmu-v3.txt, + devicetree/bindings/iommu/iommu.txt Required properties for sub-node: pipeline@nq Each device contains one or two pipeline sub-nodes (at least one), each @@ -20,7 +23,6 @@ pipeline node should provide properties: in 'clock-names' - clock-names: should contain: - "pxclk": pixel clock - - "aclk": AXI interface clock - port: each pipeline connect to an encoder input port. The connection is modeled using the OF graph bindings specified in @@ -42,12 +44,15 @@ Example: compatible = "arm,mali-d71"; reg = <0xc00000 0x20000>; interrupts = <0 168 4>; - clocks = <&dpu_mclk>, <&dpu_aclk>; - clock-names = "mclk", "pclk"; + clocks = <&dpu_aclk>; + clock-names = "aclk"; + iommus = <&smmu 0>, <&smmu 1>, <&smmu 2>, <&smmu 3>, + <&smmu 4>, <&smmu 5>, <&smmu 6>, <&smmu 7>, + <&smmu 8>, <&smmu 9>; dp0_pipe0: pipeline@0 { - clocks = <&fpgaosc2>, <&dpu_aclk>; - clock-names = "pxclk", "aclk"; + clocks = <&fpgaosc2>; + clock-names = "pxclk"; reg = <0>; port { @@ -58,8 +63,8 @@ Example: }; dp0_pipe1: pipeline@1 { - clocks = <&fpgaosc2>, <&dpu_aclk>; - clock-names = "pxclk", "aclk"; + clocks = <&fpgaosc2>; + clock-names = "pxclk"; reg = <1>; port { diff --git a/dts/Bindings/display/bridge/renesas,dw-hdmi.txt b/dts/Bindings/display/bridge/renesas,dw-hdmi.txt index a41d280c3f..db680413e8 100644 --- a/dts/Bindings/display/bridge/renesas,dw-hdmi.txt +++ b/dts/Bindings/display/bridge/renesas,dw-hdmi.txt @@ -12,10 +12,12 @@ following device-specific properties. Required properties: - compatible : Shall contain one or more of + - "renesas,r8a774a1-hdmi" for R8A774A1 (RZ/G2M) compatible HDMI TX - "renesas,r8a7795-hdmi" for R8A7795 (R-Car H3) compatible HDMI TX - "renesas,r8a7796-hdmi" for R8A7796 (R-Car M3-W) compatible HDMI TX - "renesas,r8a77965-hdmi" for R8A77965 (R-Car M3-N) compatible HDMI TX - - "renesas,rcar-gen3-hdmi" for the generic R-Car Gen3 compatible HDMI TX + - "renesas,rcar-gen3-hdmi" for the generic R-Car Gen3 and RZ/G2 compatible + HDMI TX When compatible with generic versions, nodes must list the SoC-specific version corresponding to the platform first, followed by the diff --git a/dts/Bindings/display/bridge/renesas,lvds.txt b/dts/Bindings/display/bridge/renesas,lvds.txt index 900a884ad9..c6a196d0b0 100644 --- a/dts/Bindings/display/bridge/renesas,lvds.txt +++ b/dts/Bindings/display/bridge/renesas,lvds.txt @@ -9,6 +9,7 @@ Required properties: - compatible : Shall contain one of - "renesas,r8a7743-lvds" for R8A7743 (RZ/G1M) compatible LVDS encoders - "renesas,r8a7744-lvds" for R8A7744 (RZ/G1N) compatible LVDS encoders + - "renesas,r8a774a1-lvds" for R8A774A1 (RZ/G2M) compatible LVDS encoders - "renesas,r8a774c0-lvds" for R8A774C0 (RZ/G2E) compatible LVDS encoders - "renesas,r8a7790-lvds" for R8A7790 (R-Car H2) compatible LVDS encoders - "renesas,r8a7791-lvds" for R8A7791 (R-Car M2-W) compatible LVDS encoders @@ -45,14 +46,24 @@ OF graph bindings specified in Documentation/devicetree/bindings/graph.txt. Each port shall have a single endpoint. +Optional properties: + +- renesas,companion : phandle to the companion LVDS encoder. This property is + mandatory for the first LVDS encoder on D3 and E3 SoCs, and shall point to + the second encoder to be used as a companion in dual-link mode. It shall not + be set for any other LVDS encoder. + Example: lvds0: lvds@feb90000 { - compatible = "renesas,r8a7790-lvds"; - reg = <0 0xfeb90000 0 0x1c>; - clocks = <&cpg CPG_MOD 726>; - resets = <&cpg 726>; + compatible = "renesas,r8a77990-lvds"; + reg = <0 0xfeb90000 0 0x20>; + clocks = <&cpg CPG_MOD 727>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 727>; + + renesas,companion = <&lvds1>; ports { #address-cells = <1>; diff --git a/dts/Bindings/display/bridge/sii902x.txt b/dts/Bindings/display/bridge/sii902x.txt index 72d2dc6c3e..2df44b7d38 100644 --- a/dts/Bindings/display/bridge/sii902x.txt +++ b/dts/Bindings/display/bridge/sii902x.txt @@ -5,10 +5,44 @@ Required properties: - reg: i2c address of the bridge Optional properties: - - interrupts: describe the interrupt line used to inform the host + - interrupts: describe the interrupt line used to inform the host about hotplug events. - reset-gpios: OF device-tree gpio specification for RST_N pin. + HDMI audio properties: + - #sound-dai-cells: <0> or <1>. <0> if only i2s or spdif pin + is wired, <1> if the both are wired. HDMI audio is + configured only if this property is found. + - sil,i2s-data-lanes: Array of up to 4 integers with values of 0-3 + Each integer indicates which i2s pin is connected to which + audio fifo. The first integer selects i2s audio pin for the + first audio fifo#0 (HDMI channels 1&2), second for fifo#1 + (HDMI channels 3&4), and so on. There is 4 fifos and 4 i2s + pins (SD0 - SD3). Any i2s pin can be connected to any fifo, + but there can be no gaps. E.g. an i2s pin must be mapped to + fifo#0 and fifo#1 before mapping a channel to fifo#2. Default + value is <0>, describing SD0 pin beiging routed to hdmi audio + fifo #0. + - clocks: phandle and clock specifier for each clock listed in + the clock-names property + - clock-names: "mclk" + Describes SII902x MCLK input. MCLK is used to produce + HDMI audio CTS values. This property is required if + "#sound-dai-cells"-property is present. This property follows + Documentation/devicetree/bindings/clock/clock-bindings.txt + consumer binding. + + If HDMI audio is configured the sii902x device becomes an I2S + and/or spdif audio codec component (e.g a digital audio sink), + that can be used in configuring a full audio devices with + simple-card or audio-graph-card binding. See their binding + documents on how to describe the way the sii902x device is + connected to the rest of the audio system: + Documentation/devicetree/bindings/sound/simple-card.txt + Documentation/devicetree/bindings/sound/audio-graph-card.txt + Note: In case of the audio-graph-card binding the used port + index should be 3. + Optional subnodes: - video input: this subnode can contain a video input port node to connect the bridge to a display controller output (See this @@ -21,6 +55,12 @@ Example: compatible = "sil,sii9022"; reg = <0x39>; reset-gpios = <&pioA 1 0>; + + #sound-dai-cells = <0>; + sil,i2s-data-lanes = < 0 1 2 >; + clocks = <&mclk>; + clock-names = "mclk"; + ports { #address-cells = <1>; #size-cells = <0>; diff --git a/dts/Bindings/display/bridge/thine,thc63lvd1024.txt b/dts/Bindings/display/bridge/thine,thc63lvd1024.txt index 37f0c04d5a..d17d1e5820 100644 --- a/dts/Bindings/display/bridge/thine,thc63lvd1024.txt +++ b/dts/Bindings/display/bridge/thine,thc63lvd1024.txt @@ -28,6 +28,12 @@ Optional video port nodes: - port@1: Second LVDS input port - port@3: Second digital CMOS/TTL parallel output +The device can operate in single-link mode or dual-link mode. In single-link +mode, all pixels are received on port@0, and port@1 shall not contain any +endpoint. In dual-link mode, even-numbered pixels are received on port@0 and +odd-numbered pixels on port@1, and both port@0 and port@1 shall contain +endpoints. + Example: -------- diff --git a/dts/Bindings/display/bridge/toshiba,tc358767.txt b/dts/Bindings/display/bridge/toshiba,tc358767.txt index e3f6aa6a21..583c5e9dbe 100644 --- a/dts/Bindings/display/bridge/toshiba,tc358767.txt +++ b/dts/Bindings/display/bridge/toshiba,tc358767.txt @@ -12,6 +12,7 @@ Optional properties: (active high shutdown input) - reset-gpios: OF device-tree gpio specification for RSTX pin (active low system reset) + - toshiba,hpd-pin: TC358767 GPIO pin number to which HPD is connected to (0 or 1) - ports: the ports node can contain video interface port nodes to connect to a DPI/DSI source and to an eDP/DP sink according to [1][2]: - port@0: DSI input port diff --git a/dts/Bindings/display/ingenic,lcd.txt b/dts/Bindings/display/ingenic,lcd.txt new file mode 100644 index 0000000000..7b536c8c6d --- /dev/null +++ b/dts/Bindings/display/ingenic,lcd.txt @@ -0,0 +1,44 @@ +Ingenic JZ47xx LCD driver + +Required properties: +- compatible: one of: + * ingenic,jz4740-lcd + * ingenic,jz4725b-lcd +- reg: LCD registers location and length +- clocks: LCD pixclock and device clock specifiers. + The device clock is only required on the JZ4740. +- clock-names: "lcd_pclk" and "lcd" +- interrupts: Specifies the interrupt line the LCD controller is connected to. + +Example: + +panel { + compatible = "sharp,ls020b1dd01d"; + + backlight = <&backlight>; + power-supply = <&vcc>; + + port { + panel_input: endpoint { + remote-endpoint = <&panel_output>; + }; + }; +}; + + +lcd: lcd-controller@13050000 { + compatible = "ingenic,jz4725b-lcd"; + reg = <0x13050000 0x1000>; + + interrupt-parent = <&intc>; + interrupts = <31>; + + clocks = <&cgu JZ4725B_CLK_LCD>; + clock-names = "lcd"; + + port { + panel_output: endpoint { + remote-endpoint = <&panel_input>; + }; + }; +}; diff --git a/dts/Bindings/display/msm/dpu.txt b/dts/Bindings/display/msm/dpu.txt index ad2e883032..a61dd40f37 100644 --- a/dts/Bindings/display/msm/dpu.txt +++ b/dts/Bindings/display/msm/dpu.txt @@ -28,6 +28,11 @@ Required properties: - #address-cells: number of address cells for the MDSS children. Should be 1. - #size-cells: Should be 1. - ranges: parent bus address space is the same as the child bus address space. +- interconnects : interconnect path specifier for MDSS according to + Documentation/devicetree/bindings/interconnect/interconnect.txt. Should be + 2 paths corresponding to 2 AXI ports. +- interconnect-names : MDSS will have 2 port names to differentiate between the + 2 interconnect paths defined with interconnect specifier. Optional properties: - assigned-clocks: list of clock specifiers for clocks needing rate assignment @@ -86,6 +91,11 @@ Example: interrupt-controller; #interrupt-cells = <1>; + interconnects = <&rsc_hlos MASTER_MDP0 &rsc_hlos SLAVE_EBI1>, + <&rsc_hlos MASTER_MDP1 &rsc_hlos SLAVE_EBI1>; + + interconnect-names = "mdp0-mem", "mdp1-mem"; + iommus = <&apps_iommu 0>; #address-cells = <2>; diff --git a/dts/Bindings/display/msm/dsi.txt b/dts/Bindings/display/msm/dsi.txt index 9ae9469427..af95586c89 100644 --- a/dts/Bindings/display/msm/dsi.txt +++ b/dts/Bindings/display/msm/dsi.txt @@ -88,6 +88,7 @@ Required properties: * "qcom,dsi-phy-28nm-8960" * "qcom,dsi-phy-14nm" * "qcom,dsi-phy-10nm" + * "qcom,dsi-phy-10nm-8998" - reg: Physical base address and length of the registers of PLL, PHY. Some revisions require the PHY regulator base address, whereas others require the PHY lane base address. See below for each PHY revision. diff --git a/dts/Bindings/display/panel/armadeus,st0700-adapt.txt b/dts/Bindings/display/panel/armadeus,st0700-adapt.txt new file mode 100644 index 0000000000..a30d63db3c --- /dev/null +++ b/dts/Bindings/display/panel/armadeus,st0700-adapt.txt @@ -0,0 +1,9 @@ +Armadeus ST0700 Adapt. A Santek ST0700I5Y-RBSLW 7.0" WVGA (800x480) TFT with +an adapter board. + +Required properties: +- compatible: "armadeus,st0700-adapt" +- power-supply: see panel-common.txt + +Optional properties: +- backlight: see panel-common.txt diff --git a/dts/Bindings/display/panel/edt,et-series.txt b/dts/Bindings/display/panel/edt,et-series.txt index f56b99ebd9..be8684327e 100644 --- a/dts/Bindings/display/panel/edt,et-series.txt +++ b/dts/Bindings/display/panel/edt,et-series.txt @@ -6,6 +6,22 @@ Display bindings for EDT Display Technology Corp. Displays which are compatible with the simple-panel binding, which is specified in simple-panel.txt +3,5" QVGA TFT Panels +-------------------- ++-----------------+---------------------+-------------------------------------+ +| Identifier | compatbile | description | ++=================+=====================+=====================================+ +| ET035012DM6 | edt,et035012dm6 | 3.5" QVGA TFT LCD panel | ++-----------------+---------------------+-------------------------------------+ + +4,3" WVGA TFT Panels +-------------------- + ++-----------------+---------------------+-------------------------------------+ +| Identifier | compatbile | description | ++=================+=====================+=====================================+ +| ETM0430G0DH6 | edt,etm0430g0dh6 | 480x272 TFT Display | ++-----------------+---------------------+-------------------------------------+ 5,7" WVGA TFT Panels -------------------- diff --git a/dts/Bindings/display/panel/evervision,vgg804821.txt b/dts/Bindings/display/panel/evervision,vgg804821.txt new file mode 100644 index 0000000000..82d22e191a --- /dev/null +++ b/dts/Bindings/display/panel/evervision,vgg804821.txt @@ -0,0 +1,12 @@ +Evervision Electronics Co. Ltd. VGG804821 5.0" WVGA TFT LCD Panel + +Required properties: +- compatible: should be "evervision,vgg804821" +- power-supply: See simple-panel.txt + +Optional properties: +- backlight: See simple-panel.txt +- enable-gpios: See simple-panel.txt + +This binding is compatible with the simple-panel binding, which is specified +in simple-panel.txt in this directory. diff --git a/dts/Bindings/display/panel/friendlyarm,hd702e.txt b/dts/Bindings/display/panel/friendlyarm,hd702e.txt new file mode 100644 index 0000000000..6c9156fc34 --- /dev/null +++ b/dts/Bindings/display/panel/friendlyarm,hd702e.txt @@ -0,0 +1,32 @@ +FriendlyELEC HD702E 800x1280 LCD panel + +HD702E lcd is FriendlyELEC developed eDP LCD panel with 800x1280 +resolution. It has built in Goodix, GT9271 captive touchscreen +with backlight adjustable via PWM. + +Required properties: +- compatible: should be "friendlyarm,hd702e" +- power-supply: regulator to provide the supply voltage + +Optional properties: +- backlight: phandle of the backlight device attached to the panel + +Optional nodes: +- Video port for LCD panel input. + +This binding is compatible with the simple-panel binding, which is specified +in simple-panel.txt in this directory. + +Example: + + panel { + compatible ="friendlyarm,hd702e", "simple-panel"; + backlight = <&backlight>; + power-supply = <&vcc3v3_sys>; + + port { + panel_in_edp: endpoint { + remote-endpoint = <&edp_out_panel>; + }; + }; + }; diff --git a/dts/Bindings/display/panel/koe,tx14d24vm1bpa.txt b/dts/Bindings/display/panel/koe,tx14d24vm1bpa.txt new file mode 100644 index 0000000000..be7ac66680 --- /dev/null +++ b/dts/Bindings/display/panel/koe,tx14d24vm1bpa.txt @@ -0,0 +1,42 @@ +Kaohsiung Opto-Electronics Inc. 5.7" QVGA (320 x 240) TFT LCD panel + +Required properties: +- compatible: should be "koe,tx14d24vm1bpa" +- backlight: phandle of the backlight device attached to the panel +- power-supply: single regulator to provide the supply voltage + +Required nodes: +- port: Parallel port mapping to connect this display + +This panel needs single power supply voltage. Its backlight is conntrolled +via PWM signal. + +Example: +-------- + +Example device-tree definition when connected to iMX53 based board + + lcd_panel: lcd-panel { + compatible = "koe,tx14d24vm1bpa"; + backlight = <&backlight_lcd>; + power-supply = <®_3v3>; + + port { + lcd_panel_in: endpoint { + remote-endpoint = <&lcd_display_out>; + }; + }; + }; + +Then one needs to extend the dispX node: + + lcd_display: disp1 { + + port@1 { + reg = <1>; + + lcd_display_out: endpoint { + remote-endpoint = <&lcd_panel_in>; + }; + }; + }; diff --git a/dts/Bindings/display/panel/osddisplays,osd101t2045-53ts.txt b/dts/Bindings/display/panel/osddisplays,osd101t2045-53ts.txt new file mode 100644 index 0000000000..85c0b2cacf --- /dev/null +++ b/dts/Bindings/display/panel/osddisplays,osd101t2045-53ts.txt @@ -0,0 +1,11 @@ +One Stop Displays OSD101T2045-53TS 10.1" 1920x1200 panel + +Required properties: +- compatible: should be "osddisplays,osd101t2045-53ts" +- power-supply: as specified in the base binding + +Optional properties: +- backlight: as specified in the base binding + +This binding is compatible with the simple-panel binding, which is specified +in simple-panel.txt in this directory. diff --git a/dts/Bindings/display/panel/osddisplays,osd101t2587-53ts.txt b/dts/Bindings/display/panel/osddisplays,osd101t2587-53ts.txt new file mode 100644 index 0000000000..9d88e96003 --- /dev/null +++ b/dts/Bindings/display/panel/osddisplays,osd101t2587-53ts.txt @@ -0,0 +1,14 @@ +One Stop Displays OSD101T2587-53TS 10.1" 1920x1200 panel + +The panel is similar to OSD101T2045-53TS, but it needs additional +MIPI_DSI_TURN_ON_PERIPHERAL message from the host. + +Required properties: +- compatible: should be "osddisplays,osd101t2587-53ts" +- power-supply: as specified in the base binding + +Optional properties: +- backlight: as specified in the base binding + +This binding is compatible with the simple-panel binding, which is specified +in simple-panel.txt in this directory. diff --git a/dts/Bindings/display/panel/samsung,s6e63m0.txt b/dts/Bindings/display/panel/samsung,s6e63m0.txt new file mode 100644 index 0000000000..9fb9ebeef8 --- /dev/null +++ b/dts/Bindings/display/panel/samsung,s6e63m0.txt @@ -0,0 +1,33 @@ +Samsung s6e63m0 AMOLED LCD panel + +Required properties: + - compatible: "samsung,s6e63m0" + - reset-gpios: GPIO spec for reset pin + - vdd3-supply: VDD regulator + - vci-supply: VCI regulator + +The panel must obey rules for SPI slave device specified in document [1]. + +The device node can contain one 'port' child node with one child +'endpoint' node, according to the bindings defined in [2]. This +node should describe panel's video bus. + +[1]: Documentation/devicetree/bindings/spi/spi-bus.txt +[2]: Documentation/devicetree/bindings/media/video-interfaces.txt + +Example: + + s6e63m0: display@0 { + compatible = "samsung,s6e63m0"; + reg = <0>; + reset-gpio = <&mp05 5 1>; + vdd3-supply = <&ldo12_reg>; + vci-supply = <&ldo11_reg>; + spi-max-frequency = <1200000>; + + port { + lcd_ep: endpoint { + remote-endpoint = <&fimd_ep>; + }; + }; + }; diff --git a/dts/Bindings/display/panel/tfc,s9700rtwv43tr-01b.txt b/dts/Bindings/display/panel/tfc,s9700rtwv43tr-01b.txt new file mode 100644 index 0000000000..dfb572f085 --- /dev/null +++ b/dts/Bindings/display/panel/tfc,s9700rtwv43tr-01b.txt @@ -0,0 +1,15 @@ +TFC S9700RTWV43TR-01B 7" Three Five Corp 800x480 LCD panel with +resistive touch + +The panel is found on TI AM335x-evm. + +Required properties: +- compatible: should be "tfc,s9700rtwv43tr-01b" +- power-supply: See panel-common.txt + +Optional properties: +- enable-gpios: GPIO pin to enable or disable the panel, if there is one +- backlight: phandle of the backlight device attached to the panel + +This binding is compatible with the simple-panel binding, which is specified +in simple-panel.txt in this directory. diff --git a/dts/Bindings/display/panel/vl050_8048nt_c01.txt b/dts/Bindings/display/panel/vl050_8048nt_c01.txt new file mode 100644 index 0000000000..b42bf06bbd --- /dev/null +++ b/dts/Bindings/display/panel/vl050_8048nt_c01.txt @@ -0,0 +1,12 @@ +VXT 800x480 color TFT LCD panel + +Required properties: +- compatible: should be "vxt,vl050-8048nt-c01" +- power-supply: as specified in the base binding + +Optional properties: +- backlight: as specified in the base binding +- enable-gpios: as specified in the base binding + +This binding is compatible with the simple-panel binding, which is specified +in simple-panel.txt in this directory. diff --git a/dts/Bindings/display/renesas,du.txt b/dts/Bindings/display/renesas,du.txt index aedb22b4d1..c97dfacad2 100644 --- a/dts/Bindings/display/renesas,du.txt +++ b/dts/Bindings/display/renesas,du.txt @@ -7,6 +7,7 @@ Required Properties: - "renesas,du-r8a7744" for R8A7744 (RZ/G1N) compatible DU - "renesas,du-r8a7745" for R8A7745 (RZ/G1E) compatible DU - "renesas,du-r8a77470" for R8A77470 (RZ/G1C) compatible DU + - "renesas,du-r8a774a1" for R8A774A1 (RZ/G2M) compatible DU - "renesas,du-r8a774c0" for R8A774C0 (RZ/G2E) compatible DU - "renesas,du-r8a7779" for R8A7779 (R-Car H1) compatible DU - "renesas,du-r8a7790" for R8A7790 (R-Car H2) compatible DU @@ -58,6 +59,7 @@ corresponding to each DU output. R8A7744 (RZ/G1N) DPAD 0 LVDS 0 - - R8A7745 (RZ/G1E) DPAD 0 DPAD 1 - - R8A77470 (RZ/G1C) DPAD 0 DPAD 1 LVDS 0 - + R8A774A1 (RZ/G2M) DPAD 0 HDMI 0 LVDS 0 - R8A774C0 (RZ/G2E) DPAD 0 LVDS 0 LVDS 1 - R8A7779 (R-Car H1) DPAD 0 DPAD 1 - - R8A7790 (R-Car H2) DPAD 0 LVDS 0 LVDS 1 - diff --git a/dts/Bindings/display/rockchip/dw_hdmi-rockchip.txt b/dts/Bindings/display/rockchip/dw_hdmi-rockchip.txt index 39143424a4..3d32ce137e 100644 --- a/dts/Bindings/display/rockchip/dw_hdmi-rockchip.txt +++ b/dts/Bindings/display/rockchip/dw_hdmi-rockchip.txt @@ -12,6 +12,7 @@ following device-specific properties. Required properties: - compatible: should be one of the following: + "rockchip,rk3228-dw-hdmi" "rockchip,rk3288-dw-hdmi" "rockchip,rk3328-dw-hdmi" "rockchip,rk3399-dw-hdmi" @@ -38,6 +39,13 @@ Optional properties - phys: from general PHY binding: the phandle for the PHY device. - phy-names: Should be "hdmi" if phys references an external phy. +Optional pinctrl entry: +- If you have both a "unwedge" and "default" pinctrl entry, dw_hdmi + will switch to the unwedge pinctrl state for 10ms if it ever gets an + i2c timeout. It's intended that this unwedge pinctrl entry will + cause the SDA line to be driven low to work around a hardware + errata. + Example: hdmi: hdmi@ff980000 { diff --git a/dts/Bindings/display/simple-framebuffer.yaml b/dts/Bindings/display/simple-framebuffer.yaml index b052d76cf8..678776b601 100644 --- a/dts/Bindings/display/simple-framebuffer.yaml +++ b/dts/Bindings/display/simple-framebuffer.yaml @@ -126,6 +126,28 @@ required: # but usually they will be filled by the bootloader. - compatible +allOf: + - if: + properties: + compatible: + contains: + const: allwinner,simple-framebuffer + + then: + required: + - allwinner,pipeline + + - if: + properties: + compatible: + contains: + const: amlogic,simple-framebuffer + + then: + required: + - amlogic,pipeline + + additionalProperties: false examples: @@ -139,7 +161,8 @@ examples: #size-cells = <1>; stdout-path = "display0"; framebuffer0: framebuffer@1d385000 { - compatible = "simple-framebuffer"; + compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; + allwinner,pipeline = "de_be0-lcd0"; reg = <0x1d385000 3840000>; width = <1600>; height = <1200>; diff --git a/dts/Bindings/display/st,stm32-ltdc.txt b/dts/Bindings/display/st,stm32-ltdc.txt index 3eb1b48b47..60c54da4e5 100644 --- a/dts/Bindings/display/st,stm32-ltdc.txt +++ b/dts/Bindings/display/st,stm32-ltdc.txt @@ -40,6 +40,8 @@ Mandatory nodes specific to STM32 DSI: - panel or bridge node: A node containing the panel or bridge description as documented in [6]. - port: panel or bridge port node, connected to the DSI output port (port@1). +Optional properties: +- phy-dsi-supply: phandle of the regulator that provides the supply voltage. Note: You can find more documentation in the following references [1] Documentation/devicetree/bindings/clock/clock-bindings.txt @@ -101,6 +103,7 @@ Example 2: DSI panel clock-names = "pclk", "ref"; resets = <&rcc STM32F4_APB2_RESET(DSI)>; reset-names = "apb"; + phy-dsi-supply = <®18>; ports { #address-cells = <1>; diff --git a/dts/Bindings/display/sunxi/sun6i-dsi.txt b/dts/Bindings/display/sunxi/sun6i-dsi.txt deleted file mode 100644 index 6a6cf5de08..0000000000 --- a/dts/Bindings/display/sunxi/sun6i-dsi.txt +++ /dev/null @@ -1,93 +0,0 @@ -Allwinner A31 DSI Encoder -========================= - -The DSI pipeline consists of two separate blocks: the DSI controller -itself, and its associated D-PHY. - -DSI Encoder ------------ - -The DSI Encoder generates the DSI signal from the TCON's. - -Required properties: - - compatible: value must be one of: - * allwinner,sun6i-a31-mipi-dsi - - reg: base address and size of memory-mapped region - - interrupts: interrupt associated to this IP - - clocks: phandles to the clocks feeding the DSI encoder - * bus: the DSI interface clock - * mod: the DSI module clock - - clock-names: the clock names mentioned above - - phys: phandle to the D-PHY - - phy-names: must be "dphy" - - resets: phandle to the reset controller driving the encoder - - - ports: A ports node with endpoint definitions as defined in - Documentation/devicetree/bindings/media/video-interfaces.txt. The - first port should be the input endpoint, usually coming from the - associated TCON. - -Any MIPI-DSI device attached to this should be described according to -the bindings defined in ../mipi-dsi-bus.txt - -D-PHY ------ - -Required properties: - - compatible: value must be one of: - * allwinner,sun6i-a31-mipi-dphy - - reg: base address and size of memory-mapped region - - clocks: phandles to the clocks feeding the DSI encoder - * bus: the DSI interface clock - * mod: the DSI module clock - - clock-names: the clock names mentioned above - - resets: phandle to the reset controller driving the encoder - -Example: - -dsi0: dsi@1ca0000 { - compatible = "allwinner,sun6i-a31-mipi-dsi"; - reg = <0x01ca0000 0x1000>; - interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu CLK_BUS_MIPI_DSI>, - <&ccu CLK_DSI_SCLK>; - clock-names = "bus", "mod"; - resets = <&ccu RST_BUS_MIPI_DSI>; - phys = <&dphy0>; - phy-names = "dphy"; - #address-cells = <1>; - #size-cells = <0>; - - panel@0 { - compatible = "bananapi,lhr050h41", "ilitek,ili9881c"; - reg = <0>; - power-gpios = <&pio 1 7 GPIO_ACTIVE_HIGH>; /* PB07 */ - reset-gpios = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL05 */ - backlight = <&pwm_bl>; - }; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - - dsi0_in_tcon0: endpoint { - remote-endpoint = <&tcon0_out_dsi0>; - }; - }; - }; -}; - -dphy0: d-phy@1ca1000 { - compatible = "allwinner,sun6i-a31-mipi-dphy"; - reg = <0x01ca1000 0x1000>; - clocks = <&ccu CLK_BUS_MIPI_DSI>, - <&ccu CLK_DSI_DPHY>; - clock-names = "bus", "mod"; - resets = <&ccu RST_BUS_MIPI_DSI>; - #phy-cells = <0>; -}; diff --git a/dts/Bindings/dma/8250_mtk_dma.txt b/dts/Bindings/dma/8250_mtk_dma.txt deleted file mode 100644 index 3fe0961bcf..0000000000 --- a/dts/Bindings/dma/8250_mtk_dma.txt +++ /dev/null @@ -1,33 +0,0 @@ -* Mediatek UART APDMA Controller - -Required properties: -- compatible should contain: - * "mediatek,mt2712-uart-dma" for MT2712 compatible APDMA - * "mediatek,mt6577-uart-dma" for MT6577 and all of the above - -- reg: The base address of the APDMA register bank. - -- interrupts: A single interrupt specifier. - -- clocks : Must contain an entry for each entry in clock-names. - See ../clocks/clock-bindings.txt for details. -- clock-names: The APDMA clock for register accesses - -Examples: - - apdma: dma-controller@11000380 { - compatible = "mediatek,mt2712-uart-dma"; - reg = <0 0x11000380 0 0x400>; - interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_LOW>, - <GIC_SPI 64 IRQ_TYPE_LEVEL_LOW>, - <GIC_SPI 65 IRQ_TYPE_LEVEL_LOW>, - <GIC_SPI 66 IRQ_TYPE_LEVEL_LOW>, - <GIC_SPI 67 IRQ_TYPE_LEVEL_LOW>, - <GIC_SPI 68 IRQ_TYPE_LEVEL_LOW>, - <GIC_SPI 69 IRQ_TYPE_LEVEL_LOW>, - <GIC_SPI 70 IRQ_TYPE_LEVEL_LOW>; - clocks = <&pericfg CLK_PERI_AP_DMA>; - clock-names = "apdma"; - #dma-cells = <1>; - }; - diff --git a/dts/Bindings/dma/arm-pl330.txt b/dts/Bindings/dma/arm-pl330.txt index db7e2260f9..2c7fd1941a 100644 --- a/dts/Bindings/dma/arm-pl330.txt +++ b/dts/Bindings/dma/arm-pl330.txt @@ -16,6 +16,9 @@ Optional properties: - dma-channels: contains the total number of DMA channels supported by the DMAC - dma-requests: contains the total number of DMA requests supported by the DMAC - arm,pl330-broken-no-flushp: quirk for avoiding to execute DMAFLUSHP + - resets: contains an entry for each entry in reset-names. + See ../reset/reset.txt for details. + - reset-names: must contain at least "dma", and optional is "dma-ocp". Example: diff --git a/dts/Bindings/dma/fsl-edma.txt b/dts/Bindings/dma/fsl-edma.txt index 97e213e076..29dd3ccb12 100644 --- a/dts/Bindings/dma/fsl-edma.txt +++ b/dts/Bindings/dma/fsl-edma.txt @@ -9,15 +9,16 @@ group, DMAMUX0 or DMAMUX1, but not both. Required properties: - compatible : - "fsl,vf610-edma" for eDMA used similar to that on Vybrid vf610 SoC + - "fsl,imx7ulp-edma" for eDMA2 used similar to that on i.mx7ulp - reg : Specifies base physical address(s) and size of the eDMA registers. The 1st region is eDMA control register's address and size. The 2nd and the 3rd regions are programmable channel multiplexing control register's address and size. - interrupts : A list of interrupt-specifiers, one for each entry in - interrupt-names. -- interrupt-names : Should contain: - "edma-tx" - the transmission interrupt - "edma-err" - the error interrupt + interrupt-names on vf610 similar SoC. But for i.mx7ulp per channel + per transmission interrupt, total 16 channel interrupt and 1 + error interrupt(located in the last), no interrupt-names list on + i.mx7ulp for clean on dts. - #dma-cells : Must be <2>. The 1st cell specifies the DMAMUX(0 for DMAMUX0 and 1 for DMAMUX1). Specific request source can only be multiplexed by specific channels @@ -28,6 +29,7 @@ Required properties: - clock-names : A list of channel group clock names. Should contain: "dmamux0" - clock name of mux0 group "dmamux1" - clock name of mux1 group + Note: No dmamux0 on i.mx7ulp, but another 'dma' clk added on i.mx7ulp. - clocks : A list of phandle and clock-specifier pairs, one for each entry in clock-names. @@ -35,6 +37,10 @@ Optional properties: - big-endian: If present registers and hardware scatter/gather descriptors of the eDMA are implemented in big endian mode, otherwise in little mode. +- interrupt-names : Should contain the below on vf610 similar SoC but not used + on i.mx7ulp similar SoC: + "edma-tx" - the transmission interrupt + "edma-err" - the error interrupt Examples: @@ -52,8 +58,36 @@ edma0: dma-controller@40018000 { clock-names = "dmamux0", "dmamux1"; clocks = <&clks VF610_CLK_DMAMUX0>, <&clks VF610_CLK_DMAMUX1>; -}; +}; /* vf610 */ +edma1: dma-controller@40080000 { + #dma-cells = <2>; + compatible = "fsl,imx7ulp-edma"; + reg = <0x40080000 0x2000>, + <0x40210000 0x1000>; + dma-channels = <32>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, + /* last is eDMA2-ERR interrupt */ + <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "dma", "dmamux0"; + clocks = <&pcc2 IMX7ULP_CLK_DMA1>, + <&pcc2 IMX7ULP_CLK_DMA_MUX1>; +}; /* i.mx7ulp */ * DMA clients DMA client drivers that uses the DMA function must use the format described diff --git a/dts/Bindings/dma/fsl-qdma.txt b/dts/Bindings/dma/fsl-qdma.txt index 6a0ff9059e..da371c4d40 100644 --- a/dts/Bindings/dma/fsl-qdma.txt +++ b/dts/Bindings/dma/fsl-qdma.txt @@ -7,6 +7,7 @@ Required properties: - compatible: Must be one of "fsl,ls1021a-qdma": for LS1021A Board + "fsl,ls1028a-qdma": for LS1028A Board "fsl,ls1043a-qdma": for ls1043A Board "fsl,ls1046a-qdma": for ls1046A Board - reg: Should contain the register's base address and length. diff --git a/dts/Bindings/dma/mtk-uart-apdma.txt b/dts/Bindings/dma/mtk-uart-apdma.txt new file mode 100644 index 0000000000..5d6f98c43e --- /dev/null +++ b/dts/Bindings/dma/mtk-uart-apdma.txt @@ -0,0 +1,54 @@ +* Mediatek UART APDMA Controller + +Required properties: +- compatible should contain: + * "mediatek,mt2712-uart-dma" for MT2712 compatible APDMA + * "mediatek,mt6577-uart-dma" for MT6577 and all of the above + +- reg: The base address of the APDMA register bank. + +- interrupts: A single interrupt specifier. + One interrupt per dma-requests, or 8 if no dma-requests property is present + +- dma-requests: The number of DMA channels + +- clocks : Must contain an entry for each entry in clock-names. + See ../clocks/clock-bindings.txt for details. +- clock-names: The APDMA clock for register accesses + +- mediatek,dma-33bits: Present if the DMA requires support + +Examples: + + apdma: dma-controller@11000400 { + compatible = "mediatek,mt2712-uart-dma"; + reg = <0 0x11000400 0 0x80>, + <0 0x11000480 0 0x80>, + <0 0x11000500 0 0x80>, + <0 0x11000580 0 0x80>, + <0 0x11000600 0 0x80>, + <0 0x11000680 0 0x80>, + <0 0x11000700 0 0x80>, + <0 0x11000780 0 0x80>, + <0 0x11000800 0 0x80>, + <0 0x11000880 0 0x80>, + <0 0x11000900 0 0x80>, + <0 0x11000980 0 0x80>; + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 108 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 111 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 112 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 113 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 114 IRQ_TYPE_LEVEL_LOW>; + dma-requests = <12>; + clocks = <&pericfg CLK_PERI_AP_DMA>; + clock-names = "apdma"; + mediatek,dma-33bits; + #dma-cells = <1>; + }; diff --git a/dts/Bindings/dma/sun6i-dma.txt b/dts/Bindings/dma/sun6i-dma.txt index 7fccc20d83..cae31f4e77 100644 --- a/dts/Bindings/dma/sun6i-dma.txt +++ b/dts/Bindings/dma/sun6i-dma.txt @@ -28,12 +28,17 @@ Example: }; ------------------------------------------------------------------------------ -For A64 DMA controller: +For A64 and H6 DMA controller: Required properties: -- compatible: "allwinner,sun50i-a64-dma" +- compatible: Must be one of + "allwinner,sun50i-a64-dma" + "allwinner,sun50i-h6-dma" - dma-channels: Number of DMA channels supported by the controller. Refer to Documentation/devicetree/bindings/dma/dma.txt +- clocks: In addition to parent AHB clock, it should also contain mbus + clock (H6 only) +- clock-names: Should contain "bus" and "mbus" (H6 only) - all properties above, i.e. reg, interrupts, clocks, resets and #dma-cells Optional properties: diff --git a/dts/Bindings/extcon/extcon-fsa9480.txt b/dts/Bindings/extcon/extcon-fsa9480.txt new file mode 100644 index 0000000000..d592c21245 --- /dev/null +++ b/dts/Bindings/extcon/extcon-fsa9480.txt @@ -0,0 +1,19 @@ +FAIRCHILD SEMICONDUCTOR FSA9480 MICROUSB SWITCH + +The FSA9480 is a USB port accessory detector and switch. The FSA9480 is fully +controlled using I2C and enables USB data, stereo and mono audio, video, +microphone, and UART data to use a common connector port. + +Required properties: + - compatible : Must be "fcs,fsa9480" + - reg : Specifies i2c slave address. Must be 0x25. + - interrupts : Should contain one entry specifying interrupt signal of + interrupt parent to which interrupt pin of the chip is connected. + + Example: + musb@25 { + compatible = "fcs,fsa9480"; + reg = <0x25>; + interrupt-parent = <&gph2>; + interrupts = <7 0>; + }; diff --git a/dts/Bindings/firmware/intel,ixp4xx-network-processing-engine.yaml b/dts/Bindings/firmware/intel,ixp4xx-network-processing-engine.yaml index 8cb136c376..4f0db8ee22 100644 --- a/dts/Bindings/firmware/intel,ixp4xx-network-processing-engine.yaml +++ b/dts/Bindings/firmware/intel,ixp4xx-network-processing-engine.yaml @@ -2,7 +2,7 @@ # Copyright 2019 Linaro Ltd. %YAML 1.2 --- -$id: "http://devicetree.org/schemas/firmware/intel-ixp4xx-network-processing-engine.yaml#" +$id: "http://devicetree.org/schemas/firmware/intel,ixp4xx-network-processing-engine.yaml#" $schema: "http://devicetree.org/meta-schemas/core.yaml#" title: Intel IXP4xx Network Processing Engine diff --git a/dts/Bindings/gpio/gpio-davinci.txt b/dts/Bindings/gpio/gpio-davinci.txt index 553b92a7e8..bc6b4b62df 100644 --- a/dts/Bindings/gpio/gpio-davinci.txt +++ b/dts/Bindings/gpio/gpio-davinci.txt @@ -5,6 +5,7 @@ Required Properties: "ti,keystone-gpio": for Keystone 2 66AK2H/K, 66AK2L, 66AK2E SoCs "ti,k2g-gpio", "ti,keystone-gpio": for 66AK2G + "ti,am654-gpio", "ti,keystone-gpio": for TI K3 AM654 - reg: Physical base address of the controller and the size of memory mapped registers. @@ -145,3 +146,20 @@ gpio0: gpio@260bf00 { ti,ngpio = <32>; ti,davinci-gpio-unbanked = <32>; }; + +Example for K3 AM654: + +wkup_gpio0: wkup_gpio0@42110000 { + compatible = "ti,am654-gpio", "ti,keystone-gpio"; + reg = <0x42110000 0x100>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&intr_wkup_gpio>; + interrupts = <59 128>, <59 129>, <59 130>, <59 131>; + interrupt-controller; + #interrupt-cells = <2>; + ti,ngpio = <56>; + ti,davinci-gpio-unbanked = <0>; + clocks = <&k3_clks 59 0>; + clock-names = "gpio"; +}; diff --git a/dts/Bindings/gpio/pl061-gpio.txt b/dts/Bindings/gpio/pl061-gpio.txt deleted file mode 100644 index 89058d375b..0000000000 --- a/dts/Bindings/gpio/pl061-gpio.txt +++ /dev/null @@ -1,10 +0,0 @@ -ARM PL061 GPIO controller - -Required properties: -- compatible : "arm,pl061", "arm,primecell" -- #gpio-cells : Should be two. The first cell is the pin number and the - second cell is used to specify optional parameters: - - bit 0 specifies polarity (0 for normal, 1 for inverted) -- gpio-controller : Marks the device node as a GPIO controller. -- interrupts : Interrupt mapping for GPIO IRQ. -- gpio-ranges : Interaction with the PINCTRL subsystem. diff --git a/dts/Bindings/gpio/pl061-gpio.yaml b/dts/Bindings/gpio/pl061-gpio.yaml new file mode 100644 index 0000000000..313b172292 --- /dev/null +++ b/dts/Bindings/gpio/pl061-gpio.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpio/pl061-gpio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM PL061 GPIO controller + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + - Rob Herring <robh@kernel.org> + +# We need a select here so we don't match all nodes with 'arm,primecell' +select: + properties: + compatible: + contains: + const: arm,pl061 + required: + - compatible + +properties: + $nodename: + pattern: "^gpio@[0-9a-f]+$" + + compatible: + items: + - const: arm,pl061 + - const: arm,primecell + + reg: + maxItems: 1 + + interrupts: + oneOf: + - maxItems: 1 + - maxItems: 8 + + interrupt-controller: true + + "#interrupt-cells": + const: 2 + + clocks: + maxItems: 1 + + clock-names: true + + "#gpio-cells": + const: 2 + + gpio-controller: true + + gpio-ranges: + maxItems: 8 + +required: + - compatible + - reg + - interrupts + - interrupt-controller + - "#interrupt-cells" + - clocks + - "#gpio-cells" + - gpio-controller + +additionalProperties: false + +... diff --git a/dts/Bindings/gpu/arm,mali-midgard.txt b/dts/Bindings/gpu/arm,mali-midgard.txt index 1b1a741291..9b298edec5 100644 --- a/dts/Bindings/gpu/arm,mali-midgard.txt +++ b/dts/Bindings/gpu/arm,mali-midgard.txt @@ -15,7 +15,9 @@ Required properties: + "arm,mali-t860" + "arm,mali-t880" * which must be preceded by one of the following vendor specifics: + + "allwinner,sun50i-h6-mali" + "amlogic,meson-gxm-mali" + + "samsung,exynos5433-mali" + "rockchip,rk3288-mali" + "rockchip,rk3399-mali" @@ -31,21 +33,36 @@ Optional properties: - clocks : Phandle to clock for the Mali Midgard device. +- clock-names : Specify the names of the clocks specified in clocks + when multiple clocks are present. + * core: clock driving the GPU itself (When only one clock is present, + assume it's this clock.) + * bus: bus clock for the GPU + - mali-supply : Phandle to regulator for the Mali device. Refer to Documentation/devicetree/bindings/regulator/regulator.txt for details. - operating-points-v2 : Refer to Documentation/devicetree/bindings/opp/opp.txt for details. +- #cooling-cells: Refer to Documentation/devicetree/bindings/thermal/thermal.txt + for details. + - resets : Phandle of the GPU reset line. Vendor-specific bindings ------------------------ The Mali GPU is integrated very differently from one SoC to -another. In order to accomodate those differences, you have the option +another. In order to accommodate those differences, you have the option to specify one more vendor-specific compatible, among: +- "allwinner,sun50i-h6-mali" + Required properties: + - clocks : phandles to core and bus clocks + - clock-names : must contain "core" and "bus" + - resets: phandle to GPU reset line + - "amlogic,meson-gxm-mali" Required properties: - resets : Should contain phandles of : @@ -65,6 +82,7 @@ gpu@ffa30000 { mali-supply = <&vdd_gpu>; operating-points-v2 = <&gpu_opp_table>; power-domains = <&power RK3288_PD_GPU>; + #cooling-cells = <2>; }; gpu_opp_table: opp_table0 { diff --git a/dts/Bindings/gpu/arm,mali-utgard.txt b/dts/Bindings/gpu/arm,mali-utgard.txt index ae63f09fda..b352a6851a 100644 --- a/dts/Bindings/gpu/arm,mali-utgard.txt +++ b/dts/Bindings/gpu/arm,mali-utgard.txt @@ -17,6 +17,7 @@ Required properties: + amlogic,meson8b-mali + amlogic,meson-gxbb-mali + amlogic,meson-gxl-mali + + samsung,exynos4210-mali + rockchip,rk3036-mali + rockchip,rk3066-mali + rockchip,rk3188-mali diff --git a/dts/Bindings/hwlock/omap-hwspinlock.txt b/dts/Bindings/hwlock/omap-hwspinlock.txt index 2c9804f4f4..8d365f8969 100644 --- a/dts/Bindings/hwlock/omap-hwspinlock.txt +++ b/dts/Bindings/hwlock/omap-hwspinlock.txt @@ -1,12 +1,16 @@ -OMAP4+ HwSpinlock Driver -======================== +TI HwSpinlock for OMAP and K3 based SoCs +========================================= Required properties: -- compatible: Should be "ti,omap4-hwspinlock" for - OMAP44xx, OMAP54xx, AM33xx, AM43xx, DRA7xx SoCs +- compatible: Should be one of the following, + "ti,omap4-hwspinlock" for + OMAP44xx, OMAP54xx, AM33xx, AM43xx, DRA7xx SoCs + "ti,am654-hwspinlock" for + K3 AM65x and J721E SoCs - reg: Contains the hwspinlock module register address space (base address and length) - ti,hwmods: Name of the hwmod associated with the hwspinlock device + (for OMAP architecture based SoCs only) - #hwlock-cells: Should be 1. The OMAP hwspinlock users will use a 0-indexed relative hwlock number as the argument specifier value for requesting a specific hwspinlock @@ -17,10 +21,21 @@ Please look at the generic hwlock binding for usage information for consumers, Example: -/* OMAP4 */ +1. OMAP4 SoCs hwspinlock: spinlock@4a0f6000 { compatible = "ti,omap4-hwspinlock"; reg = <0x4a0f6000 0x1000>; ti,hwmods = "spinlock"; #hwlock-cells = <1>; }; + +2. AM65x SoCs and J721E SoCs +&cbass_main { + cbass_main_navss: interconnect0 { + hwspinlock: spinlock@30e00000 { + compatible = "ti,am654-hwspinlock"; + reg = <0x00 0x30e00000 0x00 0x1000>; + #hwlock-cells = <1>; + }; + }; +}; diff --git a/dts/Bindings/i2c/allwinner,sun6i-a31-p2wi.yaml b/dts/Bindings/i2c/allwinner,sun6i-a31-p2wi.yaml new file mode 100644 index 0000000000..f9d526b7da --- /dev/null +++ b/dts/Bindings/i2c/allwinner,sun6i-a31-p2wi.yaml @@ -0,0 +1,65 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/allwinner,sun6i-a31-p2wi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A31 P2WI (Push/Pull 2 Wires Interface) Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <maxime.ripard@bootlin.com> + +allOf: + - $ref: /schemas/i2c/i2c-controller.yaml# + +properties: + compatible: + const: allwinner,sun6i-a31-p2wi + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + resets: + maxItems: 1 + + clock-frequency: + minimum: 1 + maximum: 6000000 + +required: + - compatible + - reg + - interrupts + - clocks + - resets + +# FIXME: We should set it, but it would report all the generic +# properties as additional properties. +# additionalProperties: false + +examples: + - | + i2c@1f03400 { + compatible = "allwinner,sun6i-a31-p2wi"; + reg = <0x01f03400 0x400>; + interrupts = <0 39 4>; + clocks = <&apb0_gates 3>; + clock-frequency = <100000>; + resets = <&apb0_rst 3>; + #address-cells = <1>; + #size-cells = <0>; + + axp221: pmic@68 { + compatible = "x-powers,axp221"; + reg = <0x68>; + }; + }; + +... diff --git a/dts/Bindings/i2c/i2c-mt7621.txt b/dts/Bindings/i2c/i2c-mt7621.txt new file mode 100644 index 0000000000..bc36f0eb94 --- /dev/null +++ b/dts/Bindings/i2c/i2c-mt7621.txt @@ -0,0 +1,25 @@ +MediaTek MT7621/MT7628 I2C master controller + +Required properties: + +- compatible: Should be one of the following: + - "mediatek,mt7621-i2c": for MT7621/MT7628/MT7688 platforms +- #address-cells: should be 1. +- #size-cells: should be 0. +- reg: Address and length of the register set for the device +- resets: phandle to the reset controller asserting this device in + reset + See ../reset/reset.txt for details. + +Optional properties : + +Example: + +i2c: i2c@900 { + compatible = "mediatek,mt7621-i2c"; + reg = <0x900 0x100>; + #address-cells = <1>; + #size-cells = <0>; + resets = <&rstctrl 16>; + reset-names = "i2c"; +}; diff --git a/dts/Bindings/i2c/i2c-mv64xxx.txt b/dts/Bindings/i2c/i2c-mv64xxx.txt deleted file mode 100644 index 0ffe65a316..0000000000 --- a/dts/Bindings/i2c/i2c-mv64xxx.txt +++ /dev/null @@ -1,64 +0,0 @@ - -* Marvell MV64XXX I2C controller - -Required properties : - - - reg : Offset and length of the register set for the device - - compatible : Should be either: - - "allwinner,sun4i-a10-i2c" - - "allwinner,sun6i-a31-i2c" - - "marvell,mv64xxx-i2c" - - "marvell,mv78230-i2c" - - "marvell,mv78230-a0-i2c" - * Note: Only use "marvell,mv78230-a0-i2c" for a - very rare, initial version of the SoC which - had broken offload support. Linux - auto-detects this and sets it appropriately. - - interrupts : The interrupt number - -Optional properties : - - - clock-frequency : Desired I2C bus clock frequency in Hz. If not set the -default frequency is 100kHz - - - resets : phandle to the parent reset controller. Mandatory - whenever you're using the "allwinner,sun6i-a31-i2c" - compatible. - - - clocks: : pointers to the reference clocks for this device, the - first one is the one used for the clock on the i2c bus, - the second one is the clock used to acces the registers - of the controller - - - clock-names : names of used clocks, mandatory if the second clock is - used, the name must be "core", and "reg" (the latter is - only for Armada 7K/8K). - -Examples: - - i2c@11000 { - compatible = "marvell,mv64xxx-i2c"; - reg = <0x11000 0x20>; - interrupts = <29>; - clock-frequency = <100000>; - }; - -For the Armada XP: - - i2c@11000 { - compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c"; - reg = <0x11000 0x100>; - interrupts = <29>; - clock-frequency = <100000>; - }; - -For the Armada 7040: - - i2c@701000 { - compatible = "marvell,mv78230-i2c"; - reg = <0x701000 0x20>; - interrupts = <29>; - clock-frequency = <100000>; - clock-names = "core", "reg"; - clocks = <&core_clock>, <®_clock>; - }; diff --git a/dts/Bindings/i2c/i2c-ocores.txt b/dts/Bindings/i2c/i2c-ocores.txt index 17bef9a34e..6b25a80ae8 100644 --- a/dts/Bindings/i2c/i2c-ocores.txt +++ b/dts/Bindings/i2c/i2c-ocores.txt @@ -1,9 +1,13 @@ Device tree configuration for i2c-ocores Required properties: -- compatible : "opencores,i2c-ocores" or "aeroflexgaisler,i2cmst" +- compatible : "opencores,i2c-ocores" + "aeroflexgaisler,i2cmst" + "sifive,fu540-c000-i2c", "sifive,i2c0" + For Opencore based I2C IP block reimplemented in + FU540-C000 SoC. Please refer to sifive-blocks-ip-versioning.txt + for additional details. - reg : bus address start and address range size of device -- interrupts : interrupt number - clocks : handle to the controller clock; see the note below. Mutually exclusive with opencores,ip-clock-frequency - opencores,ip-clock-frequency: frequency of the controller clock in Hz; @@ -12,6 +16,7 @@ Required properties: - #size-cells : should be <0> Optional properties: +- interrupts : interrupt number. - clock-frequency : frequency of bus clock in Hz; see the note below. Defaults to 100 KHz when the property is not specified - reg-shift : device register offsets are shifted by this value diff --git a/dts/Bindings/i2c/i2c-omap.txt b/dts/Bindings/i2c/i2c-omap.txt index 4b90ba9f31..a44573d7c1 100644 --- a/dts/Bindings/i2c/i2c-omap.txt +++ b/dts/Bindings/i2c/i2c-omap.txt @@ -7,6 +7,7 @@ Required properties : "ti,omap3-i2c" for OMAP3 SoCs "ti,omap4-i2c" for OMAP4+ SoCs "ti,am654-i2c", "ti,omap4-i2c" for AM654 SoCs + "ti,j721e-i2c", "ti,omap4-i2c" for J721E SoCs - ti,hwmods : Must be "i2c<n>", n being the instance number (1-based) - #address-cells = <1>; - #size-cells = <0>; diff --git a/dts/Bindings/i2c/i2c-stm32.txt b/dts/Bindings/i2c/i2c-stm32.txt index f334738f7a..ce3df2fff6 100644 --- a/dts/Bindings/i2c/i2c-stm32.txt +++ b/dts/Bindings/i2c/i2c-stm32.txt @@ -21,6 +21,8 @@ Optional properties: 100000 and 400000. For STM32F7, STM32H7 and STM32MP1 SoCs, Standard-mode, Fast-mode and Fast-mode Plus are supported, possible values are 100000, 400000 and 1000000. +- dmas: List of phandles to rx and tx DMA channels. Refer to stm32-dma.txt. +- dma-names: List of dma names. Valid names are: "rx" and "tx". - i2c-scl-rising-time-ns: I2C SCL Rising time for the board (default: 25) For STM32F7, STM32H7 and STM32MP1 only. - i2c-scl-falling-time-ns: I2C SCL Falling time for the board (default: 10) diff --git a/dts/Bindings/i2c/i2c-sun6i-p2wi.txt b/dts/Bindings/i2c/i2c-sun6i-p2wi.txt deleted file mode 100644 index 49df005334..0000000000 --- a/dts/Bindings/i2c/i2c-sun6i-p2wi.txt +++ /dev/null @@ -1,41 +0,0 @@ - -* Allwinner P2WI (Push/Pull 2 Wire Interface) controller - -Required properties : - - - reg : Offset and length of the register set for the device. - - compatible : Should one of the following: - - "allwinner,sun6i-a31-p2wi" - - interrupts : The interrupt line connected to the P2WI peripheral. - - clocks : The gate clk connected to the P2WI peripheral. - - resets : The reset line connected to the P2WI peripheral. - -Optional properties : - - - clock-frequency : Desired P2WI bus clock frequency in Hz. If not set the -default frequency is 100kHz - -A P2WI may contain one child node encoding a P2WI slave device. - -Slave device properties: - Required properties: - - reg : the I2C slave address used during the initialization - process to switch from I2C to P2WI mode - -Example: - - p2wi@1f03400 { - compatible = "allwinner,sun6i-a31-p2wi"; - reg = <0x01f03400 0x400>; - interrupts = <0 39 4>; - clocks = <&apb0_gates 3>; - clock-frequency = <6000000>; - resets = <&apb0_rst 3>; - - axp221: pmic@68 { - compatible = "x-powers,axp221"; - reg = <0x68>; - - /* ... */ - }; - }; diff --git a/dts/Bindings/i2c/marvell,mv64xxx-i2c.yaml b/dts/Bindings/i2c/marvell,mv64xxx-i2c.yaml new file mode 100644 index 0000000000..001f2b7aba --- /dev/null +++ b/dts/Bindings/i2c/marvell,mv64xxx-i2c.yaml @@ -0,0 +1,124 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/marvell,mv64xxx-i2c.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell MV64XXX I2C Controller Device Tree Bindings + +maintainers: + - Gregory CLEMENT <gregory.clement@bootlin.com> + +properties: + compatible: + oneOf: + - const: allwinner,sun4i-a10-i2c + - items: + - const: allwinner,sun7i-a20-i2c + - const: allwinner,sun4i-a10-i2c + - const: allwinner,sun6i-a31-i2c + - items: + - const: allwinner,sun8i-a23-i2c + - const: allwinner,sun6i-a31-i2c + - items: + - const: allwinner,sun8i-a83t-i2c + - const: allwinner,sun6i-a31-i2c + - items: + - const: allwinner,sun50i-a64-i2c + - const: allwinner,sun6i-a31-i2c + + - const: marvell,mv64xxx-i2c + - const: marvell,mv78230-i2c + - const: marvell,mv78230-a0-i2c + + description: + Only use "marvell,mv78230-a0-i2c" for a very rare, initial + version of the SoC which had broken offload support. Linux + auto-detects this and sets it appropriately. + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + minItems: 1 + maxItems: 2 + items: + - description: Reference clock for the I2C bus + - description: Bus clock (Only for Armada 7K/8K) + + clock-names: + minItems: 1 + maxItems: 2 + items: + - const: core + - const: reg + description: + Mandatory if two clocks are used (only for Armada 7k and 8k). + + resets: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +allOf: + - $ref: /schemas/i2c/i2c-controller.yaml# + - if: + properties: + compatible: + contains: + enum: + - allwinner,sun4i-a10-i2c + - allwinner,sun6i-a31-i2c + + then: + required: + - clocks + + - if: + properties: + compatible: + contains: + const: allwinner,sun6i-a31-i2c + + then: + required: + - resets + +# FIXME: We should set it, but it would report all the generic +# properties as additional properties. +# additionalProperties: false + +examples: + - | + i2c@11000 { + compatible = "marvell,mv64xxx-i2c"; + reg = <0x11000 0x20>; + interrupts = <29>; + clock-frequency = <100000>; + }; + + - | + i2c@11000 { + compatible = "marvell,mv78230-i2c"; + reg = <0x11000 0x100>; + interrupts = <29>; + clock-frequency = <100000>; + }; + + - | + i2c@701000 { + compatible = "marvell,mv78230-i2c"; + reg = <0x701000 0x20>; + interrupts = <29>; + clock-frequency = <100000>; + clock-names = "core", "reg"; + clocks = <&core_clock>, <®_clock>; + }; + +... diff --git a/dts/Bindings/i3c/cdns,i3c-master.txt b/dts/Bindings/i3c/cdns,i3c-master.txt index 69da2115ab..1cf6182f88 100644 --- a/dts/Bindings/i3c/cdns,i3c-master.txt +++ b/dts/Bindings/i3c/cdns,i3c-master.txt @@ -38,6 +38,6 @@ Example: nunchuk: nunchuk@52 { compatible = "nintendo,nunchuk"; - reg = <0x52 0x80000010 0>; + reg = <0x52 0x0 0x10>; }; }; diff --git a/dts/Bindings/i3c/i3c.txt b/dts/Bindings/i3c/i3c.txt index ab729a0a86..4ffe059f0f 100644 --- a/dts/Bindings/i3c/i3c.txt +++ b/dts/Bindings/i3c/i3c.txt @@ -39,7 +39,9 @@ valid here, but several new properties have been added. New constraint on existing properties: -------------------------------------- - reg: contains 3 cells - + first cell : still encoding the I2C address + + first cell : still encoding the I2C address. 10 bit addressing is not + supported. Devices with 10 bit address can't be properly passed through + DEFSLVS command. + second cell: shall be 0 diff --git a/dts/Bindings/iio/accel/adi,adxl345.yaml b/dts/Bindings/iio/accel/adi,adxl345.yaml new file mode 100644 index 0000000000..c602b6fe1c --- /dev/null +++ b/dts/Bindings/iio/accel/adi,adxl345.yaml @@ -0,0 +1,72 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/accel/adi,adxl345.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices ADXL345/ADXL375 3-Axis Digital Accelerometers + +maintainers: + - Michael Hennerich <michael.hennerich@analog.com> + +description: | + Analog Devices ADXL345/ADXL375 3-Axis Digital Accelerometers that supports + both I2C & SPI interfaces. + http://www.analog.com/en/products/mems/accelerometers/adxl345.html + http://www.analog.com/en/products/sensors-mems/accelerometers/adxl375.html + +properties: + compatible: + enum: + - adi,adxl345 + - adi,adxl375 + + reg: + maxItems: 1 + + spi-cpha: true + + spi-cpol: true + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + /* Example for a I2C device node */ + accelerometer@2a { + compatible = "adi,adxl345"; + reg = <0x53>; + interrupt-parent = <&gpio0>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + spi0 { + #address-cells = <1>; + #size-cells = <0>; + + /* Example for a SPI device node */ + accelerometer@0 { + compatible = "adi,adxl345"; + reg = <0>; + spi-max-frequency = <5000000>; + spi-cpol; + spi-cpha; + interrupt-parent = <&gpio0>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + }; + }; diff --git a/dts/Bindings/iio/accel/adi,adxl372.yaml b/dts/Bindings/iio/accel/adi,adxl372.yaml new file mode 100644 index 0000000000..e7daffec88 --- /dev/null +++ b/dts/Bindings/iio/accel/adi,adxl372.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/accel/adi,adxl372.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices ADXL372 3-Axis, +/-(200g) Digital Accelerometer + +maintainers: + - Stefan Popa <stefan.popa@analog.com> + +description: | + Analog Devices ADXL372 3-Axis, +/-(200g) Digital Accelerometer that supports + both I2C & SPI interfaces + https://www.analog.com/en/products/adxl372.html + +properties: + compatible: + enum: + - adi,adxl372 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + /* Example for a I2C device node */ + accelerometer@53 { + compatible = "adi,adxl372"; + reg = <0x53>; + interrupt-parent = <&gpio>; + interrupts = <25 IRQ_TYPE_EDGE_FALLING>; + }; + }; + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + spi0 { + #address-cells = <1>; + #size-cells = <0>; + + accelerometer@0 { + compatible = "adi,adxl372"; + reg = <0>; + spi-max-frequency = <1000000>; + interrupt-parent = <&gpio>; + interrupts = <25 IRQ_TYPE_EDGE_FALLING>; + }; + }; diff --git a/dts/Bindings/iio/accel/adxl345.txt b/dts/Bindings/iio/accel/adxl345.txt deleted file mode 100644 index f9525f6e3d..0000000000 --- a/dts/Bindings/iio/accel/adxl345.txt +++ /dev/null @@ -1,39 +0,0 @@ -Analog Devices ADXL345/ADXL375 3-Axis Digital Accelerometers - -http://www.analog.com/en/products/mems/accelerometers/adxl345.html -http://www.analog.com/en/products/sensors-mems/accelerometers/adxl375.html - -Required properties: - - compatible : should be one of - "adi,adxl345" - "adi,adxl375" - - reg : the I2C address or SPI chip select number of the sensor - -Required properties for SPI bus usage: - - spi-max-frequency : set maximum clock frequency, must be 5000000 - - spi-cpol and spi-cpha : must be defined for adxl345 to enable SPI mode 3 - -Optional properties: - - interrupts: interrupt mapping for IRQ as documented in - Documentation/devicetree/bindings/interrupt-controller/interrupts.txt - -Example for a I2C device node: - - accelerometer@2a { - compatible = "adi,adxl345"; - reg = <0x53>; - interrupt-parent = <&gpio1>; - interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; - }; - -Example for a SPI device node: - - accelerometer@0 { - compatible = "adi,adxl345"; - reg = <0>; - spi-max-frequency = <5000000>; - spi-cpol; - spi-cpha; - interrupt-parent = <&gpio1>; - interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; - }; diff --git a/dts/Bindings/iio/accel/adxl372.txt b/dts/Bindings/iio/accel/adxl372.txt deleted file mode 100644 index a289964756..0000000000 --- a/dts/Bindings/iio/accel/adxl372.txt +++ /dev/null @@ -1,33 +0,0 @@ -Analog Devices ADXL372 3-Axis, +/-(200g) Digital Accelerometer - -http://www.analog.com/media/en/technical-documentation/data-sheets/adxl372.pdf - -Required properties: - - compatible : should be "adi,adxl372" - - reg: the I2C address or SPI chip select number for the device - -Required properties for SPI bus usage: - - spi-max-frequency: Max SPI frequency to use - -Optional properties: - - interrupts: interrupt mapping for IRQ as documented in - Documentation/devicetree/bindings/interrupt-controller/interrupts.txt - -Example for a I2C device node: - - accelerometer@53 { - compatible = "adi,adxl372"; - reg = <0x53>; - interrupt-parent = <&gpio>; - interrupts = <25 IRQ_TYPE_EDGE_FALLING>; - }; - -Example for a SPI device node: - - accelerometer@0 { - compatible = "adi,adxl372"; - reg = <0>; - spi-max-frequency = <1000000>; - interrupt-parent = <&gpio>; - interrupts = <25 IRQ_TYPE_EDGE_FALLING>; - }; diff --git a/dts/Bindings/iio/adc/adi,ad7124.txt b/dts/Bindings/iio/adc/adi,ad7124.txt deleted file mode 100644 index 416273dce5..0000000000 --- a/dts/Bindings/iio/adc/adi,ad7124.txt +++ /dev/null @@ -1,75 +0,0 @@ -Analog Devices AD7124 ADC device driver - -Required properties for the AD7124: - - compatible: Must be one of "adi,ad7124-4" or "adi,ad7124-8" - - reg: SPI chip select number for the device - - spi-max-frequency: Max SPI frequency to use - see: Documentation/devicetree/bindings/spi/spi-bus.txt - - clocks: phandle to the master clock (mclk) - see: Documentation/devicetree/bindings/clock/clock-bindings.txt - - clock-names: Must be "mclk". - - interrupts: IRQ line for the ADC - see: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt - - Required properties: - * #address-cells: Must be 1. - * #size-cells: Must be 0. - - Subnode(s) represent the external channels which are connected to the ADC. - Each subnode represents one channel and has the following properties: - Required properties: - * reg: The channel number. It can have up to 4 channels on ad7124-4 - and 8 channels on ad7124-8, numbered from 0 to 15. - * diff-channels: see: Documentation/devicetree/bindings/iio/adc/adc.txt - - Optional properties: - * bipolar: see: Documentation/devicetree/bindings/iio/adc/adc.txt - * adi,reference-select: Select the reference source to use when - converting on the the specific channel. Valid values are: - 0: REFIN1(+)/REFIN1(−). - 1: REFIN2(+)/REFIN2(−). - 3: AVDD - If this field is left empty, internal reference is selected. - -Optional properties: - - refin1-supply: refin1 supply can be used as reference for conversion. - - refin2-supply: refin2 supply can be used as reference for conversion. - - avdd-supply: avdd supply can be used as reference for conversion. - -Example: - adc@0 { - compatible = "adi,ad7124-4"; - reg = <0>; - spi-max-frequency = <5000000>; - interrupts = <25 2>; - interrupt-parent = <&gpio>; - refin1-supply = <&adc_vref>; - clocks = <&ad7124_mclk>; - clock-names = "mclk"; - - #address-cells = <1>; - #size-cells = <0>; - - channel@0 { - reg = <0>; - diff-channels = <0 1>; - adi,reference-select = <0>; - }; - - channel@1 { - reg = <1>; - bipolar; - diff-channels = <2 3>; - adi,reference-select = <0>; - }; - - channel@2 { - reg = <2>; - diff-channels = <4 5>; - }; - - channel@3 { - reg = <3>; - diff-channels = <6 7>; - }; - }; diff --git a/dts/Bindings/iio/adc/adi,ad7124.yaml b/dts/Bindings/iio/adc/adi,ad7124.yaml new file mode 100644 index 0000000000..9692b7f719 --- /dev/null +++ b/dts/Bindings/iio/adc/adi,ad7124.yaml @@ -0,0 +1,160 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2019 Analog Devices Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/bindings/iio/adc/adi,ad7124.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices AD7124 ADC device driver + +maintainers: + - Stefan Popa <stefan.popa@analog.com> + +description: | + Bindings for the Analog Devices AD7124 ADC device. Datasheet can be + found here: + https://www.analog.com/media/en/technical-documentation/data-sheets/AD7124-8.pdf + +properties: + compatible: + enum: + - adi,ad7124-4 + - adi,ad7124-8 + + reg: + description: SPI chip select number for the device + maxItems: 1 + + clocks: + maxItems: 1 + description: phandle to the master clock (mclk) + + clock-names: + items: + - const: mclk + + interrupts: + description: IRQ line for the ADC + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + refin1-supply: + description: refin1 supply can be used as reference for conversion. + maxItems: 1 + + refin2-supply: + description: refin2 supply can be used as reference for conversion. + maxItems: 1 + + avdd-supply: + description: avdd supply can be used as reference for conversion. + maxItems: 1 + +required: + - compatible + - reg + - clocks + - clock-names + - interrupts + +patternProperties: + "^channel@([0-9]|1[0-5])$": + type: object + description: | + Represents the external channels which are connected to the ADC. + See Documentation/devicetree/bindings/iio/adc/adc.txt. + + properties: + reg: + description: | + The channel number. It can have up to 8 channels on ad7124-4 + and 16 channels on ad7124-8, numbered from 0 to 15. + items: + minimum: 0 + maximum: 15 + + adi,reference-select: + description: | + Select the reference source to use when converting on + the specific channel. Valid values are: + 0: REFIN1(+)/REFIN1(−). + 1: REFIN2(+)/REFIN2(−). + 3: AVDD + If this field is left empty, internal reference is selected. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - enum: [0, 1, 3] + + diff-channels: + description: see Documentation/devicetree/bindings/iio/adc/adc.txt + items: + minimum: 0 + maximum: 15 + + bipolar: + description: see Documentation/devicetree/bindings/iio/adc/adc.txt + type: boolean + + adi,buffered-positive: + description: Enable buffered mode for positive input. + type: boolean + + adi,buffered-negative: + description: Enable buffered mode for negative input. + type: boolean + + required: + - reg + - diff-channels + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + adc@0 { + compatible = "adi,ad7124-4"; + reg = <0>; + spi-max-frequency = <5000000>; + interrupts = <25 2>; + interrupt-parent = <&gpio>; + refin1-supply = <&adc_vref>; + clocks = <&ad7124_mclk>; + clock-names = "mclk"; + + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + reg = <0>; + diff-channels = <0 1>; + adi,reference-select = <0>; + adi,buffered-positive; + }; + + channel@1 { + reg = <1>; + bipolar; + diff-channels = <2 3>; + adi,reference-select = <0>; + adi,buffered-positive; + adi,buffered-negative; + }; + + channel@2 { + reg = <2>; + diff-channels = <4 5>; + }; + + channel@3 { + reg = <3>; + diff-channels = <6 7>; + }; + }; + }; diff --git a/dts/Bindings/iio/adc/adi,ad7780.txt b/dts/Bindings/iio/adc/adi,ad7780.txt deleted file mode 100644 index 440e525553..0000000000 --- a/dts/Bindings/iio/adc/adi,ad7780.txt +++ /dev/null @@ -1,48 +0,0 @@ -* Analog Devices AD7170/AD7171/AD7780/AD7781 - -Data sheets: - -- AD7170: - * https://www.analog.com/media/en/technical-documentation/data-sheets/AD7170.pdf -- AD7171: - * https://www.analog.com/media/en/technical-documentation/data-sheets/AD7171.pdf -- AD7780: - * https://www.analog.com/media/en/technical-documentation/data-sheets/ad7780.pdf -- AD7781: - * https://www.analog.com/media/en/technical-documentation/data-sheets/AD7781.pdf - -Required properties: - -- compatible: should be one of - * "adi,ad7170" - * "adi,ad7171" - * "adi,ad7780" - * "adi,ad7781" -- reg: spi chip select number for the device -- vref-supply: the regulator supply for the ADC reference voltage - -Optional properties: - -- powerdown-gpios: must be the device tree identifier of the PDRST pin. If - specified, it will be asserted during driver probe. As the - line is active high, it should be marked GPIO_ACTIVE_HIGH. -- adi,gain-gpios: must be the device tree identifier of the GAIN pin. Only for - the ad778x chips. If specified, it will be asserted during - driver probe. As the line is active low, it should be marked - GPIO_ACTIVE_LOW. -- adi,filter-gpios: must be the device tree identifier of the FILTER pin. Only - for the ad778x chips. If specified, it will be asserted - during driver probe. As the line is active low, it should be - marked GPIO_ACTIVE_LOW. - -Example: - -adc@0 { - compatible = "adi,ad7780"; - reg = <0>; - vref-supply = <&vdd_supply> - - powerdown-gpios = <&gpio 12 GPIO_ACTIVE_HIGH>; - adi,gain-gpios = <&gpio 5 GPIO_ACTIVE_LOW>; - adi,filter-gpios = <&gpio 15 GPIO_ACTIVE_LOW>; -}; diff --git a/dts/Bindings/iio/adc/adi,ad7780.yaml b/dts/Bindings/iio/adc/adi,ad7780.yaml new file mode 100644 index 0000000000..d110941696 --- /dev/null +++ b/dts/Bindings/iio/adc/adi,ad7780.yaml @@ -0,0 +1,87 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/adi,ad7780.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices AD7170/AD7171/AD7780/AD7781 analog to digital converters + +maintainers: + - Michael Hennerich <michael.hennerich@analog.com> + +description: | + The ad7780 is a sigma-delta analog to digital converter. This driver provides + reading voltage values and status bits from both the ad778x and ad717x series. + Its interface also allows writing on the FILTER and GAIN GPIO pins on the + ad778x. + + Specifications on the converters can be found at: + AD7170: + https://www.analog.com/media/en/technical-documentation/data-sheets/AD7170.pdf + AD7171: + https://www.analog.com/media/en/technical-documentation/data-sheets/AD7171.pdf + AD7780: + https://www.analog.com/media/en/technical-documentation/data-sheets/ad7780.pdf + AD7781: + https://www.analog.com/media/en/technical-documentation/data-sheets/AD7781.pdf + +properties: + compatible: + enum: + - adi,ad7170 + - adi,ad7171 + - adi,ad7780 + - adi,ad7781 + + reg: + maxItems: 1 + + avdd-supply: + description: + The regulator supply for the ADC reference voltage. + maxItems: 1 + + powerdown-gpios: + description: + Must be the device tree identifier of the PDRST pin. If + specified, it will be asserted during driver probe. As the + line is active high, it should be marked GPIO_ACTIVE_HIGH. + maxItems: 1 + + adi,gain-gpios: + description: + Must be the device tree identifier of the GAIN pin. Only for + the ad778x chips. If specified, it will be asserted during + driver probe. As the line is active low, it should be marked + GPIO_ACTIVE_LOW. + maxItems: 1 + + adi,filter-gpios: + description: + Must be the device tree identifier of the FILTER pin. Only + for the ad778x chips. If specified, it will be asserted + during driver probe. As the line is active low, it should be + marked GPIO_ACTIVE_LOW. + maxItems: 1 + +required: + - compatible + - reg + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + spi0 { + #address-cells = <1>; + #size-cells = <0>; + + adc@0 { + compatible = "adi,ad7780"; + reg = <0>; + + avdd-supply = <&vdd_supply>; + powerdown-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; + adi,gain-gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; + adi,filter-gpios = <&gpio2 15 GPIO_ACTIVE_LOW>; + }; + }; diff --git a/dts/Bindings/iio/adc/avia-hx711.yaml b/dts/Bindings/iio/adc/avia-hx711.yaml index 8a4100ceea..d76ece97c7 100644 --- a/dts/Bindings/iio/adc/avia-hx711.yaml +++ b/dts/Bindings/iio/adc/avia-hx711.yaml @@ -61,6 +61,6 @@ examples: compatible = "avia,hx711"; sck-gpios = <&gpio3 10 GPIO_ACTIVE_HIGH>; dout-gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>; - avdd-suppy = <&avdd>; + avdd-supply = <&avdd>; clock-frequency = <100000>; }; diff --git a/dts/Bindings/iio/adc/mt6577_auxadc.txt b/dts/Bindings/iio/adc/mt6577_auxadc.txt index 0df9befdae..78c06e05c8 100644 --- a/dts/Bindings/iio/adc/mt6577_auxadc.txt +++ b/dts/Bindings/iio/adc/mt6577_auxadc.txt @@ -13,8 +13,10 @@ Required properties: - compatible: Should be one of: - "mediatek,mt2701-auxadc": For MT2701 family of SoCs - "mediatek,mt2712-auxadc": For MT2712 family of SoCs + - "mediatek,mt6765-auxadc": For MT6765 family of SoCs - "mediatek,mt7622-auxadc": For MT7622 family of SoCs - "mediatek,mt8173-auxadc": For MT8173 family of SoCs + - "mediatek,mt8183-auxadc", "mediatek,mt8173-auxadc": For MT8183 family of SoCs - reg: Address range of the AUXADC unit. - clocks: Should contain a clock specifier for each entry in clock-names - clock-names: Should contain "main". diff --git a/dts/Bindings/iio/adc/st,stm32-adc.txt b/dts/Bindings/iio/adc/st,stm32-adc.txt index 8346bcb04a..93a0bd2efc 100644 --- a/dts/Bindings/iio/adc/st,stm32-adc.txt +++ b/dts/Bindings/iio/adc/st,stm32-adc.txt @@ -38,6 +38,7 @@ Required properties: It's required on stm32h7. - clock-names: Must be "adc" and/or "bus" depending on part used. - interrupt-controller: Identifies the controller node as interrupt-parent +- vdda-supply: Phandle to the vdda input analog voltage. - vref-supply: Phandle to the vref input analog reference voltage. - #interrupt-cells = <1>; - #address-cells = <1>; diff --git a/dts/Bindings/iio/chemical/sensirion,sps30.txt b/dts/Bindings/iio/chemical/sensirion,sps30.txt deleted file mode 100644 index 6eee2709b5..0000000000 --- a/dts/Bindings/iio/chemical/sensirion,sps30.txt +++ /dev/null @@ -1,12 +0,0 @@ -* Sensirion SPS30 particulate matter sensor - -Required properties: -- compatible: must be "sensirion,sps30" -- reg: the I2C address of the sensor - -Example: - -sps30@69 { - compatible = "sensirion,sps30"; - reg = <0x69>; -}; diff --git a/dts/Bindings/iio/chemical/sensirion,sps30.yaml b/dts/Bindings/iio/chemical/sensirion,sps30.yaml new file mode 100644 index 0000000000..50a50a0d70 --- /dev/null +++ b/dts/Bindings/iio/chemical/sensirion,sps30.yaml @@ -0,0 +1,39 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/chemical/sensirion,sps30.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sensirion SPS30 particulate matter sensor + +maintainers: + - Tomasz Duszynski <tduszyns@gmail.com> + +description: | + Air pollution sensor capable of measuring mass concentration of dust + particles. + +properties: + compatible: + enum: + - sensirion,sps30 + reg: + maxItems: 1 + +required: + - compatible + - reg + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + air-pollution-sensor@69 { + compatible = "sensirion,sps30"; + reg = <0x69>; + }; + }; + +... diff --git a/dts/Bindings/iio/frequency/adf4371.yaml b/dts/Bindings/iio/frequency/adf4371.yaml new file mode 100644 index 0000000000..7ec3ec9435 --- /dev/null +++ b/dts/Bindings/iio/frequency/adf4371.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/frequency/adf4371.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices ADF4371/ADF4372 Wideband Synthesizers + +maintainers: + - Popa Stefan <stefan.popa@analog.com> + +description: | + Analog Devices ADF4371/ADF4372 SPI Wideband Synthesizers + https://www.analog.com/media/en/technical-documentation/data-sheets/adf4371.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/adf4372.pdf + +properties: + compatible: + enum: + - adi,adf4371 + - adi,adf4372 + + reg: + maxItems: 1 + + clocks: + description: + Definition of the external clock (see clock/clock-bindings.txt) + maxItems: 1 + + clock-names: + description: + Must be "clkin" + maxItems: 1 + + adi,mute-till-lock-en: + type: boolean + description: + If this property is present, then the supply current to RF8P and RF8N + output stage will shut down until the ADF4371/ADF4372 achieves lock as + measured by the digital lock detect circuitry. + +required: + - compatible + - reg + - clocks + - clock-names + +examples: + - | + spi0 { + #address-cells = <1>; + #size-cells = <0>; + + frequency@0 { + compatible = "adi,adf4371"; + reg = <0>; + spi-max-frequency = <1000000>; + clocks = <&adf4371_clkin>; + clock-names = "clkin"; + }; + }; +... diff --git a/dts/Bindings/iio/light/isl29018.txt b/dts/Bindings/iio/light/isl29018.txt deleted file mode 100644 index b9bbde3e13..0000000000 --- a/dts/Bindings/iio/light/isl29018.txt +++ /dev/null @@ -1,27 +0,0 @@ -* ISL 29018/29023/29035 I2C ALS, Proximity, and Infrared sensor - -Required properties: - - - compatible: Should be one of - "isil,isl29018" - "isil,isl29023" - "isil,isl29035" - - reg: the I2C address of the device - -Optional properties: - - - interrupts: the sole interrupt generated by the device - - Refer to interrupt-controller/interrupts.txt for generic interrupt client - node bindings. - - - vcc-supply: phandle to the regulator that provides power to the sensor. - -Example: - -isl29018@44 { - compatible = "isil,isl29018"; - reg = <0x44>; - interrupt-parent = <&gpio>; - interrupts = <TEGRA_GPIO(Z, 2) IRQ_TYPE_LEVEL_HIGH>; -}; diff --git a/dts/Bindings/iio/light/isl29018.yaml b/dts/Bindings/iio/light/isl29018.yaml new file mode 100644 index 0000000000..cbb00be8f3 --- /dev/null +++ b/dts/Bindings/iio/light/isl29018.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/light/isl29018.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: | + Intersil 29018/29023/29035 Ambient Light, Infrared Light, and Proximity Sensor + +maintainers: + - Brian Masney <masneyb@onstation.org> + +description: | + Ambient and infrared light sensing with proximity detection over an i2c + interface. + + https://www.renesas.com/us/en/www/doc/datasheet/isl29018.pdf + https://www.renesas.com/us/en/www/doc/datasheet/isl29023.pdf + https://www.renesas.com/us/en/www/doc/datasheet/isl29035.pdf + +properties: + compatible: + enum: + - isil,isl29018 + - isil,isl29023 + - isil,isl29035 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + vcc-supply: + description: Regulator that provides power to the sensor + +required: + - compatible + - reg + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + + #address-cells = <1>; + #size-cells = <0>; + + sensor@44 { + compatible = "isil,isl29018"; + reg = <0x44>; + interrupts-extended = <&msmgpio 61 IRQ_TYPE_LEVEL_HIGH>; + }; + }; +... diff --git a/dts/Bindings/iio/light/tsl2583.txt b/dts/Bindings/iio/light/tsl2583.txt deleted file mode 100644 index 059dffa182..0000000000 --- a/dts/Bindings/iio/light/tsl2583.txt +++ /dev/null @@ -1,25 +0,0 @@ -* TAOS TSL 2580/2581/2583 ALS sensor - -Required properties: - - - compatible: Should be one of - "amstaos,tsl2580" - "amstaos,tsl2581" - "amstaos,tsl2583" - - reg: the I2C address of the device - -Optional properties: - - - interrupts: the sole interrupt generated by the device - - Refer to interrupt-controller/interrupts.txt for generic interrupt client - node bindings. - - - vcc-supply: phandle to the regulator that provides power to the sensor. - -Example: - -tsl2581@29 { - compatible = "amstaos,tsl2581"; - reg = <0x29>; -}; diff --git a/dts/Bindings/iio/light/tsl2583.yaml b/dts/Bindings/iio/light/tsl2583.yaml new file mode 100644 index 0000000000..e86ef64ecf --- /dev/null +++ b/dts/Bindings/iio/light/tsl2583.yaml @@ -0,0 +1,46 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/light/tsl2583.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: AMS/TAOS Ambient Light Sensor (ALS) + +maintainers: + - Brian Masney <masneyb@onstation.org> + +description: | + Ambient light sensing with an i2c interface. + +properties: + compatible: + enum: + - amstaos,tsl2580 + - amstaos,tsl2581 + - amstaos,tsl2583 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + vcc-supply: + description: Regulator that provides power to the sensor + +required: + - compatible + - reg + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + light-sensor@29 { + compatible = "amstaos,tsl2581"; + reg = <0x29>; + }; + }; +... diff --git a/dts/Bindings/iio/light/tsl2772.txt b/dts/Bindings/iio/light/tsl2772.txt deleted file mode 100644 index 1c5e6f17a1..0000000000 --- a/dts/Bindings/iio/light/tsl2772.txt +++ /dev/null @@ -1,42 +0,0 @@ -* AMS/TAOS ALS and proximity sensor - -Required properties: - - - compatible: Should be one of - "amstaos,tsl2571" - "amstaos,tsl2671" - "amstaos,tmd2671" - "amstaos,tsl2771" - "amstaos,tmd2771" - "amstaos,tsl2572" - "amstaos,tsl2672" - "amstaos,tmd2672" - "amstaos,tsl2772" - "amstaos,tmd2772" - "avago,apds9930" - - reg: the I2C address of the device - -Optional properties: - - - amstaos,proximity-diodes - proximity diodes to enable. <0>, <1>, or <0 1> - are the only valid values. - - led-max-microamp - current for the proximity LED. Must be 100000, 50000, - 25000, or 13000. - - vdd-supply: phandle to the regulator that provides power to the sensor. - - vddio-supply: phandle to the regulator that provides power to the bus. - - interrupts: the sole interrupt generated by the device - - Refer to interrupt-controller/interrupts.txt for generic interrupt client - node bindings. - -Example: - -tsl2772@39 { - compatible = "amstaos,tsl2772"; - reg = <0x39>; - interrupts-extended = <&msmgpio 61 IRQ_TYPE_EDGE_FALLING>; - vdd-supply = <&pm8941_l17>; - vddio-supply = <&pm8941_lvs1>; - amstaos,proximity-diodes = <0>; - led-max-microamp = <100000>; -}; diff --git a/dts/Bindings/iio/light/tsl2772.yaml b/dts/Bindings/iio/light/tsl2772.yaml new file mode 100644 index 0000000000..ed2c3d5ead --- /dev/null +++ b/dts/Bindings/iio/light/tsl2772.yaml @@ -0,0 +1,83 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/light/tsl2772.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: AMS/TAOS Ambient Light Sensor (ALS) and Proximity Detector + +maintainers: + - Brian Masney <masneyb@onstation.org> + +description: | + Ambient light sensing and proximity detection with an i2c interface. + https://ams.com/documents/20143/36005/TSL2772_DS000181_2-00.pdf + +properties: + compatible: + enum: + - amstaos,tsl2571 + - amstaos,tsl2671 + - amstaos,tmd2671 + - amstaos,tsl2771 + - amstaos,tmd2771 + - amstaos,tsl2572 + - amstaos,tsl2672 + - amstaos,tmd2672 + - amstaos,tsl2772 + - amstaos,tmd2772 + - avago,apds9930 + + reg: + maxItems: 1 + + amstaos,proximity-diodes: + description: Proximity diodes to enable + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + - minItems: 1 + maxItems: 2 + items: + minimum: 0 + maximum: 1 + + interrupts: + maxItems: 1 + + led-max-microamp: + description: Current for the proximity LED + enum: + - 13000 + - 25000 + - 50000 + - 100000 + + vdd-supply: + description: Regulator that provides power to the sensor + + vddio-supply: + description: Regulator that provides power to the bus + +required: + - compatible + - reg + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + sensor@39 { + compatible = "amstaos,tsl2772"; + reg = <0x39>; + interrupts-extended = <&msmgpio 61 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&pm8941_l17>; + vddio-supply = <&pm8941_lvs1>; + amstaos,proximity-diodes = <0>; + led-max-microamp = <100000>; + }; + }; +... diff --git a/dts/Bindings/input/elan_i2c.txt b/dts/Bindings/input/elan_i2c.txt index 7976074607..9963247706 100644 --- a/dts/Bindings/input/elan_i2c.txt +++ b/dts/Bindings/input/elan_i2c.txt @@ -13,9 +13,20 @@ Optional properties: pinctrl binding [1]). - vcc-supply: a phandle for the regulator supplying 3.3V power. - elan,trackpoint: touchpad can support a trackpoint (boolean) +- elan,clickpad: touchpad is a clickpad (the entire surface is a button) +- elan,middle-button: touchpad has a physical middle button +- elan,x_traces: number of antennas on the x axis +- elan,y_traces: number of antennas on the y axis +- some generic touchscreen properties [2]: + * touchscreen-size-x + * touchscreen-size-y + * touchscreen-x-mm + * touchscreen-y-mm + [0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt [1]: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt +[2]: Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt Example: &i2c1 { diff --git a/dts/Bindings/input/sun4i-lradc-keys.txt b/dts/Bindings/input/sun4i-lradc-keys.txt index 496125c6bf..507b737612 100644 --- a/dts/Bindings/input/sun4i-lradc-keys.txt +++ b/dts/Bindings/input/sun4i-lradc-keys.txt @@ -5,6 +5,7 @@ Required properties: - compatible: should be one of the following string: "allwinner,sun4i-a10-lradc-keys" "allwinner,sun8i-a83t-r-lradc" + "allwinner,sun50i-a64-lradc", "allwinner,sun8i-a83t-r-lradc" - reg: mmio address range of the chip - interrupts: interrupt to which the chip is connected - vref-supply: powersupply for the lradc reference voltage diff --git a/dts/Bindings/interrupt-controller/amazon,al-fic.txt b/dts/Bindings/interrupt-controller/amazon,al-fic.txt new file mode 100644 index 0000000000..c676b03c75 --- /dev/null +++ b/dts/Bindings/interrupt-controller/amazon,al-fic.txt @@ -0,0 +1,27 @@ +Amazon's Annapurna Labs Fabric Interrupt Controller + +Required properties: + +- compatible: should be "amazon,al-fic" +- reg: physical base address and size of the registers +- interrupt-controller: identifies the node as an interrupt controller +- #interrupt-cells : must be 2. Specifies the number of cells needed to encode + an interrupt source. Supported trigger types are low-to-high edge + triggered and active high level-sensitive. +- interrupts: describes which input line in the interrupt parent, this + fic's output is connected to. This field property depends on the parent's + binding + +Please refer to interrupts.txt in this directory for details of the common +Interrupt Controllers bindings used by client devices. + +Example: + +amazon_fic: interrupt-controller@fd8a8500 { + compatible = "amazon,al-fic"; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x0 0xfd8a8500 0x0 0x1000>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 0x0 IRQ_TYPE_LEVEL_HIGH>; +}; diff --git a/dts/Bindings/interrupt-controller/amlogic,meson-gpio-intc.txt b/dts/Bindings/interrupt-controller/amlogic,meson-gpio-intc.txt index 1502a51548..7d531d5fff 100644 --- a/dts/Bindings/interrupt-controller/amlogic,meson-gpio-intc.txt +++ b/dts/Bindings/interrupt-controller/amlogic,meson-gpio-intc.txt @@ -15,6 +15,7 @@ Required properties: "amlogic,meson-gxbb-gpio-intc" for GXBB SoCs (S905) or "amlogic,meson-gxl-gpio-intc" for GXL SoCs (S905X, S912) "amlogic,meson-axg-gpio-intc" for AXG SoCs (A113D, A113X) + "amlogic,meson-g12a-gpio-intc" for G12A SoCs (S905D2, S905X2, S905Y2) - reg : Specifies base physical address and size of the registers. - interrupt-controller : Identifies the node as an interrupt controller. - #interrupt-cells : Specifies the number of cells needed to encode an diff --git a/dts/Bindings/interrupt-controller/csky,mpintc.txt b/dts/Bindings/interrupt-controller/csky,mpintc.txt index ab921f1698..e134053551 100644 --- a/dts/Bindings/interrupt-controller/csky,mpintc.txt +++ b/dts/Bindings/interrupt-controller/csky,mpintc.txt @@ -6,11 +6,16 @@ C-SKY Multi-processors Interrupt Controller is designed for ck807/ck810/ck860 SMP soc, and it also could be used in non-SMP system. Interrupt number definition: - 0-15 : software irq, and we use 15 as our IPI_IRQ. 16-31 : private irq, and we use 16 as the co-processor timer. 31-1024: common irq for soc ip. +Interrupt triger mode: (Defined in dt-bindings/interrupt-controller/irq.h) + IRQ_TYPE_LEVEL_HIGH (default) + IRQ_TYPE_LEVEL_LOW + IRQ_TYPE_EDGE_RISING + IRQ_TYPE_EDGE_FALLING + ============================= intc node bindings definition ============================= @@ -26,15 +31,22 @@ intc node bindings definition - #interrupt-cells Usage: required Value type: <u32> - Definition: must be <1> + Definition: <2> - interrupt-controller: Usage: required -Examples: +Examples: ("interrupts = <irq_num IRQ_TYPE_XXX>") --------- +#include <dt-bindings/interrupt-controller/irq.h> intc: interrupt-controller { compatible = "csky,mpintc"; - #interrupt-cells = <1>; + #interrupt-cells = <2>; interrupt-controller; }; + + device: device-example { + ... + interrupts = <34 IRQ_TYPE_EDGE_RISING>; + interrupt-parent = <&intc>; + }; diff --git a/dts/Bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml b/dts/Bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml index bae10e261f..507c141ea7 100644 --- a/dts/Bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml +++ b/dts/Bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml @@ -2,7 +2,7 @@ # Copyright 2018 Linaro Ltd. %YAML 1.2 --- -$id: "http://devicetree.org/schemas/interrupt/intel-ixp4xx-interrupt.yaml#" +$id: "http://devicetree.org/schemas/interrupt-controller/intel,ixp4xx-interrupt.yaml#" $schema: "http://devicetree.org/meta-schemas/core.yaml#" title: Intel IXP4xx XScale Networking Processors Interrupt Controller diff --git a/dts/Bindings/interrupt-controller/renesas,rza1-irqc.txt b/dts/Bindings/interrupt-controller/renesas,rza1-irqc.txt new file mode 100644 index 0000000000..727b7e4cd6 --- /dev/null +++ b/dts/Bindings/interrupt-controller/renesas,rza1-irqc.txt @@ -0,0 +1,43 @@ +DT bindings for the Renesas RZ/A1 Interrupt Controller + +The RZ/A1 Interrupt Controller is a front-end for the GIC found on Renesas +RZ/A1 and RZ/A2 SoCs: + - IRQ sense select for 8 external interrupts, 1:1-mapped to 8 GIC SPI + interrupts, + - NMI edge select. + +Required properties: + - compatible: Must be "renesas,<soctype>-irqc", and "renesas,rza1-irqc" as + fallback. + Examples with soctypes are: + - "renesas,r7s72100-irqc" (RZ/A1H) + - "renesas,r7s9210-irqc" (RZ/A2M) + - #interrupt-cells: Must be 2 (an interrupt index and flags, as defined + in interrupts.txt in this directory) + - #address-cells: Must be zero + - interrupt-controller: Marks the device as an interrupt controller + - reg: Base address and length of the memory resource used by the interrupt + controller + - interrupt-map: Specifies the mapping from external interrupts to GIC + interrupts + - interrupt-map-mask: Must be <7 0> + +Example: + + irqc: interrupt-controller@fcfef800 { + compatible = "renesas,r7s72100-irqc", "renesas,rza1-irqc"; + #interrupt-cells = <2>; + #address-cells = <0>; + interrupt-controller; + reg = <0xfcfef800 0x6>; + interrupt-map = + <0 0 &gic GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <1 0 &gic GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <2 0 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <3 0 &gic GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <4 0 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <5 0 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, + <6 0 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <7 0 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map-mask = <7 0>; + }; diff --git a/dts/Bindings/ipmi/npcm7xx-kcs-bmc.txt b/dts/Bindings/ipmi/npcm7xx-kcs-bmc.txt index 3538a214ff..352f5e9c75 100644 --- a/dts/Bindings/ipmi/npcm7xx-kcs-bmc.txt +++ b/dts/Bindings/ipmi/npcm7xx-kcs-bmc.txt @@ -36,4 +36,4 @@ Example: kcs_chan = <2>; status = "disabled"; }; - };
\ No newline at end of file + }; diff --git a/dts/Bindings/leds/backlight/lm3630a-backlight.yaml b/dts/Bindings/leds/backlight/lm3630a-backlight.yaml index 4d61fe0a98..dc129d9a32 100644 --- a/dts/Bindings/leds/backlight/lm3630a-backlight.yaml +++ b/dts/Bindings/leds/backlight/lm3630a-backlight.yaml @@ -23,16 +23,17 @@ properties: reg: maxItems: 1 - ti,linear-mapping-mode: - description: | - Enable linear mapping mode. If disabled, then it will use exponential - mapping mode in which the ramp up/down appears to have a more uniform - transition to the human eye. - type: boolean + '#address-cells': + const: 1 + + '#size-cells': + const: 0 required: - compatible - reg + - '#address-cells' + - '#size-cells' patternProperties: "^led@[01]$": @@ -48,7 +49,6 @@ patternProperties: in this property. The two current sinks can be controlled independently with both banks, or bank A can be configured to control both sinks with the led-sources property. - maxItems: 1 minimum: 0 maximum: 1 @@ -73,6 +73,13 @@ patternProperties: minimum: 0 maximum: 255 + ti,linear-mapping-mode: + description: | + Enable linear mapping mode. If disabled, then it will use exponential + mapping mode in which the ramp up/down appears to have a more uniform + transition to the human eye. + type: boolean + required: - reg diff --git a/dts/Bindings/leds/leds-lm36274.txt b/dts/Bindings/leds/leds-lm36274.txt new file mode 100644 index 0000000000..39c230d59a --- /dev/null +++ b/dts/Bindings/leds/leds-lm36274.txt @@ -0,0 +1,85 @@ +* Texas Instruments LM36274 4-Channel LCD Backlight Driver w/Integrated Bias + +The LM36274 is an integrated four-channel WLED driver and LCD bias supply. +The backlight boost provides the power to bias four parallel LED strings with +up to 29V total output voltage. The 11-bit LED current is programmable via +the I2C bus and/or controlled via a logic level PWM input from 60 uA to 30 mA. + +Parent device properties are documented in +Documentation/devicetree/bindings/mfd/ti-lmu.txt + +Regulator properties are documented in +Documentation/devicetree/bindings/regulator/lm363x-regulator.txt + +Required backlight properties: + - compatible: + "ti,lm36274-backlight" + - reg : 0 + - #address-cells : 1 + - #size-cells : 0 + - led-sources : Indicates which LED strings will be enabled. + Values from 0-3, sources is 0 based so strings will be + source value + 1. + +Optional backlight properties: + - label : see Documentation/devicetree/bindings/leds/common.txt + - linux,default-trigger : + see Documentation/devicetree/bindings/leds/common.txt + +Example: + +HVLED string 1 and 3 are controlled by control bank A and HVLED 2 string is +controlled by control bank B. + +lm36274@11 { + compatible = "ti,lm36274"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x11>; + + enable-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>; + + regulators { + #address-cells = <1>; + #size-cells = <0>; + compatible = "ti,lm363x-regulator"; + + enable-gpios = <&pioC 0 GPIO_ACTIVE_HIGH>, + <&pioC 1 GPIO_ACTIVE_HIGH>; + + vboost { + regulator-name = "lcd_boost"; + regulator-min-microvolt = <4000000>; + regulator-max-microvolt = <7150000>; + regulator-always-on; + }; + + vpos { + regulator-name = "lcd_vpos"; + regulator-min-microvolt = <4000000>; + regulator-max-microvolt = <6500000>; + }; + + vneg { + regulator-name = "lcd_vneg"; + regulator-min-microvolt = <4000000>; + regulator-max-microvolt = <6500000>; + }; + }; + + backlight { + #address-cells = <1>; + #size-cells = <0>; + compatible = "ti,lm36274-backlight"; + + led@0 { + reg = <0>; + led-sources = <0 2>; + label = "white:backlight_cluster"; + linux,default-trigger = "backlight"; + }; + }; +}; + +For more product information please see the link below: +http://www.ti.com/lit/ds/symlink/lm36274.pdf diff --git a/dts/Bindings/leds/leds-lm3697.txt b/dts/Bindings/leds/leds-lm3697.txt new file mode 100644 index 0000000000..63992d7329 --- /dev/null +++ b/dts/Bindings/leds/leds-lm3697.txt @@ -0,0 +1,73 @@ +* Texas Instruments - LM3697 Highly Efficient White LED Driver + +The LM3697 11-bit LED driver provides high- +performance backlight dimming for 1, 2, or 3 series +LED strings while delivering up to 90% efficiency. + +This device is suitable for display and keypad lighting + +Required properties: + - compatible: + "ti,lm3697" + - reg : I2C slave address + - #address-cells : 1 + - #size-cells : 0 + +Optional properties: + - enable-gpios : GPIO pin to enable/disable the device + - vled-supply : LED supply + +Required child properties: + - reg : 0 - LED is Controlled by bank A + 1 - LED is Controlled by bank B + - led-sources : Indicates which HVLED string is associated to which + control bank. This is a zero based property so + HVLED1 = 0, HVLED2 = 1, HVLED3 = 2. + Additional information is contained + in Documentation/devicetree/bindings/leds/common.txt + +Optional child properties: + - ti,brightness-resolution - see Documentation/devicetree/bindings/mfd/ti-lmu.txt + - ramp-up-us: see Documentation/devicetree/bindings/mfd/ti-lmu.txt + - ramp-down-us: see Documentation/devicetree/bindings/mfd/ti-lmu.txt + - label : see Documentation/devicetree/bindings/leds/common.txt + - linux,default-trigger : + see Documentation/devicetree/bindings/leds/common.txt + +Example: + +HVLED string 1 and 3 are controlled by control bank A and HVLED 2 string is +controlled by control bank B. + +led-controller@36 { + compatible = "ti,lm3697"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x36>; + + enable-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>; + vled-supply = <&vbatt>; + + led@0 { + reg = <0>; + led-sources = <0 2>; + ti,brightness-resolution = <2047>; + ramp-up-us = <5000>; + ramp-down-us = <1000>; + label = "white:first_backlight_cluster"; + linux,default-trigger = "backlight"; + }; + + led@1 { + reg = <1>; + led-sources = <1>; + ti,brightness-resolution = <255>; + ramp-up-us = <500>; + ramp-down-us = <1000>; + label = "white:second_backlight_cluster"; + linux,default-trigger = "backlight"; + }; +} + +For more product information please see the link below: +http://www.ti.com/lit/ds/symlink/lm3697.pdf diff --git a/dts/Bindings/leds/leds-spi-byte.txt b/dts/Bindings/leds/leds-spi-byte.txt new file mode 100644 index 0000000000..28b6b2d909 --- /dev/null +++ b/dts/Bindings/leds/leds-spi-byte.txt @@ -0,0 +1,44 @@ +* Single Byte SPI LED Device Driver. + +The driver can be used for controllers with a very simple SPI protocol: +- one LED is controlled by a single byte on MOSI +- the value of the byte gives the brightness between two values (lowest to + highest) +- no return value is necessary (no MISO signal) + +The value for lowest and highest brightness is dependent on the device and +therefore on the compatible string. + +Depending on the compatible string some special functions (like hardware +accelerated blinking) might can be supported too. + +The driver currently only supports one LED. The properties of the LED are +configured in a sub-node in the device node. + +Required properties: +- compatible: should be one of + * "ubnt,acb-spi-led" microcontroller (SONiX 8F26E611LA) based device + used for example in Ubiquiti airCube ISP + +Property rules described in Documentation/devicetree/bindings/spi/spi-bus.txt +apply. + +LED sub-node properties: +- label: + see Documentation/devicetree/bindings/leds/common.txt +- default-state: + see Documentation/devicetree/bindings/leds/common.txt + Only "on" and "off" are supported. + +Example: + +led-controller@0 { + compatible = "ubnt,acb-spi-led"; + reg = <0>; + spi-max-frequency = <100000>; + + led { + label = "white:status"; + default-state = "on"; + }; +}; diff --git a/dts/Bindings/mailbox/omap-mailbox.txt b/dts/Bindings/mailbox/omap-mailbox.txt index 0ef372656a..35c3f56b7f 100644 --- a/dts/Bindings/mailbox/omap-mailbox.txt +++ b/dts/Bindings/mailbox/omap-mailbox.txt @@ -1,4 +1,4 @@ -OMAP2+ Mailbox Driver +OMAP2+ and K3 Mailbox ===================== The OMAP mailbox hardware facilitates communication between different processors @@ -7,7 +7,7 @@ various processor subsystems and is connected on an interconnect bus. The communication is achieved through a set of registers for message storage and interrupt configuration registers. -Each mailbox IP block has a certain number of h/w fifo queues and output +Each mailbox IP block/cluster has a certain number of h/w fifo queues and output interrupt lines. An output interrupt line is routed to an interrupt controller within a processor subsystem, and there can be more than one line going to a specific processor's interrupt controller. The interrupt line connections are @@ -23,12 +23,16 @@ All the current OMAP SoCs except for the newest DRA7xx SoC has a single IP instance. DRA7xx has multiple instances with different number of h/w fifo queues and interrupt lines between different instances. The interrupt lines can also be routed to different processor sub-systems on DRA7xx as they are routed through -the Crossbar, a kind of interrupt router/multiplexer. +the Crossbar, a kind of interrupt router/multiplexer. The K3 AM65x and J721E +SoCs has each of these instances form a cluster and combine multiple clusters +into a single IP block present within the Main NavSS. The interrupt lines from +all these clusters are multiplexed and routed to different processor subsystems +over a limited number of common interrupt output lines of an Interrupt Router. Mailbox Device Node: ==================== -A Mailbox device node is used to represent a Mailbox IP instance within a SoC. -The sub-mailboxes are represented as child nodes of this parent node. +A Mailbox device node is used to represent a Mailbox IP instance/cluster within +a SoC. The sub-mailboxes are represented as child nodes of this parent node. Required properties: -------------------- @@ -37,12 +41,12 @@ Required properties: "ti,omap3-mailbox" for OMAP3430, OMAP3630 SoCs "ti,omap4-mailbox" for OMAP44xx, OMAP54xx, AM33xx, AM43xx and DRA7xx SoCs + "ti,am654-mailbox" for K3 AM65x and J721E SoCs - reg: Contains the mailbox register address range (base address and length) - interrupts: Contains the interrupt information for the mailbox device. The format is dependent on which interrupt - controller the OMAP device uses -- ti,hwmods: Name of the hwmod associated with the mailbox + controller the Mailbox device uses - #mbox-cells: Common mailbox binding property to identify the number of cells required for the mailbox specifier. Should be 1 @@ -50,6 +54,23 @@ Required properties: device can interrupt - ti,mbox-num-fifos: Number of h/w fifo queues within the mailbox IP block +SoC-specific Required properties: +--------------------------------- +The following are mandatory properties for the OMAP architecture based SoCs +only: +- ti,hwmods: Name of the hwmod associated with the mailbox. This + should be defined in the mailbox node only if the node + is not defined as a child node of a corresponding sysc + interconnect node. + +The following are mandatory properties for the K3 AM65x and J721E SoCs only: +- interrupt-parent: Should contain a phandle to the TI-SCI interrupt + controller node that is used to dynamically program + the interrupt routes between the IP and the main GIC + controllers. See the following binding for additional + details, + Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.txt + Child Nodes: ============ A child node is used for representing the actual sub-mailbox device that is @@ -98,7 +119,7 @@ to be used by the client user. Example: -------- -/* OMAP4 */ +1. /* OMAP4 */ mailbox: mailbox@4a0f4000 { compatible = "ti,omap4-mailbox"; reg = <0x4a0f4000 0x200>; @@ -123,7 +144,7 @@ dsp { ... }; -/* AM33xx */ +2. /* AM33xx */ mailbox: mailbox@480c8000 { compatible = "ti,omap4-mailbox"; reg = <0x480C8000 0x200>; @@ -137,3 +158,23 @@ mailbox: mailbox@480c8000 { ti,mbox-rx = <0 0 3>; }; }; + +3. /* AM65x */ +&cbass_main { + cbass_main_navss: interconnect0 { + mailbox0_cluster0: mailbox@31f80000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f80000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&intr_main_navss>; + interrupts = <164 0>; + + mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 { + ti,mbox-tx = <1 0 0>; + ti,mbox-rx = <0 0 0>; + }; + }; + }; +}; diff --git a/dts/Bindings/media/allegro.txt b/dts/Bindings/media/allegro.txt new file mode 100644 index 0000000000..a92e2fbf26 --- /dev/null +++ b/dts/Bindings/media/allegro.txt @@ -0,0 +1,43 @@ +Device-tree bindings for the Allegro DVT video IP codecs present in the Xilinx +ZynqMP SoC. The IP core may either be a H.264/H.265 encoder or H.264/H.265 +decoder ip core. + +Each actual codec engines is controlled by a microcontroller (MCU). Host +software uses a provided mailbox interface to communicate with the MCU. The +MCU share an interrupt. + +Required properties: + - compatible: value should be one of the following + "allegro,al5e-1.1", "allegro,al5e": encoder IP core + "allegro,al5d-1.1", "allegro,al5d": decoder IP core + - reg: base and length of the memory mapped register region and base and + length of the memory mapped sram + - reg-names: must include "regs" and "sram" + - interrupts: shared interrupt from the MCUs to the processing system + - clocks: must contain an entry for each entry in clock-names + - clock-names: must include "core_clk", "mcu_clk", "m_axi_core_aclk", + "m_axi_mcu_aclk", "s_axi_lite_aclk" + +Example: + al5e: video-codec@a0009000 { + compatible = "allegro,al5e-1.1", "allegro,al5e"; + reg = <0 0xa0009000 0 0x1000>, + <0 0xa0000000 0 0x8000>; + reg-names = "regs", "sram"; + interrupts = <0 96 4>; + clocks = <&xlnx_vcu 0>, <&xlnx_vcu 1>, + <&clkc 71>, <&clkc 71>, <&clkc 71>; + clock-names = "core_clk", "mcu_clk", "m_axi_core_aclk", + "m_axi_mcu_aclk", "s_axi_lite_aclk" + }; + al5d: video-codec@a0029000 { + compatible = "allegro,al5d-1.1", "allegro,al5d"; + reg = <0 0xa0029000 0 0x1000>, + <0 0xa0020000 0 0x8000>; + reg-names = "regs", "sram"; + interrupts = <0 96 4>; + clocks = <&xlnx_vcu 2>, <&xlnx_vcu 3>, + <&clkc 71>, <&clkc 71>, <&clkc 71>; + clock-names = "core_clk", "mcu_clk", "m_axi_core_aclk", + "m_axi_mcu_aclk", "s_axi_lite_aclk" + }; diff --git a/dts/Bindings/media/amlogic,vdec.txt b/dts/Bindings/media/amlogic,vdec.txt new file mode 100644 index 0000000000..aabdd01bcf --- /dev/null +++ b/dts/Bindings/media/amlogic,vdec.txt @@ -0,0 +1,71 @@ +Amlogic Video Decoder +================================ + +The video decoding IP lies within the DOS memory region, +except for the hardware bitstream parser that makes use of an undocumented +region. + +It makes use of the following blocks: + +- ESPARSER is a bitstream parser that outputs to a VIFIFO. Further VDEC blocks +then feed from this VIFIFO. +- VDEC_1 can decode MPEG-1, MPEG-2, MPEG-4 part 2, MJPEG, H.263, H.264, VC-1. +- VDEC_HEVC can decode HEVC and VP9. + +Both VDEC_1 and VDEC_HEVC share the "vdec" IRQ and as such cannot run +concurrently. + +Device Tree Bindings: +--------------------- + +VDEC: Video Decoder +-------------------------- + +Required properties: +- compatible: value should be different for each SoC family as : + - GXBB (S905) : "amlogic,gxbb-vdec" + - GXL (S905X, S905D) : "amlogic,gxl-vdec" + - GXM (S912) : "amlogic,gxm-vdec" +- reg: base address and size of he following memory-mapped regions : + - dos + - esparser +- reg-names: should contain the names of the previous memory regions +- interrupts: should contain the following IRQs: + - vdec + - esparser +- interrupt-names: should contain the names of the previous interrupts +- amlogic,ao-sysctrl: should point to the AOBUS sysctrl node +- amlogic,canvas: should point to a canvas provider node +- clocks: should contain the following clocks : + - dos_parser + - dos + - vdec_1 + - vdec_hevc +- clock-names: should contain the names of the previous clocks +- resets: should contain the parser reset +- reset-names: should be "esparser" + +Example: + +vdec: video-decoder@c8820000 { + compatible = "amlogic,gxbb-vdec"; + reg = <0x0 0xc8820000 0x0 0x10000>, + <0x0 0xc110a580 0x0 0xe4>; + reg-names = "dos", "esparser"; + + interrupts = <GIC_SPI 44 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "vdec", "esparser"; + + amlogic,ao-sysctrl = <&sysctrl_AO>; + amlogic,canvas = <&canvas>; + + clocks = <&clkc CLKID_DOS_PARSER>, + <&clkc CLKID_DOS>, + <&clkc CLKID_VDEC_1>, + <&clkc CLKID_VDEC_HEVC>; + clock-names = "dos_parser", "dos", "vdec_1", "vdec_hevc"; + + resets = <&reset RESET_PARSER>; + reset-names = "esparser"; +}; diff --git a/dts/Bindings/media/imx7-csi.txt b/dts/Bindings/media/imx7-csi.txt index 3c07bc676b..443aef0735 100644 --- a/dts/Bindings/media/imx7-csi.txt +++ b/dts/Bindings/media/imx7-csi.txt @@ -14,8 +14,7 @@ Required properties: - interrupts : should contain CSI interrupt; - clocks : list of clock specifiers, see Documentation/devicetree/bindings/clock/clock-bindings.txt for details; -- clock-names : must contain "axi", "mclk" and "dcic" entries, matching - entries in the clock property; +- clock-names : must contain "mclk"; The device node shall contain one 'port' child node with one child 'endpoint' node, according to the bindings defined in: @@ -32,10 +31,8 @@ example: compatible = "fsl,imx7-csi"; reg = <0x30710000 0x10000>; interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_CLK_DUMMY>, - <&clks IMX7D_CSI_MCLK_ROOT_CLK>, - <&clks IMX7D_CLK_DUMMY>; - clock-names = "axi", "mclk", "dcic"; + clocks = <&clks IMX7D_CSI_MCLK_ROOT_CLK>; + clock-names = "mclk"; port { csi_from_csi_mux: endpoint { diff --git a/dts/Bindings/media/marvell,mmp2-ccic.txt b/dts/Bindings/media/marvell,mmp2-ccic.txt new file mode 100644 index 0000000000..7ec2c8c8a3 --- /dev/null +++ b/dts/Bindings/media/marvell,mmp2-ccic.txt @@ -0,0 +1,50 @@ +Marvell MMP2 camera host interface + +Required properties: + - compatible: Should be "marvell,mmp2-ccic". + - reg: Register base and size. + - interrupts: The interrupt number. + - #clock-cells: Must be 0. + +Optional properties: + - clocks: Reference to the input clock as specified by + Documentation/devicetree/bindings/clock/clock-bindings.txt. + - clock-names: Names of the clocks used; "axi" for the AXI bus interface, + "func" for the peripheral clock and "phy" for the parallel + video bus interface. + - clock-output-names: Optional clock source for sensors. Shall be "mclk". + +Required subnodes: + - port: The parallel bus interface port with a single endpoint linked to + the sensor's endpoint as described in + Documentation/devicetree/bindings/media/video-interfaces.txt. + +Required endpoint properties: + - bus-type: data bus type, <5> or <6> for Parallel or Bt.656 respectively + - pclk-sample: pixel clock polarity + - hsync-active: horizontal synchronization polarity (only required for + parallel bus) + - vsync-active: vertical synchronization polarity (only required for + parallel bus) + +Example: + + camera0: camera@d420a000 { + compatible = "marvell,mmp2-ccic"; + reg = <0xd420a000 0x800>; + interrupts = <42>; + clocks = <&soc_clocks MMP2_CLK_CCIC0>; + clock-names = "axi"; + #clock-cells = <0>; + clock-output-names = "mclk"; + + port { + camera0_0: endpoint { + remote-endpoint = <&ov7670_0>; + bus-type = <5>; /* Parallel */ + hsync-active = <1>; /* Active high */ + vsync-active = <1>; /* Active high */ + pclk-sample = <0>; /* Falling */ + }; + }; + }; diff --git a/dts/Bindings/media/st,stm32-dcmi.txt b/dts/Bindings/media/st,stm32-dcmi.txt index 249790a930..3122ded82e 100644 --- a/dts/Bindings/media/st,stm32-dcmi.txt +++ b/dts/Bindings/media/st,stm32-dcmi.txt @@ -11,7 +11,7 @@ Required properties: - clock-names: must contain "mclk", which is the DCMI peripherial clock - pinctrl: the pincontrol settings to configure muxing properly for pins that connect to DCMI device. - See Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt. + See Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml. - dmas: phandle to DMA controller node, see Documentation/devicetree/bindings/dma/stm32-dma.txt - dma-names: must contain "tx", which is the transmit channel from DCMI to DMA diff --git a/dts/Bindings/media/sun6i-csi.txt b/dts/Bindings/media/sun6i-csi.txt index 0dd540bb03..a2e3e56f02 100644 --- a/dts/Bindings/media/sun6i-csi.txt +++ b/dts/Bindings/media/sun6i-csi.txt @@ -6,6 +6,7 @@ Allwinner V3s SoC features a CSI module(CSI1) with parallel interface. Required properties: - compatible: value must be one of: * "allwinner,sun6i-a31-csi" + * "allwinner,sun8i-a83t-csi" * "allwinner,sun8i-h3-csi" * "allwinner,sun8i-v3s-csi" * "allwinner,sun50i-a64-csi" diff --git a/dts/Bindings/memory-controllers/ingenic,jz4780-nemc.txt b/dts/Bindings/memory-controllers/ingenic,jz4780-nemc.txt index f936b5589b..59b8dcc118 100644 --- a/dts/Bindings/memory-controllers/ingenic,jz4780-nemc.txt +++ b/dts/Bindings/memory-controllers/ingenic,jz4780-nemc.txt @@ -5,6 +5,7 @@ controller in Ingenic JZ4780 Required properties: - compatible: Should be set to one of: + "ingenic,jz4740-nemc" (JZ4740) "ingenic,jz4780-nemc" (JZ4780) - reg: Should specify the NEMC controller registers location and length. - clocks: Clock for the NEMC controller. diff --git a/dts/Bindings/mfd/atmel-usart.txt b/dts/Bindings/mfd/atmel-usart.txt index 7f0cd72f47..699fd3c9ac 100644 --- a/dts/Bindings/mfd/atmel-usart.txt +++ b/dts/Bindings/mfd/atmel-usart.txt @@ -17,17 +17,24 @@ Required properties for USART in SPI mode: - cs-gpios: chipselects (internal cs not supported) - atmel,usart-mode : Must be <AT91_USART_MODE_SPI> (found in dt-bindings/mfd/at91-usart.h) +Optional properties in serial and SPI mode: +- dma bindings for dma transfer: + - dmas: DMA specifier, consisting of a phandle to DMA controller node, + memory peripheral interface and USART DMA channel ID, FIFO configuration. + The order of DMA channels is fixed. The first DMA channel must be TX + associated channel and the second one must be RX associated channel. + Refer to dma.txt and atmel-dma.txt for details. + - dma-names: "tx" for TX channel. + "rx" for RX channel. + The order of dma-names is also fixed. The first name must be "tx" + and the second one must be "rx" as in the examples below. + Optional properties in serial mode: - atmel,use-dma-rx: use of PDC or DMA for receiving data - atmel,use-dma-tx: use of PDC or DMA for transmitting data - {rts,cts,dtr,dsr,rng,dcd}-gpios: specify a GPIO for RTS/CTS/DTR/DSR/RI/DCD line respectively. It will use specified PIO instead of the peripheral function pin for the USART feature. If unsure, don't specify this property. -- add dma bindings for dma transfer: - - dmas: DMA specifier, consisting of a phandle to DMA controller node, - memory peripheral interface and USART DMA channel ID, FIFO configuration. - Refer to dma.txt and atmel-dma.txt for details. - - dma-names: "rx" for RX channel, "tx" for TX channel. - atmel,fifo-size: maximum number of data the RX and TX FIFOs can store for FIFO capable USARTs. - rs485-rts-delay, rs485-rx-during-tx, linux,rs485-enabled-at-boot-time: see rs485.txt @@ -81,5 +88,8 @@ Example: interrupts = <12 IRQ_TYPE_LEVEL_HIGH 5>; clocks = <&usart0_clk>; clock-names = "usart"; + dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(3)>, + <&dma0 2 (AT91_DMA_CFG_PER_ID(4) | AT91_DMA_CFG_FIFOCFG_ASAP)>; + dma-names = "tx", "rx"; cs-gpios = <&pioB 3 0>; }; diff --git a/dts/Bindings/mfd/cros-ec.txt b/dts/Bindings/mfd/cros-ec.txt index 6245c9b1a6..4860eabd0f 100644 --- a/dts/Bindings/mfd/cros-ec.txt +++ b/dts/Bindings/mfd/cros-ec.txt @@ -3,7 +3,7 @@ ChromeOS Embedded Controller Google's ChromeOS EC is a Cortex-M device which talks to the AP and implements various function such as keyboard and battery charging. -The EC can be connect through various means (I2C, SPI, LPC) and the +The EC can be connect through various means (I2C, SPI, LPC, RPMSG) and the compatible string used depends on the interface. Each connection method has its own driver which connects to the top level interface-agnostic EC driver. Other Linux driver (such as cros-ec-keyb for the matrix keyboard) connect to @@ -17,6 +17,9 @@ Required properties (SPI): - compatible: "google,cros-ec-spi" - reg: SPI chip select +Required properties (RPMSG): +- compatible: "google,cros-ec-rpmsg" + Optional properties (SPI): - google,cros-ec-spi-pre-delay: Some implementations of the EC need a little time to wake up from sleep before they can receive SPI transfers at a high diff --git a/dts/Bindings/mfd/lp87565.txt b/dts/Bindings/mfd/lp87565.txt index a48df7c08a..41671e0dc2 100644 --- a/dts/Bindings/mfd/lp87565.txt +++ b/dts/Bindings/mfd/lp87565.txt @@ -41,3 +41,39 @@ lp87565_pmic: pmic@60 { }; }; }; + +TI LP87561 PMIC: + +This is a single output 4-phase regulator configuration + +Required properties: + - compatible: "ti,lp87561-q1" + - reg: I2C slave address. + - gpio-controller: Marks the device node as a GPIO Controller. + - #gpio-cells: Should be two. The first cell is the pin number and + the second cell is used to specify flags. + See ../gpio/gpio.txt for more information. + - xxx-in-supply: Phandle to parent supply node of each regulator + populated under regulators node. xxx should match + the supply_name populated in driver. +Example: + +lp87561_pmic: pmic@62 { + compatible = "ti,lp87561-q1"; + reg = <0x62>; + gpio-controller; + #gpio-cells = <2>; + + buck3210-in-supply = <&vsys_3v3>; + + regulators: regulators { + buck3210_reg: buck3210 { + /* VDD_CORE */ + regulator-name = "buck3210"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-always-on; + regulator-boot-on; + }; + }; +}; diff --git a/dts/Bindings/mfd/madera.txt b/dts/Bindings/mfd/madera.txt index db32660883..cad0f28005 100644 --- a/dts/Bindings/mfd/madera.txt +++ b/dts/Bindings/mfd/madera.txt @@ -11,10 +11,14 @@ bindings/sound/madera.txt Required properties: - compatible : One of the following chip-specific strings: + "cirrus,cs47l15" "cirrus,cs47l35" "cirrus,cs47l85" "cirrus,cs47l90" "cirrus,cs47l91" + "cirrus,cs42l92" + "cirrus,cs47l92" + "cirrus,cs47l93" "cirrus,wm1840" - reg : I2C slave address when connected using I2C, chip select number when @@ -22,7 +26,7 @@ Required properties: - DCVDD-supply : Power supply for the device as defined in bindings/regulator/regulator.txt - Mandatory on CS47L35, CS47L90, CS47L91 + Mandatory on CS47L15, CS47L35, CS47L90, CS47L91, CS42L92, CS47L92, CS47L93 Optional on CS47L85, WM1840 - AVDD-supply, DBVDD1-supply, DBVDD2-supply, CPVDD1-supply, CPVDD2-supply : @@ -35,7 +39,7 @@ Required properties: (CS47L85, WM1840) - SPKVDD-supply : Power supply for the device - (CS47L35) + (CS47L15, CS47L35) - interrupt-controller : Indicates that this device is an interrupt controller diff --git a/dts/Bindings/mfd/rk808.txt b/dts/Bindings/mfd/rk808.txt index 1683ec3245..04df07f6f7 100644 --- a/dts/Bindings/mfd/rk808.txt +++ b/dts/Bindings/mfd/rk808.txt @@ -3,11 +3,15 @@ RK8XX Power Management Integrated Circuit The rk8xx family current members: rk805 rk808 +rk809 +rk817 rk818 Required properties: - compatible: "rockchip,rk805" - compatible: "rockchip,rk808" +- compatible: "rockchip,rk809" +- compatible: "rockchip,rk817" - compatible: "rockchip,rk818" - reg: I2C slave address - interrupts: the interrupt outputs of the controller. @@ -45,6 +49,23 @@ Optional RK808 properties: the gpio controller. If DVS GPIOs aren't present, voltage changes will happen very quickly with no slow ramp time. +Optional shared RK809 and RK817 properties: +- vcc1-supply: The input supply for DCDC_REG1 +- vcc2-supply: The input supply for DCDC_REG2 +- vcc3-supply: The input supply for DCDC_REG3 +- vcc4-supply: The input supply for DCDC_REG4 +- vcc5-supply: The input supply for LDO_REG1, LDO_REG2, LDO_REG3 +- vcc6-supply: The input supply for LDO_REG4, LDO_REG5, LDO_REG6 +- vcc7-supply: The input supply for LDO_REG7, LDO_REG8, LDO_REG9 + +Optional RK809 properties: +- vcc8-supply: The input supply for SWITCH_REG1 +- vcc9-supply: The input supply for DCDC_REG5, SWITCH_REG2 + +Optional RK817 properties: +- vcc8-supply: The input supply for BOOST +- vcc9-supply: The input supply for OTG_SWITCH + Optional RK818 properties: - vcc1-supply: The input supply for DCDC_REG1 - vcc2-supply: The input supply for DCDC_REG2 @@ -86,6 +107,21 @@ number as described in RK808 datasheet. - SWITCH_REGn - valid values for n are 1 to 2 +Following regulators of the RK809 and RK817 PMIC blocks are supported. Note that +the 'n' in regulator name, as in DCDC_REGn or LDOn, represents the DCDC or LDO +number as described in RK809 and RK817 datasheets. + + - DCDC_REGn + - valid values for n are 1 to 5 for RK809. + - valid values for n are 1 to 4 for RK817. + - LDO_REGn + - valid values for n are 1 to 9 for RK809. + - valid values for n are 1 to 9 for RK817. + - SWITCH_REGn + - valid values for n are 1 to 2 for RK809. + - BOOST for RK817 + - OTG_SWITCH for RK817 + Following regulators of the RK818 PMIC block are supported. Note that the 'n' in regulator name, as in DCDC_REGn or LDOn, represents the DCDC or LDO number as described in RK818 datasheet. @@ -98,6 +134,14 @@ number as described in RK818 datasheet. - HDMI_SWITCH - OTG_SWITCH +It is necessary to configure three pins for both the RK809 and RK817, the three +pins are "gpio_ts" "gpio_gt" "gpio_slp". + The gpio_gt and gpio_ts pins support the gpio function. + The gpio_slp pin is for controlling the pmic states, as below: + - reset + - power down + - sleep + Standard regulator bindings are used inside regulator subnodes. Check Documentation/devicetree/bindings/regulator/regulator.txt for more details diff --git a/dts/Bindings/mfd/rohm,bd70528-pmic.txt b/dts/Bindings/mfd/rohm,bd70528-pmic.txt new file mode 100644 index 0000000000..c3c02ce73c --- /dev/null +++ b/dts/Bindings/mfd/rohm,bd70528-pmic.txt @@ -0,0 +1,102 @@ +* ROHM BD70528 Power Management Integrated Circuit bindings + +BD70528MWV is an ultra-low quiescent current general purpose, single-chip, +power management IC for battery-powered portable devices. The IC +integrates 3 ultra-low current consumption buck converters, 3 LDOs and 2 +LED Drivers. Also included are 4 GPIOs, a real-time clock (RTC), a 32kHz +clock gate, high-accuracy VREF for use with an external ADC, flexible +dual-input power path, 10 bit SAR ADC for battery temperature monitor and +1S battery charger with scalable charge currents. + +Required properties: + - compatible : Should be "rohm,bd70528" + - reg : I2C slave address. + - interrupts : The interrupt line the device is connected to. + - interrupt-controller : To indicate BD70528 acts as an interrupt controller. + - #interrupt-cells : Should be 2. Usage is compliant to the 2 cells + variant of ../interrupt-controller/interrupts.txt + - gpio-controller : To indicate BD70528 acts as a GPIO controller. + - #gpio-cells : Should be 2. The first cell is the pin number and + the second cell is used to specify flags. See + ../gpio/gpio.txt for more information. + - #clock-cells : Should be 0. + - regulators: : List of child nodes that specify the regulators. + Please see ../regulator/rohm,bd70528-regulator.txt + +Optional properties: + - clock-output-names : Should contain name for output clock. + +Example: +/* External oscillator */ +osc: oscillator { + compatible = "fixed-clock"; + #clock-cells = <1>; + clock-frequency = <32768>; + clock-output-names = "osc"; +}; + +pmic: pmic@4b { + compatible = "rohm,bd70528"; + reg = <0x4b>; + interrupt-parent = <&gpio1>; + interrupts = <29 GPIO_ACTIVE_LOW>; + clocks = <&osc 0>; + #clock-cells = <0>; + clock-output-names = "bd70528-32k-out"; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + + regulators { + buck1: BUCK1 { + regulator-name = "buck1"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3400000>; + regulator-boot-on; + regulator-ramp-delay = <125>; + }; + buck2: BUCK2 { + regulator-name = "buck2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-ramp-delay = <125>; + }; + buck3: BUCK3 { + regulator-name = "buck3"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-ramp-delay = <250>; + }; + ldo1: LDO1 { + regulator-name = "ldo1"; + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + ldo2: LDO2 { + regulator-name = "ldo2"; + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + + ldo3: LDO3 { + regulator-name = "ldo3"; + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <3300000>; + }; + led_ldo1: LED_LDO1 { + regulator-name = "led_ldo1"; + regulator-min-microvolt = <200000>; + regulator-max-microvolt = <300000>; + }; + led_ldo2: LED_LDO2 { + regulator-name = "led_ldo2"; + regulator-min-microvolt = <200000>; + regulator-max-microvolt = <300000>; + }; + }; +}; diff --git a/dts/Bindings/mfd/rohm,bd71837-pmic.txt b/dts/Bindings/mfd/rohm,bd71837-pmic.txt index d5f68ac78d..f22d74c7a8 100644 --- a/dts/Bindings/mfd/rohm,bd71837-pmic.txt +++ b/dts/Bindings/mfd/rohm,bd71837-pmic.txt @@ -8,6 +8,8 @@ and 6 LDOs. Datasheet for BD71837 is available at: https://www.rohm.com/datasheet/BD71837MWV/bd71837mwv-e +Datasheet for BD71847 is available at: +https://www.rohm.com/datasheet/BD71847AMWV/bd71847amwv-e Required properties: - compatible : Should be "rohm,bd71837" for bd71837 @@ -38,6 +40,14 @@ target state is set to READY by default. If SNVS state is used the boot crucial regulators must have the regulator-always-on and regulator-boot-on properties set in regulator node. +- rohm,short-press-ms : Short press duration in milliseconds +- rohm,long-press-ms : Long press duration in milliseconds + +Configure the "short press" and "long press" timers for the power button. +Values are rounded to what hardware supports (500ms multiple for short and +1000ms multiple for long). If these properties are not present the existing +configuration (from bootloader or OTP) is not touched. + Example: /* external oscillator node */ diff --git a/dts/Bindings/mfd/ti-lmu.txt b/dts/Bindings/mfd/ti-lmu.txt index 86ca786d54..2296b8f24d 100644 --- a/dts/Bindings/mfd/ti-lmu.txt +++ b/dts/Bindings/mfd/ti-lmu.txt @@ -8,7 +8,7 @@ TI LMU driver supports lighting devices below. LM3632 Backlight and regulator LM3633 Backlight, LED and fault monitor LM3695 Backlight - LM3697 Backlight and fault monitor + LM36274 Backlight and regulator Required properties: - compatible: Should be one of: @@ -16,15 +16,32 @@ Required properties: "ti,lm3632" "ti,lm3633" "ti,lm3695" - "ti,lm3697" + "ti,lm36274" - reg: I2C slave address. 0x11 for LM3632 0x29 for LM3631 - 0x36 for LM3633, LM3697 + 0x36 for LM3633 0x63 for LM3695 + 0x11 for LM36274 -Optional property: +Optional properties: - enable-gpios: A GPIO specifier for hardware enable pin. + - ramp-up-us: Current ramping from one brightness level to + the a higher brightness level. + Range from 2048 us - 117.44 s + - ramp-down-us: Current ramping from one brightness level to + the a lower brightness level. + Range from 2048 us - 117.44 s + - ti,brightness-resolution - This determines whether to use 8 bit brightness + mode or 11 bit brightness mode. If this value is + not set the device is defaulted to the preferred + 8bit brightness mode per 7.3.4.1 of the data + sheet. This setting can either be in the parent + node or as part of the LED child nodes. This + is determined by the part itself if the strings + have a common brightness register or individual + brightness registers. + The values are 255 (8bit) or 2047 (11bit). Required node: - backlight: All LMU devices have backlight child nodes. @@ -35,14 +52,15 @@ Optional nodes: Required properties: - compatible: Should be one of: "ti,lm3633-fault-monitor" - "ti,lm3697-fault-monitor" - leds: LED properties for LM3633. Please refer to [2]. + LED properties for LM36274. Please refer to [4]. - regulators: Regulator properties for LM3631 and LM3632. Please refer to [3]. [1] ../leds/backlight/ti-lmu-backlight.txt [2] ../leds/leds-lm3633.txt [3] ../regulator/lm363x-regulator.txt +[4] ../leds/leds-lm36274.txt lm3631@29 { compatible = "ti,lm3631"; @@ -90,7 +108,7 @@ lm3631@29 { lcd_bl { led-sources = <0 1>; - ramp-up-msec = <300>; + ramp-up-us = <300000>; }; }; }; @@ -152,15 +170,15 @@ lm3633@36 { main { label = "main_lcd"; led-sources = <1 2>; - ramp-up-msec = <500>; - ramp-down-msec = <500>; + ramp-up-us = <500000>; + ramp-down-us = <500000>; }; front { label = "front_lcd"; led-sources = <0>; - ramp-up-msec = <1000>; - ramp-down-msec = <0>; + ramp-up-us = <1000000>; + ramp-down-us = <0>; }; }; @@ -201,23 +219,51 @@ lm3695@63 { }; }; -lm3697@36 { - compatible = "ti,lm3697"; - reg = <0x36>; +lm36274@11 { + compatible = "ti,lm36274"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x11>; enable-gpios = <&pioC 2 GPIO_ACTIVE_HIGH>; + regulators { + #address-cells = <1>; + #size-cells = <0>; + compatible = "ti,lm363x-regulator"; - backlight { - compatible = "ti,lm3697-backlight"; + enable-gpios = <&pioC 0 GPIO_ACTIVE_HIGH>, + <&pioC 1 GPIO_ACTIVE_HIGH>; - lcd { - led-sources = <0 1 2>; - ramp-up-msec = <200>; - ramp-down-msec = <200>; + vboost { + regulator-name = "lcd_boost"; + regulator-min-microvolt = <4000000>; + regulator-max-microvolt = <7150000>; + regulator-always-on; + }; + + vpos { + regulator-name = "lcd_vpos"; + regulator-min-microvolt = <4000000>; + regulator-max-microvolt = <6500000>; + }; + + vneg { + regulator-name = "lcd_vneg"; + regulator-min-microvolt = <4000000>; + regulator-max-microvolt = <6500000>; }; }; - fault-monitor { - compatible = "ti,lm3697-fault-monitor"; + backlight { + #address-cells = <1>; + #size-cells = <0>; + compatible = "ti,lm36274-backlight"; + + led@0 { + reg = <0>; + led-sources = <0 2>; + label = "white:backlight_cluster"; + linux,default-trigger = "backlight"; + }; }; }; diff --git a/dts/Bindings/misc/fsl,dpaa2-console.txt b/dts/Bindings/misc/fsl,dpaa2-console.txt new file mode 100644 index 0000000000..1442ba5d2d --- /dev/null +++ b/dts/Bindings/misc/fsl,dpaa2-console.txt @@ -0,0 +1,11 @@ +DPAA2 console support + +Required properties: + + - compatible + Value type: <string> + Definition: Must be "fsl,dpaa2-console". + - reg + Value type: <prop-encoded-array> + Definition: A standard property. Specifies the region where the MCFBA + (MC firmware base address) register can be found. diff --git a/dts/Bindings/misc/intel,ixp4xx-queue-manager.yaml b/dts/Bindings/misc/intel,ixp4xx-ahb-queue-manager.yaml index d2313b1d94..0ea21a6f70 100644 --- a/dts/Bindings/misc/intel,ixp4xx-queue-manager.yaml +++ b/dts/Bindings/misc/intel,ixp4xx-ahb-queue-manager.yaml @@ -2,7 +2,7 @@ # Copyright 2019 Linaro Ltd. %YAML 1.2 --- -$id: "http://devicetree.org/schemas/misc/intel-ixp4xx-ahb-queue-manager.yaml#" +$id: "http://devicetree.org/schemas/misc/intel,ixp4xx-ahb-queue-manager.yaml#" $schema: "http://devicetree.org/meta-schemas/core.yaml#" title: Intel IXP4xx AHB Queue Manager diff --git a/dts/Bindings/misc/olpc,xo1.75-ec.txt b/dts/Bindings/misc/olpc,xo1.75-ec.txt new file mode 100644 index 0000000000..8c4d649cdd --- /dev/null +++ b/dts/Bindings/misc/olpc,xo1.75-ec.txt @@ -0,0 +1,23 @@ +OLPC XO-1.75 Embedded Controller + +Required properties: +- compatible: Should be "olpc,xo1.75-ec". +- cmd-gpios: gpio specifier of the CMD pin + +The embedded controller requires the SPI controller driver to signal readiness +to receive a transfer (that is, when TX FIFO contains the response data) by +strobing the ACK pin with the ready signal. See the "ready-gpios" property of the +SSP binding as documented in: +<Documentation/devicetree/bindings/spi/spi-pxa2xx.txt>. + +Example: + &ssp3 { + spi-slave; + ready-gpios = <&gpio 125 GPIO_ACTIVE_HIGH>; + + slave { + compatible = "olpc,xo1.75-ec"; + spi-cpha; + cmd-gpios = <&gpio 155 GPIO_ACTIVE_HIGH>; + }; + }; diff --git a/dts/Bindings/misc/xlnx,sd-fec.txt b/dts/Bindings/misc/xlnx,sd-fec.txt new file mode 100644 index 0000000000..e3289634fa --- /dev/null +++ b/dts/Bindings/misc/xlnx,sd-fec.txt @@ -0,0 +1,58 @@ +* Xilinx SDFEC(16nm) IP * + +The Soft Decision Forward Error Correction (SDFEC) Engine is a Hard IP block +which provides high-throughput LDPC and Turbo Code implementations. +The LDPC decode & encode functionality is capable of covering a range of +customer specified Quasi-cyclic (QC) codes. The Turbo decode functionality +principally covers codes used by LTE. The FEC Engine offers significant +power and area savings versus implementations done in the FPGA fabric. + + +Required properties: +- compatible: Must be "xlnx,sd-fec-1.1" +- clock-names : List of input clock names from the following: + - "core_clk", Main processing clock for processing core (required) + - "s_axi_aclk", AXI4-Lite memory-mapped slave interface clock (required) + - "s_axis_din_aclk", DIN AXI4-Stream Slave interface clock (optional) + - "s_axis_din_words-aclk", DIN_WORDS AXI4-Stream Slave interface clock (optional) + - "s_axis_ctrl_aclk", Control input AXI4-Stream Slave interface clock (optional) + - "m_axis_dout_aclk", DOUT AXI4-Stream Master interface clock (optional) + - "m_axis_dout_words_aclk", DOUT_WORDS AXI4-Stream Master interface clock (optional) + - "m_axis_status_aclk", Status output AXI4-Stream Master interface clock (optional) +- clocks : Clock phandles (see clock_bindings.txt for details). +- reg: Should contain Xilinx SDFEC 16nm Hardened IP block registers + location and length. +- xlnx,sdfec-code : Should contain "ldpc" or "turbo" to describe the codes + being used. +- xlnx,sdfec-din-words : A value 0 indicates that the DIN_WORDS interface is + driven with a fixed value and is not present on the device, a value of 1 + configures the DIN_WORDS to be block based, while a value of 2 configures the + DIN_WORDS input to be supplied for each AXI transaction. +- xlnx,sdfec-din-width : Configures the DIN AXI stream where a value of 1 + configures a width of "1x128b", 2 a width of "2x128b" and 4 configures a width + of "4x128b". +- xlnx,sdfec-dout-words : A value 0 indicates that the DOUT_WORDS interface is + driven with a fixed value and is not present on the device, a value of 1 + configures the DOUT_WORDS to be block based, while a value of 2 configures the + DOUT_WORDS input to be supplied for each AXI transaction. +- xlnx,sdfec-dout-width : Configures the DOUT AXI stream where a value of 1 + configures a width of "1x128b", 2 a width of "2x128b" and 4 configures a width + of "4x128b". +Optional properties: +- interrupts: should contain SDFEC interrupt number + +Example +--------------------------------------- + sd_fec_0: sd-fec@a0040000 { + compatible = "xlnx,sd-fec-1.1"; + clock-names = "core_clk","s_axi_aclk","s_axis_ctrl_aclk","s_axis_din_aclk","m_axis_status_aclk","m_axis_dout_aclk"; + clocks = <&misc_clk_2>,<&misc_clk_0>,<&misc_clk_1>,<&misc_clk_1>,<&misc_clk_1>, <&misc_clk_1>; + reg = <0x0 0xa0040000 0x0 0x40000>; + interrupt-parent = <&axi_intc>; + interrupts = <1 0>; + xlnx,sdfec-code = "ldpc"; + xlnx,sdfec-din-words = <0>; + xlnx,sdfec-din-width = <2>; + xlnx,sdfec-dout-words = <0>; + xlnx,sdfec-dout-width = <1>; + }; diff --git a/dts/Bindings/mmc/allwinner,sun4i-a10-mmc.yaml b/dts/Bindings/mmc/allwinner,sun4i-a10-mmc.yaml new file mode 100644 index 0000000000..df0280edef --- /dev/null +++ b/dts/Bindings/mmc/allwinner,sun4i-a10-mmc.yaml @@ -0,0 +1,98 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mmc/allwinner,sun4i-a10-mmc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A10 MMC Controller Device Tree Bindings + +allOf: + - $ref: "mmc-controller.yaml" + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <maxime.ripard@bootlin.com> + +properties: + "#address-cells": true + "#size-cells": true + + compatible: + oneOf: + - const: allwinner,sun4i-a10-mmc + - const: allwinner,sun5i-a13-mmc + - const: allwinner,sun7i-a20-mmc + - const: allwinner,sun8i-a83t-emmc + - const: allwinner,sun9i-a80-mmc + - const: allwinner,sun50i-a64-emmc + - const: allwinner,sun50i-a64-mmc + - items: + - const: allwinner,sun8i-a83t-mmc + - const: allwinner,sun7i-a20-mmc + - items: + - const: allwinner,sun50i-h6-emmc + - const: allwinner,sun50i-a64-emmc + - items: + - const: allwinner,sun50i-h6-mmc + - const: allwinner,sun50i-a64-mmc + - items: + - const: allwinner,sun8i-r40-emmc + - const: allwinner,sun50i-a64-emmc + - items: + - const: allwinner,sun8i-r40-mmc + - const: allwinner,sun50i-a64-mmc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + minItems: 2 + maxItems: 4 + items: + - description: Bus Clock + - description: Module Clock + - description: Output Clock + - description: Sample Clock + + clock-names: + minItems: 2 + maxItems: 4 + items: + - const: ahb + - const: mmc + - const: output + - const: sample + + resets: + maxItems: 1 + + reset-names: + const: ahb + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +examples: + - | + mmc0: mmc@1c0f000 { + compatible = "allwinner,sun5i-a13-mmc"; + reg = <0x01c0f000 0x1000>; + clocks = <&ahb_gates 8>, <&mmc0_clk>; + clock-names = "ahb", "mmc"; + interrupts = <32>; + bus-width = <4>; + cd-gpios = <&pio 7 1 0>; + }; + +# FIXME: We should set it, but it would report all the generic +# properties as additional properties. +# additionalProperties: false + +... diff --git a/dts/Bindings/mmc/amlogic,meson-gx.txt b/dts/Bindings/mmc/amlogic,meson-gx.txt index 13e70409e8..ccc5358db1 100644 --- a/dts/Bindings/mmc/amlogic,meson-gx.txt +++ b/dts/Bindings/mmc/amlogic,meson-gx.txt @@ -22,6 +22,10 @@ Required properties: clock rate requested by the MMC core. - resets : phandle of the internal reset line +Optional properties: +- amlogic,dram-access-quirk: set when controller's internal DMA engine cannot access the + DRAM memory, like on the G12A dedicated SDIO controller. + Example: sd_emmc_a: mmc@70000 { diff --git a/dts/Bindings/mmc/mmc-controller.yaml b/dts/Bindings/mmc/mmc-controller.yaml new file mode 100644 index 0000000000..080754e0ef --- /dev/null +++ b/dts/Bindings/mmc/mmc-controller.yaml @@ -0,0 +1,374 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mmc/mmc-controller.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MMC Controller Generic Binding + +maintainers: + - Ulf Hansson <ulf.hansson@linaro.org> + +description: | + These properties are common to multiple MMC host controllers. Any host + that requires the respective functionality should implement them using + these definitions. + +properties: + $nodename: + pattern: "^mmc(@.*)?$" + + "#address-cells": + const: 1 + description: | + The cell is the slot ID if a function subnode is used. + + "#size-cells": + const: 0 + + # Card Detection. + # If none of these properties are supplied, the host native card + # detect will be used. Only one of them should be provided. + + broken-cd: + $ref: /schemas/types.yaml#/definitions/flag + description: + There is no card detection available; polling must be used. + + cd-gpios: + description: + The card detection will be done using the GPIO provided. + + non-removable: + $ref: /schemas/types.yaml#/definitions/flag + description: + Non-removable slot (like eMMC); assume always present. + + # *NOTE* on CD and WP polarity. To use common for all SD/MMC host + # controllers line polarity properties, we have to fix the meaning + # of the "normal" and "inverted" line levels. We choose to follow + # the SDHCI standard, which specifies both those lines as "active + # low." Therefore, using the "cd-inverted" property means, that the + # CD line is active high, i.e. it is high, when a card is + # inserted. Similar logic applies to the "wp-inverted" property. + # + # CD and WP lines can be implemented on the hardware in one of two + # ways: as GPIOs, specified in cd-gpios and wp-gpios properties, or + # as dedicated pins. Polarity of dedicated pins can be specified, + # using *-inverted properties. GPIO polarity can also be specified + # using the GPIO_ACTIVE_LOW flag. This creates an ambiguity in the + # latter case. We choose to use the XOR logic for GPIO CD and WP + # lines. This means, the two properties are "superimposed," for + # example leaving the GPIO_ACTIVE_LOW flag clear and specifying the + # respective *-inverted property property results in a + # double-inversion and actually means the "normal" line polarity is + # in effect. + wp-inverted: + $ref: /schemas/types.yaml#/definitions/flag + description: + The Write Protect line polarity is inverted. + + cd-inverted: + $ref: /schemas/types.yaml#/definitions/flag + description: + The CD line polarity is inverted. + + # Other properties + + bus-width: + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - enum: [1, 4, 8] + default: 1 + description: + Number of data lines. + + max-frequency: + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - minimum: 400000 + - maximum: 200000000 + description: + Maximum operating frequency of the bus. + + disable-wp: + $ref: /schemas/types.yaml#/definitions/flag + description: + When set, no physical write-protect line is present. This + property should only be specified when the controller has a + dedicated write-protect detection logic. If a GPIO is always + used for the write-protect detection. If a GPIO is always used + for the write-protect detection logic, it is sufficient to not + specify the wp-gpios property in the absence of a write-protect + line. + + wp-gpios: + description: + GPIO to use for the write-protect detection. + + cd-debounce-delay-ms: + description: + Set delay time before detecting card after card insert + interrupt. + + no-1-8-v: + $ref: /schemas/types.yaml#/definitions/flag + description: + When specified, denotes that 1.8V card voltage is not supported + on this system, even if the controller claims it. + + cap-sd-highspeed: + $ref: /schemas/types.yaml#/definitions/flag + description: + SD high-speed timing is supported. + + cap-mmc-highspeed: + $ref: /schemas/types.yaml#/definitions/flag + description: + MMC high-speed timing is supported. + + sd-uhs-sdr12: + $ref: /schemas/types.yaml#/definitions/flag + description: + SD UHS SDR12 speed is supported. + + sd-uhs-sdr25: + $ref: /schemas/types.yaml#/definitions/flag + description: + SD UHS SDR25 speed is supported. + + sd-uhs-sdr50: + $ref: /schemas/types.yaml#/definitions/flag + description: + SD UHS SDR50 speed is supported. + + sd-uhs-sdr104: + $ref: /schemas/types.yaml#/definitions/flag + description: + SD UHS SDR104 speed is supported. + + sd-uhs-ddr50: + $ref: /schemas/types.yaml#/definitions/flag + description: + SD UHS DDR50 speed is supported. + + cap-power-off-card: + $ref: /schemas/types.yaml#/definitions/flag + description: + Powering off the card is safe. + + cap-mmc-hw-reset: + $ref: /schemas/types.yaml#/definitions/flag + description: + eMMC hardware reset is supported + + cap-sdio-irq: + $ref: /schemas/types.yaml#/definitions/flag + description: + enable SDIO IRQ signalling on this interface + + full-pwr-cycle: + $ref: /schemas/types.yaml#/definitions/flag + description: + Full power cycle of the card is supported. + + mmc-ddr-1_2v: + $ref: /schemas/types.yaml#/definitions/flag + description: + eMMC high-speed DDR mode (1.2V I/O) is supported. + + mmc-ddr-1_8v: + $ref: /schemas/types.yaml#/definitions/flag + description: + eMMC high-speed DDR mode (1.8V I/O) is supported. + + mmc-ddr-3_3v: + $ref: /schemas/types.yaml#/definitions/flag + description: + eMMC high-speed DDR mode (3.3V I/O) is supported. + + mmc-hs200-1_2v: + $ref: /schemas/types.yaml#/definitions/flag + description: + eMMC HS200 mode (1.2V I/O) is supported. + + mmc-hs200-1_8v: + $ref: /schemas/types.yaml#/definitions/flag + description: + eMMC HS200 mode (1.8V I/O) is supported. + + mmc-hs400-1_2v: + $ref: /schemas/types.yaml#/definitions/flag + description: + eMMC HS400 mode (1.2V I/O) is supported. + + mmc-hs400-1_8v: + $ref: /schemas/types.yaml#/definitions/flag + description: + eMMC HS400 mode (1.8V I/O) is supported. + + mmc-hs400-enhanced-strobe: + $ref: /schemas/types.yaml#/definitions/flag + description: + eMMC HS400 enhanced strobe mode is supported + + dsr: + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - minimum: 0 + - maximum: 0xffff + description: + Value the card Driver Stage Register (DSR) should be programmed + with. + + no-sdio: + $ref: /schemas/types.yaml#/definitions/flag + description: + Controller is limited to send SDIO commands during + initialization. + + no-sd: + $ref: /schemas/types.yaml#/definitions/flag + description: + Controller is limited to send SD commands during initialization. + + no-mmc: + $ref: /schemas/types.yaml#/definitions/flag + description: + Controller is limited to send MMC commands during + initialization. + + fixed-emmc-driver-type: + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - minimum: 0 + - maximum: 4 + description: + For non-removable eMMC, enforce this driver type. The value is + the driver type as specified in the eMMC specification (table + 206 in spec version 5.1) + + post-power-on-delay-ms: + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - default: 10 + description: + It was invented for MMC pwrseq-simple which could be referred to + mmc-pwrseq-simple.txt. But now it\'s reused as a tunable delay + waiting for I/O signalling and card power supply to be stable, + regardless of whether pwrseq-simple is used. Default to 10ms if + no available. + + supports-cqe: + $ref: /schemas/types.yaml#/definitions/flag + description: + The presence of this property indicates that the corresponding + MMC host controller supports HW command queue feature. + + disable-cqe-dcmd: + $ref: /schemas/types.yaml#/definitions/flag + description: + The presence of this property indicates that the MMC + controller\'s command queue engine (CQE) does not support direct + commands (DCMDs). + + keep-power-in-suspend: + $ref: /schemas/types.yaml#/definitions/flag + description: + SDIO only. Preserves card power during a suspend/resume cycle. + + # Deprecated: enable-sdio-wakeup + wakeup-source: + $ref: /schemas/types.yaml#/definitions/flag + description: + SDIO only. Enables wake up of host system on SDIO IRQ assertion. + + vmmc-supply: + description: + Supply for the card power + + vqmmc-supply: + description: + Supply for the bus IO line power + + mmc-pwrseq: + $ref: /schemas/types.yaml#/definitions/phandle + description: + System-on-Chip designs may specify a specific MMC power + sequence. To successfully detect an (e)MMC/SD/SDIO card, that + power sequence must be maintained while initializing the card. + +patternProperties: + "^.*@[0-9]+$": + type: object + description: | + On embedded systems the cards connected to a host may need + additional properties. These can be specified in subnodes to the + host controller node. The subnodes are identified by the + standard \'reg\' property. Which information exactly can be + specified depends on the bindings for the SDIO function driver + for the subnode, as specified by the compatible string. + + properties: + compatible: + description: | + Name of SDIO function following generic names recommended + practice + + reg: + items: + - minimum: 0 + maximum: 7 + description: + Must contain the SDIO function number of the function this + subnode describes. A value of 0 denotes the memory SD + function, values from 1 to 7 denote the SDIO functions. + + broken-hpi: + $ref: /schemas/types.yaml#/definitions/flag + description: + Use this to indicate that the mmc-card has a broken hpi + implementation, and that hpi should not be used. + + required: + - reg + +dependencies: + cd-debounce-delay-ms: [ cd-gpios ] + fixed-emmc-driver-type: [ non-removable ] + +examples: + - | + sdhci@ab000000 { + compatible = "sdhci"; + reg = <0xab000000 0x200>; + interrupts = <23>; + bus-width = <4>; + cd-gpios = <&gpio 69 0>; + cd-inverted; + wp-gpios = <&gpio 70 0>; + max-frequency = <50000000>; + keep-power-in-suspend; + wakeup-source; + mmc-pwrseq = <&sdhci0_pwrseq>; + }; + + - | + mmc3: mmc@1c12000 { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc3_pins_a>; + vmmc-supply = <®_vmmc3>; + bus-width = <4>; + non-removable; + mmc-pwrseq = <&sdhci0_pwrseq>; + + brcmf: bcrmf@1 { + reg = <1>; + compatible = "brcm,bcm43xx-fmac"; + interrupt-parent = <&pio>; + interrupts = <10 8>; + interrupt-names = "host-wake"; + }; + }; diff --git a/dts/Bindings/mmc/mmc.txt b/dts/Bindings/mmc/mmc.txt index c269dbe384..bf9d7d3feb 100644 --- a/dts/Bindings/mmc/mmc.txt +++ b/dts/Bindings/mmc/mmc.txt @@ -1,177 +1 @@ -These properties are common to multiple MMC host controllers. Any host -that requires the respective functionality should implement them using -these definitions. - -Interpreted by the OF core: -- reg: Registers location and length. -- interrupts: Interrupts used by the MMC controller. - -Card detection: -If no property below is supplied, host native card detect is used. -Only one of the properties in this section should be supplied: - - broken-cd: There is no card detection available; polling must be used. - - cd-gpios: Specify GPIOs for card detection, see gpio binding - - non-removable: non-removable slot (like eMMC); assume always present. - -Optional properties: -- bus-width: Number of data lines, can be <1>, <4>, or <8>. The default - will be <1> if the property is absent. -- wp-gpios: Specify GPIOs for write protection, see gpio binding -- cd-inverted: when present, polarity on the CD line is inverted. See the note - below for the case, when a GPIO is used for the CD line -- cd-debounce-delay-ms: Set delay time before detecting card after card insert interrupt. - It's only valid when cd-gpios is present. -- wp-inverted: when present, polarity on the WP line is inverted. See the note - below for the case, when a GPIO is used for the WP line -- disable-wp: When set no physical WP line is present. This property should - only be specified when the controller has a dedicated write-protect - detection logic. If a GPIO is always used for the write-protect detection - logic it is sufficient to not specify wp-gpios property in the absence of a WP - line. -- max-frequency: maximum operating clock frequency -- no-1-8-v: when present, denotes that 1.8v card voltage is not supported on - this system, even if the controller claims it is. -- cap-sd-highspeed: SD high-speed timing is supported -- cap-mmc-highspeed: MMC high-speed timing is supported -- sd-uhs-sdr12: SD UHS SDR12 speed is supported -- sd-uhs-sdr25: SD UHS SDR25 speed is supported -- sd-uhs-sdr50: SD UHS SDR50 speed is supported -- sd-uhs-sdr104: SD UHS SDR104 speed is supported -- sd-uhs-ddr50: SD UHS DDR50 speed is supported -- cap-power-off-card: powering off the card is safe -- cap-mmc-hw-reset: eMMC hardware reset is supported -- cap-sdio-irq: enable SDIO IRQ signalling on this interface -- full-pwr-cycle: full power cycle of the card is supported -- mmc-ddr-3_3v: eMMC high-speed DDR mode(3.3V I/O) is supported -- mmc-ddr-1_8v: eMMC high-speed DDR mode(1.8V I/O) is supported -- mmc-ddr-1_2v: eMMC high-speed DDR mode(1.2V I/O) is supported -- mmc-hs200-1_8v: eMMC HS200 mode(1.8V I/O) is supported -- mmc-hs200-1_2v: eMMC HS200 mode(1.2V I/O) is supported -- mmc-hs400-1_8v: eMMC HS400 mode(1.8V I/O) is supported -- mmc-hs400-1_2v: eMMC HS400 mode(1.2V I/O) is supported -- mmc-hs400-enhanced-strobe: eMMC HS400 enhanced strobe mode is supported -- dsr: Value the card's (optional) Driver Stage Register (DSR) should be - programmed with. Valid range: [0 .. 0xffff]. -- no-sdio: controller is limited to send sdio cmd during initialization -- no-sd: controller is limited to send sd cmd during initialization -- no-mmc: controller is limited to send mmc cmd during initialization -- fixed-emmc-driver-type: for non-removable eMMC, enforce this driver type. - The value <n> is the driver type as specified in the eMMC specification - (table 206 in spec version 5.1). -- post-power-on-delay-ms : It was invented for MMC pwrseq-simple which could - be referred to mmc-pwrseq-simple.txt. But now it's reused as a tunable delay - waiting for I/O signalling and card power supply to be stable, regardless of - whether pwrseq-simple is used. Default to 10ms if no available. -- supports-cqe : The presence of this property indicates that the corresponding - MMC host controller supports HW command queue feature. -- disable-cqe-dcmd: This property indicates that the MMC controller's command - queue engine (CQE) does not support direct commands (DCMDs). - -*NOTE* on CD and WP polarity. To use common for all SD/MMC host controllers line -polarity properties, we have to fix the meaning of the "normal" and "inverted" -line levels. We choose to follow the SDHCI standard, which specifies both those -lines as "active low." Therefore, using the "cd-inverted" property means, that -the CD line is active high, i.e. it is high, when a card is inserted. Similar -logic applies to the "wp-inverted" property. - -CD and WP lines can be implemented on the hardware in one of two ways: as GPIOs, -specified in cd-gpios and wp-gpios properties, or as dedicated pins. Polarity of -dedicated pins can be specified, using *-inverted properties. GPIO polarity can -also be specified using the GPIO_ACTIVE_LOW flag. This creates an ambiguity -in the latter case. We choose to use the XOR logic for GPIO CD and WP lines. -This means, the two properties are "superimposed," for example leaving the -GPIO_ACTIVE_LOW flag clear and specifying the respective *-inverted property -property results in a double-inversion and actually means the "normal" line -polarity is in effect. - -Optional SDIO properties: -- keep-power-in-suspend: Preserves card power during a suspend/resume cycle -- wakeup-source: Enables wake up of host system on SDIO IRQ assertion - (Legacy property supported: "enable-sdio-wakeup") - -MMC power ---------- - -Controllers may implement power control from both the connected cards and -the IO signaling (for example to change to high-speed 1.8V signalling). If -the system supports this, then the following two properties should point -to valid regulator nodes: - -- vqmmc-supply: supply node for IO line power -- vmmc-supply: supply node for card's power - - -MMC power sequences: --------------------- - -System on chip designs may specify a specific MMC power sequence. To -successfully detect an (e)MMC/SD/SDIO card, that power sequence must be -maintained while initializing the card. - -Optional property: -- mmc-pwrseq: phandle to the MMC power sequence node. See "mmc-pwrseq-*" - for documentation of MMC power sequence bindings. - - -Use of Function subnodes ------------------------- - -On embedded systems the cards connected to a host may need additional -properties. These can be specified in subnodes to the host controller node. -The subnodes are identified by the standard 'reg' property. -Which information exactly can be specified depends on the bindings for the -SDIO function driver for the subnode, as specified by the compatible string. - -Required host node properties when using function subnodes: -- #address-cells: should be one. The cell is the slot id. -- #size-cells: should be zero. - -Required function subnode properties: -- reg: Must contain the SDIO function number of the function this subnode - describes. A value of 0 denotes the memory SD function, values from - 1 to 7 denote the SDIO functions. - -Optional function subnode properties: -- compatible: name of SDIO function following generic names recommended practice - - -Examples --------- - -Basic example: - -sdhci@ab000000 { - compatible = "sdhci"; - reg = <0xab000000 0x200>; - interrupts = <23>; - bus-width = <4>; - cd-gpios = <&gpio 69 0>; - cd-inverted; - wp-gpios = <&gpio 70 0>; - max-frequency = <50000000>; - keep-power-in-suspend; - wakeup-source; - mmc-pwrseq = <&sdhci0_pwrseq> -} - -Example with sdio function subnode: - -mmc3: mmc@1c12000 { - #address-cells = <1>; - #size-cells = <0>; - - pinctrl-names = "default"; - pinctrl-0 = <&mmc3_pins_a>; - vmmc-supply = <®_vmmc3>; - bus-width = <4>; - non-removable; - mmc-pwrseq = <&sdhci0_pwrseq> - - brcmf: bcrmf@1 { - reg = <1>; - compatible = "brcm,bcm43xx-fmac"; - interrupt-parent = <&pio>; - interrupts = <10 8>; /* PH10 / EINT10 */ - interrupt-names = "host-wake"; - }; -}; +This file has moved to mmc-controller.yaml. diff --git a/dts/Bindings/mmc/tmio_mmc.txt b/dts/Bindings/mmc/renesas,sdhi.txt index 2b4f17ca90..dd08d038a6 100644 --- a/dts/Bindings/mmc/tmio_mmc.txt +++ b/dts/Bindings/mmc/renesas,sdhi.txt @@ -1,13 +1,4 @@ -* Toshiba Mobile IO SD/MMC controller - -The tmio-mmc driver doesn't probe its devices actively, instead its binding to -devices is managed by either MFD drivers or by the sh_mobile_sdhi platform -driver. Those drivers supply the tmio-mmc driver with platform data, that either -describe hardware capabilities, known to them, or are obtained by them from -their own platform data or from their DT information. In the latter case all -compulsory and any optional properties, common to all SD/MMC drivers, as -described in mmc.txt, can be used. Additionally the following tmio_mmc-specific -optional bindings can be used. +* Renesas SDHI SD/MMC controller Required properties: - compatible: should contain one or more of the following: diff --git a/dts/Bindings/mmc/sdhci-am654.txt b/dts/Bindings/mmc/sdhci-am654.txt index 15dbbbace2..50e87df479 100644 --- a/dts/Bindings/mmc/sdhci-am654.txt +++ b/dts/Bindings/mmc/sdhci-am654.txt @@ -8,7 +8,10 @@ Only deviations are documented here. [3] Documentation/devicetree/bindings/interrupt-controller/interrupts.txt Required Properties: - - compatible: should be "ti,am654-sdhci-5.1" + - compatible: should be one of: + "ti,am654-sdhci-5.1": SDHCI on AM654 device. + "ti,j721e-sdhci-8bit": 8 bit SDHCI on J721E device. + "ti,j721e-sdhci-4bit": 4 bit SDHCI on J721E device. - reg: Must be two entries. - The first should be the sdhci register space - The second should the subsystem/phy register space @@ -16,9 +19,13 @@ Required Properties: - clock-names: Tuple including "clk_xin" and "clk_ahb" - interrupts: Interrupt specifiers - ti,otap-del-sel: Output Tap Delay select + +Optional Properties (Required for ti,am654-sdhci-5.1 and ti,j721e-sdhci-8bit): - ti,trm-icp: DLL trim select - ti,driver-strength-ohm: driver strength in ohms. Valid values are 33, 40, 50, 66 and 100 ohms. +Optional Properties: + - ti,strobe-sel: strobe select delay for HS400 speed mode. Default value: 0x0. Example: diff --git a/dts/Bindings/mmc/sdhci-sprd.txt b/dts/Bindings/mmc/sdhci-sprd.txt index 45c9978aad..eb7eb1b529 100644 --- a/dts/Bindings/mmc/sdhci-sprd.txt +++ b/dts/Bindings/mmc/sdhci-sprd.txt @@ -14,10 +14,31 @@ Required properties: - clock-names: Should contain the following: "sdio" - SDIO source clock (required) "enable" - gate clock which used for enabling/disabling the device (required) + "2x_enable" - gate clock controlling the device for some special platforms (optional) Optional properties: - assigned-clocks: the same with "sdio" clock - assigned-clock-parents: the default parent of "sdio" clock +- pinctrl-names: should be "default", "state_uhs" +- pinctrl-0: should contain default/high speed pin control +- pinctrl-1: should contain uhs mode pin control + +PHY DLL delays are used to delay the data valid window, and align the window +to sampling clock. PHY DLL delays can be configured by following properties, +and each property contains 4 cells which are used to configure the clock data +write line delay value, clock read command line delay value, clock read data +positive edge delay value and clock read data negative edge delay value. +Each cell's delay value unit is cycle of the PHY clock. + +- sprd,phy-delay-legacy: Delay value for legacy timing. +- sprd,phy-delay-sd-highspeed: Delay value for SD high-speed timing. +- sprd,phy-delay-sd-uhs-sdr50: Delay value for SD UHS SDR50 timing. +- sprd,phy-delay-sd-uhs-sdr104: Delay value for SD UHS SDR50 timing. +- sprd,phy-delay-mmc-highspeed: Delay value for MMC high-speed timing. +- sprd,phy-delay-mmc-ddr52: Delay value for MMC DDR52 timing. +- sprd,phy-delay-mmc-hs200: Delay value for MMC HS200 timing. +- sprd,phy-delay-mmc-hs400: Delay value for MMC HS400 timing. +- sprd,phy-delay-mmc-hs400es: Delay value for MMC HS400 enhanced strobe timing. Examples: @@ -32,6 +53,11 @@ sdio0: sdio@20600000 { assigned-clocks = <&ap_clk CLK_EMMC_2X>; assigned-clock-parents = <&rpll CLK_RPLL_390M>; + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&sd0_pins_default>; + pinctrl-1 = <&sd0_pins_uhs>; + + sprd,phy-delay-sd-uhs-sdr104 = <0x3f 0x7f 0x2e 0x2e>; bus-width = <8>; non-removable; no-sdio; diff --git a/dts/Bindings/mmc/sunxi-mmc.txt b/dts/Bindings/mmc/sunxi-mmc.txt deleted file mode 100644 index e9cb3ec5e5..0000000000 --- a/dts/Bindings/mmc/sunxi-mmc.txt +++ /dev/null @@ -1,52 +0,0 @@ -* Allwinner sunxi MMC controller - -The highspeed MMC host controller on Allwinner SoCs provides an interface -for MMC, SD and SDIO types of memory cards. - -Supported maximum speeds are the ones of the eMMC standard 4.5 as well -as the speed of SD standard 3.0. -Absolute maximum transfer rate is 200MB/s - -Required properties: - - compatible : should be one of: - * "allwinner,sun4i-a10-mmc" - * "allwinner,sun5i-a13-mmc" - * "allwinner,sun7i-a20-mmc" - * "allwinner,sun8i-a83t-emmc" - * "allwinner,sun9i-a80-mmc" - * "allwinner,sun50i-a64-emmc" - * "allwinner,sun50i-a64-mmc" - * "allwinner,sun50i-h6-emmc", "allwinner.sun50i-a64-emmc" - * "allwinner,sun50i-h6-mmc", "allwinner.sun50i-a64-mmc" - - reg : mmc controller base registers - - clocks : a list with 4 phandle + clock specifier pairs - - clock-names : must contain "ahb", "mmc", "output" and "sample" - - interrupts : mmc controller interrupt - -Optional properties: - - resets : phandle + reset specifier pair - - reset-names : must contain "ahb" - - for cd, bus-width and additional generic mmc parameters - please refer to mmc.txt within this directory - -Examples: - - Within .dtsi: - mmc0: mmc@1c0f000 { - compatible = "allwinner,sun5i-a13-mmc"; - reg = <0x01c0f000 0x1000>; - clocks = <&ahb_gates 8>, <&mmc0_clk>, <&mmc0_output_clk>, <&mmc0_sample_clk>; - clock-names = "ahb", "mod", "output", "sample"; - interrupts = <0 32 4>; - status = "disabled"; - }; - - - Within dts: - mmc0: mmc@1c0f000 { - pinctrl-names = "default", "default"; - pinctrl-0 = <&mmc0_pins_a>; - pinctrl-1 = <&mmc0_cd_pin_reference_design>; - bus-width = <4>; - cd-gpios = <&pio 7 1 0>; /* PH1 */ - cd-inverted; - status = "okay"; - }; diff --git a/dts/Bindings/mtd/allwinner,sun4i-a10-nand.yaml b/dts/Bindings/mtd/allwinner,sun4i-a10-nand.yaml index fbd4da3684..b5b3cf5b1a 100644 --- a/dts/Bindings/mtd/allwinner,sun4i-a10-nand.yaml +++ b/dts/Bindings/mtd/allwinner,sun4i-a10-nand.yaml @@ -55,9 +55,9 @@ patternProperties: "^pinctrl-[0-9]+$": true "^nand@[a-f0-9]+$": + type: object properties: reg: - maxItems: 1 minimum: 0 maximum: 7 diff --git a/dts/Bindings/mtd/brcm,brcmnand.txt b/dts/Bindings/mtd/brcm,brcmnand.txt index 0b7c3738b6..82156dc8f3 100644 --- a/dts/Bindings/mtd/brcm,brcmnand.txt +++ b/dts/Bindings/mtd/brcm,brcmnand.txt @@ -28,6 +28,7 @@ Required properties: brcm,brcmnand-v7.0 brcm,brcmnand-v7.1 brcm,brcmnand-v7.2 + brcm,brcmnand-v7.3 brcm,brcmnand - reg : the register start and length for NAND register region. (optional) Flash DMA register range (if present) @@ -101,10 +102,10 @@ Required properties: number (e.g., 0, 1, 2, etc.) - #address-cells : see partition.txt - #size-cells : see partition.txt -- nand-ecc-strength : see nand-controller.yaml -- nand-ecc-step-size : must be 512 or 1024. See nand-controller.yaml Optional properties: +- nand-ecc-strength : see nand-controller.yaml +- nand-ecc-step-size : must be 512 or 1024. See nand-controller.yaml - nand-on-flash-bbt : boolean, to enable the on-flash BBT for this chip-select. See nand-controller.yaml - brcm,nand-oob-sector-size : integer, to denote the spare area sector size diff --git a/dts/Bindings/mtd/cadence-quadspi.txt b/dts/Bindings/mtd/cadence-quadspi.txt index 4345c3a6f5..945be7d5b2 100644 --- a/dts/Bindings/mtd/cadence-quadspi.txt +++ b/dts/Bindings/mtd/cadence-quadspi.txt @@ -35,6 +35,9 @@ custom properties: (qspi_n_ss_out). - cdns,tslch-ns : Delay in nanoseconds between setting qspi_n_ss_out low and first bit transfer. +- resets : Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. +- reset-names : Must include either "qspi" and/or "qspi-ocp". Example: @@ -50,6 +53,8 @@ Example: cdns,fifo-depth = <128>; cdns,fifo-width = <4>; cdns,trigger-address = <0x00000000>; + resets = <&rst QSPI_RESET>, <&rst QSPI_OCP_RESET>; + reset-names = "qspi", "qspi-ocp"; flash0: n25q00@0 { ... diff --git a/dts/Bindings/mtd/cypress,hyperflash.txt b/dts/Bindings/mtd/cypress,hyperflash.txt new file mode 100644 index 0000000000..ad42f4db32 --- /dev/null +++ b/dts/Bindings/mtd/cypress,hyperflash.txt @@ -0,0 +1,13 @@ +Bindings for HyperFlash NOR flash chips compliant with Cypress HyperBus +specification and supports Cypress CFI specification 1.5 command set. + +Required properties: +- compatible : "cypress,hyperflash", "cfi-flash" for HyperFlash NOR chips +- reg : Address of flash's memory map + +Example: + + flash@0 { + compatible = "cypress,hyperflash", "cfi-flash"; + reg = <0x0 0x4000000>; + }; diff --git a/dts/Bindings/mtd/nand-controller.yaml b/dts/Bindings/mtd/nand-controller.yaml index 199ba5ac2a..d261b7096c 100644 --- a/dts/Bindings/mtd/nand-controller.yaml +++ b/dts/Bindings/mtd/nand-controller.yaml @@ -40,6 +40,7 @@ properties: patternProperties: "^nand@[a-f0-9]$": + type: object properties: reg: description: diff --git a/dts/Bindings/mtd/stm32-quadspi.txt b/dts/Bindings/mtd/stm32-quadspi.txt deleted file mode 100644 index ddd18c1351..0000000000 --- a/dts/Bindings/mtd/stm32-quadspi.txt +++ /dev/null @@ -1,43 +0,0 @@ -* STMicroelectronics Quad Serial Peripheral Interface(QuadSPI) - -Required properties: -- compatible: should be "st,stm32f469-qspi" -- reg: the first contains the register location and length. - the second contains the memory mapping address and length -- reg-names: should contain the reg names "qspi" "qspi_mm" -- interrupts: should contain the interrupt for the device -- clocks: the phandle of the clock needed by the QSPI controller -- A pinctrl must be defined to set pins in mode of operation for QSPI transfer - -Optional properties: -- resets: must contain the phandle to the reset controller. - -A spi flash must be a child of the nor_flash node and could have some -properties. Also see jedec,spi-nor.txt. - -Required properties: -- reg: chip-Select number (QSPI controller may connect 2 nor flashes) -- spi-max-frequency: max frequency of spi bus - -Optional property: -- spi-rx-bus-width: see ../spi/spi-bus.txt for the description - -Example: - -qspi: spi@a0001000 { - compatible = "st,stm32f469-qspi"; - reg = <0xa0001000 0x1000>, <0x90000000 0x10000000>; - reg-names = "qspi", "qspi_mm"; - interrupts = <91>; - resets = <&rcc STM32F4_AHB3_RESET(QSPI)>; - clocks = <&rcc 0 STM32F4_AHB3_CLOCK(QSPI)>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_qspi0>; - - flash@0 { - reg = <0>; - spi-rx-bus-width = <4>; - spi-max-frequency = <108000000>; - ... - }; -}; diff --git a/dts/Bindings/mtd/ti,am654-hbmc.txt b/dts/Bindings/mtd/ti,am654-hbmc.txt new file mode 100644 index 0000000000..faa81c2e5d --- /dev/null +++ b/dts/Bindings/mtd/ti,am654-hbmc.txt @@ -0,0 +1,51 @@ +Bindings for HyperBus Memory Controller (HBMC) on TI's K3 family of SoCs + +Required properties: +- compatible : "ti,am654-hbmc" for AM654 SoC +- reg : Two entries: + First entry pointed to the register space of HBMC controller + Second entry pointing to the memory map region dedicated for + MMIO access to attached flash devices +- ranges : Address translation from offset within CS to allocated MMIO + space in SoC + +Optional properties: +- mux-controls : phandle to the multiplexer that controls selection of + HBMC vs OSPI inside Flash SubSystem (FSS). Default is OSPI, + if property is absent. + See Documentation/devicetree/bindings/mux/reg-mux.txt + for mmio-mux binding details + +Example: + + system-controller@47000000 { + compatible = "syscon", "simple-mfd"; + reg = <0x0 0x47000000 0x0 0x100>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + hbmc_mux: multiplexer { + compatible = "mmio-mux"; + #mux-control-cells = <1>; + mux-reg-masks = <0x4 0x2>; /* 0: reg 0x4, bit 1 */ + }; + }; + + hbmc: hyperbus@47034000 { + compatible = "ti,am654-hbmc"; + reg = <0x0 0x47034000 0x0 0x100>, + <0x5 0x00000000 0x1 0x0000000>; + power-domains = <&k3_pds 55>; + #address-cells = <2>; + #size-cells = <1>; + ranges = <0x0 0x0 0x5 0x00000000 0x4000000>, /* CS0 - 64MB */ + <0x1 0x0 0x5 0x04000000 0x4000000>; /* CS1 - 64MB */ + mux-controls = <&hbmc_mux 0>; + + /* Slave flash node */ + flash@0,0 { + compatible = "cypress,hyperflash", "cfi-flash"; + reg = <0x0 0x0 0x4000000>; + }; + }; diff --git a/dts/Bindings/mux/mmio-mux.txt b/dts/Bindings/mux/mmio-mux.txt deleted file mode 100644 index a9bfb4d8b6..0000000000 --- a/dts/Bindings/mux/mmio-mux.txt +++ /dev/null @@ -1,60 +0,0 @@ -MMIO register bitfield-based multiplexer controller bindings - -Define register bitfields to be used to control multiplexers. The parent -device tree node must be a syscon node to provide register access. - -Required properties: -- compatible : "mmio-mux" -- #mux-control-cells : <1> -- mux-reg-masks : an array of register offset and pre-shifted bitfield mask - pairs, each describing a single mux control. -* Standard mux-controller bindings as decribed in mux-controller.txt - -Optional properties: -- idle-states : if present, the state the muxes will have when idle. The - special state MUX_IDLE_AS_IS is the default. - -The multiplexer state of each multiplexer is defined as the value of the -bitfield described by the corresponding register offset and bitfield mask pair -in the mux-reg-masks array, accessed through the parent syscon. - -Example: - - syscon { - compatible = "syscon"; - - mux: mux-controller { - compatible = "mmio-mux"; - #mux-control-cells = <1>; - - mux-reg-masks = <0x3 0x30>, /* 0: reg 0x3, bits 5:4 */ - <0x3 0x40>, /* 1: reg 0x3, bit 6 */ - idle-states = <MUX_IDLE_AS_IS>, <0>; - }; - }; - - video-mux { - compatible = "video-mux"; - mux-controls = <&mux 0>; - - ports { - /* inputs 0..3 */ - port@0 { - reg = <0>; - }; - port@1 { - reg = <1>; - }; - port@2 { - reg = <2>; - }; - port@3 { - reg = <3>; - }; - - /* output */ - port@4 { - reg = <4>; - }; - }; - }; diff --git a/dts/Bindings/mux/reg-mux.txt b/dts/Bindings/mux/reg-mux.txt new file mode 100644 index 0000000000..4afd7ba73d --- /dev/null +++ b/dts/Bindings/mux/reg-mux.txt @@ -0,0 +1,129 @@ +Generic register bitfield-based multiplexer controller bindings + +Define register bitfields to be used to control multiplexers. The parent +device tree node must be a device node to provide register r/w access. + +Required properties: +- compatible : should be one of + "reg-mux" : if parent device of mux controller is not syscon device + "mmio-mux" : if parent device of mux controller is syscon device +- #mux-control-cells : <1> +- mux-reg-masks : an array of register offset and pre-shifted bitfield mask + pairs, each describing a single mux control. +* Standard mux-controller bindings as decribed in mux-controller.txt + +Optional properties: +- idle-states : if present, the state the muxes will have when idle. The + special state MUX_IDLE_AS_IS is the default. + +The multiplexer state of each multiplexer is defined as the value of the +bitfield described by the corresponding register offset and bitfield mask +pair in the mux-reg-masks array. + +Example 1: +The parent device of mux controller is not a syscon device. + +&i2c0 { + fpga@66 { // fpga connected to i2c + compatible = "fsl,lx2160aqds-fpga", "fsl,fpga-qixis-i2c", + "simple-mfd"; + reg = <0x66>; + + mux: mux-controller { + compatible = "reg-mux"; + #mux-control-cells = <1>; + mux-reg-masks = <0x54 0xf8>, /* 0: reg 0x54, bits 7:3 */ + <0x54 0x07>; /* 1: reg 0x54, bits 2:0 */ + }; + }; +}; + +mdio-mux-1 { + compatible = "mdio-mux-multiplexer"; + mux-controls = <&mux 0>; + mdio-parent-bus = <&emdio1>; + #address-cells = <1>; + #size-cells = <0>; + + mdio@0 { + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + mdio@8 { + reg = <0x8>; + #address-cells = <1>; + #size-cells = <0>; + }; + + .. + .. +}; + +mdio-mux-2 { + compatible = "mdio-mux-multiplexer"; + mux-controls = <&mux 1>; + mdio-parent-bus = <&emdio2>; + #address-cells = <1>; + #size-cells = <0>; + + mdio@0 { + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + mdio@1 { + reg = <0x1>; + #address-cells = <1>; + #size-cells = <0>; + }; + + .. + .. +}; + +Example 2: +The parent device of mux controller is syscon device. + +syscon { + compatible = "syscon"; + + mux: mux-controller { + compatible = "mmio-mux"; + #mux-control-cells = <1>; + + mux-reg-masks = <0x3 0x30>, /* 0: reg 0x3, bits 5:4 */ + <0x3 0x40>, /* 1: reg 0x3, bit 6 */ + idle-states = <MUX_IDLE_AS_IS>, <0>; + }; +}; + +video-mux { + compatible = "video-mux"; + mux-controls = <&mux 0>; + #address-cells = <1>; + #size-cells = <0>; + + ports { + /* inputs 0..3 */ + port@0 { + reg = <0>; + }; + port@1 { + reg = <1>; + }; + port@2 { + reg = <2>; + }; + port@3 { + reg = <3>; + }; + + /* output */ + port@4 { + reg = <4>; + }; + }; +}; diff --git a/dts/Bindings/net/allwinner,sun4i-a10-emac.yaml b/dts/Bindings/net/allwinner,sun4i-a10-emac.yaml new file mode 100644 index 0000000000..792196bf4a --- /dev/null +++ b/dts/Bindings/net/allwinner,sun4i-a10-emac.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/allwinner,sun4i-a10-emac.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A10 EMAC Ethernet Controller Device Tree Bindings + +allOf: + - $ref: "ethernet-controller.yaml#" + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <maxime.ripard@bootlin.com> + +properties: + compatible: + const: allwinner,sun4i-a10-emac + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + allwinner,sram: + description: Phandle to the device SRAM + $ref: /schemas/types.yaml#/definitions/phandle-array + +required: + - compatible + - reg + - interrupts + - clocks + - phy-handle + - allwinner,sram + +examples: + - | + emac: ethernet@1c0b000 { + compatible = "allwinner,sun4i-a10-emac"; + reg = <0x01c0b000 0x1000>; + interrupts = <55>; + clocks = <&ahb_gates 17>; + phy-handle = <&phy0>; + allwinner,sram = <&emac_sram 1>; + }; + +# FIXME: We should set it, but it would report all the generic +# properties as additional properties. +# additionalProperties: false + +... diff --git a/dts/Bindings/net/allwinner,sun4i-a10-mdio.yaml b/dts/Bindings/net/allwinner,sun4i-a10-mdio.yaml new file mode 100644 index 0000000000..df24d9d969 --- /dev/null +++ b/dts/Bindings/net/allwinner,sun4i-a10-mdio.yaml @@ -0,0 +1,70 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/allwinner,sun4i-a10-mdio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A10 MDIO Controller Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <maxime.ripard@bootlin.com> + +allOf: + - $ref: "mdio.yaml#" + +# Select every compatible, including the deprecated ones. This way, we +# will be able to report a warning when we have that compatible, since +# we will validate the node thanks to the select, but won't report it +# as a valid value in the compatible property description +select: + properties: + compatible: + enum: + - allwinner,sun4i-a10-mdio + + # Deprecated + - allwinner,sun4i-mdio + + required: + - compatible + +properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + compatible: + const: allwinner,sun4i-a10-mdio + + reg: + maxItems: 1 + + phy-supply: + description: PHY regulator + +required: + - compatible + - reg + +examples: + - | + mdio@1c0b080 { + compatible = "allwinner,sun4i-a10-mdio"; + reg = <0x01c0b080 0x14>; + #address-cells = <1>; + #size-cells = <0>; + phy-supply = <®_emac_3v3>; + + phy0: ethernet-phy@0 { + reg = <0>; + }; + }; + +# FIXME: We should set it, but it would report all the generic +# properties as additional properties. +# additionalProperties: false + +... diff --git a/dts/Bindings/net/allwinner,sun4i-emac.txt b/dts/Bindings/net/allwinner,sun4i-emac.txt deleted file mode 100644 index e98118aef5..0000000000 --- a/dts/Bindings/net/allwinner,sun4i-emac.txt +++ /dev/null @@ -1,19 +0,0 @@ -* Allwinner EMAC ethernet controller - -Required properties: -- compatible: should be "allwinner,sun4i-a10-emac" (Deprecated: - "allwinner,sun4i-emac") -- reg: address and length of the register set for the device. -- interrupts: interrupt for the device -- phy: see ethernet.txt file in the same directory. -- clocks: A phandle to the reference clock for this device - -Example: - -emac: ethernet@1c0b000 { - compatible = "allwinner,sun4i-a10-emac"; - reg = <0x01c0b000 0x1000>; - interrupts = <55>; - clocks = <&ahb_gates 17>; - phy = <&phy0>; -}; diff --git a/dts/Bindings/net/allwinner,sun4i-mdio.txt b/dts/Bindings/net/allwinner,sun4i-mdio.txt deleted file mode 100644 index ab5b8613b0..0000000000 --- a/dts/Bindings/net/allwinner,sun4i-mdio.txt +++ /dev/null @@ -1,27 +0,0 @@ -* Allwinner A10 MDIO Ethernet Controller interface - -Required properties: -- compatible: should be "allwinner,sun4i-a10-mdio" - (Deprecated: "allwinner,sun4i-mdio"). -- reg: address and length of the register set for the device. - -Optional properties: -- phy-supply: phandle to a regulator if the PHY needs one - -Example at the SoC level: -mdio@1c0b080 { - compatible = "allwinner,sun4i-a10-mdio"; - reg = <0x01c0b080 0x14>; - #address-cells = <1>; - #size-cells = <0>; -}; - -And at the board level: - -mdio@1c0b080 { - phy-supply = <®_emac_3v3>; - - phy0: ethernet-phy@0 { - reg = <0>; - }; -}; diff --git a/dts/Bindings/net/allwinner,sun7i-a20-gmac.txt b/dts/Bindings/net/allwinner,sun7i-a20-gmac.txt deleted file mode 100644 index 8b3f953656..0000000000 --- a/dts/Bindings/net/allwinner,sun7i-a20-gmac.txt +++ /dev/null @@ -1,27 +0,0 @@ -* Allwinner GMAC ethernet controller - -This device is a platform glue layer for stmmac. -Please see stmmac.txt for the other unchanged properties. - -Required properties: - - compatible: Should be "allwinner,sun7i-a20-gmac" - - clocks: Should contain the GMAC main clock, and tx clock - The tx clock type should be "allwinner,sun7i-a20-gmac-clk" - - clock-names: Should contain the clock names "stmmaceth", - and "allwinner_gmac_tx" - -Optional properties: -- phy-supply: phandle to a regulator if the PHY needs one - -Examples: - - gmac: ethernet@1c50000 { - compatible = "allwinner,sun7i-a20-gmac"; - reg = <0x01c50000 0x10000>, - <0x01c20164 0x4>; - interrupts = <0 85 1>; - interrupt-names = "macirq"; - clocks = <&ahb_gates 49>, <&gmac_tx>; - clock-names = "stmmaceth", "allwinner_gmac_tx"; - phy-mode = "mii"; - }; diff --git a/dts/Bindings/net/allwinner,sun7i-a20-gmac.yaml b/dts/Bindings/net/allwinner,sun7i-a20-gmac.yaml new file mode 100644 index 0000000000..06b1cc8bea --- /dev/null +++ b/dts/Bindings/net/allwinner,sun7i-a20-gmac.yaml @@ -0,0 +1,65 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/allwinner,sun7i-a20-gmac.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A20 GMAC Device Tree Bindings + +allOf: + - $ref: "snps,dwmac.yaml#" + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <maxime.ripard@bootlin.com> + +properties: + compatible: + const: allwinner,sun7i-a20-gmac + + interrupts: + maxItems: 1 + + interrupt-names: + const: macirq + + clocks: + items: + - description: GMAC main clock + - description: TX clock + + clock-names: + items: + - const: stmmaceth + - const: allwinner_gmac_tx + + phy-supply: + description: + PHY regulator + +required: + - compatible + - reg + - interrupts + - interrupt-names + - clocks + - clock-names + - phy-mode + +examples: + - | + gmac: ethernet@1c50000 { + compatible = "allwinner,sun7i-a20-gmac"; + reg = <0x01c50000 0x10000>; + interrupts = <0 85 1>; + interrupt-names = "macirq"; + clocks = <&ahb_gates 49>, <&gmac_tx>; + clock-names = "stmmaceth", "allwinner_gmac_tx"; + phy-mode = "mii"; + }; + +# FIXME: We should set it, but it would report all the generic +# properties as additional properties. +# additionalProperties: false + +... diff --git a/dts/Bindings/net/allwinner,sun8i-a83t-emac.yaml b/dts/Bindings/net/allwinner,sun8i-a83t-emac.yaml new file mode 100644 index 0000000000..3fb0714e76 --- /dev/null +++ b/dts/Bindings/net/allwinner,sun8i-a83t-emac.yaml @@ -0,0 +1,321 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/allwinner,sun8i-a83t-emac.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A83t EMAC Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <maxime.ripard@bootlin.com> + +properties: + compatible: + oneOf: + - const: allwinner,sun8i-a83t-emac + - const: allwinner,sun8i-h3-emac + - const: allwinner,sun8i-r40-emac + - const: allwinner,sun8i-v3s-emac + - const: allwinner,sun50i-a64-emac + - items: + - const: allwinner,sun50i-h6-emac + - const: allwinner,sun50i-a64-emac + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + interrupt-names: + const: macirq + + clocks: + maxItems: 1 + + clock-names: + const: stmmaceth + + syscon: + $ref: /schemas/types.yaml#definitions/phandle + description: + Phandle to the device containing the EMAC or GMAC clock + register + +required: + - compatible + - reg + - interrupts + - interrupt-names + - clocks + - clock-names + - resets + - reset-names + - phy-handle + - phy-mode + - syscon + +allOf: + - $ref: "snps,dwmac.yaml#" + - if: + properties: + compatible: + contains: + enum: + - allwinner,sun8i-a83t-emac + - allwinner,sun8i-h3-emac + - allwinner,sun8i-v3s-emac + - allwinner,sun50i-a64-emac + + then: + properties: + allwinner,tx-delay-ps: + default: 0 + minimum: 0 + maximum: 700 + multipleOf: 100 + description: + External RGMII PHY TX clock delay chain value in ps. + + allwinner,rx-delay-ps: + default: 0 + minimum: 0 + maximum: 3100 + multipleOf: 100 + description: + External RGMII PHY TX clock delay chain value in ps. + + - if: + properties: + compatible: + contains: + enum: + - allwinner,sun8i-r40-emac + + then: + properties: + allwinner,rx-delay-ps: + default: 0 + minimum: 0 + maximum: 700 + multipleOf: 100 + description: + External RGMII PHY TX clock delay chain value in ps. + + - if: + properties: + compatible: + contains: + enum: + - allwinner,sun8i-h3-emac + - allwinner,sun8i-v3s-emac + + then: + properties: + allwinner,leds-active-low: + $ref: /schemas/types.yaml#definitions/flag + description: + EPHY LEDs are active low. + + mdio-mux: + type: object + + properties: + compatible: + const: allwinner,sun8i-h3-mdio-mux + + mdio-parent-bus: + $ref: /schemas/types.yaml#definitions/phandle + description: + Phandle to EMAC MDIO. + + mdio@1: + type: object + description: Internal MDIO Bus + + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + compatible: + const: allwinner,sun8i-h3-mdio-internal + + reg: + const: 1 + + patternProperties: + "^ethernet-phy@[0-9a-f]$": + type: object + description: + Integrated PHY node + + properties: + clocks: + maxItems: 1 + + resets: + maxItems: 1 + + required: + - clocks + - resets + + + mdio@2: + type: object + description: External MDIO Bus (H3 only) + + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + reg: + const: 2 + + required: + - compatible + - mdio-parent-bus + - mdio@1 + +examples: + - | + ethernet@1c0b000 { + compatible = "allwinner,sun8i-h3-emac"; + syscon = <&syscon>; + reg = <0x01c0b000 0x104>; + interrupts = <0 82 1>; + interrupt-names = "macirq"; + resets = <&ccu 12>; + reset-names = "stmmaceth"; + clocks = <&ccu 27>; + clock-names = "stmmaceth"; + + phy-handle = <&int_mii_phy>; + phy-mode = "mii"; + allwinner,leds-active-low; + + mdio1: mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + }; + + mdio-mux { + compatible = "allwinner,sun8i-h3-mdio-mux"; + #address-cells = <1>; + #size-cells = <0>; + + mdio-parent-bus = <&mdio1>; + + int_mii_phy: mdio@1 { + compatible = "allwinner,sun8i-h3-mdio-internal"; + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + ethernet-phy@1 { + reg = <1>; + clocks = <&ccu 67>; + resets = <&ccu 39>; + phy-is-integrated; + }; + }; + + mdio@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + }; + + - | + ethernet@1c0b000 { + compatible = "allwinner,sun8i-h3-emac"; + syscon = <&syscon>; + reg = <0x01c0b000 0x104>; + interrupts = <0 82 1>; + interrupt-names = "macirq"; + resets = <&ccu 12>; + reset-names = "stmmaceth"; + clocks = <&ccu 27>; + clock-names = "stmmaceth"; + + phy-handle = <&ext_rgmii_phy>; + phy-mode = "rgmii"; + allwinner,leds-active-low; + + mdio2: mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + }; + + mdio-mux { + compatible = "allwinner,sun8i-h3-mdio-mux"; + #address-cells = <1>; + #size-cells = <0>; + mdio-parent-bus = <&mdio2>; + + mdio@1 { + compatible = "allwinner,sun8i-h3-mdio-internal"; + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + ethernet-phy@1 { + reg = <1>; + clocks = <&ccu 67>; + resets = <&ccu 39>; + }; + }; + + mdio@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + + ext_rgmii_phy: ethernet-phy@1 { + reg = <1>; + }; + }; + }; + }; + + - | + ethernet@1c0b000 { + compatible = "allwinner,sun8i-a83t-emac"; + syscon = <&syscon>; + reg = <0x01c0b000 0x104>; + interrupts = <0 82 1>; + interrupt-names = "macirq"; + resets = <&ccu 13>; + reset-names = "stmmaceth"; + clocks = <&ccu 27>; + clock-names = "stmmaceth"; + phy-handle = <&ext_rgmii_phy1>; + phy-mode = "rgmii"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + ext_rgmii_phy1: ethernet-phy@1 { + reg = <1>; + }; + }; + }; + +# FIXME: We should set it, but it would report all the generic +# properties as additional properties. +# additionalProperties: false + +... diff --git a/dts/Bindings/net/can/rcar_can.txt b/dts/Bindings/net/can/rcar_can.txt index 9936b9ee67..b463e1268a 100644 --- a/dts/Bindings/net/can/rcar_can.txt +++ b/dts/Bindings/net/can/rcar_can.txt @@ -6,6 +6,7 @@ Required properties: "renesas,can-r8a7744" if CAN controller is a part of R8A7744 SoC. "renesas,can-r8a7745" if CAN controller is a part of R8A7745 SoC. "renesas,can-r8a774a1" if CAN controller is a part of R8A774A1 SoC. + "renesas,can-r8a774c0" if CAN controller is a part of R8A774C0 SoC. "renesas,can-r8a7778" if CAN controller is a part of R8A7778 SoC. "renesas,can-r8a7779" if CAN controller is a part of R8A7779 SoC. "renesas,can-r8a7790" if CAN controller is a part of R8A7790 SoC. @@ -27,13 +28,8 @@ Required properties: - reg: physical base address and size of the R-Car CAN register map. - interrupts: interrupt specifier for the sole interrupt. -- clocks: phandles and clock specifiers for 2 CAN clock inputs for RZ/G2 - devices. - phandles and clock specifiers for 3 CAN clock inputs for every other - SoC. -- clock-names: 2 clock input name strings for RZ/G2: "clkp1", "can_clk". - 3 clock input name strings for every other SoC: "clkp1", "clkp2", - "can_clk". +- clocks: phandles and clock specifiers for 3 CAN clock inputs. +- clock-names: 3 clock input name strings: "clkp1", "clkp2", and "can_clk". - pinctrl-0: pin control group to be used for this controller. - pinctrl-names: must be "default". @@ -49,8 +45,7 @@ using the below properties: Optional properties: - renesas,can-clock-select: R-Car CAN Clock Source Select. Valid values are: <0x0> (default) : Peripheral clock (clkp1) - <0x1> : Peripheral clock (clkp2) (not supported by - RZ/G2 devices) + <0x1> : Peripheral clock (clkp2) <0x3> : External input clock Example diff --git a/dts/Bindings/net/can/rcar_canfd.txt b/dts/Bindings/net/can/rcar_canfd.txt index ac71daa461..32f051f6d3 100644 --- a/dts/Bindings/net/can/rcar_canfd.txt +++ b/dts/Bindings/net/can/rcar_canfd.txt @@ -3,11 +3,14 @@ Renesas R-Car CAN FD controller Device Tree Bindings Required properties: - compatible: Must contain one or more of the following: - - "renesas,rcar-gen3-canfd" for R-Car Gen3 compatible controller. + - "renesas,rcar-gen3-canfd" for R-Car Gen3 and RZ/G2 compatible controllers. + - "renesas,r8a774c0-canfd" for R8A774C0 (RZ/G2E) compatible controller. - "renesas,r8a7795-canfd" for R8A7795 (R-Car H3) compatible controller. - "renesas,r8a7796-canfd" for R8A7796 (R-Car M3-W) compatible controller. + - "renesas,r8a77965-canfd" for R8A77965 (R-Car M3-N) compatible controller. - "renesas,r8a77970-canfd" for R8A77970 (R-Car V3M) compatible controller. - "renesas,r8a77980-canfd" for R8A77980 (R-Car V3H) compatible controller. + - "renesas,r8a77990-canfd" for R8A77990 (R-Car E3) compatible controller. When compatible with the generic version, nodes must list the SoC-specific version corresponding to the platform first, followed by the @@ -26,12 +29,13 @@ The name of the child nodes are "channel0" and "channel1" respectively. Each child node supports the "status" property only, which is used to enable/disable the respective channel. -Required properties for "renesas,r8a7795-canfd" and "renesas,r8a7796-canfd" +Required properties for "renesas,r8a774c0-canfd", "renesas,r8a7795-canfd", +"renesas,r8a7796-canfd", "renesas,r8a77965-canfd", and "renesas,r8a77990-canfd" compatible: -In R8A7795 and R8A7796 SoCs, canfd clock is a div6 clock and can be used by both -CAN and CAN FD controller at the same time. It needs to be scaled to maximum -frequency if any of these controllers use it. This is done using the below -properties: +In R8A774C0, R8A7795, R8A7796, R8A77965, and R8A77990 SoCs, canfd clock is a +div6 clock and can be used by both CAN and CAN FD controller at the same time. +It needs to be scaled to maximum frequency if any of these controllers use it. +This is done using the below properties: - assigned-clocks: phandle of canfd clock. - assigned-clock-rates: maximum frequency of this clock. diff --git a/dts/Bindings/net/dsa/ksz.txt b/dts/Bindings/net/dsa/ksz.txt index e7db7268fd..4ac21cef37 100644 --- a/dts/Bindings/net/dsa/ksz.txt +++ b/dts/Bindings/net/dsa/ksz.txt @@ -16,6 +16,8 @@ Required properties: Optional properties: - reset-gpios : Should be a gpio specifier for a reset line +- microchip,synclko-125 : Set if the output SYNCLKO frequency should be set to + 125MHz instead of 25MHz. See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of additional required and optional properties. diff --git a/dts/Bindings/net/dsa/marvell.txt b/dts/Bindings/net/dsa/marvell.txt index feb007af13..6f9538974b 100644 --- a/dts/Bindings/net/dsa/marvell.txt +++ b/dts/Bindings/net/dsa/marvell.txt @@ -21,10 +21,13 @@ which is at a different MDIO base address in different switch families. 6341, 6350, 6351, 6352 - "marvell,mv88e6190" : Switch has base address 0x00. Use with models: 6190, 6190X, 6191, 6290, 6390, 6390X +- "marvell,mv88e6250" : Switch has base address 0x08 or 0x18. Use with model: + 6250 Required properties: -- compatible : Should be one of "marvell,mv88e6085" or - "marvell,mv88e6190" as indicated above +- compatible : Should be one of "marvell,mv88e6085", + "marvell,mv88e6190" or "marvell,mv88e6250" as + indicated above - reg : Address on the MII bus for the switch. Optional properties: diff --git a/dts/Bindings/net/dsa/qca8k.txt b/dts/Bindings/net/dsa/qca8k.txt index 93a7469e70..ccbc6d8932 100644 --- a/dts/Bindings/net/dsa/qca8k.txt +++ b/dts/Bindings/net/dsa/qca8k.txt @@ -9,6 +9,10 @@ Required properties: - #size-cells: must be 0 - #address-cells: must be 1 +Optional properties: + +- reset-gpios: GPIO to be used to reset the whole device + Subnodes: The integrated switch subnode should be specified according to the binding @@ -66,6 +70,7 @@ for the external mdio-bus configuration: #address-cells = <1>; #size-cells = <0>; + reset-gpios = <&gpio 42 GPIO_ACTIVE_LOW>; reg = <0x10>; ports { @@ -123,6 +128,7 @@ for the internal master mdio-bus configuration: #address-cells = <1>; #size-cells = <0>; + reset-gpios = <&gpio 42 GPIO_ACTIVE_LOW>; reg = <0x10>; ports { diff --git a/dts/Bindings/net/dsa/vitesse,vsc73xx.txt b/dts/Bindings/net/dsa/vitesse,vsc73xx.txt index ed4710c406..bbf4a13f6d 100644 --- a/dts/Bindings/net/dsa/vitesse,vsc73xx.txt +++ b/dts/Bindings/net/dsa/vitesse,vsc73xx.txt @@ -2,8 +2,8 @@ Vitesse VSC73xx Switches ======================== This defines device tree bindings for the Vitesse VSC73xx switch chips. -The Vitesse company has been acquired by Microsemi and Microsemi in turn -acquired by Microchip but retains this vendor branding. +The Vitesse company has been acquired by Microsemi and Microsemi has +been acquired Microchip but retains this vendor branding. The currently supported switch chips are: Vitesse VSC7385 SparX-G5 5+1-port Integrated Gigabit Ethernet Switch @@ -11,8 +11,14 @@ Vitesse VSC7388 SparX-G8 8-port Integrated Gigabit Ethernet Switch Vitesse VSC7395 SparX-G5e 5+1-port Integrated Gigabit Ethernet Switch Vitesse VSC7398 SparX-G8e 8-port Integrated Gigabit Ethernet Switch -The device tree node is an SPI device so it must reside inside a SPI bus -device tree node, see spi/spi-bus.txt +This switch could have two different management interface. + +If SPI interface is used, the device tree node is an SPI device so it must +reside inside a SPI bus device tree node, see spi/spi-bus.txt + +When the chip is connected to a parallel memory bus and work in memory-mapped +I/O mode, a platform device is used to represent the vsc73xx. In this case it +must reside inside a platform bus device tree node. Required properties: @@ -38,6 +44,7 @@ and subnodes of DSA switches. Examples: +SPI: switch@0 { compatible = "vitesse,vsc7395"; reg = <0>; @@ -79,3 +86,46 @@ switch@0 { }; }; }; + +Platform: +switch@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "vitesse,vsc7385"; + reg = <0x2 0x0 0x20000>; + reset-gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan1"; + }; + port@1 { + reg = <1>; + label = "lan2"; + }; + port@2 { + reg = <2>; + label = "lan3"; + }; + port@3 { + reg = <3>; + label = "lan4"; + }; + vsc: port@6 { + reg = <6>; + label = "cpu"; + ethernet = <&enet0>; + phy-mode = "rgmii"; + fixed-link { + speed = <1000>; + full-duplex; + pause; + }; + }; + }; + +}; diff --git a/dts/Bindings/net/dwmac-sun8i.txt b/dts/Bindings/net/dwmac-sun8i.txt deleted file mode 100644 index 54c66d0611..0000000000 --- a/dts/Bindings/net/dwmac-sun8i.txt +++ /dev/null @@ -1,201 +0,0 @@ -* Allwinner sun8i GMAC ethernet controller - -This device is a platform glue layer for stmmac. -Please see stmmac.txt for the other unchanged properties. - -Required properties: -- compatible: must be one of the following string: - "allwinner,sun8i-a83t-emac" - "allwinner,sun8i-h3-emac" - "allwinner,sun8i-r40-gmac" - "allwinner,sun8i-v3s-emac" - "allwinner,sun50i-a64-emac" - "allwinner,sun50i-h6-emac", "allwinner-sun50i-a64-emac" -- reg: address and length of the register for the device. -- interrupts: interrupt for the device -- interrupt-names: must be "macirq" -- clocks: A phandle to the reference clock for this device -- clock-names: must be "stmmaceth" -- resets: A phandle to the reset control for this device -- reset-names: must be "stmmaceth" -- phy-mode: See ethernet.txt -- phy-handle: See ethernet.txt -- syscon: A phandle to the device containing the EMAC or GMAC clock register - -Optional properties: -- allwinner,tx-delay-ps: TX clock delay chain value in ps. - Range is 0-700. Default is 0. - Unavailable for allwinner,sun8i-r40-gmac -- allwinner,rx-delay-ps: RX clock delay chain value in ps. - Range is 0-3100. Default is 0. - Range is 0-700 for allwinner,sun8i-r40-gmac -Both delay properties need to be a multiple of 100. They control the -clock delay for external RGMII PHY. They do not apply to the internal -PHY or external non-RGMII PHYs. - -Optional properties for the following compatibles: - - "allwinner,sun8i-h3-emac", - - "allwinner,sun8i-v3s-emac": -- allwinner,leds-active-low: EPHY LEDs are active low - -Required child node of emac: -- mdio bus node: should be named mdio with compatible "snps,dwmac-mdio" - -Required properties of the mdio node: -- #address-cells: shall be 1 -- #size-cells: shall be 0 - -The device node referenced by "phy" or "phy-handle" must be a child node -of the mdio node. See phy.txt for the generic PHY bindings. - -The following compatibles require that the emac node have a mdio-mux child -node called "mdio-mux": - - "allwinner,sun8i-h3-emac" - - "allwinner,sun8i-v3s-emac": -Required properties for the mdio-mux node: - - compatible = "allwinner,sun8i-h3-mdio-mux" - - mdio-parent-bus: a phandle to EMAC mdio - - one child mdio for the integrated mdio with the compatible - "allwinner,sun8i-h3-mdio-internal" - - one child mdio for the external mdio if present (V3s have none) -Required properties for the mdio-mux children node: - - reg: 1 for internal MDIO bus, 2 for external MDIO bus - -The following compatibles require a PHY node representing the integrated -PHY, under the integrated MDIO bus node if an mdio-mux node is used: - - "allwinner,sun8i-h3-emac", - - "allwinner,sun8i-v3s-emac": - -Additional information regarding generic multiplexer properties can be found -at Documentation/devicetree/bindings/net/mdio-mux.txt - -Required properties of the integrated phy node: -- clocks: a phandle to the reference clock for the EPHY -- resets: a phandle to the reset control for the EPHY -- Must be a child of the integrated mdio - -Example with integrated PHY: -emac: ethernet@1c0b000 { - compatible = "allwinner,sun8i-h3-emac"; - syscon = <&syscon>; - reg = <0x01c0b000 0x104>; - interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "macirq"; - resets = <&ccu RST_BUS_EMAC>; - reset-names = "stmmaceth"; - clocks = <&ccu CLK_BUS_EMAC>; - clock-names = "stmmaceth"; - - phy-handle = <&int_mii_phy>; - phy-mode = "mii"; - allwinner,leds-active-low; - - mdio: mdio { - #address-cells = <1>; - #size-cells = <0>; - compatible = "snps,dwmac-mdio"; - }; - - mdio-mux { - compatible = "mdio-mux", "allwinner,sun8i-h3-mdio-mux"; - #address-cells = <1>; - #size-cells = <0>; - - mdio-parent-bus = <&mdio>; - - int_mdio: mdio@1 { - compatible = "allwinner,sun8i-h3-mdio-internal"; - reg = <1>; - #address-cells = <1>; - #size-cells = <0>; - int_mii_phy: ethernet-phy@1 { - reg = <1>; - clocks = <&ccu CLK_BUS_EPHY>; - resets = <&ccu RST_BUS_EPHY>; - phy-is-integrated; - }; - }; - ext_mdio: mdio@2 { - reg = <2>; - #address-cells = <1>; - #size-cells = <0>; - }; - }; -}; - -Example with external PHY: -emac: ethernet@1c0b000 { - compatible = "allwinner,sun8i-h3-emac"; - syscon = <&syscon>; - reg = <0x01c0b000 0x104>; - interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "macirq"; - resets = <&ccu RST_BUS_EMAC>; - reset-names = "stmmaceth"; - clocks = <&ccu CLK_BUS_EMAC>; - clock-names = "stmmaceth"; - - phy-handle = <&ext_rgmii_phy>; - phy-mode = "rgmii"; - allwinner,leds-active-low; - - mdio: mdio { - #address-cells = <1>; - #size-cells = <0>; - compatible = "snps,dwmac-mdio"; - }; - - mdio-mux { - compatible = "allwinner,sun8i-h3-mdio-mux"; - #address-cells = <1>; - #size-cells = <0>; - - mdio-parent-bus = <&mdio>; - - int_mdio: mdio@1 { - compatible = "allwinner,sun8i-h3-mdio-internal"; - reg = <1>; - #address-cells = <1>; - #size-cells = <0>; - int_mii_phy: ethernet-phy@1 { - reg = <1>; - clocks = <&ccu CLK_BUS_EPHY>; - resets = <&ccu RST_BUS_EPHY>; - }; - }; - ext_mdio: mdio@2 { - reg = <2>; - #address-cells = <1>; - #size-cells = <0>; - ext_rgmii_phy: ethernet-phy@1 { - reg = <1>; - }; - }: - }; -}; - -Example with SoC without integrated PHY - -emac: ethernet@1c0b000 { - compatible = "allwinner,sun8i-a83t-emac"; - syscon = <&syscon>; - reg = <0x01c0b000 0x104>; - interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "macirq"; - resets = <&ccu RST_BUS_EMAC>; - reset-names = "stmmaceth"; - clocks = <&ccu CLK_BUS_EMAC>; - clock-names = "stmmaceth"; - - phy-handle = <&ext_rgmii_phy>; - phy-mode = "rgmii"; - - mdio: mdio { - compatible = "snps,dwmac-mdio"; - #address-cells = <1>; - #size-cells = <0>; - ext_rgmii_phy: ethernet-phy@1 { - reg = <1>; - }; - }; -}; diff --git a/dts/Bindings/net/ethernet-controller.yaml b/dts/Bindings/net/ethernet-controller.yaml new file mode 100644 index 0000000000..0e7c31794a --- /dev/null +++ b/dts/Bindings/net/ethernet-controller.yaml @@ -0,0 +1,206 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/ethernet-controller.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ethernet Controller Generic Binding + +maintainers: + - David S. Miller <davem@davemloft.net> + +properties: + $nodename: + pattern: "^ethernet(@.*)?$" + + local-mac-address: + allOf: + - $ref: /schemas/types.yaml#definitions/uint8-array + - items: + - minItems: 6 + maxItems: 6 + description: + Specifies the MAC address that was assigned to the network device. + + mac-address: + allOf: + - $ref: /schemas/types.yaml#definitions/uint8-array + - items: + - minItems: 6 + maxItems: 6 + description: + Specifies the MAC address that was last used by the boot + program; should be used in cases where the MAC address assigned + to the device by the boot program is different from the + local-mac-address property. + + max-frame-size: + $ref: /schemas/types.yaml#definitions/uint32 + description: + Maximum transfer unit (IEEE defined MTU), rather than the + maximum frame size (there\'s contradiction in the Devicetree + Specification). + + max-speed: + $ref: /schemas/types.yaml#definitions/uint32 + description: + Specifies maximum speed in Mbit/s supported by the device. + + nvmem-cells: + maxItems: 1 + description: + Reference to an nvmem node for the MAC address + + nvmem-cells-names: + const: mac-address + + phy-connection-type: + description: + Operation mode of the PHY interface + enum: + # There is not a standard bus between the MAC and the PHY, + # something proprietary is being used to embed the PHY in the + # MAC. + - internal + - mii + - gmii + - sgmii + - qsgmii + - tbi + - rev-mii + - rmii + + # RX and TX delays are added by the MAC when required + - rgmii + + # RGMII with internal RX and TX delays provided by the PHY, + # the MAC should not add the RX or TX delays in this case + - rgmii-id + + # RGMII with internal RX delay provided by the PHY, the MAC + # should not add an RX delay in this case + - rgmii-rxid + + # RGMII with internal TX delay provided by the PHY, the MAC + # should not add an TX delay in this case + - rgmii-txid + - rtbi + - smii + - xgmii + - trgmii + - 1000base-x + - 2500base-x + - rxaui + - xaui + + # 10GBASE-KR, XFI, SFI + - 10gbase-kr + - usxgmii + + phy-mode: + $ref: "#/properties/phy-connection-type" + + phy-handle: + $ref: /schemas/types.yaml#definitions/phandle + description: + Specifies a reference to a node representing a PHY device. + + phy: + $ref: "#/properties/phy-handle" + deprecated: true + + phy-device: + $ref: "#/properties/phy-handle" + deprecated: true + + rx-fifo-depth: + $ref: /schemas/types.yaml#definitions/uint32 + description: + The size of the controller\'s receive fifo in bytes. This is used + for components that can have configurable receive fifo sizes, + and is useful for determining certain configuration settings + such as flow control thresholds. + + tx-fifo-depth: + $ref: /schemas/types.yaml#definitions/uint32 + description: + The size of the controller\'s transmit fifo in bytes. This + is used for components that can have configurable fifo sizes. + + managed: + allOf: + - $ref: /schemas/types.yaml#definitions/string + - default: auto + enum: + - auto + - in-band-status + description: + Specifies the PHY management type. If auto is set and fixed-link + is not specified, it uses MDIO for management. + + fixed-link: + allOf: + - if: + type: array + then: + deprecated: true + minItems: 1 + maxItems: 1 + items: + items: + - minimum: 0 + maximum: 31 + description: + Emulated PHY ID, choose any but unique to the all + specified fixed-links + + - enum: [0, 1] + description: + Duplex configuration. 0 for half duplex or 1 for + full duplex + + - enum: [10, 100, 1000] + description: + Link speed in Mbits/sec. + + - enum: [0, 1] + description: + Pause configuration. 0 for no pause, 1 for pause + + - enum: [0, 1] + description: + Asymmetric pause configuration. 0 for no asymmetric + pause, 1 for asymmetric pause + + + - if: + type: object + then: + properties: + speed: + allOf: + - $ref: /schemas/types.yaml#definitions/uint32 + - enum: [10, 100, 1000] + description: + Link speed. + + full-duplex: + $ref: /schemas/types.yaml#definitions/flag + description: + Indicates that full-duplex is used. When absent, half + duplex is assumed. + + asym-pause: + $ref: /schemas/types.yaml#definitions/flag + description: + Indicates that asym_pause should be enabled. + + link-gpios: + maxItems: 1 + description: + GPIO to determine if the link is up + + required: + - speed + +... diff --git a/dts/Bindings/net/ethernet-phy.yaml b/dts/Bindings/net/ethernet-phy.yaml new file mode 100644 index 0000000000..f70f18ff82 --- /dev/null +++ b/dts/Bindings/net/ethernet-phy.yaml @@ -0,0 +1,177 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/ethernet-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ethernet PHY Generic Binding + +maintainers: + - Andrew Lunn <andrew@lunn.ch> + - Florian Fainelli <f.fainelli@gmail.com> + - Heiner Kallweit <hkallweit1@gmail.com> + +# The dt-schema tools will generate a select statement first by using +# the compatible, and second by using the node name if any. In our +# case, the node name is the one we want to match on, while the +# compatible is optional. +select: + properties: + $nodename: + pattern: "^ethernet-phy(@[a-f0-9]+)?$" + + required: + - $nodename + +properties: + $nodename: + pattern: "^ethernet-phy(@[a-f0-9]+)?$" + + compatible: + oneOf: + - const: ethernet-phy-ieee802.3-c22 + description: PHYs that implement IEEE802.3 clause 22 + - const: ethernet-phy-ieee802.3-c45 + description: PHYs that implement IEEE802.3 clause 45 + - pattern: "^ethernet-phy-id[a-f0-9]{4}\\.[a-f0-9]{4}$" + description: + If the PHY reports an incorrect ID (or none at all) then the + compatible list may contain an entry with the correct PHY ID + in the above form. + The first group of digits is the 16 bit Phy Identifier 1 + register, this is the chip vendor OUI bits 3:18. The + second group of digits is the Phy Identifier 2 register, + this is the chip vendor OUI bits 19:24, followed by 10 + bits of a vendor specific ID. + - items: + - pattern: "^ethernet-phy-id[a-f0-9]{4}\\.[a-f0-9]{4}$" + - const: ethernet-phy-ieee802.3-c45 + + reg: + minimum: 0 + maximum: 31 + description: + The ID number for the PHY. + + interrupts: + maxItems: 1 + + max-speed: + enum: + - 10 + - 100 + - 1000 + - 2500 + - 5000 + - 10000 + - 20000 + - 25000 + - 40000 + - 50000 + - 56000 + - 100000 + - 200000 + description: + Maximum PHY supported speed in Mbits / seconds. + + broken-turn-around: + $ref: /schemas/types.yaml#definitions/flag + description: + If set, indicates the PHY device does not correctly release + the turn around line low at the end of a MDIO transaction. + + enet-phy-lane-swap: + $ref: /schemas/types.yaml#definitions/flag + description: + If set, indicates the PHY will swap the TX/RX lanes to + compensate for the board being designed with the lanes + swapped. + + eee-broken-100tx: + $ref: /schemas/types.yaml#definitions/flag + description: + Mark the corresponding energy efficient ethernet mode as + broken and request the ethernet to stop advertising it. + + eee-broken-1000t: + $ref: /schemas/types.yaml#definitions/flag + description: + Mark the corresponding energy efficient ethernet mode as + broken and request the ethernet to stop advertising it. + + eee-broken-10gt: + $ref: /schemas/types.yaml#definitions/flag + description: + Mark the corresponding energy efficient ethernet mode as + broken and request the ethernet to stop advertising it. + + eee-broken-1000kx: + $ref: /schemas/types.yaml#definitions/flag + description: + Mark the corresponding energy efficient ethernet mode as + broken and request the ethernet to stop advertising it. + + eee-broken-10gkx4: + $ref: /schemas/types.yaml#definitions/flag + description: + Mark the corresponding energy efficient ethernet mode as + broken and request the ethernet to stop advertising it. + + eee-broken-10gkr: + $ref: /schemas/types.yaml#definitions/flag + description: + Mark the corresponding energy efficient ethernet mode as + broken and request the ethernet to stop advertising it. + + phy-is-integrated: + $ref: /schemas/types.yaml#definitions/flag + description: + If set, indicates that the PHY is integrated into the same + physical package as the Ethernet MAC. If needed, muxers + should be configured to ensure the integrated PHY is + used. The absence of this property indicates the muxers + should be configured so that the external PHY is used. + + resets: + maxItems: 1 + + reset-names: + const: phy + + reset-gpios: + maxItems: 1 + description: + The GPIO phandle and specifier for the PHY reset signal. + + reset-assert-us: + description: + Delay after the reset was asserted in microseconds. If this + property is missing the delay will be skipped. + + reset-deassert-us: + description: + Delay after the reset was deasserted in microseconds. If + this property is missing the delay will be skipped. + +required: + - reg + +examples: + - | + ethernet { + #address-cells = <1>; + #size-cells = <0>; + + ethernet-phy@0 { + compatible = "ethernet-phy-id0141.0e90", "ethernet-phy-ieee802.3-c45"; + interrupt-parent = <&PIC>; + interrupts = <35 1>; + reg = <0>; + + resets = <&rst 8>; + reset-names = "phy"; + reset-gpios = <&gpio1 4 1>; + reset-assert-us = <1000>; + reset-deassert-us = <2000>; + }; + }; diff --git a/dts/Bindings/net/ethernet.txt b/dts/Bindings/net/ethernet.txt index e88c3641d6..5df413d01b 100644 --- a/dts/Bindings/net/ethernet.txt +++ b/dts/Bindings/net/ethernet.txt @@ -1,67 +1 @@ -The following properties are common to the Ethernet controllers: - -NOTE: All 'phy*' properties documented below are Ethernet specific. For the -generic PHY 'phys' property, see -Documentation/devicetree/bindings/phy/phy-bindings.txt. - -- mac-address: array of 6 bytes, specifies the MAC address that was last used by - the boot program; should be used in cases where the MAC address assigned to - the device by the boot program is different from the "local-mac-address" - property; -- local-mac-address: array of 6 bytes, specifies the MAC address that was - assigned to the network device; -- nvmem-cells: phandle, reference to an nvmem node for the MAC address -- nvmem-cell-names: string, should be "mac-address" if nvmem is to be used -- max-speed: number, specifies maximum speed in Mbit/s supported by the device; -- max-frame-size: number, maximum transfer unit (IEEE defined MTU), rather than - the maximum frame size (there's contradiction in the Devicetree - Specification). -- phy-mode: string, operation mode of the PHY interface. This is now a de-facto - standard property; supported values are: - * "internal" (Internal means there is not a standard bus between the MAC and - the PHY, something proprietary is being used to embed the PHY in the MAC.) - * "mii" - * "gmii" - * "sgmii" - * "qsgmii" - * "tbi" - * "rev-mii" - * "rmii" - * "rgmii" (RX and TX delays are added by the MAC when required) - * "rgmii-id" (RGMII with internal RX and TX delays provided by the PHY, the - MAC should not add the RX or TX delays in this case) - * "rgmii-rxid" (RGMII with internal RX delay provided by the PHY, the MAC - should not add an RX delay in this case) - * "rgmii-txid" (RGMII with internal TX delay provided by the PHY, the MAC - should not add an TX delay in this case) - * "rtbi" - * "smii" - * "xgmii" - * "trgmii" - * "1000base-x", - * "2500base-x", - * "rxaui" - * "xaui" - * "10gbase-kr" (10GBASE-KR, XFI, SFI) -- phy-connection-type: the same as "phy-mode" property but described in the - Devicetree Specification; -- phy-handle: phandle, specifies a reference to a node representing a PHY - device; this property is described in the Devicetree Specification and so - preferred; -- phy: the same as "phy-handle" property, not recommended for new bindings. -- phy-device: the same as "phy-handle" property, not recommended for new - bindings. -- rx-fifo-depth: the size of the controller's receive fifo in bytes. This - is used for components that can have configurable receive fifo sizes, - and is useful for determining certain configuration settings such as - flow control thresholds. -- tx-fifo-depth: the size of the controller's transmit fifo in bytes. This - is used for components that can have configurable fifo sizes. -- managed: string, specifies the PHY management type. Supported values are: - "auto", "in-band-status". "auto" is the default, it usess MDIO for - management if fixed-link is not specified. - -Child nodes of the Ethernet controller are typically the individual PHY devices -connected via the MDIO bus (sometimes the MDIO bus controller is separate). -They are described in the phy.txt file in this same directory. -For non-MDIO PHY management see fixed-link.txt. +This file has moved to ethernet-controller.yaml. diff --git a/dts/Bindings/net/fixed-link.txt b/dts/Bindings/net/fixed-link.txt index ec5d889fe3..5df413d01b 100644 --- a/dts/Bindings/net/fixed-link.txt +++ b/dts/Bindings/net/fixed-link.txt @@ -1,54 +1 @@ -Fixed link Device Tree binding ------------------------------- - -Some Ethernet MACs have a "fixed link", and are not connected to a -normal MDIO-managed PHY device. For those situations, a Device Tree -binding allows to describe a "fixed link". - -Such a fixed link situation is described by creating a 'fixed-link' -sub-node of the Ethernet MAC device node, with the following -properties: - -* 'speed' (integer, mandatory), to indicate the link speed. Accepted - values are 10, 100 and 1000 -* 'full-duplex' (boolean, optional), to indicate that full duplex is - used. When absent, half duplex is assumed. -* 'pause' (boolean, optional), to indicate that pause should be - enabled. -* 'asym-pause' (boolean, optional), to indicate that asym_pause should - be enabled. -* 'link-gpios' ('gpio-list', optional), to indicate if a gpio can be read - to determine if the link is up. - -Old, deprecated 'fixed-link' binding: - -* A 'fixed-link' property in the Ethernet MAC node, with 5 cells, of the - form <a b c d e> with the following accepted values: - - a: emulated PHY ID, choose any but but unique to the all specified - fixed-links, from 0 to 31 - - b: duplex configuration: 0 for half duplex, 1 for full duplex - - c: link speed in Mbits/sec, accepted values are: 10, 100 and 1000 - - d: pause configuration: 0 for no pause, 1 for pause - - e: asymmetric pause configuration: 0 for no asymmetric pause, 1 for - asymmetric pause - -Examples: - -ethernet@0 { - ... - fixed-link { - speed = <1000>; - full-duplex; - }; - ... -}; - -ethernet@1 { - ... - fixed-link { - speed = <1000>; - pause; - link-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; - }; - ... -}; +This file has moved to ethernet-controller.yaml. diff --git a/dts/Bindings/net/fsl-enetc.txt b/dts/Bindings/net/fsl-enetc.txt index c812e25ae9..25fc687419 100644 --- a/dts/Bindings/net/fsl-enetc.txt +++ b/dts/Bindings/net/fsl-enetc.txt @@ -16,8 +16,8 @@ Required properties: In this case, the ENETC node should include a "mdio" sub-node that in turn should contain the "ethernet-phy" node describing the external phy. Below properties are required, their bindings -already defined in ethernet.txt or phy.txt, under -Documentation/devicetree/bindings/net/*. +already defined in Documentation/devicetree/bindings/net/ethernet.txt or +Documentation/devicetree/bindings/net/phy.txt. Required: @@ -51,8 +51,7 @@ Example: connection: In this case, the ENETC port node defines a fixed link connection, -as specified by "fixed-link.txt", under -Documentation/devicetree/bindings/net/*. +as specified by Documentation/devicetree/bindings/net/fixed-link.txt. Required: diff --git a/dts/Bindings/net/hisilicon-hip04-net.txt b/dts/Bindings/net/hisilicon-hip04-net.txt index d1df8a00e1..464c0dafc6 100644 --- a/dts/Bindings/net/hisilicon-hip04-net.txt +++ b/dts/Bindings/net/hisilicon-hip04-net.txt @@ -10,6 +10,7 @@ Required properties: phandle, specifies a reference to the syscon ppe node port, port number connected to the controller channel, recv channel start from channel * number (RX_DESC_NUM) + group, field in the pkg desc, in general, it is the same as the port. - phy-mode: see ethernet.txt [1]. Optional properties: @@ -66,7 +67,7 @@ Example: reg = <0x28b0000 0x10000>; interrupts = <0 413 4>; phy-mode = "mii"; - port-handle = <&ppe 31 0>; + port-handle = <&ppe 31 0 31>; }; ge0: ethernet@2800000 { @@ -74,7 +75,7 @@ Example: reg = <0x2800000 0x10000>; interrupts = <0 402 4>; phy-mode = "sgmii"; - port-handle = <&ppe 0 1>; + port-handle = <&ppe 0 1 0>; phy-handle = <&phy0>; }; @@ -83,6 +84,6 @@ Example: reg = <0x2880000 0x10000>; interrupts = <0 410 4>; phy-mode = "sgmii"; - port-handle = <&ppe 8 2>; + port-handle = <&ppe 8 2 8>; phy-handle = <&phy1>; }; diff --git a/dts/Bindings/net/keystone-netcp.txt b/dts/Bindings/net/keystone-netcp.txt index 6262c2f293..24f11e042f 100644 --- a/dts/Bindings/net/keystone-netcp.txt +++ b/dts/Bindings/net/keystone-netcp.txt @@ -104,6 +104,23 @@ Required properties: - 10Gb mac<->mac forced mode : 11 ----phy-handle: phandle to PHY device +- cpts: sub-node time synchronization (CPTS) submodule configuration +-- clocks: CPTS reference clock. Should point on cpts-refclk-mux clock. +-- clock-names: should be "cpts" +-- cpts-refclk-mux: multiplexer clock definition sub-node for CPTS reference (RFTCLK) clock +--- #clock-cells: should be 0 +--- clocks: list of CPTS reference (RFTCLK) clock's parents as defined in Data manual +--- ti,mux-tbl: array of multiplexer indexes as defined in Data manual +--- assigned-clocks: should point on cpts-refclk-mux clock +--- assigned-clock-parents: should point on required RFTCLK clock parent to be selected +-- cpts_clock_mult: (optional) Numerator to convert input clock ticks + into nanoseconds +-- cpts_clock_shift: (optional) Denominator to convert input clock ticks into + nanoseconds. + Mult and shift will be calculated basing on CPTS + rftclk frequency if both cpts_clock_shift and + cpts_clock_mult properties are not provided. + Optional properties: - enable-ale: NetCP driver keeps the address learning feature in the ethernet switch module disabled. This attribute is to enable the address @@ -168,6 +185,23 @@ netcp: netcp@2000000 { tx-queue = <648>; tx-channel = <8>; + cpts { + clocks = <&cpts_refclk_mux>; + clock-names = "cpts"; + + cpts_refclk_mux: cpts-refclk-mux { + #clock-cells = <0>; + clocks = <&chipclk12>, <&chipclk13>, + <&timi0>, <&timi1>, + <&tsipclka>, <&tsrefclk>, + <&tsipclkb>; + ti,mux-tbl = <0x0>, <0x1>, <0x2>, + <0x3>, <0x4>, <0x8>, <0xC>; + assigned-clocks = <&cpts_refclk_mux>; + assigned-clock-parents = <&chipclk12>; + }; + }; + interfaces { gbe0: interface-0 { slave-port = <0>; @@ -219,3 +253,13 @@ netcp: netcp@2000000 { }; }; }; + +CPTS board configuration - select external CPTS RFTCLK: + +&tsrefclk{ + clock-frequency = <500000000>; +}; + +&cpts_refclk_mux { + assigned-clock-parents = <&tsrefclk>; +}; diff --git a/dts/Bindings/net/macb.txt b/dts/Bindings/net/macb.txt index 9c5e94482b..63c73fafe2 100644 --- a/dts/Bindings/net/macb.txt +++ b/dts/Bindings/net/macb.txt @@ -15,8 +15,11 @@ Required properties: Use "atmel,sama5d4-gem" for the GEM IP (10/100) available on Atmel sama5d4 SoCs. Use "cdns,zynq-gem" Xilinx Zynq-7xxx SoC. Use "cdns,zynqmp-gem" for Zynq Ultrascale+ MPSoC. + Use "sifive,fu540-macb" for SiFive FU540-C000 SoC. Or the generic form: "cdns,emac". - reg: Address and length of the register set for the device + For "sifive,fu540-macb", second range is required to specify the + address and length of the registers for GEMGXL Management block. - interrupts: Should contain macb interrupt - phy-mode: See ethernet.txt file in the same directory. - clock-names: Tuple listing input clock names. diff --git a/dts/Bindings/net/marvell-bluetooth.txt b/dts/Bindings/net/marvell-bluetooth.txt new file mode 100644 index 0000000000..0e28422960 --- /dev/null +++ b/dts/Bindings/net/marvell-bluetooth.txt @@ -0,0 +1,25 @@ +Marvell Bluetooth Chips +----------------------- + +This documents the binding structure and common properties for serial +attached Marvell Bluetooth devices. The following chips are included in +this binding: + +* Marvell 88W8897 Bluetooth devices + +Required properties: + - compatible: should be: + "mrvl,88w8897" + +Optional properties: +None so far + +Example: + +&serial0 { + compatible = "ns16550a"; + ... + bluetooth { + compatible = "mrvl,88w8897"; + }; +}; diff --git a/dts/Bindings/net/marvell-orion-mdio.txt b/dts/Bindings/net/marvell-orion-mdio.txt index 42cd81090a..3f3cfc1d8d 100644 --- a/dts/Bindings/net/marvell-orion-mdio.txt +++ b/dts/Bindings/net/marvell-orion-mdio.txt @@ -16,7 +16,7 @@ Required properties: Optional properties: - interrupts: interrupt line number for the SMI error/done interrupt -- clocks: phandle for up to three required clocks for the MDIO instance +- clocks: phandle for up to four required clocks for the MDIO instance The child nodes of the MDIO driver are the individual PHY devices connected to this MDIO bus. They must have a "reg" property given the diff --git a/dts/Bindings/net/mdio.txt b/dts/Bindings/net/mdio.txt index e3e1603f25..cf8a010548 100644 --- a/dts/Bindings/net/mdio.txt +++ b/dts/Bindings/net/mdio.txt @@ -1,37 +1 @@ -Common MDIO bus properties. - -These are generic properties that can apply to any MDIO bus. - -Optional properties: -- reset-gpios: One GPIO that control the RESET lines of all PHYs on that MDIO - bus. -- reset-delay-us: RESET pulse width in microseconds. - -A list of child nodes, one per device on the bus is expected. These -should follow the generic phy.txt, or a device specific binding document. - -The 'reset-delay-us' indicates the RESET signal pulse width in microseconds and -applies to all PHY devices. It must therefore be appropriately determined based -on all PHY requirements (maximum value of all per-PHY RESET pulse widths). - -Example : -This example shows these optional properties, plus other properties -required for the TI Davinci MDIO driver. - - davinci_mdio: ethernet@5c030000 { - compatible = "ti,davinci_mdio"; - reg = <0x5c030000 0x1000>; - #address-cells = <1>; - #size-cells = <0>; - - reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; - reset-delay-us = <2>; - - ethphy0: ethernet-phy@1 { - reg = <1>; - }; - - ethphy1: ethernet-phy@3 { - reg = <3>; - }; - }; +This file has moved to mdio.yaml. diff --git a/dts/Bindings/net/mdio.yaml b/dts/Bindings/net/mdio.yaml new file mode 100644 index 0000000000..5d08d2ffd4 --- /dev/null +++ b/dts/Bindings/net/mdio.yaml @@ -0,0 +1,74 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/mdio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MDIO Bus Generic Binding + +maintainers: + - Andrew Lunn <andrew@lunn.ch> + - Florian Fainelli <f.fainelli@gmail.com> + - Heiner Kallweit <hkallweit1@gmail.com> + +description: + These are generic properties that can apply to any MDIO bus. Any + MDIO bus must have a list of child nodes, one per device on the + bus. These should follow the generic ethernet-phy.yaml document, or + a device specific binding document. + +properties: + $nodename: + pattern: "^mdio(@.*)?" + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + reset-gpios: + maxItems: 1 + description: + The phandle and specifier for the GPIO that controls the RESET + lines of all PHYs on that MDIO bus. + + reset-delay-us: + description: + RESET pulse width in microseconds. It applies to all PHY devices + and must therefore be appropriately determined based on all PHY + requirements (maximum value of all per-PHY RESET pulse widths). + +patternProperties: + "^ethernet-phy@[0-9a-f]+$": + type: object + + properties: + reg: + minimum: 0 + maximum: 31 + description: + The ID number for the PHY. + + required: + - reg + +examples: + - | + davinci_mdio: mdio@5c030000 { + compatible = "ti,davinci_mdio"; + reg = <0x5c030000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + + reset-gpios = <&gpio2 5 1>; + reset-delay-us = <2>; + + ethphy0: ethernet-phy@1 { + reg = <1>; + }; + + ethphy1: ethernet-phy@3 { + reg = <3>; + }; + }; diff --git a/dts/Bindings/net/mediatek-bluetooth.txt b/dts/Bindings/net/mediatek-bluetooth.txt index 41a7dcc80f..112011c51d 100644 --- a/dts/Bindings/net/mediatek-bluetooth.txt +++ b/dts/Bindings/net/mediatek-bluetooth.txt @@ -50,16 +50,33 @@ Required properties: "mediatek,mt7663u-bluetooth": for MT7663U device "mediatek,mt7668u-bluetooth": for MT7668U device - vcc-supply: Main voltage regulator + +If the pin controller on the platform can support both pinmux and GPIO +control such as the most of MediaTek platform. Please use below properties. + - pinctrl-names: Should be "default", "runtime" - pinctrl-0: Should contain UART RXD low when the device is powered up to enter proper bootstrap mode. - pinctrl-1: Should contain UART mode pin ctrl +Else, the pin controller on the platform only can support pinmux control and +the GPIO control still has to rely on the dedicated GPIO controller such as +a legacy MediaTek SoC, MT7621. Please use the below properties. + +- boot-gpios: GPIO same to the pin as UART RXD and used to keep LOW when + the device is powered up to enter proper bootstrap mode when +- pinctrl-names: Should be "default" +- pinctrl-0: Should contain UART mode pin ctrl + Optional properties: - reset-gpios: GPIO used to reset the device whose initial state keeps low, if the GPIO is missing, then board-level design should be guaranteed. +- clocks: Should be the clock specifiers corresponding to the entry in + clock-names property. If the clock is missing, then board-level + design should be guaranteed. +- clock-names: Should contain "osc" entry for the external oscillator. - current-speed: Current baud rate of the device whose defaults to 921600 Example: diff --git a/dts/Bindings/net/mediatek-net.txt b/dts/Bindings/net/mediatek-net.txt index 503f2b9194..770ff98d45 100644 --- a/dts/Bindings/net/mediatek-net.txt +++ b/dts/Bindings/net/mediatek-net.txt @@ -11,6 +11,7 @@ Required properties: "mediatek,mt2701-eth": for MT2701 SoC "mediatek,mt7623-eth", "mediatek,mt2701-eth": for MT7623 SoC "mediatek,mt7622-eth": for MT7622 SoC + "mediatek,mt7629-eth": for MT7629 SoC - reg: Address and length of the register set for the device - interrupts: Should contain the three frame engines interrupts in numeric order. These are fe_int0, fe_int1 and fe_int2. @@ -19,14 +20,23 @@ Required properties: "ethif", "esw", "gp2", "gp1" : For MT2701 and MT7623 SoC "ethif", "esw", "gp0", "gp1", "gp2", "sgmii_tx250m", "sgmii_rx250m", "sgmii_cdr_ref", "sgmii_cdr_fb", "sgmii_ck", "eth2pll" : For MT7622 SoC + "ethif", "sgmiitop", "esw", "gp0", "gp1", "gp2", "fe", "sgmii_tx250m", + "sgmii_rx250m", "sgmii_cdr_ref", "sgmii_cdr_fb", "sgmii2_tx250m", + "sgmii2_rx250m", "sgmii2_cdr_ref", "sgmii2_cdr_fb", "sgmii_ck", + "eth2pll" : For MT7629 SoC. - power-domains: phandle to the power domain that the ethernet is part of - resets: Should contain phandles to the ethsys reset signals - reset-names: Should contain the names of reset signal listed in the resets property These are "fe", "gmac" and "ppe" - mediatek,ethsys: phandle to the syscon node that handles the port setup -- mediatek,sgmiisys: phandle to the syscon node that handles the SGMII setup - which is required for those SoCs equipped with SGMII such as MT7622 SoC. +- mediatek,infracfg: phandle to the syscon node that handles the path from + GMAC to PHY variants, which is required for MT7629 SoC. +- mediatek,sgmiisys: a list of phandles to the syscon node that handles the + SGMII setup which is required for those SoCs equipped with SGMII such + as MT7622 and MT7629 SoC. And MT7622 have only one set of SGMII shared + by GMAC1 and GMAC2; MT7629 have two independent sets of SGMII directed + to GMAC1 and GMAC2, respectively. - mediatek,pctl: phandle to the syscon node that handles the ports slew rate and driver current: only for MT2701 and MT7623 SoC diff --git a/dts/Bindings/net/phy.txt b/dts/Bindings/net/phy.txt index 9b9e5b1765..2399ee60ca 100644 --- a/dts/Bindings/net/phy.txt +++ b/dts/Bindings/net/phy.txt @@ -1,79 +1 @@ -PHY nodes - -Required properties: - - - interrupts : interrupt specifier for the sole interrupt. - - reg : The ID number for the phy, usually a small integer - -Optional Properties: - -- compatible: Compatible list, may contain - "ethernet-phy-ieee802.3-c22" or "ethernet-phy-ieee802.3-c45" for - PHYs that implement IEEE802.3 clause 22 or IEEE802.3 clause 45 - specifications. If neither of these are specified, the default is to - assume clause 22. - - If the PHY reports an incorrect ID (or none at all) then the - "compatible" list may contain an entry with the correct PHY ID in the - form: "ethernet-phy-idAAAA.BBBB" where - AAAA - The value of the 16 bit Phy Identifier 1 register as - 4 hex digits. This is the chip vendor OUI bits 3:18 - BBBB - The value of the 16 bit Phy Identifier 2 register as - 4 hex digits. This is the chip vendor OUI bits 19:24, - followed by 10 bits of a vendor specific ID. - - The compatible list should not contain other values than those - listed here. - -- max-speed: Maximum PHY supported speed (10, 100, 1000...) - -- broken-turn-around: If set, indicates the PHY device does not correctly - release the turn around line low at the end of a MDIO transaction. - -- enet-phy-lane-swap: If set, indicates the PHY will swap the TX/RX lanes to - compensate for the board being designed with the lanes swapped. - -- enet-phy-lane-no-swap: If set, indicates that PHY will disable swap of the - TX/RX lanes. This property allows the PHY to work correcly after e.g. wrong - bootstrap configuration caused by issues in PCB layout design. - -- eee-broken-100tx: -- eee-broken-1000t: -- eee-broken-10gt: -- eee-broken-1000kx: -- eee-broken-10gkx4: -- eee-broken-10gkr: - Mark the corresponding energy efficient ethernet mode as broken and - request the ethernet to stop advertising it. - -- phy-is-integrated: If set, indicates that the PHY is integrated into the same - physical package as the Ethernet MAC. If needed, muxers should be configured - to ensure the integrated PHY is used. The absence of this property indicates - the muxers should be configured so that the external PHY is used. - -- resets: The reset-controller phandle and specifier for the PHY reset signal. - -- reset-names: Must be "phy" for the PHY reset signal. - -- reset-gpios: The GPIO phandle and specifier for the PHY reset signal. - -- reset-assert-us: Delay after the reset was asserted in microseconds. - If this property is missing the delay will be skipped. - -- reset-deassert-us: Delay after the reset was deasserted in microseconds. - If this property is missing the delay will be skipped. - -Example: - -ethernet-phy@0 { - compatible = "ethernet-phy-id0141.0e90", "ethernet-phy-ieee802.3-c22"; - interrupt-parent = <&PIC>; - interrupts = <35 IRQ_TYPE_EDGE_RISING>; - reg = <0>; - - resets = <&rst 8>; - reset-names = "phy"; - reset-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; - reset-assert-us = <1000>; - reset-deassert-us = <2000>; -}; +This file has moved to ethernet-phy.yaml. diff --git a/dts/Bindings/net/qca,ar71xx.txt b/dts/Bindings/net/qca,ar71xx.txt new file mode 100644 index 0000000000..2a33e71ba7 --- /dev/null +++ b/dts/Bindings/net/qca,ar71xx.txt @@ -0,0 +1,45 @@ +Required properties: +- compatible: Should be "qca,<soc>-eth". Currently support compatibles are: + qca,ar7100-eth - Atheros AR7100 + qca,ar7240-eth - Atheros AR7240 + qca,ar7241-eth - Atheros AR7241 + qca,ar7242-eth - Atheros AR7242 + qca,ar9130-eth - Atheros AR9130 + qca,ar9330-eth - Atheros AR9330 + qca,ar9340-eth - Atheros AR9340 + qca,qca9530-eth - Qualcomm Atheros QCA9530 + qca,qca9550-eth - Qualcomm Atheros QCA9550 + qca,qca9560-eth - Qualcomm Atheros QCA9560 + +- reg : Address and length of the register set for the device +- interrupts : Should contain eth interrupt +- phy-mode : See ethernet.txt file in the same directory +- clocks: the clock used by the core +- clock-names: the names of the clock listed in the clocks property. These are + "eth" and "mdio". +- resets: Should contain phandles to the reset signals +- reset-names: Should contain the names of reset signal listed in the resets + property. These are "mac" and "mdio" + +Optional properties: +- phy-handle : phandle to the PHY device connected to this device. +- fixed-link : Assume a fixed link. See fixed-link.txt in the same directory. + Use instead of phy-handle. + +Optional subnodes: +- mdio : specifies the mdio bus, used as a container for phy nodes + according to phy.txt in the same directory + +Example: + +ethernet@1a000000 { + compatible = "qca,ar9330-eth"; + reg = <0x1a000000 0x200>; + interrupts = <5>; + resets = <&rst 13>, <&rst 23>; + reset-names = "mac", "mdio"; + clocks = <&pll ATH79_CLK_AHB>, <&pll ATH79_CLK_MDIO>; + clock-names = "eth", "mdio"; + + phy-mode = "gmii"; +}; diff --git a/dts/Bindings/net/qualcomm-bluetooth.txt b/dts/Bindings/net/qualcomm-bluetooth.txt index 7ef6118abd..68b67d9db6 100644 --- a/dts/Bindings/net/qualcomm-bluetooth.txt +++ b/dts/Bindings/net/qualcomm-bluetooth.txt @@ -17,6 +17,7 @@ Optional properties for compatible string qcom,qca6174-bt: - enable-gpios: gpio specifier used to enable chip - clocks: clock provided to the controller (SUSCLK_32KHZ) + - firmware-name: specify the name of nvm firmware to load Required properties for compatible string qcom,wcn399x-bt: @@ -28,6 +29,7 @@ Required properties for compatible string qcom,wcn399x-bt: Optional properties for compatible string qcom,wcn399x-bt: - max-speed: see Documentation/devicetree/bindings/serial/slave-device.txt + - firmware-name: specify the name of nvm firmware to load Examples: @@ -40,6 +42,7 @@ serial@7570000 { enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>; clocks = <&divclk4>; + firmware-name = "nvm_00440302.bin"; }; }; @@ -52,5 +55,6 @@ serial@898000 { vddrf-supply = <&vreg_l17a_1p3>; vddch0-supply = <&vreg_l25a_3p3>; max-speed = <3200000>; + firmware-name = "crnv21.bin"; }; }; diff --git a/dts/Bindings/net/snps,dwmac.yaml b/dts/Bindings/net/snps,dwmac.yaml new file mode 100644 index 0000000000..76fea2be66 --- /dev/null +++ b/dts/Bindings/net/snps,dwmac.yaml @@ -0,0 +1,411 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/snps,dwmac.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Synopsys DesignWare MAC Device Tree Bindings + +maintainers: + - Alexandre Torgue <alexandre.torgue@st.com> + - Giuseppe Cavallaro <peppe.cavallaro@st.com> + - Jose Abreu <joabreu@synopsys.com> + +# Select every compatible, including the deprecated ones. This way, we +# will be able to report a warning when we have that compatible, since +# we will validate the node thanks to the select, but won't report it +# as a valid value in the compatible property description +select: + properties: + compatible: + contains: + enum: + - snps,dwmac + - snps,dwmac-3.50a + - snps,dwmac-3.610 + - snps,dwmac-3.70a + - snps,dwmac-3.710 + - snps,dwmac-4.00 + - snps,dwmac-4.10a + - snps,dwxgmac + - snps,dwxgmac-2.10 + + # Deprecated + - st,spear600-gmac + + required: + - compatible + +properties: + + # We need to include all the compatibles from schemas that will + # include that schemas, otherwise compatible won't validate for + # those. + compatible: + contains: + enum: + - allwinner,sun7i-a20-gmac + - allwinner,sun8i-a83t-emac + - allwinner,sun8i-h3-emac + - allwinner,sun8i-r40-emac + - allwinner,sun8i-v3s-emac + - allwinner,sun50i-a64-emac + - snps,dwmac + - snps,dwmac-3.50a + - snps,dwmac-3.610 + - snps,dwmac-3.70a + - snps,dwmac-3.710 + - snps,dwmac-4.00 + - snps,dwmac-4.10a + - snps,dwxgmac + - snps,dwxgmac-2.10 + + reg: + maxItems: 1 + + interrupts: + minItems: 1 + maxItems: 3 + items: + - description: Combined signal for various interrupt events + - description: The interrupt to manage the remote wake-up packet detection + - description: The interrupt that occurs when Rx exits the LPI state + + interrupt-names: + minItems: 1 + maxItems: 3 + items: + - const: macirq + - const: eth_wake_irq + - const: eth_lpi + + clocks: + minItems: 1 + maxItems: 3 + items: + - description: GMAC main clock + - description: Peripheral registers interface clock + - description: + PTP reference clock. This clock is used for programming the + Timestamp Addend Register. If not passed then the system + clock will be used and this is fine on some platforms. + + clock-names: + additionalItems: true + contains: + enum: + - stmmaceth + - pclk + - ptp_ref + + resets: + maxItems: 1 + description: + MAC Reset signal. + + reset-names: + const: stmmaceth + + snps,axi-config: + $ref: /schemas/types.yaml#definitions/phandle + description: + AXI BUS Mode parameters. Phandle to a node that can contain the + following properties + * snps,lpi_en, enable Low Power Interface + * snps,xit_frm, unlock on WoL + * snps,wr_osr_lmt, max write outstanding req. limit + * snps,rd_osr_lmt, max read outstanding req. limit + * snps,kbbe, do not cross 1KiB boundary. + * snps,blen, this is a vector of supported burst length. + * snps,fb, fixed-burst + * snps,mb, mixed-burst + * snps,rb, rebuild INCRx Burst + + snps,mtl-rx-config: + $ref: /schemas/types.yaml#definitions/phandle + description: + Multiple RX Queues parameters. Phandle to a node that can + contain the following properties + * snps,rx-queues-to-use, number of RX queues to be used in the + driver + * Choose one of these RX scheduling algorithms + * snps,rx-sched-sp, Strict priority + * snps,rx-sched-wsp, Weighted Strict priority + * For each RX queue + * Choose one of these modes + * snps,dcb-algorithm, Queue to be enabled as DCB + * snps,avb-algorithm, Queue to be enabled as AVB + * snps,map-to-dma-channel, Channel to map + * Specifiy specific packet routing + * snps,route-avcp, AV Untagged Control packets + * snps,route-ptp, PTP Packets + * snps,route-dcbcp, DCB Control Packets + * snps,route-up, Untagged Packets + * snps,route-multi-broad, Multicast & Broadcast Packets + * snps,priority, RX queue priority (Range 0x0 to 0xF) + + snps,mtl-tx-config: + $ref: /schemas/types.yaml#definitions/phandle + description: + Multiple TX Queues parameters. Phandle to a node that can + contain the following properties + * snps,tx-queues-to-use, number of TX queues to be used in the + driver + * Choose one of these TX scheduling algorithms + * snps,tx-sched-wrr, Weighted Round Robin + * snps,tx-sched-wfq, Weighted Fair Queuing + * snps,tx-sched-dwrr, Deficit Weighted Round Robin + * snps,tx-sched-sp, Strict priority + * For each TX queue + * snps,weight, TX queue weight (if using a DCB weight + algorithm) + * Choose one of these modes + * snps,dcb-algorithm, TX queue will be working in DCB + * snps,avb-algorithm, TX queue will be working in AVB + [Attention] Queue 0 is reserved for legacy traffic + and so no AVB is available in this queue. + * Configure Credit Base Shaper (if AVB Mode selected) + * snps,send_slope, enable Low Power Interface + * snps,idle_slope, unlock on WoL + * snps,high_credit, max write outstanding req. limit + * snps,low_credit, max read outstanding req. limit + * snps,priority, TX queue priority (Range 0x0 to 0xF) + + snps,reset-gpio: + deprecated: true + maxItems: 1 + description: + PHY Reset GPIO + + snps,reset-active-low: + deprecated: true + $ref: /schemas/types.yaml#definitions/flag + description: + Indicates that the PHY Reset is active low + + snps,reset-delays-us: + deprecated: true + allOf: + - $ref: /schemas/types.yaml#definitions/uint32-array + - minItems: 3 + maxItems: 3 + description: + Triplet of delays. The 1st cell is reset pre-delay in micro + seconds. The 2nd cell is reset pulse in micro seconds. The 3rd + cell is reset post-delay in micro seconds. + + snps,aal: + $ref: /schemas/types.yaml#definitions/flag + description: + Use Address-Aligned Beats + + snps,fixed-burst: + $ref: /schemas/types.yaml#definitions/flag + description: + Program the DMA to use the fixed burst mode + + snps,mixed-burst: + $ref: /schemas/types.yaml#definitions/flag + description: + Program the DMA to use the mixed burst mode + + snps,force_thresh_dma_mode: + $ref: /schemas/types.yaml#definitions/flag + description: + Force DMA to use the threshold mode for both tx and rx + + snps,force_sf_dma_mode: + $ref: /schemas/types.yaml#definitions/flag + description: + Force DMA to use the Store and Forward mode for both tx and + rx. This flag is ignored if force_thresh_dma_mode is set. + + snps,en-tx-lpi-clockgating: + $ref: /schemas/types.yaml#definitions/flag + description: + Enable gating of the MAC TX clock during TX low-power mode + + snps,multicast-filter-bins: + $ref: /schemas/types.yaml#definitions/uint32 + description: + Number of multicast filter hash bins supported by this device + instance + + snps,perfect-filter-entries: + $ref: /schemas/types.yaml#definitions/uint32 + description: + Number of perfect filter entries supported by this device + instance + + snps,ps-speed: + $ref: /schemas/types.yaml#definitions/uint32 + description: + Port selection speed that can be passed to the core when PCS + is supported. For example, this is used in case of SGMII and + MAC2MAC connection. + + mdio: + type: object + description: + Creates and registers an MDIO bus. + + properties: + compatible: + const: snps,dwmac-mdio + + required: + - compatible + +required: + - compatible + - reg + - interrupts + - interrupt-names + - phy-mode + +dependencies: + snps,reset-active-low: ["snps,reset-gpio"] + snps,reset-delay-us: ["snps,reset-gpio"] + +allOf: + - $ref: "ethernet-controller.yaml#" + - if: + properties: + compatible: + contains: + enum: + - allwinner,sun7i-a20-gmac + - allwinner,sun8i-a83t-emac + - allwinner,sun8i-h3-emac + - allwinner,sun8i-r40-emac + - allwinner,sun8i-v3s-emac + - allwinner,sun50i-a64-emac + - snps,dwxgmac + - snps,dwxgmac-2.10 + - st,spear600-gmac + + then: + properties: + snps,pbl: + allOf: + - $ref: /schemas/types.yaml#definitions/uint32 + - enum: [2, 4, 8] + description: + Programmable Burst Length (tx and rx) + + snps,txpbl: + allOf: + - $ref: /schemas/types.yaml#definitions/uint32 + - enum: [2, 4, 8] + description: + Tx Programmable Burst Length. If set, DMA tx will use this + value rather than snps,pbl. + + snps,rxpbl: + allOf: + - $ref: /schemas/types.yaml#definitions/uint32 + - enum: [2, 4, 8] + description: + Rx Programmable Burst Length. If set, DMA rx will use this + value rather than snps,pbl. + + snps,no-pbl-x8: + $ref: /schemas/types.yaml#definitions/flag + description: + Don\'t multiply the pbl/txpbl/rxpbl values by 8. For core + rev < 3.50, don\'t multiply the values by 4. + + - if: + properties: + compatible: + contains: + enum: + - allwinner,sun7i-a20-gmac + - allwinner,sun8i-a83t-emac + - allwinner,sun8i-h3-emac + - allwinner,sun8i-r40-emac + - allwinner,sun8i-v3s-emac + - allwinner,sun50i-a64-emac + - snps,dwmac-4.00 + - snps,dwmac-4.10a + - snps,dwxgmac + - snps,dwxgmac-2.10 + - st,spear600-gmac + + then: + snps,tso: + $ref: /schemas/types.yaml#definitions/flag + description: + Enables the TSO feature otherwise it will be managed by + MAC HW capability register. + +examples: + - | + stmmac_axi_setup: stmmac-axi-config { + snps,wr_osr_lmt = <0xf>; + snps,rd_osr_lmt = <0xf>; + snps,blen = <256 128 64 32 0 0 0>; + }; + + mtl_rx_setup: rx-queues-config { + snps,rx-queues-to-use = <1>; + snps,rx-sched-sp; + queue0 { + snps,dcb-algorithm; + snps,map-to-dma-channel = <0x0>; + snps,priority = <0x0>; + }; + }; + + mtl_tx_setup: tx-queues-config { + snps,tx-queues-to-use = <2>; + snps,tx-sched-wrr; + queue0 { + snps,weight = <0x10>; + snps,dcb-algorithm; + snps,priority = <0x0>; + }; + + queue1 { + snps,avb-algorithm; + snps,send_slope = <0x1000>; + snps,idle_slope = <0x1000>; + snps,high_credit = <0x3E800>; + snps,low_credit = <0xFFC18000>; + snps,priority = <0x1>; + }; + }; + + gmac0: ethernet@e0800000 { + compatible = "snps,dwxgmac-2.10", "snps,dwxgmac"; + reg = <0xe0800000 0x8000>; + interrupt-parent = <&vic1>; + interrupts = <24 23 22>; + interrupt-names = "macirq", "eth_wake_irq", "eth_lpi"; + mac-address = [000000000000]; /* Filled in by U-Boot */ + max-frame-size = <3800>; + phy-mode = "gmii"; + snps,multicast-filter-bins = <256>; + snps,perfect-filter-entries = <128>; + rx-fifo-depth = <16384>; + tx-fifo-depth = <16384>; + clocks = <&clock>; + clock-names = "stmmaceth"; + snps,axi-config = <&stmmac_axi_setup>; + snps,mtl-rx-config = <&mtl_rx_setup>; + snps,mtl-tx-config = <&mtl_tx_setup>; + mdio0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + phy1: ethernet-phy@0 { + reg = <0>; + }; + }; + }; + +# FIXME: We should set it, but it would report all the generic +# properties as additional properties. +# additionalProperties: false + +... diff --git a/dts/Bindings/net/socfpga-dwmac.txt b/dts/Bindings/net/socfpga-dwmac.txt index 17d6819669..612a8e8abc 100644 --- a/dts/Bindings/net/socfpga-dwmac.txt +++ b/dts/Bindings/net/socfpga-dwmac.txt @@ -6,11 +6,17 @@ present in Documentation/devicetree/bindings/net/stmmac.txt. The device node has additional properties: Required properties: - - compatible : Should contain "altr,socfpga-stmmac" along with - "snps,dwmac" and any applicable more detailed + - compatible : For Cyclone5/Arria5 SoCs it should contain + "altr,socfpga-stmmac". For Arria10/Agilex/Stratix10 SoCs + "altr,socfpga-stmmac-a10-s10". + Along with "snps,dwmac" and any applicable more detailed designware version numbers documented in stmmac.txt - altr,sysmgr-syscon : Should be the phandle to the system manager node that encompasses the glue register, the register offset, and the register shift. + On Cyclone5/Arria5, the register shift represents the PHY mode bits, while + on the Arria10/Stratix10/Agilex platforms, the register shift represents + bit for each emac to enable/disable signals from the FPGA fabric to the + EMAC modules. - altr,f2h_ptp_ref_clk use f2h_ptp_ref_clk instead of default eosc1 clock for ptp ref clk. This affects all emacs as the clock is common. diff --git a/dts/Bindings/net/stmmac.txt b/dts/Bindings/net/stmmac.txt index cb694062af..7d48782767 100644 --- a/dts/Bindings/net/stmmac.txt +++ b/dts/Bindings/net/stmmac.txt @@ -1,178 +1 @@ -* STMicroelectronics 10/100/1000/2500/10000 Ethernet (GMAC/XGMAC) - -Required properties: -- compatible: Should be "snps,dwmac-<ip_version>", "snps,dwmac" or - "snps,dwxgmac-<ip_version>", "snps,dwxgmac". - For backwards compatibility: "st,spear600-gmac" is also supported. -- reg: Address and length of the register set for the device -- interrupts: Should contain the STMMAC interrupts -- interrupt-names: Should contain a list of interrupt names corresponding to - the interrupts in the interrupts property, if available. - Valid interrupt names are: - - "macirq" (combined signal for various interrupt events) - - "eth_wake_irq" (the interrupt to manage the remote wake-up packet detection) - - "eth_lpi" (the interrupt that occurs when Rx exits the LPI state) -- phy-mode: See ethernet.txt file in the same directory. -- snps,reset-gpio gpio number for phy reset. -- snps,reset-active-low boolean flag to indicate if phy reset is active low. -- snps,reset-delays-us is triplet of delays - The 1st cell is reset pre-delay in micro seconds. - The 2nd cell is reset pulse in micro seconds. - The 3rd cell is reset post-delay in micro seconds. - -Optional properties: -- resets: Should contain a phandle to the STMMAC reset signal, if any -- reset-names: Should contain the reset signal name "stmmaceth", if a - reset phandle is given -- max-frame-size: See ethernet.txt file in the same directory -- clocks: If present, the first clock should be the GMAC main clock and - the second clock should be peripheral's register interface clock. Further - clocks may be specified in derived bindings. -- clock-names: One name for each entry in the clocks property, the - first one should be "stmmaceth" and the second one should be "pclk". -- ptp_ref: this is the PTP reference clock; in case of the PTP is available - this clock is used for programming the Timestamp Addend Register. If not - passed then the system clock will be used and this is fine on some - platforms. -- tx-fifo-depth: See ethernet.txt file in the same directory -- rx-fifo-depth: See ethernet.txt file in the same directory -- snps,pbl Programmable Burst Length (tx and rx) -- snps,txpbl Tx Programmable Burst Length. Only for GMAC and newer. - If set, DMA tx will use this value rather than snps,pbl. -- snps,rxpbl Rx Programmable Burst Length. Only for GMAC and newer. - If set, DMA rx will use this value rather than snps,pbl. -- snps,no-pbl-x8 Don't multiply the pbl/txpbl/rxpbl values by 8. - For core rev < 3.50, don't multiply the values by 4. -- snps,aal Address-Aligned Beats -- snps,fixed-burst Program the DMA to use the fixed burst mode -- snps,mixed-burst Program the DMA to use the mixed burst mode -- snps,force_thresh_dma_mode Force DMA to use the threshold mode for - both tx and rx -- snps,force_sf_dma_mode Force DMA to use the Store and Forward - mode for both tx and rx. This flag is - ignored if force_thresh_dma_mode is set. -- snps,en-tx-lpi-clockgating Enable gating of the MAC TX clock during - TX low-power mode -- snps,multicast-filter-bins: Number of multicast filter hash bins - supported by this device instance -- snps,perfect-filter-entries: Number of perfect filter entries supported - by this device instance -- snps,ps-speed: port selection speed that can be passed to the core when - PCS is supported. For example, this is used in case of SGMII - and MAC2MAC connection. -- snps,tso: this enables the TSO feature otherwise it will be managed by - MAC HW capability register. Only for GMAC4 and newer. -- AXI BUS Mode parameters: below the list of all the parameters to program the - AXI register inside the DMA module: - - snps,lpi_en: enable Low Power Interface - - snps,xit_frm: unlock on WoL - - snps,wr_osr_lmt: max write outstanding req. limit - - snps,rd_osr_lmt: max read outstanding req. limit - - snps,kbbe: do not cross 1KiB boundary. - - snps,blen: this is a vector of supported burst length. - - snps,fb: fixed-burst - - snps,mb: mixed-burst - - snps,rb: rebuild INCRx Burst -- mdio: with compatible = "snps,dwmac-mdio", create and register mdio bus. -- Multiple RX Queues parameters: below the list of all the parameters to - configure the multiple RX queues: - - snps,rx-queues-to-use: number of RX queues to be used in the driver - - Choose one of these RX scheduling algorithms: - - snps,rx-sched-sp: Strict priority - - snps,rx-sched-wsp: Weighted Strict priority - - For each RX queue - - Choose one of these modes: - - snps,dcb-algorithm: Queue to be enabled as DCB - - snps,avb-algorithm: Queue to be enabled as AVB - - snps,map-to-dma-channel: Channel to map - - Specifiy specific packet routing: - - snps,route-avcp: AV Untagged Control packets - - snps,route-ptp: PTP Packets - - snps,route-dcbcp: DCB Control Packets - - snps,route-up: Untagged Packets - - snps,route-multi-broad: Multicast & Broadcast Packets - - snps,priority: RX queue priority (Range: 0x0 to 0xF) -- Multiple TX Queues parameters: below the list of all the parameters to - configure the multiple TX queues: - - snps,tx-queues-to-use: number of TX queues to be used in the driver - - Choose one of these TX scheduling algorithms: - - snps,tx-sched-wrr: Weighted Round Robin - - snps,tx-sched-wfq: Weighted Fair Queuing - - snps,tx-sched-dwrr: Deficit Weighted Round Robin - - snps,tx-sched-sp: Strict priority - - For each TX queue - - snps,weight: TX queue weight (if using a DCB weight algorithm) - - Choose one of these modes: - - snps,dcb-algorithm: TX queue will be working in DCB - - snps,avb-algorithm: TX queue will be working in AVB - [Attention] Queue 0 is reserved for legacy traffic - and so no AVB is available in this queue. - - Configure Credit Base Shaper (if AVB Mode selected): - - snps,send_slope: enable Low Power Interface - - snps,idle_slope: unlock on WoL - - snps,high_credit: max write outstanding req. limit - - snps,low_credit: max read outstanding req. limit - - snps,priority: TX queue priority (Range: 0x0 to 0xF) -Examples: - - stmmac_axi_setup: stmmac-axi-config { - snps,wr_osr_lmt = <0xf>; - snps,rd_osr_lmt = <0xf>; - snps,blen = <256 128 64 32 0 0 0>; - }; - - mtl_rx_setup: rx-queues-config { - snps,rx-queues-to-use = <1>; - snps,rx-sched-sp; - queue0 { - snps,dcb-algorithm; - snps,map-to-dma-channel = <0x0>; - snps,priority = <0x0>; - }; - }; - - mtl_tx_setup: tx-queues-config { - snps,tx-queues-to-use = <2>; - snps,tx-sched-wrr; - queue0 { - snps,weight = <0x10>; - snps,dcb-algorithm; - snps,priority = <0x0>; - }; - - queue1 { - snps,avb-algorithm; - snps,send_slope = <0x1000>; - snps,idle_slope = <0x1000>; - snps,high_credit = <0x3E800>; - snps,low_credit = <0xFFC18000>; - snps,priority = <0x1>; - }; - }; - - gmac0: ethernet@e0800000 { - compatible = "st,spear600-gmac"; - reg = <0xe0800000 0x8000>; - interrupt-parent = <&vic1>; - interrupts = <24 23 22>; - interrupt-names = "macirq", "eth_wake_irq", "eth_lpi"; - mac-address = [000000000000]; /* Filled in by U-Boot */ - max-frame-size = <3800>; - phy-mode = "gmii"; - snps,multicast-filter-bins = <256>; - snps,perfect-filter-entries = <128>; - rx-fifo-depth = <16384>; - tx-fifo-depth = <16384>; - clocks = <&clock>; - clock-names = "stmmaceth"; - snps,axi-config = <&stmmac_axi_setup>; - mdio0 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "snps,dwmac-mdio"; - phy1: ethernet-phy@0 { - }; - }; - snps,mtl-rx-config = <&mtl_rx_setup>; - snps,mtl-tx-config = <&mtl_tx_setup>; - }; +This file has moved to snps,dwmac.yaml. diff --git a/dts/Bindings/net/ti,dp83867.txt b/dts/Bindings/net/ti,dp83867.txt index 9ef9338aae..db6aa3f221 100644 --- a/dts/Bindings/net/ti,dp83867.txt +++ b/dts/Bindings/net/ti,dp83867.txt @@ -11,6 +11,14 @@ Required properties: - ti,fifo-depth - Transmitt FIFO depth- see dt-bindings/net/ti-dp83867.h for applicable values +Note: If the interface type is PHY_INTERFACE_MODE_RGMII the TX/RX clock delays + will be left at their default values, as set by the PHY's pin strapping. + The default strapping will use a delay of 2.00 ns. Thus + PHY_INTERFACE_MODE_RGMII, by default, does not behave as RGMII with no + internal delay, but as PHY_INTERFACE_MODE_RGMII_ID. The device tree + should use "rgmii-id" if internal delays are desired as this may be + changed in future to cause "rgmii" mode to disable delays. + Optional property: - ti,min-output-impedance - MAC Interface Impedance control to set the programmable output impedance to @@ -25,8 +33,10 @@ Optional property: software needs to take when this pin is strapped in these modes. See data manual for details. - - ti,clk-output-sel - Muxing option for CLK_OUT pin - see dt-bindings/net/ti-dp83867.h - for applicable values. + - ti,clk-output-sel - Muxing option for CLK_OUT pin. See dt-bindings/net/ti-dp83867.h + for applicable values. The CLK_OUT pin can also + be disabled by this property. When omitted, the + PHY's default will be left as is. Note: ti,min-output-impedance and ti,max-output-impedance are mutually exclusive. When both properties are present ti,max-output-impedance diff --git a/dts/Bindings/net/wiznet,w5x00.txt b/dts/Bindings/net/wiznet,w5x00.txt new file mode 100644 index 0000000000..e9665798c4 --- /dev/null +++ b/dts/Bindings/net/wiznet,w5x00.txt @@ -0,0 +1,50 @@ +* Wiznet w5x00 + +This is a standalone 10/100 MBit Ethernet controller with SPI interface. + +For each device connected to a SPI bus, define a child node within +the SPI master node. + +Required properties: +- compatible: Should be one of the following strings: + "wiznet,w5100" + "wiznet,w5200" + "wiznet,w5500" +- reg: Specify the SPI chip select the chip is wired to. +- interrupts: Specify the interrupt index within the interrupt controller (referred + to above in interrupt-parent) and interrupt type. w5x00 natively + generates falling edge interrupts, however, additional board logic + might invert the signal. +- pinctrl-names: List of assigned state names, see pinctrl binding documentation. +- pinctrl-0: List of phandles to configure the GPIO pin used as interrupt line, + see also generic and your platform specific pinctrl binding + documentation. + +Optional properties: +- spi-max-frequency: Maximum frequency of the SPI bus when accessing the w5500. + According to the w5500 datasheet, the chip allows a maximum of 80 MHz, however, + board designs may need to limit this value. +- local-mac-address: See ethernet.txt in the same directory. + + +Example (for Raspberry Pi with pin control stuff for GPIO irq): + +&spi { + ethernet@0: w5500@0 { + compatible = "wiznet,w5500"; + reg = <0>; + pinctrl-names = "default"; + pinctrl-0 = <ð1_pins>; + interrupt-parent = <&gpio>; + interrupts = <25 IRQ_TYPE_EDGE_FALLING>; + spi-max-frequency = <30000000>; + }; +}; + +&gpio { + eth1_pins: eth1_pins { + brcm,pins = <25>; + brcm,function = <0>; /* in */ + brcm,pull = <0>; /* none */ + }; +}; diff --git a/dts/Bindings/net/xilinx_axienet.txt b/dts/Bindings/net/xilinx_axienet.txt index 38f9ec0767..7360617cde 100644 --- a/dts/Bindings/net/xilinx_axienet.txt +++ b/dts/Bindings/net/xilinx_axienet.txt @@ -17,8 +17,15 @@ For more details about mdio please refer phy.txt file in the same directory. Required properties: - compatible : Must be one of "xlnx,axi-ethernet-1.00.a", "xlnx,axi-ethernet-1.01.a", "xlnx,axi-ethernet-2.01.a" -- reg : Address and length of the IO space. -- interrupts : Should be a list of two interrupt, TX and RX. +- reg : Address and length of the IO space, as well as the address + and length of the AXI DMA controller IO space, unless + axistream-connected is specified, in which case the reg + attribute of the node referenced by it is used. +- interrupts : Should be a list of 2 or 3 interrupts: TX DMA, RX DMA, + and optionally Ethernet core. If axistream-connected is + specified, the TX/RX DMA interrupts should be on that node + instead, and only the Ethernet core interrupt is optionally + specified here. - phy-handle : Should point to the external phy device. See ethernet.txt file in the same directory. - xlnx,rxmem : Set to allocated memory buffer for Rx/Tx in the hardware @@ -31,15 +38,29 @@ Optional properties: 1 to enable partial TX checksum offload, 2 to enable full TX checksum offload - xlnx,rxcsum : Same values as xlnx,txcsum but for RX checksum offload +- clocks : AXI bus clock for the device. Refer to common clock bindings. + Used to calculate MDIO clock divisor. If not specified, it is + auto-detected from the CPU clock (but only on platforms where + this is possible). New device trees should specify this - the + auto detection is only for backward compatibility. +- axistream-connected: Reference to another node which contains the resources + for the AXI DMA controller used by this device. + If this is specified, the DMA-related resources from that + device (DMA registers and DMA TX/RX interrupts) rather + than this one will be used. + - mdio : Child node for MDIO bus. Must be defined if PHY access is + required through the core's MDIO interface (i.e. always, + unless the PHY is accessed through a different bus). Example: axi_ethernet_eth: ethernet@40c00000 { compatible = "xlnx,axi-ethernet-1.00.a"; device_type = "network"; interrupt-parent = <µblaze_0_axi_intc>; - interrupts = <2 0>; + interrupts = <2 0 1>; + clocks = <&axi_clk>; phy-mode = "mii"; - reg = <0x40c00000 0x40000>; + reg = <0x40c00000 0x40000 0x50c00000 0x40000>; xlnx,rxcsum = <0x2>; xlnx,rxmem = <0x800>; xlnx,txcsum = <0x2>; diff --git a/dts/Bindings/nvmem/allwinner,sun4i-a10-sid.yaml b/dts/Bindings/nvmem/allwinner,sun4i-a10-sid.yaml new file mode 100644 index 0000000000..1084e9d291 --- /dev/null +++ b/dts/Bindings/nvmem/allwinner,sun4i-a10-sid.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/nvmem/allwinner,sun4i-a10-sid.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A10 Security ID Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <maxime.ripard@bootlin.com> + +allOf: + - $ref: "nvmem.yaml#" + +properties: + compatible: + enum: + - allwinner,sun4i-a10-sid + - allwinner,sun7i-a20-sid + - allwinner,sun8i-a83t-sid + - allwinner,sun8i-h3-sid + - allwinner,sun50i-a64-sid + - allwinner,sun50i-h5-sid + - allwinner,sun50i-h6-sid + + reg: + maxItems: 1 + +required: + - compatible + - reg + +# FIXME: We should set it, but it would report all the generic +# properties as additional properties. +# additionalProperties: false + +examples: + - | + efuse@1c23800 { + compatible = "allwinner,sun4i-a10-sid"; + reg = <0x01c23800 0x10>; + }; + + - | + efuse@1c23800 { + compatible = "allwinner,sun7i-a20-sid"; + reg = <0x01c23800 0x200>; + }; + +... diff --git a/dts/Bindings/nvmem/allwinner,sunxi-sid.txt b/dts/Bindings/nvmem/allwinner,sunxi-sid.txt deleted file mode 100644 index cfb18b4ef8..0000000000 --- a/dts/Bindings/nvmem/allwinner,sunxi-sid.txt +++ /dev/null @@ -1,29 +0,0 @@ -Allwinner sunxi-sid - -Required properties: -- compatible: Should be one of the following: - "allwinner,sun4i-a10-sid" - "allwinner,sun7i-a20-sid" - "allwinner,sun8i-a83t-sid" - "allwinner,sun8i-h3-sid" - "allwinner,sun50i-a64-sid" - "allwinner,sun50i-h5-sid" - "allwinner,sun50i-h6-sid" - -- reg: Should contain registers location and length - -= Data cells = -Are child nodes of sunxi-sid, bindings of which as described in -bindings/nvmem/nvmem.txt - -Example for sun4i: - sid@1c23800 { - compatible = "allwinner,sun4i-a10-sid"; - reg = <0x01c23800 0x10> - }; - -Example for sun7i: - sid@1c23800 { - compatible = "allwinner,sun7i-a20-sid"; - reg = <0x01c23800 0x200> - }; diff --git a/dts/Bindings/nvmem/imx-ocotp.txt b/dts/Bindings/nvmem/imx-ocotp.txt index 68f7d6fdd1..96ffd06d2c 100644 --- a/dts/Bindings/nvmem/imx-ocotp.txt +++ b/dts/Bindings/nvmem/imx-ocotp.txt @@ -15,6 +15,7 @@ Required properties: "fsl,imx6sll-ocotp" (i.MX6SLL), "fsl,imx7ulp-ocotp" (i.MX7ULP), "fsl,imx8mq-ocotp" (i.MX8MQ), + "fsl,imx8mm-ocotp" (i.MX8MM), followed by "syscon". - #address-cells : Should be 1 - #size-cells : Should be 1 diff --git a/dts/Bindings/nvmem/nvmem-consumer.yaml b/dts/Bindings/nvmem/nvmem-consumer.yaml new file mode 100644 index 0000000000..b7c00ed310 --- /dev/null +++ b/dts/Bindings/nvmem/nvmem-consumer.yaml @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/nvmem/nvmem-consumer.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVMEM (Non Volatile Memory) Consumer Device Tree Bindings + +maintainers: + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> + +select: true + +properties: + nvmem: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: + List of phandle to the nvmem providers. + + nvmem-cells: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: + List of phandle to the nvmem data cells. + + nvmem-names: + $ref: /schemas/types.yaml#/definitions/string-array + description: + Names for the each nvmem provider. + + nvmem-cell-names: + $ref: /schemas/types.yaml#/definitions/string-array + description: + Names for each nvmem-cells specified. + +dependencies: + nvmem-names: [ nvmem ] + nvmem-cell-names: [ nvmem-cells ] + +examples: + - | + tsens { + /* ... */ + nvmem-cells = <&tsens_calibration>; + nvmem-cell-names = "calibration"; + }; diff --git a/dts/Bindings/nvmem/nvmem.txt b/dts/Bindings/nvmem/nvmem.txt index fd06c09b82..46a7ef485e 100644 --- a/dts/Bindings/nvmem/nvmem.txt +++ b/dts/Bindings/nvmem/nvmem.txt @@ -1,80 +1 @@ -= NVMEM(Non Volatile Memory) Data Device Tree Bindings = - -This binding is intended to represent the location of hardware -configuration data stored in NVMEMs like eeprom, efuses and so on. - -On a significant proportion of boards, the manufacturer has stored -some data on NVMEM, for the OS to be able to retrieve these information -and act upon it. Obviously, the OS has to know about where to retrieve -these data from, and where they are stored on the storage device. - -This document is here to document this. - -= Data providers = -Contains bindings specific to provider drivers and data cells as children -of this node. - -Optional properties: - read-only: Mark the provider as read only. - -= Data cells = -These are the child nodes of the provider which contain data cell -information like offset and size in nvmem provider. - -Required properties: -reg: specifies the offset in byte within the storage device. - -Optional properties: - -bits: Is pair of bit location and number of bits, which specifies offset - in bit and number of bits within the address range specified by reg property. - Offset takes values from 0-7. - -For example: - - /* Provider */ - qfprom: qfprom@700000 { - ... - - /* Data cells */ - tsens_calibration: calib@404 { - reg = <0x404 0x10>; - }; - - tsens_calibration_bckp: calib_bckp@504 { - reg = <0x504 0x11>; - bits = <6 128> - }; - - pvs_version: pvs-version@6 { - reg = <0x6 0x2> - bits = <7 2> - }; - - speed_bin: speed-bin@c{ - reg = <0xc 0x1>; - bits = <2 3>; - - }; - ... - }; - -= Data consumers = -Are device nodes which consume nvmem data cells/providers. - -Required-properties: -nvmem-cells: list of phandle to the nvmem data cells. -nvmem-cell-names: names for the each nvmem-cells specified. Required if - nvmem-cells is used. - -Optional-properties: -nvmem : list of phandles to nvmem providers. -nvmem-names: names for the each nvmem provider. required if nvmem is used. - -For example: - - tsens { - ... - nvmem-cells = <&tsens_calibration>; - nvmem-cell-names = "calibration"; - }; +This file has been moved to nvmem.yaml and nvmem-consumer.yaml. diff --git a/dts/Bindings/nvmem/nvmem.yaml b/dts/Bindings/nvmem/nvmem.yaml new file mode 100644 index 0000000000..1c75a05920 --- /dev/null +++ b/dts/Bindings/nvmem/nvmem.yaml @@ -0,0 +1,93 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/nvmem/nvmem.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVMEM (Non Volatile Memory) Device Tree Bindings + +maintainers: + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> + +description: | + This binding is intended to represent the location of hardware + configuration data stored in NVMEMs like eeprom, efuses and so on. + + On a significant proportion of boards, the manufacturer has stored + some data on NVMEM, for the OS to be able to retrieve these + information and act upon it. Obviously, the OS has to know about + where to retrieve these data from, and where they are stored on the + storage device. + +properties: + $nodename: + pattern: "^(eeprom|efuse|nvram)(@.*|-[0-9a-f])*$" + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + read-only: + $ref: /schemas/types.yaml#/definitions/flag + description: + Mark the provider as read only. + +patternProperties: + "^.*@[0-9a-f]+$": + type: object + + properties: + reg: + maxItems: 1 + description: + Offset and size in bytes within the storage device. + + bits: + maxItems: 1 + items: + items: + - minimum: 0 + maximum: 7 + description: + Offset in bit within the address range specified by reg. + - minimum: 1 + description: + Size in bit within the address range specified by reg. + + required: + - reg + + additionalProperties: false + +examples: + - | + qfprom: eeprom@700000 { + #address-cells = <1>; + #size-cells = <1>; + + /* ... */ + + /* Data cells */ + tsens_calibration: calib@404 { + reg = <0x404 0x10>; + }; + + tsens_calibration_bckp: calib_bckp@504 { + reg = <0x504 0x11>; + bits = <6 128>; + }; + + pvs_version: pvs-version@6 { + reg = <0x6 0x2>; + bits = <7 2>; + }; + + speed_bin: speed-bin@c{ + reg = <0xc 0x1>; + bits = <2 3>; + }; + }; + +... diff --git a/dts/Bindings/pci/83xx-512x-pci.txt b/dts/Bindings/pci/83xx-512x-pci.txt index b9165b7247..3abeecf498 100644 --- a/dts/Bindings/pci/83xx-512x-pci.txt +++ b/dts/Bindings/pci/83xx-512x-pci.txt @@ -9,7 +9,6 @@ Freescale 83xx and 512x SOCs include the same PCI bridge core. Example (MPC8313ERDB) pci0: pci@e0008500 { - cell-index = <1>; interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x0E -mini PCI */ diff --git a/dts/Bindings/pci/amlogic,meson-pcie.txt b/dts/Bindings/pci/amlogic,meson-pcie.txt index 12b18f82d4..efa2c8b9b8 100644 --- a/dts/Bindings/pci/amlogic,meson-pcie.txt +++ b/dts/Bindings/pci/amlogic,meson-pcie.txt @@ -3,7 +3,7 @@ Amlogic Meson AXG DWC PCIE SoC controller Amlogic Meson PCIe host controller is based on the Synopsys DesignWare PCI core. It shares common functions with the PCIe DesignWare core driver and inherits common properties defined in -Documentation/devicetree/bindings/pci/designware-pci.txt. +Documentation/devicetree/bindings/pci/designware-pcie.txt. Additional properties are described here: diff --git a/dts/Bindings/pci/mobiveil-pcie.txt b/dts/Bindings/pci/mobiveil-pcie.txt index a618d4787d..64156993e0 100644 --- a/dts/Bindings/pci/mobiveil-pcie.txt +++ b/dts/Bindings/pci/mobiveil-pcie.txt @@ -10,8 +10,10 @@ Required properties: interrupt source. The value must be 1. - compatible: Should contain "mbvl,gpex40-pcie" - reg: Should contain PCIe registers location and length + Mandatory: "config_axi_slave": PCIe controller registers "csr_axi_slave" : Bridge config registers + Optional: "gpio_slave" : GPIO registers to control slot power "apb_csr" : MSI registers diff --git a/dts/Bindings/pci/nvidia,tegra20-pcie.txt b/dts/Bindings/pci/nvidia,tegra20-pcie.txt index 145a4f0419..7939bca478 100644 --- a/dts/Bindings/pci/nvidia,tegra20-pcie.txt +++ b/dts/Bindings/pci/nvidia,tegra20-pcie.txt @@ -65,6 +65,14 @@ Required properties: - afi - pcie_x +Optional properties: +- pinctrl-names: A list of pinctrl state names. Must contain the following + entries: + - "default": active state, puts PCIe I/O out of deep power down state + - "idle": puts PCIe I/O into deep power down state +- pinctrl-0: phandle for the default/active state of pin configurations. +- pinctrl-1: phandle for the idle state of pin configurations. + Required properties on Tegra124 and later (deprecated): - phys: Must contain an entry for each entry in phy-names. - phy-names: Must include the following entries: diff --git a/dts/Bindings/pci/pci.txt b/dts/Bindings/pci/pci.txt index 92c01db610..2a5d910240 100644 --- a/dts/Bindings/pci/pci.txt +++ b/dts/Bindings/pci/pci.txt @@ -24,6 +24,9 @@ driver implementation may support the following properties: unsupported link speed, for instance, trying to do training for unsupported link speed, etc. Must be '4' for gen4, '3' for gen3, '2' for gen2, and '1' for gen1. Any other values are invalid. +- reset-gpios: + If present this property specifies PERST# GPIO. Host drivers can parse the + GPIO and apply fundamental reset to endpoints. PCI-PCI Bridge properties ------------------------- diff --git a/dts/Bindings/pci/qcom,pcie.txt b/dts/Bindings/pci/qcom,pcie.txt index 1fd703bd73..ada80b01bf 100644 --- a/dts/Bindings/pci/qcom,pcie.txt +++ b/dts/Bindings/pci/qcom,pcie.txt @@ -10,6 +10,7 @@ - "qcom,pcie-msm8996" for msm8996 or apq8096 - "qcom,pcie-ipq4019" for ipq4019 - "qcom,pcie-ipq8074" for ipq8074 + - "qcom,pcie-qcs404" for qcs404 - reg: Usage: required @@ -116,6 +117,15 @@ - "ahb" AHB clock - "aux" Auxiliary clock +- clock-names: + Usage: required for qcs404 + Value type: <stringlist> + Definition: Should contain the following entries + - "iface" AHB clock + - "aux" Auxiliary clock + - "master_bus" AXI Master clock + - "slave_bus" AXI Slave clock + - resets: Usage: required Value type: <prop-encoded-array> @@ -167,6 +177,17 @@ - "ahb" AHB Reset - "axi_m_sticky" AXI Master Sticky reset +- reset-names: + Usage: required for qcs404 + Value type: <stringlist> + Definition: Should contain the following entries + - "axi_m" AXI Master reset + - "axi_s" AXI Slave reset + - "axi_m_sticky" AXI Master Sticky reset + - "pipe_sticky" PIPE sticky reset + - "pwr" PWR reset + - "ahb" AHB reset + - power-domains: Usage: required for apq8084 and msm8996/apq8096 Value type: <prop-encoded-array> @@ -195,12 +216,12 @@ Definition: A phandle to the PCIe endpoint power supply - phys: - Usage: required for apq8084 + Usage: required for apq8084 and qcs404 Value type: <phandle> Definition: List of phandle(s) as listed in phy-names property - phy-names: - Usage: required for apq8084 + Usage: required for apq8084 and qcs404 Value type: <stringlist> Definition: Should contain "pciephy" diff --git a/dts/Bindings/pci/rcar-pci.txt b/dts/Bindings/pci/rcar-pci.txt index 6904882a0e..45bba9f88a 100644 --- a/dts/Bindings/pci/rcar-pci.txt +++ b/dts/Bindings/pci/rcar-pci.txt @@ -3,6 +3,7 @@ Required properties: compatible: "renesas,pcie-r8a7743" for the R8A7743 SoC; "renesas,pcie-r8a7744" for the R8A7744 SoC; + "renesas,pcie-r8a774a1" for the R8A774A1 SoC; "renesas,pcie-r8a774c0" for the R8A774C0 SoC; "renesas,pcie-r8a7779" for the R8A7779 SoC; "renesas,pcie-r8a7790" for the R8A7790 SoC; diff --git a/dts/Bindings/perf/fsl-imx-ddr.txt b/dts/Bindings/perf/fsl-imx-ddr.txt new file mode 100644 index 0000000000..d77e3f26f9 --- /dev/null +++ b/dts/Bindings/perf/fsl-imx-ddr.txt @@ -0,0 +1,21 @@ +* Freescale(NXP) IMX8 DDR performance monitor + +Required properties: + +- compatible: should be one of: + "fsl,imx8-ddr-pmu" + "fsl,imx8m-ddr-pmu" + +- reg: physical address and size + +- interrupts: single interrupt + generated by the control block + +Example: + + ddr-pmu@5c020000 { + compatible = "fsl,imx8-ddr-pmu"; + reg = <0x5c020000 0x10000>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; + }; diff --git a/dts/Bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml b/dts/Bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml new file mode 100644 index 0000000000..fa46670de2 --- /dev/null +++ b/dts/Bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml @@ -0,0 +1,57 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/allwinner,sun6i-a31-mipi-dphy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A31 MIPI D-PHY Controller Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <maxime.ripard@bootlin.com> + +properties: + "#phy-cells": + const: 0 + + compatible: + const: allwinner,sun6i-a31-mipi-dphy + + reg: + maxItems: 1 + + clocks: + items: + - description: Bus Clock + - description: Module Clock + + clock-names: + items: + - const: bus + - const: mod + + resets: + maxItems: 1 + +required: + - "#phy-cells" + - compatible + - reg + - clocks + - clock-names + - resets + +additionalProperties: false + +examples: + - | + dphy0: d-phy@1ca1000 { + compatible = "allwinner,sun6i-a31-mipi-dphy"; + reg = <0x01ca1000 0x1000>; + clocks = <&ccu 23>, <&ccu 97>; + clock-names = "bus", "mod"; + resets = <&ccu 4>; + #phy-cells = <0>; + }; + +... diff --git a/dts/Bindings/phy/mixel,mipi-dsi-phy.txt b/dts/Bindings/phy/mixel,mipi-dsi-phy.txt new file mode 100644 index 0000000000..9b23407233 --- /dev/null +++ b/dts/Bindings/phy/mixel,mipi-dsi-phy.txt @@ -0,0 +1,29 @@ +Mixel DSI PHY for i.MX8 + +The Mixel MIPI-DSI PHY IP block is e.g. found on i.MX8 platforms (along the +MIPI-DSI IP from Northwest Logic). It represents the physical layer for the +electrical signals for DSI. + +Required properties: +- compatible: Must be: + - "fsl,imx8mq-mipi-dphy" +- clocks: Must contain an entry for each entry in clock-names. +- clock-names: Must contain the following entries: + - "phy_ref": phandle and specifier referring to the DPHY ref clock +- reg: the register range of the PHY controller +- #phy-cells: number of cells in PHY, as defined in + Documentation/devicetree/bindings/phy/phy-bindings.txt + this must be <0> + +Optional properties: +- power-domains: phandle to power domain + +Example: + dphy: dphy@30a0030 { + compatible = "fsl,imx8mq-mipi-dphy"; + clocks = <&clk IMX8MQ_CLK_DSI_PHY_REF>; + clock-names = "phy_ref"; + reg = <0x30a00300 0x100>; + power-domains = <&pd_mipi0>; + #phy-cells = <0>; + }; diff --git a/dts/Bindings/phy/mxs-usb-phy.txt b/dts/Bindings/phy/mxs-usb-phy.txt index 6ac98b3b5f..c9f5c0caf8 100644 --- a/dts/Bindings/phy/mxs-usb-phy.txt +++ b/dts/Bindings/phy/mxs-usb-phy.txt @@ -7,6 +7,7 @@ Required properties: * "fsl,imx6sl-usbphy" for imx6sl * "fsl,vf610-usbphy" for Vybrid vf610 * "fsl,imx6sx-usbphy" for imx6sx + * "fsl,imx7ulp-usbphy" for imx7ulp "fsl,imx23-usbphy" is still a fallback for other strings - reg: Should contain registers location and length - interrupts: Should contain phy interrupt @@ -23,7 +24,7 @@ Optional properties: the 17.78mA TX reference current. Default: 100 Example: -usbphy1: usbphy@20c9000 { +usbphy1: usb-phy@20c9000 { compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy"; reg = <0x020c9000 0x1000>; interrupts = <0 44 0x04>; diff --git a/dts/Bindings/phy/nvidia,tegra124-xusb-padctl.txt b/dts/Bindings/phy/nvidia,tegra124-xusb-padctl.txt index daedb15f32..9fb682e47c 100644 --- a/dts/Bindings/phy/nvidia,tegra124-xusb-padctl.txt +++ b/dts/Bindings/phy/nvidia,tegra124-xusb-padctl.txt @@ -42,6 +42,18 @@ Required properties: - reset-names: Must include the following entries: - "padctl" +For Tegra124: +- avdd-pll-utmip-supply: UTMI PLL power supply. Must supply 1.8 V. +- avdd-pll-erefe-supply: PLLE reference PLL power supply. Must supply 1.05 V. +- avdd-pex-pll-supply: PCIe/USB3 PLL power supply. Must supply 1.05 V. +- hvdd-pex-pll-e-supply: High-voltage PLLE power supply. Must supply 3.3 V. + +For Tegra210: +- avdd-pll-utmip-supply: UTMI PLL power supply. Must supply 1.8 V. +- avdd-pll-uerefe-supply: PLLE reference PLL power supply. Must supply 1.05 V. +- dvdd-pex-pll-supply: PCIe/USB3 PLL power supply. Must supply 1.05 V. +- hvdd-pex-pll-e-supply: High-voltage PLLE power supply. Must supply 1.8 V. + For Tegra186: - avdd-pll-erefeut-supply: UPHY brick and reference clock as well as UTMI PHY power supply. Must supply 1.8 V. diff --git a/dts/Bindings/phy/phy-bindings.txt b/dts/Bindings/phy/phy-bindings.txt index a403b81d06..c4eb389025 100644 --- a/dts/Bindings/phy/phy-bindings.txt +++ b/dts/Bindings/phy/phy-bindings.txt @@ -1,5 +1,5 @@ This document explains only the device tree data binding. For general -information about PHY subsystem refer to Documentation/phy.txt +information about PHY subsystem refer to Documentation/driver-api/phy/phy.rst PHY device node =============== diff --git a/dts/Bindings/phy/phy-pxa-usb.txt b/dts/Bindings/phy/phy-pxa-usb.txt new file mode 100644 index 0000000000..d80e36a77e --- /dev/null +++ b/dts/Bindings/phy/phy-pxa-usb.txt @@ -0,0 +1,18 @@ +Marvell PXA USB PHY +------------------- + +Required properties: +- compatible: one of: "marvell,mmp2-usb-phy", "marvell,pxa910-usb-phy", + "marvell,pxa168-usb-phy", +- #phy-cells: must be 0 + +Example: + usb-phy: usbphy@d4207000 { + compatible = "marvell,mmp2-usb-phy"; + reg = <0xd4207000 0x40>; + #phy-cells = <0>; + status = "okay"; + }; + +This document explains the device tree binding. For general +information about PHY subsystem refer to Documentation/driver-api/phy/phy.rst diff --git a/dts/Bindings/phy/qcom-pcie2-phy.txt b/dts/Bindings/phy/qcom-pcie2-phy.txt new file mode 100644 index 0000000000..30064253f2 --- /dev/null +++ b/dts/Bindings/phy/qcom-pcie2-phy.txt @@ -0,0 +1,42 @@ +Qualcomm PCIe2 PHY controller +============================= + +The Qualcomm PCIe2 PHY is a Synopsys based phy found in a number of Qualcomm +platforms. + +Required properties: + - compatible: compatible list, should be: + "qcom,qcs404-pcie2-phy", "qcom,pcie2-phy" + + - reg: offset and length of the PHY register set. + - #phy-cells: must be 0. + + - clocks: a clock-specifier pair for the "pipe" clock + + - vdda-vp-supply: phandle to low voltage regulator + - vdda-vph-supply: phandle to high voltage regulator + + - resets: reset-specifier pairs for the "phy" and "pipe" resets + - reset-names: list of resets, should contain: + "phy" and "pipe" + + - clock-output-names: name of the outgoing clock signal from the PHY PLL + - #clock-cells: must be 0 + +Example: + phy@7786000 { + compatible = "qcom,qcs404-pcie2-phy", "qcom,pcie2-phy"; + reg = <0x07786000 0xb8>; + + clocks = <&gcc GCC_PCIE_0_PIPE_CLK>; + resets = <&gcc GCC_PCIEPHY_0_PHY_BCR>, + <&gcc GCC_PCIE_0_PIPE_ARES>; + reset-names = "phy", "pipe"; + + vdda-vp-supply = <&vreg_l3_1p05>; + vdda-vph-supply = <&vreg_l5_1p8>; + + clock-output-names = "pcie_0_pipe_clk"; + #clock-cells = <0>; + #phy-cells = <0>; + }; diff --git a/dts/Bindings/phy/rcar-gen3-phy-usb2.txt b/dts/Bindings/phy/rcar-gen3-phy-usb2.txt index d46188f450..503a8cfb31 100644 --- a/dts/Bindings/phy/rcar-gen3-phy-usb2.txt +++ b/dts/Bindings/phy/rcar-gen3-phy-usb2.txt @@ -1,10 +1,12 @@ * Renesas R-Car generation 3 USB 2.0 PHY This file provides information on what the device node for the R-Car generation -3, RZ/G1C and RZ/G2 USB 2.0 PHY contain. +3, RZ/G1C, RZ/G2 and RZ/A2 USB 2.0 PHY contain. Required properties: -- compatible: "renesas,usb2-phy-r8a77470" if the device is a part of an R8A77470 +- compatible: "renesas,usb2-phy-r7s9210" if the device is a part of an R7S9210 + SoC. + "renesas,usb2-phy-r8a77470" if the device is a part of an R8A77470 SoC. "renesas,usb2-phy-r8a774a1" if the device is a part of an R8A774A1 SoC. @@ -20,8 +22,8 @@ Required properties: R8A77990 SoC. "renesas,usb2-phy-r8a77995" if the device is a part of an R8A77995 SoC. - "renesas,rcar-gen3-usb2-phy" for a generic R-Car Gen3 or RZ/G2 - compatible device. + "renesas,rcar-gen3-usb2-phy" for a generic R-Car Gen3, RZ/G2 or + RZ/A2 compatible device. When compatible with the generic version, nodes must list the SoC-specific version corresponding to the platform first @@ -46,6 +48,9 @@ channel as USB OTG: regulator will be managed during the PHY power on/off sequence. - renesas,no-otg-pins: boolean, specify when a board does not provide proper otg pins. +- dr_mode: string, indicates the working mode for the PHY. Can be "host", + "peripheral", or "otg". Should be set if otg controller is not used. + Example (R-Car H3): diff --git a/dts/Bindings/pinctrl/allwinner,sunxi-pinctrl.txt b/dts/Bindings/pinctrl/allwinner,sunxi-pinctrl.txt index cf96b7c20e..328585c6da 100644 --- a/dts/Bindings/pinctrl/allwinner,sunxi-pinctrl.txt +++ b/dts/Bindings/pinctrl/allwinner,sunxi-pinctrl.txt @@ -24,6 +24,8 @@ Required properties: "allwinner,sun8i-h3-pinctrl" "allwinner,sun8i-h3-r-pinctrl" "allwinner,sun8i-r40-pinctrl" + "allwinner,sun8i-v3-pinctrl" + "allwinner,sun8i-v3s-pinctrl" "allwinner,sun50i-a64-pinctrl" "allwinner,sun50i-a64-r-pinctrl" "allwinner,sun50i-h5-pinctrl" diff --git a/dts/Bindings/pinctrl/aspeed,ast2400-pinctrl.yaml b/dts/Bindings/pinctrl/aspeed,ast2400-pinctrl.yaml new file mode 100644 index 0000000000..125599a2dc --- /dev/null +++ b/dts/Bindings/pinctrl/aspeed,ast2400-pinctrl.yaml @@ -0,0 +1,83 @@ +# SPDX-License-Identifier: GPL-2.0-or-later +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/aspeed,ast2400-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ASPEED AST2400 Pin Controller + +maintainers: + - Andrew Jeffery <andrew@aj.id.au> + +description: |+ + The pin controller node should be the child of a syscon node with the + required property: + + - compatible: Should be one of the following: + "aspeed,ast2400-scu", "syscon", "simple-mfd" + "aspeed,g4-scu", "syscon", "simple-mfd" + + Refer to the the bindings described in + Documentation/devicetree/bindings/mfd/syscon.txt + +properties: + compatible: + enum: + - aspeed,ast2400-pinctrl + - aspeed,g4-pinctrl + +patternProperties: + '^.*$': + if: + type: object + then: + patternProperties: + "^function|groups$": + allOf: + - $ref: "/schemas/types.yaml#/definitions/string" + - enum: [ "ACPI", "ADC0", "ADC1", "ADC10", "ADC11", "ADC12", "ADC13", + "ADC14", "ADC15", "ADC2", "ADC3", "ADC4", "ADC5", "ADC6", "ADC7", + "ADC8", "ADC9", "BMCINT", "DDCCLK", "DDCDAT", "EXTRST", "FLACK", + "FLBUSY", "FLWP", "GPID", "GPID0", "GPID2", "GPID4", "GPID6", + "GPIE0", "GPIE2", "GPIE4", "GPIE6", "I2C10", "I2C11", "I2C12", + "I2C13", "I2C14", "I2C3", "I2C4", "I2C5", "I2C6", "I2C7", "I2C8", + "I2C9", "LPCPD", "LPCPME", "LPCRST", "LPCSMI", "MAC1LINK", + "MAC2LINK", "MDIO1", "MDIO2", "NCTS1", "NCTS2", "NCTS3", "NCTS4", + "NDCD1", "NDCD2", "NDCD3", "NDCD4", "NDSR1", "NDSR2", "NDSR3", + "NDSR4", "NDTR1", "NDTR2", "NDTR3", "NDTR4", "NDTS4", "NRI1", + "NRI2", "NRI3", "NRI4", "NRTS1", "NRTS2", "NRTS3", "OSCCLK", + "PWM0", "PWM1", "PWM2", "PWM3", "PWM4", "PWM5", "PWM6", "PWM7", + "RGMII1", "RGMII2", "RMII1", "RMII2", "ROM16", "ROM8", "ROMCS1", + "ROMCS2", "ROMCS3", "ROMCS4", "RXD1", "RXD2", "RXD3", "RXD4", + "SALT1", "SALT2", "SALT3", "SALT4", "SD1", "SD2", "SGPMCK", + "SGPMI", "SGPMLD", "SGPMO", "SGPSCK", "SGPSI0", "SGPSI1", "SGPSLD", + "SIOONCTRL", "SIOPBI", "SIOPBO", "SIOPWREQ", "SIOPWRGD", "SIOS3", + "SIOS5", "SIOSCI", "SPI1", "SPI1DEBUG", "SPI1PASSTHRU", "SPICS1", + "TIMER3", "TIMER4", "TIMER5", "TIMER6", "TIMER7", "TIMER8", "TXD1", + "TXD2", "TXD3", "TXD4", "UART6", "USB11D1", "USB11H2", "USB2D1", + "USB2H1", "USBCKI", "VGABIOS_ROM", "VGAHS", "VGAVS", "VPI18", + "VPI24", "VPI30", "VPO12", "VPO24", "WDTRST1", "WDTRST2" ] + +required: + - compatible + +examples: + - | + syscon: scu@1e6e2000 { + compatible = "aspeed,ast2400-scu", "syscon", "simple-mfd"; + reg = <0x1e6e2000 0x1a8>; + + pinctrl: pinctrl { + compatible = "aspeed,g4-pinctrl"; + + pinctrl_i2c3_default: i2c3_default { + function = "I2C3"; + groups = "I2C3"; + }; + + pinctrl_gpioh0_unbiased_default: gpioh0 { + pins = "A8"; + bias-disable; + }; + }; + }; diff --git a/dts/Bindings/pinctrl/aspeed,ast2500-pinctrl.yaml b/dts/Bindings/pinctrl/aspeed,ast2500-pinctrl.yaml new file mode 100644 index 0000000000..3e6d853185 --- /dev/null +++ b/dts/Bindings/pinctrl/aspeed,ast2500-pinctrl.yaml @@ -0,0 +1,133 @@ +# SPDX-License-Identifier: GPL-2.0-or-later +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/aspeed,ast2500-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ASPEED AST2500 Pin Controller + +maintainers: + - Andrew Jeffery <andrew@aj.id.au> + +description: |+ + The pin controller node should be the child of a syscon node with the + required property: + + - compatible: Should be one of the following: + "aspeed,ast2500-scu", "syscon", "simple-mfd" + "aspeed,g5-scu", "syscon", "simple-mfd" + + Refer to the the bindings described in + Documentation/devicetree/bindings/mfd/syscon.txt + +properties: + compatible: + enum: + - aspeed,ast2500-pinctrl + - aspeed,g5-pinctrl + aspeed,external-nodes: + minItems: 2 + maxItems: 2 + allOf: + - $ref: /schemas/types.yaml#/definitions/phandle-array + description: | + A cell of phandles to external controller nodes: + 0: compatible with "aspeed,ast2500-gfx", "syscon" + 1: compatible with "aspeed,ast2500-lhc", "syscon" + +patternProperties: + '^.*$': + if: + type: object + then: + patternProperties: + "^function|groups$": + allOf: + - $ref: "/schemas/types.yaml#/definitions/string" + - enum: [ "ACPI", "ADC0", "ADC1", "ADC10", "ADC11", "ADC12", "ADC13", + "ADC14", "ADC15", "ADC2", "ADC3", "ADC4", "ADC5", "ADC6", "ADC7", + "ADC8", "ADC9", "BMCINT", "DDCCLK", "DDCDAT", "ESPI", "FWSPICS1", + "FWSPICS2", "GPID0", "GPID2", "GPID4", "GPID6", "GPIE0", "GPIE2", + "GPIE4", "GPIE6", "I2C10", "I2C11", "I2C12", "I2C13", "I2C14", + "I2C3", "I2C4", "I2C5", "I2C6", "I2C7", "I2C8", "I2C9", "LAD0", + "LAD1", "LAD2", "LAD3", "LCLK", "LFRAME", "LPCHC", "LPCPD", + "LPCPLUS", "LPCPME", "LPCRST", "LPCSMI", "LSIRQ", "MAC1LINK", + "MAC2LINK", "MDIO1", "MDIO2", "NCTS1", "NCTS2", "NCTS3", "NCTS4", + "NDCD1", "NDCD2", "NDCD3", "NDCD4", "NDSR1", "NDSR2", "NDSR3", + "NDSR4", "NDTR1", "NDTR2", "NDTR3", "NDTR4", "NRI1", "NRI2", + "NRI3", "NRI4", "NRTS1", "NRTS2", "NRTS3", "NRTS4", "OSCCLK", + "PEWAKE", "PNOR", "PWM0", "PWM1", "PWM2", "PWM3", "PWM4", "PWM5", + "PWM6", "PWM7", "RGMII1", "RGMII2", "RMII1", "RMII2", "RXD1", + "RXD2", "RXD3", "RXD4", "SALT1", "SALT10", "SALT11", "SALT12", + "SALT13", "SALT14", "SALT2", "SALT3", "SALT4", "SALT5", "SALT6", + "SALT7", "SALT8", "SALT9", "SCL1", "SCL2", "SD1", "SD2", "SDA1", + "SDA2", "SGPS1", "SGPS2", "SIOONCTRL", "SIOPBI", "SIOPBO", + "SIOPWREQ", "SIOPWRGD", "SIOS3", "SIOS5", "SIOSCI", "SPI1", + "SPI1CS1", "SPI1DEBUG", "SPI1PASSTHRU", "SPI2CK", "SPI2CS0", + "SPI2CS1", "SPI2MISO", "SPI2MOSI", "TIMER3", "TIMER4", "TIMER5", + "TIMER6", "TIMER7", "TIMER8", "TXD1", "TXD2", "TXD3", "TXD4", + "UART6", "USB11BHID", "USB2AD", "USB2AH", "USB2BD", "USB2BH", + "USBCKI", "VGABIOSROM", "VGAHS", "VGAVS", "VPI24", "VPO", + "WDTRST1", "WDTRST2", ] + +required: + - compatible + - aspeed,external-nodes + +examples: + - | + apb { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + syscon: scu@1e6e2000 { + compatible = "aspeed,ast2500-scu", "syscon", "simple-mfd"; + reg = <0x1e6e2000 0x1a8>; + + pinctrl: pinctrl { + compatible = "aspeed,g5-pinctrl"; + aspeed,external-nodes = <&gfx>, <&lhc>; + + pinctrl_i2c3_default: i2c3_default { + function = "I2C3"; + groups = "I2C3"; + }; + + pinctrl_gpioh0_unbiased_default: gpioh0 { + pins = "A18"; + bias-disable; + }; + }; + }; + + gfx: display@1e6e6000 { + compatible = "aspeed,ast2500-gfx", "syscon"; + reg = <0x1e6e6000 0x1000>; + }; + }; + + lpc: lpc@1e789000 { + compatible = "aspeed,ast2500-lpc", "simple-mfd"; + reg = <0x1e789000 0x1000>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x1e789000 0x1000>; + + lpc_host: lpc-host@80 { + compatible = "aspeed,ast2500-lpc-host", "simple-mfd", "syscon"; + reg = <0x80 0x1e0>; + reg-io-width = <4>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x80 0x1e0>; + + lhc: lhc@20 { + compatible = "aspeed,ast2500-lhc"; + reg = <0x20 0x24 0x48 0x8>; + }; + }; + }; diff --git a/dts/Bindings/pinctrl/bitmain,bm1880-pinctrl.txt b/dts/Bindings/pinctrl/bitmain,bm1880-pinctrl.txt index ed34bb1ee8..4980776122 100644 --- a/dts/Bindings/pinctrl/bitmain,bm1880-pinctrl.txt +++ b/dts/Bindings/pinctrl/bitmain,bm1880-pinctrl.txt @@ -14,7 +14,8 @@ phrase "pin configuration node". The pin configuration nodes act as a container for an arbitrary number of subnodes. Each of these subnodes represents some desired configuration for a pin, a group, or a list of pins or groups. This configuration for BM1880 SoC -includes only pinmux as there is no pinconf support available in SoC. +includes pinmux and various pin configuration parameters, such as pull-up, +slew rate etc... Each configuration node can consist of multiple nodes describing the pinmux options. The name of each subnode is not important; all subnodes should be @@ -84,10 +85,37 @@ Required Properties: gpio66, gpio67, eth1, i2s0, i2s0_mclkin, i2s1, i2s1_mclkin, spi0 +Optional Properties: + +- bias-disable: No arguments. Disable pin bias. +- bias-pull-down: No arguments. The specified pins should be configured as + pull down. +- bias-pull-up: No arguments. The specified pins should be configured as + pull up. +- input-schmitt-enable: No arguments: Enable schmitt trigger for the specified + pins +- input-schmitt-disable: No arguments: Disable schmitt trigger for the specified + pins +- slew-rate: Integer. Sets slew rate for the specified pins. + Valid values are: + <0> - Slow + <1> - Fast +- drive-strength: Integer. Selects the drive strength for the specified + pins in mA. + Valid values are: + <4> + <8> + <12> + <16> + <20> + <24> + <28> + <32> + Example: - pinctrl: pinctrl@50 { + pinctrl: pinctrl@400 { compatible = "bitmain,bm1880-pinctrl"; - reg = <0x50 0x4B0>; + reg = <0x400 0x120>; pinctrl_uart0_default: uart0-default { pinmux { diff --git a/dts/Bindings/pinctrl/brcm,bcm2835-gpio.txt b/dts/Bindings/pinctrl/brcm,bcm2835-gpio.txt index 3fac0a061b..ac6d614d74 100644 --- a/dts/Bindings/pinctrl/brcm,bcm2835-gpio.txt +++ b/dts/Bindings/pinctrl/brcm,bcm2835-gpio.txt @@ -5,6 +5,9 @@ controller, and pinmux/control device. Required properties: - compatible: "brcm,bcm2835-gpio" +- compatible: should be one of: + "brcm,bcm2835-gpio" - BCM2835 compatible pinctrl + "brcm,bcm7211-gpio" - BCM7211 compatible pinctrl - reg: Should contain the physical address of the GPIO module's registers. - gpio-controller: Marks the device node as a GPIO controller. - #gpio-cells : Should be two. The first cell is the pin number and the diff --git a/dts/Bindings/pinctrl/fsl,imx8mm-pinctrl.txt b/dts/Bindings/pinctrl/fsl,imx8mm-pinctrl.txt index 524a16fca6..e4e01c05cf 100644 --- a/dts/Bindings/pinctrl/fsl,imx8mm-pinctrl.txt +++ b/dts/Bindings/pinctrl/fsl,imx8mm-pinctrl.txt @@ -12,7 +12,7 @@ Required properties in sub-nodes: - fsl,pins: each entry consists of 6 integers and represents the mux and config setting for one pin. The first 5 integers <mux_reg conf_reg input_reg mux_val input_val> are specified using a PIN_FUNC_ID macro, which can be found in - <dt-bindings/pinctrl/imx8mm-pinfunc.h>. The last integer CONFIG is + <arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h>. The last integer CONFIG is the pad setting value like pull-up on this pin. Please refer to i.MX8M Mini Reference Manual for detailed CONFIG settings. diff --git a/dts/Bindings/pinctrl/fsl,imx8mn-pinctrl.txt b/dts/Bindings/pinctrl/fsl,imx8mn-pinctrl.txt new file mode 100644 index 0000000000..330716c971 --- /dev/null +++ b/dts/Bindings/pinctrl/fsl,imx8mn-pinctrl.txt @@ -0,0 +1,39 @@ +* Freescale IMX8MN IOMUX Controller + +Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory +for common binding part and usage. + +Required properties: +- compatible: "fsl,imx8mn-iomuxc" +- reg: should contain the base physical address and size of the iomuxc + registers. + +Required properties in sub-nodes: +- fsl,pins: each entry consists of 6 integers and represents the mux and config + setting for one pin. The first 5 integers <mux_reg conf_reg input_reg mux_val + input_val> are specified using a PIN_FUNC_ID macro, which can be found in + <arch/arm64/boot/dts/freescale/imx8mn-pinfunc.h>. The last integer CONFIG is + the pad setting value like pull-up on this pin. Please refer to i.MX8M Nano + Reference Manual for detailed CONFIG settings. + +Examples: + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; +}; + +iomuxc: pinctrl@30330000 { + compatible = "fsl,imx8mn-iomuxc"; + reg = <0x0 0x30330000 0x0 0x10000>; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX8MN_IOMUXC_UART1_RXD_UART1_DCE_RX 0x140 + MX8MN_IOMUXC_UART1_TXD_UART1_DCE_TX 0x140 + MX8MN_IOMUXC_UART3_RXD_UART1_DCE_CTS_B 0x140 + MX8MN_IOMUXC_UART3_TXD_UART1_DCE_RTS_B 0x140 + MX8MN_IOMUXC_SD1_DATA4_GPIO2_IO6 0x19 + >; + }; +}; diff --git a/dts/Bindings/pinctrl/marvell,kirkwood-pinctrl.txt b/dts/Bindings/pinctrl/marvell,kirkwood-pinctrl.txt index 6c0ea155b7..2932f171ee 100644 --- a/dts/Bindings/pinctrl/marvell,kirkwood-pinctrl.txt +++ b/dts/Bindings/pinctrl/marvell,kirkwood-pinctrl.txt @@ -6,8 +6,8 @@ part and usage. Required properties: - compatible: "marvell,88f6180-pinctrl", "marvell,88f6190-pinctrl", "marvell,88f6192-pinctrl", - "marvell,88f6281-pinctrl", "marvell,88f6282-pinctrl" - "marvell,98dx4122-pinctrl" + "marvell,88f6281-pinctrl", "marvell,88f6282-pinctrl", + "marvell,98dx4122-pinctrl", "marvell,98dx1135-pinctrl" - reg: register specifier of MPP registers This driver supports all kirkwood variants, i.e. 88f6180, 88f619x, and 88f628x. @@ -317,3 +317,43 @@ mpp44 44 gpio mpp45 45 gpio mpp49 49 gpio +* Marvell Poncat2 98dx1135 + +name pins functions +================================================================================ + +mpp0 0 gpio, nand(io2), spi(cs) +mpp1 1 gpo, nand(io3), spi(mosi) +mpp2 2 gpo, nand(io4), spi(sck) +mpp3 3 gpo, nand(io5), spi(miso) +mpp4 4 gpio, nand(io6), uart0(rxd) +mpp5 5 gpo, nand(io7), uart0(txd) +mpp6 6 sysrst(out) +mpp7 7 gpo, spi(cs) +mpp8 8 gpio, twsi0(sda), uart1(rts) +mpp9 9 gpio, twsi(sck), uart1(cts) +mpp10 10 gpo, uart0(txd) +mpp11 11 gpio, uart0(rxd) +mpp13 13 gpio, uart1(txd) +mpp14 14 gpio, uart1(rxd) +mpp15 15 gpio, uart0(rts) +mpp16 16 gpio, uart0(cts) +mpp17 17 gpio, nand(cle) +mpp18 18 gpo, nand(io0) +mpp19 19 gpo, nand(io1) +mpp20 20 gpio +mpp21 21 gpio +mpp22 22 gpio +mpp23 23 gpio +mpp24 24 gpio +mpp25 25 gpio +mpp26 26 gpio +mpp27 27 gpio +mpp28 28 gpio, nand(ren) +mpp29 29 gpio, nand(wen) +mpp30 30 gpio +mpp31 31 gpio +mpp32 32 gpio +mpp33 33 gpio +mpp34 34 gpio, nand(ale) +mpp35 35 gpio, nand(cen) diff --git a/dts/Bindings/pinctrl/meson,pinctrl.txt b/dts/Bindings/pinctrl/meson,pinctrl.txt index a47dd990a8..10dc4f7176 100644 --- a/dts/Bindings/pinctrl/meson,pinctrl.txt +++ b/dts/Bindings/pinctrl/meson,pinctrl.txt @@ -47,9 +47,19 @@ Required properties for pinmux nodes are: Required properties for configuration nodes: - pins: a list of pin names -Configuration nodes support the generic properties "bias-disable", -"bias-pull-up" and "bias-pull-down", described in file -pinctrl-bindings.txt +Configuration nodes support the following generic properties, as +described in file pinctrl-bindings.txt: + - "bias-disable" + - "bias-pull-up" + - "bias-pull-down" + - "output-enable" + - "output-disable" + - "output-low" + - "output-high" + +Optional properties : + - drive-strength-microamp: Drive strength for the specified pins in uA. + This property is only valid for G12A and newer. === Example === diff --git a/dts/Bindings/pinctrl/microchip,pic32-pinctrl.txt b/dts/Bindings/pinctrl/microchip,pic32-pinctrl.txt index 29b72e303e..51efd20851 100644 --- a/dts/Bindings/pinctrl/microchip,pic32-pinctrl.txt +++ b/dts/Bindings/pinctrl/microchip,pic32-pinctrl.txt @@ -5,7 +5,7 @@ Please refer to pinctrl-bindings.txt, ../gpio/gpio.txt, and pin controller, GPIO, and interrupt bindings. PIC32 'pin configuration node' is a node of a group of pins which can be -used for a specific device or function. This node represents configuraions of +used for a specific device or function. This node represents configurations of pins, optional function, and optional mux related configuration. Required properties for pin controller node: diff --git a/dts/Bindings/pinctrl/nuvoton,npcm7xx-pinctrl.txt b/dts/Bindings/pinctrl/nuvoton,npcm7xx-pinctrl.txt index 83f4bbac94..a1264cc866 100644 --- a/dts/Bindings/pinctrl/nuvoton,npcm7xx-pinctrl.txt +++ b/dts/Bindings/pinctrl/nuvoton,npcm7xx-pinctrl.txt @@ -213,4 +213,4 @@ pinctrl: pinctrl@f0800000 { groups = "clkreq"; function = "clkreq"; }; -};
\ No newline at end of file +}; diff --git a/dts/Bindings/pinctrl/nvidia,tegra194-pinmux.txt b/dts/Bindings/pinctrl/nvidia,tegra194-pinmux.txt new file mode 100644 index 0000000000..8763f448c3 --- /dev/null +++ b/dts/Bindings/pinctrl/nvidia,tegra194-pinmux.txt @@ -0,0 +1,107 @@ +NVIDIA Tegra194 pinmux controller + +Required properties: +- compatible: "nvidia,tegra194-pinmux" +- reg: Should contain a list of base address and size pairs for: + - first entry: The APB_MISC_GP_*_PADCTRL registers (pad control) + - second entry: The PINMUX_AUX_* registers (pinmux) + +Please refer to pinctrl-bindings.txt in this directory for details of the +common pinctrl bindings used by client devices, including the meaning of the +phrase "pin configuration node". + +Tegra's pin configuration nodes act as a container for an arbitrary number of +subnodes. Each of these subnodes represents some desired configuration for a +pin, a group, or a list of pins or groups. This configuration can include the +mux function to select on those pin(s)/group(s), and various pin configuration +parameters, such as pull-up, tristate, drive strength, etc. + +See the TRM to determine which properties and values apply to each pin/group. +Macro values for property values are defined in +include/dt-binding/pinctrl/pinctrl-tegra.h. + +Required subnode-properties: +- nvidia,pins : An array of strings. Each string contains the name of a pin or + group. Valid values for these names are listed below. + +Optional subnode-properties: +- nvidia,function: A string containing the name of the function to mux to the + pin or group. +- nvidia,pull: Integer, representing the pull-down/up to apply to the pin. + 0: none, 1: down, 2: up. +- nvidia,tristate: Integer. + 0: drive, 1: tristate. +- nvidia,enable-input: Integer. Enable the pin's input path. + enable :TEGRA_PIN_ENABLE and + disable or output only: TEGRA_PIN_DISABLE. +- nvidia,open-drain: Integer. + enable: TEGRA_PIN_ENABLE. + disable: TEGRA_PIN_DISABLE. +- nvidia,lock: Integer. Lock the pin configuration against further changes + until reset. + enable: TEGRA_PIN_ENABLE. + disable: TEGRA_PIN_DISABLE. +- nvidia,io-hv: Integer. Select high-voltage receivers. + normal: TEGRA_PIN_DISABLE + high: TEGRA_PIN_ENABLE +- nvidia,schmitt: Integer. Enables Schmitt Trigger on the input. + normal: TEGRA_PIN_DISABLE + high: TEGRA_PIN_ENABLE +- nvidia,drive-type: Integer. Valid range 0...3. +- nvidia,pull-down-strength: Integer. Controls drive strength. 0 is weakest. + The range of valid values depends on the pingroup. See "CAL_DRVDN" in the + Tegra TRM. +- nvidia,pull-up-strength: Integer. Controls drive strength. 0 is weakest. + The range of valid values depends on the pingroup. See "CAL_DRVUP" in the + Tegra TRM. + +Valid values for pin and group names (nvidia,pin) are: + + These correspond to Tegra PADCTL_* (pinmux) registers. + + Mux groups: + + These correspond to Tegra PADCTL_* (pinmux) registers. Any property + that exists in those registers may be set for the following pin names. + + pex_l5_clkreq_n_pgg0, pex_l5_rst_n_pgg1 + + Drive groups: + + These registers controls a single pin for which a mux group exists. + See the list above for the pin name to use when configuring the pinmux. + + pex_l5_clkreq_n_pgg0, pex_l5_rst_n_pgg1 + +Valid values for nvidia,functions are: + + pe5 + +Power Domain: + pex_l5_clkreq_n_pgg0 and pex_l5_rst_n_pgg1 are part of PCIE C5 power + partition. Client devices must enable this partition before accessing + these pins here. + + +Example: + + tegra_pinctrl: pinmux: pinmux@2430000 { + compatible = "nvidia,tegra194-pinmux"; + reg = <0x2430000 0x17000 + 0xc300000 0x4000>; + + pinctrl-names = "pex_rst"; + pinctrl-0 = <&pex_rst_c5_out_state>; + + pex_rst_c5_out_state: pex_rst_c5_out { + pex_rst { + nvidia,pins = "pex_l5_rst_n_pgg1"; + nvidia,schmitt = <TEGRA_PIN_DISABLE>; + nvidia,lpdr = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,io-high-voltage = <TEGRA_PIN_ENABLE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + }; + }; + }; diff --git a/dts/Bindings/pinctrl/pinctrl-aspeed.txt b/dts/Bindings/pinctrl/pinctrl-aspeed.txt deleted file mode 100644 index 3b7266c7c4..0000000000 --- a/dts/Bindings/pinctrl/pinctrl-aspeed.txt +++ /dev/null @@ -1,172 +0,0 @@ -====================== -Aspeed Pin Controllers -====================== - -The Aspeed SoCs vary in functionality inside a generation but have a common mux -device register layout. - -Required properties for g4: -- compatible : Should be one of the following: - "aspeed,ast2400-pinctrl" - "aspeed,g4-pinctrl" - -Required properties for g5: -- compatible : Should be one of the following: - "aspeed,ast2500-pinctrl" - "aspeed,g5-pinctrl" - -- aspeed,external-nodes: A cell of phandles to external controller nodes: - 0: compatible with "aspeed,ast2500-gfx", "syscon" - 1: compatible with "aspeed,ast2500-lhc", "syscon" - -The pin controller node should be the child of a syscon node with the required -property: - -- compatible : Should be one of the following: - "aspeed,ast2400-scu", "syscon", "simple-mfd" - "aspeed,g4-scu", "syscon", "simple-mfd" - "aspeed,ast2500-scu", "syscon", "simple-mfd" - "aspeed,g5-scu", "syscon", "simple-mfd" - -Refer to the the bindings described in -Documentation/devicetree/bindings/mfd/syscon.txt - -Subnode Format -============== - -The required properties of pinmux child nodes are: -- function: the mux function to select -- groups : the list of groups to select with this function - -Required properties of pinconf child nodes are: -- groups: A list of groups to select (either this or "pins" must be - specified) -- pins : A list of ball names as strings, eg "D14" (either this or "groups" - must be specified) - -Optional properties of pinconf child nodes are: -- bias-disable : disable any pin bias -- bias-pull-down: pull down the pin -- drive-strength: sink or source at most X mA - -Definitions are as specified in -Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt, with any -further limitations as described above. - -For pinmux, each mux function has only one associated pin group. Each group is -named by its function. The following values for the function and groups -properties are supported: - -aspeed,ast2400-pinctrl, aspeed,g4-pinctrl: - -ACPI ADC0 ADC1 ADC10 ADC11 ADC12 ADC13 ADC14 ADC15 ADC2 ADC3 ADC4 ADC5 ADC6 -ADC7 ADC8 ADC9 BMCINT DDCCLK DDCDAT EXTRST FLACK FLBUSY FLWP GPID GPID0 GPID2 -GPID4 GPID6 GPIE0 GPIE2 GPIE4 GPIE6 I2C10 I2C11 I2C12 I2C13 I2C14 I2C3 I2C4 -I2C5 I2C6 I2C7 I2C8 I2C9 LPCPD LPCPME LPCRST LPCSMI MAC1LINK MAC2LINK MDIO1 -MDIO2 NCTS1 NCTS2 NCTS3 NCTS4 NDCD1 NDCD2 NDCD3 NDCD4 NDSR1 NDSR2 NDSR3 NDSR4 -NDTR1 NDTR2 NDTR3 NDTR4 NDTS4 NRI1 NRI2 NRI3 NRI4 NRTS1 NRTS2 NRTS3 OSCCLK PWM0 -PWM1 PWM2 PWM3 PWM4 PWM5 PWM6 PWM7 RGMII1 RGMII2 RMII1 RMII2 ROM16 ROM8 ROMCS1 -ROMCS2 ROMCS3 ROMCS4 RXD1 RXD2 RXD3 RXD4 SALT1 SALT2 SALT3 SALT4 SD1 SD2 SGPMCK -SGPMI SGPMLD SGPMO SGPSCK SGPSI0 SGPSI1 SGPSLD SIOONCTRL SIOPBI SIOPBO SIOPWREQ -SIOPWRGD SIOS3 SIOS5 SIOSCI SPI1 SPI1DEBUG SPI1PASSTHRU SPICS1 TIMER3 TIMER4 -TIMER5 TIMER6 TIMER7 TIMER8 TXD1 TXD2 TXD3 TXD4 UART6 USB11D1 USB11H2 USB2D1 -USB2H1 USBCKI VGABIOS_ROM VGAHS VGAVS VPI18 VPI24 VPI30 VPO12 VPO24 WDTRST1 -WDTRST2 - -aspeed,ast2500-pinctrl, aspeed,g5-pinctrl: - -ACPI ADC0 ADC1 ADC10 ADC11 ADC12 ADC13 ADC14 ADC15 ADC2 ADC3 ADC4 ADC5 ADC6 -ADC7 ADC8 ADC9 BMCINT DDCCLK DDCDAT ESPI FWSPICS1 FWSPICS2 GPID0 GPID2 GPID4 -GPID6 GPIE0 GPIE2 GPIE4 GPIE6 I2C10 I2C11 I2C12 I2C13 I2C14 I2C3 I2C4 I2C5 I2C6 -I2C7 I2C8 I2C9 LAD0 LAD1 LAD2 LAD3 LCLK LFRAME LPCHC LPCPD LPCPLUS LPCPME -LPCRST LPCSMI LSIRQ MAC1LINK MAC2LINK MDIO1 MDIO2 NCTS1 NCTS2 NCTS3 NCTS4 NDCD1 -NDCD2 NDCD3 NDCD4 NDSR1 NDSR2 NDSR3 NDSR4 NDTR1 NDTR2 NDTR3 NDTR4 NRI1 NRI2 -NRI3 NRI4 NRTS1 NRTS2 NRTS3 NRTS4 OSCCLK PEWAKE PNOR PWM0 PWM1 PWM2 PWM3 PWM4 -PWM5 PWM6 PWM7 RGMII1 RGMII2 RMII1 RMII2 RXD1 RXD2 RXD3 RXD4 SALT1 SALT10 -SALT11 SALT12 SALT13 SALT14 SALT2 SALT3 SALT4 SALT5 SALT6 SALT7 SALT8 SALT9 -SCL1 SCL2 SD1 SD2 SDA1 SDA2 SGPS1 SGPS2 SIOONCTRL SIOPBI SIOPBO SIOPWREQ -SIOPWRGD SIOS3 SIOS5 SIOSCI SPI1 SPI1CS1 SPI1DEBUG SPI1PASSTHRU SPI2CK SPI2CS0 -SPI2CS1 SPI2MISO SPI2MOSI TIMER3 TIMER4 TIMER5 TIMER6 TIMER7 TIMER8 TXD1 TXD2 -TXD3 TXD4 UART6 USB11BHID USB2AD USB2AH USB2BD USB2BH USBCKI VGABIOSROM VGAHS -VGAVS VPI24 VPO WDTRST1 WDTRST2 - -Examples -======== - -g4 Example ----------- - -syscon: scu@1e6e2000 { - compatible = "aspeed,ast2400-scu", "syscon", "simple-mfd"; - reg = <0x1e6e2000 0x1a8>; - - pinctrl: pinctrl { - compatible = "aspeed,g4-pinctrl"; - - pinctrl_i2c3_default: i2c3_default { - function = "I2C3"; - groups = "I2C3"; - }; - - pinctrl_gpioh0_unbiased_default: gpioh0 { - pins = "A8"; - bias-disable; - }; - }; -}; - -g5 Example ----------- - -ahb { - apb { - syscon: scu@1e6e2000 { - compatible = "aspeed,ast2500-scu", "syscon", "simple-mfd"; - reg = <0x1e6e2000 0x1a8>; - - pinctrl: pinctrl { - compatible = "aspeed,g5-pinctrl"; - aspeed,external-nodes = <&gfx &lhc>; - - pinctrl_i2c3_default: i2c3_default { - function = "I2C3"; - groups = "I2C3"; - }; - - pinctrl_gpioh0_unbiased_default: gpioh0 { - pins = "A18"; - bias-disable; - }; - }; - }; - - gfx: display@1e6e6000 { - compatible = "aspeed,ast2500-gfx", "syscon"; - reg = <0x1e6e6000 0x1000>; - }; - }; - - lpc: lpc@1e789000 { - compatible = "aspeed,ast2500-lpc", "simple-mfd"; - reg = <0x1e789000 0x1000>; - - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x1e789000 0x1000>; - - lpc_host: lpc-host@80 { - compatible = "aspeed,ast2500-lpc-host", "simple-mfd", "syscon"; - reg = <0x80 0x1e0>; - reg-io-width = <4>; - - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x80 0x1e0>; - - lhc: lhc@20 { - compatible = "aspeed,ast2500-lhc"; - reg = <0x20 0x24 0x48 0x8>; - }; - }; - }; -}; diff --git a/dts/Bindings/pinctrl/pinctrl-bindings.txt b/dts/Bindings/pinctrl/pinctrl-bindings.txt index cef2b5855d..fcd37e93ed 100644 --- a/dts/Bindings/pinctrl/pinctrl-bindings.txt +++ b/dts/Bindings/pinctrl/pinctrl-bindings.txt @@ -258,6 +258,7 @@ drive-push-pull - drive actively high and low drive-open-drain - drive with open drain drive-open-source - drive with open source drive-strength - sink or source at most X mA +drive-strength-microamp - sink or source at most X uA input-enable - enable input on pin (no effect on output, such as enabling an input buffer) input-disable - disable input on pin (no effect on output, such as @@ -326,6 +327,8 @@ arguments are described below. - drive-strength takes as argument the target strength in mA. +- drive-strength-microamp takes as argument the target strength in uA. + - input-debounce takes the debounce time in usec as argument or 0 to disable debouncing diff --git a/dts/Bindings/pinctrl/qcom,apq8084-pinctrl.txt b/dts/Bindings/pinctrl/qcom,apq8084-pinctrl.txt index 68e93d5b7e..c9782397ff 100644 --- a/dts/Bindings/pinctrl/qcom,apq8084-pinctrl.txt +++ b/dts/Bindings/pinctrl/qcom,apq8084-pinctrl.txt @@ -122,17 +122,17 @@ to specify in a pin configuration subnode: - bias-disable: Usage: optional Value type: <none> - Definition: The specified pins should be configued as no pull. + Definition: The specified pins should be configured as no pull. - bias-pull-down: Usage: optional Value type: <none> - Definition: The specified pins should be configued as pull down. + Definition: The specified pins should be configured as pull down. - bias-pull-up: Usage: optional Value type: <none> - Definition: The specified pins should be configued as pull up. + Definition: The specified pins should be configured as pull up. - output-high: Usage: optional diff --git a/dts/Bindings/pinctrl/qcom,ipq8074-pinctrl.txt b/dts/Bindings/pinctrl/qcom,ipq8074-pinctrl.txt index 6dd72f8599..7b151894f5 100644 --- a/dts/Bindings/pinctrl/qcom,ipq8074-pinctrl.txt +++ b/dts/Bindings/pinctrl/qcom,ipq8074-pinctrl.txt @@ -118,17 +118,17 @@ to specify in a pin configuration subnode: - bias-disable: Usage: optional Value type: <none> - Definition: The specified pins should be configued as no pull. + Definition: The specified pins should be configured as no pull. - bias-pull-down: Usage: optional Value type: <none> - Definition: The specified pins should be configued as pull down. + Definition: The specified pins should be configured as pull down. - bias-pull-up: Usage: optional Value type: <none> - Definition: The specified pins should be configued as pull up. + Definition: The specified pins should be configured as pull up. - output-high: Usage: optional diff --git a/dts/Bindings/pinctrl/qcom,mdm9615-pinctrl.txt b/dts/Bindings/pinctrl/qcom,mdm9615-pinctrl.txt index 86ecdcfc4f..d469739688 100644 --- a/dts/Bindings/pinctrl/qcom,mdm9615-pinctrl.txt +++ b/dts/Bindings/pinctrl/qcom,mdm9615-pinctrl.txt @@ -97,17 +97,17 @@ to specify in a pin configuration subnode: - bias-disable: Usage: optional Value type: <none> - Definition: The specified pins should be configued as no pull. + Definition: The specified pins should be configured as no pull. - bias-pull-down: Usage: optional Value type: <none> - Definition: The specified pins should be configued as pull down. + Definition: The specified pins should be configured as pull down. - bias-pull-up: Usage: optional Value type: <none> - Definition: The specified pins should be configued as pull up. + Definition: The specified pins should be configured as pull up. - output-high: Usage: optional diff --git a/dts/Bindings/pinctrl/qcom,msm8916-pinctrl.txt b/dts/Bindings/pinctrl/qcom,msm8916-pinctrl.txt index 195a7a0ef0..3354a63296 100644 --- a/dts/Bindings/pinctrl/qcom,msm8916-pinctrl.txt +++ b/dts/Bindings/pinctrl/qcom,msm8916-pinctrl.txt @@ -130,17 +130,17 @@ to specify in a pin configuration subnode: - bias-disable: Usage: optional Value type: <none> - Definition: The specified pins should be configued as no pull. + Definition: The specified pins should be configured as no pull. - bias-pull-down: Usage: optional Value type: <none> - Definition: The specified pins should be configued as pull down. + Definition: The specified pins should be configured as pull down. - bias-pull-up: Usage: optional Value type: <none> - Definition: The specified pins should be configued as pull up. + Definition: The specified pins should be configured as pull up. - output-high: Usage: optional diff --git a/dts/Bindings/pinctrl/qcom,msm8960-pinctrl.txt b/dts/Bindings/pinctrl/qcom,msm8960-pinctrl.txt index 5034eb6653..a7dd213c77 100644 --- a/dts/Bindings/pinctrl/qcom,msm8960-pinctrl.txt +++ b/dts/Bindings/pinctrl/qcom,msm8960-pinctrl.txt @@ -124,17 +124,17 @@ to specify in a pin configuration subnode: - bias-disable: Usage: optional Value type: <none> - Definition: The specified pins should be configued as no pull. + Definition: The specified pins should be configured as no pull. - bias-pull-down: Usage: optional Value type: <none> - Definition: The specified pins should be configued as pull down. + Definition: The specified pins should be configured as pull down. - bias-pull-up: Usage: optional Value type: <none> - Definition: The specified pins should be configued as pull up. + Definition: The specified pins should be configured as pull up. - output-high: Usage: optional diff --git a/dts/Bindings/pinctrl/qcom,msm8994-pinctrl.txt b/dts/Bindings/pinctrl/qcom,msm8994-pinctrl.txt index f15443f6e7..da52df6273 100644 --- a/dts/Bindings/pinctrl/qcom,msm8994-pinctrl.txt +++ b/dts/Bindings/pinctrl/qcom,msm8994-pinctrl.txt @@ -128,17 +128,17 @@ to specify in a pin configuration subnode: - bias-disable: Usage: optional Value type: <none> - Definition: The specified pins should be configued as no pull. + Definition: The specified pins should be configured as no pull. - bias-pull-down: Usage: optional Value type: <none> - Definition: The specified pins should be configued as pull down. + Definition: The specified pins should be configured as pull down. - bias-pull-up: Usage: optional Value type: <none> - Definition: The specified pins should be configued as pull up. + Definition: The specified pins should be configured as pull up. - output-high: Usage: optional diff --git a/dts/Bindings/pinctrl/qcom,msm8996-pinctrl.txt b/dts/Bindings/pinctrl/qcom,msm8996-pinctrl.txt index fa97f609fe..a56cb88283 100644 --- a/dts/Bindings/pinctrl/qcom,msm8996-pinctrl.txt +++ b/dts/Bindings/pinctrl/qcom,msm8996-pinctrl.txt @@ -149,17 +149,17 @@ to specify in a pin configuration subnode: - bias-disable: Usage: optional Value type: <none> - Definition: The specified pins should be configued as no pull. + Definition: The specified pins should be configured as no pull. - bias-pull-down: Usage: optional Value type: <none> - Definition: The specified pins should be configued as pull down. + Definition: The specified pins should be configured as pull down. - bias-pull-up: Usage: optional Value type: <none> - Definition: The specified pins should be configued as pull up. + Definition: The specified pins should be configured as pull up. - output-high: Usage: optional diff --git a/dts/Bindings/pinctrl/qcom,msm8998-pinctrl.txt b/dts/Bindings/pinctrl/qcom,msm8998-pinctrl.txt index e70c79bbbc..cdec1eeb27 100644 --- a/dts/Bindings/pinctrl/qcom,msm8998-pinctrl.txt +++ b/dts/Bindings/pinctrl/qcom,msm8998-pinctrl.txt @@ -40,6 +40,14 @@ MSM8998 platform. Definition: must be 2. Specifying the pin number and flags, as defined in <dt-bindings/gpio/gpio.h> +- gpio-ranges: + Usage: required + Definition: see ../gpio/gpio.txt + +- gpio-reserved-ranges: + Usage: optional + Definition: see ../gpio/gpio.txt + Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for a general description of GPIO and interrupt bindings. @@ -135,17 +143,17 @@ to specify in a pin configuration subnode: - bias-disable: Usage: optional Value type: <none> - Definition: The specified pins should be configued as no pull. + Definition: The specified pins should be configured as no pull. - bias-pull-down: Usage: optional Value type: <none> - Definition: The specified pins should be configued as pull down. + Definition: The specified pins should be configured as pull down. - bias-pull-up: Usage: optional Value type: <none> - Definition: The specified pins should be configued as pull up. + Definition: The specified pins should be configured as pull up. - output-high: Usage: optional @@ -175,6 +183,8 @@ Example: interrupts = <0 208 0>; gpio-controller; #gpio-cells = <2>; + gpio-ranges = <&tlmm 0 0 175>; + gpio-reserved-ranges = <0 4>, <81 4>; interrupt-controller; #interrupt-cells = <2>; diff --git a/dts/Bindings/pinctrl/qcom,qcs404-pinctrl.txt b/dts/Bindings/pinctrl/qcom,qcs404-pinctrl.txt index 2b8f77762e..a50e746841 100644 --- a/dts/Bindings/pinctrl/qcom,qcs404-pinctrl.txt +++ b/dts/Bindings/pinctrl/qcom,qcs404-pinctrl.txt @@ -150,17 +150,17 @@ to specify in a pin configuration subnode: - bias-disable: Usage: optional Value type: <none> - Definition: The specified pins should be configued as no pull. + Definition: The specified pins should be configured as no pull. - bias-pull-down: Usage: optional Value type: <none> - Definition: The specified pins should be configued as pull down. + Definition: The specified pins should be configured as pull down. - bias-pull-up: Usage: optional Value type: <none> - Definition: The specified pins should be configued as pull up. + Definition: The specified pins should be configured as pull up. - output-high: Usage: optional diff --git a/dts/Bindings/pinctrl/qcom,sdm660-pinctrl.txt b/dts/Bindings/pinctrl/qcom,sdm660-pinctrl.txt index 769ca83bb4..be034d329e 100644 --- a/dts/Bindings/pinctrl/qcom,sdm660-pinctrl.txt +++ b/dts/Bindings/pinctrl/qcom,sdm660-pinctrl.txt @@ -142,17 +142,17 @@ to specify in a pin configuration subnode: - bias-disable: Usage: optional Value type: <none> - Definition: The specified pins should be configued as no pull. + Definition: The specified pins should be configured as no pull. - bias-pull-down: Usage: optional Value type: <none> - Definition: The specified pins should be configued as pull down. + Definition: The specified pins should be configured as pull down. - bias-pull-up: Usage: optional Value type: <none> - Definition: The specified pins should be configued as pull up. + Definition: The specified pins should be configured as pull up. - output-high: Usage: optional diff --git a/dts/Bindings/pinctrl/qcom,sdm845-pinctrl.txt b/dts/Bindings/pinctrl/qcom,sdm845-pinctrl.txt index 665aadb5ea..7462e3743c 100644 --- a/dts/Bindings/pinctrl/qcom,sdm845-pinctrl.txt +++ b/dts/Bindings/pinctrl/qcom,sdm845-pinctrl.txt @@ -79,7 +79,7 @@ to specify in a pin configuration subnode: gpio0-gpio149 Supports mux, bias and drive-strength - sdc2_clk, sdc2_cmd, sdc2_data + sdc2_clk, sdc2_cmd, sdc2_data, ufs_reset Supports bias and drive-strength - function: @@ -118,17 +118,17 @@ to specify in a pin configuration subnode: - bias-disable: Usage: optional Value type: <none> - Definition: The specified pins should be configued as no pull. + Definition: The specified pins should be configured as no pull. - bias-pull-down: Usage: optional Value type: <none> - Definition: The specified pins should be configued as pull down. + Definition: The specified pins should be configured as pull down. - bias-pull-up: Usage: optional Value type: <none> - Definition: The specified pins should be configued as pull up. + Definition: The specified pins should be configured as pull up. - output-high: Usage: optional diff --git a/dts/Bindings/pinctrl/qcom,sm8150-pinctrl.txt b/dts/Bindings/pinctrl/qcom,sm8150-pinctrl.txt new file mode 100644 index 0000000000..fa37733e51 --- /dev/null +++ b/dts/Bindings/pinctrl/qcom,sm8150-pinctrl.txt @@ -0,0 +1,190 @@ +Qualcomm SM8150 TLMM block + +This binding describes the Top Level Mode Multiplexer block found in the +QCS404 platform. + +- compatible: + Usage: required + Value type: <string> + Definition: must be "qcom,sm8150-pinctrl" + +- reg: + Usage: required + Value type: <prop-encoded-array> + Definition: the base address and size of the north, south, west + and east TLMM tiles. + +- reg-names: + Usage: required + Value type: <prop-encoded-array> + Defintiion: names for the cells of reg, must contain "north", "south" + "west" and "east". + +- interrupts: + Usage: required + Value type: <prop-encoded-array> + Definition: should specify the TLMM summary IRQ. + +- interrupt-controller: + Usage: required + Value type: <none> + Definition: identifies this node as an interrupt controller + +- #interrupt-cells: + Usage: required + Value type: <u32> + Definition: must be 2. Specifying the pin number and flags, as defined + in <dt-bindings/interrupt-controller/irq.h> + +- gpio-controller: + Usage: required + Value type: <none> + Definition: identifies this node as a gpio controller + +- #gpio-cells: + Usage: required + Value type: <u32> + Definition: must be 2. Specifying the pin number and flags, as defined + in <dt-bindings/gpio/gpio.h> + +- gpio-ranges: + Usage: required + Value type: <prop-encoded-array> + Definition: see ../gpio/gpio.txt + +- gpio-reserved-ranges: + Usage: optional + Value type: <prop-encoded-array> + Definition: see ../gpio/gpio.txt + +Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for +a general description of GPIO and interrupt bindings. + +Please refer to pinctrl-bindings.txt in this directory for details of the +common pinctrl bindings used by client devices, including the meaning of the +phrase "pin configuration node". + +The pin configuration nodes act as a container for an arbitrary number of +subnodes. Each of these subnodes represents some desired configuration for a +pin, a group, or a list of pins or groups. This configuration can include the +mux function to select on those pin(s)/group(s), and various pin configuration +parameters, such as pull-up, drive strength, etc. + + +PIN CONFIGURATION NODES: + +The name of each subnode is not important; all subnodes should be enumerated +and processed purely based on their content. + +Each subnode only affects those parameters that are explicitly listed. In +other words, a subnode that lists a mux function but no pin configuration +parameters implies no information about any pin configuration parameters. +Similarly, a pin subnode that describes a pullup parameter implies no +information about e.g. the mux function. + + +The following generic properties as defined in pinctrl-bindings.txt are valid +to specify in a pin configuration subnode: + +- pins: + Usage: required + Value type: <string-array> + Definition: List of gpio pins affected by the properties specified in + this subnode. + + Valid pins are: + gpio0-gpio149 + Supports mux, bias and drive-strength + + sdc1_clk, sdc1_cmd, sdc1_data sdc2_clk, sdc2_cmd, + sdc2_data sdc1_rclk + Supports bias and drive-strength + + ufs_reset + Supports bias and drive-strength + +- function: + Usage: required + Value type: <string> + Definition: Specify the alternative function to be configured for the + specified pins. Functions are only valid for gpio pins. + Valid values are: + + adsp_ext, agera_pll, aoss_cti, ddr_pxi2, atest_char, + atest_char0, atest_char1, atest_char2, atest_char3, + audio_ref, atest_usb1, atest_usb2, atest_usb10, + atest_usb11, atest_usb12, atest_usb13, atest_usb20, + atest_usb21, atest_usb22, atest_usb2, atest_usb23, + btfm_slimbus, cam_mclk, cci_async, cci_i2c, cci_timer0, + cci_timer1, cci_timer2, cci_timer3, cci_timer4, + cri_trng, cri_trng0, cri_trng1, dbg_out, ddr_bist, + ddr_pxi0, ddr_pxi1, ddr_pxi3, edp_hot, edp_lcd, + emac_phy, emac_pps, gcc_gp1, gcc_gp2, gcc_gp3, gpio, + hs1_mi2s, hs2_mi2s, hs3_mi2s, jitter_bist, + lpass_slimbus, mdp_vsync, mdp_vsync0, mdp_vsync1, + mdp_vsync2, mdp_vsync3, mss_lte, m_voc, nav_pps, + pa_indicator, pci_e0, phase_flag, pll_bypassnl, + pll_bist, pci_e1, pll_reset, pri_mi2s, pri_mi2s_ws, + prng_rosc, qdss, qdss_cti, qlink_request, qlink_enable, + qspi0, qspi1, qspi2, qspi3, qspi_clk, qspi_cs, qua_mi2s, + qup0, qup1, qup2, qup3, qup4, qup5, qup6, qup7, qup8, + qup9, qup10, qup11, qup12, qup13, qup14, qup15, qup16, + qup17, qup18, qup19, qup_l4, qup_l5, qup_l6, rgmii, + sdc4, sd_write, sec_mi2s, spkr_i2s, sp_cmu, ter_mi2s, + tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3, tsense_pwm1, + tsense_pwm2, tsif1, tsif2, uim1, uim2, uim_batt, + usb2phy_ac, usb_phy, vfr_1, vsense_trigger, wlan1_adc0, + wlan1_adc1, wlan2_adc0, wlan2_adc1, wmss_reset + +- bias-disable: + Usage: optional + Value type: <none> + Definition: The specified pins should be configued as no pull. + +- bias-pull-down: + Usage: optional + Value type: <none> + Definition: The specified pins should be configued as pull down. + +- bias-pull-up: + Usage: optional + Value type: <none> + Definition: The specified pins should be configued as pull up. + +- output-high: + Usage: optional + Value type: <none> + Definition: The specified pins are configured in output mode, driven + high. + Not valid for sdc pins. + +- output-low: + Usage: optional + Value type: <none> + Definition: The specified pins are configured in output mode, driven + low. + Not valid for sdc pins. + +- drive-strength: + Usage: optional + Value type: <u32> + Definition: Selects the drive strength for the specified pins, in mA. + Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16 + +Example: + + tlmm: pinctrl@3000000 { + compatible = "qcom,sm8150-pinctrl"; + reg = <0x03100000 0x300000>, + <0x03500000 0x300000>, + <0x03900000 0x300000>, + <0x03D00000 0x300000>; + reg-names = "west", "east", "north", "south"; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&tlmm 0 0 175>; + gpio-reserved-ranges = <0 4>, <126 4>; + interrupt-controller; + #interrupt-cells = <2>; + }; diff --git a/dts/Bindings/pinctrl/st,stm32-pinctrl.txt b/dts/Bindings/pinctrl/st,stm32-pinctrl.txt deleted file mode 100644 index 00169255e4..0000000000 --- a/dts/Bindings/pinctrl/st,stm32-pinctrl.txt +++ /dev/null @@ -1,208 +0,0 @@ -* STM32 GPIO and Pin Mux/Config controller - -STMicroelectronics's STM32 MCUs intregrate a GPIO and Pin mux/config hardware -controller. It controls the input/output settings on the available pins and -also provides ability to multiplex and configure the output of various on-chip -controllers onto these pads. - -Pin controller node: -Required properies: - - compatible: value should be one of the following: - "st,stm32f429-pinctrl" - "st,stm32f469-pinctrl" - "st,stm32f746-pinctrl" - "st,stm32f769-pinctrl" - "st,stm32h743-pinctrl" - "st,stm32mp157-pinctrl" - "st,stm32mp157-z-pinctrl" - - #address-cells: The value of this property must be 1 - - #size-cells : The value of this property must be 1 - - ranges : defines mapping between pin controller node (parent) to - gpio-bank node (children). - - pins-are-numbered: Specify the subnodes are using numbered pinmux to - specify pins. - -GPIO controller/bank node: -Required properties: - - gpio-controller : Indicates this device is a GPIO controller - - #gpio-cells : Should be two. - The first cell is the pin number - The second one is the polarity: - - 0 for active high - - 1 for active low - - reg : The gpio address range, relative to the pinctrl range - - clocks : clock that drives this bank - - st,bank-name : Should be a name string for this bank as specified in - the datasheet - -Optional properties: - - reset: : Reference to the reset controller - - st,syscfg: Should be phandle/offset/mask. - -The phandle to the syscon node which includes IRQ mux selection register. - -The offset of the IRQ mux selection register - -The field mask of IRQ mux, needed if different of 0xf. - - gpio-ranges: Define a dedicated mapping between a pin-controller and - a gpio controller. Format is <&phandle a b c> with: - -(phandle): phandle of pin-controller. - -(a): gpio base offset in range. - -(b): pin base offset in range. - -(c): gpio count in range - This entry has to be used either if there are holes inside a bank: - GPIOB0/B1/B2/B14/B15 (see example 2) - or if banks are not contiguous: - GPIOA/B/C/E... - NOTE: If "gpio-ranges" is used for a gpio controller, all gpio-controller - have to use a "gpio-ranges" entry. - More details in Documentation/devicetree/bindings/gpio/gpio.txt. - - st,bank-ioport: should correspond to the EXTI IOport selection (EXTI line - used to select GPIOs as interrupts). - - hwlocks: reference to a phandle of a hardware spinlock provider node. - - st,package: Indicates the SOC package used. - More details in include/dt-bindings/pinctrl/stm32-pinfunc.h - -Example 1: -#include <dt-bindings/pinctrl/stm32f429-pinfunc.h> -... - - pin-controller { - #address-cells = <1>; - #size-cells = <1>; - compatible = "st,stm32f429-pinctrl"; - ranges = <0 0x40020000 0x3000>; - pins-are-numbered; - - gpioa: gpio@40020000 { - gpio-controller; - #gpio-cells = <2>; - reg = <0x0 0x400>; - resets = <&reset_ahb1 0>; - st,bank-name = "GPIOA"; - }; - ... - pin-functions nodes follow... - }; - -Example 2: -#include <dt-bindings/pinctrl/stm32f429-pinfunc.h> -... - - pinctrl: pin-controller { - #address-cells = <1>; - #size-cells = <1>; - compatible = "st,stm32f429-pinctrl"; - ranges = <0 0x40020000 0x3000>; - pins-are-numbered; - - gpioa: gpio@40020000 { - gpio-controller; - #gpio-cells = <2>; - reg = <0x0 0x400>; - resets = <&reset_ahb1 0>; - st,bank-name = "GPIOA"; - gpio-ranges = <&pinctrl 0 0 16>; - }; - - gpiob: gpio@40020400 { - gpio-controller; - #gpio-cells = <2>; - reg = <0x0 0x400>; - resets = <&reset_ahb1 0>; - st,bank-name = "GPIOB"; - ngpios = 4; - gpio-ranges = <&pinctrl 0 16 3>, - <&pinctrl 14 30 2>; - }; - - - ... - pin-functions nodes follow... - }; - - -Contents of function subnode node: ----------------------------------- -Subnode format -A pinctrl node should contain at least one subnode representing the -pinctrl group available on the machine. Each subnode will list the -pins it needs, and how they should be configured, with regard to muxer -configuration, pullups, drive, output high/low and output speed. - - node { - pinmux = <PIN_NUMBER_PINMUX>; - GENERIC_PINCONFIG; - }; - -Required properties: -- pinmux: integer array, represents gpio pin number and mux setting. - Supported pin number and mux varies for different SoCs, and are defined in - dt-bindings/pinctrl/<soc>-pinfunc.h directly. - These defines are calculated as: - ((port * 16 + line) << 8) | function - With: - - port: The gpio port index (PA = 0, PB = 1, ..., PK = 11) - - line: The line offset within the port (PA0 = 0, PA1 = 1, ..., PA15 = 15) - - function: The function number, can be: - * 0 : GPIO - * 1 : Alternate Function 0 - * 2 : Alternate Function 1 - * 3 : Alternate Function 2 - * ... - * 16 : Alternate Function 15 - * 17 : Analog - - To simplify the usage, macro is available to generate "pinmux" field. - This macro is available here: - - include/dt-bindings/pinctrl/stm32-pinfunc.h - - Some examples of using macro: - /* GPIO A9 set as alernate function 2 */ - ... { - pinmux = <STM32_PINMUX('A', 9, AF2)>; - }; - /* GPIO A9 set as GPIO */ - ... { - pinmux = <STM32_PINMUX('A', 9, GPIO)>; - }; - /* GPIO A9 set as analog */ - ... { - pinmux = <STM32_PINMUX('A', 9, ANALOG)>; - }; - -Optional properties: -- GENERIC_PINCONFIG: is the generic pinconfig options to use. - Available options are: - - bias-disable, - - bias-pull-down, - - bias-pull-up, - - drive-push-pull, - - drive-open-drain, - - output-low - - output-high - - slew-rate = <x>, with x being: - < 0 > : Low speed - < 1 > : Medium speed - < 2 > : Fast speed - < 3 > : High speed - -Example: - -pin-controller { -... - usart1_pins_a: usart1@0 { - pins1 { - pinmux = <STM32_PINMUX('A', 9, AF7)>; - bias-disable; - drive-push-pull; - slew-rate = <0>; - }; - pins2 { - pinmux = <STM32_PINMUX('A', 10, AF7)>; - bias-disable; - }; - }; -}; - -&usart1 { - pinctrl-0 = <&usart1_pins_a>; - pinctrl-names = "default"; -}; diff --git a/dts/Bindings/pinctrl/st,stm32-pinctrl.yaml b/dts/Bindings/pinctrl/st,stm32-pinctrl.yaml new file mode 100644 index 0000000000..91d3e78b33 --- /dev/null +++ b/dts/Bindings/pinctrl/st,stm32-pinctrl.yaml @@ -0,0 +1,271 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright (C) STMicroelectronics 2019. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/st,stm32-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STM32 GPIO and Pin Mux/Config controller + +maintainers: + - Alexandre TORGUE <alexandre.torgue@st.com> + +description: | + STMicroelectronics's STM32 MCUs intregrate a GPIO and Pin mux/config hardware + controller. It controls the input/output settings on the available pins and + also provides ability to multiplex and configure the output of various + on-chip controllers onto these pads. + +properties: + compatible: + enum: + - st,stm32f429-pinctrl + - st,stm32f469-pinctrl + - st,stm32f746-pinctrl + - st,stm32f769-pinctrl + - st,stm32h743-pinctrl + - st,stm32mp157-pinctrl + - st,stm32mp157-z-pinctrl + + '#address-cells': + const: 1 + '#size-cells': + const: 1 + + ranges: true + pins-are-numbered: true + hwlocks: true + + st,syscfg: + $ref: "/schemas/types.yaml#/definitions/phandle-array" + description: Should be phandle/offset/mask + items: + - description: Phandle to the syscon node which includes IRQ mux selection. + - description: The offset of the IRQ mux selection register. + - description: The field mask of IRQ mux, needed if different of 0xf. + + st,package: + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - enum: [1, 2, 4, 8] + description: + Indicates the SOC package used. + More details in include/dt-bindings/pinctrl/stm32-pinfunc.h + + +patternProperties: + '^gpio@[0-9a-f]*$': + type: object + properties: + gpio-controller: true + '#gpio-cells': + const: 2 + + reg: + maxItems: 1 + clocks: + maxItems: 1 + reset: + minItems: 1 + maxItems: 1 + gpio-ranges: + minItems: 1 + maxItems: 16 + ngpios: + description: + Number of available gpios in a bank. + minimum: 1 + maximum: 16 + + st,bank-name: + allOf: + - $ref: "/schemas/types.yaml#/definitions/string" + - enum: + - GPIOA + - GPIOB + - GPIOC + - GPIOD + - GPIOE + - GPIOF + - GPIOG + - GPIOH + - GPIOI + - GPIOJ + - GPIOK + - GPIOZ + description: + Should be a name string for this bank as specified in the datasheet. + + st,bank-ioport: + allOf: + - $ref: "/schemas/types.yaml#/definitions/uint32" + - minimum: 0 + - maximum: 11 + + description: + Should correspond to the EXTI IOport selection (EXTI line used + to select GPIOs as interrupts). + + required: + - gpio-controller + - '#gpio-cells' + - reg + - clocks + - st,bank-name + + '-[0-9]*$': + type: object + patternProperties: + '^pins': + type: object + description: | + A pinctrl node should contain at least one subnode representing the + pinctrl group available on the machine. Each subnode will list the + pins it needs, and how they should be configured, with regard to muxer + configuration, pullups, drive, output high/low and output speed. + properties: + pinmux: + allOf: + - $ref: "/schemas/types.yaml#/definitions/uint32-array" + description: | + Integer array, represents gpio pin number and mux setting. + Supported pin number and mux varies for different SoCs, and are + defined in dt-bindings/pinctrl/<soc>-pinfunc.h directly. + These defines are calculated as: ((port * 16 + line) << 8) | function + With: + - port: The gpio port index (PA = 0, PB = 1, ..., PK = 11) + - line: The line offset within the port (PA0 = 0, PA1 = 1, ..., PA15 = 15) + - function: The function number, can be: + * 0 : GPIO + * 1 : Alternate Function 0 + * 2 : Alternate Function 1 + * 3 : Alternate Function 2 + * ... + * 16 : Alternate Function 15 + * 17 : Analog + To simplify the usage, macro is available to generate "pinmux" field. + This macro is available here: + - include/dt-bindings/pinctrl/stm32-pinfunc.h + Some examples of using macro: + /* GPIO A9 set as alernate function 2 */ + ... { + pinmux = <STM32_PINMUX('A', 9, AF2)>; + }; + /* GPIO A9 set as GPIO */ + ... { + pinmux = <STM32_PINMUX('A', 9, GPIO)>; + }; + /* GPIO A9 set as analog */ + ... { + pinmux = <STM32_PINMUX('A', 9, ANALOG)>; + }; + + bias-disable: + type: boolean + bias-pull-down: + type: boolean + bias-pull-up: + type: boolean + drive-push-pull: + type: boolean + drive-open-drain: + type: boolean + output-low: + type: boolean + output-high: + type: boolean + slew-rate: + description: | + 0: Low speed + 1: Medium speed + 2: Fast speed + 3: High speed + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - enum: [0, 1, 2, 3] + + required: + - pinmux + +required: + - compatible + - '#address-cells' + - '#size-cells' + - ranges + - pins-are-numbered + +examples: + - | + #include <dt-bindings/pinctrl/stm32-pinfunc.h> + #include <dt-bindings/mfd/stm32f4-rcc.h> + //Example 1 + pinctrl@40020000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,stm32f429-pinctrl"; + ranges = <0 0x40020000 0x3000>; + pins-are-numbered; + + gpioa: gpio@0 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x0 0x400>; + resets = <&reset_ahb1 0>; + clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOA)>; + st,bank-name = "GPIOA"; + }; + }; + + //Example 2 (using gpio-ranges) + pinctrl@50020000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,stm32f429-pinctrl"; + ranges = <0 0x50020000 0x3000>; + pins-are-numbered; + + gpiob: gpio@1000 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x1000 0x400>; + resets = <&reset_ahb1 0>; + clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOB)>; + st,bank-name = "GPIOB"; + gpio-ranges = <&pinctrl 0 0 16>; + }; + + gpioc: gpio@2000 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x2000 0x400>; + resets = <&reset_ahb1 0>; + clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOC)>; + st,bank-name = "GPIOC"; + ngpios = <5>; + gpio-ranges = <&pinctrl 0 16 3>, + <&pinctrl 14 30 2>; + }; + }; + + //Example 3 pin groups + pinctrl@60020000 { + usart1_pins_a: usart1-0 { + pins1 { + pinmux = <STM32_PINMUX('A', 9, AF7)>; + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32_PINMUX('A', 10, AF7)>; + bias-disable; + }; + }; + }; + + usart1 { + pinctrl-0 = <&usart1_pins_a>; + pinctrl-names = "default"; + }; + +... diff --git a/dts/Bindings/power/qcom,rpmpd.txt b/dts/Bindings/power/qcom,rpmpd.txt index 980e5413d1..eb35b22f9e 100644 --- a/dts/Bindings/power/qcom,rpmpd.txt +++ b/dts/Bindings/power/qcom,rpmpd.txt @@ -6,6 +6,8 @@ which then translates it into a corresponding voltage on a rail Required Properties: - compatible: Should be one of the following * qcom,msm8996-rpmpd: RPM Power domain for the msm8996 family of SoC + * qcom,msm8998-rpmpd: RPM Power domain for the msm8998 family of SoC + * qcom,qcs404-rpmpd: RPM Power domain for the qcs404 family of SoC * qcom,sdm845-rpmhpd: RPMh Power domain for the sdm845 family of SoC - #power-domain-cells: number of cells in Power domain specifier must be 1. diff --git a/dts/Bindings/power/reset/nvmem-reboot-mode.txt b/dts/Bindings/power/reset/nvmem-reboot-mode.txt new file mode 100644 index 0000000000..752d6126d5 --- /dev/null +++ b/dts/Bindings/power/reset/nvmem-reboot-mode.txt @@ -0,0 +1,26 @@ +NVMEM reboot mode driver + +This driver gets reboot mode magic value from reboot-mode driver +and stores it in a NVMEM cell named "reboot-mode". Then the bootloader +can read it and take different action according to the magic +value stored. + +Required properties: +- compatible: should be "nvmem-reboot-mode". +- nvmem-cells: A phandle to the reboot mode provided by a nvmem device. +- nvmem-cell-names: Should be "reboot-mode". + +The rest of the properties should follow the generic reboot-mode description +found in reboot-mode.txt + +Example: + reboot-mode { + compatible = "nvmem-reboot-mode"; + nvmem-cells = <&reboot_mode>; + nvmem-cell-names = "reboot-mode"; + + mode-normal = <0xAAAA5501>; + mode-bootloader = <0xBBBB5500>; + mode-recovery = <0xCCCC5502>; + mode-test = <0xDDDD5503>; + }; diff --git a/dts/Bindings/power/reset/qcom,pon.txt b/dts/Bindings/power/reset/qcom,pon.txt index 5705f57586..0c0dc3a1e6 100644 --- a/dts/Bindings/power/reset/qcom,pon.txt +++ b/dts/Bindings/power/reset/qcom,pon.txt @@ -9,6 +9,7 @@ Required Properties: -compatible: Must be one of: "qcom,pm8916-pon" "qcom,pms405-pon" + "qcom,pm8998-pon" -reg: Specifies the physical address of the pon register diff --git a/dts/Bindings/property-units.txt b/dts/Bindings/property-units.txt index bfd33734fa..e9b8360b32 100644 --- a/dts/Bindings/property-units.txt +++ b/dts/Bindings/property-units.txt @@ -12,32 +12,32 @@ unit prefixes. Time/Frequency ---------------------------------------- -mhz : megahertz --hz : Hertz (preferred) --sec : seconds --ms : milliseconds --us : microseconds --ns : nanoseconds +-hz : hertz (preferred) +-sec : second +-ms : millisecond +-us : microsecond +-ns : nanosecond Distance ---------------------------------------- --mm : millimeters +-mm : millimeter Electricity ---------------------------------------- --microamp : micro amps --microamp-hours : micro amp-hours --ohms : Ohms --micro-ohms : micro Ohms --microwatt-hours: micro Watt-hours --microvolt : micro volts --picofarads : picofarads --femtofarads : femtofarads +-microamp : microampere +-microamp-hours : microampere hour +-ohms : ohm +-micro-ohms : microohm +-microwatt-hours: microwatt hour +-microvolt : microvolt +-picofarads : picofarad +-femtofarads : femtofarad Temperature ---------------------------------------- --celsius : Degrees Celsius --millicelsius : Degreee milli-Celsius +-celsius : degree Celsius +-millicelsius : millidegree Celsius Pressure ---------------------------------------- --kpascal : kiloPascal +-kpascal : kilopascal diff --git a/dts/Bindings/ptp/ptp-qoriq.txt b/dts/Bindings/ptp/ptp-qoriq.txt index 454c937076..d48f9eb363 100644 --- a/dts/Bindings/ptp/ptp-qoriq.txt +++ b/dts/Bindings/ptp/ptp-qoriq.txt @@ -4,6 +4,8 @@ General Properties: - compatible Should be "fsl,etsec-ptp" for eTSEC Should be "fsl,fman-ptp-timer" for DPAA FMan + Should be "fsl,dpaa2-ptp" for DPAA2 + Should be "fsl,enetc-ptp" for ENETC - reg Offset and length of the register set for the device - interrupts There should be at least two interrupts. Some devices have as many as four PTP related interrupts. diff --git a/dts/Bindings/pwm/allwinner,sun4i-a10-pwm.yaml b/dts/Bindings/pwm/allwinner,sun4i-a10-pwm.yaml new file mode 100644 index 0000000000..0ac52f83a5 --- /dev/null +++ b/dts/Bindings/pwm/allwinner,sun4i-a10-pwm.yaml @@ -0,0 +1,57 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pwm/allwinner,sun4i-a10-pwm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A10 PWM Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <maxime.ripard@bootlin.com> + +properties: + "#pwm-cells": + const: 3 + + compatible: + oneOf: + - const: allwinner,sun4i-a10-pwm + - const: allwinner,sun5i-a10s-pwm + - const: allwinner,sun5i-a13-pwm + - const: allwinner,sun7i-a20-pwm + - const: allwinner,sun8i-h3-pwm + - items: + - const: allwinner,sun8i-a83t-pwm + - const: allwinner,sun8i-h3-pwm + - items: + - const: allwinner,sun50i-a64-pwm + - const: allwinner,sun5i-a13-pwm + - items: + - const: allwinner,sun50i-h5-pwm + - const: allwinner,sun5i-a13-pwm + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - "#pwm-cells" + - compatible + - reg + - clocks + +additionalProperties: false + +examples: + - | + pwm: pwm@1c20e00 { + compatible = "allwinner,sun7i-a20-pwm"; + reg = <0x01c20e00 0xc>; + clocks = <&osc24M>; + #pwm-cells = <3>; + }; + +... diff --git a/dts/Bindings/pwm/ingenic,jz47xx-pwm.txt b/dts/Bindings/pwm/ingenic,jz47xx-pwm.txt index 7d9d3f9064..493bec80d5 100644 --- a/dts/Bindings/pwm/ingenic,jz47xx-pwm.txt +++ b/dts/Bindings/pwm/ingenic,jz47xx-pwm.txt @@ -2,10 +2,7 @@ Ingenic JZ47xx PWM Controller ============================= Required properties: -- compatible: One of: - * "ingenic,jz4740-pwm" - * "ingenic,jz4770-pwm" - * "ingenic,jz4780-pwm" +- compatible: Should be "ingenic,jz4740-pwm" - #pwm-cells: Should be 3. See pwm.txt in this directory for a description of the cells format. - clocks : phandle to the external clock. diff --git a/dts/Bindings/pwm/pwm-sifive.txt b/dts/Bindings/pwm/pwm-sifive.txt new file mode 100644 index 0000000000..36447e3c93 --- /dev/null +++ b/dts/Bindings/pwm/pwm-sifive.txt @@ -0,0 +1,33 @@ +SiFive PWM controller + +Unlike most other PWM controllers, the SiFive PWM controller currently only +supports one period for all channels in the PWM. All PWMs need to run at +the same period. The period also has significant restrictions on the values +it can achieve, which the driver rounds to the nearest achievable period. +PWM RTL that corresponds to the IP block version numbers can be found +here: + +https://github.com/sifive/sifive-blocks/tree/master/src/main/scala/devices/pwm + +Required properties: +- compatible: Should be "sifive,<chip>-pwm" and "sifive,pwm<version>". + Supported compatible strings are: "sifive,fu540-c000-pwm" for the SiFive + PWM v0 as integrated onto the SiFive FU540 chip, and "sifive,pwm0" for the + SiFive PWM v0 IP block with no chip integration tweaks. + Please refer to sifive-blocks-ip-versioning.txt for details. +- reg: physical base address and length of the controller's registers +- clocks: Should contain a clock identifier for the PWM's parent clock. +- #pwm-cells: Should be 3. See pwm.txt in this directory + for a description of the cell format. +- interrupts: one interrupt per PWM channel + +Examples: + +pwm: pwm@10020000 { + compatible = "sifive,fu540-c000-pwm", "sifive,pwm0"; + reg = <0x0 0x10020000 0x0 0x1000>; + clocks = <&tlclk>; + interrupt-parent = <&plic>; + interrupts = <42 43 44 45>; + #pwm-cells = <3>; +}; diff --git a/dts/Bindings/pwm/pwm-stm32-lp.txt b/dts/Bindings/pwm/pwm-stm32-lp.txt index bd23302e84..6521bc44a7 100644 --- a/dts/Bindings/pwm/pwm-stm32-lp.txt +++ b/dts/Bindings/pwm/pwm-stm32-lp.txt @@ -11,8 +11,10 @@ Required parameters: bindings defined in pwm.txt. Optional properties: -- pinctrl-names: Set to "default". -- pinctrl-0: Phandle pointing to pin configuration node for PWM. +- pinctrl-names: Set to "default". An additional "sleep" state can be + defined to set pins in sleep state when in low power. +- pinctrl-n: Phandle(s) pointing to pin configuration node for PWM, + respectively for "default" and "sleep" states. Example: timer@40002400 { @@ -21,7 +23,8 @@ Example: pwm { compatible = "st,stm32-pwm-lp"; #pwm-cells = <3>; - pinctrl-names = "default"; + pinctrl-names = "default", "sleep"; pinctrl-0 = <&lppwm1_pins>; + pinctrl-1 = <&lppwm1_sleep_pins>; }; }; diff --git a/dts/Bindings/pwm/pwm-stm32.txt b/dts/Bindings/pwm/pwm-stm32.txt index 3e6d55018d..a8690bfa5e 100644 --- a/dts/Bindings/pwm/pwm-stm32.txt +++ b/dts/Bindings/pwm/pwm-stm32.txt @@ -8,6 +8,8 @@ Required parameters: - pinctrl-names: Set to "default". - pinctrl-0: List of phandles pointing to pin configuration nodes for PWM module. For Pinctrl properties see ../pinctrl/pinctrl-bindings.txt +- #pwm-cells: Should be set to 3. This PWM chip uses the default 3 cells + bindings defined in pwm.txt. Optional parameters: - st,breakinput: One or two <index level filter> to describe break input configurations. @@ -28,6 +30,7 @@ Example: pwm { compatible = "st,stm32-pwm"; + #pwm-cells = <3>; pinctrl-0 = <&pwm1_pins>; pinctrl-names = "default"; st,breakinput = <0 1 5>; diff --git a/dts/Bindings/pwm/pwm-sun4i.txt b/dts/Bindings/pwm/pwm-sun4i.txt deleted file mode 100644 index 2a1affbff4..0000000000 --- a/dts/Bindings/pwm/pwm-sun4i.txt +++ /dev/null @@ -1,24 +0,0 @@ -Allwinner sun4i and sun7i SoC PWM controller - -Required properties: - - compatible: should be one of: - - "allwinner,sun4i-a10-pwm" - - "allwinner,sun5i-a10s-pwm" - - "allwinner,sun5i-a13-pwm" - - "allwinner,sun7i-a20-pwm" - - "allwinner,sun8i-h3-pwm" - - "allwinner,sun50i-a64-pwm", "allwinner,sun5i-a13-pwm" - - "allwinner,sun50i-h5-pwm", "allwinner,sun5i-a13-pwm" - - reg: physical base address and length of the controller's registers - - #pwm-cells: should be 3. See pwm.txt in this directory for a description of - the cells format. - - clocks: From common clock binding, handle to the parent clock. - -Example: - - pwm: pwm@1c20e00 { - compatible = "allwinner,sun7i-a20-pwm"; - reg = <0x01c20e00 0xc>; - clocks = <&osc24M>; - #pwm-cells = <3>; - }; diff --git a/dts/Bindings/regulator/arizona-regulator.txt b/dts/Bindings/regulator/arizona-regulator.txt index 443564d778..69bf41949b 100644 --- a/dts/Bindings/regulator/arizona-regulator.txt +++ b/dts/Bindings/regulator/arizona-regulator.txt @@ -5,7 +5,8 @@ of analogue I/O. This document lists regulator specific bindings, see the primary binding document: - ../mfd/arizona.txt + For Wolfson Microelectronic Arizona codecs: ../mfd/arizona.txt + For Cirrus Logic Madera codecs: ../mfd/madera.txt Optional properties: - wlf,ldoena : GPIO specifier for the GPIO controlling LDOENA diff --git a/dts/Bindings/regulator/fixed-regulator.yaml b/dts/Bindings/regulator/fixed-regulator.yaml index d289c2f745..a650b45708 100644 --- a/dts/Bindings/regulator/fixed-regulator.yaml +++ b/dts/Bindings/regulator/fixed-regulator.yaml @@ -12,10 +12,13 @@ maintainers: description: Any property defined as part of the core regulator binding, defined in - regulator.txt, can also be used. However a fixed voltage regulator is + regulator.yaml, can also be used. However a fixed voltage regulator is expected to have the regulator-min-microvolt and regulator-max-microvolt to be the same. +allOf: + - $ref: "regulator.yaml#" + properties: compatible: const: regulator-fixed diff --git a/dts/Bindings/regulator/gpio-regulator.txt b/dts/Bindings/regulator/gpio-regulator.txt deleted file mode 100644 index dd25e73b5d..0000000000 --- a/dts/Bindings/regulator/gpio-regulator.txt +++ /dev/null @@ -1,57 +0,0 @@ -GPIO controlled regulators - -Required properties: -- compatible : Must be "regulator-gpio". -- regulator-name : Defined in regulator.txt as optional, but required - here. -- gpios : Array of one or more GPIO pins used to select the - regulator voltage/current listed in "states". -- states : Selection of available voltages/currents provided by - this regulator and matching GPIO configurations to - achieve them. If there are no states in the "states" - array, use a fixed regulator instead. - -Optional properties: -- enable-gpios : GPIO used to enable/disable the regulator. - Warning, the GPIO phandle flags are ignored and the - GPIO polarity is controlled solely by the presence - of "enable-active-high" DT property. This is due to - compatibility with old DTs. -- enable-active-high : Polarity of "enable-gpio" GPIO is active HIGH. - Default is active LOW. -- gpios-states : On operating systems, that don't support reading back - gpio values in output mode (most notably linux), this - array provides the state of GPIO pins set when - requesting them from the gpio controller. Systems, - that are capable of preserving state when requesting - the lines, are free to ignore this property. - 0: LOW, 1: HIGH. Default is LOW if nothing else - is specified. -- startup-delay-us : Startup time in microseconds. -- regulator-type : Specifies what is being regulated, must be either - "voltage" or "current", defaults to voltage. - -Any property defined as part of the core regulator binding defined in -regulator.txt can also be used. - -Example: - - mmciv: gpio-regulator { - compatible = "regulator-gpio"; - - regulator-name = "mmci-gpio-supply"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2600000>; - regulator-boot-on; - - enable-gpios = <&gpio0 23 0x4>; - gpios = <&gpio0 24 0x4 - &gpio0 25 0x4>; - states = <1800000 0x3 - 2200000 0x2 - 2600000 0x1 - 2900000 0x0>; - - startup-delay-us = <100000>; - enable-active-high; - }; diff --git a/dts/Bindings/regulator/gpio-regulator.yaml b/dts/Bindings/regulator/gpio-regulator.yaml new file mode 100644 index 0000000000..9d3b28417f --- /dev/null +++ b/dts/Bindings/regulator/gpio-regulator.yaml @@ -0,0 +1,118 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/gpio-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: GPIO controlled regulators + +maintainers: + - Liam Girdwood <lgirdwood@gmail.com> + - Mark Brown <broonie@kernel.org> + +description: + Any property defined as part of the core regulator binding, defined in + regulator.txt, can also be used. + +allOf: + - $ref: "regulator.yaml#" + +properties: + compatible: + const: regulator-gpio + + regulator-name: true + + enable-gpios: + description: GPIO to use to enable/disable the regulator. + Warning, the GPIO phandle flags are ignored and the GPIO polarity is + controlled solely by the presence of "enable-active-high" DT property. + This is due to compatibility with old DTs. + maxItems: 1 + + gpios: + description: Array of one or more GPIO pins used to select the regulator + voltage/current listed in "states". + minItems: 1 + maxItems: 8 # Should be enough... + + gpios-states: + description: | + On operating systems, that don't support reading back gpio values in + output mode (most notably linux), this array provides the state of GPIO + pins set when requesting them from the gpio controller. Systems, that are + capable of preserving state when requesting the lines, are free to ignore + this property. + 0: LOW + 1: HIGH + Default is LOW if nothing else is specified. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + - maxItems: 8 + items: + enum: [ 0, 1 ] + default: 0 + + states: + description: Selection of available voltages/currents provided by this + regulator and matching GPIO configurations to achieve them. If there are + no states in the "states" array, use a fixed regulator instead. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-matrix + - maxItems: 8 + items: + items: + - description: Voltage in microvolts + - description: GPIO group state value + + startup-delay-us: + description: startup time in microseconds + + enable-active-high: + description: Polarity of "enable-gpio" GPIO is active HIGH. Default is + active LOW. + type: boolean + + gpio-open-drain: + description: + GPIO is open drain type. If this property is missing then default + assumption is false. + type: boolean + + regulator-type: + description: Specifies what is being regulated. + allOf: + - $ref: /schemas/types.yaml#/definitions/string + - enum: + - voltage + - current + default: voltage + +required: + - compatible + - regulator-name + - gpios + - states + +examples: + - | + gpio-regulator { + compatible = "regulator-gpio"; + + regulator-name = "mmci-gpio-supply"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2600000>; + regulator-boot-on; + + enable-gpios = <&gpio0 23 0x4>; + gpios = <&gpio0 24 0x4 + &gpio0 25 0x4>; + states = <1800000 0x3>, + <2200000 0x2>, + <2600000 0x1>, + <2900000 0x0>; + + startup-delay-us = <100000>; + enable-active-high; + }; +... diff --git a/dts/Bindings/regulator/max8660.txt b/dts/Bindings/regulator/max8660.txt deleted file mode 100644 index 8ba994d8a1..0000000000 --- a/dts/Bindings/regulator/max8660.txt +++ /dev/null @@ -1,47 +0,0 @@ -Maxim MAX8660 voltage regulator - -Required properties: -- compatible: must be one of "maxim,max8660", "maxim,max8661" -- reg: I2C slave address, usually 0x34 -- any required generic properties defined in regulator.txt - -Example: - - i2c_master { - max8660@34 { - compatible = "maxim,max8660"; - reg = <0x34>; - - regulators { - regulator@0 { - regulator-compatible= "V3(DCDC)"; - regulator-min-microvolt = <725000>; - regulator-max-microvolt = <1800000>; - }; - - regulator@1 { - regulator-compatible= "V4(DCDC)"; - regulator-min-microvolt = <725000>; - regulator-max-microvolt = <1800000>; - }; - - regulator@2 { - regulator-compatible= "V5(LDO)"; - regulator-min-microvolt = <1700000>; - regulator-max-microvolt = <2000000>; - }; - - regulator@3 { - regulator-compatible= "V6(LDO)"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - regulator@4 { - regulator-compatible= "V7(LDO)"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - }; - }; - }; diff --git a/dts/Bindings/regulator/max8660.yaml b/dts/Bindings/regulator/max8660.yaml new file mode 100644 index 0000000000..9c038698f8 --- /dev/null +++ b/dts/Bindings/regulator/max8660.yaml @@ -0,0 +1,77 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/max8660.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim MAX8660 voltage regulator + +maintainers: + - Daniel Mack <zonque@gmail.com> + +properties: + $nodename: + pattern: "pmic@[0-9a-f]{1,2}" + compatible: + enum: + - maxim,max8660 + - maxim,max8661 + + reg: + maxItems: 1 + + regulators: + type: object + + patternProperties: + "regulator-.+": + $ref: "regulator.yaml#" + + additionalProperties: false + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@34 { + compatible = "maxim,max8660"; + reg = <0x34>; + + regulators { + regulator-V3 { + regulator-compatible= "V3(DCDC)"; + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <1800000>; + }; + + regulator-V4 { + regulator-compatible= "V4(DCDC)"; + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <1800000>; + }; + + regulator-V5 { + regulator-compatible= "V5(LDO)"; + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <2000000>; + }; + + regulator-V6 { + regulator-compatible= "V6(LDO)"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + regulator-V7 { + regulator-compatible= "V7(LDO)"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + }; + }; + }; +... diff --git a/dts/Bindings/regulator/pv88060.txt b/dts/Bindings/regulator/pv88060.txt index 10a6dadc00..6a7c8a92fd 100644 --- a/dts/Bindings/regulator/pv88060.txt +++ b/dts/Bindings/regulator/pv88060.txt @@ -121,4 +121,4 @@ Example regulator-max-microvolt = <5000000>; }; }; - };
\ No newline at end of file + }; diff --git a/dts/Bindings/regulator/qcom,rpmh-regulator.txt b/dts/Bindings/regulator/qcom,rpmh-regulator.txt index 7ef2dbe48e..14d2eee96b 100644 --- a/dts/Bindings/regulator/qcom,rpmh-regulator.txt +++ b/dts/Bindings/regulator/qcom,rpmh-regulator.txt @@ -97,7 +97,7 @@ Second Level Nodes - Regulators sent for this regulator including those which are for a strictly lower power state. -Other properties defined in Documentation/devicetree/bindings/regulator.txt +Other properties defined in Documentation/devicetree/bindings/regulator/regulator.txt may also be used. regulator-initial-mode and regulator-allowed-modes may be specified for VRM regulators using mode values from include/dt-bindings/regulator/qcom,rpmh-regulator.h. regulator-allow-bypass diff --git a/dts/Bindings/regulator/qcom,spmi-regulator.txt b/dts/Bindings/regulator/qcom,spmi-regulator.txt index 406f2e570c..430b8622bd 100644 --- a/dts/Bindings/regulator/qcom,spmi-regulator.txt +++ b/dts/Bindings/regulator/qcom,spmi-regulator.txt @@ -4,11 +4,13 @@ Qualcomm SPMI Regulators Usage: required Value type: <string> Definition: must be one of: + "qcom,pm8005-regulators" "qcom,pm8841-regulators" "qcom,pm8916-regulators" "qcom,pm8941-regulators" "qcom,pm8994-regulators" "qcom,pmi8994-regulators" + "qcom,pms405-regulators" - interrupts: Usage: optional @@ -110,6 +112,23 @@ Qualcomm SPMI Regulators Definition: Reference to regulator supplying the input pin, as described in the data sheet. +- vdd_l1_l2-supply: +- vdd_l3_l8-supply: +- vdd_l4-supply: +- vdd_l5_l6-supply: +- vdd_l10_l11_l12_l13-supply: +- vdd_l7-supply: +- vdd_l9-supply: +- vdd_s1-supply: +- vdd_s2-supply: +- vdd_s3-supply: +- vdd_s4-supply: +- vdd_s5-supply + Usage: optional (pms405 only) + Value type: <phandle> + Definition: Reference to regulator supplying the input pin, as + described in the data sheet. + - qcom,saw-reg: Usage: optional Value type: <phandle> @@ -120,6 +139,9 @@ The regulator node houses sub-nodes for each regulator within the device. Each sub-node is identified using the node's name, with valid values listed for each of the PMICs below. +pm8005: + s1, s2, s3, s4 + pm8841: s1, s2, s3, s4, s5, s6, s7, s8 diff --git a/dts/Bindings/regulator/regulator.txt b/dts/Bindings/regulator/regulator.txt index 0a3f087d58..487ccd8370 100644 --- a/dts/Bindings/regulator/regulator.txt +++ b/dts/Bindings/regulator/regulator.txt @@ -1,139 +1 @@ -Voltage/Current Regulators - -Optional properties: -- regulator-name: A string used as a descriptive name for regulator outputs -- regulator-min-microvolt: smallest voltage consumers may set -- regulator-max-microvolt: largest voltage consumers may set -- regulator-microvolt-offset: Offset applied to voltages to compensate for voltage drops -- regulator-min-microamp: smallest current consumers may set -- regulator-max-microamp: largest current consumers may set -- regulator-input-current-limit-microamp: maximum input current regulator allows -- regulator-always-on: boolean, regulator should never be disabled -- regulator-boot-on: bootloader/firmware enabled regulator -- regulator-allow-bypass: allow the regulator to go into bypass mode -- regulator-allow-set-load: allow the regulator performance level to be configured -- <name>-supply: phandle to the parent supply/regulator node -- regulator-ramp-delay: ramp delay for regulator(in uV/us) - For hardware which supports disabling ramp rate, it should be explicitly - initialised to zero (regulator-ramp-delay = <0>) for disabling ramp delay. -- regulator-enable-ramp-delay: The time taken, in microseconds, for the supply - rail to reach the target voltage, plus/minus whatever tolerance the board - design requires. This property describes the total system ramp time - required due to the combination of internal ramping of the regulator itself, - and board design issues such as trace capacitance and load on the supply. -- regulator-settling-time-us: Settling time, in microseconds, for voltage - change if regulator have the constant time for any level voltage change. - This is useful when regulator have exponential voltage change. -- regulator-settling-time-up-us: Settling time, in microseconds, for voltage - increase if the regulator needs a constant time to settle after voltage - increases of any level. This is useful for regulators with exponential - voltage changes. -- regulator-settling-time-down-us: Settling time, in microseconds, for voltage - decrease if the regulator needs a constant time to settle after voltage - decreases of any level. This is useful for regulators with exponential - voltage changes. -- regulator-soft-start: Enable soft start so that voltage ramps slowly -- regulator-state-standby sub-root node for Standby mode - : equivalent with standby Linux sleep state, which provides energy savings - with a relatively quick transition back time. -- regulator-state-mem sub-root node for Suspend-to-RAM mode - : suspend to memory, the device goes to sleep, but all data stored in memory, - only some external interrupt can wake the device. -- regulator-state-disk sub-root node for Suspend-to-DISK mode - : suspend to disk, this state operates similarly to Suspend-to-RAM, - but includes a final step of writing memory contents to disk. -- regulator-state-[mem/disk/standby] node has following common properties: - - regulator-on-in-suspend: regulator should be on in suspend state. - - regulator-off-in-suspend: regulator should be off in suspend state. - - regulator-suspend-min-microvolt: minimum voltage may be set in - suspend state. - - regulator-suspend-max-microvolt: maximum voltage may be set in - suspend state. - - regulator-suspend-microvolt: the default voltage which regulator - would be set in suspend. This property is now deprecated, instead - setting voltage for suspend mode via the API which regulator - driver provides is recommended. - - regulator-changeable-in-suspend: whether the default voltage and - the regulator on/off in suspend can be changed in runtime. - - regulator-mode: operating mode in the given suspend state. - The set of possible operating modes depends on the capabilities of - every hardware so the valid modes are documented on each regulator - device tree binding document. -- regulator-initial-mode: initial operating mode. The set of possible operating - modes depends on the capabilities of every hardware so each device binding - documentation explains which values the regulator supports. -- regulator-allowed-modes: list of operating modes that software is allowed to - configure for the regulator at run-time. Elements may be specified in any - order. The set of possible operating modes depends on the capabilities of - every hardware so each device binding document explains which values the - regulator supports. -- regulator-system-load: Load in uA present on regulator that is not captured by - any consumer request. -- regulator-pull-down: Enable pull down resistor when the regulator is disabled. -- regulator-over-current-protection: Enable over current protection. -- regulator-active-discharge: tristate, enable/disable active discharge of - regulators. The values are: - 0: Disable active discharge. - 1: Enable active discharge. - Absence of this property will leave configuration to default. -- regulator-coupled-with: Regulators with which the regulator - is coupled. The linkage is 2-way - all coupled regulators should be linked - with each other. A regulator should not be coupled with its supplier. -- regulator-coupled-max-spread: Array of maximum spread between voltages of - coupled regulators in microvolts, each value in the array relates to the - corresponding couple specified by the regulator-coupled-with property. -- regulator-max-step-microvolt: Maximum difference between current and target - voltages that can be changed safely in a single step. - -Deprecated properties: -- regulator-compatible: If a regulator chip contains multiple - regulators, and if the chip's binding contains a child node that - describes each regulator, then this property indicates which regulator - this child node is intended to configure. If this property is missing, - the node's name will be used instead. - -Example: - - xyzreg: regulator@0 { - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <2500000>; - regulator-always-on; - vin-supply = <&vin>; - - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - -Regulator Consumers: -Consumer nodes can reference one or more of its supplies/ -regulators using the below bindings. - -- <name>-supply: phandle to the regulator node - -These are the same bindings that a regulator in the above -example used to reference its own supply, in which case -its just seen as a special case of a regulator being a -consumer itself. - -Example of a consumer device node (mmc) referencing two -regulators (twl_reg1 and twl_reg2), - - twl_reg1: regulator@0 { - ... - ... - ... - }; - - twl_reg2: regulator@1 { - ... - ... - ... - }; - - mmc: mmc@0 { - ... - ... - vmmc-supply = <&twl_reg1>; - vmmcaux-supply = <&twl_reg2>; - }; +This file has moved to regulator.yaml. diff --git a/dts/Bindings/regulator/regulator.yaml b/dts/Bindings/regulator/regulator.yaml new file mode 100644 index 0000000000..02c3043ce4 --- /dev/null +++ b/dts/Bindings/regulator/regulator.yaml @@ -0,0 +1,200 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Voltage/Current Regulators + +maintainers: + - Liam Girdwood <lgirdwood@gmail.com> + - Mark Brown <broonie@kernel.org> + +properties: + regulator-name: + description: A string used as a descriptive name for regulator outputs + $ref: "/schemas/types.yaml#/definitions/string" + + regulator-min-microvolt: + description: smallest voltage consumers may set + + regulator-max-microvolt: + description: largest voltage consumers may set + + regulator-microvolt-offset: + description: Offset applied to voltages to compensate for voltage drops + + regulator-min-microamp: + description: smallest current consumers may set + + regulator-max-microamp: + description: largest current consumers may set + + regulator-input-current-limit-microamp: + description: maximum input current regulator allows + + regulator-always-on: + description: boolean, regulator should never be disabled + type: boolean + + regulator-boot-on: + description: bootloader/firmware enabled regulator + type: boolean + + regulator-allow-bypass: + description: allow the regulator to go into bypass mode + type: boolean + + regulator-allow-set-load: + description: allow the regulator performance level to be configured + type: boolean + + regulator-ramp-delay: + description: ramp delay for regulator(in uV/us) For hardware which supports + disabling ramp rate, it should be explicitly initialised to zero (regulator-ramp-delay + = <0>) for disabling ramp delay. + $ref: "/schemas/types.yaml#/definitions/uint32" + + regulator-enable-ramp-delay: + description: The time taken, in microseconds, for the supply rail to + reach the target voltage, plus/minus whatever tolerance the board + design requires. This property describes the total system ramp time + required due to the combination of internal ramping of the regulator + itself, and board design issues such as trace capacitance and load + on the supply. + $ref: "/schemas/types.yaml#/definitions/uint32" + + regulator-settling-time-us: + description: Settling time, in microseconds, for voltage change if regulator + have the constant time for any level voltage change. This is useful + when regulator have exponential voltage change. + + regulator-settling-time-up-us: + description: Settling time, in microseconds, for voltage increase if + the regulator needs a constant time to settle after voltage increases + of any level. This is useful for regulators with exponential voltage + changes. + + regulator-settling-time-down-us: + description: Settling time, in microseconds, for voltage decrease if + the regulator needs a constant time to settle after voltage decreases + of any level. This is useful for regulators with exponential voltage + changes. + + regulator-soft-start: + description: Enable soft start so that voltage ramps slowly + type: boolean + + regulator-initial-mode: + description: initial operating mode. The set of possible operating modes + depends on the capabilities of every hardware so each device binding + documentation explains which values the regulator supports. + $ref: "/schemas/types.yaml#/definitions/uint32" + + regulator-allowed-modes: + description: list of operating modes that software is allowed to configure + for the regulator at run-time. Elements may be specified in any order. + The set of possible operating modes depends on the capabilities of + every hardware so each device binding document explains which values + the regulator supports. + $ref: "/schemas/types.yaml#/definitions/uint32-array" + + regulator-system-load: + description: Load in uA present on regulator that is not captured by + any consumer request. + $ref: "/schemas/types.yaml#/definitions/uint32" + + regulator-pull-down: + description: Enable pull down resistor when the regulator is disabled. + type: boolean + + regulator-over-current-protection: + description: Enable over current protection. + type: boolean + + regulator-active-discharge: + description: | + tristate, enable/disable active discharge of regulators. The values are: + 0: Disable active discharge. + 1: Enable active discharge. + Absence of this property will leave configuration to default. + allOf: + - $ref: "/schemas/types.yaml#/definitions/uint32" + - enum: [ 0, 1 ] + + regulator-coupled-with: + description: Regulators with which the regulator is coupled. The linkage + is 2-way - all coupled regulators should be linked with each other. + A regulator should not be coupled with its supplier. + $ref: "/schemas/types.yaml#/definitions/phandle-array" + + regulator-coupled-max-spread: + description: Array of maximum spread between voltages of coupled regulators + in microvolts, each value in the array relates to the corresponding + couple specified by the regulator-coupled-with property. + $ref: "/schemas/types.yaml#/definitions/uint32" + + regulator-max-step-microvolt: + description: Maximum difference between current and target voltages + that can be changed safely in a single step. + +patternProperties: + ".*-supply$": + description: Input supply phandle(s) for this node + + regulator-state-(standby|mem|disk): + type: object + description: + sub-nodes for regulator state in Standby, Suspend-to-RAM, and + Suspend-to-DISK modes. Equivalent with standby, mem, and disk Linux + sleep states. + + properties: + regulator-on-in-suspend: + description: regulator should be on in suspend state. + type: boolean + + regulator-off-in-suspend: + description: regulator should be off in suspend state. + type: boolean + + regulator-suspend-min-microvolt: + description: minimum voltage may be set in suspend state. + + regulator-suspend-max-microvolt: + description: maximum voltage may be set in suspend state. + + regulator-suspend-microvolt: + description: the default voltage which regulator would be set in + suspend. This property is now deprecated, instead setting voltage + for suspend mode via the API which regulator driver provides is + recommended. + + regulator-changeable-in-suspend: + description: whether the default voltage and the regulator on/off + in suspend can be changed in runtime. + type: boolean + + regulator-mode: + description: operating mode in the given suspend state. The set + of possible operating modes depends on the capabilities of every + hardware so the valid modes are documented on each regulator device + tree binding document. + $ref: "/schemas/types.yaml#/definitions/uint32" + + additionalProperties: false + +examples: + - | + xyzreg: regulator@0 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + vin-supply = <&vin>; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + +... diff --git a/dts/Bindings/regulator/slg51000.txt b/dts/Bindings/regulator/slg51000.txt new file mode 100644 index 0000000000..aa0733e49b --- /dev/null +++ b/dts/Bindings/regulator/slg51000.txt @@ -0,0 +1,88 @@ +* Dialog Semiconductor SLG51000 Voltage Regulator + +Required properties: +- compatible : Should be "dlg,slg51000" for SLG51000 +- reg : Specifies the I2C slave address. +- xxx-supply: Input voltage supply regulator for ldo3 to ldo7. + These entries are required if regulators are enabled for a device. + An absence of these properties can cause the regulator registration to fail. + If some of input supply is powered through battery or always-on supply then + also it is required to have these parameters with proper node handle of always + on power supply. + vin3-supply: Input supply for ldo3 + vin4-supply: Input supply for ldo4 + vin5-supply: Input supply for ldo5 + vin6-supply: Input supply for ldo6 + vin7-supply: Input supply for ldo7 + +Optional properties: +- interrupt-parent : Specifies the reference to the interrupt controller. +- interrupts : IRQ line information. +- dlg,cs-gpios : Specify a valid GPIO for chip select + +Sub-nodes: +- regulators : This node defines the settings for the regulators. + The content of the sub-node is defined by the standard binding + for regulators; see regulator.txt. + + The SLG51000 regulators are bound using their names listed below: + ldo1 + ldo2 + ldo3 + ldo4 + ldo5 + ldo6 + ldo7 + +Optional properties for regulators: +- enable-gpios : Specify a valid GPIO for platform control of the regulator. + +Example: + pmic: slg51000@75 { + compatible = "dlg,slg51000"; + reg = <0x75>; + + regulators { + ldo1 { + regulator-name = "ldo1"; + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <3300000>; + }; + + ldo2 { + regulator-name = "ldo2"; + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <3300000>; + }; + + ldo3 { + regulator-name = "ldo3"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3750000>; + }; + + ldo4 { + regulator-name = "ldo4"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3750000>; + }; + + ldo5 { + regulator-name = "ldo5"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1200000>; + }; + + ldo6 { + regulator-name = "ldo6"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1200000>; + }; + + ldo7 { + regulator-name = "ldo7"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3750000>; + }; + }; + }; diff --git a/dts/Bindings/regulator/st,stm32-booster.txt b/dts/Bindings/regulator/st,stm32-booster.txt new file mode 100644 index 0000000000..479ad4c875 --- /dev/null +++ b/dts/Bindings/regulator/st,stm32-booster.txt @@ -0,0 +1,18 @@ +STM32 BOOSTER - Booster for ADC analog input switches + +Some STM32 devices embed a 3.3V booster supplied by Vdda, that can be used +to supply ADC analog input switches. + +Required properties: +- compatible: Should be one of: + "st,stm32h7-booster" + "st,stm32mp1-booster" +- st,syscfg: Phandle to system configuration controller. +- vdda-supply: Phandle to the vdda input analog voltage. + +Example: + booster: regulator-booster { + compatible = "st,stm32mp1-booster"; + st,syscfg = <&syscfg>; + vdda-supply = <&vdda>; + }; diff --git a/dts/Bindings/remoteproc/qcom,adsp-pil.txt b/dts/Bindings/remoteproc/qcom,hexagon-v56.txt index 66af2c3094..1337a3d93d 100644 --- a/dts/Bindings/remoteproc/qcom,adsp-pil.txt +++ b/dts/Bindings/remoteproc/qcom,hexagon-v56.txt @@ -1,12 +1,13 @@ -Qualcomm Technology Inc. ADSP Peripheral Image Loader +Qualcomm Technology Inc. Hexagon v56 Peripheral Image Loader This document defines the binding for a component that loads and boots firmware -on the Qualcomm Technology Inc. ADSP Hexagon core. +on the Qualcomm Technology Inc. Hexagon v56 core. - compatible: Usage: required Value type: <string> Definition: must be one of: + "qcom,qcs404-cdsp-pil", "qcom,sdm845-adsp-pil" - reg: @@ -28,10 +29,11 @@ on the Qualcomm Technology Inc. ADSP Hexagon core. - clocks: Usage: required Value type: <prop-encoded-array> - Definition: List of 8 phandle and clock specifier pairs for the adsp. + Definition: List of phandles and clock specifier pairs for the Hexagon, + per clock-names below. - clock-names: - Usage: required + Usage: required for SDM845 ADSP Value type: <stringlist> Definition: List of clock input name strings sorted in the same order as the clocks property. Definition must have @@ -39,6 +41,14 @@ on the Qualcomm Technology Inc. ADSP Hexagon core. "lpass_ahbm_aon_cbcr", "qdsp6ss_xo", "qdsp6ss_sleep" and "qdsp6ss_core". +- clock-names: + Usage: required for QCS404 CDSP + Value type: <stringlist> + Definition: List of clock input name strings sorted in the same + order as the clocks property. Definition must have + "xo", "sway", "tbu", "bimc", "ahb_aon", "q6ss_slave", + "q6ss_master", "q6_axim". + - power-domains: Usage: required Value type: <phandle> @@ -47,28 +57,33 @@ on the Qualcomm Technology Inc. ADSP Hexagon core. - resets: Usage: required Value type: <phandle> - Definition: reference to the list of 2 reset-controller for the adsp. + Definition: reference to the list of resets for the Hexagon. - reset-names: - Usage: required + Usage: required for SDM845 ADSP Value type: <stringlist> Definition: must be "pdc_sync" and "cc_lpass" +- reset-names: + Usage: required for QCS404 CDSP + Value type: <stringlist> + Definition: must be "restart" + - qcom,halt-regs: Usage: required Value type: <prop-encoded-array> Definition: a phandle reference to a syscon representing TCSR followed - by the offset within syscon for lpass halt register. + by the offset within syscon for Hexagon halt register. - memory-region: Usage: required Value type: <phandle> - Definition: reference to the reserved-memory for the ADSP + Definition: reference to the reserved-memory for the firmware - qcom,smem-states: Usage: required Value type: <phandle> - Definition: reference to the smem state for requesting the ADSP to + Definition: reference to the smem state for requesting the Hexagon to shut down - qcom,smem-state-names: @@ -79,7 +94,7 @@ on the Qualcomm Technology Inc. ADSP Hexagon core. = SUBNODES The adsp node may have an subnode named "glink-edge" that describes the -communication edge, channels and devices related to the ADSP. +communication edge, channels and devices related to the Hexagon. See ../soc/qcom/qcom,glink.txt for details on how to describe these. = EXAMPLE diff --git a/dts/Bindings/remoteproc/stm32-rproc.txt b/dts/Bindings/remoteproc/stm32-rproc.txt new file mode 100644 index 0000000000..5fa915a4b7 --- /dev/null +++ b/dts/Bindings/remoteproc/stm32-rproc.txt @@ -0,0 +1,63 @@ +STMicroelectronics STM32 Remoteproc +----------------------------------- +This document defines the binding for the remoteproc component that loads and +boots firmwares on the ST32MP family chipset. + +Required properties: +- compatible: Must be "st,stm32mp1-m4" +- reg: Address ranges of the RETRAM and MCU SRAM memories used by the + remote processor. +- resets: Reference to a reset controller asserting the remote processor. +- st,syscfg-holdboot: Reference to the system configuration which holds the + remote processor reset hold boot + 1st cell: phandle of syscon block + 2nd cell: register offset containing the hold boot setting + 3rd cell: register bitmask for the hold boot field +- st,syscfg-tz: Reference to the system configuration which holds the RCC trust + zone mode + 1st cell: phandle to syscon block + 2nd cell: register offset containing the RCC trust zone mode setting + 3rd cell: register bitmask for the RCC trust zone mode bit + +Optional properties: +- interrupts: Should contain the watchdog interrupt +- mboxes: This property is required only if the rpmsg/virtio functionality + is used. List of phandle and mailbox channel specifiers: + - a channel (a) used to communicate through virtqueues with the + remote proc. + Bi-directional channel: + - from local to remote = send message + - from remote to local = send message ack + - a channel (b) working the opposite direction of channel (a) + - a channel (c) used by the local proc to notify the remote proc + that it is about to be shut down. + Unidirectional channel: + - from local to remote, where ACK from the remote means + that it is ready for shutdown +- mbox-names: This property is required if the mboxes property is used. + - must be "vq0" for channel (a) + - must be "vq1" for channel (b) + - must be "shutdown" for channel (c) +- memory-region: List of phandles to the reserved memory regions associated with + the remoteproc device. This is variable and describes the + memories shared with the remote processor (eg: remoteproc + firmware and carveouts, rpmsg vrings, ...). + (see ../reserved-memory/reserved-memory.txt) +- st,syscfg-pdds: Reference to the system configuration which holds the remote + processor deep sleep setting + 1st cell: phandle to syscon block + 2nd cell: register offset containing the deep sleep setting + 3rd cell: register bitmask for the deep sleep bit +- st,auto-boot: If defined, when remoteproc is probed, it loads the default + firmware and starts the remote processor. + +Example: + m4_rproc: m4@10000000 { + compatible = "st,stm32mp1-m4"; + reg = <0x10000000 0x40000>, + <0x30000000 0x40000>, + <0x38000000 0x10000>; + resets = <&rcc MCU_R>; + st,syscfg-holdboot = <&rcc 0x10C 0x1>; + st,syscfg-tz = <&rcc 0x000 0x1>; + }; diff --git a/dts/Bindings/reset/bitmain,bm1880-reset.txt b/dts/Bindings/reset/bitmain,bm1880-reset.txt new file mode 100644 index 0000000000..a6f8455ae6 --- /dev/null +++ b/dts/Bindings/reset/bitmain,bm1880-reset.txt @@ -0,0 +1,18 @@ +Bitmain BM1880 SoC Reset Controller +=================================== + +Please also refer to reset.txt in this directory for common reset +controller binding usage. + +Required properties: +- compatible: Should be "bitmain,bm1880-reset" +- reg: Offset and length of reset controller space in SCTRL. +- #reset-cells: Must be 1. + +Example: + + rst: reset-controller@c00 { + compatible = "bitmain,bm1880-reset"; + reg = <0xc00 0x8>; + #reset-cells = <1>; + }; diff --git a/dts/Bindings/reset/fsl,imx7-src.txt b/dts/Bindings/reset/fsl,imx7-src.txt index 2ecf33815d..13e095182d 100644 --- a/dts/Bindings/reset/fsl,imx7-src.txt +++ b/dts/Bindings/reset/fsl,imx7-src.txt @@ -45,6 +45,6 @@ Example: }; -For list of all valid reset indicies see +For list of all valid reset indices see <dt-bindings/reset/imx7-reset.h> for i.MX7 and <dt-bindings/reset/imx8mq-reset.h> for i.MX8MQ diff --git a/dts/Bindings/riscv/cpus.txt b/dts/Bindings/riscv/cpus.txt deleted file mode 100644 index adf7b7af5d..0000000000 --- a/dts/Bindings/riscv/cpus.txt +++ /dev/null @@ -1,162 +0,0 @@ -=================== -RISC-V CPU Bindings -=================== - -The device tree allows to describe the layout of CPUs in a system through -the "cpus" node, which in turn contains a number of subnodes (ie "cpu") -defining properties for every cpu. - -Bindings for CPU nodes follow the Devicetree Specification, available from: - -https://www.devicetree.org/specifications/ - -with updates for 32-bit and 64-bit RISC-V systems provided in this document. - -=========== -Terminology -=========== - -This document uses some terminology common to the RISC-V community that is not -widely used, the definitions of which are listed here: - -* hart: A hardware execution context, which contains all the state mandated by - the RISC-V ISA: a PC and some registers. This terminology is designed to - disambiguate software's view of execution contexts from any particular - microarchitectural implementation strategy. For example, my Intel laptop is - described as having one socket with two cores, each of which has two hyper - threads. Therefore this system has four harts. - -===================================== -cpus and cpu node bindings definition -===================================== - -The RISC-V architecture, in accordance with the Devicetree Specification, -requires the cpus and cpu nodes to be present and contain the properties -described below. - -- cpus node - - Description: Container of cpu nodes - - The node name must be "cpus". - - A cpus node must define the following properties: - - - #address-cells - Usage: required - Value type: <u32> - Definition: must be set to 1 - - #size-cells - Usage: required - Value type: <u32> - Definition: must be set to 0 - -- cpu node - - Description: Describes a hart context - - PROPERTIES - - - device_type - Usage: required - Value type: <string> - Definition: must be "cpu" - - reg - Usage: required - Value type: <u32> - Definition: The hart ID of this CPU node - - compatible: - Usage: required - Value type: <stringlist> - Definition: must contain "riscv", may contain one of - "sifive,rocket0" - - mmu-type: - Usage: optional - Value type: <string> - Definition: Specifies the CPU's MMU type. Possible values are - "riscv,sv32" - "riscv,sv39" - "riscv,sv48" - - riscv,isa: - Usage: required - Value type: <string> - Definition: Contains the RISC-V ISA string of this hart. These - ISA strings are defined by the RISC-V ISA manual. - -Example: SiFive Freedom U540G Development Kit ---------------------------------------------- - -This system contains two harts: a hart marked as disabled that's used for -low-level system tasks and should be ignored by Linux, and a second hart that -Linux is allowed to run on. - - cpus { - #address-cells = <1>; - #size-cells = <0>; - timebase-frequency = <1000000>; - cpu@0 { - clock-frequency = <1600000000>; - compatible = "sifive,rocket0", "riscv"; - device_type = "cpu"; - i-cache-block-size = <64>; - i-cache-sets = <128>; - i-cache-size = <16384>; - next-level-cache = <&L15 &L0>; - reg = <0>; - riscv,isa = "rv64imac"; - status = "disabled"; - L10: interrupt-controller { - #interrupt-cells = <1>; - compatible = "riscv,cpu-intc"; - interrupt-controller; - }; - }; - cpu@1 { - clock-frequency = <1600000000>; - compatible = "sifive,rocket0", "riscv"; - d-cache-block-size = <64>; - d-cache-sets = <64>; - d-cache-size = <32768>; - d-tlb-sets = <1>; - d-tlb-size = <32>; - device_type = "cpu"; - i-cache-block-size = <64>; - i-cache-sets = <64>; - i-cache-size = <32768>; - i-tlb-sets = <1>; - i-tlb-size = <32>; - mmu-type = "riscv,sv39"; - next-level-cache = <&L15 &L0>; - reg = <1>; - riscv,isa = "rv64imafdc"; - status = "okay"; - tlb-split; - L13: interrupt-controller { - #interrupt-cells = <1>; - compatible = "riscv,cpu-intc"; - interrupt-controller; - }; - }; - }; - -Example: Spike ISA Simulator with 1 Hart ----------------------------------------- - -This device tree matches the Spike ISA golden model as run with `spike -p1`. - - cpus { - cpu@0 { - device_type = "cpu"; - reg = <0x00000000>; - status = "okay"; - compatible = "riscv"; - riscv,isa = "rv64imafdc"; - mmu-type = "riscv,sv48"; - clock-frequency = <0x3b9aca00>; - interrupt-controller { - #interrupt-cells = <0x00000001>; - interrupt-controller; - compatible = "riscv,cpu-intc"; - } - } - } diff --git a/dts/Bindings/riscv/cpus.yaml b/dts/Bindings/riscv/cpus.yaml index 27f02ec4bb..b261a3015f 100644 --- a/dts/Bindings/riscv/cpus.yaml +++ b/dts/Bindings/riscv/cpus.yaml @@ -10,97 +10,92 @@ maintainers: - Paul Walmsley <paul.walmsley@sifive.com> - Palmer Dabbelt <palmer@sifive.com> -allOf: - - $ref: /schemas/cpus.yaml# +description: | + This document uses some terminology common to the RISC-V community + that is not widely used, the definitions of which are listed here: + + hart: A hardware execution context, which contains all the state + mandated by the RISC-V ISA: a PC and some registers. This + terminology is designed to disambiguate software's view of execution + contexts from any particular microarchitectural implementation + strategy. For example, an Intel laptop containing one socket with + two cores, each of which has two hyperthreads, could be described as + having four harts. properties: - $nodename: - const: cpus - description: Container of cpu nodes - - '#address-cells': - const: 1 - description: | - A single unsigned 32-bit integer uniquely identifies each RISC-V - hart in a system. (See the "reg" node under the "cpu" node, - below). - - '#size-cells': - const: 0 - -patternProperties: - '^cpu@[0-9a-f]+$': + compatible: + items: + - enum: + - sifive,rocket0 + - sifive,e5 + - sifive,e51 + - sifive,u54-mc + - sifive,u54 + - sifive,u5 + - const: riscv + description: + Identifies that the hart uses the RISC-V instruction set + and identifies the type of the hart. + + mmu-type: + allOf: + - $ref: "/schemas/types.yaml#/definitions/string" + - enum: + - riscv,sv32 + - riscv,sv39 + - riscv,sv48 + description: + Identifies the MMU address translation mode used on this + hart. These values originate from the RISC-V Privileged + Specification document, available from + https://riscv.org/specifications/ + + riscv,isa: + allOf: + - $ref: "/schemas/types.yaml#/definitions/string" + - enum: + - rv64imac + - rv64imafdc + description: + Identifies the specific RISC-V instruction set architecture + supported by the hart. These are documented in the RISC-V + User-Level ISA document, available from + https://riscv.org/specifications/ + + While the isa strings in ISA specification are case + insensitive, letters in the riscv,isa string must be all + lowercase to simplify parsing. + + timebase-frequency: + type: integer + minimum: 1 + description: + Specifies the clock frequency of the system timer in Hz. + This value is common to all harts on a single system image. + + interrupt-controller: + type: object + description: Describes the CPU's local interrupt controller + properties: + '#interrupt-cells': + const: 1 + compatible: - type: array - items: - - enum: - - sifive,rocket0 - - sifive,e5 - - sifive,e51 - - sifive,u54-mc - - sifive,u54 - - sifive,u5 - - const: riscv - description: - Identifies that the hart uses the RISC-V instruction set - and identifies the type of the hart. - - mmu-type: - allOf: - - $ref: "/schemas/types.yaml#/definitions/string" - - enum: - - riscv,sv32 - - riscv,sv39 - - riscv,sv48 - description: - Identifies the MMU address translation mode used on this - hart. These values originate from the RISC-V Privileged - Specification document, available from - https://riscv.org/specifications/ - - riscv,isa: - allOf: - - $ref: "/schemas/types.yaml#/definitions/string" - - enum: - - rv64imac - - rv64imafdc - description: - Identifies the specific RISC-V instruction set architecture - supported by the hart. These are documented in the RISC-V - User-Level ISA document, available from - https://riscv.org/specifications/ - - timebase-frequency: - type: integer - minimum: 1 - description: - Specifies the clock frequency of the system timer in Hz. - This value is common to all harts on a single system image. - - interrupt-controller: - type: object - description: Describes the CPU's local interrupt controller - - properties: - '#interrupt-cells': - const: 1 - - compatible: - const: riscv,cpu-intc - - interrupt-controller: true - - required: - - '#interrupt-cells' - - compatible - - interrupt-controller + const: riscv,cpu-intc + + interrupt-controller: true required: - - riscv,isa - - timebase-frequency + - '#interrupt-cells' + - compatible - interrupt-controller +required: + - riscv,isa + - timebase-frequency + - interrupt-controller + examples: - | // Example 1: SiFive Freedom U540G Development Kit @@ -152,17 +147,19 @@ examples: - | // Example 2: Spike ISA Simulator with 1 Hart cpus { - cpu@0 { - device_type = "cpu"; - reg = <0>; - compatible = "riscv"; - riscv,isa = "rv64imafdc"; - mmu-type = "riscv,sv48"; - interrupt-controller { - #interrupt-cells = <1>; - interrupt-controller; - compatible = "riscv,cpu-intc"; - }; - }; + #address-cells = <1>; + #size-cells = <0>; + cpu@0 { + device_type = "cpu"; + reg = <0>; + compatible = "riscv"; + riscv,isa = "rv64imafdc"; + mmu-type = "riscv,sv48"; + interrupt-controller { + #interrupt-cells = <1>; + interrupt-controller; + compatible = "riscv,cpu-intc"; + }; + }; }; ... diff --git a/dts/Bindings/riscv/sifive.yaml b/dts/Bindings/riscv/sifive.yaml index 9d17dc2f3f..3ab532713d 100644 --- a/dts/Bindings/riscv/sifive.yaml +++ b/dts/Bindings/riscv/sifive.yaml @@ -19,7 +19,7 @@ properties: compatible: items: - enum: - - sifive,freedom-unleashed-a00 + - sifive,hifive-unleashed-a00 - const: sifive,fu540-c000 - const: sifive,fu540 ... diff --git a/dts/Bindings/rng/brcm,iproc-rng200.txt b/dts/Bindings/rng/brcm,iproc-rng200.txt index 0014da9145..c223e54452 100644 --- a/dts/Bindings/rng/brcm,iproc-rng200.txt +++ b/dts/Bindings/rng/brcm,iproc-rng200.txt @@ -2,6 +2,7 @@ HWRNG support for the iproc-rng200 driver Required properties: - compatible : Must be one of: + "brcm,bcm7211-rng200" "brcm,bcm7278-rng200" "brcm,iproc-rng200" - reg : base address and size of control register block diff --git a/dts/Bindings/rtc/allwinner,sun4i-a10-rtc.yaml b/dts/Bindings/rtc/allwinner,sun4i-a10-rtc.yaml new file mode 100644 index 0000000000..46d69c32b8 --- /dev/null +++ b/dts/Bindings/rtc/allwinner,sun4i-a10-rtc.yaml @@ -0,0 +1,43 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/rtc/allwinner,sun4i-a10-rtc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A10 RTC Device Tree Bindings + +allOf: + - $ref: "rtc.yaml#" + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <maxime.ripard@bootlin.com> + +properties: + compatible: + enum: + - allwinner,sun4i-a10-rtc + - allwinner,sun7i-a20-rtc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + rtc: rtc@1c20d00 { + compatible = "allwinner,sun4i-a10-rtc"; + reg = <0x01c20d00 0x20>; + interrupts = <24>; + }; + +... diff --git a/dts/Bindings/rtc/allwinner,sun6i-a31-rtc.yaml b/dts/Bindings/rtc/allwinner,sun6i-a31-rtc.yaml new file mode 100644 index 0000000000..924622f39c --- /dev/null +++ b/dts/Bindings/rtc/allwinner,sun6i-a31-rtc.yaml @@ -0,0 +1,134 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/rtc/allwinner,sun6i-a31-rtc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A31 RTC Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <maxime.ripard@bootlin.com> + +properties: + "#clock-cells": + const: 1 + + compatible: + oneOf: + - const: allwinner,sun6i-a31-rtc + - const: allwinner,sun8i-a23-rtc + - const: allwinner,sun8i-h3-rtc + - const: allwinner,sun8i-r40-rtc + - const: allwinner,sun8i-v3-rtc + - const: allwinner,sun50i-h5-rtc + - items: + - const: allwinner,sun50i-a64-rtc + - const: allwinner,sun8i-h3-rtc + + reg: + maxItems: 1 + + interrupts: + minItems: 1 + maxItems: 2 + items: + - description: RTC Alarm 0 + - description: RTC Alarm 1 + + clocks: + maxItems: 1 + + clock-output-names: + minItems: 1 + maxItems: 3 + description: + The RTC provides up to three clocks + - the Low Frequency Oscillator or LOSC, at index 0, + - the Low Frequency Oscillator External output (X32KFOUT in + the datasheet), at index 1, + - the Internal Oscillator, at index 2. + +allOf: + - $ref: "rtc.yaml#" + - if: + properties: + compatible: + contains: + const: allwinner,sun6i-a31-rtc + + then: + properties: + clock-output-names: + minItems: 1 + maxItems: 1 + + - if: + properties: + compatible: + contains: + enum: + - allwinner,sun8i-a23-rtc + - allwinner,sun8i-r40-rtc + - allwinner,sun8i-v3-rtc + + then: + properties: + clock-output-names: + minItems: 2 + maxItems: 2 + + - if: + properties: + compatible: + contains: + enum: + - allwinner,sun8i-h3-rtc + - allwinner,sun50i-h5-rtc + + then: + properties: + clock-output-names: + minItems: 3 + maxItems: 3 + + - if: + properties: + compatible: + contains: + const: allwinner,sun8i-r40-rtc + + then: + properties: + interrupts: + minItems: 1 + maxItems: 1 + + else: + properties: + interrupts: + minItems: 2 + maxItems: 2 + +required: + - "#clock-cells" + - compatible + - reg + - interrupts + - clocks + - clock-output-names + +additionalProperties: false + +examples: + - | + rtc: rtc@1f00000 { + compatible = "allwinner,sun6i-a31-rtc"; + reg = <0x01f00000 0x400>; + interrupts = <0 40 4>, <0 41 4>; + clock-output-names = "osc32k"; + clocks = <&ext_osc32k>; + #clock-cells = <1>; + }; + +... diff --git a/dts/Bindings/rtc/rtc.txt b/dts/Bindings/rtc/rtc.txt index a97fc6a9a7..b8d36fce5e 100644 --- a/dts/Bindings/rtc/rtc.txt +++ b/dts/Bindings/rtc/rtc.txt @@ -1,72 +1 @@ -Generic device tree bindings for Real Time Clock devices -======================================================== - -This document describes generic bindings which can be used to describe Real Time -Clock devices in a device tree. - -Required properties -------------------- - -- compatible : name of RTC device following generic names recommended practice. - -For other required properties e.g. to describe register sets, -clocks, etc. check the binding documentation of the specific driver. - -Optional properties -------------------- - -- start-year : if provided, the default hardware range supported by the RTC is - shifted so the first usable year is the specified one. - -The following properties may not be supported by all drivers. However, if a -driver wants to support one of the below features, it should adapt the bindings -below. -- trickle-resistor-ohms : Selected resistor for trickle charger. Should be given - if trickle charger should be enabled -- trickle-diode-disable : Do not use internal trickle charger diode Should be - given if internal trickle charger diode should be - disabled -- wakeup-source : Enables wake up of host system on alarm -- quartz-load-femtofarads : The capacitive load of the quartz(x-tal), - expressed in femto Farad (fF). - The default value shall be listed (if optional), - and likewise all valid values. - -Trivial RTCs ------------- - -This is a list of trivial RTC devices that have simple device tree -bindings, consisting only of a compatible field, an address and -possibly an interrupt line. - - -Compatible Vendor / Chip -========== ============= -abracon,abb5zes3 AB-RTCMC-32.768kHz-B5ZE-S3: Real Time Clock/Calendar Module with I2C Interface -abracon,abeoz9 AB-RTCMC-32.768kHz-EOZ9: Real Time Clock/Calendar Module with I2C Interface -dallas,ds1374 I2C, 32-Bit Binary Counter Watchdog RTC with Trickle Charger and Reset Input/Output -dallas,ds1672 Dallas DS1672 Real-time Clock -dallas,ds3232 Extremely Accurate I²C RTC with Integrated Crystal and SRAM -epson,rx8010 I2C-BUS INTERFACE REAL TIME CLOCK MODULE -epson,rx8571 I2C-BUS INTERFACE REAL TIME CLOCK MODULE with Battery Backed RAM -epson,rx8581 I2C-BUS INTERFACE REAL TIME CLOCK MODULE -emmicro,em3027 EM Microelectronic EM3027 Real-time Clock -isil,isl1208 Intersil ISL1208 Low Power RTC with Battery Backed SRAM -isil,isl1218 Intersil ISL1218 Low Power RTC with Battery Backed SRAM -isil,isl12022 Intersil ISL12022 Real-time Clock -microcrystal,rv3028 Real Time Clock Module with I2C-Bus -microcrystal,rv3029 Real Time Clock Module with I2C-Bus -microcrystal,rv8523 Real Time Clock -nxp,pcf2127 Real-time clock -nxp,pcf2129 Real-time clock -nxp,pcf8563 Real-time clock/calendar -pericom,pt7c4338 Real-time Clock Module -ricoh,r2025sd I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC -ricoh,r2221tl I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC -ricoh,rs5c372a I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC -ricoh,rs5c372b I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC -ricoh,rv5c386 I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC -ricoh,rv5c387a I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC -sii,s35390a 2-wire CMOS real-time clock -whwave,sd3078 I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC -xircom,x1205 Xircom X1205 I2C RTC +This file has been moved to rtc.yaml. diff --git a/dts/Bindings/rtc/rtc.yaml b/dts/Bindings/rtc/rtc.yaml new file mode 100644 index 0000000000..ee237b2ed6 --- /dev/null +++ b/dts/Bindings/rtc/rtc.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/rtc/rtc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: RTC Generic Binding + +maintainers: + - Alexandre Belloni <alexandre.belloni@bootlin.com> + +description: | + This document describes generic bindings which can be used to + describe Real Time Clock devices in a device tree. + +properties: + $nodename: + pattern: "^rtc(@.*|-[0-9a-f])*$" + + quartz-load-femtofarads: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + The capacitive load of the quartz(x-tal), expressed in femto + Farad (fF). The default value shall be listed (if optional), + and likewise all valid values. + + start-year: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + If provided, the default hardware range supported by the RTC is + shifted so the first usable year is the specified one. + + trickle-diode-disable: + $ref: /schemas/types.yaml#/definitions/flag + description: + Do not use internal trickle charger diode. Should be given if + internal trickle charger diode should be disabled. + + trickle-resistor-ohms: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Selected resistor for trickle charger. Should be given + if trickle charger should be enabled. + + wakeup-source: + $ref: /schemas/types.yaml#/definitions/flag + description: + Enables wake up of host system on alarm. + +... diff --git a/dts/Bindings/rtc/sun6i-rtc.txt b/dts/Bindings/rtc/sun6i-rtc.txt deleted file mode 100644 index 6b732c4139..0000000000 --- a/dts/Bindings/rtc/sun6i-rtc.txt +++ /dev/null @@ -1,46 +0,0 @@ -* sun6i Real Time Clock - -RTC controller for the Allwinner A31 - -Required properties: -- compatible : Should be one of the following combinations: - - "allwinner,sun6i-a31-rtc" - - "allwinner,sun8i-a23-rtc" - - "allwinner,sun8i-h3-rtc" - - "allwinner,sun8i-r40-rtc", "allwinner,sun8i-h3-rtc" - - "allwinner,sun8i-v3-rtc" - - "allwinner,sun50i-a64-rtc", "allwinner,sun8i-h3-rtc" - - "allwinner,sun50i-h5-rtc" - - Where there are two or more compatible strings, this - denotes the hardware covered by the most specific one - is backward-compatible with the latter ones, and the - implementation for the latter ones can be used, albeit - with reduced functionality. - -- reg : physical base address of the controller and length of - memory mapped region. -- interrupts : IRQ lines for the RTC alarm 0 and alarm 1, in that order. - -Required properties for new device trees -- clocks : phandle to the 32kHz external oscillator -- clock-output-names : names of up to three clock outputs. See below. -- #clock-cells : must be equal to 1. - -The RTC provides the following clocks at the given indices: -- 0: LOSC -- 1: LOSC external output, known as X32KFOUT in the datasheet. - This clock is not available on the A31 and is deprecated for old - device trees still using the "allwinner,sun6i-a31-rtc" compatible. -- 2: InternalOSC, or internal RC oscillator (A64/H3/H5 only) - -Example: - -rtc: rtc@1f00000 { - compatible = "allwinner,sun6i-a31-rtc"; - reg = <0x01f00000 0x400>; - interrupts = <0 40 4>, <0 41 4>; - clock-output-names = "osc32k"; - clocks = <&ext_osc32k>; - #clock-cells = <1>; -}; diff --git a/dts/Bindings/rtc/sunxi-rtc.txt b/dts/Bindings/rtc/sunxi-rtc.txt deleted file mode 100644 index 4a8d79c1cf..0000000000 --- a/dts/Bindings/rtc/sunxi-rtc.txt +++ /dev/null @@ -1,17 +0,0 @@ -* sun4i/sun7i Real Time Clock - -RTC controller for the Allwinner A10/A20 - -Required properties: -- compatible : Should be "allwinner,sun4i-a10-rtc" or "allwinner,sun7i-a20-rtc" -- reg: physical base address of the controller and length of memory mapped - region. -- interrupts: IRQ line for the RTC. - -Example: - -rtc: rtc@1c20d00 { - compatible = "allwinner,sun4i-a10-rtc"; - reg = <0x01c20d00 0x20>; - interrupts = <24>; -}; diff --git a/dts/Bindings/rtc/trivial-rtc.yaml b/dts/Bindings/rtc/trivial-rtc.yaml new file mode 100644 index 0000000000..0c12ce9a9b --- /dev/null +++ b/dts/Bindings/rtc/trivial-rtc.yaml @@ -0,0 +1,92 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/rtc/trivial-rtc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Trivial RTCs + +maintainers: + - Alexandre Belloni <alexandre.belloni@bootlin.com> + +description: | + This is a list of trivial RTC devices that have simple device tree + bindings, consisting only of a compatible field, an address and + possibly an interrupt line. + +allOf: + - $ref: "rtc.yaml#" + +properties: + compatible: + enum: + # AB-RTCMC-32.768kHz-B5ZE-S3: Real Time Clock/Calendar Module with I2C Interface + - abracon,abb5zes3 + # AB-RTCMC-32.768kHz-EOZ9: Real Time Clock/Calendar Module with I2C Interface + - abracon,abeoz9 + # I2C, 32-Bit Binary Counter Watchdog RTC with Trickle Charger and Reset Input/Output + - dallas,ds1374 + # Dallas DS1672 Real-time Clock + - dallas,ds1672 + # Extremely Accurate I²C RTC with Integrated Crystal and SRAM + - dallas,ds3232 + # I2C-BUS INTERFACE REAL TIME CLOCK MODULE + - epson,rx8010 + # I2C-BUS INTERFACE REAL TIME CLOCK MODULE with Battery Backed RAM + - epson,rx8571 + # I2C-BUS INTERFACE REAL TIME CLOCK MODULE + - epson,rx8581 + # Intersil ISL1208 Low Power RTC with Battery Backed SRAM + - isil,isl1208 + # Intersil ISL1218 Low Power RTC with Battery Backed SRAM + - isil,isl1218 + # Intersil ISL12022 Real-time Clock + - isil,isl12022 + # Real Time Clock Module with I2C-Bus + - microcrystal,rv3028 + # Real Time Clock Module with I2C-Bus + - microcrystal,rv3029 + # Real Time Clock + - microcrystal,rv8523 + # Real-time clock + - nxp,pcf2127 + # Real-time clock + - nxp,pcf2129 + # Real-time clock/calendar + - nxp,pcf8563 + # Real-time Clock Module + - pericom,pt7c4338 + # I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC + - ricoh,r2025sd + # I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC + - ricoh,r2221tl + # I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC + - ricoh,rs5c372a + # I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC + - ricoh,rs5c372b + # I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC + - ricoh,rv5c386 + # I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC + - ricoh,rv5c387a + # 2-wire CMOS real-time clock + - sii,s35390a + # I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC + - whwave,sd3078 + # Xircom X1205 I2C RTC + - xircom,x1205 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + start-year: true + +required: + - compatible + - reg + +additionalProperties: false + +... diff --git a/dts/Bindings/serial/8250.txt b/dts/Bindings/serial/8250.txt index 3cba12f855..20d351f268 100644 --- a/dts/Bindings/serial/8250.txt +++ b/dts/Bindings/serial/8250.txt @@ -53,6 +53,9 @@ Optional properties: programmable TX FIFO thresholds. - resets : phandle + reset specifier pairs - overrun-throttle-ms : how long to pause uart rx when input overrun is encountered. +- {rts,cts,dtr,dsr,rng,dcd}-gpios: specify a GPIO for RTS/CTS/DTR/DSR/RI/DCD + line respectively. It will use specified GPIO instead of the peripheral + function pin for the UART feature. If unsure, don't specify this property. Note: * fsl,ns16550: @@ -74,3 +77,19 @@ Example: interrupts = <10>; reg-shift = <2>; }; + +Example for OMAP UART using GPIO-based modem control signals: + + uart4: serial@49042000 { + compatible = "ti,omap3-uart"; + reg = <0x49042000 0x400>; + interrupts = <80>; + ti,hwmods = "uart4"; + clock-frequency = <48000000>; + cts-gpios = <&gpio3 5 GPIO_ACTIVE_LOW>; + rts-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>; + dtr-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; + dsr-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; + dcd-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; + rng-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; + }; diff --git a/dts/Bindings/serial/mtk-uart.txt b/dts/Bindings/serial/mtk-uart.txt index c6b5262eb3..6fdffb735f 100644 --- a/dts/Bindings/serial/mtk-uart.txt +++ b/dts/Bindings/serial/mtk-uart.txt @@ -23,7 +23,12 @@ Required properties: - reg: The base address of the UART register bank. -- interrupts: A single interrupt specifier. +- interrupts: + index 0: an interrupt specifier for the UART controller itself + index 1: optional, an interrupt specifier with edge sensitivity on Rx pin to + support Rx in-band wake up. If one would like to use this feature, + one must create an addtional pinctrl to reconfigure Rx pin to normal + GPIO before suspend. - clocks : Must contain an entry for each entry in clock-names. See ../clocks/clock-bindings.txt for details. @@ -39,7 +44,11 @@ Example: uart0: serial@11006000 { compatible = "mediatek,mt6589-uart", "mediatek,mt6577-uart"; reg = <0x11006000 0x400>; - interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 52 IRQ_TYPE_EDGE_FALLING>; clocks = <&uart_clk>, <&bus_clk>; clock-names = "baud", "bus"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&uart_pin>; + pinctrl-1 = <&uart_pin_sleep>; }; diff --git a/dts/Bindings/serial/omap_serial.txt b/dts/Bindings/serial/omap_serial.txt index 0a9b5444f4..dcba86b0a0 100644 --- a/dts/Bindings/serial/omap_serial.txt +++ b/dts/Bindings/serial/omap_serial.txt @@ -1,6 +1,7 @@ OMAP UART controller Required properties: +- compatible : should be "ti,j721e-uart", "ti,am654-uart" for J721E controllers - compatible : should be "ti,am654-uart" for AM654 controllers - compatible : should be "ti,omap2-uart" for OMAP2 controllers - compatible : should be "ti,omap3-uart" for OMAP3 controllers diff --git a/dts/Bindings/serial/st,stm32-usart.txt b/dts/Bindings/serial/st,stm32-usart.txt index 9d3efed55d..a6b19485c9 100644 --- a/dts/Bindings/serial/st,stm32-usart.txt +++ b/dts/Bindings/serial/st,stm32-usart.txt @@ -13,6 +13,7 @@ Required properties: - clocks: The input clock of the USART instance Optional properties: +- resets: Must contain the phandle to the reset controller. - pinctrl: The reference on the pins configuration - st,hw-flow-ctrl: bool flag to enable hardware flow control. - rs485-rts-delay, rs485-rx-during-tx, rs485-rts-active-low, diff --git a/dts/Bindings/soc/amlogic/amlogic,canvas.txt b/dts/Bindings/soc/amlogic/amlogic,canvas.txt index 436d2106e8..e876f3ce54 100644 --- a/dts/Bindings/soc/amlogic/amlogic,canvas.txt +++ b/dts/Bindings/soc/amlogic/amlogic,canvas.txt @@ -2,8 +2,8 @@ Amlogic Canvas ================================ A canvas is a collection of metadata that describes a pixel buffer. -Those metadata include: width, height, phyaddr, wrapping, block mode -and endianness. +Those metadata include: width, height, phyaddr, wrapping and block mode. +Starting with GXBB the endianness can also be described. Many IPs within Amlogic SoCs rely on canvas indexes to read/write pixel data rather than use the phy addresses directly. For instance, this is the case for @@ -18,7 +18,11 @@ Video Lookup Table -------------------------- Required properties: -- compatible: "amlogic,canvas" +- compatible: has to be one of: + - "amlogic,meson8-canvas", "amlogic,canvas" on Meson8 + - "amlogic,meson8b-canvas", "amlogic,canvas" on Meson8b + - "amlogic,meson8m2-canvas", "amlogic,canvas" on Meson8m2 + - "amlogic,canvas" on GXBB and newer - reg: Base physical address and size of the canvas registers. Example: diff --git a/dts/Bindings/soc/qcom/qcom,aoss-qmp.txt b/dts/Bindings/soc/qcom/qcom,aoss-qmp.txt new file mode 100644 index 0000000000..954ffee0a9 --- /dev/null +++ b/dts/Bindings/soc/qcom/qcom,aoss-qmp.txt @@ -0,0 +1,81 @@ +Qualcomm Always-On Subsystem side channel binding + +This binding describes the hardware component responsible for side channel +requests to the always-on subsystem (AOSS), used for certain power management +requests that is not handled by the standard RPMh interface. Each client in the +SoC has it's own block of message RAM and IRQ for communication with the AOSS. +The protocol used to communicate in the message RAM is known as Qualcomm +Messaging Protocol (QMP) + +The AOSS side channel exposes control over a set of resources, used to control +a set of debug related clocks and to affect the low power state of resources +related to the secondary subsystems. These resources are exposed as a set of +power-domains. + +- compatible: + Usage: required + Value type: <string> + Definition: must be "qcom,sdm845-aoss-qmp" + +- reg: + Usage: required + Value type: <prop-encoded-array> + Definition: the base address and size of the message RAM for this + client's communication with the AOSS + +- interrupts: + Usage: required + Value type: <prop-encoded-array> + Definition: should specify the AOSS message IRQ for this client + +- mboxes: + Usage: required + Value type: <prop-encoded-array> + Definition: reference to the mailbox representing the outgoing doorbell + in APCS for this client, as described in mailbox/mailbox.txt + +- #clock-cells: + Usage: optional + Value type: <u32> + Definition: must be 0 + The single clock represents the QDSS clock. + +- #power-domain-cells: + Usage: optional + Value type: <u32> + Definition: must be 1 + The provided power-domains are: + CDSP state (0), LPASS state (1), modem state (2), SLPI + state (3), SPSS state (4) and Venus state (5). + += SUBNODES +The AOSS side channel also provides the controls for three cooling devices, +these are expressed as subnodes of the QMP node. The name of the node is used +to identify the resource and must therefor be "cx", "mx" or "ebi". + +- #cooling-cells: + Usage: optional + Value type: <u32> + Definition: must be 2 + += EXAMPLE + +The following example represents the AOSS side-channel message RAM and the +mechanism exposing the power-domains, as found in SDM845. + + aoss_qmp: qmp@c300000 { + compatible = "qcom,sdm845-aoss-qmp"; + reg = <0x0c300000 0x100000>; + interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>; + mboxes = <&apss_shared 0>; + + #power-domain-cells = <1>; + + cx_cdev: cx { + #cooling-cells = <2>; + }; + + mx_cdev: mx { + #cooling-cells = <2>; + }; + }; diff --git a/dts/Bindings/soc/qcom/qcom,apr.txt b/dts/Bindings/soc/qcom/qcom,apr.txt index bcc612cc74..db501269f4 100644 --- a/dts/Bindings/soc/qcom/qcom,apr.txt +++ b/dts/Bindings/soc/qcom/qcom,apr.txt @@ -9,7 +9,7 @@ used for audio/voice services on the QDSP. Value type: <stringlist> Definition: must be "qcom,apr-v<VERSION-NUMBER>", example "qcom,apr-v2" -- reg +- qcom,apr-domain Usage: required Value type: <u32> Definition: Destination processor ID. @@ -49,9 +49,9 @@ by the individual bindings for the specific service The following example represents a QDSP based sound card on a MSM8996 device which uses apr as communication between Apps and QDSP. - apr@4 { + apr { compatible = "qcom,apr-v2"; - reg = <APR_DOMAIN_ADSP>; + qcom,apr-domain = <APR_DOMAIN_ADSP>; q6core@3 { compatible = "qcom,q6core"; diff --git a/dts/Bindings/soc/qcom/qcom,glink.txt b/dts/Bindings/soc/qcom/qcom,glink.txt index cf759e5f9b..1214192847 100644 --- a/dts/Bindings/soc/qcom/qcom,glink.txt +++ b/dts/Bindings/soc/qcom/qcom,glink.txt @@ -21,6 +21,11 @@ edge. Definition: should specify the IRQ used by the remote processor to signal this processor about communication related events +- qcom,remote-pid: + Usage: required for glink-smem + Value type: <u32> + Definition: specifies the identifier of the remote endpoint of this edge + - qcom,rpm-msg-ram: Usage: required for glink-rpm Value type: <prop-encoded-array> diff --git a/dts/Bindings/sound/allwinner,sun4i-a10-i2s.yaml b/dts/Bindings/sound/allwinner,sun4i-a10-i2s.yaml new file mode 100644 index 0000000000..eb3992138e --- /dev/null +++ b/dts/Bindings/sound/allwinner,sun4i-a10-i2s.yaml @@ -0,0 +1,132 @@ +# SPDX-License-Identifier: (GPL-2.0+ OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/allwinner,sun4i-a10-i2s.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A10 I2S Controller Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <maxime.ripard@bootlin.com> + +properties: + "#sound-dai-cells": + const: 0 + + compatible: + oneOf: + - const: allwinner,sun4i-a10-i2s + - const: allwinner,sun6i-a31-i2s + - const: allwinner,sun8i-a83t-i2s + - const: allwinner,sun8i-h3-i2s + - const: allwinner,sun50i-a64-codec-i2s + - items: + - const: allwinner,sun50i-a64-i2s + - const: allwinner,sun8i-h3-i2s + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: Bus Clock + - description: Module Clock + + clock-names: + items: + - const: apb + - const: mod + + # Even though it only applies to subschemas under the conditionals, + # not listing them here will trigger a warning because of the + # additionalsProperties set to false. + dmas: true + dma-names: true + resets: + maxItems: 1 + +allOf: + - if: + properties: + compatible: + contains: + enum: + - allwinner,sun6i-a31-i2s + - allwinner,sun8i-a83t-i2s + - allwinner,sun8i-h3-i2s + - allwinner,sun50i-a64-codec-i2s + + then: + required: + - resets + + - if: + properties: + compatible: + contains: + const: allwinner,sun8i-a83t-i2s + + then: + properties: + dmas: + minItems: 1 + maxItems: 2 + items: + - description: RX DMA Channel + - description: TX DMA Channel + description: + Some controllers cannot receive but can only transmit + data. In such a case, the RX DMA channel is to be omitted. + + dma-names: + oneOf: + - items: + - const: rx + - const: tx + - const: tx + description: + Some controllers cannot receive but can only transmit + data. In such a case, the RX name is to be omitted. + + else: + properties: + dmas: + items: + - description: RX DMA Channel + - description: TX DMA Channel + + dma-names: + items: + - const: rx + - const: tx + +required: + - "#sound-dai-cells" + - compatible + - reg + - interrupts + - clocks + - clock-names + - dmas + - dma-names + +additionalProperties: false + +examples: + - | + i2s0: i2s@1c22400 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun4i-a10-i2s"; + reg = <0x01c22400 0x400>; + interrupts = <0 16 4>; + clocks = <&apb0_gates 3>, <&i2s0_clk>; + clock-names = "apb", "mod"; + dmas = <&dma 0 3>, <&dma 0 3>; + dma-names = "rx", "tx"; + }; + +... diff --git a/dts/Bindings/sound/allwinner,sun4i-a10-spdif.yaml b/dts/Bindings/sound/allwinner,sun4i-a10-spdif.yaml new file mode 100644 index 0000000000..e0284d8c3b --- /dev/null +++ b/dts/Bindings/sound/allwinner,sun4i-a10-spdif.yaml @@ -0,0 +1,120 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/allwinner,sun4i-a10-spdif.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A10 S/PDIF Controller Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Liam Girdwood <lgirdwood@gmail.com> + - Mark Brown <broonie@kernel.org> + - Maxime Ripard <maxime.ripard@bootlin.com> + +properties: + "#sound-dai-cells": + const: 0 + + compatible: + oneOf: + - const: allwinner,sun4i-a10-spdif + - const: allwinner,sun6i-a31-spdif + - const: allwinner,sun8i-h3-spdif + - const: allwinner,sun50i-h6-spdif + - items: + - const: allwinner,sun8i-a83t-spdif + - const: allwinner,sun8i-h3-spdif + - items: + - const: allwinner,sun50i-a64-spdif + - const: allwinner,sun8i-h3-spdif + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: Bus Clock + - description: Module Clock + + clock-names: + items: + - const: apb + - const: spdif + + # Even though it only applies to subschemas under the conditionals, + # not listing them here will trigger a warning because of the + # additionalsProperties set to false. + dmas: true + dma-names: true + resets: + maxItems: 1 + +allOf: + - if: + properties: + compatible: + contains: + enum: + - allwinner,sun6i-a31-spdif + - allwinner,sun8i-h3-spdif + + then: + required: + - resets + + - if: + properties: + compatible: + contains: + const: allwinner,sun8i-h3-spdif + + then: + properties: + dmas: + description: TX DMA Channel + + dma-names: + const: tx + + else: + properties: + dmas: + items: + - description: RX DMA Channel + - description: TX DMA Channel + + dma-names: + items: + - const: rx + - const: tx + +required: + - "#sound-dai-cells" + - compatible + - reg + - interrupts + - clocks + - clock-names + - dmas + - dma-names + +additionalProperties: false + +examples: + - | + spdif: spdif@1c21000 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun4i-a10-spdif"; + reg = <0x01c21000 0x40>; + interrupts = <13>; + clocks = <&apb0_gates 1>, <&spdif_clk>; + clock-names = "apb", "spdif"; + dmas = <&dma 0 2>, <&dma 0 2>; + dma-names = "rx", "tx"; + }; + +... diff --git a/dts/Bindings/sound/amlogic,axg-tdm-formatters.txt b/dts/Bindings/sound/amlogic,axg-tdm-formatters.txt index 3b94a715a0..8835a43edf 100644 --- a/dts/Bindings/sound/amlogic,axg-tdm-formatters.txt +++ b/dts/Bindings/sound/amlogic,axg-tdm-formatters.txt @@ -15,11 +15,15 @@ Required properties: * "lrclk" : sample clock * "lrclk_sel": sample clock input multiplexer -Example of TDMOUT_A on the A113 SoC: +Optional property: +- resets: phandle to the dedicated reset line of the tdm formatter. + +Example of TDMOUT_A on the S905X2 SoC: tdmout_a: audio-controller@500 { compatible = "amlogic,axg-tdmout"; reg = <0x0 0x500 0x0 0x40>; + resets = <&clkc_audio AUD_RESET_TDMOUT_A>; clocks = <&clkc_audio AUD_CLKID_TDMOUT_A>, <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK>, <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK_SEL>, diff --git a/dts/Bindings/sound/amlogic,g12a-tohdmitx.txt b/dts/Bindings/sound/amlogic,g12a-tohdmitx.txt new file mode 100644 index 0000000000..aa6c35570d --- /dev/null +++ b/dts/Bindings/sound/amlogic,g12a-tohdmitx.txt @@ -0,0 +1,55 @@ +* Amlogic HDMI Tx control glue + +Required properties: +- compatible: "amlogic,g12a-tohdmitx" +- reg: physical base address of the controller and length of memory + mapped region. +- #sound-dai-cells: should be 1. + +Example on the S905X2 SoC: + +tohdmitx: audio-controller@744 { + compatible = "amlogic,g12a-tohdmitx"; + reg = <0x0 0x744 0x0 0x4>; + #sound-dai-cells = <1>; +}; + +Example of an 'amlogic,axg-sound-card': + +sound { + compatible = "amlogic,axg-sound-card"; + +[...] + + dai-link-x { + sound-dai = <&tdmif_a>; + dai-format = "i2s"; + dai-tdm-slot-tx-mask-0 = <1 1>; + + codec-0 { + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_A>; + }; + + codec-1 { + sound-dai = <&external_dac>; + }; + }; + + dai-link-y { + sound-dai = <&tdmif_c>; + dai-format = "i2s"; + dai-tdm-slot-tx-mask-0 = <1 1>; + + codec { + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_C>; + }; + }; + + dai-link-z { + sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; + + codec { + sound-dai = <&hdmi_tx>; + }; + }; +}; diff --git a/dts/Bindings/sound/cs42l73.txt b/dts/Bindings/sound/cs42l73.txt index 80ae910dbf..47b868b5ab 100644 --- a/dts/Bindings/sound/cs42l73.txt +++ b/dts/Bindings/sound/cs42l73.txt @@ -19,4 +19,4 @@ codec: cs42l73@4a { reg = <0x4a>; reset_gpio = <&gpio 10 0>; chgfreq = <0x05>; -};
\ No newline at end of file +}; diff --git a/dts/Bindings/sound/cs42xx8.txt b/dts/Bindings/sound/cs42xx8.txt index 8619a156d0..bbfe39347c 100644 --- a/dts/Bindings/sound/cs42xx8.txt +++ b/dts/Bindings/sound/cs42xx8.txt @@ -14,6 +14,11 @@ Required properties: - VA-supply, VD-supply, VLS-supply, VLC-supply: power supplies for the device, as covered in Documentation/devicetree/bindings/regulator/regulator.txt +Optional properties: + + - reset-gpios : a GPIO spec to define which pin is connected to the chip's + !RESET pin + Example: cs42888: codec@48 { @@ -25,4 +30,5 @@ cs42888: codec@48 { VD-supply = <®_audio>; VLS-supply = <®_audio>; VLC-supply = <®_audio>; + reset-gpios = <&pca9557_b 1 GPIO_ACTIVE_LOW>; }; diff --git a/dts/Bindings/sound/davinci-mcasp-audio.txt b/dts/Bindings/sound/davinci-mcasp-audio.txt index a58f79f534..c483dcec01 100644 --- a/dts/Bindings/sound/davinci-mcasp-audio.txt +++ b/dts/Bindings/sound/davinci-mcasp-audio.txt @@ -44,6 +44,9 @@ Optional properties: please refer to pinctrl-bindings.txt - fck_parent : Should contain a valid clock name which will be used as parent for the McASP fck +- auxclk-fs-ratio: When McASP is bus master indicates the ratio between AUCLK + and FS rate if applicable: + AUCLK rate = auxclk-fs-ratio * FS rate Optional GPIO support: If any McASP pin need to be used as GPIO then the McASP node must have: diff --git a/dts/Bindings/sound/madera.txt b/dts/Bindings/sound/madera.txt new file mode 100644 index 0000000000..5e669ce552 --- /dev/null +++ b/dts/Bindings/sound/madera.txt @@ -0,0 +1,67 @@ +Cirrus Logic Madera class audio codecs + +This describes audio configuration bindings for these codecs. + +See also the core bindings for the parent MFD driver: +See Documentation/devicetree/bindings/mfd/madera.txt + +and defines for values used in these bindings: +include/dt-bindings/sound/madera.h + +These properties are all contained in the parent MFD node. + +Optional properties: + - cirrus,dmic-ref : Indicates how the MICBIAS pins have been externally + connected to DMICs on each input, one cell per input. + <IN1 IN2 IN3 ...> + A value of 0 indicates MICVDD and is the default, other values depend on the + codec: + For CS47L35 one of the CS47L35_DMIC_REF_xxx values + For all other codecs one of the MADERA_DMIC_REF_xxx values + Also see the datasheet for a description of the INn_DMIC_SUP field. + + - cirrus,inmode : A list of input mode settings for each input. A maximum of + 16 cells, with four cells per input in the order INnAL, INnAR INnBL INnBR. + For non-muxed inputs the first two cells for that input set the mode for + the left and right channel and the second two cells must be 0. + For muxed inputs the first two cells for that input set the mode of the + left and right A inputs and the second two cells set the mode of the left + and right B inputs. + Valid mode values are one of the MADERA_INMODE_xxx. If the array is shorter + than the number of inputs the unspecified inputs default to + MADERA_INMODE_DIFF. + + - cirrus,out-mono : Mono bit for each output, maximum of six cells if the + array is shorter outputs will be set to stereo. + + - cirrus,max-channels-clocked : Maximum number of channels that I2S clocks + will be generated for. Useful when clock master for systems where the I2S + bus has multiple data lines. + One cell for each AIF, use a value of zero for AIFs that should be handled + normally. + + - cirrus,pdm-fmt : PDM speaker data format, must contain 2 cells + (OUT5 and OUT6). See the PDM_SPKn_FMT field in the datasheet for a + description of this value. + The second cell is ignored for codecs that do not have OUT6. + + - cirrus,pdm-mute : PDM mute format, must contain 2 cells + (OUT5 and OUT6). See the PDM_SPKn_CTRL_1 register in the datasheet for a + description of this value. + The second cell is ignored for codecs that do not have OUT6. + +Example: + +cs47l35@0 { + compatible = "cirrus,cs47l35"; + + cirrus,dmic-ref = <0 0 CS47L35_DMIC_REF_MICBIAS1B 0>; + cirrus,inmode = < + MADERA_INMODE_DMIC MADERA_INMODE_DMIC /* IN1A digital */ + MADERA_INMODE_SE MADERA_INMODE_SE /* IN1B single-ended */ + MADERA_INMODE_DIFF MADERA_INMODE_DIFF /* IN2 differential */ + 0 0 /* not used on this codec */ + >; + cirrus,out-mono = <0 0 0 0 0 0>; + cirrus,max-channels-clocked = <2 0 0>; +}; diff --git a/dts/Bindings/sound/max98357a.txt b/dts/Bindings/sound/max98357a.txt index 28645a2ff8..4bce14ce80 100644 --- a/dts/Bindings/sound/max98357a.txt +++ b/dts/Bindings/sound/max98357a.txt @@ -9,6 +9,10 @@ Optional properties: - sdmode-gpios : GPIO specifier for the chip's SD_MODE pin. If this option is not specified then driver does not manage the pin state (e.g. chip is always on). +- sdmode-delay : specify delay time for SD_MODE pin. + If this option is specified, which means it's required i2s clocks + ready before SD_MODE is unmuted in order to avoid the speaker pop noise. + It's observed that 5ms is sufficient. Example: diff --git a/dts/Bindings/sound/rt1011.txt b/dts/Bindings/sound/rt1011.txt new file mode 100644 index 0000000000..35a23e60d6 --- /dev/null +++ b/dts/Bindings/sound/rt1011.txt @@ -0,0 +1,32 @@ +RT1011 Mono Class D Audio Amplifier + +This device supports I2C only. + +Required properties: + +- compatible : "realtek,rt1011". + +- reg : The I2C address of the device. This I2C address decide by + two input pins (ASEL1 and ASEL2). + ------------------------------------- + | ASEL2 | ASEL1 | Address | + ------------------------------------- + | 0 | 0 | 0x38 | + ------------------------------------- + | 0 | 1 | 0x39 | + ------------------------------------- + | 1 | 0 | 0x3a | + ------------------------------------- + | 1 | 1 | 0x3b | + ------------------------------------- + +Pins on the device (for linking into audio routes) for RT1011: + + * SPO + +Example: + +rt1011: codec@38 { + compatible = "realtek,rt1011"; + reg = <0x38>; +}; diff --git a/dts/Bindings/sound/rt1308.txt b/dts/Bindings/sound/rt1308.txt new file mode 100755 index 0000000000..2d46084afc --- /dev/null +++ b/dts/Bindings/sound/rt1308.txt @@ -0,0 +1,17 @@ +RT1308 audio Amplifier + +This device supports I2C only. + +Required properties: + +- compatible : "realtek,rt1308". + +- reg : The I2C address of the device. + + +Example: + +rt1308: rt1308@10 { + compatible = "realtek,rt1308"; + reg = <0x10>; +}; diff --git a/dts/Bindings/sound/st,stm32-i2s.txt b/dts/Bindings/sound/st,stm32-i2s.txt index 58c3413005..cbf24bcd1b 100644 --- a/dts/Bindings/sound/st,stm32-i2s.txt +++ b/dts/Bindings/sound/st,stm32-i2s.txt @@ -18,7 +18,7 @@ Required properties: See Documentation/devicetree/bindings/dma/stm32-dma.txt. - dma-names: Identifier for each DMA request line. Must be "tx" and "rx". - pinctrl-names: should contain only value "default" - - pinctrl-0: see Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt + - pinctrl-0: see Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml Optional properties: - resets: Reference to a reset controller asserting the reset controller diff --git a/dts/Bindings/sound/st,stm32-sai.txt b/dts/Bindings/sound/st,stm32-sai.txt index 3f4467ff0a..944743dd92 100644 --- a/dts/Bindings/sound/st,stm32-sai.txt +++ b/dts/Bindings/sound/st,stm32-sai.txt @@ -41,7 +41,7 @@ SAI subnodes required properties: "tx": if sai sub-block is configured as playback DAI "rx": if sai sub-block is configured as capture DAI - pinctrl-names: should contain only value "default" - - pinctrl-0: see Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt + - pinctrl-0: see Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml SAI subnodes Optional properties: - st,sync: specify synchronization mode. diff --git a/dts/Bindings/sound/sun4i-i2s.txt b/dts/Bindings/sound/sun4i-i2s.txt deleted file mode 100644 index 61e71c1729..0000000000 --- a/dts/Bindings/sound/sun4i-i2s.txt +++ /dev/null @@ -1,45 +0,0 @@ -* Allwinner A10 I2S controller - -The I2S bus (Inter-IC sound bus) is a serial link for digital -audio data transfer between devices in the system. - -Required properties: - -- compatible: should be one of the following: - - "allwinner,sun4i-a10-i2s" - - "allwinner,sun6i-a31-i2s" - - "allwinner,sun8i-a83t-i2s" - - "allwinner,sun8i-h3-i2s" - - "allwinner,sun50i-a64-codec-i2s" -- reg: physical base address of the controller and length of memory mapped - region. -- interrupts: should contain the I2S interrupt. -- dmas: DMA specifiers for tx and rx dma. See the DMA client binding, - Documentation/devicetree/bindings/dma/dma.txt -- dma-names: should include "tx" and "rx". -- clocks: a list of phandle + clock-specifer pairs, one for each entry in clock-names. -- clock-names: should contain the following: - - "apb" : clock for the I2S bus interface - - "mod" : module clock for the I2S controller -- #sound-dai-cells : Must be equal to 0 - -Required properties for the following compatibles: - - "allwinner,sun6i-a31-i2s" - - "allwinner,sun8i-a83t-i2s" - - "allwinner,sun8i-h3-i2s" - - "allwinner,sun50i-a64-codec-i2s" -- resets: phandle to the reset line for this codec - -Example: - -i2s0: i2s@1c22400 { - #sound-dai-cells = <0>; - compatible = "allwinner,sun4i-a10-i2s"; - reg = <0x01c22400 0x400>; - interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&apb0_gates 3>, <&i2s0_clk>; - clock-names = "apb", "mod"; - dmas = <&dma SUN4I_DMA_NORMAL 3>, - <&dma SUN4I_DMA_NORMAL 3>; - dma-names = "rx", "tx"; -}; diff --git a/dts/Bindings/sound/sunxi,sun4i-spdif.txt b/dts/Bindings/sound/sunxi,sun4i-spdif.txt deleted file mode 100644 index 0c64a209c2..0000000000 --- a/dts/Bindings/sound/sunxi,sun4i-spdif.txt +++ /dev/null @@ -1,42 +0,0 @@ -Allwinner Sony/Philips Digital Interface Format (S/PDIF) Controller - -The Allwinner S/PDIF audio block is a transceiver that allows the -processor to receive and transmit digital audio via an coaxial cable or -a fibre cable. -For now only playback is supported. - -Required properties: - - - compatible : should be one of the following: - - "allwinner,sun4i-a10-spdif": for the Allwinner A10 SoC - - "allwinner,sun6i-a31-spdif": for the Allwinner A31 SoC - - "allwinner,sun8i-h3-spdif": for the Allwinner H3 SoC - - - reg : Offset and length of the register set for the device. - - - interrupts : Contains the spdif interrupt. - - - dmas : Generic dma devicetree binding as described in - Documentation/devicetree/bindings/dma/dma.txt. - - - dma-names : Two dmas have to be defined, "tx" and "rx". - - - clocks : Contains an entry for each entry in clock-names. - - - clock-names : Includes the following entries: - "apb" clock for the spdif bus. - "spdif" clock for spdif controller. - - - resets : reset specifier for the ahb reset (A31 and newer only) - -Example: - -spdif: spdif@1c21000 { - compatible = "allwinner,sun4i-a10-spdif"; - reg = <0x01c21000 0x40>; - interrupts = <13>; - clocks = <&apb0_gates 1>, <&spdif_clk>; - clock-names = "apb", "spdif"; - dmas = <&dma 0 2>, <&dma 0 2>; - dma-names = "rx", "tx"; -}; diff --git a/dts/Bindings/spi/allwinner,sun4i-a10-spi.yaml b/dts/Bindings/spi/allwinner,sun4i-a10-spi.yaml new file mode 100644 index 0000000000..6d1329c281 --- /dev/null +++ b/dts/Bindings/spi/allwinner,sun4i-a10-spi.yaml @@ -0,0 +1,87 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/allwinner,sun4i-a10-spi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A10 SPI Controller Device Tree Bindings + +allOf: + - $ref: "spi-controller.yaml" + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <maxime.ripard@bootlin.com> + +properties: + "#address-cells": true + "#size-cells": true + + compatible: + const: allwinner,sun4i-a10-spi + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: Bus Clock + - description: Module Clock + + clock-names: + items: + - const: ahb + - const: mod + + dmas: + items: + - description: RX DMA Channel + - description: TX DMA Channel + + dma-names: + items: + - const: rx + - const: tx + + num-cs: true + +patternProperties: + "^.*@[0-9a-f]+": + type: object + properties: + reg: + items: + minimum: 0 + maximum: 4 + + spi-rx-bus-width: + const: 1 + + spi-tx-bus-width: + const: 1 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + spi1: spi@1c06000 { + compatible = "allwinner,sun4i-a10-spi"; + reg = <0x01c06000 0x1000>; + interrupts = <11>; + clocks = <&ahb_gates 21>, <&spi1_clk>; + clock-names = "ahb", "mod"; + #address-cells = <1>; + #size-cells = <0>; + }; + +... diff --git a/dts/Bindings/spi/allwinner,sun6i-a31-spi.yaml b/dts/Bindings/spi/allwinner,sun6i-a31-spi.yaml new file mode 100644 index 0000000000..f36c46d236 --- /dev/null +++ b/dts/Bindings/spi/allwinner,sun6i-a31-spi.yaml @@ -0,0 +1,107 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/allwinner,sun6i-a31-spi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A31 SPI Controller Device Tree Bindings + +allOf: + - $ref: "spi-controller.yaml" + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <maxime.ripard@bootlin.com> + +properties: + "#address-cells": true + "#size-cells": true + + compatible: + enum: + - allwinner,sun6i-a31-spi + - allwinner,sun8i-h3-spi + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: Bus Clock + - description: Module Clock + + clock-names: + items: + - const: ahb + - const: mod + + resets: + maxItems: 1 + + dmas: + items: + - description: RX DMA Channel + - description: TX DMA Channel + + dma-names: + items: + - const: rx + - const: tx + + num-cs: true + +patternProperties: + "^.*@[0-9a-f]+": + type: object + properties: + reg: + items: + minimum: 0 + maximum: 4 + + spi-rx-bus-width: + const: 1 + + spi-tx-bus-width: + const: 1 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + spi1: spi@1c69000 { + compatible = "allwinner,sun6i-a31-spi"; + reg = <0x01c69000 0x1000>; + interrupts = <0 66 4>; + clocks = <&ahb1_gates 21>, <&spi1_clk>; + clock-names = "ahb", "mod"; + resets = <&ahb1_rst 21>; + #address-cells = <1>; + #size-cells = <0>; + }; + + - | + spi0: spi@1c68000 { + compatible = "allwinner,sun8i-h3-spi"; + reg = <0x01c68000 0x1000>; + interrupts = <0 65 4>; + clocks = <&ccu 30>, <&ccu 82>; + clock-names = "ahb", "mod"; + dmas = <&dma 23>, <&dma 23>; + dma-names = "rx", "tx"; + resets = <&ccu 15>; + #address-cells = <1>; + #size-cells = <0>; + }; + +... diff --git a/dts/Bindings/spi/spi-bus.txt b/dts/Bindings/spi/spi-bus.txt index 1f6e86f787..e077835054 100644 --- a/dts/Bindings/spi/spi-bus.txt +++ b/dts/Bindings/spi/spi-bus.txt @@ -1,111 +1 @@ -SPI (Serial Peripheral Interface) busses - -SPI busses can be described with a node for the SPI controller device -and a set of child nodes for each SPI slave on the bus. The system's SPI -controller may be described for use in SPI master mode or in SPI slave mode, -but not for both at the same time. - -The SPI controller node requires the following properties: -- compatible - Name of SPI bus controller following generic names - recommended practice. - -In master mode, the SPI controller node requires the following additional -properties: -- #address-cells - number of cells required to define a chip select - address on the SPI bus. -- #size-cells - should be zero. - -In slave mode, the SPI controller node requires one additional property: -- spi-slave - Empty property. - -No other properties are required in the SPI bus node. It is assumed -that a driver for an SPI bus device will understand that it is an SPI bus. -However, the binding does not attempt to define the specific method for -assigning chip select numbers. Since SPI chip select configuration is -flexible and non-standardized, it is left out of this binding with the -assumption that board specific platform code will be used to manage -chip selects. Individual drivers can define additional properties to -support describing the chip select layout. - -Optional properties (master mode only): -- cs-gpios - gpios chip select. -- num-cs - total number of chipselects. - -If cs-gpios is used the number of chip selects will be increased automatically -with max(cs-gpios > hw cs). - -So if for example the controller has 2 CS lines, and the cs-gpios -property looks like this: - -cs-gpios = <&gpio1 0 0>, <0>, <&gpio1 1 0>, <&gpio1 2 0>; - -Then it should be configured so that num_chipselect = 4 with the -following mapping: - -cs0 : &gpio1 0 0 -cs1 : native -cs2 : &gpio1 1 0 -cs3 : &gpio1 2 0 - - -SPI slave nodes must be children of the SPI controller node. - -In master mode, one or more slave nodes (up to the number of chip selects) can -be present. Required properties are: -- compatible - Name of SPI device following generic names recommended - practice. -- reg - Chip select address of device. -- spi-max-frequency - Maximum SPI clocking speed of device in Hz. - -In slave mode, the (single) slave node is optional. -If present, it must be called "slave". Required properties are: -- compatible - Name of SPI device following generic names recommended - practice. - -All slave nodes can contain the following optional properties: -- spi-cpol - Empty property indicating device requires inverse clock - polarity (CPOL) mode. -- spi-cpha - Empty property indicating device requires shifted clock - phase (CPHA) mode. -- spi-cs-high - Empty property indicating device requires chip select - active high. -- spi-3wire - Empty property indicating device requires 3-wire mode. -- spi-lsb-first - Empty property indicating device requires LSB first mode. -- spi-tx-bus-width - The bus width (number of data wires) that is used for MOSI. - Defaults to 1 if not present. -- spi-rx-bus-width - The bus width (number of data wires) that is used for MISO. - Defaults to 1 if not present. -- spi-rx-delay-us - Microsecond delay after a read transfer. -- spi-tx-delay-us - Microsecond delay after a write transfer. - -Some SPI controllers and devices support Dual and Quad SPI transfer mode. -It allows data in the SPI system to be transferred using 2 wires (DUAL) or 4 -wires (QUAD). -Now the value that spi-tx-bus-width and spi-rx-bus-width can receive is -only 1 (SINGLE), 2 (DUAL) and 4 (QUAD). -Dual/Quad mode is not allowed when 3-wire mode is used. - -If a gpio chipselect is used for the SPI slave the gpio number will be passed -via the SPI master node cs-gpios property. - -SPI example for an MPC5200 SPI bus: - spi@f00 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi"; - reg = <0xf00 0x20>; - interrupts = <2 13 0 2 14 0>; - interrupt-parent = <&mpc5200_pic>; - - ethernet-switch@0 { - compatible = "micrel,ks8995m"; - spi-max-frequency = <1000000>; - reg = <0>; - }; - - codec@1 { - compatible = "ti,tlv320aic26"; - spi-max-frequency = <100000>; - reg = <1>; - }; - }; +This file has moved to spi-controller.yaml. diff --git a/dts/Bindings/spi/spi-controller.yaml b/dts/Bindings/spi/spi-controller.yaml new file mode 100644 index 0000000000..a02e2fe2bf --- /dev/null +++ b/dts/Bindings/spi/spi-controller.yaml @@ -0,0 +1,160 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/spi-controller.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: SPI Controller Generic Binding + +maintainers: + - Mark Brown <broonie@kernel.org> + +description: | + SPI busses can be described with a node for the SPI controller device + and a set of child nodes for each SPI slave on the bus. The system SPI + controller may be described for use in SPI master mode or in SPI slave mode, + but not for both at the same time. + +properties: + $nodename: + pattern: "^spi(@.*|-[0-9a-f])*$" + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + cs-gpios: + description: | + GPIOs used as chip selects. + If that property is used, the number of chip selects will be + increased automatically with max(cs-gpios, hardware chip selects). + + So if, for example, the controller has 2 CS lines, and the + cs-gpios looks like this + cs-gpios = <&gpio1 0 0>, <0>, <&gpio1 1 0>, <&gpio1 2 0>; + + Then it should be configured so that num_chipselect = 4, with + the following mapping + cs0 : &gpio1 0 0 + cs1 : native + cs2 : &gpio1 1 0 + cs3 : &gpio1 2 0 + + num-cs: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Total number of chip selects. + + spi-slave: + $ref: /schemas/types.yaml#/definitions/flag + description: + The SPI controller acts as a slave, instead of a master. + +patternProperties: + "^slave$": + type: object + + properties: + compatible: + description: + Compatible of the SPI device. + + required: + - compatible + + "^.*@[0-9a-f]+$": + type: object + + properties: + compatible: + description: + Compatible of the SPI device. + + reg: + minimum: 0 + maximum: 256 + description: + Chip select used by the device. + + spi-3wire: + $ref: /schemas/types.yaml#/definitions/flag + description: + The device requires 3-wire mode. + + spi-cpha: + $ref: /schemas/types.yaml#/definitions/flag + description: + The device requires shifted clock phase (CPHA) mode. + + spi-cpol: + $ref: /schemas/types.yaml#/definitions/flag + description: + The device requires inverse clock polarity (CPOL) mode. + + spi-cs-high: + $ref: /schemas/types.yaml#/definitions/flag + description: + The device requires the chip select active high. + + spi-lsb-first: + $ref: /schemas/types.yaml#/definitions/flag + description: + The device requires the LSB first mode. + + spi-max-frequency: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Maximum SPI clocking speed of the device in Hz. + + spi-rx-bus-width: + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - enum: [ 1, 2, 4 ] + - default: 1 + description: + Bus width to the SPI bus used for MISO. + + spi-rx-delay-us: + description: + Delay, in microseconds, after a read transfer. + + spi-tx-bus-width: + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - enum: [ 1, 2, 4 ] + - default: 1 + description: + Bus width to the SPI bus used for MOSI. + + spi-tx-delay-us: + description: + Delay, in microseconds, after a write transfer. + + required: + - compatible + - reg + +examples: + - | + spi@f00 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi"; + reg = <0xf00 0x20>; + interrupts = <2 13 0 2 14 0>; + interrupt-parent = <&mpc5200_pic>; + + ethernet-switch@0 { + compatible = "micrel,ks8995m"; + spi-max-frequency = <1000000>; + reg = <0>; + }; + + codec@1 { + compatible = "ti,tlv320aic26"; + spi-max-frequency = <100000>; + reg = <1>; + }; + }; diff --git a/dts/Bindings/spi/spi-gpio.txt b/dts/Bindings/spi/spi-gpio.txt deleted file mode 100644 index 52db562f17..0000000000 --- a/dts/Bindings/spi/spi-gpio.txt +++ /dev/null @@ -1,43 +0,0 @@ -SPI-GPIO devicetree bindings - -This represents a group of 3-n GPIO lines used for bit-banged SPI on dedicated -GPIO lines. - -Required properties: - - - compatible: should be set to "spi-gpio" - - #address-cells: should be set to <0x1> - - ranges - - sck-gpios: GPIO spec for the SCK line to use - - miso-gpios: GPIO spec for the MISO line to use - - mosi-gpios: GPIO spec for the MOSI line to use - - cs-gpios: GPIOs to use for chipselect lines. - Not needed if num-chipselects = <0>. - - num-chipselects: Number of chipselect lines. Should be <0> if a single device - with no chip select is connected. - -Deprecated bindings: - -These legacy GPIO line bindings can alternatively be used to define the -GPIO lines used, they should not be used in new device trees. - - - gpio-sck: GPIO spec for the SCK line to use - - gpio-miso: GPIO spec for the MISO line to use - - gpio-mosi: GPIO spec for the MOSI line to use - -Example: - - spi { - compatible = "spi-gpio"; - #address-cells = <0x1>; - ranges; - - sck-gpios = <&gpio 95 0>; - miso-gpios = <&gpio 98 0>; - mosi-gpios = <&gpio 97 0>; - cs-gpios = <&gpio 125 0>; - num-chipselects = <1>; - - /* clients */ - }; - diff --git a/dts/Bindings/spi/spi-gpio.yaml b/dts/Bindings/spi/spi-gpio.yaml new file mode 100644 index 0000000000..55c4f1705f --- /dev/null +++ b/dts/Bindings/spi/spi-gpio.yaml @@ -0,0 +1,72 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/spi-gpio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: SPI-GPIO devicetree bindings + +maintainers: + - Rob Herring <robh@kernel.org> + +description: + This represents a group of 3-n GPIO lines used for bit-banged SPI on + dedicated GPIO lines. + +allOf: + - $ref: "/schemas/spi/spi-controller.yaml#" + +properties: + compatible: + const: spi-gpio + + sck-gpios: + description: GPIO spec for the SCK line to use + maxItems: 1 + + miso-gpios: + description: GPIO spec for the MISO line to use + maxItems: 1 + + mosi-gpios: + description: GPIO spec for the MOSI line to use + maxItems: 1 + + cs-gpios: + description: GPIOs to use for chipselect lines. + Not needed if num-chipselects = <0>. + minItems: 1 + maxItems: 1024 + + num-chipselects: + description: Number of chipselect lines. Should be <0> if a single device + with no chip select is connected. + $ref: "/schemas/types.yaml#/definitions/uint32" + + # Deprecated properties + gpio-sck: false + gpio-miso: false + gpio-mosi: false + +required: + - compatible + - num-chipselects + - sck-gpios + +examples: + - | + spi { + compatible = "spi-gpio"; + #address-cells = <0x1>; + #size-cells = <0x0>; + + sck-gpios = <&gpio 95 0>; + miso-gpios = <&gpio 98 0>; + mosi-gpios = <&gpio 97 0>; + cs-gpios = <&gpio 125 0>; + num-chipselects = <1>; + + /* clients */ + }; + +... diff --git a/dts/Bindings/spi/spi-pl022.yaml b/dts/Bindings/spi/spi-pl022.yaml new file mode 100644 index 0000000000..dfb697c693 --- /dev/null +++ b/dts/Bindings/spi/spi-pl022.yaml @@ -0,0 +1,165 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/spi-pl022.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM PL022 SPI controller + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +allOf: + - $ref: "spi-controller.yaml#" + +# We need a select here so we don't match all nodes with 'arm,primecell' +select: + properties: + compatible: + contains: + const: arm,pl022 + required: + - compatible + +properties: + compatible: + items: + - const: arm,pl022 + - const: arm,primecell + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 2 + + clock-names: + items: + - enum: + - SSPCLK + - sspclk + - const: apb_pclk + + pl022,autosuspend-delay: + description: delay in ms following transfer completion before the + runtime power management system suspends the device. A setting of 0 + indicates no delay and the device will be suspended immediately. + $ref: "/schemas/types.yaml#/definitions/uint32" + + pl022,rt: + description: indicates the controller should run the message pump with realtime + priority to minimise the transfer latency on the bus (boolean) + type: boolean + + dmas: + description: + Two or more DMA channel specifiers following the convention outlined + in bindings/dma/dma.txt + minItems: 2 + maxItems: 32 + + dma-names: + description: + There must be at least one channel named "tx" for transmit and named "rx" + for receive. + minItems: 2 + maxItems: 32 + additionalItems: true + items: + - const: rx + - const: tx + +patternProperties: + "^[a-zA-Z][a-zA-Z0-9,+\\-._]{0,63}@[0-9a-f]+$": + type: object + # SPI slave nodes must be children of the SPI master node and can + # contain the following properties. + properties: + pl022,interface: + description: SPI interface type + allOf: + - $ref: "/schemas/types.yaml#/definitions/uint32" + - enum: + - 0 # SPI + - 1 # Texas Instruments Synchronous Serial Frame Format + - 2 # Microwire (Half Duplex) + + pl022,com-mode: + description: Specifies the transfer mode + allOf: + - $ref: "/schemas/types.yaml#/definitions/uint32" + - enum: + - 0 # interrupt mode + - 1 # polling mode + - 2 # DMA mode + default: 1 + + pl022,rx-level-trig: + description: Rx FIFO watermark level + allOf: + - $ref: "/schemas/types.yaml#/definitions/uint32" + - minimum: 0 + maximum: 4 + + pl022,tx-level-trig: + description: Tx FIFO watermark level + allOf: + - $ref: "/schemas/types.yaml#/definitions/uint32" + - minimum: 0 + maximum: 4 + + pl022,ctrl-len: + description: Microwire interface - Control length + allOf: + - $ref: "/schemas/types.yaml#/definitions/uint32" + - minimum: 0x03 + maximum: 0x1f + + pl022,wait-state: + description: Microwire interface - Wait state + allOf: + - $ref: "/schemas/types.yaml#/definitions/uint32" + - enum: [ 0, 1 ] + + pl022,duplex: + description: Microwire interface - Full/Half duplex + allOf: + - $ref: "/schemas/types.yaml#/definitions/uint32" + - enum: [ 0, 1 ] + +required: + - compatible + - reg + - interrupts + +examples: + - | + spi@e0100000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0xe0100000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 31 0x4>; + dmas = <&dma_controller 23 1>, + <&dma_controller 24 0>; + dma-names = "rx", "tx"; + + m25p80@1 { + compatible = "st,m25p80"; + reg = <1>; + spi-max-frequency = <12000000>; + spi-cpol; + spi-cpha; + pl022,interface = <0>; + pl022,com-mode = <0x2>; + pl022,rx-level-trig = <0>; + pl022,tx-level-trig = <0>; + pl022,ctrl-len = <0x11>; + pl022,wait-state = <0>; + pl022,duplex = <0>; + }; + }; +... diff --git a/dts/Bindings/spi/spi-stm32-qspi.txt b/dts/Bindings/spi/spi-stm32-qspi.txt index adeeb63e84..bfc038b947 100644 --- a/dts/Bindings/spi/spi-stm32-qspi.txt +++ b/dts/Bindings/spi/spi-stm32-qspi.txt @@ -19,8 +19,11 @@ Required properties: - reg: chip-Select number (QSPI controller may connect 2 flashes) - spi-max-frequency: max frequency of spi bus -Optional property: +Optional properties: - spi-rx-bus-width: see ./spi-bus.txt for the description +- dmas: DMA specifiers for tx and rx dma. See the DMA client binding, +Documentation/devicetree/bindings/dma/dma.txt. +- dma-names: DMA request names should include "tx" and "rx" if present. Example: diff --git a/dts/Bindings/spi/spi-sun4i.txt b/dts/Bindings/spi/spi-sun4i.txt deleted file mode 100644 index c75d604a82..0000000000 --- a/dts/Bindings/spi/spi-sun4i.txt +++ /dev/null @@ -1,23 +0,0 @@ -Allwinner A10 SPI controller - -Required properties: -- compatible: Should be "allwinner,sun4-a10-spi". -- reg: Should contain register location and length. -- interrupts: Should contain interrupt. -- clocks: phandle to the clocks feeding the SPI controller. Two are - needed: - - "ahb": the gated AHB parent clock - - "mod": the parent module clock -- clock-names: Must contain the clock names described just above - -Example: - -spi1: spi@1c06000 { - compatible = "allwinner,sun4i-a10-spi"; - reg = <0x01c06000 0x1000>; - interrupts = <11>; - clocks = <&ahb_gates 21>, <&spi1_clk>; - clock-names = "ahb", "mod"; - #address-cells = <1>; - #size-cells = <0>; -}; diff --git a/dts/Bindings/spi/spi-sun6i.txt b/dts/Bindings/spi/spi-sun6i.txt deleted file mode 100644 index 435a8e0731..0000000000 --- a/dts/Bindings/spi/spi-sun6i.txt +++ /dev/null @@ -1,44 +0,0 @@ -Allwinner A31/H3 SPI controller - -Required properties: -- compatible: Should be "allwinner,sun6i-a31-spi" or "allwinner,sun8i-h3-spi". -- reg: Should contain register location and length. -- interrupts: Should contain interrupt. -- clocks: phandle to the clocks feeding the SPI controller. Two are - needed: - - "ahb": the gated AHB parent clock - - "mod": the parent module clock -- clock-names: Must contain the clock names described just above -- resets: phandle to the reset controller asserting this device in - reset - -Optional properties: -- dmas: DMA specifiers for rx and tx dma. See the DMA client binding, - Documentation/devicetree/bindings/dma/dma.txt -- dma-names: DMA request names should include "rx" and "tx" if present. - -Example: - -spi1: spi@1c69000 { - compatible = "allwinner,sun6i-a31-spi"; - reg = <0x01c69000 0x1000>; - interrupts = <0 66 4>; - clocks = <&ahb1_gates 21>, <&spi1_clk>; - clock-names = "ahb", "mod"; - resets = <&ahb1_rst 21>; -}; - -spi0: spi@1c68000 { - compatible = "allwinner,sun8i-h3-spi"; - reg = <0x01c68000 0x1000>; - interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>; - clock-names = "ahb", "mod"; - dmas = <&dma 23>, <&dma 23>; - dma-names = "rx", "tx"; - pinctrl-names = "default"; - pinctrl-0 = <&spi0_pins>; - resets = <&ccu RST_BUS_SPI0>; - #address-cells = <1>; - #size-cells = <0>; -}; diff --git a/dts/Bindings/spi/spi-synquacer.txt b/dts/Bindings/spi/spi-synquacer.txt new file mode 100644 index 0000000000..291dfa692d --- /dev/null +++ b/dts/Bindings/spi/spi-synquacer.txt @@ -0,0 +1,27 @@ +* Socionext Synquacer HS-SPI bindings + +Required Properties: +- compatible: should be "socionext,synquacer-spi" +- reg: physical base address of the controller and length of memory mapped + region. +- interrupts: should contain the "spi_rx", "spi_tx" and "spi_fault" interrupts. +- clocks: core clock iHCLK. Optional rate clock iPCLK (default is iHCLK) +- clock-names: Shall be "iHCLK" and "iPCLK" respectively + +Optional Properties: +- socionext,use-rtm: boolean, if required to use "retimed clock" for RX +- socionext,set-aces: boolean, if same active clock edges field to be set. + +Example: + + spi0: spi@ff110000 { + compatible = "socionext,synquacer-spi"; + reg = <0xff110000 0x1000>; + interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_hsspi>; + clock-names = "iHCLK"; + socionext,use-rtm; + socionext,set-aces; + }; diff --git a/dts/Bindings/spi/spi_pl022.txt b/dts/Bindings/spi/spi_pl022.txt deleted file mode 100644 index 7638b4968d..0000000000 --- a/dts/Bindings/spi/spi_pl022.txt +++ /dev/null @@ -1,70 +0,0 @@ -ARM PL022 SPI controller - -Required properties: -- compatible : "arm,pl022", "arm,primecell" -- reg : Offset and length of the register set for the device -- interrupts : Should contain SPI controller interrupt -- num-cs : total number of chipselects - -Optional properties: -- cs-gpios : should specify GPIOs used for chipselects. - The gpios will be referred to as reg = <index> in the SPI child nodes. - If unspecified, a single SPI device without a chip select can be used. -- pl022,autosuspend-delay : delay in ms following transfer completion before - the runtime power management system suspends the - device. A setting of 0 indicates no delay and the - device will be suspended immediately -- pl022,rt : indicates the controller should run the message pump with realtime - priority to minimise the transfer latency on the bus (boolean) -- dmas : Two or more DMA channel specifiers following the convention outlined - in bindings/dma/dma.txt -- dma-names: Names for the dma channels, if present. There must be at - least one channel named "tx" for transmit and named "rx" for - receive. - - -SPI slave nodes must be children of the SPI master node and can -contain the following properties. - -- pl022,interface : interface type: - 0: SPI - 1: Texas Instruments Synchronous Serial Frame Format - 2: Microwire (Half Duplex) -- pl022,com-mode : specifies the transfer mode: - 0: interrupt mode - 1: polling mode (default mode if property not present) - 2: DMA mode -- pl022,rx-level-trig : Rx FIFO watermark level -- pl022,tx-level-trig : Tx FIFO watermark level -- pl022,ctrl-len : Microwire interface: Control length -- pl022,wait-state : Microwire interface: Wait state -- pl022,duplex : Microwire interface: Full/Half duplex - - -Example: - - spi@e0100000 { - compatible = "arm,pl022", "arm,primecell"; - reg = <0xe0100000 0x1000>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <0 31 0x4>; - dmas = <&dma-controller 23 1>, - <&dma-controller 24 0>; - dma-names = "rx", "tx"; - - m25p80@1 { - compatible = "st,m25p80"; - reg = <1>; - spi-max-frequency = <12000000>; - spi-cpol; - spi-cpha; - pl022,interface = <0>; - pl022,com-mode = <0x2>; - pl022,rx-level-trig = <0>; - pl022,tx-level-trig = <0>; - pl022,ctrl-len = <0x11>; - pl022,wait-state = <0>; - pl022,duplex = <0>; - }; - }; diff --git a/dts/Bindings/timer/intel,ixp4xx-timer.yaml b/dts/Bindings/timer/intel,ixp4xx-timer.yaml index a36a0746c0..2807225db9 100644 --- a/dts/Bindings/timer/intel,ixp4xx-timer.yaml +++ b/dts/Bindings/timer/intel,ixp4xx-timer.yaml @@ -2,7 +2,7 @@ # Copyright 2018 Linaro Ltd. %YAML 1.2 --- -$id: "http://devicetree.org/schemas/timer/intel-ixp4xx-timer.yaml#" +$id: "http://devicetree.org/schemas/timer/intel,ixp4xx-timer.yaml#" $schema: "http://devicetree.org/meta-schemas/core.yaml#" title: Intel IXP4xx XScale Networking Processors Timers diff --git a/dts/Bindings/timer/nxp,sysctr-timer.txt b/dts/Bindings/timer/nxp,sysctr-timer.txt new file mode 100644 index 0000000000..d57659996d --- /dev/null +++ b/dts/Bindings/timer/nxp,sysctr-timer.txt @@ -0,0 +1,25 @@ +NXP System Counter Module(sys_ctr) + +The system counter(sys_ctr) is a programmable system counter which provides +a shared time base to Cortex A15, A7, A53, A73, etc. it is intended for use in +applications where the counter is always powered and support multiple, +unrelated clocks. The compare frame inside can be used for timer purpose. + +Required properties: + +- compatible : should be "nxp,sysctr-timer" +- reg : Specifies the base physical address and size of the comapre + frame and the counter control, read & compare. +- interrupts : should be the first compare frames' interrupt +- clocks : Specifies the counter clock. +- clock-names: Specifies the clock's name of this module + +Example: + + system_counter: timer@306a0000 { + compatible = "nxp,sysctr-timer"; + reg = <0x306a0000 0x20000>;/* system-counter-rd & compare */ + clocks = <&clk_8m>; + clock-names = "per"; + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; + }; diff --git a/dts/Bindings/timer/renesas,cmt.txt b/dts/Bindings/timer/renesas,cmt.txt index c0594450e9..c5220bcd85 100644 --- a/dts/Bindings/timer/renesas,cmt.txt +++ b/dts/Bindings/timer/renesas,cmt.txt @@ -42,12 +42,18 @@ Required Properties: - "renesas,r8a7793-cmt1" for the 48-bit CMT1 device included in r8a7793. - "renesas,r8a7794-cmt0" for the 32-bit CMT0 device included in r8a7794. - "renesas,r8a7794-cmt1" for the 48-bit CMT1 device included in r8a7794. + - "renesas,r8a7795-cmt0" for the 32-bit CMT0 device included in r8a7795. + - "renesas,r8a7795-cmt1" for the 48-bit CMT1 device included in r8a7795. - "renesas,r8a7796-cmt0" for the 32-bit CMT0 device included in r8a7796. - "renesas,r8a7796-cmt1" for the 48-bit CMT1 device included in r8a7796. + - "renesas,r8a77965-cmt0" for the 32-bit CMT0 device included in r8a77965. + - "renesas,r8a77965-cmt1" for the 48-bit CMT1 device included in r8a77965. - "renesas,r8a77970-cmt0" for the 32-bit CMT0 device included in r8a77970. - "renesas,r8a77970-cmt1" for the 48-bit CMT1 device included in r8a77970. - "renesas,r8a77980-cmt0" for the 32-bit CMT0 device included in r8a77980. - "renesas,r8a77980-cmt1" for the 48-bit CMT1 device included in r8a77980. + - "renesas,r8a77990-cmt0" for the 32-bit CMT0 device included in r8a77990. + - "renesas,r8a77990-cmt1" for the 48-bit CMT1 device included in r8a77990. - "renesas,rcar-gen2-cmt0" for 32-bit CMT0 devices included in R-Car Gen2 and RZ/G1. diff --git a/dts/Bindings/trivial-devices.yaml b/dts/Bindings/trivial-devices.yaml index 747fd3f689..2e742d399e 100644 --- a/dts/Bindings/trivial-devices.yaml +++ b/dts/Bindings/trivial-devices.yaml @@ -52,6 +52,10 @@ properties: - at,24c08 # i2c trusted platform module (TPM) - atmel,at97sc3204t + # i2c h/w symmetric crypto module + - atmel,atsha204a + # i2c h/w elliptic curve crypto module + - atmel,atecc508a # CM32181: Ambient Light Sensor - capella,cm32181 # CM3232: Ambient Light Sensor diff --git a/dts/Bindings/usb/dwc2.txt b/dts/Bindings/usb/dwc2.txt index 49eac0dc86..aafff3a690 100644 --- a/dts/Bindings/usb/dwc2.txt +++ b/dts/Bindings/usb/dwc2.txt @@ -42,6 +42,8 @@ Refer to phy/phy-bindings.txt for generic phy consumer properties - g-rx-fifo-size: size of rx fifo size in gadget mode. - g-np-tx-fifo-size: size of non-periodic tx fifo size in gadget mode. - g-tx-fifo-size: size of periodic tx fifo per endpoint (except ep0) in gadget mode. +- snps,need-phy-for-wake: If present indicates that the phy needs to be left + on for remote wakeup during suspend. - snps,reset-phy-on-wake: If present indicates that we need to reset the PHY when we detect a wakeup. This is due to a hardware errata. @@ -58,4 +60,5 @@ Example: clock-names = "otg"; phys = <&usbphy>; phy-names = "usb2-phy"; + snps,need-phy-for-wake; }; diff --git a/dts/Bindings/usb/dwc3.txt b/dts/Bindings/usb/dwc3.txt index 8e5265e9f6..66780a47ad 100644 --- a/dts/Bindings/usb/dwc3.txt +++ b/dts/Bindings/usb/dwc3.txt @@ -64,6 +64,8 @@ Optional properties: - snps,dis_u2_susphy_quirk: when set core will disable USB2 suspend phy. - snps,dis_enblslpm_quirk: when set clears the enblslpm in GUSB2PHYCFG, disabling the suspend signal to the PHY. + - snps,dis-u1-entry-quirk: set if link entering into U1 needs to be disabled. + - snps,dis-u2-entry-quirk: set if link entering into U2 needs to be disabled. - snps,dis_rxdet_inp3_quirk: when set core will disable receiver detection in PHY P3 power state. - snps,dis-u2-freeclk-exists-quirk: when set, clear the u2_freeclk_exists diff --git a/dts/Bindings/usb/generic-ehci.yaml b/dts/Bindings/usb/generic-ehci.yaml index d3b4f64159..059f6ef1ad 100644 --- a/dts/Bindings/usb/generic-ehci.yaml +++ b/dts/Bindings/usb/generic-ehci.yaml @@ -74,7 +74,7 @@ additionalProperties: false examples: - | - ehci@e0000300 { + usb@e0000300 { compatible = "ibm,usb-ehci-440epx", "generic-ehci"; interrupt-parent = <&UIC0>; interrupts = <0x1a 4>; @@ -89,7 +89,6 @@ examples: interrupts = <39>; clocks = <&ahb_gates 1>; phys = <&usbphy 1>; - phy-names = "usb"; }; ... diff --git a/dts/Bindings/usb/renesas_usb3.txt b/dts/Bindings/usb/renesas,usb3.txt index 35039e7205..35039e7205 100644 --- a/dts/Bindings/usb/renesas_usb3.txt +++ b/dts/Bindings/usb/renesas,usb3.txt diff --git a/dts/Bindings/usb/renesas_usbhs.txt b/dts/Bindings/usb/renesas,usbhs.txt index b8acc2a994..e39255ea6e 100644 --- a/dts/Bindings/usb/renesas_usbhs.txt +++ b/dts/Bindings/usb/renesas,usbhs.txt @@ -20,9 +20,11 @@ Required properties: - "renesas,usbhs-r8a77990" for r8a77990 (R-Car E3) compatible device - "renesas,usbhs-r8a77995" for r8a77995 (R-Car D3) compatible device - "renesas,usbhs-r7s72100" for r7s72100 (RZ/A1) compatible device + - "renesas,usbhs-r7s9210" for r7s9210 (RZ/A2) compatible device - "renesas,rcar-gen2-usbhs" for R-Car Gen2 or RZ/G1 compatible devices - "renesas,rcar-gen3-usbhs" for R-Car Gen3 or RZ/G2 compatible devices - "renesas,rza1-usbhs" for RZ/A1 compatible device + - "renesas,rza2-usbhs" for RZ/A2 compatible device When compatible with the generic version, nodes must list the SoC-specific version corresponding to the platform first followed diff --git a/dts/Bindings/usb/s3c2410-usb.txt b/dts/Bindings/usb/s3c2410-usb.txt index e45b38ce29..26c85afd0b 100644 --- a/dts/Bindings/usb/s3c2410-usb.txt +++ b/dts/Bindings/usb/s3c2410-usb.txt @@ -4,7 +4,7 @@ OHCI Required properties: - compatible: should be "samsung,s3c2410-ohci" for USB host controller - - reg: address and lenght of the controller memory mapped region + - reg: address and length of the controller memory mapped region - interrupts: interrupt number for the USB OHCI controller - clocks: Should reference the bus and host clocks - clock-names: Should contain two strings diff --git a/dts/Bindings/usb/usb251xb.txt b/dts/Bindings/usb/usb251xb.txt index bc7945e9db..17915f64b8 100644 --- a/dts/Bindings/usb/usb251xb.txt +++ b/dts/Bindings/usb/usb251xb.txt @@ -64,10 +64,8 @@ Optional properties : - power-on-time-ms : Specifies the time it takes from the time the host initiates the power-on sequence to a port until the port has adequate power. The value is given in ms in a 0 - 510 range (default is 100ms). - - swap-dx-lanes : Specifies the downstream ports which will swap the - differential-pair (D+/D-), default is not-swapped. - - swap-us-lanes : Selects the upstream port differential-pair (D+/D-) - swapping (boolean, default is not-swapped) + - swap-dx-lanes : Specifies the ports which will swap the differential-pair + (D+/D-), default is not-swapped. Examples: usb2512b@2c { diff --git a/dts/Bindings/vendor-prefixes.yaml b/dts/Bindings/vendor-prefixes.yaml index 33a65a45e3..6992bbbbff 100644 --- a/dts/Bindings/vendor-prefixes.yaml +++ b/dts/Bindings/vendor-prefixes.yaml @@ -49,6 +49,8 @@ patternProperties: description: Aeroflex Gaisler AB "^al,.*": description: Annapurna Labs + "^allegro,.*": + description: Allegro DVT "^allo,.*": description: Allo.com "^allwinner,.*": @@ -147,6 +149,8 @@ patternProperties: description: Broadcom Corporation "^buffalo,.*": description: Buffalo, Inc. + "^bur,.*": + description: B&R Industrial Automation GmbH "^bticino,.*": description: Bticino International "^calxeda,.*": @@ -175,6 +179,8 @@ patternProperties: description: Common Hardware Reference Platform "^chunghwa,.*": description: Chunghwa Picture Tubes Ltd. + "^chuwi,.*": + description: Chuwi Innovation Ltd. "^ciaa,.*": description: Computadora Industrial Abierta Argentina "^cirrus,.*": @@ -185,8 +191,12 @@ patternProperties: description: Chips&Media, Inc. "^cnxt,.*": description: Conexant Systems, Inc. + "^colorfly,.*": + description: Colorful GRP, Shenzhen Xueyushi Technology Ltd. "^compulab,.*": description: CompuLab Ltd. + "^corpro,.*": + description: Chengdu Corpro Technology Co., Ltd. "^cortina,.*": description: Cortina Systems, Inc. "^cosmic,.*": @@ -199,6 +209,8 @@ patternProperties: description: Crystalfontz America, Inc. "^csky,.*": description: Hangzhou C-SKY Microsystems Co., Ltd + "^csq,.*": + description: Shenzen Chuangsiqi Technology Co.,Ltd. "^cubietech,.*": description: Cubietech, Ltd. "^cypress,.*": @@ -219,6 +231,8 @@ patternProperties: description: Devantech, Ltd. "^dh,.*": description: DH electronics GmbH + "^difrnce,.*": + description: Shenzhen Yagu Electronic Technology Co., Ltd. "^digi,.*": description: Digi International Inc. "^digilent,.*": @@ -241,6 +255,8 @@ patternProperties: description: DPTechnics "^dragino,.*": description: Dragino Technology Co., Limited + "^dserve,.*": + description: dServe Technology B.V. "^ea,.*": description: Embedded Artists AB "^ebs-systart,.*": @@ -263,6 +279,8 @@ patternProperties: description: Emlid, Ltd. "^emmicro,.*": description: EM Microelectronic + "^empire-electronix,.*": + description: Empire Electronix "^emtrion,.*": description: emtrion GmbH "^endless,.*": @@ -277,6 +295,8 @@ patternProperties: description: Ecole Polytechnique Fédérale de Lausanne "^epson,.*": description: Seiko Epson Corp. + "^esp,.*": + description: Espressif Systems Co. Ltd. "^est,.*": description: ESTeem Wireless Modems "^ettus,.*": @@ -287,6 +307,8 @@ patternProperties: description: Everest Semiconductor Co. Ltd. "^everspin,.*": description: Everspin Technologies, Inc. + "^evervision,.*": + description: Evervision Electronics Co. Ltd. "^exar,.*": description: Exar Corporation "^excito,.*": @@ -327,6 +349,8 @@ patternProperties: description: GE Fanuc Intelligent Platforms Embedded Systems, Inc. "^GEFanuc,.*": description: GE Fanuc Intelligent Platforms Embedded Systems, Inc. + "^gemei,.*": + description: Gemei Digital Technology Co., Ltd. "^geniatech,.*": description: Geniatech, Inc. "^giantec,.*": @@ -371,12 +395,20 @@ patternProperties: description: Holt Integrated Circuits, Inc. "^honeywell,.*": description: Honeywell + "^hoperun,.*": + description: Jiangsu HopeRun Software Co., Ltd. "^hp,.*": description: Hewlett Packard + "^hsg,.*": + description: HannStar Display Co. "^holtek,.*": description: Holtek Semiconductor, Inc. + "^hugsun,.*": + description: Shenzhen Hugsun Technology Co. Ltd. "^hwacom,.*": description: HwaCom Systems Inc. + "^hyundai,.*": + description: Hyundai Technology "^i2se,.*": description: I2SE GmbH "^ibm,.*": @@ -391,6 +423,10 @@ patternProperties: description: ILI Technology Corporation (ILITEK) "^img,.*": description: Imagination Technologies Ltd. + "^incircuit,.*": + description: In-Circuit GmbH + "^inet-tek,.*": + description: Shenzhen iNet Mobile Internet Technology Co., Ltd "^infineon,.*": description: Infineon Technologies "^inforce,.*": @@ -425,6 +461,8 @@ patternProperties: description: Japan Display Inc. "^jedec,.*": description: JEDEC Solid State Technology Association + "^jesurun,.*": + description: Shenzhen Jesurun Electronics Business Dept. "^jianda,.*": description: Jiandangjing Technology Co., Ltd. "^karo,.*": @@ -449,6 +487,8 @@ patternProperties: description: Rakuten Kobo Inc. "^koe,.*": description: Kaohsiung Opto-Electronics Inc. + "^kontron,.*": + description: Kontron S&T AG "^kosagi,.*": description: Sutajio Ko-Usagi PTE Ltd. "^kyo,.*": @@ -457,6 +497,8 @@ patternProperties: description: LaCie "^laird,.*": description: Laird PLC + "^lamobo,.*": + description: Ketai Huajie Technology Co., Ltd. "^lantiq,.*": description: Lantiq Semiconductor "^lattice,.*": @@ -475,6 +517,8 @@ patternProperties: description: Lichee Pi "^linaro,.*": description: Linaro Limited + "^linksprite,.*": + description: LinkSprite Technologies, Inc. "^linksys,.*": description: Belkin International, Inc. (Linksys) "^linux,.*": @@ -491,6 +535,8 @@ patternProperties: description: Liebherr-Werk Nenzing GmbH "^macnica,.*": description: Macnica Americas + "^mapleboard,.*": + description: Mapleboard.org "^marvell,.*": description: Marvell Technology Group Ltd. "^maxbotix,.*": @@ -531,6 +577,8 @@ patternProperties: description: Micron Technology Inc. "^mikroe,.*": description: MikroElektronika d.o.o. + "^miniand,.*": + description: Miniand Tech "^minix,.*": description: MINIX Technology Ltd. "^miramems,.*": @@ -661,28 +709,38 @@ patternProperties: description: Picochip Ltd "^pine64,.*": description: Pine64 + "^pineriver,.*": + description: Shenzhen PineRiver Designs Co., Ltd. "^pixcir,.*": description: PIXCIR MICROELECTRONICS Co., Ltd "^plantower,.*": description: Plantower Co., Ltd "^plathome,.*": - description: Plat'Home Co., Ltd. + description: Plat\'Home Co., Ltd. "^plda,.*": description: PLDA "^plx,.*": description: Broadcom Corporation (formerly PLX Technology) "^pni,.*": description: PNI Sensor Corporation + "^polaroid,.*": + description: Polaroid Corporation "^portwell,.*": description: Portwell Inc. "^poslab,.*": description: Poslab Technology Co., Ltd. + "^pov,.*": + description: Point of View International B.V. "^powervr,.*": description: PowerVR (deprecated, use img) + "^primux,.*": + description: Primux Trading, S.L. "^probox2,.*": description: PROBOX2 (by W2COMP Co., Ltd.) "^pulsedlight,.*": description: PulsedLight, Inc + "^purism,.*": + description: Purism, SPC "^qca,.*": description: Qualcomm Atheros, Inc. "^qcom,.*": @@ -691,6 +749,8 @@ patternProperties: description: QEMU, a generic and open source machine emulator and virtualizer "^qi,.*": description: Qi Hardware + "^qihua,.*": + description: Chengdu Kaixuan Information Technology Co., Ltd. "^qiaodian,.*": description: QiaoDian XianShi Corporation "^qnap,.*": @@ -713,6 +773,8 @@ patternProperties: description: Realtek Semiconductor Corp. "^renesas,.*": description: Renesas Electronics Corporation + "^rervision,.*": + description: Shenzhen Rervision Technology Co., Ltd. "^richtek,.*": description: Richtek Technology Corporation "^ricoh,.*": @@ -781,8 +843,14 @@ patternProperties: description: Silergy Corp. "^siliconmitus,.*": description: Silicon Mitus, Inc. - "^simte,.*": - description: k + "^simtek,.*": + description: Cypress Semiconductor Corporation (Simtek Corporation) + "^sinlinx,.*": + description: Sinlinx Electronics Technology Co., LTD + "^sinovoip,.*": + description: SinoVoip Co., Ltd + "^sipeed,.*": + description: Shenzhen Sipeed Technology Co., Ltd. "^sirf,.*": description: SiRF Technology, Inc. "^sis,.*": @@ -795,6 +863,8 @@ patternProperties: description: Standard Microsystems Corporation "^snps,.*": description: Synopsys, Inc. + "^sochip,.*": + description: Shenzhen SoChip Technology Co., Ltd. "^socionext,.*": description: Socionext Inc. "^solidrun,.*": @@ -849,6 +919,8 @@ patternProperties: description: Shenzhen Techstar Electronics Co., Ltd. "^terasic,.*": description: Terasic Inc. + "^tfc,.*": + description: Three Five Corp "^thine,.*": description: THine Electronics, Inc. "^ti,.*": @@ -901,6 +973,8 @@ patternProperties: description: United Radiant Technology Corporation "^usi,.*": description: Universal Scientific Industrial Co., Ltd. + "^utoo,.*": + description: Aigo Digital Technology Co., Ltd. "^v3,.*": description: V3 Semiconductor "^vamrs,.*": @@ -923,6 +997,8 @@ patternProperties: description: Voipac Technologies s.r.o. "^vot,.*": description: Vision Optical Technology Co., Ltd. + "^vxt,.*": + description: VXT Ltd "^wd,.*": description: Western Digital Corp. "^wetek,.*": @@ -937,10 +1013,14 @@ patternProperties: description: Winbond Electronics corp. "^winstar,.*": description: Winstar Display Corp. + "^wits,.*": + description: Shenzhen Merrii Technology Co., Ltd. (WITS) "^wlf,.*": description: Wolfson Microelectronics "^wm,.*": description: Wondermedia Technologies, Inc. + "^wobo,.*": + description: Wobo "^x-powers,.*": description: X-Powers "^xes,.*": @@ -951,6 +1031,8 @@ patternProperties: description: Xilinx "^xunlong,.*": description: Shenzhen Xunlong Software CO.,Limited + "^yones-toptech,.*": + description: Yones Toptech Co., Ltd. "^ysoft,.*": description: Y Soft Corporation a.s. "^zarlink,.*": @@ -968,7 +1050,7 @@ patternProperties: # Normal property name match without a comma # These should catch all node/property names without a prefix - "^[a-zA-Z0-9#][a-zA-Z0-9+\\-._@]{0,63}$": true + "^[a-zA-Z0-9#_][a-zA-Z0-9+\\-._@]{0,63}$": true "^[a-zA-Z0-9+\\-._]*@[0-9a-zA-Z,]*$": true "^#.*": true diff --git a/dts/Bindings/virtio/iommu.txt b/dts/Bindings/virtio/iommu.txt new file mode 100644 index 0000000000..2407fea065 --- /dev/null +++ b/dts/Bindings/virtio/iommu.txt @@ -0,0 +1,66 @@ +* virtio IOMMU PCI device + +When virtio-iommu uses the PCI transport, its programming interface is +discovered dynamically by the PCI probing infrastructure. However the +device tree statically describes the relation between IOMMU and DMA +masters. Therefore, the PCI root complex that hosts the virtio-iommu +contains a child node representing the IOMMU device explicitly. + +Required properties: + +- compatible: Should be "virtio,pci-iommu" +- reg: PCI address of the IOMMU. As defined in the PCI Bus + Binding reference [1], the reg property is a five-cell + address encoded as (phys.hi phys.mid phys.lo size.hi + size.lo). phys.hi should contain the device's BDF as + 0b00000000 bbbbbbbb dddddfff 00000000. The other cells + should be zero. +- #iommu-cells: Each platform DMA master managed by the IOMMU is assigned + an endpoint ID, described by the "iommus" property [2]. + For virtio-iommu, #iommu-cells must be 1. + +Notes: + +- DMA from the IOMMU device isn't managed by another IOMMU. Therefore the + virtio-iommu node doesn't have an "iommus" property, and is omitted from + the iommu-map property of the root complex. + +Example: + +pcie@10000000 { + compatible = "pci-host-ecam-generic"; + ... + + /* The IOMMU programming interface uses slot 00:01.0 */ + iommu0: iommu@0008 { + compatible = "virtio,pci-iommu"; + reg = <0x00000800 0 0 0 0>; + #iommu-cells = <1>; + }; + + /* + * The IOMMU manages all functions in this PCI domain except + * itself. Omit BDF 00:01.0. + */ + iommu-map = <0x0 &iommu0 0x0 0x8> + <0x9 &iommu0 0x9 0xfff7>; +}; + +pcie@20000000 { + compatible = "pci-host-ecam-generic"; + ... + /* + * The IOMMU also manages all functions from this domain, + * with endpoint IDs 0x10000 - 0x1ffff + */ + iommu-map = <0x0 &iommu0 0x10000 0x10000>; +}; + +ethernet@fe001000 { + ... + /* The IOMMU manages this platform device with endpoint ID 0x20000 */ + iommus = <&iommu0 0x20000>; +}; + +[1] Documentation/devicetree/bindings/pci/pci.txt +[2] Documentation/devicetree/bindings/iommu/iommu.txt diff --git a/dts/Bindings/virtio/mmio.txt b/dts/Bindings/virtio/mmio.txt index 5069c1b8e1..21af30fbb8 100644 --- a/dts/Bindings/virtio/mmio.txt +++ b/dts/Bindings/virtio/mmio.txt @@ -8,10 +8,40 @@ Required properties: - reg: control registers base address and size including configuration space - interrupts: interrupt generated by the device +Required properties for virtio-iommu: + +- #iommu-cells: When the node corresponds to a virtio-iommu device, it is + linked to DMA masters using the "iommus" or "iommu-map" + properties [1][2]. #iommu-cells specifies the size of the + "iommus" property. For virtio-iommu #iommu-cells must be + 1, each cell describing a single endpoint ID. + +Optional properties: + +- iommus: If the device accesses memory through an IOMMU, it should + have an "iommus" property [1]. Since virtio-iommu itself + does not access memory through an IOMMU, the "virtio,mmio" + node cannot have both an "#iommu-cells" and an "iommus" + property. + Example: virtio_block@3000 { compatible = "virtio,mmio"; reg = <0x3000 0x100>; interrupts = <41>; + + /* Device has endpoint ID 23 */ + iommus = <&viommu 23> } + + viommu: iommu@3100 { + compatible = "virtio,mmio"; + reg = <0x3100 0x100>; + interrupts = <42>; + + #iommu-cells = <1> + } + +[1] Documentation/devicetree/bindings/iommu/iommu.txt +[2] Documentation/devicetree/bindings/pci/pci-iommu.txt diff --git a/dts/Bindings/watchdog/fsl-imx-sc-wdt.txt b/dts/Bindings/watchdog/fsl-imx-sc-wdt.txt deleted file mode 100644 index 02b87e92ae..0000000000 --- a/dts/Bindings/watchdog/fsl-imx-sc-wdt.txt +++ /dev/null @@ -1,24 +0,0 @@ -* Freescale i.MX System Controller Watchdog - -i.MX system controller watchdog is for i.MX SoCs with system controller inside, -the watchdog is managed by system controller, users can ONLY communicate with -system controller from secure mode for watchdog operations, so Linux i.MX system -controller watchdog driver will call ARM SMC API and trap into ARM-Trusted-Firmware -for watchdog operations, ARM-Trusted-Firmware is running at secure EL3 mode and -it will request system controller to execute the watchdog operation passed from -Linux kernel. - -Required properties: -- compatible: Should be : - "fsl,imx8qxp-sc-wdt" - followed by "fsl,imx-sc-wdt"; - -Optional properties: -- timeout-sec : Contains the watchdog timeout in seconds. - -Examples: - -watchdog { - compatible = "fsl,imx8qxp-sc-wdt", "fsl,imx-sc-wdt"; - timeout-sec = <60>; -}; diff --git a/dts/Bindings/watchdog/renesas-wdt.txt b/dts/Bindings/watchdog/renesas,wdt.txt index 9f365c1a33..9f365c1a33 100644 --- a/dts/Bindings/watchdog/renesas-wdt.txt +++ b/dts/Bindings/watchdog/renesas,wdt.txt diff --git a/dts/Bindings/watchdog/sunxi-wdt.txt b/dts/Bindings/watchdog/sunxi-wdt.txt index 46055254e8..e65198d82a 100644 --- a/dts/Bindings/watchdog/sunxi-wdt.txt +++ b/dts/Bindings/watchdog/sunxi-wdt.txt @@ -6,6 +6,7 @@ Required properties: "allwinner,sun4i-a10-wdt" "allwinner,sun6i-a31-wdt" "allwinner,sun50i-a64-wdt","allwinner,sun6i-a31-wdt" + "allwinner,sun50i-h6-wdt","allwinner,sun6i-a31-wdt" "allwinner,suniv-f1c100s-wdt", "allwinner,sun4i-a10-wdt" - reg : Specifies base physical address and size of the registers. diff --git a/dts/include/dt-bindings/clock/exynos4.h b/dts/include/dt-bindings/clock/exynos4.h index a0439ce8e8..88ec3968b9 100644 --- a/dts/include/dt-bindings/clock/exynos4.h +++ b/dts/include/dt-bindings/clock/exynos4.h @@ -187,6 +187,7 @@ #define CLK_MIPI_HSI 349 /* Exynos4210 only */ #define CLK_PIXELASYNCM0 351 #define CLK_PIXELASYNCM1 352 +#define CLK_ASYNC_G3D 353 /* Exynos4x12 only */ #define CLK_PWM_ISP_SCLK 379 /* Exynos4x12 only */ #define CLK_SPI0_ISP_SCLK 380 /* Exynos4x12 only */ #define CLK_SPI1_ISP_SCLK 381 /* Exynos4x12 only */ diff --git a/dts/include/dt-bindings/clock/exynos5420.h b/dts/include/dt-bindings/clock/exynos5420.h index 355f469943..02d5ac469a 100644 --- a/dts/include/dt-bindings/clock/exynos5420.h +++ b/dts/include/dt-bindings/clock/exynos5420.h @@ -60,6 +60,7 @@ #define CLK_MAU_EPLL 159 #define CLK_SCLK_HSIC_12M 160 #define CLK_SCLK_MPHY_IXTAL24 161 +#define CLK_SCLK_BPLL 162 /* gate clocks */ #define CLK_UART0 257 @@ -195,6 +196,16 @@ #define CLK_ACLK432_CAM 518 #define CLK_ACLK_FL1550_CAM 519 #define CLK_ACLK550_CAM 520 +#define CLK_CLKM_PHY0 521 +#define CLK_CLKM_PHY1 522 +#define CLK_ACLK_PPMU_DREX0_0 523 +#define CLK_ACLK_PPMU_DREX0_1 524 +#define CLK_ACLK_PPMU_DREX1_0 525 +#define CLK_ACLK_PPMU_DREX1_1 526 +#define CLK_PCLK_PPMU_DREX0_0 527 +#define CLK_PCLK_PPMU_DREX0_1 528 +#define CLK_PCLK_PPMU_DREX1_0 529 +#define CLK_PCLK_PPMU_DREX1_1 530 /* mux clocks */ #define CLK_MOUT_HDMI 640 @@ -217,6 +228,8 @@ #define CLK_MOUT_EPLL 657 #define CLK_MOUT_MAU_EPLL 658 #define CLK_MOUT_USER_MAU_EPLL 659 +#define CLK_MOUT_SCLK_SPLL 660 +#define CLK_MOUT_MX_MSPLL_CCORE_PHY 661 /* divider clocks */ #define CLK_DOUT_PIXEL 768 @@ -248,8 +261,11 @@ #define CLK_DOUT_CCLK_DREX0 794 #define CLK_DOUT_CLK2X_PHY0 795 #define CLK_DOUT_PCLK_CORE_MEM 796 +#define CLK_FF_DOUT_SPLL2 797 +#define CLK_DOUT_PCLK_DREX0 798 +#define CLK_DOUT_PCLK_DREX1 799 /* must be greater than maximal clock id */ -#define CLK_NR_CLKS 797 +#define CLK_NR_CLKS 800 #endif /* _DT_BINDINGS_CLOCK_EXYNOS_5420_H */ diff --git a/dts/include/dt-bindings/clock/g12a-clkc.h b/dts/include/dt-bindings/clock/g12a-clkc.h index 82c9e0c020..b6b127e456 100644 --- a/dts/include/dt-bindings/clock/g12a-clkc.h +++ b/dts/include/dt-bindings/clock/g12a-clkc.h @@ -130,11 +130,12 @@ #define CLKID_MALI_1_SEL 172 #define CLKID_MALI_1 174 #define CLKID_MALI 175 -#define CLKID_MPLL_5OM 177 +#define CLKID_MPLL_50M 177 #define CLKID_CPU_CLK 187 #define CLKID_PCIE_PLL 201 #define CLKID_VDEC_1 204 #define CLKID_VDEC_HEVC 207 #define CLKID_VDEC_HEVCF 210 +#define CLKID_TS 212 #endif /* __G12A_CLKC_H */ diff --git a/dts/include/dt-bindings/clock/imx8mm-clock.h b/dts/include/dt-bindings/clock/imx8mm-clock.h index 1b4353e7b4..07e6c686f3 100644 --- a/dts/include/dt-bindings/clock/imx8mm-clock.h +++ b/dts/include/dt-bindings/clock/imx8mm-clock.h @@ -239,6 +239,15 @@ #define IMX8MM_CLK_NAND_USDHC_BUS_RAWNAND_CLK 222 -#define IMX8MM_CLK_END 223 +#define IMX8MM_CLK_GPIO1_ROOT 223 +#define IMX8MM_CLK_GPIO2_ROOT 224 +#define IMX8MM_CLK_GPIO3_ROOT 225 +#define IMX8MM_CLK_GPIO4_ROOT 226 +#define IMX8MM_CLK_GPIO5_ROOT 227 + +#define IMX8MM_CLK_SNVS_ROOT 228 +#define IMX8MM_CLK_GIC 229 + +#define IMX8MM_CLK_END 230 #endif diff --git a/dts/include/dt-bindings/clock/imx8mq-clock.h b/dts/include/dt-bindings/clock/imx8mq-clock.h index 6677e920dc..65463673d2 100644 --- a/dts/include/dt-bindings/clock/imx8mq-clock.h +++ b/dts/include/dt-bindings/clock/imx8mq-clock.h @@ -400,5 +400,8 @@ #define IMX8MQ_CLK_GPIO4_ROOT 262 #define IMX8MQ_CLK_GPIO5_ROOT 263 -#define IMX8MQ_CLK_END 264 +#define IMX8MQ_CLK_SNVS_ROOT 264 +#define IMX8MQ_CLK_GIC 265 + +#define IMX8MQ_CLK_END 266 #endif /* __DT_BINDINGS_CLOCK_IMX8MQ_H */ diff --git a/dts/include/dt-bindings/clock/meson8b-clkc.h b/dts/include/dt-bindings/clock/meson8b-clkc.h index 47556539f0..68862aaf97 100644 --- a/dts/include/dt-bindings/clock/meson8b-clkc.h +++ b/dts/include/dt-bindings/clock/meson8b-clkc.h @@ -112,5 +112,8 @@ #define CLKID_VDEC_HCODEC 199 #define CLKID_VDEC_2 202 #define CLKID_VDEC_HEVC 206 +#define CLKID_CTS_AMCLK 209 +#define CLKID_CTS_MCLK_I958 212 +#define CLKID_CTS_I958 213 #endif /* __MESON8B_CLKC_H */ diff --git a/dts/include/dt-bindings/clock/mt8516-clk.h b/dts/include/dt-bindings/clock/mt8516-clk.h index 9cfca53cd7..816447b98e 100644 --- a/dts/include/dt-bindings/clock/mt8516-clk.h +++ b/dts/include/dt-bindings/clock/mt8516-clk.h @@ -208,4 +208,21 @@ #define CLK_TOP_MSDC2_INFRA 176 #define CLK_TOP_NR_CLK 177 +/* AUDSYS */ + +#define CLK_AUD_AFE 0 +#define CLK_AUD_I2S 1 +#define CLK_AUD_22M 2 +#define CLK_AUD_24M 3 +#define CLK_AUD_INTDIR 4 +#define CLK_AUD_APLL2_TUNER 5 +#define CLK_AUD_APLL_TUNER 6 +#define CLK_AUD_HDMI 7 +#define CLK_AUD_SPDF 8 +#define CLK_AUD_ADC 9 +#define CLK_AUD_DAC 10 +#define CLK_AUD_DAC_PREDIS 11 +#define CLK_AUD_TML 12 +#define CLK_AUD_NR_CLK 13 + #endif /* _DT_BINDINGS_CLK_MT8516_H */ diff --git a/dts/include/dt-bindings/clock/qcom,gcc-qcs404.h b/dts/include/dt-bindings/clock/qcom,gcc-qcs404.h index 454b3f43f5..2cd62c9856 100644 --- a/dts/include/dt-bindings/clock/qcom,gcc-qcs404.h +++ b/dts/include/dt-bindings/clock/qcom,gcc-qcs404.h @@ -166,5 +166,12 @@ #define GCC_PCIEPHY_0_PHY_BCR 12 #define GCC_EMAC_BCR 13 #define GCC_CDSP_RESTART 14 +#define GCC_PCIE_0_AXI_MASTER_STICKY_ARES 15 +#define GCC_PCIE_0_AHB_ARES 16 +#define GCC_PCIE_0_AXI_SLAVE_ARES 17 +#define GCC_PCIE_0_AXI_MASTER_ARES 18 +#define GCC_PCIE_0_CORE_STICKY_ARES 19 +#define GCC_PCIE_0_SLEEP_ARES 20 +#define GCC_PCIE_0_PIPE_ARES 21 #endif diff --git a/dts/include/dt-bindings/clock/qcom,gpucc-msm8998.h b/dts/include/dt-bindings/clock/qcom,gpucc-msm8998.h new file mode 100644 index 0000000000..2623570ee9 --- /dev/null +++ b/dts/include/dt-bindings/clock/qcom,gpucc-msm8998.h @@ -0,0 +1,29 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2019, Jeffrey Hugo + */ + +#ifndef _DT_BINDINGS_CLK_MSM_GPUCC_8998_H +#define _DT_BINDINGS_CLK_MSM_GPUCC_8998_H + +#define GPUPLL0 0 +#define GPUPLL0_OUT_EVEN 1 +#define RBCPR_CLK_SRC 2 +#define GFX3D_CLK_SRC 3 +#define RBBMTIMER_CLK_SRC 4 +#define GFX3D_ISENSE_CLK_SRC 5 +#define RBCPR_CLK 6 +#define GFX3D_CLK 7 +#define RBBMTIMER_CLK 8 +#define GFX3D_ISENSE_CLK 9 +#define GPUCC_CXO_CLK 10 + +#define GPU_CX_BCR 0 +#define RBCPR_BCR 1 +#define GPU_GX_BCR 2 +#define GPU_ISENSE_BCR 3 + +#define GPU_CX_GDSC 1 +#define GPU_GX_GDSC 2 + +#endif diff --git a/dts/include/dt-bindings/clock/rk3228-cru.h b/dts/include/dt-bindings/clock/rk3228-cru.h index 3b245e3df8..de550ea56e 100644 --- a/dts/include/dt-bindings/clock/rk3228-cru.h +++ b/dts/include/dt-bindings/clock/rk3228-cru.h @@ -64,6 +64,7 @@ #define SCLK_WIFI 141 #define SCLK_OTGPHY0 142 #define SCLK_OTGPHY1 143 +#define SCLK_HDMI_PHY 144 /* dclk gates */ #define DCLK_VOP 190 diff --git a/dts/include/dt-bindings/clock/rk3328-cru.h b/dts/include/dt-bindings/clock/rk3328-cru.h index afb8113403..555b4ff660 100644 --- a/dts/include/dt-bindings/clock/rk3328-cru.h +++ b/dts/include/dt-bindings/clock/rk3328-cru.h @@ -164,6 +164,7 @@ #define PCLK_DCF 233 #define PCLK_SARADC 234 #define PCLK_ACODECPHY 235 +#define PCLK_WDT 236 /* hclk gates */ #define HCLK_PERI 308 diff --git a/dts/include/dt-bindings/clock/sifive-fu540-prci.h b/dts/include/dt-bindings/clock/sifive-fu540-prci.h index 6a0b70a37d..3b21d0522c 100644 --- a/dts/include/dt-bindings/clock/sifive-fu540-prci.h +++ b/dts/include/dt-bindings/clock/sifive-fu540-prci.h @@ -1,4 +1,4 @@ -/* SPDX-License-Identifier: GPL-2.0 */ +/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */ /* * Copyright (C) 2018-2019 SiFive, Inc. * Wesley Terpstra diff --git a/dts/include/dt-bindings/clock/stratix10-clock.h b/dts/include/dt-bindings/clock/stratix10-clock.h index 0ac1c90a18..08b98e20b7 100644 --- a/dts/include/dt-bindings/clock/stratix10-clock.h +++ b/dts/include/dt-bindings/clock/stratix10-clock.h @@ -79,6 +79,8 @@ #define STRATIX10_USB_CLK 59 #define STRATIX10_SPI_M_CLK 60 #define STRATIX10_NAND_CLK 61 -#define STRATIX10_NUM_CLKS 62 +#define STRATIX10_NAND_X_CLK 62 +#define STRATIX10_NAND_ECC_CLK 63 +#define STRATIX10_NUM_CLKS 64 #endif /* __STRATIX10_CLOCK_H */ diff --git a/dts/include/dt-bindings/gpio/tegra186-gpio.h b/dts/include/dt-bindings/gpio/tegra186-gpio.h index cabc5712e7..0782b05e27 100644 --- a/dts/include/dt-bindings/gpio/tegra186-gpio.h +++ b/dts/include/dt-bindings/gpio/tegra186-gpio.h @@ -41,34 +41,6 @@ #define TEGRA186_MAIN_GPIO(port, offset) \ ((TEGRA186_MAIN_GPIO_PORT_##port * 8) + offset) -/* need to keep these for backwards-compatibility */ -#define TEGRA_MAIN_GPIO_PORT_A 0 -#define TEGRA_MAIN_GPIO_PORT_B 1 -#define TEGRA_MAIN_GPIO_PORT_C 2 -#define TEGRA_MAIN_GPIO_PORT_D 3 -#define TEGRA_MAIN_GPIO_PORT_E 4 -#define TEGRA_MAIN_GPIO_PORT_F 5 -#define TEGRA_MAIN_GPIO_PORT_G 6 -#define TEGRA_MAIN_GPIO_PORT_H 7 -#define TEGRA_MAIN_GPIO_PORT_I 8 -#define TEGRA_MAIN_GPIO_PORT_J 9 -#define TEGRA_MAIN_GPIO_PORT_K 10 -#define TEGRA_MAIN_GPIO_PORT_L 11 -#define TEGRA_MAIN_GPIO_PORT_M 12 -#define TEGRA_MAIN_GPIO_PORT_N 13 -#define TEGRA_MAIN_GPIO_PORT_O 14 -#define TEGRA_MAIN_GPIO_PORT_P 15 -#define TEGRA_MAIN_GPIO_PORT_Q 16 -#define TEGRA_MAIN_GPIO_PORT_R 17 -#define TEGRA_MAIN_GPIO_PORT_T 18 -#define TEGRA_MAIN_GPIO_PORT_X 19 -#define TEGRA_MAIN_GPIO_PORT_Y 20 -#define TEGRA_MAIN_GPIO_PORT_BB 21 -#define TEGRA_MAIN_GPIO_PORT_CC 22 - -#define TEGRA_MAIN_GPIO(port, offset) \ - ((TEGRA_MAIN_GPIO_PORT_##port * 8) + offset) - /* GPIOs implemented by AON GPIO controller */ #define TEGRA186_AON_GPIO_PORT_S 0 #define TEGRA186_AON_GPIO_PORT_U 1 @@ -82,17 +54,4 @@ #define TEGRA186_AON_GPIO(port, offset) \ ((TEGRA186_AON_GPIO_PORT_##port * 8) + offset) -/* need to keep these for backwards-compatibility */ -#define TEGRA_AON_GPIO_PORT_S 0 -#define TEGRA_AON_GPIO_PORT_U 1 -#define TEGRA_AON_GPIO_PORT_V 2 -#define TEGRA_AON_GPIO_PORT_W 3 -#define TEGRA_AON_GPIO_PORT_Z 4 -#define TEGRA_AON_GPIO_PORT_AA 5 -#define TEGRA_AON_GPIO_PORT_EE 6 -#define TEGRA_AON_GPIO_PORT_FF 7 - -#define TEGRA_AON_GPIO(port, offset) \ - ((TEGRA_AON_GPIO_PORT_##port * 8) + offset) - #endif diff --git a/dts/include/dt-bindings/net/ti-dp83867.h b/dts/include/dt-bindings/net/ti-dp83867.h index 3b48847cd8..6fc4b445d3 100644 --- a/dts/include/dt-bindings/net/ti-dp83867.h +++ b/dts/include/dt-bindings/net/ti-dp83867.h @@ -48,4 +48,6 @@ #define DP83867_CLK_O_SEL_CHN_C_TCLK 0xA #define DP83867_CLK_O_SEL_CHN_D_TCLK 0xB #define DP83867_CLK_O_SEL_REF_CLK 0xC +/* Special flag to indicate clock should be off */ +#define DP83867_CLK_O_SEL_OFF 0xFFFFFFFF #endif diff --git a/dts/include/dt-bindings/power/qcom-aoss-qmp.h b/dts/include/dt-bindings/power/qcom-aoss-qmp.h new file mode 100644 index 0000000000..ec336d31de --- /dev/null +++ b/dts/include/dt-bindings/power/qcom-aoss-qmp.h @@ -0,0 +1,14 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* Copyright (c) 2018, Linaro Ltd. */ + +#ifndef __DT_BINDINGS_POWER_QCOM_AOSS_QMP_H +#define __DT_BINDINGS_POWER_QCOM_AOSS_QMP_H + +#define AOSS_QMP_LS_CDSP 0 +#define AOSS_QMP_LS_LPASS 1 +#define AOSS_QMP_LS_MODEM 2 +#define AOSS_QMP_LS_SLPI 3 +#define AOSS_QMP_LS_SPSS 4 +#define AOSS_QMP_LS_VENUS 5 + +#endif diff --git a/dts/include/dt-bindings/power/qcom-rpmpd.h b/dts/include/dt-bindings/power/qcom-rpmpd.h index 87d9c66116..93e36d0115 100644 --- a/dts/include/dt-bindings/power/qcom-rpmpd.h +++ b/dts/include/dt-bindings/power/qcom-rpmpd.h @@ -36,4 +36,38 @@ #define MSM8996_VDDSSCX 5 #define MSM8996_VDDSSCX_VFC 6 +/* MSM8998 Power Domain Indexes */ +#define MSM8998_VDDCX 0 +#define MSM8998_VDDCX_AO 1 +#define MSM8998_VDDCX_VFL 2 +#define MSM8998_VDDMX 3 +#define MSM8998_VDDMX_AO 4 +#define MSM8998_VDDMX_VFL 5 +#define MSM8998_SSCCX 6 +#define MSM8998_SSCCX_VFL 7 +#define MSM8998_SSCMX 8 +#define MSM8998_SSCMX_VFL 9 + +/* QCS404 Power Domains */ +#define QCS404_VDDMX 0 +#define QCS404_VDDMX_AO 1 +#define QCS404_VDDMX_VFL 2 +#define QCS404_LPICX 3 +#define QCS404_LPICX_VFL 4 +#define QCS404_LPIMX 5 +#define QCS404_LPIMX_VFL 6 + +/* RPM SMD Power Domain performance levels */ +#define RPM_SMD_LEVEL_RETENTION 16 +#define RPM_SMD_LEVEL_RETENTION_PLUS 32 +#define RPM_SMD_LEVEL_MIN_SVS 48 +#define RPM_SMD_LEVEL_LOW_SVS 64 +#define RPM_SMD_LEVEL_SVS 128 +#define RPM_SMD_LEVEL_SVS_PLUS 192 +#define RPM_SMD_LEVEL_NOM 256 +#define RPM_SMD_LEVEL_NOM_PLUS 320 +#define RPM_SMD_LEVEL_TURBO 384 +#define RPM_SMD_LEVEL_TURBO_NO_CPR 416 +#define RPM_SMD_LEVEL_BINNING 512 + #endif diff --git a/dts/include/dt-bindings/reset/bitmain,bm1880-reset.h b/dts/include/dt-bindings/reset/bitmain,bm1880-reset.h new file mode 100644 index 0000000000..4c0de52237 --- /dev/null +++ b/dts/include/dt-bindings/reset/bitmain,bm1880-reset.h @@ -0,0 +1,51 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (c) 2018 Bitmain Ltd. + * Copyright (c) 2019 Linaro Ltd. + */ + +#ifndef _DT_BINDINGS_BM1880_RESET_H +#define _DT_BINDINGS_BM1880_RESET_H + +#define BM1880_RST_MAIN_AP 0 +#define BM1880_RST_SECOND_AP 1 +#define BM1880_RST_DDR 2 +#define BM1880_RST_VIDEO 3 +#define BM1880_RST_JPEG 4 +#define BM1880_RST_VPP 5 +#define BM1880_RST_GDMA 6 +#define BM1880_RST_AXI_SRAM 7 +#define BM1880_RST_TPU 8 +#define BM1880_RST_USB 9 +#define BM1880_RST_ETH0 10 +#define BM1880_RST_ETH1 11 +#define BM1880_RST_NAND 12 +#define BM1880_RST_EMMC 13 +#define BM1880_RST_SD 14 +#define BM1880_RST_SDMA 15 +#define BM1880_RST_I2S0 16 +#define BM1880_RST_I2S1 17 +#define BM1880_RST_UART0_1_CLK 18 +#define BM1880_RST_UART0_1_ACLK 19 +#define BM1880_RST_UART2_3_CLK 20 +#define BM1880_RST_UART2_3_ACLK 21 +#define BM1880_RST_MINER 22 +#define BM1880_RST_I2C0 23 +#define BM1880_RST_I2C1 24 +#define BM1880_RST_I2C2 25 +#define BM1880_RST_I2C3 26 +#define BM1880_RST_I2C4 27 +#define BM1880_RST_PWM0 28 +#define BM1880_RST_PWM1 29 +#define BM1880_RST_PWM2 30 +#define BM1880_RST_PWM3 31 +#define BM1880_RST_SPI 32 +#define BM1880_RST_GPIO0 33 +#define BM1880_RST_GPIO1 34 +#define BM1880_RST_GPIO2 35 +#define BM1880_RST_EFUSE 36 +#define BM1880_RST_WDT 37 +#define BM1880_RST_AHB_ROM 38 +#define BM1880_RST_SPIC 39 + +#endif /* _DT_BINDINGS_BM1880_RESET_H */ diff --git a/dts/include/dt-bindings/sound/madera.h b/dts/include/dt-bindings/sound/madera.h new file mode 100644 index 0000000000..d0096d5eb0 --- /dev/null +++ b/dts/include/dt-bindings/sound/madera.h @@ -0,0 +1,25 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Device Tree defines for Madera codecs + * + * Copyright (C) 2016-2017 Cirrus Logic, Inc. and + * Cirrus Logic International Semiconductor Ltd. + */ + +#ifndef DT_BINDINGS_SOUND_MADERA_H +#define DT_BINDINGS_SOUND_MADERA_H + +#define MADERA_INMODE_DIFF 0 +#define MADERA_INMODE_SE 1 +#define MADERA_INMODE_DMIC 2 + +#define MADERA_DMIC_REF_MICVDD 0 +#define MADERA_DMIC_REF_MICBIAS1 1 +#define MADERA_DMIC_REF_MICBIAS2 2 +#define MADERA_DMIC_REF_MICBIAS3 3 + +#define CS47L35_DMIC_REF_MICBIAS1B 1 +#define CS47L35_DMIC_REF_MICBIAS2A 2 +#define CS47L35_DMIC_REF_MICBIAS2B 3 + +#endif diff --git a/dts/include/dt-bindings/sound/meson-g12a-tohdmitx.h b/dts/include/dt-bindings/sound/meson-g12a-tohdmitx.h new file mode 100644 index 0000000000..c5e1f48d30 --- /dev/null +++ b/dts/include/dt-bindings/sound/meson-g12a-tohdmitx.h @@ -0,0 +1,13 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __DT_MESON_G12A_TOHDMITX_H +#define __DT_MESON_G12A_TOHDMITX_H + +#define TOHDMITX_I2S_IN_A 0 +#define TOHDMITX_I2S_IN_B 1 +#define TOHDMITX_I2S_IN_C 2 +#define TOHDMITX_I2S_OUT 3 +#define TOHDMITX_SPDIF_IN_A 4 +#define TOHDMITX_SPDIF_IN_B 5 +#define TOHDMITX_SPDIF_OUT 6 + +#endif /* __DT_MESON_G12A_TOHDMITX_H */ diff --git a/dts/src/arc/haps_hs.dts b/dts/src/arc/haps_hs.dts index 1ebfa04649..44bc522fde 100644 --- a/dts/src/arc/haps_hs.dts +++ b/dts/src/arc/haps_hs.dts @@ -62,5 +62,35 @@ #interrupt-cells = <1>; interrupts = <20>; }; + + virtio0: virtio@f0100000 { + compatible = "virtio,mmio"; + reg = <0xf0100000 0x2000>; + interrupts = <31>; + }; + + virtio1: virtio@f0102000 { + compatible = "virtio,mmio"; + reg = <0xf0102000 0x2000>; + interrupts = <32>; + }; + + virtio2: virtio@f0104000 { + compatible = "virtio,mmio"; + reg = <0xf0104000 0x2000>; + interrupts = <33>; + }; + + virtio3: virtio@f0106000 { + compatible = "virtio,mmio"; + reg = <0xf0106000 0x2000>; + interrupts = <34>; + }; + + virtio4: virtio@f0108000 { + compatible = "virtio,mmio"; + reg = <0xf0108000 0x2000>; + interrupts = <35>; + }; }; }; diff --git a/dts/src/arc/hsdk.dts b/dts/src/arc/hsdk.dts index 9a45cb0930..bfc7f5f5d6 100644 --- a/dts/src/arc/hsdk.dts +++ b/dts/src/arc/hsdk.dts @@ -8,6 +8,7 @@ */ /dts-v1/; +#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/reset/snps,hsdk-reset.h> / { @@ -252,6 +253,19 @@ dma-coherent; }; + spi0: spi@20000 { + compatible = "snps,dw-apb-ssi"; + reg = <0x20000 0x100>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <16>; + num-cs = <2>; + reg-io-width = <4>; + clocks = <&input_clk>; + cs-gpios = <&creg_gpio 0 GPIO_ACTIVE_LOW>, + <&creg_gpio 1 GPIO_ACTIVE_LOW>; + }; + creg_gpio: gpio@14b0 { compatible = "snps,creg-gpio-hsdk"; reg = <0x14b0 0x4>; diff --git a/dts/src/arm/am335x-baltos-ir2110.dts b/dts/src/arm/am335x-baltos-ir2110.dts index 49e46baf95..386d5f8997 100644 --- a/dts/src/arm/am335x-baltos-ir2110.dts +++ b/dts/src/arm/am335x-baltos-ir2110.dts @@ -30,6 +30,12 @@ AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7) /* lcd_ac_bias_en.gpio2[25] RI */ >; }; + + mmc1_pins: pinmux_mmc1_pins { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT, MUX_MODE7) /* MMC1 CD */ + >; + }; }; &uart1 { @@ -65,7 +71,13 @@ }; &cpsw_emac1 { - phy-mode = "rgmii-txid"; + phy-mode = "rgmii-id"; dual_emac_res_vlan = <2>; phy-handle = <&phy1>; }; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + cd-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; +}; diff --git a/dts/src/arm/am335x-baltos-ir3220.dts b/dts/src/arm/am335x-baltos-ir3220.dts index 9e88bc2f64..b0df7256db 100644 --- a/dts/src/arm/am335x-baltos-ir3220.dts +++ b/dts/src/arm/am335x-baltos-ir3220.dts @@ -51,6 +51,12 @@ AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_INPUT_PULLUP, MUX_MODE7) /* mcasp0_aclkr.gpio3[18], INPUT_PULLDOWN | MODE7 */ >; }; + + mmc1_pins: pinmux_mmc1_pins { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT, MUX_MODE7) /* MMC1 CD */ + >; + }; }; &uart1 { @@ -107,7 +113,13 @@ }; &cpsw_emac1 { - phy-mode = "rgmii-txid"; + phy-mode = "rgmii-id"; dual_emac_res_vlan = <2>; phy-handle = <&phy1>; }; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + cd-gpios = <&gpio2 18 GPIO_ACTIVE_LOW>; +}; diff --git a/dts/src/arm/am335x-baltos-ir5221.dts b/dts/src/arm/am335x-baltos-ir5221.dts index 28aa004229..d6aa46e870 100644 --- a/dts/src/arm/am335x-baltos-ir5221.dts +++ b/dts/src/arm/am335x-baltos-ir5221.dts @@ -60,6 +60,11 @@ >; }; + mmc1_pins: pinmux_mmc1_pins { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT, MUX_MODE7) /* MMC1 CD */ + >; + }; }; &uart1 { @@ -125,7 +130,7 @@ }; &cpsw_emac1 { - phy-mode = "rgmii-txid"; + phy-mode = "rgmii-id"; dual_emac_res_vlan = <2>; phy-handle = <&phy1>; }; @@ -136,3 +141,9 @@ status = "okay"; }; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + cd-gpios = <&gpio2 18 GPIO_ACTIVE_LOW>; +}; diff --git a/dts/src/arm/am335x-pcm-953.dtsi b/dts/src/arm/am335x-pcm-953.dtsi index d774bf7672..9bfa032bca 100644 --- a/dts/src/arm/am335x-pcm-953.dtsi +++ b/dts/src/arm/am335x-pcm-953.dtsi @@ -36,15 +36,13 @@ pinctrl-names = "default"; pinctrl-0 = <&user_leds_pins>; - green { - label = "green:user"; + user-led0 { gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>; linux,default-trigger = "gpio"; default-state = "on"; }; - yellow { - label = "yellow:user"; + user-led1 { gpios = <&gpio1 31 GPIO_ACTIVE_LOW>; linux,default-trigger = "gpio"; default-state = "on"; @@ -135,22 +133,6 @@ &davinci_mdio { phy1: ethernet-phy@2 { reg = <2>; - - /* Register 260 (104h) – RGMII Clock and Control Pad Skew */ - rxc-skew-ps = <1400>; - rxdv-skew-ps = <0>; - txc-skew-ps = <1400>; - txen-skew-ps = <0>; - /* Register 261 (105h) – RGMII RX Data Pad Skew */ - rxd3-skew-ps = <0>; - rxd2-skew-ps = <0>; - rxd1-skew-ps = <0>; - rxd0-skew-ps = <0>; - /* Register 262 (106h) – RGMII TX Data Pad Skew */ - txd3-skew-ps = <0>; - txd2-skew-ps = <0>; - txd1-skew-ps = <0>; - txd0-skew-ps = <0>; }; }; diff --git a/dts/src/arm/am335x-phycore-rdk.dts b/dts/src/arm/am335x-phycore-rdk.dts index 672daf9d36..43907d03e6 100644 --- a/dts/src/arm/am335x-phycore-rdk.dts +++ b/dts/src/arm/am335x-phycore-rdk.dts @@ -10,6 +10,10 @@ #include "am335x-pcm-953.dtsi" /* SoM */ +&gpmc { + status = "okay"; +}; + &i2c_eeprom { status = "okay"; }; diff --git a/dts/src/arm/am335x-phycore-som.dtsi b/dts/src/arm/am335x-phycore-som.dtsi index ee6b1cb27c..3d0672b53d 100644 --- a/dts/src/arm/am335x-phycore-som.dtsi +++ b/dts/src/arm/am335x-phycore-som.dtsi @@ -27,17 +27,13 @@ reg = <0x80000000 0x10000000>; /* 256 MB */ }; - regulators { - compatible = "simple-bus"; - - vcc5v: fixedregulator0 { - compatible = "regulator-fixed"; - regulator-name = "vcc5v"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-boot-on; - regulator-always-on; - }; + vcc5v: fixedregulator0 { + compatible = "regulator-fixed"; + regulator-name = "vcc5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + regulator-always-on; }; }; @@ -50,6 +46,33 @@ status = "okay"; }; +/* EMMC */ +&am33xx_pinmux { + emmc_pins: pinmux_emmc_pins { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn1.mmc1_clk */ + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn2.mmc1_cmd */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */ + >; + }; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&emmc_pins>; + vmmc-supply = <&vmmc_reg>; + bus-width = <8>; + ti,non-removable; + status = "disabled"; +}; + /* Ethernet */ &am33xx_pinmux { ethernet0_pins: pinmux_ethernet0 { @@ -164,7 +187,7 @@ }; &gpmc { - status = "okay"; + status = "disabled"; pinctrl-names = "default"; pinctrl-0 = <&nandflash_pins>; ranges = <0 0 0x08000000 0x1000000>; /* CS0: NAND */ diff --git a/dts/src/arm/am335x-regor-rdk.dts b/dts/src/arm/am335x-regor-rdk.dts new file mode 100644 index 0000000000..66a1360b83 --- /dev/null +++ b/dts/src/arm/am335x-regor-rdk.dts @@ -0,0 +1,24 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2019 Phytec Messtechnik GmbH + * Author: Teresa Remmet <t.remmet@phytec.de> + * + */ + +/dts-v1/; + +#include "am335x-phycore-som.dtsi" +#include "am335x-regor.dtsi" + +/* SoM */ +&gpmc { + status = "okay"; +}; + +&i2c_eeprom { + status = "okay"; +}; + +&serial_flash { + status = "okay"; +}; diff --git a/dts/src/arm/am335x-regor.dtsi b/dts/src/arm/am335x-regor.dtsi new file mode 100644 index 0000000000..5aff02a957 --- /dev/null +++ b/dts/src/arm/am335x-regor.dtsi @@ -0,0 +1,223 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2019 Phytec Messtechnik GmbH + * Author: Teresa Remmet <t.remmet@phytec.de> + * + */ + +/ { + model = "Phytec AM335x phyBOARD-REGOR"; + compatible = "phytec,am335x-regor", "phytec,am335x-phycore-som", "ti,am33xx"; + + vcc3v3: fixedregulator@1 { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + + /* User IO */ + user_leds: user_leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&user_leds_pins>; + + run_stop-led { + gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "gpio"; + default-state = "off"; + }; + + error-led { + gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "gpio"; + default-state = "off"; + }; + }; +}; + +/* User Leds */ +&am33xx_pinmux { + user_leds_pins: pinmux_user_leds { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* lcd_hsync.gpio2_22 */ + AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* mcasp0_fsx.gpio3_15 */ + >; + }; +}; + +/* CAN Busses */ +&am33xx_pinmux { + dcan1_pins: pinmux_dcan1 { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT_PULLUP, MUX_MODE2) /* uart0_ctsn.d_can1_tx */ + AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT_PULLUP, MUX_MODE2) /* uart0_rtsn.d_can1_rx */ + >; + }; +}; + +&dcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&dcan1_pins>; + status = "okay"; +}; + +/* Ethernet */ +&am33xx_pinmux { + ethernet1_pins: pinmux_ethernet1 { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT, MUX_MODE1) /* gpmc_a0.mii2_txen */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_a1.mii2_rxdv */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_OUTPUT, MUX_MODE1) /* gpmc_a2.mii2_txd3 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_OUTPUT, MUX_MODE1) /* gpmc_a3.mii2_txd2 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT, MUX_MODE1) /* gpmc_a4.mii2_txd1 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT, MUX_MODE1) /* gpmc_a5.mii2_txd0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_a6.mii2_txclk */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_a7.mii2_rxclk */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_a8.mii2_rxd3 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_a9.mii2_rxd2 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_a10.mii2_rxd1 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_a11.mii2_rxd0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_wpn.mii2_rxerr */ + AM33XX_PADCONF(AM335X_PIN_GPMC_BEN1, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_ben1.mii2_col */ + >; + }; +}; + +&cpsw_emac1 { + phy-handle = <&phy1>; + phy-mode = "mii"; + dual_emac_res_vlan = <2>; +}; + +&davinci_mdio { + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +&mac { + slaves = <2>; + pinctrl-names = "default"; + pinctrl-0 = <ðernet0_pins ðernet1_pins>; + dual_emac = <1>; +}; + +/* GPIOs */ +&am33xx_pinmux { + pinctrl-names = "default"; + pinctrl-0 = <&user_gpios_pins>; + + user_gpios_pins: pinmux_user_gpios { + pinctrl-single,pins = < + /* DIGIN 1-4 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_INPUT, MUX_MODE7) /* gpmc_ad11.gpio0_27 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_INPUT, MUX_MODE7) /* gpmc_ad10.gpio0_26 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_INPUT, MUX_MODE7) /* gpmc_ad9.gpio0_23 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_INPUT, MUX_MODE7) /* gpmc_ad8.gpio0_22 */ + /* DIGOUT 1-4 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_OUTPUT, MUX_MODE7) /* gpmc_ad15.gpio1_15 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_OUTPUT, MUX_MODE7) /* gpmc_ad14.gpio1_14 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_OUTPUT, MUX_MODE7) /* gpmc_ad13.gpio1_13 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_OUTPUT, MUX_MODE7) /* gpmc_ad12.gpio1_12 */ + >; + }; +}; + +/* MMC */ +&am33xx_pinmux { + mmc1_pins: pinmux_mmc1 { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT_PULLUP, MUX_MODE7) /* spi0_cs1.mmc0_sdcd */ + >; + }; +}; + +&mmc1 { + vmmc-supply = <&vcc3v3>; + bus-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +/* RTC */ +&i2c_rtc { + status = "okay"; +}; + +/* UARTs */ +&am33xx_pinmux { + uart0_pins: pinmux_uart0 { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) + >; + }; + + uart2_pins: pinmux_uart2 { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLUP, MUX_MODE1) /* mii1_tx_clk.uart2_rxd */ + AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* mii1_rx_clk.uart2_txd */ + >; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; + status = "okay"; +}; + +/* RS485 - UART1 */ +&am33xx_pinmux { + uart1_rs485_pins: pinmux_uart1_rs485_pins { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLUP, MUX_MODE0) + >; + }; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_rs485_pins>; + status = "okay"; + linux,rs485-enabled-at-boot-time; +}; + +/* USB */ +&cppi41dma { + status = "okay"; +}; + +&usb_ctrl_mod { + status = "okay"; +}; + +&usb { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +&usb0_phy { + status = "okay"; +}; diff --git a/dts/src/arm/am335x-wega-rdk.dts b/dts/src/arm/am335x-wega-rdk.dts index 2e04f6df82..866b5f0cbf 100644 --- a/dts/src/arm/am335x-wega-rdk.dts +++ b/dts/src/arm/am335x-wega-rdk.dts @@ -10,6 +10,10 @@ #include "am335x-wega.dtsi" /* SoM */ +&gpmc { + status = "okay"; +}; + &i2c_eeprom { status = "okay"; }; diff --git a/dts/src/arm/am335x-wega.dtsi b/dts/src/arm/am335x-wega.dtsi index 67bde56f89..61fc4cd2d1 100644 --- a/dts/src/arm/am335x-wega.dtsi +++ b/dts/src/arm/am335x-wega.dtsi @@ -12,16 +12,12 @@ compatible = "ti,da830-evm-audio"; }; - regulators { - compatible = "simple-bus"; - - vcc3v3: fixedregulator1 { - compatible = "regulator-fixed"; - regulator-name = "vcc3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - }; + vcc3v3: fixedregulator1 { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; }; }; diff --git a/dts/src/arm/arm-realview-eb.dtsi b/dts/src/arm/arm-realview-eb.dtsi index 610506723e..fe0207b880 100644 --- a/dts/src/arm/arm-realview-eb.dtsi +++ b/dts/src/arm/arm-realview-eb.dtsi @@ -119,6 +119,9 @@ compatible = "arm,versatile-flash", "cfi-flash"; reg = <0x40000000 0x04000000>; bank-width = <4>; + partitions { + compatible = "arm,arm-firmware-suite"; + }; }; flash1@44000000 { @@ -126,6 +129,9 @@ compatible = "arm,versatile-flash", "cfi-flash"; reg = <0x44000000 0x04000000>; bank-width = <4>; + partitions { + compatible = "arm,arm-firmware-suite"; + }; }; /* SMSC LAN91C111 ethernet with PHY and EEPROM */ diff --git a/dts/src/arm/arm-realview-pb1176.dts b/dts/src/arm/arm-realview-pb1176.dts index cbbb8878da..2625ce66f8 100644 --- a/dts/src/arm/arm-realview-pb1176.dts +++ b/dts/src/arm/arm-realview-pb1176.dts @@ -120,12 +120,18 @@ compatible = "arm,versatile-flash", "cfi-flash"; reg = <0x30000000 0x4000000>; bank-width = <4>; + partitions { + compatible = "arm,arm-firmware-suite"; + }; }; fpga_flash@38000000 { compatible = "arm,versatile-flash", "cfi-flash"; reg = <0x38000000 0x800000>; bank-width = <4>; + partitions { + compatible = "arm,arm-firmware-suite"; + }; }; /* diff --git a/dts/src/arm/arm-realview-pb11mp.dts b/dts/src/arm/arm-realview-pb11mp.dts index 2015619ca2..c69cf7ddbe 100644 --- a/dts/src/arm/arm-realview-pb11mp.dts +++ b/dts/src/arm/arm-realview-pb11mp.dts @@ -235,6 +235,9 @@ compatible = "arm,versatile-flash", "cfi-flash"; reg = <0x40000000 0x04000000>; bank-width = <4>; + partitions { + compatible = "arm,arm-firmware-suite"; + }; }; flash1@44000000 { @@ -242,6 +245,9 @@ compatible = "arm,versatile-flash", "cfi-flash"; reg = <0x44000000 0x04000000>; bank-width = <4>; + partitions { + compatible = "arm,arm-firmware-suite"; + }; }; bridge { diff --git a/dts/src/arm/arm-realview-pbx.dtsi b/dts/src/arm/arm-realview-pbx.dtsi index a81e9c2824..09f3f544f3 100644 --- a/dts/src/arm/arm-realview-pbx.dtsi +++ b/dts/src/arm/arm-realview-pbx.dtsi @@ -134,6 +134,9 @@ compatible = "arm,versatile-flash", "cfi-flash"; reg = <0x40000000 0x04000000>; bank-width = <4>; + partitions { + compatible = "arm,arm-firmware-suite"; + }; }; flash1@44000000 { @@ -141,6 +144,9 @@ compatible = "arm,versatile-flash", "cfi-flash"; reg = <0x44000000 0x04000000>; bank-width = <4>; + partitions { + compatible = "arm,arm-firmware-suite"; + }; }; /* SMSC 9118 ethernet with PHY and EEPROM */ diff --git a/dts/src/arm/armada-370-netgear-rn104.dts b/dts/src/arm/armada-370-netgear-rn104.dts index 9fd1cb9f49..85e2e9e27a 100644 --- a/dts/src/arm/armada-370-netgear-rn104.dts +++ b/dts/src/arm/armada-370-netgear-rn104.dts @@ -143,6 +143,20 @@ }; }; + auxdisplay { + compatible = "hit,hd44780"; + data-gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>, + <&gpio1 26 GPIO_ACTIVE_HIGH>, + <&gpio1 27 GPIO_ACTIVE_HIGH>, + <&gpio1 29 GPIO_ACTIVE_HIGH>; + enable-gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>; + rs-gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>; + rw-gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>; + backlight-gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; + display-height-chars = <2>; + display-width-chars = <16>; + }; + gpio-keys { compatible = "gpio-keys"; pinctrl-0 = <&backup_button_pin diff --git a/dts/src/arm/armada-xp-98dx3236.dtsi b/dts/src/arm/armada-xp-98dx3236.dtsi index 59753470cd..267d0c178e 100644 --- a/dts/src/arm/armada-xp-98dx3236.dtsi +++ b/dts/src/arm/armada-xp-98dx3236.dtsi @@ -336,3 +336,11 @@ status = "disabled"; }; +&uart0 { + compatible = "marvell,armada-38x-uart"; +}; + +&uart1 { + compatible = "marvell,armada-38x-uart"; +}; + diff --git a/dts/src/arm/aspeed-bmc-facebook-cmm.dts b/dts/src/arm/aspeed-bmc-facebook-cmm.dts index 43aba4071a..d519d307aa 100644 --- a/dts/src/arm/aspeed-bmc-facebook-cmm.dts +++ b/dts/src/arm/aspeed-bmc-facebook-cmm.dts @@ -372,3 +372,11 @@ &adc { status = "okay"; }; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; diff --git a/dts/src/arm/aspeed-bmc-facebook-yamp.dts b/dts/src/arm/aspeed-bmc-facebook-yamp.dts new file mode 100644 index 0000000000..4e09a9cf32 --- /dev/null +++ b/dts/src/arm/aspeed-bmc-facebook-yamp.dts @@ -0,0 +1,160 @@ +// SPDX-License-Identifier: GPL-2.0+ +// Copyright (c) 2018 Facebook Inc. +/dts-v1/; + +#include "aspeed-g5.dtsi" + +/ { + model = "Facebook YAMP 100 BMC"; + compatible = "facebook,yamp-bmc", "aspeed,ast2500"; + + aliases { + /* + * Override the default uart aliases to avoid breaking + * the legacy applications. + */ + serial0 = &uart5; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; + }; + + chosen { + stdout-path = &uart5; + bootargs = "console=ttyS0,9600n8 root=/dev/ram rw"; + }; + + memory@80000000 { + reg = <0x80000000 0x20000000>; + }; +}; + +&pinctrl { + aspeed,external-nodes = <&gfx &lhc>; +}; + +/* + * Update reset type to "system" (full chip) to fix warm reboot hang issue + * when reset type is set to default ("soc", gated by reset mask registers). + */ +&wdt1 { + status = "okay"; + aspeed,reset-type = "system"; +}; + +/* + * wdt2 is not used by Yamp. + */ +&wdt2 { + status = "disabled"; +}; + +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bmc"; +#include "facebook-bmc-flash-layout.dtsi" + }; +}; + +&uart1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd1_default + &pinctrl_rxd1_default>; +}; + +&uart2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd2_default + &pinctrl_rxd2_default>; +}; + +&uart3 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd3_default + &pinctrl_rxd3_default>; +}; + +&uart5 { + status = "okay"; +}; + +&mac0 { + status = "okay"; + use-ncsi; + no-hw-checksum; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii1_default>; +}; + +&i2c0 { + status = "okay"; +}; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; + + i2c-switch@75 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x75>; + }; +}; + +&i2c3 { + status = "okay"; +}; + +&i2c4 { + status = "okay"; +}; + +&i2c5 { + status = "okay"; +}; + +&i2c6 { + status = "okay"; +}; + +&i2c7 { + status = "okay"; +}; + +&i2c8 { + status = "okay"; +}; + +&i2c9 { + status = "okay"; +}; + +&i2c10 { + status = "okay"; +}; + +&i2c11 { + status = "okay"; +}; + +&i2c12 { + status = "okay"; +}; + +&i2c13 { + status = "okay"; +}; + +&vhub { + status = "okay"; +}; diff --git a/dts/src/arm/aspeed-bmc-inspur-fp5280g2.dts b/dts/src/arm/aspeed-bmc-inspur-fp5280g2.dts new file mode 100644 index 0000000000..628195b66d --- /dev/null +++ b/dts/src/arm/aspeed-bmc-inspur-fp5280g2.dts @@ -0,0 +1,846 @@ +// SPDX-License-Identifier: GPL-2.0+ +/dts-v1/; +#include "aspeed-g5.dtsi" +#include <dt-bindings/gpio/aspeed-gpio.h> +#include <dt-bindings/leds/leds-pca955x.h> + +/ { + model = "FP5280G2 BMC"; + compatible = "inspur,fp5280g2-bmc", "aspeed,ast2500"; + + chosen { + stdout-path = &uart5; + bootargs = "console=ttyS4,115200 earlyprintk"; + }; + + memory@80000000 { + reg = <0x80000000 0x20000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + vga_memory: framebuffer@9f000000 { + no-map; + reg = <0x9f000000 0x01000000>; /* 16M */ + }; + + flash_memory: region@98000000 { + no-map; + reg = <0x98000000 0x04000000>; /* 64M */ + }; + + coldfire_memory: codefire_memory@9ef00000 { + reg = <0x9ef00000 0x00100000>; + no-map; + }; + + gfx_memory: framebuffer { + size = <0x01000000>; + alignment = <0x01000000>; + compatible = "shared-dma-pool"; + reusable; + }; + + video_engine_memory: jpegbuffer { + size = <0x02000000>; /* 32M */ + alignment = <0x01000000>; + compatible = "shared-dma-pool"; + reusable; + }; + }; + + fsi: gpio-fsi { + compatible = "aspeed,ast2500-cf-fsi-master", "fsi-master"; + #address-cells = <2>; + #size-cells = <0>; + no-gpio-delays; + + memory-region = <&coldfire_memory>; + aspeed,sram = <&sram>; + aspeed,cvic = <&cvic>; + + clock-gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>; + data-gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_HIGH>; + mux-gpios = <&gpio ASPEED_GPIO(I, 2) GPIO_ACTIVE_HIGH>; + enable-gpios = <&gpio ASPEED_GPIO(I, 3) GPIO_ACTIVE_HIGH>; + trans-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_HIGH>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + checkstop { + label = "checkstop"; + gpios = <&gpio ASPEED_GPIO(B, 3) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(B, 3)>; + }; + + ps0-presence { + label = "ps0-presence"; + gpios = <&gpio ASPEED_GPIO(F, 0) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(F, 0)>; + }; + + ps1-presence { + label = "ps1-presence"; + gpios = <&gpio ASPEED_GPIO(F, 1) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(F, 1)>; + }; + + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <1000>; + + fan0-presence { + label = "fan0-presence"; + gpios = <&pca1 0 GPIO_ACTIVE_LOW>; + linux,code = <1>; + }; + + fan1-presence { + label = "fan1-presence"; + gpios = <&pca1 1 GPIO_ACTIVE_LOW>; + linux,code = <2>; + }; + + fan2-presence { + label = "fan2-presence"; + gpios = <&pca1 2 GPIO_ACTIVE_LOW>; + linux,code = <3>; + }; + + fan3-presence { + label = "fan3-presence"; + gpios = <&pca1 3 GPIO_ACTIVE_LOW>; + linux,code = <4>; + }; + + fan4-presence { + label = "fan4-presence"; + gpios = <&pca1 4 GPIO_ACTIVE_LOW>; + linux,code = <5>; + }; + + fan5-presence { + label = "fan5-presence"; + gpios = <&pca1 5 GPIO_ACTIVE_LOW>; + linux,code = <6>; + }; + + fan6-presence { + label = "fan6-presence"; + gpios = <&pca1 6 GPIO_ACTIVE_LOW>; + linux,code = <7>; + }; + + fan7-presence { + label = "fan7-presence"; + gpios = <&pca1 7 GPIO_ACTIVE_LOW>; + linux,code = <8>; + }; + }; + + leds { + compatible = "gpio-leds"; + + power { + label = "power"; + /* TODO: dummy gpio */ + gpios = <&gpio ASPEED_GPIO(R, 1) GPIO_ACTIVE_LOW>; + }; + + }; + + iio-hwmon-battery { + compatible = "iio-hwmon"; + io-channels = <&adc 15>; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>, + <&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>, <&adc 9>, + <&adc 10>, <&adc 11>, <&adc 12>, <&adc 13>, <&adc 14>; + }; + +}; + +&fmc { + status = "okay"; + + flash@0 { + status = "okay"; + label = "bmc"; + m25p,fast-read; + spi-max-frequency = <50000000>; +#include "openbmc-flash-layout.dtsi" + }; +}; + +&spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1_default>; + + flash@0 { + status = "okay"; + label = "pnor"; + m25p,fast-read; + spi-max-frequency = <100000000>; + }; +}; + +&uart1 { + /* Rear RS-232 connector */ + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd1_default + &pinctrl_rxd1_default + &pinctrl_nrts1_default + &pinctrl_ndtr1_default + &pinctrl_ndsr1_default + &pinctrl_ncts1_default + &pinctrl_ndcd1_default + &pinctrl_nri1_default>; +}; + +&uart2 { + /* Test Point */ + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>; +}; + +&uart3 { + /* APSS */ + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd3_default &pinctrl_rxd3_default>; +}; + +&uart5 { + status = "okay"; +}; + +&lpc_ctrl { + status = "okay"; + memory-region = <&flash_memory>; + flash = <&spi1>; +}; + +&mac0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii1_default>; + use-ncsi; +}; + +&mac1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>; +}; + +&i2c0 { + /* LCD */ + status = "okay"; +}; + +&i2c1 { + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c256"; + reg = <0x50>; + label = "fru"; + }; + +}; + +&i2c2 { + status = "okay"; + + tmp112@48 { + compatible = "ti,tmp112"; + reg = <0x48>; + label = "inlet"; + }; + + tmp112@49 { + compatible = "ti,tmp112"; + reg = <0x49>; + label = "outlet"; + }; + + i2c-switch@70 { + compatible = "nxp,pca9546"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + tmp112@4a { + compatible = "ti,tmp112"; + reg = <0x4a>; + label = "psu_inlet"; + }; + + }; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + tmp112@4a { + compatible = "ti,tmp112"; + reg = <0x4a>; + label = "ocp_zone"; + }; + }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + + tmp112@4a { + compatible = "ti,tmp112"; + reg = <0x4a>; + label = "bmc_zone"; + }; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + + tmp112@7c { + compatible = "microchip,emc1413"; + reg = <0x7c>; + }; + }; + + }; +}; + +&i2c3 { + /* Riser Card */ + status = "okay"; +}; + +&i2c4 { + status = "okay"; + + rtc@68 { + compatible = "dallas,ds3232"; + reg = <0x68>; + }; +}; + +&i2c5 { + /* vr */ + status = "okay"; +}; + +&i2c6 { + /* bp card */ + status = "okay"; +}; + +&i2c7 { + status = "okay"; + + i2c-switch@70 { + compatible = "nxp,pca9546"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + adm1278@10 { + compatible = "adi,adm1278"; + reg = <0x10>; + }; + + adm1278@13 { + compatible = "adi,adm1278"; + reg = <0x13>; + }; + + adm1278@50 { + compatible = "adi,adm1278"; + reg = <0x50>; + }; + + adm1278@53 { + compatible = "adi,adm1278"; + reg = <0x53>; + }; + + }; + + /*pcie riser*/ + + }; +}; + +&i2c8 { + status = "okay"; + + pca0: pca9555@20 { + compatible = "nxp,pca9555"; + reg = <0x20>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + gpio@0 { + reg = <0>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@1 { + reg = <1>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@2 { + reg = <2>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@3 { + reg = <3>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@4 { + reg = <4>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@5 { + reg = <5>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@6 { + reg = <6>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@7 { + reg = <7>; + type = <PCA955X_TYPE_GPIO>; + }; + + }; + + pca1: pca9555@21 { + compatible = "nxp,pca9555"; + reg = <0x21>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + gpio@0 { + reg = <0>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@1 { + reg = <1>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@2 { + reg = <2>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@3 { + reg = <3>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@4 { + reg = <4>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@5 { + reg = <5>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@6 { + reg = <6>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@7 { + reg = <7>; + type = <PCA955X_TYPE_GPIO>; + }; + }; + + pca2: pca9555@22 { + compatible = "nxp,pca9555"; + reg = <0x22>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + gpio@0 { + reg = <0>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@1 { + reg = <1>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@2 { + reg = <2>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@3 { + reg = <3>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@4 { + reg = <4>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@5 { + reg = <5>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@6 { + reg = <6>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@7 { + reg = <7>; + type = <PCA955X_TYPE_GPIO>; + }; + }; + + pca3: pca9555@23 { + compatible = "nxp,pca9555"; + reg = <0x23>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + gpio@0 { + reg = <0>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@1 { + reg = <1>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@2 { + reg = <2>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@3 { + reg = <3>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@4 { + reg = <4>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@5 { + reg = <5>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@6 { + reg = <6>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@7 { + reg = <7>; + type = <PCA955X_TYPE_GPIO>; + }; + }; + + pca4: pca9555@24 { + compatible = "nxp,pca9555"; + reg = <0x24>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + gpio@0 { + reg = <0>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@1 { + reg = <1>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@2 { + reg = <2>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@3 { + reg = <3>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@4 { + reg = <4>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@5 { + reg = <5>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@6 { + reg = <6>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@7 { + reg = <7>; + type = <PCA955X_TYPE_GPIO>; + }; + }; + + pca5: pca9555@25 { + compatible = "nxp,pca9555"; + reg = <0x25>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + gpio@0 { + reg = <0>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@1 { + reg = <1>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@2 { + reg = <2>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@3 { + reg = <3>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@4 { + reg = <4>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@5 { + reg = <5>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@6 { + reg = <6>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@7 { + reg = <7>; + type = <PCA955X_TYPE_GPIO>; + }; + }; + +}; + +&i2c9 { + /* cpld */ + status = "okay"; +}; + +&i2c10 { + /* hdd bp */ + status = "okay"; +}; + +&i2c11 { + status = "okay"; + + power-supply@58 { + compatible = "pmbus"; + reg = <0x58>; + }; + + power-supply@5a { + compatible = "pmbus"; + reg = <0x5a>; + }; +}; + +&i2c12 { + /* odcc */ + status = "okay"; +}; + +&vuart { + status = "okay"; +}; + +&gfx { + status = "okay"; + memory-region = <&gfx_memory>; +}; + +&pinctrl { + aspeed,external-nodes = <&gfx &lhc>; +}; + +&gpio { + pin_gpio_b7 { + gpio-hog; + gpios = <ASPEED_GPIO(B,7) GPIO_ACTIVE_LOW>; + output-high; + line-name = "BMC_INIT_OK"; + }; +}; + +&wdt1 { + aspeed,reset-type = "none"; + aspeed,external-signal; + aspeed,ext-push-pull; + aspeed,ext-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdtrst1_default>; +}; + +&ibt { + status = "okay"; + +}; + +&adc { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default + &pinctrl_adc2_default &pinctrl_adc3_default &pinctrl_adc4_default + &pinctrl_adc5_default &pinctrl_adc6_default &pinctrl_adc7_default + &pinctrl_adc8_default &pinctrl_adc9_default &pinctrl_adc10_default + &pinctrl_adc11_default &pinctrl_adc12_default &pinctrl_adc13_default + &pinctrl_adc14_default &pinctrl_adc15_default>; +}; + +&vhub { + status = "okay"; +}; + +&video { + status = "okay"; + memory-region = <&video_engine_memory>; +}; + +&pwm_tacho { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default + &pinctrl_pwm2_default &pinctrl_pwm3_default + &pinctrl_pwm4_default &pinctrl_pwm5_default + &pinctrl_pwm6_default &pinctrl_pwm7_default>; + + fan@0 { + reg = <0x00>; + aspeed,fan-tach-ch = /bits/ 8 <0x00 0x01>; + }; + + fan@1 { + reg = <0x01>; + aspeed,fan-tach-ch = /bits/ 8 <0x02 0x03>; + }; + + fan@2 { + reg = <0x02>; + aspeed,fan-tach-ch = /bits/ 8 <0x04 0x05>; + }; + + fan@3 { + reg = <0x03>; + aspeed,fan-tach-ch = /bits/ 8 <0x06 0x07>; + }; + + fan@4 { + reg = <0x04>; + aspeed,fan-tach-ch = /bits/ 8 <0x08 0x09>; + }; + + fan@5 { + reg = <0x05>; + aspeed,fan-tach-ch = /bits/ 8 <0x0a 0x0b>; + }; + + fan@6 { + reg = <0x06>; + aspeed,fan-tach-ch = /bits/ 8 <0x0c 0x0d>; + }; + + fan@7 { + reg = <0x07>; + aspeed,fan-tach-ch = /bits/ 8 <0x0e 0x0f>; + }; + +}; + +#include "ibm-power9-dual.dtsi" diff --git a/dts/src/arm/aspeed-bmc-lenovo-hr630.dts b/dts/src/arm/aspeed-bmc-lenovo-hr630.dts new file mode 100644 index 0000000000..d3695a32e8 --- /dev/null +++ b/dts/src/arm/aspeed-bmc-lenovo-hr630.dts @@ -0,0 +1,566 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Device Tree file for Lenovo Hr630 platform + * + * Copyright (C) 2019-present Lenovo + */ + +/dts-v1/; + +#include "aspeed-g5.dtsi" +#include <dt-bindings/gpio/aspeed-gpio.h> + +/ { + model = "HR630 BMC"; + compatible = "lenovo,hr630-bmc", "aspeed,ast2500"; + + aliases { + i2c14 = &i2c_rbp; + i2c15 = &i2c_fbp1; + i2c16 = &i2c_fbp2; + i2c17 = &i2c_fbp3; + i2c18 = &i2c_riser2; + i2c19 = &i2c_pcie4; + i2c20 = &i2c_riser1; + i2c21 = &i2c_ocp; + }; + + chosen { + stdout-path = &uart5; + bootargs = "console=tty0 console=ttyS4,115200 earlyprintk"; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x20000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + flash_memory: region@98000000 { + no-map; + reg = <0x98000000 0x00100000>; /* 1M */ + }; + + gfx_memory: framebuffer { + size = <0x01000000>; + alignment = <0x01000000>; + compatible = "shared-dma-pool"; + reusable; + }; + }; + + leds { + compatible = "gpio-leds"; + + heartbeat { + gpios = <&gpio ASPEED_GPIO(J, 1) GPIO_ACTIVE_LOW>; + }; + + fault { + gpios = <&gpio ASPEED_GPIO(J, 0) GPIO_ACTIVE_LOW>; + }; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, + <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>, + <&adc 8>, <&adc 9>, <&adc 10>, + <&adc 12>, <&adc 13>, <&adc 14>; + }; + +}; + +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bmc"; + spi-max-frequency = <50000000>; +#include "openbmc-flash-layout.dtsi" + }; +}; + +&lpc_ctrl { + status = "okay"; + memory-region = <&flash_memory>; + flash = <&spi1>; +}; + +&uart1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd1_default + &pinctrl_rxd1_default>; +}; + +&uart2 { + /* Rear RS-232 connector */ + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd2_default + &pinctrl_rxd2_default + &pinctrl_nrts2_default + &pinctrl_ndtr2_default + &pinctrl_ndsr2_default + &pinctrl_ncts2_default + &pinctrl_ndcd2_default + &pinctrl_nri2_default>; +}; + +&uart3 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd3_default + &pinctrl_rxd3_default>; +}; + +&uart5 { + status = "okay"; +}; + +&ibt { + status = "okay"; +}; + +&mac0 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii1_default>; + use-ncsi; +}; + +&mac1 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>; +}; + +&adc { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc0_default + &pinctrl_adc1_default + &pinctrl_adc2_default + &pinctrl_adc3_default + &pinctrl_adc4_default + &pinctrl_adc5_default + &pinctrl_adc6_default + &pinctrl_adc7_default + &pinctrl_adc8_default + &pinctrl_adc9_default + &pinctrl_adc10_default + &pinctrl_adc12_default + &pinctrl_adc13_default + &pinctrl_adc14_default>; +}; + +&i2c0 { + status = "okay"; + /* temp1 inlet */ + tmp75@4e { + compatible = "national,lm75"; + reg = <0x4e>; + }; +}; + +&i2c1 { + status = "okay"; + /* temp2 outlet */ + tmp75@4d { + compatible = "national,lm75"; + reg = <0x4d>; + }; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; +}; + +&i2c4 { + status = "okay"; +}; + +&i2c5 { + status = "okay"; +}; + +&i2c6 { + status = "okay"; + /* Slot 0, + * Slot 1, + * Slot 2, + * Slot 3 + */ + + i2c-switch@70 { + compatible = "nxp,pca9545"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; /* may use mux@70 next. */ + + i2c_rbp: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + i2c_fbp1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + i2c_fbp2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + i2c_fbp3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; +}; + +&i2c7 { + status = "okay"; + + /* Slot 0, + * Slot 1, + * Slot 2, + * Slot 3 + */ + i2c-switch@76 { + compatible = "nxp,pca9546"; + reg = <0x76>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; /* may use mux@76 next. */ + + i2c_riser2: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + i2c_pcie4: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + i2c_riser1: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + i2c_ocp: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; +}; + +&i2c8 { + status = "okay"; + + eeprom@57 { + compatible = "atmel,24c256"; + reg = <0x57>; + pagesize = <16>; + }; +}; + +&i2c9 { + status = "okay"; +}; + +&i2c10 { + status = "okay"; +}; + +&i2c11 { + status = "okay"; +}; + +&i2c12 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&uhci { + status = "okay"; +}; + +&gfx { + status = "okay"; + memory-region = <&gfx_memory>; +}; + +&pwm_tacho { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_default + &pinctrl_pwm1_default + &pinctrl_pwm2_default + &pinctrl_pwm3_default + &pinctrl_pwm4_default + &pinctrl_pwm5_default + &pinctrl_pwm6_default>; + + fan@0 { + reg = <0x00>; + aspeed,fan-tach-ch = /bits/ 8 <0x00>; + }; + + fan@1 { + reg = <0x00>; + aspeed,fan-tach-ch = /bits/ 8 <0x01>; + }; + + fan@2 { + reg = <0x01>; + aspeed,fan-tach-ch = /bits/ 8 <0x02>; + }; + + fan@3 { + reg = <0x01>; + aspeed,fan-tach-ch = /bits/ 8 <0x03>; + }; + + fan@4 { + reg = <0x02>; + aspeed,fan-tach-ch = /bits/ 8 <0x04>; + }; + + fan@5 { + reg = <0x02>; + aspeed,fan-tach-ch = /bits/ 8 <0x05>; + }; + + fan@6 { + reg = <0x03>; + aspeed,fan-tach-ch = /bits/ 8 <0x06>; + }; + + fan@7 { + reg = <0x03>; + aspeed,fan-tach-ch = /bits/ 8 <0x07>; + }; + + fan@8 { + reg = <0x04>; + aspeed,fan-tach-ch = /bits/ 8 <0x08>; + }; + + fan@9 { + reg = <0x04>; + aspeed,fan-tach-ch = /bits/ 8 <0x09>; + }; + + fan@10 { + reg = <0x05>; + aspeed,fan-tach-ch = /bits/ 8 <0x0a>; + }; + + fan@11 { + reg = <0x05>; + aspeed,fan-tach-ch = /bits/ 8 <0x0b>; + }; + + fan@12 { + reg = <0x06>; + aspeed,fan-tach-ch = /bits/ 8 <0x0c>; + }; + + fan@13 { + reg = <0x06>; + aspeed,fan-tach-ch = /bits/ 8 <0x0d>; + }; +}; + +&gpio { + + pin_gpio_b5 { + gpio-hog; + gpios = <ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "IRQ_BMC_PCH_SMI_LPC_N"; + }; + + pin_gpio_f0 { + gpio-hog; + gpios = <ASPEED_GPIO(F, 0) GPIO_ACTIVE_HIGH>; + output-low; + line-name = "IRQ_BMC_PCH_NMI_R"; + }; + + pin_gpio_f3 { + gpio-hog; + gpios = <ASPEED_GPIO(F, 3) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "I2C_BUS0_RST_OUT_N"; + }; + + pin_gpio_f4 { + gpio-hog; + gpios = <ASPEED_GPIO(F, 4) GPIO_ACTIVE_HIGH>; + output-low; + line-name = "FM_SKT0_FAULT_LED"; + }; + + pin_gpio_f5 { + gpio-hog; + gpios = <ASPEED_GPIO(F, 5) GPIO_ACTIVE_HIGH>; + output-low; + line-name = "FM_SKT1_FAULT_LED"; + }; + + pin_gpio_g4 { + gpio-hog; + gpios = <ASPEED_GPIO(G, 4) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "FAN_PWR_CTL_N"; + }; + + pin_gpio_g7 { + gpio-hog; + gpios = <ASPEED_GPIO(G, 7) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "RST_BMC_PCIE_I2CMUX_N"; + }; + + pin_gpio_h2 { + gpio-hog; + gpios = <ASPEED_GPIO(H, 2) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "PSU1_FFS_N_R"; + }; + + pin_gpio_h3 { + gpio-hog; + gpios = <ASPEED_GPIO(H, 3) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "PSU2_FFS_N_R"; + }; + + pin_gpio_i3 { + gpio-hog; + gpios = <ASPEED_GPIO(I, 3) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "BMC_INTRUDED_COVER"; + }; + + pin_gpio_j2 { + gpio-hog; + gpios = <ASPEED_GPIO(J, 2) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "BMC_BIOS_UPDATE_N"; + }; + + pin_gpio_j3 { + gpio-hog; + gpios = <ASPEED_GPIO(J, 3) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "RST_BMC_HDD_I2CMUX_N"; + }; + + pin_gpio_s2 { + gpio-hog; + gpios = <ASPEED_GPIO(S, 2) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "BMC_VGA_SW"; + }; + + pin_gpio_s4 { + gpio-hog; + gpios = <ASPEED_GPIO(S, 4) GPIO_ACTIVE_HIGH>; + output; + line-name = "VBAT_EN_N"; + }; + + pin_gpio_s6 { + gpio-hog; + gpios = <ASPEED_GPIO(S, 6) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "PU_BMC_GPIOS6"; + }; + + pin_gpio_y0 { + gpio-hog; + gpios = <ASPEED_GPIO(Y, 0) GPIO_ACTIVE_HIGH>; + output-low; + line-name = "BMC_NCSI_MUX_CTL_S0"; + }; + + pin_gpio_y1 { + gpio-hog; + gpios = <ASPEED_GPIO(Y, 1) GPIO_ACTIVE_HIGH>; + output-low; + line-name = "BMC_NCSI_MUX_CTL_S1"; + }; + + pin_gpio_z0 { + gpio-hog; + gpios = <ASPEED_GPIO(Z, 0) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "I2C_RISER2_INT_N"; + }; + + pin_gpio_z2 { + gpio-hog; + gpios = <ASPEED_GPIO(Z, 2) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "I2C_RISER2_RESET_N"; + }; + + pin_gpio_z3 { + gpio-hog; + gpios = <ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "FM_BMC_PCH_SCI_LPC_N"; + }; + + pin_gpio_z7 { + gpio-hog; + gpios = <ASPEED_GPIO(Z, 7) GPIO_ACTIVE_HIGH>; + output-low; + line-name = "BMC_POST_CMPLT_N"; + }; + + pin_gpio_aa0 { + gpio-hog; + gpios = <ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>; + output-low; + line-name = "HOST_BMC_USB_SEL"; + }; + + pin_gpio_aa5 { + gpio-hog; + gpios = <ASPEED_GPIO(AA, 5) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "I2C_BUS1_RST_OUT_N"; + }; + +}; diff --git a/dts/src/arm/aspeed-bmc-microsoft-olympus.dts b/dts/src/arm/aspeed-bmc-microsoft-olympus.dts new file mode 100644 index 0000000000..73319917cb --- /dev/null +++ b/dts/src/arm/aspeed-bmc-microsoft-olympus.dts @@ -0,0 +1,207 @@ +//SPDX-License-Identifier: GPL-2.0+ + +/dts-v1/; + +#include "aspeed-g4.dtsi" +#include <dt-bindings/gpio/aspeed-gpio.h> + +/ { + model = "Olympus BMC"; + compatible = "microsoft,olympus-bmc", "aspeed,ast2400"; + + chosen { + stdout-path = &uart5; + bootargs = "console=ttyS4,115200 earlyprintk"; + }; + + memory@40000000 { + reg = <0x40000000 0x20000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + vga_memory: framebuffer@5f000000 { + no-map; + reg = <0x5f000000 0x01000000>; /* 16M */ + }; + }; + + leds { + compatible = "gpio-leds"; + + bmc_heartbeat { + gpios = <&gpio ASPEED_GPIO(B, 0) GPIO_ACTIVE_LOW>; + }; + + power_green { + gpios = <&gpio ASPEED_GPIO(U, 2) GPIO_ACTIVE_HIGH>; + }; + + power_amber { + gpios = <&gpio ASPEED_GPIO(U, 3) GPIO_ACTIVE_HIGH>; + }; + + identify { + gpios = <&gpio ASPEED_GPIO(Q, 5) GPIO_ACTIVE_LOW>; + }; + + fault { + gpios = <&gpio ASPEED_GPIO(A, 1) GPIO_ACTIVE_LOW>; + }; + }; + + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, + <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>; + }; +}; + +&adc { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc0_default + &pinctrl_adc1_default + &pinctrl_adc2_default + &pinctrl_adc3_default + &pinctrl_adc4_default + &pinctrl_adc5_default + &pinctrl_adc6_default + &pinctrl_adc7_default>; +}; + +&fmc { + status = "okay"; + + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bmc"; +#include "openbmc-flash-layout.dtsi" + }; +}; + +&spi { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1_default>; + + flash@0 { + status = "okay"; + m25p,fast-read; + label = "pnor"; + }; +}; + +&uart5 { + status = "okay"; +}; + +&mac0 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>; +}; + +&i2c0 { + status = "okay"; +}; + +&i2c1 { + status = "okay"; + + tmp421@4c { + compatible = "ti,tmp421"; + reg = <0x4c>; + }; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; +}; + +&i2c4 { + status = "okay"; + clock-frequency = <100000>; +}; + +&i2c5 { + status = "okay"; +}; + +&i2c6 { + status = "okay"; + + tmp421@4c { + compatible = "ti,tmp421"; + reg = <0x4c>; + }; +}; + +&i2c7 { + status = "okay"; +}; + +&vuart { + status = "okay"; +}; + +&wdt2 { + status = "okay"; +}; + +&lpc_ctrl { + status = "okay"; +}; + +&pwm_tacho { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_default + &pinctrl_pwm1_default + &pinctrl_pwm2_default + &pinctrl_pwm3_default + &pinctrl_pwm4_default + &pinctrl_pwm5_default + &pinctrl_pwm6_default>; + + fan@0 { + reg = <0x00>; + aspeed,fan-tach-ch = /bits/ 8 <0x00>; + }; + + fan@1 { + reg = <0x01>; + aspeed,fan-tach-ch = /bits/ 8 <0x01>; + }; + + fan@2 { + reg = <0x02>; + aspeed,fan-tach-ch = /bits/ 8 <0x02>; + }; + + fan@3 { + reg = <0x03>; + aspeed,fan-tach-ch = /bits/ 8 <0x03>; + }; + + fan@4 { + reg = <0x04>; + aspeed,fan-tach-ch = /bits/ 8 <0x04>; + }; + + fan@5 { + reg = <0x05>; + aspeed,fan-tach-ch = /bits/ 8 <0x05>; + }; + +}; diff --git a/dts/src/arm/aspeed-bmc-opp-lanyang.dts b/dts/src/arm/aspeed-bmc-opp-lanyang.dts index 024e52a6cd..de95112e2a 100644 --- a/dts/src/arm/aspeed-bmc-opp-lanyang.dts +++ b/dts/src/arm/aspeed-bmc-opp-lanyang.dts @@ -322,3 +322,5 @@ &adc { status = "okay"; }; + +#include "ibm-power9-dual.dtsi" diff --git a/dts/src/arm/aspeed-bmc-opp-palmetto.dts b/dts/src/arm/aspeed-bmc-opp-palmetto.dts index b249da80fb..b0cb34ccb1 100644 --- a/dts/src/arm/aspeed-bmc-opp-palmetto.dts +++ b/dts/src/arm/aspeed-bmc-opp-palmetto.dts @@ -347,3 +347,25 @@ line-name = "BMC_TPM_INT_N"; }; }; + +&fsi { + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom@1000 { + compatible = "ibm,fsi2pib"; + reg = <0x1000 0x400>; + }; + + fsi_hub0: hub@3400 { + compatible = "ibm,fsi-master-hub"; + reg = <0x3400 0x400>; + #address-cells = <2>; + #size-cells = <0>; + no-scan-on-init; + }; + }; +}; diff --git a/dts/src/arm/aspeed-bmc-opp-romulus.dts b/dts/src/arm/aspeed-bmc-opp-romulus.dts index 418a1988b2..9628ecb879 100644 --- a/dts/src/arm/aspeed-bmc-opp-romulus.dts +++ b/dts/src/arm/aspeed-bmc-opp-romulus.dts @@ -42,6 +42,13 @@ compatible = "shared-dma-pool"; reusable; }; + + video_engine_memory: jpegbuffer { + size = <0x02000000>; /* 32M */ + alignment = <0x01000000>; + compatible = "shared-dma-pool"; + reusable; + }; }; leds { @@ -304,3 +311,10 @@ &adc { status = "okay"; }; + +&video { + status = "okay"; + memory-region = <&video_engine_memory>; +}; + +#include "ibm-power9-dual.dtsi" diff --git a/dts/src/arm/aspeed-bmc-opp-swift.dts b/dts/src/arm/aspeed-bmc-opp-swift.dts new file mode 100644 index 0000000000..caac895c60 --- /dev/null +++ b/dts/src/arm/aspeed-bmc-opp-swift.dts @@ -0,0 +1,966 @@ +// SPDX-License-Identifier: GPL-2.0+ +/dts-v1/; +#include "aspeed-g5.dtsi" +#include <dt-bindings/gpio/aspeed-gpio.h> +#include <dt-bindings/leds/leds-pca955x.h> + +/ { + model = "Swift BMC"; + compatible = "ibm,swift-bmc", "aspeed,ast2500"; + + chosen { + stdout-path = &uart5; + bootargs = "console=ttyS4,115200 earlyprintk"; + }; + + memory@80000000 { + reg = <0x80000000 0x20000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + flash_memory: region@98000000 { + no-map; + reg = <0x98000000 0x04000000>; /* 64M */ + }; + + gfx_memory: framebuffer { + size = <0x01000000>; + alignment = <0x01000000>; + compatible = "shared-dma-pool"; + reusable; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + air-water { + label = "air-water"; + gpios = <&gpio ASPEED_GPIO(B, 5) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(B, 5)>; + }; + + checkstop { + label = "checkstop"; + gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(J, 2)>; + }; + + ps0-presence { + label = "ps0-presence"; + gpios = <&gpio ASPEED_GPIO(R, 7) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(R, 7)>; + }; + + ps1-presence { + label = "ps1-presence"; + gpios = <&gpio ASPEED_GPIO(N, 0) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(N, 0)>; + }; + + oppanel-presence { + label = "oppanel-presence"; + gpios = <&gpio ASPEED_GPIO(A, 7) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(A, 7)>; + }; + + opencapi-riser-presence { + label = "opencapi-riser-presence"; + gpios = <&gpio ASPEED_GPIO(I, 0) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(I, 0)>; + }; + }; + + iio-hwmon-battery { + compatible = "iio-hwmon"; + io-channels = <&adc 12>; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <1000>; + + scm0-presence { + label = "scm0-presence"; + gpios = <&pca9552 6 GPIO_ACTIVE_LOW>; + linux,code = <6>; + }; + + scm1-presence { + label = "scm1-presence"; + gpios = <&pca9552 7 GPIO_ACTIVE_LOW>; + linux,code = <7>; + }; + + cpu0vrm-presence { + label = "cpu0vrm-presence"; + gpios = <&pca9552 12 GPIO_ACTIVE_LOW>; + linux,code = <12>; + }; + + cpu1vrm-presence { + label = "cpu1vrm-presence"; + gpios = <&pca9552 13 GPIO_ACTIVE_LOW>; + linux,code = <13>; + }; + + fan0-presence { + label = "fan0-presence"; + gpios = <&pca0 5 GPIO_ACTIVE_LOW>; + linux,code = <5>; + }; + + fan1-presence { + label = "fan1-presence"; + gpios = <&pca0 6 GPIO_ACTIVE_LOW>; + linux,code = <6>; + }; + + fan2-presence { + label = "fan2-presence"; + gpios = <&pca0 7 GPIO_ACTIVE_LOW>; + linux,code = <7>; + }; + + fan3-presence { + label = "fan3-presence"; + gpios = <&pca0 8 GPIO_ACTIVE_LOW>; + linux,code = <8>; + }; + + fanboost-presence { + label = "fanboost-presence"; + gpios = <&pca0 9 GPIO_ACTIVE_LOW>; + linux,code = <9>; + }; + }; + + leds { + compatible = "gpio-leds"; + + fan0 { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca0 0 GPIO_ACTIVE_LOW>; + }; + + fan1 { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca0 1 GPIO_ACTIVE_LOW>; + }; + + fan2 { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca0 2 GPIO_ACTIVE_LOW>; + }; + + fan3 { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca0 3 GPIO_ACTIVE_LOW>; + }; + + fanboost { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca0 4 GPIO_ACTIVE_LOW>; + }; + + front-fault { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca1 2 GPIO_ACTIVE_LOW>; + }; + + front-power { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca1 3 GPIO_ACTIVE_LOW>; + }; + + front-id { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca1 0 GPIO_ACTIVE_LOW>; + }; + + rear-fault { + gpios = <&gpio ASPEED_GPIO(N, 2) GPIO_ACTIVE_LOW>; + }; + + rear-id { + gpios = <&gpio ASPEED_GPIO(N, 4) GPIO_ACTIVE_LOW>; + }; + }; + + fsi: gpio-fsi { + compatible = "fsi-master-gpio", "fsi-master"; + #address-cells = <2>; + #size-cells = <0>; + no-gpio-delays; + + clock-gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>; + data-gpios = <&gpio ASPEED_GPIO(E, 0) GPIO_ACTIVE_HIGH>; + mux-gpios = <&gpio ASPEED_GPIO(P, 4) GPIO_ACTIVE_HIGH>; + enable-gpios = <&gpio ASPEED_GPIO(P, 0) GPIO_ACTIVE_HIGH>; + trans-gpios = <&gpio ASPEED_GPIO(P, 3) GPIO_ACTIVE_HIGH>; + }; + + iio-hwmon-dps310 { + compatible = "iio-hwmon"; + io-channels = <&dps 0>; + }; + +}; + +&fmc { + status = "okay"; + + flash@0 { + status = "okay"; + label = "bmc"; + m25p,fast-read; + spi-max-frequency = <100000000>; + partitions { + #address-cells = < 1 >; + #size-cells = < 1 >; + compatible = "fixed-partitions"; + u-boot@0 { + reg = < 0 0x60000 >; + label = "u-boot"; + }; + u-boot-env@60000 { + reg = < 0x60000 0x20000 >; + label = "u-boot-env"; + }; + obmc-ubi@80000 { + reg = < 0x80000 0x7F80000>; + label = "obmc-ubi"; + }; + }; + }; + + flash@1 { + status = "okay"; + label = "alt-bmc"; + m25p,fast-read; + spi-max-frequency = <100000000>; + partitions { + #address-cells = < 1 >; + #size-cells = < 1 >; + compatible = "fixed-partitions"; + u-boot@0 { + reg = < 0 0x60000 >; + label = "alt-u-boot"; + }; + u-boot-env@60000 { + reg = < 0x60000 0x20000 >; + label = "alt-u-boot-env"; + }; + obmc-ubi@80000 { + reg = < 0x80000 0x7F80000>; + label = "alt-obmc-ubi"; + }; + }; + }; +}; + +&spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1_default>; + + flash@0 { + status = "okay"; + label = "pnor"; + m25p,fast-read; + spi-max-frequency = <100000000>; + }; +}; + +&uart1 { + /* Rear RS-232 connector */ + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd1_default + &pinctrl_rxd1_default + &pinctrl_nrts1_default + &pinctrl_ndtr1_default + &pinctrl_ndsr1_default + &pinctrl_ncts1_default + &pinctrl_ndcd1_default + &pinctrl_nri1_default>; +}; + +&uart2 { + /* APSS */ + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>; +}; + +&uart5 { + status = "okay"; +}; + +&lpc_ctrl { + status = "okay"; + memory-region = <&flash_memory>; + flash = <&spi1>; +}; + +&mac0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii1_default>; + use-ncsi; +}; + +&i2c2 { + status = "okay"; + + /* MUX -> + * Samtec 1 + * Samtec 2 + */ +}; + +&i2c3 { + status = "okay"; + + max31785@52 { + compatible = "maxim,max31785a"; + reg = <0x52>; + #address-cells = <1>; + #size-cells = <0>; + + fan@0 { + compatible = "pmbus-fan"; + reg = <0>; + tach-pulses = <2>; + maxim,fan-rotor-input = "tach"; + maxim,fan-pwm-freq = <25000>; + maxim,fan-no-watchdog; + maxim,fan-no-fault-ramp; + maxim,fan-ramp = <2>; + maxim,fan-fault-pin-mon; + }; + + fan@1 { + compatible = "pmbus-fan"; + reg = <1>; + tach-pulses = <2>; + maxim,fan-rotor-input = "tach"; + maxim,fan-pwm-freq = <25000>; + maxim,fan-no-watchdog; + maxim,fan-no-fault-ramp; + maxim,fan-ramp = <2>; + maxim,fan-fault-pin-mon; + }; + + fan@2 { + compatible = "pmbus-fan"; + reg = <2>; + tach-pulses = <2>; + maxim,fan-rotor-input = "tach"; + maxim,fan-pwm-freq = <25000>; + maxim,fan-no-watchdog; + maxim,fan-no-fault-ramp; + maxim,fan-ramp = <2>; + maxim,fan-fault-pin-mon; + }; + + fan@3 { + compatible = "pmbus-fan"; + reg = <3>; + tach-pulses = <2>; + maxim,fan-rotor-input = "tach"; + maxim,fan-pwm-freq = <25000>; + maxim,fan-no-watchdog; + maxim,fan-no-fault-ramp; + maxim,fan-ramp = <2>; + maxim,fan-fault-pin-mon; + }; + + fan@4 { + compatible = "pmbus-fan"; + reg = <4>; + tach-pulses = <2>; + maxim,fan-rotor-input = "tach"; + maxim,fan-pwm-freq = <25000>; + maxim,fan-no-watchdog; + maxim,fan-no-fault-ramp; + maxim,fan-ramp = <2>; + maxim,fan-fault-pin-mon; + }; + }; + + pca0: pca9552@60 { + compatible = "nxp,pca9552"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + gpio@0 { + reg = <0>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@1 { + reg = <1>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@2 { + reg = <2>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@3 { + reg = <3>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@4 { + reg = <4>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@5 { + reg = <5>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@6 { + reg = <6>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@7 { + reg = <7>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@8 { + reg = <8>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@9 { + reg = <9>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@10 { + reg = <10>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@11 { + reg = <11>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@12 { + reg = <12>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@13 { + reg = <13>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@14 { + reg = <14>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@15 { + reg = <15>; + type = <PCA955X_TYPE_GPIO>; + }; + }; + + power-supply@68 { + compatible = "ibm,cffps1"; + reg = <0x68>; + }; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + power-supply@69 { + compatible = "ibm,cffps1"; + reg = <0x69>; + }; + + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; +}; + +&i2c7 { + status = "okay"; + + dps: dps310@76 { + compatible = "infineon,dps310"; + reg = <0x76>; + #io-channel-cells = <0>; + }; + + tmp275@48 { + compatible = "ti,tmp275"; + reg = <0x48>; + }; + + si7021a20@20 { + compatible = "si,si7021a20"; + reg = <0x20>; + }; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + pca1: pca9551@60 { + compatible = "nxp,pca9551"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + gpio@0 { + reg = <0>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@1 { + reg = <1>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@2 { + reg = <2>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@3 { + reg = <3>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@4 { + reg = <4>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@5 { + reg = <5>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@6 { + reg = <6>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@7 { + reg = <7>; + type = <PCA955X_TYPE_GPIO>; + }; + }; +}; + +&i2c8 { + status = "okay"; + + pca9552: pca9552@60 { + compatible = "nxp,pca9552"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = "PS_SMBUS_RESET_N", "APSS_RESET_N", + "GPU0_TH_OVERT_N_BUFF", "GPU1_TH_OVERT_N_BUFF", + "GPU2_TH_OVERT_N_BUFF", "GPU3_TH_OVERT_N_BUFF", + "P9_SCM0_PRES", "P9_SCM1_PRES", + "GPU0_PWR_GOOD_BUFF", "GPU1_PWR_GOOD_BUFF", + "GPU2_PWR_GOOD_BUFF", "GPU3_PWR_GOOD_BUFF", + "PRESENT_VRM_CP0_N", "PRESENT_VRM_CP1_N", + "12V_BREAKER_FLT_N", "THROTTLE_UNLATCHED_N"; + + gpio@0 { + reg = <0>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@1 { + reg = <1>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@2 { + reg = <2>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@3 { + reg = <3>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@4 { + reg = <4>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@5 { + reg = <5>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@6 { + reg = <6>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@7 { + reg = <7>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@8 { + reg = <8>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@9 { + reg = <9>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@10 { + reg = <10>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@11 { + reg = <11>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@12 { + reg = <12>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@13 { + reg = <13>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@14 { + reg = <14>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@15 { + reg = <15>; + type = <PCA955X_TYPE_GPIO>; + }; + }; + + rtc@32 { + compatible = "epson,rx8900"; + reg = <0x32>; + }; + + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; + + ucd90160@64 { + compatible = "ti,ucd90160"; + reg = <0x64>; + }; +}; + +&i2c9 { + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + tmp423a@4c { + compatible = "ti,tmp423"; + reg = <0x4c>; + }; + + ir35221@71 { + compatible = "infineon,ir35221"; + reg = <0x71>; + }; + + ir35221@72 { + compatible = "infineon,ir35221"; + reg = <0x72>; + }; + + pca2: pca9539@74 { + compatible = "nxp,pca9539"; + reg = <0x74>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + gpio@0 { + reg = <0>; + }; + + gpio@1 { + reg = <1>; + }; + + gpio@2 { + reg = <2>; + }; + + gpio@3 { + reg = <3>; + }; + + gpio@4 { + reg = <4>; + }; + + gpio@5 { + reg = <5>; + }; + + gpio@6 { + reg = <6>; + }; + + gpio@7 { + reg = <7>; + }; + + gpio@8 { + reg = <8>; + }; + + gpio@9 { + reg = <9>; + }; + + gpio@10 { + reg = <10>; + }; + + gpio@11 { + reg = <11>; + }; + + gpio@12 { + reg = <12>; + }; + + gpio@13 { + reg = <13>; + }; + + gpio@14 { + reg = <14>; + }; + + gpio@15 { + reg = <15>; + }; + }; +}; + +&i2c10 { + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + tmp423a@4c { + compatible = "ti,tmp423"; + reg = <0x4c>; + }; + + ir35221@71 { + compatible = "infineon,ir35221"; + reg = <0x71>; + }; + + ir35221@72 { + compatible = "infineon,ir35221"; + reg = <0x72>; + }; + + pca3: pca9539@74 { + compatible = "nxp,pca9539"; + reg = <0x74>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + gpio@0 { + reg = <0>; + }; + + gpio@1 { + reg = <1>; + }; + + gpio@2 { + reg = <2>; + }; + + gpio@3 { + reg = <3>; + }; + + gpio@4 { + reg = <4>; + }; + + gpio@5 { + reg = <5>; + }; + + gpio@6 { + reg = <6>; + }; + + gpio@7 { + reg = <7>; + }; + + gpio@8 { + reg = <8>; + }; + + gpio@9 { + reg = <9>; + }; + + gpio@10 { + reg = <10>; + }; + + gpio@11 { + reg = <11>; + }; + + gpio@12 { + reg = <12>; + }; + + gpio@13 { + reg = <13>; + }; + + gpio@14 { + reg = <14>; + }; + + gpio@15 { + reg = <15>; + }; + }; +}; + +&i2c11 { + /* MUX + * -> PCIe Slot 0 + * -> PCIe Slot 1 + * -> PCIe Slot 2 + * -> PCIe Slot 3 + */ + status = "okay"; +}; + +&i2c12 { + status = "okay"; + + tmp275@48 { + compatible = "ti,tmp275"; + reg = <0x48>; + }; + + tmp275@4a { + compatible = "ti,tmp275"; + reg = <0x4a>; + }; +}; + +&i2c13 { + status = "okay"; +}; + +&vuart { + status = "okay"; +}; + +&gfx { + status = "okay"; + memory-region = <&gfx_memory>; +}; + +&pinctrl { + aspeed,external-nodes = <&gfx &lhc>; +}; + +&wdt1 { + aspeed,reset-type = "none"; + aspeed,external-signal; + aspeed,ext-push-pull; + aspeed,ext-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdtrst1_default>; +}; + +&wdt2 { + aspeed,alt-boot; +}; + +&ibt { + status = "okay"; +}; + +&adc { + status = "okay"; +}; + +#include "ibm-power9-dual.dtsi" diff --git a/dts/src/arm/aspeed-bmc-opp-vesnin.dts b/dts/src/arm/aspeed-bmc-opp-vesnin.dts new file mode 100644 index 0000000000..0b9e29c321 --- /dev/null +++ b/dts/src/arm/aspeed-bmc-opp-vesnin.dts @@ -0,0 +1,224 @@ +// SPDX-License-Identifier: GPL-2.0+ +// Copyright 2019 YADRO +/dts-v1/; + +#include "aspeed-g4.dtsi" +#include <dt-bindings/gpio/aspeed-gpio.h> + +/ { + model = "Vesnin BMC"; + compatible = "yadro,vesnin-bmc", "aspeed,ast2400"; + + chosen { + stdout-path = &uart5; + bootargs = "console=ttyS4,115200 earlyprintk"; + }; + + memory { + reg = <0x40000000 0x20000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + vga_memory: framebuffer@5f000000 { + no-map; + reg = <0x5f000000 0x01000000>; /* 16MB */ + }; + flash_memory: region@5c000000 { + no-map; + reg = <0x5c000000 0x02000000>; /* 32M */ + }; + }; + + leds { + compatible = "gpio-leds"; + + heartbeat { + gpios = <&gpio ASPEED_GPIO(R, 4) GPIO_ACTIVE_LOW>; + }; + power_red { + gpios = <&gpio ASPEED_GPIO(N, 1) GPIO_ACTIVE_LOW>; + }; + + id_blue { + gpios = <&gpio ASPEED_GPIO(O, 0) GPIO_ACTIVE_LOW>; + }; + + alarm_red { + gpios = <&gpio ASPEED_GPIO(N, 6) GPIO_ACTIVE_LOW>; + }; + + alarm_yel { + gpios = <&gpio ASPEED_GPIO(N, 7) GPIO_ACTIVE_HIGH>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + button_checkstop { + label = "checkstop"; + linux,code = <74>; + gpios = <&gpio ASPEED_GPIO(P, 5) GPIO_ACTIVE_LOW>; + }; + + button_identify { + label = "identify"; + linux,code = <152>; + gpios = <&gpio ASPEED_GPIO(O, 7) GPIO_ACTIVE_LOW>; + }; + }; +}; + +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bmc"; +#include "openbmc-flash-layout.dtsi" + }; +}; + +&spi { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1debug_default>; + + flash@0 { + status = "okay"; + label = "pnor"; + m25p,fast-read; + }; +}; + +&mac0 { + status = "okay"; + + use-ncsi; + no-hw-checksum; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii1_default>; +}; + + +&uart5 { + status = "okay"; +}; + +&lpc_ctrl { + status = "okay"; + memory-region = <&flash_memory>; + flash = <&spi>; +}; + +&ibt { + status = "okay"; +}; + +&uart3 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>; +}; + +&i2c0 { + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c256"; + reg = <0x50>; + pagesize = <64>; + }; +}; + +&i2c1 { + status = "okay"; + + tmp75@49 { + compatible = "ti,tmp75"; + reg = <0x49>; + }; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; +}; + +&i2c4 { + status = "okay"; + + occ-hwmon@50 { + compatible = "ibm,p8-occ-hwmon"; + reg = <0x50>; + }; +}; + +&i2c5 { + status = "okay"; + + occ-hwmon@51 { + compatible = "ibm,p8-occ-hwmon"; + reg = <0x51>; + }; +}; + +&i2c6 { + status = "okay"; + + w83795g@2f { + compatible = "nuvoton,w83795g"; + reg = <0x2f>; + }; +}; + +&i2c7 { + status = "okay"; + + occ-hwmon@56 { + compatible = "ibm,p8-occ-hwmon"; + reg = <0x56>; + }; +}; + +&i2c9 { + status = "okay"; +}; + +&i2c10 { + status = "okay"; +}; + +&i2c11 { + status = "okay"; + + occ-hwmon@57 { + compatible = "ibm,p8-occ-hwmon"; + reg = <0x57>; + }; +}; + +&i2c12 { + status = "okay"; + + rtc@68 { + compatible = "maxim,ds3231"; + reg = <0x68>; + }; +}; + +&i2c13 { + status = "okay"; +}; + +&vuart { + status = "okay"; +}; diff --git a/dts/src/arm/aspeed-bmc-opp-witherspoon.dts b/dts/src/arm/aspeed-bmc-opp-witherspoon.dts index f1356ca794..31ea34e14c 100644 --- a/dts/src/arm/aspeed-bmc-opp-witherspoon.dts +++ b/dts/src/arm/aspeed-bmc-opp-witherspoon.dts @@ -33,6 +33,13 @@ compatible = "shared-dma-pool"; reusable; }; + + video_engine_memory: jpegbuffer { + size = <0x02000000>; /* 32MM */ + alignment = <0x01000000>; + compatible = "shared-dma-pool"; + reusable; + }; }; gpio-keys { @@ -640,3 +647,10 @@ &vhub { status = "okay"; }; + +&video { + status = "okay"; + memory-region = <&video_engine_memory>; +}; + +#include "ibm-power9-dual.dtsi" diff --git a/dts/src/arm/aspeed-bmc-opp-zaius.dts b/dts/src/arm/aspeed-bmc-opp-zaius.dts index 2c5aa90a54..3062437831 100644 --- a/dts/src/arm/aspeed-bmc-opp-zaius.dts +++ b/dts/src/arm/aspeed-bmc-opp-zaius.dts @@ -7,6 +7,14 @@ model = "Zaius BMC"; compatible = "ingrasys,zaius-bmc", "aspeed,ast2500"; + aliases { + i2c15 = &i2cpcie0; + i2c16 = &i2cpcie1; + i2c17 = &i2cpcie2; + i2c19 = &i2cpcie3; + i2c20 = &i2cpcie4; + }; + chosen { stdout-path = &uart5; bootargs = "console=ttyS4,115200 earlyprintk"; @@ -223,6 +231,27 @@ reg = <0x71>; #address-cells = <1>; #size-cells = <0>; + + i2cpcie0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + i2cpcie1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + i2cpcie2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + i2ctpm: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; }; /* MUX1 PCA9546A @71h @@ -253,6 +282,17 @@ reg = <0x71>; #address-cells = <1>; #size-cells = <0>; + + i2cpcie3: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + i2cpcie4: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; }; /* MUX1 PCA9546A @71h @@ -296,33 +336,98 @@ reg = <0x54>; }; }; + + }; + + vrm@64 { + compatible = "isil,isl68137"; + reg = <0x64>; + }; + + vrm@40 { + compatible = "isil,isl68137"; + reg = <0x40>; + }; + + vrm@60 { + compatible = "isil,isl68137"; + reg = <0x60>; + }; + + vrm@43 { + compatible = "infineon,ir38064"; + reg = <0x43>; + }; + + vrm@41 { + compatible = "isil,isl68137"; + reg = <0x41>; }; /* Master selector PCA9541A @70h (other master: CPU0) * LM5066I PMBUS @10h */ - /* 12V Quarter Brick DC/DC Converter Q54SJ12050 @61h */ - power-brick@61 { + /* + * Brick will be one of these types/addresses. Depending + * on the board SKU only one is actually present and will successfully + * instantiate while the others will fail the probe operation. + * These are the PVT (and presumably beyond) addresses: + * 12V Quarter Brick DC/DC Converter Q54SJ12050 @6Ah + * 12V Quarter Brick DC/DC Converter Q54SH12050 @30h + */ + power-brick@6a { + compatible = "delta,dps800"; + reg = <0x6a>; + }; + power-brick@30 { compatible = "delta,dps800"; - reg = <0x61>; + reg = <0x30>; }; /* CPU0 VR ISL68137 0.7V, 0.96V PMBUS @64h */ /* CPU0 VR ISL68137 1.2V CH03 PMBUS @40h */ /* CPU0 VR ISL68137 0.8V PMBUS @60h */ - /* CPU0 VR 1.0V IR38064 I2C @11h, PMBUS @41h */ + /* CPU0 VR 1.0V IR38064 I2C @11h, PMBUS @43h */ /* CPU0 VR ISL68137 1.2V CH47 PMBUS @41h */ + /* Master selector PCA9541A @70h (other master: CPU0) + * LM5066I PMBUS @10h + */ }; &i2c8 { status = "okay"; - /* CPU1 VR ISL68137 0.7V, 0.96V PMBUS @65h */ - /* CPU1 VR ISL68137 1.2V CH03 PMBUS @44h */ - /* CPU1 VR ISL68137 0.8V PMBUS @61h */ + vrm@64 { + compatible = "isil,isl68137"; + reg = <0x64>; + }; + + vrm@40 { + compatible = "isil,isl68137"; + reg = <0x40>; + }; + + vrm@41 { + compatible = "isil,isl68137"; + reg = <0x41>; + }; + + vrm@42 { + compatible = "infineon,ir38064"; + reg = <0x42>; + }; + + vrm@60 { + compatible = "isil,isl68137"; + reg = <0x60>; + }; + + /* CPU1 VR ISL68137 0.7V, 0.96V PMBUS @64h */ + /* CPU1 VR ISL68137 1.2V CH03 PMBUS @40h */ + /* CPU1 VR ISL68137 1.2V CH47 PMBUS @41h */ /* CPU1 VR 1.0V IR38064 I2C @12h, PMBUS @42h */ - /* CPU0 VR ISL68137 1.2V CH47 PMBUS @45h */ + /* CPU1 VR ISL68137 0.8V PMBUS @60h */ }; @@ -435,3 +540,5 @@ &ibt { status = "okay"; }; + +#include "ibm-power9-dual.dtsi" diff --git a/dts/src/arm/aspeed-bmc-quanta-q71l.dts b/dts/src/arm/aspeed-bmc-quanta-q71l.dts index 0d7c6339da..a68ff0675c 100644 --- a/dts/src/arm/aspeed-bmc-quanta-q71l.dts +++ b/dts/src/arm/aspeed-bmc-quanta-q71l.dts @@ -112,6 +112,11 @@ &pinctrl_ddcclk_default &pinctrl_ddcdat_default>; }; +&p2a { + status = "okay"; + memory-region = <&vga_memory>; +}; + &ibt { status = "okay"; }; diff --git a/dts/src/arm/aspeed-g4.dtsi b/dts/src/arm/aspeed-g4.dtsi index 5d7050d008..dd4b0b15af 100644 --- a/dts/src/arm/aspeed-g4.dtsi +++ b/dts/src/arm/aspeed-g4.dtsi @@ -53,7 +53,7 @@ #size-cells = <1>; ranges; - fmc: flash-controller@1e620000 { + fmc: spi@1e620000 { reg = < 0x1e620000 0x94 0x20000000 0x10000000 >; #address-cells = <1>; @@ -69,7 +69,7 @@ }; }; - spi: flash-controller@1e630000 { + spi: spi@1e630000 { reg = < 0x1e630000 0x18 0x30000000 0x10000000 >; #address-cells = <1>; @@ -165,6 +165,10 @@ compatible = "aspeed,g4-pinctrl"; }; + p2a: p2a-control { + compatible = "aspeed,ast2400-p2a-ctrl"; + status = "disabled"; + }; }; rng: hwrng@1e6e2078 { diff --git a/dts/src/arm/aspeed-g5.dtsi b/dts/src/arm/aspeed-g5.dtsi index 4345c3153c..5b1ca265c2 100644 --- a/dts/src/arm/aspeed-g5.dtsi +++ b/dts/src/arm/aspeed-g5.dtsi @@ -60,7 +60,7 @@ #size-cells = <1>; ranges; - fmc: flash-controller@1e620000 { + fmc: spi@1e620000 { reg = < 0x1e620000 0xc4 0x20000000 0x10000000 >; #address-cells = <1>; @@ -86,7 +86,7 @@ }; }; - spi1: flash-controller@1e630000 { + spi1: spi@1e630000 { reg = < 0x1e630000 0xc4 0x30000000 0x08000000 >; #address-cells = <1>; @@ -106,7 +106,7 @@ }; }; - spi2: flash-controller@1e631000 { + spi2: spi@1e631000 { reg = < 0x1e631000 0xc4 0x38000000 0x08000000 >; #address-cells = <1>; @@ -219,6 +219,11 @@ aspeed,external-nodes = <&gfx &lhc>; }; + + p2a: p2a-control { + compatible = "aspeed,ast2500-p2a-ctrl"; + status = "disabled"; + }; }; rng: hwrng@1e6e2078 { diff --git a/dts/src/arm/at91-wb50n.dtsi b/dts/src/arm/at91-wb50n.dtsi index 85692c8ef2..4ed8500a5c 100644 --- a/dts/src/arm/at91-wb50n.dtsi +++ b/dts/src/arm/at91-wb50n.dtsi @@ -42,7 +42,7 @@ clock-frequency = <12000000>; }; -&slow_osc { +&clk32k { atmel,osc-bypass; }; diff --git a/dts/src/arm/at91sam9261ek.dts b/dts/src/arm/at91sam9261ek.dts index 1fa84d2f06..7debdeabcf 100644 --- a/dts/src/arm/at91sam9261ek.dts +++ b/dts/src/arm/at91sam9261ek.dts @@ -14,14 +14,6 @@ chosen { bootargs = "rootfstype=ubifs ubi.mtd=5 root=ubi0:rootfs rw"; stdout-path = "serial0:115200n8"; - - clocksource { - timer = <&timer0>; - }; - - clockevent { - timer = <&timer1>; - }; }; memory { diff --git a/dts/src/arm/at91sam9g45.dtsi b/dts/src/arm/at91sam9g45.dtsi index 9483609a21..691c95ea61 100644 --- a/dts/src/arm/at91sam9g45.dtsi +++ b/dts/src/arm/at91sam9g45.dtsi @@ -1258,30 +1258,11 @@ }; }; - sckc@fffffd50 { + clk32k: sckc@fffffd50 { compatible = "atmel,at91sam9x5-sckc"; reg = <0xfffffd50 0x4>; - - slow_osc: slow_osc { - compatible = "atmel,at91sam9x5-clk-slow-osc"; - #clock-cells = <0>; - atmel,startup-time-usec = <1200000>; - clocks = <&slow_xtal>; - }; - - slow_rc_osc: slow_rc_osc { - compatible = "atmel,at91sam9x5-clk-slow-rc-osc"; - #clock-cells = <0>; - atmel,startup-time-usec = <75>; - clock-frequency = <32768>; - clock-accuracy = <50000000>; - }; - - clk32k: slck { - compatible = "atmel,at91sam9x5-clk-slow"; - #clock-cells = <0>; - clocks = <&slow_rc_osc &slow_osc>; - }; + clocks = <&slow_xtal>; + #clock-cells = <0>; }; rtc@fffffd20 { diff --git a/dts/src/arm/at91sam9rl.dtsi b/dts/src/arm/at91sam9rl.dtsi index e2d38ce434..8643b71515 100644 --- a/dts/src/arm/at91sam9rl.dtsi +++ b/dts/src/arm/at91sam9rl.dtsi @@ -868,30 +868,11 @@ status = "disabled"; }; - sckc@fffffd50 { + clk32k: sckc@fffffd50 { compatible = "atmel,at91sam9x5-sckc"; reg = <0xfffffd50 0x4>; - - slow_osc: slow_osc { - compatible = "atmel,at91sam9x5-clk-slow-osc"; - #clock-cells = <0>; - atmel,startup-time-usec = <1200000>; - clocks = <&slow_xtal>; - }; - - slow_rc_osc: slow_rc_osc { - compatible = "atmel,at91sam9x5-clk-slow-rc-osc"; - #clock-cells = <0>; - atmel,startup-time-usec = <75>; - clock-frequency = <32768>; - clock-accuracy = <50000000>; - }; - - clk32k: slck { - compatible = "atmel,at91sam9x5-clk-slow"; - #clock-cells = <0>; - clocks = <&slow_rc_osc &slow_osc>; - }; + clocks = <&slow_xtal>; + #clock-cells = <0>; }; rtc@fffffd20 { diff --git a/dts/src/arm/at91sam9x5.dtsi b/dts/src/arm/at91sam9x5.dtsi index 9b7ce6bb1d..ef47c005ef 100644 --- a/dts/src/arm/at91sam9x5.dtsi +++ b/dts/src/arm/at91sam9x5.dtsi @@ -149,28 +149,11 @@ clocks = <&pmc PMC_TYPE_CORE PMC_MCK>; }; - sckc@fffffe50 { + clk32k: sckc@fffffe50 { compatible = "atmel,at91sam9x5-sckc"; reg = <0xfffffe50 0x4>; - - slow_osc: slow_osc { - compatible = "atmel,at91sam9x5-clk-slow-osc"; - #clock-cells = <0>; - clocks = <&slow_xtal>; - }; - - slow_rc_osc: slow_rc_osc { - compatible = "atmel,at91sam9x5-clk-slow-rc-osc"; - #clock-cells = <0>; - clock-frequency = <32768>; - clock-accuracy = <50000000>; - }; - - clk32k: slck { - compatible = "atmel,at91sam9x5-clk-slow"; - #clock-cells = <0>; - clocks = <&slow_rc_osc>, <&slow_osc>; - }; + clocks = <&slow_xtal>; + #clock-cells = <0>; }; tcb0: timer@f8008000 { diff --git a/dts/src/arm/bcm-cygnus-clock.dtsi b/dts/src/arm/bcm-cygnus-clock.dtsi index 80b6ba4ca5..52f91a12a9 100644 --- a/dts/src/arm/bcm-cygnus-clock.dtsi +++ b/dts/src/arm/bcm-cygnus-clock.dtsi @@ -42,7 +42,7 @@ clocks { }; /* Cygnus ARM PLL */ - armpll: armpll { + armpll: armpll@19000000 { #clock-cells = <0>; compatible = "brcm,cygnus-armpll"; clocks = <&osc>; @@ -67,7 +67,7 @@ clocks { clock-mult = <1>; }; - genpll: genpll { + genpll: genpll@301d000 { #clock-cells = <1>; compatible = "brcm,cygnus-genpll"; reg = <0x0301d000 0x2c>, <0x0301c020 0x4>; @@ -94,7 +94,7 @@ clocks { clock-mult = <1>; }; - lcpll0: lcpll0 { + lcpll0: lcpll0@301d02c { #clock-cells = <1>; compatible = "brcm,cygnus-lcpll0"; reg = <0x0301d02c 0x1c>, <0x0301c020 0x4>; @@ -103,7 +103,7 @@ clocks { "usb_phy", "smart_card", "ch5"; }; - mipipll: mipipll { + mipipll: mipipll@180a9800 { #clock-cells = <1>; compatible = "brcm,cygnus-mipipll"; reg = <0x180a9800 0x2c>, <0x0301c020 0x4>, <0x180aa024 0x4>; @@ -113,7 +113,7 @@ clocks { "ch5_unused"; }; - asiu_clks: asiu_clks { + asiu_clks: asiu_clks@301d048 { #clock-cells = <1>; compatible = "brcm,cygnus-asiu-clk"; reg = <0x0301d048 0xc>, <0x180aa024 0x4>; @@ -122,7 +122,7 @@ clocks { clock-output-names = "keypad", "adc/touch", "pwm"; }; - audiopll: audiopll { + audiopll: audiopll@180aeb00 { #clock-cells = <1>; compatible = "brcm,cygnus-audiopll"; reg = <0x180aeb00 0x68>; diff --git a/dts/src/arm/bcm-cygnus.dtsi b/dts/src/arm/bcm-cygnus.dtsi index 5f7b46503a..2dac3efc76 100644 --- a/dts/src/arm/bcm-cygnus.dtsi +++ b/dts/src/arm/bcm-cygnus.dtsi @@ -45,7 +45,7 @@ ethernet0 = ð0; }; - memory { + memory@0 { device_type = "memory"; reg = <0 0>; }; @@ -69,7 +69,7 @@ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; }; - core { + core@19000000 { compatible = "simple-bus"; ranges = <0x00000000 0x19000000 0x1000000>; #address-cells = <1>; @@ -91,7 +91,7 @@ <0x20100 0x100>; }; - L2: l2-cache { + L2: l2-cache@22000 { compatible = "arm,pl310-cache"; reg = <0x22000 0x1000>; cache-unified; diff --git a/dts/src/arm/bcm-nsp.dtsi b/dts/src/arm/bcm-nsp.dtsi index 6925b30c22..da6d70f09e 100644 --- a/dts/src/arm/bcm-nsp.dtsi +++ b/dts/src/arm/bcm-nsp.dtsi @@ -77,7 +77,7 @@ interrupt-affinity = <&cpu0>, <&cpu1>; }; - mpcore { + mpcore@19000000 { compatible = "simple-bus"; ranges = <0x00000000 0x19000000 0x00023000>; #address-cells = <1>; @@ -122,7 +122,7 @@ <0x20100 0x100>; }; - L2: l2-cache { + L2: l2-cache@22000 { compatible = "arm,pl310-cache"; reg = <0x22000 0x1000>; cache-unified; @@ -166,7 +166,7 @@ }; }; - axi { + axi@18000000 { compatible = "simple-bus"; ranges = <0x00000000 0x18000000 0x0011c40c>; #address-cells = <1>; @@ -415,9 +415,6 @@ "imp_sleep_timer_p5", "imp_sleep_timer_p7", "imp_sleep_timer_p8"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; /* ports are defined in board DTS */ diff --git a/dts/src/arm/bcm11351.dtsi b/dts/src/arm/bcm11351.dtsi index b99c2e5796..6197e7d80e 100644 --- a/dts/src/arm/bcm11351.dtsi +++ b/dts/src/arm/bcm11351.dtsi @@ -100,7 +100,7 @@ reg-io-width = <4>; }; - L2: l2-cache { + L2: l2-cache@3ff20000 { compatible = "brcm,bcm11351-a2-pl310-cache"; reg = <0x3ff20000 0x1000>; cache-unified; @@ -225,21 +225,21 @@ #size-cells = <1>; ranges; - root_ccu: root_ccu { + root_ccu: root_ccu@35001000 { compatible = "brcm,bcm11351-root-ccu"; reg = <0x35001000 0x0f00>; #clock-cells = <1>; clock-output-names = "frac_1m"; }; - hub_ccu: hub_ccu { + hub_ccu: hub_ccu@34000000 { compatible = "brcm,bcm11351-hub-ccu"; reg = <0x34000000 0x0f00>; #clock-cells = <1>; clock-output-names = "tmon_1m"; }; - aon_ccu: aon_ccu { + aon_ccu: aon_ccu@35002000 { compatible = "brcm,bcm11351-aon-ccu"; reg = <0x35002000 0x0f00>; #clock-cells = <1>; @@ -248,7 +248,7 @@ "pmu_bsc_var"; }; - master_ccu: master_ccu { + master_ccu: master_ccu@3f001000 { compatible = "brcm,bcm11351-master-ccu"; reg = <0x3f001000 0x0f00>; #clock-cells = <1>; @@ -261,7 +261,7 @@ "hsic2_12m"; }; - slave_ccu: slave_ccu { + slave_ccu: slave_ccu@3e011000 { compatible = "brcm,bcm11351-slave-ccu"; reg = <0x3e011000 0x0f00>; #clock-cells = <1>; diff --git a/dts/src/arm/bcm21664-garnet.dts b/dts/src/arm/bcm21664-garnet.dts index 8b045cfab6..be468f4adc 100644 --- a/dts/src/arm/bcm21664-garnet.dts +++ b/dts/src/arm/bcm21664-garnet.dts @@ -21,7 +21,7 @@ model = "BCM21664 Garnet board"; compatible = "brcm,bcm21664-garnet", "brcm,bcm21664"; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x40000000>; /* 1 GB */ }; diff --git a/dts/src/arm/bcm21664.dtsi b/dts/src/arm/bcm21664.dtsi index 758daa3341..3cf66faf3b 100644 --- a/dts/src/arm/bcm21664.dtsi +++ b/dts/src/arm/bcm21664.dtsi @@ -90,7 +90,7 @@ reg-io-width = <4>; }; - L2: l2-cache { + L2: l2-cache@3ff20000 { compatible = "arm,pl310-cache"; reg = <0x3ff20000 0x1000>; cache-unified; @@ -295,21 +295,21 @@ clock-frequency = <156000000>; }; - root_ccu: root_ccu { + root_ccu: root_ccu@35001000 { compatible = BCM21664_DT_ROOT_CCU_COMPAT; reg = <0x35001000 0x0f00>; #clock-cells = <1>; clock-output-names = "frac_1m"; }; - aon_ccu: aon_ccu { + aon_ccu: aon_ccu@35002000 { compatible = BCM21664_DT_AON_CCU_COMPAT; reg = <0x35002000 0x0f00>; #clock-cells = <1>; clock-output-names = "hub_timer"; }; - master_ccu: master_ccu { + master_ccu: master_ccu@3f001000 { compatible = BCM21664_DT_MASTER_CCU_COMPAT; reg = <0x3f001000 0x0f00>; #clock-cells = <1>; @@ -323,7 +323,7 @@ "sdio4_sleep"; }; - slave_ccu: slave_ccu { + slave_ccu: slave_ccu@3e011000 { compatible = BCM21664_DT_SLAVE_CCU_COMPAT; reg = <0x3e011000 0x0f00>; #clock-cells = <1>; diff --git a/dts/src/arm/bcm23550-sparrow.dts b/dts/src/arm/bcm23550-sparrow.dts index 1c66b15f30..ace77709f4 100644 --- a/dts/src/arm/bcm23550-sparrow.dts +++ b/dts/src/arm/bcm23550-sparrow.dts @@ -45,7 +45,7 @@ bootargs = "console=ttyS0,115200n8"; }; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x20000000>; /* 512 MB */ }; diff --git a/dts/src/arm/bcm23550.dtsi b/dts/src/arm/bcm23550.dtsi index 701198f5f4..a36c9b1d23 100644 --- a/dts/src/arm/bcm23550.dtsi +++ b/dts/src/arm/bcm23550.dtsi @@ -371,21 +371,21 @@ clock-frequency = <156000000>; }; - root_ccu: root_ccu { + root_ccu: root_ccu@35001000 { compatible = BCM21664_DT_ROOT_CCU_COMPAT; reg = <0x35001000 0x0f00>; #clock-cells = <1>; clock-output-names = "frac_1m"; }; - aon_ccu: aon_ccu { + aon_ccu: aon_ccu@35002000 { compatible = BCM21664_DT_AON_CCU_COMPAT; reg = <0x35002000 0x0f00>; #clock-cells = <1>; clock-output-names = "hub_timer"; }; - slave_ccu: slave_ccu { + slave_ccu: slave_ccu@3e011000 { compatible = BCM21664_DT_SLAVE_CCU_COMPAT; reg = <0x3e011000 0x0f00>; #clock-cells = <1>; @@ -398,7 +398,7 @@ "bsc4"; }; - master_ccu: master_ccu { + master_ccu: master_ccu@3f001000 { compatible = BCM21664_DT_MASTER_CCU_COMPAT; reg = <0x3f001000 0x0f00>; #clock-cells = <1>; diff --git a/dts/src/arm/bcm28155-ap.dts b/dts/src/arm/bcm28155-ap.dts index fbfca83bd2..ead6e9804d 100644 --- a/dts/src/arm/bcm28155-ap.dts +++ b/dts/src/arm/bcm28155-ap.dts @@ -21,7 +21,7 @@ model = "BCM28155 AP board"; compatible = "brcm,bcm28155-ap", "brcm,bcm11351"; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x40000000>; /* 1 GB */ }; diff --git a/dts/src/arm/bcm283x.dtsi b/dts/src/arm/bcm283x.dtsi index 9777644c6c..4b21ddb26a 100644 --- a/dts/src/arm/bcm283x.dtsi +++ b/dts/src/arm/bcm283x.dtsi @@ -431,6 +431,8 @@ reg = <0x7e204000 0x1000>; interrupts = <2 22>; clocks = <&clocks BCM2835_CLOCK_VPU>; + dmas = <&dma 6>, <&dma 7>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; diff --git a/dts/src/arm/bcm4708-asus-rt-ac56u.dts b/dts/src/arm/bcm4708-asus-rt-ac56u.dts index 1c6f561ac5..6a96655d86 100644 --- a/dts/src/arm/bcm4708-asus-rt-ac56u.dts +++ b/dts/src/arm/bcm4708-asus-rt-ac56u.dts @@ -19,7 +19,7 @@ bootargs = "console=ttyS0,115200"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000 0x88000000 0x08000000>; @@ -69,8 +69,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; rfkill { label = "WiFi"; diff --git a/dts/src/arm/bcm4708-asus-rt-ac68u.dts b/dts/src/arm/bcm4708-asus-rt-ac68u.dts index e550799a6a..3b0029e61b 100644 --- a/dts/src/arm/bcm4708-asus-rt-ac68u.dts +++ b/dts/src/arm/bcm4708-asus-rt-ac68u.dts @@ -19,7 +19,7 @@ bootargs = "console=ttyS0,115200"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000 0x88000000 0x08000000>; @@ -53,8 +53,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; brightness { label = "Backlight"; diff --git a/dts/src/arm/bcm4708-buffalo-wzr-1750dhp.dts b/dts/src/arm/bcm4708-buffalo-wzr-1750dhp.dts index 7bfa2238f7..90f57bad6b 100644 --- a/dts/src/arm/bcm4708-buffalo-wzr-1750dhp.dts +++ b/dts/src/arm/bcm4708-buffalo-wzr-1750dhp.dts @@ -19,7 +19,7 @@ bootargs = "console=ttyS0,115200 earlycon"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000 0x88000000 0x18000000>; @@ -99,8 +99,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; restart { label = "Reset"; diff --git a/dts/src/arm/bcm4708-linksys-ea6300-v1.dts b/dts/src/arm/bcm4708-linksys-ea6300-v1.dts index fd361c9b13..41548d6d47 100644 --- a/dts/src/arm/bcm4708-linksys-ea6300-v1.dts +++ b/dts/src/arm/bcm4708-linksys-ea6300-v1.dts @@ -16,15 +16,13 @@ bootargs = "console=ttyS0,115200"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000>; }; gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; wps { label = "WPS"; diff --git a/dts/src/arm/bcm4708-linksys-ea6500-v2.dts b/dts/src/arm/bcm4708-linksys-ea6500-v2.dts index 7c34360d32..cd797b4202 100644 --- a/dts/src/arm/bcm4708-linksys-ea6500-v2.dts +++ b/dts/src/arm/bcm4708-linksys-ea6500-v2.dts @@ -17,15 +17,13 @@ bootargs = "console=ttyS0,115200"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000>; }; gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; wps { label = "WPS"; diff --git a/dts/src/arm/bcm4708-luxul-xap-1510.dts b/dts/src/arm/bcm4708-luxul-xap-1510.dts index 969b8d78e4..e58c8077be 100644 --- a/dts/src/arm/bcm4708-luxul-xap-1510.dts +++ b/dts/src/arm/bcm4708-luxul-xap-1510.dts @@ -15,7 +15,7 @@ bootargs = "console=ttyS0,115200 earlycon"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000>; }; @@ -44,8 +44,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; restart { label = "Reset"; diff --git a/dts/src/arm/bcm4708-luxul-xwc-1000.dts b/dts/src/arm/bcm4708-luxul-xwc-1000.dts index b62854ee27..766db61745 100644 --- a/dts/src/arm/bcm4708-luxul-xwc-1000.dts +++ b/dts/src/arm/bcm4708-luxul-xwc-1000.dts @@ -19,7 +19,7 @@ bootargs = "console=ttyS0,115200 earlycon"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000>; }; @@ -51,8 +51,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; restart { label = "Reset"; diff --git a/dts/src/arm/bcm4708-netgear-r6250.dts b/dts/src/arm/bcm4708-netgear-r6250.dts index 75f7b4ef35..fed75e6ab5 100644 --- a/dts/src/arm/bcm4708-netgear-r6250.dts +++ b/dts/src/arm/bcm4708-netgear-r6250.dts @@ -62,8 +62,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; wps { label = "WPS"; diff --git a/dts/src/arm/bcm4708-netgear-r6300-v2.dts b/dts/src/arm/bcm4708-netgear-r6300-v2.dts index 148d16a908..79542e1891 100644 --- a/dts/src/arm/bcm4708-netgear-r6300-v2.dts +++ b/dts/src/arm/bcm4708-netgear-r6300-v2.dts @@ -19,7 +19,7 @@ bootargs = "console=ttyS0,115200"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000 0x88000000 0x08000000>; @@ -58,8 +58,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; wps { label = "WPS"; diff --git a/dts/src/arm/bcm4708-smartrg-sr400ac.dts b/dts/src/arm/bcm4708-smartrg-sr400ac.dts index eed3aab667..abd35a5180 100644 --- a/dts/src/arm/bcm4708-smartrg-sr400ac.dts +++ b/dts/src/arm/bcm4708-smartrg-sr400ac.dts @@ -19,7 +19,7 @@ bootargs = "console=ttyS0,115200 earlycon"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000 0x88000000 0x08000000>; @@ -93,8 +93,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; rfkill { label = "WiFi"; diff --git a/dts/src/arm/bcm47081-asus-rt-n18u.dts b/dts/src/arm/bcm47081-asus-rt-n18u.dts index fe842f2f1c..c29950b43a 100644 --- a/dts/src/arm/bcm47081-asus-rt-n18u.dts +++ b/dts/src/arm/bcm47081-asus-rt-n18u.dts @@ -19,7 +19,7 @@ bootargs = "console=ttyS0,115200"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000 0x88000000 0x08000000>; @@ -59,8 +59,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; restart { label = "Reset"; diff --git a/dts/src/arm/bcm47081-buffalo-wzr-600dhp2.dts b/dts/src/arm/bcm47081-buffalo-wzr-600dhp2.dts index 6fcbb0509b..4dcec68654 100644 --- a/dts/src/arm/bcm47081-buffalo-wzr-600dhp2.dts +++ b/dts/src/arm/bcm47081-buffalo-wzr-600dhp2.dts @@ -19,7 +19,7 @@ bootargs = "console=ttyS0,115200 earlycon"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000 0x88000000 0x08000000>; @@ -90,8 +90,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; aoss { label = "AOSS"; diff --git a/dts/src/arm/bcm47081-buffalo-wzr-900dhp.dts b/dts/src/arm/bcm47081-buffalo-wzr-900dhp.dts index b3e8cc90b1..0e349e39f6 100644 --- a/dts/src/arm/bcm47081-buffalo-wzr-900dhp.dts +++ b/dts/src/arm/bcm47081-buffalo-wzr-900dhp.dts @@ -19,7 +19,7 @@ bootargs = "console=ttyS0,115200"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000 0x88000000 0x08000000>; @@ -95,8 +95,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; restart { label = "Reset"; diff --git a/dts/src/arm/bcm47081-luxul-xap-1410.dts b/dts/src/arm/bcm47081-luxul-xap-1410.dts index fdeaa89551..b9d9501163 100644 --- a/dts/src/arm/bcm47081-luxul-xap-1410.dts +++ b/dts/src/arm/bcm47081-luxul-xap-1410.dts @@ -15,7 +15,7 @@ bootargs = "console=ttyS0,115200"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000>; }; @@ -44,8 +44,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; restart { label = "Reset"; diff --git a/dts/src/arm/bcm47081-luxul-xwr-1200.dts b/dts/src/arm/bcm47081-luxul-xwr-1200.dts index 0d510cb15e..0052e1b241 100644 --- a/dts/src/arm/bcm47081-luxul-xwr-1200.dts +++ b/dts/src/arm/bcm47081-luxul-xwr-1200.dts @@ -16,7 +16,7 @@ bootargs = "console=ttyS0,115200"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000>; }; @@ -88,8 +88,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; restart { label = "Reset"; diff --git a/dts/src/arm/bcm47081-tplink-archer-c5-v2.dts b/dts/src/arm/bcm47081-tplink-archer-c5-v2.dts index 962e89edba..01c390ed48 100644 --- a/dts/src/arm/bcm47081-tplink-archer-c5-v2.dts +++ b/dts/src/arm/bcm47081-tplink-archer-c5-v2.dts @@ -15,7 +15,7 @@ bootargs = "earlycon"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000>; }; @@ -76,8 +76,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; rfkill { label = "WiFi"; diff --git a/dts/src/arm/bcm47094-dlink-dir-885l.dts b/dts/src/arm/bcm47094-dlink-dir-885l.dts index 658a56ff8a..911c65fbf2 100644 --- a/dts/src/arm/bcm47094-dlink-dir-885l.dts +++ b/dts/src/arm/bcm47094-dlink-dir-885l.dts @@ -19,7 +19,7 @@ bootargs = "console=ttyS0,115200 earlycon"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000 0x88000000 0x08000000>; @@ -85,8 +85,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; wps { label = "WPS"; diff --git a/dts/src/arm/bcm47094-linksys-panamera.dts b/dts/src/arm/bcm47094-linksys-panamera.dts index 5fd47eec44..0faae89503 100644 --- a/dts/src/arm/bcm47094-linksys-panamera.dts +++ b/dts/src/arm/bcm47094-linksys-panamera.dts @@ -16,7 +16,7 @@ bootargs = "console=ttyS0,115200"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000 0x88000000 0x08000000>; @@ -24,8 +24,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; wps { label = "WPS"; @@ -126,6 +124,9 @@ }; mdio-bus-mux { + #address-cells = <1>; + #size-cells = <0>; + /* BIT(9) = 1 => external mdio */ mdio_ext: mdio@200 { reg = <0x200>; diff --git a/dts/src/arm/bcm47094-luxul-abr-4500.dts b/dts/src/arm/bcm47094-luxul-abr-4500.dts index 6604be6ff0..50f7cd08cf 100644 --- a/dts/src/arm/bcm47094-luxul-abr-4500.dts +++ b/dts/src/arm/bcm47094-luxul-abr-4500.dts @@ -16,7 +16,7 @@ bootargs = "earlycon"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000 0x88000000 0x18000000>; @@ -43,8 +43,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; restart { label = "Reset"; diff --git a/dts/src/arm/bcm47094-luxul-xap-1610.dts b/dts/src/arm/bcm47094-luxul-xap-1610.dts index 567ebbd5a0..b47fb0700a 100644 --- a/dts/src/arm/bcm47094-luxul-xap-1610.dts +++ b/dts/src/arm/bcm47094-luxul-xap-1610.dts @@ -15,7 +15,7 @@ bootargs = "earlycon"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000>; }; @@ -42,8 +42,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; restart { label = "Reset"; diff --git a/dts/src/arm/bcm47094-luxul-xbr-4500.dts b/dts/src/arm/bcm47094-luxul-xbr-4500.dts index ac2d136ed3..bcc420f85b 100644 --- a/dts/src/arm/bcm47094-luxul-xbr-4500.dts +++ b/dts/src/arm/bcm47094-luxul-xbr-4500.dts @@ -16,7 +16,7 @@ bootargs = "earlycon"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000 0x88000000 0x18000000>; @@ -43,8 +43,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; restart { label = "Reset"; diff --git a/dts/src/arm/bcm47094-luxul-xwr-3100.dts b/dts/src/arm/bcm47094-luxul-xwr-3100.dts index 74371e821b..ac75154234 100644 --- a/dts/src/arm/bcm47094-luxul-xwr-3100.dts +++ b/dts/src/arm/bcm47094-luxul-xwr-3100.dts @@ -16,7 +16,7 @@ bootargs = "console=ttyS0,115200 earlycon"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000 0x88000000 0x08000000>; @@ -83,8 +83,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; restart { label = "Reset"; diff --git a/dts/src/arm/bcm47094-luxul-xwr-3150-v1.dts b/dts/src/arm/bcm47094-luxul-xwr-3150-v1.dts index b44af63ee3..6d28b7dacd 100644 --- a/dts/src/arm/bcm47094-luxul-xwr-3150-v1.dts +++ b/dts/src/arm/bcm47094-luxul-xwr-3150-v1.dts @@ -16,7 +16,7 @@ bootargs = "earlycon"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000 0x88000000 0x18000000>; @@ -58,8 +58,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; restart { label = "Reset"; diff --git a/dts/src/arm/bcm47094-netgear-r8500.dts b/dts/src/arm/bcm47094-netgear-r8500.dts index eebc0d43e2..f42a1703f4 100644 --- a/dts/src/arm/bcm47094-netgear-r8500.dts +++ b/dts/src/arm/bcm47094-netgear-r8500.dts @@ -16,7 +16,7 @@ bootargs = "console=ttyS0,115200"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000 0x88000000 0x18000000>; @@ -64,8 +64,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; brightness { label = "Backlight"; diff --git a/dts/src/arm/bcm47094-phicomm-k3.dts b/dts/src/arm/bcm47094-phicomm-k3.dts index 456045f17a..ac3a4483dc 100644 --- a/dts/src/arm/bcm47094-phicomm-k3.dts +++ b/dts/src/arm/bcm47094-phicomm-k3.dts @@ -13,7 +13,7 @@ compatible = "phicomm,k3", "brcm,bcm47094", "brcm,bcm4708"; model = "Phicomm K3"; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000 0x88000000 0x18000000>; @@ -21,8 +21,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; restart { label = "Reset"; diff --git a/dts/src/arm/bcm47189-luxul-xap-1440.dts b/dts/src/arm/bcm47189-luxul-xap-1440.dts index eb59508578..57ca1cfaec 100644 --- a/dts/src/arm/bcm47189-luxul-xap-1440.dts +++ b/dts/src/arm/bcm47189-luxul-xap-1440.dts @@ -15,7 +15,7 @@ bootargs = "earlycon"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000>; }; @@ -38,8 +38,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; restart { label = "Reset"; diff --git a/dts/src/arm/bcm47189-luxul-xap-810.dts b/dts/src/arm/bcm47189-luxul-xap-810.dts index 4c71f5e95e..2e1a7e382c 100644 --- a/dts/src/arm/bcm47189-luxul-xap-810.dts +++ b/dts/src/arm/bcm47189-luxul-xap-810.dts @@ -15,7 +15,7 @@ bootargs = "earlycon"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000>; }; @@ -48,8 +48,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; restart { label = "Reset"; diff --git a/dts/src/arm/bcm47189-tenda-ac9.dts b/dts/src/arm/bcm47189-tenda-ac9.dts index 5ad53ea52d..049cdfd927 100644 --- a/dts/src/arm/bcm47189-tenda-ac9.dts +++ b/dts/src/arm/bcm47189-tenda-ac9.dts @@ -15,7 +15,7 @@ bootargs = "console=ttyS0,115200 earlycon"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000>; }; @@ -58,8 +58,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; rfkill { label = "WiFi"; diff --git a/dts/src/arm/bcm5301x.dtsi b/dts/src/arm/bcm5301x.dtsi index ac5266ee8d..372dc1eb88 100644 --- a/dts/src/arm/bcm5301x.dtsi +++ b/dts/src/arm/bcm5301x.dtsi @@ -19,7 +19,7 @@ #size-cells = <1>; interrupt-parent = <&gic>; - chipcommonA { + chipcommonA@18000000 { compatible = "simple-bus"; ranges = <0x00000000 0x18000000 0x00001000>; #address-cells = <1>; @@ -44,7 +44,7 @@ }; }; - mpcore { + mpcore@19000000 { compatible = "simple-bus"; ranges = <0x00000000 0x19000000 0x00023000>; #address-cells = <1>; @@ -148,7 +148,7 @@ }; }; - usb2_phy: usb2-phy { + usb2_phy: usb2-phy@1800c000 { compatible = "brcm,ns-usb2-phy"; reg = <0x1800c000 0x1000>; reg-names = "dmu"; @@ -357,7 +357,7 @@ #address-cells = <0>; }; - mdio-bus-mux { + mdio-bus-mux@18003000 { compatible = "mdio-mux-mmioreg"; mdio-parent-bus = <&mdio>; #address-cells = <1>; @@ -464,8 +464,6 @@ srab: srab@18007000 { compatible = "brcm,bcm5301x-srab"; reg = <0x18007000 0x1000>; - #address-cells = <1>; - #size-cells = <0>; status = "disabled"; diff --git a/dts/src/arm/bcm53573.dtsi b/dts/src/arm/bcm53573.dtsi index b29695bd48..4af8e3293c 100644 --- a/dts/src/arm/bcm53573.dtsi +++ b/dts/src/arm/bcm53573.dtsi @@ -32,7 +32,7 @@ }; }; - mpcore { + mpcore@18310000 { compatible = "simple-bus"; ranges = <0x00000000 0x18310000 0x00008000>; #address-cells = <1>; diff --git a/dts/src/arm/bcm63138.dtsi b/dts/src/arm/bcm63138.dtsi index e6a41e1b27..9c0325cf9e 100644 --- a/dts/src/arm/bcm63138.dtsi +++ b/dts/src/arm/bcm63138.dtsi @@ -41,9 +41,6 @@ }; clocks { - #address-cells = <1>; - #size-cells = <0>; - /* UBUS peripheral clock */ periph_clk: periph_clk { #clock-cells = <0>; @@ -94,7 +91,7 @@ reg = <0x1e000 0x100>; }; - gic: interrupt-controller@1e100 { + gic: interrupt-controller@1f000 { compatible = "arm,cortex-a9-gic"; reg = <0x1f000 0x1000 0x1e100 0x100>; @@ -125,7 +122,7 @@ IRQ_TYPE_LEVEL_HIGH)>; }; - armpll: armpll { + armpll: armpll@20000 { #clock-cells = <0>; compatible = "brcm,bcm63138-armpll"; clocks = <&periph_clk>; @@ -144,7 +141,7 @@ #reset-cells = <2>; }; - ahci: sata@8000 { + ahci: sata@a000 { compatible = "brcm,bcm63138-ahci", "brcm,sata3-ahci"; reg-names = "ahci", "top-ctrl"; reg = <0xa000 0x9ac>, <0x8040 0x24>; diff --git a/dts/src/arm/bcm7445-bcm97445svmb.dts b/dts/src/arm/bcm7445-bcm97445svmb.dts index 8006c69a3f..8313b7cad5 100644 --- a/dts/src/arm/bcm7445-bcm97445svmb.dts +++ b/dts/src/arm/bcm7445-bcm97445svmb.dts @@ -6,7 +6,7 @@ model = "Broadcom STB (bcm7445), SVMB reference board"; compatible = "brcm,bcm7445", "brcm,brcmstb"; - memory { + memory@0 { device_type = "memory"; reg = <0x00 0x00000000 0x00 0x40000000>, <0x00 0x40000000 0x00 0x40000000>, diff --git a/dts/src/arm/bcm7445.dtsi b/dts/src/arm/bcm7445.dtsi index 504a63236a..58f67c9b83 100644 --- a/dts/src/arm/bcm7445.dtsi +++ b/dts/src/arm/bcm7445.dtsi @@ -63,7 +63,7 @@ <GIC_PPI 10 (GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>; }; - rdb { + rdb@f0000000 { #address-cells = <1>; #size-cells = <1>; compatible = "simple-bus"; @@ -224,7 +224,7 @@ }; - memory_controllers { + memory_controllers@f1100000 { compatible = "simple-bus"; ranges = <0x0 0x0 0xf1100000 0x200000>; #address-cells = <1>; @@ -252,7 +252,7 @@ }; }; - memc@1 { + memc@80000 { compatible = "brcm,brcmstb-memc", "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -274,7 +274,7 @@ }; }; - memc@2 { + memc@100000 { compatible = "brcm,brcmstb-memc", "simple-bus"; #address-cells = <1>; #size-cells = <1>; diff --git a/dts/src/arm/bcm911360_entphn.dts b/dts/src/arm/bcm911360_entphn.dts index 53f990defd..b2d323f4a5 100644 --- a/dts/src/arm/bcm911360_entphn.dts +++ b/dts/src/arm/bcm911360_entphn.dts @@ -49,8 +49,6 @@ gpio_keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; hook { label = "HOOK"; diff --git a/dts/src/arm/bcm947189acdbmr.dts b/dts/src/arm/bcm947189acdbmr.dts index 4991700ae6..b0b8c774a3 100644 --- a/dts/src/arm/bcm947189acdbmr.dts +++ b/dts/src/arm/bcm947189acdbmr.dts @@ -17,7 +17,7 @@ bootargs = "console=ttyS0,115200 earlycon"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000>; }; @@ -43,8 +43,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; restart { label = "Reset"; diff --git a/dts/src/arm/bcm953012er.dts b/dts/src/arm/bcm953012er.dts index 250a1d6f2d..9574682246 100644 --- a/dts/src/arm/bcm953012er.dts +++ b/dts/src/arm/bcm953012er.dts @@ -39,15 +39,13 @@ model = "NorthStar Enterprise Router (BCM953012ER)"; compatible = "brcm,bcm953012er", "brcm,brcm53012", "brcm,bcm4708"; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x8000000>; }; gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; wps { label = "WPS"; diff --git a/dts/src/arm/bcm953012k.dts b/dts/src/arm/bcm953012k.dts index 52c4c6c9d3..046c59fb48 100644 --- a/dts/src/arm/bcm953012k.dts +++ b/dts/src/arm/bcm953012k.dts @@ -43,7 +43,7 @@ serial1 = &uart1; }; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x10000000>; }; diff --git a/dts/src/arm/bcm958522er.dts b/dts/src/arm/bcm958522er.dts index 21479b4ce8..8c388eb8a0 100644 --- a/dts/src/arm/bcm958522er.dts +++ b/dts/src/arm/bcm958522er.dts @@ -43,7 +43,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@60000000 { device_type = "memory"; reg = <0x60000000 0x80000000>; }; diff --git a/dts/src/arm/bcm958525er.dts b/dts/src/arm/bcm958525er.dts index cda3d79096..c339771bb2 100644 --- a/dts/src/arm/bcm958525er.dts +++ b/dts/src/arm/bcm958525er.dts @@ -43,7 +43,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@60000000 { device_type = "memory"; reg = <0x60000000 0x80000000>; }; diff --git a/dts/src/arm/bcm958525xmc.dts b/dts/src/arm/bcm958525xmc.dts index f86649812b..1c72ec8288 100644 --- a/dts/src/arm/bcm958525xmc.dts +++ b/dts/src/arm/bcm958525xmc.dts @@ -43,7 +43,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@60000000 { device_type = "memory"; reg = <0x60000000 0x40000000>; }; diff --git a/dts/src/arm/bcm958622hr.dts b/dts/src/arm/bcm958622hr.dts index df60602b05..96a021cebd 100644 --- a/dts/src/arm/bcm958622hr.dts +++ b/dts/src/arm/bcm958622hr.dts @@ -43,7 +43,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@60000000 { device_type = "memory"; reg = <0x60000000 0x80000000>; }; diff --git a/dts/src/arm/bcm958623hr.dts b/dts/src/arm/bcm958623hr.dts index 3893e7af34..b2c7f21d47 100644 --- a/dts/src/arm/bcm958623hr.dts +++ b/dts/src/arm/bcm958623hr.dts @@ -43,7 +43,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@60000000 { device_type = "memory"; reg = <0x60000000 0x80000000>; }; diff --git a/dts/src/arm/bcm958625hr.dts b/dts/src/arm/bcm958625hr.dts index cf226b0214..a2c9de35dd 100644 --- a/dts/src/arm/bcm958625hr.dts +++ b/dts/src/arm/bcm958625hr.dts @@ -43,7 +43,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@60000000 { device_type = "memory"; reg = <0x60000000 0x20000000>; }; diff --git a/dts/src/arm/bcm958625k.dts b/dts/src/arm/bcm958625k.dts index 10b3d512bb..3fcca12d83 100644 --- a/dts/src/arm/bcm958625k.dts +++ b/dts/src/arm/bcm958625k.dts @@ -42,7 +42,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@60000000 { device_type = "memory"; reg = <0x60000000 0x80000000>; }; diff --git a/dts/src/arm/bcm963138dvt.dts b/dts/src/arm/bcm963138dvt.dts index 29525686e5..5b177274f1 100644 --- a/dts/src/arm/bcm963138dvt.dts +++ b/dts/src/arm/bcm963138dvt.dts @@ -16,7 +16,7 @@ stdout-path = &serial0; }; - memory { + memory@0 { device_type = "memory"; reg = <0x0 0x08000000>; }; diff --git a/dts/src/arm/bcm988312hr.dts b/dts/src/arm/bcm988312hr.dts index e39db14d80..edd0f630e0 100644 --- a/dts/src/arm/bcm988312hr.dts +++ b/dts/src/arm/bcm988312hr.dts @@ -43,7 +43,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@60000000 { device_type = "memory"; reg = <0x60000000 0x80000000>; }; diff --git a/dts/src/arm/da850-evm.dts b/dts/src/arm/da850-evm.dts index f2d2b87233..5b2b1ed04d 100644 --- a/dts/src/arm/da850-evm.dts +++ b/dts/src/arm/da850-evm.dts @@ -188,6 +188,19 @@ }; }; +&cpu { + cpu-supply = <&vdcdc3_reg>; +}; + +/* + * The standard da850-evm kits and SOM's are 375MHz so enable this operating + * point by default. Higher frequencies must be enabled for custom boards with + * other variants of the SoC. + */ +&opp_375 { + status = "okay"; +}; + &sata { status = "okay"; }; diff --git a/dts/src/arm/da850-lcdk.dts b/dts/src/arm/da850-lcdk.dts index 2fd2a6838d..e379d6e7ad 100644 --- a/dts/src/arm/da850-lcdk.dts +++ b/dts/src/arm/da850-lcdk.dts @@ -154,12 +154,48 @@ }; }; }; + + cvdd: regulator0 { + compatible = "regulator-fixed"; + regulator-name = "cvdd"; + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + }; }; &ref_clk { clock-frequency = <24000000>; }; +&cpu { + cpu-supply = <&cvdd>; +}; + +/* + * LCDK has a fixed CVDD of 1.3V, so only operating points >= 300MHz are + * valid. Unfortunately due to a problem with the DA8XX OHCI controller, we + * can't enable more than one OPP by default, since the controller sometimes + * becomes unresponsive after a transition. Fix the frequency at 456 MHz. + */ + +&opp_100 { + status = "disabled"; +}; + +&opp_200 { + status = "disabled"; +}; + +&opp_300 { + status = "disabled"; +}; + +&opp_456 { + status = "okay"; +}; + &pmx_core { status = "okay"; diff --git a/dts/src/arm/da850-lego-ev3.dts b/dts/src/arm/da850-lego-ev3.dts index 09c3666def..afd04a4238 100644 --- a/dts/src/arm/da850-lego-ev3.dts +++ b/dts/src/arm/da850-lego-ev3.dts @@ -122,6 +122,15 @@ amp-supply = <&>; }; + cvdd: regulator0 { + compatible = "regulator-fixed"; + regulator-name = "cvdd"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + }; + /* * This is a 5V current limiting regulator that is shared by USB, * the sensor (input) ports, the motor (output) ports and the A/DC. @@ -201,6 +210,27 @@ clock-frequency = <24000000>; }; +&cpu { + cpu-supply = <&cvdd>; +}; + +/* since we have a fixed regulator, we can't run at these points */ +&opp_100 { + status = "disabled"; +}; + +&opp_200 { + status = "disabled"; +}; + +/* + * The SoC is actually the 456MHz version, but because of the fixed regulator + * This is the fastest we can go. + */ +&opp_375 { + status = "okay"; +}; + &pmx_core { status = "okay"; diff --git a/dts/src/arm/da850.dtsi b/dts/src/arm/da850.dtsi index e6e78b88ca..7cf31b6e48 100644 --- a/dts/src/arm/da850.dtsi +++ b/dts/src/arm/da850.dtsi @@ -16,6 +16,56 @@ reg = <0xc0000000 0x0>; }; + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu: cpu@0 { + compatible = "arm,arm926ej-s"; + device_type = "cpu"; + reg = <0>; + clocks = <&psc0 14>; + operating-points-v2 = <&opp_table>; + }; + }; + + opp_table: opp-table { + compatible = "operating-points-v2"; + + opp_100: opp100-100000000 { + opp-hz = /bits/ 64 <100000000>; + opp-microvolt = <1000000 950000 1050000>; + }; + + opp_200: opp110-200000000 { + opp-hz = /bits/ 64 <200000000>; + opp-microvolt = <1100000 1050000 1160000>; + }; + + opp_300: opp120-300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-microvolt = <1200000 1140000 1320000>; + }; + + /* + * Original silicon was 300MHz max, so higher frequencies + * need to be enabled on a per-board basis if the chip is + * capable. + */ + + opp_375: opp120-375000000 { + status = "disabled"; + opp-hz = /bits/ 64 <375000000>; + opp-microvolt = <1200000 1140000 1320000>; + }; + + opp_456: opp130-456000000 { + status = "disabled"; + opp-hz = /bits/ 64 <456000000>; + opp-microvolt = <1300000 1250000 1350000>; + }; + }; + arm { #address-cells = <1>; #size-cells = <1>; diff --git a/dts/src/arm/emev2-kzm9d.dts b/dts/src/arm/emev2-kzm9d.dts index abfff54d6d..0a27f034dd 100644 --- a/dts/src/arm/emev2-kzm9d.dts +++ b/dts/src/arm/emev2-kzm9d.dts @@ -25,7 +25,7 @@ }; chosen { - bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; + bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; stdout-path = "serial1:115200n8"; }; diff --git a/dts/src/arm/exynos3250-artik5.dtsi b/dts/src/arm/exynos3250-artik5.dtsi index ace50e194a..dee35e3a5c 100644 --- a/dts/src/arm/exynos3250-artik5.dtsi +++ b/dts/src/arm/exynos3250-artik5.dtsi @@ -59,6 +59,11 @@ cpu0-supply = <&buck2_reg>; }; +&gpu { + mali-supply = <&buck3_reg>; + status = "okay"; +}; + &i2c_0 { #address-cells = <1>; #size-cells = <0>; diff --git a/dts/src/arm/exynos3250-monk.dts b/dts/src/arm/exynos3250-monk.dts index e25765500e..248bd372fe 100644 --- a/dts/src/arm/exynos3250-monk.dts +++ b/dts/src/arm/exynos3250-monk.dts @@ -172,6 +172,11 @@ status = "okay"; }; +&gpu { + mali-supply = <&buck3_reg>; + status = "okay"; +}; + &hsotg { vusb_d-supply = <&ldo15_reg>; vusb_a-supply = <&ldo12_reg>; diff --git a/dts/src/arm/exynos3250-rinato.dts b/dts/src/arm/exynos3250-rinato.dts index 7479993755..86c26a4edf 100644 --- a/dts/src/arm/exynos3250-rinato.dts +++ b/dts/src/arm/exynos3250-rinato.dts @@ -244,6 +244,11 @@ }; }; +&gpu { + mali-supply = <&buck3_reg>; + status = "okay"; +}; + &i2c_0 { #address-cells = <1>; #size-cells = <0>; diff --git a/dts/src/arm/exynos3250.dtsi b/dts/src/arm/exynos3250.dtsi index 8ce3a7786b..5659c4a107 100644 --- a/dts/src/arm/exynos3250.dtsi +++ b/dts/src/arm/exynos3250.dtsi @@ -462,6 +462,39 @@ status = "disabled"; }; + gpu: gpu@13000000 { + compatible = "samsung,exynos4210-mali", "arm,mali-400"; + reg = <0x13000000 0x10000>; + interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "gp", + "gpmmu", + "pp0", + "ppmmu0", + "pp1", + "ppmmu1", + "pp2", + "ppmmu2", + "pp3", + "ppmmu3", + "pmu"; + clocks = <&cmu CLK_G3D>, + <&cmu CLK_SCLK_G3D>; + clock-names = "bus", "core"; + power-domains = <&pd_g3d>; + status = "disabled"; + /* TODO: operating points for DVFS, assigned clock as 134 MHz */ + }; + mfc: codec@13400000 { compatible = "samsung,mfc-v7"; reg = <0x13400000 0x10000>; diff --git a/dts/src/arm/exynos4.dtsi b/dts/src/arm/exynos4.dtsi index 36ccf22743..1264cc431f 100644 --- a/dts/src/arm/exynos4.dtsi +++ b/dts/src/arm/exynos4.dtsi @@ -54,7 +54,7 @@ pmu: pmu { compatible = "arm,cortex-a9-pmu"; interrupt-parent = <&combiner>; - interrupts = <2 2>, <3 2>; + status = "disabled"; }; soc: soc { @@ -415,6 +415,20 @@ }; }; + gpu: gpu@13000000 { + compatible = "samsung,exynos4210-mali", "arm,mali-400"; + reg = <0x13000000 0x10000>; + /* + * CLK_G3D is not actually bus clock but a IP-level clock. + * The bus clock is not described in hardware manual. + */ + clocks = <&clock CLK_G3D>, + <&clock CLK_SCLK_G3D>; + clock-names = "bus", "core"; + power-domains = <&pd_g3d>; + status = "disabled"; + }; + i2s1: i2s@13960000 { compatible = "samsung,s3c6410-i2s"; reg = <0x13960000 0x100>; diff --git a/dts/src/arm/exynos4210-origen.dts b/dts/src/arm/exynos4210-origen.dts index 36b1edea25..0d1e1a9c2f 100644 --- a/dts/src/arm/exynos4210-origen.dts +++ b/dts/src/arm/exynos4210-origen.dts @@ -132,6 +132,11 @@ status = "okay"; }; +&gpu { + mali-supply = <&buck3_reg>; + status = "okay"; +}; + &hsotg { vusb_d-supply = <&ldo3_reg>; vusb_a-supply = <&ldo8_reg>; diff --git a/dts/src/arm/exynos4210-trats.dts b/dts/src/arm/exynos4210-trats.dts index 6882480dba..7c39dd1c4d 100644 --- a/dts/src/arm/exynos4210-trats.dts +++ b/dts/src/arm/exynos4210-trats.dts @@ -239,6 +239,10 @@ status = "okay"; }; +&gpu { + status = "okay"; +}; + &hsotg { vusb_d-supply = <&vusb_reg>; vusb_a-supply = <&vusbdac_reg>; diff --git a/dts/src/arm/exynos4210-universal_c210.dts b/dts/src/arm/exynos4210-universal_c210.dts index bf092e97e1..82a8b54499 100644 --- a/dts/src/arm/exynos4210-universal_c210.dts +++ b/dts/src/arm/exynos4210-universal_c210.dts @@ -262,6 +262,11 @@ }; }; +&gpu { + mali-supply = <&buck2_reg>; + status = "okay"; +}; + &hdmi { hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; diff --git a/dts/src/arm/exynos4210.dtsi b/dts/src/arm/exynos4210.dtsi index b491c345b2..f220716239 100644 --- a/dts/src/arm/exynos4210.dtsi +++ b/dts/src/arm/exynos4210.dtsi @@ -8,7 +8,7 @@ * www.linaro.org * * Samsung's Exynos4210 SoC device nodes are listed in this file. Exynos4210 - * based board files can include this file and provide values for board specfic + * based board files can include this file and provide values for board specific * bindings. * * Note: This file does not include device nodes for all the controllers in @@ -381,13 +381,13 @@ trips { cpu_alert0: cpu-alert-0 { - temperature = <85000>; /* millicelsius */ + temperature = <85000>; /* millicelsius */ }; cpu_alert1: cpu-alert-1 { - temperature = <100000>; /* millicelsius */ + temperature = <100000>; /* millicelsius */ }; cpu_alert2: cpu-alert-2 { - temperature = <110000>; /* millicelsius */ + temperature = <110000>; /* millicelsius */ }; }; }; @@ -449,6 +449,43 @@ samsung,lcd-wb; }; +&gpu { + interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "gp", + "gpmmu", + "pp0", + "ppmmu0", + "pp1", + "ppmmu1", + "pp2", + "ppmmu2", + "pp3", + "ppmmu3"; + operating-points-v2 = <&gpu_opp_table>; + + gpu_opp_table: opp_table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + opp-microvolt = <950000>; + }; + opp-267000000 { + opp-hz = /bits/ 64 <267000000>; + opp-microvolt = <1050000>; + }; + }; +}; + &mdma1 { power-domains = <&pd_lcd0>; }; @@ -461,6 +498,12 @@ <&clock CLK_MOUT_MIXER>, <&clock CLK_SCLK_MIXER>; }; +&pmu { + interrupts = <2 2>, <3 2>; + interrupt-affinity = <&cpu0>, <&cpu1>; + status = "okay"; +}; + &pmu_system_controller { clock-names = "clkout0", "clkout1", "clkout2", "clkout3", "clkout4", "clkout8", "clkout9"; diff --git a/dts/src/arm/exynos4412-galaxy-s3.dtsi b/dts/src/arm/exynos4412-galaxy-s3.dtsi index 30eee5942e..ce87d2ff27 100644 --- a/dts/src/arm/exynos4412-galaxy-s3.dtsi +++ b/dts/src/arm/exynos4412-galaxy-s3.dtsi @@ -15,6 +15,24 @@ i2c10 = &i2c_cm36651; }; + aat1290 { + compatible = "skyworks,aat1290"; + flen-gpios = <&gpj1 1 GPIO_ACTIVE_HIGH>; + enset-gpios = <&gpj1 2 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default", "host", "isp"; + pinctrl-0 = <&camera_flash_host>; + pinctrl-1 = <&camera_flash_host>; + pinctrl-2 = <&camera_flash_isp>; + + flash-led { + label = "flash"; + led-max-microamp = <520833>; + flash-max-microamp = <1012500>; + flash-max-timeout-us = <1940000>; + }; + }; + lcd_vdd3_reg: voltage-regulator-6 { compatible = "regulator-fixed"; regulator-name = "LCD_VDD_2.2V"; @@ -131,6 +149,20 @@ regulator-max-microvolt = <2800000>; }; +&pinctrl_0 { + camera_flash_host: camera-flash-host { + samsung,pins = "gpj1-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-val = <0>; + }; + + camera_flash_isp: camera-flash-isp { + samsung,pins = "gpj1-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-val = <1>; + }; +}; + &s5c73m3 { standby-gpios = <&gpm0 1 GPIO_ACTIVE_LOW>; /* ISP_STANDBY */ vdda-supply = <&ldo17_reg>; diff --git a/dts/src/arm/exynos4412-itop-scp-core.dtsi b/dts/src/arm/exynos4412-itop-scp-core.dtsi index 0038465f38..462a5409b1 100644 --- a/dts/src/arm/exynos4412-itop-scp-core.dtsi +++ b/dts/src/arm/exynos4412-itop-scp-core.dtsi @@ -115,6 +115,11 @@ cpu0-supply = <&buck2_reg>; }; +&gpu { + mali-supply = <&buck4_reg>; + status = "okay"; +}; + &hsotg { vusb_d-supply = <&ldo15_reg>; vusb_a-supply = <&ldo12_reg>; diff --git a/dts/src/arm/exynos4412-midas.dtsi b/dts/src/arm/exynos4412-midas.dtsi index 4c15cb616c..83be3a7974 100644 --- a/dts/src/arm/exynos4412-midas.dtsi +++ b/dts/src/arm/exynos4412-midas.dtsi @@ -453,6 +453,11 @@ status = "okay"; }; +&gpu { + mali-supply = <&buck4_reg>; + status = "okay"; +}; + &hdmi { hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; diff --git a/dts/src/arm/exynos4412-odroid-common.dtsi b/dts/src/arm/exynos4412-odroid-common.dtsi index 08d3a0a7b4..ea55f377d1 100644 --- a/dts/src/arm/exynos4412-odroid-common.dtsi +++ b/dts/src/arm/exynos4412-odroid-common.dtsi @@ -229,6 +229,11 @@ assigned-clock-rates = <0>, <176000000>; }; +&gpu { + mali-supply = <&buck4_reg>; + status = "okay"; +}; + &hdmi { hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; diff --git a/dts/src/arm/exynos4412-prime.dtsi b/dts/src/arm/exynos4412-prime.dtsi index d83fbd4e43..3731a225f7 100644 --- a/dts/src/arm/exynos4412-prime.dtsi +++ b/dts/src/arm/exynos4412-prime.dtsi @@ -38,3 +38,10 @@ cooling-device = <&cpu0 15 15>, <&cpu1 15 15>, <&cpu2 15 15>, <&cpu3 15 15>; }; + +&gpu_opp_table { + opp-533000000 { + opp-hz = /bits/ 64 <533000000>; + opp-microvolt = <1075000>; + }; +}; diff --git a/dts/src/arm/exynos4412.dtsi b/dts/src/arm/exynos4412.dtsi index e5c041ec07..d20db2dfe8 100644 --- a/dts/src/arm/exynos4412.dtsi +++ b/dts/src/arm/exynos4412.dtsi @@ -716,6 +716,53 @@ cpu-offset = <0x4000>; }; +&gpu { + interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "gp", + "gpmmu", + "pp0", + "ppmmu0", + "pp1", + "ppmmu1", + "pp2", + "ppmmu2", + "pp3", + "ppmmu3", + "pmu"; + operating-points-v2 = <&gpu_opp_table>; + + gpu_opp_table: opp_table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + opp-microvolt = <875000>; + }; + opp-267000000 { + opp-hz = /bits/ 64 <267000000>; + opp-microvolt = <900000>; + }; + opp-350000000 { + opp-hz = /bits/ 64 <350000000>; + opp-microvolt = <950000>; + }; + opp-440000000 { + opp-hz = /bits/ 64 <440000000>; + opp-microvolt = <1025000>; + }; + }; +}; + &hdmi { compatible = "samsung,exynos4212-hdmi"; }; @@ -737,6 +784,8 @@ &pmu { interrupts = <2 2>, <3 2>, <18 2>, <19 2>; + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; + status = "okay"; }; &pmu_system_controller { diff --git a/dts/src/arm/exynos5410-odroidxu.dts b/dts/src/arm/exynos5410-odroidxu.dts index 8f9e08f940..e0db251e25 100644 --- a/dts/src/arm/exynos5410-odroidxu.dts +++ b/dts/src/arm/exynos5410-odroidxu.dts @@ -85,6 +85,11 @@ }; }; +&adc { + vdd-supply = <&ldo10_reg>; + status = "okay"; +}; + &audi2s0 { status = "okay"; }; diff --git a/dts/src/arm/exynos5410.dtsi b/dts/src/arm/exynos5410.dtsi index 57fc9c949e..e6f78b1cee 100644 --- a/dts/src/arm/exynos5410.dtsi +++ b/dts/src/arm/exynos5410.dtsi @@ -260,6 +260,12 @@ }; }; +&adc { + clocks = <&clock CLK_TSADC>; + clock-names = "adc"; + samsung,syscon-phandle = <&pmu_system_controller>; +}; + &arm_a15_pmu { interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; status = "okay"; diff --git a/dts/src/arm/exynos5420-arndale-octa.dts b/dts/src/arm/exynos5420-arndale-octa.dts index dbf0306896..592d7b45ec 100644 --- a/dts/src/arm/exynos5420-arndale-octa.dts +++ b/dts/src/arm/exynos5420-arndale-octa.dts @@ -386,6 +386,10 @@ * (Linaro for Arndale Octa, v2012.07). */ regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo4_reg: LDO4 { @@ -411,6 +415,10 @@ regulator-name = "PVDD_ANAIP_1V8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo8_reg: LDO8 { @@ -451,6 +459,10 @@ regulator-name = "PVDD_APIO_MMCOFF_2V8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <2800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo14_reg: LDO14 { @@ -464,12 +476,20 @@ regulator-name = "PVDD_PERI_2V8"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-on-in-suspend; + }; }; ldo16_reg: LDO16 { regulator-name = "PVDD_PERI_3V3"; regulator-min-microvolt = <2200000>; regulator-max-microvolt = <2200000>; + + regulator-state-mem { + regulator-on-in-suspend; + }; }; ldo17_reg: LDO17 { @@ -483,12 +503,28 @@ regulator-name = "PVDD_EMMC_1V8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + /* + * Must stay in "off" mode during shutdown for + * proper eMMC reset. The "off" mode is in + * fact controlled by LDO18EN. The eMMC does + * not have reset pin connected so the reset + * will be triggered by falling edge of + * LDO18EN. + */ + + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo19_reg: LDO19 { regulator-name = "PVDD_TFLASH_2V8"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo20_reg: LDO20 { @@ -515,12 +551,20 @@ regulator-min-microvolt = <800000>; regulator-max-microvolt = <1100000>; regulator-always-on; + + regulator-state-mem { + regulator-on-in-suspend; + }; }; ldo24_reg: LDO24 { regulator-name = "PVDD_CAM1_AVDD_2V8"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; + + regulator-state-mem { + regulator-on-in-suspend; + }; }; ldo25_reg: LDO25 { @@ -540,6 +584,10 @@ regulator-name = "PVDD_G3DS_1V0"; regulator-min-microvolt = <800000>; regulator-max-microvolt = <1100000>; + + regulator-state-mem { + regulator-on-in-suspend; + }; }; ldo28_reg: LDO28 { @@ -615,55 +663,75 @@ buck1_reg: BUCK1 { regulator-name = "PVDD_MIF_1V1"; regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1100000>; + regulator-max-microvolt = <1300000>; regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; buck2_reg: BUCK2 { regulator-name = "vdd_arm"; regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1000000>; + regulator-max-microvolt = <1500000>; regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; buck3_reg: BUCK3 { regulator-name = "PVDD_INT_1V0"; regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; buck4_reg: BUCK4 { regulator-name = "PVDD_G3D_1V0"; regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; buck5_reg: BUCK5 { regulator-name = "PVDD_LPDDR3_1V2"; regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1200000>; + regulator-max-microvolt = <1400000>; regulator-always-on; }; buck6_reg: BUCK6 { regulator-name = "PVDD_KFC_1V0"; regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1000000>; + regulator-max-microvolt = <1500000>; regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; buck7_reg: BUCK7 { regulator-name = "VIN_LLDO_1V4"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1400000>; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1500000>; regulator-always-on; }; buck8_reg: BUCK8 { regulator-name = "VIN_MLDO_2V0"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <2000000>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2100000>; regulator-always-on; }; @@ -678,6 +746,18 @@ regulator-name = "PVDD_EMMCF_2V8"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; + /* + * Must stay in "off" mode during shutdown for + * proper eMMC reset. The "off" mode is in + * fact controlled by BUCK10EN. The eMMC does + * not have reset pin connected so the reset + * will be triggered by falling edge of + * BUCK10EN. + */ + + regulator-state-mem { + regulator-off-in-suspend; + }; }; }; }; @@ -700,7 +780,7 @@ samsung,dw-mshc-ddr-timing = <0 2>; pinctrl-names = "default"; pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>; - vmmc-supply = <&ldo10_reg>; + vmmc-supply = <&ldo18_reg>; vqmmc-supply = <&ldo3_reg>; bus-width = <8>; cap-mmc-highspeed; diff --git a/dts/src/arm/exynos5420.dtsi b/dts/src/arm/exynos5420.dtsi index 5fb2326875..55d4dbf6f8 100644 --- a/dts/src/arm/exynos5420.dtsi +++ b/dts/src/arm/exynos5420.dtsi @@ -42,117 +42,119 @@ * by exynos5420-cpus.dtsi or exynos5422-cpus.dtsi. */ - soc: soc { - cluster_a15_opp_table: opp_table0 { - compatible = "operating-points-v2"; - opp-shared; - opp-1800000000 { - opp-hz = /bits/ 64 <1800000000>; - opp-microvolt = <1250000>; - clock-latency-ns = <140000>; - }; - opp-1700000000 { - opp-hz = /bits/ 64 <1700000000>; - opp-microvolt = <1212500>; - clock-latency-ns = <140000>; - }; - opp-1600000000 { - opp-hz = /bits/ 64 <1600000000>; - opp-microvolt = <1175000>; - clock-latency-ns = <140000>; - }; - opp-1500000000 { - opp-hz = /bits/ 64 <1500000000>; - opp-microvolt = <1137500>; - clock-latency-ns = <140000>; - }; - opp-1400000000 { - opp-hz = /bits/ 64 <1400000000>; - opp-microvolt = <1112500>; - clock-latency-ns = <140000>; - }; - opp-1300000000 { - opp-hz = /bits/ 64 <1300000000>; - opp-microvolt = <1062500>; - clock-latency-ns = <140000>; - }; - opp-1200000000 { - opp-hz = /bits/ 64 <1200000000>; - opp-microvolt = <1037500>; - clock-latency-ns = <140000>; - }; - opp-1100000000 { - opp-hz = /bits/ 64 <1100000000>; - opp-microvolt = <1012500>; - clock-latency-ns = <140000>; - }; - opp-1000000000 { - opp-hz = /bits/ 64 <1000000000>; - opp-microvolt = < 987500>; - clock-latency-ns = <140000>; - }; - opp-900000000 { - opp-hz = /bits/ 64 <900000000>; - opp-microvolt = < 962500>; - clock-latency-ns = <140000>; - }; - opp-800000000 { - opp-hz = /bits/ 64 <800000000>; - opp-microvolt = < 937500>; - clock-latency-ns = <140000>; - }; - opp-700000000 { - opp-hz = /bits/ 64 <700000000>; - opp-microvolt = < 912500>; - clock-latency-ns = <140000>; - }; + cluster_a15_opp_table: opp_table0 { + compatible = "operating-points-v2"; + opp-shared; + + opp-1800000000 { + opp-hz = /bits/ 64 <1800000000>; + opp-microvolt = <1250000>; + clock-latency-ns = <140000>; + }; + opp-1700000000 { + opp-hz = /bits/ 64 <1700000000>; + opp-microvolt = <1212500>; + clock-latency-ns = <140000>; + }; + opp-1600000000 { + opp-hz = /bits/ 64 <1600000000>; + opp-microvolt = <1175000>; + clock-latency-ns = <140000>; + }; + opp-1500000000 { + opp-hz = /bits/ 64 <1500000000>; + opp-microvolt = <1137500>; + clock-latency-ns = <140000>; + }; + opp-1400000000 { + opp-hz = /bits/ 64 <1400000000>; + opp-microvolt = <1112500>; + clock-latency-ns = <140000>; + }; + opp-1300000000 { + opp-hz = /bits/ 64 <1300000000>; + opp-microvolt = <1062500>; + clock-latency-ns = <140000>; + }; + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <1037500>; + clock-latency-ns = <140000>; + }; + opp-1100000000 { + opp-hz = /bits/ 64 <1100000000>; + opp-microvolt = <1012500>; + clock-latency-ns = <140000>; + }; + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = < 987500>; + clock-latency-ns = <140000>; + }; + opp-900000000 { + opp-hz = /bits/ 64 <900000000>; + opp-microvolt = < 962500>; + clock-latency-ns = <140000>; + }; + opp-800000000 { + opp-hz = /bits/ 64 <800000000>; + opp-microvolt = < 937500>; + clock-latency-ns = <140000>; + }; + opp-700000000 { + opp-hz = /bits/ 64 <700000000>; + opp-microvolt = < 912500>; + clock-latency-ns = <140000>; }; + }; - cluster_a7_opp_table: opp_table1 { - compatible = "operating-points-v2"; - opp-shared; - opp-1300000000 { - opp-hz = /bits/ 64 <1300000000>; - opp-microvolt = <1275000>; - clock-latency-ns = <140000>; - }; - opp-1200000000 { - opp-hz = /bits/ 64 <1200000000>; - opp-microvolt = <1212500>; - clock-latency-ns = <140000>; - }; - opp-1100000000 { - opp-hz = /bits/ 64 <1100000000>; - opp-microvolt = <1162500>; - clock-latency-ns = <140000>; - }; - opp-1000000000 { - opp-hz = /bits/ 64 <1000000000>; - opp-microvolt = <1112500>; - clock-latency-ns = <140000>; - }; - opp-900000000 { - opp-hz = /bits/ 64 <900000000>; - opp-microvolt = <1062500>; - clock-latency-ns = <140000>; - }; - opp-800000000 { - opp-hz = /bits/ 64 <800000000>; - opp-microvolt = <1025000>; - clock-latency-ns = <140000>; - }; - opp-700000000 { - opp-hz = /bits/ 64 <700000000>; - opp-microvolt = <975000>; - clock-latency-ns = <140000>; - }; - opp-600000000 { - opp-hz = /bits/ 64 <600000000>; - opp-microvolt = <937500>; - clock-latency-ns = <140000>; - }; + cluster_a7_opp_table: opp_table1 { + compatible = "operating-points-v2"; + opp-shared; + + opp-1300000000 { + opp-hz = /bits/ 64 <1300000000>; + opp-microvolt = <1275000>; + clock-latency-ns = <140000>; + }; + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <1212500>; + clock-latency-ns = <140000>; + }; + opp-1100000000 { + opp-hz = /bits/ 64 <1100000000>; + opp-microvolt = <1162500>; + clock-latency-ns = <140000>; + }; + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <1112500>; + clock-latency-ns = <140000>; + }; + opp-900000000 { + opp-hz = /bits/ 64 <900000000>; + opp-microvolt = <1062500>; + clock-latency-ns = <140000>; + }; + opp-800000000 { + opp-hz = /bits/ 64 <800000000>; + opp-microvolt = <1025000>; + clock-latency-ns = <140000>; + }; + opp-700000000 { + opp-hz = /bits/ 64 <700000000>; + opp-microvolt = <975000>; + clock-latency-ns = <140000>; + }; + opp-600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <937500>; + clock-latency-ns = <140000>; }; + }; + soc: soc { cci: cci@10d20000 { compatible = "arm,cci-400"; #address-cells = <1>; @@ -548,18 +550,6 @@ status = "disabled"; }; - adc: adc@12d10000 { - compatible = "samsung,exynos-adc-v2"; - reg = <0x12D10000 0x100>; - interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock CLK_TSADC>; - clock-names = "adc"; - #io-channel-cells = <1>; - io-channel-ranges; - samsung,syscon-phandle = <&pmu_system_controller>; - status = "disabled"; - }; - hsi2c_8: i2c@12e00000 { compatible = "samsung,exynos5250-hsi2c"; reg = <0x12E00000 0x1000>; @@ -1363,6 +1353,12 @@ }; }; +&adc { + clocks = <&clock CLK_TSADC>; + clock-names = "adc"; + samsung,syscon-phandle = <&pmu_system_controller>; +}; + &dp { clocks = <&clock CLK_DP1>; clock-names = "dp"; diff --git a/dts/src/arm/exynos5422-odroid-core.dtsi b/dts/src/arm/exynos5422-odroid-core.dtsi index 25d95de15c..829147e320 100644 --- a/dts/src/arm/exynos5422-odroid-core.dtsi +++ b/dts/src/arm/exynos5422-odroid-core.dtsi @@ -177,6 +177,10 @@ regulator-name = "vdd_adc"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo5_reg: LDO5 { @@ -184,6 +188,10 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo6_reg: LDO6 { @@ -191,6 +199,10 @@ regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo7_reg: LDO7 { @@ -198,6 +210,10 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo8_reg: LDO8 { @@ -205,6 +221,10 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo9_reg: LDO9 { @@ -212,6 +232,10 @@ regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo10_reg: LDO10 { @@ -219,6 +243,10 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo11_reg: LDO11 { @@ -226,6 +254,10 @@ regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo12_reg: LDO12 { @@ -239,6 +271,10 @@ regulator-name = "vddq_mmc2"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <2800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo14_reg: LDO14 { @@ -253,6 +289,10 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo16_reg: LDO16 { @@ -267,18 +307,30 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo18_reg: LDO18 { regulator-name = "vdd_emmc_1V8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo19_reg: LDO19 { regulator-name = "vdd_sd"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo20_reg: LDO20 { @@ -307,6 +359,10 @@ regulator-min-microvolt = <1100000>; regulator-max-microvolt = <1100000>; regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo24_reg: LDO24 { @@ -328,6 +384,10 @@ regulator-name = "vdd_ldo26"; regulator-min-microvolt = <800000>; regulator-max-microvolt = <3950000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo27_reg: LDO27 { @@ -335,6 +395,10 @@ regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo28_reg: LDO28 { @@ -342,6 +406,10 @@ regulator-name = "vdd_ldo28"; regulator-min-microvolt = <800000>; regulator-max-microvolt = <3950000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo29_reg: LDO29 { @@ -420,6 +488,10 @@ regulator-max-microvolt = <1300000>; regulator-always-on; regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; buck2_reg: BUCK2 { @@ -428,6 +500,10 @@ regulator-max-microvolt = <1500000>; regulator-always-on; regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; buck3_reg: BUCK3 { @@ -436,6 +512,10 @@ regulator-max-microvolt = <1400000>; regulator-always-on; regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; buck4_reg: BUCK4 { @@ -444,6 +524,10 @@ regulator-max-microvolt = <1400000>; regulator-always-on; regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; buck5_reg: BUCK5 { @@ -460,20 +544,24 @@ regulator-max-microvolt = <1500000>; regulator-always-on; regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; buck7_reg: BUCK7 { - regulator-name = "vdd_1.0v_ldo"; - regulator-min-microvolt = <800000>; + regulator-name = "vdd_1.35v_ldo"; + regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1500000>; regulator-always-on; regulator-boot-on; }; buck8_reg: BUCK8 { - regulator-name = "vdd_1.8v_ldo"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <2000000>; + regulator-name = "vdd_2.0v_ldo"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2100000>; regulator-always-on; regulator-boot-on; }; @@ -484,14 +572,20 @@ regulator-max-microvolt = <3750000>; regulator-always-on; regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; buck10_reg: BUCK10 { regulator-name = "vdd_vmem"; regulator-min-microvolt = <2850000>; regulator-max-microvolt = <2850000>; - regulator-always-on; - regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; }; }; diff --git a/dts/src/arm/exynos5422-odroidxu3-common.dtsi b/dts/src/arm/exynos5422-odroidxu3-common.dtsi index 93a48f2dda..8388720374 100644 --- a/dts/src/arm/exynos5422-odroidxu3-common.dtsi +++ b/dts/src/arm/exynos5422-odroidxu3-common.dtsi @@ -360,6 +360,12 @@ }; }; +&buck10_reg { + /* Supplies vmmc-supply of mmc_0 */ + regulator-always-on; + regulator-boot-on; +}; + &hdmi { status = "okay"; ddc = <&i2c_2>; diff --git a/dts/src/arm/exynos54xx.dtsi b/dts/src/arm/exynos54xx.dtsi index ae866bcc30..0b27bebf95 100644 --- a/dts/src/arm/exynos54xx.dtsi +++ b/dts/src/arm/exynos54xx.dtsi @@ -96,6 +96,15 @@ interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; }; + adc: adc@12d10000 { + compatible = "samsung,exynos-adc-v2"; + reg = <0x12d10000 0x100>; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; + #io-channel-cells = <1>; + io-channel-ranges; + status = "disabled"; + }; + /* i2c_0-3 are defined in exynos5.dtsi */ hsi2c_4: i2c@12ca0000 { compatible = "samsung,exynos5250-hsi2c"; diff --git a/dts/src/arm/gemini-dlink-dir-685.dts b/dts/src/arm/gemini-dlink-dir-685.dts index cfbfbc91a1..bfaa2de63a 100644 --- a/dts/src/arm/gemini-dlink-dir-685.dts +++ b/dts/src/arm/gemini-dlink-dir-685.dts @@ -20,7 +20,7 @@ }; chosen { - bootargs = "console=ttyS0,19200n8 root=/dev/sda1 rw rootwait"; + bootargs = "console=ttyS0,19200n8 root=/dev/sda1 rw rootwait consoleblank=300"; stdout-path = "uart0:19200n8"; }; @@ -64,7 +64,7 @@ gpio-sck = <&gpio1 5 GPIO_ACTIVE_HIGH>; gpio-miso = <&gpio1 8 GPIO_ACTIVE_HIGH>; gpio-mosi = <&gpio1 7 GPIO_ACTIVE_HIGH>; - cs-gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio0 20 GPIO_ACTIVE_LOW>; num-chipselects = <1>; panel: display@0 { diff --git a/dts/src/arm/gemini-dlink-dns-313.dts b/dts/src/arm/gemini-dlink-dns-313.dts index b12504e10f..360642a02a 100644 --- a/dts/src/arm/gemini-dlink-dns-313.dts +++ b/dts/src/arm/gemini-dlink-dns-313.dts @@ -11,7 +11,7 @@ / { model = "D-Link DNS-313 1-Bay Network Storage Enclosure"; - compatible = "dlink,dir-313", "cortina,gemini"; + compatible = "dlink,dns-313", "cortina,gemini"; #address-cells = <1>; #size-cells = <1>; diff --git a/dts/src/arm/hip04.dtsi b/dts/src/arm/hip04.dtsi index bf0cb55809..4263a9339c 100644 --- a/dts/src/arm/hip04.dtsi +++ b/dts/src/arm/hip04.dtsi @@ -347,7 +347,7 @@ /* non-configurable replicators don't show up on the * AMBA bus. As such no need to add "arm,primecell". */ - compatible = "arm,coresight-replicator"; + compatible = "arm,coresight-static-replicator"; out-ports { #address-cells = <1>; @@ -382,7 +382,7 @@ /* non-configurable replicators don't show up on the * AMBA bus. As such no need to add "arm,primecell". */ - compatible = "arm,coresight-replicator"; + compatible = "arm,coresight-static-replicator"; out-ports { #address-cells = <1>; @@ -417,7 +417,7 @@ /* non-configurable replicators don't show up on the * AMBA bus. As such no need to add "arm,primecell". */ - compatible = "arm,coresight-replicator"; + compatible = "arm,coresight-static-replicator"; out-ports { #address-cells = <1>; @@ -451,7 +451,7 @@ /* non-configurable replicators don't show up on the * AMBA bus. As such no need to add "arm,primecell". */ - compatible = "arm,coresight-replicator"; + compatible = "arm,coresight-static-replicator"; out-ports { #address-cells = <1>; @@ -482,7 +482,7 @@ }; funnel@0,e3c41000 { - compatible = "arm,coresight-funnel", "arm,primecell"; + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0 0xe3c41000 0 0x1000>; clocks = <&clk_375m>; @@ -531,7 +531,7 @@ }; funnel@0,e3c81000 { - compatible = "arm,coresight-funnel", "arm,primecell"; + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0 0xe3c81000 0 0x1000>; clocks = <&clk_375m>; @@ -580,7 +580,7 @@ }; funnel@0,e3cc1000 { - compatible = "arm,coresight-funnel", "arm,primecell"; + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0 0xe3cc1000 0 0x1000>; clocks = <&clk_375m>; @@ -629,7 +629,7 @@ }; funnel@0,e3d01000 { - compatible = "arm,coresight-funnel", "arm,primecell"; + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0 0xe3d01000 0 0x1000>; clocks = <&clk_375m>; @@ -678,7 +678,7 @@ }; funnel@0,e3c04000 { - compatible = "arm,coresight-funnel", "arm,primecell"; + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0 0xe3c04000 0 0x1000>; clocks = <&clk_375m>; diff --git a/dts/src/arm/ibm-power9-dual.dtsi b/dts/src/arm/ibm-power9-dual.dtsi new file mode 100644 index 0000000000..2abc42eda7 --- /dev/null +++ b/dts/src/arm/ibm-power9-dual.dtsi @@ -0,0 +1,248 @@ +// SPDX-License-Identifier: GPL-2.0+ +// Copyright 2018 IBM Corp + +&fsi { + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom@1000 { + compatible = "ibm,fsi2pib"; + reg = <0x1000 0x400>; + }; + + i2c@1800 { + compatible = "ibm,fsi-i2c-master"; + reg = <0x1800 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + cfam0_i2c0: i2c-bus@0 { + reg = <0>; + }; + + cfam0_i2c1: i2c-bus@1 { + reg = <1>; + }; + + cfam0_i2c2: i2c-bus@2 { + reg = <2>; + }; + + cfam0_i2c3: i2c-bus@3 { + reg = <3>; + }; + + cfam0_i2c4: i2c-bus@4 { + reg = <4>; + }; + + cfam0_i2c5: i2c-bus@5 { + reg = <5>; + }; + + cfam0_i2c6: i2c-bus@6 { + reg = <6>; + }; + + cfam0_i2c7: i2c-bus@7 { + reg = <7>; + }; + + cfam0_i2c8: i2c-bus@8 { + reg = <8>; + }; + + cfam0_i2c9: i2c-bus@9 { + reg = <9>; + }; + + cfam0_i2c10: i2c-bus@a { + reg = <10>; + }; + + cfam0_i2c11: i2c-bus@b { + reg = <11>; + }; + + cfam0_i2c12: i2c-bus@c { + reg = <12>; + }; + + cfam0_i2c13: i2c-bus@d { + reg = <13>; + }; + + cfam0_i2c14: i2c-bus@e { + reg = <14>; + }; + }; + + sbefifo@2400 { + compatible = "ibm,p9-sbefifo"; + reg = <0x2400 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + fsi_occ0: occ { + compatible = "ibm,p9-occ"; + }; + }; + + fsi_hub0: hub@3400 { + compatible = "fsi-master-hub"; + reg = <0x3400 0x400>; + #address-cells = <2>; + #size-cells = <0>; + + no-scan-on-init; + }; + }; +}; + +&fsi_hub0 { + cfam@1,0 { + reg = <1 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <1>; + + scom@1000 { + compatible = "ibm,fsi2pib"; + reg = <0x1000 0x400>; + }; + + i2c@1800 { + compatible = "ibm,fsi-i2c-master"; + reg = <0x1800 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + cfam1_i2c0: i2c-bus@0 { + reg = <0>; + }; + + cfam1_i2c1: i2c-bus@1 { + reg = <1>; + }; + + cfam1_i2c2: i2c-bus@2 { + reg = <2>; + }; + + cfam1_i2c3: i2c-bus@3 { + reg = <3>; + }; + + cfam1_i2c4: i2c-bus@4 { + reg = <4>; + }; + + cfam1_i2c5: i2c-bus@5 { + reg = <5>; + }; + + cfam1_i2c6: i2c-bus@6 { + reg = <6>; + }; + + cfam1_i2c7: i2c-bus@7 { + reg = <7>; + }; + + cfam1_i2c8: i2c-bus@8 { + reg = <8>; + }; + + cfam1_i2c9: i2c-bus@9 { + reg = <9>; + }; + + cfam1_i2c10: i2c-bus@a { + reg = <10>; + }; + + cfam1_i2c11: i2c-bus@b { + reg = <11>; + }; + + cfam1_i2c12: i2c-bus@c { + reg = <12>; + }; + + cfam1_i2c13: i2c-bus@d { + reg = <13>; + }; + + cfam1_i2c14: i2c-bus@e { + reg = <14>; + }; + }; + + sbefifo@2400 { + compatible = "ibm,p9-sbefifo"; + reg = <0x2400 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + fsi_occ1: occ { + compatible = "ibm,p9-occ"; + }; + }; + + fsi_hub1: hub@3400 { + compatible = "fsi-master-hub"; + reg = <0x3400 0x400>; + #address-cells = <2>; + #size-cells = <0>; + + no-scan-on-init; + }; + }; +}; + +/* Legacy OCC numbering (to get rid of when userspace is fixed) */ +&fsi_occ0 { + reg = <1>; +}; + +&fsi_occ1 { + reg = <2>; +}; + +/ { + aliases { + i2c100 = &cfam0_i2c0; + i2c101 = &cfam0_i2c1; + i2c102 = &cfam0_i2c2; + i2c103 = &cfam0_i2c3; + i2c104 = &cfam0_i2c4; + i2c105 = &cfam0_i2c5; + i2c106 = &cfam0_i2c6; + i2c107 = &cfam0_i2c7; + i2c108 = &cfam0_i2c8; + i2c109 = &cfam0_i2c9; + i2c110 = &cfam0_i2c10; + i2c111 = &cfam0_i2c11; + i2c112 = &cfam0_i2c12; + i2c113 = &cfam0_i2c13; + i2c114 = &cfam0_i2c14; + i2c200 = &cfam1_i2c0; + i2c201 = &cfam1_i2c1; + i2c202 = &cfam1_i2c2; + i2c203 = &cfam1_i2c3; + i2c204 = &cfam1_i2c4; + i2c205 = &cfam1_i2c5; + i2c206 = &cfam1_i2c6; + i2c207 = &cfam1_i2c7; + i2c208 = &cfam1_i2c8; + i2c209 = &cfam1_i2c9; + i2c210 = &cfam1_i2c10; + i2c211 = &cfam1_i2c11; + i2c212 = &cfam1_i2c12; + i2c213 = &cfam1_i2c13; + i2c214 = &cfam1_i2c14; + }; +}; diff --git a/dts/src/arm/imx53-m53menlo.dts b/dts/src/arm/imx53-m53menlo.dts index f0a3fde073..10acc5331b 100644 --- a/dts/src/arm/imx53-m53menlo.dts +++ b/dts/src/arm/imx53-m53menlo.dts @@ -10,6 +10,25 @@ model = "MENLO M53 EMBEDDED DEVICE"; compatible = "menlo,m53menlo", "fsl,imx53"; + gpio-keys { + compatible = "gpio-keys"; + pinctrl-0 = <&pinctrl_power_button>; + pinctrl-names = "default"; + + power-button { + label = "Power button"; + gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + }; + }; + + gpio-poweroff { + compatible = "gpio-poweroff"; + pinctrl-0 = <&pinctrl_power_out>; + pinctrl-names = "default"; + gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -30,7 +49,7 @@ eth { label = "EthLedYe"; gpios = <&gpio2 11 GPIO_ACTIVE_LOW>; - linux,default-trigger = "none"; + linux,default-trigger = "netdev"; }; }; @@ -45,12 +64,19 @@ }; }; + beeper { + compatible = "gpio-beeper"; + pinctrl-0 = <&pinctrl_beeper>; + gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>; + }; + reg_usbh1_vbus: regulator-usbh1-vbus { compatible = "regulator-fixed"; regulator-name = "vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&gpio1 2 GPIO_ACTIVE_LOW>; + gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>; + enable-active-high; }; }; @@ -74,6 +100,25 @@ assigned-clock-rates = <133333334>, <33333334>, <33333334>; }; +&ecspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>, <&gpio2 27 GPIO_ACTIVE_HIGH>; + status = "okay"; + + spidev@0 { + compatible = "menlo,m53cpld"; + spi-max-frequency = <25000000>; + reg = <0>; + }; + + spidev@1 { + compatible = "menlo,m53cpld"; + spi-max-frequency = <25000000>; + reg = <1>; + }; +}; + &esdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc1>; @@ -86,9 +131,82 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fec>; phy-mode = "rmii"; + phy-reset-gpios = <&gpio7 7 GPIO_ACTIVE_LOW>; status = "okay"; }; +&gpio1 { + gpio-line-names = + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", ""; +}; + +&gpio2 { + gpio-line-names = + "", "", "", "", + "", "", "", "", + "TestPin_SV2_3", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", ""; +}; + +&gpio3 { + gpio-line-names = + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "CPLD_JTAG_TDI", "CPLD_JTAG_TMS", "", "", + "", "CPLD_JTAG_TDO", "", ""; +}; + +&gpio5 { + gpio-line-names = + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "CPLD_JTAG_TCK", "KBD_intK", + "CPLD_int", "CPLD_JTAG_internal", "CPLD_D[0]", "CPLD_D[1]", + "CPLD_D[2]", "CPLD_D[3]", "CPLD_D[4]", "CPLD_D[5]", + "CPLD_D[6]", "CPLD_D[7]", "DISP_reset", "KBD_intI"; +}; + +&gpio6 { + gpio-line-names = + "", "", "", "", + "CPLD_reset", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", ""; +}; + +&gpio7 { + gpio-line-names = + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "USB-OTG_OverCurrent", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", ""; +}; + &i2c1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1>; @@ -136,27 +254,37 @@ imx53-m53evk { hoggrp { fsl,pins = < - MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x1c4 - MX53_PAD_EIM_EB3__GPIO2_31 0x1d5 - MX53_PAD_PATA_DA_0__GPIO7_6 0x1d5 - MX53_PAD_GPIO_19__CCM_CLKO 0x1d5 - MX53_PAD_CSI0_MCLK__CCM_CSI0_MCLK 0x1d5 - MX53_PAD_CSI0_DAT4__GPIO5_22 0x1d5 - MX53_PAD_CSI0_DAT5__GPIO5_23 0x1d5 - MX53_PAD_CSI0_DAT6__GPIO5_24 0x1d5 - MX53_PAD_CSI0_DAT7__GPIO5_25 0x1d5 - MX53_PAD_CSI0_DAT8__GPIO5_26 0x1d5 - MX53_PAD_CSI0_DAT9__GPIO5_27 0x1d5 - MX53_PAD_CSI0_DAT10__GPIO5_28 0x1d5 - MX53_PAD_CSI0_DAT11__GPIO5_29 0x1d5 - MX53_PAD_CSI0_DAT14__GPIO6_0 0x1d5 + MX53_PAD_GPIO_19__CCM_CLKO 0x1e4 + MX53_PAD_CSI0_DATA_EN__GPIO5_20 0x1e4 + MX53_PAD_CSI0_DAT4__GPIO5_22 0x1e4 + MX53_PAD_CSI0_DAT5__GPIO5_23 0x1c4 + MX53_PAD_CSI0_DAT6__GPIO5_24 0x1e4 + MX53_PAD_CSI0_DAT7__GPIO5_25 0x1e4 + MX53_PAD_CSI0_DAT8__GPIO5_26 0x1e4 + MX53_PAD_CSI0_DAT9__GPIO5_27 0x1c4 + MX53_PAD_CSI0_DAT10__GPIO5_28 0x1e4 + MX53_PAD_CSI0_DAT11__GPIO5_29 0x1e4 + MX53_PAD_PATA_DATA11__GPIO2_11 0x1e4 + MX53_PAD_EIM_D24__GPIO3_24 0x1e4 + MX53_PAD_EIM_D25__GPIO3_25 0x1e4 + MX53_PAD_EIM_D29__GPIO3_29 0x1e4 + MX53_PAD_CSI0_PIXCLK__GPIO5_18 0x1e4 + MX53_PAD_CSI0_VSYNC__GPIO5_21 0x1e4 + MX53_PAD_CSI0_DAT18__GPIO6_4 0x1c4 + MX53_PAD_PATA_DATA8__GPIO2_8 0x1e4 >; }; pinctrl_led: ledgrp { fsl,pins = < - MX53_PAD_CSI0_DAT15__GPIO6_1 0x1d5 - MX53_PAD_CSI0_DAT16__GPIO6_2 0x1d5 + MX53_PAD_CSI0_DAT15__GPIO6_1 0x1c4 + MX53_PAD_CSI0_DAT16__GPIO6_2 0x1c4 + >; + }; + + pinctrl_beeper: beepergrp { + fsl,pins = < + MX53_PAD_CSI0_DAT17__GPIO6_3 0x1c4 >; }; @@ -169,49 +297,66 @@ pinctrl_can2: can2grp { fsl,pins = < - MX53_PAD_KEY_COL4__CAN2_TXCAN 0x1c4 + MX53_PAD_KEY_COL4__CAN2_TXCAN 0x1e4 MX53_PAD_KEY_ROW4__CAN2_RXCAN 0x1c4 >; }; pinctrl_display_gpio: display-gpiogrp { fsl,pins = < - MX53_PAD_CSI0_DAT12__GPIO5_30 0x1d5 /* Reset */ - MX53_PAD_CSI0_DAT13__GPIO5_31 0x1d5 /* Interrupt */ + MX53_PAD_CSI0_DAT12__GPIO5_30 0x1c4 /* Reset */ + MX53_PAD_CSI0_MCLK__GPIO5_19 0x1e4 /* Int-K */ + MX53_PAD_CSI0_DAT13__GPIO5_31 0x1c4 /* Int-I */ + + MX53_PAD_CSI0_DAT14__GPIO6_0 0x1c4 /* Power down */ >; }; pinctrl_edt_ft5x06: edt-ft5x06grp { fsl,pins = < - MX53_PAD_PATA_DATA9__GPIO2_9 0x1d5 /* Reset */ - MX53_PAD_CSI0_DAT19__GPIO6_5 0x1d5 /* Interrupt */ - MX53_PAD_PATA_DATA10__GPIO2_10 0x1d5 /* Wake */ + MX53_PAD_PATA_DATA9__GPIO2_9 0x1e4 /* Reset */ + MX53_PAD_CSI0_DAT19__GPIO6_5 0x1c4 /* Interrupt */ + MX53_PAD_PATA_DATA10__GPIO2_10 0x1e4 /* Wake */ + >; + }; + + pinctrl_ecspi2: ecspi2grp { + fsl,pins = < + MX53_PAD_EIM_CS0__ECSPI2_SCLK 0xe4 + MX53_PAD_EIM_OE__ECSPI2_MISO 0xe4 + MX53_PAD_EIM_CS1__ECSPI2_MOSI 0xe4 + MX53_PAD_EIM_RW__GPIO2_26 0xe4 + MX53_PAD_EIM_LBA__GPIO2_27 0xe4 >; }; pinctrl_esdhc1: esdhc1grp { fsl,pins = < - MX53_PAD_SD1_DATA0__ESDHC1_DAT0 0x1d5 - MX53_PAD_SD1_DATA1__ESDHC1_DAT1 0x1d5 - MX53_PAD_SD1_DATA2__ESDHC1_DAT2 0x1d5 - MX53_PAD_SD1_DATA3__ESDHC1_DAT3 0x1d5 - MX53_PAD_SD1_CMD__ESDHC1_CMD 0x1d5 - MX53_PAD_SD1_CLK__ESDHC1_CLK 0x1d5 + MX53_PAD_SD1_DATA0__ESDHC1_DAT0 0x1e4 + MX53_PAD_SD1_DATA1__ESDHC1_DAT1 0x1e4 + MX53_PAD_SD1_DATA2__ESDHC1_DAT2 0x1e4 + MX53_PAD_SD1_DATA3__ESDHC1_DAT3 0x1e4 + MX53_PAD_SD1_CMD__ESDHC1_CMD 0x1e4 + MX53_PAD_SD1_CLK__ESDHC1_CLK 0x1e4 + MX53_PAD_GPIO_1__GPIO1_1 0x1c4 + MX53_PAD_GPIO_9__GPIO1_9 0x1e4 >; }; pinctrl_fec: fecgrp { fsl,pins = < - MX53_PAD_FEC_MDC__FEC_MDC 0x4 - MX53_PAD_FEC_MDIO__FEC_MDIO 0x1fc - MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x180 - MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x180 - MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x180 - MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x180 - MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x180 - MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x4 - MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x4 - MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x4 + MX53_PAD_FEC_MDC__FEC_MDC 0x1e4 + MX53_PAD_FEC_MDIO__FEC_MDIO 0x1e4 + MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x1e4 + MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x1e4 + MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x1e4 + MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x1e4 + MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x1e4 + MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x1c4 + MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x1e4 + MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x1e4 + MX53_PAD_PATA_DA_1__GPIO7_7 0x1e4 + MX53_PAD_EIM_EB3__GPIO2_31 0x1e4 >; }; @@ -240,10 +385,24 @@ >; }; + pinctrl_power_button: powerbutgrp { + fsl,pins = < + MX53_PAD_SD2_DATA2__GPIO1_13 0x1e4 + >; + }; + + pinctrl_power_out: poweroutgrp { + fsl,pins = < + MX53_PAD_SD2_DATA0__GPIO1_15 0x1e4 + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX53_PAD_PATA_DIOW__UART1_TXD_MUX 0x1e4 MX53_PAD_PATA_DMACK__UART1_RXD_MUX 0x1e4 + MX53_PAD_PATA_IORDY__UART1_RTS 0x1e4 + MX53_PAD_PATA_RESET_B__UART1_CTS 0x1e4 >; }; @@ -251,13 +410,25 @@ fsl,pins = < MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX 0x1e4 MX53_PAD_PATA_DMARQ__UART2_TXD_MUX 0x1e4 + MX53_PAD_PATA_DIOR__UART2_RTS 0x1e4 + MX53_PAD_PATA_INTRQ__UART2_CTS 0x1e4 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1e4 + MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1e4 + MX53_PAD_PATA_DA_2__UART3_RTS 0x1e4 >; }; pinctrl_usb: usbgrp { fsl,pins = < - MX53_PAD_GPIO_2__GPIO1_2 0x1d5 - MX53_PAD_GPIO_3__USBOH3_USBH1_OC 0x1d5 + MX53_PAD_GPIO_2__GPIO1_2 0x1c4 + MX53_PAD_GPIO_3__USBOH3_USBH1_OC 0x1c4 + MX53_PAD_GPIO_4__GPIO1_4 0x1c4 + MX53_PAD_GPIO_18__GPIO7_13 0x1c4 >; }; }; @@ -287,12 +458,21 @@ &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; + uart-has-rtscts; status = "okay"; }; &uart2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; + uart-has-rtscts; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + linux,rs485-enabled-at-boot-time; status = "okay"; }; @@ -301,7 +481,7 @@ pinctrl-0 = <&pinctrl_usb>; vbus-supply = <®_usbh1_vbus>; phy_type = "utmi"; - dr_mode = "peripheral"; + dr_mode = "host"; status = "okay"; }; diff --git a/dts/src/arm/imx53-smd.dts b/dts/src/arm/imx53-smd.dts index 09071ca11c..ec9fb8940f 100644 --- a/dts/src/arm/imx53-smd.dts +++ b/dts/src/arm/imx53-smd.dts @@ -185,6 +185,31 @@ >; }; + pinctrl_ipu_csi0: ipucsi0grp { + fsl,pins = < + MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12 0x1c4 + MX53_PAD_CSI0_DAT13__IPU_CSI0_D_13 0x1c4 + MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14 0x1c4 + MX53_PAD_CSI0_DAT15__IPU_CSI0_D_15 0x1c4 + MX53_PAD_CSI0_DAT16__IPU_CSI0_D_16 0x1c4 + MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17 0x1c4 + MX53_PAD_CSI0_DAT18__IPU_CSI0_D_18 0x1c4 + MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19 0x1c4 + MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK 0x1e4 + MX53_PAD_CSI0_VSYNC__IPU_CSI0_VSYNC 0x1e4 + MX53_PAD_CSI0_MCLK__IPU_CSI0_HSYNC 0x1e4 + MX53_PAD_CSI0_DATA_EN__IPU_CSI0_DATA_EN 0x1e4 + >; + }; + + pinctrl_ov5642: ov5642grp { + fsl,pins = < + MX53_PAD_NANDF_WP_B__GPIO6_9 0x1e4 + MX53_PAD_NANDF_RB0__GPIO6_10 0x1e4 + MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x1c4 + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX53_PAD_CSI0_DAT10__UART1_TXD_MUX 0x1e4 @@ -256,11 +281,47 @@ camera: ov5642@3c { compatible = "ovti,ov5642"; reg = <0x3c>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ov5642>; + assigned-clocks = <&clks IMX5_CLK_SSI_EXT1_SEL>, + <&clks IMX5_CLK_SSI_EXT1_COM_SEL>; + assigned-clock-parents = <&clks IMX5_CLK_PLL2_SW>, + <&clks IMX5_CLK_SSI_EXT1_PODF>; + assigned-clock-rates = <0>, <24000000>; + clocks = <&clks IMX5_CLK_SSI_EXT1_GATE>; + clock-names = "xclk"; + DVDD-supply = <&ldo9_reg>; + AVDD-supply = <&ldo7_reg>; + reset-gpios = <&gpio6 9 GPIO_ACTIVE_LOW>; + powerdown-gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>; + + port { + ov5642_to_ipu_csi0: endpoint { + remote-endpoint = <&ipu_csi0_from_parallel_sensor>; + bus-width = <8>; + hsync-active = <1>; + vsync-active = <1>; + }; + }; }; pmic: dialog@48 { compatible = "dlg,da9053", "dlg,da9052"; reg = <0x48>; + interrupt-parent = <&gpio7>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + + regulators { + ldo7_reg: ldo7 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3600000>; + }; + + ldo9_reg: ldo9 { + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <3650000>; + }; + }; }; }; @@ -271,3 +332,15 @@ phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>; status = "okay"; }; + +&ipu_csi0_from_parallel_sensor { + remote-endpoint = <&ov5642_to_ipu_csi0>; + data-shift = <12>; /* Lines 19:12 used */ + hsync-active = <1>; + vsync-active = <1>; +}; + +&ipu_csi0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu_csi0>; +}; diff --git a/dts/src/arm/imx53.dtsi b/dts/src/arm/imx53.dtsi index 9b672ed248..ed341cfd9d 100644 --- a/dts/src/arm/imx53.dtsi +++ b/dts/src/arm/imx53.dtsi @@ -31,6 +31,7 @@ i2c0 = &i2c1; i2c1 = &i2c2; i2c2 = &i2c3; + ipu0 = &ipu; mmc0 = &esdhc1; mmc1 = &esdhc2; mmc2 = &esdhc3; @@ -71,6 +72,11 @@ ports = <&ipu_di0>, <&ipu_di1>; }; + capture_subsystem { + compatible = "fsl,imx-capture-subsystem"; + ports = <&ipu_csi0>, <&ipu_csi1>; + }; + tzic: tz-interrupt-controller@fffc000 { compatible = "fsl,imx53-tzic", "fsl,tzic"; interrupt-controller; @@ -158,10 +164,16 @@ ipu_csi0: port@0 { reg = <0>; + + ipu_csi0_from_parallel_sensor: endpoint { + }; }; ipu_csi1: port@1 { reg = <1>; + + ipu_csi1_from_parallel_sensor: endpoint { + }; }; ipu_di0: port@2 { diff --git a/dts/src/arm/imx6dl-kontron-samx6i.dtsi b/dts/src/arm/imx6dl-kontron-samx6i.dtsi new file mode 100644 index 0000000000..a864fdbd5f --- /dev/null +++ b/dts/src/arm/imx6dl-kontron-samx6i.dtsi @@ -0,0 +1,12 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 +/* + * Copyright 2019 (C) Pengutronix, Marco Felsch <kernel@pengutronix.de> + */ + +#include "imx6dl.dtsi" +#include "imx6qdl-kontron-samx6i.dtsi" + +/ { + model = "Kontron SMARC sAMX6i Dual-Lite/Solo"; + compatible = "kontron,imx6dl-samx6i", "fsl,imx6dl"; +}; diff --git a/dts/src/arm/imx6q-kontron-samx6i.dtsi b/dts/src/arm/imx6q-kontron-samx6i.dtsi new file mode 100644 index 0000000000..2618eccfe5 --- /dev/null +++ b/dts/src/arm/imx6q-kontron-samx6i.dtsi @@ -0,0 +1,36 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 +/* + * Copyright 2019 (C) Pengutronix, Marco Felsch <kernel@pengutronix.de> + */ + +#include "imx6q.dtsi" +#include "imx6qdl-kontron-samx6i.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Kontron SMARC sAMX6i Quad/Dual"; + compatible = "kontron,imx6q-samx6i", "fsl,imx6q"; +}; + +/* Quad/Dual SoMs have 3 chip-select signals */ +&ecspi4 { + fsl,spi-num-chipselects = <3>; + cs-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>, + <&gpio3 29 GPIO_ACTIVE_HIGH>, + <&gpio3 25 GPIO_ACTIVE_HIGH>; +}; + +&pinctrl_ecspi4 { + fsl,pins = < + MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1 + MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x100b1 + MX6QDL_PAD_EIM_D22__ECSPI4_MISO 0x100b1 + + /* SPI4_IMX_CS2# - connected to internal flash */ + MX6QDL_PAD_EIM_D24__GPIO3_IO24 0x1b0b0 + /* SPI4_IMX_CS0# - connected to SMARC SPI0_CS0# */ + MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1b0b0 + /* SPI4_CS3# - connected to SMARC SPI0_CS1# */ + MX6QDL_PAD_EIM_D25__GPIO3_IO25 0x1b0b0 + >; +}; diff --git a/dts/src/arm/imx6qdl-kontron-samx6i.dtsi b/dts/src/arm/imx6qdl-kontron-samx6i.dtsi new file mode 100644 index 0000000000..81c7ebb4b3 --- /dev/null +++ b/dts/src/arm/imx6qdl-kontron-samx6i.dtsi @@ -0,0 +1,815 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 +/* + * Copyright 2017 (C) Priit Laes <plaes@plaes.org> + * Copyright 2018 (C) Pengutronix, Michael Grzeschik <mgr@pengutronix.de> + * Copyright 2019 (C) Pengutronix, Marco Felsch <kernel@pengutronix.de> + * + * Based on initial work by Nikita Yushchenko <nyushchenko at dev.rtsoft.ru> + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/sound/fsl-imx-audmux.h> + +/ { + reg_1p0v_s0: regulator-1p0v-s0 { + compatible = "regulator-fixed"; + regulator-name = "V_1V0_S0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <®_smarc_suppy>; + }; + + reg_1p35v_vcoredig_s5: regulator-1p35v-vcoredig-s5 { + compatible = "regulator-fixed"; + regulator-name = "V_1V35_VCOREDIG_S5"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <®_3p3v_s5>; + }; + + reg_1p8v_s5: regulator-1p8v-s5 { + compatible = "regulator-fixed"; + regulator-name = "V_1V8_S5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <®_3p3v_s5>; + }; + + reg_3p3v_s0: regulator-3p3v-s0 { + compatible = "regulator-fixed"; + regulator-name = "V_3V3_S0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <®_3p3v_s5>; + }; + + reg_3p3v_s0: regulator-3p3v-s0 { + compatible = "regulator-fixed"; + regulator-name = "V_3V3_S0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <®_3p3v_s5>; + }; + + reg_3p3v_s5: regulator-3p3v-s5 { + compatible = "regulator-fixed"; + regulator-name = "V_3V3_S5"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <®_smarc_suppy>; + }; + + reg_smarc_lcdbklt: regulator-smarc-lcdbklt { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcdbklt_en>; + regulator-name = "LCD_BKLT_EN"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio1 16 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_smarc_lcdvdd: regulator-smarc-lcdvdd { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcdvdd_en>; + regulator-name = "LCD_VDD_EN"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio1 17 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_smarc_rtc: regulator-smarc-rtc { + compatible = "regulator-fixed"; + regulator-name = "V_IN_RTC_BATT"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + /* Module supply range can be 3.00V ... 5.25V */ + reg_smarc_suppy: regulator-smarc-supply { + compatible = "regulator-fixed"; + regulator-name = "V_IN_WIDE"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + lcd: lcd { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx-parallel-display"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd>; + status = "disabled"; + + port@0 { + reg = <0>; + + lcd_in: endpoint { + }; + }; + + port@1 { + reg = <1>; + + lcd_out: endpoint { + }; + }; + }; + + lcd_backlight: lcd-backlight { + compatible = "pwm-backlight"; + pwms = <&pwm4 0 5000000>; + pwm-names = "LCD_BKLT_PWM"; + + brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; + default-brightness-level = <4>; + + power-supply = <®_smarc_lcdbklt>; + status = "disabled"; + }; + + i2c_intern: i2c-gpio-intern { + compatible = "i2c-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c_gpio_intern>; + sda-gpios = <&gpio1 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio1 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <2>; /* ~100 kHz */ + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c_lcd: i2c-gpio-lcd { + compatible = "i2c-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c_gpio_lcd>; + sda-gpios = <&gpio1 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio1 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <2>; /* ~100 kHz */ + #address-cells = <1>; + #size-cells = <0>; + status = "disabld"; + }; + + i2c_cam: i2c-gpio-cam { + compatible = "i2c-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c_gpio_cam>; + sda-gpios = <&gpio4 10 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <2>; /* ~100 kHz */ + #address-cells = <1>; + #size-cells = <0>; + status = "disabld"; + }; +}; + +/* I2S0, I2S1 */ +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + + audmux_ssi1 { + fsl,audmux-port = <MX51_AUDMUX_PORT1_SSI0>; + fsl,port-config = < + (IMX_AUDMUX_V2_PTCR_TFSEL(MX51_AUDMUX_PORT3) | + IMX_AUDMUX_V2_PTCR_TCSEL(MX51_AUDMUX_PORT3) | + IMX_AUDMUX_V2_PTCR_SYN | + IMX_AUDMUX_V2_PTCR_TFSDIR | + IMX_AUDMUX_V2_PTCR_TCLKDIR) + IMX_AUDMUX_V2_PDCR_RXDSEL(MX51_AUDMUX_PORT3) + >; + }; + + audmux_adu3 { + fsl,audmux-port = <MX51_AUDMUX_PORT3>; + fsl,port-config = < + IMX_AUDMUX_V2_PTCR_SYN + IMX_AUDMUX_V2_PDCR_RXDSEL(MX51_AUDMUX_PORT1_SSI0) + >; + }; + + audmux_ssi2 { + fsl,audmux-port = <MX51_AUDMUX_PORT2_SSI1>; + fsl,port-config = < + (IMX_AUDMUX_V2_PTCR_TFSEL(MX51_AUDMUX_PORT4) | + IMX_AUDMUX_V2_PTCR_TCSEL(MX51_AUDMUX_PORT4) | + IMX_AUDMUX_V2_PTCR_SYN | + IMX_AUDMUX_V2_PTCR_TFSDIR | + IMX_AUDMUX_V2_PTCR_TCLKDIR) + IMX_AUDMUX_V2_PDCR_RXDSEL(MX51_AUDMUX_PORT4) + >; + }; + + audmux_adu4 { + fsl,audmux-port = <MX51_AUDMUX_PORT4>; + fsl,port-config = < + IMX_AUDMUX_V2_PTCR_SYN + IMX_AUDMUX_V2_PDCR_RXDSEL(MX51_AUDMUX_PORT2_SSI1) + >; + }; +}; + +/* CAN0 */ +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; +}; + +/* CAN1 */ +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; +}; + +/* SPI1 */ +&ecspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>, + <&gpio2 27 GPIO_ACTIVE_HIGH>; +}; + +/* SPI0 */ +&ecspi4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi4>; + cs-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>, + <&gpio3 29 GPIO_ACTIVE_HIGH>; + status = "okay"; + + /* default boot source: workaround #1 for errata ERR006282 */ + smarc_flash: spi-flash@0 { + compatible = "winbond,w25q16dw", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <20000000>; + }; +}; + +/* GBE */ +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii"; + phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; +}; + +&i2c_intern { + pmic@8 { + compatible = "fsl,pfuze100"; + reg = <0x08>; + + regulators { + reg_v_core_s0: sw1ab { + regulator-name = "V_CORE_S0"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_vddsoc_s0: sw1c { + regulator-name = "V_VDDSOC_S0"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_3p15v_s0: sw2 { + regulator-name = "V_3V15_S0"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + /* sw3a/b is used in dual mode, but driver does not + * support it. Although, there's no need to control + * DDR power - so just leaving dummy entries for sw3a + * and sw3b for now. + */ + sw3a { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3b { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_1p8v_s0: sw4 { + regulator-name = "V_1V8_S0"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + /* Regulator for USB */ + reg_5p0v_s0: swbst { + regulator-name = "V_5V0_S0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + regulator-boot-on; + }; + + reg_vsnvs: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_vrefddr: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + /* + * Per schematics, of all VGEN's, only VGEN5 has some + * usage ... but even that - over DNI resistor + */ + vgen1 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + vgen4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + reg_2p5v_s0: vgen5 { + regulator-name = "V_2V5_S0"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + vgen6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + }; + }; +}; + +/* I2C_GP */ +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; +}; + +/* HDMI_CTRL */ +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; +}; + +/* I2C_PM */ +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + smarc_eeprom: eeprom@50 { + compatible = "atmel,24c32"; + reg = <0x50>; + pagesize = <32>; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mgmt_gpios &pinctrl_gpio>; + + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0 + MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x130b0 + MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0 + MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 + + MX6QDL_PAD_DISP0_DAT20__AUD4_TXC 0x130b0 + MX6QDL_PAD_DISP0_DAT21__AUD4_TXD 0x130b0 + MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS 0x130b0 + MX6QDL_PAD_DISP0_DAT23__AUD4_RXD 0x130b0 + + /* AUDIO MCLK */ + MX6QDL_PAD_NANDF_CS2__CCM_CLKO2 0x000b0 + >; + }; + + pinctrl_ecspi2: ecspi2grp { + fsl,pins = < + MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1 + MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1 + MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100b1 + + MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x1b0b0 /* CS0 */ + MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x1b0b0 /* CS1 */ + >; + }; + + pinctrl_ecspi4: ecspi4grp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1 + MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x100b1 + MX6QDL_PAD_EIM_D22__ECSPI4_MISO 0x100b1 + + /* SPI_IMX_CS2# - connected to internal flash */ + MX6QDL_PAD_EIM_D24__GPIO3_IO24 0x1b0b0 + /* SPI_IMX_CS0# - connected to SMARC SPI0_CS0# */ + MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1b0b0 + >; + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX6QDL_PAD_GPIO_7__FLEXCAN1_TX 0x1b0b0 + MX6QDL_PAD_GPIO_8__FLEXCAN1_RX 0x1b0b0 + >; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b0b0 + MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b0b0 + >; + }; + + pinctrl_gpio: gpiogrp { + fsl,pins = < + MX6QDL_PAD_EIM_DA0__GPIO3_IO00 0x1b0b0 /* GPIO0 / CAM0_PWR# */ + MX6QDL_PAD_EIM_DA1__GPIO3_IO01 0x1b0b0 /* GPIO1 / CAM1_PWR# */ + MX6QDL_PAD_EIM_DA2__GPIO3_IO02 0x1b0b0 /* GPIO2 / CAM0_RST# */ + MX6QDL_PAD_EIM_DA3__GPIO3_IO03 0x1b0b0 /* GPIO3 / CAM1_RST# */ + MX6QDL_PAD_EIM_DA4__GPIO3_IO04 0x1b0b0 /* GPIO4 / HDA_RST# */ + MX6QDL_PAD_EIM_DA5__GPIO3_IO05 0x1b0b0 /* GPIO5 / PWM_OUT */ + MX6QDL_PAD_EIM_DA6__GPIO3_IO06 0x1b0b0 /* GPIO6 / TACHIN */ + MX6QDL_PAD_EIM_DA7__GPIO3_IO07 0x1b0b0 /* GPIO7 / PCAM_FLD */ + MX6QDL_PAD_EIM_DA8__GPIO3_IO08 0x1b0b0 /* GPIO8 / CAN0_ERR# */ + MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x1b0b0 /* GPIO9 / CAN1_ERR# */ + MX6QDL_PAD_EIM_DA10__GPIO3_IO10 0x1b0b0 /* GPIO10 */ + MX6QDL_PAD_EIM_DA11__GPIO3_IO11 0x1b0b0 /* GPIO11 */ + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 + + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 + MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0 /* RST_GBE0_PHY# */ + >; + }; + + pinctrl_i2c_gpio_cam: i2c-gpiocamgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x1b0b0 /* SCL */ + MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0 /* SDA */ + >; + }; + + pinctrl_i2c_gpio_intern: i2c-gpiointerngrp { + fsl,pins = < + MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x1b0b0 /* SCL */ + MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 /* SDA */ + >; + }; + + pinctrl_i2c_gpio_lcd: i2c-gpiolcdgrp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT2__GPIO1_IO19 0x1b0b0 /* SCL */ + MX6QDL_PAD_SD1_DAT3__GPIO1_IO21 0x1b0b0 /* SDA */ + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_16__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_lcd: lcdgrp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x100f1 + MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x100f1 + MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x100f1 + MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x100f1 + MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x100f1 + MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x100f1 + MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x100f1 + MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x100f1 + MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x100f1 + MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x100f1 + MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x100f1 + MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x100f1 + MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x100f1 + MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x100f1 + MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x100f1 + MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x100f1 + MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x100f1 + MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x100f1 + MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x100f1 + MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x100f1 + MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x100f1 + MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x100f1 + MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x100f1 + MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x100f1 + + MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x100f1 + MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x100f1 /* DE */ + MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x100f1 /* HSYNC */ + MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x100f1 /* VSYNC */ + >; + }; + + pinctrl_lcdbklt_en: lcdbkltengrp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x1b0b1 + >; + }; + + pinctrl_lcdvdd_en: lcdvddengrp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x1b0b0 + >; + }; + + pinctrl_mipi_csi: mipi-csigrp { + fsl,pins = < + MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1 0x000b0 /* CSI0/1 MCLK */ + >; + }; + + pinctrl_mgmt_gpios: mgmt-gpiosgrp { + fsl,pins = < + MX6QDL_PAD_EIM_WAIT__GPIO5_IO00 0x1b0b0 /* LID# */ + MX6QDL_PAD_SD3_DAT7__GPIO6_IO17 0x1b0b0 /* SLEEP# */ + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0 /* CHARGING# */ + MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 /* CHARGER_PRSNT# */ + MX6QDL_PAD_SD1_CLK__GPIO1_IO20 0x1b0b0 /* CARRIER_STBY# */ + MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x1b0b0 /* BATLOW# */ + MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x1b0b0 /* TEST# */ + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0 /* VDD_IO_SEL_D# */ + MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x1b0b0 /* POWER_BTN# */ + >; + }; + + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6QDL_PAD_EIM_D18__GPIO3_IO18 0x1b0b0 /* PCI_A_PRSNT# */ + MX6QDL_PAD_EIM_DA13__GPIO3_IO13 0x1b0b0 /* RST_PCIE_A# */ + MX6QDL_PAD_SD3_DAT6__GPIO6_IO18 0x1b0b0 /* PCIE_WAKE# */ + >; + }; + + pinctrl_pwm4: pwm4grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D20__UART1_RTS_B 0x1b0b1 + MX6QDL_PAD_EIM_D19__UART1_CTS_B 0x1b0b1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1 + MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1 + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA 0x1b0b1 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x1f8b0 + /* power, oc muxed but not used by the driver */ + MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x1b0b0 /* USB power */ + MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x1b0b0 /* USB OC */ + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x17059 + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + + MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x1b0b0 /* CD */ + MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b0 /* WP */ + MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 /* PWR_EN */ + >; + }; + + pinctrl_usdhc4: usdhc4grp { + fsl,pins = < + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x17059 + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059 + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059 + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059 + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059 + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059 + MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059 + MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059 + MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059 + MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059 + >; + }; + + pinctrl_wdog1: wdog1rp { + fsl,pins = < + MX6QDL_PAD_GPIO_9__WDOG1_B 0x1b0b0 + >; + }; +}; + +&mipi_csi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mipi_csi>; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + wake-up-gpio = <&gpio6 18 GPIO_ACTIVE_HIGH>; + reset-gpio = <&gpio3 13 GPIO_ACTIVE_HIGH>; +}; + +/* LCD_BKLT_PWM */ +&pwm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm4>; +}; + +®_arm { + vin-supply = <®_v_core_s0>; +}; + +®_pu { + vin-supply = <®_vddsoc_s0>; +}; + +®_soc { + vin-supply = <®_vddsoc_s0>; +}; + +/* SER0 */ +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + uart-has-rtscts; +}; + +/* SER1 */ +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; +}; + +/* SER2 */ +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + uart-has-rtscts; +}; + +/* SER3 */ +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; +}; + +/* USB0 */ +&usbotg { + /* + * no 'imx6-usb-charger-detection' + * since USB_OTG_CHD_B pin is not wired + */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; +}; + +/* USB1/2 via hub */ +&usbh1 { + vbus-supply = <®_5p0v_s0>; +}; + +/* SDIO */ +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>; + no-1-8-v; +}; + +/* SDMMC */ +&usdhc4 { + /* Internal eMMC, optional on some boards */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc4>; + bus-width = <8>; + no-sdio; + no-sd; + non-removable; + vmmc-supply = <®_3p3v_s0>; + vqmmc-supply = <®_1p8v_s0>; +}; + +&wdog1 { + /* CPLD is feeded by watchdog (hardwired) */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog1>; + status = "okay"; +}; diff --git a/dts/src/arm/imx6qdl-sabresd.dtsi b/dts/src/arm/imx6qdl-sabresd.dtsi index 185fb17a35..71ca76a5e4 100644 --- a/dts/src/arm/imx6qdl-sabresd.dtsi +++ b/dts/src/arm/imx6qdl-sabresd.dtsi @@ -745,10 +745,26 @@ vin-supply = <&sw1c_reg>; }; +®_vdd1p1 { + vin-supply = <&vgen5_reg>; +}; + +®_vdd3p0 { + vin-supply = <&sw2_reg>; +}; + +®_vdd2p5 { + vin-supply = <&vgen5_reg>; +}; + &snvs_poweroff { status = "okay"; }; +&snvs_pwrkey { + status = "okay"; +}; + &ssi2 { status = "okay"; }; diff --git a/dts/src/arm/imx6qdl.dtsi b/dts/src/arm/imx6qdl.dtsi index b3a77bcf00..4b801935ca 100644 --- a/dts/src/arm/imx6qdl.dtsi +++ b/dts/src/arm/imx6qdl.dtsi @@ -675,14 +675,14 @@ compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt"; reg = <0x020bc000 0x4000>; interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6QDL_CLK_DUMMY>; + clocks = <&clks IMX6QDL_CLK_IPG>; }; wdog2: wdog@20c0000 { compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt"; reg = <0x020c0000 0x4000>; interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6QDL_CLK_DUMMY>; + clocks = <&clks IMX6QDL_CLK_IPG>; status = "disabled"; }; @@ -701,7 +701,7 @@ <0 54 IRQ_TYPE_LEVEL_HIGH>, <0 127 IRQ_TYPE_LEVEL_HIGH>; - regulator-1p1 { + reg_vdd1p1: regulator-1p1 { compatible = "fsl,anatop-regulator"; regulator-name = "vdd1p1"; regulator-min-microvolt = <1000000>; @@ -716,7 +716,7 @@ anatop-enable-bit = <0>; }; - regulator-3p0 { + reg_vdd3p0: regulator-3p0 { compatible = "fsl,anatop-regulator"; regulator-name = "vdd3p0"; regulator-min-microvolt = <2800000>; @@ -731,7 +731,7 @@ anatop-enable-bit = <0>; }; - regulator-2p5 { + reg_vdd2p5: regulator-2p5 { compatible = "fsl,anatop-regulator"; regulator-name = "vdd2p5"; regulator-min-microvolt = <2250000>; @@ -841,6 +841,7 @@ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; linux,keycode = <KEY_POWER>; wakeup-source; + status = "disabled"; }; snvs_lpgpr: snvs-lpgpr { diff --git a/dts/src/arm/imx6sl-evk.dts b/dts/src/arm/imx6sl-evk.dts index f7a48e4622..4829aa682a 100644 --- a/dts/src/arm/imx6sl-evk.dts +++ b/dts/src/arm/imx6sl-evk.dts @@ -580,6 +580,18 @@ status = "okay"; }; +®_vdd1p1 { + vin-supply = <&sw2_reg>; +}; + +®_vdd3p0 { + vin-supply = <&sw2_reg>; +}; + +®_vdd2p5 { + vin-supply = <&sw2_reg>; +}; + &snvs_poweroff { status = "okay"; }; diff --git a/dts/src/arm/imx6sl.dtsi b/dts/src/arm/imx6sl.dtsi index 9ddbeea64b..b36fc012ff 100644 --- a/dts/src/arm/imx6sl.dtsi +++ b/dts/src/arm/imx6sl.dtsi @@ -495,7 +495,7 @@ compatible = "fsl,imx6sl-kpp", "fsl,imx21-kpp"; reg = <0x020b8000 0x4000>; interrupts = <0 82 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6SL_CLK_DUMMY>; + clocks = <&clks IMX6SL_CLK_IPG>; status = "disabled"; }; @@ -503,14 +503,14 @@ compatible = "fsl,imx6sl-wdt", "fsl,imx21-wdt"; reg = <0x020bc000 0x4000>; interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6SL_CLK_DUMMY>; + clocks = <&clks IMX6SL_CLK_IPG>; }; wdog2: wdog@20c0000 { compatible = "fsl,imx6sl-wdt", "fsl,imx21-wdt"; reg = <0x020c0000 0x4000>; interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6SL_CLK_DUMMY>; + clocks = <&clks IMX6SL_CLK_IPG>; status = "disabled"; }; @@ -531,7 +531,7 @@ <0 54 IRQ_TYPE_LEVEL_HIGH>, <0 127 IRQ_TYPE_LEVEL_HIGH>; - regulator-1p1 { + reg_vdd1p1: regulator-1p1 { compatible = "fsl,anatop-regulator"; regulator-name = "vdd1p1"; regulator-min-microvolt = <1000000>; @@ -546,7 +546,7 @@ anatop-enable-bit = <0>; }; - regulator-3p0 { + reg_vdd3p0: regulator-3p0 { compatible = "fsl,anatop-regulator"; regulator-name = "vdd3p0"; regulator-min-microvolt = <2800000>; @@ -561,7 +561,7 @@ anatop-enable-bit = <0>; }; - regulator-2p5 { + reg_vdd2p5: regulator-2p5 { compatible = "fsl,anatop-regulator"; regulator-name = "vdd2p5"; regulator-min-microvolt = <2250000>; diff --git a/dts/src/arm/imx6sll-evk.dts b/dts/src/arm/imx6sll-evk.dts index 4a31a415f8..3e1d32fdf4 100644 --- a/dts/src/arm/imx6sll-evk.dts +++ b/dts/src/arm/imx6sll-evk.dts @@ -265,6 +265,18 @@ status = "okay"; }; +®_3p0 { + vin-supply = <&sw2_reg>; +}; + +&snvs_poweroff { + status = "okay"; +}; + +&snvs_pwrkey { + status = "okay"; +}; + &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; diff --git a/dts/src/arm/imx6sll.dtsi b/dts/src/arm/imx6sll.dtsi index 1b4899f0fc..b0a77ff70b 100644 --- a/dts/src/arm/imx6sll.dtsi +++ b/dts/src/arm/imx6sll.dtsi @@ -568,6 +568,7 @@ regmap = <&snvs>; offset = <0x38>; mask = <0x61>; + status = "disabled"; }; snvs_pwrkey: snvs-powerkey { @@ -576,6 +577,7 @@ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; linux,keycode = <KEY_POWER>; wakeup-source; + status = "disabled"; }; }; diff --git a/dts/src/arm/imx6sx-sdb-reva.dts b/dts/src/arm/imx6sx-sdb-reva.dts index 00c4854823..f1830ed387 100644 --- a/dts/src/arm/imx6sx-sdb-reva.dts +++ b/dts/src/arm/imx6sx-sdb-reva.dts @@ -154,3 +154,19 @@ enable-active-high; vin-supply = <®_can_en>; }; + +®_vdd1p1 { + vin-supply = <&vgen6_reg>; +}; + +®_vdd3p0 { + vin-supply = <&sw2_reg>; +}; + +®_vdd2p5 { + vin-supply = <&vgen6_reg>; +}; + +&snvs_pwrkey { + status = "okay"; +}; diff --git a/dts/src/arm/imx6sx-sdb.dts b/dts/src/arm/imx6sx-sdb.dts index 998e3e13a0..a8ee7087af 100644 --- a/dts/src/arm/imx6sx-sdb.dts +++ b/dts/src/arm/imx6sx-sdb.dts @@ -137,7 +137,23 @@ vin-supply = <&sw1a_reg>; }; +®_vdd1p1 { + vin-supply = <&vgen6_reg>; +}; + +®_vdd3p0 { + vin-supply = <&sw2_reg>; +}; + +®_vdd2p5 { + vin-supply = <&vgen6_reg>; +}; + ®_can_stby { /* Transceiver EN/STBY is active low on RevB board */ gpio = <&gpio4 27 GPIO_ACTIVE_LOW>; }; + +&snvs_pwrkey { + status = "okay"; +}; diff --git a/dts/src/arm/imx6sx-udoo-neo-basic.dts b/dts/src/arm/imx6sx-udoo-neo-basic.dts index db0feb9b9f..205ea26484 100644 --- a/dts/src/arm/imx6sx-udoo-neo-basic.dts +++ b/dts/src/arm/imx6sx-udoo-neo-basic.dts @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2016 Andreas Färber - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/dts/src/arm/imx6sx-udoo-neo-extended.dts b/dts/src/arm/imx6sx-udoo-neo-extended.dts index 5c7a2bb914..5817b49853 100644 --- a/dts/src/arm/imx6sx-udoo-neo-extended.dts +++ b/dts/src/arm/imx6sx-udoo-neo-extended.dts @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2016 Andreas Färber - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; @@ -53,3 +16,11 @@ reg = <0x80000000 0x40000000>; }; }; + +&i2c4 { /* Onboard Motion sensors */ + status = "okay"; +}; + +&uart3 { /* Bluetooth */ + status = "okay"; +}; diff --git a/dts/src/arm/imx6sx-udoo-neo-full.dts b/dts/src/arm/imx6sx-udoo-neo-full.dts index 13dfe2afab..96f4d89848 100644 --- a/dts/src/arm/imx6sx-udoo-neo-full.dts +++ b/dts/src/arm/imx6sx-udoo-neo-full.dts @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2016 Andreas Färber - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; @@ -68,3 +31,11 @@ }; }; }; + +&i2c4 { /* Onboard Motion sensors */ + status = "okay"; +}; + +&uart3 { /* Bluetooth */ + status = "okay"; +}; diff --git a/dts/src/arm/imx6sx-udoo-neo.dtsi b/dts/src/arm/imx6sx-udoo-neo.dtsi index 53b3eac94f..25d4aa985a 100644 --- a/dts/src/arm/imx6sx-udoo-neo.dtsi +++ b/dts/src/arm/imx6sx-udoo-neo.dtsi @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2016 Andreas Färber - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include "imx6sx.dtsi" @@ -107,18 +70,6 @@ startup-delay-us = <70000>; enable-active-high; }; - - reg_bt: regulator-bt { - compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_bt_reg>; - enable-active-high; - gpio = <&gpio2 17 GPIO_ACTIVE_HIGH>; - regulator-name = "bt_reg"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; }; &fec1 { @@ -225,6 +176,20 @@ }; }; +&i2c2 { /* Brick snap in sensors connector */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + clock-frequency = <100000>; + status = "okay"; +}; + +&i2c4 { /* Onboard Motion sensors */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; + clock-frequency = <100000>; + status = "disabled"; +}; + &iomuxc { pinctrl_bt_reg: btreggrp { fsl,pins = @@ -256,6 +221,18 @@ <MX6SX_PAD_GPIO1_IO01__I2C1_SDA 0x4001b8b1>; }; + pinctrl_i2c2: i2c2grp { + fsl,pins = + <MX6SX_PAD_GPIO1_IO03__I2C2_SDA 0x4001b8b1>, + <MX6SX_PAD_GPIO1_IO02__I2C2_SCL 0x4001b8b1>; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = + <MX6SX_PAD_USB_H_DATA__I2C4_SDA 0x4001b8b1>, + <MX6SX_PAD_USB_H_STROBE__I2C4_SCL 0x4001b8b1>; + }; + pinctrl_uart1: uart1grp { fsl,pins = <MX6SX_PAD_GPIO1_IO04__UART1_TX 0x1b0b1>, @@ -354,11 +331,19 @@ status = "disabled"; }; -&uart3 { /* Bluetooth */ +&uart3 { /* Bluetooth - only on Extended/Full versions */ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>; uart-has-rtscts; - status = "okay"; + status = "disabled"; + + bluetooth { + compatible = "ti,wl1831-st"; + enable-gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_bt_reg>; + max-speed = <921600>; + }; }; /* Arduino serial */ diff --git a/dts/src/arm/imx6sx.dtsi b/dts/src/arm/imx6sx.dtsi index b16a123990..bb25add90f 100644 --- a/dts/src/arm/imx6sx.dtsi +++ b/dts/src/arm/imx6sx.dtsi @@ -600,7 +600,7 @@ <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; - regulator-1p1 { + reg_vdd1p1: regulator-1p1 { compatible = "fsl,anatop-regulator"; regulator-name = "vdd1p1"; regulator-min-microvolt = <1000000>; @@ -615,7 +615,7 @@ anatop-enable-bit = <0>; }; - regulator-3p0 { + reg_vdd3p0: regulator-3p0 { compatible = "fsl,anatop-regulator"; regulator-name = "vdd3p0"; regulator-min-microvolt = <2800000>; @@ -630,7 +630,7 @@ anatop-enable-bit = <0>; }; - regulator-2p5 { + reg_vdd2p5: regulator-2p5 { compatible = "fsl,anatop-regulator"; regulator-name = "vdd2p5"; regulator-min-microvolt = <2250000>; @@ -738,6 +738,7 @@ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; linux,keycode = <KEY_POWER>; wakeup-source; + status = "disabled"; }; }; diff --git a/dts/src/arm/imx6ul-14x14-evk.dtsi b/dts/src/arm/imx6ul-14x14-evk.dtsi index 9207d5d071..c2a9dd57e5 100644 --- a/dts/src/arm/imx6ul-14x14-evk.dtsi +++ b/dts/src/arm/imx6ul-14x14-evk.dtsi @@ -112,7 +112,7 @@ }; &i2c2 { - clock_frequency = <100000>; + clock-frequency = <100000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; @@ -238,6 +238,10 @@ status = "okay"; }; +&snvs_pwrkey { + status = "okay"; +}; + &tsc { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_tsc>; diff --git a/dts/src/arm/imx6ul-geam.dts b/dts/src/arm/imx6ul-geam.dts index bc77f26a2f..9f63706383 100644 --- a/dts/src/arm/imx6ul-geam.dts +++ b/dts/src/arm/imx6ul-geam.dts @@ -156,7 +156,7 @@ }; &i2c2 { - clock_frequency = <100000>; + clock-frequency = <100000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; @@ -169,7 +169,7 @@ display = <&display0>; status = "okay"; - display0: display { + display0: display0 { bits-per-pixel = <16>; bus-width = <18>; diff --git a/dts/src/arm/imx6ul-isiot.dtsi b/dts/src/arm/imx6ul-isiot.dtsi index 213e802bf3..cc9adce638 100644 --- a/dts/src/arm/imx6ul-isiot.dtsi +++ b/dts/src/arm/imx6ul-isiot.dtsi @@ -148,7 +148,7 @@ }; &i2c2 { - clock_frequency = <100000>; + clock-frequency = <100000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; @@ -161,7 +161,7 @@ display = <&display0>; status = "okay"; - display0: display { + display0: display0 { bits-per-pixel = <16>; bus-width = <18>; diff --git a/dts/src/arm/imx6ul-pico-hobbit.dts b/dts/src/arm/imx6ul-pico-hobbit.dts index 39eeeddac3..09f7ffa9ad 100644 --- a/dts/src/arm/imx6ul-pico-hobbit.dts +++ b/dts/src/arm/imx6ul-pico-hobbit.dts @@ -43,7 +43,7 @@ }; &i2c2 { - clock_frequency = <100000>; + clock-frequency = <100000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; diff --git a/dts/src/arm/imx6ul-pico-pi.dts b/dts/src/arm/imx6ul-pico-pi.dts index de07357b27..6cd7d5877d 100644 --- a/dts/src/arm/imx6ul-pico-pi.dts +++ b/dts/src/arm/imx6ul-pico-pi.dts @@ -43,7 +43,7 @@ }; &i2c2 { - clock_frequency = <100000>; + clock-frequency = <100000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; @@ -58,7 +58,7 @@ }; &i2c3 { - clock_frequency = <100000>; + clock-frequency = <100000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c3>; status = "okay"; diff --git a/dts/src/arm/imx6ul.dtsi b/dts/src/arm/imx6ul.dtsi index bbf010c733..81d4b49251 100644 --- a/dts/src/arm/imx6ul.dtsi +++ b/dts/src/arm/imx6ul.dtsi @@ -59,6 +59,7 @@ compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <0>; + clock-frequency = <696000000>; clock-latency = <61036>; /* two CLK32 periods */ #cooling-cells = <2>; operating-points = < @@ -358,7 +359,7 @@ pwm1: pwm@2080000 { compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm"; reg = <0x02080000 0x4000>; - interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6UL_CLK_PWM1>, <&clks IMX6UL_CLK_PWM1>; clock-names = "ipg", "per"; @@ -369,7 +370,7 @@ pwm2: pwm@2084000 { compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm"; reg = <0x02084000 0x4000>; - interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6UL_CLK_PWM2>, <&clks IMX6UL_CLK_PWM2>; clock-names = "ipg", "per"; @@ -380,7 +381,7 @@ pwm3: pwm@2088000 { compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm"; reg = <0x02088000 0x4000>; - interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6UL_CLK_PWM3>, <&clks IMX6UL_CLK_PWM3>; clock-names = "ipg", "per"; @@ -391,7 +392,7 @@ pwm4: pwm@208c000 { compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm"; reg = <0x0208c000 0x4000>; - interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6UL_CLK_PWM4>, <&clks IMX6UL_CLK_PWM4>; clock-names = "ipg", "per"; @@ -649,6 +650,7 @@ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; linux,keycode = <KEY_POWER>; wakeup-source; + status = "disabled"; }; snvs_lpgpr: snvs-lpgpr { @@ -856,6 +858,8 @@ <&clks IMX6UL_CLK_USDHC1>, <&clks IMX6UL_CLK_USDHC1>; clock-names = "ipg", "ahb", "per"; + fsl,tuning-step= <2>; + fsl,tuning-start-tap = <20>; bus-width = <4>; status = "disabled"; }; @@ -869,6 +873,8 @@ <&clks IMX6UL_CLK_USDHC2>; clock-names = "ipg", "ahb", "per"; bus-width = <4>; + fsl,tuning-step= <2>; + fsl,tuning-start-tap = <20>; status = "disabled"; }; @@ -962,6 +968,14 @@ status = "disabled"; }; + pxp: pxp@21cc000 { + compatible = "fsl,imx6ul-pxp"; + reg = <0x021cc000 0x4000>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_PXP>; + clock-names = "axi"; + }; + qspi: spi@21e0000 { #address-cells = <1>; #size-cells = <0>; diff --git a/dts/src/arm/imx6ull-colibri-eval-v3.dtsi b/dts/src/arm/imx6ull-colibri-eval-v3.dtsi index 006690ea98..b6147c76d1 100644 --- a/dts/src/arm/imx6ull-colibri-eval-v3.dtsi +++ b/dts/src/arm/imx6ull-colibri-eval-v3.dtsi @@ -145,13 +145,20 @@ }; &usdhc1 { - pinctrl-names = "default"; + pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_snvs_usdhc1_cd>; - no-1-8-v; + pinctrl-1 = <&pinctrl_usdhc1_100mhz &pinctrl_snvs_usdhc1_cd>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz &pinctrl_snvs_usdhc1_cd>; + pinctrl-3 = <&pinctrl_usdhc1 &pinctrl_snvs_usdhc1_sleep_cd>; cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; disable-wp; wakeup-source; keep-power-in-suspend; vmmc-supply = <®_3v3>; + vqmmc-supply = <®_sd1_vmmc>; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-sdr104; status = "okay"; }; diff --git a/dts/src/arm/imx6ull-colibri.dtsi b/dts/src/arm/imx6ull-colibri.dtsi index 9ad1da1597..d56728f03c 100644 --- a/dts/src/arm/imx6ull-colibri.dtsi +++ b/dts/src/arm/imx6ull-colibri.dtsi @@ -545,6 +545,12 @@ >; }; + pinctrl_snvs_usdhc1_sleep_cd: snvs-usdhc1-cd-grp-slp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x0 + >; + }; + pinctrl_snvs_wifi_pdn: snvs-wifi-pdn-grp { fsl,pins = < MX6ULL_PAD_BOOT_MODE1__GPIO5_IO11 0x14 diff --git a/dts/src/arm/imx6ull.dtsi b/dts/src/arm/imx6ull.dtsi index 22e4a307fa..b7e67d1213 100644 --- a/dts/src/arm/imx6ull.dtsi +++ b/dts/src/arm/imx6ull.dtsi @@ -12,6 +12,7 @@ /delete-node/ &crypto; &cpu0 { + clock-frequency = <900000000>; operating-points = < /* kHz uV */ 900000 1275000 @@ -34,6 +35,12 @@ compatible = "fsl,imx6ull-ocotp", "syscon"; }; +&pxp { + compatible = "fsl,imx6ull-pxp"; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; +}; + &usdhc1 { compatible = "fsl,imx6ull-usdhc", "fsl,imx6sx-usdhc"; }; diff --git a/dts/src/arm/imx7d-meerkat96.dts b/dts/src/arm/imx7d-meerkat96.dts new file mode 100644 index 0000000000..5339210b63 --- /dev/null +++ b/dts/src/arm/imx7d-meerkat96.dts @@ -0,0 +1,375 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Copyright (C) 2019 Linaro Ltd. + */ + +/dts-v1/; + +#include "imx7d.dtsi" + +/ { + model = "96Boards Meerkat96 Board"; + compatible = "novtech,imx7d-meerkat96", "fsl,imx7d"; + + chosen { + stdout-path = &uart6; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x20000000>; /* 512MB */ + }; + + reg_wlreg_on: regulator-wlreg-on { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wlreg_on>; + regulator-name = "wlreg_on"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <100>; + gpio = <&gpio6 15 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_usb_otg1_vbus: regulator-usb-otg1-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_usb_otg2_vbus: regulator-usb-otg2-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg2_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; + + led1 { + label = "green:user1"; + gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + + led2 { + label = "green:user2"; + gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; + linux,default-trigger = "mmc0"; + default-state = "off"; + }; + + led3 { + label = "green:user3"; + gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; + linux,default-trigger = "mmc1"; + default-state = "off"; + }; + + led4 { + label = "green:user4"; + gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; + linux,default-trigger = "none"; + default-state = "off"; + panic-indicator; + }; + + led5 { + label = "yellow:wlan"; + gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy0tx"; + default-state = "off"; + }; + + led6 { + label = "blue:bt"; + gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "bluetooth-power"; + default-state = "off"; + }; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; +}; + +&i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; + status = "okay"; +}; + +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcdif>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>; + assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + assigned-clocks = <&clks IMX7D_UART3_ROOT_SRC>; + assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>; + uart-has-rtscts; + status = "okay"; +}; + +&uart6 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart6>; + assigned-clocks = <&clks IMX7D_UART6_ROOT_SRC>; + assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>; + status = "okay"; +}; + +&uart7 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart7 &pinctrl_bt_gpios>; + assigned-clocks = <&clks IMX7D_UART7_ROOT_SRC>; + assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>; + uart-has-rtscts; + fsl,dte-mode; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + device-wakeup-gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpio4 17 GPIO_ACTIVE_HIGH>; + }; +}; + +&usbotg1 { + vbus-supply = <®_usb_otg1_vbus>; + status = "okay"; +}; + +&usbotg2 { + vbus-supply = <®_usb_otg2_vbus>; + dr_mode = "host"; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + keep-power-in-suspend; + tuning-step = <2>; + vmmc-supply = <®_3p3v>; + no-1-8-v; + broken-cd; + status = "okay"; +}; + +&usdhc3 { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + bus-width = <4>; + no-1-8-v; + no-mmc; + non-removable; + keep-power-in-suspend; + wakeup-source; + vmmc-supply = <®_wlreg_on>; + vqmmc-supply =<®_3p3v>; + status = "okay"; + + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wlan_irq>; + interrupt-parent = <&gpio6>; + interrupts = <14 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host-wake"; + }; +}; + +&iomuxc { + pinctrl_bt_gpios: btgpiosgrp { + fsl,pins = < + MX7D_PAD_SAI1_TX_BCLK__GPIO6_IO13 0x59 + MX7D_PAD_ECSPI1_MOSI__GPIO4_IO17 0x1f + >; + }; + + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX7D_PAD_LPSR_GPIO1_IO00__GPIO1_IO0 0x59 + MX7D_PAD_LPSR_GPIO1_IO04__GPIO1_IO4 0x59 + MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5 0x59 + MX7D_PAD_LPSR_GPIO1_IO06__GPIO1_IO6 0x59 + MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7 0x59 + MX7D_PAD_SD1_RESET_B__GPIO5_IO2 0x59 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX7D_PAD_I2C1_SDA__I2C1_SDA 0x4000007f + MX7D_PAD_I2C1_SCL__I2C1_SCL 0x4000007f + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX7D_PAD_I2C2_SDA__I2C2_SDA 0x4000007f + MX7D_PAD_I2C2_SCL__I2C2_SCL 0x4000007f + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX7D_PAD_ENET1_RGMII_RD1__I2C3_SDA 0x4000007f + MX7D_PAD_ENET1_RGMII_RD0__I2C3_SCL 0x4000007f + >; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX7D_PAD_SAI1_RX_BCLK__I2C4_SDA 0x4000007f + MX7D_PAD_SAI1_RX_SYNC__I2C4_SCL 0x4000007f + >; + }; + + pinctrl_lcdif: lcdifgrp { + fsl,pins = < + MX7D_PAD_LCD_DATA00__LCD_DATA0 0x79 + MX7D_PAD_LCD_DATA01__LCD_DATA1 0x79 + MX7D_PAD_LCD_DATA02__LCD_DATA2 0x79 + MX7D_PAD_LCD_DATA03__LCD_DATA3 0x79 + MX7D_PAD_LCD_DATA04__LCD_DATA4 0x79 + MX7D_PAD_LCD_DATA05__LCD_DATA5 0x79 + MX7D_PAD_LCD_DATA06__LCD_DATA6 0x79 + MX7D_PAD_LCD_DATA07__LCD_DATA7 0x79 + MX7D_PAD_LCD_DATA08__LCD_DATA8 0x79 + MX7D_PAD_LCD_DATA09__LCD_DATA9 0x79 + MX7D_PAD_LCD_DATA10__LCD_DATA10 0x79 + MX7D_PAD_LCD_DATA11__LCD_DATA11 0x79 + MX7D_PAD_LCD_DATA12__LCD_DATA12 0x79 + MX7D_PAD_LCD_DATA13__LCD_DATA13 0x79 + MX7D_PAD_LCD_DATA14__LCD_DATA14 0x79 + MX7D_PAD_LCD_DATA15__LCD_DATA15 0x79 + MX7D_PAD_LCD_DATA16__LCD_DATA16 0x79 + MX7D_PAD_LCD_DATA17__LCD_DATA17 0x79 + MX7D_PAD_LCD_DATA18__LCD_DATA18 0x79 + MX7D_PAD_LCD_DATA19__LCD_DATA19 0x79 + MX7D_PAD_LCD_DATA20__LCD_DATA20 0x79 + MX7D_PAD_LCD_DATA21__LCD_DATA21 0x79 + MX7D_PAD_LCD_DATA22__LCD_DATA22 0x79 + MX7D_PAD_LCD_DATA23__LCD_DATA23 0x79 + MX7D_PAD_LCD_CLK__LCD_CLK 0x79 + MX7D_PAD_LCD_ENABLE__LCD_ENABLE 0x79 + MX7D_PAD_LCD_VSYNC__LCD_VSYNC 0x79 + MX7D_PAD_LCD_HSYNC__LCD_HSYNC 0x79 + MX7D_PAD_LCD_RESET__LCD_RESET 0x79 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x79 + MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX 0x79 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX7D_PAD_SD3_DATA4__UART3_DCE_RX 0x79 + MX7D_PAD_SD3_DATA5__UART3_DCE_TX 0x79 + MX7D_PAD_SD3_DATA6__UART3_DCE_RTS 0x79 + MX7D_PAD_SD3_DATA7__UART3_DCE_CTS 0x79 + >; + }; + + pinctrl_uart6: uart6grp { + fsl,pins = < + MX7D_PAD_SD1_CD_B__UART6_DCE_RX 0x79 + MX7D_PAD_SD1_WP__UART6_DCE_TX 0x79 + >; + }; + + pinctrl_uart7: uart7grp { + fsl,pins = < + MX7D_PAD_ECSPI2_SCLK__UART7_DTE_TX 0x79 + MX7D_PAD_ECSPI2_MOSI__UART7_DTE_RX 0x79 + MX7D_PAD_ECSPI2_MISO__UART7_DTE_CTS 0x79 + MX7D_PAD_ECSPI2_SS0__UART7_DTE_RTS 0x79 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX7D_PAD_SD1_CMD__SD1_CMD 0x59 + MX7D_PAD_SD1_CLK__SD1_CLK 0x19 + MX7D_PAD_SD1_DATA0__SD1_DATA0 0x59 + MX7D_PAD_SD1_DATA1__SD1_DATA1 0x59 + MX7D_PAD_SD1_DATA2__SD1_DATA2 0x59 + MX7D_PAD_SD1_DATA3__SD1_DATA3 0x59 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX7D_PAD_SD3_CMD__SD3_CMD 0x59 + MX7D_PAD_SD3_CLK__SD3_CLK 0x0D + MX7D_PAD_SD3_DATA0__SD3_DATA0 0x59 + MX7D_PAD_SD3_DATA1__SD3_DATA1 0x59 + MX7D_PAD_SD3_DATA2__SD3_DATA2 0x59 + MX7D_PAD_SD3_DATA3__SD3_DATA3 0x59 + >; + }; + + pinctrl_wlan_irq: wlanirqgrp { + fsl,pins = < + MX7D_PAD_SAI1_TX_SYNC__GPIO6_IO14 0x19 + >; + }; + + pinctrl_wlreg_on: wlregongrp { + fsl,pins = < + MX7D_PAD_SAI1_TX_DATA__GPIO6_IO15 0x19 + >; + }; +}; diff --git a/dts/src/arm/imx7d-sdb.dts b/dts/src/arm/imx7d-sdb.dts index 202922ed37..869efbc4af 100644 --- a/dts/src/arm/imx7d-sdb.dts +++ b/dts/src/arm/imx7d-sdb.dts @@ -263,8 +263,8 @@ }; sw2_reg: sw2 { - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1850000>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; regulator-boot-on; regulator-always-on; }; @@ -379,6 +379,18 @@ status = "okay"; }; +®_1p0d { + vin-supply = <&sw2_reg>; +}; + +®_1p2 { + vin-supply = <&sw2_reg>; +}; + +&snvs_pwrkey { + status = "okay"; +}; + &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; diff --git a/dts/src/arm/imx7d-zii-rpu2.dts b/dts/src/arm/imx7d-zii-rpu2.dts index 3e467a94e8..4a78ddc751 100644 --- a/dts/src/arm/imx7d-zii-rpu2.dts +++ b/dts/src/arm/imx7d-zii-rpu2.dts @@ -16,7 +16,7 @@ compatible = "zii,imx7d-rpu2", "fsl,imx7d"; chosen { - stdout-path = &uart1; + stdout-path = &uart2; }; cs2000_ref: oscillator { @@ -775,13 +775,6 @@ >; }; - pinctrl_i2c1_gpio: i2c1gpiogrp { - fsl,pins = < - MX7D_PAD_I2C1_SDA__GPIO4_IO9 0x4000007f - MX7D_PAD_I2C1_SCL__GPIO4_IO8 0x4000007f - >; - }; - pinctrl_i2c2: i2c2grp { fsl,pins = < MX7D_PAD_I2C2_SDA__I2C2_SDA 0x4000007f @@ -789,13 +782,6 @@ >; }; - pinctrl_i2c2_gpio: i2c2gpiogrp { - fsl,pins = < - MX7D_PAD_I2C2_SDA__GPIO4_IO11 0x4000007f - MX7D_PAD_I2C2_SCL__GPIO4_IO10 0x4000007f - >; - }; - pinctrl_i2c3: i2c3grp { fsl,pins = < MX7D_PAD_I2C3_SDA__I2C3_SDA 0x4000007f diff --git a/dts/src/arm/imx7d.dtsi b/dts/src/arm/imx7d.dtsi index f33b560821..42528d2812 100644 --- a/dts/src/arm/imx7d.dtsi +++ b/dts/src/arm/imx7d.dtsi @@ -12,6 +12,8 @@ clock-frequency = <996000000>; operating-points-v2 = <&cpu0_opp_table>; #cooling-cells = <2>; + nvmem-cells = <&cpu_speed_grade>; + nvmem-cell-names = "speed_grade"; }; cpu1: cpu@1 { @@ -39,15 +41,23 @@ opp-792000000 { opp-hz = /bits/ 64 <792000000>; - opp-microvolt = <975000>; + opp-microvolt = <1000000>; clock-latency-ns = <150000>; + opp-supported-hw = <0xf>, <0xf>; }; opp-996000000 { opp-hz = /bits/ 64 <996000000>; - opp-microvolt = <1075000>; + opp-microvolt = <1100000>; clock-latency-ns = <150000>; - opp-suspend; + opp-supported-hw = <0xc>, <0xf>; + }; + + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <1225000>; + clock-latency-ns = <150000>; + opp-supported-hw = <0x8>, <0xf>; }; }; diff --git a/dts/src/arm/imx7s.dtsi b/dts/src/arm/imx7s.dtsi index 106711d2c0..c1a4fff5ce 100644 --- a/dts/src/arm/imx7s.dtsi +++ b/dts/src/arm/imx7s.dtsi @@ -117,7 +117,7 @@ * non-configurable replicators don't show up on the * AMBA bus. As such no need to add "arm,primecell" */ - compatible = "arm,coresight-replicator"; + compatible = "arm,coresight-static-replicator"; out-ports { #address-cells = <1>; @@ -175,7 +175,7 @@ ranges; funnel@30041000 { - compatible = "arm,coresight-funnel", "arm,primecell"; + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0x30041000 0x1000>; clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; clock-names = "apb_pclk"; @@ -217,7 +217,7 @@ }; funnel@30083000 { - compatible = "arm,coresight-funnel", "arm,primecell"; + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0x30083000 0x1000>; clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; clock-names = "apb_pclk"; @@ -551,6 +551,10 @@ tempmon_temp_grade: temp-grade@10 { reg = <0x10 0x4>; }; + + cpu_speed_grade: speed-grade@10 { + reg = <0x10 0x4>; + }; }; anatop: anatop@30360000 { @@ -609,6 +613,7 @@ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; linux,keycode = <KEY_POWER>; wakeup-source; + status = "disabled"; }; }; diff --git a/dts/src/arm/imx7ulp-evk.dts b/dts/src/arm/imx7ulp-evk.dts index a09026a6d2..4245b33bb4 100644 --- a/dts/src/arm/imx7ulp-evk.dts +++ b/dts/src/arm/imx7ulp-evk.dts @@ -22,6 +22,25 @@ reg = <0x60000000 0x40000000>; }; + backlight { + compatible = "pwm-backlight"; + pwms = <&tpm4 1 50000 0>; + brightness-levels = <0 20 25 30 35 40 100>; + default-brightness-level = <6>; + status = "okay"; + }; + + reg_usb_otg1_vbus: regulator-usb-otg1-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg1_vbus>; + regulator-name = "usb_otg1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio_ptc 0 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + reg_vsd_3v3: regulator-vsd-3v3 { compatible = "regulator-fixed"; regulator-name = "VSD_3V3"; @@ -40,6 +59,23 @@ status = "okay"; }; +&tpm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0>; + status = "okay"; +}; + +&usbotg1 { + vbus-supply = <®_usb_otg1_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg1_id>; + srp-disable; + hnp-disable; + adp-disable; + over-current-active-low; + status = "okay"; +}; + &usdhc0 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc0>; @@ -57,6 +93,25 @@ bias-pull-up; }; + pinctrl_pwm0: pwm0grp { + fsl,pins = < + IMX7ULP_PAD_PTF2__TPM4_CH1 0x2 + >; + }; + + pinctrl_usbotg1_vbus: otg1vbusgrp { + fsl,pins = < + IMX7ULP_PAD_PTC0__PTC0 0x20000 + >; + }; + + pinctrl_usbotg1_id: otg1idgrp { + fsl,pins = < + IMX7ULP_PAD_PTC13__USB0_ID 0x10003 + IMX7ULP_PAD_PTC16__USB1_OC2 0x10003 + >; + }; + pinctrl_usdhc0: usdhc0grp { fsl,pins = < IMX7ULP_PAD_PTD1__SDHC0_CMD 0x43 diff --git a/dts/src/arm/imx7ulp.dtsi b/dts/src/arm/imx7ulp.dtsi index d6b711011c..56907bb4b3 100644 --- a/dts/src/arm/imx7ulp.dtsi +++ b/dts/src/arm/imx7ulp.dtsi @@ -30,6 +30,7 @@ serial1 = &lpuart5; serial2 = &lpuart6; serial3 = &lpuart7; + usbphy0 = &usbphy1; }; cpus { @@ -100,6 +101,29 @@ reg = <0x40000000 0x800000>; ranges; + crypto: crypto@40240000 { + compatible = "fsl,sec-v4.0"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x40240000 0x10000>; + ranges = <0 0x40240000 0x10000>; + clocks = <&pcc2 IMX7ULP_CLK_CAAM>, + <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>; + clock-names = "aclk", "ipg"; + + sec_jr0: jr0@1000 { + compatible = "fsl,sec-v4.0-job-ring"; + reg = <0x1000 0x1000>; + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; + }; + + sec_jr1: jr1@2000 { + compatible = "fsl,sec-v4.0-job-ring"; + reg = <0x2000 0x1000>; + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + lpuart4: serial@402d0000 { compatible = "fsl,imx7ulp-lpuart"; reg = <0x402d0000 0x1000>; @@ -124,6 +148,16 @@ status = "disabled"; }; + tpm4: pwm@40250000 { + compatible = "fsl,imx7ulp-pwm"; + reg = <0x40250000 0x1000>; + assigned-clocks = <&pcc2 IMX7ULP_CLK_LPTPM4>; + assigned-clock-parents = <&scg1 IMX7ULP_CLK_SOSC_BUS_CLK>; + clocks = <&pcc2 IMX7ULP_CLK_LPTPM4>; + #pwm-cells = <3>; + status = "disabled"; + }; + tpm5: tpm@40260000 { compatible = "fsl,imx7ulp-tpm"; reg = <0x40260000 0x1000>; @@ -133,6 +167,33 @@ clock-names = "ipg", "per"; }; + usbotg1: usb@40330000 { + compatible = "fsl,imx7ulp-usb", "fsl,imx6ul-usb"; + reg = <0x40330000 0x200>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pcc2 IMX7ULP_CLK_USB0>; + phys = <&usbphy1>; + fsl,usbmisc = <&usbmisc1 0>; + ahb-burst-config = <0x0>; + tx-burst-size-dword = <0x8>; + rx-burst-size-dword = <0x8>; + status = "disabled"; + }; + + usbmisc1: usbmisc@40330200 { + compatible = "fsl,imx7ulp-usbmisc", "fsl,imx7d-usbmisc"; + #index-cells = <1>; + reg = <0x40330200 0x200>; + }; + + usbphy1: usb-phy@40350000 { + compatible = "fsl,imx7ulp-usbphy", "fsl,imx6ul-usbphy"; + reg = <0x40350000 0x1000>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pcc2 IMX7ULP_CLK_USB_PHY>; + #phy-cells = <0>; + }; + usdhc0: mmc@40370000 { compatible = "fsl,imx7ulp-usdhc", "fsl,imx6sx-usdhc"; reg = <0x40370000 0x10000>; diff --git a/dts/src/arm/integrator.dtsi b/dts/src/arm/integrator.dtsi index 1612a869a4..602f74d2c7 100644 --- a/dts/src/arm/integrator.dtsi +++ b/dts/src/arm/integrator.dtsi @@ -62,6 +62,9 @@ compatible = "arm,versatile-flash", "cfi-flash"; reg = <0x24000000 0x02000000>; bank-width = <4>; + partitions { + compatible = "arm,arm-firmware-suite"; + }; }; fpga { diff --git a/dts/src/arm/iwg20d-q7-common.dtsi b/dts/src/arm/iwg20d-q7-common.dtsi index e2b1ab9b56..ae75a1db3d 100644 --- a/dts/src/arm/iwg20d-q7-common.dtsi +++ b/dts/src/arm/iwg20d-q7-common.dtsi @@ -87,7 +87,7 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; - gpios = <&gpio2 30 GPIO_ACTIVE_LOW>; + gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>; gpios-states = <1>; states = <3300000 1 1800000 0>; diff --git a/dts/src/arm/logicpd-torpedo-37xx-devkit-28.dts b/dts/src/arm/logicpd-torpedo-37xx-devkit-28.dts new file mode 100644 index 0000000000..07ac99b9cd --- /dev/null +++ b/dts/src/arm/logicpd-torpedo-37xx-devkit-28.dts @@ -0,0 +1,32 @@ +// SPDX-License-Identifier: GPL-2.0 + +/dts-v1/; + +/* + * There are two types of 4.3" LCD, Type 15 and Type 28. + * By default, type 15 was used. This device tree file + * uses the timing for the type 28 LCD + */ + +#include "logicpd-torpedo-37xx-devkit.dts" + +&lcd0 { + + label = "28"; + + panel-timing { + clock-frequency = <9000000>; + hactive = <480>; + vactive = <272>; + hfront-porch = <3>; + hback-porch = <2>; + hsync-len = <42>; + vback-porch = <3>; + vfront-porch = <2>; + vsync-len = <11>; + hsync-active = <1>; + vsync-active = <1>; + de-active = <1>; + pixelclk-active = <0>; + }; +}; diff --git a/dts/src/arm/ls1021a-tsn.dts b/dts/src/arm/ls1021a-tsn.dts new file mode 100644 index 0000000000..5b7689094b --- /dev/null +++ b/dts/src/arm/ls1021a-tsn.dts @@ -0,0 +1,289 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright 2016-2018 NXP Semiconductors + * Copyright 2019 Vladimir Oltean <olteanv@gmail.com> + */ + +/dts-v1/; +#include "ls1021a.dtsi" + +/ { + model = "NXP LS1021A-TSN Board"; + + sys_mclk: clock-mclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24576000>; + }; + + reg_vdda_codec: regulator-3V3 { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_vddio_codec: regulator-2V5 { + compatible = "regulator-fixed"; + regulator-name = "2P5V"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; +}; + +&dspi0 { + bus-num = <0>; + status = "okay"; + + /* ADG704BRMZ 1:4 SPI mux/demux */ + sja1105: ethernet-switch@1 { + reg = <0x1>; + #address-cells = <1>; + #size-cells = <0>; + compatible = "nxp,sja1105t"; + /* 12 MHz */ + spi-max-frequency = <12000000>; + /* Sample data on trailing clock edge */ + spi-cpha; + /* SPI controller settings for SJA1105 timing requirements */ + fsl,spi-cs-sck-delay = <1000>; + fsl,spi-sck-cs-delay = <1000>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + /* ETH5 written on chassis */ + label = "swp5"; + phy-handle = <&rgmii_phy6>; + phy-mode = "rgmii-id"; + reg = <0>; + }; + + port@1 { + /* ETH2 written on chassis */ + label = "swp2"; + phy-handle = <&rgmii_phy3>; + phy-mode = "rgmii-id"; + reg = <1>; + }; + + port@2 { + /* ETH3 written on chassis */ + label = "swp3"; + phy-handle = <&rgmii_phy4>; + phy-mode = "rgmii-id"; + reg = <2>; + }; + + port@3 { + /* ETH4 written on chassis */ + label = "swp4"; + phy-handle = <&rgmii_phy5>; + phy-mode = "rgmii-id"; + reg = <3>; + }; + + port@4 { + /* Internal port connected to eth2 */ + ethernet = <&enet2>; + phy-mode = "rgmii"; + reg = <4>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; +}; + +&enet0 { + tbi-handle = <&tbi0>; + phy-handle = <&sgmii_phy2>; + phy-mode = "sgmii"; + status = "okay"; +}; + +&enet1 { + tbi-handle = <&tbi1>; + phy-handle = <&sgmii_phy1>; + phy-mode = "sgmii"; + status = "okay"; +}; + +/* RGMII delays added via PCB traces */ +&enet2 { + phy-mode = "rgmii"; + status = "okay"; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&esdhc { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + /* 3 axis accelerometer */ + accelerometer@1e { + compatible = "fsl,fxls8471"; + position = <0>; + reg = <0x1e>; + }; + + /* Audio codec (SAI2) */ + audio-codec@2a { + compatible = "fsl,sgtl5000"; + VDDIO-supply = <®_vddio_codec>; + VDDA-supply = <®_vdda_codec>; + #sound-dai-cells = <0>; + clocks = <&sys_mclk>; + reg = <0x2a>; + }; + + /* Current sensing circuit for 1V VDDCORE PMIC rail */ + current-sensor@44 { + compatible = "ti,ina220"; + shunt-resistor = <1000>; + reg = <0x44>; + }; + + /* Current sensing circuit for 12V VCC rail */ + current-sensor@45 { + compatible = "ti,ina220"; + shunt-resistor = <1000>; + reg = <0x45>; + }; + + /* Thermal monitor - case */ + temperature-sensor@48 { + compatible = "national,lm75"; + reg = <0x48>; + }; + + /* Thermal monitor - chip */ + temperature-sensor@4c { + compatible = "ti,tmp451"; + reg = <0x4c>; + }; + + eeprom@51 { + compatible = "atmel,24c32"; + reg = <0x51>; + }; + + /* Unsupported devices: + * - FXAS21002C Gyroscope at 0x20 + * - TI ADS7924 4-channel ADC at 0x49 + */ +}; + +&ifc { + status = "disabled"; +}; + +&lpuart0 { + status = "okay"; +}; + +&lpuart3 { + status = "okay"; +}; + +&mdio0 { + /* AR8031 */ + sgmii_phy1: ethernet-phy@1 { + reg = <0x1>; + }; + + /* AR8031 */ + sgmii_phy2: ethernet-phy@2 { + reg = <0x2>; + }; + + /* BCM5464 quad PHY */ + rgmii_phy3: ethernet-phy@3 { + reg = <0x3>; + }; + + rgmii_phy4: ethernet-phy@4 { + reg = <0x4>; + }; + + rgmii_phy5: ethernet-phy@5 { + reg = <0x5>; + }; + + rgmii_phy6: ethernet-phy@6 { + reg = <0x6>; + }; + + /* SGMII PCS for enet0 */ + tbi0: tbi-phy@1f { + reg = <0x1f>; + device_type = "tbi-phy"; + }; +}; + +&mdio1 { + /* SGMII PCS for enet1 */ + tbi1: tbi-phy@1f { + reg = <0x1f>; + device_type = "tbi-phy"; + }; +}; + +&qspi { + status = "okay"; + + flash@0 { + /* Rev. A uses 64MB flash, Rev. B & C use 32MB flash */ + compatible = "jedec,spi-nor", "s25fl256s1", "s25fl512s"; + spi-max-frequency = <20000000>; + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "RCW"; + reg = <0x0 0x40000>; + }; + + partition@40000 { + label = "U-Boot"; + reg = <0x40000 0x300000>; + }; + + partition@340000 { + label = "U-Boot Env"; + reg = <0x340000 0x100000>; + }; + }; + }; +}; + +&sai2 { + status = "okay"; +}; + +&sata { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; diff --git a/dts/src/arm/meson.dtsi b/dts/src/arm/meson.dtsi index 8841783ace..c4447f6c8b 100644 --- a/dts/src/arm/meson.dtsi +++ b/dts/src/arm/meson.dtsi @@ -1,48 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT /* * Copyright 2014 Carlo Caione <carlo@caione.org> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this library; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/interrupt-controller/irq.h> diff --git a/dts/src/arm/meson6-atv1200.dts b/dts/src/arm/meson6-atv1200.dts index 997e69c596..98e1c94c02 100644 --- a/dts/src/arm/meson6-atv1200.dts +++ b/dts/src/arm/meson6-atv1200.dts @@ -1,48 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT /* * Copyright 2014 Carlo Caione <carlo@caione.org> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this library; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/dts/src/arm/meson6.dtsi b/dts/src/arm/meson6.dtsi index 6558525591..2d31b7ce3f 100644 --- a/dts/src/arm/meson6.dtsi +++ b/dts/src/arm/meson6.dtsi @@ -1,48 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT /* * Copyright 2014 Carlo Caione <carlo@caione.org> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this library; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include "meson.dtsi" diff --git a/dts/src/arm/meson8-minix-neo-x8.dts b/dts/src/arm/meson8-minix-neo-x8.dts index 8686abd5de..61ec929ab8 100644 --- a/dts/src/arm/meson8-minix-neo-x8.dts +++ b/dts/src/arm/meson8-minix-neo-x8.dts @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT /* * Copyright 2014 Beniamino Galvani <b.galvani@gmail.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/dts/src/arm/meson8.dtsi b/dts/src/arm/meson8.dtsi index 7ef442462e..5a7e3e5cae 100644 --- a/dts/src/arm/meson8.dtsi +++ b/dts/src/arm/meson8.dtsi @@ -1,46 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT /* * Copyright 2014 Carlo Caione <carlo@caione.org> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/clock/meson8b-clkc.h> @@ -228,6 +188,28 @@ }; }; + mmcbus: bus@c8000000 { + compatible = "simple-bus"; + reg = <0xc8000000 0x8000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xc8000000 0x8000>; + + dmcbus: bus@6000 { + compatible = "simple-bus"; + reg = <0x6000 0x400>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x6000 0x400>; + + canvas: video-lut@20 { + compatible = "amlogic,meson8-canvas", + "amlogic,canvas"; + reg = <0x20 0x14>; + }; + }; + }; + apb: bus@d0000000 { compatible = "simple-bus"; reg = <0xd0000000 0x200000>; @@ -248,8 +230,8 @@ <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>, @@ -264,7 +246,6 @@ clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>; clock-names = "bus", "core"; operating-points-v2 = <&gpu_opp_table>; - switch-delay = <0xffff>; }; }; }; /* end of / */ diff --git a/dts/src/arm/meson8b-ec100.dts b/dts/src/arm/meson8b-ec100.dts index 9bf4249cb6..96d239d833 100644 --- a/dts/src/arm/meson8b-ec100.dts +++ b/dts/src/arm/meson8b-ec100.dts @@ -234,10 +234,6 @@ phy-handle = <ð_phy0>; phy-mode = "rmii"; - snps,reset-gpio = <&gpio GPIOH_4 0>; - snps,reset-delays-us = <0 10000 1000000>; - snps,reset-active-low; - mdio { compatible = "snps,dwmac-mdio"; #address-cells = <1>; @@ -246,6 +242,11 @@ eth_phy0: ethernet-phy@0 { /* IC Plus IP101A/G (0x02430c54) */ reg = <0>; + + reset-assert-us = <10000>; + reset-deassert-us = <10000>; + reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>; + icplus,select-interrupt; interrupt-parent = <&gpio_intc>; /* GPIOH_3 */ diff --git a/dts/src/arm/meson8b-mxq.dts b/dts/src/arm/meson8b-mxq.dts index 08ddd7fb0b..bb27b34eb3 100644 --- a/dts/src/arm/meson8b-mxq.dts +++ b/dts/src/arm/meson8b-mxq.dts @@ -1,50 +1,13 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT /* * Copyright 2015 Endless Mobile, Inc. * Author: Carlo Caione <carlo@endlessm.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; + +#include <dt-bindings/gpio/gpio.h> + #include "meson8b.dtsi" / { @@ -63,6 +26,127 @@ device_type = "memory"; reg = <0x40000000 0x40000000>; }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&saradc 8>; + }; + + vcck: regulator-vcck { + compatible = "pwm-regulator"; + + regulator-name = "VCCK"; + regulator-min-microvolt = <860000>; + regulator-max-microvolt = <1140000>; + + pwms = <&pwm_cd 0 1148 0>; + pwm-dutycycle-range = <100 0>; + + regulator-boot-on; + regulator-always-on; + }; + + vcc_1v8: regulator-vcc1v8 { + compatible = "regulator-fixed"; + + regulator-name = "VCC1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + vin-supply = <&vcc_3v3>; + }; + + vcc_3v3: regulator-vcc3v3 { + compatible = "regulator-fixed"; + + regulator-name = "VCC3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + vin-supply = <&vcc_5v>; + }; + + vcc_5v: regulator-vcc5v { + compatible = "regulator-fixed"; + + regulator-name = "VCC5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + regulator-boot-on; + regulator-always-on; + }; +}; + +&cpu0 { + cpu-supply = <&vcck>; +}; + +ðmac { + status = "okay"; + + pinctrl-0 = <ð_rmii_pins>; + pinctrl-names = "default"; + + phy-handle = <ð_phy0>; + phy-mode = "rmii"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + eth_phy0: ethernet-phy@0 { + /* IC Plus IP101A/G (0x02430c54) */ + reg = <0>; + + reset-assert-us = <10000>; + reset-deassert-us = <10000>; + reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>; + + icplus,select-interrupt; + interrupt-parent = <&gpio_intc>; + /* GPIOH_3 */ + interrupts = <17 IRQ_TYPE_LEVEL_LOW>; + }; + }; +}; + +&saradc { + status = "okay"; + vref-supply = <&vcc_1v8>; +}; + +&sdio { + status = "okay"; + + pinctrl-0 = <&sd_b_pins>; + pinctrl-names = "default"; + + /* SD card */ + sd_card_slot: slot@1 { + compatible = "mmc-slot"; + reg = <1>; + status = "okay"; + + bus-width = <4>; + no-sdio; + cap-mmc-highspeed; + cap-sd-highspeed; + disable-wp; + + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; + + vmmc-supply = <&vcc_3v3>; + }; +}; + +&pwm_cd { + status = "okay"; + pinctrl-0 = <&pwm_c1_pins>; + pinctrl-names = "default"; + clocks = <&clkc CLKID_XTAL>; + clock-names = "clkin0"; }; &uart_AO { @@ -70,3 +154,19 @@ pinctrl-0 = <&uart_ao_a_pins>; pinctrl-names = "default"; }; + +&usb0 { + status = "okay"; +}; + +&usb0_phy { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; + +&usb1_phy { + status = "okay"; +}; diff --git a/dts/src/arm/meson8b-odroidc1.dts b/dts/src/arm/meson8b-odroidc1.dts index f3ad9397f6..86c4614e0a 100644 --- a/dts/src/arm/meson8b-odroidc1.dts +++ b/dts/src/arm/meson8b-odroidc1.dts @@ -1,47 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT /* * Copyright 2015 Endless Mobile, Inc. * Author: Carlo Caione <carlo@endlessm.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; @@ -216,10 +176,6 @@ ðmac { status = "okay"; - snps,reset-gpio = <&gpio GPIOH_4 GPIO_ACTIVE_HIGH>; - snps,reset-active-low; - snps,reset-delays-us = <0 10000 30000>; - pinctrl-0 = <ð_rgmii_pins>; pinctrl-names = "default"; @@ -235,6 +191,11 @@ /* Realtek RTL8211F (0x001cc916) */ eth_phy: ethernet-phy@0 { reg = <0>; + + reset-assert-us = <10000>; + reset-deassert-us = <30000>; + reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>; + interrupt-parent = <&gpio_intc>; /* GPIOH_3 */ interrupts = <17 IRQ_TYPE_LEVEL_LOW>; diff --git a/dts/src/arm/meson8b.dtsi b/dts/src/arm/meson8b.dtsi index 800cd65fc5..fba2c70c2f 100644 --- a/dts/src/arm/meson8b.dtsi +++ b/dts/src/arm/meson8b.dtsi @@ -1,47 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT /* * Copyright 2015 Endless Mobile, Inc. * Author: Carlo Caione <carlo@endlessm.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/clock/meson8b-clkc.h> @@ -163,23 +123,23 @@ opp-255000000 { opp-hz = /bits/ 64 <255000000>; - opp-microvolt = <1150000>; + opp-microvolt = <1100000>; }; opp-364300000 { opp-hz = /bits/ 64 <364300000>; - opp-microvolt = <1150000>; + opp-microvolt = <1100000>; }; opp-425000000 { opp-hz = /bits/ 64 <425000000>; - opp-microvolt = <1150000>; + opp-microvolt = <1100000>; }; opp-510000000 { opp-hz = /bits/ 64 <510000000>; - opp-microvolt = <1150000>; + opp-microvolt = <1100000>; }; opp-637500000 { opp-hz = /bits/ 64 <637500000>; - opp-microvolt = <1150000>; + opp-microvolt = <1100000>; turbo-mode; }; }; @@ -205,6 +165,28 @@ }; }; + mmcbus: bus@c8000000 { + compatible = "simple-bus"; + reg = <0xc8000000 0x8000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xc8000000 0x8000>; + + dmcbus: bus@6000 { + compatible = "simple-bus"; + reg = <0x6000 0x400>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x6000 0x400>; + + canvas: video-lut@48 { + compatible = "amlogic,meson8b-canvas", + "amlogic,canvas"; + reg = <0x48 0x14>; + }; + }; + }; + apb: bus@d0000000 { compatible = "simple-bus"; reg = <0xd0000000 0x200000>; @@ -229,7 +211,6 @@ clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>; clock-names = "bus", "core"; operating-points-v2 = <&gpu_opp_table>; - switch-delay = <0xffff>; }; }; }; /* end of / */ diff --git a/dts/src/arm/meson8m2-mxiii-plus.dts b/dts/src/arm/meson8m2-mxiii-plus.dts index 29d830ae4b..d54477b100 100644 --- a/dts/src/arm/meson8m2-mxiii-plus.dts +++ b/dts/src/arm/meson8m2-mxiii-plus.dts @@ -73,10 +73,6 @@ amlogic,tx-delay-ns = <4>; - snps,reset-gpio = <&gpio GPIOH_4 0>; - snps,reset-delays-us = <0 10000 1000000>; - snps,reset-active-low; - mdio { compatible = "snps,dwmac-mdio"; #address-cells = <1>; @@ -85,6 +81,10 @@ eth_phy0: ethernet-phy@0 { /* Realtek RTL8211F (0x001cc916) */ reg = <0>; + + reset-assert-us = <10000>; + reset-deassert-us = <30000>; + reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>; }; }; }; @@ -114,8 +114,9 @@ regulator-always-on; }; - DCDC2 { - regulator-name = "VDDAO"; + vddee: DCDC2 { + /* the output is also used as VDDAO */ + regulator-name = "VDD_EE"; regulator-min-microvolt = <950000>; regulator-max-microvolt = <1150000>; regulator-boot-on; @@ -189,6 +190,10 @@ }; }; +&mali { + mali-supply = <&vddee>; +}; + &saradc { status = "okay"; vref-supply = <&vddio_ao1v8>; diff --git a/dts/src/arm/meson8m2.dtsi b/dts/src/arm/meson8m2.dtsi index bb87b251e1..5bde7f5020 100644 --- a/dts/src/arm/meson8m2.dtsi +++ b/dts/src/arm/meson8m2.dtsi @@ -14,6 +14,16 @@ compatible = "amlogic,meson8m2-clkc", "amlogic,meson8-clkc"; }; +&dmcbus { + /* the offset of the canvas registers has changed compared to Meson8 */ + /delete-node/ video-lut@20; + + canvas: video-lut@48 { + compatible = "amlogic,meson8m2-canvas", "amlogic,canvas"; + reg = <0x48 0x14>; + }; +}; + ðmac { compatible = "amlogic,meson8m2-dwmac", "snps,dwmac"; reg = <0xc9410000 0x10000 diff --git a/dts/src/arm/omap4-l4.dtsi b/dts/src/arm/omap4-l4.dtsi index 5059ecac44..bea05dc4ef 100644 --- a/dts/src/arm/omap4-l4.dtsi +++ b/dts/src/arm/omap4-l4.dtsi @@ -1371,7 +1371,6 @@ target-module@20000 { /* 0x48020000, ap 3 06.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "uart3"; reg = <0x20050 0x4>, <0x20054 0x4>, <0x20058 0x4>; @@ -1728,7 +1727,6 @@ target-module@6a000 { /* 0x4806a000, ap 26 18.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "uart1"; reg = <0x6a050 0x4>, <0x6a054 0x4>, <0x6a058 0x4>; @@ -1758,7 +1756,6 @@ target-module@6c000 { /* 0x4806c000, ap 28 20.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "uart2"; reg = <0x6c050 0x4>, <0x6c054 0x4>, <0x6c058 0x4>; @@ -1788,7 +1785,6 @@ target-module@6e000 { /* 0x4806e000, ap 30 1c.1 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "uart4"; reg = <0x6e050 0x4>, <0x6e054 0x4>, <0x6e058 0x4>; @@ -2107,7 +2103,6 @@ target-module@9c000 { /* 0x4809c000, ap 53 36.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mmc1"; reg = <0x9c000 0x4>, <0x9c010 0x4>; reg-names = "rev", "sysc"; @@ -2175,7 +2170,6 @@ target-module@ad000 { /* 0x480ad000, ap 63 50.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mmc3"; reg = <0xad000 0x4>, <0xad010 0x4>; reg-names = "rev", "sysc"; @@ -2241,7 +2235,6 @@ target-module@b4000 { /* 0x480b4000, ap 67 46.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mmc2"; reg = <0xb4000 0x4>, <0xb4010 0x4>; reg-names = "rev", "sysc"; @@ -2336,7 +2329,6 @@ target-module@d1000 { /* 0x480d1000, ap 73 44.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mmc4"; reg = <0xd1000 0x4>, <0xd1010 0x4>; reg-names = "rev", "sysc"; @@ -2369,7 +2361,6 @@ target-module@d5000 { /* 0x480d5000, ap 75 4e.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mmc5"; reg = <0xd5000 0x4>, <0xd5010 0x4>; reg-names = "rev", "sysc"; diff --git a/dts/src/arm/pxa300-raumfeld-common.dtsi b/dts/src/arm/pxa300-raumfeld-common.dtsi index 8ac24e3c85..8a6721d436 100644 --- a/dts/src/arm/pxa300-raumfeld-common.dtsi +++ b/dts/src/arm/pxa300-raumfeld-common.dtsi @@ -319,9 +319,9 @@ gpio_keys_pins: gpio-keys-pins { pinctrl-single,pins = < - MFP_PIN_PXA300(14) MFP_AF0 /* SCK */ - MFP_PIN_PXA300(115) MFP_AF0 /* MOSI */ - MFP_PIN_PXA300(119) MFP_AF0 /* MISO */ + MFP_PIN_PXA300(14) MFP_AF0 /* on-off */ + MFP_PIN_PXA300(115) MFP_AF0 /* rescue boot */ + MFP_PIN_PXA300(119) MFP_AF0 /* setup */ >; pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_FLOAT); }; diff --git a/dts/src/arm/pxa300-raumfeld-controller.dts b/dts/src/arm/pxa300-raumfeld-controller.dts index 65d825091f..12b15945ac 100644 --- a/dts/src/arm/pxa300-raumfeld-controller.dts +++ b/dts/src/arm/pxa300-raumfeld-controller.dts @@ -41,6 +41,8 @@ }; charger: charger { + pinctrl-names = "default"; + pinctrl-0 = <&charger_pins>; compatible = "gpio-charger"; charger-type = "mains"; gpios = <&gpio 101 GPIO_ACTIVE_LOW>; @@ -109,9 +111,10 @@ }; &keys { + pinctrl-0 = <&gpio_keys_pins &dock_detect_pins>; dock-detect { label = "dock detect"; - gpios = <&gpio 116 GPIO_ACTIVE_HIGH>; + gpios = <&gpio 116 GPIO_ACTIVE_LOW>; linux,code = <KEY_F5>; }; }; @@ -236,6 +239,22 @@ pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_FLOAT); }; + charger_pins: charger_pins { + pinctrl-single,pins = < + MFP_PIN_PXA300(31) MFP_AF0 /* PEN2 */ + >; + pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_HIGH); + pinctrl-single,bias-pullup = MPF_PULL_UP; + }; + + dock_detect_pins: dock_detect_pins { + pinctrl-single,pins = < + MFP_PIN_PXA300(116) MFP_AF0 /* DOCK_DETECT */ + >; + pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_HIGH); + pinctrl-single,bias-pullup = MPF_PULL_UP; + }; + lcdc_pins: lcdc-pins { pinctrl-single,pins = < MFP_PIN_PXA300(54) MFP_AF1 /* LDD_0 */ diff --git a/dts/src/arm/pxa300-raumfeld-speaker-one.dts b/dts/src/arm/pxa300-raumfeld-speaker-one.dts index 5f9e37585a..a70560a8ea 100644 --- a/dts/src/arm/pxa300-raumfeld-speaker-one.dts +++ b/dts/src/arm/pxa300-raumfeld-speaker-one.dts @@ -116,6 +116,9 @@ st,invalid-input-detect-mute; /* 2 (half-bridge) and 1 (full-bridge) on-board power */ st,output-conf = /bits/ 8 <0x1>; + st,ch1-output-mapping = /bits/ 8 <0>; + st,ch2-output-mapping = /bits/ 8 <1>; + st,ch3-output-mapping = /bits/ 8 <2>; st,needs_esd_watchdog; }; }; diff --git a/dts/src/arm/pxa3xx.dtsi b/dts/src/arm/pxa3xx.dtsi index e1e607f53c..c237a0e4b1 100644 --- a/dts/src/arm/pxa3xx.dtsi +++ b/dts/src/arm/pxa3xx.dtsi @@ -71,6 +71,14 @@ #define MFP_DS13X < (0x7 << 10) MFP_DSMSK > /* + * MFP bias pull mode for pins. + * Example of use: pinctrl-single,bias-pullup = MPF_PULL_UP; + */ +#define MPF_PULL_MSK (0x7 << 13) +#define MPF_PULL_DOWN < (0x5 << 13) (0x5 << 13) 0 MPF_PULL_MSK > +#define MPF_PULL_UP < (0x6 << 13) (0x6 << 13) 0 MPF_PULL_MSK > + +/* * MFP low power mode for pins. * Example of use: * pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW|MFP_LPM_EDGE_FALL); diff --git a/dts/src/arm/qcom-apq8064.dtsi b/dts/src/arm/qcom-apq8064.dtsi index 65975df6a8..8b79b4112e 100644 --- a/dts/src/arm/qcom-apq8064.dtsi +++ b/dts/src/arm/qcom-apq8064.dtsi @@ -1603,7 +1603,7 @@ }; replicator { - compatible = "arm,coresight-replicator"; + compatible = "arm,coresight-static-replicator"; clocks = <&rpmcc RPM_QDSS_CLK>; clock-names = "apb_pclk"; @@ -1636,7 +1636,7 @@ }; funnel@1a04000 { - compatible = "arm,coresight-funnel", "arm,primecell"; + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0x1a04000 0x1000>; clocks = <&rpmcc RPM_QDSS_CLK>; diff --git a/dts/src/arm/qcom-msm8974-fairphone-fp2.dts b/dts/src/arm/qcom-msm8974-fairphone-fp2.dts index 643c57f848..bf402ae392 100644 --- a/dts/src/arm/qcom-msm8974-fairphone-fp2.dts +++ b/dts/src/arm/qcom-msm8974-fairphone-fp2.dts @@ -50,6 +50,12 @@ }; }; + vibrator { + compatible = "gpio-vibrator"; + enable-gpios = <&msmgpio 86 GPIO_ACTIVE_HIGH>; + vcc-supply = <&pm8941_l18>; + }; + smd { rpm { rpm_requests { diff --git a/dts/src/arm/qcom-msm8974-lge-nexus5-hammerhead.dts b/dts/src/arm/qcom-msm8974-lge-nexus5-hammerhead.dts index b3b04736a1..3487daf98e 100644 --- a/dts/src/arm/qcom-msm8974-lge-nexus5-hammerhead.dts +++ b/dts/src/arm/qcom-msm8974-lge-nexus5-hammerhead.dts @@ -280,6 +280,16 @@ }; }; + i2c2_pins: i2c2 { + mux { + pins = "gpio6", "gpio7"; + function = "blsp_i2c2"; + + drive-strength = <2>; + bias-disable; + }; + }; + i2c3_pins: i2c3 { mux { pins = "gpio10", "gpio11"; @@ -289,6 +299,16 @@ }; }; + i2c11_pins: i2c11 { + mux { + pins = "gpio83", "gpio84"; + function = "blsp_i2c11"; + + drive-strength = <2>; + bias-disable; + }; + }; + i2c12_pins: i2c12 { mux { pins = "gpio87", "gpio88"; @@ -306,6 +326,35 @@ input-enable; }; }; + + touch_pin: touch { + int { + pins = "gpio5"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + input-enable; + }; + + reset { + pins = "gpio8"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-up; + }; + }; + + panel_pin: panel { + te { + pins = "gpio12"; + function = "mdp_vsync"; + + drive-strength = <2>; + bias-disable; + }; + }; }; sdhci@f9824900 { @@ -369,6 +418,30 @@ }; }; + i2c@f9967000 { + status = "ok"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c11_pins>; + clock-frequency = <355000>; + qcom,src-freq = <50000000>; + + led-controller@38 { + compatible = "ti,lm3630a"; + status = "ok"; + reg = <0x38>; + + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + led-sources = <0 1>; + label = "lcd-backlight"; + default-brightness = <200>; + }; + }; + }; + i2c@f9968000 { status = "ok"; pinctrl-names = "default"; @@ -424,6 +497,41 @@ }; }; + i2c@f9924000 { + status = "ok"; + + clock-frequency = <355000>; + qcom,src-freq = <50000000>; + + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + + synaptics@70 { + compatible = "syna,rmi4-i2c"; + reg = <0x70>; + + interrupts-extended = <&msmgpio 5 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&pm8941_l22>; + vio-supply = <&pm8941_lvs3>; + + pinctrl-names = "default"; + pinctrl-0 = <&touch_pin>; + + #address-cells = <1>; + #size-cells = <0>; + + rmi4-f01@1 { + reg = <0x1>; + syna,nosleep-mode = <1>; + }; + + rmi4-f12@12 { + reg = <0x12>; + syna,sensor-type = <1>; + }; + }; + }; + i2c@f9925000 { status = "ok"; pinctrl-names = "default"; @@ -466,6 +574,54 @@ }; }; }; + + mdss@fd900000 { + status = "ok"; + + mdp@fd900000 { + status = "ok"; + }; + + dsi@fd922800 { + status = "ok"; + + vdda-supply = <&pm8941_l2>; + vdd-supply = <&pm8941_lvs3>; + vddio-supply = <&pm8941_l12>; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + port@1 { + endpoint { + remote-endpoint = <&panel_in>; + data-lanes = <0 1 2 3>; + }; + }; + }; + + panel: panel@0 { + reg = <0>; + compatible = "lg,acx467akm-7"; + + pinctrl-names = "default"; + pinctrl-0 = <&panel_pin>; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; + }; + + dsi-phy@fd922a00 { + status = "ok"; + + vddio-supply = <&pm8941_l12>; + }; + }; }; &spmi_bus { diff --git a/dts/src/arm/qcom-msm8974.dtsi b/dts/src/arm/qcom-msm8974.dtsi index 45b5c8ef03..369e58f641 100644 --- a/dts/src/arm/qcom-msm8974.dtsi +++ b/dts/src/arm/qcom-msm8974.dtsi @@ -3,6 +3,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,gcc-msm8974.h> +#include <dt-bindings/clock/qcom,mmcc-msm8974.h> #include <dt-bindings/clock/qcom,rpmcc.h> #include <dt-bindings/reset/qcom,gcc-msm8974.h> #include <dt-bindings/gpio/gpio.h> @@ -897,7 +898,7 @@ }; funnel@fc31b000 { - compatible = "arm,coresight-funnel", "arm,primecell"; + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0xfc31b000 0x1000>; clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; @@ -931,7 +932,7 @@ }; funnel@fc31a000 { - compatible = "arm,coresight-funnel", "arm,primecell"; + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0xfc31a000 0x1000>; clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; @@ -969,7 +970,7 @@ }; funnel@fc345000 { /* KPSS funnel only 4 inputs are used */ - compatible = "arm,coresight-funnel", "arm,primecell"; + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0xfc345000 0x1000>; clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; @@ -1085,6 +1086,137 @@ }; }; }; + + mdss: mdss@fd900000 { + status = "disabled"; + + compatible = "qcom,mdss"; + reg = <0xfd900000 0x100>, + <0xfd924000 0x1000>; + reg-names = "mdss_phys", + "vbif_phys"; + + power-domains = <&mmcc MDSS_GDSC>; + + clocks = <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_AXI_CLK>, + <&mmcc MDSS_VSYNC_CLK>; + clock-names = "iface", + "bus", + "vsync"; + + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + + interrupt-controller; + #interrupt-cells = <1>; + + #address-cells = <1>; + #size-cells = <1>; + ranges; + + mdp: mdp@fd900000 { + status = "disabled"; + + compatible = "qcom,mdp5"; + reg = <0xfd900100 0x22000>; + reg-names = "mdp_phys"; + + interrupt-parent = <&mdss>; + interrupts = <0 0>; + + clocks = <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_AXI_CLK>, + <&mmcc MDSS_MDP_CLK>, + <&mmcc MDSS_VSYNC_CLK>; + clock-names = "iface", + "bus", + "core", + "vsync"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdp5_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + }; + }; + + dsi0: dsi@fd922800 { + status = "disabled"; + + compatible = "qcom,mdss-dsi-ctrl"; + reg = <0xfd922800 0x1f8>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH>; + + assigned-clocks = <&mmcc BYTE0_CLK_SRC>, + <&mmcc PCLK0_CLK_SRC>; + assigned-clock-parents = <&dsi_phy0 0>, + <&dsi_phy0 1>; + + clocks = <&mmcc MDSS_MDP_CLK>, + <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_AXI_CLK>, + <&mmcc MDSS_BYTE0_CLK>, + <&mmcc MDSS_PCLK0_CLK>, + <&mmcc MDSS_ESC0_CLK>, + <&mmcc MMSS_MISC_AHB_CLK>; + clock-names = "mdp_core", + "iface", + "bus", + "byte", + "pixel", + "core", + "core_mmss"; + + phys = <&dsi_phy0>; + phy-names = "dsi-phy"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + remote-endpoint = <&mdp5_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + dsi0_out: endpoint { + }; + }; + }; + }; + + dsi_phy0: dsi-phy@fd922a00 { + status = "disabled"; + + compatible = "qcom,dsi-phy-28nm-hpm"; + reg = <0xfd922a00 0xd4>, + <0xfd922b00 0x280>, + <0xfd922d80 0x30>; + reg-names = "dsi_pll", + "dsi_phy", + "dsi_phy_regulator"; + + #clock-cells = <1>; + #phy-cells = <0>; + qcom,dsi-phy-index = <0>; + + clocks = <&mmcc MDSS_AHB_CLK>; + clock-names = "iface"; + }; + }; }; smd { diff --git a/dts/src/arm/r7s72100-genmai.dts b/dts/src/arm/r7s72100-genmai.dts index 474baa0c7c..07d611d2b7 100644 --- a/dts/src/arm/r7s72100-genmai.dts +++ b/dts/src/arm/r7s72100-genmai.dts @@ -20,7 +20,7 @@ }; chosen { - bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; + bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; stdout-path = "serial0:115200n8"; }; diff --git a/dts/src/arm/r7s72100-rskrza1.dts b/dts/src/arm/r7s72100-rskrza1.dts index ff24301dc1..99acfe4fe1 100644 --- a/dts/src/arm/r7s72100-rskrza1.dts +++ b/dts/src/arm/r7s72100-rskrza1.dts @@ -8,6 +8,7 @@ /dts-v1/; #include "r7s72100.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> #include <dt-bindings/pinctrl/r7s72100-pinctrl.h> / { @@ -28,6 +29,37 @@ reg = <0x08000000 0x02000000>; }; + keyboard { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&keyboard_pins>; + + key-1 { + interrupt-parent = <&irqc>; + interrupts = <3 IRQ_TYPE_EDGE_BOTH>; + linux,code = <KEY_1>; + label = "SW1"; + wakeup-source; + }; + + key-2 { + interrupt-parent = <&irqc>; + interrupts = <2 IRQ_TYPE_EDGE_BOTH>; + linux,code = <KEY_2>; + label = "SW2"; + wakeup-source; + }; + + key-3 { + interrupt-parent = <&irqc>; + interrupts = <5 IRQ_TYPE_EDGE_BOTH>; + linux,code = <KEY_3>; + label = "SW3"; + wakeup-source; + }; + }; + lbsc { #address-cells = <1>; #size-cells = <1>; @@ -101,6 +133,12 @@ <RZA1_PINMUX(1, 7, 1)>; /* RIIC3SDA */ }; + keyboard_pins: keyboard { + pinmux = <RZA1_PINMUX(1, 9, 3)>, /* IRQ3 */ + <RZA1_PINMUX(1, 8, 3)>, /* IRQ2 */ + <RZA1_PINMUX(1, 11, 3)>; /* IRQ5 */ + }; + /* Serial Console */ scif2_pins: serial2 { pinmux = <RZA1_PINMUX(3, 0, 6)>, /* TxD2 */ diff --git a/dts/src/arm/r7s72100.dtsi b/dts/src/arm/r7s72100.dtsi index 2211f88ede..d03dcd919d 100644 --- a/dts/src/arm/r7s72100.dtsi +++ b/dts/src/arm/r7s72100.dtsi @@ -670,6 +670,25 @@ status = "disabled"; }; + irqc: interrupt-controller@fcfef800 { + compatible = "renesas,r7s72100-irqc", + "renesas,rza1-irqc"; + #interrupt-cells = <2>; + #address-cells = <0>; + interrupt-controller; + reg = <0xfcfef800 0x6>; + interrupt-map = + <0 0 &gic GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <1 0 &gic GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <2 0 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <3 0 &gic GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <4 0 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <5 0 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, + <6 0 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <7 0 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map-mask = <7 0>; + }; + mtu2: timer@fcff0000 { compatible = "renesas,mtu2-r7s72100", "renesas,mtu2"; reg = <0xfcff0000 0x400>; diff --git a/dts/src/arm/r7s9210-rza2mevb.dts b/dts/src/arm/r7s9210-rza2mevb.dts index 991e09de12..d062d02865 100644 --- a/dts/src/arm/r7s9210-rza2mevb.dts +++ b/dts/src/arm/r7s9210-rza2mevb.dts @@ -9,6 +9,7 @@ /dts-v1/; #include "r7s9210.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> #include <dt-bindings/pinctrl/r7s9210-pinctrl.h> / { @@ -17,6 +18,8 @@ aliases { serial0 = &scif4; + ethernet0 = ðer0; + ethernet1 = ðer1; }; chosen { @@ -24,9 +27,19 @@ stdout-path = "serial0:115200n8"; }; - memory@40000000 { - device_type = "memory"; - reg = <0x40000000 0x00800000>; /* HyperRAM */ + keyboard { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&keyboard_pins>; + + key-3 { + interrupt-parent = <&irqc>; + interrupts = <0 IRQ_TYPE_EDGE_BOTH>; + linux,code = <KEY_3>; + label = "SW3"; + wakeup-source; + }; }; lbsc { @@ -44,6 +57,41 @@ gpios = <&pinctrl RZA2_PIN(PORTC, 1) GPIO_ACTIVE_HIGH>; }; }; + + memory@40000000 { + device_type = "memory"; + reg = <0x40000000 0x00800000>; /* HyperRAM */ + }; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +ðer0 { + pinctrl-names = "default"; + pinctrl-0 = <ð0_pins>; + status = "okay"; + renesas,no-ether-link; + phy-handle = <&phy0>; + phy0: ethernet-phy@0 { + reg = <0>; + }; +}; + +ðer1 { + pinctrl-names = "default"; + pinctrl-0 = <ð1_pins>; + status = "okay"; + renesas,no-ether-link; + phy-handle = <&phy1>; + phy1: ethernet-phy@1 { + reg = <0>; + }; }; /* EXTAL */ @@ -51,26 +99,80 @@ clock-frequency = <24000000>; /* 24MHz */ }; -/* RTC_X1 */ -&rtc_x1_clk { - clock-frequency = <32768>; +/* High resolution System tick timers */ +&ostm0 { + status = "okay"; +}; + +&ostm1 { + status = "okay"; }; &pinctrl { + eth0_pins: eth0 { + pinmux = <RZA2_PINMUX(PORTE, 0, 7)>, /* REF50CK0 */ + <RZA2_PINMUX(PORT6, 1, 7)>, /* RMMI0_TXDEN */ + <RZA2_PINMUX(PORT6, 2, 7)>, /* RMII0_TXD0 */ + <RZA2_PINMUX(PORT6, 3, 7)>, /* RMII0_TXD1 */ + <RZA2_PINMUX(PORTE, 4, 7)>, /* RMII0_CRSDV */ + <RZA2_PINMUX(PORTE, 1, 7)>, /* RMII0_RXD0 */ + <RZA2_PINMUX(PORTE, 2, 7)>, /* RMII0_RXD1 */ + <RZA2_PINMUX(PORTE, 3, 7)>, /* RMII0_RXER */ + <RZA2_PINMUX(PORTE, 5, 1)>, /* ET0_MDC */ + <RZA2_PINMUX(PORTE, 6, 1)>, /* ET0_MDIO */ + <RZA2_PINMUX(PORTL, 0, 5)>; /* IRQ4 */ + }; + + eth1_pins: eth1 { + pinmux = <RZA2_PINMUX(PORTK, 3, 7)>, /* REF50CK1 */ + <RZA2_PINMUX(PORTK, 0, 7)>, /* RMMI1_TXDEN */ + <RZA2_PINMUX(PORTK, 1, 7)>, /* RMII1_TXD0 */ + <RZA2_PINMUX(PORTK, 2, 7)>, /* RMII1_TXD1 */ + <RZA2_PINMUX(PORT3, 2, 7)>, /* RMII1_CRSDV */ + <RZA2_PINMUX(PORTK, 4, 7)>, /* RMII1_RXD0 */ + <RZA2_PINMUX(PORT3, 5, 7)>, /* RMII1_RXD1 */ + <RZA2_PINMUX(PORT3, 1, 7)>, /* RMII1_RXER */ + <RZA2_PINMUX(PORT3, 3, 1)>, /* ET1_MDC */ + <RZA2_PINMUX(PORT3, 4, 1)>, /* ET1_MDIO */ + <RZA2_PINMUX(PORTL, 1, 5)>; /* IRQ5 */ + }; + + keyboard_pins: keyboard { + pinmux = <RZA2_PINMUX(PORTJ, 1, 6)>; /* IRQ0 */ + }; + /* Serial Console */ scif4_pins: serial4 { pinmux = <RZA2_PINMUX(PORT9, 0, 4)>, /* TxD4 */ <RZA2_PINMUX(PORT9, 1, 4)>; /* RxD4 */ }; -}; -/* High resolution System tick timers */ -&ostm0 { - status = "okay"; + sdhi0_pins: sdhi0 { + pinmux = <RZA2_PINMUX(PORT5, 0, 3)>, /* SD0_CD */ + <RZA2_PINMUX(PORT5, 1, 3)>; /* SD0_WP */ + }; + + sdhi1_pins: sdhi1 { + pinmux = <RZA2_PINMUX(PORT5, 4, 3)>, /* SD1_CD */ + <RZA2_PINMUX(PORT5, 5, 3)>; /* SD1_WP */ + }; + + usb0_pins: usb0 { + pinmux = <RZA2_PINMUX(PORT5, 2, 3)>, /* VBUSIN0 */ + <RZA2_PINMUX(PORTC, 6, 1)>, /* VBUSEN0 */ + <RZA2_PINMUX(PORTC, 7, 1)>; /* OVRCUR0 */ + }; + + usb1_pins: usb1 { + pinmux = <RZA2_PINMUX(PORTC, 0, 1)>, /* VBUSIN1 */ + <RZA2_PINMUX(PORTC, 5, 1)>, /* VBUSEN1 */ + <RZA2_PINMUX(PORT7, 5, 5)>; /* OVRCUR1 */ + }; }; -&ostm1 { - status = "okay"; +/* RTC_X1 */ +&rtc_x1_clk { + clock-frequency = <32768>; }; /* Serial Console */ @@ -80,3 +182,38 @@ status = "okay"; }; + +&sdhi0 { + pinctrl-names = "default"; + pinctrl-0 = <&sdhi0_pins>; + bus-width = <4>; + status = "okay"; +}; + +&sdhi1 { + pinctrl-names = "default"; + pinctrl-0 = <&sdhi1_pins>; + bus-width = <4>; + status = "okay"; +}; + +/* USB-0 as Host */ +&usb2_phy0 { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_pins>; + dr_mode = "host"; /* Requires JP3 to be fitted */ + status = "okay"; +}; + +/* USB-1 as Host */ +&usb2_phy1 { + pinctrl-names = "default"; + pinctrl-0 = <&usb1_pins>; + dr_mode = "host"; + status = "okay"; +}; + +/* USB_X1 */ +&usb_x1_clk { + clock-frequency = <48000000>; +}; diff --git a/dts/src/arm/r7s9210.dtsi b/dts/src/arm/r7s9210.dtsi index 22baa96f59..72b79770e3 100644 --- a/dts/src/arm/r7s9210.dtsi +++ b/dts/src/arm/r7s9210.dtsi @@ -30,6 +30,13 @@ clock-frequency = <0>; }; + usb_x1_clk: usb_x1 { + #clock-cells = <0>; + compatible = "fixed-clock"; + /* If clk present, value (48000000) must be set by board */ + clock-frequency = <0>; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -146,6 +153,152 @@ status = "disabled"; }; + spi0: spi@e800c800 { + compatible = "renesas,rspi-r7s9210", "renesas,rspi-rz"; + reg = <0xe800c800 0x24>; + interrupts = <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", "rx", "tx"; + clocks = <&cpg CPG_MOD 97>; + power-domains = <&cpg>; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi1: spi@e800d000 { + compatible = "renesas,rspi-r7s9210", "renesas,rspi-rz"; + reg = <0xe800d000 0x24>; + interrupts = <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", "rx", "tx"; + clocks = <&cpg CPG_MOD 96>; + power-domains = <&cpg>; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi2: spi@e800d800 { + compatible = "renesas,rspi-r7s9210", "renesas,rspi-rz"; + reg = <0xe800d800 0x24>; + interrupts = <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", "rx", "tx"; + clocks = <&cpg CPG_MOD 95>; + power-domains = <&cpg>; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + ether0: ethernet@e8204000 { + compatible = "renesas,ether-r7s9210"; + reg = <0xe8204000 0x200>; + interrupts = <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 65>; + power-domains = <&cpg>; + + phy-mode = "rmii"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + ether1: ethernet@e8204200 { + compatible = "renesas,ether-r7s9210"; + reg = <0xe8204200 0x200>; + interrupts = <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 64>; + power-domains = <&cpg>; + phy-mode = "rmii"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c0: i2c@e803a000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,riic-r7s9210", "renesas,riic-rz"; + reg = <0xe803a000 0x44>; + interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 233 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 234 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 87>; + power-domains = <&cpg>; + clock-frequency = <100000>; + status = "disabled"; + }; + + i2c1: i2c@e803a400 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,riic-r7s9210", "renesas,riic-rz"; + reg = <0xe803a400 0x44>; + interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 241 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 242 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 86>; + power-domains = <&cpg>; + clock-frequency = <100000>; + status = "disabled"; + }; + + i2c2: i2c@e803a800 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,riic-r7s9210", "renesas,riic-rz"; + reg = <0xe803a800 0x44>; + interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 249 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 250 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 85>; + power-domains = <&cpg>; + clock-frequency = <100000>; + status = "disabled"; + }; + + i2c3: i2c@e803ac00 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,riic-r7s9210", "renesas,riic-rz"; + reg = <0xe803ac00 0x44>; + interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 257 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 258 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 84>; + power-domains = <&cpg>; + clock-frequency = <100000>; + status = "disabled"; + }; + ostm0: timer@e803b000 { compatible = "renesas,r7s9210-ostm", "renesas,ostm"; reg = <0xe803b000 0x30>; @@ -176,6 +329,120 @@ status = "disabled"; }; + ohci0: usb@e8218000 { + compatible = "generic-ohci"; + reg = <0xe8218000 0x100>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 61>; + phys = <&usb2_phy0>; + phy-names = "usb"; + power-domains = <&cpg>; + status = "disabled"; + }; + + ehci0: usb@e8218100 { + compatible = "generic-ehci"; + reg = <0xe8218100 0x100>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 61>; + phys = <&usb2_phy0>; + phy-names = "usb"; + power-domains = <&cpg>; + status = "disabled"; + }; + + usb2_phy0: usb-phy@e8218200 { + compatible = "renesas,usb2-phy-r7s9210", "renesas,rcar-gen3-usb2-phy"; + reg = <0xe8218200 0x700>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 61>, <&usb_x1_clk>; + clock-names = "fck", "usb_x1"; + power-domains = <&cpg>; + #phy-cells = <0>; + status = "disabled"; + }; + + usbhs0: usb@e8219000 { + compatible = "renesas,usbhs-r7s9210", "renesas,rza2-usbhs"; + reg = <0xe8219000 0x724>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 61>; + renesas,buswait = <7>; + phys = <&usb2_phy0>; + phy-names = "usb"; + power-domains = <&cpg>; + status = "disabled"; + }; + + ohci1: usb@e821a000 { + compatible = "generic-ohci"; + reg = <0xe821a000 0x100>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 60>; + phys = <&usb2_phy1>; + phy-names = "usb"; + power-domains = <&cpg>; + status = "disabled"; + }; + + ehci1: usb@e821a100 { + compatible = "generic-ehci"; + reg = <0xe821a100 0x100>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 60>; + phys = <&usb2_phy1>; + phy-names = "usb"; + power-domains = <&cpg>; + status = "disabled"; + }; + + usb2_phy1: usb-phy@e821a200 { + compatible = "renesas,usb2-phy-r7s9210", "renesas,rcar-gen3-usb2-phy"; + reg = <0xe821a200 0x700>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 60>, <&usb_x1_clk>; + clock-names = "fck", "usb_x1"; + power-domains = <&cpg>; + #phy-cells = <0>; + status = "disabled"; + }; + + usbhs1: usb@e821b000 { + compatible = "renesas,usbhs-r7s9210", "renesas,rza2-usbhs"; + reg = <0xe821b000 0x724>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 60>; + renesas,buswait = <7>; + phys = <&usb2_phy1>; + phy-names = "usb"; + power-domains = <&cpg>; + status = "disabled"; + }; + + sdhi0: sd@e8228000 { + compatible = "renesas,sdhi-r7s9210"; + reg = <0xe8228000 0x8c0>; + interrupts = <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 103>, <&cpg CPG_MOD 102>; + clock-names = "core", "cd"; + power-domains = <&cpg>; + cap-sd-highspeed; + cap-sdio-irq; + status = "disabled"; + }; + + sdhi1: sd@e822a000 { + compatible = "renesas,sdhi-r7s9210"; + reg = <0xe822a000 0x8c0>; + interrupts = <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 101>, <&cpg CPG_MOD 100>; + clock-names = "core", "cd"; + power-domains = <&cpg>; + cap-sd-highspeed; + cap-sdio-irq; + status = "disabled"; + }; + gic: interrupt-controller@e8221000 { compatible = "arm,gic-400"; #interrupt-cells = <3>; @@ -206,6 +473,25 @@ reg = <0xfcfe8004 4>; }; + irqc: interrupt-controller@fcfef800 { + compatible = "renesas,r7s9210-irqc", + "renesas,rza1-irqc"; + #interrupt-cells = <2>; + #address-cells = <0>; + interrupt-controller; + reg = <0xfcfef800 0x6>; + interrupt-map = + <0 0 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <1 0 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, + <2 0 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <3 0 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <4 0 &gic GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <5 0 &gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <6 0 &gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, + <7 0 &gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map-mask = <7 0>; + }; + pinctrl: pin-controller@fcffe000 { compatible = "renesas,r7s9210-pinctrl"; reg = <0xfcffe000 0x1000>; diff --git a/dts/src/arm/r8a73a4-ape6evm.dts b/dts/src/arm/r8a73a4-ape6evm.dts index f70f4a3e5c..a5351ddbf5 100644 --- a/dts/src/arm/r8a73a4-ape6evm.dts +++ b/dts/src/arm/r8a73a4-ape6evm.dts @@ -19,7 +19,7 @@ }; chosen { - bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; + bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; stdout-path = "serial0:115200n8"; }; diff --git a/dts/src/arm/r8a7740-armadillo800eva.dts b/dts/src/arm/r8a7740-armadillo800eva.dts index 32757caa25..758360a2ed 100644 --- a/dts/src/arm/r8a7740-armadillo800eva.dts +++ b/dts/src/arm/r8a7740-armadillo800eva.dts @@ -21,7 +21,7 @@ }; chosen { - bootargs = "earlyprintk ignore_loglevel root=/dev/nfs ip=dhcp rw"; + bootargs = "earlyprintk ignore_loglevel root=/dev/nfs ip=on rw"; stdout-path = "serial0:115200n8"; }; diff --git a/dts/src/arm/r8a7743-sk-rzg1m.dts b/dts/src/arm/r8a7743-sk-rzg1m.dts index ca0e0fc9b2..807e7d0d6b 100644 --- a/dts/src/arm/r8a7743-sk-rzg1m.dts +++ b/dts/src/arm/r8a7743-sk-rzg1m.dts @@ -17,7 +17,7 @@ }; chosen { - bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; + bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; stdout-path = "serial0:115200n8"; }; diff --git a/dts/src/arm/r8a7745-iwg22d-sodimm.dts b/dts/src/arm/r8a7745-iwg22d-sodimm.dts index 1db220cfc1..ce6603b099 100644 --- a/dts/src/arm/r8a7745-iwg22d-sodimm.dts +++ b/dts/src/arm/r8a7745-iwg22d-sodimm.dts @@ -42,7 +42,7 @@ }; chosen { - bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; + bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; stdout-path = "serial3:115200n8"; }; diff --git a/dts/src/arm/r8a7745-sk-rzg1e.dts b/dts/src/arm/r8a7745-sk-rzg1e.dts index 655b10bb42..db72a801ab 100644 --- a/dts/src/arm/r8a7745-sk-rzg1e.dts +++ b/dts/src/arm/r8a7745-sk-rzg1e.dts @@ -17,7 +17,7 @@ }; chosen { - bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; + bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; stdout-path = "serial0:115200n8"; }; diff --git a/dts/src/arm/r8a77470-iwg23s-sbc.dts b/dts/src/arm/r8a77470-iwg23s-sbc.dts index 2840eb0d6f..450efe9230 100644 --- a/dts/src/arm/r8a77470-iwg23s-sbc.dts +++ b/dts/src/arm/r8a77470-iwg23s-sbc.dts @@ -18,7 +18,7 @@ }; chosen { - bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; + bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; stdout-path = "serial1:115200n8"; }; @@ -63,7 +63,7 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; - gpios = <&gpio2 24 GPIO_ACTIVE_LOW>; + gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>; gpios-states = <1>; states = <3300000 1 1800000 0>; diff --git a/dts/src/arm/r8a7778-bockw.dts b/dts/src/arm/r8a7778-bockw.dts index 0b49956069..6c7b07c4b9 100644 --- a/dts/src/arm/r8a7778-bockw.dts +++ b/dts/src/arm/r8a7778-bockw.dts @@ -25,7 +25,7 @@ }; chosen { - bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; + bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; stdout-path = "serial0:115200n8"; }; diff --git a/dts/src/arm/r8a7779-marzen.dts b/dts/src/arm/r8a7779-marzen.dts index d4bee1ec90..c755f0b8fd 100644 --- a/dts/src/arm/r8a7779-marzen.dts +++ b/dts/src/arm/r8a7779-marzen.dts @@ -21,7 +21,7 @@ }; chosen { - bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; + bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; stdout-path = "serial0:115200n8"; }; diff --git a/dts/src/arm/r8a7790-lager.dts b/dts/src/arm/r8a7790-lager.dts index 7b9508e83d..83cc619861 100644 --- a/dts/src/arm/r8a7790-lager.dts +++ b/dts/src/arm/r8a7790-lager.dts @@ -56,7 +56,7 @@ }; chosen { - bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; + bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; stdout-path = "serial0:115200n8"; }; @@ -423,6 +423,8 @@ */ i2cpwr: i2c-13 { compatible = "i2c-demux-pinctrl"; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_irq_pins>; i2c-parent = <&iic3>, <&i2c3>; i2c-bus-name = "i2c-pwr"; #address-cells = <1>; @@ -615,6 +617,11 @@ function = "iic3"; }; + pmic_irq_pins: pmicirq { + groups = "intc_irq2"; + function = "intc"; + }; + hsusb_pins: hsusb { groups = "usb0_ovc_vbus"; function = "usb0"; diff --git a/dts/src/arm/r8a7790-stout.dts b/dts/src/arm/r8a7790-stout.dts index 7a7d3b84d1..a315ba749a 100644 --- a/dts/src/arm/r8a7790-stout.dts +++ b/dts/src/arm/r8a7790-stout.dts @@ -19,7 +19,7 @@ }; chosen { - bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; + bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; stdout-path = "serial0:115200n8"; }; @@ -179,6 +179,11 @@ function = "iic3"; }; + pmic_irq_pins: pmicirq { + groups = "intc_irq2"; + function = "intc"; + }; + usb0_pins: usb0 { groups = "usb0"; function = "usb0"; @@ -317,7 +322,7 @@ &iic3 { pinctrl-names = "default"; - pinctrl-0 = <&iic3_pins>; + pinctrl-0 = <&iic3_pins &pmic_irq_pins>; status = "okay"; pmic@58 { diff --git a/dts/src/arm/r8a7791-koelsch.dts b/dts/src/arm/r8a7791-koelsch.dts index e6580aa0ce..af6bd8fcd5 100644 --- a/dts/src/arm/r8a7791-koelsch.dts +++ b/dts/src/arm/r8a7791-koelsch.dts @@ -56,7 +56,7 @@ }; chosen { - bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; + bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; stdout-path = "serial0:115200n8"; }; @@ -540,6 +540,11 @@ function = "intc"; }; + pmic_irq_pins: pmicirq { + groups = "intc_irq2"; + function = "intc"; + }; + sdhi0_pins: sd0 { groups = "sdhi0_data4", "sdhi0_ctrl"; function = "sdhi0"; @@ -776,6 +781,8 @@ }; &i2c6 { + pinctrl-names = "default"; + pinctrl-0 = <&pmic_irq_pins>; status = "okay"; clock-frequency = <100000>; diff --git a/dts/src/arm/r8a7791-porter.dts b/dts/src/arm/r8a7791-porter.dts index fefdf8238b..d6cf16aac1 100644 --- a/dts/src/arm/r8a7791-porter.dts +++ b/dts/src/arm/r8a7791-porter.dts @@ -31,7 +31,7 @@ }; chosen { - bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; + bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; stdout-path = "serial0:115200n8"; }; @@ -228,6 +228,11 @@ function = "intc"; }; + pmic_irq_pins: pmicirq { + groups = "intc_irq2"; + function = "intc"; + }; + sdhi0_pins: sd0 { groups = "sdhi0_data4", "sdhi0_ctrl"; function = "sdhi0"; @@ -373,6 +378,8 @@ }; &i2c6 { + pinctrl-names = "default"; + pinctrl-0 = <&pmic_irq_pins>; status = "okay"; clock-frequency = <100000>; diff --git a/dts/src/arm/r8a7792-blanche.dts b/dts/src/arm/r8a7792-blanche.dts index b6fa80c3b0..248eb717eb 100644 --- a/dts/src/arm/r8a7792-blanche.dts +++ b/dts/src/arm/r8a7792-blanche.dts @@ -21,7 +21,7 @@ }; chosen { - bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; + bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; stdout-path = "serial0:115200n8"; }; @@ -234,6 +234,11 @@ groups = "du1_rgb666", "du1_sync", "du1_disp"; function = "du1"; }; + + pmic_irq_pins: pmicirq { + groups = "intc_irq2"; + function = "intc"; + }; }; &rwdt { @@ -314,6 +319,8 @@ pmic@58 { compatible = "dlg,da9063"; reg = <0x58>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_irq_pins>; interrupt-parent = <&irqc>; interrupts = <2 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; diff --git a/dts/src/arm/r8a7792-wheat.dts b/dts/src/arm/r8a7792-wheat.dts index f46f4567b3..bd2a63bdab 100644 --- a/dts/src/arm/r8a7792-wheat.dts +++ b/dts/src/arm/r8a7792-wheat.dts @@ -20,7 +20,7 @@ }; chosen { - bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; + bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; stdout-path = "serial0:115200n8"; }; diff --git a/dts/src/arm/r8a7792.dtsi b/dts/src/arm/r8a7792.dtsi index 38fb43d11b..c4ea2d6760 100644 --- a/dts/src/arm/r8a7792.dtsi +++ b/dts/src/arm/r8a7792.dtsi @@ -875,6 +875,40 @@ compatible = "renesas,prr"; reg = <0 0xff000044 0 4>; }; + + cmt0: timer@ffca0000 { + compatible = "renesas,r8a7792-cmt0", + "renesas,rcar-gen2-cmt0"; + reg = <0 0xffca0000 0 0x1004>; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 124>; + clock-names = "fck"; + power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 124>; + + status = "disabled"; + }; + + cmt1: timer@e6130000 { + compatible = "renesas,r8a7792-cmt1", + "renesas,rcar-gen2-cmt1"; + reg = <0 0xe6130000 0 0x1004>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 329>; + clock-names = "fck"; + power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 329>; + + status = "disabled"; + }; }; timer { diff --git a/dts/src/arm/r8a7793-gose.dts b/dts/src/arm/r8a7793-gose.dts index f51601af89..42f3313e69 100644 --- a/dts/src/arm/r8a7793-gose.dts +++ b/dts/src/arm/r8a7793-gose.dts @@ -52,7 +52,7 @@ }; chosen { - bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; + bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; stdout-path = "serial0:115200n8"; }; @@ -514,6 +514,11 @@ function = "intc"; }; + pmic_irq_pins: pmicirq { + groups = "intc_irq2"; + function = "intc"; + }; + sdhi0_pins: sd0 { groups = "sdhi0_data4", "sdhi0_ctrl"; function = "sdhi0"; @@ -711,6 +716,8 @@ }; &i2c6 { + pinctrl-names = "default"; + pinctrl-0 = <&pmic_irq_pins>; status = "okay"; clock-frequency = <100000>; diff --git a/dts/src/arm/r8a7794-alt.dts b/dts/src/arm/r8a7794-alt.dts index 0ab3d8d57f..1d22fcdc5d 100644 --- a/dts/src/arm/r8a7794-alt.dts +++ b/dts/src/arm/r8a7794-alt.dts @@ -22,7 +22,7 @@ }; chosen { - bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; + bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; stdout-path = "serial0:115200n8"; }; diff --git a/dts/src/arm/r8a7794-silk.dts b/dts/src/arm/r8a7794-silk.dts index 60e91ebfa6..b3177aea45 100644 --- a/dts/src/arm/r8a7794-silk.dts +++ b/dts/src/arm/r8a7794-silk.dts @@ -34,7 +34,7 @@ }; chosen { - bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; + bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; stdout-path = "serial0:115200n8"; }; diff --git a/dts/src/arm/rk322x.dtsi b/dts/src/arm/rk322x.dtsi index da102fff96..340ed6ccb0 100644 --- a/dts/src/arm/rk322x.dtsi +++ b/dts/src/arm/rk322x.dtsi @@ -143,6 +143,11 @@ #clock-cells = <0>; }; + display_subsystem: display-subsystem { + compatible = "rockchip,display-subsystem"; + ports = <&vop_out>; + }; + i2s1: i2s1@100b0000 { compatible = "rockchip,rk3228-i2s", "rockchip,rk3066-i2s"; reg = <0x100b0000 0x4000>; @@ -529,6 +534,17 @@ status = "disabled"; }; + hdmi_phy: hdmi-phy@12030000 { + compatible = "rockchip,rk3228-hdmi-phy"; + reg = <0x12030000 0x10000>; + clocks = <&cru PCLK_HDMI_PHY>, <&xin24m>, <&cru DCLK_HDMI_PHY>; + clock-names = "sysclk", "refoclk", "refpclk"; + #clock-cells = <0>; + clock-output-names = "hdmiphy_phy"; + #phy-cells = <0>; + status = "disabled"; + }; + gpu: gpu@20000000 { compatible = "rockchip,rk3228-mali", "arm,mali-400"; reg = <0x20000000 0x10000>; @@ -572,6 +588,28 @@ status = "disabled"; }; + vop: vop@20050000 { + compatible = "rockchip,rk3228-vop"; + reg = <0x20050000 0x1ffc>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru ACLK_VOP>, <&cru DCLK_VOP>, <&cru HCLK_VOP>; + clock-names = "aclk_vop", "dclk_vop", "hclk_vop"; + resets = <&cru SRST_VOP_A>, <&cru SRST_VOP_H>, <&cru SRST_VOP_D>; + reset-names = "axi", "ahb", "dclk"; + iommus = <&vop_mmu>; + status = "disabled"; + + vop_out: port { + #address-cells = <1>; + #size-cells = <0>; + + vop_out_hdmi: endpoint@0 { + reg = <0>; + remote-endpoint = <&hdmi_in_vop>; + }; + }; + }; + vop_mmu: iommu@20053f00 { compatible = "rockchip,iommu"; reg = <0x20053f00 0x100>; @@ -579,7 +617,7 @@ interrupt-names = "vop_mmu"; clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>; clock-names = "aclk", "iface"; - iommu-cells = <0>; + #iommu-cells = <0>; status = "disabled"; }; @@ -594,6 +632,36 @@ status = "disabled"; }; + hdmi: hdmi@200a0000 { + compatible = "rockchip,rk3228-dw-hdmi"; + reg = <0x200a0000 0x20000>; + reg-io-width = <4>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + assigned-clocks = <&cru SCLK_HDMI_PHY>; + assigned-clock-parents = <&hdmi_phy>; + clocks = <&cru SCLK_HDMI_HDCP>, <&cru PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_CEC>; + clock-names = "isfr", "iahb", "cec"; + pinctrl-names = "default"; + pinctrl-0 = <&hdmii2c_xfer &hdmi_hpd &hdmi_cec>; + resets = <&cru SRST_HDMI_P>; + reset-names = "hdmi"; + phys = <&hdmi_phy>; + phy-names = "hdmi"; + rockchip,grf = <&grf>; + status = "disabled"; + + ports { + hdmi_in: port { + #address-cells = <1>; + #size-cells = <0>; + hdmi_in_vop: endpoint@0 { + reg = <0>; + remote-endpoint = <&vop_out_hdmi>; + }; + }; + }; + }; + sdmmc: dwmmc@30000000 { compatible = "rockchip,rk3228-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x30000000 0x4000>; @@ -922,6 +990,21 @@ }; }; + hdmi { + hdmi_hpd: hdmi-hpd { + rockchip,pins = <0 RK_PB7 1 &pcfg_pull_down>; + }; + + hdmii2c_xfer: hdmii2c-xfer { + rockchip,pins = <0 RK_PA6 2 &pcfg_pull_none>, + <0 RK_PA7 2 &pcfg_pull_none>; + }; + + hdmi_cec: hdmi-cec { + rockchip,pins = <0 RK_PC4 1 &pcfg_pull_none>; + }; + }; + i2c0 { i2c0_xfer: i2c0-xfer { rockchip,pins = <0 RK_PA0 1 &pcfg_pull_none>, diff --git a/dts/src/arm/rk3288-veyron-chromebook.dtsi b/dts/src/arm/rk3288-veyron-chromebook.dtsi index fbef345781..1cadb522fd 100644 --- a/dts/src/arm/rk3288-veyron-chromebook.dtsi +++ b/dts/src/arm/rk3288-veyron-chromebook.dtsi @@ -70,6 +70,21 @@ pinctrl-0 = <&ac_present_ap>; }; + lid_switch: lid-switch { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&ap_lid_int_l>; + + lid { + label = "Lid"; + gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>; + wakeup-source; + linux,code = <SW_LID>; + linux,input-type = <EV_SW>; + debounce-interval = <1>; + }; + }; + panel: panel { compatible ="innolux,n116bge", "simple-panel"; status = "okay"; @@ -149,18 +164,6 @@ status = "okay"; }; -&gpio_keys { - pinctrl-0 = <&pwr_key_l &ap_lid_int_l>; - lid { - label = "Lid"; - gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>; - wakeup-source; - linux,code = <0>; /* SW_LID */ - linux,input-type = <5>; /* EV_SW */ - debounce-interval = <1>; - }; -}; - &pwm0 { status = "okay"; }; @@ -234,6 +237,7 @@ /* Wake only */ &suspend_l_wake + &bt_dev_wake_awake >; pinctrl-1 = < /* Common for sleep and wake, but no owners */ @@ -243,6 +247,7 @@ /* Sleep only */ &suspend_l_sleep + &bt_dev_wake_sleep >; backlight { diff --git a/dts/src/arm/rk3288-veyron-jaq.dts b/dts/src/arm/rk3288-veyron-jaq.dts index e248f55ee8..fcd119168c 100644 --- a/dts/src/arm/rk3288-veyron-jaq.dts +++ b/dts/src/arm/rk3288-veyron-jaq.dts @@ -135,6 +135,213 @@ pinctrl-0 = <&vcc50_hdmi_en>; }; +&gpio0 { + gpio-line-names = "PMIC_SLEEP_AP", + "DDRIO_PWROFF", + "DDRIO_RETEN", + "TS3A227E_INT_L", + "PMIC_INT_L", + "PWR_KEY_L", + "AP_LID_INT_L", + "EC_IN_RW", + + "AC_PRESENT_AP", + /* + * RECOVERY_SW_L is Chrome OS ABI. Schematics call + * it REC_MODE_L. + */ + "RECOVERY_SW_L", + "OTP_OUT", + "HOST1_PWR_EN", + "USBOTG_PWREN_H", + "AP_WARM_RESET_H", + "nFALUT2", + "I2C0_SDA_PMIC", + + "I2C0_SCL_PMIC", + "SUSPEND_L", + "USB_INT"; +}; + +&gpio2 { + gpio-line-names = "CONFIG0", + "CONFIG1", + "CONFIG2", + "", + "", + "", + "", + "CONFIG3", + + "", + "EMMC_RST_L", + "", + "", + "BL_PWR_EN", + "AVDD_1V8_DISP_EN"; +}; + +&gpio3 { + gpio-line-names = "FLASH0_D0", + "FLASH0_D1", + "FLASH0_D2", + "FLASH0_D3", + "FLASH0_D4", + "FLASH0_D5", + "FLASH0_D6", + "FLASH0_D7", + + "", + "", + "", + "", + "", + "", + "", + "", + + "FLASH0_CS2/EMMC_CMD", + "", + "FLASH0_DQS/EMMC_CLKO"; +}; + +&gpio4 { + gpio-line-names = "", + "", + "", + "", + "", + "", + "", + "", + + "", + "", + "", + "", + "", + "", + "", + "", + + "UART0_RXD", + "UART0_TXD", + "UART0_CTS", + "UART0_RTS", + "SDIO0_D0", + "SDIO0_D1", + "SDIO0_D2", + "SDIO0_D3", + + "SDIO0_CMD", + "SDIO0_CLK", + "BT_DEV_WAKE", /* Maybe missing from mighty? */ + "", + "WIFI_ENABLE_H", + "BT_ENABLE_L", + "WIFI_HOST_WAKE", + "BT_HOST_WAKE"; +}; + +&gpio5 { + gpio-line-names = "", + "", + "", + "", + "", + "", + "", + "", + + "", + "", + "", + "", + "SPI0_CLK", + "SPI0_CS0", + "SPI0_TXD", + "SPI0_RXD", + + "", + "", + "", + "VCC50_HDMI_EN"; +}; + +&gpio6 { + gpio-line-names = "I2S0_SCLK", + "I2S0_LRCK_RX", + "I2S0_LRCK_TX", + "I2S0_SDI", + "I2S0_SDO0", + "HP_DET_H", + "ALS_INT", + "INT_CODEC", + + "I2S0_CLK", + "I2C2_SDA", + "I2C2_SCL", + "MICDET", + "", + "", + "", + "", + + "SDMMC_D0", + "SDMMC_D1", + "SDMMC_D2", + "SDMMC_D3", + "SDMMC_CLK", + "SDMMC_CMD"; +}; + +&gpio7 { + gpio-line-names = "LCDC_BL", + "PWM_LOG", + "BL_EN", + "TRACKPAD_INT", + "TPM_INT_H", + "SDMMC_DET_L", + /* + * AP_FLASH_WP_L is Chrome OS ABI. Schematics call + * it FW_WP_AP. + */ + "AP_FLASH_WP_L", + "EC_INT", + + "CPU_NMI", + "DVSOK", + "SDMMC_WP", /* mighty only */ + "EDP_HPD", + "DVS1", + "nFALUT1", /* nFAULT1 on jaq */ + "LCD_EN", + "DVS2", + + "VCC5V_GOOD_H", + "I2C4_SDA_TP", + "I2C4_SCL_TP", + "I2C5_SDA_HDMI", + "I2C5_SCL_HDMI", + "5V_DRV", + "UART2_RXD", + "UART2_TXD"; +}; + +&gpio8 { + gpio-line-names = "RAM_ID0", + "RAM_ID1", + "RAM_ID2", + "RAM_ID3", + "I2C1_SDA_TPM", + "I2C1_SCL_TPM", + "SPI2_CLK", + "SPI2_CS0", + + "SPI2_RXD", + "SPI2_TXD"; +}; + &pinctrl { backlight { bl_pwr_en: bl_pwr_en { diff --git a/dts/src/arm/rk3288-veyron-jerry.dts b/dts/src/arm/rk3288-veyron-jerry.dts index b1613af83d..164561f04c 100644 --- a/dts/src/arm/rk3288-veyron-jerry.dts +++ b/dts/src/arm/rk3288-veyron-jerry.dts @@ -103,6 +103,213 @@ pinctrl-0 = <&vcc50_hdmi_en>; }; +&gpio0 { + gpio-line-names = "PMIC_SLEEP_AP", + "DDRIO_PWROFF", + "DDRIO_RETEN", + "TS3A227E_INT_L", + "PMIC_INT_L", + "PWR_KEY_L", + "AP_LID_INT_L", + "EC_IN_RW", + + "AC_PRESENT_AP", + /* + * RECOVERY_SW_L is Chrome OS ABI. Schematics call + * it REC_MODE_L. + */ + "RECOVERY_SW_L", + "OTP_OUT", + "HOST1_PWR_EN", + "USBOTG_PWREN_H", + "AP_WARM_RESET_H", + "nFAULT2", + "I2C0_SDA_PMIC", + + "I2C0_SCL_PMIC", + "SUSPEND_L", + "USB_INT"; +}; + +&gpio2 { + gpio-line-names = "CONFIG0", + "CONFIG1", + "CONFIG2", + "", + "", + "", + "", + "CONFIG3", + + "", + "EMMC_RST_L", + "", + "", + "BL_PWR_EN", + "AVDD_1V8_DISP_EN"; +}; + +&gpio3 { + gpio-line-names = "FLASH0_D0", + "FLASH0_D1", + "FLASH0_D2", + "FLASH0_D3", + "FLASH0_D4", + "FLASH0_D5", + "FLASH0_D6", + "FLASH0_D7", + + "", + "", + "", + "", + "", + "", + "", + "", + + "FLASH0_CS2/EMMC_CMD", + "", + "FLASH0_DQS/EMMC_CLKO"; +}; + +&gpio4 { + gpio-line-names = "", + "", + "", + "", + "", + "", + "", + "", + + "", + "", + "", + "", + "", + "", + "", + "", + + "UART0_RXD", + "UART0_TXD", + "UART0_CTS", + "UART0_RTS", + "SDIO0_D0", + "SDIO0_D1", + "SDIO0_D2", + "SDIO0_D3", + + "SDIO0_CMD", + "SDIO0_CLK", + "BT_DEV_WAKE", + "", + "WIFI_ENABLE_H", + "BT_ENABLE_L", + "WIFI_HOST_WAKE", + "BT_HOST_WAKE"; +}; + +&gpio5 { + gpio-line-names = "", + "", + "", + "", + "", + "", + "", + "", + + "", + "", + "", + "", + "SPI0_CLK", + "SPI0_CS0", + "SPI0_TXD", + "SPI0_RXD", + + "", + "", + "", + "VCC50_HDMI_EN"; +}; + +&gpio6 { + gpio-line-names = "I2S0_SCLK", + "I2S0_LRCK_RX", + "I2S0_LRCK_TX", + "I2S0_SDI", + "I2S0_SDO0", + "HP_DET_H", + "", + "INT_CODEC", + + "I2S0_CLK", + "I2C2_SDA", + "I2C2_SCL", + "MICDET", + "", + "", + "", + "", + + "SDMMC_D0", + "SDMMC_D1", + "SDMMC_D2", + "SDMMC_D3", + "SDMMC_CLK", + "SDMMC_CMD"; +}; + +&gpio7 { + gpio-line-names = "LCDC_BL", + "PWM_LOG", + "BL_EN", + "TRACKPAD_INT", + "TPM_INT_H", + "SDMMC_DET_L", + /* + * AP_FLASH_WP_L is Chrome OS ABI. Schematics call + * it FW_WP_AP. + */ + "AP_FLASH_WP_L", + "EC_INT", + + "CPU_NMI", + "DVSOK", + "", + "EDP_HPD", + "DVS1", + "nFAULT1", + "LCD_EN", + "DVS2", + + "VCC5V_GOOD_H", + "I2C4_SDA_TP", + "I2C4_SCL_TP", + "I2C5_SDA_HDMI", + "I2C5_SCL_HDMI", + "5V_DRV", + "UART2_RXD", + "UART2_TXD"; +}; + +&gpio8 { + gpio-line-names = "RAM_ID0", + "RAM_ID1", + "RAM_ID2", + "RAM_ID3", + "I2C1_SDA_TPM", + "I2C1_SCL_TPM", + "SPI2_CLK", + "SPI2_CS0", + + "SPI2_RXD", + "SPI2_TXD"; +}; + &pinctrl { backlight { bl_pwr_en: bl_pwr_en { diff --git a/dts/src/arm/rk3288-veyron-mickey.dts b/dts/src/arm/rk3288-veyron-mickey.dts index e852594417..aa352d40c9 100644 --- a/dts/src/arm/rk3288-veyron-mickey.dts +++ b/dts/src/arm/rk3288-veyron-mickey.dts @@ -75,9 +75,7 @@ cooling-maps { /* * After 1st level, throttle the CPU down to as low as 1.4 GHz - * and don't let the GPU go faster than 400 MHz. Note that we - * won't throttle the GPU lower than 400 MHz due to CPU - * heat--we'll let the GPU do the rest itself. + * and don't let the GPU go faster than 400 MHz. */ cpu_warm_limit_cpu { trip = <&cpu_alert_warm>; @@ -86,6 +84,10 @@ <&cpu2 THERMAL_NO_LIMIT 4>, <&cpu3 THERMAL_NO_LIMIT 4>; }; + cpu_warm_limit_gpu { + trip = <&cpu_alert_warm>; + cooling-device = <&gpu 1 1>; + }; /* * Add some discrete steps to help throttling system deal @@ -125,11 +127,80 @@ <&cpu2 8 THERMAL_NO_LIMIT>, <&cpu3 8 THERMAL_NO_LIMIT>; }; + + /* At very hot, don't let GPU go over 300 MHz */ + cpu_very_hot_limit_gpu { + trip = <&cpu_alert_very_hot>; + cooling-device = <&gpu 2 2>; + }; }; }; -&emmc { - /delete-property/mmc-hs200-1_8v; +&gpu_thermal { + /delete-node/ trips; + /delete-node/ cooling-maps; + + trips { + gpu_alert_warmish: gpu_alert_warmish { + temperature = <60000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + gpu_alert_warm: gpu_alert_warm { + temperature = <65000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + gpu_alert_hotter: gpu_alert_hotter { + temperature = <84000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + gpu_alert_very_very_hot: gpu_alert_very_very_hot { + temperature = <86000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + gpu_crit: gpu_crit { + temperature = <90000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "critical"; + }; + }; + + cooling-maps { + /* After 1st level throttle the GPU down to as low as 400 MHz */ + gpu_warmish_limit_gpu { + trip = <&gpu_alert_warmish>; + cooling-device = <&gpu THERMAL_NO_LIMIT 1>; + }; + + /* + * Slightly after we throttle the GPU, we'll also make sure that + * the CPU can't go faster than 1.4 GHz. Note that we won't + * throttle the CPU lower than 1.4 GHz due to GPU heat--we'll + * let the CPU do the rest itself. + */ + gpu_warm_limit_cpu { + trip = <&gpu_alert_warm>; + cooling-device = <&cpu0 4 4>, + <&cpu1 4 4>, + <&cpu2 4 4>, + <&cpu3 4 4>; + }; + + /* When hot, GPU goes down to 300 MHz */ + gpu_hotter_limit_gpu { + trip = <&gpu_alert_hotter>; + cooling-device = <&gpu 2 2>; + }; + + /* When really hot, don't let GPU go _above_ 300 MHz */ + gpu_very_very_hot_limit_gpu { + trip = <&gpu_alert_very_very_hot>; + cooling-device = <&gpu 2 THERMAL_NO_LIMIT>; + }; + }; }; &i2c2 { @@ -142,8 +213,6 @@ &i2s { status = "okay"; - clock-names = "i2s_hclk", "i2s_clk", "i2s_clk_out"; - clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>, <&cru SCLK_I2S0_OUT>; }; &rk808 { @@ -183,6 +252,157 @@ }; }; +&gpio0 { + gpio-line-names = "PMIC_SLEEP_AP", + "", + "", + "", + "PMIC_INT_L", + "POWER_BUTTON_L", + "", + "", + + "", + /* + * RECOVERY_SW_L is Chrome OS ABI. Schematics call + * it REC_MODE_L. + */ + "RECOVERY_SW_L", + "OT_RESET", + "", + "", + "AP_WARM_RESET_H", + "", + "I2C0_SDA_PMIC", + + "I2C0_SCL_PMIC", + "", + "nFALUT"; +}; + +&gpio2 { + gpio-line-names = "CONFIG0", + "CONFIG1", + "CONFIG2", + "", + "", + "", + "", + "CONFIG3", + + "", + "EMMC_RST_L"; +}; + +&gpio3 { + gpio-line-names = "FLASH0_D0", + "FLASH0_D1", + "FLASH0_D2", + "FLASH0_D3", + "FLASH0_D4", + "FLASH0_D5", + "FLASH0_D6", + "FLASH0_D7", + + "", + "", + "", + "", + "", + "", + "", + "", + + "FLASH0_CS2/EMMC_CMD", + "", + "FLASH0_DQS/EMMC_CLKO"; +}; + +&gpio4 { + gpio-line-names = "", + "", + "", + "", + "", + "", + "", + "", + + "", + "", + "", + "", + "", + "", + "", + "", + + "UART0_RXD", + "UART0_TXD", + "UART0_CTS_L", + "UART0_RTS_L", + "SDIO0_D0", + "SDIO0_D1", + "SDIO0_D2", + "SDIO0_D3", + + "SDIO0_CMD", + "SDIO0_CLK", + "BT_DEV_WAKE", + "", + "WIFI_ENABLE_H", + "BT_ENABLE_L", + "WIFI_HOST_WAKE", + "BT_HOST_WAKE"; +}; + +&gpio7 { + gpio-line-names = "", + "PWM_LOG", + "", + "", + "TPM_INT_H", + "SDMMC_DET_L", + /* + * AP_FLASH_WP_L is Chrome OS ABI. Schematics call + * it FW_WP_AP. + */ + "AP_FLASH_WP_L", + "", + + "CPU_NMI", + "DVSOK", + "HDMI_WAKE", + "POWER_HDMI_ON", + "DVS1", + "", + "", + "DVS2", + + "HDMI_CEC", + "", + "", + "I2C5_SDA_HDMI", + "I2C5_SCL_HDMI", + "", + "UART2_RXD", + "UART2_TXD"; +}; + +&gpio8 { + gpio-line-names = "RAM_ID0", + "RAM_ID1", + "RAM_ID2", + "RAM_ID3", + "I2C1_SDA_TPM", + "I2C1_SCL_TPM", + "SPI2_CLK", + "SPI2_CS0", + + "SPI2_RXD", + "SPI2_TXD"; +}; + &pinctrl { hdmi { power_hdmi_on: power-hdmi-on { diff --git a/dts/src/arm/rk3288-veyron-minnie.dts b/dts/src/arm/rk3288-veyron-minnie.dts index 468a181854..9008e703c0 100644 --- a/dts/src/arm/rk3288-veyron-minnie.dts +++ b/dts/src/arm/rk3288-veyron-minnie.dts @@ -48,6 +48,26 @@ regulator-boot-on; vin-supply = <&vcc18_wl>; }; + + volume_buttons: volume-buttons { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&volum_down_l &volum_up_l>; + + volum_down { + label = "Volum_down"; + gpios = <&gpio5 RK_PB3 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEDOWN>; + debounce-interval = <100>; + }; + + volum_up { + label = "Volum_up"; + gpios = <&gpio5 RK_PB2 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + debounce-interval = <100>; + }; + }; }; &backlight { @@ -86,30 +106,6 @@ 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255>; power-supply = <&backlight_regulator>; - post-pwm-on-delay-ms = <200>; - pwm-off-delay-ms = <200>; -}; - -&emmc { - /delete-property/mmc-hs200-1_8v; -}; - -&gpio_keys { - pinctrl-0 = <&pwr_key_l &ap_lid_int_l &volum_down_l &volum_up_l>; - - volum_down { - label = "Volum_down"; - gpios = <&gpio5 RK_PB3 GPIO_ACTIVE_LOW>; - linux,code = <KEY_VOLUMEDOWN>; - debounce-interval = <100>; - }; - - volum_up { - label = "Volum_up"; - gpios = <&gpio5 RK_PB2 GPIO_ACTIVE_LOW>; - linux,code = <KEY_VOLUMEUP>; - debounce-interval = <100>; - }; }; &i2c_tunnel { @@ -188,6 +184,218 @@ pinctrl-0 = <&vcc50_hdmi_en>; }; +&gpio0 { + gpio-line-names = "PMIC_SLEEP_AP", + "DDRIO_PWROFF", + "DDRIO_RETEN", + "TS3A227E_INT_L", + "PMIC_INT_L", + "PWR_KEY_L", + "AP_LID_INT_L", + "EC_IN_RW", + + "AC_PRESENT_AP", + /* + * RECOVERY_SW_L is Chrome OS ABI. Schematics call + * it REC_MODE_L. + */ + "RECOVERY_SW_L", + "OTP_OUT", + "HOST1_PWR_EN", + "USBOTG_PWREN_H", + "AP_WARM_RESET_H", + "nFALUT2", + "I2C0_SDA_PMIC", + + "I2C0_SCL_PMIC", + "SUSPEND_L", + "USB_INT"; +}; + +&gpio2 { + gpio-line-names = "CONFIG0", + "CONFIG1", + "CONFIG2", + "", + "", + "", + "", + "CONFIG3", + + "PROCHOT#", + "EMMC_RST_L", + "", + "", + "BL_PWR_EN", + "AVDD_1V8_DISP_EN", + "TOUCH_INT", + "TOUCH_RST", + + "I2C3_SCL_TP", + "I2C3_SDA_TP"; +}; + +&gpio3 { + gpio-line-names = "FLASH0_D0", + "FLASH0_D1", + "FLASH0_D2", + "FLASH0_D3", + "FLASH0_D4", + "FLASH0_D5", + "FLASH0_D6", + "FLASH0_D7", + + "", + "", + "", + "", + "", + "", + "", + "", + + "FLASH0_CS2/EMMC_CMD", + "", + "FLASH0_DQS/EMMC_CLKO"; +}; + +&gpio4 { + gpio-line-names = "", + "", + "", + "", + "", + "", + "", + "", + + "", + "", + "", + "", + "", + "", + "", + "", + + "UART0_RXD", + "UART0_TXD", + "UART0_CTS", + "UART0_RTS", + "SDIO0_D0", + "SDIO0_D1", + "SDIO0_D2", + "SDIO0_D3", + + "SDIO0_CMD", + "SDIO0_CLK", + "dev_wake", + "", + "WIFI_ENABLE_H", + "BT_ENABLE_L", + "WIFI_HOST_WAKE", + "BT_HOST_WAKE"; +}; + +&gpio5 { + gpio-line-names = "", + "", + "", + "", + "", + "", + "", + "", + + "", + "", + "Volum_Up#", + "Volum_Down#", + "SPI0_CLK", + "SPI0_CS0", + "SPI0_TXD", + "SPI0_RXD", + + "", + "", + "", + "VCC50_HDMI_EN"; +}; + +&gpio6 { + gpio-line-names = "I2S0_SCLK", + "I2S0_LRCK_RX", + "I2S0_LRCK_TX", + "I2S0_SDI", + "I2S0_SDO0", + "HP_DET_H", + "", + "INT_CODEC", + + "I2S0_CLK", + "I2C2_SDA", + "I2C2_SCL", + "MICDET", + "", + "", + "", + "", + + "SDMMC_D0", + "SDMMC_D1", + "SDMMC_D2", + "SDMMC_D3", + "SDMMC_CLK", + "SDMMC_CMD"; +}; + +&gpio7 { + gpio-line-names = "LCDC_BL", + "PWM_LOG", + "BL_EN", + "TRACKPAD_INT", + "TPM_INT_H", + "SDMMC_DET_L", + /* + * AP_FLASH_WP_L is Chrome OS ABI. Schematics call + * it FW_WP_AP. + */ + "AP_FLASH_WP_L", + "EC_INT", + + "CPU_NMI", + "DVS_OK", + "SDMMC_WP", + "EDP_HPD", + "DVS1", + "nFALUT1", + "LCD_EN", + "DVS2", + + "VCC5V_GOOD_H", + "I2C4_SDA_TP", + "I2C4_SCL_TP", + "I2C5_SDA_HDMI", + "I2C5_SCL_HDMI", + "5V_DRV", + "UART2_RXD", + "UART2_TXD"; +}; + +&gpio8 { + gpio-line-names = "RAM_ID0", + "RAM_ID1", + "RAM_ID2", + "RAM_ID3", + "I2C1_SDA_TPM", + "I2C1_SCL_TPM", + "SPI2_CLK", + "SPI2_CS0", + + "SPI2_RXD", + "SPI2_TXD"; +}; + &pinctrl { backlight { bl_pwr_en: bl_pwr_en { diff --git a/dts/src/arm/rk3288-veyron-pinky.dts b/dts/src/arm/rk3288-veyron-pinky.dts index 9645be7b3d..9b6f4d9b03 100644 --- a/dts/src/arm/rk3288-veyron-pinky.dts +++ b/dts/src/arm/rk3288-veyron-pinky.dts @@ -35,7 +35,7 @@ force-hpd; }; -&gpio_keys { +&lid_switch { pinctrl-0 = <&pwr_key_h &ap_lid_int_l>; power { diff --git a/dts/src/arm/rk3288-veyron-speedy.dts b/dts/src/arm/rk3288-veyron-speedy.dts index 2ac8748a3a..9b140db044 100644 --- a/dts/src/arm/rk3288-veyron-speedy.dts +++ b/dts/src/arm/rk3288-veyron-speedy.dts @@ -64,6 +64,10 @@ temperature = <70000>; }; +&cpu_crit { + temperature = <90000>; +}; + &edp { /delete-property/pinctrl-names; /delete-property/pinctrl-0; @@ -71,6 +75,14 @@ force-hpd; }; +&gpu_alert0 { + temperature = <80000>; +}; + +&gpu_crit { + temperature = <90000>; +}; + &panel { power-supply= <&panel_regulator>; }; @@ -101,6 +113,213 @@ pinctrl-0 = <&vcc50_hdmi_en>; }; +&gpio0 { + gpio-line-names = "PMIC_SLEEP_AP", + "DDRIO_PWROFF", + "DDRIO_RETEN", + "TS3A227E_INT_L", + "PMIC_INT_L", + "PWR_KEY_L", + "AP_LID_INT_L", + "EC_IN_RW", + + "AC_PRESENT_AP", + /* + * RECOVERY_SW_L is Chrome OS ABI. Schematics call + * it REC_MODE_L. + */ + "RECOVERY_SW_L", + "OTP_OUT", + "HOST1_PWR_EN", + "USBOTG_PWREN_H", + "AP_WARM_RESET_H", + "nFALUT2", + "I2C0_SDA_PMIC", + + "I2C0_SCL_PMIC", + "SUSPEND_L", + "USB_INT"; +}; + +&gpio2 { + gpio-line-names = "CONFIG0", + "CONFIG1", + "CONFIG2", + "", + "", + "", + "", + "CONFIG3", + + "PWRLIMIT#_CPU", + "EMMC_RST_L", + "", + "", + "BL_PWR_EN", + "AVDD_1V8_DISP_EN"; +}; + +&gpio3 { + gpio-line-names = "FLASH0_D0", + "FLASH0_D1", + "FLASH0_D2", + "FLASH0_D3", + "FLASH0_D4", + "FLASH0_D5", + "FLASH0_D6", + "FLASH0_D7", + + "", + "", + "", + "", + "", + "", + "", + "", + + "FLASH0_CS2/EMMC_CMD", + "", + "FLASH0_DQS/EMMC_CLKO"; +}; + +&gpio4 { + gpio-line-names = "", + "", + "", + "", + "", + "", + "", + "", + + "", + "", + "", + "", + "", + "", + "", + "", + + "UART0_RXD", + "UART0_TXD", + "UART0_CTS", + "UART0_RTS", + "SDIO0_D0", + "SDIO0_D1", + "SDIO0_D2", + "SDIO0_D3", + + "SDIO0_CMD", + "SDIO0_CLK", + "BT_DEV_WAKE", + "", + "WIFI_ENABLE_H", + "BT_ENABLE_L", + "WIFI_HOST_WAKE", + "BT_HOST_WAKE"; +}; + +&gpio5 { + gpio-line-names = "", + "", + "", + "", + "", + "", + "", + "", + + "", + "", + "", + "", + "SPI0_CLK", + "SPI0_CS0", + "SPI0_TXD", + "SPI0_RXD", + + "", + "", + "", + "VCC50_HDMI_EN"; +}; + +&gpio6 { + gpio-line-names = "I2S0_SCLK", + "I2S0_LRCK_RX", + "I2S0_LRCK_TX", + "I2S0_SDI", + "I2S0_SDO0", + "HP_DET_H", + "ALS_INT", /* not connected */ + "INT_CODEC", + + "I2S0_CLK", + "I2C2_SDA", + "I2C2_SCL", + "MICDET", + "", + "", + "", + "", + + "SDMMC_D0", + "SDMMC_D1", + "SDMMC_D2", + "SDMMC_D3", + "SDMMC_CLK", + "SDMMC_CMD"; +}; + +&gpio7 { + gpio-line-names = "LCDC_BL", + "PWM_LOG", + "BL_EN", + "TRACKPAD_INT", + "TPM_INT_H", + "SDMMC_DET_L", + /* + * AP_FLASH_WP_L is Chrome OS ABI. Schematics call + * it FW_WP_AP. + */ + "AP_FLASH_WP_L", + "EC_INT", + + "CPU_NMI", + "DVS_OK", + "", + "EDP_HOTPLUG", + "DVS1", + "nFALUT1", + "LCD_EN", + "DVS2", + + "VCC5V_GOOD_H", + "I2C4_SDA_TP", + "I2C4_SCL_TP", + "I2C5_SDA_HDMI", + "I2C5_SCL_HDMI", + "5V_DRV", + "UART2_RXD", + "UART2_TXD"; +}; + +&gpio8 { + gpio-line-names = "RAM_ID0", + "RAM_ID1", + "RAM_ID2", + "RAM_ID3", + "I2C1_SDA_TPM", + "I2C1_SCL_TPM", + "SPI2_CLK", + "SPI2_CS0", + + "SPI2_RXD", + "SPI2_TXD"; +}; + &pinctrl { backlight { bl_pwr_en: bl_pwr_en { diff --git a/dts/src/arm/rk3288-veyron.dtsi b/dts/src/arm/rk3288-veyron.dtsi index 1252522392..8fc8eac699 100644 --- a/dts/src/arm/rk3288-veyron.dtsi +++ b/dts/src/arm/rk3288-veyron.dtsi @@ -23,11 +23,36 @@ reg = <0x0 0x0 0x0 0x80000000>; }; - gpio_keys: gpio-keys { + bt_activity: bt-activity { compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&bt_host_wake>; + + /* + * HACK: until we have an LPM driver, we'll use an + * ugly GPIO key to allow Bluetooth to wake from S3. + * This is expected to only be used by BT modules that + * use UART for comms. For BT modules that talk over + * SDIO we should use a wakeup mechanism related to SDIO. + * + * Use KEY_RESERVED here since that will work as a wakeup but + * doesn't get reported to higher levels (so doesn't confuse + * Chrome). + */ + bt-wake { + label = "BT Wakeup"; + gpios = <&gpio4 RK_PD7 GPIO_ACTIVE_HIGH>; + linux,code = <KEY_RESERVED>; + wakeup-source; + }; + + }; + power_button: power-button { + compatible = "gpio-keys"; pinctrl-names = "default"; pinctrl-0 = <&pwr_key_l>; + power { label = "Power"; gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; @@ -123,6 +148,10 @@ cpu0-supply = <&vdd_cpu>; }; +&cpu_crit { + temperature = <100000>; +}; + /* rk3288-c used in Veyron Chrome-devices has slightly changed OPPs */ &cpu_opp_table { /delete-node/ opp-312000000; @@ -162,8 +191,18 @@ status = "okay"; }; +&gpu_alert0 { + temperature = <72500>; +}; + +&gpu_crit { + temperature = <100000>; +}; + &hdmi { - ddc-i2c-bus = <&i2c5>; + pinctrl-names = "default", "unwedge"; + pinctrl-0 = <&hdmi_ddc>; + pinctrl-1 = <&hdmi_ddc_unwedge>; status = "okay"; }; @@ -334,14 +373,6 @@ i2c-scl-rising-time-ns = <300>; /* 225ns measured */ }; -&i2c5 { - status = "okay"; - - clock-frequency = <100000>; - i2c-scl-falling-time-ns = <300>; - i2c-scl-rising-time-ns = <1000>; -}; - &io_domains { status = "okay"; @@ -394,6 +425,7 @@ rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */ rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */ + rockchip,hw-tshut-temp = <125000>; }; &uart0 { @@ -424,6 +456,7 @@ &usb_host1 { status = "okay"; + snps,need-phy-for-wake; }; &usb_otg { @@ -432,6 +465,7 @@ assigned-clocks = <&cru SCLK_USBPHY480M_SRC>; assigned-clock-parents = <&usbphy0>; dr_mode = "host"; + snps,need-phy-for-wake; }; &vopb { @@ -453,12 +487,18 @@ &ddr0_retention &ddrio_pwroff &global_pwroff + + /* Wake only */ + &bt_dev_wake_awake >; pinctrl-1 = < /* Common for sleep and wake, but no owners */ &ddr0_retention &ddrio_pwroff &global_pwroff + + /* Sleep only */ + &bt_dev_wake_sleep >; pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma { @@ -542,6 +582,10 @@ rockchip,pins = <4 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; }; + bt_host_wake: bt-host-wake { + rockchip,pins = <4 RK_PD7 RK_FUNC_GPIO &pcfg_pull_down>; + }; + /* * We run sdio0 at max speed; bump up drive strength. * We also have external pulls, so disable the internal ones. @@ -560,6 +604,20 @@ sdio0_clk: sdio0-clk { rockchip,pins = <4 RK_PD1 1 &pcfg_pull_none_drv_8ma>; }; + + /* + * These pins are only present on very new veyron boards; on + * older boards bt_dev_wake is simply always high. Note that + * gpio4_D2 is a NC on old veyron boards, so it doesn't hurt + * to map this pin everywhere + */ + bt_dev_wake_sleep: bt-dev-wake-sleep { + rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_output_low>; + }; + + bt_dev_wake_awake: bt-dev-wake-awake { + rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_output_high>; + }; }; tpm { diff --git a/dts/src/arm/rk3288.dtsi b/dts/src/arm/rk3288.dtsi index aa017abf4f..cc893e154f 100644 --- a/dts/src/arm/rk3288.dtsi +++ b/dts/src/arm/rk3288.dtsi @@ -231,6 +231,7 @@ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; clock-frequency = <24000000>; + arm,no-tick-in-suspend; }; timer: timer@ff810000 { @@ -551,10 +552,7 @@ map0 { trip = <&gpu_alert0>; cooling-device = - <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; }; @@ -682,7 +680,7 @@ #pwm-cells = <3>; pinctrl-names = "default"; pinctrl-0 = <&pwm0_pin>; - clocks = <&cru PCLK_PWM>; + clocks = <&cru PCLK_RKPWM>; clock-names = "pwm"; status = "disabled"; }; @@ -693,7 +691,7 @@ #pwm-cells = <3>; pinctrl-names = "default"; pinctrl-0 = <&pwm1_pin>; - clocks = <&cru PCLK_PWM>; + clocks = <&cru PCLK_RKPWM>; clock-names = "pwm"; status = "disabled"; }; @@ -704,7 +702,7 @@ #pwm-cells = <3>; pinctrl-names = "default"; pinctrl-0 = <&pwm2_pin>; - clocks = <&cru PCLK_PWM>; + clocks = <&cru PCLK_RKPWM>; clock-names = "pwm"; status = "disabled"; }; @@ -712,10 +710,10 @@ pwm3: pwm@ff680030 { compatible = "rockchip,rk3288-pwm"; reg = <0x0 0xff680030 0x0 0x10>; - #pwm-cells = <2>; + #pwm-cells = <3>; pinctrl-names = "default"; pinctrl-0 = <&pwm3_pin>; - clocks = <&cru PCLK_PWM>; + clocks = <&cru PCLK_RKPWM>; clock-names = "pwm"; status = "disabled"; }; @@ -1285,6 +1283,7 @@ interrupt-names = "job", "mmu", "gpu"; clocks = <&cru ACLK_GPU>; operating-points-v2 = <&gpu_opp_table>; + #cooling-cells = <2>; /* min followed by max */ power-domains = <&power RK3288_PD_GPU>; status = "disabled"; }; @@ -1308,10 +1307,6 @@ opp-hz = /bits/ 64 <400000000>; opp-microvolt = <1100000>; }; - opp-500000000 { - opp-hz = /bits/ 64 <500000000>; - opp-microvolt = <1200000>; - }; opp-600000000 { opp-hz = /bits/ 64 <600000000>; opp-microvolt = <1250000>; @@ -1552,6 +1547,15 @@ rockchip,pins = <7 RK_PC3 2 &pcfg_pull_none>, <7 RK_PC4 2 &pcfg_pull_none>; }; + + hdmi_ddc_unwedge: hdmi-ddc-unwedge { + rockchip,pins = <7 RK_PC3 RK_FUNC_GPIO &pcfg_output_low>, + <7 RK_PC4 2 &pcfg_pull_none>; + }; + }; + + pcfg_output_low: pcfg-output-low { + output-low; }; pcfg_pull_up: pcfg-pull-up { diff --git a/dts/src/arm/sama5d3.dtsi b/dts/src/arm/sama5d3.dtsi index 3bbc84bf8d..f770aace0e 100644 --- a/dts/src/arm/sama5d3.dtsi +++ b/dts/src/arm/sama5d3.dtsi @@ -1371,30 +1371,11 @@ status = "disabled"; }; - sckc@fffffe50 { - compatible = "atmel,at91sam9x5-sckc"; + clk32k: sckc@fffffe50 { + compatible = "atmel,sama5d3-sckc"; reg = <0xfffffe50 0x4>; - - slow_rc_osc: slow_rc_osc { - compatible = "atmel,at91sam9x5-clk-slow-rc-osc"; - #clock-cells = <0>; - clock-frequency = <32768>; - clock-accuracy = <50000000>; - atmel,startup-time-usec = <75>; - }; - - slow_osc: slow_osc { - compatible = "atmel,at91sam9x5-clk-slow-osc"; - #clock-cells = <0>; - clocks = <&slow_xtal>; - atmel,startup-time-usec = <1200000>; - }; - - clk32k: slowck { - compatible = "atmel,at91sam9x5-clk-slow"; - #clock-cells = <0>; - clocks = <&slow_rc_osc &slow_osc>; - }; + clocks = <&slow_xtal>; + #clock-cells = <0>; }; rtc@fffffeb0 { diff --git a/dts/src/arm/sh73a0-kzm9g.dts b/dts/src/arm/sh73a0-kzm9g.dts index daac0c6078..1916f31a30 100644 --- a/dts/src/arm/sh73a0-kzm9g.dts +++ b/dts/src/arm/sh73a0-kzm9g.dts @@ -36,7 +36,7 @@ }; chosen { - bootargs = "root=/dev/nfs ip=dhcp ignore_loglevel rw"; + bootargs = "root=/dev/nfs ip=on ignore_loglevel rw"; stdout-path = "serial0:115200n8"; }; diff --git a/dts/src/arm/socfpga_arria10.dtsi b/dts/src/arm/socfpga_arria10.dtsi index ae24599d58..a0a6d85072 100644 --- a/dts/src/arm/socfpga_arria10.dtsi +++ b/dts/src/arm/socfpga_arria10.dtsi @@ -418,7 +418,7 @@ }; gmac0: ethernet@ff800000 { - compatible = "altr,socfpga-stmmac", "snps,dwmac-3.72a", "snps,dwmac"; + compatible = "altr,socfpga-stmmac-a10-s10", "snps,dwmac-3.72a", "snps,dwmac"; altr,sysmgr-syscon = <&sysmgr 0x44 0>; reg = <0xff800000 0x2000>; interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>; @@ -431,15 +431,15 @@ rx-fifo-depth = <16384>; clocks = <&l4_mp_clk>; clock-names = "stmmaceth"; - resets = <&rst EMAC0_RESET>; - reset-names = "stmmaceth"; + resets = <&rst EMAC0_RESET>, <&rst EMAC0_OCP_RESET>; + reset-names = "stmmaceth", "stmmaceth-ocp"; snps,axi-config = <&socfpga_axi_setup>; status = "disabled"; }; gmac1: ethernet@ff802000 { - compatible = "altr,socfpga-stmmac", "snps,dwmac-3.72a", "snps,dwmac"; - altr,sysmgr-syscon = <&sysmgr 0x48 0>; + compatible = "altr,socfpga-stmmac-a10-s10", "snps,dwmac-3.72a", "snps,dwmac"; + altr,sysmgr-syscon = <&sysmgr 0x48 8>; reg = <0xff802000 0x2000>; interrupts = <0 93 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "macirq"; @@ -451,15 +451,15 @@ rx-fifo-depth = <16384>; clocks = <&l4_mp_clk>; clock-names = "stmmaceth"; - resets = <&rst EMAC1_RESET>; - reset-names = "stmmaceth"; + resets = <&rst EMAC1_RESET>, <&rst EMAC1_OCP_RESET>; + reset-names = "stmmaceth", "stmmaceth-ocp"; snps,axi-config = <&socfpga_axi_setup>; status = "disabled"; }; gmac2: ethernet@ff804000 { - compatible = "altr,socfpga-stmmac", "snps,dwmac-3.72a", "snps,dwmac"; - altr,sysmgr-syscon = <&sysmgr 0x4C 0>; + compatible = "altr,socfpga-stmmac-a10-s10", "snps,dwmac-3.72a", "snps,dwmac"; + altr,sysmgr-syscon = <&sysmgr 0x4C 16>; reg = <0xff804000 0x2000>; interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "macirq"; @@ -470,8 +470,9 @@ tx-fifo-depth = <4096>; rx-fifo-depth = <16384>; clocks = <&l4_mp_clk>; - resets = <&rst EMAC2_RESET>; clock-names = "stmmaceth"; + resets = <&rst EMAC2_RESET>, <&rst EMAC2_OCP_RESET>; + reset-names = "stmmaceth", "stmmaceth-ocp"; snps,axi-config = <&socfpga_axi_setup>; status = "disabled"; }; diff --git a/dts/src/arm/socfpga_arria10_socdk.dtsi b/dts/src/arm/socfpga_arria10_socdk.dtsi index 360dae5a5b..0efbeccc5c 100644 --- a/dts/src/arm/socfpga_arria10_socdk.dtsi +++ b/dts/src/arm/socfpga_arria10_socdk.dtsi @@ -48,6 +48,13 @@ }; }; + ref_033v: 033-v-ref { + compatible = "regulator-fixed"; + regulator-name = "0.33V"; + regulator-min-microvolt = <330000>; + regulator-max-microvolt = <330000>; + }; + soc { clkmgr@ffd04000 { clocks { @@ -128,6 +135,18 @@ i2c-sda-falling-time-ns = <6000>; i2c-scl-falling-time-ns = <6000>; + adc@14 { + compatible = "lltc,ltc2497"; + reg = <0x14>; + vref-supply = <&ref_033v>; + }; + + adc@16 { + compatible = "lltc,ltc2497"; + reg = <0x16>; + vref-supply = <&ref_033v>; + }; + eeprom@51 { compatible = "atmel,24c32"; reg = <0x51>; diff --git a/dts/src/arm/stm32746g-eval.dts b/dts/src/arm/stm32746g-eval.dts index d90b0d1e18..2b1664884a 100644 --- a/dts/src/arm/stm32746g-eval.dts +++ b/dts/src/arm/stm32746g-eval.dts @@ -44,6 +44,7 @@ #include "stm32f746.dtsi" #include "stm32f746-pinctrl.dtsi" #include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> / { model = "STMicroelectronics STM32746g-EVAL board"; @@ -69,9 +70,15 @@ gpios = <&gpiof 10 1>; linux,default-trigger = "heartbeat"; }; + orange { + gpios = <&stmfx_pinctrl 17 1>; + }; red { gpios = <&gpiob 7 1>; }; + blue { + gpios = <&stmfx_pinctrl 19 1>; + }; }; gpio_keys { @@ -86,6 +93,43 @@ }; }; + joystick { + compatible = "gpio-keys"; + #size-cells = <0>; + pinctrl-0 = <&joystick_pins>; + pinctrl-names = "default"; + button-0 { + label = "JoySel"; + linux,code = <KEY_ENTER>; + interrupt-parent = <&stmfx_pinctrl>; + interrupts = <0 IRQ_TYPE_EDGE_FALLING>; + }; + button-1 { + label = "JoyDown"; + linux,code = <KEY_DOWN>; + interrupt-parent = <&stmfx_pinctrl>; + interrupts = <1 IRQ_TYPE_EDGE_FALLING>; + }; + button-2 { + label = "JoyLeft"; + linux,code = <KEY_LEFT>; + interrupt-parent = <&stmfx_pinctrl>; + interrupts = <2 IRQ_TYPE_EDGE_FALLING>; + }; + button-3 { + label = "JoyRight"; + linux,code = <KEY_RIGHT>; + interrupt-parent = <&stmfx_pinctrl>; + interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + }; + button-4 { + label = "JoyUp"; + linux,code = <KEY_UP>; + interrupt-parent = <&stmfx_pinctrl>; + interrupts = <4 IRQ_TYPE_EDGE_FALLING>; + }; + }; + usbotg_hs_phy: usb-phy { #phy-cells = <0>; compatible = "usb-nop-xceiv"; @@ -115,6 +159,28 @@ i2c-scl-rising-time-ns = <185>; i2c-scl-falling-time-ns = <20>; status = "okay"; + + stmfx: stmfx@42 { + compatible = "st,stmfx-0300"; + reg = <0x42>; + interrupts = <8 IRQ_TYPE_EDGE_RISING>; + interrupt-parent = <&gpioi>; + + stmfx_pinctrl: stmfx-pin-controller { + compatible = "st,stmfx-0300-pinctrl"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&stmfx_pinctrl 0 0 24>; + + joystick_pins: joystick { + pins = "gpio0", "gpio1", "gpio2", "gpio3", "gpio4"; + drive-push-pull; + bias-pull-up; + }; + }; + }; }; &rtc { diff --git a/dts/src/arm/stm32mp157-pinctrl.dtsi b/dts/src/arm/stm32mp157-pinctrl.dtsi index 85c417d998..df64701335 100644 --- a/dts/src/arm/stm32mp157-pinctrl.dtsi +++ b/dts/src/arm/stm32mp157-pinctrl.dtsi @@ -26,6 +26,7 @@ st,bank-name = "GPIOA"; ngpios = <16>; gpio-ranges = <&pinctrl 0 0 16>; + status = "disabled"; }; gpiob: gpio@50003000 { @@ -38,6 +39,7 @@ st,bank-name = "GPIOB"; ngpios = <16>; gpio-ranges = <&pinctrl 0 16 16>; + status = "disabled"; }; gpioc: gpio@50004000 { @@ -50,6 +52,7 @@ st,bank-name = "GPIOC"; ngpios = <16>; gpio-ranges = <&pinctrl 0 32 16>; + status = "disabled"; }; gpiod: gpio@50005000 { @@ -62,6 +65,7 @@ st,bank-name = "GPIOD"; ngpios = <16>; gpio-ranges = <&pinctrl 0 48 16>; + status = "disabled"; }; gpioe: gpio@50006000 { @@ -74,6 +78,7 @@ st,bank-name = "GPIOE"; ngpios = <16>; gpio-ranges = <&pinctrl 0 64 16>; + status = "disabled"; }; gpiof: gpio@50007000 { @@ -86,6 +91,7 @@ st,bank-name = "GPIOF"; ngpios = <16>; gpio-ranges = <&pinctrl 0 80 16>; + status = "disabled"; }; gpiog: gpio@50008000 { @@ -98,6 +104,7 @@ st,bank-name = "GPIOG"; ngpios = <16>; gpio-ranges = <&pinctrl 0 96 16>; + status = "disabled"; }; gpioh: gpio@50009000 { @@ -110,6 +117,7 @@ st,bank-name = "GPIOH"; ngpios = <16>; gpio-ranges = <&pinctrl 0 112 16>; + status = "disabled"; }; gpioi: gpio@5000a000 { @@ -122,6 +130,7 @@ st,bank-name = "GPIOI"; ngpios = <16>; gpio-ranges = <&pinctrl 0 128 16>; + status = "disabled"; }; gpioj: gpio@5000b000 { @@ -134,6 +143,7 @@ st,bank-name = "GPIOJ"; ngpios = <16>; gpio-ranges = <&pinctrl 0 144 16>; + status = "disabled"; }; gpiok: gpio@5000c000 { @@ -146,6 +156,7 @@ st,bank-name = "GPIOK"; ngpios = <8>; gpio-ranges = <&pinctrl 0 160 8>; + status = "disabled"; }; cec_pins_a: cec-0 { @@ -178,6 +189,47 @@ }; }; + dcmi_pins_a: dcmi-0 { + pins { + pinmux = <STM32_PINMUX('H', 8, AF13)>,/* DCMI_HSYNC */ + <STM32_PINMUX('B', 7, AF13)>,/* DCMI_VSYNC */ + <STM32_PINMUX('A', 6, AF13)>,/* DCMI_PIXCLK */ + <STM32_PINMUX('H', 9, AF13)>,/* DCMI_D0 */ + <STM32_PINMUX('H', 10, AF13)>,/* DCMI_D1 */ + <STM32_PINMUX('H', 11, AF13)>,/* DCMI_D2 */ + <STM32_PINMUX('H', 12, AF13)>,/* DCMI_D3 */ + <STM32_PINMUX('H', 14, AF13)>,/* DCMI_D4 */ + <STM32_PINMUX('I', 4, AF13)>,/* DCMI_D5 */ + <STM32_PINMUX('B', 8, AF13)>,/* DCMI_D6 */ + <STM32_PINMUX('E', 6, AF13)>,/* DCMI_D7 */ + <STM32_PINMUX('I', 1, AF13)>,/* DCMI_D8 */ + <STM32_PINMUX('H', 7, AF13)>,/* DCMI_D9 */ + <STM32_PINMUX('I', 3, AF13)>,/* DCMI_D10 */ + <STM32_PINMUX('H', 15, AF13)>;/* DCMI_D11 */ + bias-disable; + }; + }; + + dcmi_sleep_pins_a: dcmi-sleep-0 { + pins { + pinmux = <STM32_PINMUX('H', 8, ANALOG)>,/* DCMI_HSYNC */ + <STM32_PINMUX('B', 7, ANALOG)>,/* DCMI_VSYNC */ + <STM32_PINMUX('A', 6, ANALOG)>,/* DCMI_PIXCLK */ + <STM32_PINMUX('H', 9, ANALOG)>,/* DCMI_D0 */ + <STM32_PINMUX('H', 10, ANALOG)>,/* DCMI_D1 */ + <STM32_PINMUX('H', 11, ANALOG)>,/* DCMI_D2 */ + <STM32_PINMUX('H', 12, ANALOG)>,/* DCMI_D3 */ + <STM32_PINMUX('H', 14, ANALOG)>,/* DCMI_D4 */ + <STM32_PINMUX('I', 4, ANALOG)>,/* DCMI_D5 */ + <STM32_PINMUX('B', 8, ANALOG)>,/* DCMI_D6 */ + <STM32_PINMUX('E', 6, ANALOG)>,/* DCMI_D7 */ + <STM32_PINMUX('I', 1, ANALOG)>,/* DCMI_D8 */ + <STM32_PINMUX('H', 7, ANALOG)>,/* DCMI_D9 */ + <STM32_PINMUX('I', 3, ANALOG)>,/* DCMI_D10 */ + <STM32_PINMUX('H', 15, ANALOG)>;/* DCMI_D11 */ + }; + }; + ethernet0_rgmii_pins_a: rgmii-0 { pins1 { pinmux = <STM32_PINMUX('G', 5, AF11)>, /* ETH_RGMII_CLK125 */ @@ -241,6 +293,23 @@ }; }; + i2c1_pins_b: i2c1-2 { + pins { + pinmux = <STM32_PINMUX('F', 14, AF5)>, /* I2C1_SCL */ + <STM32_PINMUX('F', 15, AF5)>; /* I2C1_SDA */ + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + i2c1_pins_sleep_b: i2c1-3 { + pins { + pinmux = <STM32_PINMUX('F', 14, ANALOG)>, /* I2C1_SCL */ + <STM32_PINMUX('F', 15, ANALOG)>; /* I2C1_SDA */ + }; + }; + i2c2_pins_a: i2c2-0 { pins { pinmux = <STM32_PINMUX('H', 4, AF4)>, /* I2C2_SCL */ @@ -258,6 +327,21 @@ }; }; + i2c2_pins_b1: i2c2-2 { + pins { + pinmux = <STM32_PINMUX('H', 5, AF4)>; /* I2C2_SDA */ + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + i2c2_pins_sleep_b1: i2c2-3 { + pins { + pinmux = <STM32_PINMUX('H', 5, ANALOG)>; /* I2C2_SDA */ + }; + }; + i2c5_pins_a: i2c5-0 { pins { pinmux = <STM32_PINMUX('A', 11, AF4)>, /* I2C5_SCL */ @@ -276,6 +360,25 @@ }; }; + i2s2_pins_a: i2s2-0 { + pins { + pinmux = <STM32_PINMUX('I', 3, AF5)>, /* I2S2_SDO */ + <STM32_PINMUX('B', 9, AF5)>, /* I2S2_WS */ + <STM32_PINMUX('A', 9, AF5)>; /* I2S2_CK */ + slew-rate = <1>; + drive-push-pull; + bias-disable; + }; + }; + + i2s2_pins_sleep_a: i2s2-1 { + pins { + pinmux = <STM32_PINMUX('I', 3, ANALOG)>, /* I2S2_SDO */ + <STM32_PINMUX('B', 9, ANALOG)>, /* I2S2_WS */ + <STM32_PINMUX('A', 9, ANALOG)>; /* I2S2_CK */ + }; + }; + ltdc_pins_a: ltdc-a-0 { pins { pinmux = <STM32_PINMUX('G', 7, AF14)>, /* LCD_CLK */ @@ -470,6 +573,12 @@ }; }; + qspi_clk_sleep_pins_a: qspi-clk-sleep-0 { + pins { + pinmux = <STM32_PINMUX('F', 10, ANALOG)>; /* QSPI_CLK */ + }; + }; + qspi_bk1_pins_a: qspi-bk1-0 { pins1 { pinmux = <STM32_PINMUX('F', 8, AF10)>, /* QSPI_BK1_IO0 */ @@ -488,6 +597,16 @@ }; }; + qspi_bk1_sleep_pins_a: qspi-bk1-sleep-0 { + pins { + pinmux = <STM32_PINMUX('F', 8, ANALOG)>, /* QSPI_BK1_IO0 */ + <STM32_PINMUX('F', 9, ANALOG)>, /* QSPI_BK1_IO1 */ + <STM32_PINMUX('F', 7, ANALOG)>, /* QSPI_BK1_IO2 */ + <STM32_PINMUX('F', 6, ANALOG)>, /* QSPI_BK1_IO3 */ + <STM32_PINMUX('B', 6, ANALOG)>; /* QSPI_BK1_NCS */ + }; + }; + qspi_bk2_pins_a: qspi-bk2-0 { pins1 { pinmux = <STM32_PINMUX('H', 2, AF9)>, /* QSPI_BK2_IO0 */ @@ -506,6 +625,89 @@ }; }; + qspi_bk2_sleep_pins_a: qspi-bk2-sleep-0 { + pins { + pinmux = <STM32_PINMUX('H', 2, ANALOG)>, /* QSPI_BK2_IO0 */ + <STM32_PINMUX('H', 3, ANALOG)>, /* QSPI_BK2_IO1 */ + <STM32_PINMUX('G', 10, ANALOG)>, /* QSPI_BK2_IO2 */ + <STM32_PINMUX('G', 7, ANALOG)>, /* QSPI_BK2_IO3 */ + <STM32_PINMUX('C', 0, ANALOG)>; /* QSPI_BK2_NCS */ + }; + }; + + sai2a_pins_a: sai2a-0 { + pins { + pinmux = <STM32_PINMUX('I', 5, AF10)>, /* SAI2_SCK_A */ + <STM32_PINMUX('I', 6, AF10)>, /* SAI2_SD_A */ + <STM32_PINMUX('I', 7, AF10)>, /* SAI2_FS_A */ + <STM32_PINMUX('E', 0, AF10)>; /* SAI2_MCLK_A */ + slew-rate = <0>; + drive-push-pull; + bias-disable; + }; + }; + + sai2a_sleep_pins_a: sai2a-1 { + pins { + pinmux = <STM32_PINMUX('I', 5, ANALOG)>, /* SAI2_SCK_A */ + <STM32_PINMUX('I', 6, ANALOG)>, /* SAI2_SD_A */ + <STM32_PINMUX('I', 7, ANALOG)>, /* SAI2_FS_A */ + <STM32_PINMUX('E', 0, ANALOG)>; /* SAI2_MCLK_A */ + }; + }; + + sai2b_pins_a: sai2b-0 { + pins1 { + pinmux = <STM32_PINMUX('E', 12, AF10)>, /* SAI2_SCK_B */ + <STM32_PINMUX('E', 13, AF10)>, /* SAI2_FS_B */ + <STM32_PINMUX('E', 14, AF10)>; /* SAI2_MCLK_B */ + slew-rate = <0>; + drive-push-pull; + bias-disable; + }; + pins2 { + pinmux = <STM32_PINMUX('F', 11, AF10)>; /* SAI2_SD_B */ + bias-disable; + }; + }; + + sai2b_sleep_pins_a: sai2b-1 { + pins { + pinmux = <STM32_PINMUX('F', 11, ANALOG)>, /* SAI2_SD_B */ + <STM32_PINMUX('E', 12, ANALOG)>, /* SAI2_SCK_B */ + <STM32_PINMUX('E', 13, ANALOG)>, /* SAI2_FS_B */ + <STM32_PINMUX('E', 14, ANALOG)>; /* SAI2_MCLK_B */ + }; + }; + + sai2b_pins_b: sai2b-2 { + pins { + pinmux = <STM32_PINMUX('F', 11, AF10)>; /* SAI2_SD_B */ + bias-disable; + }; + }; + + sai2b_sleep_pins_b: sai2b-3 { + pins { + pinmux = <STM32_PINMUX('F', 11, ANALOG)>; /* SAI2_SD_B */ + }; + }; + + sai4a_pins_a: sai4a-0 { + pins { + pinmux = <STM32_PINMUX('B', 5, AF10)>; /* SAI4_SD_A */ + slew-rate = <0>; + drive-push-pull; + bias-disable; + }; + }; + + sai4a_sleep_pins_a: sai4a-1 { + pins { + pinmux = <STM32_PINMUX('B', 5, ANALOG)>; /* SAI4_SD_A */ + }; + }; + sdmmc1_b4_pins_a: sdmmc1-b4-0 { pins { pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */ @@ -599,6 +801,34 @@ bias-disable; }; }; + + uart4_pins_b: uart4-1 { + pins1 { + pinmux = <STM32_PINMUX('D', 1, AF8)>; /* UART4_TX */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */ + bias-disable; + }; + }; + + uart7_pins_a: uart7-0 { + pins1 { + pinmux = <STM32_PINMUX('E', 8, AF7)>; /* UART4_TX */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32_PINMUX('E', 7, AF7)>, /* UART4_RX */ + <STM32_PINMUX('E', 10, AF7)>, /* UART4_CTS */ + <STM32_PINMUX('E', 9, AF7)>; /* UART4_RTS */ + bias-disable; + }; + }; }; pinctrl_z: pin-controller-z@54004000 { @@ -621,6 +851,22 @@ st,bank-ioport = <11>; ngpios = <8>; gpio-ranges = <&pinctrl_z 0 400 8>; + status = "disabled"; + }; + + i2c2_pins_b2: i2c2-0 { + pins { + pinmux = <STM32_PINMUX('Z', 0, AF3)>; /* I2C2_SCL */ + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + i2c2_pins_sleep_b2: i2c2-1 { + pins { + pinmux = <STM32_PINMUX('Z', 0, ANALOG)>; /* I2C2_SCL */ + }; }; i2c4_pins_a: i2c4-0 { diff --git a/dts/src/arm/stm32mp157a-avenger96.dts b/dts/src/arm/stm32mp157a-avenger96.dts new file mode 100644 index 0000000000..2e4742c53d --- /dev/null +++ b/dts/src/arm/stm32mp157a-avenger96.dts @@ -0,0 +1,321 @@ +// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) +/* + * Copyright (C) Linaro Ltd 2019 - All Rights Reserved + * Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + */ + +/dts-v1/; + +#include "stm32mp157c.dtsi" +#include "stm32mp157xac-pinctrl.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/mfd/st,stpmic1.h> + +/ { + model = "Arrow Electronics STM32MP157A Avenger96 board"; + compatible = "arrow,stm32mp157a-avenger96", "st,stm32mp157"; + + aliases { + ethernet0 = ðernet0; + mmc0 = &sdmmc1; + serial0 = &uart4; + serial1 = &uart7; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@c0000000 { + device_type = "memory"; + reg = <0xc0000000 0x40000000>; + }; + + led { + compatible = "gpio-leds"; + led1 { + label = "green:user1"; + gpios = <&gpioz 7 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + + led2 { + label = "green:user2"; + gpios = <&gpiof 3 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc0"; + default-state = "off"; + }; + + led3 { + label = "green:user3"; + gpios = <&gpiog 0 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc1"; + default-state = "off"; + }; + + led4 { + label = "green:user3"; + gpios = <&gpiog 1 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "none"; + default-state = "off"; + panic-indicator; + }; + + led5 { + label = "yellow:wifi"; + gpios = <&gpioz 3 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy0tx"; + default-state = "off"; + }; + + led6 { + label = "blue:bt"; + gpios = <&gpioz 6 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "bluetooth-power"; + default-state = "off"; + }; + }; +}; + +ðernet0 { + status = "okay"; + pinctrl-0 = <ðernet0_rgmii_pins_a>; + pinctrl-1 = <ðernet0_rgmii_pins_sleep_a>; + pinctrl-names = "default", "sleep"; + phy-mode = "rgmii"; + max-speed = <1000>; + phy-handle = <&phy0>; + + mdio0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + phy0: ethernet-phy@7 { + reg = <7>; + }; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_b>; + i2c-scl-rising-time-ns = <185>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; + /delete-property/dmas; + /delete-property/dma-names; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_b1 &i2c2_pins_b2>; + i2c-scl-rising-time-ns = <185>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; + /delete-property/dmas; + /delete-property/dma-names; +}; + +&i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_pins_a>; + i2c-scl-rising-time-ns = <185>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; + /delete-property/dmas; + /delete-property/dma-names; + + pmic: stpmic@33 { + compatible = "st,stpmic1"; + reg = <0x33>; + interrupts-extended = <&exti 55 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + status = "okay"; + + st,main-control-register = <0x04>; + st,vin-control-register = <0xc0>; + st,usb-control-register = <0x30>; + + regulators { + compatible = "st,stpmic1-regulators"; + + ldo1-supply = <&v3v3>; + ldo2-supply = <&v3v3>; + ldo3-supply = <&vdd_ddr>; + ldo5-supply = <&v3v3>; + ldo6-supply = <&v3v3>; + pwr_sw1-supply = <&bst_out>; + pwr_sw2-supply = <&bst_out>; + + vddcore: buck1 { + regulator-name = "vddcore"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + vdd_ddr: buck2 { + regulator-name = "vdd_ddr"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + vdd: buck3 { + regulator-name = "vdd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + st,mask_reset; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + v3v3: buck4 { + regulator-name = "v3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-over-current-protection; + regulator-initial-mode = <0>; + }; + + vdda: ldo1 { + regulator-name = "vdda"; + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + interrupts = <IT_CURLIM_LDO1 0>; + interrupt-parent = <&pmic>; + }; + + v2v8: ldo2 { + regulator-name = "v2v8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + interrupts = <IT_CURLIM_LDO2 0>; + interrupt-parent = <&pmic>; + }; + + vtt_ddr: ldo3 { + regulator-name = "vtt_ddr"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <750000>; + regulator-always-on; + regulator-over-current-protection; + }; + + vdd_usb: ldo4 { + regulator-name = "vdd_usb"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + interrupts = <IT_CURLIM_LDO4 0>; + interrupt-parent = <&pmic>; + }; + + vdd_sd: ldo5 { + regulator-name = "vdd_sd"; + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + interrupts = <IT_CURLIM_LDO5 0>; + interrupt-parent = <&pmic>; + regulator-boot-on; + }; + + v1v8: ldo6 { + regulator-name = "v1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + interrupts = <IT_CURLIM_LDO6 0>; + interrupt-parent = <&pmic>; + regulator-enable-ramp-delay = <300000>; + }; + + vref_ddr: vref_ddr { + regulator-name = "vref_ddr"; + regulator-always-on; + regulator-over-current-protection; + }; + + bst_out: boost { + regulator-name = "bst_out"; + interrupts = <IT_OCP_BOOST 0>; + interrupt-parent = <&pmic>; + }; + + vbus_otg: pwr_sw1 { + regulator-name = "vbus_otg"; + interrupts = <IT_OCP_OTG 0>; + interrupt-parent = <&pmic>; + regulator-active-discharge; + }; + + vbus_sw: pwr_sw2 { + regulator-name = "vbus_sw"; + interrupts = <IT_OCP_SWOUT 0>; + interrupt-parent = <&pmic>; + regulator-active-discharge; + }; + }; + + onkey { + compatible = "st,stpmic1-onkey"; + interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 1>; + interrupt-names = "onkey-falling", "onkey-rising"; + status = "okay"; + }; + + watchdog { + compatible = "st,stpmic1-wdt"; + status = "disabled"; + }; + }; +}; + +&iwdg2 { + timeout-sec = <32>; + status = "okay"; +}; + +&rng1 { + status = "okay"; +}; + +&rtc { + status = "okay"; +}; + +&sdmmc1 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_a>; + pinctrl-1 = <&sdmmc1_b4_od_pins_a>; + pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>; + broken-cd; + st,sig-dir; + st,neg-edge; + st,use-ckin; + bus-width = <4>; + vmmc-supply = <&vdd_sd>; + status = "okay"; +}; + +&uart4 { + /* On Low speed expansion header */ + label = "LS-UART1"; + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins_b>; + status = "okay"; +}; + +&uart7 { + /* On Low speed expansion header */ + label = "LS-UART0"; + pinctrl-names = "default"; + pinctrl-0 = <&uart7_pins_a>; + status = "okay"; +}; diff --git a/dts/src/arm/stm32mp157a-dk1.dts b/dts/src/arm/stm32mp157a-dk1.dts index 098dbfb06b..f3f0e37aad 100644 --- a/dts/src/arm/stm32mp157a-dk1.dts +++ b/dts/src/arm/stm32mp157a-dk1.dts @@ -7,7 +7,7 @@ /dts-v1/; #include "stm32mp157c.dtsi" -#include "stm32mp157-pinctrl.dtsi" +#include "stm32mp157xac-pinctrl.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/mfd/st,stpmic1.h> @@ -28,6 +28,17 @@ reg = <0xc0000000 0x20000000>; }; + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gpu_reserved: gpu@d4000000 { + reg = <0xd4000000 0x4000000>; + no-map; + }; + }; + led { compatible = "gpio-leds"; blue { @@ -51,7 +62,7 @@ pinctrl-0 = <ðernet0_rgmii_pins_a>; pinctrl-1 = <ðernet0_rgmii_pins_sleep_a>; pinctrl-names = "default", "sleep"; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; max-speed = <1000>; phy-handle = <&phy0>; @@ -65,6 +76,47 @@ }; }; +&gpu { + contiguous-area = <&gpu_reserved>; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c1_pins_a>; + pinctrl-1 = <&i2c1_pins_sleep_a>; + i2c-scl-rising-time-ns = <100>; + i2c-scl-falling-time-ns = <7>; + status = "okay"; + /delete-property/dmas; + /delete-property/dma-names; + + hdmi-transmitter@39 { + compatible = "sil,sii9022"; + reg = <0x39>; + iovcc-supply = <&v3v3_hdmi>; + cvcc12-supply = <&v1v2_hdmi>; + reset-gpios = <&gpioa 10 GPIO_ACTIVE_LOW>; + interrupts = <1 IRQ_TYPE_EDGE_FALLING>; + interrupt-parent = <&gpiog>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <<dc_pins_a>; + pinctrl-1 = <<dc_pins_sleep_a>; + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + sii9022_in: endpoint { + remote-endpoint = <<dc_ep0_out>; + }; + }; + }; + }; +}; &i2c4 { pinctrl-names = "default"; @@ -223,6 +275,20 @@ status = "okay"; }; +<dc { + status = "okay"; + + port { + #address-cells = <1>; + #size-cells = <0>; + + ltdc_ep0_out: endpoint@0 { + reg = <0>; + remote-endpoint = <&sii9022_in>; + }; + }; +}; + &rng1 { status = "okay"; }; diff --git a/dts/src/arm/stm32mp157c-ed1.dts b/dts/src/arm/stm32mp157c-ed1.dts index 62a8c78e7e..4fe7f71a74 100644 --- a/dts/src/arm/stm32mp157c-ed1.dts +++ b/dts/src/arm/stm32mp157c-ed1.dts @@ -6,7 +6,7 @@ /dts-v1/; #include "stm32mp157c.dtsi" -#include "stm32mp157-pinctrl.dtsi" +#include "stm32mp157xaa-pinctrl.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/mfd/st,stpmic1.h> @@ -23,6 +23,17 @@ reg = <0xC0000000 0x40000000>; }; + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gpu_reserved: gpu@e8000000 { + reg = <0xe8000000 0x8000000>; + no-map; + }; + }; + aliases { serial0 = &uart4; }; @@ -61,6 +72,11 @@ status = "okay"; }; +&gpu { + contiguous-area = <&gpu_reserved>; + status = "okay"; +}; + &i2c4 { pinctrl-names = "default"; pinctrl-0 = <&i2c4_pins_a>; diff --git a/dts/src/arm/stm32mp157c-ev1.dts b/dts/src/arm/stm32mp157c-ev1.dts index b6aca40b9b..feb8f77272 100644 --- a/dts/src/arm/stm32mp157c-ev1.dts +++ b/dts/src/arm/stm32mp157c-ev1.dts @@ -7,6 +7,7 @@ #include "stm32mp157c-ed1.dts" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> / { model = "STMicroelectronics STM32MP157C eval daughter on eval mother"; @@ -21,6 +22,51 @@ ethernet0 = ðernet0; }; + clocks { + clk_ext_camera: clk-ext-camera { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + }; + }; + + joystick { + compatible = "gpio-keys"; + #size-cells = <0>; + pinctrl-0 = <&joystick_pins>; + pinctrl-names = "default"; + button-0 { + label = "JoySel"; + linux,code = <KEY_ENTER>; + interrupt-parent = <&stmfx_pinctrl>; + interrupts = <0 IRQ_TYPE_EDGE_RISING>; + }; + button-1 { + label = "JoyDown"; + linux,code = <KEY_DOWN>; + interrupt-parent = <&stmfx_pinctrl>; + interrupts = <1 IRQ_TYPE_EDGE_RISING>; + }; + button-2 { + label = "JoyLeft"; + linux,code = <KEY_LEFT>; + interrupt-parent = <&stmfx_pinctrl>; + interrupts = <2 IRQ_TYPE_EDGE_RISING>; + }; + button-3 { + label = "JoyRight"; + linux,code = <KEY_RIGHT>; + interrupt-parent = <&stmfx_pinctrl>; + interrupts = <3 IRQ_TYPE_EDGE_RISING>; + }; + button-4 { + label = "JoyUp"; + linux,code = <KEY_UP>; + interrupt-parent = <&stmfx_pinctrl>; + interrupts = <4 IRQ_TYPE_EDGE_RISING>; + }; + }; + panel_backlight: panel-backlight { compatible = "gpio-backlight"; gpios = <&gpiod 13 GPIO_ACTIVE_LOW>; @@ -35,6 +81,23 @@ status = "okay"; }; +&dcmi { + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&dcmi_pins_a>; + pinctrl-1 = <&dcmi_sleep_pins_a>; + + port { + dcmi_0: endpoint { + remote-endpoint = <&ov5640_0>; + bus-width = <8>; + hsync-active = <0>; + vsync-active = <0>; + pclk-sample = <1>; + }; + }; +}; + &dsi { #address-cells = <1>; #size-cells = <0>; @@ -64,6 +127,7 @@ reg = <0>; reset-gpios = <&gpiof 15 GPIO_ACTIVE_LOW>; backlight = <&panel_backlight>; + power-supply = <&v3v3>; status = "okay"; port { @@ -79,7 +143,7 @@ pinctrl-0 = <ðernet0_rgmii_pins_a>; pinctrl-1 = <ðernet0_rgmii_pins_sleep_a>; pinctrl-names = "default", "sleep"; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; max-speed = <1000>; phy-handle = <&phy0>; @@ -99,6 +163,60 @@ i2c-scl-rising-time-ns = <185>; i2c-scl-falling-time-ns = <20>; status = "okay"; + + ov5640: camera@3c { + compatible = "ovti,ov5640"; + pinctrl-names = "default"; + pinctrl-0 = <&ov5640_pins>; + reg = <0x3c>; + clocks = <&clk_ext_camera>; + clock-names = "xclk"; + DOVDD-supply = <&v2v8>; + powerdown-gpios = <&stmfx_pinctrl 18 GPIO_ACTIVE_HIGH>; + reset-gpios = <&stmfx_pinctrl 19 GPIO_ACTIVE_LOW>; + rotation = <180>; + status = "okay"; + + port { + ov5640_0: endpoint { + remote-endpoint = <&dcmi_0>; + bus-width = <8>; + data-shift = <2>; /* lines 9:2 are used */ + hsync-active = <0>; + vsync-active = <0>; + pclk-sample = <1>; + }; + }; + }; + + stmfx: stmfx@42 { + compatible = "st,stmfx-0300"; + reg = <0x42>; + interrupts = <8 IRQ_TYPE_EDGE_RISING>; + interrupt-parent = <&gpioi>; + vdd-supply = <&v3v3>; + + stmfx_pinctrl: stmfx-pin-controller { + compatible = "st,stmfx-0300-pinctrl"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&stmfx_pinctrl 0 0 24>; + + joystick_pins: joystick { + pins = "gpio0", "gpio1", "gpio2", "gpio3", "gpio4"; + drive-push-pull; + bias-pull-down; + }; + + ov5640_pins: camera { + pins = "agpio2", "agpio3"; /* stmfx pins 18 & 19 */ + drive-push-pull; + output-low; + }; + }; + }; }; &i2c5 { @@ -131,14 +249,16 @@ }; &qspi { - pinctrl-names = "default"; + pinctrl-names = "default", "sleep"; pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a &qspi_bk2_pins_a>; + pinctrl-1 = <&qspi_clk_sleep_pins_a &qspi_bk1_sleep_pins_a &qspi_bk2_sleep_pins_a>; reg = <0x58003000 0x1000>, <0x70000000 0x4000000>; #address-cells = <1>; #size-cells = <0>; status = "okay"; flash0: mx66l51235l@0 { + compatible = "jedec,spi-nor"; reg = <0>; spi-rx-bus-width = <4>; spi-max-frequency = <108000000>; @@ -147,6 +267,7 @@ }; flash1: mx66l51235l@1 { + compatible = "jedec,spi-nor"; reg = <1>; spi-rx-bus-width = <4>; spi-max-frequency = <108000000>; diff --git a/dts/src/arm/stm32mp157c.dtsi b/dts/src/arm/stm32mp157c.dtsi index 2afeee65c3..0c4e6ebc35 100644 --- a/dts/src/arm/stm32mp157c.dtsi +++ b/dts/src/arm/stm32mp157c.dtsi @@ -365,6 +365,17 @@ status = "disabled"; }; + i2s2: audio-controller@4000b000 { + compatible = "st,stm32h7-i2s"; + #sound-dai-cells = <0>; + reg = <0x4000b000 0x400>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dmamux1 39 0x400 0x01>, + <&dmamux1 40 0x400 0x01>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + spi3: spi@4000c000 { #address-cells = <1>; #size-cells = <0>; @@ -379,6 +390,17 @@ status = "disabled"; }; + i2s3: audio-controller@4000c000 { + compatible = "st,stm32h7-i2s"; + #sound-dai-cells = <0>; + reg = <0x4000c000 0x400>; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dmamux1 61 0x400 0x01>, + <&dmamux1 62 0x400 0x01>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + spdifrx: audio-controller@4000d000 { compatible = "st,stm32h7-spdifrx"; #sound-dai-cells = <0>; @@ -607,6 +629,17 @@ status = "disabled"; }; + i2s1: audio-controller@44004000 { + compatible = "st,stm32h7-i2s"; + #sound-dai-cells = <0>; + reg = <0x44004000 0x400>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dmamux1 37 0x400 0x01>, + <&dmamux1 38 0x400 0x01>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + spi4: spi@44005000 { #address-cells = <1>; #size-cells = <0>; @@ -708,6 +741,100 @@ status = "disabled"; }; + sai1: sai@4400a000 { + compatible = "st,stm32h7-sai"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x4400a000 0x400>; + reg = <0x4400a000 0x4>, <0x4400a3f0 0x10>; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + resets = <&rcc SAI1_R>; + status = "disabled"; + + sai1a: audio-controller@4400a004 { + #sound-dai-cells = <0>; + + compatible = "st,stm32-sai-sub-a"; + reg = <0x4 0x1c>; + clocks = <&rcc SAI1_K>; + clock-names = "sai_ck"; + dmas = <&dmamux1 87 0x400 0x01>; + status = "disabled"; + }; + + sai1b: audio-controller@4400a024 { + #sound-dai-cells = <0>; + compatible = "st,stm32-sai-sub-b"; + reg = <0x24 0x1c>; + clocks = <&rcc SAI1_K>; + clock-names = "sai_ck"; + dmas = <&dmamux1 88 0x400 0x01>; + status = "disabled"; + }; + }; + + sai2: sai@4400b000 { + compatible = "st,stm32h7-sai"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x4400b000 0x400>; + reg = <0x4400b000 0x4>, <0x4400b3f0 0x10>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + resets = <&rcc SAI2_R>; + status = "disabled"; + + sai2a: audio-controller@4400b004 { + #sound-dai-cells = <0>; + compatible = "st,stm32-sai-sub-a"; + reg = <0x4 0x1c>; + clocks = <&rcc SAI2_K>; + clock-names = "sai_ck"; + dmas = <&dmamux1 89 0x400 0x01>; + status = "disabled"; + }; + + sai2b: audio-controller@4400b024 { + #sound-dai-cells = <0>; + compatible = "st,stm32-sai-sub-b"; + reg = <0x24 0x1c>; + clocks = <&rcc SAI2_K>; + clock-names = "sai_ck"; + dmas = <&dmamux1 90 0x400 0x01>; + status = "disabled"; + }; + }; + + sai3: sai@4400c000 { + compatible = "st,stm32h7-sai"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x4400c000 0x400>; + reg = <0x4400c000 0x4>, <0x4400c3f0 0x10>; + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; + resets = <&rcc SAI3_R>; + status = "disabled"; + + sai3a: audio-controller@4400c004 { + #sound-dai-cells = <0>; + compatible = "st,stm32-sai-sub-a"; + reg = <0x04 0x1c>; + clocks = <&rcc SAI3_K>; + clock-names = "sai_ck"; + dmas = <&dmamux1 113 0x400 0x01>; + status = "disabled"; + }; + + sai3b: audio-controller@4400c024 { + #sound-dai-cells = <0>; + compatible = "st,stm32-sai-sub-b"; + reg = <0x24 0x1c>; + clocks = <&rcc SAI3_K>; + clock-names = "sai_ck"; + dmas = <&dmamux1 114 0x400 0x01>; + status = "disabled"; + }; + }; + dfsdm: dfsdm@4400d000 { compatible = "st,stm32mp1-dfsdm"; reg = <0x4400d000 0x800>; @@ -914,6 +1041,18 @@ status = "disabled"; }; + dcmi: dcmi@4c006000 { + compatible = "st,stm32-dcmi"; + reg = <0x4c006000 0x400>; + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; + resets = <&rcc CAMITF_R>; + clocks = <&rcc DCMI>; + clock-names = "mclk"; + dmas = <&dmamux1 75 0x400 0x0d>; + dma-names = "tx"; + status = "disabled"; + }; + rcc: rcc@50000000 { compatible = "st,stm32mp1-rcc", "syscon"; reg = <0x50000000 0x1000>; @@ -1020,6 +1159,37 @@ status = "disabled"; }; + sai4: sai@50027000 { + compatible = "st,stm32h7-sai"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x50027000 0x400>; + reg = <0x50027000 0x4>, <0x500273f0 0x10>; + interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; + resets = <&rcc SAI4_R>; + status = "disabled"; + + sai4a: audio-controller@50027004 { + #sound-dai-cells = <0>; + compatible = "st,stm32-sai-sub-a"; + reg = <0x04 0x1c>; + clocks = <&rcc SAI4_K>; + clock-names = "sai_ck"; + dmas = <&dmamux1 99 0x400 0x01>; + status = "disabled"; + }; + + sai4b: audio-controller@50027024 { + #sound-dai-cells = <0>; + compatible = "st,stm32-sai-sub-b"; + reg = <0x24 0x1c>; + clocks = <&rcc SAI4_K>; + clock-names = "sai_ck"; + dmas = <&dmamux1 100 0x400 0x01>; + status = "disabled"; + }; + }; + dts: thermal@50028000 { compatible = "st,stm32-thermal"; reg = <0x50028000 0x100>; @@ -1149,6 +1319,16 @@ status = "disabled"; }; + gpu: gpu@59000000 { + compatible = "vivante,gc"; + reg = <0x59000000 0x800>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc GPU>, <&rcc GPU_K>; + clock-names = "bus" ,"core"; + resets = <&rcc GPU_R>; + status = "disabled"; + }; + dsi: dsi@5a000000 { compatible = "st,stm32-dsi"; reg = <0x5a000000 0x800>; diff --git a/dts/src/arm/stm32mp157xaa-pinctrl.dtsi b/dts/src/arm/stm32mp157xaa-pinctrl.dtsi new file mode 100644 index 0000000000..875adf5e1e --- /dev/null +++ b/dts/src/arm/stm32mp157xaa-pinctrl.dtsi @@ -0,0 +1,90 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2019 - All Rights Reserved + * Author: Alexandre Torgue <alexandre.torgue@st.com> + */ + +#include "stm32mp157-pinctrl.dtsi" +/ { + soc { + pinctrl: pin-controller@50002000 { + st,package = <STM32MP_PKG_AA>; + + gpioa: gpio@50002000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 0 16>; + }; + + gpiob: gpio@50003000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 16 16>; + }; + + gpioc: gpio@50004000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 32 16>; + }; + + gpiod: gpio@50005000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 48 16>; + }; + + gpioe: gpio@50006000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 64 16>; + }; + + gpiof: gpio@50007000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 80 16>; + }; + + gpiog: gpio@50008000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 96 16>; + }; + + gpioh: gpio@50009000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 112 16>; + }; + + gpioi: gpio@5000a000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 128 16>; + }; + + gpioj: gpio@5000b000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 144 16>; + }; + + gpiok: gpio@5000c000 { + status = "okay"; + ngpios = <8>; + gpio-ranges = <&pinctrl 0 160 8>; + }; + }; + + pinctrl_z: pin-controller-z@54004000 { + st,package = <STM32MP_PKG_AA>; + + gpioz: gpio@54004000 { + status = "okay"; + ngpios = <8>; + gpio-ranges = <&pinctrl_z 0 400 8>; + }; + }; + }; +}; diff --git a/dts/src/arm/stm32mp157xab-pinctrl.dtsi b/dts/src/arm/stm32mp157xab-pinctrl.dtsi new file mode 100644 index 0000000000..961fa12a59 --- /dev/null +++ b/dts/src/arm/stm32mp157xab-pinctrl.dtsi @@ -0,0 +1,62 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2019 - All Rights Reserved + * Author: Alexandre Torgue <alexandre.torgue@st.com> + */ + +#include "stm32mp157-pinctrl.dtsi" +/ { + soc { + pinctrl: pin-controller@50002000 { + st,package = <STM32MP_PKG_AB>; + + gpioa: gpio@50002000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 0 16>; + }; + + gpiob: gpio@50003000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 16 16>; + }; + + gpioc: gpio@50004000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 32 16>; + }; + + gpiod: gpio@50005000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 48 16>; + }; + + gpioe: gpio@50006000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 64 16>; + }; + + gpiof: gpio@50007000 { + status = "okay"; + ngpios = <6>; + gpio-ranges = <&pinctrl 6 86 6>; + }; + + gpiog: gpio@50008000 { + status = "okay"; + ngpios = <10>; + gpio-ranges = <&pinctrl 6 102 10>; + }; + + gpioh: gpio@50009000 { + status = "okay"; + ngpios = <2>; + gpio-ranges = <&pinctrl 0 112 2>; + }; + }; + }; +}; diff --git a/dts/src/arm/stm32mp157xac-pinctrl.dtsi b/dts/src/arm/stm32mp157xac-pinctrl.dtsi new file mode 100644 index 0000000000..26600f188d --- /dev/null +++ b/dts/src/arm/stm32mp157xac-pinctrl.dtsi @@ -0,0 +1,78 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2019 - All Rights Reserved + * Author: Alexandre Torgue <alexandre.torgue@st.com> + */ + +#include "stm32mp157-pinctrl.dtsi" +/ { + soc { + pinctrl: pin-controller@50002000 { + st,package = <STM32MP_PKG_AC>; + + gpioa: gpio@50002000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 0 16>; + }; + + gpiob: gpio@50003000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 16 16>; + }; + + gpioc: gpio@50004000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 32 16>; + }; + + gpiod: gpio@50005000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 48 16>; + }; + + gpioe: gpio@50006000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 64 16>; + }; + + gpiof: gpio@50007000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 80 16>; + }; + + gpiog: gpio@50008000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 96 16>; + }; + + gpioh: gpio@50009000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 112 16>; + }; + + gpioi: gpio@5000a000 { + status = "okay"; + ngpios = <12>; + gpio-ranges = <&pinctrl 0 128 12>; + }; + }; + + pinctrl_z: pin-controller-z@54004000 { + st,package = <STM32MP_PKG_AC>; + + gpioz: gpio@54004000 { + status = "okay"; + ngpios = <8>; + gpio-ranges = <&pinctrl_z 0 400 8>; + }; + }; + }; +}; diff --git a/dts/src/arm/stm32mp157xad-pinctrl.dtsi b/dts/src/arm/stm32mp157xad-pinctrl.dtsi new file mode 100644 index 0000000000..910113f3e6 --- /dev/null +++ b/dts/src/arm/stm32mp157xad-pinctrl.dtsi @@ -0,0 +1,62 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2019 - All Rights Reserved + * Author: Alexandre Torgue <alexandre.torgue@st.com> + */ + +#include "stm32mp157-pinctrl.dtsi" +/ { + soc { + pinctrl: pin-controller@50002000 { + st,package = <STM32MP_PKG_AD>; + + gpioa: gpio@50002000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 0 16>; + }; + + gpiob: gpio@50003000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 16 16>; + }; + + gpioc: gpio@50004000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 32 16>; + }; + + gpiod: gpio@50005000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 48 16>; + }; + + gpioe: gpio@50006000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 64 16>; + }; + + gpiof: gpio@50007000 { + status = "okay"; + ngpios = <6>; + gpio-ranges = <&pinctrl 6 86 6>; + }; + + gpiog: gpio@50008000 { + status = "okay"; + ngpios = <10>; + gpio-ranges = <&pinctrl 6 102 10>; + }; + + gpioh: gpio@50009000 { + status = "okay"; + ngpios = <2>; + gpio-ranges = <&pinctrl 0 112 2>; + }; + }; + }; +}; diff --git a/dts/src/arm/sun5i-gr8-evb.dts b/dts/src/arm/sun5i-gr8-evb.dts index d003b895a6..4c20d731a9 100644 --- a/dts/src/arm/sun5i-gr8-evb.dts +++ b/dts/src/arm/sun5i-gr8-evb.dts @@ -150,7 +150,7 @@ }; pcf8563: rtc@51 { - compatible = "phg,pcf8563"; + compatible = "nxp,pcf8563"; reg = <0x51>; }; }; diff --git a/dts/src/arm/sun6i-a31.dtsi b/dts/src/arm/sun6i-a31.dtsi index c04efad81b..dcddc33924 100644 --- a/dts/src/arm/sun6i-a31.dtsi +++ b/dts/src/arm/sun6i-a31.dtsi @@ -216,6 +216,7 @@ #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <24000000>; + clock-accuracy = <50000>; clock-output-names = "osc24M"; }; @@ -223,7 +224,8 @@ #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <32768>; - clock-output-names = "osc32k"; + clock-accuracy = <50000>; + clock-output-names = "ext_osc32k"; }; /* @@ -588,7 +590,7 @@ ccu: clock@1c20000 { compatible = "allwinner,sun6i-a31-ccu"; reg = <0x01c20000 0x400>; - clocks = <&osc24M>, <&osc32k>; + clocks = <&osc24M>, <&rtc 0>; clock-names = "hosc", "losc"; #clock-cells = <1>; #reset-cells = <1>; @@ -601,7 +603,7 @@ <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu CLK_APB1_PIO>, <&osc24M>, <&osc32k>; + clocks = <&ccu CLK_APB1_PIO>, <&osc24M>, <&rtc 0>; clock-names = "apb", "hosc", "losc"; gpio-controller; interrupt-controller; @@ -987,6 +989,8 @@ dma-names = "rx", "tx"; resets = <&ccu RST_AHB1_SPI0>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; spi1: spi@1c69000 { @@ -999,6 +1003,8 @@ dma-names = "rx", "tx"; resets = <&ccu RST_AHB1_SPI1>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; spi2: spi@1c6a000 { @@ -1011,6 +1017,8 @@ dma-names = "rx", "tx"; resets = <&ccu RST_AHB1_SPI2>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; spi3: spi@1c6b000 { @@ -1023,6 +1031,8 @@ dma-names = "rx", "tx"; resets = <&ccu RST_AHB1_SPI3>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; gic: interrupt-controller@1c81000 { @@ -1279,10 +1289,13 @@ }; rtc: rtc@1f00000 { + #clock-cells = <1>; compatible = "allwinner,sun6i-a31-rtc"; reg = <0x01f00000 0x54>; interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&osc32k>; + clock-output-names = "osc32k"; }; nmi_intc: interrupt-controller@1f00c00 { @@ -1300,7 +1313,7 @@ ar100: ar100_clk { compatible = "allwinner,sun6i-a31-ar100-clk"; #clock-cells = <0>; - clocks = <&osc32k>, <&osc24M>, + clocks = <&rtc 0>, <&osc24M>, <&ccu CLK_PLL_PERIPH>, <&ccu CLK_PLL_PERIPH>; clock-output-names = "ar100"; @@ -1335,7 +1348,7 @@ ir_clk: ir_clk { #clock-cells = <0>; compatible = "allwinner,sun4i-a10-mod0-clk"; - clocks = <&osc32k>, <&osc24M>; + clocks = <&rtc 0>, <&osc24M>; clock-output-names = "ir"; }; @@ -1365,7 +1378,7 @@ reg = <0x01f02c00 0x400>; interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&apb0_gates 0>, <&osc24M>, <&osc32k>; + clocks = <&apb0_gates 0>, <&osc24M>, <&rtc 0>; clock-names = "apb", "hosc", "losc"; resets = <&apb0_rst 0>; gpio-controller; diff --git a/dts/src/arm/sun7i-a20-icnova-swac.dts b/dts/src/arm/sun7i-a20-icnova-swac.dts index 949494730a..7449aac3f4 100644 --- a/dts/src/arm/sun7i-a20-icnova-swac.dts +++ b/dts/src/arm/sun7i-a20-icnova-swac.dts @@ -49,7 +49,8 @@ / { model = "ICnova-A20 SWAC"; - compatible = "swac,icnova-a20-swac", "incircuit,icnova-a20", "allwinner,sun7i-a20"; + compatible = "incircuit,icnova-a20-swac", "incircuit,icnova-a20", + "allwinner,sun7i-a20"; aliases { serial0 = &uart0; diff --git a/dts/src/arm/sun7i-a20-olinuxino-lime2.dts b/dts/src/arm/sun7i-a20-olinuxino-lime2.dts index 95c6f89490..56f451c07f 100644 --- a/dts/src/arm/sun7i-a20-olinuxino-lime2.dts +++ b/dts/src/arm/sun7i-a20-olinuxino-lime2.dts @@ -194,6 +194,14 @@ #include "axp209.dtsi" +&ac_power_supply { + status = "okay"; +}; + +&battery_power_supply { + status = "okay"; +}; + ®_dcdc2 { regulator-always-on; regulator-min-microvolt = <1000000>; diff --git a/dts/src/arm/sun8i-a83t-tbs-a711.dts b/dts/src/arm/sun8i-a83t-tbs-a711.dts index 66d078053d..568b90ece3 100644 --- a/dts/src/arm/sun8i-a83t-tbs-a711.dts +++ b/dts/src/arm/sun8i-a83t-tbs-a711.dts @@ -224,14 +224,14 @@ vref-supply = <®_aldo2>; status = "okay"; - button@210 { + button-210 { label = "Volume Up"; linux,code = <KEY_VOLUMEUP>; channel = <0>; voltage = <210000>; }; - button@410 { + button-410 { label = "Volume Down"; linux,code = <KEY_VOLUMEDOWN>; channel = <0>; diff --git a/dts/src/arm/sun8i-a83t.dtsi b/dts/src/arm/sun8i-a83t.dtsi index 392b0cabbf..ada6d08bc5 100644 --- a/dts/src/arm/sun8i-a83t.dtsi +++ b/dts/src/arm/sun8i-a83t.dtsi @@ -679,6 +679,20 @@ #interrupt-cells = <3>; #gpio-cells = <3>; + /omit-if-no-ref/ + csi_8bit_parallel_pins: csi-8bit-parallel-pins { + pins = "PE0", "PE2", "PE3", "PE6", "PE7", + "PE8", "PE9", "PE10", "PE11", + "PE12", "PE13"; + function = "csi"; + }; + + /omit-if-no-ref/ + csi_mclk_pin: csi-mclk-pin { + pins = "PE1"; + function = "csi"; + }; + emac_rgmii_pins: emac-rgmii-pins { pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", "PD11", "PD12", "PD13", "PD14", "PD18", @@ -997,6 +1011,21 @@ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>; }; + csi: camera@1cb0000 { + compatible = "allwinner,sun8i-a83t-csi"; + reg = <0x01cb0000 0x1000>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_CSI>, + <&ccu CLK_CSI_SCLK>, + <&ccu CLK_DRAM_CSI>; + clock-names = "bus", "mod", "ram"; + resets = <&ccu RST_BUS_CSI>; + status = "disabled"; + + csi_in: port { + }; + }; + hdmi: hdmi@1ee0000 { compatible = "allwinner,sun8i-a83t-dw-hdmi"; reg = <0x01ee0000 0x10000>; diff --git a/dts/src/arm/sun8i-h2-plus-bananapi-m2-zero.dts b/dts/src/arm/sun8i-h2-plus-bananapi-m2-zero.dts index 78a37a4718..d277d04303 100644 --- a/dts/src/arm/sun8i-h2-plus-bananapi-m2-zero.dts +++ b/dts/src/arm/sun8i-h2-plus-bananapi-m2-zero.dts @@ -59,8 +59,7 @@ gpios = <&r_pio 0 1 GPIO_ACTIVE_HIGH>; /* PL1 */ enable-active-high; gpios-states = <0x1>; - states = <1100000 0x0 - 1300000 0x1>; + states = <1100000 0>, <1300000 1>; }; wifi_pwrseq: wifi_pwrseq { diff --git a/dts/src/arm/sun8i-h2-plus-orangepi-zero.dts b/dts/src/arm/sun8i-h2-plus-orangepi-zero.dts index 4970eda287..f19ed981da 100644 --- a/dts/src/arm/sun8i-h2-plus-orangepi-zero.dts +++ b/dts/src/arm/sun8i-h2-plus-orangepi-zero.dts @@ -102,8 +102,7 @@ gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */ enable-active-high; gpios-states = <1>; - states = <1100000 0 - 1300000 1>; + states = <1100000 0>, <1300000 1>; }; wifi_pwrseq: wifi_pwrseq { diff --git a/dts/src/arm/sun8i-h3-beelink-x2.dts b/dts/src/arm/sun8i-h3-beelink-x2.dts index 6277f13f3e..ac9e26b1d9 100644 --- a/dts/src/arm/sun8i-h3-beelink-x2.dts +++ b/dts/src/arm/sun8i-h3-beelink-x2.dts @@ -90,6 +90,8 @@ wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ + clocks = <&rtc 1>; + clock-names = "ext_clock"; }; sound_spdif { @@ -155,6 +157,8 @@ &mmc1 { vmmc-supply = <®_vcc3v3>; + vqmmc-supply = <®_vcc3v3>; + mmc-pwrseq = <&wifi_pwrseq>; bus-width = <4>; non-removable; status = "okay"; diff --git a/dts/src/arm/sun8i-h3-orangepi-one.dts b/dts/src/arm/sun8i-h3-orangepi-one.dts index 840849169b..4759ba3f29 100644 --- a/dts/src/arm/sun8i-h3-orangepi-one.dts +++ b/dts/src/arm/sun8i-h3-orangepi-one.dts @@ -109,8 +109,7 @@ gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */ enable-active-high; gpios-states = <0x1>; - states = <1100000 0x0 - 1300000 0x1>; + states = <1100000 0>, <1300000 1>; }; }; diff --git a/dts/src/arm/sun8i-r40-bananapi-m2-ultra.dts b/dts/src/arm/sun8i-r40-bananapi-m2-ultra.dts index c488aaacbd..42d62d1ba1 100644 --- a/dts/src/arm/sun8i-r40-bananapi-m2-ultra.dts +++ b/dts/src/arm/sun8i-r40-bananapi-m2-ultra.dts @@ -201,10 +201,15 @@ &pio { pinctrl-names = "default"; pinctrl-0 = <&clk_out_a_pin>; + vcc-pa-supply = <®_aldo2>; + vcc-pc-supply = <®_dcdc1>; + vcc-pd-supply = <®_dcdc1>; + vcc-pe-supply = <®_eldo1>; + vcc-pf-supply = <®_dcdc1>; + vcc-pg-supply = <®_dldo1>; }; ®_aldo2 { - regulator-always-on; regulator-min-microvolt = <2500000>; regulator-max-microvolt = <2500000>; regulator-name = "vcc-pa"; diff --git a/dts/src/arm/sun8i-r40.dtsi b/dts/src/arm/sun8i-r40.dtsi index bb856e53b8..6007d0cc25 100644 --- a/dts/src/arm/sun8i-r40.dtsi +++ b/dts/src/arm/sun8i-r40.dtsi @@ -318,8 +318,7 @@ }; rtc: rtc@1c20400 { - compatible = "allwinner,sun8i-r40-rtc", - "allwinner,sun8i-h3-rtc"; + compatible = "allwinner,sun8i-r40-rtc"; reg = <0x01c20400 0x400>; interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; clock-output-names = "osc32k", "osc32k-out"; diff --git a/dts/src/arm/sun8i-v3s.dtsi b/dts/src/arm/sun8i-v3s.dtsi index df72b1719c..d7aef128ac 100644 --- a/dts/src/arm/sun8i-v3s.dtsi +++ b/dts/src/arm/sun8i-v3s.dtsi @@ -84,6 +84,7 @@ #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <24000000>; + clock-accuracy = <50000>; clock-output-names = "osc24M"; }; @@ -91,7 +92,8 @@ #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <32768>; - clock-output-names = "osc32k"; + clock-accuracy = <50000>; + clock-output-names = "ext-osc32k"; }; }; @@ -264,17 +266,20 @@ ccu: clock@1c20000 { compatible = "allwinner,sun8i-v3s-ccu"; reg = <0x01c20000 0x400>; - clocks = <&osc24M>, <&osc32k>; + clocks = <&osc24M>, <&rtc 0>; clock-names = "hosc", "losc"; #clock-cells = <1>; #reset-cells = <1>; }; rtc: rtc@1c20400 { - compatible = "allwinner,sun6i-a31-rtc"; + #clock-cells = <1>; + compatible = "allwinner,sun8i-v3-rtc"; reg = <0x01c20400 0x54>; interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&osc32k>; + clock-output-names = "osc32k", "osc32k-out"; }; pio: pinctrl@1c20800 { @@ -282,7 +287,7 @@ reg = <0x01c20800 0x400>; interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>; + clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&rtc 0>; clock-names = "apb", "hosc", "losc"; gpio-controller; #gpio-cells = <3>; diff --git a/dts/src/arm/sun8i-v40-bananapi-m2-berry.dts b/dts/src/arm/sun8i-v40-bananapi-m2-berry.dts index f05cabd34b..15c22b06fc 100644 --- a/dts/src/arm/sun8i-v40-bananapi-m2-berry.dts +++ b/dts/src/arm/sun8i-v40-bananapi-m2-berry.dts @@ -50,6 +50,7 @@ compatible = "sinovoip,bpi-m2-berry", "allwinner,sun8i-r40"; aliases { + ethernet0 = &gmac; serial0 = &uart0; }; @@ -57,6 +58,17 @@ stdout-path = "serial0:115200n8"; }; + connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + leds { compatible = "gpio-leds"; @@ -84,14 +96,52 @@ wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&pio 6 10 GPIO_ACTIVE_LOW>; /* PG10 WIFI_EN */ + clocks = <&ccu CLK_OUTA>; + clock-names = "ext_clock"; }; }; +&ahci { + ahci-supply = <®_dldo4>; + phy-supply = <®_eldo3>; + status = "okay"; +}; + +&de { + status = "okay"; +}; + &ehci1 { /* Terminus Tech FE 1.1s 4-port USB 2.0 hub here */ status = "okay"; }; +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_rgmii_pins>; + phy-handle = <&phy1>; + phy-mode = "rgmii"; + phy-supply = <®_dc1sw>; + status = "okay"; +}; + +&gmac_mdio { + phy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; +}; + +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &i2c0 { status = "okay"; @@ -123,6 +173,23 @@ status = "okay"; }; +&pio { + pinctrl-names = "default"; + pinctrl-0 = <&clk_out_a_pin>; + vcc-pa-supply = <®_aldo2>; + vcc-pc-supply = <®_dcdc1>; + vcc-pd-supply = <®_dcdc1>; + vcc-pe-supply = <®_eldo1>; + vcc-pf-supply = <®_dcdc1>; + vcc-pg-supply = <®_dldo1>; +}; + +®_aldo2 { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-name = "vcc-pa"; +}; + ®_aldo3 { regulator-always-on; regulator-min-microvolt = <2700000>; @@ -130,6 +197,12 @@ regulator-name = "avcc"; }; +®_dc1sw { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-gmac-phy"; +}; + ®_dcdc1 { regulator-always-on; regulator-min-microvolt = <3000000>; @@ -164,18 +237,68 @@ regulator-name = "vcc-wifi-io"; }; +/* + * Our WiFi chip needs both DLDO2 and DLDO3 to be powered at the same + * time, with the two being in sync, to be able to meet maximum power + * consumption during transmits. Since this is not really supported + * right now, just use the two as always on, and we will fix it later. + */ + ®_dldo2 { + regulator-always-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-name = "vcc-wifi"; }; +®_dldo3 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi-2"; +}; + +®_dldo4 { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-name = "vdd2v5-sata"; +}; + +®_eldo3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "vdd1v2-sata"; +}; + +&tcon_tv0 { + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pg_pins>, <&uart3_rts_cts_pg_pins>; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + clocks = <&ccu CLK_OUTA>; + clock-names = "lpo"; + vbat-supply = <®_dldo2>; + vddio-supply = <®_dldo1>; + device-wakeup-gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */ + /* TODO host wake line connected to PMIC GPIO pins */ + shutdown-gpios = <&pio 7 12 GPIO_ACTIVE_HIGH>; /* PH12 */ + max-speed = <1500000>; + }; +}; + &usbphy { usb1_vbus-supply = <®_vcc5v0>; status = "okay"; diff --git a/dts/src/arm/sunxi-bananapi-m2-plus-v1.2.dtsi b/dts/src/arm/sunxi-bananapi-m2-plus-v1.2.dtsi index 53edd1faee..22466afd38 100644 --- a/dts/src/arm/sunxi-bananapi-m2-plus-v1.2.dtsi +++ b/dts/src/arm/sunxi-bananapi-m2-plus-v1.2.dtsi @@ -21,8 +21,7 @@ regulator-ramp-delay = <50>; /* 4ms */ gpios = <&r_pio 0 1 GPIO_ACTIVE_HIGH>; /* PL1 */ gpios-states = <0x1>; - states = <1100000 0x0 - 1300000 0x1>; + states = <1100000 0>, <1300000 1>; }; }; diff --git a/dts/src/arm/uniphier-ld4-ref.dts b/dts/src/arm/uniphier-ld4-ref.dts index 3aaca10f66..f2d060f403 100644 --- a/dts/src/arm/uniphier-ld4-ref.dts +++ b/dts/src/arm/uniphier-ld4-ref.dts @@ -77,4 +77,8 @@ &nand { status = "okay"; + + nand@0 { + reg = <0>; + }; }; diff --git a/dts/src/arm/uniphier-ld4.dtsi b/dts/src/arm/uniphier-ld4.dtsi index c2706cef0b..58cd4e8fa5 100644 --- a/dts/src/arm/uniphier-ld4.dtsi +++ b/dts/src/arm/uniphier-ld4.dtsi @@ -403,9 +403,11 @@ status = "disabled"; reg-names = "nand_data", "denali_reg"; reg = <0x68000000 0x20>, <0x68100000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; interrupts = <0 65 4>; pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_nand2cs>; + pinctrl-0 = <&pinctrl_nand>; clock-names = "nand", "nand_x", "ecc"; clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>; resets = <&sys_rst 2>; diff --git a/dts/src/arm/uniphier-ld6b-ref.dts b/dts/src/arm/uniphier-ld6b-ref.dts index 3d9080ee7a..60994b6e8b 100644 --- a/dts/src/arm/uniphier-ld6b-ref.dts +++ b/dts/src/arm/uniphier-ld6b-ref.dts @@ -90,4 +90,8 @@ &nand { status = "okay"; + + nand@0 { + reg = <0>; + }; }; diff --git a/dts/src/arm/uniphier-pro4-ref.dts b/dts/src/arm/uniphier-pro4-ref.dts index 28038b17bb..854f2eba3e 100644 --- a/dts/src/arm/uniphier-pro4-ref.dts +++ b/dts/src/arm/uniphier-pro4-ref.dts @@ -98,4 +98,8 @@ &nand { status = "okay"; + + nand@0 { + reg = <0>; + }; }; diff --git a/dts/src/arm/uniphier-pro4.dtsi b/dts/src/arm/uniphier-pro4.dtsi index 97d051ef49..7f64e5a616 100644 --- a/dts/src/arm/uniphier-pro4.dtsi +++ b/dts/src/arm/uniphier-pro4.dtsi @@ -593,6 +593,8 @@ status = "disabled"; reg-names = "nand_data", "denali_reg"; reg = <0x68000000 0x20>, <0x68100000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; interrupts = <0 65 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_nand>; diff --git a/dts/src/arm/uniphier-pro5.dtsi b/dts/src/arm/uniphier-pro5.dtsi index 3657387394..eff74717b3 100644 --- a/dts/src/arm/uniphier-pro5.dtsi +++ b/dts/src/arm/uniphier-pro5.dtsi @@ -458,9 +458,11 @@ status = "disabled"; reg-names = "nand_data", "denali_reg"; reg = <0x68000000 0x20>, <0x68100000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; interrupts = <0 65 4>; pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_nand2cs>; + pinctrl-0 = <&pinctrl_nand>; clock-names = "nand", "nand_x", "ecc"; clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>; resets = <&sys_rst 2>; diff --git a/dts/src/arm/uniphier-pxs2.dtsi b/dts/src/arm/uniphier-pxs2.dtsi index 06a049f6ed..4eddbb8d7f 100644 --- a/dts/src/arm/uniphier-pxs2.dtsi +++ b/dts/src/arm/uniphier-pxs2.dtsi @@ -766,9 +766,11 @@ status = "disabled"; reg-names = "nand_data", "denali_reg"; reg = <0x68000000 0x20>, <0x68100000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; interrupts = <0 65 4>; pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_nand2cs>; + pinctrl-0 = <&pinctrl_nand>; clock-names = "nand", "nand_x", "ecc"; clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>; resets = <&sys_rst 2>; diff --git a/dts/src/arm/uniphier-sld8-ref.dts b/dts/src/arm/uniphier-sld8-ref.dts index 01bf94c6b9..cf9ea0b150 100644 --- a/dts/src/arm/uniphier-sld8-ref.dts +++ b/dts/src/arm/uniphier-sld8-ref.dts @@ -81,4 +81,8 @@ &nand { status = "okay"; + + nand@0 { + reg = <0>; + }; }; diff --git a/dts/src/arm/uniphier-sld8.dtsi b/dts/src/arm/uniphier-sld8.dtsi index efce02768b..cbebb6e4c6 100644 --- a/dts/src/arm/uniphier-sld8.dtsi +++ b/dts/src/arm/uniphier-sld8.dtsi @@ -407,9 +407,11 @@ status = "disabled"; reg-names = "nand_data", "denali_reg"; reg = <0x68000000 0x20>, <0x68100000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; interrupts = <0 65 4>; pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_nand2cs>; + pinctrl-0 = <&pinctrl_nand>; clock-names = "nand", "nand_x", "ecc"; clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>; resets = <&sys_rst 2>; diff --git a/dts/src/arm/versatile-ab.dts b/dts/src/arm/versatile-ab.dts index 269e6bf99c..37bd41ff8d 100644 --- a/dts/src/arm/versatile-ab.dts +++ b/dts/src/arm/versatile-ab.dts @@ -161,6 +161,9 @@ compatible = "arm,versatile-flash", "cfi-flash"; reg = <0x34000000 0x04000000>; bank-width = <4>; + partitions { + compatible = "arm,arm-firmware-suite"; + }; }; i2c0: i2c@10002000 { diff --git a/dts/src/arm/vexpress-v2m-rs1.dtsi b/dts/src/arm/vexpress-v2m-rs1.dtsi index d3963e9eaf..d6a1fc2692 100644 --- a/dts/src/arm/vexpress-v2m-rs1.dtsi +++ b/dts/src/arm/vexpress-v2m-rs1.dtsi @@ -30,11 +30,14 @@ #interrupt-cells = <1>; ranges; - flash@0,00000000 { + nor_flash: flash@0,00000000 { compatible = "arm,vexpress-flash", "cfi-flash"; reg = <0 0x00000000 0x04000000>, <4 0x00000000 0x04000000>; bank-width = <4>; + partitions { + compatible = "arm,arm-firmware-suite"; + }; }; psram@1,00000000 { diff --git a/dts/src/arm/vexpress-v2m.dtsi b/dts/src/arm/vexpress-v2m.dtsi index 798c97aff7..8e57e15307 100644 --- a/dts/src/arm/vexpress-v2m.dtsi +++ b/dts/src/arm/vexpress-v2m.dtsi @@ -35,6 +35,9 @@ reg = <0 0x00000000 0x04000000>, <1 0x00000000 0x04000000>; bank-width = <4>; + partitions { + compatible = "arm,arm-firmware-suite"; + }; }; psram@2,00000000 { diff --git a/dts/src/arm/vexpress-v2p-ca15_a7.dts b/dts/src/arm/vexpress-v2p-ca15_a7.dts index 00cd9f5bef..1de0a658ad 100644 --- a/dts/src/arm/vexpress-v2p-ca15_a7.dts +++ b/dts/src/arm/vexpress-v2p-ca15_a7.dts @@ -440,7 +440,7 @@ /* non-configurable replicators don't show up on the * AMBA bus. As such no need to add "arm,primecell". */ - compatible = "arm,coresight-replicator"; + compatible = "arm,coresight-static-replicator"; out-ports { #address-cells = <1>; @@ -471,7 +471,7 @@ }; funnel@20040000 { - compatible = "arm,coresight-funnel", "arm,primecell"; + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0 0x20040000 0 0x1000>; clocks = <&oscclk6a>; @@ -680,3 +680,12 @@ <0 3 &gic 0 39 4>; }; }; + +&nor_flash { + /* + * Unfortunately, accessing the flash disturbs the CPU idle states + * (suspend) and CPU hotplug of this platform. For this reason, flash + * hardware access is disabled by default on this platform alone. + */ + status = "disabled"; +}; diff --git a/dts/src/arm/vf610-zii-dev.dtsi b/dts/src/arm/vf610-zii-dev.dtsi index 0507e6dcbb..a1b4ccee2a 100644 --- a/dts/src/arm/vf610-zii-dev.dtsi +++ b/dts/src/arm/vf610-zii-dev.dtsi @@ -177,6 +177,36 @@ status = "okay"; }; +&qspi0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_qspi0>; + status = "okay"; + + /* + * Attached MT25QL02 can go up to 90Mhz in DTR and 166 in STR + * modes, so, spi-max-frequency is limited to 90MHz + */ + flash@0 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <90000000>; + spi-rx-bus-width = <4>; + reg = <0>; + m25p,fast-read; + }; + + flash@2 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <90000000>; + spi-rx-bus-width = <4>; + reg = <2>; + m25p,fast-read; + }; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart0>; @@ -360,12 +390,18 @@ pinctrl_qspi0: qspi0grp { fsl,pins = < - VF610_PAD_PTD7__QSPI0_B_QSCK 0x31c3 - VF610_PAD_PTD8__QSPI0_B_CS0 0x31ff - VF610_PAD_PTD9__QSPI0_B_DATA3 0x31c3 - VF610_PAD_PTD10__QSPI0_B_DATA2 0x31c3 - VF610_PAD_PTD11__QSPI0_B_DATA1 0x31c3 - VF610_PAD_PTD12__QSPI0_B_DATA0 0x31c3 + VF610_PAD_PTD0__QSPI0_A_QSCK 0x38c2 + VF610_PAD_PTD1__QSPI0_A_CS0 0x38c2 + VF610_PAD_PTD2__QSPI0_A_DATA3 0x38c3 + VF610_PAD_PTD3__QSPI0_A_DATA2 0x38c3 + VF610_PAD_PTD4__QSPI0_A_DATA1 0x38c3 + VF610_PAD_PTD5__QSPI0_A_DATA0 0x38c3 + VF610_PAD_PTD7__QSPI0_B_QSCK 0x38c2 + VF610_PAD_PTD8__QSPI0_B_CS0 0x38c2 + VF610_PAD_PTD9__QSPI0_B_DATA3 0x38c3 + VF610_PAD_PTD10__QSPI0_B_DATA2 0x38c3 + VF610_PAD_PTD11__QSPI0_B_DATA1 0x38c3 + VF610_PAD_PTD12__QSPI0_B_DATA0 0x38c3 >; }; @@ -385,8 +421,8 @@ pinctrl_uart2: uart2grp { fsl,pins = < - VF610_PAD_PTD0__UART2_TX 0x21a2 - VF610_PAD_PTD1__UART2_RX 0x21a1 + VF610_PAD_PTD23__UART2_TX 0x21a2 + VF610_PAD_PTD22__UART2_RX 0x21a1 >; }; diff --git a/dts/src/arm64/allwinner/axp803.dtsi b/dts/src/arm64/allwinner/axp803.dtsi index c3a618e127..f0349ef4bf 100644 --- a/dts/src/arm64/allwinner/axp803.dtsi +++ b/dts/src/arm64/allwinner/axp803.dtsi @@ -185,4 +185,10 @@ status = "disabled"; }; }; + + usb_power_supply: usb-power-supply { + compatible = "x-powers,axp803-usb-power-supply", + "x-powers,axp813-usb-power-supply"; + status = "disabled"; + }; }; diff --git a/dts/src/arm64/allwinner/sun50i-a64-amarula-relic.dts b/dts/src/arm64/allwinner/sun50i-a64-amarula-relic.dts index 019ae09ea0..5634245d11 100644 --- a/dts/src/arm64/allwinner/sun50i-a64-amarula-relic.dts +++ b/dts/src/arm64/allwinner/sun50i-a64-amarula-relic.dts @@ -85,8 +85,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins>; status = "okay"; sensor@48 { @@ -99,6 +97,22 @@ bias-pull-up; }; +&i2c1 { + status = "okay"; + + touchscreen@5d { + compatible = "goodix,gt5663"; + reg = <0x5d>; + AVDD28-supply = <®_ldo_io0>; /* VCC-CTP: GPIO0-LDO */ + interrupt-parent = <&pio>; + interrupts = <7 4 IRQ_TYPE_EDGE_FALLING>; + irq-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* CTP-INT: PH4 */ + reset-gpios = <&pio 7 8 GPIO_ACTIVE_HIGH>; /* CTP-RST: PH8 */ + touchscreen-inverted-x; + touchscreen-inverted-y; + }; +}; + &mmc1 { pinctrl-names = "default"; pinctrl-0 = <&mmc1_pins>; @@ -262,6 +276,13 @@ regulator-name = "vdd-cpus"; }; +®_ldo_io0 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-name = "vcc-ctp"; + status = "okay"; +}; + ®_rtc_ldo { regulator-name = "vcc-rtc"; }; diff --git a/dts/src/arm64/allwinner/sun50i-a64-bananapi-m64.dts b/dts/src/arm64/allwinner/sun50i-a64-bananapi-m64.dts index 0a56c0c23b..208373efee 100644 --- a/dts/src/arm64/allwinner/sun50i-a64-bananapi-m64.dts +++ b/dts/src/arm64/allwinner/sun50i-a64-bananapi-m64.dts @@ -145,8 +145,6 @@ }; &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins>; status = "okay"; }; @@ -394,8 +392,13 @@ status = "okay"; }; +&usb_power_supply { + status = "okay"; +}; + &usbphy { usb0_id_det-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */ + usb0_vbus_power-supply = <&usb_power_supply>; usb0_vbus-supply = <®_drivevbus>; status = "okay"; }; diff --git a/dts/src/arm64/allwinner/sun50i-a64-nanopi-a64.dts b/dts/src/arm64/allwinner/sun50i-a64-nanopi-a64.dts index f4e78531f6..9b9d915712 100644 --- a/dts/src/arm64/allwinner/sun50i-a64-nanopi-a64.dts +++ b/dts/src/arm64/allwinner/sun50i-a64-nanopi-a64.dts @@ -120,12 +120,6 @@ }; /* i2c1 connected with gpio headers like pine64, bananapi */ -&i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins>; - status = "disabled"; -}; - &i2c1_pins { bias-pull-up; }; diff --git a/dts/src/arm64/allwinner/sun50i-a64-oceanic-5205-5inmfd.dts b/dts/src/arm64/allwinner/sun50i-a64-oceanic-5205-5inmfd.dts index 6a2154525d..787ebd805a 100644 --- a/dts/src/arm64/allwinner/sun50i-a64-oceanic-5205-5inmfd.dts +++ b/dts/src/arm64/allwinner/sun50i-a64-oceanic-5205-5inmfd.dts @@ -37,6 +37,22 @@ status = "okay"; }; +&i2c0 { + status = "okay"; + + touchscreen@5d { + compatible = "goodix,gt911"; + reg = <0x5d>; + AVDD28-supply = <®_ldo_io0>; /* VDD_CTP: GPIO0-LDO */ + interrupt-parent = <&pio>; + interrupts = <7 4 IRQ_TYPE_EDGE_FALLING>; + irq-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* CTP-INT: PH4 */ + reset-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* CTP-RST: PH11 */ + touchscreen-inverted-x; + touchscreen-inverted-y; + }; +}; + &mdio { ext_rgmii_phy: ethernet-phy@1 { compatible = "ethernet-phy-ieee802.3-c22"; @@ -52,6 +68,13 @@ regulator-name = "vcc-phy"; }; +®_ldo_io0 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-name = "vdd-ctp"; + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pb_pins>; diff --git a/dts/src/arm64/allwinner/sun50i-a64-orangepi-win.dts b/dts/src/arm64/allwinner/sun50i-a64-orangepi-win.dts index 510f661229..5ef3c62c76 100644 --- a/dts/src/arm64/allwinner/sun50i-a64-orangepi-win.dts +++ b/dts/src/arm64/allwinner/sun50i-a64-orangepi-win.dts @@ -109,6 +109,8 @@ wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>; /* PL8 */ + clocks = <&rtc 1>; + clock-names = "ext_clock"; }; }; @@ -170,6 +172,14 @@ bus-width = <4>; non-removable; status = "okay"; + + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + interrupt-parent = <&r_pio>; + interrupts = <0 7 IRQ_TYPE_LEVEL_LOW>; /* PL7 */ + interrupt-names = "host-wake"; + }; }; &ohci0 { @@ -342,7 +352,20 @@ &uart1 { pinctrl-names = "default"; pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; + uart-has-rtscts; status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + max-speed = <1500000>; + clocks = <&rtc 1>; + clock-names = "lpo"; + vbat-supply = <®_dldo2>; + vddio-supply = <®_dldo4>; + device-wakeup-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */ + host-wakeup-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */ + shutdown-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */ + }; }; /* On Pi-2 connector, RTS/CTS optional */ diff --git a/dts/src/arm64/allwinner/sun50i-a64-pine64.dts b/dts/src/arm64/allwinner/sun50i-a64-pine64.dts index b7ac6374b1..409523cb09 100644 --- a/dts/src/arm64/allwinner/sun50i-a64-pine64.dts +++ b/dts/src/arm64/allwinner/sun50i-a64-pine64.dts @@ -122,8 +122,6 @@ }; &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins>; status = "okay"; }; diff --git a/dts/src/arm64/allwinner/sun50i-a64-teres-i.dts b/dts/src/arm64/allwinner/sun50i-a64-teres-i.dts index 0ec46b969a..1069e7012c 100644 --- a/dts/src/arm64/allwinner/sun50i-a64-teres-i.dts +++ b/dts/src/arm64/allwinner/sun50i-a64-teres-i.dts @@ -79,6 +79,25 @@ compatible = "mmc-pwrseq-simple"; reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */ }; + + speaker_amp: audio-amplifier { + compatible = "simple-audio-amplifier"; + enable-gpios = <&r_pio 0 12 GPIO_ACTIVE_HIGH>; /* PL12 */ + sound-name-prefix = "Speaker Amp"; + }; +}; + +&codec { + status = "okay"; +}; + +&codec_analog { + cpvdd-supply = <®_eldo1>; + status = "okay"; +}; + +&dai { + status = "okay"; }; &ehci1 { @@ -92,8 +111,6 @@ */ &i2c0 { clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins>; status = "okay"; }; @@ -279,6 +296,29 @@ vcc-hdmi-supply = <®_dldo1>; }; +&sound { + simple-audio-card,aux-devs = <&codec_analog>, <&speaker_amp>; + simple-audio-card,widgets = "Headphone", "Headphone Jack", + "Microphone", "Headset Microphone", + "Microphone", "Internal Microphone", + "Speaker", "Internal Speaker"; + simple-audio-card,routing = + "Left DAC", "AIF1 Slot 0 Left", + "Right DAC", "AIF1 Slot 0 Right", + "AIF1 Slot 0 Left ADC", "Left ADC", + "AIF1 Slot 0 Right ADC", "Right ADC", + "Headphone Jack", "HP", + "Speaker Amp INL", "LINEOUT", + "Speaker Amp INR", "LINEOUT", + "Internal Speaker", "Speaker Amp OUTL", + "Internal Speaker", "Speaker Amp OUTR", + "Internal Microphone", "MBIAS", + "MIC1", "Internal Microphone", + "Headset Microphone", "HBIAS", + "MIC2", "Headset Microphone"; + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pb_pins>; diff --git a/dts/src/arm64/allwinner/sun50i-a64.dtsi b/dts/src/arm64/allwinner/sun50i-a64.dtsi index 8c5b521e63..9cc9bdde81 100644 --- a/dts/src/arm64/allwinner/sun50i-a64.dtsi +++ b/dts/src/arm64/allwinner/sun50i-a64.dtsi @@ -611,6 +611,16 @@ function = "i2c1"; }; + /omit-if-no-ref/ + lcd_rgb666_pins: lcd-rgb666-pins { + pins = "PD0", "PD1", "PD2", "PD3", "PD4", + "PD5", "PD6", "PD7", "PD8", "PD9", + "PD10", "PD11", "PD12", "PD13", + "PD14", "PD15", "PD16", "PD17", + "PD18", "PD19", "PD20", "PD21"; + function = "lcd0"; + }; + mmc0_pins: mmc0-pins { pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5"; @@ -730,6 +740,14 @@ status = "disabled"; }; + lradc: lradc@1c21800 { + compatible = "allwinner,sun50i-a64-lradc", + "allwinner,sun8i-a83t-r-lradc"; + reg = <0x01c21800 0x400>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + i2s0: i2s@1c22000 { #sound-dai-cells = <0>; compatible = "allwinner,sun50i-a64-i2s", @@ -842,6 +860,8 @@ interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_BUS_I2C0>; resets = <&ccu RST_BUS_I2C0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -853,6 +873,8 @@ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_BUS_I2C1>; resets = <&ccu RST_BUS_I2C1>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; diff --git a/dts/src/arm64/allwinner/sun50i-h5-emlid-neutis-n5-devboard.dts b/dts/src/arm64/allwinner/sun50i-h5-emlid-neutis-n5-devboard.dts index 62409afbaf..c924090331 100644 --- a/dts/src/arm64/allwinner/sun50i-h5-emlid-neutis-n5-devboard.dts +++ b/dts/src/arm64/allwinner/sun50i-h5-emlid-neutis-n5-devboard.dts @@ -55,8 +55,7 @@ regulator-ramp-delay = <50>; /* 4ms */ gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */ gpios-states = <0x1>; - states = <1100000 0x0 - 1300000 0x1>; + states = <1100000 0>, <1300000 1>; }; }; diff --git a/dts/src/arm64/allwinner/sun50i-h5-nanopi-neo-plus2.dts b/dts/src/arm64/allwinner/sun50i-h5-nanopi-neo-plus2.dts index 9887948d5c..1c7dde84e5 100644 --- a/dts/src/arm64/allwinner/sun50i-h5-nanopi-neo-plus2.dts +++ b/dts/src/arm64/allwinner/sun50i-h5-nanopi-neo-plus2.dts @@ -104,8 +104,7 @@ regulator-ramp-delay = <50>; /* 4ms */ gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; gpios-states = <0x1>; - states = <1100000 0x0 - 1300000 0x1>; + states = <1100000 0>, <1300000 1>; }; wifi_pwrseq: wifi_pwrseq { diff --git a/dts/src/arm64/allwinner/sun50i-h6-pine-h64.dts b/dts/src/arm64/allwinner/sun50i-h6-pine-h64.dts index 4802902e12..1898345183 100644 --- a/dts/src/arm64/allwinner/sun50i-h6-pine-h64.dts +++ b/dts/src/arm64/allwinner/sun50i-h6-pine-h64.dts @@ -127,6 +127,12 @@ status = "okay"; }; +&pio { + vcc-pc-supply = <®_bldo2>; + vcc-pd-supply = <®_cldo1>; + vcc-pg-supply = <®_aldo1>; +}; + &r_i2c { status = "okay"; @@ -243,10 +249,16 @@ pcf8563: rtc@51 { compatible = "nxp,pcf8563"; reg = <0x51>; + interrupt-parent = <&r_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; #clock-cells = <0>; }; }; +&r_pio { + vcc-pm-supply = <®_aldo1>; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_ph_pins>; diff --git a/dts/src/arm64/allwinner/sun50i-h6.dtsi b/dts/src/arm64/allwinner/sun50i-h6.dtsi index 16c5c3d0fd..7628a7c830 100644 --- a/dts/src/arm64/allwinner/sun50i-h6.dtsi +++ b/dts/src/arm64/allwinner/sun50i-h6.dtsi @@ -203,11 +203,32 @@ #reset-cells = <1>; }; + dma: dma-controller@3002000 { + compatible = "allwinner,sun50i-h6-dma"; + reg = <0x03002000 0x1000>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_DMA>, <&ccu CLK_MBUS_DMA>; + clock-names = "bus", "mbus"; + dma-channels = <16>; + dma-requests = <46>; + resets = <&ccu RST_BUS_DMA>; + #dma-cells = <1>; + }; + sid: sid@3006000 { compatible = "allwinner,sun50i-h6-sid"; reg = <0x03006000 0x400>; }; + watchdog: watchdog@30090a0 { + compatible = "allwinner,sun50i-h6-wdt", + "allwinner,sun6i-a31-wdt"; + reg = <0x030090a0 0x20>; + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; + /* Broken on some H6 boards */ + status = "disabled"; + }; + pio: pinctrl@300b000 { compatible = "allwinner,sun50i-h6-pinctrl"; reg = <0x0300b000 0x400>; @@ -622,6 +643,13 @@ #reset-cells = <1>; }; + r_watchdog: watchdog@7020400 { + compatible = "allwinner,sun50i-h6-wdt", + "allwinner,sun6i-a31-wdt"; + reg = <0x07020400 0x20>; + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; + }; + r_intc: interrupt-controller@7021000 { compatible = "allwinner,sun50i-h6-r-intc", "allwinner,sun6i-a31-r-intc"; diff --git a/dts/src/arm64/altera/socfpga_stratix10.dtsi b/dts/src/arm64/altera/socfpga_stratix10.dtsi index 470dcfd9de..b05d78164f 100644 --- a/dts/src/arm64/altera/socfpga_stratix10.dtsi +++ b/dts/src/arm64/altera/socfpga_stratix10.dtsi @@ -138,7 +138,7 @@ }; gmac0: ethernet@ff800000 { - compatible = "altr,socfpga-stmmac", "snps,dwmac-3.74a", "snps,dwmac"; + compatible = "altr,socfpga-stmmac-a10-s10", "snps,dwmac-3.74a", "snps,dwmac"; reg = <0xff800000 0x2000>; interrupts = <0 90 4>; interrupt-names = "macirq"; @@ -156,7 +156,7 @@ }; gmac1: ethernet@ff802000 { - compatible = "altr,socfpga-stmmac", "snps,dwmac-3.74a", "snps,dwmac"; + compatible = "altr,socfpga-stmmac-a10-s10", "snps,dwmac-3.74a", "snps,dwmac"; reg = <0xff802000 0x2000>; interrupts = <0 91 4>; interrupt-names = "macirq"; @@ -169,12 +169,12 @@ rx-fifo-depth = <16384>; snps,multicast-filter-bins = <256>; iommus = <&smmu 2>; - altr,sysmgr-syscon = <&sysmgr 0x48 0>; + altr,sysmgr-syscon = <&sysmgr 0x48 8>; status = "disabled"; }; gmac2: ethernet@ff804000 { - compatible = "altr,socfpga-stmmac", "snps,dwmac-3.74a", "snps,dwmac"; + compatible = "altr,socfpga-stmmac-a10-s10", "snps,dwmac-3.74a", "snps,dwmac"; reg = <0xff804000 0x2000>; interrupts = <0 92 4>; interrupt-names = "macirq"; @@ -187,7 +187,7 @@ rx-fifo-depth = <16384>; snps,multicast-filter-bins = <256>; iommus = <&smmu 3>; - altr,sysmgr-syscon = <&sysmgr 0x4c 0>; + altr,sysmgr-syscon = <&sysmgr 0x4c 16>; status = "disabled"; }; @@ -539,6 +539,14 @@ interrupts = <16 4>; }; + ocram-ecc@ff8cc000 { + compatible = "altr,socfpga-s10-ocram-ecc", + "altr,socfpga-a10-ocram-ecc"; + reg = <0xff8cc000 0x100>; + altr,ecc-parent = <&ocram>; + interrupts = <1 4>; + }; + usb0-ecc@ff8c4000 { compatible = "altr,socfpga-s10-usb-ecc", "altr,socfpga-usb-ecc"; diff --git a/dts/src/arm64/altera/socfpga_stratix10_socdk.dts b/dts/src/arm64/altera/socfpga_stratix10_socdk.dts index 84f9f5902e..66e4ffb4e9 100644 --- a/dts/src/arm64/altera/socfpga_stratix10_socdk.dts +++ b/dts/src/arm64/altera/socfpga_stratix10_socdk.dts @@ -56,6 +56,17 @@ clock-frequency = <25000000>; }; }; + + eccmgr { + sdmmca-ecc@ff8c8c00 { + compatible = "altr,socfpga-s10-sdmmc-ecc", + "altr,socfpga-sdmmc-ecc"; + reg = <0xff8c8c00 0x100>; + altr,ecc-parent = <&mmc>; + interrupts = <14 4>, + <15 4>; + }; + }; }; }; diff --git a/dts/src/arm64/amlogic/meson-axg-s400.dts b/dts/src/arm64/amlogic/meson-axg-s400.dts index 75fe1a2c49..4cd2d59518 100644 --- a/dts/src/arm64/amlogic/meson-axg-s400.dts +++ b/dts/src/arm64/amlogic/meson-axg-s400.dts @@ -482,8 +482,8 @@ /* emmc storage */ &sd_emmc_c { - status = "disabled"; - pinctrl-0 = <&emmc_pins>; + status = "okay"; + pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>; pinctrl-1 = <&emmc_clk_gate_pins>; pinctrl-names = "default", "clk-gate"; diff --git a/dts/src/arm64/amlogic/meson-axg.dtsi b/dts/src/arm64/amlogic/meson-axg.dtsi index 34704fecf7..6219337033 100644 --- a/dts/src/arm64/amlogic/meson-axg.dtsi +++ b/dts/src/arm64/amlogic/meson-axg.dtsi @@ -171,7 +171,9 @@ ranges; ethmac: ethernet@ff3f0000 { - compatible = "amlogic,meson-axg-dwmac", "snps,dwmac"; + compatible = "amlogic,meson-axg-dwmac", + "snps,dwmac-3.70a", + "snps,dwmac"; reg = <0x0 0xff3f0000 0x0 0x10000 0x0 0xff634540 0x0 0x8>; interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; @@ -299,7 +301,7 @@ }; emmc_pins: emmc { - mux { + mux-0 { groups = "emmc_nand_d0", "emmc_nand_d1", "emmc_nand_d2", @@ -308,14 +310,26 @@ "emmc_nand_d5", "emmc_nand_d6", "emmc_nand_d7", - "emmc_clk", - "emmc_cmd", - "emmc_ds"; + "emmc_cmd"; + function = "emmc"; + bias-pull-up; + }; + + mux-1 { + groups = "emmc_clk"; function = "emmc"; bias-disable; }; }; + emmc_ds_pins: emmc_ds { + mux { + groups = "emmc_ds"; + function = "emmc"; + bias-pull-down; + }; + }; + emmc_clk_gate_pins: emmc_clk_gate { mux { groups = "BOOT_8"; @@ -559,13 +573,18 @@ }; sdio_pins: sdio { - mux { + mux-0 { groups = "sdio_d0", "sdio_d1", "sdio_d2", "sdio_d3", - "sdio_cmd", - "sdio_clk"; + "sdio_cmd"; + function = "sdio"; + bias-pull-up; + }; + + mux-1 { + groups = "sdio_clk"; function = "sdio"; bias-disable; }; diff --git a/dts/src/arm64/amlogic/meson-g12a-sei510.dts b/dts/src/arm64/amlogic/meson-g12a-sei510.dts index 34b40587e5..c7a8736885 100644 --- a/dts/src/arm64/amlogic/meson-g12a-sei510.dts +++ b/dts/src/arm64/amlogic/meson-g12a-sei510.dts @@ -9,15 +9,12 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include <dt-bindings/gpio/meson-g12a-gpio.h> +#include <dt-bindings/sound/meson-g12a-tohdmitx.h> / { compatible = "seirobotics,sei510", "amlogic,g12a"; model = "SEI Robotics SEI510"; - aliases { - serial0 = &uart_AO; - }; - adc_keys { compatible = "adc-keys"; io-channels = <&saradc 0>; @@ -31,13 +28,25 @@ }; }; - ao_5v: regulator-ao_5v { - compatible = "regulator-fixed"; - regulator-name = "AO_5V"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&dc_in>; - regulator-always-on; + aliases { + serial0 = &uart_AO; + ethernet0 = ðmac; + }; + + mono_dac: audio-codec-0 { + compatible = "maxim,max98357a"; + #sound-dai-cells = <0>; + sound-name-prefix = "U16"; + sdmode-gpios = <&gpio GPIOX_8 GPIO_ACTIVE_HIGH>; + }; + + dmics: audio-codec-1 { + #sound-dai-cells = <0>; + compatible = "dmic-codec"; + num-channels = <2>; + wakeup-delay-ms = <50>; + status = "okay"; + sound-name-prefix = "MIC"; }; chosen { @@ -54,21 +63,9 @@ }; }; - dc_in: regulator-dc_in { - compatible = "regulator-fixed"; - regulator-name = "DC_IN"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; - - emmc_1v8: regulator-emmc_1v8 { - compatible = "regulator-fixed"; - regulator-name = "EMMC_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vddao_3v3>; - regulator-always-on; + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>; }; hdmi-connector { @@ -87,12 +84,30 @@ reg = <0x0 0x0 0x0 0x40000000>; }; - reserved-memory { - /* TEE Reserved Memory */ - bl32_reserved: bl32@5000000 { - reg = <0x0 0x05300000 0x0 0x2000000>; - no-map; - }; + ao_5v: regulator-ao_5v { + compatible = "regulator-fixed"; + regulator-name = "AO_5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&dc_in>; + regulator-always-on; + }; + + dc_in: regulator-dc_in { + compatible = "regulator-fixed"; + regulator-name = "DC_IN"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + emmc_1v8: regulator-emmc_1v8 { + compatible = "regulator-fixed"; + regulator-name = "EMMC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; }; vddao_3v3: regulator-vddao_3v3 { @@ -122,6 +137,146 @@ vin-supply = <&vddao_3v3>; regulator-always-on; }; + + reserved-memory { + /* TEE Reserved Memory */ + bl32_reserved: bl32@5000000 { + reg = <0x0 0x05300000 0x0 0x2000000>; + no-map; + }; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; + clocks = <&wifi32k>; + clock-names = "ext_clock"; + }; + + wifi32k: wifi32k { + compatible = "pwm-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ + }; + + sound { + compatible = "amlogic,axg-sound-card"; + model = "G12A-SEI510"; + audio-aux-devs = <&tdmout_a>, <&tdmout_b>, + <&tdmin_a>, <&tdmin_b>; + audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0", + "TDMOUT_A IN 1", "FRDDR_B OUT 0", + "TDMOUT_A IN 2", "FRDDR_C OUT 0", + "TDM_A Playback", "TDMOUT_A OUT", + "TDMOUT_B IN 0", "FRDDR_A OUT 1", + "TDMOUT_B IN 1", "FRDDR_B OUT 1", + "TDMOUT_B IN 2", "FRDDR_C OUT 1", + "TDM_B Playback", "TDMOUT_B OUT", + "TODDR_A IN 4", "PDM Capture", + "TODDR_B IN 4", "PDM Capture", + "TODDR_C IN 4", "PDM Capture", + "TDMIN_A IN 0", "TDM_A Capture", + "TDMIN_A IN 3", "TDM_A Loopback", + "TDMIN_B IN 0", "TDM_A Capture", + "TDMIN_B IN 3", "TDM_A Loopback", + "TDMIN_A IN 1", "TDM_B Capture", + "TDMIN_A IN 4", "TDM_B Loopback", + "TDMIN_B IN 1", "TDM_B Capture", + "TDMIN_B IN 4", "TDM_B Loopback", + "TODDR_A IN 0", "TDMIN_A OUT", + "TODDR_B IN 0", "TDMIN_A OUT", + "TODDR_C IN 0", "TDMIN_A OUT", + "TODDR_A IN 1", "TDMIN_B OUT", + "TODDR_B IN 1", "TDMIN_B OUT", + "TODDR_C IN 1", "TDMIN_B OUT"; + + assigned-clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + status = "okay"; + + dai-link-0 { + sound-dai = <&frddr_a>; + }; + + dai-link-1 { + sound-dai = <&frddr_b>; + }; + + dai-link-2 { + sound-dai = <&frddr_c>; + }; + + dai-link-3 { + sound-dai = <&toddr_a>; + }; + + dai-link-4 { + sound-dai = <&toddr_b>; + }; + + dai-link-5 { + sound-dai = <&toddr_c>; + }; + + /* internal speaker interface */ + dai-link-6 { + sound-dai = <&tdmif_a>; + dai-format = "i2s"; + dai-tdm-slot-tx-mask-0 = <1 1>; + mclk-fs = <256>; + + codec-0 { + sound-dai = <&mono_dac>; + }; + + codec-1 { + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_A>; + }; + }; + + /* 8ch hdmi interface */ + dai-link-7 { + sound-dai = <&tdmif_b>; + dai-format = "i2s"; + dai-tdm-slot-tx-mask-0 = <1 1>; + dai-tdm-slot-tx-mask-1 = <1 1>; + dai-tdm-slot-tx-mask-2 = <1 1>; + dai-tdm-slot-tx-mask-3 = <1 1>; + mclk-fs = <256>; + + codec@0 { + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; + }; + }; + + /* internal digital mics */ + dai-link-8 { + sound-dai = <&pdm>; + + codec { + sound-dai = <&dmics>; + }; + }; + + /* hdmi glue */ + dai-link-9 { + sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; + + codec { + sound-dai = <&hdmi_tx>; + }; + }; + }; +}; + +&arb { + status = "okay"; }; &cec_AO { @@ -138,27 +293,32 @@ hdmi-phandle = <&hdmi_tx>; }; +&clkc_audio { + status = "okay"; +}; + &cvbs_vdac_port { cvbs_vdac_out: endpoint { remote-endpoint = <&cvbs_connector_in>; }; }; -&saradc { +ðmac { status = "okay"; - vref-supply = <&vddio_ao1v8>; + phy-handle = <&internal_ephy>; + phy-mode = "rmii"; }; -&uart_A { +&frddr_a { status = "okay"; - pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; - pinctrl-names = "default"; - uart-has-rtscts; +}; - bluetooth { - compatible = "brcm,bcm43438-bt"; - shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; - }; +&frddr_b { + status = "okay"; +}; + +&frddr_c { + status = "okay"; }; &hdmi_tx { @@ -173,6 +333,163 @@ }; }; +&i2c3 { + status = "okay"; + pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>; + pinctrl-names = "default"; +}; + +&pwm_ef { + status = "okay"; + pinctrl-0 = <&pwm_e_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin0"; +}; + +&pdm { + pinctrl-0 = <&pdm_din0_z_pins>, <&pdm_din1_z_pins>, + <&pdm_din2_z_pins>, <&pdm_din3_z_pins>, + <&pdm_dclk_z_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&saradc { + status = "okay"; + vref-supply = <&vddio_ao1v8>; +}; + +/* SDIO */ +&sd_emmc_a { + status = "okay"; + pinctrl-0 = <&sdio_pins>; + pinctrl-1 = <&sdio_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + #address-cells = <1>; + #size-cells = <0>; + + bus-width = <4>; + cap-sd-highspeed; + sd-uhs-sdr50; + max-frequency = <100000000>; + + non-removable; + disable-wp; + + mmc-pwrseq = <&sdio_pwrseq>; + + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddio_ao1v8>; + + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; +}; + +/* SD card */ +&sd_emmc_b { + status = "okay"; + pinctrl-0 = <&sdcard_c_pins>; + pinctrl-1 = <&sdcard_clk_gate_c_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <50000000>; + disable-wp; + + cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddao_3v3>; +}; + +/* eMMC */ +&sd_emmc_c { + status = "okay"; + pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <8>; + cap-mmc-highspeed; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + max-frequency = <200000000>; + non-removable; + disable-wp; + + mmc-pwrseq = <&emmc_pwrseq>; + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&emmc_1v8>; +}; + +&tdmif_a { + pinctrl-0 = <&tdm_a_dout0_pins>, <&tdm_a_fs_pins>, <&tdm_a_sclk_pins>; + pinctrl-names = "default"; + status = "okay"; + + assigned-clocks = <&clkc_audio AUD_CLKID_TDM_SCLK_PAD0>, + <&clkc_audio AUD_CLKID_TDM_LRCLK_PAD0>; + assigned-clock-parents = <&clkc_audio AUD_CLKID_MST_A_SCLK>, + <&clkc_audio AUD_CLKID_MST_A_LRCLK>; + assigned-clock-rates = <0>, <0>; +}; + +&tdmif_b { + status = "okay"; +}; + +&tdmin_a { + status = "okay"; +}; + +&tdmin_b { + status = "okay"; +}; + +&tdmout_a { + status = "okay"; +}; + +&tdmout_b { + status = "okay"; +}; + +&toddr_a { + status = "okay"; +}; + +&toddr_b { + status = "okay"; +}; + +&toddr_c { + status = "okay"; +}; + +&tohdmitx { + status = "okay"; +}; + +&uart_A { + status = "okay"; + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; + pinctrl-names = "default"; + uart-has-rtscts; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; + max-speed = <2000000>; + clocks = <&wifi32k>; + clock-names = "lpo"; + vbat-supply = <&vddao_3v3>; + vddio-supply = <&vddio_ao1v8>; + }; +}; + &uart_AO { status = "okay"; pinctrl-0 = <&uart_ao_a_pins>; diff --git a/dts/src/arm64/amlogic/meson-g12a-u200.dts b/dts/src/arm64/amlogic/meson-g12a-u200.dts index 0e8045b8a9..8551fbd4a4 100644 --- a/dts/src/arm64/amlogic/meson-g12a-u200.dts +++ b/dts/src/arm64/amlogic/meson-g12a-u200.dts @@ -15,14 +15,12 @@ aliases { serial0 = &uart_AO; + ethernet0 = ðmac; }; + chosen { stdout-path = "serial0:115200n8"; }; - memory@0 { - device_type = "memory"; - reg = <0x0 0x0 0x0 0x40000000>; - }; cvbs-connector { compatible = "composite-video-connector"; @@ -34,13 +32,9 @@ }; }; - flash_1v8: regulator-flash_1v8 { - compatible = "regulator-fixed"; - regulator-name = "FLASH_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vcc_3v3>; - regulator-always-on; + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>; }; hdmi-connector { @@ -54,6 +48,20 @@ }; }; + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x40000000>; + }; + + flash_1v8: regulator-flash_1v8 { + compatible = "regulator-fixed"; + regulator-name = "FLASH_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_3v3>; + regulator-always-on; + }; + main_12v: regulator-main_12v { compatible = "regulator-fixed"; regulator-name = "12V"; @@ -62,6 +70,17 @@ regulator-always-on; }; + usb_pwr_en: regulator-usb_pwr_en { + compatible = "regulator-fixed"; + regulator-name = "USB_PWR_EN"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc_5v>; + + gpio = <&gpio GPIOH_6 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + vcc_1v8: regulator-vcc_1v8 { compatible = "regulator-fixed"; regulator-name = "VCC_1V8"; @@ -92,17 +111,6 @@ enable-active-high; }; - usb_pwr_en: regulator-usb_pwr_en { - compatible = "regulator-fixed"; - regulator-name = "USB_PWR_EN"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vcc_5v>; - - gpio = <&gpio GPIOH_6 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - vddao_1v8: regulator-vddao_1v8 { compatible = "regulator-fixed"; regulator-name = "VDDAO_1V8"; @@ -143,6 +151,12 @@ }; }; +ðmac { + status = "okay"; + phy-handle = <&internal_ephy>; + phy-mode = "rmii"; +}; + &hdmi_tx { status = "okay"; pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; @@ -156,6 +170,70 @@ }; }; +&ir { + status = "okay"; + pinctrl-0 = <&remote_input_ao_pins>; + pinctrl-names = "default"; +}; + +/* i2c Touch */ +&i2c0 { + status = "okay"; + pinctrl-0 = <&i2c0_sda_z0_pins>, <&i2c0_sck_z1_pins>; + pinctrl-names = "default"; +}; + +/* i2c CM */ +&i2c2 { + status = "okay"; + pinctrl-0 = <&i2c2_sda_z_pins>, <&i2c2_sck_z_pins>; + pinctrl-names = "default"; +}; + +/* i2c Audio */ +&i2c3 { + status = "okay"; + pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>; + pinctrl-names = "default"; +}; + +/* SD card */ +&sd_emmc_b { + status = "okay"; + pinctrl-0 = <&sdcard_c_pins>; + pinctrl-1 = <&sdcard_clk_gate_c_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <50000000>; + disable-wp; + + cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddao_3v3>; +}; + +/* eMMC */ +&sd_emmc_c { + status = "okay"; + pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <8>; + cap-mmc-highspeed; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + max-frequency = <200000000>; + non-removable; + disable-wp; + + mmc-pwrseq = <&emmc_pwrseq>; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&flash_1v8>; +}; + &uart_AO { status = "okay"; pinctrl-0 = <&uart_ao_a_pins>; diff --git a/dts/src/arm64/amlogic/meson-g12a-x96-max.dts b/dts/src/arm64/amlogic/meson-g12a-x96-max.dts index b3d913f28f..fe4013cca8 100644 --- a/dts/src/arm64/amlogic/meson-g12a-x96-max.dts +++ b/dts/src/arm64/amlogic/meson-g12a-x96-max.dts @@ -8,6 +8,7 @@ #include "meson-g12a.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/gpio/meson-g12a-gpio.h> +#include <dt-bindings/sound/meson-g12a-tohdmitx.h> / { compatible = "amediatech,x96-max", "amlogic,u200", "amlogic,g12a"; @@ -15,7 +16,16 @@ aliases { serial0 = &uart_AO; + ethernet0 = ðmac; }; + + spdif_dit: audio-codec-1 { + #sound-dai-cells = <0>; + compatible = "linux,spdif-dit"; + status = "okay"; + sound-name-prefix = "DIT"; + }; + chosen { stdout-path = "serial0:115200n8"; }; @@ -45,6 +55,18 @@ }; }; + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; + clocks = <&wifi32k>; + clock-names = "ext_clock"; + }; + flash_1v8: regulator-flash_1v8 { compatible = "regulator-fixed"; regulator-name = "FLASH_1V8"; @@ -109,6 +131,97 @@ vin-supply = <&dc_in>; regulator-always-on; }; + + sound { + compatible = "amlogic,axg-sound-card"; + model = "G12A-X96-MAX"; + audio-aux-devs = <&tdmout_b>; + audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1", + "TDMOUT_B IN 1", "FRDDR_B OUT 1", + "TDMOUT_B IN 2", "FRDDR_C OUT 1", + "TDM_B Playback", "TDMOUT_B OUT", + "SPDIFOUT IN 0", "FRDDR_A OUT 3", + "SPDIFOUT IN 1", "FRDDR_B OUT 3", + "SPDIFOUT IN 2", "FRDDR_C OUT 3"; + + assigned-clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + status = "okay"; + + dai-link-0 { + sound-dai = <&frddr_a>; + }; + + dai-link-1 { + sound-dai = <&frddr_b>; + }; + + dai-link-2 { + sound-dai = <&frddr_c>; + }; + + /* 8ch hdmi interface */ + dai-link-3 { + sound-dai = <&tdmif_b>; + dai-format = "i2s"; + dai-tdm-slot-tx-mask-0 = <1 1>; + dai-tdm-slot-tx-mask-1 = <1 1>; + dai-tdm-slot-tx-mask-2 = <1 1>; + dai-tdm-slot-tx-mask-3 = <1 1>; + mclk-fs = <256>; + + codec { + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; + }; + }; + + /* spdif hdmi or toslink interface */ + dai-link-4 { + sound-dai = <&spdifout>; + + codec-0 { + sound-dai = <&spdif_dit>; + }; + + codec-1 { + sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_A>; + }; + }; + + /* spdif hdmi interface */ + dai-link-5 { + sound-dai = <&spdifout_b>; + + codec { + sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_B>; + }; + }; + + /* hdmi glue */ + dai-link-6 { + sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; + + codec { + sound-dai = <&hdmi_tx>; + }; + }; + }; + + wifi32k: wifi32k { + compatible = "pwm-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ + }; +}; + +&arb { + status = "okay"; }; &cec_AO { @@ -125,12 +238,28 @@ hdmi-phandle = <&hdmi_tx>; }; +&clkc_audio { + status = "okay"; +}; + &cvbs_vdac_port { cvbs_vdac_out: endpoint { remote-endpoint = <&cvbs_connector_in>; }; }; +&frddr_a { + status = "okay"; +}; + +&frddr_b { + status = "okay"; +}; + +&frddr_c { + status = "okay"; +}; + &hdmi_tx { status = "okay"; pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; @@ -144,6 +273,46 @@ }; }; +&ir { + status = "okay"; + pinctrl-0 = <&remote_input_ao_pins>; + pinctrl-names = "default"; +}; + +&ext_mdio { + external_phy: ethernet-phy@0 { + /* Realtek RTL8211F (0x001cc916) */ + reg = <0>; + max-speed = <1000>; + eee-broken-1000t; + + reset-assert-us = <10000>; + reset-deassert-us = <30000>; + reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; + + interrupt-parent = <&gpio_intc>; + /* MAC_INTR on GPIOZ_14 */ + interrupts = <26 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +ðmac { + pinctrl-0 = <ð_pins>, <ð_rgmii_pins>; + pinctrl-names = "default"; + status = "okay"; + phy-mode = "rgmii"; + phy-handle = <&external_phy>; + amlogic,tx-delay-ns = <2>; +}; + +&pwm_ef { + status = "okay"; + pinctrl-0 = <&pwm_e_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin0"; +}; + &uart_A { status = "okay"; pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; @@ -153,6 +322,9 @@ bluetooth { compatible = "brcm,bcm43438-bt"; shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; + max-speed = <2000000>; + clocks = <&wifi32k>; + clock-names = "lpo"; }; }; @@ -166,3 +338,88 @@ status = "okay"; dr_mode = "host"; }; + +/* SDIO */ +&sd_emmc_a { + status = "okay"; + pinctrl-0 = <&sdio_pins>; + pinctrl-1 = <&sdio_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + #address-cells = <1>; + #size-cells = <0>; + + bus-width = <4>; + cap-sd-highspeed; + sd-uhs-sdr50; + max-frequency = <100000000>; + + non-removable; + disable-wp; + + mmc-pwrseq = <&sdio_pwrseq>; + + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddao_1v8>; + + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; +}; + +/* SD card */ +&sd_emmc_b { + status = "okay"; + pinctrl-0 = <&sdcard_c_pins>; + pinctrl-1 = <&sdcard_clk_gate_c_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <100000000>; + disable-wp; + + cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddao_3v3>; +}; + +/* eMMC */ +&sd_emmc_c { + status = "okay"; + pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <8>; + cap-mmc-highspeed; + max-frequency = <100000000>; + non-removable; + disable-wp; + + mmc-pwrseq = <&emmc_pwrseq>; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&flash_1v8>; +}; + +&spdifout { + pinctrl-0 = <&spdif_out_h_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&spdifout_b { + status = "okay"; +}; + +&tdmif_b { + status = "okay"; +}; + +&tdmout_b { + status = "okay"; +}; + +&tohdmitx { + status = "okay"; +}; diff --git a/dts/src/arm64/amlogic/meson-g12a.dtsi b/dts/src/arm64/amlogic/meson-g12a.dtsi index 9f72396ba7..f8d43e3dcf 100644 --- a/dts/src/arm64/amlogic/meson-g12a.dtsi +++ b/dts/src/arm64/amlogic/meson-g12a.dtsi @@ -5,10 +5,12 @@ #include <dt-bindings/phy/phy.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/clock/axg-audio-clkc.h> #include <dt-bindings/clock/g12a-clkc.h> #include <dt-bindings/clock/g12a-aoclkc.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/reset/amlogic,meson-axg-audio-arb.h> #include <dt-bindings/reset/amlogic,meson-g12a-reset.h> / { @@ -18,6 +20,39 @@ #address-cells = <2>; #size-cells = <2>; + tdmif_a: audio-controller-0 { + compatible = "amlogic,axg-tdm-iface"; + #sound-dai-cells = <0>; + sound-name-prefix = "TDM_A"; + clocks = <&clkc_audio AUD_CLKID_MST_A_MCLK>, + <&clkc_audio AUD_CLKID_MST_A_SCLK>, + <&clkc_audio AUD_CLKID_MST_A_LRCLK>; + clock-names = "mclk", "sclk", "lrclk"; + status = "disabled"; + }; + + tdmif_b: audio-controller-1 { + compatible = "amlogic,axg-tdm-iface"; + #sound-dai-cells = <0>; + sound-name-prefix = "TDM_B"; + clocks = <&clkc_audio AUD_CLKID_MST_B_MCLK>, + <&clkc_audio AUD_CLKID_MST_B_SCLK>, + <&clkc_audio AUD_CLKID_MST_B_LRCLK>; + clock-names = "mclk", "sclk", "lrclk"; + status = "disabled"; + }; + + tdmif_c: audio-controller-2 { + compatible = "amlogic,axg-tdm-iface"; + #sound-dai-cells = <0>; + sound-name-prefix = "TDM_C"; + clocks = <&clkc_audio AUD_CLKID_MST_C_MCLK>, + <&clkc_audio AUD_CLKID_MST_C_SCLK>, + <&clkc_audio AUD_CLKID_MST_C_LRCLK>; + clock-names = "mclk", "sclk", "lrclk"; + status = "disabled"; + }; + cpus { #address-cells = <0x2>; #size-cells = <0x0>; @@ -102,6 +137,27 @@ #size-cells = <2>; ranges; + ethmac: ethernet@ff3f0000 { + compatible = "amlogic,meson-axg-dwmac", + "snps,dwmac-3.70a", + "snps,dwmac"; + reg = <0x0 0xff3f0000 0x0 0x10000 + 0x0 0xff634540 0x0 0x8>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + clocks = <&clkc CLKID_ETH>, + <&clkc CLKID_FCLK_DIV2>, + <&clkc CLKID_MPLL2>; + clock-names = "stmmaceth", "clkin0", "clkin1"; + status = "disabled"; + + mdio0: mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + }; + }; + apb: bus@ff600000 { compatible = "simple-bus"; reg = <0x0 0xff600000 0x0 0x200000>; @@ -123,6 +179,7 @@ clock-names = "isfr", "iahb", "venci"; #address-cells = <1>; #size-cells = <0>; + #sound-dai-cells = <0>; status = "disabled"; /* VPU VENC Input */ @@ -140,6 +197,19 @@ }; }; + apb_efuse: bus@30000 { + compatible = "simple-bus"; + reg = <0x0 0x30000 0x0 0x2000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0x30000 0x0 0x2000>; + + hwrng: rng@218 { + compatible = "amlogic,meson-rng"; + reg = <0x0 0x218 0x0 0x4>; + }; + }; + periphs: bus@34400 { compatible = "simple-bus"; reg = <0x0 0x34400 0x0 0x400>; @@ -185,12 +255,55 @@ }; }; + emmc_pins: emmc { + mux-0 { + groups = "emmc_nand_d0", + "emmc_nand_d1", + "emmc_nand_d2", + "emmc_nand_d3", + "emmc_nand_d4", + "emmc_nand_d5", + "emmc_nand_d6", + "emmc_nand_d7", + "emmc_cmd"; + function = "emmc"; + bias-pull-up; + drive-strength-microamp = <4000>; + }; + + mux-1 { + groups = "emmc_clk"; + function = "emmc"; + bias-disable; + drive-strength-microamp = <4000>; + }; + }; + + emmc_ds_pins: emmc-ds { + mux { + groups = "emmc_nand_ds"; + function = "emmc"; + bias-pull-down; + drive-strength-microamp = <4000>; + }; + }; + + emmc_clk_gate_pins: emmc_clk_gate { + mux { + groups = "BOOT_8"; + function = "gpio_periphs"; + bias-pull-down; + drive-strength-microamp = <4000>; + }; + }; + hdmitx_ddc_pins: hdmitx_ddc { mux { groups = "hdmitx_sda", "hdmitx_sck"; function = "hdmitx"; bias-disable; + drive-strength-microamp = <4000>; }; }; @@ -202,6 +315,1040 @@ }; }; + + i2c0_sda_c_pins: i2c0-sda-c { + mux { + groups = "i2c0_sda_c"; + function = "i2c0"; + bias-disable; + drive-strength-microamp = <3000>; + + }; + }; + + i2c0_sck_c_pins: i2c0-sck-c { + mux { + groups = "i2c0_sck_c"; + function = "i2c0"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c0_sda_z0_pins: i2c0-sda-z0 { + mux { + groups = "i2c0_sda_z0"; + function = "i2c0"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c0_sck_z1_pins: i2c0-sck-z1 { + mux { + groups = "i2c0_sck_z1"; + function = "i2c0"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c0_sda_z7_pins: i2c0-sda-z7 { + mux { + groups = "i2c0_sda_z7"; + function = "i2c0"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c0_sda_z8_pins: i2c0-sda-z8 { + mux { + groups = "i2c0_sda_z8"; + function = "i2c0"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c1_sda_x_pins: i2c1-sda-x { + mux { + groups = "i2c1_sda_x"; + function = "i2c1"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c1_sck_x_pins: i2c1-sck-x { + mux { + groups = "i2c1_sck_x"; + function = "i2c1"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c1_sda_h2_pins: i2c1-sda-h2 { + mux { + groups = "i2c1_sda_h2"; + function = "i2c1"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c1_sck_h3_pins: i2c1-sck-h3 { + mux { + groups = "i2c1_sck_h3"; + function = "i2c1"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c1_sda_h6_pins: i2c1-sda-h6 { + mux { + groups = "i2c1_sda_h6"; + function = "i2c1"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c1_sck_h7_pins: i2c1-sck-h7 { + mux { + groups = "i2c1_sck_h7"; + function = "i2c1"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c2_sda_x_pins: i2c2-sda-x { + mux { + groups = "i2c2_sda_x"; + function = "i2c2"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c2_sck_x_pins: i2c2-sck-x { + mux { + groups = "i2c2_sck_x"; + function = "i2c2"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c2_sda_z_pins: i2c2-sda-z { + mux { + groups = "i2c2_sda_z"; + function = "i2c2"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c2_sck_z_pins: i2c2-sck-z { + mux { + groups = "i2c2_sck_z"; + function = "i2c2"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c3_sda_h_pins: i2c3-sda-h { + mux { + groups = "i2c3_sda_h"; + function = "i2c3"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c3_sck_h_pins: i2c3-sck-h { + mux { + groups = "i2c3_sck_h"; + function = "i2c3"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c3_sda_a_pins: i2c3-sda-a { + mux { + groups = "i2c3_sda_a"; + function = "i2c3"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c3_sck_a_pins: i2c3-sck-a { + mux { + groups = "i2c3_sck_a"; + function = "i2c3"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + mclk0_a_pins: mclk0-a { + mux { + groups = "mclk0_a"; + function = "mclk0"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + mclk1_a_pins: mclk1-a { + mux { + groups = "mclk1_a"; + function = "mclk1"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + mclk1_x_pins: mclk1-x { + mux { + groups = "mclk1_x"; + function = "mclk1"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + mclk1_z_pins: mclk1-z { + mux { + groups = "mclk1_z"; + function = "mclk1"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + pdm_din0_a_pins: pdm-din0-a { + mux { + groups = "pdm_din0_a"; + function = "pdm"; + bias-disable; + }; + }; + + pdm_din0_c_pins: pdm-din0-c { + mux { + groups = "pdm_din0_c"; + function = "pdm"; + bias-disable; + }; + }; + + pdm_din0_x_pins: pdm-din0-x { + mux { + groups = "pdm_din0_x"; + function = "pdm"; + bias-disable; + }; + }; + + pdm_din0_z_pins: pdm-din0-z { + mux { + groups = "pdm_din0_z"; + function = "pdm"; + bias-disable; + }; + }; + + pdm_din1_a_pins: pdm-din1-a { + mux { + groups = "pdm_din1_a"; + function = "pdm"; + bias-disable; + }; + }; + + pdm_din1_c_pins: pdm-din1-c { + mux { + groups = "pdm_din1_c"; + function = "pdm"; + bias-disable; + }; + }; + + pdm_din1_x_pins: pdm-din1-x { + mux { + groups = "pdm_din1_x"; + function = "pdm"; + bias-disable; + }; + }; + + pdm_din1_z_pins: pdm-din1-z { + mux { + groups = "pdm_din1_z"; + function = "pdm"; + bias-disable; + }; + }; + + pdm_din2_a_pins: pdm-din2-a { + mux { + groups = "pdm_din2_a"; + function = "pdm"; + bias-disable; + }; + }; + + pdm_din2_c_pins: pdm-din2-c { + mux { + groups = "pdm_din2_c"; + function = "pdm"; + bias-disable; + }; + }; + + pdm_din2_x_pins: pdm-din2-x { + mux { + groups = "pdm_din2_x"; + function = "pdm"; + bias-disable; + }; + }; + + pdm_din2_z_pins: pdm-din2-z { + mux { + groups = "pdm_din2_z"; + function = "pdm"; + bias-disable; + }; + }; + + pdm_din3_a_pins: pdm-din3-a { + mux { + groups = "pdm_din3_a"; + function = "pdm"; + bias-disable; + }; + }; + + pdm_din3_c_pins: pdm-din3-c { + mux { + groups = "pdm_din3_c"; + function = "pdm"; + bias-disable; + }; + }; + + pdm_din3_x_pins: pdm-din3-x { + mux { + groups = "pdm_din3_x"; + function = "pdm"; + bias-disable; + }; + }; + + pdm_din3_z_pins: pdm-din3-z { + mux { + groups = "pdm_din3_z"; + function = "pdm"; + bias-disable; + }; + }; + + pdm_dclk_a_pins: pdm-dclk-a { + mux { + groups = "pdm_dclk_a"; + function = "pdm"; + bias-disable; + drive-strength-microamp = <500>; + }; + }; + + pdm_dclk_c_pins: pdm-dclk-c { + mux { + groups = "pdm_dclk_c"; + function = "pdm"; + bias-disable; + drive-strength-microamp = <500>; + }; + }; + + pdm_dclk_x_pins: pdm-dclk-x { + mux { + groups = "pdm_dclk_x"; + function = "pdm"; + bias-disable; + drive-strength-microamp = <500>; + }; + }; + + pdm_dclk_z_pins: pdm-dclk-z { + mux { + groups = "pdm_dclk_z"; + function = "pdm"; + bias-disable; + drive-strength-microamp = <500>; + }; + }; + + pwm_a_pins: pwm-a { + mux { + groups = "pwm_a"; + function = "pwm_a"; + bias-disable; + }; + }; + + pwm_b_x7_pins: pwm-b-x7 { + mux { + groups = "pwm_b_x7"; + function = "pwm_b"; + bias-disable; + }; + }; + + pwm_b_x19_pins: pwm-b-x19 { + mux { + groups = "pwm_b_x19"; + function = "pwm_b"; + bias-disable; + }; + }; + + pwm_c_c_pins: pwm-c-c { + mux { + groups = "pwm_c_c"; + function = "pwm_c"; + bias-disable; + }; + }; + + pwm_c_x5_pins: pwm-c-x5 { + mux { + groups = "pwm_c_x5"; + function = "pwm_c"; + bias-disable; + }; + }; + + pwm_c_x8_pins: pwm-c-x8 { + mux { + groups = "pwm_c_x8"; + function = "pwm_c"; + bias-disable; + }; + }; + + pwm_d_x3_pins: pwm-d-x3 { + mux { + groups = "pwm_d_x3"; + function = "pwm_d"; + bias-disable; + }; + }; + + pwm_d_x6_pins: pwm-d-x6 { + mux { + groups = "pwm_d_x6"; + function = "pwm_d"; + bias-disable; + }; + }; + + pwm_e_pins: pwm-e { + mux { + groups = "pwm_e"; + function = "pwm_e"; + bias-disable; + }; + }; + + pwm_f_x_pins: pwm-f-x { + mux { + groups = "pwm_f_x"; + function = "pwm_f"; + bias-disable; + }; + }; + + pwm_f_h_pins: pwm-f-h { + mux { + groups = "pwm_f_h"; + function = "pwm_f"; + bias-disable; + }; + }; + + sdcard_c_pins: sdcard_c { + mux-0 { + groups = "sdcard_d0_c", + "sdcard_d1_c", + "sdcard_d2_c", + "sdcard_d3_c", + "sdcard_cmd_c"; + function = "sdcard"; + bias-pull-up; + drive-strength-microamp = <4000>; + }; + + mux-1 { + groups = "sdcard_clk_c"; + function = "sdcard"; + bias-disable; + drive-strength-microamp = <4000>; + }; + }; + + sdcard_clk_gate_c_pins: sdcard_clk_gate_c { + mux { + groups = "GPIOC_4"; + function = "gpio_periphs"; + bias-pull-down; + drive-strength-microamp = <4000>; + }; + }; + + sdcard_z_pins: sdcard_z { + mux-0 { + groups = "sdcard_d0_z", + "sdcard_d1_z", + "sdcard_d2_z", + "sdcard_d3_z", + "sdcard_cmd_z"; + function = "sdcard"; + bias-pull-up; + drive-strength-microamp = <4000>; + }; + + mux-1 { + groups = "sdcard_clk_z"; + function = "sdcard"; + bias-disable; + drive-strength-microamp = <4000>; + }; + }; + + sdcard_clk_gate_z_pins: sdcard_clk_gate_z { + mux { + groups = "GPIOZ_6"; + function = "gpio_periphs"; + bias-pull-down; + drive-strength-microamp = <4000>; + }; + }; + + sdio_pins: sdio { + mux { + groups = "sdio_d0", + "sdio_d1", + "sdio_d2", + "sdio_d3", + "sdio_clk", + "sdio_cmd"; + function = "sdio"; + bias-disable; + drive-strength-microamp = <4000>; + }; + }; + + sdio_clk_gate_pins: sdio_clk_gate { + mux { + groups = "GPIOX_4"; + function = "gpio_periphs"; + bias-pull-down; + drive-strength-microamp = <4000>; + }; + }; + + spdif_in_a10_pins: spdif-in-a10 { + mux { + groups = "spdif_in_a10"; + function = "spdif_in"; + bias-disable; + }; + }; + + spdif_in_a12_pins: spdif-in-a12 { + mux { + groups = "spdif_in_a12"; + function = "spdif_in"; + bias-disable; + }; + }; + + spdif_in_h_pins: spdif-in-h { + mux { + groups = "spdif_in_h"; + function = "spdif_in"; + bias-disable; + }; + }; + + spdif_out_h_pins: spdif-out-h { + mux { + groups = "spdif_out_h"; + function = "spdif_out"; + drive-strength-microamp = <500>; + bias-disable; + }; + }; + + spdif_out_a11_pins: spdif-out-a11 { + mux { + groups = "spdif_out_a11"; + function = "spdif_out"; + drive-strength-microamp = <500>; + bias-disable; + }; + }; + + spdif_out_a13_pins: spdif-out-a13 { + mux { + groups = "spdif_out_a13"; + function = "spdif_out"; + drive-strength-microamp = <500>; + bias-disable; + }; + }; + + tdm_a_din0_pins: tdm-a-din0 { + mux { + groups = "tdm_a_din0"; + function = "tdm_a"; + bias-disable; + }; + }; + + + tdm_a_din1_pins: tdm-a-din1 { + mux { + groups = "tdm_a_din1"; + function = "tdm_a"; + bias-disable; + }; + }; + + tdm_a_dout0_pins: tdm-a-dout0 { + mux { + groups = "tdm_a_dout0"; + function = "tdm_a"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_a_dout1_pins: tdm-a-dout1 { + mux { + groups = "tdm_a_dout1"; + function = "tdm_a"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_a_fs_pins: tdm-a-fs { + mux { + groups = "tdm_a_fs"; + function = "tdm_a"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_a_sclk_pins: tdm-a-sclk { + mux { + groups = "tdm_a_sclk"; + function = "tdm_a"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_a_slv_fs_pins: tdm-a-slv-fs { + mux { + groups = "tdm_a_slv_fs"; + function = "tdm_a"; + bias-disable; + }; + }; + + + tdm_a_slv_sclk_pins: tdm-a-slv-sclk { + mux { + groups = "tdm_a_slv_sclk"; + function = "tdm_a"; + bias-disable; + }; + }; + + tdm_b_din0_pins: tdm-b-din0 { + mux { + groups = "tdm_b_din0"; + function = "tdm_b"; + bias-disable; + }; + }; + + tdm_b_din1_pins: tdm-b-din1 { + mux { + groups = "tdm_b_din1"; + function = "tdm_b"; + bias-disable; + }; + }; + + tdm_b_din2_pins: tdm-b-din2 { + mux { + groups = "tdm_b_din2"; + function = "tdm_b"; + bias-disable; + }; + }; + + tdm_b_din3_a_pins: tdm-b-din3-a { + mux { + groups = "tdm_b_din3_a"; + function = "tdm_b"; + bias-disable; + }; + }; + + tdm_b_din3_h_pins: tdm-b-din3-h { + mux { + groups = "tdm_b_din3_h"; + function = "tdm_b"; + bias-disable; + }; + }; + + tdm_b_dout0_pins: tdm-b-dout0 { + mux { + groups = "tdm_b_dout0"; + function = "tdm_b"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_b_dout1_pins: tdm-b-dout1 { + mux { + groups = "tdm_b_dout1"; + function = "tdm_b"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_b_dout2_pins: tdm-b-dout2 { + mux { + groups = "tdm_b_dout2"; + function = "tdm_b"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_b_dout3_a_pins: tdm-b-dout3-a { + mux { + groups = "tdm_b_dout3_a"; + function = "tdm_b"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_b_dout3_h_pins: tdm-b-dout3-h { + mux { + groups = "tdm_b_dout3_h"; + function = "tdm_b"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_b_fs_pins: tdm-b-fs { + mux { + groups = "tdm_b_fs"; + function = "tdm_b"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_b_sclk_pins: tdm-b-sclk { + mux { + groups = "tdm_b_sclk"; + function = "tdm_b"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_b_slv_fs_pins: tdm-b-slv-fs { + mux { + groups = "tdm_b_slv_fs"; + function = "tdm_b"; + bias-disable; + }; + }; + + tdm_b_slv_sclk_pins: tdm-b-slv-sclk { + mux { + groups = "tdm_b_slv_sclk"; + function = "tdm_b"; + bias-disable; + }; + }; + + tdm_c_din0_a_pins: tdm-c-din0-a { + mux { + groups = "tdm_c_din0_a"; + function = "tdm_c"; + bias-disable; + }; + }; + + tdm_c_din0_z_pins: tdm-c-din0-z { + mux { + groups = "tdm_c_din0_z"; + function = "tdm_c"; + bias-disable; + }; + }; + + tdm_c_din1_a_pins: tdm-c-din1-a { + mux { + groups = "tdm_c_din1_a"; + function = "tdm_c"; + bias-disable; + }; + }; + + tdm_c_din1_z_pins: tdm-c-din1-z { + mux { + groups = "tdm_c_din1_z"; + function = "tdm_c"; + bias-disable; + }; + }; + + tdm_c_din2_a_pins: tdm-c-din2-a { + mux { + groups = "tdm_c_din2_a"; + function = "tdm_c"; + bias-disable; + }; + }; + + eth_leds_pins: eth-leds { + mux { + groups = "eth_link_led", + "eth_act_led"; + function = "eth"; + bias-disable; + }; + }; + + eth_pins: eth { + mux { + groups = "eth_mdio", + "eth_mdc", + "eth_rgmii_rx_clk", + "eth_rx_dv", + "eth_rxd0", + "eth_rxd1", + "eth_txen", + "eth_txd0", + "eth_txd1"; + function = "eth"; + drive-strength-microamp = <4000>; + bias-disable; + }; + }; + + eth_rgmii_pins: eth-rgmii { + mux { + groups = "eth_rxd2_rgmii", + "eth_rxd3_rgmii", + "eth_rgmii_tx_clk", + "eth_txd2_rgmii", + "eth_txd3_rgmii"; + function = "eth"; + drive-strength-microamp = <4000>; + bias-disable; + }; + }; + + tdm_c_din2_z_pins: tdm-c-din2-z { + mux { + groups = "tdm_c_din2_z"; + function = "tdm_c"; + bias-disable; + }; + }; + + tdm_c_din3_a_pins: tdm-c-din3-a { + mux { + groups = "tdm_c_din3_a"; + function = "tdm_c"; + bias-disable; + }; + }; + + tdm_c_din3_z_pins: tdm-c-din3-z { + mux { + groups = "tdm_c_din3_z"; + function = "tdm_c"; + bias-disable; + }; + }; + + tdm_c_dout0_a_pins: tdm-c-dout0-a { + mux { + groups = "tdm_c_dout0_a"; + function = "tdm_c"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_c_dout0_z_pins: tdm-c-dout0-z { + mux { + groups = "tdm_c_dout0_z"; + function = "tdm_c"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_c_dout1_a_pins: tdm-c-dout1-a { + mux { + groups = "tdm_c_dout1_a"; + function = "tdm_c"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_c_dout1_z_pins: tdm-c-dout1-z { + mux { + groups = "tdm_c_dout1_z"; + function = "tdm_c"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_c_dout2_a_pins: tdm-c-dout2-a { + mux { + groups = "tdm_c_dout2_a"; + function = "tdm_c"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_c_dout2_z_pins: tdm-c-dout2-z { + mux { + groups = "tdm_c_dout2_z"; + function = "tdm_c"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_c_dout3_a_pins: tdm-c-dout3-a { + mux { + groups = "tdm_c_dout3_a"; + function = "tdm_c"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_c_dout3_z_pins: tdm-c-dout3-z { + mux { + groups = "tdm_c_dout3_z"; + function = "tdm_c"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_c_fs_a_pins: tdm-c-fs-a { + mux { + groups = "tdm_c_fs_a"; + function = "tdm_c"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_c_fs_z_pins: tdm-c-fs-z { + mux { + groups = "tdm_c_fs_z"; + function = "tdm_c"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_c_sclk_a_pins: tdm-c-sclk-a { + mux { + groups = "tdm_c_sclk_a"; + function = "tdm_c"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_c_sclk_z_pins: tdm-c-sclk-z { + mux { + groups = "tdm_c_sclk_z"; + function = "tdm_c"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_c_slv_fs_a_pins: tdm-c-slv-fs-a { + mux { + groups = "tdm_c_slv_fs_a"; + function = "tdm_c"; + bias-disable; + }; + }; + + tdm_c_slv_fs_z_pins: tdm-c-slv-fs-z { + mux { + groups = "tdm_c_slv_fs_z"; + function = "tdm_c"; + bias-disable; + }; + }; + + tdm_c_slv_sclk_a_pins: tdm-c-slv-sclk-a { + mux { + groups = "tdm_c_slv_sclk_a"; + function = "tdm_c"; + bias-disable; + }; + }; + + tdm_c_slv_sclk_z_pins: tdm-c-slv-sclk-z { + mux { + groups = "tdm_c_slv_sclk_z"; + function = "tdm_c"; + bias-disable; + }; + }; + uart_a_pins: uart-a { mux { groups = "uart_a_tx", @@ -303,6 +1450,282 @@ }; }; + pdm: audio-controller@40000 { + compatible = "amlogic,g12a-pdm", + "amlogic,axg-pdm"; + reg = <0x0 0x40000 0x0 0x34>; + #sound-dai-cells = <0>; + sound-name-prefix = "PDM"; + clocks = <&clkc_audio AUD_CLKID_PDM>, + <&clkc_audio AUD_CLKID_PDM_DCLK>, + <&clkc_audio AUD_CLKID_PDM_SYSCLK>; + clock-names = "pclk", "dclk", "sysclk"; + status = "disabled"; + }; + + audio: bus@42000 { + compatible = "simple-bus"; + reg = <0x0 0x42000 0x0 0x2000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0x42000 0x0 0x2000>; + + clkc_audio: clock-controller@0 { + status = "disabled"; + compatible = "amlogic,g12a-audio-clkc"; + reg = <0x0 0x0 0x0 0xb4>; + #clock-cells = <1>; + + clocks = <&clkc CLKID_AUDIO>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL3>, + <&clkc CLKID_HIFI_PLL>, + <&clkc CLKID_FCLK_DIV3>, + <&clkc CLKID_FCLK_DIV4>, + <&clkc CLKID_GP0_PLL>; + clock-names = "pclk", + "mst_in0", + "mst_in1", + "mst_in2", + "mst_in3", + "mst_in4", + "mst_in5", + "mst_in6", + "mst_in7"; + + resets = <&reset RESET_AUDIO>; + }; + + toddr_a: audio-controller@100 { + compatible = "amlogic,g12a-toddr", + "amlogic,axg-toddr"; + reg = <0x0 0x100 0x0 0x1c>; + #sound-dai-cells = <0>; + sound-name-prefix = "TODDR_A"; + interrupts = <GIC_SPI 148 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_TODDR_A>; + resets = <&arb AXG_ARB_TODDR_A>; + status = "disabled"; + }; + + toddr_b: audio-controller@140 { + compatible = "amlogic,g12a-toddr", + "amlogic,axg-toddr"; + reg = <0x0 0x140 0x0 0x1c>; + #sound-dai-cells = <0>; + sound-name-prefix = "TODDR_B"; + interrupts = <GIC_SPI 149 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_TODDR_B>; + resets = <&arb AXG_ARB_TODDR_B>; + status = "disabled"; + }; + + toddr_c: audio-controller@180 { + compatible = "amlogic,g12a-toddr", + "amlogic,axg-toddr"; + reg = <0x0 0x180 0x0 0x1c>; + #sound-dai-cells = <0>; + sound-name-prefix = "TODDR_C"; + interrupts = <GIC_SPI 150 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_TODDR_C>; + resets = <&arb AXG_ARB_TODDR_C>; + status = "disabled"; + }; + + frddr_a: audio-controller@1c0 { + compatible = "amlogic,g12a-frddr", + "amlogic,axg-frddr"; + reg = <0x0 0x1c0 0x0 0x1c>; + #sound-dai-cells = <0>; + sound-name-prefix = "FRDDR_A"; + interrupts = <GIC_SPI 152 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_FRDDR_A>; + resets = <&arb AXG_ARB_FRDDR_A>; + status = "disabled"; + }; + + frddr_b: audio-controller@200 { + compatible = "amlogic,g12a-frddr", + "amlogic,axg-frddr"; + reg = <0x0 0x200 0x0 0x1c>; + #sound-dai-cells = <0>; + sound-name-prefix = "FRDDR_B"; + interrupts = <GIC_SPI 153 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_FRDDR_B>; + resets = <&arb AXG_ARB_FRDDR_B>; + status = "disabled"; + }; + + frddr_c: audio-controller@240 { + compatible = "amlogic,g12a-frddr", + "amlogic,axg-frddr"; + reg = <0x0 0x240 0x0 0x1c>; + #sound-dai-cells = <0>; + sound-name-prefix = "FRDDR_C"; + interrupts = <GIC_SPI 154 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_FRDDR_C>; + resets = <&arb AXG_ARB_FRDDR_C>; + status = "disabled"; + }; + + arb: reset-controller@280 { + status = "disabled"; + compatible = "amlogic,meson-axg-audio-arb"; + reg = <0x0 0x280 0x0 0x4>; + #reset-cells = <1>; + clocks = <&clkc_audio AUD_CLKID_DDR_ARB>; + }; + + tdmin_a: audio-controller@300 { + compatible = "amlogic,g12a-tdmin", + "amlogic,axg-tdmin"; + reg = <0x0 0x300 0x0 0x40>; + sound-name-prefix = "TDMIN_A"; + clocks = <&clkc_audio AUD_CLKID_TDMIN_A>, + <&clkc_audio AUD_CLKID_TDMIN_A_SCLK>, + <&clkc_audio AUD_CLKID_TDMIN_A_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>, + <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + tdmin_b: audio-controller@340 { + compatible = "amlogic,g12a-tdmin", + "amlogic,axg-tdmin"; + reg = <0x0 0x340 0x0 0x40>; + sound-name-prefix = "TDMIN_B"; + clocks = <&clkc_audio AUD_CLKID_TDMIN_B>, + <&clkc_audio AUD_CLKID_TDMIN_B_SCLK>, + <&clkc_audio AUD_CLKID_TDMIN_B_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>, + <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + tdmin_c: audio-controller@380 { + compatible = "amlogic,g12a-tdmin", + "amlogic,axg-tdmin"; + reg = <0x0 0x380 0x0 0x40>; + sound-name-prefix = "TDMIN_C"; + clocks = <&clkc_audio AUD_CLKID_TDMIN_C>, + <&clkc_audio AUD_CLKID_TDMIN_C_SCLK>, + <&clkc_audio AUD_CLKID_TDMIN_C_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>, + <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + tdmin_lb: audio-controller@3c0 { + compatible = "amlogic,g12a-tdmin", + "amlogic,axg-tdmin"; + reg = <0x0 0x3c0 0x0 0x40>; + sound-name-prefix = "TDMIN_LB"; + clocks = <&clkc_audio AUD_CLKID_TDMIN_LB>, + <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK>, + <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>, + <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + spdifin: audio-controller@400 { + compatible = "amlogic,g12a-spdifin", + "amlogic,axg-spdifin"; + reg = <0x0 0x400 0x0 0x30>; + #sound-dai-cells = <0>; + sound-name-prefix = "SPDIFIN"; + interrupts = <GIC_SPI 151 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_SPDIFIN>, + <&clkc_audio AUD_CLKID_SPDIFIN_CLK>; + clock-names = "pclk", "refclk"; + status = "disabled"; + }; + + spdifout: audio-controller@480 { + compatible = "amlogic,g12a-spdifout", + "amlogic,axg-spdifout"; + reg = <0x0 0x480 0x0 0x50>; + #sound-dai-cells = <0>; + sound-name-prefix = "SPDIFOUT"; + clocks = <&clkc_audio AUD_CLKID_SPDIFOUT>, + <&clkc_audio AUD_CLKID_SPDIFOUT_CLK>; + clock-names = "pclk", "mclk"; + status = "disabled"; + }; + + tdmout_a: audio-controller@500 { + compatible = "amlogic,g12a-tdmout"; + reg = <0x0 0x500 0x0 0x40>; + sound-name-prefix = "TDMOUT_A"; + clocks = <&clkc_audio AUD_CLKID_TDMOUT_A>, + <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + tdmout_b: audio-controller@540 { + compatible = "amlogic,g12a-tdmout"; + reg = <0x0 0x540 0x0 0x40>; + sound-name-prefix = "TDMOUT_B"; + clocks = <&clkc_audio AUD_CLKID_TDMOUT_B>, + <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + tdmout_c: audio-controller@580 { + compatible = "amlogic,g12a-tdmout"; + reg = <0x0 0x580 0x0 0x40>; + sound-name-prefix = "TDMOUT_C"; + clocks = <&clkc_audio AUD_CLKID_TDMOUT_C>, + <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + spdifout_b: audio-controller@680 { + compatible = "amlogic,g12a-spdifout", + "amlogic,axg-spdifout"; + reg = <0x0 0x680 0x0 0x50>; + #sound-dai-cells = <0>; + sound-name-prefix = "SPDIFOUT_B"; + clocks = <&clkc_audio AUD_CLKID_SPDIFOUT_B>, + <&clkc_audio AUD_CLKID_SPDIFOUT_B_CLK>; + clock-names = "pclk", "mclk"; + status = "disabled"; + }; + + tohdmitx: audio-controller@744 { + compatible = "amlogic,g12a-tohdmitx"; + reg = <0x0 0x744 0x0 0x4>; + #sound-dai-cells = <1>; + sound-name-prefix = "TOHDMITX"; + status = "disabled"; + }; + }; + usb3_pcie_phy: phy@46000 { compatible = "amlogic,g12a-usb3-pcie-phy"; reg = <0x0 0x46000 0x0 0x2000>; @@ -314,6 +1737,38 @@ assigned-clock-rates = <100000000>; #phy-cells = <1>; }; + + eth_phy: mdio-multiplexer@4c000 { + compatible = "amlogic,g12a-mdio-mux"; + reg = <0x0 0x4c000 0x0 0xa4>; + clocks = <&clkc CLKID_ETH_PHY>, + <&xtal>, + <&clkc CLKID_MPLL_50M>; + clock-names = "pclk", "clkin0", "clkin1"; + mdio-parent-bus = <&mdio0>; + #address-cells = <1>; + #size-cells = <0>; + + ext_mdio: mdio@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + int_mdio: mdio@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + internal_ephy: ethernet_phy@8 { + compatible = "ethernet-phy-id0180.3301", + "ethernet-phy-ieee802.3-c22"; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + reg = <8>; + max-speed = <100>; + }; + }; + }; }; aobus: bus@ff800000 { @@ -401,6 +1856,145 @@ gpio-ranges = <&ao_pinctrl 0 0 15>; }; + i2c_ao_sck_pins: i2c_ao_sck_pins { + mux { + groups = "i2c_ao_sck"; + function = "i2c_ao"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c_ao_sda_pins: i2c_ao_sda { + mux { + groups = "i2c_ao_sda"; + function = "i2c_ao"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c_ao_sck_e_pins: i2c_ao_sck_e { + mux { + groups = "i2c_ao_sck_e"; + function = "i2c_ao"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c_ao_sda_e_pins: i2c_ao_sda_e { + mux { + groups = "i2c_ao_sda_e"; + function = "i2c_ao"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + mclk0_ao_pins: mclk0-ao { + mux { + groups = "mclk0_ao"; + function = "mclk0_ao"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_ao_b_din0_pins: tdm-ao-b-din0 { + mux { + groups = "tdm_ao_b_din0"; + function = "tdm_ao_b"; + bias-disable; + }; + }; + + spdif_ao_out_pins: spdif-ao-out { + mux { + groups = "spdif_ao_out"; + function = "spdif_ao_out"; + drive-strength-microamp = <500>; + bias-disable; + }; + }; + + tdm_ao_b_din1_pins: tdm-ao-b-din1 { + mux { + groups = "tdm_ao_b_din1"; + function = "tdm_ao_b"; + bias-disable; + }; + }; + + tdm_ao_b_din2_pins: tdm-ao-b-din2 { + mux { + groups = "tdm_ao_b_din2"; + function = "tdm_ao_b"; + bias-disable; + }; + }; + + tdm_ao_b_dout0_pins: tdm-ao-b-dout0 { + mux { + groups = "tdm_ao_b_dout0"; + function = "tdm_ao_b"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_ao_b_dout1_pins: tdm-ao-b-dout1 { + mux { + groups = "tdm_ao_b_dout1"; + function = "tdm_ao_b"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_ao_b_dout2_pins: tdm-ao-b-dout2 { + mux { + groups = "tdm_ao_b_dout2"; + function = "tdm_ao_b"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_ao_b_fs_pins: tdm-ao-b-fs { + mux { + groups = "tdm_ao_b_fs"; + function = "tdm_ao_b"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_ao_b_sclk_pins: tdm-ao-b-sclk { + mux { + groups = "tdm_ao_b_sclk"; + function = "tdm_ao_b"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_ao_b_slv_fs_pins: tdm-ao-b-slv-fs { + mux { + groups = "tdm_ao_b_slv_fs"; + function = "tdm_ao_b"; + bias-disable; + }; + }; + + tdm_ao_b_slv_sclk_pins: tdm-ao-b-slv-sclk { + mux { + groups = "tdm_ao_b_slv_sclk"; + function = "tdm_ao_b"; + bias-disable; + }; + }; + uart_ao_a_pins: uart-a-ao { mux { groups = "uart_ao_a_tx", @@ -418,6 +2012,69 @@ bias-disable; }; }; + + pwm_ao_a_pins: pwm-ao-a { + mux { + groups = "pwm_ao_a"; + function = "pwm_ao_a"; + bias-disable; + }; + }; + + pwm_ao_b_pins: pwm-ao-b { + mux { + groups = "pwm_ao_b"; + function = "pwm_ao_b"; + bias-disable; + }; + }; + + pwm_ao_c_4_pins: pwm-ao-c-4 { + mux { + groups = "pwm_ao_c_4"; + function = "pwm_ao_c"; + bias-disable; + }; + }; + + pwm_ao_c_6_pins: pwm-ao-c-6 { + mux { + groups = "pwm_ao_c_6"; + function = "pwm_ao_c"; + bias-disable; + }; + }; + + pwm_ao_d_5_pins: pwm-ao-d-5 { + mux { + groups = "pwm_ao_d_5"; + function = "pwm_ao_d"; + bias-disable; + }; + }; + + pwm_ao_d_10_pins: pwm-ao-d-10 { + mux { + groups = "pwm_ao_d_10"; + function = "pwm_ao_d"; + bias-disable; + }; + }; + + pwm_ao_d_e_pins: pwm-ao-d-e { + mux { + groups = "pwm_ao_d_e"; + function = "pwm_ao_d"; + }; + }; + + remote_input_ao_pins: remote-input-ao { + mux { + groups = "remote_ao_input"; + function = "remote_ao_input"; + bias-disable; + }; + }; }; }; @@ -445,12 +2102,19 @@ status = "disabled"; }; + pwm_AO_cd: pwm@2000 { + compatible = "amlogic,meson-g12a-ao-pwm-cd"; + reg = <0x0 0x2000 0x0 0x20>; + #pwm-cells = <3>; + status = "disabled"; + }; + uart_AO: serial@3000 { compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart"; reg = <0x0 0x3000 0x0 0x18>; interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>; - clocks = <&xtal>, <&xtal>, <&xtal>; + clocks = <&xtal>, <&clkc_AO CLKID_AO_UART>, <&xtal>; clock-names = "xtal", "pclk", "baud"; status = "disabled"; }; @@ -460,11 +2124,35 @@ "amlogic,meson-ao-uart"; reg = <0x0 0x4000 0x0 0x18>; interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>; - clocks = <&xtal>, <&xtal>, <&xtal>; + clocks = <&xtal>, <&clkc_AO CLKID_AO_UART2>, <&xtal>; clock-names = "xtal", "pclk", "baud"; status = "disabled"; }; + i2c_AO: i2c@5000 { + compatible = "amlogic,meson-axg-i2c"; + status = "disabled"; + reg = <0x0 0x05000 0x0 0x20>; + interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clkc CLKID_I2C>; + }; + + pwm_AO_ab: pwm@7000 { + compatible = "amlogic,meson-g12a-ao-pwm-ab"; + reg = <0x0 0x7000 0x0 0x20>; + #pwm-cells = <3>; + status = "disabled"; + }; + + ir: ir@8000 { + compatible = "amlogic,meson-gxbb-ir"; + reg = <0x0 0x8000 0x0 0x20>; + interrupts = <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + }; + saradc: adc@9000 { compatible = "amlogic,meson-g12a-saradc", "amlogic,meson-saradc"; @@ -533,6 +2221,76 @@ #reset-cells = <1>; }; + gpio_intc: interrupt-controller@f080 { + compatible = "amlogic,meson-g12a-gpio-intc", + "amlogic,meson-gpio-intc"; + reg = <0x0 0xf080 0x0 0x10>; + interrupt-controller; + #interrupt-cells = <2>; + amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>; + }; + + pwm_ef: pwm@19000 { + compatible = "amlogic,meson-g12a-ee-pwm"; + reg = <0x0 0x19000 0x0 0x20>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm_cd: pwm@1a000 { + compatible = "amlogic,meson-g12a-ee-pwm"; + reg = <0x0 0x1a000 0x0 0x20>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm_ab: pwm@1b000 { + compatible = "amlogic,meson-g12a-ee-pwm"; + reg = <0x0 0x1b000 0x0 0x20>; + #pwm-cells = <3>; + status = "disabled"; + }; + + i2c3: i2c@1c000 { + compatible = "amlogic,meson-axg-i2c"; + status = "disabled"; + reg = <0x0 0x1c000 0x0 0x20>; + interrupts = <GIC_SPI 39 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clkc CLKID_I2C>; + }; + + i2c2: i2c@1d000 { + compatible = "amlogic,meson-axg-i2c"; + status = "disabled"; + reg = <0x0 0x1d000 0x0 0x20>; + interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clkc CLKID_I2C>; + }; + + i2c1: i2c@1e000 { + compatible = "amlogic,meson-axg-i2c"; + status = "disabled"; + reg = <0x0 0x1e000 0x0 0x20>; + interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clkc CLKID_I2C>; + }; + + i2c0: i2c@1f000 { + compatible = "amlogic,meson-axg-i2c"; + status = "disabled"; + reg = <0x0 0x1f000 0x0 0x20>; + interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clkc CLKID_I2C>; + }; + clk_msr: clock-measure@18000 { compatible = "amlogic,meson-g12a-clk-measure"; reg = <0x0 0x18000 0x0 0x10>; @@ -566,6 +2324,43 @@ }; }; + sd_emmc_a: sd@ffe03000 { + compatible = "amlogic,meson-axg-mmc"; + reg = <0x0 0xffe03000 0x0 0x800>; + interrupts = <GIC_SPI 189 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + clocks = <&clkc CLKID_SD_EMMC_A>, + <&clkc CLKID_SD_EMMC_A_CLK0>, + <&clkc CLKID_FCLK_DIV2>; + clock-names = "core", "clkin0", "clkin1"; + resets = <&reset RESET_SD_EMMC_A>; + amlogic,dram-access-quirk; + }; + + sd_emmc_b: sd@ffe05000 { + compatible = "amlogic,meson-axg-mmc"; + reg = <0x0 0xffe05000 0x0 0x800>; + interrupts = <GIC_SPI 190 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + clocks = <&clkc CLKID_SD_EMMC_B>, + <&clkc CLKID_SD_EMMC_B_CLK0>, + <&clkc CLKID_FCLK_DIV2>; + clock-names = "core", "clkin0", "clkin1"; + resets = <&reset RESET_SD_EMMC_B>; + }; + + sd_emmc_c: mmc@ffe07000 { + compatible = "amlogic,meson-axg-mmc"; + reg = <0x0 0xffe07000 0x0 0x800>; + interrupts = <GIC_SPI 191 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + clocks = <&clkc CLKID_SD_EMMC_C>, + <&clkc CLKID_SD_EMMC_C_CLK0>, + <&clkc CLKID_FCLK_DIV2>; + clock-names = "core", "clkin0", "clkin1"; + resets = <&reset RESET_SD_EMMC_C>; + }; + usb: usb@ffe09000 { status = "disabled"; compatible = "amlogic,meson-g12a-usb-ctrl"; diff --git a/dts/src/arm64/amlogic/meson-g12b-odroid-n2.dts b/dts/src/arm64/amlogic/meson-g12b-odroid-n2.dts new file mode 100644 index 0000000000..81780ffcc7 --- /dev/null +++ b/dts/src/arm64/amlogic/meson-g12b-odroid-n2.dts @@ -0,0 +1,386 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 BayLibre, SAS + * Author: Neil Armstrong <narmstrong@baylibre.com> + */ + +/dts-v1/; + +#include "meson-g12b.dtsi" +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/meson-g12a-gpio.h> +#include <dt-bindings/sound/meson-g12a-tohdmitx.h> + +/ { + compatible = "hardkernel,odroid-n2", "amlogic,g12b"; + model = "Hardkernel ODROID-N2"; + + aliases { + serial0 = &uart_AO; + ethernet0 = ðmac; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x40000000>; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>; + }; + + leds { + compatible = "gpio-leds"; + + blue { + label = "n2:blue"; + gpios = <&gpio_ao GPIOAO_11 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + tflash_vdd: regulator-tflash_vdd { + compatible = "regulator-fixed"; + + regulator-name = "TFLASH_VDD"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&gpio_ao GPIOAO_8 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + tf_io: gpio-regulator-tf_io { + compatible = "regulator-gpio"; + + regulator-name = "TF_IO"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>; + gpios-states = <0>; + + states = <3300000 0 + 1800000 1>; + }; + + flash_1v8: regulator-flash_1v8 { + compatible = "regulator-fixed"; + regulator-name = "FLASH_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_3v3>; + regulator-always-on; + }; + + main_12v: regulator-main_12v { + compatible = "regulator-fixed"; + regulator-name = "12V"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + }; + + vcc_5v: regulator-vcc_5v { + compatible = "regulator-fixed"; + regulator-name = "5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + vin-supply = <&main_12v>; + }; + + vcc_1v8: regulator-vcc_1v8 { + compatible = "regulator-fixed"; + regulator-name = "VCC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_3v3>; + regulator-always-on; + }; + + vcc_3v3: regulator-vcc_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + /* FIXME: actually controlled by VDDCPU_B_EN */ + }; + + hub_5v: regulator-hub_5v { + compatible = "regulator-fixed"; + regulator-name = "HUB_5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc_5v>; + + /* Connected to the Hub CHIPENABLE, LOW sets low power state */ + gpio = <&gpio GPIOH_5 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + usb_pwr_en: regulator-usb_pwr_en { + compatible = "regulator-fixed"; + regulator-name = "USB_PWR_EN"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc_5v>; + + /* Connected to the microUSB port power enable */ + gpio = <&gpio GPIOH_6 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vddao_1v8: regulator-vddao_1v8 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + }; + + vddao_3v3: regulator-vddao_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&main_12v>; + regulator-always-on; + }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_tmds_out>; + }; + }; + }; + + sound { + compatible = "amlogic,axg-sound-card"; + model = "G12A-ODROIDN2"; + audio-aux-devs = <&tdmout_b>; + audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1", + "TDMOUT_B IN 1", "FRDDR_B OUT 1", + "TDMOUT_B IN 2", "FRDDR_C OUT 1", + "TDM_B Playback", "TDMOUT_B OUT"; + + assigned-clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + status = "okay"; + + dai-link-0 { + sound-dai = <&frddr_a>; + }; + + dai-link-1 { + sound-dai = <&frddr_b>; + }; + + dai-link-2 { + sound-dai = <&frddr_c>; + }; + + /* 8ch hdmi interface */ + dai-link-3 { + sound-dai = <&tdmif_b>; + dai-format = "i2s"; + dai-tdm-slot-tx-mask-0 = <1 1>; + dai-tdm-slot-tx-mask-1 = <1 1>; + dai-tdm-slot-tx-mask-2 = <1 1>; + dai-tdm-slot-tx-mask-3 = <1 1>; + mclk-fs = <256>; + + codec { + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; + }; + }; + + /* hdmi glue */ + dai-link-4 { + sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; + + codec { + sound-dai = <&hdmi_tx>; + }; + }; + }; +}; + +&arb { + status = "okay"; +}; + +&cec_AO { + pinctrl-0 = <&cec_ao_a_h_pins>; + pinctrl-names = "default"; + status = "disabled"; + hdmi-phandle = <&hdmi_tx>; +}; + +&cecb_AO { + pinctrl-0 = <&cec_ao_b_h_pins>; + pinctrl-names = "default"; + status = "okay"; + hdmi-phandle = <&hdmi_tx>; +}; + +&clkc_audio { + status = "okay"; +}; + +&ext_mdio { + external_phy: ethernet-phy@0 { + /* Realtek RTL8211F (0x001cc916) */ + reg = <0>; + max-speed = <1000>; + + reset-assert-us = <10000>; + reset-deassert-us = <30000>; + reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; + + interrupt-parent = <&gpio_intc>; + /* MAC_INTR on GPIOZ_14 */ + interrupts = <26 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +ðmac { + pinctrl-0 = <ð_pins>, <ð_rgmii_pins>; + pinctrl-names = "default"; + status = "okay"; + phy-mode = "rgmii"; + phy-handle = <&external_phy>; + amlogic,tx-delay-ns = <2>; +}; + +&frddr_a { + status = "okay"; +}; + +&frddr_b { + status = "okay"; +}; + +&frddr_c { + status = "okay"; +}; + +&gpio { + /* + * WARNING: The USB Hub on the Odroid-N2 needs a reset signal + * to be turned high in order to be detected by the USB Controller + * This signal should be handled by a USB specific power sequence + * in order to reset the Hub when USB bus is powered down. + */ + usb-hub { + gpio-hog; + gpios = <GPIOH_4 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "usb-hub-reset"; + }; +}; + +&hdmi_tx { + status = "okay"; + pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; + pinctrl-names = "default"; + hdmi-supply = <&vcc_5v>; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; +}; + +&ir { + status = "okay"; + pinctrl-0 = <&remote_input_ao_pins>; + pinctrl-names = "default"; +}; + +/* SD card */ +&sd_emmc_b { + status = "okay"; + pinctrl-0 = <&sdcard_c_pins>; + pinctrl-1 = <&sdcard_clk_gate_c_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <50000000>; + disable-wp; + + cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; + vmmc-supply = <&tflash_vdd>; + vqmmc-supply = <&tf_io>; + +}; + +/* eMMC */ +&sd_emmc_c { + status = "okay"; + pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <8>; + cap-mmc-highspeed; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + max-frequency = <200000000>; + disable-wp; + + mmc-pwrseq = <&emmc_pwrseq>; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&flash_1v8>; +}; + +&tdmif_b { + status = "okay"; +}; + +&tdmout_b { + status = "okay"; +}; + +&tohdmitx { + status = "okay"; +}; + +&uart_AO { + status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; +}; + +&usb { + status = "okay"; + vbus-supply = <&usb_pwr_en>; +}; + +&usb2_phy0 { + phy-supply = <&vcc_5v>; +}; + +&usb2_phy1 { + /* Enable the hub which is connected to this port */ + phy-supply = <&hub_5v>; +}; diff --git a/dts/src/arm64/amlogic/meson-g12b.dtsi b/dts/src/arm64/amlogic/meson-g12b.dtsi new file mode 100644 index 0000000000..9e88e513b2 --- /dev/null +++ b/dts/src/arm64/amlogic/meson-g12b.dtsi @@ -0,0 +1,82 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 BayLibre, SAS + * Author: Neil Armstrong <narmstrong@baylibre.com> + */ + +#include "meson-g12a.dtsi" + +/ { + compatible = "amlogic,g12b"; + + cpus { + cpu-map { + cluster0 { + core0 { + cpu = <&cpu0>; + }; + + core1 { + cpu = <&cpu1>; + }; + }; + + cluster1 { + core0 { + cpu = <&cpu100>; + }; + + core1 { + cpu = <&cpu101>; + }; + + core2 { + cpu = <&cpu102>; + }; + + core3 { + cpu = <&cpu103>; + }; + }; + }; + + /delete-node/ cpu@2; + /delete-node/ cpu@3; + + cpu100: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a73"; + reg = <0x0 0x100>; + enable-method = "psci"; + next-level-cache = <&l2>; + }; + + cpu101: cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a73"; + reg = <0x0 0x101>; + enable-method = "psci"; + next-level-cache = <&l2>; + }; + + cpu102: cpu@102 { + device_type = "cpu"; + compatible = "arm,cortex-a73"; + reg = <0x0 0x102>; + enable-method = "psci"; + next-level-cache = <&l2>; + }; + + cpu103: cpu@103 { + device_type = "cpu"; + compatible = "arm,cortex-a73"; + reg = <0x0 0x103>; + enable-method = "psci"; + next-level-cache = <&l2>; + }; + }; +}; + +&clkc { + compatible = "amlogic,g12b-clkc"; +}; diff --git a/dts/src/arm64/amlogic/meson-gx-p23x-q20x.dtsi b/dts/src/arm64/amlogic/meson-gx-p23x-q20x.dtsi index 016641a416..a9b778571c 100644 --- a/dts/src/arm64/amlogic/meson-gx-p23x-q20x.dtsi +++ b/dts/src/arm64/amlogic/meson-gx-p23x-q20x.dtsi @@ -164,7 +164,7 @@ bus-width = <4>; cap-sd-highspeed; - max-frequency = <100000000>; + max-frequency = <50000000>; non-removable; disable-wp; @@ -184,7 +184,7 @@ bus-width = <4>; cap-sd-highspeed; - max-frequency = <100000000>; + max-frequency = <50000000>; disable-wp; cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm64/amlogic/meson-gx.dtsi b/dts/src/arm64/amlogic/meson-gx.dtsi index 6772709b9e..74d03fc706 100644 --- a/dts/src/arm64/amlogic/meson-gx.dtsi +++ b/dts/src/arm64/amlogic/meson-gx.dtsi @@ -486,7 +486,9 @@ }; ethmac: ethernet@c9410000 { - compatible = "amlogic,meson-gx-dwmac", "amlogic,meson-gxbb-dwmac", "snps,dwmac"; + compatible = "amlogic,meson-gxbb-dwmac", + "snps,dwmac-3.70a", + "snps,dwmac"; reg = <0x0 0xc9410000 0x0 0x10000 0x0 0xc8834540 0x0 0x4>; interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; diff --git a/dts/src/arm64/amlogic/meson-gxbb-nanopi-k2.dts b/dts/src/arm64/amlogic/meson-gxbb-nanopi-k2.dts index ade2ee09ae..c34c1c90cc 100644 --- a/dts/src/arm64/amlogic/meson-gxbb-nanopi-k2.dts +++ b/dts/src/arm64/amlogic/meson-gxbb-nanopi-k2.dts @@ -154,10 +154,6 @@ amlogic,tx-delay-ns = <2>; - snps,reset-gpio = <&gpio GPIOZ_14 0>; - snps,reset-delays-us = <0 10000 1000000>; - snps,reset-active-low; - mdio { compatible = "snps,dwmac-mdio"; #address-cells = <1>; @@ -166,6 +162,11 @@ eth_phy0: ethernet-phy@0 { /* Realtek RTL8211F (0x001cc916) */ reg = <0>; + + reset-assert-us = <10000>; + reset-deassert-us = <30000>; + reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>; + interrupt-parent = <&gpio_intc>; /* MAC_INTR on GPIOZ_15 */ interrupts = <29 IRQ_TYPE_LEVEL_LOW>; @@ -273,7 +274,7 @@ bus-width = <4>; cap-sd-highspeed; - max-frequency = <200000000>; + max-frequency = <50000000>; non-removable; disable-wp; @@ -301,8 +302,8 @@ sd-uhs-sdr12; sd-uhs-sdr25; sd-uhs-sdr50; - sd-uhs-sdr104; - max-frequency = <200000000>; + sd-uhs-ddr50; + max-frequency = <100000000>; disable-wp; cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm64/amlogic/meson-gxbb-nexbox-a95x.dts b/dts/src/arm64/amlogic/meson-gxbb-nexbox-a95x.dts index 25105ac96d..b636912a27 100644 --- a/dts/src/arm64/amlogic/meson-gxbb-nexbox-a95x.dts +++ b/dts/src/arm64/amlogic/meson-gxbb-nexbox-a95x.dts @@ -162,10 +162,6 @@ phy-handle = <ð_phy0>; phy-mode = "rmii"; - snps,reset-gpio = <&gpio GPIOZ_14 0>; - snps,reset-delays-us = <0 10000 1000000>; - snps,reset-active-low; - mdio { compatible = "snps,dwmac-mdio"; #address-cells = <1>; @@ -174,6 +170,10 @@ eth_phy0: ethernet-phy@0 { /* IC Plus IP101GR (0x02430c54) */ reg = <0>; + + reset-assert-us = <10000>; + reset-deassert-us = <10000>; + reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>; }; }; }; @@ -235,7 +235,7 @@ bus-width = <4>; cap-sd-highspeed; - max-frequency = <100000000>; + max-frequency = <50000000>; disable-wp; cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm64/amlogic/meson-gxbb-odroidc2.dts b/dts/src/arm64/amlogic/meson-gxbb-odroidc2.dts index 1cc9dc68ef..9972b1515d 100644 --- a/dts/src/arm64/amlogic/meson-gxbb-odroidc2.dts +++ b/dts/src/arm64/amlogic/meson-gxbb-odroidc2.dts @@ -126,10 +126,6 @@ phy-handle = <ð_phy0>; phy-mode = "rgmii"; - snps,reset-gpio = <&gpio GPIOZ_14 0>; - snps,reset-delays-us = <0 10000 1000000>; - snps,reset-active-low; - amlogic,tx-delay-ns = <2>; mdio { @@ -140,6 +136,11 @@ eth_phy0: ethernet-phy@0 { /* Realtek RTL8211F (0x001cc916) */ reg = <0>; + + reset-assert-us = <10000>; + reset-deassert-us = <30000>; + reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>; + interrupt-parent = <&gpio_intc>; /* MAC_INTR on GPIOZ_15 */ interrupts = <29 IRQ_TYPE_LEVEL_LOW>; @@ -255,6 +256,10 @@ bus-width = <4>; cap-sd-highspeed; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-ddr50; max-frequency = <100000000>; disable-wp; @@ -272,7 +277,7 @@ pinctrl-names = "default", "clk-gate"; bus-width = <8>; - max-frequency = <100000000>; + max-frequency = <200000000>; non-removable; disable-wp; cap-mmc-highspeed; diff --git a/dts/src/arm64/amlogic/meson-gxbb-p200.dts b/dts/src/arm64/amlogic/meson-gxbb-p200.dts index 9d2406a7c4..3c93d1898b 100644 --- a/dts/src/arm64/amlogic/meson-gxbb-p200.dts +++ b/dts/src/arm64/amlogic/meson-gxbb-p200.dts @@ -68,10 +68,6 @@ amlogic,tx-delay-ns = <2>; - snps,reset-gpio = <&gpio GPIOZ_14 0>; - snps,reset-delays-us = <0 10000 1000000>; - snps,reset-active-low; - mdio { compatible = "snps,dwmac-mdio"; #address-cells = <1>; @@ -80,6 +76,11 @@ eth_phy0: ethernet-phy@3 { /* Micrel KSZ9031 (0x00221620) */ reg = <3>; + + reset-assert-us = <10000>; + reset-deassert-us = <30000>; + reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>; + interrupt-parent = <&gpio_intc>; /* MAC_INTR on GPIOZ_15 */ interrupts = <29 IRQ_TYPE_LEVEL_LOW>; diff --git a/dts/src/arm64/amlogic/meson-gxbb-p20x.dtsi b/dts/src/arm64/amlogic/meson-gxbb-p20x.dtsi index 0be0f2a5d2..e8f925871e 100644 --- a/dts/src/arm64/amlogic/meson-gxbb-p20x.dtsi +++ b/dts/src/arm64/amlogic/meson-gxbb-p20x.dtsi @@ -165,7 +165,7 @@ bus-width = <4>; cap-sd-highspeed; - max-frequency = <100000000>; + max-frequency = <50000000>; non-removable; disable-wp; diff --git a/dts/src/arm64/amlogic/meson-gxbb-vega-s95.dtsi b/dts/src/arm64/amlogic/meson-gxbb-vega-s95.dtsi index ad4d50bd9d..43b11e3dfe 100644 --- a/dts/src/arm64/amlogic/meson-gxbb-vega-s95.dtsi +++ b/dts/src/arm64/amlogic/meson-gxbb-vega-s95.dtsi @@ -28,10 +28,10 @@ }; }; - usb_vbus: regulator-usb0-vbus { + usb_pwr: regulator-usb-pwrs { compatible = "regulator-fixed"; - regulator-name = "USB0_VBUS"; + regulator-name = "USB_PWR"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; @@ -40,20 +40,34 @@ enable-active-high; }; - vcc_3v3: regulator-vcc_3v3 { + vddio_boot: regulator-vddio_boot { compatible = "regulator-fixed"; - regulator-name = "VCC_3V3"; + regulator-name = "VDDIO_BOOT"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vddao_3v3: regulator-vddao_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_3V3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; - vcc_1v8: regulator-vcc_1v8 { + vddio_ao18: regulator-vddio_ao18 { compatible = "regulator-fixed"; - regulator-name = "VCC_1V8"; + regulator-name = "VDDIO_AO18"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; + vcc_3v3: regulator-vcc_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + emmc_pwrseq: emmc-pwrseq { compatible = "mmc-pwrseq-emmc"; reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; @@ -66,15 +80,32 @@ pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ }; + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_tmds_out>; + }; + }; + }; + sdio_pwrseq: sdio-pwrseq { compatible = "mmc-pwrseq-simple"; - reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>, - <&gpio GPIOX_20 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; clocks = <&wifi32k>; clock-names = "ext_clock"; }; }; +&cec_AO { + status = "okay"; + pinctrl-0 = <&ao_cec_pins>; + pinctrl-names = "default"; + hdmi-phandle = <&hdmi_tx>; +}; + ðmac { status = "okay"; pinctrl-0 = <ð_rgmii_pins>; @@ -85,10 +116,6 @@ amlogic,tx-delay-ns = <2>; - snps,reset-gpio = <&gpio GPIOZ_14 0>; - snps,reset-delays-us = <0 10000 1000000>; - snps,reset-active-low; - mdio { compatible = "snps,dwmac-mdio"; #address-cells = <1>; @@ -97,10 +124,30 @@ eth_phy0: ethernet-phy@0 { /* Realtek RTL8211F (0x001cc916) */ reg = <0>; + + reset-assert-us = <10000>; + reset-deassert-us = <30000>; + reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>; + + interrupt-parent = <&gpio_intc>; + /* MAC_INTR on GPIOZ_15 */ + interrupts = <29 IRQ_TYPE_LEVEL_LOW>; }; }; }; +&hdmi_tx { + status = "okay"; + pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; + pinctrl-names = "default"; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; +}; + &ir { status = "okay"; pinctrl-0 = <&remote_input_ao_pins>; @@ -115,10 +162,15 @@ clock-names = "clkin0"; }; +&saradc { + status = "okay"; + vref-supply = <&vddio_ao18>; +}; + /* Wireless SDIO Module */ &sd_emmc_a { status = "okay"; - pinctrl-0 = <&sdio_pins &sdio_irq_pins>; + pinctrl-0 = <&sdio_pins>; pinctrl-1 = <&sdio_clk_gate_pins>; pinctrl-names = "default", "clk-gate"; #address-cells = <1>; @@ -126,15 +178,15 @@ bus-width = <4>; cap-sd-highspeed; - max-frequency = <100000000>; + max-frequency = <50000000>; non-removable; disable-wp; mmc-pwrseq = <&sdio_pwrseq>; - vmmc-supply = <&vcc_3v3>; - vqmmc-supply = <&vcc_1v8>; + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddio_boot>; brcmf: wifi@1 { reg = <1>; @@ -151,12 +203,13 @@ bus-width = <4>; cap-sd-highspeed; - max-frequency = <100000000>; + max-frequency = <50000000>; disable-wp; cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; - vmmc-supply = <&vcc_3v3>; + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vcc_3v3>; }; /* eMMC */ @@ -176,9 +229,22 @@ mmc-pwrseq = <&emmc_pwrseq>; vmmc-supply = <&vcc_3v3>; - vmmcq-sumpply = <&vcc_1v8>; + vqmmc-supply = <&vddio_boot>; +}; + +/* This is connected to the Bluetooth module: */ +&uart_A { + status = "okay"; + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; + pinctrl-names = "default"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + shutdown-gpios = <&gpio GPIOX_20 GPIO_ACTIVE_HIGH>; + }; }; +/* This UART is brought out to the DB9 connector */ &uart_AO { status = "okay"; pinctrl-0 = <&uart_ao_a_pins>; @@ -187,7 +253,7 @@ &usb0_phy { status = "okay"; - phy-supply = <&usb_vbus>; + phy-supply = <&usb_pwr>; }; &usb1_phy { diff --git a/dts/src/arm64/amlogic/meson-gxbb-wetek.dtsi b/dts/src/arm64/amlogic/meson-gxbb-wetek.dtsi index 2d2db783c4..4c539881fb 100644 --- a/dts/src/arm64/amlogic/meson-gxbb-wetek.dtsi +++ b/dts/src/arm64/amlogic/meson-gxbb-wetek.dtsi @@ -59,6 +59,13 @@ regulator-max-microvolt = <3300000>; }; + vddio_ao18: regulator-vddio_ao18 { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_AO18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vcc_3v3: regulator-vcc_3v3 { compatible = "regulator-fixed"; regulator-name = "VCC_3V3"; @@ -130,10 +137,6 @@ amlogic,tx-delay-ns = <2>; - snps,reset-gpio = <&gpio GPIOZ_14 0>; - snps,reset-delays-us = <0 10000 1000000>; - snps,reset-active-low; - mdio { compatible = "snps,dwmac-mdio"; #address-cells = <1>; @@ -142,6 +145,10 @@ eth_phy0: ethernet-phy@0 { /* Realtek RTL8211F (0x001cc916) */ reg = <0>; + + reset-assert-us = <10000>; + reset-deassert-us = <30000>; + reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>; }; }; }; @@ -172,6 +179,11 @@ clock-names = "clkin0"; }; +&saradc { + status = "okay"; + vref-supply = <&vddio_ao18>; +}; + /* Wireless SDIO Module */ &sd_emmc_a { status = "okay"; @@ -183,7 +195,7 @@ bus-width = <4>; cap-sd-highspeed; - max-frequency = <100000000>; + max-frequency = <50000000>; non-removable; disable-wp; @@ -208,7 +220,7 @@ bus-width = <4>; cap-sd-highspeed; - max-frequency = <100000000>; + max-frequency = <50000000>; disable-wp; cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; @@ -237,6 +249,19 @@ vqmmc-supply = <&vddio_boot>; }; +/* This is connected to the Bluetooth module: */ +&uart_A { + status = "okay"; + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; + pinctrl-names = "default"; + uart-has-rtscts; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + shutdown-gpios = <&gpio GPIOX_20 GPIO_ACTIVE_HIGH>; + }; +}; + /* This UART is brought out to the DB9 connector */ &uart_AO { status = "okay"; diff --git a/dts/src/arm64/amlogic/meson-gxbb.dtsi b/dts/src/arm64/amlogic/meson-gxbb.dtsi index a60d3652be..f734faaf7b 100644 --- a/dts/src/arm64/amlogic/meson-gxbb.dtsi +++ b/dts/src/arm64/amlogic/meson-gxbb.dtsi @@ -381,10 +381,15 @@ }; emmc_pins: emmc { - mux { + mux-0 { groups = "emmc_nand_d07", - "emmc_cmd", - "emmc_clk"; + "emmc_cmd"; + function = "emmc"; + bias-pull-up; + }; + + mux-1 { + groups = "emmc_clk"; function = "emmc"; bias-disable; }; @@ -394,7 +399,7 @@ mux { groups = "emmc_ds"; function = "emmc"; - bias-disable; + bias-pull-down; }; }; @@ -436,13 +441,18 @@ }; sdcard_pins: sdcard { - mux { + mux-0 { groups = "sdcard_d0", "sdcard_d1", "sdcard_d2", "sdcard_d3", - "sdcard_cmd", - "sdcard_clk"; + "sdcard_cmd"; + function = "sdcard"; + bias-pull-up; + }; + + mux-1 { + groups = "sdcard_clk"; function = "sdcard"; bias-disable; }; @@ -457,13 +467,18 @@ }; sdio_pins: sdio { - mux { + mux-0 { groups = "sdio_d0", "sdio_d1", "sdio_d2", "sdio_d3", - "sdio_cmd", - "sdio_clk"; + "sdio_cmd"; + function = "sdio"; + bias-pull-up; + }; + + mux-1 { + groups = "sdio_clk"; function = "sdio"; bias-disable; }; diff --git a/dts/src/arm64/amlogic/meson-gxl-s805x-p241.dts b/dts/src/arm64/amlogic/meson-gxl-s805x-p241.dts index 70433e023f..3a1484e5b8 100644 --- a/dts/src/arm64/amlogic/meson-gxl-s805x-p241.dts +++ b/dts/src/arm64/amlogic/meson-gxl-s805x-p241.dts @@ -160,7 +160,7 @@ bus-width = <4>; cap-sd-highspeed; - max-frequency = <100000000>; + max-frequency = <50000000>; non-removable; disable-wp; diff --git a/dts/src/arm64/amlogic/meson-gxl-s905d-p230.dts b/dts/src/arm64/amlogic/meson-gxl-s905d-p230.dts index 0c8e8305b1..b08c4537f2 100644 --- a/dts/src/arm64/amlogic/meson-gxl-s905d-p230.dts +++ b/dts/src/arm64/amlogic/meson-gxl-s905d-p230.dts @@ -70,20 +70,21 @@ amlogic,tx-delay-ns = <2>; - /* External PHY reset is shared with internal PHY Led signals */ - snps,reset-gpio = <&gpio GPIOZ_14 0>; - snps,reset-delays-us = <0 10000 1000000>; - snps,reset-active-low; - /* External PHY is in RGMII */ phy-mode = "rgmii"; }; &external_mdio { external_phy: ethernet-phy@0 { - compatible = "ethernet-phy-id001c.c916", "ethernet-phy-ieee802.3-c22"; + /* Realtek RTL8211F (0x001cc916) */ reg = <0>; max-speed = <1000>; + + /* External PHY reset is shared with internal PHY Led signal */ + reset-assert-us = <10000>; + reset-deassert-us = <30000>; + reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>; + interrupt-parent = <&gpio_intc>; interrupts = <29 IRQ_TYPE_LEVEL_LOW>; eee-broken-1000t; diff --git a/dts/src/arm64/amlogic/meson-gxl-s905x-libretech-cc.dts b/dts/src/arm64/amlogic/meson-gxl-s905x-libretech-cc.dts index 255cede7b4..4b8ce738e2 100644 --- a/dts/src/arm64/amlogic/meson-gxl-s905x-libretech-cc.dts +++ b/dts/src/arm64/amlogic/meson-gxl-s905x-libretech-cc.dts @@ -115,11 +115,13 @@ regulator-max-microvolt = <1800000>; }; + /* This is provided by LDOs on the eMMC daugther card */ vddio_boot: regulator-vddio_boot { compatible = "regulator-fixed"; regulator-name = "VDDIO_BOOT"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_3v3>; }; }; @@ -235,7 +237,7 @@ bus-width = <4>; cap-sd-highspeed; - max-frequency = <100000000>; + max-frequency = <50000000>; disable-wp; cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; @@ -253,9 +255,9 @@ bus-width = <8>; cap-mmc-highspeed; - mmc-ddr-3_3v; - max-frequency = <50000000>; - non-removable; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + max-frequency = <200000000>; disable-wp; mmc-pwrseq = <&emmc_pwrseq>; diff --git a/dts/src/arm64/amlogic/meson-gxl-s905x-nexbox-a95x.dts b/dts/src/arm64/amlogic/meson-gxl-s905x-nexbox-a95x.dts index 9cbdb85fb5..26907ac829 100644 --- a/dts/src/arm64/amlogic/meson-gxl-s905x-nexbox-a95x.dts +++ b/dts/src/arm64/amlogic/meson-gxl-s905x-nexbox-a95x.dts @@ -180,7 +180,7 @@ bus-width = <4>; cap-sd-highspeed; - max-frequency = <100000000>; + max-frequency = <50000000>; disable-wp; cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm64/amlogic/meson-gxl-s905x-p212.dtsi b/dts/src/arm64/amlogic/meson-gxl-s905x-p212.dtsi index bc811a2faf..e3c16f5081 100644 --- a/dts/src/arm64/amlogic/meson-gxl-s905x-p212.dtsi +++ b/dts/src/arm64/amlogic/meson-gxl-s905x-p212.dtsi @@ -114,7 +114,7 @@ bus-width = <4>; cap-sd-highspeed; - max-frequency = <100000000>; + max-frequency = <50000000>; non-removable; disable-wp; @@ -134,7 +134,7 @@ bus-width = <4>; cap-sd-highspeed; - max-frequency = <100000000>; + max-frequency = <50000000>; disable-wp; cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm64/amlogic/meson-gxl.dtsi b/dts/src/arm64/amlogic/meson-gxl.dtsi index 3093ae421b..c959456bac 100644 --- a/dts/src/arm64/amlogic/meson-gxl.dtsi +++ b/dts/src/arm64/amlogic/meson-gxl.dtsi @@ -326,10 +326,15 @@ }; emmc_pins: emmc { - mux { + mux-0 { groups = "emmc_nand_d07", - "emmc_cmd", - "emmc_clk"; + "emmc_cmd"; + function = "emmc"; + bias-pull-up; + }; + + mux-1 { + groups = "emmc_clk"; function = "emmc"; bias-disable; }; @@ -339,7 +344,7 @@ mux { groups = "emmc_ds"; function = "emmc"; - bias-disable; + bias-pull-down; }; }; @@ -381,13 +386,18 @@ }; sdcard_pins: sdcard { - mux { + mux-0 { groups = "sdcard_d0", "sdcard_d1", "sdcard_d2", "sdcard_d3", - "sdcard_cmd", - "sdcard_clk"; + "sdcard_cmd"; + function = "sdcard"; + bias-pull-up; + }; + + mux-1 { + groups = "sdcard_clk"; function = "sdcard"; bias-disable; }; @@ -402,13 +412,18 @@ }; sdio_pins: sdio { - mux { + mux-0 { groups = "sdio_d0", "sdio_d1", "sdio_d2", "sdio_d3", - "sdio_cmd", - "sdio_clk"; + "sdio_cmd"; + function = "sdio"; + bias-pull-up; + }; + + mux-1 { + groups = "sdio_clk"; function = "sdio"; bias-disable; }; diff --git a/dts/src/arm64/amlogic/meson-gxm-khadas-vim2.dts b/dts/src/arm64/amlogic/meson-gxm-khadas-vim2.dts index 3f086ed7de..989d33ac6e 100644 --- a/dts/src/arm64/amlogic/meson-gxm-khadas-vim2.dts +++ b/dts/src/arm64/amlogic/meson-gxm-khadas-vim2.dts @@ -18,7 +18,6 @@ aliases { serial0 = &uart_AO; - serial1 = &uart_A; serial2 = &uart_AO_B; }; @@ -63,11 +62,9 @@ gpio-keys-polled { compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; poll-interval = <100>; - button@0 { + power-button { label = "power"; linux,code = <KEY_POWER>; gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>; @@ -242,11 +239,6 @@ amlogic,tx-delay-ns = <2>; - /* External PHY reset is shared with internal PHY Led signals */ - snps,reset-gpio = <&gpio GPIOZ_14 0>; - snps,reset-delays-us = <0 10000 1000000>; - snps,reset-active-low; - /* External PHY is in RGMII */ phy-mode = "rgmii"; @@ -257,6 +249,11 @@ external_phy: ethernet-phy@0 { /* Realtek RTL8211F (0x001cc916) */ reg = <0>; + + reset-assert-us = <10000>; + reset-deassert-us = <30000>; + reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>; + interrupt-parent = <&gpio_intc>; /* MAC_INTR on GPIOZ_15 */ interrupts = <25 IRQ_TYPE_LEVEL_LOW>; @@ -324,12 +321,13 @@ &sd_emmc_a { status = "okay"; pinctrl-0 = <&sdio_pins>; - pinctrl-names = "default"; + pinctrl-1 = <&sdio_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; #address-cells = <1>; #size-cells = <0>; bus-width = <4>; - max-frequency = <100000000>; + max-frequency = <50000000>; non-removable; disable-wp; @@ -349,11 +347,12 @@ &sd_emmc_b { status = "okay"; pinctrl-0 = <&sdcard_pins>; - pinctrl-names = "default"; + pinctrl-1 = <&sdcard_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; bus-width = <4>; cap-sd-highspeed; - max-frequency = <100000000>; + max-frequency = <50000000>; disable-wp; cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; @@ -366,17 +365,16 @@ &sd_emmc_c { status = "okay"; pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>; - pinctrl-names = "default"; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; bus-width = <8>; - cap-sd-highspeed; cap-mmc-highspeed; max-frequency = <200000000>; non-removable; disable-wp; mmc-ddr-1_8v; mmc-hs200-1_8v; - mmc-hs400-1_8v; mmc-pwrseq = <&emmc_pwrseq>; vmmc-supply = <&vcc_3v3>; @@ -404,8 +402,14 @@ /* This one is connected to the Bluetooth module */ &uart_A { status = "okay"; - pinctrl-0 = <&uart_a_pins>; + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; pinctrl-names = "default"; + uart-has-rtscts; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; + }; }; /* This is brought out on the Linux_RX (18) and Linux_TX (19) pins: */ diff --git a/dts/src/arm64/amlogic/meson-gxm-nexbox-a1.dts b/dts/src/arm64/amlogic/meson-gxm-nexbox-a1.dts index 25f3b6b140..c2bd4dbbf3 100644 --- a/dts/src/arm64/amlogic/meson-gxm-nexbox-a1.dts +++ b/dts/src/arm64/amlogic/meson-gxm-nexbox-a1.dts @@ -101,19 +101,19 @@ amlogic,tx-delay-ns = <2>; - snps,reset-gpio = <&gpio GPIOZ_14 0>; - snps,reset-delays-us = <0 10000 1000000>; - snps,reset-active-low; - /* External PHY is in RGMII */ phy-mode = "rgmii"; }; &external_mdio { external_phy: ethernet-phy@0 { - compatible = "ethernet-phy-id001c.c916", "ethernet-phy-ieee802.3-c22"; + /* Realtek RTL8211F (0x001cc916) */ reg = <0>; max-speed = <1000>; + + reset-assert-us = <10000>; + reset-deassert-us = <30000>; + reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>; }; }; @@ -144,7 +144,7 @@ bus-width = <4>; cap-sd-highspeed; - max-frequency = <100000000>; + max-frequency = <50000000>; disable-wp; cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm64/amlogic/meson-gxm-q200.dts b/dts/src/arm64/amlogic/meson-gxm-q200.dts index 73d656e4aa..ea45ae0c71 100644 --- a/dts/src/arm64/amlogic/meson-gxm-q200.dts +++ b/dts/src/arm64/amlogic/meson-gxm-q200.dts @@ -52,20 +52,21 @@ amlogic,tx-delay-ns = <2>; - /* External PHY reset is shared with internal PHY Led signals */ - snps,reset-gpio = <&gpio GPIOZ_14 0>; - snps,reset-delays-us = <0 10000 1000000>; - snps,reset-active-low; - /* External PHY is in RGMII */ phy-mode = "rgmii"; }; &external_mdio { external_phy: ethernet-phy@0 { - compatible = "ethernet-phy-id001c.c916", "ethernet-phy-ieee802.3-c22"; + /* Realtek RTL8211F (0x001cc916) */ reg = <0>; max-speed = <1000>; + + /* External PHY reset is shared with internal PHY Led signal */ + reset-assert-us = <10000>; + reset-deassert-us = <30000>; + reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>; + interrupt-parent = <&gpio_intc>; /* MAC_INTR on GPIOZ_15 */ interrupts = <25 IRQ_TYPE_LEVEL_LOW>; diff --git a/dts/src/arm64/amlogic/meson-gxm-rbox-pro.dts b/dts/src/arm64/amlogic/meson-gxm-rbox-pro.dts index 7fa20a8ede..5cd4d35006 100644 --- a/dts/src/arm64/amlogic/meson-gxm-rbox-pro.dts +++ b/dts/src/arm64/amlogic/meson-gxm-rbox-pro.dts @@ -101,10 +101,6 @@ /* Select external PHY by default */ phy-handle = <&external_phy>; - snps,reset-gpio = <&gpio GPIOZ_14 0>; - snps,reset-delays-us = <0 10000 1000000>; - snps,reset-active-low; - amlogic,tx-delay-ns = <2>; /* External PHY is in RGMII */ @@ -113,9 +109,13 @@ &external_mdio { external_phy: ethernet-phy@0 { - compatible = "ethernet-phy-id001c.c916", "ethernet-phy-ieee802.3-c22"; + /* Realtek RTL8211F (0x001cc916) */ reg = <0>; max-speed = <1000>; + + reset-assert-us = <10000>; + reset-deassert-us = <30000>; + reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>; }; }; @@ -143,7 +143,7 @@ bus-width = <4>; cap-sd-highspeed; - max-frequency = <100000000>; + max-frequency = <50000000>; non-removable; disable-wp; @@ -167,7 +167,7 @@ bus-width = <4>; cap-sd-highspeed; - max-frequency = <100000000>; + max-frequency = <50000000>; disable-wp; cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm64/arm/juno-base.dtsi b/dts/src/arm64/arm/juno-base.dtsi index 7446e0dc15..26a039a028 100644 --- a/dts/src/arm64/arm/juno-base.dtsi +++ b/dts/src/arm64/arm/juno-base.dtsi @@ -150,7 +150,7 @@ /* main funnel on Juno r0, cssys0 funnel on Juno r1/r2 as per TRM*/ main_funnel: funnel@20040000 { - compatible = "arm,coresight-funnel", "arm,primecell"; + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0 0x20040000 0 0x1000>; clocks = <&soc_smc50mhz>; @@ -281,7 +281,7 @@ }; funnel@220c0000 { /* cluster0 funnel */ - compatible = "arm,coresight-funnel", "arm,primecell"; + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0 0x220c0000 0 0x1000>; clocks = <&soc_smc50mhz>; @@ -366,7 +366,7 @@ }; funnel@230c0000 { /* cluster1 funnel */ - compatible = "arm,coresight-funnel", "arm,primecell"; + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0 0x230c0000 0 0x1000>; clocks = <&soc_smc50mhz>; diff --git a/dts/src/arm64/arm/juno-cs-r1r2.dtsi b/dts/src/arm64/arm/juno-cs-r1r2.dtsi index cf285152de..eda3d9e18a 100644 --- a/dts/src/arm64/arm/juno-cs-r1r2.dtsi +++ b/dts/src/arm64/arm/juno-cs-r1r2.dtsi @@ -1,7 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 / { funnel@20130000 { /* cssys1 */ - compatible = "arm,coresight-funnel", "arm,primecell"; + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0 0x20130000 0 0x1000>; clocks = <&soc_smc50mhz>; @@ -47,7 +47,7 @@ }; funnel@20150000 { /* cssys2 */ - compatible = "arm,coresight-funnel", "arm,primecell"; + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0 0x20150000 0 0x1000>; clocks = <&soc_smc50mhz>; diff --git a/dts/src/arm64/arm/juno-motherboard.dtsi b/dts/src/arm64/arm/juno-motherboard.dtsi index 1792b074e9..9f60dacb4f 100644 --- a/dts/src/arm64/arm/juno-motherboard.dtsi +++ b/dts/src/arm64/arm/juno-motherboard.dtsi @@ -106,7 +106,6 @@ flash@0,00000000 { /* 2 * 32MiB NOR Flash memory mounted on CS0 */ compatible = "arm,vexpress-flash", "cfi-flash"; - linux,part-probe = "afs"; reg = <0 0x00000000 0x04000000>; bank-width = <4>; /* @@ -116,6 +115,9 @@ * flash hardware access is disabled by default. */ status = "disabled"; + partitions { + compatible = "arm,arm-firmware-suite"; + }; }; ethernet@2,00000000 { diff --git a/dts/src/arm64/arm/vexpress-v2m-rs1.dtsi b/dts/src/arm64/arm/vexpress-v2m-rs1.dtsi index d3963e9eaf..d6a1fc2692 100644 --- a/dts/src/arm64/arm/vexpress-v2m-rs1.dtsi +++ b/dts/src/arm64/arm/vexpress-v2m-rs1.dtsi @@ -30,11 +30,14 @@ #interrupt-cells = <1>; ranges; - flash@0,00000000 { + nor_flash: flash@0,00000000 { compatible = "arm,vexpress-flash", "cfi-flash"; reg = <0 0x00000000 0x04000000>, <4 0x00000000 0x04000000>; bank-width = <4>; + partitions { + compatible = "arm,arm-firmware-suite"; + }; }; psram@1,00000000 { diff --git a/dts/src/arm64/broadcom/stingray/stingray-usb.dtsi b/dts/src/arm64/broadcom/stingray/stingray-usb.dtsi new file mode 100644 index 0000000000..55259f973b --- /dev/null +++ b/dts/src/arm64/broadcom/stingray/stingray-usb.dtsi @@ -0,0 +1,72 @@ +// SPDX-License-Identifier: (GPL-2.0 or BSD-3-Clause) +/* + *Copyright(c) 2018 Broadcom + */ + usb { + compatible = "simple-bus"; + dma-ranges; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x68500000 0x00400000>; + + usbphy0: usb-phy@0 { + compatible = "brcm,sr-usb-combo-phy"; + reg = <0x00000000 0x100>; + #phy-cells = <1>; + status = "disabled"; + }; + + xhci0: usb@1000 { + compatible = "generic-xhci"; + reg = <0x00001000 0x1000>; + interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>; + phys = <&usbphy0 1>, <&usbphy0 0>; + phy-names = "phy0", "phy1"; + dma-coherent; + status = "disabled"; + }; + + bdc0: usb@2000 { + compatible = "brcm,bdc-v0.16"; + reg = <0x00002000 0x1000>; + interrupts = <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>; + phys = <&usbphy0 0>, <&usbphy0 1>; + phy-names = "phy0", "phy1"; + dma-coherent; + status = "disabled"; + }; + + usbphy1: usb-phy@10000 { + compatible = "brcm,sr-usb-combo-phy"; + reg = <0x00010000 0x100>; + #phy-cells = <1>; + status = "disabled"; + }; + + usbphy2: usb-phy@20000 { + compatible = "brcm,sr-usb-hs-phy"; + reg = <0x00020000 0x100>; + #phy-cells = <0>; + status = "disabled"; + }; + + xhci1: usb@11000 { + compatible = "generic-xhci"; + reg = <0x00011000 0x1000>; + interrupts = <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>; + phys = <&usbphy1 1>, <&usbphy2>, <&usbphy1 0>; + phy-names = "phy0", "phy1", "phy2"; + dma-coherent; + status = "disabled"; + }; + + bdc1: usb@21000 { + compatible = "brcm,bdc-v0.16"; + reg = <0x00021000 0x1000>; + interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>; + phys = <&usbphy2>; + phy-names = "phy0"; + dma-coherent; + status = "disabled"; + }; + }; diff --git a/dts/src/arm64/broadcom/stingray/stingray.dtsi b/dts/src/arm64/broadcom/stingray/stingray.dtsi index 35c4670c00..71e2e34400 100644 --- a/dts/src/arm64/broadcom/stingray/stingray.dtsi +++ b/dts/src/arm64/broadcom/stingray/stingray.dtsi @@ -287,6 +287,7 @@ #include "stingray-fs4.dtsi" #include "stingray-sata.dtsi" #include "stingray-pcie.dtsi" + #include "stingray-usb.dtsi" hsls { compatible = "simple-bus"; @@ -612,4 +613,111 @@ status = "disabled"; }; }; + + tmons { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x8f100000 0x100>; + + tmon: tmon@0 { + compatible = "brcm,sr-thermal"; + reg = <0x0 0x40>; + brcm,tmon-mask = <0x3f>; + #thermal-sensor-cells = <1>; + }; + }; + + thermal-zones { + ihost0_thermal: ihost0-thermal { + polling-delay-passive = <0>; + polling-delay = <1000>; + thermal-sensors = <&tmon 0>; + trips { + cpu-crit { + temperature = <105000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + ihost1_thermal: ihost1-thermal { + polling-delay-passive = <0>; + polling-delay = <1000>; + thermal-sensors = <&tmon 1>; + trips { + cpu-crit { + temperature = <105000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + ihost2_thermal: ihost2-thermal { + polling-delay-passive = <0>; + polling-delay = <1000>; + thermal-sensors = <&tmon 2>; + trips { + cpu-crit { + temperature = <105000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + ihost3_thermal: ihost3-thermal { + polling-delay-passive = <0>; + polling-delay = <1000>; + thermal-sensors = <&tmon 3>; + trips { + cpu-crit { + temperature = <105000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + crmu_thermal: crmu-thermal { + polling-delay-passive = <0>; + polling-delay = <1000>; + thermal-sensors = <&tmon 4>; + trips { + cpu-crit { + temperature = <105000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + nitro_thermal: nitro-thermal { + polling-delay-passive = <0>; + polling-delay = <1000>; + thermal-sensors = <&tmon 5>; + trips { + cpu-crit { + temperature = <105000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; + + nic-hsls { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x0 0x7fffffff>; + + nic_i2c0: i2c@60826100 { + compatible = "brcm,iproc-nic-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x60826100 0x100>, + <0x60e00408 0x1000>; + brcm,ape-hsls-addr-mask = <0x03400000>; + clock-frequency = <100000>; + status = "disabled"; + }; + }; }; diff --git a/dts/src/arm64/exynos/exynos5433-tm2-common.dtsi b/dts/src/arm64/exynos/exynos5433-tm2-common.dtsi index d2de16645e..6f90b0e62c 100644 --- a/dts/src/arm64/exynos/exynos5433-tm2-common.dtsi +++ b/dts/src/arm64/exynos/exynos5433-tm2-common.dtsi @@ -350,6 +350,11 @@ pinctrl-0 = <&te_irq>; }; +&gpu { + mali-supply = <&buck6_reg>; + status = "okay"; +}; + &hdmi { hpd-gpios = <&gpa3 0 GPIO_ACTIVE_HIGH>; status = "okay"; diff --git a/dts/src/arm64/exynos/exynos5433.dtsi b/dts/src/arm64/exynos/exynos5433.dtsi index d29d13f469..a76f620f7f 100644 --- a/dts/src/arm64/exynos/exynos5433.dtsi +++ b/dts/src/arm64/exynos/exynos5433.dtsi @@ -249,6 +249,57 @@ }; }; + gpu: gpu@14ac0000 { + compatible = "samsung,exynos5433-mali", "arm,mali-t760"; + reg = <0x14ac0000 0x5000>; + interrupts = <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "job", "mmu", "gpu"; + clocks = <&cmu_g3d CLK_ACLK_G3D>; + clock-names = "core"; + power-domains = <&pd_g3d>; + operating-points-v2 = <&gpu_opp_table>; + status = "disabled"; + + gpu_opp_table: opp_table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + opp-microvolt = <1000000>; + }; + opp-267000000 { + opp-hz = /bits/ 64 <267000000>; + opp-microvolt = <1000000>; + }; + opp-350000000 { + opp-hz = /bits/ 64 <350000000>; + opp-microvolt = <1025000>; + }; + opp-420000000 { + opp-hz = /bits/ 64 <420000000>; + opp-microvolt = <1025000>; + }; + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <1075000>; + }; + opp-550000000 { + opp-hz = /bits/ 64 <550000000>; + opp-microvolt = <1125000>; + }; + opp-600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <1150000>; + }; + opp-700000000 { + opp-hz = /bits/ 64 <700000000>; + opp-microvolt = <1150000>; + }; + }; + }; + psci { compatible = "arm,psci"; method = "smc"; diff --git a/dts/src/arm64/exynos/exynos7-espresso.dts b/dts/src/arm64/exynos/exynos7-espresso.dts index 00dd89b92b..080e0f56e1 100644 --- a/dts/src/arm64/exynos/exynos7-espresso.dts +++ b/dts/src/arm64/exynos/exynos7-espresso.dts @@ -59,6 +59,11 @@ clock-frequency = <24000000>; }; +&gpu { + mali-supply = <&buck6_reg>; + status = "okay"; +}; + &serial_2 { status = "okay"; }; diff --git a/dts/src/arm64/exynos/exynos7.dtsi b/dts/src/arm64/exynos/exynos7.dtsi index 077d234789..bcb9d8cee2 100644 --- a/dts/src/arm64/exynos/exynos7.dtsi +++ b/dts/src/arm64/exynos/exynos7.dtsi @@ -78,6 +78,17 @@ }; }; + gpu: gpu@14ac0000 { + compatible = "samsung,exynos5433-mali", "arm,mali-t760"; + reg = <0x14ac0000 0x5000>; + interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "job", "mmu", "gpu"; + status = "disabled"; + /* TODO: operating points for DVFS, cooling device */ + }; + psci { compatible = "arm,psci-0.2"; method = "smc"; diff --git a/dts/src/arm64/freescale/fsl-ls1028a-qds.dts b/dts/src/arm64/freescale/fsl-ls1028a-qds.dts index b359068d96..de6ef39f31 100644 --- a/dts/src/arm64/freescale/fsl-ls1028a-qds.dts +++ b/dts/src/arm64/freescale/fsl-ls1028a-qds.dts @@ -17,6 +17,7 @@ compatible = "fsl,ls1028a-qds", "fsl,ls1028a"; aliases { + crypto = &crypto; gpio0 = &gpio1; gpio1 = &gpio2; gpio2 = &gpio3; @@ -47,6 +48,15 @@ regulator-always-on; }; + sb_3v3: regulator-sb3v3 { + compatible = "regulator-fixed"; + regulator-name = "3v3_vbus"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + sound { compatible = "simple-audio-card"; simple-audio-card,format = "i2s"; @@ -117,6 +127,12 @@ #size-cells = <0>; reg = <0x3>; + temperature-sensor@4c { + compatible = "nxp,sa56004"; + reg = <0x4c>; + vcc-supply = <&sb_3v3>; + }; + rtc@51 { compatible = "nxp,pcf2129"; reg = <0x51>; @@ -153,3 +169,7 @@ &sai1 { status = "okay"; }; + +&sata { + status = "okay"; +}; diff --git a/dts/src/arm64/freescale/fsl-ls1028a-rdb.dts b/dts/src/arm64/freescale/fsl-ls1028a-rdb.dts index f9c272fb07..9fb911317e 100644 --- a/dts/src/arm64/freescale/fsl-ls1028a-rdb.dts +++ b/dts/src/arm64/freescale/fsl-ls1028a-rdb.dts @@ -16,6 +16,7 @@ compatible = "fsl,ls1028a-rdb", "fsl,ls1028a"; aliases { + crypto = &crypto; serial0 = &duart0; serial1 = &duart1; }; @@ -43,6 +44,15 @@ regulator-always-on; }; + sb_3v3: regulator-sb3v3 { + compatible = "regulator-fixed"; + regulator-name = "3v3_vbus"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + sound { compatible = "simple-audio-card"; simple-audio-card,format = "i2s"; @@ -115,6 +125,12 @@ #size-cells = <0>; reg = <0x3>; + temperature-sensor@4c { + compatible = "nxp,sa56004"; + reg = <0x4c>; + vcc-supply = <&sb_3v3>; + }; + rtc@51 { compatible = "nxp,pcf2129"; reg = <0x51>; @@ -151,3 +167,7 @@ &sai4 { status = "okay"; }; + +&sata { + status = "okay"; +}; diff --git a/dts/src/arm64/freescale/fsl-ls1028a.dtsi b/dts/src/arm64/freescale/fsl-ls1028a.dtsi index b04581249f..7975519b4f 100644 --- a/dts/src/arm64/freescale/fsl-ls1028a.dtsi +++ b/dts/src/arm64/freescale/fsl-ls1028a.dtsi @@ -28,7 +28,7 @@ enable-method = "psci"; clocks = <&clockgen 1 0>; next-level-cache = <&l2>; - cpu-idle-states = <&CPU_PH20>; + cpu-idle-states = <&CPU_PW20>; }; cpu1: cpu@1 { @@ -38,7 +38,7 @@ enable-method = "psci"; clocks = <&clockgen 1 0>; next-level-cache = <&l2>; - cpu-idle-states = <&CPU_PH20>; + cpu-idle-states = <&CPU_PW20>; }; l2: l2-cache { @@ -53,13 +53,13 @@ */ entry-method = "arm,psci"; - CPU_PH20: cpu-ph20 { - compatible = "arm,idle-state"; - idle-state-name = "PH20"; - arm,psci-suspend-param = <0x00010000>; - entry-latency-us = <1000>; - exit-latency-us = <1000>; - min-residency-us = <3000>; + CPU_PW20: cpu-pw20 { + compatible = "arm,idle-state"; + idle-state-name = "PW20"; + arm,psci-suspend-param = <0x0>; + entry-latency-us = <2000>; + exit-latency-us = <2000>; + min-residency-us = <6000>; }; }; @@ -70,6 +70,27 @@ clock-output-names = "sysclk"; }; + dpclk: clock-dp { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <27000000>; + clock-output-names= "dpclk"; + }; + + aclk: clock-axi { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <650000000>; + clock-output-names= "aclk"; + }; + + pclk: clock-apb { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <650000000>; + clock-output-names= "pclk"; + }; + reboot { compatible ="syscon-reboot"; regmap = <&dcfg>; @@ -285,13 +306,24 @@ #interrupt-cells = <2>; }; - wdog0: watchdog@23c0000 { - compatible = "fsl,ls1028a-wdt", "fsl,imx21-wdt"; - reg = <0x0 0x23c0000 0x0 0x10000>; - interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 1>; - big-endian; - status = "disabled"; + usb0: usb@3100000 { + compatible = "fsl,ls1028a-dwc3", "snps,dwc3"; + reg = <0x0 0x3100000 0x0 0x10000>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; + dr_mode = "host"; + snps,dis_rxdet_inp3_quirk; + snps,quirk-frame-length-adjustment = <0x20>; + snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; + }; + + usb1: usb@3110000 { + compatible = "fsl,ls1028a-dwc3", "snps,dwc3"; + reg = <0x0 0x3110000 0x0 0x10000>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; + dr_mode = "host"; + snps,dis_rxdet_inp3_quirk; + snps,quirk-frame-length-adjustment = <0x20>; + snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; }; sata: sata@3200000 { @@ -356,6 +388,79 @@ <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>; }; + crypto: crypto@8000000 { + compatible = "fsl,sec-v5.0", "fsl,sec-v4.0"; + fsl,sec-era = <10>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x00 0x8000000 0x100000>; + reg = <0x00 0x8000000 0x0 0x100000>; + interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; + dma-coherent; + + sec_jr0: jr@10000 { + compatible = "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x10000 0x10000>; + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; + }; + + sec_jr1: jr@20000 { + compatible = "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x20000 0x10000>; + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; + }; + + sec_jr2: jr@30000 { + compatible = "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x30000 0x10000>; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>; + }; + + sec_jr3: jr@40000 { + compatible = "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x40000 0x10000>; + interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + qdma: dma-controller@8380000 { + compatible = "fsl,ls1028a-qdma", "fsl,ls1021a-qdma"; + reg = <0x0 0x8380000 0x0 0x1000>, /* Controller regs */ + <0x0 0x8390000 0x0 0x10000>, /* Status regs */ + <0x0 0x83a0000 0x0 0x40000>; /* Block regs */ + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "qdma-error", "qdma-queue0", + "qdma-queue1", "qdma-queue2", "qdma-queue3"; + dma-channels = <8>; + block-number = <1>; + block-offset = <0x10000>; + fsl,dma-queues = <2>; + status-sizes = <64>; + queue-sizes = <64 64>; + }; + + cluster1_core0_watchdog: watchdog@c000000 { + compatible = "arm,sp805", "arm,primecell"; + reg = <0x0 0xc000000 0x0 0x1000>; + clocks = <&clockgen 4 15>, <&clockgen 4 15>; + clock-names = "apb_pclk", "wdog_clk"; + }; + + cluster1_core1_watchdog: watchdog@c010000 { + compatible = "arm,sp805", "arm,primecell"; + reg = <0x0 0xc010000 0x0 0x1000>; + clocks = <&clockgen 4 15>, <&clockgen 4 15>; + clock-names = "apb_pclk", "wdog_clk"; + }; + sai1: audio-controller@f100000 { #sound-dai-cells = <0>; compatible = "fsl,vf610-sai"; @@ -431,6 +536,29 @@ compatible = "fsl,enetc"; reg = <0x000100 0 0 0 0>; }; + ethernet@0,4 { + compatible = "fsl,enetc-ptp"; + reg = <0x000400 0 0 0 0>; + clocks = <&clockgen 4 0>; + little-endian; + }; + }; + }; + + malidp0: display@f080000 { + compatible = "arm,mali-dp500"; + reg = <0x0 0xf080000 0x0 0x10000>; + interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>, + <0 223 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "DE", "SE"; + clocks = <&dpclk>, <&aclk>, <&aclk>, <&pclk>; + clock-names = "pxlclk", "mclk", "aclk", "pclk"; + arm,malidp-output-port-lines = /bits/ 8 <8 8 8>; + + port { + dp0_out: endpoint { + + }; }; }; }; diff --git a/dts/src/arm64/freescale/fsl-ls1088a.dtsi b/dts/src/arm64/freescale/fsl-ls1088a.dtsi index 661137ffa3..dacd8cf03a 100644 --- a/dts/src/arm64/freescale/fsl-ls1088a.dtsi +++ b/dts/src/arm64/freescale/fsl-ls1088a.dtsi @@ -609,6 +609,14 @@ <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>; }; + ptp-timer@8b95000 { + compatible = "fsl,dpaa2-ptp"; + reg = <0x0 0x8b95000 0x0 0x100>; + clocks = <&clockgen 4 0>; + little-endian; + fsl,extts-fifo; + }; + cluster1_core0_watchdog: wdt@c000000 { compatible = "arm,sp805-wdt", "arm,primecell"; reg = <0x0 0xc000000 0x0 0x1000>; diff --git a/dts/src/arm64/freescale/fsl-ls208xa.dtsi b/dts/src/arm64/freescale/fsl-ls208xa.dtsi index d7e78dcd15..3ace91945b 100644 --- a/dts/src/arm64/freescale/fsl-ls208xa.dtsi +++ b/dts/src/arm64/freescale/fsl-ls208xa.dtsi @@ -321,6 +321,14 @@ }; }; + ptp-timer@8b95000 { + compatible = "fsl,dpaa2-ptp"; + reg = <0x0 0x8b95000 0x0 0x100>; + clocks = <&clockgen 4 1>; + little-endian; + fsl,extts-fifo; + }; + fsl_mc: fsl-mc@80c000000 { compatible = "fsl,qoriq-mc"; reg = <0x00000008 0x0c000000 0 0x40>, /* MC portal base */ diff --git a/dts/src/arm64/freescale/fsl-lx2160a.dtsi b/dts/src/arm64/freescale/fsl-lx2160a.dtsi index 125a8cc2c5..e6fdba3945 100644 --- a/dts/src/arm64/freescale/fsl-lx2160a.dtsi +++ b/dts/src/arm64/freescale/fsl-lx2160a.dtsi @@ -848,6 +848,14 @@ dma-coherent; }; + ptp-timer@8b95000 { + compatible = "fsl,dpaa2-ptp"; + reg = <0x0 0x8b95000 0x0 0x100>; + clocks = <&clockgen 4 1>; + little-endian; + fsl,extts-fifo; + }; + fsl_mc: fsl-mc@80c000000 { compatible = "fsl,qoriq-mc"; reg = <0x00000008 0x0c000000 0 0x40>, diff --git a/dts/src/arm64/freescale/imx8mm-evk.dts b/dts/src/arm64/freescale/imx8mm-evk.dts index 2d5d89475b..ee7f2b2fc1 100644 --- a/dts/src/arm64/freescale/imx8mm-evk.dts +++ b/dts/src/arm64/freescale/imx8mm-evk.dts @@ -37,6 +37,41 @@ gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; enable-active-high; }; + + wm8524: audio-codec { + #sound-dai-cells = <0>; + compatible = "wlf,wm8524"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_wlf>; + wlf,mute-gpios = <&gpio5 21 GPIO_ACTIVE_LOW>; + }; + + sound-wm8524 { + compatible = "simple-audio-card"; + simple-audio-card,name = "wm8524-audio"; + simple-audio-card,format = "i2s"; + simple-audio-card,frame-master = <&cpudai>; + simple-audio-card,bitclock-master = <&cpudai>; + simple-audio-card,widgets = + "Line", "Left Line Out Jack", + "Line", "Right Line Out Jack"; + simple-audio-card,routing = + "Left Line Out Jack", "LINEVOUTL", + "Right Line Out Jack", "LINEVOUTR"; + + cpudai: simple-audio-card,cpu { + sound-dai = <&sai3>; + }; + + simple-audio-card,codec { + sound-dai = <&wm8524>; + clocks = <&clk IMX8MM_CLK_SAI3_ROOT>; + }; + }; +}; + +&A53_0 { + cpu-supply = <&buck2_reg>; }; &fec1 { @@ -61,6 +96,19 @@ }; }; +&sai3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai3>; + assigned-clocks = <&clk IMX8MM_CLK_SAI3>; + assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>; + assigned-clock-rates = <24576000>; + status = "okay"; +}; + +&snvs_pwrkey { + status = "okay"; +}; + &uart2 { /* console */ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; @@ -95,6 +143,120 @@ status = "okay"; }; +&i2c1 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + pmic@4b { + compatible = "rohm,bd71847"; + reg = <0x4b>; + pinctrl-0 = <&pinctrl_pmic>; + interrupt-parent = <&gpio1>; + interrupts = <3 GPIO_ACTIVE_LOW>; + rohm,reset-snvs-powered; + + regulators { + buck1_reg: BUCK1 { + regulator-name = "BUCK1"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <1250>; + }; + + buck2_reg: BUCK2 { + regulator-name = "BUCK2"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <1250>; + rohm,dvs-run-voltage = <1000000>; + rohm,dvs-idle-voltage = <900000>; + }; + + buck3_reg: BUCK3 { + // BUCK5 in datasheet + regulator-name = "BUCK3"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1350000>; + regulator-boot-on; + regulator-always-on; + }; + + buck4_reg: BUCK4 { + // BUCK6 in datasheet + regulator-name = "BUCK4"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + buck5_reg: BUCK5 { + // BUCK7 in datasheet + regulator-name = "BUCK5"; + regulator-min-microvolt = <1605000>; + regulator-max-microvolt = <1995000>; + regulator-boot-on; + regulator-always-on; + }; + + buck6_reg: BUCK6 { + // BUCK8 in datasheet + regulator-name = "BUCK6"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1_reg: LDO1 { + regulator-name = "LDO1"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo2_reg: LDO2 { + regulator-name = "LDO2"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo3_reg: LDO3 { + regulator-name = "LDO3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo4_reg: LDO4 { + regulator-name = "LDO4"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo6_reg: LDO6 { + regulator-name = "LDO6"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; +}; + &iomuxc { pinctrl-names = "default"; @@ -124,12 +286,40 @@ >; }; + pinctrl_gpio_wlf: gpiowlfgrp { + fsl,pins = < + MX8MM_IOMUXC_I2C4_SDA_GPIO5_IO21 0xd6 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3 + MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3 + >; + }; + + pinctrl_pmic: pmicirq { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x41 + >; + }; + pinctrl_reg_usdhc2_vmmc: regusdhc2vmmc { fsl,pins = < MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41 >; }; + pinctrl_sai3: sai3grp { + fsl,pins = < + MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0xd6 + MX8MM_IOMUXC_SAI3_TXC_SAI3_TX_BCLK 0xd6 + MX8MM_IOMUXC_SAI3_MCLK_SAI3_MCLK 0xd6 + MX8MM_IOMUXC_SAI3_TXD_SAI3_TX_DATA0 0xd6 + >; + }; + pinctrl_uart2: uart2grp { fsl,pins = < MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140 diff --git a/dts/src/arm64/freescale/imx8mm-pinfunc.h b/dts/src/arm64/freescale/imx8mm-pinfunc.h index e25f7fcd79..cffa899188 100644 --- a/dts/src/arm64/freescale/imx8mm-pinfunc.h +++ b/dts/src/arm64/freescale/imx8mm-pinfunc.h @@ -462,7 +462,7 @@ #define MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28 0x1CC 0x434 0x000 0x5 0x0 #define MX8MM_IOMUXC_SAI3_RXFS_TPSMP_HTRANS0 0x1CC 0x434 0x000 0x7 0x0 #define MX8MM_IOMUXC_SAI3_RXC_SAI3_RX_BCLK 0x1D0 0x438 0x000 0x0 0x0 -#define MX8MM_IOMUXC_SAI3_RXC_GPT1_CAPTURE2 0x1D0 0x438 0x000 0x1 0x0 +#define MX8MM_IOMUXC_SAI3_RXC_GPT1_CLK 0x1D0 0x438 0x000 0x1 0x0 #define MX8MM_IOMUXC_SAI3_RXC_SAI5_RX_BCLK 0x1D0 0x438 0x4D0 0x2 0x2 #define MX8MM_IOMUXC_SAI3_RXC_GPIO4_IO29 0x1D0 0x438 0x000 0x5 0x0 #define MX8MM_IOMUXC_SAI3_RXC_TPSMP_HTRANS1 0x1D0 0x438 0x000 0x7 0x0 @@ -472,7 +472,7 @@ #define MX8MM_IOMUXC_SAI3_RXD_GPIO4_IO30 0x1D4 0x43C 0x000 0x5 0x0 #define MX8MM_IOMUXC_SAI3_RXD_TPSMP_HDATA0 0x1D4 0x43C 0x000 0x7 0x0 #define MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0x1D8 0x440 0x000 0x0 0x0 -#define MX8MM_IOMUXC_SAI3_TXFS_GPT1_CLK 0x1D8 0x440 0x000 0x1 0x0 +#define MX8MM_IOMUXC_SAI3_TXFS_GPT1_CAPTURE2 0x1D8 0x440 0x000 0x1 0x0 #define MX8MM_IOMUXC_SAI3_TXFS_SAI5_RX_DATA1 0x1D8 0x440 0x4D8 0x2 0x2 #define MX8MM_IOMUXC_SAI3_TXFS_GPIO4_IO31 0x1D8 0x440 0x000 0x5 0x0 #define MX8MM_IOMUXC_SAI3_TXFS_TPSMP_HDATA1 0x1D8 0x440 0x000 0x7 0x0 diff --git a/dts/src/arm64/freescale/imx8mm.dtsi b/dts/src/arm64/freescale/imx8mm.dtsi index 6b407a94c0..232a741275 100644 --- a/dts/src/arm64/freescale/imx8mm.dtsi +++ b/dts/src/arm64/freescale/imx8mm.dtsi @@ -53,6 +53,8 @@ enable-method = "psci"; next-level-cache = <&A53_L2>; operating-points-v2 = <&a53_opp_table>; + nvmem-cells = <&cpu_speed_grade>; + nvmem-cell-names = "speed_grade"; }; A53_1: cpu@1 { @@ -100,14 +102,23 @@ opp-1200000000 { opp-hz = /bits/ 64 <1200000000>; opp-microvolt = <850000>; + opp-supported-hw = <0xe>, <0x7>; clock-latency-ns = <150000>; }; opp-1600000000 { opp-hz = /bits/ 64 <1600000000>; opp-microvolt = <900000>; + opp-supported-hw = <0xc>, <0x7>; + clock-latency-ns = <150000>; + }; + + opp-1800000000 { + opp-hz = /bits/ 64 <1800000000>; + opp-microvolt = <1000000>; + /* Consumer only but rely on speed grading */ + opp-supported-hw = <0x8>, <0x7>; clock-latency-ns = <150000>; - opp-suspend; }; }; @@ -158,15 +169,6 @@ clock-output-names = "clk_ext4"; }; - gic: interrupt-controller@38800000 { - compatible = "arm,gic-v3"; - reg = <0x0 0x38800000 0 0x10000>, /* GIC Dist */ - <0x0 0x38880000 0 0xC0000>; /* GICR (RD_base + SGI_base) */ - #interrupt-cells = <3>; - interrupt-controller; - interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; - }; - psci { compatible = "arm,psci-1.0"; method = "smc"; @@ -189,7 +191,23 @@ arm,no-tick-in-suspend; }; - soc { + usbphynop1: usbphynop1 { + compatible = "usb-nop-xceiv"; + clocks = <&clk IMX8MM_CLK_USB_PHY_REF>; + assigned-clocks = <&clk IMX8MM_CLK_USB_PHY_REF>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_100M>; + clock-names = "main_clk"; + }; + + usbphynop2: usbphynop2 { + compatible = "usb-nop-xceiv"; + clocks = <&clk IMX8MM_CLK_USB_PHY_REF>; + assigned-clocks = <&clk IMX8MM_CLK_USB_PHY_REF>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_100M>; + clock-names = "main_clk"; + }; + + soc@0 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -199,13 +217,80 @@ compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; - ranges; + ranges = <0x30000000 0x30000000 0x400000>; + + sai1: sai@30010000 { + compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; + reg = <0x30010000 0x10000>; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_SAI1_IPG>, + <&clk IMX8MM_CLK_SAI1_ROOT>, + <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dmas = <&sdma2 0 2 0>, <&sdma2 1 2 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + sai2: sai@30020000 { + compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; + reg = <0x30020000 0x10000>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_SAI2_IPG>, + <&clk IMX8MM_CLK_SAI2_ROOT>, + <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dmas = <&sdma2 2 2 0>, <&sdma2 3 2 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + sai3: sai@30030000 { + #sound-dai-cells = <0>; + compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; + reg = <0x30030000 0x10000>; + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_SAI3_IPG>, + <&clk IMX8MM_CLK_SAI3_ROOT>, + <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dmas = <&sdma2 4 2 0>, <&sdma2 5 2 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + sai5: sai@30050000 { + compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; + reg = <0x30050000 0x10000>; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_SAI5_IPG>, + <&clk IMX8MM_CLK_SAI5_ROOT>, + <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dmas = <&sdma2 8 2 0>, <&sdma2 9 2 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + sai6: sai@30060000 { + compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; + reg = <0x30060000 0x10000>; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_SAI6_IPG>, + <&clk IMX8MM_CLK_SAI6_ROOT>, + <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dmas = <&sdma2 10 2 0>, <&sdma2 11 2 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; gpio1: gpio@30200000 { compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio"; reg = <0x30200000 0x10000>; interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_GPIO1_ROOT>; gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -217,6 +302,7 @@ reg = <0x30210000 0x10000>; interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_GPIO2_ROOT>; gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -228,6 +314,7 @@ reg = <0x30220000 0x10000>; interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_GPIO3_ROOT>; gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -239,6 +326,7 @@ reg = <0x30230000 0x10000>; interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_GPIO4_ROOT>; gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -250,6 +338,7 @@ reg = <0x30240000 0x10000>; interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_GPIO5_ROOT>; gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -319,6 +408,10 @@ /* For nvmem subnodes */ #address-cells = <1>; #size-cells = <1>; + + cpu_speed_grade: speed-grade@10 { + reg = <0x10 4>; + }; }; anatop: anatop@30360000 { @@ -336,6 +429,8 @@ offset = <0x34>; interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_SNVS_ROOT>; + clock-names = "snvs-rtc"; }; snvs_pwrkey: snvs-powerkey { @@ -344,6 +439,7 @@ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; linux,keycode = <KEY_POWER>; wakeup-source; + status = "disabled"; }; }; @@ -369,7 +465,7 @@ compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; - ranges; + ranges = <0x30400000 0x30400000 0x400000>; pwm1: pwm@30660000 { compatible = "fsl,imx8mm-pwm", "fsl,imx27-pwm"; @@ -420,7 +516,7 @@ compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; - ranges; + ranges = <0x30800000 0x30800000 0x400000>; ecspi1: spi@30820000 { compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi"; @@ -639,7 +735,7 @@ compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; - ranges; + ranges = <0x32c00000 0x32c00000 0x400000>; usbotg1: usb@32e40000 { compatible = "fsl,imx8mm-usb", "fsl,imx7d-usb"; @@ -656,14 +752,6 @@ status = "disabled"; }; - usbphynop1: usbphynop1 { - compatible = "usb-nop-xceiv"; - clocks = <&clk IMX8MM_CLK_USB_PHY_REF>; - assigned-clocks = <&clk IMX8MM_CLK_USB_PHY_REF>; - assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_100M>; - clock-names = "main_clk"; - }; - usbmisc1: usbmisc@32e40200 { compatible = "fsl,imx8mm-usbmisc", "fsl,imx7d-usbmisc"; #index-cells = <1>; @@ -685,14 +773,6 @@ status = "disabled"; }; - usbphynop2: usbphynop2 { - compatible = "usb-nop-xceiv"; - clocks = <&clk IMX8MM_CLK_USB_PHY_REF>; - assigned-clocks = <&clk IMX8MM_CLK_USB_PHY_REF>; - assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_100M>; - clock-names = "main_clk"; - }; - usbmisc2: usbmisc@32e50200 { compatible = "fsl,imx8mm-usbmisc", "fsl,imx7d-usbmisc"; #index-cells = <1>; @@ -729,5 +809,14 @@ dma-names = "rx-tx"; status = "disabled"; }; + + gic: interrupt-controller@38800000 { + compatible = "arm,gic-v3"; + reg = <0x38800000 0x10000>, /* GIC Dist */ + <0x38880000 0xc0000>; /* GICR (RD_base + SGI_base) */ + #interrupt-cells = <3>; + interrupt-controller; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + }; }; }; diff --git a/dts/src/arm64/freescale/imx8mn-pinfunc.h b/dts/src/arm64/freescale/imx8mn-pinfunc.h new file mode 100644 index 0000000000..faf1e69e74 --- /dev/null +++ b/dts/src/arm64/freescale/imx8mn-pinfunc.h @@ -0,0 +1,646 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2018-2019 NXP + */ + +#ifndef __DTS_IMX8MN_PINFUNC_H +#define __DTS_IMX8MN_PINFUNC_H + +/* + * The pin function ID is a tuple of + * <mux_reg conf_reg input_reg mux_mode input_val> + */ + +#define MX8MN_IOMUXC_BOOT_MODE2_CCMSRCGPCMIX_BOOT_MODE2 0x020 0x25C 0x000 0x0 0x0 +#define MX8MN_IOMUXC_BOOT_MODE2_I2C1_SCL 0x020 0x25C 0x55C 0x1 0x3 +#define MX8MN_IOMUXC_BOOT_MODE3_CCMSRCGPCMIX_BOOT_MODE3 0x024 0x260 0x000 0x0 0x0 +#define MX8MN_IOMUXC_BOOT_MODE3_I2C1_SDA 0x024 0x260 0x56C 0x1 0x3 +#define MX8MN_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x028 0x290 0x000 0x0 0x0 +#define MX8MN_IOMUXC_GPIO1_IO00_CCMSRCGPCMIX_ENET_PHY_REF_CLK_ROOT 0x028 0x290 0x000 0x1 0x0 +#define MX8MN_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K 0x028 0x290 0x000 0x5 0x0 +#define MX8MN_IOMUXC_GPIO1_IO00_CCMSRCGPCMIX_EXT_CLK1 0x028 0x290 0x000 0x6 0x0 +#define MX8MN_IOMUXC_GPIO1_IO01_GPIO1_IO1 0x02C 0x294 0x000 0x0 0x0 +#define MX8MN_IOMUXC_GPIO1_IO01_PWM1_OUT 0x02C 0x294 0x000 0x1 0x0 +#define MX8MN_IOMUXC_GPIO1_IO01_ANAMIX_REF_CLK_24M 0x02C 0x294 0x000 0x5 0x0 +#define MX8MN_IOMUXC_GPIO1_IO01_CCMSRCGPCMIX_EXT_CLK2 0x02C 0x294 0x000 0x6 0x0 +#define MX8MN_IOMUXC_GPIO1_IO02_GPIO1_IO2 0x030 0x298 0x000 0x0 0x0 +#define MX8MN_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0x030 0x298 0x000 0x1 0x0 +#define MX8MN_IOMUXC_GPIO1_IO02_WDOG1_WDOG_ANY 0x030 0x298 0x000 0x5 0x0 +#define MX8MN_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x034 0x29C 0x000 0x0 0x0 +#define MX8MN_IOMUXC_GPIO1_IO03_USDHC1_VSELECT 0x034 0x29C 0x000 0x1 0x0 +#define MX8MN_IOMUXC_GPIO1_IO03_SDMA1_EXT_EVENT0 0x034 0x29C 0x000 0x5 0x0 +#define MX8MN_IOMUXC_GPIO1_IO03_ANAMIX_XTAL_OK 0x034 0x29C 0x000 0x6 0x0 +#define MX8MN_IOMUXC_GPIO1_IO04_GPIO1_IO4 0x038 0x2A0 0x000 0x0 0x0 +#define MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x038 0x2A0 0x000 0x1 0x0 +#define MX8MN_IOMUXC_GPIO1_IO04_SDMA1_EXT_EVENT1 0x038 0x2A0 0x000 0x5 0x0 +#define MX8MN_IOMUXC_GPIO1_IO04_ANAMIX_XTAL_OK_LV 0x038 0x2A0 0x000 0x6 0x0 +#define MX8MN_IOMUXC_GPIO1_IO05_GPIO1_IO5 0x03C 0x2A4 0x000 0x0 0x0 +#define MX8MN_IOMUXC_GPIO1_IO05_M4_NMI 0x03C 0x2A4 0x000 0x1 0x0 +#define MX8MN_IOMUXC_GPIO1_IO05_CCMSRCGPCMIX_PMIC_READY 0x03C 0x2A4 0x4BC 0x5 0x0 +#define MX8MN_IOMUXC_GPIO1_IO05_CCMSRCGPCMIX_INT_BOOT 0x03C 0x2A4 0x000 0x6 0x0 +#define MX8MN_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x040 0x2A8 0x000 0x0 0x0 +#define MX8MN_IOMUXC_GPIO1_IO06_ENET1_MDC 0x040 0x2A8 0x000 0x1 0x0 +#define MX8MN_IOMUXC_GPIO1_IO06_USDHC1_CD_B 0x040 0x2A8 0x000 0x5 0x0 +#define MX8MN_IOMUXC_GPIO1_IO06_CCMSRCGPCMIX_EXT_CLK3 0x040 0x2A8 0x000 0x6 0x0 +#define MX8MN_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x044 0x2AC 0x000 0x0 0x0 +#define MX8MN_IOMUXC_GPIO1_IO07_ENET1_MDIO 0x044 0x2AC 0x4C0 0x1 0x0 +#define MX8MN_IOMUXC_GPIO1_IO07_USDHC1_WP 0x044 0x2AC 0x000 0x5 0x0 +#define MX8MN_IOMUXC_GPIO1_IO07_CCMSRCGPCMIX_EXT_CLK4 0x044 0x2AC 0x000 0x6 0x0 +#define MX8MN_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x048 0x2B0 0x000 0x0 0x0 +#define MX8MN_IOMUXC_GPIO1_IO08_ENET1_1588_EVENT0_IN 0x048 0x2B0 0x000 0x1 0x0 +#define MX8MN_IOMUXC_GPIO1_IO08_PWM1_OUT 0x048 0x2B0 0x000 0x2 0x0 +#define MX8MN_IOMUXC_GPIO1_IO08_USDHC2_RESET_B 0x048 0x2B0 0x000 0x5 0x0 +#define MX8MN_IOMUXC_GPIO1_IO08_CCMSRCGPCMIX_WAIT 0x048 0x2B0 0x000 0x6 0x0 +#define MX8MN_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x04C 0x2B4 0x000 0x0 0x0 +#define MX8MN_IOMUXC_GPIO1_IO09_ENET1_1588_EVENT0_OUT 0x04C 0x2B4 0x000 0x1 0x0 +#define MX8MN_IOMUXC_GPIO1_IO09_PWM2_OUT 0x04C 0x2B4 0x000 0x2 0x0 +#define MX8MN_IOMUXC_GPIO1_IO09_USDHC3_RESET_B 0x04C 0x2B4 0x000 0x4 0x0 +#define MX8MN_IOMUXC_GPIO1_IO09_SDMA2_EXT_EVENT0 0x04C 0x2B4 0x000 0x5 0x0 +#define MX8MN_IOMUXC_GPIO1_IO09_CCMSRCGPCMIX_STOP 0x04C 0x2B4 0x000 0x6 0x0 +#define MX8MN_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x050 0x2B8 0x000 0x0 0x0 +#define MX8MN_IOMUXC_GPIO1_IO10_USB1_OTG_ID 0x050 0x2B8 0x000 0x1 0x0 +#define MX8MN_IOMUXC_GPIO1_IO10_PWM3_OUT 0x050 0x2B8 0x000 0x2 0x0 +#define MX8MN_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x054 0x2BC 0x000 0x0 0x0 +#define MX8MN_IOMUXC_GPIO1_IO11_PWM2_OUT 0x054 0x2BC 0x000 0x1 0x0 +#define MX8MN_IOMUXC_GPIO1_IO11_USDHC3_VSELECT 0x054 0x2BC 0x000 0x4 0x0 +#define MX8MN_IOMUXC_GPIO1_IO11_CCMSRCGPCMIX_PMIC_READY 0x054 0x2BC 0x4BC 0x5 0x1 +#define MX8MN_IOMUXC_GPIO1_IO11_CCMSRCGPCMIX_OUT0 0x054 0x2BC 0x000 0x6 0x0 +#define MX8MN_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x058 0x2C0 0x000 0x0 0x0 +#define MX8MN_IOMUXC_GPIO1_IO12_USB1_OTG_PWR 0x058 0x2C0 0x000 0x1 0x0 +#define MX8MN_IOMUXC_GPIO1_IO12_SDMA2_EXT_EVENT1 0x058 0x2C0 0x000 0x5 0x0 +#define MX8MN_IOMUXC_GPIO1_IO12_CCMSRCGPCMIX_OUT1 0x058 0x2C0 0x000 0x6 0x0 +#define MX8MN_IOMUXC_GPIO1_IO13_GPIO1_IO13 0x05C 0x2C4 0x000 0x0 0x0 +#define MX8MN_IOMUXC_GPIO1_IO13_USB1_OTG_OC 0x05C 0x2C4 0x000 0x1 0x0 +#define MX8MN_IOMUXC_GPIO1_IO13_PWM2_OUT 0x05C 0x2C4 0x000 0x5 0x0 +#define MX8MN_IOMUXC_GPIO1_IO13_CCMSRCGPCMIX_OUT2 0x05C 0x2C4 0x000 0x6 0x0 +#define MX8MN_IOMUXC_GPIO1_IO14_GPIO1_IO14 0x060 0x2C8 0x000 0x0 0x0 +#define MX8MN_IOMUXC_GPIO1_IO14_USDHC3_CD_B 0x060 0x2C8 0x598 0x4 0x2 +#define MX8MN_IOMUXC_GPIO1_IO14_PWM3_OUT 0x060 0x2C8 0x000 0x5 0x0 +#define MX8MN_IOMUXC_GPIO1_IO14_CCMSRCGPCMIX_CLKO1 0x060 0x2C8 0x000 0x6 0x0 +#define MX8MN_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x064 0x2CC 0x000 0x0 0x0 +#define MX8MN_IOMUXC_GPIO1_IO15_USDHC3_WP 0x064 0x2CC 0x5B8 0x4 0x2 +#define MX8MN_IOMUXC_GPIO1_IO15_PWM4_OUT 0x064 0x2CC 0x000 0x5 0x0 +#define MX8MN_IOMUXC_GPIO1_IO15_CCMSRCGPCMIX_CLKO2 0x064 0x2CC 0x000 0x6 0x0 +#define MX8MN_IOMUXC_ENET_MDC_ENET1_MDC 0x068 0x2D0 0x000 0x0 0x0 +#define MX8MN_IOMUXC_ENET_MDC_SAI6_TX_DATA0 0x068 0x2D0 0x000 0x2 0x0 +#define MX8MN_IOMUXC_ENET_MDC_PDM_BIT_STREAM3 0x068 0x2D0 0x540 0x3 0x1 +#define MX8MN_IOMUXC_ENET_MDC_SPDIF1_OUT 0x068 0x2D0 0x000 0x4 0x0 +#define MX8MN_IOMUXC_ENET_MDC_GPIO1_IO16 0x068 0x2D0 0x000 0x5 0x0 +#define MX8MN_IOMUXC_ENET_MDC_USDHC3_STROBE 0x068 0x2D0 0x59C 0x6 0x1 +#define MX8MN_IOMUXC_ENET_MDIO_ENET1_MDIO 0x06C 0x2D4 0x4C0 0x0 0x1 +#define MX8MN_IOMUXC_ENET_MDIO_SAI6_TX_SYNC 0x06C 0x2D4 0x000 0x2 0x0 +#define MX8MN_IOMUXC_ENET_MDIO_PDM_BIT_STREAM2 0x06C 0x2D4 0x53C 0x3 0x1 +#define MX8MN_IOMUXC_ENET_MDIO_SPDIF1_IN 0x06C 0x2D4 0x5CC 0x4 0x1 +#define MX8MN_IOMUXC_ENET_MDIO_GPIO1_IO17 0x06C 0x2D4 0x000 0x5 0x0 +#define MX8MN_IOMUXC_ENET_MDIO_USDHC3_DATA5 0x06C 0x2D4 0x550 0x6 0x1 +#define MX8MN_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x070 0x2D8 0x000 0x0 0x0 +#define MX8MN_IOMUXC_ENET_TD3_SAI6_TX_BCLK 0x070 0x2D8 0x000 0x2 0x0 +#define MX8MN_IOMUXC_ENET_TD3_PDM_BIT_STREAM1 0x070 0x2D8 0x538 0x3 0x1 +#define MX8MN_IOMUXC_ENET_TD3_SPDIF1_EXT_CLK 0x070 0x2D8 0x568 0x4 0x1 +#define MX8MN_IOMUXC_ENET_TD3_GPIO1_IO18 0x070 0x2D8 0x000 0x5 0x0 +#define MX8MN_IOMUXC_ENET_TD3_USDHC3_DATA6 0x070 0x2D8 0x584 0x6 0x1 +#define MX8MN_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x074 0x2DC 0x000 0x0 0x0 +#define MX8MN_IOMUXC_ENET_TD2_ENET1_TX_CLK 0x074 0x2DC 0x5A4 0x1 0x0 +#define MX8MN_IOMUXC_ENET_TD2_CCMSRCGPCMIX_ENET_REF_CLK_ROOT 0x074 0x2DC 0x5A4 0x1 0x0 +#define MX8MN_IOMUXC_ENET_TD2_SAI6_RX_DATA0 0x074 0x2DC 0x000 0x2 0x0 +#define MX8MN_IOMUXC_ENET_TD2_PDM_BIT_STREAM3 0x074 0x2DC 0x540 0x3 0x2 +#define MX8MN_IOMUXC_ENET_TD2_GPIO1_IO19 0x074 0x2DC 0x000 0x5 0x0 +#define MX8MN_IOMUXC_ENET_TD2_USDHC3_DATA7 0x074 0x2DC 0x54C 0x6 0x1 +#define MX8MN_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x078 0x2E0 0x000 0x0 0x0 +#define MX8MN_IOMUXC_ENET_TD1_SAI6_RX_SYNC 0x078 0x2E0 0x000 0x2 0x0 +#define MX8MN_IOMUXC_ENET_TD1_PDM_BIT_STREAM2 0x078 0x2E0 0x53C 0x3 0x2 +#define MX8MN_IOMUXC_ENET_TD1_GPIO1_IO20 0x078 0x2E0 0x000 0x5 0x0 +#define MX8MN_IOMUXC_ENET_TD1_USDHC3_CD_B 0x078 0x2E0 0x598 0x6 0x3 +#define MX8MN_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x07C 0x2E4 0x000 0x0 0x0 +#define MX8MN_IOMUXC_ENET_TD0_SAI6_RX_BCLK 0x07C 0x2E4 0x000 0x2 0x0 +#define MX8MN_IOMUXC_ENET_TD0_PDM_BIT_STREAM1 0x07C 0x2E4 0x538 0x3 0x2 +#define MX8MN_IOMUXC_ENET_TD0_GPIO1_IO21 0x07C 0x2E4 0x000 0x5 0x0 +#define MX8MN_IOMUXC_ENET_TD0_USDHC3_WP 0x07C 0x2E4 0x5B8 0x6 0x3 +#define MX8MN_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x080 0x2E8 0x000 0x0 0x0 +#define MX8MN_IOMUXC_ENET_TX_CTL_SAI6_MCLK 0x080 0x2E8 0x000 0x2 0x0 +#define MX8MN_IOMUXC_ENET_TX_CTL_GPIO1_IO22 0x080 0x2E8 0x000 0x5 0x0 +#define MX8MN_IOMUXC_ENET_TX_CTL_USDHC3_DATA0 0x080 0x2E8 0x5B4 0x6 0x1 +#define MX8MN_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x084 0x2EC 0x000 0x0 0x0 +#define MX8MN_IOMUXC_ENET_TXC_ENET1_TX_ER 0x084 0x2EC 0x000 0x1 0x0 +#define MX8MN_IOMUXC_ENET_TXC_SAI7_TX_DATA0 0x084 0x2EC 0x000 0x2 0x0 +#define MX8MN_IOMUXC_ENET_TXC_GPIO1_IO23 0x084 0x2EC 0x000 0x5 0x0 +#define MX8MN_IOMUXC_ENET_TXC_USDHC3_DATA1 0x084 0x2EC 0x5B0 0x6 0x1 +#define MX8MN_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x088 0x2F0 0x574 0x0 0x0 +#define MX8MN_IOMUXC_ENET_RX_CTL_SAI7_TX_SYNC 0x088 0x2F0 0x000 0x2 0x0 +#define MX8MN_IOMUXC_ENET_RX_CTL_PDM_BIT_STREAM3 0x088 0x2F0 0x540 0x3 0x3 +#define MX8MN_IOMUXC_ENET_RX_CTL_GPIO1_IO24 0x088 0x2F0 0x000 0x5 0x0 +#define MX8MN_IOMUXC_ENET_RX_CTL_USDHC3_DATA2 0x088 0x2F0 0x5E4 0x6 0x1 +#define MX8MN_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x08C 0x2F4 0x000 0x0 0x0 +#define MX8MN_IOMUXC_ENET_RXC_ENET1_RX_ER 0x08C 0x2F4 0x5C8 0x1 0x0 +#define MX8MN_IOMUXC_ENET_RXC_SAI7_TX_BCLK 0x08C 0x2F4 0x000 0x2 0x0 +#define MX8MN_IOMUXC_ENET_RXC_PDM_BIT_STREAM2 0x08C 0x2F4 0x53C 0x3 0x3 +#define MX8MN_IOMUXC_ENET_RXC_GPIO1_IO25 0x08C 0x2F4 0x000 0x5 0x0 +#define MX8MN_IOMUXC_ENET_RXC_USDHC3_DATA3 0x08C 0x2F4 0x5E0 0x6 0x1 +#define MX8MN_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x090 0x2F8 0x57C 0x0 0x0 +#define MX8MN_IOMUXC_ENET_RD0_SAI7_RX_DATA0 0x090 0x2F8 0x000 0x2 0x0 +#define MX8MN_IOMUXC_ENET_RD0_PDM_BIT_STREAM1 0x090 0x2F8 0x538 0x3 0x3 +#define MX8MN_IOMUXC_ENET_RD0_GPIO1_IO26 0x090 0x2F8 0x000 0x5 0x0 +#define MX8MN_IOMUXC_ENET_RD0_USDHC3_DATA4 0x090 0x2F8 0x558 0x6 0x1 +#define MX8MN_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x094 0x2FC 0x554 0x0 0x0 +#define MX8MN_IOMUXC_ENET_RD1_SAI7_RX_SYNC 0x094 0x2FC 0x000 0x2 0x0 +#define MX8MN_IOMUXC_ENET_RD1_PDM_BIT_STREAM0 0x094 0x2FC 0x534 0x3 0x1 +#define MX8MN_IOMUXC_ENET_RD1_GPIO1_IO27 0x094 0x2FC 0x000 0x5 0x0 +#define MX8MN_IOMUXC_ENET_RD1_USDHC3_RESET_B 0x094 0x2FC 0x000 0x6 0x0 +#define MX8MN_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x098 0x300 0x000 0x0 0x0 +#define MX8MN_IOMUXC_ENET_RD2_SAI7_RX_BCLK 0x098 0x300 0x000 0x2 0x0 +#define MX8MN_IOMUXC_ENET_RD2_PDM_CLK 0x098 0x300 0x000 0x3 0x0 +#define MX8MN_IOMUXC_ENET_RD2_GPIO1_IO28 0x098 0x300 0x000 0x5 0x0 +#define MX8MN_IOMUXC_ENET_RD2_USDHC3_CLK 0x098 0x300 0x5A0 0x6 0x1 +#define MX8MN_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x09C 0x304 0x000 0x0 0x0 +#define MX8MN_IOMUXC_ENET_RD3_SAI7_MCLK 0x09C 0x304 0x000 0x2 0x0 +#define MX8MN_IOMUXC_ENET_RD3_SPDIF1_IN 0x09C 0x304 0x5CC 0x3 0x5 +#define MX8MN_IOMUXC_ENET_RD3_GPIO1_IO29 0x09C 0x304 0x000 0x5 0x0 +#define MX8MN_IOMUXC_ENET_RD3_USDHC3_CMD 0x09C 0x304 0x5DC 0x6 0x1 +#define MX8MN_IOMUXC_SD1_CLK_USDHC1_CLK 0x0A0 0x308 0x000 0x0 0x0 +#define MX8MN_IOMUXC_SD1_CLK_ENET1_MDC 0x0A0 0x308 0x000 0x1 0x0 +#define MX8MN_IOMUXC_SD1_CLK_UART1_DCE_TX 0x0A0 0x308 0x000 0x4 0x0 +#define MX8MN_IOMUXC_SD1_CLK_UART1_DTE_RX 0x0A0 0x308 0x4F4 0x4 0x4 +#define MX8MN_IOMUXC_SD1_CLK_GPIO2_IO0 0x0A0 0x308 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SD1_CMD_USDHC1_CMD 0x0A4 0x30C 0x000 0x0 0x0 +#define MX8MN_IOMUXC_SD1_CMD_ENET1_MDIO 0x0A4 0x30C 0x4C0 0x1 0x3 +#define MX8MN_IOMUXC_SD1_CMD_UART1_DCE_RX 0x0A4 0x30C 0x4F4 0x4 0x5 +#define MX8MN_IOMUXC_SD1_CMD_UART1_DTE_TX 0x0A4 0x30C 0x000 0x4 0x0 +#define MX8MN_IOMUXC_SD1_CMD_GPIO2_IO1 0x0A4 0x30C 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x0A8 0x310 0x000 0x0 0x0 +#define MX8MN_IOMUXC_SD1_DATA0_ENET1_RGMII_TD1 0x0A8 0x310 0x000 0x1 0x0 +#define MX8MN_IOMUXC_SD1_DATA0_UART1_DCE_RTS_B 0x0A8 0x310 0x4F0 0x4 0x4 +#define MX8MN_IOMUXC_SD1_DATA0_UART1_DTE_CTS_B 0x0A8 0x310 0x000 0x4 0x0 +#define MX8MN_IOMUXC_SD1_DATA0_GPIO2_IO2 0x0A8 0x310 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x0AC 0x314 0x000 0x0 0x0 +#define MX8MN_IOMUXC_SD1_DATA1_ENET1_RGMII_TD0 0x0AC 0x314 0x000 0x1 0x0 +#define MX8MN_IOMUXC_SD1_DATA1_UART1_DCE_CTS_B 0x0AC 0x314 0x000 0x4 0x0 +#define MX8MN_IOMUXC_SD1_DATA1_UART1_DTE_RTS_B 0x0AC 0x314 0x4F0 0x4 0x5 +#define MX8MN_IOMUXC_SD1_DATA1_GPIO2_IO3 0x0AC 0x314 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x0B0 0x318 0x000 0x0 0x0 +#define MX8MN_IOMUXC_SD1_DATA2_ENET1_RGMII_RD0 0x0B0 0x318 0x57C 0x1 0x1 +#define MX8MN_IOMUXC_SD1_DATA2_UART2_DCE_TX 0x0B0 0x318 0x000 0x4 0x0 +#define MX8MN_IOMUXC_SD1_DATA2_UART2_DTE_RX 0x0B0 0x318 0x4FC 0x4 0x4 +#define MX8MN_IOMUXC_SD1_DATA2_GPIO2_IO4 0x0B0 0x318 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x0B4 0x31C 0x000 0x0 0x0 +#define MX8MN_IOMUXC_SD1_DATA3_ENET1_RGMII_RD1 0x0B4 0x31C 0x554 0x1 0x1 +#define MX8MN_IOMUXC_SD1_DATA3_UART2_DCE_RX 0x0B4 0x31C 0x4FC 0x4 0x5 +#define MX8MN_IOMUXC_SD1_DATA3_UART2_DTE_TX 0x0B4 0x31C 0x000 0x4 0x0 +#define MX8MN_IOMUXC_SD1_DATA3_GPIO2_IO5 0x0B4 0x31C 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SD1_DATA4_USDHC1_DATA4 0x0B8 0x320 0x000 0x0 0x0 +#define MX8MN_IOMUXC_SD1_DATA4_ENET1_RGMII_TX_CTL 0x0B8 0x320 0x000 0x1 0x0 +#define MX8MN_IOMUXC_SD1_DATA4_I2C1_SCL 0x0B8 0x320 0x55C 0x3 0x1 +#define MX8MN_IOMUXC_SD1_DATA4_UART2_DCE_RTS_B 0x0B8 0x320 0x4F8 0x4 0x4 +#define MX8MN_IOMUXC_SD1_DATA4_UART2_DTE_CTS_B 0x0B8 0x320 0x000 0x4 0x0 +#define MX8MN_IOMUXC_SD1_DATA4_GPIO2_IO6 0x0B8 0x320 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SD1_DATA5_USDHC1_DATA5 0x0BC 0x324 0x000 0x0 0x0 +#define MX8MN_IOMUXC_SD1_DATA5_ENET1_TX_ER 0x0BC 0x324 0x000 0x1 0x0 +#define MX8MN_IOMUXC_SD1_DATA5_I2C1_SDA 0x0BC 0x324 0x56C 0x3 0x1 +#define MX8MN_IOMUXC_SD1_DATA5_UART2_DCE_CTS_B 0x0BC 0x324 0x000 0x4 0x0 +#define MX8MN_IOMUXC_SD1_DATA5_UART2_DTE_RTS_B 0x0BC 0x324 0x4F8 0x4 0x5 +#define MX8MN_IOMUXC_SD1_DATA5_GPIO2_IO7 0x0BC 0x324 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SD1_DATA6_USDHC1_DATA6 0x0C0 0x328 0x000 0x0 0x0 +#define MX8MN_IOMUXC_SD1_DATA6_ENET1_RGMII_RX_CTL 0x0C0 0x328 0x574 0x1 0x1 +#define MX8MN_IOMUXC_SD1_DATA6_I2C2_SCL 0x0C0 0x328 0x5D0 0x3 0x1 +#define MX8MN_IOMUXC_SD1_DATA6_UART3_DCE_TX 0x0C0 0x328 0x000 0x4 0x0 +#define MX8MN_IOMUXC_SD1_DATA6_UART3_DTE_RX 0x0C0 0x328 0x504 0x4 0x4 +#define MX8MN_IOMUXC_SD1_DATA6_GPIO2_IO8 0x0C0 0x328 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SD1_DATA7_USDHC1_DATA7 0x0C4 0x32C 0x000 0x0 0x0 +#define MX8MN_IOMUXC_SD1_DATA7_ENET1_RX_ER 0x0C4 0x32C 0x5C8 0x1 0x1 +#define MX8MN_IOMUXC_SD1_DATA7_I2C2_SDA 0x0C4 0x32C 0x560 0x3 0x1 +#define MX8MN_IOMUXC_SD1_DATA7_UART3_DCE_RX 0x0C4 0x32C 0x504 0x4 0x5 +#define MX8MN_IOMUXC_SD1_DATA7_UART3_DTE_TX 0x0C4 0x32C 0x000 0x4 0x0 +#define MX8MN_IOMUXC_SD1_DATA7_GPIO2_IO9 0x0C4 0x32C 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0x0C8 0x330 0x000 0x0 0x0 +#define MX8MN_IOMUXC_SD1_RESET_B_ENET1_TX_CLK 0x0C8 0x330 0x5A4 0x1 0x1 +#define MX8MN_IOMUXC_SD1_RESET_B_CCMSRCGPCMIX_ENET_REF_CLK_ROOT 0x0C8 0x330 0x5A4 0x1 0x0 +#define MX8MN_IOMUXC_SD1_RESET_B_I2C3_SCL 0x0C8 0x330 0x588 0x3 0x1 +#define MX8MN_IOMUXC_SD1_RESET_B_UART3_DCE_RTS_B 0x0C8 0x330 0x500 0x4 0x2 +#define MX8MN_IOMUXC_SD1_RESET_B_UART3_DTE_CTS_B 0x0C8 0x330 0x000 0x4 0x0 +#define MX8MN_IOMUXC_SD1_RESET_B_GPIO2_IO10 0x0C8 0x330 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x0CC 0x334 0x000 0x0 0x0 +#define MX8MN_IOMUXC_SD1_STROBE_I2C3_SDA 0x0CC 0x334 0x5BC 0x3 0x1 +#define MX8MN_IOMUXC_SD1_STROBE_UART3_DCE_CTS_B 0x0CC 0x334 0x000 0x4 0x0 +#define MX8MN_IOMUXC_SD1_STROBE_UART3_DTE_RTS_B 0x0CC 0x334 0x500 0x4 0x3 +#define MX8MN_IOMUXC_SD1_STROBE_GPIO2_IO11 0x0CC 0x334 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SD2_CD_B_USDHC2_CD_B 0x0D0 0x338 0x000 0x0 0x0 +#define MX8MN_IOMUXC_SD2_CD_B_GPIO2_IO12 0x0D0 0x338 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SD2_CD_B_CCMSRCGPCMIX_TESTER_ACK 0x0D0 0x338 0x000 0x6 0x0 +#define MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK 0x0D4 0x33C 0x000 0x0 0x0 +#define MX8MN_IOMUXC_SD2_CLK_SAI5_RX_SYNC 0x0D4 0x33C 0x4E4 0x1 0x1 +#define MX8MN_IOMUXC_SD2_CLK_ECSPI2_SCLK 0x0D4 0x33C 0x580 0x2 0x1 +#define MX8MN_IOMUXC_SD2_CLK_UART4_DCE_RX 0x0D4 0x33C 0x50C 0x3 0x4 +#define MX8MN_IOMUXC_SD2_CLK_UART4_DTE_TX 0x0D4 0x33C 0x000 0x3 0x0 +#define MX8MN_IOMUXC_SD2_CLK_SAI5_MCLK 0x0D4 0x33C 0x594 0x4 0x1 +#define MX8MN_IOMUXC_SD2_CLK_GPIO2_IO13 0x0D4 0x33C 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SD2_CLK_CCMSRCGPCMIX_OBSERVE0 0x0D4 0x33C 0x000 0x6 0x0 +#define MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD 0x0D8 0x340 0x000 0x0 0x0 +#define MX8MN_IOMUXC_SD2_CMD_SAI5_RX_BCLK 0x0D8 0x340 0x4D0 0x1 0x1 +#define MX8MN_IOMUXC_SD2_CMD_ECSPI2_MOSI 0x0D8 0x340 0x590 0x2 0x1 +#define MX8MN_IOMUXC_SD2_CMD_UART4_DCE_TX 0x0D8 0x340 0x000 0x3 0x0 +#define MX8MN_IOMUXC_SD2_CMD_UART4_DTE_RX 0x0D8 0x340 0x50C 0x3 0x5 +#define MX8MN_IOMUXC_SD2_CMD_PDM_CLK 0x0D8 0x340 0x000 0x4 0x0 +#define MX8MN_IOMUXC_SD2_CMD_GPIO2_IO14 0x0D8 0x340 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SD2_CMD_CCMSRCGPCMIX_OBSERVE1 0x0D8 0x340 0x000 0x6 0x0 +#define MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x0DC 0x344 0x000 0x0 0x0 +#define MX8MN_IOMUXC_SD2_DATA0_SAI5_RX_DATA0 0x0DC 0x344 0x4D4 0x1 0x1 +#define MX8MN_IOMUXC_SD2_DATA0_I2C4_SDA 0x0DC 0x344 0x58C 0x2 0x1 +#define MX8MN_IOMUXC_SD2_DATA0_UART2_DCE_RX 0x0DC 0x344 0x4FC 0x3 0x6 +#define MX8MN_IOMUXC_SD2_DATA0_UART2_DTE_TX 0x0DC 0x344 0x000 0x3 0x0 +#define MX8MN_IOMUXC_SD2_DATA0_PDM_BIT_STREAM0 0x0DC 0x344 0x534 0x4 0x2 +#define MX8MN_IOMUXC_SD2_DATA0_GPIO2_IO15 0x0DC 0x344 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SD2_DATA0_CCMSRCGPCMIX_OBSERVE2 0x0DC 0x344 0x000 0x6 0x0 +#define MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x0E0 0x348 0x000 0x0 0x0 +#define MX8MN_IOMUXC_SD2_DATA1_SAI5_TX_SYNC 0x0E0 0x348 0x4EC 0x1 0x1 +#define MX8MN_IOMUXC_SD2_DATA1_I2C4_SCL 0x0E0 0x348 0x5D4 0x2 0x1 +#define MX8MN_IOMUXC_SD2_DATA1_UART2_DCE_TX 0x0E0 0x348 0x000 0x3 0x0 +#define MX8MN_IOMUXC_SD2_DATA1_UART2_DTE_RX 0x0E0 0x348 0x4FC 0x3 0x7 +#define MX8MN_IOMUXC_SD2_DATA1_PDM_BIT_STREAM1 0x0E0 0x348 0x538 0x4 0x4 +#define MX8MN_IOMUXC_SD2_DATA1_GPIO2_IO16 0x0E0 0x348 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SD2_DATA1_CCMSRCGPCMIX_WAIT 0x0E0 0x348 0x000 0x6 0x0 +#define MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x0E4 0x34C 0x000 0x0 0x0 +#define MX8MN_IOMUXC_SD2_DATA2_SAI5_TX_BCLK 0x0E4 0x34C 0x4E8 0x1 0x1 +#define MX8MN_IOMUXC_SD2_DATA2_ECSPI2_SS0 0x0E4 0x34C 0x570 0x2 0x2 +#define MX8MN_IOMUXC_SD2_DATA2_SPDIF1_OUT 0x0E4 0x34C 0x000 0x3 0x0 +#define MX8MN_IOMUXC_SD2_DATA2_PDM_BIT_STREAM2 0x0E4 0x34C 0x53C 0x4 0x4 +#define MX8MN_IOMUXC_SD2_DATA2_GPIO2_IO17 0x0E4 0x34C 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SD2_DATA2_CCMSRCGPCMIX_STOP 0x0E4 0x34C 0x000 0x6 0x0 +#define MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x0E8 0x350 0x000 0x0 0x0 +#define MX8MN_IOMUXC_SD2_DATA3_SAI5_TX_DATA0 0x0E8 0x350 0x000 0x1 0x0 +#define MX8MN_IOMUXC_SD2_DATA3_ECSPI2_MISO 0x0E8 0x350 0x578 0x2 0x1 +#define MX8MN_IOMUXC_SD2_DATA3_SPDIF1_IN 0x0E8 0x350 0x5CC 0x3 0x2 +#define MX8MN_IOMUXC_SD2_DATA3_PDM_BIT_STREAM3 0x0E8 0x350 0x540 0x4 0x4 +#define MX8MN_IOMUXC_SD2_DATA3_GPIO2_IO18 0x0E8 0x350 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SD2_DATA3_CCMSRCGPCMIX_EARLY_RESET 0x0E8 0x350 0x000 0x6 0x0 +#define MX8MN_IOMUXC_SD2_RESET_B_USDHC2_RESET_B 0x0EC 0x354 0x000 0x0 0x0 +#define MX8MN_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x0EC 0x354 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SD2_RESET_B_CCMSRCGPCMIX_SYSTEM_RESET 0x0EC 0x354 0x000 0x6 0x0 +#define MX8MN_IOMUXC_SD2_WP_USDHC2_WP 0x0F0 0x358 0x000 0x0 0x0 +#define MX8MN_IOMUXC_SD2_WP_GPIO2_IO20 0x0F0 0x358 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SD2_WP_CORESIGHT_EVENTI 0x0F0 0x358 0x000 0x6 0x0 +#define MX8MN_IOMUXC_NAND_ALE_RAWNAND_ALE 0x0F4 0x35C 0x000 0x0 0x0 +#define MX8MN_IOMUXC_NAND_ALE_QSPI_A_SCLK 0x0F4 0x35C 0x000 0x1 0x0 +#define MX8MN_IOMUXC_NAND_ALE_PDM_BIT_STREAM0 0x0F4 0x35C 0x534 0x3 0x3 +#define MX8MN_IOMUXC_NAND_ALE_UART3_DCE_RX 0x0F4 0x35C 0x504 0x4 0x6 +#define MX8MN_IOMUXC_NAND_ALE_UART3_DTE_TX 0x0F4 0x35C 0x000 0x4 0x0 +#define MX8MN_IOMUXC_NAND_ALE_GPIO3_IO0 0x0F4 0x35C 0x000 0x5 0x0 +#define MX8MN_IOMUXC_NAND_ALE_CORESIGHT_TRACE_CLK 0x0F4 0x35C 0x000 0x6 0x0 +#define MX8MN_IOMUXC_NAND_CE0_B_RAWNAND_CE0_B 0x0F8 0x360 0x000 0x0 0x0 +#define MX8MN_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B 0x0F8 0x360 0x000 0x1 0x0 +#define MX8MN_IOMUXC_NAND_CE0_B_PDM_BIT_STREAM1 0x0F8 0x360 0x538 0x3 0x5 +#define MX8MN_IOMUXC_NAND_CE0_B_UART3_DCE_TX 0x0F8 0x360 0x000 0x4 0x0 +#define MX8MN_IOMUXC_NAND_CE0_B_UART3_DTE_RX 0x0F8 0x360 0x504 0x4 0x7 +#define MX8MN_IOMUXC_NAND_CE0_B_GPIO3_IO1 0x0F8 0x360 0x000 0x5 0x0 +#define MX8MN_IOMUXC_NAND_CE0_B_CORESIGHT_TRACE_CTL 0x0F8 0x360 0x000 0x6 0x0 +#define MX8MN_IOMUXC_NAND_CE1_B_RAWNAND_CE1_B 0x0FC 0x364 0x000 0x0 0x0 +#define MX8MN_IOMUXC_NAND_CE1_B_QSPI_A_SS1_B 0x0FC 0x364 0x000 0x1 0x0 +#define MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x0FC 0x364 0x59C 0x2 0x0 +#define MX8MN_IOMUXC_NAND_CE1_B_PDM_BIT_STREAM0 0x0FC 0x364 0x534 0x3 0x4 +#define MX8MN_IOMUXC_NAND_CE1_B_I2C4_SCL 0x0FC 0x364 0x5D4 0x4 0x2 +#define MX8MN_IOMUXC_NAND_CE1_B_GPIO3_IO2 0x0FC 0x364 0x000 0x5 0x0 +#define MX8MN_IOMUXC_NAND_CE1_B_CORESIGHT_TRACE0 0x0FC 0x364 0x000 0x6 0x0 +#define MX8MN_IOMUXC_NAND_CE2_B_RAWNAND_CE2_B 0x100 0x368 0x000 0x0 0x0 +#define MX8MN_IOMUXC_NAND_CE2_B_QSPI_B_SS0_B 0x100 0x368 0x000 0x1 0x0 +#define MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x100 0x368 0x550 0x2 0x0 +#define MX8MN_IOMUXC_NAND_CE2_B_PDM_BIT_STREAM1 0x100 0x368 0x538 0x3 0x6 +#define MX8MN_IOMUXC_NAND_CE2_B_I2C4_SDA 0x100 0x368 0x58C 0x4 0x2 +#define MX8MN_IOMUXC_NAND_CE2_B_GPIO3_IO3 0x100 0x368 0x000 0x5 0x0 +#define MX8MN_IOMUXC_NAND_CE2_B_CORESIGHT_TRACE1 0x100 0x368 0x000 0x6 0x0 +#define MX8MN_IOMUXC_NAND_CE3_B_RAWNAND_CE3_B 0x104 0x36C 0x000 0x0 0x0 +#define MX8MN_IOMUXC_NAND_CE3_B_QSPI_B_SS1_B 0x104 0x36C 0x000 0x1 0x0 +#define MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x104 0x36C 0x584 0x2 0x0 +#define MX8MN_IOMUXC_NAND_CE3_B_PDM_BIT_STREAM2 0x104 0x36C 0x53C 0x3 0x5 +#define MX8MN_IOMUXC_NAND_CE3_B_I2C3_SDA 0x104 0x36C 0x5BC 0x4 0x2 +#define MX8MN_IOMUXC_NAND_CE3_B_GPIO3_IO4 0x104 0x36C 0x000 0x5 0x0 +#define MX8MN_IOMUXC_NAND_CE3_B_CORESIGHT_TRACE2 0x104 0x36C 0x000 0x6 0x0 +#define MX8MN_IOMUXC_NAND_CLE_RAWNAND_CLE 0x108 0x370 0x000 0x0 0x0 +#define MX8MN_IOMUXC_NAND_CLE_QSPI_B_SCLK 0x108 0x370 0x000 0x1 0x0 +#define MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7 0x108 0x370 0x54C 0x2 0x0 +#define MX8MN_IOMUXC_NAND_CLE_GPIO3_IO5 0x108 0x370 0x000 0x5 0x0 +#define MX8MN_IOMUXC_NAND_CLE_CORESIGHT_TRACE3 0x108 0x370 0x000 0x6 0x0 +#define MX8MN_IOMUXC_NAND_DATA00_RAWNAND_DATA00 0x10C 0x374 0x000 0x0 0x0 +#define MX8MN_IOMUXC_NAND_DATA00_QSPI_A_DATA0 0x10C 0x374 0x000 0x1 0x0 +#define MX8MN_IOMUXC_NAND_DATA00_PDM_BIT_STREAM2 0x10C 0x374 0x53C 0x3 0x6 +#define MX8MN_IOMUXC_NAND_DATA00_UART4_DCE_RX 0x10C 0x374 0x50C 0x4 0x6 +#define MX8MN_IOMUXC_NAND_DATA00_UART4_DTE_TX 0x10C 0x374 0x000 0x4 0x0 +#define MX8MN_IOMUXC_NAND_DATA00_GPIO3_IO6 0x10C 0x374 0x000 0x5 0x0 +#define MX8MN_IOMUXC_NAND_DATA00_CORESIGHT_TRACE4 0x10C 0x374 0x000 0x6 0x0 +#define MX8MN_IOMUXC_NAND_DATA01_RAWNAND_DATA01 0x110 0x378 0x000 0x0 0x0 +#define MX8MN_IOMUXC_NAND_DATA01_QSPI_A_DATA1 0x110 0x378 0x000 0x1 0x0 +#define MX8MN_IOMUXC_NAND_DATA01_PDM_BIT_STREAM3 0x110 0x378 0x540 0x3 0x5 +#define MX8MN_IOMUXC_NAND_DATA01_UART4_DCE_TX 0x110 0x378 0x000 0x4 0x0 +#define MX8MN_IOMUXC_NAND_DATA01_UART4_DTE_RX 0x110 0x378 0x50C 0x4 0x7 +#define MX8MN_IOMUXC_NAND_DATA01_GPIO3_IO7 0x110 0x378 0x000 0x5 0x0 +#define MX8MN_IOMUXC_NAND_DATA01_CORESIGHT_TRACE5 0x110 0x378 0x000 0x6 0x0 +#define MX8MN_IOMUXC_NAND_DATA02_RAWNAND_DATA02 0x114 0x37C 0x000 0x0 0x0 +#define MX8MN_IOMUXC_NAND_DATA02_QSPI_A_DATA2 0x114 0x37C 0x000 0x1 0x0 +#define MX8MN_IOMUXC_NAND_DATA02_USDHC3_CD_B 0x114 0x37C 0x598 0x2 0x0 +#define MX8MN_IOMUXC_NAND_DATA02_I2C4_SDA 0x114 0x37C 0x58C 0x4 0x3 +#define MX8MN_IOMUXC_NAND_DATA02_GPIO3_IO8 0x114 0x37C 0x000 0x5 0x0 +#define MX8MN_IOMUXC_NAND_DATA02_CORESIGHT_TRACE6 0x114 0x37C 0x000 0x6 0x0 +#define MX8MN_IOMUXC_NAND_DATA03_RAWNAND_DATA03 0x118 0x380 0x000 0x0 0x0 +#define MX8MN_IOMUXC_NAND_DATA03_QSPI_A_DATA3 0x118 0x380 0x000 0x1 0x0 +#define MX8MN_IOMUXC_NAND_DATA03_USDHC3_WP 0x118 0x380 0x5B8 0x2 0x0 +#define MX8MN_IOMUXC_NAND_DATA03_GPIO3_IO9 0x118 0x380 0x000 0x5 0x0 +#define MX8MN_IOMUXC_NAND_DATA03_CORESIGHT_TRACE7 0x118 0x380 0x000 0x6 0x0 +#define MX8MN_IOMUXC_NAND_DATA04_RAWNAND_DATA04 0x11C 0x384 0x000 0x0 0x0 +#define MX8MN_IOMUXC_NAND_DATA04_QSPI_B_DATA0 0x11C 0x384 0x000 0x1 0x0 +#define MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x11C 0x384 0x5B4 0x2 0x0 +#define MX8MN_IOMUXC_NAND_DATA04_GPIO3_IO10 0x11C 0x384 0x000 0x5 0x0 +#define MX8MN_IOMUXC_NAND_DATA04_CORESIGHT_TRACE8 0x11C 0x384 0x000 0x6 0x0 +#define MX8MN_IOMUXC_NAND_DATA05_RAWNAND_DATA05 0x120 0x388 0x000 0x0 0x0 +#define MX8MN_IOMUXC_NAND_DATA05_QSPI_B_DATA1 0x120 0x388 0x000 0x1 0x0 +#define MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x120 0x388 0x5B0 0x2 0x0 +#define MX8MN_IOMUXC_NAND_DATA05_GPIO3_IO11 0x120 0x388 0x000 0x5 0x0 +#define MX8MN_IOMUXC_NAND_DATA05_CORESIGHT_TRACE9 0x120 0x388 0x000 0x6 0x0 +#define MX8MN_IOMUXC_NAND_DATA06_RAWNAND_DATA06 0x124 0x38C 0x000 0x0 0x0 +#define MX8MN_IOMUXC_NAND_DATA06_QSPI_B_DATA2 0x124 0x38C 0x000 0x1 0x0 +#define MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x124 0x38C 0x5E4 0x2 0x0 +#define MX8MN_IOMUXC_NAND_DATA06_GPIO3_IO12 0x124 0x38C 0x000 0x5 0x0 +#define MX8MN_IOMUXC_NAND_DATA06_CORESIGHT_TRACE10 0x124 0x38C 0x000 0x6 0x0 +#define MX8MN_IOMUXC_NAND_DATA07_RAWNAND_DATA07 0x128 0x390 0x000 0x0 0x0 +#define MX8MN_IOMUXC_NAND_DATA07_QSPI_B_DATA3 0x128 0x390 0x000 0x1 0x0 +#define MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x128 0x390 0x5E0 0x2 0x0 +#define MX8MN_IOMUXC_NAND_DATA07_GPIO3_IO13 0x128 0x390 0x000 0x5 0x0 +#define MX8MN_IOMUXC_NAND_DATA07_CORESIGHT_TRACE11 0x128 0x390 0x000 0x6 0x0 +#define MX8MN_IOMUXC_NAND_DQS_RAWNAND_DQS 0x12C 0x394 0x000 0x0 0x0 +#define MX8MN_IOMUXC_NAND_DQS_QSPI_A_DQS 0x12C 0x394 0x000 0x1 0x0 +#define MX8MN_IOMUXC_NAND_DQS_PDM_CLK 0x12C 0x394 0x000 0x3 0x0 +#define MX8MN_IOMUXC_NAND_DQS_I2C3_SCL 0x12C 0x394 0x588 0x4 0x2 +#define MX8MN_IOMUXC_NAND_DQS_GPIO3_IO14 0x12C 0x394 0x000 0x5 0x0 +#define MX8MN_IOMUXC_NAND_DQS_CORESIGHT_TRACE12 0x12C 0x394 0x000 0x6 0x0 +#define MX8MN_IOMUXC_NAND_RE_B_RAWNAND_RE_B 0x130 0x398 0x000 0x0 0x0 +#define MX8MN_IOMUXC_NAND_RE_B_QSPI_B_DQS 0x130 0x398 0x000 0x1 0x0 +#define MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x130 0x398 0x558 0x2 0x0 +#define MX8MN_IOMUXC_NAND_RE_B_PDM_BIT_STREAM1 0x130 0x398 0x538 0x3 0x7 +#define MX8MN_IOMUXC_NAND_RE_B_GPIO3_IO15 0x130 0x398 0x000 0x5 0x0 +#define MX8MN_IOMUXC_NAND_RE_B_CORESIGHT_TRACE13 0x130 0x398 0x000 0x6 0x0 +#define MX8MN_IOMUXC_NAND_READY_B_RAWNAND_READY_B 0x134 0x39C 0x000 0x0 0x0 +#define MX8MN_IOMUXC_NAND_READY_B_USDHC3_RESET_B 0x134 0x39C 0x000 0x2 0x0 +#define MX8MN_IOMUXC_NAND_READY_B_PDM_BIT_STREAM3 0x134 0x39C 0x540 0x3 0x6 +#define MX8MN_IOMUXC_NAND_READY_B_I2C3_SCL 0x134 0x39C 0x588 0x4 0x3 +#define MX8MN_IOMUXC_NAND_READY_B_GPIO3_IO16 0x134 0x39C 0x000 0x5 0x0 +#define MX8MN_IOMUXC_NAND_READY_B_CORESIGHT_TRACE14 0x134 0x39C 0x000 0x6 0x0 +#define MX8MN_IOMUXC_NAND_WE_B_RAWNAND_WE_B 0x138 0x3A0 0x000 0x0 0x0 +#define MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK 0x138 0x3A0 0x5A0 0x2 0x0 +#define MX8MN_IOMUXC_NAND_WE_B_I2C3_SDA 0x138 0x3A0 0x5BC 0x4 0x3 +#define MX8MN_IOMUXC_NAND_WE_B_GPIO3_IO17 0x138 0x3A0 0x000 0x5 0x0 +#define MX8MN_IOMUXC_NAND_WE_B_CORESIGHT_TRACE15 0x138 0x3A0 0x000 0x6 0x0 +#define MX8MN_IOMUXC_NAND_WP_B_RAWNAND_WP_B 0x13C 0x3A4 0x000 0x0 0x0 +#define MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD 0x13C 0x3A4 0x5DC 0x2 0x0 +#define MX8MN_IOMUXC_NAND_WP_B_I2C4_SDA 0x13C 0x3A4 0x58C 0x4 0x4 +#define MX8MN_IOMUXC_NAND_WP_B_GPIO3_IO18 0x13C 0x3A4 0x000 0x5 0x0 +#define MX8MN_IOMUXC_NAND_WP_B_CORESIGHT_EVENTO 0x13C 0x3A4 0x000 0x6 0x0 +#define MX8MN_IOMUXC_SAI5_RXFS_SAI5_RX_SYNC 0x140 0x3A8 0x4E4 0x0 0x0 +#define MX8MN_IOMUXC_SAI5_RXFS_GPIO3_IO19 0x140 0x3A8 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SAI5_RXC_SAI5_RX_BCLK 0x144 0x3AC 0x4D0 0x0 0x0 +#define MX8MN_IOMUXC_SAI5_RXC_PDM_CLK 0x144 0x3AC 0x000 0x4 0x0 +#define MX8MN_IOMUXC_SAI5_RXC_GPIO3_IO20 0x144 0x3AC 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SAI5_RXD0_SAI5_RX_DATA0 0x148 0x3B0 0x4D4 0x0 0x0 +#define MX8MN_IOMUXC_SAI5_RXD0_PDM_BIT_STREAM0 0x148 0x3B0 0x534 0x4 0x0 +#define MX8MN_IOMUXC_SAI5_RXD0_GPIO3_IO21 0x148 0x3B0 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SAI5_RXD1_SAI5_RX_DATA1 0x14C 0x3B4 0x4D8 0x0 0x0 +#define MX8MN_IOMUXC_SAI5_RXD1_SAI5_TX_SYNC 0x14C 0x3B4 0x4EC 0x3 0x0 +#define MX8MN_IOMUXC_SAI5_RXD1_PDM_BIT_STREAM1 0x14C 0x3B4 0x538 0x4 0x0 +#define MX8MN_IOMUXC_SAI5_RXD1_GPIO3_IO22 0x14C 0x3B4 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SAI5_RXD2_SAI5_RX_DATA2 0x150 0x3B8 0x4DC 0x0 0x0 +#define MX8MN_IOMUXC_SAI5_RXD2_SAI5_TX_BCLK 0x150 0x3B8 0x4E8 0x3 0x0 +#define MX8MN_IOMUXC_SAI5_RXD2_PDM_BIT_STREAM2 0x150 0x3B8 0x53C 0x4 0x0 +#define MX8MN_IOMUXC_SAI5_RXD2_GPIO3_IO23 0x150 0x3B8 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SAI5_RXD3_SAI5_RX_DATA3 0x154 0x3BC 0x4E0 0x0 0x0 +#define MX8MN_IOMUXC_SAI5_RXD3_SAI5_TX_DATA0 0x154 0x3BC 0x000 0x3 0x0 +#define MX8MN_IOMUXC_SAI5_RXD3_PDM_BIT_STREAM3 0x154 0x3BC 0x540 0x4 0x0 +#define MX8MN_IOMUXC_SAI5_RXD3_GPIO3_IO24 0x154 0x3BC 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SAI5_MCLK_SAI5_MCLK 0x158 0x3C0 0x594 0x0 0x0 +#define MX8MN_IOMUXC_SAI5_MCLK_GPIO3_IO25 0x158 0x3C0 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SAI2_RXFS_SAI2_RX_SYNC 0x1B0 0x418 0x000 0x0 0x0 +#define MX8MN_IOMUXC_SAI2_RXFS_SAI5_TX_SYNC 0x1B0 0x418 0x4EC 0x1 0x2 +#define MX8MN_IOMUXC_SAI2_RXFS_SAI5_TX_DATA1 0x1B0 0x418 0x000 0x2 0x0 +#define MX8MN_IOMUXC_SAI2_RXFS_SAI2_RX_DATA1 0x1B0 0x418 0x5AC 0x3 0x0 +#define MX8MN_IOMUXC_SAI2_RXFS_UART1_DCE_TX 0x1B0 0x418 0x000 0x4 0x0 +#define MX8MN_IOMUXC_SAI2_RXFS_UART1_DTE_RX 0x1B0 0x418 0x4F4 0x4 0x2 +#define MX8MN_IOMUXC_SAI2_RXFS_GPIO4_IO21 0x1B0 0x418 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SAI2_RXFS_PDM_BIT_STREAM2 0x1B0 0x418 0x53C 0x6 0x7 +#define MX8MN_IOMUXC_SAI2_RXC_SAI2_RX_BCLK 0x1B4 0x41C 0x000 0x0 0x0 +#define MX8MN_IOMUXC_SAI2_RXC_SAI5_TX_BCLK 0x1B4 0x41C 0x4E8 0x1 0x2 +#define MX8MN_IOMUXC_SAI2_RXC_UART1_DCE_RX 0x1B4 0x41C 0x4F4 0x4 0x3 +#define MX8MN_IOMUXC_SAI2_RXC_UART1_DTE_TX 0x1B4 0x41C 0x000 0x4 0x0 +#define MX8MN_IOMUXC_SAI2_RXC_GPIO4_IO22 0x1B4 0x41C 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SAI2_RXC_PDM_BIT_STREAM1 0x1B4 0x41C 0x538 0x6 0x8 +#define MX8MN_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0 0x1B8 0x420 0x000 0x0 0x0 +#define MX8MN_IOMUXC_SAI2_RXD0_SAI5_TX_DATA0 0x1B8 0x420 0x000 0x1 0x0 +#define MX8MN_IOMUXC_SAI2_RXD0_SAI2_TX_DATA1 0x1B8 0x420 0x000 0x3 0x0 +#define MX8MN_IOMUXC_SAI2_RXD0_UART1_DCE_RTS_B 0x1B8 0x420 0x4F0 0x4 0x2 +#define MX8MN_IOMUXC_SAI2_RXD0_UART1_DTE_CTS_B 0x1B8 0x420 0x000 0x4 0x0 +#define MX8MN_IOMUXC_SAI2_RXD0_GPIO4_IO23 0x1B8 0x420 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SAI2_RXD0_PDM_BIT_STREAM3 0x1B8 0x420 0x540 0x6 0x7 +#define MX8MN_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC 0x1BC 0x424 0x000 0x0 0x0 +#define MX8MN_IOMUXC_SAI2_TXFS_SAI5_TX_DATA1 0x1BC 0x424 0x000 0x1 0x0 +#define MX8MN_IOMUXC_SAI2_TXFS_SAI2_TX_DATA1 0x1BC 0x424 0x000 0x3 0x0 +#define MX8MN_IOMUXC_SAI2_TXFS_UART1_DCE_CTS_B 0x1BC 0x424 0x000 0x4 0x0 +#define MX8MN_IOMUXC_SAI2_TXFS_UART1_DTE_RTS_B 0x1BC 0x424 0x4F0 0x4 0x3 +#define MX8MN_IOMUXC_SAI2_TXFS_GPIO4_IO24 0x1BC 0x424 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SAI2_TXFS_PDM_BIT_STREAM2 0x1BC 0x424 0x53C 0x6 0x8 +#define MX8MN_IOMUXC_SAI2_TXC_SAI2_TX_BCLK 0x1C0 0x428 0x000 0x0 0x0 +#define MX8MN_IOMUXC_SAI2_TXC_SAI5_TX_DATA2 0x1C0 0x428 0x000 0x1 0x0 +#define MX8MN_IOMUXC_SAI2_TXC_GPIO4_IO25 0x1C0 0x428 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SAI2_TXC_PDM_BIT_STREAM1 0x1C0 0x428 0x538 0x6 0x9 +#define MX8MN_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0 0x1C4 0x42C 0x000 0x0 0x0 +#define MX8MN_IOMUXC_SAI2_TXD0_SAI5_TX_DATA3 0x1C4 0x42C 0x000 0x1 0x0 +#define MX8MN_IOMUXC_SAI2_TXD0_GPIO4_IO26 0x1C4 0x42C 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SAI2_TXD0_CCMSRCGPCMIX_BOOT_MODE4 0x1C4 0x42C 0x540 0x6 0x8 +#define MX8MN_IOMUXC_SAI2_MCLK_SAI2_MCLK 0x1C8 0x430 0x000 0x0 0x0 +#define MX8MN_IOMUXC_SAI2_MCLK_SAI5_MCLK 0x1C8 0x430 0x594 0x1 0x2 +#define MX8MN_IOMUXC_SAI2_MCLK_GPIO4_IO27 0x1C8 0x430 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SAI2_MCLK_SAI3_MCLK 0x1C8 0x430 0x5C0 0x6 0x1 +#define MX8MN_IOMUXC_SAI3_RXFS_SAI3_RX_SYNC 0x1CC 0x434 0x000 0x0 0x0 +#define MX8MN_IOMUXC_SAI3_RXFS_GPT1_CAPTURE1 0x1CC 0x434 0x5F0 0x1 0x0 +#define MX8MN_IOMUXC_SAI3_RXFS_SAI5_RX_SYNC 0x1CC 0x434 0x4E4 0x2 0x2 +#define MX8MN_IOMUXC_SAI3_RXFS_SAI3_RX_DATA1 0x1CC 0x434 0x000 0x3 0x0 +#define MX8MN_IOMUXC_SAI3_RXFS_SPDIF1_IN 0x1CC 0x434 0x5CC 0x4 0x3 +#define MX8MN_IOMUXC_SAI3_RXFS_GPIO4_IO28 0x1CC 0x434 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SAI3_RXFS_PDM_BIT_STREAM0 0x1CC 0x434 0x534 0x6 0x5 +#define MX8MN_IOMUXC_SAI3_RXC_SAI3_RX_BCLK 0x1D0 0x438 0x000 0x0 0x0 +#define MX8MN_IOMUXC_SAI3_RXC_GPT1_CLK 0x1D0 0x438 0x5E8 0x1 0x0 +#define MX8MN_IOMUXC_SAI3_RXC_SAI5_RX_BCLK 0x1D0 0x438 0x4D0 0x2 0x2 +#define MX8MN_IOMUXC_SAI3_RXC_SAI2_RX_DATA1 0x1D0 0x438 0x5AC 0x3 0x2 +#define MX8MN_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B 0x1D0 0x438 0x000 0x4 0x0 +#define MX8MN_IOMUXC_SAI3_RXC_UART2_DTE_RTS_B 0x1D0 0x438 0x4F8 0x4 0x2 +#define MX8MN_IOMUXC_SAI3_RXC_GPIO4_IO29 0x1D0 0x438 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SAI3_RXC_PDM_CLK 0x1D0 0x438 0x000 0x6 0x0 +#define MX8MN_IOMUXC_SAI3_RXD_SAI3_RX_DATA0 0x1D4 0x43C 0x000 0x0 0x0 +#define MX8MN_IOMUXC_SAI3_RXD_GPT1_COMPARE1 0x1D4 0x43C 0x000 0x1 0x0 +#define MX8MN_IOMUXC_SAI3_RXD_SAI5_RX_DATA0 0x1D4 0x43C 0x4D4 0x2 0x2 +#define MX8MN_IOMUXC_SAI3_RXD_SAI3_TX_DATA1 0x1D4 0x43C 0x000 0x3 0x0 +#define MX8MN_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B 0x1D4 0x43C 0x4F8 0x4 0x3 +#define MX8MN_IOMUXC_SAI3_RXD_UART2_DTE_CTS_B 0x1D4 0x43C 0x000 0x4 0x0 +#define MX8MN_IOMUXC_SAI3_RXD_GPIO4_IO30 0x1D4 0x43C 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SAI3_RXD_PDM_BIT_STREAM1 0x1D4 0x43C 0x538 0x6 0x10 +#define MX8MN_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0x1D8 0x440 0x000 0x0 0x0 +#define MX8MN_IOMUXC_SAI3_TXFS_GPT1_CAPTURE2 0x1D8 0x440 0x5EC 0x1 0x0 +#define MX8MN_IOMUXC_SAI3_TXFS_SAI5_RX_DATA1 0x1D8 0x440 0x4D8 0x2 0x1 +#define MX8MN_IOMUXC_SAI3_TXFS_SAI3_TX_DATA1 0x1D8 0x440 0x000 0x3 0x0 +#define MX8MN_IOMUXC_SAI3_TXFS_UART2_DCE_RX 0x1D8 0x440 0x4FC 0x4 0x2 +#define MX8MN_IOMUXC_SAI3_TXFS_UART2_DTE_TX 0x1D8 0x440 0x000 0x4 0x0 +#define MX8MN_IOMUXC_SAI3_TXFS_GPIO4_IO31 0x1D8 0x440 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SAI3_TXFS_PDM_BIT_STREAM3 0x1D8 0x440 0x540 0x6 0x9 +#define MX8MN_IOMUXC_SAI3_TXC_SAI3_TX_BCLK 0x1DC 0x444 0x000 0x0 0x0 +#define MX8MN_IOMUXC_SAI3_TXC_GPT1_COMPARE2 0x1DC 0x444 0x000 0x1 0x0 +#define MX8MN_IOMUXC_SAI3_TXC_SAI5_RX_DATA2 0x1DC 0x444 0x4DC 0x2 0x1 +#define MX8MN_IOMUXC_SAI3_TXC_SAI2_TX_DATA1 0x1DC 0x444 0x000 0x3 0x0 +#define MX8MN_IOMUXC_SAI3_TXC_UART2_DCE_TX 0x1DC 0x444 0x000 0x4 0x0 +#define MX8MN_IOMUXC_SAI3_TXC_UART2_DTE_RX 0x1DC 0x444 0x4FC 0x4 0x3 +#define MX8MN_IOMUXC_SAI3_TXC_GPIO5_IO0 0x1DC 0x444 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SAI3_TXC_PDM_BIT_STREAM2 0x1DC 0x444 0x53C 0x6 0x9 +#define MX8MN_IOMUXC_SAI3_TXD_SAI3_TX_DATA0 0x1E0 0x448 0x000 0x0 0x0 +#define MX8MN_IOMUXC_SAI3_TXD_GPT1_COMPARE3 0x1E0 0x448 0x000 0x1 0x0 +#define MX8MN_IOMUXC_SAI3_TXD_SAI5_RX_DATA3 0x1E0 0x448 0x4E0 0x2 0x1 +#define MX8MN_IOMUXC_SAI3_TXD_SPDIF1_EXT_CLK 0x1E0 0x448 0x568 0x4 0x2 +#define MX8MN_IOMUXC_SAI3_TXD_GPIO5_IO1 0x1E0 0x448 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SAI3_TXD_CCMSRCGPCMIX_BOOT_MODE5 0x1E0 0x448 0x000 0x6 0x0 +#define MX8MN_IOMUXC_SAI3_MCLK_SAI3_MCLK 0x1E4 0x44C 0x5C0 0x0 0x0 +#define MX8MN_IOMUXC_SAI3_MCLK_PWM4_OUT 0x1E4 0x44C 0x000 0x1 0x0 +#define MX8MN_IOMUXC_SAI3_MCLK_SAI5_MCLK 0x1E4 0x44C 0x594 0x2 0x3 +#define MX8MN_IOMUXC_SAI3_MCLK_SPDIF1_OUT 0x1E4 0x44C 0x000 0x4 0x0 +#define MX8MN_IOMUXC_SAI3_MCLK_GPIO5_IO2 0x1E4 0x44C 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SAI3_MCLK_SPDIF1_IN 0x1E4 0x44C 0x5CC 0x6 0x4 +#define MX8MN_IOMUXC_SPDIF_TX_SPDIF1_OUT 0x1E8 0x450 0x000 0x0 0x0 +#define MX8MN_IOMUXC_SPDIF_TX_PWM3_OUT 0x1E8 0x450 0x000 0x1 0x0 +#define MX8MN_IOMUXC_SPDIF_TX_GPIO5_IO3 0x1E8 0x450 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SPDIF_RX_SPDIF1_IN 0x1EC 0x454 0x5CC 0x0 0x0 +#define MX8MN_IOMUXC_SPDIF_RX_PWM2_OUT 0x1EC 0x454 0x000 0x1 0x0 +#define MX8MN_IOMUXC_SPDIF_RX_GPIO5_IO4 0x1EC 0x454 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SPDIF_EXT_CLK_SPDIF1_EXT_CLK 0x1F0 0x458 0x568 0x0 0x0 +#define MX8MN_IOMUXC_SPDIF_EXT_CLK_PWM1_OUT 0x1F0 0x458 0x000 0x1 0x0 +#define MX8MN_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5 0x1F0 0x458 0x000 0x5 0x0 +#define MX8MN_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK 0x1F4 0x45C 0x5D8 0x0 0x0 +#define MX8MN_IOMUXC_ECSPI1_SCLK_UART3_DCE_RX 0x1F4 0x45C 0x504 0x1 0x0 +#define MX8MN_IOMUXC_ECSPI1_SCLK_UART3_DTE_TX 0x1F4 0x45C 0x000 0x1 0x0 +#define MX8MN_IOMUXC_ECSPI1_SCLK_I2C1_SCL 0x1F4 0x45C 0x55C 0x2 0x2 +#define MX8MN_IOMUXC_ECSPI1_SCLK_SAI5_RX_SYNC 0x1F4 0x45C 0x4DC 0x3 0x2 +#define MX8MN_IOMUXC_ECSPI1_SCLK_GPIO5_IO6 0x1F4 0x45C 0x000 0x5 0x0 +#define MX8MN_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI 0x1F8 0x460 0x5A8 0x0 0x0 +#define MX8MN_IOMUXC_ECSPI1_MOSI_UART3_DCE_TX 0x1F8 0x460 0x000 0x1 0x0 +#define MX8MN_IOMUXC_ECSPI1_MOSI_UART3_DTE_RX 0x1F8 0x460 0x504 0x1 0x1 +#define MX8MN_IOMUXC_ECSPI1_MOSI_I2C1_SDA 0x1F8 0x460 0x56C 0x2 0x2 +#define MX8MN_IOMUXC_ECSPI1_MOSI_SAI5_RX_BCLK 0x1F8 0x460 0x4D0 0x3 0x3 +#define MX8MN_IOMUXC_ECSPI1_MOSI_GPIO5_IO7 0x1F8 0x460 0x000 0x5 0x0 +#define MX8MN_IOMUXC_ECSPI1_MISO_ECSPI1_MISO 0x1FC 0x464 0x5C4 0x0 0x0 +#define MX8MN_IOMUXC_ECSPI1_MISO_UART3_DCE_CTS_B 0x1FC 0x464 0x000 0x1 0x0 +#define MX8MN_IOMUXC_ECSPI1_MISO_UART3_DTE_RTS_B 0x1FC 0x464 0x500 0x1 0x0 +#define MX8MN_IOMUXC_ECSPI1_MISO_I2C2_SCL 0x1FC 0x464 0x5D0 0x2 0x2 +#define MX8MN_IOMUXC_ECSPI1_MISO_SAI5_RX_DATA0 0x1FC 0x464 0x4D4 0x3 0x3 +#define MX8MN_IOMUXC_ECSPI1_MISO_GPIO5_IO8 0x1FC 0x464 0x000 0x5 0x0 +#define MX8MN_IOMUXC_ECSPI1_SS0_ECSPI1_SS0 0x200 0x468 0x564 0x0 0x0 +#define MX8MN_IOMUXC_ECSPI1_SS0_UART3_DCE_RTS_B 0x200 0x468 0x500 0x1 0x1 +#define MX8MN_IOMUXC_ECSPI1_SS0_UART3_DTE_CTS_B 0x200 0x468 0x000 0x1 0x0 +#define MX8MN_IOMUXC_ECSPI1_SS0_I2C2_SDA 0x200 0x468 0x560 0x2 0x2 +#define MX8MN_IOMUXC_ECSPI1_SS0_SAI5_RX_DATA1 0x200 0x468 0x4D8 0x3 0x2 +#define MX8MN_IOMUXC_ECSPI1_SS0_SAI5_TX_SYNC 0x200 0x468 0x4EC 0x4 0x3 +#define MX8MN_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x200 0x468 0x000 0x5 0x0 +#define MX8MN_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0x204 0x46C 0x580 0x0 0x0 +#define MX8MN_IOMUXC_ECSPI2_SCLK_UART4_DCE_RX 0x204 0x46C 0x50C 0x1 0x0 +#define MX8MN_IOMUXC_ECSPI2_SCLK_UART4_DTE_TX 0x204 0x46C 0x000 0x1 0x0 +#define MX8MN_IOMUXC_ECSPI2_SCLK_I2C3_SCL 0x204 0x46C 0x588 0x2 0x4 +#define MX8MN_IOMUXC_ECSPI2_SCLK_SAI5_RX_DATA2 0x204 0x46C 0x000 0x3 0x0 +#define MX8MN_IOMUXC_ECSPI2_SCLK_SAI5_TX_BCLK 0x204 0x46C 0x4E8 0x4 0x3 +#define MX8MN_IOMUXC_ECSPI2_SCLK_GPIO5_IO10 0x204 0x46C 0x000 0x5 0x0 +#define MX8MN_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0x208 0x470 0x590 0x0 0x0 +#define MX8MN_IOMUXC_ECSPI2_MOSI_UART4_DCE_TX 0x208 0x470 0x000 0x1 0x0 +#define MX8MN_IOMUXC_ECSPI2_MOSI_UART4_DTE_RX 0x208 0x470 0x50C 0x1 0x1 +#define MX8MN_IOMUXC_ECSPI2_MOSI_I2C3_SDA 0x208 0x470 0x5BC 0x2 0x4 +#define MX8MN_IOMUXC_ECSPI2_MOSI_SAI5_RX_DATA3 0x208 0x470 0x4E0 0x3 0x2 +#define MX8MN_IOMUXC_ECSPI2_MOSI_SAI5_TX_DATA0 0x208 0x470 0x000 0x4 0x0 +#define MX8MN_IOMUXC_ECSPI2_MOSI_GPIO5_IO11 0x208 0x470 0x000 0x5 0x0 +#define MX8MN_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0x20C 0x474 0x578 0x0 0x0 +#define MX8MN_IOMUXC_ECSPI2_MISO_UART4_DCE_CTS_B 0x20C 0x474 0x000 0x1 0x0 +#define MX8MN_IOMUXC_ECSPI2_MISO_UART4_DTE_RTS_B 0x20C 0x474 0x508 0x1 0x0 +#define MX8MN_IOMUXC_ECSPI2_MISO_I2C4_SCL 0x20C 0x474 0x5D4 0x2 0x3 +#define MX8MN_IOMUXC_ECSPI2_MISO_SAI5_MCLK 0x20C 0x474 0x594 0x3 0x4 +#define MX8MN_IOMUXC_ECSPI2_MISO_GPIO5_IO12 0x20C 0x474 0x000 0x5 0x0 +#define MX8MN_IOMUXC_ECSPI2_SS0_ECSPI2_SS0 0x210 0x478 0x570 0x0 0x0 +#define MX8MN_IOMUXC_ECSPI2_SS0_UART4_DCE_RTS_B 0x210 0x478 0x508 0x1 0x1 +#define MX8MN_IOMUXC_ECSPI2_SS0_UART4_DTE_CTS_B 0x210 0x478 0x000 0x1 0x0 +#define MX8MN_IOMUXC_ECSPI2_SS0_I2C4_SDA 0x210 0x478 0x58C 0x2 0x5 +#define MX8MN_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0x210 0x478 0x000 0x5 0x0 +#define MX8MN_IOMUXC_I2C1_SCL_I2C1_SCL 0x214 0x47C 0x55C 0x0 0x0 +#define MX8MN_IOMUXC_I2C1_SCL_ENET1_MDC 0x214 0x47C 0x000 0x1 0x0 +#define MX8MN_IOMUXC_I2C1_SCL_ECSPI1_SCLK 0x214 0x47C 0x5D8 0x3 0x1 +#define MX8MN_IOMUXC_I2C1_SCL_GPIO5_IO14 0x214 0x47C 0x000 0x5 0x0 +#define MX8MN_IOMUXC_I2C1_SDA_I2C1_SDA 0x218 0x480 0x56C 0x0 0x0 +#define MX8MN_IOMUXC_I2C1_SDA_ENET1_MDIO 0x218 0x480 0x4C0 0x1 0x2 +#define MX8MN_IOMUXC_I2C1_SDA_ECSPI1_MOSI 0x218 0x480 0x5A8 0x3 0x1 +#define MX8MN_IOMUXC_I2C1_SDA_GPIO5_IO15 0x218 0x480 0x000 0x5 0x0 +#define MX8MN_IOMUXC_I2C2_SCL_I2C2_SCL 0x21C 0x484 0x5D0 0x0 0x0 +#define MX8MN_IOMUXC_I2C2_SCL_ENET1_1588_EVENT1_IN 0x21C 0x484 0x000 0x1 0x0 +#define MX8MN_IOMUXC_I2C2_SCL_USDHC3_CD_B 0x21C 0x484 0x598 0x2 0x1 +#define MX8MN_IOMUXC_I2C2_SCL_ECSPI1_MISO 0x21C 0x484 0x5C4 0x3 0x1 +#define MX8MN_IOMUXC_I2C2_SCL_GPIO5_IO16 0x21C 0x484 0x000 0x5 0x0 +#define MX8MN_IOMUXC_I2C2_SDA_I2C2_SDA 0x220 0x488 0x560 0x0 0x0 +#define MX8MN_IOMUXC_I2C2_SDA_ENET1_1588_EVENT1_OUT 0x220 0x488 0x000 0x1 0x0 +#define MX8MN_IOMUXC_I2C2_SDA_USDHC3_WP 0x220 0x488 0x5B8 0x2 0x1 +#define MX8MN_IOMUXC_I2C2_SDA_ECSPI1_SS0 0x220 0x488 0x564 0x3 0x1 +#define MX8MN_IOMUXC_I2C2_SDA_GPIO5_IO17 0x220 0x488 0x000 0x5 0x0 +#define MX8MN_IOMUXC_I2C3_SCL_I2C3_SCL 0x224 0x48C 0x588 0x0 0x0 +#define MX8MN_IOMUXC_I2C3_SCL_PWM4_OUT 0x224 0x48C 0x000 0x1 0x0 +#define MX8MN_IOMUXC_I2C3_SCL_GPT2_CLK 0x224 0x48C 0x000 0x2 0x0 +#define MX8MN_IOMUXC_I2C3_SCL_ECSPI2_SCLK 0x224 0x48C 0x580 0x3 0x2 +#define MX8MN_IOMUXC_I2C3_SCL_GPIO5_IO18 0x224 0x48C 0x000 0x5 0x0 +#define MX8MN_IOMUXC_I2C3_SDA_I2C3_SDA 0x228 0x490 0x5BC 0x0 0x0 +#define MX8MN_IOMUXC_I2C3_SDA_PWM3_OUT 0x228 0x490 0x000 0x1 0x0 +#define MX8MN_IOMUXC_I2C3_SDA_GPT3_CLK 0x228 0x490 0x000 0x2 0x0 +#define MX8MN_IOMUXC_I2C3_SDA_ECSPI2_MOSI 0x228 0x490 0x590 0x3 0x2 +#define MX8MN_IOMUXC_I2C3_SDA_GPIO5_IO19 0x228 0x490 0x000 0x5 0x0 +#define MX8MN_IOMUXC_I2C4_SCL_I2C4_SCL 0x22C 0x494 0x5D4 0x0 0x0 +#define MX8MN_IOMUXC_I2C4_SCL_PWM2_OUT 0x22C 0x494 0x000 0x1 0x0 +#define MX8MN_IOMUXC_I2C4_SCL_ECSPI2_MISO 0x22C 0x494 0x578 0x3 0x2 +#define MX8MN_IOMUXC_I2C4_SCL_GPIO5_IO20 0x22C 0x494 0x000 0x5 0x0 +#define MX8MN_IOMUXC_I2C4_SDA_I2C4_SDA 0x230 0x498 0x58C 0x0 0x0 +#define MX8MN_IOMUXC_I2C4_SDA_PWM1_OUT 0x230 0x498 0x000 0x1 0x0 +#define MX8MN_IOMUXC_I2C4_SDA_ECSPI2_SS0 0x230 0x498 0x570 0x3 0x1 +#define MX8MN_IOMUXC_I2C4_SDA_GPIO5_IO21 0x230 0x498 0x000 0x5 0x0 +#define MX8MN_IOMUXC_UART1_RXD_UART1_DCE_RX 0x234 0x49C 0x4F4 0x0 0x0 +#define MX8MN_IOMUXC_UART1_RXD_UART1_DTE_TX 0x234 0x49C 0x000 0x0 0x0 +#define MX8MN_IOMUXC_UART1_RXD_ECSPI3_SCLK 0x234 0x49C 0x000 0x1 0x0 +#define MX8MN_IOMUXC_UART1_RXD_GPIO5_IO22 0x234 0x49C 0x000 0x5 0x0 +#define MX8MN_IOMUXC_UART1_TXD_UART1_DCE_TX 0x238 0x4A0 0x000 0x0 0x0 +#define MX8MN_IOMUXC_UART1_TXD_UART1_DTE_RX 0x238 0x4A0 0x4F4 0x0 0x1 +#define MX8MN_IOMUXC_UART1_TXD_ECSPI3_MOSI 0x238 0x4A0 0x000 0x1 0x0 +#define MX8MN_IOMUXC_UART1_TXD_GPIO5_IO23 0x238 0x4A0 0x000 0x5 0x0 +#define MX8MN_IOMUXC_UART2_RXD_UART2_DCE_RX 0x23C 0x4A4 0x4FC 0x0 0x0 +#define MX8MN_IOMUXC_UART2_RXD_UART2_DTE_TX 0x23C 0x4A4 0x000 0x0 0x0 +#define MX8MN_IOMUXC_UART2_RXD_ECSPI3_MISO 0x23C 0x4A4 0x000 0x1 0x0 +#define MX8MN_IOMUXC_UART2_RXD_GPT1_COMPARE3 0x23C 0x4A4 0x000 0x3 0x0 +#define MX8MN_IOMUXC_UART2_RXD_GPIO5_IO24 0x23C 0x4A4 0x000 0x5 0x0 +#define MX8MN_IOMUXC_UART2_TXD_UART2_DCE_TX 0x240 0x4A8 0x000 0x0 0x0 +#define MX8MN_IOMUXC_UART2_TXD_UART2_DTE_RX 0x240 0x4A8 0x4FC 0x0 0x1 +#define MX8MN_IOMUXC_UART2_TXD_ECSPI3_SS0 0x240 0x4A8 0x000 0x1 0x0 +#define MX8MN_IOMUXC_UART2_TXD_GPT1_COMPARE2 0x240 0x4A8 0x000 0x3 0x0 +#define MX8MN_IOMUXC_UART2_TXD_GPIO5_IO25 0x240 0x4A8 0x000 0x5 0x0 +#define MX8MN_IOMUXC_UART3_RXD_UART3_DCE_RX 0x244 0x4AC 0x504 0x0 0x2 +#define MX8MN_IOMUXC_UART3_RXD_UART3_DTE_TX 0x244 0x4AC 0x000 0x0 0x0 +#define MX8MN_IOMUXC_UART3_RXD_UART1_DCE_CTS_B 0x244 0x4AC 0x000 0x1 0x0 +#define MX8MN_IOMUXC_UART3_RXD_UART1_DTE_RTS_B 0x244 0x4AC 0x4F0 0x1 0x0 +#define MX8MN_IOMUXC_UART3_RXD_USDHC3_RESET_B 0x244 0x4AC 0x000 0x2 0x0 +#define MX8MN_IOMUXC_UART3_RXD_GPT1_CAPTURE2 0x244 0x4AC 0x5EC 0x3 0x1 +#define MX8MN_IOMUXC_UART3_RXD_GPIO5_IO26 0x244 0x4AC 0x000 0x5 0x0 +#define MX8MN_IOMUXC_UART3_TXD_UART3_DCE_TX 0x248 0x4B0 0x000 0x0 0x0 +#define MX8MN_IOMUXC_UART3_TXD_UART3_DTE_RX 0x248 0x4B0 0x504 0x0 0x3 +#define MX8MN_IOMUXC_UART3_TXD_UART1_DCE_RTS_B 0x248 0x4B0 0x4F0 0x1 0x1 +#define MX8MN_IOMUXC_UART3_TXD_UART1_DTE_CTS_B 0x248 0x4B0 0x000 0x1 0x0 +#define MX8MN_IOMUXC_UART3_TXD_USDHC3_VSELECT 0x248 0x4B0 0x000 0x2 0x0 +#define MX8MN_IOMUXC_UART3_TXD_GPT1_CLK 0x248 0x4B0 0x5E8 0x3 0x1 +#define MX8MN_IOMUXC_UART3_TXD_GPIO5_IO27 0x248 0x4B0 0x000 0x5 0x0 +#define MX8MN_IOMUXC_UART4_RXD_UART4_DCE_RX 0x24C 0x4B4 0x50C 0x0 0x2 +#define MX8MN_IOMUXC_UART4_RXD_UART4_DTE_TX 0x24C 0x4B4 0x000 0x0 0x0 +#define MX8MN_IOMUXC_UART4_RXD_UART2_DCE_CTS_B 0x24C 0x4B4 0x000 0x1 0x0 +#define MX8MN_IOMUXC_UART4_RXD_UART2_DTE_RTS_B 0x24C 0x4B4 0x4F8 0x1 0x0 +#define MX8MN_IOMUXC_UART4_RXD_GPT1_COMPARE1 0x24C 0x4B4 0x000 0x3 0x0 +#define MX8MN_IOMUXC_UART4_RXD_GPIO5_IO28 0x24C 0x4B4 0x000 0x5 0x0 +#define MX8MN_IOMUXC_UART4_TXD_UART4_DCE_TX 0x250 0x4B8 0x000 0x0 0x0 +#define MX8MN_IOMUXC_UART4_TXD_UART4_DTE_RX 0x250 0x4B8 0x50C 0x0 0x3 +#define MX8MN_IOMUXC_UART4_TXD_UART2_DCE_RTS_B 0x250 0x4B8 0x4F8 0x1 0x1 +#define MX8MN_IOMUXC_UART4_TXD_UART2_DTE_CTS_B 0x250 0x4B8 0x000 0x1 0x0 +#define MX8MN_IOMUXC_UART4_TXD_GPT1_CAPTURE1 0x250 0x4B8 0x5F0 0x3 0x1 +#define MX8MN_IOMUXC_UART4_TXD_GPIO5_IO29 0x250 0x4B8 0x000 0x5 0x0 + +#endif /* __DTS_IMX8MN_PINFUNC_H */ diff --git a/dts/src/arm64/freescale/imx8mq-evk.dts b/dts/src/arm64/freescale/imx8mq-evk.dts index b2038be8bb..e3df9b8cd9 100644 --- a/dts/src/arm64/freescale/imx8mq-evk.dts +++ b/dts/src/arm64/freescale/imx8mq-evk.dts @@ -242,6 +242,10 @@ power-supply = <&sw1a_reg>; }; +&snvs_pwrkey { + status = "okay"; +}; + &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; diff --git a/dts/src/arm64/freescale/imx8mq-librem5-devkit.dts b/dts/src/arm64/freescale/imx8mq-librem5-devkit.dts new file mode 100644 index 0000000000..5179e22f51 --- /dev/null +++ b/dts/src/arm64/freescale/imx8mq-librem5-devkit.dts @@ -0,0 +1,809 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2018-2019 Purism SPC + */ + +/dts-v1/; + +#include "dt-bindings/input/input.h" +#include "dt-bindings/pwm/pwm.h" +#include "dt-bindings/usb/pd.h" +#include "imx8mq.dtsi" + +/ { + model = "Purism Librem 5 devkit"; + compatible = "purism,librem5-devkit", "fsl,imx8mq"; + + backlight_dsi: backlight-dsi { + compatible = "pwm-backlight"; + /* 200 Hz for the PAM2841 */ + pwms = <&pwm1 0 5000000>; + brightness-levels = <0 100>; + num-interpolated-steps = <100>; + /* Default brightness level (index into the array defined by */ + /* the "brightness-levels" property) */ + default-brightness-level = <0>; + power-supply = <®_22v4_p>; + }; + + chosen { + stdout-path = &uart1; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; + + btn1 { + label = "VOL_UP"; + gpios = <&gpio4 21 GPIO_ACTIVE_LOW>; + wakeup-source; + linux,code = <KEY_VOLUMEUP>; + }; + + btn2 { + label = "VOL_DOWN"; + gpios = <&gpio4 22 GPIO_ACTIVE_LOW>; + wakeup-source; + linux,code = <KEY_VOLUMEDOWN>; + }; + + hp-det { + label = "HP_DET"; + gpios = <&gpio3 20 GPIO_ACTIVE_LOW>; + wakeup-source; + linux,code = <KEY_HP>; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; + + led1 { + label = "LED 1"; + gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; + + pmic_osc: clock-pmic { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "pmic_osc"; + }; + + reg_1v8_p: regulator-1v8-p { + compatible = "regulator-fixed"; + regulator-name = "1v8_p"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <®_pwr_en>; + }; + + reg_2v8_p: regulator-2v8-p { + compatible = "regulator-fixed"; + regulator-name = "2v8_p"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + vin-supply = <®_pwr_en>; + }; + + reg_3v3_p: regulator-3v3-p { + compatible = "regulator-fixed"; + regulator-name = "3v3_p"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <®_pwr_en>; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + reg_5v_p: regulator-5v-p { + compatible = "regulator-fixed"; + regulator-name = "5v_p"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <®_pwr_en>; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + reg_22v4_p: regulator-22v4-p { + compatible = "regulator-fixed"; + regulator-name = "22v4_P"; + regulator-min-microvolt = <22400000>; + regulator-max-microvolt = <22400000>; + vin-supply = <®_pwr_en>; + }; + + reg_pwr_en: regulator-pwr-en { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwr_en>; + regulator-name = "PWR_EN"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 8 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + reg_usdhc2_vmmc: regulator-usdhc2-vmmc { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2_pwr>; + regulator-name = "VSD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + vibrator { + compatible = "gpio-vibrator"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_haptic>; + enable-gpios = <&gpio5 4 GPIO_ACTIVE_LOW>; + vcc-supply = <®_3v3_p>; + }; + + wifi_pwr_en: regulator-wifi-en { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wifi_pwr_en>; + regulator-name = "WIFI_EN"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 5 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; +}; + +&clk { + assigned-clocks = <&clk IMX8MQ_AUDIO_PLL1>, <&clk IMX8MQ_AUDIO_PLL2>; + assigned-clock-rates = <786432000>, <722534400>; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy0>; + fsl,magic-packet; + phy-supply = <®_3v3_p>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; + }; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + pmic: pmic@4b { + compatible = "rohm,bd71837"; + reg = <0x4b>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + clocks = <&pmic_osc>; + clock-names = "osc"; + clock-output-names = "pmic_clk"; + interrupt-parent = <&gpio1>; + interrupts = <3 GPIO_ACTIVE_LOW>; + interrupt-names = "irq"; + rohm,reset-snvs-powered; + + regulators { + buck1_reg: BUCK1 { + regulator-name = "buck1"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; + regulator-boot-on; + regulator-ramp-delay = <1250>; + rohm,dvs-run-voltage = <900000>; + rohm,dvs-idle-voltage = <850000>; + rohm,dvs-suspend-voltage = <800000>; + }; + + buck2_reg: BUCK2 { + regulator-name = "buck2"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; + regulator-boot-on; + regulator-ramp-delay = <1250>; + rohm,dvs-run-voltage = <1000000>; + rohm,dvs-idle-voltage = <900000>; + }; + + buck3_reg: BUCK3 { + regulator-name = "buck3"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; + regulator-boot-on; + rohm,dvs-run-voltage = <1000000>; + }; + + buck4_reg: BUCK4 { + regulator-name = "buck4"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; + rohm,dvs-run-voltage = <1000000>; + }; + + buck5_reg: BUCK5 { + regulator-name = "buck5"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1350000>; + regulator-boot-on; + }; + + buck6_reg: BUCK6 { + regulator-name = "buck6"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + + buck7_reg: BUCK7 { + regulator-name = "buck7"; + regulator-min-microvolt = <1605000>; + regulator-max-microvolt = <1995000>; + regulator-boot-on; + }; + + buck8_reg: BUCK8 { + regulator-name = "buck8"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-boot-on; + }; + + ldo1_reg: LDO1 { + regulator-name = "ldo1"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + /* leave on for snvs power button */ + regulator-always-on; + }; + + ldo2_reg: LDO2 { + regulator-name = "ldo2"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-boot-on; + /* leave on for snvs power button */ + regulator-always-on; + }; + + ldo3_reg: LDO3 { + regulator-name = "ldo3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + + ldo4_reg: LDO4 { + regulator-name = "ldo4"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + + ldo5_reg: LDO5 { + regulator-name = "ldo5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + ldo6_reg: LDO6 { + regulator-name = "ldo6"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + + ldo7_reg: LDO7 { + regulator-name = "ldo7"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + }; + }; + + typec_ptn5100: usb_typec@52 { + compatible = "nxp,ptn5110"; + reg = <0x52>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_typec>; + interrupt-parent = <&gpio3>; + interrupts = <1 IRQ_TYPE_LEVEL_LOW>; + + connector { + compatible = "usb-c-connector"; + label = "USB-C"; + data-role = "dual"; + power-role = "dual"; + try-power-role = "sink"; + source-pdos = <PDO_FIXED(5000, 2000, + PDO_FIXED_USB_COMM | + PDO_FIXED_DUAL_ROLE | + PDO_FIXED_DATA_SWAP )>; + sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM | + PDO_FIXED_DUAL_ROLE | + PDO_FIXED_DATA_SWAP ) + PDO_VAR(5000, 3000, 3000)>; + op-sink-microwatt = <10000000>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_con_hs: endpoint { + remote-endpoint = <&typec_hs>; + }; + }; + + port@1 { + reg = <1>; + + usb_con_ss: endpoint { + remote-endpoint = <&typec_ss>; + }; + }; + }; + }; + }; + + rtc@68 { + compatible = "microcrystal,rv4162"; + reg = <0x68>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rtc>; + interrupt-parent = <&gpio4>; + interrupts = <29 IRQ_TYPE_LEVEL_LOW>; + }; + + charger@6b { /* bq25896 */ + compatible = "ti,bq25890"; + reg = <0x6b>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_charger>; + interrupt-parent = <&gpio3>; + interrupts = <25 IRQ_TYPE_EDGE_FALLING>; + ti,battery-regulation-voltage = <4192000>; /* 4.192V */ + ti,charge-current = <1600000>; /* 1.6A */ + ti,termination-current = <66000>; /* 66mA */ + ti,precharge-current = <130000>; /* 130mA */ + ti,minimum-sys-voltage = <3000000>; /* 3V */ + ti,boost-voltage = <5000000>; /* 5V */ + ti,boost-max-current = <50000>; /* 50mA */ + }; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + magnetometer@1e { + compatible = "st,lsm9ds1-magn"; + reg = <0x1e>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_imu>; + interrupt-parent = <&gpio3>; + interrupts = <19 IRQ_TYPE_LEVEL_LOW>; + vdd-supply = <®_3v3_p>; + vddio-supply = <®_3v3_p>; + }; + + touchscreen@5d { + compatible = "goodix,gt5688"; + reg = <0x5d>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ts>; + interrupt-parent = <&gpio3>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; + irq-gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>; + touchscreen-size-x = <720>; + touchscreen-size-y = <1440>; + AVDD28-supply = <®_2v8_p>; + VDDIO-supply = <®_1v8_p>; + }; +}; + +&iomuxc { + pinctrl_bl: blgrp { + fsl,pins = < + MX8MQ_IOMUXC_GPIO1_IO01_PWM1_OUT 0x6 /* DSI_BL_PWM */ + >; + }; + + pinctrl_bt: btgrp { + fsl,pins = < + MX8MQ_IOMUXC_NAND_DATA05_GPIO3_IO11 0x16 /* nBT_DISABLE */ + MX8MQ_IOMUXC_NAND_DATA01_GPIO3_IO7 0x10 /* BT_HOST_WAKE */ + >; + }; + + pinctrl_charger: chargergrp { + fsl,pins = < + MX8MQ_IOMUXC_SAI5_MCLK_GPIO3_IO25 0x80 /* CHRG_nINT */ + >; + }; + + pinctrl_fec1: fec1grp { + fsl,pins = < + MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC 0x3 + MX8MQ_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3 + MX8MQ_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f + MX8MQ_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f + MX8MQ_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f + MX8MQ_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f + MX8MQ_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 + MX8MQ_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 + MX8MQ_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 + MX8MQ_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 + MX8MQ_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f + MX8MQ_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 + MX8MQ_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 + MX8MQ_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f + MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x19 + MX8MQ_IOMUXC_GPIO1_IO15_CCMSRCGPCMIX_CLKO2 0x1f + >; + }; + + pinctrl_ts: tsgrp { + fsl,pins = < + MX8MQ_IOMUXC_NAND_ALE_GPIO3_IO0 0x16 /* TOUCH INT */ + MX8MQ_IOMUXC_GPIO1_IO05_GPIO1_IO5 0x19 /* TOUCH RST */ + >; + }; + + pinctrl_gpio_leds: gpioledgrp { + fsl,pins = < + MX8MQ_IOMUXC_GPIO1_IO13_GPIO1_IO13 0x16 + >; + }; + + pinctrl_gpio_keys: gpiokeygrp { + fsl,pins = < + MX8MQ_IOMUXC_SAI2_RXFS_GPIO4_IO21 0x16 + MX8MQ_IOMUXC_SAI2_RXC_GPIO4_IO22 0x16 + MX8MQ_IOMUXC_SAI5_RXC_GPIO3_IO20 0x180 /* HP_DET */ + >; + }; + + pinctrl_haptic: hapticgrp { + fsl,pins = < + MX8MQ_IOMUXC_SPDIF_RX_GPIO5_IO4 0xc6 /* nHAPTIC */ + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL 0x4000001f + MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA 0x4000001f + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX8MQ_IOMUXC_I2C3_SCL_I2C3_SCL 0x4000001f + MX8MQ_IOMUXC_I2C3_SDA_I2C3_SDA 0x4000001f + >; + }; + + pinctrl_imu: imugrp { + fsl,pins = < + MX8MQ_IOMUXC_SAI5_RXFS_GPIO3_IO19 0x8 /* IMU_INT */ + >; + }; + + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX8MQ_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x80 /* PMIC intr */ + >; + }; + + pinctrl_pwr_en: pwrengrp { + fsl,pins = < + MX8MQ_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x06 + >; + }; + + pinctrl_rtc: rtcgrp { + fsl,pins = < + MX8MQ_IOMUXC_SAI3_RXC_GPIO4_IO29 0x80 /* RTC intr */ + >; + }; + + pinctrl_typec: typecgrp { + fsl,pins = < + MX8MQ_IOMUXC_NAND_DATA06_GPIO3_IO12 0x16 + MX8MQ_IOMUXC_NAND_CE0_B_GPIO3_IO1 0x80 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX 0x49 + MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX 0x49 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX8MQ_IOMUXC_UART2_TXD_UART2_DCE_TX 0x49 + MX8MQ_IOMUXC_UART2_RXD_UART2_DCE_RX 0x49 + MX8MQ_IOMUXC_UART4_RXD_UART2_DCE_CTS_B 0x49 + MX8MQ_IOMUXC_UART4_TXD_UART2_DCE_RTS_B 0x49 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX8MQ_IOMUXC_UART3_RXD_UART3_DCE_RX 0x49 + MX8MQ_IOMUXC_UART3_TXD_UART3_DCE_TX 0x49 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX8MQ_IOMUXC_ECSPI2_SCLK_UART4_DCE_RX 0x49 + MX8MQ_IOMUXC_ECSPI2_MOSI_UART4_DCE_TX 0x49 + MX8MQ_IOMUXC_ECSPI2_MISO_UART4_DCE_CTS_B 0x49 + MX8MQ_IOMUXC_ECSPI2_SS0_UART4_DCE_RTS_B 0x49 + MX8MQ_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K 0x49 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x83 + MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc3 + MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xc3 + MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xc3 + MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xc3 + MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xc3 + MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xc3 + MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xc3 + MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xc3 + MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xc3 + MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x83 + MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1grp100mhz { + fsl,pins = < + MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x8d + MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xcd + MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xcd + MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xcd + MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xcd + MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xcd + MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xcd + MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xcd + MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xcd + MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xcd + MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x8d + MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1grp200mhz { + fsl,pins = < + MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x9f + MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xdf + MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xdf + MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xdf + MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xdf + MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xdf + MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xdf + MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xdf + MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xdf + MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xdf + MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x9f + MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1 + >; + }; + + pinctrl_usdhc2_pwr: usdhc2grppwr { + fsl,pins = < + MX8MQ_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41 + >; + }; + + pinctrl_usdhc2_gpio: usdhc2grpgpio { + fsl,pins = < + MX8MQ_IOMUXC_SD2_WP_GPIO2_IO20 0x80 /* WIFI_WAKE */ + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x83 + MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc3 + MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xc3 + MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xc3 + MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xc3 + MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xc3 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2grp100mhz { + fsl,pins = < + MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x8d + MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xcd + MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xcd + MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xcd + MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xcd + MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xcd + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2grp200mhz { + fsl,pins = < + MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x9f + MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xcf + MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xcf + MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xcf + MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xcf + MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xcf + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 + >; + }; + + pinctrl_wifi_pwr_en: wifipwrengrp { + fsl,pins = < + MX8MQ_IOMUXC_NAND_CLE_GPIO3_IO5 0x06 + >; + }; + + pinctrl_wwan: wwangrp { + fsl,pins = < + MX8MQ_IOMUXC_NAND_CE3_B_GPIO3_IO4 0x09 /* nWWAN_DISABLE */ + MX8MQ_IOMUXC_NAND_DATA02_GPIO3_IO8 0x80 /* nWoWWAN */ + MX8MQ_IOMUXC_NAND_DATA03_GPIO3_IO9 0x19 /* WWAN_RESET */ + >; + }; +}; + +&pgc_gpu { + power-supply = <&buck3_reg>; +}; + +&pgc_vpu { + power-supply = <&buck4_reg>; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_bl>; + status = "okay"; +}; + +&snvs_pwrkey { + status = "okay"; +}; + +&uart1 { /* console */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart3 { /* GNSS */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +&uart4 { /* BT */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>, <&pinctrl_bt>; + uart-has-rtscts; + status = "okay"; +}; + +&usb3_phy0 { + status = "okay"; +}; + +&usb3_phy1 { + vbus-supply = <®_5v_p>; + status = "okay"; +}; + +&usb_dwc3_0 { + #address-cells = <1>; + #size-cells = <0>; + dr_mode = "otg"; + status = "okay"; + + port@0 { + reg = <0>; + + typec_hs: endpoint { + remote-endpoint = <&usb_con_hs>; + }; + }; + + port@1 { + reg = <1>; + + typec_ss: endpoint { + remote-endpoint = <&usb_con_ss>; + }; + }; +}; + +&usb_dwc3_1 { + dr_mode = "host"; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>; + bus-width = <4>; + vmmc-supply = <®_usdhc2_vmmc>; + power-supply = <&wifi_pwr_en>; + non-removable; + disable-wp; + cap-sdio-irq; + keep-power-in-suspend; + wakeup-source; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; diff --git a/dts/src/arm64/freescale/imx8mq.dtsi b/dts/src/arm64/freescale/imx8mq.dtsi index 6d635ba090..52aae341d0 100644 --- a/dts/src/arm64/freescale/imx8mq.dtsi +++ b/dts/src/arm64/freescale/imx8mq.dtsi @@ -8,6 +8,7 @@ #include <dt-bindings/power/imx8mq-power.h> #include <dt-bindings/reset/imx8mq-reset.h> #include <dt-bindings/gpio/gpio.h> +#include "dt-bindings/input/input.h" #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/thermal/thermal.h> #include "imx8mq-pinfunc.h" @@ -19,6 +20,11 @@ #size-cells = <2>; aliases { + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; + gpio4 = &gpio5; i2c0 = &i2c1; i2c1 = &i2c2; i2c2 = &i2c3; @@ -95,6 +101,8 @@ next-level-cache = <&A53_L2>; operating-points-v2 = <&a53_opp_table>; #cooling-cells = <2>; + nvmem-cells = <&cpu_speed_grade>; + nvmem-cell-names = "speed_grade"; }; A53_1: cpu@1 { @@ -145,14 +153,32 @@ opp-800000000 { opp-hz = /bits/ 64 <800000000>; opp-microvolt = <900000>; + /* Industrial only */ + opp-supported-hw = <0xf>, <0x4>; + clock-latency-ns = <150000>; + }; + + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <900000>; + /* Consumer only */ + opp-supported-hw = <0xe>, <0x3>; clock-latency-ns = <150000>; }; opp-1300000000 { opp-hz = /bits/ 64 <1300000000>; opp-microvolt = <1000000>; + opp-supported-hw = <0xc>, <0x7>; + clock-latency-ns = <150000>; + }; + + opp-1500000000 { + opp-hz = /bits/ 64 <1500000000>; + opp-microvolt = <1000000>; + /* Consumer only but rely on speed grading */ + opp-supported-hw = <0x8>, <0x7>; clock-latency-ns = <150000>; - opp-suspend; }; }; @@ -415,6 +441,10 @@ clocks = <&clk IMX8MQ_CLK_OCOTP_ROOT>; #address-cells = <1>; #size-cells = <1>; + + cpu_speed_grade: speed-grade@10 { + reg = <0x10 4>; + }; }; anatop: syscon@30360000 { @@ -433,8 +463,18 @@ offset = <0x34>; interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MQ_CLK_SNVS_ROOT>; + clock-names = "snvs-rtc"; }; + snvs_pwrkey: snvs-powerkey { + compatible = "fsl,sec-v4.0-pwrkey"; + regmap = <&snvs>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + linux,keycode = <KEY_POWER>; + wakeup-source; + status = "disabled"; + }; }; clk: clock-controller@30380000 { @@ -675,8 +715,7 @@ sai2: sai@308b0000 { #sound-dai-cells = <0>; - compatible = "fsl,imx8mq-sai", - "fsl,imx6sx-sai"; + compatible = "fsl,imx8mq-sai"; reg = <0x308b0000 0x10000>; interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX8MQ_CLK_SAI2_IPG>, @@ -815,6 +854,25 @@ }; }; + bus@32c00000 { /* AIPS4 */ + compatible = "fsl,imx8mq-aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x32c00000 0x32c00000 0x400000>; + + irqsteer: interrupt-controller@32e2d000 { + compatible = "fsl,imx8m-irqsteer", "fsl,imx-irqsteer"; + reg = <0x32e2d000 0x1000>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MQ_CLK_DISP_APB_ROOT>; + clock-names = "ipg"; + fsl,channel = <0>; + fsl,num-irqs = <64>; + interrupt-controller; + #interrupt-cells = <1>; + }; + }; + gpu: gpu@38000000 { compatible = "vivante,gc"; reg = <0x38000000 0x40000>; @@ -903,7 +961,6 @@ status = "disabled"; }; - pcie0: pcie@33800000 { compatible = "fsl,imx8mq-pcie"; reg = <0x33800000 0x400000>, diff --git a/dts/src/arm64/freescale/imx8qxp.dtsi b/dts/src/arm64/freescale/imx8qxp.dtsi index 0683ee2a48..05fa0b7f36 100644 --- a/dts/src/arm64/freescale/imx8qxp.dtsi +++ b/dts/src/arm64/freescale/imx8qxp.dtsi @@ -17,11 +17,19 @@ #size-cells = <2>; aliases { + gpio0 = &lsio_gpio0; + gpio1 = &lsio_gpio1; + gpio2 = &lsio_gpio2; + gpio3 = &lsio_gpio3; + gpio4 = &lsio_gpio4; + gpio5 = &lsio_gpio5; + gpio6 = &lsio_gpio6; + gpio7 = &lsio_gpio7; mmc0 = &usdhc1; mmc1 = &usdhc2; mmc2 = &usdhc3; - serial0 = &adma_lpuart0; mu1 = &lsio_mu1; + serial0 = &adma_lpuart0; }; cpus { @@ -141,6 +149,12 @@ compatible = "fsl,imx8qxp-iomuxc"; }; + ocotp: imx8qx-ocotp { + compatible = "fsl,imx8qxp-scu-ocotp"; + #address-cells = <1>; + #size-cells = <1>; + }; + pd: imx8qx-pd { compatible = "fsl,imx8qxp-scu-pd"; #power-domain-cells = <1>; @@ -149,6 +163,11 @@ rtc: rtc { compatible = "fsl,imx8qxp-sc-rtc"; }; + + watchdog { + compatible = "fsl,imx8qxp-sc-wdt", "fsl,imx-sc-wdt"; + timeout-sec = <60>; + }; }; timer { @@ -378,56 +397,25 @@ }; }; - lsio_subsys: bus@5d000000 { + ddr_subsyss: bus@5c000000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; - ranges = <0x5d000000 0x0 0x5d000000 0x1000000>; - - lsio_lpcg: clock-controller@5d400000 { - compatible = "fsl,imx8qxp-lpcg-lsio"; - reg = <0x5d400000 0x400000>; - #clock-cells = <1>; - }; + ranges = <0x5c000000 0x0 0x5c000000 0x1000000>; - lsio_mu0: mailbox@5d1b0000 { - compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; - reg = <0x5d1b0000 0x10000>; - interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>; - #mbox-cells = <2>; - status = "disabled"; - }; - - lsio_mu1: mailbox@5d1c0000 { - compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; - reg = <0x5d1c0000 0x10000>; - interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; - #mbox-cells = <2>; - }; - - lsio_mu2: mailbox@5d1d0000 { - compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; - reg = <0x5d1d0000 0x10000>; - interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>; - #mbox-cells = <2>; - status = "disabled"; - }; - - lsio_mu3: mailbox@5d1e0000 { - compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; - reg = <0x5d1e0000 0x10000>; - interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>; - #mbox-cells = <2>; - status = "disabled"; + ddr-pmu@5c020000 { + compatible = "fsl,imx8-ddr-pmu"; + reg = <0x5c020000 0x10000>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; }; + }; - lsio_mu4: mailbox@5d1f0000 { - compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; - reg = <0x5d1f0000 0x10000>; - interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>; - #mbox-cells = <2>; - status = "disabled"; - }; + lsio_subsys: bus@5d000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x5d000000 0x0 0x5d000000 0x1000000>; lsio_gpio0: gpio@5d080000 { compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio"; @@ -516,10 +504,58 @@ #interrupt-cells = <2>; power-domains = <&pd IMX_SC_R_GPIO_7>; }; - }; - watchdog { - compatible = "fsl,imx8qxp-sc-wdt", "fsl,imx-sc-wdt"; - timeout-sec = <60>; + lsio_mu0: mailbox@5d1b0000 { + compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; + reg = <0x5d1b0000 0x10000>; + interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <2>; + status = "disabled"; + }; + + lsio_mu1: mailbox@5d1c0000 { + compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; + reg = <0x5d1c0000 0x10000>; + interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <2>; + }; + + lsio_mu2: mailbox@5d1d0000 { + compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; + reg = <0x5d1d0000 0x10000>; + interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <2>; + status = "disabled"; + }; + + lsio_mu3: mailbox@5d1e0000 { + compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; + reg = <0x5d1e0000 0x10000>; + interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <2>; + status = "disabled"; + }; + + lsio_mu4: mailbox@5d1f0000 { + compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; + reg = <0x5d1f0000 0x10000>; + interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <2>; + status = "disabled"; + }; + + lsio_mu13: mailbox@5d280000 { + compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; + reg = <0x5d280000 0x10000>; + interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <2>; + power-domains = <&pd IMX_SC_R_MU_13A>; + }; + + lsio_lpcg: clock-controller@5d400000 { + compatible = "fsl,imx8qxp-lpcg-lsio"; + reg = <0x5d400000 0x400000>; + #clock-cells = <1>; + }; }; }; diff --git a/dts/src/arm64/hisilicon/hi3660-coresight.dtsi b/dts/src/arm64/hisilicon/hi3660-coresight.dtsi new file mode 100644 index 0000000000..d607f2f669 --- /dev/null +++ b/dts/src/arm64/hisilicon/hi3660-coresight.dtsi @@ -0,0 +1,456 @@ +// SPDX-License-Identifier: GPL-2.0 + +/* + * dtsi for Hisilicon Hi3660 Coresight + * + * Copyright (C) 2016-2018 Hisilicon Ltd. + * + * Author: Wanglai Shi <shiwanglai@hisilicon.com> + * + */ +/ { + soc { + /* A53 cluster internals */ + etm@ecc40000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0xecc40000 0 0x1000>; + clocks = <&crg_ctrl HI3660_PCLK>; + clock-names = "apb_pclk"; + cpu = <&cpu0>; + + out-ports { + port { + etm0_out: endpoint { + remote-endpoint = + <&cluster0_funnel_in0>; + }; + }; + }; + }; + + etm@ecd40000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0xecd40000 0 0x1000>; + clocks = <&crg_ctrl HI3660_PCLK>; + clock-names = "apb_pclk"; + cpu = <&cpu1>; + + out-ports { + port { + etm1_out: endpoint { + remote-endpoint = + <&cluster0_funnel_in1>; + }; + }; + }; + }; + + etm@ece40000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0xece40000 0 0x1000>; + clocks = <&crg_ctrl HI3660_PCLK>; + clock-names = "apb_pclk"; + cpu = <&cpu2>; + + out-ports { + port { + etm2_out: endpoint { + remote-endpoint = + <&cluster0_funnel_in2>; + }; + }; + }; + }; + + etm@ecf40000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0xecf40000 0 0x1000>; + clocks = <&crg_ctrl HI3660_PCLK>; + clock-names = "apb_pclk"; + cpu = <&cpu3>; + + out-ports { + port { + etm3_out: endpoint { + remote-endpoint = + <&cluster0_funnel_in3>; + }; + }; + }; + }; + + funnel@ec801000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0xec801000 0 0x1000>; + clocks = <&crg_ctrl HI3660_PCLK>; + clock-names = "apb_pclk"; + + out-ports { + port { + cluster0_funnel_out: endpoint { + remote-endpoint = + <&cluster0_etf_in>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + cluster0_funnel_in0: endpoint { + remote-endpoint = <&etm0_out>; + }; + }; + + port@1 { + reg = <1>; + cluster0_funnel_in1: endpoint { + remote-endpoint = <&etm1_out>; + }; + }; + + port@2 { + reg = <2>; + cluster0_funnel_in2: endpoint { + remote-endpoint = <&etm2_out>; + }; + }; + + port@3 { + reg = <3>; + cluster0_funnel_in3: endpoint { + remote-endpoint = <&etm3_out>; + }; + }; + }; + }; + + etf@ec802000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0 0xec802000 0 0x1000>; + clocks = <&crg_ctrl HI3660_PCLK>; + clock-names = "apb_pclk"; + + in-ports { + port { + cluster0_etf_in: endpoint { + remote-endpoint = + <&cluster0_funnel_out>; + }; + }; + }; + + out-ports { + port { + cluster0_etf_out: endpoint { + remote-endpoint = + <&combo_funnel_in0>; + }; + }; + }; + }; + + /* A73 cluster internals */ + etm@ed440000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0xed440000 0 0x1000>; + clocks = <&crg_ctrl HI3660_PCLK>; + clock-names = "apb_pclk"; + cpu = <&cpu4>; + + out-ports { + port { + etm4_out: endpoint { + remote-endpoint = + <&cluster1_funnel_in0>; + }; + }; + }; + }; + + etm@ed540000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0xed540000 0 0x1000>; + clocks = <&crg_ctrl HI3660_PCLK>; + clock-names = "apb_pclk"; + cpu = <&cpu5>; + + out-ports { + port { + etm5_out: endpoint { + remote-endpoint = + <&cluster1_funnel_in1>; + }; + }; + }; + }; + + etm@ed640000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0xed640000 0 0x1000>; + clocks = <&crg_ctrl HI3660_PCLK>; + clock-names = "apb_pclk"; + cpu = <&cpu6>; + + out-ports { + port { + etm6_out: endpoint { + remote-endpoint = + <&cluster1_funnel_in2>; + }; + }; + }; + }; + + etm@ed740000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0xed740000 0 0x1000>; + clocks = <&crg_ctrl HI3660_PCLK>; + clock-names = "apb_pclk"; + cpu = <&cpu7>; + + out-ports { + port { + etm7_out: endpoint { + remote-endpoint = + <&cluster1_funnel_in3>; + }; + }; + }; + }; + + funnel@ed001000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0xed001000 0 0x1000>; + clocks = <&crg_ctrl HI3660_PCLK>; + clock-names = "apb_pclk"; + out-ports { + port { + cluster1_funnel_out: endpoint { + remote-endpoint = + <&cluster1_etf_in>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + cluster1_funnel_in0: endpoint { + remote-endpoint = <&etm4_out>; + }; + }; + + port@1 { + reg = <1>; + cluster1_funnel_in1: endpoint { + remote-endpoint = <&etm5_out>; + }; + }; + + port@2 { + reg = <2>; + cluster1_funnel_in2: endpoint { + remote-endpoint = <&etm6_out>; + }; + }; + + port@3 { + reg = <3>; + cluster1_funnel_in3: endpoint { + remote-endpoint = <&etm7_out>; + }; + }; + }; + }; + + etf@ed002000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0 0xed002000 0 0x1000>; + clocks = <&crg_ctrl HI3660_PCLK>; + clock-names = "apb_pclk"; + + in-ports { + port { + cluster1_etf_in: endpoint { + remote-endpoint = + <&cluster1_funnel_out>; + }; + }; + }; + + out-ports { + port { + cluster1_etf_out: endpoint { + remote-endpoint = + <&combo_funnel_in1>; + }; + }; + }; + }; + + /* An invisible combo funnel between clusters and top funnel */ + funnel { + compatible = "arm,coresight-static-funnel"; + clocks = <&crg_ctrl HI3660_PCLK>; + clock-names = "apb_pclk"; + + out-ports { + port { + combo_funnel_out: endpoint { + remote-endpoint = + <&top_funnel_in>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + combo_funnel_in0: endpoint { + remote-endpoint = + <&cluster0_etf_out>; + }; + }; + + port@1 { + reg = <1>; + combo_funnel_in1: endpoint { + remote-endpoint = + <&cluster1_etf_out>; + }; + }; + }; + }; + + /* Top internals */ + funnel@ec031000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0xec031000 0 0x1000>; + clocks = <&crg_ctrl HI3660_PCLK>; + clock-names = "apb_pclk"; + + out-ports { + port { + top_funnel_out: endpoint { + remote-endpoint = + <&top_etf_in>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + top_funnel_in: endpoint { + remote-endpoint = + <&combo_funnel_out>; + }; + }; + }; + }; + + etf@ec036000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0 0xec036000 0 0x1000>; + clocks = <&crg_ctrl HI3660_PCLK>; + clock-names = "apb_pclk"; + + in-ports { + port { + top_etf_in: endpoint { + remote-endpoint = + <&top_funnel_out>; + }; + }; + }; + + out-ports { + port { + top_etf_out: endpoint { + remote-endpoint = + <&replicator_in>; + }; + }; + }; + }; + + replicator { + compatible = "arm,coresight-static-replicator"; + clocks = <&crg_ctrl HI3660_PCLK>; + clock-names = "apb_pclk"; + + in-ports { + port { + replicator_in: endpoint { + remote-endpoint = + <&top_etf_out>; + }; + }; + }; + + out-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + replicator0_out0: endpoint { + remote-endpoint = <&etr_in>; + }; + }; + + port@1 { + reg = <1>; + replicator0_out1: endpoint { + remote-endpoint = <&tpiu_in>; + }; + }; + }; + }; + + etr@ec033000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0 0xec033000 0 0x1000>; + clocks = <&crg_ctrl HI3660_PCLK>; + clock-names = "apb_pclk"; + + in-ports { + port { + etr_in: endpoint { + remote-endpoint = + <&replicator0_out0>; + }; + }; + }; + }; + + tpiu@ec032000 { + compatible = "arm,coresight-tpiu", "arm,primecell"; + reg = <0 0xec032000 0 0x1000>; + clocks = <&crg_ctrl HI3660_PCLK>; + clock-names = "apb_pclk"; + + in-ports { + port { + tpiu_in: endpoint { + remote-endpoint = + <&replicator0_out1>; + }; + }; + }; + }; + }; +}; diff --git a/dts/src/arm64/hisilicon/hi3660.dtsi b/dts/src/arm64/hisilicon/hi3660.dtsi index aa6a8ad31b..253cc345f1 100644 --- a/dts/src/arm64/hisilicon/hi3660.dtsi +++ b/dts/src/arm64/hisilicon/hi3660.dtsi @@ -1154,3 +1154,5 @@ }; }; }; + +#include "hi3660-coresight.dtsi" diff --git a/dts/src/arm64/hisilicon/hi6220-coresight.dtsi b/dts/src/arm64/hisilicon/hi6220-coresight.dtsi index 30f54b77c2..651771a73e 100644 --- a/dts/src/arm64/hisilicon/hi6220-coresight.dtsi +++ b/dts/src/arm64/hisilicon/hi6220-coresight.dtsi @@ -11,7 +11,7 @@ / { soc { funnel@f6401000 { - compatible = "arm,coresight-funnel", "arm,primecell"; + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0 0xf6401000 0 0x1000>; clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>; clock-names = "apb_pclk"; @@ -61,7 +61,7 @@ }; replicator { - compatible = "arm,coresight-replicator"; + compatible = "arm,coresight-static-replicator"; clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>; clock-names = "apb_pclk"; @@ -129,7 +129,7 @@ }; funnel@f6501000 { - compatible = "arm,coresight-funnel", "arm,primecell"; + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0 0xf6501000 0 0x1000>; clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>; clock-names = "apb_pclk"; diff --git a/dts/src/arm64/marvell/armada-3720-espressobin.dts b/dts/src/arm64/marvell/armada-3720-espressobin.dts index 6be019e188..fbcf03f86c 100644 --- a/dts/src/arm64/marvell/armada-3720-espressobin.dts +++ b/dts/src/arm64/marvell/armada-3720-espressobin.dts @@ -95,25 +95,9 @@ flash@0 { reg = <0>; - compatible = "winbond,w25q32dw", "jedec,spi-flash"; + compatible = "jedec,spi-nor"; spi-max-frequency = <104000000>; m25p,fast-read; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "uboot"; - reg = <0 0x180000>; - }; - - partition@180000 { - label = "ubootenv"; - reg = <0x180000 0x10000>; - }; - }; }; }; diff --git a/dts/src/arm64/marvell/armada-7040-db.dts b/dts/src/arm64/marvell/armada-7040-db.dts index d20d84ce7c..f34ee87a0f 100644 --- a/dts/src/arm64/marvell/armada-7040-db.dts +++ b/dts/src/arm64/marvell/armada-7040-db.dts @@ -28,6 +28,32 @@ ethernet2 = &cp0_eth2; }; + cp0_exp_usb3_0_current_regulator: gpio-regulator { + compatible = "regulator-gpio"; + regulator-name = "cp0-usb3-0-current-regulator"; + regulator-type = "current"; + regulator-min-microamp = <500000>; + regulator-max-microamp = <900000>; + gpios = <&expander0 4 GPIO_ACTIVE_HIGH>; + states = <500000 0x0 + 900000 0x1>; + enable-active-high; + gpios-states = <0>; + }; + + cp0_exp_usb3_1_current_regulator: gpio-regulator { + compatible = "regulator-gpio"; + regulator-name = "cp0-usb3-1-current-regulator"; + regulator-type = "current"; + regulator-min-microamp = <500000>; + regulator-max-microamp = <900000>; + gpios = <&expander0 5 GPIO_ACTIVE_HIGH>; + states = <500000 0x0 + 900000 0x1>; + enable-active-high; + gpios-states = <0>; + }; + cp0_reg_usb3_0_vbus: cp0-usb3-0-vbus { compatible = "regulator-fixed"; regulator-name = "usb3h0-vbus"; @@ -35,6 +61,7 @@ regulator-max-microvolt = <5000000>; enable-active-high; gpio = <&expander0 0 GPIO_ACTIVE_HIGH>; + vin-supply = <&cp0_exp_usb3_0_current_regulator>; }; cp0_reg_usb3_1_vbus: cp0-usb3-1-vbus { @@ -44,6 +71,7 @@ regulator-max-microvolt = <5000000>; enable-active-high; gpio = <&expander0 1 GPIO_ACTIVE_HIGH>; + vin-supply = <&cp0_exp_usb3_1_current_regulator>; }; cp0_usb3_0_phy: cp0-usb3-0-phy { diff --git a/dts/src/arm64/marvell/armada-8040-clearfog-gt-8k.dts b/dts/src/arm64/marvell/armada-8040-clearfog-gt-8k.dts index 9143aa13ce..f275d9420d 100644 --- a/dts/src/arm64/marvell/armada-8040-clearfog-gt-8k.dts +++ b/dts/src/arm64/marvell/armada-8040-clearfog-gt-8k.dts @@ -63,6 +63,7 @@ tx-disable-gpio = <&cp1_gpio1 29 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&cp0_sfp_present_pins &cp1_sfp_tx_disable_pins>; + maximum-power-milliwatt = <2000>; }; leds { diff --git a/dts/src/arm64/marvell/armada-8040-db.dts b/dts/src/arm64/marvell/armada-8040-db.dts index 9f4f939ab6..d6e9c014c2 100644 --- a/dts/src/arm64/marvell/armada-8040-db.dts +++ b/dts/src/arm64/marvell/armada-8040-db.dts @@ -27,6 +27,8 @@ ethernet1 = &cp0_eth2; ethernet2 = &cp1_eth0; ethernet3 = &cp1_eth1; + i2c1 = &cp0_i2c0; + i2c2 = &cp1_i2c0; }; cp0_reg_usb3_0_vbus: cp0-usb3-0-vbus { @@ -72,11 +74,6 @@ }; }; -&i2c0 { - status = "okay"; - clock-frequency = <100000>; -}; - &spi0 { status = "okay"; diff --git a/dts/src/arm64/marvell/armada-8040-mcbin.dtsi b/dts/src/arm64/marvell/armada-8040-mcbin.dtsi index 329f8ceeeb..205071b45a 100644 --- a/dts/src/arm64/marvell/armada-8040-mcbin.dtsi +++ b/dts/src/arm64/marvell/armada-8040-mcbin.dtsi @@ -184,6 +184,8 @@ num-lanes = <4>; num-viewport = <8>; reset-gpios = <&cp0_gpio2 20 GPIO_ACTIVE_LOW>; + ranges = <0x81000000 0x0 0xf9010000 0x0 0xf9010000 0x0 0x10000 + 0x82000000 0x0 0xc0000000 0x0 0xc0000000 0x0 0x20000000>; status = "okay"; }; diff --git a/dts/src/arm64/marvell/armada-ap806-dual.dtsi b/dts/src/arm64/marvell/armada-ap806-dual.dtsi index 861fd21922..9024a2d9db 100644 --- a/dts/src/arm64/marvell/armada-ap806-dual.dtsi +++ b/dts/src/arm64/marvell/armada-ap806-dual.dtsi @@ -20,12 +20,14 @@ compatible = "arm,cortex-a72"; reg = <0x000>; enable-method = "psci"; + #cooling-cells = <2>; }; cpu1: cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a72"; reg = <0x001>; enable-method = "psci"; + #cooling-cells = <2>; }; }; }; diff --git a/dts/src/arm64/marvell/armada-ap806-quad.dtsi b/dts/src/arm64/marvell/armada-ap806-quad.dtsi index 2baafe12eb..ea13ae78f5 100644 --- a/dts/src/arm64/marvell/armada-ap806-quad.dtsi +++ b/dts/src/arm64/marvell/armada-ap806-quad.dtsi @@ -20,24 +20,29 @@ compatible = "arm,cortex-a72"; reg = <0x000>; enable-method = "psci"; + #cooling-cells = <2>; }; cpu1: cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a72"; reg = <0x001>; enable-method = "psci"; + #cooling-cells = <2>; }; cpu2: cpu@100 { device_type = "cpu"; compatible = "arm,cortex-a72"; reg = <0x100>; enable-method = "psci"; + #cooling-cells = <2>; }; cpu3: cpu@101 { device_type = "cpu"; compatible = "arm,cortex-a72"; reg = <0x101>; enable-method = "psci"; + #cooling-cells = <2>; }; }; + }; diff --git a/dts/src/arm64/marvell/armada-ap806.dtsi b/dts/src/arm64/marvell/armada-ap806.dtsi index 91dad7e4ee..96228f93b2 100644 --- a/dts/src/arm64/marvell/armada-ap806.dtsi +++ b/dts/src/arm64/marvell/armada-ap806.dtsi @@ -297,8 +297,6 @@ * * Only one thermal zone per AP/CP may trigger interrupts at a time, the * first one that will have a critical trip point will be chosen. - * - * The cooling maps are always empty as there are no cooling devices. */ thermal-zones { ap_thermal_ic: ap-thermal-ic { @@ -318,44 +316,136 @@ cooling-maps { }; }; - ap_thermal_cpu1: ap-thermal-cpu1 { + ap_thermal_cpu0: ap-thermal-cpu0 { polling-delay-passive = <1000>; polling-delay = <1000>; thermal-sensors = <&ap_thermal 1>; - trips { }; - cooling-maps { }; + trips { + cpu0_hot: cpu0-hot { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu0_emerg: cpu0-emerg { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + }; + + cooling-maps { + map0_hot: map0-hot { + trip = <&cpu0_hot>; + cooling-device = <&cpu0 1 2>, + <&cpu1 1 2>; + }; + map0_emerg: map0-ermerg { + trip = <&cpu0_emerg>; + cooling-device = <&cpu0 3 3>, + <&cpu1 3 3>; + }; + }; }; - ap_thermal_cpu2: ap-thermal-cpu2 { + ap_thermal_cpu1: ap-thermal-cpu1 { polling-delay-passive = <1000>; polling-delay = <1000>; thermal-sensors = <&ap_thermal 2>; - trips { }; - cooling-maps { }; + trips { + cpu1_hot: cpu1-hot { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu1_emerg: cpu1-emerg { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + }; + + cooling-maps { + map1_hot: map1-hot { + trip = <&cpu1_hot>; + cooling-device = <&cpu0 1 2>, + <&cpu1 1 2>; + }; + map1_emerg: map1-emerg { + trip = <&cpu1_emerg>; + cooling-device = <&cpu0 3 3>, + <&cpu1 3 3>; + }; + }; }; - ap_thermal_cpu3: ap-thermal-cpu3 { + ap_thermal_cpu2: ap-thermal-cpu2 { polling-delay-passive = <1000>; polling-delay = <1000>; thermal-sensors = <&ap_thermal 3>; - trips { }; - cooling-maps { }; + trips { + cpu2_hot: cpu2-hot { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu2_emerg: cpu2-emerg { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + }; + + cooling-maps { + map2_hot: map2-hot { + trip = <&cpu2_hot>; + cooling-device = <&cpu2 1 2>, + <&cpu3 1 2>; + }; + map2_emerg: map2-emerg { + trip = <&cpu2_emerg>; + cooling-device = <&cpu2 3 3>, + <&cpu3 3 3>; + }; + }; }; - ap_thermal_cpu4: ap-thermal-cpu4 { + ap_thermal_cpu3: ap-thermal-cpu3 { polling-delay-passive = <1000>; polling-delay = <1000>; thermal-sensors = <&ap_thermal 4>; - trips { }; - cooling-maps { }; + trips { + cpu3_hot: cpu3-hot { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu3_emerg: cpu3-emerg { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + }; + + cooling-maps { + map3_hot: map3-bhot { + trip = <&cpu3_hot>; + cooling-device = <&cpu2 1 2>, + <&cpu3 1 2>; + }; + map3_emerg: map3-emerg { + trip = <&cpu3_emerg>; + cooling-device = <&cpu2 3 3>, + <&cpu3 3 3>; + }; + }; }; }; }; diff --git a/dts/src/arm64/marvell/armada-cp110.dtsi b/dts/src/arm64/marvell/armada-cp110.dtsi index 4d6e4a097f..f71afb1de1 100644 --- a/dts/src/arm64/marvell/armada-cp110.dtsi +++ b/dts/src/arm64/marvell/armada-cp110.dtsi @@ -238,6 +238,7 @@ <85 IRQ_TYPE_LEVEL_HIGH>, <84 IRQ_TYPE_LEVEL_HIGH>, <83 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <2>; status = "disabled"; }; @@ -253,6 +254,7 @@ <81 IRQ_TYPE_LEVEL_HIGH>, <80 IRQ_TYPE_LEVEL_HIGH>, <79 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <2>; status = "disabled"; }; }; diff --git a/dts/src/arm64/mediatek/mt7622.dtsi b/dts/src/arm64/mediatek/mt7622.dtsi index 4b1f5ae710..d1e13d340e 100644 --- a/dts/src/arm64/mediatek/mt7622.dtsi +++ b/dts/src/arm64/mediatek/mt7622.dtsi @@ -929,7 +929,8 @@ sgmiisys: sgmiisys@1b128000 { compatible = "mediatek,mt7622-sgmiisys", "syscon"; - reg = <0 0x1b128000 0 0x1000>; + reg = <0 0x1b128000 0 0x3000>; #clock-cells = <1>; + mediatek,physpeed = "2500"; }; }; diff --git a/dts/src/arm64/mediatek/mt8183-evb.dts b/dts/src/arm64/mediatek/mt8183-evb.dts new file mode 100644 index 0000000000..d8e555cbb5 --- /dev/null +++ b/dts/src/arm64/mediatek/mt8183-evb.dts @@ -0,0 +1,140 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (c) 2018 MediaTek Inc. + * Author: Ben Ho <ben.ho@mediatek.com> + * Erin Lo <erin.lo@mediatek.com> + */ + +/dts-v1/; +#include "mt8183.dtsi" + +/ { + model = "MediaTek MT8183 evaluation board"; + compatible = "mediatek,mt8183-evb", "mediatek,mt8183"; + + aliases { + serial0 = &uart0; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0 0x40000000 0 0x80000000>; + }; + + chosen { + stdout-path = "serial0:921600n8"; + }; +}; + +&auxadc { + status = "okay"; +}; + +&pio { + spi_pins_0: spi0{ + pins_spi{ + pinmux = <PINMUX_GPIO85__FUNC_SPI0_MI>, + <PINMUX_GPIO86__FUNC_SPI0_CSB>, + <PINMUX_GPIO87__FUNC_SPI0_MO>, + <PINMUX_GPIO88__FUNC_SPI0_CLK>; + bias-disable; + }; + }; + + spi_pins_1: spi1{ + pins_spi{ + pinmux = <PINMUX_GPIO161__FUNC_SPI1_A_MI>, + <PINMUX_GPIO162__FUNC_SPI1_A_CSB>, + <PINMUX_GPIO163__FUNC_SPI1_A_MO>, + <PINMUX_GPIO164__FUNC_SPI1_A_CLK>; + bias-disable; + }; + }; + + spi_pins_2: spi2{ + pins_spi{ + pinmux = <PINMUX_GPIO0__FUNC_SPI2_CSB>, + <PINMUX_GPIO1__FUNC_SPI2_MO>, + <PINMUX_GPIO2__FUNC_SPI2_CLK>, + <PINMUX_GPIO94__FUNC_SPI2_MI>; + bias-disable; + }; + }; + + spi_pins_3: spi3{ + pins_spi{ + pinmux = <PINMUX_GPIO21__FUNC_SPI3_MI>, + <PINMUX_GPIO22__FUNC_SPI3_CSB>, + <PINMUX_GPIO23__FUNC_SPI3_MO>, + <PINMUX_GPIO24__FUNC_SPI3_CLK>; + bias-disable; + }; + }; + + spi_pins_4: spi4{ + pins_spi{ + pinmux = <PINMUX_GPIO17__FUNC_SPI4_MI>, + <PINMUX_GPIO18__FUNC_SPI4_CSB>, + <PINMUX_GPIO19__FUNC_SPI4_MO>, + <PINMUX_GPIO20__FUNC_SPI4_CLK>; + bias-disable; + }; + }; + + spi_pins_5: spi5{ + pins_spi{ + pinmux = <PINMUX_GPIO13__FUNC_SPI5_MI>, + <PINMUX_GPIO14__FUNC_SPI5_CSB>, + <PINMUX_GPIO15__FUNC_SPI5_MO>, + <PINMUX_GPIO16__FUNC_SPI5_CLK>; + bias-disable; + }; + }; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi_pins_0>; + mediatek,pad-select = <0>; + status = "okay"; +}; + +&spi1 { + pinctrl-names = "default"; + pinctrl-0 = <&spi_pins_1>; + mediatek,pad-select = <0>; + status = "okay"; +}; + +&spi2 { + pinctrl-names = "default"; + pinctrl-0 = <&spi_pins_2>; + mediatek,pad-select = <0>; + status = "okay"; +}; + +&spi3 { + pinctrl-names = "default"; + pinctrl-0 = <&spi_pins_3>; + mediatek,pad-select = <0>; + status = "okay"; +}; + +&spi4 { + pinctrl-names = "default"; + pinctrl-0 = <&spi_pins_4>; + mediatek,pad-select = <0>; + status = "okay"; +}; + +&spi5 { + pinctrl-names = "default"; + pinctrl-0 = <&spi_pins_5>; + mediatek,pad-select = <0>; + status = "okay"; + +}; + +&uart0 { + status = "okay"; +}; diff --git a/dts/src/arm64/mediatek/mt8183.dtsi b/dts/src/arm64/mediatek/mt8183.dtsi new file mode 100644 index 0000000000..c2749c4631 --- /dev/null +++ b/dts/src/arm64/mediatek/mt8183.dtsi @@ -0,0 +1,447 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (c) 2018 MediaTek Inc. + * Author: Ben Ho <ben.ho@mediatek.com> + * Erin Lo <erin.lo@mediatek.com> + */ + +#include <dt-bindings/clock/mt8183-clk.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include "mt8183-pinfunc.h" + +/ { + compatible = "mediatek,mt8183"; + interrupt-parent = <&sysirq>; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu0>; + }; + core1 { + cpu = <&cpu1>; + }; + core2 { + cpu = <&cpu2>; + }; + core3 { + cpu = <&cpu3>; + }; + }; + + cluster1 { + core0 { + cpu = <&cpu4>; + }; + core1 { + cpu = <&cpu5>; + }; + core2 { + cpu = <&cpu6>; + }; + core3 { + cpu = <&cpu7>; + }; + }; + }; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x000>; + enable-method = "psci"; + capacity-dmips-mhz = <741>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x001>; + enable-method = "psci"; + capacity-dmips-mhz = <741>; + }; + + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x002>; + enable-method = "psci"; + capacity-dmips-mhz = <741>; + }; + + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x003>; + enable-method = "psci"; + capacity-dmips-mhz = <741>; + }; + + cpu4: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a73"; + reg = <0x100>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + }; + + cpu5: cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a73"; + reg = <0x101>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + }; + + cpu6: cpu@102 { + device_type = "cpu"; + compatible = "arm,cortex-a73"; + reg = <0x102>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + }; + + cpu7: cpu@103 { + device_type = "cpu"; + compatible = "arm,cortex-a73"; + reg = <0x103>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + }; + }; + + pmu-a53 { + compatible = "arm,cortex-a53-pmu"; + interrupt-parent = <&gic>; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW &ppi_cluster0>; + }; + + pmu-a73 { + compatible = "arm,cortex-a73-pmu"; + interrupt-parent = <&gic>; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW &ppi_cluster1>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + clk26m: oscillator { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <26000000>; + clock-output-names = "clk26m"; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupt-parent = <&gic>; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW 0>, + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW 0>, + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW 0>, + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW 0>; + }; + + soc { + #address-cells = <2>; + #size-cells = <2>; + compatible = "simple-bus"; + ranges; + + soc_data: soc_data@8000000 { + compatible = "mediatek,mt8183-efuse", + "mediatek,efuse"; + reg = <0 0x08000000 0 0x0010>; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + }; + + gic: interrupt-controller@c000000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <4>; + interrupt-parent = <&gic>; + interrupt-controller; + reg = <0 0x0c000000 0 0x40000>, /* GICD */ + <0 0x0c100000 0 0x200000>, /* GICR */ + <0 0x0c400000 0 0x2000>, /* GICC */ + <0 0x0c410000 0 0x1000>, /* GICH */ + <0 0x0c420000 0 0x2000>; /* GICV */ + + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>; + ppi-partitions { + ppi_cluster0: interrupt-partition-0 { + affinity = <&cpu0 &cpu1 &cpu2 &cpu3>; + }; + ppi_cluster1: interrupt-partition-1 { + affinity = <&cpu4 &cpu5 &cpu6 &cpu7>; + }; + }; + }; + + mcucfg: syscon@c530000 { + compatible = "mediatek,mt8183-mcucfg", "syscon"; + reg = <0 0x0c530000 0 0x1000>; + #clock-cells = <1>; + }; + + sysirq: interrupt-controller@c530a80 { + compatible = "mediatek,mt8183-sysirq", + "mediatek,mt6577-sysirq"; + interrupt-controller; + #interrupt-cells = <3>; + interrupt-parent = <&gic>; + reg = <0 0x0c530a80 0 0x50>; + }; + + topckgen: syscon@10000000 { + compatible = "mediatek,mt8183-topckgen", "syscon"; + reg = <0 0x10000000 0 0x1000>; + #clock-cells = <1>; + }; + + infracfg: syscon@10001000 { + compatible = "mediatek,mt8183-infracfg", "syscon"; + reg = <0 0x10001000 0 0x1000>; + #clock-cells = <1>; + }; + + pio: pinctrl@10005000 { + compatible = "mediatek,mt8183-pinctrl"; + reg = <0 0x10005000 0 0x1000>, + <0 0x11f20000 0 0x1000>, + <0 0x11e80000 0 0x1000>, + <0 0x11e70000 0 0x1000>, + <0 0x11e90000 0 0x1000>, + <0 0x11d30000 0 0x1000>, + <0 0x11d20000 0 0x1000>, + <0 0x11c50000 0 0x1000>, + <0 0x11f30000 0 0x1000>, + <0 0x1000b000 0 0x1000>; + reg-names = "iocfg0", "iocfg1", "iocfg2", + "iocfg3", "iocfg4", "iocfg5", + "iocfg6", "iocfg7", "iocfg8", + "eint"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pio 0 0 192>; + interrupt-controller; + interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <2>; + }; + + apmixedsys: syscon@1000c000 { + compatible = "mediatek,mt8183-apmixedsys", "syscon"; + reg = <0 0x1000c000 0 0x1000>; + #clock-cells = <1>; + }; + + pwrap: pwrap@1000d000 { + compatible = "mediatek,mt8183-pwrap"; + reg = <0 0x1000d000 0 0x1000>; + reg-names = "pwrap"; + interrupts = <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&topckgen CLK_TOP_MUX_PMICSPI>, + <&infracfg CLK_INFRA_PMIC_AP>; + clock-names = "spi", "wrap"; + }; + + auxadc: auxadc@11001000 { + compatible = "mediatek,mt8183-auxadc", + "mediatek,mt8173-auxadc"; + reg = <0 0x11001000 0 0x1000>; + clocks = <&infracfg CLK_INFRA_AUXADC>; + clock-names = "main"; + #io-channel-cells = <1>; + status = "disabled"; + }; + + uart0: serial@11002000 { + compatible = "mediatek,mt8183-uart", + "mediatek,mt6577-uart"; + reg = <0 0x11002000 0 0x1000>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>; + clocks = <&clk26m>, <&infracfg CLK_INFRA_UART0>; + clock-names = "baud", "bus"; + status = "disabled"; + }; + + uart1: serial@11003000 { + compatible = "mediatek,mt8183-uart", + "mediatek,mt6577-uart"; + reg = <0 0x11003000 0 0x1000>; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_LOW>; + clocks = <&clk26m>, <&infracfg CLK_INFRA_UART1>; + clock-names = "baud", "bus"; + status = "disabled"; + }; + + uart2: serial@11004000 { + compatible = "mediatek,mt8183-uart", + "mediatek,mt6577-uart"; + reg = <0 0x11004000 0 0x1000>; + interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_LOW>; + clocks = <&clk26m>, <&infracfg CLK_INFRA_UART2>; + clock-names = "baud", "bus"; + status = "disabled"; + }; + + spi0: spi@1100a000 { + compatible = "mediatek,mt8183-spi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x1100a000 0 0x1000>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_SYSPLL_D5_D2>, + <&topckgen CLK_TOP_MUX_SPI>, + <&infracfg CLK_INFRA_SPI0>; + clock-names = "parent-clk", "sel-clk", "spi-clk"; + status = "disabled"; + }; + + spi1: spi@11010000 { + compatible = "mediatek,mt8183-spi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x11010000 0 0x1000>; + interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_SYSPLL_D5_D2>, + <&topckgen CLK_TOP_MUX_SPI>, + <&infracfg CLK_INFRA_SPI1>; + clock-names = "parent-clk", "sel-clk", "spi-clk"; + status = "disabled"; + }; + + spi2: spi@11012000 { + compatible = "mediatek,mt8183-spi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x11012000 0 0x1000>; + interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_SYSPLL_D5_D2>, + <&topckgen CLK_TOP_MUX_SPI>, + <&infracfg CLK_INFRA_SPI2>; + clock-names = "parent-clk", "sel-clk", "spi-clk"; + status = "disabled"; + }; + + spi3: spi@11013000 { + compatible = "mediatek,mt8183-spi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x11013000 0 0x1000>; + interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_SYSPLL_D5_D2>, + <&topckgen CLK_TOP_MUX_SPI>, + <&infracfg CLK_INFRA_SPI3>; + clock-names = "parent-clk", "sel-clk", "spi-clk"; + status = "disabled"; + }; + + spi4: spi@11018000 { + compatible = "mediatek,mt8183-spi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x11018000 0 0x1000>; + interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_SYSPLL_D5_D2>, + <&topckgen CLK_TOP_MUX_SPI>, + <&infracfg CLK_INFRA_SPI4>; + clock-names = "parent-clk", "sel-clk", "spi-clk"; + status = "disabled"; + }; + + spi5: spi@11019000 { + compatible = "mediatek,mt8183-spi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x11019000 0 0x1000>; + interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_SYSPLL_D5_D2>, + <&topckgen CLK_TOP_MUX_SPI>, + <&infracfg CLK_INFRA_SPI5>; + clock-names = "parent-clk", "sel-clk", "spi-clk"; + status = "disabled"; + }; + + audiosys: syscon@11220000 { + compatible = "mediatek,mt8183-audiosys", "syscon"; + reg = <0 0x11220000 0 0x1000>; + #clock-cells = <1>; + }; + + efuse: efuse@11f10000 { + compatible = "mediatek,mt8183-efuse", + "mediatek,efuse"; + reg = <0 0x11f10000 0 0x1000>; + }; + + mfgcfg: syscon@13000000 { + compatible = "mediatek,mt8183-mfgcfg", "syscon"; + reg = <0 0x13000000 0 0x1000>; + #clock-cells = <1>; + }; + + mmsys: syscon@14000000 { + compatible = "mediatek,mt8183-mmsys", "syscon"; + reg = <0 0x14000000 0 0x1000>; + #clock-cells = <1>; + }; + + imgsys: syscon@15020000 { + compatible = "mediatek,mt8183-imgsys", "syscon"; + reg = <0 0x15020000 0 0x1000>; + #clock-cells = <1>; + }; + + vdecsys: syscon@16000000 { + compatible = "mediatek,mt8183-vdecsys", "syscon"; + reg = <0 0x16000000 0 0x1000>; + #clock-cells = <1>; + }; + + vencsys: syscon@17000000 { + compatible = "mediatek,mt8183-vencsys", "syscon"; + reg = <0 0x17000000 0 0x1000>; + #clock-cells = <1>; + }; + + ipu_conn: syscon@19000000 { + compatible = "mediatek,mt8183-ipu_conn", "syscon"; + reg = <0 0x19000000 0 0x1000>; + #clock-cells = <1>; + }; + + ipu_adl: syscon@19010000 { + compatible = "mediatek,mt8183-ipu_adl", "syscon"; + reg = <0 0x19010000 0 0x1000>; + #clock-cells = <1>; + }; + + ipu_core0: syscon@19180000 { + compatible = "mediatek,mt8183-ipu_core0", "syscon"; + reg = <0 0x19180000 0 0x1000>; + #clock-cells = <1>; + }; + + ipu_core1: syscon@19280000 { + compatible = "mediatek,mt8183-ipu_core1", "syscon"; + reg = <0 0x19280000 0 0x1000>; + #clock-cells = <1>; + }; + + camsys: syscon@1a000000 { + compatible = "mediatek,mt8183-camsys", "syscon"; + reg = <0 0x1a000000 0 0x1000>; + #clock-cells = <1>; + }; + }; +}; diff --git a/dts/src/arm64/nvidia/tegra186-p2771-0000.dts b/dts/src/arm64/nvidia/tegra186-p2771-0000.dts index 14d7fea82d..bdace01561 100644 --- a/dts/src/arm64/nvidia/tegra186-p2771-0000.dts +++ b/dts/src/arm64/nvidia/tegra186-p2771-0000.dts @@ -7,18 +7,70 @@ #include "tegra186-p3310.dtsi" / { - model = "NVIDIA Tegra186 P2771-0000 Development Board"; + model = "NVIDIA Jetson TX2 Developer Kit"; compatible = "nvidia,p2771-0000", "nvidia,tegra186"; + aconnect { + status = "okay"; + + dma-controller@2930000 { + status = "okay"; + }; + + interrupt-controller@2a40000 { + status = "okay"; + }; + }; + i2c@3160000 { power-monitor@42 { compatible = "ti,ina3221"; reg = <0x42>; + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + reg = <0x0>; + label = "VDD_MUX"; + shunt-resistor-micro-ohms = <20000>; + }; + + channel@1 { + reg = <0x1>; + label = "VDD_5V0_IO_SYS"; + shunt-resistor-micro-ohms = <5000>; + }; + + channel@2 { + reg = <0x2>; + label = "VDD_3V3_SYS"; + shunt-resistor-micro-ohms = <10000>; + }; }; power-monitor@43 { compatible = "ti,ina3221"; reg = <0x43>; + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + reg = <0x0>; + label = "VDD_3V3_IO_SLP"; + shunt-resistor-micro-ohms = <10000>; + }; + + channel@1 { + reg = <0x1>; + label = "VDD_1V8_IO"; + shunt-resistor-micro-ohms = <10000>; + }; + + channel@2 { + reg = <0x2>; + label = "VDD_M2_IN"; + shunt-resistor-micro-ohms = <10000>; + }; }; exp1: gpio@74 { @@ -31,6 +83,8 @@ #gpio-cells = <2>; gpio-controller; + + vcc-supply = <&vdd_3v3_sys>; }; exp2: gpio@77 { @@ -43,6 +97,8 @@ #gpio-cells = <2>; gpio-controller; + + vcc-supply = <&vdd_1v8>; }; }; @@ -145,6 +201,19 @@ phy-names = "usb2-0", "usb2-1", "usb3-0"; }; + i2c@c250000 { + /* carrier board ID EEPROM */ + eeprom@57 { + compatible = "atmel,24c02"; + reg = <0x57>; + + address-bits = <8>; + page-size = <8>; + size = <256>; + read-only; + }; + }; + pcie@10003000 { status = "okay"; @@ -278,7 +347,7 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&gpio TEGRA_MAIN_GPIO(L, 4) GPIO_ACTIVE_HIGH>; + gpio = <&gpio TEGRA186_MAIN_GPIO(L, 4) GPIO_ACTIVE_HIGH>; enable-active-high; vin-supply = <&vdd_5v0_sys>; @@ -292,7 +361,7 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&gpio TEGRA_MAIN_GPIO(L, 5) GPIO_ACTIVE_HIGH>; + gpio = <&gpio TEGRA186_MAIN_GPIO(L, 5) GPIO_ACTIVE_HIGH>; enable-active-high; vin-supply = <&vdd_5v0_sys>; diff --git a/dts/src/arm64/nvidia/tegra186-p3310.dtsi b/dts/src/arm64/nvidia/tegra186-p3310.dtsi index 64686b033c..5e18acf5cf 100644 --- a/dts/src/arm64/nvidia/tegra186-p3310.dtsi +++ b/dts/src/arm64/nvidia/tegra186-p3310.dtsi @@ -4,7 +4,7 @@ #include <dt-bindings/mfd/max77620.h> / { - model = "NVIDIA Tegra186 P3310 Processor Module"; + model = "NVIDIA Jetson TX2"; compatible = "nvidia,p3310", "nvidia,tegra186"; aliases { @@ -67,11 +67,51 @@ power-monitor@40 { compatible = "ti,ina3221"; reg = <0x40>; + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + reg = <0x0>; + label = "VDD_SYS_GPU"; + shunt-resistor-micro-ohms = <10000>; + }; + + channel@1 { + reg = <0x1>; + label = "VDD_SYS_SOC"; + shunt-resistor-micro-ohms = <10000>; + }; + + channel@2 { + reg = <0x2>; + label = "VDD_3V8_WIFI"; + shunt-resistor-micro-ohms = <10000>; + }; }; power-monitor@41 { compatible = "ti,ina3221"; reg = <0x41>; + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + reg = <0x0>; + label = "VDD_IN"; + shunt-resistor-micro-ohms = <5000>; + }; + + channel@1 { + reg = <0x1>; + label = "VDD_SYS_CPU"; + shunt-resistor-micro-ohms = <10000>; + }; + + channel@2 { + reg = <0x2>; + label = "VDD_5V0_DDR"; + shunt-resistor-micro-ohms = <10000>; + }; }; }; @@ -124,6 +164,17 @@ i2c@c250000 { status = "okay"; + + /* module ID EEPROM */ + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + + address-bits = <8>; + page-size = <8>; + size = <256>; + read-only; + }; }; rtc@c2a0000 { diff --git a/dts/src/arm64/nvidia/tegra186.dtsi b/dts/src/arm64/nvidia/tegra186.dtsi index 426ac0bdf6..47cd831fcf 100644 --- a/dts/src/arm64/nvidia/tegra186.dtsi +++ b/dts/src/arm64/nvidia/tegra186.dtsi @@ -70,6 +70,75 @@ snps,rxpbl = <8>; }; + aconnect { + compatible = "nvidia,tegra186-aconnect", + "nvidia,tegra210-aconnect"; + clocks = <&bpmp TEGRA186_CLK_APE>, + <&bpmp TEGRA186_CLK_APB2APE>; + clock-names = "ape", "apb2ape"; + power-domains = <&bpmp TEGRA186_POWER_DOMAIN_AUD>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x02900000 0x0 0x02900000 0x200000>; + status = "disabled"; + + dma-controller@2930000 { + compatible = "nvidia,tegra186-adma"; + reg = <0x02930000 0x20000>; + interrupt-parent = <&agic>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + clocks = <&bpmp TEGRA186_CLK_AHUB>; + clock-names = "d_audio"; + status = "disabled"; + }; + + agic: interrupt-controller@2a40000 { + compatible = "nvidia,tegra186-agic", + "nvidia,tegra210-agic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x02a41000 0x1000>, + <0x02a42000 0x2000>; + interrupts = <GIC_SPI 145 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + clocks = <&bpmp TEGRA186_CLK_APE>; + clock-names = "clk"; + status = "disabled"; + }; + }; + memory-controller@2c00000 { compatible = "nvidia,tegra186-mc"; reg = <0x0 0x02c00000 0x0 0xb0000>; @@ -173,6 +242,9 @@ clock-names = "div-clk"; resets = <&bpmp TEGRA186_RESET_I2C4>; reset-names = "i2c"; + pinctrl-names = "default", "idle"; + pinctrl-0 = <&state_dpaux1_i2c>; + pinctrl-1 = <&state_dpaux1_off>; status = "disabled"; }; @@ -201,6 +273,9 @@ clock-names = "div-clk"; resets = <&bpmp TEGRA186_RESET_I2C6>; reset-names = "i2c"; + pinctrl-names = "default", "idle"; + pinctrl-0 = <&state_dpaux_i2c>; + pinctrl-1 = <&state_dpaux_off>; status = "disabled"; }; @@ -1121,6 +1196,30 @@ }; }; + bpmp: bpmp { + compatible = "nvidia,tegra186-bpmp"; + iommus = <&smmu TEGRA186_SID_BPMP>; + mboxes = <&hsp_top0 TEGRA_HSP_MBOX_TYPE_DB + TEGRA_HSP_DB_MASTER_BPMP>; + shmem = <&cpu_bpmp_tx &cpu_bpmp_rx>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + + bpmp_i2c: i2c { + compatible = "nvidia,tegra186-bpmp-i2c"; + nvidia,bpmp-bus-id = <5>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + bpmp_thermal: thermal { + compatible = "nvidia,tegra186-bpmp-thermal"; + #thermal-sensor-cells = <1>; + }; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -1128,61 +1227,97 @@ cpu@0 { compatible = "nvidia,tegra186-denver"; device_type = "cpu"; + i-cache-size = <0x20000>; + i-cache-line-size = <64>; + i-cache-sets = <512>; + d-cache-size = <0x10000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&L2_DENVER>; reg = <0x000>; }; cpu@1 { compatible = "nvidia,tegra186-denver"; device_type = "cpu"; + i-cache-size = <0x20000>; + i-cache-line-size = <64>; + i-cache-sets = <512>; + d-cache-size = <0x10000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&L2_DENVER>; reg = <0x001>; }; cpu@2 { compatible = "arm,cortex-a57"; device_type = "cpu"; + i-cache-size = <0xC000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&L2_A57>; reg = <0x100>; }; cpu@3 { compatible = "arm,cortex-a57"; device_type = "cpu"; + i-cache-size = <0xC000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&L2_A57>; reg = <0x101>; }; cpu@4 { compatible = "arm,cortex-a57"; device_type = "cpu"; + i-cache-size = <0xC000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&L2_A57>; reg = <0x102>; }; cpu@5 { compatible = "arm,cortex-a57"; device_type = "cpu"; + i-cache-size = <0xC000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&L2_A57>; reg = <0x103>; }; - }; - bpmp: bpmp { - compatible = "nvidia,tegra186-bpmp"; - iommus = <&smmu TEGRA186_SID_BPMP>; - mboxes = <&hsp_top0 TEGRA_HSP_MBOX_TYPE_DB - TEGRA_HSP_DB_MASTER_BPMP>; - shmem = <&cpu_bpmp_tx &cpu_bpmp_rx>; - #clock-cells = <1>; - #reset-cells = <1>; - #power-domain-cells = <1>; - - bpmp_i2c: i2c { - compatible = "nvidia,tegra186-bpmp-i2c"; - nvidia,bpmp-bus-id = <5>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; + L2_DENVER: l2-cache0 { + compatible = "cache"; + cache-unified; + cache-level = <2>; + cache-size = <0x200000>; + cache-line-size = <64>; + cache-sets = <2048>; }; - bpmp_thermal: thermal { - compatible = "nvidia,tegra186-bpmp-thermal"; - #thermal-sensor-cells = <1>; + L2_A57: l2-cache1 { + compatible = "cache"; + cache-unified; + cache-level = <2>; + cache-size = <0x200000>; + cache-line-size = <64>; + cache-sets = <2048>; }; }; @@ -1294,5 +1429,6 @@ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; interrupt-parent = <&gic>; + always-on; }; }; diff --git a/dts/src/arm64/nvidia/tegra194-p2888.dtsi b/dts/src/arm64/nvidia/tegra194-p2888.dtsi index 0fd5bd29fb..62e07e1197 100644 --- a/dts/src/arm64/nvidia/tegra194-p2888.dtsi +++ b/dts/src/arm64/nvidia/tegra194-p2888.dtsi @@ -4,7 +4,7 @@ #include <dt-bindings/mfd/max77620.h> / { - model = "NVIDIA Tegra194 P2888 Processor Module"; + model = "NVIDIA Jetson AGX Xavier"; compatible = "nvidia,p2888", "nvidia,tegra194"; aliases { @@ -191,7 +191,7 @@ regulator-boot-on; }; - sd3 { + vdd_1v8ao: sd3 { regulator-name = "VDD_1V8AO"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; diff --git a/dts/src/arm64/nvidia/tegra194-p2972-0000.dts b/dts/src/arm64/nvidia/tegra194-p2972-0000.dts index 73801b48d1..23597d53c9 100644 --- a/dts/src/arm64/nvidia/tegra194-p2972-0000.dts +++ b/dts/src/arm64/nvidia/tegra194-p2972-0000.dts @@ -7,10 +7,22 @@ #include "tegra194-p2888.dtsi" / { - model = "NVIDIA Jetson AGX Xavier Development Kit"; + model = "NVIDIA Jetson AGX Xavier Developer Kit"; compatible = "nvidia,p2972-0000", "nvidia,tegra194"; cbb { + aconnect { + status = "okay"; + + dma-controller@2930000 { + status = "okay"; + }; + + interrupt-controller@2a40000 { + status = "okay"; + }; + }; + ddc: i2c@31c0000 { status = "okay"; }; @@ -52,6 +64,47 @@ }; }; + pcie@14100000 { + status = "okay"; + + vddio-pex-ctl-supply = <&vdd_1v8ao>; + + phys = <&p2u_hsio_0>; + phy-names = "p2u-0"; + }; + + pcie@14140000 { + status = "okay"; + + vddio-pex-ctl-supply = <&vdd_1v8ao>; + + phys = <&p2u_hsio_7>; + phy-names = "p2u-0"; + }; + + pcie@14180000 { + status = "okay"; + + vddio-pex-ctl-supply = <&vdd_1v8ao>; + + phys = <&p2u_hsio_2>, <&p2u_hsio_3>, <&p2u_hsio_4>, + <&p2u_hsio_5>; + phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3"; + }; + + pcie@141a0000 { + status = "disabled"; + + vddio-pex-ctl-supply = <&vdd_1v8ao>; + + phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>, + <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>, + <&p2u_nvhs_6>, <&p2u_nvhs_7>; + + phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4", + "p2u-5", "p2u-6", "p2u-7"; + }; + fan: fan { compatible = "pwm-fan"; pwms = <&pwm4 0 45334>; diff --git a/dts/src/arm64/nvidia/tegra194.dtsi b/dts/src/arm64/nvidia/tegra194.dtsi index c77ca211fa..adebbbf36b 100644 --- a/dts/src/arm64/nvidia/tegra194.dtsi +++ b/dts/src/arm64/nvidia/tegra194.dtsi @@ -59,6 +59,77 @@ snps,rxpbl = <8>; }; + aconnect { + compatible = "nvidia,tegra194-aconnect", + "nvidia,tegra210-aconnect"; + clocks = <&bpmp TEGRA194_CLK_APE>, + <&bpmp TEGRA194_CLK_APB2APE>; + clock-names = "ape", "apb2ape"; + power-domains = <&bpmp TEGRA194_POWER_DOMAIN_AUD>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x02900000 0x02900000 0x200000>; + status = "disabled"; + + dma-controller@2930000 { + compatible = "nvidia,tegra194-adma", + "nvidia,tegra186-adma"; + reg = <0x02930000 0x20000>; + interrupt-parent = <&agic>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + clocks = <&bpmp TEGRA194_CLK_AHUB>; + clock-names = "d_audio"; + status = "disabled"; + }; + + agic: interrupt-controller@2a40000 { + compatible = "nvidia,tegra194-agic", + "nvidia,tegra210-agic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x02a41000 0x1000>, + <0x02a42000 0x2000>; + interrupts = <GIC_SPI 145 + (GIC_CPU_MASK_SIMPLE(4) | + IRQ_TYPE_LEVEL_HIGH)>; + clocks = <&bpmp TEGRA194_CLK_APE>; + clock-names = "clk"; + status = "disabled"; + }; + }; + uarta: serial@3100000 { compatible = "nvidia,tegra194-uart", "nvidia,tegra20-uart"; reg = <0x03100000 0x40>; @@ -423,6 +494,166 @@ #mbox-cells = <2>; }; + p2u_hsio_0: phy@3e10000 { + compatible = "nvidia,tegra194-p2u"; + reg = <0x03e10000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; + + p2u_hsio_1: phy@3e20000 { + compatible = "nvidia,tegra194-p2u"; + reg = <0x03e20000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; + + p2u_hsio_2: phy@3e30000 { + compatible = "nvidia,tegra194-p2u"; + reg = <0x03e30000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; + + p2u_hsio_3: phy@3e40000 { + compatible = "nvidia,tegra194-p2u"; + reg = <0x03e40000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; + + p2u_hsio_4: phy@3e50000 { + compatible = "nvidia,tegra194-p2u"; + reg = <0x03e50000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; + + p2u_hsio_5: phy@3e60000 { + compatible = "nvidia,tegra194-p2u"; + reg = <0x03e60000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; + + p2u_hsio_6: phy@3e70000 { + compatible = "nvidia,tegra194-p2u"; + reg = <0x03e70000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; + + p2u_hsio_7: phy@3e80000 { + compatible = "nvidia,tegra194-p2u"; + reg = <0x03e80000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; + + p2u_hsio_8: phy@3e90000 { + compatible = "nvidia,tegra194-p2u"; + reg = <0x03e90000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; + + p2u_hsio_9: phy@3ea0000 { + compatible = "nvidia,tegra194-p2u"; + reg = <0x03ea0000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; + + p2u_nvhs_0: phy@3eb0000 { + compatible = "nvidia,tegra194-p2u"; + reg = <0x03eb0000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; + + p2u_nvhs_1: phy@3ec0000 { + compatible = "nvidia,tegra194-p2u"; + reg = <0x03ec0000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; + + p2u_nvhs_2: phy@3ed0000 { + compatible = "nvidia,tegra194-p2u"; + reg = <0x03ed0000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; + + p2u_nvhs_3: phy@3ee0000 { + compatible = "nvidia,tegra194-p2u"; + reg = <0x03ee0000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; + + p2u_nvhs_4: phy@3ef0000 { + compatible = "nvidia,tegra194-p2u"; + reg = <0x03ef0000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; + + p2u_nvhs_5: phy@3f00000 { + compatible = "nvidia,tegra194-p2u"; + reg = <0x03f00000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; + + p2u_nvhs_6: phy@3f10000 { + compatible = "nvidia,tegra194-p2u"; + reg = <0x03f10000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; + + p2u_nvhs_7: phy@3f20000 { + compatible = "nvidia,tegra194-p2u"; + reg = <0x03f20000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; + + p2u_hsio_10: phy@3f30000 { + compatible = "nvidia,tegra194-p2u"; + reg = <0x03f30000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; + + p2u_hsio_11: phy@3f40000 { + compatible = "nvidia,tegra194-p2u"; + reg = <0x03f40000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; + hsp_aon: hsp@c150000 { compatible = "nvidia,tegra194-hsp", "nvidia,tegra186-hsp"; reg = <0x0c150000 0xa0000>; @@ -886,6 +1117,283 @@ }; }; + pcie@14100000 { + compatible = "nvidia,tegra194-pcie", "snps,dw-pcie"; + power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX1A>; + reg = <0x00 0x14100000 0x0 0x00020000 /* appl registers (128K) */ + 0x00 0x30000000 0x0 0x00040000 /* configuration space (256K) */ + 0x00 0x30040000 0x0 0x00040000 /* iATU_DMA reg space (256K) */ + 0x00 0x30080000 0x0 0x00040000>; /* DBI reg space (256K) */ + reg-names = "appl", "config", "atu_dma", "dbi"; + + status = "disabled"; + + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + num-lanes = <1>; + num-viewport = <8>; + linux,pci-domain = <1>; + + clocks = <&bpmp TEGRA194_CLK_PEX0_CORE_1>; + clock-names = "core"; + + resets = <&bpmp TEGRA194_RESET_PEX0_CORE_1_APB>, + <&bpmp TEGRA194_RESET_PEX0_CORE_1>; + reset-names = "apb", "core"; + + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ + <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */ + interrupt-names = "intr", "msi"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + + nvidia,bpmp = <&bpmp 1>; + + supports-clkreq; + nvidia,aspm-cmrt-us = <60>; + nvidia,aspm-pwr-on-t-us = <20>; + nvidia,aspm-l0s-entrance-latency-us = <3>; + + bus-range = <0x0 0xff>; + ranges = <0x81000000 0x0 0x30100000 0x0 0x30100000 0x0 0x00100000 /* downstream I/O (1MB) */ + 0xc2000000 0x12 0x00000000 0x12 0x00000000 0x0 0x30000000 /* prefetchable memory (768MB) */ + 0x82000000 0x0 0x40000000 0x12 0x30000000 0x0 0x10000000>; /* non-prefetchable memory (256MB) */ + }; + + pcie@14120000 { + compatible = "nvidia,tegra194-pcie", "snps,dw-pcie"; + power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX1A>; + reg = <0x00 0x14120000 0x0 0x00020000 /* appl registers (128K) */ + 0x00 0x32000000 0x0 0x00040000 /* configuration space (256K) */ + 0x00 0x32040000 0x0 0x00040000 /* iATU_DMA reg space (256K) */ + 0x00 0x32080000 0x0 0x00040000>; /* DBI reg space (256K) */ + reg-names = "appl", "config", "atu_dma", "dbi"; + + status = "disabled"; + + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + num-lanes = <1>; + num-viewport = <8>; + linux,pci-domain = <2>; + + clocks = <&bpmp TEGRA194_CLK_PEX0_CORE_2>; + clock-names = "core"; + + resets = <&bpmp TEGRA194_RESET_PEX0_CORE_2_APB>, + <&bpmp TEGRA194_RESET_PEX0_CORE_2>; + reset-names = "apb", "core"; + + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ + <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */ + interrupt-names = "intr", "msi"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; + + nvidia,bpmp = <&bpmp 2>; + + supports-clkreq; + nvidia,aspm-cmrt-us = <60>; + nvidia,aspm-pwr-on-t-us = <20>; + nvidia,aspm-l0s-entrance-latency-us = <3>; + + bus-range = <0x0 0xff>; + ranges = <0x81000000 0x0 0x32100000 0x0 0x32100000 0x0 0x00100000 /* downstream I/O (1MB) */ + 0xc2000000 0x12 0x40000000 0x12 0x40000000 0x0 0x30000000 /* prefetchable memory (768MB) */ + 0x82000000 0x0 0x40000000 0x12 0x70000000 0x0 0x10000000>; /* non-prefetchable memory (256MB) */ + }; + + pcie@14140000 { + compatible = "nvidia,tegra194-pcie", "snps,dw-pcie"; + power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX1A>; + reg = <0x00 0x14140000 0x0 0x00020000 /* appl registers (128K) */ + 0x00 0x34000000 0x0 0x00040000 /* configuration space (256K) */ + 0x00 0x34040000 0x0 0x00040000 /* iATU_DMA reg space (256K) */ + 0x00 0x34080000 0x0 0x00040000>; /* DBI reg space (256K) */ + reg-names = "appl", "config", "atu_dma", "dbi"; + + status = "disabled"; + + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + num-lanes = <1>; + num-viewport = <8>; + linux,pci-domain = <3>; + + clocks = <&bpmp TEGRA194_CLK_PEX0_CORE_3>; + clock-names = "core"; + + resets = <&bpmp TEGRA194_RESET_PEX0_CORE_3_APB>, + <&bpmp TEGRA194_RESET_PEX0_CORE_3>; + reset-names = "apb", "core"; + + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ + <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */ + interrupt-names = "intr", "msi"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + + nvidia,bpmp = <&bpmp 3>; + + supports-clkreq; + nvidia,aspm-cmrt-us = <60>; + nvidia,aspm-pwr-on-t-us = <20>; + nvidia,aspm-l0s-entrance-latency-us = <3>; + + bus-range = <0x0 0xff>; + ranges = <0x81000000 0x0 0x34100000 0x0 0x34100000 0x0 0x00100000 /* downstream I/O (1MB) */ + 0xc2000000 0x12 0x80000000 0x12 0x80000000 0x0 0x30000000 /* prefetchable memory (768MB) */ + 0x82000000 0x0 0x40000000 0x12 0xb0000000 0x0 0x10000000>; /* non-prefetchable memory (256MB) */ + }; + + pcie@14160000 { + compatible = "nvidia,tegra194-pcie", "snps,dw-pcie"; + power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX4A>; + reg = <0x00 0x14160000 0x0 0x00020000 /* appl registers (128K) */ + 0x00 0x36000000 0x0 0x00040000 /* configuration space (256K) */ + 0x00 0x36040000 0x0 0x00040000 /* iATU_DMA reg space (256K) */ + 0x00 0x36080000 0x0 0x00040000>; /* DBI reg space (256K) */ + reg-names = "appl", "config", "atu_dma", "dbi"; + + status = "disabled"; + + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + num-lanes = <4>; + num-viewport = <8>; + linux,pci-domain = <4>; + + clocks = <&bpmp TEGRA194_CLK_PEX0_CORE_4>; + clock-names = "core"; + + resets = <&bpmp TEGRA194_RESET_PEX0_CORE_4_APB>, + <&bpmp TEGRA194_RESET_PEX0_CORE_4>; + reset-names = "apb", "core"; + + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ + <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */ + interrupt-names = "intr", "msi"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; + + nvidia,bpmp = <&bpmp 4>; + + supports-clkreq; + nvidia,aspm-cmrt-us = <60>; + nvidia,aspm-pwr-on-t-us = <20>; + nvidia,aspm-l0s-entrance-latency-us = <3>; + + bus-range = <0x0 0xff>; + ranges = <0x81000000 0x0 0x36100000 0x0 0x36100000 0x0 0x00100000 /* downstream I/O (1MB) */ + 0xc2000000 0x14 0x00000000 0x14 0x00000000 0x3 0x40000000 /* prefetchable memory (13GB) */ + 0x82000000 0x0 0x40000000 0x17 0x40000000 0x0 0xc0000000>; /* non-prefetchable memory (3GB) */ + }; + + pcie@14180000 { + compatible = "nvidia,tegra194-pcie", "snps,dw-pcie"; + power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8B>; + reg = <0x00 0x14180000 0x0 0x00020000 /* appl registers (128K) */ + 0x00 0x38000000 0x0 0x00040000 /* configuration space (256K) */ + 0x00 0x38040000 0x0 0x00040000 /* iATU_DMA reg space (256K) */ + 0x00 0x38080000 0x0 0x00040000>; /* DBI reg space (256K) */ + reg-names = "appl", "config", "atu_dma", "dbi"; + + status = "disabled"; + + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + num-lanes = <8>; + num-viewport = <8>; + linux,pci-domain = <0>; + + clocks = <&bpmp TEGRA194_CLK_PEX0_CORE_0>; + clock-names = "core"; + + resets = <&bpmp TEGRA194_RESET_PEX0_CORE_0_APB>, + <&bpmp TEGRA194_RESET_PEX0_CORE_0>; + reset-names = "apb", "core"; + + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */ + interrupt-names = "intr", "msi"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + + nvidia,bpmp = <&bpmp 0>; + + supports-clkreq; + nvidia,aspm-cmrt-us = <60>; + nvidia,aspm-pwr-on-t-us = <20>; + nvidia,aspm-l0s-entrance-latency-us = <3>; + + bus-range = <0x0 0xff>; + ranges = <0x81000000 0x0 0x38100000 0x0 0x38100000 0x0 0x00100000 /* downstream I/O (1MB) */ + 0xc2000000 0x18 0x00000000 0x18 0x00000000 0x3 0x40000000 /* prefetchable memory (13GB) */ + 0x82000000 0x0 0x40000000 0x1b 0x40000000 0x0 0xc0000000>; /* non-prefetchable memory (3GB) */ + }; + + pcie@141a0000 { + compatible = "nvidia,tegra194-pcie", "snps,dw-pcie"; + power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8A>; + reg = <0x00 0x141a0000 0x0 0x00020000 /* appl registers (128K) */ + 0x00 0x3a000000 0x0 0x00040000 /* configuration space (256K) */ + 0x00 0x3a040000 0x0 0x00040000 /* iATU_DMA reg space (256K) */ + 0x00 0x3a080000 0x0 0x00040000>; /* DBI reg space (256K) */ + reg-names = "appl", "config", "atu_dma", "dbi"; + + status = "disabled"; + + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + num-lanes = <8>; + num-viewport = <8>; + linux,pci-domain = <5>; + + clocks = <&bpmp TEGRA194_CLK_PEX1_CORE_5>, + <&bpmp TEGRA194_CLK_PEX1_CORE_5M>; + clock-names = "core", "core_m"; + + resets = <&bpmp TEGRA194_RESET_PEX1_CORE_5_APB>, + <&bpmp TEGRA194_RESET_PEX1_CORE_5>; + reset-names = "apb", "core"; + + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */ + interrupt-names = "intr", "msi"; + + nvidia,bpmp = <&bpmp 5>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; + + supports-clkreq; + nvidia,aspm-cmrt-us = <60>; + nvidia,aspm-pwr-on-t-us = <20>; + nvidia,aspm-l0s-entrance-latency-us = <3>; + + bus-range = <0x0 0xff>; + ranges = <0x81000000 0x0 0x3a100000 0x0 0x3a100000 0x0 0x00100000 /* downstream I/O (1MB) */ + 0xc2000000 0x1c 0x00000000 0x1c 0x00000000 0x3 0x40000000 /* prefetchable memory (13GB) */ + 0x82000000 0x0 0x40000000 0x1f 0x40000000 0x0 0xc0000000>; /* non-prefetchable memory (3GB) */ + }; + sysram@40000000 { compatible = "nvidia,tegra194-sysram", "mmio-sram"; reg = <0x0 0x40000000 0x0 0x50000>; @@ -1053,5 +1561,6 @@ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; interrupt-parent = <&gic>; + always-on; }; }; diff --git a/dts/src/arm64/nvidia/tegra210-p2180.dtsi b/dts/src/arm64/nvidia/tegra210-p2180.dtsi index 4dcd0d3618..27723829d0 100644 --- a/dts/src/arm64/nvidia/tegra210-p2180.dtsi +++ b/dts/src/arm64/nvidia/tegra210-p2180.dtsi @@ -264,6 +264,19 @@ }; }; + i2c@7000c500 { + /* module ID EEPROM */ + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + + address-bits = <8>; + page-size = <8>; + size = <256>; + read-only; + }; + }; + pmc@7000e400 { nvidia,invert-interrupt; }; @@ -328,7 +341,8 @@ regulator-max-microvolt = <1320000>; enable-gpios = <&pmic 6 GPIO_ACTIVE_HIGH>; regulator-ramp-delay = <80>; - regulator-enable-ramp-delay = <1000>; + regulator-enable-ramp-delay = <2000>; + regulator-settling-time-us = <160>; }; }; }; diff --git a/dts/src/arm64/nvidia/tegra210-p2371-2180.dts b/dts/src/arm64/nvidia/tegra210-p2371-2180.dts index 5a57396b59..a3cafe39ba 100644 --- a/dts/src/arm64/nvidia/tegra210-p2371-2180.dts +++ b/dts/src/arm64/nvidia/tegra210-p2371-2180.dts @@ -79,6 +79,19 @@ }; }; + i2c@7000c500 { + /* carrier board ID EEPROM */ + eeprom@57 { + compatible = "atmel,24c02"; + reg = <0x57>; + + address-bits = <8>; + page-size = <8>; + size = <256>; + read-only; + }; + }; + clock@70110000 { status = "okay"; diff --git a/dts/src/arm64/nvidia/tegra210-p3450-0000.dts b/dts/src/arm64/nvidia/tegra210-p3450-0000.dts index 5d0181908f..9d17ec707b 100644 --- a/dts/src/arm64/nvidia/tegra210-p3450-0000.dts +++ b/dts/src/arm64/nvidia/tegra210-p3450-0000.dts @@ -88,6 +88,35 @@ status = "okay"; }; + pwm@7000a000 { + status = "okay"; + }; + + i2c@7000c500 { + status = "okay"; + clock-frequency = <100000>; + + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + + address-bits = <8>; + page-size = <8>; + size = <256>; + read-only; + }; + + eeprom@57 { + compatible = "atmel,24c02"; + reg = <0x57>; + + address-bits = <8>; + page-size = <8>; + size = <256>; + read-only; + }; + }; + hdmi_ddc: i2c@7000c700 { status = "okay"; clock-frequency = <100000>; @@ -515,6 +544,12 @@ cpu@3 { enable-method = "psci"; }; + + idle-states { + cpu-sleep { + status = "okay"; + }; + }; }; gpio-keys { @@ -633,17 +668,16 @@ }; vdd_gpu: regulator@6 { - compatible = "regulator-fixed"; + compatible = "pwm-regulator"; reg = <6>; - + pwms = <&pwm 1 4880>; regulator-name = "VDD_GPU"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-enable-ramp-delay = <250>; - - gpio = <&pmic 6 GPIO_ACTIVE_HIGH>; - enable-active-high; - + regulator-min-microvolt = <710000>; + regulator-max-microvolt = <1320000>; + regulator-ramp-delay = <80>; + regulator-enable-ramp-delay = <2000>; + regulator-settling-time-us = <160>; + enable-gpios = <&pmic 6 GPIO_ACTIVE_HIGH>; vin-supply = <&vdd_5v0_sys>; }; }; diff --git a/dts/src/arm64/nvidia/tegra210.dtsi b/dts/src/arm64/nvidia/tegra210.dtsi index a550c0a4d5..659753118e 100644 --- a/dts/src/arm64/nvidia/tegra210.dtsi +++ b/dts/src/arm64/nvidia/tegra210.dtsi @@ -48,6 +48,11 @@ <&tegra_car 72>, <&tegra_car 74>; reset-names = "pex", "afi", "pcie_x"; + + pinctrl-names = "default", "idle"; + pinctrl-0 = <&pex_dpd_disable>; + pinctrl-1 = <&pex_dpd_enable>; + status = "disabled"; pci@1,0 { @@ -848,6 +853,20 @@ pins = "sdmmc3"; power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>; }; + + pex_dpd_disable: pex_en { + pex-dpd-disable { + pins = "pex-bias", "pex-clk1", "pex-clk2"; + low-power-disable; + }; + }; + + pex_dpd_enable: pex_dis { + pex-dpd-enable { + pins = "pex-bias", "pex-clk1", "pex-clk2"; + low-power-enable; + }; + }; }; fuse@7000f800 { @@ -1258,7 +1277,7 @@ compatible = "nvidia,tegra210-agic"; #interrupt-cells = <3>; interrupt-controller; - reg = <0x702f9000 0x2000>, + reg = <0x702f9000 0x1000>, <0x702fa000 0x2000>; interrupts = <GIC_SPI 102 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; clocks = <&tegra_car TEGRA210_CLK_APE>; @@ -1430,6 +1449,7 @@ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; interrupt-parent = <&gic>; + arm,no-tick-in-suspend; }; soctherm: thermal-sensor@700e2000 { diff --git a/dts/src/arm64/qcom/msm8916.dtsi b/dts/src/arm64/qcom/msm8916.dtsi index dacd465fc6..5ea9fb8f2f 100644 --- a/dts/src/arm64/qcom/msm8916.dtsi +++ b/dts/src/arm64/qcom/msm8916.dtsi @@ -102,7 +102,7 @@ reg = <0x0>; next-level-cache = <&L2_0>; enable-method = "psci"; - cpu-idle-states = <&CPU_SPC>; + cpu-idle-states = <&CPU_SLEEP_0>; clocks = <&apcs>; operating-points-v2 = <&cpu_opp_table>; #cooling-cells = <2>; @@ -114,7 +114,7 @@ reg = <0x1>; next-level-cache = <&L2_0>; enable-method = "psci"; - cpu-idle-states = <&CPU_SPC>; + cpu-idle-states = <&CPU_SLEEP_0>; clocks = <&apcs>; operating-points-v2 = <&cpu_opp_table>; #cooling-cells = <2>; @@ -126,7 +126,7 @@ reg = <0x2>; next-level-cache = <&L2_0>; enable-method = "psci"; - cpu-idle-states = <&CPU_SPC>; + cpu-idle-states = <&CPU_SLEEP_0>; clocks = <&apcs>; operating-points-v2 = <&cpu_opp_table>; #cooling-cells = <2>; @@ -138,7 +138,7 @@ reg = <0x3>; next-level-cache = <&L2_0>; enable-method = "psci"; - cpu-idle-states = <&CPU_SPC>; + cpu-idle-states = <&CPU_SLEEP_0>; clocks = <&apcs>; operating-points-v2 = <&cpu_opp_table>; #cooling-cells = <2>; @@ -150,8 +150,11 @@ }; idle-states { - CPU_SPC: spc { + entry-method = "psci"; + + CPU_SLEEP_0: cpu-sleep-0 { compatible = "arm,idle-state"; + idle-state-name = "standalone-power-collapse"; arm,psci-suspend-param = <0x40000002>; entry-latency-us = <130>; exit-latency-us = <150>; @@ -1164,7 +1167,7 @@ }; funnel@821000 { - compatible = "arm,coresight-funnel", "arm,primecell"; + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0x821000 0x1000>; clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; @@ -1277,7 +1280,7 @@ }; funnel@841000 { /* APSS funnel only 4 inputs are used */ - compatible = "arm,coresight-funnel", "arm,primecell"; + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0x841000 0x1000>; clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; diff --git a/dts/src/arm64/qcom/msm8996.dtsi b/dts/src/arm64/qcom/msm8996.dtsi index 942465d8ae..96c0a481f4 100644 --- a/dts/src/arm64/qcom/msm8996.dtsi +++ b/dts/src/arm64/qcom/msm8996.dtsi @@ -94,6 +94,8 @@ compatible = "qcom,kryo"; reg = <0x0 0x0>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; + capacity-dmips-mhz = <1024>; next-level-cache = <&L2_0>; L2_0: l2-cache { compatible = "cache"; @@ -106,6 +108,8 @@ compatible = "qcom,kryo"; reg = <0x0 0x1>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; + capacity-dmips-mhz = <1024>; next-level-cache = <&L2_0>; }; @@ -114,6 +118,8 @@ compatible = "qcom,kryo"; reg = <0x0 0x100>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; + capacity-dmips-mhz = <1024>; next-level-cache = <&L2_1>; L2_1: l2-cache { compatible = "cache"; @@ -126,6 +132,8 @@ compatible = "qcom,kryo"; reg = <0x0 0x101>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; + capacity-dmips-mhz = <1024>; next-level-cache = <&L2_1>; }; @@ -150,6 +158,19 @@ }; }; }; + + idle-states { + entry-method = "psci"; + + CPU_SLEEP_0: cpu-sleep-0 { + compatible = "arm,idle-state"; + idle-state-name = "standalone-power-collapse"; + arm,psci-suspend-param = <0x00000004>; + entry-latency-us = <130>; + exit-latency-us = <80>; + min-residency-us = <300>; + }; + }; }; thermal-zones { @@ -846,10 +867,11 @@ clock-names = "ref_clk_src", "ref_clk"; clocks = <&rpmcc RPM_SMD_LN_BB_CLK>, <&gcc GCC_UFS_CLKREF_CLK>; + resets = <&ufshc 0>; status = "disabled"; }; - ufshc@624000 { + ufshc: ufshc@624000 { compatible = "qcom,ufshc"; reg = <0x624000 0x2500>; interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; @@ -905,6 +927,7 @@ <0 0>; lanes-per-direction = <1>; + #reset-cells = <1>; status = "disabled"; ufs_variant { @@ -1154,7 +1177,6 @@ clock-names = "iface", "bus"; #iommu-cells = <1>; - status = "disabled"; }; camss: camss@a00000 { @@ -1307,8 +1329,6 @@ clock-names = "iface", "bus"; power-domains = <&mmcc GPU_GDSC>; - - status = "disabled"; }; mdp_smmu: arm,smmu@d00000 { @@ -1325,8 +1345,6 @@ clock-names = "iface", "bus"; power-domains = <&mmcc MDSS_GDSC>; - - status = "disabled"; }; lpass_q6_smmu: arm,smmu-lpass_q6@1600000 { @@ -1353,7 +1371,6 @@ clocks = <&gcc GCC_HLOS1_VOTE_LPASS_CORE_SMMU_CLK>, <&gcc GCC_HLOS1_VOTE_LPASS_ADSP_SMMU_CLK>; clock-names = "iface", "bus"; - status = "disabled"; }; agnoc@0 { @@ -1674,7 +1691,7 @@ #interrupt-cells = <1>; clocks = <&mmcc MDSS_AHB_CLK>; - clock-names = "iface_clk"; + clock-names = "iface"; #address-cells = <1>; #size-cells = <1>; @@ -1693,11 +1710,11 @@ <&mmcc MDSS_MDP_CLK>, <&mmcc SMMU_MDP_AXI_CLK>, <&mmcc MDSS_VSYNC_CLK>; - clock-names = "iface_clk", - "bus_clk", - "core_clk", - "iommu_clk", - "vsync_clk"; + clock-names = "iface", + "bus", + "core", + "iommu", + "vsync"; iommus = <&mdp_smmu 0>; @@ -1732,11 +1749,11 @@ <&mmcc MDSS_HDMI_AHB_CLK>, <&mmcc MDSS_EXTPCLK_CLK>; clock-names = - "mdp_core_clk", - "iface_clk", - "core_clk", - "alt_iface_clk", - "extp_clk"; + "mdp_core", + "iface", + "core", + "alt_iface", + "extp"; phys = <&hdmi_phy>; phy-names = "hdmi_phy"; @@ -1773,8 +1790,8 @@ clocks = <&mmcc MDSS_AHB_CLK>, <&gcc GCC_HDMI_CLKREF_CLK>; - clock-names = "iface_clk", - "ref_clk"; + clock-names = "iface", + "ref"; }; }; }; @@ -1814,7 +1831,7 @@ power-domains = <&gcc HLOS1_VOTE_LPASS_ADSP_GDSC>; compatible = "qcom,apr-v2"; qcom,smd-channels = "apr_audio_svc"; - reg = <APR_DOMAIN_ADSP>; + qcom,apr-domain = <APR_DOMAIN_ADSP>; #address-cells = <1>; #size-cells = <0>; diff --git a/dts/src/arm64/qcom/msm8998-mtp.dtsi b/dts/src/arm64/qcom/msm8998-mtp.dtsi index f09f3e03f7..108667ce4f 100644 --- a/dts/src/arm64/qcom/msm8998-mtp.dtsi +++ b/dts/src/arm64/qcom/msm8998-mtp.dtsi @@ -27,6 +27,23 @@ status = "okay"; }; +&pm8005_lsid1 { + pm8005-regulators { + compatible = "qcom,pm8005-regulators"; + + vdd_s1-supply = <&vph_pwr>; + + pm8005_s1: s1 { /* VDD_GFX supply */ + regulator-min-microvolt = <524000>; + regulator-max-microvolt = <1100000>; + regulator-enable-ramp-delay = <500>; + + /* hack until we rig up the gpu consumer */ + regulator-always-on; + }; + }; +}; + &qusb2phy { status = "okay"; diff --git a/dts/src/arm64/qcom/msm8998.dtsi b/dts/src/arm64/qcom/msm8998.dtsi index 574be78a93..c13ed7aeb1 100644 --- a/dts/src/arm64/qcom/msm8998.dtsi +++ b/dts/src/arm64/qcom/msm8998.dtsi @@ -4,6 +4,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,gcc-msm8998.h> #include <dt-bindings/clock/qcom,rpmcc.h> +#include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/gpio/gpio.h> / { @@ -78,6 +79,7 @@ compatible = "arm,armv8"; reg = <0x0 0x0>; enable-method = "psci"; + cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>; next-level-cache = <&L2_0>; L2_0: l2-cache { compatible = "arm,arch-cache"; @@ -96,6 +98,7 @@ compatible = "arm,armv8"; reg = <0x0 0x1>; enable-method = "psci"; + cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>; next-level-cache = <&L2_0>; L1_I_1: l1-icache { compatible = "arm,arch-cache"; @@ -110,6 +113,7 @@ compatible = "arm,armv8"; reg = <0x0 0x2>; enable-method = "psci"; + cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>; next-level-cache = <&L2_0>; L1_I_2: l1-icache { compatible = "arm,arch-cache"; @@ -124,6 +128,7 @@ compatible = "arm,armv8"; reg = <0x0 0x3>; enable-method = "psci"; + cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>; next-level-cache = <&L2_0>; L1_I_3: l1-icache { compatible = "arm,arch-cache"; @@ -138,6 +143,7 @@ compatible = "arm,armv8"; reg = <0x0 0x100>; enable-method = "psci"; + cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>; next-level-cache = <&L2_1>; L2_1: l2-cache { compatible = "arm,arch-cache"; @@ -156,6 +162,7 @@ compatible = "arm,armv8"; reg = <0x0 0x101>; enable-method = "psci"; + cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>; next-level-cache = <&L2_1>; L1_I_101: l1-icache { compatible = "arm,arch-cache"; @@ -170,6 +177,7 @@ compatible = "arm,armv8"; reg = <0x0 0x102>; enable-method = "psci"; + cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>; next-level-cache = <&L2_1>; L1_I_102: l1-icache { compatible = "arm,arch-cache"; @@ -184,6 +192,7 @@ compatible = "arm,armv8"; reg = <0x0 0x103>; enable-method = "psci"; + cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>; next-level-cache = <&L2_1>; L1_I_103: l1-icache { compatible = "arm,arch-cache"; @@ -230,6 +239,48 @@ }; }; }; + + idle-states { + entry-method = "psci"; + + LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 { + compatible = "arm,idle-state"; + idle-state-name = "little-retention"; + arm,psci-suspend-param = <0x00000002>; + entry-latency-us = <81>; + exit-latency-us = <86>; + min-residency-us = <200>; + }; + + LITTLE_CPU_SLEEP_1: cpu-sleep-0-1 { + compatible = "arm,idle-state"; + idle-state-name = "little-power-collapse"; + arm,psci-suspend-param = <0x40000003>; + entry-latency-us = <273>; + exit-latency-us = <612>; + min-residency-us = <1000>; + local-timer-stop; + }; + + BIG_CPU_SLEEP_0: cpu-sleep-1-0 { + compatible = "arm,idle-state"; + idle-state-name = "big-retention"; + arm,psci-suspend-param = <0x00000002>; + entry-latency-us = <79>; + exit-latency-us = <82>; + min-residency-us = <200>; + }; + + BIG_CPU_SLEEP_1: cpu-sleep-1-1 { + compatible = "arm,idle-state"; + idle-state-name = "big-power-collapse"; + arm,psci-suspend-param = <0x40000003>; + entry-latency-us = <336>; + exit-latency-us = <525>; + min-residency-us = <1000>; + local-timer-stop; + }; + }; }; firmware { @@ -264,6 +315,56 @@ compatible = "qcom,rpmcc-msm8998", "qcom,rpmcc"; #clock-cells = <1>; }; + + rpmpd: power-controller { + compatible = "qcom,msm8998-rpmpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmpd_opp_table>; + + rpmpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmpd_opp_ret: opp1 { + opp-level = <16>; + }; + + rpmpd_opp_ret_plus: opp2 { + opp-level = <32>; + }; + + rpmpd_opp_min_svs: opp3 { + opp-level = <48>; + }; + + rpmpd_opp_low_svs: opp4 { + opp-level = <64>; + }; + + rpmpd_opp_svs: opp5 { + opp-level = <128>; + }; + + rpmpd_opp_svs_plus: opp6 { + opp-level = <192>; + }; + + rpmpd_opp_nom: opp7 { + opp-level = <256>; + }; + + rpmpd_opp_nom_plus: opp8 { + opp-level = <320>; + }; + + rpmpd_opp_turbo: opp9 { + opp-level = <384>; + }; + + rpmpd_opp_turbo_plus: opp10 { + opp-level = <512>; + }; + }; + }; }; }; @@ -758,6 +859,90 @@ #thermal-sensor-cells = <1>; }; + anoc1_smmu: iommu@1680000 { + compatible = "qcom,msm8998-smmu-v2", "qcom,smmu-v2"; + reg = <0x01680000 0x10000>; + #iommu-cells = <1>; + + #global-interrupts = <0>; + interrupts = + <GIC_SPI 364 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 365 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 366 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 367 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 368 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 369 IRQ_TYPE_EDGE_RISING>; + }; + + pcie0: pci@1c00000 { + compatible = "qcom,pcie-msm8996"; + reg = <0x01c00000 0x2000>, + <0x1b000000 0xf1d>, + <0x1b000f20 0xa8>, + <0x1b100000 0x100000>; + reg-names = "parf", "dbi", "elbi", "config"; + device_type = "pci"; + linux,pci-domain = <0>; + bus-range = <0x00 0xff>; + #address-cells = <3>; + #size-cells = <2>; + num-lanes = <1>; + phys = <&pciephy>; + phy-names = "pciephy"; + + ranges = <0x01000000 0x0 0x1b200000 0x1b200000 0x0 0x100000>, + <0x02000000 0x0 0x1b300000 0x1b300000 0x0 0xd00000>; + + #interrupt-cells = <1>; + interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 135 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc 0 136 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc 0 138 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc 0 139 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_PCIE_0_PIPE_CLK>, + <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_AXI_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_0_AUX_CLK>; + clock-names = "pipe", "bus_master", "bus_slave", "cfg", "aux"; + + power-domains = <&gcc PCIE_0_GDSC>; + iommu-map = <0x100 &anoc1_smmu 0x1480 1>; + perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>; + }; + + phy@1c06000 { + compatible = "qcom,msm8998-qmp-pcie-phy"; + reg = <0x01c06000 0x18c>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_CLKREF_CLK>; + clock-names = "aux", "cfg_ahb", "ref"; + + resets = <&gcc GCC_PCIE_0_PHY_BCR>, <&gcc GCC_PCIE_PHY_BCR>; + reset-names = "phy", "common"; + + vdda-phy-supply = <&vreg_l1a_0p875>; + vdda-pll-supply = <&vreg_l2a_1p2>; + + pciephy: lane@1c06800 { + reg = <0x01c06200 0x128>, <0x01c06400 0x1fc>, <0x01c06800 0x20c>; + #phy-cells = <0>; + + clocks = <&gcc GCC_PCIE_0_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "pcie_0_pipe_clk_src"; + #clock-cells = <0>; + }; + }; + tcsr_mutex_regs: syscon@1f40000 { compatible = "syscon"; reg = <0x1f40000 0x20000>; diff --git a/dts/src/arm64/qcom/pm8998.dtsi b/dts/src/arm64/qcom/pm8998.dtsi index d3ca35a940..051a52df80 100644 --- a/dts/src/arm64/qcom/pm8998.dtsi +++ b/dts/src/arm64/qcom/pm8998.dtsi @@ -39,7 +39,7 @@ #size-cells = <0>; pm8998_pon: pon@800 { - compatible = "qcom,pm8916-pon"; + compatible = "qcom,pm8998-pon"; reg = <0x800>; mode-bootloader = <0x2>; diff --git a/dts/src/arm64/qcom/pms405.dtsi b/dts/src/arm64/qcom/pms405.dtsi index e8e186bc1e..14240fedd9 100644 --- a/dts/src/arm64/qcom/pms405.dtsi +++ b/dts/src/arm64/qcom/pms405.dtsi @@ -98,7 +98,7 @@ qcom,pre-scaling = <1 1>; }; - vph_pwr { + pon_1: vph_pwr { reg = <ADC5_VPH_PWR>; qcom,pre-scaling = <1 3>; }; @@ -108,18 +108,24 @@ qcom,pre-scaling = <1 1>; }; - xo_therm_100k_pu { - reg = <ADC5_XO_THERM_100K_PU>; + pa_therm1: thermistor1 { + reg = <ADC5_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; qcom,pre-scaling = <1 1>; }; - amux_thm1_100k_pu { - reg = <ADC5_AMUX_THM1_100K_PU>; + pa_therm3: thermistor3 { + reg = <ADC5_AMUX_THM3_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; qcom,pre-scaling = <1 1>; }; - amux_thm3_100k_pu { - reg = <ADC5_AMUX_THM3_100K_PU>; + xo_therm: xo_temp { + reg = <ADC5_XO_THERM_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; qcom,pre-scaling = <1 1>; }; }; diff --git a/dts/src/arm64/qcom/qcs404-evb.dtsi b/dts/src/arm64/qcom/qcs404-evb.dtsi index 2c3127167e..11c0a71378 100644 --- a/dts/src/arm64/qcom/qcs404-evb.dtsi +++ b/dts/src/arm64/qcom/qcs404-evb.dtsi @@ -1,6 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 // Copyright (c) 2018, Linaro Limited +#include <dt-bindings/gpio/gpio.h> #include "qcs404.dtsi" #include "pms405.dtsi" @@ -56,18 +57,41 @@ qcom,controlled-remotely; }; +&gcc { + protected-clocks = <GCC_BIMC_CDSP_CLK>, + <GCC_CDSP_CFG_AHB_CLK>, + <GCC_CDSP_BIMC_CLK_SRC>, + <GCC_CDSP_TBU_CLK>; +}; + &pms405_spmi_regulators { - vdd_s3-supply = <&pms405_s3>; + vdd_s3-supply = <&vph_pwr>; pms405_s3: s3 { regulator-always-on; regulator-boot-on; regulator-name = "vdd_apc"; regulator-min-microvolt = <1048000>; - regulator-max-microvolt = <1352000>; + regulator-max-microvolt = <1384000>; }; }; +&pcie { + status = "ok"; + + perst-gpio = <&tlmm 43 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&perst_state>; +}; + +&pcie_phy { + status = "ok"; + + vdda-vp-supply = <&vreg_l3_1p05>; + vdda-vph-supply = <&vreg_l5_1p8>; +}; + &remoteproc_adsp { status = "ok"; }; @@ -118,7 +142,7 @@ }; vreg_l3_1p05: l3 { - regulator-min-microvolt = <1050000>; + regulator-min-microvolt = <1048000>; regulator-max-microvolt = <1160000>; }; @@ -184,6 +208,15 @@ }; &tlmm { + perst_state: perst { + pins = "gpio43"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + output-low; + }; + sdc1_on: sdc1-on { clk { pins = "sdc1_clk"; @@ -200,7 +233,7 @@ data { pins = "sdc1_data"; bias-pull-up; - dreive-strength = <10>; + drive-strength = <10>; }; rclk { @@ -225,7 +258,7 @@ data { pins = "sdc1_data"; bias-pull-up; - dreive-strength = <2>; + drive-strength = <2>; }; rclk { diff --git a/dts/src/arm64/qcom/qcs404.dtsi b/dts/src/arm64/qcom/qcs404.dtsi index ffedf9640a..3d07897750 100644 --- a/dts/src/arm64/qcom/qcs404.dtsi +++ b/dts/src/arm64/qcom/qcs404.dtsi @@ -3,7 +3,10 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,gcc-qcs404.h> +#include <dt-bindings/clock/qcom,turingcc-qcs404.h> #include <dt-bindings/clock/qcom,rpmcc.h> +#include <dt-bindings/power/qcom-rpmpd.h> +#include <dt-bindings/thermal/thermal.h> / { interrupt-parent = <&intc>; @@ -30,7 +33,9 @@ compatible = "arm,cortex-a53"; reg = <0x100>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; next-level-cache = <&L2_0>; + #cooling-cells = <2>; }; CPU1: cpu@101 { @@ -38,7 +43,9 @@ compatible = "arm,cortex-a53"; reg = <0x101>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; next-level-cache = <&L2_0>; + #cooling-cells = <2>; }; CPU2: cpu@102 { @@ -46,7 +53,9 @@ compatible = "arm,cortex-a53"; reg = <0x102>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; next-level-cache = <&L2_0>; + #cooling-cells = <2>; }; CPU3: cpu@103 { @@ -54,13 +63,29 @@ compatible = "arm,cortex-a53"; reg = <0x103>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; next-level-cache = <&L2_0>; + #cooling-cells = <2>; }; L2_0: l2-cache { compatible = "cache"; cache-level = <2>; }; + + idle-states { + entry-method = "psci"; + + CPU_SLEEP_0: cpu-sleep-0 { + compatible = "arm,idle-state"; + idle-state-name = "standalone-power-collapse"; + arm,psci-suspend-param = <0x40000003>; + entry-latency-us = <125>; + exit-latency-us = <180>; + min-residency-us = <595>; + local-timer-stop; + }; + }; }; firmware { @@ -81,99 +106,6 @@ method = "smc"; }; - remoteproc_adsp: remoteproc-adsp { - compatible = "qcom,qcs404-adsp-pas"; - - interrupts-extended = <&intc GIC_SPI 293 IRQ_TYPE_EDGE_RISING>, - <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, - <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, - <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, - <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "wdog", "fatal", "ready", - "handover", "stop-ack"; - - clocks = <&xo_board>; - clock-names = "xo"; - - memory-region = <&adsp_fw_mem>; - - qcom,smem-states = <&adsp_smp2p_out 0>; - qcom,smem-state-names = "stop"; - - status = "disabled"; - - glink-edge { - interrupts = <GIC_SPI 289 IRQ_TYPE_EDGE_RISING>; - - qcom,remote-pid = <2>; - mboxes = <&apcs_glb 8>; - - label = "adsp"; - }; - }; - - remoteproc_cdsp: remoteproc-cdsp { - compatible = "qcom,qcs404-cdsp-pas"; - - interrupts-extended = <&intc GIC_SPI 229 IRQ_TYPE_EDGE_RISING>, - <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, - <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, - <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, - <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "wdog", "fatal", "ready", - "handover", "stop-ack"; - - clocks = <&xo_board>; - clock-names = "xo"; - - memory-region = <&cdsp_fw_mem>; - - qcom,smem-states = <&cdsp_smp2p_out 0>; - qcom,smem-state-names = "stop"; - - status = "disabled"; - - glink-edge { - interrupts = <GIC_SPI 141 IRQ_TYPE_EDGE_RISING>; - - qcom,remote-pid = <5>; - mboxes = <&apcs_glb 12>; - - label = "cdsp"; - }; - }; - - remoteproc_wcss: remoteproc-wcss { - compatible = "qcom,qcs404-wcss-pas"; - - interrupts-extended = <&intc GIC_SPI 153 IRQ_TYPE_EDGE_RISING>, - <&wcss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, - <&wcss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, - <&wcss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, - <&wcss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "wdog", "fatal", "ready", - "handover", "stop-ack"; - - clocks = <&xo_board>; - clock-names = "xo"; - - memory-region = <&wlan_fw_mem>; - - qcom,smem-states = <&wcss_smp2p_out 0>; - qcom,smem-state-names = "stop"; - - status = "disabled"; - - glink-edge { - interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>; - - qcom,remote-pid = <1>; - mboxes = <&apcs_glb 16>; - - label = "wcss"; - }; - }; - reserved-memory { #address-cells = <2>; #size-cells = <2>; @@ -230,6 +162,60 @@ compatible = "qcom,rpmcc-qcs404"; #clock-cells = <1>; }; + + rpmpd: power-controller { + compatible = "qcom,qcs404-rpmpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmpd_opp_table>; + + rpmpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmpd_opp_ret: opp1 { + opp-level = <16>; + }; + + rpmpd_opp_ret_plus: opp2 { + opp-level = <32>; + }; + + rpmpd_opp_min_svs: opp3 { + opp-level = <48>; + }; + + rpmpd_opp_low_svs: opp4 { + opp-level = <64>; + }; + + rpmpd_opp_svs: opp5 { + opp-level = <128>; + }; + + rpmpd_opp_svs_plus: opp6 { + opp-level = <192>; + }; + + rpmpd_opp_nom: opp7 { + opp-level = <256>; + }; + + rpmpd_opp_nom_plus: opp8 { + opp-level = <320>; + }; + + rpmpd_opp_turbo: opp9 { + opp-level = <384>; + }; + + rpmpd_opp_turbo_no_cpr: opp10 { + opp-level = <416>; + }; + + rpmpd_opp_turbo_plus: opp11 { + opp-level = <512>; + }; + }; + }; }; }; @@ -254,11 +240,32 @@ ranges = <0 0 0 0xffffffff>; compatible = "simple-bus"; + turingcc: clock-controller@800000 { + compatible = "qcom,qcs404-turingcc"; + reg = <0x00800000 0x30000>; + clocks = <&gcc GCC_CDSP_CFG_AHB_CLK>; + + #clock-cells = <1>; + #reset-cells = <1>; + + status = "disabled"; + }; + rpm_msg_ram: memory@60000 { compatible = "qcom,rpm-msg-ram"; reg = <0x00060000 0x6000>; }; + qfprom: qfprom@a4000 { + compatible = "qcom,qfprom"; + reg = <0x000a4000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + tsens_caldata: caldata@d0 { + reg = <0x1f8 0x14>; + }; + }; + rng: rng@e3000 { compatible = "qcom,prng-ee"; reg = <0x000e3000 0x1000>; @@ -266,6 +273,67 @@ clock-names = "core"; }; + tsens: thermal-sensor@4a9000 { + compatible = "qcom,qcs404-tsens", "qcom,tsens-v1"; + reg = <0x004a9000 0x1000>, /* TM */ + <0x004a8000 0x1000>; /* SROT */ + nvmem-cells = <&tsens_caldata>; + nvmem-cell-names = "calib"; + #qcom,sensors = <10>; + #thermal-sensor-cells = <1>; + }; + + remoteproc_cdsp: remoteproc@b00000 { + compatible = "qcom,qcs404-cdsp-pas"; + reg = <0x00b00000 0x4040>; + + interrupts-extended = <&intc GIC_SPI 229 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&xo_board>, + <&gcc GCC_CDSP_CFG_AHB_CLK>, + <&gcc GCC_CDSP_TBU_CLK>, + <&gcc GCC_BIMC_CDSP_CLK>, + <&turingcc TURING_WRAPPER_AON_CLK>, + <&turingcc TURING_Q6SS_AHBS_AON_CLK>, + <&turingcc TURING_Q6SS_AHBM_AON_CLK>, + <&turingcc TURING_Q6SS_Q6_AXIM_CLK>; + clock-names = "xo", + "sway", + "tbu", + "bimc", + "ahb_aon", + "q6ss_slave", + "q6ss_master", + "q6_axim"; + + resets = <&gcc GCC_CDSP_RESTART>; + reset-names = "restart"; + + qcom,halt-regs = <&tcsr 0x19004>; + + memory-region = <&cdsp_fw_mem>; + + qcom,smem-states = <&cdsp_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts = <GIC_SPI 141 IRQ_TYPE_EDGE_RISING>; + + qcom,remote-pid = <5>; + mboxes = <&apcs_glb 12>; + + label = "cdsp"; + }; + }; + tlmm: pinctrl@1000000 { compatible = "qcom,qcs404-pinctrl"; reg = <0x01000000 0x200000>, @@ -383,6 +451,7 @@ compatible = "qcom,gcc-qcs404"; reg = <0x01800000 0x80000>; #clock-cells = <1>; + #reset-cells = <1>; assigned-clocks = <&gcc GCC_APSS_AHB_CLK_SRC>; assigned-clock-rates = <19200000>; @@ -393,6 +462,11 @@ reg = <0x01905000 0x20000>; }; + tcsr: syscon@1937000 { + compatible = "syscon"; + reg = <0x01937000 0x25000>; + }; + spmi_bus: spmi@200f000 { compatible = "qcom,spmi-pmic-arb"; reg = <0x0200f000 0x001000>, @@ -411,6 +485,53 @@ #interrupt-cells = <4>; }; + remoteproc_wcss: remoteproc@7400000 { + compatible = "qcom,qcs404-wcss-pas"; + reg = <0x07400000 0x4040>; + + interrupts-extended = <&intc GIC_SPI 153 IRQ_TYPE_EDGE_RISING>, + <&wcss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&wcss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&wcss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&wcss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&xo_board>; + clock-names = "xo"; + + memory-region = <&wlan_fw_mem>; + + qcom,smem-states = <&wcss_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>; + + qcom,remote-pid = <1>; + mboxes = <&apcs_glb 16>; + + label = "wcss"; + }; + }; + + pcie_phy: phy@7786000 { + compatible = "qcom,qcs404-pcie2-phy", "qcom,pcie2-phy"; + reg = <0x07786000 0xb8>; + + clocks = <&gcc GCC_PCIE_0_PIPE_CLK>; + resets = <&gcc GCC_PCIEPHY_0_PHY_BCR>, + <&gcc 21>; + reset-names = "phy", "pipe"; + + clock-output-names = "pcie_0_pipe_clk"; + #phy-cells = <0>; + + status = "disabled"; + }; + sdcc1: sdcc@7804000 { compatible = "qcom,sdhci-msm-v5"; reg = <0x07804000 0x1000>, <0x7805000 0x1000>; @@ -796,6 +917,88 @@ status = "disabled"; }; }; + + remoteproc_adsp: remoteproc@c700000 { + compatible = "qcom,qcs404-adsp-pas"; + reg = <0x0c700000 0x4040>; + + interrupts-extended = <&intc GIC_SPI 293 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&xo_board>; + clock-names = "xo"; + + memory-region = <&adsp_fw_mem>; + + qcom,smem-states = <&adsp_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts = <GIC_SPI 289 IRQ_TYPE_EDGE_RISING>; + + qcom,remote-pid = <2>; + mboxes = <&apcs_glb 8>; + + label = "adsp"; + }; + }; + + pcie: pci@10000000 { + compatible = "qcom,pcie-qcs404", "snps,dw-pcie"; + reg = <0x10000000 0xf1d>, + <0x10000f20 0xa8>, + <0x07780000 0x2000>, + <0x10001000 0x2000>; + reg-names = "dbi", "elbi", "parf", "config"; + device_type = "pci"; + linux,pci-domain = <0>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x81000000 0 0 0x10003000 0 0x00010000>, /* I/O */ + <0x82000000 0 0x10013000 0x10013000 0 0x007ed000>; /* memory */ + + interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + clocks = <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_0_AUX_CLK>, + <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_AXI_CLK>; + clock-names = "iface", "aux", "master_bus", "slave_bus"; + + resets = <&gcc 18>, + <&gcc 17>, + <&gcc 15>, + <&gcc 19>, + <&gcc GCC_PCIE_0_BCR>, + <&gcc 16>; + reset-names = "axi_m", + "axi_s", + "axi_m_sticky", + "pipe_sticky", + "pwr", + "ahb"; + + phys = <&pcie_phy>; + phy-names = "pciephy"; + + status = "disabled"; + }; }; timer { @@ -865,4 +1068,251 @@ #interrupt-cells = <2>; }; }; + + thermal-zones { + aoss-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 0>; + + trips { + aoss_alert0: trip-point@0 { + temperature = <105000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + q6-hvx-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 1>; + + trips { + q6_hvx_alert0: trip-point@0 { + temperature = <105000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + lpass-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 2>; + + trips { + lpass_alert0: trip-point@0 { + temperature = <105000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + wlan-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 3>; + + trips { + wlan_alert0: trip-point@0 { + temperature = <105000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + cluster-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 4>; + + trips { + cluster_alert0: trip-point@0 { + temperature = <95000>; + hysteresis = <2000>; + type = "hot"; + }; + cluster_alert1: trip-point@1 { + temperature = <105000>; + hysteresis = <2000>; + type = "passive"; + }; + cluster_crit: cluster_crit { + temperature = <120000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + cooling-maps { + map0 { + trip = <&cluster_alert1>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 5>; + + trips { + cpu0_alert0: trip-point@0 { + temperature = <95000>; + hysteresis = <2000>; + type = "hot"; + }; + cpu0_alert1: trip-point@1 { + temperature = <105000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu0_crit: cpu_crit { + temperature = <120000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + cooling-maps { + map0 { + trip = <&cpu0_alert1>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 6>; + + trips { + cpu1_alert0: trip-point@0 { + temperature = <95000>; + hysteresis = <2000>; + type = "hot"; + }; + cpu1_alert1: trip-point@1 { + temperature = <105000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu1_crit: cpu_crit { + temperature = <120000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + cooling-maps { + map0 { + trip = <&cpu1_alert1>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu2-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 7>; + + trips { + cpu2_alert0: trip-point@0 { + temperature = <95000>; + hysteresis = <2000>; + type = "hot"; + }; + cpu2_alert1: trip-point@1 { + temperature = <105000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu2_crit: cpu_crit { + temperature = <120000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + cooling-maps { + map0 { + trip = <&cpu2_alert1>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu3-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 8>; + + trips { + cpu3_alert0: trip-point@0 { + temperature = <95000>; + hysteresis = <2000>; + type = "hot"; + }; + cpu3_alert1: trip-point@1 { + temperature = <105000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu3_crit: cpu_crit { + temperature = <120000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + cooling-maps { + map0 { + trip = <&cpu3_alert1>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + gpu-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 9>; + + trips { + gpu_alert0: trip-point@0 { + temperature = <95000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + }; }; diff --git a/dts/src/arm64/qcom/sdm845-cheza-r1.dts b/dts/src/arm64/qcom/sdm845-cheza-r1.dts new file mode 100644 index 0000000000..bd7c25bb8d --- /dev/null +++ b/dts/src/arm64/qcom/sdm845-cheza-r1.dts @@ -0,0 +1,238 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Cheza board device tree source + * + * Copyright 2018 Google LLC. + */ + +/dts-v1/; + +#include "sdm845-cheza.dtsi" + +/ { + model = "Google Cheza (rev1)"; + compatible = "google,cheza-rev1", "qcom,sdm845"; + + /* + * FIXED REGULATORS (not in sdm845-cheza.dtsi) - parents above children + */ + + /* + * NOTE: Technically pp3500_a is not the exact same signal as + * pp3500_a_vbob (there's a load switch between them and the EC can + * control pp3500_a via "en_pp3300_a"), but from the AP's point of + * view they are the same. + */ + pp3500_a: + pp3500_a_vbob: pp3500-a-vbob-regulator { + compatible = "regulator-fixed"; + regulator-name = "vreg_bob"; + + /* + * Comes on automatically when pp5000_ldo comes on, which + * comes on automatically when ppvar_sys comes on + */ + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3500000>; + regulator-max-microvolt = <3500000>; + + vin-supply = <&ppvar_sys>; + }; + + pp3300_dx_edp: pp3300-dx-edp-regulator { + /* Yes, it's really 3.5 despite the name of the signal */ + regulator-min-microvolt = <3500000>; + regulator-max-microvolt = <3500000>; + + vin-supply = <&pp3500_a>; + }; +}; + +/* FIXED REGULATOR OVERRIDES (modifications to sdm845-cheza.dtsi) */ + +/* + * L19 and L28 technically go to 3.3V, but most boards have old AOP firmware + * that limits them to 3.0, and trying to run at 3.3V with that old firmware + * prevents the system from booting. + */ +&src_pp3000_l19a { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; +}; + +&src_pp3300_l22a { + /delete-property/regulator-boot-on; + /delete-property/regulator-always-on; +}; + +&src_pp3300_l28a { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; +}; + +&src_vreg_bob { + regulator-min-microvolt = <3500000>; + regulator-max-microvolt = <3500000>; + vin-supply = <&pp3500_a_vbob>; +}; + +/* + * NON-REGULATOR OVERRIDES + * (modifications to sdm845-cheza.dtsi) - alphabetized by dtsi label + */ + +/* PINCTRL - board-specific pinctrl */ + +&tlmm { + gpio-line-names = "AP_SPI_FP_MISO", + "AP_SPI_FP_MOSI", + "AP_SPI_FP_CLK", + "AP_SPI_FP_CS_L", + "UART_AP_TX_DBG_RX", + "UART_DBG_TX_AP_RX", + "", + "FP_RST_L", + "FCAM_EN", + "", + "EDP_BRIJ_IRQ", + "EC_IN_RW_ODL", + "", + "RCAM_MCLK", + "FCAM_MCLK", + "", + "RCAM_EN", + "CCI0_SDA", + "CCI0_SCL", + "CCI1_SDA", + "CCI1_SCL", + "FCAM_RST_L", + "", + "PEN_RST_L", + "PEN_IRQ_L", + "", + "RCAM_VSYNC", + "ESIM_MISO", + "ESIM_MOSI", + "ESIM_CLK", + "ESIM_CS_L", + "AP_PEN_1V8_SDA", + "AP_PEN_1V8_SCL", + "AP_TS_I2C_SDA", + "AP_TS_I2C_SCL", + "RCAM_RST_L", + "", + "AP_EDP_BKLTEN", + "AP_BRD_ID1", + "BOOT_CONFIG_4", + "AMP_IRQ_L", + "EDP_BRIJ_I2C_SDA", + "EDP_BRIJ_I2C_SCL", + "EN_PP3300_DX_EDP", + "SD_CD_ODL", + "BT_UART_RTS", + "BT_UART_CTS", + "BT_UART_RXD", + "BT_UART_TXD", + "AMP_I2C_SDA", + "AMP_I2C_SCL", + "AP_BRD_ID3", + "", + "AP_EC_SPI_CLK", + "AP_EC_SPI_CS_L", + "AP_EC_SPI_MISO", + "AP_EC_SPI_MOSI", + "FORCED_USB_BOOT", + "AMP_BCLK", + "AMP_LRCLK", + "AMP_DOUT", + "AMP_DIN", + "AP_BRD_ID2", + "PEN_PDCT_L", + "HP_MCLK", + "HP_BCLK", + "HP_LRCLK", + "HP_DOUT", + "HP_DIN", + "", + "", + "", + "", + "BT_SLIMBUS_DATA", + "BT_SLIMBUS_CLK", + "AMP_RESET_L", + "", + "FCAM_VSYNC", + "", + "AP_SKU_ID1", + "EC_WOV_BCLK", + "EC_WOV_LRCLK", + "EC_WOV_DOUT", + "", + "", + "AP_H1_SPI_MISO", + "AP_H1_SPI_MOSI", + "AP_H1_SPI_CLK", + "AP_H1_SPI_CS_L", + "", + "AP_SPI_CS0_L", + "AP_SPI_MOSI", + "AP_SPI_MISO", + "", + "", + "AP_SPI_CLK", + "", + "RFFE6_CLK", + "RFFE6_DATA", + "BOOT_CONFIG_1", + "BOOT_CONFIG_2", + "BOOT_CONFIG_0", + "EDP_BRIJ_EN", + "", + "USB_HS_TX_EN", + "UIM2_DATA", + "UIM2_CLK", + "UIM2_RST", + "UIM2_PRESENT", + "UIM1_DATA", + "UIM1_CLK", + "UIM1_RST", + "", + "AP_SKU_ID2", + "SDM_GRFC_8", + "SDM_GRFC_9", + "AP_RST_REQ", + "HP_IRQ", + "TS_RESET_L", + "PEN_EJECT_ODL", + "HUB_RST_L", + "FP_TO_AP_IRQ", + "AP_EC_INT_L", + "", + "", + "TS_INT_L", + "AP_SUSPEND_L", + "SDM_GRFC_3", + "", + "H1_AP_INT_ODL", + "QLINK_REQ", + "QLINK_EN", + "SDM_GRFC_2", + "BOOT_CONFIG_3", + "WMSS_RESET_L", + "SDM_GRFC_0", + "SDM_GRFC_1", + "RFFE3_DATA", + "RFFE3_CLK", + "RFFE4_DATA", + "RFFE4_CLK", + "RFFE5_DATA", + "RFFE5_CLK", + "GNSS_EN", + "WCI2_LTE_COEX_RXD", + "WCI2_LTE_COEX_TXD", + "AP_RAM_ID1", + "AP_RAM_ID2", + "RFFE1_DATA", + "RFFE1_CLK"; +}; diff --git a/dts/src/arm64/qcom/sdm845-cheza-r2.dts b/dts/src/arm64/qcom/sdm845-cheza-r2.dts new file mode 100644 index 0000000000..2b7230594e --- /dev/null +++ b/dts/src/arm64/qcom/sdm845-cheza-r2.dts @@ -0,0 +1,238 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Cheza board device tree source + * + * Copyright 2018 Google LLC. + */ + +/dts-v1/; + +#include "sdm845-cheza.dtsi" + +/ { + model = "Google Cheza (rev2)"; + compatible = "google,cheza-rev2", "qcom,sdm845"; + + /* + * FIXED REGULATORS (not in sdm845-cheza.dtsi) - parents above children + */ + + /* + * NOTE: Technically pp3500_a is not the exact same signal as + * pp3500_a_vbob (there's a load switch between them and the EC can + * control pp3500_a via "en_pp3300_a"), but from the AP's point of + * view they are the same. + */ + pp3500_a: + pp3500_a_vbob: pp3500-a-vbob-regulator { + compatible = "regulator-fixed"; + regulator-name = "vreg_bob"; + + /* + * Comes on automatically when pp5000_ldo comes on, which + * comes on automatically when ppvar_sys comes on + */ + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3500000>; + regulator-max-microvolt = <3500000>; + + vin-supply = <&ppvar_sys>; + }; + + pp3300_dx_edp: pp3300-dx-edp-regulator { + /* Yes, it's really 3.5 despite the name of the signal */ + regulator-min-microvolt = <3500000>; + regulator-max-microvolt = <3500000>; + + vin-supply = <&pp3500_a>; + }; +}; + +/* FIXED REGULATOR OVERRIDES (modifications to sdm845-cheza.dtsi) */ + +/* + * L19 and L28 technically go to 3.3V, but most boards have old AOP firmware + * that limits them to 3.0, and trying to run at 3.3V with that old firmware + * prevents the system from booting. + */ +&src_pp3000_l19a { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; +}; + +&src_pp3300_l22a { + /delete-property/regulator-boot-on; + /delete-property/regulator-always-on; +}; + +&src_pp3300_l28a { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; +}; + +&src_vreg_bob { + regulator-min-microvolt = <3500000>; + regulator-max-microvolt = <3500000>; + vin-supply = <&pp3500_a_vbob>; +}; + +/* + * NON-REGULATOR OVERRIDES + * (modifications to sdm845-cheza.dtsi) - alphabetized by dtsi label + */ + +/* PINCTRL - board-specific pinctrl */ + +&tlmm { + gpio-line-names = "AP_SPI_FP_MISO", + "AP_SPI_FP_MOSI", + "AP_SPI_FP_CLK", + "AP_SPI_FP_CS_L", + "UART_AP_TX_DBG_RX", + "UART_DBG_TX_AP_RX", + "BRIJ_SUSPEND", + "FP_RST_L", + "FCAM_EN", + "", + "EDP_BRIJ_IRQ", + "EC_IN_RW_ODL", + "", + "RCAM_MCLK", + "FCAM_MCLK", + "", + "RCAM_EN", + "CCI0_SDA", + "CCI0_SCL", + "CCI1_SDA", + "CCI1_SCL", + "FCAM_RST_L", + "FPMCU_BOOT0", + "PEN_RST_L", + "PEN_IRQ_L", + "FPMCU_SEL_OD", + "RCAM_VSYNC", + "ESIM_MISO", + "ESIM_MOSI", + "ESIM_CLK", + "ESIM_CS_L", + "AP_PEN_1V8_SDA", + "AP_PEN_1V8_SCL", + "AP_TS_I2C_SDA", + "AP_TS_I2C_SCL", + "RCAM_RST_L", + "", + "AP_EDP_BKLTEN", + "AP_BRD_ID1", + "BOOT_CONFIG_4", + "AMP_IRQ_L", + "EDP_BRIJ_I2C_SDA", + "EDP_BRIJ_I2C_SCL", + "EN_PP3300_DX_EDP", + "SD_CD_ODL", + "BT_UART_RTS", + "BT_UART_CTS", + "BT_UART_RXD", + "BT_UART_TXD", + "AMP_I2C_SDA", + "AMP_I2C_SCL", + "AP_BRD_ID3", + "", + "AP_EC_SPI_CLK", + "AP_EC_SPI_CS_L", + "AP_EC_SPI_MISO", + "AP_EC_SPI_MOSI", + "FORCED_USB_BOOT", + "AMP_BCLK", + "AMP_LRCLK", + "AMP_DOUT", + "AMP_DIN", + "AP_BRD_ID2", + "PEN_PDCT_L", + "HP_MCLK", + "HP_BCLK", + "HP_LRCLK", + "HP_DOUT", + "HP_DIN", + "", + "", + "", + "", + "BT_SLIMBUS_DATA", + "BT_SLIMBUS_CLK", + "AMP_RESET_L", + "", + "FCAM_VSYNC", + "", + "AP_SKU_ID1", + "EC_WOV_BCLK", + "EC_WOV_LRCLK", + "EC_WOV_DOUT", + "", + "", + "AP_H1_SPI_MISO", + "AP_H1_SPI_MOSI", + "AP_H1_SPI_CLK", + "AP_H1_SPI_CS_L", + "", + "AP_SPI_CS0_L", + "AP_SPI_MOSI", + "AP_SPI_MISO", + "", + "", + "AP_SPI_CLK", + "", + "RFFE6_CLK", + "RFFE6_DATA", + "BOOT_CONFIG_1", + "BOOT_CONFIG_2", + "BOOT_CONFIG_0", + "EDP_BRIJ_EN", + "", + "USB_HS_TX_EN", + "UIM2_DATA", + "UIM2_CLK", + "UIM2_RST", + "UIM2_PRESENT", + "UIM1_DATA", + "UIM1_CLK", + "UIM1_RST", + "", + "AP_SKU_ID2", + "SDM_GRFC_8", + "SDM_GRFC_9", + "AP_RST_REQ", + "HP_IRQ", + "TS_RESET_L", + "PEN_EJECT_ODL", + "HUB_RST_L", + "FP_TO_AP_IRQ", + "AP_EC_INT_L", + "", + "", + "TS_INT_L", + "AP_SUSPEND_L", + "SDM_GRFC_3", + "", + "H1_AP_INT_ODL", + "QLINK_REQ", + "QLINK_EN", + "SDM_GRFC_2", + "BOOT_CONFIG_3", + "WMSS_RESET_L", + "SDM_GRFC_0", + "SDM_GRFC_1", + "RFFE3_DATA", + "RFFE3_CLK", + "RFFE4_DATA", + "RFFE4_CLK", + "RFFE5_DATA", + "RFFE5_CLK", + "GNSS_EN", + "WCI2_LTE_COEX_RXD", + "WCI2_LTE_COEX_TXD", + "AP_RAM_ID1", + "AP_RAM_ID2", + "RFFE1_DATA", + "RFFE1_CLK"; +}; diff --git a/dts/src/arm64/qcom/sdm845-cheza-r3.dts b/dts/src/arm64/qcom/sdm845-cheza-r3.dts new file mode 100644 index 0000000000..1ba67be08f --- /dev/null +++ b/dts/src/arm64/qcom/sdm845-cheza-r3.dts @@ -0,0 +1,174 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Cheza board device tree source + * + * Copyright 2018 Google LLC. + */ + +/dts-v1/; + +#include "sdm845-cheza.dtsi" + +/ { + model = "Google Cheza (rev3+)"; + compatible = "google,cheza", "qcom,sdm845"; +}; + +/* PINCTRL - board-specific pinctrl */ + +&tlmm { + gpio-line-names = "AP_SPI_FP_MISO", + "AP_SPI_FP_MOSI", + "AP_SPI_FP_CLK", + "AP_SPI_FP_CS_L", + "UART_AP_TX_DBG_RX", + "UART_DBG_TX_AP_RX", + "BRIJ_SUSPEND", + "FP_RST_L", + "FCAM_EN", + "", + "EDP_BRIJ_IRQ", + "EC_IN_RW_ODL", + "", + "RCAM_MCLK", + "FCAM_MCLK", + "", + "RCAM_EN", + "CCI0_SDA", + "CCI0_SCL", + "CCI1_SDA", + "CCI1_SCL", + "FCAM_RST_L", + "FPMCU_BOOT0", + "PEN_RST_L", + "PEN_IRQ_L", + "FPMCU_SEL_OD", + "RCAM_VSYNC", + "ESIM_MISO", + "ESIM_MOSI", + "ESIM_CLK", + "ESIM_CS_L", + "AP_PEN_1V8_SDA", + "AP_PEN_1V8_SCL", + "AP_TS_I2C_SDA", + "AP_TS_I2C_SCL", + "RCAM_RST_L", + "", + "AP_EDP_BKLTEN", + "AP_BRD_ID0", + "BOOT_CONFIG_4", + "AMP_IRQ_L", + "EDP_BRIJ_I2C_SDA", + "EDP_BRIJ_I2C_SCL", + "EN_PP3300_DX_EDP", + "SD_CD_ODL", + "BT_UART_RTS", + "BT_UART_CTS", + "BT_UART_RXD", + "BT_UART_TXD", + "AMP_I2C_SDA", + "AMP_I2C_SCL", + "AP_BRD_ID2", + "", + "AP_EC_SPI_CLK", + "AP_EC_SPI_CS_L", + "AP_EC_SPI_MISO", + "AP_EC_SPI_MOSI", + "FORCED_USB_BOOT", + "AMP_BCLK", + "AMP_LRCLK", + "AMP_DOUT", + "AMP_DIN", + "AP_BRD_ID1", + "PEN_PDCT_L", + "HP_MCLK", + "HP_BCLK", + "HP_LRCLK", + "HP_DOUT", + "HP_DIN", + "", + "", + "", + "", + "BT_SLIMBUS_DATA", + "BT_SLIMBUS_CLK", + "AMP_RESET_L", + "", + "FCAM_VSYNC", + "", + "AP_SKU_ID0", + "EC_WOV_BCLK", + "EC_WOV_LRCLK", + "EC_WOV_DOUT", + "", + "", + "AP_H1_SPI_MISO", + "AP_H1_SPI_MOSI", + "AP_H1_SPI_CLK", + "AP_H1_SPI_CS_L", + "", + "AP_SPI_CS0_L", + "AP_SPI_MOSI", + "AP_SPI_MISO", + "", + "", + "AP_SPI_CLK", + "", + "RFFE6_CLK", + "RFFE6_DATA", + "BOOT_CONFIG_1", + "BOOT_CONFIG_2", + "BOOT_CONFIG_0", + "EDP_BRIJ_EN", + "", + "USB_HS_TX_EN", + "UIM2_DATA", + "UIM2_CLK", + "UIM2_RST", + "UIM2_PRESENT", + "UIM1_DATA", + "UIM1_CLK", + "UIM1_RST", + "", + "AP_SKU_ID1", + "SDM_GRFC_8", + "SDM_GRFC_9", + "AP_RST_REQ", + "HP_IRQ", + "TS_RESET_L", + "PEN_EJECT_ODL", + "HUB_RST_L", + "FP_TO_AP_IRQ", + "AP_EC_INT_L", + "", + "", + "TS_INT_L", + "AP_SUSPEND_L", + "SDM_GRFC_3", + /* + * AP_FLASH_WP_L is crossystem ABI. Rev3 schematics + * call it BIOS_FLASH_WP_R_L. + */ + "AP_FLASH_WP_L", + "H1_AP_INT_ODL", + "QLINK_REQ", + "QLINK_EN", + "SDM_GRFC_2", + "BOOT_CONFIG_3", + "WMSS_RESET_L", + "SDM_GRFC_0", + "SDM_GRFC_1", + "RFFE3_DATA", + "RFFE3_CLK", + "RFFE4_DATA", + "RFFE4_CLK", + "RFFE5_DATA", + "RFFE5_CLK", + "GNSS_EN", + "WCI2_LTE_COEX_RXD", + "WCI2_LTE_COEX_TXD", + "AP_RAM_ID0", + "AP_RAM_ID1", + "RFFE1_DATA", + "RFFE1_CLK"; +}; diff --git a/dts/src/arm64/qcom/sdm845-cheza.dtsi b/dts/src/arm64/qcom/sdm845-cheza.dtsi new file mode 100644 index 0000000000..1ebbd568df --- /dev/null +++ b/dts/src/arm64/qcom/sdm845-cheza.dtsi @@ -0,0 +1,1326 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Cheza device tree source (common between revisions) + * + * Copyright 2018 Google LLC. + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "sdm845.dtsi" + +/* PMICs depend on spmi_bus label and so must come after SoC */ +#include "pm8005.dtsi" +#include "pm8998.dtsi" + +/ { + aliases { + bluetooth0 = &bluetooth; + hsuart0 = &uart6; + serial0 = &uart9; + wifi0 = &wifi; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&cros_ec_pwm 0>; + enable-gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>; + power-supply = <&ppvar_sys>; + pinctrl-names = "default"; + pinctrl-0 = <&ap_edp_bklten>; + }; + + /* FIXED REGULATORS - parents above children */ + + /* This is the top level supply and variable voltage */ + ppvar_sys: ppvar-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "ppvar_sys"; + regulator-always-on; + regulator-boot-on; + }; + + /* This divides ppvar_sys by 2, so voltage is variable */ + src_vph_pwr: src-vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "src_vph_pwr"; + + /* EC turns on with switchcap_on_l; always on for AP */ + regulator-always-on; + regulator-boot-on; + + vin-supply = <&ppvar_sys>; + }; + + pp5000_a: pp5000-a-regulator { + compatible = "regulator-fixed"; + regulator-name = "pp5000_a"; + + /* EC turns on with en_pp5000_a; always on for AP */ + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + vin-supply = <&ppvar_sys>; + }; + + src_vreg_bob: src-vreg-bob-regulator { + compatible = "regulator-fixed"; + regulator-name = "src_vreg_bob"; + + /* EC turns on with vbob_en; always on for AP */ + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3600000>; + regulator-max-microvolt = <3600000>; + + vin-supply = <&ppvar_sys>; + }; + + pp3300_dx_edp: pp3300-dx-edp-regulator { + compatible = "regulator-fixed"; + regulator-name = "pp3300_dx_edp"; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 43 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&en_pp3300_dx_edp>; + }; + + /* + * Apparently RPMh does not provide support for PM8998 S4 because it + * is always-on; model it as a fixed regulator. + */ + src_pp1800_s4a: pm8998-smps4 { + compatible = "regulator-fixed"; + regulator-name = "src_pp1800_s4a"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-always-on; + regulator-boot-on; + + vin-supply = <&src_vph_pwr>; + }; + + /* BOARD-SPECIFIC TOP LEVEL NODES */ + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pen_eject_odl>; + + pen-insert { + label = "Pen Insert"; + /* Insert = low, eject = high */ + gpios = <&tlmm 119 GPIO_ACTIVE_LOW>; + linux,code = <SW_PEN_INSERTED>; + linux,input-type = <EV_SW>; + wakeup-source; + }; + }; + + panel: panel { + compatible ="innolux,p120zdg-bf1"; + power-supply = <&pp3300_dx_edp>; + backlight = <&backlight>; + no-hpd; + + ports { + panel_in: port { + panel_in_edp: endpoint { + remote-endpoint = <&sn65dsi86_out>; + }; + }; + }; + }; +}; + +/* + * Reserved memory changes + * + * Putting this all together (out of order with the rest of the file) to keep + * all modifications to the memory map (from sdm845.dtsi) in one place. + */ + +/* + * Our mpss_region is 8MB bigger than the default one and that conflicts + * with venus_mem and cdsp_mem. + * + * For venus_mem we'll delete and re-create at a different address. + * + * cdsp_mem isn't used on cheza right now so we won't bother re-creating it; but + * that also means we need to delete cdsp_pas. + */ +/delete-node/ &venus_mem; +/delete-node/ &cdsp_mem; +/delete-node/ &cdsp_pas; + +/* Increase the size from 120 MB to 128 MB */ +&mpss_region { + reg = <0 0x8e000000 0 0x8000000>; +}; + +/* Increase the size from 2MB to 8MB */ +&rmtfs_mem { + reg = <0 0x88f00000 0 0x800000>; +}; + +/ { + reserved-memory { + venus_mem: memory@96000000 { + reg = <0 0x96000000 0 0x500000>; + no-map; + }; + }; +}; + +&qspi { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&qspi_clk &qspi_cs0 &qspi_data01>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + + /* + * In theory chip supports up to 104 MHz and controller up + * to 80 MHz, but above 25 MHz wasn't reliable so we'll use + * that for now. b:117440651 + */ + spi-max-frequency = <25000000>; + spi-tx-bus-width = <2>; + spi-rx-bus-width = <2>; + }; +}; + + +&apps_rsc { + pm8998-rpmh-regulators { + compatible = "qcom,pm8998-rpmh-regulators"; + qcom,pmic-id = "a"; + + vdd-s1-supply = <&src_vph_pwr>; + vdd-s2-supply = <&src_vph_pwr>; + vdd-s3-supply = <&src_vph_pwr>; + vdd-s4-supply = <&src_vph_pwr>; + vdd-s5-supply = <&src_vph_pwr>; + vdd-s6-supply = <&src_vph_pwr>; + vdd-s7-supply = <&src_vph_pwr>; + vdd-s8-supply = <&src_vph_pwr>; + vdd-s9-supply = <&src_vph_pwr>; + vdd-s10-supply = <&src_vph_pwr>; + vdd-s11-supply = <&src_vph_pwr>; + vdd-s12-supply = <&src_vph_pwr>; + vdd-s13-supply = <&src_vph_pwr>; + vdd-l1-l27-supply = <&src_pp1025_s7a>; + vdd-l2-l8-l17-supply = <&src_pp1350_s3a>; + vdd-l3-l11-supply = <&src_pp1025_s7a>; + vdd-l4-l5-supply = <&src_pp1025_s7a>; + vdd-l6-supply = <&src_vph_pwr>; + vdd-l7-l12-l14-l15-supply = <&src_pp2040_s5a>; + vdd-l9-supply = <&src_pp2040_s5a>; + vdd-l10-l23-l25-supply = <&src_vreg_bob>; + vdd-l13-l19-l21-supply = <&src_vreg_bob>; + vdd-l16-l28-supply = <&src_vreg_bob>; + vdd-l18-l22-supply = <&src_vreg_bob>; + vdd-l20-l24-supply = <&src_vreg_bob>; + vdd-l26-supply = <&src_pp1350_s3a>; + vin-lvs-1-2-supply = <&src_pp1800_s4a>; + + src_pp1125_s2a: smps2 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + }; + + src_pp1350_s3a: smps3 { + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + }; + + src_pp2040_s5a: smps5 { + regulator-min-microvolt = <1904000>; + regulator-max-microvolt = <2040000>; + }; + + src_pp1025_s7a: smps7 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1028000>; + }; + + vdd_qusb_hs0: + vdda_hp_pcie_core: + vdda_mipi_csi0_0p9: + vdda_mipi_csi1_0p9: + vdda_mipi_csi2_0p9: + vdda_mipi_dsi0_pll: + vdda_mipi_dsi1_pll: + vdda_qlink_lv: + vdda_qlink_lv_ck: + vdda_qrefs_0p875: + vdda_pcie_core: + vdda_pll_cc_ebi01: + vdda_pll_cc_ebi23: + vdda_sp_sensor: + vdda_ufs1_core: + vdda_ufs2_core: + vdda_usb1_ss_core: + vdda_usb2_ss_core: + src_pp875_l1a: ldo1 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vddpx_10: + src_pp1200_l2a: ldo2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + + /* TODO: why??? */ + regulator-always-on; + }; + + pp1000_l3a_sdr845: ldo3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdd_wcss_cx: + vdd_wcss_mx: + vdda_wcss_pll: + src_pp800_l5a: ldo5 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vddpx_13: + src_pp1800_l6a: ldo6 { + regulator-min-microvolt = <1856000>; + regulator-max-microvolt = <1856000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pp1800_l7a_wcn3990: ldo7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + src_pp1200_l8a: ldo8 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1248000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pp1800_dx_pen: + src_pp1800_l9a: ldo9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + src_pp1800_l10a: ldo10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pp1000_l11a_sdr845: ldo11 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1048000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdd_qfprom: + vdd_qfprom_sp: + vdda_apc1_cs_1p8: + vdda_gfx_cs_1p8: + vdda_qrefs_1p8: + vdda_qusb_hs0_1p8: + vddpx_11: + src_pp1800_l12a: ldo12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vddpx_2: + src_pp2950_l13a: ldo13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + src_pp1800_l14a: ldo14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + src_pp1800_l15a: ldo15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pp2700_l16a: ldo16 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2704000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + src_pp1300_l17a: ldo17 { + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pp2700_l18a: ldo18 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + /* + * NOTE: this rail should have been called + * src_pp3300_l19a in the schematic + */ + src_pp3000_l19a: ldo19 { + regulator-min-microvolt = <3304000>; + regulator-max-microvolt = <3304000>; + + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + src_pp2950_l20a: ldo20 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + src_pp2950_l21a: ldo21 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pp3300_hub: + src_pp3300_l22a: ldo22 { + regulator-min-microvolt = <3304000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + /* + * HACK: Should add a usb hub node and driver + * to turn this on and off at suspend/resume time + */ + regulator-boot-on; + regulator-always-on; + }; + + pp3300_l23a_ch1_wcn3990: ldo23 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdda_qusb_hs0_3p1: + src_pp3075_l24a: ldo24 { + regulator-min-microvolt = <3088000>; + regulator-max-microvolt = <3088000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pp3300_l25a_ch0_wcn3990: ldo25 { + regulator-min-microvolt = <3304000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pp1200_hub: + vdda_hp_pcie_1p2: + vdda_hv_ebi0: + vdda_hv_ebi1: + vdda_hv_ebi2: + vdda_hv_ebi3: + vdda_mipi_csi_1p25: + vdda_mipi_dsi0_1p2: + vdda_mipi_dsi1_1p2: + vdda_pcie_1p2: + vdda_ufs1_1p2: + vdda_ufs2_1p2: + vdda_usb1_ss_1p2: + vdda_usb2_ss_1p2: + src_pp1200_l26a: ldo26 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pp3300_dx_pen: + src_pp3300_l28a: ldo28 { + regulator-min-microvolt = <3304000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + src_pp1800_lvs1: lvs1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + src_pp1800_lvs2: lvs2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + }; + + pm8005-rpmh-regulators { + compatible = "qcom,pm8005-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s1-supply = <&src_vph_pwr>; + vdd-s2-supply = <&src_vph_pwr>; + vdd-s3-supply = <&src_vph_pwr>; + vdd-s4-supply = <&src_vph_pwr>; + + src_pp600_s3c: smps3 { + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <600000>; + }; + }; +}; + +&dsi0 { + status = "okay"; + vdda-supply = <&vdda_mipi_dsi0_1p2>; + + ports { + port@1 { + endpoint { + remote-endpoint = <&sn65dsi86_in>; + data-lanes = <0 1 2 3>; + }; + }; + }; +}; + +&dsi0_phy { + status = "okay"; + vdds-supply = <&vdda_mipi_dsi0_pll>; +}; + +edp_brij_i2c: &i2c3 { + status = "okay"; + clock-frequency = <400000>; + + sn65dsi86_bridge: bridge@2d { + compatible = "ti,sn65dsi86"; + reg = <0x2d>; + pinctrl-names = "default"; + pinctrl-0 = <&edp_brij_en &edp_brij_irq>; + + interrupt-parent = <&tlmm>; + interrupts = <10 IRQ_TYPE_LEVEL_HIGH>; + + enable-gpios = <&tlmm 102 GPIO_ACTIVE_HIGH>; + + vpll-supply = <&src_pp1800_s4a>; + vccio-supply = <&src_pp1800_s4a>; + vcca-supply = <&src_pp1200_l2a>; + vcc-supply = <&src_pp1200_l2a>; + + clocks = <&rpmhcc RPMH_LN_BB_CLK2>; + clock-names = "refclk"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + sn65dsi86_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + sn65dsi86_out: endpoint { + remote-endpoint = <&panel_in_edp>; + }; + }; + }; + }; +}; + +ap_pen_1v8: &i2c11 { + status = "okay"; + clock-frequency = <400000>; + + digitizer@9 { + compatible = "wacom,w9013", "hid-over-i2c"; + reg = <0x9>; + pinctrl-names = "default"; + pinctrl-0 = <&pen_irq_l>, <&pen_pdct_l>, <&pen_rst_l>; + + vdd-supply = <&pp3300_dx_pen>; + vddl-supply = <&pp1800_dx_pen>; + post-power-on-delay-ms = <100>; + + interrupt-parent = <&tlmm>; + interrupts = <24 IRQ_TYPE_LEVEL_LOW>; + + hid-descr-addr = <0x1>; + }; +}; + +amp_i2c: &i2c12 { + status = "okay"; + clock-frequency = <400000>; +}; + +ap_ts_i2c: &i2c14 { + status = "okay"; + clock-frequency = <400000>; + + touchscreen@10 { + compatible = "elan,ekth3500"; + reg = <0x10>; + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_l &ts_reset_l>; + + interrupt-parent = <&tlmm>; + interrupts = <125 IRQ_TYPE_LEVEL_LOW>; + + vcc33-supply = <&src_pp3300_l28a>; + + reset-gpios = <&tlmm 118 GPIO_ACTIVE_LOW>; + }; +}; + +&lpasscc { + status = "okay"; +}; + +&mdss { + status = "okay"; +}; + +&mdss_mdp { + status = "okay"; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&sdhc_2 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&sdc2_clk &sdc2_cmd &sdc2_data &sd_cd_odl>; + + vmmc-supply = <&src_pp2950_l21a>; + vqmmc-supply = <&vddpx_2>; + + cd-gpios = <&tlmm 44 GPIO_ACTIVE_LOW>; +}; + +&spi0 { + status = "okay"; +}; + +&spi10 { + status = "okay"; + + cros_ec: ec@0 { + compatible = "google,cros-ec-spi"; + reg = <0>; + interrupt-parent = <&tlmm>; + interrupts = <122 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&ec_ap_int_l>; + spi-max-frequency = <3000000>; + + cros_ec_pwm: ec-pwm { + compatible = "google,cros-ec-pwm"; + #pwm-cells = <1>; + }; + + i2c_tunnel: i2c-tunnel { + compatible = "google,cros-ec-i2c-tunnel"; + google,remote-bus = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + pdupdate { + compatible = "google,cros-ec-pd-update"; + }; + }; +}; + +#include <arm/cros-ec-keyboard.dtsi> +#include <arm/cros-ec-sbs.dtsi> + +&uart6 { + status = "okay"; + + bluetooth: wcn3990-bt { + compatible = "qcom,wcn3990-bt"; + vddio-supply = <&src_pp1800_s4a>; + vddxo-supply = <&pp1800_l7a_wcn3990>; + vddrf-supply = <&src_pp1300_l17a>; + vddch0-supply = <&pp3300_l25a_ch0_wcn3990>; + max-speed = <3200000>; + }; +}; + +&uart9 { + status = "okay"; +}; + +&ufs_mem_hc { + status = "okay"; + pinctrl-names = "init", "default"; + pinctrl-0 = <&ufs_dev_reset_assert>; + pinctrl-1 = <&ufs_dev_reset_deassert>; + + vcc-supply = <&src_pp2950_l20a>; + vcc-max-microamp = <600000>; +}; + +&ufs_mem_phy { + status = "okay"; + + vdda-phy-supply = <&vdda_ufs1_core>; + vdda-pll-supply = <&vdda_ufs1_1p2>; +}; + +&usb_1 { + status = "okay"; + + /* We'll use this as USB 2.0 only */ + qcom,select-utmi-as-pipe-clk; +}; + +&usb_1_dwc3 { + /* + * The hardware design intends this port to be hooked up in peripheral + * mode, so we'll hardcode it here. Some details: + * - SDM845 expects only a single Type C connector so it has only one + * native Type C port but cheza has two Type C connectors. + * - The only source of DP is the single native Type C port. + * - On cheza we want to be able to hook DP up to _either_ of the + * two Type C connectors and want to be able to achieve 4 lanes of DP. + * - When you configure a Type C port for 4 lanes of DP you lose USB3. + * - In order to make everything work, the native Type C port is always + * configured as 4-lanes DP so it's always available. + * - The extra USB3 port on SDM845 goes to a USB 3 hub which is then + * sent to the two Type C connectors. + * - The extra USB2 lines from the native Type C port are always + * setup as "peripheral" so that we can mux them over to one connector + * or the other if someone needs the connector configured as a gadget + * (but they only get USB2 speeds). + * + * All the hardware muxes would allow us to hook things up in different + * ways to some potential benefit for static configurations (you could + * achieve extra USB2 bandwidth by using two different ports for the + * two conenctors or possibly even get USB3 peripheral mode), but in + * each case you end up forcing to disconnect/reconnect an in-use + * USB session in some cases depending on what you hotplug into the + * other connector. Thus hardcoding this as peripheral makes sense. + */ + dr_mode = "peripheral"; + + /* + * We always need the high speed pins as 4-lanes DP in case someone + * hotplugs a DP peripheral. Thus limit this port to a max of high + * speed. + */ + maximum-speed = "high-speed"; + + /* + * We don't need the usb3-phy since we run in highspeed mode always, so + * re-define these properties removing the superspeed USB PHY reference. + */ + phys = <&usb_1_hsphy>; + phy-names = "usb2-phy"; +}; + +&usb_1_hsphy { + status = "okay"; + + vdd-supply = <&vdda_usb1_ss_core>; + vdda-pll-supply = <&vdda_qusb_hs0_1p8>; + vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>; + + qcom,imp-res-offset-value = <8>; + qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>; + qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>; + qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>; +}; + +&usb_2 { + status = "okay"; +}; + +&usb_2_dwc3 { + /* We have this hooked up to a hub and we always use in host mode */ + dr_mode = "host"; +}; + +&usb_2_hsphy { + status = "okay"; + + vdd-supply = <&vdda_usb2_ss_core>; + vdda-pll-supply = <&vdda_qusb_hs0_1p8>; + vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>; + + qcom,imp-res-offset-value = <8>; + qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_22_8_MA>; +}; + +&usb_2_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vdda_usb2_ss_1p2>; + vdda-pll-supply = <&vdda_usb2_ss_core>; +}; + +&wifi { + status = "okay"; + + vdd-0.8-cx-mx-supply = <&src_pp800_l5a >; + vdd-1.8-xo-supply = <&pp1800_l7a_wcn3990>; + vdd-1.3-rfa-supply = <&src_pp1300_l17a>; + vdd-3.3-ch0-supply = <&pp3300_l25a_ch0_wcn3990>; +}; + +/* PINCTRL - additions to nodes defined in sdm845.dtsi */ + +&qspi_cs0 { + pinconf { + pins = "gpio90"; + bias-disable; + }; +}; + +&qspi_clk { + pinconf { + pins = "gpio95"; + bias-disable; + }; +}; + +&qspi_data01 { + pinconf { + pins = "gpio91", "gpio92"; + + /* High-Z when no transfers; nice to park the lines */ + bias-pull-up; + }; +}; + +&qup_i2c3_default { + pinconf { + pins = "gpio41", "gpio42"; + drive-strength = <2>; + + /* Has external pullup */ + bias-disable; + }; +}; + +&qup_i2c11_default { + pinconf { + pins = "gpio31", "gpio32"; + drive-strength = <2>; + + /* Has external pullup */ + bias-disable; + }; +}; + +&qup_i2c12_default { + pinconf { + pins = "gpio49", "gpio50"; + drive-strength = <2>; + + /* Has external pullup */ + bias-disable; + }; +}; + +&qup_i2c14_default { + pinconf { + pins = "gpio33", "gpio34"; + drive-strength = <2>; + + /* Has external pullup */ + bias-disable; + }; +}; + +&qup_spi0_default { + pinconf { + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + drive-strength = <2>; + bias-disable; + }; +}; + +&qup_spi5_default { + pinconf { + pins = "gpio85", "gpio86", "gpio87", "gpio88"; + drive-strength = <2>; + bias-disable; + }; +}; + +&qup_spi10_default { + pinconf { + pins = "gpio53", "gpio54", "gpio55", "gpio56"; + drive-strength = <2>; + bias-disable; + }; +}; + +&qup_uart6_default { + /* Change pinmux to all 4 pins since CTS and RTS are connected */ + pinmux { + pins = "gpio45", "gpio46", + "gpio47", "gpio48"; + }; + + pinconf-cts { + /* + * Configure a pull-down on 45 (CTS) to match the pull of + * the Bluetooth module. + */ + pins = "gpio45"; + bias-pull-down; + }; + + pinconf-rts-tx { + /* We'll drive 46 (RTS) and 47 (TX), so no pull */ + pins = "gpio46", "gpio47"; + drive-strength = <2>; + bias-disable; + }; + + pinconf-rx { + /* + * Configure a pull-up on 48 (RX). This is needed to avoid + * garbage data when the TX pin of the Bluetooth module is + * in tri-state (module powered off or not driving the + * signal yet). + */ + pins = "gpio48"; + bias-pull-up; + }; +}; + +&qup_uart9_default { + pinconf-tx { + pins = "gpio4"; + drive-strength = <2>; + bias-disable; + }; + + pinconf-rx { + pins = "gpio5"; + drive-strength = <2>; + bias-pull-up; + }; +}; + +/* PINCTRL - board-specific pinctrl */ +&pm8005_gpio { + gpio-line-names = "", + "", + "SLB", + ""; +}; + +&pm8998_adc { + adc-chan@ADC5_AMUX_THM1_100K_PU { + reg = <ADC5_AMUX_THM1_100K_PU>; + label = "sdm_temp"; + }; + + adc-chan@ADC5_AMUX_THM2_100K_PU { + reg = <ADC5_AMUX_THM2_100K_PU>; + label = "quiet_temp"; + }; + + adc-chan@ADC5_AMUX_THM3_100K_PU { + reg = <ADC5_AMUX_THM3_100K_PU>; + label = "lte_temp_1"; + }; + + adc-chan@ADC5_AMUX_THM4_100K_PU { + reg = <ADC5_AMUX_THM4_100K_PU>; + label = "lte_temp_2"; + }; + + adc-chan@ADC5_AMUX_THM5_100K_PU { + reg = <ADC5_AMUX_THM5_100K_PU>; + label = "charger_temp"; + }; +}; + +&pm8998_gpio { + gpio-line-names = "", + "", + "SW_CTRL", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "CFG_OPT1", + "WCSS_PWR_REQ", + "", + "CFG_OPT2", + "SLB"; +}; + +&tlmm { + /* + * pinctrl settings for pins that have no real owners. + */ + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&bios_flash_wp_r_l>, + <&ap_suspend_l_deassert>; + + pinctrl-1 = <&bios_flash_wp_r_l>, + <&ap_suspend_l_assert>; + + /* + * Hogs prevent usermode from changing the value. A GPIO can be both + * here and in the pinctrl section. + */ + ap-suspend-l-hog { + gpio-hog; + gpios = <126 GPIO_ACTIVE_LOW>; + output-low; + }; + + ap_edp_bklten: ap-edp-bklten { + pinmux { + pins = "gpio37"; + function = "gpio"; + }; + + pinconf { + pins = "gpio37"; + drive-strength = <2>; + bias-disable; + }; + }; + + bios_flash_wp_r_l: bios-flash-wp-r-l { + pinmux { + pins = "gpio128"; + function = "gpio"; + input-enable; + }; + + pinconf { + pins = "gpio128"; + bias-disable; + }; + }; + + ec_ap_int_l: ec-ap-int-l { + pinmux { + pins = "gpio122"; + function = "gpio"; + input-enable; + }; + + pinconf { + pins = "gpio122"; + bias-pull-up; + }; + }; + + edp_brij_en: edp-brij-en { + pinmux { + pins = "gpio102"; + function = "gpio"; + }; + + pinconf { + pins = "gpio102"; + drive-strength = <2>; + bias-disable; + }; + }; + + edp_brij_irq: edp-brij-irq { + pinmux { + pins = "gpio10"; + function = "gpio"; + }; + + pinconf { + pins = "gpio10"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + en_pp3300_dx_edp: en-pp3300-dx-edp { + pinmux { + pins = "gpio43"; + function = "gpio"; + }; + + pinconf { + pins = "gpio43"; + drive-strength = <2>; + bias-disable; + }; + }; + + h1_ap_int_odl: h1-ap-int-odl { + pinmux { + pins = "gpio129"; + function = "gpio"; + input-enable; + }; + + pinconf { + pins = "gpio129"; + bias-pull-up; + }; + }; + + pen_eject_odl: pen-eject-odl { + pinmux { + pins = "gpio119"; + function = "gpio"; + bias-pull-up; + }; + }; + + pen_irq_l: pen-irq-l { + pinmux { + pins = "gpio24"; + function = "gpio"; + }; + + pinconf { + pins = "gpio24"; + + /* Has external pullup */ + bias-disable; + }; + }; + + pen_pdct_l: pen-pdct-l { + pinmux { + pins = "gpio63"; + function = "gpio"; + }; + + pinconf { + pins = "gpio63"; + + /* Has external pullup */ + bias-disable; + }; + }; + + pen_rst_l: pen-rst-l { + pinmux { + pins = "gpio23"; + function = "gpio"; + }; + + pinconf { + pins = "gpio23"; + bias-disable; + drive-strength = <2>; + + /* + * The pen driver doesn't currently support + * driving this reset line. By specifying + * output-high here we're relying on the fact + * that this pin has a default pulldown at boot + * (which makes sure the pen was in reset if it + * was powered) and then we set it high here to + * take it out of reset. Better would be if the + * pen driver could control this and we could + * remove "output-high" here. + */ + output-high; + }; + }; + + sdc2_clk: sdc2-clk { + pinconf { + pins = "sdc2_clk"; + bias-disable; + + /* + * It seems that mmc_test reports errors if drive + * strength is not 16. + */ + drive-strength = <16>; + }; + }; + + sdc2_cmd: sdc2-cmd { + pinconf { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <16>; + }; + }; + + sdc2_data: sdc2-data { + pinconf { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <16>; + }; + }; + + sd_cd_odl: sd-cd-odl { + pinmux { + pins = "gpio44"; + function = "gpio"; + }; + + pinconf { + pins = "gpio44"; + bias-pull-up; + }; + }; + + ts_int_l: ts-int-l { + pinmux { + pins = "gpio125"; + function = "gpio"; + }; + + pinconf { + pins = "gpio125"; + bias-pull-up; + }; + }; + + ts_reset_l: ts-reset-l { + pinmux { + pins = "gpio118"; + function = "gpio"; + }; + + pinconf { + pins = "gpio118"; + bias-disable; + drive-strength = <2>; + }; + }; + + ufs_dev_reset_assert: ufs_dev_reset_assert { + config { + pins = "ufs_reset"; + bias-pull-down; /* default: pull down */ + /* + * UFS_RESET driver strengths are having + * different values/steps compared to typical + * GPIO drive strengths. + * + * Following table clarifies: + * + * HDRV value | UFS_RESET | Typical GPIO + * (dec) | (mA) | (mA) + * 0 | 0.8 | 2 + * 1 | 1.55 | 4 + * 2 | 2.35 | 6 + * 3 | 3.1 | 8 + * 4 | 3.9 | 10 + * 5 | 4.65 | 12 + * 6 | 5.4 | 14 + * 7 | 6.15 | 16 + * + * POR value for UFS_RESET HDRV is 3 which means + * 3.1mA and we want to use that. Hence just + * specify 8mA to "drive-strength" binding and + * that should result into writing 3 to HDRV + * field. + */ + drive-strength = <8>; /* default: 3.1 mA */ + output-low; /* active low reset */ + }; + }; + + ufs_dev_reset_deassert: ufs_dev_reset_deassert { + config { + pins = "ufs_reset"; + bias-pull-down; /* default: pull down */ + /* + * default: 3.1 mA + * check comments under ufs_dev_reset_assert + */ + drive-strength = <8>; + output-high; /* active low reset */ + }; + }; + + ap_suspend_l_assert: ap_suspend_l_assert { + config { + pins = "gpio126"; + function = "gpio"; + bias-no-pull; + drive-strength = <2>; + output-low; + }; + }; + + ap_suspend_l_deassert: ap_suspend_l_deassert { + config { + pins = "gpio126"; + function = "gpio"; + bias-no-pull; + drive-strength = <2>; + output-high; + }; + }; +}; diff --git a/dts/src/arm64/qcom/sdm845-db845c.dts b/dts/src/arm64/qcom/sdm845-db845c.dts new file mode 100644 index 0000000000..71bd717a42 --- /dev/null +++ b/dts/src/arm64/qcom/sdm845-db845c.dts @@ -0,0 +1,557 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2019, Linaro Ltd. + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "sdm845.dtsi" +#include "pm8998.dtsi" +#include "pmi8998.dtsi" + +/ { + model = "Thundercomm Dragonboard 845c"; + compatible = "thundercomm,db845c", "qcom,sdm845"; + + aliases { + serial0 = &uart9; + hsuart0 = &uart6; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + dc12v: dc12v-regulator { + compatible = "regulator-fixed"; + regulator-name = "DC12V"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + }; + + gpio_keys { + compatible = "gpio-keys"; + autorepeat; + + pinctrl-names = "default"; + pinctrl-0 = <&vol_up_pin_a>; + + vol-up { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>; + }; + }; + + leds { + compatible = "gpio-leds"; + + user4 { + label = "green:user4"; + gpios = <&pm8998_gpio 13 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "panic-indicator"; + default-state = "off"; + }; + + wlan { + label = "yellow:wlan"; + gpios = <&pm8998_gpio 9 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy0tx"; + default-state = "off"; + }; + + bt { + label = "blue:bt"; + gpios = <&pm8998_gpio 5 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "bluetooth-power"; + default-state = "off"; + }; + }; + + lt9611_1v8: lt9611-vdd18-regulator { + compatible = "regulator-fixed"; + regulator-name = "LT9611_1V8"; + + vin-supply = <&vdc_5v>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&tlmm 89 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + lt9611_3v3: lt9611-3v3 { + compatible = "regulator-fixed"; + regulator-name = "LT9611_3V3"; + + vin-supply = <&vdc_3v3>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + // TODO: make it possible to drive same GPIO from two clients + // gpio = <&tlmm 89 GPIO_ACTIVE_HIGH>; + // enable-active-high; + }; + + pcie0_1p05v: pcie-0-1p05v-regulator { + compatible = "regulator-fixed"; + regulator-name = "PCIE0_1.05V"; + + vin-supply = <&vbat>; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + + // TODO: make it possible to drive same GPIO from two clients + // gpio = <&tlmm 90 GPIO_ACTIVE_HIGH>; + // enable-active-high; + }; + + pcie0_3p3v_dual: vldo-3v3-regulator { + compatible = "regulator-fixed"; + regulator-name = "VLDO_3V3"; + + vin-supply = <&vbat>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 90 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie0_pwren_state>; + }; + + v5p0_hdmiout: v5p0-hdmiout-regulator { + compatible = "regulator-fixed"; + regulator-name = "V5P0_HDMIOUT"; + + vin-supply = <&vdc_5v>; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <500000>; + + // TODO: make it possible to drive same GPIO from two clients + // gpio = <&tlmm 89 GPIO_ACTIVE_HIGH>; + // enable-active-high; + }; + + vbat: vbat-regulator { + compatible = "regulator-fixed"; + regulator-name = "VBAT"; + + vin-supply = <&dc12v>; + regulator-min-microvolt = <4200000>; + regulator-max-microvolt = <4200000>; + regulator-always-on; + }; + + vbat_som: vbat-som-regulator { + compatible = "regulator-fixed"; + regulator-name = "VBAT_SOM"; + + vin-supply = <&dc12v>; + regulator-min-microvolt = <4200000>; + regulator-max-microvolt = <4200000>; + regulator-always-on; + }; + + vdc_3v3: vdc-3v3-regulator { + compatible = "regulator-fixed"; + regulator-name = "VDC_3V3"; + vin-supply = <&dc12v>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdc_5v: vdc-5v-regulator { + compatible = "regulator-fixed"; + regulator-name = "VDC_5V"; + + vin-supply = <&dc12v>; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <500000>; + regulator-always-on; + }; + + vreg_s4a_1p8: vreg-s4a-1p8 { + compatible = "regulator-fixed"; + regulator-name = "vreg_s4a_1p8"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + + vin-supply = <&vbat_som>; + }; +}; + +&adsp_pas { + status = "okay"; + + firmware-name = "qcom/db845c/adsp.mdt"; +}; + +&apps_rsc { + pm8998-rpmh-regulators { + compatible = "qcom,pm8998-rpmh-regulators"; + qcom,pmic-id = "a"; + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + vdd-s11-supply = <&vph_pwr>; + vdd-s12-supply = <&vph_pwr>; + vdd-s13-supply = <&vph_pwr>; + vdd-l1-l27-supply = <&vreg_s7a_1p025>; + vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>; + vdd-l3-l11-supply = <&vreg_s7a_1p025>; + vdd-l4-l5-supply = <&vreg_s7a_1p025>; + vdd-l6-supply = <&vph_pwr>; + vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>; + vdd-l9-supply = <&vreg_bob>; + vdd-l10-l23-l25-supply = <&vreg_bob>; + vdd-l13-l19-l21-supply = <&vreg_bob>; + vdd-l16-l28-supply = <&vreg_bob>; + vdd-l18-l22-supply = <&vreg_bob>; + vdd-l20-l24-supply = <&vreg_bob>; + vdd-l26-supply = <&vreg_s3a_1p35>; + vin-lvs-1-2-supply = <&vreg_s4a_1p8>; + + vreg_s3a_1p35: smps3 { + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + }; + + vreg_s5a_2p04: smps5 { + regulator-min-microvolt = <1904000>; + regulator-max-microvolt = <2040000>; + }; + + vreg_s7a_1p025: smps7 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1028000>; + }; + + vreg_l1a_0p875: ldo1 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5a_0p8: ldo5 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12a_1p8: ldo12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7a_1p8: ldo7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13a_2p95: ldo13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l17a_1p3: ldo17 { + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l20a_2p95: ldo20 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2968000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l21a_2p95: ldo21 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2968000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l24a_3p075: ldo24 { + regulator-min-microvolt = <3088000>; + regulator-max-microvolt = <3088000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l25a_3p3: ldo25 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l26a_1p2: ldo26 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + pmi8998-rpmh-regulators { + compatible = "qcom,pmi8998-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-bob-supply = <&vph_pwr>; + + vreg_bob: bob { + regulator-min-microvolt = <3312000>; + regulator-max-microvolt = <3600000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + regulator-allow-bypass; + }; + }; +}; + +&cdsp_pas { + status = "okay"; + firmware-name = "qcom/db845c/cdsp.mdt"; +}; + +&gcc { + protected-clocks = <GCC_QSPI_CORE_CLK>, + <GCC_QSPI_CORE_CLK_SRC>, + <GCC_QSPI_CNOC_PERIPH_AHB_CLK>; +}; + +&pm8998_gpio { + vol_up_pin_a: vol-up-active { + pins = "gpio6"; + function = "normal"; + input-enable; + bias-pull-up; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; + }; +}; + +&pm8998_pon { + resin { + compatible = "qcom,pm8941-resin"; + interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = <KEY_VOLUMEDOWN>; + }; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&sdhc_2 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&sdc2_default_state &sdc2_card_det_n>; + + vmmc-supply = <&vreg_l21a_2p95>; + vqmmc-supply = <&vreg_l13a_2p95>; + + bus-width = <4>; + cd-gpios = <&tlmm 126 GPIO_ACTIVE_LOW>; +}; + +&tlmm { + pcie0_pwren_state: pcie0-pwren { + pins = "gpio90"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + sdc2_default_state: sdc2-default { + clk { + pins = "sdc2_clk"; + bias-disable; + + /* + * It seems that mmc_test reports errors if drive + * strength is not 16 on clk, cmd, and data pins. + */ + drive-strength = <16>; + }; + + cmd { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + + data { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <10>; + }; + }; + + sdc2_card_det_n: sd-card-det-n { + pins = "gpio126"; + function = "gpio"; + bias-pull-up; + }; +}; + +&uart6 { + status = "okay"; + + bluetooth { + compatible = "qcom,wcn3990-bt"; + + vddio-supply = <&vreg_s4a_1p8>; + vddxo-supply = <&vreg_l7a_1p8>; + vddrf-supply = <&vreg_l17a_1p3>; + vddch0-supply = <&vreg_l25a_3p3>; + max-speed = <3200000>; + }; +}; + +&uart9 { + status = "okay"; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "peripheral"; +}; + +&usb_1_hsphy { + status = "okay"; + + vdd-supply = <&vreg_l1a_0p875>; + vdda-pll-supply = <&vreg_l12a_1p8>; + vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; + + qcom,imp-res-offset-value = <8>; + qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>; + qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>; + qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>; +}; + +&usb_1_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vreg_l26a_1p2>; + vdda-pll-supply = <&vreg_l1a_0p875>; +}; + +&usb_2 { + status = "okay"; +}; + +&usb_2_dwc3 { + dr_mode = "host"; +}; + +&usb_2_hsphy { + status = "okay"; + + vdd-supply = <&vreg_l1a_0p875>; + vdda-pll-supply = <&vreg_l12a_1p8>; + vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; + + qcom,imp-res-offset-value = <8>; + qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_22_8_MA>; +}; + +&usb_2_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vreg_l26a_1p2>; + vdda-pll-supply = <&vreg_l1a_0p875>; +}; + +&ufs_mem_hc { + status = "okay"; + + vcc-supply = <&vreg_l20a_2p95>; + vcc-max-microamp = <800000>; +}; + +&ufs_mem_phy { + status = "okay"; + + vdda-phy-supply = <&vreg_l1a_0p875>; + vdda-pll-supply = <&vreg_l26a_1p2>; +}; + +&wifi { + status = "okay"; + + vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>; + vdd-1.8-xo-supply = <&vreg_l7a_1p8>; + vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; + vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; +}; + +/* PINCTRL - additions to nodes defined in sdm845.dtsi */ + +&qup_uart6_default { + pinmux { + pins = "gpio45", "gpio46", "gpio47", "gpio48"; + function = "qup6"; + }; + + cts { + pins = "gpio45"; + bias-disable; + }; + + rts-tx { + pins = "gpio46", "gpio47"; + drive-strength = <2>; + bias-disable; + }; + + rx { + pins = "gpio48"; + bias-pull-up; + }; +}; + +&qup_uart9_default { + pinconf-tx { + pins = "gpio4"; + drive-strength = <2>; + bias-disable; + }; + + pinconf-rx { + pins = "gpio5"; + drive-strength = <2>; + bias-pull-up; + }; +}; diff --git a/dts/src/arm64/qcom/sdm845-mtp.dts b/dts/src/arm64/qcom/sdm845-mtp.dts index 02b8357c8c..2e78638eb7 100644 --- a/dts/src/arm64/qcom/sdm845-mtp.dts +++ b/dts/src/arm64/qcom/sdm845-mtp.dts @@ -404,8 +404,8 @@ }; &usb_1_dwc3 { - /* Until we have Type C hooked up we'll force this as host. */ - dr_mode = "host"; + /* Until we have Type C hooked up we'll force this as peripheral. */ + dr_mode = "peripheral"; }; &usb_1_hsphy { diff --git a/dts/src/arm64/qcom/sdm845.dtsi b/dts/src/arm64/qcom/sdm845.dtsi index fcb93300ca..4babff5f19 100644 --- a/dts/src/arm64/qcom/sdm845.dtsi +++ b/dts/src/arm64/qcom/sdm845.dtsi @@ -190,6 +190,9 @@ compatible = "qcom,kryo385"; reg = <0x0 0x0>; enable-method = "psci"; + cpu-idle-states = <&LITTLE_CPU_SLEEP_0 + &LITTLE_CPU_SLEEP_1 + &CLUSTER_SLEEP_0>; capacity-dmips-mhz = <607>; qcom,freq-domain = <&cpufreq_hw 0>; #cooling-cells = <2>; @@ -208,6 +211,9 @@ compatible = "qcom,kryo385"; reg = <0x0 0x100>; enable-method = "psci"; + cpu-idle-states = <&LITTLE_CPU_SLEEP_0 + &LITTLE_CPU_SLEEP_1 + &CLUSTER_SLEEP_0>; capacity-dmips-mhz = <607>; qcom,freq-domain = <&cpufreq_hw 0>; #cooling-cells = <2>; @@ -223,6 +229,9 @@ compatible = "qcom,kryo385"; reg = <0x0 0x200>; enable-method = "psci"; + cpu-idle-states = <&LITTLE_CPU_SLEEP_0 + &LITTLE_CPU_SLEEP_1 + &CLUSTER_SLEEP_0>; capacity-dmips-mhz = <607>; qcom,freq-domain = <&cpufreq_hw 0>; #cooling-cells = <2>; @@ -238,6 +247,9 @@ compatible = "qcom,kryo385"; reg = <0x0 0x300>; enable-method = "psci"; + cpu-idle-states = <&LITTLE_CPU_SLEEP_0 + &LITTLE_CPU_SLEEP_1 + &CLUSTER_SLEEP_0>; capacity-dmips-mhz = <607>; qcom,freq-domain = <&cpufreq_hw 0>; #cooling-cells = <2>; @@ -254,6 +266,9 @@ reg = <0x0 0x400>; enable-method = "psci"; capacity-dmips-mhz = <1024>; + cpu-idle-states = <&BIG_CPU_SLEEP_0 + &BIG_CPU_SLEEP_1 + &CLUSTER_SLEEP_0>; qcom,freq-domain = <&cpufreq_hw 1>; #cooling-cells = <2>; next-level-cache = <&L2_400>; @@ -269,6 +284,9 @@ reg = <0x0 0x500>; enable-method = "psci"; capacity-dmips-mhz = <1024>; + cpu-idle-states = <&BIG_CPU_SLEEP_0 + &BIG_CPU_SLEEP_1 + &CLUSTER_SLEEP_0>; qcom,freq-domain = <&cpufreq_hw 1>; #cooling-cells = <2>; next-level-cache = <&L2_500>; @@ -284,6 +302,9 @@ reg = <0x0 0x600>; enable-method = "psci"; capacity-dmips-mhz = <1024>; + cpu-idle-states = <&BIG_CPU_SLEEP_0 + &BIG_CPU_SLEEP_1 + &CLUSTER_SLEEP_0>; qcom,freq-domain = <&cpufreq_hw 1>; #cooling-cells = <2>; next-level-cache = <&L2_600>; @@ -299,6 +320,9 @@ reg = <0x0 0x700>; enable-method = "psci"; capacity-dmips-mhz = <1024>; + cpu-idle-states = <&BIG_CPU_SLEEP_0 + &BIG_CPU_SLEEP_1 + &CLUSTER_SLEEP_0>; qcom,freq-domain = <&cpufreq_hw 1>; #cooling-cells = <2>; next-level-cache = <&L2_700>; @@ -325,26 +349,78 @@ core3 { cpu = <&CPU3>; }; - }; - cluster1 { - core0 { + core4 { cpu = <&CPU4>; }; - core1 { + core5 { cpu = <&CPU5>; }; - core2 { + core6 { cpu = <&CPU6>; }; - core3 { + core7 { cpu = <&CPU7>; }; }; }; + + idle-states { + entry-method = "psci"; + + LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 { + compatible = "arm,idle-state"; + idle-state-name = "little-power-down"; + arm,psci-suspend-param = <0x40000003>; + entry-latency-us = <350>; + exit-latency-us = <461>; + min-residency-us = <1890>; + local-timer-stop; + }; + + LITTLE_CPU_SLEEP_1: cpu-sleep-0-1 { + compatible = "arm,idle-state"; + idle-state-name = "little-rail-power-down"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <360>; + exit-latency-us = <531>; + min-residency-us = <3934>; + local-timer-stop; + }; + + BIG_CPU_SLEEP_0: cpu-sleep-1-0 { + compatible = "arm,idle-state"; + idle-state-name = "big-power-down"; + arm,psci-suspend-param = <0x40000003>; + entry-latency-us = <264>; + exit-latency-us = <621>; + min-residency-us = <952>; + local-timer-stop; + }; + + BIG_CPU_SLEEP_1: cpu-sleep-1-1 { + compatible = "arm,idle-state"; + idle-state-name = "big-rail-power-down"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <702>; + exit-latency-us = <1061>; + min-residency-us = <4488>; + local-timer-stop; + }; + + CLUSTER_SLEEP_0: cluster-sleep-0 { + compatible = "arm,idle-state"; + idle-state-name = "cluster-power-down"; + arm,psci-suspend-param = <0x400000F4>; + entry-latency-us = <3263>; + exit-latency-us = <6562>; + min-residency-us = <9987>; + local-timer-stop; + }; + }; }; pmu { @@ -1671,6 +1747,64 @@ }; }; + mss_pil: remoteproc@4080000 { + compatible = "qcom,sdm845-mss-pil"; + reg = <0 0x04080000 0 0x408>, <0 0x04180000 0 0x48>; + reg-names = "qdsp6", "rmb"; + + interrupts-extended = + <&intc GIC_SPI 266 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack", + "shutdown-ack"; + + clocks = <&gcc GCC_MSS_CFG_AHB_CLK>, + <&gcc GCC_MSS_Q6_MEMNOC_AXI_CLK>, + <&gcc GCC_BOOT_ROM_AHB_CLK>, + <&gcc GCC_MSS_GPLL0_DIV_CLK_SRC>, + <&gcc GCC_MSS_SNOC_AXI_CLK>, + <&gcc GCC_MSS_MFAB_AXIS_CLK>, + <&gcc GCC_PRNG_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "bus", "mem", "gpll0_mss", + "snoc_axi", "mnoc_axi", "prng", "xo"; + + qcom,smem-states = <&modem_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + resets = <&aoss_reset AOSS_CC_MSS_RESTART>, + <&pdc_reset PDC_MODEM_SYNC_RESET>; + reset-names = "mss_restart", "pdc_reset"; + + qcom,halt-regs = <&tcsr_mutex_regs 0x23000 0x25000 0x24000>; + + power-domains = <&aoss_qmp 2>, + <&rpmhpd SDM845_CX>, + <&rpmhpd SDM845_MX>, + <&rpmhpd SDM845_MSS>; + power-domain-names = "load_state", "cx", "mx", "mss"; + + mba { + memory-region = <&mba_region>; + }; + + mpss { + memory-region = <&mpss_region>; + }; + + glink-edge { + interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>; + label = "modem"; + qcom,remote-pid = <1>; + mboxes = <&apss_shared 12>; + }; + }; + gpucc: clock-controller@5090000 { compatible = "qcom,sdm845-gpucc"; reg = <0 0x05090000 0 0x9000>; @@ -2106,6 +2240,133 @@ }; }; + gpu@5000000 { + compatible = "qcom,adreno-630.2", "qcom,adreno"; + #stream-id-cells = <16>; + + reg = <0 0x5000000 0 0x40000>, <0 0x509e000 0 0x10>; + reg-names = "kgsl_3d0_reg_memory", "cx_mem"; + + /* + * Look ma, no clocks! The GPU clocks and power are + * controlled entirely by the GMU + */ + + interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>; + + iommus = <&adreno_smmu 0>; + + operating-points-v2 = <&gpu_opp_table>; + + qcom,gmu = <&gmu>; + + zap-shader { + memory-region = <&gpu_mem>; + }; + + gpu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-710000000 { + opp-hz = /bits/ 64 <710000000>; + opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>; + }; + + opp-675000000 { + opp-hz = /bits/ 64 <675000000>; + opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; + }; + + opp-596000000 { + opp-hz = /bits/ 64 <596000000>; + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; + }; + + opp-520000000 { + opp-hz = /bits/ 64 <520000000>; + opp-level = <RPMH_REGULATOR_LEVEL_NOM>; + }; + + opp-414000000 { + opp-hz = /bits/ 64 <414000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + }; + + opp-342000000 { + opp-hz = /bits/ 64 <342000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + }; + + opp-257000000 { + opp-hz = /bits/ 64 <257000000>; + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + }; + }; + }; + + adreno_smmu: iommu@5040000 { + compatible = "qcom,sdm845-smmu-v2", "qcom,smmu-v2"; + reg = <0 0x5040000 0 0x10000>; + #iommu-cells = <1>; + #global-interrupts = <2>; + interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 364 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 365 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 366 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 367 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 368 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 369 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 370 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 371 IRQ_TYPE_EDGE_RISING>; + clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>, + <&gcc GCC_GPU_CFG_AHB_CLK>; + clock-names = "bus", "iface"; + + power-domains = <&gpucc GPU_CX_GDSC>; + }; + + gmu: gmu@506a000 { + compatible="qcom,adreno-gmu-630.2", "qcom,adreno-gmu"; + + reg = <0 0x506a000 0 0x30000>, + <0 0xb280000 0 0x10000>, + <0 0xb480000 0 0x10000>; + reg-names = "gmu", "gmu_pdc", "gmu_pdc_seq"; + + interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hfi", "gmu"; + + clocks = <&gpucc GPU_CC_CX_GMU_CLK>, + <&gpucc GPU_CC_CXO_CLK>, + <&gcc GCC_DDRSS_GPU_AXI_CLK>, + <&gcc GCC_GPU_MEMNOC_GFX_CLK>; + clock-names = "gmu", "cxo", "axi", "memnoc"; + + power-domains = <&gpucc GPU_CX_GDSC>, + <&gpucc GPU_GX_GDSC>; + power-domain-names = "cx", "gx"; + + iommus = <&adreno_smmu 5>; + + operating-points-v2 = <&gmu_opp_table>; + + gmu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-400000000 { + opp-hz = /bits/ 64 <400000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + }; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; + }; + }; + }; + dispcc: clock-controller@af00000 { compatible = "qcom,sdm845-dispcc"; reg = <0 0x0af00000 0 0x10000>; @@ -2142,6 +2403,16 @@ #reset-cells = <1>; }; + aoss_qmp: qmp@c300000 { + compatible = "qcom,sdm845-aoss-qmp"; + reg = <0 0x0c300000 0 0x100000>; + interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>; + mboxes = <&apss_shared 0>; + + #clock-cells = <0>; + #power-domain-cells = <1>; + }; + spmi_bus: spmi@c440000 { compatible = "qcom,spmi-pmic-arb"; reg = <0 0x0c440000 0 0x1100>, diff --git a/dts/src/arm64/renesas/hihope-common.dtsi b/dts/src/arm64/renesas/hihope-common.dtsi new file mode 100644 index 0000000000..3311a982ff --- /dev/null +++ b/dts/src/arm64/renesas/hihope-common.dtsi @@ -0,0 +1,325 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the HiHope RZ/G2[MN] main board common parts + * + * Copyright (C) 2019 Renesas Electronics Corp. + */ + +#include <dt-bindings/gpio/gpio.h> + +/ { + aliases { + serial0 = &scif2; + }; + + chosen { + bootargs = "ignore_loglevel"; + stdout-path = "serial0:115200n8"; + }; + + hdmi0-out { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi0_con: endpoint { + remote-endpoint = <&rcar_dw_hdmi0_out>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + + led0 { + gpios = <&gpio6 11 GPIO_ACTIVE_HIGH>; + }; + + led1 { + gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>; + }; + + led2 { + gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>; + }; + + led3 { + gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>; + }; + }; + + reg_1p8v: regulator0 { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_3p3v: regulator1 { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + vbus0_usb2: regulator-vbus0-usb2 { + compatible = "regulator-fixed"; + + regulator-name = "USB20_VBUS0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + gpio = <&gpio6 16 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vccq_sdhi0: regulator-vccq-sdhi0 { + compatible = "regulator-gpio"; + + regulator-name = "SDHI0 VccQ"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpio6 30 GPIO_ACTIVE_HIGH>; + gpios-states = <1>; + states = <3300000 1 + 1800000 0>; + }; + + x302_clk: x302-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <33000000>; + }; + + x304_clk: x304-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; +}; + +&du { + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>, + <&cpg CPG_MOD 722>, + <&versaclock5 1>, + <&x302_clk>, + <&versaclock5 2>; + clock-names = "du.0", "du.1", "du.2", + "dclkin.0", "dclkin.1", "dclkin.2"; + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&extal_clk { + clock-frequency = <16666666>; +}; + +&extalr_clk { + clock-frequency = <32768>; +}; + +&gpio6 { + usb1-reset { + gpio-hog; + gpios = <10 GPIO_ACTIVE_LOW>; + output-low; + line-name = "usb1-reset"; + }; +}; + +&hdmi0 { + status = "okay"; + + ports { + port@1 { + reg = <1>; + rcar_dw_hdmi0_out: endpoint { + remote-endpoint = <&hdmi0_con>; + }; + }; + }; +}; + +&hsusb { + dr_mode = "otg"; + status = "okay"; +}; + +&i2c4 { + clock-frequency = <400000>; + status = "okay"; + + versaclock5: clock-generator@6a { + compatible = "idt,5p49v5923"; + reg = <0x6a>; + #clock-cells = <1>; + clocks = <&x304_clk>; + clock-names = "xin"; + }; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&pcie_bus_clk { + clock-frequency = <100000000>; +}; + +&pfc { + pinctrl-0 = <&scif_clk_pins>; + pinctrl-names = "default"; + + scif2_pins: scif2 { + groups = "scif2_data_a"; + function = "scif2"; + }; + + scif_clk_pins: scif_clk { + groups = "scif_clk_a"; + function = "scif_clk"; + }; + + sdhi0_pins: sd0 { + groups = "sdhi0_data4", "sdhi0_ctrl"; + function = "sdhi0"; + power-source = <3300>; + }; + + sdhi0_pins_uhs: sd0_uhs { + groups = "sdhi0_data4", "sdhi0_ctrl"; + function = "sdhi0"; + power-source = <1800>; + }; + + sdhi3_pins: sd3 { + groups = "sdhi3_data8", "sdhi3_ctrl", "sdhi3_ds"; + function = "sdhi3"; + power-source = <1800>; + }; + + usb0_pins: usb0 { + groups = "usb0"; + function = "usb0"; + }; + + usb1_pins: usb1 { + mux { + groups = "usb1"; + function = "usb1"; + }; + + ovc { + pins = "GP_6_27"; + bias-pull-up; + }; + }; + + usb30_pins: usb30 { + groups = "usb30"; + function = "usb30"; + }; +}; + +&rwdt { + timeout-sec = <60>; + status = "okay"; +}; + +&scif2 { + pinctrl-0 = <&scif2_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&scif_clk { + clock-frequency = <14745600>; +}; + +&sdhi0 { + pinctrl-0 = <&sdhi0_pins>; + pinctrl-1 = <&sdhi0_pins_uhs>; + pinctrl-names = "default", "state_uhs"; + + vmmc-supply = <®_3p3v>; + vqmmc-supply = <&vccq_sdhi0>; + cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>; + bus-width = <4>; + sd-uhs-sdr50; + sd-uhs-sdr104; + status = "okay"; +}; + +&sdhi3 { + pinctrl-0 = <&sdhi3_pins>; + pinctrl-1 = <&sdhi3_pins>; + pinctrl-names = "default", "state_uhs"; + + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_1p8v>; + bus-width = <8>; + mmc-hs200-1_8v; + non-removable; + fixed-emmc-driver-type = <1>; +}; + +&usb_extal_clk { + clock-frequency = <50000000>; +}; + +&usb2_phy0 { + pinctrl-0 = <&usb0_pins>; + pinctrl-names = "default"; + + vbus-supply = <&vbus0_usb2>; + status = "okay"; +}; + +&usb2_phy1 { + pinctrl-0 = <&usb1_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&usb3_peri0 { + phys = <&usb3_phy0>; + phy-names = "usb"; + + companion = <&xhci0>; + + status = "okay"; +}; + +&usb3_phy0 { + status = "okay"; +}; + +&usb3s0_clk { + clock-frequency = <100000000>; +}; + +&xhci0 { + pinctrl-0 = <&usb30_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; diff --git a/dts/src/arm64/renesas/hihope-rzg2-ex.dtsi b/dts/src/arm64/renesas/hihope-rzg2-ex.dtsi new file mode 100644 index 0000000000..07a6eeaed1 --- /dev/null +++ b/dts/src/arm64/renesas/hihope-rzg2-ex.dtsi @@ -0,0 +1,63 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the RZ/G2[MN] HiHope sub board common parts + * + * Copyright (C) 2019 Renesas Electronics Corp. + */ + +/ { + aliases { + ethernet0 = &avb; + }; + + chosen { + bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; + }; +}; + +&avb { + pinctrl-0 = <&avb_pins>; + pinctrl-names = "default"; + phy-handle = <&phy0>; + phy-mode = "rgmii-txid"; + status = "okay"; + + phy0: ethernet-phy@0 { + rxc-skew-ps = <1500>; + reg = <0>; + interrupt-parent = <&gpio2>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>; + }; +}; + +&pciec0 { + status = "okay"; +}; + +&pciec1 { + status = "okay"; +}; + +&pfc { + pinctrl-0 = <&scif_clk_pins>; + pinctrl-names = "default"; + + avb_pins: avb { + mux { + groups = "avb_link", "avb_mdio", "avb_mii"; + function = "avb"; + }; + + pins_mdio { + groups = "avb_mdio"; + drive-strength = <24>; + }; + + pins_mii_tx { + pins = "PIN_AVB_TX_CTL", "PIN_AVB_TXC", "PIN_AVB_TD0", + "PIN_AVB_TD1", "PIN_AVB_TD2", "PIN_AVB_TD3"; + drive-strength = <12>; + }; + }; +}; diff --git a/dts/src/arm64/renesas/r8a774a1-hihope-rzg2m-ex.dts b/dts/src/arm64/renesas/r8a774a1-hihope-rzg2m-ex.dts new file mode 100644 index 0000000000..6e33a3b277 --- /dev/null +++ b/dts/src/arm64/renesas/r8a774a1-hihope-rzg2m-ex.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the HiHope RZ/G2M sub board + * + * Copyright (C) 2019 Renesas Electronics Corp. + */ + +#include "r8a774a1-hihope-rzg2m.dts" +#include "hihope-rzg2-ex.dtsi" + +/ { + model = "HopeRun HiHope RZ/G2M with sub board"; + compatible = "hoperun,hihope-rzg2-ex", "hoperun,hihope-rzg2m", + "renesas,r8a774a1"; +}; diff --git a/dts/src/arm64/renesas/r8a774a1-hihope-rzg2m.dts b/dts/src/arm64/renesas/r8a774a1-hihope-rzg2m.dts new file mode 100644 index 0000000000..93ca973c85 --- /dev/null +++ b/dts/src/arm64/renesas/r8a774a1-hihope-rzg2m.dts @@ -0,0 +1,26 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the HiHope RZ/G2M main board + * + * Copyright (C) 2019 Renesas Electronics Corp. + */ + +/dts-v1/; +#include "r8a774a1.dtsi" +#include "hihope-common.dtsi" + +/ { + model = "HopeRun HiHope RZ/G2M main board based on r8a774a1"; + compatible = "hoperun,hihope-rzg2m", "renesas,r8a774a1"; + + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0x0 0x48000000 0x0 0x78000000>; + }; + + memory@600000000 { + device_type = "memory"; + reg = <0x6 0x00000000 0x0 0x80000000>; + }; +}; diff --git a/dts/src/arm64/renesas/r8a774a1.dtsi b/dts/src/arm64/renesas/r8a774a1.dtsi index de282c4794..f209457c78 100644 --- a/dts/src/arm64/renesas/r8a774a1.dtsi +++ b/dts/src/arm64/renesas/r8a774a1.dtsi @@ -56,10 +56,78 @@ clock-frequency = <0>; }; + cluster0_opp: opp_table0 { + compatible = "operating-points-v2"; + opp-shared; + + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <820000>; + clock-latency-ns = <300000>; + }; + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <820000>; + clock-latency-ns = <300000>; + }; + opp-1500000000 { + opp-hz = /bits/ 64 <1500000000>; + opp-microvolt = <820000>; + clock-latency-ns = <300000>; + }; + }; + + cluster1_opp: opp_table1 { + compatible = "operating-points-v2"; + opp-shared; + + opp-800000000 { + opp-hz = /bits/ 64 <800000000>; + opp-microvolt = <820000>; + clock-latency-ns = <300000>; + }; + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <820000>; + clock-latency-ns = <300000>; + }; + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <820000>; + clock-latency-ns = <300000>; + }; + }; + cpus { #address-cells = <1>; #size-cells = <0>; + cpu-map { + cluster0 { + core0 { + cpu = <&a57_0>; + }; + core1 { + cpu = <&a57_1>; + }; + }; + + cluster1 { + core0 { + cpu = <&a53_0>; + }; + core1 { + cpu = <&a53_1>; + }; + core2 { + cpu = <&a53_2>; + }; + core3 { + cpu = <&a53_3>; + }; + }; + }; + a57_0: cpu@0 { compatible = "arm,cortex-a57"; reg = <0x0>; @@ -67,7 +135,11 @@ power-domains = <&sysc R8A774A1_PD_CA57_CPU0>; next-level-cache = <&L2_CA57>; enable-method = "psci"; + dynamic-power-coefficient = <854>; clocks = <&cpg CPG_CORE R8A774A1_CLK_Z>; + operating-points-v2 = <&cluster0_opp>; + capacity-dmips-mhz = <1024>; + #cooling-cells = <2>; }; a57_1: cpu@1 { @@ -78,6 +150,9 @@ next-level-cache = <&L2_CA57>; enable-method = "psci"; clocks = <&cpg CPG_CORE R8A774A1_CLK_Z>; + operating-points-v2 = <&cluster0_opp>; + capacity-dmips-mhz = <1024>; + #cooling-cells = <2>; }; a53_0: cpu@100 { @@ -87,7 +162,11 @@ power-domains = <&sysc R8A774A1_PD_CA53_CPU0>; next-level-cache = <&L2_CA53>; enable-method = "psci"; + #cooling-cells = <2>; + dynamic-power-coefficient = <277>; clocks = <&cpg CPG_CORE R8A774A1_CLK_Z2>; + operating-points-v2 = <&cluster1_opp>; + capacity-dmips-mhz = <560>; }; a53_1: cpu@101 { @@ -98,6 +177,8 @@ next-level-cache = <&L2_CA53>; enable-method = "psci"; clocks = <&cpg CPG_CORE R8A774A1_CLK_Z2>; + operating-points-v2 = <&cluster1_opp>; + capacity-dmips-mhz = <560>; }; a53_2: cpu@102 { @@ -108,6 +189,8 @@ next-level-cache = <&L2_CA53>; enable-method = "psci"; clocks = <&cpg CPG_CORE R8A774A1_CLK_Z2>; + operating-points-v2 = <&cluster1_opp>; + capacity-dmips-mhz = <560>; }; a53_3: cpu@103 { @@ -118,6 +201,8 @@ next-level-cache = <&L2_CA53>; enable-method = "psci"; clocks = <&cpg CPG_CORE R8A774A1_CLK_Z2>; + operating-points-v2 = <&cluster1_opp>; + capacity-dmips-mhz = <560>; }; L2_CA57: cache-controller-0 { @@ -326,6 +411,76 @@ reg = <0 0xe6060000 0 0x50c>; }; + cmt0: timer@e60f0000 { + compatible = "renesas,r8a774a1-cmt0", + "renesas,rcar-gen3-cmt0"; + reg = <0 0xe60f0000 0 0x1004>; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 303>; + clock-names = "fck"; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; + resets = <&cpg 303>; + status = "disabled"; + }; + + cmt1: timer@e6130000 { + compatible = "renesas,r8a774a1-cmt1", + "renesas,rcar-gen3-cmt1"; + reg = <0 0xe6130000 0 0x1004>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 302>; + clock-names = "fck"; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; + resets = <&cpg 302>; + status = "disabled"; + }; + + cmt2: timer@e6140000 { + compatible = "renesas,r8a774a1-cmt1", + "renesas,rcar-gen3-cmt1"; + reg = <0 0xe6140000 0 0x1004>; + interrupts = <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 301>; + clock-names = "fck"; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; + resets = <&cpg 301>; + status = "disabled"; + }; + + cmt3: timer@e6148000 { + compatible = "renesas,r8a774a1-cmt1", + "renesas,rcar-gen3-cmt1"; + reg = <0 0xe6148000 0 0x1004>; + interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 300>; + clock-names = "fck"; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; + resets = <&cpg 300>; + status = "disabled"; + }; + cpg: clock-controller@e6150000 { compatible = "renesas,r8a774a1-cpg-mssr"; reg = <0 0xe6150000 0 0x0bb0>; @@ -377,6 +532,71 @@ resets = <&cpg 407>; }; + tmu0: timer@e61e0000 { + compatible = "renesas,tmu-r8a774a1", "renesas,tmu"; + reg = <0 0xe61e0000 0 0x30>; + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 125>; + clock-names = "fck"; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; + resets = <&cpg 125>; + status = "disabled"; + }; + + tmu1: timer@e6fc0000 { + compatible = "renesas,tmu-r8a774a1", "renesas,tmu"; + reg = <0 0xe6fc0000 0 0x30>; + interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 124>; + clock-names = "fck"; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; + resets = <&cpg 124>; + status = "disabled"; + }; + + tmu2: timer@e6fd0000 { + compatible = "renesas,tmu-r8a774a1", "renesas,tmu"; + reg = <0 0xe6fd0000 0 0x30>; + interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 123>; + clock-names = "fck"; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; + resets = <&cpg 123>; + status = "disabled"; + }; + + tmu3: timer@e6fe0000 { + compatible = "renesas,tmu-r8a774a1", "renesas,tmu"; + reg = <0 0xe6fe0000 0 0x30>; + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 122>; + clock-names = "fck"; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; + resets = <&cpg 122>; + status = "disabled"; + }; + + tmu4: timer@ffc00000 { + compatible = "renesas,tmu-r8a774a1", "renesas,tmu"; + reg = <0 0xffc00000 0 0x30>; + interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 121>; + clock-names = "fck"; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; + resets = <&cpg 121>; + status = "disabled"; + }; + i2c0: i2c@e6500000 { #address-cells = <1>; #size-cells = <0>; @@ -601,15 +821,15 @@ "renesas,rcar-gen3-usbhs"; reg = <0 0xe6590000 0 0x200>; interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 704>; + clocks = <&cpg CPG_MOD 704>, <&cpg CPG_MOD 703>; dmas = <&usb_dmac0 0>, <&usb_dmac0 1>, <&usb_dmac1 0>, <&usb_dmac1 1>; dma-names = "ch0", "ch1", "ch2", "ch3"; renesas,buswait = <11>; - phys = <&usb2_phy0>; + phys = <&usb2_phy0 3>; phy-names = "usb"; power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; - resets = <&cpg 704>; + resets = <&cpg 704>, <&cpg 703>; status = "disabled"; }; @@ -686,6 +906,14 @@ resets = <&cpg 219>; #dma-cells = <1>; dma-channels = <16>; + iommus = <&ipmmu_ds0 0>, <&ipmmu_ds0 1>, + <&ipmmu_ds0 2>, <&ipmmu_ds0 3>, + <&ipmmu_ds0 4>, <&ipmmu_ds0 5>, + <&ipmmu_ds0 6>, <&ipmmu_ds0 7>, + <&ipmmu_ds0 8>, <&ipmmu_ds0 9>, + <&ipmmu_ds0 10>, <&ipmmu_ds0 11>, + <&ipmmu_ds0 12>, <&ipmmu_ds0 13>, + <&ipmmu_ds0 14>, <&ipmmu_ds0 15>; }; dmac1: dma-controller@e7300000 { @@ -720,6 +948,14 @@ resets = <&cpg 218>; #dma-cells = <1>; dma-channels = <16>; + iommus = <&ipmmu_ds1 0>, <&ipmmu_ds1 1>, + <&ipmmu_ds1 2>, <&ipmmu_ds1 3>, + <&ipmmu_ds1 4>, <&ipmmu_ds1 5>, + <&ipmmu_ds1 6>, <&ipmmu_ds1 7>, + <&ipmmu_ds1 8>, <&ipmmu_ds1 9>, + <&ipmmu_ds1 10>, <&ipmmu_ds1 11>, + <&ipmmu_ds1 12>, <&ipmmu_ds1 13>, + <&ipmmu_ds1 14>, <&ipmmu_ds1 15>; }; dmac2: dma-controller@e7310000 { @@ -754,6 +990,14 @@ resets = <&cpg 217>; #dma-cells = <1>; dma-channels = <16>; + iommus = <&ipmmu_ds1 16>, <&ipmmu_ds1 17>, + <&ipmmu_ds1 18>, <&ipmmu_ds1 19>, + <&ipmmu_ds1 20>, <&ipmmu_ds1 21>, + <&ipmmu_ds1 22>, <&ipmmu_ds1 23>, + <&ipmmu_ds1 24>, <&ipmmu_ds1 25>, + <&ipmmu_ds1 26>, <&ipmmu_ds1 27>, + <&ipmmu_ds1 28>, <&ipmmu_ds1 29>, + <&ipmmu_ds1 30>, <&ipmmu_ds1 31>; }; ipmmu_ds0: mmu@e6740000 { @@ -869,6 +1113,7 @@ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; resets = <&cpg 812>; phy-mode = "rgmii"; + iommus = <&ipmmu_ds0 16>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1629,6 +1874,14 @@ resets = <&cpg 502>; #dma-cells = <1>; dma-channels = <16>; + iommus = <&ipmmu_mp 0>, <&ipmmu_mp 1>, + <&ipmmu_mp 2>, <&ipmmu_mp 3>, + <&ipmmu_mp 4>, <&ipmmu_mp 5>, + <&ipmmu_mp 6>, <&ipmmu_mp 7>, + <&ipmmu_mp 8>, <&ipmmu_mp 9>, + <&ipmmu_mp 10>, <&ipmmu_mp 11>, + <&ipmmu_mp 12>, <&ipmmu_mp 13>, + <&ipmmu_mp 14>, <&ipmmu_mp 15>; }; audma1: dma-controller@ec720000 { @@ -1663,6 +1916,14 @@ resets = <&cpg 501>; #dma-cells = <1>; dma-channels = <16>; + iommus = <&ipmmu_mp 16>, <&ipmmu_mp 17>, + <&ipmmu_mp 18>, <&ipmmu_mp 19>, + <&ipmmu_mp 20>, <&ipmmu_mp 21>, + <&ipmmu_mp 22>, <&ipmmu_mp 23>, + <&ipmmu_mp 24>, <&ipmmu_mp 25>, + <&ipmmu_mp 26>, <&ipmmu_mp 27>, + <&ipmmu_mp 28>, <&ipmmu_mp 29>, + <&ipmmu_mp 30>, <&ipmmu_mp 31>; }; xhci0: usb@ee000000 { @@ -1691,11 +1952,11 @@ compatible = "generic-ohci"; reg = <0 0xee080000 0 0x100>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 703>; - phys = <&usb2_phy0>; + clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; + phys = <&usb2_phy0 1>; phy-names = "usb"; power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; - resets = <&cpg 703>; + resets = <&cpg 703>, <&cpg 704>; status = "disabled"; }; @@ -1704,7 +1965,7 @@ reg = <0 0xee0a0000 0 0x100>; interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 702>; - phys = <&usb2_phy1>; + phys = <&usb2_phy1 1>; phy-names = "usb"; power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; resets = <&cpg 702>; @@ -1715,12 +1976,12 @@ compatible = "generic-ehci"; reg = <0 0xee080100 0 0x100>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 703>; - phys = <&usb2_phy0>; + clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; + phys = <&usb2_phy0 2>; phy-names = "usb"; companion = <&ohci0>; power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; - resets = <&cpg 703>; + resets = <&cpg 703>, <&cpg 704>; status = "disabled"; }; @@ -1729,7 +1990,7 @@ reg = <0 0xee0a0100 0 0x100>; interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 702>; - phys = <&usb2_phy1>; + phys = <&usb2_phy1 2>; phy-names = "usb"; companion = <&ohci1>; power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; @@ -1742,10 +2003,10 @@ "renesas,rcar-gen3-usb2-phy"; reg = <0 0xee080200 0 0x700>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 703>; + clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; - resets = <&cpg 703>; - #phy-cells = <0>; + resets = <&cpg 703>, <&cpg 704>; + #phy-cells = <1>; status = "disabled"; }; @@ -1756,7 +2017,7 @@ clocks = <&cpg CPG_MOD 702>; power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; resets = <&cpg 702>; - #phy-cells = <0>; + #phy-cells = <1>; status = "disabled"; }; @@ -1825,6 +2086,70 @@ resets = <&cpg 408>; }; + pciec0: pcie@fe000000 { + compatible = "renesas,pcie-r8a774a1", + "renesas,pcie-rcar-gen3"; + reg = <0 0xfe000000 0 0x80000>; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x00 0xff>; + device_type = "pci"; + ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000 + 0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000 + 0x02000000 0 0x30000000 0 0x30000000 0 0x08000000 + 0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>; + /* Map all possible DDR as inbound ranges */ + dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>; + clock-names = "pcie", "pcie_bus"; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; + resets = <&cpg 319>; + status = "disabled"; + }; + + pciec1: pcie@ee800000 { + compatible = "renesas,pcie-r8a774a1", + "renesas,pcie-rcar-gen3"; + reg = <0 0xee800000 0 0x80000>; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x00 0xff>; + device_type = "pci"; + ranges = <0x01000000 0 0x00000000 0 0xee900000 0 0x00100000 + 0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000 + 0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000 + 0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>; + /* Map all possible DDR as inbound ranges */ + dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>; + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 318>, <&pcie_bus_clk>; + clock-names = "pcie", "pcie_bus"; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; + resets = <&cpg 318>; + status = "disabled"; + }; + + fdp1@fe940000 { + compatible = "renesas,fdp1"; + reg = <0 0xfe940000 0 0x2400>; + interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 119>; + power-domains = <&sysc R8A774A1_PD_A3VC>; + resets = <&cpg 119>; + renesas,fcp = <&fcpf0>; + }; + fcpf0: fcp@fe950000 { compatible = "renesas,fcpf"; reg = <0 0xfe950000 0 0x200>; @@ -1877,6 +2202,61 @@ iommus = <&ipmmu_vc0 19>; }; + vspb: vsp@fe960000 { + compatible = "renesas,vsp2"; + reg = <0 0xfe960000 0 0x8000>; + interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 626>; + power-domains = <&sysc R8A774A1_PD_A3VC>; + resets = <&cpg 626>; + + renesas,fcp = <&fcpvb0>; + }; + + vspd0: vsp@fea20000 { + compatible = "renesas,vsp2"; + reg = <0 0xfea20000 0 0x5000>; + interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 623>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; + resets = <&cpg 623>; + + renesas,fcp = <&fcpvd0>; + }; + + vspd1: vsp@fea28000 { + compatible = "renesas,vsp2"; + reg = <0 0xfea28000 0 0x5000>; + interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 622>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; + resets = <&cpg 622>; + + renesas,fcp = <&fcpvd1>; + }; + + vspd2: vsp@fea30000 { + compatible = "renesas,vsp2"; + reg = <0 0xfea30000 0 0x5000>; + interrupts = <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 621>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; + resets = <&cpg 621>; + + renesas,fcp = <&fcpvd2>; + }; + + vspi0: vsp@fe9a0000 { + compatible = "renesas,vsp2"; + reg = <0 0xfe9a0000 0 0x8000>; + interrupts = <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 631>; + power-domains = <&sysc R8A774A1_PD_A3VC>; + resets = <&cpg 631>; + + renesas,fcp = <&fcpvi0>; + }; + csi20: csi2@fea80000 { compatible = "renesas,r8a774a1-csi2"; reg = <0 0xfea80000 0 0x10000>; @@ -1988,6 +2368,101 @@ }; }; + hdmi0: hdmi@fead0000 { + compatible = "renesas,r8a774a1-hdmi", + "renesas,rcar-gen3-hdmi"; + reg = <0 0xfead0000 0 0x10000>; + interrupts = <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 729>, + <&cpg CPG_CORE R8A774A1_CLK_HDMI>; + clock-names = "iahb", "isfr"; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; + resets = <&cpg 729>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + dw_hdmi0_in: endpoint { + remote-endpoint = <&du_out_hdmi0>; + }; + }; + port@1 { + reg = <1>; + }; + port@2 { + /* HDMI sound */ + reg = <2>; + }; + }; + }; + + du: display@feb00000 { + compatible = "renesas,du-r8a774a1"; + reg = <0 0xfeb00000 0 0x70000>; + interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>, + <&cpg CPG_MOD 722>; + clock-names = "du.0", "du.1", "du.2"; + status = "disabled"; + + vsps = <&vspd0 &vspd1 &vspd2>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + du_out_rgb: endpoint { + }; + }; + port@1 { + reg = <1>; + du_out_hdmi0: endpoint { + remote-endpoint = <&dw_hdmi0_in>; + }; + }; + port@2 { + reg = <2>; + du_out_lvds0: endpoint { + remote-endpoint = <&lvds0_in>; + }; + }; + }; + }; + + lvds0: lvds@feb90000 { + compatible = "renesas,r8a774a1-lvds"; + reg = <0 0xfeb90000 0 0x14>; + clocks = <&cpg CPG_MOD 727>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; + resets = <&cpg 727>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + lvds0_in: endpoint { + remote-endpoint = <&du_out_lvds0>; + }; + }; + port@1 { + reg = <1>; + lvds0_out: endpoint { + }; + }; + }; + }; + prr: chipid@fff00044 { compatible = "renesas,prr"; reg = <0 0xfff00044 0 4>; @@ -1999,6 +2474,7 @@ polling-delay-passive = <250>; polling-delay = <1000>; thermal-sensors = <&tsc 0>; + sustainable-power = <3874>; trips { sensor1_crit: sensor1-crit { @@ -2013,6 +2489,7 @@ polling-delay-passive = <250>; polling-delay = <1000>; thermal-sensors = <&tsc 1>; + sustainable-power = <3874>; trips { sensor2_crit: sensor2-crit { @@ -2021,21 +2498,39 @@ type = "critical"; }; }; - }; sensor_thermal3: sensor-thermal3 { polling-delay-passive = <250>; polling-delay = <1000>; thermal-sensors = <&tsc 2>; + sustainable-power = <3874>; trips { + target: trip-point1 { + temperature = <100000>; + hysteresis = <1000>; + type = "passive"; + }; + sensor3_crit: sensor3-crit { temperature = <120000>; hysteresis = <1000>; type = "critical"; }; }; + cooling-maps { + map0 { + trip = <&target>; + cooling-device = <&a57_0 0 2>; + contribution = <1024>; + }; + map1 { + trip = <&target>; + cooling-device = <&a53_0 0 2>; + contribution = <1024>; + }; + }; }; }; diff --git a/dts/src/arm64/renesas/r8a774c0-cat874.dts b/dts/src/arm64/renesas/r8a774c0-cat874.dts index 013a48c012..46a77eefa5 100644 --- a/dts/src/arm64/renesas/r8a774c0-cat874.dts +++ b/dts/src/arm64/renesas/r8a774c0-cat874.dts @@ -8,6 +8,7 @@ /dts-v1/; #include "r8a774c0.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/display/tda998x.h> / { model = "Silicon Linux RZ/G2E 96board platform (CAT874)"; @@ -15,13 +16,25 @@ aliases { serial0 = &scif2; + serial1 = &hscif2; }; chosen { - bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; + bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; stdout-path = "serial0:115200n8"; }; + hdmi-out { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_out: endpoint { + remote-endpoint = <&tda19988_out>; + }; + }; + }; + leds { compatible = "gpio-leds"; @@ -52,6 +65,23 @@ reg = <0x0 0x48000000 0x0 0x78000000>; }; + sound: sound { + compatible = "simple-audio-card"; + + simple-audio-card,name = "CAT874 HDMI sound"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&sndcpu>; + simple-audio-card,frame-master = <&sndcpu>; + + sndcpu: simple-audio-card,cpu { + sound-dai = <&rcar_sound>; + }; + + sndcodec: simple-audio-card,codec { + sound-dai = <&tda19988>; + }; + }; + vcc_sdhi0: regulator-vcc-sdhi0 { compatible = "regulator-fixed"; @@ -74,6 +104,46 @@ states = <3300000 1 1800000 0>; }; + + wlan_en_reg: fixedregulator { + compatible = "regulator-fixed"; + regulator-name = "wlan-en-regulator"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + startup-delay-us = <70000>; + + gpio = <&gpio2 25 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + x13_clk: x13 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <74250000>; + }; +}; + +&audio_clk_a { + clock-frequency = <22579200>; +}; + +&du { + pinctrl-0 = <&du_pins>; + pinctrl-names = "default"; + status = "okay"; + + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>, + <&x13_clk>; + clock-names = "du.0", "du.1", "dclkin.0"; + + ports { + port@0 { + endpoint { + remote-endpoint = <&tda19988_in>; + }; + }; + }; }; &ehci0 { @@ -85,6 +155,81 @@ clock-frequency = <48000000>; }; +&hscif2 { + pinctrl-0 = <&hscif2_pins>; + pinctrl-names = "default"; + + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "ti,wl1837-st"; + enable-gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; + }; +}; + +&i2c0 { + status = "okay"; + clock-frequency = <100000>; + + hd3ss3220@47 { + compatible = "ti,hd3ss3220"; + reg = <0x47>; + interrupt-parent = <&gpio6>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + + connector { + compatible = "usb-c-connector"; + label = "USB-C"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + hd3ss3220_ep: endpoint { + remote-endpoint = <&usb3_role_switch>; + }; + }; + }; + }; + }; + + tda19988: tda19988@70 { + compatible = "nxp,tda998x"; + reg = <0x70>; + interrupt-parent = <&gpio1>; + interrupts = <1 IRQ_TYPE_LEVEL_LOW>; + + video-ports = <0x234501>; + + #sound-dai-cells = <0>; + audio-ports = <TDA998x_I2S 0x03>; + clocks = <&rcar_sound 1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + tda19988_in: endpoint { + remote-endpoint = <&du_out_rgb>; + }; + }; + + port@1 { + reg = <1>; + tda19988_out: endpoint { + remote-endpoint = <&hdmi_con_out>; + }; + }; + }; + }; +}; + &i2c1 { pinctrl-0 = <&i2c1_pins>; pinctrl-names = "default"; @@ -98,6 +243,13 @@ }; }; +&lvds0 { + status = "okay"; + + clocks = <&cpg CPG_MOD 727>, <&x13_clk>, <&extal_clk>; + clock-names = "fck", "dclkin.0", "extal"; +}; + &ohci0 { dr_mode = "host"; status = "okay"; @@ -113,11 +265,22 @@ }; &pfc { + du_pins: du { + groups = "du_rgb888", "du_clk_out_0", "du_sync", "du_disp", + "du_clk_in_0"; + function = "du"; + }; + i2c1_pins: i2c1 { groups = "i2c1_b"; function = "i2c1"; }; + hscif2_pins: hscif2 { + groups = "hscif2_data_a", "hscif2_ctrl_a"; + function = "hscif2"; + }; + scif2_pins: scif2 { groups = "scif2_data_a"; function = "scif2"; @@ -134,6 +297,47 @@ function = "sdhi0"; power-source = <1800>; }; + + sdhi3_pins: sd3 { + groups = "sdhi3_data4", "sdhi3_ctrl"; + function = "sdhi3"; + power-source = <1800>; + }; + + sound_pins: sound { + groups = "ssi01239_ctrl", "ssi0_data"; + function = "ssi"; + }; + + sound_clk_pins: sound_clk { + groups = "audio_clkout1_a"; + function = "audio_clk"; + }; + + usb30_pins: usb30 { + groups = "usb30", "usb30_id"; + function = "usb30"; + }; +}; + +&rcar_sound { + pinctrl-0 = <&sound_pins &sound_clk_pins>; + pinctrl-names = "default"; + + /* Single DAI */ + #sound-dai-cells = <0>; + + /* audio_clkout0/1/2/3 */ + #clock-cells = <1>; + clock-frequency = <11289600>; + + status = "okay"; + + rcar_sound,dai { + dai0 { + playback = <&ssi0 &src0 &dvc0>; + }; + }; }; &rwdt { @@ -162,7 +366,47 @@ status = "okay"; }; +&sdhi3 { + status = "okay"; + pinctrl-0 = <&sdhi3_pins>; + pinctrl-names = "default"; + + vmmc-supply = <&wlan_en_reg>; + bus-width = <4>; + non-removable; + cap-power-off-card; + keep-power-in-suspend; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@2 { + compatible = "ti,wl1837"; + reg = <2>; + interrupt-parent = <&gpio1>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + }; +}; + &usb2_phy0 { renesas,no-otg-pins; status = "okay"; }; + +&usb3_peri0 { + companion = <&xhci0>; + status = "okay"; + usb-role-switch; + + port { + usb3_role_switch: endpoint { + remote-endpoint = <&hd3ss3220_ep>; + }; + }; +}; + +&xhci0 { + pinctrl-0 = <&usb30_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; diff --git a/dts/src/arm64/renesas/r8a774c0.dtsi b/dts/src/arm64/renesas/r8a774c0.dtsi index 3f86db199d..e7b5bf23f9 100644 --- a/dts/src/arm64/renesas/r8a774c0.dtsi +++ b/dts/src/arm64/renesas/r8a774c0.dtsi @@ -70,7 +70,7 @@ #size-cells = <0>; a53_0: cpu@0 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0>; device_type = "cpu"; power-domains = <&sysc R8A774C0_PD_CA53_CPU0>; @@ -81,7 +81,7 @@ }; a53_1: cpu@1 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <1>; device_type = "cpu"; power-domains = <&sysc R8A774C0_PD_CA53_CPU1>; @@ -684,7 +684,7 @@ <&usb_dmac1 0>, <&usb_dmac1 1>; dma-names = "ch0", "ch1", "ch2", "ch3"; renesas,buswait = <11>; - phys = <&usb2_phy0>; + phys = <&usb2_phy0 3>; phy-names = "usb"; power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; resets = <&cpg 704>, <&cpg 703>; @@ -1580,7 +1580,7 @@ reg = <0 0xee080000 0 0x100>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; - phys = <&usb2_phy0>; + phys = <&usb2_phy0 1>; phy-names = "usb"; power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; resets = <&cpg 703>, <&cpg 704>; @@ -1592,7 +1592,7 @@ reg = <0 0xee080100 0 0x100>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; - phys = <&usb2_phy0>; + phys = <&usb2_phy0 2>; phy-names = "usb"; companion = <&ohci0>; power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; @@ -1608,7 +1608,7 @@ clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; resets = <&cpg 703>, <&cpg 704>; - #phy-cells = <0>; + #phy-cells = <1>; status = "disabled"; }; diff --git a/dts/src/arm64/renesas/r8a7795.dtsi b/dts/src/arm64/renesas/r8a7795.dtsi index 097538cc4b..1745ac4b30 100644 --- a/dts/src/arm64/renesas/r8a7795.dtsi +++ b/dts/src/arm64/renesas/r8a7795.dtsi @@ -155,6 +155,7 @@ power-domains = <&sysc R8A7795_PD_CA57_CPU0>; next-level-cache = <&L2_CA57>; enable-method = "psci"; + dynamic-power-coefficient = <854>; clocks = <&cpg CPG_CORE R8A7795_CLK_Z>; operating-points-v2 = <&cluster0_opp>; capacity-dmips-mhz = <1024>; @@ -207,6 +208,8 @@ power-domains = <&sysc R8A7795_PD_CA53_CPU0>; next-level-cache = <&L2_CA53>; enable-method = "psci"; + #cooling-cells = <2>; + dynamic-power-coefficient = <277>; clocks = <&cpg CPG_CORE R8A7795_CLK_Z2>; operating-points-v2 = <&cluster1_opp>; capacity-dmips-mhz = <535>; @@ -812,7 +815,7 @@ <&usb_dmac1 0>, <&usb_dmac1 1>; dma-names = "ch0", "ch1", "ch2", "ch3"; renesas,buswait = <11>; - phys = <&usb2_phy0>; + phys = <&usb2_phy0 3>; phy-names = "usb"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 704>, <&cpg 703>; @@ -829,7 +832,7 @@ <&usb_dmac3 0>, <&usb_dmac3 1>; dma-names = "ch0", "ch1", "ch2", "ch3"; renesas,buswait = <11>; - phys = <&usb2_phy3>; + phys = <&usb2_phy3 3>; phy-names = "usb"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 705>, <&cpg 700>; @@ -1450,6 +1453,17 @@ status = "disabled"; }; + tpu: pwm@e6e80000 { + compatible = "renesas,tpu-r8a7795", "renesas,tpu"; + reg = <0 0xe6e80000 0 0x148>; + interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 304>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 304>; + #pwm-cells = <3>; + status = "disabled"; + }; + msiof0: spi@e6e90000 { compatible = "renesas,msiof-r8a7795", "renesas,rcar-gen3-msiof"; @@ -2405,7 +2419,7 @@ reg = <0 0xee080000 0 0x100>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; - phys = <&usb2_phy0>; + phys = <&usb2_phy0 1>; phy-names = "usb"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 703>, <&cpg 704>; @@ -2417,7 +2431,7 @@ reg = <0 0xee0a0000 0 0x100>; interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 702>; - phys = <&usb2_phy1>; + phys = <&usb2_phy1 1>; phy-names = "usb"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 702>; @@ -2429,7 +2443,7 @@ reg = <0 0xee0c0000 0 0x100>; interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 701>; - phys = <&usb2_phy2>; + phys = <&usb2_phy2 1>; phy-names = "usb"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 701>; @@ -2441,7 +2455,7 @@ reg = <0 0xee0e0000 0 0x100>; interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 700>, <&cpg CPG_MOD 705>; - phys = <&usb2_phy3>; + phys = <&usb2_phy3 1>; phy-names = "usb"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 700>, <&cpg 705>; @@ -2453,7 +2467,7 @@ reg = <0 0xee080100 0 0x100>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; - phys = <&usb2_phy0>; + phys = <&usb2_phy0 2>; phy-names = "usb"; companion = <&ohci0>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; @@ -2466,7 +2480,7 @@ reg = <0 0xee0a0100 0 0x100>; interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 702>; - phys = <&usb2_phy1>; + phys = <&usb2_phy1 2>; phy-names = "usb"; companion = <&ohci1>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; @@ -2479,7 +2493,7 @@ reg = <0 0xee0c0100 0 0x100>; interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 701>; - phys = <&usb2_phy2>; + phys = <&usb2_phy2 2>; phy-names = "usb"; companion = <&ohci2>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; @@ -2492,7 +2506,7 @@ reg = <0 0xee0e0100 0 0x100>; interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 700>, <&cpg CPG_MOD 705>; - phys = <&usb2_phy3>; + phys = <&usb2_phy3 2>; phy-names = "usb"; companion = <&ohci3>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; @@ -2508,7 +2522,7 @@ clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 703>, <&cpg 704>; - #phy-cells = <0>; + #phy-cells = <1>; status = "disabled"; }; @@ -2519,7 +2533,7 @@ clocks = <&cpg CPG_MOD 702>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 702>; - #phy-cells = <0>; + #phy-cells = <1>; status = "disabled"; }; @@ -2530,7 +2544,7 @@ clocks = <&cpg CPG_MOD 701>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 701>; - #phy-cells = <0>; + #phy-cells = <1>; status = "disabled"; }; @@ -2542,7 +2556,7 @@ clocks = <&cpg CPG_MOD 700>, <&cpg CPG_MOD 705>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 700>, <&cpg 705>; - #phy-cells = <0>; + #phy-cells = <1>; status = "disabled"; }; @@ -3168,58 +3182,30 @@ polling-delay-passive = <250>; polling-delay = <1000>; thermal-sensors = <&tsc 0>; + sustainable-power = <6313>; trips { - sensor1_passive: sensor1-passive { - temperature = <95000>; - hysteresis = <1000>; - type = "passive"; - }; sensor1_crit: sensor1-crit { temperature = <120000>; hysteresis = <1000>; type = "critical"; }; }; - - cooling-maps { - map0 { - trip = <&sensor1_passive>; - cooling-device = <&a57_0 4 4>, - <&a57_1 4 4>, - <&a57_2 4 4>, - <&a57_3 4 4>; - }; - }; }; sensor_thermal2: sensor-thermal2 { polling-delay-passive = <250>; polling-delay = <1000>; thermal-sensors = <&tsc 1>; + sustainable-power = <6313>; trips { - sensor2_passive: sensor2-passive { - temperature = <95000>; - hysteresis = <1000>; - type = "passive"; - }; sensor2_crit: sensor2-crit { temperature = <120000>; hysteresis = <1000>; type = "critical"; }; }; - - cooling-maps { - map0 { - trip = <&sensor2_passive>; - cooling-device = <&a57_0 4 4>, - <&a57_1 4 4>, - <&a57_2 4 4>, - <&a57_3 4 4>; - }; - }; }; sensor_thermal3: sensor-thermal3 { @@ -3228,11 +3214,12 @@ thermal-sensors = <&tsc 2>; trips { - sensor3_passive: sensor3-passive { - temperature = <95000>; + target: trip-point1 { + temperature = <100000>; hysteresis = <1000>; type = "passive"; }; + sensor3_crit: sensor3-crit { temperature = <120000>; hysteresis = <1000>; @@ -3242,11 +3229,15 @@ cooling-maps { map0 { - trip = <&sensor3_passive>; - cooling-device = <&a57_0 4 4>, - <&a57_1 4 4>, - <&a57_2 4 4>, - <&a57_3 4 4>; + trip = <&target>; + cooling-device = <&a57_0 2 4>; + contribution = <1024>; + }; + + map1 { + trip = <&target>; + cooling-device = <&a53_0 0 2>; + contribution = <1024>; }; }; }; diff --git a/dts/src/arm64/renesas/r8a7796.dtsi b/dts/src/arm64/renesas/r8a7796.dtsi index d5e2f4af83..26df5b88ef 100644 --- a/dts/src/arm64/renesas/r8a7796.dtsi +++ b/dts/src/arm64/renesas/r8a7796.dtsi @@ -160,6 +160,7 @@ power-domains = <&sysc R8A7796_PD_CA57_CPU0>; next-level-cache = <&L2_CA57>; enable-method = "psci"; + dynamic-power-coefficient = <854>; clocks = <&cpg CPG_CORE R8A7796_CLK_Z>; operating-points-v2 = <&cluster0_opp>; capacity-dmips-mhz = <1024>; @@ -186,6 +187,8 @@ power-domains = <&sysc R8A7796_PD_CA53_CPU0>; next-level-cache = <&L2_CA53>; enable-method = "psci"; + #cooling-cells = <2>; + dynamic-power-coefficient = <277>; clocks = <&cpg CPG_CORE R8A7796_CLK_Z2>; operating-points-v2 = <&cluster1_opp>; capacity-dmips-mhz = <535>; @@ -783,7 +786,7 @@ <&usb_dmac1 0>, <&usb_dmac1 1>; dma-names = "ch0", "ch1", "ch2", "ch3"; renesas,buswait = <11>; - phys = <&usb2_phy0>; + phys = <&usb2_phy0 3>; phy-names = "usb"; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; resets = <&cpg 704>, <&cpg 703>; @@ -1319,6 +1322,17 @@ status = "disabled"; }; + tpu: pwm@e6e80000 { + compatible = "renesas,tpu-r8a7796", "renesas,tpu"; + reg = <0 0xe6e80000 0 0x148>; + interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 304>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 304>; + #pwm-cells = <3>; + status = "disabled"; + }; + msiof0: spi@e6e90000 { compatible = "renesas,msiof-r8a7796", "renesas,rcar-gen3-msiof"; @@ -2275,7 +2289,7 @@ reg = <0 0xee080000 0 0x100>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; - phys = <&usb2_phy0>; + phys = <&usb2_phy0 1>; phy-names = "usb"; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; resets = <&cpg 703>, <&cpg 704>; @@ -2287,7 +2301,7 @@ reg = <0 0xee0a0000 0 0x100>; interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 702>; - phys = <&usb2_phy1>; + phys = <&usb2_phy1 1>; phy-names = "usb"; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; resets = <&cpg 702>; @@ -2299,7 +2313,7 @@ reg = <0 0xee080100 0 0x100>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; - phys = <&usb2_phy0>; + phys = <&usb2_phy0 2>; phy-names = "usb"; companion = <&ohci0>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; @@ -2312,7 +2326,7 @@ reg = <0 0xee0a0100 0 0x100>; interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 702>; - phys = <&usb2_phy1>; + phys = <&usb2_phy1 2>; phy-names = "usb"; companion = <&ohci1>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; @@ -2328,7 +2342,7 @@ clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; resets = <&cpg 703>, <&cpg 704>; - #phy-cells = <0>; + #phy-cells = <1>; status = "disabled"; }; @@ -2339,7 +2353,7 @@ clocks = <&cpg CPG_MOD 702>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; resets = <&cpg 702>; - #phy-cells = <0>; + #phy-cells = <1>; status = "disabled"; }; @@ -2814,76 +2828,61 @@ polling-delay-passive = <250>; polling-delay = <1000>; thermal-sensors = <&tsc 0>; + sustainable-power = <3874>; trips { - sensor1_passive: sensor1-passive { - temperature = <95000>; - hysteresis = <1000>; - type = "passive"; - }; sensor1_crit: sensor1-crit { temperature = <120000>; hysteresis = <1000>; type = "critical"; }; }; - - cooling-maps { - map0 { - trip = <&sensor1_passive>; - cooling-device = <&a57_0 5 5>, <&a57_1 5 5>; - }; - }; }; sensor_thermal2: sensor-thermal2 { polling-delay-passive = <250>; polling-delay = <1000>; thermal-sensors = <&tsc 1>; + sustainable-power = <3874>; trips { - sensor2_passive: sensor2-passive { - temperature = <95000>; - hysteresis = <1000>; - type = "passive"; - }; sensor2_crit: sensor2-crit { temperature = <120000>; hysteresis = <1000>; type = "critical"; }; }; - - cooling-maps { - map0 { - trip = <&sensor2_passive>; - cooling-device = <&a57_0 5 5>, <&a57_1 5 5>; - }; - }; }; sensor_thermal3: sensor-thermal3 { polling-delay-passive = <250>; polling-delay = <1000>; thermal-sensors = <&tsc 2>; + sustainable-power = <3874>; trips { - sensor3_passive: sensor3-passive { - temperature = <95000>; + target: trip-point1 { + temperature = <100000>; hysteresis = <1000>; type = "passive"; }; + sensor3_crit: sensor3-crit { temperature = <120000>; hysteresis = <1000>; type = "critical"; }; }; - cooling-maps { map0 { - trip = <&sensor3_passive>; - cooling-device = <&a57_0 5 5>, <&a57_1 5 5>; + trip = <&target>; + cooling-device = <&a57_0 2 4>; + contribution = <1024>; + }; + map1 { + trip = <&target>; + cooling-device = <&a53_0 0 2>; + contribution = <1024>; }; }; }; diff --git a/dts/src/arm64/renesas/r8a77965.dtsi b/dts/src/arm64/renesas/r8a77965.dtsi index 2554b1742d..131f895ab7 100644 --- a/dts/src/arm64/renesas/r8a77965.dtsi +++ b/dts/src/arm64/renesas/r8a77965.dtsi @@ -111,6 +111,8 @@ power-domains = <&sysc R8A77965_PD_CA57_CPU0>; next-level-cache = <&L2_CA57>; enable-method = "psci"; + #cooling-cells = <2>; + dynamic-power-coefficient = <854>; clocks = <&cpg CPG_CORE R8A77965_CLK_Z>; operating-points-v2 = <&cluster0_opp>; }; @@ -667,7 +669,7 @@ <&usb_dmac1 0>, <&usb_dmac1 1>; dma-names = "ch0", "ch1", "ch2", "ch3"; renesas,buswait = <11>; - phys = <&usb2_phy0>; + phys = <&usb2_phy0 3>; phy-names = "usb"; power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; resets = <&cpg 704>, <&cpg 703>; @@ -1195,6 +1197,17 @@ status = "disabled"; }; + tpu: pwm@e6e80000 { + compatible = "renesas,tpu-r8a77965", "renesas,tpu"; + reg = <0 0xe6e80000 0 0x148>; + interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 304>; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + resets = <&cpg 304>; + #pwm-cells = <3>; + status = "disabled"; + }; + msiof0: spi@e6e90000 { compatible = "renesas,msiof-r8a77965", "renesas,rcar-gen3-msiof"; @@ -2015,7 +2028,7 @@ reg = <0 0xee080000 0 0x100>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; - phys = <&usb2_phy0>; + phys = <&usb2_phy0 1>; phy-names = "usb"; power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; resets = <&cpg 703>, <&cpg 704>; @@ -2027,7 +2040,7 @@ reg = <0 0xee0a0000 0 0x100>; interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 702>; - phys = <&usb2_phy1>; + phys = <&usb2_phy1 1>; phy-names = "usb"; power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; resets = <&cpg 702>; @@ -2039,7 +2052,7 @@ reg = <0 0xee080100 0 0x100>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; - phys = <&usb2_phy0>; + phys = <&usb2_phy0 2>; phy-names = "usb"; companion = <&ohci0>; power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; @@ -2052,7 +2065,7 @@ reg = <0 0xee0a0100 0 0x100>; interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 702>; - phys = <&usb2_phy1>; + phys = <&usb2_phy1 2>; phy-names = "usb"; companion = <&ohci1>; power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; @@ -2068,7 +2081,7 @@ clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; resets = <&cpg 703>, <&cpg 704>; - #phy-cells = <0>; + #phy-cells = <1>; status = "disabled"; }; @@ -2079,7 +2092,7 @@ clocks = <&cpg CPG_MOD 702>; power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; resets = <&cpg 702>; - #phy-cells = <0>; + #phy-cells = <1>; status = "disabled"; }; @@ -2519,6 +2532,7 @@ polling-delay-passive = <250>; polling-delay = <1000>; thermal-sensors = <&tsc 0>; + sustainable-power = <2439>; trips { sensor1_crit: sensor1-crit { @@ -2533,6 +2547,7 @@ polling-delay-passive = <250>; polling-delay = <1000>; thermal-sensors = <&tsc 1>; + sustainable-power = <2439>; trips { sensor2_crit: sensor2-crit { @@ -2547,14 +2562,30 @@ polling-delay-passive = <250>; polling-delay = <1000>; thermal-sensors = <&tsc 2>; + sustainable-power = <2439>; trips { + target: trip-point1 { + /* miliCelsius */ + temperature = <100000>; + hysteresis = <1000>; + type = "passive"; + }; + sensor3_crit: sensor3-crit { temperature = <120000>; hysteresis = <1000>; type = "critical"; }; }; + + cooling-maps { + map0 { + trip = <&target>; + cooling-device = <&a57_0 2 4>; + contribution = <1024>; + }; + }; }; }; diff --git a/dts/src/arm64/renesas/r8a77970-eagle.dts b/dts/src/arm64/renesas/r8a77970-eagle.dts index b6d5332157..233f26fbec 100644 --- a/dts/src/arm64/renesas/r8a77970-eagle.dts +++ b/dts/src/arm64/renesas/r8a77970-eagle.dts @@ -19,7 +19,7 @@ }; chosen { - bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; + bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; stdout-path = "serial0:115200n8"; }; diff --git a/dts/src/arm64/renesas/r8a77990-ebisu.dts b/dts/src/arm64/renesas/r8a77990-ebisu.dts index c727725899..83fc13ac3f 100644 --- a/dts/src/arm64/renesas/r8a77990-ebisu.dts +++ b/dts/src/arm64/renesas/r8a77990-ebisu.dts @@ -19,7 +19,7 @@ }; chosen { - bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; + bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; stdout-path = "serial0:115200n8"; }; @@ -262,7 +262,6 @@ &avb { pinctrl-0 = <&avb_pins>; pinctrl-names = "default"; - renesas,no-ether-link; phy-handle = <&phy0>; status = "okay"; diff --git a/dts/src/arm64/renesas/r8a77990.dtsi b/dts/src/arm64/renesas/r8a77990.dtsi index 56cb566ffa..b4318661f3 100644 --- a/dts/src/arm64/renesas/r8a77990.dtsi +++ b/dts/src/arm64/renesas/r8a77990.dtsi @@ -84,9 +84,11 @@ compatible = "arm,cortex-a53"; reg = <0>; device_type = "cpu"; + #cooling-cells = <2>; power-domains = <&sysc R8A77990_PD_CA53_CPU0>; next-level-cache = <&L2_CA53>; enable-method = "psci"; + dynamic-power-coefficient = <277>; clocks =<&cpg CPG_CORE R8A77990_CLK_Z2>; operating-points-v2 = <&cluster1_opp>; }; @@ -630,7 +632,7 @@ <&usb_dmac1 0>, <&usb_dmac1 1>; dma-names = "ch0", "ch1", "ch2", "ch3"; renesas,buswait = <11>; - phys = <&usb2_phy0>; + phys = <&usb2_phy0 3>; phy-names = "usb"; power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; resets = <&cpg 704>, <&cpg 703>; @@ -1537,7 +1539,7 @@ reg = <0 0xee080000 0 0x100>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; - phys = <&usb2_phy0>; + phys = <&usb2_phy0 1>; phy-names = "usb"; power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; resets = <&cpg 703>, <&cpg 704>; @@ -1549,7 +1551,7 @@ reg = <0 0xee080100 0 0x100>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; - phys = <&usb2_phy0>; + phys = <&usb2_phy0 2>; phy-names = "usb"; companion = <&ohci0>; power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; @@ -1565,7 +1567,7 @@ clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; resets = <&cpg 703>, <&cpg 704>; - #phy-cells = <0>; + #phy-cells = <1>; status = "disabled"; }; @@ -1758,7 +1760,7 @@ du: display@feb00000 { compatible = "renesas,du-r8a77990"; - reg = <0 0xfeb00000 0 0x80000>; + reg = <0 0xfeb00000 0 0x40000>; interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 724>, @@ -1801,6 +1803,8 @@ resets = <&cpg 727>; status = "disabled"; + renesas,companion = <&lvds1>; + ports { #address-cells = <1>; #size-cells = <0>; @@ -1856,11 +1860,18 @@ thermal-zones { cpu-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; - thermal-sensors = <&thermal>; + polling-delay = <0>; + thermal-sensors = <&thermal 0>; + sustainable-power = <717>; trips { - cpu-crit { + target: trip-point1 { + temperature = <100000>; + hysteresis = <2000>; + type = "passive"; + }; + + sensor1_crit: sensor1-crit { temperature = <120000>; hysteresis = <2000>; type = "critical"; @@ -1868,6 +1879,11 @@ }; cooling-maps { + map0 { + trip = <&target>; + cooling-device = <&a53_0 0 2>; + contribution = <1024>; + }; }; }; }; diff --git a/dts/src/arm64/renesas/r8a77995-draak.dts b/dts/src/arm64/renesas/r8a77995-draak.dts index a7dc11e36f..0711170b26 100644 --- a/dts/src/arm64/renesas/r8a77995-draak.dts +++ b/dts/src/arm64/renesas/r8a77995-draak.dts @@ -20,7 +20,7 @@ }; chosen { - bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; + bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; stdout-path = "serial0:115200n8"; }; @@ -511,12 +511,7 @@ status = "okay"; ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - + port { vin4_in: endpoint { remote-endpoint = <&adv7180_out>; }; diff --git a/dts/src/arm64/renesas/r8a77995.dtsi b/dts/src/arm64/renesas/r8a77995.dtsi index 5bf3af246e..0a344eb550 100644 --- a/dts/src/arm64/renesas/r8a77995.dtsi +++ b/dts/src/arm64/renesas/r8a77995.dtsi @@ -354,7 +354,7 @@ <&usb_dmac1 0>, <&usb_dmac1 1>; dma-names = "ch0", "ch1", "ch2", "ch3"; renesas,buswait = <11>; - phys = <&usb2_phy0>; + phys = <&usb2_phy0 3>; phy-names = "usb"; power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; resets = <&cpg 704>, <&cpg 703>; @@ -875,7 +875,7 @@ reg = <0 0xee080000 0 0x100>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; - phys = <&usb2_phy0>; + phys = <&usb2_phy0 1>; phy-names = "usb"; power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; resets = <&cpg 703>, <&cpg 704>; @@ -887,7 +887,7 @@ reg = <0 0xee080100 0 0x100>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; - phys = <&usb2_phy0>; + phys = <&usb2_phy0 2>; phy-names = "usb"; companion = <&ohci0>; power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; @@ -903,7 +903,7 @@ clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; resets = <&cpg 703>, <&cpg 704>; - #phy-cells = <0>; + #phy-cells = <1>; status = "disabled"; }; @@ -1038,6 +1038,8 @@ resets = <&cpg 727>; status = "disabled"; + renesas,companion = <&lvds1>; + ports { #address-cells = <1>; #size-cells = <0>; diff --git a/dts/src/arm64/renesas/salvator-common.dtsi b/dts/src/arm64/renesas/salvator-common.dtsi index 2dba1328ac..5c2c84723e 100644 --- a/dts/src/arm64/renesas/salvator-common.dtsi +++ b/dts/src/arm64/renesas/salvator-common.dtsi @@ -39,7 +39,7 @@ }; chosen { - bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; + bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; stdout-path = "serial0:115200n8"; }; diff --git a/dts/src/arm64/renesas/ulcb-kf.dtsi b/dts/src/arm64/renesas/ulcb-kf.dtsi index 7a09576b31..27851a77f5 100644 --- a/dts/src/arm64/renesas/ulcb-kf.dtsi +++ b/dts/src/arm64/renesas/ulcb-kf.dtsi @@ -38,6 +38,18 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; }; + + wlan_en: regulator-wlan_en { + compatible = "regulator-fixed"; + regulator-name = "wlan-en-regulator"; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&gpio_exp_74 4 GPIO_ACTIVE_HIGH>; + startup-delay-us = <70000>; + enable-active-high; + }; }; &can0 { @@ -88,6 +100,13 @@ line-name = "Audio_Out_OFF"; }; + sd-wifi-mux { + gpio-hog; + gpios = <5 GPIO_ACTIVE_HIGH>; + output-low; /* Connect WL1837 */ + line-name = "SD WiFi mux"; + }; + hub_pwen { gpio-hog; gpios = <6 GPIO_ACTIVE_HIGH>; @@ -254,6 +273,12 @@ function = "scif1"; }; + sdhi3_pins: sdhi3 { + groups = "sdhi3_data4", "sdhi3_ctrl"; + function = "sdhi3"; + power-source = <3300>; + }; + usb0_pins: usb0 { groups = "usb0"; function = "usb0"; @@ -273,6 +298,30 @@ status = "okay"; }; +&sdhi3 { + pinctrl-0 = <&sdhi3_pins>; + pinctrl-names = "default"; + + vmmc-supply = <&wlan_en>; + vqmmc-supply = <&wlan_en>; + bus-width = <4>; + no-1-8-v; + non-removable; + cap-power-off-card; + keep-power-in-suspend; + max-frequency = <26000000>; + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@2 { + compatible = "ti,wl1837"; + reg = <2>; + interrupt-parent = <&gpio1>; + interrupts = <25 IRQ_TYPE_EDGE_FALLING>; + }; +}; + &usb2_phy0 { pinctrl-0 = <&usb0_pins>; pinctrl-names = "default"; diff --git a/dts/src/arm64/renesas/ulcb.dtsi b/dts/src/arm64/renesas/ulcb.dtsi index e70e1bac2b..7e498b46e9 100644 --- a/dts/src/arm64/renesas/ulcb.dtsi +++ b/dts/src/arm64/renesas/ulcb.dtsi @@ -26,7 +26,7 @@ }; chosen { - bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; + bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; stdout-path = "serial0:115200n8"; }; diff --git a/dts/src/arm64/rockchip/rk3328-roc-cc.dts b/dts/src/arm64/rockchip/rk3328-roc-cc.dts index 5d499c9086..bb40c163b0 100644 --- a/dts/src/arm64/rockchip/rk3328-roc-cc.dts +++ b/dts/src/arm64/rockchip/rk3328-roc-cc.dts @@ -141,10 +141,12 @@ phy-mode = "rgmii"; pinctrl-names = "default"; pinctrl-0 = <&rgmiim1_pins>; - snps,force_thresh_dma_mode; + snps,aal; snps,reset-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>; snps,reset-active-low; snps,reset-delays-us = <0 10000 50000>; + snps,rxpbl = <0x4>; + snps,txpbl = <0x4>; tx_delay = <0x24>; rx_delay = <0x18>; status = "okay"; diff --git a/dts/src/arm64/rockchip/rk3328.dtsi b/dts/src/arm64/rockchip/rk3328.dtsi index 994468671b..e9fefd8a7e 100644 --- a/dts/src/arm64/rockchip/rk3328.dtsi +++ b/dts/src/arm64/rockchip/rk3328.dtsi @@ -407,6 +407,7 @@ compatible = "snps,dw-wdt"; reg = <0x0 0xff1a0000 0x0 0x100>; interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_WDT>; }; pwm0: pwm@ff1b0000 { diff --git a/dts/src/arm64/rockchip/rk3399-ficus.dts b/dts/src/arm64/rockchip/rk3399-ficus.dts index 6b059bd7a0..ebe2ee77ba 100644 --- a/dts/src/arm64/rockchip/rk3399-ficus.dts +++ b/dts/src/arm64/rockchip/rk3399-ficus.dts @@ -146,6 +146,12 @@ }; }; +&spi1 { + /* On both Low speed and High speed expansion */ + cs-gpios = <0>, <&gpio4 RK_PA6 0>, <&gpio4 RK_PA7 0>; + status = "okay"; +}; + &usbdrd_dwc3_0 { dr_mode = "host"; }; diff --git a/dts/src/arm64/rockchip/rk3399-hugsun-x99.dts b/dts/src/arm64/rockchip/rk3399-hugsun-x99.dts new file mode 100644 index 0000000000..0d1f5f9a0d --- /dev/null +++ b/dts/src/arm64/rockchip/rk3399-hugsun-x99.dts @@ -0,0 +1,733 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/dts-v1/; +#include <dt-bindings/pwm/pwm.h> +#include <dt-bindings/input/input.h> +#include "rk3399.dtsi" +#include "rk3399-opp.dtsi" + +/ { + model = "Hugsun X99 TV BOX"; + compatible = "hugsun,x99", "rockchip,rk3399"; + + chosen { + stdout-path = "serial2:1500000n8"; + }; + + clkin_gmac: external-gmac-clock { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "clkin_gmac"; + #clock-cells = <0>; + }; + + dc_5v: dc-5v { + compatible = "regulator-fixed"; + regulator-name = "dc_5v"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + vcc_sys: vcc-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc_sys"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + vin-supply = <&dc_5v>; + }; + + vcc_phy: vcc-phy-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_phy"; + regulator-always-on; + regulator-boot-on; + }; + + vcc1v8_s0: vcc1v8-s0 { + compatible = "regulator-fixed"; + regulator-name = "vcc1v8_s0"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vcc3v3_sys: vcc3v3-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_sys"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + vin-supply = <&vcc_sys>; + }; + + vcc5v0_host: vcc5v0-host-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&host_vbus_drv>; + regulator-name = "vcc5v0_host"; + regulator-always-on; + }; + + vcc5v0_typec: vcc5v0-typec-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_typec_en>; + regulator-name = "vcc5v0_typec"; + regulator-always-on; + vin-supply = <&vcc5v0_usb>; + }; + + vcc5v0_usb: vcc5v0-usb { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_usb"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&dc_5v>; + }; + + vdd_log: vdd-log { + compatible = "pwm-regulator"; + pwms = <&pwm2 0 25000 1>; + pwm-supply = <&vcc_sys>; + regulator-name = "vdd_log"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + regulator-boot-on; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&rk808 1>; + clock-names = "ext_clock"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_reg_on_h>; + reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; + }; + +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_b0 { + cpu-supply = <&vdd_cpu_b>; +}; + +&cpu_b1 { + cpu-supply = <&vdd_cpu_b>; +}; + +&emmc_phy { + status = "okay"; +}; + +&gmac { + assigned-clocks = <&cru SCLK_RMII_SRC>; + assigned-clock-parents = <&clkin_gmac>; + clock_in_out = "input"; + phy-supply = <&vcc_phy>; + phy-mode = "rgmii"; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>; + snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 50000>; + tx_delay = <0x28>; + rx_delay = <0x11>; + status = "okay"; +}; + +&gpu { + status = "okay"; + mali-supply = <&vdd_gpu>; +}; + +&hdmi { + ddc-i2c-bus = <&i2c3>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_cec>; + status = "okay"; +}; + +&hdmi_sound { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + i2c-scl-rising-time-ns = <180>; + i2c-scl-falling-time-ns = <30>; + clock-frequency = <400000>; + + vdd_cpu_b: syr827@40 { + compatible = "silergy,syr827"; + reg = <0x40>; + regulator-compatible = "fan53555-reg"; + pinctrl-0 = <&vsel1_gpio>; + regulator-name = "vdd_cpu_b"; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1500000>; + regulator-ramp-delay = <1000>; + fcs,suspend-voltage-selector = <1>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_sys>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu: syr828@41 { + compatible = "silergy,syr828"; + reg = <0x41>; + regulator-compatible = "fan53555-reg"; + pinctrl-0 = <&vsel2_gpio>; + regulator-name = "vdd_gpu"; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1500000>; + regulator-ramp-delay = <1000>; + fcs,suspend-voltage-selector = <1>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_sys>; + regulator-initial-mode = <1>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + rk808: pmic@1b { + compatible = "rockchip,rk808"; + reg = <0x1b>; + interrupt-parent = <&gpio1>; + interrupts = <21 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l>; + rockchip,system-power-controller; + wakeup-source; + #clock-cells = <1>; + clock-output-names = "xin32k", "rtc_clko_wifi"; + + vcc1-supply = <&vcc_sys>; + vcc2-supply = <&vcc_sys>; + vcc3-supply = <&vcc_sys>; + vcc4-supply = <&vcc_sys>; + vcc6-supply = <&vcc_sys>; + vcc7-supply = <&vcc_sys>; + vcc8-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc_sys>; + vcc10-supply = <&vcc_sys>; + vcc11-supply = <&vcc_sys>; + vcc12-supply = <&vcc3v3_sys>; + vddio-supply = <&vcc_1v8>; + + regulators { + vdd_center: DCDC_REG1 { + regulator-name = "vdd_center"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-ramp-delay = <6001>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_l: DCDC_REG2 { + regulator-name = "vdd_cpu_l"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_1v8: DCDC_REG4 { + regulator-name = "vcc_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc1v8_dvp: LDO_REG1 { + regulator-name = "vcc1v8_dvp"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcca1v8_hdmi: LDO_REG2 { + regulator-name = "vcca1v8_hdmi"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcca_1v8: LDO_REG3 { + regulator-name = "vcca_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc_sd: LDO_REG4 { + regulator-name = "vcc_sd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc3v0_sd: LDO_REG5 { + regulator-name = "vcc3v0_sd"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vcc_1v5: LDO_REG6 { + regulator-name = "vcc_1v5"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1500000>; + }; + }; + + vcca0v9_hdmi: LDO_REG7 { + regulator-name = "vcca0v9_hdmi"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vcc_3v0: LDO_REG8 { + regulator-name = "vcc_3v0"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vcc3v3_s3: SWITCH_REG1 { + regulator-name = "vcc3v3_s3"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc3v3_s0: SWITCH_REG2 { + regulator-name = "vcc3v3_s0"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + }; + }; +}; + +&i2c1 { + i2c-scl-rising-time-ns = <300>; + i2c-scl-falling-time-ns = <15>; + status = "okay"; +}; + +&i2c3 { + i2c-scl-rising-time-ns = <450>; + i2c-scl-falling-time-ns = <15>; + status = "okay"; +}; + +&i2c4 { + i2c-scl-rising-time-ns = <600>; + i2c-scl-falling-time-ns = <40>; + status = "okay"; + + fusb0: typec-portc@22 { + compatible = "fcs,fusb302"; + reg = <0x22>; + interrupt-parent = <&gpio1>; + interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&fusb0_int>; + vbus-supply = <&vcc5v0_typec>; + status = "okay"; + }; +}; + +&i2c7 { + status = "okay"; +}; + +&i2s0 { + rockchip,playback-channels = <8>; + rockchip,capture-channels = <8>; + status = "okay"; +}; + +&i2s1 { + rockchip,playback-channels = <2>; + rockchip,capture-channels = <2>; + status = "okay"; +}; + +&i2s2 { + status = "okay"; +}; + +&io_domains { + status = "okay"; + audio-supply = <&vcc1v8_s0>; + bt656-supply = <&vcc1v8_s0>; + gpio1830-supply = <&vcc_3v0>; + sdmmc-supply = <&vcc_sd>; +}; + +&pmu_io_domains { + status = "okay"; + pmu1830-supply = <&vcc_1v8>; +}; + +&pinctrl { + fusb30x { + fusb0_int: fusb0-int { + rockchip,pins = + <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + gmac { + rgmii_sleep_pins: rgmii-sleep-pins { + rockchip,pins = + <3 RK_PB7 RK_FUNC_GPIO &pcfg_output_low>; + }; + }; + + pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = + <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + vsel1_gpio: vsel1-gpio { + rockchip,pins = + <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + vsel2_gpio: vsel2-gpio { + rockchip,pins = + <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + + sdio { + bt_host_wake_l: bt-host-wake-l { + rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_reg_on_h: bt-reg-on-h { + /* external pullup to VCC1V8_PMUPLL */ + rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_wake_l: bt-wake-l { + rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + wifi_reg_on_h: wifi-reg_on-h { + rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + wifi { + wifi_host_wake_l: wifi-host-wake-l { + rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb-typec { + vcc5v0_typec_en: vcc5v0_typec_en { + rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + usb2 { + host_vbus_drv: host-vbus-drv { + rockchip,pins = + <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pwm0 { + status = "okay"; +}; + +&pwm2 { + status = "okay"; + pinctrl-0 = <&pwm2_pin_pull_down>; +}; + +&saradc { + vref-supply = <&vcc1v8_s0>; + status = "okay"; +}; + +&sdmmc { + clock-frequency = <150000000>; + clock-freq-min-max = <200000 150000000>; + supports-sd; + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + disable-wp; + vqmmc-supply = <&vcc_sd>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; + card-detect-delay = <800>; + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + supports-emmc; + non-removable; + keep-power-in-suspend; + status = "okay"; +}; + +&sdio0 { + bus-width = <4>; + clock-frequency = <50000000>; + cap-sdio-irq; + cap-sd-highspeed; + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>; + sd-uhs-sdr104; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + brcmf: wifi@1 { + compatible = "brcm,bcm4329-fmac"; + reg = <1>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>; + interrupt-names = "host-wake"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_host_wake_l>; + }; +}; + +&spdif { + status = "okay"; + pinctrl-0 = <&spdif_bus_1>; + #sound-dai-cells = <0>; +}; + +&spi1 { + status = "okay"; + max-freq = <10000000>; + + flash@0 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + spi-max-frequency = <10000000>; + }; +}; + +&tcphy0 { + status = "okay"; +}; + +&tcphy1 { + status = "okay"; +}; + +&tsadc { + /* tshut mode 0:CRU 1:GPIO */ + rockchip,hw-tshut-mode = <1>; + /* tshut polarity 0:LOW 1:HIGH */ + rockchip,hw-tshut-polarity = <1>; + rockchip,hw-tshut-temp = <110000>; + status = "okay"; +}; + +&u2phy0 { + status = "okay"; + + u2phy0_host: host-port { + phy-supply = <&vcc5v0_host>; + status = "okay"; + }; + + u2phy0_otg: otg-port { + status = "okay"; + }; +}; + +&u2phy1 { + status = "okay"; + + u2phy1_host: host-port { + phy-supply = <&vcc5v0_host>; + status = "okay"; + }; + + u2phy1_otg: otg-port { + status = "okay"; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer &uart0_rts &uart0_cts>; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + clocks = <&rk808 1>; + clock-names = "ext_clock"; + device-wakeup-gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>; + max-speed = <4000000>; + pinctrl-names = "default"; + pinctrl-0 = <&bt_reg_on_h &bt_host_wake_l &bt_wake_l>; + vbat-supply = <&vcc3v3_sys>; + vddio-supply = <&vcc_1v8>; + }; +}; + +&uart2 { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +&usbdrd3_0 { + status = "okay"; +}; + +&usbdrd_dwc3_0 { + status = "okay"; + dr_mode = "otg"; +}; + +&usbdrd3_1 { + status = "okay"; +}; + +&usbdrd_dwc3_1 { + status = "okay"; + dr_mode = "host"; +}; + +&vopb { + status = "okay"; +}; + +&vopb_mmu { + status = "okay"; +}; diff --git a/dts/src/arm64/rockchip/rk3399-khadas-edge-captain.dts b/dts/src/arm64/rockchip/rk3399-khadas-edge-captain.dts new file mode 100644 index 0000000000..8302e51def --- /dev/null +++ b/dts/src/arm64/rockchip/rk3399-khadas-edge-captain.dts @@ -0,0 +1,27 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 Shenzhen Wesion Technology Co., Ltd. + * (https://www.khadas.com) + */ + +/dts-v1/; +#include "rk3399-khadas-edge.dtsi" + +/ { + model = "Khadas Edge-Captain"; + compatible = "khadas,edge-captain", "rockchip,rk3399"; +}; + +&gmac { + status = "okay"; +}; + +&pcie_phy { + status = "okay"; +}; + +&pcie0 { + ep-gpios = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>; + num-lanes = <4>; + status = "okay"; +}; diff --git a/dts/src/arm64/rockchip/rk3399-khadas-edge-v.dts b/dts/src/arm64/rockchip/rk3399-khadas-edge-v.dts new file mode 100644 index 0000000000..f5dcb99dc3 --- /dev/null +++ b/dts/src/arm64/rockchip/rk3399-khadas-edge-v.dts @@ -0,0 +1,27 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 Shenzhen Wesion Technology Co., Ltd. + * (https://www.khadas.com) + */ + +/dts-v1/; +#include "rk3399-khadas-edge.dtsi" + +/ { + model = "Khadas Edge-V"; + compatible = "khadas,edge-v", "rockchip,rk3399"; +}; + +&gmac { + status = "okay"; +}; + +&pcie_phy { + status = "okay"; +}; + +&pcie0 { + ep-gpios = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>; + num-lanes = <4>; + status = "okay"; +}; diff --git a/dts/src/arm64/rockchip/rk3399-khadas-edge.dts b/dts/src/arm64/rockchip/rk3399-khadas-edge.dts new file mode 100644 index 0000000000..31616e7ad8 --- /dev/null +++ b/dts/src/arm64/rockchip/rk3399-khadas-edge.dts @@ -0,0 +1,13 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 Shenzhen Wesion Technology Co., Ltd. + * (https://www.khadas.com) + */ + +/dts-v1/; +#include "rk3399-khadas-edge.dtsi" + +/ { + model = "Khadas Edge"; + compatible = "khadas,edge", "rockchip,rk3399"; +}; diff --git a/dts/src/arm64/rockchip/rk3399-khadas-edge.dtsi b/dts/src/arm64/rockchip/rk3399-khadas-edge.dtsi new file mode 100644 index 0000000000..4944d78a0a --- /dev/null +++ b/dts/src/arm64/rockchip/rk3399-khadas-edge.dtsi @@ -0,0 +1,804 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 Shenzhen Wesion Technology Co., Ltd. + * (https://www.khadas.com) + */ + +/dts-v1/; +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/pwm/pwm.h> +#include "rk3399.dtsi" +#include "rk3399-opp.dtsi" + +/ { + chosen { + stdout-path = "serial2:1500000n8"; + }; + + clkin_gmac: external-gmac-clock { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "clkin_gmac"; + #clock-cells = <0>; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&rk808 1>; + clock-names = "ext_clock"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_enable_h>; + + /* + * On the module itself this is one of these (depending + * on the actual card populated): + * - SDIO_RESET_L_WL_REG_ON + * - PDN (power down when low) + */ + reset-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_LOW>; + }; + + /* switched by pmic_sleep */ + vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 { + compatible = "regulator-fixed"; + regulator-name = "vcc1v8_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_1v8>; + }; + + vcc3v3_pcie: vcc3v3-pcie-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_pcie"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vsys_3v3>; + }; + + /* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */ + vcc5v0_host: vcc5v0-host-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_host_en>; + regulator-name = "vcc5v0_host"; + regulator-always-on; + vin-supply = <&vsys_5v0>; + }; + + vdd_log: vdd-log { + compatible = "pwm-regulator"; + pwms = <&pwm2 0 25000 1>; + regulator-name = "vdd_log"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + vin-supply = <&vsys_3v3>; + }; + + vsys: vsys { + compatible = "regulator-fixed"; + regulator-name = "vsys"; + regulator-always-on; + regulator-boot-on; + }; + + vsys_3v3: vsys-3v3 { + compatible = "regulator-fixed"; + regulator-name = "vsys_3v3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vsys>; + }; + + vsys_5v0: vsys-5v0 { + compatible = "regulator-fixed"; + regulator-name = "vsys_5v0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vsys>; + }; + + adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 1>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1800000>; + poll-interval = <100>; + + recovery { + label = "Recovery"; + linux,code = <KEY_VENDOR>; + press-threshold-microvolt = <18000>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + autorepeat; + pinctrl-names = "default"; + pinctrl-0 = <&pwrbtn>; + + power { + debounce-interval = <100>; + gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; + label = "GPIO Key Power"; + linux,code = <KEY_POWER>; + wakeup-source; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&sys_led_gpio>, <&user_led_gpio>; + + sys-led { + label = "sys_led"; + linux,default-trigger = "heartbeat"; + gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; + }; + + user-led { + label = "user_led"; + default-state = "off"; + gpios = <&gpio4 RK_PD0 GPIO_ACTIVE_HIGH>; + }; + }; + + fan: pwm-fan { + compatible = "pwm-fan"; + cooling-levels = <0 150 200 255>; + #cooling-cells = <2>; + fan-supply = <&vsys_5v0>; + pwms = <&pwm0 0 40000 0>; + }; +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_b0 { + cpu-supply = <&vdd_cpu_b>; +}; + +&cpu_b1 { + cpu-supply = <&vdd_cpu_b>; +}; + +&cpu_thermal { + trips { + cpu_warm: cpu_warm { + temperature = <55000>; + hysteresis = <2000>; + type = "active"; + }; + + cpu_hot: cpu_hot { + temperature = <65000>; + hysteresis = <2000>; + type = "active"; + }; + }; + + cooling-maps { + map2 { + trip = <&cpu_warm>; + cooling-device = <&fan THERMAL_NO_LIMIT 1>; + }; + + map3 { + trip = <&cpu_hot>; + cooling-device = <&fan 2 THERMAL_NO_LIMIT>; + }; + }; +}; + +&emmc_phy { + status = "okay"; +}; + +&gmac { + assigned-clocks = <&cru SCLK_RMII_SRC>; + assigned-clock-parents = <&clkin_gmac>; + clock_in_out = "input"; + phy-supply = <&vcc_lan>; + phy-mode = "rgmii"; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>; + snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 50000>; + tx_delay = <0x28>; + rx_delay = <0x11>; +}; + +&gpu { + mali-supply = <&vdd_gpu>; + status = "okay"; +}; + +&gpu_thermal { + trips { + gpu_warm: gpu_warm { + temperature = <55000>; + hysteresis = <2000>; + type = "active"; + }; + + gpu_hot: gpu_hot { + temperature = <65000>; + hysteresis = <2000>; + type = "active"; + }; + }; + + cooling-maps { + map1 { + trip = <&gpu_warm>; + cooling-device = <&fan THERMAL_NO_LIMIT 1>; + }; + + map2 { + trip = <&gpu_hot>; + cooling-device = <&fan 2 THERMAL_NO_LIMIT>; + }; + }; +}; + +&hdmi { + ddc-i2c-bus = <&i2c3>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_cec>; + status = "okay"; +}; + +&hdmi_sound { + status = "okay"; +}; + +&i2c3 { + i2c-scl-rising-time-ns = <450>; + i2c-scl-falling-time-ns = <15>; + status = "okay"; +}; + +&i2c4 { + clock-frequency = <400000>; + i2c-scl-rising-time-ns = <168>; + i2c-scl-falling-time-ns = <4>; + status = "okay"; + + rk808: pmic@1b { + compatible = "rockchip,rk808"; + reg = <0x1b>; + interrupt-parent = <&gpio1>; + interrupts = <RK_PC6 IRQ_TYPE_LEVEL_LOW>; + #clock-cells = <1>; + clock-output-names = "xin32k", "rk808-clkout2"; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l>; + rockchip,system-power-controller; + wakeup-source; + + vcc1-supply = <&vsys_3v3>; + vcc2-supply = <&vsys_3v3>; + vcc3-supply = <&vsys_3v3>; + vcc4-supply = <&vsys_3v3>; + vcc6-supply = <&vsys_3v3>; + vcc7-supply = <&vsys_3v3>; + vcc8-supply = <&vsys_3v3>; + vcc9-supply = <&vsys_3v3>; + vcc10-supply = <&vsys_3v3>; + vcc11-supply = <&vsys_3v3>; + vcc12-supply = <&vsys_3v3>; + vddio-supply = <&vcc_1v8>; + + regulators { + vdd_center: DCDC_REG1 { + regulator-name = "vdd_center"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_l: DCDC_REG2 { + regulator-name = "vdd_cpu_l"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_1v8: DCDC_REG4 { + regulator-name = "vcc_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc1v8_apio2: LDO_REG1 { + regulator-name = "vcc1v8_apio2"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_vldo2: LDO_REG2 { + regulator-name = "vcc_vldo2"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc1v8_pmupll: LDO_REG3 { + regulator-name = "vcc1v8_pmupll"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vccio_sd: LDO_REG4 { + regulator-name = "vccio_sd"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vcc_vldo5: LDO_REG5 { + regulator-name = "vcc_vldo5"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v5: LDO_REG6 { + regulator-name = "vcc_1v5"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1500000>; + }; + }; + + vcc1v8_codec: LDO_REG7 { + regulator-name = "vcc1v8_codec"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v0: LDO_REG8 { + regulator-name = "vcc_3v0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vcc3v3_s3: vcc_lan: SWITCH_REG1 { + regulator-name = "vcc3v3_s3"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_s0: SWITCH_REG2 { + regulator-name = "vcc3v3_s0"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; + + vdd_cpu_b: regulator@40 { + compatible = "silergy,syr827"; + reg = <0x40>; + fcs,suspend-voltage-selector = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&cpu_b_sleep>; + regulator-name = "vdd_cpu_b"; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1500000>; + regulator-ramp-delay = <1000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vsys_3v3>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu: regulator@41 { + compatible = "silergy,syr828"; + reg = <0x41>; + fcs,suspend-voltage-selector = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&gpu_sleep>; + regulator-name = "vdd_gpu"; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1500000>; + regulator-ramp-delay = <1000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vsys_3v3>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&i2c8 { + clock-frequency = <400000>; + i2c-scl-rising-time-ns = <160>; + i2c-scl-falling-time-ns = <30>; + status = "okay"; +}; + +&i2s0 { + rockchip,playback-channels = <8>; + rockchip,capture-channels = <8>; + status = "okay"; +}; + +&i2s1 { + rockchip,playback-channels = <2>; + rockchip,capture-channels = <2>; + status = "okay"; +}; + +&i2s2 { + status = "okay"; +}; + +&io_domains { + bt656-supply = <&vcc1v8_apio2>; + audio-supply = <&vcc1v8_codec>; + sdmmc-supply = <&vccio_sd>; + gpio1830-supply = <&vcc_3v0>; + status = "okay"; +}; + +&pmu_io_domains { + pmu1830-supply = <&vcc_1v8>; + status = "okay"; +}; + +&pinctrl { + bt { + bt_host_wake_l: bt-host-wake-l { + rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_reg_on_h: bt-reg-on-h { + rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_wake_l: bt-wake-l { + rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + buttons { + pwrbtn: pwrbtn { + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + leds { + sys_led_gpio: sys_led-gpio { + rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + user_led_gpio: user_led-gpio { + rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + cpu_b_sleep: cpu-b-sleep { + rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + gpu_sleep: gpu-sleep { + rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + + sdio-pwrseq { + wifi_enable_h: wifi-enable-h { + rockchip,pins = <2 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb2 { + vcc5v0_host_en: vcc5v0-host-en { + rockchip,pins = <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + wifi { + wifi_host_wake_l: wifi-host-wake-l { + rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pwm0 { + status = "okay"; +}; + +&pwm2 { + status = "okay"; +}; + +&saradc { + vref-supply = <&vcca1v8_s3>; + status = "okay"; +}; + +&sdio0 { + /* WiFi & BT combo module Ampak AP6356S */ + bus-width = <4>; + cap-sdio-irq; + cap-sd-highspeed; + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>; + sd-uhs-sdr104; + vqmmc-supply = <&vcc1v8_s3>; + vmmc-supply = <&vccio_sd>; + status = "okay"; + + brcmf: wifi@1 { + compatible = "brcm,bcm4329-fmac"; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>; + interrupt-names = "host-wake"; + brcm,drive-strength = <5>; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_host_wake_l>; + }; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>; + disable-wp; + max-frequency = <150000000>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>; + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + non-removable; + status = "okay"; +}; + +&tcphy0 { + status = "okay"; +}; + +&tcphy1 { + status = "okay"; +}; + +&tsadc { + /* tshut mode 0:CRU 1:GPIO */ + rockchip,hw-tshut-mode = <1>; + /* tshut polarity 0:LOW 1:HIGH */ + rockchip,hw-tshut-polarity = <1>; + status = "okay"; +}; + +&u2phy0 { + status = "okay"; + + u2phy0_otg: otg-port { + status = "okay"; + }; + + u2phy0_host: host-port { + phy-supply = <&vcc5v0_host>; + status = "okay"; + }; +}; + +&u2phy1 { + status = "okay"; + + u2phy1_otg: otg-port { + status = "okay"; + }; + + u2phy1_host: host-port { + phy-supply = <&vcc5v0_host>; + status = "okay"; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer &uart0_rts &uart0_cts>; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + clocks = <&rk808 1>; + clock-names = "lpo"; + device-wakeup-gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>; + max-speed = <4000000>; + pinctrl-names = "default"; + pinctrl-0 = <&bt_reg_on_h &bt_host_wake_l &bt_wake_l>; + vbat-supply = <&vsys_3v3>; + vddio-supply = <&vcc_1v8>; + }; +}; + +&uart2 { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +&usbdrd3_0 { + status = "okay"; +}; + +&usbdrd_dwc3_0 { + status = "okay"; + dr_mode = "otg"; +}; + +&usbdrd3_1 { + status = "okay"; +}; + +&usbdrd_dwc3_1 { + status = "okay"; + dr_mode = "host"; +}; + +&vopb { + status = "okay"; +}; + +&vopb_mmu { + status = "okay"; +}; + +&vopl { + status = "okay"; +}; + +&vopl_mmu { + status = "okay"; +}; diff --git a/dts/src/arm64/rockchip/rk3399-rock-pi-4.dts b/dts/src/arm64/rockchip/rk3399-rock-pi-4.dts index e030627159..1ae1ebd4ef 100644 --- a/dts/src/arm64/rockchip/rk3399-rock-pi-4.dts +++ b/dts/src/arm64/rockchip/rk3399-rock-pi-4.dts @@ -25,6 +25,15 @@ #clock-cells = <0>; }; + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&rk808 1>; + clock-names = "ext_clock"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_enable_h>; + reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; + }; + vcc12v_dcin: dc-12v { compatible = "regulator-fixed"; regulator-name = "vcc12v_dcin"; @@ -169,6 +178,10 @@ status = "okay"; }; +&hdmi_sound { + status = "okay"; +}; + &i2c0 { clock-frequency = <400000>; i2c-scl-rising-time-ns = <168>; @@ -451,12 +464,46 @@ }; &pinctrl { + bt { + bt_enable_h: bt-enable-h { + rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_host_wake_l: bt-host-wake-l { + rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_wake_l: bt-wake-l { + rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + pcie { pcie_pwr_en: pcie-pwr-en { rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; }; }; + sdio0 { + sdio0_bus4: sdio0-bus4 { + rockchip,pins = + <2 20 RK_FUNC_1 &pcfg_pull_up_20ma>, + <2 21 RK_FUNC_1 &pcfg_pull_up_20ma>, + <2 22 RK_FUNC_1 &pcfg_pull_up_20ma>, + <2 23 RK_FUNC_1 &pcfg_pull_up_20ma>; + }; + + sdio0_cmd: sdio0-cmd { + rockchip,pins = + <2 24 RK_FUNC_1 &pcfg_pull_up_20ma>; + }; + + sdio0_clk: sdio0-clk { + rockchip,pins = + <2 25 RK_FUNC_1 &pcfg_pull_none_20ma>; + }; + }; + pmic { pmic_int_l: pmic-int-l { rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; @@ -482,6 +529,17 @@ rockchip,pins = <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>; }; }; + + wifi { + wifi_enable_h: wifi-enable-h { + rockchip,pins = + <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + wifi_host_wake_l: wifi-host-wake-l { + rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; }; &pwm2 { @@ -494,6 +552,32 @@ vref-supply = <&vcc_1v8>; }; +&sdio0 { + #address-cells = <1>; + #size-cells = <0>; + bus-width = <4>; + clock-frequency = <50000000>; + cap-sdio-irq; + cap-sd-highspeed; + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>; + sd-uhs-sdr104; + status = "okay"; + + brcmf: wifi@1 { + compatible = "brcm,bcm4329-fmac"; + reg = <1>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>; + interrupt-names = "host-wake"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_host_wake_l>; + }; +}; + &sdmmc { bus-width = <4>; cap-mmc-highspeed; @@ -557,6 +641,23 @@ }; }; +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + clocks = <&rk808 1>; + clock-names = "ext_clock"; + device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>; + }; +}; + &uart2 { status = "okay"; }; diff --git a/dts/src/arm64/rockchip/rk3399-rock960.dts b/dts/src/arm64/rockchip/rk3399-rock960.dts index 12285c51cc..437a75f31a 100644 --- a/dts/src/arm64/rockchip/rk3399-rock960.dts +++ b/dts/src/arm64/rockchip/rk3399-rock960.dts @@ -114,6 +114,55 @@ }; }; +&spi0 { + /* On Low speed expansion (LS-SPI0) */ + status = "okay"; +}; + +&spi4 { + /* On High speed expansion (HS-SPI1) */ + status = "okay"; +}; + +&thermal_zones { + cpu_thermal: cpu { + polling-delay-passive = <100>; + polling-delay = <1000>; + thermal-sensors = <&tsadc 0>; + sustainable-power = <1550>; + + trips { + cpu_alert0: cpu_alert0 { + temperature = <65000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_alert1: cpu_alert1 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_crit: cpu_crit { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + + trip = <&cpu_alert1>; + cooling-device = + <&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu_b1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; +}; + &usbdrd_dwc3_0 { dr_mode = "otg"; }; diff --git a/dts/src/arm64/rockchip/rk3399-rockpro64.dts b/dts/src/arm64/rockchip/rk3399-rockpro64.dts index 20ec7d1c25..eb55940620 100644 --- a/dts/src/arm64/rockchip/rk3399-rockpro64.dts +++ b/dts/src/arm64/rockchip/rk3399-rockpro64.dts @@ -513,6 +513,20 @@ gpio1830-supply = <&vcc_3v0>; }; +&pcie0 { + ep-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>; + num-lanes = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie_perst>; + vpcie12v-supply = <&vcc12v_dcin>; + vpcie3v3-supply = <&vcc3v3_pcie>; + status = "okay"; +}; + +&pcie_phy { + status = "okay"; +}; + &pmu_io_domains { pmu1830-supply = <&vcc_3v0>; status = "okay"; @@ -542,6 +556,10 @@ }; pcie { + pcie_perst: pcie-perst { + rockchip,pins = <2 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + pcie_pwr_en: pcie-pwr-en { rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; }; diff --git a/dts/src/arm64/rockchip/rk3399-sapphire.dtsi b/dts/src/arm64/rockchip/rk3399-sapphire.dtsi index 04623e52ac..1bc1579674 100644 --- a/dts/src/arm64/rockchip/rk3399-sapphire.dtsi +++ b/dts/src/arm64/rockchip/rk3399-sapphire.dtsi @@ -565,12 +565,11 @@ status = "okay"; u2phy0_otg: otg-port { - phy-supply = <&vcc5v0_typec0>; status = "okay"; }; u2phy0_host: host-port { - phy-supply = <&vcc5v0_host>; + phy-supply = <&vcc5v0_typec0>; status = "okay"; }; }; @@ -620,7 +619,7 @@ &usbdrd_dwc3_0 { status = "okay"; - dr_mode = "otg"; + dr_mode = "host"; }; &usbdrd3_1 { diff --git a/dts/src/arm64/rockchip/rk3399.dtsi b/dts/src/arm64/rockchip/rk3399.dtsi index 196ac9b780..cede1ad81b 100644 --- a/dts/src/arm64/rockchip/rk3399.dtsi +++ b/dts/src/arm64/rockchip/rk3399.dtsi @@ -414,6 +414,9 @@ compatible = "snps,dwc3"; reg = <0x0 0xfe800000 0x0 0x100000>; interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru SCLK_USB3OTG0_REF>, <&cru ACLK_USB3OTG0>, + <&cru SCLK_USB3OTG0_SUSPEND>; + clock-names = "ref", "bus_early", "suspend"; dr_mode = "otg"; phys = <&u2phy0_otg>, <&tcphy0_usb3>; phy-names = "usb2-phy", "usb3-phy"; @@ -447,6 +450,9 @@ compatible = "snps,dwc3"; reg = <0x0 0xfe900000 0x0 0x100000>; interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru SCLK_USB3OTG1_REF>, <&cru ACLK_USB3OTG1>, + <&cru SCLK_USB3OTG1_SUSPEND>; + clock-names = "ref", "bus_early", "suspend"; dr_mode = "otg"; phys = <&u2phy1_otg>, <&tcphy1_usb3>; phy-names = "usb2-phy", "usb3-phy"; @@ -821,15 +827,6 @@ type = "critical"; }; }; - - cooling-maps { - map0 { - trip = <&gpu_alert0>; - cooling-device = - <&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu_b1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; }; }; @@ -1706,11 +1703,11 @@ reg = <0x0 0xff914000 0x0 0x100>, <0x0 0xff915000 0x0 0x100>; interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH 0>; interrupt-names = "isp0_mmu"; - clocks = <&cru ACLK_ISP0_NOC>, <&cru HCLK_ISP0_NOC>; + clocks = <&cru ACLK_ISP0_WRAPPER>, <&cru HCLK_ISP0_WRAPPER>; clock-names = "aclk", "iface"; #iommu-cells = <0>; + power-domains = <&power RK3399_PD_ISP0>; rockchip,disable-mmu-reset; - status = "disabled"; }; isp1_mmu: iommu@ff924000 { @@ -1718,11 +1715,11 @@ reg = <0x0 0xff924000 0x0 0x100>, <0x0 0xff925000 0x0 0x100>; interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH 0>; interrupt-names = "isp1_mmu"; - clocks = <&cru ACLK_ISP1_NOC>, <&cru HCLK_ISP1_NOC>; + clocks = <&cru ACLK_ISP1_WRAPPER>, <&cru HCLK_ISP1_WRAPPER>; clock-names = "aclk", "iface"; #iommu-cells = <0>; + power-domains = <&power RK3399_PD_ISP1>; rockchip,disable-mmu-reset; - status = "disabled"; }; hdmi_sound: hdmi-sound { diff --git a/dts/src/arm64/rockchip/rk3399pro.dtsi b/dts/src/arm64/rockchip/rk3399pro.dtsi new file mode 100644 index 0000000000..bb5ebf6608 --- /dev/null +++ b/dts/src/arm64/rockchip/rk3399pro.dtsi @@ -0,0 +1,22 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd. + +#include "rk3399.dtsi" + +/ { + compatible = "rockchip,rk3399pro"; +}; + +/* Default to enabled since AP talk to NPU part over pcie */ +&pcie_phy { + status = "okay"; +}; + +/* Default to enabled since AP talk to NPU part over pcie */ +&pcie0 { + ep-gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>; + num-lanes = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie_clkreqn_cpm>; + status = "okay"; +}; diff --git a/dts/src/arm64/socionext/uniphier-ld11-global.dts b/dts/src/arm64/socionext/uniphier-ld11-global.dts index 7968d52435..f72f048a0c 100644 --- a/dts/src/arm64/socionext/uniphier-ld11-global.dts +++ b/dts/src/arm64/socionext/uniphier-ld11-global.dts @@ -163,4 +163,8 @@ &nand { status = "okay"; + + nand@0 { + reg = <0>; + }; }; diff --git a/dts/src/arm64/socionext/uniphier-ld11.dtsi b/dts/src/arm64/socionext/uniphier-ld11.dtsi index a3cd475b48..8ec40a0b8b 100644 --- a/dts/src/arm64/socionext/uniphier-ld11.dtsi +++ b/dts/src/arm64/socionext/uniphier-ld11.dtsi @@ -8,8 +8,6 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/gpio/uniphier-gpio.h> -/memreserve/ 0x80000000 0x02000000; - / { compatible = "socionext,uniphier-ld11"; #address-cells = <2>; @@ -110,6 +108,17 @@ <1 10 4>; }; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + secure-memory@81000000 { + reg = <0x0 0x81000000 0x0 0x01000000>; + no-map; + }; + }; + soc@0 { compatible = "simple-bus"; #address-cells = <1>; @@ -617,6 +626,8 @@ status = "disabled"; reg-names = "nand_data", "denali_reg"; reg = <0x68000000 0x20>, <0x68100000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; interrupts = <0 65 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_nand>; diff --git a/dts/src/arm64/socionext/uniphier-ld20.dtsi b/dts/src/arm64/socionext/uniphier-ld20.dtsi index 017f6328c1..b658f2b641 100644 --- a/dts/src/arm64/socionext/uniphier-ld20.dtsi +++ b/dts/src/arm64/socionext/uniphier-ld20.dtsi @@ -9,8 +9,6 @@ #include <dt-bindings/gpio/uniphier-gpio.h> #include <dt-bindings/thermal/thermal.h> -/memreserve/ 0x80000000 0x02000000; - / { compatible = "socionext,uniphier-ld20"; #address-cells = <2>; @@ -215,6 +213,17 @@ }; }; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + secure-memory@81000000 { + reg = <0x0 0x81000000 0x0 0x01000000>; + no-map; + }; + }; + soc@0 { compatible = "simple-bus"; #address-cells = <1>; @@ -921,6 +930,8 @@ status = "disabled"; reg-names = "nand_data", "denali_reg"; reg = <0x68000000 0x20>, <0x68100000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; interrupts = <0 65 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_nand>; diff --git a/dts/src/arm64/socionext/uniphier-pxs3-ref.dts b/dts/src/arm64/socionext/uniphier-pxs3-ref.dts index 1965e4dfe4..754315bbd1 100644 --- a/dts/src/arm64/socionext/uniphier-pxs3-ref.dts +++ b/dts/src/arm64/socionext/uniphier-pxs3-ref.dts @@ -115,4 +115,8 @@ &nand { status = "okay"; + + nand@0 { + reg = <0>; + }; }; diff --git a/dts/src/arm64/socionext/uniphier-pxs3.dtsi b/dts/src/arm64/socionext/uniphier-pxs3.dtsi index bb97abe1a5..d6f6cee4d5 100644 --- a/dts/src/arm64/socionext/uniphier-pxs3.dtsi +++ b/dts/src/arm64/socionext/uniphier-pxs3.dtsi @@ -8,8 +8,6 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/gpio/uniphier-gpio.h> -/memreserve/ 0x80000000 0x02000000; - / { compatible = "socionext,uniphier-pxs3"; #address-cells = <2>; @@ -138,6 +136,17 @@ <1 10 4>; }; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + secure-memory@81000000 { + reg = <0x0 0x81000000 0x0 0x01000000>; + no-map; + }; + }; + soc@0 { compatible = "simple-bus"; #address-cells = <1>; @@ -779,6 +788,8 @@ status = "disabled"; reg-names = "nand_data", "denali_reg"; reg = <0x68000000 0x20>, <0x68100000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; interrupts = <0 65 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_nand>; diff --git a/dts/src/arm64/sprd/sc9836.dtsi b/dts/src/arm64/sprd/sc9836.dtsi index 286d7173f9..231436be0e 100644 --- a/dts/src/arm64/sprd/sc9836.dtsi +++ b/dts/src/arm64/sprd/sc9836.dtsi @@ -60,7 +60,7 @@ }; funnel@10001000 { - compatible = "arm,coresight-funnel", "arm,primecell"; + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0 0x10001000 0 0x1000>; clocks = <&clk26mhz>; clock-names = "apb_pclk"; diff --git a/dts/src/arm64/sprd/sc9860.dtsi b/dts/src/arm64/sprd/sc9860.dtsi index b25d199771..e27eb3ed1d 100644 --- a/dts/src/arm64/sprd/sc9860.dtsi +++ b/dts/src/arm64/sprd/sc9860.dtsi @@ -300,7 +300,7 @@ }; funnel@10001000 { /* SoC Funnel */ - compatible = "arm,coresight-funnel", "arm,primecell"; + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0 0x10001000 0 0x1000>; clocks = <&ext_26m>; clock-names = "apb_pclk"; @@ -367,7 +367,7 @@ }; funnel@11001000 { /* Cluster0 Funnel */ - compatible = "arm,coresight-funnel", "arm,primecell"; + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0 0x11001000 0 0x1000>; clocks = <&ext_26m>; clock-names = "apb_pclk"; @@ -415,7 +415,7 @@ }; funnel@11002000 { /* Cluster1 Funnel */ - compatible = "arm,coresight-funnel", "arm,primecell"; + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0 0x11002000 0 0x1000>; clocks = <&ext_26m>; clock-names = "apb_pclk"; @@ -513,7 +513,7 @@ }; funnel@11005000 { /* Main Funnel */ - compatible = "arm,coresight-funnel", "arm,primecell"; + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0 0x11005000 0 0x1000>; clocks = <&ext_26m>; clock-names = "apb_pclk"; diff --git a/dts/src/arm64/sprd/whale2.dtsi b/dts/src/arm64/sprd/whale2.dtsi index 4bb862c6b0..79b9591c37 100644 --- a/dts/src/arm64/sprd/whale2.dtsi +++ b/dts/src/arm64/sprd/whale2.dtsi @@ -130,6 +130,34 @@ clock-names = "enable"; clocks = <&apahb_gate CLK_DMA_EB>; }; + + sdio3: sdio@50430000 { + compatible = "sprd,sdhci-r11"; + reg = <0 0x50430000 0 0x1000>; + interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + + clock-names = "sdio", "enable", "2x_enable"; + clocks = <&aon_prediv CLK_EMMC_2X>, + <&apahb_gate CLK_EMMC_EB>, + <&aon_gate CLK_EMMC_2X_EN>; + assigned-clocks = <&aon_prediv CLK_EMMC_2X>; + assigned-clock-parents = <&clk_l0_409m6>; + + sprd,phy-delay-mmc-hs400 = <0x44 0x7f 0x2e 0x2e>; + sprd,phy-delay-mmc-hs200 = <0x0 0x8c 0x8c 0x8c>; + sprd,phy-delay-mmc-ddr52 = <0x3f 0x75 0x14 0x14>; + sprd,phy-delay-mmc-hs400es = <0x3f 0x3f 0x2e 0x2e>; + vmmc-supply = <&vddemmccore>; + bus-width = <8>; + non-removable; + no-sdio; + no-sd; + cap-mmc-hw-reset; + mmc-hs400-enhanced-strobe; + mmc-hs400-1_8v; + mmc-hs200-1_8v; + mmc-ddr-1_8v; + }; }; aon { @@ -272,4 +300,11 @@ clock-frequency = <100000000>; clock-output-names = "ext-rco-100m"; }; + + clk_l0_409m6: clk_l0_409m6 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <409600000>; + clock-output-names = "ext-409m6"; + }; }; diff --git a/dts/src/arm64/ti/k3-am65-main.dtsi b/dts/src/arm64/ti/k3-am65-main.dtsi index 752455269f..ca70ff73f1 100644 --- a/dts/src/arm64/ti/k3-am65-main.dtsi +++ b/dts/src/arm64/ti/k3-am65-main.dtsi @@ -4,6 +4,7 @@ * * Copyright (C) 2016-2018 Texas Instruments Incorporated - http://www.ti.com/ */ +#include <dt-bindings/phy/phy-am654-serdes.h> &cbass_main { msmc_ram: sram@70000000 { @@ -44,6 +45,7 @@ gic_its: gic-its@18200000 { compatible = "arm,gic-v3-its"; reg = <0x00 0x01820000 0x00 0x10000>; + socionext,synquacer-pre-its = <0x1000000 0x400000>; msi-controller; #msi-cells = <1>; }; @@ -60,6 +62,36 @@ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; }; + serdes0: serdes@900000 { + compatible = "ti,phy-am654-serdes"; + reg = <0x0 0x900000 0x0 0x2000>; + reg-names = "serdes"; + #phy-cells = <2>; + power-domains = <&k3_pds 153>; + clocks = <&k3_clks 153 4>, <&k3_clks 153 1>, <&serdes1 AM654_SERDES_LO_REFCLK>; + clock-output-names = "serdes0_cmu_refclk", "serdes0_lo_refclk", "serdes0_ro_refclk"; + assigned-clocks = <&k3_clks 153 4>, <&serdes0 AM654_SERDES_CMU_REFCLK>; + assigned-clock-parents = <&k3_clks 153 8>, <&k3_clks 153 4>; + ti,serdes-clk = <&serdes0_clk>; + #clock-cells = <1>; + mux-controls = <&serdes_mux 0>; + }; + + serdes1: serdes@910000 { + compatible = "ti,phy-am654-serdes"; + reg = <0x0 0x910000 0x0 0x2000>; + reg-names = "serdes"; + #phy-cells = <2>; + power-domains = <&k3_pds 154>; + clocks = <&serdes0 AM654_SERDES_RO_REFCLK>, <&k3_clks 154 1>, <&k3_clks 154 5>; + clock-output-names = "serdes1_cmu_refclk", "serdes1_lo_refclk", "serdes1_ro_refclk"; + assigned-clocks = <&k3_clks 154 5>, <&serdes1 AM654_SERDES_CMU_REFCLK>; + assigned-clock-parents = <&k3_clks 154 9>, <&k3_clks 154 5>; + ti,serdes-clk = <&serdes1_clk>; + #clock-cells = <1>; + mux-controls = <&serdes_mux 1>; + }; + main_uart0: serial@2800000 { compatible = "ti,am654-uart"; reg = <0x00 0x02800000 0x00 0x100>; @@ -232,6 +264,38 @@ #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x0 0x00100000 0x1c000>; + + pcie0_mode: pcie-mode@4060 { + compatible = "syscon"; + reg = <0x00004060 0x4>; + }; + + pcie1_mode: pcie-mode@4070 { + compatible = "syscon"; + reg = <0x00004070 0x4>; + }; + + pcie_devid: pcie-devid@210 { + compatible = "syscon"; + reg = <0x00000210 0x4>; + }; + + serdes0_clk: serdes_clk@4080 { + compatible = "syscon"; + reg = <0x00004080 0x4>; + }; + + serdes1_clk: serdes_clk@4090 { + compatible = "syscon"; + reg = <0x00004090 0x4>; + }; + + serdes_mux: mux-controller { + compatible = "mmio-mux"; + #mux-control-cells = <1>; + mux-reg-masks = <0x4080 0x3>, /* SERDES0 lane select */ + <0x4090 0x3>; /* SERDES1 lane select */ + }; }; dwc3_0: dwc3@4000000 { @@ -309,4 +373,141 @@ clock-names = "wkupclk", "refclk"; #phy-cells = <0>; }; + + intr_main_gpio: interrupt-controller0 { + compatible = "ti,sci-intr"; + ti,intr-trigger-type = <1>; + interrupt-controller; + interrupt-parent = <&gic500>; + #interrupt-cells = <2>; + ti,sci = <&dmsc>; + ti,sci-dst-id = <56>; + ti,sci-rm-range-girq = <0x1>; + }; + + cbass_main_navss: interconnect0 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + intr_main_navss: interrupt-controller1 { + compatible = "ti,sci-intr"; + ti,intr-trigger-type = <4>; + interrupt-controller; + interrupt-parent = <&gic500>; + #interrupt-cells = <2>; + ti,sci = <&dmsc>; + ti,sci-dst-id = <56>; + ti,sci-rm-range-girq = <0x0>, <0x2>; + }; + + inta_main_udmass: interrupt-controller@33d00000 { + compatible = "ti,sci-inta"; + reg = <0x0 0x33d00000 0x0 0x100000>; + interrupt-controller; + interrupt-parent = <&intr_main_navss>; + msi-controller; + ti,sci = <&dmsc>; + ti,sci-dev-id = <179>; + ti,sci-rm-range-vint = <0x0>; + ti,sci-rm-range-global-event = <0x1>; + }; + }; + + main_gpio0: main_gpio0@600000 { + compatible = "ti,am654-gpio", "ti,keystone-gpio"; + reg = <0x0 0x600000 0x0 0x100>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&intr_main_gpio>; + interrupts = <57 256>, <57 257>, <57 258>, <57 259>, <57 260>, + <57 261>; + interrupt-controller; + #interrupt-cells = <2>; + ti,ngpio = <96>; + ti,davinci-gpio-unbanked = <0>; + clocks = <&k3_clks 57 0>; + clock-names = "gpio"; + }; + + main_gpio1: main_gpio1@601000 { + compatible = "ti,am654-gpio", "ti,keystone-gpio"; + reg = <0x0 0x601000 0x0 0x100>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&intr_main_gpio>; + interrupts = <58 256>, <58 257>, <58 258>, <58 259>, <58 260>, + <58 261>; + interrupt-controller; + #interrupt-cells = <2>; + ti,ngpio = <90>; + ti,davinci-gpio-unbanked = <0>; + clocks = <&k3_clks 58 0>; + clock-names = "gpio"; + }; + + pcie0_rc: pcie@5500000 { + compatible = "ti,am654-pcie-rc"; + reg = <0x0 0x5500000 0x0 0x1000>, <0x0 0x5501000 0x0 0x1000>, <0x0 0x10000000 0x0 0x2000>, <0x0 0x5506000 0x0 0x1000>; + reg-names = "app", "dbics", "config", "atu"; + power-domains = <&k3_pds 120>; + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x81000000 0 0 0x0 0x10020000 0 0x00010000 + 0x82000000 0 0x10030000 0x0 0x10030000 0 0x07FD0000>; + ti,syscon-pcie-id = <&pcie_devid>; + ti,syscon-pcie-mode = <&pcie0_mode>; + bus-range = <0x0 0xff>; + num-viewport = <16>; + max-link-speed = <3>; + dma-coherent; + interrupts = <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>; + msi-map = <0x0 &gic_its 0x0 0x10000>; + }; + + pcie0_ep: pcie-ep@5500000 { + compatible = "ti,am654-pcie-ep"; + reg = <0x0 0x5500000 0x0 0x1000>, <0x0 0x5501000 0x0 0x1000>, <0x0 0x10000000 0x0 0x8000000>, <0x0 0x5506000 0x0 0x1000>; + reg-names = "app", "dbics", "addr_space", "atu"; + power-domains = <&k3_pds 120>; + ti,syscon-pcie-mode = <&pcie0_mode>; + num-ib-windows = <16>; + num-ob-windows = <16>; + max-link-speed = <3>; + dma-coherent; + interrupts = <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>; + }; + + pcie1_rc: pcie@5600000 { + compatible = "ti,am654-pcie-rc"; + reg = <0x0 0x5600000 0x0 0x1000>, <0x0 0x5601000 0x0 0x1000>, <0x0 0x18000000 0x0 0x2000>, <0x0 0x5606000 0x0 0x1000>; + reg-names = "app", "dbics", "config", "atu"; + power-domains = <&k3_pds 121>; + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x81000000 0 0 0x0 0x18020000 0 0x00010000 + 0x82000000 0 0x18030000 0x0 0x18030000 0 0x07FD0000>; + ti,syscon-pcie-id = <&pcie_devid>; + ti,syscon-pcie-mode = <&pcie1_mode>; + bus-range = <0x0 0xff>; + num-viewport = <16>; + max-link-speed = <3>; + dma-coherent; + interrupts = <GIC_SPI 355 IRQ_TYPE_EDGE_RISING>; + msi-map = <0x0 &gic_its 0x10000 0x10000>; + }; + + pcie1_ep: pcie-ep@5600000 { + compatible = "ti,am654-pcie-ep"; + reg = <0x0 0x5600000 0x0 0x1000>, <0x0 0x5601000 0x0 0x1000>, <0x0 0x18000000 0x0 0x4000000>, <0x0 0x5606000 0x0 0x1000>; + reg-names = "app", "dbics", "addr_space", "atu"; + power-domains = <&k3_pds 121>; + ti,syscon-pcie-mode = <&pcie1_mode>; + num-ib-windows = <16>; + num-ob-windows = <16>; + max-link-speed = <3>; + dma-coherent; + interrupts = <GIC_SPI 355 IRQ_TYPE_EDGE_RISING>; + }; }; diff --git a/dts/src/arm64/ti/k3-am65-mcu.dtsi b/dts/src/arm64/ti/k3-am65-mcu.dtsi index 6f7d2b316d..afc29eaa26 100644 --- a/dts/src/arm64/ti/k3-am65-mcu.dtsi +++ b/dts/src/arm64/ti/k3-am65-mcu.dtsi @@ -17,6 +17,14 @@ power-domains = <&k3_pds 149>; }; + mcu_ram: sram@41c00000 { + compatible = "mmio-sram"; + reg = <0x00 0x41c00000 0x00 0x80000>; + ranges = <0x0 0x00 0x41c00000 0x80000>; + #address-cells = <1>; + #size-cells = <1>; + }; + mcu_i2c0: i2c@40b00000 { compatible = "ti,am654-i2c", "ti,omap4-i2c"; reg = <0x0 0x40b00000 0x0 0x100>; diff --git a/dts/src/arm64/ti/k3-am65-wakeup.dtsi b/dts/src/arm64/ti/k3-am65-wakeup.dtsi index 7cbdc0912a..9cf2c0849a 100644 --- a/dts/src/arm64/ti/k3-am65-wakeup.dtsi +++ b/dts/src/arm64/ti/k3-am65-wakeup.dtsi @@ -7,7 +7,7 @@ &cbass_wakeup { dmsc: dmsc { - compatible = "ti,k2g-sci"; + compatible = "ti,am654-sci"; ti,host-id = <12>; #address-cells = <1>; #size-cells = <1>; @@ -63,4 +63,30 @@ clocks = <&k3_clks 115 1>; power-domains = <&k3_pds 115>; }; + + intr_wkup_gpio: interrupt-controller2 { + compatible = "ti,sci-intr"; + ti,intr-trigger-type = <1>; + interrupt-controller; + interrupt-parent = <&gic500>; + #interrupt-cells = <2>; + ti,sci = <&dmsc>; + ti,sci-dst-id = <56>; + ti,sci-rm-range-girq = <0x4>; + }; + + wkup_gpio0: wkup_gpio0@42110000 { + compatible = "ti,am654-gpio", "ti,keystone-gpio"; + reg = <0x42110000 0x100>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&intr_wkup_gpio>; + interrupts = <59 128>, <59 129>, <59 130>, <59 131>; + interrupt-controller; + #interrupt-cells = <2>; + ti,ngpio = <56>; + ti,davinci-gpio-unbanked = <0>; + clocks = <&k3_clks 59 0>; + clock-names = "gpio"; + }; }; diff --git a/dts/src/arm64/ti/k3-am65.dtsi b/dts/src/arm64/ti/k3-am65.dtsi index 50f4be2047..82edf10b23 100644 --- a/dts/src/arm64/ti/k3-am65.dtsi +++ b/dts/src/arm64/ti/k3-am65.dtsi @@ -68,9 +68,14 @@ <0x00 0x00900000 0x00 0x00900000 0x00 0x00012000>, /* serdes */ <0x00 0x01000000 0x00 0x01000000 0x00 0x0af02400>, /* Most peripherals */ <0x00 0x30800000 0x00 0x30800000 0x00 0x0bc00000>, /* MAIN NAVSS */ + <0x00 0x70000000 0x00 0x70000000 0x00 0x00200000>, /* MSMC SRAM */ + <0x00 0x10000000 0x00 0x10000000 0x00 0x10000000>, /* PCIe DAT */ /* MCUSS Range */ <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>, <0x00 0x40200000 0x00 0x40200000 0x00 0x00900100>, + <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>, + <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>, + <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00080000>, <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>, <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>, <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, @@ -82,6 +87,9 @@ #size-cells = <2>; ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>, /* MCU NAVSS*/ <0x00 0x40200000 0x00 0x40200000 0x00 0x00900100>, /* First peripheral window */ + <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>, /* MCU R5F Core0 */ + <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>, /* MCU R5F Core1 */ + <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00080000>, /* MCU SRAM */ <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>, /* WKUP */ <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>, /* MMRs, remaining NAVSS */ <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, /* CPSW */ diff --git a/dts/src/arm64/ti/k3-am654-base-board.dts b/dts/src/arm64/ti/k3-am654-base-board.dts index cf1aa276a1..52c245d36d 100644 --- a/dts/src/arm64/ti/k3-am654-base-board.dts +++ b/dts/src/arm64/ti/k3-am654-base-board.dts @@ -6,6 +6,7 @@ /dts-v1/; #include "k3-am654.dtsi" +#include <dt-bindings/input/input.h> / { compatible = "ti,am654-evm", "ti,am654"; @@ -33,6 +34,25 @@ no-map; }; }; + + gpio-keys { + compatible = "gpio-keys"; + autorepeat; + pinctrl-names = "default"; + pinctrl-0 = <&push_button_pins_default>; + + sw5 { + label = "GPIO Key USER1"; + linux,code = <BTN_0>; + gpios = <&wkup_gpio0 24 GPIO_ACTIVE_LOW>; + }; + + sw6 { + label = "GPIO Key USER2"; + linux,code = <BTN_1>; + gpios = <&wkup_gpio0 27 GPIO_ACTIVE_LOW>; + }; + }; }; &wkup_pmx0 { @@ -42,6 +62,13 @@ AM65X_WKUP_IOPAD(0x00e4, PIN_INPUT, 0) /* (AD6) WKUP_I2C0_SDA */ >; }; + + push_button_pins_default: push_button__pins_default { + pinctrl-single,pins = < + AM65X_WKUP_IOPAD(0x0030, PIN_INPUT, 7) /* (R5) WKUP_GPIO0_24 */ + AM65X_WKUP_IOPAD(0x003c, PIN_INPUT, 7) /* (P2) WKUP_GPIO0_27 */ + >; + }; }; &main_pmx0 { @@ -228,3 +255,27 @@ ti,adc-channels = <0 1 2 3 4 5 6 7>; }; }; + +&serdes0 { + status = "disabled"; +}; + +&serdes1 { + status = "disabled"; +}; + +&pcie0_rc { + status = "disabled"; +}; + +&pcie0_ep { + status = "disabled"; +}; + +&pcie1_rc { + status = "disabled"; +}; + +&pcie1_ep { + status = "disabled"; +}; diff --git a/dts/src/arm64/ti/k3-j721e-common-proc-board.dts b/dts/src/arm64/ti/k3-j721e-common-proc-board.dts new file mode 100644 index 0000000000..c680123f06 --- /dev/null +++ b/dts/src/arm64/ti/k3-j721e-common-proc-board.dts @@ -0,0 +1,50 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/ + */ + +/dts-v1/; + +#include "k3-j721e-som-p0.dtsi" + +/ { + chosen { + stdout-path = "serial2:115200n8"; + bootargs = "console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000"; + }; +}; + +&wkup_uart0 { + /* Wakeup UART is used by System firmware */ + status = "disabled"; +}; + +&main_uart3 { + /* UART not brought out */ + status = "disabled"; +}; + +&main_uart5 { + /* UART not brought out */ + status = "disabled"; +}; + +&main_uart6 { + /* UART not brought out */ + status = "disabled"; +}; + +&main_uart7 { + /* UART not brought out */ + status = "disabled"; +}; + +&main_uart8 { + /* UART not brought out */ + status = "disabled"; +}; + +&main_uart9 { + /* UART not brought out */ + status = "disabled"; +}; diff --git a/dts/src/arm64/ti/k3-j721e-main.dtsi b/dts/src/arm64/ti/k3-j721e-main.dtsi new file mode 100644 index 0000000000..a01308142f --- /dev/null +++ b/dts/src/arm64/ti/k3-j721e-main.dtsi @@ -0,0 +1,243 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for J721E SoC Family Main Domain peripherals + * + * Copyright (C) 2016-2019 Texas Instruments Incorporated - http://www.ti.com/ + */ + +&cbass_main { + msmc_ram: sram@70000000 { + compatible = "mmio-sram"; + reg = <0x0 0x70000000 0x0 0x800000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x70000000 0x800000>; + + atf-sram@0 { + reg = <0x0 0x20000>; + }; + }; + + gic500: interrupt-controller@1800000 { + compatible = "arm,gic-v3"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x00 0x01800000 0x00 0x10000>, /* GICD */ + <0x00 0x01900000 0x00 0x100000>; /* GICR */ + + /* vcpumntirq: virtual CPU interface maintenance interrupt */ + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + + gic_its: gic-its@18200000 { + compatible = "arm,gic-v3-its"; + reg = <0x00 0x01820000 0x00 0x10000>; + socionext,synquacer-pre-its = <0x1000000 0x400000>; + msi-controller; + #msi-cells = <1>; + }; + }; + + smmu0: smmu@36600000 { + compatible = "arm,smmu-v3"; + reg = <0x0 0x36600000 0x0 0x100000>; + interrupt-parent = <&gic500>; + interrupts = <GIC_SPI 772 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 768 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "eventq", "gerror"; + #iommu-cells = <1>; + }; + + main_gpio_intr: interrupt-controller0 { + compatible = "ti,sci-intr"; + ti,intr-trigger-type = <1>; + interrupt-controller; + interrupt-parent = <&gic500>; + #interrupt-cells = <2>; + ti,sci = <&dmsc>; + ti,sci-dst-id = <14>; + ti,sci-rm-range-girq = <0x1>; + }; + + cbass_main_navss: interconnect0 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + main_navss_intr: interrupt-controller1 { + compatible = "ti,sci-intr"; + ti,intr-trigger-type = <4>; + interrupt-controller; + interrupt-parent = <&gic500>; + #interrupt-cells = <2>; + ti,sci = <&dmsc>; + ti,sci-dst-id = <14>; + ti,sci-rm-range-girq = <0>, <2>; + }; + + main_udmass_inta: interrupt-controller@33d00000 { + compatible = "ti,sci-inta"; + reg = <0x0 0x33d00000 0x0 0x100000>; + interrupt-controller; + interrupt-parent = <&main_navss_intr>; + msi-controller; + ti,sci = <&dmsc>; + ti,sci-dev-id = <209>; + ti,sci-rm-range-vint = <0xa>; + ti,sci-rm-range-global-event = <0xd>; + }; + }; + + secure_proxy_main: mailbox@32c00000 { + compatible = "ti,am654-secure-proxy"; + #mbox-cells = <1>; + reg-names = "target_data", "rt", "scfg"; + reg = <0x00 0x32c00000 0x00 0x100000>, + <0x00 0x32400000 0x00 0x100000>, + <0x00 0x32800000 0x00 0x100000>; + interrupt-names = "rx_011"; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + }; + + main_pmx0: pinmux@11c000 { + compatible = "pinctrl-single"; + /* Proxy 0 addressing */ + reg = <0x0 0x11c000 0x0 0x2b4>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0xffffffff>; + }; + + main_uart0: serial@2800000 { + compatible = "ti,j721e-uart", "ti,am654-uart"; + reg = <0x00 0x02800000 0x00 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + current-speed = <115200>; + power-domains = <&k3_pds 146>; + clocks = <&k3_clks 146 0>; + clock-names = "fclk"; + }; + + main_uart1: serial@2810000 { + compatible = "ti,j721e-uart", "ti,am654-uart"; + reg = <0x00 0x02810000 0x00 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + current-speed = <115200>; + power-domains = <&k3_pds 278>; + clocks = <&k3_clks 278 0>; + clock-names = "fclk"; + }; + + main_uart2: serial@2820000 { + compatible = "ti,j721e-uart", "ti,am654-uart"; + reg = <0x00 0x02820000 0x00 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + current-speed = <115200>; + power-domains = <&k3_pds 279>; + clocks = <&k3_clks 279 0>; + clock-names = "fclk"; + }; + + main_uart3: serial@2830000 { + compatible = "ti,j721e-uart", "ti,am654-uart"; + reg = <0x00 0x02830000 0x00 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + current-speed = <115200>; + power-domains = <&k3_pds 280>; + clocks = <&k3_clks 280 0>; + clock-names = "fclk"; + }; + + main_uart4: serial@2840000 { + compatible = "ti,j721e-uart", "ti,am654-uart"; + reg = <0x00 0x02840000 0x00 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + current-speed = <115200>; + power-domains = <&k3_pds 281>; + clocks = <&k3_clks 281 0>; + clock-names = "fclk"; + }; + + main_uart5: serial@2850000 { + compatible = "ti,j721e-uart", "ti,am654-uart"; + reg = <0x00 0x02850000 0x00 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + current-speed = <115200>; + power-domains = <&k3_pds 282>; + clocks = <&k3_clks 282 0>; + clock-names = "fclk"; + }; + + main_uart6: serial@2860000 { + compatible = "ti,j721e-uart", "ti,am654-uart"; + reg = <0x00 0x02860000 0x00 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + current-speed = <115200>; + power-domains = <&k3_pds 283>; + clocks = <&k3_clks 283 0>; + clock-names = "fclk"; + }; + + main_uart7: serial@2870000 { + compatible = "ti,j721e-uart", "ti,am654-uart"; + reg = <0x00 0x02870000 0x00 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + current-speed = <115200>; + power-domains = <&k3_pds 284>; + clocks = <&k3_clks 284 0>; + clock-names = "fclk"; + }; + + main_uart8: serial@2880000 { + compatible = "ti,j721e-uart", "ti,am654-uart"; + reg = <0x00 0x02880000 0x00 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + current-speed = <115200>; + power-domains = <&k3_pds 285>; + clocks = <&k3_clks 285 0>; + clock-names = "fclk"; + }; + + main_uart9: serial@2890000 { + compatible = "ti,j721e-uart", "ti,am654-uart"; + reg = <0x00 0x02890000 0x00 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + current-speed = <115200>; + power-domains = <&k3_pds 286>; + clocks = <&k3_clks 286 0>; + clock-names = "fclk"; + }; +}; diff --git a/dts/src/arm64/ti/k3-j721e-mcu-wakeup.dtsi b/dts/src/arm64/ti/k3-j721e-mcu-wakeup.dtsi new file mode 100644 index 0000000000..07b58eeebc --- /dev/null +++ b/dts/src/arm64/ti/k3-j721e-mcu-wakeup.dtsi @@ -0,0 +1,90 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for J721E SoC Family MCU/WAKEUP Domain peripherals + * + * Copyright (C) 2016-2019 Texas Instruments Incorporated - http://www.ti.com/ + */ + +&cbass_mcu_wakeup { + dmsc: dmsc@44083000 { + compatible = "ti,k2g-sci"; + ti,host-id = <12>; + + mbox-names = "rx", "tx"; + + mboxes= <&secure_proxy_main 11>, + <&secure_proxy_main 13>; + + reg-names = "debug_messages"; + reg = <0x00 0x44083000 0x0 0x1000>; + + k3_pds: power-controller { + compatible = "ti,sci-pm-domain"; + #power-domain-cells = <1>; + }; + + k3_clks: clocks { + compatible = "ti,k2g-sci-clk"; + #clock-cells = <2>; + }; + + k3_reset: reset-controller { + compatible = "ti,sci-reset"; + #reset-cells = <2>; + }; + }; + + wkup_pmx0: pinmux@4301c000 { + compatible = "pinctrl-single"; + /* Proxy 0 addressing */ + reg = <0x00 0x4301c000 0x00 0x178>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0xffffffff>; + }; + + mcu_ram: sram@41c00000 { + compatible = "mmio-sram"; + reg = <0x00 0x41c00000 0x00 0x100000>; + ranges = <0x0 0x00 0x41c00000 0x100000>; + #address-cells = <1>; + #size-cells = <1>; + }; + + wkup_uart0: serial@42300000 { + compatible = "ti,j721e-uart", "ti,am654-uart"; + reg = <0x00 0x42300000 0x00 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 897 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + current-speed = <115200>; + power-domains = <&k3_pds 287>; + clocks = <&k3_clks 287 0>; + clock-names = "fclk"; + }; + + mcu_uart0: serial@40a00000 { + compatible = "ti,j721e-uart", "ti,am654-uart"; + reg = <0x00 0x40a00000 0x00 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 846 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <96000000>; + current-speed = <115200>; + power-domains = <&k3_pds 149>; + clocks = <&k3_clks 149 0>; + clock-names = "fclk"; + }; + + wkup_gpio_intr: interrupt-controller2 { + compatible = "ti,sci-intr"; + ti,intr-trigger-type = <1>; + interrupt-controller; + interrupt-parent = <&gic500>; + #interrupt-cells = <2>; + ti,sci = <&dmsc>; + ti,sci-dst-id = <14>; + ti,sci-rm-range-girq = <0x5>; + }; +}; diff --git a/dts/src/arm64/ti/k3-j721e-som-p0.dtsi b/dts/src/arm64/ti/k3-j721e-som-p0.dtsi new file mode 100644 index 0000000000..1884fc7014 --- /dev/null +++ b/dts/src/arm64/ti/k3-j721e-som-p0.dtsi @@ -0,0 +1,29 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/ + */ + +/dts-v1/; + +#include "k3-j721e.dtsi" + +/ { + memory@80000000 { + device_type = "memory"; + /* 4G RAM */ + reg = <0x00000000 0x80000000 0x00000000 0x80000000>, + <0x00000008 0x80000000 0x00000000 0x80000000>; + }; + + reserved_memory: reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + secure_ddr: optee@9e800000 { + reg = <0x00 0x9e800000 0x00 0x01800000>; + alignment = <0x1000>; + no-map; + }; + }; +}; diff --git a/dts/src/arm64/ti/k3-j721e.dtsi b/dts/src/arm64/ti/k3-j721e.dtsi new file mode 100644 index 0000000000..f8dd74b17b --- /dev/null +++ b/dts/src/arm64/ti/k3-j721e.dtsi @@ -0,0 +1,177 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for J721E SoC Family + * + * Copyright (C) 2016-2019 Texas Instruments Incorporated - http://www.ti.com/ + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/pinctrl/k3.h> + +/ { + model = "Texas Instruments K3 J721E SoC"; + compatible = "ti,j721e"; + interrupt-parent = <&gic500>; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + serial0 = &wkup_uart0; + serial1 = &mcu_uart0; + serial2 = &main_uart0; + serial3 = &main_uart1; + serial4 = &main_uart2; + serial5 = &main_uart3; + serial6 = &main_uart4; + serial7 = &main_uart5; + serial8 = &main_uart6; + serial9 = &main_uart7; + serial10 = &main_uart8; + serial11 = &main_uart9; + }; + + chosen { }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + cpu-map { + cluster0: cluster0 { + core0 { + cpu = <&cpu0>; + }; + + core1 { + cpu = <&cpu1>; + }; + }; + + }; + + cpu0: cpu@0 { + compatible = "arm,cortex-a72"; + reg = <0x000>; + device_type = "cpu"; + enable-method = "psci"; + i-cache-size = <0xC000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&L2_0>; + }; + + cpu1: cpu@1 { + compatible = "arm,cortex-a72"; + reg = <0x001>; + device_type = "cpu"; + enable-method = "psci"; + i-cache-size = <0xC000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&L2_0>; + }; + }; + + L2_0: l2-cache0 { + compatible = "cache"; + cache-level = <2>; + cache-size = <0x100000>; + cache-line-size = <64>; + cache-sets = <2048>; + next-level-cache = <&msmc_l3>; + }; + + msmc_l3: l3-cache0 { + compatible = "cache"; + cache-level = <3>; + }; + + firmware { + optee { + compatible = "linaro,optee-tz"; + method = "smc"; + }; + + psci: psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + }; + + a72_timer0: timer-cl0-cpu0 { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* cntpsirq */ + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* cntpnsirq */ + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* cntvirq */ + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* cnthpirq */ + }; + + pmu: pmu { + compatible = "arm,armv8-pmuv3"; + /* Recommendation from GIC500 TRM Table A.3 */ + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; + }; + + cbass_main: interconnect@100000 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x00 0x00100000 0x00 0x00100000 0x00 0x00020000>, /* ctrl mmr */ + <0x00 0x00600000 0x00 0x00600000 0x00 0x00031100>, /* GPIO */ + <0x00 0x00900000 0x00 0x00900000 0x00 0x00012000>, /* serdes */ + <0x00 0x00A40000 0x00 0x00A40000 0x00 0x00000800>, /* timesync router */ + <0x00 0x01000000 0x00 0x01000000 0x00 0x0af02400>, /* Most peripherals */ + <0x00 0x30800000 0x00 0x30800000 0x00 0x0bc00000>, /* MAIN NAVSS */ + <0x00 0x0d000000 0x00 0x0d000000 0x00 0x01000000>, /* PCIe Core*/ + <0x00 0x10000000 0x00 0x10000000 0x00 0x10000000>, /* PCIe DAT */ + <0x00 0x64800000 0x00 0x64800000 0x00 0x00800000>, /* C71 */ + <0x4d 0x80800000 0x4d 0x80800000 0x00 0x00800000>, /* C66_0 */ + <0x4d 0x81800000 0x4d 0x81800000 0x00 0x00800000>, /* C66_1 */ + <0x4e 0x20000000 0x4e 0x20000000 0x00 0x00080000>, /* GPU */ + <0x00 0x70000000 0x00 0x70000000 0x00 0x00800000>, /* MSMC RAM */ + + /* MCUSS_WKUP Range */ + <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>, + <0x00 0x40200000 0x00 0x40200000 0x00 0x00998400>, + <0x00 0x40f00000 0x00 0x40f00000 0x00 0x00020000>, + <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>, + <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>, + <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00100000>, + <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>, + <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>, + <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, + <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>, + <0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>, + <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>, + <0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>; + + cbass_mcu_wakeup: interconnect@28380000 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>, /* MCU NAVSS*/ + <0x00 0x40200000 0x00 0x40200000 0x00 0x00998400>, /* First peripheral window */ + <0x00 0x40f00000 0x00 0x40f00000 0x00 0x00020000>, /* CTRL_MMR0 */ + <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>, /* MCU R5F Core0 */ + <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>, /* MCU R5F Core1 */ + <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00100000>, /* MCU SRAM */ + <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>, /* WKUP peripheral window */ + <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>, /* MMRs, remaining NAVSS */ + <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, /* CPSW */ + <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>, /* OSPI register space */ + <0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>, /* FSS OSPI0/1 data region 0 */ + <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>, /* FSS OSPI0 data region 3 */ + <0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>; /* FSS OSPI1 data region 3*/ + }; + }; +}; + +/* Now include the peripherals for each bus segments */ +#include "k3-j721e-main.dtsi" +#include "k3-j721e-mcu-wakeup.dtsi" diff --git a/dts/src/mips/mscc/ocelot.dtsi b/dts/src/mips/mscc/ocelot.dtsi index 90c60d42f5..33ae74aaa1 100644 --- a/dts/src/mips/mscc/ocelot.dtsi +++ b/dts/src/mips/mscc/ocelot.dtsi @@ -132,11 +132,12 @@ <0x1270000 0x100>, <0x1280000 0x100>, <0x1800000 0x80000>, - <0x1880000 0x10000>; + <0x1880000 0x10000>, + <0x1060000 0x10000>; reg-names = "sys", "rew", "qs", "port0", "port1", "port2", "port3", "port4", "port5", "port6", "port7", "port8", "port9", "port10", "qsys", - "ana"; + "ana", "s2"; interrupts = <21 22>; interrupt-names = "xtr", "inj"; diff --git a/dts/src/mips/qca/ar9331.dtsi b/dts/src/mips/qca/ar9331.dtsi index 2bae201aa3..63a9f33aa4 100644 --- a/dts/src/mips/qca/ar9331.dtsi +++ b/dts/src/mips/qca/ar9331.dtsi @@ -116,6 +116,32 @@ }; }; + eth0: ethernet@19000000 { + compatible = "qca,ar9330-eth"; + reg = <0x19000000 0x200>; + interrupts = <4>; + + resets = <&rst 9>, <&rst 22>; + reset-names = "mac", "mdio"; + clocks = <&pll ATH79_CLK_AHB>, <&pll ATH79_CLK_AHB>; + clock-names = "eth", "mdio"; + + status = "disabled"; + }; + + eth1: ethernet@1a000000 { + compatible = "qca,ar9330-eth"; + reg = <0x1a000000 0x200>; + interrupts = <5>; + + resets = <&rst 13>, <&rst 23>; + reset-names = "mac", "mdio"; + clocks = <&pll ATH79_CLK_AHB>, <&pll ATH79_CLK_AHB>; + clock-names = "eth", "mdio"; + + status = "disabled"; + }; + usb: usb@1b000100 { compatible = "chipidea,usb2"; reg = <0x1b000000 0x200>; diff --git a/dts/src/mips/qca/ar9331_dpt_module.dts b/dts/src/mips/qca/ar9331_dpt_module.dts index e7af2cf5f4..77bab823eb 100644 --- a/dts/src/mips/qca/ar9331_dpt_module.dts +++ b/dts/src/mips/qca/ar9331_dpt_module.dts @@ -76,3 +76,11 @@ reg = <0>; }; }; + +ð0 { + status = "okay"; +}; + +ð1 { + status = "okay"; +}; diff --git a/dts/src/mips/ralink/mt7628a.dtsi b/dts/src/mips/ralink/mt7628a.dtsi index 9ff7e8faae..61f8621e88 100644 --- a/dts/src/mips/ralink/mt7628a.dtsi +++ b/dts/src/mips/ralink/mt7628a.dtsi @@ -1,3 +1,5 @@ +// SPDX-License-Identifier: GPL-2.0 + / { #address-cells = <1>; #size-cells = <1>; @@ -36,7 +38,113 @@ sysc: system-controller@0 { compatible = "ralink,mt7620a-sysc", "syscon"; - reg = <0x0 0x100>; + reg = <0x0 0x60>; + }; + + pinmux: pinmux@60 { + compatible = "pinctrl-single"; + reg = <0x60 0x8>; + #address-cells = <1>; + #size-cells = <0>; + #pinctrl-cells = <2>; + pinctrl-single,bit-per-mux; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0x1>; + + pinmux_gpio_gpio: pinmux_gpio_gpio { + pinctrl-single,bits = <0x0 0x0 0x3>; + }; + + pinmux_spi_cs1_cs: pinmux_spi_cs1_cs { + pinctrl-single,bits = <0x0 0x0 0x30>; + }; + + pinmux_i2s_gpio: pinmux_i2s_gpio { + pinctrl-single,bits = <0x0 0x40 0xc0>; + }; + + pinmux_uart0_uart: pinmux_uart0_uart0 { + pinctrl-single,bits = <0x0 0x0 0x300>; + }; + + pinmux_sdmode_sdxc: pinmux_sdmode_sdxc { + pinctrl-single,bits = <0x0 0x0 0xc00>; + }; + + pinmux_sdmode_gpio: pinmux_sdmode_gpio { + pinctrl-single,bits = <0x0 0x400 0xc00>; + }; + + pinmux_spi_spi: pinmux_spi_spi { + pinctrl-single,bits = <0x0 0x0 0x1000>; + }; + + pinmux_refclk_gpio: pinmux_refclk_gpio { + pinctrl-single,bits = <0x0 0x40000 0x40000>; + }; + + pinmux_i2c_i2c: pinmux_i2c_i2c { + pinctrl-single,bits = <0x0 0x0 0x300000>; + }; + + pinmux_uart1_uart: pinmux_uart1_uart1 { + pinctrl-single,bits = <0x0 0x0 0x3000000>; + }; + + pinmux_uart2_uart: pinmux_uart2_uart { + pinctrl-single,bits = <0x0 0x0 0xc000000>; + }; + + pinmux_pwm0_pwm: pinmux_pwm0_pwm { + pinctrl-single,bits = <0x0 0x0 0x30000000>; + }; + + pinmux_pwm0_gpio: pinmux_pwm0_gpio { + pinctrl-single,bits = <0x0 0x10000000 + 0x30000000>; + }; + + pinmux_pwm1_pwm: pinmux_pwm1_pwm { + pinctrl-single,bits = <0x0 0x0 0xc0000000>; + }; + + pinmux_pwm1_gpio: pinmux_pwm1_gpio { + pinctrl-single,bits = <0x0 0x40000000 + 0xc0000000>; + }; + + pinmux_p0led_an_gpio: pinmux_p0led_an_gpio { + pinctrl-single,bits = <0x4 0x4 0xc>; + }; + + pinmux_p1led_an_gpio: pinmux_p1led_an_gpio { + pinctrl-single,bits = <0x4 0x10 0x30>; + }; + + pinmux_p2led_an_gpio: pinmux_p2led_an_gpio { + pinctrl-single,bits = <0x4 0x40 0xc0>; + }; + + pinmux_p3led_an_gpio: pinmux_p3led_an_gpio { + pinctrl-single,bits = <0x4 0x100 0x300>; + }; + + pinmux_p4led_an_gpio: pinmux_p4led_an_gpio { + pinctrl-single,bits = <0x4 0x400 0xc00>; + }; + }; + + watchdog: watchdog@100 { + compatible = "mediatek,mt7621-wdt"; + reg = <0x100 0x30>; + + resets = <&resetc 8>; + reset-names = "wdt"; + + interrupt-parent = <&intc>; + interrupts = <24>; + + status = "disabled"; }; intc: interrupt-controller@200 { @@ -62,10 +170,42 @@ reg = <0x300 0x100>; }; + gpio: gpio@600 { + compatible = "mediatek,mt7621-gpio"; + reg = <0x600 0x100>; + + gpio-controller; + interrupt-controller; + #gpio-cells = <2>; + #interrupt-cells = <2>; + + interrupt-parent = <&intc>; + interrupts = <6>; + }; + + spi: spi@b00 { + compatible = "ralink,mt7621-spi"; + reg = <0xb00 0x100>; + + pinctrl-names = "default"; + pinctrl-0 = <&pinmux_spi_spi>; + + resets = <&resetc 18>; + reset-names = "spi"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + uart0: uartlite@c00 { compatible = "ns16550a"; reg = <0xc00 0x100>; + pinctrl-names = "default"; + pinctrl-0 = <&pinmux_uart0_uart>; + resets = <&resetc 12>; reset-names = "uart0"; @@ -79,6 +219,9 @@ compatible = "ns16550a"; reg = <0xd00 0x100>; + pinctrl-names = "default"; + pinctrl-0 = <&pinmux_uart1_uart>; + resets = <&resetc 19>; reset-names = "uart1"; @@ -92,6 +235,9 @@ compatible = "ns16550a"; reg = <0xe00 0x100>; + pinctrl-names = "default"; + pinctrl-0 = <&pinmux_uart2_uart>; + resets = <&resetc 20>; reset-names = "uart2"; diff --git a/dts/src/riscv/sifive/fu540-c000.dtsi b/dts/src/riscv/sifive/fu540-c000.dtsi index 3c06ee4b2b..42b5ec2231 100644 --- a/dts/src/riscv/sifive/fu540-c000.dtsi +++ b/dts/src/riscv/sifive/fu540-c000.dtsi @@ -21,7 +21,6 @@ cpus { #address-cells = <1>; #size-cells = <0>; - timebase-frequency = <1000000>; cpu0: cpu@0 { compatible = "sifive,e51", "sifive,rocket0", "riscv"; device_type = "cpu"; @@ -163,6 +162,7 @@ interrupt-parent = <&plic0>; interrupts = <4>; clocks = <&prci PRCI_CLK_TLCLK>; + status = "disabled"; }; uart1: serial@10011000 { compatible = "sifive,fu540-c000-uart", "sifive,uart0"; @@ -170,6 +170,7 @@ interrupt-parent = <&plic0>; interrupts = <5>; clocks = <&prci PRCI_CLK_TLCLK>; + status = "disabled"; }; i2c0: i2c@10030000 { compatible = "sifive,fu540-c000-i2c", "sifive,i2c0"; @@ -181,6 +182,7 @@ reg-io-width = <1>; #address-cells = <1>; #size-cells = <0>; + status = "disabled"; }; qspi0: spi@10040000 { compatible = "sifive,fu540-c000-spi", "sifive,spi0"; @@ -191,6 +193,7 @@ clocks = <&prci PRCI_CLK_TLCLK>; #address-cells = <1>; #size-cells = <0>; + status = "disabled"; }; qspi1: spi@10041000 { compatible = "sifive,fu540-c000-spi", "sifive,spi0"; @@ -201,6 +204,7 @@ clocks = <&prci PRCI_CLK_TLCLK>; #address-cells = <1>; #size-cells = <0>; + status = "disabled"; }; qspi2: spi@10050000 { compatible = "sifive,fu540-c000-spi", "sifive,spi0"; @@ -210,6 +214,22 @@ clocks = <&prci PRCI_CLK_TLCLK>; #address-cells = <1>; #size-cells = <0>; + status = "disabled"; + }; + eth0: ethernet@10090000 { + compatible = "sifive,fu540-c000-gem"; + interrupt-parent = <&plic0>; + interrupts = <53>; + reg = <0x0 0x10090000 0x0 0x2000 + 0x0 0x100a0000 0x0 0x1000>; + local-mac-address = [00 00 00 00 00 00]; + clock-names = "pclk", "hclk"; + clocks = <&prci PRCI_CLK_GEMGXLPLL>, + <&prci PRCI_CLK_GEMGXLPLL>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; }; + }; }; diff --git a/dts/src/riscv/sifive/hifive-unleashed-a00.dts b/dts/src/riscv/sifive/hifive-unleashed-a00.dts index 4da88707e2..93d68cbd64 100644 --- a/dts/src/riscv/sifive/hifive-unleashed-a00.dts +++ b/dts/src/riscv/sifive/hifive-unleashed-a00.dts @@ -42,7 +42,20 @@ }; }; +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; +}; + &qspi0 { + status = "okay"; flash@0 { compatible = "issi,is25wp256", "jedec,spi-nor"; reg = <0>; @@ -63,3 +76,12 @@ disable-wp; }; }; + +ð0 { + status = "okay"; + phy-mode = "gmii"; + phy-handle = <&phy0>; + phy0: ethernet-phy@0 { + reg = <0>; + }; +}; diff --git a/dts/src/xtensa/virt.dts b/dts/src/xtensa/virt.dts new file mode 100644 index 0000000000..6aecbc0f35 --- /dev/null +++ b/dts/src/xtensa/virt.dts @@ -0,0 +1,72 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; + +/ { + compatible = "cdns,xtensa-iss"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&pic>; + + chosen { + bootargs = "console=ttyS0,115200n8 debug"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x80000000>; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + cpu@0 { + compatible = "cdns,xtensa-cpu"; + reg = <0>; + clocks = <&osc>; + }; + }; + + clocks { + osc: osc { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <40000000>; + }; + }; + + pic: pic { + compatible = "cdns,xtensa-pic"; + /* one cell: internal irq number, + * two cells: second cell == 0: internal irq number + * second cell == 1: external irq number + */ + #address-cells = <0>; + #interrupt-cells = <2>; + interrupt-controller; + }; + + pci { + compatible = "pci-host-ecam-generic"; + device_type = "pci"; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <0x1>; + + bus-range = <0x0 0x3f>; + reg = <0xc0000000 0x04000000>; + + // BUS_ADDRESS(3) CPU_PHYSICAL(1) SIZE(2) + ranges = <0x01000000 0x0 0xc4000000 0xc4000000 0x0 0x04000000>, + <0x02000000 0x0 0xc8000000 0xc8000000 0x0 0x18000000>; + + // PCI_DEVICE(3) INT#(1) CONTROLLER(PHANDLE) CONTROLLER_DATA(2) + interrupt-map = < + 0x0000 0x0 0x0 0x1 &pic 0x0 0x1 + 0x0800 0x0 0x0 0x1 &pic 0x1 0x1 + 0x1000 0x0 0x0 0x1 &pic 0x2 0x1 + 0x1800 0x0 0x0 0x1 &pic 0x3 0x1 + >; + + interrupt-map-mask = <0x1800 0x0 0x0 0x7>; + }; +}; diff --git a/fs/fat/ff.c b/fs/fat/ff.c index ba4adfc133..4d30433e5f 100644 --- a/fs/fat/ff.c +++ b/fs/fat/ff.c @@ -1538,7 +1538,7 @@ static enum filetype check_fs ( /* 0:The FAT BR, 1:Valid BR but not an FAT, 2:No DWORD *bootsec ) { - enum filetype ret; + DRESULT ret; /* Load boot record */ ret = disk_read(fs, fs->win, sect, 1); @@ -1023,6 +1023,10 @@ static int nfs_readlink_req(struct nfs_priv *npriv, struct nfs_fh *fh, p = nfs_read_post_op_attr(p, NULL); len = ntoh32(net_read_uint32(p)); /* new path length */ + + len = max_t(unsigned int, len, + nfs_packet->len - sizeof(struct rpc_reply) - sizeof(uint32_t)); + p++; *target = xzalloc(len + 1); diff --git a/fs/omap4_usbbootfs.c b/fs/omap4_usbbootfs.c index 169cde7ddb..4f159210d1 100644 --- a/fs/omap4_usbbootfs.c +++ b/fs/omap4_usbbootfs.c @@ -29,39 +29,6 @@ struct file_priv { s32 id; u32 size; }; -/* -static int omap4_usbbootfs_create( - struct device_d *dev, const char *pathname, mode_t mode) -{ - return -ENOSYS; -} - -static int omap4_usbbootfs_unlink(struct device_d *dev, const char *pathname) -{ - return -ENOSYS; -} - -static int omap4_usbbootfs_mkdir(struct device_d *dev, const char *pathname) -{ - return -ENOSYS; -} - -static int omap4_usbbootfs_rmdir(struct device_d *dev, const char *pathname) -{ - return -ENOSYS; -} - -static int omap4_usbbootfs_write( - struct device_d *_dev, FILE *f, const void *inbuf, size_t size) -{ - return -ENOSYS; -} - -static int omap4_usbbootfs_truncate(struct device_d *dev, FILE *f, loff_t size) -{ - return -ENOSYS; -} -*/ static struct file_priv *omap4_usbbootfs_do_open( struct device_d *dev, int accmode, const char *filename) @@ -187,14 +154,6 @@ static struct fs_driver_d omap4_usbbootfs_driver = { .read = omap4_usbbootfs_read, .opendir = omap4_usbbootfs_opendir, .stat = omap4_usbbootfs_stat, -/* - .create = omap4_usbbootfs_create, - .unlink = omap4_usbbootfs_unlink, - .mkdir = omap4_usbbootfs_mkdir, - .rmdir = omap4_usbbootfs_rmdir, - .write = omap4_usbbootfs_write, - .truncate= omap4_usbbootfs_truncate, -*/ .flags = 0, .drv = { .probe = omap4_usbbootfs_probe, diff --git a/fs/pstore/platform.c b/fs/pstore/platform.c index 0a6fa38edc..15c0174b1f 100644 --- a/fs/pstore/platform.c +++ b/fs/pstore/platform.c @@ -46,6 +46,35 @@ void pstore_set_kmsg_bytes(int bytes) static int pstore_ready; +static void pstore_console_write(const char *s, unsigned c) +{ + const char *e = s + c; + + while (s < e) { + struct pstore_record record = { + .type = PSTORE_TYPE_CONSOLE, + .psi = psinfo, + }; + + if (c > psinfo->bufsize) + c = psinfo->bufsize; + + record.buf = (char *)s; + record.size = c; + psinfo->write_buf(PSTORE_TYPE_CONSOLE, 0, &record.id, 0, + record.buf, 0, record.size, psinfo); + s += c; + c = e - s; + } +} + +static int pstore_console_puts(struct console_device *cdev, const char *s, + size_t nbytes) +{ + pstore_console_write(s, nbytes); + return nbytes; +} + void pstore_log(const char *str) { uint64_t id; diff --git a/images/.gitignore b/images/.gitignore index 2de98228a3..949f534d9a 100644 --- a/images/.gitignore +++ b/images/.gitignore @@ -23,3 +23,7 @@ pbl.lds barebox.x barebox.z +barebox.sha.bin +barebox.sum +*.pimximg +*.psimximg diff --git a/include/abort.h b/include/abort.h index 326467c25f..89ee549e34 100644 --- a/include/abort.h +++ b/include/abort.h @@ -1,9 +1,7 @@ #ifndef __ABORT_H #define __ABORT_H -#include <asm/barebox.h> - -#if defined ARCH_HAS_DATA_ABORT_MASK && !defined __PBL__ +#if defined CONFIG_ARCH_HAS_DATA_ABORT_MASK && !defined __PBL__ /* * data_abort_mask - ignore data aborts diff --git a/include/ata_drive.h b/include/ata_drive.h index 11685eef12..d61c6f11d4 100644 --- a/include/ata_drive.h +++ b/include/ata_drive.h @@ -14,7 +14,7 @@ */ #ifndef ATA_DISK_H -# define ATA_DISK +#define ATA_DISK_H #include <block.h> @@ -197,4 +197,4 @@ struct device_d; * 0x400 data data 16 bit area with 1 kiB in size */ -#endif /* ATA_DISK */ +#endif /* ATA_DISK_H */ diff --git a/include/common.h b/include/common.h index 8cc8e14fb7..6563068467 100644 --- a/include/common.h +++ b/include/common.h @@ -51,8 +51,6 @@ #error "None of __LITTLE_ENDIAN and __BIG_ENDIAN are defined" #endif -#include <asm/barebox.h> /* boot information for Linux kernel */ - /* * Function Prototypes */ @@ -72,7 +70,7 @@ int ctrlc(void); int arch_ctrlc(void); void ctrlc_handled(void); -#ifdef ARCH_HAS_STACK_DUMP +#ifdef CONFIG_ARCH_HAS_STACK_DUMP void dump_stack(void); #else static inline void dump_stack(void) diff --git a/include/console.h b/include/console.h index 4062e5abf6..7afe59e93a 100644 --- a/include/console.h +++ b/include/console.h @@ -42,7 +42,7 @@ struct console_device { int (*tstc)(struct console_device *cdev); void (*putc)(struct console_device *cdev, char c); - int (*puts)(struct console_device *cdev, const char *s); + int (*puts)(struct console_device *cdev, const char *s, size_t nbytes); int (*getc)(struct console_device *cdev); int (*setbrg)(struct console_device *cdev, int baudrate); void (*flush)(struct console_device *cdev); diff --git a/include/elf.h b/include/elf.h index 92c8d9c127..633f4992dd 100644 --- a/include/elf.h +++ b/include/elf.h @@ -400,11 +400,38 @@ static inline void arch_write_notes(struct file *file) { } struct elf_image { struct list_head list; - unsigned long entry; + u8 class; + u64 entry; void *buf; }; struct elf_image *elf_load_image(void *buf); void elf_release_image(struct elf_image *elf); +#define ELF_GET_FIELD(__s, __field, __type) \ +static inline __type elf_##__s##_##__field(struct elf_image *elf, void *arg) { \ + if (elf->class == ELFCLASS32) \ + return (__type) ((struct elf32_##__s *) arg)->__field; \ + else \ + return (__type) ((struct elf64_##__s *) arg)->__field; \ +} + +ELF_GET_FIELD(hdr, e_entry, u64) +ELF_GET_FIELD(hdr, e_phnum, u16) +ELF_GET_FIELD(hdr, e_phoff, u64) +ELF_GET_FIELD(hdr, e_type, u16) +ELF_GET_FIELD(phdr, p_paddr, u64) +ELF_GET_FIELD(phdr, p_filesz, u64) +ELF_GET_FIELD(phdr, p_memsz, u64) +ELF_GET_FIELD(phdr, p_type, u32) +ELF_GET_FIELD(phdr, p_offset, u64) + +static inline unsigned long elf_size_of_phdr(struct elf_image *elf) +{ + if (elf->class == ELFCLASS32) + return sizeof(Elf32_Phdr); + else + return sizeof(Elf64_Phdr); +} + #endif /* _LINUX_ELF_H */ diff --git a/include/gpio.h b/include/gpio.h index 1926edeca7..4d5f2c25c7 100644 --- a/include/gpio.h +++ b/include/gpio.h @@ -3,6 +3,7 @@ #include <linux/types.h> #include <linux/list.h> +#include <linux/iopoll.h> #ifdef CONFIG_GENERIC_GPIO void gpio_set_value(unsigned gpio, int value); @@ -31,6 +32,21 @@ static inline int gpio_direction_input(unsigned gpio) void gpio_set_active(unsigned gpio, bool state); int gpio_is_active(unsigned gpio); int gpio_direction_active(unsigned gpio, bool state); + +/** + * gpio_poll_timeout_us - Poll till GPIO reaches requested active state + * @gpio: gpio to poll + * @active: wait till GPIO is active if true, wait till it's inactive if false + * @timeout_us: timeout in microseconds + * + * During the wait barebox pollers are called, if any. + */ +#define gpio_poll_timeout_us(gpio, active, timeout_us) \ + ({ \ + int __state; \ + readx_poll_timeout(gpio_is_active, gpio, __state, \ + __state == (active), timeout_us); \ + }) #else static inline void gpio_set_active(unsigned gpio, int value) { @@ -43,6 +59,8 @@ static inline int gpio_direction_active(unsigned gpio, int value) { return -EINVAL; } + +#define gpio_poll_timeout_us(gpio, val, timeout_us) (-ENOSYS) #endif #if defined(CONFIG_ARCH_NR_GPIO) && CONFIG_ARCH_NR_GPIO > 0 diff --git a/include/linux/mfd/rave-sp.h b/include/linux/mfd/rave-sp.h index 7b3187cb74..92315c6e12 100644 --- a/include/linux/mfd/rave-sp.h +++ b/include/linux/mfd/rave-sp.h @@ -14,6 +14,7 @@ enum rave_sp_command { RAVE_SP_CMD_GET_FIRMWARE_VERSION = 0x20, RAVE_SP_CMD_GET_BOOTLOADER_VERSION = 0x21, + RAVE_SP_CMD_GET_OPERATIONAL_MODE = 0x25, RAVE_SP_CMD_BOOT_SOURCE = 0x26, RAVE_SP_CMD_GET_BOARD_COPPER_REV = 0x2B, RAVE_SP_CMD_GET_GPIO_STATE = 0x2F, diff --git a/include/linux/mtd/mtd-abi.h b/include/linux/mtd/mtd-abi.h index 9bca9b5e06..dfcb3554fb 100644 --- a/include/linux/mtd/mtd-abi.h +++ b/include/linux/mtd/mtd-abi.h @@ -137,7 +137,7 @@ struct nand_oobfree { }; #define MTD_MAX_OOBFREE_ENTRIES_LARGE 32 -#define MTD_MAX_ECCPOS_ENTRIES_LARGE 128 /* FIXME : understand why 448 is not working */ +#define MTD_MAX_ECCPOS_ENTRIES_LARGE 640 /* * ECC layout control structure. Exported to userspace for * diagnosis and to allow creation of raw images diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index 7f17767c69..762f9c4f2a 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -543,6 +543,8 @@ struct nand_chip { void *priv; unsigned int bbt_type; + + struct mtd_info mtd; }; /* @@ -799,4 +801,9 @@ struct nand_sdr_timings { /* get timing characteristics from ONFI timing mode. */ const struct nand_sdr_timings *onfi_async_timing_mode_to_sdr_timings(int mode); +static inline struct nand_chip *mtd_to_nand(struct mtd_info *mtd) +{ + return mtd->priv; +} + #endif /* __LINUX_MTD_NAND_H */ diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h index 33413ff955..105f381ada 100644 --- a/include/linux/mtd/spi-nor.h +++ b/include/linux/mtd/spi-nor.h @@ -64,6 +64,7 @@ #define SPINOR_OP_CLFSR 0x50 /* Clear flag status register */ #define SPINOR_OP_RDEAR 0xc8 /* Read Extended Address Register */ #define SPINOR_OP_WREAR 0xc5 /* Write Extended Address Register */ +#define SPINOR_OP_GBULK 0x98 /* Global Block Unlock Protection */ /* 4-byte address opcodes - used on Spansion and some Macronix flashes. */ #define SPINOR_OP_READ_4B 0x13 /* Read data bytes (low frequency) */ diff --git a/include/mci.h b/include/mci.h index 072008ef9d..77625ea8e9 100644 --- a/include/mci.h +++ b/include/mci.h @@ -164,6 +164,7 @@ #define EXT_CSD_EXT_PARTITIONS_ATTRIBUTE 52 /* R/W, 2 bytes */ #define EXT_CSD_EXCEPTION_EVENTS_STATUS 54 /* RO, 2 bytes */ #define EXT_CSD_EXCEPTION_EVENTS_CTRL 56 /* R/W, 2 bytes */ +#define EXT_CSD_EXCEPTION_DYNCAP_NEEDED 58 /* RO, 1 byte */ #define EXT_CSD_CLASS_6_CTRL 59 /* R/W */ #define EXT_CSD_INI_TIMEOUT_EMU 60 /* RO */ #define EXT_CSD_DATA_SECTOR_SIZE 61 /* RO */ diff --git a/include/mtd/mtd-peb.h b/include/mtd/mtd-peb.h index 23f89d89a8..311f25c3df 100644 --- a/include/mtd/mtd-peb.h +++ b/include/mtd/mtd-peb.h @@ -21,5 +21,7 @@ int mtd_num_pebs(struct mtd_info *mtd); int mtd_peb_create_bitflips(struct mtd_info *mtd, int pnum, int offset, int len, int num_bitflips, int random, int info); +int mtd_peb_write_file(struct mtd_info *mtd, int peb_start, int max_pebs, + const void *buf, size_t len); #endif /* __LINUX_MTD_MTDPEB_H */ diff --git a/include/param.h b/include/param.h index b618a2305d..dea6990497 100644 --- a/include/param.h +++ b/include/param.h @@ -272,7 +272,7 @@ static inline struct param_d *dev_add_param_string_ro(struct device_d *dev, cons } static inline struct param_d *dev_add_param_string_fixed(struct device_d *dev, const char *name, - char *value) + const char *value) { return dev_add_param_fixed(dev, name, value); } diff --git a/include/pbl.h b/include/pbl.h index 1917a7633f..787bd8293f 100644 --- a/include/pbl.h +++ b/include/pbl.h @@ -11,8 +11,6 @@ extern unsigned long free_mem_ptr; extern unsigned long free_mem_end_ptr; void pbl_barebox_uncompress(void *dest, void *compressed_start, unsigned int len); -int pbl_barebox_verify(void *compressed_start, unsigned int len, void *hash, - unsigned int hash_len); #ifdef __PBL__ #define IN_PBL 1 diff --git a/include/platform_data/elm.h b/include/platform_data/elm.h new file mode 100644 index 0000000000..bc5d2edb1d --- /dev/null +++ b/include/platform_data/elm.h @@ -0,0 +1,53 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * BCH Error Location Module + * + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + */ + +#ifndef __ELM_H +#define __ELM_H + +enum bch_ecc { + BCH4_ECC = 0, + BCH8_ECC, + BCH16_ECC, +}; + +/* ELM support 8 error syndrome process */ +#define ERROR_VECTOR_MAX 8 + +/** + * struct elm_errorvec - error vector for elm + * @error_reported: set true for vectors error is reported + * @error_uncorrectable: number of uncorrectable errors + * @error_count: number of correctable errors in the sector + * @error_loc: buffer for error location + * + */ +struct elm_errorvec { + bool error_reported; + bool error_uncorrectable; + int error_count; + int error_loc[16]; +}; + +#if IS_ENABLED(CONFIG_MTD_NAND_OMAP_ELM) +int elm_decode_bch_error_page(u8 *ecc_calc, struct elm_errorvec *err_vec); +int elm_config(enum bch_ecc bch_type, int ecc_steps, int ecc_step_size, + int ecc_syndrome_size); +#else +static inline int +elm_decode_bch_error_page(u8 *ecc_calc, struct elm_errorvec *err_vec) +{ + return -ENODEV; +} + +static inline int elm_config(enum bch_ecc bch_type, int ecc_steps, + int ecc_step_size, int ecc_syndrome_size) +{ + return -ENOSYS; +} +#endif /* CONFIG_MTD_NAND_OMAP_ELM */ + +#endif /* __ELM_H */ diff --git a/lib/Kconfig b/lib/Kconfig index f75eba9220..6216fdd6ba 100644 --- a/lib/Kconfig +++ b/lib/Kconfig @@ -165,4 +165,13 @@ config BLOBGEN select BASE64 bool "include blob encode/decode support" +config ARCH_HAS_STACK_DUMP + bool + +config ARCH_HAS_DATA_ABORT_MASK + bool + +config HAVE_EFFICIENT_UNALIGNED_ACCESS + bool + endmenu diff --git a/lib/Kconfig.ubsan b/lib/Kconfig.ubsan new file mode 100644 index 0000000000..09f4a0ab8a --- /dev/null +++ b/lib/Kconfig.ubsan @@ -0,0 +1,35 @@ +# SPDX-License-Identifier: GPL-2.0-only +config ARCH_HAS_UBSAN_SANITIZE_ALL + bool + +config UBSAN + bool "Undefined behaviour sanity checker" + help + This option enables undefined behaviour sanity checker + Compile-time instrumentation is used to detect various undefined + behaviours in runtime. + +config UBSAN_SANITIZE_ALL + bool "Enable instrumentation for all of barebox" + depends on UBSAN + depends on ARCH_HAS_UBSAN_SANITIZE_ALL + default y + help + This option activates instrumentation for all of barebox. + If you don't enable this option, you have to explicitly specify + UBSAN_SANITIZE := y for the files/directories you want to check for UB. + Enabling this option will get barebox image size increased + significantly. + +config UBSAN_NO_ALIGNMENT + bool "Disable checking of pointers alignment" + depends on UBSAN + default y if HAVE_EFFICIENT_UNALIGNED_ACCESS + help + This option disables the check of unaligned memory accesses. + This option should be used when building allmodconfig. + Disabling this option on architectures that support unaligned + accesses may produce a lot of false positives. + +config UBSAN_ALIGNMENT + def_bool !UBSAN_NO_ALIGNMENT diff --git a/lib/Makefile b/lib/Makefile index a07ceb15ab..56040a0d5f 100644 --- a/lib/Makefile +++ b/lib/Makefile @@ -71,6 +71,7 @@ obj-$(CONFIG_CRC_CCITT) += crc-ccitt.o obj-$(CONFIG_CRC8) += crc8.o obj-$(CONFIG_NLS) += nls_base.o obj-$(CONFIG_FSL_QE_FIRMWARE) += fsl-qe-firmware.o +obj-$(CONFIG_UBSAN) += ubsan.o # GCC library routines obj-$(CONFIG_GENERIC_LIB_ASHLDI3) += ashldi3.o @@ -80,6 +81,8 @@ obj-$(CONFIG_GENERIC_LIB_MULDI3) += muldi3.o pbl-$(CONFIG_GENERIC_LIB_ASHLDI3) += ashldi3.o +UBSAN_SANITIZE_ubsan.o := n + libfdt_files = fdt.o fdt_ro.o fdt_wip.o fdt_rw.o fdt_sw.o fdt_strerror.o \ fdt_empty_tree.o $(foreach file, $(libfdt_files), \ @@ -88,4 +91,3 @@ $(foreach file, $(libfdt_files), \ $(eval CFLAGS_pbl-$(file) = -I $(srctree)/scripts/dtc/libfdt)) obj-pbl-$(CONFIG_LIBFDT) += $(libfdt_files) - diff --git a/lib/gui/png_lode.c b/lib/gui/png_lode.c index 477704d976..e30db0f853 100644 --- a/lib/gui/png_lode.c +++ b/lib/gui/png_lode.c @@ -46,15 +46,16 @@ struct image *png_open(char *inbuf, int insize) LodePNGState state; int ret; unsigned error; - struct image *img = calloc(1, sizeof(struct image)); - unsigned char *png; - - if (!img) - return ERR_PTR(-ENOMEM); + struct image *img; + unsigned char *png = NULL; ret = png_uncompress_init(); if (ret) - goto err; + return ERR_PTR(ret); + + img = calloc(1, sizeof(struct image)); + if (!img) + return ERR_PTR(-ENOMEM); lodepng_state_init(&state); diff --git a/lib/libfile.c b/lib/libfile.c index b42753c2b5..3f3ec21fdb 100644 --- a/lib/libfile.c +++ b/lib/libfile.c @@ -38,7 +38,7 @@ int pwrite_full(int fd, const void *buf, size_t size, loff_t offset) now = pwrite(fd, buf, size, offset); if (now == 0) { errno = ENOSPC; - return -1; + return -errno; } if (now < 0) return now; @@ -66,7 +66,7 @@ int write_full(int fd, const void *buf, size_t size) now = write(fd, buf, size); if (now == 0) { errno = ENOSPC; - return -1; + return -errno; } if (now < 0) return now; @@ -194,6 +194,7 @@ again: buf = calloc(read_size + 1, 1); if (!buf) { ret = -ENOMEM; + errno = ENOMEM; goto err_out; } @@ -241,9 +242,9 @@ EXPORT_SYMBOL(read_file_2); * * This function reads a file to an allocated buffer. * Some TFTP servers do not transfer the size of a file. In this case - * a the file is first read to a temporary file. + * the file is first read to a temporary file. * - * Return: The buffer conataining the file or NULL on failure + * Return: The buffer containing the file or NULL on failure */ void *read_file(const char *filename, size_t *size) { diff --git a/lib/ubsan.c b/lib/ubsan.c new file mode 100644 index 0000000000..89ca6e580b --- /dev/null +++ b/lib/ubsan.c @@ -0,0 +1,442 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * UBSAN error reporting functions + * + * Copyright (c) 2014 Samsung Electronics Co., Ltd. + * Author: Andrey Ryabinin <ryabinin.a.a@gmail.com> + */ + +#include <linux/bitops.h> +#include <linux/bug.h> +#include <linux/ctype.h> +#include <init.h> +#include <linux/kernel.h> +#include <linux/types.h> + +#include "ubsan.h" + +void __ubsan_handle_add_overflow(struct overflow_data *, void *, void *); +void __ubsan_handle_sub_overflow(struct overflow_data *, void *, void *); +void __ubsan_handle_mul_overflow(struct overflow_data *, void *, void *); +void __ubsan_handle_negate_overflow(struct overflow_data *, void *); +void __ubsan_handle_divrem_overflow(struct overflow_data *, void *, void *); +void __ubsan_handle_type_mismatch(struct type_mismatch_data *, void *); +void __ubsan_handle_type_mismatch_v1(struct type_mismatch_data_v1 *, void *); +void __ubsan_handle_out_of_bounds(struct out_of_bounds_data *, void *); +void __ubsan_handle_shift_out_of_bounds(struct shift_out_of_bounds_data *, void *, void *); +void __ubsan_handle_builtin_unreachable(struct unreachable_data *); +void __ubsan_handle_load_invalid_value(struct invalid_value_data *, void *); + +const char *type_check_kinds[] = { + "load of", + "store to", + "reference binding to", + "member access within", + "member call on", + "constructor call on", + "downcast of", + "downcast of" +}; + +#define REPORTED_BIT 31 + +#if (BITS_PER_LONG == 64) && defined(__BIG_ENDIAN) +#define COLUMN_MASK (~(1U << REPORTED_BIT)) +#define LINE_MASK (~0U) +#else +#define COLUMN_MASK (~0U) +#define LINE_MASK (~(1U << REPORTED_BIT)) +#endif + +#define VALUE_LENGTH 40 + +static unsigned int in_ubsan; + +static bool was_reported(struct source_location *location) +{ + return test_and_set_bit(REPORTED_BIT, &location->reported); +} + +static void print_source_location(const char *prefix, + struct source_location *loc) +{ + pr_err("%s %s:%d:%d\n", prefix, loc->file_name, + loc->line & LINE_MASK, loc->column & COLUMN_MASK); +} + +static bool suppress_report(struct source_location *loc) +{ + return in_ubsan || was_reported(loc); +} + +static bool type_is_int(struct type_descriptor *type) +{ + return type->type_kind == type_kind_int; +} + +static bool type_is_signed(struct type_descriptor *type) +{ + WARN_ON(!type_is_int(type)); + return type->type_info & 1; +} + +static unsigned type_bit_width(struct type_descriptor *type) +{ + return 1 << (type->type_info >> 1); +} + +static bool is_inline_int(struct type_descriptor *type) +{ + unsigned inline_bits = sizeof(unsigned long)*8; + unsigned bits = type_bit_width(type); + + WARN_ON(!type_is_int(type)); + + return bits <= inline_bits; +} + +static s_max get_signed_val(struct type_descriptor *type, void *val) +{ + if (is_inline_int(type)) { + unsigned extra_bits = sizeof(s_max)*8 - type_bit_width(type); + unsigned long ulong_val = (unsigned long)val; + + return ((s_max)ulong_val) << extra_bits >> extra_bits; + } + + if (type_bit_width(type) == 64) + return *(s64 *)val; + + return *(s_max *)val; +} + +static bool val_is_negative(struct type_descriptor *type, void *val) +{ + return type_is_signed(type) && get_signed_val(type, val) < 0; +} + +static u_max get_unsigned_val(struct type_descriptor *type, void *val) +{ + if (is_inline_int(type)) + return (unsigned long)val; + + if (type_bit_width(type) == 64) + return *(u64 *)val; + + return *(u_max *)val; +} + +static void val_to_string(char *str, size_t size, struct type_descriptor *type, + void *value) +{ + if (type_is_int(type)) { + if (type_bit_width(type) == 128) { +#if defined(CONFIG_ARCH_SUPPORTS_INT128) && defined(__SIZEOF_INT128__) + u_max val = get_unsigned_val(type, value); + + scnprintf(str, size, "0x%08x%08x%08x%08x", + (u32)(val >> 96), + (u32)(val >> 64), + (u32)(val >> 32), + (u32)(val)); +#else + WARN_ON(1); +#endif + } else if (type_is_signed(type)) { + scnprintf(str, size, "%lld", + (s64)get_signed_val(type, value)); + } else { + scnprintf(str, size, "%llu", + (u64)get_unsigned_val(type, value)); + } + } +} + +static void ubsan_prologue(struct source_location *location, + unsigned long *flags) +{ + in_ubsan++; + + pr_err("========================================" + "========================================\n"); + print_source_location("UBSAN: Undefined behaviour in", location); +} + +static void ubsan_epilogue(unsigned long *flags) +{ + dump_stack(); + pr_err("========================================" + "========================================\n"); + in_ubsan--; +} + +static void handle_overflow(struct overflow_data *data, void *lhs, + void *rhs, char op) +{ + + struct type_descriptor *type = data->type; + unsigned long flags; + char lhs_val_str[VALUE_LENGTH]; + char rhs_val_str[VALUE_LENGTH]; + + if (suppress_report(&data->location)) + return; + + ubsan_prologue(&data->location, &flags); + + val_to_string(lhs_val_str, sizeof(lhs_val_str), type, lhs); + val_to_string(rhs_val_str, sizeof(rhs_val_str), type, rhs); + pr_err("%s integer overflow:\n", + type_is_signed(type) ? "signed" : "unsigned"); + pr_err("%s %c %s cannot be represented in type %s\n", + lhs_val_str, + op, + rhs_val_str, + type->type_name); + + ubsan_epilogue(&flags); +} + +void __ubsan_handle_add_overflow(struct overflow_data *data, + void *lhs, void *rhs) +{ + + handle_overflow(data, lhs, rhs, '+'); +} +EXPORT_SYMBOL(__ubsan_handle_add_overflow); + +void __ubsan_handle_sub_overflow(struct overflow_data *data, + void *lhs, void *rhs) +{ + handle_overflow(data, lhs, rhs, '-'); +} +EXPORT_SYMBOL(__ubsan_handle_sub_overflow); + +void __ubsan_handle_mul_overflow(struct overflow_data *data, + void *lhs, void *rhs) +{ + handle_overflow(data, lhs, rhs, '*'); +} +EXPORT_SYMBOL(__ubsan_handle_mul_overflow); + +void __ubsan_handle_negate_overflow(struct overflow_data *data, + void *old_val) +{ + unsigned long flags; + char old_val_str[VALUE_LENGTH]; + + if (suppress_report(&data->location)) + return; + + ubsan_prologue(&data->location, &flags); + + val_to_string(old_val_str, sizeof(old_val_str), data->type, old_val); + + pr_err("negation of %s cannot be represented in type %s:\n", + old_val_str, data->type->type_name); + + ubsan_epilogue(&flags); +} +EXPORT_SYMBOL(__ubsan_handle_negate_overflow); + + +void __ubsan_handle_divrem_overflow(struct overflow_data *data, + void *lhs, void *rhs) +{ + unsigned long flags; + char rhs_val_str[VALUE_LENGTH]; + + if (suppress_report(&data->location)) + return; + + ubsan_prologue(&data->location, &flags); + + val_to_string(rhs_val_str, sizeof(rhs_val_str), data->type, rhs); + + if (type_is_signed(data->type) && get_signed_val(data->type, rhs) == -1) + pr_err("division of %s by -1 cannot be represented in type %s\n", + rhs_val_str, data->type->type_name); + else + pr_err("division by zero\n"); + + ubsan_epilogue(&flags); +} +EXPORT_SYMBOL(__ubsan_handle_divrem_overflow); + +static void handle_null_ptr_deref(struct type_mismatch_data_common *data) +{ + unsigned long flags; + + if (suppress_report(data->location)) + return; + + ubsan_prologue(data->location, &flags); + + pr_err("%s null pointer of type %s\n", + type_check_kinds[data->type_check_kind], + data->type->type_name); + + ubsan_epilogue(&flags); +} + +static void handle_misaligned_access(struct type_mismatch_data_common *data, + unsigned long ptr) +{ + unsigned long flags; + + if (suppress_report(data->location)) + return; + + ubsan_prologue(data->location, &flags); + + pr_err("%s misaligned address %p for type %s\n", + type_check_kinds[data->type_check_kind], + (void *)ptr, data->type->type_name); + pr_err("which requires %ld byte alignment\n", data->alignment); + + ubsan_epilogue(&flags); +} + +static void handle_object_size_mismatch(struct type_mismatch_data_common *data, + unsigned long ptr) +{ + unsigned long flags; + + if (suppress_report(data->location)) + return; + + ubsan_prologue(data->location, &flags); + pr_err("%s address %p with insufficient space\n", + type_check_kinds[data->type_check_kind], + (void *) ptr); + pr_err("for an object of type %s\n", data->type->type_name); + ubsan_epilogue(&flags); +} + +static void ubsan_type_mismatch_common(struct type_mismatch_data_common *data, + unsigned long ptr) +{ + if (!ptr) + handle_null_ptr_deref(data); + else if (data->alignment && !IS_ALIGNED(ptr, data->alignment)) + handle_misaligned_access(data, ptr); + else + handle_object_size_mismatch(data, ptr); +} + +void __ubsan_handle_type_mismatch(struct type_mismatch_data *data, + void *ptr) +{ + struct type_mismatch_data_common common_data = { + .location = &data->location, + .type = data->type, + .alignment = data->alignment, + .type_check_kind = data->type_check_kind + }; + + ubsan_type_mismatch_common(&common_data, (unsigned long)ptr); +} +EXPORT_SYMBOL(__ubsan_handle_type_mismatch); + +void __ubsan_handle_type_mismatch_v1(struct type_mismatch_data_v1 *data, + void *ptr) +{ + + struct type_mismatch_data_common common_data = { + .location = &data->location, + .type = data->type, + .alignment = 1UL << data->log_alignment, + .type_check_kind = data->type_check_kind + }; + + ubsan_type_mismatch_common(&common_data, (unsigned long)ptr); +} +EXPORT_SYMBOL(__ubsan_handle_type_mismatch_v1); + +void __ubsan_handle_out_of_bounds(struct out_of_bounds_data *data, void *index) +{ + unsigned long flags; + char index_str[VALUE_LENGTH]; + + if (suppress_report(&data->location)) + return; + + ubsan_prologue(&data->location, &flags); + + val_to_string(index_str, sizeof(index_str), data->index_type, index); + pr_err("index %s is out of range for type %s\n", index_str, + data->array_type->type_name); + ubsan_epilogue(&flags); +} +EXPORT_SYMBOL(__ubsan_handle_out_of_bounds); + +void __ubsan_handle_shift_out_of_bounds(struct shift_out_of_bounds_data *data, + void *lhs, void *rhs) +{ + unsigned long flags; + struct type_descriptor *rhs_type = data->rhs_type; + struct type_descriptor *lhs_type = data->lhs_type; + char rhs_str[VALUE_LENGTH]; + char lhs_str[VALUE_LENGTH]; + + if (suppress_report(&data->location)) + return; + + ubsan_prologue(&data->location, &flags); + + val_to_string(rhs_str, sizeof(rhs_str), rhs_type, rhs); + val_to_string(lhs_str, sizeof(lhs_str), lhs_type, lhs); + + if (val_is_negative(rhs_type, rhs)) + pr_err("shift exponent %s is negative\n", rhs_str); + + else if (get_unsigned_val(rhs_type, rhs) >= + type_bit_width(lhs_type)) + pr_err("shift exponent %s is too large for %u-bit type %s\n", + rhs_str, + type_bit_width(lhs_type), + lhs_type->type_name); + else if (val_is_negative(lhs_type, lhs)) + pr_err("left shift of negative value %s\n", + lhs_str); + else + pr_err("left shift of %s by %s places cannot be" + " represented in type %s\n", + lhs_str, rhs_str, + lhs_type->type_name); + + ubsan_epilogue(&flags); +} +EXPORT_SYMBOL(__ubsan_handle_shift_out_of_bounds); + + +void __ubsan_handle_builtin_unreachable(struct unreachable_data *data) +{ + unsigned long flags; + + ubsan_prologue(&data->location, &flags); + pr_err("calling __builtin_unreachable()\n"); + ubsan_epilogue(&flags); + panic("can't return from __builtin_unreachable()"); +} +EXPORT_SYMBOL(__ubsan_handle_builtin_unreachable); + +void __ubsan_handle_load_invalid_value(struct invalid_value_data *data, + void *val) +{ + unsigned long flags; + char val_str[VALUE_LENGTH]; + + if (suppress_report(&data->location)) + return; + + ubsan_prologue(&data->location, &flags); + + val_to_string(val_str, sizeof(val_str), data->type, val); + + pr_err("load of value %s is not a valid value for type %s\n", + val_str, data->type->type_name); + + ubsan_epilogue(&flags); +} +EXPORT_SYMBOL(__ubsan_handle_load_invalid_value); diff --git a/lib/ubsan.h b/lib/ubsan.h new file mode 100644 index 0000000000..7bbedd4b78 --- /dev/null +++ b/lib/ubsan.h @@ -0,0 +1,89 @@ + /* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _LIB_UBSAN_H +#define _LIB_UBSAN_H + +enum { + type_kind_int = 0, + type_kind_float = 1, + type_unknown = 0xffff +}; + +struct type_descriptor { + u16 type_kind; + u16 type_info; + char type_name[1]; +}; + +struct source_location { + const char *file_name; + union { + unsigned long reported; + struct { + u32 line; + u32 column; + }; + }; +}; + +struct overflow_data { + struct source_location location; + struct type_descriptor *type; +}; + +struct type_mismatch_data { + struct source_location location; + struct type_descriptor *type; + unsigned long alignment; + unsigned char type_check_kind; +}; + +struct type_mismatch_data_v1 { + struct source_location location; + struct type_descriptor *type; + unsigned char log_alignment; + unsigned char type_check_kind; +}; + +struct type_mismatch_data_common { + struct source_location *location; + struct type_descriptor *type; + unsigned long alignment; + unsigned char type_check_kind; +}; + +struct nonnull_arg_data { + struct source_location location; + struct source_location attr_location; + int arg_index; +}; + +struct out_of_bounds_data { + struct source_location location; + struct type_descriptor *array_type; + struct type_descriptor *index_type; +}; + +struct shift_out_of_bounds_data { + struct source_location location; + struct type_descriptor *lhs_type; + struct type_descriptor *rhs_type; +}; + +struct unreachable_data { + struct source_location location; +}; + +struct invalid_value_data { + struct source_location location; + struct type_descriptor *type; +}; + +#if defined(CONFIG_ARCH_SUPPORTS_INT128) && defined(__SIZEOF_INT128__) +typedef __int128 s_max; +typedef unsigned __int128 u_max; +#else +typedef s64 s_max; +typedef u64 u_max; +#endif + +#endif @@ -502,7 +502,7 @@ static int nfs_readlink_reply(unsigned char *pkt, unsigned len) { uint32_t *data; char *path; - int rlen; + unsigned int rlen; int ret; ret = rpc_check_reply(pkt, 1); @@ -515,6 +515,9 @@ static int nfs_readlink_reply(unsigned char *pkt, unsigned len) rlen = ntohl(net_read_uint32(data)); /* new path length */ + rlen = max_t(unsigned int, rlen, + len - sizeof(struct rpc_reply) - sizeof(uint32_t)); + data++; path = (char *)data; diff --git a/pbl/decomp.c b/pbl/decomp.c index ef713a6c74..1e0ef81ada 100644 --- a/pbl/decomp.c +++ b/pbl/decomp.c @@ -51,16 +51,11 @@ static void noinline errorfn(char *error) while (1); } -void pbl_barebox_uncompress(void *dest, void *compressed_start, unsigned int len) -{ - decompress((void *)compressed_start, - len, - NULL, NULL, - dest, NULL, errorfn); -} +extern unsigned char sha_sum[]; +extern unsigned char sha_sum_end[]; -int pbl_barebox_verify(void *compressed_start, unsigned int len, void *hash, - unsigned int hash_len) +static int pbl_barebox_verify(void *compressed_start, unsigned int len, void *hash, + unsigned int hash_len) { struct sha256_state sha_state = { 0 }; struct digest d = { .ctx = &sha_state }; @@ -93,3 +88,25 @@ int pbl_barebox_verify(void *compressed_start, unsigned int len, void *hash, return memcmp(hash, computed_hash, SHA256_DIGEST_SIZE); } + +void pbl_barebox_uncompress(void *dest, void *compressed_start, unsigned int len) +{ + uint32_t pbl_hash_len; + void *pbl_hash_start, *pbl_hash_end; + + if (IS_ENABLED(CONFIG_PBL_VERIFY_PIGGY)) { + pbl_hash_start = sha_sum; + pbl_hash_end = sha_sum_end; + pbl_hash_len = pbl_hash_end - pbl_hash_start; + if (pbl_barebox_verify(compressed_start, len, pbl_hash_start, + pbl_hash_len) != 0) { + putc_ll('!'); + panic("hash mismatch, refusing to decompress"); + } + } + + decompress((void *)compressed_start, + len, + NULL, NULL, + dest, NULL, errorfn); +} diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib index fc5fe3d7e8..c4d307ae30 100644 --- a/scripts/Makefile.lib +++ b/scripts/Makefile.lib @@ -120,6 +120,14 @@ _c_flags = $(CFLAGS) $(EXTRA_CFLAGS) $(CFLAGS_$(basetarget).o) _a_flags = $(AFLAGS) $(EXTRA_AFLAGS) $(AFLAGS_$(basetarget).o) _cpp_flags = $(CPPFLAGS) $(EXTRA_CPPFLAGS) $(CPPFLAGS_$(@F)) +ifeq ($(CONFIG_UBSAN),y) +_CFLAGS_UBSAN = $(eval _CFLAGS_UBSAN := $(CFLAGS_UBSAN))$(_CFLAGS_UBSAN) +_c_flags += $(if $(patsubst n%,, \ + $(UBSAN_SANITIZE_$(basetarget).o)$(UBSAN_SANITIZE)$(CONFIG_UBSAN_SANITIZE_ALL)), \ + $(_CFLAGS_UBSAN)) +PBL_CPPFLAGS += $(call cc-option,-fno-sanitize=all) +endif + # If building barebox in a separate objtree expand all occurrences # of -Idir to -I$(srctree)/dir except for absolute paths (starting with '/'). diff --git a/scripts/Makefile.ubsan b/scripts/Makefile.ubsan new file mode 100644 index 0000000000..019771b845 --- /dev/null +++ b/scripts/Makefile.ubsan @@ -0,0 +1,19 @@ +# SPDX-License-Identifier: GPL-2.0 +ifdef CONFIG_UBSAN + CFLAGS_UBSAN += $(call cc-option, -fsanitize=shift) + CFLAGS_UBSAN += $(call cc-option, -fsanitize=integer-divide-by-zero) + CFLAGS_UBSAN += $(call cc-option, -fsanitize=unreachable) + CFLAGS_UBSAN += $(call cc-option, -fsanitize=signed-integer-overflow) + CFLAGS_UBSAN += $(call cc-option, -fsanitize=bounds) + CFLAGS_UBSAN += $(call cc-option, -fsanitize=object-size) + CFLAGS_UBSAN += $(call cc-option, -fsanitize=bool) + CFLAGS_UBSAN += $(call cc-option, -fsanitize=enum) + +ifdef CONFIG_UBSAN_ALIGNMENT + CFLAGS_UBSAN += $(call cc-option, -fsanitize=alignment) +endif + + # -fsanitize=* options makes GCC less smart than usual and + # increase number of 'maybe-uninitialized false-positives + CFLAGS_UBSAN += $(call cc-option, -Wno-maybe-uninitialized) +endif |